8703 files changed, 308924 insertions, 160203 deletions

diff --git a/Documentation/00-INDEX b/Documentation/00-INDEX
index 1977fab38656..5b5aba404aac 100644
--- a/Documentation/00-INDEX
+++ b/Documentation/00-INDEX
@@ -89,8 +89,6 @@ cciss.txt
 	- info, major/minor #'s for Compaq's SMART Array Controllers.
 cdrom/
 	- directory with information on the CD-ROM drivers that Linux has.
-cli-sti-removal.txt
-	- cli()/sti() removal guide.
 computone.txt
 	- info on Computone Intelliport II/Plus Multiport Serial Driver.
 connector/
@@ -361,8 +359,6 @@ telephony/
 	- directory with info on telephony (e.g. voice over IP) support.
 time_interpolators.txt
 	- info on time interpolators.
-tipar.txt
-	- information about Parallel link cable for Texas Instruments handhelds.
 tty.txt
 	- guide to the locking policies of the tty layer.
 uml/
diff --git a/Documentation/ABI/testing/sysfs-class-regulator b/Documentation/ABI/testing/sysfs-class-regulator
new file mode 100644
index 000000000000..79a4a75b2d2c
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-class-regulator
@@ -0,0 +1,315 @@
+What:		/sys/class/regulator/.../state
+Date:		April 2008
+KernelVersion:	2.6.26
+Contact:	Liam Girdwood <lg@opensource.wolfsonmicro.com>
+Description:
+		Each regulator directory will contain a field called
+		state. This holds the regulator output state.
+
+		This will be one of the following strings:
+
+		'enabled'
+		'disabled'
+		'unknown'
+
+		'enabled' means the regulator output is ON and is supplying
+		power to the system.
+
+		'disabled' means the regulator output is OFF and is not
+		supplying power to the system..
+
+		'unknown' means software cannot determine the state.
+
+		NOTE: this field can be used in conjunction with microvolts
+		and microamps to determine regulator output levels.
+
+
+What:		/sys/class/regulator/.../type
+Date:		April 2008
+KernelVersion:	2.6.26
+Contact:	Liam Girdwood <lg@opensource.wolfsonmicro.com>
+Description:
+		Each regulator directory will contain a field called
+		type. This holds the regulator type.
+
+		This will be one of the following strings:
+
+		'voltage'
+		'current'
+		'unknown'
+
+		'voltage' means the regulator output voltage can be controlled
+		by software.
+
+		'current' means the regulator output current limit can be
+		controlled by software.
+
+		'unknown' means software cannot control either voltage or
+		current limit.
+
+
+What:		/sys/class/regulator/.../microvolts
+Date:		April 2008
+KernelVersion:	2.6.26
+Contact:	Liam Girdwood <lg@opensource.wolfsonmicro.com>
+Description:
+		Each regulator directory will contain a field called
+		microvolts. This holds the regulator output voltage setting
+		measured in microvolts (i.e. E-6 Volts).
+
+		NOTE: This value should not be used to determine the regulator
+		output voltage level as this value is the same regardless of
+		whether the regulator is enabled or disabled.
+
+
+What:		/sys/class/regulator/.../microamps
+Date:		April 2008
+KernelVersion:	2.6.26
+Contact:	Liam Girdwood <lg@opensource.wolfsonmicro.com>
+Description:
+		Each regulator directory will contain a field called
+		microamps. This holds the regulator output current limit
+		setting measured in microamps (i.e. E-6 Amps).
+
+		NOTE: This value should not be used to determine the regulator
+		output current level as this value is the same regardless of
+		whether the regulator is enabled or disabled.
+
+
+What:		/sys/class/regulator/.../opmode
+Date:		April 2008
+KernelVersion:	2.6.26
+Contact:	Liam Girdwood <lg@opensource.wolfsonmicro.com>
+Description:
+		Each regulator directory will contain a field called
+		opmode. This holds the regulator operating mode setting.
+
+		The opmode value can be one of the following strings:
+
+		'fast'
+		'normal'
+		'idle'
+		'standby'
+		'unknown'
+
+		The modes are described in include/linux/regulator/regulator.h
+
+		NOTE: This value should not be used to determine the regulator
+		output operating mode as this value is the same regardless of
+		whether the regulator is enabled or disabled.
+
+
+What:		/sys/class/regulator/.../min_microvolts
+Date:		April 2008
+KernelVersion:	2.6.26
+Contact:	Liam Girdwood <lg@opensource.wolfsonmicro.com>
+Description:
+		Each regulator directory will contain a field called
+		min_microvolts. This holds the minimum safe working regulator
+		output voltage setting for this domain measured in microvolts.
+
+		NOTE: this will return the string 'constraint not defined' if
+		the power domain has no min microvolts constraint defined by
+		platform code.
+
+
+What:		/sys/class/regulator/.../max_microvolts
+Date:		April 2008
+KernelVersion:	2.6.26
+Contact:	Liam Girdwood <lg@opensource.wolfsonmicro.com>
+Description:
+		Each regulator directory will contain a field called
+		max_microvolts. This holds the maximum safe working regulator
+		output voltage setting for this domain measured in microvolts.
+
+		NOTE: this will return the string 'constraint not defined' if
+		the power domain has no max microvolts constraint defined by
+		platform code.
+
+
+What:		/sys/class/regulator/.../min_microamps
+Date:		April 2008
+KernelVersion:	2.6.26
+Contact:	Liam Girdwood <lg@opensource.wolfsonmicro.com>
+Description:
+		Each regulator directory will contain a field called
+		min_microamps. This holds the minimum safe working regulator
+		output current limit setting for this domain measured in
+		microamps.
+
+		NOTE: this will return the string 'constraint not defined' if
+		the power domain has no min microamps constraint defined by
+		platform code.
+
+
+What:		/sys/class/regulator/.../max_microamps
+Date:		April 2008
+KernelVersion:	2.6.26
+Contact:	Liam Girdwood <lg@opensource.wolfsonmicro.com>
+Description:
+		Each regulator directory will contain a field called
+		max_microamps. This holds the maximum safe working regulator
+		output current limit setting for this domain measured in
+		microamps.
+
+		NOTE: this will return the string 'constraint not defined' if
+		the power domain has no max microamps constraint defined by
+		platform code.
+
+
+What:		/sys/class/regulator/.../num_users
+Date:		April 2008
+KernelVersion:	2.6.26
+Contact:	Liam Girdwood <lg@opensource.wolfsonmicro.com>
+Description:
+		Each regulator directory will contain a field called
+		num_users. This holds the number of consumer devices that
+		have called regulator_enable() on this regulator.
+
+
+What:		/sys/class/regulator/.../requested_microamps
+Date:		April 2008
+KernelVersion:	2.6.26
+Contact:	Liam Girdwood <lg@opensource.wolfsonmicro.com>
+Description:
+		Each regulator directory will contain a field called
+		requested_microamps. This holds the total requested load
+		current in microamps for this regulator from all its consumer
+		devices.
+
+
+What:		/sys/class/regulator/.../parent
+Date:		April 2008
+KernelVersion:	2.6.26
+Contact:	Liam Girdwood <lg@opensource.wolfsonmicro.com>
+Description:
+		Some regulator directories will contain a link called parent.
+		This points to the parent or supply regulator if one exists.
+
+What:		/sys/class/regulator/.../suspend_mem_microvolts
+Date:		May 2008
+KernelVersion:	2.6.26
+Contact:	Liam Girdwood <lg@opensource.wolfsonmicro.com>
+Description:
+		Each regulator directory will contain a field called
+		suspend_mem_microvolts. This holds the regulator output
+		voltage setting for this domain measured in microvolts when
+		the system is suspended to memory.
+
+		NOTE: this will return the string 'not defined' if
+		the power domain has no suspend to memory voltage defined by
+		platform code.
+
+What:		/sys/class/regulator/.../suspend_disk_microvolts
+Date:		May 2008
+KernelVersion:	2.6.26
+Contact:	Liam Girdwood <lg@opensource.wolfsonmicro.com>
+Description:
+		Each regulator directory will contain a field called
+		suspend_disk_microvolts. This holds the regulator output
+		voltage setting for this domain measured in microvolts when
+		the system is suspended to disk.
+
+		NOTE: this will return the string 'not defined' if
+		the power domain has no suspend to disk voltage defined by
+		platform code.
+
+What:		/sys/class/regulator/.../suspend_standby_microvolts
+Date:		May 2008
+KernelVersion:	2.6.26
+Contact:	Liam Girdwood <lg@opensource.wolfsonmicro.com>
+Description:
+		Each regulator directory will contain a field called
+		suspend_standby_microvolts. This holds the regulator output
+		voltage setting for this domain measured in microvolts when
+		the system is suspended to standby.
+
+		NOTE: this will return the string 'not defined' if
+		the power domain has no suspend to standby voltage defined by
+		platform code.
+
+What:		/sys/class/regulator/.../suspend_mem_mode
+Date:		May 2008
+KernelVersion:	2.6.26
+Contact:	Liam Girdwood <lg@opensource.wolfsonmicro.com>
+Description:
+		Each regulator directory will contain a field called
+		suspend_mem_mode. This holds the regulator operating mode
+		setting for this domain when the system is suspended to
+		memory.
+
+		NOTE: this will return the string 'not defined' if
+		the power domain has no suspend to memory mode defined by
+		platform code.
+
+What:		/sys/class/regulator/.../suspend_disk_mode
+Date:		May 2008
+KernelVersion:	2.6.26
+Contact:	Liam Girdwood <lg@opensource.wolfsonmicro.com>
+Description:
+		Each regulator directory will contain a field called
+		suspend_disk_mode. This holds the regulator operating mode
+		setting for this domain when the system is suspended to disk.
+
+		NOTE: this will return the string 'not defined' if
+		the power domain has no suspend to disk mode defined by
+		platform code.
+
+What:		/sys/class/regulator/.../suspend_standby_mode
+Date:		May 2008
+KernelVersion:	2.6.26
+Contact:	Liam Girdwood <lg@opensource.wolfsonmicro.com>
+Description:
+		Each regulator directory will contain a field called
+		suspend_standby_mode. This holds the regulator operating mode
+		setting for this domain when the system is suspended to
+		standby.
+
+		NOTE: this will return the string 'not defined' if
+		the power domain has no suspend to standby mode defined by
+		platform code.
+
+What:		/sys/class/regulator/.../suspend_mem_state
+Date:		May 2008
+KernelVersion:	2.6.26
+Contact:	Liam Girdwood <lg@opensource.wolfsonmicro.com>
+Description:
+		Each regulator directory will contain a field called
+		suspend_mem_state. This holds the regulator operating state
+		when suspended to memory.
+
+		This will be one of the following strings:
+
+		'enabled'
+		'disabled'
+		'not defined'
+
+What:		/sys/class/regulator/.../suspend_disk_state
+Date:		May 2008
+KernelVersion:	2.6.26
+Contact:	Liam Girdwood <lg@opensource.wolfsonmicro.com>
+Description:
+		Each regulator directory will contain a field called
+		suspend_disk_state. This holds the regulator operating state
+		when suspended to disk.
+
+		This will be one of the following strings:
+
+		'enabled'
+		'disabled'
+		'not defined'
+
+What:		/sys/class/regulator/.../suspend_standby_state
+Date:		May 2008
+KernelVersion:	2.6.26
+Contact:	Liam Girdwood <lg@opensource.wolfsonmicro.com>
+Description:
+		Each regulator directory will contain a field called
+		suspend_standby_state. This holds the regulator operating
+		state when suspended to standby.
+
+		This will be one of the following strings:
+
+		'enabled'
+		'disabled'
+		'not defined'
diff --git a/Documentation/ABI/testing/sysfs-firmware-sgi_uv b/Documentation/ABI/testing/sysfs-firmware-sgi_uv
new file mode 100644
index 000000000000..4573fd4b7876
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-firmware-sgi_uv
@@ -0,0 +1,27 @@
+What:		/sys/firmware/sgi_uv/
+Date:		August 2008
+Contact:	Russ Anderson <rja@sgi.com>
+Description:
+		The /sys/firmware/sgi_uv directory contains information
+		about the SGI UV platform.
+
+		Under that directory are a number of files:
+
+			partition_id
+			coherence_id
+
+		The partition_id entry contains the partition id.
+		SGI UV systems can be partitioned into multiple physical
+		machines, which each partition running a unique copy
+		of the operating system.  Each partition will have a unique
+		partition id.  To display the partition id, use the command:
+
+			cat /sys/firmware/sgi_uv/partition_id
+
+		The coherence_id entry contains the coherence id.
+		A partitioned SGI UV system can have one or more coherence
+		domain.  The coherence id indicates which coherence domain
+		this partition is in.  To display the coherence id, use the
+		command:
+
+			cat /sys/firmware/sgi_uv/coherence_id
diff --git a/Documentation/CodingStyle b/Documentation/CodingStyle
index 6caa14615578..1875e502f872 100644
--- a/Documentation/CodingStyle
+++ b/Documentation/CodingStyle
@@ -474,25 +474,29 @@ make a good program).
 So, you can either get rid of GNU emacs, or change it to use saner
 values.  To do the latter, you can stick the following in your .emacs file:
 
-(defun linux-c-mode ()
-  "C mode with adjusted defaults for use with the Linux kernel."
-  (interactive)
-  (c-mode)
-  (c-set-style "K&R")
-  (setq tab-width 8)
-  (setq indent-tabs-mode t)
-  (setq c-basic-offset 8))
-
-This will define the M-x linux-c-mode command.  When hacking on a
-module, if you put the string -*- linux-c -*- somewhere on the first
-two lines, this mode will be automatically invoked. Also, you may want
-to add
-
-(setq auto-mode-alist (cons '("/usr/src/linux.*/.*\\.[ch]$" . linux-c-mode)
-			auto-mode-alist))
-
-to your .emacs file if you want to have linux-c-mode switched on
-automagically when you edit source files under /usr/src/linux.
+(defun c-lineup-arglist-tabs-only (ignored)
+  "Line up argument lists by tabs, not spaces"
+  (let* ((anchor (c-langelem-pos c-syntactic-element))
+	 (column (c-langelem-2nd-pos c-syntactic-element))
+	 (offset (- (1+ column) anchor))
+	 (steps (floor offset c-basic-offset)))
+    (* (max steps 1)
+       c-basic-offset)))
+
+(add-hook 'c-mode-hook
+          (lambda ()
+            (let ((filename (buffer-file-name)))
+              ;; Enable kernel mode for the appropriate files
+              (when (and filename
+                         (string-match "~/src/linux-trees" filename))
+                (setq indent-tabs-mode t)
+                (c-set-style "linux")
+                (c-set-offset 'arglist-cont-nonempty
+                              '(c-lineup-gcc-asm-reg
+                                c-lineup-arglist-tabs-only))))))
+
+This will make emacs go better with the kernel coding style for C
+files below ~/src/linux-trees.
 
 But even if you fail in getting emacs to do sane formatting, not
 everything is lost: use "indent".
diff --git a/Documentation/DMA-API.txt b/Documentation/DMA-API.txt
index 80d150458c80..d8b63d164e41 100644
--- a/Documentation/DMA-API.txt
+++ b/Documentation/DMA-API.txt
@@ -298,10 +298,10 @@ recommended that you never use these unless you really know what the
 cache width is.
 
 int
-dma_mapping_error(dma_addr_t dma_addr)
+dma_mapping_error(struct device *dev, dma_addr_t dma_addr)
 
 int
-pci_dma_mapping_error(dma_addr_t dma_addr)
+pci_dma_mapping_error(struct pci_dev *hwdev, dma_addr_t dma_addr)
 
 In some circumstances dma_map_single and dma_map_page will fail to create
 a mapping. A driver can check for these errors by testing the returned
diff --git a/Documentation/DocBook/Makefile b/Documentation/DocBook/Makefile
index 0eb0d027eb32..1615350b7b53 100644
--- a/Documentation/DocBook/Makefile
+++ b/Documentation/DocBook/Makefile
@@ -12,7 +12,7 @@ DOCBOOKS := wanbook.xml z8530book.xml mcabook.xml videobook.xml \
 	    kernel-api.xml filesystems.xml lsm.xml usb.xml kgdb.xml \
 	    gadget.xml libata.xml mtdnand.xml librs.xml rapidio.xml \
 	    genericirq.xml s390-drivers.xml uio-howto.xml scsi.xml \
-	    mac80211.xml debugobjects.xml
+	    mac80211.xml debugobjects.xml sh.xml
 
 ###
 # The build process is as follows (targets):
@@ -102,6 +102,13 @@ C-procfs-example = procfs_example.xml
 C-procfs-example2 = $(addprefix $(obj)/,$(C-procfs-example))
 $(obj)/procfs-guide.xml: $(C-procfs-example2)
 
+# List of programs to build
+##oops, this is a kernel module::hostprogs-y := procfs_example
+obj-m += procfs_example.o
+
+# Tell kbuild to always build the programs
+always := $(hostprogs-y)
+
 notfoundtemplate = echo "*** You have to install docbook-utils or xmlto ***"; \
 		   exit 1
 db2xtemplate = db2TYPE -o $(dir $@) $<
diff --git a/Documentation/DocBook/kgdb.tmpl b/Documentation/DocBook/kgdb.tmpl
index e8acd1f03456..372dec20c8da 100644
--- a/Documentation/DocBook/kgdb.tmpl
+++ b/Documentation/DocBook/kgdb.tmpl
@@ -98,6 +98,24 @@
     "Kernel debugging" select "KGDB: kernel debugging with remote gdb".
     </para>
     <para>
+    It is advised, but not required that you turn on the
+    CONFIG_FRAME_POINTER kernel option.  This option inserts code to
+    into the compiled executable which saves the frame information in
+    registers or on the stack at different points which will allow a
+    debugger such as gdb to more accurately construct stack back traces
+    while debugging the kernel.
+    </para>
+    <para>
+    If the architecture that you are using supports the kernel option
+    CONFIG_DEBUG_RODATA, you should consider turning it off.  This
+    option will prevent the use of software breakpoints because it
+    marks certain regions of the kernel's memory space as read-only.
+    If kgdb supports it for the architecture you are using, you can
+    use hardware breakpoints if you desire to run with the
+    CONFIG_DEBUG_RODATA option turned on, else you need to turn off
+    this option.
+    </para>
+    <para>
     Next you should choose one of more I/O drivers to interconnect debugging
     host and debugged target.  Early boot debugging requires a KGDB
     I/O driver that supports early debugging and the driver must be
diff --git a/Documentation/DocBook/procfs-guide.tmpl b/Documentation/DocBook/procfs-guide.tmpl
index 1fd6a1ec7591..8a5dc6e021ff 100644
--- a/Documentation/DocBook/procfs-guide.tmpl
+++ b/Documentation/DocBook/procfs-guide.tmpl
@@ -29,12 +29,12 @@
 
     <revhistory>
       <revision>
-	<revnumber>1.0&nbsp;</revnumber>
+	<revnumber>1.0</revnumber>
 	<date>May 30, 2001</date>
 	<revremark>Initial revision posted to linux-kernel</revremark>
       </revision>
       <revision>
-	<revnumber>1.1&nbsp;</revnumber>
+	<revnumber>1.1</revnumber>
 	<date>June 3, 2001</date>
 	<revremark>Revised after comments from linux-kernel</revremark>
       </revision>
diff --git a/Documentation/DocBook/procfs_example.c b/Documentation/DocBook/procfs_example.c
index 7064084c1c5e..2f3de0fb8365 100644
--- a/Documentation/DocBook/procfs_example.c
+++ b/Documentation/DocBook/procfs_example.c
@@ -189,8 +189,6 @@ static int __init init_procfs_example(void)
 	return 0;
 
 no_symlink:
-	remove_proc_entry("tty", example_dir);
-no_tty:
 	remove_proc_entry("bar", example_dir);
 no_bar:
 	remove_proc_entry("foo", example_dir);
@@ -206,7 +204,6 @@ out:
 static void __exit cleanup_procfs_example(void)
 {
 	remove_proc_entry("jiffies_too", example_dir);
-	remove_proc_entry("tty", example_dir);
 	remove_proc_entry("bar", example_dir);
 	remove_proc_entry("foo", example_dir);
 	remove_proc_entry("jiffies", example_dir);
@@ -222,3 +219,4 @@ module_exit(cleanup_procfs_example);
 
 MODULE_AUTHOR("Erik Mouw");
 MODULE_DESCRIPTION("procfs examples");
+MODULE_LICENSE("GPL");
diff --git a/Documentation/DocBook/s390-drivers.tmpl b/Documentation/DocBook/s390-drivers.tmpl
index 4acc73240a6d..95bfc12e5439 100644
--- a/Documentation/DocBook/s390-drivers.tmpl
+++ b/Documentation/DocBook/s390-drivers.tmpl
@@ -100,7 +100,7 @@
       the hardware structures represented here, please consult the Principles
       of Operation.
     </para>
-!Iinclude/asm-s390/cio.h
+!Iarch/s390/include/asm/cio.h
     </sect1>
     <sect1 id="ccwdev">
      <title>ccw devices</title>
@@ -114,7 +114,7 @@
       ccw device structure. Device drivers must not bypass those functions
       or strange side effects may happen.
     </para>
-!Iinclude/asm-s390/ccwdev.h
+!Iarch/s390/include/asm/ccwdev.h
 !Edrivers/s390/cio/device.c
 !Edrivers/s390/cio/device_ops.c
     </sect1>
@@ -125,7 +125,7 @@
 	measurement data which is made available by the channel subsystem
 	for each channel attached device.
   </para>
-!Iinclude/asm-s390/cmb.h
+!Iarch/s390/include/asm/cmb.h
 !Edrivers/s390/cio/cmf.c
     </sect1>
   </chapter>
@@ -142,7 +142,7 @@
   </para>
    <sect1 id="ccwgroupdevices">
     <title>ccw group devices</title>
-!Iinclude/asm-s390/ccwgroup.h
+!Iarch/s390/include/asm/ccwgroup.h
 !Edrivers/s390/cio/ccwgroup.c
    </sect1>
   </chapter>
diff --git a/Documentation/DocBook/sh.tmpl b/Documentation/DocBook/sh.tmpl
new file mode 100644
index 000000000000..0c3dc4c69dd1
--- /dev/null
+++ b/Documentation/DocBook/sh.tmpl
@@ -0,0 +1,105 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<!DOCTYPE book PUBLIC "-//OASIS//DTD DocBook XML V4.1.2//EN"
+	"http://www.oasis-open.org/docbook/xml/4.1.2/docbookx.dtd" []>
+
+<book id="sh-drivers">
+ <bookinfo>
+  <title>SuperH Interfaces Guide</title>
+  
+  <authorgroup>
+   <author>
+    <firstname>Paul</firstname>
+    <surname>Mundt</surname>
+    <affiliation>
+     <address>
+      <email>lethal@linux-sh.org</email>
+     </address>
+    </affiliation>
+   </author>
+  </authorgroup>
+
+  <copyright>
+   <year>2008</year>
+   <holder>Paul Mundt</holder>
+  </copyright>
+  <copyright>
+   <year>2008</year>
+   <holder>Renesas Technology Corp.</holder>
+  </copyright>
+
+  <legalnotice>
+   <para>
+     This documentation is free software; you can redistribute
+     it and/or modify it under the terms of the GNU General Public
+     License version 2 as published by the Free Software Foundation.
+   </para>
+      
+   <para>
+     This program is distributed in the hope that it will be
+     useful, but WITHOUT ANY WARRANTY; without even the implied
+     warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+     See the GNU General Public License for more details.
+   </para>
+      
+   <para>
+     You should have received a copy of the GNU General Public
+     License along with this program; if not, write to the Free
+     Software Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+     MA 02111-1307 USA
+   </para>
+      
+   <para>
+     For more details see the file COPYING in the source
+     distribution of Linux.
+   </para>
+  </legalnotice>
+ </bookinfo>
+
+<toc></toc>
+
+  <chapter id="mm">
+    <title>Memory Management</title>
+    <sect1 id="sh4">
+    <title>SH-4</title>
+      <sect2 id="sq">
+        <title>Store Queue API</title>
+!Earch/sh/kernel/cpu/sh4/sq.c
+      </sect2>
+    </sect1>
+    <sect1 id="sh5">
+      <title>SH-5</title>
+      <sect2 id="tlb">
+	<title>TLB Interfaces</title>
+!Iarch/sh/mm/tlb-sh5.c
+!Iarch/sh/include/asm/tlb_64.h
+      </sect2>
+    </sect1>
+  </chapter>
+  <chapter id="clk">
+    <title>Clock Framework Extensions</title>
+!Iarch/sh/include/asm/clock.h
+  </chapter>
+  <chapter id="mach">
+    <title>Machine Specific Interfaces</title>
+    <sect1 id="dreamcast">
+      <title>mach-dreamcast</title>
+!Iarch/sh/boards/mach-dreamcast/rtc.c
+    </sect1>
+    <sect1 id="x3proto">
+      <title>mach-x3proto</title>
+!Earch/sh/boards/mach-x3proto/ilsel.c
+    </sect1>
+  </chapter>
+  <chapter id="busses">
+    <title>Busses</title>
+    <sect1 id="superhyway">
+      <title>SuperHyway</title>
+!Edrivers/sh/superhyway/superhyway.c
+    </sect1>
+
+    <sect1 id="maple">
+      <title>Maple</title>
+!Edrivers/sh/maple/maple.c
+    </sect1>
+  </chapter>
+</book>
diff --git a/Documentation/DocBook/videobook.tmpl b/Documentation/DocBook/videobook.tmpl
index 89817795e668..0bc25949b668 100644
--- a/Documentation/DocBook/videobook.tmpl
+++ b/Documentation/DocBook/videobook.tmpl
@@ -1648,7 +1648,7 @@ static struct video_buffer capture_fb;
 
   <chapter id="pubfunctions">
      <title>Public Functions Provided</title>
-!Edrivers/media/video/videodev.c
+!Edrivers/media/video/v4l2-dev.c
   </chapter>
 
 </book>
diff --git a/Documentation/DocBook/z8530book.tmpl b/Documentation/DocBook/z8530book.tmpl
index 42c75ba71ba2..a42a8a4c7689 100644
--- a/Documentation/DocBook/z8530book.tmpl
+++ b/Documentation/DocBook/z8530book.tmpl
@@ -69,12 +69,6 @@
 	device to be used as both a tty interface and as a synchronous 
 	controller is a project for Linux post the 2.4 release
   </para>
-  <para>
-	The support code handles most common card configurations and
-	supports running both Cisco HDLC and Synchronous PPP. With extra
-	glue the frame relay and X.25 protocols can also be used with this
-	driver.
-  </para>
   </chapter>
   
   <chapter id="Driver_Modes">
@@ -179,35 +173,27 @@
   <para>
 	If you wish to use the network interface facilities of the driver,
 	then you need to attach a network device to each channel that is
-	present and in use. In addition to use the SyncPPP and Cisco HDLC
+	present and in use. In addition to use the generic HDLC
 	you need to follow some additional plumbing rules. They may seem 
 	complex but a look at the example hostess_sv11 driver should
 	reassure you.
   </para>
   <para>
 	The network device used for each channel should be pointed to by
-	the netdevice field of each channel. The dev-&gt; priv field of the
+	the netdevice field of each channel. The hdlc-&gt; priv field of the
 	network device points to your private data - you will need to be
-	able to find your ppp device from this. In addition to use the
-	sync ppp layer the private data must start with a void * pointer
-	to the syncppp structures.
+	able to find your private data from this.
   </para>
   <para>
 	The way most drivers approach this particular problem is to
 	create a structure holding the Z8530 device definition and
-	put that and the syncppp pointer into the private field of
-	the network device. The network device fields of the channels
-	then point back to the network devices. The ppp_device can also
-	be put in the private structure conveniently.
+	put that into the private field of the network device. The
+	network device fields of the channels then point back to the
+	network devices.
   </para>
   <para>
-	If you wish to use the synchronous ppp then you need to attach
-	the syncppp layer to the network device. You should do this before
-	you register the network device. The
-	<function>sppp_attach</function> requires that the first void *
-	pointer in your private data is pointing to an empty struct
-	ppp_device. The function fills in the initial data for the
-	ppp/hdlc layer.
+	If you wish to use the generic HDLC then you need to register
+	the HDLC device.
   </para>
   <para>
 	Before you register your network device you will also need to
@@ -314,10 +300,10 @@
 	buffer in sk_buff format and queues it for transmission. The
 	caller must provide the entire packet with the exception of the
 	bitstuffing and CRC. This is normally done by the caller via
-	the syncppp interface layer. It returns 0 if the buffer has been 
-        queued and non zero values  for queue full. If the function accepts 
-	the buffer it becomes property of the Z8530 layer and the caller 
-	should not free it. 
+	the generic HDLC interface layer. It returns 0 if the buffer has been
+	queued and non zero values for queue full. If the function accepts
+	the buffer it becomes property of the Z8530 layer and the caller
+	should not free it.
   </para>
   <para>
 	The function <function>z8530_get_stats</function> returns a pointer
diff --git a/Documentation/Intel-IOMMU.txt b/Documentation/Intel-IOMMU.txt
index c2321903aa09..21bc416d887e 100644
--- a/Documentation/Intel-IOMMU.txt
+++ b/Documentation/Intel-IOMMU.txt
@@ -48,7 +48,7 @@ IOVA generation is pretty generic. We used the same technique as vmalloc()
 but these are not global address spaces, but separate for each domain.
 Different DMA engines may support different number of domains.
 
-We also allocate gaurd pages with each mapping, so we can attempt to catch
+We also allocate guard pages with each mapping, so we can attempt to catch
 any overflow that might happen.
 
 
@@ -112,4 +112,4 @@ TBD
 
 - For compatibility testing, could use unity map domain for all devices, just
   provide a 1-1 for all useful memory under a single domain for all devices.
-- API for paravirt ops for abstracting functionlity for VMM folks.
+- API for paravirt ops for abstracting functionality for VMM folks.
diff --git a/Documentation/Makefile b/Documentation/Makefile
new file mode 100644
index 000000000000..94b945733534
--- /dev/null
+++ b/Documentation/Makefile
@@ -0,0 +1,3 @@
+obj-m := DocBook/ accounting/ auxdisplay/ connector/ \
+	filesystems/configfs/ ia64/ networking/ \
+	pcmcia/ spi/ video4linux/ vm/ watchdog/src/
diff --git a/Documentation/SubmittingPatches b/Documentation/SubmittingPatches
index 118ca6e9404f..f79ad9ff6031 100644
--- a/Documentation/SubmittingPatches
+++ b/Documentation/SubmittingPatches
@@ -528,7 +528,33 @@ See more details on the proper patch format in the following
 references.
 
 
+16) Sending "git pull" requests  (from Linus emails)
 
+Please write the git repo address and branch name alone on the same line
+so that I can't even by mistake pull from the wrong branch, and so
+that a triple-click just selects the whole thing.
+
+So the proper format is something along the lines of:
+
+	"Please pull from
+
+		git://jdelvare.pck.nerim.net/jdelvare-2.6 i2c-for-linus
+
+	 to get these changes:"
+
+so that I don't have to hunt-and-peck for the address and inevitably
+get it wrong (actually, I've only gotten it wrong a few times, and
+checking against the diffstat tells me when I get it wrong, but I'm
+just a lot more comfortable when I don't have to "look for" the right
+thing to pull, and double-check that I have the right branch-name).
+
+
+Please use "git diff -M --stat --summary" to generate the diffstat:
+the -M enables rename detection, and the summary enables a summary of
+new/deleted or renamed files.
+
+With rename detection, the statistics are rather different [...]
+because git will notice that a fair number of the changes are renames.
 
 -----------------------------------
 SECTION 2 - HINTS, TIPS, AND TRICKS
diff --git a/Documentation/accounting/Makefile b/Documentation/accounting/Makefile
new file mode 100644
index 000000000000..31929eb875b1
--- /dev/null
+++ b/Documentation/accounting/Makefile
@@ -0,0 +1,10 @@
+# kbuild trick to avoid linker error. Can be omitted if a module is built.
+obj- := dummy.o
+
+# List of programs to build
+hostprogs-y := getdelays
+
+# Tell kbuild to always build the programs
+always := $(hostprogs-y)
+
+HOSTCFLAGS_getdelays.o += -I$(objtree)/usr/include
diff --git a/Documentation/accounting/delay-accounting.txt b/Documentation/accounting/delay-accounting.txt
index 1443cd71d263..8a12f0730c94 100644
--- a/Documentation/accounting/delay-accounting.txt
+++ b/Documentation/accounting/delay-accounting.txt
@@ -11,6 +11,7 @@ the delays experienced by a task while
 a) waiting for a CPU (while being runnable)
 b) completion of synchronous block I/O initiated by the task
 c) swapping in pages
+d) memory reclaim
 
 and makes these statistics available to userspace through
 the taskstats interface.
@@ -41,7 +42,7 @@ this structure. See
      include/linux/taskstats.h
 for a description of the fields pertaining to delay accounting.
 It will generally be in the form of counters returning the cumulative
-delay seen for cpu, sync block I/O, swapin etc.
+delay seen for cpu, sync block I/O, swapin, memory reclaim etc.
 
 Taking the difference of two successive readings of a given
 counter (say cpu_delay_total) for a task will give the delay
@@ -94,7 +95,9 @@ CPU	count	real total	virtual total	delay total
 	7876	92005750	100000000	24001500
 IO	count	delay total
 	0	0
-MEM	count	delay total
+SWAP	count	delay total
+	0	0
+RECLAIM	count	delay total
 	0	0
 
 Get delays seen in executing a given simple command
@@ -108,5 +111,7 @@ CPU	count	real total	virtual total	delay total
 	6	4000250		4000000		0
 IO	count	delay total
 	0	0
-MEM	count	delay total
+SWAP	count	delay total
+	0	0
+RECLAIM	count	delay total
 	0	0
diff --git a/Documentation/accounting/getdelays.c b/Documentation/accounting/getdelays.c
index 40121b5cca14..cc49400b4af8 100644
--- a/Documentation/accounting/getdelays.c
+++ b/Documentation/accounting/getdelays.c
@@ -196,14 +196,24 @@ void print_delayacct(struct taskstats *t)
 	       "      %15llu%15llu%15llu%15llu\n"
 	       "IO    %15s%15s\n"
 	       "      %15llu%15llu\n"
-	       "MEM   %15s%15s\n"
+	       "SWAP  %15s%15s\n"
+	       "      %15llu%15llu\n"
+	       "RECLAIM  %12s%15s\n"
 	       "      %15llu%15llu\n",
 	       "count", "real total", "virtual total", "delay total",
-	       t->cpu_count, t->cpu_run_real_total, t->cpu_run_virtual_total,
-	       t->cpu_delay_total,
+	       (unsigned long long)t->cpu_count,
+	       (unsigned long long)t->cpu_run_real_total,
+	       (unsigned long long)t->cpu_run_virtual_total,
+	       (unsigned long long)t->cpu_delay_total,
+	       "count", "delay total",
+	       (unsigned long long)t->blkio_count,
+	       (unsigned long long)t->blkio_delay_total,
+	       "count", "delay total",
+	       (unsigned long long)t->swapin_count,
+	       (unsigned long long)t->swapin_delay_total,
 	       "count", "delay total",
-	       t->blkio_count, t->blkio_delay_total,
-	       "count", "delay total", t->swapin_count, t->swapin_delay_total);
+	       (unsigned long long)t->freepages_count,
+	       (unsigned long long)t->freepages_delay_total);
 }
 
 void task_context_switch_counts(struct taskstats *t)
@@ -211,14 +221,17 @@ void task_context_switch_counts(struct taskstats *t)
 	printf("\n\nTask   %15s%15s\n"
 	       "       %15llu%15llu\n",
 	       "voluntary", "nonvoluntary",
-	       t->nvcsw, t->nivcsw);
+	       (unsigned long long)t->nvcsw, (unsigned long long)t->nivcsw);
 }
 
 void print_cgroupstats(struct cgroupstats *c)
 {
 	printf("sleeping %llu, blocked %llu, running %llu, stopped %llu, "
-		"uninterruptible %llu\n", c->nr_sleeping, c->nr_io_wait,
-		c->nr_running, c->nr_stopped, c->nr_uninterruptible);
+		"uninterruptible %llu\n", (unsigned long long)c->nr_sleeping,
+		(unsigned long long)c->nr_io_wait,
+		(unsigned long long)c->nr_running,
+		(unsigned long long)c->nr_stopped,
+		(unsigned long long)c->nr_uninterruptible);
 }
 
 
diff --git a/Documentation/accounting/taskstats-struct.txt b/Documentation/accounting/taskstats-struct.txt
index cd784f46bf8a..e7512c061c15 100644
--- a/Documentation/accounting/taskstats-struct.txt
+++ b/Documentation/accounting/taskstats-struct.txt
@@ -6,7 +6,7 @@ This document contains an explanation of the struct taskstats fields.
 There are three different groups of fields in the struct taskstats:
 
 1) Common and basic accounting fields
-    If CONFIG_TASKSTATS is set, the taskstats inteface is enabled and
+    If CONFIG_TASKSTATS is set, the taskstats interface is enabled and
     the common fields and basic accounting fields are collected for
     delivery at do_exit() of a task.
 2) Delay accounting fields
@@ -26,6 +26,8 @@ There are three different groups of fields in the struct taskstats:
 
 5) Time accounting for SMT machines
 
+6) Extended delay accounting fields for memory reclaim
+
 Future extension should add fields to the end of the taskstats struct, and
 should not change the relative position of each field within the struct.
 
@@ -170,4 +172,9 @@ struct taskstats {
 	__u64	ac_utimescaled;		/* utime scaled on frequency etc */
 	__u64	ac_stimescaled;		/* stime scaled on frequency etc */
 	__u64	cpu_scaled_run_real_total; /* scaled cpu_run_real_total */
+
+6) Extended delay accounting fields for memory reclaim
+	/* Delay waiting for memory reclaim */
+	__u64	freepages_count;
+	__u64	freepages_delay_total;
 }
diff --git a/Documentation/arm/IXP4xx b/Documentation/arm/IXP4xx
index 43edb4ecf27d..72fbcc4fcab0 100644
--- a/Documentation/arm/IXP4xx
+++ b/Documentation/arm/IXP4xx
@@ -32,7 +32,7 @@ Linux currently supports the following features on the IXP4xx chips:
 - Flash access (MTD/JFFS)
 - I2C through GPIO on IXP42x
 - GPIO for input/output/interrupts 
-  See include/asm-arm/arch-ixp4xx/platform.h for access functions.
+  See arch/arm/mach-ixp4xx/include/mach/platform.h for access functions.
 - Timers (watchdog, OS)
 
 The following components of the chips are not supported by Linux and
diff --git a/Documentation/arm/Interrupts b/Documentation/arm/Interrupts
index 0d3dbf1099bc..f09ab1b90ef1 100644
--- a/Documentation/arm/Interrupts
+++ b/Documentation/arm/Interrupts
@@ -138,14 +138,8 @@ So, what's changed?
 
                 Set active the IRQ edge(s)/level.  This replaces the
                 SA1111 INTPOL manipulation, and the set_GPIO_IRQ_edge()
-                function.  Type should be one of the following:
-
-                #define IRQT_NOEDGE     (0)
-                #define IRQT_RISING     (__IRQT_RISEDGE)
-                #define IRQT_FALLING    (__IRQT_FALEDGE)
-                #define IRQT_BOTHEDGE   (__IRQT_RISEDGE|__IRQT_FALEDGE)
-                #define IRQT_LOW        (__IRQT_LOWLVL)
-                #define IRQT_HIGH       (__IRQT_HIGHLVL)
+                function.  Type should be one of IRQ_TYPE_xxx defined in
+		<linux/irq.h>
 
 3. set_GPIO_IRQ_edge() is obsolete, and should be replaced by set_irq_type.
 
@@ -164,7 +158,7 @@ So, what's changed?
    be re-checked for pending events.  (see the Neponset IRQ handler for
    details).
 
-7. fixup_irq() is gone, as is include/asm-arm/arch-*/irq.h
+7. fixup_irq() is gone, as is arch/arm/mach-*/include/mach/irq.h
 
 Please note that this will not solve all problems - some of them are
 hardware based.  Mixing level-based and edge-based IRQs on the same
diff --git a/Documentation/arm/README b/Documentation/arm/README
index 9b9c8226fdc4..d98783fbe0c7 100644
--- a/Documentation/arm/README
+++ b/Documentation/arm/README
@@ -79,7 +79,7 @@ Machine/Platform support
   To this end, we now have arch/arm/mach-$(MACHINE) directories which are
   designed to house the non-driver files for a particular machine (eg, PCI,
   memory management, architecture definitions etc).  For all future
-  machines, there should be a corresponding include/asm-arm/arch-$(MACHINE)
+  machines, there should be a corresponding arch/arm/mach-$(MACHINE)/include/mach
   directory.
 
 
@@ -176,7 +176,7 @@ Kernel entry (head.S)
   class typically based around one or more system on a chip devices, and
   acts as a natural container around the actual implementations.  These
   classes are given directories - arch/arm/mach-<class> and
-  include/asm-arm/arch-<class> - which contain the source files to
+  arch/arm/mach-<class> - which contain the source files to/include/mach
   support the machine class.  This directories also contain any machine
   specific supporting code.
 
diff --git a/Documentation/arm/Samsung-S3C24XX/GPIO.txt b/Documentation/arm/Samsung-S3C24XX/GPIO.txt
index 8caea8c237ee..ea7ccfc4b274 100644
--- a/Documentation/arm/Samsung-S3C24XX/GPIO.txt
+++ b/Documentation/arm/Samsung-S3C24XX/GPIO.txt
@@ -13,16 +13,31 @@ Introduction
   data-sheet/users manual to find out the complete list.
 
 
+GPIOLIB
+-------
+
+  With the event of the GPIOLIB in drivers/gpio, support for some
+  of the GPIO functions such as reading and writing a pin will
+  be removed in favour of this common access method.
+
+  Once all the extant drivers have been converted, the functions
+  listed below will be removed (they may be marked as __deprecated
+  in the near future).
+
+  - s3c2410_gpio_getpin
+  - s3c2410_gpio_setpin
+
+
 Headers
 -------
 
-  See include/asm-arm/arch-s3c2410/regs-gpio.h for the list
+  See arch/arm/mach-s3c2410/include/mach/regs-gpio.h for the list
   of GPIO pins, and the configuration values for them. This
-  is included by using #include <asm/arch/regs-gpio.h>
+  is included by using #include <mach/regs-gpio.h>
 
   The GPIO management functions are defined in the hardware
-  header include/asm-arm/arch-s3c2410/hardware.h which can be
-  included by #include <asm/arch/hardware.h>
+  header arch/arm/mach-s3c2410/include/mach/hardware.h which can be
+  included by #include <mach/hardware.h>
 
   A useful amount of documentation can be found in the hardware
   header on how the GPIO functions (and others) work.
diff --git a/Documentation/arm/Samsung-S3C24XX/Overview.txt b/Documentation/arm/Samsung-S3C24XX/Overview.txt
index d04e1e30c47f..cff6227b4484 100644
--- a/Documentation/arm/Samsung-S3C24XX/Overview.txt
+++ b/Documentation/arm/Samsung-S3C24XX/Overview.txt
@@ -8,9 +8,10 @@ Introduction
 
   The Samsung S3C24XX range of ARM9 System-on-Chip CPUs are supported
   by the 's3c2410' architecture of ARM Linux. Currently the S3C2410,
-  S3C2412, S3C2413, S3C2440 and S3C2442 devices are supported.
+  S3C2412, S3C2413, S3C2440, S3C2442 and S3C2443 devices are supported.
+
+  Support for the S3C2400 and S3C24A0 series are in progress.
 
-  Support for the S3C2400 series is in progress.
 
 Configuration
 -------------
@@ -36,7 +37,23 @@ Layout
   in arch/arm/mach-s3c2410 and S3C2440 in arch/arm/mach-s3c2440
 
   Register, kernel and platform data definitions are held in the
-  include/asm-arm/arch-s3c2410 directory.
+  arch/arm/mach-s3c2410 directory./include/mach
+
+arch/arm/plat-s3c24xx:
+
+  Files in here are either common to all the s3c24xx family,
+  or are common to only some of them with names to indicate this
+  status. The files that are not common to all are generally named
+  with the initial cpu they support in the series to ensure a short
+  name without any possibility of confusion with newer devices.
+
+  As an example, initially s3c244x would cover s3c2440 and s3c2442, but
+  with the s3c2443 which does not share many of the same drivers in
+  this directory, the name becomes invalid. We stick to s3c2440-<x>
+  to indicate a driver that is s3c2440 and s3c2442 compatible.
+
+  This does mean that to find the status of any given SoC, a number
+  of directories may need to be searched.
 
 
 Machines
@@ -159,6 +176,17 @@ NAND
   For more information see Documentation/arm/Samsung-S3C24XX/NAND.txt
 
 
+SD/MMC
+------
+
+  The SD/MMC hardware pre S3C2443 is supported in the current
+  kernel, the driver is drivers/mmc/host/s3cmci.c and supports
+  1 and 4 bit SD or MMC cards.
+
+  The SDIO behaviour of this driver has not been fully tested. There is no
+  current support for hardware SDIO interrupts.
+
+
 Serial
 ------
 
@@ -178,6 +206,9 @@ GPIO
   The core contains support for manipulating the GPIO, see the
   documentation in GPIO.txt in the same directory as this file.
 
+  Newer kernels carry GPIOLIB, and support is being moved towards
+  this with some of the older support in line to be removed.
+
 
 Clock Management
 ----------------
diff --git a/Documentation/arm/Samsung-S3C24XX/USB-Host.txt b/Documentation/arm/Samsung-S3C24XX/USB-Host.txt
index b93b68e2b143..67671eba4231 100644
--- a/Documentation/arm/Samsung-S3C24XX/USB-Host.txt
+++ b/Documentation/arm/Samsung-S3C24XX/USB-Host.txt
@@ -49,7 +49,7 @@ Board Support
 Platform Data
 -------------
 
-  See linux/include/asm-arm/arch-s3c2410/usb-control.h for the
+  See arch/arm/mach-s3c2410/include/mach/usb-control.h for the
   descriptions of the platform device data. An implementation
   can be found in linux/arch/arm/mach-s3c2410/usb-simtec.c .
 
diff --git a/Documentation/auxdisplay/Makefile b/Documentation/auxdisplay/Makefile
new file mode 100644
index 000000000000..51fe23332c81
--- /dev/null
+++ b/Documentation/auxdisplay/Makefile
@@ -0,0 +1,10 @@
+# kbuild trick to avoid linker error. Can be omitted if a module is built.
+obj- := dummy.o
+
+# List of programs to build
+hostprogs-y := cfag12864b-example
+
+# Tell kbuild to always build the programs
+always := $(hostprogs-y)
+
+HOSTCFLAGS_cfag12864b-example.o += -I$(objtree)/usr/include
diff --git a/Documentation/bt8xxgpio.txt b/Documentation/bt8xxgpio.txt
new file mode 100644
index 000000000000..d8297e4ebd26
--- /dev/null
+++ b/Documentation/bt8xxgpio.txt
@@ -0,0 +1,67 @@
+===============================================================
+==  BT8XXGPIO driver                                         ==
+==                                                           ==
+==  A driver for a selfmade cheap BT8xx based PCI GPIO-card  ==
+==                                                           ==
+==  For advanced documentation, see                          ==
+==  http://www.bu3sch.de/btgpio.php                          ==
+===============================================================
+
+
+A generic digital 24-port PCI GPIO card can be built out of an ordinary
+Brooktree bt848, bt849, bt878 or bt879 based analog TV tuner card. The
+Brooktree chip is used in old analog Hauppauge WinTV PCI cards. You can easily
+find them used for low prices on the net.
+
+The bt8xx chip does have 24 digital GPIO ports.
+These ports are accessible via 24 pins on the SMD chip package.
+
+
+==============================================
+==  How to physically access the GPIO pins  ==
+==============================================
+
+The are several ways to access these pins. One might unsolder the whole chip
+and put it on a custom PCI board, or one might only unsolder each individual
+GPIO pin and solder that to some tiny wire. As the chip package really is tiny
+there are some advanced soldering skills needed in any case.
+
+The physical pinouts are drawn in the following ASCII art.
+The GPIO pins are marked with G00-G23
+
+                                           G G G G G G G G G G G G     G G G G G G
+                                           0 0 0 0 0 0 0 0 0 0 1 1     1 1 1 1 1 1
+                                           0 1 2 3 4 5 6 7 8 9 0 1     2 3 4 5 6 7
+           | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | |
+           ---------------------------------------------------------------------------
+         --|                               ^                                     ^   |--
+         --|                               pin 86                           pin 67   |--
+         --|                                                                         |--
+         --|                                                               pin 61 >  |-- G18
+         --|                                                                         |-- G19
+         --|                                                                         |-- G20
+         --|                                                                         |-- G21
+         --|                                                                         |-- G22
+         --|                                                               pin 56 >  |-- G23
+         --|                                                                         |--
+         --|                           Brooktree 878/879                             |--
+         --|                                                                         |--
+         --|                                                                         |--
+         --|                                                                         |--
+         --|                                                                         |--
+         --|                                                                         |--
+         --|                                                                         |--
+         --|                                                                         |--
+         --|                                                                         |--
+         --|                                                                         |--
+         --|                                                                         |--
+         --|                                                                         |--
+         --|                                                                         |--
+         --|                                                                         |--
+         --|   O                                                                     |--
+         --|                                                                         |--
+           ---------------------------------------------------------------------------
+           | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | |
+           ^
+           This is pin 1
+
diff --git a/Documentation/cciss.txt b/Documentation/cciss.txt
index 63e59b8847c5..8244c6442faa 100644
--- a/Documentation/cciss.txt
+++ b/Documentation/cciss.txt
@@ -112,27 +112,18 @@ Hot plug support for SCSI tape drives
 
 Hot plugging of SCSI tape drives is supported, with some caveats.
 The cciss driver must be informed that changes to the SCSI bus
-have been made, in addition to and prior to informing the SCSI 
-mid layer.  This may be done via the /proc filesystem.  For example:
+have been made.  This may be done via the /proc filesystem.
+For example:
 
 	echo "rescan" > /proc/scsi/cciss0/1
 
-This causes the adapter to query the adapter about changes to the 
-physical SCSI buses and/or fibre channel arbitrated loop and the 
+This causes the driver to query the adapter about changes to the
+physical SCSI buses and/or fibre channel arbitrated loop and the
 driver to make note of any new or removed sequential access devices
 or medium changers.  The driver will output messages indicating what 
 devices have been added or removed and the controller, bus, target and 
-lun used to address the device.  Once this is done, the SCSI mid layer 
-can be informed of changes to the virtual SCSI bus which the driver 
-presents to it in the usual way. For example: 
-
-	echo scsi add-single-device 3 2 1 0 > /proc/scsi/scsi
- 
-to add a device on controller 3, bus 2, target 1, lun 0.   Note that
-the driver makes an effort to preserve the devices positions
-in the virtual SCSI bus, so if you are only moving tape drives 
-around on the same adapter and not adding or removing tape drives 
-from the adapter, informing the SCSI mid layer may not be necessary.
+lun used to address the device.  It then notifies the SCSI mid layer
+of these changes.
 
 Note that the naming convention of the /proc filesystem entries 
 contains a number in addition to the driver name.  (E.g. "cciss0" 
diff --git a/Documentation/cli-sti-removal.txt b/Documentation/cli-sti-removal.txt
deleted file mode 100644
index 60932b02fcb3..000000000000
--- a/Documentation/cli-sti-removal.txt
+++ /dev/null
@@ -1,133 +0,0 @@
-
-#### cli()/sti() removal guide, started by Ingo Molnar <mingo@redhat.com>
-
-
-as of 2.5.28, five popular macros have been removed on SMP, and
-are being phased out on UP:
-
- cli(), sti(), save_flags(flags), save_flags_cli(flags), restore_flags(flags)
-
-until now it was possible to protect driver code against interrupt
-handlers via a cli(), but from now on other, more lightweight methods
-have to be used for synchronization, such as spinlocks or semaphores.
-
-for example, driver code that used to do something like:
-
-	struct driver_data;
-
-	irq_handler (...)
-	{
-		....
-		driver_data.finish = 1;
-		driver_data.new_work = 0;
-		....
-	}
-
-	...
-
-	ioctl_func (...)
-	{
-		...
-		cli();
-		...
-		driver_data.finish = 0;
-		driver_data.new_work = 2;
-		...
-		sti();
-		...
-	}
-
-was SMP-correct because the cli() function ensured that no
-interrupt handler (amongst them the above irq_handler()) function
-would execute while the cli()-ed section is executing.
-
-but from now on a more direct method of locking has to be used:
-
-	DEFINE_SPINLOCK(driver_lock);
-	struct driver_data;
-
-	irq_handler (...)
-	{
-		unsigned long flags;
-		....
-		spin_lock_irqsave(&driver_lock, flags);
-		....
-		driver_data.finish = 1;
-		driver_data.new_work = 0;
-		....
-		spin_unlock_irqrestore(&driver_lock, flags);
-		....
-	}
-
-	...
-
-	ioctl_func (...)
-	{
-		...
-		spin_lock_irq(&driver_lock);
-		...
-		driver_data.finish = 0;
-		driver_data.new_work = 2;
-		...
-		spin_unlock_irq(&driver_lock);
-		...
-	}
-
-the above code has a number of advantages:
-
-- the locking relation is easier to understand - actual lock usage
-  pinpoints the critical sections. cli() usage is too opaque.
-  Easier to understand means it's easier to debug.
-
-- it's faster, because spinlocks are faster to acquire than the
-  potentially heavily-used IRQ lock. Furthermore, your driver does
-  not have to wait eg. for a big heavy SCSI interrupt to finish,
-  because the driver_lock spinlock is only used by your driver.
-  cli() on the other hand was used by many drivers, and extended
-  the critical section to the whole IRQ handler function - creating
-  serious lock contention.
-
- 
-to make the transition easier, we've still kept the cli(), sti(),
-save_flags(), save_flags_cli() and restore_flags() macros defined
-on UP systems - but their usage will be phased out until 2.6 is
-released.
-
-drivers that want to disable local interrupts (interrupts on the
-current CPU), can use the following five macros:
-
-  local_irq_disable(), local_irq_enable(), local_save_flags(flags),
-  local_irq_save(flags), local_irq_restore(flags)
-
-but beware, their meaning and semantics are much simpler, far from
-that of the old cli(), sti(), save_flags(flags) and restore_flags(flags)
-SMP meaning:
-
-    local_irq_disable()       => turn local IRQs off
-
-    local_irq_enable()        => turn local IRQs on
-
-    local_save_flags(flags)   => save the current IRQ state into flags. The
-                                 state can be on or off. (on some
-                                 architectures there's even more bits in it.)
-
-    local_irq_save(flags)     => save the current IRQ state into flags and
-                                 disable interrupts.
-
-    local_irq_restore(flags)  => restore the IRQ state from flags.
-
-(local_irq_save can save both irqs on and irqs off state, and
-local_irq_restore can restore into both irqs on and irqs off state.)
-
-another related change is that synchronize_irq() now takes a parameter:
-synchronize_irq(irq). This change too has the purpose of making SMP
-synchronization more lightweight - this way you can wait for your own
-interrupt handler to finish, no need to wait for other IRQ sources.
-
-
-why were these changes done? The main reason was the architectural burden
-of maintaining the cli()/sti() interface - it became a real problem. The
-new interrupt system is much more streamlined, easier to understand, debug,
-and it's also a bit faster - the same happened to it that will happen to
-cli()/sti() using drivers once they convert to spinlocks :-)
-
diff --git a/Documentation/connector/Makefile b/Documentation/connector/Makefile
new file mode 100644
index 000000000000..8df1a7285a06
--- /dev/null
+++ b/Documentation/connector/Makefile
@@ -0,0 +1,11 @@
+ifneq ($(CONFIG_CONNECTOR),)
+obj-m += cn_test.o
+endif
+
+# List of programs to build
+hostprogs-y := ucon
+
+# Tell kbuild to always build the programs
+always := $(hostprogs-y)
+
+HOSTCFLAGS_ucon.o += -I$(objtree)/usr/include
diff --git a/Documentation/controllers/memory.txt b/Documentation/controllers/memory.txt
index 866b9cd9a959..9b53d5827361 100644
--- a/Documentation/controllers/memory.txt
+++ b/Documentation/controllers/memory.txt
@@ -242,8 +242,7 @@ rmdir() if there are no tasks.
 1. Add support for accounting huge pages (as a separate controller)
 2. Make per-cgroup scanner reclaim not-shared pages first
 3. Teach controller to account for shared-pages
-4. Start reclamation when the limit is lowered
-5. Start reclamation in the background when the limit is
+4. Start reclamation in the background when the limit is
    not yet hit but the usage is getting closer
 
 Summary
diff --git a/Documentation/cpu-freq/governors.txt b/Documentation/cpu-freq/governors.txt
index dcec0564d040..5b0cfa67aff9 100644
--- a/Documentation/cpu-freq/governors.txt
+++ b/Documentation/cpu-freq/governors.txt
@@ -122,7 +122,7 @@ around '10000' or more.
 show_sampling_rate_(min|max): the minimum and maximum sampling rates
 available that you may set 'sampling_rate' to.
 
-up_threshold: defines what the average CPU usaged between the samplings
+up_threshold: defines what the average CPU usage between the samplings
 of 'sampling_rate' needs to be for the kernel to make a decision on
 whether it should increase the frequency.  For example when it is set
 to its default value of '80' it means that between the checking
diff --git a/Documentation/cpu-hotplug.txt b/Documentation/cpu-hotplug.txt
index ba0aacde94fb..94bbc27ddd4f 100644
--- a/Documentation/cpu-hotplug.txt
+++ b/Documentation/cpu-hotplug.txt
@@ -59,15 +59,10 @@ apicid values in those tables for disabled apics. In the event BIOS doesn't
 mark such hot-pluggable cpus as disabled entries, one could use this
 parameter "additional_cpus=x" to represent those cpus in the cpu_possible_map.
 
-s390 uses the number of cpus it detects at IPL time to also the number of bits
-in cpu_possible_map. If it is desired to add additional cpus at a later time
-the number should be specified using this option or the possible_cpus option.
-
 possible_cpus=n		[s390 only] use this to set hotpluggable cpus.
 			This option sets possible_cpus bits in
 			cpu_possible_map. Thus keeping the numbers of bits set
 			constant even if the machine gets rebooted.
-			This option overrides additional_cpus.
 
 CPU maps and such
 -----------------
diff --git a/Documentation/devices.txt b/Documentation/devices.txt
index e6244cde26e9..05c80645e4ee 100644
--- a/Documentation/devices.txt
+++ b/Documentation/devices.txt
@@ -2560,9 +2560,6 @@ Your cooperation is appreciated.
 		 96 = /dev/usb/hiddev0	1st USB HID device
 		    ...
 		111 = /dev/usb/hiddev15	16th USB HID device
-		112 = /dev/usb/auer0	1st auerswald ISDN device
-		    ...
-		127 = /dev/usb/auer15	16th auerswald ISDN device
 		128 = /dev/usb/brlvgr0	First Braille Voyager device
 		    ...
 		131 = /dev/usb/brlvgr3	Fourth Braille Voyager device
diff --git a/Documentation/dontdiff b/Documentation/dontdiff
index 881e6dd03aea..27809357da58 100644
--- a/Documentation/dontdiff
+++ b/Documentation/dontdiff
@@ -5,6 +5,8 @@
 *.css
 *.dvi
 *.eps
+*.fw.gen.S
+*.fw
 *.gif
 *.grep
 *.grp
diff --git a/Documentation/edac.txt b/Documentation/edac.txt
index a5c36842ecef..8eda3fb66416 100644
--- a/Documentation/edac.txt
+++ b/Documentation/edac.txt
@@ -222,74 +222,9 @@ both csrow2 and csrow3 are populated, this indicates a dual ranked
 set of DIMMs for channels 0 and 1.
 
 
-Within each of the 'mc','mcX' and 'csrowX' directories are several
+Within each of the 'mcX' and 'csrowX' directories are several
 EDAC control and attribute files.
 
-
-============================================================================
-DIRECTORY 'mc'
-
-In directory 'mc' are EDAC system overall control and attribute files:
-
-
-Panic on UE control file:
-
-	'edac_mc_panic_on_ue'
-
-	An uncorrectable error will cause a machine panic.  This is usually
-	desirable.  It is a bad idea to continue when an uncorrectable error
-	occurs - it is indeterminate what was uncorrected and the operating
-	system context might be so mangled that continuing will lead to further
-	corruption. If the kernel has MCE configured, then EDAC will never
-	notice the UE.
-
-	LOAD TIME: module/kernel parameter: panic_on_ue=[0|1]
-
-	RUN TIME:  echo "1" >/sys/devices/system/edac/mc/edac_mc_panic_on_ue
-
-
-Log UE control file:
-
-	'edac_mc_log_ue'
-
-	Generate kernel messages describing uncorrectable errors.  These errors
-	are reported through the system message log system.  UE statistics
-	will be accumulated even when UE logging is disabled.
-
-	LOAD TIME: module/kernel parameter: log_ue=[0|1]
-
-	RUN TIME: echo "1" >/sys/devices/system/edac/mc/edac_mc_log_ue
-
-
-Log CE control file:
-
-	'edac_mc_log_ce'
-
-	Generate kernel messages describing correctable errors.  These
-	errors are reported through the system message log system.
-	CE statistics will be accumulated even when CE logging is disabled.
-
-	LOAD TIME: module/kernel parameter: log_ce=[0|1]
-
-	RUN TIME: echo "1" >/sys/devices/system/edac/mc/edac_mc_log_ce
-
-
-Polling period control file:
-
-	'edac_mc_poll_msec'
-
-	The time period, in milliseconds, for polling for error information.
-	Too small a value wastes resources.  Too large a value might delay
-	necessary handling of errors and might loose valuable information for
-	locating the error.  1000 milliseconds (once each second) is the current
-	default. Systems which require all the bandwidth they can get, may
-	increase this.
-
-	LOAD TIME: module/kernel parameter: poll_msec=[0|1]
-
-	RUN TIME: echo "1000" >/sys/devices/system/edac/mc/edac_mc_poll_msec
-
-
 ============================================================================
 'mcX' DIRECTORIES
 
@@ -392,7 +327,7 @@ Sdram memory scrubbing rate:
 	'sdram_scrub_rate'
 
 	Read/Write attribute file that controls memory scrubbing. The scrubbing
-	rate is set by writing a minimum bandwith in bytes/sec to the attribute
+	rate is set by writing a minimum bandwidth in bytes/sec to the attribute
 	file. The rate will be translated to an internal value that gives at
 	least the specified rate.
 
@@ -537,7 +472,6 @@ Channel 1 DIMM Label control file:
 	motherboard specific and determination of this information
 	must occur in userland at this time.
 
-
 ============================================================================
 SYSTEM LOGGING
 
@@ -570,7 +504,6 @@ error type, a notice of "no info" and then an optional,
 driver-specific error message.
 
 
-
 ============================================================================
 PCI Bus Parity Detection
 
@@ -604,6 +537,74 @@ Enable/Disable PCI Parity checking control file:
 	echo "0" >/sys/devices/system/edac/pci/check_pci_parity
 
 
+Parity Count:
+
+	'pci_parity_count'
+
+	This attribute file will display the number of parity errors that
+	have been detected.
+
+
+============================================================================
+MODULE PARAMETERS
+
+Panic on UE control file:
+
+	'edac_mc_panic_on_ue'
+
+	An uncorrectable error will cause a machine panic.  This is usually
+	desirable.  It is a bad idea to continue when an uncorrectable error
+	occurs - it is indeterminate what was uncorrected and the operating
+	system context might be so mangled that continuing will lead to further
+	corruption. If the kernel has MCE configured, then EDAC will never
+	notice the UE.
+
+	LOAD TIME: module/kernel parameter: edac_mc_panic_on_ue=[0|1]
+
+	RUN TIME:  echo "1" > /sys/module/edac_core/parameters/edac_mc_panic_on_ue
+
+
+Log UE control file:
+
+	'edac_mc_log_ue'
+
+	Generate kernel messages describing uncorrectable errors.  These errors
+	are reported through the system message log system.  UE statistics
+	will be accumulated even when UE logging is disabled.
+
+	LOAD TIME: module/kernel parameter: edac_mc_log_ue=[0|1]
+
+	RUN TIME: echo "1" > /sys/module/edac_core/parameters/edac_mc_log_ue
+
+
+Log CE control file:
+
+	'edac_mc_log_ce'
+
+	Generate kernel messages describing correctable errors.  These
+	errors are reported through the system message log system.
+	CE statistics will be accumulated even when CE logging is disabled.
+
+	LOAD TIME: module/kernel parameter: edac_mc_log_ce=[0|1]
+
+	RUN TIME: echo "1" > /sys/module/edac_core/parameters/edac_mc_log_ce
+
+
+Polling period control file:
+
+	'edac_mc_poll_msec'
+
+	The time period, in milliseconds, for polling for error information.
+	Too small a value wastes resources.  Too large a value might delay
+	necessary handling of errors and might loose valuable information for
+	locating the error.  1000 milliseconds (once each second) is the current
+	default. Systems which require all the bandwidth they can get, may
+	increase this.
+
+	LOAD TIME: module/kernel parameter: edac_mc_poll_msec=[0|1]
+
+	RUN TIME: echo "1000" > /sys/module/edac_core/parameters/edac_mc_poll_msec
+
 
 Panic on PCI PARITY Error:
 
@@ -614,21 +615,13 @@ Panic on PCI PARITY Error:
 	error has been detected.
 
 
-	module/kernel parameter: panic_on_pci_parity=[0|1]
+	module/kernel parameter: edac_panic_on_pci_pe=[0|1]
 
 	Enable:
-	echo "1" >/sys/devices/system/edac/pci/panic_on_pci_parity
+	echo "1" > /sys/module/edac_core/parameters/edac_panic_on_pci_pe
 
 	Disable:
-	echo "0" >/sys/devices/system/edac/pci/panic_on_pci_parity
-
-
-Parity Count:
-
-	'pci_parity_count'
-
-	This attribute file will display the number of parity errors that
-	have been detected.
+	echo "0" > /sys/module/edac_core/parameters/edac_panic_on_pci_pe
 
 
 
diff --git a/Documentation/feature-removal-schedule.txt b/Documentation/feature-removal-schedule.txt
index 09c4a1efb8e3..eb1a47b97427 100644
--- a/Documentation/feature-removal-schedule.txt
+++ b/Documentation/feature-removal-schedule.txt
@@ -19,15 +19,6 @@ Who:	Pavel Machek <pavel@suse.cz>
 
 ---------------------------
 
-What:	old NCR53C9x driver
-When:	October 2007
-Why:	Replaced by the much better esp_scsi driver.  Actual low-level
-	driver can be ported over almost trivially.
-Who:	David Miller <davem@davemloft.net>
-	Christoph Hellwig <hch@lst.de>
-
----------------------------
-
 What:	Video4Linux API 1 ioctls and video_decoder.h from Video devices.
 When:	December 2008
 Files:	include/linux/video_decoder.h include/linux/videodev.h
@@ -47,6 +38,30 @@ Who:	Mauro Carvalho Chehab <mchehab@infradead.org>
 
 ---------------------------
 
+What:	old tuner-3036 i2c driver
+When:	2.6.28
+Why:	This driver is for VERY old i2c-over-parallel port teletext receiver
+	boxes. Rather then spending effort on converting this driver to V4L2,
+	and since it is extremely unlikely that anyone still uses one of these
+	devices, it was decided to drop it.
+Who:	Hans Verkuil <hverkuil@xs4all.nl>
+	Mauro Carvalho Chehab <mchehab@infradead.org>
+
+ ---------------------------
+
+What:   V4L2 dpc7146 driver
+When:   2.6.28
+Why:    Old driver for the dpc7146 demonstration board that is no longer
+	relevant. The last time this was tested on actual hardware was
+	probably around 2002. Since this is a driver for a demonstration
+	board the decision was made to remove it rather than spending a
+	lot of effort continually updating this driver to stay in sync
+	with the latest internal V4L2 or I2C API.
+Who:    Hans Verkuil <hverkuil@xs4all.nl>
+	Mauro Carvalho Chehab <mchehab@infradead.org>
+
+---------------------------
+
 What:	PCMCIA control ioctl (needed for pcmcia-cs [cardmgr, cardctl])
 When:	November 2005
 Files:	drivers/pcmcia/: pcmcia_ioctl.c
@@ -138,24 +153,6 @@ Who:	Kay Sievers <kay.sievers@suse.de>
 
 ---------------------------
 
-What:	find_task_by_pid
-When:	2.6.26
-Why:	With pid namespaces, calling this funciton will return the
-	wrong task when called from inside a namespace.
-
-	The best way to save a task pid and find a task by this
-	pid later, is to find this task's struct pid pointer (or get
-	it directly from the task) and call pid_task() later.
-
-	If someone really needs to get a task by its pid_t, then
-	he most likely needs the find_task_by_vpid() to get the
-	task from the same namespace as the current task is in, but
-	this may be not so in general.
-
-Who:	Pavel Emelyanov <xemul@openvz.org>
-
----------------------------
-
 What:	ACPI procfs interface
 When:	July 2008
 Why:	ACPI sysfs conversion should be finished by January 2008.
@@ -199,19 +196,6 @@ Who:  Tejun Heo <htejun@gmail.com>
 
 ---------------------------
 
-What: The arch/ppc and include/asm-ppc directories
-When: Jun 2008
-Why:  The arch/powerpc tree is the merged architecture for ppc32 and ppc64
-      platforms.  Currently there are efforts underway to port the remaining
-      arch/ppc platforms to the merged tree.  New submissions to the arch/ppc
-      tree have been frozen with the 2.6.22 kernel release and that tree will
-      remain in bug-fix only mode until its scheduled removal.  Platforms
-      that are not ported by June 2008 will be removed due to the lack of an
-      interested maintainer.
-Who:  linuxppc-dev@ozlabs.org
-
----------------------------
-
 What:	i386/x86_64 bzImage symlinks
 When:	April 2010
 
diff --git a/Documentation/filesystems/configfs/Makefile b/Documentation/filesystems/configfs/Makefile
new file mode 100644
index 000000000000..be7ec5e67dbc
--- /dev/null
+++ b/Documentation/filesystems/configfs/Makefile
@@ -0,0 +1,3 @@
+ifneq ($(CONFIG_CONFIGFS_FS),)
+obj-m += configfs_example_explicit.o configfs_example_macros.o
+endif
diff --git a/Documentation/filesystems/configfs/configfs.txt b/Documentation/filesystems/configfs/configfs.txt
index 44c97e6accb2..fabcb0e00f25 100644
--- a/Documentation/filesystems/configfs/configfs.txt
+++ b/Documentation/filesystems/configfs/configfs.txt
@@ -311,9 +311,20 @@ the subsystem must be ready for it.
 [An Example]
 
 The best example of these basic concepts is the simple_children
-subsystem/group and the simple_child item in configfs_example.c  It
-shows a trivial object displaying and storing an attribute, and a simple
-group creating and destroying these children.
+subsystem/group and the simple_child item in configfs_example_explicit.c
+and configfs_example_macros.c.  It shows a trivial object displaying and
+storing an attribute, and a simple group creating and destroying these
+children.
+
+The only difference between configfs_example_explicit.c and
+configfs_example_macros.c is how the attributes of the childless item
+are defined.  The childless item has extended attributes, each with
+their own show()/store() operation.  This follows a convention commonly
+used in sysfs.  configfs_example_explicit.c creates these attributes
+by explicitly defining the structures involved.  Conversely
+configfs_example_macros.c uses some convenience macros from configfs.h
+to define the attributes.  These macros are similar to their sysfs
+counterparts.
 
 [Hierarchy Navigation and the Subsystem Mutex]
 
diff --git a/Documentation/filesystems/configfs/configfs_example.c b/Documentation/filesystems/configfs/configfs_example.c
deleted file mode 100644
index 039648791701..000000000000
--- a/Documentation/filesystems/configfs/configfs_example.c
+++ /dev/null
@@ -1,485 +0,0 @@
-/*
- * vim: noexpandtab ts=8 sts=0 sw=8:
- *
- * configfs_example.c - This file is a demonstration module containing
- *      a number of configfs subsystems.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public
- * License as published by the Free Software Foundation; either
- * version 2 of the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public
- * License along with this program; if not, write to the
- * Free Software Foundation, Inc., 59 Temple Place - Suite 330,
- * Boston, MA 021110-1307, USA.
- *
- * Based on sysfs:
- * 	sysfs is Copyright (C) 2001, 2002, 2003 Patrick Mochel
- *
- * configfs Copyright (C) 2005 Oracle.  All rights reserved.
- */
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/slab.h>
-
-#include <linux/configfs.h>
-
-
-
-/*
- * 01-childless
- *
- * This first example is a childless subsystem.  It cannot create
- * any config_items.  It just has attributes.
- *
- * Note that we are enclosing the configfs_subsystem inside a container.
- * This is not necessary if a subsystem has no attributes directly
- * on the subsystem.  See the next example, 02-simple-children, for
- * such a subsystem.
- */
-
-struct childless {
-	struct configfs_subsystem subsys;
-	int showme;
-	int storeme;
-};
-
-struct childless_attribute {
-	struct configfs_attribute attr;
-	ssize_t (*show)(struct childless *, char *);
-	ssize_t (*store)(struct childless *, const char *, size_t);
-};
-
-static inline struct childless *to_childless(struct config_item *item)
-{
-	return item ? container_of(to_configfs_subsystem(to_config_group(item)), struct childless, subsys) : NULL;
-}
-
-static ssize_t childless_showme_read(struct childless *childless,
-				     char *page)
-{
-	ssize_t pos;
-
-	pos = sprintf(page, "%d\n", childless->showme);
-	childless->showme++;
-
-	return pos;
-}
-
-static ssize_t childless_storeme_read(struct childless *childless,
-				      char *page)
-{
-	return sprintf(page, "%d\n", childless->storeme);
-}
-
-static ssize_t childless_storeme_write(struct childless *childless,
-				       const char *page,
-				       size_t count)
-{
-	unsigned long tmp;
-	char *p = (char *) page;
-
-	tmp = simple_strtoul(p, &p, 10);
-	if (!p || (*p && (*p != '\n')))
-		return -EINVAL;
-
-	if (tmp > INT_MAX)
-		return -ERANGE;
-
-	childless->storeme = tmp;
-
-	return count;
-}
-
-static ssize_t childless_description_read(struct childless *childless,
-					  char *page)
-{
-	return sprintf(page,
-"[01-childless]\n"
-"\n"
-"The childless subsystem is the simplest possible subsystem in\n"
-"configfs.  It does not support the creation of child config_items.\n"
-"It only has a few attributes.  In fact, it isn't much different\n"
-"than a directory in /proc.\n");
-}
-
-static struct childless_attribute childless_attr_showme = {
-	.attr	= { .ca_owner = THIS_MODULE, .ca_name = "showme", .ca_mode = S_IRUGO },
-	.show	= childless_showme_read,
-};
-static struct childless_attribute childless_attr_storeme = {
-	.attr	= { .ca_owner = THIS_MODULE, .ca_name = "storeme", .ca_mode = S_IRUGO | S_IWUSR },
-	.show	= childless_storeme_read,
-	.store	= childless_storeme_write,
-};
-static struct childless_attribute childless_attr_description = {
-	.attr = { .ca_owner = THIS_MODULE, .ca_name = "description", .ca_mode = S_IRUGO },
-	.show = childless_description_read,
-};
-
-static struct configfs_attribute *childless_attrs[] = {
-	&childless_attr_showme.attr,
-	&childless_attr_storeme.attr,
-	&childless_attr_description.attr,
-	NULL,
-};
-
-static ssize_t childless_attr_show(struct config_item *item,
-				   struct configfs_attribute *attr,
-				   char *page)
-{
-	struct childless *childless = to_childless(item);
-	struct childless_attribute *childless_attr =
-		container_of(attr, struct childless_attribute, attr);
-	ssize_t ret = 0;
-
-	if (childless_attr->show)
-		ret = childless_attr->show(childless, page);
-	return ret;
-}
-
-static ssize_t childless_attr_store(struct config_item *item,
-				    struct configfs_attribute *attr,
-				    const char *page, size_t count)
-{
-	struct childless *childless = to_childless(item);
-	struct childless_attribute *childless_attr =
-		container_of(attr, struct childless_attribute, attr);
-	ssize_t ret = -EINVAL;
-
-	if (childless_attr->store)
-		ret = childless_attr->store(childless, page, count);
-	return ret;
-}
-
-static struct configfs_item_operations childless_item_ops = {
-	.show_attribute		= childless_attr_show,
-	.store_attribute	= childless_attr_store,
-};
-
-static struct config_item_type childless_type = {
-	.ct_item_ops	= &childless_item_ops,
-	.ct_attrs	= childless_attrs,
-	.ct_owner	= THIS_MODULE,
-};
-
-static struct childless childless_subsys = {
-	.subsys = {
-		.su_group = {
-			.cg_item = {
-				.ci_namebuf = "01-childless",
-				.ci_type = &childless_type,
-			},
-		},
-	},
-};
-
-
-/* ----------------------------------------------------------------- */
-
-/*
- * 02-simple-children
- *
- * This example merely has a simple one-attribute child.  Note that
- * there is no extra attribute structure, as the child's attribute is
- * known from the get-go.  Also, there is no container for the
- * subsystem, as it has no attributes of its own.
- */
-
-struct simple_child {
-	struct config_item item;
-	int storeme;
-};
-
-static inline struct simple_child *to_simple_child(struct config_item *item)
-{
-	return item ? container_of(item, struct simple_child, item) : NULL;
-}
-
-static struct configfs_attribute simple_child_attr_storeme = {
-	.ca_owner = THIS_MODULE,
-	.ca_name = "storeme",
-	.ca_mode = S_IRUGO | S_IWUSR,
-};
-
-static struct configfs_attribute *simple_child_attrs[] = {
-	&simple_child_attr_storeme,
-	NULL,
-};
-
-static ssize_t simple_child_attr_show(struct config_item *item,
-				      struct configfs_attribute *attr,
-				      char *page)
-{
-	ssize_t count;
-	struct simple_child *simple_child = to_simple_child(item);
-
-	count = sprintf(page, "%d\n", simple_child->storeme);
-
-	return count;
-}
-
-static ssize_t simple_child_attr_store(struct config_item *item,
-				       struct configfs_attribute *attr,
-				       const char *page, size_t count)
-{
-	struct simple_child *simple_child = to_simple_child(item);
-	unsigned long tmp;
-	char *p = (char *) page;
-
-	tmp = simple_strtoul(p, &p, 10);
-	if (!p || (*p && (*p != '\n')))
-		return -EINVAL;
-
-	if (tmp > INT_MAX)
-		return -ERANGE;
-
-	simple_child->storeme = tmp;
-
-	return count;
-}
-
-static void simple_child_release(struct config_item *item)
-{
-	kfree(to_simple_child(item));
-}
-
-static struct configfs_item_operations simple_child_item_ops = {
-	.release		= simple_child_release,
-	.show_attribute		= simple_child_attr_show,
-	.store_attribute	= simple_child_attr_store,
-};
-
-static struct config_item_type simple_child_type = {
-	.ct_item_ops	= &simple_child_item_ops,
-	.ct_attrs	= simple_child_attrs,
-	.ct_owner	= THIS_MODULE,
-};
-
-
-struct simple_children {
-	struct config_group group;
-};
-
-static inline struct simple_children *to_simple_children(struct config_item *item)
-{
-	return item ? container_of(to_config_group(item), struct simple_children, group) : NULL;
-}
-
-static struct config_item *simple_children_make_item(struct config_group *group, const char *name)
-{
-	struct simple_child *simple_child;
-
-	simple_child = kzalloc(sizeof(struct simple_child), GFP_KERNEL);
-	if (!simple_child)
-		return ERR_PTR(-ENOMEM);
-
-
-	config_item_init_type_name(&simple_child->item, name,
-				   &simple_child_type);
-
-	simple_child->storeme = 0;
-
-	return &simple_child->item;
-}
-
-static struct configfs_attribute simple_children_attr_description = {
-	.ca_owner = THIS_MODULE,
-	.ca_name = "description",
-	.ca_mode = S_IRUGO,
-};
-
-static struct configfs_attribute *simple_children_attrs[] = {
-	&simple_children_attr_description,
-	NULL,
-};
-
-static ssize_t simple_children_attr_show(struct config_item *item,
-			   		 struct configfs_attribute *attr,
-			   		 char *page)
-{
-	return sprintf(page,
-"[02-simple-children]\n"
-"\n"
-"This subsystem allows the creation of child config_items.  These\n"
-"items have only one attribute that is readable and writeable.\n");
-}
-
-static void simple_children_release(struct config_item *item)
-{
-	kfree(to_simple_children(item));
-}
-
-static struct configfs_item_operations simple_children_item_ops = {
-	.release 	= simple_children_release,
-	.show_attribute	= simple_children_attr_show,
-};
-
-/*
- * Note that, since no extra work is required on ->drop_item(),
- * no ->drop_item() is provided.
- */
-static struct configfs_group_operations simple_children_group_ops = {
-	.make_item	= simple_children_make_item,
-};
-
-static struct config_item_type simple_children_type = {
-	.ct_item_ops	= &simple_children_item_ops,
-	.ct_group_ops	= &simple_children_group_ops,
-	.ct_attrs	= simple_children_attrs,
-	.ct_owner	= THIS_MODULE,
-};
-
-static struct configfs_subsystem simple_children_subsys = {
-	.su_group = {
-		.cg_item = {
-			.ci_namebuf = "02-simple-children",
-			.ci_type = &simple_children_type,
-		},
-	},
-};
-
-
-/* ----------------------------------------------------------------- */
-
-/*
- * 03-group-children
- *
- * This example reuses the simple_children group from above.  However,
- * the simple_children group is not the subsystem itself, it is a
- * child of the subsystem.  Creation of a group in the subsystem creates
- * a new simple_children group.  That group can then have simple_child
- * children of its own.
- */
-
-static struct config_group *group_children_make_group(struct config_group *group, const char *name)
-{
-	struct simple_children *simple_children;
-
-	simple_children = kzalloc(sizeof(struct simple_children),
-				  GFP_KERNEL);
-	if (!simple_children)
-		return ERR_PTR(-ENOMEM);
-
-
-	config_group_init_type_name(&simple_children->group, name,
-				    &simple_children_type);
-
-	return &simple_children->group;
-}
-
-static struct configfs_attribute group_children_attr_description = {
-	.ca_owner = THIS_MODULE,
-	.ca_name = "description",
-	.ca_mode = S_IRUGO,
-};
-
-static struct configfs_attribute *group_children_attrs[] = {
-	&group_children_attr_description,
-	NULL,
-};
-
-static ssize_t group_children_attr_show(struct config_item *item,
-			   		struct configfs_attribute *attr,
-			   		char *page)
-{
-	return sprintf(page,
-"[03-group-children]\n"
-"\n"
-"This subsystem allows the creation of child config_groups.  These\n"
-"groups are like the subsystem simple-children.\n");
-}
-
-static struct configfs_item_operations group_children_item_ops = {
-	.show_attribute	= group_children_attr_show,
-};
-
-/*
- * Note that, since no extra work is required on ->drop_item(),
- * no ->drop_item() is provided.
- */
-static struct configfs_group_operations group_children_group_ops = {
-	.make_group	= group_children_make_group,
-};
-
-static struct config_item_type group_children_type = {
-	.ct_item_ops	= &group_children_item_ops,
-	.ct_group_ops	= &group_children_group_ops,
-	.ct_attrs	= group_children_attrs,
-	.ct_owner	= THIS_MODULE,
-};
-
-static struct configfs_subsystem group_children_subsys = {
-	.su_group = {
-		.cg_item = {
-			.ci_namebuf = "03-group-children",
-			.ci_type = &group_children_type,
-		},
-	},
-};
-
-/* ----------------------------------------------------------------- */
-
-/*
- * We're now done with our subsystem definitions.
- * For convenience in this module, here's a list of them all.  It
- * allows the init function to easily register them.  Most modules
- * will only have one subsystem, and will only call register_subsystem
- * on it directly.
- */
-static struct configfs_subsystem *example_subsys[] = {
-	&childless_subsys.subsys,
-	&simple_children_subsys,
-	&group_children_subsys,
-	NULL,
-};
-
-static int __init configfs_example_init(void)
-{
-	int ret;
-	int i;
-	struct configfs_subsystem *subsys;
-
-	for (i = 0; example_subsys[i]; i++) {
-		subsys = example_subsys[i];
-
-		config_group_init(&subsys->su_group);
-		mutex_init(&subsys->su_mutex);
-		ret = configfs_register_subsystem(subsys);
-		if (ret) {
-			printk(KERN_ERR "Error %d while registering subsystem %s\n",
-			       ret,
-			       subsys->su_group.cg_item.ci_namebuf);
-			goto out_unregister;
-		}
-	}
-
-	return 0;
-
-out_unregister:
-	for (; i >= 0; i--) {
-		configfs_unregister_subsystem(example_subsys[i]);
-	}
-
-	return ret;
-}
-
-static void __exit configfs_example_exit(void)
-{
-	int i;
-
-	for (i = 0; example_subsys[i]; i++) {
-		configfs_unregister_subsystem(example_subsys[i]);
-	}
-}
-
-module_init(configfs_example_init);
-module_exit(configfs_example_exit);
-MODULE_LICENSE("GPL");
diff --git a/Documentation/filesystems/configfs/configfs_example_explicit.c b/Documentation/filesystems/configfs/configfs_example_explicit.c
new file mode 100644
index 000000000000..d428cc9f07f3
--- /dev/null
+++ b/Documentation/filesystems/configfs/configfs_example_explicit.c
@@ -0,0 +1,485 @@
+/*
+ * vim: noexpandtab ts=8 sts=0 sw=8:
+ *
+ * configfs_example_explicit.c - This file is a demonstration module
+ *      containing a number of configfs subsystems.  It explicitly defines
+ *      each structure without using the helper macros defined in
+ *      configfs.h.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public
+ * License as published by the Free Software Foundation; either
+ * version 2 of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public
+ * License along with this program; if not, write to the
+ * Free Software Foundation, Inc., 59 Temple Place - Suite 330,
+ * Boston, MA 021110-1307, USA.
+ *
+ * Based on sysfs:
+ * 	sysfs is Copyright (C) 2001, 2002, 2003 Patrick Mochel
+ *
+ * configfs Copyright (C) 2005 Oracle.  All rights reserved.
+ */
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+
+#include <linux/configfs.h>
+
+
+
+/*
+ * 01-childless
+ *
+ * This first example is a childless subsystem.  It cannot create
+ * any config_items.  It just has attributes.
+ *
+ * Note that we are enclosing the configfs_subsystem inside a container.
+ * This is not necessary if a subsystem has no attributes directly
+ * on the subsystem.  See the next example, 02-simple-children, for
+ * such a subsystem.
+ */
+
+struct childless {
+	struct configfs_subsystem subsys;
+	int showme;
+	int storeme;
+};
+
+struct childless_attribute {
+	struct configfs_attribute attr;
+	ssize_t (*show)(struct childless *, char *);
+	ssize_t (*store)(struct childless *, const char *, size_t);
+};
+
+static inline struct childless *to_childless(struct config_item *item)
+{
+	return item ? container_of(to_configfs_subsystem(to_config_group(item)), struct childless, subsys) : NULL;
+}
+
+static ssize_t childless_showme_read(struct childless *childless,
+				     char *page)
+{
+	ssize_t pos;
+
+	pos = sprintf(page, "%d\n", childless->showme);
+	childless->showme++;
+
+	return pos;
+}
+
+static ssize_t childless_storeme_read(struct childless *childless,
+				      char *page)
+{
+	return sprintf(page, "%d\n", childless->storeme);
+}
+
+static ssize_t childless_storeme_write(struct childless *childless,
+				       const char *page,
+				       size_t count)
+{
+	unsigned long tmp;
+	char *p = (char *) page;
+
+	tmp = simple_strtoul(p, &p, 10);
+	if (!p || (*p && (*p != '\n')))
+		return -EINVAL;
+
+	if (tmp > INT_MAX)
+		return -ERANGE;
+
+	childless->storeme = tmp;
+
+	return count;
+}
+
+static ssize_t childless_description_read(struct childless *childless,
+					  char *page)
+{
+	return sprintf(page,
+"[01-childless]\n"
+"\n"
+"The childless subsystem is the simplest possible subsystem in\n"
+"configfs.  It does not support the creation of child config_items.\n"
+"It only has a few attributes.  In fact, it isn't much different\n"
+"than a directory in /proc.\n");
+}
+
+static struct childless_attribute childless_attr_showme = {
+	.attr	= { .ca_owner = THIS_MODULE, .ca_name = "showme", .ca_mode = S_IRUGO },
+	.show	= childless_showme_read,
+};
+static struct childless_attribute childless_attr_storeme = {
+	.attr	= { .ca_owner = THIS_MODULE, .ca_name = "storeme", .ca_mode = S_IRUGO | S_IWUSR },
+	.show	= childless_storeme_read,
+	.store	= childless_storeme_write,
+};
+static struct childless_attribute childless_attr_description = {
+	.attr = { .ca_owner = THIS_MODULE, .ca_name = "description", .ca_mode = S_IRUGO },
+	.show = childless_description_read,
+};
+
+static struct configfs_attribute *childless_attrs[] = {
+	&childless_attr_showme.attr,
+	&childless_attr_storeme.attr,
+	&childless_attr_description.attr,
+	NULL,
+};
+
+static ssize_t childless_attr_show(struct config_item *item,
+				   struct configfs_attribute *attr,
+				   char *page)
+{
+	struct childless *childless = to_childless(item);
+	struct childless_attribute *childless_attr =
+		container_of(attr, struct childless_attribute, attr);
+	ssize_t ret = 0;
+
+	if (childless_attr->show)
+		ret = childless_attr->show(childless, page);
+	return ret;
+}
+
+static ssize_t childless_attr_store(struct config_item *item,
+				    struct configfs_attribute *attr,
+				    const char *page, size_t count)
+{
+	struct childless *childless = to_childless(item);
+	struct childless_attribute *childless_attr =
+		container_of(attr, struct childless_attribute, attr);
+	ssize_t ret = -EINVAL;
+
+	if (childless_attr->store)
+		ret = childless_attr->store(childless, page, count);
+	return ret;
+}
+
+static struct configfs_item_operations childless_item_ops = {
+	.show_attribute		= childless_attr_show,
+	.store_attribute	= childless_attr_store,
+};
+
+static struct config_item_type childless_type = {
+	.ct_item_ops	= &childless_item_ops,
+	.ct_attrs	= childless_attrs,
+	.ct_owner	= THIS_MODULE,
+};
+
+static struct childless childless_subsys = {
+	.subsys = {
+		.su_group = {
+			.cg_item = {
+				.ci_namebuf = "01-childless",
+				.ci_type = &childless_type,
+			},
+		},
+	},
+};
+
+
+/* ----------------------------------------------------------------- */
+
+/*
+ * 02-simple-children
+ *
+ * This example merely has a simple one-attribute child.  Note that
+ * there is no extra attribute structure, as the child's attribute is
+ * known from the get-go.  Also, there is no container for the
+ * subsystem, as it has no attributes of its own.
+ */
+
+struct simple_child {
+	struct config_item item;
+	int storeme;
+};
+
+static inline struct simple_child *to_simple_child(struct config_item *item)
+{
+	return item ? container_of(item, struct simple_child, item) : NULL;
+}
+
+static struct configfs_attribute simple_child_attr_storeme = {
+	.ca_owner = THIS_MODULE,
+	.ca_name = "storeme",
+	.ca_mode = S_IRUGO | S_IWUSR,
+};
+
+static struct configfs_attribute *simple_child_attrs[] = {
+	&simple_child_attr_storeme,
+	NULL,
+};
+
+static ssize_t simple_child_attr_show(struct config_item *item,
+				      struct configfs_attribute *attr,
+				      char *page)
+{
+	ssize_t count;
+	struct simple_child *simple_child = to_simple_child(item);
+
+	count = sprintf(page, "%d\n", simple_child->storeme);
+
+	return count;
+}
+
+static ssize_t simple_child_attr_store(struct config_item *item,
+				       struct configfs_attribute *attr,
+				       const char *page, size_t count)
+{
+	struct simple_child *simple_child = to_simple_child(item);
+	unsigned long tmp;
+	char *p = (char *) page;
+
+	tmp = simple_strtoul(p, &p, 10);
+	if (!p || (*p && (*p != '\n')))
+		return -EINVAL;
+
+	if (tmp > INT_MAX)
+		return -ERANGE;
+
+	simple_child->storeme = tmp;
+
+	return count;
+}
+
+static void simple_child_release(struct config_item *item)
+{
+	kfree(to_simple_child(item));
+}
+
+static struct configfs_item_operations simple_child_item_ops = {
+	.release		= simple_child_release,
+	.show_attribute		= simple_child_attr_show,
+	.store_attribute	= simple_child_attr_store,
+};
+
+static struct config_item_type simple_child_type = {
+	.ct_item_ops	= &simple_child_item_ops,
+	.ct_attrs	= simple_child_attrs,
+	.ct_owner	= THIS_MODULE,
+};
+
+
+struct simple_children {
+	struct config_group group;
+};
+
+static inline struct simple_children *to_simple_children(struct config_item *item)
+{
+	return item ? container_of(to_config_group(item), struct simple_children, group) : NULL;
+}
+
+static struct config_item *simple_children_make_item(struct config_group *group, const char *name)
+{
+	struct simple_child *simple_child;
+
+	simple_child = kzalloc(sizeof(struct simple_child), GFP_KERNEL);
+	if (!simple_child)
+		return ERR_PTR(-ENOMEM);
+
+	config_item_init_type_name(&simple_child->item, name,
+				   &simple_child_type);
+
+	simple_child->storeme = 0;
+
+	return &simple_child->item;
+}
+
+static struct configfs_attribute simple_children_attr_description = {
+	.ca_owner = THIS_MODULE,
+	.ca_name = "description",
+	.ca_mode = S_IRUGO,
+};
+
+static struct configfs_attribute *simple_children_attrs[] = {
+	&simple_children_attr_description,
+	NULL,
+};
+
+static ssize_t simple_children_attr_show(struct config_item *item,
+					 struct configfs_attribute *attr,
+					 char *page)
+{
+	return sprintf(page,
+"[02-simple-children]\n"
+"\n"
+"This subsystem allows the creation of child config_items.  These\n"
+"items have only one attribute that is readable and writeable.\n");
+}
+
+static void simple_children_release(struct config_item *item)
+{
+	kfree(to_simple_children(item));
+}
+
+static struct configfs_item_operations simple_children_item_ops = {
+	.release	= simple_children_release,
+	.show_attribute	= simple_children_attr_show,
+};
+
+/*
+ * Note that, since no extra work is required on ->drop_item(),
+ * no ->drop_item() is provided.
+ */
+static struct configfs_group_operations simple_children_group_ops = {
+	.make_item	= simple_children_make_item,
+};
+
+static struct config_item_type simple_children_type = {
+	.ct_item_ops	= &simple_children_item_ops,
+	.ct_group_ops	= &simple_children_group_ops,
+	.ct_attrs	= simple_children_attrs,
+	.ct_owner	= THIS_MODULE,
+};
+
+static struct configfs_subsystem simple_children_subsys = {
+	.su_group = {
+		.cg_item = {
+			.ci_namebuf = "02-simple-children",
+			.ci_type = &simple_children_type,
+		},
+	},
+};
+
+
+/* ----------------------------------------------------------------- */
+
+/*
+ * 03-group-children
+ *
+ * This example reuses the simple_children group from above.  However,
+ * the simple_children group is not the subsystem itself, it is a
+ * child of the subsystem.  Creation of a group in the subsystem creates
+ * a new simple_children group.  That group can then have simple_child
+ * children of its own.
+ */
+
+static struct config_group *group_children_make_group(struct config_group *group, const char *name)
+{
+	struct simple_children *simple_children;
+
+	simple_children = kzalloc(sizeof(struct simple_children),
+				  GFP_KERNEL);
+	if (!simple_children)
+		return ERR_PTR(-ENOMEM);
+
+	config_group_init_type_name(&simple_children->group, name,
+				    &simple_children_type);
+
+	return &simple_children->group;
+}
+
+static struct configfs_attribute group_children_attr_description = {
+	.ca_owner = THIS_MODULE,
+	.ca_name = "description",
+	.ca_mode = S_IRUGO,
+};
+
+static struct configfs_attribute *group_children_attrs[] = {
+	&group_children_attr_description,
+	NULL,
+};
+
+static ssize_t group_children_attr_show(struct config_item *item,
+					struct configfs_attribute *attr,
+					char *page)
+{
+	return sprintf(page,
+"[03-group-children]\n"
+"\n"
+"This subsystem allows the creation of child config_groups.  These\n"
+"groups are like the subsystem simple-children.\n");
+}
+
+static struct configfs_item_operations group_children_item_ops = {
+	.show_attribute	= group_children_attr_show,
+};
+
+/*
+ * Note that, since no extra work is required on ->drop_item(),
+ * no ->drop_item() is provided.
+ */
+static struct configfs_group_operations group_children_group_ops = {
+	.make_group	= group_children_make_group,
+};
+
+static struct config_item_type group_children_type = {
+	.ct_item_ops	= &group_children_item_ops,
+	.ct_group_ops	= &group_children_group_ops,
+	.ct_attrs	= group_children_attrs,
+	.ct_owner	= THIS_MODULE,
+};
+
+static struct configfs_subsystem group_children_subsys = {
+	.su_group = {
+		.cg_item = {
+			.ci_namebuf = "03-group-children",
+			.ci_type = &group_children_type,
+		},
+	},
+};
+
+/* ----------------------------------------------------------------- */
+
+/*
+ * We're now done with our subsystem definitions.
+ * For convenience in this module, here's a list of them all.  It
+ * allows the init function to easily register them.  Most modules
+ * will only have one subsystem, and will only call register_subsystem
+ * on it directly.
+ */
+static struct configfs_subsystem *example_subsys[] = {
+	&childless_subsys.subsys,
+	&simple_children_subsys,
+	&group_children_subsys,
+	NULL,
+};
+
+static int __init configfs_example_init(void)
+{
+	int ret;
+	int i;
+	struct configfs_subsystem *subsys;
+
+	for (i = 0; example_subsys[i]; i++) {
+		subsys = example_subsys[i];
+
+		config_group_init(&subsys->su_group);
+		mutex_init(&subsys->su_mutex);
+		ret = configfs_register_subsystem(subsys);
+		if (ret) {
+			printk(KERN_ERR "Error %d while registering subsystem %s\n",
+			       ret,
+			       subsys->su_group.cg_item.ci_namebuf);
+			goto out_unregister;
+		}
+	}
+
+	return 0;
+
+out_unregister:
+	for (; i >= 0; i--) {
+		configfs_unregister_subsystem(example_subsys[i]);
+	}
+
+	return ret;
+}
+
+static void __exit configfs_example_exit(void)
+{
+	int i;
+
+	for (i = 0; example_subsys[i]; i++) {
+		configfs_unregister_subsystem(example_subsys[i]);
+	}
+}
+
+module_init(configfs_example_init);
+module_exit(configfs_example_exit);
+MODULE_LICENSE("GPL");
diff --git a/Documentation/filesystems/configfs/configfs_example_macros.c b/Documentation/filesystems/configfs/configfs_example_macros.c
new file mode 100644
index 000000000000..d8e30a0378aa
--- /dev/null
+++ b/Documentation/filesystems/configfs/configfs_example_macros.c
@@ -0,0 +1,448 @@
+/*
+ * vim: noexpandtab ts=8 sts=0 sw=8:
+ *
+ * configfs_example_macros.c - This file is a demonstration module
+ *      containing a number of configfs subsystems.  It uses the helper
+ *      macros defined by configfs.h
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public
+ * License as published by the Free Software Foundation; either
+ * version 2 of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public
+ * License along with this program; if not, write to the
+ * Free Software Foundation, Inc., 59 Temple Place - Suite 330,
+ * Boston, MA 021110-1307, USA.
+ *
+ * Based on sysfs:
+ * 	sysfs is Copyright (C) 2001, 2002, 2003 Patrick Mochel
+ *
+ * configfs Copyright (C) 2005 Oracle.  All rights reserved.
+ */
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+
+#include <linux/configfs.h>
+
+
+
+/*
+ * 01-childless
+ *
+ * This first example is a childless subsystem.  It cannot create
+ * any config_items.  It just has attributes.
+ *
+ * Note that we are enclosing the configfs_subsystem inside a container.
+ * This is not necessary if a subsystem has no attributes directly
+ * on the subsystem.  See the next example, 02-simple-children, for
+ * such a subsystem.
+ */
+
+struct childless {
+	struct configfs_subsystem subsys;
+	int showme;
+	int storeme;
+};
+
+static inline struct childless *to_childless(struct config_item *item)
+{
+	return item ? container_of(to_configfs_subsystem(to_config_group(item)), struct childless, subsys) : NULL;
+}
+
+CONFIGFS_ATTR_STRUCT(childless);
+#define CHILDLESS_ATTR(_name, _mode, _show, _store)	\
+struct childless_attribute childless_attr_##_name = __CONFIGFS_ATTR(_name, _mode, _show, _store)
+#define CHILDLESS_ATTR_RO(_name, _show)	\
+struct childless_attribute childless_attr_##_name = __CONFIGFS_ATTR_RO(_name, _show);
+
+static ssize_t childless_showme_read(struct childless *childless,
+				     char *page)
+{
+	ssize_t pos;
+
+	pos = sprintf(page, "%d\n", childless->showme);
+	childless->showme++;
+
+	return pos;
+}
+
+static ssize_t childless_storeme_read(struct childless *childless,
+				      char *page)
+{
+	return sprintf(page, "%d\n", childless->storeme);
+}
+
+static ssize_t childless_storeme_write(struct childless *childless,
+				       const char *page,
+				       size_t count)
+{
+	unsigned long tmp;
+	char *p = (char *) page;
+
+	tmp = simple_strtoul(p, &p, 10);
+	if (!p || (*p && (*p != '\n')))
+		return -EINVAL;
+
+	if (tmp > INT_MAX)
+		return -ERANGE;
+
+	childless->storeme = tmp;
+
+	return count;
+}
+
+static ssize_t childless_description_read(struct childless *childless,
+					  char *page)
+{
+	return sprintf(page,
+"[01-childless]\n"
+"\n"
+"The childless subsystem is the simplest possible subsystem in\n"
+"configfs.  It does not support the creation of child config_items.\n"
+"It only has a few attributes.  In fact, it isn't much different\n"
+"than a directory in /proc.\n");
+}
+
+CHILDLESS_ATTR_RO(showme, childless_showme_read);
+CHILDLESS_ATTR(storeme, S_IRUGO | S_IWUSR, childless_storeme_read,
+	       childless_storeme_write);
+CHILDLESS_ATTR_RO(description, childless_description_read);
+
+static struct configfs_attribute *childless_attrs[] = {
+	&childless_attr_showme.attr,
+	&childless_attr_storeme.attr,
+	&childless_attr_description.attr,
+	NULL,
+};
+
+CONFIGFS_ATTR_OPS(childless);
+static struct configfs_item_operations childless_item_ops = {
+	.show_attribute		= childless_attr_show,
+	.store_attribute	= childless_attr_store,
+};
+
+static struct config_item_type childless_type = {
+	.ct_item_ops	= &childless_item_ops,
+	.ct_attrs	= childless_attrs,
+	.ct_owner	= THIS_MODULE,
+};
+
+static struct childless childless_subsys = {
+	.subsys = {
+		.su_group = {
+			.cg_item = {
+				.ci_namebuf = "01-childless",
+				.ci_type = &childless_type,
+			},
+		},
+	},
+};
+
+
+/* ----------------------------------------------------------------- */
+
+/*
+ * 02-simple-children
+ *
+ * This example merely has a simple one-attribute child.  Note that
+ * there is no extra attribute structure, as the child's attribute is
+ * known from the get-go.  Also, there is no container for the
+ * subsystem, as it has no attributes of its own.
+ */
+
+struct simple_child {
+	struct config_item item;
+	int storeme;
+};
+
+static inline struct simple_child *to_simple_child(struct config_item *item)
+{
+	return item ? container_of(item, struct simple_child, item) : NULL;
+}
+
+static struct configfs_attribute simple_child_attr_storeme = {
+	.ca_owner = THIS_MODULE,
+	.ca_name = "storeme",
+	.ca_mode = S_IRUGO | S_IWUSR,
+};
+
+static struct configfs_attribute *simple_child_attrs[] = {
+	&simple_child_attr_storeme,
+	NULL,
+};
+
+static ssize_t simple_child_attr_show(struct config_item *item,
+				      struct configfs_attribute *attr,
+				      char *page)
+{
+	ssize_t count;
+	struct simple_child *simple_child = to_simple_child(item);
+
+	count = sprintf(page, "%d\n", simple_child->storeme);
+
+	return count;
+}
+
+static ssize_t simple_child_attr_store(struct config_item *item,
+				       struct configfs_attribute *attr,
+				       const char *page, size_t count)
+{
+	struct simple_child *simple_child = to_simple_child(item);
+	unsigned long tmp;
+	char *p = (char *) page;
+
+	tmp = simple_strtoul(p, &p, 10);
+	if (!p || (*p && (*p != '\n')))
+		return -EINVAL;
+
+	if (tmp > INT_MAX)
+		return -ERANGE;
+
+	simple_child->storeme = tmp;
+
+	return count;
+}
+
+static void simple_child_release(struct config_item *item)
+{
+	kfree(to_simple_child(item));
+}
+
+static struct configfs_item_operations simple_child_item_ops = {
+	.release		= simple_child_release,
+	.show_attribute		= simple_child_attr_show,
+	.store_attribute	= simple_child_attr_store,
+};
+
+static struct config_item_type simple_child_type = {
+	.ct_item_ops	= &simple_child_item_ops,
+	.ct_attrs	= simple_child_attrs,
+	.ct_owner	= THIS_MODULE,
+};
+
+
+struct simple_children {
+	struct config_group group;
+};
+
+static inline struct simple_children *to_simple_children(struct config_item *item)
+{
+	return item ? container_of(to_config_group(item), struct simple_children, group) : NULL;
+}
+
+static struct config_item *simple_children_make_item(struct config_group *group, const char *name)
+{
+	struct simple_child *simple_child;
+
+	simple_child = kzalloc(sizeof(struct simple_child), GFP_KERNEL);
+	if (!simple_child)
+		return ERR_PTR(-ENOMEM);
+
+	config_item_init_type_name(&simple_child->item, name,
+				   &simple_child_type);
+
+	simple_child->storeme = 0;
+
+	return &simple_child->item;
+}
+
+static struct configfs_attribute simple_children_attr_description = {
+	.ca_owner = THIS_MODULE,
+	.ca_name = "description",
+	.ca_mode = S_IRUGO,
+};
+
+static struct configfs_attribute *simple_children_attrs[] = {
+	&simple_children_attr_description,
+	NULL,
+};
+
+static ssize_t simple_children_attr_show(struct config_item *item,
+					 struct configfs_attribute *attr,
+					 char *page)
+{
+	return sprintf(page,
+"[02-simple-children]\n"
+"\n"
+"This subsystem allows the creation of child config_items.  These\n"
+"items have only one attribute that is readable and writeable.\n");
+}
+
+static void simple_children_release(struct config_item *item)
+{
+	kfree(to_simple_children(item));
+}
+
+static struct configfs_item_operations simple_children_item_ops = {
+	.release	= simple_children_release,
+	.show_attribute	= simple_children_attr_show,
+};
+
+/*
+ * Note that, since no extra work is required on ->drop_item(),
+ * no ->drop_item() is provided.
+ */
+static struct configfs_group_operations simple_children_group_ops = {
+	.make_item	= simple_children_make_item,
+};
+
+static struct config_item_type simple_children_type = {
+	.ct_item_ops	= &simple_children_item_ops,
+	.ct_group_ops	= &simple_children_group_ops,
+	.ct_attrs	= simple_children_attrs,
+	.ct_owner	= THIS_MODULE,
+};
+
+static struct configfs_subsystem simple_children_subsys = {
+	.su_group = {
+		.cg_item = {
+			.ci_namebuf = "02-simple-children",
+			.ci_type = &simple_children_type,
+		},
+	},
+};
+
+
+/* ----------------------------------------------------------------- */
+
+/*
+ * 03-group-children
+ *
+ * This example reuses the simple_children group from above.  However,
+ * the simple_children group is not the subsystem itself, it is a
+ * child of the subsystem.  Creation of a group in the subsystem creates
+ * a new simple_children group.  That group can then have simple_child
+ * children of its own.
+ */
+
+static struct config_group *group_children_make_group(struct config_group *group, const char *name)
+{
+	struct simple_children *simple_children;
+
+	simple_children = kzalloc(sizeof(struct simple_children),
+				  GFP_KERNEL);
+	if (!simple_children)
+		return ERR_PTR(-ENOMEM);
+
+	config_group_init_type_name(&simple_children->group, name,
+				    &simple_children_type);
+
+	return &simple_children->group;
+}
+
+static struct configfs_attribute group_children_attr_description = {
+	.ca_owner = THIS_MODULE,
+	.ca_name = "description",
+	.ca_mode = S_IRUGO,
+};
+
+static struct configfs_attribute *group_children_attrs[] = {
+	&group_children_attr_description,
+	NULL,
+};
+
+static ssize_t group_children_attr_show(struct config_item *item,
+					struct configfs_attribute *attr,
+					char *page)
+{
+	return sprintf(page,
+"[03-group-children]\n"
+"\n"
+"This subsystem allows the creation of child config_groups.  These\n"
+"groups are like the subsystem simple-children.\n");
+}
+
+static struct configfs_item_operations group_children_item_ops = {
+	.show_attribute	= group_children_attr_show,
+};
+
+/*
+ * Note that, since no extra work is required on ->drop_item(),
+ * no ->drop_item() is provided.
+ */
+static struct configfs_group_operations group_children_group_ops = {
+	.make_group	= group_children_make_group,
+};
+
+static struct config_item_type group_children_type = {
+	.ct_item_ops	= &group_children_item_ops,
+	.ct_group_ops	= &group_children_group_ops,
+	.ct_attrs	= group_children_attrs,
+	.ct_owner	= THIS_MODULE,
+};
+
+static struct configfs_subsystem group_children_subsys = {
+	.su_group = {
+		.cg_item = {
+			.ci_namebuf = "03-group-children",
+			.ci_type = &group_children_type,
+		},
+	},
+};
+
+/* ----------------------------------------------------------------- */
+
+/*
+ * We're now done with our subsystem definitions.
+ * For convenience in this module, here's a list of them all.  It
+ * allows the init function to easily register them.  Most modules
+ * will only have one subsystem, and will only call register_subsystem
+ * on it directly.
+ */
+static struct configfs_subsystem *example_subsys[] = {
+	&childless_subsys.subsys,
+	&simple_children_subsys,
+	&group_children_subsys,
+	NULL,
+};
+
+static int __init configfs_example_init(void)
+{
+	int ret;
+	int i;
+	struct configfs_subsystem *subsys;
+
+	for (i = 0; example_subsys[i]; i++) {
+		subsys = example_subsys[i];
+
+		config_group_init(&subsys->su_group);
+		mutex_init(&subsys->su_mutex);
+		ret = configfs_register_subsystem(subsys);
+		if (ret) {
+			printk(KERN_ERR "Error %d while registering subsystem %s\n",
+			       ret,
+			       subsys->su_group.cg_item.ci_namebuf);
+			goto out_unregister;
+		}
+	}
+
+	return 0;
+
+out_unregister:
+	for (; i >= 0; i--) {
+		configfs_unregister_subsystem(example_subsys[i]);
+	}
+
+	return ret;
+}
+
+static void __exit configfs_example_exit(void)
+{
+	int i;
+
+	for (i = 0; example_subsys[i]; i++) {
+		configfs_unregister_subsystem(example_subsys[i]);
+	}
+}
+
+module_init(configfs_example_init);
+module_exit(configfs_example_exit);
+MODULE_LICENSE("GPL");
diff --git a/Documentation/filesystems/ext4.txt b/Documentation/filesystems/ext4.txt
index 80e193d82e2e..0d5394920a31 100644
--- a/Documentation/filesystems/ext4.txt
+++ b/Documentation/filesystems/ext4.txt
@@ -26,6 +26,12 @@ Mailing list: linux-ext4@vger.kernel.org
 
     git://git.kernel.org/pub/scm/fs/ext2/e2fsprogs.git
 
+  - Note that it is highly important to install the mke2fs.conf file
+    that comes with the e2fsprogs 1.41.x sources in /etc/mke2fs.conf. If
+    you have edited the /etc/mke2fs.conf file installed on your system,
+    you will need to merge your changes with the version from e2fsprogs
+    1.41.x.
+
   - Create a new filesystem using the ext4dev filesystem type:
 
     	# mke2fs -t ext4dev /dev/hda1
diff --git a/Documentation/filesystems/ntfs.txt b/Documentation/filesystems/ntfs.txt
index e79ee2db183a..ac2a261c5f7d 100644
--- a/Documentation/filesystems/ntfs.txt
+++ b/Documentation/filesystems/ntfs.txt
@@ -40,7 +40,7 @@ Web site
 ========
 
 There is plenty of additional information on the linux-ntfs web site
-at http://linux-ntfs.sourceforge.net/
+at http://www.linux-ntfs.org/
 
 The web site has a lot of additional information, such as a comprehensive
 FAQ, documentation on the NTFS on-disk format, information on the Linux-NTFS
@@ -272,7 +272,7 @@ And you would know that /dev/hda2 has a size of 37768814 - 4209030 + 1 =
 For Win2k and later dynamic disks, you can for example use the ldminfo utility
 which is part of the Linux LDM tools (the latest version at the time of
 writing is linux-ldm-0.0.8.tar.bz2).  You can download it from:
-	http://linux-ntfs.sourceforge.net/downloads.html
+	http://www.linux-ntfs.org/
 Simply extract the downloaded archive (tar xvjf linux-ldm-0.0.8.tar.bz2), go
 into it (cd linux-ldm-0.0.8) and change to the test directory (cd test).  You
 will find the precompiled (i386) ldminfo utility there.  NOTE: You will not be
diff --git a/Documentation/filesystems/omfs.txt b/Documentation/filesystems/omfs.txt
new file mode 100644
index 000000000000..1d0d41ff5c65
--- /dev/null
+++ b/Documentation/filesystems/omfs.txt
@@ -0,0 +1,106 @@
+Optimized MPEG Filesystem (OMFS)
+
+Overview
+========
+
+OMFS is a filesystem created by SonicBlue for use in the ReplayTV DVR
+and Rio Karma MP3 player.  The filesystem is extent-based, utilizing
+block sizes from 2k to 8k, with hash-based directories.  This
+filesystem driver may be used to read and write disks from these
+devices.
+
+Note, it is not recommended that this FS be used in place of a general
+filesystem for your own streaming media device.  Native Linux filesystems
+will likely perform better.
+
+More information is available at:
+
+    http://linux-karma.sf.net/
+
+Various utilities, including mkomfs and omfsck, are included with
+omfsprogs, available at:
+
+    http://bobcopeland.com/karma/
+
+Instructions are included in its README.
+
+Options
+=======
+
+OMFS supports the following mount-time options:
+
+    uid=n        - make all files owned by specified user
+    gid=n        - make all files owned by specified group
+    umask=xxx    - set permission umask to xxx
+    fmask=xxx    - set umask to xxx for files
+    dmask=xxx    - set umask to xxx for directories
+
+Disk format
+===========
+
+OMFS discriminates between "sysblocks" and normal data blocks.  The sysblock
+group consists of super block information, file metadata, directory structures,
+and extents.  Each sysblock has a header containing CRCs of the entire
+sysblock, and may be mirrored in successive blocks on the disk.  A sysblock may
+have a smaller size than a data block, but since they are both addressed by the
+same 64-bit block number, any remaining space in the smaller sysblock is
+unused.
+
+Sysblock header information:
+
+struct omfs_header {
+        __be64 h_self;                  /* FS block where this is located */
+        __be32 h_body_size;             /* size of useful data after header */
+        __be16 h_crc;                   /* crc-ccitt of body_size bytes */
+        char h_fill1[2];
+        u8 h_version;                   /* version, always 1 */
+        char h_type;                    /* OMFS_INODE_X */
+        u8 h_magic;                     /* OMFS_IMAGIC */
+        u8 h_check_xor;                 /* XOR of header bytes before this */
+        __be32 h_fill2;
+};
+
+Files and directories are both represented by omfs_inode:
+
+struct omfs_inode {
+        struct omfs_header i_head;      /* header */
+        __be64 i_parent;                /* parent containing this inode */
+        __be64 i_sibling;               /* next inode in hash bucket */
+        __be64 i_ctime;                 /* ctime, in milliseconds */
+        char i_fill1[35];
+        char i_type;                    /* OMFS_[DIR,FILE] */
+        __be32 i_fill2;
+        char i_fill3[64];
+        char i_name[OMFS_NAMELEN];      /* filename */
+        __be64 i_size;                  /* size of file, in bytes */
+};
+
+Directories in OMFS are implemented as a large hash table.  Filenames are
+hashed then prepended into the bucket list beginning at OMFS_DIR_START.
+Lookup requires hashing the filename, then seeking across i_sibling pointers
+until a match is found on i_name.  Empty buckets are represented by block
+pointers with all-1s (~0).
+
+A file is an omfs_inode structure followed by an extent table beginning at
+OMFS_EXTENT_START:
+
+struct omfs_extent_entry {
+        __be64 e_cluster;               /* start location of a set of blocks */
+        __be64 e_blocks;                /* number of blocks after e_cluster */
+};
+
+struct omfs_extent {
+        __be64 e_next;                  /* next extent table location */
+        __be32 e_extent_count;          /* total # extents in this table */
+        __be32 e_fill;
+        struct omfs_extent_entry e_entry;       /* start of extent entries */
+};
+
+Each extent holds the block offset followed by number of blocks allocated to
+the extent.  The final extent in each table is a terminator with e_cluster
+being ~0 and e_blocks being ones'-complement of the total number of blocks
+in the table.
+
+If this table overflows, a continuation inode is written and pointed to by
+e_next.  These have a header but lack the rest of the inode structure.
+
diff --git a/Documentation/filesystems/proc.txt b/Documentation/filesystems/proc.txt
index 8c6384bdfed4..394eb2cc1c39 100644
--- a/Documentation/filesystems/proc.txt
+++ b/Documentation/filesystems/proc.txt
@@ -931,7 +931,7 @@ group_prealloc  max_to_scan  mb_groups  mb_history  min_to_scan  order2_req
 stats  stream_req
 
 mb_groups:
-This file gives the details of mutiblock allocator buddy cache of free blocks
+This file gives the details of multiblock allocator buddy cache of free blocks
 
 mb_history:
 Multiblock allocation history.
@@ -1339,6 +1339,25 @@ Enables/Disables the protection of the per-process proc entries "maps" and
 "smaps".  When enabled, the contents of these files are visible only to
 readers that are allowed to ptrace() the given process.
 
+msgmni
+------
+
+Maximum number of message queue ids on the system.
+This value scales to the amount of lowmem. It is automatically recomputed
+upon memory add/remove or ipc namespace creation/removal.
+When a value is written into this file, msgmni's value becomes fixed, i.e. it
+is not recomputed anymore when one of the above events occurs.
+Use auto_msgmni to change this behavior.
+
+auto_msgmni
+-----------
+
+Enables/Disables automatic recomputing of msgmni upon memory add/remove or
+upon ipc namespace creation/removal (see the msgmni description above).
+Echoing "1" into this file enables msgmni automatic recomputing.
+Echoing "0" turns it off.
+auto_msgmni default value is 1.
+
 
 2.4 /proc/sys/vm - The virtual memory subsystem
 -----------------------------------------------
@@ -1474,7 +1493,7 @@ used because pages_free(1355) is smaller than watermark + protection[2]
 normal page requirement. If requirement is DMA zone(index=0), protection[0]
 (=0) is used.
 
-zone[i]'s protection[j] is calculated by following exprssion.
+zone[i]'s protection[j] is calculated by following expression.
 
 (i < j):
   zone[i]->protection[j]
diff --git a/Documentation/filesystems/quota.txt b/Documentation/filesystems/quota.txt
index a590c4093eff..5e8de25bf0f1 100644
--- a/Documentation/filesystems/quota.txt
+++ b/Documentation/filesystems/quota.txt
@@ -3,14 +3,14 @@ Quota subsystem
 ===============
 
 Quota subsystem allows system administrator to set limits on used space and
-number of used inodes (inode is a filesystem structure which is associated
-with each file or directory) for users and/or groups. For both used space and
-number of used inodes there are actually two limits. The first one is called
-softlimit and the second one hardlimit.  An user can never exceed a hardlimit
-for any resource. User is allowed to exceed softlimit but only for limited
-period of time. This period is called "grace period" or "grace time". When
-grace time is over, user is not able to allocate more space/inodes until he
-frees enough of them to get below softlimit.
+number of used inodes (inode is a filesystem structure which is associated with
+each file or directory) for users and/or groups. For both used space and number
+of used inodes there are actually two limits. The first one is called softlimit
+and the second one hardlimit.  An user can never exceed a hardlimit for any
+resource (unless he has CAP_SYS_RESOURCE capability). User is allowed to exceed
+softlimit but only for limited period of time. This period is called "grace
+period" or "grace time". When grace time is over, user is not able to allocate
+more space/inodes until he frees enough of them to get below softlimit.
 
 Quota limits (and amount of grace time) are set independently for each
 filesystem.
@@ -53,6 +53,12 @@ in parentheses):
 		QUOTA_NL_BSOFTLONGWARN - space (block) softlimit is exceeded
 		  longer than given grace period.
 		QUOTA_NL_BSOFTWARN - space (block) softlimit
+	  - four warnings are also defined for the event when user stops
+	    exceeding some limit:
+		QUOTA_NL_IHARDBELOW - inode hardlimit
+		QUOTA_NL_ISOFTBELOW - inode softlimit
+		QUOTA_NL_BHARDBELOW - space (block) hardlimit
+		QUOTA_NL_BSOFTBELOW - space (block) softlimit
         QUOTA_NL_A_DEV_MAJOR (u32)
 	  - major number of a device with the affected filesystem
         QUOTA_NL_A_DEV_MINOR (u32)
diff --git a/Documentation/filesystems/relay.txt b/Documentation/filesystems/relay.txt
index 094f2d2f38b1..510b722667ac 100644
--- a/Documentation/filesystems/relay.txt
+++ b/Documentation/filesystems/relay.txt
@@ -294,6 +294,16 @@ user-defined data with a channel, and is immediately available
 (including in create_buf_file()) via chan->private_data or
 buf->chan->private_data.
 
+Buffer-only channels
+--------------------
+
+These channels have no files associated and can be created with
+relay_open(NULL, NULL, ...). Such channels are useful in scenarios such
+as when doing early tracing in the kernel, before the VFS is up. In these
+cases, one may open a buffer-only channel and then call
+relay_late_setup_files() when the kernel is ready to handle files,
+to expose the buffered data to the userspace.
+
 Channel 'modes'
 ---------------
 
diff --git a/Documentation/filesystems/ubifs.txt b/Documentation/filesystems/ubifs.txt
index 540e9e7f59c5..6a0d70a22f05 100644
--- a/Documentation/filesystems/ubifs.txt
+++ b/Documentation/filesystems/ubifs.txt
@@ -57,7 +57,7 @@ Similarly to JFFS2, UBIFS supports on-the-flight compression which makes
 it possible to fit quite a lot of data to the flash.
 
 Similarly to JFFS2, UBIFS is tolerant of unclean reboots and power-cuts.
-It does not need stuff like ckfs.ext2. UBIFS automatically replays its
+It does not need stuff like fsck.ext2. UBIFS automatically replays its
 journal and recovers from crashes, ensuring that the on-flash data
 structures are consistent.
 
diff --git a/Documentation/filesystems/vfat.txt b/Documentation/filesystems/vfat.txt
index 2d5e1e582e13..bbac4f1d9056 100644
--- a/Documentation/filesystems/vfat.txt
+++ b/Documentation/filesystems/vfat.txt
@@ -96,6 +96,14 @@ shortname=lower|win95|winnt|mixed
 			emulate the Windows 95 rule for create.
 		 Default setting is `lower'.
 
+tz=UTC        -- Interpret timestamps as UTC rather than local time.
+                 This option disables the conversion of timestamps
+                 between local time (as used by Windows on FAT) and UTC
+                 (which Linux uses internally).  This is particuluarly
+                 useful when mounting devices (like digital cameras)
+                 that are set to UTC in order to avoid the pitfalls of
+                 local time.
+
 <bool>: 0,1,yes,no,true,false
 
 TODO
diff --git a/Documentation/filesystems/vfs.txt b/Documentation/filesystems/vfs.txt
index b7522c6cbae3..c4d348dabe94 100644
--- a/Documentation/filesystems/vfs.txt
+++ b/Documentation/filesystems/vfs.txt
@@ -143,7 +143,7 @@ struct file_system_type {
 
 The get_sb() method has the following arguments:
 
-  struct file_system_type *fs_type: decribes the filesystem, partly initialized
+  struct file_system_type *fs_type: describes the filesystem, partly initialized
   	by the specific filesystem code
 
   int flags: mount flags
@@ -895,9 +895,9 @@ struct dentry_operations {
 	iput() yourself
 
   d_dname: called when the pathname of a dentry should be generated.
-	Usefull for some pseudo filesystems (sockfs, pipefs, ...) to delay
+	Useful for some pseudo filesystems (sockfs, pipefs, ...) to delay
 	pathname generation. (Instead of doing it when dentry is created,
-	its done only when the path is needed.). Real filesystems probably
+	it's done only when the path is needed.). Real filesystems probably
 	dont want to use it, because their dentries are present in global
 	dcache hash, so their hash should be an invariant. As no lock is
 	held, d_dname() should not try to modify the dentry itself, unless
diff --git a/Documentation/ftrace.txt b/Documentation/ftrace.txt
index f218f616ff6b..d330fe3103da 100644
--- a/Documentation/ftrace.txt
+++ b/Documentation/ftrace.txt
@@ -4,6 +4,7 @@
 Copyright 2008 Red Hat Inc.
    Author:   Steven Rostedt <srostedt@redhat.com>
   License:   The GNU Free Documentation License, Version 1.2
+               (dual licensed under the GPL v2)
 Reviewers:   Elias Oltmanns, Randy Dunlap, Andrew Morton,
 	     John Kacur, and David Teigland.
 
diff --git a/Documentation/gpio.txt b/Documentation/gpio.txt
index c35ca9e40d4c..18022e249c53 100644
--- a/Documentation/gpio.txt
+++ b/Documentation/gpio.txt
@@ -347,15 +347,12 @@ necessarily be nonportable.
 Dynamic definition of GPIOs is not currently standard; for example, as
 a side effect of configuring an add-on board with some GPIO expanders.
 
-These calls are purely for kernel space, but a userspace API could be built
-on top of them.
-
 
 GPIO implementor's framework (OPTIONAL)
 =======================================
 As noted earlier, there is an optional implementation framework making it
 easier for platforms to support different kinds of GPIO controller using
-the same programming interface.
+the same programming interface.  This framework is called "gpiolib".
 
 As a debugging aid, if debugfs is available a /sys/kernel/debug/gpio file
 will be found there.  That will list all the controllers registered through
@@ -392,11 +389,21 @@ either NULL or the label associated with that GPIO when it was requested.
 
 Platform Support
 ----------------
-To support this framework, a platform's Kconfig will "select HAVE_GPIO_LIB"
+To support this framework, a platform's Kconfig will "select" either
+ARCH_REQUIRE_GPIOLIB or ARCH_WANT_OPTIONAL_GPIOLIB
 and arrange that its <asm/gpio.h> includes <asm-generic/gpio.h> and defines
 three functions: gpio_get_value(), gpio_set_value(), and gpio_cansleep().
 They may also want to provide a custom value for ARCH_NR_GPIOS.
 
+ARCH_REQUIRE_GPIOLIB means that the gpio-lib code will always get compiled
+into the kernel on that architecture.
+
+ARCH_WANT_OPTIONAL_GPIOLIB means the gpio-lib code defaults to off and the user
+can enable it and build it into the kernel optionally.
+
+If neither of these options are selected, the platform does not support
+GPIOs through GPIO-lib and the code cannot be enabled by the user.
+
 Trivial implementations of those functions can directly use framework
 code, which always dispatches through the gpio_chip:
 
@@ -439,4 +446,120 @@ becomes available.  That may mean the device should not be registered until
 calls for that GPIO can work.  One way to address such dependencies is for
 such gpio_chip controllers to provide setup() and teardown() callbacks to
 board specific code; those board specific callbacks would register devices
-once all the necessary resources are available.
+once all the necessary resources are available, and remove them later when
+the GPIO controller device becomes unavailable.
+
+
+Sysfs Interface for Userspace (OPTIONAL)
+========================================
+Platforms which use the "gpiolib" implementors framework may choose to
+configure a sysfs user interface to GPIOs.  This is different from the
+debugfs interface, since it provides control over GPIO direction and
+value instead of just showing a gpio state summary.  Plus, it could be
+present on production systems without debugging support.
+
+Given approprate hardware documentation for the system, userspace could
+know for example that GPIO #23 controls the write protect line used to
+protect boot loader segments in flash memory.  System upgrade procedures
+may need to temporarily remove that protection, first importing a GPIO,
+then changing its output state, then updating the code before re-enabling
+the write protection.  In normal use, GPIO #23 would never be touched,
+and the kernel would have no need to know about it.
+
+Again depending on appropriate hardware documentation, on some systems
+userspace GPIO can be used to determine system configuration data that
+standard kernels won't know about.  And for some tasks, simple userspace
+GPIO drivers could be all that the system really needs.
+
+Note that standard kernel drivers exist for common "LEDs and Buttons"
+GPIO tasks:  "leds-gpio" and "gpio_keys", respectively.  Use those
+instead of talking directly to the GPIOs; they integrate with kernel
+frameworks better than your userspace code could.
+
+
+Paths in Sysfs
+--------------
+There are three kinds of entry in /sys/class/gpio:
+
+   -	Control interfaces used to get userspace control over GPIOs;
+
+   -	GPIOs themselves; and
+
+   -	GPIO controllers ("gpio_chip" instances).
+
+That's in addition to standard files including the "device" symlink.
+
+The control interfaces are write-only:
+
+    /sys/class/gpio/
+
+    	"export" ... Userspace may ask the kernel to export control of
+		a GPIO to userspace by writing its number to this file.
+
+		Example:  "echo 19 > export" will create a "gpio19" node
+		for GPIO #19, if that's not requested by kernel code.
+
+    	"unexport" ... Reverses the effect of exporting to userspace.
+
+		Example:  "echo 19 > unexport" will remove a "gpio19"
+		node exported using the "export" file.
+
+GPIO signals have paths like /sys/class/gpio/gpio42/ (for GPIO #42)
+and have the following read/write attributes:
+
+    /sys/class/gpio/gpioN/
+
+	"direction" ... reads as either "in" or "out".  This value may
+		normally be written.  Writing as "out" defaults to
+		initializing the value as low.  To ensure glitch free
+		operation, values "low" and "high" may be written to
+		configure the GPIO as an output with that initial value.
+
+		Note that this attribute *will not exist* if the kernel
+		doesn't support changing the direction of a GPIO, or
+		it was exported by kernel code that didn't explicitly
+		allow userspace to reconfigure this GPIO's direction.
+
+	"value" ... reads as either 0 (low) or 1 (high).  If the GPIO
+		is configured as an output, this value may be written;
+		any nonzero value is treated as high.
+
+GPIO controllers have paths like /sys/class/gpio/chipchip42/ (for the
+controller implementing GPIOs starting at #42) and have the following
+read-only attributes:
+
+    /sys/class/gpio/gpiochipN/
+
+    	"base" ... same as N, the first GPIO managed by this chip
+
+    	"label" ... provided for diagnostics (not always unique)
+
+    	"ngpio" ... how many GPIOs this manges (N to N + ngpio - 1)
+
+Board documentation should in most cases cover what GPIOs are used for
+what purposes.  However, those numbers are not always stable; GPIOs on
+a daughtercard might be different depending on the base board being used,
+or other cards in the stack.  In such cases, you may need to use the
+gpiochip nodes (possibly in conjunction with schematics) to determine
+the correct GPIO number to use for a given signal.
+
+
+Exporting from Kernel code
+--------------------------
+Kernel code can explicitly manage exports of GPIOs which have already been
+requested using gpio_request():
+
+	/* export the GPIO to userspace */
+	int gpio_export(unsigned gpio, bool direction_may_change);
+
+	/* reverse gpio_export() */
+	void gpio_unexport();
+
+After a kernel driver requests a GPIO, it may only be made available in
+the sysfs interface by gpio_export().  The driver can control whether the
+signal direction may change.  This helps drivers prevent userspace code
+from accidentally clobbering important system state.
+
+This explicit exporting can help with debugging (by making some kinds
+of experiments easier), or can provide an always-there interface that's
+suitable for documenting as part of a board support package.
diff --git a/Documentation/hwmon/dme1737 b/Documentation/hwmon/dme1737
index 8f446070e64a..001d2e70bc11 100644
--- a/Documentation/hwmon/dme1737
+++ b/Documentation/hwmon/dme1737
@@ -10,6 +10,10 @@ Supported chips:
     Prefix: 'sch311x'
     Addresses scanned: none, address read from Super-I/O config space
     Datasheet: http://www.nuhorizons.com/FeaturedProducts/Volume1/SMSC/311x.pdf
+  * SMSC SCH5027
+    Prefix: 'sch5027'
+    Addresses scanned: I2C 0x2c, 0x2d, 0x2e
+    Datasheet: Provided by SMSC upon request and under NDA
 
 Authors:
     Juerg Haefliger <juergh@gmail.com>
@@ -22,34 +26,36 @@ Module Parameters
 			and PWM output control functions. Using this parameter
 			shouldn't be required since the BIOS usually takes care
 			of this.
-
-Note that there is no need to use this parameter if the driver loads without
-complaining. The driver will say so if it is necessary.
+* probe_all_addr: bool	Include non-standard LPC addresses 0x162e and 0x164e
+			when probing for ISA devices. This is required for the
+			following boards:
+			- VIA EPIA SN18000
 
 
 Description
 -----------
 
 This driver implements support for the hardware monitoring capabilities of the
-SMSC DME1737 and Asus A8000 (which are the same) and SMSC SCH311x Super-I/O
-chips. These chips feature monitoring of 3 temp sensors temp[1-3] (2 remote
-diodes and 1 internal), 7 voltages in[0-6] (6 external and 1 internal) and up
-to 6 fan speeds fan[1-6]. Additionally, the chips implement up to 5 PWM
-outputs pwm[1-3,5-6] for controlling fan speeds both manually and
+SMSC DME1737 and Asus A8000 (which are the same), SMSC SCH5027, and SMSC
+SCH311x Super-I/O chips. These chips feature monitoring of 3 temp sensors
+temp[1-3] (2 remote diodes and 1 internal), 7 voltages in[0-6] (6 external and
+1 internal) and up to 6 fan speeds fan[1-6]. Additionally, the chips implement
+up to 5 PWM outputs pwm[1-3,5-6] for controlling fan speeds both manually and
 automatically.
 
-For the DME1737 and A8000, fan[1-2] and pwm[1-2] are always present. Fan[3-6]
-and pwm[3,5-6] are optional features and their availability depends on the
-configuration of the chip. The driver will detect which features are present
-during initialization and create the sysfs attributes accordingly.
+For the DME1737, A8000 and SCH5027, fan[1-2] and pwm[1-2] are always present.
+Fan[3-6] and pwm[3,5-6] are optional features and their availability depends on
+the configuration of the chip. The driver will detect which features are
+present during initialization and create the sysfs attributes accordingly.
 
 For the SCH311x, fan[1-3] and pwm[1-3] are always present and fan[4-6] and
 pwm[5-6] don't exist.
 
-The hardware monitoring features of the DME1737 and A8000 are only accessible
-via SMBus, while the SCH311x only provides access via the ISA bus. The driver
-will therefore register itself as an I2C client driver if it detects a DME1737
-or A8000 and as a platform driver if it detects a SCH311x chip.
+The hardware monitoring features of the DME1737, A8000, and SCH5027 are only
+accessible via SMBus, while the SCH311x only provides access via the ISA bus.
+The driver will therefore register itself as an I2C client driver if it detects
+a DME1737, A8000, or SCH5027 and as a platform driver if it detects a SCH311x
+chip.
 
 
 Voltage Monitoring
@@ -60,6 +66,7 @@ scaling resistors. The values returned by the driver therefore reflect true
 millivolts and don't need scaling. The voltage inputs are mapped as follows
 (the last column indicates the input ranges):
 
+DME1737, A8000:
 	in0: +5VTR	(+5V standby)		0V - 6.64V
 	in1: Vccp	(processor core)	0V - 3V
 	in2: VCC	(internal +3.3V)	0V - 4.38V
@@ -68,6 +75,24 @@ millivolts and don't need scaling. The voltage inputs are mapped as follows
 	in5: VTR	(+3.3V standby)		0V - 4.38V
 	in6: Vbat	(+3.0V)			0V - 4.38V
 
+SCH311x:
+	in0: +2.5V				0V - 6.64V
+	in1: Vccp	(processor core)	0V - 2V
+	in2: VCC	(internal +3.3V)	0V - 4.38V
+	in3: +5V				0V - 6.64V
+	in4: +12V				0V - 16V
+	in5: VTR	(+3.3V standby)		0V - 4.38V
+	in6: Vbat	(+3.0V)			0V - 4.38V
+
+SCH5027:
+	in0: +5VTR	(+5V standby)		0V - 6.64V
+	in1: Vccp	(processor core)	0V - 3V
+	in2: VCC	(internal +3.3V)	0V - 4.38V
+	in3: V2_IN				0V - 1.5V
+	in4: V1_IN				0V - 1.5V
+	in5: VTR	(+3.3V standby)		0V - 4.38V
+	in6: Vbat	(+3.0V)			0V - 4.38V
+
 Each voltage input has associated min and max limits which trigger an alarm
 when crossed.
 
diff --git a/Documentation/hwmon/ibmaem b/Documentation/hwmon/ibmaem
index 2fefaf582a43..e98bdfea3467 100644
--- a/Documentation/hwmon/ibmaem
+++ b/Documentation/hwmon/ibmaem
@@ -1,8 +1,11 @@
 Kernel driver ibmaem
 ======================
 
+This driver talks to the IBM Systems Director Active Energy Manager, known
+henceforth as AEM.
+
 Supported systems:
-  * Any recent IBM System X server with Active Energy Manager support.
+  * Any recent IBM System X server with AEM support.
     This includes the x3350, x3550, x3650, x3655, x3755, x3850 M2,
     x3950 M2, and certain HS2x/LS2x/QS2x blades.  The IPMI host interface
     driver ("ipmi-si") needs to be loaded for this driver to do anything.
@@ -14,24 +17,22 @@ Author: Darrick J. Wong
 Description
 -----------
 
-This driver implements sensor reading support for the energy and power
-meters available on various IBM System X hardware through the BMC.  All
-sensor banks will be exported as platform devices; this driver can talk
-to both v1 and v2 interfaces.  This driver is completely separate from the
-older ibmpex driver.
+This driver implements sensor reading support for the energy and power meters
+available on various IBM System X hardware through the BMC.  All sensor banks
+will be exported as platform devices; this driver can talk to both v1 and v2
+interfaces.  This driver is completely separate from the older ibmpex driver.
 
-The v1 AEM interface has a simple set of features to monitor energy use.
-There is a register that displays an estimate of raw energy consumption
-since the last BMC reset, and a power sensor that returns average power
-use over a configurable interval.
+The v1 AEM interface has a simple set of features to monitor energy use.  There
+is a register that displays an estimate of raw energy consumption since the
+last BMC reset, and a power sensor that returns average power use over a
+configurable interval.
 
-The v2 AEM interface is a bit more sophisticated, being able to present
-a wider range of energy and power use registers, the power cap as
-set by the AEM software, and temperature sensors.
+The v2 AEM interface is a bit more sophisticated, being able to present a wider
+range of energy and power use registers, the power cap as set by the AEM
+software, and temperature sensors.
 
 Special Features
 ----------------
 
-The "power_cap" value displays the current system power cap, as set by
-the Active Energy Manager software.  Setting the power cap from the host
-is not currently supported.
+The "power_cap" value displays the current system power cap, as set by the AEM
+software.  Setting the power cap from the host is not currently supported.
diff --git a/Documentation/hwmon/it87 b/Documentation/hwmon/it87
index f4ce1fdbeff6..3496b7020e7c 100644
--- a/Documentation/hwmon/it87
+++ b/Documentation/hwmon/it87
@@ -6,12 +6,14 @@ Supported chips:
     Prefix: 'it87'
     Addresses scanned: from Super I/O config space (8 I/O ports)
     Datasheet: Publicly available at the ITE website
-               http://www.ite.com.tw/
+               http://www.ite.com.tw/product_info/file/pc/IT8705F_V.0.4.1.pdf
   * IT8712F
     Prefix: 'it8712'
     Addresses scanned: from Super I/O config space (8 I/O ports)
     Datasheet: Publicly available at the ITE website
-               http://www.ite.com.tw/
+               http://www.ite.com.tw/product_info/file/pc/IT8712F_V0.9.1.pdf
+               http://www.ite.com.tw/product_info/file/pc/Errata%20V0.1%20for%20IT8712F%20V0.9.1.pdf
+               http://www.ite.com.tw/product_info/file/pc/IT8712F_V0.9.3.pdf
   * IT8716F/IT8726F
     Prefix: 'it8716'
     Addresses scanned: from Super I/O config space (8 I/O ports)
@@ -90,14 +92,13 @@ upper VID bits share their pins with voltage inputs (in5 and in6) so you
 can't have both on a given board.
 
 The IT8716F, IT8718F and later IT8712F revisions have support for
-2 additional fans. They are supported by the driver for the IT8716F and
-IT8718F but not for the IT8712F
+2 additional fans. The additional fans are supported by the driver.
 
 The IT8716F and IT8718F, and late IT8712F and IT8705F also have optional
 16-bit tachometer counters for fans 1 to 3. This is better (no more fan
 clock divider mess) but not compatible with the older chips and
-revisions. For now, the driver only uses the 16-bit mode on the
-IT8716F and IT8718F.
+revisions. The 16-bit tachometer mode is enabled by the driver when one
+of the above chips is detected.
 
 The IT8726F is just bit enhanced IT8716F with additional hardware
 for AMD power sequencing. Therefore the chip will appear as IT8716F
diff --git a/Documentation/hwmon/lm85 b/Documentation/hwmon/lm85
index 9549237530cf..6d41db7f17f8 100644
--- a/Documentation/hwmon/lm85
+++ b/Documentation/hwmon/lm85
@@ -96,11 +96,6 @@ initial testing of the ADM1027 it was 1.00 degC steps. Analog Devices has
 confirmed this "bug". The ADT7463 is reported to work as described in the
 documentation. The current lm85 driver does not show the offset register.
 
-The ADT7463 has a THERM asserted counter. This counter has a 22.76ms
-resolution and a range of 5.8 seconds. The driver implements a 32-bit
-accumulator of the counter value to extend the range to over a year. The
-counter will stay at it's max value until read.
-
 See the vendor datasheets for more information. There is application note
 from National (AN-1260) with some additional information about the LM85.
 The Analog Devices datasheet is very detailed and describes a procedure for
@@ -206,13 +201,15 @@ Configuration choices:
 
 The National LM85's have two vendor specific configuration
 features. Tach. mode and Spinup Control. For more details on these,
-see the LM85 datasheet or Application Note AN-1260.
+see the LM85 datasheet or Application Note AN-1260. These features
+are not currently supported by the lm85 driver.
 
 The Analog Devices ADM1027 has several vendor specific enhancements.
 The number of pulses-per-rev of the fans can be set, Tach monitoring
 can be optimized for PWM operation, and an offset can be applied to
 the temperatures to compensate for systemic errors in the
-measurements.
+measurements. These features are not currently supported by the lm85
+driver.
 
 In addition to the ADM1027 features, the ADT7463 also has Tmin control
 and THERM asserted counts. Automatic Tmin control acts to adjust the
diff --git a/Documentation/hwmon/w83627hf b/Documentation/hwmon/w83627hf
index 880a59f53da9..6ee36dbafd64 100644
--- a/Documentation/hwmon/w83627hf
+++ b/Documentation/hwmon/w83627hf
@@ -40,10 +40,6 @@ Module Parameters
   (default is 1)
   Use 'init=0' to bypass initializing the chip.
   Try this if your computer crashes when you load the module.
-* reset: int
-  (default is 0)
-  The driver used to reset the chip on load, but does no more. Use
-  'reset=1' to restore the old behavior. Report if you need to do this.
 
 Description
 -----------
diff --git a/Documentation/hwmon/w83791d b/Documentation/hwmon/w83791d
index f153b2f6d62c..a67d3b7a7098 100644
--- a/Documentation/hwmon/w83791d
+++ b/Documentation/hwmon/w83791d
@@ -22,6 +22,7 @@ Credits:
 
 Additional contributors:
     Sven Anders <anders@anduras.de>
+    Marc Hulsman <m.hulsman@tudelft.nl>
 
 Module Parameters
 -----------------
@@ -67,9 +68,8 @@ on until the temperature falls below the Hysteresis value.
 
 Fan rotation speeds are reported in RPM (rotations per minute). An alarm is
 triggered if the rotation speed has dropped below a programmable limit. Fan
-readings can be divided by a programmable divider (1, 2, 4, 8 for fan 1/2/3
-and 1, 2, 4, 8, 16, 32, 64 or 128 for fan 4/5) to give the readings more
-range or accuracy.
+readings can be divided by a programmable divider (1, 2, 4, 8, 16,
+32, 64 or 128 for all fans) to give the readings more range or accuracy.
 
 Voltage sensors (also known as IN sensors) report their values in millivolts.
 An alarm is triggered if the voltage has crossed a programmable minimum
diff --git a/Documentation/i2c/upgrading-clients b/Documentation/i2c/upgrading-clients
new file mode 100644
index 000000000000..9a45f9bb6a25
--- /dev/null
+++ b/Documentation/i2c/upgrading-clients
@@ -0,0 +1,281 @@
+Upgrading I2C Drivers to the new 2.6 Driver Model
+=================================================
+
+Ben Dooks <ben-linux@fluff.org>
+
+Introduction
+------------
+
+This guide outlines how to alter existing Linux 2.6 client drivers from
+the old to the new new binding methods.
+
+
+Example old-style driver
+------------------------
+
+
+struct example_state {
+	struct i2c_client	client;
+	....
+};
+
+static struct i2c_driver example_driver;
+
+static unsigned short ignore[] = { I2C_CLIENT_END };
+static unsigned short normal_addr[] = { OUR_ADDR, I2C_CLIENT_END };
+
+I2C_CLIENT_INSMOD;
+
+static int example_attach(struct i2c_adapter *adap, int addr, int kind)
+{
+	struct example_state *state;
+	struct device *dev = &adap->dev;  /* to use for dev_ reports */
+	int ret;
+
+	state = kzalloc(sizeof(struct example_state), GFP_KERNEL);
+	if (state == NULL) {
+		dev_err(dev, "failed to create our state\n");
+		return -ENOMEM;
+	}
+
+	example->client.addr    = addr;
+	example->client.flags   = 0;
+	example->client.adapter = adap;
+
+	i2c_set_clientdata(&state->i2c_client, state);
+	strlcpy(client->i2c_client.name, "example", I2C_NAME_SIZE);
+
+	ret = i2c_attach_client(&state->i2c_client);
+	if (ret < 0) {
+		dev_err(dev, "failed to attach client\n");
+		kfree(state);
+		return ret;
+	}
+
+	dev = &state->i2c_client.dev;
+
+	/* rest of the initialisation goes here. */
+
+	dev_info(dev, "example client created\n");
+
+	return 0;
+}
+
+static int __devexit example_detach(struct i2c_client *client)
+{
+	struct example_state *state = i2c_get_clientdata(client);
+
+	i2c_detach_client(client);
+	kfree(state);
+	return 0;
+}
+
+static int example_attach_adapter(struct i2c_adapter *adap)
+{
+	return i2c_probe(adap, &addr_data, example_attach);
+}
+
+static struct i2c_driver example_driver = {
+ 	.driver		= {
+		.owner		= THIS_MODULE,
+		.name		= "example",
+	},
+	.attach_adapter = example_attach_adapter,
+	.detach_client	= __devexit_p(example_detach),
+	.suspend	= example_suspend,
+	.resume		= example_resume,
+};
+
+
+Updating the client
+-------------------
+
+The new style binding model will check against a list of supported
+devices and their associated address supplied by the code registering
+the busses. This means that the driver .attach_adapter and
+.detach_adapter methods can be removed, along with the addr_data,
+as follows:
+
+- static struct i2c_driver example_driver;
+
+- static unsigned short ignore[] = { I2C_CLIENT_END };
+- static unsigned short normal_addr[] = { OUR_ADDR, I2C_CLIENT_END };
+
+- I2C_CLIENT_INSMOD;
+
+- static int example_attach_adapter(struct i2c_adapter *adap)
+- {
+- 	return i2c_probe(adap, &addr_data, example_attach);
+- }
+
+ static struct i2c_driver example_driver = {
+-	.attach_adapter = example_attach_adapter,
+-	.detach_client	= __devexit_p(example_detach),
+ }
+
+Add the probe and remove methods to the i2c_driver, as so:
+
+ static struct i2c_driver example_driver = {
++	.probe		= example_probe,
++	.remove		= __devexit_p(example_remove),
+ }
+
+Change the example_attach method to accept the new parameters
+which include the i2c_client that it will be working with:
+
+- static int example_attach(struct i2c_adapter *adap, int addr, int kind)
++ static int example_probe(struct i2c_client *client,
++			   const struct i2c_device_id *id)
+
+Change the name of example_attach to example_probe to align it with the
+i2c_driver entry names. The rest of the probe routine will now need to be
+changed as the i2c_client has already been setup for use.
+
+The necessary client fields have already been setup before
+the probe function is called, so the following client setup
+can be removed:
+
+-	example->client.addr    = addr;
+-	example->client.flags   = 0;
+-	example->client.adapter = adap;
+-
+-	strlcpy(client->i2c_client.name, "example", I2C_NAME_SIZE);
+
+The i2c_set_clientdata is now:
+
+-	i2c_set_clientdata(&state->client, state);
++	i2c_set_clientdata(client, state);
+
+The call to i2c_attach_client is no longer needed, if the probe
+routine exits successfully, then the driver will be automatically
+attached by the core. Change the probe routine as so:
+
+-	ret = i2c_attach_client(&state->i2c_client);
+-	if (ret < 0) {
+-		dev_err(dev, "failed to attach client\n");
+-		kfree(state);
+-		return ret;
+-	}
+
+
+Remove the storage of 'struct i2c_client' from the 'struct example_state'
+as we are provided with the i2c_client in our example_probe. Instead we
+store a pointer to it for when it is needed.
+
+struct example_state {
+-	struct i2c_client	client;
++	struct i2c_client	*client;
+
+the new i2c client as so:
+
+-	struct device *dev = &adap->dev;  /* to use for dev_ reports */
++ 	struct device *dev = &i2c_client->dev;  /* to use for dev_ reports */
+
+And remove the change after our client is attached, as the driver no
+longer needs to register a new client structure with the core:
+
+-	dev = &state->i2c_client.dev;
+
+In the probe routine, ensure that the new state has the client stored
+in it:
+
+static int example_probe(struct i2c_client *i2c_client,
+			 const struct i2c_device_id *id)
+{
+	struct example_state *state;
+ 	struct device *dev = &i2c_client->dev;
+	int ret;
+
+	state = kzalloc(sizeof(struct example_state), GFP_KERNEL);
+	if (state == NULL) {
+		dev_err(dev, "failed to create our state\n");
+		return -ENOMEM;
+	}
+
++	state->client = i2c_client;
+
+Update the detach method, by changing the name to _remove and
+to delete the i2c_detach_client call. It is possible that you
+can also remove the ret variable as it is not not needed for
+any of the core functions.
+
+- static int __devexit example_detach(struct i2c_client *client)
++ static int __devexit example_remove(struct i2c_client *client)
+{
+	struct example_state *state = i2c_get_clientdata(client);
+
+-	i2c_detach_client(client);
+
+And finally ensure that we have the correct ID table for the i2c-core
+and other utilities:
+
++ struct i2c_device_id example_idtable[] = {
++       { "example", 0 },
++       { }
++};
++
++MODULE_DEVICE_TABLE(i2c, example_idtable);
+
+static struct i2c_driver example_driver = {
+ 	.driver		= {
+		.owner		= THIS_MODULE,
+		.name		= "example",
+	},
++	.id_table	= example_ids,
+
+
+Our driver should now look like this:
+
+struct example_state {
+	struct i2c_client	*client;
+	....
+};
+
+static int example_probe(struct i2c_client *client,
+		     	 const struct i2c_device_id *id)
+{
+	struct example_state *state;
+	struct device *dev = &client->dev;
+
+	state = kzalloc(sizeof(struct example_state), GFP_KERNEL);
+	if (state == NULL) {
+		dev_err(dev, "failed to create our state\n");
+		return -ENOMEM;
+	}
+
+	state->client = client;
+	i2c_set_clientdata(client, state);
+
+	/* rest of the initialisation goes here. */
+
+	dev_info(dev, "example client created\n");
+
+	return 0;
+}
+
+static int __devexit example_remove(struct i2c_client *client)
+{
+	struct example_state *state = i2c_get_clientdata(client);
+
+	kfree(state);
+	return 0;
+}
+
+static struct i2c_device_id example_idtable[] = {
+	{ "example", 0 },
+	{ }
+};
+
+MODULE_DEVICE_TABLE(i2c, example_idtable);
+
+static struct i2c_driver example_driver = {
+ 	.driver		= {
+		.owner		= THIS_MODULE,
+		.name		= "example",
+	},
+	.id_table	= example_idtable,
+	.probe		= example_probe,
+	.remove		= __devexit_p(example_remove),
+	.suspend	= example_suspend,
+	.resume		= example_resume,
+};
diff --git a/Documentation/ia64/Makefile b/Documentation/ia64/Makefile
new file mode 100644
index 000000000000..b75db69ec483
--- /dev/null
+++ b/Documentation/ia64/Makefile
@@ -0,0 +1,8 @@
+# kbuild trick to avoid linker error. Can be omitted if a module is built.
+obj- := dummy.o
+
+# List of programs to build
+hostprogs-y := aliasing-test
+
+# Tell kbuild to always build the programs
+always := $(hostprogs-y)
diff --git a/Documentation/ia64/kvm.txt b/Documentation/ia64/kvm.txt
index bec9d815da33..914d07f49268 100644
--- a/Documentation/ia64/kvm.txt
+++ b/Documentation/ia64/kvm.txt
@@ -50,9 +50,9 @@ Note: For step 2, please make sure that host page size == TARGET_PAGE_SIZE of qe
 		/usr/local/bin/qemu-system-ia64 -smp xx -m 512 -hda $your_image
 		(xx is the number of virtual processors for the guest, now the maximum value is 4)
 
-5. Known possibile issue on some platforms with old Firmware.
+5. Known possible issue on some platforms with old Firmware.
 
-If meet strange host crashe issues, try to solve it through either of the following ways:
+In the event of strange host crash issues, try to solve it through either of the following ways:
 
 (1): Upgrade your Firmware to the latest one.
 
@@ -65,8 +65,8 @@ index 0b53344..f02b0f7 100644
 	mov ar.pfs = loc1
 	mov rp = loc0
 	;;
--	srlz.d				// seralize restoration of psr.l
-+	srlz.i			// seralize restoration of psr.l
+-	srlz.d				// serialize restoration of psr.l
++	srlz.i			// serialize restoration of psr.l
 +	;;
 	br.ret.sptk.many b0
  END(ia64_pal_call_static)
diff --git a/Documentation/input/cs461x.txt b/Documentation/input/cs461x.txt
index afe0d6543e09..202e9dbacec3 100644
--- a/Documentation/input/cs461x.txt
+++ b/Documentation/input/cs461x.txt
@@ -31,7 +31,7 @@ The driver works with ALSA drivers simultaneously. For example, the xracer
 uses joystick as input device and PCM device as sound output in one time.
 There are no sound or input collisions detected. The source code have
 comments about them; but I've found the joystick can be initialized 
-separately of ALSA modules. So, you canm use only one joystick driver
+separately of ALSA modules. So, you can use only one joystick driver
 without ALSA drivers. The ALSA drivers are not needed to compile or
 run this driver.
 
diff --git a/Documentation/ioctl-number.txt b/Documentation/ioctl-number.txt
index 3bb5f466a90d..1c6b545635a2 100644
--- a/Documentation/ioctl-number.txt
+++ b/Documentation/ioctl-number.txt
@@ -105,7 +105,6 @@ Code	Seq#	Include File		Comments
 'T'	all	linux/soundcard.h	conflict!
 'T'	all	asm-i386/ioctls.h	conflict!
 'U'	00-EF	linux/drivers/usb/usb.h
-'U'	F0-FF	drivers/usb/auerswald.c
 'V'	all	linux/vt.h
 'W'	00-1F	linux/watchdog.h	conflict!
 'W'	00-1F	linux/wanrouter.h	conflict!
diff --git a/Documentation/ioctl/ioctl-decoding.txt b/Documentation/ioctl/ioctl-decoding.txt
index bfdf7f3ee4f0..e35efb0cec2e 100644
--- a/Documentation/ioctl/ioctl-decoding.txt
+++ b/Documentation/ioctl/ioctl-decoding.txt
@@ -1,6 +1,6 @@
 To decode a hex IOCTL code:
 
-Most architecures use this generic format, but check
+Most architectures use this generic format, but check
 include/ARCH/ioctl.h for specifics, e.g. powerpc
 uses 3 bits to encode read/write and 13 bits for size.
 
@@ -18,7 +18,7 @@ uses 3 bits to encode read/write and 13 bits for size.
  7-0	function #
 
 
- So for example 0x82187201 is a read with arg length of 0x218,
+So for example 0x82187201 is a read with arg length of 0x218,
 character 'r' function 1. Grepping the source reveals this is:
 
 #define VFAT_IOCTL_READDIR_BOTH         _IOR('r', 1, struct dirent [2])
diff --git a/Documentation/iostats.txt b/Documentation/iostats.txt
index 5925c3cd030d..59a69ec67c40 100644
--- a/Documentation/iostats.txt
+++ b/Documentation/iostats.txt
@@ -143,7 +143,7 @@ disk and partition statistics are consistent again. Since we still don't
 keep record of the partition-relative address, an operation is attributed to
 the partition which contains the first sector of the request after the
 eventual merges. As requests can be merged across partition, this could lead
-to some (probably insignificant) innacuracy.
+to some (probably insignificant) inaccuracy.
 
 Additional notes
 ----------------
diff --git a/Documentation/isdn/README.mISDN b/Documentation/isdn/README.mISDN
new file mode 100644
index 000000000000..cd8bf920e77b
--- /dev/null
+++ b/Documentation/isdn/README.mISDN
@@ -0,0 +1,6 @@
+mISDN is a new modular ISDN driver, in the long term it should replace
+the old I4L driver architecture for passiv ISDN cards.
+It was designed to allow a broad range of applications and interfaces
+but only have the basic function in kernel, the interface to the user
+space is based on sockets with a own address family AF_ISDN.
+
diff --git a/Documentation/ja_JP/HOWTO b/Documentation/ja_JP/HOWTO
index 488c77fa3aae..0775cf4798b2 100644
--- a/Documentation/ja_JP/HOWTO
+++ b/Documentation/ja_JP/HOWTO
@@ -11,14 +11,14 @@ for non English (read: Japanese) speakers and is not intended as a
 fork. So if you have any comments or updates for this file, please try
 to update the original English file first.
 
-Last Updated: 2007/11/16
+Last Updated: 2008/08/21
 ==================================
 �れ��
-linux-2.6.24/Documentation/HOWTO
+linux-2.6.27/Documentation/HOWTO
 �和訳��。
 
 翻訳団体： JF プロジェクト < http://www.linux.or.jp/JF/ >
-翻訳日： 2007/11/10
+翻訳日： 2008/8/5
 翻訳者： Tsugikazu Shibata <tshibata at ab dot jp dot nec dot com>
 校正者： �倉�ん <nbh--mats at nifty dot com>
          �林 雅典�ん (Masanori Kobayasi) <zap03216 at nifty dot ne dot jp>
@@ -287,13 +287,15 @@ Linux カーãƒ�ルã�®é–‹ç™ºãƒ—ロセスã�¯ç�¾åœ¨å¹¾ã�¤ã�‹ã�®ç•°ã�ªã‚‹ãƒ¡ã‚¤ãƒ³ã‚
     �安定��状態��る�判断�����リリース�れ��。目標�毎週新
     �� -rc カー�ルをリリース�る����。
 
-   - 以下� URL �� -rc リリース�存在�る既知�後戻り�題�リスト
-     �追跡�れ��-
-     http://kernelnewbies.org/known_regressions
-
   - ��プロセス�カー�ル� 「準備������考�られる��継続��
     �。��プロセス����� 6週間継続���。
 
+  - �リリース��既知�後戻り�題(regression: ��リリース�中�新�
+    �作り込�れ��題を指�) ���都度 Linux-kernel メーリングリスト
+    �投稿�れ��。ゴール�����カー�ル� 「準備������宣言
+    �る����リスト�長�をゼロ�減ら��������実���数個�
+    後戻り�題�リリース時�����残�������。
+
 Andrew Morton � Linux-kernel メーリングリスト�カー�ルリリース���
 �書����を���言�������価値��り��-
   「カー�ル���リリース�れる��誰も知り��ん。���ら��れ��
@@ -303,18 +305,20 @@ Andrew Morton ã�Œ Linux-kernel メーリングリストã�«ã‚«ãƒ¼ãƒ�ルリリーã
 2.6.x.y -stable カー�ルツリー
 ---------------------------
 
-�ージョン�4�目�数字����カー�ル� -stable カー�ル��。�れ�
-��2.6.x カー�ル�見����セキュリティ�題や�大�後戻り�対�る比
-較的������修正���れ��。
+�ージョン番��4��数字�分�れ��るカー�ル� -stable カー�ル��。
+�れ���2.6.x カー�ル�見����セキュリティ�題や�大�後戻り�対
+�る比較的������修正���れ��。
 
 �れ��開発/実験的�ージョン�テスト��力�る���興味�無��
 最新�安定��カー�ルを使���ユーザ�推奨�るブラン���。
 
-も��2.6.x.y カー�ル�存在���場����番��一番大�� 2.6.x
-�最新�安定版カー�ル��。
+も��2.6.x.y カー�ル�存在���場����番��一番大�� 2.6.x �
+最新�安定版カー�ル��。
 
-2.6.x.y � "stable" �ーム <stable@kernel.org> �メンテ�れ��り��
-���隔週�リリース�れ����。
+2.6.x.y � "stable" �ーム <stable@kernel.org> �メンテ�れ��り�必
+��応��リリース�れ��。通常�リリース期間� 2週間毎����差�迫�
+��題���れ�も�少�長��る��も�り��。セキュリティ関連��題
+�場���れ�対�������場�����リリース��れ��。
 
 カー�ルツリー�入���る�Documentation/stable_kernel_rules.txt ファ
 イル����よ��種類�変更� -stable ツリー���入れ�能����リ
@@ -341,7 +345,9 @@ linux-kernel メーリングリストã�§å�Žé›†ã�•ã‚Œã�Ÿå¤šæ•°ã�®ãƒ‘ッãƒ�ã�¨å�Œæ
 メインライン�入れるよ�� Linus �プッシュ���。
 
 メインカー�ルツリー���る��� Linus ��る�������新��パッ
-�� -mm ツリー�テスト�れる���強�推奨�れ��。
+�� -mm ツリー�テスト�れる���強�推奨�れ����。マージウィン
+ドウ�開��� -mm ツリー��れ����パッ��メインライン�マージ�
+れる���困難��り��。
 
 �れら�カー�ル�安定��動作���システム���使�����切���
 り��ん��カー�ルブラン��中�もも��も動作�リスク�高�も���。
@@ -395,13 +401,15 @@ linux-kernel メーリングリストã�§å�Žé›†ã�•ã‚Œã�Ÿå¤šæ•°ã�®ãƒ‘ッãƒ�ã�¨å�Œæ
     - pcmcia, Dominik Brodowski <linux@dominikbrodowski.net>
 	git.kernel.org:/pub/scm/linux/kernel/git/brodo/pcmcia-2.6.git
 
-    - SCSI, James Bottomley <James.Bottomley@SteelEye.com>
+    - SCSI, James Bottomley <James.Bottomley@hansenpartnership.com>
 	git.kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6.git
 
+    - x86, Ingo Molnar <mingo@elte.hu>
+	git://git.kernel.org/pub/scm/linux/kernel/git/x86/linux-2.6-x86.git
+
   quilt ツリー-
-    - USB, PCI ドライ�コア� I2C, Greg Kroah-Hartman <gregkh@suse.de>
+    - USB, ドライ�コア� I2C, Greg Kroah-Hartman <gregkh@suse.de>
 	kernel.org/pub/linux/kernel/people/gregkh/gregkh-2.6/
-    - x86-64 � i386 �仲間 Andi Kleen <ak@suse.de>
 
   ��他�カー�ルツリー� http://git.kernel.org/ � MAINTAINERS ファ
   イル�一覧表��り��。
@@ -412,13 +420,32 @@ linux-kernel メーリングリストã�§å�Žé›†ã�•ã‚Œã�Ÿå¤šæ•°ã�®ãƒ‘ッãƒ�ã�¨å�Œæ
 bugzilla.kernel.org � Linux カー�ル開発者�カー�ル��グを追跡�る
 場所��。ユーザ�見����グ�全�を��ツール�報告�����。
 �� kernel bugzilla を使���詳細��以下を�照������-
-	http://test.kernel.org/bugzilla/faq.html
-
+	http://bugzilla.kernel.org/page.cgi?id=faq.html
 メインカー�ルソースディレクトリ��るファイル REPORTING-BUGS �カー�
 ル�グら��も�������レ�ート�る��良�テンプレート��り��
 題�追跡を助�る���カー�ル開発者�����ん�情報�必�����詳
 細�書�れ����。
 
+�グレ�ート�管�
+-------------------
+
+�����ッキング�スキルを訓練�る最高�方法������他人�レ�ー
+ト���グを修正�る����り��。����カー�ルをより安定化��る
+��寄与�る��������������� �実��題を修正�る��を
+学��自分�スキルも強化�����他�開発者�����存在�気���
+��。�グを修正�る����多��開発者�中�ら自分�功績を��る最善
+��������ら多��人�他人��グ�修正�時間を浪費�る��を好�
+���ら��。
+
+���レ�ート�れ��グ����仕事を�る�����
+http://bugzilla.kernel.org �行������。も�今後��グレ�ート�
+���アド�イスを�������れ��bugme-new メーリングリスト(新�
+��グレ�ート������メール�れる) ��� bugme-janitor メーリン
+グリスト(bugzilla �変更毎����メール�れる)を購読����。
+
+	http://lists.linux-foundation.org/mailman/listinfo/bugme-new
+	http://lists.linux-foundation.org/mailman/listinfo/bugme-janitors
+
 メーリングリスト
 -------------
 
diff --git a/Documentation/ja_JP/SubmitChecklist b/Documentation/ja_JP/SubmitChecklist
new file mode 100644
index 000000000000..6c42e071d723
--- /dev/null
+++ b/Documentation/ja_JP/SubmitChecklist
@@ -0,0 +1,111 @@
+NOTE:
+This is a version of Documentation/SubmitChecklist into Japanese.
+This document is maintained by Takenori Nagano <t-nagano@ah.jp.nec.com>
+and the JF Project team <http://www.linux.or.jp/JF/>.
+If you find any difference between this document and the original file
+or a problem with the translation,
+please contact the maintainer of this file or JF project.
+
+Please also note that the purpose of this file is to be easier to read
+for non English (read: Japanese) speakers and is not intended as a
+fork. So if you have any comments or updates of this file, please try
+to update the original English file first.
+
+Last Updated: 2008/07/14
+==================================
+�れ��
+linux-2.6.26/Documentation/SubmitChecklist �和訳��。
+
+翻訳団体： JF プロジェクト < http://www.linux.or.jp/JF/ >
+翻訳日： 2008/07/14
+翻訳者： Takenori Nagano <t-nagano at ah dot jp dot nec dot com>
+校正者： Masanori Kobayashi �ん <zap03216 at nifty dot ne dot jp>
+==================================
+
+
+Linux カー�ルパッ�投稿者���ェックリスト
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+本書���パッ�をより素早��り込ん�もら���開発者�実践���基本的�事柄
+を����紹介���。����る全��事柄��Documentation/SubmittingPatches
+���Linuxカー�ルパッ�投稿�際���心得を補足�るも���。
+
+ 1: 妥当�CONFIGオプションや変更�れ�CONFIGオプション���り =y, =m, =n
+    全��正��ビルド��る��を確�������。��際�gcc��リンカ�
+    warningやerrorを出�������も確�������。
+
+ 2: allnoconfig, allmodconfig オプションを用��正��ビルド��る��を
+    確�������。
+
+ 3: 手許�クロスコンパイルツールやOSDL�PLM�よ��も�を用���複数�
+    アーキテク�ャ����も正��ビルド��る��を確�������。
+
+ 4: 64bit長�'unsigned long'を使用���るppc64��クロスコンパイル��
+    �ェック��当�アーキテク�ャ��。
+
+ 5: カー�ルコーディングスタイル�準拠���る����確�������(!)
+
+ 6: CONFIGオプション�追加・変更を��場����CONFIGメニュー�壊れ����
+    ��を確�������。
+
+ 7: 新��Kconfig�オプションを追加�る際���必���helpも記述������。
+
+ 8: �切�Kconfig��存関係を考���ら慎���ェック������。
+    ������作業�マシンを使��テスト���ん�行�����も困難��。
+    ���やる���自分�頭�考�る����。
+
+ 9: sparseを利用���ゃん���コード�ェックを������。
+
+10: 'make checkstack' � 'make namespacecheck' を利用���題�発見�れ�ら
+    修正������。'make checkstack' �明示的��題を示���ん���れ�
+    １��関数�512�イトより大��スタックを使���れ��修正���候補�
+    �り��。
+
+11: グロー�ル�kernel API を説明�る kernel-doc をソース�中��������。
+    ( static�関数�����必須���り��ん�����もら��も�構�� )
+    ����'make htmldocs' も��� 'make mandocs' を利用��追記��
+    ドキュメント��ェックを行���題�見����場���修正を行������。
+
+12: CONFIG_PREEMPT, CONFIG_DEBUG_PREEMPT, CONFIG_DEBUG_SLAB,
+    CONFIG_DEBUG_PAGEALLOC, CONFIG_DEBUG_MUTEXES, CONFIG_DEBUG_SPINLOCK,
+    CONFIG_DEBUG_SPINLOCK_SLEEP �れら全�を�時�有効���動作確�を
+    行������。
+
+13: CONFIG_SMP, CONFIG_PREEMPT を有効���場��無効���場��両方�
+    ビルド��上�動作確�を行������。
+
+14: も�パッ��ディスク�I/O性能���影響を与�るよ���れ��
+    'CONFIG_LBD'オプションを有効���場��無効���場��両方�
+    テストを実施��������。
+
+15: lockdep�機能を全�有効���上��全��コードパスを評価������。
+
+16: /proc �新��エントリを追加��場����Documentation/ �下�
+    必�ドキュメントを追加������。
+
+17: 新��ブートパラメータを追加��場����
+    必�Documentation/kernel-parameters.txt �説明を追加������。
+
+18: 新��module�パラメータを追加��場����MODULE_PARM_DESC()を
+    利用��必���説明を記述������。
+
+19: 新��userspaceインタフェースを作���場����Documentation/ABI/ �
+    Documentation/ABI/README を�考���必�ドキュメントを追加������。
+
+20: 'make headers_check'を実行��全��題�����を確�������。
+
+21: 少���もslabアロケーション�pageアロケーション�失敗��場��
+    挙動�����fault-injectionを利用��確�������。
+    Documentation/fault-injection/ を�照������。
+
+    追加��コード���り�������ら��サブシステム特有�
+    fault-injectionを追加�����良��も�れ��ん。
+
+22: 新��追加��コード��`gcc -W'�コンパイル������。
+    ��オプション�大�����メッセージを出力�����
+    "warning: comparison between signed and unsigned" �よ��メッセージ��
+    �グを見��る��役�立���。
+
+23: 投稿��パッ�� -mm パッ�セット�マージ�れ�後�全��既存�パッ�や
+    VM, VFS �よ���他�サブシステム�関�る様々�変更���時点�も共存
+    ��る��を確��るテストを行������。
diff --git a/Documentation/kdump/kdump.txt b/Documentation/kdump/kdump.txt
index 9691c7f5166c..0705040531a5 100644
--- a/Documentation/kdump/kdump.txt
+++ b/Documentation/kdump/kdump.txt
@@ -65,26 +65,26 @@ Install kexec-tools
 
 2) Download the kexec-tools user-space package from the following URL:
 
-http://www.kernel.org/pub/linux/kernel/people/horms/kexec-tools/kexec-tools-testing.tar.gz
+http://www.kernel.org/pub/linux/kernel/people/horms/kexec-tools/kexec-tools.tar.gz
 
-This is a symlink to the latest version, which at the time of writing is
-20061214, the only release of kexec-tools-testing so far. As other versions
-are released, the older ones will remain available at
-http://www.kernel.org/pub/linux/kernel/people/horms/kexec-tools/
+This is a symlink to the latest version.
 
-Note: Latest kexec-tools-testing git tree is available at
+The latest kexec-tools git tree is available at:
 
-git://git.kernel.org/pub/scm/linux/kernel/git/horms/kexec-tools-testing.git
+git://git.kernel.org/pub/scm/linux/kernel/git/horms/kexec-tools.git
 or
-http://www.kernel.org/git/?p=linux/kernel/git/horms/kexec-tools-testing.git;a=summary
+http://www.kernel.org/git/?p=linux/kernel/git/horms/kexec-tools.git
+
+More information about kexec-tools can be found at
+http://www.kernel.org/pub/linux/kernel/people/horms/kexec-tools/README.html
 
 3) Unpack the tarball with the tar command, as follows:
 
-   tar xvpzf kexec-tools-testing.tar.gz
+   tar xvpzf kexec-tools.tar.gz
 
 4) Change to the kexec-tools directory, as follows:
 
-   cd kexec-tools-testing-VERSION
+   cd kexec-tools-VERSION
 
 5) Configure the package, as follows:
 
diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt
index 497a98dafdaa..1de51110e622 100644
--- a/Documentation/kernel-parameters.txt
+++ b/Documentation/kernel-parameters.txt
@@ -365,6 +365,8 @@ and is between 256 and 4096 characters. It is defined in the file
 			no delay (0).
 			Format: integer
 
+	bootmem_debug	[KNL] Enable bootmem allocator debug messages.
+
 	bttv.card=	[HW,V4L] bttv (bt848 + bt878 based grabber cards)
 	bttv.radio=	Most important insmod options are available as
 			kernel args too.
@@ -1072,6 +1074,9 @@ and is between 256 and 4096 characters. It is defined in the file
 
 			* [no]ncq: Turn on or off NCQ.
 
+			* nohrst, nosrst, norst: suppress hard, soft
+                          and both resets.
+
 			If there are multiple matching configurations changing
 			the same attribute, the last one is used.
 
@@ -1420,6 +1425,12 @@ and is between 256 and 4096 characters. It is defined in the file
 
 	nolapic_timer	[X86-32,APIC] Do not use the local APIC timer.
 
+	nox2apic	[X86-64,APIC] Do not enable x2APIC mode.
+
+	x2apic_phys	[X86-64,APIC] Use x2apic physical mode instead of
+			default x2apic cluster mode on platforms
+			supporting x2apic.
+
 	noltlbs		[PPC] Do not use large page/tlb entries for kernel
 			lowmem mapping on PPC40x.
 
@@ -1877,6 +1888,12 @@ and is between 256 and 4096 characters. It is defined in the file
 	shapers=	[NET]
 			Maximal number of shapers.
 
+	show_msr=	[x86] show boot-time MSR settings
+			Format: { <integer> }
+			Show boot-time (BIOS-initialized) MSR settings.
+			The parameter means the number of CPUs to show,
+			for example 1 means boot CPU only.
+
 	sim710=		[SCSI,HW]
 			See header of drivers/scsi/sim710.c.
 
@@ -2159,13 +2176,6 @@ and is between 256 and 4096 characters. It is defined in the file
 			<deci-seconds>: poll all this frequency
 			0: no polling (default)
 
-	tipar.timeout=	[HW,PPT]
-			Set communications timeout in tenths of a second
-			(default 15).
-
-	tipar.delay=	[HW,PPT]
-			Set inter-bit delay in microseconds (default 10).
-
 	tmscsim=	[HW,SCSI]
 			See comment before function dc390_setup() in
 			drivers/scsi/tmscsim.c.
diff --git a/Documentation/keys.txt b/Documentation/keys.txt
index d5c7a57d1700..b56aacc1fff8 100644
--- a/Documentation/keys.txt
+++ b/Documentation/keys.txt
@@ -864,7 +864,7 @@ payload contents" for more information.
     request_key_with_auxdata() respectively.
 
     These two functions return with the key potentially still under
-    construction.  To wait for contruction completion, the following should be
+    construction.  To wait for construction completion, the following should be
     called:
 
 	int wait_for_key_construction(struct key *key, bool intr);
diff --git a/Documentation/leds-class.txt b/Documentation/leds-class.txt
index 18860ad9935a..6399557cdab3 100644
--- a/Documentation/leds-class.txt
+++ b/Documentation/leds-class.txt
@@ -59,7 +59,7 @@ Hardware accelerated blink of LEDs
 
 Some LEDs can be programmed to blink without any CPU interaction. To
 support this feature, a LED driver can optionally implement the
-blink_set() function (see <linux/leds.h>). If implemeted, triggers can
+blink_set() function (see <linux/leds.h>). If implemented, triggers can
 attempt to use it before falling back to software timers. The blink_set()
 function should return 0 if the blink setting is supported, or -EINVAL
 otherwise, which means that LED blinking will be handled by software.
diff --git a/Documentation/lguest/lguest.c b/Documentation/lguest/lguest.c
index 82fafe0429fe..7228369d1014 100644
--- a/Documentation/lguest/lguest.c
+++ b/Documentation/lguest/lguest.c
@@ -36,11 +36,13 @@
 #include <sched.h>
 #include <limits.h>
 #include <stddef.h>
+#include <signal.h>
 #include "linux/lguest_launcher.h"
 #include "linux/virtio_config.h"
 #include "linux/virtio_net.h"
 #include "linux/virtio_blk.h"
 #include "linux/virtio_console.h"
+#include "linux/virtio_rng.h"
 #include "linux/virtio_ring.h"
 #include "asm-x86/bootparam.h"
 /*L:110 We can ignore the 39 include files we need for this program, but I do
@@ -64,8 +66,8 @@ typedef uint8_t u8;
 #endif
 /* We can have up to 256 pages for devices. */
 #define DEVICE_PAGES 256
-/* This will occupy 2 pages: it must be a power of 2. */
-#define VIRTQUEUE_NUM 128
+/* This will occupy 3 pages: it must be a power of 2. */
+#define VIRTQUEUE_NUM 256
 
 /*L:120 verbose is both a global flag and a macro.  The C preprocessor allows
  * this, and although I wouldn't recommend it, it works quite nicely here. */
@@ -74,12 +76,19 @@ static bool verbose;
 	do { if (verbose) printf(args); } while(0)
 /*:*/
 
-/* The pipe to send commands to the waker process */
-static int waker_fd;
+/* File descriptors for the Waker. */
+struct {
+	int pipe[2];
+	int lguest_fd;
+} waker_fds;
+
 /* The pointer to the start of guest memory. */
 static void *guest_base;
 /* The maximum guest physical address allowed, and maximum possible. */
 static unsigned long guest_limit, guest_max;
+/* The pipe for signal hander to write to. */
+static int timeoutpipe[2];
+static unsigned int timeout_usec = 500;
 
 /* a per-cpu variable indicating whose vcpu is currently running */
 static unsigned int __thread cpu_id;
@@ -155,11 +164,14 @@ struct virtqueue
 	/* Last available index we saw. */
 	u16 last_avail_idx;
 
-	/* The routine to call when the Guest pings us. */
-	void (*handle_output)(int fd, struct virtqueue *me);
+	/* The routine to call when the Guest pings us, or timeout. */
+	void (*handle_output)(int fd, struct virtqueue *me, bool timeout);
 
 	/* Outstanding buffers */
 	unsigned int inflight;
+
+	/* Is this blocked awaiting a timer? */
+	bool blocked;
 };
 
 /* Remember the arguments to the program so we can "reboot" */
@@ -190,6 +202,9 @@ static void *_convert(struct iovec *iov, size_t size, size_t align,
 	return iov->iov_base;
 }
 
+/* Wrapper for the last available index.  Makes it easier to change. */
+#define lg_last_avail(vq)	((vq)->last_avail_idx)
+
 /* The virtio configuration space is defined to be little-endian.  x86 is
  * little-endian too, but it's nice to be explicit so we have these helpers. */
 #define cpu_to_le16(v16) (v16)
@@ -199,6 +214,33 @@ static void *_convert(struct iovec *iov, size_t size, size_t align,
 #define le32_to_cpu(v32) (v32)
 #define le64_to_cpu(v64) (v64)
 
+/* Is this iovec empty? */
+static bool iov_empty(const struct iovec iov[], unsigned int num_iov)
+{
+	unsigned int i;
+
+	for (i = 0; i < num_iov; i++)
+		if (iov[i].iov_len)
+			return false;
+	return true;
+}
+
+/* Take len bytes from the front of this iovec. */
+static void iov_consume(struct iovec iov[], unsigned num_iov, unsigned len)
+{
+	unsigned int i;
+
+	for (i = 0; i < num_iov; i++) {
+		unsigned int used;
+
+		used = iov[i].iov_len < len ? iov[i].iov_len : len;
+		iov[i].iov_base += used;
+		iov[i].iov_len -= used;
+		len -= used;
+	}
+	assert(len == 0);
+}
+
 /* The device virtqueue descriptors are followed by feature bitmasks. */
 static u8 *get_feature_bits(struct device *dev)
 {
@@ -254,6 +296,7 @@ static void *map_zeroed_pages(unsigned int num)
 		    PROT_READ|PROT_WRITE|PROT_EXEC, MAP_PRIVATE, fd, 0);
 	if (addr == MAP_FAILED)
 		err(1, "Mmaping %u pages of /dev/zero", num);
+	close(fd);
 
 	return addr;
 }
@@ -540,69 +583,64 @@ static void add_device_fd(int fd)
  * watch, but handing a file descriptor mask through to the kernel is fairly
  * icky.
  *
- * Instead, we fork off a process which watches the file descriptors and writes
+ * Instead, we clone off a thread which watches the file descriptors and writes
  * the LHREQ_BREAK command to the /dev/lguest file descriptor to tell the Host
  * stop running the Guest.  This causes the Launcher to return from the
  * /dev/lguest read with -EAGAIN, where it will write to /dev/lguest to reset
  * the LHREQ_BREAK and wake us up again.
  *
  * This, of course, is merely a different *kind* of icky.
+ *
+ * Given my well-known antipathy to threads, I'd prefer to use processes.  But
+ * it's easier to share Guest memory with threads, and trivial to share the
+ * devices.infds as the Launcher changes it.
  */
-static void wake_parent(int pipefd, int lguest_fd)
+static int waker(void *unused)
 {
-	/* Add the pipe from the Launcher to the fdset in the device_list, so
-	 * we watch it, too. */
-	add_device_fd(pipefd);
+	/* Close the write end of the pipe: only the Launcher has it open. */
+	close(waker_fds.pipe[1]);
 
 	for (;;) {
 		fd_set rfds = devices.infds;
 		unsigned long args[] = { LHREQ_BREAK, 1 };
+		unsigned int maxfd = devices.max_infd;
+
+		/* We also listen to the pipe from the Launcher. */
+		FD_SET(waker_fds.pipe[0], &rfds);
+		if (waker_fds.pipe[0] > maxfd)
+			maxfd = waker_fds.pipe[0];
 
 		/* Wait until input is ready from one of the devices. */
-		select(devices.max_infd+1, &rfds, NULL, NULL, NULL);
-		/* Is it a message from the Launcher? */
-		if (FD_ISSET(pipefd, &rfds)) {
-			int fd;
-			/* If read() returns 0, it means the Launcher has
-			 * exited.  We silently follow. */
-			if (read(pipefd, &fd, sizeof(fd)) == 0)
-				exit(0);
-			/* Otherwise it's telling us to change what file
-			 * descriptors we're to listen to.  Positive means
-			 * listen to a new one, negative means stop
-			 * listening. */
-			if (fd >= 0)
-				FD_SET(fd, &devices.infds);
-			else
-				FD_CLR(-fd - 1, &devices.infds);
-		} else /* Send LHREQ_BREAK command. */
-			pwrite(lguest_fd, args, sizeof(args), cpu_id);
+		select(maxfd+1, &rfds, NULL, NULL, NULL);
+
+		/* Message from Launcher? */
+		if (FD_ISSET(waker_fds.pipe[0], &rfds)) {
+			char c;
+			/* If this fails, then assume Launcher has exited.
+			 * Don't do anything on exit: we're just a thread! */
+			if (read(waker_fds.pipe[0], &c, 1) != 1)
+				_exit(0);
+			continue;
+		}
+
+		/* Send LHREQ_BREAK command to snap the Launcher out of it. */
+		pwrite(waker_fds.lguest_fd, args, sizeof(args), cpu_id);
 	}
+	return 0;
 }
 
 /* This routine just sets up a pipe to the Waker process. */
-static int setup_waker(int lguest_fd)
-{
-	int pipefd[2], child;
-
-	/* We create a pipe to talk to the Waker, and also so it knows when the
-	 * Launcher dies (and closes pipe). */
-	pipe(pipefd);
-	child = fork();
-	if (child == -1)
-		err(1, "forking");
-
-	if (child == 0) {
-		/* We are the Waker: close the "writing" end of our copy of the
-		 * pipe and start waiting for input. */
-		close(pipefd[1]);
-		wake_parent(pipefd[0], lguest_fd);
-	}
-	/* Close the reading end of our copy of the pipe. */
-	close(pipefd[0]);
+static void setup_waker(int lguest_fd)
+{
+	/* This pipe is closed when Launcher dies, telling Waker. */
+	if (pipe(waker_fds.pipe) != 0)
+		err(1, "Creating pipe for Waker");
+
+	/* Waker also needs to know the lguest fd */
+	waker_fds.lguest_fd = lguest_fd;
 
-	/* Here is the fd used to talk to the waker. */
-	return pipefd[1];
+	if (clone(waker, malloc(4096) + 4096, CLONE_VM | SIGCHLD, NULL) == -1)
+		err(1, "Creating Waker");
 }
 
 /*
@@ -661,19 +699,22 @@ static unsigned get_vq_desc(struct virtqueue *vq,
 			    unsigned int *out_num, unsigned int *in_num)
 {
 	unsigned int i, head;
+	u16 last_avail;
 
 	/* Check it isn't doing very strange things with descriptor numbers. */
-	if ((u16)(vq->vring.avail->idx - vq->last_avail_idx) > vq->vring.num)
+	last_avail = lg_last_avail(vq);
+	if ((u16)(vq->vring.avail->idx - last_avail) > vq->vring.num)
 		errx(1, "Guest moved used index from %u to %u",
-		     vq->last_avail_idx, vq->vring.avail->idx);
+		     last_avail, vq->vring.avail->idx);
 
 	/* If there's nothing new since last we looked, return invalid. */
-	if (vq->vring.avail->idx == vq->last_avail_idx)
+	if (vq->vring.avail->idx == last_avail)
 		return vq->vring.num;
 
 	/* Grab the next descriptor number they're advertising, and increment
 	 * the index we've seen. */
-	head = vq->vring.avail->ring[vq->last_avail_idx++ % vq->vring.num];
+	head = vq->vring.avail->ring[last_avail % vq->vring.num];
+	lg_last_avail(vq)++;
 
 	/* If their number is silly, that's a fatal mistake. */
 	if (head >= vq->vring.num)
@@ -821,8 +862,8 @@ static bool handle_console_input(int fd, struct device *dev)
 				unsigned long args[] = { LHREQ_BREAK, 0 };
 				/* Close the fd so Waker will know it has to
 				 * exit. */
-				close(waker_fd);
-				/* Just in case waker is blocked in BREAK, send
+				close(waker_fds.pipe[1]);
+				/* Just in case Waker is blocked in BREAK, send
 				 * unbreak now. */
 				write(fd, args, sizeof(args));
 				exit(2);
@@ -839,7 +880,7 @@ static bool handle_console_input(int fd, struct device *dev)
 
 /* Handling output for console is simple: we just get all the output buffers
  * and write them to stdout. */
-static void handle_console_output(int fd, struct virtqueue *vq)
+static void handle_console_output(int fd, struct virtqueue *vq, bool timeout)
 {
 	unsigned int head, out, in;
 	int len;
@@ -854,6 +895,24 @@ static void handle_console_output(int fd, struct virtqueue *vq)
 	}
 }
 
+/* This is called when we no longer want to hear about Guest changes to a
+ * virtqueue.  This is more efficient in high-traffic cases, but it means we
+ * have to set a timer to check if any more changes have occurred. */
+static void block_vq(struct virtqueue *vq)
+{
+	struct itimerval itm;
+
+	vq->vring.used->flags |= VRING_USED_F_NO_NOTIFY;
+	vq->blocked = true;
+
+	itm.it_interval.tv_sec = 0;
+	itm.it_interval.tv_usec = 0;
+	itm.it_value.tv_sec = 0;
+	itm.it_value.tv_usec = timeout_usec;
+
+	setitimer(ITIMER_REAL, &itm, NULL);
+}
+
 /*
  * The Network
  *
@@ -861,22 +920,39 @@ static void handle_console_output(int fd, struct virtqueue *vq)
  * and write them (ignoring the first element) to this device's file descriptor
  * (/dev/net/tun).
  */
-static void handle_net_output(int fd, struct virtqueue *vq)
+static void handle_net_output(int fd, struct virtqueue *vq, bool timeout)
 {
-	unsigned int head, out, in;
+	unsigned int head, out, in, num = 0;
 	int len;
 	struct iovec iov[vq->vring.num];
+	static int last_timeout_num;
 
 	/* Keep getting output buffers from the Guest until we run out. */
 	while ((head = get_vq_desc(vq, iov, &out, &in)) != vq->vring.num) {
 		if (in)
 			errx(1, "Input buffers in output queue?");
-		/* Check header, but otherwise ignore it (we told the Guest we
-		 * supported no features, so it shouldn't have anything
-		 * interesting). */
-		(void)convert(&iov[0], struct virtio_net_hdr);
-		len = writev(vq->dev->fd, iov+1, out-1);
+		len = writev(vq->dev->fd, iov, out);
+		if (len < 0)
+			err(1, "Writing network packet to tun");
 		add_used_and_trigger(fd, vq, head, len);
+		num++;
+	}
+
+	/* Block further kicks and set up a timer if we saw anything. */
+	if (!timeout && num)
+		block_vq(vq);
+
+	/* We never quite know how long should we wait before we check the
+	 * queue again for more packets.  We start at 500 microseconds, and if
+	 * we get fewer packets than last time, we assume we made the timeout
+	 * too small and increase it by 10 microseconds.  Otherwise, we drop it
+	 * by one microsecond every time.  It seems to work well enough. */
+	if (timeout) {
+		if (num < last_timeout_num)
+			timeout_usec += 10;
+		else if (timeout_usec > 1)
+			timeout_usec--;
+		last_timeout_num = num;
 	}
 }
 
@@ -887,7 +963,6 @@ static bool handle_tun_input(int fd, struct device *dev)
 	unsigned int head, in_num, out_num;
 	int len;
 	struct iovec iov[dev->vq->vring.num];
-	struct virtio_net_hdr *hdr;
 
 	/* First we need a network buffer from the Guests's recv virtqueue. */
 	head = get_vq_desc(dev->vq, iov, &out_num, &in_num);
@@ -896,25 +971,23 @@ static bool handle_tun_input(int fd, struct device *dev)
 		 * early, the Guest won't be ready yet.  Wait until the device
 		 * status says it's ready. */
 		/* FIXME: Actually want DRIVER_ACTIVE here. */
-		if (dev->desc->status & VIRTIO_CONFIG_S_DRIVER_OK)
-			warn("network: no dma buffer!");
+
+		/* Now tell it we want to know if new things appear. */
+		dev->vq->vring.used->flags &= ~VRING_USED_F_NO_NOTIFY;
+		wmb();
+
 		/* We'll turn this back on if input buffers are registered. */
 		return false;
 	} else if (out_num)
 		errx(1, "Output buffers in network recv queue?");
 
-	/* First element is the header: we set it to 0 (no features). */
-	hdr = convert(&iov[0], struct virtio_net_hdr);
-	hdr->flags = 0;
-	hdr->gso_type = VIRTIO_NET_HDR_GSO_NONE;
-
 	/* Read the packet from the device directly into the Guest's buffer. */
-	len = readv(dev->fd, iov+1, in_num-1);
+	len = readv(dev->fd, iov, in_num);
 	if (len <= 0)
 		err(1, "reading network");
 
 	/* Tell the Guest about the new packet. */
-	add_used_and_trigger(fd, dev->vq, head, sizeof(*hdr) + len);
+	add_used_and_trigger(fd, dev->vq, head, len);
 
 	verbose("tun input packet len %i [%02x %02x] (%s)\n", len,
 		((u8 *)iov[1].iov_base)[0], ((u8 *)iov[1].iov_base)[1],
@@ -927,11 +1000,18 @@ static bool handle_tun_input(int fd, struct device *dev)
 /*L:215 This is the callback attached to the network and console input
  * virtqueues: it ensures we try again, in case we stopped console or net
  * delivery because Guest didn't have any buffers. */
-static void enable_fd(int fd, struct virtqueue *vq)
+static void enable_fd(int fd, struct virtqueue *vq, bool timeout)
 {
 	add_device_fd(vq->dev->fd);
-	/* Tell waker to listen to it again */
-	write(waker_fd, &vq->dev->fd, sizeof(vq->dev->fd));
+	/* Snap the Waker out of its select loop. */
+	write(waker_fds.pipe[1], "", 1);
+}
+
+static void net_enable_fd(int fd, struct virtqueue *vq, bool timeout)
+{
+	/* We don't need to know again when Guest refills receive buffer. */
+	vq->vring.used->flags |= VRING_USED_F_NO_NOTIFY;
+	enable_fd(fd, vq, timeout);
 }
 
 /* When the Guest tells us they updated the status field, we handle it. */
@@ -951,7 +1031,7 @@ static void update_device_status(struct device *dev)
 		for (vq = dev->vq; vq; vq = vq->next) {
 			memset(vq->vring.desc, 0,
 			       vring_size(vq->config.num, getpagesize()));
-			vq->last_avail_idx = 0;
+			lg_last_avail(vq) = 0;
 		}
 	} else if (dev->desc->status & VIRTIO_CONFIG_S_FAILED) {
 		warnx("Device %s configuration FAILED", dev->name);
@@ -960,10 +1040,10 @@ static void update_device_status(struct device *dev)
 
 		verbose("Device %s OK: offered", dev->name);
 		for (i = 0; i < dev->desc->feature_len; i++)
-			verbose(" %08x", get_feature_bits(dev)[i]);
+			verbose(" %02x", get_feature_bits(dev)[i]);
 		verbose(", accepted");
 		for (i = 0; i < dev->desc->feature_len; i++)
-			verbose(" %08x", get_feature_bits(dev)
+			verbose(" %02x", get_feature_bits(dev)
 				[dev->desc->feature_len+i]);
 
 		if (dev->ready)
@@ -1000,7 +1080,7 @@ static void handle_output(int fd, unsigned long addr)
 			if (strcmp(vq->dev->name, "console") != 0)
 				verbose("Output to %s\n", vq->dev->name);
 			if (vq->handle_output)
-				vq->handle_output(fd, vq);
+				vq->handle_output(fd, vq, false);
 			return;
 		}
 	}
@@ -1014,6 +1094,29 @@ static void handle_output(int fd, unsigned long addr)
 	      strnlen(from_guest_phys(addr), guest_limit - addr));
 }
 
+static void handle_timeout(int fd)
+{
+	char buf[32];
+	struct device *i;
+	struct virtqueue *vq;
+
+	/* Clear the pipe */
+	read(timeoutpipe[0], buf, sizeof(buf));
+
+	/* Check each device and virtqueue: flush blocked ones. */
+	for (i = devices.dev; i; i = i->next) {
+		for (vq = i->vq; vq; vq = vq->next) {
+			if (!vq->blocked)
+				continue;
+
+			vq->vring.used->flags &= ~VRING_USED_F_NO_NOTIFY;
+			vq->blocked = false;
+			if (vq->handle_output)
+				vq->handle_output(fd, vq, true);
+		}
+	}
+}
+
 /* This is called when the Waker wakes us up: check for incoming file
  * descriptors. */
 static void handle_input(int fd)
@@ -1024,16 +1127,20 @@ static void handle_input(int fd)
 	for (;;) {
 		struct device *i;
 		fd_set fds = devices.infds;
+		int num;
 
+		num = select(devices.max_infd+1, &fds, NULL, NULL, &poll);
+		/* Could get interrupted */
+		if (num < 0)
+			continue;
 		/* If nothing is ready, we're done. */
-		if (select(devices.max_infd+1, &fds, NULL, NULL, &poll) == 0)
+		if (num == 0)
 			break;
 
 		/* Otherwise, call the device(s) which have readable file
 		 * descriptors and a method of handling them.  */
 		for (i = devices.dev; i; i = i->next) {
 			if (i->handle_input && FD_ISSET(i->fd, &fds)) {
-				int dev_fd;
 				if (i->handle_input(fd, i))
 					continue;
 
@@ -1043,13 +1150,12 @@ static void handle_input(int fd)
 				 * buffers to deliver into.  Console also uses
 				 * it when it discovers that stdin is closed. */
 				FD_CLR(i->fd, &devices.infds);
-				/* Tell waker to ignore it too, by sending a
-				 * negative fd number (-1, since 0 is a valid
-				 * FD number). */
-				dev_fd = -i->fd - 1;
-				write(waker_fd, &dev_fd, sizeof(dev_fd));
 			}
 		}
+
+		/* Is this the timeout fd? */
+		if (FD_ISSET(timeoutpipe[0], &fds))
+			handle_timeout(fd);
 	}
 }
 
@@ -1098,7 +1204,7 @@ static struct lguest_device_desc *new_dev_desc(u16 type)
 /* Each device descriptor is followed by the description of its virtqueues.  We
  * specify how many descriptors the virtqueue is to have. */
 static void add_virtqueue(struct device *dev, unsigned int num_descs,
-			  void (*handle_output)(int fd, struct virtqueue *me))
+			  void (*handle_output)(int, struct virtqueue *, bool))
 {
 	unsigned int pages;
 	struct virtqueue **i, *vq = malloc(sizeof(*vq));
@@ -1114,6 +1220,7 @@ static void add_virtqueue(struct device *dev, unsigned int num_descs,
 	vq->last_avail_idx = 0;
 	vq->dev = dev;
 	vq->inflight = 0;
+	vq->blocked = false;
 
 	/* Initialize the configuration. */
 	vq->config.num = num_descs;
@@ -1246,6 +1353,24 @@ static void setup_console(void)
 }
 /*:*/
 
+static void timeout_alarm(int sig)
+{
+	write(timeoutpipe[1], "", 1);
+}
+
+static void setup_timeout(void)
+{
+	if (pipe(timeoutpipe) != 0)
+		err(1, "Creating timeout pipe");
+
+	if (fcntl(timeoutpipe[1], F_SETFL,
+		  fcntl(timeoutpipe[1], F_GETFL) | O_NONBLOCK) != 0)
+		err(1, "Making timeout pipe nonblocking");
+
+	add_device_fd(timeoutpipe[0]);
+	signal(SIGALRM, timeout_alarm);
+}
+
 /*M:010 Inter-guest networking is an interesting area.  Simplest is to have a
  * --sharenet=<name> option which opens or creates a named pipe.  This can be
  * used to send packets to another guest in a 1:1 manner.
@@ -1264,10 +1389,25 @@ static void setup_console(void)
 
 static u32 str2ip(const char *ipaddr)
 {
-	unsigned int byte[4];
+	unsigned int b[4];
+
+	if (sscanf(ipaddr, "%u.%u.%u.%u", &b[0], &b[1], &b[2], &b[3]) != 4)
+		errx(1, "Failed to parse IP address '%s'", ipaddr);
+	return (b[0] << 24) | (b[1] << 16) | (b[2] << 8) | b[3];
+}
 
-	sscanf(ipaddr, "%u.%u.%u.%u", &byte[0], &byte[1], &byte[2], &byte[3]);
-	return (byte[0] << 24) | (byte[1] << 16) | (byte[2] << 8) | byte[3];
+static void str2mac(const char *macaddr, unsigned char mac[6])
+{
+	unsigned int m[6];
+	if (sscanf(macaddr, "%02x:%02x:%02x:%02x:%02x:%02x",
+		   &m[0], &m[1], &m[2], &m[3], &m[4], &m[5]) != 6)
+		errx(1, "Failed to parse mac address '%s'", macaddr);
+	mac[0] = m[0];
+	mac[1] = m[1];
+	mac[2] = m[2];
+	mac[3] = m[3];
+	mac[4] = m[4];
+	mac[5] = m[5];
 }
 
 /* This code is "adapted" from libbridge: it attaches the Host end of the
@@ -1288,6 +1428,7 @@ static void add_to_bridge(int fd, const char *if_name, const char *br_name)
 		errx(1, "interface %s does not exist!", if_name);
 
 	strncpy(ifr.ifr_name, br_name, IFNAMSIZ);
+	ifr.ifr_name[IFNAMSIZ-1] = '\0';
 	ifr.ifr_ifindex = ifidx;
 	if (ioctl(fd, SIOCBRADDIF, &ifr) < 0)
 		err(1, "can't add %s to bridge %s", if_name, br_name);
@@ -1296,64 +1437,75 @@ static void add_to_bridge(int fd, const char *if_name, const char *br_name)
 /* This sets up the Host end of the network device with an IP address, brings
  * it up so packets will flow, the copies the MAC address into the hwaddr
  * pointer. */
-static void configure_device(int fd, const char *devname, u32 ipaddr,
-			     unsigned char hwaddr[6])
+static void configure_device(int fd, const char *tapif, u32 ipaddr)
 {
 	struct ifreq ifr;
 	struct sockaddr_in *sin = (struct sockaddr_in *)&ifr.ifr_addr;
 
-	/* Don't read these incantations.  Just cut & paste them like I did! */
 	memset(&ifr, 0, sizeof(ifr));
-	strcpy(ifr.ifr_name, devname);
+	strcpy(ifr.ifr_name, tapif);
+
+	/* Don't read these incantations.  Just cut & paste them like I did! */
 	sin->sin_family = AF_INET;
 	sin->sin_addr.s_addr = htonl(ipaddr);
 	if (ioctl(fd, SIOCSIFADDR, &ifr) != 0)
-		err(1, "Setting %s interface address", devname);
+		err(1, "Setting %s interface address", tapif);
 	ifr.ifr_flags = IFF_UP;
 	if (ioctl(fd, SIOCSIFFLAGS, &ifr) != 0)
-		err(1, "Bringing interface %s up", devname);
-
-	/* SIOC stands for Socket I/O Control.  G means Get (vs S for Set
-	 * above).  IF means Interface, and HWADDR is hardware address.
-	 * Simple! */
-	if (ioctl(fd, SIOCGIFHWADDR, &ifr) != 0)
-		err(1, "getting hw address for %s", devname);
-	memcpy(hwaddr, ifr.ifr_hwaddr.sa_data, 6);
+		err(1, "Bringing interface %s up", tapif);
 }
 
-/*L:195 Our network is a Host<->Guest network.  This can either use bridging or
- * routing, but the principle is the same: it uses the "tun" device to inject
- * packets into the Host as if they came in from a normal network card.  We
- * just shunt packets between the Guest and the tun device. */
-static void setup_tun_net(const char *arg)
+static int get_tun_device(char tapif[IFNAMSIZ])
 {
-	struct device *dev;
 	struct ifreq ifr;
-	int netfd, ipfd;
-	u32 ip;
-	const char *br_name = NULL;
-	struct virtio_net_config conf;
+	int netfd;
+
+	/* Start with this zeroed.  Messy but sure. */
+	memset(&ifr, 0, sizeof(ifr));
 
 	/* We open the /dev/net/tun device and tell it we want a tap device.  A
 	 * tap device is like a tun device, only somehow different.  To tell
 	 * the truth, I completely blundered my way through this code, but it
 	 * works now! */
 	netfd = open_or_die("/dev/net/tun", O_RDWR);
-	memset(&ifr, 0, sizeof(ifr));
-	ifr.ifr_flags = IFF_TAP | IFF_NO_PI;
+	ifr.ifr_flags = IFF_TAP | IFF_NO_PI | IFF_VNET_HDR;
 	strcpy(ifr.ifr_name, "tap%d");
 	if (ioctl(netfd, TUNSETIFF, &ifr) != 0)
 		err(1, "configuring /dev/net/tun");
+
+	if (ioctl(netfd, TUNSETOFFLOAD,
+		  TUN_F_CSUM|TUN_F_TSO4|TUN_F_TSO6|TUN_F_TSO_ECN) != 0)
+		err(1, "Could not set features for tun device");
+
 	/* We don't need checksums calculated for packets coming in this
 	 * device: trust us! */
 	ioctl(netfd, TUNSETNOCSUM, 1);
 
+	memcpy(tapif, ifr.ifr_name, IFNAMSIZ);
+	return netfd;
+}
+
+/*L:195 Our network is a Host<->Guest network.  This can either use bridging or
+ * routing, but the principle is the same: it uses the "tun" device to inject
+ * packets into the Host as if they came in from a normal network card.  We
+ * just shunt packets between the Guest and the tun device. */
+static void setup_tun_net(char *arg)
+{
+	struct device *dev;
+	int netfd, ipfd;
+	u32 ip = INADDR_ANY;
+	bool bridging = false;
+	char tapif[IFNAMSIZ], *p;
+	struct virtio_net_config conf;
+
+	netfd = get_tun_device(tapif);
+
 	/* First we create a new network device. */
 	dev = new_device("net", VIRTIO_ID_NET, netfd, handle_tun_input);
 
 	/* Network devices need a receive and a send queue, just like
 	 * console. */
-	add_virtqueue(dev, VIRTQUEUE_NUM, enable_fd);
+	add_virtqueue(dev, VIRTQUEUE_NUM, net_enable_fd);
 	add_virtqueue(dev, VIRTQUEUE_NUM, handle_net_output);
 
 	/* We need a socket to perform the magic network ioctls to bring up the
@@ -1364,28 +1516,50 @@ static void setup_tun_net(const char *arg)
 
 	/* If the command line was --tunnet=bridge:<name> do bridging. */
 	if (!strncmp(BRIDGE_PFX, arg, strlen(BRIDGE_PFX))) {
-		ip = INADDR_ANY;
-		br_name = arg + strlen(BRIDGE_PFX);
-		add_to_bridge(ipfd, ifr.ifr_name, br_name);
-	} else /* It is an IP address to set up the device with */
+		arg += strlen(BRIDGE_PFX);
+		bridging = true;
+	}
+
+	/* A mac address may follow the bridge name or IP address */
+	p = strchr(arg, ':');
+	if (p) {
+		str2mac(p+1, conf.mac);
+		add_feature(dev, VIRTIO_NET_F_MAC);
+		*p = '\0';
+	}
+
+	/* arg is now either an IP address or a bridge name */
+	if (bridging)
+		add_to_bridge(ipfd, tapif, arg);
+	else
 		ip = str2ip(arg);
 
-	/* Set up the tun device, and get the mac address for the interface. */
-	configure_device(ipfd, ifr.ifr_name, ip, conf.mac);
+	/* Set up the tun device. */
+	configure_device(ipfd, tapif, ip);
 
-	/* Tell Guest what MAC address to use. */
-	add_feature(dev, VIRTIO_NET_F_MAC);
 	add_feature(dev, VIRTIO_F_NOTIFY_ON_EMPTY);
+	/* Expect Guest to handle everything except UFO */
+	add_feature(dev, VIRTIO_NET_F_CSUM);
+	add_feature(dev, VIRTIO_NET_F_GUEST_CSUM);
+	add_feature(dev, VIRTIO_NET_F_GUEST_TSO4);
+	add_feature(dev, VIRTIO_NET_F_GUEST_TSO6);
+	add_feature(dev, VIRTIO_NET_F_GUEST_ECN);
+	add_feature(dev, VIRTIO_NET_F_HOST_TSO4);
+	add_feature(dev, VIRTIO_NET_F_HOST_TSO6);
+	add_feature(dev, VIRTIO_NET_F_HOST_ECN);
 	set_config(dev, sizeof(conf), &conf);
 
 	/* We don't need the socket any more; setup is done. */
 	close(ipfd);
 
-	verbose("device %u: tun net %u.%u.%u.%u\n",
-		devices.device_num++,
-		(u8)(ip>>24),(u8)(ip>>16),(u8)(ip>>8),(u8)ip);
-	if (br_name)
-		verbose("attached to bridge: %s\n", br_name);
+	devices.device_num++;
+
+	if (bridging)
+		verbose("device %u: tun %s attached to bridge: %s\n",
+			devices.device_num, tapif, arg);
+	else
+		verbose("device %u: tun %s: %s\n",
+			devices.device_num, tapif, arg);
 }
 
 /* Our block (disk) device should be really simple: the Guest asks for a block
@@ -1550,7 +1724,7 @@ static bool handle_io_finish(int fd, struct device *dev)
 }
 
 /* When the Guest submits some I/O, we just need to wake the I/O thread. */
-static void handle_virtblk_output(int fd, struct virtqueue *vq)
+static void handle_virtblk_output(int fd, struct virtqueue *vq, bool timeout)
 {
 	struct vblk_info *vblk = vq->dev->priv;
 	char c = 0;
@@ -1621,6 +1795,64 @@ static void setup_block_file(const char *filename)
 	verbose("device %u: virtblock %llu sectors\n",
 		devices.device_num, le64_to_cpu(conf.capacity));
 }
+
+/* Our random number generator device reads from /dev/random into the Guest's
+ * input buffers.  The usual case is that the Guest doesn't want random numbers
+ * and so has no buffers although /dev/random is still readable, whereas
+ * console is the reverse.
+ *
+ * The same logic applies, however. */
+static bool handle_rng_input(int fd, struct device *dev)
+{
+	int len;
+	unsigned int head, in_num, out_num, totlen = 0;
+	struct iovec iov[dev->vq->vring.num];
+
+	/* First we need a buffer from the Guests's virtqueue. */
+	head = get_vq_desc(dev->vq, iov, &out_num, &in_num);
+
+	/* If they're not ready for input, stop listening to this file
+	 * descriptor.  We'll start again once they add an input buffer. */
+	if (head == dev->vq->vring.num)
+		return false;
+
+	if (out_num)
+		errx(1, "Output buffers in rng?");
+
+	/* This is why we convert to iovecs: the readv() call uses them, and so
+	 * it reads straight into the Guest's buffer.  We loop to make sure we
+	 * fill it. */
+	while (!iov_empty(iov, in_num)) {
+		len = readv(dev->fd, iov, in_num);
+		if (len <= 0)
+			err(1, "Read from /dev/random gave %i", len);
+		iov_consume(iov, in_num, len);
+		totlen += len;
+	}
+
+	/* Tell the Guest about the new input. */
+	add_used_and_trigger(fd, dev->vq, head, totlen);
+
+	/* Everything went OK! */
+	return true;
+}
+
+/* And this creates a "hardware" random number device for the Guest. */
+static void setup_rng(void)
+{
+	struct device *dev;
+	int fd;
+
+	fd = open_or_die("/dev/random", O_RDONLY);
+
+	/* The device responds to return from I/O thread. */
+	dev = new_device("rng", VIRTIO_ID_RNG, fd, handle_rng_input);
+
+	/* The device has one virtqueue, where the Guest places inbufs. */
+	add_virtqueue(dev, VIRTQUEUE_NUM, enable_fd);
+
+	verbose("device %u: rng\n", devices.device_num++);
+}
 /* That's the end of device setup. */
 
 /*L:230 Reboot is pretty easy: clean up and exec() the Launcher afresh. */
@@ -1628,11 +1860,12 @@ static void __attribute__((noreturn)) restart_guest(void)
 {
 	unsigned int i;
 
-	/* Closing pipes causes the Waker thread and io_threads to die, and
-	 * closing /dev/lguest cleans up the Guest.  Since we don't track all
-	 * open fds, we simply close everything beyond stderr. */
+	/* Since we don't track all open fds, we simply close everything beyond
+	 * stderr. */
 	for (i = 3; i < FD_SETSIZE; i++)
 		close(i);
+
+	/* The exec automatically gets rid of the I/O and Waker threads. */
 	execv(main_args[0], main_args);
 	err(1, "Could not exec %s", main_args[0]);
 }
@@ -1663,7 +1896,7 @@ static void __attribute__((noreturn)) run_guest(int lguest_fd)
 		/* ERESTART means that we need to reboot the guest */
 		} else if (errno == ERESTART) {
 			restart_guest();
-		/* EAGAIN means the Waker wanted us to look at some input.
+		/* EAGAIN means a signal (timeout).
 		 * Anything else means a bug or incompatible change. */
 		} else if (errno != EAGAIN)
 			err(1, "Running guest failed");
@@ -1691,13 +1924,14 @@ static struct option opts[] = {
 	{ "verbose", 0, NULL, 'v' },
 	{ "tunnet", 1, NULL, 't' },
 	{ "block", 1, NULL, 'b' },
+	{ "rng", 0, NULL, 'r' },
 	{ "initrd", 1, NULL, 'i' },
 	{ NULL },
 };
 static void usage(void)
 {
 	errx(1, "Usage: lguest [--verbose] "
-	     "[--tunnet=(<ipaddr>|bridge:<bridgename>)\n"
+	     "[--tunnet=(<ipaddr>:<macaddr>|bridge:<bridgename>:<macaddr>)\n"
 	     "|--block=<filename>|--initrd=<filename>]...\n"
 	     "<mem-in-mb> vmlinux [args...]");
 }
@@ -1765,6 +1999,9 @@ int main(int argc, char *argv[])
 		case 'b':
 			setup_block_file(optarg);
 			break;
+		case 'r':
+			setup_rng();
+			break;
 		case 'i':
 			initrd_name = optarg;
 			break;
@@ -1783,6 +2020,9 @@ int main(int argc, char *argv[])
 	/* We always have a console device */
 	setup_console();
 
+	/* We can timeout waiting for Guest network transmit. */
+	setup_timeout();
+
 	/* Now we load the kernel */
 	start = load_kernel(open_or_die(argv[optind+1], O_RDONLY));
 
@@ -1826,10 +2066,10 @@ int main(int argc, char *argv[])
 	 * /dev/lguest file descriptor. */
 	lguest_fd = tell_kernel(pgdir, start);
 
-	/* We fork off a child process, which wakes the Launcher whenever one
-	 * of the input file descriptors needs attention.  We call this the
-	 * Waker, and we'll cover it in a moment. */
-	waker_fd = setup_waker(lguest_fd);
+	/* We clone off a thread, which wakes the Launcher whenever one of the
+	 * input file descriptors needs attention.  We call this the Waker, and
+	 * we'll cover it in a moment. */
+	setup_waker(lguest_fd);
 
 	/* Finally, run the Guest.  This doesn't return. */
 	run_guest(lguest_fd);
diff --git a/Documentation/local_ops.txt b/Documentation/local_ops.txt
index 4269a1105b37..f4f8b1c6c8ba 100644
--- a/Documentation/local_ops.txt
+++ b/Documentation/local_ops.txt
@@ -36,7 +36,7 @@ It can be done by slightly modifying the standard atomic operations : only
 their UP variant must be kept. It typically means removing LOCK prefix (on
 i386 and x86_64) and any SMP sychronization barrier. If the architecture does
 not have a different behavior between SMP and UP, including asm-generic/local.h
-in your archtecture's local.h is sufficient.
+in your architecture's local.h is sufficient.
 
 The local_t type is defined as an opaque signed long by embedding an
 atomic_long_t inside a structure. This is made so a cast from this type to a
diff --git a/Documentation/moxa-smartio b/Documentation/moxa-smartio
index fe24ecc6372e..5337e80a5b96 100644
--- a/Documentation/moxa-smartio
+++ b/Documentation/moxa-smartio
@@ -1,14 +1,22 @@
 =============================================================================
-
-	MOXA Smartio Family Device Driver Ver 1.1 Installation Guide
-		    for Linux Kernel 2.2.x and 2.0.3x
-	       Copyright (C) 1999, Moxa Technologies Co, Ltd.
+          MOXA Smartio/Industio Family Device Driver Installation Guide
+		    for Linux Kernel 2.4.x, 2.6.x
+	       Copyright (C) 2008, Moxa Inc.
 =============================================================================
+Date: 01/21/2008
+
 Content
 
 1. Introduction
 2. System Requirement
 3. Installation
+   3.1 Hardware installation
+   3.2 Driver files
+   3.3 Device naming convention
+   3.4 Module driver configuration
+   3.5 Static driver configuration for Linux kernel 2.4.x and 2.6.x.
+   3.6 Custom configuration
+   3.7 Verify driver installation
 4. Utilities
 5. Setserial
 6. Troubleshooting
@@ -16,27 +24,48 @@ Content
 -----------------------------------------------------------------------------
 1. Introduction
 
-   The Smartio family Linux driver, Ver. 1.1, supports following multiport
+   The Smartio/Industio/UPCI family Linux driver supports following multiport
    boards.
 
-    -C104P/H/HS, C104H/PCI, C104HS/PCI, CI-104J 4 port multiport board.
-    -C168P/H/HS, C168H/PCI 8 port multiport board.
-
-   This driver has been modified a little and cleaned up from the Moxa
-   contributed driver code and merged into Linux 2.2.14pre. In particular
-   official major/minor numbers have been assigned which are different to
-   those the original Moxa supplied driver used.
+    - 2 ports multiport board
+	CP-102U, CP-102UL, CP-102UF
+	CP-132U-I, CP-132UL,
+	CP-132, CP-132I, CP132S, CP-132IS,
+	CI-132, CI-132I, CI-132IS,
+	(C102H, C102HI, C102HIS, C102P, CP-102, CP-102S)
+
+    - 4 ports multiport board
+	CP-104EL,
+	CP-104UL, CP-104JU,
+	CP-134U, CP-134U-I,
+	C104H/PCI, C104HS/PCI,
+	CP-114, CP-114I, CP-114S, CP-114IS, CP-114UL,
+	C104H, C104HS,
+	CI-104J, CI-104JS,
+	CI-134, CI-134I, CI-134IS,
+	(C114HI, CT-114I, C104P)
+	POS-104UL,
+	CB-114,
+	CB-134I
+
+    - 8 ports multiport board
+	CP-118EL, CP-168EL,
+	CP-118U, CP-168U,
+	C168H/PCI,
+	C168H, C168HS,
+	(C168P),
+	CB-108
 
    This driver and installation procedure have been developed upon Linux Kernel
-   2.2.5 and backward compatible to 2.0.3x. This driver supports Intel x86 and
-   Alpha hardware platform. In order to maintain compatibility, this version
-   has also been properly tested with RedHat, OpenLinux, TurboLinux and
-   S.u.S.E Linux. However, if compatibility problem occurs, please contact
-   Moxa at support@moxa.com.tw.
+   2.4.x and 2.6.x. This driver supports Intel x86 hardware platform. In order
+   to maintain compatibility, this version has also been properly tested with
+   RedHat, Mandrake, Fedora and S.u.S.E Linux. However, if compatibility problem
+   occurs, please contact Moxa at support@moxa.com.tw.
 
    In addition to device driver, useful utilities are also provided in this
    version. They are
-    - msdiag     Diagnostic program for detecting installed Moxa Smartio boards.
+    - msdiag     Diagnostic program for displaying installed Moxa
+                 Smartio/Industio boards.
     - msmon      Monitor program to observe data count and line status signals.
     - msterm     A simple terminal program which is useful in testing serial
 	         ports.
@@ -47,8 +76,7 @@ Content
    GNU General Public License in this version. Please refer to GNU General
    Public License announcement in each source code file for more detail.
 
-   In Moxa's ftp sites, you may always find latest driver at
-   ftp://ftp.moxa.com  or ftp://ftp.moxa.com.tw.
+   In Moxa's Web sites, you may always find latest driver at http://web.moxa.com.
 
    This version of driver can be installed as Loadable Module (Module driver)
    or built-in into kernel (Static driver). You may refer to following
@@ -61,8 +89,8 @@ Content
 
 -----------------------------------------------------------------------------
 2. System Requirement
-   - Hardware platform: Intel x86 or Alpha machine
-   - Kernel version: 2.0.3x or 2.2.x
+   - Hardware platform: Intel x86 machine
+   - Kernel version: 2.4.x or 2.6.x
    - gcc version 2.72 or later
    - Maximum 4 boards can be installed in combination
 
@@ -70,9 +98,18 @@ Content
 3. Installation
 
    3.1 Hardware installation
+   3.2 Driver files
+   3.3 Device naming convention
+   3.4 Module driver configuration
+   3.5 Static driver configuration for Linux kernel 2.4.x, 2.6.x.
+   3.6 Custom configuration
+   3.7 Verify driver installation
+
+
+   3.1 Hardware installation
 
-       There are two types of buses, ISA and PCI, for Smartio family multiport
-       board.
+       There are two types of buses, ISA and PCI, for Smartio/Industio
+       family multiport board.
 
        ISA board
        ---------
@@ -81,47 +118,57 @@ Content
        installation procedure in User's Manual before proceed any further.
        Please make sure the JP1 is open after the ISA board is set properly.
 
-       PCI board
-       ---------
+       PCI/UPCI board
+       --------------
        You may need to adjust IRQ usage in BIOS to avoid from IRQ conflict
        with other ISA devices. Please refer to hardware installation
        procedure in User's Manual in advance.
 
-       IRQ Sharing
+       PCI IRQ Sharing
        -----------
        Each port within the same multiport board shares the same IRQ. Up to
-       4 Moxa Smartio Family multiport boards can be installed together on
-       one system and they can share the same IRQ.
+       4 Moxa Smartio/Industio PCI Family multiport boards can be installed
+       together on one system and they can share the same IRQ.
+
 
-   3.2 Driver files and device naming convention
+   3.2 Driver files
 
        The driver file may be obtained from ftp, CD-ROM or floppy disk. The
        first step, anyway, is to copy driver file "mxser.tgz" into specified
        directory. e.g. /moxa. The execute commands as below.
 
+       # cd /
+       # mkdir moxa
        # cd /moxa
-       # tar xvf /dev/fd0 
+       # tar xvf /dev/fd0
+
        or
+
+       # cd /
+       # mkdir moxa
        # cd /moxa
        # cp /mnt/cdrom/<driver directory>/mxser.tgz .
        # tar xvfz mxser.tgz
 
+
+   3.3 Device naming convention
+
        You may find all the driver and utilities files in /moxa/mxser.
        Following installation procedure depends on the model you'd like to
-       run the driver. If you prefer module driver, please refer to 3.3.
-       If static driver is required, please refer to 3.4.
+       run the driver. If you prefer module driver, please refer to 3.4.
+       If static driver is required, please refer to 3.5.
 
        Dialin and callout port
        -----------------------
-       This driver remains traditional serial device properties. There're
+       This driver remains traditional serial device properties. There are
        two special file name for each serial port. One is dial-in port
        which is named "ttyMxx". For callout port, the naming convention
        is "cumxx".
 
        Device naming when more than 2 boards installed
        -----------------------------------------------
-       Naming convention for each Smartio multiport board is pre-defined
-       as below.
+       Naming convention for each Smartio/Industio multiport board is
+       pre-defined as below.
 
        Board Num.	 Dial-in Port	      Callout port
        1st board	ttyM0  - ttyM7	      cum0  - cum7
@@ -129,6 +176,12 @@ Content
        3rd board	ttyM16 - ttyM23       cum16 - cum23
        4th board	ttyM24 - ttym31       cum24 - cum31
 
+
+       !!!!!!!!!!!!!!!!!!!! NOTE !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
+       Under Kernel 2.6 the cum Device is Obsolete. So use ttyM*
+       device instead.
+       !!!!!!!!!!!!!!!!!!!! NOTE !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
+
        Board sequence
        --------------
        This driver will activate ISA boards according to the parameter set
@@ -138,69 +191,131 @@ Content
        For PCI boards, their sequence will be after ISA boards and C168H/PCI
        has higher priority than C104H/PCI boards.
 
-   3.3 Module driver configuration
+   3.4 Module driver configuration
        Module driver is easiest way to install. If you prefer static driver
        installation, please skip this paragraph.
-       1. Find "Makefile" in /moxa/mxser, then run
 
-	  # make install
+
+       ------------- Prepare to use the MOXA driver--------------------
+       3.4.1 Create tty device with correct major number
+          Before using MOXA driver, your system must have the tty devices
+          which are created with driver's major number. We offer one shell
+          script "msmknod" to simplify the procedure.
+          This step is only needed to be executed once. But you still
+          need to do this procedure when:
+          a. You change the driver's major number. Please refer the "3.7"
+             section.
+          b. Your total installed MOXA boards number is changed. Maybe you
+             add/delete one MOXA board.
+          c. You want to change the tty name. This needs to modify the
+             shell script "msmknod"
+
+          The procedure is:
+	  # cd /moxa/mxser/driver
+	  # ./msmknod
+
+          This shell script will require the major number for dial-in
+          device and callout device to create tty device. You also need
+          to specify the total installed MOXA board number. Default major
+          numbers for dial-in device and callout device are 30, 35. If
+          you need to change to other number, please refer section "3.7"
+          for more detailed procedure.
+          Msmknod will delete any special files occupying the same device
+          naming.
+
+       3.4.2 Build the MOXA driver and utilities
+          Before using the MOXA driver and utilities, you need compile the
+          all the source code. This step is only need to be executed once.
+          But you still re-compile the source code if you modify the source
+          code. For example, if you change the driver's major number (see
+          "3.7" section), then you need to do this step again.
+
+          Find "Makefile" in /moxa/mxser, then run
+
+	  # make clean; make install
+
+          !!!!!!!!!! NOTE !!!!!!!!!!!!!!!!!
+	  For Red Hat 9, Red Hat Enterprise Linux AS3/ES3/WS3 & Fedora Core1:
+	  # make clean; make installsp1
+
+	  For Red Hat Enterprise Linux AS4/ES4/WS4:
+	  # make clean; make installsp2
+          !!!!!!!!!! NOTE !!!!!!!!!!!!!!!!!
 
 	  The driver files "mxser.o" and utilities will be properly compiled
-	  and copied to system directories respectively.Then run
+	  and copied to system directories respectively.
 
-	  # insmod mxser
+       ------------- Load MOXA driver--------------------
+       3.4.3 Load the MOXA driver
 
-	  to activate the modular driver. You may run "lsmod" to check
-	  if "mxser.o" is activated.
+	  # modprobe mxser <argument>
 
-       2. Create special files by executing "msmknod".
-	  # cd /moxa/mxser/driver
-	  # ./msmknod
+	  will activate the module driver. You may run "lsmod" to check
+	  if "mxser" is activated. If the MOXA board is ISA board, the
+          <argument> is needed. Please refer to section "3.4.5" for more
+          information.
+
+
+       ------------- Load MOXA driver on boot --------------------
+       3.4.4 For the above description, you may manually execute
+          "modprobe mxser" to activate this driver and run
+	  "rmmod mxser" to remove it.
+          However, it's better to have a boot time configuration to
+          eliminate manual operation. Boot time configuration can be
+          achieved by rc file. We offer one "rc.mxser" file to simplify
+          the procedure under "moxa/mxser/driver".
 
-	  Default major numbers for dial-in device and callout device are
-	  174, 175. Msmknod will delete any special files occupying the same
-	  device naming.
+          But if you use ISA board, please modify the "modprobe ..." command
+          to add the argument (see "3.4.5" section). After modifying the
+          rc.mxser, please try to execute "/moxa/mxser/driver/rc.mxser"
+          manually to make sure the modification is ok. If any error
+          encountered, please try to modify again. If the modification is
+          completed, follow the below step.
 
-       3. Up to now, you may manually execute "insmod mxser" to activate
-	  this driver and run "rmmod mxser" to remove it. However, it's
-	  better to have a boot time configuration to eliminate manual
-	  operation.
-	  Boot time configuration can be achieved by rc file. Run following
-	  command for setting rc files.
+	  Run following command for setting rc files.
 
 	  # cd /moxa/mxser/driver
 	  # cp ./rc.mxser /etc/rc.d
 	  # cd /etc/rc.d
 
-	  You may have to modify part of the content in rc.mxser to specify
-          parameters for ISA board. Please refer to rc.mxser for more detail.
-          Find "rc.serial". If "rc.serial" doesn't exist, create it by vi.
-	  Add "rc.mxser" in last line. Next, open rc.local by vi
-	  and append following content.
+	  Check "rc.serial" is existed or not. If "rc.serial" doesn't exist,
+	  create it by vi, run "chmod 755 rc.serial" to change the permission.
+	  Add "/etc/rc.d/rc.mxser" in last line,
 
-	  if [ -f /etc/rc.d/rc.serial ]; then
-	     sh /etc/rc.d/rc.serial
-	  fi
+          Reboot and check if moxa.o activated by "lsmod" command.
 
-       4. Reboot and check if mxser.o activated by "lsmod" command.
-       5. If you'd like to drive Smartio ISA boards in the system, you'll
-	  have to add parameter to specify CAP address of given board while
-          activating "mxser.o". The format for parameters are as follows.
+       3.4.5. If you'd like to drive Smartio/Industio ISA boards in the system,
+          you'll have to add parameter to specify CAP address of given
+	  board while activating "mxser.o". The format for parameters are
+	  as follows.
 
-	  insmod mxser ioaddr=0x???,0x???,0x???,0x???
+	  modprobe mxser ioaddr=0x???,0x???,0x???,0x???
 				|      |     |	  |
 				|      |     |	  +- 4th ISA board
 				|      |     +------ 3rd ISA board
 				|      +------------ 2nd ISA board
 				+------------------- 1st ISA board
 
-   3.4 Static driver configuration
+   3.5 Static driver configuration for Linux kernel 2.4.x and 2.6.x
+
+       Note: To use static driver, you must install the linux kernel
+             source package.
+
+       3.5.1 Backup the built-in driver in the kernel.
+          # cd /usr/src/linux/drivers/char
+          # mv mxser.c mxser.c.old
+
+          For Red Hat 7.x user, you need to create link:
+          # cd /usr/src
+          # ln -s linux-2.4 linux
 
-       1. Create link
+       3.5.2 Create link
 	  # cd /usr/src/linux/drivers/char
 	  # ln -s /moxa/mxser/driver/mxser.c mxser.c
 
-       2. Add CAP address list for ISA boards
+       3.5.3 Add CAP address list for ISA boards. For PCI boards user,
+          please skip this step.
+
 	  In module mode, the CAP address for ISA board is given by
 	  parameter. In static driver configuration, you'll have to
 	  assign it within driver's source code. If you will not
@@ -222,73 +337,55 @@ Content
 	     static int mxserBoardCAP[]
 	     = {0x280, 0x180, 0x00, 0x00};
 
-       3. Modify tty_io.c
-	  # cd /usr/src/linux/drivers/char/
-	  # vi tty_io.c
-	    Find pty_init(), insert "mxser_init()" as
+       3.5.4 Setup kernel configuration
 
-	    pty_init();
-	    mxser_init();
+          Configure the kernel:
 
-       4. Modify tty.h
-	  # cd /usr/src/linux/include/linux
-	  # vi tty.h
-	    Find extern int tty_init(void), insert "mxser_init()" as
+            # cd /usr/src/linux
+            # make menuconfig
 
-	    extern int tty_init(void);
-	    extern int mxser_init(void);
-     
-       5. Modify Makefile
-	  # cd /usr/src/linux/drivers/char
-	  # vi Makefile
-	    Find L_OBJS := tty_io.o ...... random.o, add
-	    "mxser.o" at last of this line as
-	    L_OBJS := tty_io.o ....... mxser.o
+          You will go into a menu-driven system. Please select [Character
+          devices][Non-standard serial port support], enable the [Moxa
+          SmartIO support] driver with "[*]" for built-in (not "[M]"), then
+          select [Exit] to exit this program.
 
-       6. Rebuild kernel
-	  The following are for Linux kernel rebuilding,for your reference only.
+       3.5.5 Rebuild kernel
+	  The following are for Linux kernel rebuilding, for your
+          reference only.
 	  For appropriate details, please refer to the Linux document.
 
-	  If 'lilo' utility is installed, please use 'make zlilo' to rebuild
-	  kernel. If 'lilo' is not installed, please follow the following steps.
-
 	   a. cd /usr/src/linux
-	   b. make clean			     /* take a few minutes */
-	   c. make bzImage		   /* take probably 10-20 minutes */
-	   d. Backup original boot kernel.		  /* optional step */
-	   e. cp /usr/src/linux/arch/i386/boot/bzImage /boot/vmlinuz
+	   b. make clean	     /* take a few minutes */
+	   c. make dep		     /* take a few minutes */
+	   d. make bzImage	     /* take probably 10-20 minutes */
+	   e. make install	     /* copy boot image to correct position */
 	   f. Please make sure the boot kernel (vmlinuz) is in the
-	      correct position. If you use 'lilo' utility, you should
-	      check /etc/lilo.conf 'image' item specified the path
-	      which is the 'vmlinuz' path, or you will load wrong
-	      (or old) boot kernel image (vmlinuz).
-	   g. chmod 400 /vmlinuz
-	   h. lilo
-	   i. rdev -R /vmlinuz 1
-	   j. sync
-
-	  Note that if the result of "make zImage" is ERROR, then you have to
-	  go back to Linux configuration Setup. Type "make config" in directory
-	  /usr/src/linux or "setup".
-
-	  Since system include file, /usr/src/linux/include/linux/interrupt.h,
-	  is modified each time the MOXA driver is installed, kernel rebuilding
-	  is inevitable. And it takes about 10 to 20 minutes depends on the
-	  machine.
-
-       7. Make utility
-	  # cd /moxa/mxser/utility
-	  # make install
-       
-       8. Make special file
+	      correct position.
+	   g. If you use 'lilo' utility, you should check /etc/lilo.conf
+	      'image' item specified the path which is the 'vmlinuz' path,
+	      or you will load wrong (or old) boot kernel image (vmlinuz).
+	      After checking /etc/lilo.conf, please run "lilo".
+
+	  Note that if the result of "make bzImage" is ERROR, then you have to
+	  go back to Linux configuration Setup. Type "make menuconfig" in
+          directory /usr/src/linux.
+
+
+       3.5.6 Make tty device and special file
           # cd /moxa/mxser/driver
           # ./msmknod
 
-       9. Reboot
+       3.5.7 Make utility
+	  # cd /moxa/mxser/utility
+	  # make clean; make install
+
+       3.5.8 Reboot
 
-   3.5 Custom configuration
+
+
+   3.6 Custom configuration
        Although this driver already provides you default configuration, you
-       still can change the device name and major number.The instruction to
+       still can change the device name and major number. The instruction to
        change these parameters are shown as below.
 
        Change Device name
@@ -306,33 +403,37 @@ Content
        2 free major numbers for this driver. There are 3 steps to change
        major numbers.
 
-       1. Find free major numbers
+       3.6.1 Find free major numbers
 	  In /proc/devices, you may find all the major numbers occupied
 	  in the system. Please select 2 major numbers that are available.
 	  e.g. 40, 45.
-       2. Create special files
+       3.6.2 Create special files
 	  Run /moxa/mxser/driver/msmknod to create special files with
 	  specified major numbers.
-       3. Modify driver with new major number
+       3.6.3 Modify driver with new major number
 	  Run vi to open /moxa/mxser/driver/mxser.c. Locate the line
 	  contains "MXSERMAJOR". Change the content as below.
 	  #define	  MXSERMAJOR		  40
 	  #define	  MXSERCUMAJOR		  45
-       4. Run # make install in /moxa/mxser/driver.
+       3.6.4 Run "make clean; make install" in /moxa/mxser/driver.
 
-   3.6 Verify driver installation
+   3.7 Verify driver installation
        You may refer to /var/log/messages to check the latest status
        log reported by this driver whenever it's activated.
+
 -----------------------------------------------------------------------------
 4. Utilities
    There are 3 utilities contained in this driver. They are msdiag, msmon and
    msterm. These 3 utilities are released in form of source code. They should
    be compiled into executable file and copied into /usr/bin.
 
+   Before using these utilities, please load driver (refer 3.4 & 3.5) and
+   make sure you had run the "msmknod" utility.
+
    msdiag - Diagnostic
    --------------------
-   This utility provides the function to detect what Moxa Smartio multiport
-   board exists in the system.
+   This utility provides the function to display what Moxa Smartio/Industio
+   board found by driver in the system.
 
    msmon - Port Monitoring
    -----------------------
@@ -353,12 +454,13 @@ Content
    application, for example, sending AT command to a modem connected to the
    port or used as a terminal for login purpose. Note that this is only a
    dumb terminal emulation without handling full screen operation.
+
 -----------------------------------------------------------------------------
 5. Setserial
 
    Supported Setserial parameters are listed as below.
 
-   uart 	  set UART type(16450-->disable FIFO, 16550A-->enable FIFO)
+   uart		  set UART type(16450-->disable FIFO, 16550A-->enable FIFO)
    close_delay	  set the amount of time(in 1/100 of a second) that DTR
 		  should be kept low while being closed.
    closing_wait   set the amount of time(in 1/100 of a second) that the
@@ -366,7 +468,13 @@ Content
 		  being closed, before the receiver is disable.
    spd_hi	  Use  57.6kb  when  the application requests 38.4kb.
    spd_vhi	  Use  115.2kb	when  the application requests 38.4kb.
+   spd_shi	  Use  230.4kb	when  the application requests 38.4kb.
+   spd_warp	  Use  460.8kb	when  the application requests 38.4kb.
    spd_normal	  Use  38.4kb  when  the application requests 38.4kb.
+   spd_cust	  Use  the custom divisor to set the speed when  the
+		  application requests 38.4kb.
+   divisor	  This option set the custom divison.
+   baud_base	  This option set the base baud rate.
 
 -----------------------------------------------------------------------------
 6. Troubleshooting
@@ -375,8 +483,9 @@ Content
    possible. If all the possible solutions fail, please contact our technical
    support team to get more help.
 
-   Error msg: More than 4 Moxa Smartio family boards found. Fifth board and
-	      after are ignored.
+
+   Error msg: More than 4 Moxa Smartio/Industio family boards found. Fifth board
+              and after are ignored.
    Solution:
    To avoid this problem, please unplug fifth and after board, because Moxa
    driver supports up to 4 boards.
@@ -384,7 +493,7 @@ Content
    Error msg: Request_irq fail, IRQ(?) may be conflict with another device.
    Solution:
    Other PCI or ISA devices occupy the assigned IRQ. If you are not sure
-   which device causes the situation,please check /proc/interrupts to find
+   which device causes the situation, please check /proc/interrupts to find
    free IRQ and simply change another free IRQ for Moxa board.
 
    Error msg: Board #: C1xx Series(CAP=xxx) interrupt number invalid.
@@ -397,15 +506,18 @@ Content
    Moxa ISA board needs an interrupt vector.Please refer to user's manual
    "Hardware Installation" chapter to set interrupt vector.
 
-   Error msg: Couldn't install MOXA Smartio family driver!
+   Error msg: Couldn't install MOXA Smartio/Industio family driver!
    Solution:
    Load Moxa driver fail, the major number may conflict with other devices.
-   Please refer to previous section 3.5 to change a free major number for
+   Please refer to previous section 3.7 to change a free major number for
    Moxa driver.
 
-   Error msg: Couldn't install MOXA Smartio family callout driver!
+   Error msg: Couldn't install MOXA Smartio/Industio family callout driver!
    Solution:
    Load Moxa callout driver fail, the callout device major number may
-   conflict with other devices. Please refer to previous section 3.5 to
+   conflict with other devices. Please refer to previous section 3.7 to
    change a free callout device major number for Moxa driver.
+
+
 -----------------------------------------------------------------------------
+
diff --git a/Documentation/networking/Makefile b/Documentation/networking/Makefile
new file mode 100644
index 000000000000..6d8af1ac56c4
--- /dev/null
+++ b/Documentation/networking/Makefile
@@ -0,0 +1,8 @@
+# kbuild trick to avoid linker error. Can be omitted if a module is built.
+obj- := dummy.o
+
+# List of programs to build
+hostprogs-y := ifenslave
+
+# Tell kbuild to always build the programs
+always := $(hostprogs-y)
diff --git a/Documentation/networking/bonding.txt b/Documentation/networking/bonding.txt
index 7fa7fe71d7a8..688dfe1e6b70 100644
--- a/Documentation/networking/bonding.txt
+++ b/Documentation/networking/bonding.txt
@@ -631,7 +631,7 @@ xmit_hash_policy
 		in environments where a layer3 gateway device is
 		required to reach most destinations.
 
-		This algorithm is 802.3ad complient.
+		This algorithm is 802.3ad compliant.
 
 	layer3+4
 
diff --git a/Documentation/networking/can.txt b/Documentation/networking/can.txt
index 641d2afacffa..297ba7b1ccaf 100644
--- a/Documentation/networking/can.txt
+++ b/Documentation/networking/can.txt
@@ -186,7 +186,7 @@ solution for a couple of reasons:
 
   The Linux network devices (by default) just can handle the
   transmission and reception of media dependent frames. Due to the
-  arbritration on the CAN bus the transmission of a low prio CAN-ID
+  arbitration on the CAN bus the transmission of a low prio CAN-ID
   may be delayed by the reception of a high prio CAN frame. To
   reflect the correct* traffic on the node the loopback of the sent
   data has to be performed right after a successful transmission. If
@@ -481,7 +481,7 @@ solution for a couple of reasons:
   - stats_timer: To calculate the Socket CAN core statistics
     (e.g. current/maximum frames per second) this 1 second timer is
     invoked at can.ko module start time by default. This timer can be
-    disabled by using stattimer=0 on the module comandline.
+    disabled by using stattimer=0 on the module commandline.
 
   - debug: (removed since SocketCAN SVN r546)
 
diff --git a/Documentation/networking/ifenslave.c b/Documentation/networking/ifenslave.c
index a12059886755..1b96ccda3836 100644
--- a/Documentation/networking/ifenslave.c
+++ b/Documentation/networking/ifenslave.c
@@ -1081,7 +1081,7 @@ static int set_if_addr(char *master_ifname, char *slave_ifname)
 
 		}
 
-		ipaddr = ifr.ifr_addr.sa_data;
+		ipaddr = (unsigned char *)ifr.ifr_addr.sa_data;
 		v_print("Interface '%s': set IP %s to %d.%d.%d.%d\n",
 			slave_ifname, ifra[i].desc,
 			ipaddr[0], ipaddr[1], ipaddr[2], ipaddr[3]);
diff --git a/Documentation/networking/packet_mmap.txt b/Documentation/networking/packet_mmap.txt
index db0cd5169581..07c53d596035 100644
--- a/Documentation/networking/packet_mmap.txt
+++ b/Documentation/networking/packet_mmap.txt
@@ -326,7 +326,7 @@ just one call to mmap is needed:
     mmap(0, size, PROT_READ|PROT_WRITE, MAP_SHARED, fd, 0);
 
 If tp_frame_size is a divisor of tp_block_size frames will be 
-contiguosly spaced by tp_frame_size bytes. If not, each 
+contiguously spaced by tp_frame_size bytes. If not, each
 tp_block_size/tp_frame_size frames there will be a gap between 
 the frames. This is because a frame cannot be spawn across two
 blocks. 
diff --git a/Documentation/networking/tc-actions-env-rules.txt b/Documentation/networking/tc-actions-env-rules.txt
index 01e716d185f4..dcadf6f88e34 100644
--- a/Documentation/networking/tc-actions-env-rules.txt
+++ b/Documentation/networking/tc-actions-env-rules.txt
@@ -4,26 +4,27 @@ The "enviromental" rules for authors of any new tc actions are:
 1) If you stealeth or borroweth any packet thou shalt be branching
 from the righteous path and thou shalt cloneth.
 
-For example if your action queues a packet to be processed later
-or intentionaly branches by redirecting a packet then you need to
+For example if your action queues a packet to be processed later,
+or intentionally branches by redirecting a packet, then you need to
 clone the packet.
+
 There are certain fields in the skb tc_verd that need to be reset so we
-avoid loops etc. A few are generic enough so much so that skb_act_clone()
-resets them for you. So invoke skb_act_clone() rather than skb_clone()
+avoid loops, etc.  A few are generic enough that skb_act_clone()
+resets them for you, so invoke skb_act_clone() rather than skb_clone().
 
 2) If you munge any packet thou shalt call pskb_expand_head in the case
 someone else is referencing the skb. After that you "own" the skb.
 You must also tell us if it is ok to munge the packet (TC_OK2MUNGE),
 this way any action downstream can stomp on the packet.
 
-3) dropping packets you dont own is a nono. You simply return
+3) Dropping packets you don't own is a no-no. You simply return
 TC_ACT_SHOT to the caller and they will drop it.
 
 The "enviromental" rules for callers of actions (qdiscs etc) are:
 
-*) thou art responsible for freeing anything returned as being
+*) Thou art responsible for freeing anything returned as being
 TC_ACT_SHOT/STOLEN/QUEUED. If none of TC_ACT_SHOT/STOLEN/QUEUED is
-returned then all is great and you dont need to do anything.
+returned, then all is great and you don't need to do anything.
 
 Post on netdev if something is unclear.
 
diff --git a/Documentation/pcmcia/Makefile b/Documentation/pcmcia/Makefile
new file mode 100644
index 000000000000..accde871ae77
--- /dev/null
+++ b/Documentation/pcmcia/Makefile
@@ -0,0 +1,10 @@
+# kbuild trick to avoid linker error. Can be omitted if a module is built.
+obj- := dummy.o
+
+# List of programs to build
+hostprogs-y := crc32hash
+
+# Tell kbuild to always build the programs
+always := $(hostprogs-y)
+
+HOSTCFLAGS_crc32hash.o += -I$(objtree)/usr/include
diff --git a/Documentation/pcmcia/crc32hash.c b/Documentation/pcmcia/crc32hash.c
index cbc36d299af8..4210e5abab8a 100644
--- a/Documentation/pcmcia/crc32hash.c
+++ b/Documentation/pcmcia/crc32hash.c
@@ -26,7 +26,7 @@ int main(int argc, char **argv) {
 		printf("no string passed as argument\n");
 		return -1;
 	}
-	result = crc32(argv[1], strlen(argv[1]));
+	result = crc32((unsigned char const *)argv[1], strlen(argv[1]));
 	printf("0x%x\n", result);
 	return 0;
 }
diff --git a/Documentation/power/pm_qos_interface.txt b/Documentation/power/pm_qos_interface.txt
index 49adb1a33514..c40866e8b957 100644
--- a/Documentation/power/pm_qos_interface.txt
+++ b/Documentation/power/pm_qos_interface.txt
@@ -1,4 +1,4 @@
-PM quality of Service interface.
+PM Quality Of Service Interface.
 
 This interface provides a kernel and user mode interface for registering
 performance expectations by drivers, subsystems and user space applications on
@@ -7,6 +7,11 @@ one of the parameters.
 Currently we have {cpu_dma_latency, network_latency, network_throughput} as the
 initial set of pm_qos parameters.
 
+Each parameters have defined units:
+ * latency: usec
+ * timeout: usec
+ * throughput: kbs (kilo bit / sec)
+
 The infrastructure exposes multiple misc device nodes one per implemented
 parameter.  The set of parameters implement is defined by pm_qos_power_init()
 and pm_qos_params.h.  This is done because having the available parameters
diff --git a/Documentation/power/power_supply_class.txt b/Documentation/power/power_supply_class.txt
index a8686e5a6857..c6cd4956047c 100644
--- a/Documentation/power/power_supply_class.txt
+++ b/Documentation/power/power_supply_class.txt
@@ -101,6 +101,10 @@ of charge when battery became full/empty". It also could mean "value of
 charge when battery considered full/empty at given conditions (temperature,
 age)". I.e. these attributes represents real thresholds, not design values.
 
+CHARGE_COUNTER - the current charge counter (in µAh).  This could easily
+be negative; there is no empty or full value.  It is only useful for
+relative, time-based measurements.
+
 ENERGY_FULL, ENERGY_EMPTY - same as above but for energy.
 
 CAPACITY - capacity in percents.
diff --git a/Documentation/power/regulator/consumer.txt b/Documentation/power/regulator/consumer.txt
new file mode 100644
index 000000000000..82b7a43aadba
--- /dev/null
+++ b/Documentation/power/regulator/consumer.txt
@@ -0,0 +1,182 @@
+Regulator Consumer Driver Interface
+===================================
+
+This text describes the regulator interface for consumer device drivers.
+Please see overview.txt for a description of the terms used in this text.
+
+
+1. Consumer Regulator Access (static & dynamic drivers)
+=======================================================
+
+A consumer driver can get access to it's supply regulator by calling :-
+
+regulator = regulator_get(dev, "Vcc");
+
+The consumer passes in it's struct device pointer and power supply ID. The core
+then finds the correct regulator by consulting a machine specific lookup table.
+If the lookup is successful then this call will return a pointer to the struct
+regulator that supplies this consumer.
+
+To release the regulator the consumer driver should call :-
+
+regulator_put(regulator);
+
+Consumers can be supplied by more than one regulator e.g. codec consumer with
+analog and digital supplies :-
+
+digital = regulator_get(dev, "Vcc");  /* digital core */
+analog = regulator_get(dev, "Avdd");  /* analog */
+
+The regulator access functions regulator_get() and regulator_put() will
+usually be called in your device drivers probe() and remove() respectively.
+
+
+2. Regulator Output Enable & Disable (static & dynamic drivers)
+====================================================================
+
+A consumer can enable it's power supply by calling:-
+
+int regulator_enable(regulator);
+
+NOTE: The supply may already be enabled before regulator_enabled() is called.
+This may happen if the consumer shares the regulator or the regulator has been
+previously enabled by bootloader or kernel board initialization code.
+
+A consumer can determine if a regulator is enabled by calling :-
+
+int regulator_is_enabled(regulator);
+
+This will return > zero when the regulator is enabled.
+
+
+A consumer can disable it's supply when no longer needed by calling :-
+
+int regulator_disable(regulator);
+
+NOTE: This may not disable the supply if it's shared with other consumers. The
+regulator will only be disabled when the enabled reference count is zero.
+
+Finally, a regulator can be forcefully disabled in the case of an emergency :-
+
+int regulator_force_disable(regulator);
+
+NOTE: this will immediately and forcefully shutdown the regulator output. All
+consumers will be powered off.
+
+
+3. Regulator Voltage Control & Status (dynamic drivers)
+======================================================
+
+Some consumer drivers need to be able to dynamically change their supply
+voltage to match system operating points. e.g. CPUfreq drivers can scale
+voltage along with frequency to save power, SD drivers may need to select the
+correct card voltage, etc.
+
+Consumers can control their supply voltage by calling :-
+
+int regulator_set_voltage(regulator, min_uV, max_uV);
+
+Where min_uV and max_uV are the minimum and maximum acceptable voltages in
+microvolts.
+
+NOTE: this can be called when the regulator is enabled or disabled. If called
+when enabled, then the voltage changes instantly, otherwise the voltage
+configuration changes and the voltage is physically set when the regulator is
+next enabled.
+
+The regulators configured voltage output can be found by calling :-
+
+int regulator_get_voltage(regulator);
+
+NOTE: get_voltage() will return the configured output voltage whether the
+regulator is enabled or disabled and should NOT be used to determine regulator
+output state. However this can be used in conjunction with is_enabled() to
+determine the regulator physical output voltage.
+
+
+4. Regulator Current Limit Control & Status (dynamic drivers)
+===========================================================
+
+Some consumer drivers need to be able to dynamically change their supply
+current limit to match system operating points. e.g. LCD backlight driver can
+change the current limit to vary the backlight brightness, USB drivers may want
+to set the limit to 500mA when supplying power.
+
+Consumers can control their supply current limit by calling :-
+
+int regulator_set_current_limit(regulator, min_uV, max_uV);
+
+Where min_uA and max_uA are the minimum and maximum acceptable current limit in
+microamps.
+
+NOTE: this can be called when the regulator is enabled or disabled. If called
+when enabled, then the current limit changes instantly, otherwise the current
+limit configuration changes and the current limit is physically set when the
+regulator is next enabled.
+
+A regulators current limit can be found by calling :-
+
+int regulator_get_current_limit(regulator);
+
+NOTE: get_current_limit() will return the current limit whether the regulator
+is enabled or disabled and should not be used to determine regulator current
+load.
+
+
+5. Regulator Operating Mode Control & Status (dynamic drivers)
+=============================================================
+
+Some consumers can further save system power by changing the operating mode of
+their supply regulator to be more efficient when the consumers operating state
+changes. e.g. consumer driver is idle and subsequently draws less current
+
+Regulator operating mode can be changed indirectly or directly.
+
+Indirect operating mode control.
+--------------------------------
+Consumer drivers can request a change in their supply regulator operating mode
+by calling :-
+
+int regulator_set_optimum_mode(struct regulator *regulator, int load_uA);
+
+This will cause the core to recalculate the total load on the regulator (based
+on all it's consumers) and change operating mode (if necessary and permitted)
+to best match the current operating load.
+
+The load_uA value can be determined from the consumers datasheet. e.g.most
+datasheets have tables showing the max current consumed in certain situations.
+
+Most consumers will use indirect operating mode control since they have no
+knowledge of the regulator or whether the regulator is shared with other
+consumers.
+
+Direct operating mode control.
+------------------------------
+Bespoke or tightly coupled drivers may want to directly control regulator
+operating mode depending on their operating point. This can be achieved by
+calling :-
+
+int regulator_set_mode(struct regulator *regulator, unsigned int mode);
+unsigned int regulator_get_mode(struct regulator *regulator);
+
+Direct mode will only be used by consumers that *know* about the regulator and
+are not sharing the regulator with other consumers.
+
+
+6. Regulator Events
+===================
+Regulators can notify consumers of external events. Events could be received by
+consumers under regulator stress or failure conditions.
+
+Consumers can register interest in regulator events by calling :-
+
+int regulator_register_notifier(struct regulator *regulator,
+			      struct notifier_block *nb);
+
+Consumers can uregister interest by calling :-
+
+int regulator_unregister_notifier(struct regulator *regulator,
+				struct notifier_block *nb);
+
+Regulators use the kernel notifier framework to send event to thier interested
+consumers.
diff --git a/Documentation/power/regulator/machine.txt b/Documentation/power/regulator/machine.txt
new file mode 100644
index 000000000000..c9a35665cf70
--- /dev/null
+++ b/Documentation/power/regulator/machine.txt
@@ -0,0 +1,101 @@
+Regulator Machine Driver Interface
+===================================
+
+The regulator machine driver interface is intended for board/machine specific
+initialisation code to configure the regulator subsystem. Typical things that
+machine drivers would do are :-
+
+ 1. Regulator -> Device mapping.
+ 2. Regulator supply configuration.
+ 3. Power Domain constraint setting.
+
+
+
+1. Regulator -> device mapping
+==============================
+Consider the following machine :-
+
+  Regulator-1 -+-> Regulator-2 --> [Consumer A @ 1.8 - 2.0V]
+               |
+               +-> [Consumer B @ 3.3V]
+
+The drivers for consumers A & B must be mapped to the correct regulator in
+order to control their power supply. This mapping can be achieved in machine
+initialisation code by calling :-
+
+int regulator_set_device_supply(const char *regulator, struct device *dev,
+				const char *supply);
+
+and is shown with the following code :-
+
+regulator_set_device_supply("Regulator-1", devB, "Vcc");
+regulator_set_device_supply("Regulator-2", devA, "Vcc");
+
+This maps Regulator-1 to the 'Vcc' supply for Consumer B and maps Regulator-2
+to the 'Vcc' supply for Consumer A.
+
+
+2. Regulator supply configuration.
+==================================
+Consider the following machine (again) :-
+
+  Regulator-1 -+-> Regulator-2 --> [Consumer A @ 1.8 - 2.0V]
+               |
+               +-> [Consumer B @ 3.3V]
+
+Regulator-1 supplies power to Regulator-2. This relationship must be registered
+with the core so that Regulator-1 is also enabled when Consumer A enables it's
+supply (Regulator-2).
+
+This relationship can be register with the core via :-
+
+int regulator_set_supply(const char *regulator, const char *regulator_supply);
+
+In this example we would use the following code :-
+
+regulator_set_supply("Regulator-2", "Regulator-1");
+
+Relationships can be queried by calling :-
+
+const char *regulator_get_supply(const char *regulator);
+
+
+3. Power Domain constraint setting.
+===================================
+Each power domain within a system has physical constraints on voltage and
+current. This must be defined in software so that the power domain is always
+operated within specifications.
+
+Consider the following machine (again) :-
+
+  Regulator-1 -+-> Regulator-2 --> [Consumer A @ 1.8 - 2.0V]
+               |
+               +-> [Consumer B @ 3.3V]
+
+This gives us two regulators and two power domains:
+
+                   Domain 1: Regulator-2, Consumer B.
+                   Domain 2: Consumer A.
+
+Constraints can be registered by calling :-
+
+int regulator_set_platform_constraints(const char *regulator,
+	struct regulation_constraints *constraints);
+
+The example is defined as follows :-
+
+struct regulation_constraints domain_1 = {
+	.min_uV = 3300000,
+	.max_uV = 3300000,
+	.valid_modes_mask = REGULATOR_MODE_NORMAL,
+};
+
+struct regulation_constraints domain_2 = {
+	.min_uV = 1800000,
+	.max_uV = 2000000,
+	.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE,
+	.valid_modes_mask = REGULATOR_MODE_NORMAL,
+};
+
+regulator_set_platform_constraints("Regulator-1", &domain_1);
+regulator_set_platform_constraints("Regulator-2", &domain_2);
diff --git a/Documentation/power/regulator/overview.txt b/Documentation/power/regulator/overview.txt
new file mode 100644
index 000000000000..bdcb332bd7fb
--- /dev/null
+++ b/Documentation/power/regulator/overview.txt
@@ -0,0 +1,171 @@
+Linux voltage and current regulator framework
+=============================================
+
+About
+=====
+
+This framework is designed to provide a standard kernel interface to control
+voltage and current regulators.
+
+The intention is to allow systems to dynamically control regulator power output
+in order to save power and prolong battery life. This applies to both voltage
+regulators (where voltage output is controllable) and current sinks (where
+current limit is controllable).
+
+(C) 2008  Wolfson Microelectronics PLC.
+Author: Liam Girdwood <lg@opensource.wolfsonmicro.com>
+
+
+Nomenclature
+============
+
+Some terms used in this document:-
+
+  o Regulator    - Electronic device that supplies power to other devices.
+                   Most regulators can enable and disable their output whilst
+                   some can control their output voltage and or current.
+
+                   Input Voltage -> Regulator -> Output Voltage
+
+
+  o PMIC         - Power Management IC. An IC that contains numerous regulators
+                   and often contains other susbsystems.
+
+
+  o Consumer     - Electronic device that is supplied power by a regulator.
+                   Consumers can be classified into two types:-
+
+                   Static: consumer does not change it's supply voltage or
+                   current limit. It only needs to enable or disable it's
+                   power supply. It's supply voltage is set by the hardware,
+                   bootloader, firmware or kernel board initialisation code.
+
+                   Dynamic: consumer needs to change it's supply voltage or
+                   current limit to meet operation demands.
+
+
+  o Power Domain - Electronic circuit that is supplied it's input power by the
+                   output power of a regulator, switch or by another power
+                   domain.
+
+                   The supply regulator may be behind a switch(s). i.e.
+
+                   Regulator -+-> Switch-1 -+-> Switch-2 --> [Consumer A]
+                              |             |
+                              |             +-> [Consumer B], [Consumer C]
+                              |
+                              +-> [Consumer D], [Consumer E]
+
+                   That is one regulator and three power domains:
+
+                   Domain 1: Switch-1, Consumers D & E.
+                   Domain 2: Switch-2, Consumers B & C.
+                   Domain 3: Consumer A.
+
+                   and this represents a "supplies" relationship:
+
+                   Domain-1 --> Domain-2 --> Domain-3.
+
+                   A power domain may have regulators that are supplied power
+                   by other regulators. i.e.
+
+                   Regulator-1 -+-> Regulator-2 -+-> [Consumer A]
+                                |
+                                +-> [Consumer B]
+
+                   This gives us two regulators and two power domains:
+
+                   Domain 1: Regulator-2, Consumer B.
+                   Domain 2: Consumer A.
+
+                   and a "supplies" relationship:
+
+                   Domain-1 --> Domain-2
+
+
+  o Constraints  - Constraints are used to define power levels for performance
+                   and hardware protection. Constraints exist at three levels:
+
+                   Regulator Level: This is defined by the regulator hardware
+                   operating parameters and is specified in the regulator
+                   datasheet. i.e.
+
+                     - voltage output is in the range 800mV -> 3500mV.
+                     - regulator current output limit is 20mA @ 5V but is
+                       10mA @ 10V.
+
+                   Power Domain Level: This is defined in software by kernel
+                   level board initialisation code. It is used to constrain a
+                   power domain to a particular power range. i.e.
+
+                     - Domain-1 voltage is 3300mV
+                     - Domain-2 voltage is 1400mV -> 1600mV
+                     - Domain-3 current limit is 0mA -> 20mA.
+
+                   Consumer Level: This is defined by consumer drivers
+                   dynamically setting voltage or current limit levels.
+
+                   e.g. a consumer backlight driver asks for a current increase
+                   from 5mA to 10mA to increase LCD illumination. This passes
+                   to through the levels as follows :-
+
+                   Consumer: need to increase LCD brightness. Lookup and
+                   request next current mA value in brightness table (the
+                   consumer driver could be used on several different
+                   personalities based upon the same reference device).
+
+                   Power Domain: is the new current limit within the domain
+                   operating limits for this domain and system state (e.g.
+                   battery power, USB power)
+
+                   Regulator Domains: is the new current limit within the
+                   regulator operating parameters for input/ouput voltage.
+
+                   If the regulator request passes all the constraint tests
+                   then the new regulator value is applied.
+
+
+Design
+======
+
+The framework is designed and targeted at SoC based devices but may also be
+relevant to non SoC devices and is split into the following four interfaces:-
+
+
+   1. Consumer driver interface.
+
+      This uses a similar API to the kernel clock interface in that consumer
+      drivers can get and put a regulator (like they can with clocks atm) and
+      get/set voltage, current limit, mode, enable and disable. This should
+      allow consumers complete control over their supply voltage and current
+      limit. This also compiles out if not in use so drivers can be reused in
+      systems with no regulator based power control.
+
+        See Documentation/power/regulator/consumer.txt
+
+   2. Regulator driver interface.
+
+      This allows regulator drivers to register their regulators and provide
+      operations to the core. It also has a notifier call chain for propagating
+      regulator events to clients.
+
+        See Documentation/power/regulator/regulator.txt
+
+   3. Machine interface.
+
+      This interface is for machine specific code and allows the creation of
+      voltage/current domains (with constraints) for each regulator. It can
+      provide regulator constraints that will prevent device damage through
+      overvoltage or over current caused by buggy client drivers. It also
+      allows the creation of a regulator tree whereby some regulators are
+      supplied by others (similar to a clock tree).
+
+        See Documentation/power/regulator/machine.txt
+
+   4. Userspace ABI.
+
+      The framework also exports a lot of useful voltage/current/opmode data to
+      userspace via sysfs. This could be used to help monitor device power
+      consumption and status.
+
+        See Documentation/ABI/testing/regulator-sysfs.txt
diff --git a/Documentation/power/regulator/regulator.txt b/Documentation/power/regulator/regulator.txt
new file mode 100644
index 000000000000..a69050143592
--- /dev/null
+++ b/Documentation/power/regulator/regulator.txt
@@ -0,0 +1,30 @@
+Regulator Driver Interface
+==========================
+
+The regulator driver interface is relatively simple and designed to allow
+regulator drivers to register their services with the core framework.
+
+
+Registration
+============
+
+Drivers can register a regulator by calling :-
+
+struct regulator_dev *regulator_register(struct regulator_desc *regulator_desc,
+					  void *reg_data);
+
+This will register the regulators capabilities and operations the regulator
+core. The core does not touch reg_data (private to regulator driver).
+
+Regulators can be unregistered by calling :-
+
+void regulator_unregister(struct regulator_dev *rdev);
+
+
+Regulator Events
+================
+Regulators can send events (e.g. over temp, under voltage, etc) to consumer
+drivers by calling :-
+
+int regulator_notifier_call_chain(struct regulator_dev *rdev,
+				  unsigned long event, void *data);
diff --git a/Documentation/powerpc/00-INDEX b/Documentation/powerpc/00-INDEX
index 3be84aa38dfe..29d839ce7327 100644
--- a/Documentation/powerpc/00-INDEX
+++ b/Documentation/powerpc/00-INDEX
@@ -20,8 +20,6 @@ mpc52xx-device-tree-bindings.txt
 	- MPC5200 Device Tree Bindings
 ppc_htab.txt
 	- info about the Linux/PPC /proc/ppc_htab entry
-SBC8260_memory_mapping.txt
-	- EST SBC8260 board info
 smp.txt
 	- use and state info about Linux/PPC on MP machines
 sound.txt
diff --git a/Documentation/powerpc/SBC8260_memory_mapping.txt b/Documentation/powerpc/SBC8260_memory_mapping.txt
deleted file mode 100644
index e6e9ee0506c3..000000000000
--- a/Documentation/powerpc/SBC8260_memory_mapping.txt
+++ /dev/null
@@ -1,197 +0,0 @@
-Please mail me (Jon Diekema, diekema_jon@si.com or diekema@cideas.com)
-if you have questions, comments or corrections.
-
-	* EST SBC8260 Linux memory mapping rules
-
-	http://www.estc.com/ 
-	http://www.estc.com/products/boards/SBC8260-8240_ds.html
-
-	Initial conditions:
-	-------------------
-	
-	Tasks that need to be perform by the boot ROM before control is
-	transferred to zImage (compressed Linux kernel):
-
-	- Define the IMMR to 0xf0000000
-
-	- Initialize the memory controller so that RAM is available at
-	  physical address 0x00000000.  On the SBC8260 is this 16M (64M)
-	  SDRAM.
-
-	- The boot ROM should only clear the RAM that it is using.
-
-	  The reason for doing this is to enhances the chances of a
-	  successful post mortem on a Linux panic.  One of the first
-	  items to examine is the 16k (LOG_BUF_LEN) circular console
-	  buffer called log_buf which is defined in kernel/printk.c.
-
-	- To enhance boot ROM performance, the I-cache can be enabled.
-
-	  Date: Mon, 22 May 2000 14:21:10 -0700
-	  From: Neil Russell <caret@c-side.com>
-
-	  LiMon (LInux MONitor) runs with and starts Linux with MMU
-	  off, I-cache enabled, D-cache disabled.  The I-cache doesn't
-	  need hints from the MMU to work correctly as the D-cache
-	  does.  No D-cache means no special code to handle devices in
-	  the presence of cache (no snooping, etc). The use of the
-	  I-cache means that the monitor can run acceptably fast
-	  directly from ROM, rather than having to copy it to RAM.
-
-	- Build the board information structure (see 
-	  include/asm-ppc/est8260.h for its definition)
-
-	- The compressed Linux kernel (zImage) contains a bootstrap loader 
-	  that is position independent; you can load it into any RAM, 
-	  ROM or FLASH memory address >= 0x00500000 (above 5 MB), or
-	  at its link address of 0x00400000 (4 MB).
-
-	  Note: If zImage is loaded at its link address of 0x00400000 (4 MB),
-	        then zImage will skip the step of moving itself to 
-		its link address.
-
-	- Load R3 with the address of the board information structure
-
-	- Transfer control to zImage
-
-	- The Linux console port is SMC1, and the baud rate is controlled
-	  from the bi_baudrate field of the board information structure.
-	  On thing to keep in mind when picking the baud rate, is that
-	  there is no flow control on the SMC ports.  I would stick
-	  with something safe and standard like 19200.
-
-	  On the EST SBC8260, the SMC1 port is on the COM1 connector of
-	  the board.
-
-	
-	EST SBC8260 defaults:
-	---------------------
-
-                                Chip
-        Memory                  Sel  Bus   Use
-        ---------------------   ---  ---   ----------------------------------
-	0x00000000-0x03FFFFFF   CS2  60x   (16M or 64M)/64M SDRAM
-	0x04000000-0x04FFFFFF   CS4  local  4M/16M SDRAM (soldered to the board)
-	0x21000000-0x21000000   CS7  60x    1B/64K Flash present detect (from the flash SIMM)
-	0x21000001-0x21000001   CS7  60x    1B/64K Switches (read) and LEDs (write)
-	0x22000000-0x2200FFFF   CS5  60x    8K/64K EEPROM
-	0xFC000000-0xFCFFFFFF   CS6  60x    2M/16M flash (8 bits wide, soldered to the board)
-	0xFE000000-0xFFFFFFFF   CS0  60x    4M/16M flash (SIMM)
-
-	Notes:
-	------
-
-	- The chip selects can map 32K blocks and up (powers of 2)
-
-	- The SDRAM machine can handled up to 128Mbytes per chip select
-
-	- Linux uses the 60x bus memory (the SDRAM DIMM) for the 
-	  communications buffers.
-
-	- BATs can map 128K-256Mbytes each.  There are four data BATs and
-	  four instruction BATs.  Generally the data and instruction BATs
-	  are mapped the same.
-
-	- The IMMR must be set above the kernel virtual memory addresses,
-	  which start at 0xC0000000.  Otherwise, the kernel may crash as
-	  soon as you start any threads or processes due to VM collisions 
-	  in the kernel or user process space.
-
-
-	  Details from Dan Malek <dan_malek@mvista.com> on 10/29/1999:
-
-	  The user application virtual space consumes the first 2 Gbytes
-	  (0x00000000 to 0x7FFFFFFF).  The kernel virtual text starts at
-	  0xC0000000, with data following.  There is a "protection hole"
-	  between the end of kernel data and the start of the kernel
-	  dynamically allocated space, but this space is still within
-	  0xCxxxxxxx.
-
-	  Obviously the kernel can't map any physical addresses 1:1 in
-	  these ranges.
-
-
-	  Details from Dan Malek <dan_malek@mvista.com> on 5/19/2000:
-
-	  During the early kernel initialization, the kernel virtual
-	  memory allocator is not operational.  Prior to this KVM
-	  initialization, we choose to map virtual to physical addresses
-	  1:1.  That is, the kernel virtual address exactly matches the
-	  physical address on the bus.  These mappings are typically done
-	  in arch/ppc/kernel/head.S, or arch/ppc/mm/init.c.  Only
-	  absolutely necessary mappings should be done at this time, for
-	  example board control registers or a serial uart.  Normal device
-	  driver initialization should map resources later when necessary.
-
-	  Although platform dependent, and certainly the case for embedded
-	  8xx, traditionally memory is mapped at physical address zero,
-	  and I/O devices above physical address 0x80000000.  The lowest
-	  and highest (above 0xf0000000) I/O addresses are traditionally 
-	  used for devices or registers we need to map during kernel 
-	  initialization and prior to KVM operation.  For this reason, 
-	  and since it followed prior PowerPC platform examples, I chose 
-	  to map the embedded 8xx kernel to the 0xc0000000 virtual address.
-	  This way, we can enable the MMU to map the kernel for proper 
-	  operation, and still map a few windows before the KVM is operational.
-
-	  On some systems, you could possibly run the kernel at the 
-	  0x80000000 or any other virtual address.  It just depends upon 
-	  mapping that must be done prior to KVM operational.  You can never 
-	  map devices or kernel spaces that overlap with the user virtual 
-	  space.  This is why default IMMR mapping used by most BDM tools 
-	  won't work.  They put the IMMR at something like 0x10000000 or 
-	  0x02000000 for example.  You simply can't map these addresses early
-	  in the kernel, and continue proper system operation.
-
-	  The embedded 8xx/82xx kernel is mature enough that all you should 
-	  need to do is map the IMMR someplace at or above 0xf0000000 and it 
-	  should boot far enough to get serial console messages and KGDB 
-	  connected on any platform.  There are lots of other subtle memory 
-	  management design features that you simply don't need to worry 
-	  about.  If you are changing functions related to MMU initialization,
-	  you are likely breaking things that are known to work and are 
-	  heading down a path of disaster and frustration.  Your changes 
-	  should be to make the flexibility of the processor fit Linux, 
-	  not force arbitrary and non-workable memory mappings into Linux.
-
-	- You don't want to change KERNELLOAD or KERNELBASE, otherwise the
-	  virtual memory and MMU code will get confused.
-	
-	  arch/ppc/Makefile:KERNELLOAD = 0xc0000000
-
-	  include/asm-ppc/page.h:#define PAGE_OFFSET    0xc0000000
-	  include/asm-ppc/page.h:#define KERNELBASE     PAGE_OFFSET
-
-	- RAM is at physical address 0x00000000, and gets mapped to 
-	  virtual address 0xC0000000 for the kernel.
-
-
-	Physical addresses used by the Linux kernel:
-	--------------------------------------------
-
-	0x00000000-0x3FFFFFFF   1GB reserved for RAM
-	0xF0000000-0xF001FFFF   128K IMMR  64K used for dual port memory,
-                                 64K for 8260 registers
-
-	
-        Logical addresses used by the Linux kernel:
-	-------------------------------------------
-
-	0xF0000000-0xFFFFFFFF   256M BAT0 (IMMR: dual port RAM, registers)
-	0xE0000000-0xEFFFFFFF   256M BAT1 (I/O space for custom boards)
-	0xC0000000-0xCFFFFFFF   256M BAT2 (RAM)
-	0xD0000000-0xDFFFFFFF   256M BAT3 (if RAM > 256MByte)
-
-
-	EST SBC8260 Linux mapping:
-	--------------------------
-
-	DBAT0, IBAT0, cache inhibited:
-
-                                Chip
-        Memory                  Sel  Use
-        ---------------------   ---  ---------------------------------
-        0xF0000000-0xF001FFFF   n/a  IMMR: dual port RAM, registers
-
-        DBAT1, IBAT1, cache inhibited:
-
diff --git a/Documentation/powerpc/booting-without-of.txt b/Documentation/powerpc/booting-without-of.txt
index ea1b70b35793..de4063cb4fdc 100644
--- a/Documentation/powerpc/booting-without-of.txt
+++ b/Documentation/powerpc/booting-without-of.txt
@@ -59,6 +59,7 @@ Table of Contents
       p) Freescale Synchronous Serial Interface
 	  q) USB EHCI controllers
       r) MDIO on GPIOs
+      s) SPI busses
 
   VII - Marvell Discovery mv64[345]6x System Controller chips
     1) The /system-controller node
@@ -277,7 +278,7 @@ it with special cases.
         a 64-bit platform.
 
         d) request and get assigned a platform number (see PLATFORM_*
-        constants in include/asm-powerpc/processor.h
+        constants in arch/powerpc/include/asm/processor.h
 
 32-bit embedded kernels:
 
@@ -339,7 +340,7 @@ the block to RAM before passing it to the kernel.
 ---------
 
    The kernel is entered with r3 pointing to an area of memory that is
-   roughly described in include/asm-powerpc/prom.h by the structure
+   roughly described in arch/powerpc/include/asm/prom.h by the structure
    boot_param_header:
 
 struct boot_param_header {
@@ -707,7 +708,7 @@ device or bus to be described by the device tree.
 In general, the format of an address for a device is defined by the
 parent bus type, based on the #address-cells and #size-cells
 properties.  Note that the parent's parent definitions of #address-cells
-and #size-cells are not inhereted so every node with children must specify
+and #size-cells are not inherited so every node with children must specify
 them.  The kernel requires the root node to have those properties defining
 addresses format for devices directly mapped on the processor bus.
 
@@ -1776,7 +1777,7 @@ platforms are moved over to use the flattened-device-tree model.
 
       Xilinx uartlite devices are simple fixed speed serial ports.
 
-      Requred properties:
+      Required properties:
        - current-speed : Baud rate of uartlite
 
       v) Xilinx hwicap
@@ -1798,7 +1799,7 @@ platforms are moved over to use the flattened-device-tree model.
       Xilinx UART 16550 devices are very similar to the NS16550 but with
       different register spacing and an offset from the base address.
 
-      Requred properties:
+      Required properties:
        - clock-frequency : Frequency of the clock input
        - reg-offset : A value of 3 is required
        - reg-shift : A value of 2 is required
@@ -1883,6 +1884,62 @@ platforms are moved over to use the flattened-device-tree model.
 			 &qe_pio_c 6>;
 	};
 
+    s) SPI (Serial Peripheral Interface) busses
+
+    SPI busses can be described with a node for the SPI master device
+    and a set of child nodes for each SPI slave on the bus.  For this
+    discussion, it is assumed that the system's SPI controller is in
+    SPI master mode.  This binding does not describe SPI controllers
+    in slave mode.
+
+    The SPI master node requires the following properties:
+    - #address-cells  - number of cells required to define a chip select
+			address on the SPI bus.
+    - #size-cells     - should be zero.
+    - compatible      - name of SPI bus controller following generic names
+			recommended practice.
+    No other properties are required in the SPI bus node.  It is assumed
+    that a driver for an SPI bus device will understand that it is an SPI bus.
+    However, the binding does not attempt to define the specific method for
+    assigning chip select numbers.  Since SPI chip select configuration is
+    flexible and non-standardized, it is left out of this binding with the
+    assumption that board specific platform code will be used to manage
+    chip selects.  Individual drivers can define additional properties to
+    support describing the chip select layout.
+
+    SPI slave nodes must be children of the SPI master node and can
+    contain the following properties.
+    - reg             - (required) chip select address of device.
+    - compatible      - (required) name of SPI device following generic names
+			recommended practice
+    - spi-max-frequency - (required) Maximum SPI clocking speed of device in Hz
+    - spi-cpol        - (optional) Empty property indicating device requires
+			inverse clock polarity (CPOL) mode
+    - spi-cpha        - (optional) Empty property indicating device requires
+			shifted clock phase (CPHA) mode
+
+    SPI example for an MPC5200 SPI bus:
+		spi@f00 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "fsl,mpc5200b-spi","fsl,mpc5200-spi";
+			reg = <0xf00 0x20>;
+			interrupts = <2 13 0 2 14 0>;
+			interrupt-parent = <&mpc5200_pic>;
+
+			ethernet-switch@0 {
+				compatible = "micrel,ks8995m";
+				spi-max-frequency = <1000000>;
+				reg = <0>;
+			};
+
+			codec@1 {
+				compatible = "ti,tlv320aic26";
+				spi-max-frequency = <100000>;
+				reg = <1>;
+			};
+		};
+
 VII - Marvell Discovery mv64[345]6x System Controller chips
 ===========================================================
 
@@ -1896,7 +1953,7 @@ prefixed with the string "marvell,", for Marvell Technology Group Ltd.
 1) The /system-controller node
 
   This node is used to represent the system-controller and must be
-  present when the system uses a system contller chip. The top-level
+  present when the system uses a system controller chip. The top-level
   system-controller node contains information that is global to all
   devices within the system controller chip. The node name begins
   with "system-controller" followed by the unit address, which is
diff --git a/Documentation/powerpc/dts-bindings/fsl/cpm_qe/serial.txt b/Documentation/powerpc/dts-bindings/fsl/cpm_qe/serial.txt
index b35f3482e3e4..2ea76d9d137c 100644
--- a/Documentation/powerpc/dts-bindings/fsl/cpm_qe/serial.txt
+++ b/Documentation/powerpc/dts-bindings/fsl/cpm_qe/serial.txt
@@ -7,6 +7,15 @@ Currently defined compatibles:
 - fsl,cpm2-scc-uart
 - fsl,qe-uart
 
+Modem control lines connected to GPIO controllers are listed in the gpios
+property as described in booting-without-of.txt, section IX.1 in the following
+order:
+
+CTS, RTS, DCD, DSR, DTR, and RI.
+
+The gpios property is optional and can be left out when control lines are
+not used.
+
 Example:
 
 	serial@11a00 {
@@ -18,4 +27,6 @@ Example:
 		interrupt-parent = <&PIC>;
 		fsl,cpm-brg = <1>;
 		fsl,cpm-command = <00800000>;
+		gpios = <&gpio_c 15 0
+			 &gpio_d 29 0>;
 	};
diff --git a/Documentation/powerpc/eeh-pci-error-recovery.txt b/Documentation/powerpc/eeh-pci-error-recovery.txt
index df7afe43d462..9d4e33df624c 100644
--- a/Documentation/powerpc/eeh-pci-error-recovery.txt
+++ b/Documentation/powerpc/eeh-pci-error-recovery.txt
@@ -133,7 +133,7 @@ error.  Given an arbitrary address, the routine
 pci_get_device_by_addr() will find the pci device associated
 with that address (if any).
 
-The default include/asm-powerpc/io.h macros readb(), inb(), insb(),
+The default arch/powerpc/include/asm/io.h macros readb(), inb(), insb(),
 etc. include a check to see if the i/o read returned all-0xff's.
 If so, these make a call to eeh_dn_check_failure(), which in turn
 asks the firmware if the all-ff's value is the sign of a true EEH
diff --git a/Documentation/powerpc/qe_firmware.txt b/Documentation/powerpc/qe_firmware.txt
index 896266432d33..06da4d4b44f9 100644
--- a/Documentation/powerpc/qe_firmware.txt
+++ b/Documentation/powerpc/qe_firmware.txt
@@ -217,7 +217,7 @@ Although it is not recommended, you can specify '0' in the soc.model
 field to skip matching SOCs altogether.
 
 The 'model' field is a 16-bit number that matches the actual SOC. The
-'major' and 'minor' fields are the major and minor revision numbrs,
+'major' and 'minor' fields are the major and minor revision numbers,
 respectively, of the SOC.
 
 For example, to match the 8323, revision 1.0:
diff --git a/Documentation/rfkill.txt b/Documentation/rfkill.txt
index 0843ed0163a5..6fcb3060dec5 100644
--- a/Documentation/rfkill.txt
+++ b/Documentation/rfkill.txt
@@ -363,6 +363,11 @@ This rule exists because users of the rfkill subsystem expect to get (and set,
 when possible) the overall transmitter rfkill state, not of a particular rfkill
 line.
 
+5. During suspend, the rfkill class will attempt to soft-block the radio
+through a call to rfkill->toggle_radio, and will try to restore its previous
+state during resume.  After a rfkill class is suspended, it will *not* call
+rfkill->toggle_radio until it is resumed.
+
 Example of a WLAN wireless driver connected to the rfkill subsystem:
 --------------------------------------------------------------------
 
@@ -390,9 +395,10 @@ rfkill lines are inactive, it must return RFKILL_STATE_SOFT_BLOCKED if its soft
 rfkill input line is active.  Only if none of the rfkill input lines are
 active, will it return RFKILL_STATE_UNBLOCKED.
 
-If it doesn't implement the get_state() hook, it must make sure that its calls
-to rfkill_force_state() are enough to keep the status always up-to-date, and it
-must do a rfkill_force_state() on resume from sleep.
+Since the device has a hardware rfkill line, it IS subject to state changes
+external to rfkill.  Therefore, the driver must make sure that it calls
+rfkill_force_state() to keep the status always up-to-date, and it must do a
+rfkill_force_state() on resume from sleep.
 
 Every time the driver gets a notification from the card that one of its rfkill
 lines changed state (polling might be needed on badly designed cards that don't
@@ -422,13 +428,24 @@ of the hardware is unknown), or read-write (where the hardware can be queried
 about its current state).
 
 The rfkill class will call the get_state hook of a device every time it needs
-to know the *real* current state of the hardware.  This can happen often.
+to know the *real* current state of the hardware.  This can happen often, but
+it does not do any polling, so it is not enough on hardware that is subject
+to state changes outside of the rfkill subsystem.
+
+Therefore, calling rfkill_force_state() when a state change happens is
+mandatory when the device has a hardware rfkill line, or when something else
+like the firmware could cause its state to be changed without going through the
+rfkill class.
 
 Some hardware provides events when its status changes.  In these cases, it is
 best for the driver to not provide a get_state hook, and instead register the
 rfkill class *already* with the correct status, and keep it updated using
 rfkill_force_state() when it gets an event from the hardware.
 
+rfkill_force_state() must be used on the device resume handlers to update the
+rfkill status, should there be any chance of the device status changing during
+the sleep.
+
 There is no provision for a statically-allocated rfkill struct.  You must
 use rfkill_allocate() to allocate one.
 
diff --git a/Documentation/s390/driver-model.txt b/Documentation/s390/driver-model.txt
index e938c442277d..bde473df748d 100644
--- a/Documentation/s390/driver-model.txt
+++ b/Documentation/s390/driver-model.txt
@@ -25,7 +25,7 @@ device 4711 via subchannel 1 in subchannel set 0, and subchannel 2 is a non-I/O
 subchannel. Device 1234 is accessed via subchannel 0 in subchannel set 1.
 
 The subchannel named 'defunct' does not represent any real subchannel on the
-system; it is a pseudo subchannel where disconnnected ccw devices are moved to
+system; it is a pseudo subchannel where disconnected ccw devices are moved to
 if they are displaced by another ccw device becoming operational on their
 former subchannel. The ccw devices will be moved again to a proper subchannel
 if they become operational again on that subchannel.
diff --git a/Documentation/scsi/ChangeLog.megaraid_sas b/Documentation/scsi/ChangeLog.megaraid_sas
index 716fcc1cafb5..c851ef497795 100644
--- a/Documentation/scsi/ChangeLog.megaraid_sas
+++ b/Documentation/scsi/ChangeLog.megaraid_sas
@@ -1,3 +1,26 @@
+
+1 Release Date    : Thur.July. 24 11:41:51 PST 2008 -
+                       (emaild-id:megaraidlinux@lsi.com)
+                       Sumant Patro
+                       Bo Yang
+
+2 Current Version : 00.00.04.01
+3 Older Version   : 00.00.03.22
+
+1. Add the new controller (0078, 0079) support to the driver
+       Those controllers are LSI's next generatation(gen2) SAS controllers.
+
+1 Release Date    : Mon.June. 23 10:12:45 PST 2008 -
+                       (emaild-id:megaraidlinux@lsi.com)
+                       Sumant Patro
+                       Bo Yang
+
+2 Current Version : 00.00.03.22
+3 Older Version   : 00.00.03.20
+
+1. Add shutdown DCMD cmd to the shutdown routine to make FW shutdown proper.
+2. Unexpected interrupt occurs in HWR Linux driver, add the dumy readl pci flush will fix this issue.
+
 1 Release Date    : Mon. March 10 11:02:31 PDT 2008 -
 			(emaild-id:megaraidlinux@lsi.com)
 			Sumant Patro
diff --git a/Documentation/scsi/ibmmca.txt b/Documentation/scsi/ibmmca.txt
index a810421f1fb3..3920f28710c4 100644
--- a/Documentation/scsi/ibmmca.txt
+++ b/Documentation/scsi/ibmmca.txt
@@ -524,7 +524,7 @@
    - Michael Lang
  
    June 25 1997: (v1.8b)
-   1) Some cosmetical changes for the handling of SCSI-device-types.
+   1) Some cosmetic changes for the handling of SCSI-device-types.
       Now, also CD-Burners / WORMs and SCSI-scanners should work. For
       MO-drives I have no experience, therefore not yet supported.
       In logical_devices I changed from different type-variables to one
@@ -914,7 +914,7 @@
       in version 4.0. This was never really necessary, as all troubles were
       based on non-command related reasons up to now, so bypassing commands
       did not help to avoid any bugs. It is kept in 3.2X for debugging reasons.
-   5) Dynamical reassignment of ldns was again verified and analyzed to be
+   5) Dynamic reassignment of ldns was again verified and analyzed to be
       completely inoperational. This is corrected and should work now.
    6) All commands that get sent to the SCSI adapter were verified and
       completed in such a way, that they are now completely conform to the
@@ -1386,7 +1386,7 @@
    concerning the Linux-kernel in special, this SCSI-driver comes without any
    warranty. Its functionality is tested as good as possible on certain 
    machines and combinations of computer hardware, which does not exclude,
-   that dataloss or severe damage of hardware is possible while using this
+   that data loss or severe damage of hardware is possible while using this
    part of software on some arbitrary computer hardware or in combination 
    with other software packages. It is highly recommended to make backup
    copies of your data before using this software. Furthermore, personal
diff --git a/Documentation/scsi/lpfc.txt b/Documentation/scsi/lpfc.txt
index 4dbe41370a6d..5741ea8aa88a 100644
--- a/Documentation/scsi/lpfc.txt
+++ b/Documentation/scsi/lpfc.txt
@@ -36,7 +36,7 @@ Cable pull and temporary device Loss:
   being removed, a switch rebooting, or a device reboot), the driver could
   hide the disappearance of the device from the midlayer. I/O's issued to
   the LLDD would simply be queued for a short duration, allowing the device
-  to reappear or link come back alive, with no inadvertant side effects
+  to reappear or link come back alive, with no inadvertent side effects
   to the system. If the driver did not hide these conditions, i/o would be
   errored by the driver, the mid-layer would exhaust its retries, and the
   device would be taken offline. Manual intervention would be required to
diff --git a/Documentation/scsi/scsi_fc_transport.txt b/Documentation/scsi/scsi_fc_transport.txt
index d403e46d8463..75143f0c23b6 100644
--- a/Documentation/scsi/scsi_fc_transport.txt
+++ b/Documentation/scsi/scsi_fc_transport.txt
@@ -65,7 +65,7 @@ Overview:
     discussion will concentrate on NPIV.
 
   Note: World Wide Name assignment (and uniqueness guarantees) are left
-    up to an administrative entity controling the vport. For example,
+    up to an administrative entity controlling the vport. For example,
     if vports are to be associated with virtual machines, a XEN mgmt
     utility would be responsible for creating wwpn/wwnn's for the vport,
     using it's own naming authority and OUI. (Note: it already does this
@@ -91,7 +91,7 @@ Device Trees and Vport Objects:
   Here's what to expect in the device tree :
    The typical Physical Port's Scsi_Host:
      /sys/devices/.../host17/
-   and it has the typical decendent tree:
+   and it has the typical descendant tree:
      /sys/devices/.../host17/rport-17:0-0/target17:0:0/17:0:0:0:
    and then the vport is created on the Physical Port:
      /sys/devices/.../host17/vport-17:0-0
@@ -192,7 +192,7 @@ Vport States:
       independent of the adapter's link state.
     - Instantiation of the vport on the FC link via ELS traffic, etc.
       This is equivalent to a "link up" and successfull link initialization.
-  Futher information can be found in the interfaces section below for
+  Further information can be found in the interfaces section below for
   Vport Creation.
 
   Once a vport has been instantiated with the kernel/LLDD, a vport state
diff --git a/Documentation/sh/clk.txt b/Documentation/sh/clk.txt
index 9aef710e9a4b..114b595cfa97 100644
--- a/Documentation/sh/clk.txt
+++ b/Documentation/sh/clk.txt
@@ -12,7 +12,7 @@ means no changes to adjanced clock
 Internally, the clk_set_rate_ex forwards request to clk->ops->set_rate method,
 if it is present in ops structure. The method should set the clock rate and adjust
 all needed clocks according to the passed algo_id.
-Exact values for algo_id are machine-dependend. For the sh7722, the following
+Exact values for algo_id are machine-dependent. For the sh7722, the following
 values are defined:
 
 	NO_CHANGE	= 0,
diff --git a/Documentation/sound/alsa/ALSA-Configuration.txt b/Documentation/sound/alsa/ALSA-Configuration.txt
index 72aff61e7315..b117e42a6166 100644
--- a/Documentation/sound/alsa/ALSA-Configuration.txt
+++ b/Documentation/sound/alsa/ALSA-Configuration.txt
@@ -1024,6 +1024,7 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
 	  intel-mac-v3	Intel Mac Type 3
 	  intel-mac-v4	Intel Mac Type 4
 	  intel-mac-v5	Intel Mac Type 5
+	  intel-mac-auto Intel Mac (detect type according to subsystem id)
 	  macmini	Intel Mac Mini (equivalent with type 3)
 	  macbook	Intel Mac Book (eq. type 5)
 	  macbook-pro-v1 Intel Mac Book Pro 1st generation (eq. type 3)
@@ -1143,8 +1144,6 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
 
     This module supports autoprobe and multiple cards.
 
-    Power management is _not_ supported.
-
   Module snd-ice1712
   ------------------
 
@@ -1627,8 +1626,6 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
 
     This module supports autoprobe and multiple cards.
 
-    Power management is _not_ supported.
-
   Module snd-pcsp
   -----------------
 
@@ -2080,13 +2077,11 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
   Module snd-virtuoso
   -------------------
 
-    Module for sound cards based on the Asus AV200 chip, i.e.,
-    Xonar D2 and Xonar D2X.
+    Module for sound cards based on the Asus AV100/AV200 chips,
+    i.e., Xonar D1, DX, D2 and D2X.
 
     This module supports autoprobe and multiple cards.
 
-    Power management is _not_ supported.
-
   Module snd-vx222
   ----------------
 
diff --git a/Documentation/sound/alsa/Audiophile-Usb.txt b/Documentation/sound/alsa/Audiophile-Usb.txt
index 2ad5e6306c44..a4c53d8961e1 100644
--- a/Documentation/sound/alsa/Audiophile-Usb.txt
+++ b/Documentation/sound/alsa/Audiophile-Usb.txt
@@ -236,15 +236,15 @@ The parameter can be given:
        alias snd-card-1 snd-usb-audio
        options snd-usb-audio index=1 device_setup=0x09
 
-CAUTION when initializaing the device
+CAUTION when initializing the device
 -------------------------------------
 
  * Correct initialization on the device requires that device_setup is given to
    the module BEFORE the device is turned on. So, if you use the "manual probing"
    method described above, take care to power-on the device AFTER this initialization.
 
- * Failing to respect this will lead in a misconfiguration of the device. In this case
-   turn off the device, unproble the snd-usb-audio module, then probe it again with 
+ * Failing to respect this will lead to a misconfiguration of the device. In this case
+   turn off the device, unprobe the snd-usb-audio module, then probe it again with
    correct device_setup parameter and then (and only then) turn on the device again.
 
  * If you've correctly initialized the device in a valid mode and then want to switch
@@ -388,9 +388,9 @@ There are 2 main potential issues when using Jackd with the device:
 
 Jack supports big endian devices only in recent versions (thanks to
 Andreas Steinmetz for his first big-endian patch). I can't remember 
-extacly when this support was released into jackd, let's just say that 
+exactly when this support was released into jackd, let's just say that
 with jackd version 0.103.0 it's almost ok (just a small bug is affecting 
-16bits Big-Endian devices, but since you've read  carefully the above 
+16bits Big-Endian devices, but since you've read carefully the above
 paragraphs, you're now using kernel >= 2.6.23 and your 16bits devices 
 are now Little Endians ;-) ).
 
diff --git a/Documentation/sound/alsa/hda_codec.txt b/Documentation/sound/alsa/hda_codec.txt
index 8e1b02526698..34e87ec1379c 100644
--- a/Documentation/sound/alsa/hda_codec.txt
+++ b/Documentation/sound/alsa/hda_codec.txt
@@ -67,7 +67,7 @@ CONFIG_SND_HDA_POWER_SAVE kconfig.  It's called when the codec needs
 to power up or may power down.  The controller should check the all
 belonging codecs on the bus whether they are actually powered off
 (check codec->power_on), and optionally the driver may power down the
-contoller side, too.
+controller side, too.
 
 The bus instance is created via snd_hda_bus_new().  You need to pass
 the card instance, the template, and the pointer to store the
diff --git a/Documentation/sound/alsa/soc/dapm.txt b/Documentation/sound/alsa/soc/dapm.txt
index c784a18b94dc..b2ed6983f40d 100644
--- a/Documentation/sound/alsa/soc/dapm.txt
+++ b/Documentation/sound/alsa/soc/dapm.txt
@@ -68,7 +68,7 @@ Audio DAPM widgets fall into a number of types:-
 (Widgets are defined in include/sound/soc-dapm.h)
 
 Widgets are usually added in the codec driver and the machine driver. There are
-convience macros defined in soc-dapm.h that can be used to quickly build a
+convenience macros defined in soc-dapm.h that can be used to quickly build a
 list of widgets of the codecs and machines DAPM widgets.
 
 Most widgets have a name, register, shift and invert. Some widgets have extra
diff --git a/Documentation/sparse.txt b/Documentation/sparse.txt
index 1a3bdc27d95e..42f43fa59f24 100644
--- a/Documentation/sparse.txt
+++ b/Documentation/sparse.txt
@@ -73,10 +73,10 @@ recompiled, or use "make C=2" to run sparse on the files whether they need to
 be recompiled or not.  The latter is a fast way to check the whole tree if you
 have already built it.
 
-The optional make variable CHECKFLAGS can be used to pass arguments to sparse.
-The build system passes -Wbitwise to sparse automatically.  To perform
-endianness checks, you may define __CHECK_ENDIAN__:
+The optional make variable CF can be used to pass arguments to sparse.  The
+build system passes -Wbitwise to sparse automatically.  To perform endianness
+checks, you may define __CHECK_ENDIAN__:
 
-        make C=2 CHECKFLAGS="-D__CHECK_ENDIAN__"
+        make C=2 CF="-D__CHECK_ENDIAN__"
 
 These checks are disabled by default as they generate a host of warnings.
diff --git a/Documentation/spi/Makefile b/Documentation/spi/Makefile
new file mode 100644
index 000000000000..a5b03c88beae
--- /dev/null
+++ b/Documentation/spi/Makefile
@@ -0,0 +1,11 @@
+# kbuild trick to avoid linker error. Can be omitted if a module is built.
+obj- := dummy.o
+
+# List of programs to build
+hostprogs-y := spidev_test spidev_fdx
+
+# Tell kbuild to always build the programs
+always := $(hostprogs-y)
+
+HOSTCFLAGS_spidev_test.o += -I$(objtree)/usr/include
+HOSTCFLAGS_spidev_fdx.o += -I$(objtree)/usr/include
diff --git a/Documentation/spi/pxa2xx b/Documentation/spi/pxa2xx
index f3853cc37bde..bbe8dee681a5 100644
--- a/Documentation/spi/pxa2xx
+++ b/Documentation/spi/pxa2xx
@@ -19,7 +19,7 @@ Declaring PXA2xx Master Controllers
 -----------------------------------
 Typically a SPI master is defined in the arch/.../mach-*/board-*.c as a
 "platform device".  The master configuration is passed to the driver via a table
-found in include/asm-arm/arch-pxa/pxa2xx_spi.h:
+found in arch/arm/mach-pxa/include/mach/pxa2xx_spi.h:
 
 struct pxa2xx_spi_master {
 	enum pxa_ssp_type ssp_type;
@@ -94,7 +94,7 @@ using the "spi_board_info" structure found in "linux/spi/spi.h". See
 
 Each slave device attached to the PXA must provide slave specific configuration
 information via the structure "pxa2xx_spi_chip" found in
-"include/asm-arm/arch-pxa/pxa2xx_spi.h".  The pxa2xx_spi master controller driver
+"arch/arm/mach-pxa/include/mach/pxa2xx_spi.h".  The pxa2xx_spi master controller driver
 will uses the configuration whenever the driver communicates with the slave
 device.
 
diff --git a/Documentation/spi/spi-summary b/Documentation/spi/spi-summary
index 6d5f18143c50..8bae2f018d34 100644
--- a/Documentation/spi/spi-summary
+++ b/Documentation/spi/spi-summary
@@ -210,7 +210,7 @@ board should normally be set up and registered.
 
 So for example arch/.../mach-*/board-*.c files might have code like:
 
-	#include <asm/arch/spi.h>	/* for mysoc_spi_data */
+	#include <mach/spi.h>	/* for mysoc_spi_data */
 
 	/* if your mach-* infrastructure doesn't support kernels that can
 	 * run on multiple boards, pdata wouldn't benefit from "__init".
@@ -227,7 +227,7 @@ So for example arch/.../mach-*/board-*.c files might have code like:
 
 And SOC-specific utility code might look something like:
 
-	#include <asm/arch/spi.h>
+	#include <mach/spi.h>
 
 	static struct platform_device spi2 = { ... };
 
diff --git a/Documentation/sysctl/vm.txt b/Documentation/sysctl/vm.txt
index 8a4863c4edd4..d79eeda7a699 100644
--- a/Documentation/sysctl/vm.txt
+++ b/Documentation/sysctl/vm.txt
@@ -116,7 +116,7 @@ of kilobytes free.  The VM uses this number to compute a pages_min
 value for each lowmem zone in the system.  Each lowmem zone gets 
 a number of reserved free pages based proportionally on its size.
 
-Some minimal ammount of memory is needed to satisfy PF_MEMALLOC
+Some minimal amount of memory is needed to satisfy PF_MEMALLOC
 allocations; if you set this to lower than 1024KB, your system will
 become subtly broken, and prone to deadlock under high loads.
 
diff --git a/Documentation/timers/highres.txt b/Documentation/timers/highres.txt
index a73ecf5b4bdb..21332233cef1 100644
--- a/Documentation/timers/highres.txt
+++ b/Documentation/timers/highres.txt
@@ -125,7 +125,7 @@ increase of flexibility and the avoidance of duplicated code across
 architectures justifies the slight increase of the binary size.
 
 The conversion of an architecture has no functional impact, but allows to
-utilize the high resolution and dynamic tick functionalites without any change
+utilize the high resolution and dynamic tick functionalities without any change
 to the clock event device and timer interrupt code. After the conversion the
 enabling of high resolution timers and dynamic ticks is simply provided by
 adding the kernel/time/Kconfig file to the architecture specific Kconfig and
diff --git a/Documentation/unaligned-memory-access.txt b/Documentation/unaligned-memory-access.txt
index b0472ac5226a..f866c72291bf 100644
--- a/Documentation/unaligned-memory-access.txt
+++ b/Documentation/unaligned-memory-access.txt
@@ -218,9 +218,35 @@ If use of such macros is not convenient, another option is to use memcpy(),
 where the source or destination (or both) are of type u8* or unsigned char*.
 Due to the byte-wise nature of this operation, unaligned accesses are avoided.
 
+
+Alignment vs. Networking
+========================
+
+On architectures that require aligned loads, networking requires that the IP
+header is aligned on a four-byte boundary to optimise the IP stack. For
+regular ethernet hardware, the constant NET_IP_ALIGN is used. On most
+architectures this constant has the value 2 because the normal ethernet
+header is 14 bytes long, so in order to get proper alignment one needs to
+DMA to an address which can be expressed as 4*n + 2. One notable exception
+here is powerpc which defines NET_IP_ALIGN to 0 because DMA to unaligned
+addresses can be very expensive and dwarf the cost of unaligned loads.
+
+For some ethernet hardware that cannot DMA to unaligned addresses like
+4*n+2 or non-ethernet hardware, this can be a problem, and it is then
+required to copy the incoming frame into an aligned buffer. Because this is
+unnecessary on architectures that can do unaligned accesses, the code can be
+made dependent on CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS like so:
+
+#ifdef CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS
+	skb = original skb
+#else
+	skb = copy skb
+#endif
+
 --
-Author: Daniel Drake <dsd@gentoo.org>
+Authors: Daniel Drake <dsd@gentoo.org>,
+         Johannes Berg <johannes@sipsolutions.net>
 With help from: Alan Cox, Avuton Olrich, Heikki Orsila, Jan Engelhardt,
-Johannes Berg, Kyle McMartin, Kyle Moffett, Randy Dunlap, Robert Hancock,
-Uli Kunitz, Vadim Lobanov
+Kyle McMartin, Kyle Moffett, Randy Dunlap, Robert Hancock, Uli Kunitz,
+Vadim Lobanov
 
diff --git a/Documentation/usb/auerswald.txt b/Documentation/usb/auerswald.txt
deleted file mode 100644
index 7ee4d8f69116..000000000000
--- a/Documentation/usb/auerswald.txt
+++ /dev/null
@@ -1,30 +0,0 @@
-		Auerswald USB kernel driver
-		===========================
-
-What is it? What can I do with it?
-==================================
-The auerswald USB kernel driver connects your linux 2.4.x
-system to the auerswald usb-enabled devices.
-
-There are two types of auerswald usb devices:
-a) small PBX systems (ISDN)
-b) COMfort system telephones (ISDN)
-
-The driver installation creates the devices
-/dev/usb/auer0..15. These devices carry a vendor-
-specific protocol. You may run all auerswald java
-software on it. The java software needs a native
-library "libAuerUsbJNINative.so" installed on
-your system. This library is available from
-auerswald and shipped as part of the java software.
-
-You may create the devices with:
-	mknod -m 666 /dev/usb/auer0 c 180 112
-	...
-	mknod -m 666 /dev/usb/auer15 c 180 127
-
-Future plans
-============
-- Connection to ISDN4LINUX (the hisax interface)
-
-The maintainer of this driver is wolfgang@iksw-muees.de
diff --git a/Documentation/usb/authorization.txt b/Documentation/usb/authorization.txt
index 2af400609498..381b22ee7834 100644
--- a/Documentation/usb/authorization.txt
+++ b/Documentation/usb/authorization.txt
@@ -8,7 +8,7 @@ not) in a system. This feature will allow you to implement a lock-down
 of USB devices, fully controlled by user space.
 
 As of now, when a USB device is connected it is configured and
-it's interfaces inmediately made available to the users. With this
+its interfaces are immediately made available to the users.  With this
 modification, only if root authorizes the device to be configured will
 then it be possible to use it.
 
diff --git a/Documentation/usb/power-management.txt b/Documentation/usb/power-management.txt
index b2fc4d4a9917..9d31140e3f5b 100644
--- a/Documentation/usb/power-management.txt
+++ b/Documentation/usb/power-management.txt
@@ -436,7 +436,12 @@ post_reset; the USB core guarantees that this is true of internal
 suspend/resume events as well.
 
 If a driver wants to block all suspend/resume calls during some
-critical section, it can simply acquire udev->pm_mutex.
+critical section, it can simply acquire udev->pm_mutex. Note that
+calls to resume may be triggered indirectly. Block IO due to memory
+allocations can make the vm subsystem resume a device. Thus while
+holding this lock you must not allocate memory with GFP_KERNEL or
+GFP_NOFS.
+
 Alternatively, if the critical section might call some of the
 usb_autopm_* routines, the driver can avoid deadlock by doing:
 
diff --git a/Documentation/video4linux/CARDLIST.au0828 b/Documentation/video4linux/CARDLIST.au0828
index 86d1c8e7b18f..eedc399e8deb 100644
--- a/Documentation/video4linux/CARDLIST.au0828
+++ b/Documentation/video4linux/CARDLIST.au0828
@@ -2,3 +2,4 @@
   1 -> Hauppauge HVR950Q                        (au0828)        [2040:7200,2040:7210,2040:7217,2040:721b,2040:721f,2040:7280,0fd9:0008]
   2 -> Hauppauge HVR850                         (au0828)        [2040:7240]
   3 -> DViCO FusionHDTV USB                     (au0828)        [0fe9:d620]
+  4 -> Hauppauge HVR950Q rev xxF8               (au0828)        [2040:7201,2040:7211,2040:7281]
diff --git a/Documentation/video4linux/CARDLIST.em28xx b/Documentation/video4linux/CARDLIST.em28xx
index 10591467ef16..89c7f32abf9f 100644
--- a/Documentation/video4linux/CARDLIST.em28xx
+++ b/Documentation/video4linux/CARDLIST.em28xx
@@ -1,11 +1,11 @@
   0 -> Unknown EM2800 video grabber             (em2800)        [eb1a:2800]
-  1 -> Unknown EM2750/28xx video grabber        (em2820/em2840) [eb1a:2750,eb1a:2820,eb1a:2821,eb1a:2860,eb1a:2861,eb1a:2870,eb1a:2881,eb1a:2883]
+  1 -> Unknown EM2750/28xx video grabber        (em2820/em2840) [eb1a:2820,eb1a:2821,eb1a:2860,eb1a:2861,eb1a:2870,eb1a:2881,eb1a:2883]
   2 -> Terratec Cinergy 250 USB                 (em2820/em2840) [0ccd:0036]
   3 -> Pinnacle PCTV USB 2                      (em2820/em2840) [2304:0208]
   4 -> Hauppauge WinTV USB 2                    (em2820/em2840) [2040:4200,2040:4201]
   5 -> MSI VOX USB 2.0                          (em2820/em2840)
   6 -> Terratec Cinergy 200 USB                 (em2800)
-  7 -> Leadtek Winfast USB II                   (em2800)
+  7 -> Leadtek Winfast USB II                   (em2800)        [0413:6023]
   8 -> Kworld USB2800                           (em2800)
   9 -> Pinnacle Dazzle DVC 90/DVC 100           (em2820/em2840) [2304:0207,2304:021a]
  10 -> Hauppauge WinTV HVR 900                  (em2880)        [2040:6500]
@@ -14,7 +14,46 @@
  13 -> Terratec Prodigy XS                      (em2880)        [0ccd:0047]
  14 -> Pixelview Prolink PlayTV USB 2.0         (em2820/em2840)
  15 -> V-Gear PocketTV                          (em2800)
- 16 -> Hauppauge WinTV HVR 950                  (em2880)        [2040:6513,2040:6517,2040:651b,2040:651f]
+ 16 -> Hauppauge WinTV HVR 950                  (em2883)        [2040:6513,2040:6517,2040:651b,2040:651f]
  17 -> Pinnacle PCTV HD Pro Stick               (em2880)        [2304:0227]
  18 -> Hauppauge WinTV HVR 900 (R2)             (em2880)        [2040:6502]
  19 -> PointNix Intra-Oral Camera               (em2860)
+ 20 -> AMD ATI TV Wonder HD 600                 (em2880)        [0438:b002]
+ 21 -> eMPIA Technology, Inc. GrabBeeX+ Video Encoder (em2800)        [eb1a:2801]
+ 22 -> Unknown EM2750/EM2751 webcam grabber     (em2750)        [eb1a:2750,eb1a:2751]
+ 23 -> Huaqi DLCW-130                           (em2750)
+ 24 -> D-Link DUB-T210 TV Tuner                 (em2820/em2840) [2001:f112]
+ 25 -> Gadmei UTV310                            (em2820/em2840)
+ 26 -> Hercules Smart TV USB 2.0                (em2820/em2840)
+ 27 -> Pinnacle PCTV USB 2 (Philips FM1216ME)   (em2820/em2840)
+ 28 -> Leadtek Winfast USB II Deluxe            (em2820/em2840)
+ 29 -> Pinnacle Dazzle DVC 100                  (em2820/em2840)
+ 30 -> Videology 20K14XUSB USB2.0               (em2820/em2840)
+ 31 -> Usbgear VD204v9                          (em2821)
+ 32 -> Supercomp USB 2.0 TV                     (em2821)
+ 33 -> SIIG AVTuner-PVR/Prolink PlayTV USB 2.0  (em2821)
+ 34 -> Terratec Cinergy A Hybrid XS             (em2860)        [0ccd:004f]
+ 35 -> Typhoon DVD Maker                        (em2860)
+ 36 -> NetGMBH Cam                              (em2860)
+ 37 -> Gadmei UTV330                            (em2860)
+ 38 -> Yakumo MovieMixer                        (em2861)
+ 39 -> KWorld PVRTV 300U                        (em2861)        [eb1a:e300]
+ 40 -> Plextor ConvertX PX-TV100U               (em2861)        [093b:a005]
+ 41 -> Kworld 350 U DVB-T                       (em2870)        [eb1a:e350]
+ 42 -> Kworld 355 U DVB-T                       (em2870)        [eb1a:e355,eb1a:e357]
+ 43 -> Terratec Cinergy T XS                    (em2870)        [0ccd:0043]
+ 44 -> Terratec Cinergy T XS (MT2060)           (em2870)
+ 45 -> Pinnacle PCTV DVB-T                      (em2870)
+ 46 -> Compro, VideoMate U3                     (em2870)        [185b:2870]
+ 47 -> KWorld DVB-T 305U                        (em2880)        [eb1a:e305]
+ 48 -> KWorld DVB-T 310U                        (em2880)
+ 49 -> MSI DigiVox A/D                          (em2880)        [eb1a:e310]
+ 50 -> MSI DigiVox A/D II                       (em2880)        [eb1a:e320]
+ 51 -> Terratec Hybrid XS Secam                 (em2880)        [0ccd:004c]
+ 52 -> DNT DA2 Hybrid                           (em2881)
+ 53 -> Pinnacle Hybrid Pro                      (em2881)
+ 54 -> Kworld VS-DVB-T 323UR                    (em2882)        [eb1a:e323]
+ 55 -> Terratec Hybrid XS (em2882)              (em2882)        [0ccd:005e]
+ 56 -> Pinnacle Hybrid Pro (2)                  (em2882)        [2304:0226]
+ 57 -> Kworld PlusTV HD Hybrid 330              (em2883)        [eb1a:a316]
+ 58 -> Compro VideoMate ForYou/Stereo           (em2820/em2840) [185b:2041]
diff --git a/Documentation/video4linux/Makefile b/Documentation/video4linux/Makefile
new file mode 100644
index 000000000000..1ed0e98d057d
--- /dev/null
+++ b/Documentation/video4linux/Makefile
@@ -0,0 +1,8 @@
+# kbuild trick to avoid linker error. Can be omitted if a module is built.
+obj- := dummy.o
+
+# List of programs to build
+hostprogs-y := v4lgrab
+
+# Tell kbuild to always build the programs
+always := $(hostprogs-y)
diff --git a/Documentation/video4linux/gspca.txt b/Documentation/video4linux/gspca.txt
index 0c4880af57a3..78a863ab8a5a 100644
--- a/Documentation/video4linux/gspca.txt
+++ b/Documentation/video4linux/gspca.txt
@@ -1,4 +1,4 @@
-List of the webcams know by gspca.
+List of the webcams known by gspca.
 
 The modules are:
 	gspca_main	main driver
@@ -226,6 +226,7 @@ sonixj		0c45:6130	Sonix Pccam
 sonixj		0c45:6138	Sn9c120 Mo4000
 sonixj		0c45:613b	Surfer SN-206
 sonixj		0c45:613c	Sonix Pccam168
+sonixj		0c45:6143	Sonix Pccam168
 sunplus		0d64:0303	Sunplus FashionCam DXG
 etoms		102c:6151	Qcam Sangha CIF
 etoms		102c:6251	Qcam xxxxxx VGA
diff --git a/Documentation/video4linux/sn9c102.txt b/Documentation/video4linux/sn9c102.txt
index b26f5195af51..73de4050d637 100644
--- a/Documentation/video4linux/sn9c102.txt
+++ b/Documentation/video4linux/sn9c102.txt
@@ -157,7 +157,7 @@ Loading can be done as shown below:
 
 	[root@localhost home]# modprobe sn9c102
 
-Note that the module is called "sn9c102" for historic reasons, althought it
+Note that the module is called "sn9c102" for historic reasons, although it
 does not just support the SN9C102.
 
 At this point all the devices supported by the driver and connected to the USB
diff --git a/Documentation/vm/Makefile b/Documentation/vm/Makefile
new file mode 100644
index 000000000000..6f562f778b28
--- /dev/null
+++ b/Documentation/vm/Makefile
@@ -0,0 +1,8 @@
+# kbuild trick to avoid linker error. Can be omitted if a module is built.
+obj- := dummy.o
+
+# List of programs to build
+hostprogs-y := slabinfo
+
+# Tell kbuild to always build the programs
+always := $(hostprogs-y)
diff --git a/Documentation/vm/hugetlbpage.txt b/Documentation/vm/hugetlbpage.txt
index 8a5b5763f0fe..ea8714fcc3ad 100644
--- a/Documentation/vm/hugetlbpage.txt
+++ b/Documentation/vm/hugetlbpage.txt
@@ -77,7 +77,7 @@ memory that is preset in system at this time.  System administrators may want
 to put this command in one of the local rc init files.  This will enable the
 kernel to request huge pages early in the boot process (when the possibility
 of getting physical contiguous pages is still very high). In either
-case, adminstrators will want to verify the number of hugepages actually
+case, administrators will want to verify the number of hugepages actually
 allocated by checking the sysctl or meminfo.
 
 /proc/sys/vm/nr_overcommit_hugepages indicates how large the pool of
diff --git a/Documentation/vm/numa_memory_policy.txt b/Documentation/vm/numa_memory_policy.txt
index bad16d3f6a47..6aaaeb38730c 100644
--- a/Documentation/vm/numa_memory_policy.txt
+++ b/Documentation/vm/numa_memory_policy.txt
@@ -58,7 +58,7 @@ most general to most specific:
 	the policy at the time they were allocated.
 
     VMA Policy:  A "VMA" or "Virtual Memory Area" refers to a range of a task's
-    virtual adddress space.  A task may define a specific policy for a range
+    virtual address space.  A task may define a specific policy for a range
     of its virtual address space.   See the MEMORY POLICIES APIS section,
     below, for an overview of the mbind() system call used to set a VMA
     policy.
@@ -353,7 +353,7 @@ follows:
 
    Because of this extra reference counting, and because we must lookup
    shared policies in a tree structure under spinlock, shared policies are
-   more expensive to use in the page allocation path.  This is expecially
+   more expensive to use in the page allocation path.  This is especially
    true for shared policies on shared memory regions shared by tasks running
    on different NUMA nodes.  This extra overhead can be avoided by always
    falling back to task or system default policy for shared memory regions,
diff --git a/Documentation/vm/page_migration b/Documentation/vm/page_migration
index 99f89aa10169..d5fdfd34bbaf 100644
--- a/Documentation/vm/page_migration
+++ b/Documentation/vm/page_migration
@@ -18,10 +18,11 @@ migrate_pages function call takes two sets of nodes and moves pages of a
 process that are located on the from nodes to the destination nodes.
 Page migration functions are provided by the numactl package by Andi Kleen
 (a version later than 0.9.3 is required. Get it from
-ftp://ftp.suse.com/pub/people/ak). numactl provided libnuma which
-provides an interface similar to other numa functionality for page migration.
-cat /proc/<pid>/numa_maps allows an easy review of where the pages of
-a process are located. See also the numa_maps manpage in the numactl package.
+ftp://oss.sgi.com/www/projects/libnuma/download/). numactl provides libnuma
+which provides an interface similar to other numa functionality for page
+migration.  cat /proc/<pid>/numa_maps allows an easy review of where the
+pages of a process are located. See also the numa_maps documentation in the
+proc(5) man page.
 
 Manual migration is useful if for example the scheduler has relocated
 a process to a processor on a distant node. A batch scheduler or an
diff --git a/Documentation/volatile-considered-harmful.txt b/Documentation/volatile-considered-harmful.txt
index 10c2e411cca8..991c26a6ef64 100644
--- a/Documentation/volatile-considered-harmful.txt
+++ b/Documentation/volatile-considered-harmful.txt
@@ -114,6 +114,6 @@ CREDITS
 
 Original impetus and research by Randy Dunlap
 Written by Jonathan Corbet
-Improvements via coments from Satyam Sharma, Johannes Stezenbach, Jesper
+Improvements via comments from Satyam Sharma, Johannes Stezenbach, Jesper
 	Juhl, Heikki Orsila, H. Peter Anvin, Philipp Hahn, and Stefan
 	Richter.
diff --git a/Documentation/watchdog/src/Makefile b/Documentation/watchdog/src/Makefile
new file mode 100644
index 000000000000..40e5f46e4740
--- /dev/null
+++ b/Documentation/watchdog/src/Makefile
@@ -0,0 +1,8 @@
+# kbuild trick to avoid linker error. Can be omitted if a module is built.
+obj- := dummy.o
+
+# List of programs to build
+hostprogs-y := watchdog-simple watchdog-test
+
+# Tell kbuild to always build the programs
+always := $(hostprogs-y)
diff --git a/Kbuild b/Kbuild
index e750e9c3fe59..f056b4feee51 100644
--- a/Kbuild
+++ b/Kbuild
@@ -43,7 +43,7 @@ $(obj)/$(bounds-file): kernel/bounds.s Kbuild
 # 2) Generate asm-offsets.h
 #
 
-offsets-file := include/asm-$(SRCARCH)/asm-offsets.h
+offsets-file := include/asm/asm-offsets.h
 
 always  += $(offsets-file)
 targets += $(offsets-file)
@@ -81,7 +81,6 @@ arch/$(SRCARCH)/kernel/asm-offsets.s: arch/$(SRCARCH)/kernel/asm-offsets.c \
 	$(call if_changed_dep,cc_s_c)
 
 $(obj)/$(offsets-file): arch/$(SRCARCH)/kernel/asm-offsets.s Kbuild
-	$(Q)mkdir -p $(dir $@)
 	$(call cmd,offsets)
 
 #####
diff --git a/MAINTAINERS b/MAINTAINERS
index be05ef9b7b42..ced3c202f8e6 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -175,12 +175,18 @@ M:	bcrl@kvack.org
 L:	linux-aio@kvack.org
 S:	Supported
 
-ABIT UGURU HARDWARE MONITOR DRIVER
+ABIT UGURU 1,2 HARDWARE MONITOR DRIVER
 P:	Hans de Goede
 M:	j.w.r.degoede@hhs.nl
 L:	lm-sensors@lm-sensors.org
 S:	Maintained
 
+ABIT UGURU 3 HARDWARE MONITOR DRIVER
+P:	Alistair John Strachan
+M:	alistair@devzero.co.uk
+L:	lm-sensors@lm-sensors.org
+S:	Maintained
+
 ACENIC DRIVER
 P:	Jes Sorensen
 M:	jes@trained-monkey.org
@@ -413,6 +419,12 @@ L:	linux-laptop@vger.kernel.org
 W:	http://www.canb.auug.org.au/~sfr/
 S:	Supported
 
+APPLE BCM5974 MULTITOUCH DRIVER
+P:	Henrik Rydberg
+M:	rydberg@euromail.se
+L:	linux-input@vger.kernel.org
+S:	Maintained
+
 APPLE SMC DRIVER
 P:	Nicolas Boichat
 M:	nicolas@boichat.ch
@@ -502,6 +514,12 @@ L:	openezx-devel@lists.openezx.org (subscribers-only)
 W:	http://www.openezx.org/
 S:	Maintained
 
+ARM/FREESCALE IMX / MXC ARM ARCHITECTURE
+P:	Sascha Hauer
+M:	kernel@pengutronix.de
+L:	linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
+S:	Maintained
+
 ARM/GLOMATION GESBC9312SX MACHINE SUPPORT
 P:	Lennert Buytenhek
 M:	kernel@wantstofly.org
@@ -588,6 +606,11 @@ M:	kernel@wantstofly.org
 L:	linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
 S:	Maintained
 
+ARM/MAGICIAN MACHINE SUPPORT
+P:	Philipp Zabel
+M:	philipp.zabel@gmail.com
+S:	Maintained
+
 ARM/TOSA MACHINE SUPPORT
 P:	Dmitry Baryshkov
 M:	dbaryshkov@gmail.com
@@ -714,6 +737,15 @@ L:	linux-wireless@vger.kernel.org
 L:	ath5k-devel@lists.ath5k.org
 S:	Maintained
 
+ATHEROS ATH9K WIRELESS DRIVER
+P:	Luis R. Rodriguez
+M:	lrodriguez@atheros.com
+P:	Jouni Malinen
+M:	jmalinen@atheros.com
+L:	linux-wireless@vger.kernel.org
+L:	ath9k-devel@lists.ath9k.org
+S:	Supported
+
 ATI_REMOTE2 DRIVER
 P:	Ville Syrjala
 M:	syrjala@sci.fi
@@ -916,94 +948,19 @@ M:	joern@lazybastard.org
 L:	linux-mtd@lists.infradead.org
 S:	Maintained
 
-BLUETOOTH SUBSYSTEM
+BLUETOOTH DRIVERS
 P:	Marcel Holtmann
 M:	marcel@holtmann.org
-P:	Maxim Krasnyansky
-M:	maxk@qualcomm.com
 L:	linux-bluetooth@vger.kernel.org
-W:	http://bluez.sf.net
-W:	http://www.bluez.org
-W:	http://www.holtmann.org/linux/bluetooth/
-T:	git kernel.org:/pub/scm/linux/kernel/git/holtmann/bluetooth-2.6.git
-S:	Maintained
-
-BLUETOOTH RFCOMM LAYER
-P:	Marcel Holtmann
-M:	marcel@holtmann.org
-P:	Maxim Krasnyansky
-M:	maxk@qualcomm.com
+W:	http://www.bluez.org/
 S:	Maintained
 
-BLUETOOTH BNEP LAYER
-P:	Marcel Holtmann
-M:	marcel@holtmann.org
-P:	Maxim Krasnyansky
-M:	maxk@qualcomm.com
-S:	Maintained
-
-BLUETOOTH CMTP LAYER
-P:	Marcel Holtmann
-M:	marcel@holtmann.org
-S:	Maintained
-
-BLUETOOTH HIDP LAYER
-P:	Marcel Holtmann
-M:	marcel@holtmann.org
-S:	Maintained
-
-BLUETOOTH HCI UART DRIVER
-P:	Marcel Holtmann
-M:	marcel@holtmann.org
-P:	Maxim Krasnyansky
-M:	maxk@qualcomm.com
-S:	Maintained
-
-BLUETOOTH HCI USB DRIVER
-P:	Marcel Holtmann
-M:	marcel@holtmann.org
-P:	Maxim Krasnyansky
-M:	maxk@qualcomm.com
-S:	Maintained
-
-BLUETOOTH HCI BCM203X DRIVER
-P:	Marcel Holtmann
-M:	marcel@holtmann.org
-S:	Maintained
-
-BLUETOOTH HCI BPA10X DRIVER
-P:	Marcel Holtmann
-M:	marcel@holtmann.org
-S:	Maintained
-
-BLUETOOTH HCI BFUSB DRIVER
-P:	Marcel Holtmann
-M:	marcel@holtmann.org
-S:	Maintained
-
-BLUETOOTH HCI DTL1 DRIVER
-P:	Marcel Holtmann
-M:	marcel@holtmann.org
-S:	Maintained
-
-BLUETOOTH HCI BLUECARD DRIVER
-P:	Marcel Holtmann
-M:	marcel@holtmann.org
-S:	Maintained
-
-BLUETOOTH HCI BT3C DRIVER
-P:	Marcel Holtmann
-M:	marcel@holtmann.org
-S:	Maintained
-
-BLUETOOTH HCI BTUART DRIVER
+BLUETOOTH SUBSYSTEM
 P:	Marcel Holtmann
 M:	marcel@holtmann.org
-S:	Maintained
-
-BLUETOOTH HCI VHCI DRIVER
-P:	Maxim Krasnyansky
-M:	maxk@qualcomm.com
+L:	linux-bluetooth@vger.kernel.org
+W:	http://www.bluez.org/
+T:	git kernel.org:/pub/scm/linux/kernel/git/holtmann/bluetooth-2.6.git
 S:	Maintained
 
 BONDING DRIVER
@@ -1043,6 +1000,12 @@ M:	fujita.tomonori@lab.ntt.co.jp
 L:	linux-scsi@vger.kernel.org
 S:	Supported
 
+BT8XXGPIO DRIVER
+P:	Michael Buesch
+M:	mb@bu3sch.de
+W:	http://bu3sch.de/btgpio.php
+S:	Maintained
+
 BTTV VIDEO4LINUX DRIVER
 P:	Mauro Carvalho Chehab
 M:	mchehab@infradead.org
@@ -1223,7 +1186,7 @@ S:	Maintained
 CPU FREQUENCY DRIVERS
 P:	Dave Jones
 M:	davej@codemonkey.org.uk
-L:	cpufreq@lists.linux.org.uk
+L:	cpufreq@vger.kernel.org
 W:	http://www.codemonkey.org.uk/projects/cpufreq/
 T:	git kernel.org/pub/scm/linux/kernel/git/davej/cpufreq.git
 S:	Maintained
@@ -1872,13 +1835,9 @@ W:	http://gigaset307x.sourceforge.net/
 S:	Maintained
 
 HARDWARE MONITORING
-P:	Mark M. Hoffman
-M:	mhoffman@lightlink.com
 L:	lm-sensors@lm-sensors.org
 W:	http://www.lm-sensors.org/
-T:	git lm-sensors.org:/kernel/mhoffman/hwmon-2.6.git testing
-T:	git lm-sensors.org:/kernel/mhoffman/hwmon-2.6.git release
-S:	Maintained
+S:	Orphaned
 
 HARDWARE RANDOM NUMBER GENERATOR CORE
 S:	Orphaned
@@ -2440,7 +2399,7 @@ L:	kernel-janitors@vger.kernel.org
 W:	http://www.kerneljanitors.org/
 S:	Maintained
 
-KERNEL NFSD
+KERNEL NFSD, SUNRPC, AND LOCKD SERVERS
 P:	J. Bruce Fields
 M:	bfields@fieldses.org
 P:	Neil Brown
@@ -2906,6 +2865,12 @@ M:	jirislaby@gmail.com
 L:	linux-kernel@vger.kernel.org
 S:	Maintained
 
+MUSB MULTIPOINT HIGH SPEED DUAL-ROLE CONTROLLER
+P:     Felipe Balbi
+M:     felipe.balbi@nokia.com
+L:     linux-usb@vger.kernel.org
+S:     Maintained
+
 MYRICOM MYRI-10G 10GbE DRIVER (MYRI10GE)
 P:	Andrew Gallatin
 M:	gallatin@myri.com
@@ -3054,9 +3019,10 @@ M:	horms@verge.net.au
 P:	Julian Anastasov
 M:	ja@ssi.bg
 L:	netdev@vger.kernel.org
+L:	lvs-devel@vger.kernel.org
 S:	Maintained
 
-NFS CLIENT
+NFS, SUNRPC, AND LOCKD CLIENTS
 P:	Trond Myklebust
 M:	Trond.Myklebust@netapp.com
 L:	linux-nfs@vger.kernel.org
@@ -3091,7 +3057,7 @@ P:	Anton Altaparmakov
 M:	aia21@cantab.net
 L:	linux-ntfs-dev@lists.sourceforge.net
 L:	linux-kernel@vger.kernel.org
-W:	http://linux-ntfs.sf.net/
+W:	http://www.linux-ntfs.org/
 T:	git kernel.org:/pub/scm/linux/kernel/git/aia21/ntfs-2.6.git
 S:	Maintained
 
@@ -3117,6 +3083,12 @@ W:	http://oss.oracle.com/projects/ocfs2/
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/mfasheh/ocfs2.git
 S:	Supported
 
+OMFS FILESYSTEM
+P:	Bob Copeland
+M:	me@bobcopeland.com
+L:	linux-karma-devel@lists.sourceforge.net
+S:	Maintained
+
 OMNIKEY CARDMAN 4000 DRIVER
 P:	Harald Welte
 M:	laforge@gnumonks.org
@@ -3713,6 +3685,16 @@ L:	linux-visws-devel@lists.sf.net
 W:	http://linux-visws.sf.net
 S:	Maintained for 2.6.
 
+SGI GRU DRIVER
+P:	Jack Steiner
+M:	steiner@sgi.com
+S:	Maintained
+
+SGI XP/XPC/XPNET DRIVER
+P:	Dean Nelson
+M:	dcn@sgi.com
+S:	Maintained
+
 SIMTEC EB110ATX (Chalice CATS)
 P:	Ben Dooks
 P:	Vincent Sanders
@@ -3784,6 +3766,12 @@ P:	Ben Nizette
 M:	bn@niasdigital.com
 S:	Maintained
 
+SOC-CAMERA V4L2 SUBSYSTEM
+P:     Guennadi Liakhovetski
+M:     g.liakhovetski@gmx.de
+L:     video4linux-list@redhat.com
+S:     Maintained
+
 SOFTWARE RAID (Multiple Disks) SUPPORT
 P:	Ingo Molnar
 M:	mingo@redhat.com
@@ -3950,7 +3938,7 @@ M:	lethal@linux-sh.org
 L:	linux-sh@vger.kernel.org
 W:	http://www.linux-sh.org
 T:	git kernel.org:/pub/scm/linux/kernel/git/lethal/sh-2.6.git
-S:	Maintained
+S:	Supported
 
 SUN3/3X
 P:	Sam Creasey
@@ -4023,7 +4011,7 @@ S:      Maintained
 
 TI OMAP MMC INTERFACE DRIVER
 P:	Carlos Aguiar, Anderson Briglia and Syed Khasim
-M:	linux-omap-open-source@linux.omap.com (subscribers only)
+M:	linux-omap@vger.kernel.org
 W:	http://linux.omap.com
 W:	http://www.muru.com/linux/omap/
 S:	Maintained
@@ -4161,12 +4149,6 @@ M:	oliver@neukum.name
 L:	linux-usb@vger.kernel.org
 S:	Maintained
 
-USB AUERSWALD DRIVER
-P:	Wolfgang Muees
-M:	wolfgang@iksw-muees.de
-L:      linux-usb@vger.kernel.org
-S:	Maintained
-
 USB BLOCK DRIVER (UB ub)
 P:	Pete Zaitcev
 M:	zaitcev@redhat.com
@@ -4486,6 +4468,15 @@ M:	kaber@trash.net
 L:	netdev@vger.kernel.org
 S:	Maintained
 
+VOLTAGE AND CURRENT REGULATOR FRAMEWORK
+P:	Liam Girdwood
+M:	lg@opensource.wolfsonmicro.com
+P:	Mark Brown
+M:	broonie@opensource.wolfsonmicro.com
+W:	http://opensource.wolfsonmicro.com/node/15
+T:	git kernel.org/pub/scm/linux/kernel/git/lrg/voltage-2.6.git
+S:	Supported
+
 VT1211 HARDWARE MONITOR DRIVER
 P:	Juerg Haefliger
 M:	juergh@gmail.com
@@ -4640,12 +4631,6 @@ L:	linux-wireless@vger.kernel.org
 L:	zd1211-devs@lists.sourceforge.net (subscribers-only)
 S:	Maintained
 
-ZF MACHZ WATCHDOG
-P:	Fernando Fuganti
-M:	fuganti@netbank.com.br
-W:	http://cvs.conectiva.com.br/drivers/ZFL-watchdog/
-S:	Maintained
-
 ZR36067 VIDEO FOR LINUX DRIVER
 P:	Ronald Bultje
 M:	rbultje@ronald.bitfreak.net
diff --git a/Makefile b/Makefile
index 4bcd1cf90cb1..f448e0082ebf 100644
--- a/Makefile
+++ b/Makefile
@@ -1,7 +1,7 @@
 VERSION = 2
 PATCHLEVEL = 6
-SUBLEVEL = 26
-EXTRAVERSION =
+SUBLEVEL = 27
+EXTRAVERSION = -rc5
 NAME = Rotary Wombat
 
 # *DOCUMENTATION*
@@ -205,6 +205,13 @@ ifeq ($(ARCH),x86_64)
         SRCARCH := x86
 endif
 
+# Where to locate arch specific headers
+ifeq ($(ARCH),sparc64)
+       hdr-arch  := sparc
+else
+       hdr-arch  := $(SRCARCH)
+endif
+
 KCONFIG_CONFIG	?= .config
 
 # SHELL used by kbuild
@@ -326,7 +333,8 @@ AFLAGS_KERNEL	=
 # Needed to be compatible with the O= option
 LINUXINCLUDE    := -Iinclude \
                    $(if $(KBUILD_SRC),-Iinclude2 -I$(srctree)/include) \
-		   -include include/linux/autoconf.h
+                   -I$(srctree)/arch/$(hdr-arch)/include               \
+                   -include include/linux/autoconf.h
 
 KBUILD_CPPFLAGS := -D__KERNEL__ $(LINUXINCLUDE)
 
@@ -814,6 +822,9 @@ endif
 ifdef CONFIG_SAMPLES
 	$(Q)$(MAKE) $(build)=samples
 endif
+ifdef CONFIG_BUILD_DOCSRC
+	$(Q)$(MAKE) $(build)=Documentation
+endif
 	$(call vmlinux-modpost)
 	$(call if_changed_rule,vmlinux__)
 	$(Q)rm -f .old_version
@@ -921,8 +932,10 @@ ifneq ($(KBUILD_SRC),)
 		echo "  in the '$(srctree)' directory.";\
 		/bin/false; \
 	fi;
-	$(Q)if [ ! -d include2 ]; then mkdir -p include2; fi;
-	$(Q)ln -fsn $(srctree)/include/asm-$(SRCARCH) include2/asm
+	$(Q)if [ ! -d include2 ]; then                                  \
+	    mkdir -p include2;                                          \
+	    ln -fsn $(srctree)/include/asm-$(SRCARCH) include2/asm;     \
+	fi
 endif
 
 # prepare2 creates a makefile if using a separate output directory
@@ -948,22 +961,34 @@ export CPPFLAGS_vmlinux.lds += -P -C -U$(ARCH)
 
 # The asm symlink changes when $(ARCH) changes.
 # Detect this and ask user to run make mrproper
-
-include/asm: FORCE
-	$(Q)set -e; asmlink=`readlink include/asm | cut -d '-' -f 2`;   \
-	if [ -L include/asm ]; then                                     \
-		if [ "$$asmlink" != "$(SRCARCH)" ]; then                \
+define check-symlink
+	set -e;                                                            \
+	if [ -L include/asm ]; then                                        \
+		asmlink=`readlink include/asm | cut -d '-' -f 2`;          \
+		if [ "$$asmlink" != "$(SRCARCH)" ]; then                   \
 			echo "ERROR: the symlink $@ points to asm-$$asmlink but asm-$(SRCARCH) was expected"; \
 			echo "       set ARCH or save .config and run 'make mrproper' to fix it";             \
-			exit 1;                                         \
-		fi;                                                     \
-	else                                                            \
-		echo '  SYMLINK $@ -> include/asm-$(SRCARCH)';          \
-		if [ ! -d include ]; then                               \
-			mkdir -p include;                               \
-		fi;                                                     \
-		ln -fsn asm-$(SRCARCH) $@;                              \
+			exit 1;                                            \
+		fi;                                                        \
 	fi
+endef
+
+# We create the target directory of the symlink if it does
+# not exist so the test in chack-symlink works and we have a
+# directory for generated filesas used by some architectures.
+define create-symlink
+	if [ ! -L include/asm ]; then                                      \
+			echo '  SYMLINK $@ -> include/asm-$(SRCARCH)';     \
+			if [ ! -d include/asm-$(SRCARCH) ]; then           \
+				mkdir -p include/asm-$(SRCARCH);           \
+			fi;                                                \
+			ln -fsn asm-$(SRCARCH) $@;                         \
+	fi
+endef
+
+include/asm: FORCE
+	$(Q)$(check-symlink)
+	$(Q)$(create-symlink)
 
 # Generate some files
 # ---------------------------------------------------------------------------
@@ -1010,36 +1035,43 @@ firmware_install: FORCE
 
 # ---------------------------------------------------------------------------
 # Kernel headers
-INSTALL_HDR_PATH=$(objtree)/usr
-export INSTALL_HDR_PATH
 
-HDRFILTER=generic i386 x86_64
-HDRARCHES=$(filter-out $(HDRFILTER),$(patsubst $(srctree)/include/asm-%/Kbuild,%,$(wildcard $(srctree)/include/asm-*/Kbuild)))
+#Default location for installed headers
+export INSTALL_HDR_PATH = $(objtree)/usr
 
-PHONY += headers_install_all
-headers_install_all: include/linux/version.h scripts_basic FORCE
+hdr-inst := -rR -f $(srctree)/scripts/Makefile.headersinst obj
+# Find out where the Kbuild file is located to support
+# arch/$(ARCH)/include/asm
+hdr-dir = $(strip                                                         \
+          $(if $(wildcard $(srctree)/arch/$(hdr-arch)/include/asm/Kbuild), \
+               arch/$(hdr-arch)/include/asm, include/asm-$(hdr-arch)))
+
+# If we do an all arch process set dst to asm-$(hdr-arch)
+hdr-dst = $(if $(KBUILD_HEADERS), dst=include/asm-$(hdr-arch), dst=include/asm)
+
+PHONY += __headers
+__headers: include/linux/version.h scripts_basic FORCE
 	$(Q)$(MAKE) $(build)=scripts scripts/unifdef
-	$(Q)for arch in $(HDRARCHES); do \
-	 $(MAKE) ARCH=$$arch -f $(srctree)/scripts/Makefile.headersinst obj=include BIASMDIR=-bi-$$arch ;\
-	 done
+
+PHONY += headers_install_all
+headers_install_all:
+	$(Q)$(CONFIG_SHELL) $(srctree)/scripts/headers.sh install
 
 PHONY += headers_install
-headers_install: include/linux/version.h scripts_basic FORCE
-	@if [ ! -r $(srctree)/include/asm-$(SRCARCH)/Kbuild ]; then \
-	  echo '*** Error: Headers not exportable for this architecture ($(SRCARCH))'; \
-	  exit 1 ; fi
-	$(Q)$(MAKE) $(build)=scripts scripts/unifdef
-	$(Q)$(MAKE) -f $(srctree)/scripts/Makefile.headersinst ARCH=$(SRCARCH) obj=include
+headers_install: __headers
+	$(if $(wildcard $(srctree)/$(hdr-dir)/Kbuild),, \
+	$(error Headers not exportable for the $(SRCARCH) architecture))
+	$(Q)$(MAKE) $(hdr-inst)=include
+	$(Q)$(MAKE) $(hdr-inst)=$(hdr-dir) $(hdr-dst)
 
 PHONY += headers_check_all
 headers_check_all: headers_install_all
-	$(Q)for arch in $(HDRARCHES); do \
-	 $(MAKE) ARCH=$$arch -f $(srctree)/scripts/Makefile.headersinst obj=include BIASMDIR=-bi-$$arch HDRCHECK=1 ;\
-	 done
+	$(Q)$(CONFIG_SHELL) $(srctree)/scripts/headers.sh check
 
 PHONY += headers_check
 headers_check: headers_install
-	$(Q)$(MAKE) -f $(srctree)/scripts/Makefile.headersinst ARCH=$(SRCARCH) obj=include HDRCHECK=1
+	$(Q)$(MAKE) $(hdr-inst)=include HDRCHECK=1
+	$(Q)$(MAKE) $(hdr-inst)=$(hdr-dir) $(hdr-dst) HDRCHECK=1
 
 # ---------------------------------------------------------------------------
 # Modules
@@ -1061,6 +1093,7 @@ modules: $(vmlinux-dirs) $(if $(KBUILD_BUILTIN),vmlinux)
 	$(Q)$(AWK) '!x[$$0]++' $(vmlinux-dirs:%=$(objtree)/%/modules.order) > $(objtree)/modules.order
 	@echo '  Building modules, stage 2.';
 	$(Q)$(MAKE) -f $(srctree)/scripts/Makefile.modpost
+	$(Q)$(MAKE) -f $(srctree)/scripts/Makefile.fwinst obj=firmware __fw_modbuild
 
 
 # Target to prepare building external modules
@@ -1130,13 +1163,13 @@ MRPROPER_FILES += .config .config.old include/asm .version .old_version \
                   include/linux/autoconf.h include/linux/version.h      \
                   include/linux/utsrelease.h                            \
                   include/linux/bounds.h include/asm*/asm-offsets.h     \
-		  Module.symvers tags TAGS cscope*
+		  Module.symvers Module.markers tags TAGS cscope*
 
 # clean - Delete most, but leave enough to build external modules
 #
 clean: rm-dirs  := $(CLEAN_DIRS)
 clean: rm-files := $(CLEAN_FILES)
-clean-dirs      := $(addprefix _clean_,$(srctree) $(vmlinux-alldirs))
+clean-dirs      := $(addprefix _clean_,$(srctree) $(vmlinux-alldirs) Documentation)
 
 PHONY += $(clean-dirs) clean archclean
 $(clean-dirs):
@@ -1149,7 +1182,7 @@ clean: archclean $(clean-dirs)
 		\( -name '*.[oas]' -o -name '*.ko' -o -name '.*.cmd' \
 		-o -name '.*.d' -o -name '.*.tmp' -o -name '*.mod.c' \
 		-o -name '*.symtypes' -o -name 'modules.order' \
-		-o -name 'Module.markers' \) \
+		-o -name 'Module.markers' -o -name '.tmp_*.o.*' \) \
 		-type f -print | xargs rm -f
 
 # mrproper - Delete all generated files, including .config
@@ -1223,21 +1256,17 @@ help:
 	@echo  '  cscope	  - Generate cscope index'
 	@echo  '  kernelrelease	  - Output the release version string'
 	@echo  '  kernelversion	  - Output the version stored in Makefile'
-	@if [ -r $(srctree)/include/asm-$(SRCARCH)/Kbuild ]; then \
-	 echo  '  headers_install - Install sanitised kernel headers to INSTALL_HDR_PATH'; \
+	@echo  '  headers_install - Install sanitised kernel headers to INSTALL_HDR_PATH'; \
 	 echo  '                    (default: $(INSTALL_HDR_PATH))'; \
-	 fi
-	@echo  ''
+	 echo  ''
 	@echo  'Static analysers'
 	@echo  '  checkstack      - Generate a list of stack hogs'
 	@echo  '  namespacecheck  - Name space analysis on compiled kernel'
 	@echo  '  versioncheck    - Sanity check on version.h usage'
 	@echo  '  includecheck    - Check for duplicate included header files'
 	@echo  '  export_report   - List the usages of all exported symbols'
-	@if [ -r $(srctree)/include/asm-$(SRCARCH)/Kbuild ]; then \
-	 echo  '  headers_check   - Sanity check on exported headers'; \
-	 fi
-	@echo  ''
+	@echo  '  headers_check   - Sanity check on exported headers'; \
+	 echo  ''
 	@echo  'Kernel packaging:'
 	@$(MAKE) $(build)=$(package-dir) help
 	@echo  ''
@@ -1410,7 +1439,11 @@ define find-sources
 	       \( -name config -o -name 'asm-*' \) -prune \
 	       -o -name $1 -print; \
 	  for arch in $(ALLINCLUDE_ARCHS) ; do \
-	       find $(__srctree)include/asm-$${arch} $(RCS_FIND_IGNORE) \
+	       test -e $(__srctree)include/asm-$${arch} && \
+                 find $(__srctree)include/asm-$${arch} $(RCS_FIND_IGNORE) \
+	            -name $1 -print; \
+	       test -e $(__srctree)arch/$${arch}/include/asm && \
+	         find $(__srctree)arch/$${arch}/include/asm $(RCS_FIND_IGNORE) \
 	            -name $1 -print; \
 	  done ; \
 	  find $(__srctree)include/asm-generic $(RCS_FIND_IGNORE) \
@@ -1462,7 +1495,7 @@ quiet_cmd_cscope-file = FILELST cscope.files
       cmd_cscope-file = (echo \-k; echo \-q; $(all-sources)) > cscope.files
 
 quiet_cmd_cscope = MAKE    cscope.out
-      cmd_cscope = cscope -b
+      cmd_cscope = cscope -b -f cscope.out
 
 cscope: FORCE
 	$(call cmd,cscope-file)
diff --git a/arch/Kconfig b/arch/Kconfig
index 6093c0be58b0..364c6dadde0a 100644
--- a/arch/Kconfig
+++ b/arch/Kconfig
@@ -27,6 +27,25 @@ config KPROBES
 	  for kernel debugging, non-intrusive instrumentation and testing.
 	  If in doubt, say "N".
 
+config HAVE_EFFICIENT_UNALIGNED_ACCESS
+	def_bool n
+	help
+	  Some architectures are unable to perform unaligned accesses
+	  without the use of get_unaligned/put_unaligned. Others are
+	  unable to perform such accesses efficiently (e.g. trap on
+	  unaligned access and require fixing it up in the exception
+	  handler.)
+
+	  This symbol should be selected by an architecture if it can
+	  perform unaligned accesses efficiently to allow different
+	  code paths to be selected for these cases. Some network
+	  drivers, for example, could opt to not fix up alignment
+	  problems with received packets if doing so would not help
+	  much.
+
+	  See Documentation/unaligned-memory-access.txt for more
+	  information on the topic of unaligned memory accesses.
+
 config KRETPROBES
 	def_bool y
 	depends on KPROBES && HAVE_KRETPROBES
@@ -40,6 +59,24 @@ config HAVE_KPROBES
 config HAVE_KRETPROBES
 	def_bool n
 
+#
+# An arch should select this if it provides all these things:
+#
+#	task_pt_regs()		in asm/processor.h or asm/ptrace.h
+#	arch_has_single_step()	if there is hardware single-step support
+#	arch_has_block_step()	if there is hardware block-step support
+#	arch_ptrace()		and not #define __ARCH_SYS_PTRACE
+#	compat_arch_ptrace()	and #define __ARCH_WANT_COMPAT_SYS_PTRACE
+#	asm/syscall.h		supplying asm-generic/syscall.h interface
+#	linux/regset.h		user_regset interfaces
+#	CORE_DUMP_USE_REGSET	#define'd in linux/elf.h
+#	TIF_SYSCALL_TRACE	calls tracehook_report_syscall_{entry,exit}
+#	TIF_NOTIFY_RESUME	calls tracehook_notify_resume()
+#	signal delivery		calls tracehook_signal_handler()
+#
+config HAVE_ARCH_TRACEHOOK
+	def_bool n
+
 config HAVE_DMA_ATTRS
 	def_bool n
 
diff --git a/arch/alpha/boot/misc.c b/arch/alpha/boot/misc.c
index c00646b25f6e..3047a1b3a517 100644
--- a/arch/alpha/boot/misc.c
+++ b/arch/alpha/boot/misc.c
@@ -78,8 +78,6 @@ static unsigned outcnt;		/* bytes in output buffer */
 static int  fill_inbuf(void);
 static void flush_window(void);
 static void error(char *m);
-static void gzip_mark(void **);
-static void gzip_release(void **);
 
 static char *input_data;
 static int  input_data_size;
@@ -88,51 +86,18 @@ static uch *output_data;
 static ulg output_ptr;
 static ulg bytes_out;
 
-static void *malloc(int size);
-static void free(void *where);
 static void error(char *m);
 static void gzip_mark(void **);
 static void gzip_release(void **);
 
 extern int end;
 static ulg free_mem_ptr;
-static ulg free_mem_ptr_end;
+static ulg free_mem_end_ptr;
 
 #define HEAP_SIZE 0x3000
 
 #include "../../../lib/inflate.c"
 
-static void *malloc(int size)
-{
-	void *p;
-
-	if (size <0) error("Malloc error");
-	if (free_mem_ptr <= 0) error("Memory error");
-
-	free_mem_ptr = (free_mem_ptr + 3) & ~3;	/* Align */
-
-	p = (void *)free_mem_ptr;
-	free_mem_ptr += size;
-
-	if (free_mem_ptr >= free_mem_ptr_end)
-		error("Out of memory");
-	return p;
-}
-
-static void free(void *where)
-{ /* gzip_mark & gzip_release do the free */
-}
-
-static void gzip_mark(void **ptr)
-{
-	*ptr = (void *) free_mem_ptr;
-}
-
-static void gzip_release(void **ptr)
-{
-	free_mem_ptr = (long) *ptr;
-}
-
 /* ===========================================================================
  * Fill the input buffer. This is called only when the buffer is empty
  * and at least one byte is really needed.
@@ -193,7 +158,7 @@ decompress_kernel(void *output_start,
 
 	/* FIXME FIXME FIXME */
 	free_mem_ptr		= (ulg)output_start + ksize;
-	free_mem_ptr_end	= (ulg)output_start + ksize + 0x200000;
+	free_mem_end_ptr	= (ulg)output_start + ksize + 0x200000;
 	/* FIXME FIXME FIXME */
 
 	/* put in temp area to reduce initial footprint */
diff --git a/include/asm-alpha/8253pit.h b/arch/alpha/include/asm/8253pit.h
index fef5c1450e47..fef5c1450e47 100644
--- a/include/asm-alpha/8253pit.h
+++ b/arch/alpha/include/asm/8253pit.h
diff --git a/include/asm-alpha/Kbuild b/arch/alpha/include/asm/Kbuild
index b7c8f188b313..b7c8f188b313 100644
--- a/include/asm-alpha/Kbuild
+++ b/arch/alpha/include/asm/Kbuild
diff --git a/include/asm-alpha/a.out-core.h b/arch/alpha/include/asm/a.out-core.h
index 9e33e92e524c..9e33e92e524c 100644
--- a/include/asm-alpha/a.out-core.h
+++ b/arch/alpha/include/asm/a.out-core.h
diff --git a/include/asm-alpha/a.out.h b/arch/alpha/include/asm/a.out.h
index 02ce8473870a..02ce8473870a 100644
--- a/include/asm-alpha/a.out.h
+++ b/arch/alpha/include/asm/a.out.h
diff --git a/include/asm-alpha/agp.h b/arch/alpha/include/asm/agp.h
index 26c179135293..26c179135293 100644
--- a/include/asm-alpha/agp.h
+++ b/arch/alpha/include/asm/agp.h
diff --git a/include/asm-alpha/agp_backend.h b/arch/alpha/include/asm/agp_backend.h
index 55dd44a2cea7..55dd44a2cea7 100644
--- a/include/asm-alpha/agp_backend.h
+++ b/arch/alpha/include/asm/agp_backend.h
diff --git a/include/asm-alpha/atomic.h b/arch/alpha/include/asm/atomic.h
index ca88e54dec93..ca88e54dec93 100644
--- a/include/asm-alpha/atomic.h
+++ b/arch/alpha/include/asm/atomic.h
diff --git a/include/asm-alpha/auxvec.h b/arch/alpha/include/asm/auxvec.h
index e96fe880e310..e96fe880e310 100644
--- a/include/asm-alpha/auxvec.h
+++ b/arch/alpha/include/asm/auxvec.h
diff --git a/include/asm-alpha/barrier.h b/arch/alpha/include/asm/barrier.h
index ac78eba909bc..ac78eba909bc 100644
--- a/include/asm-alpha/barrier.h
+++ b/arch/alpha/include/asm/barrier.h
diff --git a/include/asm-alpha/bitops.h b/arch/alpha/include/asm/bitops.h
index 15f3ae25c511..15f3ae25c511 100644
--- a/include/asm-alpha/bitops.h
+++ b/arch/alpha/include/asm/bitops.h
diff --git a/include/asm-alpha/bug.h b/arch/alpha/include/asm/bug.h
index 695a5ee4b5d3..695a5ee4b5d3 100644
--- a/include/asm-alpha/bug.h
+++ b/arch/alpha/include/asm/bug.h
diff --git a/include/asm-alpha/bugs.h b/arch/alpha/include/asm/bugs.h
index 78030d1c7e7e..78030d1c7e7e 100644
--- a/include/asm-alpha/bugs.h
+++ b/arch/alpha/include/asm/bugs.h
diff --git a/include/asm-alpha/byteorder.h b/arch/alpha/include/asm/byteorder.h
index 58e958fc7f1b..58e958fc7f1b 100644
--- a/include/asm-alpha/byteorder.h
+++ b/arch/alpha/include/asm/byteorder.h
diff --git a/include/asm-alpha/cache.h b/arch/alpha/include/asm/cache.h
index f199e69a5d0b..f199e69a5d0b 100644
--- a/include/asm-alpha/cache.h
+++ b/arch/alpha/include/asm/cache.h
diff --git a/include/asm-alpha/cacheflush.h b/arch/alpha/include/asm/cacheflush.h
index b686cc7fc44e..b686cc7fc44e 100644
--- a/include/asm-alpha/cacheflush.h
+++ b/arch/alpha/include/asm/cacheflush.h
diff --git a/include/asm-alpha/checksum.h b/arch/alpha/include/asm/checksum.h
index d3854bbf0a9e..d3854bbf0a9e 100644
--- a/include/asm-alpha/checksum.h
+++ b/arch/alpha/include/asm/checksum.h
diff --git a/include/asm-alpha/compiler.h b/arch/alpha/include/asm/compiler.h
index da6bb199839c..da6bb199839c 100644
--- a/include/asm-alpha/compiler.h
+++ b/arch/alpha/include/asm/compiler.h
diff --git a/include/asm-alpha/console.h b/arch/alpha/include/asm/console.h
index a3ce4e62249b..a3ce4e62249b 100644
--- a/include/asm-alpha/console.h
+++ b/arch/alpha/include/asm/console.h
diff --git a/include/asm-alpha/core_apecs.h b/arch/alpha/include/asm/core_apecs.h
index 6785ff7e02bc..6785ff7e02bc 100644
--- a/include/asm-alpha/core_apecs.h
+++ b/arch/alpha/include/asm/core_apecs.h
diff --git a/include/asm-alpha/core_cia.h b/arch/alpha/include/asm/core_cia.h
index 9e0516c0ca27..9e0516c0ca27 100644
--- a/include/asm-alpha/core_cia.h
+++ b/arch/alpha/include/asm/core_cia.h
diff --git a/include/asm-alpha/core_irongate.h b/arch/alpha/include/asm/core_irongate.h
index 24b2db541501..24b2db541501 100644
--- a/include/asm-alpha/core_irongate.h
+++ b/arch/alpha/include/asm/core_irongate.h
diff --git a/include/asm-alpha/core_lca.h b/arch/alpha/include/asm/core_lca.h
index f7cb4b460954..f7cb4b460954 100644
--- a/include/asm-alpha/core_lca.h
+++ b/arch/alpha/include/asm/core_lca.h
diff --git a/include/asm-alpha/core_marvel.h b/arch/alpha/include/asm/core_marvel.h
index 30d55fe7aaf6..30d55fe7aaf6 100644
--- a/include/asm-alpha/core_marvel.h
+++ b/arch/alpha/include/asm/core_marvel.h
diff --git a/include/asm-alpha/core_mcpcia.h b/arch/alpha/include/asm/core_mcpcia.h
index acf55b483472..acf55b483472 100644
--- a/include/asm-alpha/core_mcpcia.h
+++ b/arch/alpha/include/asm/core_mcpcia.h
diff --git a/include/asm-alpha/core_polaris.h b/arch/alpha/include/asm/core_polaris.h
index 2f966b64659d..2f966b64659d 100644
--- a/include/asm-alpha/core_polaris.h
+++ b/arch/alpha/include/asm/core_polaris.h
diff --git a/include/asm-alpha/core_t2.h b/arch/alpha/include/asm/core_t2.h
index 46bfff58f670..46bfff58f670 100644
--- a/include/asm-alpha/core_t2.h
+++ b/arch/alpha/include/asm/core_t2.h
diff --git a/include/asm-alpha/core_titan.h b/arch/alpha/include/asm/core_titan.h
index a17f6f33b68e..a17f6f33b68e 100644
--- a/include/asm-alpha/core_titan.h
+++ b/arch/alpha/include/asm/core_titan.h
diff --git a/include/asm-alpha/core_tsunami.h b/arch/alpha/include/asm/core_tsunami.h
index 58d4fe48742c..58d4fe48742c 100644
--- a/include/asm-alpha/core_tsunami.h
+++ b/arch/alpha/include/asm/core_tsunami.h
diff --git a/include/asm-alpha/core_wildfire.h b/arch/alpha/include/asm/core_wildfire.h
index cd562f544ba2..cd562f544ba2 100644
--- a/include/asm-alpha/core_wildfire.h
+++ b/arch/alpha/include/asm/core_wildfire.h
diff --git a/include/asm-alpha/cputime.h b/arch/alpha/include/asm/cputime.h
index 19577fd93230..19577fd93230 100644
--- a/include/asm-alpha/cputime.h
+++ b/arch/alpha/include/asm/cputime.h
diff --git a/include/asm-alpha/current.h b/arch/alpha/include/asm/current.h
index 094d285a1b34..094d285a1b34 100644
--- a/include/asm-alpha/current.h
+++ b/arch/alpha/include/asm/current.h
diff --git a/include/asm-alpha/delay.h b/arch/alpha/include/asm/delay.h
index 2aa3f410f7e6..2aa3f410f7e6 100644
--- a/include/asm-alpha/delay.h
+++ b/arch/alpha/include/asm/delay.h
diff --git a/include/asm-alpha/device.h b/arch/alpha/include/asm/device.h
index d8f9872b0e2d..d8f9872b0e2d 100644
--- a/include/asm-alpha/device.h
+++ b/arch/alpha/include/asm/device.h
diff --git a/include/asm-alpha/div64.h b/arch/alpha/include/asm/div64.h
index 6cd978cefb28..6cd978cefb28 100644
--- a/include/asm-alpha/div64.h
+++ b/arch/alpha/include/asm/div64.h
diff --git a/arch/alpha/include/asm/dma-mapping.h b/arch/alpha/include/asm/dma-mapping.h
new file mode 100644
index 000000000000..a5801ae02e4b
--- /dev/null
+++ b/arch/alpha/include/asm/dma-mapping.h
@@ -0,0 +1,69 @@
+#ifndef _ALPHA_DMA_MAPPING_H
+#define _ALPHA_DMA_MAPPING_H
+
+
+#ifdef CONFIG_PCI
+
+#include <linux/pci.h>
+
+#define dma_map_single(dev, va, size, dir)		\
+		pci_map_single(alpha_gendev_to_pci(dev), va, size, dir)
+#define dma_unmap_single(dev, addr, size, dir)		\
+		pci_unmap_single(alpha_gendev_to_pci(dev), addr, size, dir)
+#define dma_alloc_coherent(dev, size, addr, gfp)	\
+	      __pci_alloc_consistent(alpha_gendev_to_pci(dev), size, addr, gfp)
+#define dma_free_coherent(dev, size, va, addr)		\
+		pci_free_consistent(alpha_gendev_to_pci(dev), size, va, addr)
+#define dma_map_page(dev, page, off, size, dir)		\
+		pci_map_page(alpha_gendev_to_pci(dev), page, off, size, dir)
+#define dma_unmap_page(dev, addr, size, dir)		\
+		pci_unmap_page(alpha_gendev_to_pci(dev), addr, size, dir)
+#define dma_map_sg(dev, sg, nents, dir)			\
+		pci_map_sg(alpha_gendev_to_pci(dev), sg, nents, dir)
+#define dma_unmap_sg(dev, sg, nents, dir)		\
+		pci_unmap_sg(alpha_gendev_to_pci(dev), sg, nents, dir)
+#define dma_supported(dev, mask)			\
+		pci_dma_supported(alpha_gendev_to_pci(dev), mask)
+#define dma_mapping_error(dev, addr)				\
+		pci_dma_mapping_error(alpha_gendev_to_pci(dev), addr)
+
+#else	/* no PCI - no IOMMU. */
+
+struct scatterlist;
+void *dma_alloc_coherent(struct device *dev, size_t size,
+			 dma_addr_t *dma_handle, gfp_t gfp);
+int dma_map_sg(struct device *dev, struct scatterlist *sg, int nents,
+	       enum dma_data_direction direction);
+
+#define dma_free_coherent(dev, size, va, addr)		\
+		free_pages((unsigned long)va, get_order(size))
+#define dma_supported(dev, mask)		(mask < 0x00ffffffUL ? 0 : 1)
+#define dma_map_single(dev, va, size, dir)	virt_to_phys(va)
+#define dma_map_page(dev, page, off, size, dir)	(page_to_pa(page) + off)
+
+#define dma_unmap_single(dev, addr, size, dir)	((void)0)
+#define dma_unmap_page(dev, addr, size, dir)	((void)0)
+#define dma_unmap_sg(dev, sg, nents, dir)	((void)0)
+
+#define dma_mapping_error(dev, addr)  (0)
+
+#endif	/* !CONFIG_PCI */
+
+#define dma_alloc_noncoherent(d, s, h, f)	dma_alloc_coherent(d, s, h, f)
+#define dma_free_noncoherent(d, s, v, h)	dma_free_coherent(d, s, v, h)
+#define dma_is_consistent(d, h)			(1)
+
+int dma_set_mask(struct device *dev, u64 mask);
+
+#define dma_sync_single_for_cpu(dev, addr, size, dir)	  ((void)0)
+#define dma_sync_single_for_device(dev, addr, size, dir)  ((void)0)
+#define dma_sync_single_range(dev, addr, off, size, dir)  ((void)0)
+#define dma_sync_sg_for_cpu(dev, sg, nents, dir)	  ((void)0)
+#define dma_sync_sg_for_device(dev, sg, nents, dir)	  ((void)0)
+#define dma_cache_sync(dev, va, size, dir)		  ((void)0)
+#define dma_sync_single_range_for_cpu(dev, addr, offset, size, dir)	((void)0)
+#define dma_sync_single_range_for_device(dev, addr, offset, size, dir)	((void)0)
+
+#define dma_get_cache_alignment()			  L1_CACHE_BYTES
+
+#endif	/* _ALPHA_DMA_MAPPING_H */
diff --git a/include/asm-alpha/dma.h b/arch/alpha/include/asm/dma.h
index 87cfdbdf08fc..87cfdbdf08fc 100644
--- a/include/asm-alpha/dma.h
+++ b/arch/alpha/include/asm/dma.h
diff --git a/include/asm-alpha/elf.h b/arch/alpha/include/asm/elf.h
index fc1002ea1e0c..fc1002ea1e0c 100644
--- a/include/asm-alpha/elf.h
+++ b/arch/alpha/include/asm/elf.h
diff --git a/include/asm-alpha/emergency-restart.h b/arch/alpha/include/asm/emergency-restart.h
index 108d8c48e42e..108d8c48e42e 100644
--- a/include/asm-alpha/emergency-restart.h
+++ b/arch/alpha/include/asm/emergency-restart.h
diff --git a/include/asm-alpha/err_common.h b/arch/alpha/include/asm/err_common.h
index c25095942107..c25095942107 100644
--- a/include/asm-alpha/err_common.h
+++ b/arch/alpha/include/asm/err_common.h
diff --git a/include/asm-alpha/err_ev6.h b/arch/alpha/include/asm/err_ev6.h
index ea637791e4a9..ea637791e4a9 100644
--- a/include/asm-alpha/err_ev6.h
+++ b/arch/alpha/include/asm/err_ev6.h
diff --git a/include/asm-alpha/err_ev7.h b/arch/alpha/include/asm/err_ev7.h
index 87f99777c2e4..87f99777c2e4 100644
--- a/include/asm-alpha/err_ev7.h
+++ b/arch/alpha/include/asm/err_ev7.h
diff --git a/include/asm-alpha/errno.h b/arch/alpha/include/asm/errno.h
index 69e2655249d2..69e2655249d2 100644
--- a/include/asm-alpha/errno.h
+++ b/arch/alpha/include/asm/errno.h
diff --git a/include/asm-alpha/fb.h b/arch/alpha/include/asm/fb.h
index fa9bbb96b2b3..fa9bbb96b2b3 100644
--- a/include/asm-alpha/fb.h
+++ b/arch/alpha/include/asm/fb.h
diff --git a/include/asm-alpha/fcntl.h b/arch/alpha/include/asm/fcntl.h
index 25da0017ec87..25da0017ec87 100644
--- a/include/asm-alpha/fcntl.h
+++ b/arch/alpha/include/asm/fcntl.h
diff --git a/include/asm-alpha/floppy.h b/arch/alpha/include/asm/floppy.h
index 0be50413b2b5..0be50413b2b5 100644
--- a/include/asm-alpha/floppy.h
+++ b/arch/alpha/include/asm/floppy.h
diff --git a/include/asm-alpha/fpu.h b/arch/alpha/include/asm/fpu.h
index ecb17a72acc3..ecb17a72acc3 100644
--- a/include/asm-alpha/fpu.h
+++ b/arch/alpha/include/asm/fpu.h
diff --git a/include/asm-alpha/futex.h b/arch/alpha/include/asm/futex.h
index 6a332a9f099c..6a332a9f099c 100644
--- a/include/asm-alpha/futex.h
+++ b/arch/alpha/include/asm/futex.h
diff --git a/include/asm-alpha/gct.h b/arch/alpha/include/asm/gct.h
index 3504c704927c..3504c704927c 100644
--- a/include/asm-alpha/gct.h
+++ b/arch/alpha/include/asm/gct.h
diff --git a/include/asm-alpha/gentrap.h b/arch/alpha/include/asm/gentrap.h
index ae50cc3192c7..ae50cc3192c7 100644
--- a/include/asm-alpha/gentrap.h
+++ b/arch/alpha/include/asm/gentrap.h
diff --git a/include/asm-alpha/hardirq.h b/arch/alpha/include/asm/hardirq.h
index d953e234daa8..d953e234daa8 100644
--- a/include/asm-alpha/hardirq.h
+++ b/arch/alpha/include/asm/hardirq.h
diff --git a/include/asm-alpha/hw_irq.h b/arch/alpha/include/asm/hw_irq.h
index a37db0f95092..a37db0f95092 100644
--- a/include/asm-alpha/hw_irq.h
+++ b/arch/alpha/include/asm/hw_irq.h
diff --git a/include/asm-alpha/hwrpb.h b/arch/alpha/include/asm/hwrpb.h
index 8e8f871af7cf..8e8f871af7cf 100644
--- a/include/asm-alpha/hwrpb.h
+++ b/arch/alpha/include/asm/hwrpb.h
diff --git a/include/asm-alpha/io.h b/arch/alpha/include/asm/io.h
index e971ab000f95..e971ab000f95 100644
--- a/include/asm-alpha/io.h
+++ b/arch/alpha/include/asm/io.h
diff --git a/include/asm-alpha/io_trivial.h b/arch/alpha/include/asm/io_trivial.h
index 1c77f10b4b36..1c77f10b4b36 100644
--- a/include/asm-alpha/io_trivial.h
+++ b/arch/alpha/include/asm/io_trivial.h
diff --git a/include/asm-alpha/ioctl.h b/arch/alpha/include/asm/ioctl.h
index fc63727f4178..fc63727f4178 100644
--- a/include/asm-alpha/ioctl.h
+++ b/arch/alpha/include/asm/ioctl.h
diff --git a/include/asm-alpha/ioctls.h b/arch/alpha/include/asm/ioctls.h
index 67bb9f6fdbe4..67bb9f6fdbe4 100644
--- a/include/asm-alpha/ioctls.h
+++ b/arch/alpha/include/asm/ioctls.h
diff --git a/include/asm-alpha/ipcbuf.h b/arch/alpha/include/asm/ipcbuf.h
index d9c0e1a50702..d9c0e1a50702 100644
--- a/include/asm-alpha/ipcbuf.h
+++ b/arch/alpha/include/asm/ipcbuf.h
diff --git a/include/asm-alpha/irq.h b/arch/alpha/include/asm/irq.h
index 06377400dc09..06377400dc09 100644
--- a/include/asm-alpha/irq.h
+++ b/arch/alpha/include/asm/irq.h
diff --git a/include/asm-alpha/irq_regs.h b/arch/alpha/include/asm/irq_regs.h
index 3dd9c0b70270..3dd9c0b70270 100644
--- a/include/asm-alpha/irq_regs.h
+++ b/arch/alpha/include/asm/irq_regs.h
diff --git a/include/asm-alpha/jensen.h b/arch/alpha/include/asm/jensen.h
index 964b06ead43b..964b06ead43b 100644
--- a/include/asm-alpha/jensen.h
+++ b/arch/alpha/include/asm/jensen.h
diff --git a/include/asm-alpha/kdebug.h b/arch/alpha/include/asm/kdebug.h
index 6ece1b037665..6ece1b037665 100644
--- a/include/asm-alpha/kdebug.h
+++ b/arch/alpha/include/asm/kdebug.h
diff --git a/include/asm-alpha/kmap_types.h b/arch/alpha/include/asm/kmap_types.h
index 3e6735a34c57..3e6735a34c57 100644
--- a/include/asm-alpha/kmap_types.h
+++ b/arch/alpha/include/asm/kmap_types.h
diff --git a/include/asm-alpha/linkage.h b/arch/alpha/include/asm/linkage.h
index 291c2d01c44f..291c2d01c44f 100644
--- a/include/asm-alpha/linkage.h
+++ b/arch/alpha/include/asm/linkage.h
diff --git a/include/asm-alpha/local.h b/arch/alpha/include/asm/local.h
index 6ad3ea696421..6ad3ea696421 100644
--- a/include/asm-alpha/local.h
+++ b/arch/alpha/include/asm/local.h
diff --git a/include/asm-alpha/machvec.h b/arch/alpha/include/asm/machvec.h
index a86c083cdf7f..a86c083cdf7f 100644
--- a/include/asm-alpha/machvec.h
+++ b/arch/alpha/include/asm/machvec.h
diff --git a/include/asm-alpha/mc146818rtc.h b/arch/alpha/include/asm/mc146818rtc.h
index 097703f1c8cb..097703f1c8cb 100644
--- a/include/asm-alpha/mc146818rtc.h
+++ b/arch/alpha/include/asm/mc146818rtc.h
diff --git a/include/asm-alpha/md.h b/arch/alpha/include/asm/md.h
index 6c9b8222a4f2..6c9b8222a4f2 100644
--- a/include/asm-alpha/md.h
+++ b/arch/alpha/include/asm/md.h
diff --git a/include/asm-alpha/mman.h b/arch/alpha/include/asm/mman.h
index 90d7c35d2867..90d7c35d2867 100644
--- a/include/asm-alpha/mman.h
+++ b/arch/alpha/include/asm/mman.h
diff --git a/include/asm-alpha/mmu.h b/arch/alpha/include/asm/mmu.h
index 3dc127779329..3dc127779329 100644
--- a/include/asm-alpha/mmu.h
+++ b/arch/alpha/include/asm/mmu.h
diff --git a/include/asm-alpha/mmu_context.h b/arch/alpha/include/asm/mmu_context.h
index 86c08a02d239..86c08a02d239 100644
--- a/include/asm-alpha/mmu_context.h
+++ b/arch/alpha/include/asm/mmu_context.h
diff --git a/include/asm-alpha/mmzone.h b/arch/alpha/include/asm/mmzone.h
index 8af56ce346ad..8af56ce346ad 100644
--- a/include/asm-alpha/mmzone.h
+++ b/arch/alpha/include/asm/mmzone.h
diff --git a/include/asm-alpha/module.h b/arch/alpha/include/asm/module.h
index 7b63743c534a..7b63743c534a 100644
--- a/include/asm-alpha/module.h
+++ b/arch/alpha/include/asm/module.h
diff --git a/include/asm-alpha/msgbuf.h b/arch/alpha/include/asm/msgbuf.h
index 98496501a2bb..98496501a2bb 100644
--- a/include/asm-alpha/msgbuf.h
+++ b/arch/alpha/include/asm/msgbuf.h
diff --git a/include/asm-alpha/mutex.h b/arch/alpha/include/asm/mutex.h
index 458c1f7fbc18..458c1f7fbc18 100644
--- a/include/asm-alpha/mutex.h
+++ b/arch/alpha/include/asm/mutex.h
diff --git a/include/asm-alpha/page.h b/arch/alpha/include/asm/page.h
index 0995f9d13417..0995f9d13417 100644
--- a/include/asm-alpha/page.h
+++ b/arch/alpha/include/asm/page.h
diff --git a/include/asm-alpha/pal.h b/arch/alpha/include/asm/pal.h
index 9b4ba0d6f00b..9b4ba0d6f00b 100644
--- a/include/asm-alpha/pal.h
+++ b/arch/alpha/include/asm/pal.h
diff --git a/include/asm-alpha/param.h b/arch/alpha/include/asm/param.h
index e691ecfedb2c..e691ecfedb2c 100644
--- a/include/asm-alpha/param.h
+++ b/arch/alpha/include/asm/param.h
diff --git a/include/asm-alpha/parport.h b/arch/alpha/include/asm/parport.h
index c5ee7cbb2fcd..c5ee7cbb2fcd 100644
--- a/include/asm-alpha/parport.h
+++ b/arch/alpha/include/asm/parport.h
diff --git a/arch/alpha/include/asm/pci.h b/arch/alpha/include/asm/pci.h
new file mode 100644
index 000000000000..2a14302c17a3
--- /dev/null
+++ b/arch/alpha/include/asm/pci.h
@@ -0,0 +1,276 @@
+#ifndef __ALPHA_PCI_H
+#define __ALPHA_PCI_H
+
+#ifdef __KERNEL__
+
+#include <linux/spinlock.h>
+#include <linux/dma-mapping.h>
+#include <asm/scatterlist.h>
+#include <asm/machvec.h>
+
+/*
+ * The following structure is used to manage multiple PCI busses.
+ */
+
+struct pci_dev;
+struct pci_bus;
+struct resource;
+struct pci_iommu_arena;
+struct page;
+
+/* A controller.  Used to manage multiple PCI busses.  */
+
+struct pci_controller {
+	struct pci_controller *next;
+        struct pci_bus *bus;
+	struct resource *io_space;
+	struct resource *mem_space;
+
+	/* The following are for reporting to userland.  The invariant is
+	   that if we report a BWX-capable dense memory, we do not report
+	   a sparse memory at all, even if it exists.  */
+	unsigned long sparse_mem_base;
+	unsigned long dense_mem_base;
+	unsigned long sparse_io_base;
+	unsigned long dense_io_base;
+
+	/* This one's for the kernel only.  It's in KSEG somewhere.  */
+	unsigned long config_space_base;
+
+	unsigned int index;
+	/* For compatibility with current (as of July 2003) pciutils
+	   and XFree86. Eventually will be removed. */
+	unsigned int need_domain_info;
+
+	struct pci_iommu_arena *sg_pci;
+	struct pci_iommu_arena *sg_isa;
+
+	void *sysdata;
+};
+
+/* Override the logic in pci_scan_bus for skipping already-configured
+   bus numbers.  */
+
+#define pcibios_assign_all_busses()	1
+#define pcibios_scan_all_fns(a, b)	0
+
+#define PCIBIOS_MIN_IO		alpha_mv.min_io_address
+#define PCIBIOS_MIN_MEM		alpha_mv.min_mem_address
+
+extern void pcibios_set_master(struct pci_dev *dev);
+
+extern inline void pcibios_penalize_isa_irq(int irq, int active)
+{
+	/* We don't do dynamic PCI IRQ allocation */
+}
+
+/* IOMMU controls.  */
+
+/* The PCI address space does not equal the physical memory address space.
+   The networking and block device layers use this boolean for bounce buffer
+   decisions.  */
+#define PCI_DMA_BUS_IS_PHYS  0
+
+/* Allocate and map kernel buffer using consistent mode DMA for PCI
+   device.  Returns non-NULL cpu-view pointer to the buffer if
+   successful and sets *DMA_ADDRP to the pci side dma address as well,
+   else DMA_ADDRP is undefined.  */
+
+extern void *__pci_alloc_consistent(struct pci_dev *, size_t,
+				    dma_addr_t *, gfp_t);
+static inline void *
+pci_alloc_consistent(struct pci_dev *dev, size_t size, dma_addr_t *dma)
+{
+	return __pci_alloc_consistent(dev, size, dma, GFP_ATOMIC);
+}
+
+/* Free and unmap a consistent DMA buffer.  CPU_ADDR and DMA_ADDR must
+   be values that were returned from pci_alloc_consistent.  SIZE must
+   be the same as what as passed into pci_alloc_consistent.
+   References to the memory and mappings associated with CPU_ADDR or
+   DMA_ADDR past this call are illegal.  */
+
+extern void pci_free_consistent(struct pci_dev *, size_t, void *, dma_addr_t);
+
+/* Map a single buffer of the indicate size for PCI DMA in streaming mode.
+   The 32-bit PCI bus mastering address to use is returned.  Once the device
+   is given the dma address, the device owns this memory until either
+   pci_unmap_single or pci_dma_sync_single_for_cpu is performed.  */
+
+extern dma_addr_t pci_map_single(struct pci_dev *, void *, size_t, int);
+
+/* Likewise, but for a page instead of an address.  */
+extern dma_addr_t pci_map_page(struct pci_dev *, struct page *,
+			       unsigned long, size_t, int);
+
+/* Test for pci_map_single or pci_map_page having generated an error.  */
+
+static inline int
+pci_dma_mapping_error(struct pci_dev *pdev, dma_addr_t dma_addr)
+{
+	return dma_addr == 0;
+}
+
+/* Unmap a single streaming mode DMA translation.  The DMA_ADDR and
+   SIZE must match what was provided for in a previous pci_map_single
+   call.  All other usages are undefined.  After this call, reads by
+   the cpu to the buffer are guaranteed to see whatever the device
+   wrote there.  */
+
+extern void pci_unmap_single(struct pci_dev *, dma_addr_t, size_t, int);
+extern void pci_unmap_page(struct pci_dev *, dma_addr_t, size_t, int);
+
+/* pci_unmap_{single,page} is not a nop, thus... */
+#define DECLARE_PCI_UNMAP_ADDR(ADDR_NAME)	\
+	dma_addr_t ADDR_NAME;
+#define DECLARE_PCI_UNMAP_LEN(LEN_NAME)		\
+	__u32 LEN_NAME;
+#define pci_unmap_addr(PTR, ADDR_NAME)			\
+	((PTR)->ADDR_NAME)
+#define pci_unmap_addr_set(PTR, ADDR_NAME, VAL)		\
+	(((PTR)->ADDR_NAME) = (VAL))
+#define pci_unmap_len(PTR, LEN_NAME)			\
+	((PTR)->LEN_NAME)
+#define pci_unmap_len_set(PTR, LEN_NAME, VAL)		\
+	(((PTR)->LEN_NAME) = (VAL))
+
+/* Map a set of buffers described by scatterlist in streaming mode for
+   PCI DMA.  This is the scatter-gather version of the above
+   pci_map_single interface.  Here the scatter gather list elements
+   are each tagged with the appropriate PCI dma address and length.
+   They are obtained via sg_dma_{address,length}(SG).
+
+   NOTE: An implementation may be able to use a smaller number of DMA
+   address/length pairs than there are SG table elements.  (for
+   example via virtual mapping capabilities) The routine returns the
+   number of addr/length pairs actually used, at most nents.
+
+   Device ownership issues as mentioned above for pci_map_single are
+   the same here.  */
+
+extern int pci_map_sg(struct pci_dev *, struct scatterlist *, int, int);
+
+/* Unmap a set of streaming mode DMA translations.  Again, cpu read
+   rules concerning calls here are the same as for pci_unmap_single()
+   above.  */
+
+extern void pci_unmap_sg(struct pci_dev *, struct scatterlist *, int, int);
+
+/* Make physical memory consistent for a single streaming mode DMA
+   translation after a transfer and device currently has ownership
+   of the buffer.
+
+   If you perform a pci_map_single() but wish to interrogate the
+   buffer using the cpu, yet do not wish to teardown the PCI dma
+   mapping, you must call this function before doing so.  At the next
+   point you give the PCI dma address back to the card, you must first
+   perform a pci_dma_sync_for_device, and then the device again owns
+   the buffer.  */
+
+static inline void
+pci_dma_sync_single_for_cpu(struct pci_dev *dev, dma_addr_t dma_addr,
+			    long size, int direction)
+{
+	/* Nothing to do.  */
+}
+
+static inline void
+pci_dma_sync_single_for_device(struct pci_dev *dev, dma_addr_t dma_addr,
+			       size_t size, int direction)
+{
+	/* Nothing to do.  */
+}
+
+/* Make physical memory consistent for a set of streaming mode DMA
+   translations after a transfer.  The same as pci_dma_sync_single_*
+   but for a scatter-gather list, same rules and usage.  */
+
+static inline void
+pci_dma_sync_sg_for_cpu(struct pci_dev *dev, struct scatterlist *sg,
+			int nents, int direction)
+{
+	/* Nothing to do.  */
+}
+
+static inline void
+pci_dma_sync_sg_for_device(struct pci_dev *dev, struct scatterlist *sg,
+			   int nents, int direction)
+{
+	/* Nothing to do.  */
+}
+
+/* Return whether the given PCI device DMA address mask can
+   be supported properly.  For example, if your device can
+   only drive the low 24-bits during PCI bus mastering, then
+   you would pass 0x00ffffff as the mask to this function.  */
+
+extern int pci_dma_supported(struct pci_dev *hwdev, u64 mask);
+
+#ifdef CONFIG_PCI
+static inline void pci_dma_burst_advice(struct pci_dev *pdev,
+					enum pci_dma_burst_strategy *strat,
+					unsigned long *strategy_parameter)
+{
+	unsigned long cacheline_size;
+	u8 byte;
+
+	pci_read_config_byte(pdev, PCI_CACHE_LINE_SIZE, &byte);
+	if (byte == 0)
+		cacheline_size = 1024;
+	else
+		cacheline_size = (int) byte * 4;
+
+	*strat = PCI_DMA_BURST_BOUNDARY;
+	*strategy_parameter = cacheline_size;
+}
+#endif
+
+/* TODO: integrate with include/asm-generic/pci.h ? */
+static inline int pci_get_legacy_ide_irq(struct pci_dev *dev, int channel)
+{
+	return channel ? 15 : 14;
+}
+
+extern void pcibios_resource_to_bus(struct pci_dev *, struct pci_bus_region *,
+				    struct resource *);
+
+extern void pcibios_bus_to_resource(struct pci_dev *dev, struct resource *res,
+				    struct pci_bus_region *region);
+
+static inline struct resource *
+pcibios_select_root(struct pci_dev *pdev, struct resource *res)
+{
+	struct resource *root = NULL;
+
+	if (res->flags & IORESOURCE_IO)
+		root = &ioport_resource;
+	if (res->flags & IORESOURCE_MEM)
+		root = &iomem_resource;
+
+	return root;
+}
+
+#define pci_domain_nr(bus) ((struct pci_controller *)(bus)->sysdata)->index
+
+static inline int pci_proc_domain(struct pci_bus *bus)
+{
+	struct pci_controller *hose = bus->sysdata;
+	return hose->need_domain_info;
+}
+
+struct pci_dev *alpha_gendev_to_pci(struct device *dev);
+
+#endif /* __KERNEL__ */
+
+/* Values for the `which' argument to sys_pciconfig_iobase.  */
+#define IOBASE_HOSE		0
+#define IOBASE_SPARSE_MEM	1
+#define IOBASE_DENSE_MEM	2
+#define IOBASE_SPARSE_IO	3
+#define IOBASE_DENSE_IO		4
+#define IOBASE_ROOT_BUS		5
+#define IOBASE_FROM_HOSE	0x10000
+
+extern struct pci_dev *isa_bridge;
+
+#endif /* __ALPHA_PCI_H */
diff --git a/include/asm-alpha/percpu.h b/arch/alpha/include/asm/percpu.h
index 3495e8e00d70..3495e8e00d70 100644
--- a/include/asm-alpha/percpu.h
+++ b/arch/alpha/include/asm/percpu.h
diff --git a/include/asm-alpha/pgalloc.h b/arch/alpha/include/asm/pgalloc.h
index fd090155dccd..fd090155dccd 100644
--- a/include/asm-alpha/pgalloc.h
+++ b/arch/alpha/include/asm/pgalloc.h
diff --git a/include/asm-alpha/pgtable.h b/arch/alpha/include/asm/pgtable.h
index 3f0c59f6d8aa..3f0c59f6d8aa 100644
--- a/include/asm-alpha/pgtable.h
+++ b/arch/alpha/include/asm/pgtable.h
diff --git a/include/asm-alpha/poll.h b/arch/alpha/include/asm/poll.h
index c98509d3149e..c98509d3149e 100644
--- a/include/asm-alpha/poll.h
+++ b/arch/alpha/include/asm/poll.h
diff --git a/include/asm-alpha/posix_types.h b/arch/alpha/include/asm/posix_types.h
index db167413300b..db167413300b 100644
--- a/include/asm-alpha/posix_types.h
+++ b/arch/alpha/include/asm/posix_types.h
diff --git a/include/asm-alpha/processor.h b/arch/alpha/include/asm/processor.h
index 94afe5859301..94afe5859301 100644
--- a/include/asm-alpha/processor.h
+++ b/arch/alpha/include/asm/processor.h
diff --git a/include/asm-alpha/ptrace.h b/arch/alpha/include/asm/ptrace.h
index 32c7a5cddd59..32c7a5cddd59 100644
--- a/include/asm-alpha/ptrace.h
+++ b/arch/alpha/include/asm/ptrace.h
diff --git a/include/asm-alpha/reg.h b/arch/alpha/include/asm/reg.h
index 86ff916fb069..86ff916fb069 100644
--- a/include/asm-alpha/reg.h
+++ b/arch/alpha/include/asm/reg.h
diff --git a/include/asm-alpha/regdef.h b/arch/alpha/include/asm/regdef.h
index 142df9c4f8b8..142df9c4f8b8 100644
--- a/include/asm-alpha/regdef.h
+++ b/arch/alpha/include/asm/regdef.h
diff --git a/include/asm-alpha/resource.h b/arch/alpha/include/asm/resource.h
index c10874ff5973..c10874ff5973 100644
--- a/include/asm-alpha/resource.h
+++ b/arch/alpha/include/asm/resource.h
diff --git a/include/asm-alpha/rtc.h b/arch/alpha/include/asm/rtc.h
index 4e854b1333eb..4e854b1333eb 100644
--- a/include/asm-alpha/rtc.h
+++ b/arch/alpha/include/asm/rtc.h
diff --git a/include/asm-alpha/rwsem.h b/arch/alpha/include/asm/rwsem.h
index 1570c0b54336..1570c0b54336 100644
--- a/include/asm-alpha/rwsem.h
+++ b/arch/alpha/include/asm/rwsem.h
diff --git a/include/asm-alpha/scatterlist.h b/arch/alpha/include/asm/scatterlist.h
index 440747ca6349..440747ca6349 100644
--- a/include/asm-alpha/scatterlist.h
+++ b/arch/alpha/include/asm/scatterlist.h
diff --git a/include/asm-alpha/sections.h b/arch/alpha/include/asm/sections.h
index 43b40edd6e44..43b40edd6e44 100644
--- a/include/asm-alpha/sections.h
+++ b/arch/alpha/include/asm/sections.h
diff --git a/include/asm-alpha/segment.h b/arch/alpha/include/asm/segment.h
index 0453d97daae7..0453d97daae7 100644
--- a/include/asm-alpha/segment.h
+++ b/arch/alpha/include/asm/segment.h
diff --git a/include/asm-alpha/sembuf.h b/arch/alpha/include/asm/sembuf.h
index 7b38b1534784..7b38b1534784 100644
--- a/include/asm-alpha/sembuf.h
+++ b/arch/alpha/include/asm/sembuf.h
diff --git a/include/asm-alpha/serial.h b/arch/alpha/include/asm/serial.h
index 9d263e8d8ccc..9d263e8d8ccc 100644
--- a/include/asm-alpha/serial.h
+++ b/arch/alpha/include/asm/serial.h
diff --git a/include/asm-alpha/setup.h b/arch/alpha/include/asm/setup.h
index 2e023a4aa317..2e023a4aa317 100644
--- a/include/asm-alpha/setup.h
+++ b/arch/alpha/include/asm/setup.h
diff --git a/include/asm-alpha/sfp-machine.h b/arch/alpha/include/asm/sfp-machine.h
index 5fe63afbd474..5fe63afbd474 100644
--- a/include/asm-alpha/sfp-machine.h
+++ b/arch/alpha/include/asm/sfp-machine.h
diff --git a/include/asm-alpha/shmbuf.h b/arch/alpha/include/asm/shmbuf.h
index 37ee84f05085..37ee84f05085 100644
--- a/include/asm-alpha/shmbuf.h
+++ b/arch/alpha/include/asm/shmbuf.h
diff --git a/include/asm-alpha/shmparam.h b/arch/alpha/include/asm/shmparam.h
index cc901d58aebb..cc901d58aebb 100644
--- a/include/asm-alpha/shmparam.h
+++ b/arch/alpha/include/asm/shmparam.h
diff --git a/include/asm-alpha/sigcontext.h b/arch/alpha/include/asm/sigcontext.h
index 323cdb026198..323cdb026198 100644
--- a/include/asm-alpha/sigcontext.h
+++ b/arch/alpha/include/asm/sigcontext.h
diff --git a/include/asm-alpha/siginfo.h b/arch/alpha/include/asm/siginfo.h
index 9822362a8424..9822362a8424 100644
--- a/include/asm-alpha/siginfo.h
+++ b/arch/alpha/include/asm/siginfo.h
diff --git a/include/asm-alpha/signal.h b/arch/alpha/include/asm/signal.h
index 13c2305d35ef..13c2305d35ef 100644
--- a/include/asm-alpha/signal.h
+++ b/arch/alpha/include/asm/signal.h
diff --git a/include/asm-alpha/smp.h b/arch/alpha/include/asm/smp.h
index 544c69af8168..544c69af8168 100644
--- a/include/asm-alpha/smp.h
+++ b/arch/alpha/include/asm/smp.h
diff --git a/include/asm-alpha/socket.h b/arch/alpha/include/asm/socket.h
index a1057c2d95e7..a1057c2d95e7 100644
--- a/include/asm-alpha/socket.h
+++ b/arch/alpha/include/asm/socket.h
diff --git a/include/asm-alpha/sockios.h b/arch/alpha/include/asm/sockios.h
index 7932c7ab4a4d..7932c7ab4a4d 100644
--- a/include/asm-alpha/sockios.h
+++ b/arch/alpha/include/asm/sockios.h
diff --git a/include/asm-alpha/spinlock.h b/arch/alpha/include/asm/spinlock.h
index aeeb125f6851..aeeb125f6851 100644
--- a/include/asm-alpha/spinlock.h
+++ b/arch/alpha/include/asm/spinlock.h
diff --git a/include/asm-alpha/spinlock_types.h b/arch/alpha/include/asm/spinlock_types.h
index 8141eb5ebf0d..8141eb5ebf0d 100644
--- a/include/asm-alpha/spinlock_types.h
+++ b/arch/alpha/include/asm/spinlock_types.h
diff --git a/include/asm-alpha/stat.h b/arch/alpha/include/asm/stat.h
index 07ad3e6b3f3e..07ad3e6b3f3e 100644
--- a/include/asm-alpha/stat.h
+++ b/arch/alpha/include/asm/stat.h
diff --git a/include/asm-alpha/statfs.h b/arch/alpha/include/asm/statfs.h
index ad15830baefe..ad15830baefe 100644
--- a/include/asm-alpha/statfs.h
+++ b/arch/alpha/include/asm/statfs.h
diff --git a/include/asm-alpha/string.h b/arch/alpha/include/asm/string.h
index b02b8a282940..b02b8a282940 100644
--- a/include/asm-alpha/string.h
+++ b/arch/alpha/include/asm/string.h
diff --git a/include/asm-alpha/suspend.h b/arch/alpha/include/asm/suspend.h
index c7042d575851..c7042d575851 100644
--- a/include/asm-alpha/suspend.h
+++ b/arch/alpha/include/asm/suspend.h
diff --git a/include/asm-alpha/sysinfo.h b/arch/alpha/include/asm/sysinfo.h
index 086aba284df2..086aba284df2 100644
--- a/include/asm-alpha/sysinfo.h
+++ b/arch/alpha/include/asm/sysinfo.h
diff --git a/include/asm-alpha/system.h b/arch/alpha/include/asm/system.h
index afe20fa58c99..afe20fa58c99 100644
--- a/include/asm-alpha/system.h
+++ b/arch/alpha/include/asm/system.h
diff --git a/include/asm-alpha/termbits.h b/arch/alpha/include/asm/termbits.h
index ad854a4a3af6..ad854a4a3af6 100644
--- a/include/asm-alpha/termbits.h
+++ b/arch/alpha/include/asm/termbits.h
diff --git a/include/asm-alpha/termios.h b/arch/alpha/include/asm/termios.h
index fa13716a11c3..fa13716a11c3 100644
--- a/include/asm-alpha/termios.h
+++ b/arch/alpha/include/asm/termios.h
diff --git a/arch/alpha/include/asm/thread_info.h b/arch/alpha/include/asm/thread_info.h
new file mode 100644
index 000000000000..15fda4344424
--- /dev/null
+++ b/arch/alpha/include/asm/thread_info.h
@@ -0,0 +1,114 @@
+#ifndef _ALPHA_THREAD_INFO_H
+#define _ALPHA_THREAD_INFO_H
+
+#ifdef __KERNEL__
+
+#ifndef __ASSEMBLY__
+#include <asm/processor.h>
+#include <asm/types.h>
+#include <asm/hwrpb.h>
+#endif
+
+#ifndef __ASSEMBLY__
+struct thread_info {
+	struct pcb_struct	pcb;		/* palcode state */
+
+	struct task_struct	*task;		/* main task structure */
+	unsigned int		flags;		/* low level flags */
+	unsigned int		ieee_state;	/* see fpu.h */
+
+	struct exec_domain	*exec_domain;	/* execution domain */
+	mm_segment_t		addr_limit;	/* thread address space */
+	unsigned		cpu;		/* current CPU */
+	int			preempt_count; /* 0 => preemptable, <0 => BUG */
+
+	int bpt_nsaved;
+	unsigned long bpt_addr[2];		/* breakpoint handling  */
+	unsigned int bpt_insn[2];
+
+	struct restart_block	restart_block;
+};
+
+/*
+ * Macros/functions for gaining access to the thread information structure.
+ */
+#define INIT_THREAD_INFO(tsk)			\
+{						\
+	.task		= &tsk,			\
+	.exec_domain	= &default_exec_domain,	\
+	.addr_limit	= KERNEL_DS,		\
+	.restart_block = {			\
+		.fn = do_no_restart_syscall,	\
+	},					\
+}
+
+#define init_thread_info	(init_thread_union.thread_info)
+#define init_stack		(init_thread_union.stack)
+
+/* How to get the thread information struct from C.  */
+register struct thread_info *__current_thread_info __asm__("$8");
+#define current_thread_info()  __current_thread_info
+
+/* Thread information allocation.  */
+#define THREAD_SIZE_ORDER 1
+#define THREAD_SIZE (2*PAGE_SIZE)
+
+#endif /* __ASSEMBLY__ */
+
+#define PREEMPT_ACTIVE		0x40000000
+
+/*
+ * Thread information flags:
+ * - these are process state flags and used from assembly
+ * - pending work-to-be-done flags come first to fit in and immediate operand.
+ *
+ * TIF_SYSCALL_TRACE is known to be 0 via blbs.
+ */
+#define TIF_SYSCALL_TRACE	0	/* syscall trace active */
+#define TIF_SIGPENDING		1	/* signal pending */
+#define TIF_NEED_RESCHED	2	/* rescheduling necessary */
+#define TIF_POLLING_NRFLAG	3	/* poll_idle is polling NEED_RESCHED */
+#define TIF_DIE_IF_KERNEL	4	/* dik recursion lock */
+#define TIF_UAC_NOPRINT		5	/* see sysinfo.h */
+#define TIF_UAC_NOFIX		6
+#define TIF_UAC_SIGBUS		7
+#define TIF_MEMDIE		8
+#define TIF_RESTORE_SIGMASK	9	/* restore signal mask in do_signal */
+
+#define _TIF_SYSCALL_TRACE	(1<<TIF_SYSCALL_TRACE)
+#define _TIF_SIGPENDING		(1<<TIF_SIGPENDING)
+#define _TIF_NEED_RESCHED	(1<<TIF_NEED_RESCHED)
+#define _TIF_POLLING_NRFLAG	(1<<TIF_POLLING_NRFLAG)
+#define _TIF_RESTORE_SIGMASK	(1<<TIF_RESTORE_SIGMASK)
+
+/* Work to do on interrupt/exception return.  */
+#define _TIF_WORK_MASK		(_TIF_SIGPENDING | _TIF_NEED_RESCHED)
+
+/* Work to do on any return to userspace.  */
+#define _TIF_ALLWORK_MASK	(_TIF_WORK_MASK		\
+				 | _TIF_SYSCALL_TRACE)
+
+#define ALPHA_UAC_SHIFT		6
+#define ALPHA_UAC_MASK		(1 << TIF_UAC_NOPRINT | 1 << TIF_UAC_NOFIX | \
+				 1 << TIF_UAC_SIGBUS)
+
+#define SET_UNALIGN_CTL(task,value)	({				     \
+	task_thread_info(task)->flags = ((task_thread_info(task)->flags &    \
+		~ALPHA_UAC_MASK)					     \
+		| (((value) << ALPHA_UAC_SHIFT)       & (1<<TIF_UAC_NOPRINT))\
+		| (((value) << (ALPHA_UAC_SHIFT + 1)) & (1<<TIF_UAC_SIGBUS)) \
+		| (((value) << (ALPHA_UAC_SHIFT - 1)) & (1<<TIF_UAC_NOFIX)));\
+	0; })
+
+#define GET_UNALIGN_CTL(task,value)	({				\
+	put_user((task_thread_info(task)->flags & (1 << TIF_UAC_NOPRINT))\
+		  >> ALPHA_UAC_SHIFT					\
+		 | (task_thread_info(task)->flags & (1 << TIF_UAC_SIGBUS))\
+		 >> (ALPHA_UAC_SHIFT + 1)				\
+		 | (task_thread_info(task)->flags & (1 << TIF_UAC_NOFIX))\
+		 >> (ALPHA_UAC_SHIFT - 1),				\
+		 (int __user *)(value));				\
+	})
+
+#endif /* __KERNEL__ */
+#endif /* _ALPHA_THREAD_INFO_H */
diff --git a/include/asm-alpha/timex.h b/arch/alpha/include/asm/timex.h
index afa0c45e3e98..afa0c45e3e98 100644
--- a/include/asm-alpha/timex.h
+++ b/arch/alpha/include/asm/timex.h
diff --git a/include/asm-alpha/tlb.h b/arch/alpha/include/asm/tlb.h
index c13636575fba..c13636575fba 100644
--- a/include/asm-alpha/tlb.h
+++ b/arch/alpha/include/asm/tlb.h
diff --git a/include/asm-alpha/tlbflush.h b/arch/alpha/include/asm/tlbflush.h
index 9d87aaa08c0d..9d87aaa08c0d 100644
--- a/include/asm-alpha/tlbflush.h
+++ b/arch/alpha/include/asm/tlbflush.h
diff --git a/include/asm-alpha/topology.h b/arch/alpha/include/asm/topology.h
index 149532e162c4..149532e162c4 100644
--- a/include/asm-alpha/topology.h
+++ b/arch/alpha/include/asm/topology.h
diff --git a/include/asm-alpha/types.h b/arch/alpha/include/asm/types.h
index c1541353ccef..c1541353ccef 100644
--- a/include/asm-alpha/types.h
+++ b/arch/alpha/include/asm/types.h
diff --git a/include/asm-alpha/uaccess.h b/arch/alpha/include/asm/uaccess.h
index 22de3b434a22..22de3b434a22 100644
--- a/include/asm-alpha/uaccess.h
+++ b/arch/alpha/include/asm/uaccess.h
diff --git a/include/asm-alpha/ucontext.h b/arch/alpha/include/asm/ucontext.h
index 47578ab42152..47578ab42152 100644
--- a/include/asm-alpha/ucontext.h
+++ b/arch/alpha/include/asm/ucontext.h
diff --git a/include/asm-alpha/unaligned.h b/arch/alpha/include/asm/unaligned.h
index 3787c60aed3f..3787c60aed3f 100644
--- a/include/asm-alpha/unaligned.h
+++ b/arch/alpha/include/asm/unaligned.h
diff --git a/include/asm-alpha/unistd.h b/arch/alpha/include/asm/unistd.h
index 5b5c17485942..5b5c17485942 100644
--- a/include/asm-alpha/unistd.h
+++ b/arch/alpha/include/asm/unistd.h
diff --git a/include/asm-alpha/user.h b/arch/alpha/include/asm/user.h
index a4eb6a4ca8d1..a4eb6a4ca8d1 100644
--- a/include/asm-alpha/user.h
+++ b/arch/alpha/include/asm/user.h
diff --git a/include/asm-alpha/vga.h b/arch/alpha/include/asm/vga.h
index c00106bac521..c00106bac521 100644
--- a/include/asm-alpha/vga.h
+++ b/arch/alpha/include/asm/vga.h
diff --git a/include/asm-alpha/xor.h b/arch/alpha/include/asm/xor.h
index 5ee1c2bc0499..5ee1c2bc0499 100644
--- a/include/asm-alpha/xor.h
+++ b/arch/alpha/include/asm/xor.h
diff --git a/arch/alpha/kernel/osf_sys.c b/arch/alpha/kernel/osf_sys.c
index 32ca1b927307..8509dad31204 100644
--- a/arch/alpha/kernel/osf_sys.c
+++ b/arch/alpha/kernel/osf_sys.c
@@ -121,24 +121,29 @@ osf_filldir(void *__buf, const char *name, int namlen, loff_t offset,
 	if (reclen > buf->count)
 		return -EINVAL;
 	d_ino = ino;
-	if (sizeof(d_ino) < sizeof(ino) && d_ino != ino)
+	if (sizeof(d_ino) < sizeof(ino) && d_ino != ino) {
+		buf->error = -EOVERFLOW;
 		return -EOVERFLOW;
+	}
 	if (buf->basep) {
 		if (put_user(offset, buf->basep))
-			return -EFAULT;
+			goto Efault;
 		buf->basep = NULL;
 	}
 	dirent = buf->dirent;
-	put_user(d_ino, &dirent->d_ino);
-	put_user(namlen, &dirent->d_namlen);
-	put_user(reclen, &dirent->d_reclen);
-	if (copy_to_user(dirent->d_name, name, namlen) ||
+	if (put_user(d_ino, &dirent->d_ino) ||
+	    put_user(namlen, &dirent->d_namlen) ||
+	    put_user(reclen, &dirent->d_reclen) ||
+	    copy_to_user(dirent->d_name, name, namlen) ||
 	    put_user(0, dirent->d_name + namlen))
-		return -EFAULT;
+		goto Efault;
 	dirent = (void __user *)dirent + reclen;
 	buf->dirent = dirent;
 	buf->count -= reclen;
 	return 0;
+Efault:
+	buf->error = -EFAULT;
+	return -EFAULT;
 }
 
 asmlinkage int
@@ -253,15 +258,15 @@ do_osf_statfs(struct dentry * dentry, struct osf_statfs __user *buffer,
 }
 
 asmlinkage int
-osf_statfs(char __user *path, struct osf_statfs __user *buffer, unsigned long bufsiz)
+osf_statfs(char __user *pathname, struct osf_statfs __user *buffer, unsigned long bufsiz)
 {
-	struct nameidata nd;
+	struct path path;
 	int retval;
 
-	retval = user_path_walk(path, &nd);
+	retval = user_path(pathname, &path);
 	if (!retval) {
-		retval = do_osf_statfs(nd.path.dentry, buffer, bufsiz);
-		path_put(&nd.path);
+		retval = do_osf_statfs(path.dentry, buffer, bufsiz);
+		path_put(&path);
 	}
 	return retval;
 }
diff --git a/arch/alpha/mm/init.c b/arch/alpha/mm/init.c
index 40c15e7301de..234e42b8ee74 100644
--- a/arch/alpha/mm/init.c
+++ b/arch/alpha/mm/init.c
@@ -94,36 +94,6 @@ __bad_page(void)
 	return pte_mkdirty(mk_pte(virt_to_page(EMPTY_PGE), PAGE_SHARED));
 }
 
-#ifndef CONFIG_DISCONTIGMEM
-void
-show_mem(void)
-{
-	long i,free = 0,total = 0,reserved = 0;
-	long shared = 0, cached = 0;
-
-	printk("\nMem-info:\n");
-	show_free_areas();
-	printk("Free swap:       %6ldkB\n", nr_swap_pages<<(PAGE_SHIFT-10));
-	i = max_mapnr;
-	while (i-- > 0) {
-		total++;
-		if (PageReserved(mem_map+i))
-			reserved++;
-		else if (PageSwapCache(mem_map+i))
-			cached++;
-		else if (!page_count(mem_map+i))
-			free++;
-		else
-			shared += page_count(mem_map + i) - 1;
-	}
-	printk("%ld pages of RAM\n",total);
-	printk("%ld free pages\n",free);
-	printk("%ld reserved pages\n",reserved);
-	printk("%ld pages shared\n",shared);
-	printk("%ld pages swap cached\n",cached);
-}
-#endif
-
 static inline unsigned long
 load_PCB(struct pcb_struct *pcb)
 {
diff --git a/arch/alpha/mm/numa.c b/arch/alpha/mm/numa.c
index d8c4ceaf00b9..a13de49d1265 100644
--- a/arch/alpha/mm/numa.c
+++ b/arch/alpha/mm/numa.c
@@ -359,38 +359,3 @@ void __init mem_init(void)
 	mem_stress();
 #endif
 }
-
-void
-show_mem(void)
-{
-	long i,free = 0,total = 0,reserved = 0;
-	long shared = 0, cached = 0;
-	int nid;
-
-	printk("\nMem-info:\n");
-	show_free_areas();
-	printk("Free swap:       %6ldkB\n", nr_swap_pages<<(PAGE_SHIFT-10));
-	for_each_online_node(nid) {
-		unsigned long flags;
-		pgdat_resize_lock(NODE_DATA(nid), &flags);
-		i = node_spanned_pages(nid);
-		while (i-- > 0) {
-			struct page *page = nid_page_nr(nid, i);
-			total++;
-			if (PageReserved(page))
-				reserved++;
-			else if (PageSwapCache(page))
-				cached++;
-			else if (!page_count(page))
-				free++;
-			else
-				shared += page_count(page) - 1;
-		}
-		pgdat_resize_unlock(NODE_DATA(nid), &flags);
-	}
-	printk("%ld pages of RAM\n",total);
-	printk("%ld free pages\n",free);
-	printk("%ld reserved pages\n",reserved);
-	printk("%ld pages shared\n",shared);
-	printk("%ld pages swap cached\n",cached);
-}
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 6fb4f03369f2..70dba1668907 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -17,6 +17,7 @@ config ARM
 	select HAVE_KRETPROBES if (HAVE_KPROBES)
 	select HAVE_FTRACE if (!XIP_KERNEL)
 	select HAVE_DYNAMIC_FTRACE if (HAVE_FTRACE)
+	select HAVE_GENERIC_DMA_COHERENT
 	help
 	  The ARM series is a line of low-power-consumption RISC chip designs
 	  licensed by ARM Ltd and targeted at embedded applications and
@@ -234,6 +235,7 @@ config ARCH_VERSATILE
 config ARCH_AT91
 	bool "Atmel AT91"
 	select GENERIC_GPIO
+	select HAVE_CLK
 	help
 	  This enables support for systems based on the Atmel AT91RM9200,
 	  AT91SAM9 and AT91CAP9 processors.
@@ -267,8 +269,7 @@ config ARCH_EP93XX
 	select ARM_VIC
 	select GENERIC_GPIO
 	select HAVE_CLK
-	select HAVE_CLK
-	select HAVE_GPIO_LIB
+	select ARCH_REQUIRE_GPIOLIB
 	help
 	  This enables support for the Cirrus EP93xx series of CPUs.
 
@@ -314,7 +315,7 @@ config ARCH_IOP32X
 	select PLAT_IOP
 	select PCI
 	select GENERIC_GPIO
-	select HAVE_GPIO_LIB
+	select ARCH_REQUIRE_GPIOLIB
 	help
 	  Support for Intel's 80219 and IOP32X (XScale) family of
 	  processors.
@@ -325,7 +326,7 @@ config ARCH_IOP33X
 	select PLAT_IOP
 	select PCI
 	select GENERIC_GPIO
-	select HAVE_GPIO_LIB
+	select ARCH_REQUIRE_GPIOLIB
 	help
 	  Support for Intel's IOP33X (XScale) family of processors.
 
@@ -418,7 +419,7 @@ config ARCH_MXC
 	select GENERIC_CLOCKEVENTS
 	select ARCH_MTD_XIP
 	select GENERIC_GPIO
-	select HAVE_GPIO_LIB
+	select ARCH_REQUIRE_GPIOLIB
 	help
 	  Support for Freescale MXC/iMX-based family of processors
 
@@ -447,7 +448,7 @@ config ARCH_PXA
 	select ARCH_MTD_XIP
 	select GENERIC_GPIO
 	select HAVE_CLK
-	select HAVE_GPIO_LIB
+	select ARCH_REQUIRE_GPIOLIB
 	select GENERIC_TIME
 	select GENERIC_CLOCKEVENTS
 	select TICK_ONESHOT
@@ -479,7 +480,7 @@ config ARCH_SA1100
 	select GENERIC_CLOCKEVENTS
 	select HAVE_CLK
 	select TICK_ONESHOT
-	select HAVE_GPIO_LIB
+	select ARCH_REQUIRE_GPIOLIB
 	help
 	  Support for StrongARM 11x0 based boards.
 
@@ -522,7 +523,7 @@ config ARCH_OMAP
 	bool "TI OMAP"
 	select GENERIC_GPIO
 	select HAVE_CLK
-	select HAVE_GPIO_LIB
+	select ARCH_REQUIRE_GPIOLIB
 	select GENERIC_TIME
 	select GENERIC_CLOCKEVENTS
 	help
@@ -809,6 +810,11 @@ config OABI_COMPAT
 	  UNPREDICTABLE (in fact it can be predicted that it won't work
 	  at all). If in doubt say Y.
 
+config ARCH_FLATMEM_HAS_HOLES
+	bool
+	default y
+	depends on FLATMEM
+
 config ARCH_DISCONTIGMEM_ENABLE
 	bool
 	default (ARCH_LH7A40X && !LH7A40X_CONTIGMEM)
@@ -1224,6 +1230,8 @@ source "drivers/dma/Kconfig"
 
 source "drivers/dca/Kconfig"
 
+source "drivers/regulator/Kconfig"
+
 source "drivers/uio/Kconfig"
 
 endmenu
diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index b20995a82e04..703a44fa0f9b 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -67,7 +67,7 @@ tune-$(CONFIG_CPU_ARM720T)	:=-mtune=arm7tdmi
 tune-$(CONFIG_CPU_ARM740T)	:=-mtune=arm7tdmi
 tune-$(CONFIG_CPU_ARM9TDMI)	:=-mtune=arm9tdmi
 tune-$(CONFIG_CPU_ARM940T)	:=-mtune=arm9tdmi
-tune-$(CONFIG_CPU_ARM946T)	:=$(call cc-option,-mtune=arm9e,-mtune=arm9tdmi)
+tune-$(CONFIG_CPU_ARM946E)	:=$(call cc-option,-mtune=arm9e,-mtune=arm9tdmi)
 tune-$(CONFIG_CPU_ARM920T)	:=-mtune=arm9tdmi
 tune-$(CONFIG_CPU_ARM922T)	:=-mtune=arm9tdmi
 tune-$(CONFIG_CPU_ARM925T)	:=-mtune=arm9tdmi
@@ -97,9 +97,7 @@ textofs-y	:= 0x00008000
  machine-$(CONFIG_ARCH_RPC)	   := rpc
  machine-$(CONFIG_ARCH_EBSA110)	   := ebsa110
  machine-$(CONFIG_ARCH_CLPS7500)   := clps7500
-  incdir-$(CONFIG_ARCH_CLPS7500)   := cl7500
  machine-$(CONFIG_FOOTBRIDGE)	   := footbridge
-  incdir-$(CONFIG_FOOTBRIDGE)	   := ebsa285
  machine-$(CONFIG_ARCH_SHARK)	   := shark
  machine-$(CONFIG_ARCH_SA1100)	   := sa1100
 ifeq ($(CONFIG_ARCH_SA1100),y)
@@ -114,13 +112,15 @@ endif
  machine-$(CONFIG_ARCH_IOP32X)	   := iop32x
  machine-$(CONFIG_ARCH_IOP33X)	   := iop33x
  machine-$(CONFIG_ARCH_IOP13XX)	   := iop13xx
+    plat-$(CONFIG_PLAT_IOP)	   := iop
  machine-$(CONFIG_ARCH_IXP4XX)	   := ixp4xx
  machine-$(CONFIG_ARCH_IXP2000)    := ixp2000
  machine-$(CONFIG_ARCH_IXP23XX)    := ixp23xx
  machine-$(CONFIG_ARCH_OMAP1)	   := omap1
  machine-$(CONFIG_ARCH_OMAP2)	   := omap2
-  incdir-$(CONFIG_ARCH_OMAP)	   := omap
- machine-$(CONFIG_ARCH_S3C2410)	   := s3c2410
+    plat-$(CONFIG_ARCH_OMAP)	   := omap
+ machine-$(CONFIG_ARCH_S3C2410)	   := s3c2410 s3c2400 s3c2412 s3c2440 s3c2442 s3c2443
+    plat-$(CONFIG_PLAT_S3C24XX)	   := s3c24xx
  machine-$(CONFIG_ARCH_LH7A40X)	   := lh7a40x
  machine-$(CONFIG_ARCH_VERSATILE)  := versatile
  machine-$(CONFIG_ARCH_IMX)	   := imx
@@ -135,10 +135,11 @@ endif
  machine-$(CONFIG_ARCH_DAVINCI)	   := davinci
  machine-$(CONFIG_ARCH_KIRKWOOD)   := kirkwood
  machine-$(CONFIG_ARCH_KS8695)     := ks8695
-  incdir-$(CONFIG_ARCH_MXC)	   := mxc
+    plat-$(CONFIG_ARCH_MXC)	   := mxc
  machine-$(CONFIG_ARCH_MX2)	   := mx2
  machine-$(CONFIG_ARCH_MX3)	   := mx3
  machine-$(CONFIG_ARCH_ORION5X)	   := orion5x
+    plat-$(CONFIG_PLAT_ORION)	   := orion
  machine-$(CONFIG_ARCH_MSM7X00A)   := msm
  machine-$(CONFIG_ARCH_LOKI)       := loki
  machine-$(CONFIG_ARCH_MV78XX0)    := mv78xx0
@@ -153,17 +154,22 @@ endif
 # The byte offset of the kernel image in RAM from the start of RAM.
 TEXT_OFFSET := $(textofs-y)
 
-ifeq ($(incdir-y),)
-incdir-y := $(machine-y)
-endif
-INCDIR   := arch-$(incdir-y)
-
+# The first directory contains additional information for the boot setup code
 ifneq ($(machine-y),)
-MACHINE  := arch/arm/mach-$(machine-y)/
+MACHINE  := arch/arm/mach-$(word 1,$(machine-y))/
 else
 MACHINE  :=
 endif
 
+machdirs := $(patsubst %,arch/arm/mach-%/,$(machine-y))
+platdirs := $(patsubst %,arch/arm/plat-%/,$(plat-y))
+
+ifeq ($(KBUILD_SRC),)
+KBUILD_CPPFLAGS += $(patsubst %,-I%include,$(machdirs) $(platdirs))
+else
+KBUILD_CPPFLAGS += $(patsubst %,-I$(srctree)/%include,$(machdirs) $(platdirs))
+endif
+
 export	TEXT_OFFSET GZFLAGS MMUEXT
 
 # Do we have FASTFPE?
@@ -174,23 +180,11 @@ endif
 
 # If we have a machine-specific directory, then include it in the build.
 core-y				+= arch/arm/kernel/ arch/arm/mm/ arch/arm/common/
-core-y				+= $(MACHINE)
-core-$(CONFIG_ARCH_S3C2410)	+= arch/arm/mach-s3c2400/
-core-$(CONFIG_ARCH_S3C2410)	+= arch/arm/mach-s3c2412/
-core-$(CONFIG_ARCH_S3C2410)	+= arch/arm/mach-s3c2440/
-core-$(CONFIG_ARCH_S3C2410)	+= arch/arm/mach-s3c2442/
-core-$(CONFIG_ARCH_S3C2410)	+= arch/arm/mach-s3c2443/
+core-y				+= $(machdirs) $(platdirs)
 core-$(CONFIG_FPE_NWFPE)	+= arch/arm/nwfpe/
 core-$(CONFIG_FPE_FASTFPE)	+= $(FASTFPE_OBJ)
 core-$(CONFIG_VFP)		+= arch/arm/vfp/
 
-# If we have a common platform directory, then include it in the build.
-core-$(CONFIG_PLAT_IOP)		+= arch/arm/plat-iop/
-core-$(CONFIG_PLAT_ORION)		+= arch/arm/plat-orion/
-core-$(CONFIG_ARCH_OMAP)	+= arch/arm/plat-omap/
-core-$(CONFIG_PLAT_S3C24XX)		+= arch/arm/plat-s3c24xx/
-core-$(CONFIG_ARCH_MXC)		+= arch/arm/plat-mxc/
-
 drivers-$(CONFIG_OPROFILE)      += arch/arm/oprofile/
 
 libs-y				:= arch/arm/lib/ $(libs-y)
@@ -210,20 +204,10 @@ boot := arch/arm/boot
 #	them changed.  We use .arch to indicate when they were updated
 #	last, otherwise make uses the target directory mtime.
 
-include/asm-arm/.arch: $(wildcard include/config/arch/*.h) include/config/auto.conf
-	@echo '  SYMLINK include/asm-arm/arch -> include/asm-arm/$(INCDIR)'
-ifneq ($(KBUILD_SRC),)
-	$(Q)mkdir -p include/asm-arm
-	$(Q)ln -fsn $(srctree)/include/asm-arm/$(INCDIR) include/asm-arm/arch
-else
-	$(Q)ln -fsn $(INCDIR) include/asm-arm/arch
-endif
-	@touch $@
-
 archprepare: maketools
 
 PHONY += maketools FORCE
-maketools: include/linux/version.h include/asm-arm/.arch FORCE
+maketools: include/linux/version.h FORCE
 	$(Q)$(MAKE) $(build)=arch/arm/tools include/asm-arm/mach-types.h
 
 # Convert bzImage to zImage
diff --git a/arch/arm/boot/compressed/.gitignore b/arch/arm/boot/compressed/.gitignore
index b15f927a5926..ab204db594d3 100644
--- a/arch/arm/boot/compressed/.gitignore
+++ b/arch/arm/boot/compressed/.gitignore
@@ -1,2 +1,3 @@
-piggy.gz
 font.c
+piggy.gz
+vmlinux.lds
diff --git a/arch/arm/boot/compressed/Makefile b/arch/arm/boot/compressed/Makefile
index 95baac4939e0..94462a097f86 100644
--- a/arch/arm/boot/compressed/Makefile
+++ b/arch/arm/boot/compressed/Makefile
@@ -112,6 +112,3 @@ $(obj)/font.c: $(FONTC)
 
 $(obj)/vmlinux.lds: $(obj)/vmlinux.lds.in arch/arm/boot/Makefile .config
 	@sed "$(SEDFLAGS)" < $< > $@
-
-$(obj)/misc.o: $(obj)/misc.c include/asm/arch/uncompress.h lib/inflate.c
-
diff --git a/arch/arm/boot/compressed/head-xscale.S b/arch/arm/boot/compressed/head-xscale.S
index dd3fbd6766e1..aa5ee49c5c5a 100644
--- a/arch/arm/boot/compressed/head-xscale.S
+++ b/arch/arm/boot/compressed/head-xscale.S
@@ -6,7 +6,6 @@
  */
 
 #include <linux/linkage.h>
-#include <asm/mach-types.h>
 
 		.section        ".start", "ax"
 
diff --git a/arch/arm/boot/compressed/head.S b/arch/arm/boot/compressed/head.S
index de41daeab5e9..d42f89b7760b 100644
--- a/arch/arm/boot/compressed/head.S
+++ b/arch/arm/boot/compressed/head.S
@@ -37,7 +37,7 @@
 
 #else
 
-#include <asm/arch/debug-macro.S>
+#include <mach/debug-macro.S>
 
 		.macro	writeb,	ch, rb
 		senduart \ch, \rb
diff --git a/arch/arm/boot/compressed/misc.c b/arch/arm/boot/compressed/misc.c
index 9b444022cb9b..65ce8fff29db 100644
--- a/arch/arm/boot/compressed/misc.c
+++ b/arch/arm/boot/compressed/misc.c
@@ -27,7 +27,7 @@ unsigned int __machine_arch_type;
 static void putstr(const char *ptr);
 
 #include <linux/compiler.h>
-#include <asm/arch/uncompress.h>
+#include <mach/uncompress.h>
 
 #ifdef CONFIG_DEBUG_ICEDCC
 
@@ -217,8 +217,6 @@ static unsigned outcnt;		/* bytes in output buffer */
 static int  fill_inbuf(void);
 static void flush_window(void);
 static void error(char *m);
-static void gzip_mark(void **);
-static void gzip_release(void **);
 
 extern char input_data[];
 extern char input_data_end[];
@@ -227,64 +225,21 @@ static uch *output_data;
 static ulg output_ptr;
 static ulg bytes_out;
 
-static void *malloc(int size);
-static void free(void *where);
 static void error(char *m);
-static void gzip_mark(void **);
-static void gzip_release(void **);
 
 static void putstr(const char *);
 
 extern int end;
 static ulg free_mem_ptr;
-static ulg free_mem_ptr_end;
+static ulg free_mem_end_ptr;
 
-#define HEAP_SIZE 0x3000
-
-#include "../../../../lib/inflate.c"
-
-#ifndef STANDALONE_DEBUG
-static void *malloc(int size)
-{
-	void *p;
-
-	if (size <0) error("Malloc error");
-	if (free_mem_ptr <= 0) error("Memory error");
-
-	free_mem_ptr = (free_mem_ptr + 3) & ~3;	/* Align */
-
-	p = (void *)free_mem_ptr;
-	free_mem_ptr += size;
-
-	if (free_mem_ptr >= free_mem_ptr_end)
-		error("Out of memory");
-	return p;
-}
-
-static void free(void *where)
-{ /* gzip_mark & gzip_release do the free */
-}
-
-static void gzip_mark(void **ptr)
-{
-	arch_decomp_wdog();
-	*ptr = (void *) free_mem_ptr;
-}
+#ifdef STANDALONE_DEBUG
+#define NO_INFLATE_MALLOC
+#endif
 
-static void gzip_release(void **ptr)
-{
-	arch_decomp_wdog();
-	free_mem_ptr = (long) *ptr;
-}
-#else
-static void gzip_mark(void **ptr)
-{
-}
+#define ARCH_HAS_DECOMP_WDOG
 
-static void gzip_release(void **ptr)
-{
-}
-#endif
+#include "../../../../lib/inflate.c"
 
 /* ===========================================================================
  * Fill the input buffer. This is called only when the buffer is empty
@@ -348,7 +303,7 @@ decompress_kernel(ulg output_start, ulg free_mem_ptr_p, ulg free_mem_ptr_end_p,
 {
 	output_data		= (uch *)output_start;	/* Points to kernel start */
 	free_mem_ptr		= free_mem_ptr_p;
-	free_mem_ptr_end	= free_mem_ptr_end_p;
+	free_mem_end_ptr	= free_mem_ptr_end_p;
 	__machine_arch_type	= arch_id;
 
 	arch_decomp_setup();
diff --git a/arch/arm/common/dmabounce.c b/arch/arm/common/dmabounce.c
index dd2947342604..aecc6c3f908f 100644
--- a/arch/arm/common/dmabounce.c
+++ b/arch/arm/common/dmabounce.c
@@ -246,9 +246,9 @@ map_single(struct device *dev, void *ptr, size_t size,
 		}
 
 		dev_dbg(dev,
-			"%s: unsafe buffer %p (phy=%p) mapped to %p (phy=%p)\n",
-			__func__, buf->ptr, (void *) virt_to_dma(dev, buf->ptr),
-			buf->safe, (void *) buf->safe_dma_addr);
+			"%s: unsafe buffer %p (dma=%#x) mapped to %p (dma=%#x)\n",
+			__func__, buf->ptr, virt_to_dma(dev, buf->ptr),
+			buf->safe, buf->safe_dma_addr);
 
 		if ((dir == DMA_TO_DEVICE) ||
 		    (dir == DMA_BIDIRECTIONAL)) {
@@ -280,7 +280,7 @@ unmap_single(struct device *dev, dma_addr_t dma_addr, size_t size,
 	/*
 	 * Trying to unmap an invalid mapping
 	 */
-	if (dma_mapping_error(dma_addr)) {
+	if (dma_mapping_error(dev, dma_addr)) {
 		dev_err(dev, "Trying to unmap invalid mapping\n");
 		return;
 	}
@@ -292,9 +292,9 @@ unmap_single(struct device *dev, dma_addr_t dma_addr, size_t size,
 		BUG_ON(buf->size != size);
 
 		dev_dbg(dev,
-			"%s: unsafe buffer %p (phy=%p) mapped to %p (phy=%p)\n",
-			__func__, buf->ptr, (void *) virt_to_dma(dev, buf->ptr),
-			buf->safe, (void *) buf->safe_dma_addr);
+			"%s: unsafe buffer %p (dma=%#x) mapped to %p (dma=%#x)\n",
+			__func__, buf->ptr, virt_to_dma(dev, buf->ptr),
+			buf->safe, buf->safe_dma_addr);
 
 		DO_STATS ( device_info->bounce_count++ );
 
@@ -321,9 +321,8 @@ unmap_single(struct device *dev, dma_addr_t dma_addr, size_t size,
 	}
 }
 
-static inline void
-sync_single(struct device *dev, dma_addr_t dma_addr, size_t size,
-		enum dma_data_direction dir)
+static int sync_single(struct device *dev, dma_addr_t dma_addr, size_t size,
+			enum dma_data_direction dir)
 {
 	struct dmabounce_device_info *device_info = dev->archdata.dmabounce;
 	struct safe_buffer *buf = NULL;
@@ -355,9 +354,9 @@ sync_single(struct device *dev, dma_addr_t dma_addr, size_t size,
 		 */
 
 		dev_dbg(dev,
-			"%s: unsafe buffer %p (phy=%p) mapped to %p (phy=%p)\n",
-			__func__, buf->ptr, (void *) virt_to_dma(dev, buf->ptr),
-			buf->safe, (void *) buf->safe_dma_addr);
+			"%s: unsafe buffer %p (dma=%#x) mapped to %p (dma=%#x)\n",
+			__func__, buf->ptr, virt_to_dma(dev, buf->ptr),
+			buf->safe, buf->safe_dma_addr);
 
 		DO_STATS ( device_info->bounce_count++ );
 
@@ -383,8 +382,9 @@ sync_single(struct device *dev, dma_addr_t dma_addr, size_t size,
 		 * No need to sync the safe buffer - it was allocated
 		 * via the coherent allocators.
 		 */
+		return 0;
 	} else {
-		dma_cache_maint(dma_to_virt(dev, dma_addr), size, dir);
+		return 1;
 	}
 }
 
@@ -474,25 +474,29 @@ dma_unmap_sg(struct device *dev, struct scatterlist *sg, int nents,
 	}
 }
 
-void
-dma_sync_single_for_cpu(struct device *dev, dma_addr_t dma_addr, size_t size,
-				enum dma_data_direction dir)
+void dma_sync_single_range_for_cpu(struct device *dev, dma_addr_t dma_addr,
+				   unsigned long offset, size_t size,
+				   enum dma_data_direction dir)
 {
-	dev_dbg(dev, "%s(ptr=%p,size=%d,dir=%x)\n",
-		__func__, (void *) dma_addr, size, dir);
+	dev_dbg(dev, "%s(dma=%#x,off=%#lx,size=%zx,dir=%x)\n",
+		__func__, dma_addr, offset, size, dir);
 
-	sync_single(dev, dma_addr, size, dir);
+	if (sync_single(dev, dma_addr, offset + size, dir))
+		dma_cache_maint(dma_to_virt(dev, dma_addr) + offset, size, dir);
 }
+EXPORT_SYMBOL(dma_sync_single_range_for_cpu);
 
-void
-dma_sync_single_for_device(struct device *dev, dma_addr_t dma_addr, size_t size,
-				enum dma_data_direction dir)
+void dma_sync_single_range_for_device(struct device *dev, dma_addr_t dma_addr,
+				      unsigned long offset, size_t size,
+				      enum dma_data_direction dir)
 {
-	dev_dbg(dev, "%s(ptr=%p,size=%d,dir=%x)\n",
-		__func__, (void *) dma_addr, size, dir);
+	dev_dbg(dev, "%s(dma=%#x,off=%#lx,size=%zx,dir=%x)\n",
+		__func__, dma_addr, offset, size, dir);
 
-	sync_single(dev, dma_addr, size, dir);
+	if (sync_single(dev, dma_addr, offset + size, dir))
+		dma_cache_maint(dma_to_virt(dev, dma_addr) + offset, size, dir);
 }
+EXPORT_SYMBOL(dma_sync_single_range_for_device);
 
 void
 dma_sync_sg_for_cpu(struct device *dev, struct scatterlist *sg, int nents,
@@ -644,8 +648,6 @@ EXPORT_SYMBOL(dma_map_single);
 EXPORT_SYMBOL(dma_unmap_single);
 EXPORT_SYMBOL(dma_map_sg);
 EXPORT_SYMBOL(dma_unmap_sg);
-EXPORT_SYMBOL(dma_sync_single_for_cpu);
-EXPORT_SYMBOL(dma_sync_single_for_device);
 EXPORT_SYMBOL(dma_sync_sg_for_cpu);
 EXPORT_SYMBOL(dma_sync_sg_for_device);
 EXPORT_SYMBOL(dmabounce_register_dev);
diff --git a/arch/arm/common/locomo.c b/arch/arm/common/locomo.c
index c3c3a3339049..283051eaf931 100644
--- a/arch/arm/common/locomo.c
+++ b/arch/arm/common/locomo.c
@@ -25,7 +25,7 @@
 #include <linux/slab.h>
 #include <linux/spinlock.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 #include <asm/irq.h>
 #include <asm/mach/irq.h>
@@ -331,17 +331,17 @@ static int locomo_gpio_type(unsigned int irq, unsigned int type)
 
 	mask = 1 << (irq - LOCOMO_IRQ_GPIO_START);
 
-	if (type == IRQT_PROBE) {
+	if (type == IRQ_TYPE_PROBE) {
 		if ((GPIO_IRQ_rising_edge | GPIO_IRQ_falling_edge) & mask)
 			return 0;
-		type = __IRQT_RISEDGE | __IRQT_FALEDGE;
+		type = IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING;
 	}
 
-	if (type & __IRQT_RISEDGE)
+	if (type & IRQ_TYPE_EDGE_RISING)
 		GPIO_IRQ_rising_edge |= mask;
 	else
 		GPIO_IRQ_rising_edge &= ~mask;
-	if (type & __IRQT_FALEDGE)
+	if (type & IRQ_TYPE_EDGE_FALLING)
 		GPIO_IRQ_falling_edge |= mask;
 	else
 		GPIO_IRQ_falling_edge &= ~mask;
@@ -473,7 +473,7 @@ static void locomo_setup_irq(struct locomo *lchip)
 	/*
 	 * Install handler for IRQ_LOCOMO_HW.
 	 */
-	set_irq_type(lchip->irq, IRQT_FALLING);
+	set_irq_type(lchip->irq, IRQ_TYPE_EDGE_FALLING);
 	set_irq_chip_data(lchip->irq, irqbase);
 	set_irq_chained_handler(lchip->irq, locomo_handler);
 
diff --git a/arch/arm/common/sa1111.c b/arch/arm/common/sa1111.c
index 0a8e1ff2af8a..ec8a5471bf06 100644
--- a/arch/arm/common/sa1111.c
+++ b/arch/arm/common/sa1111.c
@@ -26,7 +26,7 @@
 #include <linux/dma-mapping.h>
 #include <linux/clk.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/io.h>
 #include <asm/irq.h>
@@ -241,14 +241,14 @@ static int sa1111_type_lowirq(unsigned int irq, unsigned int flags)
 	void __iomem *mapbase = get_irq_chip_data(irq);
 	unsigned long ip0;
 
-	if (flags == IRQT_PROBE)
+	if (flags == IRQ_TYPE_PROBE)
 		return 0;
 
-	if ((!(flags & __IRQT_RISEDGE) ^ !(flags & __IRQT_FALEDGE)) == 0)
+	if ((!(flags & IRQ_TYPE_EDGE_RISING) ^ !(flags & IRQ_TYPE_EDGE_FALLING)) == 0)
 		return -EINVAL;
 
 	ip0 = sa1111_readl(mapbase + SA1111_INTPOL0);
-	if (flags & __IRQT_RISEDGE)
+	if (flags & IRQ_TYPE_EDGE_RISING)
 		ip0 &= ~mask;
 	else
 		ip0 |= mask;
@@ -338,14 +338,14 @@ static int sa1111_type_highirq(unsigned int irq, unsigned int flags)
 	void __iomem *mapbase = get_irq_chip_data(irq);
 	unsigned long ip1;
 
-	if (flags == IRQT_PROBE)
+	if (flags == IRQ_TYPE_PROBE)
 		return 0;
 
-	if ((!(flags & __IRQT_RISEDGE) ^ !(flags & __IRQT_FALEDGE)) == 0)
+	if ((!(flags & IRQ_TYPE_EDGE_RISING) ^ !(flags & IRQ_TYPE_EDGE_FALLING)) == 0)
 		return -EINVAL;
 
 	ip1 = sa1111_readl(mapbase + SA1111_INTPOL1);
-	if (flags & __IRQT_RISEDGE)
+	if (flags & IRQ_TYPE_EDGE_RISING)
 		ip1 &= ~mask;
 	else
 		ip1 |= mask;
@@ -427,7 +427,7 @@ static void sa1111_setup_irq(struct sa1111 *sachip)
 	/*
 	 * Register SA1111 interrupt
 	 */
-	set_irq_type(sachip->irq, IRQT_RISING);
+	set_irq_type(sachip->irq, IRQ_TYPE_EDGE_RISING);
 	set_irq_data(sachip->irq, irqbase);
 	set_irq_chained_handler(sachip->irq, sa1111_irq_handler);
 }
diff --git a/arch/arm/common/sharpsl_pm.c b/arch/arm/common/sharpsl_pm.c
index 8822b684d474..db8309161408 100644
--- a/arch/arm/common/sharpsl_pm.c
+++ b/arch/arm/common/sharpsl_pm.c
@@ -26,13 +26,12 @@
 #include <linux/apm-emulation.h>
 #include <linux/suspend.h>
 
-#include <asm/hardware.h>
-#include <asm/mach-types.h>
+#include <mach/hardware.h>
 #include <asm/irq.h>
-#include <asm/arch/pm.h>
-#include <asm/arch/pxa-regs.h>
-#include <asm/arch/pxa2xx-regs.h>
-#include <asm/arch/sharpsl.h>
+#include <mach/pm.h>
+#include <mach/pxa-regs.h>
+#include <mach/pxa2xx-regs.h>
+#include <mach/sharpsl.h>
 #include <asm/hardware/sharpsl_pm.h>
 
 /*
diff --git a/arch/arm/common/time-acorn.c b/arch/arm/common/time-acorn.c
index d544da414731..df0983aafe69 100644
--- a/arch/arm/common/time-acorn.c
+++ b/arch/arm/common/time-acorn.c
@@ -18,7 +18,7 @@
 #include <linux/interrupt.h>
 #include <linux/irq.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 #include <asm/hardware/ioc.h>
 
diff --git a/arch/arm/common/uengine.c b/arch/arm/common/uengine.c
index 117cab30bd36..7ecd3c0ab011 100644
--- a/arch/arm/common/uengine.c
+++ b/arch/arm/common/uengine.c
@@ -16,8 +16,7 @@
 #include <linux/slab.h>
 #include <linux/module.h>
 #include <linux/string.h>
-#include <asm/hardware.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/hardware/uengine.h>
 #include <asm/io.h>
 
diff --git a/arch/arm/configs/ams_delta_defconfig b/arch/arm/configs/ams_delta_defconfig
new file mode 100644
index 000000000000..2c4aa11f0b0d
--- /dev/null
+++ b/arch/arm/configs/ams_delta_defconfig
@@ -0,0 +1,1314 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.22-rc1-omap1
+# Thu Jun  7 04:28:32 2007
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_MMU=y
+# CONFIG_NO_IOPORT is not set
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_ZONE_DMA=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# Code maturity level options
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+
+#
+# General setup
+#
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+# CONFIG_SWAP is not set
+CONFIG_SYSVIPC=y
+# CONFIG_IPC_NS is not set
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_UTS_NS is not set
+# CONFIG_AUDIT is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_SYSFS_DEPRECATED=y
+# CONFIG_RELAY is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+# CONFIG_EMBEDDED is not set
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+
+#
+# Loadable module support
+#
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODULE_FORCE_UNLOAD=y
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
+
+#
+# Block layer
+#
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+
+#
+# System Type
+#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS7500 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_CO285 is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_DAVINCI is not set
+CONFIG_ARCH_OMAP=y
+
+#
+# TI OMAP Implementations
+#
+CONFIG_ARCH_OMAP1=y
+# CONFIG_ARCH_OMAP2 is not set
+
+#
+# OMAP Feature Selections
+#
+# CONFIG_OMAP_RESET_CLOCKS is not set
+# CONFIG_OMAP_BOOT_TAG is not set
+# CONFIG_OMAP_GPIO_SWITCH is not set
+CONFIG_OMAP_MUX=y
+# CONFIG_OMAP_MUX_DEBUG is not set
+CONFIG_OMAP_MUX_WARNINGS=y
+CONFIG_OMAP_MCBSP=y
+CONFIG_OMAP_MMU_FWK=y
+CONFIG_OMAP_MBOX_FWK=m
+CONFIG_OMAP_MPU_TIMER=y
+# CONFIG_OMAP_32K_TIMER is not set
+CONFIG_OMAP_LL_DEBUG_UART1=y
+# CONFIG_OMAP_LL_DEBUG_UART2 is not set
+# CONFIG_OMAP_LL_DEBUG_UART3 is not set
+# CONFIG_OMAP_LL_DEBUG_LCD is not set
+CONFIG_OMAP_SERIAL_WAKE=y
+CONFIG_OMAP_DSP=m
+# CONFIG_OMAP_DSP_MBCMD_VERBOSE is not set
+# CONFIG_OMAP_DSP_TASK_MULTIOPEN is not set
+# CONFIG_OMAP_DSP_FBEXPORT is not set
+
+#
+# OMAP Core Type
+#
+# CONFIG_ARCH_OMAP730 is not set
+CONFIG_ARCH_OMAP15XX=y
+# CONFIG_ARCH_OMAP16XX is not set
+
+#
+# OMAP Board Type
+#
+# CONFIG_MACH_OMAP_INNOVATOR is not set
+# CONFIG_MACH_VOICEBLUE is not set
+# CONFIG_MACH_OMAP_PALMTE is not set
+# CONFIG_MACH_OMAP_PALMZ71 is not set
+# CONFIG_MACH_OMAP_PALMTT is not set
+# CONFIG_MACH_SX1 is not set
+CONFIG_MACH_AMS_DELTA=y
+# CONFIG_MACH_OMAP_GENERIC is not set
+
+#
+# OMAP CPU Speed
+#
+# CONFIG_OMAP_CLOCKS_SET_BY_BOOTLOADER is not set
+# CONFIG_OMAP_ARM_168MHZ is not set
+CONFIG_OMAP_ARM_150MHZ=y
+# CONFIG_OMAP_ARM_120MHZ is not set
+# CONFIG_OMAP_ARM_60MHZ is not set
+# CONFIG_OMAP_ARM_30MHZ is not set
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_ARM925T=y
+CONFIG_CPU_32v4T=y
+CONFIG_CPU_ABRT_EV4T=y
+CONFIG_CPU_CACHE_V4WT=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_COPY_V4WB=y
+CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+# CONFIG_ARM_THUMB is not set
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+CONFIG_CPU_DCACHE_WRITETHROUGH=y
+# CONFIG_OUTER_CACHE is not set
+
+#
+# Bus support
+#
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+
+#
+# PCCARD (PCMCIA/CardBus) support
+#
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+# CONFIG_TICK_ONESHOT is not set
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_PREEMPT=y
+CONFIG_HZ=100
+# CONFIG_AEABI is not set
+# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+# CONFIG_LEDS is not set
+CONFIG_ALIGNMENT_TRAP=y
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="mem=32M console=ttyS0,115200n8 root=/dev/ram0 initrd=0x11c00000,4M"
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# CPU Frequency scaling
+#
+# CONFIG_CPU_FREQ is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_FPE_NWFPE=y
+# CONFIG_FPE_NWFPE_XP is not set
+# CONFIG_FPE_FASTFPE is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+# CONFIG_ARTHUR is not set
+
+#
+# Power management options
+#
+# CONFIG_PM is not set
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+# CONFIG_IP_PNP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_IP_MROUTE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+CONFIG_INET_TUNNEL=y
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+CONFIG_IPV6=y
+# CONFIG_IPV6_PRIVACY is not set
+# CONFIG_IPV6_ROUTER_PREF is not set
+# CONFIG_IPV6_OPTIMISTIC_DAD is not set
+# CONFIG_INET6_AH is not set
+# CONFIG_INET6_ESP is not set
+# CONFIG_INET6_IPCOMP is not set
+# CONFIG_IPV6_MIP6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
+CONFIG_INET6_XFRM_MODE_TRANSPORT=y
+CONFIG_INET6_XFRM_MODE_TUNNEL=y
+CONFIG_INET6_XFRM_MODE_BEET=y
+# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
+CONFIG_IPV6_SIT=y
+# CONFIG_IPV6_TUNNEL is not set
+# CONFIG_IPV6_MULTIPLE_TABLES is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+
+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+
+#
+# TIPC Configuration (EXPERIMENTAL)
+#
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
+# CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_FW_LOADER is not set
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+
+#
+# Connector - unified userspace <-> kernelspace linker
+#
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+# CONFIG_MTD_CMDLINE_PARTS is not set
+# CONFIG_MTD_AFS_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+# CONFIG_MTD_CFI is not set
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+CONFIG_MTD_NAND=y
+# CONFIG_MTD_NAND_VERIFY_WRITE is not set
+# CONFIG_MTD_NAND_ECC_SMC is not set
+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
+CONFIG_MTD_NAND_AMS_DELTA=y
+CONFIG_MTD_NAND_IDS=y
+# CONFIG_MTD_NAND_DISKONCHIP is not set
+# CONFIG_MTD_NAND_NANDSIM is not set
+# CONFIG_MTD_NAND_PLATFORM is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+
+#
+# Parallel port support
+#
+# CONFIG_PARPORT is not set
+
+#
+# Plug and Play support
+#
+# CONFIG_PNPACPI is not set
+
+#
+# Block devices
+#
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=8192
+CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+# CONFIG_SCSI_MULTI_LUN is not set
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+
+#
+# SCSI low-level drivers
+#
+# CONFIG_ISCSI_TCP is not set
+# CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_ESP_CORE is not set
+# CONFIG_ATA is not set
+
+#
+# Multi-device support (RAID and LVM)
+#
+# CONFIG_MD is not set
+
+#
+# Network device support
+#
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_PHYLIB is not set
+
+#
+# Ethernet (10 or 100Mbit)
+#
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_SMC91X is not set
+# CONFIG_DM9000 is not set
+CONFIG_NETDEV_1000=y
+CONFIG_NETDEV_10000=y
+
+#
+# Token Ring devices
+#
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+
+#
+# USB Network Adapters
+#
+CONFIG_USB_CATC=y
+CONFIG_USB_KAWETH=y
+CONFIG_USB_PEGASUS=y
+CONFIG_USB_RTL8150=y
+CONFIG_USB_USBNET_MII=y
+CONFIG_USB_USBNET=y
+CONFIG_USB_NET_AX8817X=y
+CONFIG_USB_NET_CDCETHER=y
+# CONFIG_USB_NET_DM9601 is not set
+# CONFIG_USB_NET_GL620A is not set
+CONFIG_USB_NET_NET1080=y
+# CONFIG_USB_NET_PLUSB is not set
+# CONFIG_USB_NET_MCS7830 is not set
+# CONFIG_USB_NET_RNDIS_HOST is not set
+CONFIG_USB_NET_CDC_SUBSET=y
+# CONFIG_USB_ALI_M5632 is not set
+# CONFIG_USB_AN2720 is not set
+CONFIG_USB_BELKIN=y
+CONFIG_USB_ARMLINUX=y
+# CONFIG_USB_EPSON2888 is not set
+# CONFIG_USB_KC2190 is not set
+CONFIG_USB_NET_ZAURUS=y
+# CONFIG_WAN is not set
+CONFIG_PPP=y
+CONFIG_PPP_MULTILINK=y
+# CONFIG_PPP_FILTER is not set
+# CONFIG_PPP_ASYNC is not set
+# CONFIG_PPP_SYNC_TTY is not set
+# CONFIG_PPP_DEFLATE is not set
+# CONFIG_PPP_BSDCOMP is not set
+# CONFIG_PPP_MPPE is not set
+# CONFIG_PPPOE is not set
+# CONFIG_SLIP is not set
+CONFIG_SLHC=y
+# CONFIG_SHAPER is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+
+#
+# ISDN subsystem
+#
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+CONFIG_INPUT_MOUSEDEV_PSAUX=y
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_TSDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+CONFIG_KEYBOARD_ATKBD=y
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+CONFIG_KEYBOARD_OMAP=y
+# CONFIG_KEYBOARD_GPIO is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+CONFIG_SERIO_SERPORT=y
+CONFIG_SERIO_LIBPS2=y
+# CONFIG_SERIO_RAW is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_NR_UARTS=4
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
+# CONFIG_SERIAL_8250_EXTENDED is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_LEGACY_PTYS is not set
+
+#
+# IPMI
+#
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_HW_RANDOM=y
+# CONFIG_NVRAM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+
+#
+# TPM devices
+#
+# CONFIG_TCG_TPM is not set
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_CHARDEV=y
+
+#
+# I2C Algorithms
+#
+CONFIG_I2C_ALGOBIT=y
+# CONFIG_I2C_ALGOPCF is not set
+# CONFIG_I2C_ALGOPCA is not set
+
+#
+# I2C Hardware Bus support
+#
+# CONFIG_I2C_GPIO is not set
+# CONFIG_I2C_OCORES is not set
+CONFIG_I2C_OMAP=y
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_STUB is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_SENSORS_DS1337 is not set
+# CONFIG_SENSORS_DS1374 is not set
+# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_TPS65010 is not set
+# CONFIG_SENSORS_TLV320AIC23 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+
+#
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+
+#
+# Dallas's 1-wire bus
+#
+# CONFIG_W1 is not set
+# CONFIG_HWMON is not set
+
+#
+# Misc devices
+#
+# CONFIG_BLINK is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_SM501 is not set
+
+#
+# LED devices
+#
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+
+#
+# LED drivers
+#
+CONFIG_LEDS_AMS_DELTA=y
+# CONFIG_LEDS_OMAP_DEBUG is not set
+# CONFIG_LEDS_OMAP is not set
+
+#
+# LED Triggers
+#
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_TIMER=y
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+
+#
+# Multimedia devices
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+CONFIG_DAB=y
+# CONFIG_USB_DABUSB is not set
+
+#
+# Graphics support
+#
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+# CONFIG_VGASTATE is not set
+CONFIG_FB=y
+CONFIG_FIRMWARE_EDID=y
+# CONFIG_FB_DDC is not set
+# CONFIG_FB_CFB_FILLRECT is not set
+# CONFIG_FB_CFB_COPYAREA is not set
+# CONFIG_FB_CFB_IMAGEBLIT is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_SYS_FOPS is not set
+CONFIG_FB_DEFERRED_IO=y
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_S1D13XXX is not set
+CONFIG_FB_OMAP=y
+# CONFIG_FB_OMAP_LCDC_EXTERNAL is not set
+# CONFIG_FB_OMAP_LCD_MIPID is not set
+# CONFIG_FB_OMAP_BOOTLOADER_INIT is not set
+CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE=2
+# CONFIG_FB_OMAP_DMA_TUNE is not set
+# CONFIG_FB_VIRTUAL is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
+CONFIG_FONTS=y
+# CONFIG_FONT_8x8 is not set
+# CONFIG_FONT_8x16 is not set
+CONFIG_FONT_6x11=y
+# CONFIG_FONT_7x14 is not set
+# CONFIG_FONT_PEARL_8x8 is not set
+# CONFIG_FONT_ACORN_8x8 is not set
+# CONFIG_FONT_MINI_4x6 is not set
+# CONFIG_FONT_CLEAN_4x6 is not set
+# CONFIG_FONT_CLEAN_5x8 is not set
+# CONFIG_FONT_SUN8x16 is not set
+# CONFIG_FONT_SUN12x22 is not set
+# CONFIG_FONT_10x18 is not set
+CONFIG_LOGO=y
+# CONFIG_LOGO_LINUX_MONO is not set
+# CONFIG_LOGO_LINUX_VGA16 is not set
+CONFIG_LOGO_LINUX_CLUT224=y
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+
+#
+# HID Devices
+#
+CONFIG_HID=y
+# CONFIG_HID_DEBUG is not set
+
+#
+# USB Input Devices
+#
+CONFIG_USB_HID=y
+# CONFIG_USB_HIDINPUT_POWERBOOK is not set
+# CONFIG_HID_FF is not set
+# CONFIG_USB_HIDDEV is not set
+
+#
+# USB support
+#
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+
+#
+# Miscellaneous USB options
+#
+CONFIG_USB_DEVICEFS=y
+# CONFIG_USB_DEVICE_CLASS is not set
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_OTG is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_ISP116X_HCD is not set
+CONFIG_USB_OHCI_HCD=y
+# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_MUSB_HDRC is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# may also be needed; see USB_STORAGE Help for more information
+#
+CONFIG_USB_STORAGE=y
+# CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_DPCM is not set
+# CONFIG_USB_STORAGE_USBAT is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+CONFIG_USB_MON=y
+
+#
+# USB port drivers
+#
+
+#
+# USB Serial Converter support
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_AUERSWALD is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_PHIDGET is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_TEST is not set
+
+#
+# USB DSL modem support
+#
+
+#
+# USB Gadget Support
+#
+# CONFIG_USB_GADGET is not set
+# CONFIG_MMC is not set
+
+#
+# Real Time Clock
+#
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+
+#
+# SPI RTC drivers
+#
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+CONFIG_RTC_DRV_OMAP=y
+
+#
+# CBUS support
+#
+# CONFIG_CBUS is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+CONFIG_EXT3_FS_XATTR=y
+# CONFIG_EXT3_FS_POSIX_ACL is not set
+# CONFIG_EXT3_FS_SECURITY is not set
+# CONFIG_EXT4DEV_FS is not set
+CONFIG_JBD=y
+# CONFIG_JBD_DEBUG is not set
+CONFIG_FS_MBCACHE=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+CONFIG_DNOTIFY=y
+CONFIG_AUTOFS_FS=y
+CONFIG_AUTOFS4_FS=y
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_RAMFS=y
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+CONFIG_JFFS2_SUMMARY=y
+# CONFIG_JFFS2_FS_XATTR is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+
+#
+# Network File Systems
+#
+CONFIG_NFS_FS=y
+# CONFIG_NFS_V3 is not set
+# CONFIG_NFS_V4 is not set
+# CONFIG_NFS_DIRECTIO is not set
+# CONFIG_NFSD is not set
+CONFIG_LOCKD=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_SUNRPC_BIND34 is not set
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_BSD_DISKLABEL is not set
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_UNIXWARE_DISKLABEL is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+# CONFIG_SYSV68_PARTITION is not set
+
+#
+# Native Language Support
+#
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+CONFIG_NLS_CODEPAGE_850=y
+CONFIG_NLS_CODEPAGE_852=y
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+CONFIG_NLS_ISO8859_1=y
+CONFIG_NLS_ISO8859_2=y
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+
+#
+# Distributed Lock Manager
+#
+# CONFIG_DLM is not set
+
+#
+# Profiling support
+#
+# CONFIG_PROFILING is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_SLAB is not set
+CONFIG_DEBUG_PREEMPT=y
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_LIST is not set
+CONFIG_FRAME_POINTER=y
+CONFIG_FORCED_INLINING=y
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_DEBUG_USER is not set
+# CONFIG_DEBUG_ERRORS is not set
+# CONFIG_DEBUG_LL is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+
+#
+# Cryptographic options
+#
+# CONFIG_CRYPTO is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/at91cap9adk_defconfig b/arch/arm/configs/at91cap9adk_defconfig
index be2b2f38fd94..bf97801a1068 100644
--- a/arch/arm/configs/at91cap9adk_defconfig
+++ b/arch/arm/configs/at91cap9adk_defconfig
@@ -170,7 +170,7 @@ CONFIG_MACH_AT91CAP9ADK=y
 # AT91 Board Options
 #
 CONFIG_MTD_AT91_DATAFLASH_CARD=y
-# CONFIG_MTD_NAND_AT91_BUSWIDTH_16 is not set
+# CONFIG_MTD_NAND_ATMEL_BUSWIDTH_16 is not set
 
 #
 # AT91 Feature Selections
@@ -442,7 +442,7 @@ CONFIG_MTD_NAND=y
 # CONFIG_MTD_NAND_MUSEUM_IDS is not set
 CONFIG_MTD_NAND_IDS=y
 # CONFIG_MTD_NAND_DISKONCHIP is not set
-CONFIG_MTD_NAND_AT91=y
+CONFIG_MTD_NAND_ATMEL=y
 # CONFIG_MTD_NAND_NANDSIM is not set
 # CONFIG_MTD_NAND_PLATFORM is not set
 # CONFIG_MTD_ALAUDA is not set
diff --git a/arch/arm/configs/at91sam9260ek_defconfig b/arch/arm/configs/at91sam9260ek_defconfig
index 2011adfa6758..38e6a0abeb4e 100644
--- a/arch/arm/configs/at91sam9260ek_defconfig
+++ b/arch/arm/configs/at91sam9260ek_defconfig
@@ -176,7 +176,7 @@ CONFIG_MACH_AT91SAM9260EK=y
 # AT91 Board Options
 #
 # CONFIG_MTD_AT91_DATAFLASH_CARD is not set
-# CONFIG_MTD_NAND_AT91_BUSWIDTH_16 is not set
+# CONFIG_MTD_NAND_ATMEL_BUSWIDTH_16 is not set
 
 #
 # AT91 Feature Selections
diff --git a/arch/arm/configs/at91sam9261ek_defconfig b/arch/arm/configs/at91sam9261ek_defconfig
index 4049768962d2..93b779f94b41 100644
--- a/arch/arm/configs/at91sam9261ek_defconfig
+++ b/arch/arm/configs/at91sam9261ek_defconfig
@@ -169,7 +169,7 @@ CONFIG_MACH_AT91SAM9261EK=y
 # AT91 Board Options
 #
 # CONFIG_MTD_AT91_DATAFLASH_CARD is not set
-# CONFIG_MTD_NAND_AT91_BUSWIDTH_16 is not set
+# CONFIG_MTD_NAND_ATMEL_BUSWIDTH_16 is not set
 
 #
 # AT91 Feature Selections
@@ -433,7 +433,7 @@ CONFIG_MTD_NAND=y
 # CONFIG_MTD_NAND_MUSEUM_IDS is not set
 CONFIG_MTD_NAND_IDS=y
 # CONFIG_MTD_NAND_DISKONCHIP is not set
-CONFIG_MTD_NAND_AT91=y
+CONFIG_MTD_NAND_ATMEL=y
 # CONFIG_MTD_NAND_NANDSIM is not set
 # CONFIG_MTD_NAND_PLATFORM is not set
 # CONFIG_MTD_ALAUDA is not set
diff --git a/arch/arm/configs/at91sam9263ek_defconfig b/arch/arm/configs/at91sam9263ek_defconfig
index fa1c5aecb5a8..a7ddd94363ca 100644
--- a/arch/arm/configs/at91sam9263ek_defconfig
+++ b/arch/arm/configs/at91sam9263ek_defconfig
@@ -169,7 +169,7 @@ CONFIG_MACH_AT91SAM9263EK=y
 # AT91 Board Options
 #
 CONFIG_MTD_AT91_DATAFLASH_CARD=y
-# CONFIG_MTD_NAND_AT91_BUSWIDTH_16 is not set
+# CONFIG_MTD_NAND_ATMEL_BUSWIDTH_16 is not set
 
 #
 # AT91 Feature Selections
@@ -428,7 +428,7 @@ CONFIG_MTD_NAND=y
 # CONFIG_MTD_NAND_MUSEUM_IDS is not set
 CONFIG_MTD_NAND_IDS=y
 # CONFIG_MTD_NAND_DISKONCHIP is not set
-CONFIG_MTD_NAND_AT91=y
+CONFIG_MTD_NAND_ATMEL=y
 # CONFIG_MTD_NAND_NANDSIM is not set
 # CONFIG_MTD_NAND_PLATFORM is not set
 # CONFIG_MTD_ALAUDA is not set
diff --git a/arch/arm/configs/at91sam9g20ek_defconfig b/arch/arm/configs/at91sam9g20ek_defconfig
index c06863847364..df0d6ee672b3 100644
--- a/arch/arm/configs/at91sam9g20ek_defconfig
+++ b/arch/arm/configs/at91sam9g20ek_defconfig
@@ -168,7 +168,7 @@ CONFIG_MACH_AT91SAM9G20EK=y
 # AT91 Board Options
 #
 # CONFIG_MTD_AT91_DATAFLASH_CARD is not set
-# CONFIG_MTD_NAND_AT91_BUSWIDTH_16 is not set
+# CONFIG_MTD_NAND_ATMEL_BUSWIDTH_16 is not set
 
 #
 # AT91 Feature Selections
@@ -442,10 +442,10 @@ CONFIG_MTD_NAND=y
 # CONFIG_MTD_NAND_MUSEUM_IDS is not set
 CONFIG_MTD_NAND_IDS=y
 # CONFIG_MTD_NAND_DISKONCHIP is not set
-CONFIG_MTD_NAND_AT91=y
-CONFIG_MTD_NAND_AT91_ECC_SOFT=y
-# CONFIG_MTD_NAND_AT91_ECC_HW is not set
-# CONFIG_MTD_NAND_AT91_ECC_NONE is not set
+CONFIG_MTD_NAND_ATMEL=y
+CONFIG_MTD_NAND_ATMEL_ECC_SOFT=y
+# CONFIG_MTD_NAND_ATMEL_ECC_HW is not set
+# CONFIG_MTD_NAND_ATMEL_ECC_NONE is not set
 # CONFIG_MTD_NAND_NANDSIM is not set
 # CONFIG_MTD_NAND_PLATFORM is not set
 # CONFIG_MTD_ALAUDA is not set
diff --git a/arch/arm/configs/at91sam9rlek_defconfig b/arch/arm/configs/at91sam9rlek_defconfig
index d8ec5f9ca6ec..1c76642272a1 100644
--- a/arch/arm/configs/at91sam9rlek_defconfig
+++ b/arch/arm/configs/at91sam9rlek_defconfig
@@ -392,7 +392,7 @@ CONFIG_MTD_NAND=y
 # CONFIG_MTD_NAND_MUSEUM_IDS is not set
 CONFIG_MTD_NAND_IDS=y
 # CONFIG_MTD_NAND_DISKONCHIP is not set
-CONFIG_MTD_NAND_AT91=y
+CONFIG_MTD_NAND_ATMEL=y
 # CONFIG_MTD_NAND_NANDSIM is not set
 # CONFIG_MTD_NAND_PLATFORM is not set
 # CONFIG_MTD_ONENAND is not set
diff --git a/arch/arm/configs/cam60_defconfig b/arch/arm/configs/cam60_defconfig
index f3cd4a95373a..f945105d6cd6 100644
--- a/arch/arm/configs/cam60_defconfig
+++ b/arch/arm/configs/cam60_defconfig
@@ -466,10 +466,10 @@ CONFIG_MTD_NAND_VERIFY_WRITE=y
 # CONFIG_MTD_NAND_MUSEUM_IDS is not set
 CONFIG_MTD_NAND_IDS=y
 # CONFIG_MTD_NAND_DISKONCHIP is not set
-CONFIG_MTD_NAND_AT91=y
-# CONFIG_MTD_NAND_AT91_ECC_SOFT is not set
-CONFIG_MTD_NAND_AT91_ECC_HW=y
-# CONFIG_MTD_NAND_AT91_ECC_NONE is not set
+CONFIG_MTD_NAND_ATMEL=y
+# CONFIG_MTD_NAND_ATMEL_ECC_SOFT is not set
+CONFIG_MTD_NAND_ATMEL_ECC_HW=y
+# CONFIG_MTD_NAND_ATMEL_ECC_NONE is not set
 # CONFIG_MTD_NAND_NANDSIM is not set
 # CONFIG_MTD_NAND_PLATFORM is not set
 # CONFIG_MTD_ALAUDA is not set
diff --git a/arch/arm/configs/eseries_pxa_defconfig b/arch/arm/configs/eseries_pxa_defconfig
index 493ecee24f94..2307587a38a9 100644
--- a/arch/arm/configs/eseries_pxa_defconfig
+++ b/arch/arm/configs/eseries_pxa_defconfig
@@ -1,15 +1,19 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.21-hh17
-# Fri Nov  9 20:23:03 2007
+# Linux kernel version: 2.6.26
+# Sat Jul 26 22:28:46 2008
 #
 CONFIG_ARM=y
 CONFIG_SYS_SUPPORTS_APM_EMULATION=y
 CONFIG_GENERIC_GPIO=y
 CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_MMU=y
 # CONFIG_NO_IOPORT is not set
 CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 CONFIG_HARDIRQS_SW_RESEND=y
 CONFIG_GENERIC_IRQ_PROBE=y
@@ -18,75 +22,90 @@ CONFIG_RWSEM_GENERIC_SPINLOCK=y
 # CONFIG_ARCH_HAS_ILOG2_U64 is not set
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_ARCH_SUPPORTS_AOUT=y
 CONFIG_ZONE_DMA=y
 CONFIG_ARCH_MTD_XIP=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 CONFIG_VECTORS_BASE=0xffff0000
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
-# Code maturity level options
+# General setup
 #
 CONFIG_EXPERIMENTAL=y
 CONFIG_BROKEN_ON_SMP=y
 CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
 CONFIG_LOCALVERSION=""
 CONFIG_LOCALVERSION_AUTO=y
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-# CONFIG_IPC_NS is not set
 CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_POSIX_MQUEUE is not set
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
-# CONFIG_UTS_NS is not set
 # CONFIG_AUDIT is not set
 # CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+# CONFIG_GROUP_SCHED is not set
 CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_RELAY is not set
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_NAMESPACES is not set
+# CONFIG_BLK_DEV_INITRD is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
 CONFIG_UID16=y
 CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
 # CONFIG_KALLSYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
-CONFIG_SLAB=y
 CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
+# CONFIG_HAVE_IOREMAP_PROT is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+# CONFIG_HAVE_ARCH_TRACEHOOK is not set
+# CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+CONFIG_HAVE_CLK=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
-# CONFIG_SLOB is not set
-
-#
-# Loadable module support
-#
 CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
 CONFIG_MODULE_FORCE_UNLOAD=y
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_KMOD=y
-
-#
-# Block layer
-#
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -100,6 +119,7 @@ CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_CFQ is not set
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_CLASSIC_RCU=y
 
 #
 # System Type
@@ -111,21 +131,26 @@ CONFIG_DEFAULT_IOSCHED="anticipatory"
 # CONFIG_ARCH_AT91 is not set
 # CONFIG_ARCH_CLPS7500 is not set
 # CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
 # CONFIG_ARCH_EBSA110 is not set
 # CONFIG_ARCH_EP93XX is not set
 # CONFIG_ARCH_FOOTBRIDGE is not set
 # CONFIG_ARCH_NETX is not set
 # CONFIG_ARCH_H720X is not set
 # CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_IOP13XX is not set
 # CONFIG_ARCH_IOP32X is not set
 # CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_IXP2000 is not set
 # CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
 # CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_KS8695 is not set
 # CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_ORION5X is not set
 # CONFIG_ARCH_PNX4008 is not set
 CONFIG_ARCH_PXA=y
 # CONFIG_ARCH_RPC is not set
@@ -133,80 +158,48 @@ CONFIG_ARCH_PXA=y
 # CONFIG_ARCH_S3C2410 is not set
 # CONFIG_ARCH_SHARK is not set
 # CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_DAVINCI is not set
 # CONFIG_ARCH_OMAP is not set
-# CONFIG_BOARD_IRQ_MAP_SMALL is not set
-CONFIG_BOARD_IRQ_MAP_BIG=y
-CONFIG_DMABOUNCE=y
+# CONFIG_ARCH_MSM7X00A is not set
 
 #
-# Intel PXA2xx Implementations
+# Intel PXA2xx/PXA3xx Implementations
 #
+# CONFIG_ARCH_GUMSTIX is not set
 # CONFIG_ARCH_LUBBOCK is not set
 # CONFIG_MACH_LOGICPD_PXA270 is not set
 # CONFIG_MACH_MAINSTONE is not set
 # CONFIG_ARCH_PXA_IDP is not set
-CONFIG_TOSHIBA_TMIO_OHCI=y
-CONFIG_ARCH_ESERIES=y
+# CONFIG_PXA_SHARPSL is not set
+CONFIG_ARCH_PXA_ESERIES=y
 CONFIG_MACH_E330=y
+CONFIG_MACH_E350=y
 CONFIG_MACH_E740=y
 CONFIG_MACH_E750=y
 CONFIG_MACH_E400=y
 CONFIG_MACH_E800=y
-CONFIG_E330_LCD=y
-CONFIG_E740_LCD=y
-CONFIG_E750_LCD=y
-CONFIG_E400_LCD=y
-CONFIG_E800_LCD=y
-CONFIG_ESERIES_UDC=y
-CONFIG_E330_TC6387XB=y
-CONFIG_E740_T7L66XB=y
-CONFIG_E400_T7L66XB=y
-CONFIG_E750_E800_TC6393XB=y
-CONFIG_E740_PCMCIA=m
-CONFIG_E750_PCMCIA=m
-CONFIG_E800_PCMCIA=m
-# CONFIG_MACH_A620 is not set
-# CONFIG_MACH_A716 is not set
-# CONFIG_MACH_A730 is not set
-# CONFIG_ARCH_H1900 is not set
-# CONFIG_ARCH_H2200 is not set
-# CONFIG_MACH_H3900 is not set
-# CONFIG_MACH_H4000 is not set
-# CONFIG_MACH_H4700 is not set
-# CONFIG_MACH_HX2750 is not set
-# CONFIG_ARCH_H5400 is not set
-# CONFIG_MACH_HIMALAYA is not set
-# CONFIG_MACH_HTCUNIVERSAL is not set
-# CONFIG_MACH_HTCALPINE is not set
-# CONFIG_MACH_MAGICIAN is not set
-# CONFIG_MACH_HTCAPACHE is not set
-# CONFIG_MACH_BLUEANGEL is not set
-
-#
-# HTC_HW6X00
-#
-# CONFIG_MACH_HTCBEETLES is not set
-# CONFIG_MACH_HW6900 is not set
-# CONFIG_MACH_HTCATHENA is not set
-# CONFIG_ARCH_AXIMX3 is not set
-# CONFIG_ARCH_AXIMX5 is not set
-# CONFIG_MACH_X50 is not set
-# CONFIG_ARCH_ROVERP1 is not set
-# CONFIG_ARCH_ROVERP5P is not set
-# CONFIG_MACH_XSCALE_PALMLD is not set
-# CONFIG_MACH_T3XSCALE is not set
-# CONFIG_MACH_RECON is not set
-# CONFIG_MACH_GHI270HG is not set
-# CONFIG_MACH_GHI270 is not set
-# CONFIG_MACH_LOOXC550 is not set
-# CONFIG_PXA_SHARPSL is not set
 # CONFIG_MACH_TRIZEPS4 is not set
+# CONFIG_MACH_EM_X270 is not set
+# CONFIG_MACH_COLIBRI is not set
+# CONFIG_MACH_ZYLONITE is not set
+# CONFIG_MACH_LITTLETON is not set
+# CONFIG_MACH_TAVOREVB is not set
+# CONFIG_MACH_SAAR is not set
+# CONFIG_MACH_ARMCORE is not set
+# CONFIG_MACH_MAGICIAN is not set
+# CONFIG_MACH_PCM027 is not set
+# CONFIG_ARCH_PXA_PALM is not set
+# CONFIG_PXA_EZX is not set
 CONFIG_PXA25x=y
+# CONFIG_PXA_PWM is not set
+
+#
+# Boot options
+#
 
 #
-# Linux As Bootloader
+# Power management
 #
-# CONFIG_LAB is not set
 
 #
 # Processor Type
@@ -215,6 +208,7 @@ CONFIG_CPU_32=y
 CONFIG_CPU_XSCALE=y
 CONFIG_CPU_32v5=y
 CONFIG_CPU_ABRT_EV5T=y
+CONFIG_CPU_PABRT_NOIFAR=y
 CONFIG_CPU_CACHE_VIVT=y
 CONFIG_CPU_TLB_V4WBI=y
 CONFIG_CPU_CP15=y
@@ -232,11 +226,9 @@ CONFIG_XSCALE_PMU=y
 #
 # Bus support
 #
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-CONFIG_PCCARD=m
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+CONFIG_PCCARD=y
 # CONFIG_PCMCIA_DEBUG is not set
 CONFIG_PCMCIA=m
 CONFIG_PCMCIA_LOAD_CIS=y
@@ -245,11 +237,14 @@ CONFIG_PCMCIA_IOCTL=y
 #
 # PC-card bridges
 #
-CONFIG_PCMCIA_PXA2XX=m
 
 #
 # Kernel Features
 #
+CONFIG_TICK_ONESHOT=y
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
 # CONFIG_PREEMPT is not set
 CONFIG_HZ=100
 CONFIG_AEABI=y
@@ -262,9 +257,13 @@ CONFIG_FLATMEM_MANUAL=y
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4096
 # CONFIG_RESOURCES_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
 CONFIG_ALIGNMENT_TRAP=y
 
 #
@@ -275,7 +274,7 @@ CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE=""
 # CONFIG_XIP_KERNEL is not set
 CONFIG_KEXEC=y
-# CONFIG_TXTOFFSET_DELTA is not set
+CONFIG_ATAGS_PROC=y
 
 #
 # CPU Frequency scaling
@@ -304,11 +303,12 @@ CONFIG_BINFMT_MISC=y
 # Power management options
 #
 CONFIG_PM=y
-CONFIG_PM_LEGACY=y
 # CONFIG_PM_DEBUG is not set
-# CONFIG_DPM_DEBUG is not set
-# CONFIG_PM_SYSFS_DEPRECATED is not set
+CONFIG_PM_SLEEP=y
+CONFIG_SUSPEND=y
+CONFIG_SUSPEND_FREEZER=y
 # CONFIG_APM_EMULATION is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
 
 #
 # Networking
@@ -318,13 +318,13 @@ CONFIG_NET=y
 #
 # Networking options
 #
-# CONFIG_NETDEBUG is not set
 # CONFIG_PACKET is not set
 CONFIG_UNIX=y
 CONFIG_XFRM=y
 # CONFIG_XFRM_USER is not set
 # CONFIG_XFRM_SUB_POLICY is not set
 # CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
 # CONFIG_NET_KEY is not set
 CONFIG_INET=y
 # CONFIG_IP_MULTICAST is not set
@@ -339,35 +339,40 @@ CONFIG_IP_FIB_HASH=y
 # CONFIG_INET_ESP is not set
 # CONFIG_INET_IPCOMP is not set
 # CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_TUNNEL=y
 CONFIG_INET_XFRM_MODE_TRANSPORT=y
 CONFIG_INET_XFRM_MODE_TUNNEL=y
 CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
 CONFIG_INET_DIAG=y
 CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
 CONFIG_TCP_CONG_CUBIC=y
 CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_TCP_MD5SIG is not set
-# CONFIG_IPV6 is not set
+CONFIG_IPV6=y
+# CONFIG_IPV6_PRIVACY is not set
+# CONFIG_IPV6_ROUTER_PREF is not set
+# CONFIG_IPV6_OPTIMISTIC_DAD is not set
+# CONFIG_INET6_AH is not set
+# CONFIG_INET6_ESP is not set
+# CONFIG_INET6_IPCOMP is not set
+# CONFIG_IPV6_MIP6 is not set
 # CONFIG_INET6_XFRM_TUNNEL is not set
 # CONFIG_INET6_TUNNEL is not set
+CONFIG_INET6_XFRM_MODE_TRANSPORT=y
+CONFIG_INET6_XFRM_MODE_TUNNEL=y
+CONFIG_INET6_XFRM_MODE_BEET=y
+# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
+CONFIG_IPV6_SIT=y
+CONFIG_IPV6_NDISC_NODETYPE=y
+# CONFIG_IPV6_TUNNEL is not set
+# CONFIG_IPV6_MULTIPLE_TABLES is not set
+# CONFIG_IPV6_MROUTE is not set
 # CONFIG_NETWORK_SECMARK is not set
 # CONFIG_NETFILTER is not set
-
-#
-# DCCP Configuration (EXPERIMENTAL)
-#
 # CONFIG_IP_DCCP is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
 # CONFIG_IP_SCTP is not set
-
-#
-# TIPC Configuration (EXPERIMENTAL)
-#
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
@@ -380,10 +385,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
 # CONFIG_NET_SCHED is not set
 
 #
@@ -391,15 +392,74 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 #
 # CONFIG_NET_PKTGEN is not set
 # CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
+# CONFIG_CAN is not set
+CONFIG_IRDA=y
+
+#
+# IrDA protocols
+#
+CONFIG_IRLAN=m
+CONFIG_IRCOMM=m
+CONFIG_IRDA_ULTRA=y
+
+#
+# IrDA options
+#
+CONFIG_IRDA_CACHE_LAST_LSAP=y
+CONFIG_IRDA_FAST_RR=y
+# CONFIG_IRDA_DEBUG is not set
+
+#
+# Infrared-port device drivers
+#
+
+#
+# SIR device drivers
+#
+# CONFIG_IRTTY_SIR is not set
+
+#
+# Dongle support
+#
+# CONFIG_KINGSUN_DONGLE is not set
+# CONFIG_KSDAZZLE_DONGLE is not set
+# CONFIG_KS959_DONGLE is not set
+
+#
+# FIR device drivers
+#
+# CONFIG_USB_IRDA is not set
+# CONFIG_SIGMATEL_FIR is not set
+CONFIG_PXA_FICP=y
+# CONFIG_MCS_FIR is not set
 # CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+CONFIG_CFG80211=m
+CONFIG_NL80211=y
+CONFIG_WIRELESS_EXT=y
+CONFIG_WIRELESS_EXT_SYSFS=y
+CONFIG_MAC80211=m
+
+#
+# Rate control algorithm selection
+#
+CONFIG_MAC80211_RC_PID=y
+CONFIG_MAC80211_RC_DEFAULT_PID=y
+CONFIG_MAC80211_RC_DEFAULT="pid"
+# CONFIG_MAC80211_MESH is not set
+# CONFIG_MAC80211_LEDS is not set
+# CONFIG_MAC80211_DEBUG_MENU is not set
 CONFIG_IEEE80211=m
 # CONFIG_IEEE80211_DEBUG is not set
 CONFIG_IEEE80211_CRYPT_WEP=m
-# CONFIG_IEEE80211_CRYPT_CCMP is not set
-# CONFIG_IEEE80211_CRYPT_TKIP is not set
-# CONFIG_IEEE80211_SOFTMAC is not set
-CONFIG_WIRELESS_EXT=y
+CONFIG_IEEE80211_CRYPT_CCMP=m
+CONFIG_IEEE80211_CRYPT_TKIP=m
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
 
 #
 # Device Drivers
@@ -408,38 +468,32 @@ CONFIG_WIRELESS_EXT=y
 #
 # Generic Driver Options
 #
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 # CONFIG_STANDALONE is not set
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_SYS_HYPERVISOR is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
 # CONFIG_CONNECTOR is not set
-
-#
-# Memory Technology Devices (MTD)
-#
 CONFIG_MTD=m
 # CONFIG_MTD_DEBUG is not set
 # CONFIG_MTD_CONCAT is not set
-CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
-# CONFIG_MTD_AFS_PARTS is not set
+# CONFIG_MTD_PARTITIONS is not set
 
 #
 # User Modules And Translation Layers
 #
-CONFIG_MTD_CHAR=m
-CONFIG_MTD_BLKDEVS=m
-CONFIG_MTD_BLOCK=m
+# CONFIG_MTD_CHAR is not set
+# CONFIG_MTD_BLKDEVS is not set
+# CONFIG_MTD_BLOCK is not set
 # CONFIG_MTD_BLOCK_RO is not set
 # CONFIG_FTL is not set
 # CONFIG_NFTL is not set
 # CONFIG_INFTL is not set
 # CONFIG_RFD_FTL is not set
 # CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
 
 #
 # RAM/ROM/Flash chip drivers
@@ -459,7 +513,6 @@ CONFIG_MTD_CFI_I2=y
 # CONFIG_MTD_RAM is not set
 # CONFIG_MTD_ROM is not set
 # CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_OBSOLETE_CHIPS is not set
 
 #
 # Mapping drivers for chip access
@@ -482,82 +535,43 @@ CONFIG_MTD_CFI_I2=y
 # CONFIG_MTD_DOC2000 is not set
 # CONFIG_MTD_DOC2001 is not set
 # CONFIG_MTD_DOC2001PLUS is not set
-
-#
-# NAND Flash Device Drivers
-#
 CONFIG_MTD_NAND=m
-CONFIG_MTD_NAND_VERIFY_WRITE=y
+# CONFIG_MTD_NAND_VERIFY_WRITE is not set
 # CONFIG_MTD_NAND_ECC_SMC is not set
-# CONFIG_MTD_NAND_H1900 is not set
+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
 CONFIG_MTD_NAND_IDS=m
 # CONFIG_MTD_NAND_DISKONCHIP is not set
 # CONFIG_MTD_NAND_SHARPSL is not set
-# CONFIG_MTD_NAND_NANDSIM is not set
-
-#
-# OneNAND Flash Device Drivers
-#
+# CONFIG_MTD_NAND_PLATFORM is not set
+# CONFIG_MTD_ALAUDA is not set
 # CONFIG_MTD_ONENAND is not set
 
 #
-# Parallel port support
+# UBI - Unsorted block images
 #
+# CONFIG_MTD_UBI is not set
 # CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-# CONFIG_PNPACPI is not set
-
-#
-# Block devices
-#
+CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=m
 # CONFIG_BLK_DEV_CRYPTOLOOP is not set
 # CONFIG_BLK_DEV_NBD is not set
 # CONFIG_BLK_DEV_UB is not set
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=6144
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_BLK_DEV_RAM is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-CONFIG_IDE=m
-CONFIG_IDE_MAX_HWIFS=4
-CONFIG_BLK_DEV_IDE=m
-
-#
-# Please see Documentation/ide.txt for help/info on IDE drives
-#
-# CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_BLK_DEV_IDEDISK=m
-# CONFIG_IDEDISK_MULTI_MODE is not set
-# CONFIG_BLK_DEV_IDECS is not set
-# CONFIG_BLK_DEV_IDECD is not set
-# CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_BLK_DEV_IDEFLOPPY is not set
-# CONFIG_BLK_DEV_IDESCSI is not set
-# CONFIG_IDE_TASK_IOCTL is not set
-
-#
-# IDE chipset support/bugfixes
-#
-# CONFIG_IDE_GENERIC is not set
-# CONFIG_IDE_ARM is not set
-# CONFIG_BLK_DEV_IDEDMA is not set
-# CONFIG_BLK_DEV_HD is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
 
 #
 # SCSI device support
 #
 # CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=m
+CONFIG_SCSI_DMA=y
 # CONFIG_SCSI_TGT is not set
 # CONFIG_SCSI_NETLINK is not set
 # CONFIG_SCSI_PROC_FS is not set
@@ -565,7 +579,7 @@ CONFIG_SCSI=m
 #
 # SCSI support type (disk, tape, CD-ROM)
 #
-# CONFIG_BLK_DEV_SD is not set
+CONFIG_BLK_DEV_SD=m
 # CONFIG_CHR_DEV_ST is not set
 # CONFIG_CHR_DEV_OSST is not set
 # CONFIG_BLK_DEV_SR is not set
@@ -579,6 +593,7 @@ CONFIG_SCSI=m
 # CONFIG_SCSI_CONSTANTS is not set
 # CONFIG_SCSI_LOGGING is not set
 # CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
 
 #
 # SCSI Transports
@@ -586,132 +601,78 @@ CONFIG_SCSI=m
 # CONFIG_SCSI_SPI_ATTRS is not set
 # CONFIG_SCSI_FC_ATTRS is not set
 # CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_ATTRS is not set
 # CONFIG_SCSI_SAS_LIBSAS is not set
-
-#
-# SCSI low-level drivers
-#
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_SCSI_DEBUG is not set
-
-#
-# PCMCIA SCSI adapter support
-#
-# CONFIG_PCMCIA_AHA152X is not set
-# CONFIG_PCMCIA_FDOMAIN is not set
-# CONFIG_PCMCIA_NINJA_SCSI is not set
-# CONFIG_PCMCIA_QLOGIC is not set
-# CONFIG_PCMCIA_SYM53C500 is not set
-
-#
-# Serial ATA (prod) and Parallel ATA (experimental) drivers
-#
-# CONFIG_ATA is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
+# CONFIG_SCSI_SRP_ATTRS is not set
+# CONFIG_SCSI_LOWLEVEL is not set
+# CONFIG_SCSI_LOWLEVEL_PCMCIA is not set
+# CONFIG_SCSI_DH is not set
+CONFIG_ATA=m
+# CONFIG_ATA_NONSTANDARD is not set
+# CONFIG_SATA_PMP is not set
+CONFIG_ATA_SFF=y
+# CONFIG_SATA_MV is not set
+CONFIG_PATA_PCMCIA=m
+# CONFIG_PATA_PLATFORM is not set
 # CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
-#
-# Network device support
-#
 CONFIG_NETDEVICES=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
 # CONFIG_EQUALIZER is not set
 # CONFIG_TUN is not set
-
-#
-# PHY device support
-#
-
-#
-# Ethernet (10 or 100Mbit)
-#
+# CONFIG_VETH is not set
 # CONFIG_NET_ETHERNET is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
 
 #
-# Ethernet (1000 Mbit)
-#
-
-#
-# Ethernet (10000 Mbit)
-#
-
-#
-# Token Ring devices
-#
-
-#
-# Wireless LAN (non-hamradio)
-#
-CONFIG_NET_RADIO=y
-# CONFIG_NET_WIRELESS_RTNETLINK is not set
-
-#
-# Obsolete Wireless cards support (pre-802.11)
-#
-# CONFIG_STRIP is not set
-# CONFIG_PCMCIA_WAVELAN is not set
-# CONFIG_PCMCIA_NETWAVE is not set
-
-#
-# Wireless 802.11 Frequency Hopping cards support
+# Wireless LAN
 #
+# CONFIG_WLAN_PRE80211 is not set
+CONFIG_WLAN_80211=y
 # CONFIG_PCMCIA_RAYCS is not set
-
-#
-# Wireless 802.11b ISA/PCI cards support
-#
-# CONFIG_HERMES is not set
+# CONFIG_LIBERTAS is not set
+CONFIG_HERMES=m
+CONFIG_PCMCIA_HERMES=m
+# CONFIG_PCMCIA_SPECTRUM is not set
 # CONFIG_ATMEL is not set
-
-#
-# Wireless 802.11b Pcmcia/Cardbus cards support
-#
 # CONFIG_AIRO_CS is not set
 # CONFIG_PCMCIA_WL3501 is not set
 # CONFIG_USB_ZD1201 is not set
-CONFIG_HOSTAP=m
-# CONFIG_HOSTAP_FIRMWARE is not set
-# CONFIG_HOSTAP_CS is not set
-# CONFIG_ACX is not set
-CONFIG_NET_WIRELESS=y
-
-#
-# PCMCIA network device support
-#
-# CONFIG_NET_PCMCIA is not set
+# CONFIG_USB_NET_RNDIS_WLAN is not set
+# CONFIG_RTL8187 is not set
+# CONFIG_MAC80211_HWSIM is not set
+# CONFIG_P54_COMMON is not set
+# CONFIG_IWLWIFI_LEDS is not set
+# CONFIG_HOSTAP is not set
+# CONFIG_B43 is not set
+# CONFIG_B43LEGACY is not set
+# CONFIG_ZD1211RW is not set
+# CONFIG_RT2X00 is not set
 
 #
-# Wan interfaces
+# USB Network Adapters
 #
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
+CONFIG_NET_PCMCIA=y
+# CONFIG_PCMCIA_3C589 is not set
+# CONFIG_PCMCIA_3C574 is not set
+# CONFIG_PCMCIA_FMVJ18X is not set
+CONFIG_PCMCIA_PCNET=m
+# CONFIG_PCMCIA_NMCLAN is not set
+# CONFIG_PCMCIA_SMC91C92 is not set
+# CONFIG_PCMCIA_XIRC2PS is not set
+# CONFIG_PCMCIA_AXNET is not set
 # CONFIG_WAN is not set
 # CONFIG_PPP is not set
 # CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
 # CONFIG_NETCONSOLE is not set
 # CONFIG_NETPOLL is not set
 # CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
 # CONFIG_ISDN is not set
 
 #
@@ -719,38 +680,48 @@ CONFIG_NET_WIRELESS=y
 #
 CONFIG_INPUT=y
 # CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
 
 #
 # Userland interfaces
 #
 # CONFIG_INPUT_MOUSEDEV is not set
 # CONFIG_INPUT_JOYDEV is not set
-CONFIG_INPUT_TSDEV=m
-CONFIG_INPUT_TSDEV_SCREEN_X=240
-CONFIG_INPUT_TSDEV_SCREEN_Y=320
 CONFIG_INPUT_EVDEV=m
 # CONFIG_INPUT_EVBUG is not set
-# CONFIG_INPUT_LED_TRIGGER is not set
 
 #
 # Input Device Drivers
 #
-# CONFIG_INPUT_KEYBOARD is not set
+CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ATKBD is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+CONFIG_KEYBOARD_GPIO=m
 # CONFIG_INPUT_MOUSE is not set
 # CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
 CONFIG_INPUT_TOUCHSCREEN=y
+# CONFIG_TOUCHSCREEN_FUJITSU is not set
 # CONFIG_TOUCHSCREEN_GUNZE is not set
 # CONFIG_TOUCHSCREEN_ELO is not set
 # CONFIG_TOUCHSCREEN_MTOUCH is not set
+# CONFIG_TOUCHSCREEN_INEXIO is not set
 # CONFIG_TOUCHSCREEN_MK712 is not set
-CONFIG_TOUCHSCREEN_WM97XX=m
-CONFIG_TOUCHSCREEN_WM9705=y
-CONFIG_TOUCHSCREEN_WM9712=y
-CONFIG_TOUCHSCREEN_WM9713=y
 # CONFIG_TOUCHSCREEN_PENMOUNT is not set
 # CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
 # CONFIG_TOUCHSCREEN_TOUCHWIN is not set
 # CONFIG_TOUCHSCREEN_UCB1400 is not set
+CONFIG_TOUCHSCREEN_WM97XX=m
+CONFIG_TOUCHSCREEN_WM9705=y
+CONFIG_TOUCHSCREEN_WM9712=y
+CONFIG_TOUCHSCREEN_WM9713=y
+# CONFIG_TOUCHSCREEN_WM97XX_MAINSTONE is not set
+# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
+# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
 # CONFIG_INPUT_MISC is not set
 
 #
@@ -763,9 +734,11 @@ CONFIG_TOUCHSCREEN_WM9713=y
 # Character devices
 #
 CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
 # CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
 # CONFIG_SERIAL_NONSTANDARD is not set
 
 #
@@ -777,25 +750,12 @@ CONFIG_HW_CONSOLE=y
 # Non-8250 serial port support
 #
 # CONFIG_SERIAL_PXA is not set
-# CONFIG_RS232_SERIAL is not set
 CONFIG_UNIX98_PTYS=y
 # CONFIG_LEGACY_PTYS is not set
-
-#
-# IPMI
-#
 # CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
 CONFIG_HW_RANDOM=m
 # CONFIG_NVRAM is not set
-# CONFIG_SA1100_RTC is not set
-# CONFIG_DTLK is not set
 # CONFIG_R3964 is not set
-# CONFIG_TIHTC is not set
 
 #
 # PCMCIA character devices
@@ -803,117 +763,79 @@ CONFIG_HW_RANDOM=m
 # CONFIG_SYNCLINK_CS is not set
 # CONFIG_CARDMAN_4000 is not set
 # CONFIG_CARDMAN_4040 is not set
+# CONFIG_IPWIRELESS is not set
 # CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
 # CONFIG_TCG_TPM is not set
-
-#
-# I2C support
-#
 # CONFIG_I2C is not set
-
-#
-# SPI support
-#
 # CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
-
-#
-# Dallas's 1-wire bus
-#
-# CONFIG_W1 is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_GPIO_SYSFS is not set
 
 #
-# Hardware Monitoring support
-#
-# CONFIG_HWMON is not set
-# CONFIG_HWMON_VID is not set
-# CONFIG_POWER_SUPPLY is not set
-
-#
-# L3 serial bus support
-#
-# CONFIG_L3 is not set
-
-#
-# Misc devices
+# I2C GPIO expanders:
 #
 
 #
-# Multimedia Capabilities Port drivers
+# PCI GPIO expanders:
 #
-# CONFIG_ADC is not set
 
 #
-# Compaq/iPAQ Drivers
+# SPI GPIO expanders:
 #
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_WATCHDOG is not set
 
 #
-# Compaq/HP iPAQ Drivers
+# Sonics Silicon Backplane
 #
-# CONFIG_IPAQ_SLEEVE is not set
-# CONFIG_SLEEVE_DEBUG is not set
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
 
 #
 # Multifunction device drivers
 #
+CONFIG_MFD_CORE=y
 # CONFIG_MFD_SM501 is not set
-# CONFIG_HTC_ASIC2 is not set
-# CONFIG_HTC_ASIC3 is not set
-# CONFIG_HTC_PASIC3 is not set
 # CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_BBKEYS is not set
-# CONFIG_HTC_ASIC3_DS1WM is not set
-# CONFIG_SOC_SAMCOP is not set
-# CONFIG_SOC_HAMCOP is not set
-# CONFIG_SOC_MQ11XX is not set
-CONFIG_SOC_T7L66XB=y
-# CONFIG_SOC_TC6387XB is not set
-CONFIG_SOC_TC6393XB=y
-# CONFIG_SOC_TSC2101 is not set
-# CONFIG_SOC_TSC2200 is not set
-
-#
-# LED devices
-#
-# CONFIG_NEW_LEDS is not set
-
-#
-# LED drivers
-#
+# CONFIG_HTC_PASIC3 is not set
+CONFIG_MFD_TC6393XB=y
 
 #
-# LED Triggers
+# Multimedia devices
 #
-# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
 
 #
-# Multimedia devices
+# Multimedia core support
 #
 # CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
 
 #
-# Digital Video Broadcasting Devices
+# Multimedia drivers
 #
-# CONFIG_DVB is not set
-# CONFIG_USB_DABUSB is not set
+# CONFIG_DAB is not set
 
 #
 # Graphics support
 #
-CONFIG_BACKLIGHT_LCD_SUPPORT=y
-CONFIG_BACKLIGHT_CLASS_DEVICE=y
-CONFIG_LCD_CLASS_DEVICE=y
-CONFIG_BACKLIGHT_CORGI=y
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
 CONFIG_FB=y
 # CONFIG_FIRMWARE_EDID is not set
 # CONFIG_FB_DDC is not set
 CONFIG_FB_CFB_FILLRECT=y
 CONFIG_FB_CFB_COPYAREA=y
 CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
+# CONFIG_FB_SYS_FOPS is not set
 # CONFIG_FB_SVGALIB is not set
 # CONFIG_FB_MACMODES is not set
 # CONFIG_FB_BACKLIGHT is not set
@@ -923,14 +845,25 @@ CONFIG_FB_CFB_IMAGEBLIT=y
 #
 # Frame buffer hardware drivers
 #
-# CONFIG_FB_IMAGEON is not set
 # CONFIG_FB_S1D13XXX is not set
 CONFIG_FB_PXA=y
+# CONFIG_FB_PXA_SMARTPANEL is not set
 # CONFIG_FB_PXA_PARAMETERS is not set
 # CONFIG_FB_MBX is not set
 CONFIG_FB_W100=y
+# CONFIG_FB_AM200EPD is not set
 # CONFIG_FB_VIRTUAL is not set
-# CONFIG_FB_VSFB is not set
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+CONFIG_LCD_CLASS_DEVICE=y
+# CONFIG_LCD_ILI9320 is not set
+# CONFIG_LCD_PLATFORM is not set
+CONFIG_BACKLIGHT_CLASS_DEVICE=y
+CONFIG_BACKLIGHT_CORGI=y
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
 
 #
 # Console display driver support
@@ -938,6 +871,7 @@ CONFIG_FB_W100=y
 # CONFIG_VGA_CONSOLE is not set
 CONFIG_DUMMY_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
 # CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
 CONFIG_FONTS=y
 # CONFIG_FONT_8x8 is not set
@@ -945,28 +879,13 @@ CONFIG_FONTS=y
 # CONFIG_FONT_6x11 is not set
 # CONFIG_FONT_7x14 is not set
 # CONFIG_FONT_PEARL_8x8 is not set
-CONFIG_FONT_ACORN_8x8=y
-# CONFIG_FONT_MINI_4x6 is not set
+# CONFIG_FONT_ACORN_8x8 is not set
+CONFIG_FONT_MINI_4x6=y
 # CONFIG_FONT_SUN8x16 is not set
 # CONFIG_FONT_SUN12x22 is not set
 # CONFIG_FONT_10x18 is not set
-
-#
-# Logo configuration
-#
-CONFIG_LOGO=y
-# CONFIG_LOGO_LINUX_MONO is not set
-# CONFIG_LOGO_LINUX_VGA16 is not set
-CONFIG_LOGO_LINUX_CLUT224=y
-
-#
-# Sound
-#
+# CONFIG_LOGO is not set
 CONFIG_SOUND=y
-
-#
-# Advanced Linux Sound Architecture
-#
 CONFIG_SND=m
 CONFIG_SND_TIMER=m
 CONFIG_SND_PCM=m
@@ -980,125 +899,75 @@ CONFIG_SND_SUPPORT_OLD_API=y
 CONFIG_SND_VERBOSE_PROCFS=y
 CONFIG_SND_VERBOSE_PRINTK=y
 # CONFIG_SND_DEBUG is not set
-
-#
-# Generic devices
-#
+CONFIG_SND_DRIVERS=y
 # CONFIG_SND_DUMMY is not set
 # CONFIG_SND_MTPAV is not set
 # CONFIG_SND_SERIAL_U16550 is not set
 # CONFIG_SND_MPU401 is not set
-
-#
-# ALSA ARM devices
-#
+CONFIG_SND_ARM=y
 # CONFIG_SND_PXA2XX_AC97 is not set
-# CONFIG_SND_RECON is not set
-
-#
-# USB devices
-#
-# CONFIG_SND_USB_AUDIO is not set
-
-#
-# PCMCIA devices
-#
-# CONFIG_SND_VXPOCKET is not set
-# CONFIG_SND_PDAUDIOCF is not set
-
-#
-# SoC audio support
-#
-CONFIG_SND_SOC_AC97_BUS=y
+# CONFIG_SND_USB is not set
+# CONFIG_SND_PCMCIA is not set
 CONFIG_SND_SOC=m
-
-#
-# SoC Platforms
-#
-
-#
-# SoC Audio for the Atmel AT91
-#
-
-#
-# SoC Audio for the Intel PXA2xx
-#
+CONFIG_SND_SOC_AC97_BUS=y
 CONFIG_SND_PXA2XX_SOC=m
 CONFIG_SND_PXA2XX_SOC_AC97=m
-CONFIG_SND_PXA2XX_SOC_E740_WM9705=m
-CONFIG_SND_PXA2XX_SOC_E750_WM9705=m
-CONFIG_SND_PXA2XX_SOC_E800_WM9712=m
-# CONFIG_SND_PXA2XX_SOC_MAGICIAN is not set
-# CONFIG_SND_PXA2XX_SOC_BLUEANGEL is not set
-# CONFIG_SND_PXA2XX_SOC_H5000 is not set
-
-#
-# SoC Audio for the Freescale i.MX
-#
-
-#
-# SoC Audio for the Samsung S3C24XX
-#
-# CONFIG_SND_SOC_AC97_CODEC is not set
-# CONFIG_SND_SOC_WM8711 is not set
-# CONFIG_SND_SOC_WM8510 is not set
-# CONFIG_SND_SOC_WM8731 is not set
-# CONFIG_SND_SOC_WM8750 is not set
-# CONFIG_SND_SOC_WM8753 is not set
-# CONFIG_SND_SOC_WM8772 is not set
-# CONFIG_SND_SOC_WM8971 is not set
-# CONFIG_SND_SOC_WM8956 is not set
-# CONFIG_SND_SOC_WM8960 is not set
-# CONFIG_SND_SOC_WM8976 is not set
-# CONFIG_SND_SOC_WM8974 is not set
-# CONFIG_SND_SOC_WM8980 is not set
-CONFIG_SND_SOC_WM9705=m
-# CONFIG_SND_SOC_WM9713 is not set
+CONFIG_SND_PXA2XX_SOC_E800=m
 CONFIG_SND_SOC_WM9712=m
-# CONFIG_SND_SOC_UDA1380 is not set
-# CONFIG_SND_SOC_AK4535 is not set
-
-#
-# Open Sound System
-#
 # CONFIG_SOUND_PRIME is not set
 CONFIG_AC97_BUS=m
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+# CONFIG_HID_DEBUG is not set
+# CONFIG_HIDRAW is not set
 
 #
-# HID Devices
+# USB Input Devices
 #
-CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
+CONFIG_USB_HID=m
+# CONFIG_USB_HIDINPUT_POWERBOOK is not set
+# CONFIG_HID_FF is not set
+# CONFIG_USB_HIDDEV is not set
 
 #
-# USB support
+# USB HID Boot Protocol drivers
 #
+# CONFIG_USB_KBD is not set
+# CONFIG_USB_MOUSE is not set
+CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
+# CONFIG_USB_ARCH_HAS_OHCI is not set
 # CONFIG_USB_ARCH_HAS_EHCI is not set
 CONFIG_USB=m
-CONFIG_USB_DEBUG=y
+# CONFIG_USB_DEBUG is not set
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
 
 #
 # Miscellaneous USB options
 #
-CONFIG_USB_DEVICEFS=y
-CONFIG_USB_DYNAMIC_MINORS=y
+# CONFIG_USB_DEVICEFS is not set
+CONFIG_USB_DEVICE_CLASS=y
+# CONFIG_USB_DYNAMIC_MINORS is not set
 # CONFIG_USB_SUSPEND is not set
 # CONFIG_USB_OTG is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
 
 #
 # USB Host Controller Drivers
 #
+# CONFIG_USB_C67X00_HCD is not set
 # CONFIG_USB_ISP116X_HCD is not set
-# CONFIG_USB_OHCI_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
 # CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
 
 #
 # USB Device Class drivers
 #
 # CONFIG_USB_ACM is not set
 # CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
 
 #
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
@@ -1107,68 +976,19 @@ CONFIG_USB_DYNAMIC_MINORS=y
 #
 # may also be needed; see USB_STORAGE Help for more information
 #
-CONFIG_USB_STORAGE=m
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_DPCM is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE is not set
 # CONFIG_USB_LIBUSUAL is not set
 
 #
-# USB Input Devices
-#
-# CONFIG_USB_HID is not set
-
-#
-# USB HID Boot Protocol drivers
-#
-# CONFIG_USB_KBD is not set
-# CONFIG_USB_MOUSE is not set
-# CONFIG_USB_AIPTEK is not set
-# CONFIG_USB_WACOM is not set
-# CONFIG_USB_ACECAD is not set
-# CONFIG_USB_KBTAB is not set
-# CONFIG_USB_POWERMATE is not set
-# CONFIG_USB_TOUCHSCREEN is not set
-# CONFIG_USB_YEALINK is not set
-# CONFIG_USB_XPAD is not set
-# CONFIG_USB_ATI_REMOTE is not set
-# CONFIG_USB_ATI_REMOTE2 is not set
-# CONFIG_USB_KEYSPAN_REMOTE is not set
-# CONFIG_USB_APPLETOUCH is not set
-# CONFIG_USB_GTCO is not set
-
-#
 # USB Imaging devices
 #
 # CONFIG_USB_MDC800 is not set
 # CONFIG_USB_MICROTEK is not set
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET_MII is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_USB_MON is not set
+CONFIG_USB_MON=y
 
 #
 # USB port drivers
 #
-
-#
-# USB Serial Converter support
-#
 # CONFIG_USB_SERIAL is not set
 
 #
@@ -1192,56 +1012,57 @@ CONFIG_USB_STORAGE=m
 # CONFIG_USB_LD is not set
 # CONFIG_USB_TRANCEVIBRATOR is not set
 # CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
-
-#
-# USB DSL modem support
-#
-
-#
-# USB Gadget Support
-#
+# CONFIG_USB_ISIGHTFW is not set
 CONFIG_USB_GADGET=y
 # CONFIG_USB_GADGET_DEBUG_FILES is not set
 CONFIG_USB_GADGET_SELECTED=y
+# CONFIG_USB_GADGET_AMD5536UDC is not set
+# CONFIG_USB_GADGET_ATMEL_USBA is not set
+# CONFIG_USB_GADGET_FSL_USB2 is not set
 # CONFIG_USB_GADGET_NET2280 is not set
-CONFIG_USB_GADGET_PXA2XX=y
-CONFIG_USB_PXA2XX=y
-# CONFIG_USB_PXA2XX_SMALL is not set
+CONFIG_USB_GADGET_PXA25X=y
+CONFIG_USB_PXA25X=y
+CONFIG_USB_PXA25X_SMALL=y
+# CONFIG_USB_GADGET_M66592 is not set
 # CONFIG_USB_GADGET_PXA27X is not set
 # CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_MQ11XX is not set
 # CONFIG_USB_GADGET_LH7A40X is not set
-# CONFIG_USB_GADGET_S3C2410 is not set
 # CONFIG_USB_GADGET_OMAP is not set
+# CONFIG_USB_GADGET_S3C2410 is not set
 # CONFIG_USB_GADGET_AT91 is not set
 # CONFIG_USB_GADGET_DUMMY_HCD is not set
 # CONFIG_USB_GADGET_DUALSPEED is not set
 # CONFIG_USB_ZERO is not set
-CONFIG_USB_ETH=y
+CONFIG_USB_ETH=m
 # CONFIG_USB_ETH_RNDIS is not set
 # CONFIG_USB_GADGETFS is not set
 # CONFIG_USB_FILE_STORAGE is not set
 # CONFIG_USB_G_SERIAL is not set
 # CONFIG_USB_MIDI_GADGET is not set
-# CONFIG_USB_G_CHAR is not set
-# CONFIG_USB_PXA2XX_GPIO is not set
+# CONFIG_USB_G_PRINTER is not set
+# CONFIG_USB_CDC_COMPOSITE is not set
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+CONFIG_MMC_UNSAFE_RESUME=y
 
 #
-# MMC/SD Card support
+# MMC/SD Card Drivers
 #
-CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
 CONFIG_MMC_BLOCK=y
-# CONFIG_MMC_PXA is not set
-CONFIG_MMC_TMIO=y
-# CONFIG_MMC_SAMCOP is not set
+CONFIG_MMC_BLOCK_BOUNCE=y
+# CONFIG_SDIO_UART is not set
+# CONFIG_MMC_TEST is not set
 
 #
-# Real Time Clock
+# MMC/SD Host Controller Drivers
 #
+# CONFIG_MMC_PXA is not set
+# CONFIG_MMC_SDHCI is not set
+# CONFIG_NEW_LEDS is not set
 CONFIG_RTC_LIB=y
 # CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
+# CONFIG_UIO is not set
 
 #
 # File systems
@@ -1255,14 +1076,11 @@ CONFIG_EXT2_FS=y
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
 # CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
+CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
 # CONFIG_FUSE_FS is not set
@@ -1292,7 +1110,6 @@ CONFIG_SYSFS=y
 CONFIG_TMPFS=y
 # CONFIG_TMPFS_POSIX_ACL is not set
 # CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
 # CONFIG_CONFIGFS_FS is not set
 
 #
@@ -1305,30 +1122,21 @@ CONFIG_RAMFS=y
 # CONFIG_BEFS_FS is not set
 # CONFIG_BFS_FS is not set
 # CONFIG_EFS_FS is not set
-CONFIG_JFFS2_FS=m
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
+# CONFIG_JFFS2_FS is not set
 # CONFIG_CRAMFS is not set
 # CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
+CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 # CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
 # CONFIG_NFSD is not set
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
@@ -1341,7 +1149,6 @@ CONFIG_SUNRPC=y
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
 # CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
 
 #
 # Partition Types
@@ -1363,10 +1170,7 @@ CONFIG_MSDOS_PARTITION=y
 # CONFIG_SUN_PARTITION is not set
 # CONFIG_KARMA_PARTITION is not set
 # CONFIG_EFI_PARTITION is not set
-
-#
-# Native Language Support
-#
+# CONFIG_SYSV68_PARTITION is not set
 CONFIG_NLS=y
 CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=y
@@ -1407,30 +1211,32 @@ CONFIG_NLS_ISO8859_1=y
 # CONFIG_NLS_KOI8_R is not set
 # CONFIG_NLS_KOI8_U is not set
 # CONFIG_NLS_UTF8 is not set
-
-#
-# Distributed Lock Manager
-#
 # CONFIG_DLM is not set
 
 #
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
 # Kernel hacking
 #
 # CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_MUST_CHECK=y
+# CONFIG_ENABLE_WARN_DEPRECATED is not set
+# CONFIG_ENABLE_MUST_CHECK is not set
+CONFIG_FRAME_WARN=1024
 # CONFIG_MAGIC_SYSRQ is not set
 # CONFIG_UNUSED_SYMBOLS is not set
 # CONFIG_DEBUG_FS is not set
 # CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
-CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
 CONFIG_FRAME_POINTER=y
+# CONFIG_LATENCYTOP is not set
+CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+# CONFIG_FTRACE is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_DEBUG_USER is not set
 
 #
@@ -1438,61 +1244,102 @@ CONFIG_FRAME_POINTER=y
 #
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
 
 #
-# Cryptographic options
+# Crypto core or helper
 #
-CONFIG_CRYPTO=y
 CONFIG_CRYPTO_ALGAPI=m
 CONFIG_CRYPTO_BLKCIPHER=m
 CONFIG_CRYPTO_MANAGER=m
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=m
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=m
+# CONFIG_CRYPTO_LRW is not set
+CONFIG_CRYPTO_PCBC=m
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
 # CONFIG_CRYPTO_HMAC is not set
 # CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_NULL is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
 # CONFIG_CRYPTO_MD4 is not set
 # CONFIG_CRYPTO_MD5 is not set
+CONFIG_CRYPTO_MICHAEL_MIC=m
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
 # CONFIG_CRYPTO_SHA1 is not set
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
 # CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-CONFIG_CRYPTO_ECB=m
-CONFIG_CRYPTO_CBC=m
-CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+CONFIG_CRYPTO_AES=m
+# CONFIG_CRYPTO_ANUBIS is not set
+CONFIG_CRYPTO_ARC4=m
 # CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
 # CONFIG_CRYPTO_CAST5 is not set
 # CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-CONFIG_CRYPTO_ARC4=m
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
 # CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_TEST is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
 
 #
-# Hardware crypto devices
+# Compression
 #
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_LZO is not set
+CONFIG_CRYPTO_HW=y
 
 #
 # Library routines
 #
 CONFIG_BITREVERSE=y
-# CONFIG_CRC_CCITT is not set
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
+# CONFIG_GENERIC_FIND_NEXT_BIT is not set
+CONFIG_CRC_CCITT=y
 # CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
+# CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
 # CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=m
-CONFIG_ZLIB_DEFLATE=m
 CONFIG_PLIST=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/n770_defconfig b/arch/arm/configs/n770_defconfig
new file mode 100644
index 000000000000..568ef1770d5f
--- /dev/null
+++ b/arch/arm/configs/n770_defconfig
@@ -0,0 +1,1421 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.24-rc8-omap1
+# Fri Jan 18 10:21:06 2008
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_MMU=y
+# CONFIG_NO_IOPORT is not set
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_ZONE_DMA=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+CONFIG_POSIX_MQUEUE=y
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
+# CONFIG_AUDIT is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+CONFIG_FAIR_GROUP_SCHED=y
+CONFIG_FAIR_USER_SCHED=y
+# CONFIG_FAIR_CGROUP_SCHED is not set
+CONFIG_SYSFS_DEPRECATED=y
+# CONFIG_RELAY is not set
+# CONFIG_BLK_DEV_INITRD is not set
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+# CONFIG_EMBEDDED is not set
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+# CONFIG_KMOD is not set
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+# CONFIG_IOSCHED_AS is not set
+# CONFIG_IOSCHED_DEADLINE is not set
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+
+#
+# System Type
+#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS7500 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_CO285 is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_DAVINCI is not set
+CONFIG_ARCH_OMAP=y
+
+#
+# TI OMAP Implementations
+#
+CONFIG_ARCH_OMAP_OTG=y
+CONFIG_ARCH_OMAP1=y
+# CONFIG_ARCH_OMAP2 is not set
+# CONFIG_ARCH_OMAP3 is not set
+
+#
+# OMAP Feature Selections
+#
+CONFIG_OMAP_DEBUG_SRAM_PATCH=y
+CONFIG_OMAP_RESET_CLOCKS=y
+CONFIG_OMAP_BOOT_TAG=y
+CONFIG_OMAP_BOOT_REASON=y
+CONFIG_OMAP_COMPONENT_VERSION=y
+CONFIG_OMAP_GPIO_SWITCH=y
+# CONFIG_OMAP_MUX is not set
+CONFIG_OMAP_STI=y
+CONFIG_OMAP_STI_CONSOLE=y
+CONFIG_OMAP_MCBSP=y
+CONFIG_OMAP_MMU_FWK=y
+CONFIG_OMAP_MBOX_FWK=y
+# CONFIG_OMAP_MPU_TIMER is not set
+CONFIG_OMAP_32K_TIMER=y
+CONFIG_OMAP_32K_TIMER_HZ=128
+CONFIG_OMAP_DM_TIMER=y
+CONFIG_OMAP_LL_DEBUG_UART1=y
+# CONFIG_OMAP_LL_DEBUG_UART2 is not set
+# CONFIG_OMAP_LL_DEBUG_UART3 is not set
+
+#
+# OMAP Core Type
+#
+# CONFIG_ARCH_OMAP730 is not set
+# CONFIG_ARCH_OMAP15XX is not set
+CONFIG_ARCH_OMAP16XX=y
+
+#
+# OMAP Board Type
+#
+# CONFIG_MACH_OMAP_INNOVATOR is not set
+# CONFIG_MACH_OMAP_H2 is not set
+# CONFIG_MACH_OMAP_H3 is not set
+# CONFIG_MACH_OMAP_OSK is not set
+CONFIG_MACH_NOKIA770=y
+# CONFIG_MACH_OMAP_GENERIC is not set
+
+#
+# OMAP CPU Speed
+#
+CONFIG_OMAP_CLOCKS_SET_BY_BOOTLOADER=y
+CONFIG_OMAP_ARM_216MHZ=y
+# CONFIG_OMAP_ARM_192MHZ is not set
+# CONFIG_OMAP_ARM_168MHZ is not set
+# CONFIG_OMAP_ARM_120MHZ is not set
+# CONFIG_OMAP_ARM_60MHZ is not set
+# CONFIG_OMAP_ARM_30MHZ is not set
+
+#
+# Boot options
+#
+
+#
+# Power management
+#
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_ARM926T=y
+CONFIG_CPU_32v5=y
+CONFIG_CPU_ABRT_EV5TJ=y
+CONFIG_CPU_PABRT_NOIFAR=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_COPY_V4WB=y
+CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
+# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
+# CONFIG_OUTER_CACHE is not set
+
+#
+# Bus support
+#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+# CONFIG_TICK_ONESHOT is not set
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+# CONFIG_PREEMPT is not set
+CONFIG_HZ=128
+# CONFIG_AEABI is not set
+# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
+# CONFIG_LEDS is not set
+CONFIG_ALIGNMENT_TRAP=y
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="root=1f03 rootfstype=jffs2 time"
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# CPU Frequency scaling
+#
+# CONFIG_CPU_FREQ is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_FPE_NWFPE=y
+# CONFIG_FPE_NWFPE_XP is not set
+# CONFIG_FPE_FASTFPE is not set
+# CONFIG_VFP is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+# CONFIG_ARTHUR is not set
+
+#
+# Power management options
+#
+CONFIG_PM=y
+# CONFIG_PM_LEGACY is not set
+# CONFIG_PM_DEBUG is not set
+CONFIG_PM_SLEEP=y
+CONFIG_SUSPEND_UP_POSSIBLE=y
+CONFIG_SUSPEND=y
+# CONFIG_APM_EMULATION is not set
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_IP_MROUTE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
+# CONFIG_INET_DIAG is not set
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IP_VS is not set
+# CONFIG_IPV6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
+# CONFIG_NETLABEL is not set
+# CONFIG_NETWORK_SECMARK is not set
+CONFIG_NETFILTER=y
+# CONFIG_NETFILTER_DEBUG is not set
+
+#
+# Core Netfilter Configuration
+#
+CONFIG_NETFILTER_NETLINK=y
+# CONFIG_NETFILTER_NETLINK_QUEUE is not set
+# CONFIG_NETFILTER_NETLINK_LOG is not set
+# CONFIG_NF_CONNTRACK_ENABLED is not set
+# CONFIG_NF_CONNTRACK is not set
+# CONFIG_NETFILTER_XTABLES is not set
+
+#
+# IP: Netfilter Configuration
+#
+# CONFIG_IP_NF_QUEUE is not set
+# CONFIG_IP_NF_IPTABLES is not set
+# CONFIG_IP_NF_ARPTABLES is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+CONFIG_BT=y
+CONFIG_BT_L2CAP=y
+CONFIG_BT_SCO=y
+CONFIG_BT_RFCOMM=y
+CONFIG_BT_RFCOMM_TTY=y
+CONFIG_BT_BNEP=y
+# CONFIG_BT_BNEP_MC_FILTER is not set
+# CONFIG_BT_BNEP_PROTO_FILTER is not set
+CONFIG_BT_HIDP=y
+
+#
+# Bluetooth device drivers
+#
+# CONFIG_BT_HCIUSB is not set
+# CONFIG_BT_HCIBTUSB is not set
+# CONFIG_BT_HCIBTSDIO is not set
+# CONFIG_BT_HCIUART is not set
+# CONFIG_BT_HCIBCM203X is not set
+# CONFIG_BT_HCIBPA10X is not set
+# CONFIG_BT_HCIBFUSB is not set
+CONFIG_BT_HCIBRF6150=y
+# CONFIG_BT_HCIH4P is not set
+# CONFIG_BT_HCIVHCI is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
+# CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+CONFIG_CONNECTOR=y
+# CONFIG_PROC_EVENTS is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_AFS_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+# CONFIG_MTD_CFI is not set
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_DATAFLASH is not set
+# CONFIG_MTD_M25P80 is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+CONFIG_MTD_NAND=y
+# CONFIG_MTD_NAND_VERIFY_WRITE is not set
+# CONFIG_MTD_NAND_ECC_SMC is not set
+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
+CONFIG_MTD_NAND_OMAP_HW=y
+CONFIG_MTD_NAND_IDS=y
+# CONFIG_MTD_NAND_DISKONCHIP is not set
+# CONFIG_MTD_NAND_NANDSIM is not set
+# CONFIG_MTD_NAND_PLATFORM is not set
+# CONFIG_MTD_ALAUDA is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_UB is not set
+# CONFIG_BLK_DEV_RAM is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_EEPROM_93CX6 is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_SCSI_PROC_FS is not set
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+# CONFIG_SCSI_MULTI_LUN is not set
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+CONFIG_SCSI_LOWLEVEL=y
+# CONFIG_ISCSI_TCP is not set
+# CONFIG_SCSI_DEBUG is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+CONFIG_TUN=y
+# CONFIG_VETH is not set
+# CONFIG_PHYLIB is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_AX88796 is not set
+# CONFIG_SMC91X is not set
+# CONFIG_DM9000 is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_B44 is not set
+CONFIG_NETDEV_1000=y
+CONFIG_NETDEV_10000=y
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+CONFIG_USB_USBNET=y
+# CONFIG_USB_NET_AX8817X is not set
+CONFIG_USB_NET_CDCETHER=y
+# CONFIG_USB_NET_DM9601 is not set
+# CONFIG_USB_NET_GL620A is not set
+CONFIG_USB_NET_NET1080=y
+# CONFIG_USB_NET_PLUSB is not set
+# CONFIG_USB_NET_MCS7830 is not set
+# CONFIG_USB_NET_RNDIS_HOST is not set
+# CONFIG_USB_NET_CDC_SUBSET is not set
+CONFIG_USB_NET_ZAURUS=y
+# CONFIG_WAN is not set
+CONFIG_PPP=y
+# CONFIG_PPP_MULTILINK is not set
+CONFIG_PPP_FILTER=y
+CONFIG_PPP_ASYNC=y
+# CONFIG_PPP_SYNC_TTY is not set
+CONFIG_PPP_DEFLATE=y
+CONFIG_PPP_BSDCOMP=y
+# CONFIG_PPP_MPPE is not set
+# CONFIG_PPPOE is not set
+# CONFIG_PPPOL2TP is not set
+# CONFIG_SLIP is not set
+CONFIG_SLHC=y
+# CONFIG_SHAPER is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ATKBD is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+CONFIG_KEYBOARD_OMAP=y
+# CONFIG_KEYBOARD_GPIO is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+CONFIG_INPUT_TOUCHSCREEN=y
+CONFIG_TOUCHSCREEN_ADS7846=y
+# CONFIG_TOUCHSCREEN_FUJITSU is not set
+# CONFIG_TOUCHSCREEN_GUNZE is not set
+# CONFIG_TOUCHSCREEN_ELO is not set
+# CONFIG_TOUCHSCREEN_MTOUCH is not set
+# CONFIG_TOUCHSCREEN_MK712 is not set
+# CONFIG_TOUCHSCREEN_PENMOUNT is not set
+# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
+# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
+# CONFIG_TOUCHSCREEN_UCB1400 is not set
+# CONFIG_TOUCHSCREEN_TSC2102 is not set
+# CONFIG_TOUCHSCREEN_TSC210X is not set
+# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+CONFIG_SERIO_SERPORT=y
+# CONFIG_SERIO_RAW is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_NR_UARTS=4
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
+# CONFIG_SERIAL_8250_EXTENDED is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_IPMI_HANDLER is not set
+CONFIG_HW_RANDOM=m
+CONFIG_HW_RANDOM_OMAP=m
+# CONFIG_NVRAM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+# CONFIG_I2C_CHARDEV is not set
+
+#
+# I2C Algorithms
+#
+# CONFIG_I2C_ALGOBIT is not set
+# CONFIG_I2C_ALGOPCF is not set
+# CONFIG_I2C_ALGOPCA is not set
+
+#
+# I2C Hardware Bus support
+#
+# CONFIG_I2C_GPIO is not set
+# CONFIG_I2C_OCORES is not set
+CONFIG_I2C_OMAP=y
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_STUB is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_SENSORS_DS1337 is not set
+# CONFIG_SENSORS_DS1374 is not set
+# CONFIG_DS1682 is not set
+# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_ISP1301_OMAP is not set
+# CONFIG_TPS65010 is not set
+CONFIG_SENSORS_TLV320AIC23=y
+# CONFIG_GPIOEXPANDER_OMAP is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+
+#
+# SPI support
+#
+CONFIG_SPI=y
+# CONFIG_SPI_DEBUG is not set
+CONFIG_SPI_MASTER=y
+
+#
+# SPI Master Controller Drivers
+#
+CONFIG_SPI_BITBANG=y
+CONFIG_SPI_OMAP_UWIRE=y
+
+#
+# SPI Protocol Masters
+#
+# CONFIG_SPI_AT25 is not set
+# CONFIG_SPI_TSC2101 is not set
+# CONFIG_SPI_TSC2102 is not set
+# CONFIG_SPI_TSC210X is not set
+# CONFIG_SPI_TSC2301 is not set
+# CONFIG_SPI_SPIDEV is not set
+# CONFIG_SPI_TLE62X0 is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+CONFIG_WATCHDOG=y
+CONFIG_WATCHDOG_NOWAYOUT=y
+
+#
+# Watchdog Device Drivers
+#
+# CONFIG_SOFT_WATCHDOG is not set
+CONFIG_OMAP_WATCHDOG=y
+
+#
+# USB-based Watchdog Cards
+#
+# CONFIG_USBPCWATCHDOG is not set
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_SM501 is not set
+
+#
+# Multimedia devices
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+CONFIG_DAB=y
+# CONFIG_USB_DABUSB is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_SYS_FOPS is not set
+CONFIG_FB_DEFERRED_IO=y
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_UVESA is not set
+# CONFIG_FB_S1D13XXX is not set
+# CONFIG_FB_VIRTUAL is not set
+CONFIG_FB_OMAP=y
+CONFIG_FB_OMAP_LCDC_EXTERNAL=y
+CONFIG_FB_OMAP_LCDC_HWA742=y
+# CONFIG_FB_OMAP_LCDC_BLIZZARD is not set
+CONFIG_FB_OMAP_MANUAL_UPDATE=y
+# CONFIG_FB_OMAP_LCD_MIPID is not set
+# CONFIG_FB_OMAP_BOOTLOADER_INIT is not set
+CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE=2
+# CONFIG_FB_OMAP_DMA_TUNE is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE is not set
+# CONFIG_LOGO is not set
+
+#
+# Sound
+#
+CONFIG_SOUND=y
+
+#
+# Advanced Linux Sound Architecture
+#
+CONFIG_SND=y
+CONFIG_SND_TIMER=y
+CONFIG_SND_PCM=y
+CONFIG_SND_HWDEP=y
+CONFIG_SND_RAWMIDI=y
+# CONFIG_SND_SEQUENCER is not set
+# CONFIG_SND_MIXER_OSS is not set
+# CONFIG_SND_PCM_OSS is not set
+# CONFIG_SND_DYNAMIC_MINORS is not set
+# CONFIG_SND_SUPPORT_OLD_API is not set
+CONFIG_SND_VERBOSE_PROCFS=y
+# CONFIG_SND_VERBOSE_PRINTK is not set
+# CONFIG_SND_DEBUG is not set
+
+#
+# Generic devices
+#
+CONFIG_SND_DUMMY=y
+# CONFIG_SND_MTPAV is not set
+# CONFIG_SND_SERIAL_U16550 is not set
+# CONFIG_SND_MPU401 is not set
+
+#
+# ALSA ARM devices
+#
+CONFIG_SND_OMAP_AIC23=y
+# CONFIG_SND_OMAP_TSC2101 is not set
+# CONFIG_SND_SX1 is not set
+# CONFIG_SND_OMAP_TSC2102 is not set
+# CONFIG_SND_OMAP24XX_EAC is not set
+
+#
+# SPI devices
+#
+
+#
+# USB devices
+#
+CONFIG_SND_USB_AUDIO=y
+# CONFIG_SND_USB_CAIAQ is not set
+
+#
+# System on Chip audio support
+#
+# CONFIG_SND_SOC is not set
+
+#
+# SoC Audio support for SuperH
+#
+
+#
+# Open Sound System
+#
+# CONFIG_SOUND_PRIME is not set
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+CONFIG_HID_DEBUG=y
+# CONFIG_HIDRAW is not set
+
+#
+# USB Input Devices
+#
+CONFIG_USB_HID=y
+# CONFIG_USB_HIDINPUT_POWERBOOK is not set
+# CONFIG_HID_FF is not set
+# CONFIG_USB_HIDDEV is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+
+#
+# Miscellaneous USB options
+#
+CONFIG_USB_DEVICEFS=y
+CONFIG_USB_DEVICE_CLASS=y
+# CONFIG_USB_DYNAMIC_MINORS is not set
+CONFIG_USB_SUSPEND=y
+# CONFIG_USB_PERSIST is not set
+CONFIG_USB_OTG=y
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_ISP116X_HCD is not set
+CONFIG_USB_OHCI_HCD=y
+# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_MUSB_HDRC is not set
+# CONFIG_USB_GADGET_MUSB_HDRC is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# may also be needed; see USB_STORAGE Help for more information
+#
+CONFIG_USB_STORAGE=y
+# CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_ISD200 is not set
+# CONFIG_USB_STORAGE_DPCM is not set
+# CONFIG_USB_STORAGE_USBAT is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+# CONFIG_USB_MON is not set
+
+#
+# USB port drivers
+#
+
+#
+# USB Serial Converter support
+#
+CONFIG_USB_SERIAL=y
+CONFIG_USB_SERIAL_CONSOLE=y
+# CONFIG_USB_SERIAL_GENERIC is not set
+# CONFIG_USB_SERIAL_AIRCABLE is not set
+# CONFIG_USB_SERIAL_AIRPRIME is not set
+# CONFIG_USB_SERIAL_ARK3116 is not set
+# CONFIG_USB_SERIAL_BELKIN is not set
+# CONFIG_USB_SERIAL_CH341 is not set
+# CONFIG_USB_SERIAL_WHITEHEAT is not set
+# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
+# CONFIG_USB_SERIAL_CP2101 is not set
+# CONFIG_USB_SERIAL_CYPRESS_M8 is not set
+# CONFIG_USB_SERIAL_EMPEG is not set
+# CONFIG_USB_SERIAL_FTDI_SIO is not set
+# CONFIG_USB_SERIAL_FUNSOFT is not set
+# CONFIG_USB_SERIAL_VISOR is not set
+# CONFIG_USB_SERIAL_IPAQ is not set
+# CONFIG_USB_SERIAL_IR is not set
+# CONFIG_USB_SERIAL_EDGEPORT is not set
+# CONFIG_USB_SERIAL_EDGEPORT_TI is not set
+# CONFIG_USB_SERIAL_GARMIN is not set
+# CONFIG_USB_SERIAL_IPW is not set
+# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set
+# CONFIG_USB_SERIAL_KEYSPAN is not set
+# CONFIG_USB_SERIAL_KLSI is not set
+# CONFIG_USB_SERIAL_KOBIL_SCT is not set
+# CONFIG_USB_SERIAL_MCT_U232 is not set
+# CONFIG_USB_SERIAL_MOS7720 is not set
+# CONFIG_USB_SERIAL_MOS7840 is not set
+# CONFIG_USB_SERIAL_NAVMAN is not set
+CONFIG_USB_SERIAL_PL2303=y
+# CONFIG_USB_SERIAL_OTI6858 is not set
+# CONFIG_USB_SERIAL_HP4X is not set
+# CONFIG_USB_SERIAL_SAFE is not set
+# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set
+# CONFIG_USB_SERIAL_TI is not set
+# CONFIG_USB_SERIAL_CYBERJACK is not set
+# CONFIG_USB_SERIAL_XIRCOM is not set
+# CONFIG_USB_SERIAL_OPTION is not set
+# CONFIG_USB_SERIAL_OMNINET is not set
+# CONFIG_USB_SERIAL_DEBUG is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_AUERSWALD is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_PHIDGET is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_TEST is not set
+
+#
+# USB DSL modem support
+#
+
+#
+# USB Gadget Support
+#
+CONFIG_USB_GADGET=y
+# CONFIG_USB_GADGET_DEBUG is not set
+# CONFIG_USB_GADGET_DEBUG_FILES is not set
+CONFIG_USB_GADGET_SELECTED=y
+# CONFIG_USB_GADGET_AMD5536UDC is not set
+# CONFIG_USB_GADGET_ATMEL_USBA is not set
+# CONFIG_USB_GADGET_FSL_USB2 is not set
+# CONFIG_USB_GADGET_NET2280 is not set
+# CONFIG_USB_GADGET_PXA2XX is not set
+# CONFIG_USB_GADGET_M66592 is not set
+# CONFIG_USB_GADGET_GOKU is not set
+# CONFIG_USB_GADGET_LH7A40X is not set
+CONFIG_USB_GADGET_OMAP=y
+CONFIG_USB_OMAP=y
+# CONFIG_USB_GADGET_S3C2410 is not set
+# CONFIG_USB_GADGET_AT91 is not set
+# CONFIG_USB_GADGET_DUMMY_HCD is not set
+# CONFIG_USB_GADGET_DUALSPEED is not set
+# CONFIG_USB_ZERO is not set
+CONFIG_USB_ETH=m
+CONFIG_USB_ETH_RNDIS=y
+# CONFIG_USB_GADGETFS is not set
+CONFIG_USB_FILE_STORAGE=m
+CONFIG_USB_FILE_STORAGE_TEST=y
+# CONFIG_USB_G_SERIAL is not set
+# CONFIG_USB_MIDI_GADGET is not set
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+# CONFIG_MMC_UNSAFE_RESUME is not set
+
+#
+# MMC/SD Card Drivers
+#
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_BLOCK_BOUNCE=y
+# CONFIG_SDIO_UART is not set
+
+#
+# MMC/SD Host Controller Drivers
+#
+CONFIG_MMC_OMAP=y
+# CONFIG_MMC_SPI is not set
+# CONFIG_NEW_LEDS is not set
+CONFIG_RTC_LIB=y
+# CONFIG_RTC_CLASS is not set
+
+#
+# CBUS support
+#
+CONFIG_CBUS=y
+CONFIG_CBUS_TAHVO=y
+CONFIG_CBUS_TAHVO_USER=y
+CONFIG_CBUS_TAHVO_USB=y
+# CONFIG_CBUS_TAHVO_USB_HOST_BY_DEFAULT is not set
+CONFIG_CBUS_RETU=y
+CONFIG_CBUS_RETU_USER=y
+CONFIG_CBUS_RETU_POWERBUTTON=y
+CONFIG_CBUS_RETU_RTC=y
+CONFIG_CBUS_RETU_WDT=y
+# CONFIG_CBUS_RETU_HEADSET is not set
+CONFIG_OMAP_DSP=y
+# CONFIG_OMAP_DSP_MBCMD_VERBOSE is not set
+CONFIG_OMAP_DSP_FBEXPORT=y
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+CONFIG_EXT3_FS_XATTR=y
+# CONFIG_EXT3_FS_POSIX_ACL is not set
+# CONFIG_EXT3_FS_SECURITY is not set
+# CONFIG_EXT4DEV_FS is not set
+CONFIG_JBD=y
+CONFIG_FS_MBCACHE=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_INOTIFY is not set
+# CONFIG_QUOTA is not set
+CONFIG_DNOTIFY=y
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+CONFIG_JFFS2_SUMMARY=y
+# CONFIG_JFFS2_FS_XATTR is not set
+CONFIG_JFFS2_COMPRESSION_OPTIONS=y
+CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+# CONFIG_JFFS2_CMODE_NONE is not set
+CONFIG_JFFS2_CMODE_PRIORITY=y
+# CONFIG_JFFS2_CMODE_SIZE is not set
+# CONFIG_JFFS2_CMODE_FAVOURLZO is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+# CONFIG_NFS_V4 is not set
+# CONFIG_NFS_DIRECTIO is not set
+# CONFIG_NFSD is not set
+# CONFIG_ROOT_NFS is not set
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_SUNRPC_BIND34 is not set
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_BSD_DISKLABEL is not set
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_UNIXWARE_DISKLABEL is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+# CONFIG_SYSV68_PARTITION is not set
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+CONFIG_NLS_CODEPAGE_852=y
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+CONFIG_NLS_ISO8859_1=y
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+CONFIG_NLS_ISO8859_15=y
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+CONFIG_NLS_UTF8=y
+# CONFIG_DLM is not set
+CONFIG_INSTRUMENTATION=y
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+CONFIG_DEBUG_MUTEXES=y
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+CONFIG_FRAME_POINTER=y
+CONFIG_FORCED_INLINING=y
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_SAMPLES is not set
+# CONFIG_DEBUG_USER is not set
+CONFIG_DEBUG_ERRORS=y
+# CONFIG_DEBUG_LL is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+CONFIG_SECURITY=y
+# CONFIG_SECURITY_NETWORK is not set
+# CONFIG_SECURITY_CAPABILITIES is not set
+# CONFIG_SECURITY_ROOTPLUG is not set
+# CONFIG_SECURITY_LOWMEM is not set
+# CONFIG_CRYPTO is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_CRC_CCITT=y
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/omap_2430sdp_defconfig b/arch/arm/configs/omap_2430sdp_defconfig
new file mode 100644
index 000000000000..b0617c0da2a1
--- /dev/null
+++ b/arch/arm/configs/omap_2430sdp_defconfig
@@ -0,0 +1,1304 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.23-rc6-omap1
+# Tue Sep 18 11:47:37 2007
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_MMU=y
+# CONFIG_NO_IOPORT is not set
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_ZONE_DMA=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+CONFIG_BSD_PROCESS_ACCT=y
+# CONFIG_BSD_PROCESS_ACCT_V3 is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_AUDIT is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_SYSFS_DEPRECATED=y
+# CONFIG_RELAY is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_EMBEDDED=y
+CONFIG_UID16=y
+# CONFIG_SYSCTL_SYSCALL is not set
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+CONFIG_KALLSYMS_EXTRA_PASS=y
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+CONFIG_MODVERSIONS=y
+CONFIG_MODULE_SRCVERSION_ALL=y
+CONFIG_KMOD=y
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+
+#
+# System Type
+#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS7500 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_CO285 is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_DAVINCI is not set
+CONFIG_ARCH_OMAP=y
+
+#
+# TI OMAP Implementations
+#
+# CONFIG_ARCH_OMAP1 is not set
+CONFIG_ARCH_OMAP2=y
+# CONFIG_ARCH_OMAP3 is not set
+
+#
+# OMAP Feature Selections
+#
+# CONFIG_OMAP_RESET_CLOCKS is not set
+CONFIG_OMAP_BOOT_TAG=y
+# CONFIG_OMAP_BOOT_REASON is not set
+# CONFIG_OMAP_COMPONENT_VERSION is not set
+# CONFIG_OMAP_GPIO_SWITCH is not set
+CONFIG_OMAP_MUX=y
+# CONFIG_OMAP_MUX_DEBUG is not set
+# CONFIG_OMAP_MUX_WARNINGS is not set
+# CONFIG_OMAP_STI is not set
+CONFIG_OMAP_MCBSP=y
+# CONFIG_OMAP_MMU_FWK is not set
+# CONFIG_OMAP_MBOX_FWK is not set
+CONFIG_OMAP_MPU_TIMER=y
+# CONFIG_OMAP_32K_TIMER is not set
+CONFIG_OMAP_DM_TIMER=y
+CONFIG_OMAP_LL_DEBUG_UART1=y
+# CONFIG_OMAP_LL_DEBUG_UART2 is not set
+# CONFIG_OMAP_LL_DEBUG_UART3 is not set
+CONFIG_OMAP_SERIAL_WAKE=y
+# CONFIG_OMAP_DSP is not set
+# CONFIG_MACH_OMAP_GENERIC is not set
+
+#
+# OMAP Core Type
+#
+CONFIG_ARCH_OMAP24XX=y
+# CONFIG_ARCH_OMAP2420 is not set
+CONFIG_ARCH_OMAP2430=y
+
+#
+# OMAP Board Type
+#
+# CONFIG_MACH_NOKIA_N800 is not set
+# CONFIG_MACH_OMAP_H4 is not set
+# CONFIG_MACH_OMAP_APOLLON is not set
+# CONFIG_MACH_OMAP_APOLLON_PLUS is not set
+CONFIG_MACH_OMAP_2430SDP=y
+
+#
+# Boot options
+#
+
+#
+# Power management
+#
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_V6=y
+# CONFIG_CPU_32v6K is not set
+CONFIG_CPU_32v6=y
+CONFIG_CPU_ABRT_EV6=y
+CONFIG_CPU_PABRT_NOIFAR=y
+CONFIG_CPU_CACHE_V6=y
+CONFIG_CPU_CACHE_VIPT=y
+CONFIG_CPU_COPY_V6=y
+CONFIG_CPU_TLB_V6=y
+CONFIG_CPU_HAS_ASID=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_BPREDICT_DISABLE is not set
+# CONFIG_OUTER_CACHE is not set
+
+#
+# Bus support
+#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+
+#
+# PCCARD (PCMCIA/CardBus) support
+#
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+# CONFIG_TICK_ONESHOT is not set
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_PREEMPT=y
+CONFIG_HZ=100
+CONFIG_AEABI=y
+CONFIG_OABI_COMPAT=y
+# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
+# CONFIG_LEDS is not set
+CONFIG_ALIGNMENT_TRAP=y
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="root=/dev/ram0 rw console=ttyS0,115200n8 initrd=0x80600000,8M ramdisk_size=8192"
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# CPU Frequency scaling
+#
+# CONFIG_CPU_FREQ is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_FPE_NWFPE=y
+# CONFIG_FPE_NWFPE_XP is not set
+# CONFIG_FPE_FASTFPE is not set
+# CONFIG_VFP is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_AOUT is not set
+CONFIG_BINFMT_MISC=y
+
+#
+# Power management options
+#
+CONFIG_PM=y
+# CONFIG_PM_LEGACY is not set
+# CONFIG_PM_DEBUG is not set
+CONFIG_PM_SLEEP=y
+CONFIG_SUSPEND_UP_POSSIBLE=y
+CONFIG_SUSPEND=y
+# CONFIG_APM_EMULATION is not set
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+CONFIG_NET_KEY=y
+# CONFIG_NET_KEY_MIGRATE is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+# CONFIG_IP_PNP_BOOTP is not set
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
+# CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_FW_LOADER is not set
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+CONFIG_MTD_CONCAT=y
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_AFS_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+CONFIG_MTD_CFI_INTELEXT=y
+# CONFIG_MTD_CFI_AMDSTD is not set
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_PHYSMAP is not set
+# CONFIG_MTD_ARM_INTEGRATOR is not set
+CONFIG_MTD_OMAP_NOR=y
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_DATAFLASH is not set
+# CONFIG_MTD_M25P80 is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+# CONFIG_MTD_NAND is not set
+CONFIG_MTD_ONENAND=y
+CONFIG_MTD_ONENAND_VERIFY_WRITE=y
+# CONFIG_MTD_ONENAND_GENERIC is not set
+CONFIG_MTD_ONENAND_OMAP2=y
+# CONFIG_MTD_ONENAND_OTP is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=16384
+CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=m
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=m
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+CONFIG_CHR_DEV_SG=m
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+# CONFIG_SCSI_MULTI_LUN is not set
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+CONFIG_SCSI_LOWLEVEL=y
+# CONFIG_ISCSI_TCP is not set
+# CONFIG_SCSI_DEBUG is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_PHYLIB is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_AX88796 is not set
+CONFIG_SMC91X=y
+# CONFIG_DM9000 is not set
+CONFIG_NETDEV_1000=y
+CONFIG_NETDEV_10000=y
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET_MII is not set
+# CONFIG_USB_USBNET is not set
+# CONFIG_WAN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_SHAPER is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_TSDEV is not set
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ATKBD is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_OMAP is not set
+CONFIG_KEYBOARD_TWL4030=y
+# CONFIG_KEYBOARD_GPIO is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+CONFIG_INPUT_TOUCHSCREEN=y
+CONFIG_TOUCHSCREEN_ADS7846=y
+# CONFIG_TOUCHSCREEN_FUJITSU is not set
+# CONFIG_TOUCHSCREEN_GUNZE is not set
+# CONFIG_TOUCHSCREEN_ELO is not set
+# CONFIG_TOUCHSCREEN_MTOUCH is not set
+# CONFIG_TOUCHSCREEN_MK712 is not set
+# CONFIG_TOUCHSCREEN_PENMOUNT is not set
+# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
+# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
+# CONFIG_TOUCHSCREEN_UCB1400 is not set
+# CONFIG_TOUCHSCREEN_TSC2102 is not set
+# CONFIG_TOUCHSCREEN_TSC210X is not set
+# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_NR_UARTS=32
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
+CONFIG_SERIAL_8250_EXTENDED=y
+CONFIG_SERIAL_8250_MANY_PORTS=y
+CONFIG_SERIAL_8250_SHARE_IRQ=y
+CONFIG_SERIAL_8250_DETECT_IRQ=y
+CONFIG_SERIAL_8250_RSA=y
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_IPMI_HANDLER is not set
+CONFIG_WATCHDOG=y
+CONFIG_WATCHDOG_NOWAYOUT=y
+
+#
+# Watchdog Device Drivers
+#
+# CONFIG_SOFT_WATCHDOG is not set
+CONFIG_OMAP_WATCHDOG=y
+
+#
+# USB-based Watchdog Cards
+#
+# CONFIG_USBPCWATCHDOG is not set
+CONFIG_HW_RANDOM=y
+CONFIG_HW_RANDOM_OMAP=y
+# CONFIG_NVRAM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_CHARDEV=y
+
+#
+# I2C Algorithms
+#
+# CONFIG_I2C_ALGOBIT is not set
+# CONFIG_I2C_ALGOPCF is not set
+# CONFIG_I2C_ALGOPCA is not set
+
+#
+# I2C Hardware Bus support
+#
+# CONFIG_I2C_GPIO is not set
+# CONFIG_I2C_OCORES is not set
+CONFIG_I2C_OMAP=y
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_STUB is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_SENSORS_DS1337 is not set
+# CONFIG_SENSORS_DS1374 is not set
+# CONFIG_DS1682 is not set
+# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_TPS65010 is not set
+# CONFIG_SENSORS_TLV320AIC23 is not set
+# CONFIG_GPIOEXPANDER_OMAP is not set
+CONFIG_TWL4030_CORE=y
+CONFIG_TWL4030_GPIO=y
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_MENELAUS is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+
+#
+# SPI support
+#
+CONFIG_SPI=y
+# CONFIG_SPI_DEBUG is not set
+CONFIG_SPI_MASTER=y
+
+#
+# SPI Master Controller Drivers
+#
+# CONFIG_SPI_BITBANG is not set
+# CONFIG_SPI_OMAP24XX is not set
+
+#
+# SPI Protocol Masters
+#
+# CONFIG_SPI_AT25 is not set
+# CONFIG_SPI_TSC2101 is not set
+# CONFIG_SPI_TSC2102 is not set
+# CONFIG_SPI_TSC210X is not set
+# CONFIG_SPI_TSC2301 is not set
+# CONFIG_SPI_SPIDEV is not set
+# CONFIG_SPI_TLE62X0 is not set
+# CONFIG_W1 is not set
+# CONFIG_HWMON is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_EEPROM_93CX6 is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_SM501 is not set
+# CONFIG_NEW_LEDS is not set
+
+#
+# Multimedia devices
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+CONFIG_DAB=y
+# CONFIG_USB_DABUSB is not set
+
+#
+# Graphics support
+#
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+# CONFIG_VGASTATE is not set
+CONFIG_VIDEO_OUTPUT_CONTROL=m
+CONFIG_FB=y
+CONFIG_FIRMWARE_EDID=y
+# CONFIG_FB_DDC is not set
+# CONFIG_FB_CFB_FILLRECT is not set
+# CONFIG_FB_CFB_COPYAREA is not set
+# CONFIG_FB_CFB_IMAGEBLIT is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_SYS_FOPS is not set
+CONFIG_FB_DEFERRED_IO=y
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_S1D13XXX is not set
+CONFIG_FB_OMAP=y
+# CONFIG_FB_OMAP_LCDC_EXTERNAL is not set
+# CONFIG_FB_OMAP_BOOTLOADER_INIT is not set
+CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE=2
+# CONFIG_FB_VIRTUAL is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
+# CONFIG_FONTS is not set
+CONFIG_FONT_8x8=y
+CONFIG_FONT_8x16=y
+CONFIG_LOGO=y
+# CONFIG_LOGO_LINUX_MONO is not set
+# CONFIG_LOGO_LINUX_VGA16 is not set
+CONFIG_LOGO_LINUX_CLUT224=y
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+# CONFIG_HID_DEBUG is not set
+
+#
+# USB Input Devices
+#
+CONFIG_USB_HID=m
+# CONFIG_USB_HIDINPUT_POWERBOOK is not set
+# CONFIG_HID_FF is not set
+# CONFIG_USB_HIDDEV is not set
+
+#
+# USB HID Boot Protocol drivers
+#
+# CONFIG_USB_KBD is not set
+# CONFIG_USB_MOUSE is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+CONFIG_USB=m
+# CONFIG_USB_DEBUG is not set
+
+#
+# Miscellaneous USB options
+#
+# CONFIG_USB_DEVICEFS is not set
+# CONFIG_USB_DEVICE_CLASS is not set
+# CONFIG_USB_DYNAMIC_MINORS is not set
+CONFIG_USB_SUSPEND=y
+# CONFIG_USB_PERSIST is not set
+CONFIG_USB_OTG=y
+CONFIG_USB_OTG_WHITELIST=y
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_OHCI_HCD is not set
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+CONFIG_USB_MUSB_HDRC=m
+CONFIG_USB_MUSB_SOC=y
+
+#
+# OMAP 243x high speed USB support
+#
+# CONFIG_USB_MUSB_HOST is not set
+# CONFIG_USB_MUSB_PERIPHERAL is not set
+CONFIG_USB_MUSB_OTG=y
+CONFIG_USB_GADGET_MUSB_HDRC=y
+CONFIG_USB_MUSB_HDRC_HCD=y
+# CONFIG_MUSB_PIO_ONLY is not set
+CONFIG_USB_INVENTRA_DMA=y
+# CONFIG_USB_TI_CPPI_DMA is not set
+CONFIG_USB_MUSB_LOGLEVEL=0
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# may also be needed; see USB_STORAGE Help for more information
+#
+CONFIG_USB_STORAGE=m
+# CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_DPCM is not set
+# CONFIG_USB_STORAGE_USBAT is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+CONFIG_USB_MON=y
+
+#
+# USB port drivers
+#
+
+#
+# USB Serial Converter support
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_AUERSWALD is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_PHIDGET is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+
+#
+# USB DSL modem support
+#
+
+#
+# USB Gadget Support
+#
+CONFIG_USB_GADGET=m
+# CONFIG_USB_GADGET_DEBUG is not set
+CONFIG_USB_GADGET_DEBUG_FILES=y
+CONFIG_USB_GADGET_SELECTED=y
+# CONFIG_USB_GADGET_AMD5536UDC is not set
+# CONFIG_USB_GADGET_FSL_USB2 is not set
+# CONFIG_USB_GADGET_NET2280 is not set
+# CONFIG_USB_GADGET_PXA2XX is not set
+# CONFIG_USB_GADGET_M66592 is not set
+# CONFIG_USB_GADGET_GOKU is not set
+# CONFIG_USB_GADGET_LH7A40X is not set
+# CONFIG_USB_GADGET_OMAP is not set
+# CONFIG_USB_GADGET_S3C2410 is not set
+# CONFIG_USB_GADGET_AT91 is not set
+# CONFIG_USB_GADGET_DUMMY_HCD is not set
+CONFIG_USB_GADGET_DUALSPEED=y
+CONFIG_USB_ZERO=m
+# CONFIG_USB_ZERO_HNPTEST is not set
+CONFIG_USB_ETH=m
+CONFIG_USB_ETH_RNDIS=y
+CONFIG_USB_GADGETFS=m
+CONFIG_USB_FILE_STORAGE=m
+# CONFIG_USB_FILE_STORAGE_TEST is not set
+CONFIG_USB_G_SERIAL=m
+# CONFIG_USB_MIDI_GADGET is not set
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+# CONFIG_MMC_UNSAFE_RESUME is not set
+
+#
+# MMC/SD Card Drivers
+#
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_BLOCK_BOUNCE=y
+
+#
+# MMC/SD Host Controller Drivers
+#
+CONFIG_MMC_OMAP_HS=y
+CONFIG_RTC_LIB=y
+# CONFIG_RTC_CLASS is not set
+
+#
+# DMA Engine support
+#
+# CONFIG_DMA_ENGINE is not set
+
+#
+# DMA Clients
+#
+
+#
+# DMA Devices
+#
+
+#
+# CBUS support
+#
+# CONFIG_CBUS is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+# CONFIG_EXT3_FS_XATTR is not set
+# CONFIG_EXT4DEV_FS is not set
+CONFIG_JBD=y
+# CONFIG_JBD_DEBUG is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+CONFIG_QUOTA=y
+# CONFIG_QFMT_V1 is not set
+CONFIG_QFMT_V2=y
+CONFIG_QUOTACTL=y
+CONFIG_DNOTIFY=y
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_RAMFS=y
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_XATTR is not set
+CONFIG_JFFS2_COMPRESSION_OPTIONS=y
+CONFIG_JFFS2_ZLIB=y
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+# CONFIG_JFFS2_CMODE_NONE is not set
+CONFIG_JFFS2_CMODE_PRIORITY=y
+# CONFIG_JFFS2_CMODE_SIZE is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+
+#
+# Network File Systems
+#
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+# CONFIG_NFS_V4 is not set
+# CONFIG_NFS_DIRECTIO is not set
+# CONFIG_NFSD is not set
+CONFIG_ROOT_NFS=y
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_SUNRPC_BIND34 is not set
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_BSD_DISKLABEL is not set
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_UNIXWARE_DISKLABEL is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+# CONFIG_SYSV68_PARTITION is not set
+
+#
+# Native Language Support
+#
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+# CONFIG_NLS_ISO8859_1 is not set
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+
+#
+# Distributed Lock Manager
+#
+# CONFIG_DLM is not set
+
+#
+# Profiling support
+#
+# CONFIG_PROFILING is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHEDSTATS is not set
+CONFIG_TIMER_STATS=y
+# CONFIG_DEBUG_SLAB is not set
+CONFIG_DEBUG_PREEMPT=y
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+CONFIG_DEBUG_MUTEXES=y
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_LIST is not set
+CONFIG_FRAME_POINTER=y
+CONFIG_FORCED_INLINING=y
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_DEBUG_USER is not set
+# CONFIG_DEBUG_ERRORS is not set
+# CONFIG_DEBUG_LL is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+CONFIG_CRYPTO=y
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_MANAGER=y
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_MD4 is not set
+CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_WP512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+CONFIG_CRYPTO_ECB=m
+CONFIG_CRYPTO_CBC=y
+CONFIG_CRYPTO_PCBC=m
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_TEST is not set
+CONFIG_CRYPTO_HW=y
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_CRC_CCITT=y
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+CONFIG_LIBCRC32C=y
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/omap_apollon_2420_defconfig b/arch/arm/configs/omap_apollon_2420_defconfig
new file mode 100644
index 000000000000..bb39dfc72d69
--- /dev/null
+++ b/arch/arm/configs/omap_apollon_2420_defconfig
@@ -0,0 +1,962 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.23-rc6-omap1
+# Tue Sep 18 12:07:29 2007
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_MMU=y
+# CONFIG_NO_IOPORT is not set
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_ZONE_DMA=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+CONFIG_BSD_PROCESS_ACCT=y
+# CONFIG_BSD_PROCESS_ACCT_V3 is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_AUDIT is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_SYSFS_DEPRECATED=y
+# CONFIG_RELAY is not set
+# CONFIG_BLK_DEV_INITRD is not set
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+# CONFIG_EMBEDDED is not set
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+CONFIG_KALLSYMS_EXTRA_PASS=y
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+
+#
+# System Type
+#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS7500 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_CO285 is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_DAVINCI is not set
+CONFIG_ARCH_OMAP=y
+
+#
+# TI OMAP Implementations
+#
+CONFIG_ARCH_OMAP_OTG=y
+# CONFIG_ARCH_OMAP1 is not set
+CONFIG_ARCH_OMAP2=y
+# CONFIG_ARCH_OMAP3 is not set
+
+#
+# OMAP Feature Selections
+#
+# CONFIG_OMAP_RESET_CLOCKS is not set
+# CONFIG_OMAP_BOOT_TAG is not set
+# CONFIG_OMAP_GPIO_SWITCH is not set
+CONFIG_OMAP_MUX=y
+# CONFIG_OMAP_MUX_DEBUG is not set
+CONFIG_OMAP_MUX_WARNINGS=y
+# CONFIG_OMAP_STI is not set
+# CONFIG_OMAP_MCBSP is not set
+# CONFIG_OMAP_MMU_FWK is not set
+# CONFIG_OMAP_MBOX_FWK is not set
+# CONFIG_OMAP_MPU_TIMER is not set
+CONFIG_OMAP_32K_TIMER=y
+CONFIG_OMAP_32K_TIMER_HZ=128
+CONFIG_OMAP_DM_TIMER=y
+CONFIG_OMAP_LL_DEBUG_UART1=y
+# CONFIG_OMAP_LL_DEBUG_UART2 is not set
+# CONFIG_OMAP_LL_DEBUG_UART3 is not set
+CONFIG_OMAP_SERIAL_WAKE=y
+# CONFIG_OMAP_DSP is not set
+# CONFIG_MACH_OMAP_GENERIC is not set
+
+#
+# OMAP Core Type
+#
+CONFIG_ARCH_OMAP24XX=y
+CONFIG_ARCH_OMAP2420=y
+# CONFIG_ARCH_OMAP2430 is not set
+
+#
+# OMAP Board Type
+#
+# CONFIG_MACH_NOKIA_N800 is not set
+# CONFIG_MACH_OMAP_H4 is not set
+CONFIG_MACH_OMAP_APOLLON=y
+# CONFIG_MACH_OMAP_APOLLON_PLUS is not set
+# CONFIG_MACH_OMAP_2430SDP is not set
+
+#
+# Boot options
+#
+
+#
+# Power management
+#
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_V6=y
+# CONFIG_CPU_32v6K is not set
+CONFIG_CPU_32v6=y
+CONFIG_CPU_ABRT_EV6=y
+CONFIG_CPU_PABRT_NOIFAR=y
+CONFIG_CPU_CACHE_V6=y
+CONFIG_CPU_CACHE_VIPT=y
+CONFIG_CPU_COPY_V6=y
+CONFIG_CPU_TLB_V6=y
+CONFIG_CPU_HAS_ASID=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+# CONFIG_ARM_THUMB is not set
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_BPREDICT_DISABLE is not set
+# CONFIG_OUTER_CACHE is not set
+
+#
+# Bus support
+#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+
+#
+# PCCARD (PCMCIA/CardBus) support
+#
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+# CONFIG_TICK_ONESHOT is not set
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_PREEMPT=y
+CONFIG_HZ=128
+# CONFIG_AEABI is not set
+# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
+# CONFIG_LEDS is not set
+CONFIG_ALIGNMENT_TRAP=y
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="root=/dev/ram0 rw mem=128M console=ttyS0,115200n8 initrd=0x80600000,8M ramdisk_size=8192"
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# CPU Frequency scaling
+#
+# CONFIG_CPU_FREQ is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+# CONFIG_FPE_NWFPE is not set
+# CONFIG_FPE_FASTFPE is not set
+CONFIG_VFP=y
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+# CONFIG_ARTHUR is not set
+
+#
+# Power management options
+#
+# CONFIG_PM is not set
+CONFIG_SUSPEND_UP_POSSIBLE=y
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
+# CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_FW_LOADER is not set
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+CONFIG_MTD_CONCAT=y
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_AFS_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+# CONFIG_MTD_CFI is not set
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_DATAFLASH is not set
+# CONFIG_MTD_M25P80 is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+# CONFIG_MTD_NAND is not set
+CONFIG_MTD_ONENAND=y
+# CONFIG_MTD_ONENAND_VERIFY_WRITE is not set
+CONFIG_MTD_ONENAND_GENERIC=y
+# CONFIG_MTD_ONENAND_OMAP2 is not set
+# CONFIG_MTD_ONENAND_OTP is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_RAM is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_PHYLIB is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_AX88796 is not set
+CONFIG_SMC91X=y
+# CONFIG_DM9000 is not set
+CONFIG_NETDEV_1000=y
+CONFIG_NETDEV_10000=y
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+# CONFIG_WAN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_SHAPER is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_TSDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_NR_UARTS=32
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
+CONFIG_SERIAL_8250_EXTENDED=y
+CONFIG_SERIAL_8250_MANY_PORTS=y
+CONFIG_SERIAL_8250_SHARE_IRQ=y
+CONFIG_SERIAL_8250_DETECT_IRQ=y
+CONFIG_SERIAL_8250_RSA=y
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_IPMI_HANDLER is not set
+CONFIG_WATCHDOG=y
+# CONFIG_WATCHDOG_NOWAYOUT is not set
+
+#
+# Watchdog Device Drivers
+#
+# CONFIG_SOFT_WATCHDOG is not set
+CONFIG_OMAP_WATCHDOG=y
+CONFIG_HW_RANDOM=y
+CONFIG_HW_RANDOM_OMAP=y
+# CONFIG_NVRAM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+# CONFIG_I2C is not set
+
+#
+# SPI support
+#
+CONFIG_SPI=y
+# CONFIG_SPI_DEBUG is not set
+CONFIG_SPI_MASTER=y
+
+#
+# SPI Master Controller Drivers
+#
+# CONFIG_SPI_BITBANG is not set
+CONFIG_SPI_OMAP24XX=y
+
+#
+# SPI Protocol Masters
+#
+# CONFIG_SPI_AT25 is not set
+# CONFIG_SPI_TSC2101 is not set
+# CONFIG_SPI_TSC2102 is not set
+# CONFIG_SPI_TSC210X is not set
+# CONFIG_SPI_TSC2301 is not set
+# CONFIG_SPI_SPIDEV is not set
+# CONFIG_SPI_TLE62X0 is not set
+# CONFIG_W1 is not set
+# CONFIG_HWMON is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_EEPROM_93CX6 is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_SM501 is not set
+# CONFIG_NEW_LEDS is not set
+
+#
+# Multimedia devices
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+CONFIG_DAB=y
+
+#
+# Graphics support
+#
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+# CONFIG_VGASTATE is not set
+CONFIG_VIDEO_OUTPUT_CONTROL=m
+CONFIG_FB=y
+CONFIG_FIRMWARE_EDID=y
+# CONFIG_FB_DDC is not set
+# CONFIG_FB_CFB_FILLRECT is not set
+# CONFIG_FB_CFB_COPYAREA is not set
+# CONFIG_FB_CFB_IMAGEBLIT is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_SYS_FOPS is not set
+CONFIG_FB_DEFERRED_IO=y
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_S1D13XXX is not set
+CONFIG_FB_OMAP=y
+# CONFIG_FB_OMAP_LCDC_EXTERNAL is not set
+# CONFIG_FB_OMAP_BOOTLOADER_INIT is not set
+CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE=2
+# CONFIG_FB_VIRTUAL is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
+CONFIG_FONTS=y
+CONFIG_FONT_8x8=y
+CONFIG_FONT_8x16=y
+# CONFIG_FONT_6x11 is not set
+# CONFIG_FONT_7x14 is not set
+# CONFIG_FONT_PEARL_8x8 is not set
+# CONFIG_FONT_ACORN_8x8 is not set
+# CONFIG_FONT_MINI_4x6 is not set
+# CONFIG_FONT_SUN8x16 is not set
+# CONFIG_FONT_SUN12x22 is not set
+# CONFIG_FONT_10x18 is not set
+CONFIG_LOGO=y
+# CONFIG_LOGO_LINUX_MONO is not set
+# CONFIG_LOGO_LINUX_VGA16 is not set
+CONFIG_LOGO_LINUX_CLUT224=y
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+CONFIG_HID_SUPPORT=y
+# CONFIG_HID is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+# CONFIG_USB is not set
+# CONFIG_USB_MUSB_HDRC is not set
+# CONFIG_USB_GADGET_MUSB_HDRC is not set
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# USB Gadget Support
+#
+CONFIG_USB_GADGET=y
+# CONFIG_USB_GADGET_DEBUG is not set
+# CONFIG_USB_GADGET_DEBUG_FILES is not set
+CONFIG_USB_GADGET_SELECTED=y
+# CONFIG_USB_GADGET_AMD5536UDC is not set
+# CONFIG_USB_GADGET_FSL_USB2 is not set
+# CONFIG_USB_GADGET_NET2280 is not set
+# CONFIG_USB_GADGET_PXA2XX is not set
+# CONFIG_USB_GADGET_M66592 is not set
+# CONFIG_USB_GADGET_GOKU is not set
+# CONFIG_USB_GADGET_LH7A40X is not set
+CONFIG_USB_GADGET_OMAP=y
+CONFIG_USB_OMAP=y
+# CONFIG_USB_GADGET_S3C2410 is not set
+# CONFIG_USB_GADGET_AT91 is not set
+# CONFIG_USB_GADGET_DUMMY_HCD is not set
+# CONFIG_USB_GADGET_DUALSPEED is not set
+# CONFIG_USB_ZERO is not set
+CONFIG_USB_ETH=m
+CONFIG_USB_ETH_RNDIS=y
+# CONFIG_USB_GADGETFS is not set
+CONFIG_USB_FILE_STORAGE=m
+# CONFIG_USB_FILE_STORAGE_TEST is not set
+# CONFIG_USB_G_SERIAL is not set
+# CONFIG_USB_MIDI_GADGET is not set
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+# CONFIG_MMC_UNSAFE_RESUME is not set
+
+#
+# MMC/SD Card Drivers
+#
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_BLOCK_BOUNCE=y
+
+#
+# MMC/SD Host Controller Drivers
+#
+CONFIG_MMC_OMAP=y
+CONFIG_RTC_LIB=y
+# CONFIG_RTC_CLASS is not set
+
+#
+# DMA Engine support
+#
+# CONFIG_DMA_ENGINE is not set
+
+#
+# DMA Clients
+#
+
+#
+# DMA Devices
+#
+
+#
+# CBUS support
+#
+# CONFIG_CBUS is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4DEV_FS is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_INOTIFY is not set
+# CONFIG_QUOTA is not set
+CONFIG_DNOTIFY=y
+# CONFIG_AUTOFS_FS is not set
+CONFIG_AUTOFS4_FS=y
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_RAMFS=y
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_XATTR is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+CONFIG_CRAMFS=y
+# CONFIG_VXFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+
+#
+# Network File Systems
+#
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+# CONFIG_NFS_V4 is not set
+# CONFIG_NFS_DIRECTIO is not set
+# CONFIG_NFSD is not set
+CONFIG_ROOT_NFS=y
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_SUNRPC_BIND34 is not set
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+
+#
+# Native Language Support
+#
+# CONFIG_NLS is not set
+
+#
+# Distributed Lock Manager
+#
+# CONFIG_DLM is not set
+
+#
+# Profiling support
+#
+# CONFIG_PROFILING is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_MUST_CHECK=y
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_SLAB is not set
+CONFIG_DEBUG_PREEMPT=y
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+CONFIG_DEBUG_SPINLOCK=y
+CONFIG_DEBUG_MUTEXES=y
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+CONFIG_DEBUG_SPINLOCK_SLEEP=y
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_LIST is not set
+CONFIG_FRAME_POINTER=y
+CONFIG_FORCED_INLINING=y
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_DEBUG_USER is not set
+# CONFIG_DEBUG_ERRORS is not set
+# CONFIG_DEBUG_LL is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_CRYPTO is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_CRC_CCITT=y
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+CONFIG_LIBCRC32C=y
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/omap_generic_1510_defconfig b/arch/arm/configs/omap_generic_1510_defconfig
new file mode 100644
index 000000000000..4b1c252f2091
--- /dev/null
+++ b/arch/arm/configs/omap_generic_1510_defconfig
@@ -0,0 +1,1172 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.23-rc6-omap1
+# Tue Sep 18 12:20:19 2007
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_MMU=y
+# CONFIG_NO_IOPORT is not set
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_ZONE_DMA=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_AUDIT is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_SYSFS_DEPRECATED=y
+# CONFIG_RELAY is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+# CONFIG_EMBEDDED is not set
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODULE_FORCE_UNLOAD=y
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+
+#
+# System Type
+#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS7500 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_CO285 is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_DAVINCI is not set
+CONFIG_ARCH_OMAP=y
+
+#
+# TI OMAP Implementations
+#
+CONFIG_ARCH_OMAP1=y
+# CONFIG_ARCH_OMAP2 is not set
+# CONFIG_ARCH_OMAP3 is not set
+
+#
+# OMAP Feature Selections
+#
+# CONFIG_OMAP_RESET_CLOCKS is not set
+# CONFIG_OMAP_BOOT_TAG is not set
+# CONFIG_OMAP_GPIO_SWITCH is not set
+CONFIG_OMAP_MUX=y
+# CONFIG_OMAP_MUX_DEBUG is not set
+CONFIG_OMAP_MUX_WARNINGS=y
+CONFIG_OMAP_MCBSP=y
+# CONFIG_OMAP_MMU_FWK is not set
+# CONFIG_OMAP_MBOX_FWK is not set
+CONFIG_OMAP_MPU_TIMER=y
+# CONFIG_OMAP_32K_TIMER is not set
+CONFIG_OMAP_LL_DEBUG_UART1=y
+# CONFIG_OMAP_LL_DEBUG_UART2 is not set
+# CONFIG_OMAP_LL_DEBUG_UART3 is not set
+CONFIG_OMAP_SERIAL_WAKE=y
+# CONFIG_OMAP_DSP is not set
+
+#
+# OMAP Core Type
+#
+# CONFIG_ARCH_OMAP730 is not set
+CONFIG_ARCH_OMAP15XX=y
+# CONFIG_ARCH_OMAP16XX is not set
+
+#
+# OMAP Board Type
+#
+# CONFIG_MACH_OMAP_INNOVATOR is not set
+# CONFIG_MACH_VOICEBLUE is not set
+# CONFIG_MACH_OMAP_PALMTE is not set
+# CONFIG_MACH_OMAP_PALMZ71 is not set
+# CONFIG_MACH_OMAP_PALMTT is not set
+# CONFIG_MACH_SX1 is not set
+# CONFIG_MACH_AMS_DELTA is not set
+CONFIG_MACH_OMAP_GENERIC=y
+
+#
+# OMAP CPU Speed
+#
+# CONFIG_OMAP_CLOCKS_SET_BY_BOOTLOADER is not set
+CONFIG_OMAP_ARM_168MHZ=y
+# CONFIG_OMAP_ARM_150MHZ is not set
+# CONFIG_OMAP_ARM_120MHZ is not set
+# CONFIG_OMAP_ARM_60MHZ is not set
+# CONFIG_OMAP_ARM_30MHZ is not set
+# CONFIG_MACH_OMAP_APOLLON_PLUS is not set
+
+#
+# Boot options
+#
+
+#
+# Power management
+#
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_ARM925T=y
+CONFIG_CPU_32v4T=y
+CONFIG_CPU_ABRT_EV4T=y
+CONFIG_CPU_PABRT_NOIFAR=y
+CONFIG_CPU_CACHE_V4WT=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_COPY_V4WB=y
+CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+# CONFIG_ARM_THUMB is not set
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+CONFIG_CPU_DCACHE_WRITETHROUGH=y
+# CONFIG_OUTER_CACHE is not set
+
+#
+# Bus support
+#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+
+#
+# PCCARD (PCMCIA/CardBus) support
+#
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+# CONFIG_TICK_ONESHOT is not set
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_PREEMPT=y
+CONFIG_HZ=100
+# CONFIG_AEABI is not set
+# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
+# CONFIG_LEDS is not set
+CONFIG_ALIGNMENT_TRAP=y
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="mem=64M console=ttyS2,115200 root=0803 ro init=/bin/sh"
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# CPU Frequency scaling
+#
+# CONFIG_CPU_FREQ is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_FPE_NWFPE=y
+# CONFIG_FPE_NWFPE_XP is not set
+# CONFIG_FPE_FASTFPE is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+# CONFIG_ARTHUR is not set
+
+#
+# Power management options
+#
+CONFIG_PM=y
+# CONFIG_PM_LEGACY is not set
+# CONFIG_PM_DEBUG is not set
+CONFIG_PM_SLEEP=y
+CONFIG_SUSPEND_UP_POSSIBLE=y
+CONFIG_SUSPEND=y
+# CONFIG_APM_EMULATION is not set
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_IP_MROUTE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
+# CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_FW_LOADER is not set
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+# CONFIG_MTD is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=8192
+CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+CONFIG_BLK_DEV_SR=y
+# CONFIG_BLK_DEV_SR_VENDOR is not set
+CONFIG_CHR_DEV_SG=y
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+CONFIG_SCSI_MULTI_LUN=y
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+CONFIG_SCSI_LOWLEVEL=y
+# CONFIG_ISCSI_TCP is not set
+# CONFIG_SCSI_DEBUG is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_PHYLIB is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_AX88796 is not set
+# CONFIG_SMC91X is not set
+# CONFIG_DM9000 is not set
+CONFIG_NETDEV_1000=y
+CONFIG_NETDEV_10000=y
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+CONFIG_USB_RTL8150=y
+CONFIG_USB_USBNET_MII=y
+CONFIG_USB_USBNET=y
+CONFIG_USB_NET_AX8817X=y
+CONFIG_USB_NET_CDCETHER=y
+# CONFIG_USB_NET_DM9601 is not set
+# CONFIG_USB_NET_GL620A is not set
+CONFIG_USB_NET_NET1080=y
+# CONFIG_USB_NET_PLUSB is not set
+# CONFIG_USB_NET_MCS7830 is not set
+# CONFIG_USB_NET_RNDIS_HOST is not set
+CONFIG_USB_NET_CDC_SUBSET=y
+# CONFIG_USB_ALI_M5632 is not set
+CONFIG_USB_AN2720=y
+CONFIG_USB_BELKIN=y
+CONFIG_USB_ARMLINUX=y
+CONFIG_USB_EPSON2888=y
+# CONFIG_USB_KC2190 is not set
+CONFIG_USB_NET_ZAURUS=y
+# CONFIG_WAN is not set
+CONFIG_PPP=y
+CONFIG_PPP_MULTILINK=y
+# CONFIG_PPP_FILTER is not set
+# CONFIG_PPP_ASYNC is not set
+# CONFIG_PPP_SYNC_TTY is not set
+# CONFIG_PPP_DEFLATE is not set
+# CONFIG_PPP_BSDCOMP is not set
+# CONFIG_PPP_MPPE is not set
+# CONFIG_PPPOE is not set
+# CONFIG_PPPOL2TP is not set
+# CONFIG_SLIP is not set
+CONFIG_SLHC=y
+# CONFIG_SHAPER is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+CONFIG_INPUT_MOUSEDEV_PSAUX=y
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_TSDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+CONFIG_KEYBOARD_ATKBD=y
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+CONFIG_KEYBOARD_OMAP=y
+# CONFIG_KEYBOARD_GPIO is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+CONFIG_SERIO_SERPORT=y
+CONFIG_SERIO_LIBPS2=y
+# CONFIG_SERIO_RAW is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_NR_UARTS=4
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
+# CONFIG_SERIAL_8250_EXTENDED is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_HW_RANDOM=m
+# CONFIG_NVRAM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_CHARDEV=y
+
+#
+# I2C Algorithms
+#
+CONFIG_I2C_ALGOBIT=y
+# CONFIG_I2C_ALGOPCF is not set
+# CONFIG_I2C_ALGOPCA is not set
+
+#
+# I2C Hardware Bus support
+#
+# CONFIG_I2C_GPIO is not set
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_OMAP is not set
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_STUB is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_SENSORS_DS1337 is not set
+# CONFIG_SENSORS_DS1374 is not set
+# CONFIG_DS1682 is not set
+# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_TPS65010 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+
+#
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+# CONFIG_W1 is not set
+CONFIG_HWMON=y
+# CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_ABITUGURU is not set
+# CONFIG_SENSORS_ABITUGURU3 is not set
+# CONFIG_SENSORS_AD7418 is not set
+# CONFIG_SENSORS_ADM1021 is not set
+# CONFIG_SENSORS_ADM1025 is not set
+# CONFIG_SENSORS_ADM1026 is not set
+# CONFIG_SENSORS_ADM1029 is not set
+# CONFIG_SENSORS_ADM1031 is not set
+# CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ASB100 is not set
+# CONFIG_SENSORS_ATXP1 is not set
+# CONFIG_SENSORS_DS1621 is not set
+# CONFIG_SENSORS_F71805F is not set
+# CONFIG_SENSORS_FSCHER is not set
+# CONFIG_SENSORS_FSCPOS is not set
+# CONFIG_SENSORS_GL518SM is not set
+# CONFIG_SENSORS_GL520SM is not set
+# CONFIG_SENSORS_IT87 is not set
+# CONFIG_SENSORS_LM63 is not set
+# CONFIG_SENSORS_LM75 is not set
+# CONFIG_SENSORS_LM77 is not set
+# CONFIG_SENSORS_LM78 is not set
+# CONFIG_SENSORS_LM80 is not set
+# CONFIG_SENSORS_LM83 is not set
+# CONFIG_SENSORS_LM85 is not set
+# CONFIG_SENSORS_LM87 is not set
+# CONFIG_SENSORS_LM90 is not set
+# CONFIG_SENSORS_LM92 is not set
+# CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_MAX1619 is not set
+# CONFIG_SENSORS_MAX6650 is not set
+# CONFIG_SENSORS_PC87360 is not set
+# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_DME1737 is not set
+# CONFIG_SENSORS_SMSC47M1 is not set
+# CONFIG_SENSORS_SMSC47M192 is not set
+# CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_THMC50 is not set
+# CONFIG_SENSORS_VT1211 is not set
+# CONFIG_SENSORS_W83781D is not set
+# CONFIG_SENSORS_W83791D is not set
+# CONFIG_SENSORS_W83792D is not set
+# CONFIG_SENSORS_W83793 is not set
+# CONFIG_SENSORS_W83L785TS is not set
+# CONFIG_SENSORS_W83627HF is not set
+# CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_EEPROM_93CX6 is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_SM501 is not set
+# CONFIG_NEW_LEDS is not set
+
+#
+# Multimedia devices
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+CONFIG_DAB=y
+# CONFIG_USB_DABUSB is not set
+
+#
+# Graphics support
+#
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+# CONFIG_VGASTATE is not set
+CONFIG_VIDEO_OUTPUT_CONTROL=m
+# CONFIG_FB is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+# CONFIG_HID_DEBUG is not set
+
+#
+# USB Input Devices
+#
+CONFIG_USB_HID=y
+# CONFIG_USB_HIDINPUT_POWERBOOK is not set
+# CONFIG_HID_FF is not set
+# CONFIG_USB_HIDDEV is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+CONFIG_USB=y
+CONFIG_USB_DEBUG=y
+
+#
+# Miscellaneous USB options
+#
+CONFIG_USB_DEVICEFS=y
+# CONFIG_USB_DEVICE_CLASS is not set
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_SUSPEND is not set
+# CONFIG_USB_PERSIST is not set
+# CONFIG_USB_OTG is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_ISP116X_HCD is not set
+CONFIG_USB_OHCI_HCD=y
+# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_MUSB_HDRC is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# may also be needed; see USB_STORAGE Help for more information
+#
+CONFIG_USB_STORAGE=y
+# CONFIG_USB_STORAGE_DEBUG is not set
+CONFIG_USB_STORAGE_DATAFAB=y
+CONFIG_USB_STORAGE_FREECOM=y
+CONFIG_USB_STORAGE_DPCM=y
+# CONFIG_USB_STORAGE_USBAT is not set
+CONFIG_USB_STORAGE_SDDR09=y
+CONFIG_USB_STORAGE_SDDR55=y
+CONFIG_USB_STORAGE_JUMPSHOT=y
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+CONFIG_USB_MON=y
+
+#
+# USB port drivers
+#
+
+#
+# USB Serial Converter support
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_AUERSWALD is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_PHIDGET is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_TEST is not set
+
+#
+# USB DSL modem support
+#
+
+#
+# USB Gadget Support
+#
+# CONFIG_USB_GADGET is not set
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+# CONFIG_MMC_UNSAFE_RESUME is not set
+
+#
+# MMC/SD Card Drivers
+#
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_BLOCK_BOUNCE=y
+
+#
+# MMC/SD Host Controller Drivers
+#
+CONFIG_MMC_OMAP=y
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+
+#
+# SPI RTC drivers
+#
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+CONFIG_RTC_DRV_OMAP=y
+
+#
+# DMA Engine support
+#
+# CONFIG_DMA_ENGINE is not set
+
+#
+# DMA Clients
+#
+
+#
+# DMA Devices
+#
+
+#
+# CBUS support
+#
+# CONFIG_CBUS is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+CONFIG_EXT3_FS_XATTR=y
+# CONFIG_EXT3_FS_POSIX_ACL is not set
+# CONFIG_EXT3_FS_SECURITY is not set
+# CONFIG_EXT4DEV_FS is not set
+CONFIG_JBD=y
+# CONFIG_JBD_DEBUG is not set
+CONFIG_FS_MBCACHE=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+CONFIG_DNOTIFY=y
+CONFIG_AUTOFS_FS=y
+CONFIG_AUTOFS4_FS=y
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+CONFIG_ISO9660_FS=y
+CONFIG_JOLIET=y
+# CONFIG_ZISOFS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=m
+CONFIG_MSDOS_FS=m
+CONFIG_VFAT_FS=m
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+# CONFIG_TMPFS is not set
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_RAMFS=y
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+
+#
+# Network File Systems
+#
+CONFIG_NFS_FS=y
+# CONFIG_NFS_V3 is not set
+# CONFIG_NFS_V4 is not set
+# CONFIG_NFS_DIRECTIO is not set
+# CONFIG_NFSD is not set
+# CONFIG_ROOT_NFS is not set
+CONFIG_LOCKD=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_SUNRPC_BIND34 is not set
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_BSD_DISKLABEL is not set
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_UNIXWARE_DISKLABEL is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+# CONFIG_SYSV68_PARTITION is not set
+
+#
+# Native Language Support
+#
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+# CONFIG_NLS_CODEPAGE_437 is not set
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+# CONFIG_NLS_ISO8859_1 is not set
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+
+#
+# Distributed Lock Manager
+#
+# CONFIG_DLM is not set
+
+#
+# Profiling support
+#
+# CONFIG_PROFILING is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_SLAB is not set
+CONFIG_DEBUG_PREEMPT=y
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_LIST is not set
+CONFIG_FRAME_POINTER=y
+CONFIG_FORCED_INLINING=y
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_DEBUG_USER is not set
+# CONFIG_DEBUG_ERRORS is not set
+# CONFIG_DEBUG_LL is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_CRYPTO is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/omap_generic_1610_defconfig b/arch/arm/configs/omap_generic_1610_defconfig
new file mode 100644
index 000000000000..fc66f019d56c
--- /dev/null
+++ b/arch/arm/configs/omap_generic_1610_defconfig
@@ -0,0 +1,1178 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.23-rc6-omap1
+# Tue Sep 18 13:01:27 2007
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_MMU=y
+# CONFIG_NO_IOPORT is not set
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_ZONE_DMA=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_AUDIT is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_SYSFS_DEPRECATED=y
+# CONFIG_RELAY is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+# CONFIG_EMBEDDED is not set
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODULE_FORCE_UNLOAD=y
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+
+#
+# System Type
+#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS7500 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_CO285 is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_DAVINCI is not set
+CONFIG_ARCH_OMAP=y
+
+#
+# TI OMAP Implementations
+#
+CONFIG_ARCH_OMAP_OTG=y
+CONFIG_ARCH_OMAP1=y
+# CONFIG_ARCH_OMAP2 is not set
+# CONFIG_ARCH_OMAP3 is not set
+
+#
+# OMAP Feature Selections
+#
+# CONFIG_OMAP_RESET_CLOCKS is not set
+# CONFIG_OMAP_BOOT_TAG is not set
+# CONFIG_OMAP_GPIO_SWITCH is not set
+CONFIG_OMAP_MUX=y
+# CONFIG_OMAP_MUX_DEBUG is not set
+CONFIG_OMAP_MUX_WARNINGS=y
+# CONFIG_OMAP_STI is not set
+CONFIG_OMAP_MCBSP=y
+# CONFIG_OMAP_MMU_FWK is not set
+# CONFIG_OMAP_MBOX_FWK is not set
+CONFIG_OMAP_MPU_TIMER=y
+# CONFIG_OMAP_32K_TIMER is not set
+# CONFIG_OMAP_DM_TIMER is not set
+CONFIG_OMAP_LL_DEBUG_UART1=y
+# CONFIG_OMAP_LL_DEBUG_UART2 is not set
+# CONFIG_OMAP_LL_DEBUG_UART3 is not set
+CONFIG_OMAP_SERIAL_WAKE=y
+# CONFIG_OMAP_DSP is not set
+
+#
+# OMAP Core Type
+#
+# CONFIG_ARCH_OMAP730 is not set
+# CONFIG_ARCH_OMAP15XX is not set
+CONFIG_ARCH_OMAP16XX=y
+
+#
+# OMAP Board Type
+#
+# CONFIG_MACH_OMAP_INNOVATOR is not set
+# CONFIG_MACH_OMAP_H2 is not set
+# CONFIG_MACH_OMAP_H3 is not set
+# CONFIG_MACH_OMAP_OSK is not set
+# CONFIG_MACH_NOKIA770 is not set
+CONFIG_MACH_OMAP_GENERIC=y
+
+#
+# OMAP CPU Speed
+#
+# CONFIG_OMAP_CLOCKS_SET_BY_BOOTLOADER is not set
+# CONFIG_OMAP_ARM_216MHZ is not set
+CONFIG_OMAP_ARM_192MHZ=y
+# CONFIG_OMAP_ARM_168MHZ is not set
+# CONFIG_OMAP_ARM_120MHZ is not set
+# CONFIG_OMAP_ARM_60MHZ is not set
+# CONFIG_OMAP_ARM_30MHZ is not set
+# CONFIG_MACH_OMAP_APOLLON_PLUS is not set
+
+#
+# Boot options
+#
+
+#
+# Power management
+#
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_ARM926T=y
+CONFIG_CPU_32v5=y
+CONFIG_CPU_ABRT_EV5TJ=y
+CONFIG_CPU_PABRT_NOIFAR=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_COPY_V4WB=y
+CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+# CONFIG_ARM_THUMB is not set
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
+# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
+# CONFIG_OUTER_CACHE is not set
+
+#
+# Bus support
+#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+
+#
+# PCCARD (PCMCIA/CardBus) support
+#
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+# CONFIG_TICK_ONESHOT is not set
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_PREEMPT=y
+CONFIG_HZ=100
+# CONFIG_AEABI is not set
+# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
+# CONFIG_LEDS is not set
+CONFIG_ALIGNMENT_TRAP=y
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="mem=64M console=ttyS2,115200 root=0803 ro init=/bin/sh"
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# CPU Frequency scaling
+#
+# CONFIG_CPU_FREQ is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_FPE_NWFPE=y
+# CONFIG_FPE_NWFPE_XP is not set
+# CONFIG_FPE_FASTFPE is not set
+# CONFIG_VFP is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+# CONFIG_ARTHUR is not set
+
+#
+# Power management options
+#
+CONFIG_PM=y
+# CONFIG_PM_LEGACY is not set
+# CONFIG_PM_DEBUG is not set
+CONFIG_PM_SLEEP=y
+CONFIG_SUSPEND_UP_POSSIBLE=y
+CONFIG_SUSPEND=y
+# CONFIG_APM_EMULATION is not set
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_IP_MROUTE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
+# CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_FW_LOADER is not set
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+# CONFIG_MTD is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=8192
+CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+CONFIG_BLK_DEV_SR=y
+# CONFIG_BLK_DEV_SR_VENDOR is not set
+CONFIG_CHR_DEV_SG=y
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+CONFIG_SCSI_MULTI_LUN=y
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+CONFIG_SCSI_LOWLEVEL=y
+# CONFIG_ISCSI_TCP is not set
+# CONFIG_SCSI_DEBUG is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_PHYLIB is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_AX88796 is not set
+# CONFIG_SMC91X is not set
+# CONFIG_DM9000 is not set
+CONFIG_NETDEV_1000=y
+CONFIG_NETDEV_10000=y
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+CONFIG_USB_RTL8150=y
+CONFIG_USB_USBNET_MII=y
+CONFIG_USB_USBNET=y
+CONFIG_USB_NET_AX8817X=y
+CONFIG_USB_NET_CDCETHER=y
+# CONFIG_USB_NET_DM9601 is not set
+# CONFIG_USB_NET_GL620A is not set
+CONFIG_USB_NET_NET1080=y
+# CONFIG_USB_NET_PLUSB is not set
+# CONFIG_USB_NET_MCS7830 is not set
+# CONFIG_USB_NET_RNDIS_HOST is not set
+CONFIG_USB_NET_CDC_SUBSET=y
+CONFIG_USB_ALI_M5632=y
+CONFIG_USB_AN2720=y
+CONFIG_USB_BELKIN=y
+CONFIG_USB_ARMLINUX=y
+CONFIG_USB_EPSON2888=y
+# CONFIG_USB_KC2190 is not set
+CONFIG_USB_NET_ZAURUS=y
+# CONFIG_WAN is not set
+CONFIG_PPP=y
+CONFIG_PPP_MULTILINK=y
+# CONFIG_PPP_FILTER is not set
+# CONFIG_PPP_ASYNC is not set
+# CONFIG_PPP_SYNC_TTY is not set
+# CONFIG_PPP_DEFLATE is not set
+# CONFIG_PPP_BSDCOMP is not set
+# CONFIG_PPP_MPPE is not set
+# CONFIG_PPPOE is not set
+# CONFIG_PPPOL2TP is not set
+# CONFIG_SLIP is not set
+CONFIG_SLHC=y
+# CONFIG_SHAPER is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+CONFIG_INPUT_MOUSEDEV_PSAUX=y
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_TSDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+CONFIG_KEYBOARD_ATKBD=y
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+CONFIG_KEYBOARD_OMAP=y
+# CONFIG_KEYBOARD_GPIO is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+CONFIG_SERIO_SERPORT=y
+CONFIG_SERIO_LIBPS2=y
+# CONFIG_SERIO_RAW is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_NR_UARTS=4
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
+# CONFIG_SERIAL_8250_EXTENDED is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_HW_RANDOM=m
+CONFIG_HW_RANDOM_OMAP=m
+# CONFIG_NVRAM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_CHARDEV=y
+
+#
+# I2C Algorithms
+#
+CONFIG_I2C_ALGOBIT=y
+# CONFIG_I2C_ALGOPCF is not set
+# CONFIG_I2C_ALGOPCA is not set
+
+#
+# I2C Hardware Bus support
+#
+# CONFIG_I2C_GPIO is not set
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_OMAP is not set
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_STUB is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_SENSORS_DS1337 is not set
+# CONFIG_SENSORS_DS1374 is not set
+# CONFIG_DS1682 is not set
+# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_ISP1301_OMAP is not set
+# CONFIG_TPS65010 is not set
+# CONFIG_GPIOEXPANDER_OMAP is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+
+#
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+# CONFIG_W1 is not set
+CONFIG_HWMON=y
+# CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_ABITUGURU is not set
+# CONFIG_SENSORS_ABITUGURU3 is not set
+# CONFIG_SENSORS_AD7418 is not set
+# CONFIG_SENSORS_ADM1021 is not set
+# CONFIG_SENSORS_ADM1025 is not set
+# CONFIG_SENSORS_ADM1026 is not set
+# CONFIG_SENSORS_ADM1029 is not set
+# CONFIG_SENSORS_ADM1031 is not set
+# CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ASB100 is not set
+# CONFIG_SENSORS_ATXP1 is not set
+# CONFIG_SENSORS_DS1621 is not set
+# CONFIG_SENSORS_F71805F is not set
+# CONFIG_SENSORS_FSCHER is not set
+# CONFIG_SENSORS_FSCPOS is not set
+# CONFIG_SENSORS_GL518SM is not set
+# CONFIG_SENSORS_GL520SM is not set
+# CONFIG_SENSORS_IT87 is not set
+# CONFIG_SENSORS_LM63 is not set
+# CONFIG_SENSORS_LM75 is not set
+# CONFIG_SENSORS_LM77 is not set
+# CONFIG_SENSORS_LM78 is not set
+# CONFIG_SENSORS_LM80 is not set
+# CONFIG_SENSORS_LM83 is not set
+# CONFIG_SENSORS_LM85 is not set
+# CONFIG_SENSORS_LM87 is not set
+# CONFIG_SENSORS_LM90 is not set
+# CONFIG_SENSORS_LM92 is not set
+# CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_MAX1619 is not set
+# CONFIG_SENSORS_MAX6650 is not set
+# CONFIG_SENSORS_PC87360 is not set
+# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_DME1737 is not set
+# CONFIG_SENSORS_SMSC47M1 is not set
+# CONFIG_SENSORS_SMSC47M192 is not set
+# CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_THMC50 is not set
+# CONFIG_SENSORS_VT1211 is not set
+# CONFIG_SENSORS_W83781D is not set
+# CONFIG_SENSORS_W83791D is not set
+# CONFIG_SENSORS_W83792D is not set
+# CONFIG_SENSORS_W83793 is not set
+# CONFIG_SENSORS_W83L785TS is not set
+# CONFIG_SENSORS_W83627HF is not set
+# CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_EEPROM_93CX6 is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_SM501 is not set
+# CONFIG_NEW_LEDS is not set
+
+#
+# Multimedia devices
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+CONFIG_DAB=y
+# CONFIG_USB_DABUSB is not set
+
+#
+# Graphics support
+#
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+# CONFIG_VGASTATE is not set
+CONFIG_VIDEO_OUTPUT_CONTROL=m
+# CONFIG_FB is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+# CONFIG_HID_DEBUG is not set
+
+#
+# USB Input Devices
+#
+CONFIG_USB_HID=y
+# CONFIG_USB_HIDINPUT_POWERBOOK is not set
+# CONFIG_HID_FF is not set
+# CONFIG_USB_HIDDEV is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+CONFIG_USB=y
+CONFIG_USB_DEBUG=y
+
+#
+# Miscellaneous USB options
+#
+CONFIG_USB_DEVICEFS=y
+# CONFIG_USB_DEVICE_CLASS is not set
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_SUSPEND is not set
+# CONFIG_USB_PERSIST is not set
+# CONFIG_USB_OTG is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_ISP116X_HCD is not set
+CONFIG_USB_OHCI_HCD=y
+# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_MUSB_HDRC is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# may also be needed; see USB_STORAGE Help for more information
+#
+CONFIG_USB_STORAGE=y
+# CONFIG_USB_STORAGE_DEBUG is not set
+CONFIG_USB_STORAGE_DATAFAB=y
+CONFIG_USB_STORAGE_FREECOM=y
+CONFIG_USB_STORAGE_DPCM=y
+# CONFIG_USB_STORAGE_USBAT is not set
+CONFIG_USB_STORAGE_SDDR09=y
+CONFIG_USB_STORAGE_SDDR55=y
+CONFIG_USB_STORAGE_JUMPSHOT=y
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+CONFIG_USB_MON=y
+
+#
+# USB port drivers
+#
+
+#
+# USB Serial Converter support
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_AUERSWALD is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_PHIDGET is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_TEST is not set
+
+#
+# USB DSL modem support
+#
+
+#
+# USB Gadget Support
+#
+# CONFIG_USB_GADGET is not set
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+# CONFIG_MMC_UNSAFE_RESUME is not set
+
+#
+# MMC/SD Card Drivers
+#
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_BLOCK_BOUNCE=y
+
+#
+# MMC/SD Host Controller Drivers
+#
+CONFIG_MMC_OMAP=y
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+
+#
+# SPI RTC drivers
+#
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+CONFIG_RTC_DRV_OMAP=y
+
+#
+# DMA Engine support
+#
+# CONFIG_DMA_ENGINE is not set
+
+#
+# DMA Clients
+#
+
+#
+# DMA Devices
+#
+
+#
+# CBUS support
+#
+# CONFIG_CBUS is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+CONFIG_EXT3_FS_XATTR=y
+# CONFIG_EXT3_FS_POSIX_ACL is not set
+# CONFIG_EXT3_FS_SECURITY is not set
+# CONFIG_EXT4DEV_FS is not set
+CONFIG_JBD=y
+# CONFIG_JBD_DEBUG is not set
+CONFIG_FS_MBCACHE=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+CONFIG_DNOTIFY=y
+CONFIG_AUTOFS_FS=y
+CONFIG_AUTOFS4_FS=y
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+CONFIG_ISO9660_FS=y
+CONFIG_JOLIET=y
+# CONFIG_ZISOFS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=m
+CONFIG_MSDOS_FS=m
+CONFIG_VFAT_FS=m
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+# CONFIG_TMPFS is not set
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_RAMFS=y
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+
+#
+# Network File Systems
+#
+CONFIG_NFS_FS=y
+# CONFIG_NFS_V3 is not set
+# CONFIG_NFS_V4 is not set
+# CONFIG_NFS_DIRECTIO is not set
+# CONFIG_NFSD is not set
+# CONFIG_ROOT_NFS is not set
+CONFIG_LOCKD=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_SUNRPC_BIND34 is not set
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_BSD_DISKLABEL is not set
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_UNIXWARE_DISKLABEL is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+# CONFIG_SYSV68_PARTITION is not set
+
+#
+# Native Language Support
+#
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+# CONFIG_NLS_CODEPAGE_437 is not set
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+# CONFIG_NLS_ISO8859_1 is not set
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+
+#
+# Distributed Lock Manager
+#
+# CONFIG_DLM is not set
+
+#
+# Profiling support
+#
+# CONFIG_PROFILING is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_SLAB is not set
+CONFIG_DEBUG_PREEMPT=y
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_LIST is not set
+CONFIG_FRAME_POINTER=y
+CONFIG_FORCED_INLINING=y
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_DEBUG_USER is not set
+# CONFIG_DEBUG_ERRORS is not set
+# CONFIG_DEBUG_LL is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_CRYPTO is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/omap_generic_1710_defconfig b/arch/arm/configs/omap_generic_1710_defconfig
new file mode 100644
index 000000000000..0a00a708a4fc
--- /dev/null
+++ b/arch/arm/configs/omap_generic_1710_defconfig
@@ -0,0 +1,1088 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.23-rc6-omap1
+# Tue Sep 18 13:02:08 2007
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_MMU=y
+# CONFIG_NO_IOPORT is not set
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_ZONE_DMA=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_AUDIT is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_SYSFS_DEPRECATED=y
+# CONFIG_RELAY is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+# CONFIG_EMBEDDED is not set
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLUB_DEBUG=y
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
+# CONFIG_SLOB is not set
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+# CONFIG_MODULES is not set
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+
+#
+# System Type
+#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS7500 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_CO285 is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_DAVINCI is not set
+CONFIG_ARCH_OMAP=y
+
+#
+# TI OMAP Implementations
+#
+CONFIG_ARCH_OMAP_OTG=y
+CONFIG_ARCH_OMAP1=y
+# CONFIG_ARCH_OMAP2 is not set
+# CONFIG_ARCH_OMAP3 is not set
+
+#
+# OMAP Feature Selections
+#
+# CONFIG_OMAP_RESET_CLOCKS is not set
+CONFIG_OMAP_BOOT_TAG=y
+# CONFIG_OMAP_BOOT_REASON is not set
+# CONFIG_OMAP_COMPONENT_VERSION is not set
+# CONFIG_OMAP_GPIO_SWITCH is not set
+# CONFIG_OMAP_MUX is not set
+# CONFIG_OMAP_STI is not set
+CONFIG_OMAP_MCBSP=y
+# CONFIG_OMAP_MMU_FWK is not set
+# CONFIG_OMAP_MBOX_FWK is not set
+CONFIG_OMAP_MPU_TIMER=y
+# CONFIG_OMAP_32K_TIMER is not set
+# CONFIG_OMAP_DM_TIMER is not set
+# CONFIG_OMAP_LL_DEBUG_UART1 is not set
+# CONFIG_OMAP_LL_DEBUG_UART2 is not set
+CONFIG_OMAP_LL_DEBUG_UART3=y
+# CONFIG_OMAP_DSP is not set
+
+#
+# OMAP Core Type
+#
+# CONFIG_ARCH_OMAP730 is not set
+# CONFIG_ARCH_OMAP15XX is not set
+CONFIG_ARCH_OMAP16XX=y
+
+#
+# OMAP Board Type
+#
+# CONFIG_MACH_OMAP_INNOVATOR is not set
+# CONFIG_MACH_OMAP_H2 is not set
+# CONFIG_MACH_OMAP_H3 is not set
+# CONFIG_MACH_OMAP_OSK is not set
+# CONFIG_MACH_NOKIA770 is not set
+CONFIG_MACH_OMAP_GENERIC=y
+
+#
+# OMAP CPU Speed
+#
+# CONFIG_OMAP_CLOCKS_SET_BY_BOOTLOADER is not set
+# CONFIG_OMAP_ARM_216MHZ is not set
+CONFIG_OMAP_ARM_192MHZ=y
+# CONFIG_OMAP_ARM_168MHZ is not set
+# CONFIG_OMAP_ARM_120MHZ is not set
+# CONFIG_OMAP_ARM_60MHZ is not set
+# CONFIG_OMAP_ARM_30MHZ is not set
+# CONFIG_MACH_OMAP_APOLLON_PLUS is not set
+
+#
+# Boot options
+#
+
+#
+# Power management
+#
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_ARM926T=y
+CONFIG_CPU_32v5=y
+CONFIG_CPU_ABRT_EV5TJ=y
+CONFIG_CPU_PABRT_NOIFAR=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_COPY_V4WB=y
+CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+# CONFIG_ARM_THUMB is not set
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
+# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
+# CONFIG_OUTER_CACHE is not set
+
+#
+# Bus support
+#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+
+#
+# PCCARD (PCMCIA/CardBus) support
+#
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+# CONFIG_TICK_ONESHOT is not set
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+# CONFIG_PREEMPT is not set
+CONFIG_HZ=100
+# CONFIG_AEABI is not set
+# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
+# CONFIG_LEDS is not set
+CONFIG_ALIGNMENT_TRAP=y
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="mem=64M console=tty0 console=ttyS2,115200 root=0801"
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# CPU Frequency scaling
+#
+# CONFIG_CPU_FREQ is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_FPE_NWFPE=y
+# CONFIG_FPE_NWFPE_XP is not set
+# CONFIG_FPE_FASTFPE is not set
+# CONFIG_VFP is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+CONFIG_ARTHUR=y
+
+#
+# Power management options
+#
+CONFIG_PM=y
+# CONFIG_PM_LEGACY is not set
+# CONFIG_PM_DEBUG is not set
+CONFIG_PM_SLEEP=y
+CONFIG_SUSPEND_UP_POSSIBLE=y
+CONFIG_SUSPEND=y
+# CONFIG_APM_EMULATION is not set
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_IP_MROUTE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
+# CONFIG_NETLABEL is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
+# CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_FW_LOADER is not set
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+# CONFIG_MTD is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=8192
+CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+# CONFIG_SCSI_MULTI_LUN is not set
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+CONFIG_SCSI_LOWLEVEL=y
+# CONFIG_ISCSI_TCP is not set
+# CONFIG_SCSI_DEBUG is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_PHYLIB is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_AX88796 is not set
+# CONFIG_SMC91X is not set
+# CONFIG_DM9000 is not set
+CONFIG_NETDEV_1000=y
+CONFIG_NETDEV_10000=y
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+CONFIG_USB_USBNET_MII=y
+CONFIG_USB_USBNET=y
+CONFIG_USB_NET_AX8817X=y
+CONFIG_USB_NET_CDCETHER=y
+# CONFIG_USB_NET_DM9601 is not set
+# CONFIG_USB_NET_GL620A is not set
+CONFIG_USB_NET_NET1080=y
+# CONFIG_USB_NET_PLUSB is not set
+# CONFIG_USB_NET_MCS7830 is not set
+# CONFIG_USB_NET_RNDIS_HOST is not set
+CONFIG_USB_NET_CDC_SUBSET=y
+CONFIG_USB_ALI_M5632=y
+# CONFIG_USB_AN2720 is not set
+# CONFIG_USB_BELKIN is not set
+# CONFIG_USB_ARMLINUX is not set
+# CONFIG_USB_EPSON2888 is not set
+# CONFIG_USB_KC2190 is not set
+CONFIG_USB_NET_ZAURUS=y
+# CONFIG_WAN is not set
+CONFIG_PPP=y
+# CONFIG_PPP_MULTILINK is not set
+# CONFIG_PPP_FILTER is not set
+# CONFIG_PPP_ASYNC is not set
+# CONFIG_PPP_SYNC_TTY is not set
+# CONFIG_PPP_DEFLATE is not set
+# CONFIG_PPP_BSDCOMP is not set
+# CONFIG_PPP_MPPE is not set
+# CONFIG_PPPOE is not set
+# CONFIG_PPPOL2TP is not set
+# CONFIG_SLIP is not set
+CONFIG_SLHC=y
+# CONFIG_SHAPER is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+CONFIG_INPUT_MOUSEDEV_PSAUX=y
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_TSDEV is not set
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+CONFIG_KEYBOARD_ATKBD=y
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+CONFIG_KEYBOARD_OMAP=y
+# CONFIG_KEYBOARD_GPIO is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+CONFIG_SERIO_SERPORT=y
+CONFIG_SERIO_LIBPS2=y
+# CONFIG_SERIO_RAW is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_NR_UARTS=4
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
+# CONFIG_SERIAL_8250_EXTENDED is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_HW_RANDOM=y
+CONFIG_HW_RANDOM_OMAP=y
+# CONFIG_NVRAM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+# CONFIG_I2C is not set
+
+#
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+# CONFIG_W1 is not set
+CONFIG_HWMON=y
+# CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_ABITUGURU is not set
+# CONFIG_SENSORS_ABITUGURU3 is not set
+# CONFIG_SENSORS_F71805F is not set
+# CONFIG_SENSORS_IT87 is not set
+# CONFIG_SENSORS_PC87360 is not set
+# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_SMSC47M1 is not set
+# CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_VT1211 is not set
+# CONFIG_SENSORS_W83627HF is not set
+# CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_EEPROM_93CX6 is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_SM501 is not set
+# CONFIG_NEW_LEDS is not set
+
+#
+# Multimedia devices
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+CONFIG_DAB=y
+# CONFIG_USB_DABUSB is not set
+
+#
+# Graphics support
+#
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+# CONFIG_VGASTATE is not set
+CONFIG_VIDEO_OUTPUT_CONTROL=y
+# CONFIG_FB is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+CONFIG_HID_DEBUG=y
+
+#
+# USB Input Devices
+#
+CONFIG_USB_HID=y
+# CONFIG_USB_HIDINPUT_POWERBOOK is not set
+# CONFIG_HID_FF is not set
+# CONFIG_USB_HIDDEV is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+CONFIG_USB=y
+CONFIG_USB_DEBUG=y
+
+#
+# Miscellaneous USB options
+#
+CONFIG_USB_DEVICEFS=y
+CONFIG_USB_DEVICE_CLASS=y
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_SUSPEND is not set
+# CONFIG_USB_PERSIST is not set
+# CONFIG_USB_OTG is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_ISP116X_HCD is not set
+CONFIG_USB_OHCI_HCD=y
+# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_MUSB_HDRC is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# may also be needed; see USB_STORAGE Help for more information
+#
+CONFIG_USB_STORAGE=y
+# CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_DPCM is not set
+# CONFIG_USB_STORAGE_USBAT is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+CONFIG_USB_MON=y
+
+#
+# USB port drivers
+#
+
+#
+# USB Serial Converter support
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_AUERSWALD is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_PHIDGET is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_TEST is not set
+
+#
+# USB DSL modem support
+#
+
+#
+# USB Gadget Support
+#
+# CONFIG_USB_GADGET is not set
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+# CONFIG_MMC_UNSAFE_RESUME is not set
+
+#
+# MMC/SD Card Drivers
+#
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_BLOCK_BOUNCE=y
+
+#
+# MMC/SD Host Controller Drivers
+#
+CONFIG_MMC_OMAP=y
+CONFIG_RTC_LIB=y
+# CONFIG_RTC_CLASS is not set
+
+#
+# DMA Engine support
+#
+# CONFIG_DMA_ENGINE is not set
+
+#
+# DMA Clients
+#
+
+#
+# DMA Devices
+#
+
+#
+# CBUS support
+#
+# CONFIG_CBUS is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+CONFIG_EXT3_FS_XATTR=y
+# CONFIG_EXT3_FS_POSIX_ACL is not set
+# CONFIG_EXT3_FS_SECURITY is not set
+# CONFIG_EXT4DEV_FS is not set
+CONFIG_JBD=y
+# CONFIG_JBD_DEBUG is not set
+CONFIG_FS_MBCACHE=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+CONFIG_DNOTIFY=y
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_RAMFS=y
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+
+#
+# Network File Systems
+#
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+CONFIG_NFS_V4=y
+# CONFIG_NFS_DIRECTIO is not set
+# CONFIG_NFSD is not set
+# CONFIG_ROOT_NFS is not set
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+CONFIG_SUNRPC_GSS=y
+# CONFIG_SUNRPC_BIND34 is not set
+CONFIG_RPCSEC_GSS_KRB5=y
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_BSD_DISKLABEL is not set
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_UNIXWARE_DISKLABEL is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+# CONFIG_SYSV68_PARTITION is not set
+
+#
+# Native Language Support
+#
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+CONFIG_NLS_CODEPAGE_852=y
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+CONFIG_NLS_ISO8859_1=y
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+CONFIG_NLS_ISO8859_15=y
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+
+#
+# Distributed Lock Manager
+#
+# CONFIG_DLM is not set
+
+#
+# Profiling support
+#
+# CONFIG_PROFILING is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+CONFIG_DEBUG_SPINLOCK=y
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_LIST is not set
+CONFIG_FRAME_POINTER=y
+CONFIG_FORCED_INLINING=y
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_DEBUG_USER is not set
+CONFIG_DEBUG_ERRORS=y
+# CONFIG_DEBUG_LL is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+CONFIG_SECURITY=y
+# CONFIG_SECURITY_NETWORK is not set
+CONFIG_SECURITY_CAPABILITIES=y
+# CONFIG_SECURITY_ROOTPLUG is not set
+# CONFIG_SECURITY_LOWMEM is not set
+CONFIG_CRYPTO=y
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_MANAGER=y
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_MD4 is not set
+CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_WP512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+CONFIG_CRYPTO_ECB=y
+CONFIG_CRYPTO_CBC=y
+CONFIG_CRYPTO_PCBC=y
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+CONFIG_CRYPTO_HW=y
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/omap_generic_2420_defconfig b/arch/arm/configs/omap_generic_2420_defconfig
new file mode 100644
index 000000000000..cf4073b47aaa
--- /dev/null
+++ b/arch/arm/configs/omap_generic_2420_defconfig
@@ -0,0 +1,655 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.23-rc6-omap1
+# Tue Sep 18 11:44:48 2007
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_MMU=y
+# CONFIG_NO_IOPORT is not set
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_ZONE_DMA=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_USER_NS is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_SYSFS_DEPRECATED=y
+# CONFIG_RELAY is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+# CONFIG_EMBEDDED is not set
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLUB_DEBUG=y
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
+# CONFIG_SLOB is not set
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+# CONFIG_KMOD is not set
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+
+#
+# System Type
+#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS7500 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_CO285 is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_DAVINCI is not set
+CONFIG_ARCH_OMAP=y
+
+#
+# TI OMAP Implementations
+#
+CONFIG_ARCH_OMAP_OTG=y
+# CONFIG_ARCH_OMAP1 is not set
+CONFIG_ARCH_OMAP2=y
+# CONFIG_ARCH_OMAP3 is not set
+
+#
+# OMAP Feature Selections
+#
+# CONFIG_OMAP_RESET_CLOCKS is not set
+CONFIG_OMAP_BOOT_TAG=y
+# CONFIG_OMAP_BOOT_REASON is not set
+# CONFIG_OMAP_COMPONENT_VERSION is not set
+# CONFIG_OMAP_GPIO_SWITCH is not set
+# CONFIG_OMAP_MUX is not set
+# CONFIG_OMAP_STI is not set
+CONFIG_OMAP_MCBSP=y
+# CONFIG_OMAP_MMU_FWK is not set
+# CONFIG_OMAP_MBOX_FWK is not set
+CONFIG_OMAP_MPU_TIMER=y
+# CONFIG_OMAP_32K_TIMER is not set
+CONFIG_OMAP_DM_TIMER=y
+# CONFIG_OMAP_LL_DEBUG_UART1 is not set
+# CONFIG_OMAP_LL_DEBUG_UART2 is not set
+CONFIG_OMAP_LL_DEBUG_UART3=y
+# CONFIG_OMAP_DSP is not set
+CONFIG_MACH_OMAP_GENERIC=y
+
+#
+# OMAP Core Type
+#
+CONFIG_ARCH_OMAP24XX=y
+CONFIG_ARCH_OMAP2420=y
+# CONFIG_ARCH_OMAP2430 is not set
+
+#
+# OMAP Board Type
+#
+# CONFIG_MACH_NOKIA_N800 is not set
+# CONFIG_MACH_OMAP_H4 is not set
+# CONFIG_MACH_OMAP_APOLLON is not set
+# CONFIG_MACH_OMAP_APOLLON_PLUS is not set
+# CONFIG_MACH_OMAP_2430SDP is not set
+
+#
+# Boot options
+#
+
+#
+# Power management
+#
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_V6=y
+# CONFIG_CPU_32v6K is not set
+CONFIG_CPU_32v6=y
+CONFIG_CPU_ABRT_EV6=y
+CONFIG_CPU_PABRT_NOIFAR=y
+CONFIG_CPU_CACHE_V6=y
+CONFIG_CPU_CACHE_VIPT=y
+CONFIG_CPU_COPY_V6=y
+CONFIG_CPU_TLB_V6=y
+CONFIG_CPU_HAS_ASID=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_BPREDICT_DISABLE is not set
+# CONFIG_OUTER_CACHE is not set
+
+#
+# Bus support
+#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+
+#
+# PCCARD (PCMCIA/CardBus) support
+#
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+# CONFIG_TICK_ONESHOT is not set
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+# CONFIG_PREEMPT is not set
+CONFIG_HZ=100
+# CONFIG_AEABI is not set
+# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
+CONFIG_LEDS=y
+CONFIG_ALIGNMENT_TRAP=y
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x10C08000
+CONFIG_ZBOOT_ROM_BSS=0x10200000
+# CONFIG_ZBOOT_ROM is not set
+CONFIG_CMDLINE=""
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# CPU Frequency scaling
+#
+# CONFIG_CPU_FREQ is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_FPE_NWFPE=y
+# CONFIG_FPE_NWFPE_XP is not set
+# CONFIG_FPE_FASTFPE is not set
+# CONFIG_VFP is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+# CONFIG_ARTHUR is not set
+
+#
+# Power management options
+#
+# CONFIG_PM is not set
+CONFIG_SUSPEND_UP_POSSIBLE=y
+
+#
+# Networking
+#
+# CONFIG_NET is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_MTD is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+# CONFIG_BLK_DEV_LOOP is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=4096
+CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_CDROM_PKTCDVD is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+CONFIG_INPUT_MOUSEDEV_PSAUX=y
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_TSDEV is not set
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+CONFIG_SERIO_SERPORT=y
+# CONFIG_SERIO_RAW is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_NR_UARTS=4
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
+# CONFIG_SERIAL_8250_EXTENDED is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_IPMI_HANDLER is not set
+CONFIG_WATCHDOG=y
+CONFIG_WATCHDOG_NOWAYOUT=y
+
+#
+# Watchdog Device Drivers
+#
+# CONFIG_SOFT_WATCHDOG is not set
+# CONFIG_OMAP_WATCHDOG is not set
+CONFIG_HW_RANDOM=m
+CONFIG_HW_RANDOM_OMAP=m
+# CONFIG_NVRAM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+# CONFIG_I2C is not set
+
+#
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+# CONFIG_W1 is not set
+CONFIG_HWMON=y
+# CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_ABITUGURU is not set
+# CONFIG_SENSORS_ABITUGURU3 is not set
+# CONFIG_SENSORS_F71805F is not set
+# CONFIG_SENSORS_IT87 is not set
+# CONFIG_SENSORS_PC87360 is not set
+# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_SMSC47M1 is not set
+# CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_VT1211 is not set
+# CONFIG_SENSORS_W83627HF is not set
+# CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_EEPROM_93CX6 is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_SM501 is not set
+# CONFIG_NEW_LEDS is not set
+
+#
+# Multimedia devices
+#
+# CONFIG_VIDEO_DEV is not set
+CONFIG_DAB=y
+
+#
+# Graphics support
+#
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+# CONFIG_VGASTATE is not set
+CONFIG_VIDEO_OUTPUT_CONTROL=m
+# CONFIG_FB is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+CONFIG_HID_DEBUG=y
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+# CONFIG_USB is not set
+
+#
+# Enable Host or Gadget support to see Inventra options
+#
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# USB Gadget Support
+#
+# CONFIG_USB_GADGET is not set
+# CONFIG_MMC is not set
+CONFIG_RTC_LIB=y
+# CONFIG_RTC_CLASS is not set
+
+#
+# DMA Engine support
+#
+# CONFIG_DMA_ENGINE is not set
+
+#
+# DMA Clients
+#
+
+#
+# DMA Devices
+#
+
+#
+# CBUS support
+#
+# CONFIG_CBUS is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+CONFIG_EXT2_FS_XATTR=y
+# CONFIG_EXT2_FS_POSIX_ACL is not set
+# CONFIG_EXT2_FS_SECURITY is not set
+# CONFIG_EXT2_FS_XIP is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4DEV_FS is not set
+CONFIG_FS_MBCACHE=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_MINIX_FS is not set
+CONFIG_ROMFS_FS=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+CONFIG_DNOTIFY=y
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+# CONFIG_TMPFS is not set
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_RAMFS=y
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+
+#
+# Native Language Support
+#
+# CONFIG_NLS is not set
+
+#
+# Profiling support
+#
+# CONFIG_PROFILING is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_MUST_CHECK=y
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_INFO=y
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_LIST is not set
+CONFIG_FRAME_POINTER=y
+CONFIG_FORCED_INLINING=y
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_FAULT_INJECTION is not set
+CONFIG_DEBUG_USER=y
+CONFIG_DEBUG_ERRORS=y
+CONFIG_DEBUG_LL=y
+# CONFIG_DEBUG_ICEDCC is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_CRYPTO is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_CRC_CCITT=y
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/omap_h2_1610_defconfig b/arch/arm/configs/omap_h2_1610_defconfig
index 323c1deeb953..c03507202f3c 100644
--- a/arch/arm/configs/omap_h2_1610_defconfig
+++ b/arch/arm/configs/omap_h2_1610_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.25-rc3
-# Mon Mar  3 03:39:48 2008
+# Linux kernel version: 2.6.25-rc2-omap1
+# Wed Feb 20 17:12:36 2008
 #
 CONFIG_ARM=y
 CONFIG_SYS_SUPPORTS_APM_EMULATION=y
@@ -31,7 +31,6 @@ CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 #
 CONFIG_EXPERIMENTAL=y
 CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
 CONFIG_INIT_ENV_ARG_LIMIT=32
 CONFIG_LOCALVERSION=""
 CONFIG_LOCALVERSION_AUTO=y
@@ -50,7 +49,7 @@ CONFIG_FAIR_GROUP_SCHED=y
 # CONFIG_RT_GROUP_SCHED is not set
 CONFIG_USER_SCHED=y
 # CONFIG_CGROUP_SCHED is not set
-# CONFIG_SYSFS_DEPRECATED is not set
+CONFIG_SYSFS_DEPRECATED=y
 # CONFIG_RELAY is not set
 CONFIG_NAMESPACES=y
 # CONFIG_UTS_NS is not set
@@ -65,6 +64,7 @@ CONFIG_SYSCTL=y
 CONFIG_UID16=y
 CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
@@ -165,20 +165,28 @@ CONFIG_ARCH_OMAP=y
 CONFIG_ARCH_OMAP_OTG=y
 CONFIG_ARCH_OMAP1=y
 # CONFIG_ARCH_OMAP2 is not set
+# CONFIG_ARCH_OMAP3 is not set
 
 #
 # OMAP Feature Selections
 #
+CONFIG_OMAP_DEBUG_SRAM_PATCH=y
 # CONFIG_OMAP_RESET_CLOCKS is not set
+CONFIG_OMAP_BOOT_TAG=y
+# CONFIG_OMAP_BOOT_REASON is not set
+# CONFIG_OMAP_COMPONENT_VERSION is not set
+CONFIG_OMAP_GPIO_SWITCH=y
 CONFIG_OMAP_MUX=y
-# CONFIG_OMAP_MUX_DEBUG is not set
+CONFIG_OMAP_MUX_DEBUG=y
 CONFIG_OMAP_MUX_WARNINGS=y
+# CONFIG_OMAP_STI is not set
 CONFIG_OMAP_MCBSP=y
 # CONFIG_OMAP_MMU_FWK is not set
+# CONFIG_OMAP_MBOX_FWK is not set
 # CONFIG_OMAP_MPU_TIMER is not set
 CONFIG_OMAP_32K_TIMER=y
 CONFIG_OMAP_32K_TIMER_HZ=128
-# CONFIG_OMAP_DM_TIMER is not set
+CONFIG_OMAP_DM_TIMER=y
 CONFIG_OMAP_LL_DEBUG_UART1=y
 # CONFIG_OMAP_LL_DEBUG_UART2 is not set
 # CONFIG_OMAP_LL_DEBUG_UART3 is not set
@@ -206,10 +214,10 @@ CONFIG_MACH_OMAP_H2=y
 #
 # CONFIG_OMAP_CLOCKS_SET_BY_BOOTLOADER is not set
 # CONFIG_OMAP_ARM_216MHZ is not set
-CONFIG_OMAP_ARM_192MHZ=y
+# CONFIG_OMAP_ARM_192MHZ is not set
 # CONFIG_OMAP_ARM_168MHZ is not set
 # CONFIG_OMAP_ARM_120MHZ is not set
-# CONFIG_OMAP_ARM_60MHZ is not set
+CONFIG_OMAP_ARM_60MHZ=y
 # CONFIG_OMAP_ARM_30MHZ is not set
 
 #
@@ -227,6 +235,7 @@ CONFIG_CPU_32=y
 CONFIG_CPU_ARM926T=y
 CONFIG_CPU_32v5=y
 CONFIG_CPU_ABRT_EV5TJ=y
+CONFIG_CPU_PABRT_NOIFAR=y
 CONFIG_CPU_CACHE_VIVT=y
 CONFIG_CPU_COPY_V4WB=y
 CONFIG_CPU_TLB_V4WBI=y
@@ -257,10 +266,9 @@ CONFIG_TICK_ONESHOT=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
 CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_PREEMPT=y
+# CONFIG_PREEMPT is not set
 CONFIG_HZ=128
-CONFIG_AEABI=y
-CONFIG_OABI_COMPAT=y
+# CONFIG_AEABI is not set
 # CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
 CONFIG_SELECT_MEMORY_MODEL=y
 CONFIG_FLATMEM_MANUAL=y
@@ -275,7 +283,8 @@ CONFIG_SPLIT_PTLOCK_CPUS=4096
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
-# CONFIG_LEDS is not set
+CONFIG_LEDS=y
+# CONFIG_LEDS_CPU is not set
 CONFIG_ALIGNMENT_TRAP=y
 
 #
@@ -283,7 +292,7 @@ CONFIG_ALIGNMENT_TRAP=y
 #
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="mem=32M console=ttyS0,115200n8 root=0801 ro init=/bin/sh"
+CONFIG_CMDLINE="mem=32M console=ttyS0,115200n8 root=/dev/ram0 rw initrd=0x10600000,8M ramdisk_size=8192"
 # CONFIG_XIP_KERNEL is not set
 # CONFIG_KEXEC is not set
 # CONFIG_ATAGS_PROC is not set
@@ -291,20 +300,7 @@ CONFIG_CMDLINE="mem=32M console=ttyS0,115200n8 root=0801 ro init=/bin/sh"
 #
 # CPU Frequency scaling
 #
-CONFIG_CPU_FREQ=y
-CONFIG_CPU_FREQ_TABLE=y
-# CONFIG_CPU_FREQ_DEBUG is not set
-CONFIG_CPU_FREQ_STAT=y
-# CONFIG_CPU_FREQ_STAT_DETAILS is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
-CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE=y
-# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
-# CONFIG_CPU_FREQ_GOV_PERFORMANCE is not set
-# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
-CONFIG_CPU_FREQ_GOV_USERSPACE=y
-# CONFIG_CPU_FREQ_GOV_ONDEMAND is not set
-# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
+# CONFIG_CPU_FREQ is not set
 
 #
 # Floating point emulation
@@ -322,8 +318,9 @@ CONFIG_FPE_NWFPE=y
 # Userspace binary formats
 #
 CONFIG_BINFMT_ELF=y
-CONFIG_BINFMT_AOUT=y
+# CONFIG_BINFMT_AOUT is not set
 # CONFIG_BINFMT_MISC is not set
+# CONFIG_ARTHUR is not set
 
 #
 # Power management options
@@ -433,21 +430,102 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_FW_LOADER is not set
+CONFIG_DEBUG_DRIVER=y
+# CONFIG_DEBUG_DEVRES is not set
 # CONFIG_SYS_HYPERVISOR is not set
 # CONFIG_CONNECTOR is not set
-# CONFIG_MTD is not set
+CONFIG_MTD=y
+CONFIG_MTD_DEBUG=y
+CONFIG_MTD_DEBUG_VERBOSE=3
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_AFS_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+CONFIG_MTD_CFI_INTELEXT=y
+# CONFIG_MTD_CFI_AMDSTD is not set
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_PHYSMAP is not set
+# CONFIG_MTD_ARM_INTEGRATOR is not set
+# CONFIG_MTD_OMAP_NOR is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_DATAFLASH is not set
+# CONFIG_MTD_M25P80 is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+# CONFIG_MTD_NAND is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
 # CONFIG_BLK_DEV_CRYPTOLOOP is not set
 # CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_UB is not set
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=8192
 # CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
-CONFIG_ATA_OVER_ETH=m
+# CONFIG_ATA_OVER_ETH is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
@@ -457,42 +535,9 @@ CONFIG_MISC_DEVICES=y
 # SCSI device support
 #
 # CONFIG_RAID_ATTRS is not set
-CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
 # CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
-# CONFIG_BLK_DEV_SD is not set
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
-# CONFIG_CHR_DEV_SG is not set
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_SCSI_DEBUG is not set
 # CONFIG_ATA is not set
 # CONFIG_MD is not set
 CONFIG_NETDEVICES=y
@@ -509,6 +554,7 @@ CONFIG_MII=y
 # CONFIG_AX88796 is not set
 CONFIG_SMC91X=y
 # CONFIG_DM9000 is not set
+# CONFIG_ENC28J60 is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
 # CONFIG_IBM_NEW_EMAC_RGMII is not set
 # CONFIG_IBM_NEW_EMAC_TAH is not set
@@ -523,6 +569,15 @@ CONFIG_NETDEV_10000=y
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
 # CONFIG_WAN is not set
 CONFIG_PPP=y
 # CONFIG_PPP_MULTILINK is not set
@@ -612,7 +667,8 @@ CONFIG_SERIAL_CORE_CONSOLE=y
 CONFIG_UNIX98_PTYS=y
 # CONFIG_LEGACY_PTYS is not set
 # CONFIG_IPMI_HANDLER is not set
-# CONFIG_HW_RANDOM is not set
+CONFIG_HW_RANDOM=m
+CONFIG_HW_RANDOM_OMAP=m
 # CONFIG_NVRAM is not set
 # CONFIG_R3964 is not set
 # CONFIG_RAW_DRIVER is not set
@@ -638,6 +694,7 @@ CONFIG_I2C_OMAP=y
 # CONFIG_I2C_SIMTEC is not set
 # CONFIG_I2C_TAOS_EVM is not set
 # CONFIG_I2C_STUB is not set
+# CONFIG_I2C_TINY_USB is not set
 
 #
 # Miscellaneous I2C Chip support
@@ -647,8 +704,10 @@ CONFIG_I2C_OMAP=y
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_ISP1301_OMAP is not set
+CONFIG_ISP1301_OMAP=y
 CONFIG_TPS65010=y
+# CONFIG_SENSORS_TLV320AIC23 is not set
+# CONFIG_GPIOEXPANDER_OMAP is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
@@ -659,8 +718,26 @@ CONFIG_TPS65010=y
 #
 # SPI support
 #
-# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
+CONFIG_SPI=y
+# CONFIG_SPI_DEBUG is not set
+CONFIG_SPI_MASTER=y
+
+#
+# SPI Master Controller Drivers
+#
+CONFIG_SPI_BITBANG=y
+CONFIG_SPI_OMAP_UWIRE=y
+
+#
+# SPI Protocol Masters
+#
+# CONFIG_SPI_AT25 is not set
+CONFIG_SPI_TSC2101=y
+# CONFIG_SPI_TSC2102 is not set
+# CONFIG_SPI_TSC210X is not set
+# CONFIG_SPI_TSC2301 is not set
+# CONFIG_SPI_SPIDEV is not set
+# CONFIG_SPI_TLE62X0 is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 CONFIG_HWMON=y
@@ -673,7 +750,6 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_ADM1031 is not set
 # CONFIG_SENSORS_ADM9240 is not set
 # CONFIG_SENSORS_ADT7470 is not set
-# CONFIG_SENSORS_ADT7473 is not set
 # CONFIG_SENSORS_ATXP1 is not set
 # CONFIG_SENSORS_DS1621 is not set
 # CONFIG_SENSORS_F71805F is not set
@@ -683,6 +759,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_GL520SM is not set
 # CONFIG_SENSORS_IT87 is not set
 # CONFIG_SENSORS_LM63 is not set
+# CONFIG_SENSORS_LM70 is not set
 # CONFIG_SENSORS_LM75 is not set
 # CONFIG_SENSORS_LM77 is not set
 # CONFIG_SENSORS_LM78 is not set
@@ -712,6 +789,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_W83L786NG is not set
 # CONFIG_SENSORS_W83627HF is not set
 # CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_SENSORS_TSC210X is not set
 # CONFIG_HWMON_DEBUG_CHIP is not set
 CONFIG_WATCHDOG=y
 CONFIG_WATCHDOG_NOWAYOUT=y
@@ -723,6 +801,11 @@ CONFIG_WATCHDOG_NOWAYOUT=y
 # CONFIG_OMAP_WATCHDOG is not set
 
 #
+# USB-based Watchdog Cards
+#
+# CONFIG_USBPCWATCHDOG is not set
+
+#
 # Sonics Silicon Backplane
 #
 CONFIG_SSB_POSSIBLE=y
@@ -740,6 +823,7 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_VIDEO_DEV is not set
 # CONFIG_DVB_CORE is not set
 CONFIG_DAB=y
+# CONFIG_USB_DABUSB is not set
 
 #
 # Graphics support
@@ -749,9 +833,9 @@ CONFIG_VIDEO_OUTPUT_CONTROL=m
 CONFIG_FB=y
 CONFIG_FIRMWARE_EDID=y
 # CONFIG_FB_DDC is not set
-# CONFIG_FB_CFB_FILLRECT is not set
-# CONFIG_FB_CFB_COPYAREA is not set
-# CONFIG_FB_CFB_IMAGEBLIT is not set
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
 # CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
 # CONFIG_FB_SYS_FILLRECT is not set
 # CONFIG_FB_SYS_COPYAREA is not set
@@ -769,7 +853,11 @@ CONFIG_FB_MODE_HELPERS=y
 #
 # CONFIG_FB_S1D13XXX is not set
 # CONFIG_FB_VIRTUAL is not set
-# CONFIG_FB_OMAP is not set
+CONFIG_FB_OMAP=y
+# CONFIG_FB_OMAP_LCDC_EXTERNAL is not set
+# CONFIG_FB_OMAP_BOOTLOADER_INIT is not set
+CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE=2
+# CONFIG_FB_OMAP_DMA_TUNE is not set
 # CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
@@ -785,17 +873,9 @@ CONFIG_DUMMY_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
 # CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
 # CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
-CONFIG_FONTS=y
+# CONFIG_FONTS is not set
 CONFIG_FONT_8x8=y
 CONFIG_FONT_8x16=y
-# CONFIG_FONT_6x11 is not set
-# CONFIG_FONT_7x14 is not set
-# CONFIG_FONT_PEARL_8x8 is not set
-# CONFIG_FONT_ACORN_8x8 is not set
-# CONFIG_FONT_MINI_4x6 is not set
-# CONFIG_FONT_SUN8x16 is not set
-# CONFIG_FONT_SUN12x22 is not set
-# CONFIG_FONT_10x18 is not set
 CONFIG_LOGO=y
 # CONFIG_LOGO_LINUX_MONO is not set
 # CONFIG_LOGO_LINUX_VGA16 is not set
@@ -804,37 +884,204 @@ CONFIG_LOGO_LINUX_CLUT224=y
 #
 # Sound
 #
-CONFIG_SOUND=y
+# CONFIG_SOUND is not set
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+# CONFIG_HID_DEBUG is not set
+# CONFIG_HIDRAW is not set
 
 #
-# Advanced Linux Sound Architecture
+# USB Input Devices
 #
-# CONFIG_SND is not set
+# CONFIG_USB_HID is not set
 
 #
-# Open Sound System
+# USB HID Boot Protocol drivers
 #
-CONFIG_SOUND_PRIME=y
-# CONFIG_SOUND_MSNDCLAS is not set
-# CONFIG_SOUND_MSNDPIN is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-CONFIG_HID_DEBUG=y
-# CONFIG_HIDRAW is not set
+# CONFIG_USB_KBD is not set
+# CONFIG_USB_MOUSE is not set
 CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
 # CONFIG_USB_ARCH_HAS_EHCI is not set
-# CONFIG_USB is not set
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
+
+#
+# Miscellaneous USB options
+#
+CONFIG_USB_DEVICEFS=y
+# CONFIG_USB_DEVICE_CLASS is not set
+# CONFIG_USB_DYNAMIC_MINORS is not set
+CONFIG_USB_SUSPEND=y
+# CONFIG_USB_PERSIST is not set
+CONFIG_USB_OTG=y
+CONFIG_USB_OTG_WHITELIST=y
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_ISP116X_HCD is not set
+CONFIG_USB_OHCI_HCD=y
+# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_MUSB_HDRC is not set
+# CONFIG_USB_GADGET_MUSB_HDRC is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
 
 #
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
 #
-# CONFIG_USB_GADGET is not set
-# CONFIG_MMC is not set
+
+#
+# may also be needed; see USB_STORAGE Help for more information
+#
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+CONFIG_USB_MON=y
+
+#
+# USB port drivers
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_AUERSWALD is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_PHIDGET is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+CONFIG_USB_TEST=y
+CONFIG_USB_GADGET=y
+# CONFIG_USB_GADGET_DEBUG is not set
+# CONFIG_USB_GADGET_DEBUG_FILES is not set
+CONFIG_USB_GADGET_SELECTED=y
+# CONFIG_USB_GADGET_AMD5536UDC is not set
+# CONFIG_USB_GADGET_ATMEL_USBA is not set
+# CONFIG_USB_GADGET_FSL_USB2 is not set
+# CONFIG_USB_GADGET_NET2280 is not set
+# CONFIG_USB_GADGET_PXA2XX is not set
+# CONFIG_USB_GADGET_M66592 is not set
+# CONFIG_USB_GADGET_GOKU is not set
+# CONFIG_USB_GADGET_LH7A40X is not set
+CONFIG_USB_GADGET_OMAP=y
+CONFIG_USB_OMAP=y
+# CONFIG_USB_GADGET_S3C2410 is not set
+# CONFIG_USB_GADGET_AT91 is not set
+# CONFIG_USB_GADGET_DUMMY_HCD is not set
+# CONFIG_USB_GADGET_DUALSPEED is not set
+# CONFIG_USB_ZERO is not set
+CONFIG_USB_ETH=y
+CONFIG_USB_ETH_RNDIS=y
+# CONFIG_USB_GADGETFS is not set
+# CONFIG_USB_FILE_STORAGE is not set
+# CONFIG_USB_G_SERIAL is not set
+# CONFIG_USB_MIDI_GADGET is not set
+# CONFIG_USB_G_PRINTER is not set
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+# CONFIG_MMC_UNSAFE_RESUME is not set
+
+#
+# MMC/SD Card Drivers
+#
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_BLOCK_BOUNCE=y
+# CONFIG_SDIO_UART is not set
+
+#
+# MMC/SD Host Controller Drivers
+#
+CONFIG_MMC_OMAP=y
+# CONFIG_MMC_SPI is not set
 # CONFIG_NEW_LEDS is not set
 CONFIG_RTC_LIB=y
-# CONFIG_RTC_CLASS is not set
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+
+#
+# SPI RTC drivers
+#
+# CONFIG_RTC_DRV_MAX6902 is not set
+# CONFIG_RTC_DRV_R9701 is not set
+# CONFIG_RTC_DRV_RS5C348 is not set
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+CONFIG_RTC_DRV_OMAP=y
+
+#
+# CBUS support
+#
+# CONFIG_CBUS is not set
+# CONFIG_OMAP_DSP is not set
 
 #
 # File systems
@@ -894,6 +1141,17 @@ CONFIG_SYSFS=y
 # CONFIG_BEFS_FS is not set
 # CONFIG_BFS_FS is not set
 # CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_XATTR is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
 CONFIG_CRAMFS=y
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
@@ -904,19 +1162,16 @@ CONFIG_ROMFS_FS=y
 # CONFIG_UFS_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-CONFIG_NFS_V4=y
+# CONFIG_NFS_V3 is not set
+# CONFIG_NFS_V4 is not set
 # CONFIG_NFS_DIRECTIO is not set
 # CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
 CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
-CONFIG_SUNRPC_GSS=y
 # CONFIG_SUNRPC_BIND34 is not set
-CONFIG_RPCSEC_GSS_KRB5=y
+# CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
 # CONFIG_CIFS is not set
@@ -981,11 +1236,38 @@ CONFIG_ENABLE_MUST_CHECK=y
 # CONFIG_UNUSED_SYMBOLS is not set
 # CONFIG_DEBUG_FS is not set
 # CONFIG_HEADERS_CHECK is not set
-# CONFIG_DEBUG_KERNEL is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
 CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_INFO=y
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
 CONFIG_FRAME_POINTER=y
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_FAULT_INJECTION is not set
 # CONFIG_SAMPLES is not set
-# CONFIG_DEBUG_USER is not set
+CONFIG_DEBUG_USER=y
+CONFIG_DEBUG_ERRORS=y
+# CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_DEBUG_LL is not set
 
 #
 # Security options
@@ -994,31 +1276,29 @@ CONFIG_FRAME_POINTER=y
 # CONFIG_SECURITY is not set
 # CONFIG_SECURITY_FILE_CAPABILITIES is not set
 CONFIG_CRYPTO=y
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_BLKCIPHER=y
 # CONFIG_CRYPTO_SEQIV is not set
-CONFIG_CRYPTO_MANAGER=y
+# CONFIG_CRYPTO_MANAGER is not set
 # CONFIG_CRYPTO_HMAC is not set
 # CONFIG_CRYPTO_XCBC is not set
 # CONFIG_CRYPTO_NULL is not set
 # CONFIG_CRYPTO_MD4 is not set
-CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_MD5 is not set
 # CONFIG_CRYPTO_SHA1 is not set
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
 # CONFIG_CRYPTO_WP512 is not set
 # CONFIG_CRYPTO_TGR192 is not set
 # CONFIG_CRYPTO_GF128MUL is not set
-CONFIG_CRYPTO_ECB=m
-CONFIG_CRYPTO_CBC=y
-CONFIG_CRYPTO_PCBC=m
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_PCBC is not set
 # CONFIG_CRYPTO_LRW is not set
 # CONFIG_CRYPTO_XTS is not set
 # CONFIG_CRYPTO_CTR is not set
 # CONFIG_CRYPTO_GCM is not set
 # CONFIG_CRYPTO_CCM is not set
 # CONFIG_CRYPTO_CRYPTD is not set
-CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_DES is not set
 # CONFIG_CRYPTO_FCRYPT is not set
 # CONFIG_CRYPTO_BLOWFISH is not set
 # CONFIG_CRYPTO_TWOFISH is not set
@@ -1052,6 +1332,7 @@ CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
 # CONFIG_LIBCRC32C is not set
 CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
 CONFIG_PLIST=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
diff --git a/arch/arm/configs/omap_h4_2420_defconfig b/arch/arm/configs/omap_h4_2420_defconfig
new file mode 100644
index 000000000000..5bc89185a64f
--- /dev/null
+++ b/arch/arm/configs/omap_h4_2420_defconfig
@@ -0,0 +1,1120 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.23-rc6-omap1
+# Tue Sep 18 11:44:58 2007
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_MMU=y
+# CONFIG_NO_IOPORT is not set
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_ZONE_DMA=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+CONFIG_BSD_PROCESS_ACCT=y
+# CONFIG_BSD_PROCESS_ACCT_V3 is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_AUDIT is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_SYSFS_DEPRECATED=y
+# CONFIG_RELAY is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_EMBEDDED=y
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+CONFIG_KALLSYMS_EXTRA_PASS=y
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+CONFIG_MODVERSIONS=y
+CONFIG_MODULE_SRCVERSION_ALL=y
+CONFIG_KMOD=y
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+
+#
+# System Type
+#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS7500 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_CO285 is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_DAVINCI is not set
+CONFIG_ARCH_OMAP=y
+
+#
+# TI OMAP Implementations
+#
+CONFIG_ARCH_OMAP_OTG=y
+# CONFIG_ARCH_OMAP1 is not set
+CONFIG_ARCH_OMAP2=y
+# CONFIG_ARCH_OMAP3 is not set
+
+#
+# OMAP Feature Selections
+#
+CONFIG_OMAP_DEBUG_DEVICES=y
+# CONFIG_OMAP_RESET_CLOCKS is not set
+CONFIG_OMAP_BOOT_TAG=y
+# CONFIG_OMAP_BOOT_REASON is not set
+# CONFIG_OMAP_COMPONENT_VERSION is not set
+# CONFIG_OMAP_GPIO_SWITCH is not set
+CONFIG_OMAP_MUX=y
+CONFIG_OMAP_MUX_DEBUG=y
+CONFIG_OMAP_MUX_WARNINGS=y
+# CONFIG_OMAP_STI is not set
+CONFIG_OMAP_MCBSP=y
+# CONFIG_OMAP_MMU_FWK is not set
+# CONFIG_OMAP_MBOX_FWK is not set
+CONFIG_OMAP_MPU_TIMER=y
+# CONFIG_OMAP_32K_TIMER is not set
+CONFIG_OMAP_DM_TIMER=y
+CONFIG_OMAP_LL_DEBUG_UART1=y
+# CONFIG_OMAP_LL_DEBUG_UART2 is not set
+# CONFIG_OMAP_LL_DEBUG_UART3 is not set
+CONFIG_OMAP_SERIAL_WAKE=y
+# CONFIG_OMAP_DSP is not set
+# CONFIG_MACH_OMAP_GENERIC is not set
+
+#
+# OMAP Core Type
+#
+CONFIG_ARCH_OMAP24XX=y
+CONFIG_ARCH_OMAP2420=y
+# CONFIG_ARCH_OMAP2430 is not set
+
+#
+# OMAP Board Type
+#
+# CONFIG_MACH_NOKIA_N800 is not set
+CONFIG_MACH_OMAP_H4=y
+# CONFIG_MACH_OMAP_H4_TUSB is not set
+# CONFIG_MACH_OMAP_H4_OTG is not set
+# CONFIG_MACH_OMAP2_H4_USB1 is not set
+# CONFIG_MACH_OMAP_APOLLON is not set
+# CONFIG_MACH_OMAP_APOLLON_PLUS is not set
+# CONFIG_MACH_OMAP_2430SDP is not set
+
+#
+# Boot options
+#
+
+#
+# Power management
+#
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_V6=y
+# CONFIG_CPU_32v6K is not set
+CONFIG_CPU_32v6=y
+CONFIG_CPU_ABRT_EV6=y
+CONFIG_CPU_PABRT_NOIFAR=y
+CONFIG_CPU_CACHE_V6=y
+CONFIG_CPU_CACHE_VIPT=y
+CONFIG_CPU_COPY_V6=y
+CONFIG_CPU_TLB_V6=y
+CONFIG_CPU_HAS_ASID=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_BPREDICT_DISABLE is not set
+# CONFIG_OUTER_CACHE is not set
+
+#
+# Bus support
+#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+
+#
+# PCCARD (PCMCIA/CardBus) support
+#
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+# CONFIG_TICK_ONESHOT is not set
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+# CONFIG_PREEMPT is not set
+CONFIG_HZ=100
+CONFIG_AEABI=y
+CONFIG_OABI_COMPAT=y
+# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
+# CONFIG_LEDS is not set
+CONFIG_ALIGNMENT_TRAP=y
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="root=/dev/ram0 rw console=ttyS0,115200n8 initrd=0x80600000,8M ramdisk_size=8192"
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# CPU Frequency scaling
+#
+# CONFIG_CPU_FREQ is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_FPE_NWFPE=y
+# CONFIG_FPE_NWFPE_XP is not set
+# CONFIG_FPE_FASTFPE is not set
+# CONFIG_VFP is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_AOUT is not set
+CONFIG_BINFMT_MISC=y
+
+#
+# Power management options
+#
+# CONFIG_PM is not set
+CONFIG_SUSPEND_UP_POSSIBLE=y
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+CONFIG_NET_KEY=y
+# CONFIG_NET_KEY_MIGRATE is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+# CONFIG_IP_PNP_BOOTP is not set
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+CONFIG_IRDA=y
+
+#
+# IrDA protocols
+#
+CONFIG_IRLAN=y
+CONFIG_IRCOMM=y
+# CONFIG_IRDA_ULTRA is not set
+
+#
+# IrDA options
+#
+# CONFIG_IRDA_CACHE_LAST_LSAP is not set
+# CONFIG_IRDA_FAST_RR is not set
+# CONFIG_IRDA_DEBUG is not set
+
+#
+# Infrared-port device drivers
+#
+
+#
+# SIR device drivers
+#
+# CONFIG_IRTTY_SIR is not set
+
+#
+# Dongle support
+#
+
+#
+# Old SIR device drivers
+#
+# CONFIG_IRPORT_SIR is not set
+
+#
+# Old Serial dongle support
+#
+
+#
+# FIR device drivers
+#
+CONFIG_OMAP_IR=y
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
+# CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_FW_LOADER is not set
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+CONFIG_MTD_CONCAT=y
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_AFS_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+CONFIG_MTD_CFI_INTELEXT=y
+# CONFIG_MTD_CFI_AMDSTD is not set
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_PHYSMAP is not set
+# CONFIG_MTD_ARM_INTEGRATOR is not set
+CONFIG_MTD_OMAP_NOR=y
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+# CONFIG_MTD_NAND is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=16384
+CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_PHYLIB is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_AX88796 is not set
+CONFIG_SMC91X=y
+# CONFIG_DM9000 is not set
+CONFIG_NETDEV_1000=y
+CONFIG_NETDEV_10000=y
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+# CONFIG_WAN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_SHAPER is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_TSDEV is not set
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ATKBD is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+CONFIG_KEYBOARD_OMAP=y
+# CONFIG_KEYBOARD_GPIO is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_NR_UARTS=32
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
+CONFIG_SERIAL_8250_EXTENDED=y
+CONFIG_SERIAL_8250_MANY_PORTS=y
+CONFIG_SERIAL_8250_SHARE_IRQ=y
+CONFIG_SERIAL_8250_DETECT_IRQ=y
+CONFIG_SERIAL_8250_RSA=y
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_IPMI_HANDLER is not set
+CONFIG_WATCHDOG=y
+CONFIG_WATCHDOG_NOWAYOUT=y
+
+#
+# Watchdog Device Drivers
+#
+# CONFIG_SOFT_WATCHDOG is not set
+CONFIG_OMAP_WATCHDOG=y
+CONFIG_HW_RANDOM=m
+CONFIG_HW_RANDOM_OMAP=m
+# CONFIG_NVRAM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+# CONFIG_I2C_CHARDEV is not set
+
+#
+# I2C Algorithms
+#
+# CONFIG_I2C_ALGOBIT is not set
+# CONFIG_I2C_ALGOPCF is not set
+# CONFIG_I2C_ALGOPCA is not set
+
+#
+# I2C Hardware Bus support
+#
+# CONFIG_I2C_GPIO is not set
+# CONFIG_I2C_OCORES is not set
+CONFIG_I2C_OMAP=y
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_STUB is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_SENSORS_DS1337 is not set
+# CONFIG_SENSORS_DS1374 is not set
+# CONFIG_DS1682 is not set
+# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_ISP1301_OMAP is not set
+# CONFIG_TPS65010 is not set
+# CONFIG_SENSORS_TLV320AIC23 is not set
+CONFIG_GPIOEXPANDER_OMAP=y
+# CONFIG_TWL4030_CORE is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+CONFIG_MENELAUS=y
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+
+#
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+# CONFIG_W1 is not set
+# CONFIG_HWMON is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_EEPROM_93CX6 is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_SM501 is not set
+# CONFIG_NEW_LEDS is not set
+
+#
+# Multimedia devices
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+CONFIG_DAB=y
+
+#
+# Graphics support
+#
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+# CONFIG_VGASTATE is not set
+CONFIG_VIDEO_OUTPUT_CONTROL=m
+CONFIG_FB=y
+CONFIG_FIRMWARE_EDID=y
+# CONFIG_FB_DDC is not set
+# CONFIG_FB_CFB_FILLRECT is not set
+# CONFIG_FB_CFB_COPYAREA is not set
+# CONFIG_FB_CFB_IMAGEBLIT is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_SYS_FOPS is not set
+CONFIG_FB_DEFERRED_IO=y
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_S1D13XXX is not set
+CONFIG_FB_OMAP=y
+# CONFIG_FB_OMAP_LCDC_EXTERNAL is not set
+# CONFIG_FB_OMAP_BOOTLOADER_INIT is not set
+CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE=2
+# CONFIG_FB_VIRTUAL is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
+# CONFIG_FONTS is not set
+CONFIG_FONT_8x8=y
+CONFIG_FONT_8x16=y
+CONFIG_LOGO=y
+# CONFIG_LOGO_LINUX_MONO is not set
+# CONFIG_LOGO_LINUX_VGA16 is not set
+CONFIG_LOGO_LINUX_CLUT224=y
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+# CONFIG_HID_DEBUG is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+# CONFIG_USB is not set
+
+#
+# Enable Host or Gadget support to see Inventra options
+#
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# USB Gadget Support
+#
+# CONFIG_USB_GADGET is not set
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+# CONFIG_MMC_UNSAFE_RESUME is not set
+
+#
+# MMC/SD Card Drivers
+#
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_BLOCK_BOUNCE=y
+
+#
+# MMC/SD Host Controller Drivers
+#
+CONFIG_MMC_OMAP=y
+CONFIG_RTC_LIB=y
+# CONFIG_RTC_CLASS is not set
+
+#
+# DMA Engine support
+#
+# CONFIG_DMA_ENGINE is not set
+
+#
+# DMA Clients
+#
+
+#
+# DMA Devices
+#
+
+#
+# CBUS support
+#
+# CONFIG_CBUS is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+# CONFIG_EXT3_FS_XATTR is not set
+# CONFIG_EXT4DEV_FS is not set
+CONFIG_JBD=y
+# CONFIG_JBD_DEBUG is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+CONFIG_QUOTA=y
+# CONFIG_QFMT_V1 is not set
+CONFIG_QFMT_V2=y
+CONFIG_QUOTACTL=y
+CONFIG_DNOTIFY=y
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_RAMFS=y
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_XATTR is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+
+#
+# Network File Systems
+#
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+CONFIG_NFS_V4=y
+# CONFIG_NFS_DIRECTIO is not set
+# CONFIG_NFSD is not set
+CONFIG_ROOT_NFS=y
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+CONFIG_SUNRPC_GSS=y
+# CONFIG_SUNRPC_BIND34 is not set
+CONFIG_RPCSEC_GSS_KRB5=y
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_BSD_DISKLABEL is not set
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_UNIXWARE_DISKLABEL is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+# CONFIG_SYSV68_PARTITION is not set
+
+#
+# Native Language Support
+#
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+# CONFIG_NLS_ISO8859_1 is not set
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+
+#
+# Distributed Lock Manager
+#
+# CONFIG_DLM is not set
+
+#
+# Profiling support
+#
+# CONFIG_PROFILING is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+CONFIG_DEBUG_MUTEXES=y
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_LIST is not set
+CONFIG_FRAME_POINTER=y
+CONFIG_FORCED_INLINING=y
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_DEBUG_USER is not set
+# CONFIG_DEBUG_ERRORS is not set
+CONFIG_DEBUG_LL=y
+# CONFIG_DEBUG_ICEDCC is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+CONFIG_CRYPTO=y
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_MANAGER=y
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_MD4 is not set
+CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_WP512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+CONFIG_CRYPTO_ECB=m
+CONFIG_CRYPTO_CBC=y
+CONFIG_CRYPTO_PCBC=m
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_TEST is not set
+CONFIG_CRYPTO_HW=y
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_CRC_CCITT=y
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+CONFIG_LIBCRC32C=y
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/omap_innovator_1510_defconfig b/arch/arm/configs/omap_innovator_1510_defconfig
new file mode 100644
index 000000000000..55b2611bd90a
--- /dev/null
+++ b/arch/arm/configs/omap_innovator_1510_defconfig
@@ -0,0 +1,1253 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.23-rc6-omap1
+# Tue Sep 18 11:45:02 2007
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_MMU=y
+# CONFIG_NO_IOPORT is not set
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_ZONE_DMA=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_AUDIT is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_SYSFS_DEPRECATED=y
+# CONFIG_RELAY is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+# CONFIG_EMBEDDED is not set
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+
+#
+# System Type
+#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS7500 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_CO285 is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_DAVINCI is not set
+CONFIG_ARCH_OMAP=y
+
+#
+# TI OMAP Implementations
+#
+CONFIG_ARCH_OMAP1=y
+# CONFIG_ARCH_OMAP2 is not set
+# CONFIG_ARCH_OMAP3 is not set
+
+#
+# OMAP Feature Selections
+#
+# CONFIG_OMAP_RESET_CLOCKS is not set
+# CONFIG_OMAP_BOOT_TAG is not set
+# CONFIG_OMAP_GPIO_SWITCH is not set
+CONFIG_OMAP_MUX=y
+# CONFIG_OMAP_MUX_DEBUG is not set
+CONFIG_OMAP_MUX_WARNINGS=y
+CONFIG_OMAP_MCBSP=y
+# CONFIG_OMAP_MMU_FWK is not set
+# CONFIG_OMAP_MBOX_FWK is not set
+CONFIG_OMAP_MPU_TIMER=y
+# CONFIG_OMAP_32K_TIMER is not set
+CONFIG_OMAP_LL_DEBUG_UART1=y
+# CONFIG_OMAP_LL_DEBUG_UART2 is not set
+# CONFIG_OMAP_LL_DEBUG_UART3 is not set
+CONFIG_OMAP_SERIAL_WAKE=y
+# CONFIG_OMAP_DSP is not set
+
+#
+# OMAP Core Type
+#
+# CONFIG_ARCH_OMAP730 is not set
+CONFIG_ARCH_OMAP15XX=y
+# CONFIG_ARCH_OMAP16XX is not set
+
+#
+# OMAP Board Type
+#
+CONFIG_MACH_OMAP_INNOVATOR=y
+# CONFIG_MACH_VOICEBLUE is not set
+# CONFIG_MACH_OMAP_PALMTE is not set
+# CONFIG_MACH_OMAP_PALMZ71 is not set
+# CONFIG_MACH_OMAP_PALMTT is not set
+# CONFIG_MACH_SX1 is not set
+# CONFIG_MACH_AMS_DELTA is not set
+# CONFIG_MACH_OMAP_GENERIC is not set
+
+#
+# OMAP CPU Speed
+#
+# CONFIG_OMAP_CLOCKS_SET_BY_BOOTLOADER is not set
+CONFIG_OMAP_ARM_168MHZ=y
+# CONFIG_OMAP_ARM_150MHZ is not set
+# CONFIG_OMAP_ARM_120MHZ is not set
+# CONFIG_OMAP_ARM_60MHZ is not set
+# CONFIG_OMAP_ARM_30MHZ is not set
+# CONFIG_MACH_OMAP_APOLLON_PLUS is not set
+
+#
+# Boot options
+#
+
+#
+# Power management
+#
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_ARM925T=y
+CONFIG_CPU_32v4T=y
+CONFIG_CPU_ABRT_EV4T=y
+CONFIG_CPU_PABRT_NOIFAR=y
+CONFIG_CPU_CACHE_V4WT=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_COPY_V4WB=y
+CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+CONFIG_CPU_DCACHE_WRITETHROUGH=y
+# CONFIG_OUTER_CACHE is not set
+
+#
+# Bus support
+#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+
+#
+# PCCARD (PCMCIA/CardBus) support
+#
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+# CONFIG_TICK_ONESHOT is not set
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_PREEMPT=y
+CONFIG_HZ=100
+# CONFIG_AEABI is not set
+# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
+CONFIG_LEDS=y
+CONFIG_ALIGNMENT_TRAP=y
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="console=ttyS0,115200n8 root=/dev/nfs ip=bootp noinitrd"
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# CPU Frequency scaling
+#
+# CONFIG_CPU_FREQ is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_FPE_NWFPE=y
+# CONFIG_FPE_NWFPE_XP is not set
+# CONFIG_FPE_FASTFPE is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+# CONFIG_ARTHUR is not set
+
+#
+# Power management options
+#
+CONFIG_PM=y
+# CONFIG_PM_LEGACY is not set
+# CONFIG_PM_DEBUG is not set
+CONFIG_PM_SLEEP=y
+CONFIG_SUSPEND_UP_POSSIBLE=y
+CONFIG_SUSPEND=y
+# CONFIG_APM_EMULATION is not set
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_IP_MROUTE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
+# CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_FW_LOADER is not set
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+# CONFIG_MTD is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=8192
+CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+CONFIG_CHR_DEV_ST=y
+# CONFIG_CHR_DEV_OSST is not set
+CONFIG_BLK_DEV_SR=y
+# CONFIG_BLK_DEV_SR_VENDOR is not set
+CONFIG_CHR_DEV_SG=y
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+CONFIG_SCSI_MULTI_LUN=y
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+CONFIG_SCSI_LOWLEVEL=y
+# CONFIG_ISCSI_TCP is not set
+# CONFIG_SCSI_DEBUG is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_PHYLIB is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_AX88796 is not set
+CONFIG_SMC91X=y
+# CONFIG_DM9000 is not set
+CONFIG_NETDEV_1000=y
+CONFIG_NETDEV_10000=y
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+CONFIG_USB_RTL8150=y
+CONFIG_USB_USBNET_MII=y
+CONFIG_USB_USBNET=y
+CONFIG_USB_NET_AX8817X=y
+CONFIG_USB_NET_CDCETHER=y
+# CONFIG_USB_NET_DM9601 is not set
+# CONFIG_USB_NET_GL620A is not set
+CONFIG_USB_NET_NET1080=y
+# CONFIG_USB_NET_PLUSB is not set
+# CONFIG_USB_NET_MCS7830 is not set
+# CONFIG_USB_NET_RNDIS_HOST is not set
+# CONFIG_USB_NET_CDC_SUBSET is not set
+CONFIG_USB_NET_ZAURUS=y
+# CONFIG_WAN is not set
+CONFIG_PPP=y
+CONFIG_PPP_MULTILINK=y
+# CONFIG_PPP_FILTER is not set
+CONFIG_PPP_ASYNC=y
+# CONFIG_PPP_SYNC_TTY is not set
+CONFIG_PPP_DEFLATE=y
+CONFIG_PPP_BSDCOMP=y
+# CONFIG_PPP_MPPE is not set
+# CONFIG_PPPOE is not set
+# CONFIG_PPPOL2TP is not set
+# CONFIG_SLIP is not set
+CONFIG_SLHC=y
+# CONFIG_SHAPER is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+CONFIG_INPUT_MOUSEDEV_PSAUX=y
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=240
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=320
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_TSDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ATKBD is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+CONFIG_KEYBOARD_OMAP=y
+CONFIG_OMAP_PS2=m
+# CONFIG_KEYBOARD_GPIO is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+CONFIG_SERIO_SERPORT=y
+# CONFIG_SERIO_RAW is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_NR_UARTS=4
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
+# CONFIG_SERIAL_8250_EXTENDED is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_HW_RANDOM=m
+# CONFIG_NVRAM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+# CONFIG_I2C_CHARDEV is not set
+
+#
+# I2C Algorithms
+#
+# CONFIG_I2C_ALGOBIT is not set
+# CONFIG_I2C_ALGOPCF is not set
+# CONFIG_I2C_ALGOPCA is not set
+
+#
+# I2C Hardware Bus support
+#
+# CONFIG_I2C_GPIO is not set
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_OMAP is not set
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_STUB is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_SENSORS_DS1337 is not set
+# CONFIG_SENSORS_DS1374 is not set
+# CONFIG_DS1682 is not set
+# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_TPS65010 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+
+#
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+# CONFIG_W1 is not set
+CONFIG_HWMON=y
+# CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_ABITUGURU is not set
+# CONFIG_SENSORS_ABITUGURU3 is not set
+# CONFIG_SENSORS_AD7418 is not set
+# CONFIG_SENSORS_ADM1021 is not set
+# CONFIG_SENSORS_ADM1025 is not set
+# CONFIG_SENSORS_ADM1026 is not set
+# CONFIG_SENSORS_ADM1029 is not set
+# CONFIG_SENSORS_ADM1031 is not set
+# CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ASB100 is not set
+# CONFIG_SENSORS_ATXP1 is not set
+# CONFIG_SENSORS_DS1621 is not set
+# CONFIG_SENSORS_F71805F is not set
+# CONFIG_SENSORS_FSCHER is not set
+# CONFIG_SENSORS_FSCPOS is not set
+# CONFIG_SENSORS_GL518SM is not set
+# CONFIG_SENSORS_GL520SM is not set
+# CONFIG_SENSORS_IT87 is not set
+# CONFIG_SENSORS_LM63 is not set
+# CONFIG_SENSORS_LM75 is not set
+# CONFIG_SENSORS_LM77 is not set
+# CONFIG_SENSORS_LM78 is not set
+# CONFIG_SENSORS_LM80 is not set
+# CONFIG_SENSORS_LM83 is not set
+# CONFIG_SENSORS_LM85 is not set
+# CONFIG_SENSORS_LM87 is not set
+# CONFIG_SENSORS_LM90 is not set
+# CONFIG_SENSORS_LM92 is not set
+# CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_MAX1619 is not set
+# CONFIG_SENSORS_MAX6650 is not set
+# CONFIG_SENSORS_PC87360 is not set
+# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_DME1737 is not set
+# CONFIG_SENSORS_SMSC47M1 is not set
+# CONFIG_SENSORS_SMSC47M192 is not set
+# CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_THMC50 is not set
+# CONFIG_SENSORS_VT1211 is not set
+# CONFIG_SENSORS_W83781D is not set
+# CONFIG_SENSORS_W83791D is not set
+# CONFIG_SENSORS_W83792D is not set
+# CONFIG_SENSORS_W83793 is not set
+# CONFIG_SENSORS_W83L785TS is not set
+# CONFIG_SENSORS_W83627HF is not set
+# CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_EEPROM_93CX6 is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_SM501 is not set
+# CONFIG_NEW_LEDS is not set
+
+#
+# Multimedia devices
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+CONFIG_DAB=y
+# CONFIG_USB_DABUSB is not set
+
+#
+# Graphics support
+#
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+# CONFIG_VGASTATE is not set
+CONFIG_VIDEO_OUTPUT_CONTROL=m
+CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
+# CONFIG_FB_CFB_FILLRECT is not set
+# CONFIG_FB_CFB_COPYAREA is not set
+# CONFIG_FB_CFB_IMAGEBLIT is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_SYS_FOPS is not set
+CONFIG_FB_DEFERRED_IO=y
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_S1D13XXX is not set
+CONFIG_FB_OMAP=y
+# CONFIG_FB_OMAP_LCDC_EXTERNAL is not set
+# CONFIG_FB_OMAP_BOOTLOADER_INIT is not set
+CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE=2
+# CONFIG_FB_OMAP_DMA_TUNE is not set
+# CONFIG_FB_VIRTUAL is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
+CONFIG_FONTS=y
+CONFIG_FONT_8x8=y
+CONFIG_FONT_8x16=y
+# CONFIG_FONT_6x11 is not set
+# CONFIG_FONT_7x14 is not set
+# CONFIG_FONT_PEARL_8x8 is not set
+# CONFIG_FONT_ACORN_8x8 is not set
+# CONFIG_FONT_MINI_4x6 is not set
+# CONFIG_FONT_SUN8x16 is not set
+# CONFIG_FONT_SUN12x22 is not set
+# CONFIG_FONT_10x18 is not set
+CONFIG_LOGO=y
+CONFIG_LOGO_LINUX_MONO=y
+CONFIG_LOGO_LINUX_VGA16=y
+CONFIG_LOGO_LINUX_CLUT224=y
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+# CONFIG_HID_DEBUG is not set
+
+#
+# USB Input Devices
+#
+CONFIG_USB_HID=y
+# CONFIG_USB_HIDINPUT_POWERBOOK is not set
+# CONFIG_HID_FF is not set
+# CONFIG_USB_HIDDEV is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+CONFIG_USB=y
+CONFIG_USB_DEBUG=y
+
+#
+# Miscellaneous USB options
+#
+CONFIG_USB_DEVICEFS=y
+# CONFIG_USB_DEVICE_CLASS is not set
+# CONFIG_USB_DYNAMIC_MINORS is not set
+CONFIG_USB_SUSPEND=y
+# CONFIG_USB_PERSIST is not set
+# CONFIG_USB_OTG is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_ISP116X_HCD is not set
+CONFIG_USB_OHCI_HCD=y
+# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_MUSB_HDRC is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# may also be needed; see USB_STORAGE Help for more information
+#
+CONFIG_USB_STORAGE=y
+# CONFIG_USB_STORAGE_DEBUG is not set
+CONFIG_USB_STORAGE_DATAFAB=y
+CONFIG_USB_STORAGE_FREECOM=y
+CONFIG_USB_STORAGE_DPCM=y
+# CONFIG_USB_STORAGE_USBAT is not set
+CONFIG_USB_STORAGE_SDDR09=y
+CONFIG_USB_STORAGE_SDDR55=y
+CONFIG_USB_STORAGE_JUMPSHOT=y
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+CONFIG_USB_MON=y
+
+#
+# USB port drivers
+#
+
+#
+# USB Serial Converter support
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_AUERSWALD is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_PHIDGET is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_TEST is not set
+
+#
+# USB DSL modem support
+#
+
+#
+# USB Gadget Support
+#
+# CONFIG_USB_GADGET is not set
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+# CONFIG_MMC_UNSAFE_RESUME is not set
+
+#
+# MMC/SD Card Drivers
+#
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_BLOCK_BOUNCE=y
+
+#
+# MMC/SD Host Controller Drivers
+#
+CONFIG_MMC_OMAP=y
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+
+#
+# SPI RTC drivers
+#
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+CONFIG_RTC_DRV_OMAP=y
+
+#
+# DMA Engine support
+#
+# CONFIG_DMA_ENGINE is not set
+
+#
+# DMA Clients
+#
+
+#
+# DMA Devices
+#
+
+#
+# CBUS support
+#
+# CONFIG_CBUS is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+CONFIG_EXT3_FS_XATTR=y
+# CONFIG_EXT3_FS_POSIX_ACL is not set
+# CONFIG_EXT3_FS_SECURITY is not set
+# CONFIG_EXT4DEV_FS is not set
+CONFIG_JBD=y
+# CONFIG_JBD_DEBUG is not set
+CONFIG_FS_MBCACHE=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+CONFIG_DNOTIFY=y
+CONFIG_AUTOFS_FS=y
+CONFIG_AUTOFS4_FS=y
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+CONFIG_ISO9660_FS=y
+CONFIG_JOLIET=y
+# CONFIG_ZISOFS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=m
+CONFIG_MSDOS_FS=m
+CONFIG_VFAT_FS=m
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_RAMFS=y
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+
+#
+# Network File Systems
+#
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+CONFIG_NFS_V4=y
+# CONFIG_NFS_DIRECTIO is not set
+# CONFIG_NFSD is not set
+CONFIG_ROOT_NFS=y
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+CONFIG_SUNRPC_GSS=y
+# CONFIG_SUNRPC_BIND34 is not set
+CONFIG_RPCSEC_GSS_KRB5=y
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_BSD_DISKLABEL is not set
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_UNIXWARE_DISKLABEL is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+# CONFIG_SYSV68_PARTITION is not set
+
+#
+# Native Language Support
+#
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+# CONFIG_NLS_CODEPAGE_437 is not set
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+# CONFIG_NLS_ISO8859_1 is not set
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+
+#
+# Distributed Lock Manager
+#
+# CONFIG_DLM is not set
+
+#
+# Profiling support
+#
+# CONFIG_PROFILING is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_SLAB is not set
+CONFIG_DEBUG_PREEMPT=y
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_LIST is not set
+CONFIG_FRAME_POINTER=y
+CONFIG_FORCED_INLINING=y
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_DEBUG_USER is not set
+# CONFIG_DEBUG_ERRORS is not set
+# CONFIG_DEBUG_LL is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+CONFIG_CRYPTO=y
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_MANAGER=y
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_MD4 is not set
+CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_WP512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+CONFIG_CRYPTO_ECB=m
+CONFIG_CRYPTO_CBC=y
+CONFIG_CRYPTO_PCBC=m
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_TEST is not set
+CONFIG_CRYPTO_HW=y
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_CRC_CCITT=y
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/omap_innovator_1610_defconfig b/arch/arm/configs/omap_innovator_1610_defconfig
new file mode 100644
index 000000000000..95d9f2be53e0
--- /dev/null
+++ b/arch/arm/configs/omap_innovator_1610_defconfig
@@ -0,0 +1,839 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.23-rc6-omap1
+# Tue Sep 18 11:45:05 2007
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_MMU=y
+# CONFIG_NO_IOPORT is not set
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_ZONE_DMA=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_AUDIT is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_SYSFS_DEPRECATED=y
+# CONFIG_RELAY is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+# CONFIG_EMBEDDED is not set
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLUB_DEBUG=y
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
+# CONFIG_SLOB is not set
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+
+#
+# System Type
+#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS7500 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_CO285 is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_DAVINCI is not set
+CONFIG_ARCH_OMAP=y
+
+#
+# TI OMAP Implementations
+#
+CONFIG_ARCH_OMAP_OTG=y
+CONFIG_ARCH_OMAP1=y
+# CONFIG_ARCH_OMAP2 is not set
+# CONFIG_ARCH_OMAP3 is not set
+
+#
+# OMAP Feature Selections
+#
+# CONFIG_OMAP_RESET_CLOCKS is not set
+# CONFIG_OMAP_BOOT_TAG is not set
+# CONFIG_OMAP_GPIO_SWITCH is not set
+CONFIG_OMAP_MUX=y
+# CONFIG_OMAP_MUX_DEBUG is not set
+CONFIG_OMAP_MUX_WARNINGS=y
+# CONFIG_OMAP_STI is not set
+CONFIG_OMAP_MCBSP=y
+# CONFIG_OMAP_MMU_FWK is not set
+# CONFIG_OMAP_MBOX_FWK is not set
+CONFIG_OMAP_MPU_TIMER=y
+# CONFIG_OMAP_32K_TIMER is not set
+# CONFIG_OMAP_DM_TIMER is not set
+CONFIG_OMAP_LL_DEBUG_UART1=y
+# CONFIG_OMAP_LL_DEBUG_UART2 is not set
+# CONFIG_OMAP_LL_DEBUG_UART3 is not set
+CONFIG_OMAP_SERIAL_WAKE=y
+# CONFIG_OMAP_DSP is not set
+
+#
+# OMAP Core Type
+#
+# CONFIG_ARCH_OMAP730 is not set
+# CONFIG_ARCH_OMAP15XX is not set
+CONFIG_ARCH_OMAP16XX=y
+
+#
+# OMAP Board Type
+#
+CONFIG_MACH_OMAP_INNOVATOR=y
+# CONFIG_MACH_OMAP_H2 is not set
+# CONFIG_MACH_OMAP_H3 is not set
+# CONFIG_MACH_OMAP_OSK is not set
+# CONFIG_MACH_NOKIA770 is not set
+# CONFIG_MACH_OMAP_GENERIC is not set
+
+#
+# OMAP CPU Speed
+#
+# CONFIG_OMAP_CLOCKS_SET_BY_BOOTLOADER is not set
+# CONFIG_OMAP_ARM_216MHZ is not set
+CONFIG_OMAP_ARM_192MHZ=y
+# CONFIG_OMAP_ARM_168MHZ is not set
+# CONFIG_OMAP_ARM_120MHZ is not set
+# CONFIG_OMAP_ARM_60MHZ is not set
+# CONFIG_OMAP_ARM_30MHZ is not set
+# CONFIG_MACH_OMAP_APOLLON_PLUS is not set
+
+#
+# Boot options
+#
+
+#
+# Power management
+#
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_ARM926T=y
+CONFIG_CPU_32v5=y
+CONFIG_CPU_ABRT_EV5TJ=y
+CONFIG_CPU_PABRT_NOIFAR=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_COPY_V4WB=y
+CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+# CONFIG_ARM_THUMB is not set
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+CONFIG_CPU_DCACHE_WRITETHROUGH=y
+# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
+# CONFIG_OUTER_CACHE is not set
+
+#
+# Bus support
+#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+
+#
+# PCCARD (PCMCIA/CardBus) support
+#
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+# CONFIG_TICK_ONESHOT is not set
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+# CONFIG_PREEMPT is not set
+CONFIG_HZ=100
+# CONFIG_AEABI is not set
+# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
+# CONFIG_LEDS is not set
+CONFIG_ALIGNMENT_TRAP=y
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="mem=32M console=tty0 console=ttyS0,115200 initrd=0x10200000,8M root=/dev/ram0 rw"
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# CPU Frequency scaling
+#
+# CONFIG_CPU_FREQ is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_FPE_NWFPE=y
+# CONFIG_FPE_NWFPE_XP is not set
+# CONFIG_FPE_FASTFPE is not set
+# CONFIG_VFP is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+# CONFIG_ARTHUR is not set
+
+#
+# Power management options
+#
+# CONFIG_PM is not set
+CONFIG_SUSPEND_UP_POSSIBLE=y
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=m
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_IP_MROUTE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
+# CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_FW_LOADER is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+# CONFIG_MTD is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=8192
+CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_PHYLIB is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_AX88796 is not set
+CONFIG_SMC91X=y
+# CONFIG_DM9000 is not set
+CONFIG_NETDEV_1000=y
+CONFIG_NETDEV_10000=y
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+# CONFIG_WAN is not set
+CONFIG_PPP=y
+CONFIG_PPP_MULTILINK=y
+# CONFIG_PPP_FILTER is not set
+# CONFIG_PPP_ASYNC is not set
+# CONFIG_PPP_SYNC_TTY is not set
+# CONFIG_PPP_DEFLATE is not set
+# CONFIG_PPP_BSDCOMP is not set
+# CONFIG_PPP_MPPE is not set
+# CONFIG_PPPOE is not set
+# CONFIG_PPPOL2TP is not set
+# CONFIG_SLIP is not set
+CONFIG_SLHC=y
+# CONFIG_SHAPER is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+CONFIG_INPUT_MOUSEDEV_PSAUX=y
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_TSDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ATKBD is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+CONFIG_KEYBOARD_OMAP=y
+# CONFIG_KEYBOARD_GPIO is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+CONFIG_SERIO_SERPORT=y
+# CONFIG_SERIO_RAW is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_NR_UARTS=4
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
+# CONFIG_SERIAL_8250_EXTENDED is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_HW_RANDOM=m
+CONFIG_HW_RANDOM_OMAP=m
+# CONFIG_NVRAM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+# CONFIG_I2C is not set
+
+#
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+# CONFIG_W1 is not set
+CONFIG_HWMON=y
+# CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_ABITUGURU is not set
+# CONFIG_SENSORS_ABITUGURU3 is not set
+# CONFIG_SENSORS_F71805F is not set
+# CONFIG_SENSORS_IT87 is not set
+# CONFIG_SENSORS_PC87360 is not set
+# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_SMSC47M1 is not set
+# CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_VT1211 is not set
+# CONFIG_SENSORS_W83627HF is not set
+# CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_EEPROM_93CX6 is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_SM501 is not set
+# CONFIG_NEW_LEDS is not set
+
+#
+# Multimedia devices
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+CONFIG_DAB=y
+
+#
+# Graphics support
+#
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+# CONFIG_VGASTATE is not set
+CONFIG_VIDEO_OUTPUT_CONTROL=m
+CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
+# CONFIG_FB_CFB_FILLRECT is not set
+# CONFIG_FB_CFB_COPYAREA is not set
+# CONFIG_FB_CFB_IMAGEBLIT is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_SYS_FOPS is not set
+CONFIG_FB_DEFERRED_IO=y
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+CONFIG_FB_MODE_HELPERS=y
+# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_S1D13XXX is not set
+CONFIG_FB_OMAP=y
+# CONFIG_FB_OMAP_LCDC_EXTERNAL is not set
+# CONFIG_FB_OMAP_BOOTLOADER_INIT is not set
+CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE=2
+# CONFIG_FB_OMAP_DMA_TUNE is not set
+# CONFIG_FB_VIRTUAL is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
+CONFIG_FONTS=y
+CONFIG_FONT_8x8=y
+CONFIG_FONT_8x16=y
+# CONFIG_FONT_6x11 is not set
+# CONFIG_FONT_7x14 is not set
+# CONFIG_FONT_PEARL_8x8 is not set
+# CONFIG_FONT_ACORN_8x8 is not set
+# CONFIG_FONT_MINI_4x6 is not set
+# CONFIG_FONT_SUN8x16 is not set
+# CONFIG_FONT_SUN12x22 is not set
+# CONFIG_FONT_10x18 is not set
+CONFIG_LOGO=y
+CONFIG_LOGO_LINUX_MONO=y
+CONFIG_LOGO_LINUX_VGA16=y
+CONFIG_LOGO_LINUX_CLUT224=y
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+CONFIG_HID_DEBUG=y
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+# CONFIG_USB is not set
+
+#
+# Enable Host or Gadget support to see Inventra options
+#
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# USB Gadget Support
+#
+# CONFIG_USB_GADGET is not set
+# CONFIG_MMC is not set
+CONFIG_RTC_LIB=y
+# CONFIG_RTC_CLASS is not set
+
+#
+# DMA Engine support
+#
+# CONFIG_DMA_ENGINE is not set
+
+#
+# DMA Clients
+#
+
+#
+# DMA Devices
+#
+
+#
+# CBUS support
+#
+# CONFIG_CBUS is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4DEV_FS is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+CONFIG_DNOTIFY=y
+CONFIG_AUTOFS_FS=y
+CONFIG_AUTOFS4_FS=y
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+# CONFIG_TMPFS is not set
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_RAMFS=y
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+
+#
+# Network File Systems
+#
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+# CONFIG_NFS_V4 is not set
+# CONFIG_NFS_DIRECTIO is not set
+# CONFIG_NFSD is not set
+# CONFIG_ROOT_NFS is not set
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_SUNRPC_BIND34 is not set
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+
+#
+# Native Language Support
+#
+# CONFIG_NLS is not set
+
+#
+# Distributed Lock Manager
+#
+# CONFIG_DLM is not set
+
+#
+# Profiling support
+#
+# CONFIG_PROFILING is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_MUST_CHECK=y
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_KERNEL is not set
+# CONFIG_SLUB_DEBUG_ON is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_FRAME_POINTER=y
+# CONFIG_DEBUG_USER is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_CRYPTO is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/omap_osk_5912_defconfig b/arch/arm/configs/omap_osk_5912_defconfig
index d4ca5e6e4ffa..b68e0144cab5 100644
--- a/arch/arm/configs/omap_osk_5912_defconfig
+++ b/arch/arm/configs/omap_osk_5912_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.25-rc3
-# Mon Mar  3 03:35:17 2008
+# Linux kernel version: 2.6.24-rc3-omap1
+# Fri Nov 23 12:24:12 2007
 #
 CONFIG_ARM=y
 CONFIG_SYS_SUPPORTS_APM_EMULATION=y
@@ -21,7 +21,6 @@ CONFIG_RWSEM_GENERIC_SPINLOCK=y
 # CONFIG_ARCH_HAS_ILOG2_U64 is not set
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ARCH_SUPPORTS_AOUT=y
 CONFIG_ZONE_DMA=y
 CONFIG_VECTORS_BASE=0xffff0000
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
@@ -40,22 +39,17 @@ CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_POSIX_MQUEUE is not set
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
 # CONFIG_AUDIT is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_CGROUPS is not set
-CONFIG_GROUP_SCHED=y
 CONFIG_FAIR_GROUP_SCHED=y
-# CONFIG_RT_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
-# CONFIG_SYSFS_DEPRECATED is not set
+CONFIG_FAIR_USER_SCHED=y
+# CONFIG_FAIR_CGROUP_SCHED is not set
+CONFIG_SYSFS_DEPRECATED=y
 # CONFIG_RELAY is not set
-CONFIG_NAMESPACES=y
-# CONFIG_UTS_NS is not set
-# CONFIG_IPC_NS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
 CONFIG_CC_OPTIMIZE_FOR_SIZE=y
@@ -69,26 +63,18 @@ CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
 CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
 CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_SLAB=y
-# CONFIG_SLUB is not set
+CONFIG_SLUB_DEBUG=y
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
 # CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
@@ -116,8 +102,6 @@ CONFIG_IOSCHED_CFQ=y
 CONFIG_DEFAULT_CFQ=y
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="cfq"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_PREEMPT_RCU is not set
 
 #
 # System Type
@@ -146,7 +130,6 @@ CONFIG_CLASSIC_RCU=y
 # CONFIG_ARCH_KS8695 is not set
 # CONFIG_ARCH_NS9XXX is not set
 # CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_ORION is not set
 # CONFIG_ARCH_PNX4008 is not set
 # CONFIG_ARCH_PXA is not set
 # CONFIG_ARCH_RPC is not set
@@ -156,7 +139,6 @@ CONFIG_CLASSIC_RCU=y
 # CONFIG_ARCH_LH7A40X is not set
 # CONFIG_ARCH_DAVINCI is not set
 CONFIG_ARCH_OMAP=y
-# CONFIG_ARCH_MSM7X00A is not set
 
 #
 # TI OMAP Implementations
@@ -164,16 +146,22 @@ CONFIG_ARCH_OMAP=y
 CONFIG_ARCH_OMAP_OTG=y
 CONFIG_ARCH_OMAP1=y
 # CONFIG_ARCH_OMAP2 is not set
+# CONFIG_ARCH_OMAP3 is not set
 
 #
 # OMAP Feature Selections
 #
+CONFIG_OMAP_DEBUG_SRAM_PATCH=y
 CONFIG_OMAP_RESET_CLOCKS=y
+# CONFIG_OMAP_BOOT_TAG is not set
+# CONFIG_OMAP_GPIO_SWITCH is not set
 CONFIG_OMAP_MUX=y
 # CONFIG_OMAP_MUX_DEBUG is not set
 CONFIG_OMAP_MUX_WARNINGS=y
+# CONFIG_OMAP_STI is not set
 CONFIG_OMAP_MCBSP=y
 # CONFIG_OMAP_MMU_FWK is not set
+# CONFIG_OMAP_MBOX_FWK is not set
 # CONFIG_OMAP_MPU_TIMER is not set
 CONFIG_OMAP_32K_TIMER=y
 CONFIG_OMAP_32K_TIMER_HZ=128
@@ -182,6 +170,7 @@ CONFIG_OMAP_LL_DEBUG_UART1=y
 # CONFIG_OMAP_LL_DEBUG_UART2 is not set
 # CONFIG_OMAP_LL_DEBUG_UART3 is not set
 CONFIG_OMAP_SERIAL_WAKE=y
+# CONFIG_OMAP_DSP is not set
 
 #
 # OMAP Core Type
@@ -193,13 +182,13 @@ CONFIG_ARCH_OMAP16XX=y
 #
 # OMAP Board Type
 #
-CONFIG_MACH_OMAP_INNOVATOR=y
-CONFIG_MACH_OMAP_H2=y
-CONFIG_MACH_OMAP_H3=y
+# CONFIG_MACH_OMAP_INNOVATOR is not set
+# CONFIG_MACH_OMAP_H2 is not set
+# CONFIG_MACH_OMAP_H3 is not set
 CONFIG_MACH_OMAP_OSK=y
 # CONFIG_OMAP_OSK_MISTRAL is not set
-CONFIG_MACH_NOKIA770=y
-CONFIG_MACH_OMAP_GENERIC=y
+# CONFIG_MACH_NOKIA770 is not set
+# CONFIG_MACH_OMAP_GENERIC is not set
 
 #
 # OMAP CPU Speed
@@ -227,6 +216,7 @@ CONFIG_CPU_32=y
 CONFIG_CPU_ARM926T=y
 CONFIG_CPU_32v5=y
 CONFIG_CPU_ABRT_EV5TJ=y
+CONFIG_CPU_PABRT_NOIFAR=y
 CONFIG_CPU_CACHE_VIVT=y
 CONFIG_CPU_COPY_V4WB=y
 CONFIG_CPU_TLB_V4WBI=y
@@ -264,12 +254,11 @@ CONFIG_OMAP_CF=y
 #
 CONFIG_TICK_ONESHOT=y
 CONFIG_NO_HZ=y
-CONFIG_HIGH_RES_TIMERS=y
+# CONFIG_HIGH_RES_TIMERS is not set
 CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
 # CONFIG_PREEMPT is not set
 CONFIG_HZ=128
-CONFIG_AEABI=y
-CONFIG_OABI_COMPAT=y
+# CONFIG_AEABI is not set
 # CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
 CONFIG_SELECT_MEMORY_MODEL=y
 CONFIG_FLATMEM_MANUAL=y
@@ -295,7 +284,6 @@ CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="mem=32M console=ttyS0,115200 initrd=0x10400000,8M root=/dev/ram0 rw"
 # CONFIG_XIP_KERNEL is not set
 # CONFIG_KEXEC is not set
-# CONFIG_ATAGS_PROC is not set
 
 #
 # CPU Frequency scaling
@@ -320,6 +308,7 @@ CONFIG_FPE_NWFPE=y
 CONFIG_BINFMT_ELF=y
 # CONFIG_BINFMT_AOUT is not set
 # CONFIG_BINFMT_MISC is not set
+# CONFIG_ARTHUR is not set
 
 #
 # Power management options
@@ -328,10 +317,9 @@ CONFIG_PM=y
 # CONFIG_PM_LEGACY is not set
 # CONFIG_PM_DEBUG is not set
 CONFIG_PM_SLEEP=y
+CONFIG_SUSPEND_UP_POSSIBLE=y
 CONFIG_SUSPEND=y
-CONFIG_SUSPEND_FREEZER=y
 # CONFIG_APM_EMULATION is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
 
 #
 # Networking
@@ -348,7 +336,6 @@ CONFIG_XFRM=y
 # CONFIG_XFRM_USER is not set
 # CONFIG_XFRM_SUB_POLICY is not set
 # CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
 # CONFIG_NET_KEY is not set
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
@@ -404,7 +391,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 #
 # CONFIG_NET_PKTGEN is not set
 # CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
@@ -517,13 +503,11 @@ CONFIG_BLK_DEV_LOOP=y
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=8192
-# CONFIG_BLK_DEV_XIP is not set
+CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_EEPROM_93CX6 is not set
-# CONFIG_ENCLOSURE_SERVICES is not set
-CONFIG_HAVE_IDE=y
 CONFIG_IDE=m
 CONFIG_BLK_DEV_IDE=m
 
@@ -545,6 +529,7 @@ CONFIG_IDE_PROC_FS=y
 #
 # CONFIG_IDE_GENERIC is not set
 # CONFIG_BLK_DEV_PLATFORM is not set
+# CONFIG_IDE_ARM is not set
 # CONFIG_BLK_DEV_IDEDMA is not set
 CONFIG_IDE_ARCH_OBSOLETE_INIT=y
 # CONFIG_BLK_DEV_HD is not set
@@ -578,7 +563,6 @@ CONFIG_SMC91X=y
 # CONFIG_IBM_NEW_EMAC_EMAC4 is not set
 # CONFIG_B44 is not set
 CONFIG_NETDEV_1000=y
-# CONFIG_E1000E_ENABLED is not set
 CONFIG_NETDEV_10000=y
 
 #
@@ -600,6 +584,7 @@ CONFIG_PPP_MULTILINK=y
 # CONFIG_PPPOL2TP is not set
 # CONFIG_SLIP is not set
 CONFIG_SLHC=y
+# CONFIG_SHAPER is not set
 # CONFIG_NETCONSOLE is not set
 # CONFIG_NETPOLL is not set
 # CONFIG_NET_POLL_CONTROLLER is not set
@@ -696,7 +681,6 @@ CONFIG_HW_RANDOM_OMAP=m
 # CONFIG_SYNCLINK_CS is not set
 # CONFIG_CARDMAN_4000 is not set
 # CONFIG_CARDMAN_4040 is not set
-# CONFIG_IPWIRELESS is not set
 # CONFIG_RAW_DRIVER is not set
 # CONFIG_TCG_TPM is not set
 CONFIG_I2C=y
@@ -724,13 +708,17 @@ CONFIG_I2C_OMAP=y
 #
 # Miscellaneous I2C Chip support
 #
+# CONFIG_SENSORS_DS1337 is not set
+# CONFIG_SENSORS_DS1374 is not set
 # CONFIG_DS1682 is not set
 # CONFIG_SENSORS_EEPROM is not set
 # CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_ISP1301_OMAP is not set
 CONFIG_TPS65010=y
+# CONFIG_SENSORS_TLV320AIC23 is not set
+# CONFIG_GPIOEXPANDER_OMAP is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
@@ -755,7 +743,6 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_ADM1031 is not set
 # CONFIG_SENSORS_ADM9240 is not set
 # CONFIG_SENSORS_ADT7470 is not set
-# CONFIG_SENSORS_ADT7473 is not set
 # CONFIG_SENSORS_ATXP1 is not set
 # CONFIG_SENSORS_DS1621 is not set
 # CONFIG_SENSORS_F71805F is not set
@@ -783,7 +770,6 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_SMSC47M1 is not set
 # CONFIG_SENSORS_SMSC47M192 is not set
 # CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_ADS7828 is not set
 # CONFIG_SENSORS_THMC50 is not set
 # CONFIG_SENSORS_VT1211 is not set
 # CONFIG_SENSORS_W83781D is not set
@@ -791,7 +777,6 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_W83792D is not set
 # CONFIG_SENSORS_W83793 is not set
 # CONFIG_SENSORS_W83L785TS is not set
-# CONFIG_SENSORS_W83L786NG is not set
 # CONFIG_SENSORS_W83627HF is not set
 # CONFIG_SENSORS_W83627EHF is not set
 # CONFIG_HWMON_DEBUG_CHIP is not set
@@ -807,7 +792,6 @@ CONFIG_SSB_POSSIBLE=y
 # Multifunction device drivers
 #
 # CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_ASIC3 is not set
 
 #
 # Multimedia devices
@@ -822,11 +806,11 @@ CONFIG_DAB=y
 # CONFIG_VGASTATE is not set
 CONFIG_VIDEO_OUTPUT_CONTROL=m
 CONFIG_FB=y
-CONFIG_FIRMWARE_EDID=y
+# CONFIG_FIRMWARE_EDID is not set
 # CONFIG_FB_DDC is not set
-# CONFIG_FB_CFB_FILLRECT is not set
-# CONFIG_FB_CFB_COPYAREA is not set
-# CONFIG_FB_CFB_IMAGEBLIT is not set
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
 # CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
 # CONFIG_FB_SYS_FILLRECT is not set
 # CONFIG_FB_SYS_COPYAREA is not set
@@ -844,7 +828,11 @@ CONFIG_FB_MODE_HELPERS=y
 #
 # CONFIG_FB_S1D13XXX is not set
 # CONFIG_FB_VIRTUAL is not set
-# CONFIG_FB_OMAP is not set
+CONFIG_FB_OMAP=y
+# CONFIG_FB_OMAP_LCDC_EXTERNAL is not set
+# CONFIG_FB_OMAP_BOOTLOADER_INIT is not set
+CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE=2
+# CONFIG_FB_OMAP_DMA_TUNE is not set
 # CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
@@ -891,8 +879,16 @@ CONFIG_USB_ARCH_HAS_OHCI=y
 # CONFIG_USB is not set
 
 #
+# Enable Host or Gadget support to see Inventra options
+#
+
+#
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
 #
+
+#
+# USB Gadget Support
+#
 # CONFIG_USB_GADGET is not set
 # CONFIG_MMC is not set
 # CONFIG_NEW_LEDS is not set
@@ -900,6 +896,11 @@ CONFIG_RTC_LIB=y
 # CONFIG_RTC_CLASS is not set
 
 #
+# CBUS support
+#
+# CONFIG_CBUS is not set
+
+#
 # File systems
 #
 CONFIG_EXT2_FS=y
@@ -913,10 +914,12 @@ CONFIG_EXT2_FS=y
 # CONFIG_XFS_FS is not set
 # CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
-CONFIG_DNOTIFY=y
+# CONFIG_MINIX_FS is not set
+# CONFIG_ROMFS_FS is not set
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
+CONFIG_DNOTIFY=y
 CONFIG_AUTOFS_FS=y
 CONFIG_AUTOFS4_FS=y
 # CONFIG_FUSE_FS is not set
@@ -970,10 +973,8 @@ CONFIG_JFFS2_RTIME=y
 # CONFIG_JFFS2_RUBIN is not set
 # CONFIG_CRAMFS is not set
 # CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
@@ -1043,6 +1044,9 @@ CONFIG_NLS_ISO8859_1=m
 # CONFIG_NLS_KOI8_U is not set
 # CONFIG_NLS_UTF8 is not set
 # CONFIG_DLM is not set
+CONFIG_INSTRUMENTATION=y
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
 
 #
 # Kernel hacking
@@ -1055,6 +1059,7 @@ CONFIG_ENABLE_MUST_CHECK=y
 # CONFIG_DEBUG_FS is not set
 # CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
+# CONFIG_SLUB_DEBUG_ON is not set
 CONFIG_DEBUG_BUGVERBOSE=y
 CONFIG_FRAME_POINTER=y
 # CONFIG_SAMPLES is not set
@@ -1066,51 +1071,7 @@ CONFIG_FRAME_POINTER=y
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
 # CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_CRYPTO=y
-# CONFIG_CRYPTO_SEQIV is not set
-# CONFIG_CRYPTO_MANAGER is not set
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_MD4 is not set
-# CONFIG_CRYPTO_MD5 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_ECB is not set
-# CONFIG_CRYPTO_CBC is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_XTS is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_TEST is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_LZO is not set
-CONFIG_CRYPTO_HW=y
+# CONFIG_CRYPTO is not set
 
 #
 # Library routines
diff --git a/arch/arm/configs/omap_perseus2_730_defconfig b/arch/arm/configs/omap_perseus2_730_defconfig
new file mode 100644
index 000000000000..b94800c0e000
--- /dev/null
+++ b/arch/arm/configs/omap_perseus2_730_defconfig
@@ -0,0 +1,928 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.23-rc6-omap1
+# Tue Sep 18 11:45:12 2007
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_MMU=y
+# CONFIG_NO_IOPORT is not set
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_ZONE_DMA=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_AUDIT is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_SYSFS_DEPRECATED=y
+# CONFIG_RELAY is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+# CONFIG_EMBEDDED is not set
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+
+#
+# System Type
+#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS7500 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_CO285 is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_DAVINCI is not set
+CONFIG_ARCH_OMAP=y
+
+#
+# TI OMAP Implementations
+#
+CONFIG_ARCH_OMAP_OTG=y
+CONFIG_ARCH_OMAP1=y
+# CONFIG_ARCH_OMAP2 is not set
+# CONFIG_ARCH_OMAP3 is not set
+
+#
+# OMAP Feature Selections
+#
+# CONFIG_OMAP_RESET_CLOCKS is not set
+# CONFIG_OMAP_BOOT_TAG is not set
+# CONFIG_OMAP_GPIO_SWITCH is not set
+CONFIG_OMAP_MUX=y
+# CONFIG_OMAP_MUX_DEBUG is not set
+CONFIG_OMAP_MUX_WARNINGS=y
+CONFIG_OMAP_MCBSP=y
+# CONFIG_OMAP_MMU_FWK is not set
+# CONFIG_OMAP_MBOX_FWK is not set
+CONFIG_OMAP_MPU_TIMER=y
+# CONFIG_OMAP_32K_TIMER is not set
+CONFIG_OMAP_LL_DEBUG_UART1=y
+# CONFIG_OMAP_LL_DEBUG_UART2 is not set
+# CONFIG_OMAP_LL_DEBUG_UART3 is not set
+CONFIG_OMAP_SERIAL_WAKE=y
+
+#
+# OMAP Core Type
+#
+CONFIG_ARCH_OMAP730=y
+# CONFIG_ARCH_OMAP15XX is not set
+# CONFIG_ARCH_OMAP16XX is not set
+
+#
+# OMAP Board Type
+#
+CONFIG_MACH_OMAP_PERSEUS2=y
+# CONFIG_MACH_OMAP_FSAMPLE is not set
+
+#
+# OMAP CPU Speed
+#
+# CONFIG_OMAP_CLOCKS_SET_BY_BOOTLOADER is not set
+# CONFIG_OMAP_ARM_195MHZ is not set
+CONFIG_OMAP_ARM_182MHZ=y
+# CONFIG_OMAP_ARM_168MHZ is not set
+# CONFIG_OMAP_ARM_120MHZ is not set
+# CONFIG_OMAP_ARM_60MHZ is not set
+# CONFIG_OMAP_ARM_30MHZ is not set
+# CONFIG_MACH_OMAP_APOLLON_PLUS is not set
+
+#
+# Boot options
+#
+
+#
+# Power management
+#
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_ARM926T=y
+CONFIG_CPU_32v5=y
+CONFIG_CPU_ABRT_EV5TJ=y
+CONFIG_CPU_PABRT_NOIFAR=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_COPY_V4WB=y
+CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+# CONFIG_ARM_THUMB is not set
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
+# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
+# CONFIG_OUTER_CACHE is not set
+
+#
+# Bus support
+#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+
+#
+# PCCARD (PCMCIA/CardBus) support
+#
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+# CONFIG_TICK_ONESHOT is not set
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_PREEMPT=y
+CONFIG_HZ=100
+# CONFIG_AEABI is not set
+# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
+CONFIG_LEDS=y
+CONFIG_LEDS_CPU=y
+CONFIG_ALIGNMENT_TRAP=y
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="mem=32M console=ttyS0,115200 ip=dhcp"
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# CPU Frequency scaling
+#
+# CONFIG_CPU_FREQ is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_FPE_NWFPE=y
+# CONFIG_FPE_NWFPE_XP is not set
+# CONFIG_FPE_FASTFPE is not set
+# CONFIG_VFP is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+# CONFIG_ARTHUR is not set
+
+#
+# Power management options
+#
+CONFIG_PM=y
+# CONFIG_PM_LEGACY is not set
+# CONFIG_PM_DEBUG is not set
+CONFIG_PM_SLEEP=y
+CONFIG_SUSPEND_UP_POSSIBLE=y
+CONFIG_SUSPEND=y
+# CONFIG_APM_EMULATION is not set
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_IP_MROUTE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
+# CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_FW_LOADER is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_AFS_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+CONFIG_MTD_CFI_INTELEXT=y
+# CONFIG_MTD_CFI_AMDSTD is not set
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_PHYSMAP is not set
+# CONFIG_MTD_ARM_INTEGRATOR is not set
+CONFIG_MTD_OMAP_NOR=y
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+CONFIG_MTD_NAND=y
+# CONFIG_MTD_NAND_VERIFY_WRITE is not set
+# CONFIG_MTD_NAND_ECC_SMC is not set
+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
+CONFIG_MTD_NAND_OMAP=y
+CONFIG_MTD_NAND_IDS=y
+# CONFIG_MTD_NAND_DISKONCHIP is not set
+# CONFIG_MTD_NAND_NANDSIM is not set
+# CONFIG_MTD_NAND_PLATFORM is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=8192
+CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_PHYLIB is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_AX88796 is not set
+CONFIG_SMC91X=y
+# CONFIG_DM9000 is not set
+CONFIG_NETDEV_1000=y
+CONFIG_NETDEV_10000=y
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+# CONFIG_WAN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_SHAPER is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+CONFIG_INPUT_MOUSEDEV_PSAUX=y
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_TSDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ATKBD is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+CONFIG_KEYBOARD_OMAP=y
+# CONFIG_KEYBOARD_GPIO is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+CONFIG_SERIO_SERPORT=y
+# CONFIG_SERIO_RAW is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_NR_UARTS=4
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
+# CONFIG_SERIAL_8250_EXTENDED is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_HW_RANDOM=m
+# CONFIG_NVRAM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+# CONFIG_I2C is not set
+
+#
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+# CONFIG_W1 is not set
+CONFIG_HWMON=y
+# CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_ABITUGURU is not set
+# CONFIG_SENSORS_ABITUGURU3 is not set
+# CONFIG_SENSORS_F71805F is not set
+# CONFIG_SENSORS_IT87 is not set
+# CONFIG_SENSORS_PC87360 is not set
+# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_SMSC47M1 is not set
+# CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_VT1211 is not set
+# CONFIG_SENSORS_W83627HF is not set
+# CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_EEPROM_93CX6 is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_SM501 is not set
+# CONFIG_NEW_LEDS is not set
+
+#
+# Multimedia devices
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+CONFIG_DAB=y
+
+#
+# Graphics support
+#
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+# CONFIG_VGASTATE is not set
+CONFIG_VIDEO_OUTPUT_CONTROL=m
+CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
+# CONFIG_FB_CFB_FILLRECT is not set
+# CONFIG_FB_CFB_COPYAREA is not set
+# CONFIG_FB_CFB_IMAGEBLIT is not set
+CONFIG_FB_SYS_FILLRECT=y
+CONFIG_FB_SYS_COPYAREA=y
+CONFIG_FB_SYS_IMAGEBLIT=y
+CONFIG_FB_SYS_FOPS=y
+CONFIG_FB_DEFERRED_IO=y
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+CONFIG_FB_MODE_HELPERS=y
+# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_S1D13XXX is not set
+# CONFIG_FB_OMAP is not set
+CONFIG_FB_VIRTUAL=y
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE is not set
+# CONFIG_LOGO is not set
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+# CONFIG_HID_DEBUG is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+# CONFIG_USB is not set
+
+#
+# Enable Host or Gadget support to see Inventra options
+#
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# USB Gadget Support
+#
+# CONFIG_USB_GADGET is not set
+# CONFIG_MMC is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# SPI RTC drivers
+#
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+CONFIG_RTC_DRV_OMAP=y
+
+#
+# DMA Engine support
+#
+# CONFIG_DMA_ENGINE is not set
+
+#
+# DMA Clients
+#
+
+#
+# DMA Devices
+#
+
+#
+# CBUS support
+#
+# CONFIG_CBUS is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4DEV_FS is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+CONFIG_DNOTIFY=y
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+# CONFIG_TMPFS is not set
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_RAMFS=y
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_XATTR is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+
+#
+# Network File Systems
+#
+CONFIG_NFS_FS=y
+# CONFIG_NFS_V3 is not set
+# CONFIG_NFS_V4 is not set
+# CONFIG_NFS_DIRECTIO is not set
+# CONFIG_NFSD is not set
+CONFIG_ROOT_NFS=y
+CONFIG_LOCKD=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_SUNRPC_BIND34 is not set
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+
+#
+# Native Language Support
+#
+# CONFIG_NLS is not set
+
+#
+# Distributed Lock Manager
+#
+# CONFIG_DLM is not set
+
+#
+# Profiling support
+#
+# CONFIG_PROFILING is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_MUST_CHECK=y
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_KERNEL is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_FRAME_POINTER=y
+# CONFIG_DEBUG_USER is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_CRYPTO is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/orion5x_defconfig b/arch/arm/configs/orion5x_defconfig
index 9578b5d9f9c7..4017d83c9d2d 100644
--- a/arch/arm/configs/orion5x_defconfig
+++ b/arch/arm/configs/orion5x_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc4
-# Mon Jun  2 23:54:48 2008
+# Linux kernel version: 2.6.27-rc4
+# Fri Aug 22 12:38:51 2008
 #
 CONFIG_ARM=y
 CONFIG_SYS_SUPPORTS_APM_EMULATION=y
@@ -12,6 +12,7 @@ CONFIG_MMU=y
 # CONFIG_NO_IOPORT is not set
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 CONFIG_HARDIRQS_SW_RESEND=y
@@ -23,6 +24,7 @@ CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_ARCH_SUPPORTS_AOUT=y
 CONFIG_ZONE_DMA=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 CONFIG_VECTORS_BASE=0xffff0000
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
@@ -56,7 +58,6 @@ CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
 CONFIG_UID16=y
 CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
@@ -83,11 +84,17 @@ CONFIG_PROFILING=y
 CONFIG_OPROFILE=y
 CONFIG_HAVE_OPROFILE=y
 CONFIG_KPROBES=y
+# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
 CONFIG_KRETPROBES=y
+# CONFIG_HAVE_IOREMAP_PROT is not set
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
+# CONFIG_HAVE_ARCH_TRACEHOOK is not set
 # CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+# CONFIG_HAVE_CLK is not set
 CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
@@ -97,12 +104,13 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-# CONFIG_KMOD is not set
+CONFIG_KMOD=y
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -128,7 +136,6 @@ CONFIG_CLASSIC_RCU=y
 # CONFIG_ARCH_AT91 is not set
 # CONFIG_ARCH_CLPS7500 is not set
 # CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
 # CONFIG_ARCH_EBSA110 is not set
 # CONFIG_ARCH_EP93XX is not set
 # CONFIG_ARCH_FOOTBRIDGE is not set
@@ -142,8 +149,11 @@ CONFIG_CLASSIC_RCU=y
 # CONFIG_ARCH_IXP2000 is not set
 # CONFIG_ARCH_IXP4XX is not set
 # CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KIRKWOOD is not set
 # CONFIG_ARCH_KS8695 is not set
 # CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
 # CONFIG_ARCH_MXC is not set
 CONFIG_ARCH_ORION5X=y
 # CONFIG_ARCH_PNX4008 is not set
@@ -195,7 +205,7 @@ CONFIG_CPU_ABRT_EV5T=y
 CONFIG_CPU_PABRT_NOIFAR=y
 CONFIG_CPU_CACHE_VIVT=y
 CONFIG_CPU_COPY_FEROCEON=y
-CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CPU_TLB_FEROCEON=y
 CONFIG_CPU_CP15=y
 CONFIG_CPU_CP15_MMU=y
 
@@ -280,10 +290,6 @@ CONFIG_BINFMT_ELF=y
 #
 # CONFIG_PM is not set
 CONFIG_ARCH_SUSPEND_POSSIBLE=y
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -361,6 +367,7 @@ CONFIG_NET_PKTGEN=m
 #
 # CONFIG_CFG80211 is not set
 CONFIG_WIRELESS_EXT=y
+CONFIG_WIRELESS_EXT_SYSFS=y
 # CONFIG_MAC80211 is not set
 # CONFIG_IEEE80211 is not set
 # CONFIG_RFKILL is not set
@@ -377,6 +384,8 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=y
+# CONFIG_FIRMWARE_IN_KERNEL is not set
+CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_DEBUG_DRIVER is not set
 # CONFIG_DEBUG_DEVRES is not set
 # CONFIG_SYS_HYPERVISOR is not set
@@ -499,6 +508,7 @@ CONFIG_MISC_DEVICES=y
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_HP_ILO is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -575,6 +585,7 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_NSP32 is not set
 # CONFIG_SCSI_DEBUG is not set
 # CONFIG_SCSI_SRP is not set
+# CONFIG_SCSI_DH is not set
 CONFIG_ATA=y
 # CONFIG_ATA_NONSTANDARD is not set
 CONFIG_SATA_PMP=y
@@ -641,11 +652,14 @@ CONFIG_SATA_MV=y
 #
 # IEEE 1394 (FireWire) support
 #
+
+#
+# Enable only one of the two stacks, unless you know what you are doing
+#
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -694,7 +708,6 @@ CONFIG_NETDEV_1000=y
 # CONFIG_DL2K is not set
 # CONFIG_E1000 is not set
 # CONFIG_E1000E is not set
-# CONFIG_E1000E_ENABLED is not set
 # CONFIG_IP1000 is not set
 # CONFIG_IGB is not set
 # CONFIG_NS83820 is not set
@@ -710,6 +723,7 @@ CONFIG_NETDEV_1000=y
 CONFIG_MV643XX_ETH=y
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
+# CONFIG_ATL1E is not set
 # CONFIG_NETDEV_10000 is not set
 # CONFIG_TR is not set
 
@@ -757,7 +771,14 @@ CONFIG_INPUT_EVDEV=y
 #
 # Input Device Drivers
 #
-# CONFIG_INPUT_KEYBOARD is not set
+CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ATKBD is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+CONFIG_KEYBOARD_GPIO=y
 # CONFIG_INPUT_MOUSE is not set
 # CONFIG_INPUT_JOYSTICK is not set
 # CONFIG_INPUT_TABLET is not set
@@ -808,44 +829,65 @@ CONFIG_DEVPORT=y
 CONFIG_I2C=y
 CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
 
 #
 # I2C Hardware Bus support
 #
+
+#
+# PC SMBus host controller drivers
+#
 # CONFIG_I2C_ALI1535 is not set
 # CONFIG_I2C_ALI1563 is not set
 # CONFIG_I2C_ALI15X3 is not set
 # CONFIG_I2C_AMD756 is not set
 # CONFIG_I2C_AMD8111 is not set
-# CONFIG_I2C_GPIO is not set
 # CONFIG_I2C_I801 is not set
-# CONFIG_I2C_I810 is not set
+# CONFIG_I2C_ISCH is not set
 # CONFIG_I2C_PIIX4 is not set
 # CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_PROSAVAGE is not set
-# CONFIG_I2C_SAVAGE4 is not set
-# CONFIG_I2C_SIMTEC is not set
 # CONFIG_I2C_SIS5595 is not set
 # CONFIG_I2C_SIS630 is not set
 # CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_TINY_USB is not set
 # CONFIG_I2C_VIA is not set
 # CONFIG_I2C_VIAPRO is not set
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+# CONFIG_I2C_GPIO is not set
+CONFIG_I2C_MV64XXX=y
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Graphics adapter I2C/DDC channel drivers
+#
 # CONFIG_I2C_VOODOO3 is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
 # CONFIG_I2C_PCA_PLATFORM is not set
-CONFIG_I2C_MV64XXX=y
+# CONFIG_I2C_STUB is not set
 
 #
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
+# CONFIG_AT24 is not set
 # CONFIG_SENSORS_EEPROM is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
@@ -858,6 +900,7 @@ CONFIG_I2C_MV64XXX=y
 # CONFIG_POWER_SUPPLY is not set
 CONFIG_HWMON=y
 # CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_AD7414 is not set
 # CONFIG_SENSORS_AD7418 is not set
 # CONFIG_SENSORS_ADM1021 is not set
 # CONFIG_SENSORS_ADM1025 is not set
@@ -877,7 +920,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_GL520SM is not set
 # CONFIG_SENSORS_IT87 is not set
 # CONFIG_SENSORS_LM63 is not set
-# CONFIG_SENSORS_LM75 is not set
+CONFIG_SENSORS_LM75=y
 # CONFIG_SENSORS_LM77 is not set
 # CONFIG_SENSORS_LM78 is not set
 # CONFIG_SENSORS_LM80 is not set
@@ -921,9 +964,12 @@ CONFIG_SSB_POSSIBLE=y
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_ASIC3 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_T7L66XB is not set
+# CONFIG_MFD_TC6387XB is not set
 
 #
 # Multimedia devices
@@ -954,10 +1000,6 @@ CONFIG_SSB_POSSIBLE=y
 # Display device support
 #
 # CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Sound
-#
 # CONFIG_SOUND is not set
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
@@ -988,6 +1030,7 @@ CONFIG_USB_DEVICE_CLASS=y
 # CONFIG_USB_OTG is not set
 # CONFIG_USB_OTG_WHITELIST is not set
 # CONFIG_USB_OTG_BLACKLIST_HUB is not set
+# CONFIG_USB_MON is not set
 
 #
 # USB Host Controller Drivers
@@ -1030,6 +1073,7 @@ CONFIG_USB_STORAGE_JUMPSHOT=y
 # CONFIG_USB_STORAGE_ALAUDA is not set
 # CONFIG_USB_STORAGE_ONETOUCH is not set
 # CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_SIERRA is not set
 # CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
 # CONFIG_USB_LIBUSUAL is not set
 
@@ -1038,7 +1082,6 @@ CONFIG_USB_STORAGE_JUMPSHOT=y
 #
 # CONFIG_USB_MDC800 is not set
 # CONFIG_USB_MICROTEK is not set
-# CONFIG_USB_MON is not set
 
 #
 # USB port drivers
@@ -1051,7 +1094,6 @@ CONFIG_USB_STORAGE_JUMPSHOT=y
 # CONFIG_USB_EMI62 is not set
 # CONFIG_USB_EMI26 is not set
 # CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_AUERSWALD is not set
 # CONFIG_USB_RIO500 is not set
 # CONFIG_USB_LEGOTOWER is not set
 # CONFIG_USB_LCD is not set
@@ -1077,7 +1119,9 @@ CONFIG_LEDS_CLASS=y
 #
 # LED drivers
 #
+# CONFIG_LEDS_PCA9532 is not set
 CONFIG_LEDS_GPIO=y
+# CONFIG_LEDS_PCA955X is not set
 
 #
 # LED Triggers
@@ -1111,11 +1155,12 @@ CONFIG_RTC_DRV_DS1307=y
 CONFIG_RTC_DRV_RS5C372=y
 # CONFIG_RTC_DRV_ISL1208 is not set
 # CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
+CONFIG_RTC_DRV_PCF8563=y
 # CONFIG_RTC_DRV_PCF8583 is not set
 CONFIG_RTC_DRV_M41T80=y
 # CONFIG_RTC_DRV_M41T80_WDT is not set
-# CONFIG_RTC_DRV_S35390A is not set
+CONFIG_RTC_DRV_S35390A=y
+# CONFIG_RTC_DRV_FM3130 is not set
 
 #
 # SPI RTC drivers
@@ -1136,6 +1181,27 @@ CONFIG_RTC_DRV_M41T80=y
 #
 # on-CPU RTC drivers
 #
+CONFIG_DMADEVICES=y
+
+#
+# DMA Devices
+#
+CONFIG_MV_XOR=y
+CONFIG_DMA_ENGINE=y
+
+#
+# DMA Clients
+#
+# CONFIG_NET_DMA is not set
+# CONFIG_DMATEST is not set
+
+#
+# Voltage and Current regulators
+#
+# CONFIG_REGULATOR is not set
+# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
+# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
+# CONFIG_REGULATOR_BQ24022 is not set
 # CONFIG_UIO is not set
 
 #
@@ -1215,6 +1281,7 @@ CONFIG_JFFS2_RTIME=y
 CONFIG_CRAMFS=y
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
 # CONFIG_ROMFS_FS is not set
@@ -1225,13 +1292,12 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 # CONFIG_NFS_V4 is not set
-# CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -1317,6 +1383,8 @@ CONFIG_MAGIC_SYSRQ=y
 CONFIG_DEBUG_KERNEL=y
 # CONFIG_DEBUG_SHIRQ is not set
 CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
 CONFIG_SCHED_DEBUG=y
 CONFIG_SCHEDSTATS=y
 # CONFIG_TIMER_STATS is not set
@@ -1331,11 +1399,13 @@ CONFIG_DEBUG_PREEMPT=y
 # CONFIG_LOCK_STAT is not set
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
 # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+CONFIG_STACKTRACE=y
 # CONFIG_DEBUG_KOBJECT is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
 CONFIG_DEBUG_INFO=y
 # CONFIG_DEBUG_VM is not set
 # CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 CONFIG_FRAME_POINTER=y
@@ -1345,7 +1415,18 @@ CONFIG_FRAME_POINTER=y
 # CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_LKDTM is not set
 # CONFIG_FAULT_INJECTION is not set
+CONFIG_LATENCYTOP=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+# CONFIG_FTRACE is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_PREEMPT_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
 # CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
 CONFIG_DEBUG_USER=y
 CONFIG_DEBUG_ERRORS=y
 # CONFIG_DEBUG_STACK_USAGE is not set
@@ -1358,6 +1439,7 @@ CONFIG_DEBUG_LL=y
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
 # CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_ASYNC_CORE=y
 CONFIG_CRYPTO=y
 
 #
@@ -1403,6 +1485,10 @@ CONFIG_CRYPTO_PCBC=m
 # CONFIG_CRYPTO_MD4 is not set
 # CONFIG_CRYPTO_MD5 is not set
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
 # CONFIG_CRYPTO_SHA1 is not set
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
@@ -1444,6 +1530,7 @@ CONFIG_BITREVERSE=y
 # CONFIG_GENERIC_FIND_NEXT_BIT is not set
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
+CONFIG_CRC_T10DIF=y
 CONFIG_CRC_ITU_T=m
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
diff --git a/arch/arm/configs/palmte_defconfig b/arch/arm/configs/palmte_defconfig
new file mode 100644
index 000000000000..40fc6a778e00
--- /dev/null
+++ b/arch/arm/configs/palmte_defconfig
@@ -0,0 +1,761 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.22-rc1-omap1
+# Sat May 19 11:04:27 2007
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_MMU=y
+# CONFIG_NO_IOPORT is not set
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_ZONE_DMA=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# Code maturity level options
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+
+#
+# General setup
+#
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+# CONFIG_SWAP is not set
+CONFIG_SYSVIPC=y
+# CONFIG_IPC_NS is not set
+CONFIG_SYSVIPC_SYSCTL=y
+CONFIG_BSD_PROCESS_ACCT=y
+# CONFIG_BSD_PROCESS_ACCT_V3 is not set
+# CONFIG_UTS_NS is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_SYSFS_DEPRECATED=y
+# CONFIG_RELAY is not set
+# CONFIG_BLK_DEV_INITRD is not set
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+# CONFIG_EMBEDDED is not set
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+
+#
+# Loadable module support
+#
+# CONFIG_MODULES is not set
+
+#
+# Block layer
+#
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+
+#
+# System Type
+#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS7500 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_CO285 is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_DAVINCI is not set
+CONFIG_ARCH_OMAP=y
+
+#
+# TI OMAP Implementations
+#
+CONFIG_ARCH_OMAP1=y
+# CONFIG_ARCH_OMAP2 is not set
+
+#
+# OMAP Feature Selections
+#
+# CONFIG_OMAP_RESET_CLOCKS is not set
+# CONFIG_OMAP_BOOT_TAG is not set
+CONFIG_OMAP_GPIO_SWITCH=y
+CONFIG_OMAP_MUX=y
+# CONFIG_OMAP_MUX_DEBUG is not set
+CONFIG_OMAP_MUX_WARNINGS=y
+CONFIG_OMAP_MCBSP=y
+# CONFIG_OMAP_MMU_FWK is not set
+# CONFIG_OMAP_MBOX_FWK is not set
+CONFIG_OMAP_MPU_TIMER=y
+# CONFIG_OMAP_32K_TIMER is not set
+CONFIG_OMAP_LL_DEBUG_UART1=y
+# CONFIG_OMAP_LL_DEBUG_UART2 is not set
+# CONFIG_OMAP_LL_DEBUG_UART3 is not set
+CONFIG_OMAP_SERIAL_WAKE=y
+# CONFIG_OMAP_DSP is not set
+
+#
+# OMAP Core Type
+#
+# CONFIG_ARCH_OMAP730 is not set
+CONFIG_ARCH_OMAP15XX=y
+# CONFIG_ARCH_OMAP16XX is not set
+
+#
+# OMAP Board Type
+#
+# CONFIG_MACH_OMAP_INNOVATOR is not set
+# CONFIG_MACH_VOICEBLUE is not set
+CONFIG_MACH_OMAP_PALMTE=y
+# CONFIG_MACH_OMAP_PALMZ71 is not set
+# CONFIG_MACH_OMAP_PALMTT is not set
+# CONFIG_MACH_SX1 is not set
+# CONFIG_MACH_AMS_DELTA is not set
+# CONFIG_MACH_OMAP_GENERIC is not set
+
+#
+# OMAP CPU Speed
+#
+CONFIG_OMAP_CLOCKS_SET_BY_BOOTLOADER=y
+# CONFIG_OMAP_ARM_168MHZ is not set
+# CONFIG_OMAP_ARM_150MHZ is not set
+# CONFIG_OMAP_ARM_120MHZ is not set
+# CONFIG_OMAP_ARM_60MHZ is not set
+# CONFIG_OMAP_ARM_30MHZ is not set
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_ARM925T=y
+CONFIG_CPU_32v4T=y
+CONFIG_CPU_ABRT_EV4T=y
+CONFIG_CPU_CACHE_V4WT=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_COPY_V4WB=y
+CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+# CONFIG_ARM_THUMB is not set
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
+# CONFIG_OUTER_CACHE is not set
+
+#
+# Bus support
+#
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+
+#
+# PCCARD (PCMCIA/CardBus) support
+#
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+# CONFIG_TICK_ONESHOT is not set
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+# CONFIG_PREEMPT is not set
+CONFIG_HZ=100
+# CONFIG_AEABI is not set
+# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+# CONFIG_LEDS is not set
+CONFIG_ALIGNMENT_TRAP=y
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE=""
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# CPU Frequency scaling
+#
+# CONFIG_CPU_FREQ is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_FPE_NWFPE=y
+# CONFIG_FPE_NWFPE_XP is not set
+# CONFIG_FPE_FASTFPE is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+# CONFIG_ARTHUR is not set
+
+#
+# Power management options
+#
+# CONFIG_PM is not set
+
+#
+# Networking
+#
+# CONFIG_NET is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+# CONFIG_STANDALONE is not set
+# CONFIG_PREVENT_FIRMWARE_BUILD is not set
+# CONFIG_FW_LOADER is not set
+# CONFIG_SYS_HYPERVISOR is not set
+
+#
+# Connector - unified userspace <-> kernelspace linker
+#
+# CONFIG_MTD is not set
+
+#
+# Parallel port support
+#
+# CONFIG_PARPORT is not set
+
+#
+# Plug and Play support
+#
+# CONFIG_PNPACPI is not set
+
+#
+# Block devices
+#
+# CONFIG_BLK_DEV_COW_COMMON is not set
+# CONFIG_BLK_DEV_LOOP is not set
+# CONFIG_BLK_DEV_RAM is not set
+# CONFIG_CDROM_PKTCDVD is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_ATA is not set
+
+#
+# Multi-device support (RAID and LVM)
+#
+# CONFIG_MD is not set
+
+#
+# ISDN subsystem
+#
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=320
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=320
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_TSDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_UNIX98_PTYS=y
+# CONFIG_LEGACY_PTYS is not set
+
+#
+# IPMI
+#
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_HW_RANDOM=y
+# CONFIG_NVRAM is not set
+CONFIG_OMAP_RTC=y
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+
+#
+# TPM devices
+#
+# CONFIG_TCG_TPM is not set
+# CONFIG_I2C is not set
+
+#
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+
+#
+# Dallas's 1-wire bus
+#
+# CONFIG_W1 is not set
+# CONFIG_HWMON is not set
+
+#
+# Misc devices
+#
+# CONFIG_BLINK is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_SM501 is not set
+
+#
+# LED devices
+#
+# CONFIG_NEW_LEDS is not set
+
+#
+# LED drivers
+#
+
+#
+# LED Triggers
+#
+
+#
+# Multimedia devices
+#
+# CONFIG_VIDEO_DEV is not set
+CONFIG_DAB=y
+
+#
+# Graphics support
+#
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+# CONFIG_VGASTATE is not set
+CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
+# CONFIG_FB_CFB_FILLRECT is not set
+# CONFIG_FB_CFB_COPYAREA is not set
+# CONFIG_FB_CFB_IMAGEBLIT is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_SYS_FOPS is not set
+CONFIG_FB_DEFERRED_IO=y
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_S1D13XXX is not set
+CONFIG_FB_OMAP=y
+# CONFIG_FB_OMAP_LCDC_EXTERNAL is not set
+# CONFIG_FB_OMAP_LCD_MIPID is not set
+# CONFIG_FB_OMAP_BOOTLOADER_INIT is not set
+CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE=2
+# CONFIG_FB_OMAP_DMA_TUNE is not set
+# CONFIG_FB_VIRTUAL is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
+# CONFIG_FONTS is not set
+CONFIG_FONT_8x8=y
+CONFIG_FONT_8x16=y
+CONFIG_LOGO=y
+# CONFIG_LOGO_LINUX_MONO is not set
+# CONFIG_LOGO_LINUX_VGA16 is not set
+CONFIG_LOGO_LINUX_CLUT224=y
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+
+#
+# HID Devices
+#
+CONFIG_HID=y
+# CONFIG_HID_DEBUG is not set
+
+#
+# USB support
+#
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+# CONFIG_USB is not set
+# CONFIG_USB_MUSB_HDRC is not set
+# CONFIG_USB_GADGET_MUSB_HDRC is not set
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# USB Gadget Support
+#
+CONFIG_USB_GADGET=y
+# CONFIG_USB_GADGET_DEBUG_FILES is not set
+CONFIG_USB_GADGET_SELECTED=y
+# CONFIG_USB_GADGET_FSL_USB2 is not set
+# CONFIG_USB_GADGET_NET2280 is not set
+# CONFIG_USB_GADGET_PXA2XX is not set
+# CONFIG_USB_GADGET_GOKU is not set
+# CONFIG_USB_GADGET_LH7A40X is not set
+CONFIG_USB_GADGET_OMAP=y
+CONFIG_USB_OMAP=y
+# CONFIG_USB_GADGET_AT91 is not set
+# CONFIG_USB_GADGET_DUMMY_HCD is not set
+# CONFIG_USB_GADGET_DUALSPEED is not set
+CONFIG_USB_ZERO=y
+# CONFIG_USB_ETH is not set
+# CONFIG_USB_GADGETFS is not set
+# CONFIG_USB_FILE_STORAGE is not set
+# CONFIG_USB_G_SERIAL is not set
+# CONFIG_USB_MIDI_GADGET is not set
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+# CONFIG_MMC_UNSAFE_RESUME is not set
+
+#
+# MMC/SD Card Drivers
+#
+CONFIG_MMC_BLOCK=y
+
+#
+# MMC/SD Host Controller Drivers
+#
+CONFIG_MMC_OMAP=y
+
+#
+# Real Time Clock
+#
+CONFIG_RTC_LIB=y
+# CONFIG_RTC_CLASS is not set
+
+#
+# CBUS support
+#
+# CONFIG_CBUS is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4DEV_FS is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_INOTIFY is not set
+# CONFIG_QUOTA is not set
+CONFIG_DNOTIFY=y
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=850
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_RAMFS=y
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_CRAMFS=y
+# CONFIG_VXFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_BSD_DISKLABEL is not set
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_UNIXWARE_DISKLABEL is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+# CONFIG_SYSV68_PARTITION is not set
+
+#
+# Native Language Support
+#
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+# CONFIG_NLS_CODEPAGE_437 is not set
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+CONFIG_NLS_CODEPAGE_850=y
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+CONFIG_NLS_ISO8859_1=y
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+
+#
+# Profiling support
+#
+# CONFIG_PROFILING is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_MUST_CHECK=y
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_KERNEL is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_FRAME_POINTER=y
+# CONFIG_DEBUG_USER is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+
+#
+# Cryptographic options
+#
+# CONFIG_CRYPTO is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_CRC_CCITT=y
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/palmtt_defconfig b/arch/arm/configs/palmtt_defconfig
new file mode 100644
index 000000000000..e54ced41217e
--- /dev/null
+++ b/arch/arm/configs/palmtt_defconfig
@@ -0,0 +1,844 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.19-rc3-omap1
+# Sun Oct 29 00:36:12 2006
+#
+CONFIG_ARM=y
+# CONFIG_GENERIC_TIME is not set
+CONFIG_MMU=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# Code maturity level options
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+
+#
+# General setup
+#
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+# CONFIG_IPC_NS is not set
+# CONFIG_POSIX_MQUEUE is not set
+CONFIG_BSD_PROCESS_ACCT=y
+# CONFIG_BSD_PROCESS_ACCT_V3 is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_UTS_NS is not set
+# CONFIG_AUDIT is not set
+# CONFIG_IKCONFIG is not set
+# CONFIG_RELAY is not set
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+# CONFIG_EMBEDDED is not set
+CONFIG_UID16=y
+# CONFIG_SYSCTL_SYSCALL is not set
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SHMEM=y
+CONFIG_SLAB=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+# CONFIG_SLOB is not set
+
+#
+# Loadable module support
+#
+# CONFIG_MODULES is not set
+
+#
+# Block layer
+#
+CONFIG_BLOCK=y
+# CONFIG_BLK_DEV_IO_TRACE is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+# CONFIG_IOSCHED_AS is not set
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_NOOP=y
+CONFIG_DEFAULT_IOSCHED="noop"
+
+#
+# System Type
+#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS7500 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_CO285 is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+CONFIG_ARCH_OMAP=y
+
+#
+# TI OMAP Implementations
+#
+CONFIG_ARCH_OMAP1=y
+# CONFIG_ARCH_OMAP2 is not set
+
+#
+# OMAP Feature Selections
+#
+# CONFIG_OMAP_RESET_CLOCKS is not set
+# CONFIG_OMAP_BOOT_TAG is not set
+# CONFIG_OMAP_GPIO_SWITCH is not set
+CONFIG_OMAP_MUX=y
+# CONFIG_OMAP_MUX_DEBUG is not set
+CONFIG_OMAP_MUX_WARNINGS=y
+CONFIG_OMAP_MCBSP=y
+CONFIG_OMAP_MPU_TIMER=y
+# CONFIG_OMAP_32K_TIMER is not set
+# CONFIG_OMAP_LL_DEBUG_UART1 is not set
+CONFIG_OMAP_LL_DEBUG_UART2=y
+# CONFIG_OMAP_LL_DEBUG_UART3 is not set
+CONFIG_OMAP_SERIAL_WAKE=y
+CONFIG_OMAP_DSP=y
+# CONFIG_OMAP_DSP_MBCMD_VERBOSE is not set
+# CONFIG_OMAP_DSP_TASK_MULTIOPEN is not set
+CONFIG_OMAP_DSP_FBEXPORT=y
+
+#
+# OMAP Core Type
+#
+# CONFIG_ARCH_OMAP730 is not set
+CONFIG_ARCH_OMAP15XX=y
+# CONFIG_ARCH_OMAP16XX is not set
+
+#
+# OMAP Board Type
+#
+# CONFIG_MACH_OMAP_INNOVATOR is not set
+# CONFIG_MACH_VOICEBLUE is not set
+# CONFIG_MACH_OMAP_PALMTE is not set
+# CONFIG_MACH_OMAP_PALMZ71 is not set
+CONFIG_MACH_OMAP_PALMTT=y
+# CONFIG_MACH_AMS_DELTA is not set
+# CONFIG_MACH_OMAP_GENERIC is not set
+
+#
+# OMAP CPU Speed
+#
+CONFIG_OMAP_CLOCKS_SET_BY_BOOTLOADER=y
+# CONFIG_OMAP_ARM_168MHZ is not set
+# CONFIG_OMAP_ARM_150MHZ is not set
+# CONFIG_OMAP_ARM_120MHZ is not set
+# CONFIG_OMAP_ARM_60MHZ is not set
+# CONFIG_OMAP_ARM_30MHZ is not set
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_ARM925T=y
+CONFIG_CPU_32v4T=y
+CONFIG_CPU_ABRT_EV4T=y
+CONFIG_CPU_CACHE_V4WT=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_COPY_V4WB=y
+CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
+
+#
+# Bus support
+#
+
+#
+# PCCARD (PCMCIA/CardBus) support
+#
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+# CONFIG_PREEMPT is not set
+# CONFIG_NO_IDLE_HZ is not set
+CONFIG_HZ=100
+# CONFIG_AEABI is not set
+# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_RESOURCES_64BIT is not set
+# CONFIG_LEDS is not set
+CONFIG_ALIGNMENT_TRAP=y
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="root=/dev/mmcblk0p2 rw init=/init"
+# CONFIG_XIP_KERNEL is not set
+
+#
+# CPU Frequency scaling
+#
+# CONFIG_CPU_FREQ is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_FPE_NWFPE=y
+# CONFIG_FPE_NWFPE_XP is not set
+# CONFIG_FPE_FASTFPE is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+# CONFIG_ARTHUR is not set
+
+#
+# Power management options
+#
+# CONFIG_PM is not set
+# CONFIG_APM is not set
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+# CONFIG_NETDEBUG is not set
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+CONFIG_NET_KEY=y
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+# CONFIG_IP_PNP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_DIAG is not set
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_IPV6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+
+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+
+#
+# TIPC Configuration (EXPERIMENTAL)
+#
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_IEEE80211 is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_FW_LOADER is not set
+# CONFIG_SYS_HYPERVISOR is not set
+
+#
+# Connector - unified userspace <-> kernelspace linker
+#
+# CONFIG_CONNECTOR is not set
+
+#
+# Memory Technology Devices (MTD)
+#
+# CONFIG_MTD is not set
+
+#
+# Parallel port support
+#
+# CONFIG_PARPORT is not set
+
+#
+# Plug and Play support
+#
+
+#
+# Block devices
+#
+# CONFIG_BLK_DEV_COW_COMMON is not set
+# CONFIG_BLK_DEV_LOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_RAM is not set
+# CONFIG_BLK_DEV_INITRD is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_NETLINK is not set
+
+#
+# Multi-device support (RAID and LVM)
+#
+# CONFIG_MD is not set
+
+#
+# Fusion MPT device support
+#
+# CONFIG_FUSION is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+
+#
+# I2O device support
+#
+
+#
+# Network device support
+#
+# CONFIG_NETDEVICES is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+
+#
+# ISDN subsystem
+#
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+CONFIG_INPUT_MOUSEDEV_PSAUX=y
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=320
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=320
+# CONFIG_INPUT_JOYDEV is not set
+CONFIG_INPUT_TSDEV=y
+CONFIG_INPUT_TSDEV_SCREEN_X=320
+CONFIG_INPUT_TSDEV_SCREEN_Y=320
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+CONFIG_INPUT_TOUCHSCREEN=y
+CONFIG_TOUCHSCREEN_ADS7846=y
+# CONFIG_TOUCHSCREEN_GUNZE is not set
+# CONFIG_TOUCHSCREEN_ELO is not set
+# CONFIG_TOUCHSCREEN_MTOUCH is not set
+# CONFIG_TOUCHSCREEN_MK712 is not set
+# CONFIG_TOUCHSCREEN_PENMOUNT is not set
+# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
+# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
+# CONFIG_TOUCHSCREEN_TSC2102 is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_UNIX98_PTYS=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+
+#
+# IPMI
+#
+# CONFIG_IPMI_HANDLER is not set
+
+#
+# Watchdog Cards
+#
+# CONFIG_WATCHDOG is not set
+CONFIG_HW_RANDOM=y
+# CONFIG_NVRAM is not set
+# CONFIG_OMAP_RTC is not set
+# CONFIG_DTLK is not set
+# CONFIG_R3964 is not set
+
+#
+# Ftape, the floppy tape device driver
+#
+# CONFIG_RAW_DRIVER is not set
+
+#
+# TPM devices
+#
+# CONFIG_TCG_TPM is not set
+
+#
+# I2C support
+#
+# CONFIG_I2C is not set
+
+#
+# SPI support
+#
+CONFIG_SPI=y
+CONFIG_SPI_MASTER=y
+
+#
+# SPI Master Controller Drivers
+#
+CONFIG_SPI_BITBANG=y
+CONFIG_SPI_OMAP_UWIRE=y
+
+#
+# SPI Protocol Masters
+#
+# CONFIG_TSC2102 is not set
+
+#
+# Dallas's 1-wire bus
+#
+# CONFIG_W1 is not set
+
+#
+# Hardware Monitoring support
+#
+CONFIG_HWMON=y
+# CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_ABITUGURU is not set
+# CONFIG_SENSORS_F71805F is not set
+# CONFIG_SENSORS_LM70 is not set
+# CONFIG_SENSORS_VT1211 is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+
+#
+# Misc devices
+#
+# CONFIG_SGI_IOC4 is not set
+# CONFIG_TIFM_CORE is not set
+
+#
+# LED devices
+#
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+
+#
+# LED drivers
+#
+CONFIG_LEDS_OMAP=y
+
+#
+# LED Triggers
+#
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_TIMER=y
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+
+#
+# Multimedia devices
+#
+# CONFIG_VIDEO_DEV is not set
+
+#
+# Digital Video Broadcasting Devices
+#
+# CONFIG_DVB is not set
+
+#
+# Graphics support
+#
+CONFIG_FIRMWARE_EDID=y
+CONFIG_FB=y
+# CONFIG_FB_CFB_FILLRECT is not set
+# CONFIG_FB_CFB_COPYAREA is not set
+# CONFIG_FB_CFB_IMAGEBLIT is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+# CONFIG_FB_S1D13XXX is not set
+# CONFIG_FB_VIRTUAL is not set
+CONFIG_FB_OMAP=y
+# CONFIG_FB_OMAP_LCDC_EXTERNAL is not set
+# CONFIG_FB_OMAP_LCD_MIPID is not set
+# CONFIG_FB_OMAP_BOOTLOADER_INIT is not set
+CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE=2
+# CONFIG_FB_OMAP_DMA_TUNE is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
+# CONFIG_FONTS is not set
+CONFIG_FONT_8x8=y
+CONFIG_FONT_8x16=y
+
+#
+# Logo configuration
+#
+# CONFIG_LOGO is not set
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+CONFIG_BACKLIGHT_CLASS_DEVICE=y
+CONFIG_BACKLIGHT_DEVICE=y
+CONFIG_LCD_CLASS_DEVICE=y
+CONFIG_LCD_DEVICE=y
+CONFIG_BACKLIGHT_OMAP=y
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+
+#
+# USB support
+#
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+# CONFIG_USB is not set
+
+#
+# Enable Host or Gadget support to see Inventra options
+#
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# USB Gadget Support
+#
+# CONFIG_USB_GADGET is not set
+
+#
+# MMC/SD Card support
+#
+# CONFIG_MMC is not set
+
+#
+# Real Time Clock
+#
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+
+#
+# RTC drivers
+#
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+CONFIG_RTC_DRV_OMAP=y
+# CONFIG_RTC_DRV_RS5C348 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_TEST is not set
+# CONFIG_RTC_DRV_MAX6902 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# Synchronous Serial Interfaces (SSI)
+#
+# CONFIG_OMAP_UWIRE is not set
+# CONFIG_OMAP_TSC2101 is not set
+
+#
+# CBUS support
+#
+# CONFIG_CBUS is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4DEV_FS is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_INOTIFY is not set
+# CONFIG_QUOTA is not set
+CONFIG_DNOTIFY=y
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+# CONFIG_TMPFS is not set
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_RAMFS=y
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+
+#
+# Network File Systems
+#
+# CONFIG_NFS_FS is not set
+# CONFIG_NFSD is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_BSD_DISKLABEL is not set
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_UNIXWARE_DISKLABEL is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+
+#
+# Native Language Support
+#
+# CONFIG_NLS is not set
+
+#
+# Profiling support
+#
+# CONFIG_PROFILING is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+# CONFIG_ENABLE_MUST_CHECK is not set
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_KERNEL is not set
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_DEBUG_BUGVERBOSE=y
+# CONFIG_DEBUG_FS is not set
+CONFIG_FRAME_POINTER=y
+# CONFIG_UNWIND_INFO is not set
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_USER is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+
+#
+# Cryptographic options
+#
+# CONFIG_CRYPTO is not set
+
+#
+# Library routines
+#
+CONFIG_CRC_CCITT=y
+CONFIG_CRC16=y
+CONFIG_CRC32=y
+CONFIG_LIBCRC32C=y
+CONFIG_PLIST=y
diff --git a/arch/arm/configs/palmz71_defconfig b/arch/arm/configs/palmz71_defconfig
new file mode 100644
index 000000000000..6361922e71c1
--- /dev/null
+++ b/arch/arm/configs/palmz71_defconfig
@@ -0,0 +1,891 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.22-rc1-omap1
+# Thu Jun  7 05:13:00 2007
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_MMU=y
+# CONFIG_NO_IOPORT is not set
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_ZONE_DMA=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# Code maturity level options
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+
+#
+# General setup
+#
+CONFIG_LOCALVERSION="-z71"
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+# CONFIG_IPC_NS is not set
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+CONFIG_BSD_PROCESS_ACCT=y
+# CONFIG_BSD_PROCESS_ACCT_V3 is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_UTS_NS is not set
+# CONFIG_AUDIT is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_SYSFS_DEPRECATED=y
+# CONFIG_RELAY is not set
+# CONFIG_BLK_DEV_INITRD is not set
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+# CONFIG_EMBEDDED is not set
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+
+#
+# Loadable module support
+#
+# CONFIG_MODULES is not set
+
+#
+# Block layer
+#
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+# CONFIG_IOSCHED_AS is not set
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_NOOP=y
+CONFIG_DEFAULT_IOSCHED="noop"
+
+#
+# System Type
+#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS7500 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_CO285 is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_DAVINCI is not set
+CONFIG_ARCH_OMAP=y
+
+#
+# TI OMAP Implementations
+#
+CONFIG_ARCH_OMAP1=y
+# CONFIG_ARCH_OMAP2 is not set
+
+#
+# OMAP Feature Selections
+#
+# CONFIG_OMAP_RESET_CLOCKS is not set
+# CONFIG_OMAP_BOOT_TAG is not set
+# CONFIG_OMAP_GPIO_SWITCH is not set
+CONFIG_OMAP_MUX=y
+# CONFIG_OMAP_MUX_DEBUG is not set
+CONFIG_OMAP_MUX_WARNINGS=y
+CONFIG_OMAP_MCBSP=y
+# CONFIG_OMAP_MMU_FWK is not set
+# CONFIG_OMAP_MBOX_FWK is not set
+CONFIG_OMAP_MPU_TIMER=y
+# CONFIG_OMAP_32K_TIMER is not set
+CONFIG_OMAP_LL_DEBUG_UART1=y
+# CONFIG_OMAP_LL_DEBUG_UART2 is not set
+# CONFIG_OMAP_LL_DEBUG_UART3 is not set
+# CONFIG_OMAP_LL_DEBUG_LCD is not set
+CONFIG_OMAP_SERIAL_WAKE=y
+# CONFIG_OMAP_DSP is not set
+
+#
+# OMAP Core Type
+#
+# CONFIG_ARCH_OMAP730 is not set
+CONFIG_ARCH_OMAP15XX=y
+# CONFIG_ARCH_OMAP16XX is not set
+
+#
+# OMAP Board Type
+#
+# CONFIG_MACH_OMAP_INNOVATOR is not set
+# CONFIG_MACH_VOICEBLUE is not set
+# CONFIG_MACH_OMAP_PALMTE is not set
+CONFIG_MACH_OMAP_PALMZ71=y
+# CONFIG_MACH_OMAP_PALMTT is not set
+# CONFIG_MACH_SX1 is not set
+# CONFIG_MACH_AMS_DELTA is not set
+# CONFIG_MACH_OMAP_GENERIC is not set
+
+#
+# OMAP CPU Speed
+#
+CONFIG_OMAP_CLOCKS_SET_BY_BOOTLOADER=y
+# CONFIG_OMAP_ARM_168MHZ is not set
+# CONFIG_OMAP_ARM_150MHZ is not set
+# CONFIG_OMAP_ARM_120MHZ is not set
+# CONFIG_OMAP_ARM_60MHZ is not set
+# CONFIG_OMAP_ARM_30MHZ is not set
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_ARM925T=y
+CONFIG_CPU_32v4T=y
+CONFIG_CPU_ABRT_EV4T=y
+CONFIG_CPU_CACHE_V4WT=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_COPY_V4WB=y
+CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+# CONFIG_ARM_THUMB is not set
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
+# CONFIG_OUTER_CACHE is not set
+
+#
+# Bus support
+#
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+
+#
+# PCCARD (PCMCIA/CardBus) support
+#
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+# CONFIG_TICK_ONESHOT is not set
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+# CONFIG_PREEMPT is not set
+CONFIG_HZ=100
+# CONFIG_AEABI is not set
+# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+# CONFIG_LEDS is not set
+CONFIG_ALIGNMENT_TRAP=y
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE=""
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# CPU Frequency scaling
+#
+# CONFIG_CPU_FREQ is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_FPE_NWFPE=y
+# CONFIG_FPE_NWFPE_XP is not set
+# CONFIG_FPE_FASTFPE is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+# CONFIG_ARTHUR is not set
+
+#
+# Power management options
+#
+# CONFIG_PM is not set
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+CONFIG_NET_KEY=y
+# CONFIG_NET_KEY_MIGRATE is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+# CONFIG_IP_PNP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_DIAG is not set
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+
+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+
+#
+# TIPC Configuration (EXPERIMENTAL)
+#
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
+# CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_FW_LOADER is not set
+# CONFIG_SYS_HYPERVISOR is not set
+
+#
+# Connector - unified userspace <-> kernelspace linker
+#
+# CONFIG_CONNECTOR is not set
+# CONFIG_MTD is not set
+
+#
+# Parallel port support
+#
+# CONFIG_PARPORT is not set
+
+#
+# Plug and Play support
+#
+# CONFIG_PNPACPI is not set
+
+#
+# Block devices
+#
+# CONFIG_BLK_DEV_COW_COMMON is not set
+# CONFIG_BLK_DEV_LOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_RAM is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_ATA is not set
+
+#
+# Multi-device support (RAID and LVM)
+#
+# CONFIG_MD is not set
+
+#
+# Network device support
+#
+# CONFIG_NETDEVICES is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+
+#
+# ISDN subsystem
+#
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+CONFIG_INPUT_MOUSEDEV_PSAUX=y
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=320
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=320
+# CONFIG_INPUT_JOYDEV is not set
+CONFIG_INPUT_TSDEV=y
+CONFIG_INPUT_TSDEV_SCREEN_X=320
+CONFIG_INPUT_TSDEV_SCREEN_Y=320
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+CONFIG_INPUT_TOUCHSCREEN=y
+CONFIG_TOUCHSCREEN_ADS7846=y
+# CONFIG_TOUCHSCREEN_GUNZE is not set
+# CONFIG_TOUCHSCREEN_ELO is not set
+# CONFIG_TOUCHSCREEN_MTOUCH is not set
+# CONFIG_TOUCHSCREEN_MK712 is not set
+# CONFIG_TOUCHSCREEN_PENMOUNT is not set
+# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
+# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
+# CONFIG_TOUCHSCREEN_UCB1400 is not set
+# CONFIG_TOUCHSCREEN_TSC210X is not set
+# CONFIG_TOUCHSCREEN_TSC2046 is not set
+# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_NR_UARTS=4
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
+# CONFIG_SERIAL_8250_EXTENDED is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=16
+
+#
+# IPMI
+#
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_HW_RANDOM=y
+# CONFIG_NVRAM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+
+#
+# TPM devices
+#
+# CONFIG_TCG_TPM is not set
+# CONFIG_I2C is not set
+
+#
+# SPI support
+#
+CONFIG_SPI=y
+CONFIG_SPI_MASTER=y
+
+#
+# SPI Master Controller Drivers
+#
+CONFIG_SPI_BITBANG=y
+CONFIG_SPI_OMAP_UWIRE=y
+
+#
+# SPI Protocol Masters
+#
+# CONFIG_SPI_AT25 is not set
+# CONFIG_SPI_TSC2101 is not set
+# CONFIG_SPI_TSC2102 is not set
+# CONFIG_SPI_TSC210X is not set
+# CONFIG_SPI_TSC2301 is not set
+# CONFIG_SPI_SPIDEV is not set
+
+#
+# Dallas's 1-wire bus
+#
+# CONFIG_W1 is not set
+CONFIG_HWMON=y
+# CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_ABITUGURU is not set
+# CONFIG_SENSORS_F71805F is not set
+# CONFIG_SENSORS_LM70 is not set
+# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_SMSC47M1 is not set
+# CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_VT1211 is not set
+# CONFIG_SENSORS_W83627HF is not set
+# CONFIG_SENSORS_TSC210X is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+
+#
+# Misc devices
+#
+# CONFIG_BLINK is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_SM501 is not set
+
+#
+# LED devices
+#
+# CONFIG_NEW_LEDS is not set
+
+#
+# LED drivers
+#
+
+#
+# LED Triggers
+#
+
+#
+# Multimedia devices
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+CONFIG_DAB=y
+
+#
+# Graphics support
+#
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+CONFIG_BACKLIGHT_CLASS_DEVICE=y
+CONFIG_LCD_CLASS_DEVICE=y
+CONFIG_BACKLIGHT_OMAP=y
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+# CONFIG_VGASTATE is not set
+CONFIG_FB=y
+CONFIG_FIRMWARE_EDID=y
+# CONFIG_FB_DDC is not set
+# CONFIG_FB_CFB_FILLRECT is not set
+# CONFIG_FB_CFB_COPYAREA is not set
+# CONFIG_FB_CFB_IMAGEBLIT is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_SYS_FOPS is not set
+CONFIG_FB_DEFERRED_IO=y
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_S1D13XXX is not set
+CONFIG_FB_OMAP=y
+# CONFIG_FB_OMAP_LCDC_EXTERNAL is not set
+# CONFIG_FB_OMAP_LCD_MIPID is not set
+# CONFIG_FB_OMAP_BOOTLOADER_INIT is not set
+CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE=2
+# CONFIG_FB_OMAP_DMA_TUNE is not set
+# CONFIG_FB_VIRTUAL is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
+# CONFIG_FONTS is not set
+CONFIG_FONT_8x8=y
+CONFIG_FONT_8x16=y
+# CONFIG_LOGO is not set
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+
+#
+# HID Devices
+#
+CONFIG_HID=y
+# CONFIG_HID_DEBUG is not set
+
+#
+# USB support
+#
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+# CONFIG_USB is not set
+
+#
+# Enable Host or Gadget support to see Inventra options
+#
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# USB Gadget Support
+#
+# CONFIG_USB_GADGET is not set
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+# CONFIG_MMC_UNSAFE_RESUME is not set
+
+#
+# MMC/SD Card Drivers
+#
+CONFIG_MMC_BLOCK=y
+
+#
+# MMC/SD Host Controller Drivers
+#
+CONFIG_MMC_OMAP=y
+
+#
+# Real Time Clock
+#
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+
+#
+# SPI RTC drivers
+#
+# CONFIG_RTC_DRV_RS5C348 is not set
+# CONFIG_RTC_DRV_MAX6902 is not set
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+CONFIG_RTC_DRV_OMAP=y
+
+#
+# CBUS support
+#
+# CONFIG_CBUS is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4DEV_FS is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_INOTIFY is not set
+# CONFIG_QUOTA is not set
+CONFIG_DNOTIFY=y
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+# CONFIG_TMPFS is not set
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_RAMFS=y
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+
+#
+# Network File Systems
+#
+# CONFIG_NFS_FS is not set
+# CONFIG_NFSD is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+
+#
+# Native Language Support
+#
+# CONFIG_NLS is not set
+
+#
+# Distributed Lock Manager
+#
+# CONFIG_DLM is not set
+
+#
+# Profiling support
+#
+# CONFIG_PROFILING is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_MUST_CHECK=y
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_KERNEL is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_FRAME_POINTER=y
+# CONFIG_DEBUG_USER is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+
+#
+# Cryptographic options
+#
+# CONFIG_CRYPTO is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_CRC_CCITT=y
+CONFIG_CRC16=y
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+CONFIG_LIBCRC32C=y
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/qil-a9260_defconfig b/arch/arm/configs/qil-a9260_defconfig
index ef903bed061e..5cbd81589647 100644
--- a/arch/arm/configs/qil-a9260_defconfig
+++ b/arch/arm/configs/qil-a9260_defconfig
@@ -458,10 +458,10 @@ CONFIG_MTD_NAND=y
 # CONFIG_MTD_NAND_MUSEUM_IDS is not set
 CONFIG_MTD_NAND_IDS=y
 # CONFIG_MTD_NAND_DISKONCHIP is not set
-CONFIG_MTD_NAND_AT91=y
-CONFIG_MTD_NAND_AT91_ECC_SOFT=y
-# CONFIG_MTD_NAND_AT91_ECC_HW is not set
-# CONFIG_MTD_NAND_AT91_ECC_NONE is not set
+CONFIG_MTD_NAND_ATMEL=y
+CONFIG_MTD_NAND_ATMEL_ECC_SOFT=y
+# CONFIG_MTD_NAND_ATMEL_ECC_HW is not set
+# CONFIG_MTD_NAND_ATMEL_ECC_NONE is not set
 # CONFIG_MTD_NAND_NANDSIM is not set
 # CONFIG_MTD_NAND_PLATFORM is not set
 # CONFIG_MTD_ALAUDA is not set
diff --git a/arch/arm/configs/sam9_l9260_defconfig b/arch/arm/configs/sam9_l9260_defconfig
index 8688362bcf7b..1174e2764875 100644
--- a/arch/arm/configs/sam9_l9260_defconfig
+++ b/arch/arm/configs/sam9_l9260_defconfig
@@ -429,7 +429,7 @@ CONFIG_MTD_NAND=y
 # CONFIG_MTD_NAND_MUSEUM_IDS is not set
 CONFIG_MTD_NAND_IDS=y
 # CONFIG_MTD_NAND_DISKONCHIP is not set
-CONFIG_MTD_NAND_AT91=y
+CONFIG_MTD_NAND_ATMEL=y
 # CONFIG_MTD_NAND_NANDSIM is not set
 CONFIG_MTD_NAND_PLATFORM=y
 # CONFIG_MTD_ONENAND is not set
diff --git a/arch/arm/configs/sx1_defconfig b/arch/arm/configs/sx1_defconfig
new file mode 100644
index 000000000000..853dcdd9f2e0
--- /dev/null
+++ b/arch/arm/configs/sx1_defconfig
@@ -0,0 +1,1118 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.22-rc1-omap1
+# Thu Jun  7 05:16:10 2007
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_MMU=y
+# CONFIG_NO_IOPORT is not set
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_ZONE_DMA=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# Code maturity level options
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+
+#
+# General setup
+#
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+# CONFIG_IPC_NS is not set
+CONFIG_SYSVIPC_SYSCTL=y
+CONFIG_POSIX_MQUEUE=y
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_UTS_NS is not set
+# CONFIG_AUDIT is not set
+CONFIG_IKCONFIG=y
+# CONFIG_IKCONFIG_PROC is not set
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_SYSFS_DEPRECATED=y
+# CONFIG_RELAY is not set
+# CONFIG_BLK_DEV_INITRD is not set
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_EMBEDDED=y
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+# CONFIG_KALLSYMS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+# CONFIG_ELF_CORE is not set
+# CONFIG_BASE_FULL is not set
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+# CONFIG_SHMEM is not set
+# CONFIG_VM_EVENT_COUNTERS is not set
+# CONFIG_SLAB is not set
+# CONFIG_SLUB is not set
+CONFIG_SLOB=y
+CONFIG_RT_MUTEXES=y
+CONFIG_TINY_SHMEM=y
+CONFIG_BASE_SMALL=1
+
+#
+# Loadable module support
+#
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
+
+#
+# Block layer
+#
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+# CONFIG_IOSCHED_AS is not set
+CONFIG_IOSCHED_DEADLINE=y
+# CONFIG_IOSCHED_CFQ is not set
+# CONFIG_DEFAULT_AS is not set
+CONFIG_DEFAULT_DEADLINE=y
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="deadline"
+
+#
+# System Type
+#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS7500 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_CO285 is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_DAVINCI is not set
+CONFIG_ARCH_OMAP=y
+
+#
+# TI OMAP Implementations
+#
+CONFIG_ARCH_OMAP1=y
+# CONFIG_ARCH_OMAP2 is not set
+
+#
+# OMAP Feature Selections
+#
+# CONFIG_OMAP_RESET_CLOCKS is not set
+CONFIG_OMAP_BOOT_TAG=y
+# CONFIG_OMAP_BOOT_REASON is not set
+# CONFIG_OMAP_COMPONENT_VERSION is not set
+CONFIG_OMAP_GPIO_SWITCH=y
+CONFIG_OMAP_MUX=y
+# CONFIG_OMAP_MUX_DEBUG is not set
+CONFIG_OMAP_MUX_WARNINGS=y
+CONFIG_OMAP_MCBSP=y
+CONFIG_OMAP_MMU_FWK=y
+CONFIG_OMAP_MBOX_FWK=y
+CONFIG_OMAP_MPU_TIMER=y
+# CONFIG_OMAP_32K_TIMER is not set
+# CONFIG_OMAP_LL_DEBUG_UART1 is not set
+# CONFIG_OMAP_LL_DEBUG_UART2 is not set
+CONFIG_OMAP_LL_DEBUG_UART3=y
+# CONFIG_OMAP_LL_DEBUG_LCD is not set
+CONFIG_OMAP_SERIAL_WAKE=y
+CONFIG_OMAP_DSP=y
+# CONFIG_OMAP_DSP_MBCMD_VERBOSE is not set
+# CONFIG_OMAP_DSP_TASK_MULTIOPEN is not set
+# CONFIG_OMAP_DSP_FBEXPORT is not set
+
+#
+# OMAP Core Type
+#
+# CONFIG_ARCH_OMAP730 is not set
+CONFIG_ARCH_OMAP15XX=y
+# CONFIG_ARCH_OMAP16XX is not set
+
+#
+# OMAP Board Type
+#
+# CONFIG_MACH_OMAP_INNOVATOR is not set
+# CONFIG_MACH_VOICEBLUE is not set
+# CONFIG_MACH_OMAP_PALMTE is not set
+# CONFIG_MACH_OMAP_PALMZ71 is not set
+# CONFIG_MACH_OMAP_PALMTT is not set
+CONFIG_MACH_SX1=y
+# CONFIG_MACH_AMS_DELTA is not set
+# CONFIG_MACH_OMAP_GENERIC is not set
+
+#
+# OMAP CPU Speed
+#
+# CONFIG_OMAP_CLOCKS_SET_BY_BOOTLOADER is not set
+CONFIG_OMAP_ARM_168MHZ=y
+# CONFIG_OMAP_ARM_150MHZ is not set
+# CONFIG_OMAP_ARM_120MHZ is not set
+# CONFIG_OMAP_ARM_60MHZ is not set
+# CONFIG_OMAP_ARM_30MHZ is not set
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_ARM925T=y
+CONFIG_CPU_32v4T=y
+CONFIG_CPU_ABRT_EV4T=y
+CONFIG_CPU_CACHE_V4WT=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_COPY_V4WB=y
+CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
+# CONFIG_OUTER_CACHE is not set
+
+#
+# Bus support
+#
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+
+#
+# PCCARD (PCMCIA/CardBus) support
+#
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+# CONFIG_TICK_ONESHOT is not set
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_PREEMPT=y
+CONFIG_HZ=100
+# CONFIG_AEABI is not set
+# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+# CONFIG_LEDS is not set
+CONFIG_ALIGNMENT_TRAP=y
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE=""
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# CPU Frequency scaling
+#
+# CONFIG_CPU_FREQ is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_FPE_NWFPE=y
+# CONFIG_FPE_NWFPE_XP is not set
+# CONFIG_FPE_FASTFPE is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_AOUT is not set
+CONFIG_BINFMT_MISC=y
+# CONFIG_ARTHUR is not set
+
+#
+# Power management options
+#
+# CONFIG_PM is not set
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+CONFIG_PACKET_MMAP=y
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+# CONFIG_IP_PNP_DHCP is not set
+# CONFIG_IP_PNP_BOOTP is not set
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_DIAG is not set
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+
+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+
+#
+# TIPC Configuration (EXPERIMENTAL)
+#
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
+# CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_FW_LOADER is not set
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+
+#
+# Connector - unified userspace <-> kernelspace linker
+#
+CONFIG_CONNECTOR=y
+# CONFIG_PROC_EVENTS is not set
+# CONFIG_MTD is not set
+
+#
+# Parallel port support
+#
+# CONFIG_PARPORT is not set
+
+#
+# Plug and Play support
+#
+# CONFIG_PNPACPI is not set
+
+#
+# Block devices
+#
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=m
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+CONFIG_BLK_DEV_RAM=m
+CONFIG_BLK_DEV_RAM_COUNT=2
+CONFIG_BLK_DEV_RAM_SIZE=4096
+CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_ATA is not set
+
+#
+# Multi-device support (RAID and LVM)
+#
+# CONFIG_MD is not set
+
+#
+# Network device support
+#
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+# CONFIG_MARVELL_PHY is not set
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+# CONFIG_SMSC_PHY is not set
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_FIXED_PHY is not set
+
+#
+# Ethernet (10 or 100Mbit)
+#
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_SMC91X is not set
+# CONFIG_DM9000 is not set
+CONFIG_NETDEV_1000=y
+CONFIG_NETDEV_10000=y
+
+#
+# Token Ring devices
+#
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+# CONFIG_WAN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_SHAPER is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+
+#
+# ISDN subsystem
+#
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+
+#
+# Userland interfaces
+#
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_TSDEV is not set
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ATKBD is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+CONFIG_KEYBOARD_OMAP=y
+# CONFIG_KEYBOARD_GPIO is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+# CONFIG_SERIAL_8250_CONSOLE is not set
+CONFIG_SERIAL_8250_NR_UARTS=3
+CONFIG_SERIAL_8250_RUNTIME_UARTS=3
+# CONFIG_SERIAL_8250_EXTENDED is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_CORE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_LEGACY_PTYS is not set
+
+#
+# IPMI
+#
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_WATCHDOG is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_NVRAM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+
+#
+# TPM devices
+#
+# CONFIG_TCG_TPM is not set
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_CHARDEV=y
+
+#
+# I2C Algorithms
+#
+# CONFIG_I2C_ALGOBIT is not set
+# CONFIG_I2C_ALGOPCF is not set
+# CONFIG_I2C_ALGOPCA is not set
+
+#
+# I2C Hardware Bus support
+#
+# CONFIG_I2C_GPIO is not set
+# CONFIG_I2C_OCORES is not set
+CONFIG_I2C_OMAP=y
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_STUB is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_SENSORS_DS1337 is not set
+# CONFIG_SENSORS_DS1374 is not set
+# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_TPS65010 is not set
+# CONFIG_SENSORS_TLV320AIC23 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+
+#
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+
+#
+# Dallas's 1-wire bus
+#
+# CONFIG_W1 is not set
+# CONFIG_HWMON is not set
+
+#
+# Misc devices
+#
+# CONFIG_BLINK is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_SM501 is not set
+
+#
+# LED devices
+#
+# CONFIG_NEW_LEDS is not set
+
+#
+# LED drivers
+#
+
+#
+# LED Triggers
+#
+
+#
+# Multimedia devices
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+CONFIG_DAB=y
+
+#
+# Graphics support
+#
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+# CONFIG_VGASTATE is not set
+CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
+# CONFIG_FB_CFB_FILLRECT is not set
+# CONFIG_FB_CFB_COPYAREA is not set
+# CONFIG_FB_CFB_IMAGEBLIT is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_SYS_FOPS is not set
+CONFIG_FB_DEFERRED_IO=y
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_S1D13XXX is not set
+CONFIG_FB_OMAP=y
+# CONFIG_FB_OMAP_LCDC_EXTERNAL is not set
+# CONFIG_FB_OMAP_LCD_MIPID is not set
+CONFIG_FB_OMAP_BOOTLOADER_INIT=y
+CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE=2
+# CONFIG_FB_OMAP_DMA_TUNE is not set
+# CONFIG_FB_VIRTUAL is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
+CONFIG_FONTS=y
+# CONFIG_FONT_8x8 is not set
+# CONFIG_FONT_8x16 is not set
+# CONFIG_FONT_6x11 is not set
+# CONFIG_FONT_7x14 is not set
+# CONFIG_FONT_PEARL_8x8 is not set
+# CONFIG_FONT_ACORN_8x8 is not set
+CONFIG_FONT_MINI_4x6=y
+# CONFIG_FONT_CLEAN_4x6 is not set
+# CONFIG_FONT_CLEAN_5x8 is not set
+# CONFIG_FONT_SUN8x16 is not set
+# CONFIG_FONT_SUN12x22 is not set
+# CONFIG_FONT_10x18 is not set
+CONFIG_LOGO=y
+# CONFIG_LOGO_LINUX_MONO is not set
+# CONFIG_LOGO_LINUX_VGA16 is not set
+CONFIG_LOGO_LINUX_CLUT224=y
+
+#
+# Sound
+#
+CONFIG_SOUND=y
+
+#
+# Advanced Linux Sound Architecture
+#
+CONFIG_SND=y
+CONFIG_SND_TIMER=y
+CONFIG_SND_PCM=y
+# CONFIG_SND_SEQUENCER is not set
+CONFIG_SND_OSSEMUL=y
+CONFIG_SND_MIXER_OSS=y
+CONFIG_SND_PCM_OSS=y
+CONFIG_SND_PCM_OSS_PLUGINS=y
+# CONFIG_SND_DYNAMIC_MINORS is not set
+# CONFIG_SND_SUPPORT_OLD_API is not set
+# CONFIG_SND_VERBOSE_PROCFS is not set
+# CONFIG_SND_VERBOSE_PRINTK is not set
+# CONFIG_SND_DEBUG is not set
+
+#
+# Generic devices
+#
+# CONFIG_SND_DUMMY is not set
+# CONFIG_SND_MTPAV is not set
+# CONFIG_SND_SERIAL_U16550 is not set
+# CONFIG_SND_MPU401 is not set
+
+#
+# ALSA ARM devices
+#
+# CONFIG_SND_OMAP_AIC23 is not set
+# CONFIG_SND_OMAP_TSC2101 is not set
+CONFIG_SND_SX1=y
+# CONFIG_SND_OMAP_TSC2102 is not set
+# CONFIG_SND_OMAP24XX_EAC is not set
+
+#
+# System on Chip audio support
+#
+# CONFIG_SND_SOC is not set
+
+#
+# Open Sound System
+#
+# CONFIG_SOUND_PRIME is not set
+
+#
+# HID Devices
+#
+CONFIG_HID=y
+# CONFIG_HID_DEBUG is not set
+
+#
+# USB support
+#
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+# CONFIG_USB is not set
+# CONFIG_USB_MUSB_HDRC is not set
+# CONFIG_USB_GADGET_MUSB_HDRC is not set
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# USB Gadget Support
+#
+CONFIG_USB_GADGET=y
+# CONFIG_USB_GADGET_DEBUG_FILES is not set
+CONFIG_USB_GADGET_SELECTED=y
+# CONFIG_USB_GADGET_FSL_USB2 is not set
+# CONFIG_USB_GADGET_NET2280 is not set
+# CONFIG_USB_GADGET_PXA2XX is not set
+# CONFIG_USB_GADGET_GOKU is not set
+# CONFIG_USB_GADGET_LH7A40X is not set
+CONFIG_USB_GADGET_OMAP=y
+CONFIG_USB_OMAP=y
+# CONFIG_USB_GADGET_AT91 is not set
+# CONFIG_USB_GADGET_DUMMY_HCD is not set
+# CONFIG_USB_GADGET_DUALSPEED is not set
+# CONFIG_USB_ZERO is not set
+CONFIG_USB_ETH=y
+CONFIG_USB_ETH_RNDIS=y
+# CONFIG_USB_GADGETFS is not set
+# CONFIG_USB_FILE_STORAGE is not set
+# CONFIG_USB_G_SERIAL is not set
+# CONFIG_USB_MIDI_GADGET is not set
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+# CONFIG_MMC_UNSAFE_RESUME is not set
+
+#
+# MMC/SD Card Drivers
+#
+CONFIG_MMC_BLOCK=y
+
+#
+# MMC/SD Host Controller Drivers
+#
+CONFIG_MMC_OMAP=y
+
+#
+# Real Time Clock
+#
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+
+#
+# SPI RTC drivers
+#
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+CONFIG_RTC_DRV_OMAP=y
+
+#
+# CBUS support
+#
+# CONFIG_CBUS is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4DEV_FS is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+# CONFIG_DNOTIFY is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=866
+CONFIG_FAT_DEFAULT_IOCHARSET="koi8-r"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_RAMFS=y
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_CRAMFS=y
+# CONFIG_VXFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+
+#
+# Network File Systems
+#
+CONFIG_NFS_FS=y
+# CONFIG_NFS_V3 is not set
+# CONFIG_NFS_V4 is not set
+# CONFIG_NFS_DIRECTIO is not set
+# CONFIG_NFSD is not set
+CONFIG_ROOT_NFS=y
+CONFIG_LOCKD=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_SUNRPC_BIND34 is not set
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_BSD_DISKLABEL is not set
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_UNIXWARE_DISKLABEL is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+# CONFIG_SYSV68_PARTITION is not set
+
+#
+# Native Language Support
+#
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+CONFIG_NLS_CODEPAGE_866=y
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+CONFIG_NLS_CODEPAGE_1251=y
+# CONFIG_NLS_ASCII is not set
+CONFIG_NLS_ISO8859_1=y
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+CONFIG_NLS_ISO8859_5=y
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+CONFIG_NLS_KOI8_R=y
+# CONFIG_NLS_KOI8_U is not set
+CONFIG_NLS_UTF8=y
+
+#
+# Distributed Lock Manager
+#
+# CONFIG_DLM is not set
+
+#
+# Profiling support
+#
+CONFIG_PROFILING=y
+CONFIG_OPROFILE=y
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+# CONFIG_ENABLE_MUST_CHECK is not set
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+# CONFIG_DETECT_SOFTLOCKUP is not set
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+CONFIG_DEBUG_PREEMPT=y
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_LIST is not set
+CONFIG_FRAME_POINTER=y
+CONFIG_FORCED_INLINING=y
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_DEBUG_USER is not set
+# CONFIG_DEBUG_ERRORS is not set
+# CONFIG_DEBUG_LL is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+
+#
+# Cryptographic options
+#
+# CONFIG_CRYPTO is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_CRC_CCITT=y
+CONFIG_CRC16=y
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+CONFIG_LIBCRC32C=y
+CONFIG_ZLIB_INFLATE=y
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/usb-a9260_defconfig b/arch/arm/configs/usb-a9260_defconfig
index 3680bd2df26d..fcb4aaabd439 100644
--- a/arch/arm/configs/usb-a9260_defconfig
+++ b/arch/arm/configs/usb-a9260_defconfig
@@ -458,10 +458,10 @@ CONFIG_MTD_NAND=y
 # CONFIG_MTD_NAND_MUSEUM_IDS is not set
 CONFIG_MTD_NAND_IDS=y
 # CONFIG_MTD_NAND_DISKONCHIP is not set
-CONFIG_MTD_NAND_AT91=y
-CONFIG_MTD_NAND_AT91_ECC_SOFT=y
-# CONFIG_MTD_NAND_AT91_ECC_HW is not set
-# CONFIG_MTD_NAND_AT91_ECC_NONE is not set
+CONFIG_MTD_NAND_ATMEL=y
+CONFIG_MTD_NAND_ATMEL_ECC_SOFT=y
+# CONFIG_MTD_NAND_ATMEL_ECC_HW is not set
+# CONFIG_MTD_NAND_ATMEL_ECC_NONE is not set
 # CONFIG_MTD_NAND_NANDSIM is not set
 # CONFIG_MTD_NAND_PLATFORM is not set
 # CONFIG_MTD_ALAUDA is not set
diff --git a/arch/arm/configs/usb-a9263_defconfig b/arch/arm/configs/usb-a9263_defconfig
index 48d455bc7363..b786e0407e8e 100644
--- a/arch/arm/configs/usb-a9263_defconfig
+++ b/arch/arm/configs/usb-a9263_defconfig
@@ -450,10 +450,10 @@ CONFIG_MTD_NAND=y
 # CONFIG_MTD_NAND_MUSEUM_IDS is not set
 CONFIG_MTD_NAND_IDS=y
 # CONFIG_MTD_NAND_DISKONCHIP is not set
-CONFIG_MTD_NAND_AT91=y
-CONFIG_MTD_NAND_AT91_ECC_SOFT=y
-# CONFIG_MTD_NAND_AT91_ECC_HW is not set
-# CONFIG_MTD_NAND_AT91_ECC_NONE is not set
+CONFIG_MTD_NAND_ATMEL=y
+CONFIG_MTD_NAND_ATMEL_ECC_SOFT=y
+# CONFIG_MTD_NAND_ATMEL_ECC_HW is not set
+# CONFIG_MTD_NAND_ATMEL_ECC_NONE is not set
 # CONFIG_MTD_NAND_NANDSIM is not set
 # CONFIG_MTD_NAND_PLATFORM is not set
 # CONFIG_MTD_ALAUDA is not set
diff --git a/arch/arm/configs/yl9200_defconfig b/arch/arm/configs/yl9200_defconfig
index 26de37f74686..a9f41c24c9dc 100644
--- a/arch/arm/configs/yl9200_defconfig
+++ b/arch/arm/configs/yl9200_defconfig
@@ -421,7 +421,7 @@ CONFIG_MTD_NAND=y
 # CONFIG_MTD_NAND_ECC_SMC is not set
 # CONFIG_MTD_NAND_MUSEUM_IDS is not set
 CONFIG_MTD_NAND_IDS=y
-CONFIG_MTD_NAND_AT91=y
+CONFIG_MTD_NAND_ATMEL=y
 # CONFIG_MTD_NAND_NANDSIM is not set
 CONFIG_MTD_NAND_PLATFORM=y
 # CONFIG_MTD_ALAUDA is not set
diff --git a/include/asm-arm/Kbuild b/arch/arm/include/asm/Kbuild
index 73237bd130a2..73237bd130a2 100644
--- a/include/asm-arm/Kbuild
+++ b/arch/arm/include/asm/Kbuild
diff --git a/include/asm-arm/a.out-core.h b/arch/arm/include/asm/a.out-core.h
index 93d04acaa31f..93d04acaa31f 100644
--- a/include/asm-arm/a.out-core.h
+++ b/arch/arm/include/asm/a.out-core.h
diff --git a/include/asm-arm/a.out.h b/arch/arm/include/asm/a.out.h
index 79489fdcc8b8..79489fdcc8b8 100644
--- a/include/asm-arm/a.out.h
+++ b/arch/arm/include/asm/a.out.h
diff --git a/include/asm-arm/assembler.h b/arch/arm/include/asm/assembler.h
index 911393b2c6f0..6116e4893c0a 100644
--- a/include/asm-arm/assembler.h
+++ b/arch/arm/include/asm/assembler.h
@@ -1,5 +1,5 @@
 /*
- *  linux/include/asm-arm/assembler.h
+ *  arch/arm/include/asm/assembler.h
  *
  *  Copyright (C) 1996-2000 Russell King
  *
diff --git a/arch/arm/include/asm/atomic.h b/arch/arm/include/asm/atomic.h
new file mode 100644
index 000000000000..325f881ccb50
--- /dev/null
+++ b/arch/arm/include/asm/atomic.h
@@ -0,0 +1,212 @@
+/*
+ *  arch/arm/include/asm/atomic.h
+ *
+ *  Copyright (C) 1996 Russell King.
+ *  Copyright (C) 2002 Deep Blue Solutions Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __ASM_ARM_ATOMIC_H
+#define __ASM_ARM_ATOMIC_H
+
+#include <linux/compiler.h>
+#include <asm/system.h>
+
+typedef struct { volatile int counter; } atomic_t;
+
+#define ATOMIC_INIT(i)	{ (i) }
+
+#ifdef __KERNEL__
+
+#define atomic_read(v)	((v)->counter)
+
+#if __LINUX_ARM_ARCH__ >= 6
+
+/*
+ * ARMv6 UP and SMP safe atomic ops.  We use load exclusive and
+ * store exclusive to ensure that these are atomic.  We may loop
+ * to ensure that the update happens.  Writing to 'v->counter'
+ * without using the following operations WILL break the atomic
+ * nature of these ops.
+ */
+static inline void atomic_set(atomic_t *v, int i)
+{
+	unsigned long tmp;
+
+	__asm__ __volatile__("@ atomic_set\n"
+"1:	ldrex	%0, [%1]\n"
+"	strex	%0, %2, [%1]\n"
+"	teq	%0, #0\n"
+"	bne	1b"
+	: "=&r" (tmp)
+	: "r" (&v->counter), "r" (i)
+	: "cc");
+}
+
+static inline int atomic_add_return(int i, atomic_t *v)
+{
+	unsigned long tmp;
+	int result;
+
+	__asm__ __volatile__("@ atomic_add_return\n"
+"1:	ldrex	%0, [%2]\n"
+"	add	%0, %0, %3\n"
+"	strex	%1, %0, [%2]\n"
+"	teq	%1, #0\n"
+"	bne	1b"
+	: "=&r" (result), "=&r" (tmp)
+	: "r" (&v->counter), "Ir" (i)
+	: "cc");
+
+	return result;
+}
+
+static inline int atomic_sub_return(int i, atomic_t *v)
+{
+	unsigned long tmp;
+	int result;
+
+	__asm__ __volatile__("@ atomic_sub_return\n"
+"1:	ldrex	%0, [%2]\n"
+"	sub	%0, %0, %3\n"
+"	strex	%1, %0, [%2]\n"
+"	teq	%1, #0\n"
+"	bne	1b"
+	: "=&r" (result), "=&r" (tmp)
+	: "r" (&v->counter), "Ir" (i)
+	: "cc");
+
+	return result;
+}
+
+static inline int atomic_cmpxchg(atomic_t *ptr, int old, int new)
+{
+	unsigned long oldval, res;
+
+	do {
+		__asm__ __volatile__("@ atomic_cmpxchg\n"
+		"ldrex	%1, [%2]\n"
+		"mov	%0, #0\n"
+		"teq	%1, %3\n"
+		"strexeq %0, %4, [%2]\n"
+		    : "=&r" (res), "=&r" (oldval)
+		    : "r" (&ptr->counter), "Ir" (old), "r" (new)
+		    : "cc");
+	} while (res);
+
+	return oldval;
+}
+
+static inline void atomic_clear_mask(unsigned long mask, unsigned long *addr)
+{
+	unsigned long tmp, tmp2;
+
+	__asm__ __volatile__("@ atomic_clear_mask\n"
+"1:	ldrex	%0, [%2]\n"
+"	bic	%0, %0, %3\n"
+"	strex	%1, %0, [%2]\n"
+"	teq	%1, #0\n"
+"	bne	1b"
+	: "=&r" (tmp), "=&r" (tmp2)
+	: "r" (addr), "Ir" (mask)
+	: "cc");
+}
+
+#else /* ARM_ARCH_6 */
+
+#include <asm/system.h>
+
+#ifdef CONFIG_SMP
+#error SMP not supported on pre-ARMv6 CPUs
+#endif
+
+#define atomic_set(v,i)	(((v)->counter) = (i))
+
+static inline int atomic_add_return(int i, atomic_t *v)
+{
+	unsigned long flags;
+	int val;
+
+	raw_local_irq_save(flags);
+	val = v->counter;
+	v->counter = val += i;
+	raw_local_irq_restore(flags);
+
+	return val;
+}
+
+static inline int atomic_sub_return(int i, atomic_t *v)
+{
+	unsigned long flags;
+	int val;
+
+	raw_local_irq_save(flags);
+	val = v->counter;
+	v->counter = val -= i;
+	raw_local_irq_restore(flags);
+
+	return val;
+}
+
+static inline int atomic_cmpxchg(atomic_t *v, int old, int new)
+{
+	int ret;
+	unsigned long flags;
+
+	raw_local_irq_save(flags);
+	ret = v->counter;
+	if (likely(ret == old))
+		v->counter = new;
+	raw_local_irq_restore(flags);
+
+	return ret;
+}
+
+static inline void atomic_clear_mask(unsigned long mask, unsigned long *addr)
+{
+	unsigned long flags;
+
+	raw_local_irq_save(flags);
+	*addr &= ~mask;
+	raw_local_irq_restore(flags);
+}
+
+#endif /* __LINUX_ARM_ARCH__ */
+
+#define atomic_xchg(v, new) (xchg(&((v)->counter), new))
+
+static inline int atomic_add_unless(atomic_t *v, int a, int u)
+{
+	int c, old;
+
+	c = atomic_read(v);
+	while (c != u && (old = atomic_cmpxchg((v), c, c + a)) != c)
+		c = old;
+	return c != u;
+}
+#define atomic_inc_not_zero(v) atomic_add_unless((v), 1, 0)
+
+#define atomic_add(i, v)	(void) atomic_add_return(i, v)
+#define atomic_inc(v)		(void) atomic_add_return(1, v)
+#define atomic_sub(i, v)	(void) atomic_sub_return(i, v)
+#define atomic_dec(v)		(void) atomic_sub_return(1, v)
+
+#define atomic_inc_and_test(v)	(atomic_add_return(1, v) == 0)
+#define atomic_dec_and_test(v)	(atomic_sub_return(1, v) == 0)
+#define atomic_inc_return(v)    (atomic_add_return(1, v))
+#define atomic_dec_return(v)    (atomic_sub_return(1, v))
+#define atomic_sub_and_test(i, v) (atomic_sub_return(i, v) == 0)
+
+#define atomic_add_negative(i,v) (atomic_add_return(i, v) < 0)
+
+/* Atomic operations are already serializing on ARM */
+#define smp_mb__before_atomic_dec()	barrier()
+#define smp_mb__after_atomic_dec()	barrier()
+#define smp_mb__before_atomic_inc()	barrier()
+#define smp_mb__after_atomic_inc()	barrier()
+
+#include <asm-generic/atomic.h>
+#endif
+#endif
diff --git a/include/asm-arm/auxvec.h b/arch/arm/include/asm/auxvec.h
index c0536f6b29a7..c0536f6b29a7 100644
--- a/include/asm-arm/auxvec.h
+++ b/arch/arm/include/asm/auxvec.h
diff --git a/arch/arm/include/asm/bitops.h b/arch/arm/include/asm/bitops.h
new file mode 100644
index 000000000000..9a1db20e032a
--- /dev/null
+++ b/arch/arm/include/asm/bitops.h
@@ -0,0 +1,340 @@
+/*
+ * Copyright 1995, Russell King.
+ * Various bits and pieces copyrights include:
+ *  Linus Torvalds (test_bit).
+ * Big endian support: Copyright 2001, Nicolas Pitre
+ *  reworked by rmk.
+ *
+ * bit 0 is the LSB of an "unsigned long" quantity.
+ *
+ * Please note that the code in this file should never be included
+ * from user space.  Many of these are not implemented in assembler
+ * since they would be too costly.  Also, they require privileged
+ * instructions (which are not available from user mode) to ensure
+ * that they are atomic.
+ */
+
+#ifndef __ASM_ARM_BITOPS_H
+#define __ASM_ARM_BITOPS_H
+
+#ifdef __KERNEL__
+
+#ifndef _LINUX_BITOPS_H
+#error only <linux/bitops.h> can be included directly
+#endif
+
+#include <linux/compiler.h>
+#include <asm/system.h>
+
+#define smp_mb__before_clear_bit()	mb()
+#define smp_mb__after_clear_bit()	mb()
+
+/*
+ * These functions are the basis of our bit ops.
+ *
+ * First, the atomic bitops. These use native endian.
+ */
+static inline void ____atomic_set_bit(unsigned int bit, volatile unsigned long *p)
+{
+	unsigned long flags;
+	unsigned long mask = 1UL << (bit & 31);
+
+	p += bit >> 5;
+
+	raw_local_irq_save(flags);
+	*p |= mask;
+	raw_local_irq_restore(flags);
+}
+
+static inline void ____atomic_clear_bit(unsigned int bit, volatile unsigned long *p)
+{
+	unsigned long flags;
+	unsigned long mask = 1UL << (bit & 31);
+
+	p += bit >> 5;
+
+	raw_local_irq_save(flags);
+	*p &= ~mask;
+	raw_local_irq_restore(flags);
+}
+
+static inline void ____atomic_change_bit(unsigned int bit, volatile unsigned long *p)
+{
+	unsigned long flags;
+	unsigned long mask = 1UL << (bit & 31);
+
+	p += bit >> 5;
+
+	raw_local_irq_save(flags);
+	*p ^= mask;
+	raw_local_irq_restore(flags);
+}
+
+static inline int
+____atomic_test_and_set_bit(unsigned int bit, volatile unsigned long *p)
+{
+	unsigned long flags;
+	unsigned int res;
+	unsigned long mask = 1UL << (bit & 31);
+
+	p += bit >> 5;
+
+	raw_local_irq_save(flags);
+	res = *p;
+	*p = res | mask;
+	raw_local_irq_restore(flags);
+
+	return res & mask;
+}
+
+static inline int
+____atomic_test_and_clear_bit(unsigned int bit, volatile unsigned long *p)
+{
+	unsigned long flags;
+	unsigned int res;
+	unsigned long mask = 1UL << (bit & 31);
+
+	p += bit >> 5;
+
+	raw_local_irq_save(flags);
+	res = *p;
+	*p = res & ~mask;
+	raw_local_irq_restore(flags);
+
+	return res & mask;
+}
+
+static inline int
+____atomic_test_and_change_bit(unsigned int bit, volatile unsigned long *p)
+{
+	unsigned long flags;
+	unsigned int res;
+	unsigned long mask = 1UL << (bit & 31);
+
+	p += bit >> 5;
+
+	raw_local_irq_save(flags);
+	res = *p;
+	*p = res ^ mask;
+	raw_local_irq_restore(flags);
+
+	return res & mask;
+}
+
+#include <asm-generic/bitops/non-atomic.h>
+
+/*
+ *  A note about Endian-ness.
+ *  -------------------------
+ *
+ * When the ARM is put into big endian mode via CR15, the processor
+ * merely swaps the order of bytes within words, thus:
+ *
+ *          ------------ physical data bus bits -----------
+ *          D31 ... D24  D23 ... D16  D15 ... D8  D7 ... D0
+ * little     byte 3       byte 2       byte 1      byte 0
+ * big        byte 0       byte 1       byte 2      byte 3
+ *
+ * This means that reading a 32-bit word at address 0 returns the same
+ * value irrespective of the endian mode bit.
+ *
+ * Peripheral devices should be connected with the data bus reversed in
+ * "Big Endian" mode.  ARM Application Note 61 is applicable, and is
+ * available from http://www.arm.com/.
+ *
+ * The following assumes that the data bus connectivity for big endian
+ * mode has been followed.
+ *
+ * Note that bit 0 is defined to be 32-bit word bit 0, not byte 0 bit 0.
+ */
+
+/*
+ * Little endian assembly bitops.  nr = 0 -> byte 0 bit 0.
+ */
+extern void _set_bit_le(int nr, volatile unsigned long * p);
+extern void _clear_bit_le(int nr, volatile unsigned long * p);
+extern void _change_bit_le(int nr, volatile unsigned long * p);
+extern int _test_and_set_bit_le(int nr, volatile unsigned long * p);
+extern int _test_and_clear_bit_le(int nr, volatile unsigned long * p);
+extern int _test_and_change_bit_le(int nr, volatile unsigned long * p);
+extern int _find_first_zero_bit_le(const void * p, unsigned size);
+extern int _find_next_zero_bit_le(const void * p, int size, int offset);
+extern int _find_first_bit_le(const unsigned long *p, unsigned size);
+extern int _find_next_bit_le(const unsigned long *p, int size, int offset);
+
+/*
+ * Big endian assembly bitops.  nr = 0 -> byte 3 bit 0.
+ */
+extern void _set_bit_be(int nr, volatile unsigned long * p);
+extern void _clear_bit_be(int nr, volatile unsigned long * p);
+extern void _change_bit_be(int nr, volatile unsigned long * p);
+extern int _test_and_set_bit_be(int nr, volatile unsigned long * p);
+extern int _test_and_clear_bit_be(int nr, volatile unsigned long * p);
+extern int _test_and_change_bit_be(int nr, volatile unsigned long * p);
+extern int _find_first_zero_bit_be(const void * p, unsigned size);
+extern int _find_next_zero_bit_be(const void * p, int size, int offset);
+extern int _find_first_bit_be(const unsigned long *p, unsigned size);
+extern int _find_next_bit_be(const unsigned long *p, int size, int offset);
+
+#ifndef CONFIG_SMP
+/*
+ * The __* form of bitops are non-atomic and may be reordered.
+ */
+#define	ATOMIC_BITOP_LE(name,nr,p)		\
+	(__builtin_constant_p(nr) ?		\
+	 ____atomic_##name(nr, p) :		\
+	 _##name##_le(nr,p))
+
+#define	ATOMIC_BITOP_BE(name,nr,p)		\
+	(__builtin_constant_p(nr) ?		\
+	 ____atomic_##name(nr, p) :		\
+	 _##name##_be(nr,p))
+#else
+#define ATOMIC_BITOP_LE(name,nr,p)	_##name##_le(nr,p)
+#define ATOMIC_BITOP_BE(name,nr,p)	_##name##_be(nr,p)
+#endif
+
+#define NONATOMIC_BITOP(name,nr,p)		\
+	(____nonatomic_##name(nr, p))
+
+#ifndef __ARMEB__
+/*
+ * These are the little endian, atomic definitions.
+ */
+#define set_bit(nr,p)			ATOMIC_BITOP_LE(set_bit,nr,p)
+#define clear_bit(nr,p)			ATOMIC_BITOP_LE(clear_bit,nr,p)
+#define change_bit(nr,p)		ATOMIC_BITOP_LE(change_bit,nr,p)
+#define test_and_set_bit(nr,p)		ATOMIC_BITOP_LE(test_and_set_bit,nr,p)
+#define test_and_clear_bit(nr,p)	ATOMIC_BITOP_LE(test_and_clear_bit,nr,p)
+#define test_and_change_bit(nr,p)	ATOMIC_BITOP_LE(test_and_change_bit,nr,p)
+#define find_first_zero_bit(p,sz)	_find_first_zero_bit_le(p,sz)
+#define find_next_zero_bit(p,sz,off)	_find_next_zero_bit_le(p,sz,off)
+#define find_first_bit(p,sz)		_find_first_bit_le(p,sz)
+#define find_next_bit(p,sz,off)		_find_next_bit_le(p,sz,off)
+
+#define WORD_BITOFF_TO_LE(x)		((x))
+
+#else
+
+/*
+ * These are the big endian, atomic definitions.
+ */
+#define set_bit(nr,p)			ATOMIC_BITOP_BE(set_bit,nr,p)
+#define clear_bit(nr,p)			ATOMIC_BITOP_BE(clear_bit,nr,p)
+#define change_bit(nr,p)		ATOMIC_BITOP_BE(change_bit,nr,p)
+#define test_and_set_bit(nr,p)		ATOMIC_BITOP_BE(test_and_set_bit,nr,p)
+#define test_and_clear_bit(nr,p)	ATOMIC_BITOP_BE(test_and_clear_bit,nr,p)
+#define test_and_change_bit(nr,p)	ATOMIC_BITOP_BE(test_and_change_bit,nr,p)
+#define find_first_zero_bit(p,sz)	_find_first_zero_bit_be(p,sz)
+#define find_next_zero_bit(p,sz,off)	_find_next_zero_bit_be(p,sz,off)
+#define find_first_bit(p,sz)		_find_first_bit_be(p,sz)
+#define find_next_bit(p,sz,off)		_find_next_bit_be(p,sz,off)
+
+#define WORD_BITOFF_TO_LE(x)		((x) ^ 0x18)
+
+#endif
+
+#if __LINUX_ARM_ARCH__ < 5
+
+#include <asm-generic/bitops/ffz.h>
+#include <asm-generic/bitops/__ffs.h>
+#include <asm-generic/bitops/fls.h>
+#include <asm-generic/bitops/ffs.h>
+
+#else
+
+static inline int constant_fls(int x)
+{
+	int r = 32;
+
+	if (!x)
+		return 0;
+	if (!(x & 0xffff0000u)) {
+		x <<= 16;
+		r -= 16;
+	}
+	if (!(x & 0xff000000u)) {
+		x <<= 8;
+		r -= 8;
+	}
+	if (!(x & 0xf0000000u)) {
+		x <<= 4;
+		r -= 4;
+	}
+	if (!(x & 0xc0000000u)) {
+		x <<= 2;
+		r -= 2;
+	}
+	if (!(x & 0x80000000u)) {
+		x <<= 1;
+		r -= 1;
+	}
+	return r;
+}
+
+/*
+ * On ARMv5 and above those functions can be implemented around
+ * the clz instruction for much better code efficiency.
+ */
+
+#define __fls(x) \
+	( __builtin_constant_p(x) ? constant_fls(x) : \
+	  ({ int __r; asm("clz\t%0, %1" : "=r"(__r) : "r"(x) : "cc"); 32-__r; }) )
+
+/* Implement fls() in C so that 64-bit args are suitably truncated */
+static inline int fls(int x)
+{
+	return __fls(x);
+}
+
+#define ffs(x) ({ unsigned long __t = (x); fls(__t & -__t); })
+#define __ffs(x) (ffs(x) - 1)
+#define ffz(x) __ffs( ~(x) )
+
+#endif
+
+#include <asm-generic/bitops/fls64.h>
+
+#include <asm-generic/bitops/sched.h>
+#include <asm-generic/bitops/hweight.h>
+#include <asm-generic/bitops/lock.h>
+
+/*
+ * Ext2 is defined to use little-endian byte ordering.
+ * These do not need to be atomic.
+ */
+#define ext2_set_bit(nr,p)			\
+		__test_and_set_bit(WORD_BITOFF_TO_LE(nr), (unsigned long *)(p))
+#define ext2_set_bit_atomic(lock,nr,p)          \
+                test_and_set_bit(WORD_BITOFF_TO_LE(nr), (unsigned long *)(p))
+#define ext2_clear_bit(nr,p)			\
+		__test_and_clear_bit(WORD_BITOFF_TO_LE(nr), (unsigned long *)(p))
+#define ext2_clear_bit_atomic(lock,nr,p)        \
+                test_and_clear_bit(WORD_BITOFF_TO_LE(nr), (unsigned long *)(p))
+#define ext2_test_bit(nr,p)			\
+		test_bit(WORD_BITOFF_TO_LE(nr), (unsigned long *)(p))
+#define ext2_find_first_zero_bit(p,sz)		\
+		_find_first_zero_bit_le(p,sz)
+#define ext2_find_next_zero_bit(p,sz,off)	\
+		_find_next_zero_bit_le(p,sz,off)
+#define ext2_find_next_bit(p, sz, off) \
+		_find_next_bit_le(p, sz, off)
+
+/*
+ * Minix is defined to use little-endian byte ordering.
+ * These do not need to be atomic.
+ */
+#define minix_set_bit(nr,p)			\
+		__set_bit(WORD_BITOFF_TO_LE(nr), (unsigned long *)(p))
+#define minix_test_bit(nr,p)			\
+		test_bit(WORD_BITOFF_TO_LE(nr), (unsigned long *)(p))
+#define minix_test_and_set_bit(nr,p)		\
+		__test_and_set_bit(WORD_BITOFF_TO_LE(nr), (unsigned long *)(p))
+#define minix_test_and_clear_bit(nr,p)		\
+		__test_and_clear_bit(WORD_BITOFF_TO_LE(nr), (unsigned long *)(p))
+#define minix_find_first_zero_bit(p,sz)		\
+		_find_first_zero_bit_le(p,sz)
+
+#endif /* __KERNEL__ */
+
+#endif /* _ARM_BITOPS_H */
diff --git a/include/asm-arm/bug.h b/arch/arm/include/asm/bug.h
index 7b62351f097d..7b62351f097d 100644
--- a/include/asm-arm/bug.h
+++ b/arch/arm/include/asm/bug.h
diff --git a/arch/arm/include/asm/bugs.h b/arch/arm/include/asm/bugs.h
new file mode 100644
index 000000000000..a97f1ea708d1
--- /dev/null
+++ b/arch/arm/include/asm/bugs.h
@@ -0,0 +1,21 @@
+/*
+ *  arch/arm/include/asm/bugs.h
+ *
+ *  Copyright (C) 1995-2003 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __ASM_BUGS_H
+#define __ASM_BUGS_H
+
+#ifdef CONFIG_MMU
+extern void check_writebuffer_bugs(void);
+
+#define check_bugs() check_writebuffer_bugs()
+#else
+#define check_bugs() do { } while (0)
+#endif
+
+#endif
diff --git a/arch/arm/include/asm/byteorder.h b/arch/arm/include/asm/byteorder.h
new file mode 100644
index 000000000000..d04a7a2bc2e9
--- /dev/null
+++ b/arch/arm/include/asm/byteorder.h
@@ -0,0 +1,55 @@
+/*
+ *  arch/arm/include/asm/byteorder.h
+ *
+ * ARM Endian-ness.  In little endian mode, the data bus is connected such
+ * that byte accesses appear as:
+ *  0 = d0...d7, 1 = d8...d15, 2 = d16...d23, 3 = d24...d31
+ * and word accesses (data or instruction) appear as:
+ *  d0...d31
+ *
+ * When in big endian mode, byte accesses appear as:
+ *  0 = d24...d31, 1 = d16...d23, 2 = d8...d15, 3 = d0...d7
+ * and word accesses (data or instruction) appear as:
+ *  d0...d31
+ */
+#ifndef __ASM_ARM_BYTEORDER_H
+#define __ASM_ARM_BYTEORDER_H
+
+#include <linux/compiler.h>
+#include <asm/types.h>
+
+#ifdef __ARMEB__
+# define __BIG_ENDIAN
+#else
+# define __LITTLE_ENDIAN
+#endif
+
+#define __SWAB_64_THRU_32__
+
+static inline __attribute_const__ __u32 __arch_swab32(__u32 x)
+{
+	__u32 t;
+
+#ifndef __thumb__
+	if (!__builtin_constant_p(x)) {
+		/*
+		 * The compiler needs a bit of a hint here to always do the
+		 * right thing and not screw it up to different degrees
+		 * depending on the gcc version.
+		 */
+		asm ("eor\t%0, %1, %1, ror #16" : "=r" (t) : "r" (x));
+	} else
+#endif
+		t = x ^ ((x << 16) | (x >> 16)); /* eor r1,r0,r0,ror #16 */
+
+	x = (x << 24) | (x >> 8);		/* mov r0,r0,ror #8      */
+	t &= ~0x00FF0000;			/* bic r1,r1,#0x00FF0000 */
+	x ^= (t >> 8);				/* eor r0,r0,r1,lsr #8   */
+
+	return x;
+}
+#define __arch_swab32 __arch_swab32
+
+#include <linux/byteorder.h>
+
+#endif
diff --git a/arch/arm/include/asm/cache.h b/arch/arm/include/asm/cache.h
new file mode 100644
index 000000000000..cb7a9e97fd7e
--- /dev/null
+++ b/arch/arm/include/asm/cache.h
@@ -0,0 +1,10 @@
+/*
+ *  arch/arm/include/asm/cache.h
+ */
+#ifndef __ASMARM_CACHE_H
+#define __ASMARM_CACHE_H
+
+#define L1_CACHE_SHIFT		5
+#define L1_CACHE_BYTES		(1 << L1_CACHE_SHIFT)
+
+#endif
diff --git a/arch/arm/include/asm/cacheflush.h b/arch/arm/include/asm/cacheflush.h
new file mode 100644
index 000000000000..9073d9c6567e
--- /dev/null
+++ b/arch/arm/include/asm/cacheflush.h
@@ -0,0 +1,537 @@
+/*
+ *  arch/arm/include/asm/cacheflush.h
+ *
+ *  Copyright (C) 1999-2002 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef _ASMARM_CACHEFLUSH_H
+#define _ASMARM_CACHEFLUSH_H
+
+#include <linux/sched.h>
+#include <linux/mm.h>
+
+#include <asm/glue.h>
+#include <asm/shmparam.h>
+
+#define CACHE_COLOUR(vaddr)	((vaddr & (SHMLBA - 1)) >> PAGE_SHIFT)
+
+/*
+ *	Cache Model
+ *	===========
+ */
+#undef _CACHE
+#undef MULTI_CACHE
+
+#if defined(CONFIG_CPU_CACHE_V3)
+# ifdef _CACHE
+#  define MULTI_CACHE 1
+# else
+#  define _CACHE v3
+# endif
+#endif
+
+#if defined(CONFIG_CPU_CACHE_V4)
+# ifdef _CACHE
+#  define MULTI_CACHE 1
+# else
+#  define _CACHE v4
+# endif
+#endif
+
+#if defined(CONFIG_CPU_ARM920T) || defined(CONFIG_CPU_ARM922T) || \
+    defined(CONFIG_CPU_ARM925T) || defined(CONFIG_CPU_ARM1020)
+# define MULTI_CACHE 1
+#endif
+
+#if defined(CONFIG_CPU_ARM926T)
+# ifdef _CACHE
+#  define MULTI_CACHE 1
+# else
+#  define _CACHE arm926
+# endif
+#endif
+
+#if defined(CONFIG_CPU_ARM940T)
+# ifdef _CACHE
+#  define MULTI_CACHE 1
+# else
+#  define _CACHE arm940
+# endif
+#endif
+
+#if defined(CONFIG_CPU_ARM946E)
+# ifdef _CACHE
+#  define MULTI_CACHE 1
+# else
+#  define _CACHE arm946
+# endif
+#endif
+
+#if defined(CONFIG_CPU_CACHE_V4WB)
+# ifdef _CACHE
+#  define MULTI_CACHE 1
+# else
+#  define _CACHE v4wb
+# endif
+#endif
+
+#if defined(CONFIG_CPU_XSCALE)
+# ifdef _CACHE
+#  define MULTI_CACHE 1
+# else
+#  define _CACHE xscale
+# endif
+#endif
+
+#if defined(CONFIG_CPU_XSC3)
+# ifdef _CACHE
+#  define MULTI_CACHE 1
+# else
+#  define _CACHE xsc3
+# endif
+#endif
+
+#if defined(CONFIG_CPU_FEROCEON)
+# define MULTI_CACHE 1
+#endif
+
+#if defined(CONFIG_CPU_V6)
+//# ifdef _CACHE
+#  define MULTI_CACHE 1
+//# else
+//#  define _CACHE v6
+//# endif
+#endif
+
+#if defined(CONFIG_CPU_V7)
+//# ifdef _CACHE
+#  define MULTI_CACHE 1
+//# else
+//#  define _CACHE v7
+//# endif
+#endif
+
+#if !defined(_CACHE) && !defined(MULTI_CACHE)
+#error Unknown cache maintainence model
+#endif
+
+/*
+ * This flag is used to indicate that the page pointed to by a pte
+ * is dirty and requires cleaning before returning it to the user.
+ */
+#define PG_dcache_dirty PG_arch_1
+
+/*
+ *	MM Cache Management
+ *	===================
+ *
+ *	The arch/arm/mm/cache-*.S and arch/arm/mm/proc-*.S files
+ *	implement these methods.
+ *
+ *	Start addresses are inclusive and end addresses are exclusive;
+ *	start addresses should be rounded down, end addresses up.
+ *
+ *	See Documentation/cachetlb.txt for more information.
+ *	Please note that the implementation of these, and the required
+ *	effects are cache-type (VIVT/VIPT/PIPT) specific.
+ *
+ *	flush_cache_kern_all()
+ *
+ *		Unconditionally clean and invalidate the entire cache.
+ *
+ *	flush_cache_user_mm(mm)
+ *
+ *		Clean and invalidate all user space cache entries
+ *		before a change of page tables.
+ *
+ *	flush_cache_user_range(start, end, flags)
+ *
+ *		Clean and invalidate a range of cache entries in the
+ *		specified address space before a change of page tables.
+ *		- start - user start address (inclusive, page aligned)
+ *		- end   - user end address   (exclusive, page aligned)
+ *		- flags - vma->vm_flags field
+ *
+ *	coherent_kern_range(start, end)
+ *
+ *		Ensure coherency between the Icache and the Dcache in the
+ *		region described by start, end.  If you have non-snooping
+ *		Harvard caches, you need to implement this function.
+ *		- start  - virtual start address
+ *		- end    - virtual end address
+ *
+ *	DMA Cache Coherency
+ *	===================
+ *
+ *	dma_inv_range(start, end)
+ *
+ *		Invalidate (discard) the specified virtual address range.
+ *		May not write back any entries.  If 'start' or 'end'
+ *		are not cache line aligned, those lines must be written
+ *		back.
+ *		- start  - virtual start address
+ *		- end    - virtual end address
+ *
+ *	dma_clean_range(start, end)
+ *
+ *		Clean (write back) the specified virtual address range.
+ *		- start  - virtual start address
+ *		- end    - virtual end address
+ *
+ *	dma_flush_range(start, end)
+ *
+ *		Clean and invalidate the specified virtual address range.
+ *		- start  - virtual start address
+ *		- end    - virtual end address
+ */
+
+struct cpu_cache_fns {
+	void (*flush_kern_all)(void);
+	void (*flush_user_all)(void);
+	void (*flush_user_range)(unsigned long, unsigned long, unsigned int);
+
+	void (*coherent_kern_range)(unsigned long, unsigned long);
+	void (*coherent_user_range)(unsigned long, unsigned long);
+	void (*flush_kern_dcache_page)(void *);
+
+	void (*dma_inv_range)(const void *, const void *);
+	void (*dma_clean_range)(const void *, const void *);
+	void (*dma_flush_range)(const void *, const void *);
+};
+
+struct outer_cache_fns {
+	void (*inv_range)(unsigned long, unsigned long);
+	void (*clean_range)(unsigned long, unsigned long);
+	void (*flush_range)(unsigned long, unsigned long);
+};
+
+/*
+ * Select the calling method
+ */
+#ifdef MULTI_CACHE
+
+extern struct cpu_cache_fns cpu_cache;
+
+#define __cpuc_flush_kern_all		cpu_cache.flush_kern_all
+#define __cpuc_flush_user_all		cpu_cache.flush_user_all
+#define __cpuc_flush_user_range		cpu_cache.flush_user_range
+#define __cpuc_coherent_kern_range	cpu_cache.coherent_kern_range
+#define __cpuc_coherent_user_range	cpu_cache.coherent_user_range
+#define __cpuc_flush_dcache_page	cpu_cache.flush_kern_dcache_page
+
+/*
+ * These are private to the dma-mapping API.  Do not use directly.
+ * Their sole purpose is to ensure that data held in the cache
+ * is visible to DMA, or data written by DMA to system memory is
+ * visible to the CPU.
+ */
+#define dmac_inv_range			cpu_cache.dma_inv_range
+#define dmac_clean_range		cpu_cache.dma_clean_range
+#define dmac_flush_range		cpu_cache.dma_flush_range
+
+#else
+
+#define __cpuc_flush_kern_all		__glue(_CACHE,_flush_kern_cache_all)
+#define __cpuc_flush_user_all		__glue(_CACHE,_flush_user_cache_all)
+#define __cpuc_flush_user_range		__glue(_CACHE,_flush_user_cache_range)
+#define __cpuc_coherent_kern_range	__glue(_CACHE,_coherent_kern_range)
+#define __cpuc_coherent_user_range	__glue(_CACHE,_coherent_user_range)
+#define __cpuc_flush_dcache_page	__glue(_CACHE,_flush_kern_dcache_page)
+
+extern void __cpuc_flush_kern_all(void);
+extern void __cpuc_flush_user_all(void);
+extern void __cpuc_flush_user_range(unsigned long, unsigned long, unsigned int);
+extern void __cpuc_coherent_kern_range(unsigned long, unsigned long);
+extern void __cpuc_coherent_user_range(unsigned long, unsigned long);
+extern void __cpuc_flush_dcache_page(void *);
+
+/*
+ * These are private to the dma-mapping API.  Do not use directly.
+ * Their sole purpose is to ensure that data held in the cache
+ * is visible to DMA, or data written by DMA to system memory is
+ * visible to the CPU.
+ */
+#define dmac_inv_range			__glue(_CACHE,_dma_inv_range)
+#define dmac_clean_range		__glue(_CACHE,_dma_clean_range)
+#define dmac_flush_range		__glue(_CACHE,_dma_flush_range)
+
+extern void dmac_inv_range(const void *, const void *);
+extern void dmac_clean_range(const void *, const void *);
+extern void dmac_flush_range(const void *, const void *);
+
+#endif
+
+#ifdef CONFIG_OUTER_CACHE
+
+extern struct outer_cache_fns outer_cache;
+
+static inline void outer_inv_range(unsigned long start, unsigned long end)
+{
+	if (outer_cache.inv_range)
+		outer_cache.inv_range(start, end);
+}
+static inline void outer_clean_range(unsigned long start, unsigned long end)
+{
+	if (outer_cache.clean_range)
+		outer_cache.clean_range(start, end);
+}
+static inline void outer_flush_range(unsigned long start, unsigned long end)
+{
+	if (outer_cache.flush_range)
+		outer_cache.flush_range(start, end);
+}
+
+#else
+
+static inline void outer_inv_range(unsigned long start, unsigned long end)
+{ }
+static inline void outer_clean_range(unsigned long start, unsigned long end)
+{ }
+static inline void outer_flush_range(unsigned long start, unsigned long end)
+{ }
+
+#endif
+
+/*
+ * flush_cache_vmap() is used when creating mappings (eg, via vmap,
+ * vmalloc, ioremap etc) in kernel space for pages.  Since the
+ * direct-mappings of these pages may contain cached data, we need
+ * to do a full cache flush to ensure that writebacks don't corrupt
+ * data placed into these pages via the new mappings.
+ */
+#define flush_cache_vmap(start, end)		flush_cache_all()
+#define flush_cache_vunmap(start, end)		flush_cache_all()
+
+/*
+ * Copy user data from/to a page which is mapped into a different
+ * processes address space.  Really, we want to allow our "user
+ * space" model to handle this.
+ */
+#define copy_to_user_page(vma, page, vaddr, dst, src, len) \
+	do {							\
+		memcpy(dst, src, len);				\
+		flush_ptrace_access(vma, page, vaddr, dst, len, 1);\
+	} while (0)
+
+#define copy_from_user_page(vma, page, vaddr, dst, src, len) \
+	do {							\
+		memcpy(dst, src, len);				\
+	} while (0)
+
+/*
+ * Convert calls to our calling convention.
+ */
+#define flush_cache_all()		__cpuc_flush_kern_all()
+#ifndef CONFIG_CPU_CACHE_VIPT
+static inline void flush_cache_mm(struct mm_struct *mm)
+{
+	if (cpu_isset(smp_processor_id(), mm->cpu_vm_mask))
+		__cpuc_flush_user_all();
+}
+
+static inline void
+flush_cache_range(struct vm_area_struct *vma, unsigned long start, unsigned long end)
+{
+	if (cpu_isset(smp_processor_id(), vma->vm_mm->cpu_vm_mask))
+		__cpuc_flush_user_range(start & PAGE_MASK, PAGE_ALIGN(end),
+					vma->vm_flags);
+}
+
+static inline void
+flush_cache_page(struct vm_area_struct *vma, unsigned long user_addr, unsigned long pfn)
+{
+	if (cpu_isset(smp_processor_id(), vma->vm_mm->cpu_vm_mask)) {
+		unsigned long addr = user_addr & PAGE_MASK;
+		__cpuc_flush_user_range(addr, addr + PAGE_SIZE, vma->vm_flags);
+	}
+}
+
+static inline void
+flush_ptrace_access(struct vm_area_struct *vma, struct page *page,
+			 unsigned long uaddr, void *kaddr,
+			 unsigned long len, int write)
+{
+	if (cpu_isset(smp_processor_id(), vma->vm_mm->cpu_vm_mask)) {
+		unsigned long addr = (unsigned long)kaddr;
+		__cpuc_coherent_kern_range(addr, addr + len);
+	}
+}
+#else
+extern void flush_cache_mm(struct mm_struct *mm);
+extern void flush_cache_range(struct vm_area_struct *vma, unsigned long start, unsigned long end);
+extern void flush_cache_page(struct vm_area_struct *vma, unsigned long user_addr, unsigned long pfn);
+extern void flush_ptrace_access(struct vm_area_struct *vma, struct page *page,
+				unsigned long uaddr, void *kaddr,
+				unsigned long len, int write);
+#endif
+
+#define flush_cache_dup_mm(mm) flush_cache_mm(mm)
+
+/*
+ * flush_cache_user_range is used when we want to ensure that the
+ * Harvard caches are synchronised for the user space address range.
+ * This is used for the ARM private sys_cacheflush system call.
+ */
+#define flush_cache_user_range(vma,start,end) \
+	__cpuc_coherent_user_range((start) & PAGE_MASK, PAGE_ALIGN(end))
+
+/*
+ * Perform necessary cache operations to ensure that data previously
+ * stored within this range of addresses can be executed by the CPU.
+ */
+#define flush_icache_range(s,e)		__cpuc_coherent_kern_range(s,e)
+
+/*
+ * Perform necessary cache operations to ensure that the TLB will
+ * see data written in the specified area.
+ */
+#define clean_dcache_area(start,size)	cpu_dcache_clean_area(start, size)
+
+/*
+ * flush_dcache_page is used when the kernel has written to the page
+ * cache page at virtual address page->virtual.
+ *
+ * If this page isn't mapped (ie, page_mapping == NULL), or it might
+ * have userspace mappings, then we _must_ always clean + invalidate
+ * the dcache entries associated with the kernel mapping.
+ *
+ * Otherwise we can defer the operation, and clean the cache when we are
+ * about to change to user space.  This is the same method as used on SPARC64.
+ * See update_mmu_cache for the user space part.
+ */
+extern void flush_dcache_page(struct page *);
+
+extern void __flush_dcache_page(struct address_space *mapping, struct page *page);
+
+static inline void __flush_icache_all(void)
+{
+	asm("mcr	p15, 0, %0, c7, c5, 0	@ invalidate I-cache\n"
+	    :
+	    : "r" (0));
+}
+
+#define ARCH_HAS_FLUSH_ANON_PAGE
+static inline void flush_anon_page(struct vm_area_struct *vma,
+			 struct page *page, unsigned long vmaddr)
+{
+	extern void __flush_anon_page(struct vm_area_struct *vma,
+				struct page *, unsigned long);
+	if (PageAnon(page))
+		__flush_anon_page(vma, page, vmaddr);
+}
+
+#define flush_dcache_mmap_lock(mapping) \
+	spin_lock_irq(&(mapping)->tree_lock)
+#define flush_dcache_mmap_unlock(mapping) \
+	spin_unlock_irq(&(mapping)->tree_lock)
+
+#define flush_icache_user_range(vma,page,addr,len) \
+	flush_dcache_page(page)
+
+/*
+ * We don't appear to need to do anything here.  In fact, if we did, we'd
+ * duplicate cache flushing elsewhere performed by flush_dcache_page().
+ */
+#define flush_icache_page(vma,page)	do { } while (0)
+
+static inline void flush_ioremap_region(unsigned long phys, void __iomem *virt,
+	unsigned offset, size_t size)
+{
+	const void *start = (void __force *)virt + offset;
+	dmac_inv_range(start, start + size);
+}
+
+#define __cacheid_present(val)			(val != read_cpuid(CPUID_ID))
+#define __cacheid_type_v7(val)			((val & (7 << 29)) == (4 << 29))
+
+#define __cacheid_vivt_prev7(val)		((val & (15 << 25)) != (14 << 25))
+#define __cacheid_vipt_prev7(val)		((val & (15 << 25)) == (14 << 25))
+#define __cacheid_vipt_nonaliasing_prev7(val)	((val & (15 << 25 | 1 << 23)) == (14 << 25))
+#define __cacheid_vipt_aliasing_prev7(val)	((val & (15 << 25 | 1 << 23)) == (14 << 25 | 1 << 23))
+
+#define __cacheid_vivt(val)			(__cacheid_type_v7(val) ? 0 : __cacheid_vivt_prev7(val))
+#define __cacheid_vipt(val)			(__cacheid_type_v7(val) ? 1 : __cacheid_vipt_prev7(val))
+#define __cacheid_vipt_nonaliasing(val)		(__cacheid_type_v7(val) ? 1 : __cacheid_vipt_nonaliasing_prev7(val))
+#define __cacheid_vipt_aliasing(val)		(__cacheid_type_v7(val) ? 0 : __cacheid_vipt_aliasing_prev7(val))
+#define __cacheid_vivt_asid_tagged_instr(val)	(__cacheid_type_v7(val) ? ((val & (3 << 14)) == (1 << 14)) : 0)
+
+#if defined(CONFIG_CPU_CACHE_VIVT) && !defined(CONFIG_CPU_CACHE_VIPT)
+/*
+ * VIVT caches only
+ */
+#define cache_is_vivt()			1
+#define cache_is_vipt()			0
+#define cache_is_vipt_nonaliasing()	0
+#define cache_is_vipt_aliasing()	0
+#define icache_is_vivt_asid_tagged()	0
+
+#elif !defined(CONFIG_CPU_CACHE_VIVT) && defined(CONFIG_CPU_CACHE_VIPT)
+/*
+ * VIPT caches only
+ */
+#define cache_is_vivt()			0
+#define cache_is_vipt()			1
+#define cache_is_vipt_nonaliasing()					\
+	({								\
+		unsigned int __val = read_cpuid(CPUID_CACHETYPE);	\
+		__cacheid_vipt_nonaliasing(__val);			\
+	})
+
+#define cache_is_vipt_aliasing()					\
+	({								\
+		unsigned int __val = read_cpuid(CPUID_CACHETYPE);	\
+		__cacheid_vipt_aliasing(__val);				\
+	})
+
+#define icache_is_vivt_asid_tagged()					\
+	({								\
+		unsigned int __val = read_cpuid(CPUID_CACHETYPE);	\
+		__cacheid_vivt_asid_tagged_instr(__val);		\
+	})
+
+#else
+/*
+ * VIVT or VIPT caches.  Note that this is unreliable since ARM926
+ * and V6 CPUs satisfy the "(val & (15 << 25)) == (14 << 25)" test.
+ * There's no way to tell from the CacheType register what type (!)
+ * the cache is.
+ */
+#define cache_is_vivt()							\
+	({								\
+		unsigned int __val = read_cpuid(CPUID_CACHETYPE);	\
+		(!__cacheid_present(__val)) || __cacheid_vivt(__val);	\
+	})
+		
+#define cache_is_vipt()							\
+	({								\
+		unsigned int __val = read_cpuid(CPUID_CACHETYPE);	\
+		__cacheid_present(__val) && __cacheid_vipt(__val);	\
+	})
+
+#define cache_is_vipt_nonaliasing()					\
+	({								\
+		unsigned int __val = read_cpuid(CPUID_CACHETYPE);	\
+		__cacheid_present(__val) &&				\
+		 __cacheid_vipt_nonaliasing(__val);			\
+	})
+
+#define cache_is_vipt_aliasing()					\
+	({								\
+		unsigned int __val = read_cpuid(CPUID_CACHETYPE);	\
+		__cacheid_present(__val) &&				\
+		 __cacheid_vipt_aliasing(__val);			\
+	})
+
+#define icache_is_vivt_asid_tagged()					\
+	({								\
+		unsigned int __val = read_cpuid(CPUID_CACHETYPE);	\
+		__cacheid_present(__val) &&				\
+		 __cacheid_vivt_asid_tagged_instr(__val);		\
+	})
+
+#endif
+
+#endif
diff --git a/arch/arm/include/asm/checksum.h b/arch/arm/include/asm/checksum.h
new file mode 100644
index 000000000000..6dcc16430868
--- /dev/null
+++ b/arch/arm/include/asm/checksum.h
@@ -0,0 +1,139 @@
+/*
+ *  arch/arm/include/asm/checksum.h
+ *
+ * IP checksum routines
+ *
+ * Copyright (C) Original authors of ../asm-i386/checksum.h
+ * Copyright (C) 1996-1999 Russell King
+ */
+#ifndef __ASM_ARM_CHECKSUM_H
+#define __ASM_ARM_CHECKSUM_H
+
+#include <linux/in6.h>
+
+/*
+ * computes the checksum of a memory block at buff, length len,
+ * and adds in "sum" (32-bit)
+ *
+ * returns a 32-bit number suitable for feeding into itself
+ * or csum_tcpudp_magic
+ *
+ * this function must be called with even lengths, except
+ * for the last fragment, which may be odd
+ *
+ * it's best to have buff aligned on a 32-bit boundary
+ */
+__wsum csum_partial(const void *buff, int len, __wsum sum);
+
+/*
+ * the same as csum_partial, but copies from src while it
+ * checksums, and handles user-space pointer exceptions correctly, when needed.
+ *
+ * here even more important to align src and dst on a 32-bit (or even
+ * better 64-bit) boundary
+ */
+
+__wsum
+csum_partial_copy_nocheck(const void *src, void *dst, int len, __wsum sum);
+
+__wsum
+csum_partial_copy_from_user(const void __user *src, void *dst, int len, __wsum sum, int *err_ptr);
+
+/*
+ * 	Fold a partial checksum without adding pseudo headers
+ */
+static inline __sum16 csum_fold(__wsum sum)
+{
+	__asm__(
+	"add	%0, %1, %1, ror #16	@ csum_fold"
+	: "=r" (sum)
+	: "r" (sum)
+	: "cc");
+	return (__force __sum16)(~(__force u32)sum >> 16);
+}
+
+/*
+ *	This is a version of ip_compute_csum() optimized for IP headers,
+ *	which always checksum on 4 octet boundaries.
+ */
+static inline __sum16
+ip_fast_csum(const void *iph, unsigned int ihl)
+{
+	unsigned int tmp1;
+	__wsum sum;
+
+	__asm__ __volatile__(
+	"ldr	%0, [%1], #4		@ ip_fast_csum		\n\
+	ldr	%3, [%1], #4					\n\
+	sub	%2, %2, #5					\n\
+	adds	%0, %0, %3					\n\
+	ldr	%3, [%1], #4					\n\
+	adcs	%0, %0, %3					\n\
+	ldr	%3, [%1], #4					\n\
+1:	adcs	%0, %0, %3					\n\
+	ldr	%3, [%1], #4					\n\
+	tst	%2, #15			@ do this carefully	\n\
+	subne	%2, %2, #1		@ without destroying	\n\
+	bne	1b			@ the carry flag	\n\
+	adcs	%0, %0, %3					\n\
+	adc	%0, %0, #0"
+	: "=r" (sum), "=r" (iph), "=r" (ihl), "=r" (tmp1)
+	: "1" (iph), "2" (ihl)
+	: "cc", "memory");
+	return csum_fold(sum);
+}
+
+static inline __wsum
+csum_tcpudp_nofold(__be32 saddr, __be32 daddr, unsigned short len,
+		   unsigned short proto, __wsum sum)
+{
+	__asm__(
+	"adds	%0, %1, %2		@ csum_tcpudp_nofold	\n\
+	adcs	%0, %0, %3					\n"
+#ifdef __ARMEB__
+	"adcs	%0, %0, %4					\n"
+#else
+	"adcs	%0, %0, %4, lsl #8				\n"
+#endif
+	"adcs	%0, %0, %5					\n\
+	adc	%0, %0, #0"
+	: "=&r"(sum)
+	: "r" (sum), "r" (daddr), "r" (saddr), "r" (len), "Ir" (htons(proto))
+	: "cc");
+	return sum;
+}	
+/*
+ * computes the checksum of the TCP/UDP pseudo-header
+ * returns a 16-bit checksum, already complemented
+ */
+static inline __sum16
+csum_tcpudp_magic(__be32 saddr, __be32 daddr, unsigned short len,
+		  unsigned short proto, __wsum sum)
+{
+	return csum_fold(csum_tcpudp_nofold(saddr, daddr, len, proto, sum));
+}
+
+
+/*
+ * this routine is used for miscellaneous IP-like checksums, mainly
+ * in icmp.c
+ */
+static inline __sum16
+ip_compute_csum(const void *buff, int len)
+{
+	return csum_fold(csum_partial(buff, len, 0));
+}
+
+#define _HAVE_ARCH_IPV6_CSUM
+extern __wsum
+__csum_ipv6_magic(const struct in6_addr *saddr, const struct in6_addr *daddr, __be32 len,
+		__be32 proto, __wsum sum);
+
+static inline __sum16
+csum_ipv6_magic(const struct in6_addr *saddr, const struct in6_addr *daddr, __u32 len,
+		unsigned short proto, __wsum sum)
+{
+	return csum_fold(__csum_ipv6_magic(saddr, daddr, htonl(len),
+					   htonl(proto), sum));
+}
+#endif
diff --git a/include/asm-arm/cnt32_to_63.h b/arch/arm/include/asm/cnt32_to_63.h
index 480c873fa746..480c873fa746 100644
--- a/include/asm-arm/cnt32_to_63.h
+++ b/arch/arm/include/asm/cnt32_to_63.h
diff --git a/include/asm-arm/cpu-multi32.h b/arch/arm/include/asm/cpu-multi32.h
index 3479de9266e5..e2b5b0b2116a 100644
--- a/include/asm-arm/cpu-multi32.h
+++ b/arch/arm/include/asm/cpu-multi32.h
@@ -1,5 +1,5 @@
 /*
- *  linux/include/asm-arm/cpu-multi32.h
+ *  arch/arm/include/asm/cpu-multi32.h
  *
  *  Copyright (C) 2000 Russell King
  *
diff --git a/include/asm-arm/cpu-single.h b/arch/arm/include/asm/cpu-single.h
index 0b120ee36091..f073a6d2a406 100644
--- a/include/asm-arm/cpu-single.h
+++ b/arch/arm/include/asm/cpu-single.h
@@ -1,5 +1,5 @@
 /*
- *  linux/include/asm-arm/cpu-single.h
+ *  arch/arm/include/asm/cpu-single.h
  *
  *  Copyright (C) 2000 Russell King
  *
diff --git a/arch/arm/include/asm/cpu.h b/arch/arm/include/asm/cpu.h
new file mode 100644
index 000000000000..634b2d7c612a
--- /dev/null
+++ b/arch/arm/include/asm/cpu.h
@@ -0,0 +1,25 @@
+/*
+ *  arch/arm/include/asm/cpu.h
+ *
+ *  Copyright (C) 2004-2005 ARM Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __ASM_ARM_CPU_H
+#define __ASM_ARM_CPU_H
+
+#include <linux/percpu.h>
+
+struct cpuinfo_arm {
+	struct cpu	cpu;
+#ifdef CONFIG_SMP
+	struct task_struct *idle;
+	unsigned int	loops_per_jiffy;
+#endif
+};
+
+DECLARE_PER_CPU(struct cpuinfo_arm, cpu_data);
+
+#endif
diff --git a/include/asm-arm/cputime.h b/arch/arm/include/asm/cputime.h
index 3a8002a5fec7..3a8002a5fec7 100644
--- a/include/asm-arm/cputime.h
+++ b/arch/arm/include/asm/cputime.h
diff --git a/include/asm-arm/current.h b/arch/arm/include/asm/current.h
index 75d21e2a3ff7..75d21e2a3ff7 100644
--- a/include/asm-arm/current.h
+++ b/arch/arm/include/asm/current.h
diff --git a/include/asm-arm/delay.h b/arch/arm/include/asm/delay.h
index b2deda181549..b2deda181549 100644
--- a/include/asm-arm/delay.h
+++ b/arch/arm/include/asm/delay.h
diff --git a/include/asm-arm/device.h b/arch/arm/include/asm/device.h
index c61642b40603..c61642b40603 100644
--- a/include/asm-arm/device.h
+++ b/arch/arm/include/asm/device.h
diff --git a/include/asm-arm/div64.h b/arch/arm/include/asm/div64.h
index 5001390be958..5001390be958 100644
--- a/include/asm-arm/div64.h
+++ b/arch/arm/include/asm/div64.h
diff --git a/arch/arm/include/asm/dma-mapping.h b/arch/arm/include/asm/dma-mapping.h
new file mode 100644
index 000000000000..7b95d2058395
--- /dev/null
+++ b/arch/arm/include/asm/dma-mapping.h
@@ -0,0 +1,512 @@
+#ifndef ASMARM_DMA_MAPPING_H
+#define ASMARM_DMA_MAPPING_H
+
+#ifdef __KERNEL__
+
+#include <linux/mm_types.h>
+#include <linux/scatterlist.h>
+
+#include <asm-generic/dma-coherent.h>
+#include <asm/memory.h>
+
+/*
+ * page_to_dma/dma_to_virt/virt_to_dma are architecture private functions
+ * used internally by the DMA-mapping API to provide DMA addresses. They
+ * must not be used by drivers.
+ */
+#ifndef __arch_page_to_dma
+static inline dma_addr_t page_to_dma(struct device *dev, struct page *page)
+{
+	return (dma_addr_t)__virt_to_bus((unsigned long)page_address(page));
+}
+
+static inline void *dma_to_virt(struct device *dev, dma_addr_t addr)
+{
+	return (void *)__bus_to_virt(addr);
+}
+
+static inline dma_addr_t virt_to_dma(struct device *dev, void *addr)
+{
+	return (dma_addr_t)__virt_to_bus((unsigned long)(addr));
+}
+#else
+static inline dma_addr_t page_to_dma(struct device *dev, struct page *page)
+{
+	return __arch_page_to_dma(dev, page);
+}
+
+static inline void *dma_to_virt(struct device *dev, dma_addr_t addr)
+{
+	return __arch_dma_to_virt(dev, addr);
+}
+
+static inline dma_addr_t virt_to_dma(struct device *dev, void *addr)
+{
+	return __arch_virt_to_dma(dev, addr);
+}
+#endif
+
+/*
+ * DMA-consistent mapping functions.  These allocate/free a region of
+ * uncached, unwrite-buffered mapped memory space for use with DMA
+ * devices.  This is the "generic" version.  The PCI specific version
+ * is in pci.h
+ *
+ * Note: Drivers should NOT use this function directly, as it will break
+ * platforms with CONFIG_DMABOUNCE.
+ * Use the driver DMA support - see dma-mapping.h (dma_sync_*)
+ */
+extern void dma_cache_maint(const void *kaddr, size_t size, int rw);
+
+/*
+ * Return whether the given device DMA address mask can be supported
+ * properly.  For example, if your device can only drive the low 24-bits
+ * during bus mastering, then you would pass 0x00ffffff as the mask
+ * to this function.
+ *
+ * FIXME: This should really be a platform specific issue - we should
+ * return false if GFP_DMA allocations may not satisfy the supplied 'mask'.
+ */
+static inline int dma_supported(struct device *dev, u64 mask)
+{
+	return dev->dma_mask && *dev->dma_mask != 0;
+}
+
+static inline int dma_set_mask(struct device *dev, u64 dma_mask)
+{
+	if (!dev->dma_mask || !dma_supported(dev, dma_mask))
+		return -EIO;
+
+	*dev->dma_mask = dma_mask;
+
+	return 0;
+}
+
+static inline int dma_get_cache_alignment(void)
+{
+	return 32;
+}
+
+static inline int dma_is_consistent(struct device *dev, dma_addr_t handle)
+{
+	return !!arch_is_coherent();
+}
+
+/*
+ * DMA errors are defined by all-bits-set in the DMA address.
+ */
+static inline int dma_mapping_error(struct device *dev, dma_addr_t dma_addr)
+{
+	return dma_addr == ~0;
+}
+
+/*
+ * Dummy noncoherent implementation.  We don't provide a dma_cache_sync
+ * function so drivers using this API are highlighted with build warnings.
+ */
+static inline void *
+dma_alloc_noncoherent(struct device *dev, size_t size, dma_addr_t *handle, gfp_t gfp)
+{
+	return NULL;
+}
+
+static inline void
+dma_free_noncoherent(struct device *dev, size_t size, void *cpu_addr,
+		     dma_addr_t handle)
+{
+}
+
+/**
+ * dma_alloc_coherent - allocate consistent memory for DMA
+ * @dev: valid struct device pointer, or NULL for ISA and EISA-like devices
+ * @size: required memory size
+ * @handle: bus-specific DMA address
+ *
+ * Allocate some uncached, unbuffered memory for a device for
+ * performing DMA.  This function allocates pages, and will
+ * return the CPU-viewed address, and sets @handle to be the
+ * device-viewed address.
+ */
+extern void *
+dma_alloc_coherent(struct device *dev, size_t size, dma_addr_t *handle, gfp_t gfp);
+
+/**
+ * dma_free_coherent - free memory allocated by dma_alloc_coherent
+ * @dev: valid struct device pointer, or NULL for ISA and EISA-like devices
+ * @size: size of memory originally requested in dma_alloc_coherent
+ * @cpu_addr: CPU-view address returned from dma_alloc_coherent
+ * @handle: device-view address returned from dma_alloc_coherent
+ *
+ * Free (and unmap) a DMA buffer previously allocated by
+ * dma_alloc_coherent().
+ *
+ * References to memory and mappings associated with cpu_addr/handle
+ * during and after this call executing are illegal.
+ */
+extern void
+dma_free_coherent(struct device *dev, size_t size, void *cpu_addr,
+		  dma_addr_t handle);
+
+/**
+ * dma_mmap_coherent - map a coherent DMA allocation into user space
+ * @dev: valid struct device pointer, or NULL for ISA and EISA-like devices
+ * @vma: vm_area_struct describing requested user mapping
+ * @cpu_addr: kernel CPU-view address returned from dma_alloc_coherent
+ * @handle: device-view address returned from dma_alloc_coherent
+ * @size: size of memory originally requested in dma_alloc_coherent
+ *
+ * Map a coherent DMA buffer previously allocated by dma_alloc_coherent
+ * into user space.  The coherent DMA buffer must not be freed by the
+ * driver until the user space mapping has been released.
+ */
+int dma_mmap_coherent(struct device *dev, struct vm_area_struct *vma,
+		      void *cpu_addr, dma_addr_t handle, size_t size);
+
+
+/**
+ * dma_alloc_writecombine - allocate writecombining memory for DMA
+ * @dev: valid struct device pointer, or NULL for ISA and EISA-like devices
+ * @size: required memory size
+ * @handle: bus-specific DMA address
+ *
+ * Allocate some uncached, buffered memory for a device for
+ * performing DMA.  This function allocates pages, and will
+ * return the CPU-viewed address, and sets @handle to be the
+ * device-viewed address.
+ */
+extern void *
+dma_alloc_writecombine(struct device *dev, size_t size, dma_addr_t *handle, gfp_t gfp);
+
+#define dma_free_writecombine(dev,size,cpu_addr,handle) \
+	dma_free_coherent(dev,size,cpu_addr,handle)
+
+int dma_mmap_writecombine(struct device *dev, struct vm_area_struct *vma,
+			  void *cpu_addr, dma_addr_t handle, size_t size);
+
+
+/**
+ * dma_map_single - map a single buffer for streaming DMA
+ * @dev: valid struct device pointer, or NULL for ISA and EISA-like devices
+ * @cpu_addr: CPU direct mapped address of buffer
+ * @size: size of buffer to map
+ * @dir: DMA transfer direction
+ *
+ * Ensure that any data held in the cache is appropriately discarded
+ * or written back.
+ *
+ * The device owns this memory once this call has completed.  The CPU
+ * can regain ownership by calling dma_unmap_single() or
+ * dma_sync_single_for_cpu().
+ */
+#ifndef CONFIG_DMABOUNCE
+static inline dma_addr_t
+dma_map_single(struct device *dev, void *cpu_addr, size_t size,
+	       enum dma_data_direction dir)
+{
+	if (!arch_is_coherent())
+		dma_cache_maint(cpu_addr, size, dir);
+
+	return virt_to_dma(dev, cpu_addr);
+}
+#else
+extern dma_addr_t dma_map_single(struct device *,void *, size_t, enum dma_data_direction);
+#endif
+
+/**
+ * dma_map_page - map a portion of a page for streaming DMA
+ * @dev: valid struct device pointer, or NULL for ISA and EISA-like devices
+ * @page: page that buffer resides in
+ * @offset: offset into page for start of buffer
+ * @size: size of buffer to map
+ * @dir: DMA transfer direction
+ *
+ * Ensure that any data held in the cache is appropriately discarded
+ * or written back.
+ *
+ * The device owns this memory once this call has completed.  The CPU
+ * can regain ownership by calling dma_unmap_page() or
+ * dma_sync_single_for_cpu().
+ */
+static inline dma_addr_t
+dma_map_page(struct device *dev, struct page *page,
+	     unsigned long offset, size_t size,
+	     enum dma_data_direction dir)
+{
+	return dma_map_single(dev, page_address(page) + offset, size, dir);
+}
+
+/**
+ * dma_unmap_single - unmap a single buffer previously mapped
+ * @dev: valid struct device pointer, or NULL for ISA and EISA-like devices
+ * @handle: DMA address of buffer
+ * @size: size of buffer to map
+ * @dir: DMA transfer direction
+ *
+ * Unmap a single streaming mode DMA translation.  The handle and size
+ * must match what was provided in the previous dma_map_single() call.
+ * All other usages are undefined.
+ *
+ * After this call, reads by the CPU to the buffer are guaranteed to see
+ * whatever the device wrote there.
+ */
+#ifndef CONFIG_DMABOUNCE
+static inline void
+dma_unmap_single(struct device *dev, dma_addr_t handle, size_t size,
+		 enum dma_data_direction dir)
+{
+	/* nothing to do */
+}
+#else
+extern void dma_unmap_single(struct device *, dma_addr_t, size_t, enum dma_data_direction);
+#endif
+
+/**
+ * dma_unmap_page - unmap a buffer previously mapped through dma_map_page()
+ * @dev: valid struct device pointer, or NULL for ISA and EISA-like devices
+ * @handle: DMA address of buffer
+ * @size: size of buffer to map
+ * @dir: DMA transfer direction
+ *
+ * Unmap a single streaming mode DMA translation.  The handle and size
+ * must match what was provided in the previous dma_map_single() call.
+ * All other usages are undefined.
+ *
+ * After this call, reads by the CPU to the buffer are guaranteed to see
+ * whatever the device wrote there.
+ */
+static inline void
+dma_unmap_page(struct device *dev, dma_addr_t handle, size_t size,
+	       enum dma_data_direction dir)
+{
+	dma_unmap_single(dev, handle, size, dir);
+}
+
+/**
+ * dma_map_sg - map a set of SG buffers for streaming mode DMA
+ * @dev: valid struct device pointer, or NULL for ISA and EISA-like devices
+ * @sg: list of buffers
+ * @nents: number of buffers to map
+ * @dir: DMA transfer direction
+ *
+ * Map a set of buffers described by scatterlist in streaming
+ * mode for DMA.  This is the scatter-gather version of the
+ * above dma_map_single interface.  Here the scatter gather list
+ * elements are each tagged with the appropriate dma address
+ * and length.  They are obtained via sg_dma_{address,length}(SG).
+ *
+ * NOTE: An implementation may be able to use a smaller number of
+ *       DMA address/length pairs than there are SG table elements.
+ *       (for example via virtual mapping capabilities)
+ *       The routine returns the number of addr/length pairs actually
+ *       used, at most nents.
+ *
+ * Device ownership issues as mentioned above for dma_map_single are
+ * the same here.
+ */
+#ifndef CONFIG_DMABOUNCE
+static inline int
+dma_map_sg(struct device *dev, struct scatterlist *sg, int nents,
+	   enum dma_data_direction dir)
+{
+	int i;
+
+	for (i = 0; i < nents; i++, sg++) {
+		char *virt;
+
+		sg->dma_address = page_to_dma(dev, sg_page(sg)) + sg->offset;
+		virt = sg_virt(sg);
+
+		if (!arch_is_coherent())
+			dma_cache_maint(virt, sg->length, dir);
+	}
+
+	return nents;
+}
+#else
+extern int dma_map_sg(struct device *, struct scatterlist *, int, enum dma_data_direction);
+#endif
+
+/**
+ * dma_unmap_sg - unmap a set of SG buffers mapped by dma_map_sg
+ * @dev: valid struct device pointer, or NULL for ISA and EISA-like devices
+ * @sg: list of buffers
+ * @nents: number of buffers to map
+ * @dir: DMA transfer direction
+ *
+ * Unmap a set of streaming mode DMA translations.
+ * Again, CPU read rules concerning calls here are the same as for
+ * dma_unmap_single() above.
+ */
+#ifndef CONFIG_DMABOUNCE
+static inline void
+dma_unmap_sg(struct device *dev, struct scatterlist *sg, int nents,
+	     enum dma_data_direction dir)
+{
+
+	/* nothing to do */
+}
+#else
+extern void dma_unmap_sg(struct device *, struct scatterlist *, int, enum dma_data_direction);
+#endif
+
+
+/**
+ * dma_sync_single_range_for_cpu
+ * @dev: valid struct device pointer, or NULL for ISA and EISA-like devices
+ * @handle: DMA address of buffer
+ * @offset: offset of region to start sync
+ * @size: size of region to sync
+ * @dir: DMA transfer direction (same as passed to dma_map_single)
+ *
+ * Make physical memory consistent for a single streaming mode DMA
+ * translation after a transfer.
+ *
+ * If you perform a dma_map_single() but wish to interrogate the
+ * buffer using the cpu, yet do not wish to teardown the PCI dma
+ * mapping, you must call this function before doing so.  At the
+ * next point you give the PCI dma address back to the card, you
+ * must first the perform a dma_sync_for_device, and then the
+ * device again owns the buffer.
+ */
+#ifndef CONFIG_DMABOUNCE
+static inline void
+dma_sync_single_range_for_cpu(struct device *dev, dma_addr_t handle,
+			      unsigned long offset, size_t size,
+			      enum dma_data_direction dir)
+{
+	if (!arch_is_coherent())
+		dma_cache_maint(dma_to_virt(dev, handle) + offset, size, dir);
+}
+
+static inline void
+dma_sync_single_range_for_device(struct device *dev, dma_addr_t handle,
+				 unsigned long offset, size_t size,
+				 enum dma_data_direction dir)
+{
+	if (!arch_is_coherent())
+		dma_cache_maint(dma_to_virt(dev, handle) + offset, size, dir);
+}
+#else
+extern void dma_sync_single_range_for_cpu(struct device *, dma_addr_t, unsigned long, size_t, enum dma_data_direction);
+extern void dma_sync_single_range_for_device(struct device *, dma_addr_t, unsigned long, size_t, enum dma_data_direction);
+#endif
+
+static inline void
+dma_sync_single_for_cpu(struct device *dev, dma_addr_t handle, size_t size,
+			enum dma_data_direction dir)
+{
+	dma_sync_single_range_for_cpu(dev, handle, 0, size, dir);
+}
+
+static inline void
+dma_sync_single_for_device(struct device *dev, dma_addr_t handle, size_t size,
+			   enum dma_data_direction dir)
+{
+	dma_sync_single_range_for_device(dev, handle, 0, size, dir);
+}
+
+
+/**
+ * dma_sync_sg_for_cpu
+ * @dev: valid struct device pointer, or NULL for ISA and EISA-like devices
+ * @sg: list of buffers
+ * @nents: number of buffers to map
+ * @dir: DMA transfer direction
+ *
+ * Make physical memory consistent for a set of streaming
+ * mode DMA translations after a transfer.
+ *
+ * The same as dma_sync_single_for_* but for a scatter-gather list,
+ * same rules and usage.
+ */
+#ifndef CONFIG_DMABOUNCE
+static inline void
+dma_sync_sg_for_cpu(struct device *dev, struct scatterlist *sg, int nents,
+		    enum dma_data_direction dir)
+{
+	int i;
+
+	for (i = 0; i < nents; i++, sg++) {
+		char *virt = sg_virt(sg);
+		if (!arch_is_coherent())
+			dma_cache_maint(virt, sg->length, dir);
+	}
+}
+
+static inline void
+dma_sync_sg_for_device(struct device *dev, struct scatterlist *sg, int nents,
+		       enum dma_data_direction dir)
+{
+	int i;
+
+	for (i = 0; i < nents; i++, sg++) {
+		char *virt = sg_virt(sg);
+		if (!arch_is_coherent())
+			dma_cache_maint(virt, sg->length, dir);
+	}
+}
+#else
+extern void dma_sync_sg_for_cpu(struct device*, struct scatterlist*, int, enum dma_data_direction);
+extern void dma_sync_sg_for_device(struct device*, struct scatterlist*, int, enum dma_data_direction);
+#endif
+
+#ifdef CONFIG_DMABOUNCE
+/*
+ * For SA-1111, IXP425, and ADI systems  the dma-mapping functions are "magic"
+ * and utilize bounce buffers as needed to work around limited DMA windows.
+ *
+ * On the SA-1111, a bug limits DMA to only certain regions of RAM.
+ * On the IXP425, the PCI inbound window is 64MB (256MB total RAM)
+ * On some ADI engineering systems, PCI inbound window is 32MB (12MB total RAM)
+ *
+ * The following are helper functions used by the dmabounce subystem
+ *
+ */
+
+/**
+ * dmabounce_register_dev
+ *
+ * @dev: valid struct device pointer
+ * @small_buf_size: size of buffers to use with small buffer pool
+ * @large_buf_size: size of buffers to use with large buffer pool (can be 0)
+ *
+ * This function should be called by low-level platform code to register
+ * a device as requireing DMA buffer bouncing. The function will allocate
+ * appropriate DMA pools for the device.
+ *
+ */
+extern int dmabounce_register_dev(struct device *, unsigned long, unsigned long);
+
+/**
+ * dmabounce_unregister_dev
+ *
+ * @dev: valid struct device pointer
+ *
+ * This function should be called by low-level platform code when device
+ * that was previously registered with dmabounce_register_dev is removed
+ * from the system.
+ *
+ */
+extern void dmabounce_unregister_dev(struct device *);
+
+/**
+ * dma_needs_bounce
+ *
+ * @dev: valid struct device pointer
+ * @dma_handle: dma_handle of unbounced buffer
+ * @size: size of region being mapped
+ *
+ * Platforms that utilize the dmabounce mechanism must implement
+ * this function.
+ *
+ * The dmabounce routines call this function whenever a dma-mapping
+ * is requested to determine whether a given buffer needs to be bounced
+ * or not. The function must return 0 if the buffer is OK for
+ * DMA access and 1 if the buffer needs to be bounced.
+ *
+ */
+extern int dma_needs_bounce(struct device*, dma_addr_t, size_t);
+#endif /* CONFIG_DMABOUNCE */
+
+#endif /* __KERNEL__ */
+#endif
diff --git a/arch/arm/include/asm/dma.h b/arch/arm/include/asm/dma.h
new file mode 100644
index 000000000000..75154b193117
--- /dev/null
+++ b/arch/arm/include/asm/dma.h
@@ -0,0 +1,143 @@
+#ifndef __ASM_ARM_DMA_H
+#define __ASM_ARM_DMA_H
+
+typedef unsigned int dmach_t;
+
+#include <linux/spinlock.h>
+#include <asm/system.h>
+#include <asm/scatterlist.h>
+#include <mach/dma.h>
+
+/*
+ * This is the maximum virtual address which can be DMA'd from.
+ */
+#ifndef MAX_DMA_ADDRESS
+#define MAX_DMA_ADDRESS	0xffffffff
+#endif
+
+/*
+ * DMA modes
+ */
+typedef unsigned int dmamode_t;
+
+#define DMA_MODE_MASK	3
+
+#define DMA_MODE_READ	 0
+#define DMA_MODE_WRITE	 1
+#define DMA_MODE_CASCADE 2
+#define DMA_AUTOINIT	 4
+
+extern spinlock_t  dma_spin_lock;
+
+static inline unsigned long claim_dma_lock(void)
+{
+	unsigned long flags;
+	spin_lock_irqsave(&dma_spin_lock, flags);
+	return flags;
+}
+
+static inline void release_dma_lock(unsigned long flags)
+{
+	spin_unlock_irqrestore(&dma_spin_lock, flags);
+}
+
+/* Clear the 'DMA Pointer Flip Flop'.
+ * Write 0 for LSB/MSB, 1 for MSB/LSB access.
+ */
+#define clear_dma_ff(channel)
+
+/* Set only the page register bits of the transfer address.
+ *
+ * NOTE: This is an architecture specific function, and should
+ *       be hidden from the drivers
+ */
+extern void set_dma_page(dmach_t channel, char pagenr);
+
+/* Request a DMA channel
+ *
+ * Some architectures may need to do allocate an interrupt
+ */
+extern int  request_dma(dmach_t channel, const char * device_id);
+
+/* Free a DMA channel
+ *
+ * Some architectures may need to do free an interrupt
+ */
+extern void free_dma(dmach_t channel);
+
+/* Enable DMA for this channel
+ *
+ * On some architectures, this may have other side effects like
+ * enabling an interrupt and setting the DMA registers.
+ */
+extern void enable_dma(dmach_t channel);
+
+/* Disable DMA for this channel
+ *
+ * On some architectures, this may have other side effects like
+ * disabling an interrupt or whatever.
+ */
+extern void disable_dma(dmach_t channel);
+
+/* Test whether the specified channel has an active DMA transfer
+ */
+extern int dma_channel_active(dmach_t channel);
+
+/* Set the DMA scatter gather list for this channel
+ *
+ * This should not be called if a DMA channel is enabled,
+ * especially since some DMA architectures don't update the
+ * DMA address immediately, but defer it to the enable_dma().
+ */
+extern void set_dma_sg(dmach_t channel, struct scatterlist *sg, int nr_sg);
+
+/* Set the DMA address for this channel
+ *
+ * This should not be called if a DMA channel is enabled,
+ * especially since some DMA architectures don't update the
+ * DMA address immediately, but defer it to the enable_dma().
+ */
+extern void __set_dma_addr(dmach_t channel, void *addr);
+#define set_dma_addr(channel, addr)				\
+	__set_dma_addr(channel, bus_to_virt(addr))
+
+/* Set the DMA byte count for this channel
+ *
+ * This should not be called if a DMA channel is enabled,
+ * especially since some DMA architectures don't update the
+ * DMA count immediately, but defer it to the enable_dma().
+ */
+extern void set_dma_count(dmach_t channel, unsigned long count);
+
+/* Set the transfer direction for this channel
+ *
+ * This should not be called if a DMA channel is enabled,
+ * especially since some DMA architectures don't update the
+ * DMA transfer direction immediately, but defer it to the
+ * enable_dma().
+ */
+extern void set_dma_mode(dmach_t channel, dmamode_t mode);
+
+/* Set the transfer speed for this channel
+ */
+extern void set_dma_speed(dmach_t channel, int cycle_ns);
+
+/* Get DMA residue count. After a DMA transfer, this
+ * should return zero. Reading this while a DMA transfer is
+ * still in progress will return unpredictable results.
+ * If called before the channel has been used, it may return 1.
+ * Otherwise, it returns the number of _bytes_ left to transfer.
+ */
+extern int  get_dma_residue(dmach_t channel);
+
+#ifndef NO_DMA
+#define NO_DMA	255
+#endif
+
+#ifdef CONFIG_PCI
+extern int isa_dma_bridge_buggy;
+#else
+#define isa_dma_bridge_buggy    (0)
+#endif
+
+#endif /* _ARM_DMA_H */
diff --git a/include/asm-arm/domain.h b/arch/arm/include/asm/domain.h
index 3c12a7625304..cc7ef4080711 100644
--- a/include/asm-arm/domain.h
+++ b/arch/arm/include/asm/domain.h
@@ -1,5 +1,5 @@
 /*
- *  linux/include/asm-arm/domain.h
+ *  arch/arm/include/asm/domain.h
  *
  *  Copyright (C) 1999 Russell King.
  *
diff --git a/include/asm-arm/ecard.h b/arch/arm/include/asm/ecard.h
index 5e22881a630d..29f2610efc70 100644
--- a/include/asm-arm/ecard.h
+++ b/arch/arm/include/asm/ecard.h
@@ -1,5 +1,5 @@
 /*
- * linux/include/asm-arm/ecard.h
+ * arch/arm/include/asm/ecard.h
  *
  * definitions for expansion cards
  *
diff --git a/include/asm-arm/elf.h b/arch/arm/include/asm/elf.h
index 4ca751627489..4ca751627489 100644
--- a/include/asm-arm/elf.h
+++ b/arch/arm/include/asm/elf.h
diff --git a/include/asm-arm/emergency-restart.h b/arch/arm/include/asm/emergency-restart.h
index 108d8c48e42e..108d8c48e42e 100644
--- a/include/asm-arm/emergency-restart.h
+++ b/arch/arm/include/asm/emergency-restart.h
diff --git a/include/asm-arm/errno.h b/arch/arm/include/asm/errno.h
index 6e60f0612bb6..6e60f0612bb6 100644
--- a/include/asm-arm/errno.h
+++ b/arch/arm/include/asm/errno.h
diff --git a/include/asm-arm/fb.h b/arch/arm/include/asm/fb.h
index d92e99cd8c8a..d92e99cd8c8a 100644
--- a/include/asm-arm/fb.h
+++ b/arch/arm/include/asm/fb.h
diff --git a/include/asm-arm/fcntl.h b/arch/arm/include/asm/fcntl.h
index a80b6607b2ef..a80b6607b2ef 100644
--- a/include/asm-arm/fcntl.h
+++ b/arch/arm/include/asm/fcntl.h
diff --git a/include/asm-arm/fiq.h b/arch/arm/include/asm/fiq.h
index a3bad09e825c..2242ce22ec6c 100644
--- a/include/asm-arm/fiq.h
+++ b/arch/arm/include/asm/fiq.h
@@ -1,5 +1,5 @@
 /*
- *  linux/include/asm-arm/fiq.h
+ *  arch/arm/include/asm/fiq.h
  *
  * Support for FIQ on ARM architectures.
  * Written by Philip Blundell <philb@gnu.org>, 1998
diff --git a/arch/arm/include/asm/flat.h b/arch/arm/include/asm/flat.h
new file mode 100644
index 000000000000..1d77e51907f6
--- /dev/null
+++ b/arch/arm/include/asm/flat.h
@@ -0,0 +1,19 @@
+/*
+ * arch/arm/include/asm/flat.h -- uClinux flat-format executables
+ */
+
+#ifndef __ARM_FLAT_H__
+#define __ARM_FLAT_H__
+
+/* An odd number of words will be pushed after this alignment, so
+   deliberately misalign the value.  */
+#define	flat_stack_align(sp)	sp = (void *)(((unsigned long)(sp) - 4) | 4)
+#define	flat_argvp_envp_on_stack()		1
+#define	flat_old_ram_flag(flags)		(flags)
+#define	flat_reloc_valid(reloc, size)		((reloc) <= (size))
+#define	flat_get_addr_from_rp(rp, relval, flags, persistent) get_unaligned(rp)
+#define	flat_put_addr_at_rp(rp, val, relval)	put_unaligned(val,rp)
+#define	flat_get_relocate_addr(rel)		(rel)
+#define	flat_set_persistent(relval, p)		0
+
+#endif /* __ARM_FLAT_H__ */
diff --git a/arch/arm/include/asm/floppy.h b/arch/arm/include/asm/floppy.h
new file mode 100644
index 000000000000..c9f03eccc9d8
--- /dev/null
+++ b/arch/arm/include/asm/floppy.h
@@ -0,0 +1,148 @@
+/*
+ *  arch/arm/include/asm/floppy.h
+ *
+ *  Copyright (C) 1996-2000 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ *  Note that we don't touch FLOPPY_DMA nor FLOPPY_IRQ here
+ */
+#ifndef __ASM_ARM_FLOPPY_H
+#define __ASM_ARM_FLOPPY_H
+#if 0
+#include <mach/floppy.h>
+#endif
+
+#define fd_outb(val,port)			\
+	do {					\
+		if ((port) == FD_DOR)		\
+			fd_setdor((val));	\
+		else				\
+			outb((val),(port));	\
+	} while(0)
+
+#define fd_inb(port)		inb((port))
+#define fd_request_irq()	request_irq(IRQ_FLOPPYDISK,floppy_interrupt,\
+					    IRQF_DISABLED,"floppy",NULL)
+#define fd_free_irq()		free_irq(IRQ_FLOPPYDISK,NULL)
+#define fd_disable_irq()	disable_irq(IRQ_FLOPPYDISK)
+#define fd_enable_irq()		enable_irq(IRQ_FLOPPYDISK)
+
+static inline int fd_dma_setup(void *data, unsigned int length,
+			       unsigned int mode, unsigned long addr)
+{
+	set_dma_mode(DMA_FLOPPY, mode);
+	__set_dma_addr(DMA_FLOPPY, data);
+	set_dma_count(DMA_FLOPPY, length);
+	virtual_dma_port = addr;
+	enable_dma(DMA_FLOPPY);
+	return 0;
+}
+#define fd_dma_setup		fd_dma_setup
+
+#define fd_request_dma()	request_dma(DMA_FLOPPY,"floppy")
+#define fd_free_dma()		free_dma(DMA_FLOPPY)
+#define fd_disable_dma()	disable_dma(DMA_FLOPPY)
+
+/* need to clean up dma.h */
+#define DMA_FLOPPYDISK		DMA_FLOPPY
+
+/* Floppy_selects is the list of DOR's to select drive fd
+ *
+ * On initialisation, the floppy list is scanned, and the drives allocated
+ * in the order that they are found.  This is done by seeking the drive
+ * to a non-zero track, and then restoring it to track 0.  If an error occurs,
+ * then there is no floppy drive present.       [to be put back in again]
+ */
+static unsigned char floppy_selects[2][4] =
+{
+	{ 0x10, 0x21, 0x23, 0x33 },
+	{ 0x10, 0x21, 0x23, 0x33 }
+};
+
+#define fd_setdor(dor)								\
+do {										\
+	int new_dor = (dor);							\
+	if (new_dor & 0xf0)							\
+		new_dor = (new_dor & 0x0c) | floppy_selects[fdc][new_dor & 3];	\
+	else									\
+		new_dor &= 0x0c;						\
+	outb(new_dor, FD_DOR);							\
+} while (0)
+
+/*
+ * Someday, we'll automatically detect which drives are present...
+ */
+static inline void fd_scandrives (void)
+{
+#if 0
+	int floppy, drive_count;
+
+	fd_disable_irq();
+	raw_cmd = &default_raw_cmd;
+	raw_cmd->flags = FD_RAW_SPIN | FD_RAW_NEED_SEEK;
+	raw_cmd->track = 0;
+	raw_cmd->rate = ?;
+	drive_count = 0;
+	for (floppy = 0; floppy < 4; floppy ++) {
+		current_drive = drive_count;
+		/*
+		 * Turn on floppy motor
+		 */
+		if (start_motor(redo_fd_request))
+			continue;
+		/*
+		 * Set up FDC
+		 */
+		fdc_specify();
+		/*
+		 * Tell FDC to recalibrate
+		 */
+		output_byte(FD_RECALIBRATE);
+		LAST_OUT(UNIT(floppy));
+		/* wait for command to complete */
+		if (!successful) {
+			int i;
+			for (i = drive_count; i < 3; i--)
+				floppy_selects[fdc][i] = floppy_selects[fdc][i + 1];
+			floppy_selects[fdc][3] = 0;
+			floppy -= 1;
+		} else
+			drive_count++;
+	}
+#else
+	floppy_selects[0][0] = 0x10;
+	floppy_selects[0][1] = 0x21;
+	floppy_selects[0][2] = 0x23;
+	floppy_selects[0][3] = 0x33;
+#endif
+}
+
+#define FDC1 (0x3f0)
+
+#define FLOPPY0_TYPE 4
+#define FLOPPY1_TYPE 4
+
+#define N_FDC 1
+#define N_DRIVE 4
+
+#define CROSS_64KB(a,s) (0)
+
+/*
+ * This allows people to reverse the order of
+ * fd0 and fd1, in case their hardware is
+ * strangely connected (as some RiscPCs
+ * and A5000s seem to be).
+ */
+static void driveswap(int *ints, int dummy, int dummy2)
+{
+	floppy_selects[0][0] ^= floppy_selects[0][1];
+	floppy_selects[0][1] ^= floppy_selects[0][0];
+	floppy_selects[0][0] ^= floppy_selects[0][1];
+}
+
+#define EXTRA_FLOPPY_PARAMS ,{ "driveswap", &driveswap, NULL, 0, 0 }
+	
+#endif
diff --git a/include/asm-arm/fpstate.h b/arch/arm/include/asm/fpstate.h
index 392eb5332323..ee5e03efc1bb 100644
--- a/include/asm-arm/fpstate.h
+++ b/arch/arm/include/asm/fpstate.h
@@ -1,5 +1,5 @@
 /*
- *  linux/include/asm-arm/fpstate.h
+ *  arch/arm/include/asm/fpstate.h
  *
  *  Copyright (C) 1995 Russell King
  *
diff --git a/include/asm-arm/ftrace.h b/arch/arm/include/asm/ftrace.h
index 584ef9a8e5a5..584ef9a8e5a5 100644
--- a/include/asm-arm/ftrace.h
+++ b/arch/arm/include/asm/ftrace.h
diff --git a/include/asm-arm/futex.h b/arch/arm/include/asm/futex.h
index 6a332a9f099c..6a332a9f099c 100644
--- a/include/asm-arm/futex.h
+++ b/arch/arm/include/asm/futex.h
diff --git a/include/asm-arm/glue.h b/arch/arm/include/asm/glue.h
index a97a182ba287..a0e39d5d00c9 100644
--- a/include/asm-arm/glue.h
+++ b/arch/arm/include/asm/glue.h
@@ -1,5 +1,5 @@
 /*
- *  linux/include/asm-arm/glue.h
+ *  arch/arm/include/asm/glue.h
  *
  *  Copyright (C) 1997-1999 Russell King
  *  Copyright (C) 2000-2002 Deep Blue Solutions Ltd.
diff --git a/arch/arm/include/asm/gpio.h b/arch/arm/include/asm/gpio.h
new file mode 100644
index 000000000000..166a7a3e2840
--- /dev/null
+++ b/arch/arm/include/asm/gpio.h
@@ -0,0 +1,7 @@
+#ifndef _ARCH_ARM_GPIO_H
+#define _ARCH_ARM_GPIO_H
+
+/* not all ARM platforms necessarily support this API ... */
+#include <mach/gpio.h>
+
+#endif /* _ARCH_ARM_GPIO_H */
diff --git a/include/asm-arm/hardirq.h b/arch/arm/include/asm/hardirq.h
index 182310b99195..182310b99195 100644
--- a/include/asm-arm/hardirq.h
+++ b/arch/arm/include/asm/hardirq.h
diff --git a/include/asm-arm/hardware/arm_timer.h b/arch/arm/include/asm/hardware/arm_timer.h
index 04be3bdf46b8..04be3bdf46b8 100644
--- a/include/asm-arm/hardware/arm_timer.h
+++ b/arch/arm/include/asm/hardware/arm_timer.h
diff --git a/include/asm-arm/hardware/arm_twd.h b/arch/arm/include/asm/hardware/arm_twd.h
index e521b70713c8..e521b70713c8 100644
--- a/include/asm-arm/hardware/arm_twd.h
+++ b/arch/arm/include/asm/hardware/arm_twd.h
diff --git a/include/asm-arm/hardware/cache-l2x0.h b/arch/arm/include/asm/hardware/cache-l2x0.h
index 54029a740396..64f2252a25cd 100644
--- a/include/asm-arm/hardware/cache-l2x0.h
+++ b/arch/arm/include/asm/hardware/cache-l2x0.h
@@ -1,5 +1,5 @@
 /*
- * include/asm-arm/hardware/cache-l2x0.h
+ * arch/arm/include/asm/hardware/cache-l2x0.h
  *
  * Copyright (C) 2007 ARM Limited
  *
diff --git a/include/asm-arm/hardware/clps7111.h b/arch/arm/include/asm/hardware/clps7111.h
index 8d3228dc1778..44477225aed6 100644
--- a/include/asm-arm/hardware/clps7111.h
+++ b/arch/arm/include/asm/hardware/clps7111.h
@@ -1,5 +1,5 @@
 /*
- *  linux/include/asm-arm/hardware/clps7111.h
+ *  arch/arm/include/asm/hardware/clps7111.h
  *
  *  This file contains the hardware definitions of the CLPS7111 internal
  *  registers.
diff --git a/include/asm-arm/hardware/cs89712.h b/arch/arm/include/asm/hardware/cs89712.h
index ad99a3e1b802..f75626933e94 100644
--- a/include/asm-arm/hardware/cs89712.h
+++ b/arch/arm/include/asm/hardware/cs89712.h
@@ -1,5 +1,5 @@
 /*
- *  linux/include/asm-arm/hardware/cs89712.h
+ *  arch/arm/include/asm/hardware/cs89712.h
  *
  *  This file contains the hardware definitions of the CS89712
  *  additional internal registers.
diff --git a/include/asm-arm/hardware/debug-8250.S b/arch/arm/include/asm/hardware/debug-8250.S
index 07c97fb233fc..22c689255e6e 100644
--- a/include/asm-arm/hardware/debug-8250.S
+++ b/arch/arm/include/asm/hardware/debug-8250.S
@@ -1,5 +1,5 @@
 /*
- * linux/include/asm-arm/hardware/debug-8250.S
+ * arch/arm/include/asm/hardware/debug-8250.S
  *
  *  Copyright (C) 1994-1999 Russell King
  *
diff --git a/include/asm-arm/hardware/debug-pl01x.S b/arch/arm/include/asm/hardware/debug-pl01x.S
index 23c541a9e89a..f9fd083eff63 100644
--- a/include/asm-arm/hardware/debug-pl01x.S
+++ b/arch/arm/include/asm/hardware/debug-pl01x.S
@@ -1,4 +1,4 @@
-/* linux/include/asm-arm/hardware/debug-pl01x.S
+/* arch/arm/include/asm/hardware/debug-pl01x.S
  *
  * Debugging macro include header
  *
diff --git a/include/asm-arm/hardware/dec21285.h b/arch/arm/include/asm/hardware/dec21285.h
index 546f7077be9c..0d7552751aaf 100644
--- a/include/asm-arm/hardware/dec21285.h
+++ b/arch/arm/include/asm/hardware/dec21285.h
@@ -1,5 +1,5 @@
 /*
- *  linux/include/asm-arm/hardware/dec21285.h
+ *  arch/arm/include/asm/hardware/dec21285.h
  *
  *  Copyright (C) 1998 Russell King
  *
@@ -19,7 +19,7 @@
 #define DC21285_PCI_MEM			0x80000000
 
 #ifndef __ASSEMBLY__
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #define DC21285_IO(x)		((volatile unsigned long *)(ARMCSR_BASE+(x)))
 #else
 #define DC21285_IO(x)		(x)
diff --git a/include/asm-arm/hardware/entry-macro-iomd.S b/arch/arm/include/asm/hardware/entry-macro-iomd.S
index 9bb580a5b15e..e0af4983723f 100644
--- a/include/asm-arm/hardware/entry-macro-iomd.S
+++ b/arch/arm/include/asm/hardware/entry-macro-iomd.S
@@ -1,5 +1,5 @@
 /*
- * include/asm-arm/hardware/entry-macro-iomd.S
+ * arch/arm/include/asm/hardware/entry-macro-iomd.S
  *
  * Low-level IRQ helper macros for IOC/IOMD based platforms
  *
diff --git a/include/asm-arm/hardware/ep7211.h b/arch/arm/include/asm/hardware/ep7211.h
index 017aa68f612d..654d5f625c49 100644
--- a/include/asm-arm/hardware/ep7211.h
+++ b/arch/arm/include/asm/hardware/ep7211.h
@@ -1,5 +1,5 @@
 /*
- *  linux/include/asm-arm/hardware/ep7211.h
+ *  arch/arm/include/asm/hardware/ep7211.h
  *
  *  This file contains the hardware definitions of the EP7211 internal
  *  registers.
diff --git a/include/asm-arm/hardware/ep7212.h b/arch/arm/include/asm/hardware/ep7212.h
index 0e952e747073..3b43bbeaf1db 100644
--- a/include/asm-arm/hardware/ep7212.h
+++ b/arch/arm/include/asm/hardware/ep7212.h
@@ -1,5 +1,5 @@
 /*
- *  linux/include/asm-arm/hardware/ep7212.h
+ *  arch/arm/include/asm/hardware/ep7212.h
  *
  *  This file contains the hardware definitions of the EP7212 internal
  *  registers.
diff --git a/include/asm-arm/hardware/gic.h b/arch/arm/include/asm/hardware/gic.h
index 966e428ad32c..4924914af188 100644
--- a/include/asm-arm/hardware/gic.h
+++ b/arch/arm/include/asm/hardware/gic.h
@@ -1,5 +1,5 @@
 /*
- *  linux/include/asm-arm/hardware/gic.h
+ *  arch/arm/include/asm/hardware/gic.h
  *
  *  Copyright (C) 2002 ARM Limited, All Rights Reserved.
  *
diff --git a/include/asm-arm/hardware/icst307.h b/arch/arm/include/asm/hardware/icst307.h
index ff8618a441c0..554f128a1046 100644
--- a/include/asm-arm/hardware/icst307.h
+++ b/arch/arm/include/asm/hardware/icst307.h
@@ -1,5 +1,5 @@
 /*
- *  linux/include/asm-arm/hardware/icst307.h
+ *  arch/arm/include/asm/hardware/icst307.h
  *
  *  Copyright (C) 2003 Deep Blue Solutions, Ltd, All Rights Reserved.
  *
diff --git a/include/asm-arm/hardware/icst525.h b/arch/arm/include/asm/hardware/icst525.h
index edd5a5704406..58f0dc43e2ed 100644
--- a/include/asm-arm/hardware/icst525.h
+++ b/arch/arm/include/asm/hardware/icst525.h
@@ -1,5 +1,5 @@
 /*
- *  linux/include/asm-arm/hardware/icst525.h
+ *  arch/arm/include/asm/hardware/icst525.h
  *
  *  Copyright (C) 2003 Deep Blue Solutions, Ltd, All Rights Reserved.
  *
diff --git a/include/asm-arm/hardware/ioc.h b/arch/arm/include/asm/hardware/ioc.h
index b3b46ef65943..1f6b8013becb 100644
--- a/include/asm-arm/hardware/ioc.h
+++ b/arch/arm/include/asm/hardware/ioc.h
@@ -1,5 +1,5 @@
 /*
- *  linux/include/asm-arm/hardware/ioc.h
+ *  arch/arm/include/asm/hardware/ioc.h
  *
  *  Copyright (C) Russell King
  *
diff --git a/include/asm-arm/hardware/iomd.h b/arch/arm/include/asm/hardware/iomd.h
index 396e55ad06c6..9c5afbd71a69 100644
--- a/include/asm-arm/hardware/iomd.h
+++ b/arch/arm/include/asm/hardware/iomd.h
@@ -1,5 +1,5 @@
 /*
- *  linux/include/asm-arm/hardware/iomd.h
+ *  arch/arm/include/asm/hardware/iomd.h
  *
  *  Copyright (C) 1999 Russell King
  *
diff --git a/include/asm-arm/hardware/iop3xx-adma.h b/arch/arm/include/asm/hardware/iop3xx-adma.h
index af64676650a2..87bff09633aa 100644
--- a/include/asm-arm/hardware/iop3xx-adma.h
+++ b/arch/arm/include/asm/hardware/iop3xx-adma.h
@@ -19,7 +19,7 @@
 #define _ADMA_H
 #include <linux/types.h>
 #include <linux/io.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/hardware/iop_adma.h>
 
 /* Memory copy units */
diff --git a/include/asm-arm/hardware/iop3xx-gpio.h b/arch/arm/include/asm/hardware/iop3xx-gpio.h
index 0c9331f9ac24..b69d972b1f7d 100644
--- a/include/asm-arm/hardware/iop3xx-gpio.h
+++ b/arch/arm/include/asm/hardware/iop3xx-gpio.h
@@ -1,5 +1,5 @@
 /*
- * linux/include/asm-arm/hardware/iop3xx-gpio.h
+ * arch/arm/include/asm/hardware/iop3xx-gpio.h
  *
  * IOP3xx GPIO wrappers
  *
@@ -25,7 +25,7 @@
 #ifndef __ASM_ARM_HARDWARE_IOP3XX_GPIO_H
 #define __ASM_ARM_HARDWARE_IOP3XX_GPIO_H
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm-generic/gpio.h>
 
 #define IOP3XX_N_GPIOS	8
diff --git a/include/asm-arm/hardware/iop3xx.h b/arch/arm/include/asm/hardware/iop3xx.h
index 18f6937f5010..4b8e7f559929 100644
--- a/include/asm-arm/hardware/iop3xx.h
+++ b/arch/arm/include/asm/hardware/iop3xx.h
@@ -1,5 +1,5 @@
 /*
- * include/asm-arm/hardware/iop3xx.h
+ * arch/arm/include/asm/hardware/iop3xx.h
  *
  * Intel IOP32X and IOP33X register definitions
  *
diff --git a/include/asm-arm/hardware/iop_adma.h b/arch/arm/include/asm/hardware/iop_adma.h
index cb7e3611bcba..cb7e3611bcba 100644
--- a/include/asm-arm/hardware/iop_adma.h
+++ b/arch/arm/include/asm/hardware/iop_adma.h
diff --git a/include/asm-arm/hardware/it8152.h b/arch/arm/include/asm/hardware/it8152.h
index 74b5fff7f575..74b5fff7f575 100644
--- a/include/asm-arm/hardware/it8152.h
+++ b/arch/arm/include/asm/hardware/it8152.h
diff --git a/include/asm-arm/hardware/linkup-l1110.h b/arch/arm/include/asm/hardware/linkup-l1110.h
index 7ec91168a576..7ec91168a576 100644
--- a/include/asm-arm/hardware/linkup-l1110.h
+++ b/arch/arm/include/asm/hardware/linkup-l1110.h
diff --git a/include/asm-arm/hardware/locomo.h b/arch/arm/include/asm/hardware/locomo.h
index fb0645de6f31..954b1be991b4 100644
--- a/include/asm-arm/hardware/locomo.h
+++ b/arch/arm/include/asm/hardware/locomo.h
@@ -1,5 +1,5 @@
 /*
- * linux/include/asm-arm/hardware/locomo.h
+ * arch/arm/include/asm/hardware/locomo.h
  *
  * This file contains the definitions for the LoCoMo G/A Chip
  *
diff --git a/include/asm-arm/hardware/memc.h b/arch/arm/include/asm/hardware/memc.h
index 8aef5aa0e01b..42ba7c167d1f 100644
--- a/include/asm-arm/hardware/memc.h
+++ b/arch/arm/include/asm/hardware/memc.h
@@ -1,5 +1,5 @@
 /*
- *  linux/include/asm-arm/hardware/memc.h
+ *  arch/arm/include/asm/hardware/memc.h
  *
  *  Copyright (C) Russell King.
  *
diff --git a/include/asm-arm/hardware/pci_v3.h b/arch/arm/include/asm/hardware/pci_v3.h
index 4d497bdb9a97..2811c7e2cfdf 100644
--- a/include/asm-arm/hardware/pci_v3.h
+++ b/arch/arm/include/asm/hardware/pci_v3.h
@@ -1,5 +1,5 @@
 /*
- *  linux/include/asm-arm/hardware/pci_v3.h
+ *  arch/arm/include/asm/hardware/pci_v3.h
  *
  *  Internal header file PCI V3 chip
  *
diff --git a/include/asm-arm/hardware/sa1111.h b/arch/arm/include/asm/hardware/sa1111.h
index 61b1d05c7df7..5da2595759e5 100644
--- a/include/asm-arm/hardware/sa1111.h
+++ b/arch/arm/include/asm/hardware/sa1111.h
@@ -1,5 +1,5 @@
 /*
- * linux/include/asm-arm/hardware/sa1111.h
+ * arch/arm/include/asm/hardware/sa1111.h
  *
  * Copyright (C) 2000 John G Dorsey <john+@cs.cmu.edu>
  *
@@ -12,7 +12,7 @@
 #ifndef _ASM_ARCH_SA1111
 #define _ASM_ARCH_SA1111
 
-#include <asm/arch/bitfield.h>
+#include <mach/bitfield.h>
 
 /*
  * The SA1111 is always located at virtual 0xf4000000, and is always
diff --git a/include/asm-arm/hardware/scoop.h b/arch/arm/include/asm/hardware/scoop.h
index dfb8330599f9..dfb8330599f9 100644
--- a/include/asm-arm/hardware/scoop.h
+++ b/arch/arm/include/asm/hardware/scoop.h
diff --git a/include/asm-arm/hardware/sharpsl_pm.h b/arch/arm/include/asm/hardware/sharpsl_pm.h
index 2d00db22b981..2d00db22b981 100644
--- a/include/asm-arm/hardware/sharpsl_pm.h
+++ b/arch/arm/include/asm/hardware/sharpsl_pm.h
diff --git a/include/asm-arm/hardware/ssp.h b/arch/arm/include/asm/hardware/ssp.h
index 3b42e181997c..3b42e181997c 100644
--- a/include/asm-arm/hardware/ssp.h
+++ b/arch/arm/include/asm/hardware/ssp.h
diff --git a/include/asm-arm/hardware/uengine.h b/arch/arm/include/asm/hardware/uengine.h
index b442d65c6593..b442d65c6593 100644
--- a/include/asm-arm/hardware/uengine.h
+++ b/arch/arm/include/asm/hardware/uengine.h
diff --git a/include/asm-arm/hardware/vic.h b/arch/arm/include/asm/hardware/vic.h
index ed9ca3736a0b..263f2c362a30 100644
--- a/include/asm-arm/hardware/vic.h
+++ b/arch/arm/include/asm/hardware/vic.h
@@ -1,5 +1,5 @@
 /*
- *  linux/include/asm-arm/hardware/vic.h
+ *  arch/arm/include/asm/hardware/vic.h
  *
  *  Copyright (c) ARM Limited 2003.  All rights reserved.
  *
diff --git a/arch/arm/include/asm/hw_irq.h b/arch/arm/include/asm/hw_irq.h
new file mode 100644
index 000000000000..90831f6f5f5c
--- /dev/null
+++ b/arch/arm/include/asm/hw_irq.h
@@ -0,0 +1,27 @@
+/*
+ * Nothing to see here yet
+ */
+#ifndef _ARCH_ARM_HW_IRQ_H
+#define _ARCH_ARM_HW_IRQ_H
+
+static inline void ack_bad_irq(int irq)
+{
+	extern unsigned long irq_err_count;
+	irq_err_count++;
+}
+
+/*
+ * Obsolete inline function for calling irq descriptor handlers.
+ */
+static inline void desc_handle_irq(unsigned int irq, struct irq_desc *desc)
+{
+	desc->handle_irq(irq, desc);
+}
+
+void set_irq_flags(unsigned int irq, unsigned int flags);
+
+#define IRQF_VALID	(1 << 0)
+#define IRQF_PROBE	(1 << 1)
+#define IRQF_NOAUTOEN	(1 << 2)
+
+#endif
diff --git a/include/asm-arm/hwcap.h b/arch/arm/include/asm/hwcap.h
index 81f4c899a555..81f4c899a555 100644
--- a/include/asm-arm/hwcap.h
+++ b/arch/arm/include/asm/hwcap.h
diff --git a/arch/arm/include/asm/ide.h b/arch/arm/include/asm/ide.h
new file mode 100644
index 000000000000..b507ce8e5019
--- /dev/null
+++ b/arch/arm/include/asm/ide.h
@@ -0,0 +1,23 @@
+/*
+ *  arch/arm/include/asm/ide.h
+ *
+ *  Copyright (C) 1994-1996  Linus Torvalds & authors
+ */
+
+/*
+ *  This file contains the ARM architecture specific IDE code.
+ */
+
+#ifndef __ASMARM_IDE_H
+#define __ASMARM_IDE_H
+
+#ifdef __KERNEL__
+
+#define __ide_mm_insw(port,addr,len)	readsw(port,addr,len)
+#define __ide_mm_insl(port,addr,len)	readsl(port,addr,len)
+#define __ide_mm_outsw(port,addr,len)	writesw(port,addr,len)
+#define __ide_mm_outsl(port,addr,len)	writesl(port,addr,len)
+
+#endif /* __KERNEL__ */
+
+#endif /* __ASMARM_IDE_H */
diff --git a/arch/arm/include/asm/io.h b/arch/arm/include/asm/io.h
new file mode 100644
index 000000000000..94a95d7fafd6
--- /dev/null
+++ b/arch/arm/include/asm/io.h
@@ -0,0 +1,287 @@
+/*
+ *  arch/arm/include/asm/io.h
+ *
+ *  Copyright (C) 1996-2000 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Modifications:
+ *  16-Sep-1996	RMK	Inlined the inx/outx functions & optimised for both
+ *			constant addresses and variable addresses.
+ *  04-Dec-1997	RMK	Moved a lot of this stuff to the new architecture
+ *			specific IO header files.
+ *  27-Mar-1999	PJB	Second parameter of memcpy_toio is const..
+ *  04-Apr-1999	PJB	Added check_signature.
+ *  12-Dec-1999	RMK	More cleanups
+ *  18-Jun-2000 RMK	Removed virt_to_* and friends definitions
+ *  05-Oct-2004 BJD     Moved memory string functions to use void __iomem
+ */
+#ifndef __ASM_ARM_IO_H
+#define __ASM_ARM_IO_H
+
+#ifdef __KERNEL__
+
+#include <linux/types.h>
+#include <asm/byteorder.h>
+#include <asm/memory.h>
+
+/*
+ * ISA I/O bus memory addresses are 1:1 with the physical address.
+ */
+#define isa_virt_to_bus virt_to_phys
+#define isa_page_to_bus page_to_phys
+#define isa_bus_to_virt phys_to_virt
+
+/*
+ * Generic IO read/write.  These perform native-endian accesses.  Note
+ * that some architectures will want to re-define __raw_{read,write}w.
+ */
+extern void __raw_writesb(void __iomem *addr, const void *data, int bytelen);
+extern void __raw_writesw(void __iomem *addr, const void *data, int wordlen);
+extern void __raw_writesl(void __iomem *addr, const void *data, int longlen);
+
+extern void __raw_readsb(const void __iomem *addr, void *data, int bytelen);
+extern void __raw_readsw(const void __iomem *addr, void *data, int wordlen);
+extern void __raw_readsl(const void __iomem *addr, void *data, int longlen);
+
+#define __raw_writeb(v,a)	(__chk_io_ptr(a), *(volatile unsigned char __force  *)(a) = (v))
+#define __raw_writew(v,a)	(__chk_io_ptr(a), *(volatile unsigned short __force *)(a) = (v))
+#define __raw_writel(v,a)	(__chk_io_ptr(a), *(volatile unsigned int __force   *)(a) = (v))
+
+#define __raw_readb(a)		(__chk_io_ptr(a), *(volatile unsigned char __force  *)(a))
+#define __raw_readw(a)		(__chk_io_ptr(a), *(volatile unsigned short __force *)(a))
+#define __raw_readl(a)		(__chk_io_ptr(a), *(volatile unsigned int __force   *)(a))
+
+/*
+ * Architecture ioremap implementation.
+ */
+#define MT_DEVICE		0
+#define MT_DEVICE_NONSHARED	1
+#define MT_DEVICE_CACHED	2
+#define MT_DEVICE_IXP2000	3
+/*
+ * types 4 onwards can be found in asm/mach/map.h and are undefined
+ * for ioremap
+ */
+
+/*
+ * __arm_ioremap takes CPU physical address.
+ * __arm_ioremap_pfn takes a Page Frame Number and an offset into that page
+ */
+extern void __iomem * __arm_ioremap_pfn(unsigned long, unsigned long, size_t, unsigned int);
+extern void __iomem * __arm_ioremap(unsigned long, size_t, unsigned int);
+extern void __iounmap(volatile void __iomem *addr);
+
+/*
+ * Bad read/write accesses...
+ */
+extern void __readwrite_bug(const char *fn);
+
+/*
+ * Now, pick up the machine-defined IO definitions
+ */
+#include <mach/io.h>
+
+/*
+ *  IO port access primitives
+ *  -------------------------
+ *
+ * The ARM doesn't have special IO access instructions; all IO is memory
+ * mapped.  Note that these are defined to perform little endian accesses
+ * only.  Their primary purpose is to access PCI and ISA peripherals.
+ *
+ * Note that for a big endian machine, this implies that the following
+ * big endian mode connectivity is in place, as described by numerous
+ * ARM documents:
+ *
+ *    PCI:  D0-D7   D8-D15 D16-D23 D24-D31
+ *    ARM: D24-D31 D16-D23  D8-D15  D0-D7
+ *
+ * The machine specific io.h include defines __io to translate an "IO"
+ * address to a memory address.
+ *
+ * Note that we prevent GCC re-ordering or caching values in expressions
+ * by introducing sequence points into the in*() definitions.  Note that
+ * __raw_* do not guarantee this behaviour.
+ *
+ * The {in,out}[bwl] macros are for emulating x86-style PCI/ISA IO space.
+ */
+#ifdef __io
+#define outb(v,p)		__raw_writeb(v,__io(p))
+#define outw(v,p)		__raw_writew((__force __u16) \
+					cpu_to_le16(v),__io(p))
+#define outl(v,p)		__raw_writel((__force __u32) \
+					cpu_to_le32(v),__io(p))
+
+#define inb(p)	({ __u8 __v = __raw_readb(__io(p)); __v; })
+#define inw(p)	({ __u16 __v = le16_to_cpu((__force __le16) \
+			__raw_readw(__io(p))); __v; })
+#define inl(p)	({ __u32 __v = le32_to_cpu((__force __le32) \
+			__raw_readl(__io(p))); __v; })
+
+#define outsb(p,d,l)		__raw_writesb(__io(p),d,l)
+#define outsw(p,d,l)		__raw_writesw(__io(p),d,l)
+#define outsl(p,d,l)		__raw_writesl(__io(p),d,l)
+
+#define insb(p,d,l)		__raw_readsb(__io(p),d,l)
+#define insw(p,d,l)		__raw_readsw(__io(p),d,l)
+#define insl(p,d,l)		__raw_readsl(__io(p),d,l)
+#endif
+
+#define outb_p(val,port)	outb((val),(port))
+#define outw_p(val,port)	outw((val),(port))
+#define outl_p(val,port)	outl((val),(port))
+#define inb_p(port)		inb((port))
+#define inw_p(port)		inw((port))
+#define inl_p(port)		inl((port))
+
+#define outsb_p(port,from,len)	outsb(port,from,len)
+#define outsw_p(port,from,len)	outsw(port,from,len)
+#define outsl_p(port,from,len)	outsl(port,from,len)
+#define insb_p(port,to,len)	insb(port,to,len)
+#define insw_p(port,to,len)	insw(port,to,len)
+#define insl_p(port,to,len)	insl(port,to,len)
+
+/*
+ * String version of IO memory access ops:
+ */
+extern void _memcpy_fromio(void *, const volatile void __iomem *, size_t);
+extern void _memcpy_toio(volatile void __iomem *, const void *, size_t);
+extern void _memset_io(volatile void __iomem *, int, size_t);
+
+#define mmiowb()
+
+/*
+ *  Memory access primitives
+ *  ------------------------
+ *
+ * These perform PCI memory accesses via an ioremap region.  They don't
+ * take an address as such, but a cookie.
+ *
+ * Again, this are defined to perform little endian accesses.  See the
+ * IO port primitives for more information.
+ */
+#ifdef __mem_pci
+#define readb(c) ({ __u8  __v = __raw_readb(__mem_pci(c)); __v; })
+#define readw(c) ({ __u16 __v = le16_to_cpu((__force __le16) \
+					__raw_readw(__mem_pci(c))); __v; })
+#define readl(c) ({ __u32 __v = le32_to_cpu((__force __le32) \
+					__raw_readl(__mem_pci(c))); __v; })
+#define readb_relaxed(addr) readb(addr)
+#define readw_relaxed(addr) readw(addr)
+#define readl_relaxed(addr) readl(addr)
+
+#define readsb(p,d,l)		__raw_readsb(__mem_pci(p),d,l)
+#define readsw(p,d,l)		__raw_readsw(__mem_pci(p),d,l)
+#define readsl(p,d,l)		__raw_readsl(__mem_pci(p),d,l)
+
+#define writeb(v,c)		__raw_writeb(v,__mem_pci(c))
+#define writew(v,c)		__raw_writew((__force __u16) \
+					cpu_to_le16(v),__mem_pci(c))
+#define writel(v,c)		__raw_writel((__force __u32) \
+					cpu_to_le32(v),__mem_pci(c))
+
+#define writesb(p,d,l)		__raw_writesb(__mem_pci(p),d,l)
+#define writesw(p,d,l)		__raw_writesw(__mem_pci(p),d,l)
+#define writesl(p,d,l)		__raw_writesl(__mem_pci(p),d,l)
+
+#define memset_io(c,v,l)	_memset_io(__mem_pci(c),(v),(l))
+#define memcpy_fromio(a,c,l)	_memcpy_fromio((a),__mem_pci(c),(l))
+#define memcpy_toio(c,a,l)	_memcpy_toio(__mem_pci(c),(a),(l))
+
+#elif !defined(readb)
+
+#define readb(c)			(__readwrite_bug("readb"),0)
+#define readw(c)			(__readwrite_bug("readw"),0)
+#define readl(c)			(__readwrite_bug("readl"),0)
+#define writeb(v,c)			__readwrite_bug("writeb")
+#define writew(v,c)			__readwrite_bug("writew")
+#define writel(v,c)			__readwrite_bug("writel")
+
+#define check_signature(io,sig,len)	(0)
+
+#endif	/* __mem_pci */
+
+/*
+ * ioremap and friends.
+ *
+ * ioremap takes a PCI memory address, as specified in
+ * Documentation/IO-mapping.txt.
+ *
+ */
+#ifndef __arch_ioremap
+#define ioremap(cookie,size)		__arm_ioremap(cookie, size, MT_DEVICE)
+#define ioremap_nocache(cookie,size)	__arm_ioremap(cookie, size, MT_DEVICE)
+#define ioremap_cached(cookie,size)	__arm_ioremap(cookie, size, MT_DEVICE_CACHED)
+#define iounmap(cookie)			__iounmap(cookie)
+#else
+#define ioremap(cookie,size)		__arch_ioremap((cookie), (size), MT_DEVICE)
+#define ioremap_nocache(cookie,size)	__arch_ioremap((cookie), (size), MT_DEVICE)
+#define ioremap_cached(cookie,size)	__arch_ioremap((cookie), (size), MT_DEVICE_CACHED)
+#define iounmap(cookie)			__arch_iounmap(cookie)
+#endif
+
+/*
+ * io{read,write}{8,16,32} macros
+ */
+#ifndef ioread8
+#define ioread8(p)	({ unsigned int __v = __raw_readb(p); __v; })
+#define ioread16(p)	({ unsigned int __v = le16_to_cpu((__force __le16)__raw_readw(p)); __v; })
+#define ioread32(p)	({ unsigned int __v = le32_to_cpu((__force __le32)__raw_readl(p)); __v; })
+
+#define iowrite8(v,p)	__raw_writeb(v, p)
+#define iowrite16(v,p)	__raw_writew((__force __u16)cpu_to_le16(v), p)
+#define iowrite32(v,p)	__raw_writel((__force __u32)cpu_to_le32(v), p)
+
+#define ioread8_rep(p,d,c)	__raw_readsb(p,d,c)
+#define ioread16_rep(p,d,c)	__raw_readsw(p,d,c)
+#define ioread32_rep(p,d,c)	__raw_readsl(p,d,c)
+
+#define iowrite8_rep(p,s,c)	__raw_writesb(p,s,c)
+#define iowrite16_rep(p,s,c)	__raw_writesw(p,s,c)
+#define iowrite32_rep(p,s,c)	__raw_writesl(p,s,c)
+
+extern void __iomem *ioport_map(unsigned long port, unsigned int nr);
+extern void ioport_unmap(void __iomem *addr);
+#endif
+
+struct pci_dev;
+
+extern void __iomem *pci_iomap(struct pci_dev *dev, int bar, unsigned long maxlen);
+extern void pci_iounmap(struct pci_dev *dev, void __iomem *addr);
+
+/*
+ * can the hardware map this into one segment or not, given no other
+ * constraints.
+ */
+#define BIOVEC_MERGEABLE(vec1, vec2)	\
+	((bvec_to_phys((vec1)) + (vec1)->bv_len) == bvec_to_phys((vec2)))
+
+#ifdef CONFIG_MMU
+#define ARCH_HAS_VALID_PHYS_ADDR_RANGE
+extern int valid_phys_addr_range(unsigned long addr, size_t size);
+extern int valid_mmap_phys_addr_range(unsigned long pfn, size_t size);
+#endif
+
+/*
+ * Convert a physical pointer to a virtual kernel pointer for /dev/mem
+ * access
+ */
+#define xlate_dev_mem_ptr(p)	__va(p)
+
+/*
+ * Convert a virtual cached pointer to an uncached pointer
+ */
+#define xlate_dev_kmem_ptr(p)	p
+
+/*
+ * Register ISA memory and port locations for glibc iopl/inb/outb
+ * emulation.
+ */
+extern void register_isa_ports(unsigned int mmio, unsigned int io,
+			       unsigned int io_shift);
+
+#endif	/* __KERNEL__ */
+#endif	/* __ASM_ARM_IO_H */
diff --git a/include/asm-arm/ioctl.h b/arch/arm/include/asm/ioctl.h
index b279fe06dfe5..b279fe06dfe5 100644
--- a/include/asm-arm/ioctl.h
+++ b/arch/arm/include/asm/ioctl.h
diff --git a/include/asm-arm/ioctls.h b/arch/arm/include/asm/ioctls.h
index a91d8a1523cf..a91d8a1523cf 100644
--- a/include/asm-arm/ioctls.h
+++ b/arch/arm/include/asm/ioctls.h
diff --git a/include/asm-arm/ipcbuf.h b/arch/arm/include/asm/ipcbuf.h
index 97683975f7df..97683975f7df 100644
--- a/include/asm-arm/ipcbuf.h
+++ b/arch/arm/include/asm/ipcbuf.h
diff --git a/arch/arm/include/asm/irq.h b/arch/arm/include/asm/irq.h
new file mode 100644
index 000000000000..d6786090d02c
--- /dev/null
+++ b/arch/arm/include/asm/irq.h
@@ -0,0 +1,28 @@
+#ifndef __ASM_ARM_IRQ_H
+#define __ASM_ARM_IRQ_H
+
+#include <mach/irqs.h>
+
+#ifndef irq_canonicalize
+#define irq_canonicalize(i)	(i)
+#endif
+
+#ifndef NR_IRQS
+#define NR_IRQS	128
+#endif
+
+/*
+ * Use this value to indicate lack of interrupt
+ * capability
+ */
+#ifndef NO_IRQ
+#define NO_IRQ	((unsigned int)(-1))
+#endif
+
+#ifndef __ASSEMBLY__
+struct irqaction;
+extern void migrate_irqs(void);
+#endif
+
+#endif
+
diff --git a/include/asm-arm/irq_regs.h b/arch/arm/include/asm/irq_regs.h
index 3dd9c0b70270..3dd9c0b70270 100644
--- a/include/asm-arm/irq_regs.h
+++ b/arch/arm/include/asm/irq_regs.h
diff --git a/include/asm-arm/irqflags.h b/arch/arm/include/asm/irqflags.h
index 6d09974e6646..6d09974e6646 100644
--- a/include/asm-arm/irqflags.h
+++ b/arch/arm/include/asm/irqflags.h
diff --git a/include/asm-arm/kdebug.h b/arch/arm/include/asm/kdebug.h
index 6ece1b037665..6ece1b037665 100644
--- a/include/asm-arm/kdebug.h
+++ b/arch/arm/include/asm/kdebug.h
diff --git a/arch/arm/include/asm/kexec.h b/arch/arm/include/asm/kexec.h
new file mode 100644
index 000000000000..df15a0dc228e
--- /dev/null
+++ b/arch/arm/include/asm/kexec.h
@@ -0,0 +1,31 @@
+#ifndef _ARM_KEXEC_H
+#define _ARM_KEXEC_H
+
+#ifdef CONFIG_KEXEC
+
+/* Maximum physical address we can use pages from */
+#define KEXEC_SOURCE_MEMORY_LIMIT (-1UL)
+/* Maximum address we can reach in physical address mode */
+#define KEXEC_DESTINATION_MEMORY_LIMIT (-1UL)
+/* Maximum address we can use for the control code buffer */
+#define KEXEC_CONTROL_MEMORY_LIMIT (-1UL)
+
+#define KEXEC_CONTROL_PAGE_SIZE	4096
+
+#define KEXEC_ARCH KEXEC_ARCH_ARM
+
+#define KEXEC_ARM_ATAGS_OFFSET  0x1000
+#define KEXEC_ARM_ZIMAGE_OFFSET 0x8000
+
+#ifndef __ASSEMBLY__
+
+struct kimage;
+/* Provide a dummy definition to avoid build failures. */
+static inline void crash_setup_regs(struct pt_regs *newregs,
+                                        struct pt_regs *oldregs) { }
+
+#endif /* __ASSEMBLY__ */
+
+#endif /* CONFIG_KEXEC */
+
+#endif /* _ARM_KEXEC_H */
diff --git a/include/asm-arm/kgdb.h b/arch/arm/include/asm/kgdb.h
index 67af4b841984..67af4b841984 100644
--- a/include/asm-arm/kgdb.h
+++ b/arch/arm/include/asm/kgdb.h
diff --git a/include/asm-arm/kmap_types.h b/arch/arm/include/asm/kmap_types.h
index 45def13ee17a..45def13ee17a 100644
--- a/include/asm-arm/kmap_types.h
+++ b/arch/arm/include/asm/kmap_types.h
diff --git a/arch/arm/include/asm/kprobes.h b/arch/arm/include/asm/kprobes.h
new file mode 100644
index 000000000000..a5d0d99ad387
--- /dev/null
+++ b/arch/arm/include/asm/kprobes.h
@@ -0,0 +1,79 @@
+/*
+ * arch/arm/include/asm/kprobes.h
+ *
+ * Copyright (C) 2006, 2007 Motorola Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ */
+
+#ifndef _ARM_KPROBES_H
+#define _ARM_KPROBES_H
+
+#include <linux/types.h>
+#include <linux/ptrace.h>
+#include <linux/percpu.h>
+
+#define __ARCH_WANT_KPROBES_INSN_SLOT
+#define MAX_INSN_SIZE			2
+#define MAX_STACK_SIZE			64	/* 32 would probably be OK */
+
+/*
+ * This undefined instruction must be unique and
+ * reserved solely for kprobes' use.
+ */
+#define KPROBE_BREAKPOINT_INSTRUCTION	0xe7f001f8
+
+#define regs_return_value(regs)		((regs)->ARM_r0)
+#define flush_insn_slot(p)		do { } while (0)
+#define kretprobe_blacklist_size	0
+
+typedef u32 kprobe_opcode_t;
+
+struct kprobe;
+typedef void (kprobe_insn_handler_t)(struct kprobe *, struct pt_regs *);
+
+/* Architecture specific copy of original instruction. */
+struct arch_specific_insn {
+	kprobe_opcode_t		*insn;
+	kprobe_insn_handler_t	*insn_handler;
+};
+
+struct prev_kprobe {
+	struct kprobe *kp;
+	unsigned int status;
+};
+
+/* per-cpu kprobe control block */
+struct kprobe_ctlblk {
+	unsigned int kprobe_status;
+	struct prev_kprobe prev_kprobe;
+	struct pt_regs jprobe_saved_regs;
+	char jprobes_stack[MAX_STACK_SIZE];
+};
+
+void arch_remove_kprobe(struct kprobe *);
+void kretprobe_trampoline(void);
+
+int kprobe_trap_handler(struct pt_regs *regs, unsigned int instr);
+int kprobe_fault_handler(struct pt_regs *regs, unsigned int fsr);
+int kprobe_exceptions_notify(struct notifier_block *self,
+			     unsigned long val, void *data);
+
+enum kprobe_insn {
+	INSN_REJECTED,
+	INSN_GOOD,
+	INSN_GOOD_NO_SLOT
+};
+
+enum kprobe_insn arm_kprobe_decode_insn(kprobe_opcode_t,
+					struct arch_specific_insn *);
+void __init arm_kprobe_decode_init(void);
+
+#endif /* _ARM_KPROBES_H */
diff --git a/include/asm-arm/leds.h b/arch/arm/include/asm/leds.h
index 12290ea55801..c545739f39b7 100644
--- a/include/asm-arm/leds.h
+++ b/arch/arm/include/asm/leds.h
@@ -1,5 +1,5 @@
 /*
- *  linux/include/asm-arm/leds.h
+ *  arch/arm/include/asm/leds.h
  *
  *  Copyright (C) 1998 Russell King
  *
diff --git a/include/asm-arm/limits.h b/arch/arm/include/asm/limits.h
index 08d8c6600804..08d8c6600804 100644
--- a/include/asm-arm/limits.h
+++ b/arch/arm/include/asm/limits.h
diff --git a/include/asm-arm/linkage.h b/arch/arm/include/asm/linkage.h
index 5a25632b1bc0..5a25632b1bc0 100644
--- a/include/asm-arm/linkage.h
+++ b/arch/arm/include/asm/linkage.h
diff --git a/include/asm-arm/local.h b/arch/arm/include/asm/local.h
index c11c530f74d0..c11c530f74d0 100644
--- a/include/asm-arm/local.h
+++ b/arch/arm/include/asm/local.h
diff --git a/include/asm-arm/locks.h b/arch/arm/include/asm/locks.h
index 852220eecdbc..ef4c897772d1 100644
--- a/include/asm-arm/locks.h
+++ b/arch/arm/include/asm/locks.h
@@ -1,5 +1,5 @@
 /*
- *  linux/include/asm-arm/locks.h
+ *  arch/arm/include/asm/locks.h
  *
  *  Copyright (C) 2000 Russell King
  *
diff --git a/include/asm-arm/mach/arch.h b/arch/arm/include/asm/mach/arch.h
index bcc8aed7c9a9..c59842dc7cb8 100644
--- a/include/asm-arm/mach/arch.h
+++ b/arch/arm/include/asm/mach/arch.h
@@ -1,5 +1,5 @@
 /*
- *  linux/include/asm-arm/mach/arch.h
+ *  arch/arm/include/asm/mach/arch.h
  *
  *  Copyright (C) 2000 Russell King
  *
diff --git a/arch/arm/include/asm/mach/dma.h b/arch/arm/include/asm/mach/dma.h
new file mode 100644
index 000000000000..fc7278ea7146
--- /dev/null
+++ b/arch/arm/include/asm/mach/dma.h
@@ -0,0 +1,57 @@
+/*
+ *  arch/arm/include/asm/mach/dma.h
+ *
+ *  Copyright (C) 1998-2000 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ *  This header file describes the interface between the generic DMA handler
+ *  (dma.c) and the architecture-specific DMA backends (dma-*.c)
+ */
+
+struct dma_struct;
+typedef struct dma_struct dma_t;
+
+struct dma_ops {
+	int	(*request)(dmach_t, dma_t *);		/* optional */
+	void	(*free)(dmach_t, dma_t *);		/* optional */
+	void	(*enable)(dmach_t, dma_t *);		/* mandatory */
+	void 	(*disable)(dmach_t, dma_t *);		/* mandatory */
+	int	(*residue)(dmach_t, dma_t *);		/* optional */
+	int	(*setspeed)(dmach_t, dma_t *, int);	/* optional */
+	char	*type;
+};
+
+struct dma_struct {
+	void		*addr;		/* single DMA address		*/
+	unsigned long	count;		/* single DMA size		*/
+	struct scatterlist buf;		/* single DMA			*/
+	int		sgcount;	/* number of DMA SG		*/
+	struct scatterlist *sg;		/* DMA Scatter-Gather List	*/
+
+	unsigned int	active:1;	/* Transfer active		*/
+	unsigned int	invalid:1;	/* Address/Count changed	*/
+
+	dmamode_t	dma_mode;	/* DMA mode			*/
+	int		speed;		/* DMA speed			*/
+
+	unsigned int	lock;		/* Device is allocated		*/
+	const char	*device_id;	/* Device name			*/
+
+	unsigned int	dma_base;	/* Controller base address	*/
+	int		dma_irq;	/* Controller IRQ		*/
+	struct scatterlist cur_sg;	/* Current controller buffer	*/
+	unsigned int	state;
+
+	struct dma_ops	*d_ops;
+};
+
+/* Prototype: void arch_dma_init(dma)
+ * Purpose  : Initialise architecture specific DMA
+ * Params   : dma - pointer to array of DMA structures
+ */
+extern void arch_dma_init(dma_t *dma);
+
+extern void isa_init_dma(dma_t *dma);
diff --git a/include/asm-arm/mach/flash.h b/arch/arm/include/asm/mach/flash.h
index 05b029ef6371..4ca69fe2c850 100644
--- a/include/asm-arm/mach/flash.h
+++ b/arch/arm/include/asm/mach/flash.h
@@ -1,5 +1,5 @@
 /*
- *  linux/include/asm-arm/mach/flash.h
+ *  arch/arm/include/asm/mach/flash.h
  *
  *  Copyright (C) 2003 Russell King, All Rights Reserved.
  *
diff --git a/arch/arm/include/asm/mach/irda.h b/arch/arm/include/asm/mach/irda.h
new file mode 100644
index 000000000000..38f77b5e56cf
--- /dev/null
+++ b/arch/arm/include/asm/mach/irda.h
@@ -0,0 +1,20 @@
+/*
+ *  arch/arm/include/asm/mach/irda.h
+ *
+ *  Copyright (C) 2004 Russell King.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __ASM_ARM_MACH_IRDA_H
+#define __ASM_ARM_MACH_IRDA_H
+
+struct irda_platform_data {
+	int (*startup)(struct device *);
+	void (*shutdown)(struct device *);
+	int (*set_power)(struct device *, unsigned int state);
+	void (*set_speed)(struct device *, unsigned int speed);
+};
+
+#endif
diff --git a/arch/arm/include/asm/mach/irq.h b/arch/arm/include/asm/mach/irq.h
new file mode 100644
index 000000000000..acac5302e4ea
--- /dev/null
+++ b/arch/arm/include/asm/mach/irq.h
@@ -0,0 +1,34 @@
+/*
+ *  arch/arm/include/asm/mach/irq.h
+ *
+ *  Copyright (C) 1995-2000 Russell King.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __ASM_ARM_MACH_IRQ_H
+#define __ASM_ARM_MACH_IRQ_H
+
+#include <linux/irq.h>
+
+struct seq_file;
+
+/*
+ * This is internal.  Do not use it.
+ */
+extern void (*init_arch_irq)(void);
+extern void init_FIQ(void);
+extern int show_fiq_list(struct seq_file *, void *);
+
+/*
+ * This is for easy migration, but should be changed in the source
+ */
+#define do_bad_IRQ(irq,desc)				\
+do {							\
+	spin_lock(&desc->lock);				\
+	handle_bad_irq(irq, desc);			\
+	spin_unlock(&desc->lock);			\
+} while(0)
+
+#endif
diff --git a/arch/arm/include/asm/mach/map.h b/arch/arm/include/asm/mach/map.h
new file mode 100644
index 000000000000..06f583b13999
--- /dev/null
+++ b/arch/arm/include/asm/mach/map.h
@@ -0,0 +1,36 @@
+/*
+ *  arch/arm/include/asm/map.h
+ *
+ *  Copyright (C) 1999-2000 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ *  Page table mapping constructs and function prototypes
+ */
+#include <asm/io.h>
+
+struct map_desc {
+	unsigned long virtual;
+	unsigned long pfn;
+	unsigned long length;
+	unsigned int type;
+};
+
+/* types 0-3 are defined in asm/io.h */
+#define MT_CACHECLEAN		4
+#define MT_MINICLEAN		5
+#define MT_LOW_VECTORS		6
+#define MT_HIGH_VECTORS		7
+#define MT_MEMORY		8
+#define MT_ROM			9
+
+#define MT_NONSHARED_DEVICE	MT_DEVICE_NONSHARED
+#define MT_IXP2000_DEVICE	MT_DEVICE_IXP2000
+
+#ifdef CONFIG_MMU
+extern void iotable_init(struct map_desc *, int);
+#else
+#define iotable_init(map,num)	do { } while (0)
+#endif
diff --git a/arch/arm/include/asm/mach/mmc.h b/arch/arm/include/asm/mach/mmc.h
new file mode 100644
index 000000000000..4da332b03144
--- /dev/null
+++ b/arch/arm/include/asm/mach/mmc.h
@@ -0,0 +1,15 @@
+/*
+ *  arch/arm/include/asm/mach/mmc.h
+ */
+#ifndef ASMARM_MACH_MMC_H
+#define ASMARM_MACH_MMC_H
+
+#include <linux/mmc/host.h>
+
+struct mmc_platform_data {
+	unsigned int ocr_mask;			/* available voltages */
+	u32 (*translate_vdd)(struct device *, unsigned int);
+	unsigned int (*status)(struct device *);
+};
+
+#endif
diff --git a/arch/arm/include/asm/mach/pci.h b/arch/arm/include/asm/mach/pci.h
new file mode 100644
index 000000000000..32da1ae17e06
--- /dev/null
+++ b/arch/arm/include/asm/mach/pci.h
@@ -0,0 +1,72 @@
+/*
+ *  arch/arm/include/asm/mach/pci.h
+ *
+ *  Copyright (C) 2000 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+struct pci_sys_data;
+struct pci_bus;
+
+struct hw_pci {
+	struct list_head buses;
+	int		nr_controllers;
+	int		(*setup)(int nr, struct pci_sys_data *);
+	struct pci_bus *(*scan)(int nr, struct pci_sys_data *);
+	void		(*preinit)(void);
+	void		(*postinit)(void);
+	u8		(*swizzle)(struct pci_dev *dev, u8 *pin);
+	int		(*map_irq)(struct pci_dev *dev, u8 slot, u8 pin);
+};
+
+/*
+ * Per-controller structure
+ */
+struct pci_sys_data {
+	struct list_head node;
+	int		busnr;		/* primary bus number			*/
+	u64		mem_offset;	/* bus->cpu memory mapping offset	*/
+	unsigned long	io_offset;	/* bus->cpu IO mapping offset		*/
+	struct pci_bus	*bus;		/* PCI bus				*/
+	struct resource *resource[3];	/* Primary PCI bus resources		*/
+					/* Bridge swizzling			*/
+	u8		(*swizzle)(struct pci_dev *, u8 *);
+					/* IRQ mapping				*/
+	int		(*map_irq)(struct pci_dev *, u8, u8);
+	struct hw_pci	*hw;
+};
+
+/*
+ * This is the standard PCI-PCI bridge swizzling algorithm.
+ */
+u8 pci_std_swizzle(struct pci_dev *dev, u8 *pinp);
+
+/*
+ * Call this with your hw_pci struct to initialise the PCI system.
+ */
+void pci_common_init(struct hw_pci *);
+
+/*
+ * PCI controllers
+ */
+extern int iop3xx_pci_setup(int nr, struct pci_sys_data *);
+extern struct pci_bus *iop3xx_pci_scan_bus(int nr, struct pci_sys_data *);
+extern void iop3xx_pci_preinit(void);
+extern void iop3xx_pci_preinit_cond(void);
+
+extern int dc21285_setup(int nr, struct pci_sys_data *);
+extern struct pci_bus *dc21285_scan_bus(int nr, struct pci_sys_data *);
+extern void dc21285_preinit(void);
+extern void dc21285_postinit(void);
+
+extern int via82c505_setup(int nr, struct pci_sys_data *);
+extern struct pci_bus *via82c505_scan_bus(int nr, struct pci_sys_data *);
+extern void via82c505_init(void *sysdata);
+
+extern int pci_v3_setup(int nr, struct pci_sys_data *);
+extern struct pci_bus *pci_v3_scan_bus(int nr, struct pci_sys_data *);
+extern void pci_v3_preinit(void);
+extern void pci_v3_postinit(void);
diff --git a/include/asm-avr32/mach/serial_at91.h b/arch/arm/include/asm/mach/serial_at91.h
index 55b317a89061..ea6d063923b8 100644
--- a/include/asm-avr32/mach/serial_at91.h
+++ b/arch/arm/include/asm/mach/serial_at91.h
@@ -1,5 +1,5 @@
 /*
- *  linux/include/asm-arm/mach/serial_at91.h
+ *  arch/arm/include/asm/mach/serial_at91.h
  *
  *  Based on serial_sa1100.h  by Nicolas Pitre
  *
diff --git a/include/asm-arm/mach/serial_sa1100.h b/arch/arm/include/asm/mach/serial_sa1100.h
index 20c22bb218d9..d09064bf95a0 100644
--- a/include/asm-arm/mach/serial_sa1100.h
+++ b/arch/arm/include/asm/mach/serial_sa1100.h
@@ -1,9 +1,9 @@
 /*
- *  linux/include/asm-arm/mach/serial_sa1100.h
+ *  arch/arm/include/asm/mach/serial_sa1100.h
  *
  *  Author: Nicolas Pitre
  *
- * Moved to include/asm-arm/mach and changed lots, Russell King
+ * Moved and changed lots, Russell King
  *
  * Low level machine dependent UART functions.
  */
diff --git a/include/asm-arm/mach/sharpsl_param.h b/arch/arm/include/asm/mach/sharpsl_param.h
index 7a24ecf04220..7a24ecf04220 100644
--- a/include/asm-arm/mach/sharpsl_param.h
+++ b/arch/arm/include/asm/mach/sharpsl_param.h
diff --git a/arch/arm/include/asm/mach/time.h b/arch/arm/include/asm/mach/time.h
new file mode 100644
index 000000000000..b2cc1fcd0400
--- /dev/null
+++ b/arch/arm/include/asm/mach/time.h
@@ -0,0 +1,57 @@
+/*
+ * arch/arm/include/asm/mach/time.h
+ *
+ * Copyright (C) 2004 MontaVista Software, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __ASM_ARM_MACH_TIME_H
+#define __ASM_ARM_MACH_TIME_H
+
+#include <linux/sysdev.h>
+
+/*
+ * This is our kernel timer structure.
+ *
+ * - init
+ *   Initialise the kernels jiffy timer source, claim interrupt
+ *   using setup_irq.  This is called early on during initialisation
+ *   while interrupts are still disabled on the local CPU.
+ * - suspend
+ *   Suspend the kernel jiffy timer source, if necessary.  This
+ *   is called with interrupts disabled, after all normal devices
+ *   have been suspended.  If no action is required, set this to
+ *   NULL.
+ * - resume
+ *   Resume the kernel jiffy timer source, if necessary.  This
+ *   is called with interrupts disabled before any normal devices
+ *   are resumed.  If no action is required, set this to NULL.
+ * - offset
+ *   Return the timer offset in microseconds since the last timer
+ *   interrupt.  Note: this must take account of any unprocessed
+ *   timer interrupt which may be pending.
+ */
+struct sys_timer {
+	struct sys_device	dev;
+	void			(*init)(void);
+	void			(*suspend)(void);
+	void			(*resume)(void);
+#ifndef CONFIG_GENERIC_TIME
+	unsigned long		(*offset)(void);
+#endif
+};
+
+extern struct sys_timer *system_timer;
+extern void timer_tick(void);
+
+/*
+ * Kernel time keeping support.
+ */
+struct timespec;
+extern int (*set_rtc)(void);
+extern void save_time_delta(struct timespec *delta, struct timespec *rtc);
+extern void restore_time_delta(struct timespec *delta, struct timespec *rtc);
+
+#endif
diff --git a/include/asm-arm/mach/udc_pxa2xx.h b/arch/arm/include/asm/mach/udc_pxa2xx.h
index 9e5ed7c0f27f..270902c353fd 100644
--- a/include/asm-arm/mach/udc_pxa2xx.h
+++ b/arch/arm/include/asm/mach/udc_pxa2xx.h
@@ -1,5 +1,5 @@
 /*
- * linux/include/asm-arm/mach/udc_pxa2xx.h
+ * arch/arm/include/asm/mach/udc_pxa2xx.h
  *
  * This supports machine-specific differences in how the PXA2xx
  * USB Device Controller (UDC) is wired.
diff --git a/arch/arm/include/asm/mc146818rtc.h b/arch/arm/include/asm/mc146818rtc.h
new file mode 100644
index 000000000000..e1ca48a9e973
--- /dev/null
+++ b/arch/arm/include/asm/mc146818rtc.h
@@ -0,0 +1,28 @@
+/*
+ * Machine dependent access functions for RTC registers.
+ */
+#ifndef _ASM_MC146818RTC_H
+#define _ASM_MC146818RTC_H
+
+#include <mach/irqs.h>
+#include <asm/io.h>
+
+#ifndef RTC_PORT
+#define RTC_PORT(x)	(0x70 + (x))
+#define RTC_ALWAYS_BCD	1	/* RTC operates in binary mode */
+#endif
+
+/*
+ * The yet supported machines all access the RTC index register via
+ * an ISA port access but the way to access the date register differs ...
+ */
+#define CMOS_READ(addr) ({ \
+outb_p((addr),RTC_PORT(0)); \
+inb_p(RTC_PORT(1)); \
+})
+#define CMOS_WRITE(val, addr) ({ \
+outb_p((addr),RTC_PORT(0)); \
+outb_p((val),RTC_PORT(1)); \
+})
+
+#endif /* _ASM_MC146818RTC_H */
diff --git a/arch/arm/include/asm/memory.h b/arch/arm/include/asm/memory.h
new file mode 100644
index 000000000000..bf7c737c9226
--- /dev/null
+++ b/arch/arm/include/asm/memory.h
@@ -0,0 +1,328 @@
+/*
+ *  arch/arm/include/asm/memory.h
+ *
+ *  Copyright (C) 2000-2002 Russell King
+ *  modification for nommu, Hyok S. Choi, 2004
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ *  Note: this file should not be included by non-asm/.h files
+ */
+#ifndef __ASM_ARM_MEMORY_H
+#define __ASM_ARM_MEMORY_H
+
+/*
+ * Allow for constants defined here to be used from assembly code
+ * by prepending the UL suffix only with actual C code compilation.
+ */
+#ifndef __ASSEMBLY__
+#define UL(x) (x##UL)
+#else
+#define UL(x) (x)
+#endif
+
+#include <linux/compiler.h>
+#include <mach/memory.h>
+#include <asm/sizes.h>
+
+#ifdef CONFIG_MMU
+
+#ifndef TASK_SIZE
+/*
+ * TASK_SIZE - the maximum size of a user space task.
+ * TASK_UNMAPPED_BASE - the lower boundary of the mmap VM area
+ */
+#define TASK_SIZE		UL(0xbf000000)
+#define TASK_UNMAPPED_BASE	UL(0x40000000)
+#endif
+
+/*
+ * The maximum size of a 26-bit user space task.
+ */
+#define TASK_SIZE_26		UL(0x04000000)
+
+/*
+ * Page offset: 3GB
+ */
+#ifndef PAGE_OFFSET
+#define PAGE_OFFSET		UL(0xc0000000)
+#endif
+
+/*
+ * The module space lives between the addresses given by TASK_SIZE
+ * and PAGE_OFFSET - it must be within 32MB of the kernel text.
+ */
+#define MODULE_END		(PAGE_OFFSET)
+#define MODULE_START		(MODULE_END - 16*1048576)
+
+#if TASK_SIZE > MODULE_START
+#error Top of user space clashes with start of module space
+#endif
+
+/*
+ * The XIP kernel gets mapped at the bottom of the module vm area.
+ * Since we use sections to map it, this macro replaces the physical address
+ * with its virtual address while keeping offset from the base section.
+ */
+#define XIP_VIRT_ADDR(physaddr)  (MODULE_START + ((physaddr) & 0x000fffff))
+
+/*
+ * Allow 16MB-aligned ioremap pages
+ */
+#define IOREMAP_MAX_ORDER	24
+
+#else /* CONFIG_MMU */
+
+/*
+ * The limitation of user task size can grow up to the end of free ram region.
+ * It is difficult to define and perhaps will never meet the original meaning
+ * of this define that was meant to.
+ * Fortunately, there is no reference for this in noMMU mode, for now.
+ */
+#ifndef TASK_SIZE
+#define TASK_SIZE		(CONFIG_DRAM_SIZE)
+#endif
+
+#ifndef TASK_UNMAPPED_BASE
+#define TASK_UNMAPPED_BASE	UL(0x00000000)
+#endif
+
+#ifndef PHYS_OFFSET
+#define PHYS_OFFSET 		(CONFIG_DRAM_BASE)
+#endif
+
+#ifndef END_MEM
+#define END_MEM     		(CONFIG_DRAM_BASE + CONFIG_DRAM_SIZE)
+#endif
+
+#ifndef PAGE_OFFSET
+#define PAGE_OFFSET		(PHYS_OFFSET)
+#endif
+
+/*
+ * The module can be at any place in ram in nommu mode.
+ */
+#define MODULE_END		(END_MEM)
+#define MODULE_START		(PHYS_OFFSET)
+
+#endif /* !CONFIG_MMU */
+
+/*
+ * Size of DMA-consistent memory region.  Must be multiple of 2M,
+ * between 2MB and 14MB inclusive.
+ */
+#ifndef CONSISTENT_DMA_SIZE
+#define CONSISTENT_DMA_SIZE SZ_2M
+#endif
+
+/*
+ * Physical vs virtual RAM address space conversion.  These are
+ * private definitions which should NOT be used outside memory.h
+ * files.  Use virt_to_phys/phys_to_virt/__pa/__va instead.
+ */
+#ifndef __virt_to_phys
+#define __virt_to_phys(x)	((x) - PAGE_OFFSET + PHYS_OFFSET)
+#define __phys_to_virt(x)	((x) - PHYS_OFFSET + PAGE_OFFSET)
+#endif
+
+/*
+ * Convert a physical address to a Page Frame Number and back
+ */
+#define	__phys_to_pfn(paddr)	((paddr) >> PAGE_SHIFT)
+#define	__pfn_to_phys(pfn)	((pfn) << PAGE_SHIFT)
+
+#ifndef __ASSEMBLY__
+
+/*
+ * The DMA mask corresponding to the maximum bus address allocatable
+ * using GFP_DMA.  The default here places no restriction on DMA
+ * allocations.  This must be the smallest DMA mask in the system,
+ * so a successful GFP_DMA allocation will always satisfy this.
+ */
+#ifndef ISA_DMA_THRESHOLD
+#define ISA_DMA_THRESHOLD	(0xffffffffULL)
+#endif
+
+#ifndef arch_adjust_zones
+#define arch_adjust_zones(node,size,holes) do { } while (0)
+#endif
+
+/*
+ * Amount of memory reserved for the vmalloc() area, and minimum
+ * address for vmalloc mappings.
+ */
+extern unsigned long vmalloc_reserve;
+
+#define VMALLOC_MIN		(void *)(VMALLOC_END - vmalloc_reserve)
+
+/*
+ * PFNs are used to describe any physical page; this means
+ * PFN 0 == physical address 0.
+ *
+ * This is the PFN of the first RAM page in the kernel
+ * direct-mapped view.  We assume this is the first page
+ * of RAM in the mem_map as well.
+ */
+#define PHYS_PFN_OFFSET	(PHYS_OFFSET >> PAGE_SHIFT)
+
+/*
+ * These are *only* valid on the kernel direct mapped RAM memory.
+ * Note: Drivers should NOT use these.  They are the wrong
+ * translation for translating DMA addresses.  Use the driver
+ * DMA support - see dma-mapping.h.
+ */
+static inline unsigned long virt_to_phys(void *x)
+{
+	return __virt_to_phys((unsigned long)(x));
+}
+
+static inline void *phys_to_virt(unsigned long x)
+{
+	return (void *)(__phys_to_virt((unsigned long)(x)));
+}
+
+/*
+ * Drivers should NOT use these either.
+ */
+#define __pa(x)			__virt_to_phys((unsigned long)(x))
+#define __va(x)			((void *)__phys_to_virt((unsigned long)(x)))
+#define pfn_to_kaddr(pfn)	__va((pfn) << PAGE_SHIFT)
+
+/*
+ * Virtual <-> DMA view memory address translations
+ * Again, these are *only* valid on the kernel direct mapped RAM
+ * memory.  Use of these is *deprecated* (and that doesn't mean
+ * use the __ prefixed forms instead.)  See dma-mapping.h.
+ */
+static inline __deprecated unsigned long virt_to_bus(void *x)
+{
+	return __virt_to_bus((unsigned long)x);
+}
+
+static inline __deprecated void *bus_to_virt(unsigned long x)
+{
+	return (void *)__bus_to_virt(x);
+}
+
+/*
+ * Conversion between a struct page and a physical address.
+ *
+ * Note: when converting an unknown physical address to a
+ * struct page, the resulting pointer must be validated
+ * using VALID_PAGE().  It must return an invalid struct page
+ * for any physical address not corresponding to a system
+ * RAM address.
+ *
+ *  page_to_pfn(page)	convert a struct page * to a PFN number
+ *  pfn_to_page(pfn)	convert a _valid_ PFN number to struct page *
+ *  pfn_valid(pfn)	indicates whether a PFN number is valid
+ *
+ *  virt_to_page(k)	convert a _valid_ virtual address to struct page *
+ *  virt_addr_valid(k)	indicates whether a virtual address is valid
+ */
+#ifndef CONFIG_DISCONTIGMEM
+
+#define ARCH_PFN_OFFSET		PHYS_PFN_OFFSET
+
+#ifndef CONFIG_SPARSEMEM
+#define pfn_valid(pfn)		((pfn) >= PHYS_PFN_OFFSET && (pfn) < (PHYS_PFN_OFFSET + max_mapnr))
+#endif
+
+#define virt_to_page(kaddr)	pfn_to_page(__pa(kaddr) >> PAGE_SHIFT)
+#define virt_addr_valid(kaddr)	((unsigned long)(kaddr) >= PAGE_OFFSET && (unsigned long)(kaddr) < (unsigned long)high_memory)
+
+#define PHYS_TO_NID(addr)	(0)
+
+#else /* CONFIG_DISCONTIGMEM */
+
+/*
+ * This is more complex.  We have a set of mem_map arrays spread
+ * around in memory.
+ */
+#include <linux/numa.h>
+
+#define arch_pfn_to_nid(pfn)	PFN_TO_NID(pfn)
+#define arch_local_page_offset(pfn, nid) LOCAL_MAP_NR((pfn) << PAGE_SHIFT)
+
+#define pfn_valid(pfn)						\
+	({							\
+		unsigned int nid = PFN_TO_NID(pfn);		\
+		int valid = nid < MAX_NUMNODES;			\
+		if (valid) {					\
+			pg_data_t *node = NODE_DATA(nid);	\
+			valid = (pfn - node->node_start_pfn) <	\
+				node->node_spanned_pages;	\
+		}						\
+		valid;						\
+	})
+
+#define virt_to_page(kaddr)					\
+	(ADDR_TO_MAPBASE(kaddr) + LOCAL_MAP_NR(kaddr))
+
+#define virt_addr_valid(kaddr)	(KVADDR_TO_NID(kaddr) < MAX_NUMNODES)
+
+/*
+ * Common discontigmem stuff.
+ *  PHYS_TO_NID is used by the ARM kernel/setup.c
+ */
+#define PHYS_TO_NID(addr)	PFN_TO_NID((addr) >> PAGE_SHIFT)
+
+/*
+ * Given a kaddr, ADDR_TO_MAPBASE finds the owning node of the memory
+ * and returns the mem_map of that node.
+ */
+#define ADDR_TO_MAPBASE(kaddr)	NODE_MEM_MAP(KVADDR_TO_NID(kaddr))
+
+/*
+ * Given a page frame number, find the owning node of the memory
+ * and returns the mem_map of that node.
+ */
+#define PFN_TO_MAPBASE(pfn)	NODE_MEM_MAP(PFN_TO_NID(pfn))
+
+#ifdef NODE_MEM_SIZE_BITS
+#define NODE_MEM_SIZE_MASK	((1 << NODE_MEM_SIZE_BITS) - 1)
+
+/*
+ * Given a kernel address, find the home node of the underlying memory.
+ */
+#define KVADDR_TO_NID(addr) \
+	(((unsigned long)(addr) - PAGE_OFFSET) >> NODE_MEM_SIZE_BITS)
+
+/*
+ * Given a page frame number, convert it to a node id.
+ */
+#define PFN_TO_NID(pfn) \
+	(((pfn) - PHYS_PFN_OFFSET) >> (NODE_MEM_SIZE_BITS - PAGE_SHIFT))
+
+/*
+ * Given a kaddr, LOCAL_MEM_MAP finds the owning node of the memory
+ * and returns the index corresponding to the appropriate page in the
+ * node's mem_map.
+ */
+#define LOCAL_MAP_NR(addr) \
+	(((unsigned long)(addr) & NODE_MEM_SIZE_MASK) >> PAGE_SHIFT)
+
+#endif /* NODE_MEM_SIZE_BITS */
+
+#endif /* !CONFIG_DISCONTIGMEM */
+
+/*
+ * For BIO.  "will die".  Kill me when bio_to_phys() and bvec_to_phys() die.
+ */
+#define page_to_phys(page)	(page_to_pfn(page) << PAGE_SHIFT)
+
+/*
+ * Optional coherency support.  Currently used only by selected
+ * Intel XSC3-based systems.
+ */
+#ifndef arch_is_coherent
+#define arch_is_coherent()		0
+#endif
+
+#endif
+
+#include <asm-generic/memory_model.h>
+
+#endif
diff --git a/include/asm-arm/mman.h b/arch/arm/include/asm/mman.h
index 54570d2e95b7..54570d2e95b7 100644
--- a/include/asm-arm/mman.h
+++ b/arch/arm/include/asm/mman.h
diff --git a/include/asm-arm/mmu.h b/arch/arm/include/asm/mmu.h
index 53099d4ee421..53099d4ee421 100644
--- a/include/asm-arm/mmu.h
+++ b/arch/arm/include/asm/mmu.h
diff --git a/arch/arm/include/asm/mmu_context.h b/arch/arm/include/asm/mmu_context.h
new file mode 100644
index 000000000000..a301e446007f
--- /dev/null
+++ b/arch/arm/include/asm/mmu_context.h
@@ -0,0 +1,117 @@
+/*
+ *  arch/arm/include/asm/mmu_context.h
+ *
+ *  Copyright (C) 1996 Russell King.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ *  Changelog:
+ *   27-06-1996	RMK	Created
+ */
+#ifndef __ASM_ARM_MMU_CONTEXT_H
+#define __ASM_ARM_MMU_CONTEXT_H
+
+#include <linux/compiler.h>
+#include <asm/cacheflush.h>
+#include <asm/proc-fns.h>
+#include <asm-generic/mm_hooks.h>
+
+void __check_kvm_seq(struct mm_struct *mm);
+
+#ifdef CONFIG_CPU_HAS_ASID
+
+/*
+ * On ARMv6, we have the following structure in the Context ID:
+ *
+ * 31                         7          0
+ * +-------------------------+-----------+
+ * |      process ID         |   ASID    |
+ * +-------------------------+-----------+
+ * |              context ID             |
+ * +-------------------------------------+
+ *
+ * The ASID is used to tag entries in the CPU caches and TLBs.
+ * The context ID is used by debuggers and trace logic, and
+ * should be unique within all running processes.
+ */
+#define ASID_BITS		8
+#define ASID_MASK		((~0) << ASID_BITS)
+#define ASID_FIRST_VERSION	(1 << ASID_BITS)
+
+extern unsigned int cpu_last_asid;
+
+void __init_new_context(struct task_struct *tsk, struct mm_struct *mm);
+void __new_context(struct mm_struct *mm);
+
+static inline void check_context(struct mm_struct *mm)
+{
+	if (unlikely((mm->context.id ^ cpu_last_asid) >> ASID_BITS))
+		__new_context(mm);
+
+	if (unlikely(mm->context.kvm_seq != init_mm.context.kvm_seq))
+		__check_kvm_seq(mm);
+}
+
+#define init_new_context(tsk,mm)	(__init_new_context(tsk,mm),0)
+
+#else
+
+static inline void check_context(struct mm_struct *mm)
+{
+	if (unlikely(mm->context.kvm_seq != init_mm.context.kvm_seq))
+		__check_kvm_seq(mm);
+}
+
+#define init_new_context(tsk,mm)	0
+
+#endif
+
+#define destroy_context(mm)		do { } while(0)
+
+/*
+ * This is called when "tsk" is about to enter lazy TLB mode.
+ *
+ * mm:  describes the currently active mm context
+ * tsk: task which is entering lazy tlb
+ * cpu: cpu number which is entering lazy tlb
+ *
+ * tsk->mm will be NULL
+ */
+static inline void
+enter_lazy_tlb(struct mm_struct *mm, struct task_struct *tsk)
+{
+}
+
+/*
+ * This is the actual mm switch as far as the scheduler
+ * is concerned.  No registers are touched.  We avoid
+ * calling the CPU specific function when the mm hasn't
+ * actually changed.
+ */
+static inline void
+switch_mm(struct mm_struct *prev, struct mm_struct *next,
+	  struct task_struct *tsk)
+{
+#ifdef CONFIG_MMU
+	unsigned int cpu = smp_processor_id();
+
+#ifdef CONFIG_SMP
+	/* check for possible thread migration */
+	if (!cpus_empty(next->cpu_vm_mask) && !cpu_isset(cpu, next->cpu_vm_mask))
+		__flush_icache_all();
+#endif
+	if (!cpu_test_and_set(cpu, next->cpu_vm_mask) || prev != next) {
+		check_context(next);
+		cpu_switch_mm(next->pgd, next);
+		if (cache_is_vivt())
+			cpu_clear(cpu, prev->cpu_vm_mask);
+	}
+#endif
+}
+
+#define deactivate_mm(tsk,mm)	do { } while (0)
+#define activate_mm(prev,next)	switch_mm(prev, next, NULL)
+
+#endif
diff --git a/arch/arm/include/asm/mmzone.h b/arch/arm/include/asm/mmzone.h
new file mode 100644
index 000000000000..ae63a4fd28c8
--- /dev/null
+++ b/arch/arm/include/asm/mmzone.h
@@ -0,0 +1,30 @@
+/*
+ *  arch/arm/include/asm/mmzone.h
+ *
+ *  1999-12-29	Nicolas Pitre		Created
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __ASM_MMZONE_H
+#define __ASM_MMZONE_H
+
+/*
+ * Currently defined in arch/arm/mm/discontig.c
+ */
+extern pg_data_t discontig_node_data[];
+
+/*
+ * Return a pointer to the node data for node n.
+ */
+#define NODE_DATA(nid)		(&discontig_node_data[nid])
+
+/*
+ * NODE_MEM_MAP gives the kaddr for the mem_map of the node.
+ */
+#define NODE_MEM_MAP(nid)	(NODE_DATA(nid)->node_mem_map)
+
+#include <mach/memory.h>
+
+#endif
diff --git a/include/asm-arm/module.h b/arch/arm/include/asm/module.h
index 24b168dc31a3..24b168dc31a3 100644
--- a/include/asm-arm/module.h
+++ b/arch/arm/include/asm/module.h
diff --git a/include/asm-arm/msgbuf.h b/arch/arm/include/asm/msgbuf.h
index 33b35b946eaa..33b35b946eaa 100644
--- a/include/asm-arm/msgbuf.h
+++ b/arch/arm/include/asm/msgbuf.h
diff --git a/arch/arm/include/asm/mtd-xip.h b/arch/arm/include/asm/mtd-xip.h
new file mode 100644
index 000000000000..d8fbe2d9b8b9
--- /dev/null
+++ b/arch/arm/include/asm/mtd-xip.h
@@ -0,0 +1,24 @@
+/*
+ * MTD primitives for XIP support. Architecture specific functions
+ *
+ * Do not include this file directly. It's included from linux/mtd/xip.h
+ * 
+ * Author:	Nicolas Pitre
+ * Created:	Nov 2, 2004
+ * Copyright:	(C) 2004 MontaVista Software, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ARM_MTD_XIP_H__
+#define __ARM_MTD_XIP_H__
+
+#include <mach/hardware.h>
+#include <mach/mtd-xip.h>
+
+/* fill instruction prefetch */
+#define xip_iprefetch() 	do { asm volatile (".rep 8; nop; .endr"); } while (0)
+
+#endif /* __ARM_MTD_XIP_H__ */
diff --git a/arch/arm/include/asm/mutex.h b/arch/arm/include/asm/mutex.h
new file mode 100644
index 000000000000..93226cf23ae0
--- /dev/null
+++ b/arch/arm/include/asm/mutex.h
@@ -0,0 +1,127 @@
+/*
+ * arch/arm/include/asm/mutex.h
+ *
+ * ARM optimized mutex locking primitives
+ *
+ * Please look into asm-generic/mutex-xchg.h for a formal definition.
+ */
+#ifndef _ASM_MUTEX_H
+#define _ASM_MUTEX_H
+
+#if __LINUX_ARM_ARCH__ < 6
+/* On pre-ARMv6 hardware the swp based implementation is the most efficient. */
+# include <asm-generic/mutex-xchg.h>
+#else
+
+/*
+ * Attempting to lock a mutex on ARMv6+ can be done with a bastardized
+ * atomic decrement (it is not a reliable atomic decrement but it satisfies
+ * the defined semantics for our purpose, while being smaller and faster
+ * than a real atomic decrement or atomic swap.  The idea is to attempt
+ * decrementing the lock value only once.  If once decremented it isn't zero,
+ * or if its store-back fails due to a dispute on the exclusive store, we
+ * simply bail out immediately through the slow path where the lock will be
+ * reattempted until it succeeds.
+ */
+static inline void
+__mutex_fastpath_lock(atomic_t *count, void (*fail_fn)(atomic_t *))
+{
+	int __ex_flag, __res;
+
+	__asm__ (
+
+		"ldrex	%0, [%2]	\n\t"
+		"sub	%0, %0, #1	\n\t"
+		"strex	%1, %0, [%2]	"
+
+		: "=&r" (__res), "=&r" (__ex_flag)
+		: "r" (&(count)->counter)
+		: "cc","memory" );
+
+	__res |= __ex_flag;
+	if (unlikely(__res != 0))
+		fail_fn(count);
+}
+
+static inline int
+__mutex_fastpath_lock_retval(atomic_t *count, int (*fail_fn)(atomic_t *))
+{
+	int __ex_flag, __res;
+
+	__asm__ (
+
+		"ldrex	%0, [%2]	\n\t"
+		"sub	%0, %0, #1	\n\t"
+		"strex	%1, %0, [%2]	"
+
+		: "=&r" (__res), "=&r" (__ex_flag)
+		: "r" (&(count)->counter)
+		: "cc","memory" );
+
+	__res |= __ex_flag;
+	if (unlikely(__res != 0))
+		__res = fail_fn(count);
+	return __res;
+}
+
+/*
+ * Same trick is used for the unlock fast path. However the original value,
+ * rather than the result, is used to test for success in order to have
+ * better generated assembly.
+ */
+static inline void
+__mutex_fastpath_unlock(atomic_t *count, void (*fail_fn)(atomic_t *))
+{
+	int __ex_flag, __res, __orig;
+
+	__asm__ (
+
+		"ldrex	%0, [%3]	\n\t"
+		"add	%1, %0, #1	\n\t"
+		"strex	%2, %1, [%3]	"
+
+		: "=&r" (__orig), "=&r" (__res), "=&r" (__ex_flag)
+		: "r" (&(count)->counter)
+		: "cc","memory" );
+
+	__orig |= __ex_flag;
+	if (unlikely(__orig != 0))
+		fail_fn(count);
+}
+
+/*
+ * If the unlock was done on a contended lock, or if the unlock simply fails
+ * then the mutex remains locked.
+ */
+#define __mutex_slowpath_needs_to_unlock()	1
+
+/*
+ * For __mutex_fastpath_trylock we use another construct which could be
+ * described as a "single value cmpxchg".
+ *
+ * This provides the needed trylock semantics like cmpxchg would, but it is
+ * lighter and less generic than a true cmpxchg implementation.
+ */
+static inline int
+__mutex_fastpath_trylock(atomic_t *count, int (*fail_fn)(atomic_t *))
+{
+	int __ex_flag, __res, __orig;
+
+	__asm__ (
+
+		"1: ldrex	%0, [%3]	\n\t"
+		"subs		%1, %0, #1	\n\t"
+		"strexeq	%2, %1, [%3]	\n\t"
+		"movlt		%0, #0		\n\t"
+		"cmpeq		%2, #0		\n\t"
+		"bgt		1b		"
+
+		: "=&r" (__orig), "=&r" (__res), "=&r" (__ex_flag)
+		: "r" (&count->counter)
+		: "cc", "memory" );
+
+	return __orig;
+}
+
+#endif
+#endif
diff --git a/include/asm-arm/nwflash.h b/arch/arm/include/asm/nwflash.h
index 04e5a557a884..04e5a557a884 100644
--- a/include/asm-arm/nwflash.h
+++ b/arch/arm/include/asm/nwflash.h
diff --git a/include/asm-arm/page-nommu.h b/arch/arm/include/asm/page-nommu.h
index ea1cde84f500..3574c0deb37f 100644
--- a/include/asm-arm/page-nommu.h
+++ b/arch/arm/include/asm/page-nommu.h
@@ -1,5 +1,5 @@
 /*
- *  linux/include/asm-arm/page-nommu.h
+ *  arch/arm/include/asm/page-nommu.h
  *
  *  Copyright (C) 2004 Hyok S. Choi
  *
diff --git a/arch/arm/include/asm/page.h b/arch/arm/include/asm/page.h
new file mode 100644
index 000000000000..cf2e2680daaa
--- /dev/null
+++ b/arch/arm/include/asm/page.h
@@ -0,0 +1,199 @@
+/*
+ *  arch/arm/include/asm/page.h
+ *
+ *  Copyright (C) 1995-2003 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef _ASMARM_PAGE_H
+#define _ASMARM_PAGE_H
+
+/* PAGE_SHIFT determines the page size */
+#define PAGE_SHIFT		12
+#define PAGE_SIZE		(1UL << PAGE_SHIFT)
+#define PAGE_MASK		(~(PAGE_SIZE-1))
+
+#ifndef __ASSEMBLY__
+
+#ifndef CONFIG_MMU
+
+#include "page-nommu.h"
+
+#else
+
+#include <asm/glue.h>
+
+/*
+ *	User Space Model
+ *	================
+ *
+ *	This section selects the correct set of functions for dealing with
+ *	page-based copying and clearing for user space for the particular
+ *	processor(s) we're building for.
+ *
+ *	We have the following to choose from:
+ *	  v3		- ARMv3
+ *	  v4wt		- ARMv4 with writethrough cache, without minicache
+ *	  v4wb		- ARMv4 with writeback cache, without minicache
+ *	  v4_mc		- ARMv4 with minicache
+ *	  xscale	- Xscale
+ *	  xsc3		- XScalev3
+ */
+#undef _USER
+#undef MULTI_USER
+
+#ifdef CONFIG_CPU_COPY_V3
+# ifdef _USER
+#  define MULTI_USER 1
+# else
+#  define _USER v3
+# endif
+#endif
+
+#ifdef CONFIG_CPU_COPY_V4WT
+# ifdef _USER
+#  define MULTI_USER 1
+# else
+#  define _USER v4wt
+# endif
+#endif
+
+#ifdef CONFIG_CPU_COPY_V4WB
+# ifdef _USER
+#  define MULTI_USER 1
+# else
+#  define _USER v4wb
+# endif
+#endif
+
+#ifdef CONFIG_CPU_COPY_FEROCEON
+# ifdef _USER
+#  define MULTI_USER 1
+# else
+#  define _USER feroceon
+# endif
+#endif
+
+#ifdef CONFIG_CPU_SA1100
+# ifdef _USER
+#  define MULTI_USER 1
+# else
+#  define _USER v4_mc
+# endif
+#endif
+
+#ifdef CONFIG_CPU_XSCALE
+# ifdef _USER
+#  define MULTI_USER 1
+# else
+#  define _USER xscale_mc
+# endif
+#endif
+
+#ifdef CONFIG_CPU_XSC3
+# ifdef _USER
+#  define MULTI_USER 1
+# else
+#  define _USER xsc3_mc
+# endif
+#endif
+
+#ifdef CONFIG_CPU_COPY_V6
+# define MULTI_USER 1
+#endif
+
+#if !defined(_USER) && !defined(MULTI_USER)
+#error Unknown user operations model
+#endif
+
+struct cpu_user_fns {
+	void (*cpu_clear_user_page)(void *p, unsigned long user);
+	void (*cpu_copy_user_page)(void *to, const void *from,
+				   unsigned long user);
+};
+
+#ifdef MULTI_USER
+extern struct cpu_user_fns cpu_user;
+
+#define __cpu_clear_user_page	cpu_user.cpu_clear_user_page
+#define __cpu_copy_user_page	cpu_user.cpu_copy_user_page
+
+#else
+
+#define __cpu_clear_user_page	__glue(_USER,_clear_user_page)
+#define __cpu_copy_user_page	__glue(_USER,_copy_user_page)
+
+extern void __cpu_clear_user_page(void *p, unsigned long user);
+extern void __cpu_copy_user_page(void *to, const void *from,
+				 unsigned long user);
+#endif
+
+#define clear_user_page(addr,vaddr,pg)	 __cpu_clear_user_page(addr, vaddr)
+#define copy_user_page(to,from,vaddr,pg) __cpu_copy_user_page(to, from, vaddr)
+
+#define clear_page(page)	memzero((void *)(page), PAGE_SIZE)
+extern void copy_page(void *to, const void *from);
+
+#undef STRICT_MM_TYPECHECKS
+
+#ifdef STRICT_MM_TYPECHECKS
+/*
+ * These are used to make use of C type-checking..
+ */
+typedef struct { unsigned long pte; } pte_t;
+typedef struct { unsigned long pmd; } pmd_t;
+typedef struct { unsigned long pgd[2]; } pgd_t;
+typedef struct { unsigned long pgprot; } pgprot_t;
+
+#define pte_val(x)      ((x).pte)
+#define pmd_val(x)      ((x).pmd)
+#define pgd_val(x)	((x).pgd[0])
+#define pgprot_val(x)   ((x).pgprot)
+
+#define __pte(x)        ((pte_t) { (x) } )
+#define __pmd(x)        ((pmd_t) { (x) } )
+#define __pgprot(x)     ((pgprot_t) { (x) } )
+
+#else
+/*
+ * .. while these make it easier on the compiler
+ */
+typedef unsigned long pte_t;
+typedef unsigned long pmd_t;
+typedef unsigned long pgd_t[2];
+typedef unsigned long pgprot_t;
+
+#define pte_val(x)      (x)
+#define pmd_val(x)      (x)
+#define pgd_val(x)	((x)[0])
+#define pgprot_val(x)   (x)
+
+#define __pte(x)        (x)
+#define __pmd(x)        (x)
+#define __pgprot(x)     (x)
+
+#endif /* STRICT_MM_TYPECHECKS */
+
+#endif /* CONFIG_MMU */
+
+typedef struct page *pgtable_t;
+
+#include <asm/memory.h>
+
+#endif /* !__ASSEMBLY__ */
+
+#define VM_DATA_DEFAULT_FLAGS	(VM_READ | VM_WRITE | VM_EXEC | \
+				 VM_MAYREAD | VM_MAYWRITE | VM_MAYEXEC)
+
+/*
+ * With EABI on ARMv5 and above we must have 64-bit aligned slab pointers.
+ */
+#if defined(CONFIG_AEABI) && (__LINUX_ARM_ARCH__ >= 5)
+#define ARCH_SLAB_MINALIGN 8
+#endif
+
+#include <asm-generic/page.h>
+
+#endif
diff --git a/arch/arm/include/asm/param.h b/arch/arm/include/asm/param.h
new file mode 100644
index 000000000000..8b24bf94c06b
--- /dev/null
+++ b/arch/arm/include/asm/param.h
@@ -0,0 +1,31 @@
+/*
+ *  arch/arm/include/asm/param.h
+ *
+ *  Copyright (C) 1995-1999 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __ASM_PARAM_H
+#define __ASM_PARAM_H
+
+#ifdef __KERNEL__
+# define HZ		CONFIG_HZ	/* Internal kernel timer frequency */
+# define USER_HZ	100		/* User interfaces are in "ticks" */
+# define CLOCKS_PER_SEC	(USER_HZ)	/* like times() */
+#else
+# define HZ		100
+#endif
+
+#define EXEC_PAGESIZE	4096
+
+#ifndef NOGROUP
+#define NOGROUP         (-1)
+#endif
+
+/* max length of hostname */
+#define MAXHOSTNAMELEN  64
+
+#endif
+
diff --git a/arch/arm/include/asm/parport.h b/arch/arm/include/asm/parport.h
new file mode 100644
index 000000000000..26e94b09035a
--- /dev/null
+++ b/arch/arm/include/asm/parport.h
@@ -0,0 +1,18 @@
+/*
+ *  arch/arm/include/asm/parport.h: ARM-specific parport initialisation
+ *
+ *  Copyright (C) 1999, 2000  Tim Waugh <tim@cyberelk.demon.co.uk>
+ *
+ * This file should only be included by drivers/parport/parport_pc.c.
+ */
+
+#ifndef __ASMARM_PARPORT_H
+#define __ASMARM_PARPORT_H
+
+static int __devinit parport_pc_find_isa_ports (int autoirq, int autodma);
+static int __devinit parport_pc_find_nonpci_ports (int autoirq, int autodma)
+{
+	return parport_pc_find_isa_ports (autoirq, autodma);
+}
+
+#endif /* !(_ASMARM_PARPORT_H) */
diff --git a/arch/arm/include/asm/pci.h b/arch/arm/include/asm/pci.h
new file mode 100644
index 000000000000..721c03d53f4b
--- /dev/null
+++ b/arch/arm/include/asm/pci.h
@@ -0,0 +1,91 @@
+#ifndef ASMARM_PCI_H
+#define ASMARM_PCI_H
+
+#ifdef __KERNEL__
+#include <asm-generic/pci-dma-compat.h>
+
+#include <mach/hardware.h> /* for PCIBIOS_MIN_* */
+
+#define pcibios_scan_all_fns(a, b)	0
+
+#ifdef CONFIG_PCI_HOST_ITE8152
+/* ITE bridge requires setting latency timer to avoid early bus access
+   termination by PIC bus mater devices
+*/
+extern void pcibios_set_master(struct pci_dev *dev);
+#else
+static inline void pcibios_set_master(struct pci_dev *dev)
+{
+	/* No special bus mastering setup handling */
+}
+#endif
+
+static inline void pcibios_penalize_isa_irq(int irq, int active)
+{
+	/* We don't do dynamic PCI IRQ allocation */
+}
+
+/*
+ * The PCI address space does equal the physical memory address space.
+ * The networking and block device layers use this boolean for bounce
+ * buffer decisions.
+ */
+#define PCI_DMA_BUS_IS_PHYS     (0)
+
+/*
+ * Whether pci_unmap_{single,page} is a nop depends upon the
+ * configuration.
+ */
+#define DECLARE_PCI_UNMAP_ADDR(ADDR_NAME)	dma_addr_t ADDR_NAME;
+#define DECLARE_PCI_UNMAP_LEN(LEN_NAME)		__u32 LEN_NAME;
+#define pci_unmap_addr(PTR, ADDR_NAME)		((PTR)->ADDR_NAME)
+#define pci_unmap_addr_set(PTR, ADDR_NAME, VAL)	(((PTR)->ADDR_NAME) = (VAL))
+#define pci_unmap_len(PTR, LEN_NAME)		((PTR)->LEN_NAME)
+#define pci_unmap_len_set(PTR, LEN_NAME, VAL)	(((PTR)->LEN_NAME) = (VAL))
+
+#ifdef CONFIG_PCI
+static inline void pci_dma_burst_advice(struct pci_dev *pdev,
+					enum pci_dma_burst_strategy *strat,
+					unsigned long *strategy_parameter)
+{
+	*strat = PCI_DMA_BURST_INFINITY;
+	*strategy_parameter = ~0UL;
+}
+#endif
+
+#define HAVE_PCI_MMAP
+extern int pci_mmap_page_range(struct pci_dev *dev, struct vm_area_struct *vma,
+                               enum pci_mmap_state mmap_state, int write_combine);
+
+extern void
+pcibios_resource_to_bus(struct pci_dev *dev, struct pci_bus_region *region,
+			 struct resource *res);
+
+extern void
+pcibios_bus_to_resource(struct pci_dev *dev, struct resource *res,
+			struct pci_bus_region *region);
+
+static inline struct resource *
+pcibios_select_root(struct pci_dev *pdev, struct resource *res)
+{
+	struct resource *root = NULL;
+
+	if (res->flags & IORESOURCE_IO)
+		root = &ioport_resource;
+	if (res->flags & IORESOURCE_MEM)
+		root = &iomem_resource;
+
+	return root;
+}
+
+/*
+ * Dummy implementation; always return 0.
+ */
+static inline int pci_get_legacy_ide_irq(struct pci_dev *dev, int channel)
+{
+	return 0;
+}
+
+#endif /* __KERNEL__ */
+ 
+#endif
diff --git a/include/asm-arm/percpu.h b/arch/arm/include/asm/percpu.h
index b4e32d8ec072..b4e32d8ec072 100644
--- a/include/asm-arm/percpu.h
+++ b/arch/arm/include/asm/percpu.h
diff --git a/arch/arm/include/asm/pgalloc.h b/arch/arm/include/asm/pgalloc.h
new file mode 100644
index 000000000000..3dcd64bf1824
--- /dev/null
+++ b/arch/arm/include/asm/pgalloc.h
@@ -0,0 +1,136 @@
+/*
+ *  arch/arm/include/asm/pgalloc.h
+ *
+ *  Copyright (C) 2000-2001 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef _ASMARM_PGALLOC_H
+#define _ASMARM_PGALLOC_H
+
+#include <asm/domain.h>
+#include <asm/pgtable-hwdef.h>
+#include <asm/processor.h>
+#include <asm/cacheflush.h>
+#include <asm/tlbflush.h>
+
+#define check_pgt_cache()		do { } while (0)
+
+#ifdef CONFIG_MMU
+
+#define _PAGE_USER_TABLE	(PMD_TYPE_TABLE | PMD_BIT4 | PMD_DOMAIN(DOMAIN_USER))
+#define _PAGE_KERNEL_TABLE	(PMD_TYPE_TABLE | PMD_BIT4 | PMD_DOMAIN(DOMAIN_KERNEL))
+
+/*
+ * Since we have only two-level page tables, these are trivial
+ */
+#define pmd_alloc_one(mm,addr)		({ BUG(); ((pmd_t *)2); })
+#define pmd_free(mm, pmd)		do { } while (0)
+#define pgd_populate(mm,pmd,pte)	BUG()
+
+extern pgd_t *get_pgd_slow(struct mm_struct *mm);
+extern void free_pgd_slow(struct mm_struct *mm, pgd_t *pgd);
+
+#define pgd_alloc(mm)			get_pgd_slow(mm)
+#define pgd_free(mm, pgd)		free_pgd_slow(mm, pgd)
+
+/*
+ * Allocate one PTE table.
+ *
+ * This actually allocates two hardware PTE tables, but we wrap this up
+ * into one table thus:
+ *
+ *  +------------+
+ *  |  h/w pt 0  |
+ *  +------------+
+ *  |  h/w pt 1  |
+ *  +------------+
+ *  | Linux pt 0 |
+ *  +------------+
+ *  | Linux pt 1 |
+ *  +------------+
+ */
+static inline pte_t *
+pte_alloc_one_kernel(struct mm_struct *mm, unsigned long addr)
+{
+	pte_t *pte;
+
+	pte = (pte_t *)__get_free_page(GFP_KERNEL|__GFP_REPEAT|__GFP_ZERO);
+	if (pte) {
+		clean_dcache_area(pte, sizeof(pte_t) * PTRS_PER_PTE);
+		pte += PTRS_PER_PTE;
+	}
+
+	return pte;
+}
+
+static inline pgtable_t
+pte_alloc_one(struct mm_struct *mm, unsigned long addr)
+{
+	struct page *pte;
+
+	pte = alloc_pages(GFP_KERNEL|__GFP_REPEAT|__GFP_ZERO, 0);
+	if (pte) {
+		void *page = page_address(pte);
+		clean_dcache_area(page, sizeof(pte_t) * PTRS_PER_PTE);
+		pgtable_page_ctor(pte);
+	}
+
+	return pte;
+}
+
+/*
+ * Free one PTE table.
+ */
+static inline void pte_free_kernel(struct mm_struct *mm, pte_t *pte)
+{
+	if (pte) {
+		pte -= PTRS_PER_PTE;
+		free_page((unsigned long)pte);
+	}
+}
+
+static inline void pte_free(struct mm_struct *mm, pgtable_t pte)
+{
+	pgtable_page_dtor(pte);
+	__free_page(pte);
+}
+
+static inline void __pmd_populate(pmd_t *pmdp, unsigned long pmdval)
+{
+	pmdp[0] = __pmd(pmdval);
+	pmdp[1] = __pmd(pmdval + 256 * sizeof(pte_t));
+	flush_pmd_entry(pmdp);
+}
+
+/*
+ * Populate the pmdp entry with a pointer to the pte.  This pmd is part
+ * of the mm address space.
+ *
+ * Ensure that we always set both PMD entries.
+ */
+static inline void
+pmd_populate_kernel(struct mm_struct *mm, pmd_t *pmdp, pte_t *ptep)
+{
+	unsigned long pte_ptr = (unsigned long)ptep;
+
+	/*
+	 * The pmd must be loaded with the physical
+	 * address of the PTE table
+	 */
+	pte_ptr -= PTRS_PER_PTE * sizeof(void *);
+	__pmd_populate(pmdp, __pa(pte_ptr) | _PAGE_KERNEL_TABLE);
+}
+
+static inline void
+pmd_populate(struct mm_struct *mm, pmd_t *pmdp, pgtable_t ptep)
+{
+	__pmd_populate(pmdp, page_to_pfn(ptep) << PAGE_SHIFT | _PAGE_USER_TABLE);
+}
+#define pmd_pgtable(pmd) pmd_page(pmd)
+
+#endif /* CONFIG_MMU */
+
+#endif
diff --git a/include/asm-arm/pgtable-hwdef.h b/arch/arm/include/asm/pgtable-hwdef.h
index f3b5120c99fe..fd1521d5cb9d 100644
--- a/include/asm-arm/pgtable-hwdef.h
+++ b/arch/arm/include/asm/pgtable-hwdef.h
@@ -1,5 +1,5 @@
 /*
- *  linux/include/asm-arm/pgtable-hwdef.h
+ *  arch/arm/include/asm/pgtable-hwdef.h
  *
  *  Copyright (C) 1995-2002 Russell King
  *
diff --git a/include/asm-arm/pgtable-nommu.h b/arch/arm/include/asm/pgtable-nommu.h
index 386fcc10a973..b011f2e939aa 100644
--- a/include/asm-arm/pgtable-nommu.h
+++ b/arch/arm/include/asm/pgtable-nommu.h
@@ -1,5 +1,5 @@
 /*
- *  linux/include/asm-arm/pgtable-nommu.h
+ *  arch/arm/include/asm/pgtable-nommu.h
  *
  *  Copyright (C) 1995-2002 Russell King
  *  Copyright (C) 2004  Hyok S. Choi
diff --git a/arch/arm/include/asm/pgtable.h b/arch/arm/include/asm/pgtable.h
new file mode 100644
index 000000000000..8e21ef15bd74
--- /dev/null
+++ b/arch/arm/include/asm/pgtable.h
@@ -0,0 +1,401 @@
+/*
+ *  arch/arm/include/asm/pgtable.h
+ *
+ *  Copyright (C) 1995-2002 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef _ASMARM_PGTABLE_H
+#define _ASMARM_PGTABLE_H
+
+#include <asm-generic/4level-fixup.h>
+#include <asm/proc-fns.h>
+
+#ifndef CONFIG_MMU
+
+#include "pgtable-nommu.h"
+
+#else
+
+#include <asm/memory.h>
+#include <mach/vmalloc.h>
+#include <asm/pgtable-hwdef.h>
+
+/*
+ * Just any arbitrary offset to the start of the vmalloc VM area: the
+ * current 8MB value just means that there will be a 8MB "hole" after the
+ * physical memory until the kernel virtual memory starts.  That means that
+ * any out-of-bounds memory accesses will hopefully be caught.
+ * The vmalloc() routines leaves a hole of 4kB between each vmalloced
+ * area for the same reason. ;)
+ *
+ * Note that platforms may override VMALLOC_START, but they must provide
+ * VMALLOC_END.  VMALLOC_END defines the (exclusive) limit of this space,
+ * which may not overlap IO space.
+ */
+#ifndef VMALLOC_START
+#define VMALLOC_OFFSET		(8*1024*1024)
+#define VMALLOC_START		(((unsigned long)high_memory + VMALLOC_OFFSET) & ~(VMALLOC_OFFSET-1))
+#endif
+
+/*
+ * Hardware-wise, we have a two level page table structure, where the first
+ * level has 4096 entries, and the second level has 256 entries.  Each entry
+ * is one 32-bit word.  Most of the bits in the second level entry are used
+ * by hardware, and there aren't any "accessed" and "dirty" bits.
+ *
+ * Linux on the other hand has a three level page table structure, which can
+ * be wrapped to fit a two level page table structure easily - using the PGD
+ * and PTE only.  However, Linux also expects one "PTE" table per page, and
+ * at least a "dirty" bit.
+ *
+ * Therefore, we tweak the implementation slightly - we tell Linux that we
+ * have 2048 entries in the first level, each of which is 8 bytes (iow, two
+ * hardware pointers to the second level.)  The second level contains two
+ * hardware PTE tables arranged contiguously, followed by Linux versions
+ * which contain the state information Linux needs.  We, therefore, end up
+ * with 512 entries in the "PTE" level.
+ *
+ * This leads to the page tables having the following layout:
+ *
+ *    pgd             pte
+ * |        |
+ * +--------+ +0
+ * |        |-----> +------------+ +0
+ * +- - - - + +4    |  h/w pt 0  |
+ * |        |-----> +------------+ +1024
+ * +--------+ +8    |  h/w pt 1  |
+ * |        |       +------------+ +2048
+ * +- - - - +       | Linux pt 0 |
+ * |        |       +------------+ +3072
+ * +--------+       | Linux pt 1 |
+ * |        |       +------------+ +4096
+ *
+ * See L_PTE_xxx below for definitions of bits in the "Linux pt", and
+ * PTE_xxx for definitions of bits appearing in the "h/w pt".
+ *
+ * PMD_xxx definitions refer to bits in the first level page table.
+ *
+ * The "dirty" bit is emulated by only granting hardware write permission
+ * iff the page is marked "writable" and "dirty" in the Linux PTE.  This
+ * means that a write to a clean page will cause a permission fault, and
+ * the Linux MM layer will mark the page dirty via handle_pte_fault().
+ * For the hardware to notice the permission change, the TLB entry must
+ * be flushed, and ptep_set_access_flags() does that for us.
+ *
+ * The "accessed" or "young" bit is emulated by a similar method; we only
+ * allow accesses to the page if the "young" bit is set.  Accesses to the
+ * page will cause a fault, and handle_pte_fault() will set the young bit
+ * for us as long as the page is marked present in the corresponding Linux
+ * PTE entry.  Again, ptep_set_access_flags() will ensure that the TLB is
+ * up to date.
+ *
+ * However, when the "young" bit is cleared, we deny access to the page
+ * by clearing the hardware PTE.  Currently Linux does not flush the TLB
+ * for us in this case, which means the TLB will retain the transation
+ * until either the TLB entry is evicted under pressure, or a context
+ * switch which changes the user space mapping occurs.
+ */
+#define PTRS_PER_PTE		512
+#define PTRS_PER_PMD		1
+#define PTRS_PER_PGD		2048
+
+/*
+ * PMD_SHIFT determines the size of the area a second-level page table can map
+ * PGDIR_SHIFT determines what a third-level page table entry can map
+ */
+#define PMD_SHIFT		21
+#define PGDIR_SHIFT		21
+
+#define LIBRARY_TEXT_START	0x0c000000
+
+#ifndef __ASSEMBLY__
+extern void __pte_error(const char *file, int line, unsigned long val);
+extern void __pmd_error(const char *file, int line, unsigned long val);
+extern void __pgd_error(const char *file, int line, unsigned long val);
+
+#define pte_ERROR(pte)		__pte_error(__FILE__, __LINE__, pte_val(pte))
+#define pmd_ERROR(pmd)		__pmd_error(__FILE__, __LINE__, pmd_val(pmd))
+#define pgd_ERROR(pgd)		__pgd_error(__FILE__, __LINE__, pgd_val(pgd))
+#endif /* !__ASSEMBLY__ */
+
+#define PMD_SIZE		(1UL << PMD_SHIFT)
+#define PMD_MASK		(~(PMD_SIZE-1))
+#define PGDIR_SIZE		(1UL << PGDIR_SHIFT)
+#define PGDIR_MASK		(~(PGDIR_SIZE-1))
+
+/*
+ * This is the lowest virtual address we can permit any user space
+ * mapping to be mapped at.  This is particularly important for
+ * non-high vector CPUs.
+ */
+#define FIRST_USER_ADDRESS	PAGE_SIZE
+
+#define FIRST_USER_PGD_NR	1
+#define USER_PTRS_PER_PGD	((TASK_SIZE/PGDIR_SIZE) - FIRST_USER_PGD_NR)
+
+/*
+ * section address mask and size definitions.
+ */
+#define SECTION_SHIFT		20
+#define SECTION_SIZE		(1UL << SECTION_SHIFT)
+#define SECTION_MASK		(~(SECTION_SIZE-1))
+
+/*
+ * ARMv6 supersection address mask and size definitions.
+ */
+#define SUPERSECTION_SHIFT	24
+#define SUPERSECTION_SIZE	(1UL << SUPERSECTION_SHIFT)
+#define SUPERSECTION_MASK	(~(SUPERSECTION_SIZE-1))
+
+/*
+ * "Linux" PTE definitions.
+ *
+ * We keep two sets of PTEs - the hardware and the linux version.
+ * This allows greater flexibility in the way we map the Linux bits
+ * onto the hardware tables, and allows us to have YOUNG and DIRTY
+ * bits.
+ *
+ * The PTE table pointer refers to the hardware entries; the "Linux"
+ * entries are stored 1024 bytes below.
+ */
+#define L_PTE_PRESENT		(1 << 0)
+#define L_PTE_FILE		(1 << 1)	/* only when !PRESENT */
+#define L_PTE_YOUNG		(1 << 1)
+#define L_PTE_BUFFERABLE	(1 << 2)	/* matches PTE */
+#define L_PTE_CACHEABLE		(1 << 3)	/* matches PTE */
+#define L_PTE_USER		(1 << 4)
+#define L_PTE_WRITE		(1 << 5)
+#define L_PTE_EXEC		(1 << 6)
+#define L_PTE_DIRTY		(1 << 7)
+#define L_PTE_SHARED		(1 << 10)	/* shared(v6), coherent(xsc3) */
+
+#ifndef __ASSEMBLY__
+
+/*
+ * The pgprot_* and protection_map entries will be fixed up in runtime
+ * to include the cachable and bufferable bits based on memory policy,
+ * as well as any architecture dependent bits like global/ASID and SMP
+ * shared mapping bits.
+ */
+#define _L_PTE_DEFAULT	L_PTE_PRESENT | L_PTE_YOUNG | L_PTE_CACHEABLE | L_PTE_BUFFERABLE
+#define _L_PTE_READ	L_PTE_USER | L_PTE_EXEC
+
+extern pgprot_t		pgprot_user;
+extern pgprot_t		pgprot_kernel;
+
+#define PAGE_NONE	pgprot_user
+#define PAGE_COPY	__pgprot(pgprot_val(pgprot_user) | _L_PTE_READ)
+#define PAGE_SHARED	__pgprot(pgprot_val(pgprot_user) | _L_PTE_READ | \
+				 L_PTE_WRITE)
+#define PAGE_READONLY	__pgprot(pgprot_val(pgprot_user) | _L_PTE_READ)
+#define PAGE_KERNEL	pgprot_kernel
+
+#define __PAGE_NONE	__pgprot(_L_PTE_DEFAULT)
+#define __PAGE_COPY	__pgprot(_L_PTE_DEFAULT | _L_PTE_READ)
+#define __PAGE_SHARED	__pgprot(_L_PTE_DEFAULT | _L_PTE_READ | L_PTE_WRITE)
+#define __PAGE_READONLY	__pgprot(_L_PTE_DEFAULT | _L_PTE_READ)
+
+#endif /* __ASSEMBLY__ */
+
+/*
+ * The table below defines the page protection levels that we insert into our
+ * Linux page table version.  These get translated into the best that the
+ * architecture can perform.  Note that on most ARM hardware:
+ *  1) We cannot do execute protection
+ *  2) If we could do execute protection, then read is implied
+ *  3) write implies read permissions
+ */
+#define __P000  __PAGE_NONE
+#define __P001  __PAGE_READONLY
+#define __P010  __PAGE_COPY
+#define __P011  __PAGE_COPY
+#define __P100  __PAGE_READONLY
+#define __P101  __PAGE_READONLY
+#define __P110  __PAGE_COPY
+#define __P111  __PAGE_COPY
+
+#define __S000  __PAGE_NONE
+#define __S001  __PAGE_READONLY
+#define __S010  __PAGE_SHARED
+#define __S011  __PAGE_SHARED
+#define __S100  __PAGE_READONLY
+#define __S101  __PAGE_READONLY
+#define __S110  __PAGE_SHARED
+#define __S111  __PAGE_SHARED
+
+#ifndef __ASSEMBLY__
+/*
+ * ZERO_PAGE is a global shared page that is always zero: used
+ * for zero-mapped memory areas etc..
+ */
+extern struct page *empty_zero_page;
+#define ZERO_PAGE(vaddr)	(empty_zero_page)
+
+#define pte_pfn(pte)		(pte_val(pte) >> PAGE_SHIFT)
+#define pfn_pte(pfn,prot)	(__pte(((pfn) << PAGE_SHIFT) | pgprot_val(prot)))
+
+#define pte_none(pte)		(!pte_val(pte))
+#define pte_clear(mm,addr,ptep)	set_pte_ext(ptep, __pte(0), 0)
+#define pte_page(pte)		(pfn_to_page(pte_pfn(pte)))
+#define pte_offset_kernel(dir,addr)	(pmd_page_vaddr(*(dir)) + __pte_index(addr))
+#define pte_offset_map(dir,addr)	(pmd_page_vaddr(*(dir)) + __pte_index(addr))
+#define pte_offset_map_nested(dir,addr)	(pmd_page_vaddr(*(dir)) + __pte_index(addr))
+#define pte_unmap(pte)		do { } while (0)
+#define pte_unmap_nested(pte)	do { } while (0)
+
+#define set_pte_ext(ptep,pte,ext) cpu_set_pte_ext(ptep,pte,ext)
+
+#define set_pte_at(mm,addr,ptep,pteval) do { \
+	set_pte_ext(ptep, pteval, (addr) >= TASK_SIZE ? 0 : PTE_EXT_NG); \
+ } while (0)
+
+/*
+ * The following only work if pte_present() is true.
+ * Undefined behaviour if not..
+ */
+#define pte_present(pte)	(pte_val(pte) & L_PTE_PRESENT)
+#define pte_write(pte)		(pte_val(pte) & L_PTE_WRITE)
+#define pte_dirty(pte)		(pte_val(pte) & L_PTE_DIRTY)
+#define pte_young(pte)		(pte_val(pte) & L_PTE_YOUNG)
+#define pte_special(pte)	(0)
+
+/*
+ * The following only works if pte_present() is not true.
+ */
+#define pte_file(pte)		(pte_val(pte) & L_PTE_FILE)
+#define pte_to_pgoff(x)		(pte_val(x) >> 2)
+#define pgoff_to_pte(x)		__pte(((x) << 2) | L_PTE_FILE)
+
+#define PTE_FILE_MAX_BITS	30
+
+#define PTE_BIT_FUNC(fn,op) \
+static inline pte_t pte_##fn(pte_t pte) { pte_val(pte) op; return pte; }
+
+PTE_BIT_FUNC(wrprotect, &= ~L_PTE_WRITE);
+PTE_BIT_FUNC(mkwrite,   |= L_PTE_WRITE);
+PTE_BIT_FUNC(mkclean,   &= ~L_PTE_DIRTY);
+PTE_BIT_FUNC(mkdirty,   |= L_PTE_DIRTY);
+PTE_BIT_FUNC(mkold,     &= ~L_PTE_YOUNG);
+PTE_BIT_FUNC(mkyoung,   |= L_PTE_YOUNG);
+
+static inline pte_t pte_mkspecial(pte_t pte) { return pte; }
+
+/*
+ * Mark the prot value as uncacheable and unbufferable.
+ */
+#define pgprot_noncached(prot)	__pgprot(pgprot_val(prot) & ~(L_PTE_CACHEABLE | L_PTE_BUFFERABLE))
+#define pgprot_writecombine(prot) __pgprot(pgprot_val(prot) & ~L_PTE_CACHEABLE)
+
+#define pmd_none(pmd)		(!pmd_val(pmd))
+#define pmd_present(pmd)	(pmd_val(pmd))
+#define pmd_bad(pmd)		(pmd_val(pmd) & 2)
+
+#define copy_pmd(pmdpd,pmdps)		\
+	do {				\
+		pmdpd[0] = pmdps[0];	\
+		pmdpd[1] = pmdps[1];	\
+		flush_pmd_entry(pmdpd);	\
+	} while (0)
+
+#define pmd_clear(pmdp)			\
+	do {				\
+		pmdp[0] = __pmd(0);	\
+		pmdp[1] = __pmd(0);	\
+		clean_pmd_entry(pmdp);	\
+	} while (0)
+
+static inline pte_t *pmd_page_vaddr(pmd_t pmd)
+{
+	unsigned long ptr;
+
+	ptr = pmd_val(pmd) & ~(PTRS_PER_PTE * sizeof(void *) - 1);
+	ptr += PTRS_PER_PTE * sizeof(void *);
+
+	return __va(ptr);
+}
+
+#define pmd_page(pmd) virt_to_page(__va(pmd_val(pmd)))
+
+/*
+ * Permanent address of a page. We never have highmem, so this is trivial.
+ */
+#define pages_to_mb(x)		((x) >> (20 - PAGE_SHIFT))
+
+/*
+ * Conversion functions: convert a page and protection to a page entry,
+ * and a page entry and page directory to the page they refer to.
+ */
+#define mk_pte(page,prot)	pfn_pte(page_to_pfn(page),prot)
+
+/*
+ * The "pgd_xxx()" functions here are trivial for a folded two-level
+ * setup: the pgd is never bad, and a pmd always exists (as it's folded
+ * into the pgd entry)
+ */
+#define pgd_none(pgd)		(0)
+#define pgd_bad(pgd)		(0)
+#define pgd_present(pgd)	(1)
+#define pgd_clear(pgdp)		do { } while (0)
+#define set_pgd(pgd,pgdp)	do { } while (0)
+
+/* to find an entry in a page-table-directory */
+#define pgd_index(addr)		((addr) >> PGDIR_SHIFT)
+
+#define pgd_offset(mm, addr)	((mm)->pgd+pgd_index(addr))
+
+/* to find an entry in a kernel page-table-directory */
+#define pgd_offset_k(addr)	pgd_offset(&init_mm, addr)
+
+/* Find an entry in the second-level page table.. */
+#define pmd_offset(dir, addr)	((pmd_t *)(dir))
+
+/* Find an entry in the third-level page table.. */
+#define __pte_index(addr)	(((addr) >> PAGE_SHIFT) & (PTRS_PER_PTE - 1))
+
+static inline pte_t pte_modify(pte_t pte, pgprot_t newprot)
+{
+	const unsigned long mask = L_PTE_EXEC | L_PTE_WRITE | L_PTE_USER;
+	pte_val(pte) = (pte_val(pte) & ~mask) | (pgprot_val(newprot) & mask);
+	return pte;
+}
+
+extern pgd_t swapper_pg_dir[PTRS_PER_PGD];
+
+/* Encode and decode a swap entry.
+ *
+ * We support up to 32GB of swap on 4k machines
+ */
+#define __swp_type(x)		(((x).val >> 2) & 0x7f)
+#define __swp_offset(x)		((x).val >> 9)
+#define __swp_entry(type,offset) ((swp_entry_t) { ((type) << 2) | ((offset) << 9) })
+#define __pte_to_swp_entry(pte)	((swp_entry_t) { pte_val(pte) })
+#define __swp_entry_to_pte(swp)	((pte_t) { (swp).val })
+
+/* Needs to be defined here and not in linux/mm.h, as it is arch dependent */
+/* FIXME: this is not correct */
+#define kern_addr_valid(addr)	(1)
+
+#include <asm-generic/pgtable.h>
+
+/*
+ * We provide our own arch_get_unmapped_area to cope with VIPT caches.
+ */
+#define HAVE_ARCH_UNMAPPED_AREA
+
+/*
+ * remap a physical page `pfn' of size `size' with page protection `prot'
+ * into virtual address `from'
+ */
+#define io_remap_pfn_range(vma,from,pfn,size,prot) \
+		remap_pfn_range(vma, from, pfn, size, prot)
+
+#define pgtable_cache_init() do { } while (0)
+
+#endif /* !__ASSEMBLY__ */
+
+#endif /* CONFIG_MMU */
+
+#endif /* _ASMARM_PGTABLE_H */
diff --git a/include/asm-arm/poll.h b/arch/arm/include/asm/poll.h
index c98509d3149e..c98509d3149e 100644
--- a/include/asm-arm/poll.h
+++ b/arch/arm/include/asm/poll.h
diff --git a/arch/arm/include/asm/posix_types.h b/arch/arm/include/asm/posix_types.h
new file mode 100644
index 000000000000..2446d23bfdbf
--- /dev/null
+++ b/arch/arm/include/asm/posix_types.h
@@ -0,0 +1,77 @@
+/*
+ *  arch/arm/include/asm/posix_types.h
+ *
+ *  Copyright (C) 1996-1998 Russell King.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ *  Changelog:
+ *   27-06-1996	RMK	Created
+ */
+#ifndef __ARCH_ARM_POSIX_TYPES_H
+#define __ARCH_ARM_POSIX_TYPES_H
+
+/*
+ * This file is generally used by user-level software, so you need to
+ * be a little careful about namespace pollution etc.  Also, we cannot
+ * assume GCC is being used.
+ */
+
+typedef unsigned long		__kernel_ino_t;
+typedef unsigned short		__kernel_mode_t;
+typedef unsigned short		__kernel_nlink_t;
+typedef long			__kernel_off_t;
+typedef int			__kernel_pid_t;
+typedef unsigned short		__kernel_ipc_pid_t;
+typedef unsigned short		__kernel_uid_t;
+typedef unsigned short		__kernel_gid_t;
+typedef unsigned int		__kernel_size_t;
+typedef int			__kernel_ssize_t;
+typedef int			__kernel_ptrdiff_t;
+typedef long			__kernel_time_t;
+typedef long			__kernel_suseconds_t;
+typedef long			__kernel_clock_t;
+typedef int			__kernel_timer_t;
+typedef int			__kernel_clockid_t;
+typedef int			__kernel_daddr_t;
+typedef char *			__kernel_caddr_t;
+typedef unsigned short		__kernel_uid16_t;
+typedef unsigned short		__kernel_gid16_t;
+typedef unsigned int		__kernel_uid32_t;
+typedef unsigned int		__kernel_gid32_t;
+
+typedef unsigned short		__kernel_old_uid_t;
+typedef unsigned short		__kernel_old_gid_t;
+typedef unsigned short		__kernel_old_dev_t;
+
+#ifdef __GNUC__
+typedef long long		__kernel_loff_t;
+#endif
+
+typedef struct {
+	int	val[2];
+} __kernel_fsid_t;
+
+#if defined(__KERNEL__)
+
+#undef	__FD_SET
+#define __FD_SET(fd, fdsetp) \
+		(((fd_set *)(fdsetp))->fds_bits[(fd) >> 5] |= (1<<((fd) & 31)))
+
+#undef	__FD_CLR
+#define __FD_CLR(fd, fdsetp) \
+		(((fd_set *)(fdsetp))->fds_bits[(fd) >> 5] &= ~(1<<((fd) & 31)))
+
+#undef	__FD_ISSET
+#define __FD_ISSET(fd, fdsetp) \
+		((((fd_set *)(fdsetp))->fds_bits[(fd) >> 5] & (1<<((fd) & 31))) != 0)
+
+#undef	__FD_ZERO
+#define __FD_ZERO(fdsetp) \
+		(memset (fdsetp, 0, sizeof (*(fd_set *)(fdsetp))))
+
+#endif
+
+#endif
diff --git a/include/asm-arm/proc-fns.h b/arch/arm/include/asm/proc-fns.h
index 75ec760f4c74..db80203b68e0 100644
--- a/include/asm-arm/proc-fns.h
+++ b/arch/arm/include/asm/proc-fns.h
@@ -1,5 +1,5 @@
 /*
- *  linux/include/asm-arm/proc-fns.h
+ *  arch/arm/include/asm/proc-fns.h
  *
  *  Copyright (C) 1997-1999 Russell King
  *  Copyright (C) 2000 Deep Blue Solutions Ltd
diff --git a/arch/arm/include/asm/processor.h b/arch/arm/include/asm/processor.h
new file mode 100644
index 000000000000..517a4d6ffc74
--- /dev/null
+++ b/arch/arm/include/asm/processor.h
@@ -0,0 +1,131 @@
+/*
+ *  arch/arm/include/asm/processor.h
+ *
+ *  Copyright (C) 1995-1999 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARM_PROCESSOR_H
+#define __ASM_ARM_PROCESSOR_H
+
+/*
+ * Default implementation of macro that returns current
+ * instruction pointer ("program counter").
+ */
+#define current_text_addr() ({ __label__ _l; _l: &&_l;})
+
+#ifdef __KERNEL__
+
+#include <asm/ptrace.h>
+#include <asm/types.h>
+
+#ifdef __KERNEL__
+#define STACK_TOP	((current->personality == PER_LINUX_32BIT) ? \
+			 TASK_SIZE : TASK_SIZE_26)
+#define STACK_TOP_MAX	TASK_SIZE
+#endif
+
+union debug_insn {
+	u32	arm;
+	u16	thumb;
+};
+
+struct debug_entry {
+	u32			address;
+	union debug_insn	insn;
+};
+
+struct debug_info {
+	int			nsaved;
+	struct debug_entry	bp[2];
+};
+
+struct thread_struct {
+							/* fault info	  */
+	unsigned long		address;
+	unsigned long		trap_no;
+	unsigned long		error_code;
+							/* debugging	  */
+	struct debug_info	debug;
+};
+
+#define INIT_THREAD  {	}
+
+#ifdef CONFIG_MMU
+#define nommu_start_thread(regs) do { } while (0)
+#else
+#define nommu_start_thread(regs) regs->ARM_r10 = current->mm->start_data
+#endif
+
+#define start_thread(regs,pc,sp)					\
+({									\
+	unsigned long *stack = (unsigned long *)sp;			\
+	set_fs(USER_DS);						\
+	memzero(regs->uregs, sizeof(regs->uregs));			\
+	if (current->personality & ADDR_LIMIT_32BIT)			\
+		regs->ARM_cpsr = USR_MODE;				\
+	else								\
+		regs->ARM_cpsr = USR26_MODE;				\
+	if (elf_hwcap & HWCAP_THUMB && pc & 1)				\
+		regs->ARM_cpsr |= PSR_T_BIT;				\
+	regs->ARM_pc = pc & ~1;		/* pc */			\
+	regs->ARM_sp = sp;		/* sp */			\
+	regs->ARM_r2 = stack[2];	/* r2 (envp) */			\
+	regs->ARM_r1 = stack[1];	/* r1 (argv) */			\
+	regs->ARM_r0 = stack[0];	/* r0 (argc) */			\
+	nommu_start_thread(regs);					\
+})
+
+/* Forward declaration, a strange C thing */
+struct task_struct;
+
+/* Free all resources held by a thread. */
+extern void release_thread(struct task_struct *);
+
+/* Prepare to copy thread state - unlazy all lazy status */
+#define prepare_to_copy(tsk)	do { } while (0)
+
+unsigned long get_wchan(struct task_struct *p);
+
+#define cpu_relax()			barrier()
+
+/*
+ * Create a new kernel thread
+ */
+extern int kernel_thread(int (*fn)(void *), void *arg, unsigned long flags);
+
+#define task_pt_regs(p) \
+	((struct pt_regs *)(THREAD_START_SP + task_stack_page(p)) - 1)
+
+#define KSTK_EIP(tsk)	task_pt_regs(tsk)->ARM_pc
+#define KSTK_ESP(tsk)	task_pt_regs(tsk)->ARM_sp
+
+/*
+ * Prefetching support - only ARMv5.
+ */
+#if __LINUX_ARM_ARCH__ >= 5
+
+#define ARCH_HAS_PREFETCH
+static inline void prefetch(const void *ptr)
+{
+	__asm__ __volatile__(
+		"pld\t%a0"
+		:
+		: "p" (ptr)
+		: "cc");
+}
+
+#define ARCH_HAS_PREFETCHW
+#define prefetchw(ptr)	prefetch(ptr)
+
+#define ARCH_HAS_SPINLOCK_PREFETCH
+#define spin_lock_prefetch(x) do { } while (0)
+
+#endif
+
+#endif
+
+#endif /* __ASM_ARM_PROCESSOR_H */
diff --git a/include/asm-arm/procinfo.h b/arch/arm/include/asm/procinfo.h
index 4d3c685075e0..ca52e584ef74 100644
--- a/include/asm-arm/procinfo.h
+++ b/arch/arm/include/asm/procinfo.h
@@ -1,5 +1,5 @@
 /*
- *  linux/include/asm-arm/procinfo.h
+ *  arch/arm/include/asm/procinfo.h
  *
  *  Copyright (C) 1996-1999 Russell King
  *
diff --git a/arch/arm/include/asm/ptrace.h b/arch/arm/include/asm/ptrace.h
new file mode 100644
index 000000000000..b415c0e85458
--- /dev/null
+++ b/arch/arm/include/asm/ptrace.h
@@ -0,0 +1,162 @@
+/*
+ *  arch/arm/include/asm/ptrace.h
+ *
+ *  Copyright (C) 1996-2003 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __ASM_ARM_PTRACE_H
+#define __ASM_ARM_PTRACE_H
+
+#include <asm/hwcap.h>
+
+#define PTRACE_GETREGS		12
+#define PTRACE_SETREGS		13
+#define PTRACE_GETFPREGS	14
+#define PTRACE_SETFPREGS	15
+/* PTRACE_ATTACH is 16 */
+/* PTRACE_DETACH is 17 */
+#define PTRACE_GETWMMXREGS	18
+#define PTRACE_SETWMMXREGS	19
+/* 20 is unused */
+#define PTRACE_OLDSETOPTIONS	21
+#define PTRACE_GET_THREAD_AREA	22
+#define PTRACE_SET_SYSCALL	23
+/* PTRACE_SYSCALL is 24 */
+#define PTRACE_GETCRUNCHREGS	25
+#define PTRACE_SETCRUNCHREGS	26
+
+/*
+ * PSR bits
+ */
+#define USR26_MODE	0x00000000
+#define FIQ26_MODE	0x00000001
+#define IRQ26_MODE	0x00000002
+#define SVC26_MODE	0x00000003
+#define USR_MODE	0x00000010
+#define FIQ_MODE	0x00000011
+#define IRQ_MODE	0x00000012
+#define SVC_MODE	0x00000013
+#define ABT_MODE	0x00000017
+#define UND_MODE	0x0000001b
+#define SYSTEM_MODE	0x0000001f
+#define MODE32_BIT	0x00000010
+#define MODE_MASK	0x0000001f
+#define PSR_T_BIT	0x00000020
+#define PSR_F_BIT	0x00000040
+#define PSR_I_BIT	0x00000080
+#define PSR_A_BIT	0x00000100
+#define PSR_J_BIT	0x01000000
+#define PSR_Q_BIT	0x08000000
+#define PSR_V_BIT	0x10000000
+#define PSR_C_BIT	0x20000000
+#define PSR_Z_BIT	0x40000000
+#define PSR_N_BIT	0x80000000
+#define PCMASK		0
+
+/*
+ * Groups of PSR bits
+ */
+#define PSR_f		0xff000000	/* Flags		*/
+#define PSR_s		0x00ff0000	/* Status		*/
+#define PSR_x		0x0000ff00	/* Extension		*/
+#define PSR_c		0x000000ff	/* Control		*/
+
+#ifndef __ASSEMBLY__
+
+/*
+ * This struct defines the way the registers are stored on the
+ * stack during a system call.  Note that sizeof(struct pt_regs)
+ * has to be a multiple of 8.
+ */
+struct pt_regs {
+	long uregs[18];
+};
+
+#define ARM_cpsr	uregs[16]
+#define ARM_pc		uregs[15]
+#define ARM_lr		uregs[14]
+#define ARM_sp		uregs[13]
+#define ARM_ip		uregs[12]
+#define ARM_fp		uregs[11]
+#define ARM_r10		uregs[10]
+#define ARM_r9		uregs[9]
+#define ARM_r8		uregs[8]
+#define ARM_r7		uregs[7]
+#define ARM_r6		uregs[6]
+#define ARM_r5		uregs[5]
+#define ARM_r4		uregs[4]
+#define ARM_r3		uregs[3]
+#define ARM_r2		uregs[2]
+#define ARM_r1		uregs[1]
+#define ARM_r0		uregs[0]
+#define ARM_ORIG_r0	uregs[17]
+
+#ifdef __KERNEL__
+
+#define user_mode(regs)	\
+	(((regs)->ARM_cpsr & 0xf) == 0)
+
+#ifdef CONFIG_ARM_THUMB
+#define thumb_mode(regs) \
+	(((regs)->ARM_cpsr & PSR_T_BIT))
+#else
+#define thumb_mode(regs) (0)
+#endif
+
+#define isa_mode(regs) \
+	((((regs)->ARM_cpsr & PSR_J_BIT) >> 23) | \
+	 (((regs)->ARM_cpsr & PSR_T_BIT) >> 5))
+
+#define processor_mode(regs) \
+	((regs)->ARM_cpsr & MODE_MASK)
+
+#define interrupts_enabled(regs) \
+	(!((regs)->ARM_cpsr & PSR_I_BIT))
+
+#define fast_interrupts_enabled(regs) \
+	(!((regs)->ARM_cpsr & PSR_F_BIT))
+
+/* Are the current registers suitable for user mode?
+ * (used to maintain security in signal handlers)
+ */
+static inline int valid_user_regs(struct pt_regs *regs)
+{
+	if (user_mode(regs) && (regs->ARM_cpsr & PSR_I_BIT) == 0) {
+		regs->ARM_cpsr &= ~(PSR_F_BIT | PSR_A_BIT);
+		return 1;
+	}
+
+	/*
+	 * Force CPSR to something logical...
+	 */
+	regs->ARM_cpsr &= PSR_f | PSR_s | (PSR_x & ~PSR_A_BIT) | PSR_T_BIT | MODE32_BIT;
+	if (!(elf_hwcap & HWCAP_26BIT))
+		regs->ARM_cpsr |= USR_MODE;
+
+	return 0;
+}
+
+#define pc_pointer(v) \
+	((v) & ~PCMASK)
+
+#define instruction_pointer(regs) \
+	(pc_pointer((regs)->ARM_pc))
+
+#ifdef CONFIG_SMP
+extern unsigned long profile_pc(struct pt_regs *regs);
+#else
+#define profile_pc(regs) instruction_pointer(regs)
+#endif
+
+#define predicate(x)		((x) & 0xf0000000)
+#define PREDICATE_ALWAYS	0xe0000000
+
+#endif /* __KERNEL__ */
+
+#endif /* __ASSEMBLY__ */
+
+#endif
+
diff --git a/include/asm-arm/resource.h b/arch/arm/include/asm/resource.h
index 734b581b5b6a..734b581b5b6a 100644
--- a/include/asm-arm/resource.h
+++ b/arch/arm/include/asm/resource.h
diff --git a/include/asm-arm/scatterlist.h b/arch/arm/include/asm/scatterlist.h
index ca0a37d03400..ca0a37d03400 100644
--- a/include/asm-arm/scatterlist.h
+++ b/arch/arm/include/asm/scatterlist.h
diff --git a/include/asm-arm/sections.h b/arch/arm/include/asm/sections.h
index 2b8c5160388f..2b8c5160388f 100644
--- a/include/asm-arm/sections.h
+++ b/arch/arm/include/asm/sections.h
diff --git a/include/asm-arm/segment.h b/arch/arm/include/asm/segment.h
index 9e24c21f6304..9e24c21f6304 100644
--- a/include/asm-arm/segment.h
+++ b/arch/arm/include/asm/segment.h
diff --git a/include/asm-arm/sembuf.h b/arch/arm/include/asm/sembuf.h
index 1c0283954289..1c0283954289 100644
--- a/include/asm-arm/sembuf.h
+++ b/arch/arm/include/asm/sembuf.h
diff --git a/arch/arm/include/asm/serial.h b/arch/arm/include/asm/serial.h
new file mode 100644
index 000000000000..ebb049091e26
--- /dev/null
+++ b/arch/arm/include/asm/serial.h
@@ -0,0 +1,19 @@
+/*
+ *  arch/arm/include/asm/serial.h
+ *
+ *  Copyright (C) 1996 Russell King.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ *  Changelog:
+ *   15-10-1996	RMK	Created
+ */
+
+#ifndef __ASM_SERIAL_H
+#define __ASM_SERIAL_H
+
+#define BASE_BAUD	(1843200 / 16)
+
+#endif
diff --git a/include/asm-arm/setup.h b/arch/arm/include/asm/setup.h
index 7bbf105463f1..7bbf105463f1 100644
--- a/include/asm-arm/setup.h
+++ b/arch/arm/include/asm/setup.h
diff --git a/include/asm-arm/shmbuf.h b/arch/arm/include/asm/shmbuf.h
index 2e5c67ba1c97..2e5c67ba1c97 100644
--- a/include/asm-arm/shmbuf.h
+++ b/arch/arm/include/asm/shmbuf.h
diff --git a/include/asm-arm/shmparam.h b/arch/arm/include/asm/shmparam.h
index a5223b3a9bf9..a5223b3a9bf9 100644
--- a/include/asm-arm/shmparam.h
+++ b/arch/arm/include/asm/shmparam.h
diff --git a/include/asm-arm/sigcontext.h b/arch/arm/include/asm/sigcontext.h
index fc0b80b6a6fc..fc0b80b6a6fc 100644
--- a/include/asm-arm/sigcontext.h
+++ b/arch/arm/include/asm/sigcontext.h
diff --git a/include/asm-arm/siginfo.h b/arch/arm/include/asm/siginfo.h
index 5e21852e6039..5e21852e6039 100644
--- a/include/asm-arm/siginfo.h
+++ b/arch/arm/include/asm/siginfo.h
diff --git a/include/asm-arm/signal.h b/arch/arm/include/asm/signal.h
index d0fb487aba4f..d0fb487aba4f 100644
--- a/include/asm-arm/signal.h
+++ b/arch/arm/include/asm/signal.h
diff --git a/include/asm-arm/sizes.h b/arch/arm/include/asm/sizes.h
index 503843db1565..503843db1565 100644
--- a/include/asm-arm/sizes.h
+++ b/arch/arm/include/asm/sizes.h
diff --git a/arch/arm/include/asm/smp.h b/arch/arm/include/asm/smp.h
new file mode 100644
index 000000000000..727b5c042e52
--- /dev/null
+++ b/arch/arm/include/asm/smp.h
@@ -0,0 +1,147 @@
+/*
+ *  arch/arm/include/asm/smp.h
+ *
+ *  Copyright (C) 2004-2005 ARM Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __ASM_ARM_SMP_H
+#define __ASM_ARM_SMP_H
+
+#include <linux/threads.h>
+#include <linux/cpumask.h>
+#include <linux/thread_info.h>
+
+#include <mach/smp.h>
+
+#ifndef CONFIG_SMP
+# error "<asm/smp.h> included in non-SMP build"
+#endif
+
+#define raw_smp_processor_id() (current_thread_info()->cpu)
+
+/*
+ * at the moment, there's not a big penalty for changing CPUs
+ * (the >big< penalty is running SMP in the first place)
+ */
+#define PROC_CHANGE_PENALTY		15
+
+struct seq_file;
+
+/*
+ * generate IPI list text
+ */
+extern void show_ipi_list(struct seq_file *p);
+
+/*
+ * Called from assembly code, this handles an IPI.
+ */
+asmlinkage void do_IPI(struct pt_regs *regs);
+
+/*
+ * Setup the SMP cpu_possible_map
+ */
+extern void smp_init_cpus(void);
+
+/*
+ * Move global data into per-processor storage.
+ */
+extern void smp_store_cpu_info(unsigned int cpuid);
+
+/*
+ * Raise an IPI cross call on CPUs in callmap.
+ */
+extern void smp_cross_call(cpumask_t callmap);
+
+/*
+ * Broadcast a timer interrupt to the other CPUs.
+ */
+extern void smp_send_timer(void);
+
+/*
+ * Broadcast a clock event to other CPUs.
+ */
+extern void smp_timer_broadcast(cpumask_t mask);
+
+/*
+ * Boot a secondary CPU, and assign it the specified idle task.
+ * This also gives us the initial stack to use for this CPU.
+ */
+extern int boot_secondary(unsigned int cpu, struct task_struct *);
+
+/*
+ * Called from platform specific assembly code, this is the
+ * secondary CPU entry point.
+ */
+asmlinkage void secondary_start_kernel(void);
+
+/*
+ * Perform platform specific initialisation of the specified CPU.
+ */
+extern void platform_secondary_init(unsigned int cpu);
+
+/*
+ * Initial data for bringing up a secondary CPU.
+ */
+struct secondary_data {
+	unsigned long pgdir;
+	void *stack;
+};
+extern struct secondary_data secondary_data;
+
+extern int __cpu_disable(void);
+extern int mach_cpu_disable(unsigned int cpu);
+
+extern void __cpu_die(unsigned int cpu);
+extern void cpu_die(void);
+
+extern void platform_cpu_die(unsigned int cpu);
+extern int platform_cpu_kill(unsigned int cpu);
+extern void platform_cpu_enable(unsigned int cpu);
+
+extern void arch_send_call_function_single_ipi(int cpu);
+extern void arch_send_call_function_ipi(cpumask_t mask);
+
+/*
+ * Local timer interrupt handling function (can be IPI'ed).
+ */
+extern void local_timer_interrupt(void);
+
+#ifdef CONFIG_LOCAL_TIMERS
+
+/*
+ * Stop a local timer interrupt.
+ */
+extern void local_timer_stop(unsigned int cpu);
+
+/*
+ * Platform provides this to acknowledge a local timer IRQ
+ */
+extern int local_timer_ack(void);
+
+#else
+
+static inline void local_timer_stop(unsigned int cpu)
+{
+}
+
+#endif
+
+/*
+ * Setup a local timer interrupt for a CPU.
+ */
+extern void local_timer_setup(unsigned int cpu);
+
+/*
+ * show local interrupt info
+ */
+extern void show_local_irqs(struct seq_file *);
+
+/*
+ * Called from assembly, this is the local timer IRQ handler
+ */
+asmlinkage void do_local_timer(struct pt_regs *);
+
+#endif /* ifndef __ASM_ARM_SMP_H */
diff --git a/include/asm-arm/socket.h b/arch/arm/include/asm/socket.h
index 6817be9573a6..6817be9573a6 100644
--- a/include/asm-arm/socket.h
+++ b/arch/arm/include/asm/socket.h
diff --git a/include/asm-arm/sockios.h b/arch/arm/include/asm/sockios.h
index a2588a2512df..a2588a2512df 100644
--- a/include/asm-arm/sockios.h
+++ b/arch/arm/include/asm/sockios.h
diff --git a/include/asm-arm/sparsemem.h b/arch/arm/include/asm/sparsemem.h
index 277158191a0d..277158191a0d 100644
--- a/include/asm-arm/sparsemem.h
+++ b/arch/arm/include/asm/sparsemem.h
diff --git a/include/asm-arm/spinlock.h b/arch/arm/include/asm/spinlock.h
index 2b41ebbfa7ff..2b41ebbfa7ff 100644
--- a/include/asm-arm/spinlock.h
+++ b/arch/arm/include/asm/spinlock.h
diff --git a/include/asm-arm/spinlock_types.h b/arch/arm/include/asm/spinlock_types.h
index 43e83f6d2ee5..43e83f6d2ee5 100644
--- a/include/asm-arm/spinlock_types.h
+++ b/arch/arm/include/asm/spinlock_types.h
diff --git a/include/asm-arm/stat.h b/arch/arm/include/asm/stat.h
index 42c0c13999d5..42c0c13999d5 100644
--- a/include/asm-arm/stat.h
+++ b/arch/arm/include/asm/stat.h
diff --git a/include/asm-arm/statfs.h b/arch/arm/include/asm/statfs.h
index a02e6a8c3d70..a02e6a8c3d70 100644
--- a/include/asm-arm/statfs.h
+++ b/arch/arm/include/asm/statfs.h
diff --git a/include/asm-arm/string.h b/arch/arm/include/asm/string.h
index e50c4a39b699..e50c4a39b699 100644
--- a/include/asm-arm/string.h
+++ b/arch/arm/include/asm/string.h
diff --git a/include/asm-arm/suspend.h b/arch/arm/include/asm/suspend.h
index cf0d0bdee74d..cf0d0bdee74d 100644
--- a/include/asm-arm/suspend.h
+++ b/arch/arm/include/asm/suspend.h
diff --git a/include/asm-arm/system.h b/arch/arm/include/asm/system.h
index 514af792a598..514af792a598 100644
--- a/include/asm-arm/system.h
+++ b/arch/arm/include/asm/system.h
diff --git a/include/asm-arm/termbits.h b/arch/arm/include/asm/termbits.h
index f784d11f40b5..f784d11f40b5 100644
--- a/include/asm-arm/termbits.h
+++ b/arch/arm/include/asm/termbits.h
diff --git a/include/asm-arm/termios.h b/arch/arm/include/asm/termios.h
index 293e3f1bc3f2..293e3f1bc3f2 100644
--- a/include/asm-arm/termios.h
+++ b/arch/arm/include/asm/termios.h
diff --git a/include/asm-arm/therm.h b/arch/arm/include/asm/therm.h
index e51c923ecdf3..f002f0197d78 100644
--- a/include/asm-arm/therm.h
+++ b/arch/arm/include/asm/therm.h
@@ -1,5 +1,5 @@
 /*
- * linux/include/asm-arm/therm.h: Definitions for Dallas Semiconductor
+ * arch/arm/include/asm/therm.h: Definitions for Dallas Semiconductor
  *  DS1620 thermometer driver (as used in the Rebel.com NetWinder)
  */
 #ifndef __ASM_THERM_H
diff --git a/arch/arm/include/asm/thread_info.h b/arch/arm/include/asm/thread_info.h
new file mode 100644
index 000000000000..e56fa48e4ae7
--- /dev/null
+++ b/arch/arm/include/asm/thread_info.h
@@ -0,0 +1,153 @@
+/*
+ *  arch/arm/include/asm/thread_info.h
+ *
+ *  Copyright (C) 2002 Russell King.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __ASM_ARM_THREAD_INFO_H
+#define __ASM_ARM_THREAD_INFO_H
+
+#ifdef __KERNEL__
+
+#include <linux/compiler.h>
+#include <asm/fpstate.h>
+
+#define THREAD_SIZE_ORDER	1
+#define THREAD_SIZE		8192
+#define THREAD_START_SP		(THREAD_SIZE - 8)
+
+#ifndef __ASSEMBLY__
+
+struct task_struct;
+struct exec_domain;
+
+#include <asm/types.h>
+#include <asm/domain.h>
+
+typedef unsigned long mm_segment_t;
+
+struct cpu_context_save {
+	__u32	r4;
+	__u32	r5;
+	__u32	r6;
+	__u32	r7;
+	__u32	r8;
+	__u32	r9;
+	__u32	sl;
+	__u32	fp;
+	__u32	sp;
+	__u32	pc;
+	__u32	extra[2];		/* Xscale 'acc' register, etc */
+};
+
+/*
+ * low level task data that entry.S needs immediate access to.
+ * __switch_to() assumes cpu_context follows immediately after cpu_domain.
+ */
+struct thread_info {
+	unsigned long		flags;		/* low level flags */
+	int			preempt_count;	/* 0 => preemptable, <0 => bug */
+	mm_segment_t		addr_limit;	/* address limit */
+	struct task_struct	*task;		/* main task structure */
+	struct exec_domain	*exec_domain;	/* execution domain */
+	__u32			cpu;		/* cpu */
+	__u32			cpu_domain;	/* cpu domain */
+	struct cpu_context_save	cpu_context;	/* cpu context */
+	__u32			syscall;	/* syscall number */
+	__u8			used_cp[16];	/* thread used copro */
+	unsigned long		tp_value;
+	struct crunch_state	crunchstate;
+	union fp_state		fpstate __attribute__((aligned(8)));
+	union vfp_state		vfpstate;
+#ifdef CONFIG_ARM_THUMBEE
+	unsigned long		thumbee_state;	/* ThumbEE Handler Base register */
+#endif
+	struct restart_block	restart_block;
+};
+
+#define INIT_THREAD_INFO(tsk)						\
+{									\
+	.task		= &tsk,						\
+	.exec_domain	= &default_exec_domain,				\
+	.flags		= 0,						\
+	.preempt_count	= 1,						\
+	.addr_limit	= KERNEL_DS,					\
+	.cpu_domain	= domain_val(DOMAIN_USER, DOMAIN_MANAGER) |	\
+			  domain_val(DOMAIN_KERNEL, DOMAIN_MANAGER) |	\
+			  domain_val(DOMAIN_IO, DOMAIN_CLIENT),		\
+	.restart_block	= {						\
+		.fn	= do_no_restart_syscall,			\
+	},								\
+}
+
+#define init_thread_info	(init_thread_union.thread_info)
+#define init_stack		(init_thread_union.stack)
+
+/*
+ * how to get the thread information struct from C
+ */
+static inline struct thread_info *current_thread_info(void) __attribute_const__;
+
+static inline struct thread_info *current_thread_info(void)
+{
+	register unsigned long sp asm ("sp");
+	return (struct thread_info *)(sp & ~(THREAD_SIZE - 1));
+}
+
+#define thread_saved_pc(tsk)	\
+	((unsigned long)(pc_pointer(task_thread_info(tsk)->cpu_context.pc)))
+#define thread_saved_fp(tsk)	\
+	((unsigned long)(task_thread_info(tsk)->cpu_context.fp))
+
+extern void crunch_task_disable(struct thread_info *);
+extern void crunch_task_copy(struct thread_info *, void *);
+extern void crunch_task_restore(struct thread_info *, void *);
+extern void crunch_task_release(struct thread_info *);
+
+extern void iwmmxt_task_disable(struct thread_info *);
+extern void iwmmxt_task_copy(struct thread_info *, void *);
+extern void iwmmxt_task_restore(struct thread_info *, void *);
+extern void iwmmxt_task_release(struct thread_info *);
+extern void iwmmxt_task_switch(struct thread_info *);
+
+#endif
+
+/*
+ * We use bit 30 of the preempt_count to indicate that kernel
+ * preemption is occurring.  See <asm/hardirq.h>.
+ */
+#define PREEMPT_ACTIVE	0x40000000
+
+/*
+ * thread information flags:
+ *  TIF_SYSCALL_TRACE	- syscall trace active
+ *  TIF_SIGPENDING	- signal pending
+ *  TIF_NEED_RESCHED	- rescheduling necessary
+ *  TIF_USEDFPU		- FPU was used by this task this quantum (SMP)
+ *  TIF_POLLING_NRFLAG	- true if poll_idle() is polling TIF_NEED_RESCHED
+ */
+#define TIF_SIGPENDING		0
+#define TIF_NEED_RESCHED	1
+#define TIF_SYSCALL_TRACE	8
+#define TIF_POLLING_NRFLAG	16
+#define TIF_USING_IWMMXT	17
+#define TIF_MEMDIE		18
+#define TIF_FREEZE		19
+
+#define _TIF_SIGPENDING		(1 << TIF_SIGPENDING)
+#define _TIF_NEED_RESCHED	(1 << TIF_NEED_RESCHED)
+#define _TIF_SYSCALL_TRACE	(1 << TIF_SYSCALL_TRACE)
+#define _TIF_POLLING_NRFLAG	(1 << TIF_POLLING_NRFLAG)
+#define _TIF_USING_IWMMXT	(1 << TIF_USING_IWMMXT)
+#define _TIF_FREEZE		(1 << TIF_FREEZE)
+
+/*
+ * Change these and you break ASM code in entry-common.S
+ */
+#define _TIF_WORK_MASK		0x000000ff
+
+#endif /* __KERNEL__ */
+#endif /* __ASM_ARM_THREAD_INFO_H */
diff --git a/include/asm-arm/thread_notify.h b/arch/arm/include/asm/thread_notify.h
index 8866e5216840..f27379d7f72a 100644
--- a/include/asm-arm/thread_notify.h
+++ b/arch/arm/include/asm/thread_notify.h
@@ -1,5 +1,5 @@
 /*
- *  linux/include/asm-arm/thread_notify.h
+ *  arch/arm/include/asm/thread_notify.h
  *
  *  Copyright (C) 2006 Russell King.
  *
diff --git a/arch/arm/include/asm/timex.h b/arch/arm/include/asm/timex.h
new file mode 100644
index 000000000000..3be8de3adaba
--- /dev/null
+++ b/arch/arm/include/asm/timex.h
@@ -0,0 +1,24 @@
+/*
+ *  arch/arm/include/asm/timex.h
+ *
+ *  Copyright (C) 1997,1998 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ *  Architecture Specific TIME specifications
+ */
+#ifndef _ASMARM_TIMEX_H
+#define _ASMARM_TIMEX_H
+
+#include <mach/timex.h>
+
+typedef unsigned long cycles_t;
+
+static inline cycles_t get_cycles (void)
+{
+	return 0;
+}
+
+#endif
diff --git a/arch/arm/include/asm/tlb.h b/arch/arm/include/asm/tlb.h
new file mode 100644
index 000000000000..857f1dfac794
--- /dev/null
+++ b/arch/arm/include/asm/tlb.h
@@ -0,0 +1,94 @@
+/*
+ *  arch/arm/include/asm/tlb.h
+ *
+ *  Copyright (C) 2002 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ *  Experimentation shows that on a StrongARM, it appears to be faster
+ *  to use the "invalidate whole tlb" rather than "invalidate single
+ *  tlb" for this.
+ *
+ *  This appears true for both the process fork+exit case, as well as
+ *  the munmap-large-area case.
+ */
+#ifndef __ASMARM_TLB_H
+#define __ASMARM_TLB_H
+
+#include <asm/cacheflush.h>
+#include <asm/tlbflush.h>
+
+#ifndef CONFIG_MMU
+
+#include <linux/pagemap.h>
+#include <asm-generic/tlb.h>
+
+#else /* !CONFIG_MMU */
+
+#include <asm/pgalloc.h>
+
+/*
+ * TLB handling.  This allows us to remove pages from the page
+ * tables, and efficiently handle the TLB issues.
+ */
+struct mmu_gather {
+	struct mm_struct	*mm;
+	unsigned int		fullmm;
+};
+
+DECLARE_PER_CPU(struct mmu_gather, mmu_gathers);
+
+static inline struct mmu_gather *
+tlb_gather_mmu(struct mm_struct *mm, unsigned int full_mm_flush)
+{
+	struct mmu_gather *tlb = &get_cpu_var(mmu_gathers);
+
+	tlb->mm = mm;
+	tlb->fullmm = full_mm_flush;
+
+	return tlb;
+}
+
+static inline void
+tlb_finish_mmu(struct mmu_gather *tlb, unsigned long start, unsigned long end)
+{
+	if (tlb->fullmm)
+		flush_tlb_mm(tlb->mm);
+
+	/* keep the page table cache within bounds */
+	check_pgt_cache();
+
+	put_cpu_var(mmu_gathers);
+}
+
+#define tlb_remove_tlb_entry(tlb,ptep,address)	do { } while (0)
+
+/*
+ * In the case of tlb vma handling, we can optimise these away in the
+ * case where we're doing a full MM flush.  When we're doing a munmap,
+ * the vmas are adjusted to only cover the region to be torn down.
+ */
+static inline void
+tlb_start_vma(struct mmu_gather *tlb, struct vm_area_struct *vma)
+{
+	if (!tlb->fullmm)
+		flush_cache_range(vma, vma->vm_start, vma->vm_end);
+}
+
+static inline void
+tlb_end_vma(struct mmu_gather *tlb, struct vm_area_struct *vma)
+{
+	if (!tlb->fullmm)
+		flush_tlb_range(vma, vma->vm_start, vma->vm_end);
+}
+
+#define tlb_remove_page(tlb,page)	free_page_and_swap_cache(page)
+#define pte_free_tlb(tlb, ptep)		pte_free((tlb)->mm, ptep)
+#define pmd_free_tlb(tlb, pmdp)		pmd_free((tlb)->mm, pmdp)
+
+#define tlb_migrate_finish(mm)		do { } while (0)
+
+#endif /* CONFIG_MMU */
+#endif
diff --git a/arch/arm/include/asm/tlbflush.h b/arch/arm/include/asm/tlbflush.h
new file mode 100644
index 000000000000..b543a054a17e
--- /dev/null
+++ b/arch/arm/include/asm/tlbflush.h
@@ -0,0 +1,503 @@
+/*
+ *  arch/arm/include/asm/tlbflush.h
+ *
+ *  Copyright (C) 1999-2003 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef _ASMARM_TLBFLUSH_H
+#define _ASMARM_TLBFLUSH_H
+
+
+#ifndef CONFIG_MMU
+
+#define tlb_flush(tlb)	((void) tlb)
+
+#else /* CONFIG_MMU */
+
+#include <asm/glue.h>
+
+#define TLB_V3_PAGE	(1 << 0)
+#define TLB_V4_U_PAGE	(1 << 1)
+#define TLB_V4_D_PAGE	(1 << 2)
+#define TLB_V4_I_PAGE	(1 << 3)
+#define TLB_V6_U_PAGE	(1 << 4)
+#define TLB_V6_D_PAGE	(1 << 5)
+#define TLB_V6_I_PAGE	(1 << 6)
+
+#define TLB_V3_FULL	(1 << 8)
+#define TLB_V4_U_FULL	(1 << 9)
+#define TLB_V4_D_FULL	(1 << 10)
+#define TLB_V4_I_FULL	(1 << 11)
+#define TLB_V6_U_FULL	(1 << 12)
+#define TLB_V6_D_FULL	(1 << 13)
+#define TLB_V6_I_FULL	(1 << 14)
+
+#define TLB_V6_U_ASID	(1 << 16)
+#define TLB_V6_D_ASID	(1 << 17)
+#define TLB_V6_I_ASID	(1 << 18)
+
+#define TLB_L2CLEAN_FR	(1 << 29)		/* Feroceon */
+#define TLB_DCLEAN	(1 << 30)
+#define TLB_WB		(1 << 31)
+
+/*
+ *	MMU TLB Model
+ *	=============
+ *
+ *	We have the following to choose from:
+ *	  v3    - ARMv3
+ *	  v4    - ARMv4 without write buffer
+ *	  v4wb  - ARMv4 with write buffer without I TLB flush entry instruction
+ *	  v4wbi - ARMv4 with write buffer with I TLB flush entry instruction
+ *	  fr    - Feroceon (v4wbi with non-outer-cacheable page table walks)
+ *	  v6wbi - ARMv6 with write buffer with I TLB flush entry instruction
+ *	  v7wbi - identical to v6wbi
+ */
+#undef _TLB
+#undef MULTI_TLB
+
+#define v3_tlb_flags	(TLB_V3_FULL | TLB_V3_PAGE)
+
+#ifdef CONFIG_CPU_TLB_V3
+# define v3_possible_flags	v3_tlb_flags
+# define v3_always_flags	v3_tlb_flags
+# ifdef _TLB
+#  define MULTI_TLB 1
+# else
+#  define _TLB v3
+# endif
+#else
+# define v3_possible_flags	0
+# define v3_always_flags	(-1UL)
+#endif
+
+#define v4_tlb_flags	(TLB_V4_U_FULL | TLB_V4_U_PAGE)
+
+#ifdef CONFIG_CPU_TLB_V4WT
+# define v4_possible_flags	v4_tlb_flags
+# define v4_always_flags	v4_tlb_flags
+# ifdef _TLB
+#  define MULTI_TLB 1
+# else
+#  define _TLB v4
+# endif
+#else
+# define v4_possible_flags	0
+# define v4_always_flags	(-1UL)
+#endif
+
+#define v4wbi_tlb_flags	(TLB_WB | TLB_DCLEAN | \
+			 TLB_V4_I_FULL | TLB_V4_D_FULL | \
+			 TLB_V4_I_PAGE | TLB_V4_D_PAGE)
+
+#ifdef CONFIG_CPU_TLB_V4WBI
+# define v4wbi_possible_flags	v4wbi_tlb_flags
+# define v4wbi_always_flags	v4wbi_tlb_flags
+# ifdef _TLB
+#  define MULTI_TLB 1
+# else
+#  define _TLB v4wbi
+# endif
+#else
+# define v4wbi_possible_flags	0
+# define v4wbi_always_flags	(-1UL)
+#endif
+
+#define fr_tlb_flags	(TLB_WB | TLB_DCLEAN | TLB_L2CLEAN_FR | \
+			 TLB_V4_I_FULL | TLB_V4_D_FULL | \
+			 TLB_V4_I_PAGE | TLB_V4_D_PAGE)
+
+#ifdef CONFIG_CPU_TLB_FEROCEON
+# define fr_possible_flags	fr_tlb_flags
+# define fr_always_flags	fr_tlb_flags
+# ifdef _TLB
+#  define MULTI_TLB 1
+# else
+#  define _TLB v4wbi
+# endif
+#else
+# define fr_possible_flags	0
+# define fr_always_flags	(-1UL)
+#endif
+
+#define v4wb_tlb_flags	(TLB_WB | TLB_DCLEAN | \
+			 TLB_V4_I_FULL | TLB_V4_D_FULL | \
+			 TLB_V4_D_PAGE)
+
+#ifdef CONFIG_CPU_TLB_V4WB
+# define v4wb_possible_flags	v4wb_tlb_flags
+# define v4wb_always_flags	v4wb_tlb_flags
+# ifdef _TLB
+#  define MULTI_TLB 1
+# else
+#  define _TLB v4wb
+# endif
+#else
+# define v4wb_possible_flags	0
+# define v4wb_always_flags	(-1UL)
+#endif
+
+#define v6wbi_tlb_flags (TLB_WB | TLB_DCLEAN | \
+			 TLB_V6_I_FULL | TLB_V6_D_FULL | \
+			 TLB_V6_I_PAGE | TLB_V6_D_PAGE | \
+			 TLB_V6_I_ASID | TLB_V6_D_ASID)
+
+#ifdef CONFIG_CPU_TLB_V6
+# define v6wbi_possible_flags	v6wbi_tlb_flags
+# define v6wbi_always_flags	v6wbi_tlb_flags
+# ifdef _TLB
+#  define MULTI_TLB 1
+# else
+#  define _TLB v6wbi
+# endif
+#else
+# define v6wbi_possible_flags	0
+# define v6wbi_always_flags	(-1UL)
+#endif
+
+#ifdef CONFIG_CPU_TLB_V7
+# define v7wbi_possible_flags	v6wbi_tlb_flags
+# define v7wbi_always_flags	v6wbi_tlb_flags
+# ifdef _TLB
+#  define MULTI_TLB 1
+# else
+#  define _TLB v7wbi
+# endif
+#else
+# define v7wbi_possible_flags	0
+# define v7wbi_always_flags	(-1UL)
+#endif
+
+#ifndef _TLB
+#error Unknown TLB model
+#endif
+
+#ifndef __ASSEMBLY__
+
+#include <linux/sched.h>
+
+struct cpu_tlb_fns {
+	void (*flush_user_range)(unsigned long, unsigned long, struct vm_area_struct *);
+	void (*flush_kern_range)(unsigned long, unsigned long);
+	unsigned long tlb_flags;
+};
+
+/*
+ * Select the calling method
+ */
+#ifdef MULTI_TLB
+
+#define __cpu_flush_user_tlb_range	cpu_tlb.flush_user_range
+#define __cpu_flush_kern_tlb_range	cpu_tlb.flush_kern_range
+
+#else
+
+#define __cpu_flush_user_tlb_range	__glue(_TLB,_flush_user_tlb_range)
+#define __cpu_flush_kern_tlb_range	__glue(_TLB,_flush_kern_tlb_range)
+
+extern void __cpu_flush_user_tlb_range(unsigned long, unsigned long, struct vm_area_struct *);
+extern void __cpu_flush_kern_tlb_range(unsigned long, unsigned long);
+
+#endif
+
+extern struct cpu_tlb_fns cpu_tlb;
+
+#define __cpu_tlb_flags			cpu_tlb.tlb_flags
+
+/*
+ *	TLB Management
+ *	==============
+ *
+ *	The arch/arm/mm/tlb-*.S files implement these methods.
+ *
+ *	The TLB specific code is expected to perform whatever tests it
+ *	needs to determine if it should invalidate the TLB for each
+ *	call.  Start addresses are inclusive and end addresses are
+ *	exclusive; it is safe to round these addresses down.
+ *
+ *	flush_tlb_all()
+ *
+ *		Invalidate the entire TLB.
+ *
+ *	flush_tlb_mm(mm)
+ *
+ *		Invalidate all TLB entries in a particular address
+ *		space.
+ *		- mm	- mm_struct describing address space
+ *
+ *	flush_tlb_range(mm,start,end)
+ *
+ *		Invalidate a range of TLB entries in the specified
+ *		address space.
+ *		- mm	- mm_struct describing address space
+ *		- start - start address (may not be aligned)
+ *		- end	- end address (exclusive, may not be aligned)
+ *
+ *	flush_tlb_page(vaddr,vma)
+ *
+ *		Invalidate the specified page in the specified address range.
+ *		- vaddr - virtual address (may not be aligned)
+ *		- vma	- vma_struct describing address range
+ *
+ *	flush_kern_tlb_page(kaddr)
+ *
+ *		Invalidate the TLB entry for the specified page.  The address
+ *		will be in the kernels virtual memory space.  Current uses
+ *		only require the D-TLB to be invalidated.
+ *		- kaddr - Kernel virtual memory address
+ */
+
+/*
+ * We optimise the code below by:
+ *  - building a set of TLB flags that might be set in __cpu_tlb_flags
+ *  - building a set of TLB flags that will always be set in __cpu_tlb_flags
+ *  - if we're going to need __cpu_tlb_flags, access it once and only once
+ *
+ * This allows us to build optimal assembly for the single-CPU type case,
+ * and as close to optimal given the compiler constrants for multi-CPU
+ * case.  We could do better for the multi-CPU case if the compiler
+ * implemented the "%?" method, but this has been discontinued due to too
+ * many people getting it wrong.
+ */
+#define possible_tlb_flags	(v3_possible_flags | \
+				 v4_possible_flags | \
+				 v4wbi_possible_flags | \
+				 fr_possible_flags | \
+				 v4wb_possible_flags | \
+				 v6wbi_possible_flags | \
+				 v7wbi_possible_flags)
+
+#define always_tlb_flags	(v3_always_flags & \
+				 v4_always_flags & \
+				 v4wbi_always_flags & \
+				 fr_always_flags & \
+				 v4wb_always_flags & \
+				 v6wbi_always_flags & \
+				 v7wbi_always_flags)
+
+#define tlb_flag(f)	((always_tlb_flags & (f)) || (__tlb_flag & possible_tlb_flags & (f)))
+
+static inline void local_flush_tlb_all(void)
+{
+	const int zero = 0;
+	const unsigned int __tlb_flag = __cpu_tlb_flags;
+
+	if (tlb_flag(TLB_WB))
+		dsb();
+
+	if (tlb_flag(TLB_V3_FULL))
+		asm("mcr p15, 0, %0, c6, c0, 0" : : "r" (zero) : "cc");
+	if (tlb_flag(TLB_V4_U_FULL | TLB_V6_U_FULL))
+		asm("mcr p15, 0, %0, c8, c7, 0" : : "r" (zero) : "cc");
+	if (tlb_flag(TLB_V4_D_FULL | TLB_V6_D_FULL))
+		asm("mcr p15, 0, %0, c8, c6, 0" : : "r" (zero) : "cc");
+	if (tlb_flag(TLB_V4_I_FULL | TLB_V6_I_FULL))
+		asm("mcr p15, 0, %0, c8, c5, 0" : : "r" (zero) : "cc");
+
+	if (tlb_flag(TLB_V6_I_FULL | TLB_V6_D_FULL |
+		     TLB_V6_I_PAGE | TLB_V6_D_PAGE |
+		     TLB_V6_I_ASID | TLB_V6_D_ASID)) {
+		/* flush the branch target cache */
+		asm("mcr p15, 0, %0, c7, c5, 6" : : "r" (zero) : "cc");
+		dsb();
+		isb();
+	}
+}
+
+static inline void local_flush_tlb_mm(struct mm_struct *mm)
+{
+	const int zero = 0;
+	const int asid = ASID(mm);
+	const unsigned int __tlb_flag = __cpu_tlb_flags;
+
+	if (tlb_flag(TLB_WB))
+		dsb();
+
+	if (cpu_isset(smp_processor_id(), mm->cpu_vm_mask)) {
+		if (tlb_flag(TLB_V3_FULL))
+			asm("mcr p15, 0, %0, c6, c0, 0" : : "r" (zero) : "cc");
+		if (tlb_flag(TLB_V4_U_FULL))
+			asm("mcr p15, 0, %0, c8, c7, 0" : : "r" (zero) : "cc");
+		if (tlb_flag(TLB_V4_D_FULL))
+			asm("mcr p15, 0, %0, c8, c6, 0" : : "r" (zero) : "cc");
+		if (tlb_flag(TLB_V4_I_FULL))
+			asm("mcr p15, 0, %0, c8, c5, 0" : : "r" (zero) : "cc");
+	}
+
+	if (tlb_flag(TLB_V6_U_ASID))
+		asm("mcr p15, 0, %0, c8, c7, 2" : : "r" (asid) : "cc");
+	if (tlb_flag(TLB_V6_D_ASID))
+		asm("mcr p15, 0, %0, c8, c6, 2" : : "r" (asid) : "cc");
+	if (tlb_flag(TLB_V6_I_ASID))
+		asm("mcr p15, 0, %0, c8, c5, 2" : : "r" (asid) : "cc");
+
+	if (tlb_flag(TLB_V6_I_FULL | TLB_V6_D_FULL |
+		     TLB_V6_I_PAGE | TLB_V6_D_PAGE |
+		     TLB_V6_I_ASID | TLB_V6_D_ASID)) {
+		/* flush the branch target cache */
+		asm("mcr p15, 0, %0, c7, c5, 6" : : "r" (zero) : "cc");
+		dsb();
+	}
+}
+
+static inline void
+local_flush_tlb_page(struct vm_area_struct *vma, unsigned long uaddr)
+{
+	const int zero = 0;
+	const unsigned int __tlb_flag = __cpu_tlb_flags;
+
+	uaddr = (uaddr & PAGE_MASK) | ASID(vma->vm_mm);
+
+	if (tlb_flag(TLB_WB))
+		dsb();
+
+	if (cpu_isset(smp_processor_id(), vma->vm_mm->cpu_vm_mask)) {
+		if (tlb_flag(TLB_V3_PAGE))
+			asm("mcr p15, 0, %0, c6, c0, 0" : : "r" (uaddr) : "cc");
+		if (tlb_flag(TLB_V4_U_PAGE))
+			asm("mcr p15, 0, %0, c8, c7, 1" : : "r" (uaddr) : "cc");
+		if (tlb_flag(TLB_V4_D_PAGE))
+			asm("mcr p15, 0, %0, c8, c6, 1" : : "r" (uaddr) : "cc");
+		if (tlb_flag(TLB_V4_I_PAGE))
+			asm("mcr p15, 0, %0, c8, c5, 1" : : "r" (uaddr) : "cc");
+		if (!tlb_flag(TLB_V4_I_PAGE) && tlb_flag(TLB_V4_I_FULL))
+			asm("mcr p15, 0, %0, c8, c5, 0" : : "r" (zero) : "cc");
+	}
+
+	if (tlb_flag(TLB_V6_U_PAGE))
+		asm("mcr p15, 0, %0, c8, c7, 1" : : "r" (uaddr) : "cc");
+	if (tlb_flag(TLB_V6_D_PAGE))
+		asm("mcr p15, 0, %0, c8, c6, 1" : : "r" (uaddr) : "cc");
+	if (tlb_flag(TLB_V6_I_PAGE))
+		asm("mcr p15, 0, %0, c8, c5, 1" : : "r" (uaddr) : "cc");
+
+	if (tlb_flag(TLB_V6_I_FULL | TLB_V6_D_FULL |
+		     TLB_V6_I_PAGE | TLB_V6_D_PAGE |
+		     TLB_V6_I_ASID | TLB_V6_D_ASID)) {
+		/* flush the branch target cache */
+		asm("mcr p15, 0, %0, c7, c5, 6" : : "r" (zero) : "cc");
+		dsb();
+	}
+}
+
+static inline void local_flush_tlb_kernel_page(unsigned long kaddr)
+{
+	const int zero = 0;
+	const unsigned int __tlb_flag = __cpu_tlb_flags;
+
+	kaddr &= PAGE_MASK;
+
+	if (tlb_flag(TLB_WB))
+		dsb();
+
+	if (tlb_flag(TLB_V3_PAGE))
+		asm("mcr p15, 0, %0, c6, c0, 0" : : "r" (kaddr) : "cc");
+	if (tlb_flag(TLB_V4_U_PAGE))
+		asm("mcr p15, 0, %0, c8, c7, 1" : : "r" (kaddr) : "cc");
+	if (tlb_flag(TLB_V4_D_PAGE))
+		asm("mcr p15, 0, %0, c8, c6, 1" : : "r" (kaddr) : "cc");
+	if (tlb_flag(TLB_V4_I_PAGE))
+		asm("mcr p15, 0, %0, c8, c5, 1" : : "r" (kaddr) : "cc");
+	if (!tlb_flag(TLB_V4_I_PAGE) && tlb_flag(TLB_V4_I_FULL))
+		asm("mcr p15, 0, %0, c8, c5, 0" : : "r" (zero) : "cc");
+
+	if (tlb_flag(TLB_V6_U_PAGE))
+		asm("mcr p15, 0, %0, c8, c7, 1" : : "r" (kaddr) : "cc");
+	if (tlb_flag(TLB_V6_D_PAGE))
+		asm("mcr p15, 0, %0, c8, c6, 1" : : "r" (kaddr) : "cc");
+	if (tlb_flag(TLB_V6_I_PAGE))
+		asm("mcr p15, 0, %0, c8, c5, 1" : : "r" (kaddr) : "cc");
+
+	if (tlb_flag(TLB_V6_I_FULL | TLB_V6_D_FULL |
+		     TLB_V6_I_PAGE | TLB_V6_D_PAGE |
+		     TLB_V6_I_ASID | TLB_V6_D_ASID)) {
+		/* flush the branch target cache */
+		asm("mcr p15, 0, %0, c7, c5, 6" : : "r" (zero) : "cc");
+		dsb();
+		isb();
+	}
+}
+
+/*
+ *	flush_pmd_entry
+ *
+ *	Flush a PMD entry (word aligned, or double-word aligned) to
+ *	RAM if the TLB for the CPU we are running on requires this.
+ *	This is typically used when we are creating PMD entries.
+ *
+ *	clean_pmd_entry
+ *
+ *	Clean (but don't drain the write buffer) if the CPU requires
+ *	these operations.  This is typically used when we are removing
+ *	PMD entries.
+ */
+static inline void flush_pmd_entry(pmd_t *pmd)
+{
+	const unsigned int __tlb_flag = __cpu_tlb_flags;
+
+	if (tlb_flag(TLB_DCLEAN))
+		asm("mcr	p15, 0, %0, c7, c10, 1	@ flush_pmd"
+			: : "r" (pmd) : "cc");
+
+	if (tlb_flag(TLB_L2CLEAN_FR))
+		asm("mcr	p15, 1, %0, c15, c9, 1  @ L2 flush_pmd"
+			: : "r" (pmd) : "cc");
+
+	if (tlb_flag(TLB_WB))
+		dsb();
+}
+
+static inline void clean_pmd_entry(pmd_t *pmd)
+{
+	const unsigned int __tlb_flag = __cpu_tlb_flags;
+
+	if (tlb_flag(TLB_DCLEAN))
+		asm("mcr	p15, 0, %0, c7, c10, 1	@ flush_pmd"
+			: : "r" (pmd) : "cc");
+
+	if (tlb_flag(TLB_L2CLEAN_FR))
+		asm("mcr	p15, 1, %0, c15, c9, 1  @ L2 flush_pmd"
+			: : "r" (pmd) : "cc");
+}
+
+#undef tlb_flag
+#undef always_tlb_flags
+#undef possible_tlb_flags
+
+/*
+ * Convert calls to our calling convention.
+ */
+#define local_flush_tlb_range(vma,start,end)	__cpu_flush_user_tlb_range(start,end,vma)
+#define local_flush_tlb_kernel_range(s,e)	__cpu_flush_kern_tlb_range(s,e)
+
+#ifndef CONFIG_SMP
+#define flush_tlb_all		local_flush_tlb_all
+#define flush_tlb_mm		local_flush_tlb_mm
+#define flush_tlb_page		local_flush_tlb_page
+#define flush_tlb_kernel_page	local_flush_tlb_kernel_page
+#define flush_tlb_range		local_flush_tlb_range
+#define flush_tlb_kernel_range	local_flush_tlb_kernel_range
+#else
+extern void flush_tlb_all(void);
+extern void flush_tlb_mm(struct mm_struct *mm);
+extern void flush_tlb_page(struct vm_area_struct *vma, unsigned long uaddr);
+extern void flush_tlb_kernel_page(unsigned long kaddr);
+extern void flush_tlb_range(struct vm_area_struct *vma, unsigned long start, unsigned long end);
+extern void flush_tlb_kernel_range(unsigned long start, unsigned long end);
+#endif
+
+/*
+ * if PG_dcache_dirty is set for the page, we need to ensure that any
+ * cache entries for the kernels virtual memory range are written
+ * back to the page.
+ */
+extern void update_mmu_cache(struct vm_area_struct *vma, unsigned long addr, pte_t pte);
+
+#endif
+
+#endif /* CONFIG_MMU */
+
+#endif
diff --git a/include/asm-arm/topology.h b/arch/arm/include/asm/topology.h
index accbd7cad9b5..accbd7cad9b5 100644
--- a/include/asm-arm/topology.h
+++ b/arch/arm/include/asm/topology.h
diff --git a/include/asm-arm/traps.h b/arch/arm/include/asm/traps.h
index aa399aec568e..aa399aec568e 100644
--- a/include/asm-arm/traps.h
+++ b/arch/arm/include/asm/traps.h
diff --git a/include/asm-arm/types.h b/arch/arm/include/asm/types.h
index 345df01534a4..345df01534a4 100644
--- a/include/asm-arm/types.h
+++ b/arch/arm/include/asm/types.h
diff --git a/arch/arm/include/asm/uaccess.h b/arch/arm/include/asm/uaccess.h
new file mode 100644
index 000000000000..d0f51ff900b5
--- /dev/null
+++ b/arch/arm/include/asm/uaccess.h
@@ -0,0 +1,444 @@
+/*
+ *  arch/arm/include/asm/uaccess.h
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef _ASMARM_UACCESS_H
+#define _ASMARM_UACCESS_H
+
+/*
+ * User space memory access functions
+ */
+#include <linux/sched.h>
+#include <asm/errno.h>
+#include <asm/memory.h>
+#include <asm/domain.h>
+#include <asm/system.h>
+
+#define VERIFY_READ 0
+#define VERIFY_WRITE 1
+
+/*
+ * The exception table consists of pairs of addresses: the first is the
+ * address of an instruction that is allowed to fault, and the second is
+ * the address at which the program should continue.  No registers are
+ * modified, so it is entirely up to the continuation code to figure out
+ * what to do.
+ *
+ * All the routines below use bits of fixup code that are out of line
+ * with the main instruction path.  This means when everything is well,
+ * we don't even have to jump over them.  Further, they do not intrude
+ * on our cache or tlb entries.
+ */
+
+struct exception_table_entry
+{
+	unsigned long insn, fixup;
+};
+
+extern int fixup_exception(struct pt_regs *regs);
+
+/*
+ * These two are intentionally not defined anywhere - if the kernel
+ * code generates any references to them, that's a bug.
+ */
+extern int __get_user_bad(void);
+extern int __put_user_bad(void);
+
+/*
+ * Note that this is actually 0x1,0000,0000
+ */
+#define KERNEL_DS	0x00000000
+#define get_ds()	(KERNEL_DS)
+
+#ifdef CONFIG_MMU
+
+#define USER_DS		TASK_SIZE
+#define get_fs()	(current_thread_info()->addr_limit)
+
+static inline void set_fs(mm_segment_t fs)
+{
+	current_thread_info()->addr_limit = fs;
+	modify_domain(DOMAIN_KERNEL, fs ? DOMAIN_CLIENT : DOMAIN_MANAGER);
+}
+
+#define segment_eq(a,b)	((a) == (b))
+
+#define __addr_ok(addr) ({ \
+	unsigned long flag; \
+	__asm__("cmp %2, %0; movlo %0, #0" \
+		: "=&r" (flag) \
+		: "0" (current_thread_info()->addr_limit), "r" (addr) \
+		: "cc"); \
+	(flag == 0); })
+
+/* We use 33-bit arithmetic here... */
+#define __range_ok(addr,size) ({ \
+	unsigned long flag, roksum; \
+	__chk_user_ptr(addr);	\
+	__asm__("adds %1, %2, %3; sbcccs %1, %1, %0; movcc %0, #0" \
+		: "=&r" (flag), "=&r" (roksum) \
+		: "r" (addr), "Ir" (size), "0" (current_thread_info()->addr_limit) \
+		: "cc"); \
+	flag; })
+
+/*
+ * Single-value transfer routines.  They automatically use the right
+ * size if we just have the right pointer type.  Note that the functions
+ * which read from user space (*get_*) need to take care not to leak
+ * kernel data even if the calling code is buggy and fails to check
+ * the return value.  This means zeroing out the destination variable
+ * or buffer on error.  Normally this is done out of line by the
+ * fixup code, but there are a few places where it intrudes on the
+ * main code path.  When we only write to user space, there is no
+ * problem.
+ */
+extern int __get_user_1(void *);
+extern int __get_user_2(void *);
+extern int __get_user_4(void *);
+
+#define __get_user_x(__r2,__p,__e,__s,__i...)				\
+	   __asm__ __volatile__ (					\
+		__asmeq("%0", "r0") __asmeq("%1", "r2")			\
+		"bl	__get_user_" #__s				\
+		: "=&r" (__e), "=r" (__r2)				\
+		: "0" (__p)						\
+		: __i, "cc")
+
+#define get_user(x,p)							\
+	({								\
+		register const typeof(*(p)) __user *__p asm("r0") = (p);\
+		register unsigned long __r2 asm("r2");			\
+		register int __e asm("r0");				\
+		switch (sizeof(*(__p))) {				\
+		case 1:							\
+			__get_user_x(__r2, __p, __e, 1, "lr");		\
+	       		break;						\
+		case 2:							\
+			__get_user_x(__r2, __p, __e, 2, "r3", "lr");	\
+			break;						\
+		case 4:							\
+	       		__get_user_x(__r2, __p, __e, 4, "lr");		\
+			break;						\
+		default: __e = __get_user_bad(); break;			\
+		}							\
+		x = (typeof(*(p))) __r2;				\
+		__e;							\
+	})
+
+extern int __put_user_1(void *, unsigned int);
+extern int __put_user_2(void *, unsigned int);
+extern int __put_user_4(void *, unsigned int);
+extern int __put_user_8(void *, unsigned long long);
+
+#define __put_user_x(__r2,__p,__e,__s)					\
+	   __asm__ __volatile__ (					\
+		__asmeq("%0", "r0") __asmeq("%2", "r2")			\
+		"bl	__put_user_" #__s				\
+		: "=&r" (__e)						\
+		: "0" (__p), "r" (__r2)					\
+		: "ip", "lr", "cc")
+
+#define put_user(x,p)							\
+	({								\
+		register const typeof(*(p)) __r2 asm("r2") = (x);	\
+		register const typeof(*(p)) __user *__p asm("r0") = (p);\
+		register int __e asm("r0");				\
+		switch (sizeof(*(__p))) {				\
+		case 1:							\
+			__put_user_x(__r2, __p, __e, 1);		\
+			break;						\
+		case 2:							\
+			__put_user_x(__r2, __p, __e, 2);		\
+			break;						\
+		case 4:							\
+			__put_user_x(__r2, __p, __e, 4);		\
+			break;						\
+		case 8:							\
+			__put_user_x(__r2, __p, __e, 8);		\
+			break;						\
+		default: __e = __put_user_bad(); break;			\
+		}							\
+		__e;							\
+	})
+
+#else /* CONFIG_MMU */
+
+/*
+ * uClinux has only one addr space, so has simplified address limits.
+ */
+#define USER_DS			KERNEL_DS
+
+#define segment_eq(a,b)		(1)
+#define __addr_ok(addr)		(1)
+#define __range_ok(addr,size)	(0)
+#define get_fs()		(KERNEL_DS)
+
+static inline void set_fs(mm_segment_t fs)
+{
+}
+
+#define get_user(x,p)	__get_user(x,p)
+#define put_user(x,p)	__put_user(x,p)
+
+#endif /* CONFIG_MMU */
+
+#define access_ok(type,addr,size)	(__range_ok(addr,size) == 0)
+
+/*
+ * The "__xxx" versions of the user access functions do not verify the
+ * address space - it must have been done previously with a separate
+ * "access_ok()" call.
+ *
+ * The "xxx_error" versions set the third argument to EFAULT if an
+ * error occurs, and leave it unchanged on success.  Note that these
+ * versions are void (ie, don't return a value as such).
+ */
+#define __get_user(x,ptr)						\
+({									\
+	long __gu_err = 0;						\
+	__get_user_err((x),(ptr),__gu_err);				\
+	__gu_err;							\
+})
+
+#define __get_user_error(x,ptr,err)					\
+({									\
+	__get_user_err((x),(ptr),err);					\
+	(void) 0;							\
+})
+
+#define __get_user_err(x,ptr,err)					\
+do {									\
+	unsigned long __gu_addr = (unsigned long)(ptr);			\
+	unsigned long __gu_val;						\
+	__chk_user_ptr(ptr);						\
+	switch (sizeof(*(ptr))) {					\
+	case 1:	__get_user_asm_byte(__gu_val,__gu_addr,err);	break;	\
+	case 2:	__get_user_asm_half(__gu_val,__gu_addr,err);	break;	\
+	case 4:	__get_user_asm_word(__gu_val,__gu_addr,err);	break;	\
+	default: (__gu_val) = __get_user_bad();				\
+	}								\
+	(x) = (__typeof__(*(ptr)))__gu_val;				\
+} while (0)
+
+#define __get_user_asm_byte(x,addr,err)				\
+	__asm__ __volatile__(					\
+	"1:	ldrbt	%1,[%2],#0\n"				\
+	"2:\n"							\
+	"	.section .fixup,\"ax\"\n"			\
+	"	.align	2\n"					\
+	"3:	mov	%0, %3\n"				\
+	"	mov	%1, #0\n"				\
+	"	b	2b\n"					\
+	"	.previous\n"					\
+	"	.section __ex_table,\"a\"\n"			\
+	"	.align	3\n"					\
+	"	.long	1b, 3b\n"				\
+	"	.previous"					\
+	: "+r" (err), "=&r" (x)					\
+	: "r" (addr), "i" (-EFAULT)				\
+	: "cc")
+
+#ifndef __ARMEB__
+#define __get_user_asm_half(x,__gu_addr,err)			\
+({								\
+	unsigned long __b1, __b2;				\
+	__get_user_asm_byte(__b1, __gu_addr, err);		\
+	__get_user_asm_byte(__b2, __gu_addr + 1, err);		\
+	(x) = __b1 | (__b2 << 8);				\
+})
+#else
+#define __get_user_asm_half(x,__gu_addr,err)			\
+({								\
+	unsigned long __b1, __b2;				\
+	__get_user_asm_byte(__b1, __gu_addr, err);		\
+	__get_user_asm_byte(__b2, __gu_addr + 1, err);		\
+	(x) = (__b1 << 8) | __b2;				\
+})
+#endif
+
+#define __get_user_asm_word(x,addr,err)				\
+	__asm__ __volatile__(					\
+	"1:	ldrt	%1,[%2],#0\n"				\
+	"2:\n"							\
+	"	.section .fixup,\"ax\"\n"			\
+	"	.align	2\n"					\
+	"3:	mov	%0, %3\n"				\
+	"	mov	%1, #0\n"				\
+	"	b	2b\n"					\
+	"	.previous\n"					\
+	"	.section __ex_table,\"a\"\n"			\
+	"	.align	3\n"					\
+	"	.long	1b, 3b\n"				\
+	"	.previous"					\
+	: "+r" (err), "=&r" (x)					\
+	: "r" (addr), "i" (-EFAULT)				\
+	: "cc")
+
+#define __put_user(x,ptr)						\
+({									\
+	long __pu_err = 0;						\
+	__put_user_err((x),(ptr),__pu_err);				\
+	__pu_err;							\
+})
+
+#define __put_user_error(x,ptr,err)					\
+({									\
+	__put_user_err((x),(ptr),err);					\
+	(void) 0;							\
+})
+
+#define __put_user_err(x,ptr,err)					\
+do {									\
+	unsigned long __pu_addr = (unsigned long)(ptr);			\
+	__typeof__(*(ptr)) __pu_val = (x);				\
+	__chk_user_ptr(ptr);						\
+	switch (sizeof(*(ptr))) {					\
+	case 1: __put_user_asm_byte(__pu_val,__pu_addr,err);	break;	\
+	case 2: __put_user_asm_half(__pu_val,__pu_addr,err);	break;	\
+	case 4: __put_user_asm_word(__pu_val,__pu_addr,err);	break;	\
+	case 8:	__put_user_asm_dword(__pu_val,__pu_addr,err);	break;	\
+	default: __put_user_bad();					\
+	}								\
+} while (0)
+
+#define __put_user_asm_byte(x,__pu_addr,err)			\
+	__asm__ __volatile__(					\
+	"1:	strbt	%1,[%2],#0\n"				\
+	"2:\n"							\
+	"	.section .fixup,\"ax\"\n"			\
+	"	.align	2\n"					\
+	"3:	mov	%0, %3\n"				\
+	"	b	2b\n"					\
+	"	.previous\n"					\
+	"	.section __ex_table,\"a\"\n"			\
+	"	.align	3\n"					\
+	"	.long	1b, 3b\n"				\
+	"	.previous"					\
+	: "+r" (err)						\
+	: "r" (x), "r" (__pu_addr), "i" (-EFAULT)		\
+	: "cc")
+
+#ifndef __ARMEB__
+#define __put_user_asm_half(x,__pu_addr,err)			\
+({								\
+	unsigned long __temp = (unsigned long)(x);		\
+	__put_user_asm_byte(__temp, __pu_addr, err);		\
+	__put_user_asm_byte(__temp >> 8, __pu_addr + 1, err);	\
+})
+#else
+#define __put_user_asm_half(x,__pu_addr,err)			\
+({								\
+	unsigned long __temp = (unsigned long)(x);		\
+	__put_user_asm_byte(__temp >> 8, __pu_addr, err);	\
+	__put_user_asm_byte(__temp, __pu_addr + 1, err);	\
+})
+#endif
+
+#define __put_user_asm_word(x,__pu_addr,err)			\
+	__asm__ __volatile__(					\
+	"1:	strt	%1,[%2],#0\n"				\
+	"2:\n"							\
+	"	.section .fixup,\"ax\"\n"			\
+	"	.align	2\n"					\
+	"3:	mov	%0, %3\n"				\
+	"	b	2b\n"					\
+	"	.previous\n"					\
+	"	.section __ex_table,\"a\"\n"			\
+	"	.align	3\n"					\
+	"	.long	1b, 3b\n"				\
+	"	.previous"					\
+	: "+r" (err)						\
+	: "r" (x), "r" (__pu_addr), "i" (-EFAULT)		\
+	: "cc")
+
+#ifndef __ARMEB__
+#define	__reg_oper0	"%R2"
+#define	__reg_oper1	"%Q2"
+#else
+#define	__reg_oper0	"%Q2"
+#define	__reg_oper1	"%R2"
+#endif
+
+#define __put_user_asm_dword(x,__pu_addr,err)			\
+	__asm__ __volatile__(					\
+	"1:	strt	" __reg_oper1 ", [%1], #4\n"		\
+	"2:	strt	" __reg_oper0 ", [%1], #0\n"		\
+	"3:\n"							\
+	"	.section .fixup,\"ax\"\n"			\
+	"	.align	2\n"					\
+	"4:	mov	%0, %3\n"				\
+	"	b	3b\n"					\
+	"	.previous\n"					\
+	"	.section __ex_table,\"a\"\n"			\
+	"	.align	3\n"					\
+	"	.long	1b, 4b\n"				\
+	"	.long	2b, 4b\n"				\
+	"	.previous"					\
+	: "+r" (err), "+r" (__pu_addr)				\
+	: "r" (x), "i" (-EFAULT)				\
+	: "cc")
+
+
+#ifdef CONFIG_MMU
+extern unsigned long __must_check __copy_from_user(void *to, const void __user *from, unsigned long n);
+extern unsigned long __must_check __copy_to_user(void __user *to, const void *from, unsigned long n);
+extern unsigned long __must_check __clear_user(void __user *addr, unsigned long n);
+#else
+#define __copy_from_user(to,from,n)	(memcpy(to, (void __force *)from, n), 0)
+#define __copy_to_user(to,from,n)	(memcpy((void __force *)to, from, n), 0)
+#define __clear_user(addr,n)		(memset((void __force *)addr, 0, n), 0)
+#endif
+
+extern unsigned long __must_check __strncpy_from_user(char *to, const char __user *from, unsigned long count);
+extern unsigned long __must_check __strnlen_user(const char __user *s, long n);
+
+static inline unsigned long __must_check copy_from_user(void *to, const void __user *from, unsigned long n)
+{
+	if (access_ok(VERIFY_READ, from, n))
+		n = __copy_from_user(to, from, n);
+	else /* security hole - plug it */
+		memzero(to, n);
+	return n;
+}
+
+static inline unsigned long __must_check copy_to_user(void __user *to, const void *from, unsigned long n)
+{
+	if (access_ok(VERIFY_WRITE, to, n))
+		n = __copy_to_user(to, from, n);
+	return n;
+}
+
+#define __copy_to_user_inatomic __copy_to_user
+#define __copy_from_user_inatomic __copy_from_user
+
+static inline unsigned long __must_check clear_user(void __user *to, unsigned long n)
+{
+	if (access_ok(VERIFY_WRITE, to, n))
+		n = __clear_user(to, n);
+	return n;
+}
+
+static inline long __must_check strncpy_from_user(char *dst, const char __user *src, long count)
+{
+	long res = -EFAULT;
+	if (access_ok(VERIFY_READ, src, 1))
+		res = __strncpy_from_user(dst, src, count);
+	return res;
+}
+
+#define strlen_user(s)	strnlen_user(s, ~0UL >> 1)
+
+static inline long __must_check strnlen_user(const char __user *s, long n)
+{
+	unsigned long res = 0;
+
+	if (__addr_ok(s))
+		res = __strnlen_user(s, n);
+
+	return res;
+}
+
+#endif /* _ASMARM_UACCESS_H */
diff --git a/include/asm-arm/ucontext.h b/arch/arm/include/asm/ucontext.h
index bf65e9f4525d..bf65e9f4525d 100644
--- a/include/asm-arm/ucontext.h
+++ b/arch/arm/include/asm/ucontext.h
diff --git a/include/asm-arm/unaligned.h b/arch/arm/include/asm/unaligned.h
index 44593a894903..44593a894903 100644
--- a/include/asm-arm/unaligned.h
+++ b/arch/arm/include/asm/unaligned.h
diff --git a/arch/arm/include/asm/unistd.h b/arch/arm/include/asm/unistd.h
new file mode 100644
index 000000000000..010618487cf1
--- /dev/null
+++ b/arch/arm/include/asm/unistd.h
@@ -0,0 +1,456 @@
+/*
+ *  arch/arm/include/asm/unistd.h
+ *
+ *  Copyright (C) 2001-2005 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Please forward _all_ changes to this file to rmk@arm.linux.org.uk,
+ * no matter what the change is.  Thanks!
+ */
+#ifndef __ASM_ARM_UNISTD_H
+#define __ASM_ARM_UNISTD_H
+
+#define __NR_OABI_SYSCALL_BASE	0x900000
+
+#if defined(__thumb__) || defined(__ARM_EABI__)
+#define __NR_SYSCALL_BASE	0
+#else
+#define __NR_SYSCALL_BASE	__NR_OABI_SYSCALL_BASE
+#endif
+
+/*
+ * This file contains the system call numbers.
+ */
+
+#define __NR_restart_syscall		(__NR_SYSCALL_BASE+  0)
+#define __NR_exit			(__NR_SYSCALL_BASE+  1)
+#define __NR_fork			(__NR_SYSCALL_BASE+  2)
+#define __NR_read			(__NR_SYSCALL_BASE+  3)
+#define __NR_write			(__NR_SYSCALL_BASE+  4)
+#define __NR_open			(__NR_SYSCALL_BASE+  5)
+#define __NR_close			(__NR_SYSCALL_BASE+  6)
+					/* 7 was sys_waitpid */
+#define __NR_creat			(__NR_SYSCALL_BASE+  8)
+#define __NR_link			(__NR_SYSCALL_BASE+  9)
+#define __NR_unlink			(__NR_SYSCALL_BASE+ 10)
+#define __NR_execve			(__NR_SYSCALL_BASE+ 11)
+#define __NR_chdir			(__NR_SYSCALL_BASE+ 12)
+#define __NR_time			(__NR_SYSCALL_BASE+ 13)
+#define __NR_mknod			(__NR_SYSCALL_BASE+ 14)
+#define __NR_chmod			(__NR_SYSCALL_BASE+ 15)
+#define __NR_lchown			(__NR_SYSCALL_BASE+ 16)
+					/* 17 was sys_break */
+					/* 18 was sys_stat */
+#define __NR_lseek			(__NR_SYSCALL_BASE+ 19)
+#define __NR_getpid			(__NR_SYSCALL_BASE+ 20)
+#define __NR_mount			(__NR_SYSCALL_BASE+ 21)
+#define __NR_umount			(__NR_SYSCALL_BASE+ 22)
+#define __NR_setuid			(__NR_SYSCALL_BASE+ 23)
+#define __NR_getuid			(__NR_SYSCALL_BASE+ 24)
+#define __NR_stime			(__NR_SYSCALL_BASE+ 25)
+#define __NR_ptrace			(__NR_SYSCALL_BASE+ 26)
+#define __NR_alarm			(__NR_SYSCALL_BASE+ 27)
+					/* 28 was sys_fstat */
+#define __NR_pause			(__NR_SYSCALL_BASE+ 29)
+#define __NR_utime			(__NR_SYSCALL_BASE+ 30)
+					/* 31 was sys_stty */
+					/* 32 was sys_gtty */
+#define __NR_access			(__NR_SYSCALL_BASE+ 33)
+#define __NR_nice			(__NR_SYSCALL_BASE+ 34)
+					/* 35 was sys_ftime */
+#define __NR_sync			(__NR_SYSCALL_BASE+ 36)
+#define __NR_kill			(__NR_SYSCALL_BASE+ 37)
+#define __NR_rename			(__NR_SYSCALL_BASE+ 38)
+#define __NR_mkdir			(__NR_SYSCALL_BASE+ 39)
+#define __NR_rmdir			(__NR_SYSCALL_BASE+ 40)
+#define __NR_dup			(__NR_SYSCALL_BASE+ 41)
+#define __NR_pipe			(__NR_SYSCALL_BASE+ 42)
+#define __NR_times			(__NR_SYSCALL_BASE+ 43)
+					/* 44 was sys_prof */
+#define __NR_brk			(__NR_SYSCALL_BASE+ 45)
+#define __NR_setgid			(__NR_SYSCALL_BASE+ 46)
+#define __NR_getgid			(__NR_SYSCALL_BASE+ 47)
+					/* 48 was sys_signal */
+#define __NR_geteuid			(__NR_SYSCALL_BASE+ 49)
+#define __NR_getegid			(__NR_SYSCALL_BASE+ 50)
+#define __NR_acct			(__NR_SYSCALL_BASE+ 51)
+#define __NR_umount2			(__NR_SYSCALL_BASE+ 52)
+					/* 53 was sys_lock */
+#define __NR_ioctl			(__NR_SYSCALL_BASE+ 54)
+#define __NR_fcntl			(__NR_SYSCALL_BASE+ 55)
+					/* 56 was sys_mpx */
+#define __NR_setpgid			(__NR_SYSCALL_BASE+ 57)
+					/* 58 was sys_ulimit */
+					/* 59 was sys_olduname */
+#define __NR_umask			(__NR_SYSCALL_BASE+ 60)
+#define __NR_chroot			(__NR_SYSCALL_BASE+ 61)
+#define __NR_ustat			(__NR_SYSCALL_BASE+ 62)
+#define __NR_dup2			(__NR_SYSCALL_BASE+ 63)
+#define __NR_getppid			(__NR_SYSCALL_BASE+ 64)
+#define __NR_getpgrp			(__NR_SYSCALL_BASE+ 65)
+#define __NR_setsid			(__NR_SYSCALL_BASE+ 66)
+#define __NR_sigaction			(__NR_SYSCALL_BASE+ 67)
+					/* 68 was sys_sgetmask */
+					/* 69 was sys_ssetmask */
+#define __NR_setreuid			(__NR_SYSCALL_BASE+ 70)
+#define __NR_setregid			(__NR_SYSCALL_BASE+ 71)
+#define __NR_sigsuspend			(__NR_SYSCALL_BASE+ 72)
+#define __NR_sigpending			(__NR_SYSCALL_BASE+ 73)
+#define __NR_sethostname		(__NR_SYSCALL_BASE+ 74)
+#define __NR_setrlimit			(__NR_SYSCALL_BASE+ 75)
+#define __NR_getrlimit			(__NR_SYSCALL_BASE+ 76)	/* Back compat 2GB limited rlimit */
+#define __NR_getrusage			(__NR_SYSCALL_BASE+ 77)
+#define __NR_gettimeofday		(__NR_SYSCALL_BASE+ 78)
+#define __NR_settimeofday		(__NR_SYSCALL_BASE+ 79)
+#define __NR_getgroups			(__NR_SYSCALL_BASE+ 80)
+#define __NR_setgroups			(__NR_SYSCALL_BASE+ 81)
+#define __NR_select			(__NR_SYSCALL_BASE+ 82)
+#define __NR_symlink			(__NR_SYSCALL_BASE+ 83)
+					/* 84 was sys_lstat */
+#define __NR_readlink			(__NR_SYSCALL_BASE+ 85)
+#define __NR_uselib			(__NR_SYSCALL_BASE+ 86)
+#define __NR_swapon			(__NR_SYSCALL_BASE+ 87)
+#define __NR_reboot			(__NR_SYSCALL_BASE+ 88)
+#define __NR_readdir			(__NR_SYSCALL_BASE+ 89)
+#define __NR_mmap			(__NR_SYSCALL_BASE+ 90)
+#define __NR_munmap			(__NR_SYSCALL_BASE+ 91)
+#define __NR_truncate			(__NR_SYSCALL_BASE+ 92)
+#define __NR_ftruncate			(__NR_SYSCALL_BASE+ 93)
+#define __NR_fchmod			(__NR_SYSCALL_BASE+ 94)
+#define __NR_fchown			(__NR_SYSCALL_BASE+ 95)
+#define __NR_getpriority		(__NR_SYSCALL_BASE+ 96)
+#define __NR_setpriority		(__NR_SYSCALL_BASE+ 97)
+					/* 98 was sys_profil */
+#define __NR_statfs			(__NR_SYSCALL_BASE+ 99)
+#define __NR_fstatfs			(__NR_SYSCALL_BASE+100)
+					/* 101 was sys_ioperm */
+#define __NR_socketcall			(__NR_SYSCALL_BASE+102)
+#define __NR_syslog			(__NR_SYSCALL_BASE+103)
+#define __NR_setitimer			(__NR_SYSCALL_BASE+104)
+#define __NR_getitimer			(__NR_SYSCALL_BASE+105)
+#define __NR_stat			(__NR_SYSCALL_BASE+106)
+#define __NR_lstat			(__NR_SYSCALL_BASE+107)
+#define __NR_fstat			(__NR_SYSCALL_BASE+108)
+					/* 109 was sys_uname */
+					/* 110 was sys_iopl */
+#define __NR_vhangup			(__NR_SYSCALL_BASE+111)
+					/* 112 was sys_idle */
+#define __NR_syscall			(__NR_SYSCALL_BASE+113) /* syscall to call a syscall! */
+#define __NR_wait4			(__NR_SYSCALL_BASE+114)
+#define __NR_swapoff			(__NR_SYSCALL_BASE+115)
+#define __NR_sysinfo			(__NR_SYSCALL_BASE+116)
+#define __NR_ipc			(__NR_SYSCALL_BASE+117)
+#define __NR_fsync			(__NR_SYSCALL_BASE+118)
+#define __NR_sigreturn			(__NR_SYSCALL_BASE+119)
+#define __NR_clone			(__NR_SYSCALL_BASE+120)
+#define __NR_setdomainname		(__NR_SYSCALL_BASE+121)
+#define __NR_uname			(__NR_SYSCALL_BASE+122)
+					/* 123 was sys_modify_ldt */
+#define __NR_adjtimex			(__NR_SYSCALL_BASE+124)
+#define __NR_mprotect			(__NR_SYSCALL_BASE+125)
+#define __NR_sigprocmask		(__NR_SYSCALL_BASE+126)
+					/* 127 was sys_create_module */
+#define __NR_init_module		(__NR_SYSCALL_BASE+128)
+#define __NR_delete_module		(__NR_SYSCALL_BASE+129)
+					/* 130 was sys_get_kernel_syms */
+#define __NR_quotactl			(__NR_SYSCALL_BASE+131)
+#define __NR_getpgid			(__NR_SYSCALL_BASE+132)
+#define __NR_fchdir			(__NR_SYSCALL_BASE+133)
+#define __NR_bdflush			(__NR_SYSCALL_BASE+134)
+#define __NR_sysfs			(__NR_SYSCALL_BASE+135)
+#define __NR_personality		(__NR_SYSCALL_BASE+136)
+					/* 137 was sys_afs_syscall */
+#define __NR_setfsuid			(__NR_SYSCALL_BASE+138)
+#define __NR_setfsgid			(__NR_SYSCALL_BASE+139)
+#define __NR__llseek			(__NR_SYSCALL_BASE+140)
+#define __NR_getdents			(__NR_SYSCALL_BASE+141)
+#define __NR__newselect			(__NR_SYSCALL_BASE+142)
+#define __NR_flock			(__NR_SYSCALL_BASE+143)
+#define __NR_msync			(__NR_SYSCALL_BASE+144)
+#define __NR_readv			(__NR_SYSCALL_BASE+145)
+#define __NR_writev			(__NR_SYSCALL_BASE+146)
+#define __NR_getsid			(__NR_SYSCALL_BASE+147)
+#define __NR_fdatasync			(__NR_SYSCALL_BASE+148)
+#define __NR__sysctl			(__NR_SYSCALL_BASE+149)
+#define __NR_mlock			(__NR_SYSCALL_BASE+150)
+#define __NR_munlock			(__NR_SYSCALL_BASE+151)
+#define __NR_mlockall			(__NR_SYSCALL_BASE+152)
+#define __NR_munlockall			(__NR_SYSCALL_BASE+153)
+#define __NR_sched_setparam		(__NR_SYSCALL_BASE+154)
+#define __NR_sched_getparam		(__NR_SYSCALL_BASE+155)
+#define __NR_sched_setscheduler		(__NR_SYSCALL_BASE+156)
+#define __NR_sched_getscheduler		(__NR_SYSCALL_BASE+157)
+#define __NR_sched_yield		(__NR_SYSCALL_BASE+158)
+#define __NR_sched_get_priority_max	(__NR_SYSCALL_BASE+159)
+#define __NR_sched_get_priority_min	(__NR_SYSCALL_BASE+160)
+#define __NR_sched_rr_get_interval	(__NR_SYSCALL_BASE+161)
+#define __NR_nanosleep			(__NR_SYSCALL_BASE+162)
+#define __NR_mremap			(__NR_SYSCALL_BASE+163)
+#define __NR_setresuid			(__NR_SYSCALL_BASE+164)
+#define __NR_getresuid			(__NR_SYSCALL_BASE+165)
+					/* 166 was sys_vm86 */
+					/* 167 was sys_query_module */
+#define __NR_poll			(__NR_SYSCALL_BASE+168)
+#define __NR_nfsservctl			(__NR_SYSCALL_BASE+169)
+#define __NR_setresgid			(__NR_SYSCALL_BASE+170)
+#define __NR_getresgid			(__NR_SYSCALL_BASE+171)
+#define __NR_prctl			(__NR_SYSCALL_BASE+172)
+#define __NR_rt_sigreturn		(__NR_SYSCALL_BASE+173)
+#define __NR_rt_sigaction		(__NR_SYSCALL_BASE+174)
+#define __NR_rt_sigprocmask		(__NR_SYSCALL_BASE+175)
+#define __NR_rt_sigpending		(__NR_SYSCALL_BASE+176)
+#define __NR_rt_sigtimedwait		(__NR_SYSCALL_BASE+177)
+#define __NR_rt_sigqueueinfo		(__NR_SYSCALL_BASE+178)
+#define __NR_rt_sigsuspend		(__NR_SYSCALL_BASE+179)
+#define __NR_pread64			(__NR_SYSCALL_BASE+180)
+#define __NR_pwrite64			(__NR_SYSCALL_BASE+181)
+#define __NR_chown			(__NR_SYSCALL_BASE+182)
+#define __NR_getcwd			(__NR_SYSCALL_BASE+183)
+#define __NR_capget			(__NR_SYSCALL_BASE+184)
+#define __NR_capset			(__NR_SYSCALL_BASE+185)
+#define __NR_sigaltstack		(__NR_SYSCALL_BASE+186)
+#define __NR_sendfile			(__NR_SYSCALL_BASE+187)
+					/* 188 reserved */
+					/* 189 reserved */
+#define __NR_vfork			(__NR_SYSCALL_BASE+190)
+#define __NR_ugetrlimit			(__NR_SYSCALL_BASE+191)	/* SuS compliant getrlimit */
+#define __NR_mmap2			(__NR_SYSCALL_BASE+192)
+#define __NR_truncate64			(__NR_SYSCALL_BASE+193)
+#define __NR_ftruncate64		(__NR_SYSCALL_BASE+194)
+#define __NR_stat64			(__NR_SYSCALL_BASE+195)
+#define __NR_lstat64			(__NR_SYSCALL_BASE+196)
+#define __NR_fstat64			(__NR_SYSCALL_BASE+197)
+#define __NR_lchown32			(__NR_SYSCALL_BASE+198)
+#define __NR_getuid32			(__NR_SYSCALL_BASE+199)
+#define __NR_getgid32			(__NR_SYSCALL_BASE+200)
+#define __NR_geteuid32			(__NR_SYSCALL_BASE+201)
+#define __NR_getegid32			(__NR_SYSCALL_BASE+202)
+#define __NR_setreuid32			(__NR_SYSCALL_BASE+203)
+#define __NR_setregid32			(__NR_SYSCALL_BASE+204)
+#define __NR_getgroups32		(__NR_SYSCALL_BASE+205)
+#define __NR_setgroups32		(__NR_SYSCALL_BASE+206)
+#define __NR_fchown32			(__NR_SYSCALL_BASE+207)
+#define __NR_setresuid32		(__NR_SYSCALL_BASE+208)
+#define __NR_getresuid32		(__NR_SYSCALL_BASE+209)
+#define __NR_setresgid32		(__NR_SYSCALL_BASE+210)
+#define __NR_getresgid32		(__NR_SYSCALL_BASE+211)
+#define __NR_chown32			(__NR_SYSCALL_BASE+212)
+#define __NR_setuid32			(__NR_SYSCALL_BASE+213)
+#define __NR_setgid32			(__NR_SYSCALL_BASE+214)
+#define __NR_setfsuid32			(__NR_SYSCALL_BASE+215)
+#define __NR_setfsgid32			(__NR_SYSCALL_BASE+216)
+#define __NR_getdents64			(__NR_SYSCALL_BASE+217)
+#define __NR_pivot_root			(__NR_SYSCALL_BASE+218)
+#define __NR_mincore			(__NR_SYSCALL_BASE+219)
+#define __NR_madvise			(__NR_SYSCALL_BASE+220)
+#define __NR_fcntl64			(__NR_SYSCALL_BASE+221)
+					/* 222 for tux */
+					/* 223 is unused */
+#define __NR_gettid			(__NR_SYSCALL_BASE+224)
+#define __NR_readahead			(__NR_SYSCALL_BASE+225)
+#define __NR_setxattr			(__NR_SYSCALL_BASE+226)
+#define __NR_lsetxattr			(__NR_SYSCALL_BASE+227)
+#define __NR_fsetxattr			(__NR_SYSCALL_BASE+228)
+#define __NR_getxattr			(__NR_SYSCALL_BASE+229)
+#define __NR_lgetxattr			(__NR_SYSCALL_BASE+230)
+#define __NR_fgetxattr			(__NR_SYSCALL_BASE+231)
+#define __NR_listxattr			(__NR_SYSCALL_BASE+232)
+#define __NR_llistxattr			(__NR_SYSCALL_BASE+233)
+#define __NR_flistxattr			(__NR_SYSCALL_BASE+234)
+#define __NR_removexattr		(__NR_SYSCALL_BASE+235)
+#define __NR_lremovexattr		(__NR_SYSCALL_BASE+236)
+#define __NR_fremovexattr		(__NR_SYSCALL_BASE+237)
+#define __NR_tkill			(__NR_SYSCALL_BASE+238)
+#define __NR_sendfile64			(__NR_SYSCALL_BASE+239)
+#define __NR_futex			(__NR_SYSCALL_BASE+240)
+#define __NR_sched_setaffinity		(__NR_SYSCALL_BASE+241)
+#define __NR_sched_getaffinity		(__NR_SYSCALL_BASE+242)
+#define __NR_io_setup			(__NR_SYSCALL_BASE+243)
+#define __NR_io_destroy			(__NR_SYSCALL_BASE+244)
+#define __NR_io_getevents		(__NR_SYSCALL_BASE+245)
+#define __NR_io_submit			(__NR_SYSCALL_BASE+246)
+#define __NR_io_cancel			(__NR_SYSCALL_BASE+247)
+#define __NR_exit_group			(__NR_SYSCALL_BASE+248)
+#define __NR_lookup_dcookie		(__NR_SYSCALL_BASE+249)
+#define __NR_epoll_create		(__NR_SYSCALL_BASE+250)
+#define __NR_epoll_ctl			(__NR_SYSCALL_BASE+251)
+#define __NR_epoll_wait			(__NR_SYSCALL_BASE+252)
+#define __NR_remap_file_pages		(__NR_SYSCALL_BASE+253)
+					/* 254 for set_thread_area */
+					/* 255 for get_thread_area */
+#define __NR_set_tid_address		(__NR_SYSCALL_BASE+256)
+#define __NR_timer_create		(__NR_SYSCALL_BASE+257)
+#define __NR_timer_settime		(__NR_SYSCALL_BASE+258)
+#define __NR_timer_gettime		(__NR_SYSCALL_BASE+259)
+#define __NR_timer_getoverrun		(__NR_SYSCALL_BASE+260)
+#define __NR_timer_delete		(__NR_SYSCALL_BASE+261)
+#define __NR_clock_settime		(__NR_SYSCALL_BASE+262)
+#define __NR_clock_gettime		(__NR_SYSCALL_BASE+263)
+#define __NR_clock_getres		(__NR_SYSCALL_BASE+264)
+#define __NR_clock_nanosleep		(__NR_SYSCALL_BASE+265)
+#define __NR_statfs64			(__NR_SYSCALL_BASE+266)
+#define __NR_fstatfs64			(__NR_SYSCALL_BASE+267)
+#define __NR_tgkill			(__NR_SYSCALL_BASE+268)
+#define __NR_utimes			(__NR_SYSCALL_BASE+269)
+#define __NR_arm_fadvise64_64		(__NR_SYSCALL_BASE+270)
+#define __NR_pciconfig_iobase		(__NR_SYSCALL_BASE+271)
+#define __NR_pciconfig_read		(__NR_SYSCALL_BASE+272)
+#define __NR_pciconfig_write		(__NR_SYSCALL_BASE+273)
+#define __NR_mq_open			(__NR_SYSCALL_BASE+274)
+#define __NR_mq_unlink			(__NR_SYSCALL_BASE+275)
+#define __NR_mq_timedsend		(__NR_SYSCALL_BASE+276)
+#define __NR_mq_timedreceive		(__NR_SYSCALL_BASE+277)
+#define __NR_mq_notify			(__NR_SYSCALL_BASE+278)
+#define __NR_mq_getsetattr		(__NR_SYSCALL_BASE+279)
+#define __NR_waitid			(__NR_SYSCALL_BASE+280)
+#define __NR_socket			(__NR_SYSCALL_BASE+281)
+#define __NR_bind			(__NR_SYSCALL_BASE+282)
+#define __NR_connect			(__NR_SYSCALL_BASE+283)
+#define __NR_listen			(__NR_SYSCALL_BASE+284)
+#define __NR_accept			(__NR_SYSCALL_BASE+285)
+#define __NR_getsockname		(__NR_SYSCALL_BASE+286)
+#define __NR_getpeername		(__NR_SYSCALL_BASE+287)
+#define __NR_socketpair			(__NR_SYSCALL_BASE+288)
+#define __NR_send			(__NR_SYSCALL_BASE+289)
+#define __NR_sendto			(__NR_SYSCALL_BASE+290)
+#define __NR_recv			(__NR_SYSCALL_BASE+291)
+#define __NR_recvfrom			(__NR_SYSCALL_BASE+292)
+#define __NR_shutdown			(__NR_SYSCALL_BASE+293)
+#define __NR_setsockopt			(__NR_SYSCALL_BASE+294)
+#define __NR_getsockopt			(__NR_SYSCALL_BASE+295)
+#define __NR_sendmsg			(__NR_SYSCALL_BASE+296)
+#define __NR_recvmsg			(__NR_SYSCALL_BASE+297)
+#define __NR_semop			(__NR_SYSCALL_BASE+298)
+#define __NR_semget			(__NR_SYSCALL_BASE+299)
+#define __NR_semctl			(__NR_SYSCALL_BASE+300)
+#define __NR_msgsnd			(__NR_SYSCALL_BASE+301)
+#define __NR_msgrcv			(__NR_SYSCALL_BASE+302)
+#define __NR_msgget			(__NR_SYSCALL_BASE+303)
+#define __NR_msgctl			(__NR_SYSCALL_BASE+304)
+#define __NR_shmat			(__NR_SYSCALL_BASE+305)
+#define __NR_shmdt			(__NR_SYSCALL_BASE+306)
+#define __NR_shmget			(__NR_SYSCALL_BASE+307)
+#define __NR_shmctl			(__NR_SYSCALL_BASE+308)
+#define __NR_add_key			(__NR_SYSCALL_BASE+309)
+#define __NR_request_key		(__NR_SYSCALL_BASE+310)
+#define __NR_keyctl			(__NR_SYSCALL_BASE+311)
+#define __NR_semtimedop			(__NR_SYSCALL_BASE+312)
+#define __NR_vserver			(__NR_SYSCALL_BASE+313)
+#define __NR_ioprio_set			(__NR_SYSCALL_BASE+314)
+#define __NR_ioprio_get			(__NR_SYSCALL_BASE+315)
+#define __NR_inotify_init		(__NR_SYSCALL_BASE+316)
+#define __NR_inotify_add_watch		(__NR_SYSCALL_BASE+317)
+#define __NR_inotify_rm_watch		(__NR_SYSCALL_BASE+318)
+#define __NR_mbind			(__NR_SYSCALL_BASE+319)
+#define __NR_get_mempolicy		(__NR_SYSCALL_BASE+320)
+#define __NR_set_mempolicy		(__NR_SYSCALL_BASE+321)
+#define __NR_openat			(__NR_SYSCALL_BASE+322)
+#define __NR_mkdirat			(__NR_SYSCALL_BASE+323)
+#define __NR_mknodat			(__NR_SYSCALL_BASE+324)
+#define __NR_fchownat			(__NR_SYSCALL_BASE+325)
+#define __NR_futimesat			(__NR_SYSCALL_BASE+326)
+#define __NR_fstatat64			(__NR_SYSCALL_BASE+327)
+#define __NR_unlinkat			(__NR_SYSCALL_BASE+328)
+#define __NR_renameat			(__NR_SYSCALL_BASE+329)
+#define __NR_linkat			(__NR_SYSCALL_BASE+330)
+#define __NR_symlinkat			(__NR_SYSCALL_BASE+331)
+#define __NR_readlinkat			(__NR_SYSCALL_BASE+332)
+#define __NR_fchmodat			(__NR_SYSCALL_BASE+333)
+#define __NR_faccessat			(__NR_SYSCALL_BASE+334)
+					/* 335 for pselect6 */
+					/* 336 for ppoll */
+#define __NR_unshare			(__NR_SYSCALL_BASE+337)
+#define __NR_set_robust_list		(__NR_SYSCALL_BASE+338)
+#define __NR_get_robust_list		(__NR_SYSCALL_BASE+339)
+#define __NR_splice			(__NR_SYSCALL_BASE+340)
+#define __NR_arm_sync_file_range	(__NR_SYSCALL_BASE+341)
+#define __NR_sync_file_range2		__NR_arm_sync_file_range
+#define __NR_tee			(__NR_SYSCALL_BASE+342)
+#define __NR_vmsplice			(__NR_SYSCALL_BASE+343)
+#define __NR_move_pages			(__NR_SYSCALL_BASE+344)
+#define __NR_getcpu			(__NR_SYSCALL_BASE+345)
+					/* 346 for epoll_pwait */
+#define __NR_kexec_load			(__NR_SYSCALL_BASE+347)
+#define __NR_utimensat			(__NR_SYSCALL_BASE+348)
+#define __NR_signalfd			(__NR_SYSCALL_BASE+349)
+#define __NR_timerfd_create		(__NR_SYSCALL_BASE+350)
+#define __NR_eventfd			(__NR_SYSCALL_BASE+351)
+#define __NR_fallocate			(__NR_SYSCALL_BASE+352)
+#define __NR_timerfd_settime		(__NR_SYSCALL_BASE+353)
+#define __NR_timerfd_gettime		(__NR_SYSCALL_BASE+354)
+#define __NR_signalfd4			(__NR_SYSCALL_BASE+355)
+#define __NR_eventfd2			(__NR_SYSCALL_BASE+356)
+#define __NR_epoll_create1		(__NR_SYSCALL_BASE+357)
+#define __NR_dup3			(__NR_SYSCALL_BASE+358)
+#define __NR_pipe2			(__NR_SYSCALL_BASE+359)
+#define __NR_inotify_init1		(__NR_SYSCALL_BASE+360)
+
+/*
+ * The following SWIs are ARM private.
+ */
+#define __ARM_NR_BASE			(__NR_SYSCALL_BASE+0x0f0000)
+#define __ARM_NR_breakpoint		(__ARM_NR_BASE+1)
+#define __ARM_NR_cacheflush		(__ARM_NR_BASE+2)
+#define __ARM_NR_usr26			(__ARM_NR_BASE+3)
+#define __ARM_NR_usr32			(__ARM_NR_BASE+4)
+#define __ARM_NR_set_tls		(__ARM_NR_BASE+5)
+
+/*
+ * The following syscalls are obsolete and no longer available for EABI.
+ */
+#if defined(__ARM_EABI__) && !defined(__KERNEL__)
+#undef __NR_time
+#undef __NR_umount
+#undef __NR_stime
+#undef __NR_alarm
+#undef __NR_utime
+#undef __NR_getrlimit
+#undef __NR_select
+#undef __NR_readdir
+#undef __NR_mmap
+#undef __NR_socketcall
+#undef __NR_syscall
+#undef __NR_ipc
+#endif
+
+#ifdef __KERNEL__
+
+#define __ARCH_WANT_IPC_PARSE_VERSION
+#define __ARCH_WANT_STAT64
+#define __ARCH_WANT_SYS_GETHOSTNAME
+#define __ARCH_WANT_SYS_PAUSE
+#define __ARCH_WANT_SYS_GETPGRP
+#define __ARCH_WANT_SYS_LLSEEK
+#define __ARCH_WANT_SYS_NICE
+#define __ARCH_WANT_SYS_SIGPENDING
+#define __ARCH_WANT_SYS_SIGPROCMASK
+#define __ARCH_WANT_SYS_RT_SIGACTION
+
+#if !defined(CONFIG_AEABI) || defined(CONFIG_OABI_COMPAT)
+#define __ARCH_WANT_SYS_TIME
+#define __ARCH_WANT_SYS_OLDUMOUNT
+#define __ARCH_WANT_SYS_ALARM
+#define __ARCH_WANT_SYS_UTIME
+#define __ARCH_WANT_SYS_OLD_GETRLIMIT
+#define __ARCH_WANT_OLD_READDIR
+#define __ARCH_WANT_SYS_SOCKETCALL
+#endif
+
+/*
+ * "Conditional" syscalls
+ *
+ * What we want is __attribute__((weak,alias("sys_ni_syscall"))),
+ * but it doesn't work on all toolchains, so we just do it by hand
+ */
+#define cond_syscall(x) asm(".weak\t" #x "\n\t.set\t" #x ",sys_ni_syscall")
+
+/*
+ * Unimplemented (or alternatively implemented) syscalls
+ */
+#define __IGNORE_fadvise64_64		1
+
+#endif /* __KERNEL__ */
+#endif /* __ASM_ARM_UNISTD_H */
diff --git a/include/asm-arm/user.h b/arch/arm/include/asm/user.h
index 825c1e7c582d..825c1e7c582d 100644
--- a/include/asm-arm/user.h
+++ b/arch/arm/include/asm/user.h
diff --git a/include/asm-arm/vfp.h b/arch/arm/include/asm/vfp.h
index 5f9a2cb3d452..f4ab34fd4f72 100644
--- a/include/asm-arm/vfp.h
+++ b/arch/arm/include/asm/vfp.h
@@ -1,5 +1,5 @@
 /*
- * linux/include/asm-arm/vfp.h
+ * arch/arm/include/asm/vfp.h
  *
  * VFP register definitions.
  * First, the standard VFP set.
diff --git a/include/asm-arm/vfpmacros.h b/arch/arm/include/asm/vfpmacros.h
index cccb3892e73c..422f3cc204a2 100644
--- a/include/asm-arm/vfpmacros.h
+++ b/arch/arm/include/asm/vfpmacros.h
@@ -1,5 +1,5 @@
 /*
- * linux/include/asm-arm/vfpmacros.h
+ * arch/arm/include/asm/vfpmacros.h
  *
  * Assembler-only file containing VFP macros and register definitions.
  */
diff --git a/arch/arm/include/asm/vga.h b/arch/arm/include/asm/vga.h
new file mode 100644
index 000000000000..6a3cd2a2f670
--- /dev/null
+++ b/arch/arm/include/asm/vga.h
@@ -0,0 +1,12 @@
+#ifndef ASMARM_VGA_H
+#define ASMARM_VGA_H
+
+#include <mach/hardware.h>
+#include <asm/io.h>
+
+#define VGA_MAP_MEM(x,s)	(PCIMEM_BASE + (x))
+
+#define vga_readb(x)	(*((volatile unsigned char *)x))
+#define vga_writeb(x,y)	(*((volatile unsigned char *)y) = (x))
+
+#endif
diff --git a/arch/arm/include/asm/xor.h b/arch/arm/include/asm/xor.h
new file mode 100644
index 000000000000..7604673dc427
--- /dev/null
+++ b/arch/arm/include/asm/xor.h
@@ -0,0 +1,141 @@
+/*
+ *  arch/arm/include/asm/xor.h
+ *
+ *  Copyright (C) 2001 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <asm-generic/xor.h>
+
+#define __XOR(a1, a2) a1 ^= a2
+
+#define GET_BLOCK_2(dst) \
+	__asm__("ldmia	%0, {%1, %2}" \
+		: "=r" (dst), "=r" (a1), "=r" (a2) \
+		: "0" (dst))
+
+#define GET_BLOCK_4(dst) \
+	__asm__("ldmia	%0, {%1, %2, %3, %4}" \
+		: "=r" (dst), "=r" (a1), "=r" (a2), "=r" (a3), "=r" (a4) \
+		: "0" (dst))
+
+#define XOR_BLOCK_2(src) \
+	__asm__("ldmia	%0!, {%1, %2}" \
+		: "=r" (src), "=r" (b1), "=r" (b2) \
+		: "0" (src)); \
+	__XOR(a1, b1); __XOR(a2, b2);
+
+#define XOR_BLOCK_4(src) \
+	__asm__("ldmia	%0!, {%1, %2, %3, %4}" \
+		: "=r" (src), "=r" (b1), "=r" (b2), "=r" (b3), "=r" (b4) \
+		: "0" (src)); \
+	__XOR(a1, b1); __XOR(a2, b2); __XOR(a3, b3); __XOR(a4, b4)
+
+#define PUT_BLOCK_2(dst) \
+	__asm__ __volatile__("stmia	%0!, {%2, %3}" \
+		: "=r" (dst) \
+		: "0" (dst), "r" (a1), "r" (a2))
+
+#define PUT_BLOCK_4(dst) \
+	__asm__ __volatile__("stmia	%0!, {%2, %3, %4, %5}" \
+		: "=r" (dst) \
+		: "0" (dst), "r" (a1), "r" (a2), "r" (a3), "r" (a4))
+
+static void
+xor_arm4regs_2(unsigned long bytes, unsigned long *p1, unsigned long *p2)
+{
+	unsigned int lines = bytes / sizeof(unsigned long) / 4;
+	register unsigned int a1 __asm__("r4");
+	register unsigned int a2 __asm__("r5");
+	register unsigned int a3 __asm__("r6");
+	register unsigned int a4 __asm__("r7");
+	register unsigned int b1 __asm__("r8");
+	register unsigned int b2 __asm__("r9");
+	register unsigned int b3 __asm__("ip");
+	register unsigned int b4 __asm__("lr");
+
+	do {
+		GET_BLOCK_4(p1);
+		XOR_BLOCK_4(p2);
+		PUT_BLOCK_4(p1);
+	} while (--lines);
+}
+
+static void
+xor_arm4regs_3(unsigned long bytes, unsigned long *p1, unsigned long *p2,
+		unsigned long *p3)
+{
+	unsigned int lines = bytes / sizeof(unsigned long) / 4;
+	register unsigned int a1 __asm__("r4");
+	register unsigned int a2 __asm__("r5");
+	register unsigned int a3 __asm__("r6");
+	register unsigned int a4 __asm__("r7");
+	register unsigned int b1 __asm__("r8");
+	register unsigned int b2 __asm__("r9");
+	register unsigned int b3 __asm__("ip");
+	register unsigned int b4 __asm__("lr");
+
+	do {
+		GET_BLOCK_4(p1);
+		XOR_BLOCK_4(p2);
+		XOR_BLOCK_4(p3);
+		PUT_BLOCK_4(p1);
+	} while (--lines);
+}
+
+static void
+xor_arm4regs_4(unsigned long bytes, unsigned long *p1, unsigned long *p2,
+		unsigned long *p3, unsigned long *p4)
+{
+	unsigned int lines = bytes / sizeof(unsigned long) / 2;
+	register unsigned int a1 __asm__("r8");
+	register unsigned int a2 __asm__("r9");
+	register unsigned int b1 __asm__("ip");
+	register unsigned int b2 __asm__("lr");
+
+	do {
+		GET_BLOCK_2(p1);
+		XOR_BLOCK_2(p2);
+		XOR_BLOCK_2(p3);
+		XOR_BLOCK_2(p4);
+		PUT_BLOCK_2(p1);
+	} while (--lines);
+}
+
+static void
+xor_arm4regs_5(unsigned long bytes, unsigned long *p1, unsigned long *p2,
+		unsigned long *p3, unsigned long *p4, unsigned long *p5)
+{
+	unsigned int lines = bytes / sizeof(unsigned long) / 2;
+	register unsigned int a1 __asm__("r8");
+	register unsigned int a2 __asm__("r9");
+	register unsigned int b1 __asm__("ip");
+	register unsigned int b2 __asm__("lr");
+
+	do {
+		GET_BLOCK_2(p1);
+		XOR_BLOCK_2(p2);
+		XOR_BLOCK_2(p3);
+		XOR_BLOCK_2(p4);
+		XOR_BLOCK_2(p5);
+		PUT_BLOCK_2(p1);
+	} while (--lines);
+}
+
+static struct xor_block_template xor_block_arm4regs = {
+	.name	= "arm4regs",
+	.do_2	= xor_arm4regs_2,
+	.do_3	= xor_arm4regs_3,
+	.do_4	= xor_arm4regs_4,
+	.do_5	= xor_arm4regs_5,
+};
+
+#undef XOR_TRY_TEMPLATES
+#define XOR_TRY_TEMPLATES			\
+	do {					\
+		xor_speed(&xor_block_arm4regs);	\
+		xor_speed(&xor_block_8regs);	\
+		xor_speed(&xor_block_32regs);	\
+	} while (0)
diff --git a/arch/arm/kernel/.gitignore b/arch/arm/kernel/.gitignore
new file mode 100644
index 000000000000..c5f676c3c224
--- /dev/null
+++ b/arch/arm/kernel/.gitignore
@@ -0,0 +1 @@
+vmlinux.lds
diff --git a/arch/arm/kernel/calls.S b/arch/arm/kernel/calls.S
index 30a67a5a40a8..09a061cb7838 100644
--- a/arch/arm/kernel/calls.S
+++ b/arch/arm/kernel/calls.S
@@ -262,10 +262,10 @@
 /* 250 */	CALL(sys_epoll_create)
 		CALL(ABI(sys_epoll_ctl, sys_oabi_epoll_ctl))
 		CALL(ABI(sys_epoll_wait, sys_oabi_epoll_wait))
-	 	CALL(sys_remap_file_pages)
+		CALL(sys_remap_file_pages)
 		CALL(sys_ni_syscall)	/* sys_set_thread_area */
 /* 255 */	CALL(sys_ni_syscall)	/* sys_get_thread_area */
- 		CALL(sys_set_tid_address)
+		CALL(sys_set_tid_address)
 		CALL(sys_timer_create)
 		CALL(sys_timer_settime)
 		CALL(sys_timer_gettime)
@@ -364,6 +364,12 @@
 		CALL(sys_fallocate)
 		CALL(sys_timerfd_settime)
 		CALL(sys_timerfd_gettime)
+/* 355 */	CALL(sys_signalfd4)
+		CALL(sys_eventfd2)
+		CALL(sys_epoll_create1)
+		CALL(sys_dup3)
+		CALL(sys_pipe2)
+/* 360 */	CALL(sys_inotify_init1)
 #ifndef syscalls_counted
 .equ syscalls_padding, ((NR_syscalls + 3) & ~3) - NR_syscalls
 #define syscalls_counted
diff --git a/arch/arm/kernel/crunch-bits.S b/arch/arm/kernel/crunch-bits.S
index a26886758c67..0ec9bb48fab9 100644
--- a/arch/arm/kernel/crunch-bits.S
+++ b/arch/arm/kernel/crunch-bits.S
@@ -16,7 +16,7 @@
 #include <asm/ptrace.h>
 #include <asm/thread_info.h>
 #include <asm/asm-offsets.h>
-#include <asm/arch/ep93xx-regs.h>
+#include <mach/ep93xx-regs.h>
 
 /*
  * We can't use hex constants here due to a bug in gas.
diff --git a/arch/arm/kernel/crunch.c b/arch/arm/kernel/crunch.c
index 627d79414c9d..3b6a1c293ee4 100644
--- a/arch/arm/kernel/crunch.c
+++ b/arch/arm/kernel/crunch.c
@@ -15,7 +15,7 @@
 #include <linux/signal.h>
 #include <linux/sched.h>
 #include <linux/init.h>
-#include <asm/arch/ep93xx-regs.h>
+#include <mach/ep93xx-regs.h>
 #include <asm/thread_notify.h>
 #include <asm/io.h>
 
diff --git a/arch/arm/kernel/debug.S b/arch/arm/kernel/debug.S
index 5617566477b4..9550ff0ddde4 100644
--- a/arch/arm/kernel/debug.S
+++ b/arch/arm/kernel/debug.S
@@ -80,7 +80,7 @@
 #endif	/* CONFIG_CPU_V6 */
 
 #else
-#include <asm/arch/debug-macro.S>
+#include <mach/debug-macro.S>
 #endif	/* CONFIG_DEBUG_ICEDCC */
 
 /*
diff --git a/arch/arm/kernel/ecard.c b/arch/arm/kernel/ecard.c
index f5cfdabcb87d..7a50575a8d4d 100644
--- a/arch/arm/kernel/ecard.c
+++ b/arch/arm/kernel/ecard.c
@@ -46,7 +46,7 @@
 
 #include <asm/dma.h>
 #include <asm/ecard.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/irq.h>
 #include <asm/mmu_context.h>
 #include <asm/mach/irq.h>
diff --git a/arch/arm/kernel/entry-armv.S b/arch/arm/kernel/entry-armv.S
index 7dca225752c1..617e509d60df 100644
--- a/arch/arm/kernel/entry-armv.S
+++ b/arch/arm/kernel/entry-armv.S
@@ -18,7 +18,7 @@
 #include <asm/memory.h>
 #include <asm/glue.h>
 #include <asm/vfpmacros.h>
-#include <asm/arch/entry-macro.S>
+#include <mach/entry-macro.S>
 #include <asm/thread_notify.h>
 
 #include "entry-header.S"
diff --git a/arch/arm/kernel/entry-common.S b/arch/arm/kernel/entry-common.S
index 84694e88b428..060d7e2e9f64 100644
--- a/arch/arm/kernel/entry-common.S
+++ b/arch/arm/kernel/entry-common.S
@@ -10,7 +10,7 @@
 
 #include <asm/unistd.h>
 #include <asm/ftrace.h>
-#include <asm/arch/entry-macro.S>
+#include <mach/entry-macro.S>
 
 #include "entry-header.S"
 
diff --git a/arch/arm/kernel/head-common.S b/arch/arm/kernel/head-common.S
index 7e9c00a8a412..1c3c6ea5f9e7 100644
--- a/arch/arm/kernel/head-common.S
+++ b/arch/arm/kernel/head-common.S
@@ -181,7 +181,7 @@ ENTRY(lookup_processor_type)
 	ldmfd	sp!, {r4 - r7, r9, pc}
 
 /*
- * Look in include/asm-arm/procinfo.h and arch/arm/kernel/arch.[ch] for
+ * Look in <asm/procinfo.h> and arch/arm/kernel/arch.[ch] for
  * more information about the __proc_info and __arch_info structures.
  */
 	.long	__proc_info_begin
diff --git a/arch/arm/kernel/head-nommu.S b/arch/arm/kernel/head-nommu.S
index 5d78ffb8a9a7..27329bd32037 100644
--- a/arch/arm/kernel/head-nommu.S
+++ b/arch/arm/kernel/head-nommu.S
@@ -15,7 +15,6 @@
 #include <linux/init.h>
 
 #include <asm/assembler.h>
-#include <asm/mach-types.h>
 #include <asm/ptrace.h>
 #include <asm/asm-offsets.h>
 #include <asm/thread_info.h>
diff --git a/arch/arm/kernel/irq.c b/arch/arm/kernel/irq.c
index 11dcd52e51be..f88efb135b70 100644
--- a/arch/arm/kernel/irq.c
+++ b/arch/arm/kernel/irq.c
@@ -38,6 +38,7 @@
 #include <linux/proc_fs.h>
 
 #include <asm/system.h>
+#include <asm/mach/irq.h>
 #include <asm/mach/time.h>
 
 /*
diff --git a/arch/arm/kernel/kprobes.c b/arch/arm/kernel/kprobes.c
index 5ee39e10c8d1..d28513f14d05 100644
--- a/arch/arm/kernel/kprobes.c
+++ b/arch/arm/kernel/kprobes.c
@@ -296,8 +296,7 @@ static __used __kprobes void *trampoline_handler(struct pt_regs *regs)
 	unsigned long trampoline_address = (unsigned long)&kretprobe_trampoline;
 
 	INIT_HLIST_HEAD(&empty_rp);
-	spin_lock_irqsave(&kretprobe_lock, flags);
-	head = kretprobe_inst_table_head(current);
+	kretprobe_hash_lock(current, &head, &flags);
 
 	/*
 	 * It is possible to have multiple instances associated with a given
@@ -337,7 +336,7 @@ static __used __kprobes void *trampoline_handler(struct pt_regs *regs)
 	}
 
 	kretprobe_assert(ri, orig_ret_address, trampoline_address);
-	spin_unlock_irqrestore(&kretprobe_lock, flags);
+	kretprobe_hash_unlock(current, &flags);
 
 	hlist_for_each_entry_safe(ri, node, tmp, &empty_rp, hlist) {
 		hlist_del(&ri->hlist);
@@ -347,7 +346,6 @@ static __used __kprobes void *trampoline_handler(struct pt_regs *regs)
 	return (void *)orig_ret_address;
 }
 
-/* Called with kretprobe_lock held. */
 void __kprobes arch_prepare_kretprobe(struct kretprobe_instance *ri,
 				      struct pt_regs *regs)
 {
diff --git a/arch/arm/kernel/machine_kexec.c b/arch/arm/kernel/machine_kexec.c
index db8f54a3451f..fae5beb3c3d6 100644
--- a/arch/arm/kernel/machine_kexec.c
+++ b/arch/arm/kernel/machine_kexec.c
@@ -71,7 +71,7 @@ void machine_kexec(struct kimage *image)
 
 
 	flush_icache_range((unsigned long) reboot_code_buffer,
-			   (unsigned long) reboot_code_buffer + KEXEC_CONTROL_CODE_SIZE);
+			   (unsigned long) reboot_code_buffer + KEXEC_CONTROL_PAGE_SIZE);
 	printk(KERN_INFO "Bye!\n");
 
 	cpu_proc_fin();
diff --git a/arch/arm/kernel/process.c b/arch/arm/kernel/process.c
index 89bfded70a1f..3fd882337064 100644
--- a/arch/arm/kernel/process.c
+++ b/arch/arm/kernel/process.c
@@ -51,7 +51,7 @@ extern void setup_mm_for_reboot(char mode);
 
 static volatile int hlt_counter;
 
-#include <asm/arch/system.h>
+#include <mach/system.h>
 
 void disable_hlt(void)
 {
diff --git a/arch/arm/kernel/setup.c b/arch/arm/kernel/setup.c
index 38f0e7940a13..2ca7038b67a7 100644
--- a/arch/arm/kernel/setup.c
+++ b/arch/arm/kernel/setup.c
@@ -81,6 +81,8 @@ EXPORT_SYMBOL(system_serial_high);
 unsigned int elf_hwcap;
 EXPORT_SYMBOL(elf_hwcap);
 
+unsigned long __initdata vmalloc_reserve = 128 << 20;
+
 
 #ifdef MULTI_CPU
 struct processor processor;
@@ -501,6 +503,17 @@ static void __init early_mem(char **p)
 __early_param("mem=", early_mem);
 
 /*
+ * vmalloc=size forces the vmalloc area to be exactly 'size'
+ * bytes. This can be used to increase (or decrease) the vmalloc
+ * area - the default is 128m.
+ */
+static void __init early_vmalloc(char **arg)
+{
+	vmalloc_reserve = memparse(*arg, arg);
+}
+__early_param("vmalloc=", early_vmalloc);
+
+/*
  * Initial parsing of the command line.
  */
 static void __init parse_cmdline(char **cmdline_p, char *from)
diff --git a/arch/arm/kernel/smp.c b/arch/arm/kernel/smp.c
index 5a7c09564d13..e9842f6767f9 100644
--- a/arch/arm/kernel/smp.c
+++ b/arch/arm/kernel/smp.c
@@ -100,7 +100,7 @@ int __cpuinit __cpu_up(unsigned int cpu)
 	 * a 1:1 mapping for the physical address of the kernel.
 	 */
 	pgd = pgd_alloc(&init_mm);
-	pmd = pmd_offset(pgd, PHYS_OFFSET);
+	pmd = pmd_offset(pgd + pgd_index(PHYS_OFFSET), PHYS_OFFSET);
 	*pmd = __pmd((PHYS_OFFSET & PGDIR_MASK) |
 		     PMD_TYPE_SECT | PMD_SECT_AP_WRITE);
 
@@ -139,7 +139,7 @@ int __cpuinit __cpu_up(unsigned int cpu)
 	secondary_data.stack = NULL;
 	secondary_data.pgdir = 0;
 
-	*pmd_offset(pgd, PHYS_OFFSET) = __pmd(0);
+	*pmd = __pmd(0);
 	pgd_free(&init_mm, pgd);
 
 	if (ret) {
diff --git a/arch/arm/kernel/traps.c b/arch/arm/kernel/traps.c
index 7277aef83098..872f1f8fbb57 100644
--- a/arch/arm/kernel/traps.c
+++ b/arch/arm/kernel/traps.c
@@ -288,14 +288,28 @@ void unregister_undef_hook(struct undef_hook *hook)
 	spin_unlock_irqrestore(&undef_lock, flags);
 }
 
+static int call_undef_hook(struct pt_regs *regs, unsigned int instr)
+{
+	struct undef_hook *hook;
+	unsigned long flags;
+	int (*fn)(struct pt_regs *regs, unsigned int instr) = NULL;
+
+	spin_lock_irqsave(&undef_lock, flags);
+	list_for_each_entry(hook, &undef_hook, node)
+		if ((instr & hook->instr_mask) == hook->instr_val &&
+		    (regs->ARM_cpsr & hook->cpsr_mask) == hook->cpsr_val)
+			fn = hook->fn;
+	spin_unlock_irqrestore(&undef_lock, flags);
+
+	return fn ? fn(regs, instr) : 1;
+}
+
 asmlinkage void __exception do_undefinstr(struct pt_regs *regs)
 {
 	unsigned int correction = thumb_mode(regs) ? 2 : 4;
 	unsigned int instr;
-	struct undef_hook *hook;
 	siginfo_t info;
 	void __user *pc;
-	unsigned long flags;
 
 	/*
 	 * According to the ARM ARM, PC is 2 or 4 bytes ahead,
@@ -325,17 +339,8 @@ asmlinkage void __exception do_undefinstr(struct pt_regs *regs)
 	}
 #endif
 
-	spin_lock_irqsave(&undef_lock, flags);
-	list_for_each_entry(hook, &undef_hook, node) {
-		if ((instr & hook->instr_mask) == hook->instr_val &&
-		    (regs->ARM_cpsr & hook->cpsr_mask) == hook->cpsr_val) {
-			if (hook->fn(regs, instr) == 0) {
-				spin_unlock_irqrestore(&undef_lock, flags);
-				return;
-			}
-		}
-	}
-	spin_unlock_irqrestore(&undef_lock, flags);
+	if (call_undef_hook(regs, instr) == 0)
+		return;
 
 #ifdef CONFIG_DEBUG_USER
 	if (user_debug & UDBG_UNDEFINED) {
diff --git a/arch/arm/lib/ecard.S b/arch/arm/lib/ecard.S
index c55aaa2a2088..8678eb2b7a60 100644
--- a/arch/arm/lib/ecard.S
+++ b/arch/arm/lib/ecard.S
@@ -12,7 +12,7 @@
  */
 #include <linux/linkage.h>
 #include <asm/assembler.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 
 #define CPSR2SPSR(rt) \
 		mrs	rt, cpsr; \
diff --git a/arch/arm/lib/getuser.S b/arch/arm/lib/getuser.S
index 1dd8ea4f9a9c..2034d4dbe6ad 100644
--- a/arch/arm/lib/getuser.S
+++ b/arch/arm/lib/getuser.S
@@ -20,7 +20,7 @@
  *		r2, r3 contains the zero-extended value
  *		lr corrupted
  *
- * No other registers must be altered.  (see include/asm-arm/uaccess.h
+ * No other registers must be altered.  (see <asm/uaccess.h>
  * for specific ASM register usage).
  *
  * Note that ADDR_LIMIT is either 0 or 0xc0000000.
diff --git a/arch/arm/lib/io-readsw-armv3.S b/arch/arm/lib/io-readsw-armv3.S
index 4ef904185142..9aaf7c72065d 100644
--- a/arch/arm/lib/io-readsw-armv3.S
+++ b/arch/arm/lib/io-readsw-armv3.S
@@ -9,7 +9,7 @@
  */
 #include <linux/linkage.h>
 #include <asm/assembler.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 
 .Linsw_bad_alignment:
 		adr	r0, .Linsw_bad_align_msg
diff --git a/arch/arm/lib/io-writesw-armv3.S b/arch/arm/lib/io-writesw-armv3.S
index 1607a29f49b7..cd34503e424d 100644
--- a/arch/arm/lib/io-writesw-armv3.S
+++ b/arch/arm/lib/io-writesw-armv3.S
@@ -9,7 +9,7 @@
  */
 #include <linux/linkage.h>
 #include <asm/assembler.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 
 .Loutsw_bad_alignment:
 		adr	r0, .Loutsw_bad_align_msg
diff --git a/arch/arm/lib/putuser.S b/arch/arm/lib/putuser.S
index 8620afe54f72..08ec7dffa52e 100644
--- a/arch/arm/lib/putuser.S
+++ b/arch/arm/lib/putuser.S
@@ -20,7 +20,7 @@
  * Outputs:	r0 is the error code
  *		lr corrupted
  *
- * No other registers must be altered.  (see include/asm-arm/uaccess.h
+ * No other registers must be altered.  (see <asm/uaccess.h>
  * for specific ASM register usage).
  *
  * Note that ADDR_LIMIT is either 0 or 0xc0000000
diff --git a/arch/arm/lib/sha1.S b/arch/arm/lib/sha1.S
index ff6ece487ffc..67c2bf4774b7 100644
--- a/arch/arm/lib/sha1.S
+++ b/arch/arm/lib/sha1.S
@@ -29,7 +29,7 @@ ENTRY(sha_transform)
 	stmfd	sp!, {r4 - r8, lr}
 
 	@ for (i = 0; i < 16; i++)
-	@         W[i] = be32_to_cpu(in[i]); */
+	@         W[i] = be32_to_cpu(in[i]);
 
 #ifdef __ARMEB__
 	mov	r4, r0
diff --git a/arch/arm/mach-aaec2000/aaed2000.c b/arch/arm/mach-aaec2000/aaed2000.c
index 83f57da3184c..81a3ecc0d104 100644
--- a/arch/arm/mach-aaec2000/aaed2000.c
+++ b/arch/arm/mach-aaec2000/aaed2000.c
@@ -20,14 +20,14 @@
 #include <asm/setup.h>
 #include <asm/memory.h>
 #include <asm/mach-types.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/irq.h>
 
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
-#include <asm/arch/aaed2000.h>
+#include <mach/aaed2000.h>
 
 #include "core.h"
 
diff --git a/arch/arm/mach-aaec2000/core.c b/arch/arm/mach-aaec2000/core.c
index b016be2b0e35..dfb26bc23d1a 100644
--- a/arch/arm/mach-aaec2000/core.c
+++ b/arch/arm/mach-aaec2000/core.c
@@ -20,7 +20,7 @@
 #include <linux/timex.h>
 #include <linux/signal.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/irq.h>
 #include <asm/sizes.h>
 
diff --git a/include/asm-arm/arch-aaec2000/aaec2000.h b/arch/arm/mach-aaec2000/include/mach/aaec2000.h
index a6d1ee0980f2..bc729c42f843 100644
--- a/include/asm-arm/arch-aaec2000/aaec2000.h
+++ b/arch/arm/mach-aaec2000/include/mach/aaec2000.h
@@ -1,5 +1,5 @@
 /*
- *  linux/include/asm-arm/arch-aaec2000/aaec2000.h
+ *  arch/arm/mach-aaec2000/include/mach/aaec2000.h
  *
  *  AAEC-2000 registers definition
  *
diff --git a/include/asm-arm/arch-aaec2000/aaed2000.h b/arch/arm/mach-aaec2000/include/mach/aaed2000.h
index bc76d2badb91..f821295ca71b 100644
--- a/include/asm-arm/arch-aaec2000/aaed2000.h
+++ b/arch/arm/mach-aaec2000/include/mach/aaed2000.h
@@ -1,5 +1,5 @@
 /*
- *  linux/include/asm-arm/arch-aaec2000/aaed2000.h
+ *  arch/arm/mach-aaec2000/include/mach/aaed2000.h
  *
  *  AAED-2000 specific bits definition
  *
diff --git a/arch/arm/mach-aaec2000/include/mach/debug-macro.S b/arch/arm/mach-aaec2000/include/mach/debug-macro.S
new file mode 100644
index 000000000000..0b6351d7c389
--- /dev/null
+++ b/arch/arm/mach-aaec2000/include/mach/debug-macro.S
@@ -0,0 +1,37 @@
+/*  arch/arm/mach-aaec2000/include/mach/debug-macro.S
+ *
+ *  Debugging macro include header
+ *
+ *  Copyright (c) 2005 Nicolas Bellido Y Ortega
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation.
+ */
+
+#include "hardware.h"
+		.macro	addruart,rx
+		mrc	p15, 0, \rx, c1, c0
+		tst	\rx, #1			@ MMU enabled?
+		moveq	\rx, #0x80000000		@ physical
+		movne	\rx, #io_p2v(0x80000000)	@ virtual
+		orr	\rx, \rx, #0x00000800
+		.endm
+
+		.macro	senduart,rd,rx
+		str	\rd, [\rx, #0]
+		.endm
+
+		.macro	busyuart,rd,rx
+1002:		ldr	\rd, [\rx, #0x10]
+		tst	\rd, #(1 << 7)
+		beq	1002b
+		.endm
+
+		.macro	waituart,rd,rx
+#if 0
+1001:		ldr	\rd, [\rx, #0x10]
+		tst	\rd, #(1 << 5)
+		beq	1001b
+#endif
+		.endm
diff --git a/arch/arm/mach-aaec2000/include/mach/dma.h b/arch/arm/mach-aaec2000/include/mach/dma.h
new file mode 100644
index 000000000000..2da846c72fe7
--- /dev/null
+++ b/arch/arm/mach-aaec2000/include/mach/dma.h
@@ -0,0 +1,9 @@
+/*
+ *  arch/arm/mach-aaec2000/include/mach/dma.h
+ *
+ *  Copyright (c) 2005 Nicolas Bellido Y Ortega
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation.
+ */
diff --git a/arch/arm/mach-aaec2000/include/mach/entry-macro.S b/arch/arm/mach-aaec2000/include/mach/entry-macro.S
new file mode 100644
index 000000000000..c8fb34469007
--- /dev/null
+++ b/arch/arm/mach-aaec2000/include/mach/entry-macro.S
@@ -0,0 +1,40 @@
+/*
+ *  arch/arm/mach-aaec2000/include/mach/entry-macro.S
+ *
+ *  Low-level IRQ helper for aaec-2000 based platforms
+ *
+ *  Copyright (c) 2005 Nicolas Bellido Y Ortega
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation.
+ *
+ */
+#include <mach/irqs.h>
+
+		.macro	disable_fiq
+		.endm
+
+		.macro  get_irqnr_preamble, base, tmp
+		.endm
+
+		.macro  arch_ret_to_user, tmp1, tmp2
+		.endm
+
+		.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
+		mov	r4, #0xf8000000
+		add	r4, r4, #0x00000500
+		mov	\base, r4
+		ldr	\irqstat, [\base, #0]
+		cmp	\irqstat, #0
+		bne	1001f
+		ldr	\irqnr, =NR_IRQS+1
+		b       1003f
+1001:		mov	\irqnr, #0
+1002:		ands	\tmp, \irqstat, #1
+		mov	\irqstat, \irqstat, LSR #1
+		add	\irqnr, \irqnr, #1
+		beq	1002b
+		sub	\irqnr, \irqnr, #1
+1003:
+		.endm
diff --git a/arch/arm/mach-aaec2000/include/mach/hardware.h b/arch/arm/mach-aaec2000/include/mach/hardware.h
new file mode 100644
index 000000000000..965a6f6672d6
--- /dev/null
+++ b/arch/arm/mach-aaec2000/include/mach/hardware.h
@@ -0,0 +1,50 @@
+/*
+ *  arch/arm/mach-aaec2000/include/mach/hardware.h
+ *
+ *  Copyright (c) 2005 Nicolas Bellido Y Ortega
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_HARDWARE_H
+#define __ASM_ARCH_HARDWARE_H
+
+#include <asm/sizes.h>
+#include <mach/aaec2000.h>
+
+/* The kernel is loaded at physical address 0xf8000000.
+ * We map the IO space a bit after
+ */
+#define PIO_APB_BASE	0x80000000
+#define VIO_APB_BASE	0xf8000000
+#define IO_APB_LENGTH	0x2000
+#define PIO_AHB_BASE	0x80002000
+#define VIO_AHB_BASE	0xf8002000
+#define IO_AHB_LENGTH	0x2000
+
+#define VIO_BASE    VIO_APB_BASE
+#define PIO_BASE    PIO_APB_BASE
+
+#define io_p2v(x) ( (x) - PIO_BASE + VIO_BASE )
+#define io_v2p(x) ( (x) + PIO_BASE - VIO_BASE )
+
+#ifndef __ASSEMBLY__
+
+#include <asm/types.h>
+
+/* FIXME: Is it needed to optimize this a la pxa ?? */
+#define __REG(x)    (*((volatile u32 *)io_p2v(x)))
+#define __PREG(x)   (io_v2p((u32)&(x)))
+
+#else /* __ASSEMBLY__ */
+
+#define __REG(x)    io_p2v(x)
+#define __PREG(x)   io_v2p(x)
+
+#endif
+
+#include "aaec2000.h"
+
+#endif /* __ASM_ARCH_HARDWARE_H */
diff --git a/arch/arm/mach-aaec2000/include/mach/io.h b/arch/arm/mach-aaec2000/include/mach/io.h
new file mode 100644
index 000000000000..c87c24de1110
--- /dev/null
+++ b/arch/arm/mach-aaec2000/include/mach/io.h
@@ -0,0 +1,20 @@
+/*
+ *  arch/arm/mach-aaec2000/include/mach/io.h
+ *
+ *  Copied from asm/arch/sa1100/io.h
+ */
+#ifndef __ASM_ARM_ARCH_IO_H
+#define __ASM_ARM_ARCH_IO_H
+
+#include <mach/hardware.h>
+
+#define IO_SPACE_LIMIT 0xffffffff
+
+/*
+ * We don't actually have real ISA nor PCI buses, but there is so many
+ * drivers out there that might just work if we fake them...
+ */
+#define __io(a)			((void __iomem *)(a))
+#define __mem_pci(a)		(a)
+
+#endif
diff --git a/arch/arm/mach-aaec2000/include/mach/irqs.h b/arch/arm/mach-aaec2000/include/mach/irqs.h
new file mode 100644
index 000000000000..bf45c6d2f294
--- /dev/null
+++ b/arch/arm/mach-aaec2000/include/mach/irqs.h
@@ -0,0 +1,46 @@
+/*
+ *  arch/arm/mach-aaec2000/include/mach/irqs.h
+ *
+ *  Copyright (c) 2005 Nicolas Bellido Y Ortega
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_IRQS_H
+#define __ASM_ARCH_IRQS_H
+
+
+#define INT_GPIOF0_FIQ	0  /* External GPIO Port F O Fast Interrupt Input */
+#define INT_BL_FIQ	1  /* Battery Low Fast Interrupt */
+#define INT_WE_FIQ	2  /* Watchdog Expired Fast Interrupt */
+#define INT_MV_FIQ	3  /* Media Changed Interrupt */
+#define INT_SC		4  /* Sound Codec Interrupt */
+#define INT_GPIO1	5  /* GPIO Port F Configurable Int 1 */
+#define INT_GPIO2	6  /* GPIO Port F Configurable Int 2 */
+#define INT_GPIO3	7  /* GPIO Port F Configurable Int 3 */
+#define INT_TMR1_OFL	8  /* Timer 1 Overflow Interrupt */
+#define INT_TMR2_OFL	9  /* Timer 2 Overflow Interrupt */
+#define INT_RTC_CM	10 /* RTC Compare Match Interrupt */
+#define INT_TICK	11 /* 64Hz Tick Interrupt */
+#define INT_UART1	12 /* UART1 Interrupt */
+#define INT_UART2	13 /* UART2 & Modem State Changed Interrupt */
+#define INT_LCD		14 /* LCD Interrupt */
+#define INT_SSI		15 /* SSI End of Transfer Interrupt */
+#define INT_UART3	16 /* UART3 Interrupt */
+#define INT_SCI		17 /* SCI Interrupt */
+#define INT_AAC		18 /* Advanced Audio Codec Interrupt */
+#define INT_MMC		19 /* MMC Interrupt */
+#define INT_USB		20 /* USB Interrupt */
+#define INT_DMA		21 /* DMA Interrupt */
+#define INT_TMR3_UOFL	22 /* Timer 3 Underflow Interrupt */
+#define INT_GPIO4	23 /* GPIO Port F Configurable Int 4 */
+#define INT_GPIO5	24 /* GPIO Port F Configurable Int 4 */
+#define INT_GPIO6	25 /* GPIO Port F Configurable Int 4 */
+#define INT_GPIO7	26 /* GPIO Port F Configurable Int 4 */
+#define INT_BMI		27 /* BMI Interrupt */
+
+#define NR_IRQS		(INT_BMI + 1)
+
+#endif /* __ASM_ARCH_IRQS_H */
diff --git a/arch/arm/mach-aaec2000/include/mach/memory.h b/arch/arm/mach-aaec2000/include/mach/memory.h
new file mode 100644
index 000000000000..56ae900a482e
--- /dev/null
+++ b/arch/arm/mach-aaec2000/include/mach/memory.h
@@ -0,0 +1,30 @@
+/*
+ *  arch/arm/mach-aaec2000/include/mach/memory.h
+ *
+ *  Copyright (c) 2005 Nicolas Bellido Y Ortega
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_MEMORY_H
+#define __ASM_ARCH_MEMORY_H
+
+
+#define PHYS_OFFSET	UL(0xf0000000)
+
+#define __virt_to_bus(x)	__virt_to_phys(x)
+#define __bus_to_virt(x)	__phys_to_virt(x)
+
+/*
+ * The nodes are the followings:
+ *
+ *   node 0: 0xf000.0000 - 0xf3ff.ffff
+ *   node 1: 0xf400.0000 - 0xf7ff.ffff
+ *   node 2: 0xf800.0000 - 0xfbff.ffff
+ *   node 3: 0xfc00.0000 - 0xffff.ffff
+ */
+#define NODE_MEM_SIZE_BITS	26
+
+#endif /* __ASM_ARCH_MEMORY_H */
diff --git a/arch/arm/mach-aaec2000/include/mach/system.h b/arch/arm/mach-aaec2000/include/mach/system.h
new file mode 100644
index 000000000000..8f4115d734ce
--- /dev/null
+++ b/arch/arm/mach-aaec2000/include/mach/system.h
@@ -0,0 +1,24 @@
+/*
+ *  arch/arm/mach-aaed2000/include/mach/system.h
+ *
+ *  Copyright (c) 2005 Nicolas Bellido Y Ortega
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_SYSTEM_H
+#define __ASM_ARCH_SYSTEM_H
+
+static inline void arch_idle(void)
+{
+	cpu_do_idle();
+}
+
+static inline void arch_reset(char mode)
+{
+	cpu_reset(0);
+}
+
+#endif /* __ASM_ARCH_SYSTEM_H */
diff --git a/arch/arm/mach-aaec2000/include/mach/timex.h b/arch/arm/mach-aaec2000/include/mach/timex.h
new file mode 100644
index 000000000000..6c8edf4a8828
--- /dev/null
+++ b/arch/arm/mach-aaec2000/include/mach/timex.h
@@ -0,0 +1,18 @@
+/*
+ *  arch/arm/mach-aaec2000/include/mach/timex.h
+ *
+ *  AAEC-2000 Architecture timex specification
+ *
+ *  Copyright (c) 2005 Nicolas Bellido Y Ortega
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_TIMEX_H
+#define __ASM_ARCH_TIMEX_H
+
+#define CLOCK_TICK_RATE		508000
+
+#endif /* __ASM_ARCH_TIMEX_H */
diff --git a/arch/arm/mach-aaec2000/include/mach/uncompress.h b/arch/arm/mach-aaec2000/include/mach/uncompress.h
new file mode 100644
index 000000000000..381ecad1a1bb
--- /dev/null
+++ b/arch/arm/mach-aaec2000/include/mach/uncompress.h
@@ -0,0 +1,46 @@
+/*
+ *  arch/arm/mach-aaec2000/include/mach/uncompress.h
+ *
+ *  Copyright (c) 2005 Nicolas Bellido Y Ortega
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_UNCOMPRESS_H
+#define __ASM_ARCH_UNCOMPRESS_H
+
+#include "hardware.h"
+
+#define UART(x)         (*(volatile unsigned long *)(serial_port + (x)))
+
+static void putc(int c)
+{
+	unsigned long serial_port;
+        do {
+		serial_port = _UART3_BASE;
+		if (UART(UART_CR) & UART_CR_EN) break;
+		serial_port = _UART1_BASE;
+		if (UART(UART_CR) & UART_CR_EN) break;
+		serial_port = _UART2_BASE;
+		if (UART(UART_CR) & UART_CR_EN) break;
+		return;
+	} while (0);
+
+	/* wait for space in the UART's transmitter */
+	while ((UART(UART_SR) & UART_SR_TxFF))
+		barrier();
+
+	/* send the character out. */
+	UART(UART_DR) = c;
+}
+
+static inline void flush(void)
+{
+}
+
+#define arch_decomp_setup()
+#define arch_decomp_wdog()
+
+#endif /* __ASM_ARCH_UNCOMPRESS_H */
diff --git a/arch/arm/mach-aaec2000/include/mach/vmalloc.h b/arch/arm/mach-aaec2000/include/mach/vmalloc.h
new file mode 100644
index 000000000000..551f68f666bf
--- /dev/null
+++ b/arch/arm/mach-aaec2000/include/mach/vmalloc.h
@@ -0,0 +1,16 @@
+/*
+ *  arch/arm/mach-aaec2000/include/mach/vmalloc.h
+ *
+ *  Copyright (c) 2005 Nicolas Bellido Y Ortega
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_VMALLOC_H
+#define __ASM_ARCH_VMALLOC_H
+
+#define VMALLOC_END		(PAGE_OFFSET + 0x10000000)
+
+#endif /* __ASM_ARCH_VMALLOC_H */
diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig
index 5bad6b9b00d7..a048b92cb407 100644
--- a/arch/arm/mach-at91/Kconfig
+++ b/arch/arm/mach-at91/Kconfig
@@ -297,7 +297,7 @@ config MTD_AT91_DATAFLASH_CARD
 	help
 	  Enable support for the DataFlash card.
 
-config MTD_NAND_AT91_BUSWIDTH_16
+config MTD_NAND_ATMEL_BUSWIDTH_16
 	bool "Enable 16-bit data bus interface to NAND flash"
 	depends on (MACH_AT91SAM9260EK || MACH_AT91SAM9261EK || MACH_AT91SAM9263EK || MACH_AT91SAM9G20EK || MACH_AT91CAP9ADK)
 	help
diff --git a/arch/arm/mach-at91/at91cap9.c b/arch/arm/mach-at91/at91cap9.c
index 933fa8f55cbc..638948c16770 100644
--- a/arch/arm/mach-at91/at91cap9.c
+++ b/arch/arm/mach-at91/at91cap9.c
@@ -17,10 +17,10 @@
 
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
-#include <asm/arch/at91cap9.h>
-#include <asm/arch/at91_pmc.h>
-#include <asm/arch/at91_rstc.h>
-#include <asm/arch/at91_shdwc.h>
+#include <mach/at91cap9.h>
+#include <mach/at91_pmc.h>
+#include <mach/at91_rstc.h>
+#include <mach/at91_shdwc.h>
 
 #include "generic.h"
 #include "clock.h"
diff --git a/arch/arm/mach-at91/at91cap9_devices.c b/arch/arm/mach-at91/at91cap9_devices.c
index 747b9dedab88..abb4aac8fa98 100644
--- a/arch/arm/mach-at91/at91cap9_devices.c
+++ b/arch/arm/mach-at91/at91cap9_devices.c
@@ -20,11 +20,11 @@
 
 #include <video/atmel_lcdc.h>
 
-#include <asm/arch/board.h>
-#include <asm/arch/gpio.h>
-#include <asm/arch/at91cap9.h>
-#include <asm/arch/at91cap9_matrix.h>
-#include <asm/arch/at91sam9_smc.h>
+#include <mach/board.h>
+#include <mach/gpio.h>
+#include <mach/at91cap9.h>
+#include <mach/at91cap9_matrix.h>
+#include <mach/at91sam9_smc.h>
 
 #include "generic.h"
 
@@ -376,8 +376,8 @@ void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data) {}
  *  NAND / SmartMedia
  * -------------------------------------------------------------------- */
 
-#if defined(CONFIG_MTD_NAND_AT91) || defined(CONFIG_MTD_NAND_AT91_MODULE)
-static struct at91_nand_data nand_data;
+#if defined(CONFIG_MTD_NAND_ATMEL) || defined(CONFIG_MTD_NAND_ATMEL_MODULE)
+static struct atmel_nand_data nand_data;
 
 #define NAND_BASE	AT91_CHIPSELECT_3
 
@@ -395,7 +395,7 @@ static struct resource nand_resources[] = {
 };
 
 static struct platform_device at91cap9_nand_device = {
-	.name		= "at91_nand",
+	.name		= "atmel_nand",
 	.id		= -1,
 	.dev		= {
 				.platform_data	= &nand_data,
@@ -404,7 +404,7 @@ static struct platform_device at91cap9_nand_device = {
 	.num_resources	= ARRAY_SIZE(nand_resources),
 };
 
-void __init at91_add_device_nand(struct at91_nand_data *data)
+void __init at91_add_device_nand(struct atmel_nand_data *data)
 {
 	unsigned long csa, mode;
 
@@ -445,7 +445,7 @@ void __init at91_add_device_nand(struct at91_nand_data *data)
 	platform_device_register(&at91cap9_nand_device);
 }
 #else
-void __init at91_add_device_nand(struct at91_nand_data *data) {}
+void __init at91_add_device_nand(struct atmel_nand_data *data) {}
 #endif
 
 
diff --git a/arch/arm/mach-at91/at91rm9200.c b/arch/arm/mach-at91/at91rm9200.c
index d688c1dbd925..28594fcc88e3 100644
--- a/arch/arm/mach-at91/at91rm9200.c
+++ b/arch/arm/mach-at91/at91rm9200.c
@@ -14,9 +14,9 @@
 
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
-#include <asm/arch/at91rm9200.h>
-#include <asm/arch/at91_pmc.h>
-#include <asm/arch/at91_st.h>
+#include <mach/at91rm9200.h>
+#include <mach/at91_pmc.h>
+#include <mach/at91_st.h>
 
 #include "generic.h"
 #include "clock.h"
diff --git a/arch/arm/mach-at91/at91rm9200_devices.c b/arch/arm/mach-at91/at91rm9200_devices.c
index de19bee83f75..9338825cfcd7 100644
--- a/arch/arm/mach-at91/at91rm9200_devices.c
+++ b/arch/arm/mach-at91/at91rm9200_devices.c
@@ -17,10 +17,10 @@
 #include <linux/platform_device.h>
 #include <linux/i2c-gpio.h>
 
-#include <asm/arch/board.h>
-#include <asm/arch/gpio.h>
-#include <asm/arch/at91rm9200.h>
-#include <asm/arch/at91rm9200_mc.h>
+#include <mach/board.h>
+#include <mach/gpio.h>
+#include <mach/at91rm9200.h>
+#include <mach/at91rm9200_mc.h>
 
 #include "generic.h"
 
@@ -368,8 +368,8 @@ void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data) {}
  *  NAND / SmartMedia
  * -------------------------------------------------------------------- */
 
-#if defined(CONFIG_MTD_NAND_AT91) || defined(CONFIG_MTD_NAND_AT91_MODULE)
-static struct at91_nand_data nand_data;
+#if defined(CONFIG_MTD_NAND_ATMEL) || defined(CONFIG_MTD_NAND_ATMEL_MODULE)
+static struct atmel_nand_data nand_data;
 
 #define NAND_BASE	AT91_CHIPSELECT_3
 
@@ -382,7 +382,7 @@ static struct resource nand_resources[] = {
 };
 
 static struct platform_device at91rm9200_nand_device = {
-	.name		= "at91_nand",
+	.name		= "atmel_nand",
 	.id		= -1,
 	.dev		= {
 				.platform_data	= &nand_data,
@@ -391,7 +391,7 @@ static struct platform_device at91rm9200_nand_device = {
 	.num_resources	= ARRAY_SIZE(nand_resources),
 };
 
-void __init at91_add_device_nand(struct at91_nand_data *data)
+void __init at91_add_device_nand(struct atmel_nand_data *data)
 {
 	unsigned int csa;
 
@@ -429,7 +429,7 @@ void __init at91_add_device_nand(struct at91_nand_data *data)
 	platform_device_register(&at91rm9200_nand_device);
 }
 #else
-void __init at91_add_device_nand(struct at91_nand_data *data) {}
+void __init at91_add_device_nand(struct atmel_nand_data *data) {}
 #endif
 
 
diff --git a/arch/arm/mach-at91/at91rm9200_time.c b/arch/arm/mach-at91/at91rm9200_time.c
index 50392ff71513..a72e798a2a40 100644
--- a/arch/arm/mach-at91/at91rm9200_time.c
+++ b/arch/arm/mach-at91/at91rm9200_time.c
@@ -26,7 +26,7 @@
 
 #include <asm/mach/time.h>
 
-#include <asm/arch/at91_st.h>
+#include <mach/at91_st.h>
 
 static unsigned long last_crtr;
 static u32 irqmask;
diff --git a/arch/arm/mach-at91/at91sam9260.c b/arch/arm/mach-at91/at91sam9260.c
index 380f12a12200..accb69ec478e 100644
--- a/arch/arm/mach-at91/at91sam9260.c
+++ b/arch/arm/mach-at91/at91sam9260.c
@@ -15,11 +15,11 @@
 
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
-#include <asm/arch/cpu.h>
-#include <asm/arch/at91sam9260.h>
-#include <asm/arch/at91_pmc.h>
-#include <asm/arch/at91_rstc.h>
-#include <asm/arch/at91_shdwc.h>
+#include <mach/cpu.h>
+#include <mach/at91sam9260.h>
+#include <mach/at91_pmc.h>
+#include <mach/at91_rstc.h>
+#include <mach/at91_shdwc.h>
 
 #include "generic.h"
 #include "clock.h"
diff --git a/arch/arm/mach-at91/at91sam9260_devices.c b/arch/arm/mach-at91/at91sam9260_devices.c
index 86cba4ac29b1..7774d17dde74 100644
--- a/arch/arm/mach-at91/at91sam9260_devices.c
+++ b/arch/arm/mach-at91/at91sam9260_devices.c
@@ -16,12 +16,12 @@
 #include <linux/platform_device.h>
 #include <linux/i2c-gpio.h>
 
-#include <asm/arch/board.h>
-#include <asm/arch/gpio.h>
-#include <asm/arch/cpu.h>
-#include <asm/arch/at91sam9260.h>
-#include <asm/arch/at91sam9260_matrix.h>
-#include <asm/arch/at91sam9_smc.h>
+#include <mach/board.h>
+#include <mach/gpio.h>
+#include <mach/cpu.h>
+#include <mach/at91sam9260.h>
+#include <mach/at91sam9260_matrix.h>
+#include <mach/at91sam9_smc.h>
 
 #include "generic.h"
 
@@ -283,8 +283,8 @@ void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data) {}
  *  NAND / SmartMedia
  * -------------------------------------------------------------------- */
 
-#if defined(CONFIG_MTD_NAND_AT91) || defined(CONFIG_MTD_NAND_AT91_MODULE)
-static struct at91_nand_data nand_data;
+#if defined(CONFIG_MTD_NAND_ATMEL) || defined(CONFIG_MTD_NAND_ATMEL_MODULE)
+static struct atmel_nand_data nand_data;
 
 #define NAND_BASE	AT91_CHIPSELECT_3
 
@@ -302,7 +302,7 @@ static struct resource nand_resources[] = {
 };
 
 static struct platform_device at91sam9260_nand_device = {
-	.name		= "at91_nand",
+	.name		= "atmel_nand",
 	.id		= -1,
 	.dev		= {
 				.platform_data	= &nand_data,
@@ -311,7 +311,7 @@ static struct platform_device at91sam9260_nand_device = {
 	.num_resources	= ARRAY_SIZE(nand_resources),
 };
 
-void __init at91_add_device_nand(struct at91_nand_data *data)
+void __init at91_add_device_nand(struct atmel_nand_data *data)
 {
 	unsigned long csa, mode;
 
@@ -373,7 +373,7 @@ void __init at91_add_device_nand(struct at91_nand_data *data)
 	platform_device_register(&at91sam9260_nand_device);
 }
 #else
-void __init at91_add_device_nand(struct at91_nand_data *data) {}
+void __init at91_add_device_nand(struct atmel_nand_data *data) {}
 #endif
 
 
diff --git a/arch/arm/mach-at91/at91sam9261.c b/arch/arm/mach-at91/at91sam9261.c
index 35bf6fd52516..7b51a59ae8b3 100644
--- a/arch/arm/mach-at91/at91sam9261.c
+++ b/arch/arm/mach-at91/at91sam9261.c
@@ -15,10 +15,10 @@
 
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
-#include <asm/arch/at91sam9261.h>
-#include <asm/arch/at91_pmc.h>
-#include <asm/arch/at91_rstc.h>
-#include <asm/arch/at91_shdwc.h>
+#include <mach/at91sam9261.h>
+#include <mach/at91_pmc.h>
+#include <mach/at91_rstc.h>
+#include <mach/at91_shdwc.h>
 
 #include "generic.h"
 #include "clock.h"
diff --git a/arch/arm/mach-at91/at91sam9261_devices.c b/arch/arm/mach-at91/at91sam9261_devices.c
index ec1891375dfb..6b89172310c7 100644
--- a/arch/arm/mach-at91/at91sam9261_devices.c
+++ b/arch/arm/mach-at91/at91sam9261_devices.c
@@ -20,11 +20,11 @@
 #include <linux/fb.h>
 #include <video/atmel_lcdc.h>
 
-#include <asm/arch/board.h>
-#include <asm/arch/gpio.h>
-#include <asm/arch/at91sam9261.h>
-#include <asm/arch/at91sam9261_matrix.h>
-#include <asm/arch/at91sam9_smc.h>
+#include <mach/board.h>
+#include <mach/gpio.h>
+#include <mach/at91sam9261.h>
+#include <mach/at91sam9261_matrix.h>
+#include <mach/at91sam9_smc.h>
 
 #include "generic.h"
 
@@ -198,8 +198,8 @@ void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data) {}
  *  NAND / SmartMedia
  * -------------------------------------------------------------------- */
 
-#if defined(CONFIG_MTD_NAND_AT91) || defined(CONFIG_MTD_NAND_AT91_MODULE)
-static struct at91_nand_data nand_data;
+#if defined(CONFIG_MTD_NAND_ATMEL) || defined(CONFIG_MTD_NAND_ATMEL_MODULE)
+static struct atmel_nand_data nand_data;
 
 #define NAND_BASE	AT91_CHIPSELECT_3
 
@@ -211,8 +211,8 @@ static struct resource nand_resources[] = {
 	}
 };
 
-static struct platform_device at91_nand_device = {
-	.name		= "at91_nand",
+static struct platform_device atmel_nand_device = {
+	.name		= "atmel_nand",
 	.id		= -1,
 	.dev		= {
 				.platform_data	= &nand_data,
@@ -221,7 +221,7 @@ static struct platform_device at91_nand_device = {
 	.num_resources	= ARRAY_SIZE(nand_resources),
 };
 
-void __init at91_add_device_nand(struct at91_nand_data *data)
+void __init at91_add_device_nand(struct atmel_nand_data *data)
 {
 	unsigned long csa, mode;
 
@@ -262,11 +262,11 @@ void __init at91_add_device_nand(struct at91_nand_data *data)
 	at91_set_A_periph(AT91_PIN_PC1, 0);		/* NANDWE */
 
 	nand_data = *data;
-	platform_device_register(&at91_nand_device);
+	platform_device_register(&atmel_nand_device);
 }
 
 #else
-void __init at91_add_device_nand(struct at91_nand_data *data) {}
+void __init at91_add_device_nand(struct atmel_nand_data *data) {}
 #endif
 
 
diff --git a/arch/arm/mach-at91/at91sam9263.c b/arch/arm/mach-at91/at91sam9263.c
index 052074a9f2d3..80bfab5680e2 100644
--- a/arch/arm/mach-at91/at91sam9263.c
+++ b/arch/arm/mach-at91/at91sam9263.c
@@ -15,10 +15,10 @@
 
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
-#include <asm/arch/at91sam9263.h>
-#include <asm/arch/at91_pmc.h>
-#include <asm/arch/at91_rstc.h>
-#include <asm/arch/at91_shdwc.h>
+#include <mach/at91sam9263.h>
+#include <mach/at91_pmc.h>
+#include <mach/at91_rstc.h>
+#include <mach/at91_shdwc.h>
 
 #include "generic.h"
 #include "clock.h"
diff --git a/arch/arm/mach-at91/at91sam9263_devices.c b/arch/arm/mach-at91/at91sam9263_devices.c
index 8a81f76f0200..c93992f55dc9 100644
--- a/arch/arm/mach-at91/at91sam9263_devices.c
+++ b/arch/arm/mach-at91/at91sam9263_devices.c
@@ -19,11 +19,11 @@
 #include <linux/fb.h>
 #include <video/atmel_lcdc.h>
 
-#include <asm/arch/board.h>
-#include <asm/arch/gpio.h>
-#include <asm/arch/at91sam9263.h>
-#include <asm/arch/at91sam9263_matrix.h>
-#include <asm/arch/at91sam9_smc.h>
+#include <mach/board.h>
+#include <mach/gpio.h>
+#include <mach/at91sam9263.h>
+#include <mach/at91sam9263_matrix.h>
+#include <mach/at91sam9_smc.h>
 
 #include "generic.h"
 
@@ -352,8 +352,8 @@ void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data) {}
  *  NAND / SmartMedia
  * -------------------------------------------------------------------- */
 
-#if defined(CONFIG_MTD_NAND_AT91) || defined(CONFIG_MTD_NAND_AT91_MODULE)
-static struct at91_nand_data nand_data;
+#if defined(CONFIG_MTD_NAND_ATMEL) || defined(CONFIG_MTD_NAND_ATMEL_MODULE)
+static struct atmel_nand_data nand_data;
 
 #define NAND_BASE	AT91_CHIPSELECT_3
 
@@ -371,7 +371,7 @@ static struct resource nand_resources[] = {
 };
 
 static struct platform_device at91sam9263_nand_device = {
-	.name		= "at91_nand",
+	.name		= "atmel_nand",
 	.id		= -1,
 	.dev		= {
 				.platform_data	= &nand_data,
@@ -380,7 +380,7 @@ static struct platform_device at91sam9263_nand_device = {
 	.num_resources	= ARRAY_SIZE(nand_resources),
 };
 
-void __init at91_add_device_nand(struct at91_nand_data *data)
+void __init at91_add_device_nand(struct atmel_nand_data *data)
 {
 	unsigned long csa, mode;
 
@@ -421,7 +421,7 @@ void __init at91_add_device_nand(struct at91_nand_data *data)
 	platform_device_register(&at91sam9263_nand_device);
 }
 #else
-void __init at91_add_device_nand(struct at91_nand_data *data) {}
+void __init at91_add_device_nand(struct atmel_nand_data *data) {}
 #endif
 
 
diff --git a/arch/arm/mach-at91/at91sam926x_time.c b/arch/arm/mach-at91/at91sam926x_time.c
index 5cecbd7de6a6..122fd77ed580 100644
--- a/arch/arm/mach-at91/at91sam926x_time.c
+++ b/arch/arm/mach-at91/at91sam926x_time.c
@@ -17,7 +17,7 @@
 
 #include <asm/mach/time.h>
 
-#include <asm/arch/at91_pit.h>
+#include <mach/at91_pit.h>
 
 
 #define PIT_CPIV(x)	((x) & AT91_PIT_CPIV)
diff --git a/arch/arm/mach-at91/at91sam9rl.c b/arch/arm/mach-at91/at91sam9rl.c
index 902c79893ec7..556bddf35b45 100644
--- a/arch/arm/mach-at91/at91sam9rl.c
+++ b/arch/arm/mach-at91/at91sam9rl.c
@@ -14,11 +14,11 @@
 
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
-#include <asm/arch/cpu.h>
-#include <asm/arch/at91sam9rl.h>
-#include <asm/arch/at91_pmc.h>
-#include <asm/arch/at91_rstc.h>
-#include <asm/arch/at91_shdwc.h>
+#include <mach/cpu.h>
+#include <mach/at91sam9rl.h>
+#include <mach/at91_pmc.h>
+#include <mach/at91_rstc.h>
+#include <mach/at91_shdwc.h>
 
 #include "generic.h"
 #include "clock.h"
diff --git a/arch/arm/mach-at91/at91sam9rl_devices.c b/arch/arm/mach-at91/at91sam9rl_devices.c
index ae28101e7542..620886341fb5 100644
--- a/arch/arm/mach-at91/at91sam9rl_devices.c
+++ b/arch/arm/mach-at91/at91sam9rl_devices.c
@@ -16,11 +16,11 @@
 #include <linux/fb.h>
 #include <video/atmel_lcdc.h>
 
-#include <asm/arch/board.h>
-#include <asm/arch/gpio.h>
-#include <asm/arch/at91sam9rl.h>
-#include <asm/arch/at91sam9rl_matrix.h>
-#include <asm/arch/at91sam9_smc.h>
+#include <mach/board.h>
+#include <mach/gpio.h>
+#include <mach/at91sam9rl.h>
+#include <mach/at91sam9rl_matrix.h>
+#include <mach/at91sam9_smc.h>
 
 #include "generic.h"
 
@@ -194,8 +194,8 @@ void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data) {}
  *  NAND / SmartMedia
  * -------------------------------------------------------------------- */
 
-#if defined(CONFIG_MTD_NAND_AT91) || defined(CONFIG_MTD_NAND_AT91_MODULE)
-static struct at91_nand_data nand_data;
+#if defined(CONFIG_MTD_NAND_ATMEL) || defined(CONFIG_MTD_NAND_ATMEL_MODULE)
+static struct atmel_nand_data nand_data;
 
 #define NAND_BASE	AT91_CHIPSELECT_3
 
@@ -212,8 +212,8 @@ static struct resource nand_resources[] = {
 	}
 };
 
-static struct platform_device at91_nand_device = {
-	.name		= "at91_nand",
+static struct platform_device atmel_nand_device = {
+	.name		= "atmel_nand",
 	.id		= -1,
 	.dev		= {
 				.platform_data	= &nand_data,
@@ -222,7 +222,7 @@ static struct platform_device at91_nand_device = {
 	.num_resources	= ARRAY_SIZE(nand_resources),
 };
 
-void __init at91_add_device_nand(struct at91_nand_data *data)
+void __init at91_add_device_nand(struct atmel_nand_data *data)
 {
 	unsigned long csa;
 
@@ -259,11 +259,11 @@ void __init at91_add_device_nand(struct at91_nand_data *data)
 	at91_set_A_periph(AT91_PIN_PB5, 0);		/* NANDWE */
 
 	nand_data = *data;
-	platform_device_register(&at91_nand_device);
+	platform_device_register(&atmel_nand_device);
 }
 
 #else
-void __init at91_add_device_nand(struct at91_nand_data *data) {}
+void __init at91_add_device_nand(struct atmel_nand_data *data) {}
 #endif
 
 
diff --git a/arch/arm/mach-at91/at91x40.c b/arch/arm/mach-at91/at91x40.c
index f44647738ee4..ad3ec85b2790 100644
--- a/arch/arm/mach-at91/at91x40.c
+++ b/arch/arm/mach-at91/at91x40.c
@@ -14,9 +14,9 @@
 #include <linux/init.h>
 #include <linux/irq.h>
 #include <asm/mach/arch.h>
-#include <asm/arch/at91x40.h>
-#include <asm/arch/at91_st.h>
-#include <asm/arch/timex.h>
+#include <mach/at91x40.h>
+#include <mach/at91_st.h>
+#include <mach/timex.h>
 #include "generic.h"
 
 /*
diff --git a/arch/arm/mach-at91/at91x40_time.c b/arch/arm/mach-at91/at91x40_time.c
index eddc882f1b4a..869b5e28d195 100644
--- a/arch/arm/mach-at91/at91x40_time.c
+++ b/arch/arm/mach-at91/at91x40_time.c
@@ -23,10 +23,10 @@
 #include <linux/interrupt.h>
 #include <linux/irq.h>
 #include <linux/time.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 #include <asm/mach/time.h>
-#include <asm/arch/at91_tc.h>
+#include <mach/at91_tc.h>
 
 /*
  *	3 counter/timer units present.
diff --git a/arch/arm/mach-at91/board-1arm.c b/arch/arm/mach-at91/board-1arm.c
index 2d3d4b6f7b02..9b27d167bff0 100644
--- a/arch/arm/mach-at91/board-1arm.c
+++ b/arch/arm/mach-at91/board-1arm.c
@@ -24,7 +24,7 @@
 #include <linux/module.h>
 #include <linux/platform_device.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/setup.h>
 #include <asm/mach-types.h>
 #include <asm/irq.h>
@@ -33,8 +33,8 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
-#include <asm/arch/board.h>
-#include <asm/arch/gpio.h>
+#include <mach/board.h>
+#include <mach/gpio.h>
 
 #include "generic.h"
 
diff --git a/arch/arm/mach-at91/board-cam60.c b/arch/arm/mach-at91/board-cam60.c
index b22a1a004055..cdddca54b938 100644
--- a/arch/arm/mach-at91/board-cam60.c
+++ b/arch/arm/mach-at91/board-cam60.c
@@ -28,7 +28,7 @@
 #include <linux/spi/spi.h>
 #include <linux/spi/flash.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/setup.h>
 #include <asm/mach-types.h>
 #include <asm/irq.h>
@@ -37,8 +37,8 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
-#include <asm/arch/board.h>
-#include <asm/arch/gpio.h>
+#include <mach/board.h>
+#include <mach/gpio.h>
 
 #include "generic.h"
 
@@ -142,7 +142,7 @@ static struct mtd_partition * __init nand_partitions(int size, int *num_partitio
 	return cam60_nand_partition;
 }
 
-static struct at91_nand_data __initdata cam60_nand_data = {
+static struct atmel_nand_data __initdata cam60_nand_data = {
 	.ale		= 21,
 	.cle		= 22,
 	// .det_pin	= ... not there
diff --git a/arch/arm/mach-at91/board-cap9adk.c b/arch/arm/mach-at91/board-cap9adk.c
index 8a2a958639db..196199552eb6 100644
--- a/arch/arm/mach-at91/board-cap9adk.c
+++ b/arch/arm/mach-at91/board-cap9adk.c
@@ -33,7 +33,7 @@
 
 #include <video/atmel_lcdc.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/setup.h>
 #include <asm/mach-types.h>
 #include <asm/irq.h>
@@ -42,10 +42,10 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
-#include <asm/arch/board.h>
-#include <asm/arch/gpio.h>
-#include <asm/arch/at91cap9_matrix.h>
-#include <asm/arch/at91sam9_smc.h>
+#include <mach/board.h>
+#include <mach/gpio.h>
+#include <mach/at91cap9_matrix.h>
+#include <mach/at91sam9_smc.h>
 
 #include "generic.h"
 
@@ -181,14 +181,14 @@ static struct mtd_partition * __init nand_partitions(int size, int *num_partitio
 	return cap9adk_nand_partitions;
 }
 
-static struct at91_nand_data __initdata cap9adk_nand_data = {
+static struct atmel_nand_data __initdata cap9adk_nand_data = {
 	.ale		= 21,
 	.cle		= 22,
 //	.det_pin	= ... not connected
 //	.rdy_pin	= ... not connected
 	.enable_pin	= AT91_PIN_PD15,
 	.partition_info	= nand_partitions,
-#if defined(CONFIG_MTD_NAND_AT91_BUSWIDTH_16)
+#if defined(CONFIG_MTD_NAND_ATMEL_BUSWIDTH_16)
 	.bus_width_16	= 1,
 #else
 	.bus_width_16	= 0,
@@ -330,10 +330,10 @@ static void __init cap9adk_board_init(void)
 	/* Serial */
 	at91_add_device_serial();
 	/* USB Host */
-	set_irq_type(AT91CAP9_ID_UHP, IRQT_HIGH);
+	set_irq_type(AT91CAP9_ID_UHP, IRQ_TYPE_LEVEL_HIGH);
 	at91_add_device_usbh(&cap9adk_usbh_data);
 	/* USB HS */
-	set_irq_type(AT91CAP9_ID_UDPHS, IRQT_HIGH);
+	set_irq_type(AT91CAP9_ID_UDPHS, IRQ_TYPE_LEVEL_HIGH);
 	at91_add_device_usba(&cap9adk_usba_udc_data);
 	/* SPI */
 	at91_add_device_spi(cap9adk_spi_devices, ARRAY_SIZE(cap9adk_spi_devices));
@@ -350,7 +350,7 @@ static void __init cap9adk_board_init(void)
 	/* I2C */
 	at91_add_device_i2c(NULL, 0);
 	/* LCD Controller */
-	set_irq_type(AT91CAP9_ID_LCDC, IRQT_HIGH);
+	set_irq_type(AT91CAP9_ID_LCDC, IRQ_TYPE_LEVEL_HIGH);
 	at91_add_device_lcdc(&cap9adk_lcdc_data);
 	/* AC97 */
 	at91_add_device_ac97(&cap9adk_ac97_data);
diff --git a/arch/arm/mach-at91/board-carmeva.c b/arch/arm/mach-at91/board-carmeva.c
index 9854fc3dd1f2..afa1ff0e9577 100644
--- a/arch/arm/mach-at91/board-carmeva.c
+++ b/arch/arm/mach-at91/board-carmeva.c
@@ -25,7 +25,7 @@
 #include <linux/module.h>
 #include <linux/platform_device.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/setup.h>
 #include <asm/mach-types.h>
 #include <asm/irq.h>
@@ -34,8 +34,8 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
-#include <asm/arch/board.h>
-#include <asm/arch/gpio.h>
+#include <mach/board.h>
+#include <mach/gpio.h>
 
 #include "generic.h"
 
diff --git a/arch/arm/mach-at91/board-csb337.c b/arch/arm/mach-at91/board-csb337.c
index 81f1ebb4e964..cb7c9a8fa487 100644
--- a/arch/arm/mach-at91/board-csb337.c
+++ b/arch/arm/mach-at91/board-csb337.c
@@ -28,7 +28,7 @@
 #include <linux/input.h>
 #include <linux/gpio_keys.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/setup.h>
 #include <asm/mach-types.h>
 #include <asm/irq.h>
@@ -37,8 +37,8 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
-#include <asm/arch/board.h>
-#include <asm/arch/gpio.h>
+#include <mach/board.h>
+#include <mach/gpio.h>
 
 #include "generic.h"
 
diff --git a/arch/arm/mach-at91/board-csb637.c b/arch/arm/mach-at91/board-csb637.c
index bb1a5474ddab..8db8bd8babd9 100644
--- a/arch/arm/mach-at91/board-csb637.c
+++ b/arch/arm/mach-at91/board-csb637.c
@@ -25,7 +25,7 @@
 #include <linux/platform_device.h>
 #include <linux/mtd/physmap.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/setup.h>
 #include <asm/mach-types.h>
 #include <asm/irq.h>
@@ -34,8 +34,8 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
-#include <asm/arch/board.h>
-#include <asm/arch/gpio.h>
+#include <mach/board.h>
+#include <mach/gpio.h>
 
 #include "generic.h"
 
diff --git a/arch/arm/mach-at91/board-dk.c b/arch/arm/mach-at91/board-dk.c
index dab958d25926..43e1aa7ecef7 100644
--- a/arch/arm/mach-at91/board-dk.c
+++ b/arch/arm/mach-at91/board-dk.c
@@ -29,7 +29,7 @@
 #include <linux/spi/spi.h>
 #include <linux/mtd/physmap.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/setup.h>
 #include <asm/mach-types.h>
 #include <asm/irq.h>
@@ -38,9 +38,9 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
-#include <asm/arch/board.h>
-#include <asm/arch/gpio.h>
-#include <asm/arch/at91rm9200_mc.h>
+#include <mach/board.h>
+#include <mach/gpio.h>
+#include <mach/at91rm9200_mc.h>
 
 #include "generic.h"
 
@@ -147,7 +147,7 @@ static struct mtd_partition * __init nand_partitions(int size, int *num_partitio
 	return dk_nand_partition;
 }
 
-static struct at91_nand_data __initdata dk_nand_data = {
+static struct atmel_nand_data __initdata dk_nand_data = {
 	.ale		= 22,
 	.cle		= 21,
 	.det_pin	= AT91_PIN_PB1,
diff --git a/arch/arm/mach-at91/board-eb01.c b/arch/arm/mach-at91/board-eb01.c
index 0c1e3858e7df..1f9d3cb64c50 100644
--- a/arch/arm/mach-at91/board-eb01.c
+++ b/arch/arm/mach-at91/board-eb01.c
@@ -24,10 +24,10 @@
 #include <linux/platform_device.h>
 #include <linux/irq.h>
 #include <asm/mach-types.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
-#include <asm/arch/board.h>
+#include <mach/board.h>
 #include "generic.h"
 
 static void __init at91eb01_map_io(void)
diff --git a/arch/arm/mach-at91/board-eb9200.c b/arch/arm/mach-at91/board-eb9200.c
index 3fe054e0056b..528656761ff7 100644
--- a/arch/arm/mach-at91/board-eb9200.c
+++ b/arch/arm/mach-at91/board-eb9200.c
@@ -25,7 +25,7 @@
 #include <linux/module.h>
 #include <linux/device.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/setup.h>
 #include <asm/mach-types.h>
 #include <asm/irq.h>
@@ -34,8 +34,8 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
-#include <asm/arch/board.h>
-#include <asm/arch/gpio.h>
+#include <mach/board.h>
+#include <mach/gpio.h>
 
 #include "generic.h"
 
diff --git a/arch/arm/mach-at91/board-ecbat91.c b/arch/arm/mach-at91/board-ecbat91.c
index e77fad443835..bfeee8a2af28 100644
--- a/arch/arm/mach-at91/board-ecbat91.c
+++ b/arch/arm/mach-at91/board-ecbat91.c
@@ -27,7 +27,7 @@
 #include <linux/spi/spi.h>
 #include <linux/spi/flash.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/setup.h>
 #include <asm/mach-types.h>
 #include <asm/irq.h>
@@ -36,8 +36,8 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
-#include <asm/arch/board.h>
-#include <asm/arch/gpio.h>
+#include <mach/board.h>
+#include <mach/gpio.h>
 
 #include "generic.h"
 
diff --git a/arch/arm/mach-at91/board-ek.c b/arch/arm/mach-at91/board-ek.c
index 74aa4325eab3..60626e7a3490 100644
--- a/arch/arm/mach-at91/board-ek.c
+++ b/arch/arm/mach-at91/board-ek.c
@@ -29,7 +29,7 @@
 #include <linux/spi/spi.h>
 #include <linux/mtd/physmap.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/setup.h>
 #include <asm/mach-types.h>
 #include <asm/irq.h>
@@ -38,9 +38,9 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
-#include <asm/arch/board.h>
-#include <asm/arch/gpio.h>
-#include <asm/arch/at91rm9200_mc.h>
+#include <mach/board.h>
+#include <mach/gpio.h>
+#include <mach/at91rm9200_mc.h>
 
 #include "generic.h"
 
diff --git a/arch/arm/mach-at91/board-kafa.c b/arch/arm/mach-at91/board-kafa.c
index cf1b7b2f76fb..a87956c0a74f 100644
--- a/arch/arm/mach-at91/board-kafa.c
+++ b/arch/arm/mach-at91/board-kafa.c
@@ -24,7 +24,7 @@
 #include <linux/module.h>
 #include <linux/platform_device.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/setup.h>
 #include <asm/mach-types.h>
 #include <asm/irq.h>
@@ -33,8 +33,8 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
-#include <asm/arch/board.h>
-#include <asm/arch/gpio.h>
+#include <mach/board.h>
+#include <mach/gpio.h>
 
 #include "generic.h"
 
diff --git a/arch/arm/mach-at91/board-kb9202.c b/arch/arm/mach-at91/board-kb9202.c
index cb065febd95e..fe9b9913fa3c 100644
--- a/arch/arm/mach-at91/board-kb9202.c
+++ b/arch/arm/mach-at91/board-kb9202.c
@@ -25,7 +25,7 @@
 #include <linux/module.h>
 #include <linux/platform_device.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/setup.h>
 #include <asm/mach-types.h>
 #include <asm/irq.h>
@@ -34,10 +34,10 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
-#include <asm/arch/board.h>
-#include <asm/arch/gpio.h>
+#include <mach/board.h>
+#include <mach/gpio.h>
 
-#include <asm/arch/at91rm9200_mc.h>
+#include <mach/at91rm9200_mc.h>
 
 #include "generic.h"
 
@@ -105,7 +105,7 @@ static struct mtd_partition * __init nand_partitions(int size, int *num_partitio
 	return kb9202_nand_partition;
 }
 
-static struct at91_nand_data __initdata kb9202_nand_data = {
+static struct atmel_nand_data __initdata kb9202_nand_data = {
 	.ale		= 22,
 	.cle		= 21,
 	// .det_pin	= ... not there
diff --git a/arch/arm/mach-at91/board-picotux200.c b/arch/arm/mach-at91/board-picotux200.c
index 6acb55c09ae5..dbc912d633c7 100644
--- a/arch/arm/mach-at91/board-picotux200.c
+++ b/arch/arm/mach-at91/board-picotux200.c
@@ -27,7 +27,7 @@
 #include <linux/spi/spi.h>
 #include <linux/mtd/physmap.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/setup.h>
 #include <asm/mach-types.h>
 #include <asm/irq.h>
@@ -36,9 +36,9 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
-#include <asm/arch/board.h>
-#include <asm/arch/gpio.h>
-#include <asm/arch/at91rm9200_mc.h>
+#include <mach/board.h>
+#include <mach/gpio.h>
+#include <mach/at91rm9200_mc.h>
 
 #include "generic.h"
 
diff --git a/arch/arm/mach-at91/board-qil-a9260.c b/arch/arm/mach-at91/board-qil-a9260.c
index 99b4ec3818d6..4c28413426c2 100644
--- a/arch/arm/mach-at91/board-qil-a9260.c
+++ b/arch/arm/mach-at91/board-qil-a9260.c
@@ -30,7 +30,7 @@
 #include <linux/input.h>
 #include <linux/clk.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/setup.h>
 #include <asm/mach-types.h>
 #include <asm/irq.h>
@@ -39,9 +39,9 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
-#include <asm/arch/board.h>
-#include <asm/arch/gpio.h>
-#include <asm/arch/at91_shdwc.h>
+#include <mach/board.h>
+#include <mach/gpio.h>
+#include <mach/at91_shdwc.h>
 
 #include "generic.h"
 
@@ -140,14 +140,14 @@ static struct mtd_partition * __init nand_partitions(int size, int *num_partitio
 	return ek_nand_partition;
 }
 
-static struct at91_nand_data __initdata ek_nand_data = {
+static struct atmel_nand_data __initdata ek_nand_data = {
 	.ale		= 21,
 	.cle		= 22,
 //	.det_pin	= ... not connected
 	.rdy_pin	= AT91_PIN_PC13,
 	.enable_pin	= AT91_PIN_PC14,
 	.partition_info	= nand_partitions,
-#if defined(CONFIG_MTD_NAND_AT91_BUSWIDTH_16)
+#if defined(CONFIG_MTD_NAND_ATMEL_BUSWIDTH_16)
 	.bus_width_16	= 1,
 #else
 	.bus_width_16	= 0,
diff --git a/arch/arm/mach-at91/board-sam9-l9260.c b/arch/arm/mach-at91/board-sam9-l9260.c
index 8f76af5e219a..e4910cb26c16 100644
--- a/arch/arm/mach-at91/board-sam9-l9260.c
+++ b/arch/arm/mach-at91/board-sam9-l9260.c
@@ -27,7 +27,7 @@
 #include <linux/platform_device.h>
 #include <linux/spi/spi.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/setup.h>
 #include <asm/mach-types.h>
 #include <asm/irq.h>
@@ -36,8 +36,8 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
-#include <asm/arch/board.h>
-#include <asm/arch/gpio.h>
+#include <mach/board.h>
+#include <mach/gpio.h>
 
 #include "generic.h"
 
@@ -141,14 +141,14 @@ static struct mtd_partition * __init nand_partitions(int size, int *num_partitio
 	return ek_nand_partition;
 }
 
-static struct at91_nand_data __initdata ek_nand_data = {
+static struct atmel_nand_data __initdata ek_nand_data = {
 	.ale		= 21,
 	.cle		= 22,
 //	.det_pin	= ... not connected
 	.rdy_pin	= AT91_PIN_PC13,
 	.enable_pin	= AT91_PIN_PC14,
 	.partition_info	= nand_partitions,
-#if defined(CONFIG_MTD_NAND_AT91_BUSWIDTH_16)
+#if defined(CONFIG_MTD_NAND_ATMEL_BUSWIDTH_16)
 	.bus_width_16	= 1,
 #else
 	.bus_width_16	= 0,
diff --git a/arch/arm/mach-at91/board-sam9260ek.c b/arch/arm/mach-at91/board-sam9260ek.c
index 4d1d9c777084..cb20e70b3b06 100644
--- a/arch/arm/mach-at91/board-sam9260ek.c
+++ b/arch/arm/mach-at91/board-sam9260ek.c
@@ -28,7 +28,7 @@
 #include <linux/spi/at73c213.h>
 #include <linux/clk.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/setup.h>
 #include <asm/mach-types.h>
 #include <asm/irq.h>
@@ -37,8 +37,8 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
-#include <asm/arch/board.h>
-#include <asm/arch/gpio.h>
+#include <mach/board.h>
+#include <mach/gpio.h>
 
 #include "generic.h"
 
@@ -178,14 +178,14 @@ static struct mtd_partition * __init nand_partitions(int size, int *num_partitio
 	return ek_nand_partition;
 }
 
-static struct at91_nand_data __initdata ek_nand_data = {
+static struct atmel_nand_data __initdata ek_nand_data = {
 	.ale		= 21,
 	.cle		= 22,
 //	.det_pin	= ... not connected
 	.rdy_pin	= AT91_PIN_PC13,
 	.enable_pin	= AT91_PIN_PC14,
 	.partition_info	= nand_partitions,
-#if defined(CONFIG_MTD_NAND_AT91_BUSWIDTH_16)
+#if defined(CONFIG_MTD_NAND_ATMEL_BUSWIDTH_16)
 	.bus_width_16	= 1,
 #else
 	.bus_width_16	= 0,
diff --git a/arch/arm/mach-at91/board-sam9261ek.c b/arch/arm/mach-at91/board-sam9261ek.c
index 08382c0df221..1a9963b811c7 100644
--- a/arch/arm/mach-at91/board-sam9261ek.c
+++ b/arch/arm/mach-at91/board-sam9261ek.c
@@ -35,7 +35,7 @@
 
 #include <video/atmel_lcdc.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/setup.h>
 #include <asm/mach-types.h>
 #include <asm/irq.h>
@@ -44,9 +44,9 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
-#include <asm/arch/board.h>
-#include <asm/arch/gpio.h>
-#include <asm/arch/at91sam9_smc.h>
+#include <mach/board.h>
+#include <mach/gpio.h>
+#include <mach/at91sam9_smc.h>
 
 #include "generic.h"
 
@@ -183,14 +183,14 @@ static struct mtd_partition * __init nand_partitions(int size, int *num_partitio
 	return ek_nand_partition;
 }
 
-static struct at91_nand_data __initdata ek_nand_data = {
+static struct atmel_nand_data __initdata ek_nand_data = {
 	.ale		= 22,
 	.cle		= 21,
 //	.det_pin	= ... not connected
 	.rdy_pin	= AT91_PIN_PC15,
 	.enable_pin	= AT91_PIN_PC14,
 	.partition_info	= nand_partitions,
-#if defined(CONFIG_MTD_NAND_AT91_BUSWIDTH_16)
+#if defined(CONFIG_MTD_NAND_ATMEL_BUSWIDTH_16)
 	.bus_width_16	= 1,
 #else
 	.bus_width_16	= 0,
diff --git a/arch/arm/mach-at91/board-sam9263ek.c b/arch/arm/mach-at91/board-sam9263ek.c
index b4cd5d0ed597..b1d11960a735 100644
--- a/arch/arm/mach-at91/board-sam9263ek.c
+++ b/arch/arm/mach-at91/board-sam9263ek.c
@@ -32,7 +32,7 @@
 
 #include <video/atmel_lcdc.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/setup.h>
 #include <asm/mach-types.h>
 #include <asm/irq.h>
@@ -41,9 +41,9 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
-#include <asm/arch/board.h>
-#include <asm/arch/gpio.h>
-#include <asm/arch/at91sam9_smc.h>
+#include <mach/board.h>
+#include <mach/gpio.h>
+#include <mach/at91sam9_smc.h>
 
 #include "generic.h"
 
@@ -187,14 +187,14 @@ static struct mtd_partition * __init nand_partitions(int size, int *num_partitio
 	return ek_nand_partition;
 }
 
-static struct at91_nand_data __initdata ek_nand_data = {
+static struct atmel_nand_data __initdata ek_nand_data = {
 	.ale		= 21,
 	.cle		= 22,
 //	.det_pin	= ... not connected
 	.rdy_pin	= AT91_PIN_PA22,
 	.enable_pin	= AT91_PIN_PD15,
 	.partition_info	= nand_partitions,
-#if defined(CONFIG_MTD_NAND_AT91_BUSWIDTH_16)
+#if defined(CONFIG_MTD_NAND_ATMEL_BUSWIDTH_16)
 	.bus_width_16	= 1,
 #else
 	.bus_width_16	= 0,
diff --git a/arch/arm/mach-at91/board-sam9g20ek.c b/arch/arm/mach-at91/board-sam9g20ek.c
index 45617c201240..d4eba5c0ce02 100644
--- a/arch/arm/mach-at91/board-sam9g20ek.c
+++ b/arch/arm/mach-at91/board-sam9g20ek.c
@@ -26,7 +26,7 @@
 #include <linux/spi/at73c213.h>
 #include <linux/clk.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/setup.h>
 #include <asm/mach-types.h>
 #include <asm/irq.h>
@@ -35,8 +35,8 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
-#include <asm/arch/board.h>
-#include <asm/arch/gpio.h>
+#include <mach/board.h>
+#include <mach/gpio.h>
 
 #include "generic.h"
 
@@ -143,13 +143,13 @@ static struct mtd_partition * __init nand_partitions(int size, int *num_partitio
 }
 
 /* det_pin is not connected */
-static struct at91_nand_data __initdata ek_nand_data = {
+static struct atmel_nand_data __initdata ek_nand_data = {
 	.ale		= 21,
 	.cle		= 22,
 	.rdy_pin	= AT91_PIN_PC13,
 	.enable_pin	= AT91_PIN_PC14,
 	.partition_info	= nand_partitions,
-#if defined(CONFIG_MTD_NAND_AT91_BUSWIDTH_16)
+#if defined(CONFIG_MTD_NAND_ATMEL_BUSWIDTH_16)
 	.bus_width_16	= 1,
 #else
 	.bus_width_16	= 0,
diff --git a/arch/arm/mach-at91/board-sam9rlek.c b/arch/arm/mach-at91/board-sam9rlek.c
index b6a70fc735c3..c6dce49c388c 100644
--- a/arch/arm/mach-at91/board-sam9rlek.c
+++ b/arch/arm/mach-at91/board-sam9rlek.c
@@ -18,7 +18,7 @@
 
 #include <video/atmel_lcdc.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/setup.h>
 #include <asm/mach-types.h>
 #include <asm/irq.h>
@@ -27,9 +27,9 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
-#include <asm/arch/board.h>
-#include <asm/arch/gpio.h>
-#include <asm/arch/at91sam9_smc.h>
+#include <mach/board.h>
+#include <mach/gpio.h>
+#include <mach/at91sam9_smc.h>
 
 #include "generic.h"
 
@@ -96,7 +96,7 @@ static struct mtd_partition * __init nand_partitions(int size, int *num_partitio
 	return ek_nand_partition;
 }
 
-static struct at91_nand_data __initdata ek_nand_data = {
+static struct atmel_nand_data __initdata ek_nand_data = {
 	.ale		= 21,
 	.cle		= 22,
 //	.det_pin	= ... not connected
diff --git a/arch/arm/mach-at91/board-usb-a9260.c b/arch/arm/mach-at91/board-usb-a9260.c
index 837aedf8ffeb..f9d0b65da40b 100644
--- a/arch/arm/mach-at91/board-usb-a9260.c
+++ b/arch/arm/mach-at91/board-usb-a9260.c
@@ -30,7 +30,7 @@
 #include <linux/input.h>
 #include <linux/clk.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/setup.h>
 #include <asm/mach-types.h>
 #include <asm/irq.h>
@@ -39,9 +39,9 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
-#include <asm/arch/board.h>
-#include <asm/arch/gpio.h>
-#include <asm/arch/at91_shdwc.h>
+#include <mach/board.h>
+#include <mach/gpio.h>
+#include <mach/at91_shdwc.h>
 
 #include "generic.h"
 
@@ -114,14 +114,14 @@ static struct mtd_partition * __init nand_partitions(int size, int *num_partitio
 	return ek_nand_partition;
 }
 
-static struct at91_nand_data __initdata ek_nand_data = {
+static struct atmel_nand_data __initdata ek_nand_data = {
 	.ale		= 21,
 	.cle		= 22,
 //	.det_pin	= ... not connected
 	.rdy_pin	= AT91_PIN_PC13,
 	.enable_pin	= AT91_PIN_PC14,
 	.partition_info	= nand_partitions,
-#if defined(CONFIG_MTD_NAND_AT91_BUSWIDTH_16)
+#if defined(CONFIG_MTD_NAND_ATMEL_BUSWIDTH_16)
 	.bus_width_16	= 1,
 #else
 	.bus_width_16	= 0,
diff --git a/arch/arm/mach-at91/board-usb-a9263.c b/arch/arm/mach-at91/board-usb-a9263.c
index 95800d32bd49..673e5c27214d 100644
--- a/arch/arm/mach-at91/board-usb-a9263.c
+++ b/arch/arm/mach-at91/board-usb-a9263.c
@@ -29,7 +29,7 @@
 #include <linux/gpio_keys.h>
 #include <linux/input.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/setup.h>
 #include <asm/mach-types.h>
 #include <asm/irq.h>
@@ -38,9 +38,9 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
-#include <asm/arch/board.h>
-#include <asm/arch/gpio.h>
-#include <asm/arch/at91_shdwc.h>
+#include <mach/board.h>
+#include <mach/gpio.h>
+#include <mach/at91_shdwc.h>
 
 #include "generic.h"
 
@@ -127,14 +127,14 @@ static struct mtd_partition * __init nand_partitions(int size, int *num_partitio
 	return ek_nand_partition;
 }
 
-static struct at91_nand_data __initdata ek_nand_data = {
+static struct atmel_nand_data __initdata ek_nand_data = {
 	.ale		= 21,
 	.cle		= 22,
 //	.det_pin	= ... not connected
 	.rdy_pin	= AT91_PIN_PA22,
 	.enable_pin	= AT91_PIN_PD15,
 	.partition_info	= nand_partitions,
-#if defined(CONFIG_MTD_NAND_AT91_BUSWIDTH_16)
+#if defined(CONFIG_MTD_NAND_ATMEL_BUSWIDTH_16)
 	.bus_width_16	= 1,
 #else
 	.bus_width_16	= 0,
diff --git a/arch/arm/mach-at91/board-yl-9200.c b/arch/arm/mach-at91/board-yl-9200.c
index 7079050ab88d..36b380aad006 100755..100644
--- a/arch/arm/mach-at91/board-yl-9200.c
+++ b/arch/arm/mach-at91/board-yl-9200.c
@@ -33,7 +33,7 @@
 #include <linux/gpio_keys.h>
 #include <linux/input.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/setup.h>
 #include <asm/mach-types.h>
 #include <asm/irq.h>
@@ -42,9 +42,9 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
-#include <asm/arch/board.h>
-#include <asm/arch/gpio.h>
-#include <asm/arch/at91rm9200_mc.h>
+#include <mach/board.h>
+#include <mach/gpio.h>
+#include <mach/at91rm9200_mc.h>
 
 #include "generic.h"
 
@@ -180,7 +180,7 @@ static struct mtd_partition * __init nand_partitions(int size, int *num_partitio
 	return yl9200_nand_partition;
 }
 
-static struct at91_nand_data __initdata yl9200_nand_data = {
+static struct atmel_nand_data __initdata yl9200_nand_data = {
 	.ale		= 6,
 	.cle		= 7,
 	// .det_pin	= ... not connected
diff --git a/arch/arm/mach-at91/clock.c b/arch/arm/mach-at91/clock.c
index 464bdbbf74df..f5c2847161f5 100644
--- a/arch/arm/mach-at91/clock.c
+++ b/arch/arm/mach-at91/clock.c
@@ -24,11 +24,10 @@
 #include <linux/clk.h>
 
 #include <asm/io.h>
-#include <asm/mach-types.h>
 
-#include <asm/hardware.h>
-#include <asm/arch/at91_pmc.h>
-#include <asm/arch/cpu.h>
+#include <mach/hardware.h>
+#include <mach/at91_pmc.h>
+#include <mach/cpu.h>
 
 #include "clock.h"
 
diff --git a/arch/arm/mach-at91/gpio.c b/arch/arm/mach-at91/gpio.c
index ee4964abcaf5..8392d5b517f1 100644
--- a/arch/arm/mach-at91/gpio.c
+++ b/arch/arm/mach-at91/gpio.c
@@ -20,9 +20,9 @@
 #include <linux/module.h>
 
 #include <asm/io.h>
-#include <asm/hardware.h>
-#include <asm/arch/at91_pio.h>
-#include <asm/arch/gpio.h>
+#include <mach/hardware.h>
+#include <mach/at91_pio.h>
+#include <mach/gpio.h>
 
 #include "generic.h"
 
diff --git a/include/asm-arm/arch-at91/at91_adc.h b/arch/arm/mach-at91/include/mach/at91_adc.h
index 6d71ea2637b1..8e7ed5c90817 100644
--- a/include/asm-arm/arch-at91/at91_adc.h
+++ b/arch/arm/mach-at91/include/mach/at91_adc.h
@@ -1,5 +1,5 @@
 /*
- * include/asm-arm/arch-at91/at91_adc.h
+ * arch/arm/mach-at91/include/mach/at91_adc.h
  *
  * Copyright (C) SAN People
  *
diff --git a/include/asm-arm/arch-at91/at91_aic.h b/arch/arm/mach-at91/include/mach/at91_aic.h
index df44c12a12d4..03566799d3be 100644
--- a/include/asm-arm/arch-at91/at91_aic.h
+++ b/arch/arm/mach-at91/include/mach/at91_aic.h
@@ -1,5 +1,5 @@
 /*
- * include/asm-arm/arch-at91/at91_aic.h
+ * arch/arm/mach-at91/include/mach/at91_aic.h
  *
  * Copyright (C) 2005 Ivan Kokshaysky
  * Copyright (C) SAN People
diff --git a/include/asm-arm/arch-at91/at91_dbgu.h b/arch/arm/mach-at91/include/mach/at91_dbgu.h
index 8019ffd0ad3b..6dcaa7716871 100644
--- a/include/asm-arm/arch-at91/at91_dbgu.h
+++ b/arch/arm/mach-at91/include/mach/at91_dbgu.h
@@ -1,5 +1,5 @@
 /*
- * include/asm-arm/arch-at91/at91_dbgu.h
+ * arch/arm/mach-at91/include/mach/at91_dbgu.h
  *
  * Copyright (C) 2005 Ivan Kokshaysky
  * Copyright (C) SAN People
diff --git a/include/asm-arm/arch-at91/at91_mci.h b/arch/arm/mach-at91/include/mach/at91_mci.h
index 400ec10014b4..550d503a1bca 100644
--- a/include/asm-arm/arch-at91/at91_mci.h
+++ b/arch/arm/mach-at91/include/mach/at91_mci.h
@@ -1,5 +1,5 @@
 /*
- * include/asm-arm/arch-at91/at91_mci.h
+ * arch/arm/mach-at91/include/mach/at91_mci.h
  *
  * Copyright (C) 2005 Ivan Kokshaysky
  * Copyright (C) SAN People
diff --git a/include/asm-arm/arch-at91/at91_pio.h b/arch/arm/mach-at91/include/mach/at91_pio.h
index 84c3866d309f..c6a31bf8a5c6 100644
--- a/include/asm-arm/arch-at91/at91_pio.h
+++ b/arch/arm/mach-at91/include/mach/at91_pio.h
@@ -1,5 +1,5 @@
 /*
- * include/asm-arm/arch-at91/at91_pio.h
+ * arch/arm/mach-at91/include/mach/at91_pio.h
  *
  * Copyright (C) 2005 Ivan Kokshaysky
  * Copyright (C) SAN People
diff --git a/include/asm-arm/arch-at91/at91_pit.h b/arch/arm/mach-at91/include/mach/at91_pit.h
index 5026325a5ae4..0448ac36eadb 100644
--- a/include/asm-arm/arch-at91/at91_pit.h
+++ b/arch/arm/mach-at91/include/mach/at91_pit.h
@@ -1,5 +1,5 @@
 /*
- * include/asm-arm/arch-at91/at91_pit.h
+ * arch/arm/mach-at91/include/mach/at91_pit.h
  *
  * Periodic Interval Timer (PIT) - System peripherals regsters.
  * Based on AT91SAM9261 datasheet revision D.
diff --git a/include/asm-arm/arch-at91/at91_pmc.h b/arch/arm/mach-at91/include/mach/at91_pmc.h
index 2001e81f2267..2e3f2894b704 100644
--- a/include/asm-arm/arch-at91/at91_pmc.h
+++ b/arch/arm/mach-at91/include/mach/at91_pmc.h
@@ -1,5 +1,5 @@
 /*
- * include/asm-arm/arch-at91/at91_pmc.h
+ * arch/arm/mach-at91/include/mach/at91_pmc.h
  *
  * Copyright (C) 2005 Ivan Kokshaysky
  * Copyright (C) SAN People
diff --git a/include/asm-arm/arch-at91/at91_rstc.h b/arch/arm/mach-at91/include/mach/at91_rstc.h
index fb8d1618a231..7cd1b39aaa43 100644
--- a/include/asm-arm/arch-at91/at91_rstc.h
+++ b/arch/arm/mach-at91/include/mach/at91_rstc.h
@@ -1,5 +1,5 @@
 /*
- * include/asm-arm/arch-at91/at91_rstc.h
+ * arch/arm/mach-at91/include/mach/at91_rstc.h
  *
  * Reset Controller (RSTC) - System peripherals regsters.
  * Based on AT91SAM9261 datasheet revision D.
diff --git a/include/asm-arm/arch-at91/at91_rtc.h b/arch/arm/mach-at91/include/mach/at91_rtc.h
index af9bd28174c0..e56f4701a3e5 100644
--- a/include/asm-arm/arch-at91/at91_rtc.h
+++ b/arch/arm/mach-at91/include/mach/at91_rtc.h
@@ -1,5 +1,5 @@
 /*
- * include/asm-arm/arch-at91/at91_rtc.h
+ * arch/arm/mach-at91/include/mach/at91_rtc.h
  *
  * Copyright (C) 2005 Ivan Kokshaysky
  * Copyright (C) SAN People
diff --git a/include/asm-arm/arch-at91/at91_rtt.h b/arch/arm/mach-at91/include/mach/at91_rtt.h
index 39a32633b275..71782e5d2159 100644
--- a/include/asm-arm/arch-at91/at91_rtt.h
+++ b/arch/arm/mach-at91/include/mach/at91_rtt.h
@@ -1,5 +1,5 @@
 /*
- * include/asm-arm/arch-at91/at91_rtt.h
+ * arch/arm/mach-at91/include/mach/at91_rtt.h
  *
  * Real-time Timer (RTT) - System peripherals regsters.
  * Based on AT91SAM9261 datasheet revision D.
diff --git a/include/asm-arm/arch-at91/at91_shdwc.h b/arch/arm/mach-at91/include/mach/at91_shdwc.h
index 581fa41d90e8..60be5ae624f1 100644
--- a/include/asm-arm/arch-at91/at91_shdwc.h
+++ b/arch/arm/mach-at91/include/mach/at91_shdwc.h
@@ -1,5 +1,5 @@
 /*
- * include/asm-arm/arch-at91/at91_shdwc.h
+ * arch/arm/mach-at91/include/mach/at91_shdwc.h
  *
  * Shutdown Controller (SHDWC) - System peripherals regsters.
  * Based on AT91SAM9261 datasheet revision D.
diff --git a/include/asm-arm/arch-at91/at91_spi.h b/arch/arm/mach-at91/include/mach/at91_spi.h
index f9b9a8464997..2f6ba0c5636e 100644
--- a/include/asm-arm/arch-at91/at91_spi.h
+++ b/arch/arm/mach-at91/include/mach/at91_spi.h
@@ -1,5 +1,5 @@
 /*
- * include/asm-arm/arch-at91/at91_spi.h
+ * arch/arm/mach-at91/include/mach/at91_spi.h
  *
  * Copyright (C) 2005 Ivan Kokshaysky
  * Copyright (C) SAN People
diff --git a/include/asm-arm/arch-at91/at91_ssc.h b/arch/arm/mach-at91/include/mach/at91_ssc.h
index 0ecc73460b50..a81114c11c74 100644
--- a/include/asm-arm/arch-at91/at91_ssc.h
+++ b/arch/arm/mach-at91/include/mach/at91_ssc.h
@@ -1,5 +1,5 @@
 /*
- * include/asm-arm/arch-at91/at91_ssc.h
+ * arch/arm/mach-at91/include/mach/at91_ssc.h
  *
  * Copyright (C) SAN People
  *
diff --git a/include/asm-arm/arch-at91/at91_st.h b/arch/arm/mach-at91/include/mach/at91_st.h
index 30446e2ea772..8847173e4101 100644
--- a/include/asm-arm/arch-at91/at91_st.h
+++ b/arch/arm/mach-at91/include/mach/at91_st.h
@@ -1,5 +1,5 @@
 /*
- * include/asm-arm/arch-at91/at91_st.h
+ * arch/arm/mach-at91/include/mach/at91_st.h
  *
  * Copyright (C) 2005 Ivan Kokshaysky
  * Copyright (C) SAN People
diff --git a/include/asm-arm/arch-at91/at91_tc.h b/arch/arm/mach-at91/include/mach/at91_tc.h
index b85d3faeef5c..46a317fd7164 100644
--- a/include/asm-arm/arch-at91/at91_tc.h
+++ b/arch/arm/mach-at91/include/mach/at91_tc.h
@@ -1,5 +1,5 @@
 /*
- * include/asm-arm/arch-at91/at91_tc.h
+ * arch/arm/mach-at91/include/mach/at91_tc.h
  *
  * Copyright (C) SAN People
  *
diff --git a/include/asm-arm/arch-at91/at91_twi.h b/arch/arm/mach-at91/include/mach/at91_twi.h
index f9f2e3cd95c5..bb2880f6ba37 100644
--- a/include/asm-arm/arch-at91/at91_twi.h
+++ b/arch/arm/mach-at91/include/mach/at91_twi.h
@@ -1,5 +1,5 @@
 /*
- * include/asm-arm/arch-at91/at91_twi.h
+ * arch/arm/mach-at91/include/mach/at91_twi.h
  *
  * Copyright (C) 2005 Ivan Kokshaysky
  * Copyright (C) SAN People
diff --git a/include/asm-arm/arch-at91/at91_wdt.h b/arch/arm/mach-at91/include/mach/at91_wdt.h
index 1014e9bf181f..973b4526a98e 100644
--- a/include/asm-arm/arch-at91/at91_wdt.h
+++ b/arch/arm/mach-at91/include/mach/at91_wdt.h
@@ -1,5 +1,5 @@
 /*
- * include/asm-arm/arch-at91/at91_wdt.h
+ * arch/arm/mach-at91/include/mach/at91_wdt.h
  *
  * Watchdog Timer (WDT) - System peripherals regsters.
  * Based on AT91SAM9261 datasheet revision D.
diff --git a/include/asm-arm/arch-at91/at91cap9.h b/arch/arm/mach-at91/include/mach/at91cap9.h
index 6f14d9053ac7..4a4b64135a92 100644
--- a/include/asm-arm/arch-at91/at91cap9.h
+++ b/arch/arm/mach-at91/include/mach/at91cap9.h
@@ -1,5 +1,5 @@
 /*
- * include/asm-arm/arch-at91/at91cap9.h
+ * arch/arm/mach-at91/include/mach/at91cap9.h
  *
  *  Copyright (C) 2007 Stelian Pop <stelian.pop@leadtechdesign.com>
  *  Copyright (C) 2007 Lead Tech Design <www.leadtechdesign.com>
diff --git a/include/asm-arm/arch-at91/at91cap9_ddrsdr.h b/arch/arm/mach-at91/include/mach/at91cap9_ddrsdr.h
index efdb23af1ee4..bca878f3bd87 100644
--- a/include/asm-arm/arch-at91/at91cap9_ddrsdr.h
+++ b/arch/arm/mach-at91/include/mach/at91cap9_ddrsdr.h
@@ -1,5 +1,5 @@
 /*
- * include/asm-arm/arch-at91/at91cap9_ddrsdr.h
+ * arch/arm/mach-at91/include/mach/at91cap9_ddrsdr.h
  *
  * DDR/SDR Controller (DDRSDRC) - System peripherals registers.
  * Based on AT91CAP9 datasheet revision B.
diff --git a/include/asm-arm/arch-at91/at91cap9_matrix.h b/arch/arm/mach-at91/include/mach/at91cap9_matrix.h
index ddbd4873c842..4b9d4aff4b4f 100644
--- a/include/asm-arm/arch-at91/at91cap9_matrix.h
+++ b/arch/arm/mach-at91/include/mach/at91cap9_matrix.h
@@ -1,5 +1,5 @@
 /*
- * include/asm-arm/arch-at91/at91cap9_matrix.h
+ * arch/arm/mach-at91/include/mach/at91cap9_matrix.h
  *
  *  Copyright (C) 2007 Stelian Pop <stelian.pop@leadtechdesign.com>
  *  Copyright (C) 2007 Lead Tech Design <www.leadtechdesign.com>
diff --git a/include/asm-arm/arch-at91/at91rm9200.h b/arch/arm/mach-at91/include/mach/at91rm9200.h
index e8fc0b1c33f4..78983155a074 100644
--- a/include/asm-arm/arch-at91/at91rm9200.h
+++ b/arch/arm/mach-at91/include/mach/at91rm9200.h
@@ -1,5 +1,5 @@
 /*
- * include/asm-arm/arch-at91/at91rm9200.h
+ * arch/arm/mach-at91/include/mach/at91rm9200.h
  *
  * Copyright (C) 2005 Ivan Kokshaysky
  * Copyright (C) SAN People
diff --git a/include/asm-arm/arch-at91/at91rm9200_emac.h b/arch/arm/mach-at91/include/mach/at91rm9200_emac.h
index 0c417af5fe7f..b8260cd8041c 100644
--- a/include/asm-arm/arch-at91/at91rm9200_emac.h
+++ b/arch/arm/mach-at91/include/mach/at91rm9200_emac.h
@@ -1,5 +1,5 @@
 /*
- * include/asm-arm/arch-at91/at91rm9200_emac.h
+ * arch/arm/mach-at91/include/mach/at91rm9200_emac.h
  *
  * Copyright (C) 2005 Ivan Kokshaysky
  * Copyright (C) SAN People
diff --git a/include/asm-arm/arch-at91/at91rm9200_mc.h b/arch/arm/mach-at91/include/mach/at91rm9200_mc.h
index 24d012939cc4..d34e4ed89349 100644
--- a/include/asm-arm/arch-at91/at91rm9200_mc.h
+++ b/arch/arm/mach-at91/include/mach/at91rm9200_mc.h
@@ -1,5 +1,5 @@
 /*
- * include/asm-arm/arch-at91/at91rm9200_mc.h
+ * arch/arm/mach-at91/include/mach/at91rm9200_mc.h
  *
  * Copyright (C) 2005 Ivan Kokshaysky
  * Copyright (C) SAN People
diff --git a/include/asm-arm/arch-at91/at91sam9260.h b/arch/arm/mach-at91/include/mach/at91sam9260.h
index 889872a3f2a9..43c396b9b4cb 100644
--- a/include/asm-arm/arch-at91/at91sam9260.h
+++ b/arch/arm/mach-at91/include/mach/at91sam9260.h
@@ -1,5 +1,5 @@
 /*
- * include/asm-arm/arch-at91/at91sam9260.h
+ * arch/arm/mach-at91/include/mach/at91sam9260.h
  *
  * (C) 2006 Andrew Victor
  *
diff --git a/include/asm-arm/arch-at91/at91sam9260_matrix.h b/arch/arm/mach-at91/include/mach/at91sam9260_matrix.h
index a8e9fec6c735..f027de5df956 100644
--- a/include/asm-arm/arch-at91/at91sam9260_matrix.h
+++ b/arch/arm/mach-at91/include/mach/at91sam9260_matrix.h
@@ -1,5 +1,5 @@
 /*
- * include/asm-arm/arch-at91/at91sam9260_matrix.h
+ * arch/arm/mach-at91/include/mach/at91sam9260_matrix.h
  *
  * Memory Controllers (MATRIX, EBI) - System peripherals registers.
  * Based on AT91SAM9260 datasheet revision B.
diff --git a/include/asm-arm/arch-at91/at91sam9261.h b/arch/arm/mach-at91/include/mach/at91sam9261.h
index c7c4778dac49..3a348ca20773 100644
--- a/include/asm-arm/arch-at91/at91sam9261.h
+++ b/arch/arm/mach-at91/include/mach/at91sam9261.h
@@ -1,5 +1,5 @@
 /*
- * include/asm-arm/arch-at91/at91sam9261.h
+ * arch/arm/mach-at91/include/mach/at91sam9261.h
  *
  * Copyright (C) SAN People
  *
diff --git a/include/asm-arm/arch-at91/at91sam9261_matrix.h b/arch/arm/mach-at91/include/mach/at91sam9261_matrix.h
index 6f072421be5b..db62b1f18300 100644
--- a/include/asm-arm/arch-at91/at91sam9261_matrix.h
+++ b/arch/arm/mach-at91/include/mach/at91sam9261_matrix.h
@@ -1,5 +1,5 @@
 /*
- * include/asm-arm/arch-at91/at91sam9261_matrix.h
+ * arch/arm/mach-at91/include/mach/at91sam9261_matrix.h
  *
  * Memory Controllers (MATRIX, EBI) - System peripherals registers.
  * Based on AT91SAM9261 datasheet revision D.
diff --git a/include/asm-arm/arch-at91/at91sam9263.h b/arch/arm/mach-at91/include/mach/at91sam9263.h
index 018a647311da..2091f1e42d43 100644
--- a/include/asm-arm/arch-at91/at91sam9263.h
+++ b/arch/arm/mach-at91/include/mach/at91sam9263.h
@@ -1,5 +1,5 @@
 /*
- * include/asm-arm/arch-at91/at91sam9263.h
+ * arch/arm/mach-at91/include/mach/at91sam9263.h
  *
  * (C) 2007 Atmel Corporation.
  *
diff --git a/include/asm-arm/arch-at91/at91sam9263_matrix.h b/arch/arm/mach-at91/include/mach/at91sam9263_matrix.h
index 72f6e668e414..9b3efd3eb2f3 100644
--- a/include/asm-arm/arch-at91/at91sam9263_matrix.h
+++ b/arch/arm/mach-at91/include/mach/at91sam9263_matrix.h
@@ -1,5 +1,5 @@
 /*
- * include/asm-arm/arch-at91/at91sam9263_matrix.h
+ * arch/arm/mach-at91/include/mach/at91sam9263_matrix.h
  *
  *  Copyright (C) 2006 Atmel Corporation.
  *
diff --git a/include/asm-arm/arch-at91/at91sam9_sdramc.h b/arch/arm/mach-at91/include/mach/at91sam9_sdramc.h
index d3b8b3da6b4d..1921181c63ca 100644
--- a/include/asm-arm/arch-at91/at91sam9_sdramc.h
+++ b/arch/arm/mach-at91/include/mach/at91sam9_sdramc.h
@@ -1,5 +1,5 @@
 /*
- * include/asm-arm/arch-at91/at91sam9_sdramc.h
+ * arch/arm/mach-at91/include/mach/at91sam9_sdramc.h
  *
  * SDRAM Controllers (SDRAMC) - System peripherals registers.
  * Based on AT91SAM9261 datasheet revision D.
diff --git a/include/asm-arm/arch-at91/at91sam9_smc.h b/arch/arm/mach-at91/include/mach/at91sam9_smc.h
index 9e49eed31e50..ec6ad1338b5a 100644
--- a/include/asm-arm/arch-at91/at91sam9_smc.h
+++ b/arch/arm/mach-at91/include/mach/at91sam9_smc.h
@@ -1,5 +1,5 @@
 /*
- * include/asm-arm/arch-at91/at91sam9_smc.h
+ * arch/arm/mach-at91/include/mach/at91sam9_smc.h
  *
  * Static Memory Controllers (SMC) - System peripherals registers.
  * Based on AT91SAM9261 datasheet revision D.
diff --git a/include/asm-arm/arch-at91/at91sam9rl.h b/arch/arm/mach-at91/include/mach/at91sam9rl.h
index 622e56f81d42..fc2de6c09c86 100644
--- a/include/asm-arm/arch-at91/at91sam9rl.h
+++ b/arch/arm/mach-at91/include/mach/at91sam9rl.h
@@ -1,5 +1,5 @@
 /*
- * include/asm-arm/arch-at91/at91sam9260.h
+ * arch/arm/mach-at91/include/mach/at91sam9260.h
  *
  *  Copyright (C) 2007 Atmel Corporation
  *
diff --git a/include/asm-arm/arch-at91/at91sam9rl_matrix.h b/arch/arm/mach-at91/include/mach/at91sam9rl_matrix.h
index 84224174e6a1..5f9149071fe5 100644
--- a/include/asm-arm/arch-at91/at91sam9rl_matrix.h
+++ b/arch/arm/mach-at91/include/mach/at91sam9rl_matrix.h
@@ -1,5 +1,5 @@
 /*
- * include/asm-arm/arch-at91/at91sam9rl_matrix.h
+ * arch/arm/mach-at91/include/mach/at91sam9rl_matrix.h
  *
  *  Copyright (C) 2007 Atmel Corporation
  *
diff --git a/include/asm-arm/arch-at91/at91x40.h b/arch/arm/mach-at91/include/mach/at91x40.h
index 612203e0177f..d34cdb8abdca 100644
--- a/include/asm-arm/arch-at91/at91x40.h
+++ b/arch/arm/mach-at91/include/mach/at91x40.h
@@ -1,5 +1,5 @@
 /*
- * include/asm-arm/arch-at91/at91x40.h
+ * arch/arm/mach-at91/include/mach/at91x40.h
  *
  * (C) Copyright 2007, Greg Ungerer <gerg@snapgear.com>
  *
diff --git a/arch/arm/mach-at91/include/mach/board.h b/arch/arm/mach-at91/include/mach/board.h
new file mode 100644
index 000000000000..acd60f2a0724
--- /dev/null
+++ b/arch/arm/mach-at91/include/mach/board.h
@@ -0,0 +1,172 @@
+/*
+ * arch/arm/mach-at91/include/mach/board.h
+ *
+ *  Copyright (C) 2005 HP Labs
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+/*
+ * These are data structures found in platform_device.dev.platform_data,
+ * and describing board-specific data needed by drivers.  For example,
+ * which pin is used for a given GPIO role.
+ *
+ * In 2.6, drivers should strongly avoid board-specific knowledge so
+ * that supporting new boards normally won't require driver patches.
+ * Most board-specific knowledge should be in arch/.../board-*.c files.
+ */
+
+#ifndef __ASM_ARCH_BOARD_H
+#define __ASM_ARCH_BOARD_H
+
+#include <linux/mtd/partitions.h>
+#include <linux/device.h>
+#include <linux/i2c.h>
+#include <linux/leds.h>
+#include <linux/spi/spi.h>
+#include <linux/usb/atmel_usba_udc.h>
+
+ /* USB Device */
+struct at91_udc_data {
+	u8	vbus_pin;		/* high == host powering us */
+	u8	pullup_pin;		/* active == D+ pulled up */
+	u8	pullup_active_low;	/* true == pullup_pin is active low */
+};
+extern void __init at91_add_device_udc(struct at91_udc_data *data);
+
+ /* USB High Speed Device */
+extern void __init at91_add_device_usba(struct usba_platform_data *data);
+
+ /* Compact Flash */
+struct at91_cf_data {
+	u8	irq_pin;		/* I/O IRQ */
+	u8	det_pin;		/* Card detect */
+	u8	vcc_pin;		/* power switching */
+	u8	rst_pin;		/* card reset */
+	u8	chipselect;		/* EBI Chip Select number */
+};
+extern void __init at91_add_device_cf(struct at91_cf_data *data);
+
+ /* MMC / SD */
+struct at91_mmc_data {
+	u8		det_pin;	/* card detect IRQ */
+	unsigned	slot_b:1;	/* uses Slot B */
+	unsigned	wire4:1;	/* (SD) supports DAT0..DAT3 */
+	u8		wp_pin;		/* (SD) writeprotect detect */
+	u8		vcc_pin;	/* power switching (high == on) */
+};
+extern void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data);
+
+ /* Ethernet (EMAC & MACB) */
+struct at91_eth_data {
+	u32		phy_mask;
+	u8		phy_irq_pin;	/* PHY IRQ */
+	u8		is_rmii;	/* using RMII interface? */
+};
+extern void __init at91_add_device_eth(struct at91_eth_data *data);
+
+#if defined(CONFIG_ARCH_AT91SAM9260) || defined(CONFIG_ARCH_AT91SAM9263) || defined(CONFIG_ARCH_AT91SAM9G20) || defined(CONFIG_ARCH_AT91CAP9)
+#define eth_platform_data	at91_eth_data
+#endif
+
+ /* USB Host */
+struct at91_usbh_data {
+	u8		ports;		/* number of ports on root hub */
+	u8		vbus_pin[];	/* port power-control pin */
+};
+extern void __init at91_add_device_usbh(struct at91_usbh_data *data);
+
+ /* NAND / SmartMedia */
+struct atmel_nand_data {
+	u8		enable_pin;	/* chip enable */
+	u8		det_pin;	/* card detect */
+	u8		rdy_pin;	/* ready/busy */
+	u8		ale;		/* address line number connected to ALE */
+	u8		cle;		/* address line number connected to CLE */
+	u8		bus_width_16;	/* buswidth is 16 bit */
+	struct mtd_partition* (*partition_info)(int, int*);
+};
+extern void __init at91_add_device_nand(struct atmel_nand_data *data);
+
+ /* I2C*/
+extern void __init at91_add_device_i2c(struct i2c_board_info *devices, int nr_devices);
+
+ /* SPI */
+extern void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices);
+
+ /* Serial */
+#define ATMEL_UART_CTS	0x01
+#define ATMEL_UART_RTS	0x02
+#define ATMEL_UART_DSR	0x04
+#define ATMEL_UART_DTR	0x08
+#define ATMEL_UART_DCD	0x10
+#define ATMEL_UART_RI	0x20
+
+extern void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins);
+extern void __init at91_set_serial_console(unsigned portnr);
+
+struct at91_uart_config {
+	unsigned short	console_tty;	/* tty number of serial console */
+	unsigned short	nr_tty;		/* number of serial tty's */
+	short		tty_map[];	/* map UART to tty number */
+};
+extern struct platform_device *atmel_default_console_device;
+extern void __init __deprecated at91_init_serial(struct at91_uart_config *config);
+
+struct atmel_uart_data {
+	short		use_dma_tx;	/* use transmit DMA? */
+	short		use_dma_rx;	/* use receive DMA? */
+	void __iomem	*regs;		/* virtual base address, if any */
+};
+extern void __init at91_add_device_serial(void);
+
+/*
+ * SSC -- accessed through ssc_request(id).  Drivers don't bind to SSC
+ * platform devices.  Their SSC ID is part of their configuration data,
+ * along with information about which SSC signals they should use.
+ */
+#define ATMEL_SSC_TK	0x01
+#define ATMEL_SSC_TF	0x02
+#define ATMEL_SSC_TD	0x04
+#define ATMEL_SSC_TX	(ATMEL_SSC_TK | ATMEL_SSC_TF | ATMEL_SSC_TD)
+
+#define ATMEL_SSC_RK	0x10
+#define ATMEL_SSC_RF	0x20
+#define ATMEL_SSC_RD	0x40
+#define ATMEL_SSC_RX	(ATMEL_SSC_RK | ATMEL_SSC_RF | ATMEL_SSC_RD)
+
+extern void __init at91_add_device_ssc(unsigned id, unsigned pins);
+
+ /* LCD Controller */
+struct atmel_lcdfb_info;
+extern void __init at91_add_device_lcdc(struct atmel_lcdfb_info *data);
+
+ /* AC97 */
+struct atmel_ac97_data {
+	u8		reset_pin;	/* reset */
+};
+extern void __init at91_add_device_ac97(struct atmel_ac97_data *data);
+
+ /* ISI */
+extern void __init at91_add_device_isi(void);
+
+ /* LEDs */
+extern void __init at91_init_leds(u8 cpu_led, u8 timer_led);
+extern void __init at91_gpio_leds(struct gpio_led *leds, int nr);
+
+/* FIXME: this needs a better location, but gets stuff building again */
+extern int at91_suspend_entering_slow_clock(void);
+
+#endif
diff --git a/arch/arm/mach-at91/include/mach/cpu.h b/arch/arm/mach-at91/include/mach/cpu.h
new file mode 100644
index 000000000000..dbfd9f73f80b
--- /dev/null
+++ b/arch/arm/mach-at91/include/mach/cpu.h
@@ -0,0 +1,103 @@
+/*
+ * arch/arm/mach-at91/include/mach/cpu.h
+ *
+ *  Copyright (C) 2006 SAN People
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ */
+
+#ifndef __ASM_ARCH_CPU_H
+#define __ASM_ARCH_CPU_H
+
+#include <mach/hardware.h>
+#include <mach/at91_dbgu.h>
+
+
+#define ARCH_ID_AT91RM9200	0x09290780
+#define ARCH_ID_AT91SAM9260	0x019803a0
+#define ARCH_ID_AT91SAM9261	0x019703a0
+#define ARCH_ID_AT91SAM9263	0x019607a0
+#define ARCH_ID_AT91SAM9G20	0x019905a0
+#define ARCH_ID_AT91SAM9RL64	0x019b03a0
+#define ARCH_ID_AT91CAP9	0x039A03A0
+
+#define ARCH_ID_AT91SAM9XE128	0x329973a0
+#define ARCH_ID_AT91SAM9XE256	0x329a93a0
+#define ARCH_ID_AT91SAM9XE512	0x329aa3a0
+
+#define ARCH_ID_AT91M40800	0x14080044
+#define ARCH_ID_AT91R40807	0x44080746
+#define ARCH_ID_AT91M40807	0x14080745
+#define ARCH_ID_AT91R40008	0x44000840
+
+static inline unsigned long at91_cpu_identify(void)
+{
+	return (at91_sys_read(AT91_DBGU_CIDR) & ~AT91_CIDR_VERSION);
+}
+
+
+#define ARCH_FAMILY_AT91X92	0x09200000
+#define ARCH_FAMILY_AT91SAM9	0x01900000
+#define ARCH_FAMILY_AT91SAM9XE	0x02900000
+
+static inline unsigned long at91_arch_identify(void)
+{
+	return (at91_sys_read(AT91_DBGU_CIDR) & AT91_CIDR_ARCH);
+}
+
+
+#ifdef CONFIG_ARCH_AT91RM9200
+#define cpu_is_at91rm9200()	(at91_cpu_identify() == ARCH_ID_AT91RM9200)
+#else
+#define cpu_is_at91rm9200()	(0)
+#endif
+
+#ifdef CONFIG_ARCH_AT91SAM9260
+#define cpu_is_at91sam9xe()	(at91_arch_identify() == ARCH_FAMILY_AT91SAM9XE)
+#define cpu_is_at91sam9260()	((at91_cpu_identify() == ARCH_ID_AT91SAM9260) || cpu_is_at91sam9xe())
+#else
+#define cpu_is_at91sam9xe()	(0)
+#define cpu_is_at91sam9260()	(0)
+#endif
+
+#ifdef CONFIG_ARCH_AT91SAM9G20
+#define cpu_is_at91sam9g20()	(at91_cpu_identify() == ARCH_ID_AT91SAM9G20)
+#else
+#define cpu_is_at91sam9g20()	(0)
+#endif
+
+#ifdef CONFIG_ARCH_AT91SAM9261
+#define cpu_is_at91sam9261()	(at91_cpu_identify() == ARCH_ID_AT91SAM9261)
+#else
+#define cpu_is_at91sam9261()	(0)
+#endif
+
+#ifdef CONFIG_ARCH_AT91SAM9263
+#define cpu_is_at91sam9263()	(at91_cpu_identify() == ARCH_ID_AT91SAM9263)
+#else
+#define cpu_is_at91sam9263()	(0)
+#endif
+
+#ifdef CONFIG_ARCH_AT91SAM9RL
+#define cpu_is_at91sam9rl()	(at91_cpu_identify() == ARCH_ID_AT91SAM9RL64)
+#else
+#define cpu_is_at91sam9rl()	(0)
+#endif
+
+#ifdef CONFIG_ARCH_AT91CAP9
+#define cpu_is_at91cap9()	(at91_cpu_identify() == ARCH_ID_AT91CAP9)
+#else
+#define cpu_is_at91cap9()	(0)
+#endif
+
+/*
+ * Since this is ARM, we will never run on any AVR32 CPU. But these
+ * definitions may reduce clutter in common drivers.
+ */
+#define cpu_is_at32ap7000()	(0)
+
+#endif
diff --git a/arch/arm/mach-at91/include/mach/debug-macro.S b/arch/arm/mach-at91/include/mach/debug-macro.S
new file mode 100644
index 000000000000..29052ba66ada
--- /dev/null
+++ b/arch/arm/mach-at91/include/mach/debug-macro.S
@@ -0,0 +1,39 @@
+/*
+ * arch/arm/mach-at91/include/mach/debug-macro.S
+ *
+ *  Copyright (C) 2003-2005 SAN People
+ *
+ * Debugging macro include header
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+*/
+
+#include <mach/hardware.h>
+#include <mach/at91_dbgu.h>
+
+	.macro	addruart,rx
+	mrc	p15, 0, \rx, c1, c0
+	tst	\rx, #1						@ MMU enabled?
+	ldreq	\rx, =(AT91_BASE_SYS + AT91_DBGU)		@ System peripherals (phys address)
+	ldrne	\rx, =(AT91_VA_BASE_SYS	+ AT91_DBGU)		@ System peripherals (virt address)
+	.endm
+
+	.macro	senduart,rd,rx
+	strb	\rd, [\rx, #(AT91_DBGU_THR - AT91_DBGU)]	@ Write to Transmitter Holding Register
+	.endm
+
+	.macro	waituart,rd,rx
+1001:	ldr	\rd, [\rx, #(AT91_DBGU_SR - AT91_DBGU)]		@ Read Status Register
+	tst	\rd, #AT91_DBGU_TXRDY				@ DBGU_TXRDY = 1 when ready to transmit
+	beq	1001b
+	.endm
+
+	.macro	busyuart,rd,rx
+1001:	ldr	\rd, [\rx, #(AT91_DBGU_SR - AT91_DBGU)]		@ Read Status Register
+	tst	\rd, #AT91_DBGU_TXEMPTY				@ DBGU_TXEMPTY = 1 when transmission complete
+	beq	1001b
+	.endm
+
diff --git a/arch/arm/mach-at91/include/mach/dma.h b/arch/arm/mach-at91/include/mach/dma.h
new file mode 100644
index 000000000000..e4f90c177616
--- /dev/null
+++ b/arch/arm/mach-at91/include/mach/dma.h
@@ -0,0 +1,19 @@
+/*
+ * arch/arm/mach-at91/include/mach/dma.h
+ *
+ *  Copyright (C) 2003 SAN People
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
diff --git a/arch/arm/mach-at91/include/mach/entry-macro.S b/arch/arm/mach-at91/include/mach/entry-macro.S
new file mode 100644
index 000000000000..7ab68f972227
--- /dev/null
+++ b/arch/arm/mach-at91/include/mach/entry-macro.S
@@ -0,0 +1,32 @@
+/*
+ * arch/arm/mach-at91/include/mach/entry-macro.S
+ *
+ *  Copyright (C) 2003-2005 SAN People
+ *
+ * Low-level IRQ helper macros for AT91RM9200 platforms
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <mach/hardware.h>
+#include <mach/at91_aic.h>
+
+	.macro	disable_fiq
+	.endm
+
+	.macro  get_irqnr_preamble, base, tmp
+	ldr	\base, =(AT91_VA_BASE_SYS + AT91_AIC)		@ base virtual address of AIC peripheral
+	.endm
+
+	.macro  arch_ret_to_user, tmp1, tmp2
+	.endm
+
+	.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
+	ldr	\irqnr, [\base, #(AT91_AIC_IVR - AT91_AIC)]	@ read IRQ vector register: de-asserts nIRQ to processor (and clears interrupt)
+	ldr	\irqstat, [\base, #(AT91_AIC_ISR - AT91_AIC)]	@ read interrupt source number
+	teq	\irqstat, #0					@ ISR is 0 when no current interrupt, or spurious interrupt
+	streq	\tmp, [\base, #(AT91_AIC_EOICR - AT91_AIC)]	@ not going to be handled further, then ACK it now.
+	.endm
+
diff --git a/arch/arm/mach-at91/include/mach/gpio.h b/arch/arm/mach-at91/include/mach/gpio.h
new file mode 100644
index 000000000000..76d76e2fa69e
--- /dev/null
+++ b/arch/arm/mach-at91/include/mach/gpio.h
@@ -0,0 +1,252 @@
+/*
+ * arch/arm/mach-at91/include/mach/gpio.h
+ *
+ *  Copyright (C) 2005 HP Labs
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ */
+
+#ifndef __ASM_ARCH_AT91RM9200_GPIO_H
+#define __ASM_ARCH_AT91RM9200_GPIO_H
+
+#include <asm/irq.h>
+
+#define PIN_BASE		NR_AIC_IRQS
+
+#define MAX_GPIO_BANKS		5
+
+/* these pin numbers double as IRQ numbers, like AT91xxx_ID_* values */
+
+#define	AT91_PIN_PA0	(PIN_BASE + 0x00 + 0)
+#define	AT91_PIN_PA1	(PIN_BASE + 0x00 + 1)
+#define	AT91_PIN_PA2	(PIN_BASE + 0x00 + 2)
+#define	AT91_PIN_PA3	(PIN_BASE + 0x00 + 3)
+#define	AT91_PIN_PA4	(PIN_BASE + 0x00 + 4)
+#define	AT91_PIN_PA5	(PIN_BASE + 0x00 + 5)
+#define	AT91_PIN_PA6	(PIN_BASE + 0x00 + 6)
+#define	AT91_PIN_PA7	(PIN_BASE + 0x00 + 7)
+#define	AT91_PIN_PA8	(PIN_BASE + 0x00 + 8)
+#define	AT91_PIN_PA9	(PIN_BASE + 0x00 + 9)
+#define	AT91_PIN_PA10	(PIN_BASE + 0x00 + 10)
+#define	AT91_PIN_PA11	(PIN_BASE + 0x00 + 11)
+#define	AT91_PIN_PA12	(PIN_BASE + 0x00 + 12)
+#define	AT91_PIN_PA13	(PIN_BASE + 0x00 + 13)
+#define	AT91_PIN_PA14	(PIN_BASE + 0x00 + 14)
+#define	AT91_PIN_PA15	(PIN_BASE + 0x00 + 15)
+#define	AT91_PIN_PA16	(PIN_BASE + 0x00 + 16)
+#define	AT91_PIN_PA17	(PIN_BASE + 0x00 + 17)
+#define	AT91_PIN_PA18	(PIN_BASE + 0x00 + 18)
+#define	AT91_PIN_PA19	(PIN_BASE + 0x00 + 19)
+#define	AT91_PIN_PA20	(PIN_BASE + 0x00 + 20)
+#define	AT91_PIN_PA21	(PIN_BASE + 0x00 + 21)
+#define	AT91_PIN_PA22	(PIN_BASE + 0x00 + 22)
+#define	AT91_PIN_PA23	(PIN_BASE + 0x00 + 23)
+#define	AT91_PIN_PA24	(PIN_BASE + 0x00 + 24)
+#define	AT91_PIN_PA25	(PIN_BASE + 0x00 + 25)
+#define	AT91_PIN_PA26	(PIN_BASE + 0x00 + 26)
+#define	AT91_PIN_PA27	(PIN_BASE + 0x00 + 27)
+#define	AT91_PIN_PA28	(PIN_BASE + 0x00 + 28)
+#define	AT91_PIN_PA29	(PIN_BASE + 0x00 + 29)
+#define	AT91_PIN_PA30	(PIN_BASE + 0x00 + 30)
+#define	AT91_PIN_PA31	(PIN_BASE + 0x00 + 31)
+
+#define	AT91_PIN_PB0	(PIN_BASE + 0x20 + 0)
+#define	AT91_PIN_PB1	(PIN_BASE + 0x20 + 1)
+#define	AT91_PIN_PB2	(PIN_BASE + 0x20 + 2)
+#define	AT91_PIN_PB3	(PIN_BASE + 0x20 + 3)
+#define	AT91_PIN_PB4	(PIN_BASE + 0x20 + 4)
+#define	AT91_PIN_PB5	(PIN_BASE + 0x20 + 5)
+#define	AT91_PIN_PB6	(PIN_BASE + 0x20 + 6)
+#define	AT91_PIN_PB7	(PIN_BASE + 0x20 + 7)
+#define	AT91_PIN_PB8	(PIN_BASE + 0x20 + 8)
+#define	AT91_PIN_PB9	(PIN_BASE + 0x20 + 9)
+#define	AT91_PIN_PB10	(PIN_BASE + 0x20 + 10)
+#define	AT91_PIN_PB11	(PIN_BASE + 0x20 + 11)
+#define	AT91_PIN_PB12	(PIN_BASE + 0x20 + 12)
+#define	AT91_PIN_PB13	(PIN_BASE + 0x20 + 13)
+#define	AT91_PIN_PB14	(PIN_BASE + 0x20 + 14)
+#define	AT91_PIN_PB15	(PIN_BASE + 0x20 + 15)
+#define	AT91_PIN_PB16	(PIN_BASE + 0x20 + 16)
+#define	AT91_PIN_PB17	(PIN_BASE + 0x20 + 17)
+#define	AT91_PIN_PB18	(PIN_BASE + 0x20 + 18)
+#define	AT91_PIN_PB19	(PIN_BASE + 0x20 + 19)
+#define	AT91_PIN_PB20	(PIN_BASE + 0x20 + 20)
+#define	AT91_PIN_PB21	(PIN_BASE + 0x20 + 21)
+#define	AT91_PIN_PB22	(PIN_BASE + 0x20 + 22)
+#define	AT91_PIN_PB23	(PIN_BASE + 0x20 + 23)
+#define	AT91_PIN_PB24	(PIN_BASE + 0x20 + 24)
+#define	AT91_PIN_PB25	(PIN_BASE + 0x20 + 25)
+#define	AT91_PIN_PB26	(PIN_BASE + 0x20 + 26)
+#define	AT91_PIN_PB27	(PIN_BASE + 0x20 + 27)
+#define	AT91_PIN_PB28	(PIN_BASE + 0x20 + 28)
+#define	AT91_PIN_PB29	(PIN_BASE + 0x20 + 29)
+#define	AT91_PIN_PB30	(PIN_BASE + 0x20 + 30)
+#define	AT91_PIN_PB31	(PIN_BASE + 0x20 + 31)
+
+#define	AT91_PIN_PC0	(PIN_BASE + 0x40 + 0)
+#define	AT91_PIN_PC1	(PIN_BASE + 0x40 + 1)
+#define	AT91_PIN_PC2	(PIN_BASE + 0x40 + 2)
+#define	AT91_PIN_PC3	(PIN_BASE + 0x40 + 3)
+#define	AT91_PIN_PC4	(PIN_BASE + 0x40 + 4)
+#define	AT91_PIN_PC5	(PIN_BASE + 0x40 + 5)
+#define	AT91_PIN_PC6	(PIN_BASE + 0x40 + 6)
+#define	AT91_PIN_PC7	(PIN_BASE + 0x40 + 7)
+#define	AT91_PIN_PC8	(PIN_BASE + 0x40 + 8)
+#define	AT91_PIN_PC9	(PIN_BASE + 0x40 + 9)
+#define	AT91_PIN_PC10	(PIN_BASE + 0x40 + 10)
+#define	AT91_PIN_PC11	(PIN_BASE + 0x40 + 11)
+#define	AT91_PIN_PC12	(PIN_BASE + 0x40 + 12)
+#define	AT91_PIN_PC13	(PIN_BASE + 0x40 + 13)
+#define	AT91_PIN_PC14	(PIN_BASE + 0x40 + 14)
+#define	AT91_PIN_PC15	(PIN_BASE + 0x40 + 15)
+#define	AT91_PIN_PC16	(PIN_BASE + 0x40 + 16)
+#define	AT91_PIN_PC17	(PIN_BASE + 0x40 + 17)
+#define	AT91_PIN_PC18	(PIN_BASE + 0x40 + 18)
+#define	AT91_PIN_PC19	(PIN_BASE + 0x40 + 19)
+#define	AT91_PIN_PC20	(PIN_BASE + 0x40 + 20)
+#define	AT91_PIN_PC21	(PIN_BASE + 0x40 + 21)
+#define	AT91_PIN_PC22	(PIN_BASE + 0x40 + 22)
+#define	AT91_PIN_PC23	(PIN_BASE + 0x40 + 23)
+#define	AT91_PIN_PC24	(PIN_BASE + 0x40 + 24)
+#define	AT91_PIN_PC25	(PIN_BASE + 0x40 + 25)
+#define	AT91_PIN_PC26	(PIN_BASE + 0x40 + 26)
+#define	AT91_PIN_PC27	(PIN_BASE + 0x40 + 27)
+#define	AT91_PIN_PC28	(PIN_BASE + 0x40 + 28)
+#define	AT91_PIN_PC29	(PIN_BASE + 0x40 + 29)
+#define	AT91_PIN_PC30	(PIN_BASE + 0x40 + 30)
+#define	AT91_PIN_PC31	(PIN_BASE + 0x40 + 31)
+
+#define	AT91_PIN_PD0	(PIN_BASE + 0x60 + 0)
+#define	AT91_PIN_PD1	(PIN_BASE + 0x60 + 1)
+#define	AT91_PIN_PD2	(PIN_BASE + 0x60 + 2)
+#define	AT91_PIN_PD3	(PIN_BASE + 0x60 + 3)
+#define	AT91_PIN_PD4	(PIN_BASE + 0x60 + 4)
+#define	AT91_PIN_PD5	(PIN_BASE + 0x60 + 5)
+#define	AT91_PIN_PD6	(PIN_BASE + 0x60 + 6)
+#define	AT91_PIN_PD7	(PIN_BASE + 0x60 + 7)
+#define	AT91_PIN_PD8	(PIN_BASE + 0x60 + 8)
+#define	AT91_PIN_PD9	(PIN_BASE + 0x60 + 9)
+#define	AT91_PIN_PD10	(PIN_BASE + 0x60 + 10)
+#define	AT91_PIN_PD11	(PIN_BASE + 0x60 + 11)
+#define	AT91_PIN_PD12	(PIN_BASE + 0x60 + 12)
+#define	AT91_PIN_PD13	(PIN_BASE + 0x60 + 13)
+#define	AT91_PIN_PD14	(PIN_BASE + 0x60 + 14)
+#define	AT91_PIN_PD15	(PIN_BASE + 0x60 + 15)
+#define	AT91_PIN_PD16	(PIN_BASE + 0x60 + 16)
+#define	AT91_PIN_PD17	(PIN_BASE + 0x60 + 17)
+#define	AT91_PIN_PD18	(PIN_BASE + 0x60 + 18)
+#define	AT91_PIN_PD19	(PIN_BASE + 0x60 + 19)
+#define	AT91_PIN_PD20	(PIN_BASE + 0x60 + 20)
+#define	AT91_PIN_PD21	(PIN_BASE + 0x60 + 21)
+#define	AT91_PIN_PD22	(PIN_BASE + 0x60 + 22)
+#define	AT91_PIN_PD23	(PIN_BASE + 0x60 + 23)
+#define	AT91_PIN_PD24	(PIN_BASE + 0x60 + 24)
+#define	AT91_PIN_PD25	(PIN_BASE + 0x60 + 25)
+#define	AT91_PIN_PD26	(PIN_BASE + 0x60 + 26)
+#define	AT91_PIN_PD27	(PIN_BASE + 0x60 + 27)
+#define	AT91_PIN_PD28	(PIN_BASE + 0x60 + 28)
+#define	AT91_PIN_PD29	(PIN_BASE + 0x60 + 29)
+#define	AT91_PIN_PD30	(PIN_BASE + 0x60 + 30)
+#define	AT91_PIN_PD31	(PIN_BASE + 0x60 + 31)
+
+#define	AT91_PIN_PE0	(PIN_BASE + 0x80 + 0)
+#define	AT91_PIN_PE1	(PIN_BASE + 0x80 + 1)
+#define	AT91_PIN_PE2	(PIN_BASE + 0x80 + 2)
+#define	AT91_PIN_PE3	(PIN_BASE + 0x80 + 3)
+#define	AT91_PIN_PE4	(PIN_BASE + 0x80 + 4)
+#define	AT91_PIN_PE5	(PIN_BASE + 0x80 + 5)
+#define	AT91_PIN_PE6	(PIN_BASE + 0x80 + 6)
+#define	AT91_PIN_PE7	(PIN_BASE + 0x80 + 7)
+#define	AT91_PIN_PE8	(PIN_BASE + 0x80 + 8)
+#define	AT91_PIN_PE9	(PIN_BASE + 0x80 + 9)
+#define	AT91_PIN_PE10	(PIN_BASE + 0x80 + 10)
+#define	AT91_PIN_PE11	(PIN_BASE + 0x80 + 11)
+#define	AT91_PIN_PE12	(PIN_BASE + 0x80 + 12)
+#define	AT91_PIN_PE13	(PIN_BASE + 0x80 + 13)
+#define	AT91_PIN_PE14	(PIN_BASE + 0x80 + 14)
+#define	AT91_PIN_PE15	(PIN_BASE + 0x80 + 15)
+#define	AT91_PIN_PE16	(PIN_BASE + 0x80 + 16)
+#define	AT91_PIN_PE17	(PIN_BASE + 0x80 + 17)
+#define	AT91_PIN_PE18	(PIN_BASE + 0x80 + 18)
+#define	AT91_PIN_PE19	(PIN_BASE + 0x80 + 19)
+#define	AT91_PIN_PE20	(PIN_BASE + 0x80 + 20)
+#define	AT91_PIN_PE21	(PIN_BASE + 0x80 + 21)
+#define	AT91_PIN_PE22	(PIN_BASE + 0x80 + 22)
+#define	AT91_PIN_PE23	(PIN_BASE + 0x80 + 23)
+#define	AT91_PIN_PE24	(PIN_BASE + 0x80 + 24)
+#define	AT91_PIN_PE25	(PIN_BASE + 0x80 + 25)
+#define	AT91_PIN_PE26	(PIN_BASE + 0x80 + 26)
+#define	AT91_PIN_PE27	(PIN_BASE + 0x80 + 27)
+#define	AT91_PIN_PE28	(PIN_BASE + 0x80 + 28)
+#define	AT91_PIN_PE29	(PIN_BASE + 0x80 + 29)
+#define	AT91_PIN_PE30	(PIN_BASE + 0x80 + 30)
+#define	AT91_PIN_PE31	(PIN_BASE + 0x80 + 31)
+
+#ifndef __ASSEMBLY__
+/* setup setup routines, called from board init or driver probe() */
+extern int __init_or_module at91_set_GPIO_periph(unsigned pin, int use_pullup);
+extern int __init_or_module at91_set_A_periph(unsigned pin, int use_pullup);
+extern int __init_or_module at91_set_B_periph(unsigned pin, int use_pullup);
+extern int __init_or_module at91_set_gpio_input(unsigned pin, int use_pullup);
+extern int __init_or_module at91_set_gpio_output(unsigned pin, int value);
+extern int __init_or_module at91_set_deglitch(unsigned pin, int is_on);
+extern int __init_or_module at91_set_multi_drive(unsigned pin, int is_on);
+
+/* callable at any time */
+extern int at91_set_gpio_value(unsigned pin, int value);
+extern int at91_get_gpio_value(unsigned pin);
+
+/* callable only from core power-management code */
+extern void at91_gpio_suspend(void);
+extern void at91_gpio_resume(void);
+
+/*-------------------------------------------------------------------------*/
+
+/* wrappers for "new style" GPIO calls. the old AT91-specfic ones should
+ * eventually be removed (along with this errno.h inclusion), and the
+ * gpio request/free calls should probably be implemented.
+ */
+
+#include <asm/errno.h>
+
+static inline int gpio_request(unsigned gpio, const char *label)
+{
+	return 0;
+}
+
+static inline void gpio_free(unsigned gpio)
+{
+}
+
+extern int gpio_direction_input(unsigned gpio);
+extern int gpio_direction_output(unsigned gpio, int value);
+
+static inline int gpio_get_value(unsigned gpio)
+{
+	return at91_get_gpio_value(gpio);
+}
+
+static inline void gpio_set_value(unsigned gpio, int value)
+{
+	at91_set_gpio_value(gpio, value);
+}
+
+#include <asm-generic/gpio.h>		/* cansleep wrappers */
+
+static inline int gpio_to_irq(unsigned gpio)
+{
+	return gpio;
+}
+
+static inline int irq_to_gpio(unsigned irq)
+{
+	return irq;
+}
+
+#endif	/* __ASSEMBLY__ */
+
+#endif
diff --git a/arch/arm/mach-at91/include/mach/hardware.h b/arch/arm/mach-at91/include/mach/hardware.h
new file mode 100644
index 000000000000..da0b681c652c
--- /dev/null
+++ b/arch/arm/mach-at91/include/mach/hardware.h
@@ -0,0 +1,92 @@
+/*
+ * arch/arm/mach-at91/include/mach/hardware.h
+ *
+ *  Copyright (C) 2003 SAN People
+ *  Copyright (C) 2003 ATMEL
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ */
+
+#ifndef __ASM_ARCH_HARDWARE_H
+#define __ASM_ARCH_HARDWARE_H
+
+#include <asm/sizes.h>
+
+#if defined(CONFIG_ARCH_AT91RM9200)
+#include <mach/at91rm9200.h>
+#elif defined(CONFIG_ARCH_AT91SAM9260) || defined(CONFIG_ARCH_AT91SAM9G20)
+#include <mach/at91sam9260.h>
+#elif defined(CONFIG_ARCH_AT91SAM9261)
+#include <mach/at91sam9261.h>
+#elif defined(CONFIG_ARCH_AT91SAM9263)
+#include <mach/at91sam9263.h>
+#elif defined(CONFIG_ARCH_AT91SAM9RL)
+#include <mach/at91sam9rl.h>
+#elif defined(CONFIG_ARCH_AT91CAP9)
+#include <mach/at91cap9.h>
+#elif defined(CONFIG_ARCH_AT91X40)
+#include <mach/at91x40.h>
+#else
+#error "Unsupported AT91 processor"
+#endif
+
+
+#ifdef CONFIG_MMU
+/*
+ * Remap the peripherals from address 0xFFF78000 .. 0xFFFFFFFF
+ * to 0xFEF78000 .. 0xFF000000.  (544Kb)
+ */
+#define AT91_IO_PHYS_BASE	0xFFF78000
+#define AT91_IO_VIRT_BASE	(0xFF000000 - AT91_IO_SIZE)
+#else
+/*
+ * Identity mapping for the non MMU case.
+ */
+#define AT91_IO_PHYS_BASE	AT91_BASE_SYS
+#define AT91_IO_VIRT_BASE	AT91_IO_PHYS_BASE
+#endif
+
+#define AT91_IO_SIZE		(0xFFFFFFFF - AT91_IO_PHYS_BASE + 1)
+
+ /* Convert a physical IO address to virtual IO address */
+#define AT91_IO_P2V(x)		((x) - AT91_IO_PHYS_BASE + AT91_IO_VIRT_BASE)
+
+/*
+ * Virtual to Physical Address mapping for IO devices.
+ */
+#define AT91_VA_BASE_SYS	AT91_IO_P2V(AT91_BASE_SYS)
+#define AT91_VA_BASE_EMAC	AT91_IO_P2V(AT91RM9200_BASE_EMAC)
+
+ /* Internal SRAM is mapped below the IO devices */
+#define AT91_SRAM_MAX		SZ_1M
+#define AT91_VIRT_BASE		(AT91_IO_VIRT_BASE - AT91_SRAM_MAX)
+
+/* Serial ports */
+#define ATMEL_MAX_UART		7		/* 6 USART3's and one DBGU port (SAM9260) */
+
+/* External Memory Map */
+#define AT91_CHIPSELECT_0	0x10000000
+#define AT91_CHIPSELECT_1	0x20000000
+#define AT91_CHIPSELECT_2	0x30000000
+#define AT91_CHIPSELECT_3	0x40000000
+#define AT91_CHIPSELECT_4	0x50000000
+#define AT91_CHIPSELECT_5	0x60000000
+#define AT91_CHIPSELECT_6	0x70000000
+#define AT91_CHIPSELECT_7	0x80000000
+
+/* SDRAM */
+#ifdef CONFIG_DRAM_BASE
+#define AT91_SDRAM_BASE		CONFIG_DRAM_BASE
+#else
+#define AT91_SDRAM_BASE		AT91_CHIPSELECT_1
+#endif
+
+/* Clocks */
+#define AT91_SLOW_CLOCK		32768		/* slow clock */
+
+
+#endif
diff --git a/arch/arm/mach-at91/include/mach/io.h b/arch/arm/mach-at91/include/mach/io.h
new file mode 100644
index 000000000000..1611bd03f528
--- /dev/null
+++ b/arch/arm/mach-at91/include/mach/io.h
@@ -0,0 +1,48 @@
+/*
+ * arch/arm/mach-at91/include/mach/io.h
+ *
+ *  Copyright (C) 2003 SAN People
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#ifndef __ASM_ARCH_IO_H
+#define __ASM_ARCH_IO_H
+
+#define IO_SPACE_LIMIT		0xFFFFFFFF
+
+#define __io(a)			((void __iomem *)(a))
+#define __mem_pci(a)		(a)
+
+
+#ifndef __ASSEMBLY__
+
+static inline unsigned int at91_sys_read(unsigned int reg_offset)
+{
+	void __iomem *addr = (void __iomem *)AT91_VA_BASE_SYS;
+
+	return __raw_readl(addr + reg_offset);
+}
+
+static inline void at91_sys_write(unsigned int reg_offset, unsigned long value)
+{
+	void __iomem *addr = (void __iomem *)AT91_VA_BASE_SYS;
+
+	__raw_writel(value, addr + reg_offset);
+}
+
+#endif
+
+#endif
diff --git a/arch/arm/mach-at91/include/mach/irqs.h b/arch/arm/mach-at91/include/mach/irqs.h
new file mode 100644
index 000000000000..bda29ccbcd94
--- /dev/null
+++ b/arch/arm/mach-at91/include/mach/irqs.h
@@ -0,0 +1,48 @@
+/*
+ * arch/arm/mach-at91/include/mach/irqs.h
+ *
+ *  Copyright (C) 2004 SAN People
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#ifndef __ASM_ARCH_IRQS_H
+#define __ASM_ARCH_IRQS_H
+
+#include <asm/io.h>
+#include <mach/at91_aic.h>
+
+#define NR_AIC_IRQS 32
+
+
+/*
+ * Acknowledge interrupt with AIC after interrupt has been handled.
+ *   (by kernel/irq.c)
+ */
+#define irq_finish(irq) do { at91_sys_write(AT91_AIC_EOICR, 0); } while (0)
+
+
+/*
+ * IRQ interrupt symbols are the AT91xxx_ID_* symbols
+ * for IRQs handled directly through the AIC, or else the AT91_PIN_*
+ * symbols in gpio.h for ones handled indirectly as GPIOs.
+ * We make provision for 5 banks of GPIO.
+ */
+#define	NR_IRQS		(NR_AIC_IRQS + (5 * 32))
+
+/* FIQ is AIC source 0. */
+#define FIQ_START AT91_ID_FIQ
+
+#endif
diff --git a/arch/arm/mach-at91/include/mach/memory.h b/arch/arm/mach-at91/include/mach/memory.h
new file mode 100644
index 000000000000..9dd1b8c79b08
--- /dev/null
+++ b/arch/arm/mach-at91/include/mach/memory.h
@@ -0,0 +1,39 @@
+/*
+ * arch/arm/mach-at91/include/mach/memory.h
+ *
+ *  Copyright (C) 2004 SAN People
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#ifndef __ASM_ARCH_MEMORY_H
+#define __ASM_ARCH_MEMORY_H
+
+#include <mach/hardware.h>
+
+#define PHYS_OFFSET	(AT91_SDRAM_BASE)
+
+
+/*
+ * Virtual view <-> DMA view memory address translations
+ * virt_to_bus: Used to translate the virtual address to an
+ *              address suitable to be passed to set_dma_addr
+ * bus_to_virt: Used to convert an address for DMA operations
+ *              to an address that the kernel can use.
+ */
+#define __virt_to_bus(x) __virt_to_phys(x)
+#define __bus_to_virt(x) __phys_to_virt(x)
+
+#endif
diff --git a/arch/arm/mach-at91/include/mach/system.h b/arch/arm/mach-at91/include/mach/system.h
new file mode 100644
index 000000000000..e712658d966c
--- /dev/null
+++ b/arch/arm/mach-at91/include/mach/system.h
@@ -0,0 +1,53 @@
+/*
+ * arch/arm/mach-at91/include/mach/system.h
+ *
+ *  Copyright (C) 2003 SAN People
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#ifndef __ASM_ARCH_SYSTEM_H
+#define __ASM_ARCH_SYSTEM_H
+
+#include <mach/hardware.h>
+#include <mach/at91_st.h>
+#include <mach/at91_dbgu.h>
+
+static inline void arch_idle(void)
+{
+	/*
+	 * Disable the processor clock.  The processor will be automatically
+	 * re-enabled by an interrupt or by a reset.
+	 */
+//	at91_sys_write(AT91_PMC_SCDR, AT91_PMC_PCK);
+
+	/*
+	 * Set the processor (CP15) into 'Wait for Interrupt' mode.
+	 * Unlike disabling the processor clock via the PMC (above)
+	 *  this allows the processor to be woken via JTAG.
+	 */
+	cpu_do_idle();
+}
+
+void (*at91_arch_reset)(void);
+
+static inline void arch_reset(char mode)
+{
+	/* call the CPU-specific reset function */
+	if (at91_arch_reset)
+		(at91_arch_reset)();
+}
+
+#endif
diff --git a/arch/arm/mach-at91/include/mach/timex.h b/arch/arm/mach-at91/include/mach/timex.h
new file mode 100644
index 000000000000..d84c9948becf
--- /dev/null
+++ b/arch/arm/mach-at91/include/mach/timex.h
@@ -0,0 +1,77 @@
+/*
+ * arch/arm/mach-at91/include/mach/timex.h
+ *
+ *  Copyright (C) 2003 SAN People
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#ifndef __ASM_ARCH_TIMEX_H
+#define __ASM_ARCH_TIMEX_H
+
+#include <mach/hardware.h>
+
+#if defined(CONFIG_ARCH_AT91RM9200)
+
+#define CLOCK_TICK_RATE		(AT91_SLOW_CLOCK)
+
+#elif defined(CONFIG_ARCH_AT91SAM9260)
+
+#if defined(CONFIG_MACH_USB_A9260) || defined(CONFIG_MACH_QIL_A9260)
+#define AT91SAM9_MASTER_CLOCK	90000000
+#else
+#define AT91SAM9_MASTER_CLOCK	99300000
+#endif
+
+#define CLOCK_TICK_RATE		(AT91SAM9_MASTER_CLOCK/16)
+
+#elif defined(CONFIG_ARCH_AT91SAM9261)
+
+#define AT91SAM9_MASTER_CLOCK	99300000
+#define CLOCK_TICK_RATE		(AT91SAM9_MASTER_CLOCK/16)
+
+#elif defined(CONFIG_ARCH_AT91SAM9263)
+
+#if defined(CONFIG_MACH_USB_A9263)
+#define AT91SAM9_MASTER_CLOCK	90000000
+#else
+#define AT91SAM9_MASTER_CLOCK	99959500
+#endif
+
+#define CLOCK_TICK_RATE		(AT91SAM9_MASTER_CLOCK/16)
+
+#elif defined(CONFIG_ARCH_AT91SAM9RL)
+
+#define AT91SAM9_MASTER_CLOCK	100000000
+#define CLOCK_TICK_RATE		(AT91SAM9_MASTER_CLOCK/16)
+
+#elif defined(CONFIG_ARCH_AT91SAM9G20)
+
+#define AT91SAM9_MASTER_CLOCK	132096000
+#define CLOCK_TICK_RATE		(AT91SAM9_MASTER_CLOCK/16)
+
+#elif defined(CONFIG_ARCH_AT91CAP9)
+
+#define AT91CAP9_MASTER_CLOCK	100000000
+#define CLOCK_TICK_RATE		(AT91CAP9_MASTER_CLOCK/16)
+
+#elif defined(CONFIG_ARCH_AT91X40)
+
+#define AT91X40_MASTER_CLOCK	40000000
+#define CLOCK_TICK_RATE		(AT91X40_MASTER_CLOCK)
+
+#endif
+
+#endif
diff --git a/arch/arm/mach-at91/include/mach/uncompress.h b/arch/arm/mach-at91/include/mach/uncompress.h
new file mode 100644
index 000000000000..0410d548e9b1
--- /dev/null
+++ b/arch/arm/mach-at91/include/mach/uncompress.h
@@ -0,0 +1,76 @@
+/*
+ * arch/arm/mach-at91/include/mach/uncompress.h
+ *
+ *  Copyright (C) 2003 SAN People
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#ifndef __ASM_ARCH_UNCOMPRESS_H
+#define __ASM_ARCH_UNCOMPRESS_H
+
+#include <asm/io.h>
+#include <linux/atmel_serial.h>
+
+#if defined(CONFIG_AT91_EARLY_DBGU)
+#define UART_OFFSET (AT91_DBGU + AT91_BASE_SYS)
+#elif defined(CONFIG_AT91_EARLY_USART0)
+#define UART_OFFSET AT91_USART0
+#elif defined(CONFIG_AT91_EARLY_USART1)
+#define UART_OFFSET AT91_USART1
+#elif defined(CONFIG_AT91_EARLY_USART2)
+#define UART_OFFSET AT91_USART2
+#elif defined(CONFIG_AT91_EARLY_USART3)
+#define UART_OFFSET AT91_USART3
+#elif defined(CONFIG_AT91_EARLY_USART4)
+#define UART_OFFSET AT91_USART4
+#elif defined(CONFIG_AT91_EARLY_USART5)
+#define UART_OFFSET AT91_USART5
+#endif
+
+/*
+ * The following code assumes the serial port has already been
+ * initialized by the bootloader.  If you didn't setup a port in
+ * your bootloader then nothing will appear (which might be desired).
+ *
+ * This does not append a newline
+ */
+static void putc(int c)
+{
+#ifdef UART_OFFSET
+	void __iomem *sys = (void __iomem *) UART_OFFSET;	/* physical address */
+
+	while (!(__raw_readl(sys + ATMEL_US_CSR) & ATMEL_US_TXRDY))
+		barrier();
+	__raw_writel(c, sys + ATMEL_US_THR);
+#endif
+}
+
+static inline void flush(void)
+{
+#ifdef UART_OFFSET
+	void __iomem *sys = (void __iomem *) UART_OFFSET;	/* physical address */
+
+	/* wait for transmission to complete */
+	while (!(__raw_readl(sys + ATMEL_US_CSR) & ATMEL_US_TXEMPTY))
+		barrier();
+#endif
+}
+
+#define arch_decomp_setup()
+
+#define arch_decomp_wdog()
+
+#endif
diff --git a/arch/arm/mach-at91/include/mach/vmalloc.h b/arch/arm/mach-at91/include/mach/vmalloc.h
new file mode 100644
index 000000000000..8eb459f3f5b7
--- /dev/null
+++ b/arch/arm/mach-at91/include/mach/vmalloc.h
@@ -0,0 +1,26 @@
+/*
+ * arch/arm/mach-at91/include/mach/vmalloc.h
+ *
+ *  Copyright (C) 2003 SAN People
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#ifndef __ASM_ARCH_VMALLOC_H
+#define __ASM_ARCH_VMALLOC_H
+
+#define VMALLOC_END		(AT91_VIRT_BASE & PGDIR_MASK)
+
+#endif
diff --git a/arch/arm/mach-at91/irq.c b/arch/arm/mach-at91/irq.c
index 78a5cdb746dc..da3494a53423 100644
--- a/arch/arm/mach-at91/irq.c
+++ b/arch/arm/mach-at91/irq.c
@@ -25,9 +25,8 @@
 #include <linux/mm.h>
 #include <linux/types.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/irq.h>
-#include <asm/mach-types.h>
 #include <asm/setup.h>
 
 #include <asm/mach/arch.h>
@@ -56,19 +55,19 @@ static int at91_aic_set_type(unsigned irq, unsigned type)
 	unsigned int smr, srctype;
 
 	switch (type) {
-	case IRQT_HIGH:
+	case IRQ_TYPE_LEVEL_HIGH:
 		srctype = AT91_AIC_SRCTYPE_HIGH;
 		break;
-	case IRQT_RISING:
+	case IRQ_TYPE_EDGE_RISING:
 		srctype = AT91_AIC_SRCTYPE_RISING;
 		break;
-	case IRQT_LOW:
+	case IRQ_TYPE_LEVEL_LOW:
 		if ((irq == AT91_ID_FIQ) || is_extern_irq(irq))		/* only supported on external interrupts */
 			srctype = AT91_AIC_SRCTYPE_LOW;
 		else
 			return -EINVAL;
 		break;
-	case IRQT_FALLING:
+	case IRQ_TYPE_EDGE_FALLING:
 		if ((irq == AT91_ID_FIQ) || is_extern_irq(irq))		/* only supported on external interrupts */
 			srctype = AT91_AIC_SRCTYPE_FALLING;
 		else
diff --git a/arch/arm/mach-at91/leds.c b/arch/arm/mach-at91/leds.c
index 9cdcda500fe8..fec03c59ff94 100644
--- a/arch/arm/mach-at91/leds.c
+++ b/arch/arm/mach-at91/leds.c
@@ -13,9 +13,8 @@
 #include <linux/module.h>
 #include <linux/init.h>
 
-#include <asm/mach-types.h>
-#include <asm/arch/board.h>
-#include <asm/arch/gpio.h>
+#include <mach/board.h>
+#include <mach/gpio.h>
 
 
 /* ------------------------------------------------------------------------- */
diff --git a/arch/arm/mach-at91/pm.c b/arch/arm/mach-at91/pm.c
index 8ab4feb1ec5b..ec2fe4ca1e27 100644
--- a/arch/arm/mach-at91/pm.c
+++ b/arch/arm/mach-at91/pm.c
@@ -23,16 +23,15 @@
 #include <asm/atomic.h>
 #include <asm/mach/time.h>
 #include <asm/mach/irq.h>
-#include <asm/mach-types.h>
 
-#include <asm/arch/at91_pmc.h>
-#include <asm/arch/gpio.h>
-#include <asm/arch/cpu.h>
+#include <mach/at91_pmc.h>
+#include <mach/gpio.h>
+#include <mach/cpu.h>
 
 #include "generic.h"
 
 #ifdef CONFIG_ARCH_AT91RM9200
-#include <asm/arch/at91rm9200_mc.h>
+#include <mach/at91rm9200_mc.h>
 
 /*
  * The AT91RM9200 goes into self-refresh mode with this command, and will
@@ -42,7 +41,7 @@
 #define sdram_selfrefresh_disable()	do {} while (0)
 
 #elif defined(CONFIG_ARCH_AT91CAP9)
-#include <asm/arch/at91cap9_ddrsdr.h>
+#include <mach/at91cap9_ddrsdr.h>
 
 static u32 saved_lpr;
 
@@ -59,7 +58,7 @@ static inline void sdram_selfrefresh_enable(void)
 #define sdram_selfrefresh_disable()	at91_sys_write(AT91_DDRSDRC_LPR, saved_lpr)
 
 #else
-#include <asm/arch/at91sam9_sdramc.h>
+#include <mach/at91sam9_sdramc.h>
 
 #ifdef CONFIG_ARCH_AT91SAM9263
 /*
@@ -92,8 +91,8 @@ static inline void sdram_selfrefresh_enable(void)
  */
 #if defined(AT91_SHDWC)
 
-#include <asm/arch/at91_rstc.h>
-#include <asm/arch/at91_shdwc.h>
+#include <mach/at91_rstc.h>
+#include <mach/at91_shdwc.h>
 
 static void __init show_reset_status(void)
 {
diff --git a/arch/arm/mach-clps711x/autcpu12.c b/arch/arm/mach-clps711x/autcpu12.c
index c13ca6c56baa..474616dcd7a6 100644
--- a/arch/arm/mach-clps711x/autcpu12.c
+++ b/arch/arm/mach-clps711x/autcpu12.c
@@ -23,7 +23,7 @@
 #include <linux/string.h>
 #include <linux/mm.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/sizes.h>
 #include <asm/io.h>
 #include <asm/setup.h>
@@ -33,7 +33,7 @@
 #include <asm/page.h>
 
 #include <asm/mach/map.h>
-#include <asm/arch/autcpu12.h>
+#include <mach/autcpu12.h>
 
 #include "common.h"
 
diff --git a/arch/arm/mach-clps711x/cdb89712.c b/arch/arm/mach-clps711x/cdb89712.c
index 831df007f6c7..aa02aa5a01f4 100644
--- a/arch/arm/mach-clps711x/cdb89712.c
+++ b/arch/arm/mach-clps711x/cdb89712.c
@@ -23,7 +23,7 @@
 #include <linux/string.h>
 #include <linux/mm.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 #include <asm/pgtable.h>
 #include <asm/page.h>
diff --git a/arch/arm/mach-clps711x/ceiva.c b/arch/arm/mach-clps711x/ceiva.c
index e2b2c5ac8a83..8ada20184978 100644
--- a/arch/arm/mach-clps711x/ceiva.c
+++ b/arch/arm/mach-clps711x/ceiva.c
@@ -27,7 +27,7 @@
 
 #include <linux/kernel.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/page.h>
 #include <asm/pgtable.h>
 #include <asm/sizes.h>
diff --git a/arch/arm/mach-clps711x/edb7211-mm.c b/arch/arm/mach-clps711x/edb7211-mm.c
index 0d52e0851251..c58e32ec4c5d 100644
--- a/arch/arm/mach-clps711x/edb7211-mm.c
+++ b/arch/arm/mach-clps711x/edb7211-mm.c
@@ -22,7 +22,7 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/page.h>
 #include <asm/pgtable.h>
 #include <asm/sizes.h>
diff --git a/arch/arm/mach-clps711x/fortunet.c b/arch/arm/mach-clps711x/fortunet.c
index 3792ab4f0996..7122b3d21043 100644
--- a/arch/arm/mach-clps711x/fortunet.c
+++ b/arch/arm/mach-clps711x/fortunet.c
@@ -23,7 +23,7 @@
 #include <linux/init.h>
 #include <linux/initrd.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/irq.h>
 #include <asm/setup.h>
 #include <asm/mach-types.h>
diff --git a/include/asm-arm/arch-clps711x/autcpu12.h b/arch/arm/mach-clps711x/include/mach/autcpu12.h
index 1588a365f610..1588a365f610 100644
--- a/include/asm-arm/arch-clps711x/autcpu12.h
+++ b/arch/arm/mach-clps711x/include/mach/autcpu12.h
diff --git a/arch/arm/mach-clps711x/include/mach/debug-macro.S b/arch/arm/mach-clps711x/include/mach/debug-macro.S
new file mode 100644
index 000000000000..64baf9f87408
--- /dev/null
+++ b/arch/arm/mach-clps711x/include/mach/debug-macro.S
@@ -0,0 +1,46 @@
+/* arch/arm/mach-clps711x/include/mach/debug-macro.S
+ *
+ * Debugging macro include header
+ *
+ *  Copyright (C) 1994-1999 Russell King
+ *  Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+*/
+
+#include <asm/hardware/clps7111.h>
+
+		.macro	addruart,rx
+		mrc	p15, 0, \rx, c1, c0
+		tst	\rx, #1			@ MMU enabled?
+		moveq	\rx, #CLPS7111_PHYS_BASE
+		movne	\rx, #CLPS7111_VIRT_BASE
+#ifndef CONFIG_DEBUG_CLPS711X_UART2
+		add	\rx, \rx, #0x0000	@ UART1
+#else
+		add	\rx, \rx, #0x1000	@ UART2
+#endif
+		.endm
+
+		.macro	senduart,rd,rx
+		str	\rd, [\rx, #0x0480]	@ UARTDR
+		.endm
+
+		.macro	waituart,rd,rx
+1001:		ldr	\rd, [\rx, #0x0140]	@ SYSFLGx
+		tst	\rd, #1 << 11		@ UBUSYx
+		bne	1001b
+		.endm
+
+		.macro	busyuart,rd,rx
+		tst	\rx, #0x1000		@ UART2 does not have CTS here
+		bne	1002f
+1001:		ldr	\rd, [\rx, #0x0140]	@ SYSFLGx
+		tst	\rd, #1 << 8		@ CTS
+		bne	1001b
+1002:
+		.endm
+
diff --git a/arch/arm/mach-clps711x/include/mach/dma.h b/arch/arm/mach-clps711x/include/mach/dma.h
new file mode 100644
index 000000000000..0d620e869536
--- /dev/null
+++ b/arch/arm/mach-clps711x/include/mach/dma.h
@@ -0,0 +1,19 @@
+/*
+ *  arch/arm/mach-clps711x/include/mach/dma.h
+ *
+ *  Copyright (C) 1997,1998 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
diff --git a/arch/arm/mach-clps711x/include/mach/entry-macro.S b/arch/arm/mach-clps711x/include/mach/entry-macro.S
new file mode 100644
index 000000000000..90fa2f70489f
--- /dev/null
+++ b/arch/arm/mach-clps711x/include/mach/entry-macro.S
@@ -0,0 +1,58 @@
+/*
+ * arch/arm/mach-clps711x/include/mach/entry-macro.S
+ *
+ * Low-level IRQ helper macros for CLPS711X-based platforms
+ *
+ * This file is licensed under  the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+#include <mach/hardware.h>
+#include <asm/hardware/clps7111.h>
+
+		.macro	disable_fiq
+		.endm
+
+		.macro	get_irqnr_preamble, base, tmp
+		.endm
+
+		.macro	arch_ret_to_user, tmp1, tmp2
+		.endm
+
+#if (INTSR2 - INTSR1) != (INTMR2 - INTMR1)
+#error INTSR stride != INTMR stride
+#endif
+
+		.macro	get_irqnr_and_base, irqnr, stat, base, mask
+		mov	\base, #CLPS7111_BASE
+		ldr	\stat, [\base, #INTSR1]
+		ldr	\mask, [\base, #INTMR1]
+		mov	\irqnr, #4
+		mov	\mask, \mask, lsl #16
+		and	\stat, \stat, \mask, lsr #16
+		movs	\stat, \stat, lsr #4
+		bne	1001f
+
+		add	\base, \base, #INTSR2 - INTSR1
+		ldr	\stat, [\base, #INTSR1]
+		ldr	\mask, [\base, #INTMR1]
+		mov	\irqnr, #16
+		mov	\mask, \mask, lsl #16
+		and	\stat, \stat, \mask, lsr #16
+
+1001:		tst	\stat, #255
+		addeq	\irqnr, \irqnr, #8
+		moveq	\stat, \stat, lsr #8
+		tst	\stat, #15
+		addeq	\irqnr, \irqnr, #4
+		moveq	\stat, \stat, lsr #4
+		tst	\stat, #3
+		addeq	\irqnr, \irqnr, #2
+		moveq	\stat, \stat, lsr #2
+		tst	\stat, #1
+		addeq	\irqnr, \irqnr, #1
+		moveq	\stat, \stat, lsr #1
+		tst	\stat, #1			@ bit 0 should be set
+		.endm
+
+
diff --git a/arch/arm/mach-clps711x/include/mach/hardware.h b/arch/arm/mach-clps711x/include/mach/hardware.h
new file mode 100644
index 000000000000..4c3e101b96c9
--- /dev/null
+++ b/arch/arm/mach-clps711x/include/mach/hardware.h
@@ -0,0 +1,237 @@
+/*
+ *  arch/arm/mach-clps711x/include/mach/hardware.h
+ *
+ *  This file contains the hardware definitions of the Prospector P720T.
+ *
+ *  Copyright (C) 2000 Deep Blue Solutions Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#ifndef __ASM_ARCH_HARDWARE_H
+#define __ASM_ARCH_HARDWARE_H
+
+
+#define CLPS7111_VIRT_BASE	0xff000000
+#define CLPS7111_BASE		CLPS7111_VIRT_BASE
+
+/*
+ * The physical addresses that the external chip select signals map to is
+ * dependent on the setting of the nMEDCHG signal on EP7211 and EP7212
+ * processors.  CONFIG_EP72XX_BOOT_ROM is only available if these
+ * processors are in use.
+ */
+#ifndef CONFIG_EP72XX_ROM_BOOT
+#define CS0_PHYS_BASE		(0x00000000)
+#define CS1_PHYS_BASE		(0x10000000)
+#define CS2_PHYS_BASE		(0x20000000)
+#define CS3_PHYS_BASE		(0x30000000)
+#define CS4_PHYS_BASE		(0x40000000)
+#define CS5_PHYS_BASE		(0x50000000)
+#define CS6_PHYS_BASE		(0x60000000)
+#define CS7_PHYS_BASE		(0x70000000)
+#else
+#define CS0_PHYS_BASE		(0x70000000)
+#define CS1_PHYS_BASE		(0x60000000)
+#define CS2_PHYS_BASE		(0x50000000)
+#define CS3_PHYS_BASE		(0x40000000)
+#define CS4_PHYS_BASE		(0x30000000)
+#define CS5_PHYS_BASE		(0x20000000)
+#define CS6_PHYS_BASE		(0x10000000)
+#define CS7_PHYS_BASE		(0x00000000)
+#endif
+
+#if defined (CONFIG_ARCH_EP7211)
+
+#define EP7211_VIRT_BASE	CLPS7111_VIRT_BASE
+#define EP7211_BASE		CLPS7111_VIRT_BASE
+#include <asm/hardware/ep7211.h>
+
+#elif defined (CONFIG_ARCH_EP7212)
+
+#define EP7212_VIRT_BASE	CLPS7111_VIRT_BASE
+#define EP7212_BASE		CLPS7111_VIRT_BASE
+#include <asm/hardware/ep7212.h>
+
+#endif
+
+#define SYSPLD_VIRT_BASE	0xfe000000
+#define SYSPLD_BASE		SYSPLD_VIRT_BASE
+
+#ifndef __ASSEMBLER__
+
+#define PCIO_BASE		IO_BASE
+
+#endif
+
+
+#if  defined (CONFIG_ARCH_AUTCPU12)
+
+#define  CS89712_VIRT_BASE	CLPS7111_VIRT_BASE
+#define  CS89712_BASE		CLPS7111_VIRT_BASE
+
+#include <asm/hardware/clps7111.h>
+#include <asm/hardware/ep7212.h>
+#include <asm/hardware/cs89712.h>
+
+#endif
+
+
+#if defined (CONFIG_ARCH_CDB89712)
+
+#include <asm/hardware/clps7111.h>
+#include <asm/hardware/ep7212.h>
+#include <asm/hardware/cs89712.h>
+
+/* dynamic ioremap() areas */
+#define FLASH_START      0x00000000
+#define FLASH_SIZE       0x800000
+#define FLASH_WIDTH      4
+
+#define SRAM_START       0x60000000
+#define SRAM_SIZE        0xc000
+#define SRAM_WIDTH       4
+
+#define BOOTROM_START    0x70000000
+#define BOOTROM_SIZE     0x80
+#define BOOTROM_WIDTH    4
+
+
+/* static cdb89712_map_io() areas */
+#define REGISTER_START   0x80000000
+#define REGISTER_SIZE    0x4000
+#define REGISTER_BASE    0xff000000
+
+#define ETHER_START      0x20000000
+#define ETHER_SIZE       0x1000
+#define ETHER_BASE       0xfe000000
+
+#endif
+
+
+#if defined (CONFIG_ARCH_EDB7211)
+
+/*
+ * The extra 8 lines of the keyboard matrix are wired to chip select 3 (nCS3) 
+ * and repeat across it. This is the mapping for it.
+ *
+ * In jumpered boot mode, nCS3 is mapped to 0x4000000, not 0x3000000. This 
+ * was cause for much consternation and headscratching. This should probably
+ * be made a compile/run time kernel option.
+ */
+#define EP7211_PHYS_EXTKBD		CS3_PHYS_BASE	/* physical */
+
+#define EP7211_VIRT_EXTKBD		(0xfd000000)	/* virtual */
+
+
+/*
+ * The CS8900A ethernet chip has its I/O registers wired to chip select 2 
+ * (nCS2). This is the mapping for it.
+ *
+ * In jumpered boot mode, nCS2 is mapped to 0x5000000, not 0x2000000. This 
+ * was cause for much consternation and headscratching. This should probably
+ * be made a compile/run time kernel option.
+ */
+#define EP7211_PHYS_CS8900A		CS2_PHYS_BASE	/* physical */
+
+#define EP7211_VIRT_CS8900A		(0xfc000000)	/* virtual */
+
+
+/*
+ * The two flash banks are wired to chip selects 0 and 1. This is the mapping
+ * for them.
+ *
+ * nCS0 and nCS1 are at 0x70000000 and 0x60000000, respectively, when running
+ * in jumpered boot mode.
+ */
+#define EP7211_PHYS_FLASH1		CS0_PHYS_BASE	/* physical */
+#define EP7211_PHYS_FLASH2		CS1_PHYS_BASE	/* physical */
+
+#define EP7211_VIRT_FLASH1		(0xfa000000)	/* virtual */
+#define EP7211_VIRT_FLASH2		(0xfb000000)	/* virtual */
+
+#endif /* CONFIG_ARCH_EDB7211 */
+
+
+/*
+ * Relevant bits in port D, which controls power to the various parts of
+ * the LCD on the EDB7211.
+ */
+#define EDB_PD1_LCD_DC_DC_EN	(1<<1)
+#define EDB_PD2_LCDEN		(1<<2)
+#define EDB_PD3_LCDBL		(1<<3)
+
+
+#if defined (CONFIG_ARCH_CEIVA)
+
+#define  CEIVA_VIRT_BASE	CLPS7111_VIRT_BASE
+#define  CEIVA_BASE		CLPS7111_VIRT_BASE
+
+#include <asm/hardware/clps7111.h>
+#include <asm/hardware/ep7212.h>
+
+
+/*
+ * The two flash banks are wired to chip selects 0 and 1. This is the mapping
+ * for them.
+ *
+ * nCS0 and nCS1 are at 0x70000000 and 0x60000000, respectively, when running
+ * in jumpered boot mode.
+ */
+#define CEIVA_PHYS_FLASH1	CS0_PHYS_BASE	/* physical */
+#define CEIVA_PHYS_FLASH2	CS1_PHYS_BASE	/* physical */
+
+#define CEIVA_VIRT_FLASH1	(0xfa000000)	/* virtual */
+#define CEIVA_VIRT_FLASH2	(0xfb000000)	/* virtual */
+
+#define CEIVA_FLASH_SIZE        0x100000
+#define CEIVA_FLASH_WIDTH       2
+
+#define SRAM_START       0x60000000
+#define SRAM_SIZE        0xc000
+#define SRAM_WIDTH       4
+
+#define BOOTROM_START    0x70000000
+#define BOOTROM_SIZE     0x80
+#define BOOTROM_WIDTH    4
+
+/*
+ * SED1355 LCD controller
+ */
+#define CEIVA_PHYS_SED1355	CS2_PHYS_BASE
+#define CEIVA_VIRT_SED1355	(0xfc000000)
+
+/*
+ * Relevant bits in port D, which controls power to the various parts of
+ * the LCD on the Ceiva Photo Max, and reset to the LCD controller.
+ */
+
+// Reset line to SED1355 (must be high to operate)
+#define CEIVA_PD1_LCDRST	(1<<1)
+// LCD panel enable (set to one, to enable LCD)
+#define CEIVA_PD4_LCDEN		(1<<4)
+// Backlight (set to one, to turn on backlight
+#define CEIVA_PD5_LCDBL		(1<<5)
+
+/*
+ * Relevant bits in port B, which report the status of the buttons.
+ */
+
+// White button
+#define CEIVA_PB4_WHT_BTN	(1<<4)
+// Black button
+#define CEIVA_PB0_BLK_BTN	(1<<0)
+#endif // #if defined (CONFIG_ARCH_CEIVA)
+
+#endif
diff --git a/arch/arm/mach-clps711x/include/mach/io.h b/arch/arm/mach-clps711x/include/mach/io.h
new file mode 100644
index 000000000000..4c8440087679
--- /dev/null
+++ b/arch/arm/mach-clps711x/include/mach/io.h
@@ -0,0 +1,38 @@
+/*
+ *  arch/arm/mach-clps711x/include/mach/io.h
+ *
+ *  Copyright (C) 1999 ARM Limited
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#ifndef __ASM_ARM_ARCH_IO_H
+#define __ASM_ARM_ARCH_IO_H
+
+#include <mach/hardware.h>
+
+#define IO_SPACE_LIMIT 0xffffffff
+
+#define __io(a)			((void __iomem *)(a))
+#define __mem_pci(a)		(a)
+
+/*
+ * We don't support ins[lb]/outs[lb].  Make them fault.
+ */
+#define __raw_readsb(p,d,l)	do { *(int *)0 = 0; } while (0)
+#define __raw_readsl(p,d,l)	do { *(int *)0 = 0; } while (0)
+#define __raw_writesb(p,d,l)	do { *(int *)0 = 0; } while (0)
+#define __raw_writesl(p,d,l)	do { *(int *)0 = 0; } while (0)
+
+#endif
diff --git a/arch/arm/mach-clps711x/include/mach/irqs.h b/arch/arm/mach-clps711x/include/mach/irqs.h
new file mode 100644
index 000000000000..30b7e97285a4
--- /dev/null
+++ b/arch/arm/mach-clps711x/include/mach/irqs.h
@@ -0,0 +1,53 @@
+/*
+ *  arch/arm/mach-clps711x/include/mach/irqs.h
+ *
+ *  Copyright (C) 2000 Deep Blue Solutions Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+/*
+ * Interrupts from INTSR1
+ */
+#define IRQ_CSINT			4
+#define IRQ_EINT1			5
+#define IRQ_EINT2			6
+#define IRQ_EINT3			7
+#define IRQ_TC1OI			8
+#define IRQ_TC2OI			9
+#define IRQ_RTCMI			10
+#define IRQ_TINT			11
+#define IRQ_UTXINT1			12
+#define IRQ_URXINT1			13
+#define IRQ_UMSINT			14
+#define IRQ_SSEOTI			15
+
+#define INT1_IRQS			(0x0000fff0)
+#define INT1_ACK_IRQS			(0x00004f10)
+
+/*
+ * Interrupts from INTSR2
+ */
+#define IRQ_KBDINT			(16+0)	/* bit 0 */
+#define IRQ_SS2RX			(16+1)	/* bit 1 */
+#define IRQ_SS2TX			(16+2)	/* bit 2 */
+#define IRQ_UTXINT2			(16+12)	/* bit 12 */
+#define IRQ_URXINT2			(16+13)	/* bit 13 */
+
+#define INT2_IRQS			(0x30070000)
+#define INT2_ACK_IRQS			(0x00010000)
+
+#define NR_IRQS                         30
+
diff --git a/arch/arm/mach-clps711x/include/mach/memory.h b/arch/arm/mach-clps711x/include/mach/memory.h
new file mode 100644
index 000000000000..71c2fa70c8e8
--- /dev/null
+++ b/arch/arm/mach-clps711x/include/mach/memory.h
@@ -0,0 +1,94 @@
+/*
+ *  arch/arm/mach-clps711x/include/mach/memory.h
+ *
+ *  Copyright (C) 1999 ARM Limited
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#ifndef __ASM_ARCH_MEMORY_H
+#define __ASM_ARCH_MEMORY_H
+
+
+/*
+ * Physical DRAM offset.
+ */
+#define PHYS_OFFSET	UL(0xc0000000)
+
+/*
+ * Virtual view <-> DMA view memory address translations
+ * virt_to_bus: Used to translate the virtual address to an
+ *              address suitable to be passed to set_dma_addr
+ * bus_to_virt: Used to convert an address for DMA operations
+ *              to an address that the kernel can use.
+ */
+
+#if defined(CONFIG_ARCH_CDB89712)
+
+#define __virt_to_bus(x)	(x)
+#define __bus_to_virt(x)	(x)
+
+#elif defined (CONFIG_ARCH_AUTCPU12)
+
+#define __virt_to_bus(x)	(x)
+#define __bus_to_virt(x)	(x)
+
+#else
+
+#define __virt_to_bus(x)	((x) - PAGE_OFFSET)
+#define __bus_to_virt(x)	((x) + PAGE_OFFSET)
+
+#endif
+
+
+/*
+ * Like the SA1100, the EDB7211 has a large gap between physical RAM
+ * banks.  In 2.2, the Psion (CL-PS7110) port added custom support for
+ * discontiguous physical memory.  In 2.4, we can use the standard
+ * Linux NUMA support.
+ *
+ * This is not necessary for EP7211 implementations with only one used
+ * memory bank.  For those systems, simply undefine CONFIG_DISCONTIGMEM.
+ */
+
+/*
+ * The PS7211 allows up to 256MB max per DRAM bank, but the EDB7211
+ * uses only one of the two banks (bank #1).  However, even within
+ * bank #1, memory is discontiguous.
+ *
+ * The EDB7211 has two 8MB DRAM areas with 8MB of empty space between
+ * them, so we use 24 for the node max shift to get 16MB node sizes.
+ */
+
+/*
+ * Because of the wide memory address space between physical RAM banks on the 
+ * SA1100, it's much more convenient to use Linux's NUMA support to implement
+ * our memory map representation.  Assuming all memory nodes have equal access 
+ * characteristics, we then have generic discontiguous memory support.
+ *
+ * Of course, all this isn't mandatory for SA1100 implementations with only
+ * one used memory bank.  For those, simply undefine CONFIG_DISCONTIGMEM.
+ *
+ * The nodes are matched with the physical memory bank addresses which are 
+ * incidentally the same as virtual addresses.
+ * 
+ * 	node 0:  0xc0000000 - 0xc7ffffff
+ * 	node 1:  0xc8000000 - 0xcfffffff
+ * 	node 2:  0xd0000000 - 0xd7ffffff
+ * 	node 3:  0xd8000000 - 0xdfffffff
+ */
+#define NODE_MEM_SIZE_BITS	24
+
+#endif
+
diff --git a/include/asm-arm/arch-clps711x/syspld.h b/arch/arm/mach-clps711x/include/mach/syspld.h
index 960578a22a8e..f7f4c1201898 100644
--- a/include/asm-arm/arch-clps711x/syspld.h
+++ b/arch/arm/mach-clps711x/include/mach/syspld.h
@@ -1,5 +1,5 @@
 /*
- *  linux/include/asm-arm/arch-clps711x/syspld.h
+ *  arch/arm/mach-clps711x/include/mach/syspld.h
  *
  *  System Control PLD register definitions.
  *
diff --git a/arch/arm/mach-clps711x/include/mach/system.h b/arch/arm/mach-clps711x/include/mach/system.h
new file mode 100644
index 000000000000..a8eade40317f
--- /dev/null
+++ b/arch/arm/mach-clps711x/include/mach/system.h
@@ -0,0 +1,40 @@
+/*
+ *  arch/arm/mach-clps711x/include/mach/system.h
+ *
+ *  Copyright (C) 2000 Deep Blue Solutions Ltd
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#ifndef __ASM_ARCH_SYSTEM_H
+#define __ASM_ARCH_SYSTEM_H
+
+#include <mach/hardware.h>
+#include <asm/hardware/clps7111.h>
+#include <asm/io.h>
+
+static inline void arch_idle(void)
+{
+	clps_writel(1, HALT);
+	__asm__ __volatile__(
+	"mov	r0, r0\n\
+	mov	r0, r0");
+}
+
+static inline void arch_reset(char mode)
+{
+	cpu_reset(0);
+}
+
+#endif
diff --git a/arch/arm/mach-clps711x/include/mach/time.h b/arch/arm/mach-clps711x/include/mach/time.h
new file mode 100644
index 000000000000..8fe283ccd1f3
--- /dev/null
+++ b/arch/arm/mach-clps711x/include/mach/time.h
@@ -0,0 +1,49 @@
+/*
+ *  arch/arm/mach-clps711x/include/mach/time.h
+ *
+ *  Copyright (C) 2000 Deep Blue Solutions Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#include <asm/leds.h>
+#include <asm/hardware/clps7111.h>
+
+extern void clps711x_setup_timer(void);
+
+/*
+ * IRQ handler for the timer
+ */
+static irqreturn_t
+p720t_timer_interrupt(int irq, void *dev_id)
+{
+	struct pt_regs *regs = get_irq_regs();
+	do_leds();
+	do_timer(1);
+#ifndef CONFIG_SMP
+	update_process_times(user_mode(regs));
+#endif
+	do_profile(regs);
+	return IRQ_HANDLED;
+}
+
+/*
+ * Set up timer interrupt, and return the current time in seconds.
+ */
+void __init time_init(void)
+{
+	clps711x_setup_timer();
+	timer_irq.handler = p720t_timer_interrupt;
+	setup_irq(IRQ_TC2OI, &timer_irq);
+}
diff --git a/arch/arm/mach-clps711x/include/mach/timex.h b/arch/arm/mach-clps711x/include/mach/timex.h
new file mode 100644
index 000000000000..ac8823ccff93
--- /dev/null
+++ b/arch/arm/mach-clps711x/include/mach/timex.h
@@ -0,0 +1,23 @@
+/*
+ *  arch/arm/mach-clps711x/include/mach/timex.h
+ *
+ *  Prospector 720T architecture timex specifications
+ *
+ *  Copyright (C) 2000 Deep Blue Solutions Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#define CLOCK_TICK_RATE 512000
diff --git a/arch/arm/mach-clps711x/include/mach/uncompress.h b/arch/arm/mach-clps711x/include/mach/uncompress.h
new file mode 100644
index 000000000000..7164310dea7c
--- /dev/null
+++ b/arch/arm/mach-clps711x/include/mach/uncompress.h
@@ -0,0 +1,59 @@
+/*
+ *  arch/arm/mach-clps711x/include/mach/uncompress.h
+ *
+ *  Copyright (C) 2000 Deep Blue Solutions Ltd
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#include <mach/io.h>
+#include <mach/hardware.h>
+#include <asm/hardware/clps7111.h>
+
+#undef CLPS7111_BASE
+#define CLPS7111_BASE CLPS7111_PHYS_BASE
+
+#define __raw_readl(p)		(*(unsigned long *)(p))
+#define __raw_writel(v,p)	(*(unsigned long *)(p) = (v))
+
+#ifdef CONFIG_DEBUG_CLPS711X_UART2
+#define SYSFLGx	SYSFLG2
+#define UARTDRx	UARTDR2
+#else
+#define SYSFLGx	SYSFLG1
+#define UARTDRx	UARTDR1
+#endif
+
+/*
+ * This does not append a newline
+ */
+static inline void putc(int c)
+{
+	while (clps_readl(SYSFLGx) & SYSFLG_UTXFF)
+		barrier();
+	clps_writel(c, UARTDRx);
+}
+
+static inline void flush(void)
+{
+	while (clps_readl(SYSFLGx) & SYSFLG_UBUSY)
+		barrier();
+}
+
+/*
+ * nothing to do
+ */
+#define arch_decomp_setup()
+
+#define arch_decomp_wdog()
diff --git a/arch/arm/mach-clps711x/include/mach/vmalloc.h b/arch/arm/mach-clps711x/include/mach/vmalloc.h
new file mode 100644
index 000000000000..ea6cc7beff28
--- /dev/null
+++ b/arch/arm/mach-clps711x/include/mach/vmalloc.h
@@ -0,0 +1,20 @@
+/*
+ *  arch/arm/mach-clps711x/include/mach/vmalloc.h
+ *
+ *  Copyright (C) 2000 Deep Blue Solutions Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#define VMALLOC_END       (PAGE_OFFSET + 0x10000000)
diff --git a/arch/arm/mach-clps711x/irq.c b/arch/arm/mach-clps711x/irq.c
index ca102960f528..38623cfcac5a 100644
--- a/arch/arm/mach-clps711x/irq.c
+++ b/arch/arm/mach-clps711x/irq.c
@@ -21,7 +21,7 @@
 #include <linux/list.h>
 
 #include <asm/mach/irq.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 #include <asm/irq.h>
 
diff --git a/arch/arm/mach-clps711x/mm.c b/arch/arm/mach-clps711x/mm.c
index a00f77ef8df8..a7b4591205a3 100644
--- a/arch/arm/mach-clps711x/mm.c
+++ b/arch/arm/mach-clps711x/mm.c
@@ -25,7 +25,7 @@
 #include <linux/bootmem.h>
 
 #include <asm/sizes.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/pgtable.h>
 #include <asm/page.h>
 #include <asm/mach/map.h>
diff --git a/arch/arm/mach-clps711x/p720t-leds.c b/arch/arm/mach-clps711x/p720t-leds.c
index 4915b3524963..262c3c361453 100644
--- a/arch/arm/mach-clps711x/p720t-leds.c
+++ b/arch/arm/mach-clps711x/p720t-leds.c
@@ -22,7 +22,7 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 #include <asm/leds.h>
 #include <asm/system.h>
diff --git a/arch/arm/mach-clps711x/p720t.c b/arch/arm/mach-clps711x/p720t.c
index c8ecd2480c27..f51f97d4f212 100644
--- a/arch/arm/mach-clps711x/p720t.c
+++ b/arch/arm/mach-clps711x/p720t.c
@@ -23,7 +23,7 @@
 #include <linux/string.h>
 #include <linux/mm.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 #include <asm/pgtable.h>
 #include <asm/page.h>
@@ -32,7 +32,7 @@
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
-#include <asm/arch/syspld.h>
+#include <mach/syspld.h>
 
 #include "common.h"
 
diff --git a/arch/arm/mach-clps711x/time.c b/arch/arm/mach-clps711x/time.c
index e5dc33f1f95c..ef1fcd17189e 100644
--- a/arch/arm/mach-clps711x/time.c
+++ b/arch/arm/mach-clps711x/time.c
@@ -22,7 +22,7 @@
 #include <linux/irq.h>
 #include <linux/sched.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/irq.h>
 #include <asm/leds.h>
 #include <asm/io.h>
diff --git a/arch/arm/mach-clps7500/core.c b/arch/arm/mach-clps7500/core.c
index 2ac63671ea5f..cc1b82179e83 100644
--- a/arch/arm/mach-clps7500/core.c
+++ b/arch/arm/mach-clps7500/core.c
@@ -21,7 +21,7 @@
 #include <asm/mach/irq.h>
 #include <asm/mach/time.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/hardware/iomd.h>
 #include <asm/io.h>
 #include <asm/irq.h>
diff --git a/include/asm-arm/arch-cl7500/acornfb.h b/arch/arm/mach-clps7500/include/mach/acornfb.h
index aea6330c9745..aea6330c9745 100644
--- a/include/asm-arm/arch-cl7500/acornfb.h
+++ b/arch/arm/mach-clps7500/include/mach/acornfb.h
diff --git a/arch/arm/mach-clps7500/include/mach/debug-macro.S b/arch/arm/mach-clps7500/include/mach/debug-macro.S
new file mode 100644
index 000000000000..af4104e7e84a
--- /dev/null
+++ b/arch/arm/mach-clps7500/include/mach/debug-macro.S
@@ -0,0 +1,21 @@
+/* arch/arm/mach-clps7500/include/mach/debug-macro.S
+ *
+ * Debugging macro include header
+ *
+ *  Copyright (C) 1994-1999 Russell King
+ *  Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+*/
+
+		.macro	addruart,rx
+		mov	\rx, #0xe0000000
+		orr	\rx, \rx, #0x00010000
+		orr	\rx, \rx, #0x00000be0
+		.endm
+
+#define UART_SHIFT	2
+#include <asm/hardware/debug-8250.S>
diff --git a/arch/arm/mach-clps7500/include/mach/dma.h b/arch/arm/mach-clps7500/include/mach/dma.h
new file mode 100644
index 000000000000..63fcde505498
--- /dev/null
+++ b/arch/arm/mach-clps7500/include/mach/dma.h
@@ -0,0 +1,21 @@
+/*
+ * arch/arm/mach-clps7500/include/mach/dma.h
+ *
+ * Copyright (C) 1999 Nexus Electronics Ltd.
+ */
+
+#ifndef __ASM_ARCH_DMA_H
+#define __ASM_ARCH_DMA_H
+
+/* DMA is not yet implemented! It should be the same as acorn, copy over.. */
+
+/*
+ * This is the maximum DMA address that can be DMAd to.
+ * There should not be more than (0xd0000000 - 0xc0000000)
+ * bytes of RAM.
+ */
+#define MAX_DMA_ADDRESS		0xd0000000
+
+#define DMA_S0			0
+
+#endif /* _ASM_ARCH_DMA_H */
diff --git a/arch/arm/mach-clps7500/include/mach/entry-macro.S b/arch/arm/mach-clps7500/include/mach/entry-macro.S
new file mode 100644
index 000000000000..4e7e54144093
--- /dev/null
+++ b/arch/arm/mach-clps7500/include/mach/entry-macro.S
@@ -0,0 +1,16 @@
+#include <mach/hardware.h>
+#include <asm/hardware/entry-macro-iomd.S>
+
+	.equ	ioc_base_high, IOC_BASE & 0xff000000
+	.equ	ioc_base_low, IOC_BASE & 0x00ff0000
+
+	.macro  get_irqnr_preamble, base, tmp
+	mov	\base, #ioc_base_high		@ point at IOC
+	.if	ioc_base_low
+	orr	\base, \base, #ioc_base_low
+	.endif
+	.endm
+
+	.macro  arch_ret_to_user, tmp1, tmp2
+	.endm
+
diff --git a/arch/arm/mach-clps7500/include/mach/hardware.h b/arch/arm/mach-clps7500/include/mach/hardware.h
new file mode 100644
index 000000000000..d66578a3371c
--- /dev/null
+++ b/arch/arm/mach-clps7500/include/mach/hardware.h
@@ -0,0 +1,67 @@
+/*
+ * arch/arm/mach-clps7500/include/mach/hardware.h
+ *
+ * Copyright (C) 1996-1999 Russell King.
+ * Copyright (C) 1999 Nexus Electronics Ltd.
+ *
+ * This file contains the hardware definitions of the 
+ * CL7500 evaluation board.
+ */
+#ifndef __ASM_ARCH_HARDWARE_H
+#define __ASM_ARCH_HARDWARE_H
+
+#include <mach/memory.h>
+#include <asm/hardware/iomd.h>
+
+#ifdef __ASSEMBLY__
+#define IOMEM(x) x
+#else
+#define IOMEM(x) ((void __iomem *)(x))
+#endif
+
+/*
+ * What hardware must be present
+ */
+#define HAS_IOMD
+#define HAS_VIDC20
+
+/* Hardware addresses of major areas.
+ *  *_START is the physical address
+ *  *_SIZE  is the size of the region
+ *  *_BASE  is the virtual address
+ */
+
+#define IO_START		0x03000000	/* I/O */
+#define IO_SIZE			0x01000000
+#define IO_BASE			IOMEM(0xe0000000)
+
+#define ISA_START		0x0c000000	/* ISA */
+#define ISA_SIZE		0x00010000
+#define ISA_BASE		0xe1000000
+
+#define FLASH_START		0x01000000	/* XXX */
+#define FLASH_SIZE		0x01000000
+#define FLASH_BASE		0xe2000000
+
+#define LED_START		0x0302B000
+#define LED_SIZE		0x00001000
+#define LED_BASE		0xe3000000
+#define LED_ADDRESS		(LED_BASE + 0xa00)
+
+/* Let's define SCREEN_START for CL7500, even though it's a lie. */
+#define SCREEN_START		0x02000000	/* VRAM */
+#define SCREEN_END		0xdfc00000
+#define SCREEN_BASE		0xdf800000
+
+#define VIDC_BASE		(void __iomem *)0xe0400000
+#define IOMD_BASE		IOMEM(0xe0200000)
+#define IOC_BASE		IOMEM(0xe0200000)
+#define FLOPPYDMA_BASE		IOMEM(0xe002a000)
+#define PCIO_BASE		IOMEM(0xe0010000)
+
+#define vidc_writel(val)	__raw_writel(val, VIDC_BASE)
+
+/* in/out bias for the ISA slot region */
+#define ISASLOT_IO		0x80400000
+
+#endif
diff --git a/arch/arm/mach-clps7500/include/mach/io.h b/arch/arm/mach-clps7500/include/mach/io.h
new file mode 100644
index 000000000000..2ff2860889ed
--- /dev/null
+++ b/arch/arm/mach-clps7500/include/mach/io.h
@@ -0,0 +1,255 @@
+/*
+ * arch/arm/mach-clps7500/include/mach/io.h
+ *  from arch/arm/mach-rpc/include/mach/io.h
+ *
+ * Copyright (C) 1997 Russell King
+ *
+ * Modifications:
+ *  06-Dec-1997	RMK	Created.
+ */
+#ifndef __ASM_ARM_ARCH_IO_H
+#define __ASM_ARM_ARCH_IO_H
+
+#include <mach/hardware.h>
+
+#define IO_SPACE_LIMIT 0xffffffff
+
+/*
+ * GCC is totally crap at loading/storing data.  We try to persuade it
+ * to do the right thing by using these whereever possible instead of
+ * the above.
+ */
+#define __arch_base_getb(b,o)			\
+ ({						\
+	unsigned int v, r = (b);		\
+	__asm__ __volatile__(			\
+		"ldrb	%0, [%1, %2]"		\
+		: "=r" (v)			\
+		: "r" (r), "Ir" (o));		\
+	v;					\
+ })
+
+#define __arch_base_getl(b,o)			\
+ ({						\
+	unsigned int v, r = (b);		\
+	__asm__ __volatile__(			\
+		"ldr	%0, [%1, %2]"		\
+		: "=r" (v)			\
+		: "r" (r), "Ir" (o));		\
+	v;					\
+ })
+
+#define __arch_base_putb(v,b,o)			\
+ ({						\
+	unsigned int r = (b);			\
+	__asm__ __volatile__(			\
+		"strb	%0, [%1, %2]"		\
+		:				\
+		: "r" (v), "r" (r), "Ir" (o));	\
+ })
+
+#define __arch_base_putl(v,b,o)			\
+ ({						\
+	unsigned int r = (b);			\
+	__asm__ __volatile__(			\
+		"str	%0, [%1, %2]"		\
+		:				\
+		: "r" (v), "r" (r), "Ir" (o));	\
+ })
+
+/*
+ * We use two different types of addressing - PC style addresses, and ARM
+ * addresses.  PC style accesses the PC hardware with the normal PC IO
+ * addresses, eg 0x3f8 for serial#1.  ARM addresses are 0x80000000+
+ * and are translated to the start of IO.  Note that all addresses are
+ * shifted left!
+ */
+#define __PORT_PCIO(x)	(!((x) & 0x80000000))
+
+/*
+ * Dynamic IO functions - let the compiler
+ * optimize the expressions
+ */
+static inline void __outb (unsigned int value, unsigned int port)
+{
+	unsigned long temp;
+	__asm__ __volatile__(
+	"tst	%2, #0x80000000\n\t"
+	"mov	%0, %4\n\t"
+	"addeq	%0, %0, %3\n\t"
+	"strb	%1, [%0, %2, lsl #2]	@ outb"
+	: "=&r" (temp)
+	: "r" (value), "r" (port), "Ir" (PCIO_BASE - IO_BASE), "Ir" (IO_BASE)
+	: "cc");
+}
+
+static inline void __outw (unsigned int value, unsigned int port)
+{
+	unsigned long temp;
+	__asm__ __volatile__(
+	"tst	%2, #0x80000000\n\t"
+	"mov	%0, %4\n\t"
+	"addeq	%0, %0, %3\n\t"
+	"str	%1, [%0, %2, lsl #2]	@ outw"
+	: "=&r" (temp)
+	: "r" (value|value<<16), "r" (port), "Ir" (PCIO_BASE - IO_BASE), "Ir" (IO_BASE)
+	: "cc");
+}
+
+static inline void __outl (unsigned int value, unsigned int port)
+{
+	unsigned long temp;
+	__asm__ __volatile__(
+	"tst	%2, #0x80000000\n\t"
+	"mov	%0, %4\n\t"
+	"addeq	%0, %0, %3\n\t"
+	"str	%1, [%0, %2, lsl #2]	@ outl"
+	: "=&r" (temp)
+	: "r" (value), "r" (port), "Ir" (PCIO_BASE - IO_BASE), "Ir" (IO_BASE)
+	: "cc");
+}
+
+#define DECLARE_DYN_IN(sz,fnsuffix,instr)					\
+static inline unsigned sz __in##fnsuffix (unsigned int port)		\
+{										\
+	unsigned long temp, value;						\
+	__asm__ __volatile__(							\
+	"tst	%2, #0x80000000\n\t"						\
+	"mov	%0, %4\n\t"							\
+	"addeq	%0, %0, %3\n\t"							\
+	"ldr" instr "	%1, [%0, %2, lsl #2]	@ in" #fnsuffix			\
+	: "=&r" (temp), "=r" (value)						\
+	: "r" (port), "Ir" (PCIO_BASE - IO_BASE), "Ir" (IO_BASE)		\
+	: "cc");								\
+	return (unsigned sz)value;						\
+}
+
+static inline unsigned int __ioaddr (unsigned int port)			\
+{										\
+	if (__PORT_PCIO(port))							\
+		return (unsigned int)(PCIO_BASE + (port << 2));			\
+	else									\
+		return (unsigned int)(IO_BASE + (port << 2));			\
+}
+
+#define DECLARE_IO(sz,fnsuffix,instr)	\
+	DECLARE_DYN_IN(sz,fnsuffix,instr)
+
+DECLARE_IO(char,b,"b")
+DECLARE_IO(short,w,"")
+DECLARE_IO(int,l,"")
+
+#undef DECLARE_IO
+#undef DECLARE_DYN_IN
+
+/*
+ * Constant address IO functions
+ *
+ * These have to be macros for the 'J' constraint to work -
+ * +/-4096 immediate operand.
+ */
+#define __outbc(value,port)							\
+({										\
+	if (__PORT_PCIO((port)))						\
+		__asm__ __volatile__(						\
+		"strb	%0, [%1, %2]	@ outbc"				\
+		: : "r" (value), "r" (PCIO_BASE), "Jr" ((port) << 2));		\
+	else									\
+		__asm__ __volatile__(						\
+		"strb	%0, [%1, %2]	@ outbc"				\
+		: : "r" (value), "r" (IO_BASE), "r" ((port) << 2));		\
+})
+
+#define __inbc(port)								\
+({										\
+	unsigned char result;							\
+	if (__PORT_PCIO((port)))						\
+		__asm__ __volatile__(						\
+		"ldrb	%0, [%1, %2]	@ inbc"					\
+		: "=r" (result) : "r" (PCIO_BASE), "Jr" ((port) << 2));		\
+	else									\
+		__asm__ __volatile__(						\
+		"ldrb	%0, [%1, %2]	@ inbc"					\
+		: "=r" (result) : "r" (IO_BASE), "r" ((port) << 2));		\
+	result;									\
+})
+
+#define __outwc(value,port)							\
+({										\
+	unsigned long v = value;						\
+	if (__PORT_PCIO((port)))						\
+		__asm__ __volatile__(						\
+		"str	%0, [%1, %2]	@ outwc"				\
+		: : "r" (v|v<<16), "r" (PCIO_BASE), "Jr" ((port) << 2));	\
+	else									\
+		__asm__ __volatile__(						\
+		"str	%0, [%1, %2]	@ outwc"				\
+		: : "r" (v|v<<16), "r" (IO_BASE), "r" ((port) << 2));		\
+})
+
+#define __inwc(port)								\
+({										\
+	unsigned short result;							\
+	if (__PORT_PCIO((port)))						\
+		__asm__ __volatile__(						\
+		"ldr	%0, [%1, %2]	@ inwc"					\
+		: "=r" (result) : "r" (PCIO_BASE), "Jr" ((port) << 2));		\
+	else									\
+		__asm__ __volatile__(						\
+		"ldr	%0, [%1, %2]	@ inwc"					\
+		: "=r" (result) : "r" (IO_BASE), "r" ((port) << 2));		\
+	result & 0xffff;							\
+})
+
+#define __outlc(value,port)							\
+({										\
+	unsigned long v = value;						\
+	if (__PORT_PCIO((port)))						\
+		__asm__ __volatile__(						\
+		"str	%0, [%1, %2]	@ outlc"				\
+		: : "r" (v), "r" (PCIO_BASE), "Jr" ((port) << 2));		\
+	else									\
+		__asm__ __volatile__(						\
+		"str	%0, [%1, %2]	@ outlc"				\
+		: : "r" (v), "r" (IO_BASE), "r" ((port) << 2));			\
+})
+
+#define __inlc(port)								\
+({										\
+	unsigned long result;							\
+	if (__PORT_PCIO((port)))						\
+		__asm__ __volatile__(						\
+		"ldr	%0, [%1, %2]	@ inlc"					\
+		: "=r" (result) : "r" (PCIO_BASE), "Jr" ((port) << 2));		\
+	else									\
+		__asm__ __volatile__(						\
+		"ldr	%0, [%1, %2]	@ inlc"					\
+		: "=r" (result) : "r" (IO_BASE), "r" ((port) << 2));		\
+	result;									\
+})
+
+#define __ioaddrc(port)								\
+	(__PORT_PCIO((port)) ? PCIO_BASE + ((port) << 2) : IO_BASE + ((port) << 2))
+
+#define inb(p)	 	(__builtin_constant_p((p)) ? __inbc(p)    : __inb(p))
+#define inw(p)	 	(__builtin_constant_p((p)) ? __inwc(p)    : __inw(p))
+#define inl(p)	 	(__builtin_constant_p((p)) ? __inlc(p)    : __inl(p))
+#define outb(v,p)	(__builtin_constant_p((p)) ? __outbc(v,p) : __outb(v,p))
+#define outw(v,p)	(__builtin_constant_p((p)) ? __outwc(v,p) : __outw(v,p))
+#define outl(v,p)	(__builtin_constant_p((p)) ? __outlc(v,p) : __outl(v,p))
+#define __ioaddr(p)	(__builtin_constant_p((p)) ? __ioaddr(p)  : __ioaddrc(p))
+/* the following macro is deprecated */
+#define ioaddr(port)			__ioaddr((port))
+
+#define insb(p,d,l)	__raw_readsb(__ioaddr(p),d,l)
+#define insw(p,d,l)	__raw_readsw(__ioaddr(p),d,l)
+
+#define outsb(p,d,l)	__raw_writesb(__ioaddr(p),d,l)
+#define outsw(p,d,l)	__raw_writesw(__ioaddr(p),d,l)
+
+/*
+ * 1:1 mapping for ioremapped regions.
+ */
+#define __mem_pci(x)	(x)
+
+#endif
diff --git a/arch/arm/mach-clps7500/include/mach/irq.h b/arch/arm/mach-clps7500/include/mach/irq.h
new file mode 100644
index 000000000000..e8da3c58df76
--- /dev/null
+++ b/arch/arm/mach-clps7500/include/mach/irq.h
@@ -0,0 +1,32 @@
+/*
+ * arch/arm/mach-clps7500/include/mach/irq.h
+ *
+ * Copyright (C) 1996 Russell King
+ * Copyright (C) 1999, 2001 Nexus Electronics Ltd.
+ *
+ * Changelog:
+ *   10-10-1996	RMK	Brought up to date with arch-sa110eval
+ *   22-08-1998	RMK	Restructured IRQ routines
+ *   11-08-1999	PJB	Created ARM7500 version, derived from RiscPC code
+ */
+
+#include <asm/hardware/iomd.h>
+#include <asm/io.h>
+
+static inline int fixup_irq(unsigned int irq)
+{
+	if (irq == IRQ_ISA) {
+		int isabits = *((volatile unsigned int *)0xe002b700);
+		if (isabits == 0) {
+			printk("Spurious ISA IRQ!\n");
+			return irq;
+		}
+		irq = IRQ_ISA_BASE;
+		while (!(isabits & 1)) {
+			irq++;
+			isabits >>= 1;
+		}
+	}
+
+	return irq;
+}
diff --git a/arch/arm/mach-clps7500/include/mach/irqs.h b/arch/arm/mach-clps7500/include/mach/irqs.h
new file mode 100644
index 000000000000..bee66b487f59
--- /dev/null
+++ b/arch/arm/mach-clps7500/include/mach/irqs.h
@@ -0,0 +1,66 @@
+/*
+ * arch/arm/mach-clps7500/include/mach/irqs.h
+ *
+ * Copyright (C) 1999 Nexus Electronics Ltd
+ */
+
+#define IRQ_INT2		0
+#define IRQ_INT1		2
+#define IRQ_VSYNCPULSE		3
+#define IRQ_POWERON		4
+#define IRQ_TIMER0		5
+#define IRQ_TIMER1		6
+#define IRQ_FORCE		7
+#define IRQ_INT8		8
+#define IRQ_ISA			9
+#define IRQ_INT6		10
+#define IRQ_INT5		11
+#define IRQ_INT4		12
+#define IRQ_INT3		13
+#define IRQ_KEYBOARDTX		14
+#define IRQ_KEYBOARDRX		15
+
+#define IRQ_DMA0		16
+#define IRQ_DMA1		17
+#define IRQ_DMA2		18
+#define IRQ_DMA3		19
+#define IRQ_DMAS0		20
+#define IRQ_DMAS1		21
+
+#define IRQ_IOP0		24
+#define IRQ_IOP1		25
+#define IRQ_IOP2		26
+#define IRQ_IOP3		27
+#define IRQ_IOP4		28
+#define IRQ_IOP5		29
+#define IRQ_IOP6		30
+#define IRQ_IOP7		31
+
+#define IRQ_MOUSERX		40
+#define IRQ_MOUSETX		41
+#define IRQ_ADC			42
+#define IRQ_EVENT1		43
+#define IRQ_EVENT2		44
+
+#define IRQ_ISA_BASE		48
+#define IRQ_ISA_3		48
+#define IRQ_ISA_4		49
+#define IRQ_ISA_5		50
+#define IRQ_ISA_7		51
+#define IRQ_ISA_9		52
+#define IRQ_ISA_10		53
+#define IRQ_ISA_11		54
+#define IRQ_ISA_14		55	
+
+#define FIQ_INT9		0
+#define FIQ_INT5		1
+#define FIQ_INT6		4
+#define FIQ_INT8		6
+#define FIQ_FORCE		7
+
+/*
+ * This is the offset of the FIQ "IRQ" numbers
+ */
+#define FIQ_START		64
+
+#define IRQ_TIMER		IRQ_TIMER0
diff --git a/arch/arm/mach-clps7500/include/mach/memory.h b/arch/arm/mach-clps7500/include/mach/memory.h
new file mode 100644
index 000000000000..3326aa99d3ec
--- /dev/null
+++ b/arch/arm/mach-clps7500/include/mach/memory.h
@@ -0,0 +1,35 @@
+/*
+ * arch/arm/mach-clps7500/include/mach/memory.h
+ *
+ * Copyright (c) 1996,1997,1998 Russell King.
+ *
+ * Changelog:
+ *  20-Oct-1996	RMK	Created
+ *  31-Dec-1997	RMK	Fixed definitions to reduce warnings
+ *  11-Jan-1998	RMK	Uninlined to reduce hits on cache
+ *  08-Feb-1998	RMK	Added __virt_to_bus and __bus_to_virt
+ *  21-Mar-1999	RMK	Renamed to memory.h
+ *		RMK	Added TASK_SIZE and PAGE_OFFSET
+ */
+#ifndef __ASM_ARCH_MEMORY_H
+#define __ASM_ARCH_MEMORY_H
+
+/*
+ * Physical DRAM offset.
+ */
+#define PHYS_OFFSET	UL(0x10000000)
+
+/*
+ * These are exactly the same on the RiscPC as the
+ * physical memory view.
+ */
+#define __virt_to_bus(x) __virt_to_phys(x)
+#define __bus_to_virt(x) __phys_to_virt(x)
+
+/*
+ * Cache flushing area - ROM
+ */
+#define FLUSH_BASE_PHYS		0x00000000
+#define FLUSH_BASE		0xdf000000
+
+#endif
diff --git a/arch/arm/mach-clps7500/include/mach/system.h b/arch/arm/mach-clps7500/include/mach/system.h
new file mode 100644
index 000000000000..624fc2830ae0
--- /dev/null
+++ b/arch/arm/mach-clps7500/include/mach/system.h
@@ -0,0 +1,23 @@
+/*
+ * arch/arm/mach-clps7500/include/mach/system.h
+ *
+ * Copyright (c) 1999 Nexus Electronics Ltd.
+ */
+#ifndef __ASM_ARCH_SYSTEM_H
+#define __ASM_ARCH_SYSTEM_H
+
+#include <asm/hardware/iomd.h>
+#include <asm/io.h>
+
+static inline void arch_idle(void)
+{
+	iomd_writeb(0, IOMD_SUSMODE);
+}
+
+#define arch_reset(mode)			\
+	do {					\
+		iomd_writeb(0, IOMD_ROMCR0);	\
+		cpu_reset(0);			\
+	} while (0)
+
+#endif
diff --git a/arch/arm/mach-clps7500/include/mach/timex.h b/arch/arm/mach-clps7500/include/mach/timex.h
new file mode 100644
index 000000000000..dfaa9b425757
--- /dev/null
+++ b/arch/arm/mach-clps7500/include/mach/timex.h
@@ -0,0 +1,13 @@
+/*
+ * arch/arm/mach-clps7500/include/mach/timex.h
+ *
+ * CL7500 architecture timex specifications
+ *
+ * Copyright (C) 1999 Nexus Electronics Ltd
+ */
+
+/*
+ * On the ARM7500, the clock ticks at 2MHz.
+ */
+#define CLOCK_TICK_RATE		2000000
+
diff --git a/arch/arm/mach-clps7500/include/mach/uncompress.h b/arch/arm/mach-clps7500/include/mach/uncompress.h
new file mode 100644
index 000000000000..d7d0af4b49fc
--- /dev/null
+++ b/arch/arm/mach-clps7500/include/mach/uncompress.h
@@ -0,0 +1,35 @@
+/*
+ * arch/arm/mach-clps7500/include/mach/uncompress.h
+ *
+ * Copyright (C) 1999, 2000 Nexus Electronics Ltd.
+ */
+#define BASE 0x03010000
+#define SERBASE (BASE + (0x2f8 << 2))
+
+static inline void putc(char c)
+{
+	while (!(*((volatile unsigned int *)(SERBASE + 0x14)) & 0x20))
+		barrier();
+
+	*((volatile unsigned int *)(SERBASE)) = c;
+}
+
+static inline void flush(void)
+{
+}
+
+static __inline__ void arch_decomp_setup(void)
+{
+	int baud = 3686400 / (9600 * 32);
+
+	*((volatile unsigned int *)(SERBASE + 0xC)) = 0x80;
+	*((volatile unsigned int *)(SERBASE + 0x0)) = baud & 0xff;
+	*((volatile unsigned int *)(SERBASE + 0x4)) = (baud & 0xff00) >> 8;
+	*((volatile unsigned int *)(SERBASE + 0xC)) = 3; /* 8 bits */
+	*((volatile unsigned int *)(SERBASE + 0x10)) = 3; /* DTR, RTS */
+}
+
+/*
+ * nothing to do
+ */
+#define arch_decomp_wdog()
diff --git a/arch/arm/mach-clps7500/include/mach/vmalloc.h b/arch/arm/mach-clps7500/include/mach/vmalloc.h
new file mode 100644
index 000000000000..8fc5406d1b6d
--- /dev/null
+++ b/arch/arm/mach-clps7500/include/mach/vmalloc.h
@@ -0,0 +1,4 @@
+/*
+ * arch/arm/mach-clps7500/include/mach/vmalloc.h
+ */
+#define VMALLOC_END       (PAGE_OFFSET + 0x1c000000)
diff --git a/arch/arm/mach-davinci/board-evm.c b/arch/arm/mach-davinci/board-evm.c
index 9e4024c4965f..134355787814 100644
--- a/arch/arm/mach-davinci/board-evm.c
+++ b/arch/arm/mach-davinci/board-evm.c
@@ -20,13 +20,13 @@
 #include <asm/setup.h>
 #include <asm/io.h>
 #include <asm/mach-types.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 #include <asm/mach/flash.h>
 
-#include <asm/arch/common.h>
+#include <mach/common.h>
 
 /* other misc. init functions */
 void __init davinci_psc_init(void);
diff --git a/arch/arm/mach-davinci/clock.c b/arch/arm/mach-davinci/clock.c
index c6b94f60e0b2..d46c69b55aaa 100644
--- a/arch/arm/mach-davinci/clock.c
+++ b/arch/arm/mach-davinci/clock.c
@@ -17,10 +17,10 @@
 #include <linux/mutex.h>
 #include <linux/platform_device.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 
-#include <asm/arch/psc.h>
+#include <mach/psc.h>
 #include "clock.h"
 
 /* PLL/Reset register offsets */
diff --git a/arch/arm/mach-davinci/gpio.c b/arch/arm/mach-davinci/gpio.c
index 9c67886e7189..c9cb4f09b18f 100644
--- a/arch/arm/mach-davinci/gpio.c
+++ b/arch/arm/mach-davinci/gpio.c
@@ -20,9 +20,9 @@
 #include <linux/irq.h>
 #include <linux/bitops.h>
 
-#include <asm/arch/irqs.h>
-#include <asm/arch/hardware.h>
-#include <asm/arch/gpio.h>
+#include <mach/irqs.h>
+#include <mach/hardware.h>
+#include <mach/gpio.h>
 
 #include <asm/mach/irq.h>
 
diff --git a/arch/arm/mach-davinci/include/mach/clock.h b/arch/arm/mach-davinci/include/mach/clock.h
new file mode 100644
index 000000000000..38bdd49bc181
--- /dev/null
+++ b/arch/arm/mach-davinci/include/mach/clock.h
@@ -0,0 +1,22 @@
+/*
+ * arch/arm/mach-davinci/include/mach/clock.h
+ *
+ * Clock control driver for DaVinci - header file
+ *
+ * Authors: Vladimir Barinov <source@mvista.com>
+ *
+ * 2007 (c) MontaVista Software, Inc. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+#ifndef __ASM_ARCH_DAVINCI_CLOCK_H
+#define __ASM_ARCH_DAVINCI_CLOCK_H
+
+struct clk;
+
+extern int clk_register(struct clk *clk);
+extern void clk_unregister(struct clk *clk);
+extern int davinci_clk_init(void);
+
+#endif
diff --git a/include/asm-arm/arch-davinci/common.h b/arch/arm/mach-davinci/include/mach/common.h
index a97dfbb15e57..a97dfbb15e57 100644
--- a/include/asm-arm/arch-davinci/common.h
+++ b/arch/arm/mach-davinci/include/mach/common.h
diff --git a/include/asm-arm/arch-davinci/debug-macro.S b/arch/arm/mach-davinci/include/mach/debug-macro.S
index e6c0f0d5d062..e6c0f0d5d062 100644
--- a/include/asm-arm/arch-davinci/debug-macro.S
+++ b/arch/arm/mach-davinci/include/mach/debug-macro.S
diff --git a/include/asm-arm/arch-davinci/dma.h b/arch/arm/mach-davinci/include/mach/dma.h
index 8e2f2d0ba667..8e2f2d0ba667 100644
--- a/include/asm-arm/arch-davinci/dma.h
+++ b/arch/arm/mach-davinci/include/mach/dma.h
diff --git a/arch/arm/mach-davinci/include/mach/entry-macro.S b/arch/arm/mach-davinci/include/mach/entry-macro.S
new file mode 100644
index 000000000000..039b84f933b3
--- /dev/null
+++ b/arch/arm/mach-davinci/include/mach/entry-macro.S
@@ -0,0 +1,32 @@
+/*
+ * Low-level IRQ helper macros for TI DaVinci-based platforms
+ *
+ * Author: Kevin Hilman, MontaVista Software, Inc. <source@mvista.com>
+ *
+ * 2007 (c) MontaVista Software, Inc. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+#include <mach/io.h>
+#include <mach/irqs.h>
+
+		.macro	disable_fiq
+		.endm
+
+		.macro  get_irqnr_preamble, base, tmp
+		ldr \base, =IO_ADDRESS(DAVINCI_ARM_INTC_BASE)
+		.endm
+
+		.macro  arch_ret_to_user, tmp1, tmp2
+		.endm
+
+		.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
+		ldr \tmp, [\base, #0x14]
+		mov \tmp, \tmp, lsr #2
+		sub \irqnr, \tmp, #1
+		cmp \tmp, #0
+		.endm
+
+		.macro	irq_prio_table
+		.endm
diff --git a/arch/arm/mach-davinci/include/mach/gpio.h b/arch/arm/mach-davinci/include/mach/gpio.h
new file mode 100644
index 000000000000..ec151ccf1e8f
--- /dev/null
+++ b/arch/arm/mach-davinci/include/mach/gpio.h
@@ -0,0 +1,159 @@
+/*
+ * TI DaVinci GPIO Support
+ *
+ * Copyright (c) 2006 David Brownell
+ * Copyright (c) 2007, MontaVista Software, Inc. <source@mvista.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef	__DAVINCI_GPIO_H
+#define	__DAVINCI_GPIO_H
+
+#include <linux/io.h>
+#include <mach/hardware.h>
+
+/*
+ * basic gpio routines
+ *
+ * board-specific init should be done by arch/.../.../board-XXX.c (maybe
+ * initializing banks together) rather than boot loaders; kexec() won't
+ * go through boot loaders.
+ *
+ * the gpio clock will be turned on when gpios are used, and you may also
+ * need to pay attention to PINMUX0 and PINMUX1 to be sure those pins are
+ * used as gpios, not with other peripherals.
+ *
+ * GPIOs are numbered 0..(DAVINCI_N_GPIO-1).  For documentation, and maybe
+ * for later updates, code should write GPIO(N) or:
+ *  - GPIOV18(N) for 1.8V pins, N in 0..53; same as GPIO(0)..GPIO(53)
+ *  - GPIOV33(N) for 3.3V pins, N in 0..17; same as GPIO(54)..GPIO(70)
+ *
+ * For GPIO IRQs use gpio_to_irq(GPIO(N)) or gpio_to_irq(GPIOV33(N)) etc
+ * for now, that's != GPIO(N)
+ */
+#define	GPIO(X)		(X)		/* 0 <= X <= 70 */
+#define	GPIOV18(X)	(X)		/* 1.8V i/o; 0 <= X <= 53 */
+#define	GPIOV33(X)	((X)+54)	/* 3.3V i/o; 0 <= X <= 17 */
+
+struct gpio_controller {
+	u32	dir;
+	u32	out_data;
+	u32	set_data;
+	u32	clr_data;
+	u32	in_data;
+	u32	set_rising;
+	u32	clr_rising;
+	u32	set_falling;
+	u32	clr_falling;
+	u32	intstat;
+};
+
+/* The __gpio_to_controller() and __gpio_mask() functions inline to constants
+ * with constant parameters; or in outlined code they execute at runtime.
+ *
+ * You'd access the controller directly when reading or writing more than
+ * one gpio value at a time, and to support wired logic where the value
+ * being driven by the cpu need not match the value read back.
+ *
+ * These are NOT part of the cross-platform GPIO interface
+ */
+static inline struct gpio_controller *__iomem
+__gpio_to_controller(unsigned gpio)
+{
+	void *__iomem ptr;
+
+	if (gpio < 32)
+		ptr = (void *__iomem)IO_ADDRESS(DAVINCI_GPIO_BASE + 0x10);
+	else if (gpio < 64)
+		ptr = (void *__iomem)IO_ADDRESS(DAVINCI_GPIO_BASE + 0x38);
+	else if (gpio < DAVINCI_N_GPIO)
+		ptr = (void *__iomem)IO_ADDRESS(DAVINCI_GPIO_BASE + 0x60);
+	else
+		ptr = NULL;
+	return ptr;
+}
+
+static inline u32 __gpio_mask(unsigned gpio)
+{
+	return 1 << (gpio % 32);
+}
+
+/* The get/set/clear functions will inline when called with constant
+ * parameters, for low-overhead bitbanging.  Illegal constant parameters
+ * cause link-time errors.
+ *
+ * Otherwise, calls with variable parameters use outlined functions.
+ */
+extern int __error_inval_gpio(void);
+
+extern void __gpio_set(unsigned gpio, int value);
+extern int __gpio_get(unsigned gpio);
+
+static inline void gpio_set_value(unsigned gpio, int value)
+{
+	if (__builtin_constant_p(value)) {
+		struct gpio_controller	*__iomem g;
+		u32			mask;
+
+		if (gpio >= DAVINCI_N_GPIO)
+			__error_inval_gpio();
+
+		g = __gpio_to_controller(gpio);
+		mask = __gpio_mask(gpio);
+		if (value)
+			__raw_writel(mask, &g->set_data);
+		else
+			__raw_writel(mask, &g->clr_data);
+		return;
+	}
+
+	__gpio_set(gpio, value);
+}
+
+/* Returns zero or nonzero; works for gpios configured as inputs OR
+ * as outputs.
+ *
+ * NOTE: changes in reported values are synchronized to the GPIO clock.
+ * This is most easily seen after calling gpio_set_value() and then immediatly
+ * gpio_get_value(), where the gpio_get_value() would return the old value
+ * until the GPIO clock ticks and the new value gets latched.
+ */
+
+static inline int gpio_get_value(unsigned gpio)
+{
+	struct gpio_controller *__iomem g;
+
+	if (!__builtin_constant_p(gpio))
+		return __gpio_get(gpio);
+
+	if (gpio >= DAVINCI_N_GPIO)
+		return __error_inval_gpio();
+
+	g = __gpio_to_controller(gpio);
+	return !!(__gpio_mask(gpio) & __raw_readl(&g->in_data));
+}
+
+/* powerup default direction is IN */
+extern int gpio_direction_input(unsigned gpio);
+extern int gpio_direction_output(unsigned gpio, int value);
+
+#include <asm-generic/gpio.h>	/* cansleep wrappers */
+
+extern int gpio_request(unsigned gpio, const char *tag);
+extern void gpio_free(unsigned gpio);
+
+static inline int gpio_to_irq(unsigned gpio)
+{
+	return DAVINCI_N_AINTC_IRQ + gpio;
+}
+
+static inline int irq_to_gpio(unsigned irq)
+{
+	return irq - DAVINCI_N_AINTC_IRQ;
+}
+
+#endif				/* __DAVINCI_GPIO_H */
diff --git a/include/asm-arm/arch-davinci/hardware.h b/arch/arm/mach-davinci/include/mach/hardware.h
index a2e8969afaca..a2e8969afaca 100644
--- a/include/asm-arm/arch-davinci/hardware.h
+++ b/arch/arm/mach-davinci/include/mach/hardware.h
diff --git a/include/asm-arm/arch-davinci/i2c.h b/arch/arm/mach-davinci/include/mach/i2c.h
index e2f54168abd1..e2f54168abd1 100644
--- a/include/asm-arm/arch-davinci/i2c.h
+++ b/arch/arm/mach-davinci/include/mach/i2c.h
diff --git a/include/asm-arm/arch-davinci/io.h b/arch/arm/mach-davinci/include/mach/io.h
index e7accb910864..e7accb910864 100644
--- a/include/asm-arm/arch-davinci/io.h
+++ b/arch/arm/mach-davinci/include/mach/io.h
diff --git a/include/asm-arm/arch-davinci/irqs.h b/arch/arm/mach-davinci/include/mach/irqs.h
index f4c5ca6da9f4..f4c5ca6da9f4 100644
--- a/include/asm-arm/arch-davinci/irqs.h
+++ b/arch/arm/mach-davinci/include/mach/irqs.h
diff --git a/include/asm-arm/arch-davinci/memory.h b/arch/arm/mach-davinci/include/mach/memory.h
index dd1625c23cf4..dd1625c23cf4 100644
--- a/include/asm-arm/arch-davinci/memory.h
+++ b/arch/arm/mach-davinci/include/mach/memory.h
diff --git a/include/asm-arm/arch-davinci/mux.h b/arch/arm/mach-davinci/include/mach/mux.h
index c24b6782804d..c24b6782804d 100644
--- a/include/asm-arm/arch-davinci/mux.h
+++ b/arch/arm/mach-davinci/include/mach/mux.h
diff --git a/include/asm-arm/arch-davinci/psc.h b/arch/arm/mach-davinci/include/mach/psc.h
index 4977aa071e1e..4977aa071e1e 100644
--- a/include/asm-arm/arch-davinci/psc.h
+++ b/arch/arm/mach-davinci/include/mach/psc.h
diff --git a/arch/arm/mach-davinci/include/mach/serial.h b/arch/arm/mach-davinci/include/mach/serial.h
new file mode 100644
index 000000000000..fb8cb229bfd2
--- /dev/null
+++ b/arch/arm/mach-davinci/include/mach/serial.h
@@ -0,0 +1,20 @@
+/*
+ * DaVinci serial device definitions
+ *
+ * Author: Kevin Hilman, MontaVista Software, Inc. <source@mvista.com>
+ *
+ * 2007 (c) MontaVista Software, Inc. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+#ifndef __ASM_ARCH_SERIAL_H
+#define __ASM_ARCH_SERIAL_H
+
+#include <mach/io.h>
+
+#define DAVINCI_UART0_BASE   (IO_PHYS + 0x20000)
+#define DAVINCI_UART1_BASE   (IO_PHYS + 0x20400)
+#define DAVINCI_UART2_BASE   (IO_PHYS + 0x20800)
+
+#endif /* __ASM_ARCH_SERIAL_H */
diff --git a/arch/arm/mach-davinci/include/mach/system.h b/arch/arm/mach-davinci/include/mach/system.h
new file mode 100644
index 000000000000..84ff77aeb738
--- /dev/null
+++ b/arch/arm/mach-davinci/include/mach/system.h
@@ -0,0 +1,29 @@
+/*
+ * DaVinci system defines
+ *
+ * Author: Kevin Hilman, MontaVista Software, Inc. <source@mvista.com>
+ *
+ * 2007 (c) MontaVista Software, Inc. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+#ifndef __ASM_ARCH_SYSTEM_H
+#define __ASM_ARCH_SYSTEM_H
+
+#include <asm/io.h>
+#include <mach/hardware.h>
+
+extern void davinci_watchdog_reset(void);
+
+static void arch_idle(void)
+{
+	cpu_do_idle();
+}
+
+static void arch_reset(char mode)
+{
+	davinci_watchdog_reset();
+}
+
+#endif /* __ASM_ARCH_SYSTEM_H */
diff --git a/include/asm-arm/arch-davinci/timex.h b/arch/arm/mach-davinci/include/mach/timex.h
index 52827567841d..52827567841d 100644
--- a/include/asm-arm/arch-davinci/timex.h
+++ b/arch/arm/mach-davinci/include/mach/timex.h
diff --git a/arch/arm/mach-davinci/include/mach/uncompress.h b/arch/arm/mach-davinci/include/mach/uncompress.h
new file mode 100644
index 000000000000..8c165def37b6
--- /dev/null
+++ b/arch/arm/mach-davinci/include/mach/uncompress.h
@@ -0,0 +1,35 @@
+/*
+ * Serial port stubs for kernel decompress status messages
+ *
+ *  Author:     Anant Gole
+ * (C) Copyright (C) 2006, Texas Instruments, Inc
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+#include <linux/types.h>
+#include <linux/serial_reg.h>
+#include <mach/serial.h>
+
+/* PORT_16C550A, in polled non-fifo mode */
+
+static void putc(char c)
+{
+	volatile u32 *uart = (volatile void *) DAVINCI_UART0_BASE;
+
+	while (!(uart[UART_LSR] & UART_LSR_THRE))
+		barrier();
+	uart[UART_TX] = c;
+}
+
+static inline void flush(void)
+{
+	volatile u32 *uart = (volatile void *) DAVINCI_UART0_BASE;
+	while (!(uart[UART_LSR] & UART_LSR_THRE))
+		barrier();
+}
+
+#define arch_decomp_setup()
+#define arch_decomp_wdog()
diff --git a/arch/arm/mach-davinci/include/mach/vmalloc.h b/arch/arm/mach-davinci/include/mach/vmalloc.h
new file mode 100644
index 000000000000..b98bd9e92fd6
--- /dev/null
+++ b/arch/arm/mach-davinci/include/mach/vmalloc.h
@@ -0,0 +1,15 @@
+/*
+ * DaVinci vmalloc definitions
+ *
+ * Author: Kevin Hilman, MontaVista Software, Inc. <source@mvista.com>
+ *
+ * 2007 (c) MontaVista Software, Inc. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+#include <asm/memory.h>
+#include <mach/io.h>
+
+/* Allow vmalloc range until the IO virtual range minus a 2M "hole" */
+#define VMALLOC_END	  (IO_VIRT - (2<<20))
diff --git a/arch/arm/mach-davinci/io.c b/arch/arm/mach-davinci/io.c
index 47787ff84a6a..5bb66b61c1a3 100644
--- a/arch/arm/mach-davinci/io.c
+++ b/arch/arm/mach-davinci/io.c
@@ -17,7 +17,7 @@
 #include <asm/memory.h>
 
 #include <asm/mach/map.h>
-#include <asm/arch/clock.h>
+#include <mach/clock.h>
 
 extern void davinci_check_revision(void);
 
diff --git a/arch/arm/mach-davinci/irq.c b/arch/arm/mach-davinci/irq.c
index 1333d84d2e45..12ca9f29f847 100644
--- a/arch/arm/mach-davinci/irq.c
+++ b/arch/arm/mach-davinci/irq.c
@@ -23,7 +23,7 @@
 #include <linux/interrupt.h>
 #include <linux/irq.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 #include <asm/mach/irq.h>
 
diff --git a/arch/arm/mach-davinci/mux.c b/arch/arm/mach-davinci/mux.c
index 92d26bd305b7..8ff9d8aca60b 100644
--- a/arch/arm/mach-davinci/mux.c
+++ b/arch/arm/mach-davinci/mux.c
@@ -11,9 +11,9 @@
 #include <linux/io.h>
 #include <linux/spinlock.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 
-#include <asm/arch/mux.h>
+#include <mach/mux.h>
 
 /* System control register offsets */
 #define PINMUX0         0x00
diff --git a/arch/arm/mach-davinci/psc.c b/arch/arm/mach-davinci/psc.c
index 1334416559ad..720c48b9ee04 100644
--- a/arch/arm/mach-davinci/psc.c
+++ b/arch/arm/mach-davinci/psc.c
@@ -23,9 +23,9 @@
 #include <linux/init.h>
 
 #include <asm/io.h>
-#include <asm/hardware.h>
-#include <asm/arch/psc.h>
-#include <asm/arch/mux.h>
+#include <mach/hardware.h>
+#include <mach/psc.h>
+#include <mach/mux.h>
 
 /* PSC register offsets */
 #define EPCPR		0x070
diff --git a/arch/arm/mach-davinci/serial.c b/arch/arm/mach-davinci/serial.c
index 8368c93c788d..caf101e2cc62 100644
--- a/arch/arm/mach-davinci/serial.c
+++ b/arch/arm/mach-davinci/serial.c
@@ -29,9 +29,9 @@
 
 #include <asm/io.h>
 #include <asm/irq.h>
-#include <asm/hardware.h>
-#include <asm/arch/serial.h>
-#include <asm/arch/irqs.h>
+#include <mach/hardware.h>
+#include <mach/serial.h>
+#include <mach/irqs.h>
 
 #define UART_DAVINCI_PWREMU 0x0c
 
diff --git a/arch/arm/mach-davinci/time.c b/arch/arm/mach-davinci/time.c
index e96a3dcdc1a7..206e80d41717 100644
--- a/arch/arm/mach-davinci/time.c
+++ b/arch/arm/mach-davinci/time.c
@@ -17,13 +17,13 @@
 #include <linux/spinlock.h>
 
 #include <asm/io.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/system.h>
 #include <asm/irq.h>
 #include <asm/mach/irq.h>
 #include <asm/mach/time.h>
 #include <asm/errno.h>
-#include <asm/arch/io.h>
+#include <mach/io.h>
 
 static struct clock_event_device clockevent_davinci;
 
diff --git a/arch/arm/mach-ebsa110/core.c b/arch/arm/mach-ebsa110/core.c
index 7710e14b5268..65cc7c271917 100644
--- a/arch/arm/mach-ebsa110/core.c
+++ b/arch/arm/mach-ebsa110/core.c
@@ -15,7 +15,7 @@
 #include <linux/serial_8250.h>
 #include <linux/init.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/irq.h>
 #include <asm/io.h>
 #include <asm/setup.h>
diff --git a/arch/arm/mach-ebsa110/include/mach/debug-macro.S b/arch/arm/mach-ebsa110/include/mach/debug-macro.S
new file mode 100644
index 000000000000..1dde8227f3a2
--- /dev/null
+++ b/arch/arm/mach-ebsa110/include/mach/debug-macro.S
@@ -0,0 +1,21 @@
+/* arch/arm/mach-ebsa110/include/mach/debug-macro.S
+ *
+ * Debugging macro include header
+ *
+ *  Copyright (C) 1994-1999 Russell King
+ *  Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+**/
+
+		.macro	addruart,rx
+		mov	\rx, #0xf0000000
+		orr	\rx, \rx, #0x00000be0
+		.endm
+
+#define UART_SHIFT	2
+#define FLOW_CONTROL
+#include <asm/hardware/debug-8250.S>
diff --git a/arch/arm/mach-ebsa110/include/mach/dma.h b/arch/arm/mach-ebsa110/include/mach/dma.h
new file mode 100644
index 000000000000..780a04c8bbe9
--- /dev/null
+++ b/arch/arm/mach-ebsa110/include/mach/dma.h
@@ -0,0 +1,11 @@
+/*
+ *  arch/arm/mach-ebsa110/include/mach/dma.h
+ *
+ *  Copyright (C) 1997,1998 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ *  EBSA110 DMA definitions
+ */
diff --git a/arch/arm/mach-ebsa110/include/mach/entry-macro.S b/arch/arm/mach-ebsa110/include/mach/entry-macro.S
new file mode 100644
index 000000000000..cc3e5992f6b3
--- /dev/null
+++ b/arch/arm/mach-ebsa110/include/mach/entry-macro.S
@@ -0,0 +1,39 @@
+/*
+ * arch/arm/mach-ebsa110/include/mach/entry-macro.S
+ *
+ * Low-level IRQ helper macros for ebsa110 platform.
+ *
+ * This file is licensed under  the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+
+
+#define IRQ_STAT		0xff000000	/* read */
+
+	.macro	disable_fiq
+	.endm
+
+	.macro  get_irqnr_preamble, base, tmp
+	mov	\base, #IRQ_STAT
+	.endm
+
+	.macro  arch_ret_to_user, tmp1, tmp2
+	.endm
+
+	.macro	get_irqnr_and_base, irqnr, stat, base, tmp
+	ldrb	\stat, [\base]			@ get interrupts
+	mov	\irqnr, #0
+	tst	\stat, #15
+	addeq	\irqnr, \irqnr, #4
+	moveq	\stat, \stat, lsr #4
+	tst	\stat, #3
+	addeq	\irqnr, \irqnr, #2
+	moveq	\stat, \stat, lsr #2
+	tst	\stat, #1
+	addeq	\irqnr, \irqnr, #1
+	moveq	\stat, \stat, lsr #1
+	tst	\stat, #1			@ bit 0 should be set
+	.endm
+
diff --git a/arch/arm/mach-ebsa110/include/mach/hardware.h b/arch/arm/mach-ebsa110/include/mach/hardware.h
new file mode 100644
index 000000000000..4b2fb7743909
--- /dev/null
+++ b/arch/arm/mach-ebsa110/include/mach/hardware.h
@@ -0,0 +1,63 @@
+/*
+ *  arch/arm/mach-ebsa110/include/mach/hardware.h
+ *
+ *  Copyright (C) 1996-2000 Russell King.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This file contains the hardware definitions of the EBSA-110.
+ */
+#ifndef __ASM_ARCH_HARDWARE_H
+#define __ASM_ARCH_HARDWARE_H
+
+/*
+ * The EBSA110 has a weird "ISA IO" region:
+ *
+ * Region 0 (addr = 0xf0000000 + io << 2)
+ * --------------------------------------------------------
+ * Physical region	IO region
+ * f0000fe0 - f0000ffc	3f8 - 3ff  ttyS0
+ * f0000e60 - f0000e64	398 - 399
+ * f0000de0 - f0000dfc	378 - 37f  lp0
+ * f0000be0 - f0000bfc	2f8 - 2ff  ttyS1
+ *
+ * Region 1 (addr = 0xf0000000 + (io & ~1) << 1 + (io & 1))
+ * --------------------------------------------------------
+ * Physical region	IO region
+ * f00014f1             a79        pnp write data
+ * f00007c0 - f00007c1	3e0 - 3e1  pcmcia
+ * f00004f1		279        pnp address
+ * f0000440 - f000046c  220 - 236  eth0
+ * f0000405		203        pnp read data
+ */
+
+#define ISAMEM_PHYS		0xe0000000
+#define ISAMEM_SIZE		0x10000000
+
+#define ISAIO_PHYS		0xf0000000
+#define ISAIO_SIZE		PGDIR_SIZE
+
+#define TRICK0_PHYS		0xf2000000
+#define TRICK1_PHYS		0xf2400000
+#define TRICK2_PHYS		0xf2800000
+#define TRICK3_PHYS		0xf2c00000
+#define TRICK4_PHYS		0xf3000000
+#define TRICK5_PHYS		0xf3400000
+#define TRICK6_PHYS		0xf3800000
+#define TRICK7_PHYS		0xf3c00000
+
+#define ISAMEM_BASE		0xe0000000
+#define ISAIO_BASE		0xf0000000
+
+#define PIT_BASE		0xfc000000
+#define SOFT_BASE		0xfd000000
+
+/*
+ * RAM definitions
+ */
+#define UNCACHEABLE_ADDR	0xff000000	/* IRQ_STAT */
+
+#endif
+
diff --git a/arch/arm/mach-ebsa110/include/mach/io.h b/arch/arm/mach-ebsa110/include/mach/io.h
new file mode 100644
index 000000000000..f68daa632af0
--- /dev/null
+++ b/arch/arm/mach-ebsa110/include/mach/io.h
@@ -0,0 +1,92 @@
+/*
+ *  arch/arm/mach-ebsa110/include/mach/io.h
+ *
+ *  Copyright (C) 1997,1998 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Modifications:
+ *  06-Dec-1997	RMK	Created.
+ */
+#ifndef __ASM_ARM_ARCH_IO_H
+#define __ASM_ARM_ARCH_IO_H
+
+#define IO_SPACE_LIMIT 0xffff
+
+u8 __inb8(unsigned int port);
+void __outb8(u8  val, unsigned int port);
+
+u8 __inb16(unsigned int port);
+void __outb16(u8  val, unsigned int port);
+
+u16 __inw(unsigned int port);
+void __outw(u16 val, unsigned int port);
+
+u32 __inl(unsigned int port);
+void __outl(u32 val, unsigned int port);
+
+u8  __readb(const volatile void __iomem *addr);
+u16 __readw(const volatile void __iomem *addr);
+u32 __readl(const volatile void __iomem *addr);
+
+void __writeb(u8  val, void __iomem *addr);
+void __writew(u16 val, void __iomem *addr);
+void __writel(u32 val, void __iomem *addr);
+
+/*
+ * Argh, someone forgot the IOCS16 line.  We therefore have to handle
+ * the byte stearing by selecting the correct byte IO functions here.
+ */
+#ifdef ISA_SIXTEEN_BIT_PERIPHERAL
+#define inb(p) 			__inb16(p)
+#define outb(v,p)		__outb16(v,p)
+#else
+#define inb(p)			__inb8(p)
+#define outb(v,p)		__outb8(v,p)
+#endif
+
+#define inw(p)			__inw(p)
+#define outw(v,p)		__outw(v,p)
+
+#define inl(p)			__inl(p)
+#define outl(v,p)		__outl(v,p)
+
+#define readb(b)		__readb(b)
+#define readw(b)		__readw(b)
+#define readl(b)		__readl(b)
+#define readb_relaxed(addr)	readb(addr)
+#define readw_relaxed(addr)	readw(addr)
+#define readl_relaxed(addr)	readl(addr)
+
+#define writeb(v,b)		__writeb(v,b)
+#define writew(v,b)		__writew(v,b)
+#define writel(v,b)		__writel(v,b)
+
+static inline void __iomem *__arch_ioremap(unsigned long cookie, size_t size,
+					   unsigned int flags)
+{
+	return (void __iomem *)cookie;
+}
+
+#define __arch_ioremap		__arch_ioremap
+#define __arch_iounmap(cookie)	do { } while (0)
+
+extern void insb(unsigned int port, void *buf, int sz);
+extern void insw(unsigned int port, void *buf, int sz);
+extern void insl(unsigned int port, void *buf, int sz);
+
+extern void outsb(unsigned int port, const void *buf, int sz);
+extern void outsw(unsigned int port, const void *buf, int sz);
+extern void outsl(unsigned int port, const void *buf, int sz);
+
+/* can't support writesb atm */
+extern void writesw(void __iomem *addr, const void *data, int wordlen);
+extern void writesl(void __iomem *addr, const void *data, int longlen);
+
+/* can't support readsb atm */
+extern void readsw(const void __iomem *addr, void *data, int wordlen);
+extern void readsl(const void __iomem *addr, void *data, int longlen);
+
+#endif
diff --git a/arch/arm/mach-ebsa110/include/mach/irqs.h b/arch/arm/mach-ebsa110/include/mach/irqs.h
new file mode 100644
index 000000000000..a8f3771bc060
--- /dev/null
+++ b/arch/arm/mach-ebsa110/include/mach/irqs.h
@@ -0,0 +1,20 @@
+/*
+ *  arch/arm/mach-ebsa110/include/mach/irqs.h
+ *
+ *  Copyright (C) 1996 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#define NR_IRQS			8
+
+#define IRQ_EBSA110_PRINTER	0
+#define IRQ_EBSA110_COM1	1
+#define IRQ_EBSA110_COM2	2
+#define IRQ_EBSA110_ETHERNET	3
+#define IRQ_EBSA110_TIMER0	4
+#define IRQ_EBSA110_TIMER1	5
+#define IRQ_EBSA110_PCMCIA	6
+#define IRQ_EBSA110_IMMEDIATE	7
diff --git a/arch/arm/mach-ebsa110/include/mach/memory.h b/arch/arm/mach-ebsa110/include/mach/memory.h
new file mode 100644
index 000000000000..eea4b75b657b
--- /dev/null
+++ b/arch/arm/mach-ebsa110/include/mach/memory.h
@@ -0,0 +1,37 @@
+/*
+ *  arch/arm/mach-ebsa110/include/mach/memory.h
+ *
+ *  Copyright (C) 1996-1999 Russell King.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ *  Changelog:
+ *   20-Oct-1996 RMK	Created
+ *   31-Dec-1997 RMK	Fixed definitions to reduce warnings
+ *   21-Mar-1999 RMK	Renamed to memory.h
+ *		 RMK	Moved TASK_SIZE and PAGE_OFFSET here
+ */
+#ifndef __ASM_ARCH_MEMORY_H
+#define __ASM_ARCH_MEMORY_H
+
+/*
+ * Physical DRAM offset.
+ */
+#define PHYS_OFFSET	UL(0x00000000)
+
+/*
+ * We keep this 1:1 so that we don't interfere
+ * with the PCMCIA memory regions
+ */
+#define __virt_to_bus(x)	(x)
+#define __bus_to_virt(x)	(x)
+
+/*
+ * Cache flushing area - SRAM
+ */
+#define FLUSH_BASE_PHYS		0x40000000
+#define FLUSH_BASE		0xdf000000
+
+#endif
diff --git a/arch/arm/mach-ebsa110/include/mach/system.h b/arch/arm/mach-ebsa110/include/mach/system.h
new file mode 100644
index 000000000000..350a028997ef
--- /dev/null
+++ b/arch/arm/mach-ebsa110/include/mach/system.h
@@ -0,0 +1,39 @@
+/*
+ *  arch/arm/mach-ebsa110/include/mach/system.h
+ *
+ *  Copyright (C) 1996-2000 Russell King.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __ASM_ARCH_SYSTEM_H
+#define __ASM_ARCH_SYSTEM_H
+
+/*
+ * EBSA110 idling methodology:
+ *
+ * We can not execute the "wait for interrupt" instruction since that
+ * will stop our MCLK signal (which provides the clock for the glue
+ * logic, and therefore the timer interrupt).
+ *
+ * Instead, we spin, polling the IRQ_STAT register for the occurrence
+ * of any interrupt with core clock down to the memory clock.
+ */
+static inline void arch_idle(void)
+{
+	const char *irq_stat = (char *)0xff000000;
+
+	/* disable clock switching */
+	asm volatile ("mcr p15, 0, ip, c15, c2, 2" : : : "cc");
+
+	/* wait for an interrupt to occur */
+	while (!*irq_stat);
+
+	/* enable clock switching */
+	asm volatile ("mcr p15, 0, ip, c15, c1, 2" : : : "cc");
+}
+
+#define arch_reset(mode)	cpu_reset(0x80000000)
+
+#endif
diff --git a/arch/arm/mach-ebsa110/include/mach/timex.h b/arch/arm/mach-ebsa110/include/mach/timex.h
new file mode 100644
index 000000000000..4fb43b22a102
--- /dev/null
+++ b/arch/arm/mach-ebsa110/include/mach/timex.h
@@ -0,0 +1,19 @@
+/*
+ *  arch/arm/mach-ebsa110/include/mach/timex.h
+ *
+ *  Copyright (C) 1997, 1998 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ *  EBSA110 architecture timex specifications
+ */
+
+/*
+ * On the EBSA, the clock ticks at weird rates.
+ * This is therefore not used to calculate the
+ * divisor.
+ */
+#define CLOCK_TICK_RATE		47894000
+
diff --git a/arch/arm/mach-ebsa110/include/mach/uncompress.h b/arch/arm/mach-ebsa110/include/mach/uncompress.h
new file mode 100644
index 000000000000..32041509fbf8
--- /dev/null
+++ b/arch/arm/mach-ebsa110/include/mach/uncompress.h
@@ -0,0 +1,45 @@
+/*
+ *  arch/arm/mach-ebsa110/include/mach/uncompress.h
+ *
+ *  Copyright (C) 1996,1997,1998 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/serial_reg.h>
+
+#define SERIAL_BASE	((unsigned char *)0xf0000be0)
+
+/*
+ * This does not append a newline
+ */
+static inline void putc(int c)
+{
+	unsigned char v, *base = SERIAL_BASE;
+
+	do {
+		v = base[UART_LSR << 2];
+		barrier();
+	} while (!(v & UART_LSR_THRE));
+
+	base[UART_TX << 2] = c;
+}
+
+static inline void flush(void)
+{
+	unsigned char v, *base = SERIAL_BASE;
+
+	do {
+		v = base[UART_LSR << 2];
+		barrier();
+	} while ((v & (UART_LSR_TEMT|UART_LSR_THRE)) !=
+		 (UART_LSR_TEMT|UART_LSR_THRE));
+}
+
+/*
+ * nothing to do
+ */
+#define arch_decomp_setup()
+#define arch_decomp_wdog()
diff --git a/arch/arm/mach-ebsa110/include/mach/vmalloc.h b/arch/arm/mach-ebsa110/include/mach/vmalloc.h
new file mode 100644
index 000000000000..9b44c19e95ec
--- /dev/null
+++ b/arch/arm/mach-ebsa110/include/mach/vmalloc.h
@@ -0,0 +1,10 @@
+/*
+ *  arch/arm/mach-ebsa110/include/mach/vmalloc.h
+ *
+ *  Copyright (C) 1998 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#define VMALLOC_END       (PAGE_OFFSET + 0x1f000000)
diff --git a/arch/arm/mach-ebsa110/io.c b/arch/arm/mach-ebsa110/io.c
index 6b2380e153ef..53748f5462e9 100644
--- a/arch/arm/mach-ebsa110/io.c
+++ b/arch/arm/mach-ebsa110/io.c
@@ -24,7 +24,7 @@
 #include <linux/kernel.h>
 #include <linux/types.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 #include <asm/page.h>
 
diff --git a/arch/arm/mach-ebsa110/leds.c b/arch/arm/mach-ebsa110/leds.c
index 3bc8c5e708e6..6a6ea57c2a4e 100644
--- a/arch/arm/mach-ebsa110/leds.c
+++ b/arch/arm/mach-ebsa110/leds.c
@@ -15,7 +15,7 @@
 #include <linux/spinlock.h>
 #include <linux/init.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/leds.h>
 #include <asm/system.h>
 #include <asm/mach-types.h>
diff --git a/arch/arm/mach-ep93xx/adssphere.c b/arch/arm/mach-ep93xx/adssphere.c
index ac5d5818eb7b..aa1fb352fb8f 100644
--- a/arch/arm/mach-ep93xx/adssphere.c
+++ b/arch/arm/mach-ep93xx/adssphere.c
@@ -19,7 +19,7 @@
 #include <linux/mtd/physmap.h>
 #include <linux/platform_device.h>
 #include <asm/io.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 
diff --git a/arch/arm/mach-ep93xx/clock.c b/arch/arm/mach-ep93xx/clock.c
index f62c35500bb7..6062e47f2043 100644
--- a/arch/arm/mach-ep93xx/clock.c
+++ b/arch/arm/mach-ep93xx/clock.c
@@ -16,7 +16,7 @@
 #include <linux/module.h>
 #include <linux/string.h>
 #include <asm/div64.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 
 struct clk {
diff --git a/arch/arm/mach-ep93xx/core.c b/arch/arm/mach-ep93xx/core.c
index 1d7bca6aa441..f99f43669392 100644
--- a/arch/arm/mach-ep93xx/core.c
+++ b/arch/arm/mach-ep93xx/core.c
@@ -36,7 +36,7 @@
 #include <asm/types.h>
 #include <asm/setup.h>
 #include <asm/memory.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/irq.h>
 #include <asm/system.h>
 #include <asm/tlbflush.h>
@@ -46,7 +46,7 @@
 #include <asm/mach/map.h>
 #include <asm/mach/time.h>
 #include <asm/mach/irq.h>
-#include <asm/arch/gpio.h>
+#include <mach/gpio.h>
 
 #include <asm/hardware/vic.h>
 
@@ -226,7 +226,7 @@ static void ep93xx_gpio_irq_ack(unsigned int irq)
 	int port = line >> 3;
 	int port_mask = 1 << (line & 7);
 
-	if ((irq_desc[irq].status & IRQ_TYPE_SENSE_MASK) == IRQT_BOTHEDGE) {
+	if ((irq_desc[irq].status & IRQ_TYPE_SENSE_MASK) == IRQ_TYPE_EDGE_BOTH) {
 		gpio_int_type2[port] ^= port_mask; /* switch edge direction */
 		ep93xx_gpio_update_int_params(port);
 	}
@@ -240,7 +240,7 @@ static void ep93xx_gpio_irq_mask_ack(unsigned int irq)
 	int port = line >> 3;
 	int port_mask = 1 << (line & 7);
 
-	if ((irq_desc[irq].status & IRQ_TYPE_SENSE_MASK) == IRQT_BOTHEDGE)
+	if ((irq_desc[irq].status & IRQ_TYPE_SENSE_MASK) == IRQ_TYPE_EDGE_BOTH)
 		gpio_int_type2[port] ^= port_mask; /* switch edge direction */
 
 	gpio_int_unmasked[port] &= ~port_mask;
@@ -283,27 +283,27 @@ static int ep93xx_gpio_irq_type(unsigned int irq, unsigned int type)
 	gpio_direction_input(gpio);
 
 	switch (type) {
-	case IRQT_RISING:
+	case IRQ_TYPE_EDGE_RISING:
 		gpio_int_type1[port] |= port_mask;
 		gpio_int_type2[port] |= port_mask;
 		desc->handle_irq = handle_edge_irq;
 		break;
-	case IRQT_FALLING:
+	case IRQ_TYPE_EDGE_FALLING:
 		gpio_int_type1[port] |= port_mask;
 		gpio_int_type2[port] &= ~port_mask;
 		desc->handle_irq = handle_edge_irq;
 		break;
-	case IRQT_HIGH:
+	case IRQ_TYPE_LEVEL_HIGH:
 		gpio_int_type1[port] &= ~port_mask;
 		gpio_int_type2[port] |= port_mask;
 		desc->handle_irq = handle_level_irq;
 		break;
-	case IRQT_LOW:
+	case IRQ_TYPE_LEVEL_LOW:
 		gpio_int_type1[port] &= ~port_mask;
 		gpio_int_type2[port] &= ~port_mask;
 		desc->handle_irq = handle_level_irq;
 		break;
-	case IRQT_BOTHEDGE:
+	case IRQ_TYPE_EDGE_BOTH:
 		gpio_int_type1[port] |= port_mask;
 		/* set initial polarity based on current input level */
 		if (gpio_get_value(gpio))
diff --git a/arch/arm/mach-ep93xx/edb9302.c b/arch/arm/mach-ep93xx/edb9302.c
index 0315615b74da..97550c0ad7b0 100644
--- a/arch/arm/mach-ep93xx/edb9302.c
+++ b/arch/arm/mach-ep93xx/edb9302.c
@@ -19,7 +19,7 @@
 #include <linux/mtd/physmap.h>
 #include <linux/platform_device.h>
 #include <asm/io.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 
diff --git a/arch/arm/mach-ep93xx/edb9302a.c b/arch/arm/mach-ep93xx/edb9302a.c
index 62e064bab1d2..99b01d44bf1c 100644
--- a/arch/arm/mach-ep93xx/edb9302a.c
+++ b/arch/arm/mach-ep93xx/edb9302a.c
@@ -19,7 +19,7 @@
 #include <linux/mtd/physmap.h>
 #include <linux/platform_device.h>
 #include <asm/io.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 
diff --git a/arch/arm/mach-ep93xx/edb9307.c b/arch/arm/mach-ep93xx/edb9307.c
index d6a5698da91f..9fb72d01a36c 100644
--- a/arch/arm/mach-ep93xx/edb9307.c
+++ b/arch/arm/mach-ep93xx/edb9307.c
@@ -19,7 +19,7 @@
 #include <linux/mtd/physmap.h>
 #include <linux/platform_device.h>
 #include <asm/io.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 
diff --git a/arch/arm/mach-ep93xx/edb9312.c b/arch/arm/mach-ep93xx/edb9312.c
index e310e4d72990..87267a574f5e 100644
--- a/arch/arm/mach-ep93xx/edb9312.c
+++ b/arch/arm/mach-ep93xx/edb9312.c
@@ -20,7 +20,7 @@
 #include <linux/mtd/physmap.h>
 #include <linux/platform_device.h>
 #include <asm/io.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 
diff --git a/arch/arm/mach-ep93xx/edb9315.c b/arch/arm/mach-ep93xx/edb9315.c
index 249ca9e57bc6..7e373950be4d 100644
--- a/arch/arm/mach-ep93xx/edb9315.c
+++ b/arch/arm/mach-ep93xx/edb9315.c
@@ -19,7 +19,7 @@
 #include <linux/mtd/physmap.h>
 #include <linux/platform_device.h>
 #include <asm/io.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 
diff --git a/arch/arm/mach-ep93xx/edb9315a.c b/arch/arm/mach-ep93xx/edb9315a.c
index 7ca0e6170a41..08a7c9bfb689 100644
--- a/arch/arm/mach-ep93xx/edb9315a.c
+++ b/arch/arm/mach-ep93xx/edb9315a.c
@@ -19,7 +19,7 @@
 #include <linux/mtd/physmap.h>
 #include <linux/platform_device.h>
 #include <asm/io.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 
diff --git a/arch/arm/mach-ep93xx/gesbc9312.c b/arch/arm/mach-ep93xx/gesbc9312.c
index 694590a451c1..9b41ec1f089e 100644
--- a/arch/arm/mach-ep93xx/gesbc9312.c
+++ b/arch/arm/mach-ep93xx/gesbc9312.c
@@ -19,7 +19,7 @@
 #include <linux/mtd/physmap.h>
 #include <linux/platform_device.h>
 #include <asm/io.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 
diff --git a/arch/arm/mach-ep93xx/gpio.c b/arch/arm/mach-ep93xx/gpio.c
index dc2e4c00d989..0f3fb87ca4be 100644
--- a/arch/arm/mach-ep93xx/gpio.c
+++ b/arch/arm/mach-ep93xx/gpio.c
@@ -17,7 +17,7 @@
 #include <linux/module.h>
 #include <linux/seq_file.h>
 
-#include <asm/arch/ep93xx-regs.h>
+#include <mach/ep93xx-regs.h>
 #include <asm/io.h>
 #include <asm/gpio.h>
 
diff --git a/arch/arm/mach-ep93xx/include/mach/debug-macro.S b/arch/arm/mach-ep93xx/include/mach/debug-macro.S
new file mode 100644
index 000000000000..802858bc8095
--- /dev/null
+++ b/arch/arm/mach-ep93xx/include/mach/debug-macro.S
@@ -0,0 +1,22 @@
+/*
+ * arch/arm/mach-ep93xx/include/mach/debug-macro.S
+ * Debugging macro include header
+ *
+ * Copyright (C) 2006 Lennert Buytenhek <buytenh@wantstofly.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or (at
+ * your option) any later version.
+ */
+#include <mach/ep93xx-regs.h>
+
+		.macro	addruart,rx
+		mrc	p15, 0, \rx, c1, c0
+		tst	\rx, #1				@ MMU enabled?
+		ldreq	\rx, =EP93XX_APB_PHYS_BASE	@ Physical base
+		ldrne	\rx, =EP93XX_APB_VIRT_BASE	@ virtual base
+		orr	\rx, \rx, #0x000c0000
+		.endm
+
+#include <asm/hardware/debug-pl01x.S>
diff --git a/arch/arm/mach-ep93xx/include/mach/dma.h b/arch/arm/mach-ep93xx/include/mach/dma.h
new file mode 100644
index 000000000000..d0fa9656e92f
--- /dev/null
+++ b/arch/arm/mach-ep93xx/include/mach/dma.h
@@ -0,0 +1,3 @@
+/*
+ * arch/arm/mach-ep93xx/include/mach/dma.h
+ */
diff --git a/arch/arm/mach-ep93xx/include/mach/entry-macro.S b/arch/arm/mach-ep93xx/include/mach/entry-macro.S
new file mode 100644
index 000000000000..96b85e2c2c0b
--- /dev/null
+++ b/arch/arm/mach-ep93xx/include/mach/entry-macro.S
@@ -0,0 +1,59 @@
+/*
+ * arch/arm/mach-ep93xx/include/mach/entry-macro.S
+ * IRQ demultiplexing for EP93xx
+ *
+ * Copyright (C) 2006 Lennert Buytenhek <buytenh@wantstofly.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or (at
+ * your option) any later version.
+ */
+#include <mach/ep93xx-regs.h>
+
+		.macro	disable_fiq
+		.endm
+
+		.macro  get_irqnr_preamble, base, tmp
+		.endm
+
+		.macro  arch_ret_to_user, tmp1, tmp2
+		.endm
+
+		.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
+		ldr	\base, =(EP93XX_AHB_VIRT_BASE)
+		orr	\base, \base, #0x000b0000
+		mov	\irqnr, #0
+		ldr	\irqstat, [\base]		@ lower 32 interrupts
+		cmp	\irqstat, #0
+		bne	1001f
+
+		eor	\base, \base, #0x00070000
+		ldr	\irqstat, [\base]		@ upper 32 interrupts
+		cmp	\irqstat, #0
+		beq	1002f
+		mov	\irqnr, #0x20
+
+1001:
+		movs	\tmp, \irqstat, lsl #16
+		movne	\irqstat, \tmp
+		addeq	\irqnr, \irqnr, #16
+
+		movs	\tmp, \irqstat, lsl #8
+		movne	\irqstat, \tmp
+		addeq	\irqnr, \irqnr, #8
+
+		movs	\tmp, \irqstat, lsl #4
+		movne	\irqstat, \tmp
+		addeq	\irqnr, \irqnr, #4
+
+		movs	\tmp, \irqstat, lsl #2
+		movne	\irqstat, \tmp
+		addeq	\irqnr, \irqnr, #2
+
+		movs	\tmp, \irqstat, lsl #1
+		addeq	\irqnr, \irqnr, #1
+		orrs	\base, \base, #1
+
+1002:
+		.endm
diff --git a/include/asm-arm/arch-ep93xx/ep93xx-regs.h b/arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h
index 625c6f0abc03..9f4458c8e070 100644
--- a/include/asm-arm/arch-ep93xx/ep93xx-regs.h
+++ b/arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h
@@ -1,5 +1,5 @@
 /*
- * linux/include/asm-arm/arch-ep93xx/ep93xx-regs.h
+ * arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h
  */
 
 #ifndef __ASM_ARCH_EP93XX_REGS_H
diff --git a/arch/arm/mach-ep93xx/include/mach/gesbc9312.h b/arch/arm/mach-ep93xx/include/mach/gesbc9312.h
new file mode 100644
index 000000000000..21fe2b922aa5
--- /dev/null
+++ b/arch/arm/mach-ep93xx/include/mach/gesbc9312.h
@@ -0,0 +1,3 @@
+/*
+ * arch/arm/mach-ep93xx/include/mach/gesbc9312.h
+ */
diff --git a/arch/arm/mach-ep93xx/include/mach/gpio.h b/arch/arm/mach-ep93xx/include/mach/gpio.h
new file mode 100644
index 000000000000..f7020414c5df
--- /dev/null
+++ b/arch/arm/mach-ep93xx/include/mach/gpio.h
@@ -0,0 +1,128 @@
+/*
+ * arch/arm/mach-ep93xx/include/mach/gpio.h
+ */
+
+#ifndef __ASM_ARCH_GPIO_H
+#define __ASM_ARCH_GPIO_H
+
+/* GPIO port A.  */
+#define EP93XX_GPIO_LINE_A(x)		((x) + 0)
+#define EP93XX_GPIO_LINE_EGPIO0		EP93XX_GPIO_LINE_A(0)
+#define EP93XX_GPIO_LINE_EGPIO1		EP93XX_GPIO_LINE_A(1)
+#define EP93XX_GPIO_LINE_EGPIO2		EP93XX_GPIO_LINE_A(2)
+#define EP93XX_GPIO_LINE_EGPIO3		EP93XX_GPIO_LINE_A(3)
+#define EP93XX_GPIO_LINE_EGPIO4		EP93XX_GPIO_LINE_A(4)
+#define EP93XX_GPIO_LINE_EGPIO5		EP93XX_GPIO_LINE_A(5)
+#define EP93XX_GPIO_LINE_EGPIO6		EP93XX_GPIO_LINE_A(6)
+#define EP93XX_GPIO_LINE_EGPIO7		EP93XX_GPIO_LINE_A(7)
+
+/* GPIO port B.  */
+#define EP93XX_GPIO_LINE_B(x)		((x) + 8)
+#define EP93XX_GPIO_LINE_EGPIO8		EP93XX_GPIO_LINE_B(0)
+#define EP93XX_GPIO_LINE_EGPIO9		EP93XX_GPIO_LINE_B(1)
+#define EP93XX_GPIO_LINE_EGPIO10	EP93XX_GPIO_LINE_B(2)
+#define EP93XX_GPIO_LINE_EGPIO11	EP93XX_GPIO_LINE_B(3)
+#define EP93XX_GPIO_LINE_EGPIO12	EP93XX_GPIO_LINE_B(4)
+#define EP93XX_GPIO_LINE_EGPIO13	EP93XX_GPIO_LINE_B(5)
+#define EP93XX_GPIO_LINE_EGPIO14	EP93XX_GPIO_LINE_B(6)
+#define EP93XX_GPIO_LINE_EGPIO15	EP93XX_GPIO_LINE_B(7)
+
+/* GPIO port C.  */
+#define EP93XX_GPIO_LINE_C(x)		((x) + 40)
+#define EP93XX_GPIO_LINE_ROW0		EP93XX_GPIO_LINE_C(0)
+#define EP93XX_GPIO_LINE_ROW1		EP93XX_GPIO_LINE_C(1)
+#define EP93XX_GPIO_LINE_ROW2		EP93XX_GPIO_LINE_C(2)
+#define EP93XX_GPIO_LINE_ROW3		EP93XX_GPIO_LINE_C(3)
+#define EP93XX_GPIO_LINE_ROW4		EP93XX_GPIO_LINE_C(4)
+#define EP93XX_GPIO_LINE_ROW5		EP93XX_GPIO_LINE_C(5)
+#define EP93XX_GPIO_LINE_ROW6		EP93XX_GPIO_LINE_C(6)
+#define EP93XX_GPIO_LINE_ROW7		EP93XX_GPIO_LINE_C(7)
+
+/* GPIO port D.  */
+#define EP93XX_GPIO_LINE_D(x)		((x) + 24)
+#define EP93XX_GPIO_LINE_COL0		EP93XX_GPIO_LINE_D(0)
+#define EP93XX_GPIO_LINE_COL1		EP93XX_GPIO_LINE_D(1)
+#define EP93XX_GPIO_LINE_COL2		EP93XX_GPIO_LINE_D(2)
+#define EP93XX_GPIO_LINE_COL3		EP93XX_GPIO_LINE_D(3)
+#define EP93XX_GPIO_LINE_COL4		EP93XX_GPIO_LINE_D(4)
+#define EP93XX_GPIO_LINE_COL5		EP93XX_GPIO_LINE_D(5)
+#define EP93XX_GPIO_LINE_COL6		EP93XX_GPIO_LINE_D(6)
+#define EP93XX_GPIO_LINE_COL7		EP93XX_GPIO_LINE_D(7)
+
+/* GPIO port E.  */
+#define EP93XX_GPIO_LINE_E(x)		((x) + 32)
+#define EP93XX_GPIO_LINE_GRLED		EP93XX_GPIO_LINE_E(0)
+#define EP93XX_GPIO_LINE_RDLED		EP93XX_GPIO_LINE_E(1)
+#define EP93XX_GPIO_LINE_DIORn		EP93XX_GPIO_LINE_E(2)
+#define EP93XX_GPIO_LINE_IDECS1n	EP93XX_GPIO_LINE_E(3)
+#define EP93XX_GPIO_LINE_IDECS2n	EP93XX_GPIO_LINE_E(4)
+#define EP93XX_GPIO_LINE_IDEDA0		EP93XX_GPIO_LINE_E(5)
+#define EP93XX_GPIO_LINE_IDEDA1		EP93XX_GPIO_LINE_E(6)
+#define EP93XX_GPIO_LINE_IDEDA2		EP93XX_GPIO_LINE_E(7)
+
+/* GPIO port F.  */
+#define EP93XX_GPIO_LINE_F(x)		((x) + 16)
+#define EP93XX_GPIO_LINE_WP		EP93XX_GPIO_LINE_F(0)
+#define EP93XX_GPIO_LINE_MCCD1		EP93XX_GPIO_LINE_F(1)
+#define EP93XX_GPIO_LINE_MCCD2		EP93XX_GPIO_LINE_F(2)
+#define EP93XX_GPIO_LINE_MCBVD1		EP93XX_GPIO_LINE_F(3)
+#define EP93XX_GPIO_LINE_MCBVD2		EP93XX_GPIO_LINE_F(4)
+#define EP93XX_GPIO_LINE_VS1		EP93XX_GPIO_LINE_F(5)
+#define EP93XX_GPIO_LINE_READY		EP93XX_GPIO_LINE_F(6)
+#define EP93XX_GPIO_LINE_VS2		EP93XX_GPIO_LINE_F(7)
+
+/* GPIO port G.  */
+#define EP93XX_GPIO_LINE_G(x)		((x) + 48)
+#define EP93XX_GPIO_LINE_EECLK		EP93XX_GPIO_LINE_G(0)
+#define EP93XX_GPIO_LINE_EEDAT		EP93XX_GPIO_LINE_G(1)
+#define EP93XX_GPIO_LINE_SLA0		EP93XX_GPIO_LINE_G(2)
+#define EP93XX_GPIO_LINE_SLA1		EP93XX_GPIO_LINE_G(3)
+#define EP93XX_GPIO_LINE_DD12		EP93XX_GPIO_LINE_G(4)
+#define EP93XX_GPIO_LINE_DD13		EP93XX_GPIO_LINE_G(5)
+#define EP93XX_GPIO_LINE_DD14		EP93XX_GPIO_LINE_G(6)
+#define EP93XX_GPIO_LINE_DD15		EP93XX_GPIO_LINE_G(7)
+
+/* GPIO port H.  */
+#define EP93XX_GPIO_LINE_H(x)		((x) + 56)
+#define EP93XX_GPIO_LINE_DD0		EP93XX_GPIO_LINE_H(0)
+#define EP93XX_GPIO_LINE_DD1		EP93XX_GPIO_LINE_H(1)
+#define EP93XX_GPIO_LINE_DD2		EP93XX_GPIO_LINE_H(2)
+#define EP93XX_GPIO_LINE_DD3		EP93XX_GPIO_LINE_H(3)
+#define EP93XX_GPIO_LINE_DD4		EP93XX_GPIO_LINE_H(4)
+#define EP93XX_GPIO_LINE_DD5		EP93XX_GPIO_LINE_H(5)
+#define EP93XX_GPIO_LINE_DD6		EP93XX_GPIO_LINE_H(6)
+#define EP93XX_GPIO_LINE_DD7		EP93XX_GPIO_LINE_H(7)
+
+/* maximum value for gpio line identifiers */
+#define EP93XX_GPIO_LINE_MAX		EP93XX_GPIO_LINE_H(7)
+
+/* maximum value for irq capable line identifiers */
+#define EP93XX_GPIO_LINE_MAX_IRQ	EP93XX_GPIO_LINE_F(7)
+
+/* new generic GPIO API - see Documentation/gpio.txt */
+
+#include <asm-generic/gpio.h>
+
+#define gpio_get_value	__gpio_get_value
+#define gpio_set_value	__gpio_set_value
+#define gpio_cansleep	__gpio_cansleep
+
+/*
+ * Map GPIO A0..A7  (0..7)  to irq 64..71,
+ *          B0..B7  (7..15) to irq 72..79, and
+ *          F0..F7 (16..24) to irq 80..87.
+ */
+static inline int gpio_to_irq(unsigned gpio)
+{
+	if (gpio <= EP93XX_GPIO_LINE_MAX_IRQ)
+		return 64 + gpio;
+
+	return -EINVAL;
+}
+
+static inline int irq_to_gpio(unsigned irq)
+{
+	return irq - gpio_to_irq(0);
+}
+
+#endif
diff --git a/arch/arm/mach-ep93xx/include/mach/hardware.h b/arch/arm/mach-ep93xx/include/mach/hardware.h
new file mode 100644
index 000000000000..529807d182bf
--- /dev/null
+++ b/arch/arm/mach-ep93xx/include/mach/hardware.h
@@ -0,0 +1,16 @@
+/*
+ * arch/arm/mach-ep93xx/include/mach/hardware.h
+ */
+#ifndef __ASM_ARCH_HARDWARE_H
+#define __ASM_ARCH_HARDWARE_H
+
+#include "ep93xx-regs.h"
+
+#define pcibios_assign_all_busses()	0
+
+#include "platform.h"
+
+#include "gesbc9312.h"
+#include "ts72xx.h"
+
+#endif
diff --git a/arch/arm/mach-ep93xx/include/mach/io.h b/arch/arm/mach-ep93xx/include/mach/io.h
new file mode 100644
index 000000000000..1ab9a90ad339
--- /dev/null
+++ b/arch/arm/mach-ep93xx/include/mach/io.h
@@ -0,0 +1,8 @@
+/*
+ * arch/arm/mach-ep93xx/include/mach/io.h
+ */
+
+#define IO_SPACE_LIMIT		0xffffffff
+
+#define __io(p)			((void __iomem *)(p))
+#define __mem_pci(p)		(p)
diff --git a/arch/arm/mach-ep93xx/include/mach/irqs.h b/arch/arm/mach-ep93xx/include/mach/irqs.h
new file mode 100644
index 000000000000..ff98390bbf0f
--- /dev/null
+++ b/arch/arm/mach-ep93xx/include/mach/irqs.h
@@ -0,0 +1,78 @@
+/*
+ * arch/arm/mach-ep93xx/include/mach/irqs.h
+ */
+
+#ifndef __ASM_ARCH_IRQS_H
+#define __ASM_ARCH_IRQS_H
+
+#define IRQ_EP93XX_COMMRX		2
+#define IRQ_EP93XX_COMMTX		3
+#define IRQ_EP93XX_TIMER1		4
+#define IRQ_EP93XX_TIMER2		5
+#define IRQ_EP93XX_AACINTR		6
+#define IRQ_EP93XX_DMAM2P0		7
+#define IRQ_EP93XX_DMAM2P1		8
+#define IRQ_EP93XX_DMAM2P2		9
+#define IRQ_EP93XX_DMAM2P3		10
+#define IRQ_EP93XX_DMAM2P4		11
+#define IRQ_EP93XX_DMAM2P5		12
+#define IRQ_EP93XX_DMAM2P6		13
+#define IRQ_EP93XX_DMAM2P7		14
+#define IRQ_EP93XX_DMAM2P8		15
+#define IRQ_EP93XX_DMAM2P9		16
+#define IRQ_EP93XX_DMAM2M0		17
+#define IRQ_EP93XX_DMAM2M1		18
+#define IRQ_EP93XX_GPIO0MUX		19
+#define IRQ_EP93XX_GPIO1MUX		20
+#define IRQ_EP93XX_GPIO2MUX		21
+#define IRQ_EP93XX_GPIO3MUX		22
+#define IRQ_EP93XX_UART1RX		23
+#define IRQ_EP93XX_UART1TX		24
+#define IRQ_EP93XX_UART2RX		25
+#define IRQ_EP93XX_UART2TX		26
+#define IRQ_EP93XX_UART3RX		27
+#define IRQ_EP93XX_UART3TX		28
+#define IRQ_EP93XX_KEY			29
+#define IRQ_EP93XX_TOUCH		30
+#define EP93XX_VIC1_VALID_IRQ_MASK	0x7ffffffc
+
+#define IRQ_EP93XX_EXT0			32
+#define IRQ_EP93XX_EXT1			33
+#define IRQ_EP93XX_EXT2			34
+#define IRQ_EP93XX_64HZ			35
+#define IRQ_EP93XX_WATCHDOG		36
+#define IRQ_EP93XX_RTC			37
+#define IRQ_EP93XX_IRDA			38
+#define IRQ_EP93XX_ETHERNET		39
+#define IRQ_EP93XX_EXT3			40
+#define IRQ_EP93XX_PROG			41
+#define IRQ_EP93XX_1HZ			42
+#define IRQ_EP93XX_VSYNC		43
+#define IRQ_EP93XX_VIDEO_FIFO		44
+#define IRQ_EP93XX_SSP1RX		45
+#define IRQ_EP93XX_SSP1TX		46
+#define IRQ_EP93XX_GPIO4MUX		47
+#define IRQ_EP93XX_GPIO5MUX		48
+#define IRQ_EP93XX_GPIO6MUX		49
+#define IRQ_EP93XX_GPIO7MUX		50
+#define IRQ_EP93XX_TIMER3		51
+#define IRQ_EP93XX_UART1		52
+#define IRQ_EP93XX_SSP			53
+#define IRQ_EP93XX_UART2		54
+#define IRQ_EP93XX_UART3		55
+#define IRQ_EP93XX_USB			56
+#define IRQ_EP93XX_ETHERNET_PME		57
+#define IRQ_EP93XX_DSP			58
+#define IRQ_EP93XX_GPIO_AB		59
+#define IRQ_EP93XX_SAI			60
+#define EP93XX_VIC2_VALID_IRQ_MASK	0x1fffffff
+
+#define NR_EP93XX_IRQS			(64 + 24)
+
+#define EP93XX_BOARD_IRQ(x)		(NR_EP93XX_IRQS + (x))
+#define EP93XX_BOARD_IRQS		32
+
+#define NR_IRQS				(NR_EP93XX_IRQS + EP93XX_BOARD_IRQS)
+
+
+#endif
diff --git a/arch/arm/mach-ep93xx/include/mach/memory.h b/arch/arm/mach-ep93xx/include/mach/memory.h
new file mode 100644
index 000000000000..f1b633590752
--- /dev/null
+++ b/arch/arm/mach-ep93xx/include/mach/memory.h
@@ -0,0 +1,14 @@
+/*
+ * arch/arm/mach-ep93xx/include/mach/memory.h
+ */
+
+#ifndef __ASM_ARCH_MEMORY_H
+#define __ASM_ARCH_MEMORY_H
+
+#define PHYS_OFFSET		UL(0x00000000)
+
+#define __bus_to_virt(x)	__phys_to_virt(x)
+#define __virt_to_bus(x)	__virt_to_phys(x)
+
+
+#endif
diff --git a/arch/arm/mach-ep93xx/include/mach/platform.h b/arch/arm/mach-ep93xx/include/mach/platform.h
new file mode 100644
index 000000000000..b5c182473f5d
--- /dev/null
+++ b/arch/arm/mach-ep93xx/include/mach/platform.h
@@ -0,0 +1,20 @@
+/*
+ * arch/arm/mach-ep93xx/include/mach/platform.h
+ */
+
+#ifndef __ASSEMBLY__
+
+void ep93xx_map_io(void);
+void ep93xx_init_irq(void);
+void ep93xx_init_time(unsigned long);
+void ep93xx_init_devices(void);
+extern struct sys_timer ep93xx_timer;
+
+struct ep93xx_eth_data
+{
+	unsigned char	dev_addr[6];
+	unsigned char	phy_id;
+};
+
+
+#endif
diff --git a/arch/arm/mach-ep93xx/include/mach/system.h b/arch/arm/mach-ep93xx/include/mach/system.h
new file mode 100644
index 000000000000..67789d0f329e
--- /dev/null
+++ b/arch/arm/mach-ep93xx/include/mach/system.h
@@ -0,0 +1,26 @@
+/*
+ * arch/arm/mach-ep93xx/include/mach/system.h
+ */
+
+#include <mach/hardware.h>
+
+static inline void arch_idle(void)
+{
+	cpu_do_idle();
+}
+
+static inline void arch_reset(char mode)
+{
+	u32 devicecfg;
+
+	local_irq_disable();
+
+	devicecfg = __raw_readl(EP93XX_SYSCON_DEVICE_CONFIG);
+	__raw_writel(0xaa, EP93XX_SYSCON_SWLOCK);
+	__raw_writel(devicecfg | 0x80000000, EP93XX_SYSCON_DEVICE_CONFIG);
+	__raw_writel(0xaa, EP93XX_SYSCON_SWLOCK);
+	__raw_writel(devicecfg & ~0x80000000, EP93XX_SYSCON_DEVICE_CONFIG);
+
+	while (1)
+		;
+}
diff --git a/arch/arm/mach-ep93xx/include/mach/timex.h b/arch/arm/mach-ep93xx/include/mach/timex.h
new file mode 100644
index 000000000000..6b3503b01fa6
--- /dev/null
+++ b/arch/arm/mach-ep93xx/include/mach/timex.h
@@ -0,0 +1,5 @@
+/*
+ * arch/arm/mach-ep93xx/include/mach/timex.h
+ */
+
+#define CLOCK_TICK_RATE		983040
diff --git a/include/asm-arm/arch-ep93xx/ts72xx.h b/arch/arm/mach-ep93xx/include/mach/ts72xx.h
index a94f63ff0535..30b318aa1a1f 100644
--- a/include/asm-arm/arch-ep93xx/ts72xx.h
+++ b/arch/arm/mach-ep93xx/include/mach/ts72xx.h
@@ -1,5 +1,5 @@
 /*
- * linux/include/asm-arm/arch-ep93xx/ts72xx.h
+ * arch/arm/mach-ep93xx/include/mach/ts72xx.h
  */
 
 /*
diff --git a/arch/arm/mach-ep93xx/include/mach/uncompress.h b/arch/arm/mach-ep93xx/include/mach/uncompress.h
new file mode 100644
index 000000000000..1fd2f17de325
--- /dev/null
+++ b/arch/arm/mach-ep93xx/include/mach/uncompress.h
@@ -0,0 +1,85 @@
+/*
+ * arch/arm/mach-ep93xx/include/mach/uncompress.h
+ *
+ * Copyright (C) 2006 Lennert Buytenhek <buytenh@wantstofly.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or (at
+ * your option) any later version.
+ */
+
+#include <mach/ep93xx-regs.h>
+
+static unsigned char __raw_readb(unsigned int ptr)
+{
+	return *((volatile unsigned char *)ptr);
+}
+
+static unsigned int __raw_readl(unsigned int ptr)
+{
+	return *((volatile unsigned int *)ptr);
+}
+
+static void __raw_writeb(unsigned char value, unsigned int ptr)
+{
+	*((volatile unsigned char *)ptr) = value;
+}
+
+static void __raw_writel(unsigned int value, unsigned int ptr)
+{
+	*((volatile unsigned int *)ptr) = value;
+}
+
+
+#define PHYS_UART1_DATA		0x808c0000
+#define PHYS_UART1_FLAG		0x808c0018
+#define UART1_FLAG_TXFF		0x20
+
+static inline void putc(int c)
+{
+	int i;
+
+	for (i = 0; i < 1000; i++) {
+		/* Transmit fifo not full?  */
+		if (!(__raw_readb(PHYS_UART1_FLAG) & UART1_FLAG_TXFF))
+			break;
+	}
+
+	__raw_writeb(c, PHYS_UART1_DATA);
+}
+
+static inline void flush(void)
+{
+}
+
+
+/*
+ * Some bootloaders don't turn off DMA from the ethernet MAC before
+ * jumping to linux, which means that we might end up with bits of RX
+ * status and packet data scribbled over the uncompressed kernel image.
+ * Work around this by resetting the ethernet MAC before we uncompress.
+ */
+#define PHYS_ETH_SELF_CTL		0x80010020
+#define ETH_SELF_CTL_RESET		0x00000001
+
+static void ethernet_reset(void)
+{
+	unsigned int v;
+
+	/* Reset the ethernet MAC.  */
+	v = __raw_readl(PHYS_ETH_SELF_CTL);
+	__raw_writel(v | ETH_SELF_CTL_RESET, PHYS_ETH_SELF_CTL);
+
+	/* Wait for reset to finish.  */
+	while (__raw_readl(PHYS_ETH_SELF_CTL) & ETH_SELF_CTL_RESET)
+		;
+}
+
+
+static void arch_decomp_setup(void)
+{
+	ethernet_reset();
+}
+
+#define arch_decomp_wdog()
diff --git a/arch/arm/mach-ep93xx/include/mach/vmalloc.h b/arch/arm/mach-ep93xx/include/mach/vmalloc.h
new file mode 100644
index 000000000000..aed21cd3fe2d
--- /dev/null
+++ b/arch/arm/mach-ep93xx/include/mach/vmalloc.h
@@ -0,0 +1,5 @@
+/*
+ * arch/arm/mach-ep93xx/include/mach/vmalloc.h
+ */
+
+#define VMALLOC_END	0xfe800000
diff --git a/arch/arm/mach-ep93xx/micro9.c b/arch/arm/mach-ep93xx/micro9.c
index f28c1294cae1..de047a5c8112 100644
--- a/arch/arm/mach-ep93xx/micro9.c
+++ b/arch/arm/mach-ep93xx/micro9.c
@@ -20,7 +20,7 @@
 #include <linux/mtd/physmap.h>
 
 #include <asm/io.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 
 #include <asm/mach/arch.h>
 #include <asm/mach-types.h>
diff --git a/arch/arm/mach-ep93xx/ts72xx.c b/arch/arm/mach-ep93xx/ts72xx.c
index 3a4bf90ba832..c3cbff126d0c 100644
--- a/arch/arm/mach-ep93xx/ts72xx.c
+++ b/arch/arm/mach-ep93xx/ts72xx.c
@@ -20,7 +20,7 @@
 #include <linux/platform_device.h>
 #include <linux/m48t86.h>
 #include <asm/io.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
diff --git a/arch/arm/mach-footbridge/cats-pci.c b/arch/arm/mach-footbridge/cats-pci.c
index 35eb232a649a..ae3e1c8c7583 100644
--- a/arch/arm/mach-footbridge/cats-pci.c
+++ b/arch/arm/mach-footbridge/cats-pci.c
@@ -18,6 +18,9 @@ static int irqmap_cats[] __initdata = { IRQ_PCI, IRQ_IN0, IRQ_IN1, IRQ_IN3 };
 
 static int __init cats_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
 {
+	if (dev->irq >= 255)
+		return -1;	/* not a valid interrupt. */
+
 	if (dev->irq >= 128)
 		return dev->irq & 0x1f;
 
diff --git a/arch/arm/mach-footbridge/ebsa285-leds.c b/arch/arm/mach-footbridge/ebsa285-leds.c
index 09c1fbc51876..4e10090cd87f 100644
--- a/arch/arm/mach-footbridge/ebsa285-leds.c
+++ b/arch/arm/mach-footbridge/ebsa285-leds.c
@@ -21,7 +21,7 @@
 #include <linux/init.h>
 #include <linux/spinlock.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/leds.h>
 #include <asm/mach-types.h>
 #include <asm/system.h>
diff --git a/arch/arm/mach-footbridge/include/mach/debug-macro.S b/arch/arm/mach-footbridge/include/mach/debug-macro.S
new file mode 100644
index 000000000000..4329b8123570
--- /dev/null
+++ b/arch/arm/mach-footbridge/include/mach/debug-macro.S
@@ -0,0 +1,57 @@
+/* arch/arm/mach-footbridge/include/mach/debug-macro.S
+ *
+ * Debugging macro include header
+ *
+ *  Copyright (C) 1994-1999 Russell King
+ *  Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+*/
+
+#include <asm/hardware/dec21285.h>
+
+#ifndef CONFIG_DEBUG_DC21285_PORT
+	/* For NetWinder debugging */
+		.macro	addruart,rx
+		mrc	p15, 0, \rx, c1, c0
+		tst	\rx, #1			@ MMU enabled?
+		moveq	\rx, #0x7c000000	@ physical
+		movne	\rx, #0xff000000	@ virtual
+		orr	\rx, \rx, #0x000003f8
+		.endm
+
+#define UART_SHIFT	0
+#define FLOW_CONTROL
+#include <asm/hardware/debug-8250.S>
+
+#else
+	/* For EBSA285 debugging */
+		.equ	dc21285_high, ARMCSR_BASE & 0xff000000
+		.equ	dc21285_low,  ARMCSR_BASE & 0x00ffffff
+
+		.macro	addruart,rx
+		mrc	p15, 0, \rx, c1, c0
+		tst	\rx, #1			@ MMU enabled?
+		moveq	\rx, #0x42000000
+		movne	\rx, #dc21285_high
+		.if	dc21285_low
+		orrne	\rx, \rx, #dc21285_low
+		.endif
+		.endm
+
+		.macro	senduart,rd,rx
+		str	\rd, [\rx, #0x160]	@ UARTDR
+		.endm
+
+		.macro	busyuart,rd,rx
+1001:		ldr	\rd, [\rx, #0x178]	@ UARTFLG
+		tst	\rd, #1 << 3
+		bne	1001b
+		.endm
+
+		.macro	waituart,rd,rx
+		.endm
+#endif
diff --git a/arch/arm/mach-footbridge/include/mach/dma.h b/arch/arm/mach-footbridge/include/mach/dma.h
new file mode 100644
index 000000000000..62afd213effb
--- /dev/null
+++ b/arch/arm/mach-footbridge/include/mach/dma.h
@@ -0,0 +1,25 @@
+/*
+ *  arch/arm/mach-footbridge/include/mach/dma.h
+ *
+ *  Architecture DMA routines
+ *
+ *  Copyright (C) 1998,1999 Russell King
+ *  Copyright (C) 1998,1999 Philip Blundell
+ */
+#ifndef __ASM_ARCH_DMA_H
+#define __ASM_ARCH_DMA_H
+
+/*
+ * The 21285 has two internal DMA channels; we call these 8 and 9.
+ * On CATS hardware we have an additional eight ISA dma channels
+ * numbered 0..7.
+ */
+#define _ISA_DMA(x)		(0+(x))
+#define _DC21285_DMA(x)		(8+(x))
+
+#define MAX_DMA_CHANNELS	10
+
+#define DMA_FLOPPY		_ISA_DMA(2)
+#define DMA_ISA_CASCADE		_ISA_DMA(4)
+
+#endif /* _ASM_ARCH_DMA_H */
diff --git a/arch/arm/mach-footbridge/include/mach/entry-macro.S b/arch/arm/mach-footbridge/include/mach/entry-macro.S
new file mode 100644
index 000000000000..d3847be0c667
--- /dev/null
+++ b/arch/arm/mach-footbridge/include/mach/entry-macro.S
@@ -0,0 +1,113 @@
+/*
+ * arch/arm/mach-footbridge/include/mach/entry-macro.S
+ *
+ * Low-level IRQ helper macros for footbridge-based platforms
+ *
+ * This file is licensed under  the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+#include <mach/hardware.h>
+#include <mach/irqs.h>
+#include <asm/hardware/dec21285.h>
+
+		.equ	dc21285_high, ARMCSR_BASE & 0xff000000
+		.equ	dc21285_low, ARMCSR_BASE & 0x00ffffff
+
+		.macro	disable_fiq
+		.endm
+
+		.macro  get_irqnr_preamble, base, tmp
+		mov	\base, #dc21285_high
+		.if	dc21285_low
+		orr	\base, \base, #dc21285_low
+		.endif
+		.endm
+
+		.macro  arch_ret_to_user, tmp1, tmp2
+		.endm
+
+		.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
+		ldr	\irqstat, [\base, #0x180]	@ get interrupts
+
+		mov	\irqnr, #IRQ_SDRAMPARITY
+		tst	\irqstat, #IRQ_MASK_SDRAMPARITY
+		bne	1001f
+
+		tst	\irqstat, #IRQ_MASK_UART_RX
+		movne	\irqnr, #IRQ_CONRX
+		bne	1001f
+
+		tst	\irqstat, #IRQ_MASK_DMA1
+		movne	\irqnr, #IRQ_DMA1
+		bne	1001f
+
+		tst	\irqstat, #IRQ_MASK_DMA2
+		movne	\irqnr, #IRQ_DMA2
+		bne	1001f
+
+		tst	\irqstat, #IRQ_MASK_IN0
+		movne	\irqnr, #IRQ_IN0
+		bne	1001f
+
+		tst	\irqstat, #IRQ_MASK_IN1
+		movne	\irqnr, #IRQ_IN1
+		bne	1001f
+
+		tst	\irqstat, #IRQ_MASK_IN2
+		movne	\irqnr, #IRQ_IN2
+		bne	1001f
+
+		tst	\irqstat, #IRQ_MASK_IN3
+		movne	\irqnr, #IRQ_IN3
+		bne	1001f
+
+		tst	\irqstat, #IRQ_MASK_PCI
+		movne	\irqnr, #IRQ_PCI
+		bne	1001f
+
+		tst	\irqstat, #IRQ_MASK_DOORBELLHOST
+		movne	\irqnr, #IRQ_DOORBELLHOST
+		bne     1001f
+
+		tst	\irqstat, #IRQ_MASK_I2OINPOST
+		movne	\irqnr, #IRQ_I2OINPOST
+		bne	1001f
+
+		tst	\irqstat, #IRQ_MASK_TIMER1
+		movne	\irqnr, #IRQ_TIMER1
+		bne	1001f
+
+		tst	\irqstat, #IRQ_MASK_TIMER2
+		movne	\irqnr, #IRQ_TIMER2
+		bne	1001f
+
+		tst	\irqstat, #IRQ_MASK_TIMER3
+		movne	\irqnr, #IRQ_TIMER3
+		bne	1001f
+
+		tst	\irqstat, #IRQ_MASK_UART_TX
+		movne	\irqnr, #IRQ_CONTX
+		bne	1001f
+
+		tst	\irqstat, #IRQ_MASK_PCI_ABORT
+		movne	\irqnr, #IRQ_PCI_ABORT
+		bne	1001f
+
+		tst	\irqstat, #IRQ_MASK_PCI_SERR
+		movne	\irqnr, #IRQ_PCI_SERR
+		bne	1001f
+
+		tst	\irqstat, #IRQ_MASK_DISCARD_TIMER
+		movne	\irqnr, #IRQ_DISCARD_TIMER
+		bne	1001f
+
+		tst	\irqstat, #IRQ_MASK_PCI_DPERR
+		movne	\irqnr, #IRQ_PCI_DPERR
+		bne	1001f
+
+		tst	\irqstat, #IRQ_MASK_PCI_PERR
+		movne	\irqnr, #IRQ_PCI_PERR
+1001:
+		.endm
+
diff --git a/arch/arm/mach-footbridge/include/mach/hardware.h b/arch/arm/mach-footbridge/include/mach/hardware.h
new file mode 100644
index 000000000000..ffaea90486f9
--- /dev/null
+++ b/arch/arm/mach-footbridge/include/mach/hardware.h
@@ -0,0 +1,105 @@
+/*
+ *  arch/arm/mach-footbridge/include/mach/hardware.h
+ *
+ *  Copyright (C) 1998-1999 Russell King.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ *  This file contains the hardware definitions of the EBSA-285.
+ */
+#ifndef __ASM_ARCH_HARDWARE_H
+#define __ASM_ARCH_HARDWARE_H
+
+#include <mach/memory.h>
+
+/*   Virtual      Physical	Size
+ * 0xff800000	0x40000000	1MB	X-Bus
+ * 0xff000000	0x7c000000	1MB	PCI I/O space
+ * 0xfe000000	0x42000000	1MB	CSR
+ * 0xfd000000	0x78000000	1MB	Outbound write flush (not supported)
+ * 0xfc000000	0x79000000	1MB	PCI IACK/special space
+ * 0xfb000000	0x7a000000	16MB	PCI Config type 1
+ * 0xfa000000	0x7b000000	16MB	PCI Config type 0
+ * 0xf9000000	0x50000000	1MB	Cache flush
+ * 0xf0000000	0x80000000	16MB	ISA memory
+ */
+#define XBUS_SIZE		0x00100000
+#define XBUS_BASE		0xff800000
+
+#define PCIO_SIZE		0x00100000
+#define PCIO_BASE		0xff000000
+
+#define ARMCSR_SIZE		0x00100000
+#define ARMCSR_BASE		0xfe000000
+
+#define WFLUSH_SIZE		0x00100000
+#define WFLUSH_BASE		0xfd000000
+
+#define PCIIACK_SIZE		0x00100000
+#define PCIIACK_BASE		0xfc000000
+
+#define PCICFG1_SIZE		0x01000000
+#define PCICFG1_BASE		0xfb000000
+
+#define PCICFG0_SIZE		0x01000000
+#define PCICFG0_BASE		0xfa000000
+
+#define PCIMEM_SIZE		0x01000000
+#define PCIMEM_BASE		0xf0000000
+
+#define XBUS_LEDS		((volatile unsigned char *)(XBUS_BASE + 0x12000))
+#define XBUS_LED_AMBER		(1 << 0)
+#define XBUS_LED_GREEN		(1 << 1)
+#define XBUS_LED_RED		(1 << 2)
+#define XBUS_LED_TOGGLE		(1 << 8)
+
+#define XBUS_SWITCH		((volatile unsigned char *)(XBUS_BASE + 0x12000))
+#define XBUS_SWITCH_SWITCH	((*XBUS_SWITCH) & 15)
+#define XBUS_SWITCH_J17_13	((*XBUS_SWITCH) & (1 << 4))
+#define XBUS_SWITCH_J17_11	((*XBUS_SWITCH) & (1 << 5))
+#define XBUS_SWITCH_J17_9	((*XBUS_SWITCH) & (1 << 6))
+
+#define UNCACHEABLE_ADDR	(ARMCSR_BASE + 0x108)
+
+
+/* PIC irq control */
+#define PIC_LO			0x20
+#define PIC_MASK_LO		0x21
+#define PIC_HI			0xA0
+#define PIC_MASK_HI		0xA1
+
+/* GPIO pins */
+#define GPIO_CCLK		0x800
+#define GPIO_DSCLK		0x400
+#define GPIO_E2CLK		0x200
+#define GPIO_IOLOAD		0x100
+#define GPIO_RED_LED		0x080
+#define GPIO_WDTIMER		0x040
+#define GPIO_DATA		0x020
+#define GPIO_IOCLK		0x010
+#define GPIO_DONE		0x008
+#define GPIO_FAN		0x004
+#define GPIO_GREEN_LED		0x002
+#define GPIO_RESET		0x001
+
+/* CPLD pins */
+#define CPLD_DS_ENABLE		8
+#define CPLD_7111_DISABLE	4
+#define CPLD_UNMUTE		2
+#define CPLD_FLASH_WR_ENABLE	1
+
+#ifndef __ASSEMBLY__
+extern void gpio_modify_op(int mask, int set);
+extern void gpio_modify_io(int mask, int in);
+extern int  gpio_read(void);
+extern void cpld_modify(int mask, int set);
+#endif
+
+#define pcibios_assign_all_busses()	1
+
+#define PCIBIOS_MIN_IO		0x1000
+#define PCIBIOS_MIN_MEM 	0x81000000
+
+#endif
diff --git a/arch/arm/mach-footbridge/include/mach/io.h b/arch/arm/mach-footbridge/include/mach/io.h
new file mode 100644
index 000000000000..a7b066239996
--- /dev/null
+++ b/arch/arm/mach-footbridge/include/mach/io.h
@@ -0,0 +1,39 @@
+/*
+ *  arch/arm/mach-footbridge/include/mach/io.h
+ *
+ *  Copyright (C) 1997-1999 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ *  Modifications:
+ *   06-12-1997	RMK	Created.
+ *   07-04-1999	RMK	Major cleanup
+ */
+#ifndef __ASM_ARM_ARCH_IO_H
+#define __ASM_ARM_ARCH_IO_H
+
+#include <mach/hardware.h>
+
+#define IO_SPACE_LIMIT 0xffff
+
+/*
+ * Translation of various region addresses to virtual addresses
+ */
+#define __io(a)			((void __iomem *)(PCIO_BASE + (a)))
+#if 1
+#define __mem_pci(a)		(a)
+#else
+
+static inline void __iomem *___mem_pci(void __iomem *p)
+{
+	unsigned long a = (unsigned long)p;
+	BUG_ON(a <= 0xc0000000 || a >= 0xe0000000);
+	return p;
+}
+
+#define __mem_pci(a)		___mem_pci(a)
+#endif
+
+#endif
diff --git a/arch/arm/mach-footbridge/include/mach/irqs.h b/arch/arm/mach-footbridge/include/mach/irqs.h
new file mode 100644
index 000000000000..400551e43e4e
--- /dev/null
+++ b/arch/arm/mach-footbridge/include/mach/irqs.h
@@ -0,0 +1,98 @@
+/*
+ * arch/arm/mach-footbridge/include/mach/irqs.h
+ *
+ * Copyright (C) 1998 Russell King
+ * Copyright (C) 1998 Phil Blundell
+ *
+ * Changelog:
+ *  20-Jan-1998	RMK	Started merge of EBSA286, CATS and NetWinder
+ *  01-Feb-1999	PJB	ISA IRQs start at 0 not 16
+ */
+#include <asm/mach-types.h>
+
+#define NR_IRQS			36
+#define NR_DC21285_IRQS		16
+
+#define _ISA_IRQ(x)		(0 + (x))
+#define _ISA_INR(x)		((x) - 0)
+#define _DC21285_IRQ(x)		(16 + (x))
+#define _DC21285_INR(x)		((x) - 16)
+
+/*
+ * This is a list of all interrupts that the 21285
+ * can generate and we handle.
+ */
+#define IRQ_CONRX		_DC21285_IRQ(0)
+#define IRQ_CONTX		_DC21285_IRQ(1)
+#define IRQ_TIMER1		_DC21285_IRQ(2)
+#define IRQ_TIMER2		_DC21285_IRQ(3)
+#define IRQ_TIMER3		_DC21285_IRQ(4)
+#define IRQ_IN0			_DC21285_IRQ(5)
+#define IRQ_IN1			_DC21285_IRQ(6)
+#define IRQ_IN2			_DC21285_IRQ(7)
+#define IRQ_IN3			_DC21285_IRQ(8)
+#define IRQ_DOORBELLHOST	_DC21285_IRQ(9)
+#define IRQ_DMA1		_DC21285_IRQ(10)
+#define IRQ_DMA2		_DC21285_IRQ(11)
+#define IRQ_PCI			_DC21285_IRQ(12)
+#define IRQ_SDRAMPARITY		_DC21285_IRQ(13)
+#define IRQ_I2OINPOST		_DC21285_IRQ(14)
+#define IRQ_PCI_ABORT		_DC21285_IRQ(15)
+#define IRQ_PCI_SERR		_DC21285_IRQ(16)
+#define IRQ_DISCARD_TIMER	_DC21285_IRQ(17)
+#define IRQ_PCI_DPERR		_DC21285_IRQ(18)
+#define IRQ_PCI_PERR		_DC21285_IRQ(19)
+
+#define IRQ_ISA_TIMER		_ISA_IRQ(0)
+#define IRQ_ISA_KEYBOARD	_ISA_IRQ(1)
+#define IRQ_ISA_CASCADE		_ISA_IRQ(2)
+#define IRQ_ISA_UART2		_ISA_IRQ(3)
+#define IRQ_ISA_UART		_ISA_IRQ(4)
+#define IRQ_ISA_FLOPPY		_ISA_IRQ(6)
+#define IRQ_ISA_PRINTER		_ISA_IRQ(7)
+#define IRQ_ISA_RTC_ALARM	_ISA_IRQ(8)
+#define IRQ_ISA_2		_ISA_IRQ(9)
+#define IRQ_ISA_PS2MOUSE	_ISA_IRQ(12)
+#define IRQ_ISA_HARDDISK1	_ISA_IRQ(14)
+#define IRQ_ISA_HARDDISK2	_ISA_IRQ(15)
+
+#define IRQ_MASK_UART_RX	(1 << 2)
+#define IRQ_MASK_UART_TX	(1 << 3)
+#define IRQ_MASK_TIMER1		(1 << 4)
+#define IRQ_MASK_TIMER2		(1 << 5)
+#define IRQ_MASK_TIMER3		(1 << 6)
+#define IRQ_MASK_IN0		(1 << 8)
+#define IRQ_MASK_IN1		(1 << 9)
+#define IRQ_MASK_IN2		(1 << 10)
+#define IRQ_MASK_IN3		(1 << 11)
+#define IRQ_MASK_DOORBELLHOST	(1 << 15)
+#define IRQ_MASK_DMA1		(1 << 16)
+#define IRQ_MASK_DMA2		(1 << 17)
+#define IRQ_MASK_PCI		(1 << 18)
+#define IRQ_MASK_SDRAMPARITY	(1 << 24)
+#define IRQ_MASK_I2OINPOST	(1 << 25)
+#define IRQ_MASK_PCI_ABORT	((1 << 29) | (1 << 30))
+#define IRQ_MASK_PCI_SERR	(1 << 23)
+#define IRQ_MASK_DISCARD_TIMER	(1 << 27)
+#define IRQ_MASK_PCI_DPERR	(1 << 28)
+#define IRQ_MASK_PCI_PERR	(1 << 31)
+
+/*
+ * Netwinder interrupt allocations
+ */
+#define IRQ_NETWINDER_ETHER10	IRQ_IN0
+#define IRQ_NETWINDER_ETHER100	IRQ_IN1
+#define IRQ_NETWINDER_VIDCOMP	IRQ_IN2
+#define IRQ_NETWINDER_PS2MOUSE	_ISA_IRQ(5)
+#define IRQ_NETWINDER_IR	_ISA_IRQ(6)
+#define IRQ_NETWINDER_BUTTON	_ISA_IRQ(10)
+#define IRQ_NETWINDER_VGA	_ISA_IRQ(11)
+#define IRQ_NETWINDER_SOUND	_ISA_IRQ(12)
+
+#undef RTC_IRQ
+#define RTC_IRQ		IRQ_ISA_RTC_ALARM
+#define I8042_KBD_IRQ	IRQ_ISA_KEYBOARD
+#define I8042_AUX_IRQ	(machine_is_netwinder() ? IRQ_NETWINDER_PS2MOUSE : IRQ_ISA_PS2MOUSE)
+#define IRQ_FLOPPYDISK	IRQ_ISA_FLOPPY
+
+#define irq_canonicalize(_i)	(((_i) == IRQ_ISA_CASCADE) ? IRQ_ISA_2 : _i)
diff --git a/arch/arm/mach-footbridge/include/mach/memory.h b/arch/arm/mach-footbridge/include/mach/memory.h
new file mode 100644
index 000000000000..e9cae99dd1f9
--- /dev/null
+++ b/arch/arm/mach-footbridge/include/mach/memory.h
@@ -0,0 +1,67 @@
+/*
+ *  arch/arm/mach-footbridge/include/mach/memory.h
+ *
+ *  Copyright (C) 1996-1999 Russell King.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ *  Changelog:
+ *   20-Oct-1996 RMK	Created
+ *   31-Dec-1997 RMK	Fixed definitions to reduce warnings.
+ *   17-May-1998 DAG	Added __virt_to_bus and __bus_to_virt functions.
+ *   21-Nov-1998 RMK	Changed __virt_to_bus and __bus_to_virt to macros.
+ *   21-Mar-1999 RMK	Added PAGE_OFFSET for co285 architecture.
+ *			Renamed to memory.h
+ *			Moved PAGE_OFFSET and TASK_SIZE here
+ */
+#ifndef __ASM_ARCH_MEMORY_H
+#define __ASM_ARCH_MEMORY_H
+
+
+#if defined(CONFIG_FOOTBRIDGE_ADDIN)
+/*
+ * If we may be using add-in footbridge mode, then we must
+ * use the out-of-line translation that makes use of the
+ * PCI BAR
+ */
+#ifndef __ASSEMBLY__
+extern unsigned long __virt_to_bus(unsigned long);
+extern unsigned long __bus_to_virt(unsigned long);
+#endif
+
+#elif defined(CONFIG_FOOTBRIDGE_HOST)
+
+#define __virt_to_bus(x)	((x) - 0xe0000000)
+#define __bus_to_virt(x)	((x) + 0xe0000000)
+
+#else
+
+#error "Undefined footbridge mode"
+
+#endif
+
+/* Task size and page offset at 3GB */
+#define TASK_SIZE		UL(0xbf000000)
+#define PAGE_OFFSET		UL(0xc0000000)
+
+/*
+ * Cache flushing area.
+ */
+#define FLUSH_BASE		0xf9000000
+
+/*
+ * Physical DRAM offset.
+ */
+#define PHYS_OFFSET		UL(0x00000000)
+
+/*
+ * This decides where the kernel will search for a free chunk of vm
+ * space during mmap's.
+ */
+#define TASK_UNMAPPED_BASE ((TASK_SIZE + 0x01000000) / 3)
+
+#define FLUSH_BASE_PHYS		0x50000000
+
+#endif
diff --git a/arch/arm/mach-footbridge/include/mach/system.h b/arch/arm/mach-footbridge/include/mach/system.h
new file mode 100644
index 000000000000..01c9f407f498
--- /dev/null
+++ b/arch/arm/mach-footbridge/include/mach/system.h
@@ -0,0 +1,69 @@
+/*
+ *  arch/arm/mach-footbridge/include/mach/system.h
+ *
+ *  Copyright (C) 1996-1999 Russell King.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <asm/hardware/dec21285.h>
+#include <asm/io.h>
+#include <mach/hardware.h>
+#include <asm/leds.h>
+#include <asm/mach-types.h>
+
+static inline void arch_idle(void)
+{
+	cpu_do_idle();
+}
+
+static inline void arch_reset(char mode)
+{
+	if (mode == 's') {
+		/*
+		 * Jump into the ROM
+		 */
+		cpu_reset(0x41000000);
+	} else {
+		if (machine_is_netwinder()) {
+			/* open up the SuperIO chip
+			 */
+			outb(0x87, 0x370);
+			outb(0x87, 0x370);
+
+			/* aux function group 1 (logical device 7)
+			 */
+			outb(0x07, 0x370);
+			outb(0x07, 0x371);
+
+			/* set GP16 for WD-TIMER output
+			 */
+			outb(0xe6, 0x370);
+			outb(0x00, 0x371);
+
+			/* set a RED LED and toggle WD_TIMER for rebooting
+			 */
+			outb(0xc4, 0x338);
+		} else {
+			/* 
+			 * Force the watchdog to do a CPU reset.
+			 *
+			 * After making sure that the watchdog is disabled
+			 * (so we can change the timer registers) we first
+			 * enable the timer to autoreload itself.  Next, the
+			 * timer interval is set really short and any
+			 * current interrupt request is cleared (so we can
+			 * see an edge transition).  Finally, TIMER4 is
+			 * enabled as the watchdog.
+			 */
+			*CSR_SA110_CNTL &= ~(1 << 13);
+			*CSR_TIMER4_CNTL = TIMER_CNTL_ENABLE |
+					   TIMER_CNTL_AUTORELOAD |
+					   TIMER_CNTL_DIV16;
+			*CSR_TIMER4_LOAD = 0x2;
+			*CSR_TIMER4_CLR  = 0;
+			*CSR_SA110_CNTL |= (1 << 13);
+		}
+	}
+}
diff --git a/arch/arm/mach-footbridge/include/mach/timex.h b/arch/arm/mach-footbridge/include/mach/timex.h
new file mode 100644
index 000000000000..d0fea9d6d4ab
--- /dev/null
+++ b/arch/arm/mach-footbridge/include/mach/timex.h
@@ -0,0 +1,18 @@
+/*
+ *  arch/arm/mach-footbridge/include/mach/timex.h
+ *
+ *  Copyright (C) 1998 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ *  EBSA285 architecture timex specifications
+ */
+
+/*
+ * We assume a constant here; this satisfies the maths in linux/timex.h
+ * and linux/time.h.  CLOCK_TICK_RATE is actually system dependent, but
+ * this must be a constant.
+ */
+#define CLOCK_TICK_RATE		(50000000/16)
diff --git a/arch/arm/mach-footbridge/include/mach/uncompress.h b/arch/arm/mach-footbridge/include/mach/uncompress.h
new file mode 100644
index 000000000000..5dfa44287346
--- /dev/null
+++ b/arch/arm/mach-footbridge/include/mach/uncompress.h
@@ -0,0 +1,38 @@
+/*
+ *  arch/arm/mach-footbridge/include/mach/uncompress.h
+ *
+ *  Copyright (C) 1996-1999 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <asm/mach-types.h>
+
+/*
+ * Note! This could cause problems on the NetWinder
+ */
+#define DC21285_BASE ((volatile unsigned int *)0x42000160)
+#define SER0_BASE    ((volatile unsigned char *)0x7c0003f8)
+
+static inline void putc(char c)
+{
+	if (machine_is_netwinder()) {
+		while ((SER0_BASE[5] & 0x60) != 0x60)
+			barrier();
+		SER0_BASE[0] = c;
+	} else {
+		while (DC21285_BASE[6] & 8);
+		DC21285_BASE[0] = c;
+	}
+}
+
+static inline void flush(void)
+{
+}
+
+/*
+ * nothing to do
+ */
+#define arch_decomp_setup()
+#define arch_decomp_wdog()
diff --git a/arch/arm/mach-footbridge/include/mach/vmalloc.h b/arch/arm/mach-footbridge/include/mach/vmalloc.h
new file mode 100644
index 000000000000..d0958d860a3c
--- /dev/null
+++ b/arch/arm/mach-footbridge/include/mach/vmalloc.h
@@ -0,0 +1,10 @@
+/*
+ *  arch/arm/mach-footbridge/include/mach/vmalloc.h
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+
+#define VMALLOC_END       (PAGE_OFFSET + 0x30000000)
diff --git a/arch/arm/mach-footbridge/isa-irq.c b/arch/arm/mach-footbridge/isa-irq.c
index 79443ffc8916..7132e522c366 100644
--- a/arch/arm/mach-footbridge/isa-irq.c
+++ b/arch/arm/mach-footbridge/isa-irq.c
@@ -21,7 +21,7 @@
 
 #include <asm/mach/irq.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/hardware/dec21285.h>
 #include <asm/irq.h>
 #include <asm/io.h>
diff --git a/arch/arm/mach-footbridge/netwinder-leds.c b/arch/arm/mach-footbridge/netwinder-leds.c
index 8e9cac5a213b..d91a4f4a32dc 100644
--- a/arch/arm/mach-footbridge/netwinder-leds.c
+++ b/arch/arm/mach-footbridge/netwinder-leds.c
@@ -21,7 +21,7 @@
 #include <linux/init.h>
 #include <linux/spinlock.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/leds.h>
 #include <asm/mach-types.h>
 #include <asm/system.h>
diff --git a/arch/arm/mach-footbridge/time.c b/arch/arm/mach-footbridge/time.c
index d5cfcda385d6..004819ea85c8 100644
--- a/arch/arm/mach-footbridge/time.c
+++ b/arch/arm/mach-footbridge/time.c
@@ -1,5 +1,5 @@
 /*
- *  linux/include/asm-arm/arch-ebsa285/time.h
+ *  arch/arm/mach-footbridge/include/mach/time.h
  *
  *  Copyright (C) 1998 Russell King.
  *  Copyright (C) 1998 Phil Blundell
@@ -23,7 +23,7 @@
 #include <linux/mc146818rtc.h>
 #include <linux/bcd.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 
 #include <asm/mach/time.h>
@@ -49,12 +49,12 @@ static unsigned long __init get_isa_cmos_time(void)
 	} while (sec != CMOS_READ(RTC_SECONDS));
 
 	if (!(CMOS_READ(RTC_CONTROL) & RTC_DM_BINARY) || RTC_ALWAYS_BCD) {
-		BCD_TO_BIN(sec);
-		BCD_TO_BIN(min);
-		BCD_TO_BIN(hour);
-		BCD_TO_BIN(day);
-		BCD_TO_BIN(mon);
-		BCD_TO_BIN(year);
+		sec = bcd2bin(sec);
+		min = bcd2bin(min);
+		hour = bcd2bin(hour);
+		day = bcd2bin(day);
+		mon = bcd2bin(mon);
+		year = bcd2bin(year);
 	}
 	if ((year += 1900) < 1970)
 		year += 100;
@@ -76,7 +76,7 @@ static int set_isa_cmos_time(void)
 
 	cmos_minutes = CMOS_READ(RTC_MINUTES);
 	if (!(save_control & RTC_DM_BINARY) || RTC_ALWAYS_BCD)
-		BCD_TO_BIN(cmos_minutes);
+		cmos_minutes = bcd2bin(cmos_minutes);
 
 	/*
 	 * since we're only adjusting minutes and seconds,
@@ -92,8 +92,8 @@ static int set_isa_cmos_time(void)
 
 	if (abs(real_minutes - cmos_minutes) < 30) {
 		if (!(save_control & RTC_DM_BINARY) || RTC_ALWAYS_BCD) {
-			BIN_TO_BCD(real_seconds);
-			BIN_TO_BCD(real_minutes);
+			real_seconds = bin2bcd(real_seconds);
+			real_minutes = bin2bcd(real_minutes);
 		}
 		CMOS_WRITE(real_seconds,RTC_SECONDS);
 		CMOS_WRITE(real_minutes,RTC_MINUTES);
diff --git a/arch/arm/mach-h720x/common.c b/arch/arm/mach-h720x/common.c
index 45144ad2bed9..b5f9741ae13c 100644
--- a/arch/arm/mach-h720x/common.c
+++ b/arch/arm/mach-h720x/common.c
@@ -23,11 +23,11 @@
 #include <asm/pgtable.h>
 #include <asm/dma.h>
 #include <asm/io.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/irq.h>
 #include <asm/mach/irq.h>
 #include <asm/mach/map.h>
-#include <asm/arch/irqs.h>
+#include <mach/irqs.h>
 
 #include <asm/mach/dma.h>
 
diff --git a/arch/arm/mach-h720x/cpu-h7201.c b/arch/arm/mach-h720x/cpu-h7201.c
index c2a431f482f0..24df2a349a98 100644
--- a/arch/arm/mach-h720x/cpu-h7201.c
+++ b/arch/arm/mach-h720x/cpu-h7201.c
@@ -17,9 +17,9 @@
 #include <linux/interrupt.h>
 #include <linux/module.h>
 #include <asm/types.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/irq.h>
-#include <asm/arch/irqs.h>
+#include <mach/irqs.h>
 #include <asm/mach/irq.h>
 #include <asm/mach/time.h>
 #include "common.h"
diff --git a/arch/arm/mach-h720x/cpu-h7202.c b/arch/arm/mach-h720x/cpu-h7202.c
index c627fa124eb3..53e1f62f2e79 100644
--- a/arch/arm/mach-h720x/cpu-h7202.c
+++ b/arch/arm/mach-h720x/cpu-h7202.c
@@ -17,9 +17,9 @@
 #include <linux/interrupt.h>
 #include <linux/module.h>
 #include <asm/types.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/irq.h>
-#include <asm/arch/irqs.h>
+#include <mach/irqs.h>
 #include <asm/mach/irq.h>
 #include <asm/mach/time.h>
 #include <linux/device.h>
diff --git a/arch/arm/mach-h720x/h7201-eval.c b/arch/arm/mach-h720x/h7201-eval.c
index 407cd4c0aa8a..78be457dc324 100644
--- a/arch/arm/mach-h720x/h7201-eval.c
+++ b/arch/arm/mach-h720x/h7201-eval.c
@@ -25,7 +25,7 @@
 #include <asm/page.h>
 #include <asm/pgtable.h>
 #include <asm/mach/arch.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include "common.h"
 
 MACHINE_START(H7201, "Hynix GMS30C7201")
diff --git a/arch/arm/mach-h720x/h7202-eval.c b/arch/arm/mach-h720x/h7202-eval.c
index bf2acdce62e5..56161d55cf47 100644
--- a/arch/arm/mach-h720x/h7202-eval.c
+++ b/arch/arm/mach-h720x/h7202-eval.c
@@ -25,7 +25,7 @@
 #include <asm/page.h>
 #include <asm/pgtable.h>
 #include <asm/mach/arch.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include "common.h"
 
 static struct resource cirrus_resources[] = {
diff --git a/include/asm-arm/arch-h720x/boards.h b/arch/arm/mach-h720x/include/mach/boards.h
index 8021f81f0742..079b279e1242 100644
--- a/include/asm-arm/arch-h720x/boards.h
+++ b/arch/arm/mach-h720x/include/mach/boards.h
@@ -1,5 +1,5 @@
 /*
- * linux/include/asm-arm/arch-h720x/boards.h
+ * arch/arm/mach-h720x/include/mach/boards.h
  *
  * Copyright (C) 2003 Thomas Gleixner <tglx@linutronix.de>
  *           (C) 2003 Robert Schwebel <r.schwebel@pengutronix.de>
diff --git a/arch/arm/mach-h720x/include/mach/debug-macro.S b/arch/arm/mach-h720x/include/mach/debug-macro.S
new file mode 100644
index 000000000000..6294a1344dda
--- /dev/null
+++ b/arch/arm/mach-h720x/include/mach/debug-macro.S
@@ -0,0 +1,40 @@
+/* arch/arm/mach-h720x/include/mach/debug-macro.S
+ *
+ * Debugging macro include header
+ *
+ *  Copyright (C) 1994-1999 Russell King
+ *  Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+*/
+
+		.equ    io_virt, IO_BASE
+		.equ    io_phys, IO_START
+
+		.macro  addruart,rx
+		mrc     p15, 0, \rx, c1, c0
+		tst     \rx, #1  	       @ MMU enabled?
+		moveq   \rx, #io_phys	       @ physical base address
+		movne   \rx, #io_virt	       @ virtual address
+		add     \rx, \rx, #0x00020000   @ UART1
+		.endm
+
+		.macro  senduart,rd,rx
+		str     \rd, [\rx, #0x0]        @ UARTDR
+
+		.endm
+
+		.macro  waituart,rd,rx
+1001:		ldr     \rd, [\rx, #0x18]       @ UARTFLG
+		tst     \rd, #1 << 5	       @ UARTFLGUTXFF - 1 when full
+		bne     1001b
+		.endm
+
+		.macro  busyuart,rd,rx
+1001:		ldr     \rd, [\rx, #0x18]       @ UARTFLG
+		tst     \rd, #1 << 3	       @ UARTFLGUBUSY - 1 when busy
+		bne     1001b
+		.endm
diff --git a/arch/arm/mach-h720x/include/mach/dma.h b/arch/arm/mach-h720x/include/mach/dma.h
new file mode 100644
index 000000000000..0a9d86ee84fe
--- /dev/null
+++ b/arch/arm/mach-h720x/include/mach/dma.h
@@ -0,0 +1,26 @@
+/*
+ * arch/arm/mach-h720x/include/mach/dma.h
+ *
+ * Architecture DMA routes
+ *
+ * Copyright (C) 1997.1998 Russell King
+ */
+#ifndef __ASM_ARCH_DMA_H
+#define __ASM_ARCH_DMA_H
+
+/*
+ * This is the maximum DMA address that can be DMAd to.
+ * There should not be more than (0xd0000000 - 0xc0000000)
+ * bytes of RAM.
+ */
+#define MAX_DMA_ADDRESS		0xd0000000
+
+#if defined (CONFIG_CPU_H7201)
+#define MAX_DMA_CHANNELS	3
+#elif defined (CONFIG_CPU_H7202)
+#define MAX_DMA_CHANNELS	4
+#else
+#error processor definition missmatch
+#endif
+
+#endif /* __ASM_ARCH_DMA_H */
diff --git a/arch/arm/mach-h720x/include/mach/entry-macro.S b/arch/arm/mach-h720x/include/mach/entry-macro.S
new file mode 100644
index 000000000000..6d3b917c4a18
--- /dev/null
+++ b/arch/arm/mach-h720x/include/mach/entry-macro.S
@@ -0,0 +1,66 @@
+/*
+ * arch/arm/mach-h720x/include/mach/entry-macro.S
+ *
+ * Low-level IRQ helper macros for Hynix HMS720x based platforms
+ *
+ * This file is licensed under  the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+		.macro  disable_fiq
+		.endm
+
+		.macro  get_irqnr_preamble, base, tmp
+		.endm
+
+		.macro  arch_ret_to_user, tmp1, tmp2
+		.endm
+
+		.macro  get_irqnr_and_base, irqnr, irqstat, base, tmp
+#if defined (CONFIG_CPU_H7201) || defined (CONFIG_CPU_H7202)
+		@ we could use the id register on H7202, but this is not
+		@ properly updated when we come back from asm_do_irq
+		@ without a previous return from interrupt
+		@ (see loops below in irq_svc, irq_usr)
+		@ We see unmasked pending ints only, as the masked pending ints
+		@ are not visible here
+
+		mov     \base, #0xf0000000	       @ base register
+		orr     \base, \base, #0x24000	       @ irqbase
+		ldr     \irqstat, [\base, #0x04]        @ get interrupt status
+#if defined (CONFIG_CPU_H7201)
+		ldr	\tmp, =0x001fffff
+#else
+		mvn     \tmp, #0xc0000000
+#endif
+		and     \irqstat, \irqstat, \tmp        @ mask out unused ints
+		mov     \irqnr, #0
+
+		mov     \tmp, #0xff00
+		orr     \tmp, \tmp, #0xff
+		tst     \irqstat, \tmp
+		addeq   \irqnr, \irqnr, #16
+		moveq   \irqstat, \irqstat, lsr #16
+		tst     \irqstat, #255
+		addeq   \irqnr, \irqnr, #8
+		moveq   \irqstat, \irqstat, lsr #8
+		tst     \irqstat, #15
+		addeq   \irqnr, \irqnr, #4
+		moveq   \irqstat, \irqstat, lsr #4
+		tst     \irqstat, #3
+		addeq   \irqnr, \irqnr, #2
+		moveq   \irqstat, \irqstat, lsr #2
+		tst     \irqstat, #1
+		addeq   \irqnr, \irqnr, #1
+		moveq   \irqstat, \irqstat, lsr #1
+		tst     \irqstat, #1		       @ bit 0 should be set
+		.endm
+
+		.macro  irq_prio_table
+		.endm
+
+#else
+#error hynix processor selection missmatch
+#endif
+
diff --git a/include/asm-arm/arch-h720x/h7201-regs.h b/arch/arm/mach-h720x/include/mach/h7201-regs.h
index 49d4f6bd3080..611b4947ccfc 100644
--- a/include/asm-arm/arch-h720x/h7201-regs.h
+++ b/arch/arm/mach-h720x/include/mach/h7201-regs.h
@@ -1,5 +1,5 @@
 /*
- * linux/include/asm-arm/arch-h720x/h7201-regs.h
+ * arch/arm/mach-h720x/include/mach/h7201-regs.h
  *
  * Copyright (C) 2000 Jungjun Kim, Hynix Semiconductor Inc.
  *           (C) 2003 Thomas Gleixner <tglx@linutronix.de>
diff --git a/include/asm-arm/arch-h720x/h7202-regs.h b/arch/arm/mach-h720x/include/mach/h7202-regs.h
index 43d8ba8a6013..17c12eb34995 100644
--- a/include/asm-arm/arch-h720x/h7202-regs.h
+++ b/arch/arm/mach-h720x/include/mach/h7202-regs.h
@@ -1,5 +1,5 @@
 /*
- * linux/include/asm-arm/arch-h720x/h7202-regs.h
+ * arch/arm/mach-h720x/include/mach/h7202-regs.h
  *
  * Copyright (C) 2000 Jungjun Kim, Hynix Semiconductor Inc.
  *           (C) 2003 Thomas Gleixner <tglx@linutronix.de>
diff --git a/arch/arm/mach-h720x/include/mach/hardware.h b/arch/arm/mach-h720x/include/mach/hardware.h
new file mode 100644
index 000000000000..6c19156e2a42
--- /dev/null
+++ b/arch/arm/mach-h720x/include/mach/hardware.h
@@ -0,0 +1,192 @@
+/*
+ * arch/arm/mach-h720x/include/mach/hardware.h
+ *
+ * Copyright (C) 2000 Jungjun Kim, Hynix Semiconductor Inc.
+ *           (C) 2003 Thomas Gleixner <tglx@linutronix.de>
+ *           (C) 2003 Robert Schwebel <r.schwebel@pengutronix.de>
+ *
+ * This file contains the hardware definitions of the h720x processors
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Do not add implementations specific defines here. This files contains
+ * only defines of the onchip peripherals. Add those defines to boards.h,
+ * which is included by this file.
+ */
+
+#ifndef __ASM_ARCH_HARDWARE_H
+#define __ASM_ARCH_HARDWARE_H
+
+#define IOCLK (3686400L)
+
+/* Onchip peripherals */
+
+#define IO_VIRT			0xf0000000	/* IO peripherals */
+#define IO_PHYS			0x80000000
+#define IO_SIZE			0x00050000
+
+#ifdef CONFIG_CPU_H7202
+#include "h7202-regs.h"
+#elif defined CONFIG_CPU_H7201
+#include "h7201-regs.h"
+#else
+#error machine definition mismatch
+#endif
+
+/* Macro to access the CPU IO */
+#define CPU_IO(x) (*(volatile u32*)(x))
+
+/* Macro to access general purpose regs (base, offset) */
+#define CPU_REG(x,y) CPU_IO(x+y)
+
+/* Macro to access irq related regs */
+#define IRQ_REG(x) CPU_REG(IRQC_VIRT,x)
+
+/* CPU registers */
+/* general purpose I/O */
+#define GPIO_VIRT(x)		(IO_VIRT + 0x23000 + ((x)<<5))
+#define GPIO_A_VIRT		(GPIO_VIRT(0))
+#define GPIO_B_VIRT		(GPIO_VIRT(1))
+#define GPIO_C_VIRT		(GPIO_VIRT(2))
+#define GPIO_D_VIRT		(GPIO_VIRT(3))
+#define GPIO_E_VIRT		(GPIO_VIRT(4))
+#define GPIO_AMULSEL		(GPIO_VIRT(0) + 0xA4)
+
+#define AMULSEL_USIN2	(1<<5)
+#define AMULSEL_USOUT2	(1<<6)
+#define AMULSEL_USIN3	(1<<13)
+#define AMULSEL_USOUT3	(1<<14)
+#define AMULSEL_IRDIN	(1<<15)
+#define AMULSEL_IRDOUT	(1<<7)
+
+/* Register offsets general purpose I/O */
+#define GPIO_DATA		0x00
+#define GPIO_DIR		0x04
+#define GPIO_MASK		0x08
+#define GPIO_STAT		0x0C
+#define GPIO_EDGE		0x10
+#define GPIO_CLR		0x14
+#define GPIO_POL		0x18
+#define GPIO_EN			0x1C
+
+/*interrupt controller */
+#define IRQC_VIRT		(IO_VIRT + 0x24000)
+/* register offset interrupt controller */
+#define IRQC_IER		0x00
+#define IRQC_ISR		0x04
+
+/* timer unit */
+#define TIMER_VIRT		(IO_VIRT + 0x25000)
+/* Register offsets timer unit */
+#define TM0_PERIOD   		0x00
+#define TM0_COUNT    		0x08
+#define TM0_CTRL     		0x10
+#define TM1_PERIOD   		0x20
+#define TM1_COUNT    		0x28
+#define TM1_CTRL     		0x30
+#define TM2_PERIOD   		0x40
+#define TM2_COUNT    		0x48
+#define TM2_CTRL     		0x50
+#define TIMER_TOPCTRL		0x60
+#define TIMER_TOPSTAT		0x64
+#define T64_COUNTL		0x80
+#define T64_COUNTH		0x84
+#define T64_CTRL		0x88
+#define T64_BASEL		0x94
+#define T64_BASEH		0x98
+/* Bitmaks timer unit TOPSTAT reg */
+#define TSTAT_T0INT		0x1
+#define TSTAT_T1INT		0x2
+#define TSTAT_T2INT		0x4
+#define TSTAT_T3INT		0x8
+/* Bit description of TMx_CTRL register */
+#define TM_START  		0x1
+#define TM_REPEAT 		0x2
+#define TM_RESET  		0x4
+/* Bit description of TIMER_CTRL register */
+#define ENABLE_TM0_INTR  	0x1
+#define ENABLE_TM1_INTR  	0x2
+#define ENABLE_TM2_INTR  	0x4
+#define TIMER_ENABLE_BIT 	0x8
+#define ENABLE_TIMER64   	0x10
+#define ENABLE_TIMER64_INT	0x20
+
+/* PMU & PLL */
+#define PMU_BASE 		(IO_VIRT + 0x1000)
+#define PMU_MODE		0x00
+#define PMU_STAT   		0x20
+#define PMU_PLL_CTRL 		0x28
+
+/* PMU Mode bits */
+#define PMU_MODE_SLOW		0x00
+#define PMU_MODE_RUN		0x01
+#define PMU_MODE_IDLE		0x02
+#define PMU_MODE_SLEEP		0x03
+#define PMU_MODE_INIT		0x04
+#define PMU_MODE_DEEPSLEEP	0x07
+#define PMU_MODE_WAKEUP		0x08
+
+/* PMU ... */
+#define PLL_2_EN		0x8000
+#define PLL_1_EN		0x4000
+#define PLL_3_MUTE		0x0080
+
+/* Control bits for PMU/ PLL */
+#define PMU_WARMRESET		0x00010000
+#define PLL_CTRL_MASK23		0x000080ff
+
+/* LCD Controller */
+#define LCD_BASE 		(IO_VIRT + 0x10000)
+#define LCD_CTRL 		0x00
+#define LCD_STATUS		0x04
+#define LCD_STATUS_M		0x08
+#define LCD_INTERRUPT		0x0C
+#define LCD_DBAR		0x10
+#define LCD_DCAR		0x14
+#define LCD_TIMING0 		0x20
+#define LCD_TIMING1 		0x24
+#define LCD_TIMING2 		0x28
+#define LCD_TEST		0x40
+
+/* LCD Control Bits */
+#define LCD_CTRL_LCD_ENABLE   	0x00000001
+/* Bits per pixel */
+#define LCD_CTRL_LCD_BPP_MASK 	0x00000006
+#define LCD_CTRL_LCD_4BPP    	0x00000000
+#define LCD_CTRL_LCD_8BPP    	0x00000002
+#define LCD_CTRL_LCD_16BPP   	0x00000004
+#define LCD_CTRL_LCD_BW		0x00000008
+#define LCD_CTRL_LCD_TFT	0x00000010
+#define LCD_CTRL_BGR		0x00001000
+#define LCD_CTRL_LCD_VCOMP	0x00080000
+#define LCD_CTRL_LCD_MONO8	0x00200000
+#define LCD_CTRL_LCD_PWR	0x00400000
+#define LCD_CTRL_LCD_BLE	0x00800000
+#define LCD_CTRL_LDBUSEN	0x01000000
+
+/* Palette */
+#define LCD_PALETTE_BASE 	(IO_VIRT + 0x10400)
+
+/* Serial ports */
+#define SERIAL0_OFS		0x20000
+#define SERIAL0_VIRT 		(IO_VIRT + SERIAL0_OFS)
+#define SERIAL0_BASE		(IO_PHYS + SERIAL0_OFS)
+
+#define SERIAL1_OFS		0x21000
+#define SERIAL1_VIRT 		(IO_VIRT + SERIAL1_OFS)
+#define SERIAL1_BASE		(IO_PHYS + SERIAL1_OFS)
+
+#define SERIAL_ENABLE		0x30
+#define SERIAL_ENABLE_EN	(1<<0)
+
+/* General defines to pacify gcc */
+#define PCIO_BASE 		(0)	/* for inb, outb and friends */
+#define PCIO_VIRT		PCIO_BASE
+
+#define __ASM_ARCH_HARDWARE_INCMACH_H
+#include "boards.h"
+#undef __ASM_ARCH_HARDWARE_INCMACH_H
+
+#endif				/* __ASM_ARCH_HARDWARE_H */
diff --git a/arch/arm/mach-h720x/include/mach/io.h b/arch/arm/mach-h720x/include/mach/io.h
new file mode 100644
index 000000000000..1dab74ce88c6
--- /dev/null
+++ b/arch/arm/mach-h720x/include/mach/io.h
@@ -0,0 +1,24 @@
+/*
+ * arch/arm/mach-h720x/include/mach/io.h
+ *
+ * Copyright (C) 2000 Steve Hill (sjhill@cotw.com)
+ *
+ * Changelog:
+ *
+ *  09-19-2001	JJKIM
+ *  		Created from arch/arm/mach-l7200/include/mach/io.h
+ *
+ *  03-27-2003  Robert Schwebel <r.schwebel@pengutronix.de>:
+ *  		re-unified header files for h720x
+ */
+#ifndef __ASM_ARM_ARCH_IO_H
+#define __ASM_ARM_ARCH_IO_H
+
+#include <mach/hardware.h>
+
+#define IO_SPACE_LIMIT 0xffffffff
+
+#define __io(a)		((void __iomem *)(a))
+#define __mem_pci(a)	(a)
+
+#endif
diff --git a/arch/arm/mach-h720x/include/mach/irqs.h b/arch/arm/mach-h720x/include/mach/irqs.h
new file mode 100644
index 000000000000..430a92b492f1
--- /dev/null
+++ b/arch/arm/mach-h720x/include/mach/irqs.h
@@ -0,0 +1,116 @@
+/*
+ * arch/arm/mach-h720x/include/mach/irqs.h
+ *
+ * Copyright (C) 2000 Jungjun Kim
+ *           (C) 2003 Robert Schwebel <r.schwebel@pengutronix.de>
+ *           (C) 2003 Thomas Gleixner <tglx@linutronix.de>
+ *
+ */
+
+#ifndef __ASM_ARCH_IRQS_H
+#define __ASM_ARCH_IRQS_H
+
+#if defined (CONFIG_CPU_H7201)
+
+#define IRQ_PMU		0		/* 0x000001 */
+#define IRQ_DMA		1 		/* 0x000002 */
+#define IRQ_LCD		2		/* 0x000004 */
+#define IRQ_VGA		3 		/* 0x000008 */
+#define IRQ_PCMCIA1 	4 		/* 0x000010 */
+#define IRQ_PCMCIA2 	5 		/* 0x000020 */
+#define IRQ_AFE		6 		/* 0x000040 */
+#define IRQ_AIC		7 		/* 0x000080 */
+#define IRQ_KEYBOARD 	8 		/* 0x000100 */
+#define IRQ_TIMER0	9 		/* 0x000200 */
+#define IRQ_RTC		10		/* 0x000400 */
+#define IRQ_SOUND	11		/* 0x000800 */
+#define IRQ_USB		12		/* 0x001000 */
+#define IRQ_IrDA 	13		/* 0x002000 */
+#define IRQ_UART0	14		/* 0x004000 */
+#define IRQ_UART1	15		/* 0x008000 */
+#define IRQ_SPI		16		/* 0x010000 */
+#define IRQ_GPIOA 	17		/* 0x020000 */
+#define IRQ_GPIOB	18		/* 0x040000 */
+#define IRQ_GPIOC	19		/* 0x080000 */
+#define IRQ_GPIOD	20		/* 0x100000 */
+#define IRQ_CommRX	21		/* 0x200000 */
+#define IRQ_CommTX	22		/* 0x400000 */
+#define IRQ_Soft	23		/* 0x800000 */
+
+#define NR_GLBL_IRQS	24
+
+#define IRQ_CHAINED_GPIOA(x)  (NR_GLBL_IRQS + x)
+#define IRQ_CHAINED_GPIOB(x)  (IRQ_CHAINED_GPIOA(32) + x)
+#define IRQ_CHAINED_GPIOC(x)  (IRQ_CHAINED_GPIOB(32) + x)
+#define IRQ_CHAINED_GPIOD(x)  (IRQ_CHAINED_GPIOC(32) + x)
+#define NR_IRQS               IRQ_CHAINED_GPIOD(32)
+
+/* Enable mask for multiplexed interrupts */
+#define IRQ_ENA_MUX	(1<<IRQ_GPIOA) | (1<<IRQ_GPIOB) \
+			| (1<<IRQ_GPIOC) | (1<<IRQ_GPIOD)
+
+
+#elif defined (CONFIG_CPU_H7202)
+
+#define IRQ_PMU		0		/* 0x00000001 */
+#define IRQ_DMA		1		/* 0x00000002 */
+#define IRQ_LCD		2		/* 0x00000004 */
+#define IRQ_SOUND	3		/* 0x00000008 */
+#define IRQ_I2S		4		/* 0x00000010 */
+#define IRQ_USB 	5		/* 0x00000020 */
+#define IRQ_MMC 	6		/* 0x00000040 */
+#define IRQ_RTC 	7		/* 0x00000080 */
+#define IRQ_UART0 	8		/* 0x00000100 */
+#define IRQ_UART1 	9		/* 0x00000200 */
+#define IRQ_UART2 	10		/* 0x00000400 */
+#define IRQ_UART3 	11		/* 0x00000800 */
+#define IRQ_KBD 	12		/* 0x00001000 */
+#define IRQ_PS2 	13		/* 0x00002000 */
+#define IRQ_AIC 	14		/* 0x00004000 */
+#define IRQ_TIMER0 	15		/* 0x00008000 */
+#define IRQ_TIMERX 	16		/* 0x00010000 */
+#define IRQ_WDT 	17		/* 0x00020000 */
+#define IRQ_CAN0 	18		/* 0x00040000 */
+#define IRQ_CAN1 	19		/* 0x00080000 */
+#define IRQ_EXT0 	20		/* 0x00100000 */
+#define IRQ_EXT1 	21		/* 0x00200000 */
+#define IRQ_GPIOA 	22		/* 0x00400000 */
+#define IRQ_GPIOB 	23		/* 0x00800000 */
+#define IRQ_GPIOC 	24		/* 0x01000000 */
+#define IRQ_GPIOD 	25		/* 0x02000000 */
+#define IRQ_GPIOE 	26		/* 0x04000000 */
+#define IRQ_COMMRX 	27		/* 0x08000000 */
+#define IRQ_COMMTX 	28		/* 0x10000000 */
+#define IRQ_SMC 	29		/* 0x20000000 */
+#define IRQ_Soft 	30		/* 0x40000000 */
+#define IRQ_RESERVED1 	31		/* 0x80000000 */
+#define NR_GLBL_IRQS	32
+
+#define NR_TIMERX_IRQS	3
+
+#define IRQ_CHAINED_GPIOA(x)  (NR_GLBL_IRQS + x)
+#define IRQ_CHAINED_GPIOB(x)  (IRQ_CHAINED_GPIOA(32) + x)
+#define IRQ_CHAINED_GPIOC(x)  (IRQ_CHAINED_GPIOB(32) + x)
+#define IRQ_CHAINED_GPIOD(x)  (IRQ_CHAINED_GPIOC(32) + x)
+#define IRQ_CHAINED_GPIOE(x)  (IRQ_CHAINED_GPIOD(32) + x)
+#define IRQ_CHAINED_TIMERX(x) (IRQ_CHAINED_GPIOE(32) + x)
+#define IRQ_TIMER1            (IRQ_CHAINED_TIMERX(0))
+#define IRQ_TIMER2            (IRQ_CHAINED_TIMERX(1))
+#define IRQ_TIMER64B          (IRQ_CHAINED_TIMERX(2))
+
+#define NR_IRQS		(IRQ_CHAINED_TIMERX(NR_TIMERX_IRQS))
+
+/* Enable mask for multiplexed interrupts */
+#define IRQ_ENA_MUX	(1<<IRQ_TIMERX) | (1<<IRQ_GPIOA) | (1<<IRQ_GPIOB) | \
+			(1<<IRQ_GPIOC) 	| (1<<IRQ_GPIOD) | (1<<IRQ_GPIOE) | \
+			(1<<IRQ_TIMERX)
+
+#else
+#error cpu definition mismatch
+#endif
+
+/* decode irq number to register number */
+#define IRQ_TO_REGNO(irq) ((irq - NR_GLBL_IRQS) >> 5)
+#define IRQ_TO_BIT(irq) (1 << ((irq - NR_GLBL_IRQS) % 32))
+
+#endif
diff --git a/arch/arm/mach-h720x/include/mach/memory.h b/arch/arm/mach-h720x/include/mach/memory.h
new file mode 100644
index 000000000000..cb26f49cc4e1
--- /dev/null
+++ b/arch/arm/mach-h720x/include/mach/memory.h
@@ -0,0 +1,29 @@
+/*
+ * arch/arm/mach-h720x/include/mach/memory.h
+ *
+ * Copyright (c) 2000 Jungjun Kim
+ *
+ */
+#ifndef __ASM_ARCH_MEMORY_H
+#define __ASM_ARCH_MEMORY_H
+
+/*
+ * Page offset:
+ *    ( 0xc0000000UL )
+ */
+#define PHYS_OFFSET	UL(0x40000000)
+
+/*
+ * Virtual view <-> DMA view memory address translations
+ * virt_to_bus: Used to translate the virtual address to an
+ *              address suitable to be passed to set_dma_addr
+ * bus_to_virt: Used to convert an address for DMA operations
+ *              to an address that the kernel can use.
+ *
+ * There is something to do here later !, Mar 2000, Jungjun Kim
+ */
+
+#define __virt_to_bus(x)	__virt_to_phys(x)
+#define __bus_to_virt(x)	__phys_to_virt(x)
+
+#endif
diff --git a/arch/arm/mach-h720x/include/mach/system.h b/arch/arm/mach-h720x/include/mach/system.h
new file mode 100644
index 000000000000..e4a7c760d52a
--- /dev/null
+++ b/arch/arm/mach-h720x/include/mach/system.h
@@ -0,0 +1,33 @@
+/*
+ * arch/arm/mach-h720x/include/mach/system.h
+ *
+ * Copyright (C) 2001-2002 Jungjun Kim, Hynix Semiconductor Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ * arch/arm/mach-h720x/include/mach/system.h
+ *
+ */
+
+#ifndef __ASM_ARCH_SYSTEM_H
+#define __ASM_ARCH_SYSTEM_H
+#include <mach/hardware.h>
+
+static void arch_idle(void)
+{
+	CPU_REG (PMU_BASE, PMU_MODE) = PMU_MODE_IDLE;
+	nop();
+	nop();
+	CPU_REG (PMU_BASE, PMU_MODE) = PMU_MODE_RUN;
+	nop();
+	nop();
+}
+
+
+static __inline__ void arch_reset(char mode)
+{
+	CPU_REG (PMU_BASE, PMU_STAT) |= PMU_WARMRESET;
+}
+
+#endif
diff --git a/arch/arm/mach-h720x/include/mach/timex.h b/arch/arm/mach-h720x/include/mach/timex.h
new file mode 100644
index 000000000000..3f2f447ff36b
--- /dev/null
+++ b/arch/arm/mach-h720x/include/mach/timex.h
@@ -0,0 +1,15 @@
+/*
+ * arch/arm/mach-h720x/include/mach/timex.h
+ * Copyright (C) 2000 Jungjun Kim, Hynix Semiconductor Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_TIMEX
+#define __ASM_ARCH_TIMEX
+
+#define CLOCK_TICK_RATE		3686400
+
+#endif
diff --git a/arch/arm/mach-h720x/include/mach/uncompress.h b/arch/arm/mach-h720x/include/mach/uncompress.h
new file mode 100644
index 000000000000..d6623234f61e
--- /dev/null
+++ b/arch/arm/mach-h720x/include/mach/uncompress.h
@@ -0,0 +1,37 @@
+/*
+ * arch/arm/mach-h720x/include/mach/uncompress.h
+ *
+ * Copyright (C) 2001-2002 Jungjun Kim
+ */
+
+#ifndef __ASM_ARCH_UNCOMPRESS_H
+#define __ASM_ARCH_UNCOMPRESS_H
+
+#include <mach/hardware.h>
+
+#define LSR 	0x14
+#define TEMPTY 	0x40
+
+static inline void putc(int c)
+{
+	volatile unsigned char *p = (volatile unsigned char *)(IO_PHYS+0x20000);
+
+	/* wait until transmit buffer is empty */
+	while((p[LSR] & TEMPTY) == 0x0)
+		barrier();
+
+	/* write next character */
+	*p = c;
+}
+
+static inline void flush(void)
+{
+}
+
+/*
+ * nothing to do
+ */
+#define arch_decomp_setup()
+#define arch_decomp_wdog()
+
+#endif
diff --git a/arch/arm/mach-h720x/include/mach/vmalloc.h b/arch/arm/mach-h720x/include/mach/vmalloc.h
new file mode 100644
index 000000000000..ff1460d6841b
--- /dev/null
+++ b/arch/arm/mach-h720x/include/mach/vmalloc.h
@@ -0,0 +1,10 @@
+/*
+ * arch/arm/mach-h720x/include/mach/vmalloc.h
+ */
+
+#ifndef __ARCH_ARM_VMALLOC_H
+#define __ARCH_ARM_VMALLOC_H
+
+#define VMALLOC_END       (PAGE_OFFSET + 0x10000000)
+
+#endif
diff --git a/arch/arm/mach-imx/clock.c b/arch/arm/mach-imx/clock.c
index 6a90fe5578df..4b4230db3765 100644
--- a/arch/arm/mach-imx/clock.c
+++ b/arch/arm/mach-imx/clock.c
@@ -23,7 +23,7 @@
 #include <linux/err.h>
 
 #include <asm/io.h>
-#include <asm/arch/imx-regs.h>
+#include <mach/imx-regs.h>
 
 /*
  * Very simple approach: We can't disable clocks, so we do
@@ -172,24 +172,29 @@ found:
 
 	return clk;
 }
+EXPORT_SYMBOL(clk_get);
 
 void clk_put(struct clk *clk)
 {
 }
+EXPORT_SYMBOL(clk_put);
 
 int clk_enable(struct clk *clk)
 {
 	return 0;
 }
+EXPORT_SYMBOL(clk_enable);
 
 void clk_disable(struct clk *clk)
 {
 }
+EXPORT_SYMBOL(clk_disable);
 
 unsigned long clk_get_rate(struct clk *clk)
 {
 	return clk->get_rate();
 }
+EXPORT_SYMBOL(clk_get_rate);
 
 int imx_clocks_init(void)
 {
diff --git a/arch/arm/mach-imx/cpufreq.c b/arch/arm/mach-imx/cpufreq.c
index be0809b33e08..434b4ca0af67 100644
--- a/arch/arm/mach-imx/cpufreq.c
+++ b/arch/arm/mach-imx/cpufreq.c
@@ -36,7 +36,7 @@
 #include <linux/err.h>
 #include <asm/system.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 
 #include "generic.h"
 
diff --git a/arch/arm/mach-imx/dma.c b/arch/arm/mach-imx/dma.c
index ee1c6f06ff64..c10810c936b3 100644
--- a/arch/arm/mach-imx/dma.c
+++ b/arch/arm/mach-imx/dma.c
@@ -30,9 +30,9 @@
 
 #include <asm/system.h>
 #include <asm/irq.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/dma.h>
-#include <asm/arch/imx-dma.h>
+#include <mach/imx-dma.h>
 
 struct imx_dma_channel imx_dma_channels[IMX_DMA_CHANNELS];
 
diff --git a/arch/arm/mach-imx/generic.c b/arch/arm/mach-imx/generic.c
index 98ddd8a6d05f..fa72174dd95c 100644
--- a/arch/arm/mach-imx/generic.c
+++ b/arch/arm/mach-imx/generic.c
@@ -29,13 +29,13 @@
 #include <linux/string.h>
 
 #include <asm/errno.h>
-#include <asm/arch/imxfb.h>
-#include <asm/hardware.h>
-#include <asm/arch/imx-regs.h>
+#include <mach/imxfb.h>
+#include <mach/hardware.h>
+#include <mach/imx-regs.h>
 
 #include <asm/mach/map.h>
-#include <asm/arch/mmc.h>
-#include <asm/arch/gpio.h>
+#include <mach/mmc.h>
+#include <mach/gpio.h>
 
 unsigned long imx_gpio_alloc_map[(GPIO_PORT_MAX + 1) * 32 / BITS_PER_LONG];
 
@@ -251,7 +251,6 @@ void __init set_imx_fb_info(struct imxfb_mach_info *hard_imx_fb_info)
 {
 	memcpy(&imx_fb_info,hard_imx_fb_info,sizeof(struct imxfb_mach_info));
 }
-EXPORT_SYMBOL(set_imx_fb_info);
 
 static struct resource imxfb_resources[] = {
 	[0] = {
diff --git a/arch/arm/mach-imx/include/mach/debug-macro.S b/arch/arm/mach-imx/include/mach/debug-macro.S
new file mode 100644
index 000000000000..87802bbfe633
--- /dev/null
+++ b/arch/arm/mach-imx/include/mach/debug-macro.S
@@ -0,0 +1,34 @@
+/* arch/arm/mach-imx/include/mach/debug-macro.S
+ *
+ * Debugging macro include header
+ *
+ *  Copyright (C) 1994-1999 Russell King
+ *  Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+*/
+
+		.macro	addruart,rx
+		mrc	p15, 0, \rx, c1, c0
+		tst	\rx, #1			@ MMU enabled?
+		moveq	\rx, #0x00000000	@ physical
+		movne	\rx, #0xe0000000	@ virtual
+		orreq	\rx, \rx, #0x00200000	@ physical
+		orr	\rx, \rx, #0x00006000	@ UART1 offset
+		.endm
+
+		.macro	senduart,rd,rx
+		str	\rd, [\rx, #0x40]	@ TXDATA
+		.endm
+
+		.macro	waituart,rd,rx
+		.endm
+
+		.macro	busyuart,rd,rx
+1002:		ldr	\rd, [\rx, #0x98]	@ SR2
+		tst	\rd, #1 << 3		@ TXDC
+		beq	1002b			@ wait until transmit done
+		.endm
diff --git a/include/asm-arm/arch-imx/dma.h b/arch/arm/mach-imx/include/mach/dma.h
index 621ff2c730f2..621ff2c730f2 100644
--- a/include/asm-arm/arch-imx/dma.h
+++ b/arch/arm/mach-imx/include/mach/dma.h
diff --git a/arch/arm/mach-imx/include/mach/entry-macro.S b/arch/arm/mach-imx/include/mach/entry-macro.S
new file mode 100644
index 000000000000..e4db679f7766
--- /dev/null
+++ b/arch/arm/mach-imx/include/mach/entry-macro.S
@@ -0,0 +1,32 @@
+/*
+ * arch/arm/mach-imx/include/mach/entry-macro.S
+ *
+ * Low-level IRQ helper macros for iMX-based platforms
+ *
+ * This file is licensed under  the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+#include <mach/hardware.h>
+
+		.macro	disable_fiq
+		.endm
+
+		.macro	get_irqnr_preamble, base, tmp
+		.endm
+
+		.macro	arch_ret_to_user, tmp1, tmp2
+		.endm
+
+#define AITC_NIVECSR   0x40
+		.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
+		ldr	\base, =IO_ADDRESS(IMX_AITC_BASE)
+		@ Load offset & priority of the highest priority
+		@ interrupt pending.
+		ldr	\irqstat, [\base, #AITC_NIVECSR]
+		@ Shift off the priority leaving the offset or
+		@ "interrupt number", use arithmetic shift to
+		@ transform illegal source (0xffff) as -1
+		mov	\irqnr, \irqstat, asr #16
+		adds	\tmp, \irqnr, #1
+		.endm
diff --git a/arch/arm/mach-imx/include/mach/gpio.h b/arch/arm/mach-imx/include/mach/gpio.h
new file mode 100644
index 000000000000..6e3d795f2264
--- /dev/null
+++ b/arch/arm/mach-imx/include/mach/gpio.h
@@ -0,0 +1,102 @@
+#ifndef _IMX_GPIO_H
+
+#include <mach/imx-regs.h>
+
+#define IMX_GPIO_ALLOC_MODE_NORMAL	0
+#define IMX_GPIO_ALLOC_MODE_NO_ALLOC	1
+#define IMX_GPIO_ALLOC_MODE_TRY_ALLOC	2
+#define IMX_GPIO_ALLOC_MODE_ALLOC_ONLY	4
+#define IMX_GPIO_ALLOC_MODE_RELEASE	8
+
+extern int imx_gpio_request(unsigned gpio, const char *label);
+
+extern void imx_gpio_free(unsigned gpio);
+
+extern int imx_gpio_setup_multiple_pins(const int *pin_list, unsigned count,
+					int alloc_mode, const char *label);
+
+extern int imx_gpio_direction_input(unsigned gpio);
+
+extern int imx_gpio_direction_output(unsigned gpio, int value);
+
+extern void __imx_gpio_set_value(unsigned gpio, int value);
+
+static inline int imx_gpio_get_value(unsigned gpio)
+{
+	return SSR(gpio >> GPIO_PORT_SHIFT) & (1 << (gpio & GPIO_PIN_MASK));
+}
+
+static inline void imx_gpio_set_value_inline(unsigned gpio, int value)
+{
+	unsigned long flags;
+
+	raw_local_irq_save(flags);
+	if(value)
+		DR(gpio >> GPIO_PORT_SHIFT) |= (1 << (gpio & GPIO_PIN_MASK));
+	else
+		DR(gpio >> GPIO_PORT_SHIFT) &= ~(1 << (gpio & GPIO_PIN_MASK));
+	raw_local_irq_restore(flags);
+}
+
+static inline void imx_gpio_set_value(unsigned gpio, int value)
+{
+	if(__builtin_constant_p(gpio))
+		imx_gpio_set_value_inline(gpio, value);
+	else
+		__imx_gpio_set_value(gpio, value);
+}
+
+extern int imx_gpio_to_irq(unsigned gpio);
+
+extern int imx_irq_to_gpio(unsigned irq);
+
+/*-------------------------------------------------------------------------*/
+
+/* Wrappers for "new style" GPIO calls. These calls i.MX specific versions
+ * to allow future extension of GPIO logic.
+ */
+
+static inline int gpio_request(unsigned gpio, const char *label)
+{
+	return imx_gpio_request(gpio, label);
+}
+
+static inline void gpio_free(unsigned gpio)
+{
+	imx_gpio_free(gpio);
+}
+
+static inline  int gpio_direction_input(unsigned gpio)
+{
+	return imx_gpio_direction_input(gpio);
+}
+
+static inline int gpio_direction_output(unsigned gpio, int value)
+{
+	return imx_gpio_direction_output(gpio, value);
+}
+
+static inline int gpio_get_value(unsigned gpio)
+{
+	return imx_gpio_get_value(gpio);
+}
+
+static inline void gpio_set_value(unsigned gpio, int value)
+{
+	imx_gpio_set_value(gpio, value);
+}
+
+#include <asm-generic/gpio.h>		/* cansleep wrappers */
+
+static inline int gpio_to_irq(unsigned gpio)
+{
+	return imx_gpio_to_irq(gpio);
+}
+
+static inline int irq_to_gpio(unsigned irq)
+{
+	return imx_irq_to_gpio(irq);
+}
+
+
+#endif
diff --git a/arch/arm/mach-imx/include/mach/hardware.h b/arch/arm/mach-imx/include/mach/hardware.h
new file mode 100644
index 000000000000..c73e9e724c75
--- /dev/null
+++ b/arch/arm/mach-imx/include/mach/hardware.h
@@ -0,0 +1,91 @@
+/*
+ *  arch/arm/mach-imx/include/mach/hardware.h
+ *
+ *  Copyright (C) 1999 ARM Limited.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#ifndef __ASM_ARCH_HARDWARE_H
+#define __ASM_ARCH_HARDWARE_H
+
+#include <asm/sizes.h>
+#include "imx-regs.h"
+
+#ifndef __ASSEMBLY__
+# define __REG(x)	(*((volatile u32 *)IO_ADDRESS(x)))
+
+# define __REG2(x,y)        (*(volatile u32 *)((u32)&__REG(x) + (y)))
+#endif
+
+/*
+ * Memory map
+ */
+
+#define IMX_IO_PHYS		0x00200000
+#define IMX_IO_SIZE		0x00100000
+#define IMX_IO_BASE		0xe0000000
+
+#define IMX_CS0_PHYS		0x10000000
+#define IMX_CS0_SIZE		0x02000000
+#define IMX_CS0_VIRT		0xe8000000
+
+#define IMX_CS1_PHYS		0x12000000
+#define IMX_CS1_SIZE		0x01000000
+#define IMX_CS1_VIRT		0xea000000
+
+#define IMX_CS2_PHYS		0x13000000
+#define IMX_CS2_SIZE		0x01000000
+#define IMX_CS2_VIRT		0xeb000000
+
+#define IMX_CS3_PHYS		0x14000000
+#define IMX_CS3_SIZE		0x01000000
+#define IMX_CS3_VIRT		0xec000000
+
+#define IMX_CS4_PHYS		0x15000000
+#define IMX_CS4_SIZE		0x01000000
+#define IMX_CS4_VIRT		0xed000000
+
+#define IMX_CS5_PHYS		0x16000000
+#define IMX_CS5_SIZE		0x01000000
+#define IMX_CS5_VIRT		0xee000000
+
+#define IMX_FB_VIRT		0xF1000000
+#define IMX_FB_SIZE		(256*1024)
+
+/* macro to get at IO space when running virtually */
+#define IO_ADDRESS(x) ((x) | IMX_IO_BASE)
+
+#ifndef __ASSEMBLY__
+/*
+ * Handy routine to set GPIO functions
+ */
+extern void imx_gpio_mode( int gpio_mode );
+
+#endif
+
+#define MAXIRQNUM                       62
+#define MAXFIQNUM                       62
+#define MAXSWINUM                       62
+
+/*
+ * Use SDRAM for memory
+ */
+#define MEM_SIZE		0x01000000
+
+#ifdef CONFIG_ARCH_MX1ADS
+#include "mx1ads.h"
+#endif
+
+#endif
diff --git a/include/asm-arm/arch-imx/imx-dma.h b/arch/arm/mach-imx/include/mach/imx-dma.h
index 44d89c35539a..44d89c35539a 100644
--- a/include/asm-arm/arch-imx/imx-dma.h
+++ b/arch/arm/mach-imx/include/mach/imx-dma.h
diff --git a/include/asm-arm/arch-imx/imx-regs.h b/arch/arm/mach-imx/include/mach/imx-regs.h
index fb9de2733879..fb9de2733879 100644
--- a/include/asm-arm/arch-imx/imx-regs.h
+++ b/arch/arm/mach-imx/include/mach/imx-regs.h
diff --git a/include/asm-arm/arch-imx/imx-uart.h b/arch/arm/mach-imx/include/mach/imx-uart.h
index d54eb1d48026..d54eb1d48026 100644
--- a/include/asm-arm/arch-imx/imx-uart.h
+++ b/arch/arm/mach-imx/include/mach/imx-uart.h
diff --git a/include/asm-arm/arch-imx/imxfb.h b/arch/arm/mach-imx/include/mach/imxfb.h
index 3ed9ec8b9f00..3ed9ec8b9f00 100644
--- a/include/asm-arm/arch-imx/imxfb.h
+++ b/arch/arm/mach-imx/include/mach/imxfb.h
diff --git a/arch/arm/mach-imx/include/mach/io.h b/arch/arm/mach-imx/include/mach/io.h
new file mode 100644
index 000000000000..c50c5fa6fb81
--- /dev/null
+++ b/arch/arm/mach-imx/include/mach/io.h
@@ -0,0 +1,30 @@
+/*
+ *  arch/arm/mach-imxads/include/mach/io.h
+ *
+ *  Copyright (C) 1999 ARM Limited
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#ifndef __ASM_ARM_ARCH_IO_H
+#define __ASM_ARM_ARCH_IO_H
+
+#include <mach/hardware.h>
+
+#define IO_SPACE_LIMIT 0xffffffff
+
+#define __io(a)		((void __iomem *)(a))
+#define __mem_pci(a)	(a)
+
+#endif
diff --git a/arch/arm/mach-imx/include/mach/irqs.h b/arch/arm/mach-imx/include/mach/irqs.h
new file mode 100644
index 000000000000..eb8d5bd05d56
--- /dev/null
+++ b/arch/arm/mach-imx/include/mach/irqs.h
@@ -0,0 +1,116 @@
+/*
+ *  arch/arm/mach-imxads/include/mach/irqs.h
+ *
+ *  Copyright (C) 1999 ARM Limited
+ *  Copyright (C) 2000 Deep Blue Solutions Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#ifndef __ARM_IRQS_H__
+#define __ARM_IRQS_H__
+
+/* Use the imx definitions */
+#include <mach/hardware.h>
+
+/*
+ *  IMX Interrupt numbers
+ *
+ */
+#define INT_SOFTINT                 0
+#define CSI_INT                     6
+#define DSPA_MAC_INT                7
+#define DSPA_INT                    8
+#define COMP_INT                    9
+#define MSHC_XINT                   10
+#define GPIO_INT_PORTA              11
+#define GPIO_INT_PORTB              12
+#define GPIO_INT_PORTC              13
+#define LCDC_INT                    14
+#define SIM_INT                     15
+#define SIM_DATA_INT                16
+#define RTC_INT                     17
+#define RTC_SAMINT                  18
+#define UART2_MINT_PFERR            19
+#define UART2_MINT_RTS              20
+#define UART2_MINT_DTR              21
+#define UART2_MINT_UARTC            22
+#define UART2_MINT_TX               23
+#define UART2_MINT_RX               24
+#define UART1_MINT_PFERR            25
+#define UART1_MINT_RTS              26
+#define UART1_MINT_DTR              27
+#define UART1_MINT_UARTC            28
+#define UART1_MINT_TX               29
+#define UART1_MINT_RX               30
+#define VOICE_DAC_INT               31
+#define VOICE_ADC_INT               32
+#define PEN_DATA_INT                33
+#define PWM_INT                     34
+#define SDHC_INT                    35
+#define I2C_INT                     39
+#define CSPI_INT                    41
+#define SSI_TX_INT                  42
+#define SSI_TX_ERR_INT              43
+#define SSI_RX_INT                  44
+#define SSI_RX_ERR_INT              45
+#define TOUCH_INT                   46
+#define USBD_INT0                   47
+#define USBD_INT1                   48
+#define USBD_INT2                   49
+#define USBD_INT3                   50
+#define USBD_INT4                   51
+#define USBD_INT5                   52
+#define USBD_INT6                   53
+#define BTSYS_INT                   55
+#define BTTIM_INT                   56
+#define BTWUI_INT                   57
+#define TIM2_INT                    58
+#define TIM1_INT                    59
+#define DMA_ERR                     60
+#define DMA_INT                     61
+#define GPIO_INT_PORTD              62
+
+#define IMX_IRQS                         (64)
+
+/* note: the IMX has four gpio ports (A-D), but only
+ *       the following pins are connected to the outside
+ *       world:
+ *
+ * PORT A: bits 0-31
+ * PORT B: bits 8-31
+ * PORT C: bits 3-17
+ * PORT D: bits 6-31
+ *
+ * We map these interrupts straight on. As a result we have
+ * several holes in the interrupt mapping. We do this for two
+ * reasons:
+ *   - mapping the interrupts without holes would get
+ *     far more complicated
+ *   - Motorola could well decide to bring some processor
+ *     with more pins connected
+ */
+
+#define IRQ_GPIOA(x)  (IMX_IRQS + x)
+#define IRQ_GPIOB(x)  (IRQ_GPIOA(32) + x)
+#define IRQ_GPIOC(x)  (IRQ_GPIOB(32) + x)
+#define IRQ_GPIOD(x)  (IRQ_GPIOC(32) + x)
+
+/* decode irq number to use with IMR(x), ISR(x) and friends */
+#define IRQ_TO_REG(irq) ((irq - IMX_IRQS) >> 5)
+
+#define NR_IRQS (IRQ_GPIOD(32) + 1)
+#define IRQ_GPIO(x)
+#endif
diff --git a/arch/arm/mach-imx/include/mach/memory.h b/arch/arm/mach-imx/include/mach/memory.h
new file mode 100644
index 000000000000..5c453063c0ed
--- /dev/null
+++ b/arch/arm/mach-imx/include/mach/memory.h
@@ -0,0 +1,36 @@
+/*
+ *  arch/arm/mach-imx/include/mach/memory.h
+ *
+ *  Copyright (C) 1999 ARM Limited
+ *  Copyright (C) 2002 Shane Nay (shane@minirl.com)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#ifndef __ASM_ARCH_MMU_H
+#define __ASM_ARCH_MMU_H
+
+#define PHYS_OFFSET	UL(0x08000000)
+
+/*
+ * Virtual view <-> DMA view memory address translations
+ * virt_to_bus: Used to translate the virtual address to an
+ *              address suitable to be passed to set_dma_addr
+ * bus_to_virt: Used to convert an address for DMA operations
+ *              to an address that the kernel can use.
+ */
+#define __virt_to_bus(x)	(x - PAGE_OFFSET + PHYS_OFFSET)
+#define __bus_to_virt(x)	(x - PHYS_OFFSET + PAGE_OFFSET)
+
+#endif
diff --git a/include/asm-arm/arch-imx/mmc.h b/arch/arm/mach-imx/include/mach/mmc.h
index 4712f354dcca..4712f354dcca 100644
--- a/include/asm-arm/arch-imx/mmc.h
+++ b/arch/arm/mach-imx/include/mach/mmc.h
diff --git a/include/asm-arm/arch-imx/mx1ads.h b/arch/arm/mach-imx/include/mach/mx1ads.h
index d90fa4b49ce1..def05d510eb3 100644
--- a/include/asm-arm/arch-imx/mx1ads.h
+++ b/arch/arm/mach-imx/include/mach/mx1ads.h
@@ -1,5 +1,5 @@
 /*
- * linux/include/asm-arm/arch-imx/mx1ads.h
+ * arch/arm/mach-imx/include/mach/mx1ads.h
  *
  * Copyright (C) 2004 Robert Schwebel, Pengutronix
  *
diff --git a/include/asm-arm/arch-imx/spi_imx.h b/arch/arm/mach-imx/include/mach/spi_imx.h
index 2165449e976e..4186430feecf 100644
--- a/include/asm-arm/arch-imx/spi_imx.h
+++ b/arch/arm/mach-imx/include/mach/spi_imx.h
@@ -1,11 +1,11 @@
 /*
- * include/asm-arm/arch-imx/spi_imx.h
+ * arch/arm/mach-imx/include/mach/spi_imx.h
  *
  * Copyright (C) 2006 SWAPP
  *	Andrea Paterniani <a.paterniani@swapp-eng.it>
  *
  * Initial version inspired by:
- *	linux-2.6.17-rc3-mm1/include/asm-arm/arch-pxa/pxa2xx_spi.h
+ *	linux-2.6.17-rc3-mm1/arch/arm/mach-pxa/include/mach/pxa2xx_spi.h
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
diff --git a/arch/arm/mach-imx/include/mach/system.h b/arch/arm/mach-imx/include/mach/system.h
new file mode 100644
index 000000000000..adee7e51bab2
--- /dev/null
+++ b/arch/arm/mach-imx/include/mach/system.h
@@ -0,0 +1,40 @@
+/*
+ *  arch/arm/mach-imxads/include/mach/system.h
+ *
+ *  Copyright (C) 1999 ARM Limited
+ *  Copyright (C) 2000 Deep Blue Solutions Ltd
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#ifndef __ASM_ARCH_SYSTEM_H
+#define __ASM_ARCH_SYSTEM_H
+
+static void
+arch_idle(void)
+{
+	/*
+	 * This should do all the clock switching
+	 * and wait for interrupt tricks
+	 */
+	cpu_do_idle();
+}
+
+static inline void
+arch_reset(char mode)
+{
+	cpu_reset(0);
+}
+
+#endif
diff --git a/include/asm-arm/arch-imx/timex.h b/arch/arm/mach-imx/include/mach/timex.h
index e22ba789546c..e22ba789546c 100644
--- a/include/asm-arm/arch-imx/timex.h
+++ b/arch/arm/mach-imx/include/mach/timex.h
diff --git a/arch/arm/mach-imx/include/mach/uncompress.h b/arch/arm/mach-imx/include/mach/uncompress.h
new file mode 100644
index 000000000000..70523e67a8f6
--- /dev/null
+++ b/arch/arm/mach-imx/include/mach/uncompress.h
@@ -0,0 +1,71 @@
+/*
+ *  arch/arm/mach-imxads/include/mach/uncompress.h
+ *
+ *
+ *
+ *  Copyright (C) 1999 ARM Limited
+ *  Copyright (C) Shane Nay (shane@minirl.com)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#define UART(x) (*(volatile unsigned long *)(serial_port + (x)))
+
+#define UART1_BASE 0x206000
+#define UART2_BASE 0x207000
+#define USR2 0x98
+#define USR2_TXFE (1<<14)
+#define TXR  0x40
+#define UCR1 0x80
+#define UCR1_UARTEN 1
+
+/*
+ * The following code assumes the serial port has already been
+ * initialized by the bootloader.  We search for the first enabled
+ * port in the most probable order.  If you didn't setup a port in
+ * your bootloader then nothing will appear (which might be desired).
+ *
+ * This does not append a newline
+ */
+static void putc(int c)
+{
+	unsigned long serial_port;
+
+	do {
+		serial_port = UART1_BASE;
+		if ( UART(UCR1) & UCR1_UARTEN )
+			break;
+		serial_port = UART2_BASE;
+		if ( UART(UCR1) & UCR1_UARTEN )
+			break;
+		return;
+	} while(0);
+
+	while (!(UART(USR2) & USR2_TXFE))
+		barrier();
+
+	UART(TXR) = c;
+}
+
+static inline void flush(void)
+{
+}
+
+/*
+ * nothing to do
+ */
+#define arch_decomp_setup()
+
+#define arch_decomp_wdog()
diff --git a/arch/arm/mach-imx/include/mach/vmalloc.h b/arch/arm/mach-imx/include/mach/vmalloc.h
new file mode 100644
index 000000000000..7d7cb0bde3e8
--- /dev/null
+++ b/arch/arm/mach-imx/include/mach/vmalloc.h
@@ -0,0 +1,20 @@
+/*
+ *  arch/arm/mach-imx/include/mach/vmalloc.h
+ *
+ *  Copyright (C) 2000 Russell King.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#define VMALLOC_END       (PAGE_OFFSET + 0x10000000)
diff --git a/arch/arm/mach-imx/irq.c b/arch/arm/mach-imx/irq.c
index e6695c4e623b..798f221eb3b7 100644
--- a/arch/arm/mach-imx/irq.c
+++ b/arch/arm/mach-imx/irq.c
@@ -27,7 +27,7 @@
 #include <linux/list.h>
 #include <linux/timer.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/irq.h>
 #include <asm/io.h>
 
@@ -111,7 +111,7 @@ imx_gpio_irq_type(unsigned int _irq, unsigned int type)
 	reg = irq >> 5;
 	bit = 1 << (irq % 32);
 
-	if (type == IRQT_PROBE) {
+	if (type == IRQ_TYPE_PROBE) {
 		/* Don't mess with enabled GPIOs using preconfigured edges or
 		   GPIOs set to alternate function during probe */
 		/* TODO: support probe */
@@ -120,7 +120,7 @@ imx_gpio_irq_type(unsigned int _irq, unsigned int type)
 //                      return 0;
 //              if (GAFR(gpio) & (0x3 << (((gpio) & 0xf)*2)))
 //                      return 0;
-//              type = __IRQT_RISEDGE | __IRQT_FALEDGE;
+//              type = IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING;
 	}
 
 	GIUS(reg) |= bit;
@@ -128,19 +128,19 @@ imx_gpio_irq_type(unsigned int _irq, unsigned int type)
 
 	DEBUG_IRQ("setting type of irq %d to ", _irq);
 
-	if (type & __IRQT_RISEDGE) {
+	if (type & IRQ_TYPE_EDGE_RISING) {
 		DEBUG_IRQ("rising edges\n");
 		irq_type = 0x0;
 	}
-	if (type & __IRQT_FALEDGE) {
+	if (type & IRQ_TYPE_EDGE_FALLING) {
 		DEBUG_IRQ("falling edges\n");
 		irq_type = 0x1;
 	}
-	if (type & __IRQT_LOWLVL) {
+	if (type & IRQ_TYPE_LEVEL_LOW) {
 		DEBUG_IRQ("low level\n");
 		irq_type = 0x3;
 	}
-	if (type & __IRQT_HIGHLVL) {
+	if (type & IRQ_TYPE_LEVEL_HIGH) {
 		DEBUG_IRQ("high level\n");
 		irq_type = 0x2;
 	}
diff --git a/arch/arm/mach-imx/leds-mx1ads.c b/arch/arm/mach-imx/leds-mx1ads.c
index 79236404aec2..af81621f689b 100644
--- a/arch/arm/mach-imx/leds-mx1ads.c
+++ b/arch/arm/mach-imx/leds-mx1ads.c
@@ -13,7 +13,7 @@
 
 #include <linux/kernel.h>
 #include <linux/init.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/system.h>
 #include <asm/io.h>
 #include <asm/leds.h>
diff --git a/arch/arm/mach-imx/mx1ads.c b/arch/arm/mach-imx/mx1ads.c
index 9635d5812bcd..87fa1ff43b0b 100644
--- a/arch/arm/mach-imx/mx1ads.c
+++ b/arch/arm/mach-imx/mx1ads.c
@@ -16,7 +16,7 @@
 #include <linux/init.h>
 #include <linux/platform_device.h>
 #include <asm/system.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/irq.h>
 #include <asm/pgtable.h>
 #include <asm/page.h>
@@ -25,8 +25,8 @@
 #include <asm/mach-types.h>
 
 #include <asm/mach/arch.h>
-#include <asm/arch/mmc.h>
-#include <asm/arch/imx-uart.h>
+#include <mach/mmc.h>
+#include <mach/imx-uart.h>
 #include <linux/interrupt.h>
 #include "generic.h"
 
@@ -125,7 +125,7 @@ static struct platform_device *devices[] __initdata = {
 	&imx_uart2_device,
 };
 
-#ifdef CONFIG_MMC_IMX
+#if defined(CONFIG_MMC_IMX) || defined(CONFIG_MMC_IMX_MODULE)
 static int mx1ads_mmc_card_present(struct device *dev)
 {
 	/* MMC/SD Card Detect is PB 20 on MX1ADS V1.0.7 */
@@ -143,7 +143,7 @@ mx1ads_init(void)
 #ifdef CONFIG_LEDS
 	imx_gpio_mode(GPIO_PORTA | GPIO_OUT | 2);
 #endif
-#ifdef CONFIG_MMC_IMX
+#if defined(CONFIG_MMC_IMX) || defined(CONFIG_MMC_IMX_MODULE)
 	/* SD/MMC card detect */
 	imx_gpio_mode(GPIO_PORTB | GPIO_GIUS | GPIO_IN | 20);
 	imx_set_mmc_info(&mx1ads_mmc_info);
diff --git a/arch/arm/mach-imx/time.c b/arch/arm/mach-imx/time.c
index 5a41e96e8586..08be3875c59e 100644
--- a/arch/arm/mach-imx/time.c
+++ b/arch/arm/mach-imx/time.c
@@ -19,7 +19,7 @@
 #include <linux/clockchips.h>
 #include <linux/clk.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 #include <asm/leds.h>
 #include <asm/irq.h>
diff --git a/arch/arm/mach-integrator/core.c b/arch/arm/mach-integrator/core.c
index 7fbbc17f8e8b..8bacf6d4d097 100644
--- a/arch/arm/mach-integrator/core.c
+++ b/arch/arm/mach-integrator/core.c
@@ -20,11 +20,11 @@
 #include <linux/amba/bus.h>
 #include <linux/amba/serial.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/irq.h>
 #include <asm/io.h>
 #include <asm/hardware/arm_timer.h>
-#include <asm/arch/cm.h>
+#include <mach/cm.h>
 #include <asm/system.h>
 #include <asm/leds.h>
 #include <asm/mach/time.h>
diff --git a/arch/arm/mach-integrator/cpu.c b/arch/arm/mach-integrator/cpu.c
index 71c58bff304c..7c49d55e6b27 100644
--- a/arch/arm/mach-integrator/cpu.c
+++ b/arch/arm/mach-integrator/cpu.c
@@ -3,8 +3,6 @@
  *
  *  Copyright (C) 2001-2002 Deep Blue Solutions Ltd.
  *
- *  $Id: cpu.c,v 1.6 2002/07/18 13:58:51 rmk Exp $
- *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
@@ -20,7 +18,7 @@
 #include <linux/smp.h>
 #include <linux/init.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 #include <asm/mach-types.h>
 #include <asm/hardware/icst525.h>
diff --git a/arch/arm/mach-integrator/impd1.c b/arch/arm/mach-integrator/impd1.c
index 5a1588cf8242..3c8383dbe9e6 100644
--- a/arch/arm/mach-integrator/impd1.c
+++ b/arch/arm/mach-integrator/impd1.c
@@ -23,8 +23,8 @@
 
 #include <asm/io.h>
 #include <asm/hardware/icst525.h>
-#include <asm/arch/lm.h>
-#include <asm/arch/impd1.h>
+#include <mach/lm.h>
+#include <mach/impd1.h>
 #include <asm/sizes.h>
 
 #include "clock.h"
@@ -405,7 +405,7 @@ static int impd1_probe(struct lm_device *dev)
 
 		ret = amba_device_register(d, &dev->resource);
 		if (ret) {
-			dev_err(&d->dev, "unable to register device: %d\n");
+			dev_err(&d->dev, "unable to register device: %d\n", ret);
 			kfree(d);
 		}
 	}
diff --git a/include/asm-arm/arch-integrator/bits.h b/arch/arm/mach-integrator/include/mach/bits.h
index 09b024e0496a..09b024e0496a 100644
--- a/include/asm-arm/arch-integrator/bits.h
+++ b/arch/arm/mach-integrator/include/mach/bits.h
diff --git a/include/asm-arm/arch-integrator/cm.h b/arch/arm/mach-integrator/include/mach/cm.h
index 1ab353e23595..1ab353e23595 100644
--- a/include/asm-arm/arch-integrator/cm.h
+++ b/arch/arm/mach-integrator/include/mach/cm.h
diff --git a/arch/arm/mach-integrator/include/mach/debug-macro.S b/arch/arm/mach-integrator/include/mach/debug-macro.S
new file mode 100644
index 000000000000..d347d659ea30
--- /dev/null
+++ b/arch/arm/mach-integrator/include/mach/debug-macro.S
@@ -0,0 +1,22 @@
+/* arch/arm/mach-integrator/include/mach/debug-macro.S
+ *
+ * Debugging macro include header
+ *
+ *  Copyright (C) 1994-1999 Russell King
+ *  Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+*/
+
+		.macro	addruart,rx
+		mrc	p15, 0, \rx, c1, c0
+		tst	\rx, #1			@ MMU enabled?
+		moveq	\rx, #0x16000000	@ physical base address
+		movne	\rx, #0xf0000000	@ virtual base
+		addne	\rx, \rx, #0x16000000 >> 4
+		.endm
+
+#include <asm/hardware/debug-pl01x.S>
diff --git a/arch/arm/mach-integrator/include/mach/dma.h b/arch/arm/mach-integrator/include/mach/dma.h
new file mode 100644
index 000000000000..fbebe85a2db7
--- /dev/null
+++ b/arch/arm/mach-integrator/include/mach/dma.h
@@ -0,0 +1,19 @@
+/*
+ *  arch/arm/mach-integrator/include/mach/dma.h
+ *
+ *  Copyright (C) 1997,1998 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
diff --git a/arch/arm/mach-integrator/include/mach/entry-macro.S b/arch/arm/mach-integrator/include/mach/entry-macro.S
new file mode 100644
index 000000000000..7649c57acb53
--- /dev/null
+++ b/arch/arm/mach-integrator/include/mach/entry-macro.S
@@ -0,0 +1,44 @@
+/*
+ * arch/arm/mach-integrator/include/mach/entry-macro.S
+ *
+ * Low-level IRQ helper macros for Integrator platforms
+ *
+ * This file is licensed under  the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+#include <mach/hardware.h>
+#include <mach/irqs.h>
+
+ 		.macro	disable_fiq
+		.endm
+
+		.macro  get_irqnr_preamble, base, tmp
+		.endm
+
+		.macro  arch_ret_to_user, tmp1, tmp2
+		.endm
+
+		.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
+/* FIXME: should not be using soo many LDRs here */
+		ldr	\base, =IO_ADDRESS(INTEGRATOR_IC_BASE)
+		mov	\irqnr, #IRQ_PIC_START
+		ldr	\irqstat, [\base, #IRQ_STATUS]		@ get masked status
+		ldr	\base, =IO_ADDRESS(INTEGRATOR_HDR_BASE)
+		teq	\irqstat, #0
+		ldreq	\irqstat, [\base, #(INTEGRATOR_HDR_IC_OFFSET+IRQ_STATUS)]
+		moveq	\irqnr, #IRQ_CIC_START
+
+1001:		tst	\irqstat, #15
+		bne	1002f
+		add	\irqnr, \irqnr, #4
+		movs	\irqstat, \irqstat, lsr #4
+		bne	1001b
+1002:		tst	\irqstat, #1
+		bne	1003f
+		add	\irqnr, \irqnr, #1
+		movs	\irqstat, \irqstat, lsr #1
+		bne	1002b
+1003:		/* EQ will be set if no irqs pending */
+		.endm
+
diff --git a/arch/arm/mach-integrator/include/mach/hardware.h b/arch/arm/mach-integrator/include/mach/hardware.h
new file mode 100644
index 000000000000..1251319ef9ae
--- /dev/null
+++ b/arch/arm/mach-integrator/include/mach/hardware.h
@@ -0,0 +1,48 @@
+/*
+ *  arch/arm/mach-integrator/include/mach/hardware.h
+ *
+ *  This file contains the hardware definitions of the Integrator.
+ *
+ *  Copyright (C) 1999 ARM Limited.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#ifndef __ASM_ARCH_HARDWARE_H
+#define __ASM_ARCH_HARDWARE_H
+
+#include <asm/sizes.h>
+#include <mach/platform.h>
+
+/*
+ * Where in virtual memory the IO devices (timers, system controllers
+ * and so on)
+ */
+#define IO_BASE			0xF0000000                 // VA of IO 
+#define IO_SIZE			0x0B000000                 // How much?
+#define IO_START		INTEGRATOR_HDR_BASE        // PA of IO
+
+#define PCIO_BASE		PCI_IO_VADDR
+#define PCIMEM_BASE		PCI_MEMORY_VADDR
+
+/* macro to get at IO space when running virtually */
+#define IO_ADDRESS(x) (((x) >> 4) + IO_BASE) 
+
+#define pcibios_assign_all_busses()	1
+
+#define PCIBIOS_MIN_IO		0x6000
+#define PCIBIOS_MIN_MEM 	0x00100000
+
+#endif
+
diff --git a/include/asm-arm/arch-integrator/impd1.h b/arch/arm/mach-integrator/include/mach/impd1.h
index d75de4b14237..d75de4b14237 100644
--- a/include/asm-arm/arch-integrator/impd1.h
+++ b/arch/arm/mach-integrator/include/mach/impd1.h
diff --git a/arch/arm/mach-integrator/include/mach/io.h b/arch/arm/mach-integrator/include/mach/io.h
new file mode 100644
index 000000000000..f21bb5493dd9
--- /dev/null
+++ b/arch/arm/mach-integrator/include/mach/io.h
@@ -0,0 +1,36 @@
+/*
+ *  arch/arm/mach-integrator/include/mach/io.h
+ *
+ *  Copyright (C) 1999 ARM Limited
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#ifndef __ASM_ARM_ARCH_IO_H
+#define __ASM_ARM_ARCH_IO_H
+
+#define IO_SPACE_LIMIT 0xffff
+
+/*
+ * WARNING: this has to mirror definitions in platform.h
+ */
+#define PCI_MEMORY_VADDR        0xe8000000
+#define PCI_CONFIG_VADDR        0xec000000
+#define PCI_V3_VADDR            0xed000000
+#define PCI_IO_VADDR            0xee000000
+
+#define __io(a)			((void __iomem *)(PCI_IO_VADDR + (a)))
+#define __mem_pci(a)		(a)
+
+#endif
diff --git a/arch/arm/mach-integrator/include/mach/irqs.h b/arch/arm/mach-integrator/include/mach/irqs.h
new file mode 100644
index 000000000000..1fbe6d190222
--- /dev/null
+++ b/arch/arm/mach-integrator/include/mach/irqs.h
@@ -0,0 +1,82 @@
+/*
+ *  arch/arm/mach-integrator/include/mach/irqs.h
+ *
+ *  Copyright (C) 1999 ARM Limited
+ *  Copyright (C) 2000 Deep Blue Solutions Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+/* 
+ *  Interrupt numbers
+ */
+#define IRQ_PIC_START			0
+#define IRQ_SOFTINT			0
+#define IRQ_UARTINT0			1
+#define IRQ_UARTINT1			2
+#define IRQ_KMIINT0			3
+#define IRQ_KMIINT1			4
+#define IRQ_TIMERINT0			5
+#define IRQ_TIMERINT1			6
+#define IRQ_TIMERINT2			7
+#define IRQ_RTCINT			8
+#define IRQ_AP_EXPINT0			9
+#define IRQ_AP_EXPINT1			10
+#define IRQ_AP_EXPINT2			11
+#define IRQ_AP_EXPINT3			12
+#define IRQ_AP_PCIINT0			13
+#define IRQ_AP_PCIINT1			14
+#define IRQ_AP_PCIINT2			15
+#define IRQ_AP_PCIINT3			16
+#define IRQ_AP_V3INT			17
+#define IRQ_AP_CPINT0			18
+#define IRQ_AP_CPINT1			19
+#define IRQ_AP_LBUSTIMEOUT 		20
+#define IRQ_AP_APCINT			21
+#define IRQ_CP_CLCDCINT			22
+#define IRQ_CP_MMCIINT0			23
+#define IRQ_CP_MMCIINT1			24
+#define IRQ_CP_AACIINT			25
+#define IRQ_CP_CPPLDINT			26
+#define IRQ_CP_ETHINT			27
+#define IRQ_CP_TSPENINT			28
+#define IRQ_PIC_END			31
+
+#define IRQ_CIC_START			32
+#define IRQ_CM_SOFTINT			32
+#define IRQ_CM_COMMRX			33
+#define IRQ_CM_COMMTX			34
+#define IRQ_CIC_END			34
+
+/*
+ * IntegratorCP only
+ */
+#define IRQ_SIC_START			35
+#define IRQ_SIC_CP_SOFTINT		35
+#define IRQ_SIC_CP_RI0			36
+#define IRQ_SIC_CP_RI1			37
+#define IRQ_SIC_CP_CARDIN		38
+#define IRQ_SIC_CP_LMINT0		39
+#define IRQ_SIC_CP_LMINT1		40
+#define IRQ_SIC_CP_LMINT2		41
+#define IRQ_SIC_CP_LMINT3		42
+#define IRQ_SIC_CP_LMINT4		43
+#define IRQ_SIC_CP_LMINT5		44
+#define IRQ_SIC_CP_LMINT6		45
+#define IRQ_SIC_CP_LMINT7		46
+#define IRQ_SIC_END			46
+
+#define NR_IRQS                         47
+
diff --git a/include/asm-arm/arch-integrator/lm.h b/arch/arm/mach-integrator/include/mach/lm.h
index 28186b6f2c09..28186b6f2c09 100644
--- a/include/asm-arm/arch-integrator/lm.h
+++ b/arch/arm/mach-integrator/include/mach/lm.h
diff --git a/arch/arm/mach-integrator/include/mach/memory.h b/arch/arm/mach-integrator/include/mach/memory.h
new file mode 100644
index 000000000000..be7e63c21d25
--- /dev/null
+++ b/arch/arm/mach-integrator/include/mach/memory.h
@@ -0,0 +1,39 @@
+/*
+ *  arch/arm/mach-integrator/include/mach/memory.h
+ *
+ *  Copyright (C) 1999 ARM Limited
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#ifndef __ASM_ARCH_MEMORY_H
+#define __ASM_ARCH_MEMORY_H
+
+/*
+ * Physical DRAM offset.
+ */
+#define PHYS_OFFSET	UL(0x00000000)
+#define BUS_OFFSET	UL(0x80000000)
+
+/*
+ * Virtual view <-> DMA view memory address translations
+ * virt_to_bus: Used to translate the virtual address to an
+ *              address suitable to be passed to set_dma_addr
+ * bus_to_virt: Used to convert an address for DMA operations
+ *              to an address that the kernel can use.
+ */
+#define __virt_to_bus(x)	(x - PAGE_OFFSET + BUS_OFFSET)
+#define __bus_to_virt(x)	(x - BUS_OFFSET + PAGE_OFFSET)
+
+#endif
diff --git a/arch/arm/mach-integrator/include/mach/platform.h b/arch/arm/mach-integrator/include/mach/platform.h
new file mode 100644
index 000000000000..028b87839c0f
--- /dev/null
+++ b/arch/arm/mach-integrator/include/mach/platform.h
@@ -0,0 +1,467 @@
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+/* DO NOT EDIT!! - this file automatically generated
+ *                 from .s file by awk -f s2h.awk
+ */
+/**************************************************************************
+ * * Copyright © ARM Limited 1998.  All rights reserved.
+ * ***********************************************************************/
+/* ************************************************************************
+ *
+ *   Integrator address map
+ *
+ * 	NOTE: This is a multi-hosted header file for use with uHAL and
+ * 	      supported debuggers.
+ *
+ * ***********************************************************************/
+
+#ifndef __address_h
+#define __address_h                     1
+
+/* ========================================================================
+ *  Integrator definitions
+ * ========================================================================
+ * ------------------------------------------------------------------------
+ *  Memory definitions
+ * ------------------------------------------------------------------------
+ *  Integrator memory map
+ *
+ */
+#define INTEGRATOR_BOOT_ROM_LO          0x00000000
+#define INTEGRATOR_BOOT_ROM_HI          0x20000000
+#define INTEGRATOR_BOOT_ROM_BASE        INTEGRATOR_BOOT_ROM_HI	 /*  Normal position */
+#define INTEGRATOR_BOOT_ROM_SIZE        SZ_512K
+
+/*
+ *  New Core Modules have different amounts of SSRAM, the amount of SSRAM
+ *  fitted can be found in HDR_STAT.
+ *
+ *  The symbol INTEGRATOR_SSRAM_SIZE is kept, however this now refers to
+ *  the minimum amount of SSRAM fitted on any core module.
+ *
+ *  New Core Modules also alias the SSRAM.
+ *
+ */
+#define INTEGRATOR_SSRAM_BASE           0x00000000
+#define INTEGRATOR_SSRAM_ALIAS_BASE     0x10800000
+#define INTEGRATOR_SSRAM_SIZE           SZ_256K
+
+#define INTEGRATOR_FLASH_BASE           0x24000000
+#define INTEGRATOR_FLASH_SIZE           SZ_32M
+
+#define INTEGRATOR_MBRD_SSRAM_BASE      0x28000000
+#define INTEGRATOR_MBRD_SSRAM_SIZE      SZ_512K
+
+/*
+ *  SDRAM is a SIMM therefore the size is not known.
+ *
+ */
+#define INTEGRATOR_SDRAM_BASE           0x00040000
+
+#define INTEGRATOR_SDRAM_ALIAS_BASE     0x80000000
+#define INTEGRATOR_HDR0_SDRAM_BASE      0x80000000
+#define INTEGRATOR_HDR1_SDRAM_BASE      0x90000000
+#define INTEGRATOR_HDR2_SDRAM_BASE      0xA0000000
+#define INTEGRATOR_HDR3_SDRAM_BASE      0xB0000000
+
+/*
+ *  Logic expansion modules
+ *
+ */
+#define INTEGRATOR_LOGIC_MODULES_BASE   0xC0000000
+#define INTEGRATOR_LOGIC_MODULE0_BASE   0xC0000000
+#define INTEGRATOR_LOGIC_MODULE1_BASE   0xD0000000
+#define INTEGRATOR_LOGIC_MODULE2_BASE   0xE0000000
+#define INTEGRATOR_LOGIC_MODULE3_BASE   0xF0000000
+
+/* ------------------------------------------------------------------------
+ *  Integrator header card registers
+ * ------------------------------------------------------------------------
+ *
+ */
+#define INTEGRATOR_HDR_ID_OFFSET        0x00
+#define INTEGRATOR_HDR_PROC_OFFSET      0x04
+#define INTEGRATOR_HDR_OSC_OFFSET       0x08
+#define INTEGRATOR_HDR_CTRL_OFFSET      0x0C
+#define INTEGRATOR_HDR_STAT_OFFSET      0x10
+#define INTEGRATOR_HDR_LOCK_OFFSET      0x14
+#define INTEGRATOR_HDR_SDRAM_OFFSET     0x20
+#define INTEGRATOR_HDR_INIT_OFFSET      0x24	 /*  CM9x6 */
+#define INTEGRATOR_HDR_IC_OFFSET        0x40
+#define INTEGRATOR_HDR_SPDBASE_OFFSET   0x100
+#define INTEGRATOR_HDR_SPDTOP_OFFSET    0x200
+
+#define INTEGRATOR_HDR_BASE             0x10000000
+#define INTEGRATOR_HDR_ID               (INTEGRATOR_HDR_BASE + INTEGRATOR_HDR_ID_OFFSET)
+#define INTEGRATOR_HDR_PROC             (INTEGRATOR_HDR_BASE + INTEGRATOR_HDR_PROC_OFFSET)
+#define INTEGRATOR_HDR_OSC              (INTEGRATOR_HDR_BASE + INTEGRATOR_HDR_OSC_OFFSET)
+#define INTEGRATOR_HDR_CTRL             (INTEGRATOR_HDR_BASE + INTEGRATOR_HDR_CTRL_OFFSET)
+#define INTEGRATOR_HDR_STAT             (INTEGRATOR_HDR_BASE + INTEGRATOR_HDR_STAT_OFFSET)
+#define INTEGRATOR_HDR_LOCK             (INTEGRATOR_HDR_BASE + INTEGRATOR_HDR_LOCK_OFFSET)
+#define INTEGRATOR_HDR_SDRAM            (INTEGRATOR_HDR_BASE + INTEGRATOR_HDR_SDRAM_OFFSET)
+#define INTEGRATOR_HDR_INIT             (INTEGRATOR_HDR_BASE + INTEGRATOR_HDR_INIT_OFFSET)
+#define INTEGRATOR_HDR_IC               (INTEGRATOR_HDR_BASE + INTEGRATOR_HDR_IC_OFFSET)
+#define INTEGRATOR_HDR_SPDBASE          (INTEGRATOR_HDR_BASE + INTEGRATOR_HDR_SPDBASE_OFFSET)
+#define INTEGRATOR_HDR_SPDTOP           (INTEGRATOR_HDR_BASE + INTEGRATOR_HDR_SPDTOP_OFFSET)
+
+#define INTEGRATOR_HDR_CTRL_LED         0x01
+#define INTEGRATOR_HDR_CTRL_MBRD_DETECH 0x02
+#define INTEGRATOR_HDR_CTRL_REMAP       0x04
+#define INTEGRATOR_HDR_CTRL_RESET       0x08
+#define INTEGRATOR_HDR_CTRL_HIGHVECTORS 0x10
+#define INTEGRATOR_HDR_CTRL_BIG_ENDIAN  0x20
+#define INTEGRATOR_HDR_CTRL_FASTBUS     0x40
+#define INTEGRATOR_HDR_CTRL_SYNC        0x80
+
+#define INTEGRATOR_HDR_OSC_CORE_10MHz   0x102
+#define INTEGRATOR_HDR_OSC_CORE_15MHz   0x107
+#define INTEGRATOR_HDR_OSC_CORE_20MHz   0x10C
+#define INTEGRATOR_HDR_OSC_CORE_25MHz   0x111
+#define INTEGRATOR_HDR_OSC_CORE_30MHz   0x116
+#define INTEGRATOR_HDR_OSC_CORE_35MHz   0x11B
+#define INTEGRATOR_HDR_OSC_CORE_40MHz   0x120
+#define INTEGRATOR_HDR_OSC_CORE_45MHz   0x125
+#define INTEGRATOR_HDR_OSC_CORE_50MHz   0x12A
+#define INTEGRATOR_HDR_OSC_CORE_55MHz   0x12F
+#define INTEGRATOR_HDR_OSC_CORE_60MHz   0x134
+#define INTEGRATOR_HDR_OSC_CORE_65MHz   0x139
+#define INTEGRATOR_HDR_OSC_CORE_70MHz   0x13E
+#define INTEGRATOR_HDR_OSC_CORE_75MHz   0x143
+#define INTEGRATOR_HDR_OSC_CORE_80MHz   0x148
+#define INTEGRATOR_HDR_OSC_CORE_85MHz   0x14D
+#define INTEGRATOR_HDR_OSC_CORE_90MHz   0x152
+#define INTEGRATOR_HDR_OSC_CORE_95MHz   0x157
+#define INTEGRATOR_HDR_OSC_CORE_100MHz  0x15C
+#define INTEGRATOR_HDR_OSC_CORE_105MHz  0x161
+#define INTEGRATOR_HDR_OSC_CORE_110MHz  0x166
+#define INTEGRATOR_HDR_OSC_CORE_115MHz  0x16B
+#define INTEGRATOR_HDR_OSC_CORE_120MHz  0x170
+#define INTEGRATOR_HDR_OSC_CORE_125MHz  0x175
+#define INTEGRATOR_HDR_OSC_CORE_130MHz  0x17A
+#define INTEGRATOR_HDR_OSC_CORE_135MHz  0x17F
+#define INTEGRATOR_HDR_OSC_CORE_140MHz  0x184
+#define INTEGRATOR_HDR_OSC_CORE_145MHz  0x189
+#define INTEGRATOR_HDR_OSC_CORE_150MHz  0x18E
+#define INTEGRATOR_HDR_OSC_CORE_155MHz  0x193
+#define INTEGRATOR_HDR_OSC_CORE_160MHz  0x198
+#define INTEGRATOR_HDR_OSC_CORE_MASK    0x7FF
+
+#define INTEGRATOR_HDR_OSC_MEM_10MHz    0x10C000
+#define INTEGRATOR_HDR_OSC_MEM_15MHz    0x116000
+#define INTEGRATOR_HDR_OSC_MEM_20MHz    0x120000
+#define INTEGRATOR_HDR_OSC_MEM_25MHz    0x12A000
+#define INTEGRATOR_HDR_OSC_MEM_30MHz    0x134000
+#define INTEGRATOR_HDR_OSC_MEM_33MHz    0x13A000
+#define INTEGRATOR_HDR_OSC_MEM_40MHz    0x148000
+#define INTEGRATOR_HDR_OSC_MEM_50MHz    0x15C000
+#define INTEGRATOR_HDR_OSC_MEM_60MHz    0x170000
+#define INTEGRATOR_HDR_OSC_MEM_66MHz    0x17C000
+#define INTEGRATOR_HDR_OSC_MEM_MASK     0x7FF000
+
+#define INTEGRATOR_HDR_OSC_BUS_MODE_CM7x0  0x0
+#define INTEGRATOR_HDR_OSC_BUS_MODE_CM9x0  0x0800000
+#define INTEGRATOR_HDR_OSC_BUS_MODE_CM9x6  0x1000000
+#define INTEGRATOR_HDR_OSC_BUS_MODE_CM10x00  0x1800000
+#define INTEGRATOR_HDR_OSC_BUS_MODE_MASK  0x1800000
+
+#define INTEGRATOR_HDR_SDRAM_SPD_OK     (1 << 5)
+
+
+/* ------------------------------------------------------------------------
+ *  Integrator system registers
+ * ------------------------------------------------------------------------
+ *
+ */
+
+/*
+ *  System Controller
+ *
+ */
+#define INTEGRATOR_SC_ID_OFFSET         0x00
+#define INTEGRATOR_SC_OSC_OFFSET        0x04
+#define INTEGRATOR_SC_CTRLS_OFFSET      0x08
+#define INTEGRATOR_SC_CTRLC_OFFSET      0x0C
+#define INTEGRATOR_SC_DEC_OFFSET        0x10
+#define INTEGRATOR_SC_ARB_OFFSET        0x14
+#define INTEGRATOR_SC_PCIENABLE_OFFSET  0x18
+#define INTEGRATOR_SC_LOCK_OFFSET       0x1C
+
+#define INTEGRATOR_SC_BASE              0x11000000
+#define INTEGRATOR_SC_ID                (INTEGRATOR_SC_BASE + INTEGRATOR_SC_ID_OFFSET)
+#define INTEGRATOR_SC_OSC               (INTEGRATOR_SC_BASE + INTEGRATOR_SC_OSC_OFFSET)
+#define INTEGRATOR_SC_CTRLS             (INTEGRATOR_SC_BASE + INTEGRATOR_SC_CTRLS_OFFSET)
+#define INTEGRATOR_SC_CTRLC             (INTEGRATOR_SC_BASE + INTEGRATOR_SC_CTRLC_OFFSET)
+#define INTEGRATOR_SC_DEC               (INTEGRATOR_SC_BASE + INTEGRATOR_SC_DEC_OFFSET)
+#define INTEGRATOR_SC_ARB               (INTEGRATOR_SC_BASE + INTEGRATOR_SC_ARB_OFFSET)
+#define INTEGRATOR_SC_PCIENABLE         (INTEGRATOR_SC_BASE + INTEGRATOR_SC_PCIENABLE_OFFSET)
+#define INTEGRATOR_SC_LOCK              (INTEGRATOR_SC_BASE + INTEGRATOR_SC_LOCK_OFFSET)
+
+#define INTEGRATOR_SC_OSC_SYS_10MHz     0x20
+#define INTEGRATOR_SC_OSC_SYS_15MHz     0x34
+#define INTEGRATOR_SC_OSC_SYS_20MHz     0x48
+#define INTEGRATOR_SC_OSC_SYS_25MHz     0x5C
+#define INTEGRATOR_SC_OSC_SYS_33MHz     0x7C
+#define INTEGRATOR_SC_OSC_SYS_MASK      0xFF
+
+#define INTEGRATOR_SC_OSC_PCI_25MHz     0x100
+#define INTEGRATOR_SC_OSC_PCI_33MHz     0x0
+#define INTEGRATOR_SC_OSC_PCI_MASK      0x100
+
+#define INTEGRATOR_SC_CTRL_SOFTRST      (1 << 0)
+#define INTEGRATOR_SC_CTRL_nFLVPPEN     (1 << 1)
+#define INTEGRATOR_SC_CTRL_nFLWP        (1 << 2)
+#define INTEGRATOR_SC_CTRL_URTS0        (1 << 4)
+#define INTEGRATOR_SC_CTRL_UDTR0        (1 << 5)
+#define INTEGRATOR_SC_CTRL_URTS1        (1 << 6)
+#define INTEGRATOR_SC_CTRL_UDTR1        (1 << 7)
+
+/*
+ *  External Bus Interface
+ *
+ */
+#define INTEGRATOR_EBI_BASE             0x12000000
+
+#define INTEGRATOR_EBI_CSR0_OFFSET      0x00
+#define INTEGRATOR_EBI_CSR1_OFFSET      0x04
+#define INTEGRATOR_EBI_CSR2_OFFSET      0x08
+#define INTEGRATOR_EBI_CSR3_OFFSET      0x0C
+#define INTEGRATOR_EBI_LOCK_OFFSET      0x20
+
+#define INTEGRATOR_EBI_CSR0             (INTEGRATOR_EBI_BASE + INTEGRATOR_EBI_CSR0_OFFSET)
+#define INTEGRATOR_EBI_CSR1             (INTEGRATOR_EBI_BASE + INTEGRATOR_EBI_CSR1_OFFSET)
+#define INTEGRATOR_EBI_CSR2             (INTEGRATOR_EBI_BASE + INTEGRATOR_EBI_CSR2_OFFSET)
+#define INTEGRATOR_EBI_CSR3             (INTEGRATOR_EBI_BASE + INTEGRATOR_EBI_CSR3_OFFSET)
+#define INTEGRATOR_EBI_LOCK             (INTEGRATOR_EBI_BASE + INTEGRATOR_EBI_LOCK_OFFSET)
+
+#define INTEGRATOR_EBI_8_BIT            0x00
+#define INTEGRATOR_EBI_16_BIT           0x01
+#define INTEGRATOR_EBI_32_BIT           0x02
+#define INTEGRATOR_EBI_WRITE_ENABLE     0x04
+#define INTEGRATOR_EBI_SYNC             0x08
+#define INTEGRATOR_EBI_WS_2             0x00
+#define INTEGRATOR_EBI_WS_3             0x10
+#define INTEGRATOR_EBI_WS_4             0x20
+#define INTEGRATOR_EBI_WS_5             0x30
+#define INTEGRATOR_EBI_WS_6             0x40
+#define INTEGRATOR_EBI_WS_7             0x50
+#define INTEGRATOR_EBI_WS_8             0x60
+#define INTEGRATOR_EBI_WS_9             0x70
+#define INTEGRATOR_EBI_WS_10            0x80
+#define INTEGRATOR_EBI_WS_11            0x90
+#define INTEGRATOR_EBI_WS_12            0xA0
+#define INTEGRATOR_EBI_WS_13            0xB0
+#define INTEGRATOR_EBI_WS_14            0xC0
+#define INTEGRATOR_EBI_WS_15            0xD0
+#define INTEGRATOR_EBI_WS_16            0xE0
+#define INTEGRATOR_EBI_WS_17            0xF0
+
+
+#define INTEGRATOR_CT_BASE              0x13000000	 /*  Counter/Timers */
+#define INTEGRATOR_IC_BASE              0x14000000	 /*  Interrupt Controller */
+#define INTEGRATOR_RTC_BASE             0x15000000	 /*  Real Time Clock */
+#define INTEGRATOR_UART0_BASE           0x16000000	 /*  UART 0 */
+#define INTEGRATOR_UART1_BASE           0x17000000	 /*  UART 1 */
+#define INTEGRATOR_KBD_BASE             0x18000000	 /*  Keyboard */
+#define INTEGRATOR_MOUSE_BASE           0x19000000	 /*  Mouse */
+
+/*
+ *  LED's & Switches
+ *
+ */
+#define INTEGRATOR_DBG_ALPHA_OFFSET     0x00
+#define INTEGRATOR_DBG_LEDS_OFFSET      0x04
+#define INTEGRATOR_DBG_SWITCH_OFFSET    0x08
+
+#define INTEGRATOR_DBG_BASE             0x1A000000
+#define INTEGRATOR_DBG_ALPHA            (INTEGRATOR_DBG_BASE + INTEGRATOR_DBG_ALPHA_OFFSET)
+#define INTEGRATOR_DBG_LEDS             (INTEGRATOR_DBG_BASE + INTEGRATOR_DBG_LEDS_OFFSET)
+#define INTEGRATOR_DBG_SWITCH           (INTEGRATOR_DBG_BASE + INTEGRATOR_DBG_SWITCH_OFFSET)
+
+
+#if defined(CONFIG_ARCH_INTEGRATOR_AP)
+#define INTEGRATOR_GPIO_BASE            0x1B000000	 /*  GPIO */
+#elif defined(CONFIG_ARCH_INTEGRATOR_CP)
+#define INTEGRATOR_GPIO_BASE            0xC9000000	 /*  GPIO */
+#endif
+
+/* ------------------------------------------------------------------------
+ *  KMI keyboard/mouse definitions
+ * ------------------------------------------------------------------------
+ */
+/* PS2 Keyboard interface */
+#define KMI0_BASE                       INTEGRATOR_KBD_BASE
+
+/* PS2 Mouse interface */
+#define KMI1_BASE                       INTEGRATOR_MOUSE_BASE
+
+/* KMI definitions are now in include/asm-arm/hardware/amba_kmi.h -- rmk */
+
+/* ------------------------------------------------------------------------
+ *  Where in the memory map does PCI live?
+ * ------------------------------------------------------------------------
+ *  This represents a fairly liberal usage of address space.  Even though
+ *  the V3 only has two windows (therefore we need to map stuff on the fly),
+ *  we maintain the same addresses, even if they're not mapped.
+ *
+ */
+#define PHYS_PCI_MEM_BASE               0x40000000   /* 512M to xxx */
+/*  unused 256M from A0000000-AFFFFFFF might be used for I2O ???
+ */
+#define PHYS_PCI_IO_BASE                0x60000000   /* 16M to xxx */
+/*  unused (128-16)M from B1000000-B7FFFFFF
+ */
+#define PHYS_PCI_CONFIG_BASE            0x61000000   /* 16M to xxx */
+/*  unused ((128-16)M - 64K) from XXX
+ */
+#define PHYS_PCI_V3_BASE                0x62000000
+
+#define PCI_DRAMSIZE                    INTEGRATOR_SSRAM_SIZE
+
+/* 'export' these to UHAL */
+#define UHAL_PCI_IO                     PCI_IO_BASE
+#define UHAL_PCI_MEM                    PCI_MEM_BASE
+#define UHAL_PCI_ALLOC_IO_BASE          0x00004000
+#define UHAL_PCI_ALLOC_MEM_BASE         PCI_MEM_BASE
+#define UHAL_PCI_MAX_SLOT               20
+
+/* ========================================================================
+ *  Start of uHAL definitions
+ * ========================================================================
+ */
+
+/* ------------------------------------------------------------------------
+ *  Integrator Interrupt Controllers
+ * ------------------------------------------------------------------------
+ *
+ *  Offsets from interrupt controller base
+ *
+ *  System Controller interrupt controller base is
+ *
+ * 	INTEGRATOR_IC_BASE + (header_number << 6)
+ *
+ *  Core Module interrupt controller base is
+ *
+ * 	INTEGRATOR_HDR_IC
+ *
+ */
+#define IRQ_STATUS                      0
+#define IRQ_RAW_STATUS                  0x04
+#define IRQ_ENABLE                      0x08
+#define IRQ_ENABLE_SET                  0x08
+#define IRQ_ENABLE_CLEAR                0x0C
+
+#define INT_SOFT_SET                    0x10
+#define INT_SOFT_CLEAR                  0x14
+
+#define FIQ_STATUS                      0x20
+#define FIQ_RAW_STATUS                  0x24
+#define FIQ_ENABLE                      0x28
+#define FIQ_ENABLE_SET                  0x28
+#define FIQ_ENABLE_CLEAR                0x2C
+
+
+/* ------------------------------------------------------------------------
+ *  Interrupts
+ * ------------------------------------------------------------------------
+ *
+ *
+ *  Each Core Module has two interrupts controllers, one on the core module
+ *  itself and one in the system controller on the motherboard.  The
+ *  READ_INT macro in target.s reads both interrupt controllers and returns
+ *  a 32 bit bitmask, bits 0 to 23 are interrupts from the system controller
+ *  and bits 24 to 31 are from the core module.
+ *
+ *  The following definitions relate to the bitmask returned by READ_INT.
+ *
+ */
+
+/* ------------------------------------------------------------------------
+ *  LED's - The header LED is not accessible via the uHAL API
+ * ------------------------------------------------------------------------
+ *
+ */
+#define GREEN_LED                       0x01
+#define YELLOW_LED                      0x02
+#define RED_LED                         0x04
+#define GREEN_LED_2                     0x08
+#define ALL_LEDS                        0x0F
+
+#define LED_BANK                        INTEGRATOR_DBG_LEDS
+
+/*
+ *  Memory definitions - run uHAL out of SSRAM.
+ *
+ */
+#define uHAL_MEMORY_SIZE                INTEGRATOR_SSRAM_SIZE
+
+/*
+ *  Application Flash
+ *
+ */
+#define FLASH_BASE                      INTEGRATOR_FLASH_BASE
+#define FLASH_SIZE                      INTEGRATOR_FLASH_SIZE
+#define FLASH_END                       (FLASH_BASE + FLASH_SIZE - 1)
+#define FLASH_BLOCK_SIZE                SZ_128K
+
+/*
+ *  Boot Flash
+ *
+ */
+#define EPROM_BASE                      INTEGRATOR_BOOT_ROM_HI
+#define EPROM_SIZE                      INTEGRATOR_BOOT_ROM_SIZE
+#define EPROM_END                       (EPROM_BASE + EPROM_SIZE - 1)
+
+/*
+ *  Clean base - dummy
+ *
+ */
+#define CLEAN_BASE                      EPROM_BASE
+
+/*
+ *  Timer definitions
+ *
+ *  Only use timer 1 & 2
+ *  (both run at 24MHz and will need the clock divider set to 16).
+ *
+ *  Timer 0 runs at bus frequency and therefore could vary and currently
+ *  uHAL can't handle that.
+ *
+ */
+
+#define INTEGRATOR_TIMER0_BASE          INTEGRATOR_CT_BASE
+#define INTEGRATOR_TIMER1_BASE          (INTEGRATOR_CT_BASE + 0x100)
+#define INTEGRATOR_TIMER2_BASE          (INTEGRATOR_CT_BASE + 0x200)
+
+#define MAX_TIMER                       2
+#define MAX_PERIOD                      699050
+#define TICKS_PER_uSEC                  24
+
+/*
+ *  These are useconds NOT ticks.
+ *
+ */
+#define mSEC_1                          1000
+#define mSEC_5                          (mSEC_1 * 5)
+#define mSEC_10                         (mSEC_1 * 10)
+#define mSEC_25                         (mSEC_1 * 25)
+#define SEC_1                           (mSEC_1 * 1000)
+
+#define INTEGRATOR_CSR_BASE             0x10000000
+#define INTEGRATOR_CSR_SIZE             0x10000000
+
+#endif
+
+/* 	END */
diff --git a/arch/arm/mach-integrator/include/mach/system.h b/arch/arm/mach-integrator/include/mach/system.h
new file mode 100644
index 000000000000..c485345c8c77
--- /dev/null
+++ b/arch/arm/mach-integrator/include/mach/system.h
@@ -0,0 +1,44 @@
+/*
+ *  arch/arm/mach-integrator/include/mach/system.h
+ *
+ *  Copyright (C) 1999 ARM Limited
+ *  Copyright (C) 2000 Deep Blue Solutions Ltd
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#ifndef __ASM_ARCH_SYSTEM_H
+#define __ASM_ARCH_SYSTEM_H
+
+#include <mach/cm.h>
+
+static inline void arch_idle(void)
+{
+	/*
+	 * This should do all the clock switching
+	 * and wait for interrupt tricks
+	 */
+	cpu_do_idle();
+}
+
+static inline void arch_reset(char mode)
+{
+	/*
+	 * To reset, we hit the on-board reset register
+	 * in the system FPGA
+	 */
+	cm_control(CM_CTRL_RESET, CM_CTRL_RESET);
+}
+
+#endif
diff --git a/arch/arm/mach-integrator/include/mach/timex.h b/arch/arm/mach-integrator/include/mach/timex.h
new file mode 100644
index 000000000000..1dcb42028c82
--- /dev/null
+++ b/arch/arm/mach-integrator/include/mach/timex.h
@@ -0,0 +1,26 @@
+/*
+ *  arch/arm/mach-integrator/include/mach/timex.h
+ *
+ *  Integrator architecture timex specifications
+ *
+ *  Copyright (C) 1999 ARM Limited
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+/*
+ * ??
+ */
+#define CLOCK_TICK_RATE		(50000000 / 16)
diff --git a/arch/arm/mach-integrator/include/mach/uncompress.h b/arch/arm/mach-integrator/include/mach/uncompress.h
new file mode 100644
index 000000000000..30452f00a164
--- /dev/null
+++ b/arch/arm/mach-integrator/include/mach/uncompress.h
@@ -0,0 +1,50 @@
+/*
+ *  arch/arm/mach-integrator/include/mach/uncompress.h
+ *
+ *  Copyright (C) 1999 ARM Limited
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#define AMBA_UART_DR	(*(volatile unsigned char *)0x16000000)
+#define AMBA_UART_LCRH	(*(volatile unsigned char *)0x16000008)
+#define AMBA_UART_LCRM	(*(volatile unsigned char *)0x1600000c)
+#define AMBA_UART_LCRL	(*(volatile unsigned char *)0x16000010)
+#define AMBA_UART_CR	(*(volatile unsigned char *)0x16000014)
+#define AMBA_UART_FR	(*(volatile unsigned char *)0x16000018)
+
+/*
+ * This does not append a newline
+ */
+static void putc(int c)
+{
+	while (AMBA_UART_FR & (1 << 5))
+		barrier();
+
+	AMBA_UART_DR = c;
+}
+
+static inline void flush(void)
+{
+	while (AMBA_UART_FR & (1 << 3))
+		barrier();
+}
+
+/*
+ * nothing to do
+ */
+#define arch_decomp_setup()
+
+#define arch_decomp_wdog()
diff --git a/arch/arm/mach-integrator/include/mach/vmalloc.h b/arch/arm/mach-integrator/include/mach/vmalloc.h
new file mode 100644
index 000000000000..e87ab0b37bdd
--- /dev/null
+++ b/arch/arm/mach-integrator/include/mach/vmalloc.h
@@ -0,0 +1,20 @@
+/*
+ *  arch/arm/mach-integrator/include/mach/vmalloc.h
+ *
+ *  Copyright (C) 2000 Russell King.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#define VMALLOC_END       (PAGE_OFFSET + 0x10000000)
diff --git a/arch/arm/mach-integrator/integrator_ap.c b/arch/arm/mach-integrator/integrator_ap.c
index df37e93c6fc9..6e472b5f8f26 100644
--- a/arch/arm/mach-integrator/integrator_ap.c
+++ b/arch/arm/mach-integrator/integrator_ap.c
@@ -28,14 +28,14 @@
 #include <linux/amba/bus.h>
 #include <linux/amba/kmi.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 #include <asm/irq.h>
 #include <asm/setup.h>
 #include <asm/param.h>		/* HZ */
 #include <asm/mach-types.h>
 
-#include <asm/arch/lm.h>
+#include <mach/lm.h>
 
 #include <asm/mach/arch.h>
 #include <asm/mach/flash.h>
diff --git a/arch/arm/mach-integrator/integrator_cp.c b/arch/arm/mach-integrator/integrator_cp.c
index 913f64b22405..6b99e9c258bd 100644
--- a/arch/arm/mach-integrator/integrator_cp.c
+++ b/arch/arm/mach-integrator/integrator_cp.c
@@ -20,15 +20,15 @@
 #include <linux/amba/kmi.h>
 #include <linux/amba/clcd.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 #include <asm/irq.h>
 #include <asm/setup.h>
 #include <asm/mach-types.h>
 #include <asm/hardware/icst525.h>
 
-#include <asm/arch/cm.h>
-#include <asm/arch/lm.h>
+#include <mach/cm.h>
+#include <mach/lm.h>
 
 #include <asm/mach/arch.h>
 #include <asm/mach/flash.h>
diff --git a/arch/arm/mach-integrator/leds.c b/arch/arm/mach-integrator/leds.c
index f1436e683b49..7bc6881434ec 100644
--- a/arch/arm/mach-integrator/leds.c
+++ b/arch/arm/mach-integrator/leds.c
@@ -25,12 +25,12 @@
 #include <linux/smp.h>
 #include <linux/spinlock.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 #include <asm/leds.h>
 #include <asm/system.h>
 #include <asm/mach-types.h>
-#include <asm/arch/cm.h>
+#include <mach/cm.h>
 
 static int saved_leds;
 
diff --git a/arch/arm/mach-integrator/lm.c b/arch/arm/mach-integrator/lm.c
index f939c5091405..f52c7af31eaa 100644
--- a/arch/arm/mach-integrator/lm.c
+++ b/arch/arm/mach-integrator/lm.c
@@ -12,7 +12,7 @@
 #include <linux/device.h>
 #include <linux/slab.h>
 
-#include <asm/arch/lm.h>
+#include <mach/lm.h>
 
 #define to_lm_device(d)	container_of(d, struct lm_device, dev)
 #define to_lm_driver(d)	container_of(d, struct lm_driver, drv)
diff --git a/arch/arm/mach-integrator/pci_v3.c b/arch/arm/mach-integrator/pci_v3.c
index c07f497000ca..9f2b1ea8fb20 100644
--- a/arch/arm/mach-integrator/pci_v3.c
+++ b/arch/arm/mach-integrator/pci_v3.c
@@ -28,7 +28,7 @@
 #include <linux/spinlock.h>
 #include <linux/init.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 #include <asm/irq.h>
 #include <asm/system.h>
diff --git a/include/asm-arm/arch-iop13xx/adma.h b/arch/arm/mach-iop13xx/include/mach/adma.h
index ef4f5da2029f..60019c8e6465 100644
--- a/include/asm-arm/arch-iop13xx/adma.h
+++ b/arch/arm/mach-iop13xx/include/mach/adma.h
@@ -19,7 +19,7 @@
 #define _ADMA_H
 #include <linux/types.h>
 #include <linux/io.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/hardware/iop_adma.h>
 
 #define ADMA_ACCR(chan)	(chan->mmr_base + 0x0)
diff --git a/arch/arm/mach-iop13xx/include/mach/debug-macro.S b/arch/arm/mach-iop13xx/include/mach/debug-macro.S
new file mode 100644
index 000000000000..9037d2e8557c
--- /dev/null
+++ b/arch/arm/mach-iop13xx/include/mach/debug-macro.S
@@ -0,0 +1,26 @@
+/*
+ * arch/arm/mach-iop13xx/include/mach/debug-macro.S
+ *
+ * Debugging macro include header
+ *
+ * Copyright (C) 1994-1999 Russell King
+ * Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+	.macro	addruart, rx
+	mrc	p15, 0, \rx, c1, c0
+	tst	\rx, #1			@ mmu enabled?
+	moveq	\rx, #0xff000000	@ physical
+	orreq	\rx, \rx, #0x00d80000
+	movne	\rx, #0xfe000000	@ virtual
+	orrne	\rx, \rx, #0x00e80000
+	orr	\rx, \rx, #0x00002300
+	orr	\rx, \rx, #0x00000040
+	.endm
+
+#define UART_SHIFT	2
+#include <asm/hardware/debug-8250.S>
diff --git a/include/asm-arm/arch-iop13xx/dma.h b/arch/arm/mach-iop13xx/include/mach/dma.h
index d79846fbb394..d79846fbb394 100644
--- a/include/asm-arm/arch-iop13xx/dma.h
+++ b/arch/arm/mach-iop13xx/include/mach/dma.h
diff --git a/include/asm-arm/arch-iop13xx/entry-macro.S b/arch/arm/mach-iop13xx/include/mach/entry-macro.S
index a624a7870c64..a624a7870c64 100644
--- a/include/asm-arm/arch-iop13xx/entry-macro.S
+++ b/arch/arm/mach-iop13xx/include/mach/entry-macro.S
diff --git a/include/asm-arm/arch-iop13xx/hardware.h b/arch/arm/mach-iop13xx/include/mach/hardware.h
index 8e1d56289846..8e1d56289846 100644
--- a/include/asm-arm/arch-iop13xx/hardware.h
+++ b/arch/arm/mach-iop13xx/include/mach/hardware.h
diff --git a/include/asm-arm/arch-iop13xx/io.h b/arch/arm/mach-iop13xx/include/mach/io.h
index a6e0f9e6ddcf..a6e0f9e6ddcf 100644
--- a/include/asm-arm/arch-iop13xx/io.h
+++ b/arch/arm/mach-iop13xx/include/mach/io.h
diff --git a/include/asm-arm/arch-iop13xx/iop13xx.h b/arch/arm/mach-iop13xx/include/mach/iop13xx.h
index 52b7fab7ef60..52b7fab7ef60 100644
--- a/include/asm-arm/arch-iop13xx/iop13xx.h
+++ b/arch/arm/mach-iop13xx/include/mach/iop13xx.h
diff --git a/include/asm-arm/arch-iop13xx/iq81340.h b/arch/arm/mach-iop13xx/include/mach/iq81340.h
index ba2cf931e9ce..ba2cf931e9ce 100644
--- a/include/asm-arm/arch-iop13xx/iq81340.h
+++ b/arch/arm/mach-iop13xx/include/mach/iq81340.h
diff --git a/include/asm-arm/arch-iop13xx/irqs.h b/arch/arm/mach-iop13xx/include/mach/irqs.h
index 054e7acb5bfa..054e7acb5bfa 100644
--- a/include/asm-arm/arch-iop13xx/irqs.h
+++ b/arch/arm/mach-iop13xx/include/mach/irqs.h
diff --git a/arch/arm/mach-iop13xx/include/mach/memory.h b/arch/arm/mach-iop13xx/include/mach/memory.h
new file mode 100644
index 000000000000..e8b59d8f1bb9
--- /dev/null
+++ b/arch/arm/mach-iop13xx/include/mach/memory.h
@@ -0,0 +1,64 @@
+#ifndef __ASM_ARCH_MEMORY_H
+#define __ASM_ARCH_MEMORY_H
+
+#include <mach/hardware.h>
+
+/*
+ * Physical DRAM offset.
+ */
+#define PHYS_OFFSET	UL(0x00000000)
+#define TASK_SIZE  	UL(0x3f000000)
+#define PAGE_OFFSET	UL(0x40000000)
+#define TASK_UNMAPPED_BASE ((TASK_SIZE + 0x01000000) / 3)
+
+#ifndef __ASSEMBLY__
+
+#if defined(CONFIG_ARCH_IOP13XX)
+#define IOP13XX_PMMR_V_START (IOP13XX_PMMR_VIRT_MEM_BASE)
+#define IOP13XX_PMMR_V_END   (IOP13XX_PMMR_VIRT_MEM_BASE + IOP13XX_PMMR_SIZE)
+#define IOP13XX_PMMR_P_START (IOP13XX_PMMR_PHYS_MEM_BASE)
+#define IOP13XX_PMMR_P_END   (IOP13XX_PMMR_PHYS_MEM_BASE + IOP13XX_PMMR_SIZE)
+
+/*
+ * Virtual view <-> PCI DMA view memory address translations
+ * virt_to_bus: Used to translate the virtual address to an
+ *		address suitable to be passed to set_dma_addr
+ * bus_to_virt: Used to convert an address for DMA operations
+ *		to an address that the kernel can use.
+ */
+
+/* RAM has 1:1 mapping on the PCIe/x Busses */
+#define __virt_to_bus(x)	(__virt_to_phys(x))
+#define __bus_to_virt(x)    (__phys_to_virt(x))
+
+#define virt_to_lbus(x) 					   \
+(( ((void*)(x) >= (void*)IOP13XX_PMMR_V_START) &&		   \
+((void*)(x) < (void*)IOP13XX_PMMR_V_END) ) ? 			   \
+((x) - IOP13XX_PMMR_VIRT_MEM_BASE + IOP13XX_PMMR_PHYS_MEM_BASE) : \
+((x) - PAGE_OFFSET + PHYS_OFFSET))
+
+#define lbus_to_virt(x)                                            \
+(( ((x) >= IOP13XX_PMMR_P_START) && ((x) < IOP13XX_PMMR_P_END) ) ? \
+((x) - IOP13XX_PMMR_PHYS_MEM_BASE + IOP13XX_PMMR_VIRT_MEM_BASE ) : \
+((x) - PHYS_OFFSET + PAGE_OFFSET))
+
+/* Device is an lbus device if it is on the platform bus of the IOP13XX */
+#define is_lbus_device(dev) (dev &&\
+			     (strncmp(dev->bus->name, "platform", 8) == 0))
+
+#define __arch_page_to_dma(dev, page)					\
+({is_lbus_device(dev) ? (dma_addr_t)virt_to_lbus(page_address(page)) : \
+(dma_addr_t)__virt_to_bus(page_address(page));})
+
+#define __arch_dma_to_virt(dev, addr) \
+({is_lbus_device(dev) ? lbus_to_virt(addr) : __bus_to_virt(addr);})
+
+#define __arch_virt_to_dma(dev, addr) \
+({is_lbus_device(dev) ? virt_to_lbus(addr) : __virt_to_bus(addr);})
+
+#endif /* CONFIG_ARCH_IOP13XX */
+#endif /* !ASSEMBLY */
+
+#define PFN_TO_NID(addr)	(0)
+
+#endif
diff --git a/include/asm-arm/arch-iop13xx/msi.h b/arch/arm/mach-iop13xx/include/mach/msi.h
index b80c5ae17e99..b80c5ae17e99 100644
--- a/include/asm-arm/arch-iop13xx/msi.h
+++ b/arch/arm/mach-iop13xx/include/mach/msi.h
diff --git a/arch/arm/mach-iop13xx/include/mach/pci.h b/arch/arm/mach-iop13xx/include/mach/pci.h
new file mode 100644
index 000000000000..17b5515af8b1
--- /dev/null
+++ b/arch/arm/mach-iop13xx/include/mach/pci.h
@@ -0,0 +1,57 @@
+#ifndef _IOP13XX_PCI_H_
+#define _IOP13XX_PCI_H_
+#include <mach/irqs.h>
+#include <asm/io.h>
+
+struct pci_sys_data;
+struct hw_pci;
+int iop13xx_pci_setup(int nr, struct pci_sys_data *sys);
+struct pci_bus *iop13xx_scan_bus(int nr, struct pci_sys_data *);
+void iop13xx_atu_select(struct hw_pci *plat_pci);
+void iop13xx_pci_init(void);
+void iop13xx_map_pci_memory(void);
+
+#define IOP_PCI_STATUS_ERROR (PCI_STATUS_PARITY |	     \
+			       PCI_STATUS_SIG_TARGET_ABORT | \
+			       PCI_STATUS_REC_TARGET_ABORT | \
+			       PCI_STATUS_REC_TARGET_ABORT | \
+			       PCI_STATUS_REC_MASTER_ABORT | \
+			       PCI_STATUS_SIG_SYSTEM_ERROR | \
+	 		       PCI_STATUS_DETECTED_PARITY)
+
+#define IOP13XX_ATUE_ATUISR_ERROR (IOP13XX_ATUE_STAT_HALT_ON_ERROR |  \
+				    IOP13XX_ATUE_STAT_ROOT_SYS_ERR |   \
+				    IOP13XX_ATUE_STAT_PCI_IFACE_ERR |  \
+				    IOP13XX_ATUE_STAT_ERR_COR |	       \
+				    IOP13XX_ATUE_STAT_ERR_UNCOR |      \
+				    IOP13XX_ATUE_STAT_CRS |	       \
+				    IOP13XX_ATUE_STAT_DET_PAR_ERR |    \
+				    IOP13XX_ATUE_STAT_EXT_REC_MABORT | \
+				    IOP13XX_ATUE_STAT_SIG_TABORT |     \
+				    IOP13XX_ATUE_STAT_EXT_REC_TABORT | \
+				    IOP13XX_ATUE_STAT_MASTER_DATA_PAR)
+
+#define IOP13XX_ATUX_ATUISR_ERROR (IOP13XX_ATUX_STAT_TX_SCEM |        \
+				    IOP13XX_ATUX_STAT_REC_SCEM |       \
+				    IOP13XX_ATUX_STAT_TX_SERR |	       \
+				    IOP13XX_ATUX_STAT_DET_PAR_ERR |    \
+				    IOP13XX_ATUX_STAT_INT_REC_MABORT | \
+				    IOP13XX_ATUX_STAT_REC_SERR |       \
+				    IOP13XX_ATUX_STAT_EXT_REC_MABORT | \
+				    IOP13XX_ATUX_STAT_EXT_REC_TABORT | \
+				    IOP13XX_ATUX_STAT_EXT_SIG_TABORT | \
+				    IOP13XX_ATUX_STAT_MASTER_DATA_PAR)
+
+/* PCI interrupts
+ */
+#define ATUX_INTA IRQ_IOP13XX_XINT0
+#define ATUX_INTB IRQ_IOP13XX_XINT1
+#define ATUX_INTC IRQ_IOP13XX_XINT2
+#define ATUX_INTD IRQ_IOP13XX_XINT3
+
+#define ATUE_INTA IRQ_IOP13XX_ATUE_IMA
+#define ATUE_INTB IRQ_IOP13XX_ATUE_IMB
+#define ATUE_INTC IRQ_IOP13XX_ATUE_IMC
+#define ATUE_INTD IRQ_IOP13XX_ATUE_IMD
+
+#endif /* _IOP13XX_PCI_H_ */
diff --git a/arch/arm/mach-iop13xx/include/mach/system.h b/arch/arm/mach-iop13xx/include/mach/system.h
new file mode 100644
index 000000000000..c7127f416e1f
--- /dev/null
+++ b/arch/arm/mach-iop13xx/include/mach/system.h
@@ -0,0 +1,27 @@
+/*
+ * arch/arm/mach-iop13xx/include/mach/system.h
+ *
+ *  Copyright (C) 2004 Intel Corp.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <mach/iop13xx.h>
+static inline void arch_idle(void)
+{
+	cpu_do_idle();
+}
+
+static inline void arch_reset(char mode)
+{
+	/*
+	 * Reset the internal bus (warning both cores are reset)
+	 */
+	write_wdtcr(IOP_WDTCR_EN_ARM);
+	write_wdtcr(IOP_WDTCR_EN);
+	write_wdtsr(IOP13XX_WDTSR_WRITE_EN | IOP13XX_WDTCR_IB_RESET);
+	write_wdtcr(0x1000);
+
+	for(;;);
+}
diff --git a/include/asm-arm/arch-iop13xx/time.h b/arch/arm/mach-iop13xx/include/mach/time.h
index 49213d9d7cad..49213d9d7cad 100644
--- a/include/asm-arm/arch-iop13xx/time.h
+++ b/arch/arm/mach-iop13xx/include/mach/time.h
diff --git a/arch/arm/mach-iop13xx/include/mach/timex.h b/arch/arm/mach-iop13xx/include/mach/timex.h
new file mode 100644
index 000000000000..5b1f1c8a8270
--- /dev/null
+++ b/arch/arm/mach-iop13xx/include/mach/timex.h
@@ -0,0 +1,3 @@
+#include <mach/hardware.h>
+
+#define CLOCK_TICK_RATE (100 * HZ)
diff --git a/arch/arm/mach-iop13xx/include/mach/uncompress.h b/arch/arm/mach-iop13xx/include/mach/uncompress.h
new file mode 100644
index 000000000000..fa4f80522fad
--- /dev/null
+++ b/arch/arm/mach-iop13xx/include/mach/uncompress.h
@@ -0,0 +1,23 @@
+#include <asm/types.h>
+#include <linux/serial_reg.h>
+#include <mach/hardware.h>
+
+#define UART_BASE ((volatile u32 *)IOP13XX_UART1_PHYS)
+#define TX_DONE (UART_LSR_TEMT | UART_LSR_THRE)
+
+static inline void putc(char c)
+{
+	while ((UART_BASE[UART_LSR] & TX_DONE) != TX_DONE)
+		barrier();
+	UART_BASE[UART_TX] = c;
+}
+
+static inline void flush(void)
+{
+}
+
+/*
+ * nothing to do
+ */
+#define arch_decomp_setup()
+#define arch_decomp_wdog()
diff --git a/include/asm-arm/arch-iop13xx/vmalloc.h b/arch/arm/mach-iop13xx/include/mach/vmalloc.h
index c53456740345..c53456740345 100644
--- a/include/asm-arm/arch-iop13xx/vmalloc.h
+++ b/arch/arm/mach-iop13xx/include/mach/vmalloc.h
diff --git a/arch/arm/mach-iop13xx/io.c b/arch/arm/mach-iop13xx/io.c
index 5b22fdeca52c..26cfa318142c 100644
--- a/arch/arm/mach-iop13xx/io.c
+++ b/arch/arm/mach-iop13xx/io.c
@@ -18,7 +18,7 @@
  */
 #include <linux/kernel.h>
 #include <linux/module.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 
 void * __iomem __iop13xx_io(unsigned long io_addr)
diff --git a/arch/arm/mach-iop13xx/iq81340mc.c b/arch/arm/mach-iop13xx/iq81340mc.c
index 77b24cd1d88d..5051c03d437c 100644
--- a/arch/arm/mach-iop13xx/iq81340mc.c
+++ b/arch/arm/mach-iop13xx/iq81340mc.c
@@ -18,14 +18,14 @@
  */
 #include <linux/pci.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/irq.h>
 #include <asm/mach/pci.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
-#include <asm/arch/pci.h>
+#include <mach/pci.h>
 #include <asm/mach/time.h>
-#include <asm/arch/time.h>
+#include <mach/time.h>
 
 extern int init_atu; /* Flag to select which ATU(s) to initialize / disable */
 
diff --git a/arch/arm/mach-iop13xx/iq81340sc.c b/arch/arm/mach-iop13xx/iq81340sc.c
index e8522b3b8163..bc443073a8e3 100644
--- a/arch/arm/mach-iop13xx/iq81340sc.c
+++ b/arch/arm/mach-iop13xx/iq81340sc.c
@@ -18,14 +18,14 @@
  */
 #include <linux/pci.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/irq.h>
 #include <asm/mach/pci.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
-#include <asm/arch/pci.h>
+#include <mach/pci.h>
 #include <asm/mach/time.h>
-#include <asm/arch/time.h>
+#include <mach/time.h>
 
 extern int init_atu;
 
diff --git a/arch/arm/mach-iop13xx/irq.c b/arch/arm/mach-iop13xx/irq.c
index 69f07b25b3c9..0d099ca87bdf 100644
--- a/arch/arm/mach-iop13xx/irq.c
+++ b/arch/arm/mach-iop13xx/irq.c
@@ -23,10 +23,9 @@
 #include <asm/uaccess.h>
 #include <asm/mach/irq.h>
 #include <asm/irq.h>
-#include <asm/hardware.h>
-#include <asm/mach-types.h>
-#include <asm/arch/irqs.h>
-#include <asm/arch/msi.h>
+#include <mach/hardware.h>
+#include <mach/irqs.h>
+#include <mach/msi.h>
 
 /* INTCTL0 CP6 R0 Page 4
  */
diff --git a/arch/arm/mach-iop13xx/pci.c b/arch/arm/mach-iop13xx/pci.c
index 7825c1aaa27b..673b0db22034 100644
--- a/arch/arm/mach-iop13xx/pci.c
+++ b/arch/arm/mach-iop13xx/pci.c
@@ -21,11 +21,11 @@
 #include <linux/delay.h>
 #include <linux/jiffies.h>
 #include <asm/irq.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/sizes.h>
 #include <asm/signal.h>
 #include <asm/mach/pci.h>
-#include <asm/arch/pci.h>
+#include <mach/pci.h>
 
 #define IOP13XX_PCI_DEBUG 0
 #define PRINTK(x...) ((void)(IOP13XX_PCI_DEBUG && printk(x)))
diff --git a/arch/arm/mach-iop13xx/setup.c b/arch/arm/mach-iop13xx/setup.c
index 246f6d478720..b17ccc8cb471 100644
--- a/arch/arm/mach-iop13xx/setup.c
+++ b/arch/arm/mach-iop13xx/setup.c
@@ -22,7 +22,7 @@
 #include <linux/mtd/physmap.h>
 #endif
 #include <asm/mach/map.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/irq.h>
 #include <asm/io.h>
 #include <asm/hardware/iop_adma.h>
diff --git a/arch/arm/mach-iop32x/em7210.c b/arch/arm/mach-iop32x/em7210.c
index 4877597c8758..3ad4696ade42 100644
--- a/arch/arm/mach-iop32x/em7210.c
+++ b/arch/arm/mach-iop32x/em7210.c
@@ -23,7 +23,7 @@
 #include <linux/mtd/physmap.h>
 #include <linux/platform_device.h>
 #include <linux/i2c.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <linux/io.h>
 #include <linux/irq.h>
 #include <asm/mach/arch.h>
@@ -31,7 +31,7 @@
 #include <asm/mach/pci.h>
 #include <asm/mach/time.h>
 #include <asm/mach-types.h>
-#include <asm/arch/time.h>
+#include <mach/time.h>
 
 static void __init em7210_timer_init(void)
 {
diff --git a/arch/arm/mach-iop32x/glantank.c b/arch/arm/mach-iop32x/glantank.c
index d4fca75ce542..45d61276d233 100644
--- a/arch/arm/mach-iop32x/glantank.c
+++ b/arch/arm/mach-iop32x/glantank.c
@@ -25,7 +25,7 @@
 #include <linux/mtd/physmap.h>
 #include <linux/i2c.h>
 #include <linux/platform_device.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 #include <asm/irq.h>
 #include <asm/mach/arch.h>
@@ -34,7 +34,7 @@
 #include <asm/mach/time.h>
 #include <asm/mach-types.h>
 #include <asm/page.h>
-#include <asm/arch/time.h>
+#include <mach/time.h>
 
 /*
  * GLAN Tank timer tick configuration.
diff --git a/include/asm-arm/arch-iop32x/adma.h b/arch/arm/mach-iop32x/include/mach/adma.h
index 5ed92037dd10..5ed92037dd10 100644
--- a/include/asm-arm/arch-iop32x/adma.h
+++ b/arch/arm/mach-iop32x/include/mach/adma.h
diff --git a/arch/arm/mach-iop32x/include/mach/debug-macro.S b/arch/arm/mach-iop32x/include/mach/debug-macro.S
new file mode 100644
index 000000000000..58b01664ffba
--- /dev/null
+++ b/arch/arm/mach-iop32x/include/mach/debug-macro.S
@@ -0,0 +1,20 @@
+/*
+ * arch/arm/mach-iop32x/include/mach/debug-macro.S
+ *
+ * Debugging macro include header
+ *
+ * Copyright (C) 1994-1999 Russell King
+ * Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+		.macro	addruart, rx
+		mov	\rx, #0xfe000000	@ physical as well as virtual
+		orr	\rx, \rx, #0x00800000	@ location of the UART
+		.endm
+
+#define UART_SHIFT	0
+#include <asm/hardware/debug-8250.S>
diff --git a/arch/arm/mach-iop32x/include/mach/dma.h b/arch/arm/mach-iop32x/include/mach/dma.h
new file mode 100644
index 000000000000..f8bd817f205d
--- /dev/null
+++ b/arch/arm/mach-iop32x/include/mach/dma.h
@@ -0,0 +1,9 @@
+/*
+ * arch/arm/mach-iop32x/include/mach/dma.h
+ *
+ * Copyright (C) 2004 Intel Corp.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
diff --git a/arch/arm/mach-iop32x/include/mach/entry-macro.S b/arch/arm/mach-iop32x/include/mach/entry-macro.S
new file mode 100644
index 000000000000..b02fb56bafcc
--- /dev/null
+++ b/arch/arm/mach-iop32x/include/mach/entry-macro.S
@@ -0,0 +1,36 @@
+/*
+ * arch/arm/mach-iop32x/include/mach/entry-macro.S
+ *
+ * Low-level IRQ helper macros for IOP32x-based platforms
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+#include <mach/iop32x.h>
+
+	.macro	disable_fiq
+	.endm
+
+	.macro get_irqnr_preamble, base, tmp
+	mrc	p15, 0, \tmp, c15, c1, 0
+	orr	\tmp, \tmp, #(1 << 6)
+	mcr	p15, 0, \tmp, c15, c1, 0	@ Enable cp6 access
+	mrc	p15, 0, \tmp, c15, c1, 0
+	mov	\tmp, \tmp
+	sub	pc, pc, #4			@ cp_wait
+	.endm
+
+	.macro  get_irqnr_and_base, irqnr, irqstat, base, tmp
+	mrc     p6, 0, \irqstat, c8, c0, 0	@ Read IINTSRC
+	cmp     \irqstat, #0
+	clzne   \irqnr, \irqstat
+	rsbne   \irqnr, \irqnr, #31
+	.endm
+
+	.macro arch_ret_to_user, tmp1, tmp2
+	mrc	p15, 0, \tmp1, c15, c1, 0
+	ands	\tmp2, \tmp1, #(1 << 6)
+	bicne	\tmp1, \tmp1, #(1 << 6)
+	mcrne	p15, 0, \tmp1, c15, c1, 0	@ Disable cp6 access
+	.endm
diff --git a/include/asm-arm/arch-iop32x/glantank.h b/arch/arm/mach-iop32x/include/mach/glantank.h
index bf0665acc1c1..958eb91c0913 100644
--- a/include/asm-arm/arch-iop32x/glantank.h
+++ b/arch/arm/mach-iop32x/include/mach/glantank.h
@@ -1,5 +1,5 @@
 /*
- * include/asm-arm/arch-iop32x/glantank.h
+ * arch/arm/mach-iop32x/include/mach/glantank.h
  *
  * IO-Data GLAN Tank board registers
  */
diff --git a/include/asm-arm/arch-iop32x/gpio.h b/arch/arm/mach-iop32x/include/mach/gpio.h
index 708f4ec9db1d..708f4ec9db1d 100644
--- a/include/asm-arm/arch-iop32x/gpio.h
+++ b/arch/arm/mach-iop32x/include/mach/gpio.h
diff --git a/arch/arm/mach-iop32x/include/mach/hardware.h b/arch/arm/mach-iop32x/include/mach/hardware.h
new file mode 100644
index 000000000000..d559c4e6095a
--- /dev/null
+++ b/arch/arm/mach-iop32x/include/mach/hardware.h
@@ -0,0 +1,44 @@
+/*
+ * arch/arm/mach-iop32x/include/mach/hardware.h
+ */
+
+#ifndef __HARDWARE_H
+#define __HARDWARE_H
+
+#include <asm/types.h>
+
+/*
+ * Note about PCI IO space mappings
+ *
+ * To make IO space accesses efficient, we store virtual addresses in
+ * the IO resources.
+ *
+ * The PCI IO space is located at virtual 0xfe000000 from physical
+ * 0x90000000. The PCI BARs must be programmed with physical addresses,
+ * but when we read them, we convert them to virtual addresses. See
+ * arch/arm/plat-iop/pci.c.
+ */
+#define pcibios_assign_all_busses() 1
+#define PCIBIOS_MIN_IO		0x00000000
+#define PCIBIOS_MIN_MEM		0x00000000
+
+#ifndef __ASSEMBLY__
+void iop32x_init_irq(void);
+#endif
+
+
+/*
+ * Generic chipset bits
+ */
+#include "iop32x.h"
+
+/*
+ * Board specific bits
+ */
+#include "glantank.h"
+#include "iq80321.h"
+#include "iq31244.h"
+#include "n2100.h"
+
+
+#endif
diff --git a/arch/arm/mach-iop32x/include/mach/io.h b/arch/arm/mach-iop32x/include/mach/io.h
new file mode 100644
index 000000000000..ce54705ba3d4
--- /dev/null
+++ b/arch/arm/mach-iop32x/include/mach/io.h
@@ -0,0 +1,27 @@
+/*
+ * arch/arm/mach-iop32x/include/mach/io.h
+ *
+ * Copyright (C) 2001 MontaVista Software, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __IO_H
+#define __IO_H
+
+#include <mach/hardware.h>
+
+extern void __iomem *__iop3xx_ioremap(unsigned long cookie, size_t size,
+	unsigned int mtype);
+extern void __iop3xx_iounmap(void __iomem *addr);
+
+#define IO_SPACE_LIMIT		0xffffffff
+#define __io(p)		((void __iomem *)IOP3XX_PCI_IO_PHYS_TO_VIRT(p))
+#define __mem_pci(a)		(a)
+
+#define __arch_ioremap(a, s, f) __iop3xx_ioremap(a, s, f)
+#define __arch_iounmap(a)	 __iop3xx_iounmap(a)
+
+#endif
diff --git a/include/asm-arm/arch-iop32x/iop32x.h b/arch/arm/mach-iop32x/include/mach/iop32x.h
index 0d8af57221a1..abd9eb49f103 100644
--- a/include/asm-arm/arch-iop32x/iop32x.h
+++ b/arch/arm/mach-iop32x/include/mach/iop32x.h
@@ -1,5 +1,5 @@
 /*
- * include/asm-arm/arch-iop32x/iop32x.h
+ * arch/arm/mach-iop32x/include/mach/iop32x.h
  *
  * Intel IOP32X Chip definitions
  *
diff --git a/include/asm-arm/arch-iop32x/iq31244.h b/arch/arm/mach-iop32x/include/mach/iq31244.h
index fff4eafa1f6b..6b6b369e781c 100644
--- a/include/asm-arm/arch-iop32x/iq31244.h
+++ b/arch/arm/mach-iop32x/include/mach/iq31244.h
@@ -1,5 +1,5 @@
 /*
- * include/asm-arm/arch-iop32x/iq31244.h
+ * arch/arm/mach-iop32x/include/mach/iq31244.h
  *
  * Intel IQ31244 evaluation board registers
  */
diff --git a/include/asm-arm/arch-iop32x/iq80321.h b/arch/arm/mach-iop32x/include/mach/iq80321.h
index eb69db9b9a06..498819b737e7 100644
--- a/include/asm-arm/arch-iop32x/iq80321.h
+++ b/arch/arm/mach-iop32x/include/mach/iq80321.h
@@ -1,5 +1,5 @@
 /*
- * include/asm-arm/arch-iop32x/iq80321.h
+ * arch/arm/mach-iop32x/include/mach/iq80321.h
  *
  * Intel IQ80321 evaluation board registers
  */
diff --git a/arch/arm/mach-iop32x/include/mach/irqs.h b/arch/arm/mach-iop32x/include/mach/irqs.h
new file mode 100644
index 000000000000..33573e09914c
--- /dev/null
+++ b/arch/arm/mach-iop32x/include/mach/irqs.h
@@ -0,0 +1,50 @@
+/*
+ * arch/arm/mach-iop32x/include/mach/irqs.h
+ *
+ * Author:	Rory Bolt <rorybolt@pacbell.net>
+ * Copyright:	(C) 2002 Rory Bolt
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __IRQS_H
+#define __IRQS_H
+
+/*
+ * IOP80321 chipset interrupts
+ */
+#define IRQ_IOP32X_DMA0_EOT	0
+#define IRQ_IOP32X_DMA0_EOC	1
+#define IRQ_IOP32X_DMA1_EOT	2
+#define IRQ_IOP32X_DMA1_EOC	3
+#define IRQ_IOP32X_AA_EOT	6
+#define IRQ_IOP32X_AA_EOC	7
+#define IRQ_IOP32X_CORE_PMON	8
+#define IRQ_IOP32X_TIMER0	9
+#define IRQ_IOP32X_TIMER1	10
+#define IRQ_IOP32X_I2C_0	11
+#define IRQ_IOP32X_I2C_1	12
+#define IRQ_IOP32X_MESSAGING	13
+#define IRQ_IOP32X_ATU_BIST	14
+#define IRQ_IOP32X_PERFMON	15
+#define IRQ_IOP32X_CORE_PMU	16
+#define IRQ_IOP32X_BIU_ERR	17
+#define IRQ_IOP32X_ATU_ERR	18
+#define IRQ_IOP32X_MCU_ERR	19
+#define IRQ_IOP32X_DMA0_ERR	20
+#define IRQ_IOP32X_DMA1_ERR	21
+#define IRQ_IOP32X_AA_ERR	23
+#define IRQ_IOP32X_MSG_ERR	24
+#define IRQ_IOP32X_SSP		25
+#define IRQ_IOP32X_XINT0	27
+#define IRQ_IOP32X_XINT1	28
+#define IRQ_IOP32X_XINT2	29
+#define IRQ_IOP32X_XINT3	30
+#define IRQ_IOP32X_HPI		31
+
+#define NR_IRQS			32
+
+
+#endif
diff --git a/arch/arm/mach-iop32x/include/mach/memory.h b/arch/arm/mach-iop32x/include/mach/memory.h
new file mode 100644
index 000000000000..42cd4bf3148c
--- /dev/null
+++ b/arch/arm/mach-iop32x/include/mach/memory.h
@@ -0,0 +1,26 @@
+/*
+ * arch/arm/mach-iop32x/include/mach/memory.h
+ */
+
+#ifndef __MEMORY_H
+#define __MEMORY_H
+
+#include <mach/hardware.h>
+
+/*
+ * Physical DRAM offset.
+ */
+#define PHYS_OFFSET	UL(0xa0000000)
+
+/*
+ * Virtual view <-> PCI DMA view memory address translations
+ * virt_to_bus: Used to translate the virtual address to an
+ *		address suitable to be passed to set_dma_addr
+ * bus_to_virt: Used to convert an address for DMA operations
+ *		to an address that the kernel can use.
+ */
+#define __virt_to_bus(x)	(__virt_to_phys(x))
+#define __bus_to_virt(x)	(__phys_to_virt(x))
+
+
+#endif
diff --git a/include/asm-arm/arch-iop32x/n2100.h b/arch/arm/mach-iop32x/include/mach/n2100.h
index 77a8af476629..40b8a532b064 100644
--- a/include/asm-arm/arch-iop32x/n2100.h
+++ b/arch/arm/mach-iop32x/include/mach/n2100.h
@@ -1,5 +1,5 @@
 /*
- * include/asm-arm/arch-iop32x/n2100.h
+ * arch/arm/mach-iop32x/include/mach/n2100.h
  *
  * Thecus N2100 board registers
  */
diff --git a/arch/arm/mach-iop32x/include/mach/system.h b/arch/arm/mach-iop32x/include/mach/system.h
new file mode 100644
index 000000000000..20f923e54f46
--- /dev/null
+++ b/arch/arm/mach-iop32x/include/mach/system.h
@@ -0,0 +1,33 @@
+/*
+ * arch/arm/mach-iop32x/include/mach/system.h
+ *
+ * Copyright (C) 2001 MontaVista Software, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <asm/mach-types.h>
+
+static inline void arch_idle(void)
+{
+	cpu_do_idle();
+}
+
+static inline void arch_reset(char mode)
+{
+	local_irq_disable();
+
+	if (machine_is_n2100()) {
+		gpio_line_set(N2100_HARDWARE_RESET, GPIO_LOW);
+		gpio_line_config(N2100_HARDWARE_RESET, GPIO_OUT);
+		while (1)
+			;
+	}
+
+	*IOP3XX_PCSR = 0x30;
+
+	/* Jump into ROM at address 0 */
+	cpu_reset(0);
+}
diff --git a/include/asm-arm/arch-iop32x/time.h b/arch/arm/mach-iop32x/include/mach/time.h
index 0f28c9949623..0f28c9949623 100644
--- a/include/asm-arm/arch-iop32x/time.h
+++ b/arch/arm/mach-iop32x/include/mach/time.h
diff --git a/arch/arm/mach-iop32x/include/mach/timex.h b/arch/arm/mach-iop32x/include/mach/timex.h
new file mode 100644
index 000000000000..a541afced3cb
--- /dev/null
+++ b/arch/arm/mach-iop32x/include/mach/timex.h
@@ -0,0 +1,9 @@
+/*
+ * arch/arm/mach-iop32x/include/mach/timex.h
+ *
+ * IOP32x architecture timex specifications
+ */
+
+#include <mach/hardware.h>
+
+#define CLOCK_TICK_RATE		(100 * HZ)
diff --git a/arch/arm/mach-iop32x/include/mach/uncompress.h b/arch/arm/mach-iop32x/include/mach/uncompress.h
new file mode 100644
index 000000000000..b247551b6f5a
--- /dev/null
+++ b/arch/arm/mach-iop32x/include/mach/uncompress.h
@@ -0,0 +1,39 @@
+/*
+ * arch/arm/mach-iop32x/include/mach/uncompress.h
+ */
+
+#include <asm/types.h>
+#include <asm/mach-types.h>
+#include <linux/serial_reg.h>
+#include <mach/hardware.h>
+
+static volatile u8 *uart_base;
+
+#define TX_DONE		(UART_LSR_TEMT | UART_LSR_THRE)
+
+static inline void putc(char c)
+{
+	while ((uart_base[UART_LSR] & TX_DONE) != TX_DONE)
+		barrier();
+	uart_base[UART_TX] = c;
+}
+
+static inline void flush(void)
+{
+}
+
+static __inline__ void __arch_decomp_setup(unsigned long arch_id)
+{
+	if (machine_is_iq80321())
+		uart_base = (volatile u8 *)IQ80321_UART;
+	else if (machine_is_iq31244() || machine_is_em7210())
+		uart_base = (volatile u8 *)IQ31244_UART;
+	else
+		uart_base = (volatile u8 *)0xfe800000;
+}
+
+/*
+ * nothing to do
+ */
+#define arch_decomp_setup()	__arch_decomp_setup(arch_id)
+#define arch_decomp_wdog()
diff --git a/arch/arm/mach-iop32x/include/mach/vmalloc.h b/arch/arm/mach-iop32x/include/mach/vmalloc.h
new file mode 100644
index 000000000000..85ceb09d85f0
--- /dev/null
+++ b/arch/arm/mach-iop32x/include/mach/vmalloc.h
@@ -0,0 +1,5 @@
+/*
+ * arch/arm/mach-iop32x/include/mach/vmalloc.h
+ */
+
+#define VMALLOC_END	0xfe000000
diff --git a/arch/arm/mach-iop32x/iq31244.c b/arch/arm/mach-iop32x/iq31244.c
index 4a89823bcebb..082818aaa205 100644
--- a/arch/arm/mach-iop32x/iq31244.c
+++ b/arch/arm/mach-iop32x/iq31244.c
@@ -26,7 +26,7 @@
 #include <linux/serial_8250.h>
 #include <linux/mtd/physmap.h>
 #include <linux/platform_device.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 #include <asm/irq.h>
 #include <asm/mach/arch.h>
@@ -36,7 +36,7 @@
 #include <asm/mach-types.h>
 #include <asm/page.h>
 #include <asm/pgtable.h>
-#include <asm/arch/time.h>
+#include <mach/time.h>
 
 /*
  * Until March of 2007 iq31244 platforms and ep80219 platforms shared the
diff --git a/arch/arm/mach-iop32x/iq80321.c b/arch/arm/mach-iop32x/iq80321.c
index 1da3c911edd3..d735539808b4 100644
--- a/arch/arm/mach-iop32x/iq80321.c
+++ b/arch/arm/mach-iop32x/iq80321.c
@@ -23,7 +23,7 @@
 #include <linux/serial_8250.h>
 #include <linux/mtd/physmap.h>
 #include <linux/platform_device.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 #include <asm/irq.h>
 #include <asm/mach/arch.h>
@@ -33,7 +33,7 @@
 #include <asm/mach-types.h>
 #include <asm/page.h>
 #include <asm/pgtable.h>
-#include <asm/arch/time.h>
+#include <mach/time.h>
 
 /*
  * IQ80321 timer tick configuration.
diff --git a/arch/arm/mach-iop32x/irq.c b/arch/arm/mach-iop32x/irq.c
index 55cf0162e8c1..ba59b2d17db1 100644
--- a/arch/arm/mach-iop32x/irq.c
+++ b/arch/arm/mach-iop32x/irq.c
@@ -16,7 +16,7 @@
 #include <linux/list.h>
 #include <asm/mach/irq.h>
 #include <asm/irq.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/mach-types.h>
 
 static u32 iop32x_mask;
diff --git a/arch/arm/mach-iop32x/n2100.c b/arch/arm/mach-iop32x/n2100.c
index 28f164ea4726..3173f9c5835d 100644
--- a/arch/arm/mach-iop32x/n2100.c
+++ b/arch/arm/mach-iop32x/n2100.c
@@ -30,7 +30,7 @@
 #include <linux/i2c.h>
 #include <linux/platform_device.h>
 #include <linux/reboot.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 #include <asm/irq.h>
 #include <asm/mach/arch.h>
@@ -40,7 +40,7 @@
 #include <asm/mach-types.h>
 #include <asm/page.h>
 #include <asm/pgtable.h>
-#include <asm/arch/time.h>
+#include <mach/time.h>
 
 /*
  * N2100 timer tick configuration.
diff --git a/include/asm-arm/arch-iop33x/adma.h b/arch/arm/mach-iop33x/include/mach/adma.h
index 4b92f795f90e..4b92f795f90e 100644
--- a/include/asm-arm/arch-iop33x/adma.h
+++ b/arch/arm/mach-iop33x/include/mach/adma.h
diff --git a/arch/arm/mach-iop33x/include/mach/debug-macro.S b/arch/arm/mach-iop33x/include/mach/debug-macro.S
new file mode 100644
index 000000000000..a60c9ef05cc3
--- /dev/null
+++ b/arch/arm/mach-iop33x/include/mach/debug-macro.S
@@ -0,0 +1,24 @@
+/*
+ * arch/arm/mach-iop33x/include/mach/debug-macro.S
+ *
+ * Debugging macro include header
+ *
+ * Copyright (C) 1994-1999 Russell King
+ * Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+		.macro	addruart, rx
+		mrc	p15, 0, \rx, c1, c0
+		tst	\rx, #1			@ mmu enabled?
+		moveq	\rx, #0xff000000	@ physical
+		movne	\rx, #0xfe000000	@ virtual
+		orr	\rx, \rx, #0x00ff0000
+		orr	\rx, \rx, #0x0000f700
+		.endm
+
+#define UART_SHIFT	2
+#include <asm/hardware/debug-8250.S>
diff --git a/arch/arm/mach-iop33x/include/mach/dma.h b/arch/arm/mach-iop33x/include/mach/dma.h
new file mode 100644
index 000000000000..d8b42232931d
--- /dev/null
+++ b/arch/arm/mach-iop33x/include/mach/dma.h
@@ -0,0 +1,9 @@
+/*
+ * arch/arm/mach-iop33x/include/mach/dma.h
+ *
+ * Copyright (C) 2004 Intel Corp.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
diff --git a/arch/arm/mach-iop33x/include/mach/entry-macro.S b/arch/arm/mach-iop33x/include/mach/entry-macro.S
new file mode 100644
index 000000000000..4e1f7282b354
--- /dev/null
+++ b/arch/arm/mach-iop33x/include/mach/entry-macro.S
@@ -0,0 +1,37 @@
+/*
+ * arch/arm/mach-iop33x/include/mach/entry-macro.S
+ *
+ * Low-level IRQ helper macros for IOP33x-based platforms
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+#include <mach/iop33x.h>
+
+	.macro	disable_fiq
+	.endm
+
+	.macro get_irqnr_preamble, base, tmp
+	mrc	p15, 0, \tmp, c15, c1, 0
+	orr	\tmp, \tmp, #(1 << 6)
+	mcr	p15, 0, \tmp, c15, c1, 0	@ Enable cp6 access
+	mrc	p15, 0, \tmp, c15, c1, 0
+	mov	\tmp, \tmp
+	sub	pc, pc, #4			@ cp_wait
+	.endm
+
+	.macro  get_irqnr_and_base, irqnr, irqstat, base, tmp
+	mrc     p6, 0, \irqstat, c14, c0, 0     @ Read IINTVEC
+	cmp     \irqstat, #0
+	mrceq   p6, 0, \irqstat, c14, c0, 0     @ erratum 63 workaround
+	adds    \irqnr, \irqstat, #1
+	movne   \irqnr, \irqstat, lsr #2
+	.endm
+
+	.macro arch_ret_to_user, tmp1, tmp2
+	mrc	p15, 0, \tmp1, c15, c1, 0
+	ands	\tmp2, \tmp1, #(1 << 6)
+	bicne	\tmp1, \tmp1, #(1 << 6)
+	mcrne	p15, 0, \tmp1, c15, c1, 0	@ Disable cp6 access
+	.endm
diff --git a/include/asm-arm/arch-iop33x/gpio.h b/arch/arm/mach-iop33x/include/mach/gpio.h
index ddd55bba9bb9..ddd55bba9bb9 100644
--- a/include/asm-arm/arch-iop33x/gpio.h
+++ b/arch/arm/mach-iop33x/include/mach/gpio.h
diff --git a/arch/arm/mach-iop33x/include/mach/hardware.h b/arch/arm/mach-iop33x/include/mach/hardware.h
new file mode 100644
index 000000000000..8c10e430655e
--- /dev/null
+++ b/arch/arm/mach-iop33x/include/mach/hardware.h
@@ -0,0 +1,46 @@
+/*
+ * arch/arm/mach-iop33x/include/mach/hardware.h
+ */
+
+#ifndef __HARDWARE_H
+#define __HARDWARE_H
+
+#include <asm/types.h>
+
+/*
+ * Note about PCI IO space mappings
+ *
+ * To make IO space accesses efficient, we store virtual addresses in
+ * the IO resources.
+ *
+ * The PCI IO space is located at virtual 0xfe000000 from physical
+ * 0x90000000.  The PCI BARs must be programmed with physical addresses,
+ * but when we read them, we convert them to virtual addresses.  See
+ * arch/arm/mach-iop3xx/iop3xx-pci.c
+ */
+#define pcibios_assign_all_busses()	1
+#define PCIBIOS_MIN_IO		0x00000000
+#define PCIBIOS_MIN_MEM		0x00000000
+
+#ifndef __ASSEMBLY__
+void iop33x_init_irq(void);
+
+extern struct platform_device iop33x_uart0_device;
+extern struct platform_device iop33x_uart1_device;
+#endif
+
+
+/*
+ * Generic chipset bits
+ *
+ */
+#include "iop33x.h"
+
+/*
+ * Board specific bits
+ */
+#include "iq80331.h"
+#include "iq80332.h"
+
+
+#endif
diff --git a/arch/arm/mach-iop33x/include/mach/io.h b/arch/arm/mach-iop33x/include/mach/io.h
new file mode 100644
index 000000000000..158874631217
--- /dev/null
+++ b/arch/arm/mach-iop33x/include/mach/io.h
@@ -0,0 +1,27 @@
+/*
+ * arch/arm/mach-iop33x/include/mach/io.h
+ *
+ * Copyright (C) 2001  MontaVista Software, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __IO_H
+#define __IO_H
+
+#include <mach/hardware.h>
+
+extern void __iomem *__iop3xx_ioremap(unsigned long cookie, size_t size,
+	unsigned int mtype);
+extern void __iop3xx_iounmap(void __iomem *addr);
+
+#define IO_SPACE_LIMIT		0xffffffff
+#define __io(p)		((void __iomem *)IOP3XX_PCI_IO_PHYS_TO_VIRT(p))
+#define __mem_pci(a)		(a)
+
+#define __arch_ioremap(a, s, f) __iop3xx_ioremap(a, s, f)
+#define __arch_iounmap(a)	 __iop3xx_iounmap(a)
+
+#endif
diff --git a/include/asm-arm/arch-iop33x/iop33x.h b/arch/arm/mach-iop33x/include/mach/iop33x.h
index 766985b9a723..24567316ec88 100644
--- a/include/asm-arm/arch-iop33x/iop33x.h
+++ b/arch/arm/mach-iop33x/include/mach/iop33x.h
@@ -1,5 +1,5 @@
 /*
- * include/asm-arm/arch-iop33x/iop33x.h
+ * arch/arm/mach-iop33x/include/mach/iop33x.h
  *
  * Intel IOP33X Chip definitions
  *
diff --git a/include/asm-arm/arch-iop33x/iq80331.h b/arch/arm/mach-iop33x/include/mach/iq80331.h
index 79b9302017ea..fe406b0127f7 100644
--- a/include/asm-arm/arch-iop33x/iq80331.h
+++ b/arch/arm/mach-iop33x/include/mach/iq80331.h
@@ -1,5 +1,5 @@
 /*
- * include/asm-arm/arch-iop33x/iq80331.h
+ * arch/arm/mach-iop33x/include/mach/iq80331.h
  *
  * Intel IQ80331 evaluation board registers
  */
diff --git a/include/asm-arm/arch-iop33x/iq80332.h b/arch/arm/mach-iop33x/include/mach/iq80332.h
index 053165629492..8325d71f2ed5 100644
--- a/include/asm-arm/arch-iop33x/iq80332.h
+++ b/arch/arm/mach-iop33x/include/mach/iq80332.h
@@ -1,5 +1,5 @@
 /*
- * include/asm-arm/arch-iop33x/iq80332.h
+ * arch/arm/mach-iop33x/include/mach/iq80332.h
  *
  * Intel IQ80332 evaluation board registers
  */
diff --git a/arch/arm/mach-iop33x/include/mach/irqs.h b/arch/arm/mach-iop33x/include/mach/irqs.h
new file mode 100644
index 000000000000..707628a600ac
--- /dev/null
+++ b/arch/arm/mach-iop33x/include/mach/irqs.h
@@ -0,0 +1,60 @@
+/*
+ * arch/arm/mach-iop33x/include/mach/irqs.h
+ *
+ * Author:	Dave Jiang (dave.jiang@intel.com)
+ * Copyright:	(C) 2003 Intel Corp.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __IRQS_H
+#define __IRQS_H
+
+/*
+ * IOP80331 chipset interrupts
+ */
+#define IRQ_IOP33X_DMA0_EOT	0
+#define IRQ_IOP33X_DMA0_EOC	1
+#define IRQ_IOP33X_DMA1_EOT	2
+#define IRQ_IOP33X_DMA1_EOC	3
+#define IRQ_IOP33X_AA_EOT	6
+#define IRQ_IOP33X_AA_EOC	7
+#define IRQ_IOP33X_TIMER0	8
+#define IRQ_IOP33X_TIMER1	9
+#define IRQ_IOP33X_I2C_0	10
+#define IRQ_IOP33X_I2C_1	11
+#define IRQ_IOP33X_MSG		12
+#define IRQ_IOP33X_MSGIBQ	13
+#define IRQ_IOP33X_ATU_BIST	14
+#define IRQ_IOP33X_PERFMON	15
+#define IRQ_IOP33X_CORE_PMU	16
+#define IRQ_IOP33X_XINT0	24
+#define IRQ_IOP33X_XINT1	25
+#define IRQ_IOP33X_XINT2	26
+#define IRQ_IOP33X_XINT3	27
+#define IRQ_IOP33X_XINT8	32
+#define IRQ_IOP33X_XINT9	33
+#define IRQ_IOP33X_XINT10	34
+#define IRQ_IOP33X_XINT11	35
+#define IRQ_IOP33X_XINT12	36
+#define IRQ_IOP33X_XINT13	37
+#define IRQ_IOP33X_XINT14	38
+#define IRQ_IOP33X_XINT15	39
+#define IRQ_IOP33X_UART0	51
+#define IRQ_IOP33X_UART1	52
+#define IRQ_IOP33X_PBIE		53
+#define IRQ_IOP33X_ATU_CRW	54
+#define IRQ_IOP33X_ATU_ERR	55
+#define IRQ_IOP33X_MCU_ERR	56
+#define IRQ_IOP33X_DMA0_ERR	57
+#define IRQ_IOP33X_DMA1_ERR	58
+#define IRQ_IOP33X_AA_ERR	60
+#define IRQ_IOP33X_MSG_ERR	62
+#define IRQ_IOP33X_HPI		63
+
+#define NR_IRQS			64
+
+
+#endif
diff --git a/arch/arm/mach-iop33x/include/mach/memory.h b/arch/arm/mach-iop33x/include/mach/memory.h
new file mode 100644
index 000000000000..2cef0bbb354f
--- /dev/null
+++ b/arch/arm/mach-iop33x/include/mach/memory.h
@@ -0,0 +1,26 @@
+/*
+ * arch/arm/mach-iop33x/include/mach/memory.h
+ */
+
+#ifndef __MEMORY_H
+#define __MEMORY_H
+
+#include <mach/hardware.h>
+
+/*
+ * Physical DRAM offset.
+ */
+#define PHYS_OFFSET	UL(0x00000000)
+
+/*
+ * Virtual view <-> PCI DMA view memory address translations
+ * virt_to_bus: Used to translate the virtual address to an
+ *		address suitable to be passed to set_dma_addr
+ * bus_to_virt: Used to convert an address for DMA operations
+ *		to an address that the kernel can use.
+ */
+#define __virt_to_bus(x)	(__virt_to_phys(x))
+#define __bus_to_virt(x)	(__phys_to_virt(x))
+
+
+#endif
diff --git a/arch/arm/mach-iop33x/include/mach/system.h b/arch/arm/mach-iop33x/include/mach/system.h
new file mode 100644
index 000000000000..7bf3bfb49446
--- /dev/null
+++ b/arch/arm/mach-iop33x/include/mach/system.h
@@ -0,0 +1,22 @@
+/*
+ * arch/arm/mach-iop33x/include/mach/system.h
+ *
+ * Copyright (C) 2001 MontaVista Software, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+static inline void arch_idle(void)
+{
+	cpu_do_idle();
+}
+
+static inline void arch_reset(char mode)
+{
+	*IOP3XX_PCSR = 0x30;
+
+	/* Jump into ROM at address 0 */
+	cpu_reset(0);
+}
diff --git a/include/asm-arm/arch-iop33x/time.h b/arch/arm/mach-iop33x/include/mach/time.h
index 4ac4d7664f85..4ac4d7664f85 100644
--- a/include/asm-arm/arch-iop33x/time.h
+++ b/arch/arm/mach-iop33x/include/mach/time.h
diff --git a/arch/arm/mach-iop33x/include/mach/timex.h b/arch/arm/mach-iop33x/include/mach/timex.h
new file mode 100644
index 000000000000..c75760844d49
--- /dev/null
+++ b/arch/arm/mach-iop33x/include/mach/timex.h
@@ -0,0 +1,9 @@
+/*
+ * arch/arm/mach-iop33x/include/mach/timex.h
+ *
+ * IOP3xx architecture timex specifications
+ */
+
+#include <mach/hardware.h>
+
+#define CLOCK_TICK_RATE		(100 * HZ)
diff --git a/arch/arm/mach-iop33x/include/mach/uncompress.h b/arch/arm/mach-iop33x/include/mach/uncompress.h
new file mode 100644
index 000000000000..b42423f63302
--- /dev/null
+++ b/arch/arm/mach-iop33x/include/mach/uncompress.h
@@ -0,0 +1,37 @@
+/*
+ * arch/arm/mach-iop33x/include/mach/uncompress.h
+ */
+
+#include <asm/types.h>
+#include <asm/mach-types.h>
+#include <linux/serial_reg.h>
+#include <mach/hardware.h>
+
+static volatile u32 *uart_base;
+
+#define TX_DONE		(UART_LSR_TEMT | UART_LSR_THRE)
+
+static inline void putc(char c)
+{
+	while ((uart_base[UART_LSR] & TX_DONE) != TX_DONE)
+		barrier();
+	uart_base[UART_TX] = c;
+}
+
+static inline void flush(void)
+{
+}
+
+static __inline__ void __arch_decomp_setup(unsigned long arch_id)
+{
+	if (machine_is_iq80331() || machine_is_iq80332())
+		uart_base = (volatile u32 *)IOP33X_UART0_PHYS;
+	else
+		uart_base = (volatile u32 *)0xfe800000;
+}
+
+/*
+ * nothing to do
+ */
+#define arch_decomp_setup()	__arch_decomp_setup(arch_id)
+#define arch_decomp_wdog()
diff --git a/arch/arm/mach-iop33x/include/mach/vmalloc.h b/arch/arm/mach-iop33x/include/mach/vmalloc.h
new file mode 100644
index 000000000000..f9f99dea9bc4
--- /dev/null
+++ b/arch/arm/mach-iop33x/include/mach/vmalloc.h
@@ -0,0 +1,5 @@
+/*
+ * arch/arm/mach-iop33x/include/mach/vmalloc.h
+ */
+
+#define VMALLOC_END	0xfe000000
diff --git a/arch/arm/mach-iop33x/iq80331.c b/arch/arm/mach-iop33x/iq80331.c
index de39fd778579..c7d99f9fafed 100644
--- a/arch/arm/mach-iop33x/iq80331.c
+++ b/arch/arm/mach-iop33x/iq80331.c
@@ -22,7 +22,7 @@
 #include <linux/serial_8250.h>
 #include <linux/mtd/physmap.h>
 #include <linux/platform_device.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 #include <asm/irq.h>
 #include <asm/mach/arch.h>
@@ -32,7 +32,7 @@
 #include <asm/mach-types.h>
 #include <asm/page.h>
 #include <asm/pgtable.h>
-#include <asm/arch/time.h>
+#include <mach/time.h>
 
 /*
  * IQ80331 timer tick configuration.
diff --git a/arch/arm/mach-iop33x/iq80332.c b/arch/arm/mach-iop33x/iq80332.c
index 4904fd78445f..af616c5f4fb2 100644
--- a/arch/arm/mach-iop33x/iq80332.c
+++ b/arch/arm/mach-iop33x/iq80332.c
@@ -22,7 +22,7 @@
 #include <linux/serial_8250.h>
 #include <linux/mtd/physmap.h>
 #include <linux/platform_device.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 #include <asm/irq.h>
 #include <asm/mach/arch.h>
@@ -32,7 +32,7 @@
 #include <asm/mach-types.h>
 #include <asm/page.h>
 #include <asm/pgtable.h>
-#include <asm/arch/time.h>
+#include <mach/time.h>
 
 /*
  * IQ80332 timer tick configuration.
diff --git a/arch/arm/mach-iop33x/irq.c b/arch/arm/mach-iop33x/irq.c
index f09dd054b9c0..abb4ea2ed4fd 100644
--- a/arch/arm/mach-iop33x/irq.c
+++ b/arch/arm/mach-iop33x/irq.c
@@ -16,7 +16,7 @@
 #include <linux/list.h>
 #include <asm/mach/irq.h>
 #include <asm/irq.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/mach-types.h>
 
 static u32 iop33x_mask0;
diff --git a/arch/arm/mach-iop33x/uart.c b/arch/arm/mach-iop33x/uart.c
index ac297cd0276c..8c21870fa808 100644
--- a/arch/arm/mach-iop33x/uart.c
+++ b/arch/arm/mach-iop33x/uart.c
@@ -24,9 +24,8 @@
 #include <asm/setup.h>
 #include <asm/system.h>
 #include <asm/memory.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/hardware/iop3xx.h>
-#include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 
 #define IOP33X_UART_XTAL 33334000
diff --git a/arch/arm/mach-ixp2000/core.c b/arch/arm/mach-ixp2000/core.c
index 81cdc8267206..a6a4f93085fd 100644
--- a/arch/arm/mach-ixp2000/core.c
+++ b/arch/arm/mach-ixp2000/core.c
@@ -29,7 +29,7 @@
 #include <asm/types.h>
 #include <asm/setup.h>
 #include <asm/memory.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/irq.h>
 #include <asm/system.h>
 #include <asm/tlbflush.h>
@@ -39,7 +39,7 @@
 #include <asm/mach/time.h>
 #include <asm/mach/irq.h>
 
-#include <asm/arch/gpio.h>
+#include <mach/gpio.h>
 
 static DEFINE_SPINLOCK(ixp2000_slowport_lock);
 static unsigned long ixp2000_slowport_irq_flags;
@@ -329,19 +329,19 @@ static int ixp2000_GPIO_irq_type(unsigned int irq, unsigned int type)
 	/*
 	 * Then, set the proper trigger type.
 	 */
-	if (type & IRQT_FALLING)
+	if (type & IRQ_TYPE_EDGE_FALLING)
 		GPIO_IRQ_falling_edge |= 1 << line;
 	else
 		GPIO_IRQ_falling_edge &= ~(1 << line);
-	if (type & IRQT_RISING)
+	if (type & IRQ_TYPE_EDGE_RISING)
 		GPIO_IRQ_rising_edge |= 1 << line;
 	else
 		GPIO_IRQ_rising_edge &= ~(1 << line);
-	if (type & IRQT_LOW)
+	if (type & IRQ_TYPE_LEVEL_LOW)
 		GPIO_IRQ_level_low |= 1 << line;
 	else
 		GPIO_IRQ_level_low &= ~(1 << line);
-	if (type & IRQT_HIGH)
+	if (type & IRQ_TYPE_LEVEL_HIGH)
 		GPIO_IRQ_level_high |= 1 << line;
 	else
 		GPIO_IRQ_level_high &= ~(1 << line);
diff --git a/arch/arm/mach-ixp2000/enp2611.c b/arch/arm/mach-ixp2000/enp2611.c
index 9c49435d42c3..c62ed655c1a7 100644
--- a/arch/arm/mach-ixp2000/enp2611.c
+++ b/arch/arm/mach-ixp2000/enp2611.c
@@ -38,7 +38,7 @@
 #include <asm/pgtable.h>
 #include <asm/page.h>
 #include <asm/system.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/mach-types.h>
 
 #include <asm/mach/pci.h>
diff --git a/arch/arm/mach-ixp2000/include/mach/debug-macro.S b/arch/arm/mach-ixp2000/include/mach/debug-macro.S
new file mode 100644
index 000000000000..904ff56d2246
--- /dev/null
+++ b/arch/arm/mach-ixp2000/include/mach/debug-macro.S
@@ -0,0 +1,27 @@
+/* arch/arm/mach-ixp2000/include/mach/debug-macro.S
+ *
+ * Debugging macro include header
+ *
+ *  Copyright (C) 1994-1999 Russell King
+ *  Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+*/
+
+		.macro  addruart,rx
+		mrc	p15, 0, \rx, c1, c0
+		tst	\rx, #1			@ MMU enabled?
+		moveq	\rx, #0xc0000000	@ Physical base
+		movne	\rx, #0xfe000000	@ virtual base
+		orrne	\rx, \rx, #0x00f00000
+		orr	\rx, \rx, #0x00030000
+#ifdef	__ARMEB__
+		orr	\rx, \rx, #0x00000003
+#endif
+		.endm
+
+#define UART_SHIFT	2
+#include <asm/hardware/debug-8250.S>
diff --git a/arch/arm/mach-ixp2000/include/mach/dma.h b/arch/arm/mach-ixp2000/include/mach/dma.h
new file mode 100644
index 000000000000..26063d60f622
--- /dev/null
+++ b/arch/arm/mach-ixp2000/include/mach/dma.h
@@ -0,0 +1,9 @@
+/*
+ * arch/arm/mach-ixp2000/include/mach/dma.h
+ *
+ * Copyright (C) 2002 Intel Corp.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
diff --git a/include/asm-arm/arch-ixp2000/enp2611.h b/arch/arm/mach-ixp2000/include/mach/enp2611.h
index 42f3c28dc5c4..9ce3690061d5 100644
--- a/include/asm-arm/arch-ixp2000/enp2611.h
+++ b/arch/arm/mach-ixp2000/include/mach/enp2611.h
@@ -1,5 +1,5 @@
 /*
- * include/asm-arm/arch-ixp2000/enp2611.h
+ * arch/arm/mach-ixp2000/include/mach/enp2611.h
  *
  * Register and other defines for Radisys ENP-2611
  *
diff --git a/arch/arm/mach-ixp2000/include/mach/entry-macro.S b/arch/arm/mach-ixp2000/include/mach/entry-macro.S
new file mode 100644
index 000000000000..5850ffc8c751
--- /dev/null
+++ b/arch/arm/mach-ixp2000/include/mach/entry-macro.S
@@ -0,0 +1,60 @@
+/*
+ * arch/arm/mach-ixp2000/include/mach/entry-macro.S
+ *
+ * Low-level IRQ helper macros for IXP2000-based platforms
+ *
+ * This file is licensed under  the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+#include <mach/irqs.h>
+
+		.macro  disable_fiq
+		.endm
+
+		.macro  get_irqnr_preamble, base, tmp
+		.endm
+
+		.macro  arch_ret_to_user, tmp1, tmp2
+		.endm
+
+		.macro  get_irqnr_and_base, irqnr, irqstat, base, tmp
+
+		mov	\irqnr, #0x0              @clear out irqnr as default
+                mov	\base, #0xfe000000
+		orr	\base, \base, #0x00e00000
+		orr	\base, \base, #0x08
+		ldr	\irqstat, [\base]         @ get interrupts
+
+		cmp	\irqstat, #0
+		beq	1001f
+
+		clz     \irqnr, \irqstat
+		mov     \base, #31
+		subs    \irqnr, \base, \irqnr
+
+		/*
+		 * We handle PCIA and PCIB here so we don't have an
+		 * extra layer of code just to check these two bits.
+		 */
+		cmp	\irqnr, #IRQ_IXP2000_PCI
+		bne	1001f
+
+		mov	\base, #0xfe000000
+		orr	\base, \base, #0x00c00000
+		orr	\base, \base, #0x00000100
+		orr	\base, \base, #0x00000058
+		ldr	\irqstat, [\base]
+
+		mov	\tmp, #(1<<26)
+		tst	\irqstat, \tmp
+		movne	\irqnr, #IRQ_IXP2000_PCIA
+		bne	1001f
+
+		mov	\tmp, #(1<<27)
+		tst	\irqstat, \tmp
+		movne	\irqnr, #IRQ_IXP2000_PCIB
+
+1001:
+		.endm
+
diff --git a/arch/arm/mach-ixp2000/include/mach/gpio.h b/arch/arm/mach-ixp2000/include/mach/gpio.h
new file mode 100644
index 000000000000..4a88d2c33dac
--- /dev/null
+++ b/arch/arm/mach-ixp2000/include/mach/gpio.h
@@ -0,0 +1,48 @@
+/*
+ * arch/arm/mach-ixp2000/include/mach/gpio.h
+ *
+ * Copyright (C) 2002 Intel Corporation.
+ *
+ * This program is free software, you can redistribute it and/or modify 
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/*
+ * IXP2000 GPIO in/out, edge/level detection for IRQs:
+ * IRQs are generated on Falling-edge, Rising-Edge, Level-low, Level-High
+ * or both Falling-edge and Rising-edge.  
+ * This must be called *before* the corresponding IRQ is registerd.
+ * Use this instead of directly setting the GPIO registers.
+ * GPIOs may also be used as GPIOs (e.g. for emulating i2c/smb)
+ */
+#ifndef __ASM_ARCH_GPIO_H
+#define __ASM_ARCH_GPIO_H
+
+#ifndef __ASSEMBLY__
+
+#define GPIO_IN				0
+#define GPIO_OUT			1
+
+#define IXP2000_GPIO_LOW		0
+#define IXP2000_GPIO_HIGH		1
+
+extern void gpio_line_config(int line, int direction);
+
+static inline int gpio_line_get(int line)
+{
+	return (((*IXP2000_GPIO_PLR) >> line) & 1);
+}
+
+static inline void gpio_line_set(int line, int value)
+{
+	if (value == IXP2000_GPIO_HIGH) {
+		ixp2000_reg_write(IXP2000_GPIO_POSR, 1 << line);
+	} else if (value == IXP2000_GPIO_LOW) {
+		ixp2000_reg_write(IXP2000_GPIO_POCR, 1 << line);
+	}
+}
+
+#endif /* !__ASSEMBLY__ */
+
+#endif /* ASM_ARCH_IXP2000_GPIO_H_ */
diff --git a/arch/arm/mach-ixp2000/include/mach/hardware.h b/arch/arm/mach-ixp2000/include/mach/hardware.h
new file mode 100644
index 000000000000..f033de4e7493
--- /dev/null
+++ b/arch/arm/mach-ixp2000/include/mach/hardware.h
@@ -0,0 +1,44 @@
+/*
+ * arch/arm/mach-ixp2000/include/mach/hardware.h
+ *
+ * Hardware definitions for IXP2400/2800 based systems
+ *
+ * Original Author: Naeem M Afzal <naeem.m.afzal@intel.com>
+ *
+ * Maintainer: Deepak Saxena <dsaxena@mvista.com>
+ *
+ * Copyright (C) 2001-2002 Intel Corp.
+ * Copyright (C) 2003-2004 MontaVista Software, Inc.
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ */
+
+#ifndef __ASM_ARCH_HARDWARE_H__
+#define __ASM_ARCH_HARDWARE_H__
+
+/*
+ * This needs to be platform-specific?
+ */
+#define PCIBIOS_MIN_IO          0x00000000
+#define PCIBIOS_MIN_MEM         0x00000000
+
+#include "ixp2000-regs.h"	/* Chipset Registers */
+
+#define pcibios_assign_all_busses() 0
+
+/*
+ * Platform helper functions
+ */
+#include "platform.h"
+
+/*
+ * Platform-specific bits
+ */
+#include "enp2611.h"		/* ENP-2611 */
+#include "ixdp2x00.h"		/* IXDP2400/2800 */
+#include "ixdp2x01.h"		/* IXDP2401/2801 */
+
+#endif  /* _ASM_ARCH_HARDWARE_H__ */
diff --git a/arch/arm/mach-ixp2000/include/mach/io.h b/arch/arm/mach-ixp2000/include/mach/io.h
new file mode 100644
index 000000000000..859e584914d9
--- /dev/null
+++ b/arch/arm/mach-ixp2000/include/mach/io.h
@@ -0,0 +1,134 @@
+/*
+ * arch/arm/mach-ixp2000/include/mach/io.h
+ *
+ * Original Author: Naeem M Afzal <naeem.m.afzal@intel.com>
+ * Maintainer: Deepak Saxena <dsaxena@plexity.net>
+ *
+ * Copyright (C) 2002  Intel Corp.
+ * Copyrgiht (C) 2003-2004 MontaVista Software, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARM_ARCH_IO_H
+#define __ASM_ARM_ARCH_IO_H
+
+#include <mach/hardware.h>
+
+#define IO_SPACE_LIMIT		0xffffffff
+#define __mem_pci(a)		(a)
+
+/*
+ * The A? revisions of the IXP2000s assert byte lanes for PCI I/O
+ * transactions the other way round (MEM transactions don't have this
+ * issue), so if we want to support those models, we need to override
+ * the standard I/O functions.
+ *
+ * B0 and later have a bit that can be set to 1 to get the proper
+ * behavior for I/O transactions, which then allows us to use the
+ * standard I/O functions.  This is what we do if the user does not
+ * explicitly ask for support for pre-B0.
+ */
+#ifdef CONFIG_IXP2000_SUPPORT_BROKEN_PCI_IO
+#define ___io(p)		((void __iomem *)((p)+IXP2000_PCI_IO_VIRT_BASE))
+
+#define alignb(addr)		(void __iomem *)((unsigned long)(addr) ^ 3)
+#define alignw(addr)		(void __iomem *)((unsigned long)(addr) ^ 2)
+
+#define outb(v,p)		__raw_writeb((v),alignb(___io(p)))
+#define outw(v,p)		__raw_writew((v),alignw(___io(p)))
+#define outl(v,p)		__raw_writel((v),___io(p))
+
+#define inb(p)		({ unsigned int __v = __raw_readb(alignb(___io(p))); __v; })
+#define inw(p)		\
+	({ unsigned int __v = (__raw_readw(alignw(___io(p)))); __v; })
+#define inl(p)		\
+	({ unsigned int __v = (__raw_readl(___io(p))); __v; })
+
+#define outsb(p,d,l)		__raw_writesb(alignb(___io(p)),d,l)
+#define outsw(p,d,l)		__raw_writesw(alignw(___io(p)),d,l)
+#define outsl(p,d,l)		__raw_writesl(___io(p),d,l)
+
+#define insb(p,d,l)		__raw_readsb(alignb(___io(p)),d,l)
+#define insw(p,d,l)		__raw_readsw(alignw(___io(p)),d,l)
+#define insl(p,d,l)		__raw_readsl(___io(p),d,l)
+
+#define __is_io_address(p)	((((unsigned long)(p)) & ~(IXP2000_PCI_IO_SIZE - 1)) == IXP2000_PCI_IO_VIRT_BASE)
+
+#define ioread8(p)						\
+	({							\
+		unsigned int __v;				\
+								\
+		if (__is_io_address(p)) {			\
+			__v = __raw_readb(alignb(p));		\
+		} else {					\
+			__v = __raw_readb(p);			\
+		}						\
+								\
+		__v;						\
+	})							\
+
+#define ioread16(p)						\
+	({							\
+		unsigned int __v;				\
+								\
+		if (__is_io_address(p)) {			\
+			__v = __raw_readw(alignw(p));		\
+		} else {					\
+			__v = le16_to_cpu(__raw_readw(p));	\
+		}						\
+								\
+		__v;						\
+	})
+
+#define ioread32(p)						\
+	({							\
+		unsigned int __v;				\
+								\
+		if (__is_io_address(p)) {			\
+			__v = __raw_readl(p);			\
+		} else {					\
+			__v = le32_to_cpu(__raw_readl(p));	\
+		}						\
+								\
+		 __v;						\
+	})
+
+#define iowrite8(v,p)						\
+	({							\
+		if (__is_io_address(p)) {			\
+			__raw_writeb((v), alignb(p));		\
+		} else {					\
+			__raw_writeb((v), p);			\
+		}						\
+	})
+
+#define iowrite16(v,p)						\
+	({							\
+		if (__is_io_address(p)) {			\
+			__raw_writew((v), alignw(p));		\
+		} else {					\
+			__raw_writew(cpu_to_le16(v), p);	\
+		}						\
+	})
+
+#define iowrite32(v,p)						\
+	({							\
+		if (__is_io_address(p)) {			\
+			__raw_writel((v), p);			\
+		} else {					\
+			__raw_writel(cpu_to_le32(v), p);	\
+		}						\
+	})
+
+#define ioport_map(port, nr)	___io(port)
+
+#define ioport_unmap(addr)
+#else
+#define __io(p)			((void __iomem *)((p)+IXP2000_PCI_IO_VIRT_BASE))
+#endif
+
+
+#endif
diff --git a/arch/arm/mach-ixp2000/include/mach/irqs.h b/arch/arm/mach-ixp2000/include/mach/irqs.h
new file mode 100644
index 000000000000..bee96bcafdca
--- /dev/null
+++ b/arch/arm/mach-ixp2000/include/mach/irqs.h
@@ -0,0 +1,207 @@
+/*
+ * arch/arm/mach-ixp2000/include/mach/irqs.h
+ *
+ * Original Author: Naeem Afzal <naeem.m.afzal@intel.com>
+ * Maintainer: Deepak Saxena <dsaxena@plexity.net>
+ *
+ * Copyright (C) 2002 Intel Corp.
+ * Copyright (C) 2003-2004 MontaVista Software, Inc.
+ * 
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef _IRQS_H
+#define _IRQS_H
+
+/*
+ * Do NOT add #ifdef MACHINE_FOO in here.
+ * Simpy add your machine IRQs here and increase NR_IRQS if needed to
+ * hold your machine's IRQ table.
+ */
+
+/*
+ * Some interrupt numbers go unused b/c the IRQ mask/ummask/status
+ * register has those bit reserved. We just mark those interrupts
+ * as invalid and this allows us to do mask/unmask with a single
+ * shift operation instead of having to map the IRQ number to
+ * a HW IRQ number.
+ */
+#define	IRQ_IXP2000_SOFT_INT		0 /* soft interrupt */
+#define	IRQ_IXP2000_ERRSUM		1 /* OR of all bits in ErrorStatus reg*/
+#define	IRQ_IXP2000_UART		2
+#define	IRQ_IXP2000_GPIO		3
+#define	IRQ_IXP2000_TIMER1     		4
+#define	IRQ_IXP2000_TIMER2     		5
+#define	IRQ_IXP2000_TIMER3     		6
+#define	IRQ_IXP2000_TIMER4     		7
+#define	IRQ_IXP2000_PMU        		8               
+#define	IRQ_IXP2000_SPF        		9  /* Slow port framer IRQ */
+#define	IRQ_IXP2000_DMA1      		10
+#define	IRQ_IXP2000_DMA2      		11
+#define	IRQ_IXP2000_DMA3      		12
+#define	IRQ_IXP2000_PCI_DOORBELL	13
+#define	IRQ_IXP2000_ME_ATTN       	14 
+#define	IRQ_IXP2000_PCI   		15 /* PCI INTA or INTB */
+#define	IRQ_IXP2000_THDA0   		16 /* thread 0-31A */
+#define	IRQ_IXP2000_THDA1  		17 /* thread 32-63A, IXP2800 only */
+#define	IRQ_IXP2000_THDA2		18 /* thread 64-95A */
+#define	IRQ_IXP2000_THDA3 		19 /* thread 96-127A, IXP2800 only */
+#define	IRQ_IXP2000_THDB0		24 /* thread 0-31B */
+#define	IRQ_IXP2000_THDB1		25 /* thread 32-63B, IXP2800 only */
+#define	IRQ_IXP2000_THDB2		26 /* thread 64-95B */
+#define	IRQ_IXP2000_THDB3		27 /* thread 96-127B, IXP2800 only */
+
+/* define generic GPIOs */
+#define IRQ_IXP2000_GPIO0		32
+#define IRQ_IXP2000_GPIO1		33
+#define IRQ_IXP2000_GPIO2		34
+#define IRQ_IXP2000_GPIO3		35
+#define IRQ_IXP2000_GPIO4		36
+#define IRQ_IXP2000_GPIO5		37
+#define IRQ_IXP2000_GPIO6		38
+#define IRQ_IXP2000_GPIO7		39
+
+/* split off the 2 PCI sources */
+#define IRQ_IXP2000_PCIA		40
+#define IRQ_IXP2000_PCIB		41
+
+/* Int sources from IRQ_ERROR_STATUS */
+#define IRQ_IXP2000_DRAM0_MIN_ERR	42
+#define IRQ_IXP2000_DRAM0_MAJ_ERR	43
+#define IRQ_IXP2000_DRAM1_MIN_ERR	44
+#define IRQ_IXP2000_DRAM1_MAJ_ERR	45
+#define IRQ_IXP2000_DRAM2_MIN_ERR	46
+#define IRQ_IXP2000_DRAM2_MAJ_ERR	47
+/* 48-57 reserved */
+#define IRQ_IXP2000_SRAM0_ERR		58
+#define IRQ_IXP2000_SRAM1_ERR		59
+#define IRQ_IXP2000_SRAM2_ERR		60
+#define IRQ_IXP2000_SRAM3_ERR		61
+/* 62-65 reserved */
+#define IRQ_IXP2000_MEDIA_ERR		66
+#define IRQ_IXP2000_PCI_ERR			67
+#define IRQ_IXP2000_SP_INT			68
+
+#define NR_IXP2000_IRQS				69
+
+#define	IXP2000_BOARD_IRQ(x)		(NR_IXP2000_IRQS + (x))
+
+#define	IXP2000_BOARD_IRQ_MASK(irq)	(1 << (irq - NR_IXP2000_IRQS))	
+
+#define IXP2000_ERR_IRQ_MASK(irq) ( 1 << (irq - IRQ_IXP2000_DRAM0_MIN_ERR))
+#define IXP2000_VALID_ERR_IRQ_MASK (\
+		IXP2000_ERR_IRQ_MASK(IRQ_IXP2000_DRAM0_MIN_ERR) | \
+		IXP2000_ERR_IRQ_MASK(IRQ_IXP2000_DRAM0_MAJ_ERR) | \
+		IXP2000_ERR_IRQ_MASK(IRQ_IXP2000_DRAM1_MIN_ERR) | \
+		IXP2000_ERR_IRQ_MASK(IRQ_IXP2000_DRAM1_MAJ_ERR) | \
+		IXP2000_ERR_IRQ_MASK(IRQ_IXP2000_DRAM2_MIN_ERR) | \
+		IXP2000_ERR_IRQ_MASK(IRQ_IXP2000_DRAM2_MAJ_ERR) | \
+		IXP2000_ERR_IRQ_MASK(IRQ_IXP2000_SRAM0_ERR) | \
+		IXP2000_ERR_IRQ_MASK(IRQ_IXP2000_SRAM1_ERR) | \
+		IXP2000_ERR_IRQ_MASK(IRQ_IXP2000_SRAM2_ERR) | \
+		IXP2000_ERR_IRQ_MASK(IRQ_IXP2000_SRAM3_ERR) | \
+		IXP2000_ERR_IRQ_MASK(IRQ_IXP2000_MEDIA_ERR) | \
+		IXP2000_ERR_IRQ_MASK(IRQ_IXP2000_PCI_ERR) | \
+		IXP2000_ERR_IRQ_MASK(IRQ_IXP2000_SP_INT)	)
+
+/*
+ * This allows for all the on-chip sources plus up to 32 CPLD based
+ * IRQs. Should be more than enough.
+ */
+#define	IXP2000_BOARD_IRQS		32
+#define NR_IRQS				(NR_IXP2000_IRQS + IXP2000_BOARD_IRQS)
+
+
+/* 
+ * IXDP2400 specific IRQs
+ */
+#define	IRQ_IXDP2400_INGRESS_NPU	IXP2000_BOARD_IRQ(0) 
+#define	IRQ_IXDP2400_ENET		IXP2000_BOARD_IRQ(1) 
+#define	IRQ_IXDP2400_MEDIA_PCI		IXP2000_BOARD_IRQ(2) 
+#define	IRQ_IXDP2400_MEDIA_SP		IXP2000_BOARD_IRQ(3) 
+#define	IRQ_IXDP2400_SF_PCI		IXP2000_BOARD_IRQ(4) 
+#define	IRQ_IXDP2400_SF_SP		IXP2000_BOARD_IRQ(5) 
+#define	IRQ_IXDP2400_PMC		IXP2000_BOARD_IRQ(6) 
+#define	IRQ_IXDP2400_TVM		IXP2000_BOARD_IRQ(7) 
+
+#define	NR_IXDP2400_IRQS		((IRQ_IXDP2400_TVM)+1)  
+#define	IXDP2400_NR_IRQS		NR_IXDP2400_IRQS - NR_IXP2000_IRQS
+
+/* IXDP2800 specific IRQs */
+#define IRQ_IXDP2800_EGRESS_ENET	IXP2000_BOARD_IRQ(0)
+#define IRQ_IXDP2800_INGRESS_NPU	IXP2000_BOARD_IRQ(1)
+#define IRQ_IXDP2800_PMC		IXP2000_BOARD_IRQ(2)
+#define IRQ_IXDP2800_FABRIC_PCI		IXP2000_BOARD_IRQ(3)
+#define IRQ_IXDP2800_FABRIC		IXP2000_BOARD_IRQ(4)
+#define IRQ_IXDP2800_MEDIA		IXP2000_BOARD_IRQ(5)
+
+#define	NR_IXDP2800_IRQS		((IRQ_IXDP2800_MEDIA)+1)
+#define	IXDP2800_NR_IRQS		NR_IXDP2800_IRQS - NR_IXP2000_IRQS
+
+/* 
+ * IRQs on both IXDP2x01 boards
+ */
+#define IRQ_IXDP2X01_SPCI_DB_0		IXP2000_BOARD_IRQ(2)
+#define IRQ_IXDP2X01_SPCI_DB_1		IXP2000_BOARD_IRQ(3)
+#define IRQ_IXDP2X01_SPCI_PMC_INTA	IXP2000_BOARD_IRQ(4)
+#define IRQ_IXDP2X01_SPCI_PMC_INTB	IXP2000_BOARD_IRQ(5)
+#define IRQ_IXDP2X01_SPCI_PMC_INTC	IXP2000_BOARD_IRQ(6)
+#define IRQ_IXDP2X01_SPCI_PMC_INTD	IXP2000_BOARD_IRQ(7)
+#define IRQ_IXDP2X01_SPCI_FIC_INT	IXP2000_BOARD_IRQ(8)
+#define IRQ_IXDP2X01_IPMI_FROM		IXP2000_BOARD_IRQ(16)
+#define IRQ_IXDP2X01_125US		IXP2000_BOARD_IRQ(17)
+#define IRQ_IXDP2X01_DB_0_ADD		IXP2000_BOARD_IRQ(18)
+#define IRQ_IXDP2X01_DB_1_ADD		IXP2000_BOARD_IRQ(19)
+#define IRQ_IXDP2X01_UART1		IXP2000_BOARD_IRQ(21)
+#define IRQ_IXDP2X01_UART2		IXP2000_BOARD_IRQ(22)
+#define IRQ_IXDP2X01_FIC_ADD_INT	IXP2000_BOARD_IRQ(24)
+#define IRQ_IXDP2X01_CS8900		IXP2000_BOARD_IRQ(25)
+#define IRQ_IXDP2X01_BBSRAM		IXP2000_BOARD_IRQ(26)
+
+#define IXDP2X01_VALID_IRQ_MASK ( \
+		IXP2000_BOARD_IRQ_MASK(IRQ_IXDP2X01_SPCI_DB_0) | \
+		IXP2000_BOARD_IRQ_MASK(IRQ_IXDP2X01_SPCI_DB_1) | \
+		IXP2000_BOARD_IRQ_MASK(IRQ_IXDP2X01_SPCI_PMC_INTA) | \
+		IXP2000_BOARD_IRQ_MASK(IRQ_IXDP2X01_SPCI_PMC_INTB) | \
+		IXP2000_BOARD_IRQ_MASK(IRQ_IXDP2X01_SPCI_PMC_INTC) | \
+		IXP2000_BOARD_IRQ_MASK(IRQ_IXDP2X01_SPCI_PMC_INTD) | \
+		IXP2000_BOARD_IRQ_MASK(IRQ_IXDP2X01_SPCI_FIC_INT) | \
+		IXP2000_BOARD_IRQ_MASK(IRQ_IXDP2X01_IPMI_FROM) | \
+		IXP2000_BOARD_IRQ_MASK(IRQ_IXDP2X01_125US) | \
+		IXP2000_BOARD_IRQ_MASK(IRQ_IXDP2X01_DB_0_ADD) | \
+		IXP2000_BOARD_IRQ_MASK(IRQ_IXDP2X01_DB_1_ADD) | \
+		IXP2000_BOARD_IRQ_MASK(IRQ_IXDP2X01_UART1) | \
+		IXP2000_BOARD_IRQ_MASK(IRQ_IXDP2X01_UART2) | \
+		IXP2000_BOARD_IRQ_MASK(IRQ_IXDP2X01_FIC_ADD_INT) | \
+		IXP2000_BOARD_IRQ_MASK(IRQ_IXDP2X01_CS8900) | \
+		IXP2000_BOARD_IRQ_MASK(IRQ_IXDP2X01_BBSRAM) )
+
+/* 
+ * IXDP2401 specific IRQs
+ */
+#define IRQ_IXDP2401_INTA_82546		IXP2000_BOARD_IRQ(0)
+#define IRQ_IXDP2401_INTB_82546		IXP2000_BOARD_IRQ(1)
+
+#define	IXDP2401_VALID_IRQ_MASK ( \
+		IXDP2X01_VALID_IRQ_MASK | \
+		IXP2000_BOARD_IRQ_MASK(IRQ_IXDP2401_INTA_82546) |\
+		IXP2000_BOARD_IRQ_MASK(IRQ_IXDP2401_INTB_82546))
+
+/*
+ * IXDP2801-specific IRQs
+ */
+#define IRQ_IXDP2801_RIV		IXP2000_BOARD_IRQ(0)
+#define IRQ_IXDP2801_CNFG_MEDIA		IXP2000_BOARD_IRQ(27)
+#define IRQ_IXDP2801_CLOCK_REF		IXP2000_BOARD_IRQ(28)
+
+#define	IXDP2801_VALID_IRQ_MASK ( \
+		IXDP2X01_VALID_IRQ_MASK | \
+		IXP2000_BOARD_IRQ_MASK(IRQ_IXDP2801_RIV) |\
+		IXP2000_BOARD_IRQ_MASK(IRQ_IXDP2801_CNFG_MEDIA) |\
+		IXP2000_BOARD_IRQ_MASK(IRQ_IXDP2801_CLOCK_REF))
+
+#define	NR_IXDP2X01_IRQS		((IRQ_IXDP2801_CLOCK_REF) + 1)
+
+#endif /*_IRQS_H*/
diff --git a/include/asm-arm/arch-ixp2000/ixdp2x00.h b/arch/arm/mach-ixp2000/include/mach/ixdp2x00.h
index 546e2e8e27b8..5df8479d9481 100644
--- a/include/asm-arm/arch-ixp2000/ixdp2x00.h
+++ b/arch/arm/mach-ixp2000/include/mach/ixdp2x00.h
@@ -1,5 +1,5 @@
 /*
- * include/asm-arm/arch-ixp2000/ixdp2x00.h
+ * arch/arm/mach-ixp2000/include/mach/ixdp2x00.h
  *
  * Register and other defines for IXDP2[48]00 platforms
  *
diff --git a/include/asm-arm/arch-ixp2000/ixdp2x01.h b/arch/arm/mach-ixp2000/include/mach/ixdp2x01.h
index c6d51426e98f..4c1f04083e54 100644
--- a/include/asm-arm/arch-ixp2000/ixdp2x01.h
+++ b/arch/arm/mach-ixp2000/include/mach/ixdp2x01.h
@@ -1,5 +1,5 @@
 /*
- * include/asm-arm/arch-ixp2000/ixdp2x01.h
+ * arch/arm/mach-ixp2000/include/mach/ixdp2x01.h
  *
  * Platform definitions for IXDP2X01 && IXDP2801 systems
  *
diff --git a/include/asm-arm/arch-ixp2000/ixp2000-regs.h b/arch/arm/mach-ixp2000/include/mach/ixp2000-regs.h
index ccae4bec92c5..19d80379a3e3 100644
--- a/include/asm-arm/arch-ixp2000/ixp2000-regs.h
+++ b/arch/arm/mach-ixp2000/include/mach/ixp2000-regs.h
@@ -1,5 +1,5 @@
 /*
- * include/asm-arm/arch-ixp2000/ixp2000-regs.h
+ * arch/arm/mach-ixp2000/include/mach/ixp2000-regs.h
  *
  * Chipset register definitions for IXP2400/2800 based systems.
  *
diff --git a/arch/arm/mach-ixp2000/include/mach/memory.h b/arch/arm/mach-ixp2000/include/mach/memory.h
new file mode 100644
index 000000000000..241529a7c52d
--- /dev/null
+++ b/arch/arm/mach-ixp2000/include/mach/memory.h
@@ -0,0 +1,34 @@
+/*
+ * arch/arm/mach-ixp2000/include/mach/memory.h
+ *
+ * Copyright (c) 2002 Intel Corp.
+ * Copyright (c) 2003-2004 MontaVista Software, Inc.
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ */
+
+#ifndef __ASM_ARCH_MEMORY_H
+#define __ASM_ARCH_MEMORY_H
+
+#define PHYS_OFFSET	UL(0x00000000)
+
+/*
+ * Virtual view <-> DMA view memory address translations
+ * virt_to_bus: Used to translate the virtual address to an
+ *		address suitable to be passed to set_dma_addr
+ * bus_to_virt: Used to convert an address for DMA operations
+ *		to an address that the kernel can use.
+ */
+#include <mach/ixp2000-regs.h>
+
+#define __virt_to_bus(v) \
+	(((__virt_to_phys(v) - 0x0) + (*IXP2000_PCI_SDRAM_BAR & 0xfffffff0)))
+
+#define __bus_to_virt(b) \
+	__phys_to_virt((((b - (*IXP2000_PCI_SDRAM_BAR & 0xfffffff0)) + 0x0)))
+
+#endif
+
diff --git a/arch/arm/mach-ixp2000/include/mach/platform.h b/arch/arm/mach-ixp2000/include/mach/platform.h
new file mode 100644
index 000000000000..42182c79ed90
--- /dev/null
+++ b/arch/arm/mach-ixp2000/include/mach/platform.h
@@ -0,0 +1,152 @@
+/*
+ * arch/arm/mach-ixp2000/include/mach/platform.h
+ *
+ * Various bits of code used by platform-level code.
+ *
+ * Author: Deepak Saxena <dsaxena@plexity.net>
+ *
+ * Copyright 2004 (c) MontaVista Software, Inc. 
+ * 
+ * This file is licensed under  the terms of the GNU General Public 
+ * License version 2. This program is licensed "as is" without any 
+ * warranty of any kind, whether express or implied.
+ */
+
+
+#ifndef __ASSEMBLY__
+
+static inline unsigned long ixp2000_reg_read(volatile void *reg)
+{
+	return *((volatile unsigned long *)reg);
+}
+
+static inline void ixp2000_reg_write(volatile void *reg, unsigned long val)
+{
+	*((volatile unsigned long *)reg) = val;
+}
+
+/*
+ * On the IXP2400, we can't use XCB=000 due to chip bugs.  We use
+ * XCB=101 instead, but that makes all I/O accesses bufferable.  This
+ * is not a problem in general, but we do have to be slightly more
+ * careful because I/O writes are no longer automatically flushed out
+ * of the write buffer.
+ *
+ * In cases where we want to make sure that a write has been flushed
+ * out of the write buffer before we proceed, for example when masking
+ * a device interrupt before re-enabling IRQs in CPSR, we can use this
+ * function, ixp2000_reg_wrb, which performs a write, a readback, and
+ * issues a dummy instruction dependent on the value of the readback
+ * (mov rX, rX) to make sure that the readback has completed before we
+ * continue.
+ */
+static inline void ixp2000_reg_wrb(volatile void *reg, unsigned long val)
+{
+	unsigned long dummy;
+
+	*((volatile unsigned long *)reg) = val;
+
+	dummy = *((volatile unsigned long *)reg);
+	__asm__ __volatile__("mov %0, %0" : "+r" (dummy));
+}
+
+/*
+ * Boards may multiplex different devices on the 2nd channel of 
+ * the slowport interface that each need different configuration 
+ * settings.  For example, the IXDP2400 uses channel 2 on the interface 
+ * to access the CPLD, the switch fabric card, and the media card.  Each
+ * one needs a different mode so drivers must save/restore the mode 
+ * before and after each operation.  
+ *
+ * acquire_slowport(&your_config);
+ * ...
+ * do slowport operations
+ * ...
+ * release_slowport();
+ *
+ * Note that while you have the slowport, you are holding a spinlock,
+ * so your code should be written as if you explicitly acquired a lock.
+ *
+ * The configuration only affects device 2 on the slowport, so the
+ * MTD map driver does not acquire/release the slowport.  
+ */
+struct slowport_cfg {
+	unsigned long CCR;	/* Clock divide */
+	unsigned long WTC;	/* Write Timing Control */
+	unsigned long RTC;	/* Read Timing Control */
+	unsigned long PCR;	/* Protocol Control Register */
+	unsigned long ADC;	/* Address/Data Width Control */
+};
+
+
+void ixp2000_acquire_slowport(struct slowport_cfg *, struct slowport_cfg *);
+void ixp2000_release_slowport(struct slowport_cfg *);
+
+/*
+ * IXP2400 A0/A1 and  IXP2800 A0/A1/A2 have broken slowport that requires
+ * tweaking of addresses in the MTD driver.
+ */
+static inline unsigned ixp2000_has_broken_slowport(void)
+{
+	unsigned long id = *IXP2000_PRODUCT_ID;
+	unsigned long id_prod = id & (IXP2000_MAJ_PROD_TYPE_MASK |
+				      IXP2000_MIN_PROD_TYPE_MASK);
+	return (((id_prod ==
+		  /* fixed in IXP2400-B0 */
+		  (IXP2000_MAJ_PROD_TYPE_IXP2000 |
+		   IXP2000_MIN_PROD_TYPE_IXP2400)) &&
+		 ((id & IXP2000_MAJ_REV_MASK) == 0)) ||
+		((id_prod ==
+		  /* fixed in IXP2800-B0 */
+		  (IXP2000_MAJ_PROD_TYPE_IXP2000 |
+		   IXP2000_MIN_PROD_TYPE_IXP2800)) &&
+		 ((id & IXP2000_MAJ_REV_MASK) == 0)) ||
+		((id_prod ==
+		  /* fixed in IXP2850-B0 */
+		  (IXP2000_MAJ_PROD_TYPE_IXP2000 |
+		   IXP2000_MIN_PROD_TYPE_IXP2850)) &&
+		 ((id & IXP2000_MAJ_REV_MASK) == 0)));
+}
+
+static inline unsigned int ixp2000_has_flash(void)
+{
+	return ((*IXP2000_STRAP_OPTIONS) & (CFG_BOOT_PROM));
+}
+
+static inline unsigned int ixp2000_is_pcimaster(void)
+{
+	return ((*IXP2000_STRAP_OPTIONS) & (CFG_PCI_BOOT_HOST));
+}
+
+void ixp2000_map_io(void);
+void ixp2000_uart_init(void);
+void ixp2000_init_irq(void);
+void ixp2000_init_time(unsigned long);
+unsigned long ixp2000_gettimeoffset(void);
+
+struct pci_sys_data;
+
+u32 *ixp2000_pci_config_addr(unsigned int bus, unsigned int devfn, int where);
+void ixp2000_pci_preinit(void);
+int ixp2000_pci_setup(int, struct pci_sys_data*);
+struct pci_bus* ixp2000_pci_scan_bus(int, struct pci_sys_data*);
+int ixp2000_pci_read_config(struct pci_bus*, unsigned int, int, int, u32 *);
+int ixp2000_pci_write_config(struct pci_bus*, unsigned int, int, int, u32);
+
+/*
+ * Several of the IXP2000 systems have banked flash so we need to extend the
+ * flash_platform_data structure with some private pointers
+ */
+struct ixp2000_flash_data {
+	struct flash_platform_data *platform_data;
+	int nr_banks;
+	unsigned long (*bank_setup)(unsigned long);
+};
+
+struct ixp2000_i2c_pins {
+	unsigned long sda_pin;
+	unsigned long scl_pin;
+};
+
+
+#endif /*  !__ASSEMBLY__ */
diff --git a/arch/arm/mach-ixp2000/include/mach/system.h b/arch/arm/mach-ixp2000/include/mach/system.h
new file mode 100644
index 000000000000..2e9c68f95a24
--- /dev/null
+++ b/arch/arm/mach-ixp2000/include/mach/system.h
@@ -0,0 +1,49 @@
+/*
+ * arch/arm/mach-ixp2000/include/mach/system.h
+ *
+ * Copyright (C) 2002 Intel Corp.
+ * Copyricht (C) 2003-2005 MontaVista Software, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <mach/hardware.h>
+#include <asm/mach-types.h>
+
+static inline void arch_idle(void)
+{
+	cpu_do_idle();
+}
+
+static inline void arch_reset(char mode)
+{
+	local_irq_disable();
+
+	/*
+	 * Reset flash banking register so that we are pointing at
+	 * RedBoot bank.
+	 */
+	if (machine_is_ixdp2401()) {
+		ixp2000_reg_write(IXDP2X01_CPLD_FLASH_REG,
+					((0 >> IXDP2X01_FLASH_WINDOW_BITS)
+						| IXDP2X01_CPLD_FLASH_INTERN));
+		ixp2000_reg_wrb(IXDP2X01_CPLD_RESET_REG, 0xffffffff);
+	}
+
+	/*
+	 * On IXDP2801 we need to write this magic sequence to the CPLD
+	 * to cause a complete reset of the CPU and all external devices
+	 * and move the flash bank register back to 0.
+	 */
+	if (machine_is_ixdp2801() || machine_is_ixdp28x5()) {
+		unsigned long reset_reg = *IXDP2X01_CPLD_RESET_REG;
+
+		reset_reg = 0x55AA0000 | (reset_reg & 0x0000FFFF);
+		ixp2000_reg_write(IXDP2X01_CPLD_RESET_REG, reset_reg);
+		ixp2000_reg_wrb(IXDP2X01_CPLD_RESET_REG, 0x80000000);
+	}
+
+	ixp2000_reg_wrb(IXP2000_RESET0, RSTALL);
+}
diff --git a/arch/arm/mach-ixp2000/include/mach/timex.h b/arch/arm/mach-ixp2000/include/mach/timex.h
new file mode 100644
index 000000000000..835e659f93d4
--- /dev/null
+++ b/arch/arm/mach-ixp2000/include/mach/timex.h
@@ -0,0 +1,13 @@
+/*
+ * arch/arm/mach-ixp2000/include/mach/timex.h
+ *
+ * IXP2000 architecture timex specifications
+ */
+
+
+/*
+ * Default clock is 50MHz APB, but platform code can override this
+ */
+#define CLOCK_TICK_RATE	50000000
+
+
diff --git a/arch/arm/mach-ixp2000/include/mach/uncompress.h b/arch/arm/mach-ixp2000/include/mach/uncompress.h
new file mode 100644
index 000000000000..ce363087df78
--- /dev/null
+++ b/arch/arm/mach-ixp2000/include/mach/uncompress.h
@@ -0,0 +1,47 @@
+/*
+ * arch/arm/mach-ixp2000/include/mach/uncompress.h
+ *
+ *
+ * Original Author: Naeem Afzal <naeem.m.afzal@intel.com>
+ * Maintainer: Deepak Saxena <dsaxena@plexity.net>
+ *
+ * Copyright 2002 Intel Corp.
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ *
+ */
+
+#include <linux/serial_reg.h>
+
+#define UART_BASE	0xc0030000
+
+#define PHYS(x)          ((volatile unsigned long *)(UART_BASE + x))
+
+#define UARTDR          PHYS(0x00)      /* Transmit reg dlab=0 */
+#define UARTDLL         PHYS(0x00)      /* Divisor Latch reg dlab=1*/
+#define UARTDLM         PHYS(0x04)      /* Divisor Latch reg dlab=1*/
+#define UARTIER         PHYS(0x04)      /* Interrupt enable reg */
+#define UARTFCR         PHYS(0x08)      /* FIFO control reg dlab =0*/
+#define UARTLCR         PHYS(0x0c)      /* Control reg */
+#define UARTSR          PHYS(0x14)      /* Status reg */
+
+
+static inline void putc(int c)
+{
+	int j = 0x1000;
+
+	while (--j && !(*UARTSR & UART_LSR_THRE))
+		barrier();
+
+	*UARTDR = c;
+}
+
+static inline void flush(void)
+{
+}
+
+#define arch_decomp_setup()
+#define arch_decomp_wdog()
diff --git a/arch/arm/mach-ixp2000/include/mach/vmalloc.h b/arch/arm/mach-ixp2000/include/mach/vmalloc.h
new file mode 100644
index 000000000000..d195e35aed3b
--- /dev/null
+++ b/arch/arm/mach-ixp2000/include/mach/vmalloc.h
@@ -0,0 +1,20 @@
+/*
+ * arch/arm/mach-ixp2000/include/mach/vmalloc.h
+ *
+ * Author: Naeem Afzal <naeem.m.afzal@intel.com>
+ *
+ * Copyright 2002 Intel Corp.
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ *
+ * Just any arbitrary offset to the start of the vmalloc VM area: the
+ * current 8MB value just means that there will be a 8MB "hole" after the
+ * physical memory until the kernel virtual memory starts.  That means that
+ * any out-of-bounds memory accesses will hopefully be caught.
+ * The vmalloc() routines leaves a hole of 4kB between each vmalloced
+ * area for the same reason. ;)
+ */
+#define VMALLOC_END	    0xfb000000
diff --git a/arch/arm/mach-ixp2000/ixdp2400.c b/arch/arm/mach-ixp2000/ixdp2400.c
index ce7c15c73004..c673b9ef9f69 100644
--- a/arch/arm/mach-ixp2000/ixdp2400.c
+++ b/arch/arm/mach-ixp2000/ixdp2400.c
@@ -31,7 +31,7 @@
 #include <asm/pgtable.h>
 #include <asm/page.h>
 #include <asm/system.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/mach-types.h>
 
 #include <asm/mach/pci.h>
diff --git a/arch/arm/mach-ixp2000/ixdp2800.c b/arch/arm/mach-ixp2000/ixdp2800.c
index 14f09b80ab77..6715b50829a6 100644
--- a/arch/arm/mach-ixp2000/ixdp2800.c
+++ b/arch/arm/mach-ixp2000/ixdp2800.c
@@ -31,7 +31,7 @@
 #include <asm/pgtable.h>
 #include <asm/page.h>
 #include <asm/system.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/mach-types.h>
 
 #include <asm/mach/pci.h>
diff --git a/arch/arm/mach-ixp2000/ixdp2x00.c b/arch/arm/mach-ixp2000/ixdp2x00.c
index 73c651e83d92..5a781fd9757a 100644
--- a/arch/arm/mach-ixp2000/ixdp2x00.c
+++ b/arch/arm/mach-ixp2000/ixdp2x00.c
@@ -31,7 +31,7 @@
 #include <asm/pgtable.h>
 #include <asm/page.h>
 #include <asm/system.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/mach-types.h>
 
 #include <asm/mach/pci.h>
@@ -41,7 +41,7 @@
 #include <asm/mach/flash.h>
 #include <asm/mach/arch.h>
 
-#include <asm/arch/gpio.h>
+#include <mach/gpio.h>
 
 
 /*************************************************************************
diff --git a/arch/arm/mach-ixp2000/ixdp2x01.c b/arch/arm/mach-ixp2000/ixdp2x01.c
index d3d730d2fc2b..78a2341dee2c 100644
--- a/arch/arm/mach-ixp2000/ixdp2x01.c
+++ b/arch/arm/mach-ixp2000/ixdp2x01.c
@@ -36,7 +36,7 @@
 #include <asm/pgtable.h>
 #include <asm/page.h>
 #include <asm/system.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/mach-types.h>
 
 #include <asm/mach/pci.h>
diff --git a/arch/arm/mach-ixp2000/pci.c b/arch/arm/mach-ixp2000/pci.c
index 03f4cf7f9dec..03d916fbe531 100644
--- a/arch/arm/mach-ixp2000/pci.c
+++ b/arch/arm/mach-ixp2000/pci.c
@@ -28,7 +28,7 @@
 #include <asm/io.h>
 #include <asm/irq.h>
 #include <asm/system.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 
 #include <asm/mach/pci.h>
 
diff --git a/arch/arm/mach-ixp23xx/core.c b/arch/arm/mach-ixp23xx/core.c
index 5fea5a132939..68b4ac5b2481 100644
--- a/arch/arm/mach-ixp23xx/core.c
+++ b/arch/arm/mach-ixp23xx/core.c
@@ -32,8 +32,7 @@
 #include <asm/types.h>
 #include <asm/setup.h>
 #include <asm/memory.h>
-#include <asm/hardware.h>
-#include <asm/mach-types.h>
+#include <mach/hardware.h>
 #include <asm/irq.h>
 #include <asm/system.h>
 #include <asm/tlbflush.h>
@@ -126,23 +125,23 @@ static int ixp23xx_irq_set_type(unsigned int irq, unsigned int type)
 		return -EINVAL;
 
 	switch (type) {
-	case IRQT_BOTHEDGE:
+	case IRQ_TYPE_EDGE_BOTH:
 		int_style = IXP23XX_GPIO_STYLE_TRANSITIONAL;
 		irq_type = IXP23XX_IRQ_EDGE;
 		break;
-	case IRQT_RISING:
+	case IRQ_TYPE_EDGE_RISING:
 		int_style = IXP23XX_GPIO_STYLE_RISING_EDGE;
 		irq_type = IXP23XX_IRQ_EDGE;
 		break;
-	case IRQT_FALLING:
+	case IRQ_TYPE_EDGE_FALLING:
 		int_style = IXP23XX_GPIO_STYLE_FALLING_EDGE;
 		irq_type = IXP23XX_IRQ_EDGE;
 		break;
-	case IRQT_HIGH:
+	case IRQ_TYPE_LEVEL_HIGH:
 		int_style = IXP23XX_GPIO_STYLE_ACTIVE_HIGH;
 		irq_type = IXP23XX_IRQ_LEVEL;
 		break;
-	case IRQT_LOW:
+	case IRQ_TYPE_LEVEL_LOW:
 		int_style = IXP23XX_GPIO_STYLE_ACTIVE_LOW;
 		irq_type = IXP23XX_IRQ_LEVEL;
 		break;
diff --git a/arch/arm/mach-ixp23xx/espresso.c b/arch/arm/mach-ixp23xx/espresso.c
index d3a779a7a35f..1c06bfc5a7ef 100644
--- a/arch/arm/mach-ixp23xx/espresso.c
+++ b/arch/arm/mach-ixp23xx/espresso.c
@@ -29,7 +29,7 @@
 #include <asm/types.h>
 #include <asm/setup.h>
 #include <asm/memory.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/irq.h>
 #include <asm/system.h>
diff --git a/arch/arm/mach-ixp23xx/include/mach/debug-macro.S b/arch/arm/mach-ixp23xx/include/mach/debug-macro.S
new file mode 100644
index 000000000000..905db3188724
--- /dev/null
+++ b/arch/arm/mach-ixp23xx/include/mach/debug-macro.S
@@ -0,0 +1,26 @@
+/*
+ * arch/arm/mach-ixp23xx/include/mach/debug-macro.S
+ *
+ * Debugging macro include header
+ *
+ * Copyright (C) 1994-1999 Russell King
+ * Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <mach/ixp23xx.h>
+
+		.macro	addruart,rx
+		mrc	p15, 0, \rx, c1, c0
+		tst	\rx, #1				@ mmu enabled?
+		ldreq	\rx, =IXP23XX_PERIPHERAL_PHYS 	@ physical
+		ldrne	\rx, =IXP23XX_PERIPHERAL_VIRT	@ virtual
+#ifdef __ARMEB__
+		orr	\rx, \rx, #0x00000003
+#endif
+		.endm
+
+#define UART_SHIFT	2
+#include <asm/hardware/debug-8250.S>
diff --git a/arch/arm/mach-ixp23xx/include/mach/dma.h b/arch/arm/mach-ixp23xx/include/mach/dma.h
new file mode 100644
index 000000000000..8886544b93f7
--- /dev/null
+++ b/arch/arm/mach-ixp23xx/include/mach/dma.h
@@ -0,0 +1,3 @@
+/*
+ * arch/arm/mach-ixp23xx/include/mach/dma.h
+ */
diff --git a/arch/arm/mach-ixp23xx/include/mach/entry-macro.S b/arch/arm/mach-ixp23xx/include/mach/entry-macro.S
new file mode 100644
index 000000000000..3f5338a7bbdd
--- /dev/null
+++ b/arch/arm/mach-ixp23xx/include/mach/entry-macro.S
@@ -0,0 +1,37 @@
+/*
+ * arch/arm/mach-ixp23xx/include/mach/entry-macro.S
+ */
+
+		.macro	disable_fiq
+		.endm
+
+		.macro  get_irqnr_preamble, base, tmp
+		.endm
+
+		.macro  arch_ret_to_user, tmp1, tmp2
+		.endm
+
+		.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
+		ldr	\irqnr, =(IXP23XX_INTC_VIRT + IXP23XX_INTR_IRQ_ENC_ST_OFFSET)
+		ldr	\irqnr, [\irqnr]	@ get interrupt number
+		cmp	\irqnr, #0x0		@ spurious interrupt ?
+		movne	\irqnr, \irqnr, lsr #2	@ skip unwanted low order bits
+		subne	\irqnr, \irqnr, #1	@ convert to 0 based
+
+#if 0
+		cmp	\irqnr, #IRQ_IXP23XX_PCI_INT_RPH
+		bne	1001f
+		mov	\irqnr, #IRQ_IXP23XX_INTA
+
+		ldr	\irqnr, =0xf5000030
+
+		mov	\tmp, #(1<<26)
+		tst	\irqnr, \tmp
+		movne	\irqnr, #IRQ_IXP23XX_INTB
+
+		mov	\tmp, #(1<<27)
+		tst	\irqnr, \tmp
+		movne	\irqnr, #IRQ_IXP23XX_INTA
+1001:
+#endif
+		.endm
diff --git a/arch/arm/mach-ixp23xx/include/mach/hardware.h b/arch/arm/mach-ixp23xx/include/mach/hardware.h
new file mode 100644
index 000000000000..c3192009a886
--- /dev/null
+++ b/arch/arm/mach-ixp23xx/include/mach/hardware.h
@@ -0,0 +1,37 @@
+/*
+ * arch/arm/mach-ixp23xx/include/mach/hardware.h
+ *
+ * Copyright (C) 2002-2004 Intel Corporation.
+ * Copyricht (C) 2005 MontaVista Software, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Hardware definitions for IXP23XX based systems
+ */
+
+#ifndef __ASM_ARCH_HARDWARE_H
+#define __ASM_ARCH_HARDWARE_H
+
+/* PCI IO info */
+#define PCIO_BASE		IXP23XX_PCI_IO_VIRT
+#define PCIBIOS_MIN_IO		0x00000000
+#define PCIBIOS_MIN_MEM		0xe0000000
+
+#include "ixp23xx.h"
+
+#define pcibios_assign_all_busses()	0
+
+/*
+ * Platform helper functions
+ */
+#include "platform.h"
+
+/*
+ * Platform-specific headers
+ */
+#include "ixdp2351.h"
+
+
+#endif
diff --git a/arch/arm/mach-ixp23xx/include/mach/io.h b/arch/arm/mach-ixp23xx/include/mach/io.h
new file mode 100644
index 000000000000..305ea1808c71
--- /dev/null
+++ b/arch/arm/mach-ixp23xx/include/mach/io.h
@@ -0,0 +1,54 @@
+/*
+ * arch/arm/mach-ixp23xx/include/mach/io.h
+ *
+ * Original Author: Naeem M Afzal <naeem.m.afzal@intel.com>
+ * Maintainer: Deepak Saxena <dsaxena@plexity.net>
+ *
+ * Copyright (C) 2003-2005 Intel Corp.
+ * Copyright (C) 2005 MontaVista Software, Inc
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_IO_H
+#define __ASM_ARCH_IO_H
+
+#define IO_SPACE_LIMIT 0xffffffff
+
+#define __io(p)		((void __iomem*)((p) + IXP23XX_PCI_IO_VIRT))
+#define __mem_pci(a)	(a)
+
+#include <linux/kernel.h>	/* For BUG */
+
+static inline void __iomem *
+ixp23xx_ioremap(unsigned long addr, unsigned long size, unsigned int mtype)
+{
+	if (addr >= IXP23XX_PCI_MEM_START &&
+		addr <= IXP23XX_PCI_MEM_START + IXP23XX_PCI_MEM_SIZE) {
+		if (addr + size > IXP23XX_PCI_MEM_START + IXP23XX_PCI_MEM_SIZE)
+			return NULL;
+
+		return (void __iomem *)
+ 			((addr - IXP23XX_PCI_MEM_START) + IXP23XX_PCI_MEM_VIRT);
+	}
+
+	return __arm_ioremap(addr, size, mtype);
+}
+
+static inline void
+ixp23xx_iounmap(void __iomem *addr)
+{
+	if ((((u32)addr) >= IXP23XX_PCI_MEM_VIRT) &&
+	    (((u32)addr) < IXP23XX_PCI_MEM_VIRT + IXP23XX_PCI_MEM_SIZE))
+		return;
+
+	__iounmap(addr);
+}
+
+#define __arch_ioremap(a,s,f)	ixp23xx_ioremap(a,s,f)
+#define __arch_iounmap(a)	ixp23xx_iounmap(a)
+
+
+#endif
diff --git a/arch/arm/mach-ixp23xx/include/mach/irqs.h b/arch/arm/mach-ixp23xx/include/mach/irqs.h
new file mode 100644
index 000000000000..3af33a04b8a2
--- /dev/null
+++ b/arch/arm/mach-ixp23xx/include/mach/irqs.h
@@ -0,0 +1,223 @@
+/*
+ * arch/arm/mach-ixp23xx/include/mach/irqs.h
+ *
+ * IRQ definitions for IXP23XX based systems
+ *
+ * Author: Naeem Afzal <naeem.m.afzal@intel.com>
+ *
+ * Copyright (C) 2003-2004 Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_IRQS_H
+#define __ASM_ARCH_IRQS_H
+
+#define NR_IXP23XX_IRQS			IRQ_IXP23XX_INTB+1
+#define IRQ_IXP23XX_EXTIRQS		NR_IXP23XX_IRQS
+
+
+#define IRQ_IXP23XX_DBG0		0	/* Debug/Execution/MBox */
+#define IRQ_IXP23XX_DBG1		1	/* Debug/Execution/MBox */
+#define IRQ_IXP23XX_NPE_TRG		2	/* npe_trigger */
+#define IRQ_IXP23XX_TIMER1		3	/* Timer[0] */
+#define IRQ_IXP23XX_TIMER2		4	/* Timer[1] */
+#define IRQ_IXP23XX_TIMESTAMP		5	/* Timer[2], Time-stamp */
+#define IRQ_IXP23XX_WDOG		6	/* Time[3], Watchdog Timer */
+#define IRQ_IXP23XX_PCI_DBELL		7	/* PCI Doorbell */
+#define IRQ_IXP23XX_PCI_DMA1		8	/* PCI DMA Channel 1 */
+#define IRQ_IXP23XX_PCI_DMA2		9	/* PCI DMA Channel 2 */
+#define IRQ_IXP23XX_PCI_DMA3		10	/* PCI DMA Channel 3 */
+#define IRQ_IXP23XX_PCI_INT_RPH		11	/* pcxg_pci_int_rph */
+#define IRQ_IXP23XX_CPP_PMU		12	/* xpxg_pm_int_rpl */
+#define IRQ_IXP23XX_SWINT0		13	/* S/W Interrupt0 */
+#define IRQ_IXP23XX_SWINT1		14	/* S/W Interrupt1 */
+#define IRQ_IXP23XX_UART2		15	/* UART1 Interrupt */
+#define IRQ_IXP23XX_UART1		16	/* UART0 Interrupt */
+#define IRQ_IXP23XX_XSI_PMU_ROLLOVER	17	/* AHB Performance M. Unit counter rollover */
+#define IRQ_IXP23XX_XSI_AHB_PM0		18	/* intr_pm_o */
+#define IRQ_IXP23XX_XSI_AHB_ECE0	19	/* intr_ece_o */
+#define IRQ_IXP23XX_XSI_AHB_GASKET	20	/* gas_intr_o */
+#define IRQ_IXP23XX_XSI_CPP		21	/* xsi2cpp_int */
+#define IRQ_IXP23XX_CPP_XSI		22	/* cpp2xsi_int */
+#define IRQ_IXP23XX_ME_ATTN0		23	/* ME_ATTN */
+#define IRQ_IXP23XX_ME_ATTN1		24	/* ME_ATTN */
+#define IRQ_IXP23XX_ME_ATTN2		25	/* ME_ATTN */
+#define IRQ_IXP23XX_ME_ATTN3		26	/* ME_ATTN */
+#define IRQ_IXP23XX_PCI_ERR_RPH		27	/* PCXG_PCI_ERR_RPH */
+#define IRQ_IXP23XX_D0XG_ECC_CORR	28	/* D0XG_DRAM_ECC_CORR */
+#define IRQ_IXP23XX_D0XG_ECC_UNCORR	29	/* D0XG_DRAM_ECC_UNCORR */
+#define IRQ_IXP23XX_SRAM_ERR1		30	/* SRAM1_ERR */
+#define IRQ_IXP23XX_SRAM_ERR0		31	/* SRAM0_ERR */
+#define IRQ_IXP23XX_MEDIA_ERR		32	/* MEDIA_ERR */
+#define IRQ_IXP23XX_STH_DRAM_ECC_MAJ	33	/* STH_DRAM0_ECC_MAJ */
+#define IRQ_IXP23XX_GPIO6		34	/* GPIO0 interrupts */
+#define IRQ_IXP23XX_GPIO7		35	/* GPIO1 interrupts */
+#define IRQ_IXP23XX_GPIO8		36	/* GPIO2 interrupts */
+#define IRQ_IXP23XX_GPIO9		37	/* GPIO3 interrupts */
+#define IRQ_IXP23XX_GPIO10		38	/* GPIO4 interrupts */
+#define IRQ_IXP23XX_GPIO11		39	/* GPIO5 interrupts */
+#define IRQ_IXP23XX_GPIO12		40	/* GPIO6 interrupts */
+#define IRQ_IXP23XX_GPIO13		41	/* GPIO7 interrupts */
+#define IRQ_IXP23XX_GPIO14		42	/* GPIO8 interrupts */
+#define IRQ_IXP23XX_GPIO15		43	/* GPIO9 interrupts */
+#define IRQ_IXP23XX_SHAC_RING0		44	/* SHAC Ring Full */
+#define IRQ_IXP23XX_SHAC_RING1		45	/* SHAC Ring Full */
+#define IRQ_IXP23XX_SHAC_RING2		46	/* SHAC Ring Full */
+#define IRQ_IXP23XX_SHAC_RING3		47	/* SHAC Ring Full */
+#define IRQ_IXP23XX_SHAC_RING4		48	/* SHAC Ring Full */
+#define IRQ_IXP23XX_SHAC_RING5		49	/* SHAC Ring Full */
+#define IRQ_IXP23XX_SHAC_RING6		50	/* SHAC RING Full */
+#define IRQ_IXP23XX_SHAC_RING7		51	/* SHAC Ring Full */
+#define IRQ_IXP23XX_SHAC_RING8		52	/* SHAC Ring Full */
+#define IRQ_IXP23XX_SHAC_RING9		53	/* SHAC Ring Full */
+#define IRQ_IXP23XX_SHAC_RING10		54	/* SHAC Ring Full */
+#define IRQ_IXP23XX_SHAC_RING11		55	/* SHAC Ring Full */
+#define IRQ_IXP23XX_ME_THREAD_A0_ME0	56	/* ME_THREAD_A */
+#define IRQ_IXP23XX_ME_THREAD_A1_ME0	57	/* ME_THREAD_A */
+#define IRQ_IXP23XX_ME_THREAD_A2_ME0	58	/* ME_THREAD_A */
+#define IRQ_IXP23XX_ME_THREAD_A3_ME0	59	/* ME_THREAD_A */
+#define IRQ_IXP23XX_ME_THREAD_A4_ME0	60	/* ME_THREAD_A */
+#define IRQ_IXP23XX_ME_THREAD_A5_ME0	61	/* ME_THREAD_A */
+#define IRQ_IXP23XX_ME_THREAD_A6_ME0	62	/* ME_THREAD_A */
+#define IRQ_IXP23XX_ME_THREAD_A7_ME0	63	/* ME_THREAD_A */
+#define IRQ_IXP23XX_ME_THREAD_A8_ME1	64	/* ME_THREAD_A */
+#define IRQ_IXP23XX_ME_THREAD_A9_ME1	65	/* ME_THREAD_A */
+#define IRQ_IXP23XX_ME_THREAD_A10_ME1	66	/* ME_THREAD_A */
+#define IRQ_IXP23XX_ME_THREAD_A11_ME1	67	/* ME_THREAD_A */
+#define IRQ_IXP23XX_ME_THREAD_A12_ME1	68	/* ME_THREAD_A */
+#define IRQ_IXP23XX_ME_THREAD_A13_ME1	69	/* ME_THREAD_A */
+#define IRQ_IXP23XX_ME_THREAD_A14_ME1	70	/* ME_THREAD_A */
+#define IRQ_IXP23XX_ME_THREAD_A15_ME1	71	/* ME_THREAD_A */
+#define IRQ_IXP23XX_ME_THREAD_A16_ME2	72	/* ME_THREAD_A */
+#define IRQ_IXP23XX_ME_THREAD_A17_ME2	73	/* ME_THREAD_A */
+#define IRQ_IXP23XX_ME_THREAD_A18_ME2	74	/* ME_THREAD_A */
+#define IRQ_IXP23XX_ME_THREAD_A19_ME2	75	/* ME_THREAD_A */
+#define IRQ_IXP23XX_ME_THREAD_A20_ME2	76	/* ME_THREAD_A */
+#define IRQ_IXP23XX_ME_THREAD_A21_ME2	77	/* ME_THREAD_A */
+#define IRQ_IXP23XX_ME_THREAD_A22_ME2	78	/* ME_THREAD_A */
+#define IRQ_IXP23XX_ME_THREAD_A23_ME2	79	/* ME_THREAD_A */
+#define IRQ_IXP23XX_ME_THREAD_A24_ME3	80	/* ME_THREAD_A */
+#define IRQ_IXP23XX_ME_THREAD_A25_ME3	81	/* ME_THREAD_A */
+#define IRQ_IXP23XX_ME_THREAD_A26_ME3	82	/* ME_THREAD_A */
+#define IRQ_IXP23XX_ME_THREAD_A27_ME3	83	/* ME_THREAD_A */
+#define IRQ_IXP23XX_ME_THREAD_A28_ME3	84	/* ME_THREAD_A */
+#define IRQ_IXP23XX_ME_THREAD_A29_ME3	85	/* ME_THREAD_A */
+#define IRQ_IXP23XX_ME_THREAD_A30_ME3	86	/* ME_THREAD_A */
+#define IRQ_IXP23XX_ME_THREAD_A31_ME3	87	/* ME_THREAD_A */
+#define IRQ_IXP23XX_ME_THREAD_B0_ME0	88	/* ME_THREAD_B */
+#define IRQ_IXP23XX_ME_THREAD_B1_ME0	89	/* ME_THREAD_B */
+#define IRQ_IXP23XX_ME_THREAD_B2_ME0	90	/* ME_THREAD_B */
+#define IRQ_IXP23XX_ME_THREAD_B3_ME0	91	/* ME_THREAD_B */
+#define IRQ_IXP23XX_ME_THREAD_B4_ME0	92	/* ME_THREAD_B */
+#define IRQ_IXP23XX_ME_THREAD_B5_ME0	93	/* ME_THREAD_B */
+#define IRQ_IXP23XX_ME_THREAD_B6_ME0	94	/* ME_THREAD_B */
+#define IRQ_IXP23XX_ME_THREAD_B7_ME0	95	/* ME_THREAD_B */
+#define IRQ_IXP23XX_ME_THREAD_B8_ME1	96	/* ME_THREAD_B */
+#define IRQ_IXP23XX_ME_THREAD_B9_ME1	97	/* ME_THREAD_B */
+#define IRQ_IXP23XX_ME_THREAD_B10_ME1	98	/* ME_THREAD_B */
+#define IRQ_IXP23XX_ME_THREAD_B11_ME1	99	/* ME_THREAD_B */
+#define IRQ_IXP23XX_ME_THREAD_B12_ME1	100	/* ME_THREAD_B */
+#define IRQ_IXP23XX_ME_THREAD_B13_ME1	101	/* ME_THREAD_B */
+#define IRQ_IXP23XX_ME_THREAD_B14_ME1	102	/* ME_THREAD_B */
+#define IRQ_IXP23XX_ME_THREAD_B15_ME1	103	/* ME_THREAD_B */
+#define IRQ_IXP23XX_ME_THREAD_B16_ME2	104	/* ME_THREAD_B */
+#define IRQ_IXP23XX_ME_THREAD_B17_ME2	105	/* ME_THREAD_B */
+#define IRQ_IXP23XX_ME_THREAD_B18_ME2	106	/* ME_THREAD_B */
+#define IRQ_IXP23XX_ME_THREAD_B19_ME2	107	/* ME_THREAD_B */
+#define IRQ_IXP23XX_ME_THREAD_B20_ME2	108	/* ME_THREAD_B */
+#define IRQ_IXP23XX_ME_THREAD_B21_ME2	109	/* ME_THREAD_B */
+#define IRQ_IXP23XX_ME_THREAD_B22_ME2	110	/* ME_THREAD_B */
+#define IRQ_IXP23XX_ME_THREAD_B23_ME2	111	/* ME_THREAD_B */
+#define IRQ_IXP23XX_ME_THREAD_B24_ME3	112	/* ME_THREAD_B */
+#define IRQ_IXP23XX_ME_THREAD_B25_ME3	113	/* ME_THREAD_B */
+#define IRQ_IXP23XX_ME_THREAD_B26_ME3	114	/* ME_THREAD_B */
+#define IRQ_IXP23XX_ME_THREAD_B27_ME3	115	/* ME_THREAD_B */
+#define IRQ_IXP23XX_ME_THREAD_B28_ME3	116	/* ME_THREAD_B */
+#define IRQ_IXP23XX_ME_THREAD_B29_ME3	117	/* ME_THREAD_B */
+#define IRQ_IXP23XX_ME_THREAD_B30_ME3	118	/* ME_THREAD_B */
+#define IRQ_IXP23XX_ME_THREAD_B31_ME3	119	/* ME_THREAD_B */
+
+#define NUM_IXP23XX_RAW_IRQS		120
+
+#define IRQ_IXP23XX_INTA		120	/* Indirect pcxg_pci_int_rph */
+#define IRQ_IXP23XX_INTB		121	/* Indirect pcxg_pci_int_rph */
+
+#define NR_IXP23XX_IRQ			(IRQ_IXP23XX_INTB + 1)
+
+/*
+ * We default to 32 per-board IRQs. Increase this number if you need
+ * more, but keep it realistic.
+ */
+#define NR_IXP23XX_MACH_IRQS 		32
+
+#define NR_IRQS				(NR_IXP23XX_IRQS + NR_IXP23XX_MACH_IRQS)
+
+#define IXP23XX_MACH_IRQ(irq) 		(NR_IXP23XX_IRQ + (irq))
+
+
+/*
+ * IXDP2351-specific interrupts
+ */
+
+/*
+ * External PCI interrupts signaled through INTB
+ *
+ */
+#define IXDP2351_INTB_IRQ_BASE 		0
+#define IRQ_IXDP2351_INTA_82546		IXP23XX_MACH_IRQ(0)
+#define IRQ_IXDP2351_INTB_82546		IXP23XX_MACH_IRQ(1)
+#define IRQ_IXDP2351_SPCI_DB_0		IXP23XX_MACH_IRQ(2)
+#define IRQ_IXDP2351_SPCI_DB_1		IXP23XX_MACH_IRQ(3)
+#define IRQ_IXDP2351_SPCI_PMC_INTA	IXP23XX_MACH_IRQ(4)
+#define IRQ_IXDP2351_SPCI_PMC_INTB	IXP23XX_MACH_IRQ(5)
+#define IRQ_IXDP2351_SPCI_PMC_INTC	IXP23XX_MACH_IRQ(6)
+#define IRQ_IXDP2351_SPCI_PMC_INTD	IXP23XX_MACH_IRQ(7)
+#define IRQ_IXDP2351_SPCI_FIC		IXP23XX_MACH_IRQ(8)
+
+#define IXDP2351_INTB_IRQ_BIT(irq)	(irq - IXP23XX_MACH_IRQ(0))
+#define IXDP2351_INTB_IRQ_MASK(irq)	(1 << IXDP2351_INTB_IRQ_BIT(irq))
+#define IXDP2351_INTB_IRQ_VALID		0x01FF
+#define IXDP2351_INTB_IRQ_NUM 		16
+
+/*
+ * Other external interrupts signaled through INTA
+ */
+#define IXDP2351_INTA_IRQ_BASE 		16
+#define IRQ_IXDP2351_IPMI_FROM		IXP23XX_MACH_IRQ(16)
+#define IRQ_IXDP2351_125US		IXP23XX_MACH_IRQ(17)
+#define IRQ_IXDP2351_DB_0_ADD		IXP23XX_MACH_IRQ(18)
+#define IRQ_IXDP2351_DB_1_ADD		IXP23XX_MACH_IRQ(19)
+#define IRQ_IXDP2351_DEBUG1		IXP23XX_MACH_IRQ(20)
+#define IRQ_IXDP2351_ADD_UART		IXP23XX_MACH_IRQ(21)
+#define IRQ_IXDP2351_FIC_ADD		IXP23XX_MACH_IRQ(24)
+#define IRQ_IXDP2351_CS8900		IXP23XX_MACH_IRQ(25)
+#define IRQ_IXDP2351_BBSRAM		IXP23XX_MACH_IRQ(26)
+#define IRQ_IXDP2351_CONFIG_MEDIA	IXP23XX_MACH_IRQ(27)
+#define IRQ_IXDP2351_CLOCK_REF		IXP23XX_MACH_IRQ(28)
+#define IRQ_IXDP2351_A10_NP		IXP23XX_MACH_IRQ(29)
+#define IRQ_IXDP2351_A11_NP		IXP23XX_MACH_IRQ(30)
+#define IRQ_IXDP2351_DEBUG_NP		IXP23XX_MACH_IRQ(31)
+
+#define IXDP2351_INTA_IRQ_BIT(irq) 	(irq - IXP23XX_MACH_IRQ(16))
+#define IXDP2351_INTA_IRQ_MASK(irq) 	(1 << IXDP2351_INTA_IRQ_BIT(irq))
+#define IXDP2351_INTA_IRQ_VALID 	0xFF3F
+#define IXDP2351_INTA_IRQ_NUM 		16
+
+
+/*
+ * ADI RoadRunner IRQs
+ */
+#define IRQ_ROADRUNNER_PCI_INTA 	IRQ_IXP23XX_INTA
+#define IRQ_ROADRUNNER_PCI_INTB 	IRQ_IXP23XX_INTB
+#define IRQ_ROADRUNNER_PCI_INTC 	IRQ_IXP23XX_GPIO11
+#define IRQ_ROADRUNNER_PCI_INTD 	IRQ_IXP23XX_GPIO12
+
+/*
+ * Put new board definitions here
+ */
+
+
+#endif
diff --git a/include/asm-arm/arch-ixp23xx/ixdp2351.h b/arch/arm/mach-ixp23xx/include/mach/ixdp2351.h
index d5e8a43d7bbd..663951027de5 100644
--- a/include/asm-arm/arch-ixp23xx/ixdp2351.h
+++ b/arch/arm/mach-ixp23xx/include/mach/ixdp2351.h
@@ -1,5 +1,5 @@
 /*
- * include/asm-arm/arch-ixp23xx/ixdp2351.h
+ * arch/arm/mach-ixp23xx/include/mach/ixdp2351.h
  *
  * Register and other defines for IXDP2351
  *
diff --git a/include/asm-arm/arch-ixp23xx/ixp23xx.h b/arch/arm/mach-ixp23xx/include/mach/ixp23xx.h
index 3927b1d61b17..6d02481b1d6d 100644
--- a/include/asm-arm/arch-ixp23xx/ixp23xx.h
+++ b/arch/arm/mach-ixp23xx/include/mach/ixp23xx.h
@@ -1,5 +1,5 @@
 /*
- * include/asm-arm/arch-ixp23xx/ixp23xx.h
+ * arch/arm/mach-ixp23xx/include/mach/ixp23xx.h
  *
  * Register definitions for IXP23XX
  *
diff --git a/arch/arm/mach-ixp23xx/include/mach/memory.h b/arch/arm/mach-ixp23xx/include/mach/memory.h
new file mode 100644
index 000000000000..9d40115f7ebe
--- /dev/null
+++ b/arch/arm/mach-ixp23xx/include/mach/memory.h
@@ -0,0 +1,48 @@
+/*
+ * arch/arm/mach-ixp23xx/include/mach/memory.h
+ *
+ * Copyright (c) 2003-2004 Intel Corp.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#ifndef __ASM_ARCH_MEMORY_H
+#define __ASM_ARCH_MEMORY_H
+
+#include <mach/hardware.h>
+
+/*
+ * Physical DRAM offset.
+ */
+#define PHYS_OFFSET		(0x00000000)
+
+
+/*
+ * Virtual view <-> DMA view memory address translations
+ * virt_to_bus: Used to translate the virtual address to an
+ *		address suitable to be passed to set_dma_addr
+ * bus_to_virt: Used to convert an address for DMA operations
+ *		to an address that the kernel can use.
+ */
+#ifndef __ASSEMBLY__
+
+#define __virt_to_bus(v)						\
+	({ unsigned int ret;						\
+	ret = ((__virt_to_phys(v) - 0x00000000) +			\
+	 (*((volatile int *)IXP23XX_PCI_SDRAM_BAR) & 0xfffffff0)); 	\
+	ret; })
+
+#define __bus_to_virt(b)						\
+	({ unsigned int data;						\
+	data = *((volatile int *)IXP23XX_PCI_SDRAM_BAR);		\
+	 __phys_to_virt((((b - (data & 0xfffffff0)) + 0x00000000))); })
+
+#define arch_is_coherent()	1
+
+#endif
+
+
+#endif
diff --git a/arch/arm/mach-ixp23xx/include/mach/platform.h b/arch/arm/mach-ixp23xx/include/mach/platform.h
new file mode 100644
index 000000000000..db9d9416e5e4
--- /dev/null
+++ b/arch/arm/mach-ixp23xx/include/mach/platform.h
@@ -0,0 +1,57 @@
+/*
+ * arch/arm/mach-ixp23xx/include/mach/platform.h
+ *
+ * Various bits of code used by platform-level code.
+ *
+ * Author: Deepak Saxena <dsaxena@plexity.net>
+ *
+ * Copyright 2005 (c) MontaVista Software, Inc.
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __ASSEMBLY__
+
+static inline unsigned long ixp2000_reg_read(volatile void *reg)
+{
+	return *((volatile unsigned long *)reg);
+}
+
+static inline void ixp2000_reg_write(volatile void *reg, unsigned long val)
+{
+	*((volatile unsigned long *)reg) = val;
+}
+
+static inline void ixp2000_reg_wrb(volatile void *reg, unsigned long val)
+{
+	*((volatile unsigned long *)reg) = val;
+}
+
+struct pci_sys_data;
+
+void ixp23xx_map_io(void);
+void ixp23xx_init_irq(void);
+void ixp23xx_sys_init(void);
+int ixp23xx_pci_setup(int, struct pci_sys_data *);
+void ixp23xx_pci_preinit(void);
+struct pci_bus *ixp23xx_pci_scan_bus(int, struct pci_sys_data*);
+void ixp23xx_pci_slave_init(void);
+
+extern struct sys_timer ixp23xx_timer;
+
+#define IXP23XX_UART_XTAL		14745600
+
+#ifndef __ASSEMBLY__
+/*
+ * Is system memory on the XSI or CPP bus?
+ */
+static inline unsigned ixp23xx_cpp_boot(void)
+{
+	return (*IXP23XX_EXP_CFG0 & IXP23XX_EXP_CFG0_XSI_NOT_PRES);
+}
+#endif
+
+
+#endif
diff --git a/arch/arm/mach-ixp23xx/include/mach/system.h b/arch/arm/mach-ixp23xx/include/mach/system.h
new file mode 100644
index 000000000000..d57c3fc10f1f
--- /dev/null
+++ b/arch/arm/mach-ixp23xx/include/mach/system.h
@@ -0,0 +1,33 @@
+/*
+ * arch/arm/mach-ixp23xx/include/mach/system.h
+ *
+ * Copyright (C) 2003 Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <mach/hardware.h>
+#include <asm/mach-types.h>
+
+static inline void arch_idle(void)
+{
+#if 0
+	if (!hlt_counter)
+		cpu_do_idle();
+#endif
+}
+
+static inline void arch_reset(char mode)
+{
+	/* First try machine specific support */
+	if (machine_is_ixdp2351()) {
+		*IXDP2351_CPLD_RESET1_REG = IXDP2351_CPLD_RESET1_MAGIC;
+		(void) *IXDP2351_CPLD_RESET1_REG;
+		*IXDP2351_CPLD_RESET1_REG = IXDP2351_CPLD_RESET1_ENABLE;
+	}
+
+	/* Use on-chip reset capability */
+	*IXP23XX_RESET0 |= IXP23XX_RST_ALL;
+}
diff --git a/arch/arm/mach-ixp23xx/include/mach/time.h b/arch/arm/mach-ixp23xx/include/mach/time.h
new file mode 100644
index 000000000000..b61dafc884ac
--- /dev/null
+++ b/arch/arm/mach-ixp23xx/include/mach/time.h
@@ -0,0 +1,3 @@
+/*
+ * arch/arm/mach-ixp23xx/include/mach/time.h
+ */
diff --git a/arch/arm/mach-ixp23xx/include/mach/timex.h b/arch/arm/mach-ixp23xx/include/mach/timex.h
new file mode 100644
index 000000000000..e341e9cf9c37
--- /dev/null
+++ b/arch/arm/mach-ixp23xx/include/mach/timex.h
@@ -0,0 +1,7 @@
+/*
+ * arch/arm/mach-ixp23xx/include/mach/timex.h
+ *
+ * XScale architecture timex specifications
+ */
+
+#define CLOCK_TICK_RATE 75000000
diff --git a/arch/arm/mach-ixp23xx/include/mach/uncompress.h b/arch/arm/mach-ixp23xx/include/mach/uncompress.h
new file mode 100644
index 000000000000..8b4c358d2c04
--- /dev/null
+++ b/arch/arm/mach-ixp23xx/include/mach/uncompress.h
@@ -0,0 +1,40 @@
+/*
+ * arch/arm/mach-ixp23xx/include/mach/uncompress.h
+ *
+ * Copyright (C) 2002-2004 Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_UNCOMPRESS_H
+#define __ASM_ARCH_UNCOMPRESS_H
+
+#include <mach/ixp23xx.h>
+#include <linux/serial_reg.h>
+
+#define UART_BASE	((volatile u32 *)IXP23XX_UART1_PHYS)
+
+static inline void putc(char c)
+{
+	int j;
+
+	for (j = 0; j < 0x1000; j++) {
+		if (UART_BASE[UART_LSR] & UART_LSR_THRE)
+			break;
+		barrier();
+	}
+
+	UART_BASE[UART_TX] = c;
+}
+
+static inline void flush(void)
+{
+}
+
+#define arch_decomp_setup()
+#define arch_decomp_wdog()
+
+
+#endif
diff --git a/arch/arm/mach-ixp23xx/include/mach/vmalloc.h b/arch/arm/mach-ixp23xx/include/mach/vmalloc.h
new file mode 100644
index 000000000000..dd519f678d10
--- /dev/null
+++ b/arch/arm/mach-ixp23xx/include/mach/vmalloc.h
@@ -0,0 +1,10 @@
+/*
+ * arch/arm/mach-ixp23xx/include/mach/vmalloc.h
+ *
+ * Copyright (c) 2005 MontaVista Software, Inc.
+ *
+ * NPU mappings end at 0xf0000000 and we allocate 64MB for board
+ * specific static I/O.
+ */
+
+#define VMALLOC_END	(0xec000000)
diff --git a/arch/arm/mach-ixp23xx/ixdp2351.c b/arch/arm/mach-ixp23xx/ixdp2351.c
index 5c5d4d66dee8..b6e0bfa44df9 100644
--- a/arch/arm/mach-ixp23xx/ixdp2351.c
+++ b/arch/arm/mach-ixp23xx/ixdp2351.c
@@ -34,7 +34,7 @@
 #include <asm/types.h>
 #include <asm/setup.h>
 #include <asm/memory.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/system.h>
 #include <asm/tlbflush.h>
diff --git a/arch/arm/mach-ixp23xx/pci.c b/arch/arm/mach-ixp23xx/pci.c
index 227f808dc0ec..701d60aa0efd 100644
--- a/arch/arm/mach-ixp23xx/pci.c
+++ b/arch/arm/mach-ixp23xx/pci.c
@@ -31,8 +31,7 @@
 #include <asm/sizes.h>
 #include <asm/system.h>
 #include <asm/mach/pci.h>
-#include <asm/mach-types.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 
 extern int (*external_fault) (unsigned long, struct pt_regs *);
 
diff --git a/arch/arm/mach-ixp23xx/roadrunner.c b/arch/arm/mach-ixp23xx/roadrunner.c
index f0f70ba1e46d..6d38d769761c 100644
--- a/arch/arm/mach-ixp23xx/roadrunner.c
+++ b/arch/arm/mach-ixp23xx/roadrunner.c
@@ -33,7 +33,7 @@
 #include <asm/types.h>
 #include <asm/setup.h>
 #include <asm/memory.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/irq.h>
 #include <asm/system.h>
@@ -110,8 +110,8 @@ static int __init roadrunner_map_irq(struct pci_dev *dev, u8 idsel, u8 pin)
 
 static void __init roadrunner_pci_preinit(void)
 {
-	set_irq_type(IRQ_ROADRUNNER_PCI_INTC, IRQT_LOW);
-	set_irq_type(IRQ_ROADRUNNER_PCI_INTD, IRQT_LOW);
+	set_irq_type(IRQ_ROADRUNNER_PCI_INTC, IRQ_TYPE_LEVEL_LOW);
+	set_irq_type(IRQ_ROADRUNNER_PCI_INTD, IRQ_TYPE_LEVEL_LOW);
 
 	ixp23xx_pci_preinit();
 }
diff --git a/arch/arm/mach-ixp4xx/avila-pci.c b/arch/arm/mach-ixp4xx/avila-pci.c
index 3f867691d9f2..08d65dcdb5fe 100644
--- a/arch/arm/mach-ixp4xx/avila-pci.c
+++ b/arch/arm/mach-ixp4xx/avila-pci.c
@@ -25,15 +25,15 @@
 
 #include <asm/mach/pci.h>
 #include <asm/irq.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/mach-types.h>
 
 void __init avila_pci_preinit(void)
 {
-	set_irq_type(IRQ_AVILA_PCI_INTA, IRQT_LOW);
-	set_irq_type(IRQ_AVILA_PCI_INTB, IRQT_LOW);
-	set_irq_type(IRQ_AVILA_PCI_INTC, IRQT_LOW);
-	set_irq_type(IRQ_AVILA_PCI_INTD, IRQT_LOW);
+	set_irq_type(IRQ_AVILA_PCI_INTA, IRQ_TYPE_LEVEL_LOW);
+	set_irq_type(IRQ_AVILA_PCI_INTB, IRQ_TYPE_LEVEL_LOW);
+	set_irq_type(IRQ_AVILA_PCI_INTC, IRQ_TYPE_LEVEL_LOW);
+	set_irq_type(IRQ_AVILA_PCI_INTD, IRQ_TYPE_LEVEL_LOW);
 
 	ixp4xx_pci_preinit();
 }
diff --git a/arch/arm/mach-ixp4xx/avila-setup.c b/arch/arm/mach-ixp4xx/avila-setup.c
index e38f45fa58ae..797995ce18b9 100644
--- a/arch/arm/mach-ixp4xx/avila-setup.c
+++ b/arch/arm/mach-ixp4xx/avila-setup.c
@@ -23,7 +23,7 @@
 #include <asm/types.h>
 #include <asm/setup.h>
 #include <asm/memory.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/irq.h>
 #include <asm/mach/arch.h>
diff --git a/arch/arm/mach-ixp4xx/common-pci.c b/arch/arm/mach-ixp4xx/common-pci.c
index 64be341109b3..192538a04575 100644
--- a/arch/arm/mach-ixp4xx/common-pci.c
+++ b/arch/arm/mach-ixp4xx/common-pci.c
@@ -32,7 +32,7 @@
 #include <asm/sizes.h>
 #include <asm/system.h>
 #include <asm/mach/pci.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 
 
 /*
diff --git a/arch/arm/mach-ixp4xx/common.c b/arch/arm/mach-ixp4xx/common.c
index 3781b3db9f49..58bd2842a6f1 100644
--- a/arch/arm/mach-ixp4xx/common.c
+++ b/arch/arm/mach-ixp4xx/common.c
@@ -29,8 +29,8 @@
 #include <linux/clocksource.h>
 #include <linux/clockchips.h>
 
-#include <asm/arch/udc.h>
-#include <asm/hardware.h>
+#include <mach/udc.h>
+#include <mach/hardware.h>
 #include <asm/uaccess.h>
 #include <asm/io.h>
 #include <asm/pgtable.h>
@@ -142,23 +142,23 @@ static int ixp4xx_set_irq_type(unsigned int irq, unsigned int type)
 		return -EINVAL;
 
 	switch (type){
-	case IRQT_BOTHEDGE:
+	case IRQ_TYPE_EDGE_BOTH:
 		int_style = IXP4XX_GPIO_STYLE_TRANSITIONAL;
 		irq_type = IXP4XX_IRQ_EDGE;
 		break;
-	case IRQT_RISING:
+	case IRQ_TYPE_EDGE_RISING:
 		int_style = IXP4XX_GPIO_STYLE_RISING_EDGE;
 		irq_type = IXP4XX_IRQ_EDGE;
 		break;
-	case IRQT_FALLING:
+	case IRQ_TYPE_EDGE_FALLING:
 		int_style = IXP4XX_GPIO_STYLE_FALLING_EDGE;
 		irq_type = IXP4XX_IRQ_EDGE;
 		break;
-	case IRQT_HIGH:
+	case IRQ_TYPE_LEVEL_HIGH:
 		int_style = IXP4XX_GPIO_STYLE_ACTIVE_HIGH;
 		irq_type = IXP4XX_IRQ_LEVEL;
 		break;
-	case IRQT_LOW:
+	case IRQ_TYPE_LEVEL_LOW:
 		int_style = IXP4XX_GPIO_STYLE_ACTIVE_LOW;
 		irq_type = IXP4XX_IRQ_LEVEL;
 		break;
diff --git a/arch/arm/mach-ixp4xx/coyote-pci.c b/arch/arm/mach-ixp4xx/coyote-pci.c
index ad2e5b97966e..efddf01ed17b 100644
--- a/arch/arm/mach-ixp4xx/coyote-pci.c
+++ b/arch/arm/mach-ixp4xx/coyote-pci.c
@@ -20,15 +20,15 @@
 #include <linux/irq.h>
 
 #include <asm/mach-types.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/irq.h>
 
 #include <asm/mach/pci.h>
 
 void __init coyote_pci_preinit(void)
 {
-	set_irq_type(IRQ_COYOTE_PCI_SLOT0, IRQT_LOW);
-	set_irq_type(IRQ_COYOTE_PCI_SLOT1, IRQT_LOW);
+	set_irq_type(IRQ_COYOTE_PCI_SLOT0, IRQ_TYPE_LEVEL_LOW);
+	set_irq_type(IRQ_COYOTE_PCI_SLOT1, IRQ_TYPE_LEVEL_LOW);
 
 	ixp4xx_pci_preinit();
 }
diff --git a/arch/arm/mach-ixp4xx/coyote-setup.c b/arch/arm/mach-ixp4xx/coyote-setup.c
index 13f8a7ac3ba9..aab1954e2747 100644
--- a/arch/arm/mach-ixp4xx/coyote-setup.c
+++ b/arch/arm/mach-ixp4xx/coyote-setup.c
@@ -19,7 +19,7 @@
 #include <asm/types.h>
 #include <asm/setup.h>
 #include <asm/memory.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/irq.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
diff --git a/arch/arm/mach-ixp4xx/dsmg600-pci.c b/arch/arm/mach-ixp4xx/dsmg600-pci.c
index 9db7e1f42011..926d15f885fb 100644
--- a/arch/arm/mach-ixp4xx/dsmg600-pci.c
+++ b/arch/arm/mach-ixp4xx/dsmg600-pci.c
@@ -25,12 +25,12 @@
 
 void __init dsmg600_pci_preinit(void)
 {
-	set_irq_type(IRQ_DSMG600_PCI_INTA, IRQT_LOW);
-	set_irq_type(IRQ_DSMG600_PCI_INTB, IRQT_LOW);
-	set_irq_type(IRQ_DSMG600_PCI_INTC, IRQT_LOW);
-	set_irq_type(IRQ_DSMG600_PCI_INTD, IRQT_LOW);
-	set_irq_type(IRQ_DSMG600_PCI_INTE, IRQT_LOW);
-	set_irq_type(IRQ_DSMG600_PCI_INTF, IRQT_LOW);
+	set_irq_type(IRQ_DSMG600_PCI_INTA, IRQ_TYPE_LEVEL_LOW);
+	set_irq_type(IRQ_DSMG600_PCI_INTB, IRQ_TYPE_LEVEL_LOW);
+	set_irq_type(IRQ_DSMG600_PCI_INTC, IRQ_TYPE_LEVEL_LOW);
+	set_irq_type(IRQ_DSMG600_PCI_INTD, IRQ_TYPE_LEVEL_LOW);
+	set_irq_type(IRQ_DSMG600_PCI_INTE, IRQ_TYPE_LEVEL_LOW);
+	set_irq_type(IRQ_DSMG600_PCI_INTF, IRQ_TYPE_LEVEL_LOW);
 
 	ixp4xx_pci_preinit();
 }
diff --git a/arch/arm/mach-ixp4xx/fsg-pci.c b/arch/arm/mach-ixp4xx/fsg-pci.c
index f19f3f6feda1..ca12a9ca0830 100644
--- a/arch/arm/mach-ixp4xx/fsg-pci.c
+++ b/arch/arm/mach-ixp4xx/fsg-pci.c
@@ -25,9 +25,9 @@
 
 void __init fsg_pci_preinit(void)
 {
-	set_irq_type(IRQ_FSG_PCI_INTA, IRQT_LOW);
-	set_irq_type(IRQ_FSG_PCI_INTB, IRQT_LOW);
-	set_irq_type(IRQ_FSG_PCI_INTC, IRQT_LOW);
+	set_irq_type(IRQ_FSG_PCI_INTA, IRQ_TYPE_LEVEL_LOW);
+	set_irq_type(IRQ_FSG_PCI_INTB, IRQ_TYPE_LEVEL_LOW);
+	set_irq_type(IRQ_FSG_PCI_INTC, IRQ_TYPE_LEVEL_LOW);
 
 	ixp4xx_pci_preinit();
 }
diff --git a/arch/arm/mach-ixp4xx/fsg-setup.c b/arch/arm/mach-ixp4xx/fsg-setup.c
index 0db3a909ae61..501dfdcc39fe 100644
--- a/arch/arm/mach-ixp4xx/fsg-setup.c
+++ b/arch/arm/mach-ixp4xx/fsg-setup.c
@@ -64,7 +64,7 @@ static struct platform_device fsg_i2c_gpio = {
 
 static struct i2c_board_info __initdata fsg_i2c_board_info [] = {
 	{
-		I2C_BOARD_INFO("rtc-isl1208", 0x6f),
+		I2C_BOARD_INFO("isl1208", 0x6f),
 	},
 };
 
@@ -179,7 +179,6 @@ static void __init fsg_init(void)
 {
 	DECLARE_MAC_BUF(mac_buf);
 	uint8_t __iomem *f;
-	int i;
 
 	ixp4xx_sys_init();
 
@@ -228,6 +227,7 @@ static void __init fsg_init(void)
 	f = ioremap(IXP4XX_EXP_BUS_BASE(0), 0x400000);
 	if (f) {
 #ifdef __ARMEB__
+		int i;
 		for (i = 0; i < 6; i++) {
 			fsg_plat_eth[0].hwaddr[i] = readb(f + 0x3C0422 + i);
 			fsg_plat_eth[1].hwaddr[i] = readb(f + 0x3C043B + i);
diff --git a/arch/arm/mach-ixp4xx/gateway7001-pci.c b/arch/arm/mach-ixp4xx/gateway7001-pci.c
index 6abf568322d3..7e93a0975c4d 100644
--- a/arch/arm/mach-ixp4xx/gateway7001-pci.c
+++ b/arch/arm/mach-ixp4xx/gateway7001-pci.c
@@ -23,14 +23,14 @@
 #include <linux/irq.h>
 
 #include <asm/mach-types.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 
 #include <asm/mach/pci.h>
 
 void __init gateway7001_pci_preinit(void)
 {
-	set_irq_type(IRQ_IXP4XX_GPIO10, IRQT_LOW);
-	set_irq_type(IRQ_IXP4XX_GPIO11, IRQT_LOW);
+	set_irq_type(IRQ_IXP4XX_GPIO10, IRQ_TYPE_LEVEL_LOW);
+	set_irq_type(IRQ_IXP4XX_GPIO11, IRQ_TYPE_LEVEL_LOW);
 
 	ixp4xx_pci_preinit();
 }
diff --git a/arch/arm/mach-ixp4xx/gateway7001-setup.c b/arch/arm/mach-ixp4xx/gateway7001-setup.c
index 37876832e141..59b73a0ddfa9 100644
--- a/arch/arm/mach-ixp4xx/gateway7001-setup.c
+++ b/arch/arm/mach-ixp4xx/gateway7001-setup.c
@@ -22,7 +22,7 @@
 #include <asm/types.h>
 #include <asm/setup.h>
 #include <asm/memory.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/irq.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
diff --git a/arch/arm/mach-ixp4xx/gtwx5715-pci.c b/arch/arm/mach-ixp4xx/gtwx5715-pci.c
index 49dec7868807..7b8a2c323840 100644
--- a/arch/arm/mach-ixp4xx/gtwx5715-pci.c
+++ b/arch/arm/mach-ixp4xx/gtwx5715-pci.c
@@ -28,8 +28,8 @@
 #include <linux/irq.h>
 
 #include <asm/mach-types.h>
-#include <asm/hardware.h>
-#include <asm/arch/gtwx5715.h>
+#include <mach/hardware.h>
+#include <mach/gtwx5715.h>
 #include <asm/mach/pci.h>
 
 /*
@@ -41,10 +41,10 @@
  */
 void __init gtwx5715_pci_preinit(void)
 {
-	set_irq_type(GTWX5715_PCI_SLOT0_INTA_IRQ, IRQT_LOW);
-	set_irq_type(GTWX5715_PCI_SLOT0_INTB_IRQ, IRQT_LOW);
-	set_irq_type(GTWX5715_PCI_SLOT1_INTA_IRQ, IRQT_LOW);
-	set_irq_type(GTWX5715_PCI_SLOT1_INTB_IRQ, IRQT_LOW);
+	set_irq_type(GTWX5715_PCI_SLOT0_INTA_IRQ, IRQ_TYPE_LEVEL_LOW);
+	set_irq_type(GTWX5715_PCI_SLOT0_INTB_IRQ, IRQ_TYPE_LEVEL_LOW);
+	set_irq_type(GTWX5715_PCI_SLOT1_INTA_IRQ, IRQ_TYPE_LEVEL_LOW);
+	set_irq_type(GTWX5715_PCI_SLOT1_INTB_IRQ, IRQ_TYPE_LEVEL_LOW);
 
 	ixp4xx_pci_preinit();
 }
diff --git a/arch/arm/mach-ixp4xx/gtwx5715-setup.c b/arch/arm/mach-ixp4xx/gtwx5715-setup.c
index dc6725bda3c4..25c21d6665ec 100644
--- a/arch/arm/mach-ixp4xx/gtwx5715-setup.c
+++ b/arch/arm/mach-ixp4xx/gtwx5715-setup.c
@@ -32,12 +32,12 @@
 #include <asm/types.h>
 #include <asm/setup.h>
 #include <asm/memory.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/irq.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/flash.h>
-#include <asm/arch/gtwx5715.h>
+#include <mach/gtwx5715.h>
 
 /*
  * Xscale UART registers are 32 bits wide with only the least
diff --git a/include/asm-arm/arch-ixp4xx/avila.h b/arch/arm/mach-ixp4xx/include/mach/avila.h
index 0dfea0ccd6ba..1640cb61972b 100644
--- a/include/asm-arm/arch-ixp4xx/avila.h
+++ b/arch/arm/mach-ixp4xx/include/mach/avila.h
@@ -1,5 +1,5 @@
 /*
- * include/asm-arm/arch-ixp4xx/avila.h
+ * arch/arm/mach-ixp4xx/include/mach/avila.h
  *
  * Gateworks Avila platform specific definitions
  *
@@ -16,7 +16,7 @@
  */
 
 #ifndef __ASM_ARCH_HARDWARE_H__
-#error "Do not include this directly, instead #include <asm/hardware.h>"
+#error "Do not include this directly, instead #include <mach/hardware.h>"
 #endif
 
 #define	AVILA_SDA_PIN		7
diff --git a/include/asm-arm/arch-ixp4xx/coyote.h b/arch/arm/mach-ixp4xx/include/mach/coyote.h
index 7ac9ba2c035c..717ac6d16f55 100644
--- a/include/asm-arm/arch-ixp4xx/coyote.h
+++ b/arch/arm/mach-ixp4xx/include/mach/coyote.h
@@ -1,5 +1,5 @@
 /*
- * include/asm-arm/arch-ixp4xx/coyote.h
+ * arch/arm/mach-ixp4xx/include/mach/coyote.h
  *
  * ADI Engineering platform specific definitions
  *
@@ -13,7 +13,7 @@
  */
 
 #ifndef __ASM_ARCH_HARDWARE_H__
-#error "Do not include this directly, instead #include <asm/hardware.h>"
+#error "Do not include this directly, instead #include <mach/hardware.h>"
 #endif
 
 /* PCI controller GPIO to IRQ pin mappings */
diff --git a/arch/arm/mach-ixp4xx/include/mach/cpu.h b/arch/arm/mach-ixp4xx/include/mach/cpu.h
new file mode 100644
index 000000000000..ff8aa2393bf9
--- /dev/null
+++ b/arch/arm/mach-ixp4xx/include/mach/cpu.h
@@ -0,0 +1,46 @@
+/*
+ * arch/arm/mach-ixp4xx/include/mach/cpu.h
+ *
+ * IXP4XX cpu type detection
+ *
+ * Copyright (C) 2007 MontaVista Software, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#ifndef __ASM_ARCH_CPU_H__
+#define __ASM_ARCH_CPU_H__
+
+extern unsigned int processor_id;
+/* Processor id value in CP15 Register 0 */
+#define IXP425_PROCESSOR_ID_VALUE	0x690541c0
+#define IXP435_PROCESSOR_ID_VALUE	0x69054040
+#define IXP465_PROCESSOR_ID_VALUE	0x69054200
+#define IXP4XX_PROCESSOR_ID_MASK	0xfffffff0
+
+#define cpu_is_ixp42x()	((processor_id & IXP4XX_PROCESSOR_ID_MASK) == \
+			  IXP425_PROCESSOR_ID_VALUE)
+#define cpu_is_ixp43x()	((processor_id & IXP4XX_PROCESSOR_ID_MASK) == \
+			  IXP435_PROCESSOR_ID_VALUE)
+#define cpu_is_ixp46x()	((processor_id & IXP4XX_PROCESSOR_ID_MASK) == \
+			  IXP465_PROCESSOR_ID_VALUE)
+
+static inline u32 ixp4xx_read_feature_bits(void)
+{
+	unsigned int val = ~*IXP4XX_EXP_CFG2;
+	val &= ~IXP4XX_FEATURE_RESERVED;
+	if (!cpu_is_ixp46x())
+		val &= ~IXP4XX_FEATURE_IXP46X_ONLY;
+
+	return val;
+}
+
+static inline void ixp4xx_write_feature_bits(u32 value)
+{
+	*IXP4XX_EXP_CFG2 = ~value;
+}
+
+#endif  /* _ASM_ARCH_CPU_H */
diff --git a/arch/arm/mach-ixp4xx/include/mach/debug-macro.S b/arch/arm/mach-ixp4xx/include/mach/debug-macro.S
new file mode 100644
index 000000000000..7c6a6912acde
--- /dev/null
+++ b/arch/arm/mach-ixp4xx/include/mach/debug-macro.S
@@ -0,0 +1,24 @@
+/* arch/arm/mach-ixp4xx/include/mach/debug-macro.S
+ *
+ * Debugging macro include header
+ *
+ *  Copyright (C) 1994-1999 Russell King
+ *  Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+                .macro  addruart,rx
+                mrc     p15, 0, \rx, c1, c0
+                tst     \rx, #1                 @ MMU enabled?
+                moveq   \rx, #0xc8000000
+                movne   \rx, #0xff000000
+		orrne	\rx, \rx, #0x00b00000
+                add     \rx,\rx,#3              @ Uart regs are at off set of 3 if
+						@ byte writes used - Big Endian.
+                .endm
+
+#define UART_SHIFT	2
+#include <asm/hardware/debug-8250.S>
diff --git a/arch/arm/mach-ixp4xx/include/mach/dma.h b/arch/arm/mach-ixp4xx/include/mach/dma.h
new file mode 100644
index 000000000000..00c5070c0201
--- /dev/null
+++ b/arch/arm/mach-ixp4xx/include/mach/dma.h
@@ -0,0 +1,21 @@
+/*
+ * arch/arm/mach-ixp4xx/include/mach/dma.h
+ *
+ * Copyright (C) 2001-2004 MontaVista Software, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+#ifndef __ASM_ARCH_DMA_H
+#define __ASM_ARCH_DMA_H
+
+#include <linux/device.h>
+#include <asm/page.h>
+#include <asm/sizes.h>
+#include <mach/hardware.h>
+
+#define MAX_DMA_ADDRESS		(PAGE_OFFSET + SZ_64M)
+
+#endif /* _ASM_ARCH_DMA_H */
diff --git a/include/asm-arm/arch-ixp4xx/dsmg600.h b/arch/arm/mach-ixp4xx/include/mach/dsmg600.h
index b7673e171abe..dc087a34a268 100644
--- a/include/asm-arm/arch-ixp4xx/dsmg600.h
+++ b/arch/arm/mach-ixp4xx/include/mach/dsmg600.h
@@ -13,7 +13,7 @@
  */
 
 #ifndef __ASM_ARCH_HARDWARE_H__
-#error "Do not include this directly, instead #include <asm/hardware.h>"
+#error "Do not include this directly, instead #include <mach/hardware.h>"
 #endif
 
 #define DSMG600_SDA_PIN		5
diff --git a/arch/arm/mach-ixp4xx/include/mach/entry-macro.S b/arch/arm/mach-ixp4xx/include/mach/entry-macro.S
new file mode 100644
index 000000000000..f2e14e94ed15
--- /dev/null
+++ b/arch/arm/mach-ixp4xx/include/mach/entry-macro.S
@@ -0,0 +1,47 @@
+/*
+ * arch/arm/mach-ixp4xx/include/mach/entry-macro.S
+ *
+ * Low-level IRQ helper macros for IXP4xx-based platforms
+ *
+ * This file is licensed under  the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+#include <mach/hardware.h>
+
+		.macro	disable_fiq
+		.endm
+
+		.macro  get_irqnr_preamble, base, tmp
+		.endm
+
+		.macro  arch_ret_to_user, tmp1, tmp2
+		.endm
+
+		.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
+		ldr	\irqstat, =(IXP4XX_INTC_BASE_VIRT+IXP4XX_ICIP_OFFSET)
+		ldr	\irqstat, [\irqstat]		@ get interrupts
+		cmp	\irqstat, #0
+		beq	1001f				@ upper IRQ?
+		clz     \irqnr, \irqstat
+		mov     \base, #31
+		sub     \irqnr, \base, \irqnr
+		b	1002f				@ lower IRQ being
+							@ handled
+
+1001:
+		/*
+		 * IXP465/IXP435 has an upper IRQ status register
+		 */
+#if defined(CONFIG_CPU_IXP46X) || defined(CONFIG_CPU_IXP43X)
+		ldr	\irqstat, =(IXP4XX_INTC_BASE_VIRT+IXP4XX_ICIP2_OFFSET)
+		ldr	\irqstat, [\irqstat]		@ get upper interrupts
+		mov	\irqnr, #63
+		clz	\irqstat, \irqstat
+ 		cmp	\irqstat, #32
+		subne	\irqnr, \irqnr, \irqstat
+#endif
+1002:
+		.endm
+
+
diff --git a/include/asm-arm/arch-ixp4xx/fsg.h b/arch/arm/mach-ixp4xx/include/mach/fsg.h
index c0100cc7981c..1f02b7e22a13 100644
--- a/include/asm-arm/arch-ixp4xx/fsg.h
+++ b/arch/arm/mach-ixp4xx/include/mach/fsg.h
@@ -1,5 +1,5 @@
 /*
- * include/asm-arm/arch-ixp4xx/fsg.h
+ * arch/arm/mach-ixp4xx/include/mach/fsg.h
  *
  * Freecom FSG-3 platform specific definitions
  *
@@ -16,7 +16,7 @@
  */
 
 #ifndef __ASM_ARCH_HARDWARE_H__
-#error "Do not include this directly, instead #include <asm/hardware.h>"
+#error "Do not include this directly, instead #include <mach/hardware.h>"
 #endif
 
 #define FSG_SDA_PIN		12
diff --git a/arch/arm/mach-ixp4xx/include/mach/gpio.h b/arch/arm/mach-ixp4xx/include/mach/gpio.h
new file mode 100644
index 000000000000..9fbde177920f
--- /dev/null
+++ b/arch/arm/mach-ixp4xx/include/mach/gpio.h
@@ -0,0 +1,73 @@
+/*
+ * arch/arm/mach-ixp4xx/include/mach/gpio.h
+ *
+ * IXP4XX GPIO wrappers for arch-neutral GPIO calls
+ *
+ * Written by Milan Svoboda <msvoboda@ra.rockwell.com>
+ * Based on PXA implementation by Philipp Zabel <philipp.zabel@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ */
+
+#ifndef __ASM_ARCH_IXP4XX_GPIO_H
+#define __ASM_ARCH_IXP4XX_GPIO_H
+
+#include <mach/hardware.h>
+
+static inline int gpio_request(unsigned gpio, const char *label)
+{
+	return 0;
+}
+
+static inline void gpio_free(unsigned gpio)
+{
+	return;
+}
+
+static inline int gpio_direction_input(unsigned gpio)
+{
+	gpio_line_config(gpio, IXP4XX_GPIO_IN);
+	return 0;
+}
+
+static inline int gpio_direction_output(unsigned gpio, int level)
+{
+	gpio_line_set(gpio, level);
+	gpio_line_config(gpio, IXP4XX_GPIO_OUT);
+	return 0;
+}
+
+static inline int gpio_get_value(unsigned gpio)
+{
+	int value;
+
+	gpio_line_get(gpio, &value);
+
+	return value;
+}
+
+static inline void gpio_set_value(unsigned gpio, int value)
+{
+	gpio_line_set(gpio, value);
+}
+
+#include <asm-generic/gpio.h>			/* cansleep wrappers */
+
+extern int gpio_to_irq(int gpio);
+extern int irq_to_gpio(int gpio);
+
+#endif
+
diff --git a/include/asm-arm/arch-ixp4xx/gtwx5715.h b/arch/arm/mach-ixp4xx/include/mach/gtwx5715.h
index c3069d67c00e..5d5e201cac7e 100644
--- a/include/asm-arm/arch-ixp4xx/gtwx5715.h
+++ b/arch/arm/mach-ixp4xx/include/mach/gtwx5715.h
@@ -1,5 +1,5 @@
 /*
- * include/asm-arm/arch-ixp4xx/gtwx5715.h
+ * arch/arm/mach-ixp4xx/include/mach/gtwx5715.h
  *
  * Gemtek GTWX5715 Gateway (Linksys WRV54G)
  *
@@ -21,7 +21,7 @@
  */
 
 #ifndef __ASM_ARCH_HARDWARE_H__
-#error "Do not include this directly, instead #include <asm/hardware.h>"
+#error "Do not include this directly, instead #include <mach/hardware.h>"
 #endif
 #include "irqs.h"
 
diff --git a/arch/arm/mach-ixp4xx/include/mach/hardware.h b/arch/arm/mach-ixp4xx/include/mach/hardware.h
new file mode 100644
index 000000000000..f58a43a23966
--- /dev/null
+++ b/arch/arm/mach-ixp4xx/include/mach/hardware.h
@@ -0,0 +1,50 @@
+/*
+ * arch/arm/mach-ixp4xx/include/mach/hardware.h 
+ *
+ * Copyright (C) 2002 Intel Corporation.
+ * Copyright (C) 2003-2004 MontaVista Software, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+/*
+ * Hardware definitions for IXP4xx based systems
+ */
+
+#ifndef __ASM_ARCH_HARDWARE_H__
+#define __ASM_ARCH_HARDWARE_H__
+
+#define PCIBIOS_MIN_IO		0x00001000
+#define PCIBIOS_MIN_MEM		(cpu_is_ixp43x() ? 0x40000000 : 0x48000000)
+
+/*
+ * We override the standard dma-mask routines for bouncing.
+ */
+#define	HAVE_ARCH_PCI_SET_DMA_MASK
+
+#define pcibios_assign_all_busses()	1
+
+/* Register locations and bits */
+#include "ixp4xx-regs.h"
+
+#ifndef __ASSEMBLER__
+#include <mach/cpu.h>
+#endif
+
+/* Platform helper functions and definitions */
+#include "platform.h"
+
+/* Platform specific details */
+#include "ixdp425.h"
+#include "avila.h"
+#include "coyote.h"
+#include "prpmc1100.h"
+#include "nslu2.h"
+#include "nas100d.h"
+#include "dsmg600.h"
+#include "fsg.h"
+
+#endif  /* _ASM_ARCH_HARDWARE_H */
diff --git a/arch/arm/mach-ixp4xx/include/mach/io.h b/arch/arm/mach-ixp4xx/include/mach/io.h
new file mode 100644
index 000000000000..319948e31bec
--- /dev/null
+++ b/arch/arm/mach-ixp4xx/include/mach/io.h
@@ -0,0 +1,569 @@
+/*
+ * arch/arm/mach-ixp4xx/include/mach/io.h
+ *
+ * Author: Deepak Saxena <dsaxena@plexity.net>
+ *
+ * Copyright (C) 2002-2005  MontaVista Software, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARM_ARCH_IO_H
+#define __ASM_ARM_ARCH_IO_H
+
+#include <linux/bitops.h>
+
+#include <mach/hardware.h>
+
+#define IO_SPACE_LIMIT 0xffff0000
+
+extern int (*ixp4xx_pci_read)(u32 addr, u32 cmd, u32* data);
+extern int ixp4xx_pci_write(u32 addr, u32 cmd, u32 data);
+
+
+/*
+ * IXP4xx provides two methods of accessing PCI memory space:
+ *
+ * 1) A direct mapped window from 0x48000000 to 0x4bffffff (64MB).
+ *    To access PCI via this space, we simply ioremap() the BAR
+ *    into the kernel and we can use the standard read[bwl]/write[bwl]
+ *    macros. This is the preffered method due to speed but it
+ *    limits the system to just 64MB of PCI memory. This can be 
+ *    problamatic if using video cards and other memory-heavy
+ *    targets.
+ *
+ * 2) If > 64MB of memory space is required, the IXP4xx can be configured
+ *    to use indirect registers to access PCI (as we do below for I/O
+ *    transactions). This allows for up to 128MB (0x48000000 to 0x4fffffff)
+ *    of memory on the bus. The disadvantage of this is that every 
+ *    PCI access requires three local register accesses plus a spinlock,
+ *    but in some cases the performance hit is acceptable. In addition,
+ *    you cannot mmap() PCI devices in this case.
+ *
+ */
+#ifndef	CONFIG_IXP4XX_INDIRECT_PCI
+
+#define __mem_pci(a)		(a)
+
+#else
+
+#include <linux/mm.h>
+
+/*
+ * In the case of using indirect PCI, we simply return the actual PCI
+ * address and our read/write implementation use that to drive the 
+ * access registers. If something outside of PCI is ioremap'd, we
+ * fallback to the default.
+ */
+static inline void __iomem *
+__ixp4xx_ioremap(unsigned long addr, size_t size, unsigned int mtype)
+{
+	if((addr < PCIBIOS_MIN_MEM) || (addr > 0x4fffffff))
+		return __arm_ioremap(addr, size, mtype);
+
+	return (void __iomem *)addr;
+}
+
+static inline void
+__ixp4xx_iounmap(void __iomem *addr)
+{
+	if ((__force u32)addr >= VMALLOC_START)
+		__iounmap(addr);
+}
+
+#define __arch_ioremap(a, s, f)		__ixp4xx_ioremap(a, s, f)
+#define	__arch_iounmap(a)		__ixp4xx_iounmap(a)
+
+#define	writeb(v, p)			__ixp4xx_writeb(v, p)
+#define	writew(v, p)			__ixp4xx_writew(v, p)
+#define	writel(v, p)			__ixp4xx_writel(v, p)
+
+#define	writesb(p, v, l)		__ixp4xx_writesb(p, v, l)
+#define	writesw(p, v, l)		__ixp4xx_writesw(p, v, l)
+#define	writesl(p, v, l)		__ixp4xx_writesl(p, v, l)
+	
+#define	readb(p)			__ixp4xx_readb(p)
+#define	readw(p)			__ixp4xx_readw(p)
+#define	readl(p)			__ixp4xx_readl(p)
+	
+#define	readsb(p, v, l)			__ixp4xx_readsb(p, v, l)
+#define	readsw(p, v, l)			__ixp4xx_readsw(p, v, l)
+#define	readsl(p, v, l)			__ixp4xx_readsl(p, v, l)
+
+static inline void 
+__ixp4xx_writeb(u8 value, volatile void __iomem *p)
+{
+	u32 addr = (u32)p;
+	u32 n, byte_enables, data;
+
+	if (addr >= VMALLOC_START) {
+		__raw_writeb(value, addr);
+		return;
+	}
+
+	n = addr % 4;
+	byte_enables = (0xf & ~BIT(n)) << IXP4XX_PCI_NP_CBE_BESL;
+	data = value << (8*n);
+	ixp4xx_pci_write(addr, byte_enables | NP_CMD_MEMWRITE, data);
+}
+
+static inline void
+__ixp4xx_writesb(volatile void __iomem *bus_addr, const u8 *vaddr, int count)
+{
+	while (count--)
+		writeb(*vaddr++, bus_addr);
+}
+
+static inline void 
+__ixp4xx_writew(u16 value, volatile void __iomem *p)
+{
+	u32 addr = (u32)p;
+	u32 n, byte_enables, data;
+
+	if (addr >= VMALLOC_START) {
+		__raw_writew(value, addr);
+		return;
+	}
+
+	n = addr % 4;
+	byte_enables = (0xf & ~(BIT(n) | BIT(n+1))) << IXP4XX_PCI_NP_CBE_BESL;
+	data = value << (8*n);
+	ixp4xx_pci_write(addr, byte_enables | NP_CMD_MEMWRITE, data);
+}
+
+static inline void
+__ixp4xx_writesw(volatile void __iomem *bus_addr, const u16 *vaddr, int count)
+{
+	while (count--)
+		writew(*vaddr++, bus_addr);
+}
+
+static inline void 
+__ixp4xx_writel(u32 value, volatile void __iomem *p)
+{
+	u32 addr = (__force u32)p;
+	if (addr >= VMALLOC_START) {
+		__raw_writel(value, p);
+		return;
+	}
+
+	ixp4xx_pci_write(addr, NP_CMD_MEMWRITE, value);
+}
+
+static inline void
+__ixp4xx_writesl(volatile void __iomem *bus_addr, const u32 *vaddr, int count)
+{
+	while (count--)
+		writel(*vaddr++, bus_addr);
+}
+
+static inline unsigned char 
+__ixp4xx_readb(const volatile void __iomem *p)
+{
+	u32 addr = (u32)p;
+	u32 n, byte_enables, data;
+
+	if (addr >= VMALLOC_START)
+		return __raw_readb(addr);
+
+	n = addr % 4;
+	byte_enables = (0xf & ~BIT(n)) << IXP4XX_PCI_NP_CBE_BESL;
+	if (ixp4xx_pci_read(addr, byte_enables | NP_CMD_MEMREAD, &data))
+		return 0xff;
+
+	return data >> (8*n);
+}
+
+static inline void
+__ixp4xx_readsb(const volatile void __iomem *bus_addr, u8 *vaddr, u32 count)
+{
+	while (count--)
+		*vaddr++ = readb(bus_addr);
+}
+
+static inline unsigned short 
+__ixp4xx_readw(const volatile void __iomem *p)
+{
+	u32 addr = (u32)p;
+	u32 n, byte_enables, data;
+
+	if (addr >= VMALLOC_START)
+		return __raw_readw(addr);
+
+	n = addr % 4;
+	byte_enables = (0xf & ~(BIT(n) | BIT(n+1))) << IXP4XX_PCI_NP_CBE_BESL;
+	if (ixp4xx_pci_read(addr, byte_enables | NP_CMD_MEMREAD, &data))
+		return 0xffff;
+
+	return data>>(8*n);
+}
+
+static inline void 
+__ixp4xx_readsw(const volatile void __iomem *bus_addr, u16 *vaddr, u32 count)
+{
+	while (count--)
+		*vaddr++ = readw(bus_addr);
+}
+
+static inline unsigned long 
+__ixp4xx_readl(const volatile void __iomem *p)
+{
+	u32 addr = (__force u32)p;
+	u32 data;
+
+	if (addr >= VMALLOC_START)
+		return __raw_readl(p);
+
+	if (ixp4xx_pci_read(addr, NP_CMD_MEMREAD, &data))
+		return 0xffffffff;
+
+	return data;
+}
+
+static inline void 
+__ixp4xx_readsl(const volatile void __iomem *bus_addr, u32 *vaddr, u32 count)
+{
+	while (count--)
+		*vaddr++ = readl(bus_addr);
+}
+
+
+/*
+ * We can use the built-in functions b/c they end up calling writeb/readb
+ */
+#define memset_io(c,v,l)		_memset_io((c),(v),(l))
+#define memcpy_fromio(a,c,l)		_memcpy_fromio((a),(c),(l))
+#define memcpy_toio(c,a,l)		_memcpy_toio((c),(a),(l))
+
+#endif
+
+#ifndef CONFIG_PCI
+
+#define	__io(v)		v
+
+#else
+
+/*
+ * IXP4xx does not have a transparent cpu -> PCI I/O translation
+ * window.  Instead, it has a set of registers that must be tweaked
+ * with the proper byte lanes, command types, and address for the
+ * transaction.  This means that we need to override the default
+ * I/O functions.
+ */
+#define	outb(p, v)			__ixp4xx_outb(p, v)
+#define	outw(p, v)			__ixp4xx_outw(p, v)
+#define	outl(p, v)			__ixp4xx_outl(p, v)
+	
+#define	outsb(p, v, l)			__ixp4xx_outsb(p, v, l)
+#define	outsw(p, v, l)			__ixp4xx_outsw(p, v, l)
+#define	outsl(p, v, l)			__ixp4xx_outsl(p, v, l)
+
+#define	inb(p)				__ixp4xx_inb(p)
+#define	inw(p)				__ixp4xx_inw(p)
+#define	inl(p)				__ixp4xx_inl(p)
+
+#define	insb(p, v, l)			__ixp4xx_insb(p, v, l)
+#define	insw(p, v, l)			__ixp4xx_insw(p, v, l)
+#define	insl(p, v, l)			__ixp4xx_insl(p, v, l)
+
+
+static inline void 
+__ixp4xx_outb(u8 value, u32 addr)
+{
+	u32 n, byte_enables, data;
+	n = addr % 4;
+	byte_enables = (0xf & ~BIT(n)) << IXP4XX_PCI_NP_CBE_BESL;
+	data = value << (8*n);
+	ixp4xx_pci_write(addr, byte_enables | NP_CMD_IOWRITE, data);
+}
+
+static inline void 
+__ixp4xx_outsb(u32 io_addr, const u8 *vaddr, u32 count)
+{
+	while (count--)
+		outb(*vaddr++, io_addr);
+}
+
+static inline void 
+__ixp4xx_outw(u16 value, u32 addr)
+{
+	u32 n, byte_enables, data;
+	n = addr % 4;
+	byte_enables = (0xf & ~(BIT(n) | BIT(n+1))) << IXP4XX_PCI_NP_CBE_BESL;
+	data = value << (8*n);
+	ixp4xx_pci_write(addr, byte_enables | NP_CMD_IOWRITE, data);
+}
+
+static inline void 
+__ixp4xx_outsw(u32 io_addr, const u16 *vaddr, u32 count)
+{
+	while (count--)
+		outw(cpu_to_le16(*vaddr++), io_addr);
+}
+
+static inline void 
+__ixp4xx_outl(u32 value, u32 addr)
+{
+	ixp4xx_pci_write(addr, NP_CMD_IOWRITE, value);
+}
+
+static inline void 
+__ixp4xx_outsl(u32 io_addr, const u32 *vaddr, u32 count)
+{
+	while (count--)
+		outl(*vaddr++, io_addr);
+}
+
+static inline u8 
+__ixp4xx_inb(u32 addr)
+{
+	u32 n, byte_enables, data;
+	n = addr % 4;
+	byte_enables = (0xf & ~BIT(n)) << IXP4XX_PCI_NP_CBE_BESL;
+	if (ixp4xx_pci_read(addr, byte_enables | NP_CMD_IOREAD, &data))
+		return 0xff;
+
+	return data >> (8*n);
+}
+
+static inline void 
+__ixp4xx_insb(u32 io_addr, u8 *vaddr, u32 count)
+{
+	while (count--)
+		*vaddr++ = inb(io_addr);
+}
+
+static inline u16 
+__ixp4xx_inw(u32 addr)
+{
+	u32 n, byte_enables, data;
+	n = addr % 4;
+	byte_enables = (0xf & ~(BIT(n) | BIT(n+1))) << IXP4XX_PCI_NP_CBE_BESL;
+	if (ixp4xx_pci_read(addr, byte_enables | NP_CMD_IOREAD, &data))
+		return 0xffff;
+
+	return data>>(8*n);
+}
+
+static inline void 
+__ixp4xx_insw(u32 io_addr, u16 *vaddr, u32 count)
+{
+	while (count--)
+		*vaddr++ = le16_to_cpu(inw(io_addr));
+}
+
+static inline u32 
+__ixp4xx_inl(u32 addr)
+{
+	u32 data;
+	if (ixp4xx_pci_read(addr, NP_CMD_IOREAD, &data))
+		return 0xffffffff;
+
+	return data;
+}
+
+static inline void 
+__ixp4xx_insl(u32 io_addr, u32 *vaddr, u32 count)
+{
+	while (count--)
+		*vaddr++ = inl(io_addr);
+}
+
+#define PIO_OFFSET      0x10000UL
+#define PIO_MASK        0x0ffffUL
+
+#define	__is_io_address(p)	(((unsigned long)p >= PIO_OFFSET) && \
+					((unsigned long)p <= (PIO_MASK + PIO_OFFSET)))
+static inline unsigned int
+__ixp4xx_ioread8(const void __iomem *addr)
+{
+	unsigned long port = (unsigned long __force)addr;
+	if (__is_io_address(port))
+		return	(unsigned int)__ixp4xx_inb(port & PIO_MASK);
+	else
+#ifndef CONFIG_IXP4XX_INDIRECT_PCI
+		return (unsigned int)__raw_readb(port);
+#else
+		return (unsigned int)__ixp4xx_readb(addr);
+#endif
+}
+
+static inline void
+__ixp4xx_ioread8_rep(const void __iomem *addr, void *vaddr, u32 count)
+{
+	unsigned long port = (unsigned long __force)addr;
+	if (__is_io_address(port))
+		__ixp4xx_insb(port & PIO_MASK, vaddr, count);
+	else
+#ifndef	CONFIG_IXP4XX_INDIRECT_PCI
+		__raw_readsb(addr, vaddr, count);
+#else
+		__ixp4xx_readsb(addr, vaddr, count);
+#endif
+}
+
+static inline unsigned int
+__ixp4xx_ioread16(const void __iomem *addr)
+{
+	unsigned long port = (unsigned long __force)addr;
+	if (__is_io_address(port))
+		return	(unsigned int)__ixp4xx_inw(port & PIO_MASK);
+	else
+#ifndef CONFIG_IXP4XX_INDIRECT_PCI
+		return le16_to_cpu(__raw_readw((u32)port));
+#else
+		return (unsigned int)__ixp4xx_readw(addr);
+#endif
+}
+
+static inline void
+__ixp4xx_ioread16_rep(const void __iomem *addr, void *vaddr, u32 count)
+{
+	unsigned long port = (unsigned long __force)addr;
+	if (__is_io_address(port))
+		__ixp4xx_insw(port & PIO_MASK, vaddr, count);
+	else
+#ifndef	CONFIG_IXP4XX_INDIRECT_PCI
+		__raw_readsw(addr, vaddr, count);
+#else
+		__ixp4xx_readsw(addr, vaddr, count);
+#endif
+}
+
+static inline unsigned int
+__ixp4xx_ioread32(const void __iomem *addr)
+{
+	unsigned long port = (unsigned long __force)addr;
+	if (__is_io_address(port))
+		return	(unsigned int)__ixp4xx_inl(port & PIO_MASK);
+	else {
+#ifndef CONFIG_IXP4XX_INDIRECT_PCI
+		return le32_to_cpu((__force __le32)__raw_readl(addr));
+#else
+		return (unsigned int)__ixp4xx_readl(addr);
+#endif
+	}
+}
+
+static inline void
+__ixp4xx_ioread32_rep(const void __iomem *addr, void *vaddr, u32 count)
+{
+	unsigned long port = (unsigned long __force)addr;
+	if (__is_io_address(port))
+		__ixp4xx_insl(port & PIO_MASK, vaddr, count);
+	else
+#ifndef	CONFIG_IXP4XX_INDIRECT_PCI
+		__raw_readsl(addr, vaddr, count);
+#else
+		__ixp4xx_readsl(addr, vaddr, count);
+#endif
+}
+
+static inline void
+__ixp4xx_iowrite8(u8 value, void __iomem *addr)
+{
+	unsigned long port = (unsigned long __force)addr;
+	if (__is_io_address(port))
+		__ixp4xx_outb(value, port & PIO_MASK);
+	else
+#ifndef CONFIG_IXP4XX_INDIRECT_PCI
+		__raw_writeb(value, port);
+#else
+		__ixp4xx_writeb(value, addr);
+#endif
+}
+
+static inline void
+__ixp4xx_iowrite8_rep(void __iomem *addr, const void *vaddr, u32 count)
+{
+	unsigned long port = (unsigned long __force)addr;
+	if (__is_io_address(port))
+		__ixp4xx_outsb(port & PIO_MASK, vaddr, count);
+	else
+#ifndef CONFIG_IXP4XX_INDIRECT_PCI
+		__raw_writesb(addr, vaddr, count);
+#else
+		__ixp4xx_writesb(addr, vaddr, count);
+#endif
+}
+
+static inline void
+__ixp4xx_iowrite16(u16 value, void __iomem *addr)
+{
+	unsigned long port = (unsigned long __force)addr;
+	if (__is_io_address(port))
+		__ixp4xx_outw(value, port & PIO_MASK);
+	else
+#ifndef CONFIG_IXP4XX_INDIRECT_PCI
+		__raw_writew(cpu_to_le16(value), addr);
+#else
+		__ixp4xx_writew(value, addr);
+#endif
+}
+
+static inline void
+__ixp4xx_iowrite16_rep(void __iomem *addr, const void *vaddr, u32 count)
+{
+	unsigned long port = (unsigned long __force)addr;
+	if (__is_io_address(port))
+		__ixp4xx_outsw(port & PIO_MASK, vaddr, count);
+	else
+#ifndef CONFIG_IXP4XX_INDIRECT_PCI
+		__raw_writesw(addr, vaddr, count);
+#else
+		__ixp4xx_writesw(addr, vaddr, count);
+#endif
+}
+
+static inline void
+__ixp4xx_iowrite32(u32 value, void __iomem *addr)
+{
+	unsigned long port = (unsigned long __force)addr;
+	if (__is_io_address(port))
+		__ixp4xx_outl(value, port & PIO_MASK);
+	else
+#ifndef CONFIG_IXP4XX_INDIRECT_PCI
+		__raw_writel((u32 __force)cpu_to_le32(value), addr);
+#else
+		__ixp4xx_writel(value, addr);
+#endif
+}
+
+static inline void
+__ixp4xx_iowrite32_rep(void __iomem *addr, const void *vaddr, u32 count)
+{
+	unsigned long port = (unsigned long __force)addr;
+	if (__is_io_address(port))
+		__ixp4xx_outsl(port & PIO_MASK, vaddr, count);
+	else
+#ifndef CONFIG_IXP4XX_INDIRECT_PCI
+		__raw_writesl(addr, vaddr, count);
+#else
+		__ixp4xx_writesl(addr, vaddr, count);
+#endif
+}
+
+#define	ioread8(p)			__ixp4xx_ioread8(p)
+#define	ioread16(p)			__ixp4xx_ioread16(p)
+#define	ioread32(p)			__ixp4xx_ioread32(p)
+
+#define	ioread8_rep(p, v, c)		__ixp4xx_ioread8_rep(p, v, c)
+#define	ioread16_rep(p, v, c)		__ixp4xx_ioread16_rep(p, v, c)
+#define	ioread32_rep(p, v, c)		__ixp4xx_ioread32_rep(p, v, c)
+
+#define	iowrite8(v,p)			__ixp4xx_iowrite8(v,p)
+#define	iowrite16(v,p)			__ixp4xx_iowrite16(v,p)
+#define	iowrite32(v,p)			__ixp4xx_iowrite32(v,p)
+
+#define	iowrite8_rep(p, v, c)		__ixp4xx_iowrite8_rep(p, v, c)
+#define	iowrite16_rep(p, v, c)		__ixp4xx_iowrite16_rep(p, v, c)
+#define	iowrite32_rep(p, v, c)		__ixp4xx_iowrite32_rep(p, v, c)
+
+#define	ioport_map(port, nr)		((void __iomem*)(port + PIO_OFFSET))
+#define	ioport_unmap(addr)
+#endif	// !CONFIG_PCI
+
+#endif	//  __ASM_ARM_ARCH_IO_H
+
diff --git a/arch/arm/mach-ixp4xx/include/mach/irqs.h b/arch/arm/mach-ixp4xx/include/mach/irqs.h
new file mode 100644
index 000000000000..f4d74de1566a
--- /dev/null
+++ b/arch/arm/mach-ixp4xx/include/mach/irqs.h
@@ -0,0 +1,138 @@
+/*
+ * arch/arm/mach-ixp4xx/include/mach/irqs.h 
+ *
+ * IRQ definitions for IXP4XX based systems
+ *
+ * Copyright (C) 2002 Intel Corporation.
+ * Copyright (C) 2003 MontaVista Software, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#ifndef _ARCH_IXP4XX_IRQS_H_
+#define _ARCH_IXP4XX_IRQS_H_
+
+
+#define IRQ_IXP4XX_NPEA		0
+#define IRQ_IXP4XX_NPEB		1
+#define IRQ_IXP4XX_NPEC		2
+#define IRQ_IXP4XX_QM1		3
+#define IRQ_IXP4XX_QM2		4
+#define IRQ_IXP4XX_TIMER1	5
+#define IRQ_IXP4XX_GPIO0	6
+#define IRQ_IXP4XX_GPIO1	7
+#define IRQ_IXP4XX_PCI_INT	8
+#define IRQ_IXP4XX_PCI_DMA1	9
+#define IRQ_IXP4XX_PCI_DMA2	10
+#define IRQ_IXP4XX_TIMER2	11
+#define IRQ_IXP4XX_USB		12
+#define IRQ_IXP4XX_UART2	13
+#define IRQ_IXP4XX_TIMESTAMP	14
+#define IRQ_IXP4XX_UART1	15
+#define IRQ_IXP4XX_WDOG		16
+#define IRQ_IXP4XX_AHB_PMU	17
+#define IRQ_IXP4XX_XSCALE_PMU	18
+#define IRQ_IXP4XX_GPIO2	19
+#define IRQ_IXP4XX_GPIO3	20
+#define IRQ_IXP4XX_GPIO4	21
+#define IRQ_IXP4XX_GPIO5	22
+#define IRQ_IXP4XX_GPIO6	23
+#define IRQ_IXP4XX_GPIO7	24
+#define IRQ_IXP4XX_GPIO8	25
+#define IRQ_IXP4XX_GPIO9	26
+#define IRQ_IXP4XX_GPIO10	27
+#define IRQ_IXP4XX_GPIO11	28
+#define IRQ_IXP4XX_GPIO12	29
+#define IRQ_IXP4XX_SW_INT1	30
+#define IRQ_IXP4XX_SW_INT2	31
+#define IRQ_IXP4XX_USB_HOST	32
+#define IRQ_IXP4XX_I2C		33
+#define IRQ_IXP4XX_SSP		34
+#define IRQ_IXP4XX_TSYNC	35
+#define IRQ_IXP4XX_EAU_DONE	36
+#define IRQ_IXP4XX_SHA_DONE	37
+#define IRQ_IXP4XX_SWCP_PE	58
+#define IRQ_IXP4XX_QM_PE	60
+#define IRQ_IXP4XX_MCU_ECC	61
+#define IRQ_IXP4XX_EXP_PE	62
+
+/*
+ * Only first 32 sources are valid if running on IXP42x systems
+ */
+#if defined(CONFIG_CPU_IXP46X) || defined(CONFIG_CPU_IXP43X)
+#define NR_IRQS			64
+#else
+#define NR_IRQS			32
+#endif
+
+#define	XSCALE_PMU_IRQ		(IRQ_IXP4XX_XSCALE_PMU)
+
+/*
+ * IXDP425 board IRQs
+ */
+#define	IRQ_IXDP425_PCI_INTA	IRQ_IXP4XX_GPIO11
+#define	IRQ_IXDP425_PCI_INTB	IRQ_IXP4XX_GPIO10
+#define	IRQ_IXDP425_PCI_INTC	IRQ_IXP4XX_GPIO9
+#define	IRQ_IXDP425_PCI_INTD	IRQ_IXP4XX_GPIO8
+
+/*
+ * Gateworks Avila board IRQs
+ */
+#define	IRQ_AVILA_PCI_INTA	IRQ_IXP4XX_GPIO11
+#define	IRQ_AVILA_PCI_INTB	IRQ_IXP4XX_GPIO10
+#define	IRQ_AVILA_PCI_INTC	IRQ_IXP4XX_GPIO9
+#define	IRQ_AVILA_PCI_INTD	IRQ_IXP4XX_GPIO8
+
+
+/*
+ * PrPMC1100 Board IRQs
+ */
+#define	IRQ_PRPMC1100_PCI_INTA	IRQ_IXP4XX_GPIO11
+#define	IRQ_PRPMC1100_PCI_INTB	IRQ_IXP4XX_GPIO10
+#define	IRQ_PRPMC1100_PCI_INTC	IRQ_IXP4XX_GPIO9
+#define	IRQ_PRPMC1100_PCI_INTD	IRQ_IXP4XX_GPIO8
+
+/*
+ * ADI Coyote Board IRQs
+ */
+#define	IRQ_COYOTE_PCI_SLOT0	IRQ_IXP4XX_GPIO6
+#define	IRQ_COYOTE_PCI_SLOT1	IRQ_IXP4XX_GPIO11
+#define	IRQ_COYOTE_IDE		IRQ_IXP4XX_GPIO5
+
+/*
+ * NSLU2 board IRQs
+ */
+#define        IRQ_NSLU2_PCI_INTA      IRQ_IXP4XX_GPIO11
+#define        IRQ_NSLU2_PCI_INTB      IRQ_IXP4XX_GPIO10
+#define        IRQ_NSLU2_PCI_INTC      IRQ_IXP4XX_GPIO9
+
+/*
+ * NAS100D board IRQs
+ */
+#define        IRQ_NAS100D_PCI_INTA    IRQ_IXP4XX_GPIO11
+#define        IRQ_NAS100D_PCI_INTB    IRQ_IXP4XX_GPIO10
+#define        IRQ_NAS100D_PCI_INTC    IRQ_IXP4XX_GPIO9
+#define        IRQ_NAS100D_PCI_INTD    IRQ_IXP4XX_GPIO8
+#define        IRQ_NAS100D_PCI_INTE    IRQ_IXP4XX_GPIO7
+
+/*
+ * D-Link DSM-G600 RevA board IRQs
+ */
+#define        IRQ_DSMG600_PCI_INTA    IRQ_IXP4XX_GPIO11
+#define        IRQ_DSMG600_PCI_INTB    IRQ_IXP4XX_GPIO10
+#define        IRQ_DSMG600_PCI_INTC    IRQ_IXP4XX_GPIO9
+#define        IRQ_DSMG600_PCI_INTD    IRQ_IXP4XX_GPIO8
+#define        IRQ_DSMG600_PCI_INTE    IRQ_IXP4XX_GPIO7
+#define        IRQ_DSMG600_PCI_INTF    IRQ_IXP4XX_GPIO6
+
+/*
+ * Freecom FSG-3 Board IRQs
+ */
+#define        IRQ_FSG_PCI_INTA        IRQ_IXP4XX_GPIO6
+#define        IRQ_FSG_PCI_INTB        IRQ_IXP4XX_GPIO7
+#define        IRQ_FSG_PCI_INTC        IRQ_IXP4XX_GPIO5
+
+#endif
diff --git a/include/asm-arm/arch-ixp4xx/ixdp425.h b/arch/arm/mach-ixp4xx/include/mach/ixdp425.h
index e0791af3bfea..2cafe65ebfee 100644
--- a/include/asm-arm/arch-ixp4xx/ixdp425.h
+++ b/arch/arm/mach-ixp4xx/include/mach/ixdp425.h
@@ -1,5 +1,5 @@
 /*
- * include/asm-arm/arch-ixp4xx/ixdp425.h
+ * arch/arm/mach-ixp4xx/include/mach/ixdp425.h
  *
  * IXDP425 platform specific definitions
  *
@@ -13,7 +13,7 @@
  */
 
 #ifndef __ASM_ARCH_HARDWARE_H__
-#error "Do not include this directly, instead #include <asm/hardware.h>"
+#error "Do not include this directly, instead #include <mach/hardware.h>"
 #endif
 
 #define	IXDP425_SDA_PIN		7
diff --git a/include/asm-arm/arch-ixp4xx/ixp4xx-regs.h b/arch/arm/mach-ixp4xx/include/mach/ixp4xx-regs.h
index 68aca8554f5a..ad9c888dd850 100644
--- a/include/asm-arm/arch-ixp4xx/ixp4xx-regs.h
+++ b/arch/arm/mach-ixp4xx/include/mach/ixp4xx-regs.h
@@ -1,5 +1,5 @@
 /*
- * include/asm-arm/arch-ixp4xx/ixp4xx-regs.h
+ * arch/arm/mach-ixp4xx/include/mach/ixp4xx-regs.h
  *
  * Register definitions for IXP4xx chipset. This file contains 
  * register location and bit definitions only. Platform specific 
diff --git a/arch/arm/mach-ixp4xx/include/mach/memory.h b/arch/arm/mach-ixp4xx/include/mach/memory.h
new file mode 100644
index 000000000000..c4d2830ac987
--- /dev/null
+++ b/arch/arm/mach-ixp4xx/include/mach/memory.h
@@ -0,0 +1,40 @@
+/*
+ * arch/arm/mach-ixp4xx/include/mach/memory.h
+ *
+ * Copyright (c) 2001-2004 MontaVista Software, Inc.
+ */
+
+#ifndef __ASM_ARCH_MEMORY_H
+#define __ASM_ARCH_MEMORY_H
+
+#include <asm/sizes.h>
+
+/*
+ * Physical DRAM offset.
+ */
+#define PHYS_OFFSET	UL(0x00000000)
+
+#if !defined(__ASSEMBLY__) && defined(CONFIG_PCI)
+
+void ixp4xx_adjust_zones(int node, unsigned long *size, unsigned long *holes);
+
+#define arch_adjust_zones(node, size, holes) \
+	ixp4xx_adjust_zones(node, size, holes)
+
+#define ISA_DMA_THRESHOLD (SZ_64M - 1)
+
+#endif
+
+/*
+ * Virtual view <-> DMA view memory address translations
+ * virt_to_bus: Used to translate the virtual address to an
+ *		address suitable to be passed to set_dma_addr
+ * bus_to_virt: Used to convert an address for DMA operations
+ *		to an address that the kernel can use.
+ *
+ * These are dummies for now.
+ */
+#define __virt_to_bus(x)	 __virt_to_phys(x)
+#define __bus_to_virt(x)	 __phys_to_virt(x)
+
+#endif
diff --git a/include/asm-arm/arch-ixp4xx/nas100d.h b/arch/arm/mach-ixp4xx/include/mach/nas100d.h
index 98d937897bce..3771d62a9748 100644
--- a/include/asm-arm/arch-ixp4xx/nas100d.h
+++ b/arch/arm/mach-ixp4xx/include/mach/nas100d.h
@@ -1,5 +1,5 @@
 /*
- * include/asm-arm/arch-ixp4xx/nas100d.h
+ * arch/arm/mach-ixp4xx/include/mach/nas100d.h
  *
  * NAS100D platform specific definitions
  *
@@ -16,7 +16,7 @@
  */
 
 #ifndef __ASM_ARCH_HARDWARE_H__
-#error "Do not include this directly, instead #include <asm/hardware.h>"
+#error "Do not include this directly, instead #include <mach/hardware.h>"
 #endif
 
 #define NAS100D_SDA_PIN		5
diff --git a/include/asm-arm/arch-ixp4xx/npe.h b/arch/arm/mach-ixp4xx/include/mach/npe.h
index 37d0511689dc..37d0511689dc 100644
--- a/include/asm-arm/arch-ixp4xx/npe.h
+++ b/arch/arm/mach-ixp4xx/include/mach/npe.h
diff --git a/include/asm-arm/arch-ixp4xx/nslu2.h b/arch/arm/mach-ixp4xx/include/mach/nslu2.h
index 714bbc65126a..85d00adbfb92 100644
--- a/include/asm-arm/arch-ixp4xx/nslu2.h
+++ b/arch/arm/mach-ixp4xx/include/mach/nslu2.h
@@ -1,5 +1,5 @@
 /*
- * include/asm-arm/arch-ixp4xx/nslu2.h
+ * arch/arm/mach-ixp4xx/include/mach/nslu2.h
  *
  * NSLU2 platform specific definitions
  *
@@ -15,7 +15,7 @@
  */
 
 #ifndef __ASM_ARCH_HARDWARE_H__
-#error "Do not include this directly, instead #include <asm/hardware.h>"
+#error "Do not include this directly, instead #include <mach/hardware.h>"
 #endif
 
 #define NSLU2_SDA_PIN		7
diff --git a/arch/arm/mach-ixp4xx/include/mach/platform.h b/arch/arm/mach-ixp4xx/include/mach/platform.h
new file mode 100644
index 000000000000..e824c02c825a
--- /dev/null
+++ b/arch/arm/mach-ixp4xx/include/mach/platform.h
@@ -0,0 +1,173 @@
+/*
+ * arch/arm/mach-ixp4xx/include/mach/platform.h
+ *
+ * Constants and functions that are useful to IXP4xx platform-specific code
+ * and device drivers.
+ *
+ * Copyright (C) 2004 MontaVista Software, Inc.
+ */
+
+#ifndef __ASM_ARCH_HARDWARE_H__
+#error "Do not include this directly, instead #include <mach/hardware.h>"
+#endif
+
+#ifndef __ASSEMBLY__
+
+#include <asm/types.h>
+
+#ifndef	__ARMEB__
+#define	REG_OFFSET	0
+#else
+#define	REG_OFFSET	3
+#endif
+
+/*
+ * Expansion bus memory regions
+ */
+#define IXP4XX_EXP_BUS_BASE_PHYS	(0x50000000)
+
+/*
+ * The expansion bus on the IXP4xx can be configured for either 16 or
+ * 32MB windows and the CS offset for each region changes based on the
+ * current configuration. This means that we cannot simply hardcode
+ * each offset. ixp4xx_sys_init() looks at the expansion bus configuration
+ * as setup by the bootloader to determine our window size.
+ */
+extern unsigned long ixp4xx_exp_bus_size;
+
+#define	IXP4XX_EXP_BUS_BASE(region)\
+		(IXP4XX_EXP_BUS_BASE_PHYS + ((region) * ixp4xx_exp_bus_size))
+
+#define IXP4XX_EXP_BUS_END(region)\
+		(IXP4XX_EXP_BUS_BASE(region) + ixp4xx_exp_bus_size - 1)
+
+/* Those macros can be used to adjust timing and configure
+ * other features for each region.
+ */
+
+#define IXP4XX_EXP_BUS_RECOVERY_T(x)	(((x) & 0x0f) << 16)
+#define IXP4XX_EXP_BUS_HOLD_T(x)	(((x) & 0x03) << 20)
+#define IXP4XX_EXP_BUS_STROBE_T(x)	(((x) & 0x0f) << 22)
+#define IXP4XX_EXP_BUS_SETUP_T(x)	(((x) & 0x03) << 26)
+#define IXP4XX_EXP_BUS_ADDR_T(x)	(((x) & 0x03) << 28)
+#define IXP4XX_EXP_BUS_SIZE(x)		(((x) & 0x0f) << 10)
+#define IXP4XX_EXP_BUS_CYCLES(x)	(((x) & 0x03) << 14)
+
+#define IXP4XX_EXP_BUS_CS_EN		(1L << 31)
+#define IXP4XX_EXP_BUS_BYTE_RD16	(1L << 6)
+#define IXP4XX_EXP_BUS_HRDY_POL		(1L << 5)
+#define IXP4XX_EXP_BUS_MUX_EN		(1L << 4)
+#define IXP4XX_EXP_BUS_SPLT_EN		(1L << 3)
+#define IXP4XX_EXP_BUS_WR_EN		(1L << 1)
+#define IXP4XX_EXP_BUS_BYTE_EN		(1L << 0)
+
+#define IXP4XX_EXP_BUS_CYCLES_INTEL	0x00
+#define IXP4XX_EXP_BUS_CYCLES_MOTOROLA	0x01
+#define IXP4XX_EXP_BUS_CYCLES_HPI	0x02
+
+#define IXP4XX_FLASH_WRITABLE	(0x2)
+#define IXP4XX_FLASH_DEFAULT	(0xbcd23c40)
+#define IXP4XX_FLASH_WRITE	(0xbcd23c42)
+
+/*
+ * Clock Speed Definitions.
+ */
+#define IXP4XX_PERIPHERAL_BUS_CLOCK 	(66) /* 66Mhzi APB BUS   */ 
+#define IXP4XX_UART_XTAL        	14745600
+
+/*
+ * This structure provide a means for the board setup code
+ * to give information to th pata_ixp4xx driver. It is
+ * passed as platform_data.
+ */
+struct ixp4xx_pata_data {
+	volatile u32	*cs0_cfg;
+	volatile u32	*cs1_cfg;
+	unsigned long	cs0_bits;
+	unsigned long	cs1_bits;
+	void __iomem	*cs0;
+	void __iomem	*cs1;
+};
+
+struct sys_timer;
+
+#define IXP4XX_ETH_NPEA		0x00
+#define IXP4XX_ETH_NPEB		0x10
+#define IXP4XX_ETH_NPEC		0x20
+
+/* Information about built-in Ethernet MAC interfaces */
+struct eth_plat_info {
+	u8 phy;		/* MII PHY ID, 0 - 31 */
+	u8 rxq;		/* configurable, currently 0 - 31 only */
+	u8 txreadyq;
+	u8 hwaddr[6];
+};
+
+/* Information about built-in HSS (synchronous serial) interfaces */
+struct hss_plat_info {
+	int (*set_clock)(int port, unsigned int clock_type);
+	int (*open)(int port, void *pdev,
+		    void (*set_carrier_cb)(void *pdev, int carrier));
+	void (*close)(int port, void *pdev);
+	u8 txreadyq;
+};
+
+/*
+ * Frequency of clock used for primary clocksource
+ */
+extern unsigned long ixp4xx_timer_freq;
+
+/*
+ * Functions used by platform-level setup code
+ */
+extern void ixp4xx_map_io(void);
+extern void ixp4xx_init_irq(void);
+extern void ixp4xx_sys_init(void);
+extern void ixp4xx_timer_init(void);
+extern struct sys_timer ixp4xx_timer;
+extern void ixp4xx_pci_preinit(void);
+struct pci_sys_data;
+extern int ixp4xx_setup(int nr, struct pci_sys_data *sys);
+extern struct pci_bus *ixp4xx_scan_bus(int nr, struct pci_sys_data *sys);
+
+/*
+ * GPIO-functions
+ */
+/*
+ * The following converted to the real HW bits the gpio_line_config
+ */
+/* GPIO pin types */
+#define IXP4XX_GPIO_OUT 		0x1
+#define IXP4XX_GPIO_IN  		0x2
+
+/* GPIO signal types */
+#define IXP4XX_GPIO_LOW			0
+#define IXP4XX_GPIO_HIGH		1
+
+/* GPIO Clocks */
+#define IXP4XX_GPIO_CLK_0		14
+#define IXP4XX_GPIO_CLK_1		15
+
+static inline void gpio_line_config(u8 line, u32 direction)
+{
+	if (direction == IXP4XX_GPIO_IN)
+		*IXP4XX_GPIO_GPOER |= (1 << line);
+	else
+		*IXP4XX_GPIO_GPOER &= ~(1 << line);
+}
+
+static inline void gpio_line_get(u8 line, int *value)
+{
+	*value = (*IXP4XX_GPIO_GPINR >> line) & 0x1;
+}
+
+static inline void gpio_line_set(u8 line, int value)
+{
+	if (value == IXP4XX_GPIO_HIGH)
+	    *IXP4XX_GPIO_GPOUTR |= (1 << line);
+	else if (value == IXP4XX_GPIO_LOW)
+	    *IXP4XX_GPIO_GPOUTR &= ~(1 << line);
+}
+
+#endif // __ASSEMBLY__
+
diff --git a/include/asm-arm/arch-ixp4xx/prpmc1100.h b/arch/arm/mach-ixp4xx/include/mach/prpmc1100.h
index e2532ab7f48f..17274a2e3dec 100644
--- a/include/asm-arm/arch-ixp4xx/prpmc1100.h
+++ b/arch/arm/mach-ixp4xx/include/mach/prpmc1100.h
@@ -1,5 +1,5 @@
 /*
- * include/asm-arm/arch-ixp4xx/prpmc1100.h
+ * arch/arm/mach-ixp4xx/include/mach/prpmc1100.h
  *
  * Motorolla PrPMC1100 platform specific definitions
  *
@@ -13,7 +13,7 @@
  */
 
 #ifndef __ASM_ARCH_HARDWARE_H__
-#error "Do not include this directly, instead #include <asm/hardware.h>"
+#error "Do not include this directly, instead #include <mach/hardware.h>"
 #endif
 
 #define	PRPMC1100_FLASH_BASE	IXP4XX_EXP_BUS_CS0_BASE_PHYS
diff --git a/include/asm-arm/arch-ixp4xx/qmgr.h b/arch/arm/mach-ixp4xx/include/mach/qmgr.h
index 1e52b95cede5..1e52b95cede5 100644
--- a/include/asm-arm/arch-ixp4xx/qmgr.h
+++ b/arch/arm/mach-ixp4xx/include/mach/qmgr.h
diff --git a/arch/arm/mach-ixp4xx/include/mach/system.h b/arch/arm/mach-ixp4xx/include/mach/system.h
new file mode 100644
index 000000000000..92a7e8ddf69a
--- /dev/null
+++ b/arch/arm/mach-ixp4xx/include/mach/system.h
@@ -0,0 +1,42 @@
+/*
+ * arch/arm/mach-ixp4xx/include/mach/system.h
+ *
+ * Copyright (C) 2002 Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <mach/hardware.h>
+
+static inline void arch_idle(void)
+{
+#if 0
+	if (!hlt_counter)
+		cpu_do_idle(0);
+#endif
+}
+
+
+static inline void arch_reset(char mode)
+{
+	if ( 1 && mode == 's') {
+		/* Jump into ROM at address 0 */
+		cpu_reset(0);
+	} else {
+		/* Use on-chip reset capability */
+
+		/* set the "key" register to enable access to
+		 * "timer" and "enable" registers
+		 */
+		*IXP4XX_OSWK = IXP4XX_WDT_KEY;
+
+		/* write 0 to the timer register for an immediate reset */
+		*IXP4XX_OSWT = 0;
+
+		*IXP4XX_OSWE = IXP4XX_WDT_RESET_ENABLE | IXP4XX_WDT_COUNT_ENABLE;
+	}
+}
+
diff --git a/arch/arm/mach-ixp4xx/include/mach/timex.h b/arch/arm/mach-ixp4xx/include/mach/timex.h
new file mode 100644
index 000000000000..89ce3ee84698
--- /dev/null
+++ b/arch/arm/mach-ixp4xx/include/mach/timex.h
@@ -0,0 +1,15 @@
+/*
+ * arch/arm/mach-ixp4xx/include/mach/timex.h
+ * 
+ */
+
+#include <mach/hardware.h>
+
+/*
+ * We use IXP425 General purpose timer for our timer needs, it runs at 
+ * 66.66... MHz. We do a convulted calculation of CLOCK_TICK_RATE b/c the
+ * timer register ignores the bottom 2 bits of the LATCH value.
+ */
+#define FREQ 66666666
+#define CLOCK_TICK_RATE (((FREQ / HZ & ~IXP4XX_OST_RELOAD_MASK) + 1) * HZ)
+
diff --git a/arch/arm/mach-ixp4xx/include/mach/udc.h b/arch/arm/mach-ixp4xx/include/mach/udc.h
new file mode 100644
index 000000000000..80d6da2eafac
--- /dev/null
+++ b/arch/arm/mach-ixp4xx/include/mach/udc.h
@@ -0,0 +1,8 @@
+/*
+ * arch/arm/mach-ixp4xx/include/mach/udc.h
+ *
+ */
+#include <asm/mach/udc_pxa2xx.h>
+
+extern void ixp4xx_set_udc_info(struct pxa2xx_udc_mach_info *info);
+
diff --git a/arch/arm/mach-ixp4xx/include/mach/uncompress.h b/arch/arm/mach-ixp4xx/include/mach/uncompress.h
new file mode 100644
index 000000000000..2db0078a8cf2
--- /dev/null
+++ b/arch/arm/mach-ixp4xx/include/mach/uncompress.h
@@ -0,0 +1,57 @@
+/*
+ * arch/arm/mach-ixp4xx/include/mach/uncompress.h 
+ *
+ * Copyright (C) 2002 Intel Corporation.
+ * Copyright (C) 2003-2004 MontaVista Software, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#ifndef _ARCH_UNCOMPRESS_H_
+#define _ARCH_UNCOMPRESS_H_
+
+#include "ixp4xx-regs.h"
+#include <asm/mach-types.h>
+#include <linux/serial_reg.h>
+
+#define TX_DONE (UART_LSR_TEMT|UART_LSR_THRE)
+
+static volatile u32* uart_base;
+
+static inline void putc(int c)
+{
+	/* Check THRE and TEMT bits before we transmit the character.
+	 */
+	while ((uart_base[UART_LSR] & TX_DONE) != TX_DONE)
+		barrier();
+
+	*uart_base = c;
+}
+
+static void flush(void)
+{
+}
+
+static __inline__ void __arch_decomp_setup(unsigned long arch_id)
+{
+	/*
+	 * Some boards are using UART2 as console
+	 */
+	if (machine_is_adi_coyote() || machine_is_gtwx5715() ||
+			 machine_is_gateway7001() || machine_is_wg302v2())
+		uart_base = (volatile u32*) IXP4XX_UART2_BASE_PHYS;
+	else
+		uart_base = (volatile u32*) IXP4XX_UART1_BASE_PHYS;
+}
+
+/*
+ * arch_id is a variable in decompress_kernel()
+ */
+#define arch_decomp_setup()	__arch_decomp_setup(arch_id)
+
+#define arch_decomp_wdog()
+
+#endif
diff --git a/arch/arm/mach-ixp4xx/include/mach/vmalloc.h b/arch/arm/mach-ixp4xx/include/mach/vmalloc.h
new file mode 100644
index 000000000000..7b3580b53adf
--- /dev/null
+++ b/arch/arm/mach-ixp4xx/include/mach/vmalloc.h
@@ -0,0 +1,5 @@
+/*
+ * arch/arm/mach-ixp4xx/include/mach/vmalloc.h
+ */
+#define VMALLOC_END       (0xFF000000)
+
diff --git a/arch/arm/mach-ixp4xx/ixdp425-pci.c b/arch/arm/mach-ixp4xx/ixdp425-pci.c
index 408796004812..64c29aacaac9 100644
--- a/arch/arm/mach-ixp4xx/ixdp425-pci.c
+++ b/arch/arm/mach-ixp4xx/ixdp425-pci.c
@@ -22,15 +22,15 @@
 
 #include <asm/mach/pci.h>
 #include <asm/irq.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/mach-types.h>
 
 void __init ixdp425_pci_preinit(void)
 {
-	set_irq_type(IRQ_IXDP425_PCI_INTA, IRQT_LOW);
-	set_irq_type(IRQ_IXDP425_PCI_INTB, IRQT_LOW);
-	set_irq_type(IRQ_IXDP425_PCI_INTC, IRQT_LOW);
-	set_irq_type(IRQ_IXDP425_PCI_INTD, IRQT_LOW);
+	set_irq_type(IRQ_IXDP425_PCI_INTA, IRQ_TYPE_LEVEL_LOW);
+	set_irq_type(IRQ_IXDP425_PCI_INTB, IRQ_TYPE_LEVEL_LOW);
+	set_irq_type(IRQ_IXDP425_PCI_INTC, IRQ_TYPE_LEVEL_LOW);
+	set_irq_type(IRQ_IXDP425_PCI_INTD, IRQ_TYPE_LEVEL_LOW);
 
 	ixp4xx_pci_preinit();
 }
diff --git a/arch/arm/mach-ixp4xx/ixdp425-setup.c b/arch/arm/mach-ixp4xx/ixdp425-setup.c
index 44584afb34a3..9b2d2ec14c80 100644
--- a/arch/arm/mach-ixp4xx/ixdp425-setup.c
+++ b/arch/arm/mach-ixp4xx/ixdp425-setup.c
@@ -24,7 +24,7 @@
 #include <asm/types.h>
 #include <asm/setup.h>
 #include <asm/memory.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/irq.h>
 #include <asm/mach/arch.h>
diff --git a/arch/arm/mach-ixp4xx/ixdpg425-pci.c b/arch/arm/mach-ixp4xx/ixdpg425-pci.c
index d1e75b7dc3b1..4ed7ac614920 100644
--- a/arch/arm/mach-ixp4xx/ixdpg425-pci.c
+++ b/arch/arm/mach-ixp4xx/ixdpg425-pci.c
@@ -19,14 +19,14 @@
 #include <linux/irq.h>
 
 #include <asm/mach-types.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 
 #include <asm/mach/pci.h>
 
 void __init ixdpg425_pci_preinit(void)
 {
-	set_irq_type(IRQ_IXP4XX_GPIO6, IRQT_LOW);
-	set_irq_type(IRQ_IXP4XX_GPIO7, IRQT_LOW);
+	set_irq_type(IRQ_IXP4XX_GPIO6, IRQ_TYPE_LEVEL_LOW);
+	set_irq_type(IRQ_IXP4XX_GPIO7, IRQ_TYPE_LEVEL_LOW);
 
 	ixp4xx_pci_preinit();
 }
diff --git a/arch/arm/mach-ixp4xx/ixp4xx_npe.c b/arch/arm/mach-ixp4xx/ixp4xx_npe.c
index 63a23fa4aab4..c73a94d0ca2b 100644
--- a/arch/arm/mach-ixp4xx/ixp4xx_npe.c
+++ b/arch/arm/mach-ixp4xx/ixp4xx_npe.c
@@ -21,7 +21,7 @@
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/slab.h>
-#include <asm/arch/npe.h>
+#include <mach/npe.h>
 
 #define DEBUG_MSG			0
 #define DEBUG_FW			0
diff --git a/arch/arm/mach-ixp4xx/ixp4xx_qmgr.c b/arch/arm/mach-ixp4xx/ixp4xx_qmgr.c
index fab94eaecee7..c6cb069a5a83 100644
--- a/arch/arm/mach-ixp4xx/ixp4xx_qmgr.c
+++ b/arch/arm/mach-ixp4xx/ixp4xx_qmgr.c
@@ -12,7 +12,7 @@
 #include <linux/interrupt.h>
 #include <linux/kernel.h>
 #include <linux/module.h>
-#include <asm/arch/qmgr.h>
+#include <mach/qmgr.h>
 
 #define DEBUG		0
 
diff --git a/arch/arm/mach-ixp4xx/nas100d-pci.c b/arch/arm/mach-ixp4xx/nas100d-pci.c
index b8ebaf4a9c8e..1088426fdcee 100644
--- a/arch/arm/mach-ixp4xx/nas100d-pci.c
+++ b/arch/arm/mach-ixp4xx/nas100d-pci.c
@@ -24,11 +24,11 @@
 
 void __init nas100d_pci_preinit(void)
 {
-	set_irq_type(IRQ_NAS100D_PCI_INTA, IRQT_LOW);
-	set_irq_type(IRQ_NAS100D_PCI_INTB, IRQT_LOW);
-	set_irq_type(IRQ_NAS100D_PCI_INTC, IRQT_LOW);
-	set_irq_type(IRQ_NAS100D_PCI_INTD, IRQT_LOW);
-	set_irq_type(IRQ_NAS100D_PCI_INTE, IRQT_LOW);
+	set_irq_type(IRQ_NAS100D_PCI_INTA, IRQ_TYPE_LEVEL_LOW);
+	set_irq_type(IRQ_NAS100D_PCI_INTB, IRQ_TYPE_LEVEL_LOW);
+	set_irq_type(IRQ_NAS100D_PCI_INTC, IRQ_TYPE_LEVEL_LOW);
+	set_irq_type(IRQ_NAS100D_PCI_INTD, IRQ_TYPE_LEVEL_LOW);
+	set_irq_type(IRQ_NAS100D_PCI_INTE, IRQ_TYPE_LEVEL_LOW);
 
 	ixp4xx_pci_preinit();
 }
diff --git a/arch/arm/mach-ixp4xx/nslu2-pci.c b/arch/arm/mach-ixp4xx/nslu2-pci.c
index 04661fef97f5..4429b8448b61 100644
--- a/arch/arm/mach-ixp4xx/nslu2-pci.c
+++ b/arch/arm/mach-ixp4xx/nslu2-pci.c
@@ -24,9 +24,9 @@
 
 void __init nslu2_pci_preinit(void)
 {
-	set_irq_type(IRQ_NSLU2_PCI_INTA, IRQT_LOW);
-	set_irq_type(IRQ_NSLU2_PCI_INTB, IRQT_LOW);
-	set_irq_type(IRQ_NSLU2_PCI_INTC, IRQT_LOW);
+	set_irq_type(IRQ_NSLU2_PCI_INTA, IRQ_TYPE_LEVEL_LOW);
+	set_irq_type(IRQ_NSLU2_PCI_INTB, IRQ_TYPE_LEVEL_LOW);
+	set_irq_type(IRQ_NSLU2_PCI_INTC, IRQ_TYPE_LEVEL_LOW);
 
 	ixp4xx_pci_preinit();
 }
diff --git a/arch/arm/mach-ixp4xx/wg302v2-pci.c b/arch/arm/mach-ixp4xx/wg302v2-pci.c
index 6588f2c758e2..9b59ed03b151 100644
--- a/arch/arm/mach-ixp4xx/wg302v2-pci.c
+++ b/arch/arm/mach-ixp4xx/wg302v2-pci.c
@@ -23,14 +23,14 @@
 #include <linux/irq.h>
 
 #include <asm/mach-types.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 
 #include <asm/mach/pci.h>
 
 void __init wg302v2_pci_preinit(void)
 {
-	set_irq_type(IRQ_IXP4XX_GPIO8, IRQT_LOW);
-	set_irq_type(IRQ_IXP4XX_GPIO9, IRQT_LOW);
+	set_irq_type(IRQ_IXP4XX_GPIO8, IRQ_TYPE_LEVEL_LOW);
+	set_irq_type(IRQ_IXP4XX_GPIO9, IRQ_TYPE_LEVEL_LOW);
 
 	ixp4xx_pci_preinit();
 }
diff --git a/arch/arm/mach-ixp4xx/wg302v2-setup.c b/arch/arm/mach-ixp4xx/wg302v2-setup.c
index f7e09ad804e8..7ea782021d1f 100644
--- a/arch/arm/mach-ixp4xx/wg302v2-setup.c
+++ b/arch/arm/mach-ixp4xx/wg302v2-setup.c
@@ -23,7 +23,7 @@
 #include <asm/types.h>
 #include <asm/setup.h>
 #include <asm/memory.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/irq.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
diff --git a/arch/arm/mach-kirkwood/addr-map.c b/arch/arm/mach-kirkwood/addr-map.c
index a39f0f3c4730..c79f492072f9 100644
--- a/arch/arm/mach-kirkwood/addr-map.c
+++ b/arch/arm/mach-kirkwood/addr-map.c
@@ -12,7 +12,7 @@
 #include <linux/init.h>
 #include <linux/mbus.h>
 #include <linux/io.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include "common.h"
 
 /*
diff --git a/arch/arm/mach-kirkwood/common.c b/arch/arm/mach-kirkwood/common.c
index 5938a3b33cdc..189f16f3619d 100644
--- a/arch/arm/mach-kirkwood/common.c
+++ b/arch/arm/mach-kirkwood/common.c
@@ -15,15 +15,17 @@
 #include <linux/mbus.h>
 #include <linux/mv643xx_eth.h>
 #include <linux/ata_platform.h>
+#include <linux/spi/orion_spi.h>
 #include <asm/page.h>
 #include <asm/timex.h>
 #include <asm/mach/map.h>
 #include <asm/mach/time.h>
-#include <asm/arch/kirkwood.h>
-#include <asm/plat-orion/cache-feroceon-l2.h>
-#include <asm/plat-orion/ehci-orion.h>
-#include <asm/plat-orion/orion_nand.h>
-#include <asm/plat-orion/time.h>
+#include <mach/kirkwood.h>
+#include <plat/cache-feroceon-l2.h>
+#include <plat/ehci-orion.h>
+#include <plat/mv_xor.h>
+#include <plat/orion_nand.h>
+#include <plat/time.h>
 #include "common.h"
 
 /*****************************************************************************
@@ -196,6 +198,37 @@ void __init kirkwood_sata_init(struct mv_sata_platform_data *sata_data)
 
 
 /*****************************************************************************
+ * SPI
+ ****************************************************************************/
+static struct orion_spi_info kirkwood_spi_plat_data = {
+	.tclk		= KIRKWOOD_TCLK,
+};
+
+static struct resource kirkwood_spi_resources[] = {
+	{
+		.start	= SPI_PHYS_BASE,
+		.end	= SPI_PHYS_BASE + SZ_512 - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+};
+
+static struct platform_device kirkwood_spi = {
+	.name		= "orion_spi",
+	.id		= 0,
+	.resource	= kirkwood_spi_resources,
+	.dev		= {
+		.platform_data	= &kirkwood_spi_plat_data,
+	},
+	.num_resources	= ARRAY_SIZE(kirkwood_spi_resources),
+};
+
+void __init kirkwood_spi_init()
+{
+	platform_device_register(&kirkwood_spi);
+}
+
+
+/*****************************************************************************
  * UART0
  ****************************************************************************/
 static struct plat_serial8250_port kirkwood_uart0_data[] = {
@@ -284,6 +317,212 @@ void __init kirkwood_uart1_init(void)
 
 
 /*****************************************************************************
+ * XOR
+ ****************************************************************************/
+static struct mv_xor_platform_shared_data kirkwood_xor_shared_data = {
+	.dram		= &kirkwood_mbus_dram_info,
+};
+
+static u64 kirkwood_xor_dmamask = DMA_32BIT_MASK;
+
+
+/*****************************************************************************
+ * XOR0
+ ****************************************************************************/
+static struct resource kirkwood_xor0_shared_resources[] = {
+	{
+		.name	= "xor 0 low",
+		.start	= XOR0_PHYS_BASE,
+		.end	= XOR0_PHYS_BASE + 0xff,
+		.flags	= IORESOURCE_MEM,
+	}, {
+		.name	= "xor 0 high",
+		.start	= XOR0_HIGH_PHYS_BASE,
+		.end	= XOR0_HIGH_PHYS_BASE + 0xff,
+		.flags	= IORESOURCE_MEM,
+	},
+};
+
+static struct platform_device kirkwood_xor0_shared = {
+	.name		= MV_XOR_SHARED_NAME,
+	.id		= 0,
+	.dev		= {
+		.platform_data = &kirkwood_xor_shared_data,
+	},
+	.num_resources	= ARRAY_SIZE(kirkwood_xor0_shared_resources),
+	.resource	= kirkwood_xor0_shared_resources,
+};
+
+static struct resource kirkwood_xor00_resources[] = {
+	[0] = {
+		.start	= IRQ_KIRKWOOD_XOR_00,
+		.end	= IRQ_KIRKWOOD_XOR_00,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct mv_xor_platform_data kirkwood_xor00_data = {
+	.shared		= &kirkwood_xor0_shared,
+	.hw_id		= 0,
+	.pool_size	= PAGE_SIZE,
+};
+
+static struct platform_device kirkwood_xor00_channel = {
+	.name		= MV_XOR_NAME,
+	.id		= 0,
+	.num_resources	= ARRAY_SIZE(kirkwood_xor00_resources),
+	.resource	= kirkwood_xor00_resources,
+	.dev		= {
+		.dma_mask		= &kirkwood_xor_dmamask,
+		.coherent_dma_mask	= DMA_64BIT_MASK,
+		.platform_data		= (void *)&kirkwood_xor00_data,
+	},
+};
+
+static struct resource kirkwood_xor01_resources[] = {
+	[0] = {
+		.start	= IRQ_KIRKWOOD_XOR_01,
+		.end	= IRQ_KIRKWOOD_XOR_01,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct mv_xor_platform_data kirkwood_xor01_data = {
+	.shared		= &kirkwood_xor0_shared,
+	.hw_id		= 1,
+	.pool_size	= PAGE_SIZE,
+};
+
+static struct platform_device kirkwood_xor01_channel = {
+	.name		= MV_XOR_NAME,
+	.id		= 1,
+	.num_resources	= ARRAY_SIZE(kirkwood_xor01_resources),
+	.resource	= kirkwood_xor01_resources,
+	.dev		= {
+		.dma_mask		= &kirkwood_xor_dmamask,
+		.coherent_dma_mask	= DMA_64BIT_MASK,
+		.platform_data		= (void *)&kirkwood_xor01_data,
+	},
+};
+
+void __init kirkwood_xor0_init(void)
+{
+	platform_device_register(&kirkwood_xor0_shared);
+
+	/*
+	 * two engines can't do memset simultaneously, this limitation
+	 * satisfied by removing memset support from one of the engines.
+	 */
+	dma_cap_set(DMA_MEMCPY, kirkwood_xor00_data.cap_mask);
+	dma_cap_set(DMA_XOR, kirkwood_xor00_data.cap_mask);
+	platform_device_register(&kirkwood_xor00_channel);
+
+	dma_cap_set(DMA_MEMCPY, kirkwood_xor01_data.cap_mask);
+	dma_cap_set(DMA_MEMSET, kirkwood_xor01_data.cap_mask);
+	dma_cap_set(DMA_XOR, kirkwood_xor01_data.cap_mask);
+	platform_device_register(&kirkwood_xor01_channel);
+}
+
+
+/*****************************************************************************
+ * XOR1
+ ****************************************************************************/
+static struct resource kirkwood_xor1_shared_resources[] = {
+	{
+		.name	= "xor 1 low",
+		.start	= XOR1_PHYS_BASE,
+		.end	= XOR1_PHYS_BASE + 0xff,
+		.flags	= IORESOURCE_MEM,
+	}, {
+		.name	= "xor 1 high",
+		.start	= XOR1_HIGH_PHYS_BASE,
+		.end	= XOR1_HIGH_PHYS_BASE + 0xff,
+		.flags	= IORESOURCE_MEM,
+	},
+};
+
+static struct platform_device kirkwood_xor1_shared = {
+	.name		= MV_XOR_SHARED_NAME,
+	.id		= 1,
+	.dev		= {
+		.platform_data = &kirkwood_xor_shared_data,
+	},
+	.num_resources	= ARRAY_SIZE(kirkwood_xor1_shared_resources),
+	.resource	= kirkwood_xor1_shared_resources,
+};
+
+static struct resource kirkwood_xor10_resources[] = {
+	[0] = {
+		.start	= IRQ_KIRKWOOD_XOR_10,
+		.end	= IRQ_KIRKWOOD_XOR_10,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct mv_xor_platform_data kirkwood_xor10_data = {
+	.shared		= &kirkwood_xor1_shared,
+	.hw_id		= 0,
+	.pool_size	= PAGE_SIZE,
+};
+
+static struct platform_device kirkwood_xor10_channel = {
+	.name		= MV_XOR_NAME,
+	.id		= 2,
+	.num_resources	= ARRAY_SIZE(kirkwood_xor10_resources),
+	.resource	= kirkwood_xor10_resources,
+	.dev		= {
+		.dma_mask		= &kirkwood_xor_dmamask,
+		.coherent_dma_mask	= DMA_64BIT_MASK,
+		.platform_data		= (void *)&kirkwood_xor10_data,
+	},
+};
+
+static struct resource kirkwood_xor11_resources[] = {
+	[0] = {
+		.start	= IRQ_KIRKWOOD_XOR_11,
+		.end	= IRQ_KIRKWOOD_XOR_11,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct mv_xor_platform_data kirkwood_xor11_data = {
+	.shared		= &kirkwood_xor1_shared,
+	.hw_id		= 1,
+	.pool_size	= PAGE_SIZE,
+};
+
+static struct platform_device kirkwood_xor11_channel = {
+	.name		= MV_XOR_NAME,
+	.id		= 3,
+	.num_resources	= ARRAY_SIZE(kirkwood_xor11_resources),
+	.resource	= kirkwood_xor11_resources,
+	.dev		= {
+		.dma_mask		= &kirkwood_xor_dmamask,
+		.coherent_dma_mask	= DMA_64BIT_MASK,
+		.platform_data		= (void *)&kirkwood_xor11_data,
+	},
+};
+
+void __init kirkwood_xor1_init(void)
+{
+	platform_device_register(&kirkwood_xor1_shared);
+
+	/*
+	 * two engines can't do memset simultaneously, this limitation
+	 * satisfied by removing memset support from one of the engines.
+	 */
+	dma_cap_set(DMA_MEMCPY, kirkwood_xor10_data.cap_mask);
+	dma_cap_set(DMA_XOR, kirkwood_xor10_data.cap_mask);
+	platform_device_register(&kirkwood_xor10_channel);
+
+	dma_cap_set(DMA_MEMCPY, kirkwood_xor11_data.cap_mask);
+	dma_cap_set(DMA_MEMSET, kirkwood_xor11_data.cap_mask);
+	dma_cap_set(DMA_XOR, kirkwood_xor11_data.cap_mask);
+	platform_device_register(&kirkwood_xor11_channel);
+}
+
+
+/*****************************************************************************
  * Time handling
  ****************************************************************************/
 static void kirkwood_timer_init(void)
diff --git a/arch/arm/mach-kirkwood/common.h b/arch/arm/mach-kirkwood/common.h
index 5dee2f6b40a5..69cd113af03a 100644
--- a/arch/arm/mach-kirkwood/common.h
+++ b/arch/arm/mach-kirkwood/common.h
@@ -33,8 +33,11 @@ void kirkwood_ge00_init(struct mv643xx_eth_platform_data *eth_data);
 void kirkwood_pcie_init(void);
 void kirkwood_rtc_init(void);
 void kirkwood_sata_init(struct mv_sata_platform_data *sata_data);
+void kirkwood_spi_init(void);
 void kirkwood_uart0_init(void);
 void kirkwood_uart1_init(void);
+void kirkwood_xor0_init(void);
+void kirkwood_xor1_init(void);
 
 extern struct sys_timer kirkwood_timer;
 
diff --git a/arch/arm/mach-kirkwood/db88f6281-bp-setup.c b/arch/arm/mach-kirkwood/db88f6281-bp-setup.c
index d5c482c628e3..610fb24d8ae2 100644
--- a/arch/arm/mach-kirkwood/db88f6281-bp-setup.c
+++ b/arch/arm/mach-kirkwood/db88f6281-bp-setup.c
@@ -21,7 +21,7 @@
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/pci.h>
-#include <asm/arch/kirkwood.h>
+#include <mach/kirkwood.h>
 #include "common.h"
 
 static struct mv643xx_eth_platform_data db88f6281_ge00_data = {
diff --git a/arch/arm/mach-kirkwood/include/mach/debug-macro.S b/arch/arm/mach-kirkwood/include/mach/debug-macro.S
new file mode 100644
index 000000000000..c0cc5b5c82ac
--- /dev/null
+++ b/arch/arm/mach-kirkwood/include/mach/debug-macro.S
@@ -0,0 +1,20 @@
+/*
+ * arch/arm/mach-kirkwood/include/mach/debug-macro.S
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <mach/kirkwood.h>
+
+	.macro	addruart,rx
+	mrc	p15, 0, \rx, c1, c0
+	tst	\rx, #1					@ MMU enabled?
+	ldreq	\rx, =KIRKWOOD_REGS_PHYS_BASE
+	ldrne	\rx, =KIRKWOOD_REGS_VIRT_BASE
+	orr	\rx, \rx, #0x00012000
+	.endm
+
+#define UART_SHIFT	2
+#include <asm/hardware/debug-8250.S>
diff --git a/include/asm-arm/arch-kirkwood/dma.h b/arch/arm/mach-kirkwood/include/mach/dma.h
index 40a8c178f10d..40a8c178f10d 100644
--- a/include/asm-arm/arch-kirkwood/dma.h
+++ b/arch/arm/mach-kirkwood/include/mach/dma.h
diff --git a/arch/arm/mach-kirkwood/include/mach/entry-macro.S b/arch/arm/mach-kirkwood/include/mach/entry-macro.S
new file mode 100644
index 000000000000..83e0cba77b36
--- /dev/null
+++ b/arch/arm/mach-kirkwood/include/mach/entry-macro.S
@@ -0,0 +1,40 @@
+/*
+ * arch/arm/mach-kirkwood/include/mach/entry-macro.S
+ *
+ * Low-level IRQ helper macros for Marvell Kirkwood platforms
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <mach/kirkwood.h>
+
+	.macro  disable_fiq
+	.endm
+
+	.macro  arch_ret_to_user, tmp1, tmp2
+	.endm
+
+	.macro  get_irqnr_preamble, base, tmp
+	ldr	\base, =IRQ_VIRT_BASE
+	.endm
+
+	.macro  get_irqnr_and_base, irqnr, irqstat, base, tmp
+	@ check low interrupts
+	ldr	\irqstat, [\base, #IRQ_CAUSE_LOW_OFF]
+	ldr	\tmp, [\base, #IRQ_MASK_LOW_OFF]
+	mov	\irqnr, #31
+	ands	\irqstat, \irqstat, \tmp
+	bne	1001f
+
+	@ if no low interrupts set, check high interrupts
+	ldr	\irqstat, [\base, #IRQ_CAUSE_HIGH_OFF]
+	ldr	\tmp, [\base, #IRQ_MASK_HIGH_OFF]
+	mov	\irqnr, #63
+	ands	\irqstat, \irqstat, \tmp
+
+	@ find first active interrupt source
+1001:	clzne	\irqstat, \irqstat
+	subne	\irqnr, \irqnr, \irqstat
+	.endm
diff --git a/arch/arm/mach-kirkwood/include/mach/hardware.h b/arch/arm/mach-kirkwood/include/mach/hardware.h
new file mode 100644
index 000000000000..cde85283f7d3
--- /dev/null
+++ b/arch/arm/mach-kirkwood/include/mach/hardware.h
@@ -0,0 +1,21 @@
+/*
+ * arch/arm/mach-kirkwood/include/mach/hardware.h
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_HARDWARE_H
+#define __ASM_ARCH_HARDWARE_H
+
+#include "kirkwood.h"
+
+#define pcibios_assign_all_busses()	1
+
+#define PCIBIOS_MIN_IO			0x00001000
+#define PCIBIOS_MIN_MEM			0x01000000
+#define PCIMEM_BASE			KIRKWOOD_PCIE_MEM_PHYS_BASE /* mem base for VGA */
+
+
+#endif
diff --git a/arch/arm/mach-kirkwood/include/mach/io.h b/arch/arm/mach-kirkwood/include/mach/io.h
new file mode 100644
index 000000000000..be07be0ef522
--- /dev/null
+++ b/arch/arm/mach-kirkwood/include/mach/io.h
@@ -0,0 +1,26 @@
+/*
+ * arch/arm/mach-kirkwood/include/mach/io.h
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __ASM_ARCH_IO_H
+#define __ASM_ARCH_IO_H
+
+#include "kirkwood.h"
+
+#define IO_SPACE_LIMIT		0xffffffff
+
+static inline void __iomem *__io(unsigned long addr)
+{
+	return (void __iomem *)((addr - KIRKWOOD_PCIE_IO_PHYS_BASE)
+					+ KIRKWOOD_PCIE_IO_VIRT_BASE);
+}
+
+#define __io(a)			__io(a)
+#define __mem_pci(a)		(a)
+
+
+#endif
diff --git a/arch/arm/mach-kirkwood/include/mach/irqs.h b/arch/arm/mach-kirkwood/include/mach/irqs.h
new file mode 100644
index 000000000000..6fd05838c72d
--- /dev/null
+++ b/arch/arm/mach-kirkwood/include/mach/irqs.h
@@ -0,0 +1,63 @@
+/*
+ * arch/arm/mach-kirkwood/include/mach/irqs.h
+ *
+ * IRQ definitions for Marvell Kirkwood SoCs
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __ASM_ARCH_IRQS_H
+#define __ASM_ARCH_IRQS_H
+
+#include "kirkwood.h"	/* need GPIO_MAX */
+
+/*
+ * Low Interrupt Controller
+ */
+#define IRQ_KIRKWOOD_HIGH_SUM	0
+#define IRQ_KIRKWOOD_BRIDGE	1
+#define IRQ_KIRKWOOD_HOST2CPU	2
+#define IRQ_KIRKWOOD_CPU2HOST	3
+#define IRQ_KIRKWOOD_XOR_00	5
+#define IRQ_KIRKWOOD_XOR_01	6
+#define IRQ_KIRKWOOD_XOR_10	7
+#define IRQ_KIRKWOOD_XOR_11	8
+#define IRQ_KIRKWOOD_PCIE	9
+#define IRQ_KIRKWOOD_GE00_SUM	11
+#define IRQ_KIRKWOOD_GE01_SUM	15
+#define IRQ_KIRKWOOD_USB	19
+#define IRQ_KIRKWOOD_SATA	21
+#define IRQ_KIRKWOOD_CRYPTO	22
+#define IRQ_KIRKWOOD_SPI	23
+#define IRQ_KIRKWOOD_I2S	24
+#define IRQ_KIRKWOOD_TS_0	26
+#define IRQ_KIRKWOOD_SDIO	28
+#define IRQ_KIRKWOOD_TWSI	29
+#define IRQ_KIRKWOOD_AVB	30
+#define IRQ_KIRKWOOD_TDMI	31
+
+/*
+ * High Interrupt Controller
+ */
+#define IRQ_KIRKWOOD_UART_0	33
+#define IRQ_KIRKWOOD_UART_1	34
+#define IRQ_KIRKWOOD_GPIO_LOW_0_7	35
+#define IRQ_KIRKWOOD_GPIO_LOW_8_15	36
+#define IRQ_KIRKWOOD_GPIO_LOW_16_23	37
+#define IRQ_KIRKWOOD_GPIO_LOW_24_31	38
+#define IRQ_KIRKWOOD_GPIO_HIGH_0_7	39
+#define IRQ_KIRKWOOD_GPIO_HIGH_8_15	40
+#define IRQ_KIRKWOOD_GPIO_HIGH_16_23	41
+
+/*
+ * KIRKWOOD General Purpose Pins
+ */
+#define IRQ_KIRKWOOD_GPIO_START	64
+#define NR_GPIO_IRQS		GPIO_MAX
+
+#define NR_IRQS			(IRQ_KIRKWOOD_GPIO_START + NR_GPIO_IRQS)
+
+
+#endif
diff --git a/include/asm-arm/arch-kirkwood/kirkwood.h b/arch/arm/mach-kirkwood/include/mach/kirkwood.h
index bb31b315c350..5c69992295e8 100644
--- a/include/asm-arm/arch-kirkwood/kirkwood.h
+++ b/arch/arm/mach-kirkwood/include/mach/kirkwood.h
@@ -1,5 +1,5 @@
 /*
- * include/asm-arm/arch-kirkwood/kirkwood.h
+ * arch/arm/mach-kirkwood/include/mach/kirkwood.h
  *
  * Generic definitions for Marvell Kirkwood SoC flavors:
  *  88F6180, 88F6192 and 88F6281.
@@ -88,6 +88,15 @@
 
 #define USB_PHYS_BASE		(KIRKWOOD_REGS_PHYS_BASE | 0x50000)
 
+#define XOR0_PHYS_BASE		(KIRKWOOD_REGS_PHYS_BASE | 0x60800)
+#define XOR0_VIRT_BASE		(KIRKWOOD_REGS_VIRT_BASE | 0x60800)
+#define XOR1_PHYS_BASE		(KIRKWOOD_REGS_PHYS_BASE | 0x60900)
+#define XOR1_VIRT_BASE		(KIRKWOOD_REGS_VIRT_BASE | 0x60900)
+#define XOR0_HIGH_PHYS_BASE	(KIRKWOOD_REGS_PHYS_BASE | 0x60A00)
+#define XOR0_HIGH_VIRT_BASE	(KIRKWOOD_REGS_VIRT_BASE | 0x60A00)
+#define XOR1_HIGH_PHYS_BASE	(KIRKWOOD_REGS_PHYS_BASE | 0x60B00)
+#define XOR1_HIGH_VIRT_BASE	(KIRKWOOD_REGS_VIRT_BASE | 0x60B00)
+
 #define GE00_PHYS_BASE		(KIRKWOOD_REGS_PHYS_BASE | 0x70000)
 #define GE01_PHYS_BASE		(KIRKWOOD_REGS_PHYS_BASE | 0x74000)
 
diff --git a/arch/arm/mach-kirkwood/include/mach/memory.h b/arch/arm/mach-kirkwood/include/mach/memory.h
new file mode 100644
index 000000000000..b5fb34bdccd5
--- /dev/null
+++ b/arch/arm/mach-kirkwood/include/mach/memory.h
@@ -0,0 +1,14 @@
+/*
+ * arch/arm/mach-kirkwood/include/mach/memory.h
+ */
+
+#ifndef __ASM_ARCH_MEMORY_H
+#define __ASM_ARCH_MEMORY_H
+
+#define PHYS_OFFSET		UL(0x00000000)
+
+#define __virt_to_bus(x)	__virt_to_phys(x)
+#define __bus_to_virt(x)	__phys_to_virt(x)
+
+
+#endif
diff --git a/arch/arm/mach-kirkwood/include/mach/system.h b/arch/arm/mach-kirkwood/include/mach/system.h
new file mode 100644
index 000000000000..8510f6cfdabf
--- /dev/null
+++ b/arch/arm/mach-kirkwood/include/mach/system.h
@@ -0,0 +1,37 @@
+/*
+ * arch/arm/mach-kirkwood/include/mach/system.h
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __ASM_ARCH_SYSTEM_H
+#define __ASM_ARCH_SYSTEM_H
+
+#include <mach/hardware.h>
+#include <mach/kirkwood.h>
+
+static inline void arch_idle(void)
+{
+	cpu_do_idle();
+}
+
+static inline void arch_reset(char mode)
+{
+	/*
+	 * Enable soft reset to assert RSTOUTn.
+	 */
+	writel(SOFT_RESET_OUT_EN, RSTOUTn_MASK);
+
+	/*
+	 * Assert soft reset.
+	 */
+	writel(SOFT_RESET, SYSTEM_SOFT_RESET);
+
+	while (1)
+		;
+}
+
+
+#endif
diff --git a/arch/arm/mach-kirkwood/include/mach/timex.h b/arch/arm/mach-kirkwood/include/mach/timex.h
new file mode 100644
index 000000000000..f77ef4a32c5f
--- /dev/null
+++ b/arch/arm/mach-kirkwood/include/mach/timex.h
@@ -0,0 +1,11 @@
+/*
+ * arch/arm/mach-kirkwood/include/mach/timex.h
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#define CLOCK_TICK_RATE		(100 * HZ)
+
+#define KIRKWOOD_TCLK		166666667
diff --git a/arch/arm/mach-kirkwood/include/mach/uncompress.h b/arch/arm/mach-kirkwood/include/mach/uncompress.h
new file mode 100644
index 000000000000..75d5497df3a8
--- /dev/null
+++ b/arch/arm/mach-kirkwood/include/mach/uncompress.h
@@ -0,0 +1,47 @@
+/*
+ * arch/arm/mach-kirkwood/include/mach/uncompress.h
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/serial_reg.h>
+#include <mach/kirkwood.h>
+
+#define SERIAL_BASE	((unsigned char *)UART0_PHYS_BASE)
+
+static void putc(const char c)
+{
+	unsigned char *base = SERIAL_BASE;
+	int i;
+
+	for (i = 0; i < 0x1000; i++) {
+		if (base[UART_LSR << 2] & UART_LSR_THRE)
+			break;
+		barrier();
+	}
+
+	base[UART_TX << 2] = c;
+}
+
+static void flush(void)
+{
+	unsigned char *base = SERIAL_BASE;
+	unsigned char mask;
+	int i;
+
+	mask = UART_LSR_TEMT | UART_LSR_THRE;
+
+	for (i = 0; i < 0x1000; i++) {
+		if ((base[UART_LSR << 2] & mask) == mask)
+			break;
+		barrier();
+	}
+}
+
+/*
+ * nothing to do
+ */
+#define arch_decomp_setup()
+#define arch_decomp_wdog()
diff --git a/arch/arm/mach-kirkwood/include/mach/vmalloc.h b/arch/arm/mach-kirkwood/include/mach/vmalloc.h
new file mode 100644
index 000000000000..8f48260dcdad
--- /dev/null
+++ b/arch/arm/mach-kirkwood/include/mach/vmalloc.h
@@ -0,0 +1,5 @@
+/*
+ * arch/arm/mach-kirkwood/include/mach/vmalloc.h
+ */
+
+#define VMALLOC_END	0xfe800000
diff --git a/arch/arm/mach-kirkwood/irq.c b/arch/arm/mach-kirkwood/irq.c
index 302bb2cf6669..5790643ffe07 100644
--- a/arch/arm/mach-kirkwood/irq.c
+++ b/arch/arm/mach-kirkwood/irq.c
@@ -12,7 +12,7 @@
 #include <linux/init.h>
 #include <linux/irq.h>
 #include <linux/io.h>
-#include <asm/plat-orion/irq.h>
+#include <plat/irq.h>
 #include "common.h"
 
 void __init kirkwood_init_irq(void)
diff --git a/arch/arm/mach-kirkwood/pcie.c b/arch/arm/mach-kirkwood/pcie.c
index 8282d0ff84bf..2195fa31f6b7 100644
--- a/arch/arm/mach-kirkwood/pcie.c
+++ b/arch/arm/mach-kirkwood/pcie.c
@@ -12,7 +12,7 @@
 #include <linux/pci.h>
 #include <linux/mbus.h>
 #include <asm/mach/pci.h>
-#include <asm/plat-orion/pcie.h>
+#include <plat/pcie.h>
 #include "common.h"
 
 
diff --git a/arch/arm/mach-kirkwood/rd88f6192-nas-setup.c b/arch/arm/mach-kirkwood/rd88f6192-nas-setup.c
index 6cf642c504d3..a3012d445971 100644
--- a/arch/arm/mach-kirkwood/rd88f6192-nas-setup.c
+++ b/arch/arm/mach-kirkwood/rd88f6192-nas-setup.c
@@ -18,10 +18,13 @@
 #include <linux/timer.h>
 #include <linux/ata_platform.h>
 #include <linux/mv643xx_eth.h>
+#include <linux/spi/flash.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/orion_spi.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/pci.h>
-#include <asm/arch/kirkwood.h>
+#include <mach/kirkwood.h>
 #include "common.h"
 
 #define RD88F6192_GPIO_USB_VBUS		10
@@ -34,6 +37,21 @@ static struct mv_sata_platform_data rd88f6192_sata_data = {
 	.n_ports	= 2,
 };
 
+static const struct flash_platform_data rd88F6192_spi_slave_data = {
+	.type		= "m25p128",
+};
+
+static struct spi_board_info __initdata rd88F6192_spi_slave_info[] = {
+	{
+		.modalias	= "m25p80",
+		.platform_data	= &rd88F6192_spi_slave_data,
+		.irq		= -1,
+		.max_speed_hz	= 20000000,
+		.bus_num	= 0,
+		.chip_select	= 0,
+	},
+};
+
 static void __init rd88f6192_init(void)
 {
 	/*
@@ -45,7 +63,12 @@ static void __init rd88f6192_init(void)
 	kirkwood_ge00_init(&rd88f6192_ge00_data);
 	kirkwood_rtc_init();
 	kirkwood_sata_init(&rd88f6192_sata_data);
+	spi_register_board_info(rd88F6192_spi_slave_info,
+				ARRAY_SIZE(rd88F6192_spi_slave_info));
+	kirkwood_spi_init();
 	kirkwood_uart0_init();
+	kirkwood_xor0_init();
+	kirkwood_xor1_init();
 }
 
 static int __init rd88f6192_pci_init(void)
diff --git a/arch/arm/mach-kirkwood/rd88f6281-setup.c b/arch/arm/mach-kirkwood/rd88f6281-setup.c
index e1f8de2c74a2..d96487a0f18b 100644
--- a/arch/arm/mach-kirkwood/rd88f6281-setup.c
+++ b/arch/arm/mach-kirkwood/rd88f6281-setup.c
@@ -18,11 +18,12 @@
 #include <linux/timer.h>
 #include <linux/ata_platform.h>
 #include <linux/mv643xx_eth.h>
+#include <linux/ethtool.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/pci.h>
-#include <asm/arch/kirkwood.h>
-#include <asm/plat-orion/orion_nand.h>
+#include <mach/kirkwood.h>
+#include <plat/orion_nand.h>
 #include "common.h"
 
 static struct mtd_partition rd88f6281_nand_parts[] = {
@@ -69,6 +70,8 @@ static struct platform_device rd88f6281_nand_flash = {
 
 static struct mv643xx_eth_platform_data rd88f6281_ge00_data = {
 	.phy_addr	= -1,
+	.speed		= SPEED_1000,
+	.duplex		= DUPLEX_FULL,
 };
 
 static struct mv_sata_platform_data rd88f6281_sata_data = {
diff --git a/arch/arm/mach-ks8695/board-micrel.c b/arch/arm/mach-ks8695/board-micrel.c
index 05ac2bd04020..0468e93b7d3b 100644
--- a/arch/arm/mach-ks8695/board-micrel.c
+++ b/arch/arm/mach-ks8695/board-micrel.c
@@ -18,7 +18,7 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
-#include <asm/arch/devices.h>
+#include <mach/devices.h>
 
 #include "generic.h"
 
diff --git a/arch/arm/mach-ks8695/cpu.c b/arch/arm/mach-ks8695/cpu.c
index 407d255e42bf..c6c08e800233 100644
--- a/arch/arm/mach-ks8695/cpu.c
+++ b/arch/arm/mach-ks8695/cpu.c
@@ -25,13 +25,13 @@
 #include <linux/module.h>
 #include <linux/init.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 
-#include <asm/arch/regs-sys.h>
-#include <asm/arch/regs-misc.h>
+#include <mach/regs-sys.h>
+#include <mach/regs-misc.h>
 
 
 static struct __initdata map_desc ks8695_io_desc[] = {
diff --git a/arch/arm/mach-ks8695/devices.c b/arch/arm/mach-ks8695/devices.c
index 3db2ec61d06f..4bd251482c8f 100644
--- a/arch/arm/mach-ks8695/devices.c
+++ b/arch/arm/mach-ks8695/devices.c
@@ -22,9 +22,9 @@
 
 #include <linux/platform_device.h>
 
-#include <asm/arch/regs-wan.h>
-#include <asm/arch/regs-lan.h>
-#include <asm/arch/regs-hpna.h>
+#include <mach/regs-wan.h>
+#include <mach/regs-lan.h>
+#include <mach/regs-hpna.h>
 
 
 /* --------------------------------------------------------------------
diff --git a/arch/arm/mach-ks8695/gpio.c b/arch/arm/mach-ks8695/gpio.c
index 5e46191c0af9..3624e65cd89b 100644
--- a/arch/arm/mach-ks8695/gpio.c
+++ b/arch/arm/mach-ks8695/gpio.c
@@ -25,11 +25,11 @@
 #include <linux/module.h>
 
 #include <asm/io.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/mach/irq.h>
 
-#include <asm/arch/regs-gpio.h>
-#include <asm/arch/gpio.h>
+#include <mach/regs-gpio.h>
+#include <mach/gpio.h>
 
 /*
  * Configure a GPIO line for either GPIO function, or its internal
diff --git a/arch/arm/mach-ks8695/include/mach/debug-macro.S b/arch/arm/mach-ks8695/include/mach/debug-macro.S
new file mode 100644
index 000000000000..3782c3559497
--- /dev/null
+++ b/arch/arm/mach-ks8695/include/mach/debug-macro.S
@@ -0,0 +1,38 @@
+/*
+ * arch/arm/mach-ks8695/include/mach/debug-macro.S
+ *
+ * Copyright (C) 2006 Ben Dooks <ben@simtec.co.uk>
+ * Copyright (C) 2006 Simtec Electronics
+ *
+ * KS8695 - Debug macros
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <mach/hardware.h>
+#include <mach/regs-uart.h>
+
+	.macro	addruart, rx
+		mrc	p15, 0, \rx, c1, c0
+		tst	\rx, #1				@ MMU enabled?
+		ldreq	\rx, =KS8695_UART_PA		@ physical base address
+		ldrne	\rx, =KS8695_UART_VA		@ virtual base address
+	.endm
+
+	.macro	senduart, rd, rx
+		str	\rd, [\rx, #KS8695_URTH]	@ Write to Transmit Holding Register
+	.endm
+
+	.macro	busyuart, rd, rx
+1001:		ldr	\rd, [\rx, #KS8695_URLS]	@ Read Line Status Register
+		tst	\rd, #URLS_URTE			@ Holding & Shift registers empty?
+		beq	1001b
+	.endm
+
+	.macro	waituart, rd, rx
+1001:		ldr	\rd, [\rx, #KS8695_URLS]	@ Read Line Status Register
+		tst	\rd, #URLS_URTHRE		@ Holding Register empty?
+		beq	1001b
+	.endm
diff --git a/include/asm-arm/arch-ks8695/devices.h b/arch/arm/mach-ks8695/include/mach/devices.h
index 7ad2c656e162..2744fecb429c 100644
--- a/include/asm-arm/arch-ks8695/devices.h
+++ b/arch/arm/mach-ks8695/include/mach/devices.h
@@ -1,5 +1,5 @@
 /*
- * include/asm-arm/arch-ks8695/devices.h
+ * arch/arm/mach-ks8695/include/mach/devices.h
  *
  * Copyright (C) 2006 Andrew Victor
  *
diff --git a/arch/arm/mach-ks8695/include/mach/dma.h b/arch/arm/mach-ks8695/include/mach/dma.h
new file mode 100644
index 000000000000..561206280089
--- /dev/null
+++ b/arch/arm/mach-ks8695/include/mach/dma.h
@@ -0,0 +1,17 @@
+/*
+ * arch/arm/mach-ks8695/include/mach/dma.h
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
diff --git a/arch/arm/mach-ks8695/include/mach/entry-macro.S b/arch/arm/mach-ks8695/include/mach/entry-macro.S
new file mode 100644
index 000000000000..b4fe0c11c6ce
--- /dev/null
+++ b/arch/arm/mach-ks8695/include/mach/entry-macro.S
@@ -0,0 +1,53 @@
+/*
+ * arch/arm/mach-ks8695/include/mach/entry-macro.S
+ *
+ * Copyright (C) 2006 Ben Dooks <ben@simtec.co.uk>
+ * Copyright (C) 2006 Simtec Electronics
+ *
+ * Low-level IRQ helper macros for KS8695
+ *
+ * This file is licensed under  the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+*/
+
+#include <mach/hardware.h>
+#include <mach/regs-irq.h>
+
+	.macro	disable_fiq
+	.endm
+
+	.macro  get_irqnr_preamble, base, tmp
+		ldr	\base, =KS8695_IRQ_VA			@ Base address of interrupt controller
+	.endm
+
+	.macro  arch_ret_to_user, tmp1, tmp2
+	.endm
+
+	.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
+		ldr	\irqstat, [\base, #KS8695_INTMS]	@ Mask Status register
+
+		teq	\irqstat, #0
+		beq	1001f
+
+		mov	\irqnr, #0
+
+		tst	\irqstat, #0xff
+		moveq	\irqstat, \irqstat, lsr #8
+		addeq	\irqnr, \irqnr, #8
+		tsteq	\irqstat, #0xff
+		moveq	\irqstat, \irqstat, lsr #8
+		addeq	\irqnr, \irqnr, #8
+		tsteq	\irqstat, #0xff
+		moveq	\irqstat, \irqstat, lsr #8
+		addeq	\irqnr, \irqnr, #8
+		tst	\irqstat, #0x0f
+		moveq	\irqstat, \irqstat, lsr #4
+		addeq	\irqnr, \irqnr, #4
+		tst	\irqstat, #0x03
+		moveq	\irqstat, \irqstat, lsr #2
+		addeq	\irqnr, \irqnr, #2
+		tst	\irqstat, #0x01
+		addeqs	\irqnr, \irqnr, #1
+1001:
+	.endm
diff --git a/arch/arm/mach-ks8695/include/mach/gpio.h b/arch/arm/mach-ks8695/include/mach/gpio.h
new file mode 100644
index 000000000000..73c84168761c
--- /dev/null
+++ b/arch/arm/mach-ks8695/include/mach/gpio.h
@@ -0,0 +1,79 @@
+/*
+ * arch/arm/mach-ks8695/include/mach/gpio.h
+ *
+ * Copyright (C) 2006 Andrew Victor
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_GPIO_H_
+#define __ASM_ARCH_GPIO_H_
+
+#define KS8695_GPIO_0		0
+#define KS8695_GPIO_1		1
+#define KS8695_GPIO_2		2
+#define KS8695_GPIO_3		3
+#define KS8695_GPIO_4		4
+#define KS8695_GPIO_5		5
+#define KS8695_GPIO_6		6
+#define KS8695_GPIO_7		7
+#define KS8695_GPIO_8		8
+#define KS8695_GPIO_9		9
+#define KS8695_GPIO_10		10
+#define KS8695_GPIO_11		11
+#define KS8695_GPIO_12		12
+#define KS8695_GPIO_13		13
+#define KS8695_GPIO_14		14
+#define KS8695_GPIO_15		15
+
+
+/*
+ * Configure GPIO pin as external interrupt source.
+ */
+int __init_or_module ks8695_gpio_interrupt(unsigned int pin, unsigned int type);
+
+/*
+ * Configure the GPIO line as an input.
+ */
+int __init_or_module gpio_direction_input(unsigned int pin);
+
+/*
+ * Configure the GPIO line as an output, with default state.
+ */
+int __init_or_module gpio_direction_output(unsigned int pin, unsigned int state);
+
+/*
+ * Set the state of an output GPIO line.
+ */
+void gpio_set_value(unsigned int pin, unsigned int state);
+
+/*
+ * Read the state of a GPIO line.
+ */
+int gpio_get_value(unsigned int pin);
+
+/*
+ * Map GPIO line to IRQ number.
+ */
+int gpio_to_irq(unsigned int pin);
+
+/*
+ * Map IRQ number to GPIO line.
+ */
+int irq_to_gpio(unsigned int irq);
+
+
+#include <asm-generic/gpio.h>
+
+static inline int gpio_request(unsigned int pin, const char *label)
+{
+	return 0;
+}
+
+static inline void gpio_free(unsigned int pin)
+{
+}
+
+#endif
diff --git a/arch/arm/mach-ks8695/include/mach/hardware.h b/arch/arm/mach-ks8695/include/mach/hardware.h
new file mode 100644
index 000000000000..1d640d075b7e
--- /dev/null
+++ b/arch/arm/mach-ks8695/include/mach/hardware.h
@@ -0,0 +1,49 @@
+/*
+ * arch/arm/mach-ks8695/include/mach/hardware.h
+ *
+ * Copyright (C) 2006 Ben Dooks <ben@simtec.co.uk>
+ * Copyright (C) 2006 Simtec Electronics
+ *
+ * KS8695 - Memory Map definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_HARDWARE_H
+#define __ASM_ARCH_HARDWARE_H
+
+#include <asm/sizes.h>
+
+/*
+ * Physical RAM address.
+ */
+#define KS8695_SDRAM_PA		0x00000000
+
+
+/*
+ * We map an entire MiB with the System Configuration Registers in even
+ * though only 64KiB is needed. This makes it easier for use with the
+ * head debug code as the initial MMU setup only deals in L1 sections.
+ */
+#define KS8695_IO_PA		0x03F00000
+#define KS8695_IO_VA		0xF0000000
+#define KS8695_IO_SIZE		SZ_1M
+
+#define KS8695_PCIMEM_PA	0x60000000
+#define KS8695_PCIMEM_SIZE	SZ_512M
+
+#define KS8695_PCIIO_PA		0x80000000
+#define KS8695_PCIIO_SIZE	SZ_64K
+
+
+/*
+ * PCI support
+ */
+#define pcibios_assign_all_busses()	1
+
+#define PCIBIOS_MIN_IO		0
+#define PCIBIOS_MIN_MEM		0
+
+#endif
diff --git a/arch/arm/mach-ks8695/include/mach/io.h b/arch/arm/mach-ks8695/include/mach/io.h
new file mode 100644
index 000000000000..f364f24ffe1e
--- /dev/null
+++ b/arch/arm/mach-ks8695/include/mach/io.h
@@ -0,0 +1,19 @@
+/*
+ * arch/arm/mach-ks8695/include/mach/io.h
+ *
+ * Copyright (C) 2006 Andrew Victor
+ *
+ * This file is licensed under  the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __ASM_ARCH_IO_H
+#define __ASM_ARCH_IO_H
+
+#define IO_SPACE_LIMIT		0xffffffff
+
+#define __io(a)			((void __iomem *)(a))
+#define __mem_pci(a)		(a)
+
+#endif
diff --git a/arch/arm/mach-ks8695/include/mach/irqs.h b/arch/arm/mach-ks8695/include/mach/irqs.h
new file mode 100644
index 000000000000..86fc9e6ce404
--- /dev/null
+++ b/arch/arm/mach-ks8695/include/mach/irqs.h
@@ -0,0 +1,54 @@
+/*
+ * arch/arm/mach-ks8695/include/mach/irqs.h
+ *
+ * Copyright (C) 2006 Simtec Electronics
+ *   Ben Dooks <ben@simtec.co.uk>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_IRQS_H
+#define __ASM_ARCH_IRQS_H
+
+
+#define NR_IRQS				32
+
+/*
+ * IRQ definitions
+ */
+#define KS8695_IRQ_COMM_RX		0
+#define KS8695_IRQ_COMM_TX		1
+#define KS8695_IRQ_EXTERN0		2
+#define KS8695_IRQ_EXTERN1		3
+#define KS8695_IRQ_EXTERN2		4
+#define KS8695_IRQ_EXTERN3		5
+#define KS8695_IRQ_TIMER0		6
+#define KS8695_IRQ_TIMER1		7
+#define KS8695_IRQ_UART_TX		8
+#define KS8695_IRQ_UART_RX		9
+#define KS8695_IRQ_UART_LINE_STATUS	10
+#define KS8695_IRQ_UART_MODEM_STATUS	11
+#define KS8695_IRQ_LAN_RX_STOP		12
+#define KS8695_IRQ_LAN_TX_STOP		13
+#define KS8695_IRQ_LAN_RX_BUF		14
+#define KS8695_IRQ_LAN_TX_BUF		15
+#define KS8695_IRQ_LAN_RX_STATUS	16
+#define KS8695_IRQ_LAN_TX_STATUS	17
+#define KS8695_IRQ_HPNA_RX_STOP		18
+#define KS8695_IRQ_HPNA_TX_STOP		19
+#define KS8695_IRQ_HPNA_RX_BUF		20
+#define KS8695_IRQ_HPNA_TX_BUF		21
+#define KS8695_IRQ_HPNA_RX_STATUS	22
+#define KS8695_IRQ_HPNA_TX_STATUS	23
+#define KS8695_IRQ_BUS_ERROR		24
+#define KS8695_IRQ_WAN_RX_STOP		25
+#define KS8695_IRQ_WAN_TX_STOP		26
+#define KS8695_IRQ_WAN_RX_BUF		27
+#define KS8695_IRQ_WAN_TX_BUF		28
+#define KS8695_IRQ_WAN_RX_STATUS	29
+#define KS8695_IRQ_WAN_TX_STATUS	30
+#define KS8695_IRQ_WAN_LINK		31
+
+#endif
diff --git a/arch/arm/mach-ks8695/include/mach/memory.h b/arch/arm/mach-ks8695/include/mach/memory.h
new file mode 100644
index 000000000000..dadbe66cb75c
--- /dev/null
+++ b/arch/arm/mach-ks8695/include/mach/memory.h
@@ -0,0 +1,49 @@
+/*
+ * arch/arm/mach-ks8695/include/mach/memory.h
+ *
+ * Copyright (C) 2006 Andrew Victor
+ *
+ * KS8695 Memory definitions
+ *
+ * This file is licensed under  the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __ASM_ARCH_MEMORY_H
+#define __ASM_ARCH_MEMORY_H
+
+#include <mach/hardware.h>
+
+/*
+ * Physical SRAM offset.
+ */
+#define PHYS_OFFSET		KS8695_SDRAM_PA
+
+#ifndef __ASSEMBLY__
+
+#ifdef CONFIG_PCI
+
+/* PCI mappings */
+#define __virt_to_bus(x)	((x) - PAGE_OFFSET + KS8695_PCIMEM_PA)
+#define __bus_to_virt(x)	((x) - KS8695_PCIMEM_PA + PAGE_OFFSET)
+
+/* Platform-bus mapping */
+extern struct bus_type platform_bus_type;
+#define is_lbus_device(dev)		(dev && dev->bus == &platform_bus_type)
+#define __arch_dma_to_virt(dev, x)	({ is_lbus_device(dev) ? \
+					__phys_to_virt(x) : __bus_to_virt(x); })
+#define __arch_virt_to_dma(dev, x)	({ is_lbus_device(dev) ? \
+					(dma_addr_t)__virt_to_phys(x) : (dma_addr_t)__virt_to_bus(x); })
+#define __arch_page_to_dma(dev, x)	__arch_virt_to_dma(dev, page_address(x))
+
+#else
+
+#define __virt_to_bus(x)	__virt_to_phys(x)
+#define __bus_to_virt(x)	__phys_to_virt(x)
+
+#endif
+
+#endif
+
+#endif
diff --git a/arch/arm/mach-ks8695/include/mach/regs-gpio.h b/arch/arm/mach-ks8695/include/mach/regs-gpio.h
new file mode 100644
index 000000000000..0df6fe61d1ce
--- /dev/null
+++ b/arch/arm/mach-ks8695/include/mach/regs-gpio.h
@@ -0,0 +1,55 @@
+/*
+ * arch/arm/mach-ks8695/include/mach/regs-gpio.h
+ *
+ * Copyright (C) 2007 Andrew Victor
+ *
+ * KS8695 - GPIO control registers and bit definitions.
+ *
+ * This file is licensed under  the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef KS8695_GPIO_H
+#define KS8695_GPIO_H
+
+#define KS8695_GPIO_OFFSET	(0xF0000 + 0xE600)
+#define KS8695_GPIO_VA		(KS8695_IO_VA + KS8695_GPIO_OFFSET)
+#define KS8695_GPIO_PA		(KS8695_IO_PA + KS8695_GPIO_OFFSET)
+
+
+#define KS8695_IOPM		(0x00)		/* I/O Port Mode Register */
+#define KS8695_IOPC		(0x04)		/* I/O Port Control Register */
+#define KS8695_IOPD		(0x08)		/* I/O Port Data Register */
+
+
+/* Port Mode Register */
+#define IOPM_(x)		(1 << (x))	/* Mode for GPIO Pin x */
+
+/* Port Control Register */
+#define IOPC_IOTIM1EN		(1 << 17)	/* GPIO Pin for Timer1 Enable */
+#define IOPC_IOTIM0EN		(1 << 16)	/* GPIO Pin for Timer0 Enable */
+#define IOPC_IOEINT3EN		(1 << 15)	/* GPIO Pin for External/Soft Interrupt 3 Enable */
+#define IOPC_IOEINT3TM		(7 << 12)	/* GPIO Pin for External/Soft Interrupt 3 Trigger Mode */
+#define IOPC_IOEINT3_MODE(x)	((x) << 12)
+#define IOPC_IOEINT2EN		(1 << 11)	/* GPIO Pin for External/Soft Interrupt 2 Enable */
+#define IOPC_IOEINT2TM		(7 << 8)	/* GPIO Pin for External/Soft Interrupt 2 Trigger Mode */
+#define IOPC_IOEINT2_MODE(x)	((x) << 8)
+#define IOPC_IOEINT1EN		(1 << 7)	/* GPIO Pin for External/Soft Interrupt 1 Enable */
+#define IOPC_IOEINT1TM		(7 << 4)	/* GPIO Pin for External/Soft Interrupt 1 Trigger Mode */
+#define IOPC_IOEINT1_MODE(x)	((x) << 4)
+#define IOPC_IOEINT0EN		(1 << 3)	/* GPIO Pin for External/Soft Interrupt 0 Enable */
+#define IOPC_IOEINT0TM		(7 << 0)	/* GPIO Pin for External/Soft Interrupt 0 Trigger Mode */
+#define IOPC_IOEINT0_MODE(x)	((x) << 0)
+
+ /* Trigger Modes */
+#define IOPC_TM_LOW		(0)		/* Level Detection (Active Low) */
+#define IOPC_TM_HIGH		(1)		/* Level Detection (Active High) */
+#define IOPC_TM_RISING		(2)		/* Rising Edge Detection */
+#define IOPC_TM_FALLING		(4)		/* Falling Edge Detection */
+#define IOPC_TM_EDGE		(6)		/* Both Edge Detection */
+
+/* Port Data Register */
+#define IOPD_(x)		(1 << (x))	/* Signal Level of GPIO Pin x */
+
+#endif
diff --git a/include/asm-arm/arch-ks8695/regs-hpna.h b/arch/arm/mach-ks8695/include/mach/regs-hpna.h
index 14091cdec103..815ce5c2e3b9 100644
--- a/include/asm-arm/arch-ks8695/regs-hpna.h
+++ b/arch/arm/mach-ks8695/include/mach/regs-hpna.h
@@ -1,5 +1,5 @@
 /*
- * include/asm-arm/arch-ks8695/regs-wan.h
+ * arch/arm/mach-ks8695/include/mach/regs-wan.h
  *
  * Copyright (C) 2006 Andrew Victor
  *
diff --git a/arch/arm/mach-ks8695/include/mach/regs-irq.h b/arch/arm/mach-ks8695/include/mach/regs-irq.h
new file mode 100644
index 000000000000..352b7e8704d5
--- /dev/null
+++ b/arch/arm/mach-ks8695/include/mach/regs-irq.h
@@ -0,0 +1,41 @@
+/*
+ * arch/arm/mach-ks8695/include/mach/regs-irq.h
+ *
+ * Copyright (C) 2006 Ben Dooks <ben@simtec.co.uk>
+ * Copyright (C) 2006 Simtec Electronics
+ *
+ * KS8695 - IRQ registers and bit definitions
+ *
+ * This file is licensed under  the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef KS8695_IRQ_H
+#define KS8695_IRQ_H
+
+#define KS8695_IRQ_OFFSET	(0xF0000 + 0xE200)
+#define KS8695_IRQ_VA		(KS8695_IO_VA + KS8695_IRQ_OFFSET)
+#define KS8695_IRQ_PA		(KS8695_IO_PA + KS8695_IRQ_OFFSET)
+
+
+/*
+ * Interrupt Controller registers
+ */
+#define KS8695_INTMC		(0x00)		/* Mode Control Register */
+#define KS8695_INTEN		(0x04)		/* Interrupt Enable Register */
+#define KS8695_INTST		(0x08)		/* Interrupt Status Register */
+#define KS8695_INTPW		(0x0c)		/* Interrupt Priority (WAN MAC) */
+#define KS8695_INTPH		(0x10)		/* Interrupt Priority (HPNA) [KS8695 only] */
+#define KS8695_INTPL		(0x14)		/* Interrupt Priority (LAN MAC) */
+#define KS8695_INTPT		(0x18)		/* Interrupt Priority (Timer) */
+#define KS8695_INTPU		(0x1c)		/* Interrupt Priority (UART) */
+#define KS8695_INTPE		(0x20)		/* Interrupt Priority (External Interrupt) */
+#define KS8695_INTPC		(0x24)		/* Interrupt Priority (Communications Channel) */
+#define KS8695_INTPBE		(0x28)		/* Interrupt Priority (Bus Error Response) */
+#define KS8695_INTMS		(0x2c)		/* Interrupt Mask Status Register */
+#define KS8695_INTHPF		(0x30)		/* Interrupt Pending Highest Priority (FIQ) */
+#define KS8695_INTHPI		(0x34)		/* Interrupt Pending Highest Priority (IRQ) */
+
+
+#endif
diff --git a/include/asm-arm/arch-ks8695/regs-lan.h b/arch/arm/mach-ks8695/include/mach/regs-lan.h
index a63bd61c64ed..9ef409901e76 100644
--- a/include/asm-arm/arch-ks8695/regs-lan.h
+++ b/arch/arm/mach-ks8695/include/mach/regs-lan.h
@@ -1,5 +1,5 @@
 /*
- * include/asm-arm/arch-ks8695/regs-lan.h
+ * arch/arm/mach-ks8695/include/mach/regs-lan.h
  *
  * Copyright (C) 2006 Andrew Victor
  *
diff --git a/arch/arm/mach-ks8695/include/mach/regs-mem.h b/arch/arm/mach-ks8695/include/mach/regs-mem.h
new file mode 100644
index 000000000000..55806bc68ce3
--- /dev/null
+++ b/arch/arm/mach-ks8695/include/mach/regs-mem.h
@@ -0,0 +1,89 @@
+/*
+ * arch/arm/mach-ks8695/include/mach/regs-mem.h
+ *
+ * Copyright (C) 2006 Andrew Victor
+ *
+ * KS8695 - Memory Controller registers and bit definitions
+ *
+ * This file is licensed under  the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef KS8695_MEM_H
+#define KS8695_MEM_H
+
+#define KS8695_MEM_OFFSET	(0xF0000 + 0x4000)
+#define KS8695_MEM_VA		(KS8695_IO_VA + KS8695_MEM_OFFSET)
+#define KS8695_MEM_PA		(KS8695_IO_PA + KS8695_MEM_OFFSET)
+
+
+/*
+ * Memory Controller Registers
+ */
+#define KS8695_EXTACON0		(0x00)		/* External I/O 0 Access Control */
+#define KS8695_EXTACON1		(0x04)		/* External I/O 1 Access Control */
+#define KS8695_EXTACON2		(0x08)		/* External I/O 2 Access Control */
+#define KS8695_ROMCON0		(0x10)		/* ROM/SRAM/Flash 1 Control Register */
+#define KS8695_ROMCON1		(0x14)		/* ROM/SRAM/Flash 2 Control Register */
+#define KS8695_ERGCON		(0x20)		/* External I/O and ROM/SRAM/Flash General Register */
+#define KS8695_SDCON0		(0x30)		/* SDRAM Control Register 0 */
+#define KS8695_SDCON1		(0x34)		/* SDRAM Control Register 1 */
+#define KS8695_SDGCON		(0x38)		/* SDRAM General Control */
+#define KS8695_SDBCON		(0x3c)		/* SDRAM Buffer Control */
+#define KS8695_REFTIM		(0x40)		/* SDRAM Refresh Timer */
+
+
+/* External I/O Access Control Registers */
+#define EXTACON_EBNPTR		(0x3ff << 22)		/* Last Address Pointer */
+#define EXTACON_EBBPTR		(0x3ff << 12)		/* Base Pointer */
+#define EXTACON_EBTACT		(7     <<  9)		/* Write Enable/Output Enable Active Time */
+#define EXTACON_EBTCOH		(7     <<  6)		/* Chip Select Hold Time */
+#define EXTACON_EBTACS		(7     <<  3)		/* Address Setup Time before ECSN */
+#define EXTACON_EBTCOS		(7     <<  0)		/* Chip Select Time before OEN */
+
+/* ROM/SRAM/Flash Control Register */
+#define ROMCON_RBNPTR		(0x3ff << 22)		/* Next Pointer */
+#define ROMCON_RBBPTR		(0x3ff << 12)		/* Base Pointer */
+#define ROMCON_RBTACC		(7     <<  4)		/* Access Cycle Time */
+#define ROMCON_RBTPA		(3     <<  2)		/* Page Address Access Time */
+#define ROMCON_PMC		(3     <<  0)		/* Page Mode Configuration */
+#define		PMC_NORMAL		(0 << 0)
+#define		PMC_4WORD		(1 << 0)
+#define		PMC_8WORD		(2 << 0)
+#define		PMC_16WORD		(3 << 0)
+
+/* External I/O and ROM/SRAM/Flash General Register */
+#define ERGCON_TMULT		(3 << 28)		/* Time Multiplier */
+#define ERGCON_DSX2		(3 << 20)		/* Data Width (External I/O Bank 2) */
+#define ERGCON_DSX1		(3 << 18)		/* Data Width (External I/O Bank 1) */
+#define ERGCON_DSX0		(3 << 16)		/* Data Width (External I/O Bank 0) */
+#define ERGCON_DSR1		(3 <<  2)		/* Data Width (ROM/SRAM/Flash Bank 1) */
+#define ERGCON_DSR0		(3 <<  0)		/* Data Width (ROM/SRAM/Flash Bank 0) */
+
+/* SDRAM Control Register */
+#define SDCON_DBNPTR		(0x3ff << 22)		/* Last Address Pointer */
+#define SDCON_DBBPTR		(0x3ff << 12)		/* Base Pointer */
+#define SDCON_DBCAB		(3     <<  8)		/* Column Address Bits */
+#define SDCON_DBBNUM		(1     <<  3)		/* Number of Banks */
+#define SDCON_DBDBW		(3     <<  1)		/* Data Bus Width */
+
+/* SDRAM General Control Register */
+#define SDGCON_SDTRC		(3 << 2)		/* RAS to CAS latency */
+#define SDGCON_SDCAS		(3 << 0)		/* CAS latency */
+
+/* SDRAM Buffer Control Register */
+#define SDBCON_SDESTA		(1 << 31)		/* SDRAM Engine Status */
+#define SDBCON_RBUFBDIS		(1 << 24)		/* Read Buffer Burst Enable */
+#define SDBCON_WFIFOEN		(1 << 23)		/* Write FIFO Enable */
+#define SDBCON_RBUFEN		(1 << 22)		/* Read Buffer Enable */
+#define SDBCON_FLUSHWFIFO	(1 << 21)		/* Flush Write FIFO */
+#define SDBCON_RBUFINV		(1 << 20)		/* Read Buffer Invalidate */
+#define SDBCON_SDINI		(3 << 16)		/* SDRAM Initialization Control */
+#define SDBCON_SDMODE		(0x3fff << 0)		/* SDRAM Mode Register Value Program */
+
+/* SDRAM Refresh Timer Register */
+#define REFTIM_REFTIM		(0xffff << 0)		/* Refresh Timer Value */
+
+
+#endif
diff --git a/include/asm-arm/arch-ks8695/regs-misc.h b/arch/arm/mach-ks8695/include/mach/regs-misc.h
index 632ca6601a94..2740c52494a0 100644
--- a/include/asm-arm/arch-ks8695/regs-misc.h
+++ b/arch/arm/mach-ks8695/include/mach/regs-misc.h
@@ -1,5 +1,5 @@
 /*
- * include/asm-arm/arch-ks8695/regs-misc.h
+ * arch/arm/mach-ks8695/include/mach/regs-misc.h
  *
  * Copyright (C) 2006 Andrew Victor
  *
diff --git a/include/asm-arm/arch-ks8695/regs-pci.h b/arch/arm/mach-ks8695/include/mach/regs-pci.h
index 286d6d488df8..75a9db6edbd9 100644
--- a/include/asm-arm/arch-ks8695/regs-pci.h
+++ b/arch/arm/mach-ks8695/include/mach/regs-pci.h
@@ -1,5 +1,5 @@
 /*
- * include/asm-arm/arch-ks8695/regs-pci.h
+ * arch/arm/mach-ks8695/include/mach/regs-pci.h
  *
  * Copyright (C) 2006 Ben Dooks <ben@simtec.co.uk>
  * Copyright (C) 2006 Simtec Electronics
diff --git a/include/asm-arm/arch-ks8695/regs-switch.h b/arch/arm/mach-ks8695/include/mach/regs-switch.h
index 5f37be3f2f60..56d12e8de895 100644
--- a/include/asm-arm/arch-ks8695/regs-switch.h
+++ b/arch/arm/mach-ks8695/include/mach/regs-switch.h
@@ -1,5 +1,5 @@
 /*
- * include/asm-arm/arch-ks8695/regs-switch.h
+ * arch/arm/mach-ks8695/include/mach/regs-switch.h
  *
  * Copyright (C) 2006 Andrew Victor
  *
diff --git a/include/asm-arm/arch-ks8695/regs-sys.h b/arch/arm/mach-ks8695/include/mach/regs-sys.h
index f3179815b8ee..57c20be0c129 100644
--- a/include/asm-arm/arch-ks8695/regs-sys.h
+++ b/arch/arm/mach-ks8695/include/mach/regs-sys.h
@@ -1,5 +1,5 @@
 /*
- * include/asm-arm/arch-ks8695/regs-sys.h
+ * arch/arm/mach-ks8695/include/mach/regs-sys.h
  *
  * Copyright (C) 2006 Ben Dooks <ben@simtec.co.uk>
  * Copyright (C) 2006 Simtec Electronics
diff --git a/include/asm-arm/arch-ks8695/regs-timer.h b/arch/arm/mach-ks8695/include/mach/regs-timer.h
index 0a9f7f99ec52..e620cda99d2d 100644
--- a/include/asm-arm/arch-ks8695/regs-timer.h
+++ b/arch/arm/mach-ks8695/include/mach/regs-timer.h
@@ -1,5 +1,5 @@
 /*
- * include/asm-arm/arch-ks8695/regs-timer.h
+ * arch/arm/mach-ks8695/include/mach/regs-timer.h
  *
  * Copyright (C) 2006 Ben Dooks <ben@simtec.co.uk>
  * Copyright (C) 2006 Simtec Electronics
diff --git a/include/asm-arm/arch-ks8695/regs-uart.h b/arch/arm/mach-ks8695/include/mach/regs-uart.h
index a27cb20502a3..8581fbc6245f 100644
--- a/include/asm-arm/arch-ks8695/regs-uart.h
+++ b/arch/arm/mach-ks8695/include/mach/regs-uart.h
@@ -1,5 +1,5 @@
 /*
- * linux/include/asm-arm/arch-ks8695/regs-uart.h
+ * arch/arm/mach-ks8695/include/mach/regs-uart.h
  *
  * Copyright (C) 2006 Ben Dooks <ben@simtec.co.uk>
  * Copyright (C) 2006 Simtec Electronics
diff --git a/include/asm-arm/arch-ks8695/regs-wan.h b/arch/arm/mach-ks8695/include/mach/regs-wan.h
index 52e35b0d65e4..eb494ec6e956 100644
--- a/include/asm-arm/arch-ks8695/regs-wan.h
+++ b/arch/arm/mach-ks8695/include/mach/regs-wan.h
@@ -1,5 +1,5 @@
 /*
- * include/asm-arm/arch-ks8695/regs-wan.h
+ * arch/arm/mach-ks8695/include/mach/regs-wan.h
  *
  * Copyright (C) 2006 Andrew Victor
  *
diff --git a/arch/arm/mach-ks8695/include/mach/system.h b/arch/arm/mach-ks8695/include/mach/system.h
new file mode 100644
index 000000000000..2a6f91869056
--- /dev/null
+++ b/arch/arm/mach-ks8695/include/mach/system.h
@@ -0,0 +1,48 @@
+/*
+ * arch/arm/mach-s3c2410/include/mach/system.h
+ *
+ * Copyright (C) 2006 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * KS8695 - System function defines and includes
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_SYSTEM_H
+#define __ASM_ARCH_SYSTEM_H
+
+#include <asm/io.h>
+#include <mach/regs-timer.h>
+
+static void arch_idle(void)
+{
+	/*
+	 * This should do all the clock switching
+	 * and wait for interrupt tricks,
+	 */
+	cpu_do_idle();
+
+}
+
+static void arch_reset(char mode)
+{
+	unsigned int reg;
+
+	if (mode == 's')
+		cpu_reset(0);
+
+	/* disable timer0 */
+	reg = __raw_readl(KS8695_TMR_VA + KS8695_TMCON);
+	__raw_writel(reg & ~TMCON_T0EN, KS8695_TMR_VA + KS8695_TMCON);
+
+	/* enable watchdog mode */
+	__raw_writel((10 << 8) | T0TC_WATCHDOG, KS8695_TMR_VA + KS8695_T0TC);
+
+	/* re-enable timer0 */
+	__raw_writel(reg | TMCON_T0EN, KS8695_TMR_VA + KS8695_TMCON);
+}
+
+#endif
diff --git a/arch/arm/mach-ks8695/include/mach/timex.h b/arch/arm/mach-ks8695/include/mach/timex.h
new file mode 100644
index 000000000000..4682e350369b
--- /dev/null
+++ b/arch/arm/mach-ks8695/include/mach/timex.h
@@ -0,0 +1,20 @@
+/*
+ * arch/arm/mach-ks8695/include/mach/timex.h
+ *
+ * Copyright (C) 2006 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * KS8695 - Time Parameters
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_TIMEX_H
+#define __ASM_ARCH_TIMEX_H
+
+/* timers are derived from MCLK, which is 25MHz */
+#define CLOCK_TICK_RATE 25000000
+
+#endif
diff --git a/arch/arm/mach-ks8695/include/mach/uncompress.h b/arch/arm/mach-ks8695/include/mach/uncompress.h
new file mode 100644
index 000000000000..0eee37a69075
--- /dev/null
+++ b/arch/arm/mach-ks8695/include/mach/uncompress.h
@@ -0,0 +1,37 @@
+/*
+ * arch/arm/mach-ks8695/include/mach/uncompress.h
+ *
+ * Copyright (C) 2006 Ben Dooks <ben@simtec.co.uk>
+ * Copyright (C) 2006 Simtec Electronics
+ *
+ * KS8695 - Kernel uncompressor
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_UNCOMPRESS_H
+#define __ASM_ARCH_UNCOMPRESS_H
+
+#include <asm/io.h>
+#include <mach/regs-uart.h>
+
+static void putc(char c)
+{
+	while (!(__raw_readl(KS8695_UART_PA + KS8695_URLS) & URLS_URTHRE))
+		barrier();
+
+	__raw_writel(c, KS8695_UART_PA + KS8695_URTH);
+}
+
+static inline void flush(void)
+{
+	while (!(__raw_readl(KS8695_UART_PA + KS8695_URLS) & URLS_URTE))
+		barrier();
+}
+
+#define arch_decomp_setup()
+#define arch_decomp_wdog()
+
+#endif
diff --git a/arch/arm/mach-ks8695/include/mach/vmalloc.h b/arch/arm/mach-ks8695/include/mach/vmalloc.h
new file mode 100644
index 000000000000..744ac66be3a2
--- /dev/null
+++ b/arch/arm/mach-ks8695/include/mach/vmalloc.h
@@ -0,0 +1,19 @@
+/*
+ * arch/arm/mach-ks8695/include/mach/vmalloc.h
+ *
+ * Copyright (C) 2006 Ben Dooks
+ * Copyright (C) 2006 Simtec Electronics <linux@simtec.co.uk>
+ *
+ * KS8695 vmalloc definition
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_VMALLOC_H
+#define __ASM_ARCH_VMALLOC_H
+
+#define VMALLOC_END	  (KS8695_IO_VA & PGDIR_MASK)
+
+#endif
diff --git a/arch/arm/mach-ks8695/irq.c b/arch/arm/mach-ks8695/irq.c
index 4c3ab43e1046..e5e71f4dbb84 100644
--- a/arch/arm/mach-ks8695/irq.c
+++ b/arch/arm/mach-ks8695/irq.c
@@ -25,14 +25,14 @@
 #include <linux/ioport.h>
 #include <linux/sysdev.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/irq.h>
 #include <asm/io.h>
 
 #include <asm/mach/irq.h>
 
-#include <asm/arch/regs-irq.h>
-#include <asm/arch/regs-gpio.h>
+#include <mach/regs-irq.h>
+#include <mach/regs-gpio.h>
 
 static void ks8695_irq_mask(unsigned int irqno)
 {
@@ -72,21 +72,21 @@ static int ks8695_irq_set_type(unsigned int irqno, unsigned int type)
 	ctrl = __raw_readl(KS8695_GPIO_VA + KS8695_IOPC);
 
 	switch (type) {
-		case IRQT_HIGH:
+		case IRQ_TYPE_LEVEL_HIGH:
 			mode = IOPC_TM_HIGH;
 			level_triggered = 1;
 			break;
-		case IRQT_LOW:
+		case IRQ_TYPE_LEVEL_LOW:
 			mode = IOPC_TM_LOW;
 			level_triggered = 1;
 			break;
-		case IRQT_RISING:
+		case IRQ_TYPE_EDGE_RISING:
 			mode = IOPC_TM_RISING;
 			break;
-		case IRQT_FALLING:
+		case IRQ_TYPE_EDGE_FALLING:
 			mode = IOPC_TM_FALLING;
 			break;
-		case IRQT_BOTHEDGE:
+		case IRQ_TYPE_EDGE_BOTH:
 			mode = IOPC_TM_EDGE;
 			break;
 		default:
diff --git a/arch/arm/mach-ks8695/leds.c b/arch/arm/mach-ks8695/leds.c
index d61762ae50d8..184ef74e4bee 100644
--- a/arch/arm/mach-ks8695/leds.c
+++ b/arch/arm/mach-ks8695/leds.c
@@ -12,10 +12,9 @@
 #include <linux/module.h>
 #include <linux/init.h>
 
-#include <asm/mach-types.h>
 #include <asm/leds.h>
-#include <asm/arch/devices.h>
-#include <asm/arch/gpio.h>
+#include <mach/devices.h>
+#include <mach/gpio.h>
 
 
 static inline void ks8695_led_on(unsigned int led)
diff --git a/arch/arm/mach-ks8695/pci.c b/arch/arm/mach-ks8695/pci.c
index 3f4e0330cb1a..1746c67af176 100644
--- a/arch/arm/mach-ks8695/pci.c
+++ b/arch/arm/mach-ks8695/pci.c
@@ -31,10 +31,10 @@
 #include <asm/io.h>
 #include <asm/signal.h>
 #include <asm/mach/pci.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 
-#include <asm/arch/devices.h>
-#include <asm/arch/regs-pci.h>
+#include <mach/devices.h>
+#include <mach/regs-pci.h>
 
 
 static int pci_dbg;
diff --git a/arch/arm/mach-ks8695/time.c b/arch/arm/mach-ks8695/time.c
index 02f766b3121d..940888dffc16 100644
--- a/arch/arm/mach-ks8695/time.c
+++ b/arch/arm/mach-ks8695/time.c
@@ -28,8 +28,8 @@
 #include <asm/io.h>
 #include <asm/mach/time.h>
 
-#include <asm/arch/regs-timer.h>
-#include <asm/arch/regs-irq.h>
+#include <mach/regs-timer.h>
+#include <mach/regs-irq.h>
 
 #include "generic.h"
 
diff --git a/arch/arm/mach-l7200/core.c b/arch/arm/mach-l7200/core.c
index 561a0fe7095d..50d23246d4f0 100644
--- a/arch/arm/mach-l7200/core.c
+++ b/arch/arm/mach-l7200/core.c
@@ -13,7 +13,7 @@
 #include <asm/types.h>
 #include <asm/irq.h>
 #include <asm/mach-types.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/page.h>
 
 #include <asm/mach/arch.h>
diff --git a/include/asm-arm/arch-l7200/aux_reg.h b/arch/arm/mach-l7200/include/mach/aux_reg.h
index 5b4396de16a0..4671558cdd51 100644
--- a/include/asm-arm/arch-l7200/aux_reg.h
+++ b/arch/arm/mach-l7200/include/mach/aux_reg.h
@@ -1,5 +1,5 @@
 /*
- * linux/include/asm-arm/arch-l7200/aux_reg.h
+ * arch/arm/mach-l7200/include/mach/aux_reg.h
  *
  * Copyright (C) 2000 Steve Hill (sjhill@cotw.com)
  *
@@ -9,7 +9,7 @@
 #ifndef _ASM_ARCH_AUXREG_H
 #define _ASM_ARCH_AUXREG_H
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 
 #define l7200aux_reg	*((volatile unsigned int *) (AUX_BASE))
 
diff --git a/arch/arm/mach-l7200/include/mach/debug-macro.S b/arch/arm/mach-l7200/include/mach/debug-macro.S
new file mode 100644
index 000000000000..34eed2a63e69
--- /dev/null
+++ b/arch/arm/mach-l7200/include/mach/debug-macro.S
@@ -0,0 +1,40 @@
+/* arch/arm/mach-l7200/include/mach/debug-macro.S
+ *
+ * Debugging macro include header
+ *
+ *  Copyright (C) 1994-1999 Russell King
+ *  Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+*/
+
+		.equ	io_virt, IO_BASE
+		.equ	io_phys, IO_START
+
+		.macro	addruart,rx
+		mrc	p15, 0, \rx, c1, c0
+		tst	\rx, #1			@ MMU enabled?
+		moveq	\rx, #io_phys		@ physical base address
+		movne	\rx, #io_virt		@ virtual address
+		add	\rx, \rx, #0x00044000	@ UART1
+@		add	\rx, \rx, #0x00045000	@ UART2
+		.endm
+
+		.macro	senduart,rd,rx
+		str	\rd, [\rx, #0x0]	@ UARTDR
+		.endm
+
+		.macro	waituart,rd,rx
+1001:		ldr	\rd, [\rx, #0x18]	@ UARTFLG
+		tst	\rd, #1 << 5		@ UARTFLGUTXFF - 1 when full
+		bne	1001b
+		.endm
+
+		.macro	busyuart,rd,rx
+1001:		ldr	\rd, [\rx, #0x18]	@ UARTFLG
+		tst	\rd, #1 << 3		@ UARTFLGUBUSY - 1 when busy
+		bne	1001b
+		.endm
diff --git a/arch/arm/mach-l7200/include/mach/dma.h b/arch/arm/mach-l7200/include/mach/dma.h
new file mode 100644
index 000000000000..c7e48bd4590c
--- /dev/null
+++ b/arch/arm/mach-l7200/include/mach/dma.h
@@ -0,0 +1,23 @@
+/*
+ * arch/arm/mach-l7200/include/mach/dma.h
+ *
+ * Copyright (C) 2000 Steve Hill (sjhill@cotw.com)
+ *
+ * Changelog:
+ *  08-29-2000	SJH	Created
+ */
+#ifndef __ASM_ARCH_DMA_H
+#define __ASM_ARCH_DMA_H
+
+/* DMA is not yet implemented! It should be the same as acorn, copy over.. */
+
+/*
+ * This is the maximum DMA address that can be DMAd to.
+ * There should not be more than (0xd0000000 - 0xc0000000)
+ * bytes of RAM.
+ */
+#define MAX_DMA_ADDRESS         0xd0000000
+
+#define DMA_S0                  0
+
+#endif /* _ASM_ARCH_DMA_H */
diff --git a/arch/arm/mach-l7200/include/mach/entry-macro.S b/arch/arm/mach-l7200/include/mach/entry-macro.S
new file mode 100644
index 000000000000..1726d91fc1d3
--- /dev/null
+++ b/arch/arm/mach-l7200/include/mach/entry-macro.S
@@ -0,0 +1,35 @@
+/*
+ * arch/arm/mach-l7200/include/mach/entry-macro.S
+ *
+ * Low-level IRQ helper macros for L7200-based platforms
+ *
+ * This file is licensed under  the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+#include <mach/hardware.h>
+
+		.equ	irq_base_addr,	IO_BASE_2
+
+		.macro  disable_fiq
+		.endm
+
+		.macro  get_irqnr_preamble, base, tmp
+		.endm
+
+		.macro  arch_ret_to_user, tmp1, tmp2
+		.endm
+
+		.macro  get_irqnr_and_base, irqnr, irqstat, base, tmp
+		mov     \irqstat, #irq_base_addr		@ Virt addr IRQ regs
+		add	\irqstat, \irqstat, #0x00001000		@ Status reg
+		ldr     \irqstat, [\irqstat, #0]		@ get interrupts
+		mov     \irqnr, #0
+1001:		tst     \irqstat, #1
+		addeq   \irqnr, \irqnr, #1
+		moveq   \irqstat, \irqstat, lsr #1
+		tsteq   \irqnr, #32
+		beq     1001b
+		teq     \irqnr, #32
+		.endm
+
diff --git a/include/asm-arm/arch-l7200/gp_timers.h b/arch/arm/mach-l7200/include/mach/gp_timers.h
index 9c4804d13578..2b7086a26b81 100644
--- a/include/asm-arm/arch-l7200/gp_timers.h
+++ b/arch/arm/mach-l7200/include/mach/gp_timers.h
@@ -1,5 +1,5 @@
 /*
- * linux/include/asm-arm/arch-l7200/gp_timers.h
+ * arch/arm/mach-l7200/include/mach/gp_timers.h
  *
  * Copyright (C) 2000 Steve Hill (sjhill@cotw.com)
  *
@@ -10,7 +10,7 @@
 #ifndef _ASM_ARCH_GPTIMERS_H
 #define _ASM_ARCH_GPTIMERS_H
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 
 /*
  * Layout of L7200 general purpose timer registers
diff --git a/arch/arm/mach-l7200/include/mach/gpio.h b/arch/arm/mach-l7200/include/mach/gpio.h
new file mode 100644
index 000000000000..c7b0a5d7b8bb
--- /dev/null
+++ b/arch/arm/mach-l7200/include/mach/gpio.h
@@ -0,0 +1,105 @@
+/****************************************************************************/
+/*
+ *      arch/arm/mach-l7200/include/mach/gpio.h
+ *
+ *      Registers and  helper functions for the L7200 Link-Up Systems
+ *      GPIO.
+ *
+ *      (C) Copyright 2000, S A McConnell  (samcconn@cotw.com)
+ *
+ *  This file is subject to the terms and conditions of the GNU General Public
+ *  License. See the file COPYING in the main directory of this archive for
+ *  more details.
+ */
+
+/****************************************************************************/
+
+#define GPIO_OFF   0x00005000  /* Offset from IO_START to the GPIO reg's. */
+
+/* IO_START and IO_BASE are defined in hardware.h */
+
+#define GPIO_START (IO_START_2 + GPIO_OFF) /* Physical addr of the GPIO reg. */
+#define GPIO_BASE  (IO_BASE_2  + GPIO_OFF) /* Virtual addr of the GPIO reg. */
+
+/* Offsets from the start of the GPIO for all the registers. */
+#define PADR_OFF     0x000
+#define PADDR_OFF    0x004
+#define PASBSR_OFF   0x008
+#define PAEENR_OFF   0x00c
+#define PAESNR_OFF   0x010
+#define PAESTR_OFF   0x014
+#define PAIMR_OFF    0x018
+#define PAINT_OFF    0x01c
+
+#define PBDR_OFF     0x020
+#define PBDDR_OFF    0x024
+#define PBSBSR_OFF   0x028
+#define PBIMR_OFF    0x038
+#define PBINT_OFF    0x03c
+
+#define PCDR_OFF     0x040
+#define PCDDR_OFF    0x044
+#define PCSBSR_OFF   0x048
+#define PCIMR_OFF    0x058
+#define PCINT_OFF    0x05c
+
+#define PDDR_OFF     0x060
+#define PDDDR_OFF    0x064
+#define PDSBSR_OFF   0x068
+#define PDEENR_OFF   0x06c
+#define PDESNR_OFF   0x070
+#define PDESTR_OFF   0x074
+#define PDIMR_OFF    0x078
+#define PDINT_OFF    0x07c
+
+#define PEDR_OFF     0x080
+#define PEDDR_OFF    0x084
+#define PESBSR_OFF   0x088
+#define PEEENR_OFF   0x08c
+#define PEESNR_OFF   0x090
+#define PEESTR_OFF   0x094
+#define PEIMR_OFF    0x098
+#define PEINT_OFF    0x09c
+
+/* Define the GPIO registers for use by device drivers and the kernel. */
+#define PADR   (*(volatile unsigned long *)(GPIO_BASE+PADR_OFF))
+#define PADDR  (*(volatile unsigned long *)(GPIO_BASE+PADDR_OFF))
+#define PASBSR (*(volatile unsigned long *)(GPIO_BASE+PASBSR_OFF))
+#define PAEENR (*(volatile unsigned long *)(GPIO_BASE+PAEENR_OFF))
+#define PAESNR (*(volatile unsigned long *)(GPIO_BASE+PAESNR_OFF))
+#define PAESTR (*(volatile unsigned long *)(GPIO_BASE+PAESTR_OFF))
+#define PAIMR  (*(volatile unsigned long *)(GPIO_BASE+PAIMR_OFF))
+#define PAINT  (*(volatile unsigned long *)(GPIO_BASE+PAINT_OFF))
+
+#define PBDR   (*(volatile unsigned long *)(GPIO_BASE+PBDR_OFF))
+#define PBDDR  (*(volatile unsigned long *)(GPIO_BASE+PBDDR_OFF))
+#define PBSBSR (*(volatile unsigned long *)(GPIO_BASE+PBSBSR_OFF))
+#define PBIMR  (*(volatile unsigned long *)(GPIO_BASE+PBIMR_OFF))
+#define PBINT  (*(volatile unsigned long *)(GPIO_BASE+PBINT_OFF))
+
+#define PCDR   (*(volatile unsigned long *)(GPIO_BASE+PCDR_OFF))
+#define PCDDR  (*(volatile unsigned long *)(GPIO_BASE+PCDDR_OFF))
+#define PCSBSR (*(volatile unsigned long *)(GPIO_BASE+PCSBSR_OFF))
+#define PCIMR  (*(volatile unsigned long *)(GPIO_BASE+PCIMR_OFF))
+#define PCINT  (*(volatile unsigned long *)(GPIO_BASE+PCINT_OFF))
+
+#define PDDR   (*(volatile unsigned long *)(GPIO_BASE+PDDR_OFF))
+#define PDDDR  (*(volatile unsigned long *)(GPIO_BASE+PDDDR_OFF))
+#define PDSBSR (*(volatile unsigned long *)(GPIO_BASE+PDSBSR_OFF))
+#define PDEENR (*(volatile unsigned long *)(GPIO_BASE+PDEENR_OFF))
+#define PDESNR (*(volatile unsigned long *)(GPIO_BASE+PDESNR_OFF))
+#define PDESTR (*(volatile unsigned long *)(GPIO_BASE+PDESTR_OFF))
+#define PDIMR  (*(volatile unsigned long *)(GPIO_BASE+PDIMR_OFF))
+#define PDINT  (*(volatile unsigned long *)(GPIO_BASE+PDINT_OFF))
+
+#define PEDR   (*(volatile unsigned long *)(GPIO_BASE+PEDR_OFF))
+#define PEDDR  (*(volatile unsigned long *)(GPIO_BASE+PEDDR_OFF))
+#define PESBSR (*(volatile unsigned long *)(GPIO_BASE+PESBSR_OFF))
+#define PEEENR (*(volatile unsigned long *)(GPIO_BASE+PEEENR_OFF))
+#define PEESNR (*(volatile unsigned long *)(GPIO_BASE+PEESNR_OFF))
+#define PEESTR (*(volatile unsigned long *)(GPIO_BASE+PEESTR_OFF))
+#define PEIMR  (*(volatile unsigned long *)(GPIO_BASE+PEIMR_OFF))
+#define PEINT  (*(volatile unsigned long *)(GPIO_BASE+PEINT_OFF))
+
+#define VEE_EN         0x02
+#define BACKLIGHT_EN   0x04
diff --git a/arch/arm/mach-l7200/include/mach/hardware.h b/arch/arm/mach-l7200/include/mach/hardware.h
new file mode 100644
index 000000000000..c31909cfc254
--- /dev/null
+++ b/arch/arm/mach-l7200/include/mach/hardware.h
@@ -0,0 +1,57 @@
+/*
+ * arch/arm/mach-l7200/include/mach/hardware.h
+ *
+ * Copyright (C) 2000 Rob Scott (rscott@mtrob.fdns.net)
+ *                    Steve Hill (sjhill@cotw.com)
+ *
+ * This file contains the hardware definitions for the 
+ * LinkUp Systems L7200 SOC development board.
+ *
+ * Changelog:
+ *   02-01-2000	 RS	Created L7200 version, derived from rpc code
+ *   03-21-2000	SJH	Cleaned up file
+ *   04-21-2000	 RS 	Changed mapping of I/O in virtual space
+ *   04-25-2000	SJH	Removed unused symbols and such
+ *   05-05-2000	SJH	Complete rewrite
+ *   07-31-2000	SJH	Added undocumented debug auxillary port to
+ *			get at last two columns for keyboard driver
+ */
+#ifndef __ASM_ARCH_HARDWARE_H
+#define __ASM_ARCH_HARDWARE_H
+
+/* Hardware addresses of major areas.
+ *  *_START is the physical address
+ *  *_SIZE  is the size of the region
+ *  *_BASE  is the virtual address
+ */
+#define RAM_START		0xf0000000
+#define RAM_SIZE		0x02000000
+#define RAM_BASE		0xc0000000
+
+#define IO_START		0x80000000      /* I/O */
+#define IO_SIZE			0x01000000
+#define IO_BASE			0xd0000000
+
+#define IO_START_2		0x90000000      /* I/O */
+#define IO_SIZE_2		0x01000000
+#define IO_BASE_2		0xd1000000
+
+#define AUX_START		0x1a000000      /* AUX PORT */
+#define AUX_SIZE 		0x01000000
+#define AUX_BASE		0xd2000000
+
+#define FLASH1_START		0x00000000      /* FLASH BANK 1 */
+#define FLASH1_SIZE 		0x01000000
+#define FLASH1_BASE		0xd3000000
+
+#define FLASH2_START		0x10000000      /* FLASH BANK 2 */
+#define FLASH2_SIZE 		0x01000000
+#define FLASH2_BASE		0xd4000000
+
+#define ISA_START		0x20000000	/* ISA */
+#define ISA_SIZE		0x20000000
+#define ISA_BASE		0xe0000000
+
+#define PCIO_BASE		IO_BASE
+
+#endif
diff --git a/arch/arm/mach-l7200/include/mach/io.h b/arch/arm/mach-l7200/include/mach/io.h
new file mode 100644
index 000000000000..d432ba9e5dff
--- /dev/null
+++ b/arch/arm/mach-l7200/include/mach/io.h
@@ -0,0 +1,27 @@
+/*
+ * arch/arm/mach-l7200/include/mach/io.h
+ *
+ * Copyright (C) 2000 Steve Hill (sjhill@cotw.com)
+ *
+ * Changelog:
+ *  03-21-2000	SJH	Created from arch/arm/mach-nexuspci/include/mach/io.h
+ *  08-31-2000	SJH	Added in IO functions necessary for new drivers
+ */
+#ifndef __ASM_ARM_ARCH_IO_H
+#define __ASM_ARM_ARCH_IO_H
+
+#include <mach/hardware.h>
+
+#define IO_SPACE_LIMIT 0xffffffff
+
+/*
+ * There are not real ISA nor PCI buses, so we fake it.
+ */
+static inline void __iomem *__io(unsigned long addr)
+{
+	return (void __iomem *)addr;
+}
+#define __io(a)	__io(a)
+#define __mem_pci(a)		(a)
+
+#endif
diff --git a/arch/arm/mach-l7200/include/mach/irqs.h b/arch/arm/mach-l7200/include/mach/irqs.h
new file mode 100644
index 000000000000..7edffd713c5b
--- /dev/null
+++ b/arch/arm/mach-l7200/include/mach/irqs.h
@@ -0,0 +1,56 @@
+/*
+ * arch/arm/mach-l7200/include/mach/irqs.h
+ *
+ * Copyright (C) 2000 Rob Scott (rscott@mtrob.fdns.net)
+ *                    Steve Hill (sjhill@cotw.com)
+ *
+ * Changelog:
+ *   01-02-2000 RS	Create l7200 version
+ *   03-28-2000 SJH	Removed unused interrupt
+ *   07-28-2000 SJH	Added pseudo-keyboard interrupt
+ */
+
+/*
+ * NOTE: The second timer (Timer 2) is used as the keyboard
+ *       interrupt when the keyboard driver is enabled.
+ */
+
+#define NR_IRQS          32
+
+#define IRQ_STWDOG        0   /* Watchdog timer */
+#define IRQ_PROG          1   /* Programmable interrupt */
+#define IRQ_DEBUG_RX      2   /* Comm Rx debug */
+#define IRQ_DEBUG_TX      3   /* Comm Tx debug */
+#define IRQ_GCTC1         4   /* Timer 1 */
+#define IRQ_GCTC2         5   /* Timer 2 / Keyboard */
+#define IRQ_DMA           6   /* DMA controller */
+#define IRQ_CLCD          7   /* Color LCD controller */
+#define IRQ_SM_RX         8   /* Smart card */
+#define IRQ_SM_TX         9   /* Smart cart */
+#define IRQ_SM_RST       10   /* Smart card */
+#define IRQ_SIB          11   /* Serial Interface Bus */
+#define IRQ_MMC          12   /* MultiMediaCard */
+#define IRQ_SSP1         13   /* Synchronous Serial Port 1 */
+#define IRQ_SSP2         14   /* Synchronous Serial Port 1 */
+#define IRQ_SPI          15   /* SPI slave */
+#define IRQ_UART_1       16   /* UART 1 */
+#define IRQ_UART_2       17   /* UART 2 */
+#define IRQ_IRDA         18   /* IRDA */
+#define IRQ_RTC_TICK     19   /* Real Time Clock tick */
+#define IRQ_RTC_ALARM    20   /* Real Time Clock alarm */
+#define IRQ_GPIO         21   /* General Purpose IO */
+#define IRQ_GPIO_DMA     22   /* General Purpose IO, DMA */
+#define IRQ_M2M          23   /* Memory to memory DMA  */
+#define IRQ_RESERVED     24   /* RESERVED, don't use */
+#define IRQ_INTF         25   /* External active low interrupt */
+#define IRQ_INT0         26   /* External active low interrupt */
+#define IRQ_INT1         27   /* External active low interrupt */
+#define IRQ_INT2         28   /* External active low interrupt */
+#define IRQ_UCB1200      29   /* Interrupt generated by UCB1200*/
+#define IRQ_BAT_LO       30   /* Low batery or external power */
+#define IRQ_MEDIA_CHG    31   /* Media change interrupt */
+
+/*
+ * This is the offset of the FIQ "IRQ" numbers
+ */
+#define FIQ_START	64
diff --git a/arch/arm/mach-l7200/include/mach/memory.h b/arch/arm/mach-l7200/include/mach/memory.h
new file mode 100644
index 000000000000..f338cf3ffd93
--- /dev/null
+++ b/arch/arm/mach-l7200/include/mach/memory.h
@@ -0,0 +1,29 @@
+/*
+ * arch/arm/mach-l7200/include/mach/memory.h
+ *
+ * Copyright (c) 2000 Steve Hill (sjhill@cotw.com)
+ * Copyright (c) 2000 Rob Scott (rscott@mtrob.fdns.net)
+ *
+ * Changelog:
+ *  03-13-2000	SJH	Created
+ *  04-13-2000  RS      Changed bus macros for new addr
+ *  05-03-2000  SJH     Removed bus macros and fixed virt_to_phys macro
+ */
+#ifndef __ASM_ARCH_MEMORY_H
+#define __ASM_ARCH_MEMORY_H
+
+/*
+ * Physical DRAM offset on the L7200 SDB.
+ */
+#define PHYS_OFFSET     UL(0xf0000000)
+
+#define __virt_to_bus(x) __virt_to_phys(x)
+#define __bus_to_virt(x) __phys_to_virt(x)
+
+/*
+ * Cache flushing area - ROM
+ */
+#define FLUSH_BASE_PHYS		0x40000000
+#define FLUSH_BASE		0xdf000000
+
+#endif
diff --git a/include/asm-arm/arch-l7200/pmpcon.h b/arch/arm/mach-l7200/include/mach/pmpcon.h
index 730056c194be..3959871e8361 100644
--- a/include/asm-arm/arch-l7200/pmpcon.h
+++ b/arch/arm/mach-l7200/include/mach/pmpcon.h
@@ -1,6 +1,6 @@
 /****************************************************************************/
 /*
- *  linux/include/asm-arm/arch-l7200/pmpcon.h
+ *  arch/arm/mach-l7200/include/mach/pmpcon.h
  *
  *   Registers and  helper functions for the L7200 Link-Up Systems
  *   DC/DC converter register.
diff --git a/include/asm-arm/arch-l7200/pmu.h b/arch/arm/mach-l7200/include/mach/pmu.h
index 57faea76d1b3..a2da7aedf208 100644
--- a/include/asm-arm/arch-l7200/pmu.h
+++ b/arch/arm/mach-l7200/include/mach/pmu.h
@@ -1,6 +1,6 @@
 /****************************************************************************/
 /*
- *  linux/include/asm-arm/arch-l7200/pmu.h
+ *  arch/arm/mach-l7200/include/mach/pmu.h
  *
  *   Registers and  helper functions for the L7200 Link-Up Systems
  *   Power Management Unit (PMU).
diff --git a/arch/arm/mach-l7200/include/mach/serial.h b/arch/arm/mach-l7200/include/mach/serial.h
new file mode 100644
index 000000000000..adc05e5f8378
--- /dev/null
+++ b/arch/arm/mach-l7200/include/mach/serial.h
@@ -0,0 +1,37 @@
+/*
+ * arch/arm/mach-l7200/include/mach/serial.h
+ *
+ * Copyright (c) 2000 Rob Scott (rscott@mtrob.fdns.net)
+ *                    Steve Hill (sjhill@cotw.com)
+ *
+ * Changelog:
+ *  03-20-2000  SJH     Created
+ *  03-26-2000  SJH     Added flags for serial ports
+ *  03-27-2000  SJH     Corrected BASE_BAUD value
+ *  04-14-2000  RS      Made register addr dependent on IO_BASE
+ *  05-03-2000  SJH     Complete rewrite
+ *  05-09-2000	SJH	Stripped out architecture specific serial stuff
+ *                      and placed it in a separate file
+ *  07-28-2000	SJH	Moved base baud rate variable
+ */
+#ifndef __ASM_ARCH_SERIAL_H
+#define __ASM_ARCH_SERIAL_H
+
+/*
+ * This assumes you have a 3.6864 MHz clock for your UART.
+ */
+#define BASE_BAUD	3686400
+
+/*
+ * Standard COM flags
+ */
+#define STD_COM_FLAGS (ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST)
+
+#define STD_SERIAL_PORT_DEFNS		\
+	/* MAGIC UART CLK   PORT       IRQ     FLAGS */			\
+	{ 0, BASE_BAUD, UART1_BASE, IRQ_UART_1, STD_COM_FLAGS },  /* ttyLU0 */ \
+	{ 0, BASE_BAUD, UART2_BASE, IRQ_UART_2, STD_COM_FLAGS },  /* ttyLU1 */ \
+
+#define EXTRA_SERIAL_PORT_DEFNS
+
+#endif
diff --git a/include/asm-arm/arch-l7200/serial_l7200.h b/arch/arm/mach-l7200/include/mach/serial_l7200.h
index b1008a9d23e5..645f1c5e568d 100644
--- a/include/asm-arm/arch-l7200/serial_l7200.h
+++ b/arch/arm/mach-l7200/include/mach/serial_l7200.h
@@ -1,5 +1,5 @@
 /*
- * linux/include/asm-arm/arch-l7200/serial_l7200.h
+ * arch/arm/mach-l7200/include/mach/serial_l7200.h
  *
  * Copyright (c) 2000 Steven Hill (sjhill@cotw.com)
  *
@@ -9,7 +9,7 @@
 #ifndef __ASM_ARCH_SERIAL_L7200_H
 #define __ASM_ARCH_SERIAL_L7200_H
 
-#include <asm/arch/memory.h>
+#include <mach/memory.h>
 
 /*
  * This assumes you have a 3.6864 MHz clock for your UART.
diff --git a/include/asm-arm/arch-l7200/sib.h b/arch/arm/mach-l7200/include/mach/sib.h
index bf4364ee2535..965728712cf3 100644
--- a/include/asm-arm/arch-l7200/sib.h
+++ b/arch/arm/mach-l7200/include/mach/sib.h
@@ -1,6 +1,6 @@
 /****************************************************************************/
 /*
- *  linux/include/asm-arm/arch-l7200/sib.h
+ *  arch/arm/mach-l7200/include/mach/sib.h
  *
  *  Registers and helper functions for the Serial Interface Bus.
  *
diff --git a/include/asm-arm/arch-l7200/sys-clock.h b/arch/arm/mach-l7200/include/mach/sys-clock.h
index 771c774f4815..2d7722be60ea 100644
--- a/include/asm-arm/arch-l7200/sys-clock.h
+++ b/arch/arm/mach-l7200/include/mach/sys-clock.h
@@ -1,6 +1,6 @@
 /****************************************************************************/
 /*
- *  linux/include/asm-arm/arch-l7200/sys-clock.h
+ *  arch/arm/mach-l7200/include/mach/sys-clock.h
  *
  *   Registers and  helper functions for the L7200 Link-Up Systems
  *   System clocks.
diff --git a/arch/arm/mach-l7200/include/mach/system.h b/arch/arm/mach-l7200/include/mach/system.h
new file mode 100644
index 000000000000..5272abee0d0e
--- /dev/null
+++ b/arch/arm/mach-l7200/include/mach/system.h
@@ -0,0 +1,29 @@
+/*
+ * arch/arm/mach-l7200/include/mach/system.h
+ *
+ * Copyright (c) 2000 Steve Hill (sjhill@cotw.com)
+ *
+ * Changelog
+ *  03-21-2000  SJH	Created
+ *  04-26-2000  SJH	Fixed functions
+ *  05-03-2000  SJH	Removed usage of obsolete 'iomd.h'
+ *  05-31-2000  SJH	Properly implemented 'arch_idle'
+ */
+#ifndef __ASM_ARCH_SYSTEM_H
+#define __ASM_ARCH_SYSTEM_H
+
+#include <mach/hardware.h>
+
+static inline void arch_idle(void)
+{
+	*(unsigned long *)(IO_BASE + 0x50004) = 1;	/* idle mode */
+}
+
+static inline void arch_reset(char mode)
+{
+	if (mode == 's') {
+		cpu_reset(0);
+	}
+}
+
+#endif
diff --git a/arch/arm/mach-l7200/include/mach/time.h b/arch/arm/mach-l7200/include/mach/time.h
new file mode 100644
index 000000000000..061771c2c2bd
--- /dev/null
+++ b/arch/arm/mach-l7200/include/mach/time.h
@@ -0,0 +1,73 @@
+/*
+ * arch/arm/mach-l7200/include/mach/time.h
+ *
+ * Copyright (C) 2000 Rob Scott (rscott@mtrob.fdns.net)
+ *                    Steve Hill (sjhill@cotw.com)
+ *
+ * Changelog:
+ *   01-02-2000	RS	Created l7200 version, derived from rpc code
+ *   05-03-2000	SJH	Complete rewrite
+ */
+#ifndef _ASM_ARCH_TIME_H
+#define _ASM_ARCH_TIME_H
+
+#include <mach/irqs.h>
+
+/*
+ * RTC base register address
+ */
+#define RTC_BASE	(IO_BASE_2 + 0x2000)
+
+/*
+ * RTC registers
+ */
+#define RTC_RTCDR	(*(volatile unsigned char *) (RTC_BASE + 0x000))
+#define RTC_RTCMR	(*(volatile unsigned char *) (RTC_BASE + 0x004))
+#define RTC_RTCS	(*(volatile unsigned char *) (RTC_BASE + 0x008))
+#define RTC_RTCC	(*(volatile unsigned char *) (RTC_BASE + 0x008))
+#define RTC_RTCDV	(*(volatile unsigned char *) (RTC_BASE + 0x00c))
+#define RTC_RTCCR	(*(volatile unsigned char *) (RTC_BASE + 0x010))
+
+/*
+ * RTCCR register values
+ */
+#define RTC_RATE_32	0x00      /* 32 Hz tick */
+#define RTC_RATE_64	0x10      /* 64 Hz tick */
+#define RTC_RATE_128	0x20      /* 128 Hz tick */
+#define RTC_RATE_256	0x30      /* 256 Hz tick */
+#define RTC_EN_ALARM	0x01      /* Enable alarm */
+#define RTC_EN_TIC	0x04      /* Enable counter */
+#define RTC_EN_STWDOG	0x08      /* Enable watchdog */
+
+/*
+ * Handler for RTC timer interrupt
+ */
+static irqreturn_t
+timer_interrupt(int irq, void *dev_id)
+{
+	struct pt_regs *regs = get_irq_regs();
+	do_timer(1);
+#ifndef CONFIG_SMP
+	update_process_times(user_mode(regs));
+#endif
+	do_profile(regs);
+	RTC_RTCC = 0;				/* Clear interrupt */
+
+	return IRQ_HANDLED;
+}
+
+/*
+ * Set up RTC timer interrupt, and return the current time in seconds.
+ */
+void __init time_init(void)
+{
+	RTC_RTCC = 0;				/* Clear interrupt */
+
+	timer_irq.handler = timer_interrupt;
+
+	setup_irq(IRQ_RTC_TICK, &timer_irq);
+
+	RTC_RTCCR = RTC_RATE_128 | RTC_EN_TIC;	/* Set rate and enable timer */
+}
+
+#endif
diff --git a/arch/arm/mach-l7200/include/mach/timex.h b/arch/arm/mach-l7200/include/mach/timex.h
new file mode 100644
index 000000000000..ffc96a63b5a2
--- /dev/null
+++ b/arch/arm/mach-l7200/include/mach/timex.h
@@ -0,0 +1,20 @@
+/*
+ * arch/arm/mach-l7200/include/mach/timex.h
+ *
+ * Copyright (C) 2000 Rob Scott (rscott@mtrob.fdns.net)
+ *                    Steve Hill (sjhill@cotw.com)
+ *
+ * 04-21-2000  RS Created file
+ * 05-03-2000 SJH Tick rate was wrong
+ *
+ */
+
+/*
+ * On the ARM720T, clock ticks are set to 128 Hz.
+ *
+ * NOTE: The actual RTC value is set in 'time.h' which
+ *       must be changed when choosing a different tick
+ *       rate. The value of HZ in 'param.h' must also
+ *       be changed to match below.
+ */
+#define CLOCK_TICK_RATE		128
diff --git a/arch/arm/mach-l7200/include/mach/uncompress.h b/arch/arm/mach-l7200/include/mach/uncompress.h
new file mode 100644
index 000000000000..591c962bb315
--- /dev/null
+++ b/arch/arm/mach-l7200/include/mach/uncompress.h
@@ -0,0 +1,39 @@
+/*
+ * arch/arm/mach-l7200/include/mach/uncompress.h
+ *
+ * Copyright (C) 2000 Steve Hill (sjhill@cotw.com)
+ *
+ * Changelog:
+ *  05-01-2000	SJH	Created
+ *  05-13-2000	SJH	Filled in function bodies
+ *  07-26-2000	SJH	Removed hard coded baud rate
+ */
+
+#include <mach/hardware.h>
+
+#define IO_UART  IO_START + 0x00044000
+
+#define __raw_writeb(v,p)	(*(volatile unsigned char *)(p) = (v))
+#define __raw_readb(p)		(*(volatile unsigned char *)(p))
+
+static inline void putc(int c)
+{
+	while(__raw_readb(IO_UART + 0x18) & 0x20 ||
+	      __raw_readb(IO_UART + 0x18) & 0x08)
+		barrier();
+
+	__raw_writeb(c, IO_UART + 0x00);
+}
+
+static inline void flush(void)
+{
+}
+
+static __inline__ void arch_decomp_setup(void)
+{
+	__raw_writeb(0x00, IO_UART + 0x08);	/* Set HSB */
+	__raw_writeb(0x00, IO_UART + 0x20);	/* Disable IRQs */
+	__raw_writeb(0x01, IO_UART + 0x14);	/* Enable UART */
+}
+
+#define arch_decomp_wdog()
diff --git a/arch/arm/mach-l7200/include/mach/vmalloc.h b/arch/arm/mach-l7200/include/mach/vmalloc.h
new file mode 100644
index 000000000000..85f0abbf15f1
--- /dev/null
+++ b/arch/arm/mach-l7200/include/mach/vmalloc.h
@@ -0,0 +1,4 @@
+/*
+ * arch/arm/mach-l7200/include/mach/vmalloc.h
+ */
+#define VMALLOC_END       (PAGE_OFFSET + 0x10000000)
diff --git a/arch/arm/mach-lh7a40x/arch-kev7a400.c b/arch/arm/mach-lh7a40x/arch-kev7a400.c
index 2ef7d0097b38..551b97261826 100644
--- a/arch/arm/mach-lh7a40x/arch-kev7a400.c
+++ b/arch/arm/mach-lh7a40x/arch-kev7a400.c
@@ -13,7 +13,7 @@
 #include <linux/device.h>
 #include <linux/interrupt.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/setup.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
diff --git a/arch/arm/mach-lh7a40x/arch-lpd7a40x.c b/arch/arm/mach-lh7a40x/arch-lpd7a40x.c
index fe64946f9e18..e373fb8e2699 100644
--- a/arch/arm/mach-lh7a40x/arch-lpd7a40x.c
+++ b/arch/arm/mach-lh7a40x/arch-lpd7a40x.c
@@ -14,7 +14,7 @@
 #include <linux/interrupt.h>
 #include <linux/irq.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/setup.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
diff --git a/arch/arm/mach-lh7a40x/clcd.c b/arch/arm/mach-lh7a40x/clcd.c
index 1992db4c2523..a2a543258fc3 100644
--- a/arch/arm/mach-lh7a40x/clcd.c
+++ b/arch/arm/mach-lh7a40x/clcd.c
@@ -17,14 +17,13 @@
 
 //#include <linux/module.h>
 //#include <linux/time.h>
-//#include <asm/hardware.h>
 
 //#include <asm/mach/time.h>
 #include <asm/irq.h>
 #include <asm/mach/irq.h>
 
 #include <asm/system.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <linux/amba/bus.h>
 #include <linux/amba/clcd.h>
 
diff --git a/arch/arm/mach-lh7a40x/clocks.c b/arch/arm/mach-lh7a40x/clocks.c
index 7530a95c15a6..4fb23ac6b5ac 100644
--- a/arch/arm/mach-lh7a40x/clocks.c
+++ b/arch/arm/mach-lh7a40x/clocks.c
@@ -9,8 +9,8 @@
  */
 
 #include <linux/cpufreq.h>
-#include <asm/hardware.h>
-#include <asm/arch/clocks.h>
+#include <mach/hardware.h>
+#include <mach/clocks.h>
 #include <linux/err.h>
 
 struct module;
diff --git a/include/asm-arm/arch-lh7a40x/clocks.h b/arch/arm/mach-lh7a40x/include/mach/clocks.h
index 7d0ba18ad578..fe2e0255c084 100644
--- a/include/asm-arm/arch-lh7a40x/clocks.h
+++ b/arch/arm/mach-lh7a40x/include/mach/clocks.h
@@ -1,4 +1,4 @@
-/* include/asm-arm/arch-lh7a40x/clocks.h
+/* arch/arm/mach-lh7a40x/include/mach/clocks.h
  *
  *  Copyright (C) 2004 Marc Singer
  *
diff --git a/include/asm-arm/arch-lh7a40x/constants.h b/arch/arm/mach-lh7a40x/include/mach/constants.h
index 51de96e87faf..55c6edbc2dfd 100644
--- a/include/asm-arm/arch-lh7a40x/constants.h
+++ b/arch/arm/mach-lh7a40x/include/mach/constants.h
@@ -1,4 +1,4 @@
-/* include/asm-arm/arch-lh7a40x/constants.h
+/* arch/arm/mach-lh7a40x/include/mach/constants.h
  *
  *  Copyright (C) 2004 Coastal Environmental Systems
  *  Copyright (C) 2004 Logic Product Development
diff --git a/arch/arm/mach-lh7a40x/include/mach/debug-macro.S b/arch/arm/mach-lh7a40x/include/mach/debug-macro.S
new file mode 100644
index 000000000000..85141ed5383d
--- /dev/null
+++ b/arch/arm/mach-lh7a40x/include/mach/debug-macro.S
@@ -0,0 +1,39 @@
+/* arch/arm/mach-lh7a40x/include/mach/debug-macro.S
+ *
+ * Debugging macro include header
+ *
+ *  Copyright (C) 1994-1999 Russell King
+ *  Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+*/
+
+	@ It is not known if this will be appropriate for every 40x
+	@ board.
+
+		.macro  addruart,rx
+		mrc     p15, 0, \rx, c1, c0
+		tst     \rx, #1                 @ MMU enabled?
+		mov     \rx, #0x00000700        @ offset from base
+		orreq   \rx, \rx, #0x80000000   @ physical base
+		orrne   \rx, \rx, #0xf8000000   @ virtual base
+		.endm
+
+		.macro  senduart,rd,rx
+		strb    \rd, [\rx]              @ DATA
+		.endm
+
+		.macro  busyuart,rd,rx          @ spin while busy
+1001:		ldr     \rd, [\rx, #0x10]       @ STATUS
+		tst     \rd, #1 << 3            @ BUSY (TX FIFO not empty)
+		bne     1001b                   @ yes, spin
+		.endm
+
+		.macro  waituart,rd,rx          @ wait for Tx FIFO room
+1001:		ldrb    \rd, [\rx, #0x10]       @ STATUS
+		tst     \rd, #1 << 5            @ TXFF (TX FIFO full)
+		bne     1001b                   @ yes, spin
+		.endm
diff --git a/arch/arm/mach-lh7a40x/include/mach/dma.h b/arch/arm/mach-lh7a40x/include/mach/dma.h
new file mode 100644
index 000000000000..baa3f8dbd04b
--- /dev/null
+++ b/arch/arm/mach-lh7a40x/include/mach/dma.h
@@ -0,0 +1,86 @@
+/* arch/arm/mach-lh7a40x/include/mach/dma.h
+ *
+ *  Copyright (C) 2005 Marc Singer
+ *
+ *  This program is free software; you can redistribute it and/or
+ *  modify it under the terms of the GNU General Public License
+ *  version 2 as published by the Free Software Foundation.
+ *
+ */
+
+typedef enum {
+	DMA_M2M0	= 0,
+	DMA_M2M1	= 1,
+	DMA_M2P0	= 2,	/* Tx */
+	DMA_M2P1	= 3,	/* Rx */
+	DMA_M2P2	= 4,	/* Tx */
+	DMA_M2P3	= 5,	/* Rx */
+	DMA_M2P4	= 6,	/* Tx - AC97 */
+	DMA_M2P5	= 7,	/* Rx - AC97 */
+	DMA_M2P6	= 8,	/* Tx */
+	DMA_M2P7	= 9,	/* Rx */
+} dma_device_t;
+
+#define DMA_LENGTH_MAX		((64*1024) - 4) /* bytes */
+
+#define DMAC_GCA		__REG(DMAC_PHYS + 0x2b80)
+#define DMAC_GIR		__REG(DMAC_PHYS + 0x2bc0)
+
+#define DMAC_GIR_MMI1		(1<<11)
+#define DMAC_GIR_MMI0		(1<<10)
+#define DMAC_GIR_MPI8		(1<<9)
+#define DMAC_GIR_MPI9		(1<<8)
+#define DMAC_GIR_MPI6		(1<<7)
+#define DMAC_GIR_MPI7		(1<<6)
+#define DMAC_GIR_MPI4		(1<<5)
+#define DMAC_GIR_MPI5		(1<<4)
+#define DMAC_GIR_MPI2		(1<<3)
+#define DMAC_GIR_MPI3		(1<<2)
+#define DMAC_GIR_MPI0		(1<<1)
+#define DMAC_GIR_MPI1		(1<<0)
+
+#define DMAC_M2P0		0x0000
+#define DMAC_M2P1		0x0040
+#define DMAC_M2P2		0x0080
+#define DMAC_M2P3		0x00c0
+#define DMAC_M2P4		0x0240
+#define DMAC_M2P5		0x0200
+#define DMAC_M2P6		0x02c0
+#define DMAC_M2P7		0x0280
+#define DMAC_M2P8		0x0340
+#define DMAC_M2P9		0x0300
+#define DMAC_M2M0		0x0100
+#define DMAC_M2M1		0x0140
+
+#define DMAC_P_PCONTROL(c)	__REG(DMAC_PHYS + (c) + 0x00)
+#define DMAC_P_PINTERRUPT(c)	__REG(DMAC_PHYS + (c) + 0x04)
+#define DMAC_P_PPALLOC(c)	__REG(DMAC_PHYS + (c) + 0x08)
+#define DMAC_P_PSTATUS(c)	__REG(DMAC_PHYS + (c) + 0x0c)
+#define DMAC_P_REMAIN(c)	__REG(DMAC_PHYS + (c) + 0x14)
+#define DMAC_P_MAXCNT0(c)	__REG(DMAC_PHYS + (c) + 0x20)
+#define DMAC_P_BASE0(c)		__REG(DMAC_PHYS + (c) + 0x24)
+#define DMAC_P_CURRENT0(c)	__REG(DMAC_PHYS + (c) + 0x28)
+#define DMAC_P_MAXCNT1(c)	__REG(DMAC_PHYS + (c) + 0x30)
+#define DMAC_P_BASE1(c)		__REG(DMAC_PHYS + (c) + 0x34)
+#define DMAC_P_CURRENT1(c)	__REG(DMAC_PHYS + (c) + 0x38)
+
+#define DMAC_PCONTROL_ENABLE	(1<<4)
+
+#define DMAC_PORT_USB		0
+#define DMAC_PORT_SDMMC		1
+#define DMAC_PORT_AC97_1	2
+#define DMAC_PORT_AC97_2	3
+#define DMAC_PORT_AC97_3	4
+#define DMAC_PORT_UART1		6
+#define DMAC_PORT_UART2		7
+#define DMAC_PORT_UART3		8
+
+#define DMAC_PSTATUS_CURRSTATE_SHIFT	4
+#define DMAC_PSTATUS_CURRSTATE_MASK	0x3
+
+#define DMAC_PSTATUS_NEXTBUF	 (1<<6)
+#define DMAC_PSTATUS_STALLRINT	 (1<<0)
+
+#define DMAC_INT_CHE		 (1<<3)
+#define DMAC_INT_NFB		 (1<<1)
+#define DMAC_INT_STALL		 (1<<0)
diff --git a/arch/arm/mach-lh7a40x/include/mach/entry-macro.S b/arch/arm/mach-lh7a40x/include/mach/entry-macro.S
new file mode 100644
index 000000000000..069bb4cefff7
--- /dev/null
+++ b/arch/arm/mach-lh7a40x/include/mach/entry-macro.S
@@ -0,0 +1,149 @@
+/*
+ * arch/arm/mach-lh7a40x/include/mach/entry-macro.S
+ *
+ * Low-level IRQ helper macros for LH7A40x platforms
+ *
+ * This file is licensed under  the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+#include <mach/hardware.h>
+#include <mach/irqs.h>
+
+/* In order to allow there to be support for both of the processor
+   classes at the same time, we make a hack here that isn't very
+   pretty.  At startup, the link pointed to with the
+   branch_irq_lh7a400 symbol is replaced with a NOP when the CPU is
+   detected as a lh7a404.
+
+   *** FIXME: we should clean this up so that there is only one
+	      implementation for each CPU's design.
+
+*/
+
+#if defined (CONFIG_ARCH_LH7A400) && defined (CONFIG_ARCH_LH7A404)
+
+		.macro	disable_fiq
+		.endm
+
+		.macro  get_irqnr_preamble, base, tmp
+		.endm
+
+		.macro  arch_ret_to_user, tmp1, tmp2
+		.endm
+
+		.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
+
+branch_irq_lh7a400: b 1000f
+
+@ Implementation of the LH7A404 get_irqnr_and_base.
+
+		mov	\irqnr, #0			@ VIC1 irq base
+		mov	\base, #io_p2v(0x80000000)	@ APB registers
+		add	\base, \base, #0x8000
+		ldr	\tmp, [\base, #0x0030]		@ VIC1_VECTADDR
+		tst	\tmp, #VA_VECTORED		@ Direct vectored
+		bne	1002f
+		tst	\tmp, #VA_VIC1DEFAULT		@ Default vectored VIC1
+		ldrne	\irqstat, [\base, #0]		@ VIC1_IRQSTATUS
+		bne	1001f
+		add	\base, \base, #(0xa000 - 0x8000)
+		ldr	\tmp, [\base, #0x0030]		@ VIC2_VECTADDR
+		tst	\tmp, #VA_VECTORED		@ Direct vectored
+		bne	1002f
+		ldr	\irqstat, [\base, #0]		@ VIC2_IRQSTATUS
+		mov	\irqnr, #32			@ VIC2 irq base
+
+1001:		movs	\irqstat, \irqstat, lsr #1	@ Shift into carry
+		bcs	1008f				@ Bit set; irq found
+		add	\irqnr, \irqnr, #1
+		bne	1001b				@ Until no bits
+		b	1009f				@ Nothing?  Hmm.
+1002:		and	\irqnr, \tmp, #0x3f		@ Mask for valid bits
+1008:		movs	\irqstat, #1			@ Force !Z
+		str	\tmp, [\base, #0x0030]		@ Clear vector
+		b	1009f
+
+@ Implementation of the LH7A400 get_irqnr_and_base.
+
+1000:		mov	\irqnr, #0
+		mov	\base, #io_p2v(0x80000000)	@ APB registers
+		ldr	\irqstat, [\base, #0x500]	@ PIC INTSR
+
+1001:		movs	\irqstat, \irqstat, lsr #1	@ Shift into carry
+		bcs	1008f				@ Bit set; irq found
+		add	\irqnr, \irqnr, #1
+		bne	1001b				@ Until no bits
+		b	1009f				@ Nothing?  Hmm.
+1008:		movs	\irqstat, #1			@ Force !Z
+
+1009:
+               .endm
+
+
+
+#elif defined (CONFIG_ARCH_LH7A400)
+		.macro	disable_fiq
+		.endm
+
+		.macro  get_irqnr_preamble, base, tmp
+		.endm
+
+		.macro  arch_ret_to_user, tmp1, tmp2
+		.endm
+
+		.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
+		mov	\irqnr, #0
+		mov	\base, #io_p2v(0x80000000)	@ APB registers
+		ldr	\irqstat, [\base, #0x500]	@ PIC INTSR
+
+1001:		movs	\irqstat, \irqstat, lsr #1	@ Shift into carry
+		bcs	1008f				@ Bit set; irq found
+		add	\irqnr, \irqnr, #1
+		bne	1001b				@ Until no bits
+		b	1009f				@ Nothing?  Hmm.
+1008:		movs	\irqstat, #1			@ Force !Z
+1009:
+               .endm
+
+#elif defined(CONFIG_ARCH_LH7A404)
+
+		.macro	disable_fiq
+		.endm
+
+		.macro  get_irqnr_preamble, base, tmp
+		.endm
+
+		.macro  arch_ret_to_user, tmp1, tmp2
+		.endm
+
+		.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
+		mov	\irqnr, #0			@ VIC1 irq base
+		mov	\base, #io_p2v(0x80000000)	@ APB registers
+		add	\base, \base, #0x8000
+		ldr	\tmp, [\base, #0x0030]		@ VIC1_VECTADDR
+		tst	\tmp, #VA_VECTORED		@ Direct vectored
+		bne	1002f
+		tst	\tmp, #VA_VIC1DEFAULT		@ Default vectored VIC1
+		ldrne	\irqstat, [\base, #0]		@ VIC1_IRQSTATUS
+		bne	1001f
+		add	\base, \base, #(0xa000 - 0x8000)
+		ldr	\tmp, [\base, #0x0030]		@ VIC2_VECTADDR
+		tst	\tmp, #VA_VECTORED		@ Direct vectored
+		bne	1002f
+		ldr	\irqstat, [\base, #0]		@ VIC2_IRQSTATUS
+		mov	\irqnr, #32			@ VIC2 irq base
+
+1001:		movs	\irqstat, \irqstat, lsr #1	@ Shift into carry
+		bcs	1008f				@ Bit set; irq found
+		add	\irqnr, \irqnr, #1
+		bne	1001b				@ Until no bits
+		b	1009f				@ Nothing?  Hmm.
+1002:		and	\irqnr, \tmp, #0x3f		@ Mask for valid bits
+1008:		movs	\irqstat, #1			@ Force !Z
+		str	\tmp, [\base, #0x0030]		@ Clear vector
+1009:
+               .endm
+#endif
+
+
diff --git a/arch/arm/mach-lh7a40x/include/mach/hardware.h b/arch/arm/mach-lh7a40x/include/mach/hardware.h
new file mode 100644
index 000000000000..48e827d2fa56
--- /dev/null
+++ b/arch/arm/mach-lh7a40x/include/mach/hardware.h
@@ -0,0 +1,62 @@
+/* arch/arm/mach-lh7a40x/include/mach/hardware.h
+ *
+ *  Copyright (C) 2004 Coastal Environmental Systems
+ *
+ *  [ Substantially cribbed from arch/arm/mach-pxa/include/mach/hardware.h ]
+ *
+ *  This program is free software; you can redistribute it and/or
+ *  modify it under the terms of the GNU General Public License
+ *  version 2 as published by the Free Software Foundation.
+ *
+ */
+
+#ifndef __ASM_ARCH_HARDWARE_H
+#define __ASM_ARCH_HARDWARE_H
+
+#include <asm/sizes.h>		/* Added for the sake of amba-clcd driver */
+
+#define io_p2v(x) (0xf0000000 | (((x) & 0xfff00000) >> 4) | ((x) & 0x0000ffff))
+#define io_v2p(x) (             (((x) & 0x0fff0000) << 4) | ((x) & 0x0000ffff))
+
+#ifdef __ASSEMBLY__
+
+# define __REG(x)	io_p2v(x)
+# define __PREG(x)	io_v2p(x)
+
+#else
+
+# if 0
+#  define __REG(x)	(*((volatile u32 *)io_p2v(x)))
+# else
+/*
+ * This __REG() version gives the same results as the one above,  except
+ * that we are fooling gcc somehow so it generates far better and smaller
+ * assembly code for access to contigous registers.  It's a shame that gcc
+ * doesn't guess this by itself.
+ */
+#include <asm/types.h>
+typedef struct { volatile u32 offset[4096]; } __regbase;
+# define __REGP(x)	((__regbase *)((x)&~4095))->offset[((x)&4095)>>2]
+# define __REG(x)	__REGP(io_p2v(x))
+typedef struct { volatile u16 offset[4096]; } __regbase16;
+# define __REGP16(x)	((__regbase16 *)((x)&~4095))->offset[((x)&4095)>>1]
+# define __REG16(x)	__REGP16(io_p2v(x))
+typedef struct { volatile u8 offset[4096]; } __regbase8;
+# define __REGP8(x)	((__regbase8 *)((x)&~4095))->offset[(x)&4095]
+# define __REG8(x)	__REGP8(io_p2v(x))
+#endif
+
+/* Let's kick gcc's ass again... */
+# define __REG2(x,y)	\
+	( __builtin_constant_p(y) ? (__REG((x) + (y))) \
+				  : (*(volatile u32 *)((u32)&__REG(x) + (y))) )
+
+# define __PREG(x)	(io_v2p((u32)&(x)))
+
+#endif
+
+#define MASK_AND_SET(v,m,s)	(v) = ((v)&~(m))|(s)
+
+#include "registers.h"
+
+#endif  /* _ASM_ARCH_HARDWARE_H */
diff --git a/arch/arm/mach-lh7a40x/include/mach/io.h b/arch/arm/mach-lh7a40x/include/mach/io.h
new file mode 100644
index 000000000000..031d26f9163c
--- /dev/null
+++ b/arch/arm/mach-lh7a40x/include/mach/io.h
@@ -0,0 +1,22 @@
+/* arch/arm/mach-lh7a40x/include/mach/io.h
+ *
+ *  Copyright (C) 2004 Coastal Environmental Systems
+ *
+ *  This program is free software; you can redistribute it and/or
+ *  modify it under the terms of the GNU General Public License
+ *  version 2 as published by the Free Software Foundation.
+ *
+ */
+
+#ifndef __ASM_ARCH_IO_H
+#define __ASM_ARCH_IO_H
+
+#include <mach/hardware.h>
+
+#define IO_SPACE_LIMIT 0xffffffff
+
+/* No ISA or PCI bus on this machine. */
+#define __io(a)			((void __iomem *)(a))
+#define __mem_pci(a)		(a)
+
+#endif /* __ASM_ARCH_IO_H */
diff --git a/arch/arm/mach-lh7a40x/include/mach/irqs.h b/arch/arm/mach-lh7a40x/include/mach/irqs.h
new file mode 100644
index 000000000000..0f9b83675935
--- /dev/null
+++ b/arch/arm/mach-lh7a40x/include/mach/irqs.h
@@ -0,0 +1,200 @@
+/* arch/arm/mach-lh7a40x/include/mach/irqs.h
+ *
+ *  Copyright (C) 2004 Coastal Environmental Systems
+ *  Copyright (C) 2004 Logic Product Development
+ *
+ *  This program is free software; you can redistribute it and/or
+ *  modify it under the terms of the GNU General Public License
+ *  version 2 as published by the Free Software Foundation.
+ *
+ */
+
+/* It is to be seen whether or not we can build a kernel for more than
+ * one board.  For the time being, these macros assume that we cannot.
+ * Thus, it is OK to ifdef machine/board specific IRQ assignments.
+ */
+
+
+#ifndef __ASM_ARCH_IRQS_H
+#define __ASM_ARCH_IRQS_H
+
+
+#define FIQ_START	80
+
+#if defined (CONFIG_ARCH_LH7A400)
+
+  /* FIQs */
+
+# define IRQ_GPIO0FIQ	0	/* GPIO External FIQ Interrupt on F0 */
+# define IRQ_BLINT	1	/* Battery Low */
+# define IRQ_WEINT	2	/* Watchdog Timer, WDT overflow	*/
+# define IRQ_MCINT	3	/* Media Change, MEDCHG pin rising */
+
+  /* IRQs */
+
+# define IRQ_CSINT	4	/* Audio Codec (ACI) */
+# define IRQ_GPIO1INTR	5	/* GPIO External IRQ Interrupt on F1 */
+# define IRQ_GPIO2INTR	6	/* GPIO External IRQ Interrupt on F2 */
+# define IRQ_GPIO3INTR	7	/* GPIO External IRQ Interrupt on F3 */
+# define IRQ_T1UI	8	/* Timer 1 underflow */
+# define IRQ_T2UI	9	/* Timer 2 underflow */
+# define IRQ_RTCMI	10
+# define IRQ_TINTR	11	/* Clock State Controller 64 Hz tick (CSC) */
+# define IRQ_UART1INTR	12
+# define IRQ_UART2INTR	13
+# define IRQ_LCDINTR	14
+# define IRQ_SSIEOT	15	/* Synchronous Serial Interface (SSI) */
+# define IRQ_UART3INTR	16
+# define IRQ_SCIINTR	17	/* Smart Card Interface (SCI) */
+# define IRQ_AACINTR	18	/* Advanced Audio Codec (AAC) */
+# define IRQ_MMCINTR	19	/* Multimedia Card (MMC) */
+# define IRQ_USBINTR	20
+# define IRQ_DMAINTR	21
+# define IRQ_T3UI	22	/* Timer 3 underflow */
+# define IRQ_GPIO4INTR	23	/* GPIO External IRQ Interrupt on F4 */
+# define IRQ_GPIO5INTR	24	/* GPIO External IRQ Interrupt on F5 */
+# define IRQ_GPIO6INTR	25	/* GPIO External IRQ Interrupt on F6 */
+# define IRQ_GPIO7INTR	26	/* GPIO External IRQ Interrupt on F7 */
+# define IRQ_BMIINTR	27	/* Battery Monitor Interface (BMI) */
+
+# define NR_IRQ_CPU	28	/* IRQs directly recognized by CPU */
+
+	/* Given IRQ, return GPIO interrupt number 0-7 */
+# define IRQ_TO_GPIO(i)  ((i) \
+	- (((i) > IRQ_GPIO3INTR) ? IRQ_GPIO4INTR - IRQ_GPIO3INTR - 1 : 0)\
+	- (((i) > IRQ_GPIO0INTR) ? IRQ_GPIO1INTR - IRQ_GPIO0INTR - 1 : 0))
+
+#endif
+
+#if defined (CONFIG_ARCH_LH7A404)
+
+# define IRQ_BROWN	0	/* Brownout */
+# define IRQ_WDTINTR	1	/* Watchdog Timer */
+# define IRQ_COMMRX	2	/* ARM Comm Rx for Debug */
+# define IRQ_COMMTX	3	/* ARM Comm Tx for Debug */
+# define IRQ_T1UI	4	/* Timer 1 underflow */
+# define IRQ_T2UI	5	/* Timer 2 underflow */
+# define IRQ_CSINT	6	/* Codec Interrupt (shared by AAC on 404) */
+# define IRQ_DMAM2P0	7	/* -- DMA Memory to Peripheral */
+# define IRQ_DMAM2P1	8
+# define IRQ_DMAM2P2	9
+# define IRQ_DMAM2P3	10
+# define IRQ_DMAM2P4	11
+# define IRQ_DMAM2P5	12
+# define IRQ_DMAM2P6	13
+# define IRQ_DMAM2P7	14
+# define IRQ_DMAM2P8	15
+# define IRQ_DMAM2P9	16
+# define IRQ_DMAM2M0	17	/* -- DMA Memory to Memory */
+# define IRQ_DMAM2M1	18
+# define IRQ_GPIO0INTR	19	/* -- GPIOF Interrupt */
+# define IRQ_GPIO1INTR	20
+# define IRQ_GPIO2INTR	21
+# define IRQ_GPIO3INTR	22
+# define IRQ_SOFT_V1_23	23	/* -- Unassigned */
+# define IRQ_SOFT_V1_24	24
+# define IRQ_SOFT_V1_25	25
+# define IRQ_SOFT_V1_26	26
+# define IRQ_SOFT_V1_27	27
+# define IRQ_SOFT_V1_28	28
+# define IRQ_SOFT_V1_29	29
+# define IRQ_SOFT_V1_30	30
+# define IRQ_SOFT_V1_31	31
+
+# define IRQ_BLINT	32	/* Battery Low */
+# define IRQ_BMIINTR	33	/* Battery Monitor */
+# define IRQ_MCINTR	34	/* Media Change */
+# define IRQ_TINTR	35	/* 64Hz Tick */
+# define IRQ_WEINT	36	/* Watchdog Expired */
+# define IRQ_RTCMI	37	/* Real-time Clock Match */
+# define IRQ_UART1INTR	38	/* UART1 Interrupt (including error) */
+# define IRQ_UART1ERR	39	/* UART1 Error */
+# define IRQ_UART2INTR	40	/* UART2 Interrupt (including error) */
+# define IRQ_UART2ERR	41	/* UART2 Error */
+# define IRQ_UART3INTR	42	/* UART3 Interrupt (including error) */
+# define IRQ_UART3ERR	43	/* UART3 Error */
+# define IRQ_SCIINTR	44	/* Smart Card */
+# define IRQ_TSCINTR	45	/* Touchscreen */
+# define IRQ_KMIINTR	46	/* Keyboard/Mouse (PS/2) */
+# define IRQ_GPIO4INTR	47	/* -- GPIOF Interrupt */
+# define IRQ_GPIO5INTR	48
+# define IRQ_GPIO6INTR	49
+# define IRQ_GPIO7INTR	50
+# define IRQ_T3UI	51	/* Timer 3 underflow */
+# define IRQ_LCDINTR	52	/* LCD Controller */
+# define IRQ_SSPINTR	53	/* Synchronous Serial Port */
+# define IRQ_SDINTR	54	/* Secure Digital Port (MMC) */
+# define IRQ_USBINTR	55	/* USB Device Port */
+# define IRQ_USHINTR	56	/* USB Host Port */
+# define IRQ_SOFT_V2_25	57	/* -- Unassigned */
+# define IRQ_SOFT_V2_26	58
+# define IRQ_SOFT_V2_27	59
+# define IRQ_SOFT_V2_28	60
+# define IRQ_SOFT_V2_29	61
+# define IRQ_SOFT_V2_30	62
+# define IRQ_SOFT_V2_31	63
+
+# define NR_IRQ_CPU	64	/* IRQs directly recognized by CPU */
+
+	/* Given IRQ, return GPIO interrupt number 0-7 */
+# define IRQ_TO_GPIO(i)  ((i) \
+	- (((i) > IRQ_GPIO3INTR) ? IRQ_GPIO4INTR - IRQ_GPIO3INTR - 1 : 0)\
+	- IRQ_GPIO0INTR)
+
+			/* Vector Address constants */
+# define VA_VECTORED	0x100	/* Set for vectored interrupt */
+# define VA_VIC1DEFAULT	0x200	/* Set as default VECTADDR for VIC1 */
+# define VA_VIC2DEFAULT	0x400	/* Set as default VECTADDR for VIC2 */
+
+#endif
+
+  /* IRQ aliases */
+
+#if !defined (IRQ_GPIO0INTR)
+# define IRQ_GPIO0INTR	IRQ_GPIO0FIQ
+#endif
+#define IRQ_TICK	IRQ_TINTR
+#define IRQ_PCC1_RDY	IRQ_GPIO6INTR	/* PCCard 1 ready */
+#define IRQ_PCC2_RDY	IRQ_GPIO7INTR	/* PCCard 2 ready */
+#define IRQ_USB		IRQ_USBINTR	/* USB device */
+
+#ifdef CONFIG_MACH_KEV7A400
+# define IRQ_TS		IRQ_GPIOFIQ	/* Touchscreen */
+# define IRQ_CPLD	IRQ_GPIO1INTR	/* CPLD cascade */
+# define IRQ_PCC1_CD	IRQ_GPIO_F2	/* PCCard 1 card detect */
+# define IRQ_PCC2_CD	IRQ_GPIO_F3	/* PCCard 2 card detect */
+#endif
+
+#if defined (CONFIG_MACH_LPD7A400) || defined (CONFIG_MACH_LPD7A404)
+# define IRQ_CPLD_V28	IRQ_GPIO7INTR	/* CPLD cascade through GPIO_PF7 */
+# define IRQ_CPLD_V34	IRQ_GPIO3INTR	/* CPLD cascade through GPIO_PF3 */
+#endif
+
+  /* System specific IRQs */
+
+#define IRQ_BOARD_START NR_IRQ_CPU
+
+#ifdef CONFIG_MACH_KEV7A400
+# define IRQ_KEV7A400_CPLD	IRQ_BOARD_START
+# define NR_IRQ_BOARD		5
+# define IRQ_KEV7A400_MMC_CD	IRQ_KEV7A400_CPLD + 0	/* MMC Card Detect */
+# define IRQ_KEV7A400_RI2	IRQ_KEV7A400_CPLD + 1	/* Ring Indicator 2 */
+# define IRQ_KEV7A400_IDE_CF	IRQ_KEV7A400_CPLD + 2	/* Compact Flash (?) */
+# define IRQ_KEV7A400_ETH_INT	IRQ_KEV7A400_CPLD + 3	/* Ethernet chip */
+# define IRQ_KEV7A400_INT	IRQ_KEV7A400_CPLD + 4
+#endif
+
+#if defined (CONFIG_MACH_LPD7A400) || defined (CONFIG_MACH_LPD7A404)
+# define IRQ_LPD7A40X_CPLD	IRQ_BOARD_START
+# define NR_IRQ_BOARD		2
+# define IRQ_LPD7A40X_ETH_INT	IRQ_LPD7A40X_CPLD + 0	/* Ethernet chip */
+# define IRQ_LPD7A400_TS	IRQ_LPD7A40X_CPLD + 1	/* Touch screen */
+#endif
+
+#if defined (CONFIG_MACH_LPD7A400)
+# define IRQ_TOUCH		IRQ_LPD7A400_TS
+#endif
+
+#define NR_IRQS		(NR_IRQ_CPU + NR_IRQ_BOARD)
+
+#endif
diff --git a/arch/arm/mach-lh7a40x/include/mach/memory.h b/arch/arm/mach-lh7a40x/include/mach/memory.h
new file mode 100644
index 000000000000..f7107b4c197a
--- /dev/null
+++ b/arch/arm/mach-lh7a40x/include/mach/memory.h
@@ -0,0 +1,76 @@
+/* arch/arm/mach-lh7a40x/include/mach/memory.h
+ *
+ *  Copyright (C) 2004 Coastal Environmental Systems
+ *
+ *  This program is free software; you can redistribute it and/or
+ *  modify it under the terms of the GNU General Public License
+ *  version 2 as published by the Free Software Foundation.
+ *
+ *
+ *  Refer to <file:Documentation/arm/Sharp-LH/SDRAM> for more information.
+ *
+ */
+
+#ifndef __ASM_ARCH_MEMORY_H
+#define __ASM_ARCH_MEMORY_H
+
+/*
+ * Physical DRAM offset.
+ */
+#define PHYS_OFFSET	UL(0xc0000000)
+
+/*
+ * Virtual view <-> DMA view memory address translations
+ * virt_to_bus: Used to translate the virtual address to an
+ *		address suitable to be passed to set_dma_addr
+ * bus_to_virt: Used to convert an address for DMA operations
+ *		to an address that the kernel can use.
+ */
+#define __virt_to_bus(x)	 __virt_to_phys(x)
+#define __bus_to_virt(x)	 __phys_to_virt(x)
+
+#ifdef CONFIG_DISCONTIGMEM
+
+/*
+ * Given a kernel address, find the home node of the underlying memory.
+ */
+
+# ifdef CONFIG_LH7A40X_ONE_BANK_PER_NODE
+#  define KVADDR_TO_NID(addr) \
+  (  ((((unsigned long) (addr) - PAGE_OFFSET) >> 24) &  1)\
+   | ((((unsigned long) (addr) - PAGE_OFFSET) >> 25) & ~1))
+# else  /* 2 banks per node */
+#  define KVADDR_TO_NID(addr) \
+      (((unsigned long) (addr) - PAGE_OFFSET) >> 26)
+# endif
+
+/*
+ * Given a page frame number, convert it to a node id.
+ */
+
+# ifdef CONFIG_LH7A40X_ONE_BANK_PER_NODE
+#  define PFN_TO_NID(pfn) \
+  (((((pfn) - PHYS_PFN_OFFSET) >> (24 - PAGE_SHIFT)) &  1)\
+ | ((((pfn) - PHYS_PFN_OFFSET) >> (25 - PAGE_SHIFT)) & ~1))
+# else  /* 2 banks per node */
+#  define PFN_TO_NID(pfn) \
+    (((pfn) - PHYS_PFN_OFFSET) >> (26 - PAGE_SHIFT))
+#endif
+
+/*
+ * Given a kaddr, LOCAL_MEM_MAP finds the owning node of the memory
+ * and returns the index corresponding to the appropriate page in the
+ * node's mem_map.
+ */
+
+# ifdef CONFIG_LH7A40X_ONE_BANK_PER_NODE
+#  define LOCAL_MAP_NR(addr) \
+       (((unsigned long)(addr) & 0x003fffff) >> PAGE_SHIFT)
+# else  /* 2 banks per node */
+#  define LOCAL_MAP_NR(addr) \
+       (((unsigned long)(addr) & 0x01ffffff) >> PAGE_SHIFT)
+# endif
+
+#endif
+
+#endif
diff --git a/include/asm-arm/arch-lh7a40x/registers.h b/arch/arm/mach-lh7a40x/include/mach/registers.h
index b4f09b3e2d03..ea44396383a7 100644
--- a/include/asm-arm/arch-lh7a40x/registers.h
+++ b/arch/arm/mach-lh7a40x/include/mach/registers.h
@@ -1,4 +1,4 @@
-/* include/asm-arm/arch-lh7a40x/registers.h
+/* arch/arm/mach-lh7a40x/include/mach/registers.h
  *
  *  Copyright (C) 2004 Coastal Environmental Systems
  *  Copyright (C) 2004 Logic Product Development
@@ -9,7 +9,7 @@
  *
  */
 
-#include <asm/arch/constants.h>
+#include <mach/constants.h>
 
 #ifndef __ASM_ARCH_REGISTERS_H
 #define __ASM_ARCH_REGISTERS_H
diff --git a/include/asm-arm/arch-lh7a40x/ssp.h b/arch/arm/mach-lh7a40x/include/mach/ssp.h
index 132b1c4d5ce6..509916182e34 100644
--- a/include/asm-arm/arch-lh7a40x/ssp.h
+++ b/arch/arm/mach-lh7a40x/include/mach/ssp.h
@@ -1,5 +1,4 @@
 /* ssp.h
-     $Id$
 
    written by Marc Singer
    6 Dec 2004
diff --git a/arch/arm/mach-lh7a40x/include/mach/system.h b/arch/arm/mach-lh7a40x/include/mach/system.h
new file mode 100644
index 000000000000..fa46bb1ef07b
--- /dev/null
+++ b/arch/arm/mach-lh7a40x/include/mach/system.h
@@ -0,0 +1,19 @@
+/* arch/arm/mach-lh7a40x/include/mach/system.h
+ *
+ *  Copyright (C) 2004 Coastal Environmental Systems
+ *
+ *  This program is free software; you can redistribute it and/or
+ *  modify it under the terms of the GNU General Public License
+ *  version 2 as published by the Free Software Foundation.
+ *
+ */
+
+static inline void arch_idle(void)
+{
+	cpu_do_idle ();
+}
+
+static inline void arch_reset(char mode)
+{
+	cpu_reset (0);
+}
diff --git a/arch/arm/mach-lh7a40x/include/mach/timex.h b/arch/arm/mach-lh7a40x/include/mach/timex.h
new file mode 100644
index 000000000000..08028cef1b3b
--- /dev/null
+++ b/arch/arm/mach-lh7a40x/include/mach/timex.h
@@ -0,0 +1,17 @@
+/* arch/arm/mach-lh7a40x/include/mach/timex.h
+ *
+ *  Copyright (C) 2004 Coastal Environmental Systems
+ *
+ *  This program is free software; you can redistribute it and/or
+ *  modify it under the terms of the GNU General Public License
+ *  version 2 as published by the Free Software Foundation.
+ *
+ */
+
+#include <mach/constants.h>
+
+#define CLOCK_TICK_RATE		(PLL_CLOCK/6/16)
+
+/*
+#define CLOCK_TICK_RATE		3686400
+*/
diff --git a/arch/arm/mach-lh7a40x/include/mach/uncompress.h b/arch/arm/mach-lh7a40x/include/mach/uncompress.h
new file mode 100644
index 000000000000..55b80d479eb4
--- /dev/null
+++ b/arch/arm/mach-lh7a40x/include/mach/uncompress.h
@@ -0,0 +1,38 @@
+/* arch/arm/mach-lh7a40x/include/mach/uncompress.h
+ *
+ *  Copyright (C) 2004 Coastal Environmental Systems
+ *
+ *  This program is free software; you can redistribute it and/or
+ *  modify it under the terms of the GNU General Public License
+ *  version 2 as published by the Free Software Foundation.
+ *
+ */
+
+#include <mach/registers.h>
+
+#ifndef UART_R_DATA
+# define UART_R_DATA	(0x00)
+#endif
+#ifndef UART_R_STATUS
+# define UART_R_STATUS	(0x10)
+#endif
+#define nTxRdy		(0x20)	/* Not TxReady (literally Tx FIFO full) */
+
+	/* Access UART with physical addresses before MMU is setup */
+#define UART_STATUS (*(volatile unsigned long*) (UART2_PHYS + UART_R_STATUS))
+#define UART_DATA   (*(volatile unsigned long*) (UART2_PHYS + UART_R_DATA))
+
+static inline void putc(int ch)
+{
+	while (UART_STATUS & nTxRdy)
+		barrier();
+	UART_DATA = ch;
+}
+
+static inline void flush(void)
+{
+}
+
+	/* NULL functions; we don't presently need them */
+#define arch_decomp_setup()
+#define arch_decomp_wdog()
diff --git a/arch/arm/mach-lh7a40x/include/mach/vmalloc.h b/arch/arm/mach-lh7a40x/include/mach/vmalloc.h
new file mode 100644
index 000000000000..3fbd49490bb9
--- /dev/null
+++ b/arch/arm/mach-lh7a40x/include/mach/vmalloc.h
@@ -0,0 +1,10 @@
+/* arch/arm/mach-lh7a40x/include/mach/vmalloc.h
+ *
+ *  Copyright (C) 2004 Coastal Environmental Systems
+ *
+ *  This program is free software; you can redistribute it and/or
+ *  modify it under the terms of the GNU General Public License
+ *  version 2 as published by the Free Software Foundation.
+ *
+ */
+#define VMALLOC_END       (0xe8000000)
diff --git a/arch/arm/mach-lh7a40x/irq-lh7a400.c b/arch/arm/mach-lh7a40x/irq-lh7a400.c
index 9472bbebd8ab..1ad3afcf6b3d 100644
--- a/arch/arm/mach-lh7a40x/irq-lh7a400.c
+++ b/arch/arm/mach-lh7a40x/irq-lh7a400.c
@@ -12,10 +12,10 @@
 #include <linux/module.h>
 #include <linux/interrupt.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/irq.h>
 #include <asm/mach/irq.h>
-#include <asm/arch/irqs.h>
+#include <mach/irqs.h>
 
 #include "common.h"
 
diff --git a/arch/arm/mach-lh7a40x/irq-lh7a404.c b/arch/arm/mach-lh7a40x/irq-lh7a404.c
index 9b28389035e6..12b045b688c6 100644
--- a/arch/arm/mach-lh7a40x/irq-lh7a404.c
+++ b/arch/arm/mach-lh7a40x/irq-lh7a404.c
@@ -12,10 +12,10 @@
 #include <linux/module.h>
 #include <linux/interrupt.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/irq.h>
 #include <asm/mach/irq.h>
-#include <asm/arch/irqs.h>
+#include <mach/irqs.h>
 
 #include "common.h"
 
diff --git a/arch/arm/mach-lh7a40x/irq-lpd7a40x.c b/arch/arm/mach-lh7a40x/irq-lpd7a40x.c
index 66e1ed3961ea..0d5063ebda10 100644
--- a/arch/arm/mach-lh7a40x/irq-lpd7a40x.c
+++ b/arch/arm/mach-lh7a40x/irq-lpd7a40x.c
@@ -13,10 +13,10 @@
 #include <linux/module.h>
 #include <linux/interrupt.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/irq.h>
 #include <asm/mach/irq.h>
-#include <asm/arch/irqs.h>
+#include <mach/irqs.h>
 
 #include "common.h"
 
diff --git a/arch/arm/mach-lh7a40x/lcd-panel.h b/arch/arm/mach-lh7a40x/lcd-panel.h
index df6e38ed425b..a7f5027b2f78 100644
--- a/arch/arm/mach-lh7a40x/lcd-panel.h
+++ b/arch/arm/mach-lh7a40x/lcd-panel.h
@@ -1,5 +1,4 @@
 /* lcd-panel.h
-     $Id$
 
    written by Marc Singer
    18 Jul 2005
diff --git a/arch/arm/mach-lh7a40x/ssp-cpld.c b/arch/arm/mach-lh7a40x/ssp-cpld.c
index a10830186dac..51fbef9601b9 100644
--- a/arch/arm/mach-lh7a40x/ssp-cpld.c
+++ b/arch/arm/mach-lh7a40x/ssp-cpld.c
@@ -46,9 +46,9 @@
 
 #include <asm/io.h>
 #include <asm/irq.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 
-#include <asm/arch/ssp.h>
+#include <mach/ssp.h>
 
 //#define TALK
 
diff --git a/arch/arm/mach-lh7a40x/time.c b/arch/arm/mach-lh7a40x/time.c
index e50e60b33851..7fe9e06cf662 100644
--- a/arch/arm/mach-lh7a40x/time.c
+++ b/arch/arm/mach-lh7a40x/time.c
@@ -14,7 +14,7 @@
 #include <linux/irq.h>
 #include <linux/time.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 #include <asm/irq.h>
 #include <asm/leds.h>
diff --git a/arch/arm/mach-loki/addr-map.c b/arch/arm/mach-loki/addr-map.c
index ba25e56ade58..70ca56bb6f33 100644
--- a/arch/arm/mach-loki/addr-map.c
+++ b/arch/arm/mach-loki/addr-map.c
@@ -11,7 +11,7 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/mbus.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 #include "common.h"
 
diff --git a/arch/arm/mach-loki/common.c b/arch/arm/mach-loki/common.c
index 410f50399dd3..c0d2d9d12e74 100644
--- a/arch/arm/mach-loki/common.c
+++ b/arch/arm/mach-loki/common.c
@@ -18,9 +18,9 @@
 #include <asm/timex.h>
 #include <asm/mach/map.h>
 #include <asm/mach/time.h>
-#include <asm/arch/loki.h>
-#include <asm/plat-orion/orion_nand.h>
-#include <asm/plat-orion/time.h>
+#include <mach/loki.h>
+#include <plat/orion_nand.h>
+#include <plat/time.h>
 #include "common.h"
 
 /*****************************************************************************
diff --git a/arch/arm/mach-loki/include/mach/debug-macro.S b/arch/arm/mach-loki/include/mach/debug-macro.S
new file mode 100644
index 000000000000..a8c20bd2f951
--- /dev/null
+++ b/arch/arm/mach-loki/include/mach/debug-macro.S
@@ -0,0 +1,20 @@
+/*
+ * arch/arm/mach-loki/include/mach/debug-macro.S
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <mach/loki.h>
+
+	.macro	addruart,rx
+	mrc	p15, 0, \rx, c1, c0
+	tst	\rx, #1					@ MMU enabled?
+	ldreq	\rx, =LOKI_REGS_PHYS_BASE
+	ldrne	\rx, =LOKI_REGS_VIRT_BASE
+	orr	\rx, \rx, #0x00012000
+	.endm
+
+#define UART_SHIFT	2
+#include <asm/hardware/debug-8250.S>
diff --git a/include/asm-arm/arch-loki/dma.h b/arch/arm/mach-loki/include/mach/dma.h
index 40a8c178f10d..40a8c178f10d 100644
--- a/include/asm-arm/arch-loki/dma.h
+++ b/arch/arm/mach-loki/include/mach/dma.h
diff --git a/arch/arm/mach-loki/include/mach/entry-macro.S b/arch/arm/mach-loki/include/mach/entry-macro.S
new file mode 100644
index 000000000000..332af38ec13c
--- /dev/null
+++ b/arch/arm/mach-loki/include/mach/entry-macro.S
@@ -0,0 +1,30 @@
+/*
+ * arch/arm/mach-loki/include/mach/entry-macro.S
+ *
+ * Low-level IRQ helper macros for Marvell Loki (88RC8480) platforms
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <mach/loki.h>
+
+	.macro  disable_fiq
+	.endm
+
+	.macro  arch_ret_to_user, tmp1, tmp2
+	.endm
+
+	.macro  get_irqnr_preamble, base, tmp
+	ldr	\base, =IRQ_VIRT_BASE
+	.endm
+
+	.macro  get_irqnr_and_base, irqnr, irqstat, base, tmp
+	ldr	\irqstat, [\base, #IRQ_CAUSE_OFF]
+	ldr	\tmp, [\base, #IRQ_MASK_OFF]
+	mov	\irqnr, #0
+	ands	\irqstat, \irqstat, \tmp
+	clzne	\irqnr, \irqstat
+	rsbne	\irqnr, \irqnr, #31
+	.endm
diff --git a/arch/arm/mach-loki/include/mach/hardware.h b/arch/arm/mach-loki/include/mach/hardware.h
new file mode 100644
index 000000000000..d7bfc8f17729
--- /dev/null
+++ b/arch/arm/mach-loki/include/mach/hardware.h
@@ -0,0 +1,15 @@
+/*
+ * arch/arm/mach-loki/include/mach/hardware.h
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_HARDWARE_H
+#define __ASM_ARCH_HARDWARE_H
+
+#include "loki.h"
+
+
+#endif
diff --git a/arch/arm/mach-loki/include/mach/io.h b/arch/arm/mach-loki/include/mach/io.h
new file mode 100644
index 000000000000..a373cd582c84
--- /dev/null
+++ b/arch/arm/mach-loki/include/mach/io.h
@@ -0,0 +1,26 @@
+/*
+ * arch/arm/mach-loki/include/mach/io.h
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __ASM_ARCH_IO_H
+#define __ASM_ARCH_IO_H
+
+#include "loki.h"
+
+#define IO_SPACE_LIMIT		0xffffffff
+
+static inline void __iomem *__io(unsigned long addr)
+{
+	return (void __iomem *)((addr - LOKI_PCIE0_IO_PHYS_BASE)
+					+ LOKI_PCIE0_IO_VIRT_BASE);
+}
+
+#define __io(a)			__io(a)
+#define __mem_pci(a)		(a)
+
+
+#endif
diff --git a/arch/arm/mach-loki/include/mach/irqs.h b/arch/arm/mach-loki/include/mach/irqs.h
new file mode 100644
index 000000000000..9fbd3326867b
--- /dev/null
+++ b/arch/arm/mach-loki/include/mach/irqs.h
@@ -0,0 +1,58 @@
+/*
+ * arch/arm/mach-loki/include/mach/irqs.h
+ *
+ * IRQ definitions for Marvell Loki (88RC8480) SoCs
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __ASM_ARCH_IRQS_H
+#define __ASM_ARCH_IRQS_H
+
+#include "loki.h"	/* need GPIO_MAX */
+
+/*
+ * Interrupt Controller
+ */
+#define IRQ_LOKI_PCIE_A_CPU_DRBL	0
+#define IRQ_LOKI_CPU_PCIE_A_DRBL	1
+#define IRQ_LOKI_PCIE_B_CPU_DRBL	2
+#define IRQ_LOKI_CPU_PCIE_B_DRBL	3
+#define IRQ_LOKI_COM_A_ERR		6
+#define IRQ_LOKI_COM_A_IN		7
+#define IRQ_LOKI_COM_A_OUT		8
+#define IRQ_LOKI_COM_B_ERR		9
+#define IRQ_LOKI_COM_B_IN		10
+#define IRQ_LOKI_COM_B_OUT		11
+#define IRQ_LOKI_DMA_A			12
+#define IRQ_LOKI_DMA_B			13
+#define IRQ_LOKI_SAS_A			14
+#define IRQ_LOKI_SAS_B			15
+#define IRQ_LOKI_DDR			16
+#define IRQ_LOKI_XOR			17
+#define IRQ_LOKI_BRIDGE			18
+#define IRQ_LOKI_PCIE_A_ERR		20
+#define IRQ_LOKI_PCIE_A_INT		21
+#define IRQ_LOKI_PCIE_B_ERR		22
+#define IRQ_LOKI_PCIE_B_INT		23
+#define IRQ_LOKI_GBE_A_INT		24
+#define IRQ_LOKI_GBE_B_INT		25
+#define IRQ_LOKI_DEV_ERR		26
+#define IRQ_LOKI_UART0			27
+#define IRQ_LOKI_UART1			28
+#define IRQ_LOKI_TWSI			29
+#define IRQ_LOKI_GPIO_23_0		30
+#define IRQ_LOKI_GPIO_25_24		31
+
+/*
+ * Loki General Purpose Pins
+ */
+#define IRQ_LOKI_GPIO_START	32
+#define NR_GPIO_IRQS		GPIO_MAX
+
+#define NR_IRQS			(IRQ_LOKI_GPIO_START + NR_GPIO_IRQS)
+
+
+#endif
diff --git a/include/asm-arm/arch-loki/loki.h b/arch/arm/mach-loki/include/mach/loki.h
index 5dd05ee0a4e6..c00af6ba5578 100644
--- a/include/asm-arm/arch-loki/loki.h
+++ b/arch/arm/mach-loki/include/mach/loki.h
@@ -1,5 +1,5 @@
 /*
- * include/asm-arm/arch-loki/loki.h
+ * arch/arm/mach-loki/include/mach/loki.h
  *
  * Generic definitions for Marvell Loki (88RC8480) SoC flavors
  *
diff --git a/arch/arm/mach-loki/include/mach/memory.h b/arch/arm/mach-loki/include/mach/memory.h
new file mode 100644
index 000000000000..a39533ab489d
--- /dev/null
+++ b/arch/arm/mach-loki/include/mach/memory.h
@@ -0,0 +1,14 @@
+/*
+ * arch/arm/mach-loki/include/mach/memory.h
+ */
+
+#ifndef __ASM_ARCH_MEMORY_H
+#define __ASM_ARCH_MEMORY_H
+
+#define PHYS_OFFSET		UL(0x00000000)
+
+#define __virt_to_bus(x)	__virt_to_phys(x)
+#define __bus_to_virt(x)	__phys_to_virt(x)
+
+
+#endif
diff --git a/arch/arm/mach-loki/include/mach/system.h b/arch/arm/mach-loki/include/mach/system.h
new file mode 100644
index 000000000000..8db1147d4ec5
--- /dev/null
+++ b/arch/arm/mach-loki/include/mach/system.h
@@ -0,0 +1,37 @@
+/*
+ * arch/arm/mach-loki/include/mach/system.h
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __ASM_ARCH_SYSTEM_H
+#define __ASM_ARCH_SYSTEM_H
+
+#include <mach/hardware.h>
+#include <mach/loki.h>
+
+static inline void arch_idle(void)
+{
+	cpu_do_idle();
+}
+
+static inline void arch_reset(char mode)
+{
+	/*
+	 * Enable soft reset to assert RSTOUTn.
+	 */
+	writel(SOFT_RESET_OUT_EN, RSTOUTn_MASK);
+
+	/*
+	 * Assert soft reset.
+	 */
+	writel(SOFT_RESET, SYSTEM_SOFT_RESET);
+
+	while (1)
+		;
+}
+
+
+#endif
diff --git a/arch/arm/mach-loki/include/mach/timex.h b/arch/arm/mach-loki/include/mach/timex.h
new file mode 100644
index 000000000000..9df210915297
--- /dev/null
+++ b/arch/arm/mach-loki/include/mach/timex.h
@@ -0,0 +1,11 @@
+/*
+ * arch/arm/mach-loki/include/mach/timex.h
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#define CLOCK_TICK_RATE		(100 * HZ)
+
+#define LOKI_TCLK		180000000
diff --git a/arch/arm/mach-loki/include/mach/uncompress.h b/arch/arm/mach-loki/include/mach/uncompress.h
new file mode 100644
index 000000000000..90b2a7e65da3
--- /dev/null
+++ b/arch/arm/mach-loki/include/mach/uncompress.h
@@ -0,0 +1,47 @@
+/*
+ * arch/arm/mach-loki/include/mach/uncompress.h
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/serial_reg.h>
+#include <mach/loki.h>
+
+#define SERIAL_BASE	((unsigned char *)UART0_PHYS_BASE)
+
+static void putc(const char c)
+{
+	unsigned char *base = SERIAL_BASE;
+	int i;
+
+	for (i = 0; i < 0x1000; i++) {
+		if (base[UART_LSR << 2] & UART_LSR_THRE)
+			break;
+		barrier();
+	}
+
+	base[UART_TX << 2] = c;
+}
+
+static void flush(void)
+{
+	unsigned char *base = SERIAL_BASE;
+	unsigned char mask;
+	int i;
+
+	mask = UART_LSR_TEMT | UART_LSR_THRE;
+
+	for (i = 0; i < 0x1000; i++) {
+		if ((base[UART_LSR << 2] & mask) == mask)
+			break;
+		barrier();
+	}
+}
+
+/*
+ * nothing to do
+ */
+#define arch_decomp_setup()
+#define arch_decomp_wdog()
diff --git a/arch/arm/mach-loki/include/mach/vmalloc.h b/arch/arm/mach-loki/include/mach/vmalloc.h
new file mode 100644
index 000000000000..8dc3bfcbf9f0
--- /dev/null
+++ b/arch/arm/mach-loki/include/mach/vmalloc.h
@@ -0,0 +1,5 @@
+/*
+ * arch/arm/mach-loki/include/mach/vmalloc.h
+ */
+
+#define VMALLOC_END	0xfe800000
diff --git a/arch/arm/mach-loki/irq.c b/arch/arm/mach-loki/irq.c
index d839af91fe03..5a487930cb2f 100644
--- a/arch/arm/mach-loki/irq.c
+++ b/arch/arm/mach-loki/irq.c
@@ -12,7 +12,7 @@
 #include <linux/init.h>
 #include <linux/irq.h>
 #include <asm/io.h>
-#include <asm/plat-orion/irq.h>
+#include <plat/irq.h>
 #include "common.h"
 
 void __init loki_init_irq(void)
diff --git a/arch/arm/mach-loki/lb88rc8480-setup.c b/arch/arm/mach-loki/lb88rc8480-setup.c
index d1b9e6e6253a..2cc9ac9b488f 100644
--- a/arch/arm/mach-loki/lb88rc8480-setup.c
+++ b/arch/arm/mach-loki/lb88rc8480-setup.c
@@ -19,7 +19,7 @@
 #include <linux/mv643xx_eth.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
-#include <asm/arch/loki.h>
+#include <mach/loki.h>
 #include "common.h"
 
 #define LB88RC8480_FLASH_BOOT_CS_BASE	0xf8000000
diff --git a/arch/arm/mach-msm/board-halibut.c b/arch/arm/mach-msm/board-halibut.c
index 86dfb2b5261c..995afc4ade4b 100644
--- a/arch/arm/mach-msm/board-halibut.c
+++ b/arch/arm/mach-msm/board-halibut.c
@@ -19,14 +19,14 @@
 #include <linux/platform_device.h>
 #include <linux/input.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 #include <asm/mach/flash.h>
 
-#include <asm/arch/board.h>
-#include <asm/arch/msm_iomap.h>
+#include <mach/board.h>
+#include <mach/msm_iomap.h>
 
 #include <asm/io.h>
 #include <asm/delay.h>
diff --git a/arch/arm/mach-msm/common.c b/arch/arm/mach-msm/common.c
index 3f5d3362f887..3a511368a5d8 100644
--- a/arch/arm/mach-msm/common.c
+++ b/arch/arm/mach-msm/common.c
@@ -28,9 +28,9 @@
 #include <linux/mtd/nand.h>
 #include <linux/mtd/partitions.h>
 
-#include <asm/arch/msm_iomap.h>
+#include <mach/msm_iomap.h>
 
-#include <asm/arch/board.h>
+#include <mach/board.h>
 
 struct flash_platform_data msm_nand_data = {
 	.parts		= 0,
diff --git a/arch/arm/mach-msm/dma.c b/arch/arm/mach-msm/dma.c
index 8b0f339b3274..9de08265d974 100644
--- a/arch/arm/mach-msm/dma.c
+++ b/arch/arm/mach-msm/dma.c
@@ -15,7 +15,7 @@
 
 #include <asm/io.h>
 #include <linux/interrupt.h>
-#include <asm/arch/dma.h>
+#include <mach/dma.h>
 
 #define MSM_DMOV_CHANNEL_COUNT 16
 
diff --git a/arch/arm/mach-msm/idle.S b/arch/arm/mach-msm/idle.S
index 2b1cb7f16943..6a94f0527137 100644
--- a/arch/arm/mach-msm/idle.S
+++ b/arch/arm/mach-msm/idle.S
@@ -1,4 +1,4 @@
-/* linux/include/asm-arm/arch-msm/idle.S
+/* arch/arm/mach-msm/include/mach/idle.S
  *
  * Idle processing for MSM7K - work around bugs with SWFI.
  *
diff --git a/arch/arm/mach-msm/include/mach/board.h b/arch/arm/mach-msm/include/mach/board.h
new file mode 100644
index 000000000000..a7639493c095
--- /dev/null
+++ b/arch/arm/mach-msm/include/mach/board.h
@@ -0,0 +1,37 @@
+/* arch/arm/mach-msm/include/mach/board.h
+ *
+ * Copyright (C) 2007 Google, Inc.
+ * Author: Brian Swetland <swetland@google.com>
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#ifndef __ASM_ARCH_MSM_BOARD_H
+#define __ASM_ARCH_MSM_BOARD_H
+
+#include <linux/types.h>
+
+/* platform device data structures */
+
+struct msm_mddi_platform_data
+{
+	void (*panel_power)(int on);
+	unsigned has_vsync_irq:1;
+};
+
+/* common init routines for use by arch/arm/mach-msm/board-*.c */
+
+void __init msm_add_devices(void);
+void __init msm_map_common_io(void);
+void __init msm_init_irq(void);
+void __init msm_init_gpio(void);
+
+#endif
diff --git a/arch/arm/mach-msm/include/mach/debug-macro.S b/arch/arm/mach-msm/include/mach/debug-macro.S
new file mode 100644
index 000000000000..528eef4b605c
--- /dev/null
+++ b/arch/arm/mach-msm/include/mach/debug-macro.S
@@ -0,0 +1,40 @@
+/* arch/arm/mach-msm7200/include/mach/debug-macro.S
+ *
+ * Copyright (C) 2007 Google, Inc.
+ * Author: Brian Swetland <swetland@google.com>
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <mach/hardware.h>
+#include <mach/msm_iomap.h>
+
+	.macro	addruart,rx
+	@ see if the MMU is enabled and select appropriate base address
+	mrc	p15, 0, \rx, c1, c0
+	tst	\rx, #1
+	ldreq	\rx, =MSM_UART1_PHYS
+	ldrne	\rx, =MSM_UART1_BASE
+	.endm
+
+	.macro	senduart,rd,rx
+	str	\rd, [\rx, #0x0C]
+	.endm
+
+	.macro	waituart,rd,rx
+	@ wait for TX_READY
+1:	ldr	\rd, [\rx, #0x08]
+	tst	\rd, #0x04
+	beq	1b
+	.endm
+
+	.macro	busyuart,rd,rx
+	.endm
diff --git a/arch/arm/mach-msm/include/mach/dma.h b/arch/arm/mach-msm/include/mach/dma.h
new file mode 100644
index 000000000000..ad1c87f86d10
--- /dev/null
+++ b/arch/arm/mach-msm/include/mach/dma.h
@@ -0,0 +1,151 @@
+/* arch/arm/mach-msm/include/mach/dma.h
+ *
+ * Copyright (C) 2007 Google, Inc.
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#ifndef __ASM_ARCH_MSM_DMA_H
+
+#include <linux/list.h>
+#include <mach/msm_iomap.h>
+
+struct msm_dmov_cmd {
+	struct list_head list;
+	unsigned int cmdptr;
+	void (*complete_func)(struct msm_dmov_cmd *cmd, unsigned int result);
+/*	void (*user_result_func)(struct msm_dmov_cmd *cmd); */
+};
+
+void msm_dmov_enqueue_cmd(unsigned id, struct msm_dmov_cmd *cmd);
+void msm_dmov_stop_cmd(unsigned id, struct msm_dmov_cmd *cmd);
+int msm_dmov_exec_cmd(unsigned id, unsigned int cmdptr);
+/* int msm_dmov_exec_cmd_etc(unsigned id, unsigned int cmdptr, int timeout, int interruptible); */
+
+
+
+#define DMOV_SD0(off, ch) (MSM_DMOV_BASE + 0x0000 + (off) + ((ch) << 2))
+#define DMOV_SD1(off, ch) (MSM_DMOV_BASE + 0x0400 + (off) + ((ch) << 2))
+#define DMOV_SD2(off, ch) (MSM_DMOV_BASE + 0x0800 + (off) + ((ch) << 2))
+#define DMOV_SD3(off, ch) (MSM_DMOV_BASE + 0x0C00 + (off) + ((ch) << 2))
+
+/* only security domain 3 is available to the ARM11
+ * SD0 -> mARM trusted, SD1 -> mARM nontrusted, SD2 -> aDSP, SD3 -> aARM
+ */
+
+#define DMOV_CMD_PTR(ch)      DMOV_SD3(0x000, ch)
+#define DMOV_CMD_LIST         (0 << 29) /* does not work */
+#define DMOV_CMD_PTR_LIST     (1 << 29) /* works */
+#define DMOV_CMD_INPUT_CFG    (2 << 29) /* untested */
+#define DMOV_CMD_OUTPUT_CFG   (3 << 29) /* untested */
+#define DMOV_CMD_ADDR(addr)   ((addr) >> 3)
+
+#define DMOV_RSLT(ch)         DMOV_SD3(0x040, ch)
+#define DMOV_RSLT_VALID       (1 << 31) /* 0 == host has empties result fifo */
+#define DMOV_RSLT_ERROR       (1 << 3)
+#define DMOV_RSLT_FLUSH       (1 << 2)
+#define DMOV_RSLT_DONE        (1 << 1)  /* top pointer done */
+#define DMOV_RSLT_USER        (1 << 0)  /* command with FR force result */
+
+#define DMOV_FLUSH0(ch)       DMOV_SD3(0x080, ch)
+#define DMOV_FLUSH1(ch)       DMOV_SD3(0x0C0, ch)
+#define DMOV_FLUSH2(ch)       DMOV_SD3(0x100, ch)
+#define DMOV_FLUSH3(ch)       DMOV_SD3(0x140, ch)
+#define DMOV_FLUSH4(ch)       DMOV_SD3(0x180, ch)
+#define DMOV_FLUSH5(ch)       DMOV_SD3(0x1C0, ch)
+
+#define DMOV_STATUS(ch)       DMOV_SD3(0x200, ch)
+#define DMOV_STATUS_RSLT_COUNT(n)    (((n) >> 29))
+#define DMOV_STATUS_CMD_COUNT(n)     (((n) >> 27) & 3)
+#define DMOV_STATUS_RSLT_VALID       (1 << 1)
+#define DMOV_STATUS_CMD_PTR_RDY      (1 << 0)
+
+#define DMOV_ISR              DMOV_SD3(0x380, 0)
+
+#define DMOV_CONFIG(ch)       DMOV_SD3(0x300, ch)
+#define DMOV_CONFIG_FORCE_TOP_PTR_RSLT (1 << 2)
+#define DMOV_CONFIG_FORCE_FLUSH_RSLT   (1 << 1)
+#define DMOV_CONFIG_IRQ_EN             (1 << 0)
+
+/* channel assignments */
+
+#define DMOV_NAND_CHAN        7
+#define DMOV_NAND_CRCI_CMD    5
+#define DMOV_NAND_CRCI_DATA   4
+
+#define DMOV_SDC1_CHAN        8
+#define DMOV_SDC1_CRCI        6
+
+#define DMOV_SDC2_CHAN        8
+#define DMOV_SDC2_CRCI        7
+
+#define DMOV_TSIF_CHAN        10
+#define DMOV_TSIF_CRCI        10
+
+#define DMOV_USB_CHAN         11
+
+/* no client rate control ifc (eg, ram) */
+#define DMOV_NONE_CRCI        0
+
+
+/* If the CMD_PTR register has CMD_PTR_LIST selected, the data mover
+ * is going to walk a list of 32bit pointers as described below.  Each
+ * pointer points to a *array* of dmov_s, etc structs.  The last pointer
+ * in the list is marked with CMD_PTR_LP.  The last struct in each array
+ * is marked with CMD_LC (see below).
+ */
+#define CMD_PTR_ADDR(addr)  ((addr) >> 3)
+#define CMD_PTR_LP          (1 << 31) /* last pointer */
+#define CMD_PTR_PT          (3 << 29) /* ? */
+
+/* Single Item Mode */
+typedef struct {
+	unsigned cmd;
+	unsigned src;
+	unsigned dst;
+	unsigned len;
+} dmov_s;
+
+/* Scatter/Gather Mode */
+typedef struct {
+	unsigned cmd;
+	unsigned src_dscr;
+	unsigned dst_dscr;
+	unsigned _reserved;
+} dmov_sg;
+
+/* bits for the cmd field of the above structures */
+
+#define CMD_LC      (1 << 31)  /* last command */
+#define CMD_FR      (1 << 22)  /* force result -- does not work? */
+#define CMD_OCU     (1 << 21)  /* other channel unblock */
+#define CMD_OCB     (1 << 20)  /* other channel block */
+#define CMD_TCB     (1 << 19)  /* ? */
+#define CMD_DAH     (1 << 18)  /* destination address hold -- does not work?*/
+#define CMD_SAH     (1 << 17)  /* source address hold -- does not work? */
+
+#define CMD_MODE_SINGLE     (0 << 0) /* dmov_s structure used */
+#define CMD_MODE_SG         (1 << 0) /* untested */
+#define CMD_MODE_IND_SG     (2 << 0) /* untested */
+#define CMD_MODE_BOX        (3 << 0) /* untested */
+
+#define CMD_DST_SWAP_BYTES  (1 << 14) /* exchange each byte n with byte n+1 */
+#define CMD_DST_SWAP_SHORTS (1 << 15) /* exchange each short n with short n+1 */
+#define CMD_DST_SWAP_WORDS  (1 << 16) /* exchange each word n with word n+1 */
+
+#define CMD_SRC_SWAP_BYTES  (1 << 11) /* exchange each byte n with byte n+1 */
+#define CMD_SRC_SWAP_SHORTS (1 << 12) /* exchange each short n with short n+1 */
+#define CMD_SRC_SWAP_WORDS  (1 << 13) /* exchange each word n with word n+1 */
+
+#define CMD_DST_CRCI(n)     (((n) & 15) << 7)
+#define CMD_SRC_CRCI(n)     (((n) & 15) << 3)
+
+#endif
diff --git a/arch/arm/mach-msm/include/mach/entry-macro.S b/arch/arm/mach-msm/include/mach/entry-macro.S
new file mode 100644
index 000000000000..d2259486bcb1
--- /dev/null
+++ b/arch/arm/mach-msm/include/mach/entry-macro.S
@@ -0,0 +1,38 @@
+/* arch/arm/mach-msm7200/include/mach/entry-macro.S
+ *
+ * Copyright (C) 2007 Google, Inc.
+ * Author: Brian Swetland <swetland@google.com>
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <mach/msm_iomap.h>
+
+ 	.macro	disable_fiq
+	.endm
+
+	.macro	get_irqnr_preamble, base, tmp
+	@ enable imprecise aborts
+	cpsie	a
+	mov	\base, #MSM_VIC_BASE
+	.endm
+
+	.macro	arch_ret_to_user, tmp1, tmp2
+	.endm
+
+	.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
+	@ 0xD0 has irq# or old irq# if the irq has been handled
+	@ 0xD4 has irq# or -1 if none pending *but* if you just
+	@ read 0xD4 you never get the first irq for some reason
+	ldr	\irqnr, [\base, #0xD0]
+	ldr	\irqnr, [\base, #0xD4]
+	cmp	\irqnr, #0xffffffff
+	.endm
diff --git a/arch/arm/mach-msm/include/mach/hardware.h b/arch/arm/mach-msm/include/mach/hardware.h
new file mode 100644
index 000000000000..2d126091ae41
--- /dev/null
+++ b/arch/arm/mach-msm/include/mach/hardware.h
@@ -0,0 +1,18 @@
+/* arch/arm/mach-msm/include/mach/hardware.h
+ *
+ * Copyright (C) 2007 Google, Inc.
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#ifndef __ASM_ARCH_MSM_HARDWARE_H
+
+#endif
diff --git a/arch/arm/mach-msm/include/mach/io.h b/arch/arm/mach-msm/include/mach/io.h
new file mode 100644
index 000000000000..c6a2feb268b0
--- /dev/null
+++ b/arch/arm/mach-msm/include/mach/io.h
@@ -0,0 +1,33 @@
+/* arch/arm/mach-msm/include/mach/io.h
+ *
+ * Copyright (C) 2007 Google, Inc.
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#ifndef __ASM_ARM_ARCH_IO_H
+#define __ASM_ARM_ARCH_IO_H
+
+#define IO_SPACE_LIMIT 0xffffffff
+
+#define __arch_ioremap __msm_ioremap
+#define __arch_iounmap __iounmap
+
+void __iomem *__msm_ioremap(unsigned long phys_addr, size_t size, unsigned int mtype);
+
+static inline void __iomem *__io(unsigned long addr)
+{
+	return (void __iomem *)addr;
+}
+#define __io(a)         __io(a)
+#define __mem_pci(a)    (a)
+
+#endif
diff --git a/arch/arm/mach-msm/include/mach/irqs.h b/arch/arm/mach-msm/include/mach/irqs.h
new file mode 100644
index 000000000000..9dd4cf8a2693
--- /dev/null
+++ b/arch/arm/mach-msm/include/mach/irqs.h
@@ -0,0 +1,90 @@
+/* arch/arm/mach-msm/include/mach/irqs.h
+ *
+ * Copyright (C) 2007 Google, Inc.
+ * Author: Brian Swetland <swetland@google.com>
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#ifndef __ASM_ARCH_MSM_IRQS_H
+#define __ASM_ARCH_MSM_IRQS_H
+
+/* MSM ARM11 Interrupt Numbers */
+/* See 80-VE113-1 A, pp219-221     */
+
+#define INT_A9_M2A_0         0
+#define INT_A9_M2A_1         1
+#define INT_A9_M2A_2         2
+#define INT_A9_M2A_3         3
+#define INT_A9_M2A_4         4
+#define INT_A9_M2A_5         5
+#define INT_A9_M2A_6         6
+#define INT_GP_TIMER_EXP     7
+#define INT_DEBUG_TIMER_EXP  8
+#define INT_UART1            9
+#define INT_UART2            10
+#define INT_UART3            11
+#define INT_UART1_RX         12
+#define INT_UART2_RX         13
+#define INT_UART3_RX         14
+#define INT_USB_OTG          15
+#define INT_MDDI_PRI         16
+#define INT_MDDI_EXT         17
+#define INT_MDDI_CLIENT      18
+#define INT_MDP              19
+#define INT_GRAPHICS         20
+#define INT_ADM_AARM         21
+#define INT_ADSP_A11         22
+#define INT_ADSP_A9_A11      23
+#define INT_SDC1_0           24
+#define INT_SDC1_1           25
+#define INT_SDC2_0           26
+#define INT_SDC2_1           27
+#define INT_KEYSENSE         28
+#define INT_TCHSCRN_SSBI     29
+#define INT_TCHSCRN1         30
+#define INT_TCHSCRN2         31
+
+#define INT_GPIO_GROUP1      (32 + 0)
+#define INT_GPIO_GROUP2      (32 + 1)
+#define INT_PWB_I2C          (32 + 2)
+#define INT_SOFTRESET        (32 + 3)
+#define INT_NAND_WR_ER_DONE  (32 + 4)
+#define INT_NAND_OP_DONE     (32 + 5)
+#define INT_PBUS_ARM11       (32 + 6)
+#define INT_AXI_MPU_SMI      (32 + 7)
+#define INT_AXI_MPU_EBI1     (32 + 8)
+#define INT_AD_HSSD          (32 + 9)
+#define INT_ARM11_PMU        (32 + 10)
+#define INT_ARM11_DMA        (32 + 11)
+#define INT_TSIF_IRQ         (32 + 12)
+#define INT_UART1DM_IRQ      (32 + 13)
+#define INT_UART1DM_RX       (32 + 14)
+#define INT_USB_HS           (32 + 15)
+#define INT_SDC3_0           (32 + 16)
+#define INT_SDC3_1           (32 + 17)
+#define INT_SDC4_0           (32 + 18)
+#define INT_SDC4_1           (32 + 19)
+#define INT_UART2DM_RX       (32 + 20)
+#define INT_UART2DM_IRQ      (32 + 21)
+
+/* 22-31 are reserved */
+
+#define MSM_IRQ_BIT(irq)     (1 << ((irq) & 31))
+
+#define NR_MSM_IRQS 64
+#define NR_GPIO_IRQS 122
+#define NR_BOARD_IRQS 64
+#define NR_IRQS (NR_MSM_IRQS + NR_GPIO_IRQS + NR_BOARD_IRQS)
+
+#define MSM_GPIO_TO_INT(n) (NR_MSM_IRQS + (n))
+
+#endif
diff --git a/arch/arm/mach-msm/include/mach/memory.h b/arch/arm/mach-msm/include/mach/memory.h
new file mode 100644
index 000000000000..63fd47f2e62e
--- /dev/null
+++ b/arch/arm/mach-msm/include/mach/memory.h
@@ -0,0 +1,27 @@
+/* arch/arm/mach-msm/include/mach/memory.h
+ *
+ * Copyright (C) 2007 Google, Inc.
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#ifndef __ASM_ARCH_MEMORY_H
+#define __ASM_ARCH_MEMORY_H
+
+/* physical offset of RAM */
+#define PHYS_OFFSET		UL(0x10000000)
+
+/* bus address and physical addresses are identical */
+#define __virt_to_bus(x)	__virt_to_phys(x)
+#define __bus_to_virt(x)	__phys_to_virt(x)
+
+#endif
+
diff --git a/include/asm-arm/arch-msm/msm_iomap.h b/arch/arm/mach-msm/include/mach/msm_iomap.h
index b8955cc26fec..e221f58ceea3 100644
--- a/include/asm-arm/arch-msm/msm_iomap.h
+++ b/arch/arm/mach-msm/include/mach/msm_iomap.h
@@ -1,4 +1,4 @@
-/* linux/include/asm-arm/arch-msm/msm_iomap.h
+/* arch/arm/mach-msm/include/mach/msm_iomap.h
  *
  * Copyright (C) 2007 Google, Inc.
  * Author: Brian Swetland <swetland@google.com>
diff --git a/arch/arm/mach-msm/include/mach/system.h b/arch/arm/mach-msm/include/mach/system.h
new file mode 100644
index 000000000000..f05ad2e0f235
--- /dev/null
+++ b/arch/arm/mach-msm/include/mach/system.h
@@ -0,0 +1,23 @@
+/* arch/arm/mach-msm/include/mach/system.h
+ *
+ * Copyright (C) 2007 Google, Inc.
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <mach/hardware.h>
+
+void arch_idle(void);
+
+static inline void arch_reset(char mode)
+{
+	for (;;) ;  /* depends on IPC w/ other core */
+}
diff --git a/arch/arm/mach-msm/include/mach/timex.h b/arch/arm/mach-msm/include/mach/timex.h
new file mode 100644
index 000000000000..a62e6b215aec
--- /dev/null
+++ b/arch/arm/mach-msm/include/mach/timex.h
@@ -0,0 +1,21 @@
+/* arch/arm/mach-msm/include/mach/timex.h
+ *
+ * Copyright (C) 2007 Google, Inc.
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#ifndef __ASM_ARCH_MSM_TIMEX_H
+#define __ASM_ARCH_MSM_TIMEX_H
+
+#define CLOCK_TICK_RATE		1000000
+
+#endif
diff --git a/arch/arm/mach-msm/include/mach/uncompress.h b/arch/arm/mach-msm/include/mach/uncompress.h
new file mode 100644
index 000000000000..026e8955ace9
--- /dev/null
+++ b/arch/arm/mach-msm/include/mach/uncompress.h
@@ -0,0 +1,36 @@
+/* arch/arm/mach-msm/include/mach/uncompress.h
+ *
+ * Copyright (C) 2007 Google, Inc.
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#ifndef __ASM_ARCH_MSM_UNCOMPRESS_H
+
+#include "hardware.h"
+
+static void putc(int c)
+{
+}
+
+static inline void flush(void)
+{
+}
+
+static inline void arch_decomp_setup(void)
+{
+}
+
+static inline void arch_decomp_wdog(void)
+{
+}
+
+#endif
diff --git a/arch/arm/mach-msm/include/mach/vmalloc.h b/arch/arm/mach-msm/include/mach/vmalloc.h
new file mode 100644
index 000000000000..05f81fd8623c
--- /dev/null
+++ b/arch/arm/mach-msm/include/mach/vmalloc.h
@@ -0,0 +1,22 @@
+/* arch/arm/mach-msm/include/mach/vmalloc.h
+ *
+ * Copyright (C) 2007 Google, Inc.
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#ifndef __ASM_ARCH_MSM_VMALLOC_H
+#define __ASM_ARCH_MSM_VMALLOC_H
+
+#define VMALLOC_END	  (PAGE_OFFSET + 0x10000000)
+
+#endif
+
diff --git a/arch/arm/mach-msm/io.c b/arch/arm/mach-msm/io.c
index c39edb994a88..5976200de99b 100644
--- a/arch/arm/mach-msm/io.c
+++ b/arch/arm/mach-msm/io.c
@@ -19,13 +19,13 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 #include <asm/page.h>
-#include <asm/arch/msm_iomap.h>
+#include <mach/msm_iomap.h>
 #include <asm/mach/map.h>
 
-#include <asm/arch/board.h>
+#include <mach/board.h>
 
 #define MSM_DEVICE(name) { \
 		.virtual = MSM_##name##_BASE, \
diff --git a/arch/arm/mach-msm/irq.c b/arch/arm/mach-msm/irq.c
index 24158040b789..66901baf8c8e 100644
--- a/arch/arm/mach-msm/irq.c
+++ b/arch/arm/mach-msm/irq.c
@@ -21,11 +21,11 @@
 #include <linux/timer.h>
 
 #include <linux/irq.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 
 #include <asm/io.h>
 
-#include <asm/arch/msm_iomap.h>
+#include <mach/msm_iomap.h>
 
 #define VIC_REG(off) (MSM_VIC_BASE + (off))
 
diff --git a/arch/arm/mach-msm/timer.c b/arch/arm/mach-msm/timer.c
index bd4732d1ab3e..9f02d7dca985 100644
--- a/arch/arm/mach-msm/timer.c
+++ b/arch/arm/mach-msm/timer.c
@@ -22,7 +22,7 @@
 #include <linux/delay.h>
 
 #include <asm/mach/time.h>
-#include <asm/arch/msm_iomap.h>
+#include <mach/msm_iomap.h>
 
 #include <asm/io.h>
 
diff --git a/arch/arm/mach-mv78xx0/common.c b/arch/arm/mach-mv78xx0/common.c
index d27b83b7bf62..953a26c469cb 100644
--- a/arch/arm/mach-mv78xx0/common.c
+++ b/arch/arm/mach-mv78xx0/common.c
@@ -17,11 +17,11 @@
 #include <linux/ata_platform.h>
 #include <asm/mach/map.h>
 #include <asm/mach/time.h>
-#include <asm/arch/mv78xx0.h>
-#include <asm/plat-orion/cache-feroceon-l2.h>
-#include <asm/plat-orion/ehci-orion.h>
-#include <asm/plat-orion/orion_nand.h>
-#include <asm/plat-orion/time.h>
+#include <mach/mv78xx0.h>
+#include <plat/cache-feroceon-l2.h>
+#include <plat/ehci-orion.h>
+#include <plat/orion_nand.h>
+#include <plat/time.h>
 #include "common.h"
 
 
diff --git a/arch/arm/mach-mv78xx0/db78x00-bp-setup.c b/arch/arm/mach-mv78xx0/db78x00-bp-setup.c
index 0c93d19193df..a2d0c9783604 100644
--- a/arch/arm/mach-mv78xx0/db78x00-bp-setup.c
+++ b/arch/arm/mach-mv78xx0/db78x00-bp-setup.c
@@ -13,7 +13,7 @@
 #include <linux/platform_device.h>
 #include <linux/ata_platform.h>
 #include <linux/mv643xx_eth.h>
-#include <asm/arch/mv78xx0.h>
+#include <mach/mv78xx0.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include "common.h"
diff --git a/arch/arm/mach-mv78xx0/include/mach/debug-macro.S b/arch/arm/mach-mv78xx0/include/mach/debug-macro.S
new file mode 100644
index 000000000000..a06442fbd341
--- /dev/null
+++ b/arch/arm/mach-mv78xx0/include/mach/debug-macro.S
@@ -0,0 +1,20 @@
+/*
+ * arch/arm/mach-mv78xx0/include/mach/debug-macro.S
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <mach/mv78xx0.h>
+
+	.macro	addruart,rx
+	mrc	p15, 0, \rx, c1, c0
+	tst	\rx, #1					@ MMU enabled?
+	ldreq	\rx, =MV78XX0_REGS_PHYS_BASE
+	ldrne	\rx, =MV78XX0_REGS_VIRT_BASE
+	orr	\rx, \rx, #0x00012000
+	.endm
+
+#define UART_SHIFT	2
+#include <asm/hardware/debug-8250.S>
diff --git a/include/asm-arm/arch-mv78xx0/dma.h b/arch/arm/mach-mv78xx0/include/mach/dma.h
index 40a8c178f10d..40a8c178f10d 100644
--- a/include/asm-arm/arch-mv78xx0/dma.h
+++ b/arch/arm/mach-mv78xx0/include/mach/dma.h
diff --git a/arch/arm/mach-mv78xx0/include/mach/entry-macro.S b/arch/arm/mach-mv78xx0/include/mach/entry-macro.S
new file mode 100644
index 000000000000..ed4a46bcd3b0
--- /dev/null
+++ b/arch/arm/mach-mv78xx0/include/mach/entry-macro.S
@@ -0,0 +1,39 @@
+/*
+ * arch/arm/mach-mv78xx0/include/mach/entry-macro.S
+ *
+ * Low-level IRQ helper macros for Marvell MV78xx0 platforms
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <mach/mv78xx0.h>
+
+	.macro  disable_fiq
+	.endm
+
+	.macro  arch_ret_to_user, tmp1, tmp2
+	.endm
+
+	.macro  get_irqnr_preamble, base, tmp
+	ldr	\base, =IRQ_VIRT_BASE
+	.endm
+
+	.macro  get_irqnr_and_base, irqnr, irqstat, base, tmp
+	@ check low interrupts
+	ldr	\irqstat, [\base, #IRQ_CAUSE_LOW_OFF]
+	ldr	\tmp, [\base, #IRQ_MASK_LOW_OFF]
+	mov	\irqnr, #31
+	ands	\irqstat, \irqstat, \tmp
+
+	@ if no low interrupts set, check high interrupts
+	ldreq	\irqstat, [\base, #IRQ_CAUSE_HIGH_OFF]
+	ldreq	\tmp, [\base, #IRQ_MASK_HIGH_OFF]
+	moveq	\irqnr, #63
+	andeqs	\irqstat, \irqstat, \tmp
+
+	@ find first active interrupt source
+	clzne	\irqstat, \irqstat
+	subne	\irqnr, \irqnr, \irqstat
+	.endm
diff --git a/arch/arm/mach-mv78xx0/include/mach/hardware.h b/arch/arm/mach-mv78xx0/include/mach/hardware.h
new file mode 100644
index 000000000000..5d887557e123
--- /dev/null
+++ b/arch/arm/mach-mv78xx0/include/mach/hardware.h
@@ -0,0 +1,21 @@
+/*
+ * arch/arm/mach-mv78xx0/include/mach/hardware.h
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __ASM_ARCH_HARDWARE_H
+#define __ASM_ARCH_HARDWARE_H
+
+#include "mv78xx0.h"
+
+#define pcibios_assign_all_busses()	1
+
+#define PCIBIOS_MIN_IO			0x00001000
+#define PCIBIOS_MIN_MEM			0x01000000
+#define PCIMEM_BASE			MV78XX0_PCIE_MEM_PHYS_BASE /* mem base for VGA */
+
+
+#endif
diff --git a/arch/arm/mach-mv78xx0/include/mach/io.h b/arch/arm/mach-mv78xx0/include/mach/io.h
new file mode 100644
index 000000000000..450e0e1ad092
--- /dev/null
+++ b/arch/arm/mach-mv78xx0/include/mach/io.h
@@ -0,0 +1,26 @@
+/*
+ * arch/arm/mach-mv78xx0/include/mach/io.h
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __ASM_ARCH_IO_H
+#define __ASM_ARCH_IO_H
+
+#include "mv78xx0.h"
+
+#define IO_SPACE_LIMIT		0xffffffff
+
+static inline void __iomem *__io(unsigned long addr)
+{
+	return (void __iomem *)((addr - MV78XX0_PCIE_IO_PHYS_BASE(0))
+					+ MV78XX0_PCIE_IO_VIRT_BASE(0));
+}
+
+#define __io(a)			__io(a)
+#define __mem_pci(a)		(a)
+
+
+#endif
diff --git a/arch/arm/mach-mv78xx0/include/mach/irqs.h b/arch/arm/mach-mv78xx0/include/mach/irqs.h
new file mode 100644
index 000000000000..995d7fb8d06f
--- /dev/null
+++ b/arch/arm/mach-mv78xx0/include/mach/irqs.h
@@ -0,0 +1,91 @@
+/*
+ * arch/arm/mach-mv78xx0/include/mach/irqs.h
+ *
+ * IRQ definitions for Marvell MV78xx0 SoCs
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __ASM_ARCH_IRQS_H
+#define __ASM_ARCH_IRQS_H
+
+#include "mv78xx0.h"	/* need GPIO_MAX */
+
+/*
+ * MV78xx0 Low Interrupt Controller
+ */
+#define IRQ_MV78XX0_ERR		0
+#define IRQ_MV78XX0_SPI		1
+#define IRQ_MV78XX0_I2C_0	2
+#define IRQ_MV78XX0_I2C_1	3
+#define IRQ_MV78XX0_IDMA_0	4
+#define IRQ_MV78XX0_IDMA_1	5
+#define IRQ_MV78XX0_IDMA_2	6
+#define IRQ_MV78XX0_IDMA_3	7
+#define IRQ_MV78XX0_TIMER_0	8
+#define IRQ_MV78XX0_TIMER_1	9
+#define IRQ_MV78XX0_TIMER_2	10
+#define IRQ_MV78XX0_TIMER_3	11
+#define IRQ_MV78XX0_UART_0	12
+#define IRQ_MV78XX0_UART_1	13
+#define IRQ_MV78XX0_UART_2	14
+#define IRQ_MV78XX0_UART_3	15
+#define IRQ_MV78XX0_USB_0	16
+#define IRQ_MV78XX0_USB_1	17
+#define IRQ_MV78XX0_USB_2	18
+#define IRQ_MV78XX0_CRYPTO	19
+#define IRQ_MV78XX0_SDIO_0	20
+#define IRQ_MV78XX0_SDIO_1	21
+#define IRQ_MV78XX0_XOR_0	22
+#define IRQ_MV78XX0_XOR_1	23
+#define IRQ_MV78XX0_I2S_0	24
+#define IRQ_MV78XX0_I2S_1	25
+#define IRQ_MV78XX0_SATA	26
+#define IRQ_MV78XX0_TDMI	27
+
+/*
+ * MV78xx0 High Interrupt Controller
+ */
+#define IRQ_MV78XX0_PCIE_00	32
+#define IRQ_MV78XX0_PCIE_01	33
+#define IRQ_MV78XX0_PCIE_02	34
+#define IRQ_MV78XX0_PCIE_03	35
+#define IRQ_MV78XX0_PCIE_10	36
+#define IRQ_MV78XX0_PCIE_11	37
+#define IRQ_MV78XX0_PCIE_12	38
+#define IRQ_MV78XX0_PCIE_13	39
+#define IRQ_MV78XX0_GE00_SUM	40
+#define IRQ_MV78XX0_GE00_RX	41
+#define IRQ_MV78XX0_GE00_TX	42
+#define IRQ_MV78XX0_GE00_MISC	43
+#define IRQ_MV78XX0_GE01_SUM	44
+#define IRQ_MV78XX0_GE01_RX	45
+#define IRQ_MV78XX0_GE01_TX	46
+#define IRQ_MV78XX0_GE01_MISC	47
+#define IRQ_MV78XX0_GE10_SUM	48
+#define IRQ_MV78XX0_GE10_RX	49
+#define IRQ_MV78XX0_GE10_TX	50
+#define IRQ_MV78XX0_GE10_MISC	51
+#define IRQ_MV78XX0_GE11_SUM	52
+#define IRQ_MV78XX0_GE11_RX	53
+#define IRQ_MV78XX0_GE11_TX	54
+#define IRQ_MV78XX0_GE11_MISC	55
+#define IRQ_MV78XX0_GPIO_0_7	56
+#define IRQ_MV78XX0_GPIO_8_15	57
+#define IRQ_MV78XX0_GPIO_16_23	58
+#define IRQ_MV78XX0_GPIO_24_31	59
+#define IRQ_MV78XX0_DB_IN	60
+#define IRQ_MV78XX0_DB_OUT	61
+
+/*
+ * MV78XX0 General Purpose Pins
+ */
+#define IRQ_MV78XX0_GPIO_START	64
+#define NR_GPIO_IRQS		GPIO_MAX
+
+#define NR_IRQS			(IRQ_MV78XX0_GPIO_START + NR_GPIO_IRQS)
+
+
+#endif
diff --git a/arch/arm/mach-mv78xx0/include/mach/memory.h b/arch/arm/mach-mv78xx0/include/mach/memory.h
new file mode 100644
index 000000000000..9e47a140ff7a
--- /dev/null
+++ b/arch/arm/mach-mv78xx0/include/mach/memory.h
@@ -0,0 +1,14 @@
+/*
+ * arch/arm/mach-mv78xx0/include/mach/memory.h
+ */
+
+#ifndef __ASM_ARCH_MEMORY_H
+#define __ASM_ARCH_MEMORY_H
+
+#define PHYS_OFFSET		UL(0x00000000)
+
+#define __virt_to_bus(x)	__virt_to_phys(x)
+#define __bus_to_virt(x)	__phys_to_virt(x)
+
+
+#endif
diff --git a/include/asm-arm/arch-mv78xx0/mv78xx0.h b/arch/arm/mach-mv78xx0/include/mach/mv78xx0.h
index 9f5d83c73faa..ad664178d6e1 100644
--- a/include/asm-arm/arch-mv78xx0/mv78xx0.h
+++ b/arch/arm/mach-mv78xx0/include/mach/mv78xx0.h
@@ -1,5 +1,5 @@
 /*
- * include/asm-arm/arch-mv78xx0/mv78xx0.h
+ * arch/arm/mach-mv78xx0/include/mach/mv78xx0.h
  *
  * Generic definitions for Marvell MV78xx0 SoC flavors:
  *  MV781x0 and MV782x0.
diff --git a/arch/arm/mach-mv78xx0/include/mach/system.h b/arch/arm/mach-mv78xx0/include/mach/system.h
new file mode 100644
index 000000000000..7d5179408832
--- /dev/null
+++ b/arch/arm/mach-mv78xx0/include/mach/system.h
@@ -0,0 +1,37 @@
+/*
+ * arch/arm/mach-mv78xx0/include/mach/system.h
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __ASM_ARCH_SYSTEM_H
+#define __ASM_ARCH_SYSTEM_H
+
+#include <mach/hardware.h>
+#include <mach/mv78xx0.h>
+
+static inline void arch_idle(void)
+{
+	cpu_do_idle();
+}
+
+static inline void arch_reset(char mode)
+{
+	/*
+	 * Enable soft reset to assert RSTOUTn.
+	 */
+	writel(SOFT_RESET_OUT_EN, RSTOUTn_MASK);
+
+	/*
+	 * Assert soft reset.
+	 */
+	writel(SOFT_RESET, SYSTEM_SOFT_RESET);
+
+	while (1)
+		;
+}
+
+
+#endif
diff --git a/arch/arm/mach-mv78xx0/include/mach/timex.h b/arch/arm/mach-mv78xx0/include/mach/timex.h
new file mode 100644
index 000000000000..0e8c443c723a
--- /dev/null
+++ b/arch/arm/mach-mv78xx0/include/mach/timex.h
@@ -0,0 +1,9 @@
+/*
+ * arch/arm/mach-mv78xx0/include/mach/timex.h
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#define CLOCK_TICK_RATE		(100 * HZ)
diff --git a/arch/arm/mach-mv78xx0/include/mach/uncompress.h b/arch/arm/mach-mv78xx0/include/mach/uncompress.h
new file mode 100644
index 000000000000..365264298e79
--- /dev/null
+++ b/arch/arm/mach-mv78xx0/include/mach/uncompress.h
@@ -0,0 +1,47 @@
+/*
+ * arch/arm/mach-mv78xx0/include/mach/uncompress.h
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/serial_reg.h>
+#include <mach/mv78xx0.h>
+
+#define SERIAL_BASE	((unsigned char *)UART0_PHYS_BASE)
+
+static void putc(const char c)
+{
+	unsigned char *base = SERIAL_BASE;
+	int i;
+
+	for (i = 0; i < 0x1000; i++) {
+		if (base[UART_LSR << 2] & UART_LSR_THRE)
+			break;
+		barrier();
+	}
+
+	base[UART_TX << 2] = c;
+}
+
+static void flush(void)
+{
+	unsigned char *base = SERIAL_BASE;
+	unsigned char mask;
+	int i;
+
+	mask = UART_LSR_TEMT | UART_LSR_THRE;
+
+	for (i = 0; i < 0x1000; i++) {
+		if ((base[UART_LSR << 2] & mask) == mask)
+			break;
+		barrier();
+	}
+}
+
+/*
+ * nothing to do
+ */
+#define arch_decomp_setup()
+#define arch_decomp_wdog()
diff --git a/arch/arm/mach-mv78xx0/include/mach/vmalloc.h b/arch/arm/mach-mv78xx0/include/mach/vmalloc.h
new file mode 100644
index 000000000000..1c4954386a84
--- /dev/null
+++ b/arch/arm/mach-mv78xx0/include/mach/vmalloc.h
@@ -0,0 +1,5 @@
+/*
+ * arch/arm/mach-mv78xx0/include/mach/vmalloc.h
+ */
+
+#define VMALLOC_END	0xfe000000
diff --git a/arch/arm/mach-mv78xx0/irq.c b/arch/arm/mach-mv78xx0/irq.c
index 60f4ee4d4532..28248d37b999 100644
--- a/arch/arm/mach-mv78xx0/irq.c
+++ b/arch/arm/mach-mv78xx0/irq.c
@@ -11,8 +11,8 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/pci.h>
-#include <asm/arch/mv78xx0.h>
-#include <asm/plat-orion/irq.h>
+#include <mach/mv78xx0.h>
+#include <plat/irq.h>
 #include "common.h"
 
 void __init mv78xx0_init_irq(void)
diff --git a/arch/arm/mach-mv78xx0/pcie.c b/arch/arm/mach-mv78xx0/pcie.c
index b78e1443159f..430ea84d587d 100644
--- a/arch/arm/mach-mv78xx0/pcie.c
+++ b/arch/arm/mach-mv78xx0/pcie.c
@@ -12,7 +12,7 @@
 #include <linux/pci.h>
 #include <linux/mbus.h>
 #include <asm/mach/pci.h>
-#include <asm/plat-orion/pcie.h>
+#include <plat/pcie.h>
 #include "common.h"
 
 struct pcie_port {
diff --git a/arch/arm/mach-mx2/clock_imx27.c b/arch/arm/mach-mx2/clock_imx27.c
index 0a29ef29c73a..c69896d011a1 100644
--- a/arch/arm/mach-mx2/clock_imx27.c
+++ b/arch/arm/mach-mx2/clock_imx27.c
@@ -22,10 +22,9 @@
 #include <linux/module.h>
 #include <linux/spinlock.h>
 
-#include <asm/arch/clock.h>
-#include <asm/arch/common.h>
+#include <mach/clock.h>
+#include <mach/common.h>
 #include <asm/div64.h>
-#include <asm/mach-types.h>
 
 #include "crm_regs.h"
 
diff --git a/arch/arm/mach-mx2/cpu_imx27.c b/arch/arm/mach-mx2/cpu_imx27.c
index d6b5c2e3377f..239308fe6652 100644
--- a/arch/arm/mach-mx2/cpu_imx27.c
+++ b/arch/arm/mach-mx2/cpu_imx27.c
@@ -24,7 +24,7 @@
 #include <linux/io.h>
 #include <linux/module.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 
 #include "crm_regs.h"
 
diff --git a/arch/arm/mach-mx2/crm_regs.h b/arch/arm/mach-mx2/crm_regs.h
index a40a9b950ce9..94644cd0a0fc 100644
--- a/arch/arm/mach-mx2/crm_regs.h
+++ b/arch/arm/mach-mx2/crm_regs.h
@@ -20,7 +20,7 @@
 #ifndef __ARCH_ARM_MACH_MX2_CRM_REGS_H__
 #define __ARCH_ARM_MACH_MX2_CRM_REGS_H__
 
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 
 /* Register offsets */
 #define CCM_CSCR                (IO_ADDRESS(CCM_BASE_ADDR) + 0x0)
diff --git a/arch/arm/mach-mx2/devices.c b/arch/arm/mach-mx2/devices.c
index a1f44c3c5315..bd0559d5933e 100644
--- a/arch/arm/mach-mx2/devices.c
+++ b/arch/arm/mach-mx2/devices.c
@@ -32,7 +32,7 @@
 #include <linux/platform_device.h>
 #include <linux/gpio.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 
 /*
  * Resource definition for the MXC IrDA
diff --git a/arch/arm/mach-mx2/generic.c b/arch/arm/mach-mx2/generic.c
index 07875cf00de9..dea6521d4d5c 100644
--- a/arch/arm/mach-mx2/generic.c
+++ b/arch/arm/mach-mx2/generic.c
@@ -20,7 +20,7 @@
 
 #include <linux/mm.h>
 #include <linux/init.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/pgtable.h>
 #include <asm/mach/map.h>
 
diff --git a/arch/arm/mach-mx2/mx27ads.c b/arch/arm/mach-mx2/mx27ads.c
index a9ff01fff137..4ce56ef4d8d3 100644
--- a/arch/arm/mach-mx2/mx27ads.c
+++ b/arch/arm/mach-mx2/mx27ads.c
@@ -23,16 +23,16 @@
 #include <linux/mtd/map.h>
 #include <linux/mtd/partitions.h>
 #include <linux/mtd/physmap.h>
-#include <asm/arch/common.h>
-#include <asm/hardware.h>
+#include <mach/common.h>
+#include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/time.h>
 #include <asm/mach/map.h>
-#include <asm/arch/gpio.h>
-#include <asm/arch/imx-uart.h>
-#include <asm/arch/iomux-mx1-mx2.h>
-#include <asm/arch/board-mx27ads.h>
+#include <mach/gpio.h>
+#include <mach/imx-uart.h>
+#include <mach/iomux-mx1-mx2.h>
+#include <mach/board-mx27ads.h>
 
 /* ADS's NOR flash */
 static struct physmap_flash_data mx27ads_flash_data = {
diff --git a/arch/arm/mach-mx2/pcm038.c b/arch/arm/mach-mx2/pcm038.c
index a9a28f58e714..1028f453cfc8 100644
--- a/arch/arm/mach-mx2/pcm038.c
+++ b/arch/arm/mach-mx2/pcm038.c
@@ -21,12 +21,12 @@
 #include <linux/mtd/physmap.h>
 #include <asm/mach/arch.h>
 #include <asm/mach-types.h>
-#include <asm/arch/common.h>
-#include <asm/hardware.h>
-#include <asm/arch/iomux-mx1-mx2.h>
+#include <mach/common.h>
+#include <mach/hardware.h>
+#include <mach/iomux-mx1-mx2.h>
 #include <asm/mach/time.h>
-#include <asm/arch/imx-uart.h>
-#include <asm/arch/board-pcm038.h>
+#include <mach/imx-uart.h>
+#include <mach/board-pcm038.h>
 
 /*
  * Phytec's phyCORE-i.MX27 comes with 32MiB flash,
diff --git a/arch/arm/mach-mx2/pcm970-baseboard.c b/arch/arm/mach-mx2/pcm970-baseboard.c
index 028ac4d33684..a560cd6ad23d 100644
--- a/arch/arm/mach-mx2/pcm970-baseboard.c
+++ b/arch/arm/mach-mx2/pcm970-baseboard.c
@@ -17,8 +17,7 @@
  */
 
 #include <linux/platform_device.h>
-#include <asm/hardware.h>
-#include <asm/mach-types.h>
+#include <mach/hardware.h>
 #include <asm/mach/arch.h>
 
 /*
diff --git a/arch/arm/mach-mx2/serial.c b/arch/arm/mach-mx2/serial.c
index 570c02b8e5df..e31fd44f7941 100644
--- a/arch/arm/mach-mx2/serial.c
+++ b/arch/arm/mach-mx2/serial.c
@@ -20,8 +20,8 @@
 #include <linux/module.h>
 #include <linux/platform_device.h>
 #include <linux/serial.h>
-#include <asm/hardware.h>
-#include <asm/arch/imx-uart.h>
+#include <mach/hardware.h>
+#include <mach/imx-uart.h>
 
 static struct resource uart0[] = {
 	{
diff --git a/arch/arm/mach-mx2/system.c b/arch/arm/mach-mx2/system.c
index 99304645299d..7b8269719d11 100644
--- a/arch/arm/mach-mx2/system.c
+++ b/arch/arm/mach-mx2/system.c
@@ -23,7 +23,7 @@
 #include <linux/clk.h>
 #include <linux/io.h>
 
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/proc-fns.h>
 #include <asm/system.h>
 
diff --git a/arch/arm/mach-mx3/clock.c b/arch/arm/mach-mx3/clock.c
index 2f3635943e70..9f14a871ee7c 100644
--- a/arch/arm/mach-mx3/clock.c
+++ b/arch/arm/mach-mx3/clock.c
@@ -23,7 +23,7 @@
 #include <linux/clk.h>
 #include <linux/err.h>
 #include <linux/io.h>
-#include <asm/arch/clock.h>
+#include <mach/clock.h>
 #include <asm/div64.h>
 
 #include "crm_regs.h"
diff --git a/arch/arm/mach-mx3/devices.c b/arch/arm/mach-mx3/devices.c
index 5c0320fce5b6..e08c6a8ac56b 100644
--- a/arch/arm/mach-mx3/devices.c
+++ b/arch/arm/mach-mx3/devices.c
@@ -21,8 +21,8 @@
 #include <linux/platform_device.h>
 #include <linux/serial.h>
 #include <linux/gpio.h>
-#include <asm/hardware.h>
-#include <asm/arch/imx-uart.h>
+#include <mach/hardware.h>
+#include <mach/imx-uart.h>
 
 static struct resource uart0[] = {
 	{
diff --git a/arch/arm/mach-mx3/iomux.c b/arch/arm/mach-mx3/iomux.c
index adc51feefc1d..3dda1fe23cbf 100644
--- a/arch/arm/mach-mx3/iomux.c
+++ b/arch/arm/mach-mx3/iomux.c
@@ -21,9 +21,9 @@
 #include <linux/spinlock.h>
 #include <linux/io.h>
 #include <linux/gpio.h>
-#include <asm/hardware.h>
-#include <asm/arch/gpio.h>
-#include <asm/arch/iomux-mx3.h>
+#include <mach/hardware.h>
+#include <mach/gpio.h>
+#include <mach/iomux-mx3.h>
 
 /*
  * IOMUX register (base) addresses
diff --git a/arch/arm/mach-mx3/mm.c b/arch/arm/mach-mx3/mm.c
index 41dad485ded9..30d842bd4d64 100644
--- a/arch/arm/mach-mx3/mm.c
+++ b/arch/arm/mach-mx3/mm.c
@@ -22,10 +22,10 @@
 
 #include <linux/mm.h>
 #include <linux/init.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/pgtable.h>
 #include <asm/mach/map.h>
-#include <asm/arch/common.h>
+#include <mach/common.h>
 
 /*!
  * @file mm.c
diff --git a/arch/arm/mach-mx3/mx31ads.c b/arch/arm/mach-mx3/mx31ads.c
index eba3e0cd4283..60fb4e0d5acd 100644
--- a/arch/arm/mach-mx3/mx31ads.c
+++ b/arch/arm/mach-mx3/mx31ads.c
@@ -23,14 +23,14 @@
 #include <linux/clk.h>
 #include <linux/serial_8250.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/time.h>
 #include <asm/memory.h>
 #include <asm/mach/map.h>
-#include <asm/arch/common.h>
-#include <asm/arch/board-mx31ads.h>
+#include <mach/common.h>
+#include <mach/board-mx31ads.h>
 
 /*!
  * @file mx31ads.c
diff --git a/arch/arm/mach-mx3/mx31lite.c b/arch/arm/mach-mx3/mx31lite.c
index 1372c1a1fc3f..d363a6e79f80 100644
--- a/arch/arm/mach-mx3/mx31lite.c
+++ b/arch/arm/mach-mx3/mx31lite.c
@@ -23,15 +23,15 @@
 #include <linux/kernel.h>
 #include <linux/memory.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/time.h>
 #include <asm/mach/map.h>
-#include <asm/arch/common.h>
+#include <mach/common.h>
 #include <asm/page.h>
 #include <asm/setup.h>
-#include <asm/arch/board-mx31lite.h>
+#include <mach/board-mx31lite.h>
 
 /*
  * This file contains the board-specific initialization routines.
diff --git a/arch/arm/mach-mx3/pcm037.c b/arch/arm/mach-mx3/pcm037.c
index a34ae6de266f..0a152ed15a85 100644
--- a/arch/arm/mach-mx3/pcm037.c
+++ b/arch/arm/mach-mx3/pcm037.c
@@ -23,15 +23,15 @@
 #include <linux/mtd/physmap.h>
 #include <linux/memory.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/time.h>
 #include <asm/mach/map.h>
-#include <asm/arch/common.h>
-#include <asm/arch/imx-uart.h>
-#include <asm/arch/iomux-mx3.h>
-#include <asm/arch/board-pcm037.h>
+#include <mach/common.h>
+#include <mach/imx-uart.h>
+#include <mach/iomux-mx3.h>
+#include <mach/board-pcm037.h>
 
 static struct physmap_flash_data pcm037_flash_data = {
 	.width  = 2,
diff --git a/arch/arm/mach-netx/fb.c b/arch/arm/mach-netx/fb.c
index ef0ab6115c0b..24c79650f9f3 100644
--- a/arch/arm/mach-netx/fb.c
+++ b/arch/arm/mach-netx/fb.c
@@ -23,8 +23,8 @@
 #include <linux/amba/bus.h>
 #include <linux/amba/clcd.h>
 
-#include <asm/arch/netx-regs.h>
-#include <asm/hardware.h>
+#include <mach/netx-regs.h>
+#include <mach/hardware.h>
 
 struct clk {};
 
diff --git a/arch/arm/mach-netx/generic.c b/arch/arm/mach-netx/generic.c
index fd7537f7d11e..1b40483ea753 100644
--- a/arch/arm/mach-netx/generic.c
+++ b/arch/arm/mach-netx/generic.c
@@ -22,11 +22,11 @@
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/platform_device.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/mach/map.h>
 #include <asm/hardware/vic.h>
 #include <asm/io.h>
-#include <asm/arch/netx-regs.h>
+#include <mach/netx-regs.h>
 #include <asm/mach/irq.h>
 
 static struct map_desc netx_io_desc[] __initdata = {
@@ -99,19 +99,19 @@ netx_hif_irq_type(unsigned int _irq, unsigned int type)
 
 	irq = _irq - NETX_IRQ_HIF_CHAINED(0);
 
-	if (type & __IRQT_RISEDGE) {
+	if (type & IRQ_TYPE_EDGE_RISING) {
 		DEBUG_IRQ("rising edges\n");
 		val |= (1 << 26) << irq;
 	}
-	if (type & __IRQT_FALEDGE) {
+	if (type & IRQ_TYPE_EDGE_FALLING) {
 		DEBUG_IRQ("falling edges\n");
 		val &= ~((1 << 26) << irq);
 	}
-	if (type & __IRQT_LOWLVL) {
+	if (type & IRQ_TYPE_LEVEL_LOW) {
 		DEBUG_IRQ("low level\n");
 		val &= ~((1 << 26) << irq);
 	}
-	if (type & __IRQT_HIGHLVL) {
+	if (type & IRQ_TYPE_LEVEL_HIGH) {
 		DEBUG_IRQ("high level\n");
 		val |= (1 << 26) << irq;
 	}
diff --git a/arch/arm/mach-netx/include/mach/debug-macro.S b/arch/arm/mach-netx/include/mach/debug-macro.S
new file mode 100644
index 000000000000..11b9d5b46390
--- /dev/null
+++ b/arch/arm/mach-netx/include/mach/debug-macro.S
@@ -0,0 +1,38 @@
+/* arch/arm/mach-netx/include/mach/debug-macro.S
+ *
+ * Debugging macro include header
+ *
+ *  Copyright (C) 1994-1999 Russell King
+ *  Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+*/
+
+#include "hardware.h"
+
+		.macro	addruart,rx
+		mrc	p15, 0, \rx, c1, c0
+		tst	\rx, #1			@ MMU enabled?
+		moveq	\rx, #0x00100000		@ physical
+		movne	\rx, #io_p2v(0x00100000)	@ virtual
+		orr	\rx, \rx, #0x00000a00
+		.endm
+
+		.macro	senduart,rd,rx
+		str	\rd, [\rx, #0]
+		.endm
+
+		.macro	busyuart,rd,rx
+1002:		ldr	\rd, [\rx, #0x18]
+		tst	\rd, #(1 << 3)
+		bne	1002b
+		.endm
+
+		.macro	waituart,rd,rx
+1001:		ldr	\rd, [\rx, #0x18]
+		tst	\rd, #(1 << 3)
+		bne	1001b
+		.endm
diff --git a/arch/arm/mach-netx/include/mach/dma.h b/arch/arm/mach-netx/include/mach/dma.h
new file mode 100644
index 000000000000..690b3ebc43ac
--- /dev/null
+++ b/arch/arm/mach-netx/include/mach/dma.h
@@ -0,0 +1,21 @@
+/*
+ *  arch/arm/mach-netx/include/mach/dma.h
+ *
+ * Copyright (C) 2005 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2
+ * as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#define MAX_DMA_CHANNELS 0
+#define MAX_DMA_ADDRESS ~0
diff --git a/arch/arm/mach-netx/include/mach/entry-macro.S b/arch/arm/mach-netx/include/mach/entry-macro.S
new file mode 100644
index 000000000000..a1952a0feda6
--- /dev/null
+++ b/arch/arm/mach-netx/include/mach/entry-macro.S
@@ -0,0 +1,41 @@
+/*
+ * arch/arm/mach-netx/include/mach/entry-macro.S
+ *
+ * Low-level IRQ helper macros for Hilscher netX based platforms
+ *
+ * Copyright (C) 2005 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2
+ * as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#include <mach/hardware.h>
+
+		.macro  disable_fiq
+		.endm
+
+		.macro  get_irqnr_preamble, base, tmp
+		.endm
+
+		.macro  arch_ret_to_user, tmp1, tmp2
+		.endm
+
+		.macro  get_irqnr_and_base, irqnr, irqstat, base, tmp
+		mov	\base, #io_p2v(0x00100000)
+		add	\base, \base, #0x000ff000
+
+		ldr	\irqstat, [\base, #0]
+		clz	\irqnr, \irqstat
+		rsb     \irqnr, \irqnr, #31
+		cmp	\irqstat, #0
+		.endm
+
diff --git a/include/asm-arm/arch-netx/eth.h b/arch/arm/mach-netx/include/mach/eth.h
index 643c90ef8b72..88af1ac28ead 100644
--- a/include/asm-arm/arch-netx/eth.h
+++ b/arch/arm/mach-netx/include/mach/eth.h
@@ -1,5 +1,5 @@
 /*
- * include/asm-arm/arch-netx/eth.h
+ * arch/arm/mach-netx/include/mach/eth.h
  *
  * Copyright (c) 2005 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix
  *
diff --git a/arch/arm/mach-netx/include/mach/hardware.h b/arch/arm/mach-netx/include/mach/hardware.h
new file mode 100644
index 000000000000..517a2bd37842
--- /dev/null
+++ b/arch/arm/mach-netx/include/mach/hardware.h
@@ -0,0 +1,39 @@
+/*
+ * arch/arm/mach-netx/include/mach/hardware.h
+ *
+ * Copyright (C) 2005 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2
+ * as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#ifndef __ASM_ARCH_HARDWARE_H
+#define __ASM_ARCH_HARDWARE_H
+
+#define NETX_IO_PHYS	0x00100000
+#define NETX_IO_VIRT	0xe0000000
+#define NETX_IO_SIZE	0x00100000
+
+#define SRAM_INTERNAL_PHYS_0 0x00000
+#define SRAM_INTERNAL_PHYS_1 0x08000
+#define SRAM_INTERNAL_PHYS_2 0x10000
+#define SRAM_INTERNAL_PHYS_3 0x18000
+#define SRAM_INTERNAL_PHYS(no) ((no) * 0x8000)
+
+#define XPEC_MEM_SIZE 0x4000
+#define XMAC_MEM_SIZE 0x1000
+#define SRAM_MEM_SIZE 0x8000
+
+#define io_p2v(x) ((x) - NETX_IO_PHYS + NETX_IO_VIRT)
+#define io_v2p(x) ((x) - NETX_IO_VIRT + NETX_IO_PHYS)
+
+#endif
diff --git a/arch/arm/mach-netx/include/mach/io.h b/arch/arm/mach-netx/include/mach/io.h
new file mode 100644
index 000000000000..468b92a82585
--- /dev/null
+++ b/arch/arm/mach-netx/include/mach/io.h
@@ -0,0 +1,28 @@
+/*
+ *  arch/arm/mach-netx/include/mach/io.h
+ *
+ * Copyright (C) 2005 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2
+ * as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#ifndef __ASM_ARM_ARCH_IO_H
+#define __ASM_ARM_ARCH_IO_H
+
+#define IO_SPACE_LIMIT 0xffffffff
+
+#define __io(a)         ((void __iomem *)(a))
+#define __mem_pci(a)            (a)
+
+#endif
diff --git a/arch/arm/mach-netx/include/mach/irqs.h b/arch/arm/mach-netx/include/mach/irqs.h
new file mode 100644
index 000000000000..6ce914d54a30
--- /dev/null
+++ b/arch/arm/mach-netx/include/mach/irqs.h
@@ -0,0 +1,70 @@
+/*
+ * arch/arm/mach-netx/include/mach/irqs.h
+ *
+ * Copyright (C) 2005 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2
+ * as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#define NETX_IRQ_VIC_START   0
+#define NETX_IRQ_SOFTINT     0
+#define NETX_IRQ_TIMER0      1
+#define NETX_IRQ_TIMER1      2
+#define NETX_IRQ_TIMER2      3
+#define NETX_IRQ_SYSTIME_NS  4
+#define NETX_IRQ_SYSTIME_S   5
+#define NETX_IRQ_GPIO_15     6
+#define NETX_IRQ_WATCHDOG    7
+#define NETX_IRQ_UART0       8
+#define NETX_IRQ_UART1       9
+#define NETX_IRQ_UART2      10
+#define NETX_IRQ_USB        11
+#define NETX_IRQ_SPI        12
+#define NETX_IRQ_I2C        13
+#define NETX_IRQ_LCD        14
+#define NETX_IRQ_HIF        15
+#define NETX_IRQ_GPIO_0_14  16
+#define NETX_IRQ_XPEC0      17
+#define NETX_IRQ_XPEC1      18
+#define NETX_IRQ_XPEC2      19
+#define NETX_IRQ_XPEC3      20
+#define NETX_IRQ_XPEC(no)   (17 + (no))
+#define NETX_IRQ_MSYNC0     21
+#define NETX_IRQ_MSYNC1     22
+#define NETX_IRQ_MSYNC2     23
+#define NETX_IRQ_MSYNC3     24
+#define NETX_IRQ_IRQ_PHY    25
+#define NETX_IRQ_ISO_AREA   26
+/* int 27 is reserved */
+/* int 28 is reserved */
+#define NETX_IRQ_TIMER3     29
+#define NETX_IRQ_TIMER4     30
+/* int 31 is reserved */
+
+#define NETX_IRQS 32
+
+/* for multiplexed irqs on gpio 0..14 */
+#define NETX_IRQ_GPIO(x) (NETX_IRQS + (x))
+#define NETX_IRQ_GPIO_LAST NETX_IRQ_GPIO(14)
+
+/* Host interface interrupts */
+#define NETX_IRQ_HIF_CHAINED(x)    (NETX_IRQ_GPIO_LAST + 1 + (x))
+#define NETX_IRQ_HIF_PIO35         NETX_IRQ_HIF_CHAINED(0)
+#define NETX_IRQ_HIF_PIO36         NETX_IRQ_HIF_CHAINED(1)
+#define NETX_IRQ_HIF_PIO40         NETX_IRQ_HIF_CHAINED(2)
+#define NETX_IRQ_HIF_PIO47         NETX_IRQ_HIF_CHAINED(3)
+#define NETX_IRQ_HIF_PIO72         NETX_IRQ_HIF_CHAINED(4)
+#define NETX_IRQ_HIF_LAST          NETX_IRQ_HIF_CHAINED(4)
+
+#define NR_IRQS (NETX_IRQ_HIF_LAST + 1)
diff --git a/arch/arm/mach-netx/include/mach/memory.h b/arch/arm/mach-netx/include/mach/memory.h
new file mode 100644
index 000000000000..53745a1378de
--- /dev/null
+++ b/arch/arm/mach-netx/include/mach/memory.h
@@ -0,0 +1,36 @@
+/*
+ *  arch/arm/mach-netx/include/mach/memory.h
+ *
+ * Copyright (C) 2005 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2
+ * as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#ifndef __ASM_ARCH_MEMORY_H
+#define __ASM_ARCH_MEMORY_H
+
+#define PHYS_OFFSET UL(0x80000000)
+
+/*
+ * Virtual view <-> DMA view memory address translations
+ * virt_to_bus: Used to translate the virtual address to an
+ *              address suitable to be passed to set_dma_addr
+ * bus_to_virt: Used to convert an address for DMA operations
+ *              to an address that the kernel can use.
+ */
+#define __virt_to_bus(x)         __virt_to_phys(x)
+#define __bus_to_virt(x)         __phys_to_virt(x)
+
+#endif
+
diff --git a/include/asm-arm/arch-netx/netx-regs.h b/arch/arm/mach-netx/include/mach/netx-regs.h
index fc9aa21f360c..5104a00d40f4 100644
--- a/include/asm-arm/arch-netx/netx-regs.h
+++ b/arch/arm/mach-netx/include/mach/netx-regs.h
@@ -1,5 +1,5 @@
 /*
- * include/asm-arm/arch-netx/netx-regs.h
+ * arch/arm/mach-netx/include/mach/netx-regs.h
  *
  * Copyright (c) 2005 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix
  *
diff --git a/arch/arm/mach-netx/include/mach/param.h b/arch/arm/mach-netx/include/mach/param.h
new file mode 100644
index 000000000000..a771459206aa
--- /dev/null
+++ b/arch/arm/mach-netx/include/mach/param.h
@@ -0,0 +1,18 @@
+/*
+ *  arch/arm/mach-netx/include/mach/param.h
+ *
+ * Copyright (C) 2005 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2
+ * as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
diff --git a/include/asm-arm/arch-netx/pfifo.h b/arch/arm/mach-netx/include/mach/pfifo.h
index 4af2ee4a32c1..42c59068f8d8 100644
--- a/include/asm-arm/arch-netx/pfifo.h
+++ b/arch/arm/mach-netx/include/mach/pfifo.h
@@ -1,5 +1,5 @@
 /*
- * include/asm-arm/arch-netx/pfifo.h
+ * arch/arm/mach-netx/include/mach/pfifo.h
  *
  * Copyright (c) 2005 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix
  *
diff --git a/arch/arm/mach-netx/include/mach/system.h b/arch/arm/mach-netx/include/mach/system.h
new file mode 100644
index 000000000000..27d8ef8e8e29
--- /dev/null
+++ b/arch/arm/mach-netx/include/mach/system.h
@@ -0,0 +1,38 @@
+/*
+ * arch/arm/mach-netx/include/mach/system.h
+ *
+ * Copyright (C) 2005 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2
+ * as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#ifndef __ASM_ARCH_SYSTEM_H
+#define __ASM_ARCH_SYSTEM_H
+
+#include <asm/io.h>
+#include <mach/hardware.h>
+#include "netx-regs.h"
+
+static inline void arch_idle(void)
+{
+	cpu_do_idle();
+}
+
+static inline void arch_reset(char mode)
+{
+	writel(NETX_SYSTEM_RES_CR_FIRMW_RES_EN | NETX_SYSTEM_RES_CR_FIRMW_RES,
+	       NETX_SYSTEM_RES_CR);
+}
+
+#endif
+
diff --git a/arch/arm/mach-netx/include/mach/timex.h b/arch/arm/mach-netx/include/mach/timex.h
new file mode 100644
index 000000000000..1120dd0ba393
--- /dev/null
+++ b/arch/arm/mach-netx/include/mach/timex.h
@@ -0,0 +1,20 @@
+/*
+ * arch/arm/mach-netx/include/mach/timex.h
+ *
+ * Copyright (C) 2005 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2
+ * as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#define CLOCK_TICK_RATE 100000000
diff --git a/arch/arm/mach-netx/include/mach/uncompress.h b/arch/arm/mach-netx/include/mach/uncompress.h
new file mode 100644
index 000000000000..84f91284f612
--- /dev/null
+++ b/arch/arm/mach-netx/include/mach/uncompress.h
@@ -0,0 +1,76 @@
+/*
+ * arch/arm/mach-netx/include/mach/uncompress.h
+ *
+ * Copyright (C) 2005 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2
+ * as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+/*
+ * The following code assumes the serial port has already been
+ * initialized by the bootloader.  We search for the first enabled
+ * port in the most probable order.  If you didn't setup a port in
+ * your bootloader then nothing will appear (which might be desired).
+ *
+ * This does not append a newline
+ */
+
+#define REG(x) (*(volatile unsigned long *)(x))
+
+#define UART1_BASE 0x100a00
+#define UART2_BASE 0x100a80
+
+#define UART_DR 0x0
+
+#define UART_CR 0x14
+#define CR_UART_EN (1<<0)
+
+#define UART_FR 0x18
+#define FR_BUSY (1<<3)
+#define FR_TXFF (1<<5)
+
+static void putc(char c)
+{
+	unsigned long base;
+
+	if (REG(UART1_BASE + UART_CR) & CR_UART_EN)
+		base = UART1_BASE;
+	else if (REG(UART2_BASE + UART_CR) & CR_UART_EN)
+		base = UART2_BASE;
+	else
+		return;
+
+	while (REG(base + UART_FR) & FR_TXFF);
+	REG(base + UART_DR) = c;
+}
+
+static inline void flush(void)
+{
+	unsigned long base;
+
+	if (REG(UART1_BASE + UART_CR) & CR_UART_EN)
+		base = UART1_BASE;
+	else if (REG(UART2_BASE + UART_CR) & CR_UART_EN)
+		base = UART2_BASE;
+	else
+		return;
+
+	while (REG(base + UART_FR) & FR_BUSY);
+}
+
+/*
+ * nothing to do
+ */
+#define arch_decomp_setup()
+#define arch_decomp_wdog()
diff --git a/arch/arm/mach-netx/include/mach/vmalloc.h b/arch/arm/mach-netx/include/mach/vmalloc.h
new file mode 100644
index 000000000000..25d5cc676e0f
--- /dev/null
+++ b/arch/arm/mach-netx/include/mach/vmalloc.h
@@ -0,0 +1,19 @@
+/*
+ *  arch/arm/mach-netx/include/mach/vmalloc.h
+ *
+ * Copyright (C) 2005 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2
+ * as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#define VMALLOC_END       (PAGE_OFFSET + 0x10000000)
diff --git a/include/asm-arm/arch-netx/xc.h b/arch/arm/mach-netx/include/mach/xc.h
index 659af19512a9..0c0011d4fc2d 100644
--- a/include/asm-arm/arch-netx/xc.h
+++ b/arch/arm/mach-netx/include/mach/xc.h
@@ -1,5 +1,5 @@
 /*
- *  linux/include/asm-arm/arch-netx/xc.h
+ *  arch/arm/mach-netx/include/mach/xc.h
  *
  * Copyright (C) 2005 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix
  *
diff --git a/arch/arm/mach-netx/nxdb500.c b/arch/arm/mach-netx/nxdb500.c
index e4a133d62846..c9b174bc8ccf 100644
--- a/arch/arm/mach-netx/nxdb500.c
+++ b/arch/arm/mach-netx/nxdb500.c
@@ -25,11 +25,11 @@
 #include <linux/amba/bus.h>
 #include <linux/amba/clcd.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
-#include <asm/arch/netx-regs.h>
-#include <asm/arch/eth.h>
+#include <mach/netx-regs.h>
+#include <mach/eth.h>
 
 #include "generic.h"
 #include "fb.h"
diff --git a/arch/arm/mach-netx/nxdkn.c b/arch/arm/mach-netx/nxdkn.c
index 7e26c42d1ac7..15b54c62d60f 100644
--- a/arch/arm/mach-netx/nxdkn.c
+++ b/arch/arm/mach-netx/nxdkn.c
@@ -25,11 +25,11 @@
 #include <linux/amba/bus.h>
 #include <linux/amba/clcd.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
-#include <asm/arch/netx-regs.h>
-#include <asm/arch/eth.h>
+#include <mach/netx-regs.h>
+#include <mach/eth.h>
 
 #include "generic.h"
 
diff --git a/arch/arm/mach-netx/nxeb500hmi.c b/arch/arm/mach-netx/nxeb500hmi.c
index 53e10a9849f9..1061c01ff679 100644
--- a/arch/arm/mach-netx/nxeb500hmi.c
+++ b/arch/arm/mach-netx/nxeb500hmi.c
@@ -25,11 +25,11 @@
 #include <linux/amba/bus.h>
 #include <linux/amba/clcd.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
-#include <asm/arch/netx-regs.h>
-#include <asm/arch/eth.h>
+#include <mach/netx-regs.h>
+#include <mach/eth.h>
 
 #include "generic.h"
 #include "fb.h"
diff --git a/arch/arm/mach-netx/pfifo.c b/arch/arm/mach-netx/pfifo.c
index 44dea61a9de4..19ae0a72bea3 100644
--- a/arch/arm/mach-netx/pfifo.c
+++ b/arch/arm/mach-netx/pfifo.c
@@ -22,9 +22,9 @@
 #include <linux/mutex.h>
 
 #include <asm/io.h>
-#include <asm/hardware.h>
-#include <asm/arch/netx-regs.h>
-#include <asm/arch/pfifo.h>
+#include <mach/hardware.h>
+#include <mach/netx-regs.h>
+#include <mach/pfifo.h>
 
 static DEFINE_MUTEX(pfifo_lock);
 
diff --git a/arch/arm/mach-netx/time.c b/arch/arm/mach-netx/time.c
index ea07b54afa59..ac8e5bfed691 100644
--- a/arch/arm/mach-netx/time.c
+++ b/arch/arm/mach-netx/time.c
@@ -22,10 +22,10 @@
 #include <linux/irq.h>
 #include <linux/clocksource.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 #include <asm/mach/time.h>
-#include <asm/arch/netx-regs.h>
+#include <mach/netx-regs.h>
 
 /*
  * IRQ handler for the timer
diff --git a/arch/arm/mach-netx/xc.c b/arch/arm/mach-netx/xc.c
index ca9c5b61283a..04c34e82fe6d 100644
--- a/arch/arm/mach-netx/xc.c
+++ b/arch/arm/mach-netx/xc.c
@@ -23,10 +23,10 @@
 #include <linux/mutex.h>
 
 #include <asm/io.h>
-#include <asm/hardware.h>
-#include <asm/arch/netx-regs.h>
+#include <mach/hardware.h>
+#include <mach/netx-regs.h>
 
-#include <asm/arch/xc.h>
+#include <mach/xc.h>
 
 static DEFINE_MUTEX(xc_lock);
 
diff --git a/arch/arm/mach-ns9xxx/board-a9m9750dev.c b/arch/arm/mach-ns9xxx/board-a9m9750dev.c
index a494b71c0195..a22a608a7aba 100644
--- a/arch/arm/mach-ns9xxx/board-a9m9750dev.c
+++ b/arch/arm/mach-ns9xxx/board-a9m9750dev.c
@@ -13,12 +13,12 @@
 #include <asm/mach/map.h>
 #include <asm/gpio.h>
 
-#include <asm/arch-ns9xxx/board.h>
-#include <asm/arch-ns9xxx/processor-ns9360.h>
-#include <asm/arch-ns9xxx/regs-sys-ns9360.h>
-#include <asm/arch-ns9xxx/regs-mem.h>
-#include <asm/arch-ns9xxx/regs-bbu.h>
-#include <asm/arch-ns9xxx/regs-board-a9m9750dev.h>
+#include <mach/board.h>
+#include <mach/processor-ns9360.h>
+#include <mach/regs-sys-ns9360.h>
+#include <mach/regs-mem.h>
+#include <mach/regs-bbu.h>
+#include <mach/regs-board-a9m9750dev.h>
 
 #include "board-a9m9750dev.h"
 
diff --git a/arch/arm/mach-ns9xxx/gpio-ns9360.c b/arch/arm/mach-ns9xxx/gpio-ns9360.c
index cabfb879dda9..377330c1b250 100644
--- a/arch/arm/mach-ns9xxx/gpio-ns9360.c
+++ b/arch/arm/mach-ns9xxx/gpio-ns9360.c
@@ -14,8 +14,8 @@
 #include <linux/kernel.h>
 #include <linux/module.h>
 
-#include <asm/arch-ns9xxx/regs-bbu.h>
-#include <asm/arch-ns9xxx/processor-ns9360.h>
+#include <mach/regs-bbu.h>
+#include <mach/processor-ns9360.h>
 
 #include "gpio-ns9360.h"
 
diff --git a/arch/arm/mach-ns9xxx/gpio.c b/arch/arm/mach-ns9xxx/gpio.c
index b3c963b0c8f5..804c30075960 100644
--- a/arch/arm/mach-ns9xxx/gpio.c
+++ b/arch/arm/mach-ns9xxx/gpio.c
@@ -13,9 +13,9 @@
 #include <linux/spinlock.h>
 #include <linux/module.h>
 
-#include <asm/arch-ns9xxx/gpio.h>
-#include <asm/arch-ns9xxx/processor.h>
-#include <asm/arch-ns9xxx/processor-ns9360.h>
+#include <mach/gpio.h>
+#include <mach/processor.h>
+#include <mach/processor-ns9360.h>
 #include <asm/bug.h>
 #include <asm/types.h>
 #include <asm/bitops.h>
diff --git a/arch/arm/mach-ns9xxx/include/mach/board.h b/arch/arm/mach-ns9xxx/include/mach/board.h
new file mode 100644
index 000000000000..f7e9196eb9ab
--- /dev/null
+++ b/arch/arm/mach-ns9xxx/include/mach/board.h
@@ -0,0 +1,42 @@
+/*
+ * arch/arm/mach-ns9xxx/include/mach/board.h
+ *
+ * Copyright (C) 2006,2007 by Digi International Inc.
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ */
+#ifndef __ASM_ARCH_BOARD_H
+#define __ASM_ARCH_BOARD_H
+
+#include <asm/mach-types.h>
+
+#define board_is_a9m9750dev()	(0			\
+		|| machine_is_cc9p9360dev()		\
+		|| machine_is_cc9p9750dev()		\
+		)
+
+#define board_is_a9mvali()	(0			\
+		|| machine_is_cc9p9360val() 		\
+		|| machine_is_cc9p9750val()		\
+		)
+
+#define board_is_jscc9p9210()	(0			\
+		|| machine_is_cc9p9210js()		\
+		)
+
+#define board_is_jscc9p9215()	(0			\
+		|| machine_is_cc9p9215js()		\
+		)
+
+#define board_is_jscc9p9360()	(0			\
+		|| machine_is_cc9p9360js()		\
+		)
+
+#define board_is_uncbas()	(0			\
+		|| machine_is_cc7ucamry()		\
+		)
+
+#endif /* ifndef __ASM_ARCH_BOARD_H */
diff --git a/arch/arm/mach-ns9xxx/include/mach/debug-macro.S b/arch/arm/mach-ns9xxx/include/mach/debug-macro.S
new file mode 100644
index 000000000000..c9530fba00aa
--- /dev/null
+++ b/arch/arm/mach-ns9xxx/include/mach/debug-macro.S
@@ -0,0 +1,22 @@
+/*
+ * arch/arm/mach-ns9xxx/include/mach/debug-macro.S
+ * Copyright (C) 2006 by Digi International Inc.
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ */
+#include <mach/hardware.h>
+
+#include <mach/regs-board-a9m9750dev.h>
+
+		.macro	addruart,rx
+		mrc	p15, 0, \rx, c1, c0
+		tst	\rx, #1
+		ldreq	\rx, =NS9XXX_CSxSTAT_PHYS(0)
+		ldrne	\rx, =io_p2v(NS9XXX_CSxSTAT_PHYS(0))
+		.endm
+
+#define UART_SHIFT	2
+#include <asm/hardware/debug-8250.S>
diff --git a/arch/arm/mach-ns9xxx/include/mach/dma.h b/arch/arm/mach-ns9xxx/include/mach/dma.h
new file mode 100644
index 000000000000..3f50d8c9e5c7
--- /dev/null
+++ b/arch/arm/mach-ns9xxx/include/mach/dma.h
@@ -0,0 +1,14 @@
+/*
+ * arch/arm/mach-ns9xxx/include/mach/dma.h
+ *
+ * Copyright (C) 2006 by Digi International Inc.
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ */
+#ifndef __ASM_ARCH_DMA_H
+#define __ASM_ARCH_DMA_H
+
+#endif /* ifndef __ASM_ARCH_DMA_H */
diff --git a/arch/arm/mach-ns9xxx/include/mach/entry-macro.S b/arch/arm/mach-ns9xxx/include/mach/entry-macro.S
new file mode 100644
index 000000000000..71ca0319b547
--- /dev/null
+++ b/arch/arm/mach-ns9xxx/include/mach/entry-macro.S
@@ -0,0 +1,28 @@
+/*
+ * arch/arm/mach-ns9xxx/include/mach/entry-macro.S
+ *
+ * Copyright (C) 2006,2007 by Digi International Inc.
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ */
+#include <mach/hardware.h>
+#include <mach/regs-sys-common.h>
+
+		.macro	get_irqnr_preamble, base, tmp
+		ldr	\base, =SYS_ISRADDR
+		.endm
+
+		.macro	arch_ret_to_user, tmp1, tmp2
+		.endm
+
+		.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
+		ldr	\irqstat, [\base, #(SYS_ISA - SYS_ISRADDR)]
+		cmp	\irqstat, #0
+		ldrne	\irqnr, [\base]
+		.endm
+
+		.macro	disable_fiq
+		.endm
diff --git a/arch/arm/mach-ns9xxx/include/mach/gpio.h b/arch/arm/mach-ns9xxx/include/mach/gpio.h
new file mode 100644
index 000000000000..5eb349032579
--- /dev/null
+++ b/arch/arm/mach-ns9xxx/include/mach/gpio.h
@@ -0,0 +1,47 @@
+/*
+ * arch/arm/mach-ns9xxx/include/mach/gpio.h
+ *
+ * Copyright (C) 2007 by Digi International Inc.
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+*/
+#ifndef __ASM_ARCH_GPIO_H
+#define __ASM_ARCH_GPIO_H
+
+#include <asm/errno.h>
+
+int gpio_request(unsigned gpio, const char *label);
+
+void gpio_free(unsigned gpio);
+
+int ns9xxx_gpio_configure(unsigned gpio, int inv, int func);
+
+int gpio_direction_input(unsigned gpio);
+
+int gpio_direction_output(unsigned gpio, int value);
+
+int gpio_get_value(unsigned gpio);
+
+void gpio_set_value(unsigned gpio, int value);
+
+/*
+ * ns9xxx can use gpio pins to trigger an irq, but it's not generic
+ * enough to be supported by the gpio_to_irq/irq_to_gpio interface
+ */
+static inline int gpio_to_irq(unsigned gpio)
+{
+	return -EINVAL;
+}
+
+static inline int irq_to_gpio(unsigned irq)
+{
+	return -EINVAL;
+}
+
+/* get the cansleep() stubs */
+#include <asm-generic/gpio.h>
+
+#endif /* ifndef __ASM_ARCH_GPIO_H */
diff --git a/arch/arm/mach-ns9xxx/include/mach/hardware.h b/arch/arm/mach-ns9xxx/include/mach/hardware.h
new file mode 100644
index 000000000000..6dbb2030f563
--- /dev/null
+++ b/arch/arm/mach-ns9xxx/include/mach/hardware.h
@@ -0,0 +1,79 @@
+/*
+ * arch/arm/mach-ns9xxx/include/mach/hardware.h
+ *
+ * Copyright (C) 2006 by Digi International Inc.
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ */
+#ifndef __ASM_ARCH_HARDWARE_H
+#define __ASM_ARCH_HARDWARE_H
+
+#include <asm/memory.h>
+
+/*
+ * NetSilicon NS9xxx internal mapping:
+ *
+ * physical                <--> virtual
+ * 0x90000000 - 0x906fffff <--> 0xf9000000 - 0xf96fffff
+ * 0xa0100000 - 0xa0afffff <--> 0xfa100000 - 0xfaafffff
+ */
+#define io_p2v(x)	(0xf0000000 \
+			 + (((x) & 0xf0000000) >> 4) \
+			 + ((x) & 0x00ffffff))
+
+#define io_v2p(x)	((((x) & 0x0f000000) << 4) \
+			 + ((x) & 0x00ffffff))
+
+#define __REGSHIFT(mask)	((mask) & (-(mask)))
+
+#define __REGBIT(bit)		((u32)1 << (bit))
+#define __REGBITS(hbit, lbit)	((((u32)1 << ((hbit) - (lbit) + 1)) - 1) << (lbit))
+#define __REGVAL(mask, value)	(((value) * __REGSHIFT(mask)) & (mask))
+
+#ifndef __ASSEMBLY__
+
+#  define __REG(x)	((void __iomem __force *)io_p2v((x)))
+#  define __REG2(x, y)	((void __iomem __force *)(io_p2v((x)) + 4 * (y)))
+
+#  define __REGSET(var, field, value)					\
+	((var) = (((var) & ~((field) & ~(value))) | (value)))
+
+#  define REGSET(var, reg, field, value)				\
+	__REGSET(var, reg ## _ ## field, reg ## _ ## field ## _ ## value)
+
+#  define REGSET_IDX(var, reg, field, idx, value)			\
+	__REGSET(var, reg ## _ ## field((idx)), reg ## _ ## field ## _ ## value((idx)))
+
+#  define REGSETIM(var, reg, field, value)				\
+	__REGSET(var, reg ## _ ## field, __REGVAL(reg ## _ ## field, (value)))
+
+#  define REGSETIM_IDX(var, reg, field, idx, value)			\
+	__REGSET(var, reg ## _ ## field((idx)), __REGVAL(reg ## _ ## field((idx)), (value)))
+
+#  define __REGGET(var, field)						\
+	(((var) & (field)))
+
+#  define REGGET(var, reg, field)					\
+	 __REGGET(var, reg ## _ ## field)
+
+#  define REGGET_IDX(var, reg, field, idx)				\
+	 __REGGET(var, reg ## _ ## field((idx)))
+
+#  define REGGETIM(var, reg, field)					\
+	 __REGGET(var, reg ## _ ## field) / __REGSHIFT(reg ## _ ## field)
+
+#  define REGGETIM_IDX(var, reg, field, idx)				\
+	 __REGGET(var, reg ## _ ## field((idx))) /			\
+	 __REGSHIFT(reg ## _ ## field((idx)))
+
+#else
+
+#  define __REG(x)	io_p2v(x)
+#  define __REG2(x, y)	io_p2v((x) + 4 * (y))
+
+#endif
+
+#endif /* ifndef __ASM_ARCH_HARDWARE_H */
diff --git a/arch/arm/mach-ns9xxx/include/mach/io.h b/arch/arm/mach-ns9xxx/include/mach/io.h
new file mode 100644
index 000000000000..027bf649645a
--- /dev/null
+++ b/arch/arm/mach-ns9xxx/include/mach/io.h
@@ -0,0 +1,20 @@
+/*
+ * arch/arm/mach-ns9xxx/include/mach/io.h
+ *
+ * Copyright (C) 2006 by Digi International Inc.
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ */
+#ifndef __ASM_ARCH_IO_H
+#define __ASM_ARCH_IO_H
+
+#define IO_SPACE_LIMIT  0xffffffff /* XXX */
+
+#define __io(a)         ((void __iomem *)(a))
+#define __mem_pci(a)    (a)
+#define __mem_isa(a)    (IO_BASE + (a))
+
+#endif /* ifndef __ASM_ARCH_IO_H */
diff --git a/arch/arm/mach-ns9xxx/include/mach/irqs.h b/arch/arm/mach-ns9xxx/include/mach/irqs.h
new file mode 100644
index 000000000000..13483949e210
--- /dev/null
+++ b/arch/arm/mach-ns9xxx/include/mach/irqs.h
@@ -0,0 +1,86 @@
+/*
+ * arch/arm/mach-ns9xxx/include/mach/irqs.h
+ *
+ * Copyright (C) 2006,2007 by Digi International Inc.
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ */
+#ifndef __ASM_ARCH_IRQS_H
+#define __ASM_ARCH_IRQS_H
+
+/* NetSilicon 9360 */
+#define IRQ_NS9XXX_WATCHDOG	0
+#define IRQ_NS9XXX_AHBBUSERR	1
+#define IRQ_NS9360_BBUSAGG	2
+/* irq 3 is reserved for NS9360 */
+#define IRQ_NS9XXX_ETHRX	4
+#define IRQ_NS9XXX_ETHTX	5
+#define IRQ_NS9XXX_ETHPHY	6
+#define IRQ_NS9360_LCD		7
+#define IRQ_NS9360_SERBRX	8
+#define IRQ_NS9360_SERBTX	9
+#define IRQ_NS9360_SERARX	10
+#define IRQ_NS9360_SERATX	11
+#define IRQ_NS9360_SERCRX	12
+#define IRQ_NS9360_SERCTX	13
+#define IRQ_NS9360_I2C		14
+#define IRQ_NS9360_BBUSDMA	15
+#define IRQ_NS9360_TIMER0	16
+#define IRQ_NS9360_TIMER1	17
+#define IRQ_NS9360_TIMER2	18
+#define IRQ_NS9360_TIMER3	19
+#define IRQ_NS9360_TIMER4	20
+#define IRQ_NS9360_TIMER5	21
+#define IRQ_NS9360_TIMER6	22
+#define IRQ_NS9360_TIMER7	23
+#define IRQ_NS9360_RTC		24
+#define IRQ_NS9360_USBHOST	25
+#define IRQ_NS9360_USBDEVICE	26
+#define IRQ_NS9360_IEEE1284	27
+#define IRQ_NS9XXX_EXT0		28
+#define IRQ_NS9XXX_EXT1		29
+#define IRQ_NS9XXX_EXT2		30
+#define IRQ_NS9XXX_EXT3		31
+
+#define BBUS_IRQ(irq)	(32 + irq)
+
+#define IRQ_BBUS_DMA		BBUS_IRQ(0)
+#define IRQ_BBUS_SERBRX		BBUS_IRQ(2)
+#define IRQ_BBUS_SERBTX		BBUS_IRQ(3)
+#define IRQ_BBUS_SERARX		BBUS_IRQ(4)
+#define IRQ_BBUS_SERATX		BBUS_IRQ(5)
+#define IRQ_BBUS_SERCRX		BBUS_IRQ(6)
+#define IRQ_BBUS_SERCTX		BBUS_IRQ(7)
+#define IRQ_BBUS_SERDRX		BBUS_IRQ(8)
+#define IRQ_BBUS_SERDTX		BBUS_IRQ(9)
+#define IRQ_BBUS_I2C		BBUS_IRQ(10)
+#define IRQ_BBUS_1284		BBUS_IRQ(11)
+#define IRQ_BBUS_UTIL		BBUS_IRQ(12)
+#define IRQ_BBUS_RTC		BBUS_IRQ(13)
+#define IRQ_BBUS_USBHST		BBUS_IRQ(14)
+#define IRQ_BBUS_USBDEV		BBUS_IRQ(15)
+#define IRQ_BBUS_AHBDMA1	BBUS_IRQ(24)
+#define IRQ_BBUS_AHBDMA2	BBUS_IRQ(25)
+
+/*
+ * these Interrupts are specific for the a9m9750dev board.
+ * They are generated by an FPGA that interrupts the CPU on
+ * IRQ_NS9360_EXT2
+ */
+#define FPGA_IRQ(irq)	(64 + irq)
+
+#define IRQ_FPGA_UARTA		FPGA_IRQ(0)
+#define IRQ_FPGA_UARTB		FPGA_IRQ(1)
+#define IRQ_FPGA_UARTC		FPGA_IRQ(2)
+#define IRQ_FPGA_UARTD		FPGA_IRQ(3)
+#define IRQ_FPGA_TOUCH		FPGA_IRQ(4)
+#define IRQ_FPGA_CF		FPGA_IRQ(5)
+#define IRQ_FPGA_CAN0		FPGA_IRQ(6)
+#define IRQ_FPGA_CAN1		FPGA_IRQ(7)
+
+#define NR_IRQS	72
+
+#endif /* __ASM_ARCH_IRQS_H */
diff --git a/arch/arm/mach-ns9xxx/include/mach/memory.h b/arch/arm/mach-ns9xxx/include/mach/memory.h
new file mode 100644
index 000000000000..649ee6235b94
--- /dev/null
+++ b/arch/arm/mach-ns9xxx/include/mach/memory.h
@@ -0,0 +1,27 @@
+/*
+ * arch/arm/mach-ns9xxx/include/mach/memory.h
+ *
+ * Copyright (C) 2006 by Digi International Inc.
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+*/
+#ifndef __ASM_ARCH_MEMORY_H
+#define __ASM_ARCH_MEMORY_H
+
+/* x in [0..3] */
+#define NS9XXX_CSxSTAT_PHYS(x)	UL(((x) + 4) << 28)
+
+#define NS9XXX_CS0STAT_LENGTH	UL(0x1000)
+#define NS9XXX_CS1STAT_LENGTH	UL(0x1000)
+#define NS9XXX_CS2STAT_LENGTH	UL(0x1000)
+#define NS9XXX_CS3STAT_LENGTH	UL(0x1000)
+
+#define PHYS_OFFSET	UL(0x00000000)
+
+#define __virt_to_bus(x) __virt_to_phys(x)
+#define __bus_to_virt(x) __phys_to_virt(x)
+
+#endif
diff --git a/arch/arm/mach-ns9xxx/include/mach/module.h b/arch/arm/mach-ns9xxx/include/mach/module.h
new file mode 100644
index 000000000000..f851a6b7da6c
--- /dev/null
+++ b/arch/arm/mach-ns9xxx/include/mach/module.h
@@ -0,0 +1,60 @@
+/*
+ * arch/arm/mach-ns9xxx/include/mach/module.h
+ *
+ * Copyright (C) 2007 by Digi International Inc.
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ */
+#ifndef __ASM_ARCH_MODULE_H
+#define __ASM_ARCH_MODULE_H
+
+#include <asm/mach-types.h>
+
+#define module_is_cc7ucamry()	(0			\
+		|| machine_is_cc7ucamry()		\
+		)
+
+#define module_is_cc9c()	(0			\
+		|| machine_is_cc9c()			\
+		)
+
+#define module_is_cc9p9210()	(0			\
+		|| machine_is_cc9p9210()		\
+		|| machine_is_cc9p9210js()		\
+		)
+
+#define module_is_cc9p9215()	(0			\
+		|| machine_is_cc9p9215()		\
+		|| machine_is_cc9p9215js()		\
+		)
+
+#define module_is_cc9p9360()	(0			\
+		|| machine_is_a9m9360()			\
+		|| machine_is_cc9p9360dev()		\
+		|| machine_is_cc9p9360js()		\
+		|| machine_is_cc9p9360val()		\
+		)
+
+#define module_is_cc9p9750()	(0			\
+		|| machine_is_a9m9750()			\
+		|| machine_is_cc9p9750dev()		\
+		|| machine_is_cc9p9750js()		\
+		|| machine_is_cc9p9750val()		\
+		)
+
+#define module_is_ccw9c()	(0			\
+		|| machine_is_ccw9c()			\
+		)
+
+#define module_is_inc20otter()	(0			\
+		|| machine_is_inc20otter()		\
+		)
+
+#define module_is_otter()	(0			\
+		|| machine_is_otter()			\
+		)
+
+#endif /* ifndef __ASM_ARCH_MODULE_H */
diff --git a/include/asm-arm/arch-ns9xxx/processor-ns9360.h b/arch/arm/mach-ns9xxx/include/mach/processor-ns9360.h
index f3aa6c50dbe5..f41deda5129e 100644
--- a/include/asm-arm/arch-ns9xxx/processor-ns9360.h
+++ b/arch/arm/mach-ns9xxx/include/mach/processor-ns9360.h
@@ -1,5 +1,5 @@
 /*
- * include/asm-arm/arch-ns9xxx/processor-ns9360.h
+ * arch/arm/mach-ns9xxx/include/mach/processor-ns9360.h
  *
  * Copyright (C) 2007 by Digi International Inc.
  * All rights reserved.
diff --git a/arch/arm/mach-ns9xxx/include/mach/processor.h b/arch/arm/mach-ns9xxx/include/mach/processor.h
new file mode 100644
index 000000000000..9f77f746a386
--- /dev/null
+++ b/arch/arm/mach-ns9xxx/include/mach/processor.h
@@ -0,0 +1,42 @@
+/*
+ * arch/arm/mach-ns9xxx/include/mach/processor.h
+ *
+ * Copyright (C) 2006,2007 by Digi International Inc.
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ */
+#ifndef __ASM_ARCH_PROCESSOR_H
+#define __ASM_ARCH_PROCESSOR_H
+
+#include <mach/module.h>
+
+#define processor_is_ns9210()	(0			\
+		|| module_is_cc7ucamry()		\
+		|| module_is_cc9p9210()			\
+		|| module_is_inc20otter()		\
+		|| module_is_otter()			\
+		)
+
+#define processor_is_ns9215()	(0			\
+		|| module_is_cc9p9215()			\
+		)
+
+#define processor_is_ns9360()	(0			\
+		|| module_is_cc9p9360()			\
+		|| module_is_cc9c()			\
+		|| module_is_ccw9c()			\
+		)
+
+#define processor_is_ns9750()	(0			\
+		|| module_is_cc9p9750()			\
+		)
+
+#define processor_is_ns921x()	(0			\
+		|| processor_is_ns9210()		\
+		|| processor_is_ns9215()		\
+		)
+
+#endif /* ifndef __ASM_ARCH_PROCESSOR_H */
diff --git a/include/asm-arm/arch-ns9xxx/regs-bbu.h b/arch/arm/mach-ns9xxx/include/mach/regs-bbu.h
index 7ee194dc6354..af227c058fb9 100644
--- a/include/asm-arm/arch-ns9xxx/regs-bbu.h
+++ b/arch/arm/mach-ns9xxx/include/mach/regs-bbu.h
@@ -1,5 +1,5 @@
 /*
- * include/asm-arm/arch-ns9xxx/regs-bbu.h
+ * arch/arm/mach-ns9xxx/include/mach/regs-bbu.h
  *
  * Copyright (C) 2006 by Digi International Inc.
  * All rights reserved.
@@ -11,7 +11,7 @@
 #ifndef __ASM_ARCH_REGSBBU_H
 #define __ASM_ARCH_REGSBBU_H
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 
 /* BBus Utility */
 
diff --git a/include/asm-arm/arch-ns9xxx/regs-board-a9m9750dev.h b/arch/arm/mach-ns9xxx/include/mach/regs-board-a9m9750dev.h
index afa3a9db3e1d..cd1593693f56 100644
--- a/include/asm-arm/arch-ns9xxx/regs-board-a9m9750dev.h
+++ b/arch/arm/mach-ns9xxx/include/mach/regs-board-a9m9750dev.h
@@ -1,5 +1,5 @@
 /*
- * include/asm-arm/arch-ns9xxx/regs-board-a9m9750dev.h
+ * arch/arm/mach-ns9xxx/include/mach/regs-board-a9m9750dev.h
  *
  * Copyright (C) 2006 by Digi International Inc.
  * All rights reserved.
@@ -11,7 +11,7 @@
 #ifndef __ASM_ARCH_REGSBOARDA9M9750_H
 #define __ASM_ARCH_REGSBOARDA9M9750_H
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 
 #define FPGA_UARTA_BASE	io_p2v(NS9XXX_CSxSTAT_PHYS(0))
 #define FPGA_UARTB_BASE	io_p2v(NS9XXX_CSxSTAT_PHYS(0) + 0x08)
diff --git a/arch/arm/mach-ns9xxx/include/mach/regs-mem.h b/arch/arm/mach-ns9xxx/include/mach/regs-mem.h
new file mode 100644
index 000000000000..f1625bf8cdce
--- /dev/null
+++ b/arch/arm/mach-ns9xxx/include/mach/regs-mem.h
@@ -0,0 +1,135 @@
+/*
+ * arch/arm/mach-ns9xxx/include/mach/regs-mem.h
+ *
+ * Copyright (C) 2006 by Digi International Inc.
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ */
+#ifndef __ASM_ARCH_REGSMEM_H
+#define __ASM_ARCH_REGSMEM_H
+
+#include <mach/hardware.h>
+
+/* Memory Module */
+
+/* Control register */
+#define MEM_CTRL	__REG(0xa0700000)
+
+/* Status register */
+#define MEM_STAT	__REG(0xa0700004)
+
+/* Configuration register */
+#define MEM_CONF	__REG(0xa0700008)
+
+/* Dynamic Memory Control register */
+#define MEM_DMCTRL	__REG(0xa0700020)
+
+/* Dynamic Memory Refresh Timer */
+#define MEM_DMRT	__REG(0xa0700024)
+
+/* Dynamic Memory Read Configuration register */
+#define MEM_DMRC	__REG(0xa0700028)
+
+/* Dynamic Memory Precharge Command Period (tRP) */
+#define MEM_DMPCP	__REG(0xa0700030)
+
+/* Dynamic Memory Active to Precharge Command Period (tRAS) */
+#define MEM_DMAPCP	__REG(0xa0700034)
+
+/* Dynamic Memory Self-Refresh Exit Time (tSREX) */
+#define MEM_DMSRET	__REG(0xa0700038)
+
+/* Dynamic Memory Last Data Out to Active Time (tAPR) */
+#define MEM_DMLDOAT	__REG(0xa070003c)
+
+/* Dynamic Memory Data-in to Active Command Time (tDAL or TAPW) */
+#define MEM_DMDIACT	__REG(0xa0700040)
+
+/* Dynamic Memory Write Recovery Time (tWR, tDPL, tRWL, tRDL) */
+#define MEM_DMWRT	__REG(0xa0700044)
+
+/* Dynamic Memory Active to Active Command Period (tRC) */
+#define MEM_DMAACP	__REG(0xa0700048)
+
+/* Dynamic Memory Auto Refresh Period, and Auto Refresh to Active Command Period (tRFC) */
+#define MEM_DMARP	__REG(0xa070004c)
+
+/* Dynamic Memory Exit Self-Refresh to Active Command (tXSR) */
+#define MEM_DMESRAC	__REG(0xa0700050)
+
+/* Dynamic Memory Active Bank A to Active B Time (tRRD) */
+#define MEM_DMABAABT	__REG(0xa0700054)
+
+/* Dynamic Memory Load Mode register to Active Command Time (tMRD) */
+#define MEM_DMLMACT	__REG(0xa0700058)
+
+/* Static Memory Extended Wait */
+#define MEM_SMEW	__REG(0xa0700080)
+
+/* Dynamic Memory Configuration Register x */
+#define MEM_DMCONF(x) 	__REG2(0xa0700100, (x) << 3)
+
+/* Dynamic Memory RAS and CAS Delay x */
+#define MEM_DMRCD(x)	__REG2(0xa0700104, (x) << 3)
+
+/* Static Memory Configuration Register x */
+#define MEM_SMC(x)	__REG2(0xa0700200, (x) << 3)
+
+/* Static Memory Configuration Register x: Write protect */
+#define MEM_SMC_PSMC		__REGBIT(20)
+#define MEM_SMC_PSMC_OFF		__REGVAL(MEM_SMC_PSMC, 0)
+#define MEM_SMC_PSMC_ON			__REGVAL(MEM_SMC_PSMC, 1)
+
+/* Static Memory Configuration Register x: Buffer enable */
+#define MEM_SMC_BSMC		__REGBIT(19)
+#define MEM_SMC_BSMC_OFF		__REGVAL(MEM_SMC_BSMC, 0)
+#define MEM_SMC_BSMC_ON			__REGVAL(MEM_SMC_BSMC, 1)
+
+/* Static Memory Configuration Register x: Extended Wait */
+#define MEM_SMC_EW		__REGBIT(8)
+#define MEM_SMC_EW_OFF			__REGVAL(MEM_SMC_EW, 0)
+#define MEM_SMC_EW_ON			__REGVAL(MEM_SMC_EW, 1)
+
+/* Static Memory Configuration Register x: Byte lane state */
+#define MEM_SMC_PB		__REGBIT(7)
+#define MEM_SMC_PB_0			__REGVAL(MEM_SMC_PB, 0)
+#define MEM_SMC_PB_1			__REGVAL(MEM_SMC_PB, 1)
+
+/* Static Memory Configuration Register x: Chip select polarity */
+#define MEM_SMC_PC		__REGBIT(6)
+#define MEM_SMC_PC_AL			__REGVAL(MEM_SMC_PC, 0)
+#define MEM_SMC_PC_AH			__REGVAL(MEM_SMC_PC, 1)
+
+/* static memory configuration register x: page mode*/
+#define MEM_SMC_PM		__REGBIT(3)
+#define MEM_SMC_PM_DIS			__REGVAL(MEM_SMC_PM, 0)
+#define MEM_SMC_PM_ASYNC		__REGVAL(MEM_SMC_PM, 1)
+
+/* static memory configuration register x: Memory width */
+#define MEM_SMC_MW		__REGBITS(1, 0)
+#define MEM_SMC_MW_8			__REGVAL(MEM_SMC_MW, 0)
+#define MEM_SMC_MW_16			__REGVAL(MEM_SMC_MW, 1)
+#define MEM_SMC_MW_32			__REGVAL(MEM_SMC_MW, 2)
+
+/* Static Memory Write Enable Delay x */
+#define MEM_SMWED(x)	__REG2(0xa0700204, (x) << 3)
+
+/* Static Memory Output Enable Delay x */
+#define MEM_SMOED(x)	__REG2(0xa0700208, (x) << 3)
+
+/* Static Memory Read Delay x */
+#define MEM_SMRD(x)	__REG2(0xa070020c, (x) << 3)
+
+/* Static Memory Page Mode Read Delay 0 */
+#define MEM_SMPMRD(x)	__REG2(0xa0700210, (x) << 3)
+
+/* Static Memory Write Delay */
+#define MEM_SMWD(x)	__REG2(0xa0700214, (x) << 3)
+
+/* Static Memory Turn Round Delay x */
+#define MEM_SWT(x)	__REG2(0xa0700218, (x) << 3)
+
+#endif /* ifndef __ASM_ARCH_REGSMEM_H */
diff --git a/include/asm-arm/arch-ns9xxx/regs-sys-common.h b/arch/arm/mach-ns9xxx/include/mach/regs-sys-common.h
index 956c57cb781f..14f91dfd5736 100644
--- a/include/asm-arm/arch-ns9xxx/regs-sys-common.h
+++ b/arch/arm/mach-ns9xxx/include/mach/regs-sys-common.h
@@ -1,5 +1,5 @@
 /*
- * include/asm-arm/arch-ns9xxx/regs-sys-common.h
+ * arch/arm/mach-ns9xxx/include/mach/regs-sys-common.h
  *
  * Copyright (C) 2007 by Digi International Inc.
  * All rights reserved.
@@ -11,7 +11,7 @@
 
 #ifndef __ASM_ARCH_REGSSYSCOMMON_H
 #define __ASM_ARCH_REGSSYSCOMMON_H
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 
 /* Interrupt Vector Address Register Level x */
 #define SYS_IVA(x)	__REG2(0xa09000c4, (x))
diff --git a/include/asm-arm/arch-ns9xxx/regs-sys-ns9360.h b/arch/arm/mach-ns9xxx/include/mach/regs-sys-ns9360.h
index 318b6945afb6..8ff254d9901c 100644
--- a/include/asm-arm/arch-ns9xxx/regs-sys-ns9360.h
+++ b/arch/arm/mach-ns9xxx/include/mach/regs-sys-ns9360.h
@@ -1,5 +1,5 @@
 /*
- * include/asm-arm/arch-ns9xxx/regs-sys-ns9360.h
+ * arch/arm/mach-ns9xxx/include/mach/regs-sys-ns9360.h
  *
  * Copyright (C) 2006,2007 by Digi International Inc.
  * All rights reserved.
@@ -11,7 +11,7 @@
 #ifndef __ASM_ARCH_REGSSYSNS9360_H
 #define __ASM_ARCH_REGSSYSNS9360_H
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 
 /* System Control Module */
 
diff --git a/arch/arm/mach-ns9xxx/include/mach/system.h b/arch/arm/mach-ns9xxx/include/mach/system.h
new file mode 100644
index 000000000000..e2068c57415f
--- /dev/null
+++ b/arch/arm/mach-ns9xxx/include/mach/system.h
@@ -0,0 +1,35 @@
+/*
+ * arch/arm/mach-ns9xxx/include/mach/system.h
+ *
+ * Copyright (C) 2006,2007 by Digi International Inc.
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ */
+#ifndef __ASM_ARCH_SYSTEM_H
+#define __ASM_ARCH_SYSTEM_H
+
+#include <asm/proc-fns.h>
+#include <mach/processor.h>
+#include <mach/processor-ns9360.h>
+
+static inline void arch_idle(void)
+{
+	cpu_do_idle();
+}
+
+static inline void arch_reset(char mode)
+{
+#ifdef CONFIG_PROCESSOR_NS9360
+	if (processor_is_ns9360())
+		ns9360_reset(mode);
+	else
+#endif
+		BUG();
+
+	BUG();
+}
+
+#endif /* ifndef __ASM_ARCH_SYSTEM_H */
diff --git a/arch/arm/mach-ns9xxx/include/mach/timex.h b/arch/arm/mach-ns9xxx/include/mach/timex.h
new file mode 100644
index 000000000000..734a8d8bd578
--- /dev/null
+++ b/arch/arm/mach-ns9xxx/include/mach/timex.h
@@ -0,0 +1,20 @@
+/*
+ * arch/arm/mach-ns9xxx/include/mach/timex.h
+ *
+ * Copyright (C) 2005-2006 by Digi International Inc.
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ */
+#ifndef __ASM_ARCH_TIMEX_H
+#define __ASM_ARCH_TIMEX_H
+
+/*
+ * value for CLOCK_TICK_RATE stolen from arch/arm/mach-s3c2410/include/mach/timex.h.
+ * See there for an explanation.
+ */
+#define CLOCK_TICK_RATE         12000000
+
+#endif /* ifndef __ASM_ARCH_TIMEX_H */
diff --git a/arch/arm/mach-ns9xxx/include/mach/uncompress.h b/arch/arm/mach-ns9xxx/include/mach/uncompress.h
new file mode 100644
index 000000000000..5dbc3c5167c8
--- /dev/null
+++ b/arch/arm/mach-ns9xxx/include/mach/uncompress.h
@@ -0,0 +1,164 @@
+/*
+ * arch/arm/mach-ns9xxx/include/mach/uncompress.h
+ *
+ * Copyright (C) 2006 by Digi International Inc.
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ */
+#ifndef __ASM_ARCH_UNCOMPRESS_H
+#define __ASM_ARCH_UNCOMPRESS_H
+
+#include <asm/io.h>
+
+#define __REG(x)	((void __iomem __force *)(x))
+
+static void putc_dummy(char c, void __iomem *base)
+{
+	/* nothing */
+}
+
+static void putc_ns9360(char c, void __iomem *base)
+{
+	static int t = 0x10000;
+	do {
+		if (t)
+			--t;
+
+		if (__raw_readl(base + 8) & (1 << 3)) {
+			__raw_writeb(c, base + 16);
+			t = 0x10000;
+			break;
+		}
+	} while (t);
+}
+
+static void putc_a9m9750dev(char c, void __iomem *base)
+{
+	static int t = 0x10000;
+	do {
+		if (t)
+			--t;
+
+		if (__raw_readb(base + 5) & (1 << 5)) {
+			__raw_writeb(c, base);
+			t = 0x10000;
+			break;
+		}
+	} while (t);
+
+}
+
+static void putc_ns921x(char c, void __iomem *base)
+{
+	static int t = 0x10000;
+	do {
+		if (t)
+			--t;
+
+		if (!(__raw_readl(base) & (1 << 11))) {
+			__raw_writeb(c, base + 0x0028);
+			t = 0x10000;
+			break;
+		}
+	} while (t);
+}
+
+#define MSCS __REG(0xA0900184)
+
+#define NS9360_UARTA	__REG(0x90200040)
+#define NS9360_UARTB	__REG(0x90200000)
+#define NS9360_UARTC	__REG(0x90300000)
+#define NS9360_UARTD	__REG(0x90300040)
+
+#define NS9360_UART_ENABLED(base)					\
+		(__raw_readl(NS9360_UARTA) & (1 << 31))
+
+#define A9M9750DEV_UARTA	__REG(0x40000000)
+
+#define NS921XSYS_CLOCK	__REG(0xa090017c)
+#define NS921X_UARTA	__REG(0x90010000)
+#define NS921X_UARTB	__REG(0x90018000)
+#define NS921X_UARTC	__REG(0x90020000)
+#define NS921X_UARTD	__REG(0x90028000)
+
+#define NS921X_UART_ENABLED(base)					\
+		(__raw_readl((base) + 0x1000) & (1 << 29))
+
+static void autodetect(void (**putc)(char, void __iomem *), void __iomem **base)
+{
+	if (((__raw_readl(MSCS) >> 16) & 0xfe) == 0x00) {
+		/* ns9360 or ns9750 */
+		if (NS9360_UART_ENABLED(NS9360_UARTA)) {
+			*putc = putc_ns9360;
+			*base = NS9360_UARTA;
+			return;
+		} else if (NS9360_UART_ENABLED(NS9360_UARTB)) {
+			*putc = putc_ns9360;
+			*base = NS9360_UARTB;
+			return;
+		} else if (NS9360_UART_ENABLED(NS9360_UARTC)) {
+			*putc = putc_ns9360;
+			*base = NS9360_UARTC;
+			return;
+		} else if (NS9360_UART_ENABLED(NS9360_UARTD)) {
+			*putc = putc_ns9360;
+			*base = NS9360_UARTD;
+			return;
+		} else if (__raw_readl(__REG(0xa09001f4)) == 0xfffff001) {
+			*putc = putc_a9m9750dev;
+			*base = A9M9750DEV_UARTA;
+			return;
+		}
+	} else if (((__raw_readl(MSCS) >> 16) & 0xfe) == 0x02) {
+		/* ns921x */
+		u32 clock = __raw_readl(NS921XSYS_CLOCK);
+
+		if ((clock & (1 << 1)) &&
+				NS921X_UART_ENABLED(NS921X_UARTA)) {
+			*putc = putc_ns921x;
+			*base = NS921X_UARTA;
+			return;
+		} else if ((clock & (1 << 2)) &&
+				NS921X_UART_ENABLED(NS921X_UARTB)) {
+			*putc = putc_ns921x;
+			*base = NS921X_UARTB;
+			return;
+		} else if ((clock & (1 << 3)) &&
+				NS921X_UART_ENABLED(NS921X_UARTC)) {
+			*putc = putc_ns921x;
+			*base = NS921X_UARTC;
+			return;
+		} else if ((clock & (1 << 4)) &&
+				NS921X_UART_ENABLED(NS921X_UARTD)) {
+			*putc = putc_ns921x;
+			*base = NS921X_UARTD;
+			return;
+		}
+	}
+
+	*putc = putc_dummy;
+}
+
+void (*myputc)(char, void __iomem *);
+void __iomem *base;
+
+static void putc(char c)
+{
+	myputc(c, base);
+}
+
+static void arch_decomp_setup(void)
+{
+	autodetect(&myputc, &base);
+}
+#define arch_decomp_wdog()
+
+static void flush(void)
+{
+	/* nothing */
+}
+
+#endif /* ifndef __ASM_ARCH_UNCOMPRESS_H */
diff --git a/arch/arm/mach-ns9xxx/include/mach/vmalloc.h b/arch/arm/mach-ns9xxx/include/mach/vmalloc.h
new file mode 100644
index 000000000000..fe964d3bcc47
--- /dev/null
+++ b/arch/arm/mach-ns9xxx/include/mach/vmalloc.h
@@ -0,0 +1,16 @@
+/*
+ * arch/arm/mach-ns9xxx/include/mach/vmalloc.h
+ *
+ * Copyright (C) 2006 by Digi International Inc.
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ */
+#ifndef __ASM_ARCH_VMALLOC_H
+#define __ASM_ARCH_VMALLOC_H
+
+#define VMALLOC_END     (0xf0000000)
+
+#endif /* ifndef __ASM_ARCH_VMALLOC_H */
diff --git a/arch/arm/mach-ns9xxx/irq.c b/arch/arm/mach-ns9xxx/irq.c
index ca85d24cf39f..38260d5f849b 100644
--- a/arch/arm/mach-ns9xxx/irq.c
+++ b/arch/arm/mach-ns9xxx/irq.c
@@ -12,10 +12,9 @@
 #include <linux/kernel_stat.h>
 #include <asm/io.h>
 #include <asm/mach/irq.h>
-#include <asm/mach-types.h>
-#include <asm/arch-ns9xxx/regs-sys-common.h>
-#include <asm/arch-ns9xxx/irqs.h>
-#include <asm/arch-ns9xxx/board.h>
+#include <mach/regs-sys-common.h>
+#include <mach/irqs.h>
+#include <mach/board.h>
 
 #include "generic.h"
 
diff --git a/arch/arm/mach-ns9xxx/mach-cc9p9360dev.c b/arch/arm/mach-ns9xxx/mach-cc9p9360dev.c
index 9623fff6b3bc..2858417d8d8a 100644
--- a/arch/arm/mach-ns9xxx/mach-cc9p9360dev.c
+++ b/arch/arm/mach-ns9xxx/mach-cc9p9360dev.c
@@ -11,7 +11,7 @@
 #include <asm/mach/arch.h>
 #include <asm/mach-types.h>
 
-#include <asm/arch-ns9xxx/processor-ns9360.h>
+#include <mach/processor-ns9360.h>
 
 #include "board-a9m9750dev.h"
 #include "generic.h"
diff --git a/arch/arm/mach-ns9xxx/mach-cc9p9360js.c b/arch/arm/mach-ns9xxx/mach-cc9p9360js.c
index fcc815bdd291..729f68da4293 100644
--- a/arch/arm/mach-ns9xxx/mach-cc9p9360js.c
+++ b/arch/arm/mach-ns9xxx/mach-cc9p9360js.c
@@ -11,7 +11,7 @@
 #include <asm/mach/arch.h>
 #include <asm/mach-types.h>
 
-#include <asm/arch-ns9xxx/processor-ns9360.h>
+#include <mach/processor-ns9360.h>
 
 #include "board-jscc9p9360.h"
 #include "generic.h"
diff --git a/arch/arm/mach-ns9xxx/plat-serial8250.c b/arch/arm/mach-ns9xxx/plat-serial8250.c
index 5aa5d9baf8c8..795b15e8982a 100644
--- a/arch/arm/mach-ns9xxx/plat-serial8250.c
+++ b/arch/arm/mach-ns9xxx/plat-serial8250.c
@@ -11,8 +11,8 @@
 #include <linux/platform_device.h>
 #include <linux/serial_8250.h>
 
-#include <asm/arch-ns9xxx/regs-board-a9m9750dev.h>
-#include <asm/arch-ns9xxx/board.h>
+#include <mach/regs-board-a9m9750dev.h>
+#include <mach/board.h>
 
 #define DRIVER_NAME "serial8250"
 
diff --git a/arch/arm/mach-ns9xxx/processor-ns9360.c b/arch/arm/mach-ns9xxx/processor-ns9360.c
index 2bee0b7fccbb..abee8338735d 100644
--- a/arch/arm/mach-ns9xxx/processor-ns9360.c
+++ b/arch/arm/mach-ns9xxx/processor-ns9360.c
@@ -14,8 +14,8 @@
 
 #include <asm/page.h>
 #include <asm/mach/map.h>
-#include <asm/arch-ns9xxx/processor-ns9360.h>
-#include <asm/arch-ns9xxx/regs-sys-ns9360.h>
+#include <mach/processor-ns9360.h>
+#include <mach/regs-sys-ns9360.h>
 
 void ns9360_reset(char mode)
 {
diff --git a/arch/arm/mach-ns9xxx/time-ns9360.c b/arch/arm/mach-ns9xxx/time-ns9360.c
index 4d573c9793ed..a63424d083d9 100644
--- a/arch/arm/mach-ns9xxx/time-ns9360.c
+++ b/arch/arm/mach-ns9xxx/time-ns9360.c
@@ -15,10 +15,10 @@
 #include <linux/clocksource.h>
 #include <linux/clockchips.h>
 
-#include <asm/arch-ns9xxx/processor-ns9360.h>
-#include <asm/arch-ns9xxx/regs-sys-ns9360.h>
-#include <asm/arch-ns9xxx/irqs.h>
-#include <asm/arch/system.h>
+#include <mach/processor-ns9360.h>
+#include <mach/regs-sys-ns9360.h>
+#include <mach/irqs.h>
+#include <mach/system.h>
 #include "generic.h"
 
 #define TIMER_CLOCKSOURCE 0
diff --git a/arch/arm/mach-omap1/board-ams-delta.c b/arch/arm/mach-omap1/board-ams-delta.c
index 8b102ad59c14..2e618391cc51 100644
--- a/arch/arm/mach-omap1/board-ams-delta.c
+++ b/arch/arm/mach-omap1/board-ams-delta.c
@@ -17,18 +17,18 @@
 #include <linux/input.h>
 #include <linux/platform_device.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 
-#include <asm/arch/board-ams-delta.h>
-#include <asm/arch/gpio.h>
-#include <asm/arch/keypad.h>
-#include <asm/arch/mux.h>
-#include <asm/arch/usb.h>
-#include <asm/arch/board.h>
-#include <asm/arch/common.h>
+#include <mach/board-ams-delta.h>
+#include <mach/gpio.h>
+#include <mach/keypad.h>
+#include <mach/mux.h>
+#include <mach/usb.h>
+#include <mach/board.h>
+#include <mach/common.h>
 
 static u8 ams_delta_latch1_reg;
 static u16 ams_delta_latch2_reg;
diff --git a/arch/arm/mach-omap1/board-fsample.c b/arch/arm/mach-omap1/board-fsample.c
index 1bdb66638e29..db789461fca4 100644
--- a/arch/arm/mach-omap1/board-fsample.c
+++ b/arch/arm/mach-omap1/board-fsample.c
@@ -20,21 +20,21 @@
 #include <linux/mtd/partitions.h>
 #include <linux/input.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/flash.h>
 #include <asm/mach/map.h>
 
-#include <asm/arch/tc.h>
-#include <asm/arch/gpio.h>
-#include <asm/arch/mux.h>
-#include <asm/arch/fpga.h>
-#include <asm/arch/nand.h>
-#include <asm/arch/keypad.h>
-#include <asm/arch/common.h>
-#include <asm/arch/board.h>
-#include <asm/arch/board-fsample.h>
+#include <mach/tc.h>
+#include <mach/gpio.h>
+#include <mach/mux.h>
+#include <mach/fpga.h>
+#include <mach/nand.h>
+#include <mach/keypad.h>
+#include <mach/common.h>
+#include <mach/board.h>
+#include <mach/board-fsample.h>
 
 static int fsample_keymap[] = {
 	KEY(0,0,KEY_UP),
diff --git a/arch/arm/mach-omap1/board-generic.c b/arch/arm/mach-omap1/board-generic.c
index c711bf23f7b4..7d2670205373 100644
--- a/arch/arm/mach-omap1/board-generic.c
+++ b/arch/arm/mach-omap1/board-generic.c
@@ -17,16 +17,16 @@
 #include <linux/init.h>
 #include <linux/platform_device.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 
-#include <asm/arch/gpio.h>
-#include <asm/arch/mux.h>
-#include <asm/arch/usb.h>
-#include <asm/arch/board.h>
-#include <asm/arch/common.h>
+#include <mach/gpio.h>
+#include <mach/mux.h>
+#include <mach/usb.h>
+#include <mach/board.h>
+#include <mach/common.h>
 
 static void __init omap_generic_init_irq(void)
 {
diff --git a/arch/arm/mach-omap1/board-h2-mmc.c b/arch/arm/mach-omap1/board-h2-mmc.c
index 6fdc78406b21..ab9ee5820c48 100644
--- a/arch/arm/mach-omap1/board-h2-mmc.c
+++ b/arch/arm/mach-omap1/board-h2-mmc.c
@@ -12,8 +12,8 @@
  * published by the Free Software Foundation.
  */
 
-#include <asm/arch/mmc.h>
-#include <asm/arch/gpio.h>
+#include <mach/mmc.h>
+#include <mach/gpio.h>
 
 #ifdef CONFIG_MMC_OMAP
 static int slot_cover_open;
diff --git a/arch/arm/mach-omap1/board-h2.c b/arch/arm/mach-omap1/board-h2.c
index 4b444fdaafea..3b65914b9141 100644
--- a/arch/arm/mach-omap1/board-h2.c
+++ b/arch/arm/mach-omap1/board-h2.c
@@ -29,7 +29,7 @@
 #include <linux/input.h>
 #include <linux/i2c/tps65010.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/gpio.h>
 
 #include <asm/mach-types.h>
@@ -37,16 +37,16 @@
 #include <asm/mach/flash.h>
 #include <asm/mach/map.h>
 
-#include <asm/arch/gpio-switch.h>
-#include <asm/arch/mux.h>
-#include <asm/arch/tc.h>
-#include <asm/arch/nand.h>
-#include <asm/arch/irda.h>
-#include <asm/arch/usb.h>
-#include <asm/arch/keypad.h>
-#include <asm/arch/common.h>
-#include <asm/arch/mcbsp.h>
-#include <asm/arch/omap-alsa.h>
+#include <mach/gpio-switch.h>
+#include <mach/mux.h>
+#include <mach/tc.h>
+#include <mach/nand.h>
+#include <mach/irda.h>
+#include <mach/usb.h>
+#include <mach/keypad.h>
+#include <mach/common.h>
+#include <mach/mcbsp.h>
+#include <mach/omap-alsa.h>
 
 static int h2_keymap[] = {
 	KEY(0, 0, KEY_LEFT),
diff --git a/arch/arm/mach-omap1/board-h3-mmc.c b/arch/arm/mach-omap1/board-h3-mmc.c
index 66ecc437928f..36085819098c 100644
--- a/arch/arm/mach-omap1/board-h3-mmc.c
+++ b/arch/arm/mach-omap1/board-h3-mmc.c
@@ -12,8 +12,8 @@
  * published by the Free Software Foundation.
  */
 
-#include <asm/arch/mmc.h>
-#include <asm/arch/gpio.h>
+#include <mach/mmc.h>
+#include <mach/gpio.h>
 
 #ifdef CONFIG_MMC_OMAP
 static int slot_cover_open;
diff --git a/arch/arm/mach-omap1/board-h3.c b/arch/arm/mach-omap1/board-h3.c
index 7fbaa8d648cd..2ced6d9984d2 100644
--- a/arch/arm/mach-omap1/board-h3.c
+++ b/arch/arm/mach-omap1/board-h3.c
@@ -31,7 +31,7 @@
 
 #include <asm/setup.h>
 #include <asm/page.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/gpio.h>
 
 #include <asm/mach-types.h>
@@ -39,18 +39,18 @@
 #include <asm/mach/flash.h>
 #include <asm/mach/map.h>
 
-#include <asm/arch/gpioexpander.h>
-#include <asm/arch/irqs.h>
-#include <asm/arch/mux.h>
-#include <asm/arch/tc.h>
-#include <asm/arch/nand.h>
-#include <asm/arch/irda.h>
-#include <asm/arch/usb.h>
-#include <asm/arch/keypad.h>
-#include <asm/arch/dma.h>
-#include <asm/arch/common.h>
-#include <asm/arch/mcbsp.h>
-#include <asm/arch/omap-alsa.h>
+#include <mach/gpioexpander.h>
+#include <mach/irqs.h>
+#include <mach/mux.h>
+#include <mach/tc.h>
+#include <mach/nand.h>
+#include <mach/irda.h>
+#include <mach/usb.h>
+#include <mach/keypad.h>
+#include <mach/dma.h>
+#include <mach/common.h>
+#include <mach/mcbsp.h>
+#include <mach/omap-alsa.h>
 
 #define H3_TS_GPIO	48
 
diff --git a/arch/arm/mach-omap1/board-innovator.c b/arch/arm/mach-omap1/board-innovator.c
index 4b8ae3ee0d05..cbc11be5cd2a 100644
--- a/arch/arm/mach-omap1/board-innovator.c
+++ b/arch/arm/mach-omap1/board-innovator.c
@@ -24,21 +24,21 @@
 #include <linux/mtd/partitions.h>
 #include <linux/input.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/flash.h>
 #include <asm/mach/map.h>
 
-#include <asm/arch/mux.h>
-#include <asm/arch/fpga.h>
-#include <asm/arch/gpio.h>
-#include <asm/arch/tc.h>
-#include <asm/arch/usb.h>
-#include <asm/arch/keypad.h>
-#include <asm/arch/common.h>
-#include <asm/arch/mcbsp.h>
-#include <asm/arch/omap-alsa.h>
+#include <mach/mux.h>
+#include <mach/fpga.h>
+#include <mach/gpio.h>
+#include <mach/tc.h>
+#include <mach/usb.h>
+#include <mach/keypad.h>
+#include <mach/common.h>
+#include <mach/mcbsp.h>
+#include <mach/omap-alsa.h>
 
 static int innovator_keymap[] = {
 	KEY(0, 0, KEY_F1),
diff --git a/arch/arm/mach-omap1/board-nokia770.c b/arch/arm/mach-omap1/board-nokia770.c
index 3f39e0e79c9f..38d9783ac6d6 100644
--- a/arch/arm/mach-omap1/board-nokia770.c
+++ b/arch/arm/mach-omap1/board-nokia770.c
@@ -20,21 +20,21 @@
 #include <linux/workqueue.h>
 #include <linux/delay.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 
-#include <asm/arch/gpio.h>
-#include <asm/arch/mux.h>
-#include <asm/arch/usb.h>
-#include <asm/arch/board.h>
-#include <asm/arch/keypad.h>
-#include <asm/arch/common.h>
-#include <asm/arch/dsp_common.h>
-#include <asm/arch/aic23.h>
-#include <asm/arch/omapfb.h>
-#include <asm/arch/lcd_mipid.h>
+#include <mach/gpio.h>
+#include <mach/mux.h>
+#include <mach/usb.h>
+#include <mach/board.h>
+#include <mach/keypad.h>
+#include <mach/common.h>
+#include <mach/dsp_common.h>
+#include <mach/aic23.h>
+#include <mach/omapfb.h>
+#include <mach/lcd_mipid.h>
 
 #define ADS7846_PENDOWN_GPIO	15
 
diff --git a/arch/arm/mach-omap1/board-osk.c b/arch/arm/mach-omap1/board-osk.c
index 845c66371ca3..3e766e49f7cc 100644
--- a/arch/arm/mach-omap1/board-osk.c
+++ b/arch/arm/mach-omap1/board-osk.c
@@ -39,7 +39,7 @@
 
 #include <linux/i2c/tps65010.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/gpio.h>
 
 #include <asm/mach-types.h>
@@ -47,12 +47,12 @@
 #include <asm/mach/map.h>
 #include <asm/mach/flash.h>
 
-#include <asm/arch/usb.h>
-#include <asm/arch/mux.h>
-#include <asm/arch/tc.h>
-#include <asm/arch/common.h>
-#include <asm/arch/mcbsp.h>
-#include <asm/arch/omap-alsa.h>
+#include <mach/usb.h>
+#include <mach/mux.h>
+#include <mach/tc.h>
+#include <mach/common.h>
+#include <mach/mcbsp.h>
+#include <mach/omap-alsa.h>
 
 static struct mtd_partition osk_partitions[] = {
 	/* bootloader (U-Boot, etc) in first sector */
@@ -288,7 +288,7 @@ static void __init osk_init_cf(void)
 		return;
 	}
 	/* the CF I/O IRQ is really active-low */
-	set_irq_type(OMAP_GPIO_IRQ(62), IRQT_FALLING);
+	set_irq_type(OMAP_GPIO_IRQ(62), IRQ_TYPE_EDGE_FALLING);
 }
 
 static void __init osk_init_irq(void)
@@ -340,7 +340,7 @@ static struct omap_board_config_kernel osk_config[] __initdata = {
 #include <linux/spi/spi.h>
 #include <linux/spi/ads7846.h>
 
-#include <asm/arch/keypad.h>
+#include <mach/keypad.h>
 
 static const int osk_keymap[] = {
 	/* KEY(col, row, code) */
@@ -483,7 +483,7 @@ static void __init osk_mistral_init(void)
 	omap_cfg_reg(P20_1610_GPIO4);	/* PENIRQ */
 	gpio_request(4, "ts_int");
 	gpio_direction_input(4);
-	set_irq_type(OMAP_GPIO_IRQ(4), IRQT_FALLING);
+	set_irq_type(OMAP_GPIO_IRQ(4), IRQ_TYPE_EDGE_FALLING);
 
 	spi_register_board_info(mistral_boardinfo,
 			ARRAY_SIZE(mistral_boardinfo));
@@ -494,7 +494,7 @@ static void __init osk_mistral_init(void)
 		int ret = 0;
 
 		gpio_direction_input(OMAP_MPUIO(2));
-		set_irq_type(OMAP_GPIO_IRQ(OMAP_MPUIO(2)), IRQT_RISING);
+		set_irq_type(OMAP_GPIO_IRQ(OMAP_MPUIO(2)), IRQ_TYPE_EDGE_RISING);
 #ifdef	CONFIG_PM
 		/* share the IRQ in case someone wants to use the
 		 * button for more than wakeup from system sleep.
diff --git a/arch/arm/mach-omap1/board-palmte.c b/arch/arm/mach-omap1/board-palmte.c
index a4d20127a60e..b58043644a6f 100644
--- a/arch/arm/mach-omap1/board-palmte.c
+++ b/arch/arm/mach-omap1/board-palmte.c
@@ -27,23 +27,23 @@
 #include <linux/interrupt.h>
 #include <linux/apm-emulation.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 #include <asm/mach/flash.h>
 
-#include <asm/arch/gpio.h>
-#include <asm/arch/mux.h>
-#include <asm/arch/usb.h>
-#include <asm/arch/tc.h>
-#include <asm/arch/dma.h>
-#include <asm/arch/board.h>
-#include <asm/arch/irda.h>
-#include <asm/arch/keypad.h>
-#include <asm/arch/common.h>
-#include <asm/arch/mcbsp.h>
-#include <asm/arch/omap-alsa.h>
+#include <mach/gpio.h>
+#include <mach/mux.h>
+#include <mach/usb.h>
+#include <mach/tc.h>
+#include <mach/dma.h>
+#include <mach/board.h>
+#include <mach/irda.h>
+#include <mach/keypad.h>
+#include <mach/common.h>
+#include <mach/mcbsp.h>
+#include <mach/omap-alsa.h>
 
 static void __init omap_palmte_init_irq(void)
 {
diff --git a/arch/arm/mach-omap1/board-palmtt.c b/arch/arm/mach-omap1/board-palmtt.c
index 2a033689f9f4..40f9860a09df 100644
--- a/arch/arm/mach-omap1/board-palmtt.c
+++ b/arch/arm/mach-omap1/board-palmtt.c
@@ -23,24 +23,24 @@
 #include <linux/mtd/partitions.h>
 #include <linux/leds.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 #include <asm/mach/flash.h>
 
-#include <asm/arch/led.h>
-#include <asm/arch/mcbsp.h>
-#include <asm/arch/gpio.h>
-#include <asm/arch/mux.h>
-#include <asm/arch/usb.h>
-#include <asm/arch/dma.h>
-#include <asm/arch/tc.h>
-#include <asm/arch/board.h>
-#include <asm/arch/irda.h>
-#include <asm/arch/keypad.h>
-#include <asm/arch/common.h>
-#include <asm/arch/omap-alsa.h>
+#include <mach/led.h>
+#include <mach/mcbsp.h>
+#include <mach/gpio.h>
+#include <mach/mux.h>
+#include <mach/usb.h>
+#include <mach/dma.h>
+#include <mach/tc.h>
+#include <mach/board.h>
+#include <mach/irda.h>
+#include <mach/keypad.h>
+#include <mach/common.h>
+#include <mach/omap-alsa.h>
 
 #include <linux/spi/spi.h>
 #include <linux/spi/ads7846.h>
diff --git a/arch/arm/mach-omap1/board-palmz71.c b/arch/arm/mach-omap1/board-palmz71.c
index e020c2774606..e719294250b1 100644
--- a/arch/arm/mach-omap1/board-palmz71.c
+++ b/arch/arm/mach-omap1/board-palmz71.c
@@ -26,23 +26,23 @@
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/partitions.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 #include <asm/mach/flash.h>
 
-#include <asm/arch/mcbsp.h>
-#include <asm/arch/gpio.h>
-#include <asm/arch/mux.h>
-#include <asm/arch/usb.h>
-#include <asm/arch/dma.h>
-#include <asm/arch/tc.h>
-#include <asm/arch/board.h>
-#include <asm/arch/irda.h>
-#include <asm/arch/keypad.h>
-#include <asm/arch/common.h>
-#include <asm/arch/omap-alsa.h>
+#include <mach/mcbsp.h>
+#include <mach/gpio.h>
+#include <mach/mux.h>
+#include <mach/usb.h>
+#include <mach/dma.h>
+#include <mach/tc.h>
+#include <mach/board.h>
+#include <mach/irda.h>
+#include <mach/keypad.h>
+#include <mach/common.h>
+#include <mach/omap-alsa.h>
 
 #include <linux/spi/spi.h>
 #include <linux/spi/ads7846.h>
@@ -298,11 +298,11 @@ palmz71_powercable(int irq, void *dev_id)
 	if (omap_get_gpio_datain(PALMZ71_USBDETECT_GPIO)) {
 		printk(KERN_INFO "PM: Power cable connected\n");
 		set_irq_type(OMAP_GPIO_IRQ(PALMZ71_USBDETECT_GPIO),
-				IRQT_FALLING);
+				IRQ_TYPE_EDGE_FALLING);
 	} else {
 		printk(KERN_INFO "PM: Power cable disconnected\n");
 		set_irq_type(OMAP_GPIO_IRQ(PALMZ71_USBDETECT_GPIO),
-				IRQT_RISING);
+				IRQ_TYPE_EDGE_RISING);
 	}
 	return IRQ_HANDLED;
 }
diff --git a/arch/arm/mach-omap1/board-perseus2.c b/arch/arm/mach-omap1/board-perseus2.c
index 94bc0745ab2c..b715917bfdaf 100644
--- a/arch/arm/mach-omap1/board-perseus2.c
+++ b/arch/arm/mach-omap1/board-perseus2.c
@@ -20,20 +20,20 @@
 #include <linux/mtd/partitions.h>
 #include <linux/input.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/flash.h>
 #include <asm/mach/map.h>
 
-#include <asm/arch/tc.h>
-#include <asm/arch/gpio.h>
-#include <asm/arch/mux.h>
-#include <asm/arch/fpga.h>
-#include <asm/arch/nand.h>
-#include <asm/arch/keypad.h>
-#include <asm/arch/common.h>
-#include <asm/arch/board.h>
+#include <mach/tc.h>
+#include <mach/gpio.h>
+#include <mach/mux.h>
+#include <mach/fpga.h>
+#include <mach/nand.h>
+#include <mach/keypad.h>
+#include <mach/common.h>
+#include <mach/board.h>
 
 static int p2_keymap[] = {
 	KEY(0,0,KEY_UP),
diff --git a/arch/arm/mach-omap1/board-sx1-mmc.c b/arch/arm/mach-omap1/board-sx1-mmc.c
index 8c93d47719e8..0be4ebaa2842 100644
--- a/arch/arm/mach-omap1/board-sx1-mmc.c
+++ b/arch/arm/mach-omap1/board-sx1-mmc.c
@@ -12,9 +12,9 @@
  * published by the Free Software Foundation.
  */
 
-#include <asm/arch/hardware.h>
-#include <asm/arch/mmc.h>
-#include <asm/arch/gpio.h>
+#include <mach/hardware.h>
+#include <mach/mmc.h>
+#include <mach/gpio.h>
 
 #ifdef CONFIG_MMC_OMAP
 static int slot_cover_open;
diff --git a/arch/arm/mach-omap1/board-sx1.c b/arch/arm/mach-omap1/board-sx1.c
index e473fa6d4a5f..130bcc6fd082 100644
--- a/arch/arm/mach-omap1/board-sx1.c
+++ b/arch/arm/mach-omap1/board-sx1.c
@@ -26,22 +26,22 @@
 #include <linux/i2c.h>
 #include <linux/errno.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/flash.h>
 #include <asm/mach/map.h>
 
-#include <asm/arch/gpio.h>
-#include <asm/arch/mux.h>
-#include <asm/arch/irda.h>
-#include <asm/arch/usb.h>
-#include <asm/arch/tc.h>
-#include <asm/arch/board.h>
-#include <asm/arch/common.h>
-#include <asm/arch/mcbsp.h>
-#include <asm/arch/omap-alsa.h>
-#include <asm/arch/keypad.h>
+#include <mach/gpio.h>
+#include <mach/mux.h>
+#include <mach/irda.h>
+#include <mach/usb.h>
+#include <mach/tc.h>
+#include <mach/board.h>
+#include <mach/common.h>
+#include <mach/mcbsp.h>
+#include <mach/omap-alsa.h>
+#include <mach/keypad.h>
 
 /* Write to I2C device */
 int sx1_i2c_write_byte(u8 devaddr, u8 regoffset, u8 value)
diff --git a/arch/arm/mach-omap1/board-voiceblue.c b/arch/arm/mach-omap1/board-voiceblue.c
index 5c00b3f39cdd..213b48787102 100644
--- a/arch/arm/mach-omap1/board-voiceblue.c
+++ b/arch/arm/mach-omap1/board-voiceblue.c
@@ -22,17 +22,17 @@
 #include <linux/serial_8250.h>
 #include <linux/serial_reg.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/flash.h>
 #include <asm/mach/map.h>
 
-#include <asm/arch/common.h>
-#include <asm/arch/gpio.h>
-#include <asm/arch/mux.h>
-#include <asm/arch/tc.h>
-#include <asm/arch/usb.h>
+#include <mach/common.h>
+#include <mach/gpio.h>
+#include <mach/mux.h>
+#include <mach/tc.h>
+#include <mach/usb.h>
 
 static struct plat_serial8250_port voiceblue_ports[] = {
 	{
@@ -186,10 +186,10 @@ static void __init voiceblue_init(void)
 	omap_request_gpio(13);
 	omap_request_gpio(14);
 	omap_request_gpio(15);
-	set_irq_type(OMAP_GPIO_IRQ(12), IRQT_RISING);
-	set_irq_type(OMAP_GPIO_IRQ(13), IRQT_RISING);
-	set_irq_type(OMAP_GPIO_IRQ(14), IRQT_RISING);
-	set_irq_type(OMAP_GPIO_IRQ(15), IRQT_RISING);
+	set_irq_type(OMAP_GPIO_IRQ(12), IRQ_TYPE_EDGE_RISING);
+	set_irq_type(OMAP_GPIO_IRQ(13), IRQ_TYPE_EDGE_RISING);
+	set_irq_type(OMAP_GPIO_IRQ(14), IRQ_TYPE_EDGE_RISING);
+	set_irq_type(OMAP_GPIO_IRQ(15), IRQ_TYPE_EDGE_RISING);
 
 	platform_add_devices(voiceblue_devices, ARRAY_SIZE(voiceblue_devices));
 	omap_board_config = voiceblue_config;
diff --git a/arch/arm/mach-omap1/clock.c b/arch/arm/mach-omap1/clock.c
index 4ea2933f887d..5965cf09f8c4 100644
--- a/arch/arm/mach-omap1/clock.c
+++ b/arch/arm/mach-omap1/clock.c
@@ -21,10 +21,10 @@
 #include <asm/io.h>
 #include <asm/mach-types.h>
 
-#include <asm/arch/cpu.h>
-#include <asm/arch/usb.h>
-#include <asm/arch/clock.h>
-#include <asm/arch/sram.h>
+#include <mach/cpu.h>
+#include <mach/usb.h>
+#include <mach/clock.h>
+#include <mach/sram.h>
 
 #include "clock.h"
 
diff --git a/arch/arm/mach-omap1/devices.c b/arch/arm/mach-omap1/devices.c
index da8a3ac47e13..ab708d4c597e 100644
--- a/arch/arm/mach-omap1/devices.c
+++ b/arch/arm/mach-omap1/devices.c
@@ -14,15 +14,14 @@
 #include <linux/init.h>
 #include <linux/platform_device.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
-#include <asm/mach-types.h>
 #include <asm/mach/map.h>
 
-#include <asm/arch/tc.h>
-#include <asm/arch/board.h>
-#include <asm/arch/mux.h>
-#include <asm/arch/gpio.h>
+#include <mach/tc.h>
+#include <mach/board.h>
+#include <mach/mux.h>
+#include <mach/gpio.h>
 
 /*-------------------------------------------------------------------------*/
 
diff --git a/arch/arm/mach-omap1/fpga.c b/arch/arm/mach-omap1/fpga.c
index 0cf62ef5ecb7..4449d86095f6 100644
--- a/arch/arm/mach-omap1/fpga.c
+++ b/arch/arm/mach-omap1/fpga.c
@@ -22,13 +22,13 @@
 #include <linux/device.h>
 #include <linux/errno.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 #include <asm/irq.h>
 #include <asm/mach/irq.h>
 
-#include <asm/arch/fpga.h>
-#include <asm/arch/gpio.h>
+#include <mach/fpga.h>
+#include <mach/gpio.h>
 
 static void fpga_mask_irq(unsigned int irq)
 {
@@ -181,7 +181,7 @@ void omap1510_fpga_init_irq(void)
 	 */
 	omap_request_gpio(13);
 	omap_set_gpio_direction(13, 1);
-	set_irq_type(OMAP_GPIO_IRQ(13), IRQT_RISING);
+	set_irq_type(OMAP_GPIO_IRQ(13), IRQ_TYPE_EDGE_RISING);
 	set_irq_chained_handler(OMAP1510_INT_FPGA, innovator_fpga_IRQ_demux);
 }
 
diff --git a/arch/arm/mach-omap1/io.c b/arch/arm/mach-omap1/io.c
index 81c4e738506c..2b9750b200ce 100644
--- a/arch/arm/mach-omap1/io.c
+++ b/arch/arm/mach-omap1/io.c
@@ -15,8 +15,8 @@
 #include <asm/tlb.h>
 #include <asm/mach/map.h>
 #include <asm/io.h>
-#include <asm/arch/mux.h>
-#include <asm/arch/tc.h>
+#include <mach/mux.h>
+#include <mach/tc.h>
 
 extern int omap1_clk_init(void);
 extern void omap_check_revision(void);
diff --git a/arch/arm/mach-omap1/irq.c b/arch/arm/mach-omap1/irq.c
index 1da9d59a0347..0ec6c1ec4250 100644
--- a/arch/arm/mach-omap1/irq.c
+++ b/arch/arm/mach-omap1/irq.c
@@ -41,11 +41,11 @@
 #include <linux/sched.h>
 #include <linux/interrupt.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/irq.h>
 #include <asm/mach/irq.h>
-#include <asm/arch/gpio.h>
-#include <asm/arch/cpu.h>
+#include <mach/gpio.h>
+#include <mach/cpu.h>
 
 #include <asm/io.h>
 
diff --git a/arch/arm/mach-omap1/leds-h2p2-debug.c b/arch/arm/mach-omap1/leds-h2p2-debug.c
index 8976fbb21f7c..610f51f18741 100644
--- a/arch/arm/mach-omap1/leds-h2p2-debug.c
+++ b/arch/arm/mach-omap1/leds-h2p2-debug.c
@@ -14,13 +14,13 @@
 #include <linux/sched.h>
 
 #include <asm/io.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/leds.h>
 #include <asm/system.h>
 #include <asm/mach-types.h>
 
-#include <asm/arch/fpga.h>
-#include <asm/arch/gpio.h>
+#include <mach/fpga.h>
+#include <mach/gpio.h>
 
 #include "leds.h"
 
diff --git a/arch/arm/mach-omap1/leds-innovator.c b/arch/arm/mach-omap1/leds-innovator.c
index e7835d6f53a0..9b99c2894623 100644
--- a/arch/arm/mach-omap1/leds-innovator.c
+++ b/arch/arm/mach-omap1/leds-innovator.c
@@ -3,7 +3,7 @@
  */
 #include <linux/init.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/leds.h>
 #include <asm/system.h>
 
diff --git a/arch/arm/mach-omap1/leds-osk.c b/arch/arm/mach-omap1/leds-osk.c
index 754383dde807..98e789622dfd 100644
--- a/arch/arm/mach-omap1/leds-osk.c
+++ b/arch/arm/mach-omap1/leds-osk.c
@@ -5,11 +5,11 @@
  */
 #include <linux/init.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/leds.h>
 #include <asm/system.h>
 
-#include <asm/arch/gpio.h>
+#include <mach/gpio.h>
 
 #include "leds.h"
 
diff --git a/arch/arm/mach-omap1/leds.c b/arch/arm/mach-omap1/leds.c
index 3f9dcac4fd41..6cdad93c4a00 100644
--- a/arch/arm/mach-omap1/leds.c
+++ b/arch/arm/mach-omap1/leds.c
@@ -9,8 +9,8 @@
 #include <asm/leds.h>
 #include <asm/mach-types.h>
 
-#include <asm/arch/gpio.h>
-#include <asm/arch/mux.h>
+#include <mach/gpio.h>
+#include <mach/mux.h>
 
 #include "leds.h"
 
diff --git a/arch/arm/mach-omap1/mailbox.c b/arch/arm/mach-omap1/mailbox.c
index bad1e7152d8e..af44eab1ed24 100644
--- a/arch/arm/mach-omap1/mailbox.c
+++ b/arch/arm/mach-omap1/mailbox.c
@@ -13,8 +13,8 @@
 #include <linux/resource.h>
 #include <linux/interrupt.h>
 #include <linux/platform_device.h>
-#include <asm/arch/mailbox.h>
-#include <asm/arch/irqs.h>
+#include <mach/mailbox.h>
+#include <mach/irqs.h>
 #include <asm/io.h>
 
 #define MAILBOX_ARM2DSP1		0x00
diff --git a/arch/arm/mach-omap1/mcbsp.c b/arch/arm/mach-omap1/mcbsp.c
index 2d2c2522b048..826010d5d014 100644
--- a/arch/arm/mach-omap1/mcbsp.c
+++ b/arch/arm/mach-omap1/mcbsp.c
@@ -17,11 +17,11 @@
 #include <linux/io.h>
 #include <linux/platform_device.h>
 
-#include <asm/arch/dma.h>
-#include <asm/arch/mux.h>
-#include <asm/arch/cpu.h>
-#include <asm/arch/mcbsp.h>
-#include <asm/arch/dsp_common.h>
+#include <mach/dma.h>
+#include <mach/mux.h>
+#include <mach/cpu.h>
+#include <mach/mcbsp.h>
+#include <mach/dsp_common.h>
 
 #define DPS_RSTCT2_PER_EN	(1 << 0)
 #define DSP_RSTCT2_WD_PER_EN	(1 << 1)
diff --git a/arch/arm/mach-omap1/mux.c b/arch/arm/mach-omap1/mux.c
index e207bf7cb853..898516e362e7 100644
--- a/arch/arm/mach-omap1/mux.c
+++ b/arch/arm/mach-omap1/mux.c
@@ -28,7 +28,7 @@
 #include <asm/io.h>
 #include <linux/spinlock.h>
 
-#include <asm/arch/mux.h>
+#include <mach/mux.h>
 
 #ifdef CONFIG_OMAP_MUX
 
diff --git a/arch/arm/mach-omap1/pm.c b/arch/arm/mach-omap1/pm.c
index 742f79e73bd7..63c4ea18b1ca 100644
--- a/arch/arm/mach-omap1/pm.c
+++ b/arch/arm/mach-omap1/pm.c
@@ -47,17 +47,16 @@
 #include <asm/atomic.h>
 #include <asm/mach/time.h>
 #include <asm/mach/irq.h>
-#include <asm/mach-types.h>
-
-#include <asm/arch/cpu.h>
-#include <asm/arch/irqs.h>
-#include <asm/arch/clock.h>
-#include <asm/arch/sram.h>
-#include <asm/arch/tc.h>
-#include <asm/arch/pm.h>
-#include <asm/arch/mux.h>
-#include <asm/arch/dma.h>
-#include <asm/arch/dmtimer.h>
+
+#include <mach/cpu.h>
+#include <mach/irqs.h>
+#include <mach/clock.h>
+#include <mach/sram.h>
+#include <mach/tc.h>
+#include <mach/pm.h>
+#include <mach/mux.h>
+#include <mach/dma.h>
+#include <mach/dmtimer.h>
 
 static unsigned int arm_sleep_save[ARM_SLEEP_SAVE_SIZE];
 static unsigned short dsp_sleep_save[DSP_SLEEP_SAVE_SIZE];
diff --git a/arch/arm/mach-omap1/serial.c b/arch/arm/mach-omap1/serial.c
index 10a4fe88b2fd..0e25a996bb4c 100644
--- a/arch/arm/mach-omap1/serial.c
+++ b/arch/arm/mach-omap1/serial.c
@@ -22,12 +22,12 @@
 #include <asm/io.h>
 #include <asm/mach-types.h>
 
-#include <asm/arch/board.h>
-#include <asm/arch/mux.h>
-#include <asm/arch/gpio.h>
-#include <asm/arch/fpga.h>
+#include <mach/board.h>
+#include <mach/mux.h>
+#include <mach/gpio.h>
+#include <mach/fpga.h>
 #ifdef CONFIG_PM
-#include <asm/arch/pm.h>
+#include <mach/pm.h>
 #endif
 
 static struct clk * uart1_ck;
diff --git a/arch/arm/mach-omap1/sleep.S b/arch/arm/mach-omap1/sleep.S
index 68f5b39030b6..f3eac932092d 100644
--- a/arch/arm/mach-omap1/sleep.S
+++ b/arch/arm/mach-omap1/sleep.S
@@ -34,8 +34,8 @@
 
 #include <linux/linkage.h>
 #include <asm/assembler.h>
-#include <asm/arch/io.h>
-#include <asm/arch/pm.h>
+#include <mach/io.h>
+#include <mach/pm.h>
 
 		.text
 
diff --git a/arch/arm/mach-omap1/sram.S b/arch/arm/mach-omap1/sram.S
index 126d252062d7..261cdc48228b 100644
--- a/arch/arm/mach-omap1/sram.S
+++ b/arch/arm/mach-omap1/sram.S
@@ -10,8 +10,8 @@
 
 #include <linux/linkage.h>
 #include <asm/assembler.h>
-#include <asm/arch/io.h>
-#include <asm/hardware.h>
+#include <mach/io.h>
+#include <mach/hardware.h>
 
 	.text
 
diff --git a/arch/arm/mach-omap1/time.c b/arch/arm/mach-omap1/time.c
index 5d2b270935a2..e54708595ecf 100644
--- a/arch/arm/mach-omap1/time.c
+++ b/arch/arm/mach-omap1/time.c
@@ -45,7 +45,7 @@
 #include <linux/clockchips.h>
 
 #include <asm/system.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 #include <asm/leds.h>
 #include <asm/irq.h>
diff --git a/arch/arm/mach-omap1/timer32k.c b/arch/arm/mach-omap1/timer32k.c
index fbbdb806c95a..e67760189d14 100644
--- a/arch/arm/mach-omap1/timer32k.c
+++ b/arch/arm/mach-omap1/timer32k.c
@@ -46,13 +46,13 @@
 #include <linux/clockchips.h>
 
 #include <asm/system.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 #include <asm/leds.h>
 #include <asm/irq.h>
 #include <asm/mach/irq.h>
 #include <asm/mach/time.h>
-#include <asm/arch/dmtimer.h>
+#include <mach/dmtimer.h>
 
 struct sys_timer omap_timer;
 
diff --git a/arch/arm/mach-omap2/board-2430sdp.c b/arch/arm/mach-omap2/board-2430sdp.c
index 1682eb77c46d..b72ca13b3acb 100644
--- a/arch/arm/mach-omap2/board-2430sdp.c
+++ b/arch/arm/mach-omap2/board-2430sdp.c
@@ -22,17 +22,17 @@
 #include <linux/err.h>
 #include <linux/clk.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 #include <asm/mach/flash.h>
 
-#include <asm/arch/gpio.h>
-#include <asm/arch/mux.h>
-#include <asm/arch/board.h>
-#include <asm/arch/common.h>
-#include <asm/arch/gpmc.h>
+#include <mach/gpio.h>
+#include <mach/mux.h>
+#include <mach/board.h>
+#include <mach/common.h>
+#include <mach/gpmc.h>
 
 #include <asm/io.h>
 
@@ -103,7 +103,7 @@ static struct resource sdp2430_smc91x_resources[] = {
 	[1] = {
 		.start	= OMAP_GPIO_IRQ(OMAP24XX_ETHR_GPIO_IRQ),
 		.end	= OMAP_GPIO_IRQ(OMAP24XX_ETHR_GPIO_IRQ),
-		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
+		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL,
 	},
 };
 
diff --git a/arch/arm/mach-omap2/board-apollon.c b/arch/arm/mach-omap2/board-apollon.c
index 620fa0f120ee..989ad152d7f8 100644
--- a/arch/arm/mach-omap2/board-apollon.c
+++ b/arch/arm/mach-omap2/board-apollon.c
@@ -29,19 +29,19 @@
 #include <linux/err.h>
 #include <linux/clk.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/flash.h>
 
-#include <asm/arch/gpio.h>
-#include <asm/arch/led.h>
-#include <asm/arch/mux.h>
-#include <asm/arch/usb.h>
-#include <asm/arch/board.h>
-#include <asm/arch/common.h>
-#include <asm/arch/gpmc.h>
-#include <asm/arch/control.h>
+#include <mach/gpio.h>
+#include <mach/led.h>
+#include <mach/mux.h>
+#include <mach/usb.h>
+#include <mach/board.h>
+#include <mach/common.h>
+#include <mach/gpmc.h>
+#include <mach/control.h>
 
 /* LED & Switch macros */
 #define LED0_GPIO13		13
@@ -337,17 +337,17 @@ static void __init apollon_sw_init(void)
 	omap_request_gpio(SW_DOWN_GPIO58);
 	omap_set_gpio_direction(SW_DOWN_GPIO58, 1);
 
-	set_irq_type(OMAP_GPIO_IRQ(SW_ENTER_GPIO16), IRQT_RISING);
+	set_irq_type(OMAP_GPIO_IRQ(SW_ENTER_GPIO16), IRQ_TYPE_EDGE_RISING);
 	if (request_irq(OMAP_GPIO_IRQ(SW_ENTER_GPIO16), &apollon_sw_interrupt,
 				IRQF_SHARED, "enter sw",
 				&apollon_sw_interrupt))
 		return;
-	set_irq_type(OMAP_GPIO_IRQ(SW_UP_GPIO17), IRQT_RISING);
+	set_irq_type(OMAP_GPIO_IRQ(SW_UP_GPIO17), IRQ_TYPE_EDGE_RISING);
 	if (request_irq(OMAP_GPIO_IRQ(SW_UP_GPIO17), &apollon_sw_interrupt,
 				IRQF_SHARED, "up sw",
 				&apollon_sw_interrupt))
 		return;
-	set_irq_type(OMAP_GPIO_IRQ(SW_DOWN_GPIO58), IRQT_RISING);
+	set_irq_type(OMAP_GPIO_IRQ(SW_DOWN_GPIO58), IRQ_TYPE_EDGE_RISING);
 	if (request_irq(OMAP_GPIO_IRQ(SW_DOWN_GPIO58), &apollon_sw_interrupt,
 				IRQF_SHARED, "down sw",
 				&apollon_sw_interrupt))
diff --git a/arch/arm/mach-omap2/board-generic.c b/arch/arm/mach-omap2/board-generic.c
index df8be081e159..9ba097868e72 100644
--- a/arch/arm/mach-omap2/board-generic.c
+++ b/arch/arm/mach-omap2/board-generic.c
@@ -20,16 +20,16 @@
 #include <linux/init.h>
 #include <linux/device.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 
-#include <asm/arch/gpio.h>
-#include <asm/arch/mux.h>
-#include <asm/arch/usb.h>
-#include <asm/arch/board.h>
-#include <asm/arch/common.h>
+#include <mach/gpio.h>
+#include <mach/mux.h>
+#include <mach/usb.h>
+#include <mach/board.h>
+#include <mach/common.h>
 
 static void __init omap_generic_init_irq(void)
 {
diff --git a/arch/arm/mach-omap2/board-h4.c b/arch/arm/mach-omap2/board-h4.c
index 0d28f6897c8e..9e2624ca70a2 100644
--- a/arch/arm/mach-omap2/board-h4.c
+++ b/arch/arm/mach-omap2/board-h4.c
@@ -22,24 +22,24 @@
 #include <linux/err.h>
 #include <linux/clk.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 #include <asm/mach/flash.h>
 
-#include <asm/arch/control.h>
-#include <asm/arch/gpio.h>
-#include <asm/arch/gpioexpander.h>
-#include <asm/arch/mux.h>
-#include <asm/arch/usb.h>
-#include <asm/arch/irda.h>
-#include <asm/arch/board.h>
-#include <asm/arch/common.h>
-#include <asm/arch/keypad.h>
-#include <asm/arch/menelaus.h>
-#include <asm/arch/dma.h>
-#include <asm/arch/gpmc.h>
+#include <mach/control.h>
+#include <mach/gpio.h>
+#include <mach/gpioexpander.h>
+#include <mach/mux.h>
+#include <mach/usb.h>
+#include <mach/irda.h>
+#include <mach/board.h>
+#include <mach/common.h>
+#include <mach/keypad.h>
+#include <mach/menelaus.h>
+#include <mach/dma.h>
+#include <mach/gpmc.h>
 
 #include <asm/io.h>
 
diff --git a/arch/arm/mach-omap2/clock.c b/arch/arm/mach-omap2/clock.c
index 15675bce8012..1d891e4a6933 100644
--- a/arch/arm/mach-omap2/clock.c
+++ b/arch/arm/mach-omap2/clock.c
@@ -25,9 +25,9 @@
 
 #include <asm/io.h>
 
-#include <asm/arch/clock.h>
-#include <asm/arch/sram.h>
-#include <asm/arch/cpu.h>
+#include <mach/clock.h>
+#include <mach/sram.h>
+#include <mach/cpu.h>
 #include <asm/div64.h>
 
 #include "memory.h"
diff --git a/arch/arm/mach-omap2/clock.h b/arch/arm/mach-omap2/clock.h
index 3cd37cb57c5a..626e5fa93b6a 100644
--- a/arch/arm/mach-omap2/clock.h
+++ b/arch/arm/mach-omap2/clock.h
@@ -16,7 +16,7 @@
 #ifndef __ARCH_ARM_MACH_OMAP2_CLOCK_H
 #define __ARCH_ARM_MACH_OMAP2_CLOCK_H
 
-#include <asm/arch/clock.h>
+#include <mach/clock.h>
 
 /* The maximum error between a target DPLL rate and the rounded rate in Hz */
 #define DEFAULT_DPLL_RATE_TOLERANCE	50000
diff --git a/arch/arm/mach-omap2/clock24xx.c b/arch/arm/mach-omap2/clock24xx.c
index aa567876651d..295e671e9cfd 100644
--- a/arch/arm/mach-omap2/clock24xx.c
+++ b/arch/arm/mach-omap2/clock24xx.c
@@ -28,8 +28,8 @@
 #include <linux/io.h>
 #include <linux/cpufreq.h>
 
-#include <asm/arch/clock.h>
-#include <asm/arch/sram.h>
+#include <mach/clock.h>
+#include <mach/sram.h>
 #include <asm/div64.h>
 #include <asm/bitops.h>
 
diff --git a/arch/arm/mach-omap2/clock34xx.c b/arch/arm/mach-omap2/clock34xx.c
index 4263099b1ad3..3ff74952f835 100644
--- a/arch/arm/mach-omap2/clock34xx.c
+++ b/arch/arm/mach-omap2/clock34xx.c
@@ -26,8 +26,8 @@
 #include <linux/io.h>
 #include <linux/limits.h>
 
-#include <asm/arch/clock.h>
-#include <asm/arch/sram.h>
+#include <mach/clock.h>
+#include <mach/sram.h>
 #include <asm/div64.h>
 #include <asm/bitops.h>
 
diff --git a/arch/arm/mach-omap2/clock34xx.h b/arch/arm/mach-omap2/clock34xx.h
index 05757eb032bc..ec664457a11a 100644
--- a/arch/arm/mach-omap2/clock34xx.h
+++ b/arch/arm/mach-omap2/clock34xx.h
@@ -19,7 +19,7 @@
 #ifndef __ARCH_ARM_MACH_OMAP2_CLOCK34XX_H
 #define __ARCH_ARM_MACH_OMAP2_CLOCK34XX_H
 
-#include <asm/arch/control.h>
+#include <mach/control.h>
 
 #include "clock.h"
 #include "cm.h"
diff --git a/arch/arm/mach-omap2/control.c b/arch/arm/mach-omap2/control.c
index 51f70300996f..5f3aad977842 100644
--- a/arch/arm/mach-omap2/control.c
+++ b/arch/arm/mach-omap2/control.c
@@ -15,8 +15,8 @@
 #include <linux/kernel.h>
 #include <linux/io.h>
 
-#include <asm/arch/common.h>
-#include <asm/arch/control.h>
+#include <mach/common.h>
+#include <mach/control.h>
 
 static void __iomem *omap2_ctrl_base;
 
diff --git a/arch/arm/mach-omap2/devices.c b/arch/arm/mach-omap2/devices.c
index b603bc5f8e5b..7a7f02559075 100644
--- a/arch/arm/mach-omap2/devices.c
+++ b/arch/arm/mach-omap2/devices.c
@@ -14,15 +14,15 @@
 #include <linux/init.h>
 #include <linux/platform_device.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 #include <asm/mach-types.h>
 #include <asm/mach/map.h>
 
-#include <asm/arch/tc.h>
-#include <asm/arch/board.h>
-#include <asm/arch/mux.h>
-#include <asm/arch/gpio.h>
+#include <mach/tc.h>
+#include <mach/board.h>
+#include <mach/mux.h>
+#include <mach/gpio.h>
 
 #if	defined(CONFIG_I2C_OMAP) || defined(CONFIG_I2C_OMAP_MODULE)
 
@@ -142,7 +142,7 @@ static inline void omap_init_sti(void) {}
 
 #if defined(CONFIG_SPI_OMAP24XX)
 
-#include <asm/arch/mcspi.h>
+#include <mach/mcspi.h>
 
 #define OMAP2_MCSPI1_BASE		0x48098000
 #define OMAP2_MCSPI2_BASE		0x4809a000
diff --git a/arch/arm/mach-omap2/gpmc.c b/arch/arm/mach-omap2/gpmc.c
index dbf68dc50ae2..f51d69bc457d 100644
--- a/arch/arm/mach-omap2/gpmc.c
+++ b/arch/arm/mach-omap2/gpmc.c
@@ -18,7 +18,7 @@
 
 #include <asm/io.h>
 #include <asm/mach-types.h>
-#include <asm/arch/gpmc.h>
+#include <mach/gpmc.h>
 
 #undef DEBUG
 
diff --git a/arch/arm/mach-omap2/id.c b/arch/arm/mach-omap2/id.c
index dff4b16cead6..a5d4526ac4d6 100644
--- a/arch/arm/mach-omap2/id.c
+++ b/arch/arm/mach-omap2/id.c
@@ -17,8 +17,8 @@
 
 #include <asm/io.h>
 
-#include <asm/arch/control.h>
-#include <asm/arch/cpu.h>
+#include <mach/control.h>
+#include <mach/cpu.h>
 
 #if defined(CONFIG_ARCH_OMAP2420)
 #define TAP_BASE	io_p2v(0x48014000)
diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c
index 69c8174f3aac..987351f07d7b 100644
--- a/arch/arm/mach-omap2/io.c
+++ b/arch/arm/mach-omap2/io.c
@@ -21,8 +21,8 @@
 
 #include <asm/mach/map.h>
 
-#include <asm/arch/mux.h>
-#include <asm/arch/omapfb.h>
+#include <mach/mux.h>
+#include <mach/omapfb.h>
 
 extern void omap_sram_init(void);
 extern int omap2_clk_init(void);
diff --git a/arch/arm/mach-omap2/irq.c b/arch/arm/mach-omap2/irq.c
index f064f725e724..9ef15b31d8fc 100644
--- a/arch/arm/mach-omap2/irq.c
+++ b/arch/arm/mach-omap2/irq.c
@@ -13,7 +13,7 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/interrupt.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/mach/irq.h>
 #include <asm/irq.h>
 #include <asm/io.h>
diff --git a/arch/arm/mach-omap2/mailbox.c b/arch/arm/mach-omap2/mailbox.c
index 4799561c5a9e..a480b96948e4 100644
--- a/arch/arm/mach-omap2/mailbox.c
+++ b/arch/arm/mach-omap2/mailbox.c
@@ -14,8 +14,8 @@
 #include <linux/clk.h>
 #include <linux/err.h>
 #include <linux/platform_device.h>
-#include <asm/arch/mailbox.h>
-#include <asm/arch/irqs.h>
+#include <mach/mailbox.h>
+#include <mach/irqs.h>
 #include <asm/io.h>
 
 #define MAILBOX_REVISION		0x00
diff --git a/arch/arm/mach-omap2/mcbsp.c b/arch/arm/mach-omap2/mcbsp.c
index 17cf199d1130..27eb6e3ca926 100644
--- a/arch/arm/mach-omap2/mcbsp.c
+++ b/arch/arm/mach-omap2/mcbsp.c
@@ -17,10 +17,10 @@
 #include <linux/io.h>
 #include <linux/platform_device.h>
 
-#include <asm/arch/dma.h>
-#include <asm/arch/mux.h>
-#include <asm/arch/cpu.h>
-#include <asm/arch/mcbsp.h>
+#include <mach/dma.h>
+#include <mach/mux.h>
+#include <mach/cpu.h>
+#include <mach/mcbsp.h>
 
 struct mcbsp_internal_clk {
 	struct clk clk;
diff --git a/arch/arm/mach-omap2/memory.c b/arch/arm/mach-omap2/memory.c
index 73cadb2c75cf..6b49cc9cbdcb 100644
--- a/arch/arm/mach-omap2/memory.c
+++ b/arch/arm/mach-omap2/memory.c
@@ -24,9 +24,9 @@
 
 #include <asm/io.h>
 
-#include <asm/arch/common.h>
-#include <asm/arch/clock.h>
-#include <asm/arch/sram.h>
+#include <mach/common.h>
+#include <mach/clock.h>
+#include <mach/sram.h>
 
 #include "prm.h"
 
diff --git a/arch/arm/mach-omap2/mux.c b/arch/arm/mach-omap2/mux.c
index 8f98b20f30a1..443d07fef7f3 100644
--- a/arch/arm/mach-omap2/mux.c
+++ b/arch/arm/mach-omap2/mux.c
@@ -29,8 +29,8 @@
 #include <asm/io.h>
 #include <linux/spinlock.h>
 
-#include <asm/arch/control.h>
-#include <asm/arch/mux.h>
+#include <mach/control.h>
+#include <mach/mux.h>
 
 #ifdef CONFIG_OMAP_MUX
 
diff --git a/arch/arm/mach-omap2/pm.c b/arch/arm/mach-omap2/pm.c
index d6c9de82ca0c..8671e1079ab5 100644
--- a/arch/arm/mach-omap2/pm.c
+++ b/arch/arm/mach-omap2/pm.c
@@ -30,12 +30,11 @@
 #include <asm/atomic.h>
 #include <asm/mach/time.h>
 #include <asm/mach/irq.h>
-#include <asm/mach-types.h>
 
-#include <asm/arch/irqs.h>
-#include <asm/arch/clock.h>
-#include <asm/arch/sram.h>
-#include <asm/arch/pm.h>
+#include <mach/irqs.h>
+#include <mach/clock.h>
+#include <mach/sram.h>
+#include <mach/pm.h>
 
 static struct clk *vclk;
 static void (*omap2_sram_idle)(void);
diff --git a/arch/arm/mach-omap2/prcm.c b/arch/arm/mach-omap2/prcm.c
index fd92a80f38f2..f945156d5585 100644
--- a/arch/arm/mach-omap2/prcm.c
+++ b/arch/arm/mach-omap2/prcm.c
@@ -18,8 +18,8 @@
 #include <linux/clk.h>
 #include <linux/io.h>
 
-#include <asm/arch/common.h>
-#include <asm/arch/prcm.h>
+#include <mach/common.h>
+#include <mach/prcm.h>
 
 #include "clock.h"
 #include "prm.h"
diff --git a/arch/arm/mach-omap2/sdrc.h b/arch/arm/mach-omap2/sdrc.h
index 1b1fe4f6e030..1a8bbd094066 100644
--- a/arch/arm/mach-omap2/sdrc.h
+++ b/arch/arm/mach-omap2/sdrc.h
@@ -15,7 +15,7 @@
  */
 #undef DEBUG
 
-#include <asm/arch/sdrc.h>
+#include <mach/sdrc.h>
 
 #ifndef __ASSEMBLER__
 extern void __iomem *omap2_sdrc_base;
diff --git a/arch/arm/mach-omap2/serial.c b/arch/arm/mach-omap2/serial.c
index e9c367fc9f61..adc8a26a8fb0 100644
--- a/arch/arm/mach-omap2/serial.c
+++ b/arch/arm/mach-omap2/serial.c
@@ -20,8 +20,8 @@
 
 #include <asm/io.h>
 
-#include <asm/arch/common.h>
-#include <asm/arch/board.h>
+#include <mach/common.h>
+#include <mach/board.h>
 
 static struct clk * uart1_ick = NULL;
 static struct clk * uart1_fck = NULL;
diff --git a/arch/arm/mach-omap2/sleep.S b/arch/arm/mach-omap2/sleep.S
index 46ccb9b8b583..87a706fd5f82 100644
--- a/arch/arm/mach-omap2/sleep.S
+++ b/arch/arm/mach-omap2/sleep.S
@@ -23,8 +23,8 @@
 
 #include <linux/linkage.h>
 #include <asm/assembler.h>
-#include <asm/arch/io.h>
-#include <asm/arch/pm.h>
+#include <mach/io.h>
+#include <mach/pm.h>
 
 #include "sdrc.h"
 
diff --git a/arch/arm/mach-omap2/sram242x.S b/arch/arm/mach-omap2/sram242x.S
index 4c274510f3e9..af4bd3490227 100644
--- a/arch/arm/mach-omap2/sram242x.S
+++ b/arch/arm/mach-omap2/sram242x.S
@@ -24,8 +24,8 @@
  */
 #include <linux/linkage.h>
 #include <asm/assembler.h>
-#include <asm/arch/io.h>
-#include <asm/hardware.h>
+#include <mach/io.h>
+#include <mach/hardware.h>
 
 #include "prm.h"
 #include "cm.h"
diff --git a/arch/arm/mach-omap2/sram243x.S b/arch/arm/mach-omap2/sram243x.S
index a3fa48dc08cd..84363e269e8c 100644
--- a/arch/arm/mach-omap2/sram243x.S
+++ b/arch/arm/mach-omap2/sram243x.S
@@ -24,8 +24,8 @@
  */
 #include <linux/linkage.h>
 #include <asm/assembler.h>
-#include <asm/arch/io.h>
-#include <asm/hardware.h>
+#include <mach/io.h>
+#include <mach/hardware.h>
 
 #include "prm.h"
 #include "cm.h"
diff --git a/arch/arm/mach-omap2/timer-gp.c b/arch/arm/mach-omap2/timer-gp.c
index 557603f99313..589393bedade 100644
--- a/arch/arm/mach-omap2/timer-gp.c
+++ b/arch/arm/mach-omap2/timer-gp.c
@@ -34,7 +34,7 @@
 #include <linux/clockchips.h>
 
 #include <asm/mach/time.h>
-#include <asm/arch/dmtimer.h>
+#include <mach/dmtimer.h>
 
 static struct omap_dm_timer *gptimer;
 static struct clock_event_device clockevent_gpt;
diff --git a/arch/arm/mach-omap2/usb-tusb6010.c b/arch/arm/mach-omap2/usb-tusb6010.c
index 80bb42eb5082..10ef464d6be7 100644
--- a/arch/arm/mach-omap2/usb-tusb6010.c
+++ b/arch/arm/mach-omap2/usb-tusb6010.c
@@ -15,9 +15,9 @@
 
 #include <linux/usb/musb.h>
 
-#include <asm/arch/gpmc.h>
-#include <asm/arch/gpio.h>
-#include <asm/arch/mux.h>
+#include <mach/gpmc.h>
+#include <mach/gpio.h>
+#include <mach/mux.h>
 
 
 static u8		async_cs, sync_cs;
@@ -317,7 +317,6 @@ tusb6010_setup_interface(struct musb_hdrc_platform_data *data,
 		printk(error, 6, status);
 		return -ENODEV;
 	}
-	data->multipoint = 1;
 	tusb_device.dev.platform_data = data;
 
 	/* REVISIT let the driver know what DMA channels work */
diff --git a/arch/arm/mach-orion5x/addr-map.c b/arch/arm/mach-orion5x/addr-map.c
index 6f0dbda6c44c..bea37972120a 100644
--- a/arch/arm/mach-orion5x/addr-map.c
+++ b/arch/arm/mach-orion5x/addr-map.c
@@ -13,7 +13,7 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/mbus.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 #include "common.h"
 
diff --git a/arch/arm/mach-orion5x/common.c b/arch/arm/mach-orion5x/common.c
index faf4e3211918..7b11e552bc5a 100644
--- a/arch/arm/mach-orion5x/common.c
+++ b/arch/arm/mach-orion5x/common.c
@@ -24,11 +24,12 @@
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 #include <asm/mach/time.h>
-#include <asm/arch/hardware.h>
-#include <asm/arch/orion5x.h>
-#include <asm/plat-orion/ehci-orion.h>
-#include <asm/plat-orion/orion_nand.h>
-#include <asm/plat-orion/time.h>
+#include <mach/hardware.h>
+#include <mach/orion5x.h>
+#include <plat/ehci-orion.h>
+#include <plat/mv_xor.h>
+#include <plat/orion_nand.h>
+#include <plat/time.h>
 #include "common.h"
 
 /*****************************************************************************
@@ -355,6 +356,103 @@ void __init orion5x_uart1_init(void)
 
 
 /*****************************************************************************
+ * XOR engine
+ ****************************************************************************/
+static struct resource orion5x_xor_shared_resources[] = {
+	{
+		.name	= "xor low",
+		.start	= ORION5X_XOR_PHYS_BASE,
+		.end	= ORION5X_XOR_PHYS_BASE + 0xff,
+		.flags	= IORESOURCE_MEM,
+	}, {
+		.name	= "xor high",
+		.start	= ORION5X_XOR_PHYS_BASE + 0x200,
+		.end	= ORION5X_XOR_PHYS_BASE + 0x2ff,
+		.flags	= IORESOURCE_MEM,
+	},
+};
+
+static struct platform_device orion5x_xor_shared = {
+	.name		= MV_XOR_SHARED_NAME,
+	.id		= 0,
+	.num_resources	= ARRAY_SIZE(orion5x_xor_shared_resources),
+	.resource	= orion5x_xor_shared_resources,
+};
+
+static u64 orion5x_xor_dmamask = DMA_32BIT_MASK;
+
+static struct resource orion5x_xor0_resources[] = {
+	[0] = {
+		.start	= IRQ_ORION5X_XOR0,
+		.end	= IRQ_ORION5X_XOR0,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct mv_xor_platform_data orion5x_xor0_data = {
+	.shared		= &orion5x_xor_shared,
+	.hw_id		= 0,
+	.pool_size	= PAGE_SIZE,
+};
+
+static struct platform_device orion5x_xor0_channel = {
+	.name		= MV_XOR_NAME,
+	.id		= 0,
+	.num_resources	= ARRAY_SIZE(orion5x_xor0_resources),
+	.resource	= orion5x_xor0_resources,
+	.dev		= {
+		.dma_mask		= &orion5x_xor_dmamask,
+		.coherent_dma_mask	= DMA_64BIT_MASK,
+		.platform_data		= (void *)&orion5x_xor0_data,
+	},
+};
+
+static struct resource orion5x_xor1_resources[] = {
+	[0] = {
+		.start	= IRQ_ORION5X_XOR1,
+		.end	= IRQ_ORION5X_XOR1,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct mv_xor_platform_data orion5x_xor1_data = {
+	.shared		= &orion5x_xor_shared,
+	.hw_id		= 1,
+	.pool_size	= PAGE_SIZE,
+};
+
+static struct platform_device orion5x_xor1_channel = {
+	.name		= MV_XOR_NAME,
+	.id		= 1,
+	.num_resources	= ARRAY_SIZE(orion5x_xor1_resources),
+	.resource	= orion5x_xor1_resources,
+	.dev		= {
+		.dma_mask		= &orion5x_xor_dmamask,
+		.coherent_dma_mask	= DMA_64BIT_MASK,
+		.platform_data		= (void *)&orion5x_xor1_data,
+	},
+};
+
+void __init orion5x_xor_init(void)
+{
+	platform_device_register(&orion5x_xor_shared);
+
+	/*
+	 * two engines can't do memset simultaneously, this limitation
+	 * satisfied by removing memset support from one of the engines.
+	 */
+	dma_cap_set(DMA_MEMCPY, orion5x_xor0_data.cap_mask);
+	dma_cap_set(DMA_XOR, orion5x_xor0_data.cap_mask);
+	platform_device_register(&orion5x_xor0_channel);
+
+	dma_cap_set(DMA_MEMCPY, orion5x_xor1_data.cap_mask);
+	dma_cap_set(DMA_MEMSET, orion5x_xor1_data.cap_mask);
+	dma_cap_set(DMA_XOR, orion5x_xor1_data.cap_mask);
+	platform_device_register(&orion5x_xor1_channel);
+}
+
+
+/*****************************************************************************
  * Time handling
  ****************************************************************************/
 static void orion5x_timer_init(void)
@@ -382,6 +480,8 @@ static void __init orion5x_id(u32 *dev, u32 *rev, char **dev_name)
 			*dev_name = "MV88F5281-D2";
 		} else if (*rev == MV88F5281_REV_D1) {
 			*dev_name = "MV88F5281-D1";
+		} else if (*rev == MV88F5281_REV_D0) {
+			*dev_name = "MV88F5281-D0";
 		} else {
 			*dev_name = "MV88F5281-Rev-Unsupported";
 		}
@@ -416,6 +516,15 @@ void __init orion5x_init(void)
 	 * Setup Orion address map
 	 */
 	orion5x_setup_cpu_mbus_bridge();
+
+	/*
+	 * Don't issue "Wait for Interrupt" instruction if we are
+	 * running on D0 5281 silicon.
+	 */
+	if (dev == MV88F5281_DEV_ID && rev == MV88F5281_REV_D0) {
+		printk(KERN_INFO "Orion: Applying 5281 D0 WFI workaround.\n");
+		disable_hlt();
+	}
 }
 
 /*
diff --git a/arch/arm/mach-orion5x/common.h b/arch/arm/mach-orion5x/common.h
index f72cf0e77544..0bd195551a27 100644
--- a/arch/arm/mach-orion5x/common.h
+++ b/arch/arm/mach-orion5x/common.h
@@ -32,6 +32,7 @@ void orion5x_i2c_init(void);
 void orion5x_sata_init(struct mv_sata_platform_data *sata_data);
 void orion5x_uart0_init(void);
 void orion5x_uart1_init(void);
+void orion5x_xor_init(void);
 
 /*
  * PCIe/PCI functions.
@@ -40,6 +41,7 @@ struct pci_bus;
 struct pci_sys_data;
 
 void orion5x_pcie_id(u32 *dev, u32 *rev);
+void orion5x_pci_disable(void);
 void orion5x_pci_set_cardbus_mode(void);
 int orion5x_pci_sys_setup(int nr, struct pci_sys_data *sys);
 struct pci_bus *orion5x_pci_sys_scan_bus(int nr, struct pci_sys_data *sys);
diff --git a/arch/arm/mach-orion5x/db88f5281-setup.c b/arch/arm/mach-orion5x/db88f5281-setup.c
index 88405e74e5e3..ff13e9060b18 100644
--- a/arch/arm/mach-orion5x/db88f5281-setup.c
+++ b/arch/arm/mach-orion5x/db88f5281-setup.c
@@ -24,8 +24,8 @@
 #include <asm/gpio.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/pci.h>
-#include <asm/arch/orion5x.h>
-#include <asm/plat-orion/orion_nand.h>
+#include <mach/orion5x.h>
+#include <plat/orion_nand.h>
 #include "common.h"
 #include "mpp.h"
 
@@ -213,7 +213,7 @@ void __init db88f5281_pci_preinit(void)
 	pin = DB88F5281_PCI_SLOT0_IRQ_PIN;
 	if (gpio_request(pin, "PCI Int1") == 0) {
 		if (gpio_direction_input(pin) == 0) {
-			set_irq_type(gpio_to_irq(pin), IRQT_LOW);
+			set_irq_type(gpio_to_irq(pin), IRQ_TYPE_LEVEL_LOW);
 		} else {
 			printk(KERN_ERR "db88f5281_pci_preinit faield to "
 					"set_irq_type pin %d\n", pin);
@@ -226,7 +226,7 @@ void __init db88f5281_pci_preinit(void)
 	pin = DB88F5281_PCI_SLOT1_SLOT2_IRQ_PIN;
 	if (gpio_request(pin, "PCI Int2") == 0) {
 		if (gpio_direction_input(pin) == 0) {
-			set_irq_type(gpio_to_irq(pin), IRQT_LOW);
+			set_irq_type(gpio_to_irq(pin), IRQ_TYPE_LEVEL_LOW);
 		} else {
 			printk(KERN_ERR "db88f5281_pci_preinit faield "
 					"to set_irq_type pin %d\n", pin);
diff --git a/arch/arm/mach-orion5x/dns323-setup.c b/arch/arm/mach-orion5x/dns323-setup.c
index 3791ca6f001a..b38c65ccfb15 100644
--- a/arch/arm/mach-orion5x/dns323-setup.c
+++ b/arch/arm/mach-orion5x/dns323-setup.c
@@ -25,7 +25,7 @@
 #include <asm/gpio.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/pci.h>
-#include <asm/arch/orion5x.h>
+#include <mach/orion5x.h>
 #include "common.h"
 #include "mpp.h"
 
@@ -245,12 +245,8 @@ static struct orion5x_mpp_mode dns323_mpp_modes[] __initdata = {
 static struct i2c_board_info __initdata dns323_i2c_devices[] = {
 	{
 		I2C_BOARD_INFO("g760a", 0x3e),
-#if 0
-	/* this entry requires the new-style driver model lm75 driver,
-	 * for the meantime "insmod lm75.ko force_lm75=0,0x48" is needed */
 	}, {
-		I2C_BOARD_INFO("g751", 0x48),
-#endif
+		I2C_BOARD_INFO("lm75", 0x48),
 	}, {
 		I2C_BOARD_INFO("m41t80", 0x68),
 	},
diff --git a/arch/arm/mach-orion5x/gpio.c b/arch/arm/mach-orion5x/gpio.c
index d09797990f41..cd8a16f67d2b 100644
--- a/arch/arm/mach-orion5x/gpio.c
+++ b/arch/arm/mach-orion5x/gpio.c
@@ -17,7 +17,7 @@
 #include <linux/bitops.h>
 #include <asm/gpio.h>
 #include <asm/io.h>
-#include <asm/arch/orion5x.h>
+#include <mach/orion5x.h>
 #include "common.h"
 
 static DEFINE_SPINLOCK(gpio_lock);
diff --git a/arch/arm/mach-orion5x/include/mach/debug-macro.S b/arch/arm/mach-orion5x/include/mach/debug-macro.S
new file mode 100644
index 000000000000..c7f808bfe272
--- /dev/null
+++ b/arch/arm/mach-orion5x/include/mach/debug-macro.S
@@ -0,0 +1,22 @@
+/*
+ * arch/arm/mach-orion5x/include/mach/debug-macro.S
+ *
+ * Debugging macro include header
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <mach/orion5x.h>
+
+	.macro  addruart,rx
+	mrc	p15, 0, \rx, c1, c0
+	tst	\rx, #1					@ MMU enabled?
+	ldreq	\rx, =ORION5X_REGS_PHYS_BASE
+	ldrne	\rx, =ORION5X_REGS_VIRT_BASE
+	orr	\rx, \rx, #0x00012000
+	.endm
+
+#define UART_SHIFT	2
+#include <asm/hardware/debug-8250.S>
diff --git a/include/asm-arm/arch-orion5x/dma.h b/arch/arm/mach-orion5x/include/mach/dma.h
index 40a8c178f10d..40a8c178f10d 100644
--- a/include/asm-arm/arch-orion5x/dma.h
+++ b/arch/arm/mach-orion5x/include/mach/dma.h
diff --git a/arch/arm/mach-orion5x/include/mach/entry-macro.S b/arch/arm/mach-orion5x/include/mach/entry-macro.S
new file mode 100644
index 000000000000..4351937035cd
--- /dev/null
+++ b/arch/arm/mach-orion5x/include/mach/entry-macro.S
@@ -0,0 +1,31 @@
+/*
+ * arch/arm/mach-orion5x/include/mach/entry-macro.S
+ *
+ * Low-level IRQ helper macros for Orion platforms
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <mach/orion5x.h>
+
+	.macro  disable_fiq
+	.endm
+
+	.macro  arch_ret_to_user, tmp1, tmp2
+	.endm
+
+	.macro  get_irqnr_preamble, base, tmp
+	ldr	\base, =MAIN_IRQ_CAUSE
+	.endm
+
+	.macro  get_irqnr_and_base, irqnr, irqstat, base, tmp
+	ldr	\irqstat, [\base, #0]		@ main cause
+	ldr	\tmp, [\base, #(MAIN_IRQ_MASK - MAIN_IRQ_CAUSE)] @ main mask
+	mov	\irqnr, #0			@ default irqnr
+	@ find cause bits that are unmasked
+	ands	\irqstat, \irqstat, \tmp	@ clear Z flag if any
+	clzne	\irqnr,	\irqstat		@ calc irqnr
+	rsbne	\irqnr, \irqnr, #31
+	.endm
diff --git a/arch/arm/mach-orion5x/include/mach/gpio.h b/arch/arm/mach-orion5x/include/mach/gpio.h
new file mode 100644
index 000000000000..65dc136a86f7
--- /dev/null
+++ b/arch/arm/mach-orion5x/include/mach/gpio.h
@@ -0,0 +1,28 @@
+/*
+ * arch/arm/mach-orion5x/include/mach/gpio.h
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+extern int gpio_request(unsigned pin, const char *label);
+extern void gpio_free(unsigned pin);
+extern int gpio_direction_input(unsigned pin);
+extern int gpio_direction_output(unsigned pin, int value);
+extern int gpio_get_value(unsigned pin);
+extern void gpio_set_value(unsigned pin, int value);
+extern void orion5x_gpio_set_blink(unsigned pin, int blink);
+extern void gpio_display(void);		/* debug */
+
+static inline int gpio_to_irq(int pin)
+{
+	return pin + IRQ_ORION5X_GPIO_START;
+}
+
+static inline int irq_to_gpio(int irq)
+{
+	return irq - IRQ_ORION5X_GPIO_START;
+}
+
+#include <asm-generic/gpio.h>		/* cansleep wrappers */
diff --git a/arch/arm/mach-orion5x/include/mach/hardware.h b/arch/arm/mach-orion5x/include/mach/hardware.h
new file mode 100644
index 000000000000..e51aaf4bf2b5
--- /dev/null
+++ b/arch/arm/mach-orion5x/include/mach/hardware.h
@@ -0,0 +1,21 @@
+/*
+ * arch/arm/mach-orion5x/include/mach/hardware.h
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_HARDWARE_H
+#define __ASM_ARCH_HARDWARE_H
+
+#include "orion5x.h"
+
+#define pcibios_assign_all_busses()	1
+
+#define PCIBIOS_MIN_IO		0x00001000
+#define PCIBIOS_MIN_MEM		0x01000000
+#define PCIMEM_BASE		ORION5X_PCIE_MEM_PHYS_BASE
+
+
+#endif
diff --git a/arch/arm/mach-orion5x/include/mach/io.h b/arch/arm/mach-orion5x/include/mach/io.h
new file mode 100644
index 000000000000..f24b2513f7f3
--- /dev/null
+++ b/arch/arm/mach-orion5x/include/mach/io.h
@@ -0,0 +1,63 @@
+/*
+ * arch/arm/mach-orion5x/include/mach/io.h
+ *
+ * Tzachi Perelstein <tzachi@marvell.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __ASM_ARCH_IO_H
+#define __ASM_ARCH_IO_H
+
+#include "orion5x.h"
+
+#define IO_SPACE_LIMIT		0xffffffff
+
+static inline void __iomem *
+__arch_ioremap(unsigned long paddr, size_t size, unsigned int mtype)
+{
+	void __iomem *retval;
+	unsigned long offs = paddr - ORION5X_REGS_PHYS_BASE;
+	if (mtype == MT_DEVICE && size && offs < ORION5X_REGS_SIZE &&
+	    size <= ORION5X_REGS_SIZE && offs + size <= ORION5X_REGS_SIZE) {
+		retval = (void __iomem *)ORION5X_REGS_VIRT_BASE + offs;
+	} else {
+		retval = __arm_ioremap(paddr, size, mtype);
+	}
+
+	return retval;
+}
+
+static inline void
+__arch_iounmap(void __iomem *addr)
+{
+	if (addr < (void __iomem *)ORION5X_REGS_VIRT_BASE ||
+	    addr >= (void __iomem *)(ORION5X_REGS_VIRT_BASE + ORION5X_REGS_SIZE))
+		__iounmap(addr);
+}
+
+static inline void __iomem *__io(unsigned long addr)
+{
+	return (void __iomem *)addr;
+}
+
+#define __arch_ioremap(p, s, m)	__arch_ioremap(p, s, m)
+#define __arch_iounmap(a)	__arch_iounmap(a)
+#define __io(a)			__io(a)
+#define __mem_pci(a)		(a)
+
+
+/*****************************************************************************
+ * Helpers to access Orion registers
+ ****************************************************************************/
+/*
+ * These are not preempt-safe.  Locks, if needed, must be taken
+ * care of by the caller.
+ */
+#define orion5x_setbits(r, mask)	writel(readl(r) | (mask), (r))
+#define orion5x_clrbits(r, mask)	writel(readl(r) & ~(mask), (r))
+
+
+#endif
diff --git a/arch/arm/mach-orion5x/include/mach/irqs.h b/arch/arm/mach-orion5x/include/mach/irqs.h
new file mode 100644
index 000000000000..d5b0fbf6b965
--- /dev/null
+++ b/arch/arm/mach-orion5x/include/mach/irqs.h
@@ -0,0 +1,62 @@
+/*
+ * arch/arm/mach-orion5x/include/mach/irqs.h
+ *
+ * IRQ definitions for Orion SoC
+ *
+ *  Maintainer: Tzachi Perelstein <tzachi@marvell.com>
+ *
+ *  This file is licensed under the terms of the GNU General Public
+ *  License version 2. This program is licensed "as is" without any
+ *  warranty of any kind, whether express or implied.
+ */
+
+#ifndef __ASM_ARCH_IRQS_H
+#define __ASM_ARCH_IRQS_H
+
+#include "orion5x.h"	/* need GPIO_MAX */
+
+/*
+ * Orion Main Interrupt Controller
+ */
+#define IRQ_ORION5X_BRIDGE		0
+#define IRQ_ORION5X_DOORBELL_H2C	1
+#define IRQ_ORION5X_DOORBELL_C2H	2
+#define IRQ_ORION5X_UART0		3
+#define IRQ_ORION5X_UART1		4
+#define IRQ_ORION5X_I2C			5
+#define IRQ_ORION5X_GPIO_0_7		6
+#define IRQ_ORION5X_GPIO_8_15		7
+#define IRQ_ORION5X_GPIO_16_23		8
+#define IRQ_ORION5X_GPIO_24_31		9
+#define IRQ_ORION5X_PCIE0_ERR		10
+#define IRQ_ORION5X_PCIE0_INT		11
+#define IRQ_ORION5X_USB1_CTRL		12
+#define IRQ_ORION5X_DEV_BUS_ERR		14
+#define IRQ_ORION5X_PCI_ERR		15
+#define IRQ_ORION5X_USB_BR_ERR		16
+#define IRQ_ORION5X_USB0_CTRL		17
+#define IRQ_ORION5X_ETH_RX		18
+#define IRQ_ORION5X_ETH_TX		19
+#define IRQ_ORION5X_ETH_MISC		20
+#define IRQ_ORION5X_ETH_SUM		21
+#define IRQ_ORION5X_ETH_ERR		22
+#define IRQ_ORION5X_IDMA_ERR		23
+#define IRQ_ORION5X_IDMA_0		24
+#define IRQ_ORION5X_IDMA_1		25
+#define IRQ_ORION5X_IDMA_2		26
+#define IRQ_ORION5X_IDMA_3		27
+#define IRQ_ORION5X_CESA		28
+#define IRQ_ORION5X_SATA		29
+#define IRQ_ORION5X_XOR0		30
+#define IRQ_ORION5X_XOR1		31
+
+/*
+ * Orion General Purpose Pins
+ */
+#define IRQ_ORION5X_GPIO_START	32
+#define NR_GPIO_IRQS		GPIO_MAX
+
+#define NR_IRQS			(IRQ_ORION5X_GPIO_START + NR_GPIO_IRQS)
+
+
+#endif
diff --git a/arch/arm/mach-orion5x/include/mach/memory.h b/arch/arm/mach-orion5x/include/mach/memory.h
new file mode 100644
index 000000000000..54dd76b013f2
--- /dev/null
+++ b/arch/arm/mach-orion5x/include/mach/memory.h
@@ -0,0 +1,16 @@
+/*
+ * arch/arm/mach-orion5x/include/mach/memory.h
+ *
+ * Marvell Orion memory definitions
+ */
+
+#ifndef __ASM_ARCH_MEMORY_H
+#define __ASM_ARCH_MEMORY_H
+
+#define PHYS_OFFSET	UL(0x00000000)
+
+#define __virt_to_bus(x)	__virt_to_phys(x)
+#define __bus_to_virt(x)	__phys_to_virt(x)
+
+
+#endif
diff --git a/include/asm-arm/arch-orion5x/orion5x.h b/arch/arm/mach-orion5x/include/mach/orion5x.h
index 10257f5c5e9e..61eb74a88862 100644
--- a/include/asm-arm/arch-orion5x/orion5x.h
+++ b/arch/arm/mach-orion5x/include/mach/orion5x.h
@@ -1,5 +1,5 @@
 /*
- * include/asm-arm/arch-orion5x/orion5x.h
+ * arch/arm/mach-orion5x/include/mach/orion5x.h
  *
  * Generic definitions of Orion SoC flavors:
  *  Orion-1, Orion-VoIP, Orion-NAS, and Orion-2.
@@ -73,6 +73,7 @@
 #define MV88F5182_REV_A2	2
 /* Orion-2 (88F5281) */
 #define MV88F5281_DEV_ID	0x5281
+#define MV88F5281_REV_D0	4
 #define MV88F5281_REV_D1	5
 #define MV88F5281_REV_D2	6
 
@@ -105,6 +106,10 @@
 #define ORION5X_USB0_VIRT_BASE		(ORION5X_REGS_VIRT_BASE | 0x50000)
 #define ORION5X_USB0_REG(x)		(ORION5X_USB0_VIRT_BASE | (x))
 
+#define ORION5X_XOR_PHYS_BASE		(ORION5X_REGS_PHYS_BASE | 0x60900)
+#define ORION5X_XOR_VIRT_BASE		(ORION5X_REGS_VIRT_BASE | 0x60900)
+#define ORION5X_XOR_REG(x)		(ORION5X_XOR_VIRT_BASE | (x))
+
 #define ORION5X_ETH_PHYS_BASE		(ORION5X_REGS_PHYS_BASE | 0x70000)
 #define ORION5X_ETH_VIRT_BASE		(ORION5X_REGS_VIRT_BASE | 0x70000)
 #define ORION5X_ETH_REG(x)		(ORION5X_ETH_VIRT_BASE | (x))
diff --git a/arch/arm/mach-orion5x/include/mach/system.h b/arch/arm/mach-orion5x/include/mach/system.h
new file mode 100644
index 000000000000..08e430757890
--- /dev/null
+++ b/arch/arm/mach-orion5x/include/mach/system.h
@@ -0,0 +1,32 @@
+/*
+ * arch/arm/mach-orion5x/include/mach/system.h
+ *
+ * Tzachi Perelstein <tzachi@marvell.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __ASM_ARCH_SYSTEM_H
+#define __ASM_ARCH_SYSTEM_H
+
+#include <mach/hardware.h>
+#include <mach/orion5x.h>
+
+static inline void arch_idle(void)
+{
+	cpu_do_idle();
+}
+
+static inline void arch_reset(char mode)
+{
+	/*
+	 * Enable and issue soft reset
+	 */
+	orion5x_setbits(CPU_RESET_MASK, (1 << 2));
+	orion5x_setbits(CPU_SOFT_RESET, 1);
+}
+
+
+#endif
diff --git a/arch/arm/mach-orion5x/include/mach/timex.h b/arch/arm/mach-orion5x/include/mach/timex.h
new file mode 100644
index 000000000000..e82e44db7629
--- /dev/null
+++ b/arch/arm/mach-orion5x/include/mach/timex.h
@@ -0,0 +1,13 @@
+/*
+ * arch/arm/mach-orion5x/include/mach/timex.h
+ *
+ * Tzachi Perelstein <tzachi@marvell.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#define CLOCK_TICK_RATE		(100 * HZ)
+
+#define ORION5X_TCLK		166666667
diff --git a/arch/arm/mach-orion5x/include/mach/uncompress.h b/arch/arm/mach-orion5x/include/mach/uncompress.h
new file mode 100644
index 000000000000..4322dba468a4
--- /dev/null
+++ b/arch/arm/mach-orion5x/include/mach/uncompress.h
@@ -0,0 +1,49 @@
+/*
+ * arch/arm/mach-orion5x/include/mach/uncompress.h
+ *
+ * Tzachi Perelstein <tzachi@marvell.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/serial_reg.h>
+#include <mach/orion5x.h>
+
+#define SERIAL_BASE	((unsigned char *)UART0_PHYS_BASE)
+
+static void putc(const char c)
+{
+	unsigned char *base = SERIAL_BASE;
+	int i;
+
+	for (i = 0; i < 0x1000; i++) {
+		if (base[UART_LSR << 2] & UART_LSR_THRE)
+			break;
+		barrier();
+	}
+
+	base[UART_TX << 2] = c;
+}
+
+static void flush(void)
+{
+	unsigned char *base = SERIAL_BASE;
+	unsigned char mask;
+	int i;
+
+	mask = UART_LSR_TEMT | UART_LSR_THRE;
+
+	for (i = 0; i < 0x1000; i++) {
+		if ((base[UART_LSR << 2] & mask) == mask)
+			break;
+		barrier();
+	}
+}
+
+/*
+ * nothing to do
+ */
+#define arch_decomp_setup()
+#define arch_decomp_wdog()
diff --git a/arch/arm/mach-orion5x/include/mach/vmalloc.h b/arch/arm/mach-orion5x/include/mach/vmalloc.h
new file mode 100644
index 000000000000..7147a297e97f
--- /dev/null
+++ b/arch/arm/mach-orion5x/include/mach/vmalloc.h
@@ -0,0 +1,5 @@
+/*
+ * arch/arm/mach-orion5x/include/mach/vmalloc.h
+ */
+
+#define VMALLOC_END       0xfd800000
diff --git a/arch/arm/mach-orion5x/irq.c b/arch/arm/mach-orion5x/irq.c
index e2a0084ab4a3..2545ff9e5830 100644
--- a/arch/arm/mach-orion5x/irq.c
+++ b/arch/arm/mach-orion5x/irq.c
@@ -15,8 +15,8 @@
 #include <linux/irq.h>
 #include <asm/gpio.h>
 #include <asm/io.h>
-#include <asm/arch/orion5x.h>
-#include <asm/plat-orion/irq.h>
+#include <mach/orion5x.h>
+#include <plat/irq.h>
 #include "common.h"
 
 /*****************************************************************************
@@ -91,27 +91,27 @@ static int orion5x_gpio_set_irq_type(u32 irq, u32 type)
 	desc = irq_desc + irq;
 
 	switch (type) {
-	case IRQT_HIGH:
+	case IRQ_TYPE_LEVEL_HIGH:
 		desc->handle_irq = handle_level_irq;
 		desc->status |= IRQ_LEVEL;
 		orion5x_clrbits(GPIO_IN_POL, (1 << pin));
 		break;
-	case IRQT_LOW:
+	case IRQ_TYPE_LEVEL_LOW:
 		desc->handle_irq = handle_level_irq;
 		desc->status |= IRQ_LEVEL;
 		orion5x_setbits(GPIO_IN_POL, (1 << pin));
 		break;
-	case IRQT_RISING:
+	case IRQ_TYPE_EDGE_RISING:
 		desc->handle_irq = handle_edge_irq;
 		desc->status &= ~IRQ_LEVEL;
 		orion5x_clrbits(GPIO_IN_POL, (1 << pin));
 		break;
-	case IRQT_FALLING:
+	case IRQ_TYPE_EDGE_FALLING:
 		desc->handle_irq = handle_edge_irq;
 		desc->status &= ~IRQ_LEVEL;
 		orion5x_setbits(GPIO_IN_POL, (1 << pin));
 		break;
-	case IRQT_BOTHEDGE:
+	case IRQ_TYPE_EDGE_BOTH:
 		desc->handle_irq = handle_edge_irq;
 		desc->status &= ~IRQ_LEVEL;
 		/*
@@ -156,7 +156,7 @@ static void orion5x_gpio_irq_handler(unsigned int irq, struct irq_desc *desc)
 		if (cause & (1 << pin)) {
 			irq = gpio_to_irq(pin);
 			desc = irq_desc + irq;
-			if ((desc->status & IRQ_TYPE_SENSE_MASK) == IRQT_BOTHEDGE) {
+			if ((desc->status & IRQ_TYPE_SENSE_MASK) == IRQ_TYPE_EDGE_BOTH) {
 				/* Swap polarity (race with GPIO line) */
 				u32 polarity = readl(GPIO_IN_POL);
 				polarity ^= 1 << pin;
diff --git a/arch/arm/mach-orion5x/kurobox_pro-setup.c b/arch/arm/mach-orion5x/kurobox_pro-setup.c
index 84feac4a1fe2..e321ec331839 100644
--- a/arch/arm/mach-orion5x/kurobox_pro-setup.c
+++ b/arch/arm/mach-orion5x/kurobox_pro-setup.c
@@ -24,8 +24,8 @@
 #include <asm/gpio.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/pci.h>
-#include <asm/arch/orion5x.h>
-#include <asm/plat-orion/orion_nand.h>
+#include <mach/orion5x.h>
+#include <plat/orion_nand.h>
 #include "common.h"
 #include "mpp.h"
 
@@ -146,8 +146,10 @@ static struct hw_pci kurobox_pro_pci __initdata = {
 
 static int __init kurobox_pro_pci_init(void)
 {
-	if (machine_is_kurobox_pro())
+	if (machine_is_kurobox_pro()) {
+		orion5x_pci_disable();
 		pci_common_init(&kurobox_pro_pci);
+	}
 
 	return 0;
 }
@@ -356,6 +358,7 @@ static void __init kurobox_pro_init(void)
 	orion5x_sata_init(&kurobox_pro_sata_data);
 	orion5x_uart0_init();
 	orion5x_uart1_init();
+	orion5x_xor_init();
 
 	orion5x_setup_dev_boot_win(KUROBOX_PRO_NOR_BOOT_BASE,
 				   KUROBOX_PRO_NOR_BOOT_SIZE);
diff --git a/arch/arm/mach-orion5x/mpp.c b/arch/arm/mach-orion5x/mpp.c
index a48cadb01590..c04ab0e16ea1 100644
--- a/arch/arm/mach-orion5x/mpp.c
+++ b/arch/arm/mach-orion5x/mpp.c
@@ -11,7 +11,7 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/mbus.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 #include "common.h"
 #include "mpp.h"
diff --git a/arch/arm/mach-orion5x/mss2-setup.c b/arch/arm/mach-orion5x/mss2-setup.c
index 7ce9e407d9d1..53ff1893b883 100644
--- a/arch/arm/mach-orion5x/mss2-setup.c
+++ b/arch/arm/mach-orion5x/mss2-setup.c
@@ -25,7 +25,7 @@
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/pci.h>
-#include <asm/arch/orion5x.h>
+#include <mach/orion5x.h>
 #include "common.h"
 #include "mpp.h"
 
@@ -239,6 +239,7 @@ static void __init mss2_init(void)
 	orion5x_i2c_init();
 	orion5x_sata_init(&mss2_sata_data);
 	orion5x_uart0_init();
+	orion5x_xor_init();
 
 	orion5x_setup_dev_boot_win(MSS2_NOR_BOOT_BASE, MSS2_NOR_BOOT_SIZE);
 	platform_device_register(&mss2_nor_flash);
diff --git a/arch/arm/mach-orion5x/mv2120-setup.c b/arch/arm/mach-orion5x/mv2120-setup.c
index 55f3b0fdef8b..978d4d599396 100644
--- a/arch/arm/mach-orion5x/mv2120-setup.c
+++ b/arch/arm/mach-orion5x/mv2120-setup.c
@@ -22,7 +22,7 @@
 #include <asm/mach-types.h>
 #include <asm/gpio.h>
 #include <asm/mach/arch.h>
-#include <asm/arch/orion5x.h>
+#include <mach/orion5x.h>
 #include "common.h"
 #include "mpp.h"
 
@@ -203,6 +203,7 @@ static void __init mv2120_init(void)
 	orion5x_i2c_init();
 	orion5x_sata_init(&mv2120_sata_data);
 	orion5x_uart0_init();
+	orion5x_xor_init();
 
 	orion5x_setup_dev_boot_win(MV2120_NOR_BOOT_BASE, MV2120_NOR_BOOT_SIZE);
 	platform_device_register(&mv2120_nor_flash);
diff --git a/arch/arm/mach-orion5x/pci.c b/arch/arm/mach-orion5x/pci.c
index 256a4f680935..a7b7d77b1b09 100644
--- a/arch/arm/mach-orion5x/pci.c
+++ b/arch/arm/mach-orion5x/pci.c
@@ -14,7 +14,7 @@
 #include <linux/pci.h>
 #include <linux/mbus.h>
 #include <asm/mach/pci.h>
-#include <asm/plat-orion/pcie.h>
+#include <plat/pcie.h>
 #include "common.h"
 
 /*****************************************************************************
@@ -541,6 +541,13 @@ static void __devinit rc_pci_fixup(struct pci_dev *dev)
 }
 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_MARVELL, PCI_ANY_ID, rc_pci_fixup);
 
+static int orion5x_pci_disabled __initdata;
+
+void __init orion5x_pci_disable(void)
+{
+	orion5x_pci_disabled = 1;
+}
+
 void __init orion5x_pci_set_cardbus_mode(void)
 {
 	orion5x_pci_cardbus_mode = 1;
@@ -553,7 +560,7 @@ int __init orion5x_pci_sys_setup(int nr, struct pci_sys_data *sys)
 	if (nr == 0) {
 		orion_pcie_set_local_bus_nr(PCIE_BASE, sys->busnr);
 		ret = pcie_setup(sys);
-	} else if (nr == 1) {
+	} else if (nr == 1 && !orion5x_pci_disabled) {
 		orion5x_pci_set_bus_nr(sys->busnr);
 		ret = pci_setup(sys);
 	}
@@ -567,7 +574,7 @@ struct pci_bus __init *orion5x_pci_sys_scan_bus(int nr, struct pci_sys_data *sys
 
 	if (nr == 0) {
 		bus = pci_scan_bus(sys->busnr, &pcie_ops, sys);
-	} else if (nr == 1) {
+	} else if (nr == 1 && !orion5x_pci_disabled) {
 		bus = pci_scan_bus(sys->busnr, &pci_ops, sys);
 	} else {
 		bus = NULL;
@@ -584,7 +591,7 @@ int __init orion5x_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
 	/*
 	 * PCIe endpoint?
 	 */
-	if (bus < orion5x_pci_local_bus_nr())
+	if (orion5x_pci_disabled || bus < orion5x_pci_local_bus_nr())
 		return IRQ_ORION5X_PCIE0_INT;
 
 	return -1;
diff --git a/arch/arm/mach-orion5x/rd88f5181l-fxo-setup.c b/arch/arm/mach-orion5x/rd88f5181l-fxo-setup.c
index d50e3650a09e..e72fe1e065e8 100644
--- a/arch/arm/mach-orion5x/rd88f5181l-fxo-setup.c
+++ b/arch/arm/mach-orion5x/rd88f5181l-fxo-setup.c
@@ -15,12 +15,13 @@
 #include <linux/irq.h>
 #include <linux/mtd/physmap.h>
 #include <linux/mv643xx_eth.h>
+#include <linux/ethtool.h>
 #include <asm/mach-types.h>
 #include <asm/gpio.h>
 #include <asm/leds.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/pci.h>
-#include <asm/arch/orion5x.h>
+#include <mach/orion5x.h>
 #include "common.h"
 #include "mpp.h"
 
@@ -88,6 +89,8 @@ static struct orion5x_mpp_mode rd88f5181l_fxo_mpp_modes[] __initdata = {
 
 static struct mv643xx_eth_platform_data rd88f5181l_fxo_eth_data = {
 	.phy_addr	= -1,
+	.speed		= SPEED_1000,
+	.duplex		= DUPLEX_FULL,
 };
 
 static void __init rd88f5181l_fxo_init(void)
diff --git a/arch/arm/mach-orion5x/rd88f5181l-ge-setup.c b/arch/arm/mach-orion5x/rd88f5181l-ge-setup.c
index b56447d32e17..a1fe3257320d 100644
--- a/arch/arm/mach-orion5x/rd88f5181l-ge-setup.c
+++ b/arch/arm/mach-orion5x/rd88f5181l-ge-setup.c
@@ -15,13 +15,14 @@
 #include <linux/irq.h>
 #include <linux/mtd/physmap.h>
 #include <linux/mv643xx_eth.h>
+#include <linux/ethtool.h>
 #include <linux/i2c.h>
 #include <asm/mach-types.h>
 #include <asm/gpio.h>
 #include <asm/leds.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/pci.h>
-#include <asm/arch/orion5x.h>
+#include <mach/orion5x.h>
 #include "common.h"
 #include "mpp.h"
 
@@ -89,6 +90,8 @@ static struct orion5x_mpp_mode rd88f5181l_ge_mpp_modes[] __initdata = {
 
 static struct mv643xx_eth_platform_data rd88f5181l_ge_eth_data = {
 	.phy_addr	= -1,
+	.speed		= SPEED_1000,
+	.duplex		= DUPLEX_FULL,
 };
 
 static struct i2c_board_info __initdata rd88f5181l_ge_i2c_rtc = {
diff --git a/arch/arm/mach-orion5x/rd88f5182-setup.c b/arch/arm/mach-orion5x/rd88f5182-setup.c
index 10ae62864269..4c3bcd76ac85 100644
--- a/arch/arm/mach-orion5x/rd88f5182-setup.c
+++ b/arch/arm/mach-orion5x/rd88f5182-setup.c
@@ -24,7 +24,7 @@
 #include <asm/leds.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/pci.h>
-#include <asm/arch/orion5x.h>
+#include <mach/orion5x.h>
 #include "common.h"
 #include "mpp.h"
 
@@ -148,7 +148,7 @@ void __init rd88f5182_pci_preinit(void)
 	pin = RD88F5182_PCI_SLOT0_IRQ_A_PIN;
 	if (gpio_request(pin, "PCI IntA") == 0) {
 		if (gpio_direction_input(pin) == 0) {
-			set_irq_type(gpio_to_irq(pin), IRQT_LOW);
+			set_irq_type(gpio_to_irq(pin), IRQ_TYPE_LEVEL_LOW);
 		} else {
 			printk(KERN_ERR "rd88f5182_pci_preinit faield to "
 					"set_irq_type pin %d\n", pin);
@@ -161,7 +161,7 @@ void __init rd88f5182_pci_preinit(void)
 	pin = RD88F5182_PCI_SLOT0_IRQ_B_PIN;
 	if (gpio_request(pin, "PCI IntB") == 0) {
 		if (gpio_direction_input(pin) == 0) {
-			set_irq_type(gpio_to_irq(pin), IRQT_LOW);
+			set_irq_type(gpio_to_irq(pin), IRQ_TYPE_LEVEL_LOW);
 		} else {
 			printk(KERN_ERR "rd88f5182_pci_preinit faield to "
 					"set_irq_type pin %d\n", pin);
@@ -292,6 +292,7 @@ static void __init rd88f5182_init(void)
 	orion5x_i2c_init();
 	orion5x_sata_init(&rd88f5182_sata_data);
 	orion5x_uart0_init();
+	orion5x_xor_init();
 
 	orion5x_setup_dev_boot_win(RD88F5182_NOR_BOOT_BASE,
 				   RD88F5182_NOR_BOOT_SIZE);
diff --git a/arch/arm/mach-orion5x/ts209-setup.c b/arch/arm/mach-orion5x/ts209-setup.c
index a9cef9703d5b..9d6890514199 100644
--- a/arch/arm/mach-orion5x/ts209-setup.c
+++ b/arch/arm/mach-orion5x/ts209-setup.c
@@ -26,7 +26,7 @@
 #include <asm/gpio.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/pci.h>
-#include <asm/arch/orion5x.h>
+#include <mach/orion5x.h>
 #include "common.h"
 #include "mpp.h"
 #include "tsx09-common.h"
@@ -117,7 +117,7 @@ void __init qnap_ts209_pci_preinit(void)
 	pin = QNAP_TS209_PCI_SLOT0_IRQ_PIN;
 	if (gpio_request(pin, "PCI Int1") == 0) {
 		if (gpio_direction_input(pin) == 0) {
-			set_irq_type(gpio_to_irq(pin), IRQT_LOW);
+			set_irq_type(gpio_to_irq(pin), IRQ_TYPE_LEVEL_LOW);
 		} else {
 			printk(KERN_ERR "qnap_ts209_pci_preinit failed to "
 					"set_irq_type pin %d\n", pin);
@@ -131,7 +131,7 @@ void __init qnap_ts209_pci_preinit(void)
 	pin = QNAP_TS209_PCI_SLOT1_IRQ_PIN;
 	if (gpio_request(pin, "PCI Int2") == 0) {
 		if (gpio_direction_input(pin) == 0) {
-			set_irq_type(gpio_to_irq(pin), IRQT_LOW);
+			set_irq_type(gpio_to_irq(pin), IRQ_TYPE_LEVEL_LOW);
 		} else {
 			printk(KERN_ERR "qnap_ts209_pci_preinit failed "
 					"to set_irq_type pin %d\n", pin);
@@ -207,12 +207,12 @@ static struct i2c_board_info __initdata qnap_ts209_i2c_rtc = {
 
 static struct gpio_keys_button qnap_ts209_buttons[] = {
 	{
-		.code		= KEY_RESTART,
+		.code		= KEY_COPY,
 		.gpio		= QNAP_TS209_GPIO_KEY_MEDIA,
 		.desc		= "USB Copy Button",
 		.active_low	= 1,
 	}, {
-		.code		= KEY_POWER,
+		.code		= KEY_RESTART,
 		.gpio		= QNAP_TS209_GPIO_KEY_RESET,
 		.desc		= "Reset Button",
 		.active_low	= 1,
@@ -287,6 +287,10 @@ static void __init qnap_ts209_init(void)
 	/*
 	 * Configure peripherals.
 	 */
+	orion5x_setup_dev_boot_win(QNAP_TS209_NOR_BOOT_BASE,
+				   QNAP_TS209_NOR_BOOT_SIZE);
+	platform_device_register(&qnap_ts209_nor_flash);
+
 	orion5x_ehci0_init();
 	orion5x_ehci1_init();
 	qnap_tsx09_find_mac_addr(QNAP_TS209_NOR_BOOT_BASE +
@@ -296,10 +300,8 @@ static void __init qnap_ts209_init(void)
 	orion5x_i2c_init();
 	orion5x_sata_init(&qnap_ts209_sata_data);
 	orion5x_uart0_init();
-
-	orion5x_setup_dev_boot_win(QNAP_TS209_NOR_BOOT_BASE,
-				   QNAP_TS209_NOR_BOOT_SIZE);
-	platform_device_register(&qnap_ts209_nor_flash);
+	orion5x_uart1_init();
+	orion5x_xor_init();
 
 	platform_device_register(&qnap_ts209_button_device);
 
diff --git a/arch/arm/mach-orion5x/ts409-setup.c b/arch/arm/mach-orion5x/ts409-setup.c
index 32f0ff073b7e..d85588ac7ef8 100644
--- a/arch/arm/mach-orion5x/ts409-setup.c
+++ b/arch/arm/mach-orion5x/ts409-setup.c
@@ -3,6 +3,9 @@
  *
  * Maintainer: Sylver Bruneau <sylver.bruneau@gmail.com>
  *
+ * Copyright (C) 2008  Sylver Bruneau <sylver.bruneau@gmail.com>
+ * Copyright (C) 2008  Martin Michlmayr <tbm@cyrius.com>
+ *
  * This program is free software; you can redistribute it and/or
  * modify it under the terms of the GNU General Public License
  * as published by the Free Software Foundation; either version
@@ -16,6 +19,7 @@
 #include <linux/irq.h>
 #include <linux/mtd/physmap.h>
 #include <linux/mv643xx_eth.h>
+#include <linux/leds.h>
 #include <linux/gpio_keys.h>
 #include <linux/input.h>
 #include <linux/i2c.h>
@@ -24,7 +28,7 @@
 #include <asm/gpio.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/pci.h>
-#include <asm/arch/orion5x.h>
+#include <mach/orion5x.h>
 #include "common.h"
 #include "mpp.h"
 #include "tsx09-common.h"
@@ -162,16 +166,59 @@ static struct i2c_board_info __initdata qnap_ts409_i2c_rtc = {
 	I2C_BOARD_INFO("s35390a", 0x30),
 };
 
+/*****************************************************************************
+ * LEDs attached to GPIO
+ ****************************************************************************/
+
+static struct gpio_led ts409_led_pins[] = {
+	{
+		.name		= "ts409:red:sata1",
+		.gpio		= 4,
+		.active_low	= 1,
+	}, {
+		.name		= "ts409:red:sata2",
+		.gpio		= 5,
+		.active_low	= 1,
+	}, {
+		.name		= "ts409:red:sata3",
+		.gpio		= 6,
+		.active_low	= 1,
+	}, {
+		.name		= "ts409:red:sata4",
+		.gpio		= 7,
+		.active_low	= 1,
+	},
+};
+
+static struct gpio_led_platform_data ts409_led_data = {
+	.leds		= ts409_led_pins,
+	.num_leds	= ARRAY_SIZE(ts409_led_pins),
+};
+
+static struct platform_device ts409_leds = {
+	.name	= "leds-gpio",
+	.id	= -1,
+	.dev	= {
+		.platform_data	= &ts409_led_data,
+	},
+};
+
 /****************************************************************************
  * GPIO Attached Keys
  *     Power button is attached to the PIC microcontroller
  ****************************************************************************/
 
+#define QNAP_TS409_GPIO_KEY_RESET	14
 #define QNAP_TS409_GPIO_KEY_MEDIA	15
 
 static struct gpio_keys_button qnap_ts409_buttons[] = {
 	{
 		.code		= KEY_RESTART,
+		.gpio		= QNAP_TS409_GPIO_KEY_RESET,
+		.desc		= "Reset Button",
+		.active_low	= 1,
+	}, {
+		.code		= KEY_COPY,
 		.gpio		= QNAP_TS409_GPIO_KEY_MEDIA,
 		.desc		= "USB Copy Button",
 		.active_low	= 1,
@@ -231,6 +278,10 @@ static void __init qnap_ts409_init(void)
 	/*
 	 * Configure peripherals.
 	 */
+	orion5x_setup_dev_boot_win(QNAP_TS409_NOR_BOOT_BASE,
+				   QNAP_TS409_NOR_BOOT_SIZE);
+	platform_device_register(&qnap_ts409_nor_flash);
+
 	orion5x_ehci0_init();
 	qnap_tsx09_find_mac_addr(QNAP_TS409_NOR_BOOT_BASE +
 				 qnap_ts409_partitions[5].offset,
@@ -238,10 +289,7 @@ static void __init qnap_ts409_init(void)
 	orion5x_eth_init(&qnap_tsx09_eth_data);
 	orion5x_i2c_init();
 	orion5x_uart0_init();
-
-	orion5x_setup_dev_boot_win(QNAP_TS409_NOR_BOOT_BASE,
-				   QNAP_TS409_NOR_BOOT_SIZE);
-	platform_device_register(&qnap_ts409_nor_flash);
+	orion5x_uart1_init();
 
 	platform_device_register(&qnap_ts409_button_device);
 
@@ -255,6 +303,7 @@ static void __init qnap_ts409_init(void)
 	if (qnap_ts409_i2c_rtc.irq == 0)
 		pr_warning("qnap_ts409_init: failed to get RTC IRQ\n");
 	i2c_register_board_info(0, &qnap_ts409_i2c_rtc, 1);
+	platform_device_register(&ts409_leds);
 
 	/* register tsx09 specific power-off method */
 	pm_power_off = qnap_tsx09_power_off;
diff --git a/arch/arm/mach-orion5x/ts78xx-setup.c b/arch/arm/mach-orion5x/ts78xx-setup.c
index 77e9f351f07a..ae0a5dccd2a1 100644
--- a/arch/arm/mach-orion5x/ts78xx-setup.c
+++ b/arch/arm/mach-orion5x/ts78xx-setup.c
@@ -18,7 +18,7 @@
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
-#include <asm/arch/orion5x.h>
+#include <mach/orion5x.h>
 #include "common.h"
 #include "mpp.h"
 
@@ -256,6 +256,7 @@ static void __init ts78xx_init(void)
 	orion5x_sata_init(&ts78xx_sata_data);
 	orion5x_uart0_init();
 	orion5x_uart1_init();
+	orion5x_xor_init();
 
 	orion5x_setup_dev_boot_win(TS78XX_NOR_BOOT_BASE,
 				   TS78XX_NOR_BOOT_SIZE);
diff --git a/arch/arm/mach-orion5x/wnr854t-setup.c b/arch/arm/mach-orion5x/wnr854t-setup.c
index 1af093ff8cf3..b6bc43e07eed 100644
--- a/arch/arm/mach-orion5x/wnr854t-setup.c
+++ b/arch/arm/mach-orion5x/wnr854t-setup.c
@@ -14,11 +14,12 @@
 #include <linux/delay.h>
 #include <linux/mtd/physmap.h>
 #include <linux/mv643xx_eth.h>
+#include <linux/ethtool.h>
 #include <asm/mach-types.h>
 #include <asm/gpio.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/pci.h>
-#include <asm/arch/orion5x.h>
+#include <mach/orion5x.h>
 #include "common.h"
 #include "mpp.h"
 
@@ -92,6 +93,8 @@ static struct platform_device wnr854t_nor_flash = {
 
 static struct mv643xx_eth_platform_data wnr854t_eth_data = {
 	.phy_addr	= -1,
+	.speed		= SPEED_1000,
+	.duplex		= DUPLEX_FULL,
 };
 
 static void __init wnr854t_init(void)
diff --git a/arch/arm/mach-orion5x/wrt350n-v2-setup.c b/arch/arm/mach-orion5x/wrt350n-v2-setup.c
index aeab55c6a82d..b10da17b3fbd 100644
--- a/arch/arm/mach-orion5x/wrt350n-v2-setup.c
+++ b/arch/arm/mach-orion5x/wrt350n-v2-setup.c
@@ -14,11 +14,12 @@
 #include <linux/delay.h>
 #include <linux/mtd/physmap.h>
 #include <linux/mv643xx_eth.h>
+#include <linux/ethtool.h>
 #include <asm/mach-types.h>
 #include <asm/gpio.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/pci.h>
-#include <asm/arch/orion5x.h>
+#include <mach/orion5x.h>
 #include "common.h"
 #include "mpp.h"
 
@@ -100,6 +101,8 @@ static struct platform_device wrt350n_v2_nor_flash = {
 
 static struct mv643xx_eth_platform_data wrt350n_v2_eth_data = {
 	.phy_addr	= -1,
+	.speed		= SPEED_1000,
+	.duplex		= DUPLEX_FULL,
 };
 
 static void __init wrt350n_v2_init(void)
diff --git a/arch/arm/mach-pnx4008/clock.c b/arch/arm/mach-pnx4008/clock.c
index a5268c3ac5a7..24d036a24a72 100644
--- a/arch/arm/mach-pnx4008/clock.c
+++ b/arch/arm/mach-pnx4008/clock.c
@@ -21,10 +21,10 @@
 #include <linux/err.h>
 #include <linux/delay.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 
-#include <asm/arch/clock.h>
+#include <mach/clock.h>
 #include "clock.h"
 
 /*forward declaration*/
diff --git a/arch/arm/mach-pnx4008/core.c b/arch/arm/mach-pnx4008/core.c
index 429c796938be..3ba46ede9bbd 100644
--- a/arch/arm/mach-pnx4008/core.c
+++ b/arch/arm/mach-pnx4008/core.c
@@ -26,7 +26,7 @@
 #include <linux/device.h>
 #include <linux/spi/spi.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 #include <asm/setup.h>
 #include <asm/mach-types.h>
@@ -38,9 +38,9 @@
 #include <asm/mach/map.h>
 #include <asm/mach/time.h>
 
-#include <asm/arch/irq.h>
-#include <asm/arch/clock.h>
-#include <asm/arch/dma.h>
+#include <mach/irq.h>
+#include <mach/clock.h>
+#include <mach/dma.h>
 
 struct resource spipnx_0_resources[] = {
 	{
diff --git a/arch/arm/mach-pnx4008/dma.c b/arch/arm/mach-pnx4008/dma.c
index fe152e82590b..833c56be7344 100644
--- a/arch/arm/mach-pnx4008/dma.c
+++ b/arch/arm/mach-pnx4008/dma.c
@@ -23,12 +23,12 @@
 #include <linux/clk.h>
 
 #include <asm/system.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/dma.h>
 #include <asm/dma-mapping.h>
 #include <asm/io.h>
 #include <asm/mach/dma.h>
-#include <asm/arch/clock.h>
+#include <mach/clock.h>
 
 static struct dma_channel {
 	char *name;
diff --git a/arch/arm/mach-pnx4008/gpio.c b/arch/arm/mach-pnx4008/gpio.c
index ef179cab80e2..fb51f7279e95 100644
--- a/arch/arm/mach-pnx4008/gpio.c
+++ b/arch/arm/mach-pnx4008/gpio.c
@@ -18,8 +18,8 @@
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <asm/io.h>
-#include <asm/arch/platform.h>
-#include <asm/arch/gpio.h>
+#include <mach/platform.h>
+#include <mach/gpio.h>
 
 /* register definitions */
 #define PIO_VA_BASE	IO_ADDRESS(PNX4008_PIO_BASE)
diff --git a/arch/arm/mach-pnx4008/i2c.c b/arch/arm/mach-pnx4008/i2c.c
index 6f308827c4fe..87c093286ff9 100644
--- a/arch/arm/mach-pnx4008/i2c.c
+++ b/arch/arm/mach-pnx4008/i2c.c
@@ -14,8 +14,8 @@
 #include <linux/i2c-pnx.h>
 #include <linux/platform_device.h>
 #include <linux/err.h>
-#include <asm/arch/platform.h>
-#include <asm/arch/i2c.h>
+#include <mach/platform.h>
+#include <mach/i2c.h>
 
 static int set_clock_run(struct platform_device *pdev)
 {
diff --git a/arch/arm/mach-pnx4008/include/mach/clock.h b/arch/arm/mach-pnx4008/include/mach/clock.h
new file mode 100644
index 000000000000..8d2a5ef52c90
--- /dev/null
+++ b/arch/arm/mach-pnx4008/include/mach/clock.h
@@ -0,0 +1,62 @@
+/*
+ * arch/arm/mach-pnx4008/include/mach/clock.h
+ *
+ * Clock control driver for PNX4008 - header file
+ *
+ * Authors: Vitaly Wool, Dmitry Chigirev <source@mvista.com>
+ *
+ * 2005 (c) MontaVista Software, Inc. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+#ifndef __PNX4008_CLOCK_H__
+#define __PNX4008_CLOCK_H__
+
+struct module;
+struct clk;
+
+#define PWRMAN_VA_BASE		IO_ADDRESS(PNX4008_PWRMAN_BASE)
+#define HCLKDIVCTRL_REG		(PWRMAN_VA_BASE + 0x40)
+#define PWRCTRL_REG		(PWRMAN_VA_BASE + 0x44)
+#define PLLCTRL_REG		(PWRMAN_VA_BASE + 0x48)
+#define OSC13CTRL_REG		(PWRMAN_VA_BASE + 0x4c)
+#define SYSCLKCTRL_REG		(PWRMAN_VA_BASE + 0x50)
+#define HCLKPLLCTRL_REG		(PWRMAN_VA_BASE + 0x58)
+#define USBCTRL_REG		(PWRMAN_VA_BASE + 0x64)
+#define SDRAMCLKCTRL_REG	(PWRMAN_VA_BASE + 0x68)
+#define MSCTRL_REG		(PWRMAN_VA_BASE + 0x80)
+#define BTCLKCTRL		(PWRMAN_VA_BASE + 0x84)
+#define DUMCLKCTRL_REG		(PWRMAN_VA_BASE + 0x90)
+#define I2CCLKCTRL_REG		(PWRMAN_VA_BASE + 0xac)
+#define KEYCLKCTRL_REG		(PWRMAN_VA_BASE + 0xb0)
+#define TSCLKCTRL_REG		(PWRMAN_VA_BASE + 0xb4)
+#define PWMCLKCTRL_REG		(PWRMAN_VA_BASE + 0xb8)
+#define TIMCLKCTRL_REG		(PWRMAN_VA_BASE + 0xbc)
+#define SPICTRL_REG		(PWRMAN_VA_BASE + 0xc4)
+#define FLASHCLKCTRL_REG	(PWRMAN_VA_BASE + 0xc8)
+#define UART3CLK_REG		(PWRMAN_VA_BASE + 0xd0)
+#define UARTCLKCTRL_REG		(PWRMAN_VA_BASE + 0xe4)
+#define DMACLKCTRL_REG		(PWRMAN_VA_BASE + 0xe8)
+#define AUTOCLK_CTRL		(PWRMAN_VA_BASE + 0xec)
+#define JPEGCLKCTRL_REG		(PWRMAN_VA_BASE + 0xfc)
+
+#define AUDIOCONFIG_VA_BASE	IO_ADDRESS(PNX4008_AUDIOCONFIG_BASE)
+#define DSPPLLCTRL_REG		(AUDIOCONFIG_VA_BASE + 0x60)
+#define DSPCLKCTRL_REG		(AUDIOCONFIG_VA_BASE + 0x64)
+#define AUDIOCLKCTRL_REG	(AUDIOCONFIG_VA_BASE + 0x68)
+#define AUDIOPLLCTRL_REG	(AUDIOCONFIG_VA_BASE + 0x6C)
+
+#define USB_OTG_CLKCTRL_REG	IO_ADDRESS(PNX4008_USB_CONFIG_BASE + 0xff4)
+
+#define VFP9CLKCTRL_REG		IO_ADDRESS(PNX4008_DEBUG_BASE)
+
+#define CLK_RATE_13MHZ 13000
+#define CLK_RATE_1MHZ 1000
+#define CLK_RATE_208MHZ 208000
+#define CLK_RATE_48MHZ 48000
+#define CLK_RATE_32KHZ 32
+
+#define PNX4008_UART_CLK CLK_RATE_13MHZ * 1000 /* in MHz */
+
+#endif
diff --git a/arch/arm/mach-pnx4008/include/mach/debug-macro.S b/arch/arm/mach-pnx4008/include/mach/debug-macro.S
new file mode 100644
index 000000000000..6d1407f319f8
--- /dev/null
+++ b/arch/arm/mach-pnx4008/include/mach/debug-macro.S
@@ -0,0 +1,23 @@
+/* arch/arm/mach-pnx4008/include/mach/debug-macro.S
+ *
+ * Debugging macro include header
+ *
+ *  Copyright (C) 1994-1999 Russell King
+ *  Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+*/
+
+		.macro	addruart,rx
+		mrc	p15, 0, \rx, c1, c0
+		tst	\rx, #1			@ MMU enabled?
+		mov	\rx, #0x00090000
+		addeq	\rx, \rx, #0x40000000
+		addne	\rx, \rx, #0xf4000000
+		.endm
+
+#define UART_SHIFT	2
+#include <asm/hardware/debug-8250.S>
diff --git a/arch/arm/mach-pnx4008/include/mach/dma.h b/arch/arm/mach-pnx4008/include/mach/dma.h
new file mode 100644
index 000000000000..5442d04fc575
--- /dev/null
+++ b/arch/arm/mach-pnx4008/include/mach/dma.h
@@ -0,0 +1,162 @@
+/*
+ *  arch/arm/mach-pnx4008/include/mach/dma.h
+ *
+ *  PNX4008 DMA header file
+ *
+ *  Author:	Vitaly Wool
+ *  Copyright:	MontaVista Software Inc. (c) 2005
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_DMA_H
+#define __ASM_ARCH_DMA_H
+
+#include "platform.h"
+
+#define MAX_DMA_ADDRESS		0xffffffff
+
+#define MAX_DMA_CHANNELS	8
+
+#define DMAC_BASE		IO_ADDRESS(PNX4008_DMA_CONFIG_BASE)
+#define DMAC_INT_STAT		(DMAC_BASE + 0x0000)
+#define DMAC_INT_TC_STAT	(DMAC_BASE + 0x0004)
+#define DMAC_INT_TC_CLEAR	(DMAC_BASE + 0x0008)
+#define DMAC_INT_ERR_STAT	(DMAC_BASE + 0x000c)
+#define DMAC_INT_ERR_CLEAR	(DMAC_BASE + 0x0010)
+#define DMAC_SOFT_SREQ		(DMAC_BASE + 0x0024)
+#define DMAC_CONFIG		(DMAC_BASE + 0x0030)
+#define DMAC_Cx_SRC_ADDR(c)	(DMAC_BASE + 0x0100 + (c) * 0x20)
+#define DMAC_Cx_DEST_ADDR(c)	(DMAC_BASE + 0x0104 + (c) * 0x20)
+#define DMAC_Cx_LLI(c)		(DMAC_BASE + 0x0108 + (c) * 0x20)
+#define DMAC_Cx_CONTROL(c)	(DMAC_BASE + 0x010c + (c) * 0x20)
+#define DMAC_Cx_CONFIG(c)	(DMAC_BASE + 0x0110 + (c) * 0x20)
+
+enum {
+	WIDTH_BYTE = 0,
+	WIDTH_HWORD,
+	WIDTH_WORD
+};
+
+enum {
+	FC_MEM2MEM_DMA,
+	FC_MEM2PER_DMA,
+	FC_PER2MEM_DMA,
+	FC_PER2PER_DMA,
+	FC_PER2PER_DPER,
+	FC_MEM2PER_PER,
+	FC_PER2MEM_PER,
+	FC_PER2PER_SPER
+};
+
+enum {
+	DMA_INT_UNKNOWN = 0,
+	DMA_ERR_INT = 1,
+	DMA_TC_INT = 2,
+};
+
+enum {
+	DMA_BUFFER_ALLOCATED = 1,
+	DMA_HAS_LL = 2,
+};
+
+enum {
+	PER_CAM_DMA_1 = 0,
+	PER_NDF_FLASH = 1,
+	PER_MBX_SLAVE_FIFO = 2,
+	PER_SPI2_REC_XMIT = 3,
+	PER_MS_SD_RX_XMIT = 4,
+	PER_HS_UART_1_XMIT = 5,
+	PER_HS_UART_1_RX = 6,
+	PER_HS_UART_2_XMIT = 7,
+	PER_HS_UART_2_RX = 8,
+	PER_HS_UART_7_XMIT = 9,
+	PER_HS_UART_7_RX = 10,
+	PER_SPI1_REC_XMIT = 11,
+	PER_MLC_NDF_SREC = 12,
+	PER_CAM_DMA_2 = 13,
+	PER_PRNG_INFIFO = 14,
+	PER_PRNG_OUTFIFO = 15,
+};
+
+struct pnx4008_dma_ch_ctrl {
+	int tc_mask;
+	int cacheable;
+	int bufferable;
+	int priv_mode;
+	int di;
+	int si;
+	int dest_ahb1;
+	int src_ahb1;
+	int dwidth;
+	int swidth;
+	int dbsize;
+	int sbsize;
+	int tr_size;
+};
+
+struct pnx4008_dma_ch_config {
+	int halt;
+	int active;
+	int lock;
+	int itc;
+	int ie;
+	int flow_cntrl;
+	int dest_per;
+	int src_per;
+};
+
+struct pnx4008_dma_ll {
+	unsigned long src_addr;
+	unsigned long dest_addr;
+	u32 next_dma;
+	unsigned long ch_ctrl;
+	struct pnx4008_dma_ll *next;
+	int flags;
+	void *alloc_data;
+	int (*free) (void *);
+};
+
+struct pnx4008_dma_config {
+	int is_ll;
+	unsigned long src_addr;
+	unsigned long dest_addr;
+	unsigned long ch_ctrl;
+	unsigned long ch_cfg;
+	struct pnx4008_dma_ll *ll;
+	u32 ll_dma;
+	int flags;
+	void *alloc_data;
+	int (*free) (void *);
+};
+
+extern struct pnx4008_dma_ll *pnx4008_alloc_ll_entry(dma_addr_t *);
+extern void pnx4008_free_ll_entry(struct pnx4008_dma_ll *, dma_addr_t);
+extern void pnx4008_free_ll(u32 ll_dma, struct pnx4008_dma_ll *);
+
+extern int pnx4008_request_channel(char *, int,
+				   void (*)(int, int, void *),
+				   void *);
+extern void pnx4008_free_channel(int);
+extern int pnx4008_config_dma(int, int, int);
+extern int pnx4008_dma_pack_control(const struct pnx4008_dma_ch_ctrl *,
+				    unsigned long *);
+extern int pnx4008_dma_parse_control(unsigned long,
+				     struct pnx4008_dma_ch_ctrl *);
+extern int pnx4008_dma_pack_config(const struct pnx4008_dma_ch_config *,
+				   unsigned long *);
+extern int pnx4008_dma_parse_config(unsigned long,
+				    struct pnx4008_dma_ch_config *);
+extern int pnx4008_config_channel(int, struct pnx4008_dma_config *);
+extern int pnx4008_channel_get_config(int, struct pnx4008_dma_config *);
+extern int pnx4008_dma_ch_enable(int);
+extern int pnx4008_dma_ch_disable(int);
+extern int pnx4008_dma_ch_enabled(int);
+extern void pnx4008_dma_split_head_entry(struct pnx4008_dma_config *,
+					 struct pnx4008_dma_ch_ctrl *);
+extern void pnx4008_dma_split_ll_entry(struct pnx4008_dma_ll *,
+				       struct pnx4008_dma_ch_ctrl *);
+
+#endif				/* _ASM_ARCH_DMA_H */
diff --git a/arch/arm/mach-pnx4008/include/mach/entry-macro.S b/arch/arm/mach-pnx4008/include/mach/entry-macro.S
new file mode 100644
index 000000000000..8003037578ed
--- /dev/null
+++ b/arch/arm/mach-pnx4008/include/mach/entry-macro.S
@@ -0,0 +1,127 @@
+/*
+ * arch/arm/mach-pnx4008/include/mach/entry-macro.S
+ *
+ * Low-level IRQ helper macros for PNX4008-based platforms
+ *
+ * 2005-2006 (c) MontaVista Software, Inc.
+ * Author: Vitaly Wool <vwool@ru.mvista.com>
+ * This file is licensed under  the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include "platform.h"
+
+#define IO_BASE         0xF0000000
+#define IO_ADDRESS(x)  (((((x) & 0xff000000) >> 4) | ((x) & 0xfffff)) | IO_BASE)
+
+#define INTRC_MASK			0x00
+#define INTRC_RAW_STAT			0x04
+#define INTRC_STAT			0x08
+#define INTRC_POLAR			0x0C
+#define INTRC_ACT_TYPE			0x10
+#define INTRC_TYPE			0x14
+
+#define SIC1_BASE_INT   32
+#define SIC2_BASE_INT   64
+
+		.macro	disable_fiq
+		.endm
+
+		.macro  get_irqnr_preamble, base, tmp
+		.endm
+
+		.macro  arch_ret_to_user, tmp1, tmp2
+		.endm
+
+		.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
+/* decode the MIC interrupt numbers */
+		ldr	\base, =IO_ADDRESS(PNX4008_INTCTRLMIC_BASE)
+		ldr	\irqstat, [\base, #INTRC_STAT]
+
+		cmp	\irqstat,#1<<16
+		movhs	\irqnr,#16
+		movlo	\irqnr,#0
+		movhs	\irqstat,\irqstat,lsr#16
+		cmp	\irqstat,#1<<8
+		addhs	\irqnr,\irqnr,#8
+		movhs	\irqstat,\irqstat,lsr#8
+		cmp	\irqstat,#1<<4
+		addhs	\irqnr,\irqnr,#4
+		movhs	\irqstat,\irqstat,lsr#4
+		cmp	\irqstat,#1<<2
+		addhs	\irqnr,\irqnr,#2
+		movhs	\irqstat,\irqstat,lsr#2
+		cmp	\irqstat,#1<<1
+		addhs	\irqnr,\irqnr,#1
+
+/* was there an interrupt ? if not then drop out with EQ status */
+		teq	\irqstat,#0
+		beq	1003f
+
+/* and now check for extended IRQ reasons */
+		cmp	\irqnr,#1
+		bls	1003f
+		cmp	\irqnr,#30
+		blo	1002f
+
+/* IRQ 31,30  : High priority cascade IRQ handle */
+/* read the correct SIC */
+/* decoding status after compare : eq is 30 (SIC1) , ne is 31 (SIC2) */
+/* set the base IRQ number */
+		ldreq	\base, =IO_ADDRESS(PNX4008_INTCTRLSIC1_BASE)
+		moveq  \irqnr,#SIC1_BASE_INT
+		ldrne	\base, =IO_ADDRESS(PNX4008_INTCTRLSIC2_BASE)
+		movne   \irqnr,#SIC2_BASE_INT
+		ldr	\irqstat, [\base, #INTRC_STAT]
+		ldr	\tmp,	  [\base, #INTRC_TYPE]
+/* and with inverted mask : low priority interrupts  */
+		and	\irqstat,\irqstat,\tmp
+		b	1004f
+
+1003:
+/* IRQ 1,0  : Low priority cascade IRQ handle */
+/* read the correct SIC */
+/* decoding status after compare : eq is 1 (SIC2) , ne is 0 (SIC1)*/
+/* read the correct SIC */
+/* set the base IRQ number  */
+		ldrne	\base, =IO_ADDRESS(PNX4008_INTCTRLSIC1_BASE)
+		movne   \irqnr,#SIC1_BASE_INT
+		ldreq	\base, =IO_ADDRESS(PNX4008_INTCTRLSIC2_BASE)
+		moveq   \irqnr,#SIC2_BASE_INT
+		ldr	\irqstat, [\base, #INTRC_STAT]
+		ldr	\tmp,	  [\base, #INTRC_TYPE]
+/* and with inverted mask : low priority interrupts  */
+		bic	\irqstat,\irqstat,\tmp
+
+1004:
+
+		cmp	\irqstat,#1<<16
+		addhs	\irqnr,\irqnr,#16
+		movhs	\irqstat,\irqstat,lsr#16
+		cmp	\irqstat,#1<<8
+		addhs	\irqnr,\irqnr,#8
+		movhs	\irqstat,\irqstat,lsr#8
+		cmp	\irqstat,#1<<4
+		addhs	\irqnr,\irqnr,#4
+		movhs	\irqstat,\irqstat,lsr#4
+		cmp	\irqstat,#1<<2
+		addhs	\irqnr,\irqnr,#2
+		movhs	\irqstat,\irqstat,lsr#2
+		cmp	\irqstat,#1<<1
+		addhs	\irqnr,\irqnr,#1
+
+
+/* is irqstat not zero */
+
+1002:
+/* we assert that irqstat is not equal to zero and return ne status if true*/
+		teq	\irqstat,#0
+1003:
+		.endm
+
+
+		.macro	irq_prio_table
+		.endm
+
+
diff --git a/arch/arm/mach-pnx4008/include/mach/gpio.h b/arch/arm/mach-pnx4008/include/mach/gpio.h
new file mode 100644
index 000000000000..9591467eb9ec
--- /dev/null
+++ b/arch/arm/mach-pnx4008/include/mach/gpio.h
@@ -0,0 +1,241 @@
+/*
+ * arch/arm/mach-pnx4008/include/mach/gpio.h
+ *
+ * PNX4008 GPIO driver - header file
+ *
+ * Author: Dmitry Chigirev <source@mvista.com>
+ *
+ * Based on reference code by Iwo Mergler and Z.Tabaaloute from Philips:
+ * Copyright (c) 2005 Koninklijke Philips Electronics N.V.
+ *
+ * 2005 (c) MontaVista Software, Inc. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+
+#ifndef _PNX4008_GPIO_H_
+#define _PNX4008_GPIO_H_
+
+
+/* Block numbers */
+#define GPIO_IN		(0)
+#define GPIO_OUT		(0x100)
+#define GPIO_BID		(0x200)
+#define GPIO_RAM		(0x300)
+#define GPIO_MUX		(0x400)
+
+#define GPIO_TYPE_MASK(K) ((K) & 0x700)
+
+/* INPUT GPIOs */
+/* GPI */
+#define GPI_00		(GPIO_IN | 0)
+#define GPI_01		(GPIO_IN | 1)
+#define GPI_02   	(GPIO_IN | 2)
+#define GPI_03 	 	(GPIO_IN | 3)
+#define GPI_04   	(GPIO_IN | 4)
+#define GPI_05   	(GPIO_IN | 5)
+#define GPI_06   	(GPIO_IN | 6)
+#define GPI_07   	(GPIO_IN | 7)
+#define GPI_08   	(GPIO_IN | 8)
+#define GPI_09   	(GPIO_IN | 9)
+#define U1_RX 		(GPIO_IN | 15)
+#define U2_HTCS 	(GPIO_IN | 16)
+#define U2_RX	 	(GPIO_IN | 17)
+#define U3_RX		(GPIO_IN | 18)
+#define U4_RX		(GPIO_IN | 19)
+#define U5_RX		(GPIO_IN | 20)
+#define U6_IRRX 	(GPIO_IN | 21)
+#define U7_HCTS 	(GPIO_IN | 22)
+#define U7_RX		(GPIO_IN | 23)
+/* MISC IN */
+#define SPI1_DATIN	(GPIO_IN | 25)
+#define DISP_SYNC	(GPIO_IN | 26)
+#define SPI2_DATIN	(GPIO_IN | 27)
+#define GPI_11  	(GPIO_IN | 28)
+
+#define GPIO_IN_MASK   0x1eff83ff
+
+/* OUTPUT GPIOs */
+/* GPO */
+#define GPO_00		(GPIO_OUT | 0)
+#define GPO_01   	(GPIO_OUT | 1)
+#define GPO_02   	(GPIO_OUT | 2)
+#define GPO_03 	 	(GPIO_OUT | 3)
+#define GPO_04   	(GPIO_OUT | 4)
+#define GPO_05   	(GPIO_OUT | 5)
+#define GPO_06   	(GPIO_OUT | 6)
+#define GPO_07   	(GPIO_OUT | 7)
+#define GPO_08		(GPIO_OUT | 8)
+#define GPO_09   	(GPIO_OUT | 9)
+#define GPO_10   	(GPIO_OUT | 10)
+#define GPO_11 	 	(GPIO_OUT | 11)
+#define GPO_12   	(GPIO_OUT | 12)
+#define GPO_13   	(GPIO_OUT | 13)
+#define GPO_14   	(GPIO_OUT | 14)
+#define GPO_15   	(GPIO_OUT | 15)
+#define GPO_16  	(GPIO_OUT | 16)
+#define GPO_17 	 	(GPIO_OUT | 17)
+#define GPO_18   	(GPIO_OUT | 18)
+#define GPO_19   	(GPIO_OUT | 19)
+#define GPO_20   	(GPIO_OUT | 20)
+#define GPO_21   	(GPIO_OUT | 21)
+#define GPO_22   	(GPIO_OUT | 22)
+#define GPO_23   	(GPIO_OUT | 23)
+
+#define GPIO_OUT_MASK   0xffffff
+
+/* BIDIRECTIONAL GPIOs */
+/* RAM pins */
+#define RAM_D19		(GPIO_RAM | 0)
+#define RAM_D20  	(GPIO_RAM | 1)
+#define RAM_D21  	(GPIO_RAM | 2)
+#define RAM_D22 	(GPIO_RAM | 3)
+#define RAM_D23  	(GPIO_RAM | 4)
+#define RAM_D24  	(GPIO_RAM | 5)
+#define RAM_D25  	(GPIO_RAM | 6)
+#define RAM_D26  	(GPIO_RAM | 7)
+#define RAM_D27		(GPIO_RAM | 8)
+#define RAM_D28  	(GPIO_RAM | 9)
+#define RAM_D29  	(GPIO_RAM | 10)
+#define RAM_D30 	(GPIO_RAM | 11)
+#define RAM_D31  	(GPIO_RAM | 12)
+
+#define GPIO_RAM_MASK   0x1fff
+
+/* I/O pins */
+#define GPIO_00  	(GPIO_BID | 25)
+#define GPIO_01 	(GPIO_BID | 26)
+#define GPIO_02  	(GPIO_BID | 27)
+#define GPIO_03  	(GPIO_BID | 28)
+#define GPIO_04 	(GPIO_BID | 29)
+#define GPIO_05  	(GPIO_BID | 30)
+
+#define GPIO_BID_MASK   0x7e000000
+
+/* Non-GPIO multiplexed PIOs. For multiplexing with GPIO, please use GPIO macros */
+#define GPIO_SDRAM_SEL 	(GPIO_MUX | 3)
+
+#define GPIO_MUX_MASK   0x8
+
+/* Extraction/assembly macros */
+#define GPIO_BIT_MASK(K) ((K) & 0x1F)
+#define GPIO_BIT(K) (1 << GPIO_BIT_MASK(K))
+#define GPIO_ISMUX(K) ((GPIO_TYPE_MASK(K) == GPIO_MUX) && (GPIO_BIT(K) & GPIO_MUX_MASK))
+#define GPIO_ISRAM(K) ((GPIO_TYPE_MASK(K) == GPIO_RAM) && (GPIO_BIT(K) & GPIO_RAM_MASK))
+#define GPIO_ISBID(K) ((GPIO_TYPE_MASK(K) == GPIO_BID) && (GPIO_BIT(K) & GPIO_BID_MASK))
+#define GPIO_ISOUT(K) ((GPIO_TYPE_MASK(K) == GPIO_OUT) && (GPIO_BIT(K) & GPIO_OUT_MASK))
+#define GPIO_ISIN(K)  ((GPIO_TYPE_MASK(K) == GPIO_IN) && (GPIO_BIT(K) & GPIO_IN_MASK))
+
+/* Start Enable Pin Interrupts - table 58 page 66 */
+
+#define SE_PIN_BASE_INT   32
+
+#define SE_U7_RX_INT            63
+#define SE_U7_HCTS_INT          62
+#define SE_BT_CLKREQ_INT        61
+#define SE_U6_IRRX_INT          60
+/*59 unused*/
+#define SE_U5_RX_INT            58
+#define SE_GPI_11_INT           57
+#define SE_U3_RX_INT            56
+#define SE_U2_HCTS_INT          55
+#define SE_U2_RX_INT            54
+#define SE_U1_RX_INT            53
+#define SE_DISP_SYNC_INT        52
+/*51 unused*/
+#define SE_SDIO_INT_N           50
+#define SE_MSDIO_START_INT      49
+#define SE_GPI_06_INT           48
+#define SE_GPI_05_INT           47
+#define SE_GPI_04_INT           46
+#define SE_GPI_03_INT           45
+#define SE_GPI_02_INT           44
+#define SE_GPI_01_INT           43
+#define SE_GPI_00_INT           42
+#define SE_SYSCLKEN_PIN_INT     41
+#define SE_SPI1_DATAIN_INT      40
+#define SE_GPI_07_INT           39
+#define SE_SPI2_DATAIN_INT      38
+#define SE_GPI_10_INT           37
+#define SE_GPI_09_INT           36
+#define SE_GPI_08_INT           35
+/*34-32 unused*/
+
+/* Start Enable Internal Interrupts - table 57 page 65 */
+
+#define SE_INT_BASE_INT   0
+
+#define SE_TS_IRQ               31
+#define SE_TS_P_INT             30
+#define SE_TS_AUX_INT           29
+/*27-28 unused*/
+#define SE_USB_AHB_NEED_CLK_INT 26
+#define SE_MSTIMER_INT          25
+#define SE_RTC_INT              24
+#define SE_USB_NEED_CLK_INT     23
+#define SE_USB_INT              22
+#define SE_USB_I2C_INT          21
+#define SE_USB_OTG_TIMER_INT    20
+#define SE_USB_OTG_ATX_INT_N    19
+/*18 unused*/
+#define SE_DSP_GPIO4_INT        17
+#define SE_KEY_IRQ              16
+#define SE_DSP_SLAVEPORT_INT    15
+#define SE_DSP_GPIO1_INT        14
+#define SE_DSP_GPIO0_INT        13
+#define SE_DSP_AHB_INT          12
+/*11-6 unused*/
+#define SE_GPIO_05_INT          5
+#define SE_GPIO_04_INT          4
+#define SE_GPIO_03_INT          3
+#define SE_GPIO_02_INT          2
+#define SE_GPIO_01_INT          1
+#define SE_GPIO_00_INT          0
+
+#define START_INT_REG_BIT(irq) (1<<((irq)&0x1F))
+
+#define START_INT_ER_REG(irq)     IO_ADDRESS((PNX4008_PWRMAN_BASE + 0x20 + (((irq)&(0x1<<5))>>1)))
+#define START_INT_RSR_REG(irq)    IO_ADDRESS((PNX4008_PWRMAN_BASE + 0x24 + (((irq)&(0x1<<5))>>1)))
+#define START_INT_SR_REG(irq)     IO_ADDRESS((PNX4008_PWRMAN_BASE + 0x28 + (((irq)&(0x1<<5))>>1)))
+#define START_INT_APR_REG(irq)    IO_ADDRESS((PNX4008_PWRMAN_BASE + 0x2C + (((irq)&(0x1<<5))>>1)))
+
+extern int pnx4008_gpio_register_pin(unsigned short pin);
+extern int pnx4008_gpio_unregister_pin(unsigned short pin);
+extern unsigned long pnx4008_gpio_read_pin(unsigned short pin);
+extern int pnx4008_gpio_write_pin(unsigned short pin, int output);
+extern int pnx4008_gpio_set_pin_direction(unsigned short pin, int output);
+extern int pnx4008_gpio_read_pin_direction(unsigned short pin);
+extern int pnx4008_gpio_set_pin_mux(unsigned short pin, int output);
+extern int pnx4008_gpio_read_pin_mux(unsigned short pin);
+
+static inline void start_int_umask(u8 irq)
+{
+	__raw_writel(__raw_readl(START_INT_ER_REG(irq)) |
+		     START_INT_REG_BIT(irq), START_INT_ER_REG(irq));
+}
+
+static inline void start_int_mask(u8 irq)
+{
+	__raw_writel(__raw_readl(START_INT_ER_REG(irq)) &
+		     ~START_INT_REG_BIT(irq), START_INT_ER_REG(irq));
+}
+
+static inline void start_int_ack(u8 irq)
+{
+	__raw_writel(START_INT_REG_BIT(irq), START_INT_RSR_REG(irq));
+}
+
+static inline void start_int_set_falling_edge(u8 irq)
+{
+	__raw_writel(__raw_readl(START_INT_APR_REG(irq)) &
+		     ~START_INT_REG_BIT(irq), START_INT_APR_REG(irq));
+}
+
+static inline void start_int_set_rising_edge(u8 irq)
+{
+	__raw_writel(__raw_readl(START_INT_APR_REG(irq)) |
+		     START_INT_REG_BIT(irq), START_INT_APR_REG(irq));
+}
+
+#endif				/* _PNX4008_GPIO_H_ */
diff --git a/arch/arm/mach-pnx4008/include/mach/hardware.h b/arch/arm/mach-pnx4008/include/mach/hardware.h
new file mode 100644
index 000000000000..7b98b828d368
--- /dev/null
+++ b/arch/arm/mach-pnx4008/include/mach/hardware.h
@@ -0,0 +1,32 @@
+/*
+ * arch/arm/mach-pnx4008/include/mach/hardware.h
+ *
+ * Copyright (c) 2005 MontaVista Software, Inc. <source@mvista.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#ifndef __ASM_ARCH_HARDWARE_H
+#define __ASM_ARCH_HARDWARE_H
+
+#include <asm/sizes.h>
+#include <mach/platform.h>
+
+/* Start of virtual addresses for IO devices */
+#define IO_BASE         0xF0000000
+
+/* This macro relies on fact that for all HW i/o addresses bits 20-23 are 0 */
+#define IO_ADDRESS(x)  (((((x) & 0xff000000) >> 4) | ((x) & 0xfffff)) | IO_BASE)
+
+#endif
diff --git a/include/asm-arm/arch-pnx4008/i2c.h b/arch/arm/mach-pnx4008/include/mach/i2c.h
index 92e8d65006f7..259ac53abf40 100644
--- a/include/asm-arm/arch-pnx4008/i2c.h
+++ b/arch/arm/mach-pnx4008/include/mach/i2c.h
@@ -12,9 +12,6 @@
 #ifndef __ASM_ARCH_I2C_H__
 #define __ASM_ARCH_I2C_H__
 
-#include <linux/pm.h>
-#include <linux/platform_device.h>
-
 enum {
 	mstatus_tdi = 0x00000001,
 	mstatus_afi = 0x00000002,
diff --git a/arch/arm/mach-pnx4008/include/mach/io.h b/arch/arm/mach-pnx4008/include/mach/io.h
new file mode 100644
index 000000000000..c6206f25839d
--- /dev/null
+++ b/arch/arm/mach-pnx4008/include/mach/io.h
@@ -0,0 +1,21 @@
+
+/*
+ *  arch/arm/mach-pnx4008/include/mach/io.h
+ *
+ * Author: Dmitry Chigirev <chigirev@ru.mvista.com>
+ *
+ * 2005 (c) MontaVista Software, Inc. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+
+#ifndef __ASM_ARM_ARCH_IO_H
+#define __ASM_ARM_ARCH_IO_H
+
+#define IO_SPACE_LIMIT 0xffffffff
+
+#define __io(a)			((void __iomem *)(a))
+#define __mem_pci(a)		(a)
+
+#endif
diff --git a/arch/arm/mach-pnx4008/include/mach/irq.h b/arch/arm/mach-pnx4008/include/mach/irq.h
new file mode 100644
index 000000000000..2a690ca33870
--- /dev/null
+++ b/arch/arm/mach-pnx4008/include/mach/irq.h
@@ -0,0 +1,42 @@
+/*
+ * arch/arm/mach-pnx4008/include/mach/irq.h
+ *
+ * PNX4008 IRQ controller driver - header file
+ * this one is used in entry-arnv.S as well so it cannot contain C code
+ *
+ * Copyright (c) 2005 Philips Semiconductors
+ * Copyright (c) 2005 MontaVista Software, Inc.
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ */
+#ifndef __PNX4008_IRQ_H__
+#define __PNX4008_IRQ_H__
+
+#define MIC_VA_BASE             IO_ADDRESS(PNX4008_INTCTRLMIC_BASE)
+#define SIC1_VA_BASE            IO_ADDRESS(PNX4008_INTCTRLSIC1_BASE)
+#define SIC2_VA_BASE            IO_ADDRESS(PNX4008_INTCTRLSIC2_BASE)
+
+/* Manual: Chapter 20, page 195 */
+
+#define INTC_BIT(irq) (1<< ((irq) & 0x1F))
+
+#define INTC_ER(irq)    IO_ADDRESS((PNX4008_INTCTRLMIC_BASE + 0x0 + (((irq)&(0x3<<5))<<9)))
+#define INTC_RSR(irq)   IO_ADDRESS((PNX4008_INTCTRLMIC_BASE + 0x4 + (((irq)&(0x3<<5))<<9)))
+#define INTC_SR(irq)    IO_ADDRESS((PNX4008_INTCTRLMIC_BASE + 0x8 + (((irq)&(0x3<<5))<<9)))
+#define INTC_APR(irq)   IO_ADDRESS((PNX4008_INTCTRLMIC_BASE + 0xC + (((irq)&(0x3<<5))<<9)))
+#define INTC_ATR(irq)   IO_ADDRESS((PNX4008_INTCTRLMIC_BASE + 0x10 + (((irq)&(0x3<<5))<<9)))
+#define INTC_ITR(irq)   IO_ADDRESS((PNX4008_INTCTRLMIC_BASE + 0x14 + (((irq)&(0x3<<5))<<9)))
+
+#define START_INT_REG_BIT(irq) (1<<((irq)&0x1F))
+
+#define START_INT_ER_REG(irq)     IO_ADDRESS((PNX4008_PWRMAN_BASE + 0x20 + (((irq)&(0x1<<5))>>1)))
+#define START_INT_RSR_REG(irq)    IO_ADDRESS((PNX4008_PWRMAN_BASE + 0x24 + (((irq)&(0x1<<5))>>1)))
+#define START_INT_SR_REG(irq)     IO_ADDRESS((PNX4008_PWRMAN_BASE + 0x28 + (((irq)&(0x1<<5))>>1)))
+#define START_INT_APR_REG(irq)    IO_ADDRESS((PNX4008_PWRMAN_BASE + 0x2C + (((irq)&(0x1<<5))>>1)))
+
+extern void __init pnx4008_init_irq(void);
+
+#endif /* __PNX4008_IRQ_H__ */
diff --git a/arch/arm/mach-pnx4008/include/mach/irqs.h b/arch/arm/mach-pnx4008/include/mach/irqs.h
new file mode 100644
index 000000000000..f6b33cf23ae2
--- /dev/null
+++ b/arch/arm/mach-pnx4008/include/mach/irqs.h
@@ -0,0 +1,215 @@
+/*
+ * arch/arm/mach-pnx4008/include/mach/irqs.h
+ *
+ * PNX4008 IRQ controller driver - header file
+ *
+ * Author: Dmitry Chigirev <source@mvista.com>
+ *
+ * 2005 (c) MontaVista Software, Inc. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+#ifndef __PNX4008_IRQS_h__
+#define __PNX4008_IRQS_h__
+
+#define NR_IRQS         96
+
+/*Manual: table 259, page 199*/
+
+/*SUB2 Interrupt Routing (SIC2)*/
+
+#define SIC2_BASE_INT   64
+
+#define CLK_SWITCH_ARM_INT 95	/*manual: Clkswitch ARM  */
+#define CLK_SWITCH_DSP_INT 94	/*manual: ClkSwitch DSP  */
+#define CLK_SWITCH_AUD_INT 93	/*manual: Clkswitch AUD  */
+#define GPI_06_INT         92
+#define GPI_05_INT         91
+#define GPI_04_INT         90
+#define GPI_03_INT         89
+#define GPI_02_INT         88
+#define GPI_01_INT         87
+#define GPI_00_INT         86
+#define BT_CLKREQ_INT      85
+#define SPI1_DATIN_INT     84
+#define U5_RX_INT          83
+#define SDIO_INT_N         82
+#define CAM_HS_INT         81
+#define CAM_VS_INT         80
+#define GPI_07_INT         79
+#define DISP_SYNC_INT      78
+#define DSP_INT8           77
+#define U7_HCTS_INT        76
+#define GPI_10_INT         75
+#define GPI_09_INT         74
+#define GPI_08_INT         73
+#define DSP_INT7           72
+#define U2_HCTS_INT        71
+#define SPI2_DATIN_INT     70
+#define GPIO_05_INT        69
+#define GPIO_04_INT        68
+#define GPIO_03_INT        67
+#define GPIO_02_INT        66
+#define GPIO_01_INT        65
+#define GPIO_00_INT        64
+
+/*Manual: table 258, page 198*/
+
+/*SUB1 Interrupt Routing (SIC1)*/
+
+#define SIC1_BASE_INT   32
+
+#define USB_I2C_INT        63
+#define USB_DEV_HP_INT     62
+#define USB_DEV_LP_INT     61
+#define USB_DEV_DMA_INT    60
+#define USB_HOST_INT       59
+#define USB_OTG_ATX_INT_N  58
+#define USB_OTG_TIMER_INT  57
+#define SW_INT             56
+#define SPI1_INT           55
+#define KEY_IRQ            54
+#define DSP_M_INT          53
+#define RTC_INT            52
+#define I2C_1_INT          51
+#define I2C_2_INT          50
+#define PLL1_LOCK_INT      49
+#define PLL2_LOCK_INT      48
+#define PLL3_LOCK_INT      47
+#define PLL4_LOCK_INT      46
+#define PLL5_LOCK_INT      45
+#define SPI2_INT           44
+#define DSP_INT1           43
+#define DSP_INT2           42
+#define DSP_TDM_INT2       41
+#define TS_AUX_INT         40
+#define TS_IRQ             39
+#define TS_P_INT           38
+#define UOUT1_TO_PAD_INT   37
+#define GPI_11_INT         36
+#define DSP_INT4           35
+#define JTAG_COMM_RX_INT   34
+#define JTAG_COMM_TX_INT   33
+#define DSP_INT3           32
+
+/*Manual: table 257, page 197*/
+
+/*MAIN Interrupt Routing*/
+
+#define MAIN_BASE_INT   0
+
+#define SUB2_FIQ_N         31	/*active low */
+#define SUB1_FIQ_N         30	/*active low */
+#define JPEG_INT           29
+#define DMA_INT            28
+#define MSTIMER_INT        27
+#define IIR1_INT           26
+#define IIR2_INT           25
+#define IIR7_INT           24
+#define DSP_TDM_INT0       23
+#define DSP_TDM_INT1       22
+#define DSP_P_INT          21
+#define DSP_INT0           20
+#define DUM_INT            19
+#define UOUT0_TO_PAD_INT   18
+#define MP4_ENC_INT        17
+#define MP4_DEC_INT        16
+#define SD0_INT            15
+#define MBX_INT            14
+#define SD1_INT            13
+#define MS_INT_N           12
+#define FLASH_INT          11 /*NAND*/
+#define IIR6_INT           10
+#define IIR5_INT           9
+#define IIR4_INT           8
+#define IIR3_INT           7
+#define WATCH_INT          6
+#define HSTIMER_INT        5
+#define ARCH_TIMER_IRQ     HSTIMER_INT
+#define CAM_INT            4
+#define PRNG_INT           3
+#define CRYPTO_INT         2
+#define SUB2_IRQ_N         1	/*active low */
+#define SUB1_IRQ_N         0	/*active low */
+
+#define PNX4008_IRQ_TYPES \
+{                                           /*IRQ #'s: */         \
+IRQ_TYPE_LEVEL_LOW,  IRQ_TYPE_LEVEL_LOW,  IRQ_TYPE_LEVEL_LOW,  IRQ_TYPE_LEVEL_HIGH, /*  0, 1, 2, 3 */     \
+IRQ_TYPE_LEVEL_LOW,  IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /*  4, 5, 6, 7 */     \
+IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /*  8, 9,10,11 */     \
+IRQ_TYPE_LEVEL_LOW,  IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /* 12,13,14,15 */     \
+IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /* 16,17,18,19 */     \
+IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /* 20,21,22,23 */     \
+IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /* 24,25,26,27 */     \
+IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_LOW,  IRQ_TYPE_LEVEL_LOW,  /* 28,29,30,31 */     \
+IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_LOW,  IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /* 32,33,34,35 */     \
+IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_EDGE_FALLING, IRQ_TYPE_LEVEL_HIGH, /* 36,37,38,39 */  \
+IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /* 40,41,42,43 */     \
+IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /* 44,45,46,47 */     \
+IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_LOW,  IRQ_TYPE_LEVEL_LOW,  /* 48,49,50,51 */     \
+IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /* 52,53,54,55 */     \
+IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_LOW,  IRQ_TYPE_LEVEL_HIGH, /* 56,57,58,59 */     \
+IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /* 60,61,62,63 */     \
+IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /* 64,65,66,67 */     \
+IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /* 68,69,70,71 */     \
+IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /* 72,73,74,75 */     \
+IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /* 76,77,78,79 */     \
+IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /* 80,81,82,83 */     \
+IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /* 84,85,86,87 */     \
+IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /* 88,89,90,91 */     \
+IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /* 92,93,94,95 */     \
+}
+
+/* Start Enable Pin Interrupts - table 58 page 66 */
+
+#define SE_PIN_BASE_INT   32
+
+#define SE_U7_RX_INT            63
+#define SE_U7_HCTS_INT          62
+#define SE_BT_CLKREQ_INT        61
+#define SE_U6_IRRX_INT          60
+/*59 unused*/
+#define SE_U5_RX_INT            58
+#define SE_GPI_11_INT           57
+#define SE_U3_RX_INT            56
+#define SE_U2_HCTS_INT          55
+#define SE_U2_RX_INT            54
+#define SE_U1_RX_INT            53
+#define SE_DISP_SYNC_INT        52
+/*51 unused*/
+#define SE_SDIO_INT_N           50
+#define SE_MSDIO_START_INT      49
+#define SE_GPI_06_INT           48
+#define SE_GPI_05_INT           47
+#define SE_GPI_04_INT           46
+#define SE_GPI_03_INT           45
+#define SE_GPI_02_INT           44
+#define SE_GPI_01_INT           43
+#define SE_GPI_00_INT           42
+#define SE_SYSCLKEN_PIN_INT     41
+#define SE_SPI1_DATAIN_INT      40
+#define SE_GPI_07_INT           39
+#define SE_SPI2_DATAIN_INT      38
+#define SE_GPI_10_INT           37
+#define SE_GPI_09_INT           36
+#define SE_GPI_08_INT           35
+/*34-32 unused*/
+
+/* Start Enable Internal Interrupts - table 57 page 65 */
+
+#define SE_INT_BASE_INT   0
+
+#define SE_TS_IRQ               31
+#define SE_TS_P_INT             30
+#define SE_TS_AUX_INT           29
+/*27-28 unused*/
+#define SE_USB_AHB_NEED_CLK_INT 26
+#define SE_MSTIMER_INT          25
+#define SE_RTC_INT              24
+#define SE_USB_NEED_CLK_INT     23
+#define SE_USB_INT              22
+#define SE_USB_I2C_INT          21
+#define SE_USB_OTG_TIMER_INT    20
+
+#endif /* __PNX4008_IRQS_h__ */
diff --git a/arch/arm/mach-pnx4008/include/mach/memory.h b/arch/arm/mach-pnx4008/include/mach/memory.h
new file mode 100644
index 000000000000..5789a2d16f5a
--- /dev/null
+++ b/arch/arm/mach-pnx4008/include/mach/memory.h
@@ -0,0 +1,24 @@
+/*
+ * arch/arm/mach-pnx4008/include/mach/memory.h
+ *
+ * Copyright (c) 2005 Philips Semiconductors
+ * Copyright (c) 2005 MontaVista Software, Inc.
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ */
+
+#ifndef __ASM_ARCH_MEMORY_H
+#define __ASM_ARCH_MEMORY_H
+
+/*
+ * Physical DRAM offset.
+ */
+#define PHYS_OFFSET     (0x80000000)
+
+#define __virt_to_bus(x) ((x) - PAGE_OFFSET + PHYS_OFFSET)
+#define __bus_to_virt(x) ((x) + PAGE_OFFSET - PHYS_OFFSET)
+
+#endif
diff --git a/arch/arm/mach-pnx4008/include/mach/param.h b/arch/arm/mach-pnx4008/include/mach/param.h
new file mode 100644
index 000000000000..6ea02f2176b7
--- /dev/null
+++ b/arch/arm/mach-pnx4008/include/mach/param.h
@@ -0,0 +1,21 @@
+/*
+ *  arch/arm/mach-pnx4008/include/mach/param.h
+ *
+ *  Copyright (C) 1999 ARM Limited
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#define HZ 100
diff --git a/arch/arm/mach-pnx4008/include/mach/platform.h b/arch/arm/mach-pnx4008/include/mach/platform.h
new file mode 100644
index 000000000000..368c2c10a308
--- /dev/null
+++ b/arch/arm/mach-pnx4008/include/mach/platform.h
@@ -0,0 +1,69 @@
+/*
+ * arch/arm/mach-pnx4008/include/mach/platform.h
+ *
+ * PNX4008 Base addresses - header file
+ *
+ * Author: Dmitry Chigirev <source@mvista.com>
+ *
+ * Based on reference code received from Philips:
+ * Copyright (C) 2003 Philips Semiconductors
+ *
+ * 2005 (c) MontaVista Software, Inc. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+
+
+#ifndef __ASM_ARCH_PLATFORM_H__
+#define __ASM_ARCH_PLATFORM_H__
+
+#define PNX4008_IRAM_BASE		0x08000000
+#define PNX4008_IRAM_SIZE		0x00010000
+#define PNX4008_YUV_SLAVE_BASE		0x10000000
+#define PNX4008_DUM_SLAVE_BASE		0x18000000
+#define PNX4008_NDF_FLASH_BASE		0x20020000
+#define PNX4008_SPI1_BASE		0x20088000
+#define PNX4008_SPI2_BASE		0x20090000
+#define PNX4008_SD_CONFIG_BASE		0x20098000
+#define PNX4008_FLASH_DATA		0x200B0000
+#define PNX4008_MLC_FLASH_BASE		0x200B8000
+#define PNX4008_JPEG_CONFIG_BASE	0x300A0000
+#define PNX4008_DMA_CONFIG_BASE		0x31000000
+#define PNX4008_USB_CONFIG_BASE		0x31020000
+#define PNX4008_SDRAM_CFG_BASE		0x31080000
+#define PNX4008_AHB2FAB_BASE		0x40000000
+#define PNX4008_PWRMAN_BASE		0x40004000
+#define PNX4008_INTCTRLMIC_BASE		0x40008000
+#define PNX4008_INTCTRLSIC1_BASE	0x4000C000
+#define PNX4008_INTCTRLSIC2_BASE	0x40010000
+#define PNX4008_HSUART1_BASE		0x40014000
+#define PNX4008_HSUART2_BASE		0x40018000
+#define PNX4008_HSUART7_BASE		0x4001C000
+#define PNX4008_RTC_BASE		0x40024000
+#define PNX4008_PIO_BASE		0x40028000
+#define PNX4008_MSTIMER_BASE		0x40034000
+#define PNX4008_HSTIMER_BASE		0x40038000
+#define PNX4008_WDOG_BASE		0x4003C000
+#define PNX4008_DEBUG_BASE		0x40040000
+#define PNX4008_TOUCH1_BASE		0x40048000
+#define PNX4008_KEYSCAN_BASE		0x40050000
+#define PNX4008_UARTCTRL_BASE		0x40054000
+#define PNX4008_PWM_BASE		0x4005C000
+#define PNX4008_UART3_BASE		0x40080000
+#define PNX4008_UART4_BASE		0x40088000
+#define PNX4008_UART5_BASE		0x40090000
+#define PNX4008_UART6_BASE		0x40098000
+#define PNX4008_I2C1_BASE		0x400A0000
+#define PNX4008_I2C2_BASE		0x400A8000
+#define PNX4008_MAGICGATE_BASE		0x400B0000
+#define PNX4008_DUMCONF_BASE		0x400B8000
+#define PNX4008_DUM_MAINCFG_BASE       	0x400BC000
+#define PNX4008_DSP_BASE		0x400C0000
+#define PNX4008_PROFCOUNTER_BASE	0x400C8000
+#define PNX4008_CRYPTO_BASE		0x400D0000
+#define PNX4008_CAMIFCONF_BASE		0x400D8000
+#define PNX4008_YUV2RGB_BASE		0x400E0000
+#define PNX4008_AUDIOCONFIG_BASE	0x400E8000
+
+#endif
diff --git a/arch/arm/mach-pnx4008/include/mach/pm.h b/arch/arm/mach-pnx4008/include/mach/pm.h
new file mode 100644
index 000000000000..2fa685bff858
--- /dev/null
+++ b/arch/arm/mach-pnx4008/include/mach/pm.h
@@ -0,0 +1,33 @@
+/*
+ * arch/arm/mach-pnx4008/include/mach/pm.h
+ *
+ * PNX4008 Power Management Routiness - header file
+ *
+ * Authors: Vitaly Wool, Dmitry Chigirev <source@mvista.com>
+ *
+ * 2005 (c) MontaVista Software, Inc. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+
+#ifndef __ASM_ARCH_PNX4008_PM_H
+#define __ASM_ARCH_PNX4008_PM_H
+
+#ifndef __ASSEMBLER__
+#include "irq.h"
+#include "irqs.h"
+#include "clock.h"
+
+extern void pnx4008_pm_idle(void);
+extern void pnx4008_pm_suspend(void);
+extern unsigned int pnx4008_cpu_suspend_sz;
+extern void pnx4008_cpu_suspend(void);
+extern unsigned int pnx4008_cpu_standby_sz;
+extern void pnx4008_cpu_standby(void);
+
+extern int pnx4008_startup_pll(struct clk *);
+extern int pnx4008_shutdown_pll(struct clk *);
+
+#endif				/* ASSEMBLER */
+#endif				/* __ASM_ARCH_PNX4008_PM_H */
diff --git a/arch/arm/mach-pnx4008/include/mach/system.h b/arch/arm/mach-pnx4008/include/mach/system.h
new file mode 100644
index 000000000000..8985a4622b8c
--- /dev/null
+++ b/arch/arm/mach-pnx4008/include/mach/system.h
@@ -0,0 +1,38 @@
+/*
+ * arch/arm/mach-pnx4008/include/mach/system.h
+ *
+ * Copyright (C) 2003 Philips Semiconductors
+ * Copyright (C) 2005 MontaVista Software, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#ifndef __ASM_ARCH_SYSTEM_H
+#define __ASM_ARCH_SYSTEM_H
+
+#include <mach/hardware.h>
+#include <asm/io.h>
+#include <mach/platform.h>
+
+static void arch_idle(void)
+{
+	cpu_do_idle();
+}
+
+static inline void arch_reset(char mode)
+{
+	cpu_reset(0);
+}
+
+#endif
diff --git a/arch/arm/mach-pnx4008/include/mach/timex.h b/arch/arm/mach-pnx4008/include/mach/timex.h
new file mode 100644
index 000000000000..956fbd8e977c
--- /dev/null
+++ b/arch/arm/mach-pnx4008/include/mach/timex.h
@@ -0,0 +1,73 @@
+/*
+ * arch/arm/mach-pnx4008/include/mach/timex.h
+ *
+ * PNX4008 timers header file
+ *
+ * Author: Dmitry Chigirev <source@mvista.com>
+ *
+ * 2005 (c) MontaVista Software, Inc. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+
+#ifndef __PNX4008_TIMEX_H
+#define __PNX4008_TIMEX_H
+
+#include <mach/hardware.h>
+#include <asm/io.h>
+
+#define CLOCK_TICK_RATE		1000000
+
+#define TICKS2USECS(x)	(x)
+
+/* MilliSecond Timer - Chapter 21 Page 202 */
+
+#define MSTIM_INT     IO_ADDRESS((PNX4008_MSTIMER_BASE + 0x0))
+#define MSTIM_CTRL    IO_ADDRESS((PNX4008_MSTIMER_BASE + 0x4))
+#define MSTIM_COUNTER IO_ADDRESS((PNX4008_MSTIMER_BASE + 0x8))
+#define MSTIM_MCTRL   IO_ADDRESS((PNX4008_MSTIMER_BASE + 0x14))
+#define MSTIM_MATCH0  IO_ADDRESS((PNX4008_MSTIMER_BASE + 0x18))
+#define MSTIM_MATCH1  IO_ADDRESS((PNX4008_MSTIMER_BASE + 0x1c))
+
+/* High Speed Timer - Chpater 22, Page 205 */
+
+#define HSTIM_INT     IO_ADDRESS((PNX4008_HSTIMER_BASE + 0x0))
+#define HSTIM_CTRL    IO_ADDRESS((PNX4008_HSTIMER_BASE + 0x4))
+#define HSTIM_COUNTER IO_ADDRESS((PNX4008_HSTIMER_BASE + 0x8))
+#define HSTIM_PMATCH  IO_ADDRESS((PNX4008_HSTIMER_BASE + 0xC))
+#define HSTIM_PCOUNT  IO_ADDRESS((PNX4008_HSTIMER_BASE + 0x10))
+#define HSTIM_MCTRL   IO_ADDRESS((PNX4008_HSTIMER_BASE + 0x14))
+#define HSTIM_MATCH0  IO_ADDRESS((PNX4008_HSTIMER_BASE + 0x18))
+#define HSTIM_MATCH1  IO_ADDRESS((PNX4008_HSTIMER_BASE + 0x1c))
+#define HSTIM_MATCH2  IO_ADDRESS((PNX4008_HSTIMER_BASE + 0x20))
+#define HSTIM_CCR     IO_ADDRESS((PNX4008_HSTIMER_BASE + 0x28))
+#define HSTIM_CR0     IO_ADDRESS((PNX4008_HSTIMER_BASE + 0x2C))
+#define HSTIM_CR1     IO_ADDRESS((PNX4008_HSTIMER_BASE + 0x30))
+
+/* IMPORTANT: both timers are UPCOUNTING */
+
+/* xSTIM_MCTRL bit definitions */
+#define MR0_INT        1
+#define RESET_COUNT0   (1<<1)
+#define STOP_COUNT0    (1<<2)
+#define MR1_INT        (1<<3)
+#define RESET_COUNT1   (1<<4)
+#define STOP_COUNT1    (1<<5)
+#define MR2_INT        (1<<6)
+#define RESET_COUNT2   (1<<7)
+#define STOP_COUNT2    (1<<8)
+
+/* xSTIM_CTRL bit definitions */
+#define COUNT_ENAB     1
+#define RESET_COUNT    (1<<1)
+#define DEBUG_EN       (1<<2)
+
+/* xSTIM_INT bit definitions */
+#define MATCH0_INT     1
+#define MATCH1_INT     (1<<1)
+#define MATCH2_INT     (1<<2)
+#define RTC_TICK0      (1<<4)
+#define RTC_TICK1      (1<<5)
+
+#endif
diff --git a/arch/arm/mach-pnx4008/include/mach/uncompress.h b/arch/arm/mach-pnx4008/include/mach/uncompress.h
new file mode 100644
index 000000000000..bb4751ee2539
--- /dev/null
+++ b/arch/arm/mach-pnx4008/include/mach/uncompress.h
@@ -0,0 +1,46 @@
+/*
+ *  arch/arm/mach-pnx4008/include/mach/uncompress.h
+ *
+ *  Copyright (C) 1999 ARM Limited
+ *  Copyright (C) 2006 MontaVista Software, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#define UART5_BASE 0x40090000
+
+#define UART5_DR    (*(volatile unsigned char *) (UART5_BASE))
+#define UART5_FR    (*(volatile unsigned char *) (UART5_BASE + 18))
+
+static __inline__ void putc(char c)
+{
+	while (UART5_FR & (1 << 5))
+		barrier();
+
+	UART5_DR = c;
+}
+
+/*
+ * This does not append a newline
+ */
+static inline void flush(void)
+{
+}
+
+/*
+ * nothing to do
+ */
+#define arch_decomp_setup()
+#define arch_decomp_wdog()
diff --git a/arch/arm/mach-pnx4008/include/mach/vmalloc.h b/arch/arm/mach-pnx4008/include/mach/vmalloc.h
new file mode 100644
index 000000000000..2ad398378aed
--- /dev/null
+++ b/arch/arm/mach-pnx4008/include/mach/vmalloc.h
@@ -0,0 +1,20 @@
+/*
+ * arch/arm/mach-pnx4008/include/mach/vmalloc.h
+ *
+ * Author: Vitaly Wool <source@mvista.com>
+ *
+ * 2006 (c) MontaVista Software, Inc. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+
+/*
+ * Just any arbitrary offset to the start of the vmalloc VM area: the
+ * current 8MB value just means that there will be a 8MB "hole" after the
+ * physical memory until the kernel virtual memory starts.  That means that
+ * any out-of-bounds memory accesses will hopefully be caught.
+ * The vmalloc() routines leaves a hole of 4kB between each vmalloced
+ * area for the same reason. ;)
+ */
+#define VMALLOC_END       (PAGE_OFFSET + 0x10000000)
diff --git a/arch/arm/mach-pnx4008/irq.c b/arch/arm/mach-pnx4008/irq.c
index 968d0b027597..5c4f55af5d4b 100644
--- a/arch/arm/mach-pnx4008/irq.c
+++ b/arch/arm/mach-pnx4008/irq.c
@@ -23,17 +23,16 @@
 #include <linux/ioport.h>
 #include <linux/device.h>
 #include <linux/irq.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 #include <asm/setup.h>
-#include <asm/mach-types.h>
 #include <asm/pgtable.h>
 #include <asm/page.h>
 #include <asm/system.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/irq.h>
 #include <asm/mach/map.h>
-#include <asm/arch/irq.h>
+#include <mach/irq.h>
 
 static u8 pnx4008_irq_type[NR_IRQS] = PNX4008_IRQ_TYPES;
 
@@ -56,28 +55,28 @@ static void pnx4008_mask_ack_irq(unsigned int irq)
 static int pnx4008_set_irq_type(unsigned int irq, unsigned int type)
 {
 	switch (type) {
-	case IRQT_RISING:
+	case IRQ_TYPE_EDGE_RISING:
 		__raw_writel(__raw_readl(INTC_ATR(irq)) | INTC_BIT(irq), INTC_ATR(irq));	/*edge sensitive */
 		__raw_writel(__raw_readl(INTC_APR(irq)) | INTC_BIT(irq), INTC_APR(irq));	/*rising edge */
 		set_irq_handler(irq, handle_edge_irq);
 		break;
-	case IRQT_FALLING:
+	case IRQ_TYPE_EDGE_FALLING:
 		__raw_writel(__raw_readl(INTC_ATR(irq)) | INTC_BIT(irq), INTC_ATR(irq));	/*edge sensitive */
 		__raw_writel(__raw_readl(INTC_APR(irq)) & ~INTC_BIT(irq), INTC_APR(irq));	/*falling edge */
 		set_irq_handler(irq, handle_edge_irq);
 		break;
-	case IRQT_LOW:
+	case IRQ_TYPE_LEVEL_LOW:
 		__raw_writel(__raw_readl(INTC_ATR(irq)) & ~INTC_BIT(irq), INTC_ATR(irq));	/*level sensitive */
 		__raw_writel(__raw_readl(INTC_APR(irq)) & ~INTC_BIT(irq), INTC_APR(irq));	/*low level */
 		set_irq_handler(irq, handle_level_irq);
 		break;
-	case IRQT_HIGH:
+	case IRQ_TYPE_LEVEL_HIGH:
 		__raw_writel(__raw_readl(INTC_ATR(irq)) & ~INTC_BIT(irq), INTC_ATR(irq));	/*level sensitive */
 		__raw_writel(__raw_readl(INTC_APR(irq)) | INTC_BIT(irq), INTC_APR(irq));	/* high level */
 		set_irq_handler(irq, handle_level_irq);
 		break;
 
-	/* IRQT_BOTHEDGE is not supported */
+	/* IRQ_TYPE_EDGE_BOTH is not supported */
 	default:
 		printk(KERN_ERR "PNX4008 IRQ: Unsupported irq type %d\n", type);
 		return -1;
diff --git a/arch/arm/mach-pnx4008/pm.c b/arch/arm/mach-pnx4008/pm.c
index 40116d254349..f970906d8848 100644
--- a/arch/arm/mach-pnx4008/pm.c
+++ b/arch/arm/mach-pnx4008/pm.c
@@ -20,10 +20,9 @@
 #include <linux/clk.h>
 
 #include <asm/io.h>
-#include <asm/mach-types.h>
 #include <asm/cacheflush.h>
-#include <asm/arch/pm.h>
-#include <asm/arch/clock.h>
+#include <mach/pm.h>
+#include <mach/clock.h>
 
 #define SRAM_VA IO_ADDRESS(PNX4008_IRAM_BASE)
 
diff --git a/arch/arm/mach-pnx4008/serial.c b/arch/arm/mach-pnx4008/serial.c
index 95a1b3f964a2..9be84bbb30e8 100644
--- a/arch/arm/mach-pnx4008/serial.c
+++ b/arch/arm/mach-pnx4008/serial.c
@@ -15,14 +15,14 @@
 
 #include <asm/io.h>
 
-#include <asm/arch/platform.h>
-#include <asm/hardware.h>
+#include <mach/platform.h>
+#include <mach/hardware.h>
 
 #include <linux/serial_core.h>
 #include <linux/serial_reg.h>
-#include <asm/arch/gpio.h>
+#include <mach/gpio.h>
 
-#include <asm/arch/clock.h>
+#include <mach/clock.h>
 
 #define UART_3		0
 #define UART_4		1
diff --git a/arch/arm/mach-pnx4008/sleep.S b/arch/arm/mach-pnx4008/sleep.S
index fea1e17a3650..f4eed495d295 100644
--- a/arch/arm/mach-pnx4008/sleep.S
+++ b/arch/arm/mach-pnx4008/sleep.S
@@ -13,7 +13,7 @@
 
 #include <linux/linkage.h>
 #include <asm/assembler.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 
 #define PWRMAN_VA_BASE IO_ADDRESS(PNX4008_PWRMAN_BASE)
 #define PWR_CTRL_REG_OFFS 0x44
diff --git a/arch/arm/mach-pnx4008/time.c b/arch/arm/mach-pnx4008/time.c
index 6d4ca8fc0cb4..180975244f96 100644
--- a/arch/arm/mach-pnx4008/time.c
+++ b/arch/arm/mach-pnx4008/time.c
@@ -24,7 +24,7 @@
 #include <linux/irq.h>
 
 #include <asm/system.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 #include <asm/leds.h>
 #include <asm/mach/time.h>
diff --git a/arch/arm/mach-pxa/akita-ioexp.c b/arch/arm/mach-pxa/akita-ioexp.c
index 254892ac30cd..5c67b188a3ba 100644
--- a/arch/arm/mach-pxa/akita-ioexp.c
+++ b/arch/arm/mach-pxa/akita-ioexp.c
@@ -19,7 +19,7 @@
 #include <linux/i2c.h>
 #include <linux/slab.h>
 #include <linux/workqueue.h>
-#include <asm/arch/akita.h>
+#include <mach/akita.h>
 
 /* MAX7310 Regiser Map */
 #define MAX7310_INPUT    0x00
diff --git a/arch/arm/mach-pxa/clock.c b/arch/arm/mach-pxa/clock.c
index 630063ffa6fc..ca8e20538157 100644
--- a/arch/arm/mach-pxa/clock.c
+++ b/arch/arm/mach-pxa/clock.c
@@ -12,9 +12,9 @@
 #include <linux/platform_device.h>
 #include <linux/delay.h>
 
-#include <asm/arch/pxa2xx-regs.h>
-#include <asm/arch/pxa2xx-gpio.h>
-#include <asm/hardware.h>
+#include <mach/pxa2xx-regs.h>
+#include <mach/pxa2xx-gpio.h>
+#include <mach/hardware.h>
 
 #include "devices.h"
 #include "generic.h"
@@ -125,3 +125,28 @@ void clks_register(struct clk *clks, size_t num)
 		list_add(&clks[i].node, &clocks);
 	mutex_unlock(&clocks_mutex);
 }
+
+int clk_add_alias(char *alias, struct device *alias_dev, char *id,
+	struct device *dev)
+{
+	struct clk *r = clk_lookup(dev, id);
+	struct clk *new;
+
+	if (!r)
+		return -ENODEV;
+
+	new = kzalloc(sizeof(struct clk), GFP_KERNEL);
+
+	if (!new)
+		return -ENOMEM;
+
+	new->name = alias;
+	new->dev = alias_dev;
+	new->other = r;
+
+	mutex_lock(&clocks_mutex);
+	list_add(&new->node, &clocks);
+	mutex_unlock(&clocks_mutex);
+
+	return 0;
+}
diff --git a/arch/arm/mach-pxa/clock.h b/arch/arm/mach-pxa/clock.h
index 1ec8f9178aaf..73be795fe3bf 100644
--- a/arch/arm/mach-pxa/clock.h
+++ b/arch/arm/mach-pxa/clock.h
@@ -1,3 +1,5 @@
+#include <linux/list.h>
+
 struct clk;
 
 struct clkops {
@@ -86,3 +88,6 @@ extern void clk_pxa3xx_cken_disable(struct clk *);
 #endif
 
 void clks_register(struct clk *clks, size_t num);
+int clk_add_alias(char *alias, struct device *alias_dev, char *id,
+	struct device *dev);
+
diff --git a/arch/arm/mach-pxa/cm-x270-pci.c b/arch/arm/mach-pxa/cm-x270-pci.c
index bcf0cde6ccc9..2d5bcea1e520 100644
--- a/arch/arm/mach-pxa/cm-x270-pci.c
+++ b/arch/arm/mach-pxa/cm-x270-pci.c
@@ -22,7 +22,7 @@
 #include <linux/gpio.h>
 
 #include <asm/mach/pci.h>
-#include <asm/arch/pxa-regs.h>
+#include <mach/pxa-regs.h>
 #include <asm/mach-types.h>
 
 #include <asm/hardware/it8152.h>
@@ -71,7 +71,7 @@ void __cmx270_pci_init_irq(int irq_gpio)
 
 	cmx270_it8152_irq_gpio = irq_gpio;
 
-	set_irq_type(gpio_to_irq(irq_gpio), IRQT_RISING);
+	set_irq_type(gpio_to_irq(irq_gpio), IRQ_TYPE_EDGE_RISING);
 
 	set_irq_chained_handler(gpio_to_irq(irq_gpio), cmx270_it8152_irq_demux);
 }
diff --git a/arch/arm/mach-pxa/cm-x270.c b/arch/arm/mach-pxa/cm-x270.c
index 402e807eae54..af003a269534 100644
--- a/arch/arm/mach-pxa/cm-x270.c
+++ b/arch/arm/mach-pxa/cm-x270.c
@@ -23,14 +23,14 @@
 #include <asm/mach-types.h>
 #include <asm/mach/map.h>
 
-#include <asm/arch/pxa2xx-regs.h>
-#include <asm/arch/mfp-pxa27x.h>
-#include <asm/arch/pxa-regs.h>
-#include <asm/arch/audio.h>
-#include <asm/arch/pxafb.h>
-#include <asm/arch/ohci.h>
-#include <asm/arch/mmc.h>
-#include <asm/arch/bitfield.h>
+#include <mach/pxa2xx-regs.h>
+#include <mach/mfp-pxa27x.h>
+#include <mach/pxa-regs.h>
+#include <mach/audio.h>
+#include <mach/pxafb.h>
+#include <mach/ohci.h>
+#include <mach/mmc.h>
+#include <mach/bitfield.h>
 
 #include <asm/hardware/it8152.h>
 
diff --git a/arch/arm/mach-pxa/colibri.c b/arch/arm/mach-pxa/colibri.c
index 574839d7c132..abce13c846c5 100644
--- a/arch/arm/mach-pxa/colibri.c
+++ b/arch/arm/mach-pxa/colibri.c
@@ -21,16 +21,16 @@
 #include <linux/mtd/partitions.h>
 #include <linux/mtd/physmap.h>
 #include <asm/mach-types.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/irq.h>
 #include <asm/sizes.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 #include <asm/mach/flash.h>
-#include <asm/arch/pxa-regs.h>
-#include <asm/arch/pxa2xx-gpio.h>
-#include <asm/arch/colibri.h>
+#include <mach/pxa-regs.h>
+#include <mach/pxa2xx-gpio.h>
+#include <mach/colibri.h>
 
 #include "generic.h"
 #include "devices.h"
diff --git a/arch/arm/mach-pxa/corgi.c b/arch/arm/mach-pxa/corgi.c
index e58504edb140..e703a8d209e2 100644
--- a/arch/arm/mach-pxa/corgi.c
+++ b/arch/arm/mach-pxa/corgi.c
@@ -26,7 +26,7 @@
 #include <asm/setup.h>
 #include <asm/memory.h>
 #include <asm/mach-types.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/irq.h>
 #include <asm/io.h>
 #include <asm/system.h>
@@ -35,14 +35,15 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
-#include <asm/arch/pxa-regs.h>
-#include <asm/arch/pxa2xx-regs.h>
-#include <asm/arch/pxa2xx-gpio.h>
-#include <asm/arch/irda.h>
-#include <asm/arch/mmc.h>
-#include <asm/arch/udc.h>
-#include <asm/arch/corgi.h>
-#include <asm/arch/sharpsl.h>
+#include <mach/pxa-regs.h>
+#include <mach/pxa2xx-regs.h>
+#include <mach/pxa2xx-gpio.h>
+#include <mach/i2c.h>
+#include <mach/irda.h>
+#include <mach/mmc.h>
+#include <mach/udc.h>
+#include <mach/corgi.h>
+#include <mach/sharpsl.h>
 
 #include <asm/mach/sharpsl_param.h>
 #include <asm/hardware/scoop.h>
@@ -532,6 +533,7 @@ static void __init corgi_init(void)
  	pxa_set_udc_info(&udc_info);
 	pxa_set_mci_info(&corgi_mci_platform_data);
 	pxa_set_ficp_info(&corgi_ficp_platform_data);
+	pxa_set_i2c_info(NULL);
 
 	platform_scoop_config = &corgi_pcmcia_config;
 
diff --git a/arch/arm/mach-pxa/corgi_lcd.c b/arch/arm/mach-pxa/corgi_lcd.c
index 9328df37afd1..311baf149b07 100644
--- a/arch/arm/mach-pxa/corgi_lcd.c
+++ b/arch/arm/mach-pxa/corgi_lcd.c
@@ -20,12 +20,12 @@
 #include <linux/platform_device.h>
 #include <linux/module.h>
 #include <linux/string.h>
-#include <asm/arch/akita.h>
-#include <asm/arch/corgi.h>
-#include <asm/hardware.h>
-#include <asm/arch/pxa-regs.h>
-#include <asm/arch/sharpsl.h>
-#include <asm/arch/spitz.h>
+#include <mach/akita.h>
+#include <mach/corgi.h>
+#include <mach/hardware.h>
+#include <mach/pxa-regs.h>
+#include <mach/sharpsl.h>
+#include <mach/spitz.h>
 #include <asm/hardware/scoop.h>
 #include <asm/mach/sharpsl_param.h>
 #include "generic.h"
diff --git a/arch/arm/mach-pxa/corgi_pm.c b/arch/arm/mach-pxa/corgi_pm.c
index e91c0f26c412..35bbfccd2df3 100644
--- a/arch/arm/mach-pxa/corgi_pm.c
+++ b/arch/arm/mach-pxa/corgi_pm.c
@@ -20,14 +20,14 @@
 
 #include <asm/irq.h>
 #include <asm/mach-types.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/hardware/scoop.h>
 
-#include <asm/arch/sharpsl.h>
-#include <asm/arch/corgi.h>
-#include <asm/arch/pxa-regs.h>
-#include <asm/arch/pxa2xx-regs.h>
-#include <asm/arch/pxa2xx-gpio.h>
+#include <mach/sharpsl.h>
+#include <mach/corgi.h>
+#include <mach/pxa-regs.h>
+#include <mach/pxa2xx-regs.h>
+#include <mach/pxa2xx-gpio.h>
 #include "sharpsl.h"
 
 #define SHARPSL_CHARGE_ON_VOLT         0x99  /* 2.9V */
diff --git a/arch/arm/mach-pxa/corgi_ssp.c b/arch/arm/mach-pxa/corgi_ssp.c
index eccc45d21f75..8e2f2215c4ba 100644
--- a/arch/arm/mach-pxa/corgi_ssp.c
+++ b/arch/arm/mach-pxa/corgi_ssp.c
@@ -16,13 +16,13 @@
 #include <linux/slab.h>
 #include <linux/delay.h>
 #include <linux/platform_device.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/mach-types.h>
 
-#include <asm/arch/ssp.h>
-#include <asm/arch/pxa-regs.h>
-#include <asm/arch/pxa2xx-gpio.h>
-#include <asm/arch/regs-ssp.h>
+#include <mach/ssp.h>
+#include <mach/pxa-regs.h>
+#include <mach/pxa2xx-gpio.h>
+#include <mach/regs-ssp.h>
 #include "sharpsl.h"
 
 static DEFINE_SPINLOCK(corgi_ssp_lock);
diff --git a/arch/arm/mach-pxa/cpu-pxa.c b/arch/arm/mach-pxa/cpu-pxa.c
index fb9ba1ab2826..6f5569bac131 100644
--- a/arch/arm/mach-pxa/cpu-pxa.c
+++ b/arch/arm/mach-pxa/cpu-pxa.c
@@ -37,9 +37,9 @@
 #include <linux/init.h>
 #include <linux/cpufreq.h>
 
-#include <asm/hardware.h>
-#include <asm/arch/pxa-regs.h>
-#include <asm/arch/pxa2xx-regs.h>
+#include <mach/hardware.h>
+#include <mach/pxa-regs.h>
+#include <mach/pxa2xx-regs.h>
 
 #ifdef DEBUG
 static unsigned int freq_debug;
diff --git a/arch/arm/mach-pxa/devices.c b/arch/arm/mach-pxa/devices.c
index 84489dc51d81..35736fc08634 100644
--- a/arch/arm/mach-pxa/devices.c
+++ b/arch/arm/mach-pxa/devices.c
@@ -4,19 +4,19 @@
 #include <linux/platform_device.h>
 #include <linux/dma-mapping.h>
 
-#include <asm/arch/gpio.h>
-#include <asm/arch/udc.h>
-#include <asm/arch/pxafb.h>
-#include <asm/arch/mmc.h>
-#include <asm/arch/irda.h>
-#include <asm/arch/i2c.h>
-#include <asm/arch/mfp-pxa27x.h>
-#include <asm/arch/ohci.h>
-#include <asm/arch/pxa27x_keypad.h>
-#include <asm/arch/pxa2xx_spi.h>
-#include <asm/arch/camera.h>
-#include <asm/arch/audio.h>
-#include <asm/arch/pxa3xx_nand.h>
+#include <mach/gpio.h>
+#include <mach/udc.h>
+#include <mach/pxafb.h>
+#include <mach/mmc.h>
+#include <mach/irda.h>
+#include <mach/i2c.h>
+#include <mach/mfp-pxa27x.h>
+#include <mach/ohci.h>
+#include <mach/pxa27x_keypad.h>
+#include <mach/pxa2xx_spi.h>
+#include <mach/camera.h>
+#include <mach/audio.h>
+#include <mach/pxa3xx_nand.h>
 
 #include "devices.h"
 #include "generic.h"
diff --git a/arch/arm/mach-pxa/dma.c b/arch/arm/mach-pxa/dma.c
index 3215316d7b06..c0be17e0ab82 100644
--- a/arch/arm/mach-pxa/dma.c
+++ b/arch/arm/mach-pxa/dma.c
@@ -20,10 +20,10 @@
 
 #include <asm/system.h>
 #include <asm/irq.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/dma.h>
 
-#include <asm/arch/pxa-regs.h>
+#include <mach/pxa-regs.h>
 
 struct dma_channel {
 	char *name;
diff --git a/arch/arm/mach-pxa/e400_lcd.c b/arch/arm/mach-pxa/e400_lcd.c
index 16c023630626..263884165f57 100644
--- a/arch/arm/mach-pxa/e400_lcd.c
+++ b/arch/arm/mach-pxa/e400_lcd.c
@@ -14,8 +14,8 @@
 #include <linux/module.h>
 
 #include <asm/mach-types.h>
-#include <asm/arch/pxa-regs.h>
-#include <asm/arch/pxafb.h>
+#include <mach/pxa-regs.h>
+#include <mach/pxafb.h>
 
 static struct pxafb_mode_info e400_pxafb_mode_info = {
 	.pixclock       = 140703,
diff --git a/arch/arm/mach-pxa/em-x270.c b/arch/arm/mach-pxa/em-x270.c
index e5cc6ca63c75..7a0a681a5847 100644
--- a/arch/arm/mach-pxa/em-x270.c
+++ b/arch/arm/mach-pxa/em-x270.c
@@ -23,14 +23,14 @@
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 
-#include <asm/arch/mfp-pxa27x.h>
-#include <asm/arch/pxa-regs.h>
-#include <asm/arch/pxa27x-udc.h>
-#include <asm/arch/audio.h>
-#include <asm/arch/pxafb.h>
-#include <asm/arch/ohci.h>
-#include <asm/arch/mmc.h>
-#include <asm/arch/pxa27x_keypad.h>
+#include <mach/mfp-pxa27x.h>
+#include <mach/pxa-regs.h>
+#include <mach/pxa27x-udc.h>
+#include <mach/audio.h>
+#include <mach/pxafb.h>
+#include <mach/ohci.h>
+#include <mach/mmc.h>
+#include <mach/pxa27x_keypad.h>
 
 #include "generic.h"
 
diff --git a/arch/arm/mach-pxa/eseries.c b/arch/arm/mach-pxa/eseries.c
index c29b7b21c11b..001a252bd514 100644
--- a/arch/arm/mach-pxa/eseries.c
+++ b/arch/arm/mach-pxa/eseries.c
@@ -10,18 +10,78 @@
  *
  */
 
+#include <linux/kernel.h>
 #include <linux/init.h>
 
 #include <asm/setup.h>
 #include <asm/mach/arch.h>
-#include <asm/arch/hardware.h>
 #include <asm/mach-types.h>
 
+#include <mach/mfp-pxa25x.h>
+#include <mach/hardware.h>
+
 #include "generic.h"
 
+static unsigned long e740_pin_config[] __initdata = {
+	/* Chip selects */
+	GPIO15_nCS_1,   /* CS1 - Flash */
+	GPIO79_nCS_3,   /* CS3 - IMAGEON */
+	GPIO80_nCS_4,   /* CS4 - TMIO */
+
+	/* Clocks */
+	GPIO12_32KHz,
+
+	/* BTUART */
+	GPIO42_BTUART_RXD,
+	GPIO43_BTUART_TXD,
+	GPIO44_BTUART_CTS,
+	GPIO45_GPIO, /* Used by TMIO for #SUSPEND */
+
+	/* PC Card */
+	GPIO8_GPIO,   /* CD0 */
+	GPIO44_GPIO,  /* CD1 */
+	GPIO11_GPIO,  /* IRQ0 */
+	GPIO6_GPIO,   /* IRQ1 */
+	GPIO27_GPIO,  /* RST0 */
+	GPIO24_GPIO,  /* RST1 */
+	GPIO20_GPIO,  /* PWR0 */
+	GPIO23_GPIO,  /* PWR1 */
+	GPIO48_nPOE,
+	GPIO49_nPWE,
+	GPIO50_nPIOR,
+	GPIO51_nPIOW,
+	GPIO52_nPCE_1,
+	GPIO53_nPCE_2,
+	GPIO54_nPSKTSEL,
+	GPIO55_nPREG,
+	GPIO56_nPWAIT,
+	GPIO57_nIOIS16,
+
+	/* wakeup */
+	GPIO0_GPIO | WAKEUP_ON_EDGE_RISE,
+};
+
+static unsigned long e400_pin_config[] __initdata = {
+	/* Chip selects */
+	GPIO15_nCS_1,   /* CS1 - Flash */
+	GPIO80_nCS_4,   /* CS4 - TMIO */
+
+	/* Clocks */
+	GPIO12_32KHz,
+
+	/* BTUART */
+	GPIO42_BTUART_RXD,
+	GPIO43_BTUART_TXD,
+	GPIO44_BTUART_CTS,
+	GPIO45_GPIO, /* Used by TMIO for #SUSPEND */
+
+	/* wakeup */
+	GPIO0_GPIO | WAKEUP_ON_EDGE_RISE,
+};
+
 /* Only e800 has 128MB RAM */
 static void __init eseries_fixup(struct machine_desc *desc,
-                      struct tag *tags, char **cmdline, struct meminfo *mi)
+	struct tag *tags, char **cmdline, struct meminfo *mi)
 {
 	mi->nr_banks=1;
 	mi->bank[0].start = 0xa0000000;
@@ -32,83 +92,95 @@ static void __init eseries_fixup(struct machine_desc *desc,
 		mi->bank[0].size = (64*1024*1024);
 }
 
+static void __init e740_init(void)
+{
+	pxa2xx_mfp_config(ARRAY_AND_SIZE(e740_pin_config));
+}
+
+static void __init e400_init(void)
+{
+	pxa2xx_mfp_config(ARRAY_AND_SIZE(e400_pin_config));
+}
+
 /* e-series machine definitions */
 
 #ifdef CONFIG_MACH_E330
 MACHINE_START(E330, "Toshiba e330")
-        /* Maintainer: Ian Molton (spyro@f2s.com) */
-        .phys_io        = 0x40000000,
-        .io_pg_offst    = (io_p2v(0x40000000) >> 18) & 0xfffc,
-        .boot_params    = 0xa0000100,
-        .map_io         = pxa_map_io,
-        .init_irq       = pxa25x_init_irq,
-        .fixup          = eseries_fixup,
-        .timer = &pxa_timer,
+	/* Maintainer: Ian Molton (spyro@f2s.com) */
+	.phys_io	= 0x40000000,
+	.io_pg_offst	= (io_p2v(0x40000000) >> 18) & 0xfffc,
+	.boot_params	= 0xa0000100,
+	.map_io		= pxa_map_io,
+	.init_irq	= pxa25x_init_irq,
+	.fixup		= eseries_fixup,
+	.timer		= &pxa_timer,
 MACHINE_END
 #endif
 
 #ifdef CONFIG_MACH_E350
 MACHINE_START(E350, "Toshiba e350")
 	/* Maintainer: Ian Molton (spyro@f2s.com) */
-	.phys_io        = 0x40000000,
-	.io_pg_offst    = (io_p2v(0x40000000) >> 18) & 0xfffc,
-	.boot_params    = 0xa0000100,
-	.map_io         = pxa_map_io,
-	.init_irq       = pxa25x_init_irq,
-	.fixup          = eseries_fixup,
-	.timer = &pxa_timer,
+	.phys_io	= 0x40000000,
+	.io_pg_offst	= (io_p2v(0x40000000) >> 18) & 0xfffc,
+	.boot_params	= 0xa0000100,
+	.map_io		= pxa_map_io,
+	.init_irq	= pxa25x_init_irq,
+	.fixup		= eseries_fixup,
+	.timer		= &pxa_timer,
 MACHINE_END
 #endif
 
 #ifdef CONFIG_MACH_E740
 MACHINE_START(E740, "Toshiba e740")
-        /* Maintainer: Ian Molton (spyro@f2s.com) */
-        .phys_io        = 0x40000000,
-        .io_pg_offst    = (io_p2v(0x40000000) >> 18) & 0xfffc,
-        .boot_params    = 0xa0000100,
-        .map_io         = pxa_map_io,
-        .init_irq       = pxa25x_init_irq,
-        .fixup          = eseries_fixup,
-        .timer = &pxa_timer,
+	/* Maintainer: Ian Molton (spyro@f2s.com) */
+	.phys_io	= 0x40000000,
+	.io_pg_offst	= (io_p2v(0x40000000) >> 18) & 0xfffc,
+	.boot_params	= 0xa0000100,
+	.map_io		= pxa_map_io,
+	.init_irq	= pxa25x_init_irq,
+	.fixup		= eseries_fixup,
+	.init_machine	= e740_init,
+	.timer		= &pxa_timer,
 MACHINE_END
 #endif
 
 #ifdef CONFIG_MACH_E750
 MACHINE_START(E750, "Toshiba e750")
-        /* Maintainer: Ian Molton (spyro@f2s.com) */
-        .phys_io        = 0x40000000,
-        .io_pg_offst    = (io_p2v(0x40000000) >> 18) & 0xfffc,
-        .boot_params    = 0xa0000100,
-        .map_io         = pxa_map_io,
-        .init_irq       = pxa25x_init_irq,
-        .fixup          = eseries_fixup,
-        .timer = &pxa_timer,
+	/* Maintainer: Ian Molton (spyro@f2s.com) */
+	.phys_io	= 0x40000000,
+	.io_pg_offst	= (io_p2v(0x40000000) >> 18) & 0xfffc,
+	.boot_params	= 0xa0000100,
+	.map_io		= pxa_map_io,
+	.init_irq	= pxa25x_init_irq,
+	.fixup		= eseries_fixup,
+	.timer		= &pxa_timer,
 MACHINE_END
 #endif
 
 #ifdef CONFIG_MACH_E400
 MACHINE_START(E400, "Toshiba e400")
-        /* Maintainer: Ian Molton (spyro@f2s.com) */
-        .phys_io        = 0x40000000,
-        .io_pg_offst    = (io_p2v(0x40000000) >> 18) & 0xfffc,
-        .boot_params    = 0xa0000100,
-        .map_io         = pxa_map_io,
-        .init_irq       = pxa25x_init_irq,
-        .fixup          = eseries_fixup,
-        .timer = &pxa_timer,
+	/* Maintainer: Ian Molton (spyro@f2s.com) */
+	.phys_io	= 0x40000000,
+	.io_pg_offst	= (io_p2v(0x40000000) >> 18) & 0xfffc,
+	.boot_params	= 0xa0000100,
+	.map_io		= pxa_map_io,
+	.init_irq	= pxa25x_init_irq,
+	.fixup		= eseries_fixup,
+	.init_machine	= e400_init,
+	.timer		= &pxa_timer,
 MACHINE_END
 #endif
 
 #ifdef CONFIG_MACH_E800
 MACHINE_START(E800, "Toshiba e800")
-        /* Maintainer: Ian Molton (spyro@f2s.com) */
-        .phys_io        = 0x40000000,
-        .io_pg_offst    = (io_p2v(0x40000000) >> 18) & 0xfffc,
-        .boot_params    = 0xa0000100,
-        .map_io         = pxa_map_io,
-        .init_irq       = pxa25x_init_irq,
-        .fixup          = eseries_fixup,
-        .timer = &pxa_timer,
+	/* Maintainer: Ian Molton (spyro@f2s.com) */
+	.phys_io	= 0x40000000,
+	.io_pg_offst	= (io_p2v(0x40000000) >> 18) & 0xfffc,
+	.boot_params	= 0xa0000100,
+	.map_io		= pxa_map_io,
+	.init_irq	= pxa25x_init_irq,
+	.fixup		= eseries_fixup,
+	.timer		= &pxa_timer,
 MACHINE_END
 #endif
 
diff --git a/arch/arm/mach-pxa/eseries_udc.c b/arch/arm/mach-pxa/eseries_udc.c
index 362847a10998..d622c04c0d44 100644
--- a/arch/arm/mach-pxa/eseries_udc.c
+++ b/arch/arm/mach-pxa/eseries_udc.c
@@ -14,10 +14,10 @@
 #include <linux/init.h>
 #include <linux/device.h>
 
-#include <asm/arch/udc.h>
-#include <asm/arch/eseries-gpio.h>
-#include <asm/arch/hardware.h>
-#include <asm/arch/pxa-regs.h>
+#include <mach/udc.h>
+#include <mach/eseries-gpio.h>
+#include <mach/hardware.h>
+#include <mach/pxa-regs.h>
 #include <asm/mach/arch.h>
 #include <asm/mach-types.h>
 #include <asm/mach/map.h>
diff --git a/arch/arm/mach-pxa/ezx.c b/arch/arm/mach-pxa/ezx.c
index 0143eed65398..cc3d850cc0b6 100644
--- a/arch/arm/mach-pxa/ezx.c
+++ b/arch/arm/mach-pxa/ezx.c
@@ -18,13 +18,13 @@
 #include <linux/pwm_backlight.h>
 
 #include <asm/setup.h>
-#include <asm/arch/pxafb.h>
-#include <asm/arch/ohci.h>
-#include <asm/arch/i2c.h>
+#include <mach/pxafb.h>
+#include <mach/ohci.h>
+#include <mach/i2c.h>
 
-#include <asm/arch/mfp-pxa27x.h>
-#include <asm/arch/pxa-regs.h>
-#include <asm/arch/pxa2xx-regs.h>
+#include <mach/mfp-pxa27x.h>
+#include <mach/pxa-regs.h>
+#include <mach/pxa2xx-regs.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 
diff --git a/arch/arm/mach-pxa/generic.c b/arch/arm/mach-pxa/generic.c
index ca053226fba0..ceaed0076366 100644
--- a/arch/arm/mach-pxa/generic.c
+++ b/arch/arm/mach-pxa/generic.c
@@ -20,15 +20,25 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/system.h>
 #include <asm/pgtable.h>
 #include <asm/mach/map.h>
 
-#include <asm/arch/pxa-regs.h>
+#include <mach/pxa-regs.h>
+#include <mach/reset.h>
 
 #include "generic.h"
 
+void clear_reset_status(unsigned int mask)
+{
+	if (cpu_is_pxa2xx())
+		pxa2xx_clear_reset_status(mask);
+
+	if (cpu_is_pxa3xx())
+		pxa3xx_clear_reset_status(mask);
+}
+
 /*
  * Get the clock frequency as reflected by CCCR and the turbo flag.
  * We assume these values have been applied via a fcs.
diff --git a/arch/arm/mach-pxa/generic.h b/arch/arm/mach-pxa/generic.h
index 5bb7ae757831..041c048320e4 100644
--- a/arch/arm/mach-pxa/generic.h
+++ b/arch/arm/mach-pxa/generic.h
@@ -47,12 +47,20 @@ extern unsigned pxa27x_get_memclk_frequency_10khz(void);
 #define pxa27x_get_memclk_frequency_10khz()	(0)
 #endif
 
+#if defined(CONFIG_PXA25x) || defined(CONFIG_PXA27x)
+extern void pxa2xx_clear_reset_status(unsigned int);
+#else
+static inline void pxa2xx_clear_reset_status(unsigned int mask) {}
+#endif
+
 #ifdef CONFIG_PXA3xx
 extern unsigned pxa3xx_get_clk_frequency_khz(int);
 extern unsigned pxa3xx_get_memclk_frequency_10khz(void);
+extern void pxa3xx_clear_reset_status(unsigned int);
 #else
 #define pxa3xx_get_clk_frequency_khz(x)		(0)
 #define pxa3xx_get_memclk_frequency_10khz()	(0)
+static inline void pxa3xx_clear_reset_status(unsigned int mask) {}
 #endif
 
 extern struct sysdev_class pxa_irq_sysclass;
diff --git a/arch/arm/mach-pxa/gpio.c b/arch/arm/mach-pxa/gpio.c
index 7d3e16970be0..07acc1b23857 100644
--- a/arch/arm/mach-pxa/gpio.c
+++ b/arch/arm/mach-pxa/gpio.c
@@ -18,10 +18,10 @@
 #include <linux/sysdev.h>
 
 #include <asm/gpio.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
-#include <asm/arch/pxa-regs.h>
-#include <asm/arch/pxa2xx-gpio.h>
+#include <mach/pxa-regs.h>
+#include <mach/pxa2xx-gpio.h>
 
 #include "generic.h"
 
diff --git a/arch/arm/mach-pxa/gumstix.c b/arch/arm/mach-pxa/gumstix.c
index bdf239754037..c0092472fa58 100644
--- a/arch/arm/mach-pxa/gumstix.c
+++ b/arch/arm/mach-pxa/gumstix.c
@@ -26,7 +26,7 @@
 #include <asm/setup.h>
 #include <asm/memory.h>
 #include <asm/mach-types.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/irq.h>
 #include <asm/sizes.h>
 
@@ -34,13 +34,13 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 #include <asm/mach/flash.h>
-#include <asm/arch/mmc.h>
-#include <asm/arch/udc.h>
-#include <asm/arch/gumstix.h>
+#include <mach/mmc.h>
+#include <mach/udc.h>
+#include <mach/gumstix.h>
 
-#include <asm/arch/pxa-regs.h>
-#include <asm/arch/pxa2xx-regs.h>
-#include <asm/arch/pxa2xx-gpio.h>
+#include <mach/pxa-regs.h>
+#include <mach/pxa2xx-regs.h>
+#include <mach/pxa2xx-gpio.h>
 
 #include "generic.h"
 
diff --git a/arch/arm/mach-pxa/idp.c b/arch/arm/mach-pxa/idp.c
index 2637633f9166..5aa0270d5605 100644
--- a/arch/arm/mach-pxa/idp.c
+++ b/arch/arm/mach-pxa/idp.c
@@ -25,18 +25,18 @@
 #include <asm/setup.h>
 #include <asm/memory.h>
 #include <asm/mach-types.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/irq.h>
 
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 
-#include <asm/arch/pxa-regs.h>
-#include <asm/arch/pxa2xx-gpio.h>
-#include <asm/arch/idp.h>
-#include <asm/arch/pxafb.h>
-#include <asm/arch/bitfield.h>
-#include <asm/arch/mmc.h>
+#include <mach/pxa-regs.h>
+#include <mach/pxa2xx-gpio.h>
+#include <mach/idp.h>
+#include <mach/pxafb.h>
+#include <mach/bitfield.h>
+#include <mach/mmc.h>
 
 #include "generic.h"
 #include "devices.h"
diff --git a/include/asm-arm/arch-pxa/akita.h b/arch/arm/mach-pxa/include/mach/akita.h
index 5d8cc1d9cb10..5d8cc1d9cb10 100644
--- a/include/asm-arm/arch-pxa/akita.h
+++ b/arch/arm/mach-pxa/include/mach/akita.h
diff --git a/include/asm-arm/arch-pxa/audio.h b/arch/arm/mach-pxa/include/mach/audio.h
index f82f96dd1053..f82f96dd1053 100644
--- a/include/asm-arm/arch-pxa/audio.h
+++ b/arch/arm/mach-pxa/include/mach/audio.h
diff --git a/include/asm-arm/arch-pxa/bitfield.h b/arch/arm/mach-pxa/include/mach/bitfield.h
index f1f0e3387d9c..f1f0e3387d9c 100644
--- a/include/asm-arm/arch-pxa/bitfield.h
+++ b/arch/arm/mach-pxa/include/mach/bitfield.h
diff --git a/include/asm-arm/arch-pxa/camera.h b/arch/arm/mach-pxa/include/mach/camera.h
index 39516ced8b1f..39516ced8b1f 100644
--- a/include/asm-arm/arch-pxa/camera.h
+++ b/arch/arm/mach-pxa/include/mach/camera.h
diff --git a/include/asm-arm/arch-pxa/colibri.h b/arch/arm/mach-pxa/include/mach/colibri.h
index 2ae373fb5675..2ae373fb5675 100644
--- a/include/asm-arm/arch-pxa/colibri.h
+++ b/arch/arm/mach-pxa/include/mach/colibri.h
diff --git a/include/asm-arm/arch-pxa/corgi.h b/arch/arm/mach-pxa/include/mach/corgi.h
index bf856503baf6..bf856503baf6 100644
--- a/include/asm-arm/arch-pxa/corgi.h
+++ b/arch/arm/mach-pxa/include/mach/corgi.h
diff --git a/arch/arm/mach-pxa/include/mach/debug-macro.S b/arch/arm/mach-pxa/include/mach/debug-macro.S
new file mode 100644
index 000000000000..55d6a175ab19
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/debug-macro.S
@@ -0,0 +1,25 @@
+/* arch/arm/mach-pxa/include/mach/debug-macro.S
+ *
+ * Debugging macro include header
+ *
+ *  Copyright (C) 1994-1999 Russell King
+ *  Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+*/
+
+#include "hardware.h"
+
+		.macro	addruart,rx
+		mrc	p15, 0, \rx, c1, c0
+		tst	\rx, #1			@ MMU enabled?
+		moveq	\rx, #0x40000000		@ physical
+		movne	\rx, #io_p2v(0x40000000)	@ virtual
+		orr	\rx, \rx, #0x00100000
+		.endm
+
+#define UART_SHIFT	2
+#include <asm/hardware/debug-8250.S>
diff --git a/arch/arm/mach-pxa/include/mach/dma.h b/arch/arm/mach-pxa/include/mach/dma.h
new file mode 100644
index 000000000000..955bfe606067
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/dma.h
@@ -0,0 +1,50 @@
+/*
+ *  arch/arm/mach-pxa/include/mach/dma.h
+ *
+ *  Author:	Nicolas Pitre
+ *  Created:	Jun 15, 2001
+ *  Copyright:	MontaVista Software, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __ASM_ARCH_DMA_H
+#define __ASM_ARCH_DMA_H
+
+/*
+ * Descriptor structure for PXA's DMA engine
+ * Note: this structure must always be aligned to a 16-byte boundary.
+ */
+
+typedef struct pxa_dma_desc {
+	volatile u32 ddadr;	/* Points to the next descriptor + flags */
+	volatile u32 dsadr;	/* DSADR value for the current transfer */
+	volatile u32 dtadr;	/* DTADR value for the current transfer */
+	volatile u32 dcmd;	/* DCMD value for the current transfer */
+} pxa_dma_desc;
+
+typedef enum {
+	DMA_PRIO_HIGH = 0,
+	DMA_PRIO_MEDIUM = 1,
+	DMA_PRIO_LOW = 2
+} pxa_dma_prio;
+
+#if defined(CONFIG_MACH_ARMCORE) && defined(CONFIG_PCI)
+#define HAVE_ARCH_PCI_SET_DMA_MASK	1
+#endif
+
+/*
+ * DMA registration
+ */
+
+int __init pxa_init_dma(int num_ch);
+
+int pxa_request_dma (char *name,
+			 pxa_dma_prio prio,
+			 void (*irq_handler)(int, void *),
+			 void *data);
+
+void pxa_free_dma (int dma_ch);
+
+#endif /* _ASM_ARCH_DMA_H */
diff --git a/arch/arm/mach-pxa/include/mach/entry-macro.S b/arch/arm/mach-pxa/include/mach/entry-macro.S
new file mode 100644
index 000000000000..de16c12d5232
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/entry-macro.S
@@ -0,0 +1,57 @@
+/*
+ * arch/arm/mach-pxa/include/mach/entry-macro.S
+ *
+ * Low-level IRQ helper macros for PXA-based platforms
+ *
+ * This file is licensed under  the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+#include <mach/hardware.h>
+#include <mach/irqs.h>
+
+		.macro	disable_fiq
+		.endm
+
+		.macro  get_irqnr_preamble, base, tmp
+		.endm
+
+		.macro  arch_ret_to_user, tmp1, tmp2
+		.endm
+
+		.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
+		mrc	p15, 0, \tmp, c0, c0, 0		@ CPUID
+		mov	\tmp, \tmp, lsr #13
+		and	\tmp, \tmp, #0x7		@ Core G
+		cmp	\tmp, #1
+		bhi	1004f
+
+		mov	\base, #io_p2v(0x40000000)	@ IIR Ctl = 0x40d00000
+		add	\base, \base, #0x00d00000
+		ldr	\irqstat, [\base, #0]		@ ICIP
+		ldr	\irqnr, [\base, #4]		@ ICMR
+		b	1002f
+
+1004:
+		mrc	p6, 0, \irqstat, c6, c0, 0	@ ICIP2
+		mrc	p6, 0, \irqnr, c7, c0, 0	@ ICMR2
+		ands	\irqnr, \irqstat, \irqnr
+		beq	1003f
+		rsb	\irqstat, \irqnr, #0
+		and	\irqstat, \irqstat, \irqnr
+		clz	\irqnr, \irqstat
+		rsb	\irqnr, \irqnr, #31
+		add	\irqnr, \irqnr, #32
+		b	1001f
+1003:
+		mrc	p6, 0, \irqstat, c0, c0, 0	@ ICIP
+		mrc	p6, 0, \irqnr, c1, c0, 0	@ ICMR
+1002:
+		ands	\irqnr, \irqstat, \irqnr
+		beq	1001f
+		rsb	\irqstat, \irqnr, #0
+		and	\irqstat, \irqstat, \irqnr
+		clz	\irqnr, \irqstat
+		rsb	\irqnr, \irqnr, #31
+1001:
+		.endm
diff --git a/include/asm-arm/arch-pxa/eseries-gpio.h b/arch/arm/mach-pxa/include/mach/eseries-gpio.h
index 4c90b1310270..4c90b1310270 100644
--- a/include/asm-arm/arch-pxa/eseries-gpio.h
+++ b/arch/arm/mach-pxa/include/mach/eseries-gpio.h
diff --git a/include/asm-arm/arch-pxa/eseries-irq.h b/arch/arm/mach-pxa/include/mach/eseries-irq.h
index f2a93d5e31d3..f2a93d5e31d3 100644
--- a/include/asm-arm/arch-pxa/eseries-irq.h
+++ b/arch/arm/mach-pxa/include/mach/eseries-irq.h
diff --git a/arch/arm/mach-pxa/include/mach/gpio.h b/arch/arm/mach-pxa/include/mach/gpio.h
new file mode 100644
index 000000000000..2c538d8c362d
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/gpio.h
@@ -0,0 +1,65 @@
+/*
+ * arch/arm/mach-pxa/include/mach/gpio.h
+ *
+ * PXA GPIO wrappers for arch-neutral GPIO calls
+ *
+ * Written by Philipp Zabel <philipp.zabel@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ */
+
+#ifndef __ASM_ARCH_PXA_GPIO_H
+#define __ASM_ARCH_PXA_GPIO_H
+
+#include <mach/pxa-regs.h>
+#include <asm/irq.h>
+#include <mach/hardware.h>
+
+#include <asm-generic/gpio.h>
+
+
+/* NOTE: some PXAs have fewer on-chip GPIOs (like PXA255, with 85).
+ * Those cases currently cause holes in the GPIO number space.
+ */
+#define NR_BUILTIN_GPIO 128
+
+static inline int gpio_get_value(unsigned gpio)
+{
+	if (__builtin_constant_p(gpio) && (gpio < NR_BUILTIN_GPIO))
+		return GPLR(gpio) & GPIO_bit(gpio);
+	else
+		return __gpio_get_value(gpio);
+}
+
+static inline void gpio_set_value(unsigned gpio, int value)
+{
+	if (__builtin_constant_p(gpio) && (gpio < NR_BUILTIN_GPIO)) {
+		if (value)
+			GPSR(gpio) = GPIO_bit(gpio);
+		else
+			GPCR(gpio) = GPIO_bit(gpio);
+	} else {
+		__gpio_set_value(gpio, value);
+	}
+}
+
+#define gpio_cansleep __gpio_cansleep
+
+#define gpio_to_irq(gpio)	IRQ_GPIO(gpio)
+#define irq_to_gpio(irq)	IRQ_TO_GPIO(irq)
+
+
+#endif
diff --git a/include/asm-arm/arch-pxa/gumstix.h b/arch/arm/mach-pxa/include/mach/gumstix.h
index 6fa85c4f94f8..42ee1956750e 100644
--- a/include/asm-arm/arch-pxa/gumstix.h
+++ b/arch/arm/mach-pxa/include/mach/gumstix.h
@@ -1,5 +1,5 @@
 /*
- *  linux/include/asm-arm/arch-pxa/gumstix.h
+ *  arch/arm/mach-pxa/include/mach/gumstix.h
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
diff --git a/arch/arm/mach-pxa/include/mach/hardware.h b/arch/arm/mach-pxa/include/mach/hardware.h
new file mode 100644
index 000000000000..e89df4d0d239
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/hardware.h
@@ -0,0 +1,235 @@
+/*
+ *  arch/arm/mach-pxa/include/mach/hardware.h
+ *
+ *  Author:	Nicolas Pitre
+ *  Created:	Jun 15, 2001
+ *  Copyright:	MontaVista Software Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_HARDWARE_H
+#define __ASM_ARCH_HARDWARE_H
+
+/*
+ * We requires absolute addresses.
+ */
+#define PCIO_BASE		0
+
+/*
+ * Workarounds for at least 2 errata so far require this.
+ * The mapping is set in mach-pxa/generic.c.
+ */
+#define UNCACHED_PHYS_0		0xff000000
+#define UNCACHED_ADDR		UNCACHED_PHYS_0
+
+/*
+ * Intel PXA2xx internal register mapping:
+ *
+ * 0x40000000 - 0x41ffffff <--> 0xf2000000 - 0xf3ffffff
+ * 0x44000000 - 0x45ffffff <--> 0xf4000000 - 0xf5ffffff
+ * 0x48000000 - 0x49ffffff <--> 0xf6000000 - 0xf7ffffff
+ * 0x4c000000 - 0x4dffffff <--> 0xf8000000 - 0xf9ffffff
+ * 0x50000000 - 0x51ffffff <--> 0xfa000000 - 0xfbffffff
+ * 0x54000000 - 0x55ffffff <--> 0xfc000000 - 0xfdffffff
+ * 0x58000000 - 0x59ffffff <--> 0xfe000000 - 0xffffffff
+ *
+ * Note that not all PXA2xx chips implement all those addresses, and the
+ * kernel only maps the minimum needed range of this mapping.
+ */
+#define io_p2v(x) (0xf2000000 + ((x) & 0x01ffffff) + (((x) & 0x1c000000) >> 1))
+#define io_v2p(x) (0x3c000000 + ((x) & 0x01ffffff) + (((x) & 0x0e000000) << 1))
+
+#ifndef __ASSEMBLY__
+
+# define __REG(x)	(*((volatile u32 *)io_p2v(x)))
+
+/* With indexed regs we don't want to feed the index through io_p2v()
+   especially if it is a variable, otherwise horrible code will result. */
+# define __REG2(x,y)	\
+	(*(volatile u32 *)((u32)&__REG(x) + (y)))
+
+# define __PREG(x)	(io_v2p((u32)&(x)))
+
+#else
+
+# define __REG(x)	io_p2v(x)
+# define __PREG(x)	io_v2p(x)
+
+#endif
+
+#ifndef __ASSEMBLY__
+
+#ifdef CONFIG_PXA25x
+#define __cpu_is_pxa21x(id)				\
+	({						\
+		unsigned int _id = (id) >> 4 & 0xf3f;	\
+		_id == 0x212;				\
+	})
+
+#define __cpu_is_pxa255(id)                             \
+	({                                              \
+		unsigned int _id = (id) >> 4 & 0xfff;   \
+		_id == 0x2d0;                           \
+	 })
+
+#define __cpu_is_pxa25x(id)				\
+	({						\
+		unsigned int _id = (id) >> 4 & 0xfff;	\
+		_id == 0x2d0 || _id == 0x290;		\
+	})
+#else
+#define __cpu_is_pxa21x(id)	(0)
+#define __cpu_is_pxa255(id)	(0)
+#define __cpu_is_pxa25x(id)	(0)
+#endif
+
+#ifdef CONFIG_PXA27x
+#define __cpu_is_pxa27x(id)				\
+	({						\
+		unsigned int _id = (id) >> 4 & 0xfff;	\
+		_id == 0x411;				\
+	})
+#else
+#define __cpu_is_pxa27x(id)	(0)
+#endif
+
+#ifdef CONFIG_CPU_PXA300
+#define __cpu_is_pxa300(id)				\
+	({						\
+		unsigned int _id = (id) >> 4 & 0xfff;	\
+		_id == 0x688;				\
+	 })
+#else
+#define __cpu_is_pxa300(id)	(0)
+#endif
+
+#ifdef CONFIG_CPU_PXA310
+#define __cpu_is_pxa310(id)				\
+	({						\
+		unsigned int _id = (id) >> 4 & 0xfff;	\
+		_id == 0x689;				\
+	 })
+#else
+#define __cpu_is_pxa310(id)	(0)
+#endif
+
+#ifdef CONFIG_CPU_PXA320
+#define __cpu_is_pxa320(id)				\
+	({						\
+		unsigned int _id = (id) >> 4 & 0xfff;	\
+		_id == 0x603 || _id == 0x682;		\
+	 })
+#else
+#define __cpu_is_pxa320(id)	(0)
+#endif
+
+#ifdef CONFIG_CPU_PXA930
+#define __cpu_is_pxa930(id)				\
+	({						\
+		unsigned int _id = (id) >> 4 & 0xfff;	\
+		_id == 0x683;		\
+	 })
+#else
+#define __cpu_is_pxa930(id)	(0)
+#endif
+
+#define cpu_is_pxa21x()					\
+	({						\
+		__cpu_is_pxa21x(read_cpuid_id());	\
+	})
+
+#define cpu_is_pxa255()                                 \
+	({                                              \
+		__cpu_is_pxa255(read_cpuid_id());       \
+	})
+
+#define cpu_is_pxa25x()					\
+	({						\
+		__cpu_is_pxa25x(read_cpuid_id());	\
+	})
+
+#define cpu_is_pxa27x()					\
+	({						\
+		__cpu_is_pxa27x(read_cpuid_id());	\
+	})
+
+#define cpu_is_pxa300()					\
+	({						\
+		__cpu_is_pxa300(read_cpuid_id());	\
+	 })
+
+#define cpu_is_pxa310()					\
+	({						\
+		__cpu_is_pxa310(read_cpuid_id());	\
+	 })
+
+#define cpu_is_pxa320()					\
+	({						\
+		__cpu_is_pxa320(read_cpuid_id());	\
+	 })
+
+#define cpu_is_pxa930()					\
+	({						\
+		unsigned int id = read_cpuid(CPUID_ID);	\
+		__cpu_is_pxa930(id);			\
+	 })
+
+/*
+ * CPUID Core Generation Bit
+ * <= 0x2 for pxa21x/pxa25x/pxa26x/pxa27x
+ * == 0x3 for pxa300/pxa310/pxa320
+ */
+#define __cpu_is_pxa2xx(id)				\
+	({						\
+		unsigned int _id = (id) >> 13 & 0x7;	\
+		_id <= 0x2;				\
+	 })
+
+#define __cpu_is_pxa3xx(id)				\
+	({						\
+		unsigned int _id = (id) >> 13 & 0x7;	\
+		_id == 0x3;				\
+	 })
+
+#define cpu_is_pxa2xx()					\
+	({						\
+		__cpu_is_pxa2xx(read_cpuid_id());	\
+	 })
+
+#define cpu_is_pxa3xx()					\
+	({						\
+		__cpu_is_pxa3xx(read_cpuid_id());	\
+	 })
+
+/*
+ * Handy routine to set GPIO alternate functions
+ */
+extern int pxa_gpio_mode( int gpio_mode );
+
+/*
+ * Return GPIO level, nonzero means high, zero is low
+ */
+extern int pxa_gpio_get_value(unsigned gpio);
+
+/*
+ * Set output GPIO level
+ */
+extern void pxa_gpio_set_value(unsigned gpio, int value);
+
+/*
+ * return current memory and LCD clock frequency in units of 10kHz
+ */
+extern unsigned int get_memclk_frequency_10khz(void);
+
+#endif
+
+#if defined(CONFIG_MACH_ARMCORE) && defined(CONFIG_PCI)
+#define PCIBIOS_MIN_IO		0
+#define PCIBIOS_MIN_MEM		0
+#define pcibios_assign_all_busses()	1
+#endif
+
+#endif  /* _ASM_ARCH_HARDWARE_H */
diff --git a/include/asm-arm/arch-pxa/i2c.h b/arch/arm/mach-pxa/include/mach/i2c.h
index 80596b013443..80596b013443 100644
--- a/include/asm-arm/arch-pxa/i2c.h
+++ b/arch/arm/mach-pxa/include/mach/i2c.h
diff --git a/include/asm-arm/arch-pxa/idp.h b/arch/arm/mach-pxa/include/mach/idp.h
index b6952534a4e1..5eff96fcc944 100644
--- a/include/asm-arm/arch-pxa/idp.h
+++ b/arch/arm/mach-pxa/include/mach/idp.h
@@ -1,5 +1,5 @@
 /*
- *  linux/include/asm-arm/arch-pxa/idp.h
+ *  arch/arm/mach-pxa/include/mach/idp.h
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
@@ -138,18 +138,18 @@
 #define TOUCH_PANEL_IRQ			IRQ_GPIO(5)
 #define IDE_IRQ				IRQ_GPIO(21)
 
-#define TOUCH_PANEL_IRQ_EDGE		IRQT_FALLING
+#define TOUCH_PANEL_IRQ_EDGE		IRQ_TYPE_EDGE_FALLING
 
 #define ETHERNET_IRQ			IRQ_GPIO(4)
-#define ETHERNET_IRQ_EDGE		IRQT_RISING
+#define ETHERNET_IRQ_EDGE		IRQ_TYPE_EDGE_RISING
 
-#define IDE_IRQ_EDGE			IRQT_RISING
+#define IDE_IRQ_EDGE			IRQ_TYPE_EDGE_RISING
 
 #define PCMCIA_S0_CD_VALID		IRQ_GPIO(7)
-#define PCMCIA_S0_CD_VALID_EDGE		IRQT_BOTHEDGE
+#define PCMCIA_S0_CD_VALID_EDGE		IRQ_TYPE_EDGE_BOTH
 
 #define PCMCIA_S1_CD_VALID		IRQ_GPIO(8)
-#define PCMCIA_S1_CD_VALID_EDGE		IRQT_BOTHEDGE
+#define PCMCIA_S1_CD_VALID_EDGE		IRQ_TYPE_EDGE_BOTH
 
 #define PCMCIA_S0_RDYINT		IRQ_GPIO(19)
 #define PCMCIA_S1_RDYINT		IRQ_GPIO(22)
diff --git a/arch/arm/mach-pxa/include/mach/io.h b/arch/arm/mach-pxa/include/mach/io.h
new file mode 100644
index 000000000000..600fd4f76603
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/io.h
@@ -0,0 +1,20 @@
+/*
+ * arch/arm/mach-pxa/include/mach/io.h
+ *
+ * Copied from asm/arch/sa1100/io.h
+ */
+#ifndef __ASM_ARM_ARCH_IO_H
+#define __ASM_ARM_ARCH_IO_H
+
+#include <mach/hardware.h>
+
+#define IO_SPACE_LIMIT 0xffffffff
+
+/*
+ * We don't actually have real ISA nor PCI buses, but there is so many
+ * drivers out there that might just work if we fake them...
+ */
+#define __io(a)			((void __iomem *)(a))
+#define __mem_pci(a)		(a)
+
+#endif
diff --git a/include/asm-arm/arch-pxa/irda.h b/arch/arm/mach-pxa/include/mach/irda.h
index 0a50c3c763df..0a50c3c763df 100644
--- a/include/asm-arm/arch-pxa/irda.h
+++ b/arch/arm/mach-pxa/include/mach/irda.h
diff --git a/arch/arm/mach-pxa/include/mach/irqs.h b/arch/arm/mach-pxa/include/mach/irqs.h
new file mode 100644
index 000000000000..108b5db9b2af
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/irqs.h
@@ -0,0 +1,265 @@
+/*
+ *  arch/arm/mach-pxa/include/mach/irqs.h
+ *
+ *  Author:	Nicolas Pitre
+ *  Created:	Jun 15, 2001
+ *  Copyright:	MontaVista Software Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+
+#define PXA_IRQ(x)	(x)
+
+#if defined(CONFIG_PXA27x) || defined(CONFIG_PXA3xx)
+#define IRQ_SSP3	PXA_IRQ(0)	/* SSP3 service request */
+#define IRQ_MSL		PXA_IRQ(1)	/* MSL Interface interrupt */
+#define IRQ_USBH2	PXA_IRQ(2)	/* USB Host interrupt 1 (OHCI) */
+#define IRQ_USBH1	PXA_IRQ(3)	/* USB Host interrupt 2 (non-OHCI) */
+#define IRQ_KEYPAD	PXA_IRQ(4)	/* Key pad controller */
+#define IRQ_MEMSTK	PXA_IRQ(5)	/* Memory Stick interrupt */
+#define IRQ_PWRI2C	PXA_IRQ(6)	/* Power I2C interrupt */
+#endif
+
+#define IRQ_HWUART	PXA_IRQ(7)	/* HWUART Transmit/Receive/Error (PXA26x) */
+#define IRQ_OST_4_11	PXA_IRQ(7)	/* OS timer 4-11 matches (PXA27x) */
+#define	IRQ_GPIO0	PXA_IRQ(8)	/* GPIO0 Edge Detect */
+#define	IRQ_GPIO1	PXA_IRQ(9)	/* GPIO1 Edge Detect */
+#define	IRQ_GPIO_2_x	PXA_IRQ(10)	/* GPIO[2-x] Edge Detect */
+#define	IRQ_USB		PXA_IRQ(11)	/* USB Service */
+#define	IRQ_PMU		PXA_IRQ(12)	/* Performance Monitoring Unit */
+#define	IRQ_I2S		PXA_IRQ(13)	/* I2S Interrupt */
+#define	IRQ_AC97	PXA_IRQ(14)	/* AC97 Interrupt */
+#define IRQ_ASSP	PXA_IRQ(15)	/* Audio SSP Service Request (PXA25x) */
+#define IRQ_USIM	PXA_IRQ(15)     /* Smart Card interface interrupt (PXA27x) */
+#define IRQ_NSSP	PXA_IRQ(16)	/* Network SSP Service Request (PXA25x) */
+#define IRQ_SSP2	PXA_IRQ(16)	/* SSP2 interrupt (PXA27x) */
+#define	IRQ_LCD		PXA_IRQ(17)	/* LCD Controller Service Request */
+#define	IRQ_I2C		PXA_IRQ(18)	/* I2C Service Request */
+#define	IRQ_ICP		PXA_IRQ(19)	/* ICP Transmit/Receive/Error */
+#define	IRQ_STUART	PXA_IRQ(20)	/* STUART Transmit/Receive/Error */
+#define	IRQ_BTUART	PXA_IRQ(21)	/* BTUART Transmit/Receive/Error */
+#define	IRQ_FFUART	PXA_IRQ(22)	/* FFUART Transmit/Receive/Error*/
+#define	IRQ_MMC		PXA_IRQ(23)	/* MMC Status/Error Detection */
+#define	IRQ_SSP		PXA_IRQ(24)	/* SSP Service Request */
+#define	IRQ_DMA 	PXA_IRQ(25)	/* DMA Channel Service Request */
+#define	IRQ_OST0 	PXA_IRQ(26)	/* OS Timer match 0 */
+#define	IRQ_OST1 	PXA_IRQ(27)	/* OS Timer match 1 */
+#define	IRQ_OST2 	PXA_IRQ(28)	/* OS Timer match 2 */
+#define	IRQ_OST3 	PXA_IRQ(29)	/* OS Timer match 3 */
+#define	IRQ_RTC1Hz	PXA_IRQ(30)	/* RTC HZ Clock Tick */
+#define	IRQ_RTCAlrm	PXA_IRQ(31)	/* RTC Alarm */
+
+#if defined(CONFIG_PXA27x) || defined(CONFIG_PXA3xx)
+#define IRQ_TPM		PXA_IRQ(32)	/* TPM interrupt */
+#define IRQ_CAMERA	PXA_IRQ(33)	/* Camera Interface */
+#endif
+
+#ifdef CONFIG_PXA3xx
+#define IRQ_SSP4	PXA_IRQ(13)	/* SSP4 service request */
+#define IRQ_CIR		PXA_IRQ(34)	/* Consumer IR */
+#define IRQ_TSI		PXA_IRQ(36)	/* Touch Screen Interface (PXA320) */
+#define IRQ_USIM2	PXA_IRQ(38)	/* USIM2 Controller */
+#define IRQ_GRPHICS	PXA_IRQ(39)	/* Graphics Controller */
+#define IRQ_MMC2	PXA_IRQ(41)	/* MMC2 Controller */
+#define IRQ_1WIRE	PXA_IRQ(44)	/* 1-Wire Controller */
+#define IRQ_NAND	PXA_IRQ(45)	/* NAND Controller */
+#define IRQ_USB2	PXA_IRQ(46)	/* USB 2.0 Device Controller */
+#define IRQ_WAKEUP0	PXA_IRQ(49)	/* EXT_WAKEUP0 */
+#define IRQ_WAKEUP1	PXA_IRQ(50)	/* EXT_WAKEUP1 */
+#define IRQ_DMEMC	PXA_IRQ(51)	/* Dynamic Memory Controller */
+#define IRQ_MMC3	PXA_IRQ(55)	/* MMC3 Controller (PXA310) */
+#endif
+
+#define PXA_GPIO_IRQ_BASE	(64)
+#define PXA_GPIO_IRQ_NUM	(128)
+
+#define GPIO_2_x_TO_IRQ(x)	(PXA_GPIO_IRQ_BASE + (x))
+#define IRQ_GPIO(x)	(((x) < 2) ? (IRQ_GPIO0 + (x)) : GPIO_2_x_TO_IRQ(x))
+
+#define IRQ_TO_GPIO_2_x(i)	((i) - PXA_GPIO_IRQ_BASE)
+#define IRQ_TO_GPIO(i)	(((i) < IRQ_GPIO(2)) ? ((i) - IRQ_GPIO0) : IRQ_TO_GPIO_2_x(i))
+
+/*
+ * The next 16 interrupts are for board specific purposes.  Since
+ * the kernel can only run on one machine at a time, we can re-use
+ * these.  If you need more, increase IRQ_BOARD_END, but keep it
+ * within sensible limits.
+ */
+#define IRQ_BOARD_START		(PXA_GPIO_IRQ_BASE + PXA_GPIO_IRQ_NUM)
+#define IRQ_BOARD_END		(IRQ_BOARD_START + 16)
+
+#define IRQ_SA1111_START	(IRQ_BOARD_END)
+#define IRQ_GPAIN0		(IRQ_BOARD_END + 0)
+#define IRQ_GPAIN1		(IRQ_BOARD_END + 1)
+#define IRQ_GPAIN2		(IRQ_BOARD_END + 2)
+#define IRQ_GPAIN3		(IRQ_BOARD_END + 3)
+#define IRQ_GPBIN0		(IRQ_BOARD_END + 4)
+#define IRQ_GPBIN1		(IRQ_BOARD_END + 5)
+#define IRQ_GPBIN2		(IRQ_BOARD_END + 6)
+#define IRQ_GPBIN3		(IRQ_BOARD_END + 7)
+#define IRQ_GPBIN4		(IRQ_BOARD_END + 8)
+#define IRQ_GPBIN5		(IRQ_BOARD_END + 9)
+#define IRQ_GPCIN0		(IRQ_BOARD_END + 10)
+#define IRQ_GPCIN1		(IRQ_BOARD_END + 11)
+#define IRQ_GPCIN2		(IRQ_BOARD_END + 12)
+#define IRQ_GPCIN3		(IRQ_BOARD_END + 13)
+#define IRQ_GPCIN4		(IRQ_BOARD_END + 14)
+#define IRQ_GPCIN5		(IRQ_BOARD_END + 15)
+#define IRQ_GPCIN6		(IRQ_BOARD_END + 16)
+#define IRQ_GPCIN7		(IRQ_BOARD_END + 17)
+#define IRQ_MSTXINT		(IRQ_BOARD_END + 18)
+#define IRQ_MSRXINT		(IRQ_BOARD_END + 19)
+#define IRQ_MSSTOPERRINT	(IRQ_BOARD_END + 20)
+#define IRQ_TPTXINT		(IRQ_BOARD_END + 21)
+#define IRQ_TPRXINT		(IRQ_BOARD_END + 22)
+#define IRQ_TPSTOPERRINT	(IRQ_BOARD_END + 23)
+#define SSPXMTINT		(IRQ_BOARD_END + 24)
+#define SSPRCVINT		(IRQ_BOARD_END + 25)
+#define SSPROR			(IRQ_BOARD_END + 26)
+#define AUDXMTDMADONEA		(IRQ_BOARD_END + 32)
+#define AUDRCVDMADONEA		(IRQ_BOARD_END + 33)
+#define AUDXMTDMADONEB		(IRQ_BOARD_END + 34)
+#define AUDRCVDMADONEB		(IRQ_BOARD_END + 35)
+#define AUDTFSR			(IRQ_BOARD_END + 36)
+#define AUDRFSR			(IRQ_BOARD_END + 37)
+#define AUDTUR			(IRQ_BOARD_END + 38)
+#define AUDROR			(IRQ_BOARD_END + 39)
+#define AUDDTS			(IRQ_BOARD_END + 40)
+#define AUDRDD			(IRQ_BOARD_END + 41)
+#define AUDSTO			(IRQ_BOARD_END + 42)
+#define IRQ_USBPWR		(IRQ_BOARD_END + 43)
+#define IRQ_HCIM		(IRQ_BOARD_END + 44)
+#define IRQ_HCIBUFFACC		(IRQ_BOARD_END + 45)
+#define IRQ_HCIRMTWKP		(IRQ_BOARD_END + 46)
+#define IRQ_NHCIMFCIR		(IRQ_BOARD_END + 47)
+#define IRQ_USB_PORT_RESUME	(IRQ_BOARD_END + 48)
+#define IRQ_S0_READY_NINT	(IRQ_BOARD_END + 49)
+#define IRQ_S1_READY_NINT	(IRQ_BOARD_END + 50)
+#define IRQ_S0_CD_VALID		(IRQ_BOARD_END + 51)
+#define IRQ_S1_CD_VALID		(IRQ_BOARD_END + 52)
+#define IRQ_S0_BVD1_STSCHG	(IRQ_BOARD_END + 53)
+#define IRQ_S1_BVD1_STSCHG	(IRQ_BOARD_END + 54)
+
+#define IRQ_LOCOMO_START	(IRQ_BOARD_END)
+#define IRQ_LOCOMO_KEY		(IRQ_BOARD_END + 0)
+#define IRQ_LOCOMO_GPIO0	(IRQ_BOARD_END + 1)
+#define IRQ_LOCOMO_GPIO1	(IRQ_BOARD_END + 2)
+#define IRQ_LOCOMO_GPIO2	(IRQ_BOARD_END + 3)
+#define IRQ_LOCOMO_GPIO3	(IRQ_BOARD_END + 4)
+#define IRQ_LOCOMO_GPIO4	(IRQ_BOARD_END + 5)
+#define IRQ_LOCOMO_GPIO5	(IRQ_BOARD_END + 6)
+#define IRQ_LOCOMO_GPIO6	(IRQ_BOARD_END + 7)
+#define IRQ_LOCOMO_GPIO7	(IRQ_BOARD_END + 8)
+#define IRQ_LOCOMO_GPIO8	(IRQ_BOARD_END + 9)
+#define IRQ_LOCOMO_GPIO9	(IRQ_BOARD_END + 10)
+#define IRQ_LOCOMO_GPIO10	(IRQ_BOARD_END + 11)
+#define IRQ_LOCOMO_GPIO11	(IRQ_BOARD_END + 12)
+#define IRQ_LOCOMO_GPIO12	(IRQ_BOARD_END + 13)
+#define IRQ_LOCOMO_GPIO13	(IRQ_BOARD_END + 14)
+#define IRQ_LOCOMO_GPIO14	(IRQ_BOARD_END + 15)
+#define IRQ_LOCOMO_GPIO15	(IRQ_BOARD_END + 16)
+#define IRQ_LOCOMO_LT		(IRQ_BOARD_END + 17)
+#define IRQ_LOCOMO_SPI_RFR	(IRQ_BOARD_END + 18)
+#define IRQ_LOCOMO_SPI_RFW	(IRQ_BOARD_END + 19)
+#define IRQ_LOCOMO_SPI_OVRN	(IRQ_BOARD_END + 20)
+#define IRQ_LOCOMO_SPI_TEND	(IRQ_BOARD_END + 21)
+
+/*
+ * Figure out the MAX IRQ number.
+ *
+ * If we have an SA1111, the max IRQ is S1_BVD1_STSCHG+1.
+ * If we have an LoCoMo, the max IRQ is IRQ_LOCOMO_SPI_TEND+1
+ * Otherwise, we have the standard IRQs only.
+ */
+#ifdef CONFIG_SA1111
+#define NR_IRQS			(IRQ_S1_BVD1_STSCHG + 1)
+#elif defined(CONFIG_SHARP_LOCOMO)
+#define NR_IRQS			(IRQ_LOCOMO_SPI_TEND + 1)
+#elif defined(CONFIG_ARCH_LUBBOCK) || \
+      defined(CONFIG_MACH_LOGICPD_PXA270) || \
+      defined(CONFIG_MACH_TOSA) || \
+      defined(CONFIG_MACH_MAINSTONE) || \
+      defined(CONFIG_MACH_PCM027) || \
+      defined(CONFIG_ARCH_PXA_ESERIES) || \
+      defined(CONFIG_MACH_MAGICIAN)
+#define NR_IRQS			(IRQ_BOARD_END)
+#elif defined(CONFIG_MACH_ZYLONITE)
+#define NR_IRQS			(IRQ_BOARD_START + 32)
+#else
+#define NR_IRQS			(IRQ_BOARD_START)
+#endif
+
+/*
+ * Board specific IRQs.  Define them here.
+ * Do not surround them with ifdefs.
+ */
+#define LUBBOCK_IRQ(x)		(IRQ_BOARD_START + (x))
+#define LUBBOCK_SD_IRQ		LUBBOCK_IRQ(0)
+#define LUBBOCK_SA1111_IRQ	LUBBOCK_IRQ(1)
+#define LUBBOCK_USB_IRQ		LUBBOCK_IRQ(2)  /* usb connect */
+#define LUBBOCK_ETH_IRQ		LUBBOCK_IRQ(3)
+#define LUBBOCK_UCB1400_IRQ	LUBBOCK_IRQ(4)
+#define LUBBOCK_BB_IRQ		LUBBOCK_IRQ(5)
+#define LUBBOCK_USB_DISC_IRQ	LUBBOCK_IRQ(6)  /* usb disconnect */
+#define LUBBOCK_LAST_IRQ	LUBBOCK_IRQ(6)
+
+#define LPD270_IRQ(x)		(IRQ_BOARD_START + (x))
+#define LPD270_USBC_IRQ		LPD270_IRQ(2)
+#define LPD270_ETHERNET_IRQ	LPD270_IRQ(3)
+#define LPD270_AC97_IRQ		LPD270_IRQ(4)
+
+#define MAINSTONE_IRQ(x)	(IRQ_BOARD_START + (x))
+#define MAINSTONE_MMC_IRQ	MAINSTONE_IRQ(0)
+#define MAINSTONE_USIM_IRQ	MAINSTONE_IRQ(1)
+#define MAINSTONE_USBC_IRQ	MAINSTONE_IRQ(2)
+#define MAINSTONE_ETHERNET_IRQ	MAINSTONE_IRQ(3)
+#define MAINSTONE_AC97_IRQ	MAINSTONE_IRQ(4)
+#define MAINSTONE_PEN_IRQ	MAINSTONE_IRQ(5)
+#define MAINSTONE_MSINS_IRQ	MAINSTONE_IRQ(6)
+#define MAINSTONE_EXBRD_IRQ	MAINSTONE_IRQ(7)
+#define MAINSTONE_S0_CD_IRQ	MAINSTONE_IRQ(9)
+#define MAINSTONE_S0_STSCHG_IRQ	MAINSTONE_IRQ(10)
+#define MAINSTONE_S0_IRQ	MAINSTONE_IRQ(11)
+#define MAINSTONE_S1_CD_IRQ	MAINSTONE_IRQ(13)
+#define MAINSTONE_S1_STSCHG_IRQ	MAINSTONE_IRQ(14)
+#define MAINSTONE_S1_IRQ	MAINSTONE_IRQ(15)
+
+/* LoCoMo Interrupts (CONFIG_SHARP_LOCOMO) */
+#define IRQ_LOCOMO_KEY_BASE	(IRQ_BOARD_START + 0)
+#define IRQ_LOCOMO_GPIO_BASE	(IRQ_BOARD_START + 1)
+#define IRQ_LOCOMO_LT_BASE	(IRQ_BOARD_START + 2)
+#define IRQ_LOCOMO_SPI_BASE	(IRQ_BOARD_START + 3)
+
+/* phyCORE-PXA270 (PCM027) Interrupts */
+#define PCM027_IRQ(x)          (IRQ_BOARD_START + (x))
+#define PCM027_BTDET_IRQ       PCM027_IRQ(0)
+#define PCM027_FF_RI_IRQ       PCM027_IRQ(1)
+#define PCM027_MMCDET_IRQ      PCM027_IRQ(2)
+#define PCM027_PM_5V_IRQ       PCM027_IRQ(3)
+
+/* ITE8152 irqs */
+/* add IT8152 IRQs beyond BOARD_END */
+#ifdef CONFIG_PCI_HOST_ITE8152
+#define IT8152_IRQ(x)   (IRQ_BOARD_END + (x))
+
+/* IRQ-sources in 3 groups - local devices, LPC (serial), and external PCI */
+#define IT8152_LD_IRQ_COUNT     9
+#define IT8152_LP_IRQ_COUNT     16
+#define IT8152_PD_IRQ_COUNT     15
+
+/* Priorities: */
+#define IT8152_PD_IRQ(i)        IT8152_IRQ(i)
+#define IT8152_LP_IRQ(i)        (IT8152_IRQ(i) + IT8152_PD_IRQ_COUNT)
+#define IT8152_LD_IRQ(i)        (IT8152_IRQ(i) + IT8152_PD_IRQ_COUNT + IT8152_LP_IRQ_COUNT)
+
+#define IT8152_LAST_IRQ         IT8152_LD_IRQ(IT8152_LD_IRQ_COUNT - 1)
+
+#if NR_IRQS < (IT8152_LAST_IRQ+1)
+#undef NR_IRQS
+#define NR_IRQS (IT8152_LAST_IRQ+1)
+#endif
+
+#endif /* CONFIG_PCI_HOST_ITE8152 */
diff --git a/include/asm-arm/arch-pxa/littleton.h b/arch/arm/mach-pxa/include/mach/littleton.h
index 79d209b826f4..79d209b826f4 100644
--- a/include/asm-arm/arch-pxa/littleton.h
+++ b/arch/arm/mach-pxa/include/mach/littleton.h
diff --git a/include/asm-arm/arch-pxa/lpd270.h b/arch/arm/mach-pxa/include/mach/lpd270.h
index 501d240ac120..f89fb715266b 100644
--- a/include/asm-arm/arch-pxa/lpd270.h
+++ b/arch/arm/mach-pxa/include/mach/lpd270.h
@@ -1,5 +1,5 @@
 /*
- * include/asm-arm/arch-pxa/lpd270.h
+ * arch/arm/mach-pxa/include/mach/lpd270.h
  *
  * Author:	Lennert Buytenhek
  * Created:	Feb 10, 2006
diff --git a/include/asm-arm/arch-pxa/lubbock.h b/arch/arm/mach-pxa/include/mach/lubbock.h
index 11ee73593fc3..4cb24154a5a8 100644
--- a/include/asm-arm/arch-pxa/lubbock.h
+++ b/arch/arm/mach-pxa/include/mach/lubbock.h
@@ -1,5 +1,5 @@
 /*
- *  linux/include/asm-arm/arch-pxa/lubbock.h
+ *  arch/arm/mach-pxa/include/mach/lubbock.h
  *
  *  Author:	Nicolas Pitre
  *  Created:	Jun 15, 2001
diff --git a/include/asm-arm/arch-pxa/magician.h b/arch/arm/mach-pxa/include/mach/magician.h
index 169b374f9921..38d68d99f585 100644
--- a/include/asm-arm/arch-pxa/magician.h
+++ b/arch/arm/mach-pxa/include/mach/magician.h
@@ -12,7 +12,7 @@
 #ifndef _MAGICIAN_H_
 #define _MAGICIAN_H_
 
-#include <asm/arch/irqs.h>
+#include <mach/irqs.h>
 
 /*
  * PXA GPIOs
diff --git a/include/asm-arm/arch-pxa/mainstone.h b/arch/arm/mach-pxa/include/mach/mainstone.h
index 14c862adcaa1..3461c4302ff4 100644
--- a/include/asm-arm/arch-pxa/mainstone.h
+++ b/arch/arm/mach-pxa/include/mach/mainstone.h
@@ -1,5 +1,5 @@
 /*
- *  linux/include/asm-arm/arch-pxa/mainstone.h
+ *  arch/arm/mach-pxa/include/mach/mainstone.h
  *
  *  Author:	Nicolas Pitre
  *  Created:	Nov 14, 2002
diff --git a/arch/arm/mach-pxa/include/mach/memory.h b/arch/arm/mach-pxa/include/mach/memory.h
new file mode 100644
index 000000000000..552eb7fa6579
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/memory.h
@@ -0,0 +1,52 @@
+/*
+ *  arch/arm/mach-pxa/include/mach/memory.h
+ *
+ * Author:	Nicolas Pitre
+ * Copyright:	(C) 2001 MontaVista Software Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_MEMORY_H
+#define __ASM_ARCH_MEMORY_H
+
+/*
+ * Physical DRAM offset.
+ */
+#define PHYS_OFFSET	UL(0xa0000000)
+
+/*
+ * Virtual view <-> DMA view memory address translations
+ * virt_to_bus: Used to translate the virtual address to an
+ *		address suitable to be passed to set_dma_addr
+ * bus_to_virt: Used to convert an address for DMA operations
+ *		to an address that the kernel can use.
+ */
+#define __virt_to_bus(x)	 __virt_to_phys(x)
+#define __bus_to_virt(x)	 __phys_to_virt(x)
+
+/*
+ * The nodes are matched with the physical SDRAM banks as follows:
+ *
+ * 	node 0:  0xa0000000-0xa3ffffff	-->  0xc0000000-0xc3ffffff
+ * 	node 1:  0xa4000000-0xa7ffffff	-->  0xc4000000-0xc7ffffff
+ * 	node 2:  0xa8000000-0xabffffff	-->  0xc8000000-0xcbffffff
+ * 	node 3:  0xac000000-0xafffffff	-->  0xcc000000-0xcfffffff
+ *
+ * This needs a node mem size of 26 bits.
+ */
+#define NODE_MEM_SIZE_BITS	26
+
+#if !defined(__ASSEMBLY__) && defined(CONFIG_MACH_ARMCORE) && defined(CONFIG_PCI)
+void cmx270_pci_adjust_zones(int node, unsigned long *size,
+			     unsigned long *holes);
+
+#define arch_adjust_zones(node, size, holes) \
+	cmx270_pci_adjust_zones(node, size, holes)
+
+#define ISA_DMA_THRESHOLD	(PHYS_OFFSET + SZ_64M - 1)
+#endif
+
+#endif
diff --git a/include/asm-arm/arch-pxa/mfp-pxa25x.h b/arch/arm/mach-pxa/include/mach/mfp-pxa25x.h
index 0499323010ba..6c8e72238bfd 100644
--- a/include/asm-arm/arch-pxa/mfp-pxa25x.h
+++ b/arch/arm/mach-pxa/include/mach/mfp-pxa25x.h
@@ -1,8 +1,8 @@
 #ifndef __ASM_ARCH_MFP_PXA25X_H
 #define __ASM_ARCH_MFP_PXA25X_H
 
-#include <asm/arch/mfp.h>
-#include <asm/arch/mfp-pxa2xx.h>
+#include <mach/mfp.h>
+#include <mach/mfp-pxa2xx.h>
 
 /* GPIO */
 #define GPIO2_GPIO		MFP_CFG_IN(GPIO2, AF0)
diff --git a/include/asm-arm/arch-pxa/mfp-pxa27x.h b/arch/arm/mach-pxa/include/mach/mfp-pxa27x.h
index bc73ab84167c..122bdbd53182 100644
--- a/include/asm-arm/arch-pxa/mfp-pxa27x.h
+++ b/arch/arm/mach-pxa/include/mach/mfp-pxa27x.h
@@ -8,8 +8,8 @@
  * specific controller, and this should work in most cases.
  */
 
-#include <asm/arch/mfp.h>
-#include <asm/arch/mfp-pxa2xx.h>
+#include <mach/mfp.h>
+#include <mach/mfp-pxa2xx.h>
 
 /* GPIO */
 #define GPIO85_GPIO		MFP_CFG_IN(GPIO85, AF0)
diff --git a/include/asm-arm/arch-pxa/mfp-pxa2xx.h b/arch/arm/mach-pxa/include/mach/mfp-pxa2xx.h
index 8de1c0dae624..3e9211591e20 100644
--- a/include/asm-arm/arch-pxa/mfp-pxa2xx.h
+++ b/arch/arm/mach-pxa/include/mach/mfp-pxa2xx.h
@@ -1,7 +1,7 @@
 #ifndef __ASM_ARCH_MFP_PXA2XX_H
 #define __ASM_ARCH_MFP_PXA2XX_H
 
-#include <asm/arch/mfp.h>
+#include <mach/mfp.h>
 
 /*
  * the following MFP_xxx bit definitions in mfp.h are re-used for pxa2xx:
diff --git a/include/asm-arm/arch-pxa/mfp-pxa300.h b/arch/arm/mach-pxa/include/mach/mfp-pxa300.h
index bb410313556f..bc1fb33a6e70 100644
--- a/include/asm-arm/arch-pxa/mfp-pxa300.h
+++ b/arch/arm/mach-pxa/include/mach/mfp-pxa300.h
@@ -1,5 +1,5 @@
 /*
- * linux/include/asm-arm/arch-pxa/mfp-pxa300.h
+ * arch/arm/mach-pxa/include/mach/mfp-pxa300.h
  *
  * PXA300/PXA310 specific MFP configuration definitions
  *
@@ -15,8 +15,8 @@
 #ifndef __ASM_ARCH_MFP_PXA300_H
 #define __ASM_ARCH_MFP_PXA300_H
 
-#include <asm/arch/mfp.h>
-#include <asm/arch/mfp-pxa3xx.h>
+#include <mach/mfp.h>
+#include <mach/mfp-pxa3xx.h>
 
 /* GPIO */
 #define GPIO46_GPIO		MFP_CFG(GPIO46, AF1)
diff --git a/include/asm-arm/arch-pxa/mfp-pxa320.h b/arch/arm/mach-pxa/include/mach/mfp-pxa320.h
index 576aa46d90fc..74990510cf34 100644
--- a/include/asm-arm/arch-pxa/mfp-pxa320.h
+++ b/arch/arm/mach-pxa/include/mach/mfp-pxa320.h
@@ -1,5 +1,5 @@
 /*
- * linux/include/asm-arm/arch-pxa/mfp-pxa320.h
+ * arch/arm/mach-pxa/include/mach/mfp-pxa320.h
  *
  * PXA320 specific MFP configuration definitions
  *
@@ -15,8 +15,8 @@
 #ifndef __ASM_ARCH_MFP_PXA320_H
 #define __ASM_ARCH_MFP_PXA320_H
 
-#include <asm/arch/mfp.h>
-#include <asm/arch/mfp-pxa3xx.h>
+#include <mach/mfp.h>
+#include <mach/mfp-pxa3xx.h>
 
 /* GPIO */
 #define GPIO46_GPIO		MFP_CFG(GPIO46, AF0)
diff --git a/include/asm-arm/arch-pxa/mfp-pxa3xx.h b/arch/arm/mach-pxa/include/mach/mfp-pxa3xx.h
index 1f6b35c015d0..1f6b35c015d0 100644
--- a/include/asm-arm/arch-pxa/mfp-pxa3xx.h
+++ b/arch/arm/mach-pxa/include/mach/mfp-pxa3xx.h
diff --git a/include/asm-arm/arch-pxa/mfp-pxa930.h b/arch/arm/mach-pxa/include/mach/mfp-pxa930.h
index c4e945ab1923..fabd9b4df827 100644
--- a/include/asm-arm/arch-pxa/mfp-pxa930.h
+++ b/arch/arm/mach-pxa/include/mach/mfp-pxa930.h
@@ -1,5 +1,5 @@
 /*
- * linux/include/asm-arm/arch-pxa/mfp-pxa930.h
+ * arch/arm/mach-pxa/include/mach/mfp-pxa930.h
  *
  * PXA930 specific MFP configuration definitions
  *
@@ -13,8 +13,8 @@
 #ifndef __ASM_ARCH_MFP_PXA9xx_H
 #define __ASM_ARCH_MFP_PXA9xx_H
 
-#include <asm/arch/mfp.h>
-#include <asm/arch/mfp-pxa3xx.h>
+#include <mach/mfp.h>
+#include <mach/mfp-pxa3xx.h>
 
 /* GPIO */
 #define GPIO46_GPIO		MFP_CFG(GPIO46, AF0)
diff --git a/include/asm-arm/arch-pxa/mfp.h b/arch/arm/mach-pxa/include/mach/mfp.h
index e7d58798da67..8769567b389b 100644
--- a/include/asm-arm/arch-pxa/mfp.h
+++ b/arch/arm/mach-pxa/include/mach/mfp.h
@@ -1,5 +1,5 @@
 /*
- * linux/include/asm-arm/arch-pxa/mfp.h
+ * arch/arm/mach-pxa/include/mach/mfp.h
  *
  * Multi-Function Pin Definitions
  *
diff --git a/include/asm-arm/arch-pxa/mmc.h b/arch/arm/mach-pxa/include/mach/mmc.h
index 6d1304c9270f..6d1304c9270f 100644
--- a/include/asm-arm/arch-pxa/mmc.h
+++ b/arch/arm/mach-pxa/include/mach/mmc.h
diff --git a/arch/arm/mach-pxa/include/mach/mtd-xip.h b/arch/arm/mach-pxa/include/mach/mtd-xip.h
new file mode 100644
index 000000000000..4d452fcb1508
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/mtd-xip.h
@@ -0,0 +1,35 @@
+/*
+ * MTD primitives for XIP support. Architecture specific functions
+ *
+ * Do not include this file directly. It's included from linux/mtd/xip.h
+ * 
+ * Author:	Nicolas Pitre
+ * Created:	Nov 2, 2004
+ * Copyright:	(C) 2004 MontaVista Software, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ARCH_PXA_MTD_XIP_H__
+#define __ARCH_PXA_MTD_XIP_H__
+
+#include <mach/pxa-regs.h>
+
+#define xip_irqpending()	(ICIP & ICMR)
+
+/* we sample OSCR and convert desired delta to usec (1/4 ~= 1000000/3686400) */
+#define xip_currtime()		(OSCR)
+#define xip_elapsed_since(x)	(signed)((OSCR - (x)) / 4)
+
+/*
+ * xip_cpu_idle() is used when waiting for a delay equal or larger than
+ * the system timer tick period.  This should put the CPU into idle mode
+ * to save power and to be woken up only when some interrupts are pending.
+ * As above, this should not rely upon standard kernel code.
+ */
+
+#define xip_cpu_idle()  asm volatile ("mcr p14, 0, %0, c7, c0, 0" :: "r" (1))
+
+#endif /* __ARCH_PXA_MTD_XIP_H__ */
diff --git a/include/asm-arm/arch-pxa/ohci.h b/arch/arm/mach-pxa/include/mach/ohci.h
index e848a47128cd..e848a47128cd 100644
--- a/include/asm-arm/arch-pxa/ohci.h
+++ b/arch/arm/mach-pxa/include/mach/ohci.h
diff --git a/include/asm-arm/arch-pxa/palmtx.h b/arch/arm/mach-pxa/include/mach/palmtx.h
index 1e8bccbda510..1e8bccbda510 100644
--- a/include/asm-arm/arch-pxa/palmtx.h
+++ b/arch/arm/mach-pxa/include/mach/palmtx.h
diff --git a/include/asm-arm/arch-pxa/pcm027.h b/arch/arm/mach-pxa/include/mach/pcm027.h
index 7beae1472c3e..4dcd2e8baa61 100644
--- a/include/asm-arm/arch-pxa/pcm027.h
+++ b/arch/arm/mach-pxa/include/mach/pcm027.h
@@ -1,5 +1,5 @@
 /*
- * linux/include/asm-arm/arch-pxa/pcm027.h
+ * arch/arm/mach-pxa/include/mach/pcm027.h
  *
  * (c) 2003 Phytec Messtechnik GmbH <armlinux@phytec.de>
  * (c) 2007 Juergen Beisert <j.beisert@pengutronix.de>
diff --git a/include/asm-arm/arch-pxa/pcm990_baseboard.h b/arch/arm/mach-pxa/include/mach/pcm990_baseboard.h
index b699d0d7bdb2..8a4383b776d7 100644
--- a/include/asm-arm/arch-pxa/pcm990_baseboard.h
+++ b/arch/arm/mach-pxa/include/mach/pcm990_baseboard.h
@@ -1,5 +1,5 @@
 /*
- * include/asm-arm/arch-pxa/pcm990_baseboard.h
+ * arch/arm/mach-pxa/include/mach/pcm990_baseboard.h
  *
  * (c) 2003 Phytec Messtechnik GmbH <armlinux@phytec.de>
  * (c) 2007 Juergen Beisert <j.beisert@pengutronix.de>
@@ -19,7 +19,7 @@
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
 
-#include <asm/arch/pcm027.h>
+#include <mach/pcm027.h>
 
 /*
  * definitions relevant only when the PCM-990
@@ -29,14 +29,14 @@
 /* CPLD's interrupt controller is connected to PCM-027 GPIO 9 */
 #define PCM990_CTRL_INT_IRQ_GPIO	9
 #define PCM990_CTRL_INT_IRQ		IRQ_GPIO(PCM990_CTRL_INT_IRQ_GPIO)
-#define PCM990_CTRL_INT_IRQ_EDGE	IRQT_RISING
+#define PCM990_CTRL_INT_IRQ_EDGE	IRQ_TYPE_EDGE_RISING
 #define PCM990_CTRL_PHYS		PXA_CS1_PHYS	/* 16-Bit */
 #define PCM990_CTRL_BASE		0xea000000
 #define PCM990_CTRL_SIZE		(1*1024*1024)
 
 #define PCM990_CTRL_PWR_IRQ_GPIO	14
 #define PCM990_CTRL_PWR_IRQ		IRQ_GPIO(PCM990_CTRL_PWR_IRQ_GPIO)
-#define PCM990_CTRL_PWR_IRQ_EDGE	IRQT_RISING
+#define PCM990_CTRL_PWR_IRQ_EDGE	IRQ_TYPE_EDGE_RISING
 
 /* visible CPLD (U7) registers */
 #define PCM990_CTRL_REG0	0x0000	/* RESET REGISTER */
@@ -133,7 +133,7 @@
  */
 #define PCM990_IDE_IRQ_GPIO	13
 #define PCM990_IDE_IRQ		IRQ_GPIO(PCM990_IDE_IRQ_GPIO)
-#define PCM990_IDE_IRQ_EDGE	IRQT_RISING
+#define PCM990_IDE_IRQ_EDGE	IRQ_TYPE_EDGE_RISING
 #define PCM990_IDE_PLD_PHYS	0x20000000	/* 16 bit wide */
 #define PCM990_IDE_PLD_BASE	0xee000000
 #define PCM990_IDE_PLD_SIZE	(1*1024*1024)
@@ -189,11 +189,11 @@
  */
 #define PCM990_CF_IRQ_GPIO	11
 #define PCM990_CF_IRQ		IRQ_GPIO(PCM990_CF_IRQ_GPIO)
-#define PCM990_CF_IRQ_EDGE	IRQT_RISING
+#define PCM990_CF_IRQ_EDGE	IRQ_TYPE_EDGE_RISING
 
 #define PCM990_CF_CD_GPIO	12
 #define PCM990_CF_CD		IRQ_GPIO(PCM990_CF_CD_GPIO)
-#define PCM990_CF_CD_EDGE	IRQT_RISING
+#define PCM990_CF_CD_EDGE	IRQ_TYPE_EDGE_RISING
 
 #define PCM990_CF_PLD_PHYS	0x30000000	/* 16 bit wide */
 #define PCM990_CF_PLD_BASE	0xef000000
@@ -259,14 +259,14 @@
  */
 #define PCM990_AC97_IRQ_GPIO	10
 #define PCM990_AC97_IRQ		IRQ_GPIO(PCM990_AC97_IRQ_GPIO)
-#define PCM990_AC97_IRQ_EDGE	IRQT_RISING
+#define PCM990_AC97_IRQ_EDGE	IRQ_TYPE_EDGE_RISING
 
 /*
  * MMC phyCORE
  */
 #define PCM990_MMC0_IRQ_GPIO	9
 #define PCM990_MMC0_IRQ		IRQ_GPIO(PCM990_MMC0_IRQ_GPIO)
-#define PCM990_MMC0_IRQ_EDGE	IRQT_FALLING
+#define PCM990_MMC0_IRQ_EDGE	IRQ_TYPE_EDGE_FALLING
 
 /*
  * USB phyCore
diff --git a/include/asm-arm/arch-pxa/pm.h b/arch/arm/mach-pxa/include/mach/pm.h
index 261e5bc958db..261e5bc958db 100644
--- a/include/asm-arm/arch-pxa/pm.h
+++ b/arch/arm/mach-pxa/include/mach/pm.h
diff --git a/include/asm-arm/arch-pxa/poodle.h b/arch/arm/mach-pxa/include/mach/poodle.h
index 4d6a40315764..67debc47e8c6 100644
--- a/include/asm-arm/arch-pxa/poodle.h
+++ b/arch/arm/mach-pxa/include/mach/poodle.h
@@ -1,11 +1,11 @@
 /*
- * linux/include/asm-arm/arch-pxa/poodle.h
+ * arch/arm/mach-pxa/include/mach/poodle.h
  *
  * May be copied or modified under the terms of the GNU General Public
  * License.  See linux/COPYING for more information.
  *
  * Based on:
- *   linux/include/asm-arm/arch-sa1100/collie.h
+ *   arch/arm/mach-sa1100/include/mach/collie.h
  *
  * ChangeLog:
  *   04-06-2001 Lineo Japan, Inc.
@@ -70,6 +70,12 @@
 #define POODLE_SCOOP_IO_DIR	( POODLE_SCOOP_VPEN | POODLE_SCOOP_HS_OUT )
 #define POODLE_SCOOP_IO_OUT	( 0 )
 
+#define POODLE_LOCOMO_GPIO_AMP_ON      LOCOMO_GPIO(8)
+#define POODLE_LOCOMO_GPIO_MUTE_L      LOCOMO_GPIO(10)
+#define POODLE_LOCOMO_GPIO_MUTE_R      LOCOMO_GPIO(11)
+#define POODLE_LOCOMO_GPIO_232VCC_ON   LOCOMO_GPIO(12)
+#define POODLE_LOCOMO_GPIO_JK_B        LOCOMO_GPIO(13)
+
 extern struct platform_device poodle_locomo_device;
 
 #endif /* __ASM_ARCH_POODLE_H  */
diff --git a/include/asm-arm/arch-pxa/pxa-regs.h b/arch/arm/mach-pxa/include/mach/pxa-regs.h
index dce9308626b7..12288ca3cbb2 100644
--- a/include/asm-arm/arch-pxa/pxa-regs.h
+++ b/arch/arm/mach-pxa/include/mach/pxa-regs.h
@@ -1,5 +1,5 @@
 /*
- *  linux/include/asm-arm/arch-pxa/pxa-regs.h
+ *  arch/arm/mach-pxa/include/mach/pxa-regs.h
  *
  *  Author:	Nicolas Pitre
  *  Created:	Jun 15, 2001
@@ -829,7 +829,7 @@
  */
 
 /*
- * SSP Serial Port Registers - see include/asm-arm/arch-pxa/regs-ssp.h
+ * SSP Serial Port Registers - see arch/arm/mach-pxa/include/mach/regs-ssp.h
  */
 
 /*
@@ -837,7 +837,7 @@
  */
 
 /*
- * Core Clock - see include/asm-arm/arch-pxa/pxa2xx-regs.h
+ * Core Clock - see arch/arm/mach-pxa/include/mach/pxa2xx-regs.h
  */
 
 #ifdef CONFIG_PXA27x
diff --git a/include/asm-arm/arch-pxa/pxa25x-udc.h b/arch/arm/mach-pxa/include/mach/pxa25x-udc.h
index 840305916b6d..1b80a4805a60 100644
--- a/include/asm-arm/arch-pxa/pxa25x-udc.h
+++ b/arch/arm/mach-pxa/include/mach/pxa25x-udc.h
@@ -2,7 +2,7 @@
 #define _ASM_ARCH_PXA25X_UDC_H
 
 #ifdef _ASM_ARCH_PXA27X_UDC_H
-#error You can't include both PXA25x and PXA27x UDC support
+#error "You can't include both PXA25x and PXA27x UDC support"
 #endif
 
 #define UDC_RES1	__REG(0x40600004)  /* UDC Undocumented - Reserved1 */
diff --git a/include/asm-arm/arch-pxa/pxa27x-udc.h b/arch/arm/mach-pxa/include/mach/pxa27x-udc.h
index ab1443f8bd89..ab1443f8bd89 100644
--- a/include/asm-arm/arch-pxa/pxa27x-udc.h
+++ b/arch/arm/mach-pxa/include/mach/pxa27x-udc.h
diff --git a/include/asm-arm/arch-pxa/pxa27x_keypad.h b/arch/arm/mach-pxa/include/mach/pxa27x_keypad.h
index d5a48a96dea7..d5a48a96dea7 100644
--- a/include/asm-arm/arch-pxa/pxa27x_keypad.h
+++ b/arch/arm/mach-pxa/include/mach/pxa27x_keypad.h
diff --git a/include/asm-arm/arch-pxa/pxa2xx-gpio.h b/arch/arm/mach-pxa/include/mach/pxa2xx-gpio.h
index 6ef1dd09970b..6ef1dd09970b 100644
--- a/include/asm-arm/arch-pxa/pxa2xx-gpio.h
+++ b/arch/arm/mach-pxa/include/mach/pxa2xx-gpio.h
diff --git a/include/asm-arm/arch-pxa/pxa2xx-regs.h b/arch/arm/mach-pxa/include/mach/pxa2xx-regs.h
index 73e0a329cf7f..806ecfea44bf 100644
--- a/include/asm-arm/arch-pxa/pxa2xx-regs.h
+++ b/arch/arm/mach-pxa/include/mach/pxa2xx-regs.h
@@ -1,5 +1,5 @@
 /*
- *  linux/include/asm-arm/arch-pxa/pxa2xx-regs.h
+ *  arch/arm/mach-pxa/include/mach/pxa2xx-regs.h
  *
  *  Taken from pxa-regs.h by Russell King
  *
diff --git a/include/asm-arm/arch-pxa/pxa2xx_spi.h b/arch/arm/mach-pxa/include/mach/pxa2xx_spi.h
index 2206cb61a9f9..2206cb61a9f9 100644
--- a/include/asm-arm/arch-pxa/pxa2xx_spi.h
+++ b/arch/arm/mach-pxa/include/mach/pxa2xx_spi.h
diff --git a/include/asm-arm/arch-pxa/pxa3xx-regs.h b/arch/arm/mach-pxa/include/mach/pxa3xx-regs.h
index fe9364c83a28..39eb68319e28 100644
--- a/include/asm-arm/arch-pxa/pxa3xx-regs.h
+++ b/arch/arm/mach-pxa/include/mach/pxa3xx-regs.h
@@ -1,5 +1,5 @@
 /*
- * linux/include/asm-arm/arch-pxa/pxa3xx-regs.h
+ * arch/arm/mach-pxa/include/mach/pxa3xx-regs.h
  *
  * PXA3xx specific register definitions
  *
diff --git a/include/asm-arm/arch-pxa/pxa3xx_nand.h b/arch/arm/mach-pxa/include/mach/pxa3xx_nand.h
index eb4b190b6657..eb4b190b6657 100644
--- a/include/asm-arm/arch-pxa/pxa3xx_nand.h
+++ b/arch/arm/mach-pxa/include/mach/pxa3xx_nand.h
diff --git a/include/asm-arm/arch-pxa/pxafb.h b/arch/arm/mach-pxa/include/mach/pxafb.h
index daf018d0c604..8e591118371e 100644
--- a/include/asm-arm/arch-pxa/pxafb.h
+++ b/arch/arm/mach-pxa/include/mach/pxafb.h
@@ -1,5 +1,5 @@
 /*
- *  linux/include/asm-arm/arch-pxa/pxafb.h
+ *  arch/arm/mach-pxa/include/mach/pxafb.h
  *
  *  Support for the xscale frame buffer.
  *
@@ -13,7 +13,7 @@
  */
 
 #include <linux/fb.h>
-#include <asm/arch/regs-lcd.h>
+#include <mach/regs-lcd.h>
 
 /*
  * Supported LCD connections
@@ -28,6 +28,7 @@
  * bits 10-17 : for AC Bias Pin Frequency
  * bit     18 : for output enable polarity
  * bit     19 : for pixel clock edge
+ * bit     20 : for output pixel format when base is RGBT16
  */
 #define LCD_CONN_TYPE(_x)	((_x) & 0x0f)
 #define LCD_CONN_WIDTH(_x)	(((_x) >> 4) & 0x1f)
@@ -53,10 +54,11 @@
 #define LCD_SMART_PANEL_18BPP	((18 << 4) | LCD_TYPE_SMART_PANEL)
 
 #define LCD_AC_BIAS_FREQ(x)	(((x) & 0xff) << 10)
-#define LCD_BIAS_ACTIVE_HIGH	(0 << 17)
-#define LCD_BIAS_ACTIVE_LOW	(1 << 17)
-#define LCD_PCLK_EDGE_RISE	(0 << 18)
-#define LCD_PCLK_EDGE_FALL	(1 << 18)
+#define LCD_BIAS_ACTIVE_HIGH	(0 << 18)
+#define LCD_BIAS_ACTIVE_LOW	(1 << 18)
+#define LCD_PCLK_EDGE_RISE	(0 << 19)
+#define LCD_PCLK_EDGE_FALL	(1 << 19)
+#define LCD_ALTERNATE_MAPPING	(1 << 20)
 
 /*
  * This structure describes the machine which we are running on.
diff --git a/arch/arm/mach-pxa/include/mach/regs-lcd.h b/arch/arm/mach-pxa/include/mach/regs-lcd.h
new file mode 100644
index 000000000000..c689c4ea769c
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/regs-lcd.h
@@ -0,0 +1,180 @@
+#ifndef __ASM_ARCH_REGS_LCD_H
+#define __ASM_ARCH_REGS_LCD_H
+
+#include <mach/bitfield.h>
+
+/*
+ * LCD Controller Registers and Bits Definitions
+ */
+#define LCCR0		(0x000)	/* LCD Controller Control Register 0 */
+#define LCCR1		(0x004)	/* LCD Controller Control Register 1 */
+#define LCCR2		(0x008)	/* LCD Controller Control Register 2 */
+#define LCCR3		(0x00C)	/* LCD Controller Control Register 3 */
+#define LCCR4		(0x010)	/* LCD Controller Control Register 4 */
+#define LCCR5		(0x014)	/* LCD Controller Control Register 5 */
+#define DFBR0		(0x020)	/* DMA Channel 0 Frame Branch Register */
+#define DFBR1		(0x024)	/* DMA Channel 1 Frame Branch Register */
+#define LCSR		(0x038)	/* LCD Controller Status Register */
+#define LIIDR		(0x03C)	/* LCD Controller Interrupt ID Register */
+#define TMEDRGBR	(0x040)	/* TMED RGB Seed Register */
+#define TMEDCR		(0x044)	/* TMED Control Register */
+
+#define CMDCR		(0x100)	/* Command Control Register */
+#define PRSR		(0x104)	/* Panel Read Status Register */
+
+#define LCCR3_1BPP	(0 << 24)
+#define LCCR3_2BPP	(1 << 24)
+#define LCCR3_4BPP	(2 << 24)
+#define LCCR3_8BPP	(3 << 24)
+#define LCCR3_16BPP	(4 << 24)
+#define LCCR3_18BPP	(5 << 24)
+#define LCCR3_18BPP_P	(6 << 24)
+#define LCCR3_19BPP	(7 << 24)
+#define LCCR3_19BPP_P	(1 << 29)
+#define LCCR3_24BPP	((1 << 29) | (1 << 24))
+#define LCCR3_25BPP	((1 << 29) | (2 << 24))
+
+#define LCCR3_PDFOR_0	(0 << 30)
+#define LCCR3_PDFOR_1	(1 << 30)
+#define LCCR3_PDFOR_2	(2 << 30)
+#define LCCR3_PDFOR_3	(3 << 30)
+
+#define LCCR4_PAL_FOR_0	(0 << 15)
+#define LCCR4_PAL_FOR_1	(1 << 15)
+#define LCCR4_PAL_FOR_2	(2 << 15)
+#define LCCR4_PAL_FOR_MASK	(3 << 15)
+
+#define FDADR0		(0x200)	/* DMA Channel 0 Frame Descriptor Address Register */
+#define FSADR0		(0x204)	/* DMA Channel 0 Frame Source Address Register */
+#define FIDR0		(0x208)	/* DMA Channel 0 Frame ID Register */
+#define LDCMD0		(0x20C)	/* DMA Channel 0 Command Register */
+#define FDADR1		(0x210)	/* DMA Channel 1 Frame Descriptor Address Register */
+#define FSADR1		(0x214)	/* DMA Channel 1 Frame Source Address Register */
+#define FIDR1		(0x218)	/* DMA Channel 1 Frame ID Register */
+#define LDCMD1		(0x21C)	/* DMA Channel 1 Command Register */
+#define FDADR6		(0x260) /* DMA Channel 6 Frame Descriptor Address Register */
+#define FSADR6		(0x264) /* DMA Channel 6 Frame Source Address Register */
+#define FIDR6		(0x268) /* DMA Channel 6 Frame ID Register */
+
+#define LCCR0_ENB	(1 << 0)	/* LCD Controller enable */
+#define LCCR0_CMS	(1 << 1)	/* Color/Monochrome Display Select */
+#define LCCR0_Color	(LCCR0_CMS*0)	/*  Color display */
+#define LCCR0_Mono	(LCCR0_CMS*1)	/*  Monochrome display */
+#define LCCR0_SDS	(1 << 2)	/* Single/Dual Panel Display Select */
+#define LCCR0_Sngl	(LCCR0_SDS*0)	/*  Single panel display */
+#define LCCR0_Dual	(LCCR0_SDS*1)	/*  Dual panel display */
+
+#define LCCR0_LDM	(1 << 3)	/* LCD Disable Done Mask */
+#define LCCR0_SFM	(1 << 4)	/* Start of frame mask */
+#define LCCR0_IUM	(1 << 5)	/* Input FIFO underrun mask */
+#define LCCR0_EFM	(1 << 6)	/* End of Frame mask */
+#define LCCR0_PAS	(1 << 7)	/* Passive/Active display Select */
+#define LCCR0_Pas	(LCCR0_PAS*0)	/*  Passive display (STN) */
+#define LCCR0_Act	(LCCR0_PAS*1)	/*  Active display (TFT) */
+#define LCCR0_DPD	(1 << 9)	/* Double Pixel Data (monochrome) */
+#define LCCR0_4PixMono	(LCCR0_DPD*0)	/*  4-Pixel/clock Monochrome display */
+#define LCCR0_8PixMono	(LCCR0_DPD*1)	/*  8-Pixel/clock Monochrome display */
+#define LCCR0_DIS	(1 << 10)	/* LCD Disable */
+#define LCCR0_QDM	(1 << 11)	/* LCD Quick Disable mask */
+#define LCCR0_PDD	(0xff << 12)	/* Palette DMA request delay */
+#define LCCR0_PDD_S	12
+#define LCCR0_BM	(1 << 20)	/* Branch mask */
+#define LCCR0_OUM	(1 << 21)	/* Output FIFO underrun mask */
+#define LCCR0_LCDT	(1 << 22)	/* LCD panel type */
+#define LCCR0_RDSTM	(1 << 23)	/* Read status interrupt mask */
+#define LCCR0_CMDIM	(1 << 24)	/* Command interrupt mask */
+#define LCCR0_OUC	(1 << 25)	/* Overlay Underlay control bit */
+#define LCCR0_LDDALT	(1 << 26)	/* LDD alternate mapping control */
+
+#define LCCR1_PPL	Fld (10, 0)	/* Pixels Per Line - 1 */
+#define LCCR1_DisWdth(Pixel)	(((Pixel) - 1) << FShft (LCCR1_PPL))
+
+#define LCCR1_HSW	Fld (6, 10)	/* Horizontal Synchronization */
+#define LCCR1_HorSnchWdth(Tpix)	(((Tpix) - 1) << FShft (LCCR1_HSW))
+
+#define LCCR1_ELW	Fld (8, 16)	/* End-of-Line pixel clock Wait - 1 */
+#define LCCR1_EndLnDel(Tpix)	(((Tpix) - 1) << FShft (LCCR1_ELW))
+
+#define LCCR1_BLW	Fld (8, 24)	/* Beginning-of-Line pixel clock */
+#define LCCR1_BegLnDel(Tpix)	(((Tpix) - 1) << FShft (LCCR1_BLW))
+
+#define LCCR2_LPP	Fld (10, 0)	/* Line Per Panel - 1 */
+#define LCCR2_DisHght(Line)	(((Line) - 1) << FShft (LCCR2_LPP))
+
+#define LCCR2_VSW	Fld (6, 10)	/* Vertical Synchronization pulse - 1 */
+#define LCCR2_VrtSnchWdth(Tln)	(((Tln) - 1) << FShft (LCCR2_VSW))
+
+#define LCCR2_EFW	Fld (8, 16)	/* End-of-Frame line clock Wait */
+#define LCCR2_EndFrmDel(Tln)	((Tln) << FShft (LCCR2_EFW))
+
+#define LCCR2_BFW	Fld (8, 24)	/* Beginning-of-Frame line clock */
+#define LCCR2_BegFrmDel(Tln)	((Tln) << FShft (LCCR2_BFW))
+
+#define LCCR3_API	(0xf << 16)	/* AC Bias pin trasitions per interrupt */
+#define LCCR3_API_S	16
+#define LCCR3_VSP	(1 << 20)	/* vertical sync polarity */
+#define LCCR3_HSP	(1 << 21)	/* horizontal sync polarity */
+#define LCCR3_PCP	(1 << 22)	/* Pixel Clock Polarity (L_PCLK) */
+#define LCCR3_PixRsEdg	(LCCR3_PCP*0)	/*  Pixel clock Rising-Edge */
+#define LCCR3_PixFlEdg	(LCCR3_PCP*1)	/*  Pixel clock Falling-Edge */
+
+#define LCCR3_OEP	(1 << 23)	/* Output Enable Polarity */
+#define LCCR3_OutEnH	(LCCR3_OEP*0)	/*  Output Enable active High */
+#define LCCR3_OutEnL	(LCCR3_OEP*1)	/*  Output Enable active Low */
+
+#define LCCR3_DPC	(1 << 27)	/* double pixel clock mode */
+#define LCCR3_PCD	Fld (8, 0)	/* Pixel Clock Divisor */
+#define LCCR3_PixClkDiv(Div)	(((Div) << FShft (LCCR3_PCD)))
+
+#define LCCR3_BPP	Fld (3, 24)	/* Bit Per Pixel */
+#define LCCR3_Bpp(Bpp)	(((Bpp) << FShft (LCCR3_BPP)))
+
+#define LCCR3_ACB	Fld (8, 8)	/* AC Bias */
+#define LCCR3_Acb(Acb)	(((Acb) << FShft (LCCR3_ACB)))
+
+#define LCCR3_HorSnchH	(LCCR3_HSP*0)	/*  HSP Active High */
+#define LCCR3_HorSnchL	(LCCR3_HSP*1)	/*  HSP Active Low */
+
+#define LCCR3_VrtSnchH	(LCCR3_VSP*0)	/*  VSP Active High */
+#define LCCR3_VrtSnchL	(LCCR3_VSP*1)	/*  VSP Active Low */
+
+#define LCCR5_IUM(x)	(1 << ((x) + 23)) /* input underrun mask */
+#define LCCR5_BSM(x)	(1 << ((x) + 15)) /* branch mask */
+#define LCCR5_EOFM(x)	(1 << ((x) + 7))  /* end of frame mask */
+#define LCCR5_SOFM(x)	(1 << ((x) + 0))  /* start of frame mask */
+
+#define LCSR_LDD	(1 << 0)	/* LCD Disable Done */
+#define LCSR_SOF	(1 << 1)	/* Start of frame */
+#define LCSR_BER	(1 << 2)	/* Bus error */
+#define LCSR_ABC	(1 << 3)	/* AC Bias count */
+#define LCSR_IUL	(1 << 4)	/* input FIFO underrun Lower panel */
+#define LCSR_IUU	(1 << 5)	/* input FIFO underrun Upper panel */
+#define LCSR_OU		(1 << 6)	/* output FIFO underrun */
+#define LCSR_QD		(1 << 7)	/* quick disable */
+#define LCSR_EOF	(1 << 8)	/* end of frame */
+#define LCSR_BS		(1 << 9)	/* branch status */
+#define LCSR_SINT	(1 << 10)	/* subsequent interrupt */
+#define LCSR_RD_ST	(1 << 11)	/* read status */
+#define LCSR_CMD_INT	(1 << 12)	/* command interrupt */
+
+#define LDCMD_PAL	(1 << 26)	/* instructs DMA to load palette buffer */
+
+/* smartpanel related */
+#define PRSR_DATA(x)	((x) & 0xff)	/* Panel Data */
+#define PRSR_A0		(1 << 8)	/* Read Data Source */
+#define PRSR_ST_OK	(1 << 9)	/* Status OK */
+#define PRSR_CON_NT	(1 << 10)	/* Continue to Next Command */
+
+#define SMART_CMD_A0			 (0x1 << 8)
+#define SMART_CMD_READ_STATUS_REG	 (0x0 << 9)
+#define SMART_CMD_READ_FRAME_BUFFER	((0x0 << 9) | SMART_CMD_A0)
+#define SMART_CMD_WRITE_COMMAND		 (0x1 << 9)
+#define SMART_CMD_WRITE_DATA		((0x1 << 9) | SMART_CMD_A0)
+#define SMART_CMD_WRITE_FRAME		((0x2 << 9) | SMART_CMD_A0)
+#define SMART_CMD_WAIT_FOR_VSYNC	 (0x3 << 9)
+#define SMART_CMD_NOOP			 (0x4 << 9)
+#define SMART_CMD_INTERRUPT		 (0x5 << 9)
+
+#define SMART_CMD(x)	(SMART_CMD_WRITE_COMMAND | ((x) & 0xff))
+#define SMART_DAT(x)	(SMART_CMD_WRITE_DATA | ((x) & 0xff))
+#endif /* __ASM_ARCH_REGS_LCD_H */
diff --git a/include/asm-arm/arch-pxa/regs-ssp.h b/arch/arm/mach-pxa/include/mach/regs-ssp.h
index 3c04cde2cf1f..3c04cde2cf1f 100644
--- a/include/asm-arm/arch-pxa/regs-ssp.h
+++ b/arch/arm/mach-pxa/include/mach/regs-ssp.h
diff --git a/arch/arm/mach-pxa/include/mach/reset.h b/arch/arm/mach-pxa/include/mach/reset.h
new file mode 100644
index 000000000000..9489a48871a8
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/reset.h
@@ -0,0 +1,18 @@
+#ifndef __ASM_ARCH_RESET_H
+#define __ASM_ARCH_RESET_H
+
+#define RESET_STATUS_HARDWARE	(1 << 0)	/* Hardware Reset */
+#define RESET_STATUS_WATCHDOG	(1 << 1)	/* Watchdog Reset */
+#define RESET_STATUS_LOWPOWER	(1 << 2)	/* Low Power/Sleep Exit */
+#define RESET_STATUS_GPIO	(1 << 3)	/* GPIO Reset */
+#define RESET_STATUS_ALL	(0xf)
+
+extern unsigned int reset_status;
+extern void clear_reset_status(unsigned int mask);
+
+/*
+ * register GPIO as reset generator
+ */
+extern int init_gpio_reset(int gpio);
+
+#endif /* __ASM_ARCH_RESET_H */
diff --git a/include/asm-arm/arch-pxa/sharpsl.h b/arch/arm/mach-pxa/include/mach/sharpsl.h
index 3b1d4a72d4d1..3b1d4a72d4d1 100644
--- a/include/asm-arm/arch-pxa/sharpsl.h
+++ b/arch/arm/mach-pxa/include/mach/sharpsl.h
diff --git a/include/asm-arm/arch-pxa/spitz.h b/arch/arm/mach-pxa/include/mach/spitz.h
index bd14365f7ed5..bd14365f7ed5 100644
--- a/include/asm-arm/arch-pxa/spitz.h
+++ b/arch/arm/mach-pxa/include/mach/spitz.h
diff --git a/include/asm-arm/arch-pxa/ssp.h b/arch/arm/mach-pxa/include/mach/ssp.h
index a012882c9ee6..a012882c9ee6 100644
--- a/include/asm-arm/arch-pxa/ssp.h
+++ b/arch/arm/mach-pxa/include/mach/ssp.h
diff --git a/arch/arm/mach-pxa/include/mach/system.h b/arch/arm/mach-pxa/include/mach/system.h
new file mode 100644
index 000000000000..0f381e692999
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/system.h
@@ -0,0 +1,24 @@
+/*
+ * arch/arm/mach-pxa/include/mach/system.h
+ *
+ * Author:	Nicolas Pitre
+ * Created:	Jun 15, 2001
+ * Copyright:	MontaVista Software Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <asm/proc-fns.h>
+#include "hardware.h"
+#include "pxa2xx-regs.h"
+#include "pxa-regs.h"
+
+static inline void arch_idle(void)
+{
+	cpu_do_idle();
+}
+
+
+void arch_reset(char mode);
diff --git a/arch/arm/mach-pxa/include/mach/timex.h b/arch/arm/mach-pxa/include/mach/timex.h
new file mode 100644
index 000000000000..b05fc6683c47
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/timex.h
@@ -0,0 +1,26 @@
+/*
+ * arch/arm/mach-pxa/include/mach/timex.h
+ *
+ * Author:	Nicolas Pitre
+ * Created:	Jun 15, 2001
+ * Copyright:	MontaVista Software Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+
+#if defined(CONFIG_PXA25x)
+/* PXA250/210 timer base */
+#define CLOCK_TICK_RATE 3686400
+#elif defined(CONFIG_PXA27x)
+/* PXA27x timer base */
+#ifdef CONFIG_MACH_MAINSTONE
+#define CLOCK_TICK_RATE 3249600
+#else
+#define CLOCK_TICK_RATE 3250000
+#endif
+#else
+#define CLOCK_TICK_RATE 3250000
+#endif
diff --git a/include/asm-arm/arch-pxa/tosa.h b/arch/arm/mach-pxa/include/mach/tosa.h
index a72803f0461b..a72803f0461b 100644
--- a/include/asm-arm/arch-pxa/tosa.h
+++ b/arch/arm/mach-pxa/include/mach/tosa.h
diff --git a/include/asm-arm/arch-pxa/tosa_bt.h b/arch/arm/mach-pxa/include/mach/tosa_bt.h
index efc3c3d3b75d..efc3c3d3b75d 100644
--- a/include/asm-arm/arch-pxa/tosa_bt.h
+++ b/arch/arm/mach-pxa/include/mach/tosa_bt.h
diff --git a/include/asm-arm/arch-pxa/trizeps4.h b/arch/arm/mach-pxa/include/mach/trizeps4.h
index 641d0ec110bb..641d0ec110bb 100644
--- a/include/asm-arm/arch-pxa/trizeps4.h
+++ b/arch/arm/mach-pxa/include/mach/trizeps4.h
diff --git a/arch/arm/mach-pxa/include/mach/udc.h b/arch/arm/mach-pxa/include/mach/udc.h
new file mode 100644
index 000000000000..2f82332e81a0
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/udc.h
@@ -0,0 +1,8 @@
+/*
+ * arch/arm/mach-pxa/include/mach/udc.h
+ *
+ */
+#include <asm/mach/udc_pxa2xx.h>
+
+extern void pxa_set_udc_info(struct pxa2xx_udc_mach_info *info);
+
diff --git a/arch/arm/mach-pxa/include/mach/uncompress.h b/arch/arm/mach-pxa/include/mach/uncompress.h
new file mode 100644
index 000000000000..21e3e890af98
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/uncompress.h
@@ -0,0 +1,45 @@
+/*
+ * arch/arm/mach-pxa/include/mach/uncompress.h
+ *
+ * Author:	Nicolas Pitre
+ * Copyright:	(C) 2001 MontaVista Software Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/serial_reg.h>
+#include <mach/pxa-regs.h>
+#include <asm/mach-types.h>
+
+#define __REG(x)       ((volatile unsigned long *)x)
+
+static volatile unsigned long *UART = FFUART;
+
+static inline void putc(char c)
+{
+	if (!(UART[UART_IER] & IER_UUE))
+		return;
+	while (!(UART[UART_LSR] & LSR_TDRQ))
+		barrier();
+	UART[UART_TX] = c;
+}
+
+/*
+ * This does not append a newline
+ */
+static inline void flush(void)
+{
+}
+
+static inline void arch_decomp_setup(void)
+{
+	if (machine_is_littleton())
+		UART = STUART;
+}
+
+/*
+ * nothing to do
+ */
+#define arch_decomp_wdog()
diff --git a/arch/arm/mach-pxa/include/mach/vmalloc.h b/arch/arm/mach-pxa/include/mach/vmalloc.h
new file mode 100644
index 000000000000..e90c5eeb81dd
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/vmalloc.h
@@ -0,0 +1,11 @@
+/*
+ * arch/arm/mach-pxa/include/mach/vmalloc.h
+ *
+ * Author:	Nicolas Pitre
+ * Copyright:	(C) 2001 MontaVista Software Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#define VMALLOC_END       (0xe8000000)
diff --git a/include/asm-arm/arch-pxa/zylonite.h b/arch/arm/mach-pxa/include/mach/zylonite.h
index 0d35ca04731e..0d35ca04731e 100644
--- a/include/asm-arm/arch-pxa/zylonite.h
+++ b/arch/arm/mach-pxa/include/mach/zylonite.h
diff --git a/arch/arm/mach-pxa/irq.c b/arch/arm/mach-pxa/irq.c
index fbff557bb225..5e95c5372fec 100644
--- a/arch/arm/mach-pxa/irq.c
+++ b/arch/arm/mach-pxa/irq.c
@@ -17,10 +17,10 @@
 #include <linux/interrupt.h>
 #include <linux/sysdev.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/irq.h>
 #include <asm/mach/irq.h>
-#include <asm/arch/pxa-regs.h>
+#include <mach/pxa-regs.h>
 
 #include "generic.h"
 
diff --git a/arch/arm/mach-pxa/leds-idp.c b/arch/arm/mach-pxa/leds-idp.c
index 38aa9270540e..18b20d469410 100644
--- a/arch/arm/mach-pxa/leds-idp.c
+++ b/arch/arm/mach-pxa/leds-idp.c
@@ -14,12 +14,12 @@
 
 #include <linux/init.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/leds.h>
 #include <asm/system.h>
 
-#include <asm/arch/pxa-regs.h>
-#include <asm/arch/idp.h>
+#include <mach/pxa-regs.h>
+#include <mach/idp.h>
 
 #include "leds.h"
 
diff --git a/arch/arm/mach-pxa/leds-lubbock.c b/arch/arm/mach-pxa/leds-lubbock.c
index afbc6698e27c..1a258029c33c 100644
--- a/arch/arm/mach-pxa/leds-lubbock.c
+++ b/arch/arm/mach-pxa/leds-lubbock.c
@@ -13,11 +13,11 @@
 
 #include <linux/init.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/leds.h>
 #include <asm/system.h>
-#include <asm/arch/pxa-regs.h>
-#include <asm/arch/lubbock.h>
+#include <mach/pxa-regs.h>
+#include <mach/lubbock.h>
 
 #include "leds.h"
 
diff --git a/arch/arm/mach-pxa/leds-mainstone.c b/arch/arm/mach-pxa/leds-mainstone.c
index 065293eb0d82..95e06b849634 100644
--- a/arch/arm/mach-pxa/leds-mainstone.c
+++ b/arch/arm/mach-pxa/leds-mainstone.c
@@ -12,12 +12,12 @@
 
 #include <linux/init.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/leds.h>
 #include <asm/system.h>
 
-#include <asm/arch/pxa-regs.h>
-#include <asm/arch/mainstone.h>
+#include <mach/pxa-regs.h>
+#include <mach/mainstone.h>
 
 #include "leds.h"
 
diff --git a/arch/arm/mach-pxa/leds-trizeps4.c b/arch/arm/mach-pxa/leds-trizeps4.c
index 21880daabafe..3bc29007df3a 100644
--- a/arch/arm/mach-pxa/leds-trizeps4.c
+++ b/arch/arm/mach-pxa/leds-trizeps4.c
@@ -12,14 +12,14 @@
 
 #include <linux/init.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/system.h>
 #include <asm/types.h>
 #include <asm/leds.h>
 
-#include <asm/arch/pxa-regs.h>
-#include <asm/arch/pxa2xx-gpio.h>
-#include <asm/arch/trizeps4.h>
+#include <mach/pxa-regs.h>
+#include <mach/pxa2xx-gpio.h>
+#include <mach/trizeps4.h>
 
 #include "leds.h"
 
diff --git a/arch/arm/mach-pxa/littleton.c b/arch/arm/mach-pxa/littleton.c
index dd759d03a9fd..58f3402a0375 100644
--- a/arch/arm/mach-pxa/littleton.c
+++ b/arch/arm/mach-pxa/littleton.c
@@ -26,21 +26,21 @@
 #include <asm/setup.h>
 #include <asm/memory.h>
 #include <asm/mach-types.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/irq.h>
 
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
-#include <asm/arch/pxa-regs.h>
-#include <asm/arch/mfp-pxa300.h>
-#include <asm/arch/gpio.h>
-#include <asm/arch/pxafb.h>
-#include <asm/arch/ssp.h>
-#include <asm/arch/pxa27x_keypad.h>
-#include <asm/arch/pxa3xx_nand.h>
-#include <asm/arch/littleton.h>
+#include <mach/pxa-regs.h>
+#include <mach/mfp-pxa300.h>
+#include <mach/gpio.h>
+#include <mach/pxafb.h>
+#include <mach/ssp.h>
+#include <mach/pxa27x_keypad.h>
+#include <mach/pxa3xx_nand.h>
+#include <mach/littleton.h>
 
 #include "generic.h"
 
diff --git a/arch/arm/mach-pxa/lpd270.c b/arch/arm/mach-pxa/lpd270.c
index cc1c4fa06145..b7038948d1d4 100644
--- a/arch/arm/mach-pxa/lpd270.c
+++ b/arch/arm/mach-pxa/lpd270.c
@@ -29,7 +29,7 @@
 #include <asm/setup.h>
 #include <asm/memory.h>
 #include <asm/mach-types.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/irq.h>
 #include <asm/sizes.h>
 
@@ -38,15 +38,15 @@
 #include <asm/mach/irq.h>
 #include <asm/mach/flash.h>
 
-#include <asm/arch/pxa-regs.h>
-#include <asm/arch/pxa2xx-regs.h>
-#include <asm/arch/pxa2xx-gpio.h>
-#include <asm/arch/lpd270.h>
-#include <asm/arch/audio.h>
-#include <asm/arch/pxafb.h>
-#include <asm/arch/mmc.h>
-#include <asm/arch/irda.h>
-#include <asm/arch/ohci.h>
+#include <mach/pxa-regs.h>
+#include <mach/pxa2xx-regs.h>
+#include <mach/pxa2xx-gpio.h>
+#include <mach/lpd270.h>
+#include <mach/audio.h>
+#include <mach/pxafb.h>
+#include <mach/mmc.h>
+#include <mach/irda.h>
+#include <mach/ohci.h>
 
 #include "generic.h"
 #include "devices.h"
@@ -113,7 +113,7 @@ static void __init lpd270_init_irq(void)
 		set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
 	}
 	set_irq_chained_handler(IRQ_GPIO(0), lpd270_irq_handler);
-	set_irq_type(IRQ_GPIO(0), IRQT_FALLING);
+	set_irq_type(IRQ_GPIO(0), IRQ_TYPE_EDGE_FALLING);
 }
 
 
diff --git a/arch/arm/mach-pxa/lubbock.c b/arch/arm/mach-pxa/lubbock.c
index ac26423cd20c..4ffdff2d9ff1 100644
--- a/arch/arm/mach-pxa/lubbock.c
+++ b/arch/arm/mach-pxa/lubbock.c
@@ -25,12 +25,12 @@
 
 #include <linux/spi/spi.h>
 #include <linux/spi/ads7846.h>
-#include <asm/arch/pxa2xx_spi.h>
+#include <mach/pxa2xx_spi.h>
 
 #include <asm/setup.h>
 #include <asm/memory.h>
 #include <asm/mach-types.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/irq.h>
 #include <asm/sizes.h>
 
@@ -41,17 +41,18 @@
 
 #include <asm/hardware/sa1111.h>
 
-#include <asm/arch/pxa-regs.h>
-#include <asm/arch/pxa2xx-regs.h>
-#include <asm/arch/mfp-pxa25x.h>
-#include <asm/arch/audio.h>
-#include <asm/arch/lubbock.h>
-#include <asm/arch/udc.h>
-#include <asm/arch/irda.h>
-#include <asm/arch/pxafb.h>
-#include <asm/arch/mmc.h>
+#include <mach/pxa-regs.h>
+#include <mach/pxa2xx-regs.h>
+#include <mach/mfp-pxa25x.h>
+#include <mach/audio.h>
+#include <mach/lubbock.h>
+#include <mach/udc.h>
+#include <mach/irda.h>
+#include <mach/pxafb.h>
+#include <mach/mmc.h>
 
 #include "generic.h"
+#include "clock.h"
 #include "devices.h"
 
 static unsigned long lubbock_pin_config[] __initdata = {
@@ -152,7 +153,7 @@ static void __init lubbock_init_irq(void)
 	}
 
 	set_irq_chained_handler(IRQ_GPIO(0), lubbock_irq_handler);
-	set_irq_type(IRQ_GPIO(0), IRQT_FALLING);
+	set_irq_type(IRQ_GPIO(0), IRQ_TYPE_EDGE_FALLING);
 }
 
 #ifdef CONFIG_PM
@@ -224,7 +225,7 @@ static struct platform_device sa1111_device = {
  * for the temperature sensors.
  */
 static struct pxa2xx_spi_master pxa_ssp_master_info = {
-	.num_chipselect	= 0,
+	.num_chipselect	= 1,
 };
 
 static int lubbock_ads7846_pendown_state(void)
@@ -485,6 +486,7 @@ static void __init lubbock_init(void)
 
 	pxa2xx_mfp_config(ARRAY_AND_SIZE(lubbock_pin_config));
 
+	clk_add_alias("SA1111_CLK", NULL, "GPIO11_CLK", NULL);
 	pxa_set_udc_info(&udc_info);
 	set_pxa_fb_info(&sharp_lm8v31);
 	pxa_set_mci_info(&lubbock_mci_platform_data);
diff --git a/arch/arm/mach-pxa/magician.c b/arch/arm/mach-pxa/magician.c
index c9d274f0048f..143f28adaf95 100644
--- a/arch/arm/mach-pxa/magician.c
+++ b/arch/arm/mach-pxa/magician.c
@@ -26,18 +26,18 @@
 #include <linux/pda_power.h>
 #include <linux/pwm_backlight.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
-#include <asm/arch/magician.h>
-#include <asm/arch/mfp-pxa27x.h>
-#include <asm/arch/pxa-regs.h>
-#include <asm/arch/pxa2xx-regs.h>
-#include <asm/arch/pxafb.h>
-#include <asm/arch/i2c.h>
-#include <asm/arch/mmc.h>
-#include <asm/arch/irda.h>
-#include <asm/arch/ohci.h>
+#include <mach/magician.h>
+#include <mach/mfp-pxa27x.h>
+#include <mach/pxa-regs.h>
+#include <mach/pxa2xx-regs.h>
+#include <mach/pxafb.h>
+#include <mach/i2c.h>
+#include <mach/mmc.h>
+#include <mach/irda.h>
+#include <mach/ohci.h>
 
 #include "devices.h"
 #include "generic.h"
diff --git a/arch/arm/mach-pxa/mainstone.c b/arch/arm/mach-pxa/mainstone.c
index 851ec2d9b699..d44af761564d 100644
--- a/arch/arm/mach-pxa/mainstone.c
+++ b/arch/arm/mach-pxa/mainstone.c
@@ -32,7 +32,7 @@
 #include <asm/setup.h>
 #include <asm/memory.h>
 #include <asm/mach-types.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/irq.h>
 #include <asm/sizes.h>
 
@@ -41,17 +41,17 @@
 #include <asm/mach/irq.h>
 #include <asm/mach/flash.h>
 
-#include <asm/arch/pxa-regs.h>
-#include <asm/arch/pxa2xx-regs.h>
-#include <asm/arch/mfp-pxa27x.h>
-#include <asm/arch/mainstone.h>
-#include <asm/arch/audio.h>
-#include <asm/arch/pxafb.h>
-#include <asm/arch/i2c.h>
-#include <asm/arch/mmc.h>
-#include <asm/arch/irda.h>
-#include <asm/arch/ohci.h>
-#include <asm/arch/pxa27x_keypad.h>
+#include <mach/pxa-regs.h>
+#include <mach/pxa2xx-regs.h>
+#include <mach/mfp-pxa27x.h>
+#include <mach/mainstone.h>
+#include <mach/audio.h>
+#include <mach/pxafb.h>
+#include <mach/i2c.h>
+#include <mach/mmc.h>
+#include <mach/irda.h>
+#include <mach/ohci.h>
+#include <mach/pxa27x_keypad.h>
 
 #include "generic.h"
 #include "devices.h"
@@ -191,7 +191,7 @@ static void __init mainstone_init_irq(void)
 	MST_INTSETCLR = 0;
 
 	set_irq_chained_handler(IRQ_GPIO(0), mainstone_irq_handler);
-	set_irq_type(IRQ_GPIO(0), IRQT_FALLING);
+	set_irq_type(IRQ_GPIO(0), IRQ_TYPE_EDGE_FALLING);
 }
 
 #ifdef CONFIG_PM
diff --git a/arch/arm/mach-pxa/mfp-pxa2xx.c b/arch/arm/mach-pxa/mfp-pxa2xx.c
index fd4545eab803..925575f10acf 100644
--- a/arch/arm/mach-pxa/mfp-pxa2xx.c
+++ b/arch/arm/mach-pxa/mfp-pxa2xx.c
@@ -18,10 +18,10 @@
 #include <linux/init.h>
 #include <linux/sysdev.h>
 
-#include <asm/arch/hardware.h>
-#include <asm/arch/pxa-regs.h>
-#include <asm/arch/pxa2xx-regs.h>
-#include <asm/arch/mfp-pxa2xx.h>
+#include <mach/hardware.h>
+#include <mach/pxa-regs.h>
+#include <mach/pxa2xx-regs.h>
+#include <mach/mfp-pxa2xx.h>
 
 #include "generic.h"
 
diff --git a/arch/arm/mach-pxa/mfp-pxa3xx.c b/arch/arm/mach-pxa/mfp-pxa3xx.c
index 3a5b0fcbaf1f..eb197a6e8e94 100644
--- a/arch/arm/mach-pxa/mfp-pxa3xx.c
+++ b/arch/arm/mach-pxa/mfp-pxa3xx.c
@@ -19,10 +19,10 @@
 #include <linux/io.h>
 #include <linux/sysdev.h>
 
-#include <asm/hardware.h>
-#include <asm/arch/mfp.h>
-#include <asm/arch/mfp-pxa3xx.h>
-#include <asm/arch/pxa3xx-regs.h>
+#include <mach/hardware.h>
+#include <mach/mfp.h>
+#include <mach/mfp-pxa3xx.h>
+#include <mach/pxa3xx-regs.h>
 
 /* mfp_spin_lock is used to ensure that MFP register configuration
  * (most likely a read-modify-write operation) is atomic, and that
diff --git a/arch/arm/mach-pxa/palmtx.c b/arch/arm/mach-pxa/palmtx.c
index 408657a24f8c..fe924a23debe 100644
--- a/arch/arm/mach-pxa/palmtx.c
+++ b/arch/arm/mach-pxa/palmtx.c
@@ -30,15 +30,15 @@
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 
-#include <asm/arch/audio.h>
-#include <asm/arch/palmtx.h>
-#include <asm/arch/mmc.h>
-#include <asm/arch/pxafb.h>
-#include <asm/arch/pxa-regs.h>
-#include <asm/arch/mfp-pxa27x.h>
-#include <asm/arch/irda.h>
-#include <asm/arch/pxa27x_keypad.h>
-#include <asm/arch/udc.h>
+#include <mach/audio.h>
+#include <mach/palmtx.h>
+#include <mach/mmc.h>
+#include <mach/pxafb.h>
+#include <mach/pxa-regs.h>
+#include <mach/mfp-pxa27x.h>
+#include <mach/irda.h>
+#include <mach/pxa27x_keypad.h>
+#include <mach/udc.h>
 
 #include "generic.h"
 #include "devices.h"
diff --git a/arch/arm/mach-pxa/pcm027.c b/arch/arm/mach-pxa/pcm027.c
index 377f3be8ce57..730b9f6ede1d 100644
--- a/arch/arm/mach-pxa/pcm027.c
+++ b/arch/arm/mach-pxa/pcm027.c
@@ -29,12 +29,12 @@
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
-#include <asm/arch/hardware.h>
-#include <asm/arch/pxa-regs.h>
-#include <asm/arch/pxa2xx-gpio.h>
-#include <asm/arch/pxa2xx-regs.h>
-#include <asm/arch/pxa2xx_spi.h>
-#include <asm/arch/pcm027.h>
+#include <mach/hardware.h>
+#include <mach/pxa-regs.h>
+#include <mach/pxa2xx-gpio.h>
+#include <mach/pxa2xx-regs.h>
+#include <mach/pxa2xx_spi.h>
+#include <mach/pcm027.h>
 #include "generic.h"
 
 /*
diff --git a/arch/arm/mach-pxa/pcm990-baseboard.c b/arch/arm/mach-pxa/pcm990-baseboard.c
index 30023b00e476..420c9b3813f6 100644
--- a/arch/arm/mach-pxa/pcm990-baseboard.c
+++ b/arch/arm/mach-pxa/pcm990-baseboard.c
@@ -22,23 +22,22 @@
 
 #include <linux/irq.h>
 #include <linux/platform_device.h>
-#include <linux/ide.h>
 #include <linux/i2c.h>
 #include <linux/pwm_backlight.h>
 
 #include <media/soc_camera.h>
 
 #include <asm/gpio.h>
-#include <asm/arch/i2c.h>
-#include <asm/arch/camera.h>
+#include <mach/i2c.h>
+#include <mach/camera.h>
 #include <asm/mach/map.h>
-#include <asm/arch/pxa-regs.h>
-#include <asm/arch/audio.h>
-#include <asm/arch/mmc.h>
-#include <asm/arch/ohci.h>
-#include <asm/arch/pcm990_baseboard.h>
-#include <asm/arch/pxafb.h>
-#include <asm/arch/mfp-pxa27x.h>
+#include <mach/pxa-regs.h>
+#include <mach/audio.h>
+#include <mach/mmc.h>
+#include <mach/ohci.h>
+#include <mach/pcm990_baseboard.h>
+#include <mach/pxafb.h>
+#include <mach/mfp-pxa27x.h>
 
 #include "devices.h"
 #include "generic.h"
diff --git a/arch/arm/mach-pxa/pm.c b/arch/arm/mach-pxa/pm.c
index 7d4debbdcca3..1b539e675579 100644
--- a/arch/arm/mach-pxa/pm.c
+++ b/arch/arm/mach-pxa/pm.c
@@ -16,12 +16,12 @@
 #include <linux/errno.h>
 #include <linux/time.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/memory.h>
 #include <asm/system.h>
-#include <asm/arch/pm.h>
-#include <asm/arch/pxa-regs.h>
-#include <asm/arch/lubbock.h>
+#include <mach/pm.h>
+#include <mach/pxa-regs.h>
+#include <mach/lubbock.h>
 #include <asm/mach/time.h>
 
 struct pxa_cpu_pm_fns *pxa_cpu_pm_fns;
diff --git a/arch/arm/mach-pxa/poodle.c b/arch/arm/mach-pxa/poodle.c
index 39612cfa0b4d..3f5f484549b3 100644
--- a/arch/arm/mach-pxa/poodle.c
+++ b/arch/arm/mach-pxa/poodle.c
@@ -21,7 +21,7 @@
 #include <linux/pm.h>
 #include <linux/delay.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/irq.h>
 #include <asm/setup.h>
@@ -31,16 +31,17 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
-#include <asm/arch/pxa-regs.h>
-#include <asm/arch/pxa2xx-regs.h>
-#include <asm/arch/pxa2xx-gpio.h>
-#include <asm/arch/mmc.h>
-#include <asm/arch/udc.h>
-#include <asm/arch/irda.h>
-#include <asm/arch/poodle.h>
-#include <asm/arch/pxafb.h>
-#include <asm/arch/sharpsl.h>
-#include <asm/arch/ssp.h>
+#include <mach/pxa-regs.h>
+#include <mach/pxa2xx-regs.h>
+#include <mach/pxa2xx-gpio.h>
+#include <mach/mmc.h>
+#include <mach/udc.h>
+#include <mach/i2c.h>
+#include <mach/irda.h>
+#include <mach/poodle.h>
+#include <mach/pxafb.h>
+#include <mach/sharpsl.h>
+#include <mach/ssp.h>
 
 #include <asm/hardware/scoop.h>
 #include <asm/hardware/locomo.h>
@@ -387,6 +388,7 @@ static void __init poodle_init(void)
 	pxa_set_udc_info(&udc_info);
 	pxa_set_mci_info(&poodle_mci_platform_data);
 	pxa_set_ficp_info(&poodle_ficp_platform_data);
+	pxa_set_i2c_info(NULL);
 
 	platform_scoop_config = &poodle_pcmcia_config;
 
diff --git a/arch/arm/mach-pxa/pwm.c b/arch/arm/mach-pxa/pwm.c
index ce28cd9fed16..316cd986da5c 100644
--- a/arch/arm/mach-pxa/pwm.c
+++ b/arch/arm/mach-pxa/pwm.c
@@ -20,7 +20,7 @@
 #include <linux/pwm.h>
 
 #include <asm/div64.h>
-#include <asm/arch/pxa-regs.h>
+#include <mach/pxa-regs.h>
 
 /* PWM registers and bits definitions */
 #define PWMCR		(0x00)
diff --git a/arch/arm/mach-pxa/pxa25x.c b/arch/arm/mach-pxa/pxa25x.c
index c5b845b935bb..305452b56e91 100644
--- a/arch/arm/mach-pxa/pxa25x.c
+++ b/arch/arm/mach-pxa/pxa25x.c
@@ -23,13 +23,14 @@
 #include <linux/suspend.h>
 #include <linux/sysdev.h>
 
-#include <asm/hardware.h>
-#include <asm/arch/irqs.h>
-#include <asm/arch/pxa-regs.h>
-#include <asm/arch/pxa2xx-regs.h>
-#include <asm/arch/mfp-pxa25x.h>
-#include <asm/arch/pm.h>
-#include <asm/arch/dma.h>
+#include <mach/hardware.h>
+#include <mach/irqs.h>
+#include <mach/pxa-regs.h>
+#include <mach/pxa2xx-regs.h>
+#include <mach/mfp-pxa25x.h>
+#include <mach/reset.h>
+#include <mach/pm.h>
+#include <mach/dma.h>
 
 #include "generic.h"
 #include "devices.h"
@@ -165,8 +166,7 @@ static struct clk pxa25x_hwuart_clk =
 ;
 
 /*
- * PXA 2xx clock declarations. Order is important (see aliases below)
- * Please be careful not to disrupt the ordering.
+ * PXA 2xx clock declarations.
  */
 static struct clk pxa25x_clks[] = {
 	INIT_CK("LCDCLK", LCD, &clk_pxa25x_lcd_ops, &pxa_device_fb.dev),
@@ -193,11 +193,6 @@ static struct clk pxa25x_clks[] = {
 	INIT_CKEN("FICPCLK", FICP, 47923000, 0, NULL),
 };
 
-static struct clk pxa2xx_clk_aliases[] = {
-	INIT_CKOTHER("GPIO7_CLK", &pxa25x_clks[4], NULL),
-	INIT_CKOTHER("SA1111_CLK", &pxa25x_clks[5], NULL),
-};
-
 #ifdef CONFIG_PM
 
 #define SAVE(x)		sleep_save[SLEEP_SAVE_##x] = x
@@ -348,6 +343,9 @@ static int __init pxa25x_init(void)
 		clks_register(&pxa25x_hwuart_clk, 1);
 
 	if (cpu_is_pxa21x() || cpu_is_pxa25x()) {
+
+		reset_status = RCSR;
+
 		clks_register(pxa25x_clks, ARRAY_SIZE(pxa25x_clks));
 
 		if ((ret = pxa_init_dma(16)))
@@ -371,8 +369,6 @@ static int __init pxa25x_init(void)
 	if (cpu_is_pxa255())
 		ret = platform_device_register(&pxa_device_hwuart);
 
-	clks_register(pxa2xx_clk_aliases, ARRAY_SIZE(pxa2xx_clk_aliases));
-
 	return ret;
 }
 
diff --git a/arch/arm/mach-pxa/pxa27x.c b/arch/arm/mach-pxa/pxa27x.c
index d5d14ea33f27..f9f6a9c31f4b 100644
--- a/arch/arm/mach-pxa/pxa27x.c
+++ b/arch/arm/mach-pxa/pxa27x.c
@@ -18,16 +18,17 @@
 #include <linux/platform_device.h>
 #include <linux/sysdev.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/irq.h>
-#include <asm/arch/irqs.h>
-#include <asm/arch/pxa-regs.h>
-#include <asm/arch/pxa2xx-regs.h>
-#include <asm/arch/mfp-pxa27x.h>
-#include <asm/arch/ohci.h>
-#include <asm/arch/pm.h>
-#include <asm/arch/dma.h>
-#include <asm/arch/i2c.h>
+#include <mach/irqs.h>
+#include <mach/pxa-regs.h>
+#include <mach/pxa2xx-regs.h>
+#include <mach/mfp-pxa27x.h>
+#include <mach/reset.h>
+#include <mach/ohci.h>
+#include <mach/pm.h>
+#include <mach/dma.h>
+#include <mach/i2c.h>
 
 #include "generic.h"
 #include "devices.h"
@@ -384,6 +385,9 @@ static int __init pxa27x_init(void)
 	int i, ret = 0;
 
 	if (cpu_is_pxa27x()) {
+
+		reset_status = RCSR;
+
 		clks_register(pxa27x_clks, ARRAY_SIZE(pxa27x_clks));
 
 		if ((ret = pxa_init_dma(32)))
diff --git a/arch/arm/mach-pxa/pxa2xx.c b/arch/arm/mach-pxa/pxa2xx.c
index d4f6415e8413..73d04d81c75a 100644
--- a/arch/arm/mach-pxa/pxa2xx.c
+++ b/arch/arm/mach-pxa/pxa2xx.c
@@ -14,9 +14,18 @@
 #include <linux/kernel.h>
 #include <linux/device.h>
 
-#include <asm/arch/mfp-pxa2xx.h>
-#include <asm/arch/mfp-pxa25x.h>
-#include <asm/arch/irda.h>
+#include <mach/hardware.h>
+#include <mach/pxa2xx-regs.h>
+#include <mach/mfp-pxa2xx.h>
+#include <mach/mfp-pxa25x.h>
+#include <mach/reset.h>
+#include <mach/irda.h>
+
+void pxa2xx_clear_reset_status(unsigned int mask)
+{
+	/* RESET_STATUS_* has a 1:1 mapping with RCSR */
+	RCSR = mask;
+}
 
 static unsigned long pxa2xx_mfp_fir[] = {
 	GPIO46_FICP_RXD,
diff --git a/arch/arm/mach-pxa/pxa300.c b/arch/arm/mach-pxa/pxa300.c
index da92e9733886..9adc7fc4618a 100644
--- a/arch/arm/mach-pxa/pxa300.c
+++ b/arch/arm/mach-pxa/pxa300.c
@@ -17,9 +17,9 @@
 #include <linux/kernel.h>
 #include <linux/platform_device.h>
 
-#include <asm/hardware.h>
-#include <asm/arch/pxa3xx-regs.h>
-#include <asm/arch/mfp-pxa300.h>
+#include <mach/hardware.h>
+#include <mach/pxa3xx-regs.h>
+#include <mach/mfp-pxa300.h>
 
 #include "generic.h"
 #include "devices.h"
@@ -90,7 +90,9 @@ static struct clk common_clks[] = {
 };
 
 static struct clk pxa310_clks[] = {
+#ifdef CONFIG_CPU_PXA310
 	PXA3xx_CKEN("MMCCLK", MMC3, 19500000, 0, &pxa3xx_device_mci3.dev),
+#endif
 };
 
 static int __init pxa300_init(void)
diff --git a/arch/arm/mach-pxa/pxa320.c b/arch/arm/mach-pxa/pxa320.c
index c557c23a1efe..016eb18f01a3 100644
--- a/arch/arm/mach-pxa/pxa320.c
+++ b/arch/arm/mach-pxa/pxa320.c
@@ -17,10 +17,10 @@
 #include <linux/kernel.h>
 #include <linux/platform_device.h>
 
-#include <asm/hardware.h>
-#include <asm/arch/mfp.h>
-#include <asm/arch/pxa3xx-regs.h>
-#include <asm/arch/mfp-pxa320.h>
+#include <mach/hardware.h>
+#include <mach/mfp.h>
+#include <mach/pxa3xx-regs.h>
+#include <mach/mfp-pxa320.h>
 
 #include "generic.h"
 #include "devices.h"
diff --git a/arch/arm/mach-pxa/pxa3xx.c b/arch/arm/mach-pxa/pxa3xx.c
index f491025a0c82..03cbc38103ed 100644
--- a/arch/arm/mach-pxa/pxa3xx.c
+++ b/arch/arm/mach-pxa/pxa3xx.c
@@ -22,12 +22,13 @@
 #include <linux/io.h>
 #include <linux/sysdev.h>
 
-#include <asm/hardware.h>
-#include <asm/arch/pxa3xx-regs.h>
-#include <asm/arch/ohci.h>
-#include <asm/arch/pm.h>
-#include <asm/arch/dma.h>
-#include <asm/arch/ssp.h>
+#include <mach/hardware.h>
+#include <mach/pxa3xx-regs.h>
+#include <mach/reset.h>
+#include <mach/ohci.h>
+#include <mach/pm.h>
+#include <mach/dma.h>
+#include <mach/ssp.h>
 
 #include "generic.h"
 #include "devices.h"
@@ -109,6 +110,12 @@ unsigned int pxa3xx_get_memclk_frequency_10khz(void)
 	return (clk / 10000);
 }
 
+void pxa3xx_clear_reset_status(unsigned int mask)
+{
+	/* RESET_STATUS_* has a 1:1 mapping with ARSR */
+	ARSR = mask;
+}
+
 /*
  * Return the current AC97 clock frequency.
  */
@@ -532,6 +539,9 @@ static int __init pxa3xx_init(void)
 	int i, ret = 0;
 
 	if (cpu_is_pxa3xx()) {
+
+		reset_status = ARSR;
+
 		/*
 		 * clear RDH bit every time after reset
 		 *
diff --git a/arch/arm/mach-pxa/pxa930.c b/arch/arm/mach-pxa/pxa930.c
index 9503897d049c..13e6bfdfff60 100644
--- a/arch/arm/mach-pxa/pxa930.c
+++ b/arch/arm/mach-pxa/pxa930.c
@@ -16,8 +16,8 @@
 #include <linux/irq.h>
 #include <linux/dma-mapping.h>
 
-#include <asm/hardware.h>
-#include <asm/arch/mfp-pxa930.h>
+#include <mach/hardware.h>
+#include <mach/mfp-pxa930.h>
 
 static struct pxa3xx_mfp_addr_map pxa930_mfp_addr_map[] __initdata = {
 
diff --git a/arch/arm/mach-pxa/reset.c b/arch/arm/mach-pxa/reset.c
index 9d39dea57ce2..9996c612c3d6 100644
--- a/arch/arm/mach-pxa/reset.c
+++ b/arch/arm/mach-pxa/reset.c
@@ -10,8 +10,11 @@
 #include <asm/io.h>
 #include <asm/proc-fns.h>
 
-#include <asm/arch/pxa-regs.h>
-#include <asm/arch/pxa2xx-regs.h>
+#include <mach/pxa-regs.h>
+#include <mach/reset.h>
+
+unsigned int reset_status;
+EXPORT_SYMBOL(reset_status);
 
 static void do_hw_reset(void);
 
@@ -77,8 +80,7 @@ static void do_hw_reset(void)
 
 void arch_reset(char mode)
 {
-	if (cpu_is_pxa2xx())
-		RCSR = RCSR_HWR | RCSR_WDR | RCSR_SMR | RCSR_GPR;
+	clear_reset_status(RESET_STATUS_ALL);
 
 	switch (mode) {
 	case 's':
diff --git a/arch/arm/mach-pxa/saar.c b/arch/arm/mach-pxa/saar.c
index d02bc6f8bb93..e7ea91ce7f02 100644
--- a/arch/arm/mach-pxa/saar.c
+++ b/arch/arm/mach-pxa/saar.c
@@ -21,9 +21,9 @@
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
-#include <asm/hardware.h>
-#include <asm/arch/pxa3xx-regs.h>
-#include <asm/arch/mfp-pxa930.h>
+#include <mach/hardware.h>
+#include <mach/pxa3xx-regs.h>
+#include <mach/mfp-pxa930.h>
 
 #include "devices.h"
 #include "generic.h"
diff --git a/arch/arm/mach-pxa/sharpsl_pm.c b/arch/arm/mach-pxa/sharpsl_pm.c
index 34cd585075b0..e804ae09370c 100644
--- a/arch/arm/mach-pxa/sharpsl_pm.c
+++ b/arch/arm/mach-pxa/sharpsl_pm.c
@@ -22,12 +22,12 @@
 #include <linux/platform_device.h>
 #include <linux/apm-emulation.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/mach-types.h>
-#include <asm/arch/pm.h>
-#include <asm/arch/pxa-regs.h>
-#include <asm/arch/pxa2xx-gpio.h>
-#include <asm/arch/sharpsl.h>
+#include <mach/pm.h>
+#include <mach/pxa-regs.h>
+#include <mach/pxa2xx-gpio.h>
+#include <mach/sharpsl.h>
 #include "sharpsl.h"
 
 struct battery_thresh spitz_battery_levels_acin[] = {
@@ -146,18 +146,18 @@ void sharpsl_pm_pxa_init(void)
 	if (request_irq(IRQ_GPIO(sharpsl_pm.machinfo->gpio_acin), sharpsl_ac_isr, IRQF_DISABLED, "AC Input Detect", sharpsl_ac_isr)) {
 		dev_err(sharpsl_pm.dev, "Could not get irq %d.\n", IRQ_GPIO(sharpsl_pm.machinfo->gpio_acin));
 	}
-	else set_irq_type(IRQ_GPIO(sharpsl_pm.machinfo->gpio_acin),IRQT_BOTHEDGE);
+	else set_irq_type(IRQ_GPIO(sharpsl_pm.machinfo->gpio_acin),IRQ_TYPE_EDGE_BOTH);
 
 	if (request_irq(IRQ_GPIO(sharpsl_pm.machinfo->gpio_batlock), sharpsl_fatal_isr, IRQF_DISABLED, "Battery Cover", sharpsl_fatal_isr)) {
 		dev_err(sharpsl_pm.dev, "Could not get irq %d.\n", IRQ_GPIO(sharpsl_pm.machinfo->gpio_batlock));
 	}
-	else set_irq_type(IRQ_GPIO(sharpsl_pm.machinfo->gpio_batlock),IRQT_FALLING);
+	else set_irq_type(IRQ_GPIO(sharpsl_pm.machinfo->gpio_batlock),IRQ_TYPE_EDGE_FALLING);
 
 	if (sharpsl_pm.machinfo->gpio_fatal) {
 		if (request_irq(IRQ_GPIO(sharpsl_pm.machinfo->gpio_fatal), sharpsl_fatal_isr, IRQF_DISABLED, "Fatal Battery", sharpsl_fatal_isr)) {
 			dev_err(sharpsl_pm.dev, "Could not get irq %d.\n", IRQ_GPIO(sharpsl_pm.machinfo->gpio_fatal));
 		}
-		else set_irq_type(IRQ_GPIO(sharpsl_pm.machinfo->gpio_fatal),IRQT_FALLING);
+		else set_irq_type(IRQ_GPIO(sharpsl_pm.machinfo->gpio_fatal),IRQ_TYPE_EDGE_FALLING);
 	}
 
 	if (sharpsl_pm.machinfo->batfull_irq)
@@ -166,7 +166,7 @@ void sharpsl_pm_pxa_init(void)
 		if (request_irq(IRQ_GPIO(sharpsl_pm.machinfo->gpio_batfull), sharpsl_chrg_full_isr, IRQF_DISABLED, "CO", sharpsl_chrg_full_isr)) {
 			dev_err(sharpsl_pm.dev, "Could not get irq %d.\n", IRQ_GPIO(sharpsl_pm.machinfo->gpio_batfull));
 		}
-		else set_irq_type(IRQ_GPIO(sharpsl_pm.machinfo->gpio_batfull),IRQT_RISING);
+		else set_irq_type(IRQ_GPIO(sharpsl_pm.machinfo->gpio_batfull),IRQ_TYPE_EDGE_RISING);
 	}
 }
 
diff --git a/arch/arm/mach-pxa/sleep.S b/arch/arm/mach-pxa/sleep.S
index 784716eb7fc5..a62c8375eb53 100644
--- a/arch/arm/mach-pxa/sleep.S
+++ b/arch/arm/mach-pxa/sleep.S
@@ -13,10 +13,10 @@
 
 #include <linux/linkage.h>
 #include <asm/assembler.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 
-#include <asm/arch/pxa-regs.h>
-#include <asm/arch/pxa2xx-regs.h>
+#include <mach/pxa-regs.h>
+#include <mach/pxa2xx-regs.h>
 
 #define MDREFR_KDIV	0x200a4000	// all banks
 #define CCCR_SLEEP	0x00000107	// L=7 2N=2 A=0 PPDIS=0 CPDIS=0
diff --git a/arch/arm/mach-pxa/spitz.c b/arch/arm/mach-pxa/spitz.c
index 762249c03ded..b569f3b4cf3a 100644
--- a/arch/arm/mach-pxa/spitz.c
+++ b/arch/arm/mach-pxa/spitz.c
@@ -26,7 +26,7 @@
 #include <asm/setup.h>
 #include <asm/memory.h>
 #include <asm/mach-types.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/irq.h>
 #include <asm/io.h>
 #include <asm/system.h>
@@ -35,18 +35,20 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
-#include <asm/arch/pxa-regs.h>
-#include <asm/arch/pxa2xx-regs.h>
-#include <asm/arch/pxa2xx-gpio.h>
-#include <asm/arch/pxa27x-udc.h>
-#include <asm/arch/irda.h>
-#include <asm/arch/mmc.h>
-#include <asm/arch/ohci.h>
-#include <asm/arch/udc.h>
-#include <asm/arch/pxafb.h>
-#include <asm/arch/akita.h>
-#include <asm/arch/spitz.h>
-#include <asm/arch/sharpsl.h>
+#include <mach/pxa-regs.h>
+#include <mach/pxa2xx-regs.h>
+#include <mach/pxa2xx-gpio.h>
+#include <mach/pxa27x-udc.h>
+#include <mach/reset.h>
+#include <mach/i2c.h>
+#include <mach/irda.h>
+#include <mach/mmc.h>
+#include <mach/ohci.h>
+#include <mach/udc.h>
+#include <mach/pxafb.h>
+#include <mach/akita.h>
+#include <mach/spitz.h>
+#include <mach/sharpsl.h>
 
 #include <asm/mach/sharpsl_param.h>
 #include <asm/hardware/scoop.h>
@@ -573,6 +575,7 @@ static void __init common_init(void)
 	pxa_set_ficp_info(&spitz_ficp_platform_data);
 	set_pxa_fb_parent(&spitzssp_device.dev);
 	set_pxa_fb_info(&spitz_pxafb_info);
+	pxa_set_i2c_info(NULL);
 }
 
 #if defined(CONFIG_MACH_SPITZ) || defined(CONFIG_MACH_BORZOI)
diff --git a/arch/arm/mach-pxa/spitz_pm.c b/arch/arm/mach-pxa/spitz_pm.c
index 360354084ae4..8a40505dfd28 100644
--- a/arch/arm/mach-pxa/spitz_pm.c
+++ b/arch/arm/mach-pxa/spitz_pm.c
@@ -20,14 +20,14 @@
 
 #include <asm/irq.h>
 #include <asm/mach-types.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/hardware/scoop.h>
 
-#include <asm/arch/sharpsl.h>
-#include <asm/arch/spitz.h>
-#include <asm/arch/pxa-regs.h>
-#include <asm/arch/pxa2xx-regs.h>
-#include <asm/arch/pxa2xx-gpio.h>
+#include <mach/sharpsl.h>
+#include <mach/spitz.h>
+#include <mach/pxa-regs.h>
+#include <mach/pxa2xx-regs.h>
+#include <mach/pxa2xx-gpio.h>
 #include "sharpsl.h"
 
 #define SHARPSL_CHARGE_ON_VOLT         0x99  /* 2.9V */
diff --git a/arch/arm/mach-pxa/ssp.c b/arch/arm/mach-pxa/ssp.c
index 89f38683787e..9bd93c5f28b2 100644
--- a/arch/arm/mach-pxa/ssp.c
+++ b/arch/arm/mach-pxa/ssp.c
@@ -31,10 +31,10 @@
 
 #include <asm/io.h>
 #include <asm/irq.h>
-#include <asm/hardware.h>
-#include <asm/arch/ssp.h>
-#include <asm/arch/pxa-regs.h>
-#include <asm/arch/regs-ssp.h>
+#include <mach/hardware.h>
+#include <mach/ssp.h>
+#include <mach/pxa-regs.h>
+#include <mach/regs-ssp.h>
 
 #define TIMEOUT 100000
 
diff --git a/arch/arm/mach-pxa/standby.S b/arch/arm/mach-pxa/standby.S
index 40bb70eff3fe..f3821cfda72f 100644
--- a/arch/arm/mach-pxa/standby.S
+++ b/arch/arm/mach-pxa/standby.S
@@ -11,10 +11,10 @@
 
 #include <linux/linkage.h>
 #include <asm/assembler.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 
-#include <asm/arch/pxa-regs.h>
-#include <asm/arch/pxa2xx-regs.h>
+#include <mach/pxa-regs.h>
+#include <mach/pxa2xx-regs.h>
 
 		.text
 
diff --git a/arch/arm/mach-pxa/tavorevb.c b/arch/arm/mach-pxa/tavorevb.c
index ac283507e423..589d32b4fc46 100644
--- a/arch/arm/mach-pxa/tavorevb.c
+++ b/arch/arm/mach-pxa/tavorevb.c
@@ -21,9 +21,9 @@
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
-#include <asm/hardware.h>
-#include <asm/arch/pxa3xx-regs.h>
-#include <asm/arch/mfp-pxa930.h>
+#include <mach/hardware.h>
+#include <mach/pxa3xx-regs.h>
+#include <mach/mfp-pxa930.h>
 
 #include "devices.h"
 #include "generic.h"
diff --git a/arch/arm/mach-pxa/time.c b/arch/arm/mach-pxa/time.c
index 7b7c0179795b..67e18509d7bf 100644
--- a/arch/arm/mach-pxa/time.c
+++ b/arch/arm/mach-pxa/time.c
@@ -22,7 +22,7 @@
 #include <asm/cnt32_to_63.h>
 #include <asm/mach/irq.h>
 #include <asm/mach/time.h>
-#include <asm/arch/pxa-regs.h>
+#include <mach/pxa-regs.h>
 #include <asm/mach-types.h>
 
 /*
diff --git a/arch/arm/mach-pxa/tosa-bt.c b/arch/arm/mach-pxa/tosa-bt.c
index 7d8505466e54..fb0294bd4310 100644
--- a/arch/arm/mach-pxa/tosa-bt.c
+++ b/arch/arm/mach-pxa/tosa-bt.c
@@ -16,7 +16,7 @@
 #include <linux/delay.h>
 #include <linux/rfkill.h>
 
-#include <asm/arch/tosa_bt.h>
+#include <mach/tosa_bt.h>
 
 static void tosa_bt_on(struct tosa_bt_data *data)
 {
diff --git a/arch/arm/mach-pxa/tosa.c b/arch/arm/mach-pxa/tosa.c
index fea17ce6b55f..5dab30eafddc 100644
--- a/arch/arm/mach-pxa/tosa.c
+++ b/arch/arm/mach-pxa/tosa.c
@@ -34,16 +34,17 @@
 
 #include <asm/setup.h>
 #include <asm/mach-types.h>
-#include <asm/arch/pxa2xx-regs.h>
-#include <asm/arch/mfp-pxa25x.h>
-#include <asm/arch/irda.h>
-#include <asm/arch/i2c.h>
-#include <asm/arch/mmc.h>
-#include <asm/arch/udc.h>
-#include <asm/arch/tosa_bt.h>
+#include <mach/pxa2xx-regs.h>
+#include <mach/mfp-pxa25x.h>
+#include <mach/reset.h>
+#include <mach/irda.h>
+#include <mach/i2c.h>
+#include <mach/mmc.h>
+#include <mach/udc.h>
+#include <mach/tosa_bt.h>
 
 #include <asm/mach/arch.h>
-#include <asm/arch/tosa.h>
+#include <mach/tosa.h>
 
 #include <asm/hardware/scoop.h>
 #include <asm/mach/sharpsl_param.h>
diff --git a/arch/arm/mach-pxa/trizeps4.c b/arch/arm/mach-pxa/trizeps4.c
index dee7bf36f013..3ed757e6bcc8 100644
--- a/arch/arm/mach-pxa/trizeps4.c
+++ b/arch/arm/mach-pxa/trizeps4.c
@@ -31,7 +31,7 @@
 #include <asm/setup.h>
 #include <asm/memory.h>
 #include <asm/mach-types.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/irq.h>
 #include <asm/sizes.h>
 
@@ -40,15 +40,15 @@
 #include <asm/mach/irq.h>
 #include <asm/mach/flash.h>
 
-#include <asm/arch/pxa-regs.h>
-#include <asm/arch/pxa2xx-regs.h>
-#include <asm/arch/pxa2xx-gpio.h>
-#include <asm/arch/trizeps4.h>
-#include <asm/arch/audio.h>
-#include <asm/arch/pxafb.h>
-#include <asm/arch/mmc.h>
-#include <asm/arch/irda.h>
-#include <asm/arch/ohci.h>
+#include <mach/pxa-regs.h>
+#include <mach/pxa2xx-regs.h>
+#include <mach/pxa2xx-gpio.h>
+#include <mach/trizeps4.h>
+#include <mach/audio.h>
+#include <mach/pxafb.h>
+#include <mach/mmc.h>
+#include <mach/irda.h>
+#include <mach/ohci.h>
 
 #include "generic.h"
 #include "devices.h"
@@ -122,7 +122,7 @@ static struct resource dm9000_resources[] = {
 	[2] = {
 		.start	= TRIZEPS4_ETH_IRQ,
 		.end	= TRIZEPS4_ETH_IRQ,
-		.flags	= (IORESOURCE_IRQ | IRQT_RISING),
+		.flags	= (IORESOURCE_IRQ | IRQ_TYPE_EDGE_RISING),
 	},
 };
 
diff --git a/arch/arm/mach-pxa/zylonite.c b/arch/arm/mach-pxa/zylonite.c
index 8fca6d890b7d..0cb65b5772fe 100644
--- a/arch/arm/mach-pxa/zylonite.c
+++ b/arch/arm/mach-pxa/zylonite.c
@@ -23,14 +23,14 @@
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
-#include <asm/hardware.h>
-#include <asm/arch/audio.h>
-#include <asm/arch/gpio.h>
-#include <asm/arch/pxafb.h>
-#include <asm/arch/zylonite.h>
-#include <asm/arch/mmc.h>
-#include <asm/arch/pxa27x_keypad.h>
-#include <asm/arch/pxa3xx_nand.h>
+#include <mach/hardware.h>
+#include <mach/audio.h>
+#include <mach/gpio.h>
+#include <mach/pxafb.h>
+#include <mach/zylonite.h>
+#include <mach/mmc.h>
+#include <mach/pxa27x_keypad.h>
+#include <mach/pxa3xx_nand.h>
 
 #include "devices.h"
 #include "generic.h"
diff --git a/arch/arm/mach-pxa/zylonite_pxa300.c b/arch/arm/mach-pxa/zylonite_pxa300.c
index b28d46e081d3..095f5c648236 100644
--- a/arch/arm/mach-pxa/zylonite_pxa300.c
+++ b/arch/arm/mach-pxa/zylonite_pxa300.c
@@ -20,9 +20,9 @@
 #include <linux/i2c/pca953x.h>
 
 #include <asm/gpio.h>
-#include <asm/arch/mfp-pxa300.h>
-#include <asm/arch/i2c.h>
-#include <asm/arch/zylonite.h>
+#include <mach/mfp-pxa300.h>
+#include <mach/i2c.h>
+#include <mach/zylonite.h>
 
 #include "generic.h"
 
diff --git a/arch/arm/mach-pxa/zylonite_pxa320.c b/arch/arm/mach-pxa/zylonite_pxa320.c
index 2b7fba7a2921..9879d7da2df5 100644
--- a/arch/arm/mach-pxa/zylonite_pxa320.c
+++ b/arch/arm/mach-pxa/zylonite_pxa320.c
@@ -17,9 +17,9 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 
-#include <asm/arch/gpio.h>
-#include <asm/arch/mfp-pxa320.h>
-#include <asm/arch/zylonite.h>
+#include <mach/gpio.h>
+#include <mach/mfp-pxa320.h>
+#include <mach/zylonite.h>
 
 #include "generic.h"
 
diff --git a/arch/arm/mach-realview/core.c b/arch/arm/mach-realview/core.c
index 131990d196f5..4f9c84ab781c 100644
--- a/arch/arm/mach-realview/core.c
+++ b/arch/arm/mach-realview/core.c
@@ -29,7 +29,7 @@
 #include <linux/clockchips.h>
 
 #include <asm/system.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 #include <asm/irq.h>
 #include <asm/leds.h>
diff --git a/include/asm-arm/arch-realview/board-eb.h b/arch/arm/mach-realview/include/mach/board-eb.h
index 206f7a752882..8d699fd324d0 100644
--- a/include/asm-arm/arch-realview/board-eb.h
+++ b/arch/arm/mach-realview/include/mach/board-eb.h
@@ -1,5 +1,5 @@
 /*
- * include/asm-arm/arch-realview/board-eb.h
+ * arch/arm/mach-realview/include/mach/board-eb.h
  *
  * Copyright (C) 2007 ARM Limited
  *
@@ -21,7 +21,7 @@
 #ifndef __ASM_ARCH_BOARD_EB_H
 #define __ASM_ARCH_BOARD_EB_H
 
-#include <asm/arch/platform.h>
+#include <mach/platform.h>
 
 /*
  * RealView EB + ARM11MPCore peripheral addresses
diff --git a/include/asm-arm/arch-realview/board-pb1176.h b/arch/arm/mach-realview/include/mach/board-pb1176.h
index 48ce9c833705..858eea7b1adc 100644
--- a/include/asm-arm/arch-realview/board-pb1176.h
+++ b/arch/arm/mach-realview/include/mach/board-pb1176.h
@@ -1,5 +1,5 @@
 /*
- * include/asm-arm/arch-realview/board-pb1176.h
+ * arch/arm/mach-realview/include/mach/board-pb1176.h
  *
  * Copyright (C) 2008 ARM Limited
  *
@@ -21,7 +21,7 @@
 #ifndef __ASM_ARCH_BOARD_PB1176_H
 #define __ASM_ARCH_BOARD_PB1176_H
 
-#include <asm/arch/platform.h>
+#include <mach/platform.h>
 
 /*
  * Peripheral addresses
diff --git a/include/asm-arm/arch-realview/board-pb11mp.h b/arch/arm/mach-realview/include/mach/board-pb11mp.h
index a1294d915fa8..ecd80e58631e 100644
--- a/include/asm-arm/arch-realview/board-pb11mp.h
+++ b/arch/arm/mach-realview/include/mach/board-pb11mp.h
@@ -1,5 +1,5 @@
 /*
- * include/asm-arm/arch-realview/board-pb11mp.h
+ * arch/arm/mach-realview/include/mach/board-pb11mp.h
  *
  * Copyright (C) 2008 ARM Limited
  *
@@ -21,7 +21,7 @@
 #ifndef __ASM_ARCH_BOARD_PB11MP_H
 #define __ASM_ARCH_BOARD_PB11MP_H
 
-#include <asm/arch/platform.h>
+#include <mach/platform.h>
 
 /*
  * Peripheral addresses
diff --git a/arch/arm/mach-realview/include/mach/debug-macro.S b/arch/arm/mach-realview/include/mach/debug-macro.S
new file mode 100644
index 000000000000..7196bcadff0c
--- /dev/null
+++ b/arch/arm/mach-realview/include/mach/debug-macro.S
@@ -0,0 +1,22 @@
+/* arch/arm/mach-realview/include/mach/debug-macro.S
+ *
+ * Debugging macro include header
+ *
+ *  Copyright (C) 1994-1999 Russell King
+ *  Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+*/
+
+		.macro	addruart,rx
+		mrc	p15, 0, \rx, c1, c0
+		tst	\rx, #1			@ MMU enabled?
+		moveq	\rx,      #0x10000000
+		movne	\rx,      #0xf0000000	@ virtual base
+		orr	\rx, \rx, #0x00009000
+		.endm
+
+#include <asm/hardware/debug-pl01x.S>
diff --git a/arch/arm/mach-realview/include/mach/dma.h b/arch/arm/mach-realview/include/mach/dma.h
new file mode 100644
index 000000000000..f1a5a1a10952
--- /dev/null
+++ b/arch/arm/mach-realview/include/mach/dma.h
@@ -0,0 +1,20 @@
+/*
+ *  arch/arm/mach-realview/include/mach/dma.h
+ *
+ *  Copyright (C) 2003 ARM Limited.
+ *  Copyright (C) 1997,1998 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
diff --git a/arch/arm/mach-realview/include/mach/entry-macro.S b/arch/arm/mach-realview/include/mach/entry-macro.S
new file mode 100644
index 000000000000..340a5c276946
--- /dev/null
+++ b/arch/arm/mach-realview/include/mach/entry-macro.S
@@ -0,0 +1,81 @@
+/*
+ * arch/arm/mach-realview/include/mach/entry-macro.S
+ *
+ * Low-level IRQ helper macros for RealView platforms
+ *
+ * This file is licensed under  the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+#include <mach/hardware.h>
+#include <asm/hardware/gic.h>
+
+		.macro	disable_fiq
+		.endm
+
+		.macro  get_irqnr_preamble, base, tmp
+		ldr	\base, =gic_cpu_base_addr
+		ldr	\base, [\base]
+		.endm
+
+		.macro  arch_ret_to_user, tmp1, tmp2
+		.endm
+
+		/*
+		 * The interrupt numbering scheme is defined in the
+		 * interrupt controller spec.  To wit:
+		 *
+		 * Interrupts 0-15 are IPI
+		 * 16-28 are reserved
+		 * 29-31 are local.  We allow 30 to be used for the watchdog.
+		 * 32-1020 are global
+		 * 1021-1022 are reserved
+		 * 1023 is "spurious" (no interrupt)
+		 *
+		 * For now, we ignore all local interrupts so only return an interrupt if it's
+		 * between 30 and 1020.  The test_for_ipi routine below will pick up on IPIs.
+		 *
+		 * A simple read from the controller will tell us the number of the highest
+                 * priority enabled interrupt.  We then just need to check whether it is in the
+		 * valid range for an IRQ (30-1020 inclusive).
+		 */
+
+		.macro  get_irqnr_and_base, irqnr, irqstat, base, tmp
+
+		ldr     \irqstat, [\base, #GIC_CPU_INTACK] /* bits 12-10 = src CPU, 9-0 = int # */
+
+		ldr	\tmp, =1021
+
+		bic     \irqnr, \irqstat, #0x1c00
+
+		cmp     \irqnr, #29
+		cmpcc	\irqnr, \irqnr
+		cmpne	\irqnr, \tmp
+		cmpcs	\irqnr, \irqnr
+
+		.endm
+
+		/* We assume that irqstat (the raw value of the IRQ acknowledge
+		 * register) is preserved from the macro above.
+		 * If there is an IPI, we immediately signal end of interrupt on the
+		 * controller, since this requires the original irqstat value which
+		 * we won't easily be able to recreate later.
+		 */
+
+		.macro test_for_ipi, irqnr, irqstat, base, tmp
+		bic	\irqnr, \irqstat, #0x1c00
+		cmp	\irqnr, #16
+		strcc	\irqstat, [\base, #GIC_CPU_EOI]
+		cmpcs	\irqnr, \irqnr
+		.endm
+
+		/* As above, this assumes that irqstat and base are preserved.. */
+
+		.macro test_for_ltirq, irqnr, irqstat, base, tmp
+		bic	\irqnr, \irqstat, #0x1c00
+		mov 	\tmp, #0
+		cmp	\irqnr, #29
+		moveq	\tmp, #1
+		streq	\irqstat, [\base, #GIC_CPU_EOI]
+		cmp	\tmp, #0
+		.endm
diff --git a/arch/arm/mach-realview/include/mach/hardware.h b/arch/arm/mach-realview/include/mach/hardware.h
new file mode 100644
index 000000000000..79a93b3dfca9
--- /dev/null
+++ b/arch/arm/mach-realview/include/mach/hardware.h
@@ -0,0 +1,31 @@
+/*
+ *  arch/arm/mach-realview/include/mach/hardware.h
+ *
+ *  This file contains the hardware definitions of the RealView boards.
+ *
+ *  Copyright (C) 2003 ARM Limited.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#ifndef __ASM_ARCH_HARDWARE_H
+#define __ASM_ARCH_HARDWARE_H
+
+#include <asm/sizes.h>
+
+/* macro to get at IO space when running virtually */
+#define IO_ADDRESS(x)		(((x) & 0x0fffffff) + 0xf0000000)
+#define __io_address(n)		__io(IO_ADDRESS(n))
+
+#endif
diff --git a/arch/arm/mach-realview/include/mach/io.h b/arch/arm/mach-realview/include/mach/io.h
new file mode 100644
index 000000000000..aa069424d310
--- /dev/null
+++ b/arch/arm/mach-realview/include/mach/io.h
@@ -0,0 +1,33 @@
+/*
+ *  arch/arm/mach-realview/include/mach/io.h
+ *
+ *  Copyright (C) 2003 ARM Limited
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#ifndef __ASM_ARM_ARCH_IO_H
+#define __ASM_ARM_ARCH_IO_H
+
+#define IO_SPACE_LIMIT 0xffffffff
+
+static inline void __iomem *__io(unsigned long addr)
+{
+	return (void __iomem *)addr;
+}
+
+#define __io(a)			__io(a)
+#define __mem_pci(a)		(a)
+
+#endif
diff --git a/arch/arm/mach-realview/include/mach/irqs.h b/arch/arm/mach-realview/include/mach/irqs.h
new file mode 100644
index 000000000000..02a918529db3
--- /dev/null
+++ b/arch/arm/mach-realview/include/mach/irqs.h
@@ -0,0 +1,38 @@
+/*
+ *  arch/arm/mach-realview/include/mach/irqs.h
+ *
+ *  Copyright (C) 2003 ARM Limited
+ *  Copyright (C) 2000 Deep Blue Solutions Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#ifndef __ASM_ARCH_IRQS_H
+#define __ASM_ARCH_IRQS_H
+
+#include <mach/board-eb.h>
+#include <mach/board-pb11mp.h>
+#include <mach/board-pb1176.h>
+
+#define IRQ_LOCALTIMER		29
+#define IRQ_LOCALWDOG		30
+
+#define IRQ_GIC_START		32
+
+#ifndef NR_IRQS
+#error "NR_IRQS not defined by the board-specific files"
+#endif
+
+#endif
diff --git a/arch/arm/mach-realview/include/mach/memory.h b/arch/arm/mach-realview/include/mach/memory.h
new file mode 100644
index 000000000000..0e673483a141
--- /dev/null
+++ b/arch/arm/mach-realview/include/mach/memory.h
@@ -0,0 +1,38 @@
+/*
+ *  arch/arm/mach-realview/include/mach/memory.h
+ *
+ *  Copyright (C) 2003 ARM Limited
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#ifndef __ASM_ARCH_MEMORY_H
+#define __ASM_ARCH_MEMORY_H
+
+/*
+ * Physical DRAM offset.
+ */
+#define PHYS_OFFSET		UL(0x00000000)
+
+/*
+ * Virtual view <-> DMA view memory address translations
+ * virt_to_bus: Used to translate the virtual address to an
+ *              address suitable to be passed to set_dma_addr
+ * bus_to_virt: Used to convert an address for DMA operations
+ *              to an address that the kernel can use.
+ */
+#define __virt_to_bus(x)	((x) - PAGE_OFFSET)
+#define __bus_to_virt(x)	((x) + PAGE_OFFSET)
+
+#endif
diff --git a/arch/arm/mach-realview/include/mach/platform.h b/arch/arm/mach-realview/include/mach/platform.h
new file mode 100644
index 000000000000..4034b54950c2
--- /dev/null
+++ b/arch/arm/mach-realview/include/mach/platform.h
@@ -0,0 +1,293 @@
+/*
+ * arch/arm/mach-realview/include/mach/platform.h
+ *
+ * Copyright (c) ARM Limited 2003.  All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#ifndef __ASM_ARCH_PLATFORM_H
+#define __ASM_ARCH_PLATFORM_H
+
+/*
+ * Memory definitions
+ */
+#define REALVIEW_BOOT_ROM_LO          0x30000000		/* DoC Base (64Mb)...*/
+#define REALVIEW_BOOT_ROM_HI          0x30000000
+#define REALVIEW_BOOT_ROM_BASE        REALVIEW_BOOT_ROM_HI	 /*  Normal position */
+#define REALVIEW_BOOT_ROM_SIZE        SZ_64M
+
+#define REALVIEW_SSRAM_BASE           /* REALVIEW_SSMC_BASE ? */
+#define REALVIEW_SSRAM_SIZE           SZ_2M
+
+/* 
+ *  SDRAM
+ */
+#define REALVIEW_SDRAM_BASE           0x00000000
+
+/* 
+ *  Logic expansion modules
+ * 
+ */
+
+
+/* ------------------------------------------------------------------------
+ *  RealView Registers
+ * ------------------------------------------------------------------------
+ * 
+ */
+#define REALVIEW_SYS_ID_OFFSET               0x00
+#define REALVIEW_SYS_SW_OFFSET               0x04
+#define REALVIEW_SYS_LED_OFFSET              0x08
+#define REALVIEW_SYS_OSC0_OFFSET             0x0C
+
+#define REALVIEW_SYS_OSC1_OFFSET             0x10
+#define REALVIEW_SYS_OSC2_OFFSET             0x14
+#define REALVIEW_SYS_OSC3_OFFSET             0x18
+#define REALVIEW_SYS_OSC4_OFFSET             0x1C	/* OSC1 for RealView/AB */
+
+#define REALVIEW_SYS_LOCK_OFFSET             0x20
+#define REALVIEW_SYS_100HZ_OFFSET            0x24
+#define REALVIEW_SYS_CFGDATA1_OFFSET         0x28
+#define REALVIEW_SYS_CFGDATA2_OFFSET         0x2C
+#define REALVIEW_SYS_FLAGS_OFFSET            0x30
+#define REALVIEW_SYS_FLAGSSET_OFFSET         0x30
+#define REALVIEW_SYS_FLAGSCLR_OFFSET         0x34
+#define REALVIEW_SYS_NVFLAGS_OFFSET          0x38
+#define REALVIEW_SYS_NVFLAGSSET_OFFSET       0x38
+#define REALVIEW_SYS_NVFLAGSCLR_OFFSET       0x3C
+#define REALVIEW_SYS_RESETCTL_OFFSET         0x40
+#define REALVIEW_SYS_PCICTL_OFFSET           0x44
+#define REALVIEW_SYS_MCI_OFFSET              0x48
+#define REALVIEW_SYS_FLASH_OFFSET            0x4C
+#define REALVIEW_SYS_CLCD_OFFSET             0x50
+#define REALVIEW_SYS_CLCDSER_OFFSET          0x54
+#define REALVIEW_SYS_BOOTCS_OFFSET           0x58
+#define REALVIEW_SYS_24MHz_OFFSET            0x5C
+#define REALVIEW_SYS_MISC_OFFSET             0x60
+#define REALVIEW_SYS_IOSEL_OFFSET            0x70
+#define REALVIEW_SYS_PROCID_OFFSET           0x84
+#define REALVIEW_SYS_TEST_OSC0_OFFSET        0xC0
+#define REALVIEW_SYS_TEST_OSC1_OFFSET        0xC4
+#define REALVIEW_SYS_TEST_OSC2_OFFSET        0xC8
+#define REALVIEW_SYS_TEST_OSC3_OFFSET        0xCC
+#define REALVIEW_SYS_TEST_OSC4_OFFSET        0xD0
+
+#define REALVIEW_SYS_BASE                    0x10000000
+#define REALVIEW_SYS_ID                      (REALVIEW_SYS_BASE + REALVIEW_SYS_ID_OFFSET)
+#define REALVIEW_SYS_SW                      (REALVIEW_SYS_BASE + REALVIEW_SYS_SW_OFFSET)
+#define REALVIEW_SYS_LED                     (REALVIEW_SYS_BASE + REALVIEW_SYS_LED_OFFSET)
+#define REALVIEW_SYS_OSC0                    (REALVIEW_SYS_BASE + REALVIEW_SYS_OSC0_OFFSET)
+#define REALVIEW_SYS_OSC1                    (REALVIEW_SYS_BASE + REALVIEW_SYS_OSC1_OFFSET)
+
+#define REALVIEW_SYS_LOCK                    (REALVIEW_SYS_BASE + REALVIEW_SYS_LOCK_OFFSET)
+#define REALVIEW_SYS_100HZ                   (REALVIEW_SYS_BASE + REALVIEW_SYS_100HZ_OFFSET)
+#define REALVIEW_SYS_CFGDATA1                (REALVIEW_SYS_BASE + REALVIEW_SYS_CFGDATA1_OFFSET)
+#define REALVIEW_SYS_CFGDATA2                (REALVIEW_SYS_BASE + REALVIEW_SYS_CFGDATA2_OFFSET)
+#define REALVIEW_SYS_FLAGS                   (REALVIEW_SYS_BASE + REALVIEW_SYS_FLAGS_OFFSET)
+#define REALVIEW_SYS_FLAGSSET                (REALVIEW_SYS_BASE + REALVIEW_SYS_FLAGSSET_OFFSET)
+#define REALVIEW_SYS_FLAGSCLR                (REALVIEW_SYS_BASE + REALVIEW_SYS_FLAGSCLR_OFFSET)
+#define REALVIEW_SYS_NVFLAGS                 (REALVIEW_SYS_BASE + REALVIEW_SYS_NVFLAGS_OFFSET)
+#define REALVIEW_SYS_NVFLAGSSET              (REALVIEW_SYS_BASE + REALVIEW_SYS_NVFLAGSSET_OFFSET)
+#define REALVIEW_SYS_NVFLAGSCLR              (REALVIEW_SYS_BASE + REALVIEW_SYS_NVFLAGSCLR_OFFSET)
+#define REALVIEW_SYS_RESETCTL                (REALVIEW_SYS_BASE + REALVIEW_SYS_RESETCTL_OFFSET)
+#define REALVIEW_SYS_PCICTL                  (REALVIEW_SYS_BASE + REALVIEW_SYS_PCICTL_OFFSET)
+#define REALVIEW_SYS_MCI                     (REALVIEW_SYS_BASE + REALVIEW_SYS_MCI_OFFSET)
+#define REALVIEW_SYS_FLASH                   (REALVIEW_SYS_BASE + REALVIEW_SYS_FLASH_OFFSET)
+#define REALVIEW_SYS_CLCD                    (REALVIEW_SYS_BASE + REALVIEW_SYS_CLCD_OFFSET)
+#define REALVIEW_SYS_CLCDSER                 (REALVIEW_SYS_BASE + REALVIEW_SYS_CLCDSER_OFFSET)
+#define REALVIEW_SYS_BOOTCS                  (REALVIEW_SYS_BASE + REALVIEW_SYS_BOOTCS_OFFSET)
+#define REALVIEW_SYS_24MHz                   (REALVIEW_SYS_BASE + REALVIEW_SYS_24MHz_OFFSET)
+#define REALVIEW_SYS_MISC                    (REALVIEW_SYS_BASE + REALVIEW_SYS_MISC_OFFSET)
+#define REALVIEW_SYS_IOSEL                   (REALVIEW_SYS_BASE + REALVIEW_SYS_IOSEL_OFFSET)
+#define REALVIEW_SYS_PROCID                  (REALVIEW_SYS_BASE + REALVIEW_SYS_PROCID_OFFSET)
+#define REALVIEW_SYS_TEST_OSC0               (REALVIEW_SYS_BASE + REALVIEW_SYS_TEST_OSC0_OFFSET)
+#define REALVIEW_SYS_TEST_OSC1               (REALVIEW_SYS_BASE + REALVIEW_SYS_TEST_OSC1_OFFSET)
+#define REALVIEW_SYS_TEST_OSC2               (REALVIEW_SYS_BASE + REALVIEW_SYS_TEST_OSC2_OFFSET)
+#define REALVIEW_SYS_TEST_OSC3               (REALVIEW_SYS_BASE + REALVIEW_SYS_TEST_OSC3_OFFSET)
+#define REALVIEW_SYS_TEST_OSC4               (REALVIEW_SYS_BASE + REALVIEW_SYS_TEST_OSC4_OFFSET)
+
+/* 
+ * Values for REALVIEW_SYS_RESET_CTRL
+ */
+#define REALVIEW_SYS_CTRL_RESET_CONFIGCLR    0x01
+#define REALVIEW_SYS_CTRL_RESET_CONFIGINIT   0x02
+#define REALVIEW_SYS_CTRL_RESET_DLLRESET     0x03
+#define REALVIEW_SYS_CTRL_RESET_PLLRESET     0x04
+#define REALVIEW_SYS_CTRL_RESET_POR          0x05
+#define REALVIEW_SYS_CTRL_RESET_DoC          0x06
+
+#define REALVIEW_SYS_CTRL_LED         (1 << 0)
+
+
+/* ------------------------------------------------------------------------
+ *  RealView control registers
+ * ------------------------------------------------------------------------
+ */
+
+/* 
+ * REALVIEW_IDFIELD
+ *
+ * 31:24 = manufacturer (0x41 = ARM)
+ * 23:16 = architecture (0x08 = AHB system bus, ASB processor bus)
+ * 15:12 = FPGA (0x3 = XVC600 or XVC600E)
+ * 11:4  = build value
+ * 3:0   = revision number (0x1 = rev B (AHB))
+ */
+
+/*
+ * REALVIEW_SYS_LOCK
+ *     control access to SYS_OSCx, SYS_CFGDATAx, SYS_RESETCTL, 
+ *     SYS_CLD, SYS_BOOTCS
+ */
+#define REALVIEW_SYS_LOCK_LOCKED    (1 << 16)
+#define REALVIEW_SYS_LOCKVAL_MASK	0xFFFF		/* write 0xA05F to enable write access */
+
+/*
+ * REALVIEW_SYS_FLASH
+ */
+#define REALVIEW_FLASHPROG_FLVPPEN	(1 << 0)	/* Enable writing to flash */
+
+/*
+ * REALVIEW_INTREG
+ *     - used to acknowledge and control MMCI and UART interrupts 
+ */
+#define REALVIEW_INTREG_WPROT        0x00    /* MMC protection status (no interrupt generated) */
+#define REALVIEW_INTREG_RI0          0x01    /* Ring indicator UART0 is asserted,              */
+#define REALVIEW_INTREG_CARDIN       0x08    /* MMCI card in detect                            */
+                                                /* write 1 to acknowledge and clear               */
+#define REALVIEW_INTREG_RI1          0x02    /* Ring indicator UART1 is asserted,              */
+#define REALVIEW_INTREG_CARDINSERT   0x03    /* Signal insertion of MMC card                   */
+
+/*
+ * RealView common peripheral addresses
+ */
+#define REALVIEW_SCTL_BASE            0x10001000	/* System controller */
+#define REALVIEW_I2C_BASE             0x10002000	/* I2C control */
+#define REALVIEW_AACI_BASE            0x10004000	/* Audio */
+#define REALVIEW_MMCI0_BASE           0x10005000	/* MMC interface */
+#define REALVIEW_KMI0_BASE            0x10006000	/* KMI interface */
+#define REALVIEW_KMI1_BASE            0x10007000	/* KMI 2nd interface */
+#define REALVIEW_CHAR_LCD_BASE        0x10008000	/* Character LCD */
+#define REALVIEW_SCI_BASE             0x1000E000	/* Smart card controller */
+#define REALVIEW_GPIO1_BASE           0x10014000	/* GPIO port 1 */
+#define REALVIEW_GPIO2_BASE           0x10015000	/* GPIO port 2 */
+#define REALVIEW_DMC_BASE             0x10018000	/* DMC configuration */
+#define REALVIEW_DMAC_BASE            0x10030000	/* DMA controller */
+
+/* PCI space */
+#define REALVIEW_PCI_BASE             0x41000000	/* PCI Interface */
+#define REALVIEW_PCI_CFG_BASE	      0x42000000
+#define REALVIEW_PCI_MEM_BASE0        0x44000000
+#define REALVIEW_PCI_MEM_BASE1        0x50000000
+#define REALVIEW_PCI_MEM_BASE2        0x60000000
+/* Sizes of above maps */
+#define REALVIEW_PCI_BASE_SIZE	       0x01000000
+#define REALVIEW_PCI_CFG_BASE_SIZE    0x02000000
+#define REALVIEW_PCI_MEM_BASE0_SIZE   0x0c000000	/* 32Mb */
+#define REALVIEW_PCI_MEM_BASE1_SIZE   0x10000000	/* 256Mb */
+#define REALVIEW_PCI_MEM_BASE2_SIZE   0x10000000	/* 256Mb */
+
+#define REALVIEW_SDRAM67_BASE         0x70000000	/* SDRAM banks 6 and 7 */
+#define REALVIEW_LT_BASE              0x80000000	/* Logic Tile expansion */
+
+/*
+ * Disk on Chip
+ */
+#define REALVIEW_DOC_BASE             0x2C000000
+#define REALVIEW_DOC_SIZE             (16 << 20)
+#define REALVIEW_DOC_PAGE_SIZE        512
+#define REALVIEW_DOC_TOTAL_PAGES     (DOC_SIZE / PAGE_SIZE)
+
+#define ERASE_UNIT_PAGES    32
+#define START_PAGE          0x80
+
+/* 
+ *  LED settings, bits [7:0]
+ */
+#define REALVIEW_SYS_LED0             (1 << 0)
+#define REALVIEW_SYS_LED1             (1 << 1)
+#define REALVIEW_SYS_LED2             (1 << 2)
+#define REALVIEW_SYS_LED3             (1 << 3)
+#define REALVIEW_SYS_LED4             (1 << 4)
+#define REALVIEW_SYS_LED5             (1 << 5)
+#define REALVIEW_SYS_LED6             (1 << 6)
+#define REALVIEW_SYS_LED7             (1 << 7)
+
+#define ALL_LEDS                  0xFF
+
+#define LED_BANK                  REALVIEW_SYS_LED
+
+/* 
+ * Control registers
+ */
+#define REALVIEW_IDFIELD_OFFSET	0x0	/* RealView build information */
+#define REALVIEW_FLASHPROG_OFFSET	0x4	/* Flash devices */
+#define REALVIEW_INTREG_OFFSET		0x8	/* Interrupt control */
+#define REALVIEW_DECODE_OFFSET		0xC	/* Fitted logic modules */
+
+/* 
+ *  Application Flash
+ * 
+ */
+#define FLASH_BASE                      REALVIEW_FLASH_BASE
+#define FLASH_SIZE                      REALVIEW_FLASH_SIZE
+#define FLASH_END                       (FLASH_BASE + FLASH_SIZE - 1)
+#define FLASH_BLOCK_SIZE                SZ_128K
+
+/* 
+ *  Boot Flash
+ * 
+ */
+#define EPROM_BASE                      REALVIEW_BOOT_ROM_HI
+#define EPROM_SIZE                      REALVIEW_BOOT_ROM_SIZE
+#define EPROM_END                       (EPROM_BASE + EPROM_SIZE - 1)
+
+/* 
+ *  Clean base - dummy
+ * 
+ */
+#define CLEAN_BASE                      EPROM_BASE
+
+/*
+ * System controller bit assignment
+ */
+#define REALVIEW_REFCLK	0
+#define REALVIEW_TIMCLK	1
+
+#define REALVIEW_TIMER1_EnSel	15
+#define REALVIEW_TIMER2_EnSel	17
+#define REALVIEW_TIMER3_EnSel	19
+#define REALVIEW_TIMER4_EnSel	21
+
+
+#define MAX_TIMER                       2
+#define MAX_PERIOD                      699050
+#define TICKS_PER_uSEC                  1
+
+/* 
+ *  These are useconds NOT ticks.  
+ * 
+ */
+#define mSEC_1                          1000
+#define mSEC_5                          (mSEC_1 * 5)
+#define mSEC_10                         (mSEC_1 * 10)
+#define mSEC_25                         (mSEC_1 * 25)
+#define SEC_1                           (mSEC_1 * 1000)
+
+#define REALVIEW_CSR_BASE             0x10000000
+#define REALVIEW_CSR_SIZE             0x10000000
+
+#endif	/* __ASM_ARCH_PLATFORM_H */
diff --git a/include/asm-arm/arch-realview/scu.h b/arch/arm/mach-realview/include/mach/scu.h
index d55802d645af..d55802d645af 100644
--- a/include/asm-arm/arch-realview/scu.h
+++ b/arch/arm/mach-realview/include/mach/scu.h
diff --git a/include/asm-arm/arch-realview/smp.h b/arch/arm/mach-realview/include/mach/smp.h
index 515819efd046..515819efd046 100644
--- a/include/asm-arm/arch-realview/smp.h
+++ b/arch/arm/mach-realview/include/mach/smp.h
diff --git a/arch/arm/mach-realview/include/mach/system.h b/arch/arm/mach-realview/include/mach/system.h
new file mode 100644
index 000000000000..4d3c8f3f8053
--- /dev/null
+++ b/arch/arm/mach-realview/include/mach/system.h
@@ -0,0 +1,51 @@
+/*
+ *  arch/arm/mach-realview/include/mach/system.h
+ *
+ *  Copyright (C) 2003 ARM Limited
+ *  Copyright (C) 2000 Deep Blue Solutions Ltd
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#ifndef __ASM_ARCH_SYSTEM_H
+#define __ASM_ARCH_SYSTEM_H
+
+#include <mach/hardware.h>
+#include <asm/io.h>
+#include <mach/platform.h>
+
+static inline void arch_idle(void)
+{
+	/*
+	 * This should do all the clock switching
+	 * and wait for interrupt tricks
+	 */
+	cpu_do_idle();
+}
+
+static inline void arch_reset(char mode)
+{
+	void __iomem *hdr_ctrl = __io_address(REALVIEW_SYS_BASE) + REALVIEW_SYS_RESETCTL_OFFSET;
+	unsigned int val;
+
+	/*
+	 * To reset, we hit the on-board reset register
+	 * in the system FPGA
+	 */
+	val = __raw_readl(hdr_ctrl);
+	val |= REALVIEW_SYS_CTRL_RESET_CONFIGCLR;
+	__raw_writel(val, hdr_ctrl);
+}
+
+#endif
diff --git a/arch/arm/mach-realview/include/mach/timex.h b/arch/arm/mach-realview/include/mach/timex.h
new file mode 100644
index 000000000000..4eeb069373c2
--- /dev/null
+++ b/arch/arm/mach-realview/include/mach/timex.h
@@ -0,0 +1,23 @@
+/*
+ *  arch/arm/mach-realview/include/mach/timex.h
+ *
+ *  RealView architecture timex specifications
+ *
+ *  Copyright (C) 2003 ARM Limited
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#define CLOCK_TICK_RATE		(50000000 / 16)
diff --git a/arch/arm/mach-realview/include/mach/uncompress.h b/arch/arm/mach-realview/include/mach/uncompress.h
new file mode 100644
index 000000000000..79f50f218e77
--- /dev/null
+++ b/arch/arm/mach-realview/include/mach/uncompress.h
@@ -0,0 +1,72 @@
+/*
+ *  arch/arm/mach-realview/include/mach/uncompress.h
+ *
+ *  Copyright (C) 2003 ARM Limited
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#include <mach/hardware.h>
+#include <asm/mach-types.h>
+
+#include <mach/board-eb.h>
+#include <mach/board-pb11mp.h>
+#include <mach/board-pb1176.h>
+
+#define AMBA_UART_DR(base)	(*(volatile unsigned char *)((base) + 0x00))
+#define AMBA_UART_LCRH(base)	(*(volatile unsigned char *)((base) + 0x2c))
+#define AMBA_UART_CR(base)	(*(volatile unsigned char *)((base) + 0x30))
+#define AMBA_UART_FR(base)	(*(volatile unsigned char *)((base) + 0x18))
+
+/*
+ * Return the UART base address
+ */
+static inline unsigned long get_uart_base(void)
+{
+	if (machine_is_realview_eb())
+		return REALVIEW_EB_UART0_BASE;
+	else if (machine_is_realview_pb11mp())
+		return REALVIEW_PB11MP_UART0_BASE;
+	else if (machine_is_realview_pb1176())
+		return REALVIEW_PB1176_UART0_BASE;
+	else
+		return 0;
+}
+
+/*
+ * This does not append a newline
+ */
+static inline void putc(int c)
+{
+	unsigned long base = get_uart_base();
+
+	while (AMBA_UART_FR(base) & (1 << 5))
+		barrier();
+
+	AMBA_UART_DR(base) = c;
+}
+
+static inline void flush(void)
+{
+	unsigned long base = get_uart_base();
+
+	while (AMBA_UART_FR(base) & (1 << 3))
+		barrier();
+}
+
+/*
+ * nothing to do
+ */
+#define arch_decomp_setup()
+#define arch_decomp_wdog()
diff --git a/arch/arm/mach-realview/include/mach/vmalloc.h b/arch/arm/mach-realview/include/mach/vmalloc.h
new file mode 100644
index 000000000000..48cbcc873db2
--- /dev/null
+++ b/arch/arm/mach-realview/include/mach/vmalloc.h
@@ -0,0 +1,21 @@
+/*
+ *  arch/arm/mach-realview/include/mach/vmalloc.h
+ *
+ *  Copyright (C) 2003 ARM Limited
+ *  Copyright (C) 2000 Russell King.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#define VMALLOC_END		(PAGE_OFFSET + 0x18000000)
diff --git a/arch/arm/mach-realview/localtimer.c b/arch/arm/mach-realview/localtimer.c
index 50604360479f..82fa1f26e026 100644
--- a/arch/arm/mach-realview/localtimer.c
+++ b/arch/arm/mach-realview/localtimer.c
@@ -20,7 +20,7 @@
 
 #include <asm/hardware/arm_twd.h>
 #include <asm/hardware/gic.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 #include <asm/irq.h>
 
diff --git a/arch/arm/mach-realview/platsmp.c b/arch/arm/mach-realview/platsmp.c
index 8e813ed57519..1907d22f4fed 100644
--- a/arch/arm/mach-realview/platsmp.c
+++ b/arch/arm/mach-realview/platsmp.c
@@ -15,13 +15,13 @@
 #include <linux/smp.h>
 
 #include <asm/cacheflush.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 #include <asm/mach-types.h>
 
-#include <asm/arch/board-eb.h>
-#include <asm/arch/board-pb11mp.h>
-#include <asm/arch/scu.h>
+#include <mach/board-eb.h>
+#include <mach/board-pb11mp.h>
+#include <mach/scu.h>
 
 extern void realview_secondary_startup(void);
 
diff --git a/arch/arm/mach-realview/realview_eb.c b/arch/arm/mach-realview/realview_eb.c
index 5782d83fd886..19a9968fc5b9 100644
--- a/arch/arm/mach-realview/realview_eb.c
+++ b/arch/arm/mach-realview/realview_eb.c
@@ -24,7 +24,7 @@
 #include <linux/sysdev.h>
 #include <linux/amba/bus.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 #include <asm/irq.h>
 #include <asm/leds.h>
@@ -38,8 +38,8 @@
 #include <asm/mach/mmc.h>
 #include <asm/mach/time.h>
 
-#include <asm/arch/board-eb.h>
-#include <asm/arch/irqs.h>
+#include <mach/board-eb.h>
+#include <mach/irqs.h>
 
 #include "core.h"
 #include "clock.h"
diff --git a/arch/arm/mach-realview/realview_pb1176.c b/arch/arm/mach-realview/realview_pb1176.c
index cf7f576a5860..0986cbd15943 100644
--- a/arch/arm/mach-realview/realview_pb1176.c
+++ b/arch/arm/mach-realview/realview_pb1176.c
@@ -24,7 +24,7 @@
 #include <linux/sysdev.h>
 #include <linux/amba/bus.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 #include <asm/irq.h>
 #include <asm/leds.h>
@@ -39,8 +39,8 @@
 #include <asm/mach/mmc.h>
 #include <asm/mach/time.h>
 
-#include <asm/arch/board-pb1176.h>
-#include <asm/arch/irqs.h>
+#include <mach/board-pb1176.h>
+#include <mach/irqs.h>
 
 #include "core.h"
 #include "clock.h"
diff --git a/arch/arm/mach-realview/realview_pb11mp.c b/arch/arm/mach-realview/realview_pb11mp.c
index f7ce1c5a178a..f4e7135e3eb5 100644
--- a/arch/arm/mach-realview/realview_pb11mp.c
+++ b/arch/arm/mach-realview/realview_pb11mp.c
@@ -24,7 +24,7 @@
 #include <linux/sysdev.h>
 #include <linux/amba/bus.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 #include <asm/irq.h>
 #include <asm/leds.h>
@@ -39,8 +39,8 @@
 #include <asm/mach/mmc.h>
 #include <asm/mach/time.h>
 
-#include <asm/arch/board-pb11mp.h>
-#include <asm/arch/irqs.h>
+#include <mach/board-pb11mp.h>
+#include <mach/irqs.h>
 
 #include "core.h"
 #include "clock.h"
diff --git a/arch/arm/mach-rpc/dma.c b/arch/arm/mach-rpc/dma.c
index 596379a4cf82..4b19fe484190 100644
--- a/arch/arm/mach-rpc/dma.c
+++ b/arch/arm/mach-rpc/dma.c
@@ -20,7 +20,7 @@
 #include <asm/fiq.h>
 #include <asm/io.h>
 #include <asm/irq.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/uaccess.h>
 
 #include <asm/mach/dma.h>
diff --git a/include/asm-arm/arch-rpc/acornfb.h b/arch/arm/mach-rpc/include/mach/acornfb.h
index ecb7733a0949..395d76288ffe 100644
--- a/include/asm-arm/arch-rpc/acornfb.h
+++ b/arch/arm/mach-rpc/include/mach/acornfb.h
@@ -1,5 +1,5 @@
 /*
- *  linux/include/asm-arm/arch-rpc/acornfb.h
+ *  arch/arm/mach-rpc/include/mach/acornfb.h
  *
  *  Copyright (C) 1999 Russell King
  *
diff --git a/arch/arm/mach-rpc/include/mach/debug-macro.S b/arch/arm/mach-rpc/include/mach/debug-macro.S
new file mode 100644
index 000000000000..b2a939ffdcde
--- /dev/null
+++ b/arch/arm/mach-rpc/include/mach/debug-macro.S
@@ -0,0 +1,25 @@
+/* arch/arm/mach-rpc/include/mach/debug-macro.S
+ *
+ * Debugging macro include header
+ *
+ *  Copyright (C) 1994-1999 Russell King
+ *  Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+*/
+
+		.macro	addruart,rx
+		mrc	p15, 0, \rx, c1, c0
+		tst	\rx, #1			@ MMU enabled?
+		moveq	\rx, #0x03000000
+		movne	\rx, #0xe0000000
+		orr	\rx, \rx, #0x00010000
+		orr	\rx, \rx, #0x00000fe0
+		.endm
+
+#define UART_SHIFT	2
+#define FLOW_CONTROL
+#include <asm/hardware/debug-8250.S>
diff --git a/arch/arm/mach-rpc/include/mach/dma.h b/arch/arm/mach-rpc/include/mach/dma.h
new file mode 100644
index 000000000000..360b56f8f29f
--- /dev/null
+++ b/arch/arm/mach-rpc/include/mach/dma.h
@@ -0,0 +1,33 @@
+/*
+ *  arch/arm/mach-rpc/include/mach/dma.h
+ *
+ *  Copyright (C) 1997 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __ASM_ARCH_DMA_H
+#define __ASM_ARCH_DMA_H
+
+/*
+ * This is the maximum DMA address that can be DMAd to.
+ * There should not be more than (0xd0000000 - 0xc0000000)
+ * bytes of RAM.
+ */
+#define MAX_DMA_ADDRESS		0xd0000000
+#define MAX_DMA_CHANNELS	8
+
+#define DMA_0			0
+#define DMA_1			1
+#define DMA_2			2
+#define DMA_3			3
+#define DMA_S0			4
+#define DMA_S1			5
+#define DMA_VIRTUAL_FLOPPY	6
+#define DMA_VIRTUAL_SOUND	7
+
+#define DMA_FLOPPY		DMA_VIRTUAL_FLOPPY
+
+#endif /* _ASM_ARCH_DMA_H */
+
diff --git a/arch/arm/mach-rpc/include/mach/entry-macro.S b/arch/arm/mach-rpc/include/mach/entry-macro.S
new file mode 100644
index 000000000000..4e7e54144093
--- /dev/null
+++ b/arch/arm/mach-rpc/include/mach/entry-macro.S
@@ -0,0 +1,16 @@
+#include <mach/hardware.h>
+#include <asm/hardware/entry-macro-iomd.S>
+
+	.equ	ioc_base_high, IOC_BASE & 0xff000000
+	.equ	ioc_base_low, IOC_BASE & 0x00ff0000
+
+	.macro  get_irqnr_preamble, base, tmp
+	mov	\base, #ioc_base_high		@ point at IOC
+	.if	ioc_base_low
+	orr	\base, \base, #ioc_base_low
+	.endif
+	.endm
+
+	.macro  arch_ret_to_user, tmp1, tmp2
+	.endm
+
diff --git a/arch/arm/mach-rpc/include/mach/hardware.h b/arch/arm/mach-rpc/include/mach/hardware.h
new file mode 100644
index 000000000000..dde6b3c0e299
--- /dev/null
+++ b/arch/arm/mach-rpc/include/mach/hardware.h
@@ -0,0 +1,83 @@
+/*
+ *  arch/arm/mach-rpc/include/mach/hardware.h
+ *
+ *  Copyright (C) 1996-1999 Russell King.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ *  This file contains the hardware definitions of the RiscPC series machines.
+ */
+#ifndef __ASM_ARCH_HARDWARE_H
+#define __ASM_ARCH_HARDWARE_H
+
+#include <mach/memory.h>
+
+#ifndef __ASSEMBLY__
+#define IOMEM(x) ((void __iomem *)(unsigned long)(x))
+#else
+#define IOMEM(x) x
+#endif /* __ASSEMBLY__ */
+
+/*
+ * What hardware must be present
+ */
+#define HAS_IOMD
+#define HAS_VIDC20
+
+/* Hardware addresses of major areas.
+ *  *_START is the physical address
+ *  *_SIZE  is the size of the region
+ *  *_BASE  is the virtual address
+ */
+#define RAM_SIZE		0x10000000
+#define RAM_START		0x10000000
+
+#define EASI_SIZE		0x08000000	/* EASI I/O */
+#define EASI_START		0x08000000
+#define EASI_BASE		0xe5000000
+
+#define IO_START		0x03000000	/* I/O */
+#define IO_SIZE			0x01000000
+#define IO_BASE			IOMEM(0xe0000000)
+
+#define SCREEN_START		0x02000000	/* VRAM */
+#define SCREEN_END		0xdfc00000
+#define SCREEN_BASE		0xdf800000
+
+#define UNCACHEABLE_ADDR	0xdf010000
+
+/*
+ * IO Addresses
+ */
+#define VIDC_BASE		IOMEM(0xe0400000)
+#define EXPMASK_BASE		0xe0360000
+#define IOMD_BASE		IOMEM(0xe0200000)
+#define IOC_BASE		IOMEM(0xe0200000)
+#define PCIO_BASE		IOMEM(0xe0010000)
+#define FLOPPYDMA_BASE		IOMEM(0xe002a000)
+
+#define vidc_writel(val)	__raw_writel(val, VIDC_BASE)
+
+#define IO_EC_EASI_BASE		0x81400000
+#define IO_EC_IOC4_BASE		0x8009c000
+#define IO_EC_IOC_BASE		0x80090000
+#define IO_EC_MEMC8_BASE	0x8000ac00
+#define IO_EC_MEMC_BASE		0x80000000
+
+#define NETSLOT_BASE		0x0302b000
+#define NETSLOT_SIZE		0x00001000
+
+#define PODSLOT_IOC0_BASE	0x03240000
+#define PODSLOT_IOC4_BASE	0x03270000
+#define PODSLOT_IOC_SIZE	(1 << 14)
+#define PODSLOT_MEMC_BASE	0x03000000
+#define PODSLOT_MEMC_SIZE	(1 << 14)
+#define PODSLOT_EASI_BASE	0x08000000
+#define PODSLOT_EASI_SIZE	(1 << 24)
+
+#define	EXPMASK_STATUS		(EXPMASK_BASE + 0x00)
+#define EXPMASK_ENABLE		(EXPMASK_BASE + 0x04)
+
+#endif
diff --git a/arch/arm/mach-rpc/include/mach/io.h b/arch/arm/mach-rpc/include/mach/io.h
new file mode 100644
index 000000000000..9f0553b7ec28
--- /dev/null
+++ b/arch/arm/mach-rpc/include/mach/io.h
@@ -0,0 +1,258 @@
+/*
+ *  arch/arm/mach-rpc/include/mach/io.h
+ *
+ *  Copyright (C) 1997 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Modifications:
+ *  06-Dec-1997	RMK	Created.
+ */
+#ifndef __ASM_ARM_ARCH_IO_H
+#define __ASM_ARM_ARCH_IO_H
+
+#include <mach/hardware.h>
+
+#define IO_SPACE_LIMIT 0xffffffff
+
+/*
+ * GCC is totally crap at loading/storing data.  We try to persuade it
+ * to do the right thing by using these whereever possible instead of
+ * the above.
+ */
+#define __arch_base_getb(b,o)			\
+ ({						\
+	unsigned int __v, __r = (b);		\
+	__asm__ __volatile__(			\
+		"ldrb	%0, [%1, %2]"		\
+		: "=r" (__v)			\
+		: "r" (__r), "Ir" (o));		\
+	__v;					\
+ })
+
+#define __arch_base_getl(b,o)			\
+ ({						\
+	unsigned int __v, __r = (b);		\
+	__asm__ __volatile__(			\
+		"ldr	%0, [%1, %2]"		\
+		: "=r" (__v)			\
+		: "r" (__r), "Ir" (o));		\
+	__v;					\
+ })
+
+#define __arch_base_putb(v,b,o)			\
+ ({						\
+	unsigned int __r = (b);			\
+	__asm__ __volatile__(			\
+		"strb	%0, [%1, %2]"		\
+		:				\
+		: "r" (v), "r" (__r), "Ir" (o));\
+ })
+
+#define __arch_base_putl(v,b,o)			\
+ ({						\
+	unsigned int __r = (b);			\
+	__asm__ __volatile__(			\
+		"str	%0, [%1, %2]"		\
+		:				\
+		: "r" (v), "r" (__r), "Ir" (o));\
+ })
+
+/*
+ * We use two different types of addressing - PC style addresses, and ARM
+ * addresses.  PC style accesses the PC hardware with the normal PC IO
+ * addresses, eg 0x3f8 for serial#1.  ARM addresses are 0x80000000+
+ * and are translated to the start of IO.  Note that all addresses are
+ * shifted left!
+ */
+#define __PORT_PCIO(x)	(!((x) & 0x80000000))
+
+/*
+ * Dynamic IO functions.
+ */
+static inline void __outb (unsigned int value, unsigned int port)
+{
+	unsigned long temp;
+	__asm__ __volatile__(
+	"tst	%2, #0x80000000\n\t"
+	"mov	%0, %4\n\t"
+	"addeq	%0, %0, %3\n\t"
+	"strb	%1, [%0, %2, lsl #2]	@ outb"
+	: "=&r" (temp)
+	: "r" (value), "r" (port), "Ir" (PCIO_BASE - IO_BASE), "Ir" (IO_BASE)
+	: "cc");
+}
+
+static inline void __outw (unsigned int value, unsigned int port)
+{
+	unsigned long temp;
+	__asm__ __volatile__(
+	"tst	%2, #0x80000000\n\t"
+	"mov	%0, %4\n\t"
+	"addeq	%0, %0, %3\n\t"
+	"str	%1, [%0, %2, lsl #2]	@ outw"
+	: "=&r" (temp)
+	: "r" (value|value<<16), "r" (port), "Ir" (PCIO_BASE - IO_BASE), "Ir" (IO_BASE)
+	: "cc");
+}
+
+static inline void __outl (unsigned int value, unsigned int port)
+{
+	unsigned long temp;
+	__asm__ __volatile__(
+	"tst	%2, #0x80000000\n\t"
+	"mov	%0, %4\n\t"
+	"addeq	%0, %0, %3\n\t"
+	"str	%1, [%0, %2, lsl #2]	@ outl"
+	: "=&r" (temp)
+	: "r" (value), "r" (port), "Ir" (PCIO_BASE - IO_BASE), "Ir" (IO_BASE)
+	: "cc");
+}
+
+#define DECLARE_DYN_IN(sz,fnsuffix,instr)					\
+static inline unsigned sz __in##fnsuffix (unsigned int port)		\
+{										\
+	unsigned long temp, value;						\
+	__asm__ __volatile__(							\
+	"tst	%2, #0x80000000\n\t"						\
+	"mov	%0, %4\n\t"							\
+	"addeq	%0, %0, %3\n\t"							\
+	"ldr" instr "	%1, [%0, %2, lsl #2]	@ in" #fnsuffix			\
+	: "=&r" (temp), "=r" (value)						\
+	: "r" (port), "Ir" (PCIO_BASE - IO_BASE), "Ir" (IO_BASE)		\
+	: "cc");								\
+	return (unsigned sz)value;						\
+}
+
+static inline void __iomem *__deprecated __ioaddr(unsigned int port)
+{
+	void __iomem *ret;
+	if (__PORT_PCIO(port))
+		ret = PCIO_BASE;
+	else
+		ret = IO_BASE;
+	return ret + (port << 2);
+}
+
+#define DECLARE_IO(sz,fnsuffix,instr)	\
+	DECLARE_DYN_IN(sz,fnsuffix,instr)
+
+DECLARE_IO(char,b,"b")
+DECLARE_IO(short,w,"")
+DECLARE_IO(int,l,"")
+
+#undef DECLARE_IO
+#undef DECLARE_DYN_IN
+
+/*
+ * Constant address IO functions
+ *
+ * These have to be macros for the 'J' constraint to work -
+ * +/-4096 immediate operand.
+ */
+#define __outbc(value,port)							\
+({										\
+	if (__PORT_PCIO((port)))						\
+		__asm__ __volatile__(						\
+		"strb	%0, [%1, %2]	@ outbc"				\
+		: : "r" (value), "r" (PCIO_BASE), "Jr" ((port) << 2));		\
+	else									\
+		__asm__ __volatile__(						\
+		"strb	%0, [%1, %2]	@ outbc"				\
+		: : "r" (value), "r" (IO_BASE), "r" ((port) << 2));		\
+})
+
+#define __inbc(port)								\
+({										\
+	unsigned char result;							\
+	if (__PORT_PCIO((port)))						\
+		__asm__ __volatile__(						\
+		"ldrb	%0, [%1, %2]	@ inbc"					\
+		: "=r" (result) : "r" (PCIO_BASE), "Jr" ((port) << 2));		\
+	else									\
+		__asm__ __volatile__(						\
+		"ldrb	%0, [%1, %2]	@ inbc"					\
+		: "=r" (result) : "r" (IO_BASE), "r" ((port) << 2));		\
+	result;									\
+})
+
+#define __outwc(value,port)							\
+({										\
+	unsigned long __v = value;						\
+	if (__PORT_PCIO((port)))						\
+		__asm__ __volatile__(						\
+		"str	%0, [%1, %2]	@ outwc"				\
+		: : "r" (__v|__v<<16), "r" (PCIO_BASE), "Jr" ((port) << 2));	\
+	else									\
+		__asm__ __volatile__(						\
+		"str	%0, [%1, %2]	@ outwc"				\
+		: : "r" (__v|__v<<16), "r" (IO_BASE), "r" ((port) << 2));		\
+})
+
+#define __inwc(port)								\
+({										\
+	unsigned short result;							\
+	if (__PORT_PCIO((port)))						\
+		__asm__ __volatile__(						\
+		"ldr	%0, [%1, %2]	@ inwc"					\
+		: "=r" (result) : "r" (PCIO_BASE), "Jr" ((port) << 2));		\
+	else									\
+		__asm__ __volatile__(						\
+		"ldr	%0, [%1, %2]	@ inwc"					\
+		: "=r" (result) : "r" (IO_BASE), "r" ((port) << 2));		\
+	result & 0xffff;							\
+})
+
+#define __outlc(value,port)							\
+({										\
+	unsigned long __v = value;						\
+	if (__PORT_PCIO((port)))						\
+		__asm__ __volatile__(						\
+		"str	%0, [%1, %2]	@ outlc"				\
+		: : "r" (__v), "r" (PCIO_BASE), "Jr" ((port) << 2));		\
+	else									\
+		__asm__ __volatile__(						\
+		"str	%0, [%1, %2]	@ outlc"				\
+		: : "r" (__v), "r" (IO_BASE), "r" ((port) << 2));		\
+})
+
+#define __inlc(port)								\
+({										\
+	unsigned long result;							\
+	if (__PORT_PCIO((port)))						\
+		__asm__ __volatile__(						\
+		"ldr	%0, [%1, %2]	@ inlc"					\
+		: "=r" (result) : "r" (PCIO_BASE), "Jr" ((port) << 2));		\
+	else									\
+		__asm__ __volatile__(						\
+		"ldr	%0, [%1, %2]	@ inlc"					\
+		: "=r" (result) : "r" (IO_BASE), "r" ((port) << 2));		\
+	result;									\
+})
+
+#define __ioaddrc(port)		__ioaddr(port)
+
+#define inb(p)	 	(__builtin_constant_p((p)) ? __inbc(p)    : __inb(p))
+#define inw(p)	 	(__builtin_constant_p((p)) ? __inwc(p)    : __inw(p))
+#define inl(p)	 	(__builtin_constant_p((p)) ? __inlc(p)    : __inl(p))
+#define outb(v,p)	(__builtin_constant_p((p)) ? __outbc(v,p) : __outb(v,p))
+#define outw(v,p)	(__builtin_constant_p((p)) ? __outwc(v,p) : __outw(v,p))
+#define outl(v,p)	(__builtin_constant_p((p)) ? __outlc(v,p) : __outl(v,p))
+#define __ioaddr(p)	(__builtin_constant_p((p)) ? __ioaddr(p)  : __ioaddrc(p))
+/* the following macro is deprecated */
+#define ioaddr(port)	((unsigned long)__ioaddr((port)))
+
+#define insb(p,d,l)	__raw_readsb(__ioaddr(p),d,l)
+#define insw(p,d,l)	__raw_readsw(__ioaddr(p),d,l)
+
+#define outsb(p,d,l)	__raw_writesb(__ioaddr(p),d,l)
+#define outsw(p,d,l)	__raw_writesw(__ioaddr(p),d,l)
+
+/*
+ * 1:1 mapping for ioremapped regions.
+ */
+#define __mem_pci(x)	(x)
+
+#endif
diff --git a/arch/arm/mach-rpc/include/mach/irqs.h b/arch/arm/mach-rpc/include/mach/irqs.h
new file mode 100644
index 000000000000..4ce6ca97f669
--- /dev/null
+++ b/arch/arm/mach-rpc/include/mach/irqs.h
@@ -0,0 +1,46 @@
+/*
+ *  arch/arm/mach-rpc/include/mach/irqs.h
+ *
+ *  Copyright (C) 1996 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#define IRQ_PRINTER		0
+#define IRQ_BATLOW		1
+#define IRQ_FLOPPYINDEX		2
+#define IRQ_VSYNCPULSE		3
+#define IRQ_POWERON		4
+#define IRQ_TIMER0		5
+#define IRQ_TIMER1		6
+#define IRQ_IMMEDIATE		7
+#define IRQ_EXPCARDFIQ		8
+#define IRQ_HARDDISK		9
+#define IRQ_SERIALPORT		10
+#define IRQ_FLOPPYDISK		12
+#define IRQ_EXPANSIONCARD	13
+#define IRQ_KEYBOARDTX		14
+#define IRQ_KEYBOARDRX		15
+
+#define IRQ_DMA0		16
+#define IRQ_DMA1		17
+#define IRQ_DMA2		18
+#define IRQ_DMA3		19
+#define IRQ_DMAS0		20
+#define IRQ_DMAS1		21
+
+#define FIQ_FLOPPYDATA		0
+#define FIQ_ECONET		2
+#define FIQ_SERIALPORT		4
+#define FIQ_EXPANSIONCARD	6
+#define FIQ_FORCE		7
+
+/*
+ * This is the offset of the FIQ "IRQ" numbers
+ */
+#define FIQ_START		64
+
+#define IRQ_TIMER		IRQ_TIMER0
+
diff --git a/arch/arm/mach-rpc/include/mach/memory.h b/arch/arm/mach-rpc/include/mach/memory.h
new file mode 100644
index 000000000000..05425d558ee7
--- /dev/null
+++ b/arch/arm/mach-rpc/include/mach/memory.h
@@ -0,0 +1,39 @@
+/*
+ *  arch/arm/mach-rpc/include/mach/memory.h
+ *
+ *  Copyright (C) 1996,1997,1998 Russell King.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ *  Changelog:
+ *   20-Oct-1996 RMK	Created
+ *   31-Dec-1997 RMK	Fixed definitions to reduce warnings
+ *   11-Jan-1998 RMK	Uninlined to reduce hits on cache
+ *   08-Feb-1998 RMK	Added __virt_to_bus and __bus_to_virt
+ *   21-Mar-1999 RMK	Renamed to memory.h
+ *		 RMK	Added TASK_SIZE and PAGE_OFFSET
+ */
+#ifndef __ASM_ARCH_MEMORY_H
+#define __ASM_ARCH_MEMORY_H
+
+/*
+ * Physical DRAM offset.
+ */
+#define PHYS_OFFSET	UL(0x10000000)
+
+/*
+ * These are exactly the same on the RiscPC as the
+ * physical memory view.
+ */
+#define __virt_to_bus(x) __virt_to_phys(x)
+#define __bus_to_virt(x) __phys_to_virt(x)
+
+/*
+ * Cache flushing area - ROM
+ */
+#define FLUSH_BASE_PHYS		0x00000000
+#define FLUSH_BASE		0xdf000000
+
+#endif
diff --git a/arch/arm/mach-rpc/include/mach/system.h b/arch/arm/mach-rpc/include/mach/system.h
new file mode 100644
index 000000000000..54d6e3f2d319
--- /dev/null
+++ b/arch/arm/mach-rpc/include/mach/system.h
@@ -0,0 +1,27 @@
+/*
+ *  arch/arm/mach-rpc/include/mach/system.h
+ *
+ *  Copyright (C) 1996-1999 Russell King.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <mach/hardware.h>
+#include <asm/hardware/iomd.h>
+#include <asm/io.h>
+
+static inline void arch_idle(void)
+{
+	cpu_do_idle();
+}
+
+static inline void arch_reset(char mode)
+{
+	iomd_writeb(0, IOMD_ROMCR0);
+
+	/*
+	 * Jump into the ROM
+	 */
+	cpu_reset(0);
+}
diff --git a/arch/arm/mach-rpc/include/mach/timex.h b/arch/arm/mach-rpc/include/mach/timex.h
new file mode 100644
index 000000000000..dd75e7387bbe
--- /dev/null
+++ b/arch/arm/mach-rpc/include/mach/timex.h
@@ -0,0 +1,17 @@
+/*
+ *  arch/arm/mach-rpc/include/mach/timex.h
+ *
+ *  Copyright (C) 1997, 1998 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ *  RiscPC architecture timex specifications
+ */
+
+/*
+ * On the RiscPC, the clock ticks at 2MHz.
+ */
+#define CLOCK_TICK_RATE		2000000
+
diff --git a/arch/arm/mach-rpc/include/mach/uncompress.h b/arch/arm/mach-rpc/include/mach/uncompress.h
new file mode 100644
index 000000000000..baa9c866d7bf
--- /dev/null
+++ b/arch/arm/mach-rpc/include/mach/uncompress.h
@@ -0,0 +1,198 @@
+/*
+ *  arch/arm/mach-rpc/include/mach/uncompress.h
+ *
+ *  Copyright (C) 1996 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#define VIDMEM ((char *)SCREEN_START)
+ 
+#include <mach/hardware.h>
+#include <asm/io.h>
+#include <asm/setup.h>
+#include <asm/page.h>
+
+int video_size_row;
+unsigned char bytes_per_char_h;
+extern unsigned long con_charconvtable[256];
+
+struct param_struct {
+	unsigned long page_size;
+	unsigned long nr_pages;
+	unsigned long ramdisk_size;
+	unsigned long mountrootrdonly;
+	unsigned long rootdev;
+	unsigned long video_num_cols;
+	unsigned long video_num_rows;
+	unsigned long video_x;
+	unsigned long video_y;
+	unsigned long memc_control_reg;
+	unsigned char sounddefault;
+	unsigned char adfsdrives;
+	unsigned char bytes_per_char_h;
+	unsigned char bytes_per_char_v;
+	unsigned long unused[256/4-11];
+};
+
+static const unsigned long palette_4[16] = {
+	0x00000000,
+	0x000000cc,
+	0x0000cc00,             /* Green   */
+	0x0000cccc,             /* Yellow  */
+	0x00cc0000,             /* Blue    */
+	0x00cc00cc,             /* Magenta */
+	0x00cccc00,             /* Cyan    */
+	0x00cccccc,             /* White   */
+	0x00000000,
+	0x000000ff,
+	0x0000ff00,
+	0x0000ffff,
+	0x00ff0000,
+	0x00ff00ff,
+	0x00ffff00,
+	0x00ffffff
+};
+
+#define palette_setpixel(p)	*(unsigned long *)(IO_START+0x00400000) = 0x10000000|((p) & 255)
+#define palette_write(v)	*(unsigned long *)(IO_START+0x00400000) = 0x00000000|((v) & 0x00ffffff)
+
+/*
+ * params_phys is a linker defined symbol - see
+ * arch/arm/boot/compressed/Makefile
+ */
+extern __attribute__((pure)) struct param_struct *params(void);
+#define params (params())
+
+#ifndef STANDALONE_DEBUG 
+static unsigned long video_num_cols;
+static unsigned long video_num_rows;
+static unsigned long video_x;
+static unsigned long video_y;
+static unsigned char bytes_per_char_v;
+static int white;
+
+/*
+ * This does not append a newline
+ */
+static void putc(int c)
+{
+	extern void ll_write_char(char *, char c, char white);
+	int x,y;
+	char *ptr;
+
+	x = video_x;
+	y = video_y;
+
+	if (c == '\n') {
+		if (++y >= video_num_rows)
+			y--;
+	} else if (c == '\r') {
+		x = 0;
+	} else {
+		ptr = VIDMEM + ((y*video_num_cols*bytes_per_char_v+x)*bytes_per_char_h);
+		ll_write_char(ptr, c, white);
+		if (++x >= video_num_cols) {
+			x = 0;
+			if ( ++y >= video_num_rows ) {
+				y--;
+			}
+		}
+	}
+
+	video_x = x;
+	video_y = y;
+}
+
+static inline void flush(void)
+{
+}
+
+static void error(char *x);
+
+/*
+ * Setup for decompression
+ */
+static void arch_decomp_setup(void)
+{
+	int i;
+	struct tag *t = (struct tag *)params;
+	unsigned int nr_pages = 0, page_size = PAGE_SIZE;
+
+	if (t->hdr.tag == ATAG_CORE)
+	{
+		for (; t->hdr.size; t = tag_next(t))
+		{
+			if (t->hdr.tag == ATAG_VIDEOTEXT)
+			{
+				video_num_rows = t->u.videotext.video_lines;
+				video_num_cols = t->u.videotext.video_cols;
+				bytes_per_char_h = t->u.videotext.video_points;
+				bytes_per_char_v = t->u.videotext.video_points;
+				video_x = t->u.videotext.x;
+				video_y = t->u.videotext.y;
+			}
+
+			if (t->hdr.tag == ATAG_MEM)
+			{
+				page_size = PAGE_SIZE;
+				nr_pages += (t->u.mem.size / PAGE_SIZE);
+			}
+		}
+	}
+	else
+	{
+		nr_pages = params->nr_pages;
+		page_size = params->page_size;
+		video_num_rows = params->video_num_rows;
+		video_num_cols = params->video_num_cols;
+		video_x = params->video_x;
+		video_y = params->video_y;
+		bytes_per_char_h = params->bytes_per_char_h;
+		bytes_per_char_v = params->bytes_per_char_v;
+	}
+
+	video_size_row = video_num_cols * bytes_per_char_h;
+	
+	if (bytes_per_char_h == 4)
+		for (i = 0; i < 256; i++)
+			con_charconvtable[i] =
+				(i & 128 ? 1 << 0  : 0) |
+				(i & 64  ? 1 << 4  : 0) |
+				(i & 32  ? 1 << 8  : 0) |
+				(i & 16  ? 1 << 12 : 0) |
+				(i & 8   ? 1 << 16 : 0) |
+				(i & 4   ? 1 << 20 : 0) |
+				(i & 2   ? 1 << 24 : 0) |
+				(i & 1   ? 1 << 28 : 0);
+	else
+		for (i = 0; i < 16; i++)
+			con_charconvtable[i] =
+				(i & 8   ? 1 << 0  : 0) |
+				(i & 4   ? 1 << 8  : 0) |
+				(i & 2   ? 1 << 16 : 0) |
+				(i & 1   ? 1 << 24 : 0);
+
+
+	palette_setpixel(0);
+	if (bytes_per_char_h == 1) {
+		palette_write (0);
+		palette_write (0x00ffffff);
+		for (i = 2; i < 256; i++)
+			palette_write (0);
+		white = 1;
+	} else {
+		for (i = 0; i < 256; i++)
+			palette_write (i < 16 ? palette_4[i] : 0);
+		white = 7;
+	}
+
+	if (nr_pages * page_size < 4096*1024) error("<4M of mem\n");
+}
+#endif
+
+/*
+ * nothing to do
+ */
+#define arch_decomp_wdog()
diff --git a/arch/arm/mach-rpc/include/mach/vmalloc.h b/arch/arm/mach-rpc/include/mach/vmalloc.h
new file mode 100644
index 000000000000..9a96fd69e705
--- /dev/null
+++ b/arch/arm/mach-rpc/include/mach/vmalloc.h
@@ -0,0 +1,10 @@
+/*
+ *  arch/arm/mach-rpc/include/mach/vmalloc.h
+ *
+ *  Copyright (C) 1997 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#define VMALLOC_END       (PAGE_OFFSET + 0x1c000000)
diff --git a/arch/arm/mach-rpc/riscpc.c b/arch/arm/mach-rpc/riscpc.c
index eca558c6bf5d..ce8470fea887 100644
--- a/arch/arm/mach-rpc/riscpc.c
+++ b/arch/arm/mach-rpc/riscpc.c
@@ -22,7 +22,7 @@
 #include <asm/elf.h>
 #include <asm/io.h>
 #include <asm/mach-types.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/page.h>
 #include <asm/domain.h>
 #include <asm/setup.h>
diff --git a/arch/arm/mach-s3c2400/gpio.c b/arch/arm/mach-s3c2400/gpio.c
index 758e160410e9..148d0ddef3e8 100644
--- a/arch/arm/mach-s3c2400/gpio.c
+++ b/arch/arm/mach-s3c2400/gpio.c
@@ -25,11 +25,11 @@
 #include <linux/interrupt.h>
 #include <linux/ioport.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/irq.h>
 #include <asm/io.h>
 
-#include <asm/arch/regs-gpio.h>
+#include <mach/regs-gpio.h>
 
 int s3c2400_gpio_getirq(unsigned int pin)
 {
diff --git a/arch/arm/mach-s3c2400/include/mach/map.h b/arch/arm/mach-s3c2400/include/mach/map.h
new file mode 100644
index 000000000000..1535540edc82
--- /dev/null
+++ b/arch/arm/mach-s3c2400/include/mach/map.h
@@ -0,0 +1,66 @@
+/* arch/arm/mach-s3c2400/include/mach/map.h
+ *
+ * Copyright 2003,2007  Simtec Electronics
+ *	http://armlinux.simtec.co.uk/
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * Copyright 2003, Lucas Correia Villa Real
+ *
+ * S3C2400 - Memory map definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#define S3C2400_PA_MEMCTRL	(0x14000000)
+#define S3C2400_PA_USBHOST	(0x14200000)
+#define S3C2400_PA_IRQ		(0x14400000)
+#define S3C2400_PA_DMA		(0x14600000)
+#define S3C2400_PA_CLKPWR	(0x14800000)
+#define S3C2400_PA_LCD		(0x14A00000)
+#define S3C2400_PA_UART		(0x15000000)
+#define S3C2400_PA_TIMER	(0x15100000)
+#define S3C2400_PA_USBDEV	(0x15200140)
+#define S3C2400_PA_WATCHDOG	(0x15300000)
+#define S3C2400_PA_IIC		(0x15400000)
+#define S3C2400_PA_IIS		(0x15508000)
+#define S3C2400_PA_GPIO		(0x15600000)
+#define S3C2400_PA_RTC		(0x15700040)
+#define S3C2400_PA_ADC		(0x15800000)
+#define S3C2400_PA_SPI		(0x15900000)
+
+#define S3C2400_PA_MMC		(0x15A00000)
+#define S3C2400_SZ_MMC		SZ_1M
+
+/* physical addresses of all the chip-select areas */
+
+#define S3C2400_CS0	(0x00000000)
+#define S3C2400_CS1	(0x02000000)
+#define S3C2400_CS2	(0x04000000)
+#define S3C2400_CS3	(0x06000000)
+#define S3C2400_CS4	(0x08000000)
+#define S3C2400_CS5	(0x0A000000)
+#define S3C2400_CS6	(0x0C000000)
+#define S3C2400_CS7	(0x0E000000)
+
+#define S3C2400_SDRAM_PA    (S3C2400_CS6)
+
+/* Use a single interface for common resources between S3C24XX cpus */
+
+#define S3C24XX_PA_IRQ		S3C2400_PA_IRQ
+#define S3C24XX_PA_MEMCTRL	S3C2400_PA_MEMCTRL
+#define S3C24XX_PA_USBHOST	S3C2400_PA_USBHOST
+#define S3C24XX_PA_DMA		S3C2400_PA_DMA
+#define S3C24XX_PA_CLKPWR	S3C2400_PA_CLKPWR
+#define S3C24XX_PA_LCD		S3C2400_PA_LCD
+#define S3C24XX_PA_UART		S3C2400_PA_UART
+#define S3C24XX_PA_TIMER	S3C2400_PA_TIMER
+#define S3C24XX_PA_USBDEV	S3C2400_PA_USBDEV
+#define S3C24XX_PA_WATCHDOG	S3C2400_PA_WATCHDOG
+#define S3C24XX_PA_IIC		S3C2400_PA_IIC
+#define S3C24XX_PA_IIS		S3C2400_PA_IIS
+#define S3C24XX_PA_GPIO		S3C2400_PA_GPIO
+#define S3C24XX_PA_RTC		S3C2400_PA_RTC
+#define S3C24XX_PA_ADC		S3C2400_PA_ADC
+#define S3C24XX_PA_SPI		S3C2400_PA_SPI
diff --git a/arch/arm/mach-s3c2400/include/mach/memory.h b/arch/arm/mach-s3c2400/include/mach/memory.h
new file mode 100644
index 000000000000..8f4878e4f591
--- /dev/null
+++ b/arch/arm/mach-s3c2400/include/mach/memory.h
@@ -0,0 +1,23 @@
+/* arch/arm/mach-s3c2400/include/mach/memory.h
+ *  from arch/arm/mach-rpc/include/mach/memory.h
+ *
+ *  Copyright 2007 Simtec Electronics
+ *	http://armlinux.simtec.co.uk/
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ *  Copyright (C) 1996,1997,1998 Russell King.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_MEMORY_H
+#define __ASM_ARCH_MEMORY_H
+
+#define PHYS_OFFSET	UL(0x0C000000)
+
+#define __virt_to_bus(x) __virt_to_phys(x)
+#define __bus_to_virt(x) __phys_to_virt(x)
+
+#endif
diff --git a/arch/arm/mach-s3c2410/bast-ide.c b/arch/arm/mach-s3c2410/bast-ide.c
index df95fe37cdc8..298ececfa366 100644
--- a/arch/arm/mach-s3c2410/bast-ide.c
+++ b/arch/arm/mach-s3c2410/bast-ide.c
@@ -24,9 +24,9 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
-#include <asm/arch/map.h>
-#include <asm/arch/bast-map.h>
-#include <asm/arch/bast-irq.h>
+#include <mach/map.h>
+#include <mach/bast-map.h>
+#include <mach/bast-irq.h>
 
 /* IDE ports */
 
diff --git a/arch/arm/mach-s3c2410/bast-irq.c b/arch/arm/mach-s3c2410/bast-irq.c
index 76a7cb15f3be..c66021b5fa4d 100644
--- a/arch/arm/mach-s3c2410/bast-irq.c
+++ b/arch/arm/mach-s3c2410/bast-irq.c
@@ -28,15 +28,15 @@
 
 #include <asm/mach-types.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/irq.h>
 #include <asm/io.h>
 
 #include <asm/mach/irq.h>
 
-#include <asm/arch/regs-irq.h>
-#include <asm/arch/bast-map.h>
-#include <asm/arch/bast-irq.h>
+#include <mach/regs-irq.h>
+#include <mach/bast-map.h>
+#include <mach/bast-irq.h>
 
 #include <asm/plat-s3c24xx/irq.h>
 
diff --git a/arch/arm/mach-s3c2410/clock.c b/arch/arm/mach-s3c2410/clock.c
index 2bfaa6102025..1322851d1acb 100644
--- a/arch/arm/mach-s3c2410/clock.c
+++ b/arch/arm/mach-s3c2410/clock.c
@@ -34,12 +34,12 @@
 
 #include <asm/mach/map.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 
 #include <asm/plat-s3c/regs-serial.h>
-#include <asm/arch/regs-clock.h>
-#include <asm/arch/regs-gpio.h>
+#include <mach/regs-clock.h>
+#include <mach/regs-gpio.h>
 
 #include <asm/plat-s3c24xx/s3c2410.h>
 #include <asm/plat-s3c24xx/clock.h>
diff --git a/arch/arm/mach-s3c2410/dma.c b/arch/arm/mach-s3c2410/dma.c
index 8f12e855ef5f..8730797749e3 100644
--- a/arch/arm/mach-s3c2410/dma.c
+++ b/arch/arm/mach-s3c2410/dma.c
@@ -18,17 +18,17 @@
 #include <linux/serial_core.h>
 
 #include <asm/dma.h>
-#include <asm/arch/dma.h>
+#include <mach/dma.h>
 
 #include <asm/plat-s3c24xx/cpu.h>
 #include <asm/plat-s3c24xx/dma.h>
 
 #include <asm/plat-s3c/regs-serial.h>
-#include <asm/arch/regs-gpio.h>
+#include <mach/regs-gpio.h>
 #include <asm/plat-s3c/regs-ac97.h>
-#include <asm/arch/regs-mem.h>
-#include <asm/arch/regs-lcd.h>
-#include <asm/arch/regs-sdi.h>
+#include <mach/regs-mem.h>
+#include <mach/regs-lcd.h>
+#include <mach/regs-sdi.h>
 #include <asm/plat-s3c24xx/regs-iis.h>
 #include <asm/plat-s3c24xx/regs-spi.h>
 
diff --git a/arch/arm/mach-s3c2410/gpio.c b/arch/arm/mach-s3c2410/gpio.c
index 01e795d1146e..c6eefb1d590c 100644
--- a/arch/arm/mach-s3c2410/gpio.c
+++ b/arch/arm/mach-s3c2410/gpio.c
@@ -26,11 +26,11 @@
 #include <linux/interrupt.h>
 #include <linux/ioport.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/irq.h>
 #include <asm/io.h>
 
-#include <asm/arch/regs-gpio.h>
+#include <mach/regs-gpio.h>
 
 int s3c2410_gpio_irqfilter(unsigned int pin, unsigned int on,
 			   unsigned int config)
diff --git a/arch/arm/mach-s3c2410/h1940-bluetooth.c b/arch/arm/mach-s3c2410/h1940-bluetooth.c
index 3c48886521e7..5a6bc56f186b 100644
--- a/arch/arm/mach-s3c2410/h1940-bluetooth.c
+++ b/arch/arm/mach-s3c2410/h1940-bluetooth.c
@@ -16,9 +16,9 @@
 #include <linux/string.h>
 #include <linux/ctype.h>
 #include <linux/leds.h>
-#include <asm/arch/regs-gpio.h>
-#include <asm/hardware.h>
-#include <asm/arch/h1940-latch.h>
+#include <mach/regs-gpio.h>
+#include <mach/hardware.h>
+#include <mach/h1940-latch.h>
 
 #define DRV_NAME              "h1940-bt"
 
diff --git a/include/asm-arm/arch-s3c2410/anubis-cpld.h b/arch/arm/mach-s3c2410/include/mach/anubis-cpld.h
index 168b93fee529..1b614d5a81f3 100644
--- a/include/asm-arm/arch-s3c2410/anubis-cpld.h
+++ b/arch/arm/mach-s3c2410/include/mach/anubis-cpld.h
@@ -1,4 +1,4 @@
-/* linux/include/asm-arm/arch-s3c2410/anubis-cpld.h
+/* arch/arm/mach-s3c2410/include/mach/anubis-cpld.h
  *
  * Copyright (c) 2005 Simtec Electronics
  *	http://www.simtec.co.uk/products/
diff --git a/include/asm-arm/arch-s3c2410/anubis-irq.h b/arch/arm/mach-s3c2410/include/mach/anubis-irq.h
index cd77a70d45c0..a2a328134e34 100644
--- a/include/asm-arm/arch-s3c2410/anubis-irq.h
+++ b/arch/arm/mach-s3c2410/include/mach/anubis-irq.h
@@ -1,4 +1,4 @@
-/* linux/include/asm-arm/arch-s3c2410/anubis-irq.h
+/* arch/arm/mach-s3c2410/include/mach/anubis-irq.h
  *
  * Copyright (c) 2005 Simtec Electronics
  *	http://www.simtec.co.uk/products/
diff --git a/include/asm-arm/arch-s3c2410/anubis-map.h b/arch/arm/mach-s3c2410/include/mach/anubis-map.h
index 830d114261da..c9deb3a5b2c3 100644
--- a/include/asm-arm/arch-s3c2410/anubis-map.h
+++ b/arch/arm/mach-s3c2410/include/mach/anubis-map.h
@@ -1,4 +1,4 @@
-/* linux/include/asm-arm/arch-s3c2410/anubis-map.h
+/* arch/arm/mach-s3c2410/include/mach/anubis-map.h
  *
  * Copyright (c) 2005 Simtec Electronics
  *	http://www.simtec.co.uk/products/
diff --git a/include/asm-arm/arch-s3c2410/audio.h b/arch/arm/mach-s3c2410/include/mach/audio.h
index 0a6977fb5770..de0e8da48bc3 100644
--- a/include/asm-arm/arch-s3c2410/audio.h
+++ b/arch/arm/mach-s3c2410/include/mach/audio.h
@@ -1,4 +1,4 @@
-/* linux/include/asm-arm/arch-s3c2410/audio.h
+/* arch/arm/mach-s3c2410/include/mach/audio.h
  *
  * Copyright (c) 2004-2005 Simtec Electronics
  *	http://www.simtec.co.uk/products/SWLINUX/
diff --git a/include/asm-arm/arch-s3c2410/bast-cpld.h b/arch/arm/mach-s3c2410/include/mach/bast-cpld.h
index 034d2c5a47c4..20493b048360 100644
--- a/include/asm-arm/arch-s3c2410/bast-cpld.h
+++ b/arch/arm/mach-s3c2410/include/mach/bast-cpld.h
@@ -1,4 +1,4 @@
-/* linux/include/asm-arm/arch-s3c2410/bast-cpld.h
+/* arch/arm/mach-s3c2410/include/mach/bast-cpld.h
  *
  * Copyright (c) 2003,2004 Simtec Electronics
  *	Ben Dooks <ben@simtec.co.uk>
diff --git a/include/asm-arm/arch-s3c2410/bast-irq.h b/arch/arm/mach-s3c2410/include/mach/bast-irq.h
index 726c0466f85a..501c202b53cf 100644
--- a/include/asm-arm/arch-s3c2410/bast-irq.h
+++ b/arch/arm/mach-s3c2410/include/mach/bast-irq.h
@@ -1,4 +1,4 @@
-/* linux/include/asm-arm/arch-s3c2410/bast-irq.h
+/* arch/arm/mach-s3c2410/include/mach/bast-irq.h
  *
  * Copyright (c) 2003,2004 Simtec Electronics
  *	Ben Dooks <ben@simtec.co.uk>
diff --git a/include/asm-arm/arch-s3c2410/bast-map.h b/arch/arm/mach-s3c2410/include/mach/bast-map.h
index 86ac1c108db8..c2c5baf07345 100644
--- a/include/asm-arm/arch-s3c2410/bast-map.h
+++ b/arch/arm/mach-s3c2410/include/mach/bast-map.h
@@ -1,4 +1,4 @@
-/* linux/include/asm-arm/arch-s3c2410/bast-map.h
+/* arch/arm/mach-s3c2410/include/mach/bast-map.h
  *
  * Copyright (c) 2003,2004 Simtec Electronics
  *	Ben Dooks <ben@simtec.co.uk>
diff --git a/include/asm-arm/arch-s3c2410/bast-pmu.h b/arch/arm/mach-s3c2410/include/mach/bast-pmu.h
index 37a11fe54a78..61684cb8ce59 100644
--- a/include/asm-arm/arch-s3c2410/bast-pmu.h
+++ b/arch/arm/mach-s3c2410/include/mach/bast-pmu.h
@@ -1,4 +1,4 @@
-/* linux/include/asm-arm/arch-s3c2410/bast-pmu.h
+/* arch/arm/mach-s3c2410/include/mach/bast-pmu.h
  *
  * Copyright (c) 2003,2004 Simtec Electronics
  *	Ben Dooks <ben@simtec.co.uk>
diff --git a/arch/arm/mach-s3c2410/include/mach/debug-macro.S b/arch/arm/mach-s3c2410/include/mach/debug-macro.S
new file mode 100644
index 000000000000..682df23087ab
--- /dev/null
+++ b/arch/arm/mach-s3c2410/include/mach/debug-macro.S
@@ -0,0 +1,102 @@
+/* arch/arm/mach-s3c2410/include/mach/debug-macro.S
+ *
+ * Debugging macro include header
+ *
+ *  Copyright (C) 1994-1999 Russell King
+ *  Copyright (C) 2005 Simtec Electronics
+ *
+ *  Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <mach/map.h>
+#include <mach/regs-gpio.h>
+#include <asm/plat-s3c/regs-serial.h>
+
+#define S3C2410_UART1_OFF (0x4000)
+#define SHIFT_2440TXF (14-9)
+
+	.macro addruart, rx
+		mrc	p15, 0, \rx, c1, c0
+		tst	\rx, #1
+		ldreq	\rx, = S3C24XX_PA_UART
+		ldrne	\rx, = S3C24XX_VA_UART
+#if CONFIG_DEBUG_S3C_UART != 0
+		add	\rx, \rx, #(S3C2410_UART1_OFF * CONFIG_DEBUG_S3C_UART)
+#endif
+	.endm
+
+	.macro fifo_full_s3c24xx rd, rx
+		@ check for arm920 vs arm926. currently assume all arm926
+		@ devices have an 64 byte FIFO identical to the s3c2440
+		mrc	p15, 0, \rd, c0, c0
+		and	\rd, \rd, #0xff0
+		teq	\rd, #0x260
+		beq	1004f
+		mrc	p15, 0, \rd, c1, c0
+		tst	\rd, #1
+		addeq	\rd, \rx, #(S3C24XX_PA_GPIO - S3C24XX_PA_UART)
+		addne	\rd, \rx, #(S3C24XX_VA_GPIO - S3C24XX_VA_UART)
+		bic	\rd, \rd, #0xff000
+		ldr	\rd, [ \rd, # S3C2410_GSTATUS1 - S3C2410_GPIOREG(0) ]
+		and	\rd, \rd, #0x00ff0000
+		teq	\rd, #0x00440000		@ is it 2440?
+1004:
+		ldr	\rd, [ \rx, # S3C2410_UFSTAT ]
+		moveq	\rd, \rd, lsr #SHIFT_2440TXF
+		tst	\rd, #S3C2410_UFSTAT_TXFULL
+	.endm
+
+	.macro  fifo_full_s3c2410 rd, rx
+		ldr	\rd, [ \rx, # S3C2410_UFSTAT ]
+		tst	\rd, #S3C2410_UFSTAT_TXFULL
+	.endm
+
+/* fifo level reading */
+
+	.macro fifo_level_s3c24xx rd, rx
+		@ check for arm920 vs arm926. currently assume all arm926
+		@ devices have an 64 byte FIFO identical to the s3c2440
+		mrc	p15, 0, \rd, c0, c0
+		and	\rd, \rd, #0xff0
+		teq	\rd, #0x260
+		beq	10000f
+		mrc	p15, 0, \rd, c1, c0
+		tst	\rd, #1
+		addeq	\rd, \rx, #(S3C24XX_PA_GPIO - S3C24XX_PA_UART)
+		addne	\rd, \rx, #(S3C24XX_VA_GPIO - S3C24XX_VA_UART)
+		bic	\rd, \rd, #0xff000
+		ldr	\rd, [ \rd, # S3C2410_GSTATUS1 - S3C2410_GPIOREG(0) ]
+		and	\rd, \rd, #0x00ff0000
+		teq	\rd, #0x00440000		@ is it 2440?
+
+10000:
+		ldr	\rd, [ \rx, # S3C2410_UFSTAT ]
+		andne	\rd, \rd, #S3C2410_UFSTAT_TXMASK
+		andeq	\rd, \rd, #S3C2440_UFSTAT_TXMASK
+	.endm
+
+	.macro fifo_level_s3c2410 rd, rx
+		ldr	\rd, [ \rx, # S3C2410_UFSTAT ]
+		and	\rd, \rd, #S3C2410_UFSTAT_TXMASK
+	.endm
+
+/* Select the correct implementation depending on the configuration. The
+ * S3C2440 will get selected by default, as these are the most widely
+ * used variants of these
+*/
+
+#if defined(CONFIG_CPU_LLSERIAL_S3C2410_ONLY)
+#define fifo_full  fifo_full_s3c2410
+#define fifo_level fifo_level_s3c2410
+#elif !defined(CONFIG_CPU_LLSERIAL_S3C2440_ONLY)
+#define fifo_full  fifo_full_s3c24xx
+#define fifo_level fifo_level_s3c24xx
+#endif
+
+/* include the reset of the code which will do the work */
+
+#include <asm/plat-s3c/debug-macro.S>
diff --git a/arch/arm/mach-s3c2410/include/mach/dma.h b/arch/arm/mach-s3c2410/include/mach/dma.h
new file mode 100644
index 000000000000..891b53cd69b8
--- /dev/null
+++ b/arch/arm/mach-s3c2410/include/mach/dma.h
@@ -0,0 +1,453 @@
+/* arch/arm/mach-s3c2410/include/mach/dma.h
+ *
+ * Copyright (C) 2003,2004,2006 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * Samsung S3C241XX DMA support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_DMA_H
+#define __ASM_ARCH_DMA_H __FILE__
+
+#include <linux/sysdev.h>
+#include <mach/hardware.h>
+
+/*
+ * This is the maximum DMA address(physical address) that can be DMAd to.
+ *
+ */
+#define MAX_DMA_ADDRESS		0x40000000
+#define MAX_DMA_TRANSFER_SIZE   0x100000 /* Data Unit is half word  */
+
+/* We use `virtual` dma channels to hide the fact we have only a limited
+ * number of DMA channels, and not of all of them (dependant on the device)
+ * can be attached to any DMA source. We therefore let the DMA core handle
+ * the allocation of hardware channels to clients.
+*/
+
+enum dma_ch {
+	DMACH_XD0,
+	DMACH_XD1,
+	DMACH_SDI,
+	DMACH_SPI0,
+	DMACH_SPI1,
+	DMACH_UART0,
+	DMACH_UART1,
+	DMACH_UART2,
+	DMACH_TIMER,
+	DMACH_I2S_IN,
+	DMACH_I2S_OUT,
+	DMACH_PCM_IN,
+	DMACH_PCM_OUT,
+	DMACH_MIC_IN,
+	DMACH_USB_EP1,
+	DMACH_USB_EP2,
+	DMACH_USB_EP3,
+	DMACH_USB_EP4,
+	DMACH_UART0_SRC2,	/* s3c2412 second uart sources */
+	DMACH_UART1_SRC2,
+	DMACH_UART2_SRC2,
+	DMACH_UART3,		/* s3c2443 has extra uart */
+	DMACH_UART3_SRC2,
+	DMACH_MAX,		/* the end entry */
+};
+
+#define DMACH_LOW_LEVEL	(1<<28)	/* use this to specifiy hardware ch no */
+
+/* we have 4 dma channels */
+#ifndef CONFIG_CPU_S3C2443
+#define S3C2410_DMA_CHANNELS		(4)
+#else
+#define S3C2410_DMA_CHANNELS		(6)
+#endif
+
+/* types */
+
+enum s3c2410_dma_state {
+	S3C2410_DMA_IDLE,
+	S3C2410_DMA_RUNNING,
+	S3C2410_DMA_PAUSED
+};
+
+
+/* enum s3c2410_dma_loadst
+ *
+ * This represents the state of the DMA engine, wrt to the loaded / running
+ * transfers. Since we don't have any way of knowing exactly the state of
+ * the DMA transfers, we need to know the state to make decisions on wether
+ * we can
+ *
+ * S3C2410_DMA_NONE
+ *
+ * There are no buffers loaded (the channel should be inactive)
+ *
+ * S3C2410_DMA_1LOADED
+ *
+ * There is one buffer loaded, however it has not been confirmed to be
+ * loaded by the DMA engine. This may be because the channel is not
+ * yet running, or the DMA driver decided that it was too costly to
+ * sit and wait for it to happen.
+ *
+ * S3C2410_DMA_1RUNNING
+ *
+ * The buffer has been confirmed running, and not finisged
+ *
+ * S3C2410_DMA_1LOADED_1RUNNING
+ *
+ * There is a buffer waiting to be loaded by the DMA engine, and one
+ * currently running.
+*/
+
+enum s3c2410_dma_loadst {
+	S3C2410_DMALOAD_NONE,
+	S3C2410_DMALOAD_1LOADED,
+	S3C2410_DMALOAD_1RUNNING,
+	S3C2410_DMALOAD_1LOADED_1RUNNING,
+};
+
+enum s3c2410_dma_buffresult {
+	S3C2410_RES_OK,
+	S3C2410_RES_ERR,
+	S3C2410_RES_ABORT
+};
+
+enum s3c2410_dmasrc {
+	S3C2410_DMASRC_HW,		/* source is memory */
+	S3C2410_DMASRC_MEM		/* source is hardware */
+};
+
+/* enum s3c2410_chan_op
+ *
+ * operation codes passed to the DMA code by the user, and also used
+ * to inform the current channel owner of any changes to the system state
+*/
+
+enum s3c2410_chan_op {
+	S3C2410_DMAOP_START,
+	S3C2410_DMAOP_STOP,
+	S3C2410_DMAOP_PAUSE,
+	S3C2410_DMAOP_RESUME,
+	S3C2410_DMAOP_FLUSH,
+	S3C2410_DMAOP_TIMEOUT,		/* internal signal to handler */
+	S3C2410_DMAOP_STARTED,		/* indicate channel started */
+};
+
+/* flags */
+
+#define S3C2410_DMAF_SLOW         (1<<0)   /* slow, so don't worry about
+					    * waiting for reloads */
+#define S3C2410_DMAF_AUTOSTART    (1<<1)   /* auto-start if buffer queued */
+
+/* dma buffer */
+
+struct s3c2410_dma_client {
+	char                *name;
+};
+
+/* s3c2410_dma_buf_s
+ *
+ * internally used buffer structure to describe a queued or running
+ * buffer.
+*/
+
+struct s3c2410_dma_buf;
+struct s3c2410_dma_buf {
+	struct s3c2410_dma_buf	*next;
+	int			 magic;		/* magic */
+	int			 size;		/* buffer size in bytes */
+	dma_addr_t		 data;		/* start of DMA data */
+	dma_addr_t		 ptr;		/* where the DMA got to [1] */
+	void			*id;		/* client's id */
+};
+
+/* [1] is this updated for both recv/send modes? */
+
+struct s3c2410_dma_chan;
+
+/* s3c2410_dma_cbfn_t
+ *
+ * buffer callback routine type
+*/
+
+typedef void (*s3c2410_dma_cbfn_t)(struct s3c2410_dma_chan *,
+				   void *buf, int size,
+				   enum s3c2410_dma_buffresult result);
+
+typedef int  (*s3c2410_dma_opfn_t)(struct s3c2410_dma_chan *,
+				   enum s3c2410_chan_op );
+
+struct s3c2410_dma_stats {
+	unsigned long		loads;
+	unsigned long		timeout_longest;
+	unsigned long		timeout_shortest;
+	unsigned long		timeout_avg;
+	unsigned long		timeout_failed;
+};
+
+struct s3c2410_dma_map;
+
+/* struct s3c2410_dma_chan
+ *
+ * full state information for each DMA channel
+*/
+
+struct s3c2410_dma_chan {
+	/* channel state flags and information */
+	unsigned char		 number;      /* number of this dma channel */
+	unsigned char		 in_use;      /* channel allocated */
+	unsigned char		 irq_claimed; /* irq claimed for channel */
+	unsigned char		 irq_enabled; /* irq enabled for channel */
+	unsigned char		 xfer_unit;   /* size of an transfer */
+
+	/* channel state */
+
+	enum s3c2410_dma_state	 state;
+	enum s3c2410_dma_loadst	 load_state;
+	struct s3c2410_dma_client *client;
+
+	/* channel configuration */
+	enum s3c2410_dmasrc	 source;
+	unsigned long		 dev_addr;
+	unsigned long		 load_timeout;
+	unsigned int		 flags;		/* channel flags */
+	unsigned int		 hw_cfg;	/* last hw config */
+
+	struct s3c24xx_dma_map	*map;		/* channel hw maps */
+
+	/* channel's hardware position and configuration */
+	void __iomem		*regs;		/* channels registers */
+	void __iomem		*addr_reg;	/* data address register */
+	unsigned int		 irq;		/* channel irq */
+	unsigned long		 dcon;		/* default value of DCON */
+
+	/* driver handles */
+	s3c2410_dma_cbfn_t	 callback_fn;	/* buffer done callback */
+	s3c2410_dma_opfn_t	 op_fn;		/* channel op callback */
+
+	/* stats gathering */
+	struct s3c2410_dma_stats *stats;
+	struct s3c2410_dma_stats  stats_store;
+
+	/* buffer list and information */
+	struct s3c2410_dma_buf	*curr;		/* current dma buffer */
+	struct s3c2410_dma_buf	*next;		/* next buffer to load */
+	struct s3c2410_dma_buf	*end;		/* end of queue */
+
+	/* system device */
+	struct sys_device	dev;
+};
+
+/* the currently allocated channel information */
+extern struct s3c2410_dma_chan s3c2410_chans[];
+
+/* note, we don't really use dma_device_t at the moment */
+typedef unsigned long dma_device_t;
+
+/* functions --------------------------------------------------------------- */
+
+/* s3c2410_dma_request
+ *
+ * request a dma channel exclusivley
+*/
+
+extern int s3c2410_dma_request(dmach_t channel,
+			       struct s3c2410_dma_client *, void *dev);
+
+
+/* s3c2410_dma_ctrl
+ *
+ * change the state of the dma channel
+*/
+
+extern int s3c2410_dma_ctrl(dmach_t channel, enum s3c2410_chan_op op);
+
+/* s3c2410_dma_setflags
+ *
+ * set the channel's flags to a given state
+*/
+
+extern int s3c2410_dma_setflags(dmach_t channel,
+				unsigned int flags);
+
+/* s3c2410_dma_free
+ *
+ * free the dma channel (will also abort any outstanding operations)
+*/
+
+extern int s3c2410_dma_free(dmach_t channel, struct s3c2410_dma_client *);
+
+/* s3c2410_dma_enqueue
+ *
+ * place the given buffer onto the queue of operations for the channel.
+ * The buffer must be allocated from dma coherent memory, or the Dcache/WB
+ * drained before the buffer is given to the DMA system.
+*/
+
+extern int s3c2410_dma_enqueue(dmach_t channel, void *id,
+			       dma_addr_t data, int size);
+
+/* s3c2410_dma_config
+ *
+ * configure the dma channel
+*/
+
+extern int s3c2410_dma_config(dmach_t channel, int xferunit, int dcon);
+
+/* s3c2410_dma_devconfig
+ *
+ * configure the device we're talking to
+*/
+
+extern int s3c2410_dma_devconfig(int channel, enum s3c2410_dmasrc source,
+				 int hwcfg, unsigned long devaddr);
+
+/* s3c2410_dma_getposition
+ *
+ * get the position that the dma transfer is currently at
+*/
+
+extern int s3c2410_dma_getposition(dmach_t channel,
+				   dma_addr_t *src, dma_addr_t *dest);
+
+extern int s3c2410_dma_set_opfn(dmach_t, s3c2410_dma_opfn_t rtn);
+extern int s3c2410_dma_set_buffdone_fn(dmach_t, s3c2410_dma_cbfn_t rtn);
+
+/* DMA Register definitions */
+
+#define S3C2410_DMA_DISRC       (0x00)
+#define S3C2410_DMA_DISRCC      (0x04)
+#define S3C2410_DMA_DIDST       (0x08)
+#define S3C2410_DMA_DIDSTC      (0x0C)
+#define S3C2410_DMA_DCON        (0x10)
+#define S3C2410_DMA_DSTAT       (0x14)
+#define S3C2410_DMA_DCSRC       (0x18)
+#define S3C2410_DMA_DCDST       (0x1C)
+#define S3C2410_DMA_DMASKTRIG   (0x20)
+#define S3C2412_DMA_DMAREQSEL	(0x24)
+#define S3C2443_DMA_DMAREQSEL	(0x24)
+
+#define S3C2410_DISRCC_INC	(1<<0)
+#define S3C2410_DISRCC_APB	(1<<1)
+
+#define S3C2410_DMASKTRIG_STOP   (1<<2)
+#define S3C2410_DMASKTRIG_ON     (1<<1)
+#define S3C2410_DMASKTRIG_SWTRIG (1<<0)
+
+#define S3C2410_DCON_DEMAND     (0<<31)
+#define S3C2410_DCON_HANDSHAKE  (1<<31)
+#define S3C2410_DCON_SYNC_PCLK  (0<<30)
+#define S3C2410_DCON_SYNC_HCLK  (1<<30)
+
+#define S3C2410_DCON_INTREQ     (1<<29)
+
+#define S3C2410_DCON_CH0_XDREQ0	(0<<24)
+#define S3C2410_DCON_CH0_UART0	(1<<24)
+#define S3C2410_DCON_CH0_SDI	(2<<24)
+#define S3C2410_DCON_CH0_TIMER	(3<<24)
+#define S3C2410_DCON_CH0_USBEP1	(4<<24)
+
+#define S3C2410_DCON_CH1_XDREQ1	(0<<24)
+#define S3C2410_DCON_CH1_UART1	(1<<24)
+#define S3C2410_DCON_CH1_I2SSDI	(2<<24)
+#define S3C2410_DCON_CH1_SPI	(3<<24)
+#define S3C2410_DCON_CH1_USBEP2	(4<<24)
+
+#define S3C2410_DCON_CH2_I2SSDO	(0<<24)
+#define S3C2410_DCON_CH2_I2SSDI	(1<<24)
+#define S3C2410_DCON_CH2_SDI	(2<<24)
+#define S3C2410_DCON_CH2_TIMER	(3<<24)
+#define S3C2410_DCON_CH2_USBEP3	(4<<24)
+
+#define S3C2410_DCON_CH3_UART2	(0<<24)
+#define S3C2410_DCON_CH3_SDI	(1<<24)
+#define S3C2410_DCON_CH3_SPI	(2<<24)
+#define S3C2410_DCON_CH3_TIMER	(3<<24)
+#define S3C2410_DCON_CH3_USBEP4	(4<<24)
+
+#define S3C2410_DCON_SRCSHIFT   (24)
+#define S3C2410_DCON_SRCMASK	(7<<24)
+
+#define S3C2410_DCON_BYTE       (0<<20)
+#define S3C2410_DCON_HALFWORD   (1<<20)
+#define S3C2410_DCON_WORD       (2<<20)
+
+#define S3C2410_DCON_AUTORELOAD (0<<22)
+#define S3C2410_DCON_NORELOAD   (1<<22)
+#define S3C2410_DCON_HWTRIG     (1<<23)
+
+#ifdef CONFIG_CPU_S3C2440
+#define S3C2440_DIDSTC_CHKINT	(1<<2)
+
+#define S3C2440_DCON_CH0_I2SSDO	(5<<24)
+#define S3C2440_DCON_CH0_PCMIN	(6<<24)
+
+#define S3C2440_DCON_CH1_PCMOUT	(5<<24)
+#define S3C2440_DCON_CH1_SDI	(6<<24)
+
+#define S3C2440_DCON_CH2_PCMIN	(5<<24)
+#define S3C2440_DCON_CH2_MICIN	(6<<24)
+
+#define S3C2440_DCON_CH3_MICIN	(5<<24)
+#define S3C2440_DCON_CH3_PCMOUT	(6<<24)
+#endif
+
+#ifdef CONFIG_CPU_S3C2412
+
+#define S3C2412_DMAREQSEL_SRC(x)	((x)<<1)
+
+#define S3C2412_DMAREQSEL_HW		(1)
+
+#define S3C2412_DMAREQSEL_SPI0TX	S3C2412_DMAREQSEL_SRC(0)
+#define S3C2412_DMAREQSEL_SPI0RX	S3C2412_DMAREQSEL_SRC(1)
+#define S3C2412_DMAREQSEL_SPI1TX	S3C2412_DMAREQSEL_SRC(2)
+#define S3C2412_DMAREQSEL_SPI1RX	S3C2412_DMAREQSEL_SRC(3)
+#define S3C2412_DMAREQSEL_I2STX		S3C2412_DMAREQSEL_SRC(4)
+#define S3C2412_DMAREQSEL_I2SRX		S3C2412_DMAREQSEL_SRC(5)
+#define S3C2412_DMAREQSEL_TIMER		S3C2412_DMAREQSEL_SRC(9)
+#define S3C2412_DMAREQSEL_SDI		S3C2412_DMAREQSEL_SRC(10)
+#define S3C2412_DMAREQSEL_USBEP1	S3C2412_DMAREQSEL_SRC(13)
+#define S3C2412_DMAREQSEL_USBEP2	S3C2412_DMAREQSEL_SRC(14)
+#define S3C2412_DMAREQSEL_USBEP3	S3C2412_DMAREQSEL_SRC(15)
+#define S3C2412_DMAREQSEL_USBEP4	S3C2412_DMAREQSEL_SRC(16)
+#define S3C2412_DMAREQSEL_XDREQ0	S3C2412_DMAREQSEL_SRC(17)
+#define S3C2412_DMAREQSEL_XDREQ1	S3C2412_DMAREQSEL_SRC(18)
+#define S3C2412_DMAREQSEL_UART0_0	S3C2412_DMAREQSEL_SRC(19)
+#define S3C2412_DMAREQSEL_UART0_1	S3C2412_DMAREQSEL_SRC(20)
+#define S3C2412_DMAREQSEL_UART1_0	S3C2412_DMAREQSEL_SRC(21)
+#define S3C2412_DMAREQSEL_UART1_1	S3C2412_DMAREQSEL_SRC(22)
+#define S3C2412_DMAREQSEL_UART2_0	S3C2412_DMAREQSEL_SRC(23)
+#define S3C2412_DMAREQSEL_UART2_1	S3C2412_DMAREQSEL_SRC(24)
+
+#endif
+
+#define S3C2443_DMAREQSEL_SRC(x)	((x)<<1)
+
+#define S3C2443_DMAREQSEL_HW		(1)
+
+#define S3C2443_DMAREQSEL_SPI0TX	S3C2443_DMAREQSEL_SRC(0)
+#define S3C2443_DMAREQSEL_SPI0RX	S3C2443_DMAREQSEL_SRC(1)
+#define S3C2443_DMAREQSEL_SPI1TX	S3C2443_DMAREQSEL_SRC(2)
+#define S3C2443_DMAREQSEL_SPI1RX	S3C2443_DMAREQSEL_SRC(3)
+#define S3C2443_DMAREQSEL_I2STX		S3C2443_DMAREQSEL_SRC(4)
+#define S3C2443_DMAREQSEL_I2SRX		S3C2443_DMAREQSEL_SRC(5)
+#define S3C2443_DMAREQSEL_TIMER		S3C2443_DMAREQSEL_SRC(9)
+#define S3C2443_DMAREQSEL_SDI		S3C2443_DMAREQSEL_SRC(10)
+#define S3C2443_DMAREQSEL_XDREQ0	S3C2443_DMAREQSEL_SRC(17)
+#define S3C2443_DMAREQSEL_XDREQ1	S3C2443_DMAREQSEL_SRC(18)
+#define S3C2443_DMAREQSEL_UART0_0	S3C2443_DMAREQSEL_SRC(19)
+#define S3C2443_DMAREQSEL_UART0_1	S3C2443_DMAREQSEL_SRC(20)
+#define S3C2443_DMAREQSEL_UART1_0	S3C2443_DMAREQSEL_SRC(21)
+#define S3C2443_DMAREQSEL_UART1_1	S3C2443_DMAREQSEL_SRC(22)
+#define S3C2443_DMAREQSEL_UART2_0	S3C2443_DMAREQSEL_SRC(23)
+#define S3C2443_DMAREQSEL_UART2_1	S3C2443_DMAREQSEL_SRC(24)
+#define S3C2443_DMAREQSEL_UART3_0	S3C2443_DMAREQSEL_SRC(25)
+#define S3C2443_DMAREQSEL_UART3_1	S3C2443_DMAREQSEL_SRC(26)
+#define S3C2443_DMAREQSEL_PCMOUT	S3C2443_DMAREQSEL_SRC(27)
+#define S3C2443_DMAREQSEL_PCMIN 	S3C2443_DMAREQSEL_SRC(28)
+#define S3C2443_DMAREQSEL_MICIN		S3C2443_DMAREQSEL_SRC(29)
+
+#endif /* __ASM_ARCH_DMA_H */
diff --git a/arch/arm/mach-s3c2410/include/mach/entry-macro.S b/arch/arm/mach-s3c2410/include/mach/entry-macro.S
new file mode 100644
index 000000000000..473b3cd37d9b
--- /dev/null
+++ b/arch/arm/mach-s3c2410/include/mach/entry-macro.S
@@ -0,0 +1,78 @@
+/*
+ * arch/arm/mach-s3c2410/include/mach/entry-macro.S
+ *
+ * Low-level IRQ helper macros for S3C2410-based platforms
+ *
+ * This file is licensed under  the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+*/
+
+/* We have a problem that the INTOFFSET register does not always
+ * show one interrupt. Occasionally we get two interrupts through
+ * the prioritiser, and this causes the INTOFFSET register to show
+ * what looks like the logical-or of the two interrupt numbers.
+ *
+ * Thanks to Klaus, Shannon, et al for helping to debug this problem
+*/
+
+#define INTPND		(0x10)
+#define INTOFFSET	(0x14)
+
+#include <mach/hardware.h>
+#include <asm/irq.h>
+
+	.macro  get_irqnr_preamble, base, tmp
+	.endm
+
+	.macro  arch_ret_to_user, tmp1, tmp2
+	.endm
+
+	.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
+
+		mov	\base, #S3C24XX_VA_IRQ
+
+		@@ try the interrupt offset register, since it is there
+
+		ldr	\irqstat, [ \base, #INTPND ]
+		teq	\irqstat, #0
+		beq	1002f
+		ldr	\irqnr, [ \base, #INTOFFSET ]
+		mov	\tmp, #1
+		tst	\irqstat, \tmp, lsl \irqnr
+		bne	1001f
+
+		@@ the number specified is not a valid irq, so try
+		@@ and work it out for ourselves
+
+		mov	\irqnr, #0		@@ start here
+
+		@@ work out which irq (if any) we got
+
+		movs	\tmp, \irqstat, lsl#16
+		addeq	\irqnr, \irqnr, #16
+		moveq	\irqstat, \irqstat, lsr#16
+		tst	\irqstat, #0xff
+		addeq	\irqnr, \irqnr, #8
+		moveq	\irqstat, \irqstat, lsr#8
+		tst	\irqstat, #0xf
+		addeq	\irqnr, \irqnr, #4
+		moveq	\irqstat, \irqstat, lsr#4
+		tst	\irqstat, #0x3
+		addeq	\irqnr, \irqnr, #2
+		moveq	\irqstat, \irqstat, lsr#2
+		tst	\irqstat, #0x1
+		addeq	\irqnr, \irqnr, #1
+
+		@@ we have the value
+1001:
+		adds	\irqnr, \irqnr, #IRQ_EINT0
+1002:
+		@@ exit here, Z flag unset if IRQ
+
+	.endm
+
+		/* currently don't need an disable_fiq macro */
+
+		.macro	disable_fiq
+		.endm
diff --git a/arch/arm/mach-s3c2410/include/mach/fb.h b/arch/arm/mach-s3c2410/include/mach/fb.h
new file mode 100644
index 000000000000..eee0654eb8fb
--- /dev/null
+++ b/arch/arm/mach-s3c2410/include/mach/fb.h
@@ -0,0 +1,74 @@
+/* arch/arm/mach-s3c2410/include/mach/fb.h
+ *
+ * Copyright (c) 2004 Arnaud Patard <arnaud.patard@rtp-net.org>
+ *
+ * Inspired by pxafb.h
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARM_FB_H
+#define __ASM_ARM_FB_H
+
+#include <mach/regs-lcd.h>
+
+struct s3c2410fb_hw {
+	unsigned long	lcdcon1;
+	unsigned long	lcdcon2;
+	unsigned long	lcdcon3;
+	unsigned long	lcdcon4;
+	unsigned long	lcdcon5;
+};
+
+/* LCD description */
+struct s3c2410fb_display {
+	/* LCD type */
+	unsigned type;
+
+	/* Screen size */
+	unsigned short width;
+	unsigned short height;
+
+	/* Screen info */
+	unsigned short xres;
+	unsigned short yres;
+	unsigned short bpp;
+
+	unsigned pixclock;		/* pixclock in picoseconds */
+	unsigned short left_margin;  /* value in pixels (TFT) or HCLKs (STN) */
+	unsigned short right_margin; /* value in pixels (TFT) or HCLKs (STN) */
+	unsigned short hsync_len;    /* value in pixels (TFT) or HCLKs (STN) */
+	unsigned short upper_margin;	/* value in lines (TFT) or 0 (STN) */
+	unsigned short lower_margin;	/* value in lines (TFT) or 0 (STN) */
+	unsigned short vsync_len;	/* value in lines (TFT) or 0 (STN) */
+
+	/* lcd configuration registers */
+	unsigned long	lcdcon5;
+};
+
+struct s3c2410fb_mach_info {
+
+	struct s3c2410fb_display *displays;	/* attached diplays info */
+	unsigned num_displays;			/* number of defined displays */
+	unsigned default_display;
+
+	/* GPIOs */
+
+	unsigned long	gpcup;
+	unsigned long	gpcup_mask;
+	unsigned long	gpccon;
+	unsigned long	gpccon_mask;
+	unsigned long	gpdup;
+	unsigned long	gpdup_mask;
+	unsigned long	gpdcon;
+	unsigned long	gpdcon_mask;
+
+	/* lpc3600 control register */
+	unsigned long	lpcsel;
+};
+
+extern void __init s3c24xx_fb_set_platdata(struct s3c2410fb_mach_info *);
+
+#endif /* __ASM_ARM_FB_H */
diff --git a/arch/arm/mach-s3c2410/include/mach/gpio.h b/arch/arm/mach-s3c2410/include/mach/gpio.h
new file mode 100644
index 000000000000..3b52b86498a6
--- /dev/null
+++ b/arch/arm/mach-s3c2410/include/mach/gpio.h
@@ -0,0 +1,18 @@
+/* arch/arm/mach-s3c2410/include/mach/gpio.h
+ *
+ * Copyright (c) 2008 Simtec Electronics
+ *	http://armlinux.simtec.co.uk/
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C2410 - GPIO lib support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#define gpio_get_value	__gpio_get_value
+#define gpio_set_value	__gpio_set_value
+#define gpio_cansleep	__gpio_cansleep
+
+#include <asm-generic/gpio.h>
diff --git a/include/asm-arm/arch-s3c2410/h1940-latch.h b/arch/arm/mach-s3c2410/include/mach/h1940-latch.h
index c3de5ab102eb..d8a832729a8a 100644
--- a/include/asm-arm/arch-s3c2410/h1940-latch.h
+++ b/arch/arm/mach-s3c2410/include/mach/h1940-latch.h
@@ -1,4 +1,4 @@
-/* linux/include/asm-arm/arch-s3c2410/h1940-latch.h
+/* arch/arm/mach-s3c2410/include/mach/h1940-latch.h
  *
  * Copyright (c) 2005 Simtec Electronics
  *	http://armlinux.simtec.co.uk/
diff --git a/include/asm-arm/arch-s3c2410/h1940.h b/arch/arm/mach-s3c2410/include/mach/h1940.h
index 6135592e60f2..4559784129c0 100644
--- a/include/asm-arm/arch-s3c2410/h1940.h
+++ b/arch/arm/mach-s3c2410/include/mach/h1940.h
@@ -1,4 +1,4 @@
-/* linux/include/asm-arm/arch-s3c2410/h1940.h
+/* arch/arm/mach-s3c2410/include/mach/h1940.h
  *
  * Copyright 2006 Ben Dooks <ben-linux@fluff.org>
  *
diff --git a/arch/arm/mach-s3c2410/include/mach/hardware.h b/arch/arm/mach-s3c2410/include/mach/hardware.h
new file mode 100644
index 000000000000..74d5a1a4024c
--- /dev/null
+++ b/arch/arm/mach-s3c2410/include/mach/hardware.h
@@ -0,0 +1,137 @@
+/* arch/arm/mach-s3c2410/include/mach/hardware.h
+ *
+ * Copyright (c) 2003 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C2410 - hardware
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_HARDWARE_H
+#define __ASM_ARCH_HARDWARE_H
+
+#ifndef __ASSEMBLY__
+
+/* external functions for GPIO support
+ *
+ * These allow various different clients to access the same GPIO
+ * registers without conflicting. If your driver only owns the entire
+ * GPIO register, then it is safe to ioremap/__raw_{read|write} to it.
+*/
+
+/* s3c2410_gpio_cfgpin
+ *
+ * set the configuration of the given pin to the value passed.
+ *
+ * eg:
+ *    s3c2410_gpio_cfgpin(S3C2410_GPA0, S3C2410_GPA0_ADDR0);
+ *    s3c2410_gpio_cfgpin(S3C2410_GPE8, S3C2410_GPE8_SDDAT1);
+*/
+
+extern void s3c2410_gpio_cfgpin(unsigned int pin, unsigned int function);
+
+extern unsigned int s3c2410_gpio_getcfg(unsigned int pin);
+
+/* s3c2410_gpio_getirq
+ *
+ * turn the given pin number into the corresponding IRQ number
+ *
+ * returns:
+ *	< 0 = no interrupt for this pin
+ *	>=0 = interrupt number for the pin
+*/
+
+extern int s3c2410_gpio_getirq(unsigned int pin);
+
+/* s3c2410_gpio_irq2pin
+ *
+ * turn the given irq number into the corresponding GPIO number
+ *
+ * returns:
+ *	< 0 = no pin
+ *	>=0 = gpio pin number
+*/
+
+extern int s3c2410_gpio_irq2pin(unsigned int irq);
+
+#ifdef CONFIG_CPU_S3C2400
+
+extern int s3c2400_gpio_getirq(unsigned int pin);
+
+#endif /* CONFIG_CPU_S3C2400 */
+
+/* s3c2410_gpio_irqfilter
+ *
+ * set the irq filtering on the given pin
+ *
+ * on = 0 => disable filtering
+ *      1 => enable filtering
+ *
+ * config = S3C2410_EINTFLT_PCLK or S3C2410_EINTFLT_EXTCLK orred with
+ *          width of filter (0 through 63)
+ *
+ *
+*/
+
+extern int s3c2410_gpio_irqfilter(unsigned int pin, unsigned int on,
+				  unsigned int config);
+
+/* s3c2410_gpio_pullup
+ *
+ * configure the pull-up control on the given pin
+ *
+ * to = 1 => disable the pull-up
+ *      0 => enable the pull-up
+ *
+ * eg;
+ *
+ *   s3c2410_gpio_pullup(S3C2410_GPB0, 0);
+ *   s3c2410_gpio_pullup(S3C2410_GPE8, 0);
+*/
+
+extern void s3c2410_gpio_pullup(unsigned int pin, unsigned int to);
+
+/* s3c2410_gpio_getpull
+ *
+ * Read the state of the pull-up on a given pin
+ *
+ * return:
+ *	< 0 => error code
+ *	  0 => enabled
+ *	  1 => disabled
+*/
+
+extern int s3c2410_gpio_getpull(unsigned int pin);
+
+extern void s3c2410_gpio_setpin(unsigned int pin, unsigned int to);
+
+extern unsigned int s3c2410_gpio_getpin(unsigned int pin);
+
+extern unsigned int s3c2410_modify_misccr(unsigned int clr, unsigned int chg);
+
+#ifdef CONFIG_CPU_S3C2440
+
+extern int s3c2440_set_dsc(unsigned int pin, unsigned int value);
+
+#endif /* CONFIG_CPU_S3C2440 */
+
+#ifdef CONFIG_CPU_S3C2412
+
+extern int s3c2412_gpio_set_sleepcfg(unsigned int pin, unsigned int state);
+
+#endif /* CONFIG_CPU_S3C2412 */
+
+#endif /* __ASSEMBLY__ */
+
+#include <asm/sizes.h>
+#include <mach/map.h>
+
+/* machine specific hardware definitions should go after this */
+
+/* currently here until moved into config (todo) */
+#define CONFIG_NO_MULTIWORD_IO
+
+#endif /* __ASM_ARCH_HARDWARE_H */
diff --git a/include/asm-arm/arch-s3c2410/idle.h b/arch/arm/mach-s3c2410/include/mach/idle.h
index eed450608f9c..e9ddd706b16e 100644
--- a/include/asm-arm/arch-s3c2410/idle.h
+++ b/arch/arm/mach-s3c2410/include/mach/idle.h
@@ -1,4 +1,4 @@
-/* linux/include/asm-arm/arch-s3c2410/idle.h
+/* arch/arm/mach-s3c2410/include/mach/idle.h
  *
  * Copyright (c) 2004 Simtec Electronics <linux@simtec.co.uk>
  *		http://www.simtec.co.uk/products/SWLINUX/
diff --git a/arch/arm/mach-s3c2410/include/mach/io.h b/arch/arm/mach-s3c2410/include/mach/io.h
new file mode 100644
index 000000000000..9813dbf2ae4f
--- /dev/null
+++ b/arch/arm/mach-s3c2410/include/mach/io.h
@@ -0,0 +1,218 @@
+/*
+ * arch/arm/mach-s3c2410/include/mach/io.h
+ *  from arch/arm/mach-rpc/include/mach/io.h
+ *
+ * Copyright (C) 1997 Russell King
+ *	     (C) 2003 Simtec Electronics
+*/
+
+#ifndef __ASM_ARM_ARCH_IO_H
+#define __ASM_ARM_ARCH_IO_H
+
+#include <mach/hardware.h>
+
+#define IO_SPACE_LIMIT 0xffffffff
+
+/*
+ * We use two different types of addressing - PC style addresses, and ARM
+ * addresses.  PC style accesses the PC hardware with the normal PC IO
+ * addresses, eg 0x3f8 for serial#1.  ARM addresses are above A28
+ * and are translated to the start of IO.  Note that all addresses are
+ * not shifted left!
+ */
+
+#define __PORT_PCIO(x)	((x) < (1<<28))
+
+#define PCIO_BASE	 (S3C24XX_VA_ISA_WORD)
+#define PCIO_BASE_b	 (S3C24XX_VA_ISA_BYTE)
+#define PCIO_BASE_w	 (S3C24XX_VA_ISA_WORD)
+#define PCIO_BASE_l	 (S3C24XX_VA_ISA_WORD)
+/*
+ * Dynamic IO functions - let the compiler
+ * optimize the expressions
+ */
+
+#define DECLARE_DYN_OUT(sz,fnsuffix,instr) \
+static inline void __out##fnsuffix (unsigned int val, unsigned int port) \
+{ \
+	unsigned long temp;				      \
+	__asm__ __volatile__(				      \
+	"cmp	%2, #(1<<28)\n\t"			      \
+	"mov	%0, %2\n\t"				      \
+	"addcc	%0, %0, %3\n\t"				      \
+	"str" instr " %1, [%0, #0 ]	@ out" #fnsuffix      \
+	: "=&r" (temp)					      \
+	: "r" (val), "r" (port), "Ir" (PCIO_BASE_##fnsuffix)  \
+	: "cc");					      \
+}
+
+
+#define DECLARE_DYN_IN(sz,fnsuffix,instr)				\
+static inline unsigned sz __in##fnsuffix (unsigned int port)		\
+{									\
+	unsigned long temp, value;					\
+	__asm__ __volatile__(						\
+	"cmp	%2, #(1<<28)\n\t"					\
+	"mov	%0, %2\n\t"						\
+	"addcc	%0, %0, %3\n\t"						\
+	"ldr" instr "	%1, [%0, #0 ]	@ in" #fnsuffix		\
+	: "=&r" (temp), "=r" (value)					\
+	: "r" (port), "Ir" (PCIO_BASE_##fnsuffix)	\
+	: "cc");							\
+	return (unsigned sz)value;					\
+}
+
+static inline void __iomem *__ioaddr (unsigned long port)
+{
+	return __PORT_PCIO(port) ? (PCIO_BASE + port) : (void __iomem *)port;
+}
+
+#define DECLARE_IO(sz,fnsuffix,instr)	\
+	DECLARE_DYN_IN(sz,fnsuffix,instr) \
+	DECLARE_DYN_OUT(sz,fnsuffix,instr)
+
+DECLARE_IO(char,b,"b")
+DECLARE_IO(short,w,"h")
+DECLARE_IO(int,l,"")
+
+#undef DECLARE_IO
+#undef DECLARE_DYN_IN
+
+/*
+ * Constant address IO functions
+ *
+ * These have to be macros for the 'J' constraint to work -
+ * +/-4096 immediate operand.
+ */
+#define __outbc(value,port)						\
+({									\
+	if (__PORT_PCIO((port)))					\
+		__asm__ __volatile__(					\
+		"strb	%0, [%1, %2]	@ outbc"			\
+		: : "r" (value), "r" (PCIO_BASE), "Jr" ((port)));	\
+	else								\
+		__asm__ __volatile__(					\
+		"strb	%0, [%1, #0]	@ outbc"			\
+		: : "r" (value), "r" ((port)));				\
+})
+
+#define __inbc(port)							\
+({									\
+	unsigned char result;						\
+	if (__PORT_PCIO((port)))					\
+		__asm__ __volatile__(					\
+		"ldrb	%0, [%1, %2]	@ inbc"				\
+		: "=r" (result) : "r" (PCIO_BASE), "Jr" ((port)));	\
+	else								\
+		__asm__ __volatile__(					\
+		"ldrb	%0, [%1, #0]	@ inbc"				\
+		: "=r" (result) : "r" ((port)));			\
+	result;								\
+})
+
+#define __outwc(value,port)						\
+({									\
+	unsigned long v = value;					\
+	if (__PORT_PCIO((port))) {					\
+		if ((port) < 256 && (port) > -256)			\
+			__asm__ __volatile__(				\
+			"strh	%0, [%1, %2]	@ outwc"		\
+			: : "r" (v), "r" (PCIO_BASE), "Jr" ((port)));	\
+		else if ((port) > 0)					\
+			__asm__ __volatile__(				\
+			"strh	%0, [%1, %2]	@ outwc"		\
+			: : "r" (v),					\
+			    "r" (PCIO_BASE + ((port) & ~0xff)),		\
+			     "Jr" (((port) & 0xff)));			\
+		else							\
+			__asm__ __volatile__(				\
+			"strh	%0, [%1, #0]	@ outwc"		\
+			: : "r" (v),					\
+			    "r" (PCIO_BASE + (port)));			\
+	} else								\
+		__asm__ __volatile__(					\
+		"strh	%0, [%1, #0]	@ outwc"			\
+		: : "r" (v), "r" ((port)));				\
+})
+
+#define __inwc(port)							\
+({									\
+	unsigned short result;						\
+	if (__PORT_PCIO((port))) {					\
+		if ((port) < 256 && (port) > -256 )			\
+			__asm__ __volatile__(				\
+			"ldrh	%0, [%1, %2]	@ inwc"			\
+			: "=r" (result)					\
+			: "r" (PCIO_BASE),				\
+			  "Jr" ((port)));				\
+		else if ((port) > 0)					\
+			__asm__ __volatile__(				\
+			"ldrh	%0, [%1, %2]	@ inwc"			\
+			: "=r" (result)					\
+			: "r" (PCIO_BASE + ((port) & ~0xff)),		\
+			  "Jr" (((port) & 0xff)));			\
+		else							\
+			__asm__ __volatile__(				\
+			"ldrh	%0, [%1, #0]	@ inwc"			\
+			: "=r" (result)					\
+			: "r" (PCIO_BASE + ((port))));			\
+	} else								\
+		__asm__ __volatile__(					\
+		"ldrh	%0, [%1, #0]	@ inwc"				\
+		: "=r" (result) : "r" ((port)));			\
+	result;								\
+})
+
+#define __outlc(value,port)						\
+({									\
+	unsigned long v = value;					\
+	if (__PORT_PCIO((port)))					\
+		__asm__ __volatile__(					\
+		"str	%0, [%1, %2]	@ outlc"			\
+		: : "r" (v), "r" (PCIO_BASE), "Jr" ((port)));	\
+	else								\
+		__asm__ __volatile__(					\
+		"str	%0, [%1, #0]	@ outlc"			\
+		: : "r" (v), "r" ((port)));		\
+})
+
+#define __inlc(port)							\
+({									\
+	unsigned long result;						\
+	if (__PORT_PCIO((port)))					\
+		__asm__ __volatile__(					\
+		"ldr	%0, [%1, %2]	@ inlc"				\
+		: "=r" (result) : "r" (PCIO_BASE), "Jr" ((port)));	\
+	else								\
+		__asm__ __volatile__(					\
+		"ldr	%0, [%1, #0]	@ inlc"				\
+		: "=r" (result) : "r" ((port)));		\
+	result;								\
+})
+
+#define __ioaddrc(port)	((__PORT_PCIO(port) ? PCIO_BASE + (port) : (void __iomem *)(port)))
+
+#define inb(p)		(__builtin_constant_p((p)) ? __inbc(p)	   : __inb(p))
+#define inw(p)		(__builtin_constant_p((p)) ? __inwc(p)	   : __inw(p))
+#define inl(p)		(__builtin_constant_p((p)) ? __inlc(p)	   : __inl(p))
+#define outb(v,p)	(__builtin_constant_p((p)) ? __outbc(v,p) : __outb(v,p))
+#define outw(v,p)	(__builtin_constant_p((p)) ? __outwc(v,p) : __outw(v,p))
+#define outl(v,p)	(__builtin_constant_p((p)) ? __outlc(v,p) : __outl(v,p))
+#define __ioaddr(p)	(__builtin_constant_p((p)) ? __ioaddr(p)  : __ioaddrc(p))
+/* the following macro is deprecated */
+#define ioaddr(port)	__ioaddr((port))
+
+#define insb(p,d,l)	__raw_readsb(__ioaddr(p),d,l)
+#define insw(p,d,l)	__raw_readsw(__ioaddr(p),d,l)
+#define insl(p,d,l)	__raw_readsl(__ioaddr(p),d,l)
+
+#define outsb(p,d,l)	__raw_writesb(__ioaddr(p),d,l)
+#define outsw(p,d,l)	__raw_writesw(__ioaddr(p),d,l)
+#define outsl(p,d,l)	__raw_writesl(__ioaddr(p),d,l)
+
+/*
+ * 1:1 mapping for ioremapped regions.
+ */
+#define __mem_pci(x)	(x)
+
+#endif
diff --git a/arch/arm/mach-s3c2410/include/mach/irqs.h b/arch/arm/mach-s3c2410/include/mach/irqs.h
new file mode 100644
index 000000000000..950c71bf1489
--- /dev/null
+++ b/arch/arm/mach-s3c2410/include/mach/irqs.h
@@ -0,0 +1,166 @@
+/* arch/arm/mach-s3c2410/include/mach/irqs.h
+ *
+ * Copyright (c) 2003-2005 Simtec Electronics
+ *   Ben Dooks <ben@simtec.co.uk>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+
+#ifndef __ASM_ARCH_IRQS_H
+#define __ASM_ARCH_IRQS_H __FILE__
+
+#ifndef __ASM_ARM_IRQ_H
+#error "Do not include this directly, instead #include <asm/irq.h>"
+#endif
+
+/* we keep the first set of CPU IRQs out of the range of
+ * the ISA space, so that the PC104 has them to itself
+ * and we don't end up having to do horrible things to the
+ * standard ISA drivers....
+ */
+
+#define S3C2410_CPUIRQ_OFFSET	 (16)
+
+#define S3C2410_IRQ(x) ((x) + S3C2410_CPUIRQ_OFFSET)
+
+/* main cpu interrupts */
+#define IRQ_EINT0      S3C2410_IRQ(0)	    /* 16 */
+#define IRQ_EINT1      S3C2410_IRQ(1)
+#define IRQ_EINT2      S3C2410_IRQ(2)
+#define IRQ_EINT3      S3C2410_IRQ(3)
+#define IRQ_EINT4t7    S3C2410_IRQ(4)	    /* 20 */
+#define IRQ_EINT8t23   S3C2410_IRQ(5)
+#define IRQ_RESERVED6  S3C2410_IRQ(6)	    /* for s3c2410 */
+#define IRQ_CAM        S3C2410_IRQ(6)	    /* for s3c2440,s3c2443 */
+#define IRQ_BATT_FLT   S3C2410_IRQ(7)
+#define IRQ_TICK       S3C2410_IRQ(8)	    /* 24 */
+#define IRQ_WDT	       S3C2410_IRQ(9)	    /* WDT/AC97 for s3c2443 */
+#define IRQ_TIMER0     S3C2410_IRQ(10)
+#define IRQ_TIMER1     S3C2410_IRQ(11)
+#define IRQ_TIMER2     S3C2410_IRQ(12)
+#define IRQ_TIMER3     S3C2410_IRQ(13)
+#define IRQ_TIMER4     S3C2410_IRQ(14)
+#define IRQ_UART2      S3C2410_IRQ(15)
+#define IRQ_LCD	       S3C2410_IRQ(16)	    /* 32 */
+#define IRQ_DMA0       S3C2410_IRQ(17)	    /* IRQ_DMA for s3c2443 */
+#define IRQ_DMA1       S3C2410_IRQ(18)
+#define IRQ_DMA2       S3C2410_IRQ(19)
+#define IRQ_DMA3       S3C2410_IRQ(20)
+#define IRQ_SDI	       S3C2410_IRQ(21)
+#define IRQ_SPI0       S3C2410_IRQ(22)
+#define IRQ_UART1      S3C2410_IRQ(23)
+#define IRQ_RESERVED24 S3C2410_IRQ(24)	    /* 40 */
+#define IRQ_NFCON      S3C2410_IRQ(24)	    /* for s3c2440 */
+#define IRQ_USBD       S3C2410_IRQ(25)
+#define IRQ_USBH       S3C2410_IRQ(26)
+#define IRQ_IIC	       S3C2410_IRQ(27)
+#define IRQ_UART0      S3C2410_IRQ(28)	    /* 44 */
+#define IRQ_SPI1       S3C2410_IRQ(29)
+#define IRQ_RTC	       S3C2410_IRQ(30)
+#define IRQ_ADCPARENT  S3C2410_IRQ(31)
+
+/* interrupts generated from the external interrupts sources */
+#define IRQ_EINT4      S3C2410_IRQ(32)	   /* 48 */
+#define IRQ_EINT5      S3C2410_IRQ(33)
+#define IRQ_EINT6      S3C2410_IRQ(34)
+#define IRQ_EINT7      S3C2410_IRQ(35)
+#define IRQ_EINT8      S3C2410_IRQ(36)
+#define IRQ_EINT9      S3C2410_IRQ(37)
+#define IRQ_EINT10     S3C2410_IRQ(38)
+#define IRQ_EINT11     S3C2410_IRQ(39)
+#define IRQ_EINT12     S3C2410_IRQ(40)
+#define IRQ_EINT13     S3C2410_IRQ(41)
+#define IRQ_EINT14     S3C2410_IRQ(42)
+#define IRQ_EINT15     S3C2410_IRQ(43)
+#define IRQ_EINT16     S3C2410_IRQ(44)
+#define IRQ_EINT17     S3C2410_IRQ(45)
+#define IRQ_EINT18     S3C2410_IRQ(46)
+#define IRQ_EINT19     S3C2410_IRQ(47)
+#define IRQ_EINT20     S3C2410_IRQ(48)	   /* 64 */
+#define IRQ_EINT21     S3C2410_IRQ(49)
+#define IRQ_EINT22     S3C2410_IRQ(50)
+#define IRQ_EINT23     S3C2410_IRQ(51)
+
+
+#define IRQ_EINT(x)    (((x) >= 4) ? (IRQ_EINT4 + (x) - 4) : (IRQ_EINT0 + (x)))
+
+#define IRQ_LCD_FIFO   S3C2410_IRQ(52)
+#define IRQ_LCD_FRAME  S3C2410_IRQ(53)
+
+/* IRQs for the interal UARTs, and ADC
+ * these need to be ordered in number of appearance in the
+ * SUBSRC mask register
+*/
+
+#define S3C2410_IRQSUB(x)	S3C2410_IRQ((x)+54)
+
+#define IRQ_S3CUART_RX0		S3C2410_IRQSUB(0)	/* 70 */
+#define IRQ_S3CUART_TX0		S3C2410_IRQSUB(1)
+#define IRQ_S3CUART_ERR0	S3C2410_IRQSUB(2)
+
+#define IRQ_S3CUART_RX1		S3C2410_IRQSUB(3)	/* 73 */
+#define IRQ_S3CUART_TX1		S3C2410_IRQSUB(4)
+#define IRQ_S3CUART_ERR1	S3C2410_IRQSUB(5)
+
+#define IRQ_S3CUART_RX2		S3C2410_IRQSUB(6)	/* 76 */
+#define IRQ_S3CUART_TX2		S3C2410_IRQSUB(7)
+#define IRQ_S3CUART_ERR2	S3C2410_IRQSUB(8)
+
+#define IRQ_TC			S3C2410_IRQSUB(9)
+#define IRQ_ADC			S3C2410_IRQSUB(10)
+
+/* extra irqs for s3c2412 */
+
+#define IRQ_S3C2412_CFSDI	S3C2410_IRQ(21)
+
+#define IRQ_S3C2412_SDI		S3C2410_IRQSUB(13)
+#define IRQ_S3C2412_CF		S3C2410_IRQSUB(14)
+
+/* extra irqs for s3c2440 */
+
+#define IRQ_S3C2440_CAM_C	S3C2410_IRQSUB(11)	/* S3C2443 too */
+#define IRQ_S3C2440_CAM_P	S3C2410_IRQSUB(12)	/* S3C2443 too */
+#define IRQ_S3C2440_WDT		S3C2410_IRQSUB(13)
+#define IRQ_S3C2440_AC97	S3C2410_IRQSUB(14)
+
+/* irqs for s3c2443 */
+
+#define IRQ_S3C2443_DMA		S3C2410_IRQ(17)		/* IRQ_DMA1 */
+#define IRQ_S3C2443_UART3	S3C2410_IRQ(18)		/* IRQ_DMA2 */
+#define IRQ_S3C2443_CFCON	S3C2410_IRQ(19)		/* IRQ_DMA3 */
+#define IRQ_S3C2443_HSMMC	S3C2410_IRQ(20)		/* IRQ_SDI */
+#define IRQ_S3C2443_NAND	S3C2410_IRQ(24)		/* reserved */
+
+#define IRQ_S3C2443_LCD1	S3C2410_IRQSUB(14)
+#define IRQ_S3C2443_LCD2	S3C2410_IRQSUB(15)
+#define IRQ_S3C2443_LCD3	S3C2410_IRQSUB(16)
+#define IRQ_S3C2443_LCD4	S3C2410_IRQSUB(17)
+
+#define IRQ_S3C2443_DMA0	S3C2410_IRQSUB(18)
+#define IRQ_S3C2443_DMA1	S3C2410_IRQSUB(19)
+#define IRQ_S3C2443_DMA2	S3C2410_IRQSUB(20)
+#define IRQ_S3C2443_DMA3	S3C2410_IRQSUB(21)
+#define IRQ_S3C2443_DMA4	S3C2410_IRQSUB(22)
+#define IRQ_S3C2443_DMA5	S3C2410_IRQSUB(23)
+
+/* UART3 */
+#define IRQ_S3C2443_RX3		S3C2410_IRQSUB(24)
+#define IRQ_S3C2443_TX3		S3C2410_IRQSUB(25)
+#define IRQ_S3C2443_ERR3	S3C2410_IRQSUB(26)
+
+#define IRQ_S3C2443_WDT		S3C2410_IRQSUB(27)
+#define IRQ_S3C2443_AC97	S3C2410_IRQSUB(28)
+
+#ifdef CONFIG_CPU_S3C2443
+#define NR_IRQS (IRQ_S3C2443_AC97+1)
+#else
+#define NR_IRQS (IRQ_S3C2440_AC97+1)
+#endif
+
+/* Our FIQs are routable from IRQ_EINT0 to IRQ_ADCPARENT */
+#define FIQ_START		IRQ_EINT0
+
+#endif /* __ASM_ARCH_IRQ_H */
diff --git a/include/asm-arm/arch-s3c2410/leds-gpio.h b/arch/arm/mach-s3c2410/include/mach/leds-gpio.h
index 800846ebddba..d8a7672519b6 100644
--- a/include/asm-arm/arch-s3c2410/leds-gpio.h
+++ b/arch/arm/mach-s3c2410/include/mach/leds-gpio.h
@@ -1,4 +1,4 @@
-/* linux/include/asm-arm/arch-s3c2410/leds-gpio.h
+/* arch/arm/mach-s3c2410/include/mach/leds-gpio.h
  *
  * Copyright (c) 2006 Simtec Electronics
  *	http://armlinux.simtec.co.uk/
diff --git a/arch/arm/mach-s3c2410/include/mach/map.h b/arch/arm/mach-s3c2410/include/mach/map.h
new file mode 100644
index 000000000000..64bf7e94a5bf
--- /dev/null
+++ b/arch/arm/mach-s3c2410/include/mach/map.h
@@ -0,0 +1,178 @@
+/* arch/arm/mach-s3c2410/include/mach/map.h
+ *
+ * Copyright (c) 2003 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C2410 - Memory map definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_MAP_H
+#define __ASM_ARCH_MAP_H
+
+#include <asm/plat-s3c/map.h>
+
+#define S3C2410_ADDR(x)		S3C_ADDR(x)
+
+/* interrupt controller is the first thing we put in, to make
+ * the assembly code for the irq detection easier
+ */
+#define S3C24XX_VA_IRQ	   S3C_VA_IRQ
+#define S3C2410_PA_IRQ	   (0x4A000000)
+#define S3C24XX_SZ_IRQ	   SZ_1M
+
+/* memory controller registers */
+#define S3C24XX_VA_MEMCTRL S3C_VA_MEM
+#define S3C2410_PA_MEMCTRL (0x48000000)
+#define S3C24XX_SZ_MEMCTRL SZ_1M
+
+/* USB host controller */
+#define S3C2410_PA_USBHOST (0x49000000)
+#define S3C24XX_SZ_USBHOST SZ_1M
+
+/* DMA controller */
+#define S3C2410_PA_DMA	   (0x4B000000)
+#define S3C24XX_SZ_DMA	   SZ_1M
+
+/* Clock and Power management */
+#define S3C24XX_VA_CLKPWR  S3C_VA_SYS
+#define S3C2410_PA_CLKPWR  (0x4C000000)
+#define S3C24XX_SZ_CLKPWR  SZ_1M
+
+/* LCD controller */
+#define S3C2410_PA_LCD	   (0x4D000000)
+#define S3C24XX_SZ_LCD	   SZ_1M
+
+/* NAND flash controller */
+#define S3C2410_PA_NAND	   (0x4E000000)
+#define S3C24XX_SZ_NAND	   SZ_1M
+
+/* UARTs */
+#define S3C24XX_VA_UART	   S3C_VA_UART
+#define S3C2410_PA_UART	   (0x50000000)
+#define S3C24XX_SZ_UART	   SZ_1M
+
+/* Timers */
+#define S3C24XX_VA_TIMER   S3C_VA_TIMER
+#define S3C2410_PA_TIMER   (0x51000000)
+#define S3C24XX_SZ_TIMER   SZ_1M
+
+/* USB Device port */
+#define S3C2410_PA_USBDEV  (0x52000000)
+#define S3C24XX_SZ_USBDEV  SZ_1M
+
+/* Watchdog */
+#define S3C24XX_VA_WATCHDOG S3C_VA_WATCHDOG
+#define S3C2410_PA_WATCHDOG (0x53000000)
+#define S3C24XX_SZ_WATCHDOG SZ_1M
+
+/* IIC hardware controller */
+#define S3C2410_PA_IIC	   (0x54000000)
+#define S3C24XX_SZ_IIC	   SZ_1M
+
+/* IIS controller */
+#define S3C2410_PA_IIS	   (0x55000000)
+#define S3C24XX_SZ_IIS	   SZ_1M
+
+/* GPIO ports */
+
+/* the calculation for the VA of this must ensure that
+ * it is the same distance apart from the UART in the
+ * phsyical address space, as the initial mapping for the IO
+ * is done as a 1:1 maping. This puts it (currently) at
+ * 0xFA800000, which is not in the way of any current mapping
+ * by the base system.
+*/
+
+#define S3C2410_PA_GPIO	   (0x56000000)
+#define S3C24XX_VA_GPIO	   ((S3C2410_PA_GPIO - S3C24XX_PA_UART) + S3C24XX_VA_UART)
+#define S3C24XX_SZ_GPIO	   SZ_1M
+
+/* RTC */
+#define S3C2410_PA_RTC	   (0x57000000)
+#define S3C24XX_SZ_RTC	   SZ_1M
+
+/* ADC */
+#define S3C2410_PA_ADC	   (0x58000000)
+#define S3C24XX_SZ_ADC	   SZ_1M
+
+/* SPI */
+#define S3C2410_PA_SPI	   (0x59000000)
+#define S3C24XX_SZ_SPI	   SZ_1M
+
+/* SDI */
+#define S3C2410_PA_SDI	   (0x5A000000)
+#define S3C24XX_SZ_SDI	   SZ_1M
+
+/* CAMIF */
+#define S3C2440_PA_CAMIF   (0x4F000000)
+#define S3C2440_SZ_CAMIF   SZ_1M
+
+/* AC97 */
+
+#define S3C2440_PA_AC97	   (0x5B000000)
+#define S3C2440_SZ_AC97	   SZ_1M
+
+/* S3C2443 High-speed SD/MMC */
+#define S3C2443_PA_HSMMC   (0x4A800000)
+#define S3C2443_SZ_HSMMC   (256)
+
+/* ISA style IO, for each machine to sort out mappings for, if it
+ * implements it. We reserve two 16M regions for ISA.
+ */
+
+#define S3C24XX_VA_ISA_WORD  S3C2410_ADDR(0x02000000)
+#define S3C24XX_VA_ISA_BYTE  S3C2410_ADDR(0x03000000)
+
+/* physical addresses of all the chip-select areas */
+
+#define S3C2410_CS0 (0x00000000)
+#define S3C2410_CS1 (0x08000000)
+#define S3C2410_CS2 (0x10000000)
+#define S3C2410_CS3 (0x18000000)
+#define S3C2410_CS4 (0x20000000)
+#define S3C2410_CS5 (0x28000000)
+#define S3C2410_CS6 (0x30000000)
+#define S3C2410_CS7 (0x38000000)
+
+#define S3C2410_SDRAM_PA    (S3C2410_CS6)
+
+/* Use a single interface for common resources between S3C24XX cpus */
+
+#define S3C24XX_PA_IRQ      S3C2410_PA_IRQ
+#define S3C24XX_PA_MEMCTRL  S3C2410_PA_MEMCTRL
+#define S3C24XX_PA_USBHOST  S3C2410_PA_USBHOST
+#define S3C24XX_PA_DMA      S3C2410_PA_DMA
+#define S3C24XX_PA_CLKPWR   S3C2410_PA_CLKPWR
+#define S3C24XX_PA_LCD      S3C2410_PA_LCD
+#define S3C24XX_PA_UART     S3C2410_PA_UART
+#define S3C24XX_PA_TIMER    S3C2410_PA_TIMER
+#define S3C24XX_PA_USBDEV   S3C2410_PA_USBDEV
+#define S3C24XX_PA_WATCHDOG S3C2410_PA_WATCHDOG
+#define S3C24XX_PA_IIC      S3C2410_PA_IIC
+#define S3C24XX_PA_IIS      S3C2410_PA_IIS
+#define S3C24XX_PA_GPIO     S3C2410_PA_GPIO
+#define S3C24XX_PA_RTC      S3C2410_PA_RTC
+#define S3C24XX_PA_ADC      S3C2410_PA_ADC
+#define S3C24XX_PA_SPI      S3C2410_PA_SPI
+
+/* deal with the registers that move under the 2412/2413 */
+
+#if defined(CONFIG_CPU_S3C2412) || defined(CONFIG_CPU_S3C2413)
+#ifndef __ASSEMBLY__
+extern void __iomem *s3c24xx_va_gpio2;
+#endif
+#ifdef CONFIG_CPU_S3C2412_ONLY
+#define S3C24XX_VA_GPIO2 (S3C24XX_VA_GPIO + 0x10)
+#else
+#define S3C24XX_VA_GPIO2 s3c24xx_va_gpio2
+#endif
+#else
+#define s3c24xx_va_gpio2 S3C24XX_VA_GPIO
+#define S3C24XX_VA_GPIO2 S3C24XX_VA_GPIO
+#endif
+
+#endif /* __ASM_ARCH_MAP_H */
diff --git a/arch/arm/mach-s3c2410/include/mach/memory.h b/arch/arm/mach-s3c2410/include/mach/memory.h
new file mode 100644
index 000000000000..93782628a786
--- /dev/null
+++ b/arch/arm/mach-s3c2410/include/mach/memory.h
@@ -0,0 +1,19 @@
+/* arch/arm/mach-s3c2410/include/mach/memory.h
+ *  from arch/arm/mach-rpc/include/mach/memory.h
+ *
+ *  Copyright (C) 1996,1997,1998 Russell King.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_MEMORY_H
+#define __ASM_ARCH_MEMORY_H
+
+#define PHYS_OFFSET	UL(0x30000000)
+
+#define __virt_to_bus(x) __virt_to_phys(x)
+#define __bus_to_virt(x) __phys_to_virt(x)
+
+#endif
diff --git a/include/asm-arm/arch-s3c2410/osiris-cpld.h b/arch/arm/mach-s3c2410/include/mach/osiris-cpld.h
index 229ab2351db6..e9e36b0abbac 100644
--- a/include/asm-arm/arch-s3c2410/osiris-cpld.h
+++ b/arch/arm/mach-s3c2410/include/mach/osiris-cpld.h
@@ -1,4 +1,4 @@
-/* linux/include/asm-arm/arch-s3c2410/osiris-cpld.h
+/* arch/arm/mach-s3c2410/include/mach/osiris-cpld.h
  *
  * Copyright 2005 Simtec Electronics
  *	http://www.simtec.co.uk/products/
diff --git a/include/asm-arm/arch-s3c2410/osiris-map.h b/arch/arm/mach-s3c2410/include/mach/osiris-map.h
index b5c74d2b9aaa..639eff523d4e 100644
--- a/include/asm-arm/arch-s3c2410/osiris-map.h
+++ b/arch/arm/mach-s3c2410/include/mach/osiris-map.h
@@ -1,4 +1,4 @@
-/* linux/include/asm-arm/arch-s3c2410/osiris-map.h
+/* arch/arm/mach-s3c2410/include/mach/osiris-map.h
  *
  * (c) 2005 Simtec Electronics
  *	http://www.simtec.co.uk/products/
diff --git a/include/asm-arm/arch-s3c2410/otom-map.h b/arch/arm/mach-s3c2410/include/mach/otom-map.h
index e40c93429854..f9277a52c145 100644
--- a/include/asm-arm/arch-s3c2410/otom-map.h
+++ b/arch/arm/mach-s3c2410/include/mach/otom-map.h
@@ -1,4 +1,4 @@
-/* linux/include/asm-arm/arch-s3c2410/otom-map.h
+/* arch/arm/mach-s3c2410/include/mach/otom-map.h
  *
  * (c) 2005 Guillaume GOURAT / NexVision
  *          guillaume.gourat@nexvision.fr
diff --git a/include/asm-arm/arch-s3c2410/regs-clock.h b/arch/arm/mach-s3c2410/include/mach/regs-clock.h
index 37661358b42b..b3f90aa78076 100644
--- a/include/asm-arm/arch-s3c2410/regs-clock.h
+++ b/arch/arm/mach-s3c2410/include/mach/regs-clock.h
@@ -1,4 +1,4 @@
-/* linux/include/asm-arm/arch-s3c2410/regs-clock.h
+/* arch/arm/mach-s3c2410/include/mach/regs-clock.h
  *
  * Copyright (c) 2003,2004,2005,2006 Simtec Electronics <linux@simtec.co.uk>
  *		      http://armlinux.simtec.co.uk/
@@ -11,7 +11,7 @@
 */
 
 #ifndef __ASM_ARM_REGS_CLOCK
-#define __ASM_ARM_REGS_CLOCK "$Id: clock.h,v 1.4 2003/04/30 14:50:51 ben Exp $"
+#define __ASM_ARM_REGS_CLOCK
 
 #define S3C2410_CLKREG(x) ((x) + S3C24XX_VA_CLKPWR)
 
diff --git a/include/asm-arm/arch-s3c2410/regs-dsc.h b/arch/arm/mach-s3c2410/include/mach/regs-dsc.h
index 1235df70f34e..3c3853cd3cf7 100644
--- a/include/asm-arm/arch-s3c2410/regs-dsc.h
+++ b/arch/arm/mach-s3c2410/include/mach/regs-dsc.h
@@ -1,4 +1,4 @@
-/* linux/include/asm-arm/arch-s3c2410/regs-dsc.h
+/* arch/arm/mach-s3c2410/include/mach/regs-dsc.h
  *
  * Copyright (c) 2004 Simtec Electronics <linux@simtec.co.uk>
  *		      http://www.simtec.co.uk/products/SWLINUX/
diff --git a/arch/arm/mach-s3c2410/include/mach/regs-gpio.h b/arch/arm/mach-s3c2410/include/mach/regs-gpio.h
new file mode 100644
index 000000000000..528080ceac44
--- /dev/null
+++ b/arch/arm/mach-s3c2410/include/mach/regs-gpio.h
@@ -0,0 +1,1163 @@
+/* arch/arm/mach-s3c2410/include/mach/regs-gpio.h
+ *
+ * Copyright (c) 2003,2004 Simtec Electronics <linux@simtec.co.uk>
+ *		           http://www.simtec.co.uk/products/SWLINUX/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * S3C2410 GPIO register definitions
+*/
+
+
+#ifndef __ASM_ARCH_REGS_GPIO_H
+#define __ASM_ARCH_REGS_GPIO_H
+
+#define S3C2410_GPIONO(bank,offset) ((bank) + (offset))
+
+#define S3C2410_GPIO_BANKA   (32*0)
+#define S3C2410_GPIO_BANKB   (32*1)
+#define S3C2410_GPIO_BANKC   (32*2)
+#define S3C2410_GPIO_BANKD   (32*3)
+#define S3C2410_GPIO_BANKE   (32*4)
+#define S3C2410_GPIO_BANKF   (32*5)
+#define S3C2410_GPIO_BANKG   (32*6)
+#define S3C2410_GPIO_BANKH   (32*7)
+
+#ifdef CONFIG_CPU_S3C2400
+#define S3C24XX_GPIO_BASE(x)  S3C2400_GPIO_BASE(x)
+#define S3C24XX_MISCCR        S3C2400_MISCCR
+#else
+#define S3C24XX_GPIO_BASE(x)  S3C2410_GPIO_BASE(x)
+#define S3C24XX_MISCCR	      S3C24XX_GPIOREG2(0x80)
+#endif /* CONFIG_CPU_S3C2400 */
+
+
+/* S3C2400 doesn't have a 1:1 mapping to S3C2410 gpio base pins */
+
+#define S3C2400_BANKNUM(pin)     (((pin) & ~31) / 32)
+#define S3C2400_BASEA2B(pin)     ((((pin) & ~31) >> 2))
+#define S3C2400_BASEC2H(pin)     ((S3C2400_BANKNUM(pin) * 10) + \
+                                 (2 * (S3C2400_BANKNUM(pin)-2)))
+
+#define S3C2400_GPIO_BASE(pin)   (pin < S3C2410_GPIO_BANKC ? \
+                                 S3C2400_BASEA2B(pin)+S3C24XX_VA_GPIO : \
+                                 S3C2400_BASEC2H(pin)+S3C24XX_VA_GPIO)
+
+
+#define S3C2410_GPIO_BASE(pin)   ((((pin) & ~31) >> 1) + S3C24XX_VA_GPIO)
+#define S3C2410_GPIO_OFFSET(pin) ((pin) & 31)
+
+/* general configuration options */
+
+#define S3C2410_GPIO_LEAVE   (0xFFFFFFFF)
+#define S3C2410_GPIO_INPUT   (0xFFFFFFF0)	/* not available on A */
+#define S3C2410_GPIO_OUTPUT  (0xFFFFFFF1)
+#define S3C2410_GPIO_IRQ     (0xFFFFFFF2)	/* not available for all */
+#define S3C2410_GPIO_SFN2    (0xFFFFFFF2)	/* bank A => addr/cs/nand */
+#define S3C2410_GPIO_SFN3    (0xFFFFFFF3)	/* not available on A */
+
+/* register address for the GPIO registers.
+ * S3C24XX_GPIOREG2 is for the second set of registers in the
+ * GPIO which move between s3c2410 and s3c2412 type systems */
+
+#define S3C2410_GPIOREG(x) ((x) + S3C24XX_VA_GPIO)
+#define S3C24XX_GPIOREG2(x) ((x) + S3C24XX_VA_GPIO2)
+
+
+/* configure GPIO ports A..G */
+
+/* port A - S3C2410: 22bits, zero in bit X makes pin X output
+ *          S3C2400: 18bits, zero in bit X makes pin X output
+ * 1 makes port special function, this is default
+*/
+#define S3C2410_GPACON	   S3C2410_GPIOREG(0x00)
+#define S3C2410_GPADAT	   S3C2410_GPIOREG(0x04)
+
+#define S3C2400_GPACON	   S3C2410_GPIOREG(0x00)
+#define S3C2400_GPADAT	   S3C2410_GPIOREG(0x04)
+
+#define S3C2410_GPA0         S3C2410_GPIONO(S3C2410_GPIO_BANKA, 0)
+#define S3C2410_GPA0_OUT     (0<<0)
+#define S3C2410_GPA0_ADDR0   (1<<0)
+
+#define S3C2410_GPA1         S3C2410_GPIONO(S3C2410_GPIO_BANKA, 1)
+#define S3C2410_GPA1_OUT     (0<<1)
+#define S3C2410_GPA1_ADDR16  (1<<1)
+
+#define S3C2410_GPA2         S3C2410_GPIONO(S3C2410_GPIO_BANKA, 2)
+#define S3C2410_GPA2_OUT     (0<<2)
+#define S3C2410_GPA2_ADDR17  (1<<2)
+
+#define S3C2410_GPA3         S3C2410_GPIONO(S3C2410_GPIO_BANKA, 3)
+#define S3C2410_GPA3_OUT     (0<<3)
+#define S3C2410_GPA3_ADDR18  (1<<3)
+
+#define S3C2410_GPA4         S3C2410_GPIONO(S3C2410_GPIO_BANKA, 4)
+#define S3C2410_GPA4_OUT     (0<<4)
+#define S3C2410_GPA4_ADDR19  (1<<4)
+
+#define S3C2410_GPA5         S3C2410_GPIONO(S3C2410_GPIO_BANKA, 5)
+#define S3C2410_GPA5_OUT     (0<<5)
+#define S3C2410_GPA5_ADDR20  (1<<5)
+
+#define S3C2410_GPA6         S3C2410_GPIONO(S3C2410_GPIO_BANKA, 6)
+#define S3C2410_GPA6_OUT     (0<<6)
+#define S3C2410_GPA6_ADDR21  (1<<6)
+
+#define S3C2410_GPA7         S3C2410_GPIONO(S3C2410_GPIO_BANKA, 7)
+#define S3C2410_GPA7_OUT     (0<<7)
+#define S3C2410_GPA7_ADDR22  (1<<7)
+
+#define S3C2410_GPA8         S3C2410_GPIONO(S3C2410_GPIO_BANKA, 8)
+#define S3C2410_GPA8_OUT     (0<<8)
+#define S3C2410_GPA8_ADDR23  (1<<8)
+
+#define S3C2410_GPA9         S3C2410_GPIONO(S3C2410_GPIO_BANKA, 9)
+#define S3C2410_GPA9_OUT     (0<<9)
+#define S3C2410_GPA9_ADDR24  (1<<9)
+
+#define S3C2410_GPA10        S3C2410_GPIONO(S3C2410_GPIO_BANKA, 10)
+#define S3C2410_GPA10_OUT    (0<<10)
+#define S3C2410_GPA10_ADDR25 (1<<10)
+#define S3C2400_GPA10_SCKE   (1<<10)
+
+#define S3C2410_GPA11        S3C2410_GPIONO(S3C2410_GPIO_BANKA, 11)
+#define S3C2410_GPA11_OUT    (0<<11)
+#define S3C2410_GPA11_ADDR26 (1<<11)
+#define S3C2400_GPA11_nCAS0  (1<<11)
+
+#define S3C2410_GPA12        S3C2410_GPIONO(S3C2410_GPIO_BANKA, 12)
+#define S3C2410_GPA12_OUT    (0<<12)
+#define S3C2410_GPA12_nGCS1  (1<<12)
+#define S3C2400_GPA12_nCAS1  (1<<12)
+
+#define S3C2410_GPA13        S3C2410_GPIONO(S3C2410_GPIO_BANKA, 13)
+#define S3C2410_GPA13_OUT    (0<<13)
+#define S3C2410_GPA13_nGCS2  (1<<13)
+#define S3C2400_GPA13_nGCS1  (1<<13)
+
+#define S3C2410_GPA14        S3C2410_GPIONO(S3C2410_GPIO_BANKA, 14)
+#define S3C2410_GPA14_OUT    (0<<14)
+#define S3C2410_GPA14_nGCS3  (1<<14)
+#define S3C2400_GPA14_nGCS2  (1<<14)
+
+#define S3C2410_GPA15        S3C2410_GPIONO(S3C2410_GPIO_BANKA, 15)
+#define S3C2410_GPA15_OUT    (0<<15)
+#define S3C2410_GPA15_nGCS4  (1<<15)
+#define S3C2400_GPA15_nGCS3  (1<<15)
+
+#define S3C2410_GPA16        S3C2410_GPIONO(S3C2410_GPIO_BANKA, 16)
+#define S3C2410_GPA16_OUT    (0<<16)
+#define S3C2410_GPA16_nGCS5  (1<<16)
+#define S3C2400_GPA16_nGCS4  (1<<16)
+
+#define S3C2410_GPA17        S3C2410_GPIONO(S3C2410_GPIO_BANKA, 17)
+#define S3C2410_GPA17_OUT    (0<<17)
+#define S3C2410_GPA17_CLE    (1<<17)
+#define S3C2400_GPA17_nGCS5  (1<<17)
+
+#define S3C2410_GPA18        S3C2410_GPIONO(S3C2410_GPIO_BANKA, 18)
+#define S3C2410_GPA18_OUT    (0<<18)
+#define S3C2410_GPA18_ALE    (1<<18)
+
+#define S3C2410_GPA19        S3C2410_GPIONO(S3C2410_GPIO_BANKA, 19)
+#define S3C2410_GPA19_OUT    (0<<19)
+#define S3C2410_GPA19_nFWE   (1<<19)
+
+#define S3C2410_GPA20        S3C2410_GPIONO(S3C2410_GPIO_BANKA, 20)
+#define S3C2410_GPA20_OUT    (0<<20)
+#define S3C2410_GPA20_nFRE   (1<<20)
+
+#define S3C2410_GPA21        S3C2410_GPIONO(S3C2410_GPIO_BANKA, 21)
+#define S3C2410_GPA21_OUT    (0<<21)
+#define S3C2410_GPA21_nRSTOUT (1<<21)
+
+#define S3C2410_GPA22        S3C2410_GPIONO(S3C2410_GPIO_BANKA, 22)
+#define S3C2410_GPA22_OUT    (0<<22)
+#define S3C2410_GPA22_nFCE   (1<<22)
+
+/* 0x08 and 0x0c are reserved on S3C2410 */
+
+/* S3C2410:
+ * GPB is 10 IO pins, each configured by 2 bits each in GPBCON.
+ *   00 = input, 01 = output, 10=special function, 11=reserved
+
+ * S3C2400:
+ * GPB is 16 IO pins, each configured by 2 bits each in GPBCON.
+ *   00 = input, 01 = output, 10=data, 11=special function
+
+ * bit 0,1 = pin 0, 2,3= pin 1...
+ *
+ * CPBUP = pull up resistor control, 1=disabled, 0=enabled
+*/
+
+#define S3C2410_GPBCON	   S3C2410_GPIOREG(0x10)
+#define S3C2410_GPBDAT	   S3C2410_GPIOREG(0x14)
+#define S3C2410_GPBUP	   S3C2410_GPIOREG(0x18)
+
+#define S3C2400_GPBCON	   S3C2410_GPIOREG(0x08)
+#define S3C2400_GPBDAT	   S3C2410_GPIOREG(0x0C)
+#define S3C2400_GPBUP	   S3C2410_GPIOREG(0x10)
+
+/* no i/o pin in port b can have value 3 (unless it is a s3c2443) ! */
+
+#define S3C2410_GPB0         S3C2410_GPIONO(S3C2410_GPIO_BANKB, 0)
+#define S3C2410_GPB0_INP     (0x00 << 0)
+#define S3C2410_GPB0_OUTP    (0x01 << 0)
+#define S3C2410_GPB0_TOUT0   (0x02 << 0)
+#define S3C2400_GPB0_DATA16  (0x02 << 0)
+
+#define S3C2410_GPB1         S3C2410_GPIONO(S3C2410_GPIO_BANKB, 1)
+#define S3C2410_GPB1_INP     (0x00 << 2)
+#define S3C2410_GPB1_OUTP    (0x01 << 2)
+#define S3C2410_GPB1_TOUT1   (0x02 << 2)
+#define S3C2400_GPB1_DATA17  (0x02 << 2)
+
+#define S3C2410_GPB2         S3C2410_GPIONO(S3C2410_GPIO_BANKB, 2)
+#define S3C2410_GPB2_INP     (0x00 << 4)
+#define S3C2410_GPB2_OUTP    (0x01 << 4)
+#define S3C2410_GPB2_TOUT2   (0x02 << 4)
+#define S3C2400_GPB2_DATA18  (0x02 << 4)
+#define S3C2400_GPB2_TCLK1   (0x03 << 4)
+
+#define S3C2410_GPB3         S3C2410_GPIONO(S3C2410_GPIO_BANKB, 3)
+#define S3C2410_GPB3_INP     (0x00 << 6)
+#define S3C2410_GPB3_OUTP    (0x01 << 6)
+#define S3C2410_GPB3_TOUT3   (0x02 << 6)
+#define S3C2400_GPB3_DATA19  (0x02 << 6)
+#define S3C2400_GPB3_TXD1    (0x03 << 6)
+
+#define S3C2410_GPB4         S3C2410_GPIONO(S3C2410_GPIO_BANKB, 4)
+#define S3C2410_GPB4_INP     (0x00 << 8)
+#define S3C2410_GPB4_OUTP    (0x01 << 8)
+#define S3C2410_GPB4_TCLK0   (0x02 << 8)
+#define S3C2400_GPB4_DATA20  (0x02 << 8)
+#define S3C2410_GPB4_MASK    (0x03 << 8)
+#define S3C2400_GPB4_RXD1    (0x03 << 8)
+#define S3C2400_GPB4_MASK    (0x03 << 8)
+
+#define S3C2410_GPB5         S3C2410_GPIONO(S3C2410_GPIO_BANKB, 5)
+#define S3C2410_GPB5_INP     (0x00 << 10)
+#define S3C2410_GPB5_OUTP    (0x01 << 10)
+#define S3C2410_GPB5_nXBACK  (0x02 << 10)
+#define S3C2443_GPB5_XBACK   (0x03 << 10)
+#define S3C2400_GPB5_DATA21  (0x02 << 10)
+#define S3C2400_GPB5_nCTS1   (0x03 << 10)
+
+#define S3C2410_GPB6         S3C2410_GPIONO(S3C2410_GPIO_BANKB, 6)
+#define S3C2410_GPB6_INP     (0x00 << 12)
+#define S3C2410_GPB6_OUTP    (0x01 << 12)
+#define S3C2410_GPB6_nXBREQ  (0x02 << 12)
+#define S3C2443_GPB6_XBREQ   (0x03 << 12)
+#define S3C2400_GPB6_DATA22  (0x02 << 12)
+#define S3C2400_GPB6_nRTS1   (0x03 << 12)
+
+#define S3C2410_GPB7         S3C2410_GPIONO(S3C2410_GPIO_BANKB, 7)
+#define S3C2410_GPB7_INP     (0x00 << 14)
+#define S3C2410_GPB7_OUTP    (0x01 << 14)
+#define S3C2410_GPB7_nXDACK1 (0x02 << 14)
+#define S3C2443_GPB7_XDACK1  (0x03 << 14)
+#define S3C2400_GPB7_DATA23  (0x02 << 14)
+
+#define S3C2410_GPB8         S3C2410_GPIONO(S3C2410_GPIO_BANKB, 8)
+#define S3C2410_GPB8_INP     (0x00 << 16)
+#define S3C2410_GPB8_OUTP    (0x01 << 16)
+#define S3C2410_GPB8_nXDREQ1 (0x02 << 16)
+#define S3C2400_GPB8_DATA24  (0x02 << 16)
+
+#define S3C2410_GPB9         S3C2410_GPIONO(S3C2410_GPIO_BANKB, 9)
+#define S3C2410_GPB9_INP     (0x00 << 18)
+#define S3C2410_GPB9_OUTP    (0x01 << 18)
+#define S3C2410_GPB9_nXDACK0 (0x02 << 18)
+#define S3C2443_GPB9_XDACK0  (0x03 << 18)
+#define S3C2400_GPB9_DATA25  (0x02 << 18)
+#define S3C2400_GPB9_I2SSDI  (0x03 << 18)
+
+#define S3C2410_GPB10        S3C2410_GPIONO(S3C2410_GPIO_BANKB, 10)
+#define S3C2410_GPB10_INP    (0x00 << 20)
+#define S3C2410_GPB10_OUTP   (0x01 << 20)
+#define S3C2410_GPB10_nXDRE0 (0x02 << 20)
+#define S3C2443_GPB10_XDREQ0 (0x03 << 20)
+#define S3C2400_GPB10_DATA26 (0x02 << 20)
+#define S3C2400_GPB10_nSS    (0x03 << 20)
+
+#define S3C2400_GPB11        S3C2410_GPIONO(S3C2410_GPIO_BANKB, 11)
+#define S3C2400_GPB11_INP    (0x00 << 22)
+#define S3C2400_GPB11_OUTP   (0x01 << 22)
+#define S3C2400_GPB11_DATA27 (0x02 << 22)
+
+#define S3C2400_GPB12        S3C2410_GPIONO(S3C2410_GPIO_BANKB, 12)
+#define S3C2400_GPB12_INP    (0x00 << 24)
+#define S3C2400_GPB12_OUTP   (0x01 << 24)
+#define S3C2400_GPB12_DATA28 (0x02 << 24)
+
+#define S3C2400_GPB13        S3C2410_GPIONO(S3C2410_GPIO_BANKB, 13)
+#define S3C2400_GPB13_INP    (0x00 << 26)
+#define S3C2400_GPB13_OUTP   (0x01 << 26)
+#define S3C2400_GPB13_DATA29 (0x02 << 26)
+
+#define S3C2400_GPB14        S3C2410_GPIONO(S3C2410_GPIO_BANKB, 14)
+#define S3C2400_GPB14_INP    (0x00 << 28)
+#define S3C2400_GPB14_OUTP   (0x01 << 28)
+#define S3C2400_GPB14_DATA30 (0x02 << 28)
+
+#define S3C2400_GPB15        S3C2410_GPIONO(S3C2410_GPIO_BANKB, 15)
+#define S3C2400_GPB15_INP    (0x00 << 30)
+#define S3C2400_GPB15_OUTP   (0x01 << 30)
+#define S3C2400_GPB15_DATA31 (0x02 << 30)
+
+#define S3C2410_GPB_PUPDIS(x)  (1<<(x))
+
+/* Port C consits of 16 GPIO/Special function
+ *
+ * almost identical setup to port b, but the special functions are mostly
+ * to do with the video system's sync/etc.
+*/
+
+#define S3C2410_GPCCON	   S3C2410_GPIOREG(0x20)
+#define S3C2410_GPCDAT	   S3C2410_GPIOREG(0x24)
+#define S3C2410_GPCUP	   S3C2410_GPIOREG(0x28)
+
+#define S3C2400_GPCCON	   S3C2410_GPIOREG(0x14)
+#define S3C2400_GPCDAT	   S3C2410_GPIOREG(0x18)
+#define S3C2400_GPCUP	   S3C2410_GPIOREG(0x1C)
+
+#define S3C2410_GPC0            S3C2410_GPIONO(S3C2410_GPIO_BANKC, 0)
+#define S3C2410_GPC0_INP	(0x00 << 0)
+#define S3C2410_GPC0_OUTP	(0x01 << 0)
+#define S3C2410_GPC0_LEND	(0x02 << 0)
+#define S3C2400_GPC0_VD0 	(0x02 << 0)
+
+#define S3C2410_GPC1            S3C2410_GPIONO(S3C2410_GPIO_BANKC, 1)
+#define S3C2410_GPC1_INP	(0x00 << 2)
+#define S3C2410_GPC1_OUTP	(0x01 << 2)
+#define S3C2410_GPC1_VCLK	(0x02 << 2)
+#define S3C2400_GPC1_VD1 	(0x02 << 2)
+
+#define S3C2410_GPC2            S3C2410_GPIONO(S3C2410_GPIO_BANKC, 2)
+#define S3C2410_GPC2_INP	(0x00 << 4)
+#define S3C2410_GPC2_OUTP	(0x01 << 4)
+#define S3C2410_GPC2_VLINE	(0x02 << 4)
+#define S3C2400_GPC2_VD2  	(0x02 << 4)
+
+#define S3C2410_GPC3            S3C2410_GPIONO(S3C2410_GPIO_BANKC, 3)
+#define S3C2410_GPC3_INP	(0x00 << 6)
+#define S3C2410_GPC3_OUTP	(0x01 << 6)
+#define S3C2410_GPC3_VFRAME	(0x02 << 6)
+#define S3C2400_GPC3_VD3   	(0x02 << 6)
+
+#define S3C2410_GPC4            S3C2410_GPIONO(S3C2410_GPIO_BANKC, 4)
+#define S3C2410_GPC4_INP	(0x00 << 8)
+#define S3C2410_GPC4_OUTP	(0x01 << 8)
+#define S3C2410_GPC4_VM		(0x02 << 8)
+#define S3C2400_GPC4_VD4	(0x02 << 8)
+
+#define S3C2410_GPC5            S3C2410_GPIONO(S3C2410_GPIO_BANKC, 5)
+#define S3C2410_GPC5_INP	(0x00 << 10)
+#define S3C2410_GPC5_OUTP	(0x01 << 10)
+#define S3C2410_GPC5_LCDVF0	(0x02 << 10)
+#define S3C2400_GPC5_VD5   	(0x02 << 10)
+
+#define S3C2410_GPC6            S3C2410_GPIONO(S3C2410_GPIO_BANKC, 6)
+#define S3C2410_GPC6_INP	(0x00 << 12)
+#define S3C2410_GPC6_OUTP	(0x01 << 12)
+#define S3C2410_GPC6_LCDVF1	(0x02 << 12)
+#define S3C2400_GPC6_VD6   	(0x02 << 12)
+
+#define S3C2410_GPC7            S3C2410_GPIONO(S3C2410_GPIO_BANKC, 7)
+#define S3C2410_GPC7_INP	(0x00 << 14)
+#define S3C2410_GPC7_OUTP	(0x01 << 14)
+#define S3C2410_GPC7_LCDVF2	(0x02 << 14)
+#define S3C2400_GPC7_VD7   	(0x02 << 14)
+
+#define S3C2410_GPC8            S3C2410_GPIONO(S3C2410_GPIO_BANKC, 8)
+#define S3C2410_GPC8_INP	(0x00 << 16)
+#define S3C2410_GPC8_OUTP	(0x01 << 16)
+#define S3C2410_GPC8_VD0	(0x02 << 16)
+#define S3C2400_GPC8_VD8	(0x02 << 16)
+
+#define S3C2410_GPC9            S3C2410_GPIONO(S3C2410_GPIO_BANKC, 9)
+#define S3C2410_GPC9_INP	(0x00 << 18)
+#define S3C2410_GPC9_OUTP	(0x01 << 18)
+#define S3C2410_GPC9_VD1	(0x02 << 18)
+#define S3C2400_GPC9_VD9	(0x02 << 18)
+
+#define S3C2410_GPC10           S3C2410_GPIONO(S3C2410_GPIO_BANKC, 10)
+#define S3C2410_GPC10_INP	(0x00 << 20)
+#define S3C2410_GPC10_OUTP	(0x01 << 20)
+#define S3C2410_GPC10_VD2	(0x02 << 20)
+#define S3C2400_GPC10_VD10	(0x02 << 20)
+
+#define S3C2410_GPC11           S3C2410_GPIONO(S3C2410_GPIO_BANKC, 11)
+#define S3C2410_GPC11_INP	(0x00 << 22)
+#define S3C2410_GPC11_OUTP	(0x01 << 22)
+#define S3C2410_GPC11_VD3	(0x02 << 22)
+#define S3C2400_GPC11_VD11	(0x02 << 22)
+
+#define S3C2410_GPC12           S3C2410_GPIONO(S3C2410_GPIO_BANKC, 12)
+#define S3C2410_GPC12_INP	(0x00 << 24)
+#define S3C2410_GPC12_OUTP	(0x01 << 24)
+#define S3C2410_GPC12_VD4	(0x02 << 24)
+#define S3C2400_GPC12_VD12	(0x02 << 24)
+
+#define S3C2410_GPC13           S3C2410_GPIONO(S3C2410_GPIO_BANKC, 13)
+#define S3C2410_GPC13_INP	(0x00 << 26)
+#define S3C2410_GPC13_OUTP	(0x01 << 26)
+#define S3C2410_GPC13_VD5	(0x02 << 26)
+#define S3C2400_GPC13_VD13	(0x02 << 26)
+
+#define S3C2410_GPC14           S3C2410_GPIONO(S3C2410_GPIO_BANKC, 14)
+#define S3C2410_GPC14_INP	(0x00 << 28)
+#define S3C2410_GPC14_OUTP	(0x01 << 28)
+#define S3C2410_GPC14_VD6	(0x02 << 28)
+#define S3C2400_GPC14_VD14	(0x02 << 28)
+
+#define S3C2410_GPC15           S3C2410_GPIONO(S3C2410_GPIO_BANKC, 15)
+#define S3C2410_GPC15_INP	(0x00 << 30)
+#define S3C2410_GPC15_OUTP	(0x01 << 30)
+#define S3C2410_GPC15_VD7	(0x02 << 30)
+#define S3C2400_GPC15_VD15	(0x02 << 30)
+
+#define S3C2410_GPC_PUPDIS(x)  (1<<(x))
+
+/*
+ * S3C2410: Port D consists of 16 GPIO/Special function
+ *
+ * almost identical setup to port b, but the special functions are mostly
+ * to do with the video system's data.
+ *
+ * S3C2400: Port D consists of 11 GPIO/Special function
+ *
+ * almost identical setup to port c
+*/
+
+#define S3C2410_GPDCON	   S3C2410_GPIOREG(0x30)
+#define S3C2410_GPDDAT	   S3C2410_GPIOREG(0x34)
+#define S3C2410_GPDUP	   S3C2410_GPIOREG(0x38)
+
+#define S3C2400_GPDCON	   S3C2410_GPIOREG(0x20)
+#define S3C2400_GPDDAT	   S3C2410_GPIOREG(0x24)
+#define S3C2400_GPDUP	   S3C2410_GPIOREG(0x28)
+
+#define S3C2410_GPD0            S3C2410_GPIONO(S3C2410_GPIO_BANKD, 0)
+#define S3C2410_GPD0_INP	(0x00 << 0)
+#define S3C2410_GPD0_OUTP	(0x01 << 0)
+#define S3C2410_GPD0_VD8	(0x02 << 0)
+#define S3C2400_GPD0_VFRAME	(0x02 << 0)
+#define S3C2442_GPD0_nSPICS1	(0x03 << 0)
+
+#define S3C2410_GPD1            S3C2410_GPIONO(S3C2410_GPIO_BANKD, 1)
+#define S3C2410_GPD1_INP	(0x00 << 2)
+#define S3C2410_GPD1_OUTP	(0x01 << 2)
+#define S3C2410_GPD1_VD9	(0x02 << 2)
+#define S3C2400_GPD1_VM		(0x02 << 2)
+#define S3C2442_GPD1_SPICLK1	(0x03 << 2)
+
+#define S3C2410_GPD2            S3C2410_GPIONO(S3C2410_GPIO_BANKD, 2)
+#define S3C2410_GPD2_INP	(0x00 << 4)
+#define S3C2410_GPD2_OUTP	(0x01 << 4)
+#define S3C2410_GPD2_VD10	(0x02 << 4)
+#define S3C2400_GPD2_VLINE	(0x02 << 4)
+
+#define S3C2410_GPD3            S3C2410_GPIONO(S3C2410_GPIO_BANKD, 3)
+#define S3C2410_GPD3_INP	(0x00 << 6)
+#define S3C2410_GPD3_OUTP	(0x01 << 6)
+#define S3C2410_GPD3_VD11	(0x02 << 6)
+#define S3C2400_GPD3_VCLK	(0x02 << 6)
+
+#define S3C2410_GPD4            S3C2410_GPIONO(S3C2410_GPIO_BANKD, 4)
+#define S3C2410_GPD4_INP	(0x00 << 8)
+#define S3C2410_GPD4_OUTP	(0x01 << 8)
+#define S3C2410_GPD4_VD12	(0x02 << 8)
+#define S3C2400_GPD4_LEND	(0x02 << 8)
+
+#define S3C2410_GPD5            S3C2410_GPIONO(S3C2410_GPIO_BANKD, 5)
+#define S3C2410_GPD5_INP	(0x00 << 10)
+#define S3C2410_GPD5_OUTP	(0x01 << 10)
+#define S3C2410_GPD5_VD13	(0x02 << 10)
+#define S3C2400_GPD5_TOUT0	(0x02 << 10)
+
+#define S3C2410_GPD6            S3C2410_GPIONO(S3C2410_GPIO_BANKD, 6)
+#define S3C2410_GPD6_INP	(0x00 << 12)
+#define S3C2410_GPD6_OUTP	(0x01 << 12)
+#define S3C2410_GPD6_VD14	(0x02 << 12)
+#define S3C2400_GPD6_TOUT1	(0x02 << 12)
+
+#define S3C2410_GPD7            S3C2410_GPIONO(S3C2410_GPIO_BANKD, 7)
+#define S3C2410_GPD7_INP	(0x00 << 14)
+#define S3C2410_GPD7_OUTP	(0x01 << 14)
+#define S3C2410_GPD7_VD15	(0x02 << 14)
+#define S3C2400_GPD7_TOUT2	(0x02 << 14)
+
+#define S3C2410_GPD8            S3C2410_GPIONO(S3C2410_GPIO_BANKD, 8)
+#define S3C2410_GPD8_INP	(0x00 << 16)
+#define S3C2410_GPD8_OUTP	(0x01 << 16)
+#define S3C2410_GPD8_VD16	(0x02 << 16)
+#define S3C2400_GPD8_TOUT3	(0x02 << 16)
+
+#define S3C2410_GPD9            S3C2410_GPIONO(S3C2410_GPIO_BANKD, 9)
+#define S3C2410_GPD9_INP	(0x00 << 18)
+#define S3C2410_GPD9_OUTP	(0x01 << 18)
+#define S3C2410_GPD9_VD17	(0x02 << 18)
+#define S3C2400_GPD9_TCLK0	(0x02 << 18)
+#define S3C2410_GPD9_MASK       (0x03 << 18)
+
+#define S3C2410_GPD10           S3C2410_GPIONO(S3C2410_GPIO_BANKD, 10)
+#define S3C2410_GPD10_INP	(0x00 << 20)
+#define S3C2410_GPD10_OUTP	(0x01 << 20)
+#define S3C2410_GPD10_VD18	(0x02 << 20)
+#define S3C2400_GPD10_nWAIT	(0x02 << 20)
+
+#define S3C2410_GPD11           S3C2410_GPIONO(S3C2410_GPIO_BANKD, 11)
+#define S3C2410_GPD11_INP	(0x00 << 22)
+#define S3C2410_GPD11_OUTP	(0x01 << 22)
+#define S3C2410_GPD11_VD19	(0x02 << 22)
+
+#define S3C2410_GPD12           S3C2410_GPIONO(S3C2410_GPIO_BANKD, 12)
+#define S3C2410_GPD12_INP	(0x00 << 24)
+#define S3C2410_GPD12_OUTP	(0x01 << 24)
+#define S3C2410_GPD12_VD20	(0x02 << 24)
+
+#define S3C2410_GPD13           S3C2410_GPIONO(S3C2410_GPIO_BANKD, 13)
+#define S3C2410_GPD13_INP	(0x00 << 26)
+#define S3C2410_GPD13_OUTP	(0x01 << 26)
+#define S3C2410_GPD13_VD21	(0x02 << 26)
+
+#define S3C2410_GPD14           S3C2410_GPIONO(S3C2410_GPIO_BANKD, 14)
+#define S3C2410_GPD14_INP	(0x00 << 28)
+#define S3C2410_GPD14_OUTP	(0x01 << 28)
+#define S3C2410_GPD14_VD22	(0x02 << 28)
+#define S3C2410_GPD14_nSS1	(0x03 << 28)
+
+#define S3C2410_GPD15           S3C2410_GPIONO(S3C2410_GPIO_BANKD, 15)
+#define S3C2410_GPD15_INP	(0x00 << 30)
+#define S3C2410_GPD15_OUTP	(0x01 << 30)
+#define S3C2410_GPD15_VD23	(0x02 << 30)
+#define S3C2410_GPD15_nSS0	(0x03 << 30)
+
+#define S3C2410_GPD_PUPDIS(x)  (1<<(x))
+
+/* S3C2410:
+ * Port E consists of 16 GPIO/Special function
+ *
+ * again, the same as port B, but dealing with I2S, SDI, and
+ * more miscellaneous functions
+ *
+ * S3C2400:
+ * Port E consists of 12 GPIO/Special function
+ *
+ * GPIO / interrupt inputs
+*/
+
+#define S3C2410_GPECON	   S3C2410_GPIOREG(0x40)
+#define S3C2410_GPEDAT	   S3C2410_GPIOREG(0x44)
+#define S3C2410_GPEUP	   S3C2410_GPIOREG(0x48)
+
+#define S3C2400_GPECON	   S3C2410_GPIOREG(0x2C)
+#define S3C2400_GPEDAT	   S3C2410_GPIOREG(0x30)
+#define S3C2400_GPEUP	   S3C2410_GPIOREG(0x34)
+
+#define S3C2410_GPE0           S3C2410_GPIONO(S3C2410_GPIO_BANKE, 0)
+#define S3C2410_GPE0_INP       (0x00 << 0)
+#define S3C2410_GPE0_OUTP      (0x01 << 0)
+#define S3C2410_GPE0_I2SLRCK   (0x02 << 0)
+#define S3C2443_GPE0_AC_nRESET (0x03 << 0)
+#define S3C2400_GPE0_EINT0     (0x02 << 0)
+#define S3C2410_GPE0_MASK      (0x03 << 0)
+
+#define S3C2410_GPE1           S3C2410_GPIONO(S3C2410_GPIO_BANKE, 1)
+#define S3C2410_GPE1_INP       (0x00 << 2)
+#define S3C2410_GPE1_OUTP      (0x01 << 2)
+#define S3C2410_GPE1_I2SSCLK   (0x02 << 2)
+#define S3C2443_GPE1_AC_SYNC   (0x03 << 2)
+#define S3C2400_GPE1_EINT1     (0x02 << 2)
+#define S3C2400_GPE1_nSS       (0x03 << 2)
+#define S3C2410_GPE1_MASK      (0x03 << 2)
+
+#define S3C2410_GPE2           S3C2410_GPIONO(S3C2410_GPIO_BANKE, 2)
+#define S3C2410_GPE2_INP       (0x00 << 4)
+#define S3C2410_GPE2_OUTP      (0x01 << 4)
+#define S3C2410_GPE2_CDCLK     (0x02 << 4)
+#define S3C2443_GPE2_AC_BITCLK (0x03 << 4)
+#define S3C2400_GPE2_EINT2     (0x02 << 4)
+#define S3C2400_GPE2_I2SSDI    (0x03 << 4)
+
+#define S3C2410_GPE3           S3C2410_GPIONO(S3C2410_GPIO_BANKE, 3)
+#define S3C2410_GPE3_INP       (0x00 << 6)
+#define S3C2410_GPE3_OUTP      (0x01 << 6)
+#define S3C2410_GPE3_I2SSDI    (0x02 << 6)
+#define S3C2443_GPE3_AC_SDI    (0x03 << 6)
+#define S3C2400_GPE3_EINT3     (0x02 << 6)
+#define S3C2400_GPE3_nCTS1     (0x03 << 6)
+#define S3C2410_GPE3_nSS0      (0x03 << 6)
+#define S3C2410_GPE3_MASK      (0x03 << 6)
+
+#define S3C2410_GPE4           S3C2410_GPIONO(S3C2410_GPIO_BANKE, 4)
+#define S3C2410_GPE4_INP       (0x00 << 8)
+#define S3C2410_GPE4_OUTP      (0x01 << 8)
+#define S3C2410_GPE4_I2SSDO    (0x02 << 8)
+#define S3C2443_GPE4_AC_SDO    (0x03 << 8)
+#define S3C2400_GPE4_EINT4     (0x02 << 8)
+#define S3C2400_GPE4_nRTS1     (0x03 << 8)
+#define S3C2410_GPE4_I2SSDI    (0x03 << 8)
+#define S3C2410_GPE4_MASK      (0x03 << 8)
+
+#define S3C2410_GPE5           S3C2410_GPIONO(S3C2410_GPIO_BANKE, 5)
+#define S3C2410_GPE5_INP       (0x00 << 10)
+#define S3C2410_GPE5_OUTP      (0x01 << 10)
+#define S3C2410_GPE5_SDCLK     (0x02 << 10)
+#define S3C2443_GPE5_SD1_CLK   (0x02 << 10)
+#define S3C2400_GPE5_EINT5     (0x02 << 10)
+#define S3C2400_GPE5_TCLK1     (0x03 << 10)
+
+#define S3C2410_GPE6           S3C2410_GPIONO(S3C2410_GPIO_BANKE, 6)
+#define S3C2410_GPE6_INP       (0x00 << 12)
+#define S3C2410_GPE6_OUTP      (0x01 << 12)
+#define S3C2410_GPE6_SDCMD     (0x02 << 12)
+#define S3C2443_GPE6_SD1_CMD   (0x02 << 12)
+#define S3C2443_GPE6_AC_BITCLK (0x03 << 12)
+#define S3C2400_GPE6_EINT6     (0x02 << 12)
+
+#define S3C2410_GPE7           S3C2410_GPIONO(S3C2410_GPIO_BANKE, 7)
+#define S3C2410_GPE7_INP       (0x00 << 14)
+#define S3C2410_GPE7_OUTP      (0x01 << 14)
+#define S3C2410_GPE7_SDDAT0    (0x02 << 14)
+#define S3C2443_GPE5_SD1_DAT0  (0x02 << 14)
+#define S3C2443_GPE7_AC_SDI    (0x03 << 14)
+#define S3C2400_GPE7_EINT7     (0x02 << 14)
+
+#define S3C2410_GPE8           S3C2410_GPIONO(S3C2410_GPIO_BANKE, 8)
+#define S3C2410_GPE8_INP       (0x00 << 16)
+#define S3C2410_GPE8_OUTP      (0x01 << 16)
+#define S3C2410_GPE8_SDDAT1    (0x02 << 16)
+#define S3C2443_GPE8_SD1_DAT1  (0x02 << 16)
+#define S3C2443_GPE8_AC_SDO    (0x03 << 16)
+#define S3C2400_GPE8_nXDACK0   (0x02 << 16)
+
+#define S3C2410_GPE9           S3C2410_GPIONO(S3C2410_GPIO_BANKE, 9)
+#define S3C2410_GPE9_INP       (0x00 << 18)
+#define S3C2410_GPE9_OUTP      (0x01 << 18)
+#define S3C2410_GPE9_SDDAT2    (0x02 << 18)
+#define S3C2443_GPE9_SD1_DAT2  (0x02 << 18)
+#define S3C2443_GPE9_AC_SYNC   (0x03 << 18)
+#define S3C2400_GPE9_nXDACK1   (0x02 << 18)
+#define S3C2400_GPE9_nXBACK    (0x03 << 18)
+
+#define S3C2410_GPE10          S3C2410_GPIONO(S3C2410_GPIO_BANKE, 10)
+#define S3C2410_GPE10_INP      (0x00 << 20)
+#define S3C2410_GPE10_OUTP     (0x01 << 20)
+#define S3C2410_GPE10_SDDAT3   (0x02 << 20)
+#define S3C2443_GPE10_SD1_DAT3 (0x02 << 20)
+#define S3C2443_GPE10_AC_nRESET (0x03 << 20)
+#define S3C2400_GPE10_nXDREQ0  (0x02 << 20)
+
+#define S3C2410_GPE11          S3C2410_GPIONO(S3C2410_GPIO_BANKE, 11)
+#define S3C2410_GPE11_INP      (0x00 << 22)
+#define S3C2410_GPE11_OUTP     (0x01 << 22)
+#define S3C2410_GPE11_SPIMISO0 (0x02 << 22)
+#define S3C2400_GPE11_nXDREQ1  (0x02 << 22)
+#define S3C2400_GPE11_nXBREQ   (0x03 << 22)
+
+#define S3C2410_GPE12          S3C2410_GPIONO(S3C2410_GPIO_BANKE, 12)
+#define S3C2410_GPE12_INP      (0x00 << 24)
+#define S3C2410_GPE12_OUTP     (0x01 << 24)
+#define S3C2410_GPE12_SPIMOSI0 (0x02 << 24)
+
+#define S3C2410_GPE13          S3C2410_GPIONO(S3C2410_GPIO_BANKE, 13)
+#define S3C2410_GPE13_INP      (0x00 << 26)
+#define S3C2410_GPE13_OUTP     (0x01 << 26)
+#define S3C2410_GPE13_SPICLK0  (0x02 << 26)
+
+#define S3C2410_GPE14          S3C2410_GPIONO(S3C2410_GPIO_BANKE, 14)
+#define S3C2410_GPE14_INP      (0x00 << 28)
+#define S3C2410_GPE14_OUTP     (0x01 << 28)
+#define S3C2410_GPE14_IICSCL   (0x02 << 28)
+#define S3C2410_GPE14_MASK     (0x03 << 28)
+
+#define S3C2410_GPE15          S3C2410_GPIONO(S3C2410_GPIO_BANKE, 15)
+#define S3C2410_GPE15_INP      (0x00 << 30)
+#define S3C2410_GPE15_OUTP     (0x01 << 30)
+#define S3C2410_GPE15_IICSDA   (0x02 << 30)
+#define S3C2410_GPE15_MASK     (0x03 << 30)
+
+#define S3C2440_GPE0_ACSYNC    (0x03 << 0)
+#define S3C2440_GPE1_ACBITCLK  (0x03 << 2)
+#define S3C2440_GPE2_ACRESET   (0x03 << 4)
+#define S3C2440_GPE3_ACIN      (0x03 << 6)
+#define S3C2440_GPE4_ACOUT     (0x03 << 8)
+
+#define S3C2410_GPE_PUPDIS(x)  (1<<(x))
+
+/* S3C2410:
+ * Port F consists of 8 GPIO/Special function
+ *
+ * GPIO / interrupt inputs
+ *
+ * GPFCON has 2 bits for each of the input pins on port F
+ *   00 = 0 input, 1 output, 2 interrupt (EINT0..7), 3 undefined
+ *
+ * pull up works like all other ports.
+ *
+ * S3C2400:
+ * Port F consists of 7 GPIO/Special function
+ *
+ * GPIO/serial/misc pins
+*/
+
+#define S3C2410_GPFCON	   S3C2410_GPIOREG(0x50)
+#define S3C2410_GPFDAT	   S3C2410_GPIOREG(0x54)
+#define S3C2410_GPFUP	   S3C2410_GPIOREG(0x58)
+
+#define S3C2400_GPFCON	   S3C2410_GPIOREG(0x38)
+#define S3C2400_GPFDAT	   S3C2410_GPIOREG(0x3C)
+#define S3C2400_GPFUP	   S3C2410_GPIOREG(0x40)
+
+#define S3C2410_GPF0        S3C2410_GPIONO(S3C2410_GPIO_BANKF, 0)
+#define S3C2410_GPF0_INP    (0x00 << 0)
+#define S3C2410_GPF0_OUTP   (0x01 << 0)
+#define S3C2410_GPF0_EINT0  (0x02 << 0)
+#define S3C2400_GPF0_RXD0   (0x02 << 0)
+
+#define S3C2410_GPF1        S3C2410_GPIONO(S3C2410_GPIO_BANKF, 1)
+#define S3C2410_GPF1_INP    (0x00 << 2)
+#define S3C2410_GPF1_OUTP   (0x01 << 2)
+#define S3C2410_GPF1_EINT1  (0x02 << 2)
+#define S3C2400_GPF1_RXD1   (0x02 << 2)
+#define S3C2400_GPF1_IICSDA (0x03 << 2)
+
+#define S3C2410_GPF2        S3C2410_GPIONO(S3C2410_GPIO_BANKF, 2)
+#define S3C2410_GPF2_INP    (0x00 << 4)
+#define S3C2410_GPF2_OUTP   (0x01 << 4)
+#define S3C2410_GPF2_EINT2  (0x02 << 4)
+#define S3C2400_GPF2_TXD0   (0x02 << 4)
+
+#define S3C2410_GPF3        S3C2410_GPIONO(S3C2410_GPIO_BANKF, 3)
+#define S3C2410_GPF3_INP    (0x00 << 6)
+#define S3C2410_GPF3_OUTP   (0x01 << 6)
+#define S3C2410_GPF3_EINT3  (0x02 << 6)
+#define S3C2400_GPF3_TXD1   (0x02 << 6)
+#define S3C2400_GPF3_IICSCL (0x03 << 6)
+
+#define S3C2410_GPF4        S3C2410_GPIONO(S3C2410_GPIO_BANKF, 4)
+#define S3C2410_GPF4_INP    (0x00 << 8)
+#define S3C2410_GPF4_OUTP   (0x01 << 8)
+#define S3C2410_GPF4_EINT4  (0x02 << 8)
+#define S3C2400_GPF4_nRTS0  (0x02 << 8)
+#define S3C2400_GPF4_nXBACK (0x03 << 8)
+
+#define S3C2410_GPF5        S3C2410_GPIONO(S3C2410_GPIO_BANKF, 5)
+#define S3C2410_GPF5_INP    (0x00 << 10)
+#define S3C2410_GPF5_OUTP   (0x01 << 10)
+#define S3C2410_GPF5_EINT5  (0x02 << 10)
+#define S3C2400_GPF5_nCTS0  (0x02 << 10)
+#define S3C2400_GPF5_nXBREQ (0x03 << 10)
+
+#define S3C2410_GPF6        S3C2410_GPIONO(S3C2410_GPIO_BANKF, 6)
+#define S3C2410_GPF6_INP    (0x00 << 12)
+#define S3C2410_GPF6_OUTP   (0x01 << 12)
+#define S3C2410_GPF6_EINT6  (0x02 << 12)
+#define S3C2400_GPF6_CLKOUT (0x02 << 12)
+
+#define S3C2410_GPF7        S3C2410_GPIONO(S3C2410_GPIO_BANKF, 7)
+#define S3C2410_GPF7_INP    (0x00 << 14)
+#define S3C2410_GPF7_OUTP   (0x01 << 14)
+#define S3C2410_GPF7_EINT7  (0x02 << 14)
+
+#define S3C2410_GPF_PUPDIS(x)  (1<<(x))
+
+/* S3C2410:
+ * Port G consists of 8 GPIO/IRQ/Special function
+ *
+ * GPGCON has 2 bits for each of the input pins on port F
+ *   00 = 0 input, 1 output, 2 interrupt (EINT0..7), 3 special func
+ *
+ * pull up works like all other ports.
+ *
+ * S3C2400:
+ * Port G consists of 10 GPIO/Special function
+*/
+
+#define S3C2410_GPGCON	   S3C2410_GPIOREG(0x60)
+#define S3C2410_GPGDAT	   S3C2410_GPIOREG(0x64)
+#define S3C2410_GPGUP	   S3C2410_GPIOREG(0x68)
+
+#define S3C2400_GPGCON	   S3C2410_GPIOREG(0x44)
+#define S3C2400_GPGDAT	   S3C2410_GPIOREG(0x48)
+#define S3C2400_GPGUP	   S3C2410_GPIOREG(0x4C)
+
+#define S3C2410_GPG0          S3C2410_GPIONO(S3C2410_GPIO_BANKG, 0)
+#define S3C2410_GPG0_INP      (0x00 << 0)
+#define S3C2410_GPG0_OUTP     (0x01 << 0)
+#define S3C2410_GPG0_EINT8    (0x02 << 0)
+#define S3C2400_GPG0_I2SLRCK  (0x02 << 0)
+
+#define S3C2410_GPG1          S3C2410_GPIONO(S3C2410_GPIO_BANKG, 1)
+#define S3C2410_GPG1_INP      (0x00 << 2)
+#define S3C2410_GPG1_OUTP     (0x01 << 2)
+#define S3C2410_GPG1_EINT9    (0x02 << 2)
+#define S3C2400_GPG1_I2SSCLK  (0x02 << 2)
+
+#define S3C2410_GPG2          S3C2410_GPIONO(S3C2410_GPIO_BANKG, 2)
+#define S3C2410_GPG2_INP      (0x00 << 4)
+#define S3C2410_GPG2_OUTP     (0x01 << 4)
+#define S3C2410_GPG2_EINT10   (0x02 << 4)
+#define S3C2410_GPG2_nSS0     (0x03 << 4)
+#define S3C2400_GPG2_CDCLK    (0x02 << 4)
+
+#define S3C2410_GPG3          S3C2410_GPIONO(S3C2410_GPIO_BANKG, 3)
+#define S3C2410_GPG3_INP      (0x00 << 6)
+#define S3C2410_GPG3_OUTP     (0x01 << 6)
+#define S3C2410_GPG3_EINT11   (0x02 << 6)
+#define S3C2410_GPG3_nSS1     (0x03 << 6)
+#define S3C2400_GPG3_I2SSDO   (0x02 << 6)
+#define S3C2400_GPG3_I2SSDI   (0x03 << 6)
+
+#define S3C2410_GPG4          S3C2410_GPIONO(S3C2410_GPIO_BANKG, 4)
+#define S3C2410_GPG4_INP      (0x00 << 8)
+#define S3C2410_GPG4_OUTP     (0x01 << 8)
+#define S3C2410_GPG4_EINT12   (0x02 << 8)
+#define S3C2400_GPG4_MMCCLK   (0x02 << 8)
+#define S3C2400_GPG4_I2SSDI   (0x03 << 8)
+#define S3C2410_GPG4_LCDPWREN (0x03 << 8)
+#define S3C2443_GPG4_LCDPWRDN (0x03 << 8)
+
+#define S3C2410_GPG5          S3C2410_GPIONO(S3C2410_GPIO_BANKG, 5)
+#define S3C2410_GPG5_INP      (0x00 << 10)
+#define S3C2410_GPG5_OUTP     (0x01 << 10)
+#define S3C2410_GPG5_EINT13   (0x02 << 10)
+#define S3C2400_GPG5_MMCCMD   (0x02 << 10)
+#define S3C2400_GPG5_IICSDA   (0x03 << 10)
+#define S3C2410_GPG5_SPIMISO1 (0x03 << 10)	/* not s3c2443 */
+
+#define S3C2410_GPG6          S3C2410_GPIONO(S3C2410_GPIO_BANKG, 6)
+#define S3C2410_GPG6_INP      (0x00 << 12)
+#define S3C2410_GPG6_OUTP     (0x01 << 12)
+#define S3C2410_GPG6_EINT14   (0x02 << 12)
+#define S3C2400_GPG6_MMCDAT   (0x02 << 12)
+#define S3C2400_GPG6_IICSCL   (0x03 << 12)
+#define S3C2410_GPG6_SPIMOSI1 (0x03 << 12)
+
+#define S3C2410_GPG7          S3C2410_GPIONO(S3C2410_GPIO_BANKG, 7)
+#define S3C2410_GPG7_INP      (0x00 << 14)
+#define S3C2410_GPG7_OUTP     (0x01 << 14)
+#define S3C2410_GPG7_EINT15   (0x02 << 14)
+#define S3C2410_GPG7_SPICLK1  (0x03 << 14)
+#define S3C2400_GPG7_SPIMISO  (0x02 << 14)
+#define S3C2400_GPG7_IICSDA   (0x03 << 14)
+
+#define S3C2410_GPG8          S3C2410_GPIONO(S3C2410_GPIO_BANKG, 8)
+#define S3C2410_GPG8_INP      (0x00 << 16)
+#define S3C2410_GPG8_OUTP     (0x01 << 16)
+#define S3C2410_GPG8_EINT16   (0x02 << 16)
+#define S3C2400_GPG8_SPIMOSI  (0x02 << 16)
+#define S3C2400_GPG8_IICSCL   (0x03 << 16)
+
+#define S3C2410_GPG9          S3C2410_GPIONO(S3C2410_GPIO_BANKG, 9)
+#define S3C2410_GPG9_INP      (0x00 << 18)
+#define S3C2410_GPG9_OUTP     (0x01 << 18)
+#define S3C2410_GPG9_EINT17   (0x02 << 18)
+#define S3C2400_GPG9_SPICLK   (0x02 << 18)
+#define S3C2400_GPG9_MMCCLK   (0x03 << 18)
+
+#define S3C2410_GPG10         S3C2410_GPIONO(S3C2410_GPIO_BANKG, 10)
+#define S3C2410_GPG10_INP     (0x00 << 20)
+#define S3C2410_GPG10_OUTP    (0x01 << 20)
+#define S3C2410_GPG10_EINT18  (0x02 << 20)
+
+#define S3C2410_GPG11         S3C2410_GPIONO(S3C2410_GPIO_BANKG, 11)
+#define S3C2410_GPG11_INP     (0x00 << 22)
+#define S3C2410_GPG11_OUTP    (0x01 << 22)
+#define S3C2410_GPG11_EINT19  (0x02 << 22)
+#define S3C2410_GPG11_TCLK1   (0x03 << 22)
+#define S3C2443_GPG11_CF_nIREQ (0x03 << 22)
+
+#define S3C2410_GPG12         S3C2410_GPIONO(S3C2410_GPIO_BANKG, 12)
+#define S3C2410_GPG12_INP     (0x00 << 24)
+#define S3C2410_GPG12_OUTP    (0x01 << 24)
+#define S3C2410_GPG12_EINT20  (0x02 << 24)
+#define S3C2410_GPG12_XMON    (0x03 << 24)
+#define S3C2442_GPG12_nSPICS0 (0x03 << 24)
+#define S3C2443_GPG12_nINPACK (0x03 << 24)
+
+#define S3C2410_GPG13         S3C2410_GPIONO(S3C2410_GPIO_BANKG, 13)
+#define S3C2410_GPG13_INP     (0x00 << 26)
+#define S3C2410_GPG13_OUTP    (0x01 << 26)
+#define S3C2410_GPG13_EINT21  (0x02 << 26)
+#define S3C2410_GPG13_nXPON   (0x03 << 26)
+#define S3C2443_GPG13_CF_nREG (0x03 << 26)
+
+#define S3C2410_GPG14         S3C2410_GPIONO(S3C2410_GPIO_BANKG, 14)
+#define S3C2410_GPG14_INP     (0x00 << 28)
+#define S3C2410_GPG14_OUTP    (0x01 << 28)
+#define S3C2410_GPG14_EINT22  (0x02 << 28)
+#define S3C2410_GPG14_YMON    (0x03 << 28)
+#define S3C2443_GPG14_CF_RESET (0x03 << 28)
+
+#define S3C2410_GPG15         S3C2410_GPIONO(S3C2410_GPIO_BANKG, 15)
+#define S3C2410_GPG15_INP     (0x00 << 30)
+#define S3C2410_GPG15_OUTP    (0x01 << 30)
+#define S3C2410_GPG15_EINT23  (0x02 << 30)
+#define S3C2410_GPG15_nYPON   (0x03 << 30)
+#define S3C2443_GPG15_CF_PWR  (0x03 << 30)
+
+#define S3C2410_GPG_PUPDIS(x)  (1<<(x))
+
+/* Port H consists of11 GPIO/serial/Misc pins
+ *
+ * GPGCON has 2 bits for each of the input pins on port F
+ *   00 = 0 input, 1 output, 2 interrupt (EINT0..7), 3 special func
+ *
+ * pull up works like all other ports.
+*/
+
+#define S3C2410_GPHCON	   S3C2410_GPIOREG(0x70)
+#define S3C2410_GPHDAT	   S3C2410_GPIOREG(0x74)
+#define S3C2410_GPHUP	   S3C2410_GPIOREG(0x78)
+
+#define S3C2410_GPH0        S3C2410_GPIONO(S3C2410_GPIO_BANKH, 0)
+#define S3C2410_GPH0_INP    (0x00 << 0)
+#define S3C2410_GPH0_OUTP   (0x01 << 0)
+#define S3C2410_GPH0_nCTS0  (0x02 << 0)
+
+#define S3C2410_GPH1        S3C2410_GPIONO(S3C2410_GPIO_BANKH, 1)
+#define S3C2410_GPH1_INP    (0x00 << 2)
+#define S3C2410_GPH1_OUTP   (0x01 << 2)
+#define S3C2410_GPH1_nRTS0  (0x02 << 2)
+
+#define S3C2410_GPH2        S3C2410_GPIONO(S3C2410_GPIO_BANKH, 2)
+#define S3C2410_GPH2_INP    (0x00 << 4)
+#define S3C2410_GPH2_OUTP   (0x01 << 4)
+#define S3C2410_GPH2_TXD0   (0x02 << 4)
+
+#define S3C2410_GPH3        S3C2410_GPIONO(S3C2410_GPIO_BANKH, 3)
+#define S3C2410_GPH3_INP    (0x00 << 6)
+#define S3C2410_GPH3_OUTP   (0x01 << 6)
+#define S3C2410_GPH3_RXD0   (0x02 << 6)
+
+#define S3C2410_GPH4        S3C2410_GPIONO(S3C2410_GPIO_BANKH, 4)
+#define S3C2410_GPH4_INP    (0x00 << 8)
+#define S3C2410_GPH4_OUTP   (0x01 << 8)
+#define S3C2410_GPH4_TXD1   (0x02 << 8)
+
+#define S3C2410_GPH5        S3C2410_GPIONO(S3C2410_GPIO_BANKH, 5)
+#define S3C2410_GPH5_INP    (0x00 << 10)
+#define S3C2410_GPH5_OUTP   (0x01 << 10)
+#define S3C2410_GPH5_RXD1   (0x02 << 10)
+
+#define S3C2410_GPH6        S3C2410_GPIONO(S3C2410_GPIO_BANKH, 6)
+#define S3C2410_GPH6_INP    (0x00 << 12)
+#define S3C2410_GPH6_OUTP   (0x01 << 12)
+#define S3C2410_GPH6_TXD2   (0x02 << 12)
+#define S3C2410_GPH6_nRTS1  (0x03 << 12)
+
+#define S3C2410_GPH7        S3C2410_GPIONO(S3C2410_GPIO_BANKH, 7)
+#define S3C2410_GPH7_INP    (0x00 << 14)
+#define S3C2410_GPH7_OUTP   (0x01 << 14)
+#define S3C2410_GPH7_RXD2   (0x02 << 14)
+#define S3C2410_GPH7_nCTS1  (0x03 << 14)
+
+#define S3C2410_GPH8        S3C2410_GPIONO(S3C2410_GPIO_BANKH, 8)
+#define S3C2410_GPH8_INP    (0x00 << 16)
+#define S3C2410_GPH8_OUTP   (0x01 << 16)
+#define S3C2410_GPH8_UCLK   (0x02 << 16)
+
+#define S3C2410_GPH9          S3C2410_GPIONO(S3C2410_GPIO_BANKH, 9)
+#define S3C2410_GPH9_INP      (0x00 << 18)
+#define S3C2410_GPH9_OUTP     (0x01 << 18)
+#define S3C2410_GPH9_CLKOUT0  (0x02 << 18)
+#define S3C2442_GPH9_nSPICS0  (0x03 << 18)
+
+#define S3C2410_GPH10         S3C2410_GPIONO(S3C2410_GPIO_BANKH, 10)
+#define S3C2410_GPH10_INP     (0x00 << 20)
+#define S3C2410_GPH10_OUTP    (0x01 << 20)
+#define S3C2410_GPH10_CLKOUT1 (0x02 << 20)
+
+/* The S3C2412 and S3C2413 move the GPJ register set to after
+ * GPH, which means all registers after 0x80 are now offset by 0x10
+ * for the 2412/2413 from the 2410/2440/2442
+*/
+
+/* miscellaneous control */
+#define S3C2400_MISCCR	   S3C2410_GPIOREG(0x54)
+#define S3C2410_MISCCR	   S3C2410_GPIOREG(0x80)
+#define S3C2410_DCLKCON	   S3C2410_GPIOREG(0x84)
+
+#define S3C24XX_DCLKCON	   S3C24XX_GPIOREG2(0x84)
+
+/* see clock.h for dclk definitions */
+
+/* pullup control on databus */
+#define S3C2410_MISCCR_SPUCR_HEN    (0<<0)
+#define S3C2410_MISCCR_SPUCR_HDIS   (1<<0)
+#define S3C2410_MISCCR_SPUCR_LEN    (0<<1)
+#define S3C2410_MISCCR_SPUCR_LDIS   (1<<1)
+
+#define S3C2400_MISCCR_SPUCR_LEN    (0<<0)
+#define S3C2400_MISCCR_SPUCR_LDIS   (1<<0)
+#define S3C2400_MISCCR_SPUCR_HEN    (0<<1)
+#define S3C2400_MISCCR_SPUCR_HDIS   (1<<1)
+
+#define S3C2400_MISCCR_HZ_STOPEN    (0<<2)
+#define S3C2400_MISCCR_HZ_STOPPREV  (1<<2)
+
+#define S3C2410_MISCCR_USBDEV	    (0<<3)
+#define S3C2410_MISCCR_USBHOST	    (1<<3)
+
+#define S3C2410_MISCCR_CLK0_MPLL    (0<<4)
+#define S3C2410_MISCCR_CLK0_UPLL    (1<<4)
+#define S3C2410_MISCCR_CLK0_FCLK    (2<<4)
+#define S3C2410_MISCCR_CLK0_HCLK    (3<<4)
+#define S3C2410_MISCCR_CLK0_PCLK    (4<<4)
+#define S3C2410_MISCCR_CLK0_DCLK0   (5<<4)
+#define S3C2410_MISCCR_CLK0_MASK    (7<<4)
+
+#define S3C2412_MISCCR_CLK0_RTC	    (2<<4)
+
+#define S3C2410_MISCCR_CLK1_MPLL    (0<<8)
+#define S3C2410_MISCCR_CLK1_UPLL    (1<<8)
+#define S3C2410_MISCCR_CLK1_FCLK    (2<<8)
+#define S3C2410_MISCCR_CLK1_HCLK    (3<<8)
+#define S3C2410_MISCCR_CLK1_PCLK    (4<<8)
+#define S3C2410_MISCCR_CLK1_DCLK1   (5<<8)
+#define S3C2410_MISCCR_CLK1_MASK    (7<<8)
+
+#define S3C2412_MISCCR_CLK1_CLKsrc  (0<<8)
+
+#define S3C2410_MISCCR_USBSUSPND0   (1<<12)
+#define S3C2410_MISCCR_USBSUSPND1   (1<<13)
+
+#define S3C2410_MISCCR_nRSTCON	    (1<<16)
+
+#define S3C2410_MISCCR_nEN_SCLK0    (1<<17)
+#define S3C2410_MISCCR_nEN_SCLK1    (1<<18)
+#define S3C2410_MISCCR_nEN_SCLKE    (1<<19)	/* not 2412 */
+#define S3C2410_MISCCR_SDSLEEP	    (7<<17)
+
+/* external interrupt control... */
+/* S3C2410_EXTINT0 -> irq sense control for EINT0..EINT7
+ * S3C2410_EXTINT1 -> irq sense control for EINT8..EINT15
+ * S3C2410_EXTINT2 -> irq sense control for EINT16..EINT23
+ *
+ * note S3C2410_EXTINT2 has filtering options for EINT16..EINT23
+ *
+ * Samsung datasheet p9-25
+*/
+#define S3C2400_EXTINT0    S3C2410_GPIOREG(0x58)
+#define S3C2410_EXTINT0	   S3C2410_GPIOREG(0x88)
+#define S3C2410_EXTINT1	   S3C2410_GPIOREG(0x8C)
+#define S3C2410_EXTINT2	   S3C2410_GPIOREG(0x90)
+
+#define S3C24XX_EXTINT0	   S3C24XX_GPIOREG2(0x88)
+#define S3C24XX_EXTINT1	   S3C24XX_GPIOREG2(0x8C)
+#define S3C24XX_EXTINT2	   S3C24XX_GPIOREG2(0x90)
+
+/* values for S3C2410_EXTINT0/1/2 */
+#define S3C2410_EXTINT_LOWLEV	 (0x00)
+#define S3C2410_EXTINT_HILEV	 (0x01)
+#define S3C2410_EXTINT_FALLEDGE	 (0x02)
+#define S3C2410_EXTINT_RISEEDGE	 (0x04)
+#define S3C2410_EXTINT_BOTHEDGE	 (0x06)
+
+/* interrupt filtering conrrol for EINT16..EINT23 */
+#define S3C2410_EINFLT0	   S3C2410_GPIOREG(0x94)
+#define S3C2410_EINFLT1	   S3C2410_GPIOREG(0x98)
+#define S3C2410_EINFLT2	   S3C2410_GPIOREG(0x9C)
+#define S3C2410_EINFLT3	   S3C2410_GPIOREG(0xA0)
+
+#define S3C24XX_EINFLT0	   S3C24XX_GPIOREG2(0x94)
+#define S3C24XX_EINFLT1	   S3C24XX_GPIOREG2(0x98)
+#define S3C24XX_EINFLT2	   S3C24XX_GPIOREG2(0x9C)
+#define S3C24XX_EINFLT3	   S3C24XX_GPIOREG2(0xA0)
+
+/* values for interrupt filtering */
+#define S3C2410_EINTFLT_PCLK		(0x00)
+#define S3C2410_EINTFLT_EXTCLK		(1<<7)
+#define S3C2410_EINTFLT_WIDTHMSK(x)	((x) & 0x3f)
+
+/* removed EINTxxxx defs from here, not meant for this */
+
+/* GSTATUS have miscellaneous information in them
+ *
+ * These move between s3c2410 and s3c2412 style systems.
+ */
+
+#define S3C2410_GSTATUS0   S3C2410_GPIOREG(0x0AC)
+#define S3C2410_GSTATUS1   S3C2410_GPIOREG(0x0B0)
+#define S3C2410_GSTATUS2   S3C2410_GPIOREG(0x0B4)
+#define S3C2410_GSTATUS3   S3C2410_GPIOREG(0x0B8)
+#define S3C2410_GSTATUS4   S3C2410_GPIOREG(0x0BC)
+
+#define S3C2412_GSTATUS0   S3C2410_GPIOREG(0x0BC)
+#define S3C2412_GSTATUS1   S3C2410_GPIOREG(0x0C0)
+#define S3C2412_GSTATUS2   S3C2410_GPIOREG(0x0C4)
+#define S3C2412_GSTATUS3   S3C2410_GPIOREG(0x0C8)
+#define S3C2412_GSTATUS4   S3C2410_GPIOREG(0x0CC)
+
+#define S3C24XX_GSTATUS0   S3C24XX_GPIOREG2(0x0AC)
+#define S3C24XX_GSTATUS1   S3C24XX_GPIOREG2(0x0B0)
+#define S3C24XX_GSTATUS2   S3C24XX_GPIOREG2(0x0B4)
+#define S3C24XX_GSTATUS3   S3C24XX_GPIOREG2(0x0B8)
+#define S3C24XX_GSTATUS4   S3C24XX_GPIOREG2(0x0BC)
+
+#define S3C2410_GSTATUS0_nWAIT	   (1<<3)
+#define S3C2410_GSTATUS0_NCON	   (1<<2)
+#define S3C2410_GSTATUS0_RnB	   (1<<1)
+#define S3C2410_GSTATUS0_nBATTFLT  (1<<0)
+
+#define S3C2410_GSTATUS1_IDMASK	   (0xffff0000)
+#define S3C2410_GSTATUS1_2410	   (0x32410000)
+#define S3C2410_GSTATUS1_2412	   (0x32412001)
+#define S3C2410_GSTATUS1_2440	   (0x32440000)
+#define S3C2410_GSTATUS1_2442	   (0x32440aaa)
+
+#define S3C2410_GSTATUS2_WTRESET   (1<<2)
+#define S3C2410_GSTATUS2_OFFRESET  (1<<1)
+#define S3C2410_GSTATUS2_PONRESET  (1<<0)
+
+/* open drain control register */
+#define S3C2400_OPENCR     S3C2410_GPIOREG(0x50)
+
+#define S3C2400_OPENCR_OPC_RXD1DIS  (0<<0)
+#define S3C2400_OPENCR_OPC_RXD1EN   (1<<0)
+#define S3C2400_OPENCR_OPC_TXD1DIS  (0<<1)
+#define S3C2400_OPENCR_OPC_TXD1EN   (1<<1)
+#define S3C2400_OPENCR_OPC_CMDDIS   (0<<2)
+#define S3C2400_OPENCR_OPC_CMDEN    (1<<2)
+#define S3C2400_OPENCR_OPC_DATDIS   (0<<3)
+#define S3C2400_OPENCR_OPC_DATEN    (1<<3)
+#define S3C2400_OPENCR_OPC_MISODIS  (0<<4)
+#define S3C2400_OPENCR_OPC_MISOEN   (1<<4)
+#define S3C2400_OPENCR_OPC_MOSIDIS  (0<<5)
+#define S3C2400_OPENCR_OPC_MOSIEN   (1<<5)
+
+/* 2412/2413 sleep configuration registers */
+
+#define S3C2412_GPBSLPCON	S3C2410_GPIOREG(0x1C)
+#define S3C2412_GPCSLPCON	S3C2410_GPIOREG(0x2C)
+#define S3C2412_GPDSLPCON	S3C2410_GPIOREG(0x3C)
+#define S3C2412_GPFSLPCON	S3C2410_GPIOREG(0x5C)
+#define S3C2412_GPGSLPCON	S3C2410_GPIOREG(0x6C)
+#define S3C2412_GPHSLPCON	S3C2410_GPIOREG(0x7C)
+
+/* definitions for each pin bit */
+#define S3C2412_GPIO_SLPCON_LOW	 ( 0x00 )
+#define S3C2412_GPIO_SLPCON_HIGH ( 0x01 )
+#define S3C2412_GPIO_SLPCON_IN   ( 0x02 )
+#define S3C2412_GPIO_SLPCON_PULL ( 0x03 )
+
+#define S3C2412_SLPCON_LOW(x)	( 0x00 << ((x) * 2))
+#define S3C2412_SLPCON_HIGH(x)	( 0x01 << ((x) * 2))
+#define S3C2412_SLPCON_IN(x)	( 0x02 << ((x) * 2))
+#define S3C2412_SLPCON_PULL(x)	( 0x03 << ((x) * 2))
+#define S3C2412_SLPCON_EINT(x)	( 0x02 << ((x) * 2))  /* only IRQ pins */
+#define S3C2412_SLPCON_MASK(x)	( 0x03 << ((x) * 2))
+
+#define S3C2412_SLPCON_ALL_LOW	(0x0)
+#define S3C2412_SLPCON_ALL_HIGH	(0x11111111 | 0x44444444)
+#define S3C2412_SLPCON_ALL_IN  	(0x22222222 | 0x88888888)
+#define S3C2412_SLPCON_ALL_PULL	(0x33333333)
+
+#endif	/* __ASM_ARCH_REGS_GPIO_H */
+
diff --git a/include/asm-arm/arch-s3c2410/regs-gpioj.h b/arch/arm/mach-s3c2410/include/mach/regs-gpioj.h
index 0362332faaf0..1202ca5e99f6 100644
--- a/include/asm-arm/arch-s3c2410/regs-gpioj.h
+++ b/arch/arm/mach-s3c2410/include/mach/regs-gpioj.h
@@ -1,4 +1,4 @@
-/* linux/include/asm-arm/arch-s3c2410/regs-gpioj.h
+/* arch/arm/mach-s3c2410/include/mach/regs-gpioj.h
  *
  * Copyright (c) 2004 Simtec Electronics <linux@simtec.co.uk>
  *		      http://www.simtec.co.uk/products/SWLINUX/
diff --git a/arch/arm/mach-s3c2410/include/mach/regs-irq.h b/arch/arm/mach-s3c2410/include/mach/regs-irq.h
new file mode 100644
index 000000000000..de86ee8812bd
--- /dev/null
+++ b/arch/arm/mach-s3c2410/include/mach/regs-irq.h
@@ -0,0 +1,43 @@
+/* arch/arm/mach-s3c2410/include/mach/regs-irq.h
+ *
+ * Copyright (c) 2003 Simtec Electronics <linux@simtec.co.uk>
+ *		      http://www.simtec.co.uk/products/SWLINUX/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+
+#ifndef ___ASM_ARCH_REGS_IRQ_H
+#define ___ASM_ARCH_REGS_IRQ_H
+
+/* interrupt controller */
+
+#define S3C2410_IRQREG(x)   ((x) + S3C24XX_VA_IRQ)
+#define S3C2410_EINTREG(x)  ((x) + S3C24XX_VA_GPIO)
+#define S3C24XX_EINTREG(x)  ((x) + S3C24XX_VA_GPIO2)
+
+#define S3C2410_SRCPND	       S3C2410_IRQREG(0x000)
+#define S3C2410_INTMOD	       S3C2410_IRQREG(0x004)
+#define S3C2410_INTMSK	       S3C2410_IRQREG(0x008)
+#define S3C2410_PRIORITY       S3C2410_IRQREG(0x00C)
+#define S3C2410_INTPND	       S3C2410_IRQREG(0x010)
+#define S3C2410_INTOFFSET      S3C2410_IRQREG(0x014)
+#define S3C2410_SUBSRCPND      S3C2410_IRQREG(0x018)
+#define S3C2410_INTSUBMSK      S3C2410_IRQREG(0x01C)
+
+/* mask: 0=enable, 1=disable
+ * 1 bit EINT, 4=EINT4, 23=EINT23
+ * EINT0,1,2,3 are not handled here.
+*/
+
+#define S3C2410_EINTMASK       S3C2410_EINTREG(0x0A4)
+#define S3C2410_EINTPEND       S3C2410_EINTREG(0X0A8)
+#define S3C2412_EINTMASK       S3C2410_EINTREG(0x0B4)
+#define S3C2412_EINTPEND       S3C2410_EINTREG(0X0B8)
+
+#define S3C24XX_EINTMASK       S3C24XX_EINTREG(0x0A4)
+#define S3C24XX_EINTPEND       S3C24XX_EINTREG(0X0A8)
+
+#endif /* ___ASM_ARCH_REGS_IRQ_H */
diff --git a/arch/arm/mach-s3c2410/include/mach/regs-lcd.h b/arch/arm/mach-s3c2410/include/mach/regs-lcd.h
new file mode 100644
index 000000000000..ee8f040aff5f
--- /dev/null
+++ b/arch/arm/mach-s3c2410/include/mach/regs-lcd.h
@@ -0,0 +1,162 @@
+/* arch/arm/mach-s3c2410/include/mach/regs-lcd.h
+ *
+ * Copyright (c) 2003 Simtec Electronics <linux@simtec.co.uk>
+ *		      http://www.simtec.co.uk/products/SWLINUX/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+
+#ifndef ___ASM_ARCH_REGS_LCD_H
+#define ___ASM_ARCH_REGS_LCD_H
+
+#define S3C2410_LCDREG(x)	(x)
+
+/* LCD control registers */
+#define S3C2410_LCDCON1	    S3C2410_LCDREG(0x00)
+#define S3C2410_LCDCON2	    S3C2410_LCDREG(0x04)
+#define S3C2410_LCDCON3	    S3C2410_LCDREG(0x08)
+#define S3C2410_LCDCON4	    S3C2410_LCDREG(0x0C)
+#define S3C2410_LCDCON5	    S3C2410_LCDREG(0x10)
+
+#define S3C2410_LCDCON1_CLKVAL(x)  ((x) << 8)
+#define S3C2410_LCDCON1_MMODE	   (1<<7)
+#define S3C2410_LCDCON1_DSCAN4	   (0<<5)
+#define S3C2410_LCDCON1_STN4	   (1<<5)
+#define S3C2410_LCDCON1_STN8	   (2<<5)
+#define S3C2410_LCDCON1_TFT	   (3<<5)
+
+#define S3C2410_LCDCON1_STN1BPP	   (0<<1)
+#define S3C2410_LCDCON1_STN2GREY   (1<<1)
+#define S3C2410_LCDCON1_STN4GREY   (2<<1)
+#define S3C2410_LCDCON1_STN8BPP	   (3<<1)
+#define S3C2410_LCDCON1_STN12BPP   (4<<1)
+
+#define S3C2410_LCDCON1_TFT1BPP	   (8<<1)
+#define S3C2410_LCDCON1_TFT2BPP	   (9<<1)
+#define S3C2410_LCDCON1_TFT4BPP	   (10<<1)
+#define S3C2410_LCDCON1_TFT8BPP	   (11<<1)
+#define S3C2410_LCDCON1_TFT16BPP   (12<<1)
+#define S3C2410_LCDCON1_TFT24BPP   (13<<1)
+
+#define S3C2410_LCDCON1_ENVID	   (1)
+
+#define S3C2410_LCDCON1_MODEMASK    0x1E
+
+#define S3C2410_LCDCON2_VBPD(x)	    ((x) << 24)
+#define S3C2410_LCDCON2_LINEVAL(x)  ((x) << 14)
+#define S3C2410_LCDCON2_VFPD(x)	    ((x) << 6)
+#define S3C2410_LCDCON2_VSPW(x)	    ((x) << 0)
+
+#define S3C2410_LCDCON2_GET_VBPD(x) ( ((x) >> 24) & 0xFF)
+#define S3C2410_LCDCON2_GET_VFPD(x) ( ((x) >>  6) & 0xFF)
+#define S3C2410_LCDCON2_GET_VSPW(x) ( ((x) >>  0) & 0x3F)
+
+#define S3C2410_LCDCON3_HBPD(x)	    ((x) << 19)
+#define S3C2410_LCDCON3_WDLY(x)	    ((x) << 19)
+#define S3C2410_LCDCON3_HOZVAL(x)   ((x) << 8)
+#define S3C2410_LCDCON3_HFPD(x)	    ((x) << 0)
+#define S3C2410_LCDCON3_LINEBLANK(x)((x) << 0)
+
+#define S3C2410_LCDCON3_GET_HBPD(x) ( ((x) >> 19) & 0x7F)
+#define S3C2410_LCDCON3_GET_HFPD(x) ( ((x) >>  0) & 0xFF)
+
+/* LDCCON4 changes for STN mode on the S3C2412 */
+
+#define S3C2410_LCDCON4_MVAL(x)	    ((x) << 8)
+#define S3C2410_LCDCON4_HSPW(x)	    ((x) << 0)
+#define S3C2410_LCDCON4_WLH(x)	    ((x) << 0)
+
+#define S3C2410_LCDCON4_GET_HSPW(x) ( ((x) >>  0) & 0xFF)
+
+#define S3C2410_LCDCON5_BPP24BL	    (1<<12)
+#define S3C2410_LCDCON5_FRM565	    (1<<11)
+#define S3C2410_LCDCON5_INVVCLK	    (1<<10)
+#define S3C2410_LCDCON5_INVVLINE    (1<<9)
+#define S3C2410_LCDCON5_INVVFRAME   (1<<8)
+#define S3C2410_LCDCON5_INVVD	    (1<<7)
+#define S3C2410_LCDCON5_INVVDEN	    (1<<6)
+#define S3C2410_LCDCON5_INVPWREN    (1<<5)
+#define S3C2410_LCDCON5_INVLEND	    (1<<4)
+#define S3C2410_LCDCON5_PWREN	    (1<<3)
+#define S3C2410_LCDCON5_ENLEND	    (1<<2)
+#define S3C2410_LCDCON5_BSWP	    (1<<1)
+#define S3C2410_LCDCON5_HWSWP	    (1<<0)
+
+/* framebuffer start addressed */
+#define S3C2410_LCDSADDR1   S3C2410_LCDREG(0x14)
+#define S3C2410_LCDSADDR2   S3C2410_LCDREG(0x18)
+#define S3C2410_LCDSADDR3   S3C2410_LCDREG(0x1C)
+
+#define S3C2410_LCDBANK(x)	((x) << 21)
+#define S3C2410_LCDBASEU(x)	(x)
+
+#define S3C2410_OFFSIZE(x)	((x) << 11)
+#define S3C2410_PAGEWIDTH(x)	(x)
+
+/* colour lookup and miscellaneous controls */
+
+#define S3C2410_REDLUT	   S3C2410_LCDREG(0x20)
+#define S3C2410_GREENLUT   S3C2410_LCDREG(0x24)
+#define S3C2410_BLUELUT	   S3C2410_LCDREG(0x28)
+
+#define S3C2410_DITHMODE   S3C2410_LCDREG(0x4C)
+#define S3C2410_TPAL	   S3C2410_LCDREG(0x50)
+
+#define S3C2410_TPAL_EN		(1<<24)
+
+/* interrupt info */
+#define S3C2410_LCDINTPND  S3C2410_LCDREG(0x54)
+#define S3C2410_LCDSRCPND  S3C2410_LCDREG(0x58)
+#define S3C2410_LCDINTMSK  S3C2410_LCDREG(0x5C)
+#define S3C2410_LCDINT_FIWSEL	(1<<2)
+#define	S3C2410_LCDINT_FRSYNC	(1<<1)
+#define S3C2410_LCDINT_FICNT	(1<<0)
+
+/* s3c2442 extra stn registers */
+
+#define S3C2442_REDLUT		S3C2410_LCDREG(0x20)
+#define S3C2442_GREENLUT	S3C2410_LCDREG(0x24)
+#define S3C2442_BLUELUT		S3C2410_LCDREG(0x28)
+#define S3C2442_DITHMODE	S3C2410_LCDREG(0x20)
+
+#define S3C2410_LPCSEL	   S3C2410_LCDREG(0x60)
+
+#define S3C2410_TFTPAL(x)  S3C2410_LCDREG((0x400 + (x)*4))
+
+/* S3C2412 registers */
+
+#define S3C2412_TPAL		S3C2410_LCDREG(0x20)
+
+#define S3C2412_LCDINTPND	S3C2410_LCDREG(0x24)
+#define S3C2412_LCDSRCPND	S3C2410_LCDREG(0x28)
+#define S3C2412_LCDINTMSK	S3C2410_LCDREG(0x2C)
+
+#define S3C2412_TCONSEL		S3C2410_LCDREG(0x30)
+
+#define S3C2412_LCDCON6		S3C2410_LCDREG(0x34)
+#define S3C2412_LCDCON7		S3C2410_LCDREG(0x38)
+#define S3C2412_LCDCON8		S3C2410_LCDREG(0x3C)
+#define S3C2412_LCDCON9		S3C2410_LCDREG(0x40)
+
+#define S3C2412_REDLUT(x)	S3C2410_LCDREG(0x44 + ((x)*4))
+#define S3C2412_GREENLUT(x)	S3C2410_LCDREG(0x60 + ((x)*4))
+#define S3C2412_BLUELUT(x)	S3C2410_LCDREG(0x98 + ((x)*4))
+
+#define S3C2412_FRCPAT(x)	S3C2410_LCDREG(0xB4 + ((x)*4))
+
+/* general registers */
+
+/* base of the LCD registers, where INTPND, INTSRC and then INTMSK
+ * are available. */
+
+#define S3C2410_LCDINTBASE	S3C2410_LCDREG(0x54)
+#define S3C2412_LCDINTBASE	S3C2410_LCDREG(0x24)
+
+#define S3C24XX_LCDINTPND	(0x00)
+#define S3C24XX_LCDSRCPND	(0x04)
+#define S3C24XX_LCDINTMSK	(0x08)
+
+#endif /* ___ASM_ARCH_REGS_LCD_H */
diff --git a/arch/arm/mach-s3c2410/include/mach/regs-mem.h b/arch/arm/mach-s3c2410/include/mach/regs-mem.h
new file mode 100644
index 000000000000..57759804e2fa
--- /dev/null
+++ b/arch/arm/mach-s3c2410/include/mach/regs-mem.h
@@ -0,0 +1,220 @@
+/* arch/arm/mach-s3c2410/include/mach/regs-mem.h
+ *
+ * Copyright (c) 2004 Simtec Electronics <linux@simtec.co.uk>
+ *		http://www.simtec.co.uk/products/SWLINUX/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * S3C2410 Memory Control register definitions
+*/
+
+#ifndef __ASM_ARM_MEMREGS_H
+#define __ASM_ARM_MEMREGS_H
+
+#ifndef S3C2410_MEMREG
+#define S3C2410_MEMREG(x) (S3C24XX_VA_MEMCTRL + (x))
+#endif
+
+/* bus width, and wait state control */
+#define S3C2410_BWSCON			S3C2410_MEMREG(0x0000)
+
+/* bank zero config - note, pinstrapped from OM pins! */
+#define S3C2410_BWSCON_DW0_16		(1<<1)
+#define S3C2410_BWSCON_DW0_32		(2<<1)
+
+/* bank one configs */
+#define S3C2410_BWSCON_DW1_8		(0<<4)
+#define S3C2410_BWSCON_DW1_16		(1<<4)
+#define S3C2410_BWSCON_DW1_32		(2<<4)
+#define S3C2410_BWSCON_WS1		(1<<6)
+#define S3C2410_BWSCON_ST1		(1<<7)
+
+/* bank 2 configurations */
+#define S3C2410_BWSCON_DW2_8		(0<<8)
+#define S3C2410_BWSCON_DW2_16		(1<<8)
+#define S3C2410_BWSCON_DW2_32		(2<<8)
+#define S3C2410_BWSCON_WS2		(1<<10)
+#define S3C2410_BWSCON_ST2		(1<<11)
+
+/* bank 3 configurations */
+#define S3C2410_BWSCON_DW3_8		(0<<12)
+#define S3C2410_BWSCON_DW3_16		(1<<12)
+#define S3C2410_BWSCON_DW3_32		(2<<12)
+#define S3C2410_BWSCON_WS3		(1<<14)
+#define S3C2410_BWSCON_ST3		(1<<15)
+
+/* bank 4 configurations */
+#define S3C2410_BWSCON_DW4_8		(0<<16)
+#define S3C2410_BWSCON_DW4_16		(1<<16)
+#define S3C2410_BWSCON_DW4_32		(2<<16)
+#define S3C2410_BWSCON_WS4		(1<<18)
+#define S3C2410_BWSCON_ST4		(1<<19)
+
+/* bank 5 configurations */
+#define S3C2410_BWSCON_DW5_8		(0<<20)
+#define S3C2410_BWSCON_DW5_16		(1<<20)
+#define S3C2410_BWSCON_DW5_32		(2<<20)
+#define S3C2410_BWSCON_WS5		(1<<22)
+#define S3C2410_BWSCON_ST5		(1<<23)
+
+/* bank 6 configurations */
+#define S3C2410_BWSCON_DW6_8		(0<<24)
+#define S3C2410_BWSCON_DW6_16		(1<<24)
+#define S3C2410_BWSCON_DW6_32		(2<<24)
+#define S3C2410_BWSCON_WS6		(1<<26)
+#define S3C2410_BWSCON_ST6		(1<<27)
+
+/* bank 7 configurations */
+#define S3C2410_BWSCON_DW7_8		(0<<28)
+#define S3C2410_BWSCON_DW7_16		(1<<28)
+#define S3C2410_BWSCON_DW7_32		(2<<28)
+#define S3C2410_BWSCON_WS7		(1<<30)
+#define S3C2410_BWSCON_ST7		(1<<31)
+
+/* memory set (rom, ram) */
+#define S3C2410_BANKCON0		S3C2410_MEMREG(0x0004)
+#define S3C2410_BANKCON1		S3C2410_MEMREG(0x0008)
+#define S3C2410_BANKCON2		S3C2410_MEMREG(0x000C)
+#define S3C2410_BANKCON3		S3C2410_MEMREG(0x0010)
+#define S3C2410_BANKCON4		S3C2410_MEMREG(0x0014)
+#define S3C2410_BANKCON5		S3C2410_MEMREG(0x0018)
+#define S3C2410_BANKCON6		S3C2410_MEMREG(0x001C)
+#define S3C2410_BANKCON7		S3C2410_MEMREG(0x0020)
+
+/* bank configuration registers */
+
+#define S3C2410_BANKCON_PMCnorm		(0x00)
+#define S3C2410_BANKCON_PMC4		(0x01)
+#define S3C2410_BANKCON_PMC8		(0x02)
+#define S3C2410_BANKCON_PMC16		(0x03)
+
+/* bank configurations for banks 0..7, note banks
+ * 6 and 7 have differnt configurations depending on
+ * the memory type bits */
+
+#define S3C2410_BANKCON_Tacp2		(0x0 << 2)
+#define S3C2410_BANKCON_Tacp3		(0x1 << 2)
+#define S3C2410_BANKCON_Tacp4		(0x2 << 2)
+#define S3C2410_BANKCON_Tacp6		(0x3 << 2)
+#define S3C2410_BANKCON_Tacp_SHIFT	(2)
+
+#define S3C2410_BANKCON_Tcah0		(0x0 << 4)
+#define S3C2410_BANKCON_Tcah1		(0x1 << 4)
+#define S3C2410_BANKCON_Tcah2		(0x2 << 4)
+#define S3C2410_BANKCON_Tcah4		(0x3 << 4)
+#define S3C2410_BANKCON_Tcah_SHIFT	(4)
+
+#define S3C2410_BANKCON_Tcoh0		(0x0 << 6)
+#define S3C2410_BANKCON_Tcoh1		(0x1 << 6)
+#define S3C2410_BANKCON_Tcoh2		(0x2 << 6)
+#define S3C2410_BANKCON_Tcoh4		(0x3 << 6)
+#define S3C2410_BANKCON_Tcoh_SHIFT	(6)
+
+#define S3C2410_BANKCON_Tacc1		(0x0 << 8)
+#define S3C2410_BANKCON_Tacc2		(0x1 << 8)
+#define S3C2410_BANKCON_Tacc3		(0x2 << 8)
+#define S3C2410_BANKCON_Tacc4		(0x3 << 8)
+#define S3C2410_BANKCON_Tacc6		(0x4 << 8)
+#define S3C2410_BANKCON_Tacc8		(0x5 << 8)
+#define S3C2410_BANKCON_Tacc10		(0x6 << 8)
+#define S3C2410_BANKCON_Tacc14		(0x7 << 8)
+#define S3C2410_BANKCON_Tacc_SHIFT	(8)
+
+#define S3C2410_BANKCON_Tcos0		(0x0 << 11)
+#define S3C2410_BANKCON_Tcos1		(0x1 << 11)
+#define S3C2410_BANKCON_Tcos2		(0x2 << 11)
+#define S3C2410_BANKCON_Tcos4		(0x3 << 11)
+#define S3C2410_BANKCON_Tcos_SHIFT	(11)
+
+#define S3C2410_BANKCON_Tacs0		(0x0 << 13)
+#define S3C2410_BANKCON_Tacs1		(0x1 << 13)
+#define S3C2410_BANKCON_Tacs2		(0x2 << 13)
+#define S3C2410_BANKCON_Tacs4		(0x3 << 13)
+#define S3C2410_BANKCON_Tacs_SHIFT	(13)
+
+#define S3C2410_BANKCON_SRAM		(0x0 << 15)
+#define S3C2400_BANKCON_EDODRAM		(0x2 << 15)
+#define S3C2410_BANKCON_SDRAM		(0x3 << 15)
+
+/* next bits only for EDO DRAM in 6,7 */
+#define S3C2400_BANKCON_EDO_Trcd1      (0x00 << 4)
+#define S3C2400_BANKCON_EDO_Trcd2      (0x01 << 4)
+#define S3C2400_BANKCON_EDO_Trcd3      (0x02 << 4)
+#define S3C2400_BANKCON_EDO_Trcd4      (0x03 << 4)
+
+/* CAS pulse width */
+#define S3C2400_BANKCON_EDO_PULSE1     (0x00 << 3)
+#define S3C2400_BANKCON_EDO_PULSE2     (0x01 << 3)
+
+/* CAS pre-charge */
+#define S3C2400_BANKCON_EDO_TCP1       (0x00 << 2)
+#define S3C2400_BANKCON_EDO_TCP2       (0x01 << 2)
+
+/* control column address select */
+#define S3C2400_BANKCON_EDO_SCANb8     (0x00 << 0)
+#define S3C2400_BANKCON_EDO_SCANb9     (0x01 << 0)
+#define S3C2400_BANKCON_EDO_SCANb10    (0x02 << 0)
+#define S3C2400_BANKCON_EDO_SCANb11    (0x03 << 0)
+
+/* next bits only for SDRAM in 6,7 */
+#define S3C2410_BANKCON_Trcd2		(0x00 << 2)
+#define S3C2410_BANKCON_Trcd3		(0x01 << 2)
+#define S3C2410_BANKCON_Trcd4		(0x02 << 2)
+
+/* control column address select */
+#define S3C2410_BANKCON_SCANb8		(0x00 << 0)
+#define S3C2410_BANKCON_SCANb9		(0x01 << 0)
+#define S3C2410_BANKCON_SCANb10		(0x02 << 0)
+
+#define S3C2410_REFRESH			S3C2410_MEMREG(0x0024)
+#define S3C2410_BANKSIZE		S3C2410_MEMREG(0x0028)
+#define S3C2410_MRSRB6			S3C2410_MEMREG(0x002C)
+#define S3C2410_MRSRB7			S3C2410_MEMREG(0x0030)
+
+/* refresh control */
+
+#define S3C2410_REFRESH_REFEN		(1<<23)
+#define S3C2410_REFRESH_SELF		(1<<22)
+#define S3C2410_REFRESH_REFCOUNTER	((1<<11)-1)
+
+#define S3C2410_REFRESH_TRP_MASK	(3<<20)
+#define S3C2410_REFRESH_TRP_2clk	(0<<20)
+#define S3C2410_REFRESH_TRP_3clk	(1<<20)
+#define S3C2410_REFRESH_TRP_4clk	(2<<20)
+
+#define S3C2400_REFRESH_DRAM_TRP_MASK   (3<<20)
+#define S3C2400_REFRESH_DRAM_TRP_1_5clk (0<<20)
+#define S3C2400_REFRESH_DRAM_TRP_2_5clk (1<<20)
+#define S3C2400_REFRESH_DRAM_TRP_3_5clk (2<<20)
+#define S3C2400_REFRESH_DRAM_TRP_4_5clk (3<<20)
+
+#define S3C2410_REFRESH_TSRC_MASK	(3<<18)
+#define S3C2410_REFRESH_TSRC_4clk	(0<<18)
+#define S3C2410_REFRESH_TSRC_5clk	(1<<18)
+#define S3C2410_REFRESH_TSRC_6clk	(2<<18)
+#define S3C2410_REFRESH_TSRC_7clk	(3<<18)
+
+
+/* mode select register(s) */
+
+#define  S3C2410_MRSRB_CL1		(0x00 << 4)
+#define  S3C2410_MRSRB_CL2		(0x02 << 4)
+#define  S3C2410_MRSRB_CL3		(0x03 << 4)
+
+/* bank size register */
+#define S3C2410_BANKSIZE_128M		(0x2 << 0)
+#define S3C2410_BANKSIZE_64M		(0x1 << 0)
+#define S3C2410_BANKSIZE_32M		(0x0 << 0)
+#define S3C2410_BANKSIZE_16M		(0x7 << 0)
+#define S3C2410_BANKSIZE_8M		(0x6 << 0)
+#define S3C2410_BANKSIZE_4M		(0x5 << 0)
+#define S3C2410_BANKSIZE_2M		(0x4 << 0)
+#define S3C2410_BANKSIZE_MASK		(0x7 << 0)
+#define S3C2400_BANKSIZE_MASK           (0x4 << 0)
+#define S3C2410_BANKSIZE_SCLK_EN	(1<<4)
+#define S3C2410_BANKSIZE_SCKE_EN	(1<<5)
+#define S3C2410_BANKSIZE_BURST		(1<<7)
+
+#endif /* __ASM_ARM_MEMREGS_H */
diff --git a/include/asm-arm/arch-s3c2410/regs-power.h b/arch/arm/mach-s3c2410/include/mach/regs-power.h
index 13d13b7cfe98..2d36353f57d7 100644
--- a/include/asm-arm/arch-s3c2410/regs-power.h
+++ b/arch/arm/mach-s3c2410/include/mach/regs-power.h
@@ -1,4 +1,4 @@
-/* linux/include/asm-arm/arch-s3c2410/regs-power.h
+/* arch/arm/mach-s3c2410/include/mach/regs-power.h
  *
  * Copyright (c) 2003,2004,2005,2006 Simtec Electronics <linux@simtec.co.uk>
  *		      http://armlinux.simtec.co.uk/
diff --git a/include/asm-arm/arch-s3c2410/regs-s3c2412-mem.h b/arch/arm/mach-s3c2410/include/mach/regs-s3c2412-mem.h
index c8c793e78936..a4bf27123170 100644
--- a/include/asm-arm/arch-s3c2410/regs-s3c2412-mem.h
+++ b/arch/arm/mach-s3c2410/include/mach/regs-s3c2412-mem.h
@@ -1,4 +1,4 @@
-/* linux/include/asm-arm/arch-s3c2410/regs-s3c2412-mem.h
+/* arch/arm/mach-s3c2410/include/mach/regs-s3c2412-mem.h
  *
  * Copyright (c) 2008 Simtec Electronics
  *	Ben Dooks <ben@simtec.co.uk>
diff --git a/include/asm-arm/arch-s3c2410/regs-s3c2412.h b/arch/arm/mach-s3c2410/include/mach/regs-s3c2412.h
index 783b18f5bcea..aa69dc79bc38 100644
--- a/include/asm-arm/arch-s3c2410/regs-s3c2412.h
+++ b/arch/arm/mach-s3c2410/include/mach/regs-s3c2412.h
@@ -1,4 +1,4 @@
-/* linux/include/asm-arm/arch-s3c2410/regs-s3c2412.h
+/* arch/arm/mach-s3c2410/include/mach/regs-s3c2412.h
  *
  * Copyright 2007 Simtec Electronics
  *	http://armlinux.simtec.co.uk/
diff --git a/include/asm-arm/arch-s3c2410/regs-s3c2443-clock.h b/arch/arm/mach-s3c2410/include/mach/regs-s3c2443-clock.h
index c1414658d1c5..6026d091a2fe 100644
--- a/include/asm-arm/arch-s3c2410/regs-s3c2443-clock.h
+++ b/arch/arm/mach-s3c2410/include/mach/regs-s3c2443-clock.h
@@ -1,4 +1,4 @@
-/* linux/include/asm-arm/arch-s3c2410/regs-s3c2443-clock.h
+/* arch/arm/mach-s3c2410/include/mach/regs-s3c2443-clock.h
  *
  * Copyright (c) 2007 Simtec Electronics
  *	Ben Dooks <ben@simtec.co.uk>
@@ -48,11 +48,11 @@
 #define S3C2443_CLKSRC_I2S_EPLLREF3	(3<<14)
 #define S3C2443_CLKSRC_I2S_MASK		(3<<14)
 
-#define S3C2443_CLKSRC_EPLLREF_XTAL	(2<<8)
-#define S3C2443_CLKSRC_EPLLREF_EXTCLK	(3<<8)
-#define S3C2443_CLKSRC_EPLLREF_MPLLREF	(0<<8)
-#define S3C2443_CLKSRC_EPLLREF_MPLLREF2	(1<<8)
-#define S3C2443_CLKSRC_EPLLREF_MASK	(3<<8)
+#define S3C2443_CLKSRC_EPLLREF_XTAL	(2<<7)
+#define S3C2443_CLKSRC_EPLLREF_EXTCLK	(3<<7)
+#define S3C2443_CLKSRC_EPLLREF_MPLLREF	(0<<7)
+#define S3C2443_CLKSRC_EPLLREF_MPLLREF2	(1<<7)
+#define S3C2443_CLKSRC_EPLLREF_MASK	(3<<7)
 
 #define S3C2443_CLKSRC_ESYSCLK_EPLL	(1<<6)
 #define S3C2443_CLKSRC_MSYSCLK_MPLL	(1<<4)
diff --git a/include/asm-arm/arch-s3c2410/regs-sdi.h b/arch/arm/mach-s3c2410/include/mach/regs-sdi.h
index bfb222fa4abb..cbf2d8884e30 100644
--- a/include/asm-arm/arch-s3c2410/regs-sdi.h
+++ b/arch/arm/mach-s3c2410/include/mach/regs-sdi.h
@@ -1,4 +1,4 @@
-/* linux/include/asm-arm/arch-s3c2410/regs-sdi.h
+/* arch/arm/mach-s3c2410/include/mach/regs-sdi.h
  *
  * Copyright (c) 2004 Simtec Electronics <linux@simtec.co.uk>
  *		      http://www.simtec.co.uk/products/SWLINUX/
diff --git a/arch/arm/mach-s3c2410/include/mach/reset.h b/arch/arm/mach-s3c2410/include/mach/reset.h
new file mode 100644
index 000000000000..f8c9387b049d
--- /dev/null
+++ b/arch/arm/mach-s3c2410/include/mach/reset.h
@@ -0,0 +1,22 @@
+/* arch/arm/mach-s3c2410/include/mach/reset.h
+ *
+ * Copyright (c) 2007 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *	http://armlinux.simtec.co.uk/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * S3C2410 CPU reset controls
+*/
+
+#ifndef __ASM_ARCH_RESET_H
+#define __ASM_ARCH_RESET_H __FILE__
+
+/* This allows the over-ride of the default reset code
+*/
+
+extern void (*s3c24xx_reset_hook)(void);
+
+#endif /* __ASM_ARCH_RESET_H */
diff --git a/include/asm-arm/arch-s3c2410/spi-gpio.h b/arch/arm/mach-s3c2410/include/mach/spi-gpio.h
index 73803731142a..3fe8be9ca110 100644
--- a/include/asm-arm/arch-s3c2410/spi-gpio.h
+++ b/arch/arm/mach-s3c2410/include/mach/spi-gpio.h
@@ -1,4 +1,4 @@
-/* linux/include/asm-arm/arch-s3c2410/spi-gpio.h
+/* arch/arm/mach-s3c2410/include/mach/spi-gpio.h
  *
  * Copyright (c) 2006 Simtec Electronics
  *	Ben Dooks <ben@simtec.co.uk>
diff --git a/include/asm-arm/arch-s3c2410/spi.h b/arch/arm/mach-s3c2410/include/mach/spi.h
index 352d33860b63..921b13b4f0a0 100644
--- a/include/asm-arm/arch-s3c2410/spi.h
+++ b/arch/arm/mach-s3c2410/include/mach/spi.h
@@ -1,4 +1,4 @@
-/* linux/include/asm-arm/arch-s3c2410/spi.h
+/* arch/arm/mach-s3c2410/include/mach/spi.h
  *
  * Copyright (c) 2006 Simtec Electronics
  *	Ben Dooks <ben@simtec.co.uk>
@@ -16,6 +16,7 @@
 struct s3c2410_spi_info {
 	unsigned long		 pin_cs;	/* simple gpio cs */
 	unsigned int		 num_cs;	/* total chipselects */
+	int			 bus_num;       /* bus number to use. */
 
 	void (*set_cs)(struct s3c2410_spi_info *spi, int cs, int pol);
 };
diff --git a/include/asm-arm/arch-s3c2410/system-reset.h b/arch/arm/mach-s3c2410/include/mach/system-reset.h
index 1615bce0c026..ec2defebf0d5 100644
--- a/include/asm-arm/arch-s3c2410/system-reset.h
+++ b/arch/arm/mach-s3c2410/include/mach/system-reset.h
@@ -1,4 +1,4 @@
-/* linux/include/asm-arm/arch-s3c2410/system-reset.h
+/* arch/arm/mach-s3c2410/include/mach/system-reset.h
  *
  * Copyright (c) 2008 Simtec Electronics
  *	Ben Dooks <ben@simtec.co.uk>
@@ -10,11 +10,11 @@
  * published by the Free Software Foundation.
 */
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 
 #include <asm/plat-s3c/regs-watchdog.h>
-#include <asm/arch/regs-clock.h>
+#include <mach/regs-clock.h>
 
 #include <linux/clk.h>
 #include <linux/err.h>
diff --git a/arch/arm/mach-s3c2410/include/mach/system.h b/arch/arm/mach-s3c2410/include/mach/system.h
new file mode 100644
index 000000000000..e9f676bc0116
--- /dev/null
+++ b/arch/arm/mach-s3c2410/include/mach/system.h
@@ -0,0 +1,58 @@
+/* arch/arm/mach-s3c2410/include/mach/system.h
+ *
+ * Copyright (c) 2003 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C2410 - System function defines and includes
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <mach/hardware.h>
+#include <asm/io.h>
+
+#include <mach/map.h>
+#include <mach/idle.h>
+#include <mach/reset.h>
+
+#include <mach/regs-clock.h>
+
+void (*s3c24xx_idle)(void);
+void (*s3c24xx_reset_hook)(void);
+
+void s3c24xx_default_idle(void)
+{
+	unsigned long tmp;
+	int i;
+
+	/* idle the system by using the idle mode which will wait for an
+	 * interrupt to happen before restarting the system.
+	 */
+
+	/* Warning: going into idle state upsets jtag scanning */
+
+	__raw_writel(__raw_readl(S3C2410_CLKCON) | S3C2410_CLKCON_IDLE,
+		     S3C2410_CLKCON);
+
+	/* the samsung port seems to do a loop and then unset idle.. */
+	for (i = 0; i < 50; i++) {
+		tmp += __raw_readl(S3C2410_CLKCON); /* ensure loop not optimised out */
+	}
+
+	/* this bit is not cleared on re-start... */
+
+	__raw_writel(__raw_readl(S3C2410_CLKCON) & ~S3C2410_CLKCON_IDLE,
+		     S3C2410_CLKCON);
+}
+
+static void arch_idle(void)
+{
+	if (s3c24xx_idle != NULL)
+		(s3c24xx_idle)();
+	else
+		s3c24xx_default_idle();
+}
+
+#include <mach/system-reset.h>
diff --git a/arch/arm/mach-s3c2410/include/mach/timex.h b/arch/arm/mach-s3c2410/include/mach/timex.h
new file mode 100644
index 000000000000..2a425ed0a7e0
--- /dev/null
+++ b/arch/arm/mach-s3c2410/include/mach/timex.h
@@ -0,0 +1,26 @@
+/* arch/arm/mach-s3c2410/include/mach/timex.h
+ *
+ * Copyright (c) 2003-2005 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C2410 - time parameters
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_TIMEX_H
+#define __ASM_ARCH_TIMEX_H
+
+/* CLOCK_TICK_RATE needs to be evaluatable by the cpp, so making it
+ * a variable is useless. It seems as long as we make our timers an
+ * exact multiple of HZ, any value that makes a 1->1 correspondence
+ * for the time conversion functions to/from jiffies is acceptable.
+*/
+
+
+#define CLOCK_TICK_RATE 12000000
+
+
+#endif /* __ASM_ARCH_TIMEX_H */
diff --git a/arch/arm/mach-s3c2410/include/mach/uncompress.h b/arch/arm/mach-s3c2410/include/mach/uncompress.h
new file mode 100644
index 000000000000..708e47459ffc
--- /dev/null
+++ b/arch/arm/mach-s3c2410/include/mach/uncompress.h
@@ -0,0 +1,52 @@
+/* arch/arm/mach-s3c2410/include/mach/uncompress.h
+ *
+ * Copyright (c) 2003, 2007 Simtec Electronics
+ *	http://armlinux.simtec.co.uk/
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C2410 - uncompress code
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_UNCOMPRESS_H
+#define __ASM_ARCH_UNCOMPRESS_H
+
+#include <mach/regs-gpio.h>
+#include <mach/map.h>
+
+/* working in physical space... */
+#undef S3C2410_GPIOREG
+#define S3C2410_GPIOREG(x) ((S3C24XX_PA_GPIO + (x)))
+
+#include <asm/plat-s3c/uncompress.h>
+
+static inline int is_arm926(void)
+{
+	unsigned int cpuid;
+
+	asm volatile ("mrc p15, 0, %0, c1, c0, 0" : "=r" (cpuid));
+
+	return ((cpuid & 0xff0) == 0x260);
+}
+
+static void arch_detect_cpu(void)
+{
+	unsigned int cpuid;
+
+	cpuid = *((volatile unsigned int *)S3C2410_GSTATUS1);
+	cpuid &= S3C2410_GSTATUS1_IDMASK;
+
+	if (is_arm926() || cpuid == S3C2410_GSTATUS1_2440 ||
+	    cpuid == S3C2410_GSTATUS1_2442) {
+		fifo_mask = S3C2440_UFSTAT_TXMASK;
+		fifo_max = 63 << S3C2440_UFSTAT_TXSHIFT;
+	} else {
+		fifo_mask = S3C2410_UFSTAT_TXMASK;
+		fifo_max = 15 << S3C2410_UFSTAT_TXSHIFT;
+	}
+}
+
+#endif /* __ASM_ARCH_UNCOMPRESS_H */
diff --git a/include/asm-arm/arch-s3c2410/usb-control.h b/arch/arm/mach-s3c2410/include/mach/usb-control.h
index 5bfa376e33dc..cd91d1591f31 100644
--- a/include/asm-arm/arch-s3c2410/usb-control.h
+++ b/arch/arm/mach-s3c2410/include/mach/usb-control.h
@@ -1,4 +1,4 @@
-/* linux/include/asm-arm/arch-s3c2410/usb-control.h
+/* arch/arm/mach-s3c2410/include/mach/usb-control.h
  *
  * Copyright (c) 2004 Simtec Electronics
  *	Ben Dooks <ben@simtec.co.uk>
@@ -11,7 +11,7 @@
 */
 
 #ifndef __ASM_ARCH_USBCONTROL_H
-#define __ASM_ARCH_USBCONTROL_H "include/asm-arm/arch-s3c2410/usb-control.h"
+#define __ASM_ARCH_USBCONTROL_H "arch/arm/mach-s3c2410/include/mach/usb-control.h"
 
 #define S3C_HCDFLG_USED	(1)
 
diff --git a/arch/arm/mach-s3c2410/include/mach/vmalloc.h b/arch/arm/mach-s3c2410/include/mach/vmalloc.h
new file mode 100644
index 000000000000..315b0078a34d
--- /dev/null
+++ b/arch/arm/mach-s3c2410/include/mach/vmalloc.h
@@ -0,0 +1,20 @@
+/* arch/arm/mach-s3c2410/include/mach/vmalloc.h
+ *
+ * from arch/arm/mach-iop3xx/include/mach/vmalloc.h
+ *
+ * Copyright (c) 2003 Simtec Electronics <linux@simtec.co.uk>
+ *		      http://www.simtec.co.uk/products/SWLINUX/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * S3C2410 vmalloc definition
+*/
+
+#ifndef __ASM_ARCH_VMALLOC_H
+#define __ASM_ARCH_VMALLOC_H
+
+#define VMALLOC_END	  (0xE0000000)
+
+#endif /* __ASM_ARCH_VMALLOC_H */
diff --git a/include/asm-arm/arch-s3c2410/vr1000-cpld.h b/arch/arm/mach-s3c2410/include/mach/vr1000-cpld.h
index 0557b0a5ab1d..e4119913d7c5 100644
--- a/include/asm-arm/arch-s3c2410/vr1000-cpld.h
+++ b/arch/arm/mach-s3c2410/include/mach/vr1000-cpld.h
@@ -1,4 +1,4 @@
-/* linux/include/asm-arm/arch-s3c2410/vr1000-cpld.h
+/* arch/arm/mach-s3c2410/include/mach/vr1000-cpld.h
  *
  * Copyright (c) 2003 Simtec Electronics
  *	Ben Dooks <ben@simtec.co.uk>
diff --git a/include/asm-arm/arch-s3c2410/vr1000-irq.h b/arch/arm/mach-s3c2410/include/mach/vr1000-irq.h
index 890937083c61..f53f85b4ad8b 100644
--- a/include/asm-arm/arch-s3c2410/vr1000-irq.h
+++ b/arch/arm/mach-s3c2410/include/mach/vr1000-irq.h
@@ -1,4 +1,4 @@
-/* linux/include/asm-arm/arch-s3c2410/vr1000-irq.h
+/* arch/arm/mach-s3c2410/include/mach/vr1000-irq.h
  *
  * Copyright (c) 2003,2004 Simtec Electronics
  *	Ben Dooks <ben@simtec.co.uk>
diff --git a/include/asm-arm/arch-s3c2410/vr1000-map.h b/arch/arm/mach-s3c2410/include/mach/vr1000-map.h
index 92a56a724a8c..99612fcc4eb2 100644
--- a/include/asm-arm/arch-s3c2410/vr1000-map.h
+++ b/arch/arm/mach-s3c2410/include/mach/vr1000-map.h
@@ -1,4 +1,4 @@
-/* linux/include/asm-arm/arch-s3c2410/vr1000-map.h
+/* arch/arm/mach-s3c2410/include/mach/vr1000-map.h
  *
  * Copyright (c) 2003-2005 Simtec Electronics
  *	Ben Dooks <ben@simtec.co.uk>
@@ -21,7 +21,7 @@
 #ifndef __ASM_ARCH_VR1000MAP_H
 #define __ASM_ARCH_VR1000MAP_H
 
-#include <asm/arch/bast-map.h>
+#include <mach/bast-map.h>
 
 #define VR1000_IOADDR(x) BAST_IOADDR(x)
 
diff --git a/arch/arm/mach-s3c2410/mach-amlm5900.c b/arch/arm/mach-s3c2410/mach-amlm5900.c
index a67a0685664d..f0de3c23ce78 100644
--- a/arch/arm/mach-s3c2410/mach-amlm5900.c
+++ b/arch/arm/mach-s3c2410/mach-amlm5900.c
@@ -42,15 +42,15 @@
 #include <asm/mach/irq.h>
 #include <asm/mach/flash.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 #include <asm/irq.h>
 #include <asm/mach-types.h>
-#include <asm/arch/fb.h>
+#include <mach/fb.h>
 
 #include <asm/plat-s3c/regs-serial.h>
-#include <asm/arch/regs-lcd.h>
-#include <asm/arch/regs-gpio.h>
+#include <mach/regs-lcd.h>
+#include <mach/regs-gpio.h>
 
 #include <asm/plat-s3c24xx/devs.h>
 #include <asm/plat-s3c24xx/cpu.h>
diff --git a/arch/arm/mach-s3c2410/mach-bast.c b/arch/arm/mach-s3c2410/mach-bast.c
index 965f27129707..24c6334fac89 100644
--- a/arch/arm/mach-s3c2410/mach-bast.c
+++ b/arch/arm/mach-s3c2410/mach-bast.c
@@ -29,24 +29,24 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
-#include <asm/arch/bast-map.h>
-#include <asm/arch/bast-irq.h>
-#include <asm/arch/bast-cpld.h>
+#include <mach/bast-map.h>
+#include <mach/bast-irq.h>
+#include <mach/bast-cpld.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 #include <asm/irq.h>
 #include <asm/mach-types.h>
 
 //#include <asm/debug-ll.h>
 #include <asm/plat-s3c/regs-serial.h>
-#include <asm/arch/regs-gpio.h>
-#include <asm/arch/regs-mem.h>
-#include <asm/arch/regs-lcd.h>
+#include <mach/regs-gpio.h>
+#include <mach/regs-mem.h>
+#include <mach/regs-lcd.h>
 
 #include <asm/plat-s3c/nand.h>
 #include <asm/plat-s3c/iic.h>
-#include <asm/arch/fb.h>
+#include <mach/fb.h>
 
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/nand.h>
@@ -562,7 +562,7 @@ static struct platform_device *bast_devices[] __initdata = {
 	&bast_sio,
 };
 
-static struct clk *bast_clocks[] = {
+static struct clk *bast_clocks[] __initdata = {
 	&s3c24xx_dclk0,
 	&s3c24xx_dclk1,
 	&s3c24xx_clkout0,
diff --git a/arch/arm/mach-s3c2410/mach-h1940.c b/arch/arm/mach-s3c2410/mach-h1940.c
index 7c1145e87c12..e35933a46d10 100644
--- a/arch/arm/mach-s3c2410/mach-h1940.c
+++ b/arch/arm/mach-s3c2410/mach-h1940.c
@@ -25,19 +25,19 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 #include <asm/irq.h>
 #include <asm/mach-types.h>
 
 #include <asm/plat-s3c/regs-serial.h>
-#include <asm/arch/regs-lcd.h>
-#include <asm/arch/regs-gpio.h>
-#include <asm/arch/regs-clock.h>
+#include <mach/regs-lcd.h>
+#include <mach/regs-gpio.h>
+#include <mach/regs-clock.h>
 
-#include <asm/arch/h1940.h>
-#include <asm/arch/h1940-latch.h>
-#include <asm/arch/fb.h>
+#include <mach/h1940.h>
+#include <mach/h1940-latch.h>
+#include <mach/fb.h>
 #include <asm/plat-s3c24xx/udc.h>
 
 #include <asm/plat-s3c24xx/clock.h>
diff --git a/arch/arm/mach-s3c2410/mach-n30.c b/arch/arm/mach-s3c2410/mach-n30.c
index 43c2e915c5bf..80fe2ed0775c 100644
--- a/arch/arm/mach-s3c2410/mach-n30.c
+++ b/arch/arm/mach-s3c2410/mach-n30.c
@@ -26,15 +26,15 @@
 #include <linux/serial_core.h>
 #include <linux/timer.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 #include <asm/irq.h>
 #include <asm/mach-types.h>
 
-#include <asm/arch/fb.h>
-#include <asm/arch/leds-gpio.h>
-#include <asm/arch/regs-gpio.h>
-#include <asm/arch/regs-lcd.h>
+#include <mach/fb.h>
+#include <mach/leds-gpio.h>
+#include <mach/regs-gpio.h>
+#include <mach/regs-lcd.h>
 
 #include <asm/mach/arch.h>
 #include <asm/mach/irq.h>
diff --git a/arch/arm/mach-s3c2410/mach-otom.c b/arch/arm/mach-s3c2410/mach-otom.c
index 717af40e4477..606ee15911b6 100644
--- a/arch/arm/mach-s3c2410/mach-otom.c
+++ b/arch/arm/mach-s3c2410/mach-otom.c
@@ -22,15 +22,15 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
-#include <asm/arch/otom-map.h>
+#include <mach/otom-map.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 #include <asm/irq.h>
 #include <asm/mach-types.h>
 
 #include <asm/plat-s3c/regs-serial.h>
-#include <asm/arch/regs-gpio.h>
+#include <mach/regs-gpio.h>
 
 #include <asm/plat-s3c24xx/s3c2410.h>
 #include <asm/plat-s3c24xx/clock.h>
diff --git a/arch/arm/mach-s3c2410/mach-qt2410.c b/arch/arm/mach-s3c2410/mach-qt2410.c
index a1caf4b0adac..7d34844debde 100644
--- a/arch/arm/mach-s3c2410/mach-qt2410.c
+++ b/arch/arm/mach-s3c2410/mach-qt2410.c
@@ -42,19 +42,19 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 #include <asm/irq.h>
 #include <asm/mach-types.h>
 
-#include <asm/arch/regs-gpio.h>
-#include <asm/arch/leds-gpio.h>
+#include <mach/regs-gpio.h>
+#include <mach/leds-gpio.h>
 #include <asm/plat-s3c/regs-serial.h>
-#include <asm/arch/fb.h>
+#include <mach/fb.h>
 #include <asm/plat-s3c/nand.h>
 #include <asm/plat-s3c24xx/udc.h>
-#include <asm/arch/spi.h>
-#include <asm/arch/spi-gpio.h>
+#include <mach/spi.h>
+#include <mach/spi-gpio.h>
 
 #include <asm/plat-s3c24xx/common-smdk.h>
 #include <asm/plat-s3c24xx/devs.h>
diff --git a/arch/arm/mach-s3c2410/mach-smdk2410.c b/arch/arm/mach-s3c2410/mach-smdk2410.c
index 226550504c85..b88939d72282 100644
--- a/arch/arm/mach-s3c2410/mach-smdk2410.c
+++ b/arch/arm/mach-s3c2410/mach-smdk2410.c
@@ -5,7 +5,6 @@
  * Copyright (C) 2004 by FS Forth-Systeme GmbH
  * All rights reserved.
  *
- * $Id: mach-smdk2410.c,v 1.1 2004/05/11 14:15:38 mpietrek Exp $
  * @Author: Jonas Dietsche
  *
  * This program is free software; you can redistribute it and/or
@@ -42,7 +41,7 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 #include <asm/irq.h>
 #include <asm/mach-types.h>
diff --git a/arch/arm/mach-s3c2410/mach-tct_hammer.c b/arch/arm/mach-s3c2410/mach-tct_hammer.c
index d90d445ccfb4..ec87306a8c24 100644
--- a/arch/arm/mach-s3c2410/mach-tct_hammer.c
+++ b/arch/arm/mach-s3c2410/mach-tct_hammer.c
@@ -39,7 +39,7 @@
 #include <asm/mach/irq.h>
 #include <asm/mach/flash.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 #include <asm/irq.h>
 #include <asm/mach-types.h>
diff --git a/arch/arm/mach-s3c2410/mach-vr1000.c b/arch/arm/mach-s3c2410/mach-vr1000.c
index 9a0965ac5e11..fbc0213d5485 100644
--- a/arch/arm/mach-s3c2410/mach-vr1000.c
+++ b/arch/arm/mach-s3c2410/mach-vr1000.c
@@ -30,19 +30,19 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
-#include <asm/arch/bast-map.h>
-#include <asm/arch/vr1000-map.h>
-#include <asm/arch/vr1000-irq.h>
-#include <asm/arch/vr1000-cpld.h>
+#include <mach/bast-map.h>
+#include <mach/vr1000-map.h>
+#include <mach/vr1000-irq.h>
+#include <mach/vr1000-cpld.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 #include <asm/irq.h>
 #include <asm/mach-types.h>
 
 #include <asm/plat-s3c/regs-serial.h>
-#include <asm/arch/regs-gpio.h>
-#include <asm/arch/leds-gpio.h>
+#include <mach/regs-gpio.h>
+#include <mach/leds-gpio.h>
 
 #include <asm/plat-s3c24xx/clock.h>
 #include <asm/plat-s3c24xx/devs.h>
@@ -344,7 +344,7 @@ static struct platform_device *vr1000_devices[] __initdata = {
 	&vr1000_led3,
 };
 
-static struct clk *vr1000_clocks[] = {
+static struct clk *vr1000_clocks[] __initdata = {
 	&s3c24xx_dclk0,
 	&s3c24xx_dclk1,
 	&s3c24xx_clkout0,
diff --git a/arch/arm/mach-s3c2410/nor-simtec.c b/arch/arm/mach-s3c2410/nor-simtec.c
index f44e21b9c3ba..598d130633dc 100644
--- a/arch/arm/mach-s3c2410/nor-simtec.c
+++ b/arch/arm/mach-s3c2410/nor-simtec.c
@@ -26,10 +26,11 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
-#include <asm/arch/map.h>
-#include <asm/arch/bast-map.h>
-#include <asm/arch/bast-cpld.h>
+#include <mach/map.h>
+#include <mach/bast-map.h>
+#include <mach/bast-cpld.h>
 
+#include "nor-simtec.h"
 
 static void simtec_nor_vpp(struct map_info *map, int vpp)
 {
@@ -50,7 +51,7 @@ static void simtec_nor_vpp(struct map_info *map, int vpp)
 	local_irq_restore(flags);
 }
 
-struct physmap_flash_data simtec_nor_pdata = {
+static struct physmap_flash_data simtec_nor_pdata = {
 	.width		= 2,
 	.set_vpp	= simtec_nor_vpp,
 	.nr_parts	= 0,
diff --git a/arch/arm/mach-s3c2410/pm-h1940.S b/arch/arm/mach-s3c2410/pm-h1940.S
index 7d66de7ff7db..c93bf2db9f4d 100644
--- a/arch/arm/mach-s3c2410/pm-h1940.S
+++ b/arch/arm/mach-s3c2410/pm-h1940.S
@@ -20,10 +20,10 @@
 
 #include <linux/linkage.h>
 #include <asm/assembler.h>
-#include <asm/hardware.h>
-#include <asm/arch/map.h>
+#include <mach/hardware.h>
+#include <mach/map.h>
 
-#include <asm/arch/regs-gpio.h>
+#include <mach/regs-gpio.h>
 
 	.text
 	.global	h1940_pm_return
diff --git a/arch/arm/mach-s3c2410/pm.c b/arch/arm/mach-s3c2410/pm.c
index 3b3a7db4e0dd..ba43ff9e8164 100644
--- a/arch/arm/mach-s3c2410/pm.c
+++ b/arch/arm/mach-s3c2410/pm.c
@@ -26,13 +26,13 @@
 #include <linux/time.h>
 #include <linux/sysdev.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 
 #include <asm/mach-types.h>
 
-#include <asm/arch/regs-gpio.h>
-#include <asm/arch/h1940.h>
+#include <mach/regs-gpio.h>
+#include <mach/h1940.h>
 
 #include <asm/plat-s3c24xx/cpu.h>
 #include <asm/plat-s3c24xx/pm.h>
diff --git a/arch/arm/mach-s3c2410/s3c2410.c b/arch/arm/mach-s3c2410/s3c2410.c
index 0e7991940f81..5d977f9c88ac 100644
--- a/arch/arm/mach-s3c2410/s3c2410.c
+++ b/arch/arm/mach-s3c2410/s3c2410.c
@@ -24,11 +24,11 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 #include <asm/irq.h>
 
-#include <asm/arch/regs-clock.h>
+#include <mach/regs-clock.h>
 #include <asm/plat-s3c/regs-serial.h>
 
 #include <asm/plat-s3c24xx/s3c2410.h>
diff --git a/arch/arm/mach-s3c2410/sleep.S b/arch/arm/mach-s3c2410/sleep.S
index 8a9c5a2bb252..be37f221a177 100644
--- a/arch/arm/mach-s3c2410/sleep.S
+++ b/arch/arm/mach-s3c2410/sleep.S
@@ -26,12 +26,12 @@
 
 #include <linux/linkage.h>
 #include <asm/assembler.h>
-#include <asm/hardware.h>
-#include <asm/arch/map.h>
+#include <mach/hardware.h>
+#include <mach/map.h>
 
-#include <asm/arch/regs-gpio.h>
-#include <asm/arch/regs-clock.h>
-#include <asm/arch/regs-mem.h>
+#include <mach/regs-gpio.h>
+#include <mach/regs-clock.h>
+#include <mach/regs-mem.h>
 #include <asm/plat-s3c/regs-serial.h>
 
 	/* s3c2410_cpu_suspend
diff --git a/arch/arm/mach-s3c2410/usb-simtec.c b/arch/arm/mach-s3c2410/usb-simtec.c
index 6aec86a5da56..4dacf8a1750d 100644
--- a/arch/arm/mach-s3c2410/usb-simtec.c
+++ b/arch/arm/mach-s3c2410/usb-simtec.c
@@ -26,12 +26,12 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
-#include <asm/arch/bast-map.h>
-#include <asm/arch/bast-irq.h>
-#include <asm/arch/usb-control.h>
-#include <asm/arch/regs-gpio.h>
+#include <mach/bast-map.h>
+#include <mach/bast-irq.h>
+#include <mach/usb-control.h>
+#include <mach/regs-gpio.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 #include <asm/irq.h>
 
diff --git a/arch/arm/mach-s3c2412/clock.c b/arch/arm/mach-s3c2412/clock.c
index 1157b5a16263..af4b2ce516f9 100644
--- a/arch/arm/mach-s3c2412/clock.c
+++ b/arch/arm/mach-s3c2412/clock.c
@@ -34,12 +34,12 @@
 
 #include <asm/mach/map.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 
 #include <asm/plat-s3c/regs-serial.h>
-#include <asm/arch/regs-clock.h>
-#include <asm/arch/regs-gpio.h>
+#include <mach/regs-clock.h>
+#include <mach/regs-gpio.h>
 
 #include <asm/plat-s3c24xx/s3c2412.h>
 #include <asm/plat-s3c24xx/clock.h>
diff --git a/arch/arm/mach-s3c2412/dma.c b/arch/arm/mach-s3c2412/dma.c
index 1dd864993566..22fc04a3b533 100644
--- a/arch/arm/mach-s3c2412/dma.c
+++ b/arch/arm/mach-s3c2412/dma.c
@@ -18,18 +18,18 @@
 #include <linux/serial_core.h>
 
 #include <asm/dma.h>
-#include <asm/arch/dma.h>
+#include <mach/dma.h>
 #include <asm/io.h>
 
 #include <asm/plat-s3c24xx/dma.h>
 #include <asm/plat-s3c24xx/cpu.h>
 
 #include <asm/plat-s3c/regs-serial.h>
-#include <asm/arch/regs-gpio.h>
+#include <mach/regs-gpio.h>
 #include <asm/plat-s3c/regs-ac97.h>
-#include <asm/arch/regs-mem.h>
-#include <asm/arch/regs-lcd.h>
-#include <asm/arch/regs-sdi.h>
+#include <mach/regs-mem.h>
+#include <mach/regs-lcd.h>
+#include <mach/regs-sdi.h>
 #include <asm/plat-s3c24xx/regs-s3c2412-iis.h>
 #include <asm/plat-s3c24xx/regs-iis.h>
 #include <asm/plat-s3c24xx/regs-spi.h>
diff --git a/arch/arm/mach-s3c2412/gpio.c b/arch/arm/mach-s3c2412/gpio.c
index 8e55c3a2eab8..f7afece7fc38 100644
--- a/arch/arm/mach-s3c2412/gpio.c
+++ b/arch/arm/mach-s3c2412/gpio.c
@@ -20,9 +20,9 @@
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 
-#include <asm/arch/regs-gpio.h>
+#include <mach/regs-gpio.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 
 int s3c2412_gpio_set_sleepcfg(unsigned int pin, unsigned int state)
 {
diff --git a/arch/arm/mach-s3c2412/irq.c b/arch/arm/mach-s3c2412/irq.c
index cc1917bf952a..ac62b79044f4 100644
--- a/arch/arm/mach-s3c2412/irq.c
+++ b/arch/arm/mach-s3c2412/irq.c
@@ -25,15 +25,15 @@
 #include <linux/ioport.h>
 #include <linux/sysdev.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/irq.h>
 #include <asm/io.h>
 
 #include <asm/mach/irq.h>
 
-#include <asm/arch/regs-irq.h>
-#include <asm/arch/regs-gpio.h>
-#include <asm/arch/regs-power.h>
+#include <mach/regs-irq.h>
+#include <mach/regs-gpio.h>
+#include <mach/regs-power.h>
 
 #include <asm/plat-s3c24xx/cpu.h>
 #include <asm/plat-s3c24xx/irq.h>
diff --git a/arch/arm/mach-s3c2412/mach-jive.c b/arch/arm/mach-s3c2412/mach-jive.c
index 7f5924713485..ad980a1690c2 100644
--- a/arch/arm/mach-s3c2412/mach-jive.c
+++ b/arch/arm/mach-s3c2412/mach-jive.c
@@ -26,9 +26,6 @@
 
 #include <linux/spi/spi.h>
 
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
@@ -37,12 +34,12 @@
 #include <asm/plat-s3c/nand.h>
 #include <asm/plat-s3c/iic.h>
 
-#include <asm/arch/regs-power.h>
-#include <asm/arch/regs-gpio.h>
-#include <asm/arch/regs-mem.h>
-#include <asm/arch/regs-lcd.h>
-#include <asm/arch/spi-gpio.h>
-#include <asm/arch/fb.h>
+#include <mach/regs-power.h>
+#include <mach/regs-gpio.h>
+#include <mach/regs-mem.h>
+#include <mach/regs-lcd.h>
+#include <mach/spi-gpio.h>
+#include <mach/fb.h>
 
 #include <asm/mach-types.h>
 
@@ -398,7 +395,7 @@ static void jive_lcd_spi_chipselect(struct s3c2410_spigpio_info *spi, int cs)
 }
 
 static struct s3c2410_spigpio_info jive_lcd_spi = {
-	.bus_num	= 0,
+	.bus_num	= 1,
 	.pin_clk	= S3C2410_GPG8,
 	.pin_mosi	= S3C2410_GPB8,
 	.chip_select	= jive_lcd_spi_chipselect,
diff --git a/arch/arm/mach-s3c2412/mach-smdk2413.c b/arch/arm/mach-s3c2412/mach-smdk2413.c
index b126a530daa6..80affb1ee4cd 100644
--- a/arch/arm/mach-s3c2412/mach-smdk2413.c
+++ b/arch/arm/mach-s3c2412/mach-smdk2413.c
@@ -24,7 +24,7 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/hardware/iomd.h>
 #include <asm/setup.h>
 #include <asm/io.h>
@@ -33,12 +33,12 @@
 
 //#include <asm/debug-ll.h>
 #include <asm/plat-s3c/regs-serial.h>
-#include <asm/arch/regs-gpio.h>
-#include <asm/arch/regs-lcd.h>
+#include <mach/regs-gpio.h>
+#include <mach/regs-lcd.h>
 
-#include <asm/arch/idle.h>
+#include <mach/idle.h>
 #include <asm/plat-s3c24xx/udc.h>
-#include <asm/arch/fb.h>
+#include <mach/fb.h>
 
 #include <asm/plat-s3c24xx/s3c2410.h>
 #include <asm/plat-s3c24xx/s3c2412.h>
diff --git a/arch/arm/mach-s3c2412/mach-vstms.c b/arch/arm/mach-s3c2412/mach-vstms.c
index 32982547cd63..7a08b3789915 100644
--- a/arch/arm/mach-s3c2412/mach-vstms.c
+++ b/arch/arm/mach-s3c2412/mach-vstms.c
@@ -27,18 +27,18 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/setup.h>
 #include <asm/io.h>
 #include <asm/irq.h>
 #include <asm/mach-types.h>
 
 #include <asm/plat-s3c/regs-serial.h>
-#include <asm/arch/regs-gpio.h>
-#include <asm/arch/regs-lcd.h>
+#include <mach/regs-gpio.h>
+#include <mach/regs-lcd.h>
 
-#include <asm/arch/idle.h>
-#include <asm/arch/fb.h>
+#include <mach/idle.h>
+#include <mach/fb.h>
 
 #include <asm/plat-s3c/nand.h>
 
diff --git a/arch/arm/mach-s3c2412/pm.c b/arch/arm/mach-s3c2412/pm.c
index d4ffb2d98076..737523a4e037 100644
--- a/arch/arm/mach-s3c2412/pm.c
+++ b/arch/arm/mach-s3c2412/pm.c
@@ -19,14 +19,14 @@
 #include <linux/sysdev.h>
 #include <linux/platform_device.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 #include <asm/irq.h>
 
-#include <asm/arch/regs-power.h>
-#include <asm/arch/regs-gpioj.h>
-#include <asm/arch/regs-gpio.h>
-#include <asm/arch/regs-dsc.h>
+#include <mach/regs-power.h>
+#include <mach/regs-gpioj.h>
+#include <mach/regs-gpio.h>
+#include <mach/regs-dsc.h>
 
 #include <asm/plat-s3c24xx/cpu.h>
 #include <asm/plat-s3c24xx/pm.h>
diff --git a/arch/arm/mach-s3c2412/s3c2412.c b/arch/arm/mach-s3c2412/s3c2412.c
index 98a0de924c22..d278010b9f60 100644
--- a/arch/arm/mach-s3c2412/s3c2412.c
+++ b/arch/arm/mach-s3c2412/s3c2412.c
@@ -25,22 +25,22 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/proc-fns.h>
 #include <asm/io.h>
 #include <asm/irq.h>
 
-#include <asm/arch/reset.h>
-#include <asm/arch/idle.h>
+#include <mach/reset.h>
+#include <mach/idle.h>
 
-#include <asm/arch/regs-clock.h>
+#include <mach/regs-clock.h>
 #include <asm/plat-s3c/regs-serial.h>
-#include <asm/arch/regs-power.h>
-#include <asm/arch/regs-gpio.h>
-#include <asm/arch/regs-gpioj.h>
-#include <asm/arch/regs-dsc.h>
+#include <mach/regs-power.h>
+#include <mach/regs-gpio.h>
+#include <mach/regs-gpioj.h>
+#include <mach/regs-dsc.h>
 #include <asm/plat-s3c24xx/regs-spi.h>
-#include <asm/arch/regs-s3c2412.h>
+#include <mach/regs-s3c2412.h>
 
 #include <asm/plat-s3c24xx/s3c2412.h>
 #include <asm/plat-s3c24xx/cpu.h>
diff --git a/arch/arm/mach-s3c2412/sleep.S b/arch/arm/mach-s3c2412/sleep.S
index db32cac4199a..c82418ed714d 100644
--- a/arch/arm/mach-s3c2412/sleep.S
+++ b/arch/arm/mach-s3c2412/sleep.S
@@ -22,10 +22,10 @@
 
 #include <linux/linkage.h>
 #include <asm/assembler.h>
-#include <asm/hardware.h>
-#include <asm/arch/map.h>
+#include <mach/hardware.h>
+#include <mach/map.h>
 
-#include <asm/arch/regs-irq.h>
+#include <mach/regs-irq.h>
 
 	.text
 
diff --git a/arch/arm/mach-s3c2440/clock.c b/arch/arm/mach-s3c2440/clock.c
index 184d804934c9..95567e6daea1 100644
--- a/arch/arm/mach-s3c2440/clock.c
+++ b/arch/arm/mach-s3c2440/clock.c
@@ -34,12 +34,12 @@
 #include <linux/mutex.h>
 #include <linux/clk.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/atomic.h>
 #include <asm/irq.h>
 #include <asm/io.h>
 
-#include <asm/arch/regs-clock.h>
+#include <mach/regs-clock.h>
 
 #include <asm/plat-s3c24xx/clock.h>
 #include <asm/plat-s3c24xx/cpu.h>
diff --git a/arch/arm/mach-s3c2440/dma.c b/arch/arm/mach-s3c2440/dma.c
index 0b1260827ac6..cdd4e6e79ac0 100644
--- a/arch/arm/mach-s3c2440/dma.c
+++ b/arch/arm/mach-s3c2440/dma.c
@@ -18,17 +18,17 @@
 #include <linux/serial_core.h>
 
 #include <asm/dma.h>
-#include <asm/arch/dma.h>
+#include <mach/dma.h>
 
 #include <asm/plat-s3c24xx/dma.h>
 #include <asm/plat-s3c24xx/cpu.h>
 
 #include <asm/plat-s3c/regs-serial.h>
-#include <asm/arch/regs-gpio.h>
+#include <mach/regs-gpio.h>
 #include <asm/plat-s3c/regs-ac97.h>
-#include <asm/arch/regs-mem.h>
-#include <asm/arch/regs-lcd.h>
-#include <asm/arch/regs-sdi.h>
+#include <mach/regs-mem.h>
+#include <mach/regs-lcd.h>
+#include <mach/regs-sdi.h>
 #include <asm/plat-s3c24xx/regs-iis.h>
 #include <asm/plat-s3c24xx/regs-spi.h>
 
diff --git a/arch/arm/mach-s3c2440/dsc.c b/arch/arm/mach-s3c2440/dsc.c
index 2995ff5681bb..c0c67438d0a4 100644
--- a/arch/arm/mach-s3c2440/dsc.c
+++ b/arch/arm/mach-s3c2440/dsc.c
@@ -20,12 +20,12 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 #include <asm/irq.h>
 
-#include <asm/arch/regs-gpio.h>
-#include <asm/arch/regs-dsc.h>
+#include <mach/regs-gpio.h>
+#include <mach/regs-dsc.h>
 
 #include <asm/plat-s3c24xx/cpu.h>
 #include <asm/plat-s3c24xx/s3c2440.h>
diff --git a/arch/arm/mach-s3c2440/irq.c b/arch/arm/mach-s3c2440/irq.c
index a87608bc1a03..276b823f4e27 100644
--- a/arch/arm/mach-s3c2440/irq.c
+++ b/arch/arm/mach-s3c2440/irq.c
@@ -25,14 +25,14 @@
 #include <linux/ioport.h>
 #include <linux/sysdev.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/irq.h>
 #include <asm/io.h>
 
 #include <asm/mach/irq.h>
 
-#include <asm/arch/regs-irq.h>
-#include <asm/arch/regs-gpio.h>
+#include <mach/regs-irq.h>
+#include <mach/regs-gpio.h>
 
 #include <asm/plat-s3c24xx/cpu.h>
 #include <asm/plat-s3c24xx/pm.h>
diff --git a/arch/arm/mach-s3c2440/mach-anubis.c b/arch/arm/mach-s3c2440/mach-anubis.c
index 09af8b23500b..441f4bc09472 100644
--- a/arch/arm/mach-s3c2440/mach-anubis.c
+++ b/arch/arm/mach-s3c2440/mach-anubis.c
@@ -27,19 +27,19 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
-#include <asm/arch/anubis-map.h>
-#include <asm/arch/anubis-irq.h>
-#include <asm/arch/anubis-cpld.h>
+#include <mach/anubis-map.h>
+#include <mach/anubis-irq.h>
+#include <mach/anubis-cpld.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 #include <asm/irq.h>
 #include <asm/mach-types.h>
 
 #include <asm/plat-s3c/regs-serial.h>
-#include <asm/arch/regs-gpio.h>
-#include <asm/arch/regs-mem.h>
-#include <asm/arch/regs-lcd.h>
+#include <mach/regs-gpio.h>
+#include <mach/regs-mem.h>
+#include <mach/regs-lcd.h>
 #include <asm/plat-s3c/nand.h>
 
 #include <linux/mtd/mtd.h>
@@ -414,7 +414,7 @@ static struct platform_device *anubis_devices[] __initdata = {
 	&anubis_device_sm501,
 };
 
-static struct clk *anubis_clocks[] = {
+static struct clk *anubis_clocks[] __initdata = {
 	&s3c24xx_dclk0,
 	&s3c24xx_dclk1,
 	&s3c24xx_clkout0,
diff --git a/arch/arm/mach-s3c2440/mach-at2440evb.c b/arch/arm/mach-s3c2440/mach-at2440evb.c
index f5e3c7f27639..f0f0cc6afcf4 100644
--- a/arch/arm/mach-s3c2440/mach-at2440evb.c
+++ b/arch/arm/mach-s3c2440/mach-at2440evb.c
@@ -27,14 +27,14 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/irq.h>
 #include <asm/mach-types.h>
 
 #include <asm/plat-s3c/regs-serial.h>
-#include <asm/arch/regs-gpio.h>
-#include <asm/arch/regs-mem.h>
-#include <asm/arch/regs-lcd.h>
+#include <mach/regs-gpio.h>
+#include <mach/regs-mem.h>
+#include <mach/regs-lcd.h>
 #include <asm/plat-s3c/nand.h>
 
 #include <linux/mtd/mtd.h>
diff --git a/arch/arm/mach-s3c2440/mach-nexcoder.c b/arch/arm/mach-s3c2440/mach-nexcoder.c
index afe0d7b7e389..1a5e7027b41b 100644
--- a/arch/arm/mach-s3c2440/mach-nexcoder.c
+++ b/arch/arm/mach-s3c2440/mach-nexcoder.c
@@ -29,13 +29,13 @@
 #include <asm/mach/irq.h>
 
 #include <asm/setup.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 #include <asm/irq.h>
 #include <asm/mach-types.h>
 
 //#include <asm/debug-ll.h>
-#include <asm/arch/regs-gpio.h>
+#include <mach/regs-gpio.h>
 #include <asm/plat-s3c/regs-serial.h>
 
 #include <asm/plat-s3c24xx/s3c2410.h>
diff --git a/arch/arm/mach-s3c2440/mach-osiris.c b/arch/arm/mach-s3c2440/mach-osiris.c
index af996b0e91e8..8b83f93b6102 100644
--- a/arch/arm/mach-s3c2440/mach-osiris.c
+++ b/arch/arm/mach-s3c2440/mach-osiris.c
@@ -25,18 +25,18 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
-#include <asm/arch/osiris-map.h>
-#include <asm/arch/osiris-cpld.h>
+#include <mach/osiris-map.h>
+#include <mach/osiris-cpld.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 #include <asm/irq.h>
 #include <asm/mach-types.h>
 
 #include <asm/plat-s3c/regs-serial.h>
-#include <asm/arch/regs-gpio.h>
-#include <asm/arch/regs-mem.h>
-#include <asm/arch/regs-lcd.h>
+#include <mach/regs-gpio.h>
+#include <mach/regs-mem.h>
+#include <mach/regs-lcd.h>
 #include <asm/plat-s3c/nand.h>
 
 #include <linux/mtd/mtd.h>
@@ -341,7 +341,7 @@ static struct platform_device *osiris_devices[] __initdata = {
 	&osiris_pcmcia,
 };
 
-static struct clk *osiris_clocks[] = {
+static struct clk *osiris_clocks[] __initdata = {
 	&s3c24xx_dclk0,
 	&s3c24xx_dclk1,
 	&s3c24xx_clkout0,
diff --git a/arch/arm/mach-s3c2440/mach-rx3715.c b/arch/arm/mach-s3c2440/mach-rx3715.c
index bac40c4878a5..e0b07e6a0a18 100644
--- a/arch/arm/mach-s3c2440/mach-rx3715.c
+++ b/arch/arm/mach-s3c2440/mach-rx3715.c
@@ -33,18 +33,18 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 #include <asm/irq.h>
 #include <asm/mach-types.h>
 
 #include <asm/plat-s3c/regs-serial.h>
-#include <asm/arch/regs-gpio.h>
-#include <asm/arch/regs-lcd.h>
+#include <mach/regs-gpio.h>
+#include <mach/regs-lcd.h>
 
-#include <asm/arch/h1940.h>
+#include <mach/h1940.h>
 #include <asm/plat-s3c/nand.h>
-#include <asm/arch/fb.h>
+#include <mach/fb.h>
 
 #include <asm/plat-s3c24xx/clock.h>
 #include <asm/plat-s3c24xx/devs.h>
diff --git a/arch/arm/mach-s3c2440/mach-smdk2440.c b/arch/arm/mach-s3c2440/mach-smdk2440.c
index 4552828bf800..327c8f371984 100644
--- a/arch/arm/mach-s3c2440/mach-smdk2440.c
+++ b/arch/arm/mach-s3c2440/mach-smdk2440.c
@@ -26,17 +26,17 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 #include <asm/irq.h>
 #include <asm/mach-types.h>
 
 #include <asm/plat-s3c/regs-serial.h>
-#include <asm/arch/regs-gpio.h>
-#include <asm/arch/regs-lcd.h>
+#include <mach/regs-gpio.h>
+#include <mach/regs-lcd.h>
 
-#include <asm/arch/idle.h>
-#include <asm/arch/fb.h>
+#include <mach/idle.h>
+#include <mach/fb.h>
 
 #include <asm/plat-s3c24xx/s3c2410.h>
 #include <asm/plat-s3c24xx/s3c2440.h>
diff --git a/arch/arm/mach-s3c2440/s3c2440.c b/arch/arm/mach-s3c2440/s3c2440.c
index 90e1da61fbc3..d6b9a92d284e 100644
--- a/arch/arm/mach-s3c2440/s3c2440.c
+++ b/arch/arm/mach-s3c2440/s3c2440.c
@@ -25,7 +25,7 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 #include <asm/irq.h>
 
diff --git a/arch/arm/mach-s3c2442/clock.c b/arch/arm/mach-s3c2442/clock.c
index 2d030d439fe9..569b5c3d334a 100644
--- a/arch/arm/mach-s3c2442/clock.c
+++ b/arch/arm/mach-s3c2442/clock.c
@@ -34,12 +34,12 @@
 #include <linux/mutex.h>
 #include <linux/clk.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/atomic.h>
 #include <asm/irq.h>
 #include <asm/io.h>
 
-#include <asm/arch/regs-clock.h>
+#include <mach/regs-clock.h>
 
 #include <asm/plat-s3c24xx/clock.h>
 #include <asm/plat-s3c24xx/cpu.h>
diff --git a/arch/arm/mach-s3c2443/clock.c b/arch/arm/mach-s3c2443/clock.c
index 17f064fabdaf..6a8d7cced4a2 100644
--- a/arch/arm/mach-s3c2443/clock.c
+++ b/arch/arm/mach-s3c2443/clock.c
@@ -34,10 +34,10 @@
 
 #include <asm/mach/map.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 
-#include <asm/arch/regs-s3c2443-clock.h>
+#include <mach/regs-s3c2443-clock.h>
 
 #include <asm/plat-s3c24xx/s3c2443.h>
 #include <asm/plat-s3c24xx/clock.h>
diff --git a/arch/arm/mach-s3c2443/dma.c b/arch/arm/mach-s3c2443/dma.c
index f6c006d4297b..c1ff03aebfda 100644
--- a/arch/arm/mach-s3c2443/dma.c
+++ b/arch/arm/mach-s3c2443/dma.c
@@ -18,18 +18,18 @@
 #include <linux/serial_core.h>
 
 #include <asm/dma.h>
-#include <asm/arch/dma.h>
+#include <mach/dma.h>
 #include <asm/io.h>
 
 #include <asm/plat-s3c24xx/dma.h>
 #include <asm/plat-s3c24xx/cpu.h>
 
 #include <asm/plat-s3c/regs-serial.h>
-#include <asm/arch/regs-gpio.h>
+#include <mach/regs-gpio.h>
 #include <asm/plat-s3c/regs-ac97.h>
-#include <asm/arch/regs-mem.h>
-#include <asm/arch/regs-lcd.h>
-#include <asm/arch/regs-sdi.h>
+#include <mach/regs-mem.h>
+#include <mach/regs-lcd.h>
+#include <mach/regs-sdi.h>
 #include <asm/plat-s3c24xx/regs-iis.h>
 #include <asm/plat-s3c24xx/regs-spi.h>
 
diff --git a/arch/arm/mach-s3c2443/irq.c b/arch/arm/mach-s3c2443/irq.c
index f9ad498a6fc0..9674de7223fd 100644
--- a/arch/arm/mach-s3c2443/irq.c
+++ b/arch/arm/mach-s3c2443/irq.c
@@ -25,14 +25,14 @@
 #include <linux/ioport.h>
 #include <linux/sysdev.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/irq.h>
 #include <asm/io.h>
 
 #include <asm/mach/irq.h>
 
-#include <asm/arch/regs-irq.h>
-#include <asm/arch/regs-gpio.h>
+#include <mach/regs-irq.h>
+#include <mach/regs-gpio.h>
 
 #include <asm/plat-s3c24xx/cpu.h>
 #include <asm/plat-s3c24xx/pm.h>
diff --git a/arch/arm/mach-s3c2443/mach-smdk2443.c b/arch/arm/mach-s3c2443/mach-smdk2443.c
index 8cd93130ef36..e3c0d587bd10 100644
--- a/arch/arm/mach-s3c2443/mach-smdk2443.c
+++ b/arch/arm/mach-s3c2443/mach-smdk2443.c
@@ -26,17 +26,17 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 #include <asm/irq.h>
 #include <asm/mach-types.h>
 
 #include <asm/plat-s3c/regs-serial.h>
-#include <asm/arch/regs-gpio.h>
-#include <asm/arch/regs-lcd.h>
+#include <mach/regs-gpio.h>
+#include <mach/regs-lcd.h>
 
-#include <asm/arch/idle.h>
-#include <asm/arch/fb.h>
+#include <mach/idle.h>
+#include <mach/fb.h>
 
 #include <asm/plat-s3c24xx/s3c2410.h>
 #include <asm/plat-s3c24xx/s3c2440.h>
diff --git a/arch/arm/mach-s3c2443/s3c2443.c b/arch/arm/mach-s3c2443/s3c2443.c
index 9ce490560af9..37793f924b5e 100644
--- a/arch/arm/mach-s3c2443/s3c2443.c
+++ b/arch/arm/mach-s3c2443/s3c2443.c
@@ -25,12 +25,12 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 #include <asm/irq.h>
 
-#include <asm/arch/regs-s3c2443-clock.h>
-#include <asm/arch/reset.h>
+#include <mach/regs-s3c2443-clock.h>
+#include <mach/reset.h>
 
 #include <asm/plat-s3c24xx/s3c2443.h>
 #include <asm/plat-s3c24xx/devs.h>
diff --git a/arch/arm/mach-sa1100/Makefile b/arch/arm/mach-sa1100/Makefile
index 8e0244631d65..8a5546e6d547 100644
--- a/arch/arm/mach-sa1100/Makefile
+++ b/arch/arm/mach-sa1100/Makefile
@@ -46,9 +46,6 @@ led-$(CONFIG_SA1100_SIMPAD)		+= leds-simpad.o
 # LEDs support
 obj-$(CONFIG_LEDS) += $(led-y)
 
-# SA1110 USB client support
-#obj-$(CONFIG_SA1100_USB)		+= usb/
-
 # Miscelaneous functions
 obj-$(CONFIG_PM)			+= pm.o sleep.o
 obj-$(CONFIG_SA1100_SSP)		+= ssp.o
diff --git a/arch/arm/mach-sa1100/assabet.c b/arch/arm/mach-sa1100/assabet.c
index be06d668a3c9..55e64477a876 100644
--- a/arch/arm/mach-sa1100/assabet.c
+++ b/arch/arm/mach-sa1100/assabet.c
@@ -20,7 +20,7 @@
 #include <linux/delay.h>
 #include <linux/mm.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/irq.h>
 #include <asm/setup.h>
@@ -34,8 +34,8 @@
 #include <asm/mach/irda.h>
 #include <asm/mach/map.h>
 #include <asm/mach/serial_sa1100.h>
-#include <asm/arch/assabet.h>
-#include <asm/arch/mcp.h>
+#include <mach/assabet.h>
+#include <mach/mcp.h>
 
 #include "generic.h"
 
diff --git a/arch/arm/mach-sa1100/badge4.c b/arch/arm/mach-sa1100/badge4.c
index 842d9e6dc5ff..3efefbdd2527 100644
--- a/arch/arm/mach-sa1100/badge4.c
+++ b/arch/arm/mach-sa1100/badge4.c
@@ -23,10 +23,10 @@
 #include <linux/mtd/partitions.h>
 #include <linux/errno.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/setup.h>
-#include <asm/arch/irqs.h>
+#include <mach/irqs.h>
 
 #include <asm/mach/arch.h>
 #include <asm/mach/flash.h>
@@ -34,7 +34,7 @@
 #include <asm/hardware/sa1111.h>
 #include <asm/mach/serial_sa1100.h>
 
-#include <asm/arch/badge4.h>
+#include <mach/badge4.h>
 
 #include "generic.h"
 
diff --git a/arch/arm/mach-sa1100/cerf.c b/arch/arm/mach-sa1100/cerf.c
index 31afe50d7cd5..fd3ad9cfc912 100644
--- a/arch/arm/mach-sa1100/cerf.c
+++ b/arch/arm/mach-sa1100/cerf.c
@@ -19,7 +19,7 @@
 #include <linux/mtd/partitions.h>
 
 #include <asm/irq.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/setup.h>
 
 #include <asm/mach-types.h>
@@ -28,8 +28,8 @@
 #include <asm/mach/map.h>
 #include <asm/mach/serial_sa1100.h>
 
-#include <asm/arch/cerf.h>
-#include <asm/arch/mcp.h>
+#include <mach/cerf.h>
+#include <mach/mcp.h>
 #include "generic.h"
 
 static struct resource cerfuart2_resources[] = {
@@ -96,7 +96,7 @@ static struct resource cerf_flash_resource = {
 static void __init cerf_init_irq(void)
 {
 	sa1100_init_irq();
-	set_irq_type(CERF_ETH_IRQ, IRQT_RISING);
+	set_irq_type(CERF_ETH_IRQ, IRQ_TYPE_EDGE_RISING);
 }
 
 static struct map_desc cerf_io_desc[] __initdata = {
diff --git a/arch/arm/mach-sa1100/clock.c b/arch/arm/mach-sa1100/clock.c
index b5809c51d13f..43c30f84abf2 100644
--- a/arch/arm/mach-sa1100/clock.c
+++ b/arch/arm/mach-sa1100/clock.c
@@ -11,7 +11,7 @@
 #include <linux/spinlock.h>
 #include <linux/mutex.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 
 /*
  * Very simple clock implementation - we only have one clock to
diff --git a/arch/arm/mach-sa1100/collie.c b/arch/arm/mach-sa1100/collie.c
index 2f772a3965c4..fe289997cfaf 100644
--- a/arch/arm/mach-sa1100/collie.c
+++ b/arch/arm/mach-sa1100/collie.c
@@ -26,11 +26,11 @@
 #include <linux/mtd/partitions.h>
 #include <linux/timer.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/irq.h>
 #include <asm/setup.h>
-#include <asm/arch/collie.h>
+#include <mach/collie.h>
 
 #include <asm/mach/arch.h>
 #include <asm/mach/flash.h>
@@ -40,7 +40,7 @@
 #include <asm/hardware/scoop.h>
 #include <asm/mach/sharpsl_param.h>
 #include <asm/hardware/locomo.h>
-#include <asm/arch/mcp.h>
+#include <mach/mcp.h>
 
 #include "generic.h"
 
diff --git a/arch/arm/mach-sa1100/collie_pm.c b/arch/arm/mach-sa1100/collie_pm.c
index 94620be7bfac..b1161fc80602 100644
--- a/arch/arm/mach-sa1100/collie_pm.c
+++ b/arch/arm/mach-sa1100/collie_pm.c
@@ -24,11 +24,10 @@
 #include <linux/platform_device.h>
 
 #include <asm/irq.h>
-#include <asm/mach-types.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/hardware/scoop.h>
 #include <asm/dma.h>
-#include <asm/arch/collie.h>
+#include <mach/collie.h>
 #include <asm/mach/sharpsl_param.h>
 #include <asm/hardware/sharpsl_pm.h>
 
diff --git a/arch/arm/mach-sa1100/cpu-sa1100.c b/arch/arm/mach-sa1100/cpu-sa1100.c
index 343368aa82de..da3a898a6d66 100644
--- a/arch/arm/mach-sa1100/cpu-sa1100.c
+++ b/arch/arm/mach-sa1100/cpu-sa1100.c
@@ -88,7 +88,7 @@
 #include <linux/init.h>
 #include <linux/cpufreq.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 
 #include "generic.h"
 
diff --git a/arch/arm/mach-sa1100/cpu-sa1110.c b/arch/arm/mach-sa1100/cpu-sa1110.c
index 36b47ff5af11..029dbfbbafcf 100644
--- a/arch/arm/mach-sa1100/cpu-sa1110.c
+++ b/arch/arm/mach-sa1100/cpu-sa1110.c
@@ -3,8 +3,6 @@
  *
  *  Copyright (C) 2001 Russell King
  *
- *  $Id: cpu-sa1110.c,v 1.9 2002/07/06 16:53:18 rmk Exp $
- *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
@@ -26,7 +24,7 @@
 #include <linux/delay.h>
 #include <linux/init.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/io.h>
 #include <asm/system.h>
diff --git a/arch/arm/mach-sa1100/dma.c b/arch/arm/mach-sa1100/dma.c
index e5080286060e..f990a3e85846 100644
--- a/arch/arm/mach-sa1100/dma.c
+++ b/arch/arm/mach-sa1100/dma.c
@@ -18,7 +18,7 @@
 
 #include <asm/system.h>
 #include <asm/irq.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/dma.h>
 
 
@@ -76,7 +76,7 @@ static irqreturn_t dma_irq_handler(int irq, void *dev_id)
  * 	address of the hardware registers for that channel as the channel
  * 	identifier. This identifier is written to the location pointed by
  * 	@dma_regs. The list of possible values for @device are listed into
- * 	linux/include/asm-arm/arch-sa1100/dma.h as a dma_device_t enum.
+ * 	arch/arm/mach-sa1100/include/mach/dma.h as a dma_device_t enum.
  *
  * 	Note that reading from a port and writing to the same port are
  * 	actually considered as two different streams requiring separate
diff --git a/arch/arm/mach-sa1100/generic.c b/arch/arm/mach-sa1100/generic.c
index 0c2fa1c4fb4c..1362994c78aa 100644
--- a/arch/arm/mach-sa1100/generic.c
+++ b/arch/arm/mach-sa1100/generic.c
@@ -21,7 +21,7 @@
 
 #include <asm/div64.h>
 #include <asm/cnt32_to_63.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/system.h>
 #include <asm/pgtable.h>
 #include <asm/mach/map.h>
@@ -31,6 +31,9 @@
 
 #include "generic.h"
 
+unsigned int reset_status;
+EXPORT_SYMBOL(reset_status);
+
 #define NR_FREQS	16
 
 /*
diff --git a/arch/arm/mach-sa1100/gpio.c b/arch/arm/mach-sa1100/gpio.c
index 372f1f4f54a1..0d3829a8c2c1 100644
--- a/arch/arm/mach-sa1100/gpio.c
+++ b/arch/arm/mach-sa1100/gpio.c
@@ -12,7 +12,7 @@
 #include <linux/module.h>
 
 #include <asm/gpio.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include "generic.h"
 
 static int sa1100_gpio_get(struct gpio_chip *chip, unsigned offset)
diff --git a/arch/arm/mach-sa1100/h3600.c b/arch/arm/mach-sa1100/h3600.c
index 8473c37b77d6..af25a78d705d 100644
--- a/arch/arm/mach-sa1100/h3600.c
+++ b/arch/arm/mach-sa1100/h3600.c
@@ -30,7 +30,7 @@
 #include <linux/serial_core.h>
 
 #include <asm/irq.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/setup.h>
 
@@ -41,14 +41,14 @@
 #include <asm/mach/map.h>
 #include <asm/mach/serial_sa1100.h>
 
-#include <asm/arch/h3600.h>
+#include <mach/h3600.h>
 
 #if defined (CONFIG_SA1100_H3600) || defined (CONFIG_SA1100_H3100)
-#include <asm/arch/h3600_gpio.h>
+#include <mach/h3600_gpio.h>
 #endif
 
 #ifdef CONFIG_SA1100_H3800
-#include <asm/arch/h3600_asic.h>
+#include <mach/h3600_asic.h>
 #endif
 
 #include "generic.h"
@@ -681,7 +681,7 @@ static struct ipaq_model_ops h3800_model_ops __initdata = {
 
 #define MAX_ASIC_ISR_LOOPS    20
 
-/* The order of these is important - see #include <asm/arch/irqs.h> */
+/* The order of these is important - see #include <mach/irqs.h> */
 static u32 kpio_irq_mask[] = {
 	KPIO_KEY_ALL,
 	KPIO_SPI_INT,
@@ -834,7 +834,7 @@ static void __init h3800_init_irq(void)
 		set_irq_chip(irq, &h3800_gpio_irqchip);
 	}
 #endif
-	set_irq_type(IRQ_GPIO_H3800_ASIC, IRQT_RISING);
+	set_irq_type(IRQ_GPIO_H3800_ASIC, IRQ_TYPE_EDGE_RISING);
 	set_irq_chained_handler(IRQ_GPIO_H3800_ASIC, h3800_IRQ_demux);
 }
 
diff --git a/arch/arm/mach-sa1100/hackkit.c b/arch/arm/mach-sa1100/hackkit.c
index 046b213efd5b..e7056c0b562c 100644
--- a/arch/arm/mach-sa1100/hackkit.c
+++ b/arch/arm/mach-sa1100/hackkit.c
@@ -22,7 +22,7 @@
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/partitions.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/setup.h>
 #include <asm/page.h>
diff --git a/include/asm-arm/arch-sa1100/SA-1100.h b/arch/arm/mach-sa1100/include/mach/SA-1100.h
index 62aaf04a3906..62aaf04a3906 100644
--- a/include/asm-arm/arch-sa1100/SA-1100.h
+++ b/arch/arm/mach-sa1100/include/mach/SA-1100.h
diff --git a/include/asm-arm/arch-sa1100/SA-1101.h b/arch/arm/mach-sa1100/include/mach/SA-1101.h
index 65ca8c79e6d2..5d2ad7db991c 100644
--- a/include/asm-arm/arch-sa1100/SA-1101.h
+++ b/arch/arm/mach-sa1100/include/mach/SA-1101.h
@@ -38,7 +38,7 @@
 #define SA1101_p2v(PhAdd)  (PhAdd)
 #endif
 
-#include <asm/arch/bitfield.h>
+#include <mach/bitfield.h>
 
 #define C               0
 #define Assembly        1
diff --git a/include/asm-arm/arch-sa1100/SA-1111.h b/arch/arm/mach-sa1100/include/mach/SA-1111.h
index c38f60915cb6..c38f60915cb6 100644
--- a/include/asm-arm/arch-sa1100/SA-1111.h
+++ b/arch/arm/mach-sa1100/include/mach/SA-1111.h
diff --git a/include/asm-arm/arch-sa1100/assabet.h b/arch/arm/mach-sa1100/include/mach/assabet.h
index d6a1bb5b4944..3959b20d5d1c 100644
--- a/include/asm-arm/arch-sa1100/assabet.h
+++ b/arch/arm/mach-sa1100/include/mach/assabet.h
@@ -1,5 +1,5 @@
 /*
- * linux/include/asm-arm/arch-sa1100/assabet.h
+ * arch/arm/mach-sa1100/include/mach/assabet.h
  *
  * Created 2000/06/05 by Nicolas Pitre <nico@cam.org>
  *
diff --git a/include/asm-arm/arch-sa1100/badge4.h b/arch/arm/mach-sa1100/include/mach/badge4.h
index 8d7a671492db..44d2e1bfc04b 100644
--- a/include/asm-arm/arch-sa1100/badge4.h
+++ b/arch/arm/mach-sa1100/include/mach/badge4.h
@@ -1,5 +1,5 @@
 /*
- * linux/include/asm-arm/arch-sa1100/badge4.h
+ * arch/arm/mach-sa1100/include/mach/badge4.h
  *
  *   Tim Connors <connors@hpl.hp.com>
  *   Christopher Hoover <ch@hpl.hp.com>
@@ -13,7 +13,7 @@
  */
 
 #ifndef __ASM_ARCH_HARDWARE_H
-#error "include <asm/hardware.h> instead"
+#error "include <mach/hardware.h> instead"
 #endif
 
 #define BADGE4_SA1111_BASE		(0x48000000)
diff --git a/include/asm-arm/arch-sa1100/bitfield.h b/arch/arm/mach-sa1100/include/mach/bitfield.h
index f1f0e3387d9c..f1f0e3387d9c 100644
--- a/include/asm-arm/arch-sa1100/bitfield.h
+++ b/arch/arm/mach-sa1100/include/mach/bitfield.h
diff --git a/include/asm-arm/arch-sa1100/cerf.h b/arch/arm/mach-sa1100/include/mach/cerf.h
index 9a19c3d07c1e..c3ac3d0f9465 100644
--- a/include/asm-arm/arch-sa1100/cerf.h
+++ b/arch/arm/mach-sa1100/include/mach/cerf.h
@@ -1,5 +1,5 @@
 /*
- * include/asm-arm/arch-sa1100/cerf.h
+ * arch/arm/mach-sa1100/include/mach/cerf.h
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
diff --git a/include/asm-arm/arch-sa1100/collie.h b/arch/arm/mach-sa1100/include/mach/collie.h
index 762eba535813..69e962416e3f 100644
--- a/include/asm-arm/arch-sa1100/collie.h
+++ b/arch/arm/mach-sa1100/include/mach/collie.h
@@ -1,5 +1,5 @@
 /*
- * linux/include/asm-arm/arch-sa1100/collie.h
+ * arch/arm/mach-sa1100/include/mach/collie.h
  *
  * This file contains the hardware specific definitions for Assabet
  * Only include this file from SA1100-specific files.
diff --git a/arch/arm/mach-sa1100/include/mach/debug-macro.S b/arch/arm/mach-sa1100/include/mach/debug-macro.S
new file mode 100644
index 000000000000..1f0634d92702
--- /dev/null
+++ b/arch/arm/mach-sa1100/include/mach/debug-macro.S
@@ -0,0 +1,58 @@
+/* arch/arm/mach-sa1100/include/mach/debug-macro.S
+ *
+ * Debugging macro include header
+ *
+ *  Copyright (C) 1994-1999 Russell King
+ *  Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+*/
+#include <mach/hardware.h>
+
+		.macro	addruart,rx
+		mrc	p15, 0, \rx, c1, c0
+		tst	\rx, #1			@ MMU enabled?
+		moveq	\rx, #0x80000000	@ physical base address
+		movne	\rx, #0xf8000000	@ virtual address
+
+		@ We probe for the active serial port here, coherently with
+		@ the comment in arch/arm/mach-sa1100/include/mach/uncompress.h.
+		@ We assume r1 can be clobbered.
+
+		@ see if Ser3 is active
+		add	\rx, \rx, #0x00050000
+		ldr	r1, [\rx, #UTCR3]
+		tst	r1, #UTCR3_TXE
+
+		@ if Ser3 is inactive, then try Ser1
+		addeq	\rx, \rx, #(0x00010000 - 0x00050000)
+		ldreq	r1, [\rx, #UTCR3]
+		tsteq	r1, #UTCR3_TXE
+
+		@ if Ser1 is inactive, then try Ser2
+		addeq	\rx, \rx, #(0x00030000 - 0x00010000)
+		ldreq	r1, [\rx, #UTCR3]
+		tsteq	r1, #UTCR3_TXE
+
+		@ if all ports are inactive, then there is nothing we can do
+		moveq	pc, lr
+		.endm
+
+		.macro	senduart,rd,rx
+		str	\rd, [\rx, #UTDR]
+		.endm
+
+		.macro	waituart,rd,rx
+1001:		ldr	\rd, [\rx, #UTSR1]
+		tst	\rd, #UTSR1_TNF
+		beq	1001b
+		.endm
+
+		.macro	busyuart,rd,rx
+1001:		ldr	\rd, [\rx, #UTSR1]
+		tst	\rd, #UTSR1_TBY
+		bne	1001b
+		.endm
diff --git a/arch/arm/mach-sa1100/include/mach/dma.h b/arch/arm/mach-sa1100/include/mach/dma.h
new file mode 100644
index 000000000000..dda1b351310d
--- /dev/null
+++ b/arch/arm/mach-sa1100/include/mach/dma.h
@@ -0,0 +1,117 @@
+/*
+ * arch/arm/mach-sa1100/include/mach/dma.h
+ *
+ * Generic SA1100 DMA support
+ *
+ * Copyright (C) 2000 Nicolas Pitre
+ *
+ */
+
+#ifndef __ASM_ARCH_DMA_H
+#define __ASM_ARCH_DMA_H
+
+#include "hardware.h"
+
+
+/*
+ * The SA1100 has six internal DMA channels.
+ */
+#define SA1100_DMA_CHANNELS	6
+
+/*
+ * Maximum physical DMA buffer size
+ */
+#define MAX_DMA_SIZE		0x1fff
+#define CUT_DMA_SIZE		0x1000
+
+/*
+ * All possible SA1100 devices a DMA channel can be attached to.
+ */
+typedef enum {
+	DMA_Ser0UDCWr  = DDAR_Ser0UDCWr,   /* Ser. port 0 UDC Write */
+	DMA_Ser0UDCRd  = DDAR_Ser0UDCRd,   /* Ser. port 0 UDC Read */
+	DMA_Ser1UARTWr = DDAR_Ser1UARTWr,  /* Ser. port 1 UART Write */
+	DMA_Ser1UARTRd = DDAR_Ser1UARTRd,  /* Ser. port 1 UART Read */
+	DMA_Ser1SDLCWr = DDAR_Ser1SDLCWr,  /* Ser. port 1 SDLC Write */
+	DMA_Ser1SDLCRd = DDAR_Ser1SDLCRd,  /* Ser. port 1 SDLC Read */
+	DMA_Ser2UARTWr = DDAR_Ser2UARTWr,  /* Ser. port 2 UART Write */
+	DMA_Ser2UARTRd = DDAR_Ser2UARTRd,  /* Ser. port 2 UART Read */
+	DMA_Ser2HSSPWr = DDAR_Ser2HSSPWr,  /* Ser. port 2 HSSP Write */
+	DMA_Ser2HSSPRd = DDAR_Ser2HSSPRd,  /* Ser. port 2 HSSP Read */
+	DMA_Ser3UARTWr = DDAR_Ser3UARTWr,  /* Ser. port 3 UART Write */
+	DMA_Ser3UARTRd = DDAR_Ser3UARTRd,  /* Ser. port 3 UART Read */
+	DMA_Ser4MCP0Wr = DDAR_Ser4MCP0Wr,  /* Ser. port 4 MCP 0 Write (audio) */
+	DMA_Ser4MCP0Rd = DDAR_Ser4MCP0Rd,  /* Ser. port 4 MCP 0 Read (audio) */
+	DMA_Ser4MCP1Wr = DDAR_Ser4MCP1Wr,  /* Ser. port 4 MCP 1 Write */
+	DMA_Ser4MCP1Rd = DDAR_Ser4MCP1Rd,  /* Ser. port 4 MCP 1 Read */
+	DMA_Ser4SSPWr  = DDAR_Ser4SSPWr,   /* Ser. port 4 SSP Write (16 bits) */
+	DMA_Ser4SSPRd  = DDAR_Ser4SSPRd    /* Ser. port 4 SSP Read (16 bits) */
+} dma_device_t;
+
+typedef struct {
+	volatile u_long DDAR;
+	volatile u_long SetDCSR;
+	volatile u_long ClrDCSR;
+	volatile u_long RdDCSR;
+	volatile dma_addr_t DBSA;
+	volatile u_long DBTA;
+	volatile dma_addr_t DBSB;
+	volatile u_long DBTB;
+} dma_regs_t;
+
+typedef void (*dma_callback_t)(void *data);
+
+/*
+ * DMA function prototypes
+ */
+
+extern int sa1100_request_dma( dma_device_t device, const char *device_id,
+			       dma_callback_t callback, void *data,
+			       dma_regs_t **regs );
+extern void sa1100_free_dma( dma_regs_t *regs );
+extern int sa1100_start_dma( dma_regs_t *regs, dma_addr_t dma_ptr, u_int size );
+extern dma_addr_t sa1100_get_dma_pos(dma_regs_t *regs);
+extern void sa1100_reset_dma(dma_regs_t *regs);
+
+/**
+ * 	sa1100_stop_dma - stop DMA in progress
+ * 	@regs: identifier for the channel to use
+ *
+ * 	This stops DMA without clearing buffer pointers. Unlike
+ * 	sa1100_clear_dma() this allows subsequent use of sa1100_resume_dma()
+ * 	or sa1100_get_dma_pos().
+ *
+ * 	The @regs identifier is provided by a successful call to
+ * 	sa1100_request_dma().
+ **/
+
+#define sa1100_stop_dma(regs)	((regs)->ClrDCSR = DCSR_IE|DCSR_RUN)
+
+/**
+ * 	sa1100_resume_dma - resume DMA on a stopped channel
+ * 	@regs: identifier for the channel to use
+ *
+ * 	This resumes DMA on a channel previously stopped with
+ * 	sa1100_stop_dma().
+ *
+ * 	The @regs identifier is provided by a successful call to
+ * 	sa1100_request_dma().
+ **/
+
+#define sa1100_resume_dma(regs)	((regs)->SetDCSR = DCSR_IE|DCSR_RUN)
+
+/**
+ * 	sa1100_clear_dma - clear DMA pointers
+ * 	@regs: identifier for the channel to use
+ *
+ * 	This clear any DMA state so the DMA engine is ready to restart
+ * 	with new buffers through sa1100_start_dma(). Any buffers in flight
+ * 	are discarded.
+ *
+ * 	The @regs identifier is provided by a successful call to
+ * 	sa1100_request_dma().
+ **/
+
+#define sa1100_clear_dma(regs)	((regs)->ClrDCSR = DCSR_IE|DCSR_RUN|DCSR_STRTA|DCSR_STRTB)
+
+#endif /* _ASM_ARCH_DMA_H */
diff --git a/arch/arm/mach-sa1100/include/mach/entry-macro.S b/arch/arm/mach-sa1100/include/mach/entry-macro.S
new file mode 100644
index 000000000000..6aa13c46c5d3
--- /dev/null
+++ b/arch/arm/mach-sa1100/include/mach/entry-macro.S
@@ -0,0 +1,47 @@
+/*
+ * arch/arm/mach-sa1100/include/mach/entry-macro.S
+ *
+ * Low-level IRQ helper macros for SA1100-based platforms
+ *
+ * This file is licensed under  the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+ 		.macro	disable_fiq
+		.endm
+
+		.macro  get_irqnr_preamble, base, tmp
+		mov	\base, #0xfa000000		@ ICIP = 0xfa050000
+		add	\base, \base, #0x00050000
+		.endm
+
+		.macro  arch_ret_to_user, tmp1, tmp2
+		.endm
+
+		.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
+		ldr	\irqstat, [\base]		@ get irqs
+		ldr	\irqnr, [\base, #4]		@ ICMR = 0xfa050004
+		ands	\irqstat, \irqstat, \irqnr
+		mov	\irqnr, #0
+		beq	1001f
+		tst	\irqstat, #0xff
+		moveq	\irqstat, \irqstat, lsr #8
+		addeq	\irqnr, \irqnr, #8
+		tsteq	\irqstat, #0xff
+		moveq	\irqstat, \irqstat, lsr #8
+		addeq	\irqnr, \irqnr, #8
+		tsteq	\irqstat, #0xff
+		moveq	\irqstat, \irqstat, lsr #8
+		addeq	\irqnr, \irqnr, #8
+		tst	\irqstat, #0x0f
+		moveq	\irqstat, \irqstat, lsr #4
+		addeq	\irqnr, \irqnr, #4
+		tst	\irqstat, #0x03
+		moveq	\irqstat, \irqstat, lsr #2
+		addeq	\irqnr, \irqnr, #2
+		tst	\irqstat, #0x01
+		addeqs	\irqnr, \irqnr, #1
+1001:
+		.endm
+
diff --git a/arch/arm/mach-sa1100/include/mach/gpio.h b/arch/arm/mach-sa1100/include/mach/gpio.h
new file mode 100644
index 000000000000..582a0c92da53
--- /dev/null
+++ b/arch/arm/mach-sa1100/include/mach/gpio.h
@@ -0,0 +1,68 @@
+/*
+ * arch/arm/mach-sa1100/include/mach/gpio.h
+ *
+ * SA1100 GPIO wrappers for arch-neutral GPIO calls
+ *
+ * Written by Philipp Zabel <philipp.zabel@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ */
+
+#ifndef __ASM_ARCH_SA1100_GPIO_H
+#define __ASM_ARCH_SA1100_GPIO_H
+
+#include <mach/hardware.h>
+#include <asm/irq.h>
+#include <asm-generic/gpio.h>
+
+static inline int gpio_get_value(unsigned gpio)
+{
+	if (__builtin_constant_p(gpio) && (gpio <= GPIO_MAX))
+		return GPLR & GPIO_GPIO(gpio);
+	else
+		return __gpio_get_value(gpio);
+}
+
+static inline void gpio_set_value(unsigned gpio, int value)
+{
+	if (__builtin_constant_p(gpio) && (gpio <= GPIO_MAX))
+		if (value)
+			GPSR = GPIO_GPIO(gpio);
+		else
+			GPCR = GPIO_GPIO(gpio);
+	else
+		__gpio_set_value(gpio, value);
+}
+
+#define gpio_cansleep	__gpio_cansleep
+
+static inline unsigned gpio_to_irq(unsigned gpio)
+{
+	if (gpio < 11)
+		return IRQ_GPIO0 + gpio;
+	else
+		return IRQ_GPIO11 - 11 + gpio;
+}
+
+static inline unsigned irq_to_gpio(unsigned irq)
+{
+	if (irq < IRQ_GPIO11_27)
+		return irq - IRQ_GPIO0;
+	else
+		return irq - IRQ_GPIO11 + 11;
+}
+
+#endif
diff --git a/include/asm-arm/arch-sa1100/h3600.h b/arch/arm/mach-sa1100/include/mach/h3600.h
index 3ca0ecf095e6..3ca0ecf095e6 100644
--- a/include/asm-arm/arch-sa1100/h3600.h
+++ b/arch/arm/mach-sa1100/include/mach/h3600.h
diff --git a/include/asm-arm/arch-sa1100/h3600_gpio.h b/arch/arm/mach-sa1100/include/mach/h3600_gpio.h
index 62b0b7879685..62b0b7879685 100644
--- a/include/asm-arm/arch-sa1100/h3600_gpio.h
+++ b/arch/arm/mach-sa1100/include/mach/h3600_gpio.h
diff --git a/arch/arm/mach-sa1100/include/mach/hardware.h b/arch/arm/mach-sa1100/include/mach/hardware.h
new file mode 100644
index 000000000000..5976435f42c2
--- /dev/null
+++ b/arch/arm/mach-sa1100/include/mach/hardware.h
@@ -0,0 +1,57 @@
+/*
+ * arch/arm/mach-sa1100/include/mach/hardware.h
+ *
+ * Copyright (C) 1998 Nicolas Pitre <nico@cam.org>
+ *
+ * This file contains the hardware definitions for SA1100 architecture
+ *
+ * 2000/05/23 John Dorsey <john+@cs.cmu.edu>
+ *      Definitions for SA1111 added.
+ */
+
+#ifndef __ASM_ARCH_HARDWARE_H
+#define __ASM_ARCH_HARDWARE_H
+
+
+#define UNCACHEABLE_ADDR	0xfa050000
+
+
+/*
+ * SA1100 internal I/O mappings
+ *
+ * We have the following mapping:
+ *      phys            virt
+ *      80000000        f8000000
+ *      90000000        fa000000
+ *      a0000000        fc000000
+ *      b0000000        fe000000
+ */
+
+#define VIO_BASE        0xf8000000	/* virtual start of IO space */
+#define VIO_SHIFT       3		/* x = IO space shrink power */
+#define PIO_START       0x80000000	/* physical start of IO space */
+
+#define io_p2v( x )             \
+   ( (((x)&0x00ffffff) | (((x)&0x30000000)>>VIO_SHIFT)) + VIO_BASE )
+#define io_v2p( x )             \
+   ( (((x)&0x00ffffff) | (((x)&(0x30000000>>VIO_SHIFT))<<VIO_SHIFT)) + PIO_START )
+
+#ifndef __ASSEMBLY__
+
+# define __REG(x)	(*((volatile unsigned long *)io_p2v(x)))
+# define __PREG(x)	(io_v2p((unsigned long)&(x)))
+
+#else
+
+# define __REG(x)	io_p2v(x)
+# define __PREG(x)	io_v2p(x)
+
+#endif
+
+#include "SA-1100.h"
+
+#ifdef CONFIG_SA1101
+#include "SA-1101.h"
+#endif
+
+#endif  /* _ASM_ARCH_HARDWARE_H */
diff --git a/arch/arm/mach-sa1100/include/mach/ide.h b/arch/arm/mach-sa1100/include/mach/ide.h
new file mode 100644
index 000000000000..4c99c8f5e617
--- /dev/null
+++ b/arch/arm/mach-sa1100/include/mach/ide.h
@@ -0,0 +1,75 @@
+/*
+ * arch/arm/mach-sa1100/include/mach/ide.h
+ *
+ * Copyright (c) 1998 Hugo Fiennes & Nicolas Pitre
+ *
+ * 18-aug-2000: Cleanup by Erik Mouw (J.A.K.Mouw@its.tudelft.nl)
+ *              Get rid of the special ide_init_hwif_ports() functions
+ *              and make a generalised function that can be used by all
+ *              architectures.
+ */
+
+#include <asm/irq.h>
+#include <mach/hardware.h>
+#include <asm/mach-types.h>
+
+#error "This code is broken and needs update to match with current ide support"
+
+
+/*
+ * Set up a hw structure for a specified data port, control port and IRQ.
+ * This should follow whatever the default interface uses.
+ */
+static inline void ide_init_hwif_ports(hw_regs_t *hw, unsigned long data_port,
+				       unsigned long ctrl_port, int *irq)
+{
+	unsigned long reg = data_port;
+	int i;
+	int regincr = 1;
+
+	/* The Empeg board has the first two address lines unused */
+	if (machine_is_empeg())
+		regincr = 1 << 2;
+
+	/* The LART doesn't use A0 for IDE */
+	if (machine_is_lart())
+		regincr = 1 << 1;
+
+	memset(hw, 0, sizeof(*hw));
+
+	for (i = 0; i <= 7; i++) {
+		hw->io_ports_array[i] = reg;
+		reg += regincr;
+	}
+
+	hw->io_ports.ctl_addr = ctrl_port;
+
+	if (irq)
+		*irq = 0;
+}
+
+/*
+ * This registers the standard ports for this architecture with the IDE
+ * driver.
+ */
+static __inline__ void
+ide_init_default_hwifs(void)
+{
+    if (machine_is_lart()) {
+#ifdef CONFIG_SA1100_LART
+        hw_regs_t hw;
+
+        /* Enable GPIO as interrupt line */
+        GPDR &= ~LART_GPIO_IDE;
+	set_irq_type(LART_IRQ_IDE, IRQ_TYPE_EDGE_RISING);
+
+        /* set PCMCIA interface timing */
+        MECR = 0x00060006;
+
+        /* init the interface */
+	ide_init_hwif_ports(&hw, PCMCIA_IO_0_BASE + 0x0000, PCMCIA_IO_0_BASE + 0x1000, NULL);
+        hw.irq = LART_IRQ_IDE;
+        ide_register_hw(&hw);
+#endif
+    }
+}
diff --git a/arch/arm/mach-sa1100/include/mach/io.h b/arch/arm/mach-sa1100/include/mach/io.h
new file mode 100644
index 000000000000..0c070a6149bc
--- /dev/null
+++ b/arch/arm/mach-sa1100/include/mach/io.h
@@ -0,0 +1,26 @@
+/*
+ * arch/arm/mach-sa1100/include/mach/io.h
+ *
+ * Copyright (C) 1997-1999 Russell King
+ *
+ * Modifications:
+ *  06-12-1997	RMK	Created.
+ *  07-04-1999	RMK	Major cleanup
+ */
+#ifndef __ASM_ARM_ARCH_IO_H
+#define __ASM_ARM_ARCH_IO_H
+
+#define IO_SPACE_LIMIT 0xffffffff
+
+/*
+ * We don't actually have real ISA nor PCI buses, but there is so many 
+ * drivers out there that might just work if we fake them...
+ */
+static inline void __iomem *__io(unsigned long addr)
+{
+	return (void __iomem *)addr;
+}
+#define __io(a)			__io(a)
+#define __mem_pci(a)		(a)
+
+#endif
diff --git a/arch/arm/mach-sa1100/include/mach/irqs.h b/arch/arm/mach-sa1100/include/mach/irqs.h
new file mode 100644
index 000000000000..0cb36609b3ac
--- /dev/null
+++ b/arch/arm/mach-sa1100/include/mach/irqs.h
@@ -0,0 +1,197 @@
+/*
+ * arch/arm/mach-sa1100/include/mach/irqs.h
+ *
+ * Copyright (C) 1996 Russell King
+ * Copyright (C) 1998 Deborah Wallach (updates for SA1100/Brutus).
+ * Copyright (C) 1999 Nicolas Pitre (full GPIO irq isolation)
+ *
+ * 2001/11/14	RMK	Cleaned up and standardised a lot of the IRQs.
+ */
+
+#define	IRQ_GPIO0		0
+#define	IRQ_GPIO1		1
+#define	IRQ_GPIO2		2
+#define	IRQ_GPIO3		3
+#define	IRQ_GPIO4		4
+#define	IRQ_GPIO5		5
+#define	IRQ_GPIO6		6
+#define	IRQ_GPIO7		7
+#define	IRQ_GPIO8		8
+#define	IRQ_GPIO9		9
+#define	IRQ_GPIO10		10
+#define	IRQ_GPIO11_27		11
+#define	IRQ_LCD  		12	/* LCD controller           */
+#define	IRQ_Ser0UDC		13	/* Ser. port 0 UDC          */
+#define	IRQ_Ser1SDLC		14	/* Ser. port 1 SDLC         */
+#define	IRQ_Ser1UART		15	/* Ser. port 1 UART         */
+#define	IRQ_Ser2ICP		16	/* Ser. port 2 ICP          */
+#define	IRQ_Ser3UART		17	/* Ser. port 3 UART         */
+#define	IRQ_Ser4MCP		18	/* Ser. port 4 MCP          */
+#define	IRQ_Ser4SSP		19	/* Ser. port 4 SSP          */
+#define	IRQ_DMA0 		20	/* DMA controller channel 0 */
+#define	IRQ_DMA1 		21	/* DMA controller channel 1 */
+#define	IRQ_DMA2 		22	/* DMA controller channel 2 */
+#define	IRQ_DMA3 		23	/* DMA controller channel 3 */
+#define	IRQ_DMA4 		24	/* DMA controller channel 4 */
+#define	IRQ_DMA5 		25	/* DMA controller channel 5 */
+#define	IRQ_OST0 		26	/* OS Timer match 0         */
+#define	IRQ_OST1 		27	/* OS Timer match 1         */
+#define	IRQ_OST2 		28	/* OS Timer match 2         */
+#define	IRQ_OST3 		29	/* OS Timer match 3         */
+#define	IRQ_RTC1Hz		30	/* RTC 1 Hz clock           */
+#define	IRQ_RTCAlrm		31	/* RTC Alarm                */
+
+#define	IRQ_GPIO11		32
+#define	IRQ_GPIO12		33
+#define	IRQ_GPIO13		34
+#define	IRQ_GPIO14		35
+#define	IRQ_GPIO15		36
+#define	IRQ_GPIO16		37
+#define	IRQ_GPIO17		38
+#define	IRQ_GPIO18		39
+#define	IRQ_GPIO19		40
+#define	IRQ_GPIO20		41
+#define	IRQ_GPIO21		42
+#define	IRQ_GPIO22		43
+#define	IRQ_GPIO23		44
+#define	IRQ_GPIO24		45
+#define	IRQ_GPIO25		46
+#define	IRQ_GPIO26		47
+#define	IRQ_GPIO27		48
+
+/*
+ * The next 16 interrupts are for board specific purposes.  Since
+ * the kernel can only run on one machine at a time, we can re-use
+ * these.  If you need more, increase IRQ_BOARD_END, but keep it
+ * within sensible limits.  IRQs 49 to 64 are available.
+ */
+#define IRQ_BOARD_START		49
+#define IRQ_BOARD_END		65
+
+#define IRQ_SA1111_START	(IRQ_BOARD_END)
+#define IRQ_GPAIN0		(IRQ_BOARD_END + 0)
+#define IRQ_GPAIN1		(IRQ_BOARD_END + 1)
+#define IRQ_GPAIN2		(IRQ_BOARD_END + 2)
+#define IRQ_GPAIN3		(IRQ_BOARD_END + 3)
+#define IRQ_GPBIN0		(IRQ_BOARD_END + 4)
+#define IRQ_GPBIN1		(IRQ_BOARD_END + 5)
+#define IRQ_GPBIN2		(IRQ_BOARD_END + 6)
+#define IRQ_GPBIN3		(IRQ_BOARD_END + 7)
+#define IRQ_GPBIN4		(IRQ_BOARD_END + 8)
+#define IRQ_GPBIN5		(IRQ_BOARD_END + 9)
+#define IRQ_GPCIN0		(IRQ_BOARD_END + 10)
+#define IRQ_GPCIN1		(IRQ_BOARD_END + 11)
+#define IRQ_GPCIN2		(IRQ_BOARD_END + 12)
+#define IRQ_GPCIN3		(IRQ_BOARD_END + 13)
+#define IRQ_GPCIN4		(IRQ_BOARD_END + 14)
+#define IRQ_GPCIN5		(IRQ_BOARD_END + 15)
+#define IRQ_GPCIN6		(IRQ_BOARD_END + 16)
+#define IRQ_GPCIN7		(IRQ_BOARD_END + 17)
+#define IRQ_MSTXINT		(IRQ_BOARD_END + 18)
+#define IRQ_MSRXINT		(IRQ_BOARD_END + 19)
+#define IRQ_MSSTOPERRINT	(IRQ_BOARD_END + 20)
+#define IRQ_TPTXINT		(IRQ_BOARD_END + 21)
+#define IRQ_TPRXINT		(IRQ_BOARD_END + 22)
+#define IRQ_TPSTOPERRINT	(IRQ_BOARD_END + 23)
+#define SSPXMTINT		(IRQ_BOARD_END + 24)
+#define SSPRCVINT		(IRQ_BOARD_END + 25)
+#define SSPROR			(IRQ_BOARD_END + 26)
+#define AUDXMTDMADONEA		(IRQ_BOARD_END + 32)
+#define AUDRCVDMADONEA		(IRQ_BOARD_END + 33)
+#define AUDXMTDMADONEB		(IRQ_BOARD_END + 34)
+#define AUDRCVDMADONEB		(IRQ_BOARD_END + 35)
+#define AUDTFSR			(IRQ_BOARD_END + 36)
+#define AUDRFSR			(IRQ_BOARD_END + 37)
+#define AUDTUR			(IRQ_BOARD_END + 38)
+#define AUDROR			(IRQ_BOARD_END + 39)
+#define AUDDTS			(IRQ_BOARD_END + 40)
+#define AUDRDD			(IRQ_BOARD_END + 41)
+#define AUDSTO			(IRQ_BOARD_END + 42)
+#define IRQ_USBPWR		(IRQ_BOARD_END + 43)
+#define IRQ_HCIM		(IRQ_BOARD_END + 44)
+#define IRQ_HCIBUFFACC		(IRQ_BOARD_END + 45)
+#define IRQ_HCIRMTWKP		(IRQ_BOARD_END + 46)
+#define IRQ_NHCIMFCIR		(IRQ_BOARD_END + 47)
+#define IRQ_USB_PORT_RESUME	(IRQ_BOARD_END + 48)
+#define IRQ_S0_READY_NINT	(IRQ_BOARD_END + 49)
+#define IRQ_S1_READY_NINT	(IRQ_BOARD_END + 50)
+#define IRQ_S0_CD_VALID		(IRQ_BOARD_END + 51)
+#define IRQ_S1_CD_VALID		(IRQ_BOARD_END + 52)
+#define IRQ_S0_BVD1_STSCHG	(IRQ_BOARD_END + 53)
+#define IRQ_S1_BVD1_STSCHG	(IRQ_BOARD_END + 54)
+
+#define IRQ_LOCOMO_START	(IRQ_BOARD_END)
+#define IRQ_LOCOMO_KEY		(IRQ_BOARD_END + 0)
+#define IRQ_LOCOMO_GPIO0	(IRQ_BOARD_END + 1)
+#define IRQ_LOCOMO_GPIO1	(IRQ_BOARD_END + 2)
+#define IRQ_LOCOMO_GPIO2	(IRQ_BOARD_END + 3)
+#define IRQ_LOCOMO_GPIO3	(IRQ_BOARD_END + 4)
+#define IRQ_LOCOMO_GPIO4	(IRQ_BOARD_END + 5)
+#define IRQ_LOCOMO_GPIO5	(IRQ_BOARD_END + 6)
+#define IRQ_LOCOMO_GPIO6	(IRQ_BOARD_END + 7)
+#define IRQ_LOCOMO_GPIO7	(IRQ_BOARD_END + 8)
+#define IRQ_LOCOMO_GPIO8	(IRQ_BOARD_END + 9)
+#define IRQ_LOCOMO_GPIO9	(IRQ_BOARD_END + 10)
+#define IRQ_LOCOMO_GPIO10	(IRQ_BOARD_END + 11)
+#define IRQ_LOCOMO_GPIO11	(IRQ_BOARD_END + 12)
+#define IRQ_LOCOMO_GPIO12	(IRQ_BOARD_END + 13)
+#define IRQ_LOCOMO_GPIO13	(IRQ_BOARD_END + 14)
+#define IRQ_LOCOMO_GPIO14	(IRQ_BOARD_END + 15)
+#define IRQ_LOCOMO_GPIO15	(IRQ_BOARD_END + 16)
+#define IRQ_LOCOMO_LT		(IRQ_BOARD_END + 17)
+#define IRQ_LOCOMO_SPI_RFR	(IRQ_BOARD_END + 18)
+#define IRQ_LOCOMO_SPI_RFW	(IRQ_BOARD_END + 19)
+#define IRQ_LOCOMO_SPI_REND	(IRQ_BOARD_END + 20)
+#define IRQ_LOCOMO_SPI_TEND	(IRQ_BOARD_END + 21)
+
+/*
+ * Figure out the MAX IRQ number.
+ *
+ * If we have an SA1111, the max IRQ is S1_BVD1_STSCHG+1.
+ * If we have an LoCoMo, the max IRQ is IRQ_LOCOMO_SPI_TEND+1
+ * Otherwise, we have the standard IRQs only.
+ */
+#ifdef CONFIG_SA1111
+#define NR_IRQS			(IRQ_S1_BVD1_STSCHG + 1)
+#elif defined(CONFIG_SA1100_H3800)
+#define NR_IRQS			(IRQ_BOARD_END)
+#elif defined(CONFIG_SHARP_LOCOMO)
+#define NR_IRQS			(IRQ_LOCOMO_SPI_TEND + 1)
+#else
+#define NR_IRQS			(IRQ_BOARD_START)
+#endif
+
+/*
+ * Board specific IRQs.  Define them here.
+ * Do not surround them with ifdefs.
+ */
+#define IRQ_NEPONSET_SMC9196	(IRQ_BOARD_START + 0)
+#define IRQ_NEPONSET_USAR	(IRQ_BOARD_START + 1)
+#define IRQ_NEPONSET_SA1111	(IRQ_BOARD_START + 2)
+
+/* LoCoMo Interrupts (CONFIG_SHARP_LOCOMO) */
+#define IRQ_LOCOMO_KEY_BASE	(IRQ_BOARD_START + 0)
+#define IRQ_LOCOMO_GPIO_BASE	(IRQ_BOARD_START + 1)
+#define IRQ_LOCOMO_LT_BASE	(IRQ_BOARD_START + 2)
+#define IRQ_LOCOMO_SPI_BASE	(IRQ_BOARD_START + 3)
+
+/* H3800-specific IRQs (CONFIG_SA1100_H3800) */
+#define H3800_KPIO_IRQ_START    (IRQ_BOARD_START)
+#define IRQ_H3800_KEY           (IRQ_BOARD_START + 0)
+#define IRQ_H3800_SPI           (IRQ_BOARD_START + 1)
+#define IRQ_H3800_OWM           (IRQ_BOARD_START + 2)
+#define IRQ_H3800_ADC           (IRQ_BOARD_START + 3)
+#define IRQ_H3800_UART_0        (IRQ_BOARD_START + 4)
+#define IRQ_H3800_UART_1        (IRQ_BOARD_START + 5)
+#define IRQ_H3800_TIMER_0       (IRQ_BOARD_START + 6)
+#define IRQ_H3800_TIMER_1       (IRQ_BOARD_START + 7)
+#define IRQ_H3800_TIMER_2       (IRQ_BOARD_START + 8)
+#define H3800_KPIO_IRQ_COUNT    9
+
+#define H3800_GPIO_IRQ_START    (IRQ_BOARD_START + 9)
+#define IRQ_H3800_PEN           (IRQ_BOARD_START + 9)
+#define IRQ_H3800_SD_DETECT     (IRQ_BOARD_START + 10)
+#define IRQ_H3800_EAR_IN        (IRQ_BOARD_START + 11)
+#define IRQ_H3800_USB_DETECT    (IRQ_BOARD_START + 12)
+#define IRQ_H3800_SD_CON_SLT    (IRQ_BOARD_START + 13)
+#define H3800_GPIO_IRQ_COUNT    5
diff --git a/include/asm-arm/arch-sa1100/jornada720.h b/arch/arm/mach-sa1100/include/mach/jornada720.h
index 45d2bb59f9d0..bc120850d313 100644
--- a/include/asm-arm/arch-sa1100/jornada720.h
+++ b/arch/arm/mach-sa1100/include/mach/jornada720.h
@@ -1,5 +1,5 @@
 /*
- * include/asm-arm/arch-sa1100/jornada720.h
+ * arch/arm/mach-sa1100/include/mach/jornada720.h
  *
  * This file contains SSP/MCU communication definitions for HP Jornada 710/720/728
  *
diff --git a/include/asm-arm/arch-sa1100/lart.h b/arch/arm/mach-sa1100/include/mach/lart.h
index 8a5482d908db..8a5482d908db 100644
--- a/include/asm-arm/arch-sa1100/lart.h
+++ b/arch/arm/mach-sa1100/include/mach/lart.h
diff --git a/include/asm-arm/arch-sa1100/mcp.h b/arch/arm/mach-sa1100/include/mach/mcp.h
index f58a22755c61..fb8b09a57ad7 100644
--- a/include/asm-arm/arch-sa1100/mcp.h
+++ b/arch/arm/mach-sa1100/include/mach/mcp.h
@@ -1,5 +1,5 @@
 /*
- *  linux/include/asm-arm/arch-sa1100/mcp.h
+ *  arch/arm/mach-sa1100/include/mach/mcp.h
  *
  *  Copyright (C) 2005 Russell King.
  *
diff --git a/arch/arm/mach-sa1100/include/mach/memory.h b/arch/arm/mach-sa1100/include/mach/memory.h
new file mode 100644
index 000000000000..29f639e2afc6
--- /dev/null
+++ b/arch/arm/mach-sa1100/include/mach/memory.h
@@ -0,0 +1,68 @@
+/*
+ * arch/arm/mach-sa1100/include/mach/memory.h
+ *
+ * Copyright (C) 1999-2000 Nicolas Pitre <nico@cam.org>
+ */
+
+#ifndef __ASM_ARCH_MEMORY_H
+#define __ASM_ARCH_MEMORY_H
+
+#include <asm/sizes.h>
+
+/*
+ * Physical DRAM offset is 0xc0000000 on the SA1100
+ */
+#define PHYS_OFFSET	UL(0xc0000000)
+
+#ifndef __ASSEMBLY__
+
+#ifdef CONFIG_SA1111
+void sa1111_adjust_zones(int node, unsigned long *size, unsigned long *holes);
+
+#define arch_adjust_zones(node, size, holes) \
+	sa1111_adjust_zones(node, size, holes)
+
+#define ISA_DMA_THRESHOLD	(PHYS_OFFSET + SZ_1M - 1)
+
+#endif
+#endif
+
+/*
+ * Virtual view <-> DMA view memory address translations
+ * virt_to_bus: Used to translate the virtual address to an
+ *		address suitable to be passed to set_dma_addr
+ * bus_to_virt: Used to convert an address for DMA operations
+ *		to an address that the kernel can use.
+ *
+ * On the SA1100, bus addresses are equivalent to physical addresses.
+ */
+#define __virt_to_bus(x)	 __virt_to_phys(x)
+#define __bus_to_virt(x)	 __phys_to_virt(x)
+
+/*
+ * Because of the wide memory address space between physical RAM banks on the 
+ * SA1100, it's much convenient to use Linux's NUMA support to implement our 
+ * memory map representation.  Assuming all memory nodes have equal access 
+ * characteristics, we then have generic discontiguous memory support.
+ *
+ * Of course, all this isn't mandatory for SA1100 implementations with only
+ * one used memory bank.  For those, simply undefine CONFIG_DISCONTIGMEM.
+ *
+ * The nodes are matched with the physical memory bank addresses which are 
+ * incidentally the same as virtual addresses.
+ * 
+ * 	node 0:  0xc0000000 - 0xc7ffffff
+ * 	node 1:  0xc8000000 - 0xcfffffff
+ * 	node 2:  0xd0000000 - 0xd7ffffff
+ * 	node 3:  0xd8000000 - 0xdfffffff
+ */
+#define NODE_MEM_SIZE_BITS	27
+
+/*
+ * Cache flushing area - SA1100 zero bank
+ */
+#define FLUSH_BASE_PHYS		0xe0000000
+#define FLUSH_BASE		0xf5000000
+#define FLUSH_BASE_MINICACHE	0xf5100000
+
+#endif
diff --git a/arch/arm/mach-sa1100/include/mach/mtd-xip.h b/arch/arm/mach-sa1100/include/mach/mtd-xip.h
new file mode 100644
index 000000000000..eaa09e86ad16
--- /dev/null
+++ b/arch/arm/mach-sa1100/include/mach/mtd-xip.h
@@ -0,0 +1,24 @@
+/*
+ * MTD primitives for XIP support. Architecture specific functions
+ *
+ * Do not include this file directly. It's included from linux/mtd/xip.h
+ * 
+ * Author:	Nicolas Pitre
+ * Created:	Nov 2, 2004
+ * Copyright:	(C) 2004 MontaVista Software, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ARCH_SA1100_MTD_XIP_H__
+#define __ARCH_SA1100_MTD_XIP_H__
+
+#define xip_irqpending()	(ICIP & ICMR)
+
+/* we sample OSCR and convert desired delta to usec (1/4 ~= 1000000/3686400) */
+#define xip_currtime()		(OSCR)
+#define xip_elapsed_since(x)	(signed)((OSCR - (x)) / 4)
+
+#endif /* __ARCH_SA1100_MTD_XIP_H__ */
diff --git a/include/asm-arm/arch-sa1100/neponset.h b/arch/arm/mach-sa1100/include/mach/neponset.h
index 09ec9e2bd182..d3f044f92c00 100644
--- a/include/asm-arm/arch-sa1100/neponset.h
+++ b/arch/arm/mach-sa1100/include/mach/neponset.h
@@ -1,5 +1,5 @@
 /*
- * linux/include/asm-arm/arch-sa1100/neponset.h
+ * arch/arm/mach-sa1100/include/mach/neponset.h
  *
  * Created 2000/06/05 by Nicolas Pitre <nico@cam.org>
  *
diff --git a/arch/arm/mach-sa1100/include/mach/reset.h b/arch/arm/mach-sa1100/include/mach/reset.h
new file mode 100644
index 000000000000..f61957e6842a
--- /dev/null
+++ b/arch/arm/mach-sa1100/include/mach/reset.h
@@ -0,0 +1,18 @@
+#ifndef __ASM_ARCH_RESET_H
+#define __ASM_ARCH_RESET_H
+
+#include "hardware.h"
+
+#define RESET_STATUS_HARDWARE	(1 << 0)	/* Hardware Reset */
+#define RESET_STATUS_WATCHDOG	(1 << 1)	/* Watchdog Reset */
+#define RESET_STATUS_LOWPOWER	(1 << 2)	/* Exit from Low Power/Sleep */
+#define RESET_STATUS_GPIO	(1 << 3)	/* GPIO Reset */
+#define RESET_STATUS_ALL	(0xf)
+
+extern unsigned int reset_status;
+static inline void clear_reset_status(unsigned int mask)
+{
+	RCSR = mask;
+}
+
+#endif /* __ASM_ARCH_RESET_H */
diff --git a/include/asm-arm/arch-sa1100/shannon.h b/arch/arm/mach-sa1100/include/mach/shannon.h
index ec27d6e12140..ec27d6e12140 100644
--- a/include/asm-arm/arch-sa1100/shannon.h
+++ b/arch/arm/mach-sa1100/include/mach/shannon.h
diff --git a/include/asm-arm/arch-sa1100/simpad.h b/arch/arm/mach-sa1100/include/mach/simpad.h
index 034301d23f60..9296c4513ce1 100644
--- a/include/asm-arm/arch-sa1100/simpad.h
+++ b/arch/arm/mach-sa1100/include/mach/simpad.h
@@ -1,5 +1,5 @@
 /*
- * linux/include/asm-arm/arch-sa1100/simpad.h
+ * arch/arm/mach-sa1100/include/mach/simpad.h
  *
  * based of assabet.h same as HUW_Webpanel
  *
diff --git a/arch/arm/mach-sa1100/include/mach/system.h b/arch/arm/mach-sa1100/include/mach/system.h
new file mode 100644
index 000000000000..63755ca5b1b4
--- /dev/null
+++ b/arch/arm/mach-sa1100/include/mach/system.h
@@ -0,0 +1,22 @@
+/*
+ * arch/arm/mach-sa1100/include/mach/system.h
+ *
+ * Copyright (c) 1999 Nicolas Pitre <nico@cam.org>
+ */
+#include <mach/hardware.h>
+
+static inline void arch_idle(void)
+{
+	cpu_do_idle();
+}
+
+static inline void arch_reset(char mode)
+{
+	if (mode == 's') {
+		/* Jump into ROM at address 0 */
+		cpu_reset(0);
+	} else {
+		/* Use on-chip reset capability */
+		RSRR = RSRR_SWR;
+	}
+}
diff --git a/arch/arm/mach-sa1100/include/mach/timex.h b/arch/arm/mach-sa1100/include/mach/timex.h
new file mode 100644
index 000000000000..7a5d017b58b3
--- /dev/null
+++ b/arch/arm/mach-sa1100/include/mach/timex.h
@@ -0,0 +1,12 @@
+/*
+ * arch/arm/mach-sa1100/include/mach/timex.h
+ *
+ * SA1100 architecture timex specifications
+ *
+ * Copyright (C) 1998 
+ */
+
+/*
+ * SA1100 timer
+ */
+#define CLOCK_TICK_RATE		3686400
diff --git a/arch/arm/mach-sa1100/include/mach/uncompress.h b/arch/arm/mach-sa1100/include/mach/uncompress.h
new file mode 100644
index 000000000000..714160b03d7a
--- /dev/null
+++ b/arch/arm/mach-sa1100/include/mach/uncompress.h
@@ -0,0 +1,50 @@
+/*
+ * arch/arm/mach-sa1100/include/mach/uncompress.h
+ *
+ * (C) 1999 Nicolas Pitre <nico@cam.org>
+ *
+ * Reorganised to be machine independent.
+ */
+
+#include "hardware.h"
+
+/*
+ * The following code assumes the serial port has already been
+ * initialized by the bootloader.  We search for the first enabled
+ * port in the most probable order.  If you didn't setup a port in
+ * your bootloader then nothing will appear (which might be desired).
+ */
+
+#define UART(x)		(*(volatile unsigned long *)(serial_port + (x)))
+
+static void putc(int c)
+{
+	unsigned long serial_port;
+
+	do {
+		serial_port = _Ser3UTCR0;
+		if (UART(UTCR3) & UTCR3_TXE) break;
+		serial_port = _Ser1UTCR0;
+		if (UART(UTCR3) & UTCR3_TXE) break;
+		serial_port = _Ser2UTCR0;
+		if (UART(UTCR3) & UTCR3_TXE) break;
+		return;
+	} while (0);
+
+	/* wait for space in the UART's transmitter */
+	while (!(UART(UTSR1) & UTSR1_TNF))
+		barrier();
+
+	/* send the character out. */
+	UART(UTDR) = c;
+}
+
+static inline void flush(void)
+{
+}
+
+/*
+ * Nothing to do for these
+ */
+#define arch_decomp_setup()
+#define arch_decomp_wdog()
diff --git a/arch/arm/mach-sa1100/include/mach/vmalloc.h b/arch/arm/mach-sa1100/include/mach/vmalloc.h
new file mode 100644
index 000000000000..ec8fdc5a3606
--- /dev/null
+++ b/arch/arm/mach-sa1100/include/mach/vmalloc.h
@@ -0,0 +1,4 @@
+/*
+ * arch/arm/mach-sa1100/include/mach/vmalloc.h
+ */
+#define VMALLOC_END       (0xe8000000)
diff --git a/arch/arm/mach-sa1100/irq.c b/arch/arm/mach-sa1100/irq.c
index fa0403af7eec..86369a8f0cea 100644
--- a/arch/arm/mach-sa1100/irq.c
+++ b/arch/arm/mach-sa1100/irq.c
@@ -16,7 +16,7 @@
 #include <linux/ioport.h>
 #include <linux/sysdev.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/mach/irq.h>
 
 #include "generic.h"
@@ -46,17 +46,17 @@ static int sa1100_gpio_type(unsigned int irq, unsigned int type)
 	else
 		mask = GPIO11_27_MASK(irq);
 
-	if (type == IRQT_PROBE) {
+	if (type == IRQ_TYPE_PROBE) {
 		if ((GPIO_IRQ_rising_edge | GPIO_IRQ_falling_edge) & mask)
 			return 0;
-		type = __IRQT_RISEDGE | __IRQT_FALEDGE;
+		type = IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING;
 	}
 
-	if (type & __IRQT_RISEDGE) {
+	if (type & IRQ_TYPE_EDGE_RISING) {
 		GPIO_IRQ_rising_edge |= mask;
 	} else
 		GPIO_IRQ_rising_edge &= ~mask;
-	if (type & __IRQT_FALEDGE) {
+	if (type & IRQ_TYPE_EDGE_FALLING) {
 		GPIO_IRQ_falling_edge |= mask;
 	} else
 		GPIO_IRQ_falling_edge &= ~mask;
diff --git a/arch/arm/mach-sa1100/jornada720.c b/arch/arm/mach-sa1100/jornada720.c
index 52ac37d1e23a..81848aa96424 100644
--- a/arch/arm/mach-sa1100/jornada720.c
+++ b/arch/arm/mach-sa1100/jornada720.c
@@ -23,7 +23,7 @@
 #include <linux/mtd/partitions.h>
 #include <video/s1d13xxxfb.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/hardware/sa1111.h>
 #include <asm/irq.h>
 #include <asm/mach-types.h>
diff --git a/arch/arm/mach-sa1100/jornada720_ssp.c b/arch/arm/mach-sa1100/jornada720_ssp.c
index 395c39bed7d8..06ea7abd9170 100644
--- a/arch/arm/mach-sa1100/jornada720_ssp.c
+++ b/arch/arm/mach-sa1100/jornada720_ssp.c
@@ -20,9 +20,9 @@
 #include <linux/sched.h>
 #include <linux/slab.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/hardware/ssp.h>
-#include <asm/arch/jornada720.h>
+#include <mach/jornada720.h>
 
 static DEFINE_SPINLOCK(jornada_ssp_lock);
 static unsigned long jornada_ssp_flags;
diff --git a/arch/arm/mach-sa1100/lart.c b/arch/arm/mach-sa1100/lart.c
index 07d3a696ae7f..0cd52692d2f7 100644
--- a/arch/arm/mach-sa1100/lart.c
+++ b/arch/arm/mach-sa1100/lart.c
@@ -6,14 +6,14 @@
 #include <linux/kernel.h>
 #include <linux/tty.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/setup.h>
 #include <asm/mach-types.h>
 
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 #include <asm/mach/serial_sa1100.h>
-#include <asm/arch/mcp.h>
+#include <mach/mcp.h>
 
 #include "generic.h"
 
diff --git a/arch/arm/mach-sa1100/leds-assabet.c b/arch/arm/mach-sa1100/leds-assabet.c
index ee9788989875..64e9b4b11b54 100644
--- a/arch/arm/mach-sa1100/leds-assabet.c
+++ b/arch/arm/mach-sa1100/leds-assabet.c
@@ -11,10 +11,10 @@
  */
 #include <linux/init.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/leds.h>
 #include <asm/system.h>
-#include <asm/arch/assabet.h>
+#include <mach/assabet.h>
 
 #include "leds.h"
 
diff --git a/arch/arm/mach-sa1100/leds-badge4.c b/arch/arm/mach-sa1100/leds-badge4.c
index 280929be972d..cf1e38458b81 100644
--- a/arch/arm/mach-sa1100/leds-badge4.c
+++ b/arch/arm/mach-sa1100/leds-badge4.c
@@ -12,7 +12,7 @@
 
 #include <linux/init.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/leds.h>
 #include <asm/system.h>
 
diff --git a/arch/arm/mach-sa1100/leds-cerf.c b/arch/arm/mach-sa1100/leds-cerf.c
index f38eeddbef10..259b48e0be89 100644
--- a/arch/arm/mach-sa1100/leds-cerf.c
+++ b/arch/arm/mach-sa1100/leds-cerf.c
@@ -5,7 +5,7 @@
  */
 #include <linux/init.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/leds.h>
 #include <asm/system.h>
 
diff --git a/arch/arm/mach-sa1100/leds-hackkit.c b/arch/arm/mach-sa1100/leds-hackkit.c
index 7e91cc90b5ae..2bce137462e4 100644
--- a/arch/arm/mach-sa1100/leds-hackkit.c
+++ b/arch/arm/mach-sa1100/leds-hackkit.c
@@ -11,7 +11,7 @@
  */
 #include <linux/init.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/leds.h>
 #include <asm/system.h>
 
diff --git a/arch/arm/mach-sa1100/leds-lart.c b/arch/arm/mach-sa1100/leds-lart.c
index 2d27d76cfc6b..0505a1fdcdb2 100644
--- a/arch/arm/mach-sa1100/leds-lart.c
+++ b/arch/arm/mach-sa1100/leds-lart.c
@@ -11,7 +11,7 @@
  */
 #include <linux/init.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/leds.h>
 #include <asm/system.h>
 
diff --git a/arch/arm/mach-sa1100/leds-simpad.c b/arch/arm/mach-sa1100/leds-simpad.c
index def090a87385..d50f4eeaa12e 100644
--- a/arch/arm/mach-sa1100/leds-simpad.c
+++ b/arch/arm/mach-sa1100/leds-simpad.c
@@ -5,10 +5,10 @@
  */
 #include <linux/init.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/leds.h>
 #include <asm/system.h>
-#include <asm/arch/simpad.h>
+#include <mach/simpad.h>
 
 #include "leds.h"
 
diff --git a/arch/arm/mach-sa1100/neponset.c b/arch/arm/mach-sa1100/neponset.c
index 9f1ed1509301..4856a6bd2482 100644
--- a/arch/arm/mach-sa1100/neponset.c
+++ b/arch/arm/mach-sa1100/neponset.c
@@ -10,14 +10,14 @@
 #include <linux/platform_device.h>
 #include <linux/slab.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/irq.h>
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 #include <asm/mach/serial_sa1100.h>
-#include <asm/arch/assabet.h>
-#include <asm/arch/neponset.h>
+#include <mach/assabet.h>
+#include <mach/neponset.h>
 #include <asm/hardware/sa1111.h>
 #include <asm/sizes.h>
 
@@ -151,7 +151,7 @@ static int __devinit neponset_probe(struct platform_device *dev)
 	/*
 	 * Install handler for GPIO25.
 	 */
-	set_irq_type(IRQ_GPIO25, IRQT_RISING);
+	set_irq_type(IRQ_GPIO25, IRQ_TYPE_EDGE_RISING);
 	set_irq_chained_handler(IRQ_GPIO25, neponset_irq_handler);
 
 	/*
diff --git a/arch/arm/mach-sa1100/pleb.c b/arch/arm/mach-sa1100/pleb.c
index c7bf7e0038f0..83be1c6c5f80 100644
--- a/arch/arm/mach-sa1100/pleb.c
+++ b/arch/arm/mach-sa1100/pleb.c
@@ -11,7 +11,7 @@
 
 #include <linux/mtd/partitions.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 #include <asm/setup.h>
 #include <asm/mach-types.h>
@@ -20,7 +20,7 @@
 #include <asm/mach/map.h>
 #include <asm/mach/flash.h>
 #include <asm/mach/serial_sa1100.h>
-#include <asm/arch/irqs.h>
+#include <mach/irqs.h>
 
 #include "generic.h"
 
@@ -143,7 +143,7 @@ static void __init pleb_map_io(void)
 
 	GPDR &= ~GPIO_ETH0_IRQ;
 
-	set_irq_type(GPIO_ETH0_IRQ, IRQT_FALLING);
+	set_irq_type(GPIO_ETH0_IRQ, IRQ_TYPE_EDGE_FALLING);
 }
 
 MACHINE_START(PLEB, "PLEB")
diff --git a/arch/arm/mach-sa1100/pm.c b/arch/arm/mach-sa1100/pm.c
index 1693d447a224..111cce67ad2f 100644
--- a/arch/arm/mach-sa1100/pm.c
+++ b/arch/arm/mach-sa1100/pm.c
@@ -27,7 +27,7 @@
 #include <linux/errno.h>
 #include <linux/time.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/memory.h>
 #include <asm/system.h>
 #include <asm/mach/time.h>
diff --git a/arch/arm/mach-sa1100/shannon.c b/arch/arm/mach-sa1100/shannon.c
index 8acab7b1e4c2..9ccdd09cf69f 100644
--- a/arch/arm/mach-sa1100/shannon.c
+++ b/arch/arm/mach-sa1100/shannon.c
@@ -9,7 +9,7 @@
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/partitions.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/setup.h>
 
@@ -17,8 +17,8 @@
 #include <asm/mach/flash.h>
 #include <asm/mach/map.h>
 #include <asm/mach/serial_sa1100.h>
-#include <asm/arch/mcp.h>
-#include <asm/arch/shannon.h>
+#include <mach/mcp.h>
+#include <mach/shannon.h>
 
 #include "generic.h"
 
diff --git a/arch/arm/mach-sa1100/simpad.c b/arch/arm/mach-sa1100/simpad.c
index a9ae1b581aa6..8dd635317959 100644
--- a/arch/arm/mach-sa1100/simpad.c
+++ b/arch/arm/mach-sa1100/simpad.c
@@ -14,7 +14,7 @@
 #include <linux/mtd/partitions.h>
 
 #include <asm/irq.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/setup.h>
 
 #include <asm/mach-types.h>
@@ -22,8 +22,8 @@
 #include <asm/mach/flash.h>
 #include <asm/mach/map.h>
 #include <asm/mach/serial_sa1100.h>
-#include <asm/arch/mcp.h>
-#include <asm/arch/simpad.h>
+#include <mach/mcp.h>
+#include <mach/simpad.h>
 
 #include <linux/serial_core.h>
 #include <linux/ioport.h>
diff --git a/arch/arm/mach-sa1100/sleep.S b/arch/arm/mach-sa1100/sleep.S
index 5a84062f92af..171441f96710 100644
--- a/arch/arm/mach-sa1100/sleep.S
+++ b/arch/arm/mach-sa1100/sleep.S
@@ -18,7 +18,7 @@
 
 #include <linux/linkage.h>
 #include <asm/assembler.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 
 
 
diff --git a/arch/arm/mach-sa1100/ssp.c b/arch/arm/mach-sa1100/ssp.c
index 06206ceb312e..641f361c56f4 100644
--- a/arch/arm/mach-sa1100/ssp.c
+++ b/arch/arm/mach-sa1100/ssp.c
@@ -20,7 +20,7 @@
 
 #include <asm/io.h>
 #include <asm/irq.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/hardware/ssp.h>
 
 #define TIMEOUT 100000
diff --git a/arch/arm/mach-sa1100/time.c b/arch/arm/mach-sa1100/time.c
index a9799cb35b74..24c0a4bae850 100644
--- a/arch/arm/mach-sa1100/time.c
+++ b/arch/arm/mach-sa1100/time.c
@@ -16,7 +16,7 @@
 #include <linux/clockchips.h>
 
 #include <asm/mach/time.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 
 #define MIN_OSCR_DELTA 2
 
diff --git a/arch/arm/mach-shark/include/mach/debug-macro.S b/arch/arm/mach-shark/include/mach/debug-macro.S
new file mode 100644
index 000000000000..0836cb78b29a
--- /dev/null
+++ b/arch/arm/mach-shark/include/mach/debug-macro.S
@@ -0,0 +1,31 @@
+/* arch/arm/mach-shark/include/mach/debug-macro.S
+ *
+ * Debugging macro include header
+ *
+ *  Copyright (C) 1994-1999 Russell King
+ *  Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+*/
+
+		.macro	addruart,rx
+		mov	\rx, #0xe0000000
+		orr	\rx, \rx, #0x000003f8
+		.endm
+
+		.macro	senduart,rd,rx
+		strb	\rd, [\rx]
+		.endm
+
+		.macro	busyuart,rd,rx
+		mov	\rd, #0
+1001:		add	\rd, \rd, #1
+		teq	\rd, #0x10000
+		bne	1001b
+		.endm
+
+		.macro	waituart,rd,rx
+		.endm
diff --git a/arch/arm/mach-shark/include/mach/dma.h b/arch/arm/mach-shark/include/mach/dma.h
new file mode 100644
index 000000000000..c0a29bd2a74f
--- /dev/null
+++ b/arch/arm/mach-shark/include/mach/dma.h
@@ -0,0 +1,18 @@
+/*
+ * arch/arm/mach-shark/include/mach/dma.h
+ *
+ * by Alexander Schulz
+ */
+#ifndef __ASM_ARCH_DMA_H
+#define __ASM_ARCH_DMA_H
+
+/* Use only the lowest 4MB, nothing else works.
+ * The rest is not DMAable. See dev /  .properties
+ * in OpenFirmware.
+ */
+#define MAX_DMA_ADDRESS		0xC0400000
+#define MAX_DMA_CHANNELS	8
+#define DMA_ISA_CASCADE         4
+
+#endif /* _ASM_ARCH_DMA_H */
+
diff --git a/arch/arm/mach-shark/include/mach/entry-macro.S b/arch/arm/mach-shark/include/mach/entry-macro.S
new file mode 100644
index 000000000000..e2853c0a3333
--- /dev/null
+++ b/arch/arm/mach-shark/include/mach/entry-macro.S
@@ -0,0 +1,41 @@
+/*
+ * arch/arm/mach-shark/include/mach/entry-macro.S
+ *
+ * Low-level IRQ helper macros for Shark platform
+ *
+ * This file is licensed under  the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+		.macro	disable_fiq
+		.endm
+
+		.macro  get_irqnr_preamble, base, tmp
+		.endm
+
+		.macro  arch_ret_to_user, tmp1, tmp2
+		.endm
+
+		.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
+		mov	r4, #0xe0000000
+
+		mov	\irqstat, #0x0C
+		strb	\irqstat, [r4, #0x20]		@outb(0x0C, 0x20) /* Poll command */
+		ldrb	\irqnr, [r4, #0x20]		@irq = inb(0x20) & 7
+		and	\irqstat, \irqnr, #0x80
+		teq	\irqstat, #0
+		beq	43f
+		and	\irqnr, \irqnr, #7
+		teq	\irqnr, #2
+		bne	44f
+43:		mov	\irqstat, #0x0C
+		strb	\irqstat, [r4, #0xa0]		@outb(0x0C, 0xA0) /* Poll command */
+		ldrb	\irqnr, [r4, #0xa0]		@irq = (inb(0xA0) & 7) + 8
+		and	\irqstat, \irqnr, #0x80
+		teq	\irqstat, #0
+		beq	44f
+		and	\irqnr, \irqnr, #7
+		add	\irqnr, \irqnr, #8
+44:		teq	\irqstat, #0
+		.endm
+
diff --git a/arch/arm/mach-shark/include/mach/hardware.h b/arch/arm/mach-shark/include/mach/hardware.h
new file mode 100644
index 000000000000..cb0ee2943c1a
--- /dev/null
+++ b/arch/arm/mach-shark/include/mach/hardware.h
@@ -0,0 +1,51 @@
+/*
+ * arch/arm/mach-shark/include/mach/hardware.h
+ *
+ * by Alexander Schulz
+ *
+ * derived from:
+ * arch/arm/mach-ebsa110/include/mach/hardware.h
+ * Copyright (C) 1996-1999 Russell King.
+ */
+#ifndef __ASM_ARCH_HARDWARE_H
+#define __ASM_ARCH_HARDWARE_H
+
+#ifndef __ASSEMBLY__
+
+/*
+ * Mapping areas
+ */
+#define IO_BASE			0xe0000000
+
+#else
+
+#define IO_BASE			0
+
+#endif
+
+#define IO_SIZE			0x08000000
+#define IO_START		0x40000000
+#define ROMCARD_SIZE		0x08000000
+#define ROMCARD_START		0x10000000
+
+#define PCIO_BASE		0xe0000000
+
+
+/* defines for the Framebuffer */
+#define FB_START		0x06000000
+#define FB_SIZE			0x01000000
+
+#define UNCACHEABLE_ADDR        0xdf010000
+
+#define SEQUOIA_LED_GREEN       (1<<6)
+#define SEQUOIA_LED_AMBER       (1<<5)
+#define SEQUOIA_LED_BACK        (1<<7)
+
+#define pcibios_assign_all_busses()     1
+
+#define PCIBIOS_MIN_IO          0x6000
+#define PCIBIOS_MIN_MEM         0x50000000
+#define PCIMEM_BASE		0xe8000000
+
+#endif
+
diff --git a/arch/arm/mach-shark/include/mach/io.h b/arch/arm/mach-shark/include/mach/io.h
new file mode 100644
index 000000000000..92475922c068
--- /dev/null
+++ b/arch/arm/mach-shark/include/mach/io.h
@@ -0,0 +1,56 @@
+/*
+ * arch/arm/mach-shark/include/mach/io.h
+ *
+ * by Alexander Schulz
+ *
+ * derived from:
+ * arch/arm/mach-ebsa110/include/mach/io.h
+ * Copyright (C) 1997,1998 Russell King
+ */
+
+#ifndef __ASM_ARM_ARCH_IO_H
+#define __ASM_ARM_ARCH_IO_H
+
+#include <mach/hardware.h>
+
+#define IO_SPACE_LIMIT 0xffffffff
+
+/*
+ * We use two different types of addressing - PC style addresses, and ARM
+ * addresses.  PC style accesses the PC hardware with the normal PC IO
+ * addresses, eg 0x3f8 for serial#1.  ARM addresses are 0x80000000+
+ * and are translated to the start of IO.
+ */
+#define __PORT_PCIO(x)	(!((x) & 0x80000000))
+
+#define __io(a)                 ((void __iomem *)(PCIO_BASE + (a)))
+
+
+static inline unsigned int __ioaddr (unsigned int port)			\
+{										\
+	if (__PORT_PCIO(port))							\
+		return (unsigned int)(PCIO_BASE + (port));			\
+	else									\
+		return (unsigned int)(IO_BASE + (port));			\
+}
+
+#define __mem_pci(addr) (addr)
+
+/*
+ * Translated address IO functions
+ *
+ * IO address has already been translated to a virtual address
+ */
+#define outb_t(v,p)								\
+	(*(volatile unsigned char *)(p) = (v))
+
+#define inb_t(p)								\
+	(*(volatile unsigned char *)(p))
+
+#define outl_t(v,p)								\
+	(*(volatile unsigned long *)(p) = (v))
+
+#define inl_t(p)								\
+	(*(volatile unsigned long *)(p))
+
+#endif
diff --git a/arch/arm/mach-shark/include/mach/irqs.h b/arch/arm/mach-shark/include/mach/irqs.h
new file mode 100644
index 000000000000..0586acd7cdd5
--- /dev/null
+++ b/arch/arm/mach-shark/include/mach/irqs.h
@@ -0,0 +1,13 @@
+/*
+ * arch/arm/mach-shark/include/mach/irqs.h
+ *
+ * by Alexander Schulz
+ */
+
+#define NR_IRQS			16
+
+#define IRQ_ISA_KEYBOARD	 1
+#define RTC_IRQ			 8
+#define I8042_KBD_IRQ		 1
+#define I8042_AUX_IRQ		12
+#define IRQ_HARDDISK            14
diff --git a/arch/arm/mach-shark/include/mach/memory.h b/arch/arm/mach-shark/include/mach/memory.h
new file mode 100644
index 000000000000..b7874ad9f9f6
--- /dev/null
+++ b/arch/arm/mach-shark/include/mach/memory.h
@@ -0,0 +1,48 @@
+/*
+ * arch/arm/mach-shark/include/mach/memory.h
+ *
+ * by Alexander Schulz
+ *
+ * derived from:
+ * arch/arm/mach-ebsa110/include/mach/memory.h
+ * Copyright (c) 1996-1999 Russell King.
+ */
+#ifndef __ASM_ARCH_MEMORY_H
+#define __ASM_ARCH_MEMORY_H
+
+#include <asm/sizes.h>
+
+/*
+ * Physical DRAM offset.
+ */
+#define PHYS_OFFSET     UL(0x08000000)
+
+#ifndef __ASSEMBLY__
+
+static inline void __arch_adjust_zones(int node, unsigned long *zone_size, unsigned long *zhole_size) 
+{
+  if (node != 0) return;
+  /* Only the first 4 MB (=1024 Pages) are usable for DMA */
+  zone_size[1] = zone_size[0] - 1024;
+  zone_size[0] = 1024;
+  zhole_size[1] = zhole_size[0];
+  zhole_size[0] = 0;
+}
+
+#define arch_adjust_zones(node, size, holes) \
+	__arch_adjust_zones(node, size, holes)
+
+#define ISA_DMA_THRESHOLD	(PHYS_OFFSET + SZ_4M - 1)
+
+#endif
+
+#define __virt_to_bus(x)	__virt_to_phys(x)
+#define __bus_to_virt(x)	__phys_to_virt(x)
+
+/*
+ * Cache flushing area
+ */
+#define FLUSH_BASE_PHYS		0x80000000
+#define FLUSH_BASE		0xdf000000
+
+#endif
diff --git a/arch/arm/mach-shark/include/mach/system.h b/arch/arm/mach-shark/include/mach/system.h
new file mode 100644
index 000000000000..85aceef6f874
--- /dev/null
+++ b/arch/arm/mach-shark/include/mach/system.h
@@ -0,0 +1,28 @@
+/*
+ * arch/arm/mach-shark/include/mach/system.h
+ *
+ * by Alexander Schulz
+ */
+#ifndef __ASM_ARCH_SYSTEM_H
+#define __ASM_ARCH_SYSTEM_H
+
+#include <asm/io.h>
+
+static void arch_reset(char mode)
+{
+	short temp;
+	local_irq_disable();
+	/* Reset the Machine via pc[3] of the sequoia chipset */
+	outw(0x09,0x24);
+	temp=inw(0x26);
+	temp = temp | (1<<3) | (1<<10);
+	outw(0x09,0x24);
+	outw(temp,0x26);
+
+}
+
+static inline void arch_idle(void)
+{
+}
+
+#endif
diff --git a/arch/arm/mach-shark/include/mach/timex.h b/arch/arm/mach-shark/include/mach/timex.h
new file mode 100644
index 000000000000..bb6eeaebed86
--- /dev/null
+++ b/arch/arm/mach-shark/include/mach/timex.h
@@ -0,0 +1,7 @@
+/*
+ * arch/arm/mach-shark/include/mach/timex.h
+ *
+ * by Alexander Schulz
+ */
+
+#define CLOCK_TICK_RATE 1193180
diff --git a/arch/arm/mach-shark/include/mach/uncompress.h b/arch/arm/mach-shark/include/mach/uncompress.h
new file mode 100644
index 000000000000..3725e1633418
--- /dev/null
+++ b/arch/arm/mach-shark/include/mach/uncompress.h
@@ -0,0 +1,51 @@
+/*
+ * arch/arm/mach-shark/include/mach/uncompress.h
+ * by Alexander Schulz
+ *
+ * derived from:
+ * arch/arm/mach-footbridge/include/mach/uncompress.h
+ * Copyright (C) 1996,1997,1998 Russell King
+ */
+
+#define SERIAL_BASE ((volatile unsigned char *)0x400003f8)
+
+static inline void putc(int c)
+{
+	int t;
+
+	SERIAL_BASE[0] = c;
+	t=0x10000;
+	while (t--);
+}
+
+static inline void flush(void)
+{
+}
+
+#ifdef DEBUG
+static void putn(unsigned long z)
+{
+	int i;
+	char x;
+
+	putc('0');
+	putc('x');
+	for (i=0;i<8;i++) {
+		x='0'+((z>>((7-i)*4))&0xf);
+		if (x>'9') x=x-'0'+'A'-10;
+		putc(x);
+	}
+}
+
+static void putr()
+{
+	putc('\n');
+	putc('\r');
+}
+#endif
+
+/*
+ * nothing to do
+ */
+#define arch_decomp_setup()
+#define arch_decomp_wdog()
diff --git a/arch/arm/mach-shark/include/mach/vmalloc.h b/arch/arm/mach-shark/include/mach/vmalloc.h
new file mode 100644
index 000000000000..f6c6837c5451
--- /dev/null
+++ b/arch/arm/mach-shark/include/mach/vmalloc.h
@@ -0,0 +1,4 @@
+/*
+ * arch/arm/mach-shark/include/mach/vmalloc.h
+ */
+#define VMALLOC_END       (PAGE_OFFSET + 0x10000000)
diff --git a/arch/arm/mach-shark/irq.c b/arch/arm/mach-shark/irq.c
index 5b0c6af44ec6..44b0811b400c 100644
--- a/arch/arm/mach-shark/irq.c
+++ b/arch/arm/mach-shark/irq.c
@@ -4,7 +4,7 @@
  * by Alexander Schulz
  *
  * derived from linux/arch/ppc/kernel/i8259.c and:
- * include/asm-arm/arch-ebsa110/irq.h
+ * arch/arm/mach-ebsa110/include/mach/irq.h
  * Copyright (C) 1996-1998 Russell King
  */
 
diff --git a/arch/arm/mach-shark/leds.c b/arch/arm/mach-shark/leds.c
index 5386a81f796a..b1896471aa3c 100644
--- a/arch/arm/mach-shark/leds.c
+++ b/arch/arm/mach-shark/leds.c
@@ -21,7 +21,7 @@
 #include <linux/spinlock.h>
 #include <linux/ioport.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/leds.h>
 #include <asm/io.h>
 #include <asm/system.h>
diff --git a/arch/arm/mach-versatile/core.c b/arch/arm/mach-versatile/core.c
index a7dd09436cbc..d75e795c893e 100644
--- a/arch/arm/mach-versatile/core.c
+++ b/arch/arm/mach-versatile/core.c
@@ -31,7 +31,7 @@
 
 #include <asm/cnt32_to_63.h>
 #include <asm/system.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 #include <asm/irq.h>
 #include <asm/leds.h>
diff --git a/arch/arm/mach-versatile/include/mach/debug-macro.S b/arch/arm/mach-versatile/include/mach/debug-macro.S
new file mode 100644
index 000000000000..b4ac00eacf68
--- /dev/null
+++ b/arch/arm/mach-versatile/include/mach/debug-macro.S
@@ -0,0 +1,23 @@
+/* arch/arm/mach-versatile/include/mach/debug-macro.S
+ *
+ * Debugging macro include header
+ *
+ *  Copyright (C) 1994-1999 Russell King
+ *  Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+*/
+
+		.macro	addruart,rx
+		mrc	p15, 0, \rx, c1, c0
+		tst	\rx, #1			@ MMU enabled?
+		moveq	\rx,      #0x10000000
+		movne	\rx,      #0xf1000000	@ virtual base
+		orr	\rx, \rx, #0x001F0000
+		orr	\rx, \rx, #0x00001000
+		.endm
+
+#include <asm/hardware/debug-pl01x.S>
diff --git a/arch/arm/mach-versatile/include/mach/dma.h b/arch/arm/mach-versatile/include/mach/dma.h
new file mode 100644
index 000000000000..0aabf12c8834
--- /dev/null
+++ b/arch/arm/mach-versatile/include/mach/dma.h
@@ -0,0 +1,20 @@
+/*
+ *  arch/arm/mach-versatile/include/mach/dma.h
+ *
+ *  Copyright (C) 2003 ARM Limited.
+ *  Copyright (C) 1997,1998 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
diff --git a/arch/arm/mach-versatile/include/mach/entry-macro.S b/arch/arm/mach-versatile/include/mach/entry-macro.S
new file mode 100644
index 000000000000..8c8020980585
--- /dev/null
+++ b/arch/arm/mach-versatile/include/mach/entry-macro.S
@@ -0,0 +1,44 @@
+/*
+ * arch/arm/mach-versatile/include/mach/entry-macro.S
+ *
+ * Low-level IRQ helper macros for Versatile platforms
+ *
+ * This file is licensed under  the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+#include <mach/hardware.h>
+#include <asm/hardware/vic.h>
+
+		.macro	disable_fiq
+		.endm
+
+		.macro  get_irqnr_preamble, base, tmp
+		ldr	\base, =IO_ADDRESS(VERSATILE_VIC_BASE)
+		.endm
+
+		.macro  arch_ret_to_user, tmp1, tmp2
+		.endm
+
+		.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
+		ldr	\irqstat, [\base, #VIC_IRQ_STATUS]	@ get masked status
+		mov	\irqnr, #0
+		teq	\irqstat, #0
+		beq	1003f
+
+1001:		tst	\irqstat, #15
+		bne	1002f
+		add	\irqnr, \irqnr, #4
+		movs	\irqstat, \irqstat, lsr #4
+		bne	1001b
+1002:		tst	\irqstat, #1
+		bne	1003f
+		add	\irqnr, \irqnr, #1
+		movs	\irqstat, \irqstat, lsr #1
+		bne	1002b
+1003:		/* EQ will be set if no irqs pending */
+
+@		clz	\irqnr, \irqstat
+@1003:		/* EQ will be set if we reach MAXIRQNUM */
+		.endm
+
diff --git a/arch/arm/mach-versatile/include/mach/hardware.h b/arch/arm/mach-versatile/include/mach/hardware.h
new file mode 100644
index 000000000000..7aa906c93154
--- /dev/null
+++ b/arch/arm/mach-versatile/include/mach/hardware.h
@@ -0,0 +1,52 @@
+/*
+ *  arch/arm/mach-versatile/include/mach/hardware.h
+ *
+ *  This file contains the hardware definitions of the Versatile boards.
+ *
+ *  Copyright (C) 2003 ARM Limited.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#ifndef __ASM_ARCH_HARDWARE_H
+#define __ASM_ARCH_HARDWARE_H
+
+#include <asm/sizes.h>
+#include <mach/platform.h>
+
+/*
+ * PCI space virtual addresses
+ */
+#define VERSATILE_PCI_VIRT_BASE		(void __iomem *)0xe8000000ul
+#define VERSATILE_PCI_CFG_VIRT_BASE	(void __iomem *)0xe9000000ul
+
+#if 0
+#define VERSATILE_PCI_VIRT_MEM_BASE0	0xf4000000
+#define VERSATILE_PCI_VIRT_MEM_BASE1	0xf5000000
+#define VERSATILE_PCI_VIRT_MEM_BASE2	0xf6000000
+
+#define PCIO_BASE			VERSATILE_PCI_VIRT_MEM_BASE0
+#define PCIMEM_BASE			VERSATILE_PCI_VIRT_MEM_BASE1
+#endif
+
+/* CIK guesswork */
+#define PCIBIOS_MIN_IO			0x44000000
+#define PCIBIOS_MIN_MEM			0x50000000
+
+#define pcibios_assign_all_busses()     1
+
+/* macro to get at IO space when running virtually */
+#define IO_ADDRESS(x)		(((x) & 0x0fffffff) + (((x) >> 4) & 0x0f000000) + 0xf0000000)
+
+#endif
diff --git a/arch/arm/mach-versatile/include/mach/io.h b/arch/arm/mach-versatile/include/mach/io.h
new file mode 100644
index 000000000000..c0b9dd1d0257
--- /dev/null
+++ b/arch/arm/mach-versatile/include/mach/io.h
@@ -0,0 +1,32 @@
+/*
+ *  arch/arm/mach-versatile/include/mach/io.h
+ *
+ *  Copyright (C) 2003 ARM Limited
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#ifndef __ASM_ARM_ARCH_IO_H
+#define __ASM_ARM_ARCH_IO_H
+
+#define IO_SPACE_LIMIT 0xffffffff
+
+static inline void __iomem *__io(unsigned long addr)
+{
+	return (void __iomem *)addr;
+}
+#define __io(a)	__io(a)
+#define __mem_pci(a)		(a)
+
+#endif
diff --git a/arch/arm/mach-versatile/include/mach/irqs.h b/arch/arm/mach-versatile/include/mach/irqs.h
new file mode 100644
index 000000000000..216a1312e62e
--- /dev/null
+++ b/arch/arm/mach-versatile/include/mach/irqs.h
@@ -0,0 +1,211 @@
+/*
+ *  arch/arm/mach-versatile/include/mach/irqs.h
+ *
+ *  Copyright (C) 2003 ARM Limited
+ *  Copyright (C) 2000 Deep Blue Solutions Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#include <mach/platform.h>
+
+/* 
+ *  IRQ interrupts definitions are the same as the INT definitions
+ *  held within platform.h
+ */
+#define IRQ_VIC_START		0
+#define IRQ_WDOGINT		(IRQ_VIC_START + INT_WDOGINT)
+#define IRQ_SOFTINT		(IRQ_VIC_START + INT_SOFTINT)
+#define IRQ_COMMRx		(IRQ_VIC_START + INT_COMMRx)
+#define IRQ_COMMTx		(IRQ_VIC_START + INT_COMMTx)
+#define IRQ_TIMERINT0_1		(IRQ_VIC_START + INT_TIMERINT0_1)
+#define IRQ_TIMERINT2_3		(IRQ_VIC_START + INT_TIMERINT2_3)
+#define IRQ_GPIOINT0		(IRQ_VIC_START + INT_GPIOINT0)
+#define IRQ_GPIOINT1		(IRQ_VIC_START + INT_GPIOINT1)
+#define IRQ_GPIOINT2		(IRQ_VIC_START + INT_GPIOINT2)
+#define IRQ_GPIOINT3		(IRQ_VIC_START + INT_GPIOINT3)
+#define IRQ_RTCINT		(IRQ_VIC_START + INT_RTCINT)
+#define IRQ_SSPINT		(IRQ_VIC_START + INT_SSPINT)
+#define IRQ_UARTINT0		(IRQ_VIC_START + INT_UARTINT0)
+#define IRQ_UARTINT1		(IRQ_VIC_START + INT_UARTINT1)
+#define IRQ_UARTINT2		(IRQ_VIC_START + INT_UARTINT2)
+#define IRQ_SCIINT		(IRQ_VIC_START + INT_SCIINT)
+#define IRQ_CLCDINT		(IRQ_VIC_START + INT_CLCDINT)
+#define IRQ_DMAINT		(IRQ_VIC_START + INT_DMAINT)
+#define IRQ_PWRFAILINT 		(IRQ_VIC_START + INT_PWRFAILINT)
+#define IRQ_MBXINT		(IRQ_VIC_START + INT_MBXINT)
+#define IRQ_GNDINT		(IRQ_VIC_START + INT_GNDINT)
+#define IRQ_VICSOURCE21		(IRQ_VIC_START + INT_VICSOURCE21)
+#define IRQ_VICSOURCE22		(IRQ_VIC_START + INT_VICSOURCE22)
+#define IRQ_VICSOURCE23		(IRQ_VIC_START + INT_VICSOURCE23)
+#define IRQ_VICSOURCE24		(IRQ_VIC_START + INT_VICSOURCE24)
+#define IRQ_VICSOURCE25		(IRQ_VIC_START + INT_VICSOURCE25)
+#define IRQ_VICSOURCE26		(IRQ_VIC_START + INT_VICSOURCE26)
+#define IRQ_VICSOURCE27		(IRQ_VIC_START + INT_VICSOURCE27)
+#define IRQ_VICSOURCE28		(IRQ_VIC_START + INT_VICSOURCE28)
+#define IRQ_VICSOURCE29		(IRQ_VIC_START + INT_VICSOURCE29)
+#define IRQ_VICSOURCE30		(IRQ_VIC_START + INT_VICSOURCE30)
+#define IRQ_VICSOURCE31		(IRQ_VIC_START + INT_VICSOURCE31)
+#define IRQ_VIC_END		(IRQ_VIC_START + 31)
+
+#define IRQMASK_WDOGINT		INTMASK_WDOGINT
+#define IRQMASK_SOFTINT		INTMASK_SOFTINT
+#define IRQMASK_COMMRx 		INTMASK_COMMRx
+#define IRQMASK_COMMTx 		INTMASK_COMMTx
+#define IRQMASK_TIMERINT0_1	INTMASK_TIMERINT0_1
+#define IRQMASK_TIMERINT2_3	INTMASK_TIMERINT2_3
+#define IRQMASK_GPIOINT0	INTMASK_GPIOINT0
+#define IRQMASK_GPIOINT1	INTMASK_GPIOINT1
+#define IRQMASK_GPIOINT2	INTMASK_GPIOINT2
+#define IRQMASK_GPIOINT3	INTMASK_GPIOINT3
+#define IRQMASK_RTCINT 		INTMASK_RTCINT
+#define IRQMASK_SSPINT 		INTMASK_SSPINT
+#define IRQMASK_UARTINT0	INTMASK_UARTINT0
+#define IRQMASK_UARTINT1	INTMASK_UARTINT1
+#define IRQMASK_UARTINT2	INTMASK_UARTINT2
+#define IRQMASK_SCIINT 		INTMASK_SCIINT
+#define IRQMASK_CLCDINT		INTMASK_CLCDINT
+#define IRQMASK_DMAINT 		INTMASK_DMAINT
+#define IRQMASK_PWRFAILINT	INTMASK_PWRFAILINT
+#define IRQMASK_MBXINT 		INTMASK_MBXINT
+#define IRQMASK_GNDINT 		INTMASK_GNDINT
+#define IRQMASK_VICSOURCE21	INTMASK_VICSOURCE21
+#define IRQMASK_VICSOURCE22	INTMASK_VICSOURCE22
+#define IRQMASK_VICSOURCE23	INTMASK_VICSOURCE23
+#define IRQMASK_VICSOURCE24	INTMASK_VICSOURCE24
+#define IRQMASK_VICSOURCE25	INTMASK_VICSOURCE25
+#define IRQMASK_VICSOURCE26	INTMASK_VICSOURCE26
+#define IRQMASK_VICSOURCE27	INTMASK_VICSOURCE27
+#define IRQMASK_VICSOURCE28	INTMASK_VICSOURCE28
+#define IRQMASK_VICSOURCE29	INTMASK_VICSOURCE29
+#define IRQMASK_VICSOURCE30	INTMASK_VICSOURCE30
+#define IRQMASK_VICSOURCE31	INTMASK_VICSOURCE31
+
+/* 
+ *  FIQ interrupts definitions are the same as the INT definitions.
+ */
+#define FIQ_WDOGINT		INT_WDOGINT
+#define FIQ_SOFTINT		INT_SOFTINT
+#define FIQ_COMMRx		INT_COMMRx
+#define FIQ_COMMTx		INT_COMMTx
+#define FIQ_TIMERINT0_1		INT_TIMERINT0_1
+#define FIQ_TIMERINT2_3		INT_TIMERINT2_3
+#define FIQ_GPIOINT0		INT_GPIOINT0
+#define FIQ_GPIOINT1		INT_GPIOINT1
+#define FIQ_GPIOINT2		INT_GPIOINT2
+#define FIQ_GPIOINT3		INT_GPIOINT3
+#define FIQ_RTCINT		INT_RTCINT
+#define FIQ_SSPINT		INT_SSPINT
+#define FIQ_UARTINT0		INT_UARTINT0
+#define FIQ_UARTINT1		INT_UARTINT1
+#define FIQ_UARTINT2		INT_UARTINT2
+#define FIQ_SCIINT		INT_SCIINT
+#define FIQ_CLCDINT		INT_CLCDINT
+#define FIQ_DMAINT		INT_DMAINT
+#define FIQ_PWRFAILINT 		INT_PWRFAILINT
+#define FIQ_MBXINT		INT_MBXINT
+#define FIQ_GNDINT		INT_GNDINT
+#define FIQ_VICSOURCE21		INT_VICSOURCE21
+#define FIQ_VICSOURCE22		INT_VICSOURCE22
+#define FIQ_VICSOURCE23		INT_VICSOURCE23
+#define FIQ_VICSOURCE24		INT_VICSOURCE24
+#define FIQ_VICSOURCE25		INT_VICSOURCE25
+#define FIQ_VICSOURCE26		INT_VICSOURCE26
+#define FIQ_VICSOURCE27		INT_VICSOURCE27
+#define FIQ_VICSOURCE28		INT_VICSOURCE28
+#define FIQ_VICSOURCE29		INT_VICSOURCE29
+#define FIQ_VICSOURCE30		INT_VICSOURCE30
+#define FIQ_VICSOURCE31		INT_VICSOURCE31
+
+
+#define FIQMASK_WDOGINT		INTMASK_WDOGINT
+#define FIQMASK_SOFTINT		INTMASK_SOFTINT
+#define FIQMASK_COMMRx 		INTMASK_COMMRx
+#define FIQMASK_COMMTx 		INTMASK_COMMTx
+#define FIQMASK_TIMERINT0_1	INTMASK_TIMERINT0_1
+#define FIQMASK_TIMERINT2_3	INTMASK_TIMERINT2_3
+#define FIQMASK_GPIOINT0	INTMASK_GPIOINT0
+#define FIQMASK_GPIOINT1	INTMASK_GPIOINT1
+#define FIQMASK_GPIOINT2	INTMASK_GPIOINT2
+#define FIQMASK_GPIOINT3	INTMASK_GPIOINT3
+#define FIQMASK_RTCINT 		INTMASK_RTCINT
+#define FIQMASK_SSPINT 		INTMASK_SSPINT
+#define FIQMASK_UARTINT0	INTMASK_UARTINT0
+#define FIQMASK_UARTINT1	INTMASK_UARTINT1
+#define FIQMASK_UARTINT2	INTMASK_UARTINT2
+#define FIQMASK_SCIINT 		INTMASK_SCIINT
+#define FIQMASK_CLCDINT		INTMASK_CLCDINT
+#define FIQMASK_DMAINT 		INTMASK_DMAINT
+#define FIQMASK_PWRFAILINT	INTMASK_PWRFAILINT
+#define FIQMASK_MBXINT 		INTMASK_MBXINT
+#define FIQMASK_GNDINT 		INTMASK_GNDINT
+#define FIQMASK_VICSOURCE21	INTMASK_VICSOURCE21
+#define FIQMASK_VICSOURCE22	INTMASK_VICSOURCE22
+#define FIQMASK_VICSOURCE23	INTMASK_VICSOURCE23
+#define FIQMASK_VICSOURCE24	INTMASK_VICSOURCE24
+#define FIQMASK_VICSOURCE25	INTMASK_VICSOURCE25
+#define FIQMASK_VICSOURCE26	INTMASK_VICSOURCE26
+#define FIQMASK_VICSOURCE27	INTMASK_VICSOURCE27
+#define FIQMASK_VICSOURCE28	INTMASK_VICSOURCE28
+#define FIQMASK_VICSOURCE29	INTMASK_VICSOURCE29
+#define FIQMASK_VICSOURCE30	INTMASK_VICSOURCE30
+#define FIQMASK_VICSOURCE31	INTMASK_VICSOURCE31
+
+/*
+ * Secondary interrupt controller
+ */
+#define IRQ_SIC_START		32
+#define IRQ_SIC_MMCI0B 		(IRQ_SIC_START + SIC_INT_MMCI0B)
+#define IRQ_SIC_MMCI1B 		(IRQ_SIC_START + SIC_INT_MMCI1B)
+#define IRQ_SIC_KMI0		(IRQ_SIC_START + SIC_INT_KMI0)
+#define IRQ_SIC_KMI1		(IRQ_SIC_START + SIC_INT_KMI1)
+#define IRQ_SIC_SCI3		(IRQ_SIC_START + SIC_INT_SCI3)
+#define IRQ_SIC_UART3		(IRQ_SIC_START + SIC_INT_UART3)
+#define IRQ_SIC_CLCD		(IRQ_SIC_START + SIC_INT_CLCD)
+#define IRQ_SIC_TOUCH		(IRQ_SIC_START + SIC_INT_TOUCH)
+#define IRQ_SIC_KEYPAD 		(IRQ_SIC_START + SIC_INT_KEYPAD)
+#define IRQ_SIC_DoC		(IRQ_SIC_START + SIC_INT_DoC)
+#define IRQ_SIC_MMCI0A 		(IRQ_SIC_START + SIC_INT_MMCI0A)
+#define IRQ_SIC_MMCI1A 		(IRQ_SIC_START + SIC_INT_MMCI1A)
+#define IRQ_SIC_AACI		(IRQ_SIC_START + SIC_INT_AACI)
+#define IRQ_SIC_ETH		(IRQ_SIC_START + SIC_INT_ETH)
+#define IRQ_SIC_USB		(IRQ_SIC_START + SIC_INT_USB)
+#define IRQ_SIC_PCI0		(IRQ_SIC_START + SIC_INT_PCI0)
+#define IRQ_SIC_PCI1		(IRQ_SIC_START + SIC_INT_PCI1)
+#define IRQ_SIC_PCI2		(IRQ_SIC_START + SIC_INT_PCI2)
+#define IRQ_SIC_PCI3		(IRQ_SIC_START + SIC_INT_PCI3)
+#define IRQ_SIC_END		63
+
+#define SIC_IRQMASK_MMCI0B	SIC_INTMASK_MMCI0B
+#define SIC_IRQMASK_MMCI1B	SIC_INTMASK_MMCI1B
+#define SIC_IRQMASK_KMI0	SIC_INTMASK_KMI0
+#define SIC_IRQMASK_KMI1	SIC_INTMASK_KMI1
+#define SIC_IRQMASK_SCI3	SIC_INTMASK_SCI3
+#define SIC_IRQMASK_UART3	SIC_INTMASK_UART3
+#define SIC_IRQMASK_CLCD	SIC_INTMASK_CLCD
+#define SIC_IRQMASK_TOUCH	SIC_INTMASK_TOUCH
+#define SIC_IRQMASK_KEYPAD	SIC_INTMASK_KEYPAD
+#define SIC_IRQMASK_DoC		SIC_INTMASK_DoC
+#define SIC_IRQMASK_MMCI0A	SIC_INTMASK_MMCI0A
+#define SIC_IRQMASK_MMCI1A	SIC_INTMASK_MMCI1A
+#define SIC_IRQMASK_AACI	SIC_INTMASK_AACI
+#define SIC_IRQMASK_ETH		SIC_INTMASK_ETH
+#define SIC_IRQMASK_USB		SIC_INTMASK_USB
+#define SIC_IRQMASK_PCI0	SIC_INTMASK_PCI0
+#define SIC_IRQMASK_PCI1	SIC_INTMASK_PCI1
+#define SIC_IRQMASK_PCI2	SIC_INTMASK_PCI2
+#define SIC_IRQMASK_PCI3	SIC_INTMASK_PCI3
+
+#define NR_IRQS			64
diff --git a/arch/arm/mach-versatile/include/mach/memory.h b/arch/arm/mach-versatile/include/mach/memory.h
new file mode 100644
index 000000000000..b6315c0602ac
--- /dev/null
+++ b/arch/arm/mach-versatile/include/mach/memory.h
@@ -0,0 +1,38 @@
+/*
+ *  arch/arm/mach-versatile/include/mach/memory.h
+ *
+ *  Copyright (C) 2003 ARM Limited
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#ifndef __ASM_ARCH_MEMORY_H
+#define __ASM_ARCH_MEMORY_H
+
+/*
+ * Physical DRAM offset.
+ */
+#define PHYS_OFFSET	UL(0x00000000)
+
+/*
+ * Virtual view <-> DMA view memory address translations
+ * virt_to_bus: Used to translate the virtual address to an
+ *              address suitable to be passed to set_dma_addr
+ * bus_to_virt: Used to convert an address for DMA operations
+ *              to an address that the kernel can use.
+ */
+#define __virt_to_bus(x)	((x) - PAGE_OFFSET)
+#define __bus_to_virt(x)	((x) + PAGE_OFFSET)
+
+#endif
diff --git a/arch/arm/mach-versatile/include/mach/platform.h b/arch/arm/mach-versatile/include/mach/platform.h
new file mode 100644
index 000000000000..27cbe6a3f220
--- /dev/null
+++ b/arch/arm/mach-versatile/include/mach/platform.h
@@ -0,0 +1,510 @@
+/*
+ * arch/arm/mach-versatile/include/mach/platform.h
+ *
+ * Copyright (c) ARM Limited 2003.  All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#ifndef __address_h
+#define __address_h                     1
+
+/*
+ * Memory definitions
+ */
+#define VERSATILE_BOOT_ROM_LO          0x30000000		/* DoC Base (64Mb)...*/
+#define VERSATILE_BOOT_ROM_HI          0x30000000
+#define VERSATILE_BOOT_ROM_BASE        VERSATILE_BOOT_ROM_HI	 /*  Normal position */
+#define VERSATILE_BOOT_ROM_SIZE        SZ_64M
+
+#define VERSATILE_SSRAM_BASE           /* VERSATILE_SSMC_BASE ? */
+#define VERSATILE_SSRAM_SIZE           SZ_2M
+
+#define VERSATILE_FLASH_BASE           0x34000000
+#define VERSATILE_FLASH_SIZE           SZ_64M
+
+/* 
+ *  SDRAM
+ */
+#define VERSATILE_SDRAM_BASE           0x00000000
+
+/* 
+ *  Logic expansion modules
+ * 
+ */
+
+
+/* ------------------------------------------------------------------------
+ *  Versatile Registers
+ * ------------------------------------------------------------------------
+ * 
+ */
+#define VERSATILE_SYS_ID_OFFSET               0x00
+#define VERSATILE_SYS_SW_OFFSET               0x04
+#define VERSATILE_SYS_LED_OFFSET              0x08
+#define VERSATILE_SYS_OSC0_OFFSET             0x0C
+
+#if defined(CONFIG_ARCH_VERSATILE_PB)
+#define VERSATILE_SYS_OSC1_OFFSET             0x10
+#define VERSATILE_SYS_OSC2_OFFSET             0x14
+#define VERSATILE_SYS_OSC3_OFFSET             0x18
+#define VERSATILE_SYS_OSC4_OFFSET             0x1C
+#elif defined(CONFIG_MACH_VERSATILE_AB)
+#define VERSATILE_SYS_OSC1_OFFSET             0x1C
+#endif
+
+#define VERSATILE_SYS_OSCCLCD_OFFSET          0x1c
+
+#define VERSATILE_SYS_LOCK_OFFSET             0x20
+#define VERSATILE_SYS_100HZ_OFFSET            0x24
+#define VERSATILE_SYS_CFGDATA1_OFFSET         0x28
+#define VERSATILE_SYS_CFGDATA2_OFFSET         0x2C
+#define VERSATILE_SYS_FLAGS_OFFSET            0x30
+#define VERSATILE_SYS_FLAGSSET_OFFSET         0x30
+#define VERSATILE_SYS_FLAGSCLR_OFFSET         0x34
+#define VERSATILE_SYS_NVFLAGS_OFFSET          0x38
+#define VERSATILE_SYS_NVFLAGSSET_OFFSET       0x38
+#define VERSATILE_SYS_NVFLAGSCLR_OFFSET       0x3C
+#define VERSATILE_SYS_RESETCTL_OFFSET         0x40
+#define VERSATILE_SYS_PCICTL_OFFSET           0x44
+#define VERSATILE_SYS_MCI_OFFSET              0x48
+#define VERSATILE_SYS_FLASH_OFFSET            0x4C
+#define VERSATILE_SYS_CLCD_OFFSET             0x50
+#define VERSATILE_SYS_CLCDSER_OFFSET          0x54
+#define VERSATILE_SYS_BOOTCS_OFFSET           0x58
+#define VERSATILE_SYS_24MHz_OFFSET            0x5C
+#define VERSATILE_SYS_MISC_OFFSET             0x60
+#define VERSATILE_SYS_TEST_OSC0_OFFSET        0x80
+#define VERSATILE_SYS_TEST_OSC1_OFFSET        0x84
+#define VERSATILE_SYS_TEST_OSC2_OFFSET        0x88
+#define VERSATILE_SYS_TEST_OSC3_OFFSET        0x8C
+#define VERSATILE_SYS_TEST_OSC4_OFFSET        0x90
+
+#define VERSATILE_SYS_BASE                    0x10000000
+#define VERSATILE_SYS_ID                      (VERSATILE_SYS_BASE + VERSATILE_SYS_ID_OFFSET)
+#define VERSATILE_SYS_SW                      (VERSATILE_SYS_BASE + VERSATILE_SYS_SW_OFFSET)
+#define VERSATILE_SYS_LED                     (VERSATILE_SYS_BASE + VERSATILE_SYS_LED_OFFSET)
+#define VERSATILE_SYS_OSC0                    (VERSATILE_SYS_BASE + VERSATILE_SYS_OSC0_OFFSET)
+#define VERSATILE_SYS_OSC1                    (VERSATILE_SYS_BASE + VERSATILE_SYS_OSC1_OFFSET)
+
+#if defined(CONFIG_ARCH_VERSATILE_PB)
+#define VERSATILE_SYS_OSC2                    (VERSATILE_SYS_BASE + VERSATILE_SYS_OSC2_OFFSET)
+#define VERSATILE_SYS_OSC3                    (VERSATILE_SYS_BASE + VERSATILE_SYS_OSC3_OFFSET)
+#define VERSATILE_SYS_OSC4                    (VERSATILE_SYS_BASE + VERSATILE_SYS_OSC4_OFFSET)
+#endif
+
+#define VERSATILE_SYS_LOCK                    (VERSATILE_SYS_BASE + VERSATILE_SYS_LOCK_OFFSET)
+#define VERSATILE_SYS_100HZ                   (VERSATILE_SYS_BASE + VERSATILE_SYS_100HZ_OFFSET)
+#define VERSATILE_SYS_CFGDATA1                (VERSATILE_SYS_BASE + VERSATILE_SYS_CFGDATA1_OFFSET)
+#define VERSATILE_SYS_CFGDATA2                (VERSATILE_SYS_BASE + VERSATILE_SYS_CFGDATA2_OFFSET)
+#define VERSATILE_SYS_FLAGS                   (VERSATILE_SYS_BASE + VERSATILE_SYS_FLAGS_OFFSET)
+#define VERSATILE_SYS_FLAGSSET                (VERSATILE_SYS_BASE + VERSATILE_SYS_FLAGSSET_OFFSET)
+#define VERSATILE_SYS_FLAGSCLR                (VERSATILE_SYS_BASE + VERSATILE_SYS_FLAGSCLR_OFFSET)
+#define VERSATILE_SYS_NVFLAGS                 (VERSATILE_SYS_BASE + VERSATILE_SYS_NVFLAGS_OFFSET)
+#define VERSATILE_SYS_NVFLAGSSET              (VERSATILE_SYS_BASE + VERSATILE_SYS_NVFLAGSSET_OFFSET)
+#define VERSATILE_SYS_NVFLAGSCLR              (VERSATILE_SYS_BASE + VERSATILE_SYS_NVFLAGSCLR_OFFSET)
+#define VERSATILE_SYS_RESETCTL                (VERSATILE_SYS_BASE + VERSATILE_SYS_RESETCTL_OFFSET)
+#define VERSATILE_SYS_PCICTL                  (VERSATILE_SYS_BASE + VERSATILE_SYS_PCICTL_OFFSET)
+#define VERSATILE_SYS_MCI                     (VERSATILE_SYS_BASE + VERSATILE_SYS_MCI_OFFSET)
+#define VERSATILE_SYS_FLASH                   (VERSATILE_SYS_BASE + VERSATILE_SYS_FLASH_OFFSET)
+#define VERSATILE_SYS_CLCD                    (VERSATILE_SYS_BASE + VERSATILE_SYS_CLCD_OFFSET)
+#define VERSATILE_SYS_CLCDSER                 (VERSATILE_SYS_BASE + VERSATILE_SYS_CLCDSER_OFFSET)
+#define VERSATILE_SYS_BOOTCS                  (VERSATILE_SYS_BASE + VERSATILE_SYS_BOOTCS_OFFSET)
+#define VERSATILE_SYS_24MHz                   (VERSATILE_SYS_BASE + VERSATILE_SYS_24MHz_OFFSET)
+#define VERSATILE_SYS_MISC                    (VERSATILE_SYS_BASE + VERSATILE_SYS_MISC_OFFSET)
+#define VERSATILE_SYS_TEST_OSC0               (VERSATILE_SYS_BASE + VERSATILE_SYS_TEST_OSC0_OFFSET)
+#define VERSATILE_SYS_TEST_OSC1               (VERSATILE_SYS_BASE + VERSATILE_SYS_TEST_OSC1_OFFSET)
+#define VERSATILE_SYS_TEST_OSC2               (VERSATILE_SYS_BASE + VERSATILE_SYS_TEST_OSC2_OFFSET)
+#define VERSATILE_SYS_TEST_OSC3               (VERSATILE_SYS_BASE + VERSATILE_SYS_TEST_OSC3_OFFSET)
+#define VERSATILE_SYS_TEST_OSC4               (VERSATILE_SYS_BASE + VERSATILE_SYS_TEST_OSC4_OFFSET)
+
+/* 
+ * Values for VERSATILE_SYS_RESET_CTRL
+ */
+#define VERSATILE_SYS_CTRL_RESET_CONFIGCLR    0x01
+#define VERSATILE_SYS_CTRL_RESET_CONFIGINIT   0x02
+#define VERSATILE_SYS_CTRL_RESET_DLLRESET     0x03
+#define VERSATILE_SYS_CTRL_RESET_PLLRESET     0x04
+#define VERSATILE_SYS_CTRL_RESET_POR          0x05
+#define VERSATILE_SYS_CTRL_RESET_DoC          0x06
+
+#define VERSATILE_SYS_CTRL_LED         (1 << 0)
+
+
+/* ------------------------------------------------------------------------
+ *  Versatile control registers
+ * ------------------------------------------------------------------------
+ */
+
+/* 
+ * VERSATILE_IDFIELD
+ *
+ * 31:24 = manufacturer (0x41 = ARM)
+ * 23:16 = architecture (0x08 = AHB system bus, ASB processor bus)
+ * 15:12 = FPGA (0x3 = XVC600 or XVC600E)
+ * 11:4  = build value
+ * 3:0   = revision number (0x1 = rev B (AHB))
+ */
+
+/*
+ * VERSATILE_SYS_LOCK
+ *     control access to SYS_OSCx, SYS_CFGDATAx, SYS_RESETCTL, 
+ *     SYS_CLD, SYS_BOOTCS
+ */
+#define VERSATILE_SYS_LOCK_LOCKED    (1 << 16)
+#define VERSATILE_SYS_LOCKVAL_MASK	0xFFFF		/* write 0xA05F to enable write access */
+
+/*
+ * VERSATILE_SYS_FLASH
+ */
+#define VERSATILE_FLASHPROG_FLVPPEN	(1 << 0)	/* Enable writing to flash */
+
+/*
+ * VERSATILE_INTREG
+ *     - used to acknowledge and control MMCI and UART interrupts 
+ */
+#define VERSATILE_INTREG_WPROT        0x00    /* MMC protection status (no interrupt generated) */
+#define VERSATILE_INTREG_RI0          0x01    /* Ring indicator UART0 is asserted,              */
+#define VERSATILE_INTREG_CARDIN       0x08    /* MMCI card in detect                            */
+                                                /* write 1 to acknowledge and clear               */
+#define VERSATILE_INTREG_RI1          0x02    /* Ring indicator UART1 is asserted,              */
+#define VERSATILE_INTREG_CARDINSERT   0x03    /* Signal insertion of MMC card                   */
+
+/*
+ * VERSATILE peripheral addresses
+ */
+#define VERSATILE_PCI_CORE_BASE        0x10001000	/* PCI core control */
+#define VERSATILE_I2C_BASE             0x10002000	/* I2C control */
+#define VERSATILE_SIC_BASE             0x10003000	/* Secondary interrupt controller */
+#define VERSATILE_AACI_BASE            0x10004000	/* Audio */
+#define VERSATILE_MMCI0_BASE           0x10005000	/* MMC interface */
+#define VERSATILE_KMI0_BASE            0x10006000	/* KMI interface */
+#define VERSATILE_KMI1_BASE            0x10007000	/* KMI 2nd interface */
+#define VERSATILE_CHAR_LCD_BASE        0x10008000	/* Character LCD */
+#define VERSATILE_UART3_BASE           0x10009000	/* UART 3 */
+#define VERSATILE_SCI1_BASE            0x1000A000
+#define VERSATILE_MMCI1_BASE           0x1000B000    /* MMC Interface */
+	/* 0x1000C000 - 0x1000CFFF = reserved */
+#define VERSATILE_ETH_BASE             0x10010000	/* Ethernet */
+#define VERSATILE_USB_BASE             0x10020000	/* USB */
+	/* 0x10030000 - 0x100FFFFF = reserved */
+#define VERSATILE_SMC_BASE             0x10100000	/* SMC */
+#define VERSATILE_MPMC_BASE            0x10110000	/* MPMC */
+#define VERSATILE_CLCD_BASE            0x10120000	/* CLCD */
+#define VERSATILE_DMAC_BASE            0x10130000	/* DMA controller */
+#define VERSATILE_VIC_BASE             0x10140000	/* Vectored interrupt controller */
+#define VERSATILE_PERIPH_BASE          0x10150000    /* off-chip peripherals alias from */
+                                                /* 0x10000000 - 0x100FFFFF */
+#define VERSATILE_AHBM_BASE            0x101D0000	/* AHB monitor */
+#define VERSATILE_SCTL_BASE            0x101E0000	/* System controller */
+#define VERSATILE_WATCHDOG_BASE        0x101E1000	/* Watchdog */
+#define VERSATILE_TIMER0_1_BASE        0x101E2000	/* Timer 0 and 1 */
+#define VERSATILE_TIMER2_3_BASE        0x101E3000	/* Timer 2 and 3 */
+#define VERSATILE_GPIO0_BASE           0x101E4000	/* GPIO port 0 */
+#define VERSATILE_GPIO1_BASE           0x101E5000    /* GPIO port 1 */
+#define VERSATILE_GPIO2_BASE           0x101E6000	/* GPIO port 2 */
+#define VERSATILE_GPIO3_BASE           0x101E7000	/* GPIO port 3 */
+#define VERSATILE_RTC_BASE             0x101E8000	/* Real Time Clock */
+	/* 0x101E9000 - reserved */
+#define VERSATILE_SCI_BASE             0x101F0000	/* Smart card controller */
+#define VERSATILE_UART0_BASE           0x101F1000	/* Uart 0 */
+#define VERSATILE_UART1_BASE           0x101F2000	/* Uart 1 */
+#define VERSATILE_UART2_BASE           0x101F3000	/* Uart 2 */
+#define VERSATILE_SSP_BASE             0x101F4000	/* Synchronous Serial Port */
+
+#define VERSATILE_SSMC_BASE            0x20000000	/* SSMC */
+#define VERSATILE_IB2_BASE             0x24000000	/* IB2 module */
+#define VERSATILE_MBX_BASE             0x40000000	/* MBX */
+
+/* PCI space */
+#define VERSATILE_PCI_BASE             0x41000000	/* PCI Interface */
+#define VERSATILE_PCI_CFG_BASE	       0x42000000
+#define VERSATILE_PCI_MEM_BASE0        0x44000000
+#define VERSATILE_PCI_MEM_BASE1        0x50000000
+#define VERSATILE_PCI_MEM_BASE2        0x60000000
+/* Sizes of above maps */
+#define VERSATILE_PCI_BASE_SIZE	       0x01000000
+#define VERSATILE_PCI_CFG_BASE_SIZE    0x02000000
+#define VERSATILE_PCI_MEM_BASE0_SIZE   0x0c000000	/* 32Mb */
+#define VERSATILE_PCI_MEM_BASE1_SIZE   0x10000000	/* 256Mb */
+#define VERSATILE_PCI_MEM_BASE2_SIZE   0x10000000	/* 256Mb */
+
+#define VERSATILE_SDRAM67_BASE         0x70000000	/* SDRAM banks 6 and 7 */
+#define VERSATILE_LT_BASE              0x80000000	/* Logic Tile expansion */
+
+/*
+ * Disk on Chip
+ */
+#define VERSATILE_DOC_BASE             0x2C000000
+#define VERSATILE_DOC_SIZE             (16 << 20)
+#define VERSATILE_DOC_PAGE_SIZE        512
+#define VERSATILE_DOC_TOTAL_PAGES     (DOC_SIZE / PAGE_SIZE)
+
+#define ERASE_UNIT_PAGES    32
+#define START_PAGE          0x80
+
+/* 
+ *  LED settings, bits [7:0]
+ */
+#define VERSATILE_SYS_LED0             (1 << 0)
+#define VERSATILE_SYS_LED1             (1 << 1)
+#define VERSATILE_SYS_LED2             (1 << 2)
+#define VERSATILE_SYS_LED3             (1 << 3)
+#define VERSATILE_SYS_LED4             (1 << 4)
+#define VERSATILE_SYS_LED5             (1 << 5)
+#define VERSATILE_SYS_LED6             (1 << 6)
+#define VERSATILE_SYS_LED7             (1 << 7)
+
+#define ALL_LEDS                  0xFF
+
+#define LED_BANK                  VERSATILE_SYS_LED
+
+/* 
+ * Control registers
+ */
+#define VERSATILE_IDFIELD_OFFSET	0x0	/* Versatile build information */
+#define VERSATILE_FLASHPROG_OFFSET	0x4	/* Flash devices */
+#define VERSATILE_INTREG_OFFSET		0x8	/* Interrupt control */
+#define VERSATILE_DECODE_OFFSET		0xC	/* Fitted logic modules */
+
+
+/* ------------------------------------------------------------------------
+ *  Versatile Interrupt Controller - control registers
+ * ------------------------------------------------------------------------
+ * 
+ *  Offsets from interrupt controller base 
+ * 
+ *  System Controller interrupt controller base is
+ * 
+ * 	VERSATILE_IC_BASE
+ * 
+ *  Core Module interrupt controller base is
+ * 
+ * 	VERSATILE_SYS_IC 
+ * 
+ */
+/* VIC definitions in include/asm-arm/hardware/vic.h */
+
+#define SIC_IRQ_STATUS                  0
+#define SIC_IRQ_RAW_STATUS              0x04
+#define SIC_IRQ_ENABLE                  0x08
+#define SIC_IRQ_ENABLE_SET              0x08
+#define SIC_IRQ_ENABLE_CLEAR            0x0C
+#define SIC_INT_SOFT_SET                0x10
+#define SIC_INT_SOFT_CLEAR              0x14
+#define SIC_INT_PIC_ENABLE              0x20	/* read status of pass through mask */
+#define SIC_INT_PIC_ENABLES             0x20	/* set interrupt pass through bits */
+#define SIC_INT_PIC_ENABLEC             0x24	/* Clear interrupt pass through bits */
+
+/* ------------------------------------------------------------------------
+ *  Interrupts - bit assignment (primary)
+ * ------------------------------------------------------------------------
+ */
+
+#define INT_WDOGINT                     0	/* Watchdog timer */
+#define INT_SOFTINT                     1	/* Software interrupt */
+#define INT_COMMRx                      2	/* Debug Comm Rx interrupt */
+#define INT_COMMTx                      3	/* Debug Comm Tx interrupt */
+#define INT_TIMERINT0_1                 4	/* Timer 0 and 1 */
+#define INT_TIMERINT2_3                 5	/* Timer 2 and 3 */
+#define INT_GPIOINT0                    6	/* GPIO 0 */
+#define INT_GPIOINT1                    7	/* GPIO 1 */
+#define INT_GPIOINT2                    8	/* GPIO 2 */
+#define INT_GPIOINT3                    9	/* GPIO 3 */
+#define INT_RTCINT                      10	/* Real Time Clock */
+#define INT_SSPINT                      11	/* Synchronous Serial Port */
+#define INT_UARTINT0                    12	/* UART 0 on development chip */
+#define INT_UARTINT1                    13	/* UART 1 on development chip */
+#define INT_UARTINT2                    14	/* UART 2 on development chip */
+#define INT_SCIINT                      15	/* Smart Card Interface */
+#define INT_CLCDINT                     16	/* CLCD controller */
+#define INT_DMAINT                      17	/* DMA controller */
+#define INT_PWRFAILINT                  18	/* Power failure */
+#define INT_MBXINT                      19	/* Graphics processor */
+#define INT_GNDINT                      20	/* Reserved */
+	/* External interrupt signals from logic tiles or secondary controller */
+#define INT_VICSOURCE21                 21	/* Disk on Chip */
+#define INT_VICSOURCE22                 22	/* MCI0A */
+#define INT_VICSOURCE23                 23	/* MCI1A */
+#define INT_VICSOURCE24                 24	/* AACI */
+#define INT_VICSOURCE25                 25	/* Ethernet */
+#define INT_VICSOURCE26                 26	/* USB */
+#define INT_VICSOURCE27                 27	/* PCI 0 */
+#define INT_VICSOURCE28                 28	/* PCI 1 */
+#define INT_VICSOURCE29                 29	/* PCI 2 */
+#define INT_VICSOURCE30                 30	/* PCI 3 */
+#define INT_VICSOURCE31                 31	/* SIC source */
+
+/* 
+ *  Interrupt bit positions
+ * 
+ */
+#define INTMASK_WDOGINT                 (1 << INT_WDOGINT)
+#define INTMASK_SOFTINT                 (1 << INT_SOFTINT)
+#define INTMASK_COMMRx                  (1 << INT_COMMRx)
+#define INTMASK_COMMTx                  (1 << INT_COMMTx)
+#define INTMASK_TIMERINT0_1             (1 << INT_TIMERINT0_1)
+#define INTMASK_TIMERINT2_3             (1 << INT_TIMERINT2_3)
+#define INTMASK_GPIOINT0                (1 << INT_GPIOINT0)
+#define INTMASK_GPIOINT1                (1 << INT_GPIOINT1)
+#define INTMASK_GPIOINT2                (1 << INT_GPIOINT2)
+#define INTMASK_GPIOINT3                (1 << INT_GPIOINT3)
+#define INTMASK_RTCINT                  (1 << INT_RTCINT)
+#define INTMASK_SSPINT                  (1 << INT_SSPINT)
+#define INTMASK_UARTINT0                (1 << INT_UARTINT0)
+#define INTMASK_UARTINT1                (1 << INT_UARTINT1)
+#define INTMASK_UARTINT2                (1 << INT_UARTINT2)
+#define INTMASK_SCIINT                  (1 << INT_SCIINT)
+#define INTMASK_CLCDINT                 (1 << INT_CLCDINT)
+#define INTMASK_DMAINT                  (1 << INT_DMAINT)
+#define INTMASK_PWRFAILINT              (1 << INT_PWRFAILINT)
+#define INTMASK_MBXINT                  (1 << INT_MBXINT)
+#define INTMASK_GNDINT                  (1 << INT_GNDINT)
+#define INTMASK_VICSOURCE21             (1 << INT_VICSOURCE21)
+#define INTMASK_VICSOURCE22             (1 << INT_VICSOURCE22)
+#define INTMASK_VICSOURCE23             (1 << INT_VICSOURCE23)
+#define INTMASK_VICSOURCE24             (1 << INT_VICSOURCE24)
+#define INTMASK_VICSOURCE25             (1 << INT_VICSOURCE25)
+#define INTMASK_VICSOURCE26             (1 << INT_VICSOURCE26)
+#define INTMASK_VICSOURCE27             (1 << INT_VICSOURCE27)
+#define INTMASK_VICSOURCE28             (1 << INT_VICSOURCE28)
+#define INTMASK_VICSOURCE29             (1 << INT_VICSOURCE29)
+#define INTMASK_VICSOURCE30             (1 << INT_VICSOURCE30)
+#define INTMASK_VICSOURCE31             (1 << INT_VICSOURCE31)
+
+
+#define VERSATILE_SC_VALID_INT               0x003FFFFF
+
+#define MAXIRQNUM                       31
+#define MAXFIQNUM                       31
+#define MAXSWINUM                       31
+
+/* ------------------------------------------------------------------------
+ *  Interrupts - bit assignment (secondary)
+ * ------------------------------------------------------------------------
+ */
+#define SIC_INT_MMCI0B                  1	/* Multimedia Card 0B */
+#define SIC_INT_MMCI1B                  2	/* Multimedia Card 1B */
+#define SIC_INT_KMI0                    3	/* Keyboard/Mouse port 0 */
+#define SIC_INT_KMI1                    4	/* Keyboard/Mouse port 1 */
+#define SIC_INT_SCI3                    5	/* Smart Card interface */
+#define SIC_INT_UART3                   6	/* UART 3 empty or data available */
+#define SIC_INT_CLCD                    7	/* Character LCD */
+#define SIC_INT_TOUCH                   8	/* Touchscreen */
+#define SIC_INT_KEYPAD                  9	/* Key pressed on display keypad */
+	/* 10:20 - reserved */
+#define SIC_INT_DoC                     21	/* Disk on Chip memory controller */
+#define SIC_INT_MMCI0A                  22	/* MMC 0A */
+#define SIC_INT_MMCI1A                  23	/* MMC 1A */
+#define SIC_INT_AACI                    24	/* Audio Codec */
+#define SIC_INT_ETH                     25	/* Ethernet controller */
+#define SIC_INT_USB                     26	/* USB controller */
+#define SIC_INT_PCI0                    27
+#define SIC_INT_PCI1                    28
+#define SIC_INT_PCI2                    29
+#define SIC_INT_PCI3                    30
+
+
+#define SIC_INTMASK_MMCI0B              (1 << SIC_INT_MMCI0B)
+#define SIC_INTMASK_MMCI1B              (1 << SIC_INT_MMCI1B)
+#define SIC_INTMASK_KMI0                (1 << SIC_INT_KMI0)
+#define SIC_INTMASK_KMI1                (1 << SIC_INT_KMI1)
+#define SIC_INTMASK_SCI3                (1 << SIC_INT_SCI3)
+#define SIC_INTMASK_UART3               (1 << SIC_INT_UART3)
+#define SIC_INTMASK_CLCD                (1 << SIC_INT_CLCD)
+#define SIC_INTMASK_TOUCH               (1 << SIC_INT_TOUCH)
+#define SIC_INTMASK_KEYPAD              (1 << SIC_INT_KEYPAD)
+#define SIC_INTMASK_DoC                 (1 << SIC_INT_DoC)
+#define SIC_INTMASK_MMCI0A              (1 << SIC_INT_MMCI0A)
+#define SIC_INTMASK_MMCI1A              (1 << SIC_INT_MMCI1A)
+#define SIC_INTMASK_AACI                (1 << SIC_INT_AACI)
+#define SIC_INTMASK_ETH                 (1 << SIC_INT_ETH)
+#define SIC_INTMASK_USB                 (1 << SIC_INT_USB)
+#define SIC_INTMASK_PCI0                (1 << SIC_INT_PCI0)
+#define SIC_INTMASK_PCI1                (1 << SIC_INT_PCI1)
+#define SIC_INTMASK_PCI2                (1 << SIC_INT_PCI2)
+#define SIC_INTMASK_PCI3                (1 << SIC_INT_PCI3)
+/* 
+ *  Application Flash
+ * 
+ */
+#define FLASH_BASE                      VERSATILE_FLASH_BASE
+#define FLASH_SIZE                      VERSATILE_FLASH_SIZE
+#define FLASH_END                       (FLASH_BASE + FLASH_SIZE - 1)
+#define FLASH_BLOCK_SIZE                SZ_128K
+
+/* 
+ *  Boot Flash
+ * 
+ */
+#define EPROM_BASE                      VERSATILE_BOOT_ROM_HI
+#define EPROM_SIZE                      VERSATILE_BOOT_ROM_SIZE
+#define EPROM_END                       (EPROM_BASE + EPROM_SIZE - 1)
+
+/* 
+ *  Clean base - dummy
+ * 
+ */
+#define CLEAN_BASE                      EPROM_BASE
+
+/*
+ * System controller bit assignment
+ */
+#define VERSATILE_REFCLK	0
+#define VERSATILE_TIMCLK	1
+
+#define VERSATILE_TIMER1_EnSel	15
+#define VERSATILE_TIMER2_EnSel	17
+#define VERSATILE_TIMER3_EnSel	19
+#define VERSATILE_TIMER4_EnSel	21
+
+
+#define MAX_TIMER                       2
+#define MAX_PERIOD                      699050
+#define TICKS_PER_uSEC                  1
+
+/* 
+ *  These are useconds NOT ticks.  
+ * 
+ */
+#define mSEC_1                          1000
+#define mSEC_5                          (mSEC_1 * 5)
+#define mSEC_10                         (mSEC_1 * 10)
+#define mSEC_25                         (mSEC_1 * 25)
+#define SEC_1                           (mSEC_1 * 1000)
+
+#define VERSATILE_CSR_BASE             0x10000000
+#define VERSATILE_CSR_SIZE             0x10000000
+
+#ifdef CONFIG_MACH_VERSATILE_AB
+/*
+ * IB2 Versatile/AB expansion board definitions
+ */
+#define VERSATILE_IB2_CAMERA_BANK	VERSATILE_IB2_BASE
+#define VERSATILE_IB2_KBD_DATAREG	(VERSATILE_IB2_BASE + 0x01000000)
+
+/* VICINTSOURCE27 */
+#define VERSATILE_IB2_INT_BASE		(VERSATILE_IB2_BASE + 0x02000000)
+#define VERSATILE_IB2_IER		(VERSATILE_IB2_INT_BASE + 0)
+#define VERSATILE_IB2_ISR		(VERSATILE_IB2_INT_BASE + 4)
+
+#define VERSATILE_IB2_CTL_BASE		(VERSATILE_IB2_BASE + 0x03000000)
+#define VERSATILE_IB2_CTRL		(VERSATILE_IB2_CTL_BASE + 0)
+#define VERSATILE_IB2_STAT		(VERSATILE_IB2_CTL_BASE + 4)
+#endif
+
+#endif
+
+/* 	END */
diff --git a/arch/arm/mach-versatile/include/mach/system.h b/arch/arm/mach-versatile/include/mach/system.h
new file mode 100644
index 000000000000..91fa559c7cca
--- /dev/null
+++ b/arch/arm/mach-versatile/include/mach/system.h
@@ -0,0 +1,49 @@
+/*
+ *  arch/arm/mach-versatile/include/mach/system.h
+ *
+ *  Copyright (C) 2003 ARM Limited
+ *  Copyright (C) 2000 Deep Blue Solutions Ltd
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#ifndef __ASM_ARCH_SYSTEM_H
+#define __ASM_ARCH_SYSTEM_H
+
+#include <mach/hardware.h>
+#include <asm/io.h>
+#include <mach/platform.h>
+
+static inline void arch_idle(void)
+{
+	/*
+	 * This should do all the clock switching
+	 * and wait for interrupt tricks
+	 */
+	cpu_do_idle();
+}
+
+static inline void arch_reset(char mode)
+{
+	u32 val;
+
+	val = __raw_readl(IO_ADDRESS(VERSATILE_SYS_RESETCTL)) & ~0x7;
+	val |= 0x105;
+
+	__raw_writel(0xa05f, IO_ADDRESS(VERSATILE_SYS_LOCK));
+	__raw_writel(val, IO_ADDRESS(VERSATILE_SYS_RESETCTL));
+	__raw_writel(0, IO_ADDRESS(VERSATILE_SYS_LOCK));
+}
+
+#endif
diff --git a/arch/arm/mach-versatile/include/mach/timex.h b/arch/arm/mach-versatile/include/mach/timex.h
new file mode 100644
index 000000000000..426199b1add5
--- /dev/null
+++ b/arch/arm/mach-versatile/include/mach/timex.h
@@ -0,0 +1,23 @@
+/*
+ *  arch/arm/mach-versatile/include/mach/timex.h
+ *
+ *  Versatile architecture timex specifications
+ *
+ *  Copyright (C) 2003 ARM Limited
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#define CLOCK_TICK_RATE		(50000000 / 16)
diff --git a/arch/arm/mach-versatile/include/mach/uncompress.h b/arch/arm/mach-versatile/include/mach/uncompress.h
new file mode 100644
index 000000000000..3dd0048afb34
--- /dev/null
+++ b/arch/arm/mach-versatile/include/mach/uncompress.h
@@ -0,0 +1,46 @@
+/*
+ *  arch/arm/mach-versatile/include/mach/uncompress.h
+ *
+ *  Copyright (C) 2003 ARM Limited
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#define AMBA_UART_DR	(*(volatile unsigned char *)0x101F1000)
+#define AMBA_UART_LCRH	(*(volatile unsigned char *)0x101F102C)
+#define AMBA_UART_CR	(*(volatile unsigned char *)0x101F1030)
+#define AMBA_UART_FR	(*(volatile unsigned char *)0x101F1018)
+
+/*
+ * This does not append a newline
+ */
+static inline void putc(int c)
+{
+	while (AMBA_UART_FR & (1 << 5))
+		barrier();
+
+	AMBA_UART_DR = c;
+}
+
+static inline void flush(void)
+{
+	while (AMBA_UART_FR & (1 << 3))
+		barrier();
+}
+
+/*
+ * nothing to do
+ */
+#define arch_decomp_setup()
+#define arch_decomp_wdog()
diff --git a/arch/arm/mach-versatile/include/mach/vmalloc.h b/arch/arm/mach-versatile/include/mach/vmalloc.h
new file mode 100644
index 000000000000..427e3612db5d
--- /dev/null
+++ b/arch/arm/mach-versatile/include/mach/vmalloc.h
@@ -0,0 +1,21 @@
+/*
+ *  arch/arm/mach-versatile/include/mach/vmalloc.h
+ *
+ *  Copyright (C) 2003 ARM Limited
+ *  Copyright (C) 2000 Russell King.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#define VMALLOC_END		(PAGE_OFFSET + 0x18000000)
diff --git a/arch/arm/mach-versatile/pci.c b/arch/arm/mach-versatile/pci.c
index ca8290159432..36f23f896503 100644
--- a/arch/arm/mach-versatile/pci.c
+++ b/arch/arm/mach-versatile/pci.c
@@ -22,7 +22,7 @@
 #include <linux/spinlock.h>
 #include <linux/init.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 #include <asm/irq.h>
 #include <asm/system.h>
diff --git a/arch/arm/mach-versatile/versatile_ab.c b/arch/arm/mach-versatile/versatile_ab.c
index b257ef78ef45..76375c64413a 100644
--- a/arch/arm/mach-versatile/versatile_ab.c
+++ b/arch/arm/mach-versatile/versatile_ab.c
@@ -24,7 +24,7 @@
 #include <linux/sysdev.h>
 #include <linux/amba/bus.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 #include <asm/irq.h>
 #include <asm/mach-types.h>
diff --git a/arch/arm/mach-versatile/versatile_pb.c b/arch/arm/mach-versatile/versatile_pb.c
index be439bb9d450..1725f019fc85 100644
--- a/arch/arm/mach-versatile/versatile_pb.c
+++ b/arch/arm/mach-versatile/versatile_pb.c
@@ -24,7 +24,7 @@
 #include <linux/sysdev.h>
 #include <linux/amba/bus.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 #include <asm/irq.h>
 #include <asm/mach-types.h>
diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig
index 3a6c8ec34cd9..ed15f876c725 100644
--- a/arch/arm/mm/Kconfig
+++ b/arch/arm/mm/Kconfig
@@ -187,7 +187,7 @@ config CPU_ARM926T
 		ARCH_AT91SAM9260 || ARCH_AT91SAM9261 || \
 		ARCH_AT91SAM9263 || ARCH_AT91SAM9RL || \
 		ARCH_AT91SAM9G20 || ARCH_AT91CAP9 || \
-		ARCH_NS9XXX || ARCH_DAVINCI
+		ARCH_NS9XXX || ARCH_DAVINCI || ARCH_MX2
 	default y if ARCH_VERSATILE_PB || MACH_VERSATILE_AB || \
 		ARCH_OMAP730 || ARCH_OMAP16XX || \
 		ARCH_PNX4008 || ARCH_NETX || CPU_S3C2412 || \
@@ -742,3 +742,11 @@ config CACHE_L2X0
 	select OUTER_CACHE
 	help
 	  This option enables the L2x0 PrimeCell.
+
+config CACHE_XSC3L2
+	bool "Enable the L2 cache on XScale3"
+	depends on CPU_XSC3
+	default y
+	select OUTER_CACHE
+	help
+	  This option enables the L2 cache on XScale3.
diff --git a/arch/arm/mm/cache-feroceon-l2.c b/arch/arm/mm/cache-feroceon-l2.c
index 20eec4ba173f..7b5a25d81576 100644
--- a/arch/arm/mm/cache-feroceon-l2.c
+++ b/arch/arm/mm/cache-feroceon-l2.c
@@ -14,7 +14,7 @@
 
 #include <linux/init.h>
 #include <asm/cacheflush.h>
-#include <asm/plat-orion/cache-feroceon-l2.h>
+#include <plat/cache-feroceon-l2.h>
 
 
 /*
diff --git a/arch/arm/mm/cache-v3.S b/arch/arm/mm/cache-v3.S
index e1994788cf0e..3b3639eb7ca5 100644
--- a/arch/arm/mm/cache-v3.S
+++ b/arch/arm/mm/cache-v3.S
@@ -9,7 +9,7 @@
  */
 #include <linux/linkage.h>
 #include <linux/init.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/page.h>
 #include "proc-macros.S"
 
diff --git a/arch/arm/mm/cache-v4.S b/arch/arm/mm/cache-v4.S
index b2908063ed6a..33926c9fcda6 100644
--- a/arch/arm/mm/cache-v4.S
+++ b/arch/arm/mm/cache-v4.S
@@ -9,7 +9,7 @@
  */
 #include <linux/linkage.h>
 #include <linux/init.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/page.h>
 #include "proc-macros.S"
 
diff --git a/arch/arm/mm/cache-v4wt.S b/arch/arm/mm/cache-v4wt.S
index 9bcabd86c6f3..51a9b0b273b6 100644
--- a/arch/arm/mm/cache-v4wt.S
+++ b/arch/arm/mm/cache-v4wt.S
@@ -13,7 +13,7 @@
  */
 #include <linux/linkage.h>
 #include <linux/init.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/page.h>
 #include "proc-macros.S"
 
diff --git a/arch/arm/mm/cache-xsc3l2.c b/arch/arm/mm/cache-xsc3l2.c
new file mode 100644
index 000000000000..158bd96763d3
--- /dev/null
+++ b/arch/arm/mm/cache-xsc3l2.c
@@ -0,0 +1,182 @@
+/*
+ * arch/arm/mm/cache-xsc3l2.c - XScale3 L2 cache controller support
+ *
+ * Copyright (C) 2007 ARM Limited
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+#include <linux/init.h>
+#include <linux/spinlock.h>
+
+#include <asm/system.h>
+#include <asm/cacheflush.h>
+#include <asm/io.h>
+
+#define CR_L2	(1 << 26)
+
+#define CACHE_LINE_SIZE		32
+#define CACHE_LINE_SHIFT	5
+#define CACHE_WAY_PER_SET	8
+
+#define CACHE_WAY_SIZE(l2ctype)	(8192 << (((l2ctype) >> 8) & 0xf))
+#define CACHE_SET_SIZE(l2ctype)	(CACHE_WAY_SIZE(l2ctype) >> CACHE_LINE_SHIFT)
+
+static inline int xsc3_l2_present(void)
+{
+	unsigned long l2ctype;
+
+	__asm__("mrc p15, 1, %0, c0, c0, 1" : "=r" (l2ctype));
+
+	return !!(l2ctype & 0xf8);
+}
+
+static inline void xsc3_l2_clean_mva(unsigned long addr)
+{
+	__asm__("mcr p15, 1, %0, c7, c11, 1" : : "r" (addr));
+}
+
+static inline void xsc3_l2_clean_pa(unsigned long addr)
+{
+	xsc3_l2_clean_mva(__phys_to_virt(addr));
+}
+
+static inline void xsc3_l2_inv_mva(unsigned long addr)
+{
+	__asm__("mcr p15, 1, %0, c7, c7, 1" : : "r" (addr));
+}
+
+static inline void xsc3_l2_inv_pa(unsigned long addr)
+{
+	xsc3_l2_inv_mva(__phys_to_virt(addr));
+}
+
+static inline void xsc3_l2_inv_all(void)
+{
+	unsigned long l2ctype, set_way;
+	int set, way;
+
+	__asm__("mrc p15, 1, %0, c0, c0, 1" : "=r" (l2ctype));
+
+	for (set = 0; set < CACHE_SET_SIZE(l2ctype); set++) {
+		for (way = 0; way < CACHE_WAY_PER_SET; way++) {
+			set_way = (way << 29) | (set << 5);
+			__asm__("mcr p15, 1, %0, c7, c11, 2" : : "r"(set_way));
+		}
+	}
+
+	dsb();
+}
+
+static void xsc3_l2_inv_range(unsigned long start, unsigned long end)
+{
+	if (start == 0 && end == -1ul) {
+		xsc3_l2_inv_all();
+		return;
+	}
+
+	/*
+	 * Clean and invalidate partial first cache line.
+	 */
+	if (start & (CACHE_LINE_SIZE - 1)) {
+		xsc3_l2_clean_pa(start & ~(CACHE_LINE_SIZE - 1));
+		xsc3_l2_inv_pa(start & ~(CACHE_LINE_SIZE - 1));
+		start = (start | (CACHE_LINE_SIZE - 1)) + 1;
+	}
+
+	/*
+	 * Clean and invalidate partial last cache line.
+	 */
+	if (end & (CACHE_LINE_SIZE - 1)) {
+		xsc3_l2_clean_pa(end & ~(CACHE_LINE_SIZE - 1));
+		xsc3_l2_inv_pa(end & ~(CACHE_LINE_SIZE - 1));
+		end &= ~(CACHE_LINE_SIZE - 1);
+	}
+
+	/*
+	 * Invalidate all full cache lines between 'start' and 'end'.
+	 */
+	while (start != end) {
+		xsc3_l2_inv_pa(start);
+		start += CACHE_LINE_SIZE;
+	}
+
+	dsb();
+}
+
+static void xsc3_l2_clean_range(unsigned long start, unsigned long end)
+{
+	start &= ~(CACHE_LINE_SIZE - 1);
+	while (start < end) {
+		xsc3_l2_clean_pa(start);
+		start += CACHE_LINE_SIZE;
+	}
+
+	dsb();
+}
+
+/*
+ * optimize L2 flush all operation by set/way format
+ */
+static inline void xsc3_l2_flush_all(void)
+{
+	unsigned long l2ctype, set_way;
+	int set, way;
+
+	__asm__("mrc p15, 1, %0, c0, c0, 1" : "=r" (l2ctype));
+
+	for (set = 0; set < CACHE_SET_SIZE(l2ctype); set++) {
+		for (way = 0; way < CACHE_WAY_PER_SET; way++) {
+			set_way = (way << 29) | (set << 5);
+			__asm__("mcr p15, 1, %0, c7, c15, 2" : : "r"(set_way));
+		}
+	}
+
+	dsb();
+}
+
+static void xsc3_l2_flush_range(unsigned long start, unsigned long end)
+{
+	if (start == 0 && end == -1ul) {
+		xsc3_l2_flush_all();
+		return;
+	}
+
+	start &= ~(CACHE_LINE_SIZE - 1);
+	while (start < end) {
+		xsc3_l2_clean_pa(start);
+		xsc3_l2_inv_pa(start);
+		start += CACHE_LINE_SIZE;
+	}
+
+	dsb();
+}
+
+static int __init xsc3_l2_init(void)
+{
+	if (!cpu_is_xsc3() || !xsc3_l2_present())
+		return 0;
+
+	if (!(get_cr() & CR_L2)) {
+		pr_info("XScale3 L2 cache enabled.\n");
+		adjust_cr(CR_L2, CR_L2);
+		xsc3_l2_inv_all();
+	}
+
+	outer_cache.inv_range = xsc3_l2_inv_range;
+	outer_cache.clean_range = xsc3_l2_clean_range;
+	outer_cache.flush_range = xsc3_l2_flush_range;
+
+	return 0;
+}
+core_initcall(xsc3_l2_init);
diff --git a/arch/arm/mm/consistent.c b/arch/arm/mm/consistent.c
index 333a82a3717e..db7b3e38ef1d 100644
--- a/arch/arm/mm/consistent.c
+++ b/arch/arm/mm/consistent.c
@@ -274,6 +274,11 @@ __dma_alloc(struct device *dev, size_t size, dma_addr_t *handle, gfp_t gfp,
 void *
 dma_alloc_coherent(struct device *dev, size_t size, dma_addr_t *handle, gfp_t gfp)
 {
+	void *memory;
+
+	if (dma_alloc_from_coherent(dev, size, handle, &memory))
+		return memory;
+
 	if (arch_is_coherent()) {
 		void *virt;
 
@@ -362,6 +367,9 @@ void dma_free_coherent(struct device *dev, size_t size, void *cpu_addr, dma_addr
 
 	WARN_ON(irqs_disabled());
 
+	if (dma_release_from_coherent(dev, get_order(size), cpu_addr))
+		return;
+
 	if (arch_is_coherent()) {
 		kfree(cpu_addr);
 		return;
diff --git a/arch/arm/mm/fault-armv.c b/arch/arm/mm/fault-armv.c
index fbfa26058442..a8ec97b4752e 100644
--- a/arch/arm/mm/fault-armv.c
+++ b/arch/arm/mm/fault-armv.c
@@ -37,7 +37,7 @@ static int adjust_pte(struct vm_area_struct *vma, unsigned long address)
 	pgd_t *pgd;
 	pmd_t *pmd;
 	pte_t *pte, entry;
-	int ret = 0;
+	int ret;
 
 	pgd = pgd_offset(vma->vm_mm, address);
 	if (pgd_none(*pgd))
@@ -55,15 +55,19 @@ static int adjust_pte(struct vm_area_struct *vma, unsigned long address)
 	entry = *pte;
 
 	/*
+	 * If this page is present, it's actually being shared.
+	 */
+	ret = pte_present(entry);
+
+	/*
 	 * If this page isn't present, or is already setup to
 	 * fault (ie, is old), we can safely ignore any issues.
 	 */
-	if (pte_present(entry) && pte_val(entry) & shared_pte_mask) {
+	if (ret && pte_val(entry) & shared_pte_mask) {
 		flush_cache_page(vma, address, pte_pfn(entry));
 		pte_val(entry) &= ~shared_pte_mask;
 		set_pte_at(vma->vm_mm, address, pte, entry);
 		flush_tlb_page(vma, address);
-		ret = 1;
 	}
 	pte_unmap(pte);
 	return ret;
diff --git a/arch/arm/mm/init.c b/arch/arm/mm/init.c
index e6352946dde0..30a69d67d673 100644
--- a/arch/arm/mm/init.c
+++ b/arch/arm/mm/init.c
@@ -156,9 +156,9 @@ static int __init check_initrd(struct meminfo *mi)
 	}
 
 	if (initrd_node == -1) {
-		printk(KERN_ERR "initrd (0x%08lx - 0x%08lx) extends beyond "
+		printk(KERN_ERR "INITRD: 0x%08lx+0x%08lx extends beyond "
 		       "physical memory - disabling initrd\n",
-		       phys_initrd_start, end);
+		       phys_initrd_start, phys_initrd_size);
 		phys_initrd_start = phys_initrd_size = 0;
 	}
 #endif
@@ -239,25 +239,33 @@ bootmem_init_node(int node, int initrd_node, struct meminfo *mi)
 	reserve_bootmem_node(pgdat, boot_pfn << PAGE_SHIFT,
 			     boot_pages << PAGE_SHIFT, BOOTMEM_DEFAULT);
 
+	/*
+	 * Reserve any special node zero regions.
+	 */
+	if (node == 0)
+		reserve_node_zero(pgdat);
+
 #ifdef CONFIG_BLK_DEV_INITRD
 	/*
 	 * If the initrd is in this node, reserve its memory.
 	 */
 	if (node == initrd_node) {
-		reserve_bootmem_node(pgdat, phys_initrd_start,
-				     phys_initrd_size, BOOTMEM_DEFAULT);
-		initrd_start = __phys_to_virt(phys_initrd_start);
-		initrd_end = initrd_start + phys_initrd_size;
+		int res = reserve_bootmem_node(pgdat, phys_initrd_start,
+				     phys_initrd_size, BOOTMEM_EXCLUSIVE);
+
+		if (res == 0) {
+			initrd_start = __phys_to_virt(phys_initrd_start);
+			initrd_end = initrd_start + phys_initrd_size;
+		} else {
+			printk(KERN_ERR
+				"INITRD: 0x%08lx+0x%08lx overlaps in-use "
+				"memory region - disabling initrd\n",
+				phys_initrd_start, phys_initrd_size);
+		}
 	}
 #endif
 
 	/*
-	 * Finally, reserve any node zero regions.
-	 */
-	if (node == 0)
-		reserve_node_zero(pgdat);
-
-	/*
 	 * initialise the zones within this node.
 	 */
 	memset(zone_size, 0, sizeof(zone_size));
diff --git a/arch/arm/mm/ioremap.c b/arch/arm/mm/ioremap.c
index 303a7ff6bfd2..b81dbf9ffb77 100644
--- a/arch/arm/mm/ioremap.c
+++ b/arch/arm/mm/ioremap.c
@@ -259,7 +259,7 @@ remap_area_supersections(unsigned long virt, unsigned long pfn,
  * caller shouldn't need to know that small detail.
  *
  * 'flags' are the extra L_PTE_ flags that you want to specify for this
- * mapping.  See include/asm-arm/proc-armv/pgtable.h for more information.
+ * mapping.  See <asm/pgtable.h> for more information.
  */
 void __iomem *
 __arm_ioremap_pfn(unsigned long pfn, unsigned long offset, size_t size,
diff --git a/arch/arm/mm/mmu.c b/arch/arm/mm/mmu.c
index 2d6d682c206a..25d9a11eb617 100644
--- a/arch/arm/mm/mmu.c
+++ b/arch/arm/mm/mmu.c
@@ -568,6 +568,55 @@ void __init iotable_init(struct map_desc *io_desc, int nr)
 		create_mapping(io_desc + i);
 }
 
+static int __init check_membank_valid(struct membank *mb)
+{
+	/*
+	 * Check whether this memory region has non-zero size.
+	 */
+	if (mb->size == 0)
+		return 0;
+
+	/*
+	 * Check whether this memory region would entirely overlap
+	 * the vmalloc area.
+	 */
+	if (phys_to_virt(mb->start) >= VMALLOC_MIN) {
+		printk(KERN_NOTICE "Ignoring RAM at %.8lx-%.8lx "
+			"(vmalloc region overlap).\n",
+			mb->start, mb->start + mb->size - 1);
+		return 0;
+	}
+
+	/*
+	 * Check whether this memory region would partially overlap
+	 * the vmalloc area.
+	 */
+	if (phys_to_virt(mb->start + mb->size) < phys_to_virt(mb->start) ||
+	    phys_to_virt(mb->start + mb->size) > VMALLOC_MIN) {
+		unsigned long newsize = VMALLOC_MIN - phys_to_virt(mb->start);
+
+		printk(KERN_NOTICE "Truncating RAM at %.8lx-%.8lx "
+			"to -%.8lx (vmalloc region overlap).\n",
+			mb->start, mb->start + mb->size - 1,
+			mb->start + newsize - 1);
+		mb->size = newsize;
+	}
+
+	return 1;
+}
+
+static void __init sanity_check_meminfo(struct meminfo *mi)
+{
+	int i;
+	int j;
+
+	for (i = 0, j = 0; i < mi->nr_banks; i++) {
+		if (check_membank_valid(&mi->bank[i]))
+			mi->bank[j++] = mi->bank[i];
+	}
+	mi->nr_banks = j;
+}
+
 static inline void prepare_page_table(struct meminfo *mi)
 {
 	unsigned long addr;
@@ -753,6 +802,7 @@ void __init paging_init(struct meminfo *mi, struct machine_desc *mdesc)
 	void *zero_page;
 
 	build_mem_type_table();
+	sanity_check_meminfo(mi);
 	prepare_page_table(mi);
 	bootmem_init(mi);
 	devicemaps_init(mdesc);
diff --git a/arch/arm/mm/proc-arm720.S b/arch/arm/mm/proc-arm720.S
index d64f8e6f75ab..eda733d30455 100644
--- a/arch/arm/mm/proc-arm720.S
+++ b/arch/arm/mm/proc-arm720.S
@@ -231,7 +231,7 @@ cpu_arm720_name:
 		.align
 
 /*
- * See linux/include/asm-arm/procinfo.h for a definition of this structure.
+ * See <asm/procinfo.h> for a definition of this structure.
  */
 	
 		.section ".proc.info.init", #alloc, #execinstr
diff --git a/arch/arm/mm/proc-arm940.S b/arch/arm/mm/proc-arm940.S
index 1a3d63df8e90..551244d5ca19 100644
--- a/arch/arm/mm/proc-arm940.S
+++ b/arch/arm/mm/proc-arm940.S
@@ -15,6 +15,7 @@
 #include <asm/pgtable-hwdef.h>
 #include <asm/pgtable.h>
 #include <asm/ptrace.h>
+#include "proc-macros.S"
 
 /* ARM940T has a 4KB DCache comprising 256 lines of 4 words */
 #define CACHE_DLINESIZE	16
diff --git a/arch/arm/mm/proc-arm946.S b/arch/arm/mm/proc-arm946.S
index 82d579ac9b98..6168c6160dee 100644
--- a/arch/arm/mm/proc-arm946.S
+++ b/arch/arm/mm/proc-arm946.S
@@ -17,6 +17,7 @@
 #include <asm/pgtable-hwdef.h>
 #include <asm/pgtable.h>
 #include <asm/ptrace.h>
+#include "proc-macros.S"
 
 /*
  * ARM946E-S is synthesizable to have 0KB to 1MB sized D-Cache,
diff --git a/arch/arm/mm/proc-sa110.S b/arch/arm/mm/proc-sa110.S
index 9818195dbf11..bbe10576c861 100644
--- a/arch/arm/mm/proc-sa110.S
+++ b/arch/arm/mm/proc-sa110.S
@@ -18,7 +18,7 @@
 #include <asm/assembler.h>
 #include <asm/asm-offsets.h>
 #include <asm/elf.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/pgtable-hwdef.h>
 #include <asm/pgtable.h>
 #include <asm/ptrace.h>
diff --git a/arch/arm/mm/proc-sa1100.S b/arch/arm/mm/proc-sa1100.S
index c5fe27ad2892..871ba018252e 100644
--- a/arch/arm/mm/proc-sa1100.S
+++ b/arch/arm/mm/proc-sa1100.S
@@ -23,7 +23,7 @@
 #include <asm/assembler.h>
 #include <asm/asm-offsets.h>
 #include <asm/elf.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/pgtable-hwdef.h>
 #include <asm/pgtable.h>
 
diff --git a/arch/arm/mm/proc-xsc3.S b/arch/arm/mm/proc-xsc3.S
index 3533741a76f6..7bd9e7197f60 100644
--- a/arch/arm/mm/proc-xsc3.S
+++ b/arch/arm/mm/proc-xsc3.S
@@ -28,7 +28,7 @@
 #include <linux/init.h>
 #include <asm/assembler.h>
 #include <asm/elf.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/pgtable.h>
 #include <asm/pgtable-hwdef.h>
 #include <asm/page.h>
@@ -52,11 +52,6 @@
 #define CACHESIZE	32768
 
 /*
- * Run with L2 enabled.
- */
-#define L2_CACHE_ENABLE	1
-
-/*
  * This macro is used to wait for a CP15 write and is needed when we
  * have to ensure that the last operation to the coprocessor was
  * completed before continuing with operation.
@@ -265,12 +260,9 @@ ENTRY(xsc3_dma_inv_range)
 	tst	r0, #CACHELINESIZE - 1
 	bic	r0, r0, #CACHELINESIZE - 1
 	mcrne	p15, 0, r0, c7, c10, 1		@ clean L1 D line
-	mcrne	p15, 1, r0, c7, c11, 1		@ clean L2 line
 	tst	r1, #CACHELINESIZE - 1
 	mcrne	p15, 0, r1, c7, c10, 1		@ clean L1 D line
-	mcrne	p15, 1, r1, c7, c11, 1		@ clean L2 line
 1:	mcr	p15, 0, r0, c7, c6, 1		@ invalidate L1 D line
-	mcr	p15, 1, r0, c7, c7, 1		@ invalidate L2 line
 	add	r0, r0, #CACHELINESIZE
 	cmp	r0, r1
 	blo	1b
@@ -288,7 +280,6 @@ ENTRY(xsc3_dma_inv_range)
 ENTRY(xsc3_dma_clean_range)
 	bic	r0, r0, #CACHELINESIZE - 1
 1:	mcr	p15, 0, r0, c7, c10, 1		@ clean L1 D line
-	mcr	p15, 1, r0, c7, c11, 1		@ clean L2 line
 	add	r0, r0, #CACHELINESIZE
 	cmp	r0, r1
 	blo	1b
@@ -306,8 +297,6 @@ ENTRY(xsc3_dma_clean_range)
 ENTRY(xsc3_dma_flush_range)
 	bic	r0, r0, #CACHELINESIZE - 1
 1:	mcr	p15, 0, r0, c7, c14, 1		@ clean/invalidate L1 D line
-	mcr	p15, 1, r0, c7, c11, 1		@ clean L2 line
-	mcr	p15, 1, r0, c7, c7, 1		@ invalidate L2 line
 	add	r0, r0, #CACHELINESIZE
 	cmp	r0, r1
 	blo	1b
@@ -347,9 +336,7 @@ ENTRY(cpu_xsc3_switch_mm)
 	mcr	p15, 0, ip, c7, c5, 0		@ invalidate L1 I cache and BTB
 	mcr	p15, 0, ip, c7, c10, 4		@ data write barrier
 	mcr	p15, 0, ip, c7, c5, 4		@ prefetch flush
-#ifdef L2_CACHE_ENABLE
 	orr	r0, r0, #0x18			@ cache the page table in L2
-#endif
 	mcr	p15, 0, r0, c2, c0, 0		@ load page table pointer
 	mcr	p15, 0, ip, c8, c7, 0		@ invalidate I and D TLBs
 	cpwait_ret lr, ip
@@ -378,12 +365,10 @@ ENTRY(cpu_xsc3_set_pte_ext)
 	orreq	r2, r2, #PTE_EXT_AP_UNO_SRW	@ yes -> user n/a, system r/w
 						@ combined with user -> user r/w
 
-#if L2_CACHE_ENABLE
 	@ If it's cacheable, it needs to be in L2 also.
 	eor	ip, r1, #L_PTE_CACHEABLE
 	tst	ip, #L_PTE_CACHEABLE
 	orreq	r2, r2, #PTE_EXT_TEX(0x5)
-#endif
 
 	tst	r3, #L_PTE_PRESENT | L_PTE_YOUNG	@ present and young?
 	movne	r2, #0				@ no -> fault
@@ -408,9 +393,7 @@ __xsc3_setup:
 	mcr	p15, 0, ip, c7, c10, 4		@ data write barrier
 	mcr	p15, 0, ip, c7, c5, 4		@ prefetch flush
 	mcr	p15, 0, ip, c8, c7, 0		@ invalidate I and D TLBs
-#if L2_CACHE_ENABLE
 	orr	r4, r4, #0x18			@ cache the page table in L2
-#endif
 	mcr	p15, 0, r4, c2, c0, 0		@ load page table pointer
 
 	mov	r0, #0				@ don't allow CP access
@@ -418,9 +401,7 @@ __xsc3_setup:
 
 	mrc	p15, 0, r0, c1, c0, 1		@ get auxiliary control reg
 	and	r0, r0, #2			@ preserve bit P bit setting
-#if L2_CACHE_ENABLE
 	orr	r0, r0, #(1 << 10)		@ enable L2 for LLR cache
-#endif
 	mcr	p15, 0, r0, c1, c0, 1		@ set auxiliary control reg
 
 	adr	r5, xsc3_crval
@@ -429,9 +410,6 @@ __xsc3_setup:
 	bic	r0, r0, r5			@ ..V. ..R. .... ..A.
 	orr	r0, r0, r6			@ ..VI Z..S .... .C.M (mmu)
 						@ ...I Z..S .... .... (uc)
-#if L2_CACHE_ENABLE
-	orr 	r0, r0, #0x04000000		@ L2 enable
-#endif
 	mov	pc, lr
 
 	.size	__xsc3_setup, . - __xsc3_setup
diff --git a/arch/arm/nwfpe/fpa11.h b/arch/arm/nwfpe/fpa11.h
index 4a4d02c09112..386cbd13eaf4 100644
--- a/arch/arm/nwfpe/fpa11.h
+++ b/arch/arm/nwfpe/fpa11.h
@@ -69,7 +69,7 @@ typedef union tagFPREG {
  * This structure is exported to user space.  Do not re-order.
  * Only add new stuff to the end, and do not change the size of
  * any element.  Elements of this structure are used by user
- * space, and must match struct user_fp in include/asm-arm/user.h.
+ * space, and must match struct user_fp in <asm/user.h>.
  * We include the byte offsets below for documentation purposes.
  *
  * The size of this structure and FPREG are checked by fpmodule.c
diff --git a/arch/arm/oprofile/op_model_mpcore.c b/arch/arm/oprofile/op_model_mpcore.c
index 4458705021e0..92db6e035c65 100644
--- a/arch/arm/oprofile/op_model_mpcore.c
+++ b/arch/arm/oprofile/op_model_mpcore.c
@@ -40,7 +40,7 @@
 #include <asm/io.h>
 #include <asm/irq.h>
 #include <asm/mach/irq.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/system.h>
 
 #include "op_counter.h"
diff --git a/arch/arm/plat-iop/adma.c b/arch/arm/plat-iop/adma.c
index 53c5e9a52eb1..f72420821619 100644
--- a/arch/arm/plat-iop/adma.c
+++ b/arch/arm/plat-iop/adma.c
@@ -19,7 +19,7 @@
 #include <linux/platform_device.h>
 #include <asm/hardware/iop3xx.h>
 #include <linux/dma-mapping.h>
-#include <asm/arch/adma.h>
+#include <mach/adma.h>
 #include <asm/hardware/iop_adma.h>
 
 #ifdef CONFIG_ARCH_IOP32X
diff --git a/arch/arm/plat-iop/i2c.c b/arch/arm/plat-iop/i2c.c
index e99909bdba71..6dcbcc4ad419 100644
--- a/arch/arm/plat-iop/i2c.c
+++ b/arch/arm/plat-iop/i2c.c
@@ -25,9 +25,8 @@
 #include <asm/setup.h>
 #include <asm/system.h>
 #include <asm/memory.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/hardware/iop3xx.h>
-#include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 
 #ifdef CONFIG_ARCH_IOP32X
diff --git a/arch/arm/plat-iop/io.c b/arch/arm/plat-iop/io.c
index 498675d028d0..39dcfb4bdc71 100644
--- a/arch/arm/plat-iop/io.c
+++ b/arch/arm/plat-iop/io.c
@@ -18,7 +18,7 @@
  */
 #include <linux/kernel.h>
 #include <linux/module.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 
 void * __iomem __iop3xx_ioremap(unsigned long cookie, size_t size,
diff --git a/arch/arm/plat-iop/pci.c b/arch/arm/plat-iop/pci.c
index d9bc15a69e5d..54708bf9cb15 100644
--- a/arch/arm/plat-iop/pci.c
+++ b/arch/arm/plat-iop/pci.c
@@ -21,10 +21,9 @@
 #include <asm/irq.h>
 #include <asm/signal.h>
 #include <asm/system.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/mach/pci.h>
 #include <asm/hardware/iop3xx.h>
-#include <asm/mach-types.h>
 
 // #define DEBUG
 
diff --git a/arch/arm/plat-iop/time.c b/arch/arm/plat-iop/time.c
index 6fe481ff4fdf..c53fefb6aac4 100644
--- a/arch/arm/plat-iop/time.c
+++ b/arch/arm/plat-iop/time.c
@@ -18,13 +18,13 @@
 #include <linux/time.h>
 #include <linux/init.h>
 #include <linux/timex.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 #include <asm/irq.h>
 #include <asm/uaccess.h>
 #include <asm/mach/irq.h>
 #include <asm/mach/time.h>
-#include <asm/arch/time.h>
+#include <mach/time.h>
 
 static unsigned long ticks_per_jiffy;
 static unsigned long ticks_per_usec;
diff --git a/arch/arm/plat-mxc/clock.c b/arch/arm/plat-mxc/clock.c
index 1aa86fd60d71..2f8627218839 100644
--- a/arch/arm/plat-mxc/clock.c
+++ b/arch/arm/plat-mxc/clock.c
@@ -39,7 +39,7 @@
 #include <linux/string.h>
 #include <linux/version.h>
 
-#include <asm/arch/clock.h>
+#include <mach/clock.h>
 
 static LIST_HEAD(clocks);
 static DEFINE_MUTEX(clocks_mutex);
diff --git a/arch/arm/plat-mxc/gpio.c b/arch/arm/plat-mxc/gpio.c
index 4a7736717d86..733e0acac916 100644
--- a/arch/arm/plat-mxc/gpio.c
+++ b/arch/arm/plat-mxc/gpio.c
@@ -23,7 +23,7 @@
 #include <linux/io.h>
 #include <linux/irq.h>
 #include <linux/gpio.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm-generic/bug.h>
 
 static struct mxc_gpio_port *mxc_gpio_ports;
@@ -73,19 +73,19 @@ static int gpio_set_irq_type(u32 irq, u32 type)
 	void __iomem *reg = port->base;
 
 	switch (type) {
-	case IRQT_RISING:
+	case IRQ_TYPE_EDGE_RISING:
 		edge = GPIO_INT_RISE_EDGE;
 		break;
-	case IRQT_FALLING:
+	case IRQ_TYPE_EDGE_FALLING:
 		edge = GPIO_INT_FALL_EDGE;
 		break;
-	case IRQT_LOW:
+	case IRQ_TYPE_LEVEL_LOW:
 		edge = GPIO_INT_LOW_LEV;
 		break;
-	case IRQT_HIGH:
+	case IRQ_TYPE_LEVEL_HIGH:
 		edge = GPIO_INT_HIGH_LEV;
 		break;
-	default:	/* this includes IRQT_BOTHEDGE */
+	default:	/* this includes IRQ_TYPE_EDGE_BOTH */
 		return -EINVAL;
 	}
 
diff --git a/include/asm-arm/arch-mxc/board-mx27ads.h b/arch/arm/plat-mxc/include/mach/board-mx27ads.h
index 61e66dac90ef..61e66dac90ef 100644
--- a/include/asm-arm/arch-mxc/board-mx27ads.h
+++ b/arch/arm/plat-mxc/include/mach/board-mx27ads.h
diff --git a/include/asm-arm/arch-mxc/board-mx31ads.h b/arch/arm/plat-mxc/include/mach/board-mx31ads.h
index 1bc6fb0f9a83..1bc6fb0f9a83 100644
--- a/include/asm-arm/arch-mxc/board-mx31ads.h
+++ b/arch/arm/plat-mxc/include/mach/board-mx31ads.h
diff --git a/include/asm-arm/arch-mxc/board-mx31lite.h b/arch/arm/plat-mxc/include/mach/board-mx31lite.h
index e4e5cf5ad7db..e4e5cf5ad7db 100644
--- a/include/asm-arm/arch-mxc/board-mx31lite.h
+++ b/arch/arm/plat-mxc/include/mach/board-mx31lite.h
diff --git a/include/asm-arm/arch-mxc/board-pcm037.h b/arch/arm/plat-mxc/include/mach/board-pcm037.h
index 82232ba3c8fc..82232ba3c8fc 100644
--- a/include/asm-arm/arch-mxc/board-pcm037.h
+++ b/arch/arm/plat-mxc/include/mach/board-pcm037.h
diff --git a/include/asm-arm/arch-mxc/board-pcm038.h b/arch/arm/plat-mxc/include/mach/board-pcm038.h
index 750c62afd90f..750c62afd90f 100644
--- a/include/asm-arm/arch-mxc/board-pcm038.h
+++ b/arch/arm/plat-mxc/include/mach/board-pcm038.h
diff --git a/include/asm-arm/arch-mxc/clock.h b/arch/arm/plat-mxc/include/mach/clock.h
index 24caa2b7c91d..24caa2b7c91d 100644
--- a/include/asm-arm/arch-mxc/clock.h
+++ b/arch/arm/plat-mxc/include/mach/clock.h
diff --git a/include/asm-arm/arch-mxc/common.h b/arch/arm/plat-mxc/include/mach/common.h
index a6d2e24aab15..a6d2e24aab15 100644
--- a/include/asm-arm/arch-mxc/common.h
+++ b/arch/arm/plat-mxc/include/mach/common.h
diff --git a/arch/arm/plat-mxc/include/mach/debug-macro.S b/arch/arm/plat-mxc/include/mach/debug-macro.S
new file mode 100644
index 000000000000..b9907bebba3b
--- /dev/null
+++ b/arch/arm/plat-mxc/include/mach/debug-macro.S
@@ -0,0 +1,49 @@
+/* arch/arm/mach-imx/include/mach/debug-macro.S
+ *
+ * Debugging macro include header
+ *
+ *  Copyright (C) 1994-1999 Russell King
+ *  Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <mach/hardware.h>
+
+#ifdef CONFIG_MACH_MX31ADS
+#include <mach/board-mx31ads.h>
+#endif
+#ifdef CONFIG_MACH_PCM037
+#include <mach/board-pcm037.h>
+#endif
+#ifdef CONFIG_MACH_MX31LITE
+#include <mach/board-mx31lite.h>
+#endif
+#ifdef CONFIG_MACH_MX27ADS
+#include <mach/board-mx27ads.h>
+#endif
+#ifdef CONFIG_MACH_PCM038
+#include <mach/board-pcm038.h>
+#endif
+		.macro	addruart,rx
+		mrc	p15, 0, \rx, c1, c0
+		tst	\rx, #1			@ MMU enabled?
+		ldreq	\rx, =MXC_LL_UART_PADDR	@ physical
+		ldrne	\rx, =MXC_LL_UART_VADDR	@ virtual
+		.endm
+
+		.macro	senduart,rd,rx
+		str	\rd, [\rx, #0x40]	@ TXDATA
+		.endm
+
+		.macro	waituart,rd,rx
+		.endm
+
+		.macro	busyuart,rd,rx
+1002:		ldr	\rd, [\rx, #0x98]	@ SR2
+		tst	\rd, #1 << 3		@ TXDC
+		beq	1002b			@ wait until transmit done
+		.endm
diff --git a/include/asm-arm/arch-mxc/dma.h b/arch/arm/plat-mxc/include/mach/dma.h
index c822d569a05e..c822d569a05e 100644
--- a/include/asm-arm/arch-mxc/dma.h
+++ b/arch/arm/plat-mxc/include/mach/dma.h
diff --git a/include/asm-arm/arch-mxc/entry-macro.S b/arch/arm/plat-mxc/include/mach/entry-macro.S
index b542433afb1b..b542433afb1b 100644
--- a/include/asm-arm/arch-mxc/entry-macro.S
+++ b/arch/arm/plat-mxc/include/mach/entry-macro.S
diff --git a/arch/arm/plat-mxc/include/mach/gpio.h b/arch/arm/plat-mxc/include/mach/gpio.h
new file mode 100644
index 000000000000..65eedc0d196f
--- /dev/null
+++ b/arch/arm/plat-mxc/include/mach/gpio.h
@@ -0,0 +1,42 @@
+/*
+ * Copyright 2007 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright 2008 Juergen Beisert, kernel@pengutronix.de
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.
+ */
+
+#ifndef __ASM_ARCH_MXC_GPIO_H__
+#define __ASM_ARCH_MXC_GPIO_H__
+
+#include <mach/hardware.h>
+#include <asm-generic/gpio.h>
+
+/* use gpiolib dispatchers */
+#define gpio_get_value		__gpio_get_value
+#define gpio_set_value		__gpio_set_value
+#define gpio_cansleep		__gpio_cansleep
+
+#define gpio_to_irq(gpio)	(MXC_MAX_INT_LINES + (gpio))
+#define irq_to_gpio(irq)	((irq) - MXC_MAX_INT_LINES)
+
+struct mxc_gpio_port {
+	void __iomem *base;
+	int irq;
+	int virtual_irq_start;
+	struct gpio_chip chip;
+};
+
+int mxc_gpio_init(struct mxc_gpio_port*, int);
+
+#endif
diff --git a/arch/arm/plat-mxc/include/mach/hardware.h b/arch/arm/plat-mxc/include/mach/hardware.h
new file mode 100644
index 000000000000..3caadeeda701
--- /dev/null
+++ b/arch/arm/plat-mxc/include/mach/hardware.h
@@ -0,0 +1,37 @@
+/*
+ * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright 2008 Juergen Beisert, kernel@pengutronix.de
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA  02110-1301, USA.
+ */
+
+#ifndef __ASM_ARCH_MXC_HARDWARE_H__
+#define __ASM_ARCH_MXC_HARDWARE_H__
+
+#include <asm/sizes.h>
+
+#ifdef CONFIG_ARCH_MX3
+# include <mach/mx31.h>
+#endif
+
+#ifdef CONFIG_ARCH_MX2
+# ifdef CONFIG_MACH_MX27
+#  include <mach/mx27.h>
+# endif
+#endif
+
+#include <mach/mxc.h>
+
+#endif /* __ASM_ARCH_MXC_HARDWARE_H__ */
diff --git a/include/asm-arm/arch-mxc/iim.h b/arch/arm/plat-mxc/include/mach/iim.h
index 315bffadafda..315bffadafda 100644
--- a/include/asm-arm/arch-mxc/iim.h
+++ b/arch/arm/plat-mxc/include/mach/iim.h
diff --git a/include/asm-arm/arch-mxc/imx-uart.h b/arch/arm/plat-mxc/include/mach/imx-uart.h
index 83fb72c4048a..83fb72c4048a 100644
--- a/include/asm-arm/arch-mxc/imx-uart.h
+++ b/arch/arm/plat-mxc/include/mach/imx-uart.h
diff --git a/include/asm-arm/arch-mxc/io.h b/arch/arm/plat-mxc/include/mach/io.h
index 65b6810124c1..65b6810124c1 100644
--- a/include/asm-arm/arch-mxc/io.h
+++ b/arch/arm/plat-mxc/include/mach/io.h
diff --git a/include/asm-arm/arch-mxc/iomux-mx1-mx2.h b/arch/arm/plat-mxc/include/mach/iomux-mx1-mx2.h
index 076d37b38eb2..076d37b38eb2 100644
--- a/include/asm-arm/arch-mxc/iomux-mx1-mx2.h
+++ b/arch/arm/plat-mxc/include/mach/iomux-mx1-mx2.h
diff --git a/include/asm-arm/arch-mxc/iomux-mx3.h b/arch/arm/plat-mxc/include/mach/iomux-mx3.h
index 7509e7692f08..7509e7692f08 100644
--- a/include/asm-arm/arch-mxc/iomux-mx3.h
+++ b/arch/arm/plat-mxc/include/mach/iomux-mx3.h
diff --git a/arch/arm/plat-mxc/include/mach/irqs.h b/arch/arm/plat-mxc/include/mach/irqs.h
new file mode 100644
index 000000000000..228c4f68ccdf
--- /dev/null
+++ b/arch/arm/plat-mxc/include/mach/irqs.h
@@ -0,0 +1,16 @@
+/*
+ *  Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved.
+ */
+
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_MXC_IRQS_H__
+#define __ASM_ARCH_MXC_IRQS_H__
+
+#include <mach/hardware.h>
+
+#endif /* __ASM_ARCH_MXC_IRQS_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/memory.h b/arch/arm/plat-mxc/include/mach/memory.h
new file mode 100644
index 000000000000..d7a8d3ebed57
--- /dev/null
+++ b/arch/arm/plat-mxc/include/mach/memory.h
@@ -0,0 +1,29 @@
+/*
+ * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved.
+ */
+
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_MXC_MEMORY_H__
+#define __ASM_ARCH_MXC_MEMORY_H__
+
+#include <mach/hardware.h>
+
+/*
+ * Virtual view <-> DMA view memory address translations
+ * This macro is used to translate the virtual address to an address
+ * suitable to be passed to set_dma_addr()
+ */
+#define __virt_to_bus(a)	__virt_to_phys(a)
+
+/*
+ * Used to convert an address for DMA operations to an address that the
+ * kernel can use.
+ */
+#define __bus_to_virt(a)	__phys_to_virt(a)
+
+#endif /* __ASM_ARCH_MXC_MEMORY_H__ */
diff --git a/include/asm-arm/arch-mxc/mx27.h b/arch/arm/plat-mxc/include/mach/mx27.h
index 212ecc246626..212ecc246626 100644
--- a/include/asm-arm/arch-mxc/mx27.h
+++ b/arch/arm/plat-mxc/include/mach/mx27.h
diff --git a/include/asm-arm/arch-mxc/mx31.h b/arch/arm/plat-mxc/include/mach/mx31.h
index a7373e4a56cb..a7373e4a56cb 100644
--- a/include/asm-arm/arch-mxc/mx31.h
+++ b/arch/arm/plat-mxc/include/mach/mx31.h
diff --git a/include/asm-arm/arch-mxc/mxc.h b/arch/arm/plat-mxc/include/mach/mxc.h
index 332eda4dbd3b..332eda4dbd3b 100644
--- a/include/asm-arm/arch-mxc/mxc.h
+++ b/arch/arm/plat-mxc/include/mach/mxc.h
diff --git a/include/asm-arm/arch-mxc/mxc_timer.h b/arch/arm/plat-mxc/include/mach/mxc_timer.h
index 6cb11f4f1a06..130aebfbe168 100644
--- a/include/asm-arm/arch-mxc/mxc_timer.h
+++ b/arch/arm/plat-mxc/include/mach/mxc_timer.h
@@ -24,7 +24,7 @@
 #define __PLAT_MXC_TIMER_H
 
 #include <linux/clk.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 
 #ifdef CONFIG_ARCH_IMX
 #define TIMER_BASE		IO_ADDRESS(TIM1_BASE_ADDR)
diff --git a/include/asm-arm/arch-mxc/system.h b/arch/arm/plat-mxc/include/mach/system.h
index bbfc37465fc5..bbfc37465fc5 100644
--- a/include/asm-arm/arch-mxc/system.h
+++ b/arch/arm/plat-mxc/include/mach/system.h
diff --git a/arch/arm/plat-mxc/include/mach/timex.h b/arch/arm/plat-mxc/include/mach/timex.h
new file mode 100644
index 000000000000..0b0af0253e91
--- /dev/null
+++ b/arch/arm/plat-mxc/include/mach/timex.h
@@ -0,0 +1,25 @@
+/*
+ *  Copyright (C) 1999 ARM Limited
+ * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#ifndef __ASM_ARCH_MXC_TIMEX_H__
+#define __ASM_ARCH_MXC_TIMEX_H__
+
+#include <mach/hardware.h>	/* for CLOCK_TICK_RATE */
+
+#endif				/* __ASM_ARCH_MXC_TIMEX_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/uncompress.h b/arch/arm/plat-mxc/include/mach/uncompress.h
new file mode 100644
index 000000000000..de6fe0365982
--- /dev/null
+++ b/arch/arm/plat-mxc/include/mach/uncompress.h
@@ -0,0 +1,78 @@
+/*
+ *  arch/arm/plat-mxc/include/mach/uncompress.h
+ *
+ *
+ *
+ *  Copyright (C) 1999 ARM Limited
+ *  Copyright (C) Shane Nay (shane@minirl.com)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#ifndef __ASM_ARCH_MXC_UNCOMPRESS_H__
+#define __ASM_ARCH_MXC_UNCOMPRESS_H__
+
+#define __MXC_BOOT_UNCOMPRESS
+
+#include <mach/hardware.h>
+
+#define UART(x) (*(volatile unsigned long *)(serial_port + (x)))
+
+#define USR2 0x98
+#define USR2_TXFE (1<<14)
+#define TXR  0x40
+#define UCR1 0x80
+#define UCR1_UARTEN 1
+
+/*
+ * The following code assumes the serial port has already been
+ * initialized by the bootloader.  We search for the first enabled
+ * port in the most probable order.  If you didn't setup a port in
+ * your bootloader then nothing will appear (which might be desired).
+ *
+ * This does not append a newline
+ */
+
+static void putc(int ch)
+{
+	static unsigned long serial_port = 0;
+
+	if (unlikely(serial_port == 0)) {
+		do {
+			serial_port = UART1_BASE_ADDR;
+			if (UART(UCR1) & UCR1_UARTEN)
+				break;
+			serial_port = UART2_BASE_ADDR;
+			if (UART(UCR1) & UCR1_UARTEN)
+				break;
+			return;
+		} while (0);
+	}
+
+	while (!(UART(USR2) & USR2_TXFE))
+		barrier();
+
+	UART(TXR) = ch;
+}
+
+#define flush() do { } while (0)
+
+/*
+ * nothing to do
+ */
+#define arch_decomp_setup()
+
+#define arch_decomp_wdog()
+
+#endif				/* __ASM_ARCH_MXC_UNCOMPRESS_H__ */
diff --git a/include/asm-arm/arch-mxc/vmalloc.h b/arch/arm/plat-mxc/include/mach/vmalloc.h
index 62d97623412f..62d97623412f 100644
--- a/include/asm-arm/arch-mxc/vmalloc.h
+++ b/arch/arm/plat-mxc/include/mach/vmalloc.h
diff --git a/arch/arm/plat-mxc/iomux-mx1-mx2.c b/arch/arm/plat-mxc/iomux-mx1-mx2.c
index 1985571eb40c..d97387aa9a42 100644
--- a/arch/arm/plat-mxc/iomux-mx1-mx2.c
+++ b/arch/arm/plat-mxc/iomux-mx1-mx2.c
@@ -30,9 +30,9 @@
 #include <linux/string.h>
 #include <linux/gpio.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/mach/map.h>
-#include <asm/arch/iomux-mx1-mx2.h>
+#include <mach/iomux-mx1-mx2.h>
 
 void mxc_gpio_mode(int gpio_mode)
 {
diff --git a/arch/arm/plat-mxc/irq.c b/arch/arm/plat-mxc/irq.c
index 1fbe01da6925..1053b666c676 100644
--- a/arch/arm/plat-mxc/irq.c
+++ b/arch/arm/plat-mxc/irq.c
@@ -19,7 +19,7 @@
 
 #include <linux/irq.h>
 #include <asm/io.h>
-#include <asm/arch/common.h>
+#include <mach/common.h>
 
 #define AVIC_BASE		IO_ADDRESS(AVIC_BASE_ADDR)
 #define AVIC_INTCNTL		(AVIC_BASE + 0x00)	/* int control reg */
diff --git a/arch/arm/plat-mxc/time.c b/arch/arm/plat-mxc/time.c
index 3bf86343fdf4..fd28f5194f71 100644
--- a/arch/arm/plat-mxc/time.c
+++ b/arch/arm/plat-mxc/time.c
@@ -26,10 +26,10 @@
 #include <linux/clockchips.h>
 #include <linux/clk.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/mach/time.h>
-#include <asm/arch/common.h>
-#include <asm/arch/mxc_timer.h>
+#include <mach/common.h>
+#include <mach/mxc_timer.h>
 
 static struct clock_event_device clockevent_mxc;
 static enum clock_event_mode clockevent_mode = CLOCK_EVT_MODE_UNUSED;
diff --git a/arch/arm/plat-omap/clock.c b/arch/arm/plat-omap/clock.c
index c2e741de0203..197974defbe4 100644
--- a/arch/arm/plat-omap/clock.c
+++ b/arch/arm/plat-omap/clock.c
@@ -10,7 +10,6 @@
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
  */
-#include <linux/version.h>
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/module.h>
@@ -26,7 +25,7 @@
 
 #include <asm/io.h>
 
-#include <asm/arch/clock.h>
+#include <mach/clock.h>
 
 static LIST_HEAD(clocks);
 static DEFINE_MUTEX(clocks_mutex);
diff --git a/arch/arm/plat-omap/common.c b/arch/arm/plat-omap/common.c
index 8d04929a3c75..f4dff423ae7c 100644
--- a/arch/arm/plat-omap/common.c
+++ b/arch/arm/plat-omap/common.c
@@ -19,20 +19,20 @@
 #include <linux/serial_reg.h>
 #include <linux/clk.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/system.h>
 #include <asm/pgtable.h>
 #include <asm/mach/map.h>
 #include <asm/io.h>
 #include <asm/setup.h>
 
-#include <asm/arch/common.h>
-#include <asm/arch/board.h>
-#include <asm/arch/control.h>
-#include <asm/arch/mux.h>
-#include <asm/arch/fpga.h>
+#include <mach/common.h>
+#include <mach/board.h>
+#include <mach/control.h>
+#include <mach/mux.h>
+#include <mach/fpga.h>
 
-#include <asm/arch/clock.h>
+#include <mach/clock.h>
 
 #if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
 # include "../mach-omap2/sdrc.h"
diff --git a/arch/arm/plat-omap/cpu-omap.c b/arch/arm/plat-omap/cpu-omap.c
index d719c15daa55..ae1de308aaad 100644
--- a/arch/arm/plat-omap/cpu-omap.c
+++ b/arch/arm/plat-omap/cpu-omap.c
@@ -21,7 +21,7 @@
 #include <linux/err.h>
 #include <linux/clk.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 #include <asm/system.h>
 
diff --git a/arch/arm/plat-omap/debug-devices.c b/arch/arm/plat-omap/debug-devices.c
index f455233af082..5b73bb274452 100644
--- a/arch/arm/plat-omap/debug-devices.c
+++ b/arch/arm/plat-omap/debug-devices.c
@@ -13,11 +13,11 @@
 #include <linux/init.h>
 #include <linux/platform_device.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 
-#include <asm/arch/board.h>
-#include <asm/arch/gpio.h>
+#include <mach/board.h>
+#include <mach/gpio.h>
 
 
 /* Many OMAP development platforms reuse the same "debug board"; these
diff --git a/arch/arm/plat-omap/debug-leds.c b/arch/arm/plat-omap/debug-leds.c
index 9128a80d228f..9422dee7de84 100644
--- a/arch/arm/plat-omap/debug-leds.c
+++ b/arch/arm/plat-omap/debug-leds.c
@@ -13,13 +13,13 @@
 #include <linux/leds.h>
 
 #include <asm/io.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/leds.h>
 #include <asm/system.h>
 #include <asm/mach-types.h>
 
-#include <asm/arch/fpga.h>
-#include <asm/arch/gpio.h>
+#include <mach/fpga.h>
+#include <mach/gpio.h>
 
 
 /* Many OMAP development platforms reuse the same "debug board"; these
diff --git a/arch/arm/plat-omap/devices.c b/arch/arm/plat-omap/devices.c
index 81002b722da1..187e3d8bfdfe 100644
--- a/arch/arm/plat-omap/devices.c
+++ b/arch/arm/plat-omap/devices.c
@@ -14,17 +14,17 @@
 #include <linux/init.h>
 #include <linux/platform_device.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 #include <asm/mach-types.h>
 #include <asm/mach/map.h>
 
-#include <asm/arch/tc.h>
-#include <asm/arch/board.h>
-#include <asm/arch/mux.h>
-#include <asm/arch/gpio.h>
-#include <asm/arch/menelaus.h>
-#include <asm/arch/mcbsp.h>
+#include <mach/tc.h>
+#include <mach/board.h>
+#include <mach/mux.h>
+#include <mach/gpio.h>
+#include <mach/menelaus.h>
+#include <mach/mcbsp.h>
 
 #if	defined(CONFIG_OMAP_DSP) || defined(CONFIG_OMAP_DSP_MODULE)
 
diff --git a/arch/arm/plat-omap/dma.c b/arch/arm/plat-omap/dma.c
index fac8e994f588..a63b644ad305 100644
--- a/arch/arm/plat-omap/dma.c
+++ b/arch/arm/plat-omap/dma.c
@@ -28,10 +28,10 @@
 #include <linux/io.h>
 
 #include <asm/system.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/dma.h>
 
-#include <asm/arch/tc.h>
+#include <mach/tc.h>
 
 #undef DEBUG
 
diff --git a/arch/arm/plat-omap/dmtimer.c b/arch/arm/plat-omap/dmtimer.c
index f22506af0e67..743a4abcd85d 100644
--- a/arch/arm/plat-omap/dmtimer.c
+++ b/arch/arm/plat-omap/dmtimer.c
@@ -32,10 +32,10 @@
 #include <linux/list.h>
 #include <linux/clk.h>
 #include <linux/delay.h>
-#include <asm/hardware.h>
-#include <asm/arch/dmtimer.h>
+#include <mach/hardware.h>
+#include <mach/dmtimer.h>
 #include <asm/io.h>
-#include <asm/arch/irqs.h>
+#include <mach/irqs.h>
 
 /* register offsets */
 #define _OMAP_TIMER_ID_OFFSET		0x00
diff --git a/arch/arm/plat-omap/fb.c b/arch/arm/plat-omap/fb.c
index 5d107520e6b9..17a92a31e746 100644
--- a/arch/arm/plat-omap/fb.c
+++ b/arch/arm/plat-omap/fb.c
@@ -28,14 +28,13 @@
 #include <linux/platform_device.h>
 #include <linux/bootmem.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
-#include <asm/mach-types.h>
 #include <asm/mach/map.h>
 
-#include <asm/arch/board.h>
-#include <asm/arch/sram.h>
-#include <asm/arch/omapfb.h>
+#include <mach/board.h>
+#include <mach/sram.h>
+#include <mach/omapfb.h>
 
 #if defined(CONFIG_FB_OMAP) || defined(CONFIG_FB_OMAP_MODULE)
 
diff --git a/arch/arm/plat-omap/gpio.c b/arch/arm/plat-omap/gpio.c
index 1903a3491ee9..3e76ee2bc731 100644
--- a/arch/arm/plat-omap/gpio.c
+++ b/arch/arm/plat-omap/gpio.c
@@ -18,10 +18,10 @@
 #include <linux/err.h>
 #include <linux/clk.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/irq.h>
-#include <asm/arch/irqs.h>
-#include <asm/arch/gpio.h>
+#include <mach/irqs.h>
+#include <mach/gpio.h>
 #include <asm/mach/irq.h>
 
 #include <asm/io.h>
@@ -517,13 +517,13 @@ static inline void set_24xx_gpio_triggering(struct gpio_bank *bank, int gpio,
 	u32 gpio_bit = 1 << gpio;
 
 	MOD_REG_BIT(OMAP24XX_GPIO_LEVELDETECT0, gpio_bit,
-		trigger & __IRQT_LOWLVL);
+		trigger & IRQ_TYPE_LEVEL_LOW);
 	MOD_REG_BIT(OMAP24XX_GPIO_LEVELDETECT1, gpio_bit,
-		trigger & __IRQT_HIGHLVL);
+		trigger & IRQ_TYPE_LEVEL_HIGH);
 	MOD_REG_BIT(OMAP24XX_GPIO_RISINGDETECT, gpio_bit,
-		trigger & __IRQT_RISEDGE);
+		trigger & IRQ_TYPE_EDGE_RISING);
 	MOD_REG_BIT(OMAP24XX_GPIO_FALLINGDETECT, gpio_bit,
-		trigger & __IRQT_FALEDGE);
+		trigger & IRQ_TYPE_EDGE_FALLING);
 
 	if (likely(!(bank->non_wakeup_gpios & gpio_bit))) {
 		if (trigger != 0)
@@ -555,9 +555,9 @@ static int _set_gpio_triggering(struct gpio_bank *bank, int gpio, int trigger)
 	case METHOD_MPUIO:
 		reg += OMAP_MPUIO_GPIO_INT_EDGE;
 		l = __raw_readl(reg);
-		if (trigger & __IRQT_RISEDGE)
+		if (trigger & IRQ_TYPE_EDGE_RISING)
 			l |= 1 << gpio;
-		else if (trigger & __IRQT_FALEDGE)
+		else if (trigger & IRQ_TYPE_EDGE_FALLING)
 			l &= ~(1 << gpio);
 		else
 			goto bad;
@@ -567,9 +567,9 @@ static int _set_gpio_triggering(struct gpio_bank *bank, int gpio, int trigger)
 	case METHOD_GPIO_1510:
 		reg += OMAP1510_GPIO_INT_CONTROL;
 		l = __raw_readl(reg);
-		if (trigger & __IRQT_RISEDGE)
+		if (trigger & IRQ_TYPE_EDGE_RISING)
 			l |= 1 << gpio;
-		else if (trigger & __IRQT_FALEDGE)
+		else if (trigger & IRQ_TYPE_EDGE_FALLING)
 			l &= ~(1 << gpio);
 		else
 			goto bad;
@@ -584,9 +584,9 @@ static int _set_gpio_triggering(struct gpio_bank *bank, int gpio, int trigger)
 		gpio &= 0x07;
 		l = __raw_readl(reg);
 		l &= ~(3 << (gpio << 1));
-		if (trigger & __IRQT_RISEDGE)
+		if (trigger & IRQ_TYPE_EDGE_RISING)
 			l |= 2 << (gpio << 1);
-		if (trigger & __IRQT_FALEDGE)
+		if (trigger & IRQ_TYPE_EDGE_FALLING)
 			l |= 1 << (gpio << 1);
 		if (trigger)
 			/* Enable wake-up during idle for dynamic tick */
@@ -599,9 +599,9 @@ static int _set_gpio_triggering(struct gpio_bank *bank, int gpio, int trigger)
 	case METHOD_GPIO_730:
 		reg += OMAP730_GPIO_INT_CONTROL;
 		l = __raw_readl(reg);
-		if (trigger & __IRQT_RISEDGE)
+		if (trigger & IRQ_TYPE_EDGE_RISING)
 			l |= 1 << gpio;
-		else if (trigger & __IRQT_FALEDGE)
+		else if (trigger & IRQ_TYPE_EDGE_FALLING)
 			l &= ~(1 << gpio);
 		else
 			goto bad;
@@ -887,7 +887,7 @@ static void _reset_gpio(struct gpio_bank *bank, int gpio)
 	_set_gpio_direction(bank, get_gpio_index(gpio), 1);
 	_set_gpio_irqenable(bank, gpio, 0);
 	_clear_gpio_irqstatus(bank, gpio);
-	_set_gpio_triggering(bank, get_gpio_index(gpio), IRQT_NOEDGE);
+	_set_gpio_triggering(bank, get_gpio_index(gpio), IRQ_TYPE_NONE);
 }
 
 /* Use disable_irq_wake() and enable_irq_wake() functions from drivers */
@@ -924,7 +924,7 @@ int omap_request_gpio(int gpio)
 	/* Set trigger to none. You need to enable the desired trigger with
 	 * request_irq() or set_irq_type().
 	 */
-	_set_gpio_triggering(bank, get_gpio_index(gpio), IRQT_NOEDGE);
+	_set_gpio_triggering(bank, get_gpio_index(gpio), IRQ_TYPE_NONE);
 
 #ifdef CONFIG_ARCH_OMAP15XX
 	if (bank->method == METHOD_GPIO_1510) {
@@ -1488,6 +1488,9 @@ static int __init _omap_gpio_init(void)
 		bank->chip.set = gpio_set;
 		if (bank_is_mpuio(bank)) {
 			bank->chip.label = "mpuio";
+#ifdef CONFIG_ARCH_OMAP1
+			bank->chip.dev = &omap_mpuio_device.dev;
+#endif
 			bank->chip.base = OMAP_MPUIO(0);
 		} else {
 			bank->chip.label = "gpio";
diff --git a/arch/arm/plat-omap/i2c.c b/arch/arm/plat-omap/i2c.c
index 7990ab185bb1..0e6d147ab6f8 100644
--- a/arch/arm/plat-omap/i2c.c
+++ b/arch/arm/plat-omap/i2c.c
@@ -26,8 +26,7 @@
 #include <linux/kernel.h>
 #include <linux/platform_device.h>
 #include <linux/i2c.h>
-#include <asm/mach-types.h>
-#include <asm/arch/mux.h>
+#include <mach/mux.h>
 
 #define OMAP_I2C_SIZE		0x3f
 #define OMAP1_I2C_BASE		0xfffb3800
diff --git a/include/asm-arm/arch-omap/aic23.h b/arch/arm/plat-omap/include/mach/aic23.h
index aec2d6563622..5ccedac77526 100644
--- a/include/asm-arm/arch-omap/aic23.h
+++ b/arch/arm/plat-omap/include/mach/aic23.h
@@ -1,5 +1,5 @@
 /*
- * linux/include/asm-arm/arch-omap/aic23.h
+ * arch/arm/plat-omap/include/mach/aic23.h
  *
  * Hardware definitions for TI TLV320AIC23 audio codec
  *
diff --git a/include/asm-arm/arch-omap/blizzard.h b/arch/arm/plat-omap/include/mach/blizzard.h
index 8d160f171372..8d160f171372 100644
--- a/include/asm-arm/arch-omap/blizzard.h
+++ b/arch/arm/plat-omap/include/mach/blizzard.h
diff --git a/include/asm-arm/arch-omap/board-2430sdp.h b/arch/arm/plat-omap/include/mach/board-2430sdp.h
index c7db9004ec31..cf1dc0223949 100644
--- a/include/asm-arm/arch-omap/board-2430sdp.h
+++ b/arch/arm/plat-omap/include/mach/board-2430sdp.h
@@ -1,5 +1,5 @@
 /*
- * linux/include/asm-arm/arch-omap/board-2430sdp.h
+ * arch/arm/plat-omap/include/mach/board-2430sdp.h
  *
  * Hardware definitions for TI OMAP2430 SDP board.
  *
diff --git a/include/asm-arm/arch-omap/board-ams-delta.h b/arch/arm/plat-omap/include/mach/board-ams-delta.h
index 9aee15d97145..51b102dc906b 100644
--- a/include/asm-arm/arch-omap/board-ams-delta.h
+++ b/arch/arm/plat-omap/include/mach/board-ams-delta.h
@@ -1,5 +1,5 @@
 /*
- * linux/include/asm-arm/arch-omap/board-ams-delta.h
+ * arch/arm/plat-omap/include/mach/board-ams-delta.h
  *
  * Copyright (C) 2006 Jonathan McDowell <noodles@earth.li>
  *
diff --git a/include/asm-arm/arch-omap/board-apollon.h b/arch/arm/plat-omap/include/mach/board-apollon.h
index 547125a4695e..d6f2a8e963d5 100644
--- a/include/asm-arm/arch-omap/board-apollon.h
+++ b/arch/arm/plat-omap/include/mach/board-apollon.h
@@ -1,5 +1,5 @@
 /*
- * linux/include/asm-arm/arch-omap/board-apollon.h
+ * arch/arm/plat-omap/include/mach/board-apollon.h
  *
  * Hardware definitions for Samsung OMAP24XX Apollon board.
  *
diff --git a/include/asm-arm/arch-omap/board-fsample.h b/arch/arm/plat-omap/include/mach/board-fsample.h
index 89a1e529fb6f..cb3c5ae12776 100644
--- a/include/asm-arm/arch-omap/board-fsample.h
+++ b/arch/arm/plat-omap/include/mach/board-fsample.h
@@ -1,5 +1,5 @@
 /*
- * linux/include/asm-arm/arch-omap/board-fsample.h
+ * arch/arm/plat-omap/include/mach/board-fsample.h
  *
  * Board-specific goodies for TI F-Sample.
  *
@@ -15,7 +15,7 @@
 #define __ASM_ARCH_OMAP_FSAMPLE_H
 
 /* fsample is pretty close to p2-sample */
-#include <asm/arch/board-perseus2.h>
+#include <mach/board-perseus2.h>
 
 #define fsample_cpld_read(reg) __raw_readb(reg)
 #define fsample_cpld_write(val, reg) __raw_writeb(val, reg)
diff --git a/include/asm-arm/arch-omap/board-h2.h b/arch/arm/plat-omap/include/mach/board-h2.h
index c322796d0d26..2a050e9be65f 100644
--- a/include/asm-arm/arch-omap/board-h2.h
+++ b/arch/arm/plat-omap/include/mach/board-h2.h
@@ -1,5 +1,5 @@
 /*
- * linux/include/asm-arm/arch-omap/board-h2.h
+ * arch/arm/plat-omap/include/mach/board-h2.h
  *
  * Hardware definitions for TI OMAP1610 H2 board.
  *
diff --git a/include/asm-arm/arch-omap/board-h3.h b/arch/arm/plat-omap/include/mach/board-h3.h
index c5d0f32a40ac..14909dc7858a 100644
--- a/include/asm-arm/arch-omap/board-h3.h
+++ b/arch/arm/plat-omap/include/mach/board-h3.h
@@ -1,5 +1,5 @@
 /*
- * linux/include/asm-arm/arch-omap/board-h3.h
+ * arch/arm/plat-omap/include/mach/board-h3.h
  *
  * Copyright (C) 2001 RidgeRun, Inc.
  * Copyright (C) 2004 Texas Instruments, Inc.
diff --git a/include/asm-arm/arch-omap/board-h4.h b/arch/arm/plat-omap/include/mach/board-h4.h
index 7e0efef4bb65..1470cd3e519b 100644
--- a/include/asm-arm/arch-omap/board-h4.h
+++ b/arch/arm/plat-omap/include/mach/board-h4.h
@@ -1,5 +1,5 @@
 /*
- * linux/include/asm-arm/arch-omap/board-h4.h
+ * arch/arm/plat-omap/include/mach/board-h4.h
  *
  * Hardware definitions for TI OMAP1610 H4 board.
  *
diff --git a/include/asm-arm/arch-omap/board-innovator.h b/arch/arm/plat-omap/include/mach/board-innovator.h
index 9ca03dec9d36..5ae3e79b9f9c 100644
--- a/include/asm-arm/arch-omap/board-innovator.h
+++ b/arch/arm/plat-omap/include/mach/board-innovator.h
@@ -1,5 +1,5 @@
 /*
- * linux/include/asm-arm/arch-omap/board-innovator.h
+ * arch/arm/plat-omap/include/mach/board-innovator.h
  *
  * Copyright (C) 2001 RidgeRun, Inc.
  *
diff --git a/include/asm-arm/arch-omap/board-nokia.h b/arch/arm/plat-omap/include/mach/board-nokia.h
index 72deea203493..2abbe001af8c 100644
--- a/include/asm-arm/arch-omap/board-nokia.h
+++ b/arch/arm/plat-omap/include/mach/board-nokia.h
@@ -1,5 +1,5 @@
 /*
- *  linux/include/asm-arm/arch-omap/board-nokia.h
+ *  arch/arm/plat-omap/include/mach/board-nokia.h
  *
  *  Information structures for Nokia-specific board config data
  *
diff --git a/include/asm-arm/arch-omap/board-osk.h b/arch/arm/plat-omap/include/mach/board-osk.h
index 94926090e475..3850cb1f220a 100644
--- a/include/asm-arm/arch-omap/board-osk.h
+++ b/arch/arm/plat-omap/include/mach/board-osk.h
@@ -1,5 +1,5 @@
 /*
- * linux/include/asm-arm/arch-omap/board-osk.h
+ * arch/arm/plat-omap/include/mach/board-osk.h
  *
  * Hardware definitions for TI OMAP5912 OSK board.
  *
diff --git a/include/asm-arm/arch-omap/board-palmte.h b/arch/arm/plat-omap/include/mach/board-palmte.h
index 6fac2c8935be..6906cdebbcfb 100644
--- a/include/asm-arm/arch-omap/board-palmte.h
+++ b/arch/arm/plat-omap/include/mach/board-palmte.h
@@ -1,5 +1,5 @@
 /*
- * linux/include/asm-arm/arch-omap/board-palmte.h
+ * arch/arm/plat-omap/include/mach/board-palmte.h
  *
  * Hardware definitions for the Palm Tungsten E device.
  *
diff --git a/include/asm-arm/arch-omap/board-palmtt.h b/arch/arm/plat-omap/include/mach/board-palmtt.h
index d9590b0ec90e..e79f382b5931 100644
--- a/include/asm-arm/arch-omap/board-palmtt.h
+++ b/arch/arm/plat-omap/include/mach/board-palmtt.h
@@ -1,5 +1,5 @@
 /*
- * linux/include/asm-arm/arch-omap/board-palmte.h
+ * arch/arm/plat-omap/include/mach/board-palmte.h
  *
  * Hardware definitions for the Palm Tungsten|T device.
  *
diff --git a/include/asm-arm/arch-omap/board-palmz71.h b/arch/arm/plat-omap/include/mach/board-palmz71.h
index 1252a859787d..b1d7d579b313 100644
--- a/include/asm-arm/arch-omap/board-palmz71.h
+++ b/arch/arm/plat-omap/include/mach/board-palmz71.h
@@ -1,5 +1,5 @@
 /*
- * linux/include/asm-arm/arch-omap/board-palmz71.h
+ * arch/arm/plat-omap/include/mach/board-palmz71.h
  *
  * Hardware definitions for the Palm Zire71 device.
  *
diff --git a/include/asm-arm/arch-omap/board-perseus2.h b/arch/arm/plat-omap/include/mach/board-perseus2.h
index d7429cb0f726..c06c3d717d57 100644
--- a/include/asm-arm/arch-omap/board-perseus2.h
+++ b/arch/arm/plat-omap/include/mach/board-perseus2.h
@@ -1,5 +1,5 @@
 /*
- *  linux/include/asm-arm/arch-omap/board-perseus2.h
+ *  arch/arm/plat-omap/include/mach/board-perseus2.h
  *
  *  Copyright 2003 by Texas Instruments Incorporated
  *    OMAP730 / Perseus2 support by Jean Pihet
@@ -30,7 +30,7 @@
 #ifndef __ASM_ARCH_OMAP_PERSEUS2_H
 #define __ASM_ARCH_OMAP_PERSEUS2_H
 
-#include <asm/arch/fpga.h>
+#include <mach/fpga.h>
 
 #ifndef OMAP_SDRAM_DEVICE
 #define OMAP_SDRAM_DEVICE		D256M_1X16_4B
diff --git a/include/asm-arm/arch-omap/board-sx1.h b/arch/arm/plat-omap/include/mach/board-sx1.h
index 355adbdaae33..355adbdaae33 100644
--- a/include/asm-arm/arch-omap/board-sx1.h
+++ b/arch/arm/plat-omap/include/mach/board-sx1.h
diff --git a/include/asm-arm/arch-omap/board-voiceblue.h b/arch/arm/plat-omap/include/mach/board-voiceblue.h
index ed6d346ee123..ed6d346ee123 100644
--- a/include/asm-arm/arch-omap/board-voiceblue.h
+++ b/arch/arm/plat-omap/include/mach/board-voiceblue.h
diff --git a/arch/arm/plat-omap/include/mach/board.h b/arch/arm/plat-omap/include/mach/board.h
new file mode 100644
index 000000000000..54445642f35d
--- /dev/null
+++ b/arch/arm/plat-omap/include/mach/board.h
@@ -0,0 +1,186 @@
+/*
+ *  arch/arm/plat-omap/include/mach/board.h
+ *
+ *  Information structures for board-specific data
+ *
+ *  Copyright (C) 2004	Nokia Corporation
+ *  Written by Juha Yrjölä <juha.yrjola@nokia.com>
+ */
+
+#ifndef _OMAP_BOARD_H
+#define _OMAP_BOARD_H
+
+#include <linux/types.h>
+
+#include <mach/gpio-switch.h>
+
+/* Different peripheral ids */
+#define OMAP_TAG_CLOCK		0x4f01
+#define OMAP_TAG_MMC		0x4f02
+#define OMAP_TAG_SERIAL_CONSOLE 0x4f03
+#define OMAP_TAG_USB		0x4f04
+#define OMAP_TAG_LCD		0x4f05
+#define OMAP_TAG_GPIO_SWITCH	0x4f06
+#define OMAP_TAG_UART		0x4f07
+#define OMAP_TAG_FBMEM		0x4f08
+#define OMAP_TAG_STI_CONSOLE	0x4f09
+#define OMAP_TAG_CAMERA_SENSOR	0x4f0a
+
+#define OMAP_TAG_BOOT_REASON    0x4f80
+#define OMAP_TAG_FLASH_PART	0x4f81
+#define OMAP_TAG_VERSION_STR	0x4f82
+
+struct omap_clock_config {
+	/* 0 for 12 MHz, 1 for 13 MHz and 2 for 19.2 MHz */
+	u8 system_clock_type;
+};
+
+struct omap_mmc_conf {
+	unsigned enabled:1;
+	/* nomux means "standard" muxing is wrong on this board, and that
+	 * board-specific code handled it before common init logic.
+	 */
+	unsigned nomux:1;
+	/* switch pin can be for card detect (default) or card cover */
+	unsigned cover:1;
+	/* 4 wire signaling is optional, and is only used for SD/SDIO */
+	unsigned wire4:1;
+	s16 power_pin;
+	s16 switch_pin;
+	s16 wp_pin;
+};
+
+struct omap_mmc_config {
+	struct omap_mmc_conf mmc[2];
+};
+
+struct omap_serial_console_config {
+	u8 console_uart;
+	u32 console_speed;
+};
+
+struct omap_sti_console_config {
+	unsigned enable:1;
+	u8 channel;
+};
+
+struct omap_camera_sensor_config {
+	u16 reset_gpio;
+	int (*power_on)(void * data);
+	int (*power_off)(void * data);
+};
+
+struct omap_usb_config {
+	/* Configure drivers according to the connectors on your board:
+	 *  - "A" connector (rectagular)
+	 *	... for host/OHCI use, set "register_host".
+	 *  - "B" connector (squarish) or "Mini-B"
+	 *	... for device/gadget use, set "register_dev".
+	 *  - "Mini-AB" connector (very similar to Mini-B)
+	 *	... for OTG use as device OR host, initialize "otg"
+	 */
+	unsigned	register_host:1;
+	unsigned	register_dev:1;
+	u8		otg;	/* port number, 1-based:  usb1 == 2 */
+
+	u8		hmc_mode;
+
+	/* implicitly true if otg:  host supports remote wakeup? */
+	u8		rwc;
+
+	/* signaling pins used to talk to transceiver on usbN:
+	 *  0 == usbN unused
+	 *  2 == usb0-only, using internal transceiver
+	 *  3 == 3 wire bidirectional
+	 *  4 == 4 wire bidirectional
+	 *  6 == 6 wire unidirectional (or TLL)
+	 */
+	u8		pins[3];
+};
+
+struct omap_lcd_config {
+	char panel_name[16];
+	char ctrl_name[16];
+	s16  nreset_gpio;
+	u8   data_lines;
+};
+
+struct device;
+struct fb_info;
+struct omap_backlight_config {
+	int default_intensity;
+	int (*set_power)(struct device *dev, int state);
+	int (*check_fb)(struct fb_info *fb);
+};
+
+struct omap_fbmem_config {
+	u32 start;
+	u32 size;
+};
+
+struct omap_pwm_led_platform_data {
+	const char *name;
+	int intensity_timer;
+	int blink_timer;
+	void (*set_power)(struct omap_pwm_led_platform_data *self, int on_off);
+};
+
+/* See arch/arm/plat-omap/include/mach/gpio-switch.h for definitions */
+struct omap_gpio_switch_config {
+	char name[12];
+	u16 gpio;
+	int flags:4;
+	int type:4;
+	int key_code:24; /* Linux key code */
+};
+
+struct omap_uart_config {
+	/* Bit field of UARTs present; bit 0 --> UART1 */
+	unsigned int enabled_uarts;
+};
+
+
+struct omap_flash_part_config {
+	char part_table[0];
+};
+
+struct omap_boot_reason_config {
+	char reason_str[12];
+};
+
+struct omap_version_config {
+	char component[12];
+	char version[12];
+};
+
+
+#include <mach/board-nokia.h>
+
+struct omap_board_config_entry {
+	u16 tag;
+	u16 len;
+	u8  data[0];
+};
+
+struct omap_board_config_kernel {
+	u16 tag;
+	const void *data;
+};
+
+extern const void *__omap_get_config(u16 tag, size_t len, int nr);
+
+#define omap_get_config(tag, type) \
+	((const type *) __omap_get_config((tag), sizeof(type), 0))
+#define omap_get_nr_config(tag, type, nr) \
+	((const type *) __omap_get_config((tag), sizeof(type), (nr)))
+
+extern const void *omap_get_var_config(u16 tag, size_t *len);
+
+extern struct omap_board_config_kernel *omap_board_config;
+extern int omap_board_config_size;
+
+
+/* for TI reference platforms sharing the same debug card */
+extern int debug_card_init(u32 addr, unsigned gpio);
+
+#endif
diff --git a/arch/arm/plat-omap/include/mach/clock.h b/arch/arm/plat-omap/include/mach/clock.h
new file mode 100644
index 000000000000..92f7c7238fcd
--- /dev/null
+++ b/arch/arm/plat-omap/include/mach/clock.h
@@ -0,0 +1,162 @@
+/*
+ *  arch/arm/plat-omap/include/mach/clock.h
+ *
+ *  Copyright (C) 2004 - 2005 Nokia corporation
+ *  Written by Tuukka Tikkanen <tuukka.tikkanen@elektrobit.com>
+ *  Based on clocks.h by Tony Lindgren, Gordon McNutt and RidgeRun, Inc
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ARCH_ARM_OMAP_CLOCK_H
+#define __ARCH_ARM_OMAP_CLOCK_H
+
+struct module;
+struct clk;
+
+#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
+
+struct clksel_rate {
+	u8			div;
+	u32			val;
+	u8			flags;
+};
+
+struct clksel {
+	struct clk		 *parent;
+	const struct clksel_rate *rates;
+};
+
+struct dpll_data {
+	void __iomem		*mult_div1_reg;
+	u32			mult_mask;
+	u32			div1_mask;
+	u16			last_rounded_m;
+	u8			last_rounded_n;
+	unsigned long		last_rounded_rate;
+	unsigned int		rate_tolerance;
+	u16			max_multiplier;
+	u8			max_divider;
+	u32			max_tolerance;
+#  if defined(CONFIG_ARCH_OMAP3)
+	u8			modes;
+	void __iomem		*control_reg;
+	u32			enable_mask;
+	u8			auto_recal_bit;
+	u8			recal_en_bit;
+	u8			recal_st_bit;
+	void __iomem		*autoidle_reg;
+	u32			autoidle_mask;
+	void __iomem		*idlest_reg;
+	u8			idlest_bit;
+#  endif
+};
+
+#endif
+
+struct clk {
+	struct list_head	node;
+	struct module		*owner;
+	const char		*name;
+	int			id;
+	struct clk		*parent;
+	unsigned long		rate;
+	__u32			flags;
+	void __iomem		*enable_reg;
+	__u8			enable_bit;
+	__s8			usecount;
+	void			(*recalc)(struct clk *);
+	int			(*set_rate)(struct clk *, unsigned long);
+	long			(*round_rate)(struct clk *, unsigned long);
+	void			(*init)(struct clk *);
+	int			(*enable)(struct clk *);
+	void			(*disable)(struct clk *);
+#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
+	u8			fixed_div;
+	void __iomem		*clksel_reg;
+	u32			clksel_mask;
+	const struct clksel	*clksel;
+	struct dpll_data	*dpll_data;
+#else
+	__u8			rate_offset;
+	__u8			src_offset;
+#endif
+#if defined(CONFIG_PM_DEBUG) && defined(CONFIG_DEBUG_FS)
+	struct dentry		*dent;	/* For visible tree hierarchy */
+#endif
+};
+
+struct cpufreq_frequency_table;
+
+struct clk_functions {
+	int		(*clk_enable)(struct clk *clk);
+	void		(*clk_disable)(struct clk *clk);
+	long		(*clk_round_rate)(struct clk *clk, unsigned long rate);
+	int		(*clk_set_rate)(struct clk *clk, unsigned long rate);
+	int		(*clk_set_parent)(struct clk *clk, struct clk *parent);
+	struct clk *	(*clk_get_parent)(struct clk *clk);
+	void		(*clk_allow_idle)(struct clk *clk);
+	void		(*clk_deny_idle)(struct clk *clk);
+	void		(*clk_disable_unused)(struct clk *clk);
+#ifdef CONFIG_CPU_FREQ
+	void		(*clk_init_cpufreq_table)(struct cpufreq_frequency_table **);
+#endif
+};
+
+extern unsigned int mpurate;
+
+extern int clk_init(struct clk_functions * custom_clocks);
+extern int clk_register(struct clk *clk);
+extern void clk_unregister(struct clk *clk);
+extern void propagate_rate(struct clk *clk);
+extern void recalculate_root_clocks(void);
+extern void followparent_recalc(struct clk * clk);
+extern void clk_allow_idle(struct clk *clk);
+extern void clk_deny_idle(struct clk *clk);
+extern int clk_get_usecount(struct clk *clk);
+extern void clk_enable_init_clocks(void);
+
+/* Clock flags */
+#define RATE_CKCTL		(1 << 0)	/* Main fixed ratio clocks */
+#define RATE_FIXED		(1 << 1)	/* Fixed clock rate */
+#define RATE_PROPAGATES		(1 << 2)	/* Program children too */
+#define VIRTUAL_CLOCK		(1 << 3)	/* Composite clock from table */
+#define ALWAYS_ENABLED		(1 << 4)	/* Clock cannot be disabled */
+#define ENABLE_REG_32BIT	(1 << 5)	/* Use 32-bit access */
+#define VIRTUAL_IO_ADDRESS	(1 << 6)	/* Clock in virtual address */
+#define CLOCK_IDLE_CONTROL	(1 << 7)
+#define CLOCK_NO_IDLE_PARENT	(1 << 8)
+#define DELAYED_APP		(1 << 9)	/* Delay application of clock */
+#define CONFIG_PARTICIPANT	(1 << 10)	/* Fundamental clock */
+#define ENABLE_ON_INIT		(1 << 11)	/* Enable upon framework init */
+#define INVERT_ENABLE           (1 << 12)       /* 0 enables, 1 disables */
+/* bits 13-20 are currently free */
+#define CLOCK_IN_OMAP310	(1 << 21)
+#define CLOCK_IN_OMAP730	(1 << 22)
+#define CLOCK_IN_OMAP1510	(1 << 23)
+#define CLOCK_IN_OMAP16XX	(1 << 24)
+#define CLOCK_IN_OMAP242X	(1 << 25)
+#define CLOCK_IN_OMAP243X	(1 << 26)
+#define CLOCK_IN_OMAP343X	(1 << 27)	/* clocks common to all 343X */
+#define PARENT_CONTROLS_CLOCK	(1 << 28)
+#define CLOCK_IN_OMAP3430ES1	(1 << 29)	/* 3430ES1 clocks only */
+#define CLOCK_IN_OMAP3430ES2	(1 << 30)	/* 3430ES2 clocks only */
+
+/* Clksel_rate flags */
+#define DEFAULT_RATE		(1 << 0)
+#define RATE_IN_242X		(1 << 1)
+#define RATE_IN_243X		(1 << 2)
+#define RATE_IN_343X		(1 << 3)	/* rates common to all 343X */
+#define RATE_IN_3430ES2		(1 << 4)	/* 3430ES2 rates only */
+
+#define RATE_IN_24XX		(RATE_IN_242X | RATE_IN_243X)
+
+
+/* CM_CLKSEL2_PLL.CORE_CLK_SRC options (24XX) */
+#define CORE_CLK_SRC_32K		0
+#define CORE_CLK_SRC_DPLL		1
+#define CORE_CLK_SRC_DPLL_X2		2
+
+#endif
diff --git a/include/asm-arm/arch-omap/common.h b/arch/arm/plat-omap/include/mach/common.h
index 8ac03071f60c..06093112b665 100644
--- a/include/asm-arm/arch-omap/common.h
+++ b/arch/arm/plat-omap/include/mach/common.h
@@ -1,5 +1,5 @@
 /*
- * linux/include/asm-arm/arch-omap/common.h
+ * arch/arm/plat-omap/include/mach/common.h
  *
  * Header for code common to all OMAP machines.
  *
diff --git a/include/asm-arm/arch-omap/control.h b/arch/arm/plat-omap/include/mach/control.h
index 987553e3eeb9..e3fd62d9a995 100644
--- a/include/asm-arm/arch-omap/control.h
+++ b/arch/arm/plat-omap/include/mach/control.h
@@ -2,7 +2,7 @@
 #define __ASM_ARCH_CONTROL_H
 
 /*
- * include/asm-arm/arch-omap/control.h
+ * arch/arm/plat-omap/include/mach/control.h
  *
  * OMAP2/3 System Control Module definitions
  *
@@ -16,7 +16,7 @@
  * the Free Software Foundation.
  */
 
-#include <asm/arch/io.h>
+#include <mach/io.h>
 
 #define OMAP242X_CTRL_REGADDR(reg)					\
 	(void __iomem *)IO_ADDRESS(OMAP242X_CTRL_BASE + (reg))
diff --git a/arch/arm/plat-omap/include/mach/cpu.h b/arch/arm/plat-omap/include/mach/cpu.h
new file mode 100644
index 000000000000..05aee0eda34f
--- /dev/null
+++ b/arch/arm/plat-omap/include/mach/cpu.h
@@ -0,0 +1,402 @@
+/*
+ * arch/arm/plat-omap/include/mach/cpu.h
+ *
+ * OMAP cpu type detection
+ *
+ * Copyright (C) 2004, 2008 Nokia Corporation
+ *
+ * Written by Tony Lindgren <tony.lindgren@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ */
+
+#ifndef __ASM_ARCH_OMAP_CPU_H
+#define __ASM_ARCH_OMAP_CPU_H
+
+struct omap_chip_id {
+	u8 oc;
+};
+
+#define OMAP_CHIP_INIT(x)	{ .oc = x }
+
+extern unsigned int system_rev;
+
+#define omap2_cpu_rev()		((system_rev >> 12) & 0x0f)
+
+/*
+ * Test if multicore OMAP support is needed
+ */
+#undef MULTI_OMAP1
+#undef MULTI_OMAP2
+#undef OMAP_NAME
+
+#ifdef CONFIG_ARCH_OMAP730
+# ifdef OMAP_NAME
+#  undef  MULTI_OMAP1
+#  define MULTI_OMAP1
+# else
+#  define OMAP_NAME omap730
+# endif
+#endif
+#ifdef CONFIG_ARCH_OMAP15XX
+# ifdef OMAP_NAME
+#  undef  MULTI_OMAP1
+#  define MULTI_OMAP1
+# else
+#  define OMAP_NAME omap1510
+# endif
+#endif
+#ifdef CONFIG_ARCH_OMAP16XX
+# ifdef OMAP_NAME
+#  undef  MULTI_OMAP1
+#  define MULTI_OMAP1
+# else
+#  define OMAP_NAME omap16xx
+# endif
+#endif
+#if (defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX))
+# if (defined(OMAP_NAME) || defined(MULTI_OMAP1))
+#  error "OMAP1 and OMAP2 can't be selected at the same time"
+# endif
+#endif
+#ifdef CONFIG_ARCH_OMAP2420
+# ifdef OMAP_NAME
+#  undef  MULTI_OMAP2
+#  define MULTI_OMAP2
+# else
+#  define OMAP_NAME omap2420
+# endif
+#endif
+#ifdef CONFIG_ARCH_OMAP2430
+# ifdef OMAP_NAME
+#  undef  MULTI_OMAP2
+#  define MULTI_OMAP2
+# else
+#  define OMAP_NAME omap2430
+# endif
+#endif
+#ifdef CONFIG_ARCH_OMAP3430
+# ifdef OMAP_NAME
+#  undef  MULTI_OMAP2
+#  define MULTI_OMAP2
+# else
+#  define OMAP_NAME omap3430
+# endif
+#endif
+
+/*
+ * Macros to group OMAP into cpu classes.
+ * These can be used in most places.
+ * cpu_is_omap7xx():	True for OMAP730
+ * cpu_is_omap15xx():	True for OMAP1510, OMAP5910 and OMAP310
+ * cpu_is_omap16xx():	True for OMAP1610, OMAP5912 and OMAP1710
+ * cpu_is_omap24xx():	True for OMAP2420, OMAP2422, OMAP2423, OMAP2430
+ * cpu_is_omap242x():	True for OMAP2420, OMAP2422, OMAP2423
+ * cpu_is_omap243x():	True for OMAP2430
+ * cpu_is_omap343x():	True for OMAP3430
+ */
+#define GET_OMAP_CLASS	((system_rev >> 24) & 0xff)
+
+#define IS_OMAP_CLASS(class, id)			\
+static inline int is_omap ##class (void)		\
+{							\
+	return (GET_OMAP_CLASS == (id)) ? 1 : 0;	\
+}
+
+#define GET_OMAP_SUBCLASS	((system_rev >> 20) & 0x0fff)
+
+#define IS_OMAP_SUBCLASS(subclass, id)			\
+static inline int is_omap ##subclass (void)		\
+{							\
+	return (GET_OMAP_SUBCLASS == (id)) ? 1 : 0;	\
+}
+
+IS_OMAP_CLASS(7xx, 0x07)
+IS_OMAP_CLASS(15xx, 0x15)
+IS_OMAP_CLASS(16xx, 0x16)
+IS_OMAP_CLASS(24xx, 0x24)
+IS_OMAP_CLASS(34xx, 0x34)
+
+IS_OMAP_SUBCLASS(242x, 0x242)
+IS_OMAP_SUBCLASS(243x, 0x243)
+IS_OMAP_SUBCLASS(343x, 0x343)
+
+#define cpu_is_omap7xx()		0
+#define cpu_is_omap15xx()		0
+#define cpu_is_omap16xx()		0
+#define cpu_is_omap24xx()		0
+#define cpu_is_omap242x()		0
+#define cpu_is_omap243x()		0
+#define cpu_is_omap34xx()		0
+#define cpu_is_omap343x()		0
+
+#if defined(MULTI_OMAP1)
+# if defined(CONFIG_ARCH_OMAP730)
+#  undef  cpu_is_omap7xx
+#  define cpu_is_omap7xx()		is_omap7xx()
+# endif
+# if defined(CONFIG_ARCH_OMAP15XX)
+#  undef  cpu_is_omap15xx
+#  define cpu_is_omap15xx()		is_omap15xx()
+# endif
+# if defined(CONFIG_ARCH_OMAP16XX)
+#  undef  cpu_is_omap16xx
+#  define cpu_is_omap16xx()		is_omap16xx()
+# endif
+#else
+# if defined(CONFIG_ARCH_OMAP730)
+#  undef  cpu_is_omap7xx
+#  define cpu_is_omap7xx()		1
+# endif
+# if defined(CONFIG_ARCH_OMAP15XX)
+#  undef  cpu_is_omap15xx
+#  define cpu_is_omap15xx()		1
+# endif
+# if defined(CONFIG_ARCH_OMAP16XX)
+#  undef  cpu_is_omap16xx
+#  define cpu_is_omap16xx()		1
+# endif
+#endif
+
+#if defined(MULTI_OMAP2)
+# if defined(CONFIG_ARCH_OMAP24XX)
+#  undef  cpu_is_omap24xx
+#  undef  cpu_is_omap242x
+#  undef  cpu_is_omap243x
+#  define cpu_is_omap24xx()		is_omap24xx()
+#  define cpu_is_omap242x()		is_omap242x()
+#  define cpu_is_omap243x()		is_omap243x()
+# endif
+# if defined(CONFIG_ARCH_OMAP34XX)
+#  undef  cpu_is_omap34xx
+#  undef  cpu_is_omap343x
+#  define cpu_is_omap34xx()		is_omap34xx()
+#  define cpu_is_omap343x()		is_omap343x()
+# endif
+#else
+# if defined(CONFIG_ARCH_OMAP24XX)
+#  undef  cpu_is_omap24xx
+#  define cpu_is_omap24xx()		1
+# endif
+# if defined(CONFIG_ARCH_OMAP2420)
+#  undef  cpu_is_omap242x
+#  define cpu_is_omap242x()		1
+# endif
+# if defined(CONFIG_ARCH_OMAP2430)
+#  undef  cpu_is_omap243x
+#  define cpu_is_omap243x()		1
+# endif
+# if defined(CONFIG_ARCH_OMAP34XX)
+#  undef  cpu_is_omap34xx
+#  define cpu_is_omap34xx()		1
+# endif
+# if defined(CONFIG_ARCH_OMAP3430)
+#  undef  cpu_is_omap343x
+#  define cpu_is_omap343x()		1
+# endif
+#endif
+
+/*
+ * Macros to detect individual cpu types.
+ * These are only rarely needed.
+ * cpu_is_omap330():	True for OMAP330
+ * cpu_is_omap730():	True for OMAP730
+ * cpu_is_omap1510():	True for OMAP1510
+ * cpu_is_omap1610():	True for OMAP1610
+ * cpu_is_omap1611():	True for OMAP1611
+ * cpu_is_omap5912():	True for OMAP5912
+ * cpu_is_omap1621():	True for OMAP1621
+ * cpu_is_omap1710():	True for OMAP1710
+ * cpu_is_omap2420():	True for OMAP2420
+ * cpu_is_omap2422():	True for OMAP2422
+ * cpu_is_omap2423():	True for OMAP2423
+ * cpu_is_omap2430():	True for OMAP2430
+ * cpu_is_omap3430():	True for OMAP3430
+ */
+#define GET_OMAP_TYPE	((system_rev >> 16) & 0xffff)
+
+#define IS_OMAP_TYPE(type, id)				\
+static inline int is_omap ##type (void)			\
+{							\
+	return (GET_OMAP_TYPE == (id)) ? 1 : 0;		\
+}
+
+IS_OMAP_TYPE(310, 0x0310)
+IS_OMAP_TYPE(730, 0x0730)
+IS_OMAP_TYPE(1510, 0x1510)
+IS_OMAP_TYPE(1610, 0x1610)
+IS_OMAP_TYPE(1611, 0x1611)
+IS_OMAP_TYPE(5912, 0x1611)
+IS_OMAP_TYPE(1621, 0x1621)
+IS_OMAP_TYPE(1710, 0x1710)
+IS_OMAP_TYPE(2420, 0x2420)
+IS_OMAP_TYPE(2422, 0x2422)
+IS_OMAP_TYPE(2423, 0x2423)
+IS_OMAP_TYPE(2430, 0x2430)
+IS_OMAP_TYPE(3430, 0x3430)
+
+#define cpu_is_omap310()		0
+#define cpu_is_omap730()		0
+#define cpu_is_omap1510()		0
+#define cpu_is_omap1610()		0
+#define cpu_is_omap5912()		0
+#define cpu_is_omap1611()		0
+#define cpu_is_omap1621()		0
+#define cpu_is_omap1710()		0
+#define cpu_is_omap2420()		0
+#define cpu_is_omap2422()		0
+#define cpu_is_omap2423()		0
+#define cpu_is_omap2430()		0
+#define cpu_is_omap3430()		0
+
+#if defined(MULTI_OMAP1)
+# if defined(CONFIG_ARCH_OMAP730)
+#  undef  cpu_is_omap730
+#  define cpu_is_omap730()		is_omap730()
+# endif
+#else
+# if defined(CONFIG_ARCH_OMAP730)
+#  undef  cpu_is_omap730
+#  define cpu_is_omap730()		1
+# endif
+#endif
+
+/*
+ * Whether we have MULTI_OMAP1 or not, we still need to distinguish
+ * between 330 vs. 1510 and 1611B/5912 vs. 1710.
+ */
+#if defined(CONFIG_ARCH_OMAP15XX)
+# undef  cpu_is_omap310
+# undef  cpu_is_omap1510
+# define cpu_is_omap310()		is_omap310()
+# define cpu_is_omap1510()		is_omap1510()
+#endif
+
+#if defined(CONFIG_ARCH_OMAP16XX)
+# undef  cpu_is_omap1610
+# undef  cpu_is_omap1611
+# undef  cpu_is_omap5912
+# undef  cpu_is_omap1621
+# undef  cpu_is_omap1710
+# define cpu_is_omap1610()		is_omap1610()
+# define cpu_is_omap1611()		is_omap1611()
+# define cpu_is_omap5912()		is_omap5912()
+# define cpu_is_omap1621()		is_omap1621()
+# define cpu_is_omap1710()		is_omap1710()
+#endif
+
+#if defined(CONFIG_ARCH_OMAP24XX)
+# undef  cpu_is_omap2420
+# undef  cpu_is_omap2422
+# undef  cpu_is_omap2423
+# undef  cpu_is_omap2430
+# define cpu_is_omap2420()		is_omap2420()
+# define cpu_is_omap2422()		is_omap2422()
+# define cpu_is_omap2423()		is_omap2423()
+# define cpu_is_omap2430()		is_omap2430()
+#endif
+
+#if defined(CONFIG_ARCH_OMAP34XX)
+# undef cpu_is_omap3430
+# define cpu_is_omap3430()		is_omap3430()
+#endif
+
+/* Macros to detect if we have OMAP1 or OMAP2 */
+#define cpu_class_is_omap1()	(cpu_is_omap730() || cpu_is_omap15xx() || \
+				cpu_is_omap16xx())
+#define cpu_class_is_omap2()	(cpu_is_omap24xx() || cpu_is_omap34xx())
+
+#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
+/*
+ * Macros to detect silicon revision of OMAP2/3 processors.
+ * is_sil_rev_greater_than:	true if passed cpu type & its rev is greater.
+ * is_sil_rev_lesser_than:	true if passed cpu type & its rev is lesser.
+ * is_sil_rev_equal_to:		true if passed cpu type & its rev is equal.
+ * get_sil_rev:			return the silicon rev value.
+ */
+#define get_sil_omap_type(rev)	((rev & 0xffff0000) >> 16)
+#define get_sil_revision(rev)	((rev & 0x0000f000) >> 12)
+
+#define is_sil_rev_greater_than(rev) \
+		((get_sil_omap_type(system_rev) == get_sil_omap_type(rev)) && \
+		(get_sil_revision(system_rev) > get_sil_revision(rev)))
+
+#define is_sil_rev_less_than(rev) \
+		((get_sil_omap_type(system_rev) == get_sil_omap_type(rev)) && \
+		(get_sil_revision(system_rev) < get_sil_revision(rev)))
+
+#define is_sil_rev_equal_to(rev) \
+		((get_sil_omap_type(system_rev) == get_sil_omap_type(rev)) && \
+		(get_sil_revision(system_rev) == get_sil_revision(rev)))
+
+#define get_sil_rev() \
+		get_sil_revision(system_rev)
+
+/* Various silicon macros defined here */
+#define OMAP2420_REV_ES1_0	0x24200000
+#define OMAP2420_REV_ES2_0	0x24201000
+#define OMAP2430_REV_ES1_0	0x24300000
+#define OMAP3430_REV_ES1_0	0x34300000
+#define OMAP3430_REV_ES2_0	0x34301000
+#define OMAP3430_REV_ES2_1	0x34302000
+#define OMAP3430_REV_ES2_2	0x34303000
+
+/*
+ * omap_chip bits
+ *
+ * CHIP_IS_OMAP{2420,2430,3430} indicate that a particular structure is
+ * valid on all chips of that type.  CHIP_IS_OMAP3430ES{1,2} indicates
+ * something that is only valid on that particular ES revision.
+ *
+ * These bits may be ORed together to indicate structures that are
+ * available on multiple chip types.
+ *
+ * To test whether a particular structure matches the current OMAP chip type,
+ * use omap_chip_is().
+ *
+ */
+#define CHIP_IS_OMAP2420       (1 << 0)
+#define CHIP_IS_OMAP2430       (1 << 1)
+#define CHIP_IS_OMAP3430       (1 << 2)
+#define CHIP_IS_OMAP3430ES1    (1 << 3)
+#define CHIP_IS_OMAP3430ES2    (1 << 4)
+
+#define CHIP_IS_OMAP24XX       (CHIP_IS_OMAP2420 | CHIP_IS_OMAP2430)
+
+int omap_chip_is(struct omap_chip_id oci);
+
+
+/*
+ * Macro to detect device type i.e. EMU/HS/TST/GP/BAD
+ */
+#define DEVICE_TYPE_TEST	0
+#define DEVICE_TYPE_EMU		1
+#define DEVICE_TYPE_SEC		2
+#define DEVICE_TYPE_GP		3
+#define DEVICE_TYPE_BAD		4
+
+#define get_device_type()	((system_rev & 0x700) >> 8)
+#define is_device_type_test()	(get_device_type() == DEVICE_TYPE_TEST)
+#define is_device_type_emu()	(get_device_type() == DEVICE_TYPE_EMU)
+#define is_device_type_sec()	(get_device_type() == DEVICE_TYPE_SEC)
+#define is_device_type_gp()	(get_device_type() == DEVICE_TYPE_GP)
+#define is_device_type_bad()	(get_device_type() == DEVICE_TYPE_BAD)
+
+void omap2_check_revision(void);
+
+#endif    /* defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) */
+
+#endif
diff --git a/arch/arm/plat-omap/include/mach/debug-macro.S b/arch/arm/plat-omap/include/mach/debug-macro.S
new file mode 100644
index 000000000000..1b0039bdeb4e
--- /dev/null
+++ b/arch/arm/plat-omap/include/mach/debug-macro.S
@@ -0,0 +1,58 @@
+/* arch/arm/plat-omap/include/mach/debug-macro.S
+ *
+ * Debugging macro include header
+ *
+ *  Copyright (C) 1994-1999 Russell King
+ *  Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+*/
+
+		.macro	addruart,rx
+		mrc	p15, 0, \rx, c1, c0
+		tst	\rx, #1			@ MMU enabled?
+#ifdef CONFIG_ARCH_OMAP1
+		moveq	\rx, #0xff000000	@ physical base address
+		movne	\rx, #0xfe000000	@ virtual base
+		orr	\rx, \rx, #0x00fb0000
+#ifdef CONFIG_OMAP_LL_DEBUG_UART3
+		orr	\rx, \rx, #0x00009000	@ UART 3
+#endif
+#if defined(CONFIG_OMAP_LL_DEBUG_UART2) || defined(CONFIG_OMAP_LL_DEBUG_UART3)
+		orr	\rx, \rx, #0x00000800	@ UART 2 & 3
+#endif
+
+#elif  CONFIG_ARCH_OMAP2
+		moveq	\rx, #0x48000000	@ physical base address
+		movne	\rx, #0xd8000000	@ virtual base
+		orr	\rx, \rx, #0x0006a000
+#ifdef CONFIG_OMAP_LL_DEBUG_UART2
+		add	\rx, \rx, #0x00002000	@ UART 2
+#endif
+#ifdef CONFIG_OMAP_LL_DEBUG_UART3
+		add	\rx, \rx, #0x00004000	@ UART 3
+#endif
+#endif
+		.endm
+
+		.macro	senduart,rd,rx
+		strb	\rd, [\rx]
+		.endm
+
+		.macro	busyuart,rd,rx
+1001:		ldrb	\rd, [\rx, #(0x5 << 2)]	@ OMAP-1510 and friends
+		and	\rd, \rd, #0x60
+		teq	\rd, #0x60
+		beq	1002f
+		ldrb	\rd, [\rx, #(0x5 << 0)]	@ OMAP-730 only
+		and	\rd, \rd, #0x60
+		teq	\rd, #0x60
+		bne	1001b
+1002:
+		.endm
+
+		.macro	waituart,rd,rx
+		.endm
diff --git a/arch/arm/plat-omap/include/mach/dma.h b/arch/arm/plat-omap/include/mach/dma.h
new file mode 100644
index 000000000000..54fe9665b182
--- /dev/null
+++ b/arch/arm/plat-omap/include/mach/dma.h
@@ -0,0 +1,570 @@
+/*
+ *  arch/arm/plat-omap/include/mach/dma.h
+ *
+ *  Copyright (C) 2003 Nokia Corporation
+ *  Author: Juha Yrjölä <juha.yrjola@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+#ifndef __ASM_ARCH_DMA_H
+#define __ASM_ARCH_DMA_H
+
+/* Hardware registers for omap1 */
+#define OMAP1_DMA_BASE			(0xfffed800)
+
+#define OMAP1_DMA_GCR			0x400
+#define OMAP1_DMA_GSCR			0x404
+#define OMAP1_DMA_GRST			0x408
+#define OMAP1_DMA_HW_ID			0x442
+#define OMAP1_DMA_PCH2_ID		0x444
+#define OMAP1_DMA_PCH0_ID		0x446
+#define OMAP1_DMA_PCH1_ID		0x448
+#define OMAP1_DMA_PCHG_ID		0x44a
+#define OMAP1_DMA_PCHD_ID		0x44c
+#define OMAP1_DMA_CAPS_0_U		0x44e
+#define OMAP1_DMA_CAPS_0_L		0x450
+#define OMAP1_DMA_CAPS_1_U		0x452
+#define OMAP1_DMA_CAPS_1_L		0x454
+#define OMAP1_DMA_CAPS_2		0x456
+#define OMAP1_DMA_CAPS_3		0x458
+#define OMAP1_DMA_CAPS_4		0x45a
+#define OMAP1_DMA_PCH2_SR		0x460
+#define OMAP1_DMA_PCH0_SR		0x480
+#define OMAP1_DMA_PCH1_SR		0x482
+#define OMAP1_DMA_PCHD_SR		0x4c0
+
+/* Hardware registers for omap2 and omap3 */
+#define OMAP24XX_DMA4_BASE		(L4_24XX_BASE + 0x56000)
+#define OMAP34XX_DMA4_BASE		(L4_34XX_BASE + 0x56000)
+
+#define OMAP_DMA4_REVISION		0x00
+#define OMAP_DMA4_GCR			0x78
+#define OMAP_DMA4_IRQSTATUS_L0		0x08
+#define OMAP_DMA4_IRQSTATUS_L1		0x0c
+#define OMAP_DMA4_IRQSTATUS_L2		0x10
+#define OMAP_DMA4_IRQSTATUS_L3		0x14
+#define OMAP_DMA4_IRQENABLE_L0		0x18
+#define OMAP_DMA4_IRQENABLE_L1		0x1c
+#define OMAP_DMA4_IRQENABLE_L2		0x20
+#define OMAP_DMA4_IRQENABLE_L3		0x24
+#define OMAP_DMA4_SYSSTATUS		0x28
+#define OMAP_DMA4_OCP_SYSCONFIG		0x2c
+#define OMAP_DMA4_CAPS_0		0x64
+#define OMAP_DMA4_CAPS_2		0x6c
+#define OMAP_DMA4_CAPS_3		0x70
+#define OMAP_DMA4_CAPS_4		0x74
+
+#define OMAP1_LOGICAL_DMA_CH_COUNT	17
+#define OMAP_DMA4_LOGICAL_DMA_CH_COUNT	32	/* REVISIT: Is this 32 + 2? */
+
+/* Common channel specific registers for omap1 */
+#define OMAP1_DMA_CH_BASE(n)		(0x40 * (n) + 0x00)
+#define OMAP1_DMA_CSDP(n)		(0x40 * (n) + 0x00)
+#define OMAP1_DMA_CCR(n)		(0x40 * (n) + 0x02)
+#define OMAP1_DMA_CICR(n)		(0x40 * (n) + 0x04)
+#define OMAP1_DMA_CSR(n)		(0x40 * (n) + 0x06)
+#define OMAP1_DMA_CEN(n)		(0x40 * (n) + 0x10)
+#define OMAP1_DMA_CFN(n)		(0x40 * (n) + 0x12)
+#define OMAP1_DMA_CSFI(n)		(0x40 * (n) + 0x14)
+#define OMAP1_DMA_CSEI(n)		(0x40 * (n) + 0x16)
+#define OMAP1_DMA_CPC(n)		(0x40 * (n) + 0x18)	/* 15xx only */
+#define OMAP1_DMA_CSAC(n)		(0x40 * (n) + 0x18)
+#define OMAP1_DMA_CDAC(n)		(0x40 * (n) + 0x1a)
+#define OMAP1_DMA_CDEI(n)		(0x40 * (n) + 0x1c)
+#define OMAP1_DMA_CDFI(n)		(0x40 * (n) + 0x1e)
+#define OMAP1_DMA_CLNK_CTRL(n)		(0x40 * (n) + 0x28)
+
+/* Common channel specific registers for omap2 */
+#define OMAP_DMA4_CH_BASE(n)		(0x60 * (n) + 0x80)
+#define OMAP_DMA4_CCR(n)		(0x60 * (n) + 0x80)
+#define OMAP_DMA4_CLNK_CTRL(n)		(0x60 * (n) + 0x84)
+#define OMAP_DMA4_CICR(n)		(0x60 * (n) + 0x88)
+#define OMAP_DMA4_CSR(n)		(0x60 * (n) + 0x8c)
+#define OMAP_DMA4_CSDP(n)		(0x60 * (n) + 0x90)
+#define OMAP_DMA4_CEN(n)		(0x60 * (n) + 0x94)
+#define OMAP_DMA4_CFN(n)		(0x60 * (n) + 0x98)
+#define OMAP_DMA4_CSEI(n)		(0x60 * (n) + 0xa4)
+#define OMAP_DMA4_CSFI(n)		(0x60 * (n) + 0xa8)
+#define OMAP_DMA4_CDEI(n)		(0x60 * (n) + 0xac)
+#define OMAP_DMA4_CDFI(n)		(0x60 * (n) + 0xb0)
+#define OMAP_DMA4_CSAC(n)		(0x60 * (n) + 0xb4)
+#define OMAP_DMA4_CDAC(n)		(0x60 * (n) + 0xb8)
+
+/* Channel specific registers only on omap1 */
+#define OMAP1_DMA_CSSA_L(n)		(0x40 * (n) + 0x08)
+#define OMAP1_DMA_CSSA_U(n)		(0x40 * (n) + 0x0a)
+#define OMAP1_DMA_CDSA_L(n)		(0x40 * (n) + 0x0c)
+#define OMAP1_DMA_CDSA_U(n)		(0x40 * (n) + 0x0e)
+#define OMAP1_DMA_COLOR_L(n)		(0x40 * (n) + 0x20)
+#define OMAP1_DMA_COLOR_U(n)		(0x40 * (n) + 0x22)
+#define OMAP1_DMA_CCR2(n)		(0x40 * (n) + 0x24)
+#define OMAP1_DMA_LCH_CTRL(n)		(0x40 * (n) + 0x2a)	/* not on 15xx */
+#define OMAP1_DMA_CCEN(n)		0
+#define OMAP1_DMA_CCFN(n)		0
+
+/* Channel specific registers only on omap2 */
+#define OMAP_DMA4_CSSA(n)		(0x60 * (n) + 0x9c)
+#define OMAP_DMA4_CDSA(n)		(0x60 * (n) + 0xa0)
+#define OMAP_DMA4_CCEN(n)		(0x60 * (n) + 0xbc)
+#define OMAP_DMA4_CCFN(n)		(0x60 * (n) + 0xc0)
+#define OMAP_DMA4_COLOR(n)		(0x60 * (n) + 0xc4)
+
+/* Dummy defines to keep multi-omap compiles happy */
+#define OMAP1_DMA_REVISION		0
+#define OMAP1_DMA_IRQSTATUS_L0		0
+#define OMAP1_DMA_IRQENABLE_L0		0
+#define OMAP1_DMA_OCP_SYSCONFIG		0
+#define OMAP_DMA4_HW_ID			0
+#define OMAP_DMA4_CAPS_0_L		0
+#define OMAP_DMA4_CAPS_0_U		0
+#define OMAP_DMA4_CAPS_1_L		0
+#define OMAP_DMA4_CAPS_1_U		0
+#define OMAP_DMA4_GSCR			0
+#define OMAP_DMA4_CPC(n)		0
+
+#define OMAP_DMA4_LCH_CTRL(n)		0
+#define OMAP_DMA4_COLOR_L(n)		0
+#define OMAP_DMA4_COLOR_U(n)		0
+#define OMAP_DMA4_CCR2(n)		0
+#define OMAP1_DMA_CSSA(n)		0
+#define OMAP1_DMA_CDSA(n)		0
+#define OMAP_DMA4_CSSA_L(n)		0
+#define OMAP_DMA4_CSSA_U(n)		0
+#define OMAP_DMA4_CDSA_L(n)		0
+#define OMAP_DMA4_CDSA_U(n)		0
+
+/*----------------------------------------------------------------------------*/
+
+/* DMA channels for omap1 */
+#define OMAP_DMA_NO_DEVICE		0
+#define OMAP_DMA_MCSI1_TX		1
+#define OMAP_DMA_MCSI1_RX		2
+#define OMAP_DMA_I2C_RX			3
+#define OMAP_DMA_I2C_TX			4
+#define OMAP_DMA_EXT_NDMA_REQ		5
+#define OMAP_DMA_EXT_NDMA_REQ2		6
+#define OMAP_DMA_UWIRE_TX		7
+#define OMAP_DMA_MCBSP1_TX		8
+#define OMAP_DMA_MCBSP1_RX		9
+#define OMAP_DMA_MCBSP3_TX		10
+#define OMAP_DMA_MCBSP3_RX		11
+#define OMAP_DMA_UART1_TX		12
+#define OMAP_DMA_UART1_RX		13
+#define OMAP_DMA_UART2_TX		14
+#define OMAP_DMA_UART2_RX		15
+#define OMAP_DMA_MCBSP2_TX		16
+#define OMAP_DMA_MCBSP2_RX		17
+#define OMAP_DMA_UART3_TX		18
+#define OMAP_DMA_UART3_RX		19
+#define OMAP_DMA_CAMERA_IF_RX		20
+#define OMAP_DMA_MMC_TX			21
+#define OMAP_DMA_MMC_RX			22
+#define OMAP_DMA_NAND			23
+#define OMAP_DMA_IRQ_LCD_LINE		24
+#define OMAP_DMA_MEMORY_STICK		25
+#define OMAP_DMA_USB_W2FC_RX0		26
+#define OMAP_DMA_USB_W2FC_RX1		27
+#define OMAP_DMA_USB_W2FC_RX2		28
+#define OMAP_DMA_USB_W2FC_TX0		29
+#define OMAP_DMA_USB_W2FC_TX1		30
+#define OMAP_DMA_USB_W2FC_TX2		31
+
+/* These are only for 1610 */
+#define OMAP_DMA_CRYPTO_DES_IN		32
+#define OMAP_DMA_SPI_TX			33
+#define OMAP_DMA_SPI_RX			34
+#define OMAP_DMA_CRYPTO_HASH		35
+#define OMAP_DMA_CCP_ATTN		36
+#define OMAP_DMA_CCP_FIFO_NOT_EMPTY	37
+#define OMAP_DMA_CMT_APE_TX_CHAN_0	38
+#define OMAP_DMA_CMT_APE_RV_CHAN_0	39
+#define OMAP_DMA_CMT_APE_TX_CHAN_1	40
+#define OMAP_DMA_CMT_APE_RV_CHAN_1	41
+#define OMAP_DMA_CMT_APE_TX_CHAN_2	42
+#define OMAP_DMA_CMT_APE_RV_CHAN_2	43
+#define OMAP_DMA_CMT_APE_TX_CHAN_3	44
+#define OMAP_DMA_CMT_APE_RV_CHAN_3	45
+#define OMAP_DMA_CMT_APE_TX_CHAN_4	46
+#define OMAP_DMA_CMT_APE_RV_CHAN_4	47
+#define OMAP_DMA_CMT_APE_TX_CHAN_5	48
+#define OMAP_DMA_CMT_APE_RV_CHAN_5	49
+#define OMAP_DMA_CMT_APE_TX_CHAN_6	50
+#define OMAP_DMA_CMT_APE_RV_CHAN_6	51
+#define OMAP_DMA_CMT_APE_TX_CHAN_7	52
+#define OMAP_DMA_CMT_APE_RV_CHAN_7	53
+#define OMAP_DMA_MMC2_TX		54
+#define OMAP_DMA_MMC2_RX		55
+#define OMAP_DMA_CRYPTO_DES_OUT		56
+
+/* DMA channels for 24xx */
+#define OMAP24XX_DMA_NO_DEVICE		0
+#define OMAP24XX_DMA_XTI_DMA		1	/* S_DMA_0 */
+#define OMAP24XX_DMA_EXT_DMAREQ0	2	/* S_DMA_1 */
+#define OMAP24XX_DMA_EXT_DMAREQ1	3	/* S_DMA_2 */
+#define OMAP24XX_DMA_GPMC		4	/* S_DMA_3 */
+#define OMAP24XX_DMA_GFX		5	/* S_DMA_4 */
+#define OMAP24XX_DMA_DSS		6	/* S_DMA_5 */
+#define OMAP242X_DMA_VLYNQ_TX		7	/* S_DMA_6 */
+#define OMAP24XX_DMA_EXT_DMAREQ2	7	/* S_DMA_6 */
+#define OMAP24XX_DMA_CWT		8	/* S_DMA_7 */
+#define OMAP24XX_DMA_AES_TX		9	/* S_DMA_8 */
+#define OMAP24XX_DMA_AES_RX		10	/* S_DMA_9 */
+#define OMAP24XX_DMA_DES_TX		11	/* S_DMA_10 */
+#define OMAP24XX_DMA_DES_RX		12	/* S_DMA_11 */
+#define OMAP24XX_DMA_SHA1MD5_RX		13	/* S_DMA_12 */
+#define OMAP34XX_DMA_SHA2MD5_RX		13	/* S_DMA_12 */
+#define OMAP242X_DMA_EXT_DMAREQ2	14	/* S_DMA_13 */
+#define OMAP242X_DMA_EXT_DMAREQ3	15	/* S_DMA_14 */
+#define OMAP242X_DMA_EXT_DMAREQ4	16	/* S_DMA_15 */
+#define OMAP242X_DMA_EAC_AC_RD		17	/* S_DMA_16 */
+#define OMAP242X_DMA_EAC_AC_WR		18	/* S_DMA_17 */
+#define OMAP242X_DMA_EAC_MD_UL_RD	19	/* S_DMA_18 */
+#define OMAP242X_DMA_EAC_MD_UL_WR	20	/* S_DMA_19 */
+#define OMAP242X_DMA_EAC_MD_DL_RD	21	/* S_DMA_20 */
+#define OMAP242X_DMA_EAC_MD_DL_WR	22	/* S_DMA_21 */
+#define OMAP242X_DMA_EAC_BT_UL_RD	23	/* S_DMA_22 */
+#define OMAP242X_DMA_EAC_BT_UL_WR	24	/* S_DMA_23 */
+#define OMAP242X_DMA_EAC_BT_DL_RD	25	/* S_DMA_24 */
+#define OMAP242X_DMA_EAC_BT_DL_WR	26	/* S_DMA_25 */
+#define OMAP243X_DMA_EXT_DMAREQ3	14	/* S_DMA_13 */
+#define OMAP24XX_DMA_SPI3_TX0		15	/* S_DMA_14 */
+#define OMAP24XX_DMA_SPI3_RX0		16	/* S_DMA_15 */
+#define OMAP24XX_DMA_MCBSP3_TX		17	/* S_DMA_16 */
+#define OMAP24XX_DMA_MCBSP3_RX		18	/* S_DMA_17 */
+#define OMAP24XX_DMA_MCBSP4_TX		19	/* S_DMA_18 */
+#define OMAP24XX_DMA_MCBSP4_RX		20	/* S_DMA_19 */
+#define OMAP24XX_DMA_MCBSP5_TX		21	/* S_DMA_20 */
+#define OMAP24XX_DMA_MCBSP5_RX		22	/* S_DMA_21 */
+#define OMAP24XX_DMA_SPI3_TX1		23	/* S_DMA_22 */
+#define OMAP24XX_DMA_SPI3_RX1		24	/* S_DMA_23 */
+#define OMAP243X_DMA_EXT_DMAREQ4	25	/* S_DMA_24 */
+#define OMAP243X_DMA_EXT_DMAREQ5	26	/* S_DMA_25 */
+#define OMAP34XX_DMA_I2C3_TX		25	/* S_DMA_24 */
+#define OMAP34XX_DMA_I2C3_RX		26	/* S_DMA_25 */
+#define OMAP24XX_DMA_I2C1_TX		27	/* S_DMA_26 */
+#define OMAP24XX_DMA_I2C1_RX		28	/* S_DMA_27 */
+#define OMAP24XX_DMA_I2C2_TX		29	/* S_DMA_28 */
+#define OMAP24XX_DMA_I2C2_RX		30	/* S_DMA_29 */
+#define OMAP24XX_DMA_MCBSP1_TX		31	/* S_DMA_30 */
+#define OMAP24XX_DMA_MCBSP1_RX		32	/* S_DMA_31 */
+#define OMAP24XX_DMA_MCBSP2_TX		33	/* S_DMA_32 */
+#define OMAP24XX_DMA_MCBSP2_RX		34	/* S_DMA_33 */
+#define OMAP24XX_DMA_SPI1_TX0		35	/* S_DMA_34 */
+#define OMAP24XX_DMA_SPI1_RX0		36	/* S_DMA_35 */
+#define OMAP24XX_DMA_SPI1_TX1		37	/* S_DMA_36 */
+#define OMAP24XX_DMA_SPI1_RX1		38	/* S_DMA_37 */
+#define OMAP24XX_DMA_SPI1_TX2		39	/* S_DMA_38 */
+#define OMAP24XX_DMA_SPI1_RX2		40	/* S_DMA_39 */
+#define OMAP24XX_DMA_SPI1_TX3		41	/* S_DMA_40 */
+#define OMAP24XX_DMA_SPI1_RX3		42	/* S_DMA_41 */
+#define OMAP24XX_DMA_SPI2_TX0		43	/* S_DMA_42 */
+#define OMAP24XX_DMA_SPI2_RX0		44	/* S_DMA_43 */
+#define OMAP24XX_DMA_SPI2_TX1		45	/* S_DMA_44 */
+#define OMAP24XX_DMA_SPI2_RX1		46	/* S_DMA_45 */
+#define OMAP24XX_DMA_MMC2_TX		47	/* S_DMA_46 */
+#define OMAP24XX_DMA_MMC2_RX		48	/* S_DMA_47 */
+#define OMAP24XX_DMA_UART1_TX		49	/* S_DMA_48 */
+#define OMAP24XX_DMA_UART1_RX		50	/* S_DMA_49 */
+#define OMAP24XX_DMA_UART2_TX		51	/* S_DMA_50 */
+#define OMAP24XX_DMA_UART2_RX		52	/* S_DMA_51 */
+#define OMAP24XX_DMA_UART3_TX		53	/* S_DMA_52 */
+#define OMAP24XX_DMA_UART3_RX		54	/* S_DMA_53 */
+#define OMAP24XX_DMA_USB_W2FC_TX0	55	/* S_DMA_54 */
+#define OMAP24XX_DMA_USB_W2FC_RX0	56	/* S_DMA_55 */
+#define OMAP24XX_DMA_USB_W2FC_TX1	57	/* S_DMA_56 */
+#define OMAP24XX_DMA_USB_W2FC_RX1	58	/* S_DMA_57 */
+#define OMAP24XX_DMA_USB_W2FC_TX2	59	/* S_DMA_58 */
+#define OMAP24XX_DMA_USB_W2FC_RX2	60	/* S_DMA_59 */
+#define OMAP24XX_DMA_MMC1_TX		61	/* S_DMA_60 */
+#define OMAP24XX_DMA_MMC1_RX		62	/* S_DMA_61 */
+#define OMAP24XX_DMA_MS			63	/* S_DMA_62 */
+#define OMAP242X_DMA_EXT_DMAREQ5	64	/* S_DMA_63 */
+#define OMAP243X_DMA_EXT_DMAREQ6	64	/* S_DMA_63 */
+#define OMAP34XX_DMA_EXT_DMAREQ3	64	/* S_DMA_63 */
+#define OMAP34XX_DMA_AES2_TX		65	/* S_DMA_64 */
+#define OMAP34XX_DMA_AES2_RX		66	/* S_DMA_65 */
+#define OMAP34XX_DMA_DES2_TX		67	/* S_DMA_66 */
+#define OMAP34XX_DMA_DES2_RX		68	/* S_DMA_67 */
+#define OMAP34XX_DMA_SHA1MD5_RX		69	/* S_DMA_68 */
+#define OMAP34XX_DMA_SPI4_TX0		70	/* S_DMA_69 */
+#define OMAP34XX_DMA_SPI4_RX0		71	/* S_DMA_70 */
+#define OMAP34XX_DSS_DMA0		72	/* S_DMA_71 */
+#define OMAP34XX_DSS_DMA1		73	/* S_DMA_72 */
+#define OMAP34XX_DSS_DMA2		74	/* S_DMA_73 */
+#define OMAP34XX_DSS_DMA3		75	/* S_DMA_74 */
+#define OMAP34XX_DMA_MMC3_TX		77	/* S_DMA_76 */
+#define OMAP34XX_DMA_MMC3_RX		78	/* S_DMA_77 */
+#define OMAP34XX_DMA_USIM_TX		79	/* S_DMA_78 */
+#define OMAP34XX_DMA_USIM_RX		80	/* S_DMA_79 */
+
+/*----------------------------------------------------------------------------*/
+
+/* Hardware registers for LCD DMA */
+#define OMAP1510_DMA_LCD_BASE		(0xfffedb00)
+#define OMAP1510_DMA_LCD_CTRL		(OMAP1510_DMA_LCD_BASE + 0x00)
+#define OMAP1510_DMA_LCD_TOP_F1_L	(OMAP1510_DMA_LCD_BASE + 0x02)
+#define OMAP1510_DMA_LCD_TOP_F1_U	(OMAP1510_DMA_LCD_BASE + 0x04)
+#define OMAP1510_DMA_LCD_BOT_F1_L	(OMAP1510_DMA_LCD_BASE + 0x06)
+#define OMAP1510_DMA_LCD_BOT_F1_U	(OMAP1510_DMA_LCD_BASE + 0x08)
+
+#define OMAP1610_DMA_LCD_BASE		(0xfffee300)
+#define OMAP1610_DMA_LCD_CSDP		(OMAP1610_DMA_LCD_BASE + 0xc0)
+#define OMAP1610_DMA_LCD_CCR		(OMAP1610_DMA_LCD_BASE + 0xc2)
+#define OMAP1610_DMA_LCD_CTRL		(OMAP1610_DMA_LCD_BASE + 0xc4)
+#define OMAP1610_DMA_LCD_TOP_B1_L	(OMAP1610_DMA_LCD_BASE + 0xc8)
+#define OMAP1610_DMA_LCD_TOP_B1_U	(OMAP1610_DMA_LCD_BASE + 0xca)
+#define OMAP1610_DMA_LCD_BOT_B1_L	(OMAP1610_DMA_LCD_BASE + 0xcc)
+#define OMAP1610_DMA_LCD_BOT_B1_U	(OMAP1610_DMA_LCD_BASE + 0xce)
+#define OMAP1610_DMA_LCD_TOP_B2_L	(OMAP1610_DMA_LCD_BASE + 0xd0)
+#define OMAP1610_DMA_LCD_TOP_B2_U	(OMAP1610_DMA_LCD_BASE + 0xd2)
+#define OMAP1610_DMA_LCD_BOT_B2_L	(OMAP1610_DMA_LCD_BASE + 0xd4)
+#define OMAP1610_DMA_LCD_BOT_B2_U	(OMAP1610_DMA_LCD_BASE + 0xd6)
+#define OMAP1610_DMA_LCD_SRC_EI_B1	(OMAP1610_DMA_LCD_BASE + 0xd8)
+#define OMAP1610_DMA_LCD_SRC_FI_B1_L	(OMAP1610_DMA_LCD_BASE + 0xda)
+#define OMAP1610_DMA_LCD_SRC_EN_B1	(OMAP1610_DMA_LCD_BASE + 0xe0)
+#define OMAP1610_DMA_LCD_SRC_FN_B1	(OMAP1610_DMA_LCD_BASE + 0xe4)
+#define OMAP1610_DMA_LCD_LCH_CTRL	(OMAP1610_DMA_LCD_BASE + 0xea)
+#define OMAP1610_DMA_LCD_SRC_FI_B1_U	(OMAP1610_DMA_LCD_BASE + 0xf4)
+
+#define OMAP1_DMA_TOUT_IRQ		(1 << 0)
+#define OMAP_DMA_DROP_IRQ		(1 << 1)
+#define OMAP_DMA_HALF_IRQ		(1 << 2)
+#define OMAP_DMA_FRAME_IRQ		(1 << 3)
+#define OMAP_DMA_LAST_IRQ		(1 << 4)
+#define OMAP_DMA_BLOCK_IRQ		(1 << 5)
+#define OMAP1_DMA_SYNC_IRQ		(1 << 6)
+#define OMAP2_DMA_PKT_IRQ		(1 << 7)
+#define OMAP2_DMA_TRANS_ERR_IRQ		(1 << 8)
+#define OMAP2_DMA_SECURE_ERR_IRQ	(1 << 9)
+#define OMAP2_DMA_SUPERVISOR_ERR_IRQ	(1 << 10)
+#define OMAP2_DMA_MISALIGNED_ERR_IRQ	(1 << 11)
+
+#define OMAP_DMA_DATA_TYPE_S8		0x00
+#define OMAP_DMA_DATA_TYPE_S16		0x01
+#define OMAP_DMA_DATA_TYPE_S32		0x02
+
+#define OMAP_DMA_SYNC_ELEMENT		0x00
+#define OMAP_DMA_SYNC_FRAME		0x01
+#define OMAP_DMA_SYNC_BLOCK		0x02
+#define OMAP_DMA_SYNC_PACKET		0x03
+
+#define OMAP_DMA_SRC_SYNC		0x01
+#define OMAP_DMA_DST_SYNC		0x00
+
+#define OMAP_DMA_PORT_EMIFF		0x00
+#define OMAP_DMA_PORT_EMIFS		0x01
+#define OMAP_DMA_PORT_OCP_T1		0x02
+#define OMAP_DMA_PORT_TIPB		0x03
+#define OMAP_DMA_PORT_OCP_T2		0x04
+#define OMAP_DMA_PORT_MPUI		0x05
+
+#define OMAP_DMA_AMODE_CONSTANT		0x00
+#define OMAP_DMA_AMODE_POST_INC		0x01
+#define OMAP_DMA_AMODE_SINGLE_IDX	0x02
+#define OMAP_DMA_AMODE_DOUBLE_IDX	0x03
+
+#define DMA_DEFAULT_FIFO_DEPTH		0x10
+#define DMA_DEFAULT_ARB_RATE		0x01
+/* Pass THREAD_RESERVE ORed with THREAD_FIFO for tparams */
+#define DMA_THREAD_RESERVE_NORM		(0x00 << 12) /* Def */
+#define DMA_THREAD_RESERVE_ONET		(0x01 << 12)
+#define DMA_THREAD_RESERVE_TWOT		(0x02 << 12)
+#define DMA_THREAD_RESERVE_THREET	(0x03 << 12)
+#define DMA_THREAD_FIFO_NONE		(0x00 << 14) /* Def */
+#define DMA_THREAD_FIFO_75		(0x01 << 14)
+#define DMA_THREAD_FIFO_25		(0x02 << 14)
+#define DMA_THREAD_FIFO_50		(0x03 << 14)
+
+/* Chaining modes*/
+#ifndef CONFIG_ARCH_OMAP1
+#define OMAP_DMA_STATIC_CHAIN		0x1
+#define OMAP_DMA_DYNAMIC_CHAIN		0x2
+#define OMAP_DMA_CHAIN_ACTIVE		0x1
+#define OMAP_DMA_CHAIN_INACTIVE		0x0
+#endif
+
+#define DMA_CH_PRIO_HIGH		0x1
+#define DMA_CH_PRIO_LOW			0x0 /* Def */
+
+/* LCD DMA block numbers */
+enum {
+	OMAP_LCD_DMA_B1_TOP,
+	OMAP_LCD_DMA_B1_BOTTOM,
+	OMAP_LCD_DMA_B2_TOP,
+	OMAP_LCD_DMA_B2_BOTTOM
+};
+
+enum omap_dma_burst_mode {
+	OMAP_DMA_DATA_BURST_DIS = 0,
+	OMAP_DMA_DATA_BURST_4,
+	OMAP_DMA_DATA_BURST_8,
+	OMAP_DMA_DATA_BURST_16,
+};
+
+enum end_type {
+	OMAP_DMA_LITTLE_ENDIAN = 0,
+	OMAP_DMA_BIG_ENDIAN
+};
+
+enum omap_dma_color_mode {
+	OMAP_DMA_COLOR_DIS = 0,
+	OMAP_DMA_CONSTANT_FILL,
+	OMAP_DMA_TRANSPARENT_COPY
+};
+
+enum omap_dma_write_mode {
+	OMAP_DMA_WRITE_NON_POSTED = 0,
+	OMAP_DMA_WRITE_POSTED,
+	OMAP_DMA_WRITE_LAST_NON_POSTED
+};
+
+enum omap_dma_channel_mode {
+	OMAP_DMA_LCH_2D = 0,
+	OMAP_DMA_LCH_G,
+	OMAP_DMA_LCH_P,
+	OMAP_DMA_LCH_PD
+};
+
+struct omap_dma_channel_params {
+	int data_type;		/* data type 8,16,32 */
+	int elem_count;		/* number of elements in a frame */
+	int frame_count;	/* number of frames in a element */
+
+	int src_port;		/* Only on OMAP1 REVISIT: Is this needed? */
+	int src_amode;		/* constant, post increment, indexed,
+					double indexed */
+	unsigned long src_start;	/* source address : physical */
+	int src_ei;		/* source element index */
+	int src_fi;		/* source frame index */
+
+	int dst_port;		/* Only on OMAP1 REVISIT: Is this needed? */
+	int dst_amode;		/* constant, post increment, indexed,
+					double indexed */
+	unsigned long dst_start;	/* source address : physical */
+	int dst_ei;		/* source element index */
+	int dst_fi;		/* source frame index */
+
+	int trigger;		/* trigger attached if the channel is
+					synchronized */
+	int sync_mode;		/* sycn on element, frame , block or packet */
+	int src_or_dst_synch;	/* source synch(1) or destination synch(0) */
+
+	int ie;			/* interrupt enabled */
+
+	unsigned char read_prio;/* read priority */
+	unsigned char write_prio;/* write priority */
+
+#ifndef CONFIG_ARCH_OMAP1
+	enum omap_dma_burst_mode burst_mode; /* Burst mode 4/8/16 words */
+#endif
+};
+
+
+extern void omap_set_dma_priority(int lch, int dst_port, int priority);
+extern int omap_request_dma(int dev_id, const char *dev_name,
+			void (*callback)(int lch, u16 ch_status, void *data),
+			void *data, int *dma_ch);
+extern void omap_enable_dma_irq(int ch, u16 irq_bits);
+extern void omap_disable_dma_irq(int ch, u16 irq_bits);
+extern void omap_free_dma(int ch);
+extern void omap_start_dma(int lch);
+extern void omap_stop_dma(int lch);
+extern void omap_set_dma_transfer_params(int lch, int data_type,
+					 int elem_count, int frame_count,
+					 int sync_mode,
+					 int dma_trigger, int src_or_dst_synch);
+extern void omap_set_dma_color_mode(int lch, enum omap_dma_color_mode mode,
+				    u32 color);
+extern void omap_set_dma_write_mode(int lch, enum omap_dma_write_mode mode);
+extern void omap_set_dma_channel_mode(int lch, enum omap_dma_channel_mode mode);
+
+extern void omap_set_dma_src_params(int lch, int src_port, int src_amode,
+				    unsigned long src_start,
+				    int src_ei, int src_fi);
+extern void omap_set_dma_src_index(int lch, int eidx, int fidx);
+extern void omap_set_dma_src_data_pack(int lch, int enable);
+extern void omap_set_dma_src_burst_mode(int lch,
+					enum omap_dma_burst_mode burst_mode);
+
+extern void omap_set_dma_dest_params(int lch, int dest_port, int dest_amode,
+				     unsigned long dest_start,
+				     int dst_ei, int dst_fi);
+extern void omap_set_dma_dest_index(int lch, int eidx, int fidx);
+extern void omap_set_dma_dest_data_pack(int lch, int enable);
+extern void omap_set_dma_dest_burst_mode(int lch,
+					 enum omap_dma_burst_mode burst_mode);
+
+extern void omap_set_dma_params(int lch,
+				struct omap_dma_channel_params *params);
+
+extern void omap_dma_link_lch(int lch_head, int lch_queue);
+extern void omap_dma_unlink_lch(int lch_head, int lch_queue);
+
+extern int omap_set_dma_callback(int lch,
+			void (*callback)(int lch, u16 ch_status, void *data),
+			void *data);
+extern dma_addr_t omap_get_dma_src_pos(int lch);
+extern dma_addr_t omap_get_dma_dst_pos(int lch);
+extern void omap_clear_dma(int lch);
+extern int omap_get_dma_active_status(int lch);
+extern int omap_dma_running(void);
+extern void omap_dma_set_global_params(int arb_rate, int max_fifo_depth,
+				       int tparams);
+extern int omap_dma_set_prio_lch(int lch, unsigned char read_prio,
+				 unsigned char write_prio);
+extern void omap_set_dma_dst_endian_type(int lch, enum end_type etype);
+extern void omap_set_dma_src_endian_type(int lch, enum end_type etype);
+extern int omap_get_dma_index(int lch, int *ei, int *fi);
+
+/* Chaining APIs */
+#ifndef CONFIG_ARCH_OMAP1
+extern int omap_request_dma_chain(int dev_id, const char *dev_name,
+				  void (*callback) (int chain_id, u16 ch_status,
+						    void *data),
+				  int *chain_id, int no_of_chans,
+				  int chain_mode,
+				  struct omap_dma_channel_params params);
+extern int omap_free_dma_chain(int chain_id);
+extern int omap_dma_chain_a_transfer(int chain_id, int src_start,
+				     int dest_start, int elem_count,
+				     int frame_count, void *callbk_data);
+extern int omap_start_dma_chain_transfers(int chain_id);
+extern int omap_stop_dma_chain_transfers(int chain_id);
+extern int omap_get_dma_chain_index(int chain_id, int *ei, int *fi);
+extern int omap_get_dma_chain_dst_pos(int chain_id);
+extern int omap_get_dma_chain_src_pos(int chain_id);
+
+extern int omap_modify_dma_chain_params(int chain_id,
+					struct omap_dma_channel_params params);
+extern int omap_dma_chain_status(int chain_id);
+#endif
+
+/* LCD DMA functions */
+extern int omap_request_lcd_dma(void (*callback)(u16 status, void *data),
+				void *data);
+extern void omap_free_lcd_dma(void);
+extern void omap_setup_lcd_dma(void);
+extern void omap_enable_lcd_dma(void);
+extern void omap_stop_lcd_dma(void);
+extern void omap_set_lcd_dma_ext_controller(int external);
+extern void omap_set_lcd_dma_single_transfer(int single);
+extern void omap_set_lcd_dma_b1(unsigned long addr, u16 fb_xres, u16 fb_yres,
+				int data_type);
+extern void omap_set_lcd_dma_b1_rotation(int rotate);
+extern void omap_set_lcd_dma_b1_vxres(unsigned long vxres);
+extern void omap_set_lcd_dma_b1_mirror(int mirror);
+extern void omap_set_lcd_dma_b1_scale(unsigned int xscale, unsigned int yscale);
+
+#endif /* __ASM_ARCH_DMA_H */
diff --git a/include/asm-arm/arch-omap/dmtimer.h b/arch/arm/plat-omap/include/mach/dmtimer.h
index 02b29e8437ae..6dc703138210 100644
--- a/include/asm-arm/arch-omap/dmtimer.h
+++ b/arch/arm/plat-omap/include/mach/dmtimer.h
@@ -1,5 +1,5 @@
 /*
- * linux/include/asm-arm/arch-omap/dmtimer.h
+ * arch/arm/plat-omap/include/mach/dmtimer.h
  *
  * OMAP Dual-Mode Timers
  *
diff --git a/include/asm-arm/arch-omap/dsp_common.h b/arch/arm/plat-omap/include/mach/dsp_common.h
index da97736f3efa..da97736f3efa 100644
--- a/include/asm-arm/arch-omap/dsp_common.h
+++ b/arch/arm/plat-omap/include/mach/dsp_common.h
diff --git a/include/asm-arm/arch-omap/eac.h b/arch/arm/plat-omap/include/mach/eac.h
index ccee3b0700b3..9e62cf030270 100644
--- a/include/asm-arm/arch-omap/eac.h
+++ b/arch/arm/plat-omap/include/mach/eac.h
@@ -1,5 +1,5 @@
 /*
- * linux/include/asm-arm/arch-omap2/eac.h
+ * arch/arm/plat-omap/include/mach2/eac.h
  *
  * Defines for Enhanced Audio Controller
  *
@@ -27,8 +27,8 @@
 #ifndef __ASM_ARM_ARCH_OMAP2_EAC_H
 #define __ASM_ARM_ARCH_OMAP2_EAC_H
 
-#include <asm/arch/io.h>
-#include <asm/arch/hardware.h>
+#include <mach/io.h>
+#include <mach/hardware.h>
 #include <asm/irq.h>
 
 #include <sound/core.h>
diff --git a/arch/arm/plat-omap/include/mach/entry-macro.S b/arch/arm/plat-omap/include/mach/entry-macro.S
new file mode 100644
index 000000000000..d4e9043bf201
--- /dev/null
+++ b/arch/arm/plat-omap/include/mach/entry-macro.S
@@ -0,0 +1,89 @@
+/*
+ * arch/arm/plat-omap/include/mach/entry-macro.S
+ *
+ * Low-level IRQ helper macros for OMAP-based platforms
+ *
+ * This file is licensed under  the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+#include <mach/hardware.h>
+#include <mach/io.h>
+#include <mach/irqs.h>
+
+#if defined(CONFIG_ARCH_OMAP1)
+
+#if defined(CONFIG_ARCH_OMAP730) && \
+	(defined(CONFIG_ARCH_OMAP15XX) || defined(CONFIG_ARCH_OMAP16XX))
+#error "FIXME: OMAP730 doesn't support multiple-OMAP"
+#elif defined(CONFIG_ARCH_OMAP730)
+#define INT_IH2_IRQ		INT_730_IH2_IRQ
+#elif defined(CONFIG_ARCH_OMAP15XX)
+#define INT_IH2_IRQ		INT_1510_IH2_IRQ
+#elif defined(CONFIG_ARCH_OMAP16XX)
+#define INT_IH2_IRQ		INT_1610_IH2_IRQ
+#else
+#warning "IH2 IRQ defaulted"
+#define INT_IH2_IRQ		INT_1510_IH2_IRQ
+#endif
+
+ 		.macro	disable_fiq
+		.endm
+
+		.macro  get_irqnr_preamble, base, tmp
+		.endm
+
+		.macro  arch_ret_to_user, tmp1, tmp2
+		.endm
+
+		.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
+		ldr	\base, =IO_ADDRESS(OMAP_IH1_BASE)
+		ldr	\irqnr, [\base, #IRQ_ITR_REG_OFFSET]
+		ldr	\tmp, [\base, #IRQ_MIR_REG_OFFSET]
+		mov	\irqstat, #0xffffffff
+		bic	\tmp, \irqstat, \tmp
+		tst	\irqnr, \tmp
+		beq	1510f
+
+		ldr	\irqnr, [\base, #IRQ_SIR_FIQ_REG_OFFSET]
+		cmp	\irqnr, #0
+		ldreq	\irqnr, [\base, #IRQ_SIR_IRQ_REG_OFFSET]
+		cmpeq	\irqnr, #INT_IH2_IRQ
+		ldreq	\base, =IO_ADDRESS(OMAP_IH2_BASE)
+		ldreq	\irqnr, [\base, #IRQ_SIR_IRQ_REG_OFFSET]
+		addeqs	\irqnr, \irqnr, #32
+1510:
+		.endm
+
+#elif defined(CONFIG_ARCH_OMAP24XX)
+
+#include <mach/omap24xx.h>
+
+		.macro	disable_fiq
+		.endm
+
+		.macro  get_irqnr_preamble, base, tmp
+		.endm
+
+		.macro  arch_ret_to_user, tmp1, tmp2
+		.endm
+
+		.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
+		ldr	\base, =OMAP2_VA_IC_BASE
+		ldr	\irqnr, [\base, #0x98] /* IRQ pending reg 1 */
+		cmp	\irqnr, #0x0
+		bne	2222f
+		ldr	\irqnr, [\base, #0xb8] /* IRQ pending reg 2 */
+		cmp	\irqnr, #0x0
+		bne	2222f
+		ldr	\irqnr, [\base, #0xd8] /* IRQ pending reg 3 */
+		cmp	\irqnr, #0x0
+2222:
+		ldrne	\irqnr, [\base, #IRQ_SIR_IRQ]
+
+		.endm
+
+		.macro	irq_prio_table
+		.endm
+
+#endif
diff --git a/include/asm-arm/arch-omap/fpga.h b/arch/arm/plat-omap/include/mach/fpga.h
index f420881d2a3b..c92e4b42b289 100644
--- a/include/asm-arm/arch-omap/fpga.h
+++ b/arch/arm/plat-omap/include/mach/fpga.h
@@ -1,5 +1,5 @@
 /*
- * linux/include/asm-arm/arch-omap/fpga.h
+ * arch/arm/plat-omap/include/mach/fpga.h
  *
  * Interrupt handler for OMAP-1510 FPGA
  *
diff --git a/include/asm-arm/arch-omap/gpio-switch.h b/arch/arm/plat-omap/include/mach/gpio-switch.h
index 10da0e07c0cf..10da0e07c0cf 100644
--- a/include/asm-arm/arch-omap/gpio-switch.h
+++ b/arch/arm/plat-omap/include/mach/gpio-switch.h
diff --git a/arch/arm/plat-omap/include/mach/gpio.h b/arch/arm/plat-omap/include/mach/gpio.h
new file mode 100644
index 000000000000..94ce2780e8ee
--- /dev/null
+++ b/arch/arm/plat-omap/include/mach/gpio.h
@@ -0,0 +1,122 @@
+/*
+ * arch/arm/plat-omap/include/mach/gpio.h
+ *
+ * OMAP GPIO handling defines and functions
+ *
+ * Copyright (C) 2003-2005 Nokia Corporation
+ *
+ * Written by Juha Yrjölä <juha.yrjola@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ */
+
+#ifndef __ASM_ARCH_OMAP_GPIO_H
+#define __ASM_ARCH_OMAP_GPIO_H
+
+#include <mach/irqs.h>
+#include <asm/io.h>
+
+#define OMAP_MPUIO_BASE			(void __iomem *)0xfffb5000
+
+#ifdef CONFIG_ARCH_OMAP730
+#define OMAP_MPUIO_INPUT_LATCH		0x00
+#define OMAP_MPUIO_OUTPUT		0x02
+#define OMAP_MPUIO_IO_CNTL		0x04
+#define OMAP_MPUIO_KBR_LATCH		0x08
+#define OMAP_MPUIO_KBC			0x0a
+#define OMAP_MPUIO_GPIO_EVENT_MODE	0x0c
+#define OMAP_MPUIO_GPIO_INT_EDGE	0x0e
+#define OMAP_MPUIO_KBD_INT		0x10
+#define OMAP_MPUIO_GPIO_INT		0x12
+#define OMAP_MPUIO_KBD_MASKIT		0x14
+#define OMAP_MPUIO_GPIO_MASKIT		0x16
+#define OMAP_MPUIO_GPIO_DEBOUNCING	0x18
+#define OMAP_MPUIO_LATCH		0x1a
+#else
+#define OMAP_MPUIO_INPUT_LATCH		0x00
+#define OMAP_MPUIO_OUTPUT		0x04
+#define OMAP_MPUIO_IO_CNTL		0x08
+#define OMAP_MPUIO_KBR_LATCH		0x10
+#define OMAP_MPUIO_KBC			0x14
+#define OMAP_MPUIO_GPIO_EVENT_MODE	0x18
+#define OMAP_MPUIO_GPIO_INT_EDGE	0x1c
+#define OMAP_MPUIO_KBD_INT		0x20
+#define OMAP_MPUIO_GPIO_INT		0x24
+#define OMAP_MPUIO_KBD_MASKIT		0x28
+#define OMAP_MPUIO_GPIO_MASKIT		0x2c
+#define OMAP_MPUIO_GPIO_DEBOUNCING	0x30
+#define OMAP_MPUIO_LATCH		0x34
+#endif
+
+#define OMAP34XX_NR_GPIOS		6
+
+#define OMAP_MPUIO(nr)		(OMAP_MAX_GPIO_LINES + (nr))
+#define OMAP_GPIO_IS_MPUIO(nr)	((nr) >= OMAP_MAX_GPIO_LINES)
+
+#define OMAP_GPIO_IRQ(nr)	(OMAP_GPIO_IS_MPUIO(nr) ? \
+				 IH_MPUIO_BASE + ((nr) & 0x0f) : \
+				 IH_GPIO_BASE + (nr))
+
+extern int omap_gpio_init(void);	/* Call from board init only */
+extern int omap_request_gpio(int gpio);
+extern void omap_free_gpio(int gpio);
+extern void omap_set_gpio_direction(int gpio, int is_input);
+extern void omap_set_gpio_dataout(int gpio, int enable);
+extern int omap_get_gpio_datain(int gpio);
+extern void omap_set_gpio_debounce(int gpio, int enable);
+extern void omap_set_gpio_debounce_time(int gpio, int enable);
+
+/*-------------------------------------------------------------------------*/
+
+/* Wrappers for "new style" GPIO calls, using the new infrastructure
+ * which lets us plug in FPGA, I2C, and other implementations.
+ * *
+ * The original OMAP-specfic calls should eventually be removed.
+ */
+
+#include <linux/errno.h>
+#include <asm-generic/gpio.h>
+
+static inline int gpio_get_value(unsigned gpio)
+{
+	return __gpio_get_value(gpio);
+}
+
+static inline void gpio_set_value(unsigned gpio, int value)
+{
+	__gpio_set_value(gpio, value);
+}
+
+static inline int gpio_cansleep(unsigned gpio)
+{
+	return __gpio_cansleep(gpio);
+}
+
+static inline int gpio_to_irq(unsigned gpio)
+{
+	if (gpio < (OMAP_MAX_GPIO_LINES + 16))
+		return OMAP_GPIO_IRQ(gpio);
+	return -EINVAL;
+}
+
+static inline int irq_to_gpio(unsigned irq)
+{
+	if (cpu_class_is_omap1() && (irq < (IH_MPUIO_BASE + 16)))
+		return (irq - IH_MPUIO_BASE) + OMAP_MAX_GPIO_LINES;
+	return irq - IH_GPIO_BASE;
+}
+
+#endif
diff --git a/include/asm-arm/arch-omap/gpioexpander.h b/arch/arm/plat-omap/include/mach/gpioexpander.h
index 4eed1f80e2fb..90444a0d6b1a 100644
--- a/include/asm-arm/arch-omap/gpioexpander.h
+++ b/arch/arm/plat-omap/include/mach/gpioexpander.h
@@ -1,5 +1,5 @@
 /*
- * linux/include/asm-arm/arch-omap/gpioexpander.h
+ * arch/arm/plat-omap/include/mach/gpioexpander.h
  *
  *
  * Copyright (C) 2004 Texas Instruments, Inc.
diff --git a/include/asm-arm/arch-omap/gpmc.h b/arch/arm/plat-omap/include/mach/gpmc.h
index 6a8e07ffc2d0..6a8e07ffc2d0 100644
--- a/include/asm-arm/arch-omap/gpmc.h
+++ b/arch/arm/plat-omap/include/mach/gpmc.h
diff --git a/arch/arm/plat-omap/include/mach/hardware.h b/arch/arm/plat-omap/include/mach/hardware.h
new file mode 100644
index 000000000000..07f5d7f21528
--- /dev/null
+++ b/arch/arm/plat-omap/include/mach/hardware.h
@@ -0,0 +1,355 @@
+/*
+ * arch/arm/plat-omap/include/mach/hardware.h
+ *
+ * Hardware definitions for TI OMAP processors and boards
+ *
+ * NOTE: Please put device driver specific defines into a separate header
+ *	 file for each driver.
+ *
+ * Copyright (C) 2001 RidgeRun, Inc.
+ * Author: RidgeRun, Inc. Greg Lonnon <glonnon@ridgerun.com>
+ *
+ * Reorganized for Linux-2.6 by Tony Lindgren <tony@atomide.com>
+ *                          and Dirk Behme <dirk.behme@de.bosch.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef __ASM_ARCH_OMAP_HARDWARE_H
+#define __ASM_ARCH_OMAP_HARDWARE_H
+
+#include <asm/sizes.h>
+#ifndef __ASSEMBLER__
+#include <asm/types.h>
+#include <mach/cpu.h>
+#endif
+#include <mach/serial.h>
+
+/*
+ * ---------------------------------------------------------------------------
+ * Common definitions for all OMAP processors
+ * NOTE: Put all processor or board specific parts to the special header
+ *	 files.
+ * ---------------------------------------------------------------------------
+ */
+
+/*
+ * ----------------------------------------------------------------------------
+ * Timers
+ * ----------------------------------------------------------------------------
+ */
+#define OMAP_MPU_TIMER1_BASE	(0xfffec500)
+#define OMAP_MPU_TIMER2_BASE	(0xfffec600)
+#define OMAP_MPU_TIMER3_BASE	(0xfffec700)
+#define MPU_TIMER_FREE		(1 << 6)
+#define MPU_TIMER_CLOCK_ENABLE	(1 << 5)
+#define MPU_TIMER_AR		(1 << 1)
+#define MPU_TIMER_ST		(1 << 0)
+
+/*
+ * ----------------------------------------------------------------------------
+ * Clocks
+ * ----------------------------------------------------------------------------
+ */
+#define CLKGEN_REG_BASE		(0xfffece00)
+#define ARM_CKCTL		(CLKGEN_REG_BASE + 0x0)
+#define ARM_IDLECT1		(CLKGEN_REG_BASE + 0x4)
+#define ARM_IDLECT2		(CLKGEN_REG_BASE + 0x8)
+#define ARM_EWUPCT		(CLKGEN_REG_BASE + 0xC)
+#define ARM_RSTCT1		(CLKGEN_REG_BASE + 0x10)
+#define ARM_RSTCT2		(CLKGEN_REG_BASE + 0x14)
+#define ARM_SYSST		(CLKGEN_REG_BASE + 0x18)
+#define ARM_IDLECT3		(CLKGEN_REG_BASE + 0x24)
+
+#define CK_RATEF		1
+#define CK_IDLEF		2
+#define CK_ENABLEF		4
+#define CK_SELECTF		8
+#define SETARM_IDLE_SHIFT
+
+/* DPLL control registers */
+#define DPLL_CTL		(0xfffecf00)
+
+/* DSP clock control. Must use __raw_readw() and __raw_writew() with these */
+#define DSP_CONFIG_REG_BASE     (0xe1008000)
+#define DSP_CKCTL		(DSP_CONFIG_REG_BASE + 0x0)
+#define DSP_IDLECT1		(DSP_CONFIG_REG_BASE + 0x4)
+#define DSP_IDLECT2		(DSP_CONFIG_REG_BASE + 0x8)
+#define DSP_RSTCT2		(DSP_CONFIG_REG_BASE + 0x14)
+
+/*
+ * ---------------------------------------------------------------------------
+ * UPLD
+ * ---------------------------------------------------------------------------
+ */
+#define ULPD_REG_BASE		(0xfffe0800)
+#define ULPD_IT_STATUS		(ULPD_REG_BASE + 0x14)
+#define ULPD_SETUP_ANALOG_CELL_3	(ULPD_REG_BASE + 0x24)
+#define ULPD_CLOCK_CTRL		(ULPD_REG_BASE + 0x30)
+#	define DIS_USB_PVCI_CLK		(1 << 5)	/* no USB/FAC synch */
+#	define USB_MCLK_EN		(1 << 4)	/* enable W4_USB_CLKO */
+#define ULPD_SOFT_REQ		(ULPD_REG_BASE + 0x34)
+#	define SOFT_UDC_REQ		(1 << 4)
+#	define SOFT_USB_CLK_REQ		(1 << 3)
+#	define SOFT_DPLL_REQ		(1 << 0)
+#define ULPD_DPLL_CTRL		(ULPD_REG_BASE + 0x3c)
+#define ULPD_STATUS_REQ		(ULPD_REG_BASE + 0x40)
+#define ULPD_APLL_CTRL		(ULPD_REG_BASE + 0x4c)
+#define ULPD_POWER_CTRL		(ULPD_REG_BASE + 0x50)
+#define ULPD_SOFT_DISABLE_REQ_REG	(ULPD_REG_BASE + 0x68)
+#	define DIS_MMC2_DPLL_REQ	(1 << 11)
+#	define DIS_MMC1_DPLL_REQ	(1 << 10)
+#	define DIS_UART3_DPLL_REQ	(1 << 9)
+#	define DIS_UART2_DPLL_REQ	(1 << 8)
+#	define DIS_UART1_DPLL_REQ	(1 << 7)
+#	define DIS_USB_HOST_DPLL_REQ	(1 << 6)
+#define ULPD_SDW_CLK_DIV_CTRL_SEL	(ULPD_REG_BASE + 0x74)
+#define ULPD_CAM_CLK_CTRL	(ULPD_REG_BASE + 0x7c)
+
+/*
+ * ---------------------------------------------------------------------------
+ * Watchdog timer
+ * ---------------------------------------------------------------------------
+ */
+
+/* Watchdog timer within the OMAP3.2 gigacell */
+#define OMAP_MPU_WATCHDOG_BASE	(0xfffec800)
+#define OMAP_WDT_TIMER		(OMAP_MPU_WATCHDOG_BASE + 0x0)
+#define OMAP_WDT_LOAD_TIM	(OMAP_MPU_WATCHDOG_BASE + 0x4)
+#define OMAP_WDT_READ_TIM	(OMAP_MPU_WATCHDOG_BASE + 0x4)
+#define OMAP_WDT_TIMER_MODE	(OMAP_MPU_WATCHDOG_BASE + 0x8)
+
+/*
+ * ---------------------------------------------------------------------------
+ * Interrupts
+ * ---------------------------------------------------------------------------
+ */
+#ifdef CONFIG_ARCH_OMAP1
+
+/*
+ * XXX: These probably want to be moved to arch/arm/mach-omap/omap1/irq.c
+ * or something similar.. -- PFM.
+ */
+
+#define OMAP_IH1_BASE		0xfffecb00
+#define OMAP_IH2_BASE		0xfffe0000
+
+#define OMAP_IH1_ITR		(OMAP_IH1_BASE + 0x00)
+#define OMAP_IH1_MIR		(OMAP_IH1_BASE + 0x04)
+#define OMAP_IH1_SIR_IRQ	(OMAP_IH1_BASE + 0x10)
+#define OMAP_IH1_SIR_FIQ	(OMAP_IH1_BASE + 0x14)
+#define OMAP_IH1_CONTROL	(OMAP_IH1_BASE + 0x18)
+#define OMAP_IH1_ILR0		(OMAP_IH1_BASE + 0x1c)
+#define OMAP_IH1_ISR		(OMAP_IH1_BASE + 0x9c)
+
+#define OMAP_IH2_ITR		(OMAP_IH2_BASE + 0x00)
+#define OMAP_IH2_MIR		(OMAP_IH2_BASE + 0x04)
+#define OMAP_IH2_SIR_IRQ	(OMAP_IH2_BASE + 0x10)
+#define OMAP_IH2_SIR_FIQ	(OMAP_IH2_BASE + 0x14)
+#define OMAP_IH2_CONTROL	(OMAP_IH2_BASE + 0x18)
+#define OMAP_IH2_ILR0		(OMAP_IH2_BASE + 0x1c)
+#define OMAP_IH2_ISR		(OMAP_IH2_BASE + 0x9c)
+
+#define IRQ_ITR_REG_OFFSET	0x00
+#define IRQ_MIR_REG_OFFSET	0x04
+#define IRQ_SIR_IRQ_REG_OFFSET	0x10
+#define IRQ_SIR_FIQ_REG_OFFSET	0x14
+#define IRQ_CONTROL_REG_OFFSET	0x18
+#define IRQ_ISR_REG_OFFSET	0x9c
+#define IRQ_ILR0_REG_OFFSET	0x1c
+#define IRQ_GMR_REG_OFFSET	0xa0
+
+#endif
+
+/*
+ * ----------------------------------------------------------------------------
+ * System control registers
+ * ----------------------------------------------------------------------------
+ */
+#define MOD_CONF_CTRL_0		0xfffe1080
+#define MOD_CONF_CTRL_1		0xfffe1110
+
+/*
+ * ----------------------------------------------------------------------------
+ * Pin multiplexing registers
+ * ----------------------------------------------------------------------------
+ */
+#define FUNC_MUX_CTRL_0		0xfffe1000
+#define FUNC_MUX_CTRL_1		0xfffe1004
+#define FUNC_MUX_CTRL_2		0xfffe1008
+#define COMP_MODE_CTRL_0	0xfffe100c
+#define FUNC_MUX_CTRL_3		0xfffe1010
+#define FUNC_MUX_CTRL_4		0xfffe1014
+#define FUNC_MUX_CTRL_5		0xfffe1018
+#define FUNC_MUX_CTRL_6		0xfffe101C
+#define FUNC_MUX_CTRL_7		0xfffe1020
+#define FUNC_MUX_CTRL_8		0xfffe1024
+#define FUNC_MUX_CTRL_9		0xfffe1028
+#define FUNC_MUX_CTRL_A		0xfffe102C
+#define FUNC_MUX_CTRL_B		0xfffe1030
+#define FUNC_MUX_CTRL_C		0xfffe1034
+#define FUNC_MUX_CTRL_D		0xfffe1038
+#define PULL_DWN_CTRL_0		0xfffe1040
+#define PULL_DWN_CTRL_1		0xfffe1044
+#define PULL_DWN_CTRL_2		0xfffe1048
+#define PULL_DWN_CTRL_3		0xfffe104c
+#define PULL_DWN_CTRL_4		0xfffe10ac
+
+/* OMAP-1610 specific multiplexing registers */
+#define FUNC_MUX_CTRL_E		0xfffe1090
+#define FUNC_MUX_CTRL_F		0xfffe1094
+#define FUNC_MUX_CTRL_10	0xfffe1098
+#define FUNC_MUX_CTRL_11	0xfffe109c
+#define FUNC_MUX_CTRL_12	0xfffe10a0
+#define PU_PD_SEL_0		0xfffe10b4
+#define PU_PD_SEL_1		0xfffe10b8
+#define PU_PD_SEL_2		0xfffe10bc
+#define PU_PD_SEL_3		0xfffe10c0
+#define PU_PD_SEL_4		0xfffe10c4
+
+/* Timer32K for 1610 and 1710*/
+#define OMAP_TIMER32K_BASE	0xFFFBC400
+
+/*
+ * ---------------------------------------------------------------------------
+ * TIPB bus interface
+ * ---------------------------------------------------------------------------
+ */
+#define TIPB_PUBLIC_CNTL_BASE		0xfffed300
+#define MPU_PUBLIC_TIPB_CNTL		(TIPB_PUBLIC_CNTL_BASE + 0x8)
+#define TIPB_PRIVATE_CNTL_BASE		0xfffeca00
+#define MPU_PRIVATE_TIPB_CNTL		(TIPB_PRIVATE_CNTL_BASE + 0x8)
+
+/*
+ * ----------------------------------------------------------------------------
+ * MPUI interface
+ * ----------------------------------------------------------------------------
+ */
+#define MPUI_BASE			(0xfffec900)
+#define MPUI_CTRL			(MPUI_BASE + 0x0)
+#define MPUI_DEBUG_ADDR			(MPUI_BASE + 0x4)
+#define MPUI_DEBUG_DATA			(MPUI_BASE + 0x8)
+#define MPUI_DEBUG_FLAG			(MPUI_BASE + 0xc)
+#define MPUI_STATUS_REG			(MPUI_BASE + 0x10)
+#define MPUI_DSP_STATUS			(MPUI_BASE + 0x14)
+#define MPUI_DSP_BOOT_CONFIG		(MPUI_BASE + 0x18)
+#define MPUI_DSP_API_CONFIG		(MPUI_BASE + 0x1c)
+
+/*
+ * ----------------------------------------------------------------------------
+ * LED Pulse Generator
+ * ----------------------------------------------------------------------------
+ */
+#define OMAP_LPG1_BASE			0xfffbd000
+#define OMAP_LPG2_BASE			0xfffbd800
+#define OMAP_LPG1_LCR			(OMAP_LPG1_BASE + 0x00)
+#define OMAP_LPG1_PMR			(OMAP_LPG1_BASE + 0x04)
+#define OMAP_LPG2_LCR			(OMAP_LPG2_BASE + 0x00)
+#define OMAP_LPG2_PMR			(OMAP_LPG2_BASE + 0x04)
+
+/*
+ * ----------------------------------------------------------------------------
+ * Pulse-Width Light
+ * ----------------------------------------------------------------------------
+ */
+#define OMAP_PWL_BASE			0xfffb5800
+#define OMAP_PWL_ENABLE			(OMAP_PWL_BASE + 0x00)
+#define OMAP_PWL_CLK_ENABLE		(OMAP_PWL_BASE + 0x04)
+
+/*
+ * ---------------------------------------------------------------------------
+ * Processor specific defines
+ * ---------------------------------------------------------------------------
+ */
+
+#include "omap730.h"
+#include "omap1510.h"
+#include "omap24xx.h"
+#include "omap16xx.h"
+#include "omap34xx.h"
+
+#ifndef __ASSEMBLER__
+
+/*
+ * ---------------------------------------------------------------------------
+ * Board specific defines
+ * ---------------------------------------------------------------------------
+ */
+
+#ifdef CONFIG_MACH_OMAP_INNOVATOR
+#include "board-innovator.h"
+#endif
+
+#ifdef CONFIG_MACH_OMAP_H2
+#include "board-h2.h"
+#endif
+
+#ifdef CONFIG_MACH_OMAP_PERSEUS2
+#include "board-perseus2.h"
+#endif
+
+#ifdef CONFIG_MACH_OMAP_FSAMPLE
+#include "board-fsample.h"
+#endif
+
+#ifdef CONFIG_MACH_OMAP_H3
+#include "board-h3.h"
+#endif
+
+#ifdef CONFIG_MACH_OMAP_H4
+#include "board-h4.h"
+#endif
+
+#ifdef CONFIG_MACH_OMAP_2430SDP
+#include "board-2430sdp.h"
+#endif
+
+#ifdef CONFIG_MACH_OMAP_APOLLON
+#include "board-apollon.h"
+#endif
+
+#ifdef CONFIG_MACH_OMAP_OSK
+#include "board-osk.h"
+#endif
+
+#ifdef CONFIG_MACH_VOICEBLUE
+#include "board-voiceblue.h"
+#endif
+
+#ifdef CONFIG_MACH_OMAP_PALMTE
+#include "board-palmte.h"
+#endif
+
+#ifdef CONFIG_MACH_OMAP_PALMZ71
+#include "board-palmz71.h"
+#endif
+
+#ifdef CONFIG_MACH_OMAP_PALMTT
+#include "board-palmtt.h"
+#endif
+
+#ifdef CONFIG_MACH_SX1
+#include "board-sx1.h"
+#endif
+
+#endif /* !__ASSEMBLER__ */
+
+#endif	/* __ASM_ARCH_OMAP_HARDWARE_H */
diff --git a/include/asm-arm/arch-omap/hwa742.h b/arch/arm/plat-omap/include/mach/hwa742.h
index 577f492f2d3c..577f492f2d3c 100644
--- a/include/asm-arm/arch-omap/hwa742.h
+++ b/arch/arm/plat-omap/include/mach/hwa742.h
diff --git a/arch/arm/plat-omap/include/mach/io.h b/arch/arm/plat-omap/include/mach/io.h
new file mode 100644
index 000000000000..2a30b7d88cde
--- /dev/null
+++ b/arch/arm/plat-omap/include/mach/io.h
@@ -0,0 +1,197 @@
+/*
+ * arch/arm/plat-omap/include/mach/io.h
+ *
+ * IO definitions for TI OMAP processors and boards
+ *
+ * Copied from arch/arm/mach-sa1100/include/mach/io.h
+ * Copyright (C) 1997-1999 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ * Modifications:
+ *  06-12-1997	RMK	Created.
+ *  07-04-1999	RMK	Major cleanup
+ */
+
+#ifndef __ASM_ARM_ARCH_IO_H
+#define __ASM_ARM_ARCH_IO_H
+
+#include <mach/hardware.h>
+
+#define IO_SPACE_LIMIT 0xffffffff
+
+/*
+ * We don't actually have real ISA nor PCI buses, but there is so many
+ * drivers out there that might just work if we fake them...
+ */
+#define __io(a)			((void __iomem *)(PCIO_BASE + (a)))
+#define __mem_pci(a)		(a)
+
+/*
+ * ----------------------------------------------------------------------------
+ * I/O mapping
+ * ----------------------------------------------------------------------------
+ */
+
+#define PCIO_BASE	0
+
+#if defined(CONFIG_ARCH_OMAP1)
+
+#define IO_PHYS		0xFFFB0000
+#define IO_OFFSET	0x01000000	/* Virtual IO = 0xfefb0000 */
+#define IO_SIZE		0x40000
+#define IO_VIRT		(IO_PHYS - IO_OFFSET)
+#define IO_ADDRESS(pa)	((pa) - IO_OFFSET)
+#define OMAP1_IO_ADDRESS(pa)	((pa) - IO_OFFSET)
+#define io_p2v(pa)	((pa) - IO_OFFSET)
+#define io_v2p(va)	((va) + IO_OFFSET)
+
+#elif defined(CONFIG_ARCH_OMAP2)
+
+/* We map both L3 and L4 on OMAP2 */
+#define L3_24XX_PHYS	L3_24XX_BASE	/* 0x68000000 */
+#define L3_24XX_VIRT	0xf8000000
+#define L3_24XX_SIZE	SZ_1M		/* 44kB of 128MB used, want 1MB sect */
+#define L4_24XX_PHYS	L4_24XX_BASE	/* 0x48000000 */
+#define L4_24XX_VIRT	0xd8000000
+#define L4_24XX_SIZE	SZ_1M		/* 1MB of 128MB used, want 1MB sect */
+
+#ifdef CONFIG_ARCH_OMAP2430
+#define L4_WK_243X_PHYS		L4_WK_243X_BASE		/* 0x49000000 */
+#define L4_WK_243X_VIRT		0xd9000000
+#define L4_WK_243X_SIZE		SZ_1M
+#define OMAP243X_GPMC_PHYS	OMAP243X_GPMC_BASE	/* 0x49000000 */
+#define OMAP243X_GPMC_VIRT	0xFE000000
+#define OMAP243X_GPMC_SIZE	SZ_1M
+#define OMAP243X_SDRC_PHYS	OMAP243X_SDRC_BASE
+#define OMAP243X_SDRC_VIRT	0xFD000000
+#define OMAP243X_SDRC_SIZE	SZ_1M
+#define OMAP243X_SMS_PHYS	OMAP243X_SMS_BASE
+#define OMAP243X_SMS_VIRT	0xFC000000
+#define OMAP243X_SMS_SIZE	SZ_1M
+
+#endif
+
+#define IO_OFFSET	0x90000000
+#define IO_ADDRESS(pa)	((pa) + IO_OFFSET)	/* Works for L3 and L4 */
+#define OMAP2_IO_ADDRESS(pa)	((pa) + IO_OFFSET)	/* Works for L3 and L4 */
+#define io_p2v(pa)	((pa) + IO_OFFSET)	/* Works for L3 and L4 */
+#define io_v2p(va)	((va) - IO_OFFSET)	/* Works for L3 and L4 */
+
+/* DSP */
+#define DSP_MEM_24XX_PHYS	OMAP2420_DSP_MEM_BASE	/* 0x58000000 */
+#define DSP_MEM_24XX_VIRT	0xe0000000
+#define DSP_MEM_24XX_SIZE	0x28000
+#define DSP_IPI_24XX_PHYS	OMAP2420_DSP_IPI_BASE	/* 0x59000000 */
+#define DSP_IPI_24XX_VIRT	0xe1000000
+#define DSP_IPI_24XX_SIZE	SZ_4K
+#define DSP_MMU_24XX_PHYS	OMAP2420_DSP_MMU_BASE	/* 0x5a000000 */
+#define DSP_MMU_24XX_VIRT	0xe2000000
+#define DSP_MMU_24XX_SIZE	SZ_4K
+
+#elif defined(CONFIG_ARCH_OMAP3)
+
+/* We map both L3 and L4 on OMAP3 */
+#define L3_34XX_PHYS		L3_34XX_BASE	/* 0x68000000 */
+#define L3_34XX_VIRT		0xf8000000
+#define L3_34XX_SIZE		SZ_1M   /* 44kB of 128MB used, want 1MB sect */
+
+#define L4_34XX_PHYS		L4_34XX_BASE	/* 0x48000000 */
+#define L4_34XX_VIRT		0xd8000000
+#define L4_34XX_SIZE		SZ_4M   /* 1MB of 128MB used, want 1MB sect */
+
+/*
+ * Need to look at the Size 4M for L4.
+ * VPOM3430 was not working for Int controller
+ */
+
+#define L4_WK_34XX_PHYS		L4_WK_34XX_BASE /* 0x48300000 */
+#define L4_WK_34XX_VIRT		0xd8300000
+#define L4_WK_34XX_SIZE		SZ_1M
+
+#define L4_PER_34XX_PHYS	L4_PER_34XX_BASE /* 0x49000000 */
+#define L4_PER_34XX_VIRT	0xd9000000
+#define L4_PER_34XX_SIZE	SZ_1M
+
+#define L4_EMU_34XX_PHYS	L4_EMU_34XX_BASE /* 0x54000000 */
+#define L4_EMU_34XX_VIRT	0xe4000000
+#define L4_EMU_34XX_SIZE	SZ_64M
+
+#define OMAP34XX_GPMC_PHYS	OMAP34XX_GPMC_BASE /* 0x6E000000 */
+#define OMAP34XX_GPMC_VIRT	0xFE000000
+#define OMAP34XX_GPMC_SIZE	SZ_1M
+
+#define OMAP343X_SMS_PHYS	OMAP343X_SMS_BASE /* 0x6C000000 */
+#define OMAP343X_SMS_VIRT	0xFC000000
+#define OMAP343X_SMS_SIZE	SZ_1M
+
+#define OMAP343X_SDRC_PHYS	OMAP343X_SDRC_BASE /* 0x6D000000 */
+#define OMAP343X_SDRC_VIRT	0xFD000000
+#define OMAP343X_SDRC_SIZE	SZ_1M
+
+
+#define IO_OFFSET		0x90000000
+#define IO_ADDRESS(pa)		((pa) + IO_OFFSET)/* Works for L3 and L4 */
+#define OMAP2_IO_ADDRESS(pa)	((pa) + IO_OFFSET)/* Works for L3 and L4 */
+#define io_p2v(pa)		((pa) + IO_OFFSET)/* Works for L3 and L4 */
+#define io_v2p(va)		((va) - IO_OFFSET)/* Works for L3 and L4 */
+
+/* DSP */
+#define DSP_MEM_34XX_PHYS	OMAP34XX_DSP_MEM_BASE	/* 0x58000000 */
+#define DSP_MEM_34XX_VIRT	0xe0000000
+#define DSP_MEM_34XX_SIZE	0x28000
+#define DSP_IPI_34XX_PHYS	OMAP34XX_DSP_IPI_BASE	/* 0x59000000 */
+#define DSP_IPI_34XX_VIRT	0xe1000000
+#define DSP_IPI_34XX_SIZE	SZ_4K
+#define DSP_MMU_34XX_PHYS	OMAP34XX_DSP_MMU_BASE	/* 0x5a000000 */
+#define DSP_MMU_34XX_VIRT	0xe2000000
+#define DSP_MMU_34XX_SIZE	SZ_4K
+
+#endif
+
+#ifndef __ASSEMBLER__
+
+/*
+ * Functions to access the OMAP IO region
+ *
+ * NOTE: - Use omap_read/write[bwl] for physical register addresses
+ *	 - Use __raw_read/write[bwl]() for virtual register addresses
+ *	 - Use IO_ADDRESS(phys_addr) to convert registers to virtual addresses
+ *	 - DO NOT use hardcoded virtual addresses to allow changing the
+ *	   IO address space again if needed
+ */
+#define omap_readb(a)		(*(volatile unsigned char  *)IO_ADDRESS(a))
+#define omap_readw(a)		(*(volatile unsigned short *)IO_ADDRESS(a))
+#define omap_readl(a)		(*(volatile unsigned int   *)IO_ADDRESS(a))
+
+#define omap_writeb(v,a)	(*(volatile unsigned char  *)IO_ADDRESS(a) = (v))
+#define omap_writew(v,a)	(*(volatile unsigned short *)IO_ADDRESS(a) = (v))
+#define omap_writel(v,a)	(*(volatile unsigned int   *)IO_ADDRESS(a) = (v))
+
+extern void omap1_map_common_io(void);
+extern void omap1_init_common_hw(void);
+
+extern void omap2_map_common_io(void);
+extern void omap2_init_common_hw(void);
+
+#endif
+
+#endif
diff --git a/arch/arm/plat-omap/include/mach/irda.h b/arch/arm/plat-omap/include/mach/irda.h
new file mode 100644
index 000000000000..8372a00d8e0b
--- /dev/null
+++ b/arch/arm/plat-omap/include/mach/irda.h
@@ -0,0 +1,37 @@
+/*
+ *  arch/arm/plat-omap/include/mach/irda.h
+ *
+ *  Copyright (C) 2005-2006 Komal Shah <komal_shah802003@yahoo.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef ASMARM_ARCH_IRDA_H
+#define ASMARM_ARCH_IRDA_H
+
+/* board specific transceiver capabilities */
+
+#define IR_SEL		1	/* Selects IrDA */
+#define IR_SIRMODE	2
+#define IR_FIRMODE	4
+#define IR_MIRMODE	8
+
+struct omap_irda_config {
+	int transceiver_cap;
+	int (*transceiver_mode)(struct device *dev, int mode);
+	int (*select_irda)(struct device *dev, int state);
+	/* Very specific to the needs of some platforms (h3,h4)
+	 * having calls which can sleep in irda_set_speed.
+	 */
+	struct delayed_work gpio_expa;
+	int rx_channel;
+	int tx_channel;
+	unsigned long dest_start;
+	unsigned long src_start;
+	int tx_trigger;
+	int rx_trigger;
+	int mode;
+};
+
+#endif
diff --git a/arch/arm/plat-omap/include/mach/irqs.h b/arch/arm/plat-omap/include/mach/irqs.h
new file mode 100644
index 000000000000..17248bbf3f27
--- /dev/null
+++ b/arch/arm/plat-omap/include/mach/irqs.h
@@ -0,0 +1,332 @@
+/*
+ *  arch/arm/plat-omap/include/mach/irqs.h
+ *
+ *  Copyright (C) Greg Lonnon 2001
+ *  Updated for OMAP-1610 by Tony Lindgren <tony@atomide.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ * NOTE: The interrupt vectors for the OMAP-1509, OMAP-1510, and OMAP-1610
+ *	 are different.
+ */
+
+#ifndef __ASM_ARCH_OMAP15XX_IRQS_H
+#define __ASM_ARCH_OMAP15XX_IRQS_H
+
+/*
+ * IRQ numbers for interrupt handler 1
+ *
+ * NOTE: See also the OMAP-1510 and 1610 specific IRQ numbers below
+ *
+ */
+#define INT_CAMERA		1
+#define INT_FIQ			3
+#define INT_RTDX		6
+#define INT_DSP_MMU_ABORT	7
+#define INT_HOST		8
+#define INT_ABORT		9
+#define INT_BRIDGE_PRIV		13
+#define INT_GPIO_BANK1		14
+#define INT_UART3		15
+#define INT_TIMER3		16
+#define INT_DMA_CH0_6		19
+#define INT_DMA_CH1_7		20
+#define INT_DMA_CH2_8		21
+#define INT_DMA_CH3		22
+#define INT_DMA_CH4		23
+#define INT_DMA_CH5		24
+#define INT_DMA_LCD		25
+#define INT_TIMER1		26
+#define INT_WD_TIMER		27
+#define INT_BRIDGE_PUB		28
+#define INT_TIMER2		30
+#define INT_LCD_CTRL		31
+
+/*
+ * OMAP-1510 specific IRQ numbers for interrupt handler 1
+ */
+#define INT_1510_IH2_IRQ	0
+#define INT_1510_RES2		2
+#define INT_1510_SPI_TX		4
+#define INT_1510_SPI_RX		5
+#define INT_1510_DSP_MAILBOX1	10
+#define INT_1510_DSP_MAILBOX2	11
+#define INT_1510_RES12		12
+#define INT_1510_LB_MMU		17
+#define INT_1510_RES18		18
+#define INT_1510_LOCAL_BUS	29
+
+/*
+ * OMAP-1610 specific IRQ numbers for interrupt handler 1
+ */
+#define INT_1610_IH2_IRQ	0
+#define INT_1610_IH2_FIQ	2
+#define INT_1610_McBSP2_TX	4
+#define INT_1610_McBSP2_RX	5
+#define INT_1610_DSP_MAILBOX1	10
+#define INT_1610_DSP_MAILBOX2	11
+#define INT_1610_LCD_LINE	12
+#define INT_1610_GPTIMER1	17
+#define INT_1610_GPTIMER2	18
+#define INT_1610_SSR_FIFO_0	29
+
+/*
+ * OMAP-730 specific IRQ numbers for interrupt handler 1
+ */
+#define INT_730_IH2_FIQ		0
+#define INT_730_IH2_IRQ		1
+#define INT_730_USB_NON_ISO	2
+#define INT_730_USB_ISO		3
+#define INT_730_ICR		4
+#define INT_730_EAC		5
+#define INT_730_GPIO_BANK1	6
+#define INT_730_GPIO_BANK2	7
+#define INT_730_GPIO_BANK3	8
+#define INT_730_McBSP2TX	10
+#define INT_730_McBSP2RX	11
+#define INT_730_McBSP2RX_OVF	12
+#define INT_730_LCD_LINE	14
+#define INT_730_GSM_PROTECT	15
+#define INT_730_TIMER3		16
+#define INT_730_GPIO_BANK5	17
+#define INT_730_GPIO_BANK6	18
+#define INT_730_SPGIO_WR	29
+
+/*
+ * IRQ numbers for interrupt handler 2
+ *
+ * NOTE: See also the OMAP-1510 and 1610 specific IRQ numbers below
+ */
+#define IH2_BASE		32
+
+#define INT_KEYBOARD		(1 + IH2_BASE)
+#define INT_uWireTX		(2 + IH2_BASE)
+#define INT_uWireRX		(3 + IH2_BASE)
+#define INT_I2C			(4 + IH2_BASE)
+#define INT_MPUIO		(5 + IH2_BASE)
+#define INT_USB_HHC_1		(6 + IH2_BASE)
+#define INT_McBSP3TX		(10 + IH2_BASE)
+#define INT_McBSP3RX		(11 + IH2_BASE)
+#define INT_McBSP1TX		(12 + IH2_BASE)
+#define INT_McBSP1RX		(13 + IH2_BASE)
+#define INT_UART1		(14 + IH2_BASE)
+#define INT_UART2		(15 + IH2_BASE)
+#define INT_BT_MCSI1TX		(16 + IH2_BASE)
+#define INT_BT_MCSI1RX		(17 + IH2_BASE)
+#define INT_USB_W2FC		(20 + IH2_BASE)
+#define INT_1WIRE		(21 + IH2_BASE)
+#define INT_OS_TIMER		(22 + IH2_BASE)
+#define INT_MMC			(23 + IH2_BASE)
+#define INT_GAUGE_32K		(24 + IH2_BASE)
+#define INT_RTC_TIMER		(25 + IH2_BASE)
+#define INT_RTC_ALARM		(26 + IH2_BASE)
+#define INT_MEM_STICK		(27 + IH2_BASE)
+
+/*
+ * OMAP-1510 specific IRQ numbers for interrupt handler 2
+ */
+#define INT_1510_DSP_MMU	(28 + IH2_BASE)
+#define INT_1510_COM_SPI_RO	(31 + IH2_BASE)
+
+/*
+ * OMAP-1610 specific IRQ numbers for interrupt handler 2
+ */
+#define INT_1610_FAC		(0 + IH2_BASE)
+#define INT_1610_USB_HHC_2	(7 + IH2_BASE)
+#define INT_1610_USB_OTG	(8 + IH2_BASE)
+#define INT_1610_SoSSI		(9 + IH2_BASE)
+#define INT_1610_SoSSI_MATCH	(19 + IH2_BASE)
+#define INT_1610_DSP_MMU	(28 + IH2_BASE)
+#define INT_1610_McBSP2RX_OF	(31 + IH2_BASE)
+#define INT_1610_STI		(32 + IH2_BASE)
+#define INT_1610_STI_WAKEUP	(33 + IH2_BASE)
+#define INT_1610_GPTIMER3	(34 + IH2_BASE)
+#define INT_1610_GPTIMER4	(35 + IH2_BASE)
+#define INT_1610_GPTIMER5	(36 + IH2_BASE)
+#define INT_1610_GPTIMER6	(37 + IH2_BASE)
+#define INT_1610_GPTIMER7	(38 + IH2_BASE)
+#define INT_1610_GPTIMER8	(39 + IH2_BASE)
+#define INT_1610_GPIO_BANK2	(40 + IH2_BASE)
+#define INT_1610_GPIO_BANK3	(41 + IH2_BASE)
+#define INT_1610_MMC2		(42 + IH2_BASE)
+#define INT_1610_CF		(43 + IH2_BASE)
+#define INT_1610_WAKE_UP_REQ	(46 + IH2_BASE)
+#define INT_1610_GPIO_BANK4	(48 + IH2_BASE)
+#define INT_1610_SPI		(49 + IH2_BASE)
+#define INT_1610_DMA_CH6	(53 + IH2_BASE)
+#define INT_1610_DMA_CH7	(54 + IH2_BASE)
+#define INT_1610_DMA_CH8	(55 + IH2_BASE)
+#define INT_1610_DMA_CH9	(56 + IH2_BASE)
+#define INT_1610_DMA_CH10	(57 + IH2_BASE)
+#define INT_1610_DMA_CH11	(58 + IH2_BASE)
+#define INT_1610_DMA_CH12	(59 + IH2_BASE)
+#define INT_1610_DMA_CH13	(60 + IH2_BASE)
+#define INT_1610_DMA_CH14	(61 + IH2_BASE)
+#define INT_1610_DMA_CH15	(62 + IH2_BASE)
+#define INT_1610_NAND		(63 + IH2_BASE)
+
+/*
+ * OMAP-730 specific IRQ numbers for interrupt handler 2
+ */
+#define INT_730_HW_ERRORS	(0 + IH2_BASE)
+#define INT_730_NFIQ_PWR_FAIL	(1 + IH2_BASE)
+#define INT_730_CFCD		(2 + IH2_BASE)
+#define INT_730_CFIREQ		(3 + IH2_BASE)
+#define INT_730_I2C		(4 + IH2_BASE)
+#define INT_730_PCC		(5 + IH2_BASE)
+#define INT_730_MPU_EXT_NIRQ	(6 + IH2_BASE)
+#define INT_730_SPI_100K_1	(7 + IH2_BASE)
+#define INT_730_SYREN_SPI	(8 + IH2_BASE)
+#define INT_730_VLYNQ		(9 + IH2_BASE)
+#define INT_730_GPIO_BANK4	(10 + IH2_BASE)
+#define INT_730_McBSP1TX	(11 + IH2_BASE)
+#define INT_730_McBSP1RX	(12 + IH2_BASE)
+#define INT_730_McBSP1RX_OF	(13 + IH2_BASE)
+#define INT_730_UART_MODEM_IRDA_2 (14 + IH2_BASE)
+#define INT_730_UART_MODEM_1	(15 + IH2_BASE)
+#define INT_730_MCSI		(16 + IH2_BASE)
+#define INT_730_uWireTX		(17 + IH2_BASE)
+#define INT_730_uWireRX		(18 + IH2_BASE)
+#define INT_730_SMC_CD		(19 + IH2_BASE)
+#define INT_730_SMC_IREQ	(20 + IH2_BASE)
+#define INT_730_HDQ_1WIRE	(21 + IH2_BASE)
+#define INT_730_TIMER32K	(22 + IH2_BASE)
+#define INT_730_MMC_SDIO	(23 + IH2_BASE)
+#define INT_730_UPLD		(24 + IH2_BASE)
+#define INT_730_USB_HHC_1	(27 + IH2_BASE)
+#define INT_730_USB_HHC_2	(28 + IH2_BASE)
+#define INT_730_USB_GENI	(29 + IH2_BASE)
+#define INT_730_USB_OTG		(30 + IH2_BASE)
+#define INT_730_CAMERA_IF	(31 + IH2_BASE)
+#define INT_730_RNG		(32 + IH2_BASE)
+#define INT_730_DUAL_MODE_TIMER (33 + IH2_BASE)
+#define INT_730_DBB_RF_EN	(34 + IH2_BASE)
+#define INT_730_MPUIO_KEYPAD	(35 + IH2_BASE)
+#define INT_730_SHA1_MD5	(36 + IH2_BASE)
+#define INT_730_SPI_100K_2	(37 + IH2_BASE)
+#define INT_730_RNG_IDLE	(38 + IH2_BASE)
+#define INT_730_MPUIO		(39 + IH2_BASE)
+#define INT_730_LLPC_LCD_CTRL_CAN_BE_OFF	(40 + IH2_BASE)
+#define INT_730_LLPC_OE_FALLING (41 + IH2_BASE)
+#define INT_730_LLPC_OE_RISING	(42 + IH2_BASE)
+#define INT_730_LLPC_VSYNC	(43 + IH2_BASE)
+#define INT_730_WAKE_UP_REQ	(46 + IH2_BASE)
+#define INT_730_DMA_CH6		(53 + IH2_BASE)
+#define INT_730_DMA_CH7		(54 + IH2_BASE)
+#define INT_730_DMA_CH8		(55 + IH2_BASE)
+#define INT_730_DMA_CH9		(56 + IH2_BASE)
+#define INT_730_DMA_CH10	(57 + IH2_BASE)
+#define INT_730_DMA_CH11	(58 + IH2_BASE)
+#define INT_730_DMA_CH12	(59 + IH2_BASE)
+#define INT_730_DMA_CH13	(60 + IH2_BASE)
+#define INT_730_DMA_CH14	(61 + IH2_BASE)
+#define INT_730_DMA_CH15	(62 + IH2_BASE)
+#define INT_730_NAND		(63 + IH2_BASE)
+
+#define INT_24XX_SYS_NIRQ	7
+#define INT_24XX_SDMA_IRQ0	12
+#define INT_24XX_SDMA_IRQ1	13
+#define INT_24XX_SDMA_IRQ2	14
+#define INT_24XX_SDMA_IRQ3	15
+#define INT_24XX_CAM_IRQ	24
+#define INT_24XX_DSS_IRQ	25
+#define INT_24XX_MAIL_U0_MPU	26
+#define INT_24XX_DSP_UMA	27
+#define INT_24XX_DSP_MMU	28
+#define INT_24XX_GPIO_BANK1	29
+#define INT_24XX_GPIO_BANK2	30
+#define INT_24XX_GPIO_BANK3	31
+#define INT_24XX_GPIO_BANK4	32
+#define INT_24XX_GPIO_BANK5	33
+#define INT_24XX_MAIL_U3_MPU	34
+#define INT_24XX_GPTIMER1	37
+#define INT_24XX_GPTIMER2	38
+#define INT_24XX_GPTIMER3	39
+#define INT_24XX_GPTIMER4	40
+#define INT_24XX_GPTIMER5	41
+#define INT_24XX_GPTIMER6	42
+#define INT_24XX_GPTIMER7	43
+#define INT_24XX_GPTIMER8	44
+#define INT_24XX_GPTIMER9	45
+#define INT_24XX_GPTIMER10	46
+#define INT_24XX_GPTIMER11	47
+#define INT_24XX_GPTIMER12	48
+#define INT_24XX_I2C1_IRQ	56
+#define INT_24XX_I2C2_IRQ	57
+#define INT_24XX_MCBSP1_IRQ_TX	59
+#define INT_24XX_MCBSP1_IRQ_RX	60
+#define INT_24XX_MCBSP2_IRQ_TX	62
+#define INT_24XX_MCBSP2_IRQ_RX	63
+#define INT_24XX_UART1_IRQ	72
+#define INT_24XX_UART2_IRQ	73
+#define INT_24XX_UART3_IRQ	74
+#define INT_24XX_USB_IRQ_GEN	75
+#define INT_24XX_USB_IRQ_NISO	76
+#define INT_24XX_USB_IRQ_ISO	77
+#define INT_24XX_USB_IRQ_HGEN	78
+#define INT_24XX_USB_IRQ_HSOF	79
+#define INT_24XX_USB_IRQ_OTG	80
+#define INT_24XX_MMC_IRQ	83
+
+/* Max. 128 level 2 IRQs (OMAP1610), 192 GPIOs (OMAP730) and
+ * 16 MPUIO lines */
+#define OMAP_MAX_GPIO_LINES	192
+#define IH_GPIO_BASE		(128 + IH2_BASE)
+#define IH_MPUIO_BASE		(OMAP_MAX_GPIO_LINES + IH_GPIO_BASE)
+#define OMAP_IRQ_END		(IH_MPUIO_BASE + 16)
+
+/* External FPGA handles interrupts on Innovator boards */
+#define	OMAP_FPGA_IRQ_BASE	(OMAP_IRQ_END)
+#ifdef	CONFIG_MACH_OMAP_INNOVATOR
+#define OMAP_FPGA_NR_IRQS	24
+#else
+#define OMAP_FPGA_NR_IRQS	0
+#endif
+#define OMAP_FPGA_IRQ_END	(OMAP_FPGA_IRQ_BASE + OMAP_FPGA_NR_IRQS)
+
+/* External TWL4030 can handle interrupts on 2430 and 34xx boards */
+#define	TWL4030_IRQ_BASE	(OMAP_FPGA_IRQ_END)
+#ifdef	CONFIG_TWL4030_CORE
+#define	TWL4030_BASE_NR_IRQS	8
+#define	TWL4030_PWR_NR_IRQS	8
+#else
+#define	TWL4030_BASE_NR_IRQS	0
+#define	TWL4030_PWR_NR_IRQS	0
+#endif
+#define TWL4030_IRQ_END		(TWL4030_IRQ_BASE + TWL4030_BASE_NR_IRQS)
+#define TWL4030_PWR_IRQ_BASE	TWL4030_IRQ_END
+#define	TWL4030_PWR_IRQ_END	(TWL4030_PWR_IRQ_BASE + TWL4030_PWR_NR_IRQS)
+
+/* External TWL4030 gpio interrupts are optional */
+#define TWL4030_GPIO_IRQ_BASE	TWL4030_PWR_IRQ_END
+#ifdef	CONFIG_TWL4030_GPIO
+#define TWL4030_GPIO_NR_IRQS	18
+#else
+#define	TWL4030_GPIO_NR_IRQS	0
+#endif
+#define TWL4030_GPIO_IRQ_END	(TWL4030_GPIO_IRQ_BASE + TWL4030_GPIO_NR_IRQS)
+
+/* Total number of interrupts depends on the enabled blocks above */
+#define NR_IRQS			TWL4030_GPIO_IRQ_END
+
+#define OMAP_IRQ_BIT(irq)	(1 << ((irq) % 32))
+
+#ifndef __ASSEMBLY__
+extern void omap_init_irq(void);
+#endif
+
+#include <mach/hardware.h>
+
+#endif
diff --git a/include/asm-arm/arch-omap/keypad.h b/arch/arm/plat-omap/include/mach/keypad.h
index b7f83075436e..232923aaf61d 100644
--- a/include/asm-arm/arch-omap/keypad.h
+++ b/arch/arm/plat-omap/include/mach/keypad.h
@@ -1,5 +1,5 @@
 /*
- *  linux/include/asm-arm/arch-omap/keypad.h
+ *  arch/arm/plat-omap/include/mach/keypad.h
  *
  *  Copyright (C) 2006 Komal Shah <komal_shah802003@yahoo.com>
  *
diff --git a/include/asm-arm/arch-omap/lcd_mipid.h b/arch/arm/plat-omap/include/mach/lcd_mipid.h
index f8fbc4801e52..f8fbc4801e52 100644
--- a/include/asm-arm/arch-omap/lcd_mipid.h
+++ b/arch/arm/plat-omap/include/mach/lcd_mipid.h
diff --git a/include/asm-arm/arch-omap/led.h b/arch/arm/plat-omap/include/mach/led.h
index f3acae28e2da..25e451e7e2fd 100644
--- a/include/asm-arm/arch-omap/led.h
+++ b/arch/arm/plat-omap/include/mach/led.h
@@ -1,5 +1,5 @@
 /*
- *  linux/include/asm-arm/arch-omap/led.h
+ *  arch/arm/plat-omap/include/mach/led.h
  *
  *  Copyright (C) 2006 Samsung Electronics
  *  Kyungmin Park <kyungmin.park@samsung.com>
diff --git a/include/asm-arm/arch-omap/mailbox.h b/arch/arm/plat-omap/include/mach/mailbox.h
index 7cbed9332e16..7cbed9332e16 100644
--- a/include/asm-arm/arch-omap/mailbox.h
+++ b/arch/arm/plat-omap/include/mach/mailbox.h
diff --git a/include/asm-arm/arch-omap/mcbsp.h b/arch/arm/plat-omap/include/mach/mcbsp.h
index 26c78f67dc8e..6eb44a92871d 100644
--- a/include/asm-arm/arch-omap/mcbsp.h
+++ b/arch/arm/plat-omap/include/mach/mcbsp.h
@@ -1,5 +1,5 @@
 /*
- * linux/include/asm-arm/arch-omap/mcbsp.h
+ * arch/arm/plat-omap/include/mach/mcbsp.h
  *
  * Defines for Multi-Channel Buffered Serial Port
  *
@@ -27,8 +27,8 @@
 #include <linux/completion.h>
 #include <linux/spinlock.h>
 
-#include <asm/hardware.h>
-#include <asm/arch/clock.h>
+#include <mach/hardware.h>
+#include <mach/clock.h>
 
 #define OMAP730_MCBSP1_BASE	0xfffb1000
 #define OMAP730_MCBSP2_BASE	0xfffb1800
diff --git a/include/asm-arm/arch-omap/mcspi.h b/arch/arm/plat-omap/include/mach/mcspi.h
index 1254e4945b6f..1254e4945b6f 100644
--- a/include/asm-arm/arch-omap/mcspi.h
+++ b/arch/arm/plat-omap/include/mach/mcspi.h
diff --git a/arch/arm/plat-omap/include/mach/memory.h b/arch/arm/plat-omap/include/mach/memory.h
new file mode 100644
index 000000000000..a325caf80d04
--- /dev/null
+++ b/arch/arm/plat-omap/include/mach/memory.h
@@ -0,0 +1,104 @@
+/*
+ * arch/arm/plat-omap/include/mach/memory.h
+ *
+ * Memory map for OMAP-1510 and 1610
+ *
+ * Copyright (C) 2000 RidgeRun, Inc.
+ * Author: Greg Lonnon <glonnon@ridgerun.com>
+ *
+ * This file was derived from arch/arm/mach-intergrator/include/mach/memory.h
+ * Copyright (C) 1999 ARM Limited
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef __ASM_ARCH_MEMORY_H
+#define __ASM_ARCH_MEMORY_H
+
+/*
+ * Physical DRAM offset.
+ */
+#if defined(CONFIG_ARCH_OMAP1)
+#define PHYS_OFFSET		UL(0x10000000)
+#elif defined(CONFIG_ARCH_OMAP2)
+#define PHYS_OFFSET		UL(0x80000000)
+#endif
+
+/*
+ * Conversion between SDRAM and fake PCI bus, used by USB
+ * NOTE: Physical address must be converted to Local Bus address
+ *	 on OMAP-1510 only
+ */
+
+/*
+ * Bus address is physical address, except for OMAP-1510 Local Bus.
+ */
+#define __virt_to_bus(x)	__virt_to_phys(x)
+#define __bus_to_virt(x)	__phys_to_virt(x)
+
+/*
+ * OMAP-1510 bus address is translated into a Local Bus address if the
+ * OMAP bus type is lbus. We do the address translation based on the
+ * device overriding the defaults used in the dma-mapping API.
+ * Note that the is_lbus_device() test is not very efficient on 1510
+ * because of the strncmp().
+ */
+#ifdef CONFIG_ARCH_OMAP15XX
+
+/*
+ * OMAP-1510 Local Bus address offset
+ */
+#define OMAP1510_LB_OFFSET	UL(0x30000000)
+
+#define virt_to_lbus(x)		((x) - PAGE_OFFSET + OMAP1510_LB_OFFSET)
+#define lbus_to_virt(x)		((x) - OMAP1510_LB_OFFSET + PAGE_OFFSET)
+#define is_lbus_device(dev)	(cpu_is_omap15xx() && dev && (strncmp(dev->bus_id, "ohci", 4) == 0))
+
+#define __arch_page_to_dma(dev, page)	({is_lbus_device(dev) ? \
+					(dma_addr_t)virt_to_lbus(page_address(page)) : \
+					(dma_addr_t)__virt_to_bus(page_address(page));})
+
+#define __arch_dma_to_virt(dev, addr)	({ (void *) (is_lbus_device(dev) ? \
+						lbus_to_virt(addr) : \
+						__bus_to_virt(addr)); })
+
+#define __arch_virt_to_dma(dev, addr)	({ unsigned long __addr = (unsigned long)(addr); \
+					   (dma_addr_t) (is_lbus_device(dev) ? \
+						virt_to_lbus(__addr) : \
+						__virt_to_bus(__addr)); })
+
+#endif	/* CONFIG_ARCH_OMAP15XX */
+
+/* Override the ARM default */
+#ifdef CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE
+
+#if (CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE == 0)
+#undef CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE
+#define CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE 2
+#endif
+
+#define CONSISTENT_DMA_SIZE \
+	(((CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE + 1) & ~1) * 1024 * 1024)
+
+#endif
+
+#endif
+
diff --git a/include/asm-arm/arch-omap/menelaus.h b/arch/arm/plat-omap/include/mach/menelaus.h
index 69ed7ee40179..3122bf68c7ce 100644
--- a/include/asm-arm/arch-omap/menelaus.h
+++ b/arch/arm/plat-omap/include/mach/menelaus.h
@@ -1,5 +1,5 @@
 /*
- * linux/include/asm-arm/arch-omap/menelaus.h
+ * arch/arm/plat-omap/include/mach/menelaus.h
  *
  * Functions to access Menelaus power management chip
  */
diff --git a/arch/arm/plat-omap/include/mach/mmc.h b/arch/arm/plat-omap/include/mach/mmc.h
new file mode 100644
index 000000000000..fc15d13058fc
--- /dev/null
+++ b/arch/arm/plat-omap/include/mach/mmc.h
@@ -0,0 +1,74 @@
+/*
+ * MMC definitions for OMAP2
+ *
+ * Copyright (C) 2006 Nokia Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __OMAP2_MMC_H
+#define __OMAP2_MMC_H
+
+#include <linux/types.h>
+#include <linux/device.h>
+#include <linux/mmc/host.h>
+
+#include <mach/board.h>
+
+#define OMAP_MMC_MAX_SLOTS	2
+
+struct omap_mmc_platform_data {
+	struct omap_mmc_conf	conf;
+
+	/* number of slots on board */
+	unsigned nr_slots:2;
+
+	/* set if your board has components or wiring that limits the
+	 * maximum frequency on the MMC bus */
+	unsigned int max_freq;
+
+	/* switch the bus to a new slot */
+	int (* switch_slot)(struct device *dev, int slot);
+	/* initialize board-specific MMC functionality, can be NULL if
+	 * not supported */
+	int (* init)(struct device *dev);
+	void (* cleanup)(struct device *dev);
+	void (* shutdown)(struct device *dev);
+
+	/* To handle board related suspend/resume functionality for MMC */
+	int (*suspend)(struct device *dev, int slot);
+	int (*resume)(struct device *dev, int slot);
+
+	struct omap_mmc_slot_data {
+		int (* set_bus_mode)(struct device *dev, int slot, int bus_mode);
+		int (* set_power)(struct device *dev, int slot, int power_on, int vdd);
+		int (* get_ro)(struct device *dev, int slot);
+
+		/* return MMC cover switch state, can be NULL if not supported.
+		 *
+		 * possible return values:
+		 *   0 - open
+		 *   1 - closed
+		 */
+		int (* get_cover_state)(struct device *dev, int slot);
+
+		const char *name;
+		u32 ocr_mask;
+
+		/* Card detection IRQs */
+		int card_detect_irq;
+		int (* card_detect)(int irq);
+
+		unsigned int ban_openended:1;
+
+	} slots[OMAP_MMC_MAX_SLOTS];
+};
+
+extern void omap_set_mmc_info(int host, const struct omap_mmc_platform_data *info);
+
+/* called from board-specific card detection service routine */
+extern void omap_mmc_notify_cover_event(struct device *dev, int slot, int is_closed);
+
+#endif
diff --git a/arch/arm/plat-omap/include/mach/mtd-xip.h b/arch/arm/plat-omap/include/mach/mtd-xip.h
new file mode 100644
index 000000000000..5cee7e16a1b4
--- /dev/null
+++ b/arch/arm/plat-omap/include/mach/mtd-xip.h
@@ -0,0 +1,61 @@
+/*
+ * MTD primitives for XIP support. Architecture specific functions.
+ *
+ * Do not include this file directly. It's included from linux/mtd/xip.h
+ *
+ * Author: Vladimir Barinov <vbarinov@ru.mvista.com>
+ *
+ * (c) 2005 MontaVista Software, Inc.  This file is licensed under the
+ * terms of the GNU General Public License version 2.  This program is
+ * licensed "as is" without any warranty of any kind, whether express or
+ * implied.
+ */
+
+#ifndef __ARCH_OMAP_MTD_XIP_H__
+#define __ARCH_OMAP_MTD_XIP_H__
+
+#include <mach/hardware.h>
+#define OMAP_MPU_TIMER_BASE	(0xfffec500)
+#define OMAP_MPU_TIMER_OFFSET	0x100
+
+typedef struct {
+	u32 cntl;			/* CNTL_TIMER, R/W */
+	u32 load_tim;			/* LOAD_TIM,   W */
+	u32 read_tim;			/* READ_TIM,   R */
+} xip_omap_mpu_timer_regs_t;
+
+#define xip_omap_mpu_timer_base(n)					\
+((volatile xip_omap_mpu_timer_regs_t*)IO_ADDRESS(OMAP_MPU_TIMER_BASE +	\
+	(n)*OMAP_MPU_TIMER_OFFSET))
+
+static inline unsigned long xip_omap_mpu_timer_read(int nr)
+{
+	volatile xip_omap_mpu_timer_regs_t* timer = xip_omap_mpu_timer_base(nr);
+	return timer->read_tim;
+}
+
+#define xip_irqpending()	\
+	(omap_readl(OMAP_IH1_ITR) & ~omap_readl(OMAP_IH1_MIR))
+#define xip_currtime()		(~xip_omap_mpu_timer_read(0))
+
+/*
+ * It's permitted to do approxmation for xip_elapsed_since macro
+ * (see linux/mtd/xip.h)
+ */
+
+#ifdef CONFIG_MACH_OMAP_PERSEUS2
+#define xip_elapsed_since(x)	(signed)((~xip_omap_mpu_timer_read(0) - (x)) / 7)
+#else
+#define xip_elapsed_since(x)	(signed)((~xip_omap_mpu_timer_read(0) - (x)) / 6)
+#endif
+
+/*
+ * xip_cpu_idle() is used when waiting for a delay equal or larger than
+ * the system timer tick period.  This should put the CPU into idle mode
+ * to save power and to be woken up only when some interrupts are pending.
+ * As above, this should not rely upon standard kernel code.
+ */
+
+#define xip_cpu_idle()  asm volatile ("mcr p15, 0, %0, c7, c0, 4" :: "r" (1))
+
+#endif /* __ARCH_OMAP_MTD_XIP_H__ */
diff --git a/include/asm-arm/arch-omap/mux.h b/arch/arm/plat-omap/include/mach/mux.h
index ff9a5b5575fd..614b2c1327c7 100644
--- a/include/asm-arm/arch-omap/mux.h
+++ b/arch/arm/plat-omap/include/mach/mux.h
@@ -1,5 +1,5 @@
 /*
- * linux/include/asm-arm/arch-omap/mux.h
+ * arch/arm/plat-omap/include/mach/mux.h
  *
  * Table of the Omap register configurations for the FUNC_MUX and
  * PULL_DWN combinations.
diff --git a/include/asm-arm/arch-omap/nand.h b/arch/arm/plat-omap/include/mach/nand.h
index 17ae26e35353..631a7bed1eef 100644
--- a/include/asm-arm/arch-omap/nand.h
+++ b/arch/arm/plat-omap/include/mach/nand.h
@@ -1,5 +1,5 @@
 /*
- * include/asm-arm/arch-omap/nand.h
+ * arch/arm/plat-omap/include/mach/nand.h
  *
  * Copyright (C) 2006 Micron Technology Inc.
  *
diff --git a/include/asm-arm/arch-omap/omap-alsa.h b/arch/arm/plat-omap/include/mach/omap-alsa.h
index faa0ed23d4ba..bdf30a0f87f2 100644
--- a/include/asm-arm/arch-omap/omap-alsa.h
+++ b/arch/arm/plat-omap/include/mach/omap-alsa.h
@@ -1,5 +1,5 @@
 /*
- * linux/include/asm-arm/arch-omap/omap-alsa.h
+ * arch/arm/plat-omap/include/mach/omap-alsa.h
  *
  * Alsa Driver for AIC23 and TSC2101 codecs on OMAP platform boards.
  *
@@ -40,10 +40,10 @@
 #ifndef __OMAP_ALSA_H
 #define __OMAP_ALSA_H
 
-#include <asm/arch/dma.h>
+#include <mach/dma.h>
 #include <sound/core.h>
 #include <sound/pcm.h>
-#include <asm/arch/mcbsp.h>
+#include <mach/mcbsp.h>
 #include <linux/platform_device.h>
 
 #define DMA_BUF_SIZE	(1024 * 8)
diff --git a/include/asm-arm/arch-omap/omap1510.h b/arch/arm/plat-omap/include/mach/omap1510.h
index c575d354850f..505a38af8b22 100644
--- a/include/asm-arm/arch-omap/omap1510.h
+++ b/arch/arm/plat-omap/include/mach/omap1510.h
@@ -1,4 +1,4 @@
-/* linux/include/asm-arm/arch-omap/omap1510.h
+/* arch/arm/plat-omap/include/mach/omap1510.h
  *
  * Hardware definitions for TI OMAP1510 processor.
  *
diff --git a/include/asm-arm/arch-omap/omap16xx.h b/arch/arm/plat-omap/include/mach/omap16xx.h
index f7f5cdfdccce..c6c93afb2788 100644
--- a/include/asm-arm/arch-omap/omap16xx.h
+++ b/arch/arm/plat-omap/include/mach/omap16xx.h
@@ -1,4 +1,4 @@
-/* linux/include/asm-arm/arch-omap/omap16xx.h
+/* arch/arm/plat-omap/include/mach/omap16xx.h
  *
  * Hardware definitions for TI OMAP1610/5912/1710 processors.
  *
diff --git a/include/asm-arm/arch-omap/omap24xx.h b/arch/arm/plat-omap/include/mach/omap24xx.h
index b9fcaae287c8..bb8319d66e9f 100644
--- a/include/asm-arm/arch-omap/omap24xx.h
+++ b/arch/arm/plat-omap/include/mach/omap24xx.h
@@ -1,5 +1,5 @@
 /*
- * include/asm-arm/arch-omap/omap24xx.h
+ * arch/arm/plat-omap/include/mach/omap24xx.h
  *
  * This file contains the processor specific definitions
  * of the TI OMAP24XX.
diff --git a/include/asm-arm/arch-omap/omap34xx.h b/arch/arm/plat-omap/include/mach/omap34xx.h
index aa30c6d10abd..8e0479fff05a 100644
--- a/include/asm-arm/arch-omap/omap34xx.h
+++ b/arch/arm/plat-omap/include/mach/omap34xx.h
@@ -1,5 +1,5 @@
 /*
- * include/asm-arm/arch-omap/omap34xx.h
+ * arch/arm/plat-omap/include/mach/omap34xx.h
  *
  * This file contains the processor specific definitions of the TI OMAP34XX.
  *
diff --git a/include/asm-arm/arch-omap/omap730.h b/arch/arm/plat-omap/include/mach/omap730.h
index 755b64c5e9f0..14272bc1a6fd 100644
--- a/include/asm-arm/arch-omap/omap730.h
+++ b/arch/arm/plat-omap/include/mach/omap730.h
@@ -1,4 +1,4 @@
-/* linux/include/asm-arm/arch-omap/omap730.h
+/* arch/arm/plat-omap/include/mach/omap730.h
  *
  * Hardware definitions for TI OMAP730 processor.
  *
diff --git a/include/asm-arm/arch-omap/omapfb.h b/arch/arm/plat-omap/include/mach/omapfb.h
index 46d7a4f60854..cae037d13079 100644
--- a/include/asm-arm/arch-omap/omapfb.h
+++ b/arch/arm/plat-omap/include/mach/omapfb.h
@@ -1,5 +1,5 @@
 /*
- * File: include/asm-arm/arch-omap/omapfb.h
+ * File: arch/arm/plat-omap/include/mach/omapfb.h
  *
  * Framebuffer driver for TI OMAP boards
  *
@@ -167,7 +167,7 @@ enum omapfb_update_mode {
 #include <linux/fb.h>
 #include <linux/mutex.h>
 
-#include <asm/arch/board.h>
+#include <mach/board.h>
 
 #define OMAP_LCDC_INV_VSYNC             0x0001
 #define OMAP_LCDC_INV_HSYNC             0x0002
diff --git a/include/asm-arm/arch-omap/onenand.h b/arch/arm/plat-omap/include/mach/onenand.h
index 6c959d0ce470..d57f20226b28 100644
--- a/include/asm-arm/arch-omap/onenand.h
+++ b/arch/arm/plat-omap/include/mach/onenand.h
@@ -1,5 +1,5 @@
 /*
- * include/asm-arm/arch-omap/onenand.h
+ * arch/arm/plat-omap/include/mach/onenand.h
  *
  * Copyright (C) 2006 Nokia Corporation
  * Author: Juha Yrjola
diff --git a/arch/arm/plat-omap/include/mach/param.h b/arch/arm/plat-omap/include/mach/param.h
new file mode 100644
index 000000000000..1eb4dc326979
--- /dev/null
+++ b/arch/arm/plat-omap/include/mach/param.h
@@ -0,0 +1,8 @@
+/*
+ *  arch/arm/plat-omap/include/mach/param.h
+ *
+ */
+
+#ifdef CONFIG_OMAP_32K_TIMER_HZ
+#define HZ	CONFIG_OMAP_32K_TIMER_HZ
+#endif
diff --git a/arch/arm/plat-omap/include/mach/pm.h b/arch/arm/plat-omap/include/mach/pm.h
new file mode 100644
index 000000000000..bfa09325a5ff
--- /dev/null
+++ b/arch/arm/plat-omap/include/mach/pm.h
@@ -0,0 +1,356 @@
+/*
+ * arch/arm/plat-omap/include/mach/pm.h
+ *
+ * Header file for OMAP Power Management Routines
+ *
+ * Author: MontaVista Software, Inc.
+ *	   support@mvista.com
+ *
+ * Copyright 2002 MontaVista Software Inc.
+ *
+ * Cleanup 2004 for Linux 2.6 by Dirk Behme <dirk.behme@de.bosch.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef __ASM_ARCH_OMAP_PM_H
+#define __ASM_ARCH_OMAP_PM_H
+
+/*
+ * ----------------------------------------------------------------------------
+ * Register and offset definitions to be used in PM assembler code
+ * ----------------------------------------------------------------------------
+ */
+#define CLKGEN_REG_ASM_BASE		io_p2v(0xfffece00)
+#define ARM_IDLECT1_ASM_OFFSET		0x04
+#define ARM_IDLECT2_ASM_OFFSET		0x08
+
+#define TCMIF_ASM_BASE			io_p2v(0xfffecc00)
+#define EMIFS_CONFIG_ASM_OFFSET		0x0c
+#define EMIFF_SDRAM_CONFIG_ASM_OFFSET	0x20
+
+/*
+ * ----------------------------------------------------------------------------
+ * Power management bitmasks
+ * ----------------------------------------------------------------------------
+ */
+#define IDLE_WAIT_CYCLES		0x00000fff
+#define PERIPHERAL_ENABLE		0x2
+
+#define SELF_REFRESH_MODE		0x0c000001
+#define IDLE_EMIFS_REQUEST		0xc
+#define MODEM_32K_EN			0x1
+#define PER_EN				0x1
+
+#define CPU_SUSPEND_SIZE		200
+#define ULPD_LOW_PWR_EN			0x0001
+#define ULPD_DEEP_SLEEP_TRANSITION_EN	0x0010
+#define ULPD_SETUP_ANALOG_CELL_3_VAL	0
+#define ULPD_POWER_CTRL_REG_VAL		0x0219
+
+#define DSP_IDLE_DELAY			10
+#define DSP_IDLE			0x0040
+#define DSP_RST				0x0004
+#define DSP_ENABLE			0x0002
+#define SUFFICIENT_DSP_RESET_TIME	1000
+#define DEFAULT_MPUI_CONFIG		0x05cf
+#define ENABLE_XORCLK			0x2
+#define DSP_CLOCK_ENABLE		0x2000
+#define DSP_IDLE_MODE			0x2
+#define TC_IDLE_REQUEST			(0x0000000c)
+
+#define IRQ_LEVEL2			(1<<0)
+#define IRQ_KEYBOARD			(1<<1)
+#define IRQ_UART2			(1<<15)
+
+#define PDE_BIT				0x08
+#define PWD_EN_BIT			0x04
+#define EN_PERCK_BIT			0x04
+
+#define OMAP1510_DEEP_SLEEP_REQUEST	0x0ec7
+#define OMAP1510_BIG_SLEEP_REQUEST	0x0cc5
+#define OMAP1510_IDLE_LOOP_REQUEST	0x0c00
+#define OMAP1510_IDLE_CLOCK_DOMAINS	0x2
+
+/* Both big sleep and deep sleep use same values. Difference is in ULPD. */
+#define OMAP1610_IDLECT1_SLEEP_VAL	0x13c7
+#define OMAP1610_IDLECT2_SLEEP_VAL	0x09c7
+#define OMAP1610_IDLECT3_VAL		0x3f
+#define OMAP1610_IDLECT3_SLEEP_ORMASK	0x2c
+#define OMAP1610_IDLECT3		0xfffece24
+#define OMAP1610_IDLE_LOOP_REQUEST	0x0400
+
+#define OMAP730_IDLECT1_SLEEP_VAL	0x16c7
+#define OMAP730_IDLECT2_SLEEP_VAL	0x09c7
+#define OMAP730_IDLECT3_VAL		0x3f
+#define OMAP730_IDLECT3		0xfffece24
+#define OMAP730_IDLE_LOOP_REQUEST	0x0C00
+
+#if     !defined(CONFIG_ARCH_OMAP730) && \
+	!defined(CONFIG_ARCH_OMAP15XX) && \
+	!defined(CONFIG_ARCH_OMAP16XX) && \
+	!defined(CONFIG_ARCH_OMAP24XX)
+#error "Power management for this processor not implemented yet"
+#endif
+
+#ifndef __ASSEMBLER__
+
+#include <linux/clk.h>
+
+extern void prevent_idle_sleep(void);
+extern void allow_idle_sleep(void);
+
+/**
+ * clk_deny_idle - Prevents the clock from being idled during MPU idle
+ * @clk: clock signal handle
+ */
+void clk_deny_idle(struct clk *clk);
+
+/**
+ * clk_allow_idle - Counters previous clk_deny_idle
+ * @clk: clock signal handle
+ */
+void clk_deny_idle(struct clk *clk);
+
+extern void omap_pm_idle(void);
+extern void omap_pm_suspend(void);
+extern void omap730_cpu_suspend(unsigned short, unsigned short);
+extern void omap1510_cpu_suspend(unsigned short, unsigned short);
+extern void omap1610_cpu_suspend(unsigned short, unsigned short);
+extern void omap24xx_cpu_suspend(u32 dll_ctrl, u32 cpu_revision);
+extern void omap730_idle_loop_suspend(void);
+extern void omap1510_idle_loop_suspend(void);
+extern void omap1610_idle_loop_suspend(void);
+extern void omap24xx_idle_loop_suspend(void);
+
+extern unsigned int omap730_cpu_suspend_sz;
+extern unsigned int omap1510_cpu_suspend_sz;
+extern unsigned int omap1610_cpu_suspend_sz;
+extern unsigned int omap24xx_cpu_suspend_sz;
+extern unsigned int omap730_idle_loop_suspend_sz;
+extern unsigned int omap1510_idle_loop_suspend_sz;
+extern unsigned int omap1610_idle_loop_suspend_sz;
+extern unsigned int omap24xx_idle_loop_suspend_sz;
+
+#ifdef CONFIG_OMAP_SERIAL_WAKE
+extern void omap_serial_wake_trigger(int enable);
+#else
+#define omap_serial_wakeup_init()	{}
+#define omap_serial_wake_trigger(x)	{}
+#endif	/* CONFIG_OMAP_SERIAL_WAKE */
+
+#define ARM_SAVE(x) arm_sleep_save[ARM_SLEEP_SAVE_##x] = omap_readl(x)
+#define ARM_RESTORE(x) omap_writel((arm_sleep_save[ARM_SLEEP_SAVE_##x]), (x))
+#define ARM_SHOW(x) arm_sleep_save[ARM_SLEEP_SAVE_##x]
+
+#define DSP_SAVE(x) dsp_sleep_save[DSP_SLEEP_SAVE_##x] = __raw_readw(x)
+#define DSP_RESTORE(x) __raw_writew((dsp_sleep_save[DSP_SLEEP_SAVE_##x]), (x))
+#define DSP_SHOW(x) dsp_sleep_save[DSP_SLEEP_SAVE_##x]
+
+#define ULPD_SAVE(x) ulpd_sleep_save[ULPD_SLEEP_SAVE_##x] = omap_readw(x)
+#define ULPD_RESTORE(x) omap_writew((ulpd_sleep_save[ULPD_SLEEP_SAVE_##x]), (x))
+#define ULPD_SHOW(x) ulpd_sleep_save[ULPD_SLEEP_SAVE_##x]
+
+#define MPUI730_SAVE(x) mpui730_sleep_save[MPUI730_SLEEP_SAVE_##x] = omap_readl(x)
+#define MPUI730_RESTORE(x) omap_writel((mpui730_sleep_save[MPUI730_SLEEP_SAVE_##x]), (x))
+#define MPUI730_SHOW(x) mpui730_sleep_save[MPUI730_SLEEP_SAVE_##x]
+
+#define MPUI1510_SAVE(x) mpui1510_sleep_save[MPUI1510_SLEEP_SAVE_##x] = omap_readl(x)
+#define MPUI1510_RESTORE(x) omap_writel((mpui1510_sleep_save[MPUI1510_SLEEP_SAVE_##x]), (x))
+#define MPUI1510_SHOW(x) mpui1510_sleep_save[MPUI1510_SLEEP_SAVE_##x]
+
+#define MPUI1610_SAVE(x) mpui1610_sleep_save[MPUI1610_SLEEP_SAVE_##x] = omap_readl(x)
+#define MPUI1610_RESTORE(x) omap_writel((mpui1610_sleep_save[MPUI1610_SLEEP_SAVE_##x]), (x))
+#define MPUI1610_SHOW(x) mpui1610_sleep_save[MPUI1610_SLEEP_SAVE_##x]
+
+#define OMAP24XX_SAVE(x) omap24xx_sleep_save[OMAP24XX_SLEEP_SAVE_##x] = x
+#define OMAP24XX_RESTORE(x) x = omap24xx_sleep_save[OMAP24XX_SLEEP_SAVE_##x]
+#define OMAP24XX_SHOW(x) omap24xx_sleep_save[OMAP24XX_SLEEP_SAVE_##x]
+
+/*
+ * List of global OMAP registers to preserve.
+ * More ones like CP and general purpose register values are preserved
+ * with the stack pointer in sleep.S.
+ */
+
+enum arm_save_state {
+	ARM_SLEEP_SAVE_START = 0,
+	/*
+	 * MPU control registers 32 bits
+	 */
+	ARM_SLEEP_SAVE_ARM_CKCTL,
+	ARM_SLEEP_SAVE_ARM_IDLECT1,
+	ARM_SLEEP_SAVE_ARM_IDLECT2,
+	ARM_SLEEP_SAVE_ARM_IDLECT3,
+	ARM_SLEEP_SAVE_ARM_EWUPCT,
+	ARM_SLEEP_SAVE_ARM_RSTCT1,
+	ARM_SLEEP_SAVE_ARM_RSTCT2,
+	ARM_SLEEP_SAVE_ARM_SYSST,
+	ARM_SLEEP_SAVE_SIZE
+};
+
+enum dsp_save_state {
+	DSP_SLEEP_SAVE_START = 0,
+	/*
+	 * DSP registers 16 bits
+	 */
+	DSP_SLEEP_SAVE_DSP_IDLECT2,
+	DSP_SLEEP_SAVE_SIZE
+};
+
+enum ulpd_save_state {
+	ULPD_SLEEP_SAVE_START = 0,
+	/*
+	 * ULPD registers 16 bits
+	 */
+	ULPD_SLEEP_SAVE_ULPD_IT_STATUS,
+	ULPD_SLEEP_SAVE_ULPD_CLOCK_CTRL,
+	ULPD_SLEEP_SAVE_ULPD_SOFT_REQ,
+	ULPD_SLEEP_SAVE_ULPD_STATUS_REQ,
+	ULPD_SLEEP_SAVE_ULPD_DPLL_CTRL,
+	ULPD_SLEEP_SAVE_ULPD_POWER_CTRL,
+	ULPD_SLEEP_SAVE_SIZE
+};
+
+enum mpui1510_save_state {
+	MPUI1510_SLEEP_SAVE_START = 0,
+	/*
+	 * MPUI registers 32 bits
+	 */
+	MPUI1510_SLEEP_SAVE_MPUI_CTRL,
+	MPUI1510_SLEEP_SAVE_MPUI_DSP_BOOT_CONFIG,
+	MPUI1510_SLEEP_SAVE_MPUI_DSP_API_CONFIG,
+	MPUI1510_SLEEP_SAVE_MPUI_DSP_STATUS,
+	MPUI1510_SLEEP_SAVE_EMIFF_SDRAM_CONFIG,
+	MPUI1510_SLEEP_SAVE_EMIFS_CONFIG,
+	MPUI1510_SLEEP_SAVE_OMAP_IH1_MIR,
+	MPUI1510_SLEEP_SAVE_OMAP_IH2_MIR,
+#if defined(CONFIG_ARCH_OMAP15XX)
+	MPUI1510_SLEEP_SAVE_SIZE
+#else
+	MPUI1510_SLEEP_SAVE_SIZE = 0
+#endif
+};
+
+enum mpui730_save_state {
+	MPUI730_SLEEP_SAVE_START = 0,
+	/*
+	 * MPUI registers 32 bits
+	 */
+	MPUI730_SLEEP_SAVE_MPUI_CTRL,
+	MPUI730_SLEEP_SAVE_MPUI_DSP_BOOT_CONFIG,
+	MPUI730_SLEEP_SAVE_MPUI_DSP_API_CONFIG,
+	MPUI730_SLEEP_SAVE_MPUI_DSP_STATUS,
+	MPUI730_SLEEP_SAVE_EMIFF_SDRAM_CONFIG,
+	MPUI730_SLEEP_SAVE_EMIFS_CONFIG,
+	MPUI730_SLEEP_SAVE_OMAP_IH1_MIR,
+	MPUI730_SLEEP_SAVE_OMAP_IH2_0_MIR,
+	MPUI730_SLEEP_SAVE_OMAP_IH2_1_MIR,
+#if defined(CONFIG_ARCH_OMAP730)
+	MPUI730_SLEEP_SAVE_SIZE
+#else
+	MPUI730_SLEEP_SAVE_SIZE = 0
+#endif
+};
+
+enum mpui1610_save_state {
+	MPUI1610_SLEEP_SAVE_START = 0,
+	/*
+	 * MPUI registers 32 bits
+	 */
+	MPUI1610_SLEEP_SAVE_MPUI_CTRL,
+	MPUI1610_SLEEP_SAVE_MPUI_DSP_BOOT_CONFIG,
+	MPUI1610_SLEEP_SAVE_MPUI_DSP_API_CONFIG,
+	MPUI1610_SLEEP_SAVE_MPUI_DSP_STATUS,
+	MPUI1610_SLEEP_SAVE_EMIFF_SDRAM_CONFIG,
+	MPUI1610_SLEEP_SAVE_EMIFS_CONFIG,
+	MPUI1610_SLEEP_SAVE_OMAP_IH1_MIR,
+	MPUI1610_SLEEP_SAVE_OMAP_IH2_0_MIR,
+	MPUI1610_SLEEP_SAVE_OMAP_IH2_1_MIR,
+	MPUI1610_SLEEP_SAVE_OMAP_IH2_2_MIR,
+	MPUI1610_SLEEP_SAVE_OMAP_IH2_3_MIR,
+#if defined(CONFIG_ARCH_OMAP16XX)
+	MPUI1610_SLEEP_SAVE_SIZE
+#else
+	MPUI1610_SLEEP_SAVE_SIZE = 0
+#endif
+};
+
+enum omap24xx_save_state {
+	OMAP24XX_SLEEP_SAVE_START = 0,
+	OMAP24XX_SLEEP_SAVE_INTC_MIR0,
+	OMAP24XX_SLEEP_SAVE_INTC_MIR1,
+	OMAP24XX_SLEEP_SAVE_INTC_MIR2,
+
+	OMAP24XX_SLEEP_SAVE_CM_CLKSTCTRL_MPU,
+	OMAP24XX_SLEEP_SAVE_CM_CLKSTCTRL_CORE,
+	OMAP24XX_SLEEP_SAVE_CM_CLKSTCTRL_GFX,
+	OMAP24XX_SLEEP_SAVE_CM_CLKSTCTRL_DSP,
+	OMAP24XX_SLEEP_SAVE_CM_CLKSTCTRL_MDM,
+
+	OMAP24XX_SLEEP_SAVE_PM_PWSTCTRL_MPU,
+	OMAP24XX_SLEEP_SAVE_PM_PWSTCTRL_CORE,
+	OMAP24XX_SLEEP_SAVE_PM_PWSTCTRL_GFX,
+	OMAP24XX_SLEEP_SAVE_PM_PWSTCTRL_DSP,
+	OMAP24XX_SLEEP_SAVE_PM_PWSTCTRL_MDM,
+
+	OMAP24XX_SLEEP_SAVE_CM_IDLEST1_CORE,
+	OMAP24XX_SLEEP_SAVE_CM_IDLEST2_CORE,
+	OMAP24XX_SLEEP_SAVE_CM_IDLEST3_CORE,
+	OMAP24XX_SLEEP_SAVE_CM_IDLEST4_CORE,
+	OMAP24XX_SLEEP_SAVE_CM_IDLEST_GFX,
+	OMAP24XX_SLEEP_SAVE_CM_IDLEST_WKUP,
+	OMAP24XX_SLEEP_SAVE_CM_IDLEST_CKGEN,
+	OMAP24XX_SLEEP_SAVE_CM_IDLEST_DSP,
+	OMAP24XX_SLEEP_SAVE_CM_IDLEST_MDM,
+
+	OMAP24XX_SLEEP_SAVE_CM_AUTOIDLE1_CORE,
+	OMAP24XX_SLEEP_SAVE_CM_AUTOIDLE2_CORE,
+	OMAP24XX_SLEEP_SAVE_CM_AUTOIDLE3_CORE,
+	OMAP24XX_SLEEP_SAVE_CM_AUTOIDLE4_CORE,
+	OMAP24XX_SLEEP_SAVE_CM_AUTOIDLE_WKUP,
+	OMAP24XX_SLEEP_SAVE_CM_AUTOIDLE_PLL,
+	OMAP24XX_SLEEP_SAVE_CM_AUTOIDLE_DSP,
+	OMAP24XX_SLEEP_SAVE_CM_AUTOIDLE_MDM,
+
+	OMAP24XX_SLEEP_SAVE_CM_FCLKEN1_CORE,
+	OMAP24XX_SLEEP_SAVE_CM_FCLKEN2_CORE,
+	OMAP24XX_SLEEP_SAVE_CM_ICLKEN1_CORE,
+	OMAP24XX_SLEEP_SAVE_CM_ICLKEN2_CORE,
+	OMAP24XX_SLEEP_SAVE_CM_ICLKEN3_CORE,
+	OMAP24XX_SLEEP_SAVE_CM_ICLKEN4_CORE,
+	OMAP24XX_SLEEP_SAVE_GPIO1_IRQENABLE1,
+	OMAP24XX_SLEEP_SAVE_GPIO2_IRQENABLE1,
+	OMAP24XX_SLEEP_SAVE_GPIO3_IRQENABLE1,
+	OMAP24XX_SLEEP_SAVE_GPIO4_IRQENABLE1,
+	OMAP24XX_SLEEP_SAVE_GPIO3_OE,
+	OMAP24XX_SLEEP_SAVE_GPIO4_OE,
+	OMAP24XX_SLEEP_SAVE_GPIO3_RISINGDETECT,
+	OMAP24XX_SLEEP_SAVE_GPIO3_FALLINGDETECT,
+	OMAP24XX_SLEEP_SAVE_CONTROL_PADCONF_SPI1_NCS2,
+	OMAP24XX_SLEEP_SAVE_CONTROL_PADCONF_MCBSP1_DX,
+	OMAP24XX_SLEEP_SAVE_CONTROL_PADCONF_SSI1_FLAG_TX,
+	OMAP24XX_SLEEP_SAVE_CONTROL_PADCONF_SYS_NIRQW0,
+	OMAP24XX_SLEEP_SAVE_SIZE
+};
+
+#endif /* ASSEMBLER */
+#endif /* __ASM_ARCH_OMAP_PM_H */
diff --git a/include/asm-arm/arch-omap/prcm.h b/arch/arm/plat-omap/include/mach/prcm.h
index 7bcaf94bde9f..56eba0fd6f6a 100644
--- a/include/asm-arm/arch-omap/prcm.h
+++ b/arch/arm/plat-omap/include/mach/prcm.h
@@ -1,5 +1,5 @@
 /*
- * linux/include/asm-arm/arch-omap/prcm.h
+ * arch/arm/plat-omap/include/mach/prcm.h
  *
  * Access definations for use in OMAP24XX clock and power management
  *
diff --git a/include/asm-arm/arch-omap/sdrc.h b/arch/arm/plat-omap/include/mach/sdrc.h
index 673b3965befc..787b7acec546 100644
--- a/include/asm-arm/arch-omap/sdrc.h
+++ b/arch/arm/plat-omap/include/mach/sdrc.h
@@ -14,7 +14,7 @@
  * published by the Free Software Foundation.
  */
 
-#include <asm/arch/io.h>
+#include <mach/io.h>
 
 /* SDRC register offsets - read/write with sdrc_{read,write}_reg() */
 
diff --git a/arch/arm/plat-omap/include/mach/serial.h b/arch/arm/plat-omap/include/mach/serial.h
new file mode 100644
index 000000000000..cc6bfa51ccb5
--- /dev/null
+++ b/arch/arm/plat-omap/include/mach/serial.h
@@ -0,0 +1,37 @@
+/*
+ *  arch/arm/plat-omap/include/mach/serial.h
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef __ASM_ARCH_SERIAL_H
+#define __ASM_ARCH_SERIAL_H
+
+#if defined(CONFIG_ARCH_OMAP1)
+/* OMAP1 serial ports */
+#define OMAP_UART1_BASE		0xfffb0000
+#define OMAP_UART2_BASE		0xfffb0800
+#define OMAP_UART3_BASE		0xfffb9800
+#elif defined(CONFIG_ARCH_OMAP2)
+/* OMAP2 serial ports */
+#define OMAP_UART1_BASE		0x4806a000
+#define OMAP_UART2_BASE		0x4806c000
+#define OMAP_UART3_BASE		0x4806e000
+#endif
+
+#define OMAP_MAX_NR_PORTS	3
+#define OMAP1510_BASE_BAUD	(12000000/16)
+#define OMAP16XX_BASE_BAUD	(48000000/16)
+
+#define is_omap_port(p)	({int __ret = 0;			\
+			if (p == IO_ADDRESS(OMAP_UART1_BASE) ||	\
+			    p == IO_ADDRESS(OMAP_UART2_BASE) ||	\
+			    p == IO_ADDRESS(OMAP_UART3_BASE))	\
+				__ret = 1;			\
+			__ret;					\
+			})
+
+#endif
diff --git a/include/asm-arm/arch-omap/sram.h b/arch/arm/plat-omap/include/mach/sram.h
index be59f4a9828b..e09323449981 100644
--- a/include/asm-arm/arch-omap/sram.h
+++ b/arch/arm/plat-omap/include/mach/sram.h
@@ -1,5 +1,5 @@
 /*
- * linux/include/asm-arm/arch-omap/sram.h
+ * arch/arm/plat-omap/include/mach/sram.h
  *
  * Interface for functions that need to be run in internal SRAM
  *
diff --git a/arch/arm/plat-omap/include/mach/system.h b/arch/arm/plat-omap/include/mach/system.h
new file mode 100644
index 000000000000..06a28c7b98de
--- /dev/null
+++ b/arch/arm/plat-omap/include/mach/system.h
@@ -0,0 +1,49 @@
+/*
+ * Copied from arch/arm/mach-sa1100/include/mach/system.h
+ * Copyright (c) 1999 Nicolas Pitre <nico@cam.org>
+ */
+#ifndef __ASM_ARCH_SYSTEM_H
+#define __ASM_ARCH_SYSTEM_H
+#include <linux/clk.h>
+
+#include <asm/mach-types.h>
+#include <mach/hardware.h>
+
+#ifndef CONFIG_MACH_VOICEBLUE
+#define voiceblue_reset()		do {} while (0)
+#endif
+
+extern void omap_prcm_arch_reset(char mode);
+
+static inline void arch_idle(void)
+{
+	cpu_do_idle();
+}
+
+static inline void omap1_arch_reset(char mode)
+{
+	/*
+	 * Workaround for 5912/1611b bug mentioned in sprz209d.pdf p. 28
+	 * "Global Software Reset Affects Traffic Controller Frequency".
+	 */
+	if (cpu_is_omap5912()) {
+		omap_writew(omap_readw(DPLL_CTL) & ~(1 << 4),
+				 DPLL_CTL);
+		omap_writew(0x8, ARM_RSTCT1);
+	}
+
+	if (machine_is_voiceblue())
+		voiceblue_reset();
+	else
+		omap_writew(1, ARM_RSTCT1);
+}
+
+static inline void arch_reset(char mode)
+{
+	if (!cpu_is_omap24xx())
+		omap1_arch_reset(mode);
+	else
+		omap_prcm_arch_reset(mode);
+}
+
+#endif
diff --git a/include/asm-arm/arch-omap/tc.h b/arch/arm/plat-omap/include/mach/tc.h
index 65a9c82d3bf7..d2fcd789bb9a 100644
--- a/include/asm-arm/arch-omap/tc.h
+++ b/arch/arm/plat-omap/include/mach/tc.h
@@ -1,5 +1,5 @@
 /*
- * linux/include/asm-arm/arch-omap/tc.h
+ * arch/arm/plat-omap/include/mach/tc.h
  *
  * OMAP Traffic Controller
  *
diff --git a/arch/arm/plat-omap/include/mach/timex.h b/arch/arm/plat-omap/include/mach/timex.h
new file mode 100644
index 000000000000..6d35767bc48f
--- /dev/null
+++ b/arch/arm/plat-omap/include/mach/timex.h
@@ -0,0 +1,41 @@
+/*
+ * arch/arm/plat-omap/include/mach/timex.h
+ *
+ * Copyright (C) 2000 RidgeRun, Inc.
+ * Author:  Greg Lonnon <glonnon@ridgerun.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * You should have received a copy of the  GNU General Public License along
+ * with this program; if not, write  to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#if !defined(__ASM_ARCH_OMAP_TIMEX_H)
+#define __ASM_ARCH_OMAP_TIMEX_H
+
+/*
+ * OMAP 32KHz timer updates time one jiffie at a time from a secondary timer,
+ * and that's why the CLOCK_TICK_RATE is not 32768.
+ */
+#ifdef CONFIG_OMAP_32K_TIMER
+#define CLOCK_TICK_RATE		(CONFIG_OMAP_32K_TIMER_HZ)
+#else
+#define CLOCK_TICK_RATE		(HZ * 100000UL)
+#endif
+
+#endif /* __ASM_ARCH_OMAP_TIMEX_H */
diff --git a/arch/arm/plat-omap/include/mach/uncompress.h b/arch/arm/plat-omap/include/mach/uncompress.h
new file mode 100644
index 000000000000..0814c5f210c3
--- /dev/null
+++ b/arch/arm/plat-omap/include/mach/uncompress.h
@@ -0,0 +1,83 @@
+/*
+ * arch/arm/plat-omap/include/mach/uncompress.h
+ *
+ * Serial port stubs for kernel decompress status messages
+ *
+ * Initially based on:
+ * linux-2.4.15-rmk1-dsplinux1.6/arch/arm/plat-omap/include/mach1510/uncompress.h
+ * Copyright (C) 2000 RidgeRun, Inc.
+ * Author: Greg Lonnon <glonnon@ridgerun.com>
+ *
+ * Rewritten by:
+ * Author: <source@mvista.com>
+ * 2004 (c) MontaVista Software, Inc.
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+#include <linux/types.h>
+#include <linux/serial_reg.h>
+#include <mach/serial.h>
+
+unsigned int system_rev;
+
+#define UART_OMAP_MDR1		0x08	/* mode definition register */
+#define OMAP_ID_730		0x355F
+#define ID_MASK			0x7fff
+#define check_port(base, shift) ((base[UART_OMAP_MDR1 << shift] & 7) == 0)
+#define omap_get_id() ((*(volatile unsigned int *)(0xfffed404)) >> 12) & ID_MASK
+
+static void putc(int c)
+{
+	volatile u8 * uart = 0;
+	int shift = 2;
+
+#ifdef CONFIG_MACH_OMAP_PALMTE
+	return;
+#endif
+
+#ifdef CONFIG_ARCH_OMAP
+#ifdef	CONFIG_OMAP_LL_DEBUG_UART3
+	uart = (volatile u8 *)(OMAP_UART3_BASE);
+#elif defined(CONFIG_OMAP_LL_DEBUG_UART2)
+	uart = (volatile u8 *)(OMAP_UART2_BASE);
+#else
+	uart = (volatile u8 *)(OMAP_UART1_BASE);
+#endif
+
+#ifdef CONFIG_ARCH_OMAP1
+	/* Determine which serial port to use */
+	do {
+		/* MMU is not on, so cpu_is_omapXXXX() won't work here */
+		unsigned int omap_id = omap_get_id();
+
+		if (omap_id == OMAP_ID_730)
+			shift = 0;
+
+		if (check_port(uart, shift))
+			break;
+		/* Silent boot if no serial ports are enabled. */
+		return;
+	} while (0);
+#endif /* CONFIG_ARCH_OMAP1 */
+#endif
+
+	/*
+	 * Now, xmit each character
+	 */
+	while (!(uart[UART_LSR << shift] & UART_LSR_THRE))
+		barrier();
+	uart[UART_TX << shift] = c;
+}
+
+static inline void flush(void)
+{
+}
+
+/*
+ * nothing to do
+ */
+#define arch_decomp_setup()
+#define arch_decomp_wdog()
diff --git a/include/asm-arm/arch-omap/usb.h b/arch/arm/plat-omap/include/mach/usb.h
index ddf1861e6df9..a56a610950c2 100644
--- a/include/asm-arm/arch-omap/usb.h
+++ b/arch/arm/plat-omap/include/mach/usb.h
@@ -3,7 +3,7 @@
 #ifndef	__ASM_ARCH_OMAP_USB_H
 #define	__ASM_ARCH_OMAP_USB_H
 
-#include <asm/arch/board.h>
+#include <mach/board.h>
 
 /*-------------------------------------------------------------------------*/
 
diff --git a/arch/arm/plat-omap/include/mach/vmalloc.h b/arch/arm/plat-omap/include/mach/vmalloc.h
new file mode 100644
index 000000000000..dc104cd96197
--- /dev/null
+++ b/arch/arm/plat-omap/include/mach/vmalloc.h
@@ -0,0 +1,21 @@
+/*
+ *  arch/arm/plat-omap/include/mach/vmalloc.h
+ *
+ *  Copyright (C) 2000 Russell King.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+#define VMALLOC_END	  (PAGE_OFFSET + 0x10000000)
+
diff --git a/arch/arm/plat-omap/mailbox.c b/arch/arm/plat-omap/mailbox.c
index ff1413eae0b8..1d7aec1a691a 100644
--- a/arch/arm/plat-omap/mailbox.c
+++ b/arch/arm/plat-omap/mailbox.c
@@ -31,7 +31,7 @@
 #include <linux/err.h>
 #include <linux/delay.h>
 #include <asm/io.h>
-#include <asm/arch/mailbox.h>
+#include <mach/mailbox.h>
 #include "mailbox.h"
 
 static struct omap_mbox *mboxes;
diff --git a/arch/arm/plat-omap/mcbsp.c b/arch/arm/plat-omap/mcbsp.c
index c7f74064696c..d0844050f2d2 100644
--- a/arch/arm/plat-omap/mcbsp.c
+++ b/arch/arm/plat-omap/mcbsp.c
@@ -24,8 +24,8 @@
 #include <linux/delay.h>
 #include <linux/io.h>
 
-#include <asm/arch/dma.h>
-#include <asm/arch/mcbsp.h>
+#include <mach/dma.h>
+#include <mach/mcbsp.h>
 
 static struct omap_mcbsp mcbsp[OMAP_MAX_MCBSP_COUNT];
 
diff --git a/arch/arm/plat-omap/mux.c b/arch/arm/plat-omap/mux.c
index 6f3f459731c8..847df208c46c 100644
--- a/arch/arm/plat-omap/mux.c
+++ b/arch/arm/plat-omap/mux.c
@@ -28,7 +28,7 @@
 #include <asm/system.h>
 #include <asm/io.h>
 #include <linux/spinlock.h>
-#include <asm/arch/mux.h>
+#include <mach/mux.h>
 
 #ifdef CONFIG_OMAP_MUX
 
diff --git a/arch/arm/plat-omap/ocpi.c b/arch/arm/plat-omap/ocpi.c
index b5d307026c82..8bdbf979a257 100644
--- a/arch/arm/plat-omap/ocpi.c
+++ b/arch/arm/plat-omap/ocpi.c
@@ -33,7 +33,7 @@
 #include <linux/clk.h>
 
 #include <asm/io.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 
 #define OCPI_BASE		0xfffec320
 #define OCPI_FAULT		(OCPI_BASE + 0x00)
diff --git a/arch/arm/plat-omap/sram.c b/arch/arm/plat-omap/sram.c
index 554ee58e1294..ac67eeb6ca6a 100644
--- a/arch/arm/plat-omap/sram.c
+++ b/arch/arm/plat-omap/sram.c
@@ -22,10 +22,10 @@
 
 #include <asm/mach/map.h>
 
-#include <asm/arch/sram.h>
-#include <asm/arch/board.h>
+#include <mach/sram.h>
+#include <mach/board.h>
 
-#include <asm/arch/control.h>
+#include <mach/control.h>
 
 #if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
 # include "../mach-omap2/prm.h"
diff --git a/arch/arm/plat-omap/usb.c b/arch/arm/plat-omap/usb.c
index 2699c16d4da0..777485e0636b 100644
--- a/arch/arm/plat-omap/usb.c
+++ b/arch/arm/plat-omap/usb.c
@@ -31,12 +31,12 @@
 #include <asm/io.h>
 #include <asm/irq.h>
 #include <asm/system.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 
-#include <asm/arch/control.h>
-#include <asm/arch/mux.h>
-#include <asm/arch/usb.h>
-#include <asm/arch/board.h>
+#include <mach/control.h>
+#include <mach/mux.h>
+#include <mach/usb.h>
+#include <mach/board.h>
 
 #ifdef CONFIG_ARCH_OMAP1
 
diff --git a/include/asm-arm/plat-orion/cache-feroceon-l2.h b/arch/arm/plat-orion/include/plat/cache-feroceon-l2.h
index ba4e016d3ec0..06f982d55697 100644
--- a/include/asm-arm/plat-orion/cache-feroceon-l2.h
+++ b/arch/arm/plat-orion/include/plat/cache-feroceon-l2.h
@@ -1,5 +1,5 @@
 /*
- * include/asm-arm/plat-orion/cache-feroceon-l2.h
+ * arch/arm/plat-orion/include/plat/cache-feroceon-l2.h
  *
  * Copyright (C) 2008 Marvell Semiconductor
  *
diff --git a/arch/arm/plat-orion/include/plat/ehci-orion.h b/arch/arm/plat-orion/include/plat/ehci-orion.h
new file mode 100644
index 000000000000..64343051095a
--- /dev/null
+++ b/arch/arm/plat-orion/include/plat/ehci-orion.h
@@ -0,0 +1,19 @@
+/*
+ * arch/arm/plat-orion/include/plat/ehci-orion.h
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __PLAT_EHCI_ORION_H
+#define __PLAT_EHCI_ORION_H
+
+#include <linux/mbus.h>
+
+struct orion_ehci_data {
+	struct mbus_dram_target_info	*dram;
+};
+
+
+#endif
diff --git a/arch/arm/plat-orion/include/plat/irq.h b/arch/arm/plat-orion/include/plat/irq.h
new file mode 100644
index 000000000000..f05eeab94968
--- /dev/null
+++ b/arch/arm/plat-orion/include/plat/irq.h
@@ -0,0 +1,17 @@
+/*
+ * arch/arm/plat-orion/include/plat/irq.h
+ *
+ * Marvell Orion SoC IRQ handling.
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __PLAT_IRQ_H
+#define __PLAT_IRQ_H
+
+void orion_irq_init(unsigned int irq_start, void __iomem *maskaddr);
+
+
+#endif
diff --git a/include/asm-arm/plat-orion/mv_xor.h b/arch/arm/plat-orion/include/plat/mv_xor.h
index c349e8ff5cc0..bd5f3bdb4ae3 100644
--- a/include/asm-arm/plat-orion/mv_xor.h
+++ b/arch/arm/plat-orion/include/plat/mv_xor.h
@@ -1,9 +1,11 @@
 /*
+ * arch/arm/plat-orion/include/plat/mv_xor.h
+ *
  * Marvell XOR platform device data definition file.
  */
 
-#ifndef __ASM_PLAT_ORION_MV_XOR_H
-#define __ASM_PLAT_ORION_MV_XOR_H
+#ifndef __PLAT_MV_XOR_H
+#define __PLAT_MV_XOR_H
 
 #include <linux/dmaengine.h>
 #include <linux/mbus.h>
diff --git a/include/asm-arm/plat-orion/orion_nand.h b/arch/arm/plat-orion/include/plat/orion_nand.h
index ad4ce94c1998..d6a4cfa37785 100644
--- a/include/asm-arm/plat-orion/orion_nand.h
+++ b/arch/arm/plat-orion/include/plat/orion_nand.h
@@ -1,13 +1,13 @@
 /*
- * include/asm-arm/plat-orion/orion_nand.h
+ * arch/arm/plat-orion/include/plat/orion_nand.h
  *
  * This file is licensed under the terms of the GNU General Public
  * License version 2.  This program is licensed "as is" without any
  * warranty of any kind, whether express or implied.
  */
 
-#ifndef __ASM_PLAT_ORION_ORION_NAND_H
-#define __ASM_PLAT_ORION_ORION_NAND_H
+#ifndef __PLAT_ORION_NAND_H
+#define __PLAT_ORION_NAND_H
 
 /*
  * Device bus NAND private data
diff --git a/include/asm-arm/plat-orion/pcie.h b/arch/arm/plat-orion/include/plat/pcie.h
index e61b7bd97af5..3ebfef72b4e7 100644
--- a/include/asm-arm/plat-orion/pcie.h
+++ b/arch/arm/plat-orion/include/plat/pcie.h
@@ -1,5 +1,5 @@
 /*
- * include/asm-arm/plat-orion/pcie.h
+ * arch/arm/plat-orion/include/plat/pcie.h
  *
  * Marvell Orion SoC PCIe handling.
  *
@@ -8,8 +8,8 @@
  * warranty of any kind, whether express or implied.
  */
 
-#ifndef __ASM_PLAT_ORION_PCIE_H
-#define __ASM_PLAT_ORION_PCIE_H
+#ifndef __PLAT_PCIE_H
+#define __PLAT_PCIE_H
 
 u32 orion_pcie_dev_id(void __iomem *base);
 u32 orion_pcie_rev(void __iomem *base);
diff --git a/arch/arm/plat-orion/include/plat/time.h b/arch/arm/plat-orion/include/plat/time.h
new file mode 100644
index 000000000000..c06ca35f3613
--- /dev/null
+++ b/arch/arm/plat-orion/include/plat/time.h
@@ -0,0 +1,17 @@
+/*
+ * arch/arm/plat-orion/include/plat/time.h
+ *
+ * Marvell Orion SoC time handling.
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __PLAT_TIME_H
+#define __PLAT_TIME_H
+
+void orion_time_init(unsigned int irq, unsigned int tclk);
+
+
+#endif
diff --git a/arch/arm/plat-orion/irq.c b/arch/arm/plat-orion/irq.c
index fe66a1835169..3f9d34fc738c 100644
--- a/arch/arm/plat-orion/irq.c
+++ b/arch/arm/plat-orion/irq.c
@@ -12,7 +12,7 @@
 #include <linux/init.h>
 #include <linux/irq.h>
 #include <linux/io.h>
-#include <asm/plat-orion/irq.h>
+#include <plat/irq.h>
 
 static void orion_irq_mask(u32 irq)
 {
diff --git a/arch/arm/plat-orion/pcie.c b/arch/arm/plat-orion/pcie.c
index ca32c60e14d7..883902fead89 100644
--- a/arch/arm/plat-orion/pcie.c
+++ b/arch/arm/plat-orion/pcie.c
@@ -12,7 +12,7 @@
 #include <linux/pci.h>
 #include <linux/mbus.h>
 #include <asm/mach/pci.h>
-#include <asm/plat-orion/pcie.h>
+#include <plat/pcie.h>
 
 /*
  * PCIe unit register offsets.
diff --git a/arch/arm/plat-orion/time.c b/arch/arm/plat-orion/time.c
index 93c4ef9f0067..544d6b327f3a 100644
--- a/arch/arm/plat-orion/time.c
+++ b/arch/arm/plat-orion/time.c
@@ -16,7 +16,7 @@
 #include <linux/interrupt.h>
 #include <linux/irq.h>
 #include <asm/mach/time.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 
 /*
  * Number of timer ticks per jiffy.
diff --git a/arch/arm/plat-s3c24xx/Kconfig b/arch/arm/plat-s3c24xx/Kconfig
index 5e28c217b8c2..0af3872fb763 100644
--- a/arch/arm/plat-s3c24xx/Kconfig
+++ b/arch/arm/plat-s3c24xx/Kconfig
@@ -9,7 +9,7 @@ config PLAT_S3C24XX
 	depends on ARCH_S3C2410
 	default y if ARCH_S3C2410
 	select NO_IOPORT
-	select HAVE_GPIO_LIB
+	select ARCH_REQUIRE_GPIOLIB
 	help
 	  Base platform code for any Samsung S3C24XX device
 
diff --git a/arch/arm/plat-s3c24xx/clock.c b/arch/arm/plat-s3c24xx/clock.c
index 3ac8d8d781b3..54d4b8e2263c 100644
--- a/arch/arm/plat-s3c24xx/clock.c
+++ b/arch/arm/plat-s3c24xx/clock.c
@@ -40,12 +40,12 @@
 #include <linux/mutex.h>
 #include <linux/delay.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/irq.h>
 #include <asm/io.h>
 
-#include <asm/arch/regs-clock.h>
-#include <asm/arch/regs-gpio.h>
+#include <mach/regs-clock.h>
+#include <mach/regs-gpio.h>
 
 #include <asm/plat-s3c24xx/clock.h>
 #include <asm/plat-s3c24xx/cpu.h>
diff --git a/arch/arm/plat-s3c24xx/common-smdk.c b/arch/arm/plat-s3c24xx/common-smdk.c
index 398c7ac25296..1863a1b1bc49 100644
--- a/arch/arm/plat-s3c24xx/common-smdk.c
+++ b/arch/arm/plat-s3c24xx/common-smdk.c
@@ -31,12 +31,12 @@
 #include <asm/mach/irq.h>
 
 #include <asm/mach-types.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 #include <asm/irq.h>
 
-#include <asm/arch/regs-gpio.h>
-#include <asm/arch/leds-gpio.h>
+#include <mach/regs-gpio.h>
+#include <mach/leds-gpio.h>
 
 #include <asm/plat-s3c/nand.h>
 
diff --git a/arch/arm/plat-s3c24xx/cpu.c b/arch/arm/plat-s3c24xx/cpu.c
index f5699cadb0c3..89ce60eabd5b 100644
--- a/arch/arm/plat-s3c24xx/cpu.c
+++ b/arch/arm/plat-s3c24xx/cpu.c
@@ -30,7 +30,7 @@
 #include <linux/platform_device.h>
 #include <linux/delay.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/irq.h>
 #include <asm/io.h>
 #include <asm/delay.h>
@@ -39,9 +39,9 @@
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 
-#include <asm/arch/system-reset.h>
+#include <mach/system-reset.h>
 
-#include <asm/arch/regs-gpio.h>
+#include <mach/regs-gpio.h>
 #include <asm/plat-s3c/regs-serial.h>
 
 #include <asm/plat-s3c24xx/cpu.h>
@@ -169,9 +169,7 @@ static struct map_desc s3c_iodesc[] __initdata = {
 	IODESC_ENT(UART)
 };
 
-
-static struct cpu_table *
-s3c_lookup_cpu(unsigned long idcode)
+static struct cpu_table * __init s3c_lookup_cpu(unsigned long idcode)
 {
 	struct cpu_table *tab;
 	int count;
diff --git a/arch/arm/plat-s3c24xx/devs.c b/arch/arm/plat-s3c24xx/devs.c
index eea3b32ff798..d6fb76578b11 100644
--- a/arch/arm/plat-s3c24xx/devs.c
+++ b/arch/arm/plat-s3c24xx/devs.c
@@ -23,8 +23,8 @@
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
-#include <asm/arch/fb.h>
-#include <asm/hardware.h>
+#include <mach/fb.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 #include <asm/irq.h>
 
diff --git a/arch/arm/plat-s3c24xx/dma.c b/arch/arm/plat-s3c24xx/dma.c
index 60f162dc4fad..08c2aaf14c41 100644
--- a/arch/arm/plat-s3c24xx/dma.c
+++ b/arch/arm/plat-s3c24xx/dma.c
@@ -29,12 +29,12 @@
 
 #include <asm/system.h>
 #include <asm/irq.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 #include <asm/dma.h>
 
 #include <asm/mach/dma.h>
-#include <asm/arch/map.h>
+#include <mach/map.h>
 
 #include <asm/plat-s3c24xx/dma.h>
 
@@ -1304,7 +1304,7 @@ struct sysdev_class dma_sysclass = {
 
 /* kmem cache implementation */
 
-static void s3c2410_dma_cache_ctor(struct kmem_cache *c, void *p)
+static void s3c2410_dma_cache_ctor(void *p)
 {
 	memset(p, 0, sizeof(struct s3c2410_dma_buf));
 }
diff --git a/arch/arm/plat-s3c24xx/gpio.c b/arch/arm/plat-s3c24xx/gpio.c
index ee99dcc7f0bd..dd27334e3d7e 100644
--- a/arch/arm/plat-s3c24xx/gpio.c
+++ b/arch/arm/plat-s3c24xx/gpio.c
@@ -27,11 +27,11 @@
 #include <linux/interrupt.h>
 #include <linux/ioport.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/irq.h>
 #include <asm/io.h>
 
-#include <asm/arch/regs-gpio.h>
+#include <mach/regs-gpio.h>
 
 void s3c2410_gpio_cfgpin(unsigned int pin, unsigned int function)
 {
diff --git a/arch/arm/plat-s3c24xx/gpiolib.c b/arch/arm/plat-s3c24xx/gpiolib.c
index 825d8d0c5ca2..3caec6bad3eb 100644
--- a/arch/arm/plat-s3c24xx/gpiolib.c
+++ b/arch/arm/plat-s3c24xx/gpiolib.c
@@ -19,10 +19,10 @@
 #include <linux/io.h>
 #include <linux/gpio.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/irq.h>
 
-#include <asm/arch/regs-gpio.h>
+#include <mach/regs-gpio.h>
 
 struct s3c24xx_gpio_chip {
 	struct gpio_chip	chip;
@@ -39,7 +39,7 @@ static inline struct s3c24xx_gpio_chip *to_s3c_chip(struct gpio_chip *gpc)
  * drivers themsevles.
  */
 
-int s3c24xx_gpiolib_input(struct gpio_chip *chip, unsigned offset)
+static int s3c24xx_gpiolib_input(struct gpio_chip *chip, unsigned offset)
 {
 	struct s3c24xx_gpio_chip *ourchip = to_s3c_chip(chip);
 	void __iomem *base = ourchip->base;
@@ -58,7 +58,7 @@ int s3c24xx_gpiolib_input(struct gpio_chip *chip, unsigned offset)
 	return 0;
 }
 
-int s3c24xx_gpiolib_output(struct gpio_chip *chip,
+static int s3c24xx_gpiolib_output(struct gpio_chip *chip,
 				  unsigned offset, int value)
 {
 	struct s3c24xx_gpio_chip *ourchip = to_s3c_chip(chip);
@@ -86,7 +86,8 @@ int s3c24xx_gpiolib_output(struct gpio_chip *chip,
 	return 0;
 }
 
-void s3c24xx_gpiolib_set(struct gpio_chip *chip, unsigned offset, int value)
+static void s3c24xx_gpiolib_set(struct gpio_chip *chip,
+				unsigned offset, int value)
 {
 	struct s3c24xx_gpio_chip *ourchip = to_s3c_chip(chip);
 	void __iomem *base = ourchip->base;
@@ -104,7 +105,7 @@ void s3c24xx_gpiolib_set(struct gpio_chip *chip, unsigned offset, int value)
 	local_irq_restore(flags);
 }
 
-int s3c24xx_gpiolib_get(struct gpio_chip *chip, unsigned offset)
+static int s3c24xx_gpiolib_get(struct gpio_chip *chip, unsigned offset)
 {
 	struct s3c24xx_gpio_chip *ourchip = to_s3c_chip(chip);
 	unsigned long val;
@@ -150,8 +151,7 @@ static int s3c24xx_gpiolib_banka_output(struct gpio_chip *chip,
 	return 0;
 }
 
-
-struct s3c24xx_gpio_chip gpios[] = {
+static struct s3c24xx_gpio_chip gpios[] = {
 	[0] = {
 		.base	= S3C24XX_GPIO_BASE(S3C2410_GPA0),
 		.chip	= {
diff --git a/arch/arm/plat-s3c24xx/irq.c b/arch/arm/plat-s3c24xx/irq.c
index ae2c5d7efc9d..36cefe176835 100644
--- a/arch/arm/plat-s3c24xx/irq.c
+++ b/arch/arm/plat-s3c24xx/irq.c
@@ -56,14 +56,14 @@
 #include <linux/ioport.h>
 #include <linux/sysdev.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/irq.h>
 #include <asm/io.h>
 
 #include <asm/mach/irq.h>
 
-#include <asm/arch/regs-irq.h>
-#include <asm/arch/regs-gpio.h>
+#include <mach/regs-irq.h>
+#include <mach/regs-gpio.h>
 
 #include <asm/plat-s3c24xx/cpu.h>
 #include <asm/plat-s3c24xx/pm.h>
@@ -292,27 +292,27 @@ s3c_irqext_type(unsigned int irq, unsigned int type)
 	/* Set the external interrupt to pointed trigger type */
 	switch (type)
 	{
-		case IRQT_NOEDGE:
+		case IRQ_TYPE_NONE:
 			printk(KERN_WARNING "No edge setting!\n");
 			break;
 
-		case IRQT_RISING:
+		case IRQ_TYPE_EDGE_RISING:
 			newvalue = S3C2410_EXTINT_RISEEDGE;
 			break;
 
-		case IRQT_FALLING:
+		case IRQ_TYPE_EDGE_FALLING:
 			newvalue = S3C2410_EXTINT_FALLEDGE;
 			break;
 
-		case IRQT_BOTHEDGE:
+		case IRQ_TYPE_EDGE_BOTH:
 			newvalue = S3C2410_EXTINT_BOTHEDGE;
 			break;
 
-		case IRQT_LOW:
+		case IRQ_TYPE_LEVEL_LOW:
 			newvalue = S3C2410_EXTINT_LOWLEV;
 			break;
 
-		case IRQT_HIGH:
+		case IRQ_TYPE_LEVEL_HIGH:
 			newvalue = S3C2410_EXTINT_HILEV;
 			break;
 
diff --git a/arch/arm/plat-s3c24xx/pm-simtec.c b/arch/arm/plat-s3c24xx/pm-simtec.c
index cb0b3a4ccf1b..e6705014b2a0 100644
--- a/arch/arm/plat-s3c24xx/pm-simtec.c
+++ b/arch/arm/plat-s3c24xx/pm-simtec.c
@@ -24,12 +24,12 @@
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 
-#include <asm/arch/map.h>
-#include <asm/arch/regs-gpio.h>
-#include <asm/arch/regs-mem.h>
+#include <mach/map.h>
+#include <mach/regs-gpio.h>
+#include <mach/regs-mem.h>
 
 #include <asm/mach-types.h>
 
diff --git a/arch/arm/plat-s3c24xx/pm.c b/arch/arm/plat-s3c24xx/pm.c
index bf5581a9aeea..fc4b731a949c 100644
--- a/arch/arm/plat-s3c24xx/pm.c
+++ b/arch/arm/plat-s3c24xx/pm.c
@@ -37,14 +37,14 @@
 #include <linux/serial_core.h>
 
 #include <asm/cacheflush.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 
 #include <asm/plat-s3c/regs-serial.h>
-#include <asm/arch/regs-clock.h>
-#include <asm/arch/regs-gpio.h>
-#include <asm/arch/regs-mem.h>
-#include <asm/arch/regs-irq.h>
+#include <mach/regs-clock.h>
+#include <mach/regs-gpio.h>
+#include <mach/regs-mem.h>
+#include <mach/regs-irq.h>
 
 #include <asm/mach/time.h>
 
diff --git a/arch/arm/plat-s3c24xx/pwm-clock.c b/arch/arm/plat-s3c24xx/pwm-clock.c
index 2cda3e3c6786..306cc9c6f9ef 100644
--- a/arch/arm/plat-s3c24xx/pwm-clock.c
+++ b/arch/arm/plat-s3c24xx/pwm-clock.c
@@ -18,11 +18,11 @@
 #include <linux/err.h>
 #include <linux/io.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/irq.h>
 
-#include <asm/arch/regs-clock.h>
-#include <asm/arch/regs-gpio.h>
+#include <mach/regs-clock.h>
+#include <mach/regs-gpio.h>
 
 #include <asm/plat-s3c24xx/clock.h>
 #include <asm/plat-s3c24xx/cpu.h>
@@ -89,7 +89,7 @@ static unsigned long clk_pwm_scaler_getrate(struct clk *clk)
 
 /* TODO - add set rate calls. */
 
-struct clk clk_timer_scaler[] = {
+static struct clk clk_timer_scaler[] = {
 	[0]	= {
 		.name		= "pwm-scaler0",
 		.id		= -1,
@@ -102,7 +102,7 @@ struct clk clk_timer_scaler[] = {
 	},
 };
 
-struct clk clk_timer_tclk[] = {
+static struct clk clk_timer_tclk[] = {
 	[0]	= {
 		.name		= "pwm-tclk0",
 		.id		= -1,
@@ -232,7 +232,7 @@ static int clk_pwm_tdiv_set_rate(struct clk *clk, unsigned long rate)
 	return 0;
 }
 
-struct pwm_tdiv_clk clk_timer_tdiv[] = {
+static struct pwm_tdiv_clk clk_timer_tdiv[] = {
 	[0]	= {
 		.clk	= {
 			.name		= "pwm-tdiv",
diff --git a/arch/arm/plat-s3c24xx/pwm.c b/arch/arm/plat-s3c24xx/pwm.c
index 18c4bdc49a05..7a92c938542a 100644
--- a/arch/arm/plat-s3c24xx/pwm.c
+++ b/arch/arm/plat-s3c24xx/pwm.c
@@ -19,6 +19,7 @@
 #include <linux/io.h>
 #include <linux/pwm.h>
 
+#include <asm/plat-s3c24xx/devs.h>
 #include <asm/plat-s3c/regs-timer.h>
 
 struct pwm_device {
@@ -38,7 +39,7 @@ struct pwm_device {
 	unsigned char		 pwm_id;
 };
 
-#define pwm_dbg(_pwm, msg...) dev_info(&(_pwm)->pdev->dev, msg)
+#define pwm_dbg(_pwm, msg...) dev_dbg(&(_pwm)->pdev->dev, msg)
 
 static struct clk *clk_scaler[2];
 
@@ -168,7 +169,7 @@ void pwm_disable(struct pwm_device *pwm)
 
 EXPORT_SYMBOL(pwm_disable);
 
-unsigned long pwm_calc_tin(struct pwm_device *pwm, unsigned long freq)
+static unsigned long pwm_calc_tin(struct pwm_device *pwm, unsigned long freq)
 {
 	unsigned long tin_parent_rate;
 	unsigned int div;
diff --git a/arch/arm/plat-s3c24xx/s3c244x-clock.c b/arch/arm/plat-s3c24xx/s3c244x-clock.c
index faf3e0f9f4e2..8a5fffde6631 100644
--- a/arch/arm/plat-s3c24xx/s3c244x-clock.c
+++ b/arch/arm/plat-s3c24xx/s3c244x-clock.c
@@ -34,12 +34,12 @@
 #include <linux/mutex.h>
 #include <linux/clk.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/atomic.h>
 #include <asm/irq.h>
 #include <asm/io.h>
 
-#include <asm/arch/regs-clock.h>
+#include <mach/regs-clock.h>
 
 #include <asm/plat-s3c24xx/clock.h>
 #include <asm/plat-s3c24xx/cpu.h>
diff --git a/arch/arm/plat-s3c24xx/s3c244x-irq.c b/arch/arm/plat-s3c24xx/s3c244x-irq.c
index 2dbb2606d448..f3dc38cf1de4 100644
--- a/arch/arm/plat-s3c24xx/s3c244x-irq.c
+++ b/arch/arm/plat-s3c24xx/s3c244x-irq.c
@@ -25,14 +25,14 @@
 #include <linux/ioport.h>
 #include <linux/sysdev.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/irq.h>
 #include <asm/io.h>
 
 #include <asm/mach/irq.h>
 
-#include <asm/arch/regs-irq.h>
-#include <asm/arch/regs-gpio.h>
+#include <mach/regs-irq.h>
+#include <mach/regs-gpio.h>
 
 #include <asm/plat-s3c24xx/cpu.h>
 #include <asm/plat-s3c24xx/pm.h>
diff --git a/arch/arm/plat-s3c24xx/s3c244x.c b/arch/arm/plat-s3c24xx/s3c244x.c
index 2f01af5f64c4..281b4804ed38 100644
--- a/arch/arm/plat-s3c24xx/s3c244x.c
+++ b/arch/arm/plat-s3c24xx/s3c244x.c
@@ -25,15 +25,15 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 #include <asm/irq.h>
 
-#include <asm/arch/regs-clock.h>
+#include <mach/regs-clock.h>
 #include <asm/plat-s3c/regs-serial.h>
-#include <asm/arch/regs-gpio.h>
-#include <asm/arch/regs-gpioj.h>
-#include <asm/arch/regs-dsc.h>
+#include <mach/regs-gpio.h>
+#include <mach/regs-gpioj.h>
+#include <mach/regs-dsc.h>
 
 #include <asm/plat-s3c24xx/s3c2410.h>
 #include <asm/plat-s3c24xx/s3c2440.h>
diff --git a/arch/arm/plat-s3c24xx/sleep.S b/arch/arm/plat-s3c24xx/sleep.S
index a646cbe8244c..4981a08b6ebb 100644
--- a/arch/arm/plat-s3c24xx/sleep.S
+++ b/arch/arm/plat-s3c24xx/sleep.S
@@ -26,12 +26,12 @@
 
 #include <linux/linkage.h>
 #include <asm/assembler.h>
-#include <asm/hardware.h>
-#include <asm/arch/map.h>
+#include <mach/hardware.h>
+#include <mach/map.h>
 
-#include <asm/arch/regs-gpio.h>
-#include <asm/arch/regs-clock.h>
-#include <asm/arch/regs-mem.h>
+#include <mach/regs-gpio.h>
+#include <mach/regs-clock.h>
+#include <mach/regs-mem.h>
 #include <asm/plat-s3c/regs-serial.h>
 
 /* CONFIG_DEBUG_RESUME is dangerous if your bootloader does not
diff --git a/arch/arm/plat-s3c24xx/time.c b/arch/arm/plat-s3c24xx/time.c
index 766473b3f98b..b471a21ae2e4 100644
--- a/arch/arm/plat-s3c24xx/time.c
+++ b/arch/arm/plat-s3c24xx/time.c
@@ -32,9 +32,9 @@
 
 #include <asm/io.h>
 #include <asm/irq.h>
-#include <asm/arch/map.h>
+#include <mach/map.h>
 #include <asm/plat-s3c/regs-timer.h>
-#include <asm/arch/regs-irq.h>
+#include <mach/regs-irq.h>
 #include <asm/mach/time.h>
 
 #include <asm/plat-s3c24xx/clock.h>
diff --git a/arch/arm/tools/Makefile b/arch/arm/tools/Makefile
index c2a4993a724c..1dbaa29ac4d7 100644
--- a/arch/arm/tools/Makefile
+++ b/arch/arm/tools/Makefile
@@ -6,4 +6,5 @@
 
 include/asm-arm/mach-types.h: $(src)/gen-mach-types $(src)/mach-types
 	@echo '  Generating $@'
+	@mkdir -p $(dir $@)
 	$(Q)$(AWK) -f $^ > $@ || { rm -f $@; /bin/false; }
diff --git a/arch/arm/tools/mach-types b/arch/arm/tools/mach-types
index 8b8f564c3aa2..56281c030a7b 100644
--- a/arch/arm/tools/mach-types
+++ b/arch/arm/tools/mach-types
@@ -12,7 +12,7 @@
 #
 #   http://www.arm.linux.org.uk/developer/machines/?action=new
 #
-# Last update: Sun Jul 13 12:04:05 2008
+# Last update: Wed Aug 13 21:56:02 2008
 #
 # machine_is_xxx	CONFIG_xxxx		MACH_TYPE_xxx		number
 #
@@ -843,7 +843,7 @@ borzoi			MACH_BORZOI		BORZOI			831
 gecko			MACH_GECKO		GECKO			832
 ds101			MACH_DS101		DS101			833
 omap_palmtt2		MACH_OMAP_PALMTT2	OMAP_PALMTT2		834
-xscale_palmld		MACH_XSCALE_PALMLD	XSCALE_PALMLD		835
+palmld			MACH_PALMLD		PALMLD			835
 cc9c			MACH_CC9C		CC9C			836
 sbc1670			MACH_SBC1670		SBC1670			837
 ixdp28x5		MACH_IXDP28X5		IXDP28X5		838
@@ -852,7 +852,7 @@ ml696k			MACH_ML696K		ML696K			840
 arcom_zeus		MACH_ARCOM_ZEUS		ARCOM_ZEUS		841
 osiris			MACH_OSIRIS		OSIRIS			842
 maestro			MACH_MAESTRO		MAESTRO			843
-tunge2			MACH_TUNGE2		TUNGE2			844
+palmte2			MACH_PALMTE2		PALMTE2			844
 ixbbm			MACH_IXBBM		IXBBM			845
 mx27ads			MACH_MX27ADS		MX27ADS			846
 ax8004			MACH_AX8004		AX8004			847
@@ -916,7 +916,7 @@ nxdb500			MACH_NXDB500		NXDB500			905
 apf9328			MACH_APF9328		APF9328			906
 omap_wipoq		MACH_OMAP_WIPOQ		OMAP_WIPOQ		907
 omap_twip		MACH_OMAP_TWIP		OMAP_TWIP		908
-palmtreo650		MACH_PALMTREO650	PALMTREO650		909
+palmt650		MACH_PALMT650		PALMT650		909
 acumen			MACH_ACUMEN		ACUMEN			910
 xp100			MACH_XP100		XP100			911
 fs2410			MACH_FS2410		FS2410			912
@@ -1096,7 +1096,7 @@ atc6			MACH_ATC6		ATC6			1086
 multmdw			MACH_MULTMDW		MULTMDW			1087
 mba2440			MACH_MBA2440		MBA2440			1088
 ecsd			MACH_ECSD		ECSD			1089
-zire31			MACH_ZIRE31		ZIRE31			1090
+palmz31			MACH_PALMZ31		PALMZ31			1090
 fsg			MACH_FSG		FSG			1091
 razor101		MACH_RAZOR101		RAZOR101		1092
 opera_tdm		MACH_OPERA_TDM		OPERA_TDM		1093
@@ -1810,7 +1810,7 @@ kriss_sensor		MACH_KRISS_SENSOR	KRISS_SENSOR		1819
 pilz_pmi5		MACH_PILZ_PMI5		PILZ_PMI5		1820
 jade			MACH_JADE		JADE			1821
 ks8695_softplc		MACH_KS8695_SOFTPLC	KS8695_SOFTPLC		1822
-gprisc4			MACH_GPRISC4		GPRISC4			1823
+gprisc3			MACH_GPRISC4		GPRISC4			1823
 stamp9260		MACH_STAMP9260		STAMP9260		1824
 smdk6430		MACH_SMDK6430		SMDK6430		1825
 smdkc100		MACH_SMDKC100		SMDKC100		1826
@@ -1820,3 +1820,44 @@ deister_eyecam		MACH_DEISTER_EYECAM	DEISTER_EYECAM		1829
 at91sam9m10ek		MACH_AT91SAM9M10EK	AT91SAM9M10EK		1830
 linkstation_produo	MACH_LINKSTATION_PRODUO	LINKSTATION_PRODUO	1831
 hit_b0			MACH_HIT_B0		HIT_B0			1832
+adx_rmu			MACH_ADX_RMU		ADX_RMU			1833
+xg_cpe_main		MACH_XG_CPE_MAIN	XG_CPE_MAIN		1834
+edb9407a		MACH_EDB9407A		EDB9407A		1835
+dtb9608			MACH_DTB9608		DTB9608			1836
+em104v1			MACH_EM104V1		EM104V1			1837
+demo			MACH_DEMO		DEMO			1838
+logi9260		MACH_LOGI9260		LOGI9260		1839
+mx31_exm32		MACH_MX31_EXM32		MX31_EXM32		1840
+usb_a9g20		MACH_USB_A9G20		USB_A9G20		1841
+picproje2008		MACH_PICPROJE2008	PICPROJE2008		1842
+cs_e9315		MACH_CS_E9315		CS_E9315		1843
+qil_a9g20		MACH_QIL_A9G20		QIL_A9G20		1844
+sha_pon020		MACH_SHA_PON020		SHA_PON020		1845
+nad			MACH_NAD		NAD			1846
+sbc35_a9260		MACH_SBC35_A9260	SBC35_A9260		1847
+sbc35_a9g20		MACH_SBC35_A9G20	SBC35_A9G20		1848
+davinci_beginning	MACH_DAVINCI_BEGINNING	DAVINCI_BEGINNING	1849
+uwc			MACH_UWC		UWC			1850
+mxlads			MACH_MXLADS		MXLADS			1851
+htcnike			MACH_HTCNIKE		HTCNIKE			1852
+deister_pxa270		MACH_DEISTER_PXA270	DEISTER_PXA270		1853
+cme9210js		MACH_CME9210JS		CME9210JS		1854
+cc9p9360		MACH_CC9P9360		CC9P9360		1855
+mocha			MACH_MOCHA		MOCHA			1856
+wapd170ag		MACH_WAPD170AG		WAPD170AG		1857
+linkstation_mini	MACH_LINKSTATION_MINI	LINKSTATION_MINI	1858
+afeb9260		MACH_AFEB9260		AFEB9260		1859
+w90x900			MACH_W90X900		W90X900			1860
+w90x700			MACH_W90X700		W90X700			1861
+kt300ip			MACH_KT300IP		KT300IP			1862
+kt300ip_g20		MACH_KT300IP_G20	KT300IP_G20		1863
+srcm			MACH_SRCM		SRCM			1864
+wlnx_9260		MACH_WLNX_9260		WLNX_9260		1865
+openmoko_gta03		MACH_OPENMOKO_GTA03	OPENMOKO_GTA03		1866
+osprey2			MACH_OSPREY2		OSPREY2			1867
+kbio9260		MACH_KBIO9260		KBIO9260		1868
+ginza			MACH_GINZA		GINZA			1869
+a636n			MACH_A636N		A636N			1870
+imx27ipcam		MACH_IMX27IPCAM		IMX27IPCAM		1871
+nenoc			MACH_NEMOC		NEMOC			1872
+geneva			MACH_GENEVA		GENEVA			1873
diff --git a/arch/avr32/Kconfig b/arch/avr32/Kconfig
index df4adefedb42..7c239a916275 100644
--- a/arch/avr32/Kconfig
+++ b/arch/avr32/Kconfig
@@ -88,7 +88,7 @@ config PLATFORM_AT32AP
 	select SUBARCH_AVR32B
 	select MMU
 	select PERFORMANCE_COUNTERS
-	select HAVE_GPIO_LIB
+	select ARCH_REQUIRE_GPIOLIB
 	select GENERIC_ALLOCATOR
 
 #
diff --git a/arch/avr32/Makefile b/arch/avr32/Makefile
index 17a3529341dd..c9e1f0b47fd3 100644
--- a/arch/avr32/Makefile
+++ b/arch/avr32/Makefile
@@ -23,9 +23,14 @@ KBUILD_AFLAGS	+= $(cpuflags-y)
 
 CHECKFLAGS	+= -D__avr32__ -D__BIG_ENDIAN
 
+machine-$(CONFIG_PLATFORM_AT32AP) := at32ap
+machdirs	:= $(patsubst %,arch/avr32/mach-%/, $(machine-y))
+
+KBUILD_CPPFLAGS	+= $(patsubst %,-I$(srctree)/%include,$(machdirs))
+
 head-$(CONFIG_LOADER_U_BOOT)		+= arch/avr32/boot/u-boot/head.o
 head-y					+= arch/avr32/kernel/head.o
-core-$(CONFIG_PLATFORM_AT32AP)		+= arch/avr32/mach-at32ap/
+core-y					+= $(machdirs)
 core-$(CONFIG_BOARD_ATSTK1000)		+= arch/avr32/boards/atstk1000/
 core-$(CONFIG_BOARD_ATNGW100)		+= arch/avr32/boards/atngw100/
 core-$(CONFIG_LOADER_U_BOOT)		+= arch/avr32/boot/u-boot/
@@ -34,20 +39,6 @@ core-y					+= arch/avr32/mm/
 drivers-$(CONFIG_OPROFILE)		+= arch/avr32/oprofile/
 libs-y					+= arch/avr32/lib/
 
-archincdir-$(CONFIG_PLATFORM_AT32AP)	:= arch-at32ap
-
-include/asm-avr32/.arch: $(wildcard include/config/platform/*.h) include/config/auto.conf
-	@echo '  SYMLINK include/asm-avr32/arch -> include/asm-avr32/$(archincdir-y)'
-ifneq ($(KBUILD_SRC),)
-	$(Q)mkdir -p include/asm-avr32
-	$(Q)ln -fsn $(srctree)/include/asm-avr32/$(archincdir-y) include/asm-avr32/arch
-else
-	$(Q)ln -fsn $(archincdir-y) include/asm-avr32/arch
-endif
-	@touch $@
-
-archprepare: include/asm-avr32/.arch
-
 CLEAN_FILES += include/asm-avr32/.arch include/asm-avr32/arch
 
 BOOT_TARGETS := vmlinux.elf vmlinux.bin uImage uImage.srec
diff --git a/arch/avr32/boards/atngw100/flash.c b/arch/avr32/boards/atngw100/flash.c
index b07ae63aa548..55ccc9ce4892 100644
--- a/arch/avr32/boards/atngw100/flash.c
+++ b/arch/avr32/boards/atngw100/flash.c
@@ -13,7 +13,7 @@
 #include <linux/mtd/partitions.h>
 #include <linux/mtd/physmap.h>
 
-#include <asm/arch/smc.h>
+#include <mach/smc.h>
 
 static struct smc_timing flash_timing __initdata = {
 	.ncs_read_setup		= 0,
diff --git a/arch/avr32/boards/atngw100/setup.c b/arch/avr32/boards/atngw100/setup.c
index c7fe94d03a1e..b8286f1ce854 100644
--- a/arch/avr32/boards/atngw100/setup.c
+++ b/arch/avr32/boards/atngw100/setup.c
@@ -23,10 +23,10 @@
 #include <asm/io.h>
 #include <asm/setup.h>
 
-#include <asm/arch/at32ap700x.h>
-#include <asm/arch/board.h>
-#include <asm/arch/init.h>
-#include <asm/arch/portmux.h>
+#include <mach/at32ap700x.h>
+#include <mach/board.h>
+#include <mach/init.h>
+#include <mach/portmux.h>
 
 /* Oscillator frequencies. These are board-specific */
 unsigned long at32_board_osc_rates[3] = {
@@ -47,7 +47,7 @@ static struct eth_platform_data __initdata eth_data[2];
 static struct spi_board_info spi0_board_info[] __initdata = {
 	{
 		.modalias	= "mtd_dataflash",
-		.max_speed_hz	= 10000000,
+		.max_speed_hz	= 8000000,
 		.chip_select	= 0,
 	},
 };
diff --git a/arch/avr32/boards/atstk1000/Kconfig b/arch/avr32/boards/atstk1000/Kconfig
index af90b00100fd..8dc48214f0b7 100644
--- a/arch/avr32/boards/atstk1000/Kconfig
+++ b/arch/avr32/boards/atstk1000/Kconfig
@@ -18,6 +18,10 @@ config BOARD_ATSTK1004
 	bool "ATSTK1004"
 	select CPU_AT32AP7002
 
+config BOARD_ATSTK1006
+	bool "ATSTK1006"
+	select CPU_AT32AP7000
+
 endchoice
 
 
diff --git a/arch/avr32/boards/atstk1000/Makefile b/arch/avr32/boards/atstk1000/Makefile
index beead86462e8..edecee03742d 100644
--- a/arch/avr32/boards/atstk1000/Makefile
+++ b/arch/avr32/boards/atstk1000/Makefile
@@ -2,3 +2,4 @@ obj-y				+= setup.o flash.o
 obj-$(CONFIG_BOARD_ATSTK1002)	+= atstk1002.o
 obj-$(CONFIG_BOARD_ATSTK1003)	+= atstk1003.o
 obj-$(CONFIG_BOARD_ATSTK1004)	+= atstk1004.o
+obj-$(CONFIG_BOARD_ATSTK1006)	+= atstk1002.o
diff --git a/arch/avr32/boards/atstk1000/atstk1002.c b/arch/avr32/boards/atstk1000/atstk1002.c
index e11659b732fa..ee4c292683e1 100644
--- a/arch/avr32/boards/atstk1000/atstk1002.c
+++ b/arch/avr32/boards/atstk1000/atstk1002.c
@@ -1,7 +1,7 @@
 /*
- * ATSTK1002 daughterboard-specific init code
+ * ATSTK1002/ATSTK1006 daughterboard-specific init code
  *
- * Copyright (C) 2005-2006 Atmel Corporation
+ * Copyright (C) 2005-2007 Atmel Corporation
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
@@ -21,10 +21,12 @@
 
 #include <asm/io.h>
 #include <asm/setup.h>
-#include <asm/arch/at32ap700x.h>
-#include <asm/arch/board.h>
-#include <asm/arch/init.h>
-#include <asm/arch/portmux.h>
+#include <asm/atmel-mci.h>
+
+#include <mach/at32ap700x.h>
+#include <mach/board.h>
+#include <mach/init.h>
+#include <mach/portmux.h>
 
 #include "atstk1000.h"
 
@@ -35,6 +37,74 @@ unsigned long at32_board_osc_rates[3] = {
 	[2] = 12000000,	/* 12 MHz on osc1 */
 };
 
+/*
+ * The ATSTK1006 daughterboard is very similar to the ATSTK1002. Both
+ * have the AT32AP7000 chip on board; the difference is that the
+ * STK1006 has 128 MB SDRAM (the STK1002 uses the 8 MB SDRAM chip on
+ * the STK1000 motherboard) and 256 MB NAND flash (the STK1002 has
+ * none.)
+ *
+ * The RAM difference is handled by the boot loader, so the only
+ * difference we end up handling here is the NAND flash.
+ */
+#ifdef CONFIG_BOARD_ATSTK1006
+#include <linux/mtd/partitions.h>
+#include <mach/smc.h>
+
+static struct smc_timing nand_timing __initdata = {
+	.ncs_read_setup		= 0,
+	.nrd_setup		= 10,
+	.ncs_write_setup	= 0,
+	.nwe_setup		= 10,
+
+	.ncs_read_pulse		= 30,
+	.nrd_pulse		= 15,
+	.ncs_write_pulse	= 30,
+	.nwe_pulse		= 15,
+
+	.read_cycle		= 30,
+	.write_cycle		= 30,
+
+	.ncs_read_recover	= 0,
+	.nrd_recover		= 15,
+	.ncs_write_recover	= 0,
+	/* WE# high -> RE# low min 60 ns */
+	.nwe_recover		= 50,
+};
+
+static struct smc_config nand_config __initdata = {
+	.bus_width		= 1,
+	.nrd_controlled		= 1,
+	.nwe_controlled		= 1,
+	.nwait_mode		= 0,
+	.byte_write		= 0,
+	.tdf_cycles		= 2,
+	.tdf_mode		= 0,
+};
+
+static struct mtd_partition nand_partitions[] = {
+	{
+		.name		= "main",
+		.offset		= 0x00000000,
+		.size		= MTDPART_SIZ_FULL,
+	},
+};
+
+static struct mtd_partition *nand_part_info(int size, int *num_partitions)
+{
+	*num_partitions = ARRAY_SIZE(nand_partitions);
+	return nand_partitions;
+}
+
+static struct atmel_nand_data atstk1006_nand_data __initdata = {
+	.cle		= 21,
+	.ale		= 22,
+	.rdy_pin	= GPIO_PIN_PB(30),
+	.enable_pin	= GPIO_PIN_PB(29),
+	.partition_info	= nand_part_info,
+};
+#endif
+
 struct eth_addr {
 	u8 addr[6];
 };
@@ -192,6 +262,21 @@ void __init setup_board(void)
 	at32_setup_serial_console(0);
 }
 
+#ifndef CONFIG_BOARD_ATSTK100X_SW2_CUSTOM
+
+/* MMC card detect requires MACB0 *NOT* be used */
+#ifdef CONFIG_BOARD_ATSTK1002_SW6_CUSTOM
+static struct mci_platform_data __initdata mci0_data = {
+	.detect_pin	= GPIO_PIN_PC(14),	/* gpio30/sdcd */
+	.wp_pin		= GPIO_PIN_PC(15),	/* gpio31/sdwp */
+};
+#define MCI_PDATA	&mci0_data
+#else
+#define MCI_PDATA	NULL
+#endif	/* SW6 for sd{cd,wp} routing */
+
+#endif	/* SW2 for MMC signal routing */
+
 static int __init atstk1002_init(void)
 {
 	/*
@@ -218,6 +303,12 @@ static int __init atstk1002_init(void)
 
 	at32_add_system_devices();
 
+#ifdef CONFIG_BOARD_ATSTK1006
+	smc_set_timing(&nand_config, &nand_timing);
+	smc_set_configuration(3, &nand_config);
+	at32_add_device_nand(0, &atstk1006_nand_data);
+#endif
+
 #ifdef	CONFIG_BOARD_ATSTK100X_SW2_CUSTOM
 	at32_add_device_usart(1);
 #else
@@ -235,7 +326,7 @@ static int __init atstk1002_init(void)
 	at32_add_device_spi(1, spi1_board_info, ARRAY_SIZE(spi1_board_info));
 #endif
 #ifndef CONFIG_BOARD_ATSTK1002_SW2_CUSTOM
-	at32_add_device_mci(0, NULL);
+	at32_add_device_mci(0, MCI_PDATA);
 #endif
 #ifdef CONFIG_BOARD_ATSTK1002_SW5_CUSTOM
 	set_hw_addr(at32_add_device_eth(1, &eth_data[1]));
diff --git a/arch/avr32/boards/atstk1000/atstk1003.c b/arch/avr32/boards/atstk1000/atstk1003.c
index ea109f435a83..0cf664174c17 100644
--- a/arch/avr32/boards/atstk1000/atstk1003.c
+++ b/arch/avr32/boards/atstk1000/atstk1003.c
@@ -20,10 +20,10 @@
 
 #include <asm/setup.h>
 
-#include <asm/arch/at32ap700x.h>
-#include <asm/arch/board.h>
-#include <asm/arch/init.h>
-#include <asm/arch/portmux.h>
+#include <mach/at32ap700x.h>
+#include <mach/board.h>
+#include <mach/init.h>
+#include <mach/portmux.h>
 
 #include "atstk1000.h"
 
@@ -154,7 +154,7 @@ static int __init atstk1003_init(void)
 	at32_add_device_spi(1, spi1_board_info, ARRAY_SIZE(spi1_board_info));
 #endif
 #ifndef CONFIG_BOARD_ATSTK100X_SW2_CUSTOM
-	at32_add_device_mci(0);
+	at32_add_device_mci(0, NULL);
 #endif
 	at32_add_device_usba(0, NULL);
 #ifndef CONFIG_BOARD_ATSTK100X_SW3_CUSTOM
diff --git a/arch/avr32/boards/atstk1000/atstk1004.c b/arch/avr32/boards/atstk1000/atstk1004.c
index c7236df74d74..50a5273e5916 100644
--- a/arch/avr32/boards/atstk1000/atstk1004.c
+++ b/arch/avr32/boards/atstk1000/atstk1004.c
@@ -22,10 +22,10 @@
 
 #include <asm/setup.h>
 
-#include <asm/arch/at32ap700x.h>
-#include <asm/arch/board.h>
-#include <asm/arch/init.h>
-#include <asm/arch/portmux.h>
+#include <mach/at32ap700x.h>
+#include <mach/board.h>
+#include <mach/init.h>
+#include <mach/portmux.h>
 
 #include "atstk1000.h"
 
@@ -137,7 +137,7 @@ static int __init atstk1004_init(void)
 	at32_add_device_spi(1, spi1_board_info, ARRAY_SIZE(spi1_board_info));
 #endif
 #ifndef CONFIG_BOARD_ATSTK100X_SW2_CUSTOM
-	at32_add_device_mci(0);
+	at32_add_device_mci(0, NULL);
 #endif
 	at32_add_device_lcdc(0, &atstk1000_lcdc_data,
 			     fbmem_start, fbmem_size, 0);
diff --git a/arch/avr32/boards/atstk1000/flash.c b/arch/avr32/boards/atstk1000/flash.c
index 3d0a102ad45e..6e4d561977ff 100644
--- a/arch/avr32/boards/atstk1000/flash.c
+++ b/arch/avr32/boards/atstk1000/flash.c
@@ -13,7 +13,7 @@
 #include <linux/mtd/partitions.h>
 #include <linux/mtd/physmap.h>
 
-#include <asm/arch/smc.h>
+#include <mach/smc.h>
 
 static struct smc_timing flash_timing __initdata = {
 	.ncs_read_setup		= 0,
diff --git a/arch/avr32/boards/atstk1000/setup.c b/arch/avr32/boards/atstk1000/setup.c
index 8bedf93876a3..2d6b560115d9 100644
--- a/arch/avr32/boards/atstk1000/setup.c
+++ b/arch/avr32/boards/atstk1000/setup.c
@@ -18,9 +18,9 @@
 
 #include <asm/setup.h>
 
-#include <asm/arch/at32ap700x.h>
-#include <asm/arch/board.h>
-#include <asm/arch/portmux.h>
+#include <mach/at32ap700x.h>
+#include <mach/board.h>
+#include <mach/portmux.h>
 
 #include "atstk1000.h"
 
diff --git a/arch/avr32/configs/atngw100_defconfig b/arch/avr32/configs/atngw100_defconfig
index 119edb839ac3..541520912c55 100644
--- a/arch/avr32/configs/atngw100_defconfig
+++ b/arch/avr32/configs/atngw100_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc3
-# Mon May 26 13:30:59 2008
+# Linux kernel version: 2.6.27-rc1
+# Tue Aug  5 16:00:47 2008
 #
 CONFIG_AVR32=y
 CONFIG_GENERIC_GPIO=y
@@ -78,10 +78,16 @@ CONFIG_PROFILING=y
 CONFIG_OPROFILE=m
 CONFIG_HAVE_OPROFILE=y
 CONFIG_KPROBES=y
+# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
+# CONFIG_HAVE_IOREMAP_PROT is not set
 CONFIG_HAVE_KPROBES=y
 # CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_ARCH_TRACEHOOK is not set
 # CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+CONFIG_HAVE_CLK=y
 CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
@@ -98,6 +104,7 @@ CONFIG_BLOCK=y
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -142,6 +149,7 @@ CONFIG_PHYS_OFFSET=0x10000000
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
+CONFIG_QUICKLIST=y
 # CONFIG_HAVE_ARCH_BOOTMEM_NODE is not set
 # CONFIG_ARCH_HAVE_MEMORY_PRESENT is not set
 # CONFIG_NEED_NODE_MEMMAP_SIZE is not set
@@ -160,6 +168,7 @@ CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_RESOURCES_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
+CONFIG_NR_QUICK=2
 CONFIG_VIRT_TO_BUS=y
 # CONFIG_OWNERSHIP_TRACE is not set
 CONFIG_NMI_DEBUGGING=y
@@ -174,6 +183,12 @@ CONFIG_CMDLINE=""
 #
 # Power management options
 #
+CONFIG_PM=y
+# CONFIG_PM_DEBUG is not set
+CONFIG_PM_SLEEP=y
+CONFIG_SUSPEND=y
+CONFIG_SUSPEND_FREEZER=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
 
 #
 # CPU Frequency scaling
@@ -205,10 +220,6 @@ CONFIG_CPU_FREQ_AT32AP=y
 #
 CONFIG_BINFMT_ELF=y
 # CONFIG_BINFMT_MISC is not set
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -222,6 +233,7 @@ CONFIG_XFRM_USER=y
 # CONFIG_XFRM_SUB_POLICY is not set
 # CONFIG_XFRM_MIGRATE is not set
 # CONFIG_XFRM_STATISTICS is not set
+CONFIG_XFRM_IPCOMP=y
 CONFIG_NET_KEY=y
 # CONFIG_NET_KEY_MIGRATE is not set
 CONFIG_INET=y
@@ -339,8 +351,10 @@ CONFIG_IP6_NF_MANGLE=m
 # CONFIG_IP_SCTP is not set
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
+CONFIG_STP=m
 CONFIG_BRIDGE=m
 CONFIG_VLAN_8021Q=m
+# CONFIG_VLAN_8021Q_GVRP is not set
 # CONFIG_DECNET is not set
 CONFIG_LLC=m
 # CONFIG_LLC2 is not set
@@ -499,7 +513,6 @@ CONFIG_ATMEL_TCB_CLKSRC_BLOCK=0
 # CONFIG_ATA is not set
 # CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -607,21 +620,35 @@ CONFIG_I2C_ALGOBIT=m
 #
 # I2C Hardware Bus support
 #
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
 CONFIG_I2C_GPIO=m
 # CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
 # CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
 # CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_STUB is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
 # CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
 
 #
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
+CONFIG_AT24=m
 # CONFIG_SENSORS_EEPROM is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_TPS65010 is not set
 # CONFIG_SENSORS_MAX6875 is not set
@@ -646,27 +673,32 @@ CONFIG_SPI_ATMEL=y
 # CONFIG_SPI_AT25 is not set
 CONFIG_SPI_SPIDEV=m
 # CONFIG_SPI_TLE62X0 is not set
-CONFIG_HAVE_GPIO_LIB=y
-
-#
-# GPIO Support
-#
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
 # CONFIG_DEBUG_GPIO is not set
+CONFIG_GPIO_SYSFS=y
 
 #
 # I2C GPIO expanders:
 #
+# CONFIG_GPIO_MAX732X is not set
 # CONFIG_GPIO_PCA953X is not set
 # CONFIG_GPIO_PCF857X is not set
 
 #
+# PCI GPIO expanders:
+#
+
+#
 # SPI GPIO expanders:
 #
+# CONFIG_GPIO_MAX7301 is not set
 # CONFIG_GPIO_MCP23S08 is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 # CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
 CONFIG_WATCHDOG=y
 # CONFIG_WATCHDOG_NOWAYOUT is not set
 
@@ -685,6 +717,7 @@ CONFIG_SSB_POSSIBLE=y
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
 
@@ -716,10 +749,6 @@ CONFIG_SSB_POSSIBLE=y
 # Display device support
 #
 # CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Sound
-#
 # CONFIG_SOUND is not set
 CONFIG_USB_SUPPORT=y
 # CONFIG_USB_ARCH_HAS_HCD is not set
@@ -740,7 +769,7 @@ CONFIG_USB_GADGET_ATMEL_USBA=y
 CONFIG_USB_ATMEL_USBA=y
 # CONFIG_USB_GADGET_FSL_USB2 is not set
 # CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_PXA2XX is not set
+# CONFIG_USB_GADGET_PXA25X is not set
 # CONFIG_USB_GADGET_M66592 is not set
 # CONFIG_USB_GADGET_PXA27X is not set
 # CONFIG_USB_GADGET_GOKU is not set
@@ -759,21 +788,24 @@ CONFIG_USB_FILE_STORAGE=m
 CONFIG_USB_G_SERIAL=m
 # CONFIG_USB_MIDI_GADGET is not set
 # CONFIG_USB_G_PRINTER is not set
-CONFIG_MMC=m
+CONFIG_USB_CDC_COMPOSITE=m
+CONFIG_MMC=y
 # CONFIG_MMC_DEBUG is not set
 # CONFIG_MMC_UNSAFE_RESUME is not set
 
 #
 # MMC/SD Card Drivers
 #
-CONFIG_MMC_BLOCK=m
+CONFIG_MMC_BLOCK=y
 CONFIG_MMC_BLOCK_BOUNCE=y
 # CONFIG_SDIO_UART is not set
-# CONFIG_MMC_TEST is not set
+CONFIG_MMC_TEST=m
 
 #
 # MMC/SD Host Controller Drivers
 #
+# CONFIG_MMC_SDHCI is not set
+CONFIG_MMC_ATMELMCI=y
 CONFIG_MMC_SPI=m
 # CONFIG_MEMSTICK is not set
 CONFIG_NEW_LEDS=y
@@ -783,6 +815,7 @@ CONFIG_LEDS_CLASS=y
 # LED drivers
 #
 CONFIG_LEDS_GPIO=y
+# CONFIG_LEDS_PCA955X is not set
 
 #
 # LED Triggers
@@ -821,10 +854,13 @@ CONFIG_RTC_INTF_DEV=y
 # CONFIG_RTC_DRV_PCF8583 is not set
 # CONFIG_RTC_DRV_M41T80 is not set
 # CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
 
 #
 # SPI RTC drivers
 #
+# CONFIG_RTC_DRV_M41T94 is not set
+# CONFIG_RTC_DRV_DS1305 is not set
 # CONFIG_RTC_DRV_MAX6902 is not set
 # CONFIG_RTC_DRV_R9701 is not set
 # CONFIG_RTC_DRV_RS5C348 is not set
@@ -844,6 +880,19 @@ CONFIG_RTC_INTF_DEV=y
 # on-CPU RTC drivers
 #
 CONFIG_RTC_DRV_AT32AP700X=y
+CONFIG_DMADEVICES=y
+
+#
+# DMA Devices
+#
+CONFIG_DW_DMAC=y
+CONFIG_DMA_ENGINE=y
+
+#
+# DMA Clients
+#
+# CONFIG_NET_DMA is not set
+CONFIG_DMATEST=m
 # CONFIG_UIO is not set
 
 #
@@ -921,6 +970,7 @@ CONFIG_JFFS2_RTIME=y
 # CONFIG_CRAMFS is not set
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
 # CONFIG_ROMFS_FS is not set
@@ -931,17 +981,16 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 # CONFIG_NFS_V4 is not set
+CONFIG_ROOT_NFS=y
 CONFIG_NFSD=m
 CONFIG_NFSD_V3=y
 # CONFIG_NFSD_V3_ACL is not set
 # CONFIG_NFSD_V4 is not set
-CONFIG_ROOT_NFS=y
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_EXPORTFS=m
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 CONFIG_SMB_FS=m
@@ -1017,6 +1066,8 @@ CONFIG_MAGIC_SYSRQ=y
 CONFIG_DEBUG_KERNEL=y
 # CONFIG_DEBUG_SHIRQ is not set
 CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
 CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
@@ -1037,6 +1088,7 @@ CONFIG_DEBUG_BUGVERBOSE=y
 # CONFIG_DEBUG_INFO is not set
 # CONFIG_DEBUG_VM is not set
 # CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 CONFIG_FRAME_POINTER=y
@@ -1101,6 +1153,10 @@ CONFIG_CRYPTO_HMAC=y
 # CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=y
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
 CONFIG_CRYPTO_SHA1=y
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
@@ -1141,12 +1197,14 @@ CONFIG_BITREVERSE=y
 # CONFIG_GENERIC_FIND_NEXT_BIT is not set
 CONFIG_CRC_CCITT=m
 # CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
 CONFIG_CRC_ITU_T=m
 CONFIG_CRC32=y
 CONFIG_CRC7=m
 # CONFIG_LIBCRC32C is not set
 CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=y
+CONFIG_GENERIC_ALLOCATOR=y
 CONFIG_PLIST=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
diff --git a/arch/avr32/configs/atstk1002_defconfig b/arch/avr32/configs/atstk1002_defconfig
index c6d02eac8791..69fce6b6a783 100644
--- a/arch/avr32/configs/atstk1002_defconfig
+++ b/arch/avr32/configs/atstk1002_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc3
-# Mon May 26 13:30:20 2008
+# Linux kernel version: 2.6.27-rc1
+# Mon Aug  4 16:02:27 2008
 #
 CONFIG_AVR32=y
 CONFIG_GENERIC_GPIO=y
@@ -77,10 +77,16 @@ CONFIG_PROFILING=y
 CONFIG_OPROFILE=m
 CONFIG_HAVE_OPROFILE=y
 CONFIG_KPROBES=y
+# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
+# CONFIG_HAVE_IOREMAP_PROT is not set
 CONFIG_HAVE_KPROBES=y
 # CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_ARCH_TRACEHOOK is not set
 # CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+CONFIG_HAVE_CLK=y
 CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
@@ -91,12 +97,13 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-# CONFIG_KMOD is not set
+CONFIG_KMOD=y
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -130,6 +137,7 @@ CONFIG_BOARD_ATSTK1000=y
 CONFIG_BOARD_ATSTK1002=y
 # CONFIG_BOARD_ATSTK1003 is not set
 # CONFIG_BOARD_ATSTK1004 is not set
+# CONFIG_BOARD_ATSTK1006 is not set
 # CONFIG_BOARD_ATSTK100X_CUSTOM is not set
 # CONFIG_BOARD_ATSTK100X_SPI1 is not set
 # CONFIG_BOARD_ATSTK1000_J2_LED is not set
@@ -150,6 +158,7 @@ CONFIG_PHYS_OFFSET=0x10000000
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
+CONFIG_QUICKLIST=y
 # CONFIG_HAVE_ARCH_BOOTMEM_NODE is not set
 # CONFIG_ARCH_HAVE_MEMORY_PRESENT is not set
 # CONFIG_NEED_NODE_MEMMAP_SIZE is not set
@@ -168,6 +177,7 @@ CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_RESOURCES_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
+CONFIG_NR_QUICK=2
 CONFIG_VIRT_TO_BUS=y
 # CONFIG_OWNERSHIP_TRACE is not set
 CONFIG_NMI_DEBUGGING=y
@@ -182,6 +192,12 @@ CONFIG_CMDLINE=""
 #
 # Power management options
 #
+CONFIG_PM=y
+# CONFIG_PM_DEBUG is not set
+CONFIG_PM_SLEEP=y
+CONFIG_SUSPEND=y
+CONFIG_SUSPEND_FREEZER=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
 
 #
 # CPU Frequency scaling
@@ -213,10 +229,6 @@ CONFIG_CPU_FREQ_AT32AP=y
 #
 CONFIG_BINFMT_ELF=y
 # CONFIG_BINFMT_MISC is not set
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -230,6 +242,7 @@ CONFIG_XFRM_USER=m
 # CONFIG_XFRM_SUB_POLICY is not set
 # CONFIG_XFRM_MIGRATE is not set
 # CONFIG_XFRM_STATISTICS is not set
+CONFIG_XFRM_IPCOMP=m
 CONFIG_NET_KEY=m
 # CONFIG_NET_KEY_MIGRATE is not set
 CONFIG_INET=y
@@ -284,6 +297,7 @@ CONFIG_IPV6_TUNNEL=m
 # CONFIG_IP_SCTP is not set
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
+CONFIG_STP=m
 CONFIG_BRIDGE=m
 # CONFIG_VLAN_8021Q is not set
 # CONFIG_DECNET is not set
@@ -474,6 +488,7 @@ CONFIG_SCSI_WAIT_SCAN=m
 # CONFIG_SCSI_SAS_LIBSAS is not set
 # CONFIG_SCSI_SRP_ATTRS is not set
 # CONFIG_SCSI_LOWLEVEL is not set
+# CONFIG_SCSI_DH is not set
 CONFIG_ATA=m
 # CONFIG_ATA_NONSTANDARD is not set
 # CONFIG_SATA_PMP is not set
@@ -483,7 +498,6 @@ CONFIG_PATA_AT32=m
 # CONFIG_PATA_PLATFORM is not set
 # CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -625,21 +639,35 @@ CONFIG_I2C_ALGOBIT=m
 #
 # I2C Hardware Bus support
 #
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
 CONFIG_I2C_GPIO=m
 # CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
 # CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
 # CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_STUB is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
 # CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
 
 #
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
+CONFIG_AT24=m
 # CONFIG_SENSORS_EEPROM is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_TPS65010 is not set
 # CONFIG_SENSORS_MAX6875 is not set
@@ -664,27 +692,32 @@ CONFIG_SPI_ATMEL=y
 # CONFIG_SPI_AT25 is not set
 CONFIG_SPI_SPIDEV=m
 # CONFIG_SPI_TLE62X0 is not set
-CONFIG_HAVE_GPIO_LIB=y
-
-#
-# GPIO Support
-#
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
 # CONFIG_DEBUG_GPIO is not set
+CONFIG_GPIO_SYSFS=y
 
 #
 # I2C GPIO expanders:
 #
+# CONFIG_GPIO_MAX732X is not set
 # CONFIG_GPIO_PCA953X is not set
 # CONFIG_GPIO_PCF857X is not set
 
 #
+# PCI GPIO expanders:
+#
+
+#
 # SPI GPIO expanders:
 #
+# CONFIG_GPIO_MAX7301 is not set
 # CONFIG_GPIO_MCP23S08 is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 # CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
 CONFIG_WATCHDOG=y
 # CONFIG_WATCHDOG_NOWAYOUT is not set
 
@@ -703,6 +736,7 @@ CONFIG_SSB_POSSIBLE=y
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
 
@@ -754,6 +788,9 @@ CONFIG_FB_ATMEL=y
 CONFIG_BACKLIGHT_LCD_SUPPORT=y
 CONFIG_LCD_CLASS_DEVICE=y
 CONFIG_LCD_LTV350QV=y
+# CONFIG_LCD_ILI9320 is not set
+# CONFIG_LCD_VGG2432A4 is not set
+# CONFIG_LCD_PLATFORM is not set
 # CONFIG_BACKLIGHT_CLASS_DEVICE is not set
 
 #
@@ -761,15 +798,7 @@ CONFIG_LCD_LTV350QV=y
 #
 # CONFIG_DISPLAY_SUPPORT is not set
 # CONFIG_LOGO is not set
-
-#
-# Sound
-#
 CONFIG_SOUND=m
-
-#
-# Advanced Linux Sound Architecture
-#
 CONFIG_SND=m
 CONFIG_SND_TIMER=m
 CONFIG_SND_PCM=m
@@ -783,37 +812,11 @@ CONFIG_SND_PCM_OSS_PLUGINS=y
 # CONFIG_SND_VERBOSE_PROCFS is not set
 # CONFIG_SND_VERBOSE_PRINTK is not set
 # CONFIG_SND_DEBUG is not set
-
-#
-# Generic devices
-#
-# CONFIG_SND_DUMMY is not set
-# CONFIG_SND_MTPAV is not set
-# CONFIG_SND_SERIAL_U16550 is not set
-# CONFIG_SND_MPU401 is not set
-
-#
-# SPI devices
-#
+# CONFIG_SND_DRIVERS is not set
+CONFIG_SND_SPI=y
 CONFIG_SND_AT73C213=m
 CONFIG_SND_AT73C213_TARGET_BITRATE=48000
-
-#
-# System on Chip audio support
-#
 # CONFIG_SND_SOC is not set
-
-#
-# ALSA SoC audio for Freescale SOCs
-#
-
-#
-# SoC Audio for the Texas Instruments OMAP
-#
-
-#
-# Open Sound System
-#
 # CONFIG_SOUND_PRIME is not set
 # CONFIG_HID_SUPPORT is not set
 CONFIG_USB_SUPPORT=y
@@ -836,7 +839,7 @@ CONFIG_USB_GADGET_ATMEL_USBA=y
 CONFIG_USB_ATMEL_USBA=y
 # CONFIG_USB_GADGET_FSL_USB2 is not set
 # CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_PXA2XX is not set
+# CONFIG_USB_GADGET_PXA25X is not set
 # CONFIG_USB_GADGET_M66592 is not set
 # CONFIG_USB_GADGET_PXA27X is not set
 # CONFIG_USB_GADGET_GOKU is not set
@@ -855,21 +858,24 @@ CONFIG_USB_FILE_STORAGE=m
 CONFIG_USB_G_SERIAL=m
 # CONFIG_USB_MIDI_GADGET is not set
 # CONFIG_USB_G_PRINTER is not set
-CONFIG_MMC=m
+CONFIG_USB_CDC_COMPOSITE=m
+CONFIG_MMC=y
 # CONFIG_MMC_DEBUG is not set
 # CONFIG_MMC_UNSAFE_RESUME is not set
 
 #
 # MMC/SD Card Drivers
 #
-CONFIG_MMC_BLOCK=m
+CONFIG_MMC_BLOCK=y
 CONFIG_MMC_BLOCK_BOUNCE=y
 # CONFIG_SDIO_UART is not set
-CONFIG_MMC_TEST=m
+# CONFIG_MMC_TEST is not set
 
 #
 # MMC/SD Host Controller Drivers
 #
+# CONFIG_MMC_SDHCI is not set
+CONFIG_MMC_ATMELMCI=y
 CONFIG_MMC_SPI=m
 # CONFIG_MEMSTICK is not set
 CONFIG_NEW_LEDS=y
@@ -879,7 +885,9 @@ CONFIG_LEDS_CLASS=m
 # LED drivers
 #
 CONFIG_LEDS_ATMEL_PWM=m
+# CONFIG_LEDS_PCA9532 is not set
 CONFIG_LEDS_GPIO=m
+# CONFIG_LEDS_PCA955X is not set
 
 #
 # LED Triggers
@@ -918,10 +926,13 @@ CONFIG_RTC_INTF_DEV=y
 # CONFIG_RTC_DRV_PCF8583 is not set
 # CONFIG_RTC_DRV_M41T80 is not set
 # CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
 
 #
 # SPI RTC drivers
 #
+# CONFIG_RTC_DRV_M41T94 is not set
+# CONFIG_RTC_DRV_DS1305 is not set
 # CONFIG_RTC_DRV_MAX6902 is not set
 # CONFIG_RTC_DRV_R9701 is not set
 # CONFIG_RTC_DRV_RS5C348 is not set
@@ -941,18 +952,31 @@ CONFIG_RTC_INTF_DEV=y
 # on-CPU RTC drivers
 #
 CONFIG_RTC_DRV_AT32AP700X=y
+CONFIG_DMADEVICES=y
+
+#
+# DMA Devices
+#
+CONFIG_DW_DMAC=y
+CONFIG_DMA_ENGINE=y
+
+#
+# DMA Clients
+#
+# CONFIG_NET_DMA is not set
+CONFIG_DMATEST=m
 # CONFIG_UIO is not set
 
 #
 # File systems
 #
-CONFIG_EXT2_FS=m
+CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XATTR is not set
 # CONFIG_EXT2_FS_XIP is not set
-CONFIG_EXT3_FS=m
+CONFIG_EXT3_FS=y
 # CONFIG_EXT3_FS_XATTR is not set
 # CONFIG_EXT4DEV_FS is not set
-CONFIG_JBD=m
+CONFIG_JBD=y
 # CONFIG_JBD_DEBUG is not set
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
@@ -1018,6 +1042,7 @@ CONFIG_JFFS2_RTIME=y
 # CONFIG_CRAMFS is not set
 # CONFIG_VXFS_FS is not set
 CONFIG_MINIX_FS=m
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
 # CONFIG_ROMFS_FS is not set
@@ -1028,13 +1053,12 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 # CONFIG_NFS_V4 is not set
-# CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -1104,6 +1128,8 @@ CONFIG_DEBUG_FS=y
 CONFIG_DEBUG_KERNEL=y
 # CONFIG_DEBUG_SHIRQ is not set
 CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
 CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
@@ -1124,6 +1150,7 @@ CONFIG_DEBUG_BUGVERBOSE=y
 # CONFIG_DEBUG_INFO is not set
 # CONFIG_DEBUG_VM is not set
 # CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 CONFIG_FRAME_POINTER=y
@@ -1188,6 +1215,10 @@ CONFIG_CRYPTO_HMAC=m
 # CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=m
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
 CONFIG_CRYPTO_SHA1=m
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
@@ -1228,12 +1259,14 @@ CONFIG_BITREVERSE=y
 # CONFIG_GENERIC_FIND_NEXT_BIT is not set
 CONFIG_CRC_CCITT=m
 # CONFIG_CRC16 is not set
+CONFIG_CRC_T10DIF=m
 CONFIG_CRC_ITU_T=m
 CONFIG_CRC32=y
 CONFIG_CRC7=m
 # CONFIG_LIBCRC32C is not set
 CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=y
+CONFIG_GENERIC_ALLOCATOR=y
 CONFIG_PLIST=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
diff --git a/arch/avr32/configs/atstk1003_defconfig b/arch/avr32/configs/atstk1003_defconfig
index 5a4ae6b5d28f..5477ed3183b4 100644
--- a/arch/avr32/configs/atstk1003_defconfig
+++ b/arch/avr32/configs/atstk1003_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc3
-# Mon May 26 13:33:05 2008
+# Linux kernel version: 2.6.27-rc1
+# Tue Aug  5 15:34:44 2008
 #
 CONFIG_AVR32=y
 CONFIG_GENERIC_GPIO=y
@@ -80,10 +80,16 @@ CONFIG_PROFILING=y
 CONFIG_OPROFILE=m
 CONFIG_HAVE_OPROFILE=y
 CONFIG_KPROBES=y
+# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
+# CONFIG_HAVE_IOREMAP_PROT is not set
 CONFIG_HAVE_KPROBES=y
 # CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_ARCH_TRACEHOOK is not set
 # CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+CONFIG_HAVE_CLK=y
 CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=1
@@ -93,12 +99,13 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-# CONFIG_KMOD is not set
+CONFIG_KMOD=y
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -132,6 +139,7 @@ CONFIG_BOARD_ATSTK1000=y
 # CONFIG_BOARD_ATSTK1002 is not set
 CONFIG_BOARD_ATSTK1003=y
 # CONFIG_BOARD_ATSTK1004 is not set
+# CONFIG_BOARD_ATSTK1006 is not set
 # CONFIG_BOARD_ATSTK100X_CUSTOM is not set
 # CONFIG_BOARD_ATSTK100X_SPI1 is not set
 # CONFIG_BOARD_ATSTK1000_J2_LED is not set
@@ -152,6 +160,7 @@ CONFIG_PHYS_OFFSET=0x10000000
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
+CONFIG_QUICKLIST=y
 # CONFIG_HAVE_ARCH_BOOTMEM_NODE is not set
 # CONFIG_ARCH_HAVE_MEMORY_PRESENT is not set
 # CONFIG_NEED_NODE_MEMMAP_SIZE is not set
@@ -170,6 +179,7 @@ CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_RESOURCES_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
+CONFIG_NR_QUICK=2
 CONFIG_VIRT_TO_BUS=y
 # CONFIG_OWNERSHIP_TRACE is not set
 CONFIG_NMI_DEBUGGING=y
@@ -184,6 +194,12 @@ CONFIG_CMDLINE=""
 #
 # Power management options
 #
+CONFIG_PM=y
+# CONFIG_PM_DEBUG is not set
+CONFIG_PM_SLEEP=y
+CONFIG_SUSPEND=y
+CONFIG_SUSPEND_FREEZER=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
 
 #
 # CPU Frequency scaling
@@ -215,10 +231,6 @@ CONFIG_CPU_FREQ_AT32AP=y
 #
 CONFIG_BINFMT_ELF=y
 # CONFIG_BINFMT_MISC is not set
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -449,6 +461,7 @@ CONFIG_SCSI_WAIT_SCAN=m
 CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_ISCSI_TCP is not set
 # CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_DH is not set
 CONFIG_ATA=m
 # CONFIG_ATA_NONSTANDARD is not set
 # CONFIG_SATA_PMP is not set
@@ -458,7 +471,6 @@ CONFIG_PATA_AT32=m
 # CONFIG_PATA_PLATFORM is not set
 # CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -575,21 +587,35 @@ CONFIG_I2C_ALGOBIT=m
 #
 # I2C Hardware Bus support
 #
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
 CONFIG_I2C_GPIO=m
 # CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
 # CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
 # CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_STUB is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
 # CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
 
 #
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
+CONFIG_AT24=m
 # CONFIG_SENSORS_EEPROM is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_TPS65010 is not set
 # CONFIG_SENSORS_MAX6875 is not set
@@ -614,27 +640,32 @@ CONFIG_SPI_ATMEL=y
 # CONFIG_SPI_AT25 is not set
 CONFIG_SPI_SPIDEV=m
 # CONFIG_SPI_TLE62X0 is not set
-CONFIG_HAVE_GPIO_LIB=y
-
-#
-# GPIO Support
-#
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
 # CONFIG_DEBUG_GPIO is not set
+CONFIG_GPIO_SYSFS=y
 
 #
 # I2C GPIO expanders:
 #
+# CONFIG_GPIO_MAX732X is not set
 # CONFIG_GPIO_PCA953X is not set
 # CONFIG_GPIO_PCF857X is not set
 
 #
+# PCI GPIO expanders:
+#
+
+#
 # SPI GPIO expanders:
 #
+# CONFIG_GPIO_MAX7301 is not set
 # CONFIG_GPIO_MCP23S08 is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 # CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
 CONFIG_WATCHDOG=y
 # CONFIG_WATCHDOG_NOWAYOUT is not set
 
@@ -653,6 +684,7 @@ CONFIG_SSB_POSSIBLE=y
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
 
@@ -684,15 +716,7 @@ CONFIG_SSB_POSSIBLE=y
 # Display device support
 #
 # CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Sound
-#
 CONFIG_SOUND=m
-
-#
-# Advanced Linux Sound Architecture
-#
 CONFIG_SND=m
 CONFIG_SND_TIMER=m
 CONFIG_SND_PCM=m
@@ -706,37 +730,11 @@ CONFIG_SND_SUPPORT_OLD_API=y
 CONFIG_SND_VERBOSE_PROCFS=y
 # CONFIG_SND_VERBOSE_PRINTK is not set
 # CONFIG_SND_DEBUG is not set
-
-#
-# Generic devices
-#
-# CONFIG_SND_DUMMY is not set
-# CONFIG_SND_MTPAV is not set
-# CONFIG_SND_SERIAL_U16550 is not set
-# CONFIG_SND_MPU401 is not set
-
-#
-# SPI devices
-#
+# CONFIG_SND_DRIVERS is not set
+CONFIG_SND_SPI=y
 CONFIG_SND_AT73C213=m
 CONFIG_SND_AT73C213_TARGET_BITRATE=48000
-
-#
-# System on Chip audio support
-#
 # CONFIG_SND_SOC is not set
-
-#
-# ALSA SoC audio for Freescale SOCs
-#
-
-#
-# SoC Audio for the Texas Instruments OMAP
-#
-
-#
-# Open Sound System
-#
 # CONFIG_SOUND_PRIME is not set
 # CONFIG_HID_SUPPORT is not set
 CONFIG_USB_SUPPORT=y
@@ -759,7 +757,7 @@ CONFIG_USB_GADGET_ATMEL_USBA=y
 CONFIG_USB_ATMEL_USBA=y
 # CONFIG_USB_GADGET_FSL_USB2 is not set
 # CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_PXA2XX is not set
+# CONFIG_USB_GADGET_PXA25X is not set
 # CONFIG_USB_GADGET_M66592 is not set
 # CONFIG_USB_GADGET_PXA27X is not set
 # CONFIG_USB_GADGET_GOKU is not set
@@ -778,21 +776,24 @@ CONFIG_USB_FILE_STORAGE=m
 CONFIG_USB_G_SERIAL=m
 # CONFIG_USB_MIDI_GADGET is not set
 # CONFIG_USB_G_PRINTER is not set
-CONFIG_MMC=m
+CONFIG_USB_CDC_COMPOSITE=m
+CONFIG_MMC=y
 # CONFIG_MMC_DEBUG is not set
 # CONFIG_MMC_UNSAFE_RESUME is not set
 
 #
 # MMC/SD Card Drivers
 #
-CONFIG_MMC_BLOCK=m
-# CONFIG_MMC_BLOCK_BOUNCE is not set
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_BLOCK_BOUNCE=y
 # CONFIG_SDIO_UART is not set
-# CONFIG_MMC_TEST is not set
+CONFIG_MMC_TEST=m
 
 #
 # MMC/SD Host Controller Drivers
 #
+# CONFIG_MMC_SDHCI is not set
+CONFIG_MMC_ATMELMCI=y
 CONFIG_MMC_SPI=m
 # CONFIG_MEMSTICK is not set
 CONFIG_NEW_LEDS=y
@@ -802,7 +803,9 @@ CONFIG_LEDS_CLASS=y
 # LED drivers
 #
 CONFIG_LEDS_ATMEL_PWM=m
+# CONFIG_LEDS_PCA9532 is not set
 CONFIG_LEDS_GPIO=y
+# CONFIG_LEDS_PCA955X is not set
 
 #
 # LED Triggers
@@ -841,10 +844,13 @@ CONFIG_RTC_INTF_DEV=y
 # CONFIG_RTC_DRV_PCF8583 is not set
 # CONFIG_RTC_DRV_M41T80 is not set
 # CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
 
 #
 # SPI RTC drivers
 #
+# CONFIG_RTC_DRV_M41T94 is not set
+# CONFIG_RTC_DRV_DS1305 is not set
 # CONFIG_RTC_DRV_MAX6902 is not set
 # CONFIG_RTC_DRV_R9701 is not set
 # CONFIG_RTC_DRV_RS5C348 is not set
@@ -864,8 +870,20 @@ CONFIG_RTC_INTF_DEV=y
 # on-CPU RTC drivers
 #
 CONFIG_RTC_DRV_AT32AP700X=y
-CONFIG_UIO=m
-# CONFIG_UIO_SMX is not set
+CONFIG_DMADEVICES=y
+
+#
+# DMA Devices
+#
+CONFIG_DW_DMAC=y
+CONFIG_DMA_ENGINE=y
+
+#
+# DMA Clients
+#
+# CONFIG_NET_DMA is not set
+CONFIG_DMATEST=m
+# CONFIG_UIO is not set
 
 #
 # File systems
@@ -943,6 +961,7 @@ CONFIG_JFFS2_RTIME=y
 # CONFIG_CRAMFS is not set
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
 # CONFIG_ROMFS_FS is not set
@@ -1011,6 +1030,8 @@ CONFIG_DEBUG_FS=y
 CONFIG_DEBUG_KERNEL=y
 # CONFIG_DEBUG_SHIRQ is not set
 CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
 CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
@@ -1029,6 +1050,7 @@ CONFIG_DEBUG_BUGVERBOSE=y
 # CONFIG_DEBUG_INFO is not set
 # CONFIG_DEBUG_VM is not set
 # CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 CONFIG_FRAME_POINTER=y
@@ -1056,6 +1078,7 @@ CONFIG_BITREVERSE=y
 # CONFIG_GENERIC_FIND_NEXT_BIT is not set
 CONFIG_CRC_CCITT=m
 # CONFIG_CRC16 is not set
+CONFIG_CRC_T10DIF=m
 CONFIG_CRC_ITU_T=m
 CONFIG_CRC32=y
 CONFIG_CRC7=m
@@ -1063,6 +1086,7 @@ CONFIG_CRC7=m
 CONFIG_AUDIT_GENERIC=y
 CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=y
+CONFIG_GENERIC_ALLOCATOR=y
 CONFIG_PLIST=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
diff --git a/arch/avr32/configs/atstk1004_defconfig b/arch/avr32/configs/atstk1004_defconfig
index a0912fb7c92e..69e6c0d08ce8 100644
--- a/arch/avr32/configs/atstk1004_defconfig
+++ b/arch/avr32/configs/atstk1004_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc3
-# Mon May 26 13:34:57 2008
+# Linux kernel version: 2.6.27-rc1
+# Tue Aug  5 15:38:56 2008
 #
 CONFIG_AVR32=y
 CONFIG_GENERIC_GPIO=y
@@ -69,10 +69,16 @@ CONFIG_SLOB=y
 # CONFIG_PROFILING is not set
 # CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
+# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
+# CONFIG_HAVE_IOREMAP_PROT is not set
 CONFIG_HAVE_KPROBES=y
 # CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_ARCH_TRACEHOOK is not set
 # CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+CONFIG_HAVE_CLK=y
 # CONFIG_PROC_PAGE_MONITOR is not set
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=1
 # CONFIG_MODULES is not set
@@ -97,6 +103,7 @@ CONFIG_BOARD_ATSTK1000=y
 # CONFIG_BOARD_ATSTK1002 is not set
 # CONFIG_BOARD_ATSTK1003 is not set
 CONFIG_BOARD_ATSTK1004=y
+# CONFIG_BOARD_ATSTK1006 is not set
 # CONFIG_BOARD_ATSTK100X_CUSTOM is not set
 # CONFIG_BOARD_ATSTK100X_SPI1 is not set
 # CONFIG_BOARD_ATSTK1000_J2_LED is not set
@@ -115,6 +122,7 @@ CONFIG_PHYS_OFFSET=0x10000000
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
+CONFIG_QUICKLIST=y
 # CONFIG_HAVE_ARCH_BOOTMEM_NODE is not set
 # CONFIG_ARCH_HAVE_MEMORY_PRESENT is not set
 # CONFIG_NEED_NODE_MEMMAP_SIZE is not set
@@ -133,6 +141,7 @@ CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_RESOURCES_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
+CONFIG_NR_QUICK=2
 CONFIG_VIRT_TO_BUS=y
 # CONFIG_OWNERSHIP_TRACE is not set
 # CONFIG_NMI_DEBUGGING is not set
@@ -147,6 +156,8 @@ CONFIG_CMDLINE=""
 #
 # Power management options
 #
+# CONFIG_PM is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
 
 #
 # CPU Frequency scaling
@@ -164,10 +175,6 @@ CONFIG_CMDLINE=""
 #
 CONFIG_BINFMT_ELF=y
 # CONFIG_BINFMT_MISC is not set
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -390,24 +397,28 @@ CONFIG_SPI_ATMEL=y
 # CONFIG_SPI_AT25 is not set
 # CONFIG_SPI_SPIDEV is not set
 # CONFIG_SPI_TLE62X0 is not set
-CONFIG_HAVE_GPIO_LIB=y
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_GPIO_SYSFS is not set
 
 #
-# GPIO Support
+# I2C GPIO expanders:
 #
 
 #
-# I2C GPIO expanders:
+# PCI GPIO expanders:
 #
 
 #
 # SPI GPIO expanders:
 #
+# CONFIG_GPIO_MAX7301 is not set
 # CONFIG_GPIO_MCP23S08 is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 # CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
 CONFIG_WATCHDOG=y
 # CONFIG_WATCHDOG_NOWAYOUT is not set
 
@@ -426,6 +437,7 @@ CONFIG_SSB_POSSIBLE=y
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
 
@@ -477,6 +489,9 @@ CONFIG_FB_ATMEL=y
 CONFIG_BACKLIGHT_LCD_SUPPORT=y
 CONFIG_LCD_CLASS_DEVICE=y
 CONFIG_LCD_LTV350QV=y
+# CONFIG_LCD_ILI9320 is not set
+# CONFIG_LCD_VGG2432A4 is not set
+# CONFIG_LCD_PLATFORM is not set
 # CONFIG_BACKLIGHT_CLASS_DEVICE is not set
 
 #
@@ -484,10 +499,6 @@ CONFIG_LCD_LTV350QV=y
 #
 # CONFIG_DISPLAY_SUPPORT is not set
 # CONFIG_LOGO is not set
-
-#
-# Sound
-#
 # CONFIG_SOUND is not set
 CONFIG_USB_SUPPORT=y
 # CONFIG_USB_ARCH_HAS_HCD is not set
@@ -507,7 +518,7 @@ CONFIG_USB_GADGET_ATMEL_USBA=y
 CONFIG_USB_ATMEL_USBA=y
 # CONFIG_USB_GADGET_FSL_USB2 is not set
 # CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_PXA2XX is not set
+# CONFIG_USB_GADGET_PXA25X is not set
 # CONFIG_USB_GADGET_M66592 is not set
 # CONFIG_USB_GADGET_PXA27X is not set
 # CONFIG_USB_GADGET_GOKU is not set
@@ -525,6 +536,7 @@ CONFIG_USB_ETH=y
 # CONFIG_USB_G_SERIAL is not set
 # CONFIG_USB_MIDI_GADGET is not set
 # CONFIG_USB_G_PRINTER is not set
+# CONFIG_USB_CDC_COMPOSITE is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
@@ -547,6 +559,8 @@ CONFIG_RTC_INTF_DEV=y
 #
 # SPI RTC drivers
 #
+# CONFIG_RTC_DRV_M41T94 is not set
+# CONFIG_RTC_DRV_DS1305 is not set
 # CONFIG_RTC_DRV_MAX6902 is not set
 # CONFIG_RTC_DRV_R9701 is not set
 # CONFIG_RTC_DRV_RS5C348 is not set
@@ -566,6 +580,7 @@ CONFIG_RTC_INTF_DEV=y
 # on-CPU RTC drivers
 #
 CONFIG_RTC_DRV_AT32AP700X=y
+# CONFIG_DMADEVICES is not set
 # CONFIG_UIO is not set
 
 #
@@ -620,6 +635,7 @@ CONFIG_MAGIC_SYSRQ=y
 # CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_SAMPLES is not set
 
 #
@@ -638,12 +654,14 @@ CONFIG_BITREVERSE=y
 # CONFIG_GENERIC_FIND_NEXT_BIT is not set
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
 # CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
 # CONFIG_LIBCRC32C is not set
 CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=y
+CONFIG_GENERIC_ALLOCATOR=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
diff --git a/arch/avr32/configs/atstk1006_defconfig b/arch/avr32/configs/atstk1006_defconfig
new file mode 100644
index 000000000000..8b6e54c9946a
--- /dev/null
+++ b/arch/avr32/configs/atstk1006_defconfig
@@ -0,0 +1,1304 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.27-rc1
+# Tue Aug  5 15:40:26 2008
+#
+CONFIG_AVR32=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_BUG=y
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+CONFIG_POSIX_MQUEUE=y
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+# CONFIG_GROUP_SCHED is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+CONFIG_RELAY=y
+# CONFIG_NAMESPACES is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_EMBEDDED=y
+# CONFIG_SYSCTL_SYSCALL is not set
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+# CONFIG_COMPAT_BRK is not set
+# CONFIG_BASE_FULL is not set
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLUB_DEBUG=y
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
+# CONFIG_SLOB is not set
+CONFIG_PROFILING=y
+# CONFIG_MARKERS is not set
+CONFIG_OPROFILE=m
+CONFIG_HAVE_OPROFILE=y
+CONFIG_KPROBES=y
+# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
+# CONFIG_HAVE_IOREMAP_PROT is not set
+CONFIG_HAVE_KPROBES=y
+# CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_ARCH_TRACEHOOK is not set
+# CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+CONFIG_HAVE_CLK=y
+CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=1
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+# CONFIG_IOSCHED_AS is not set
+# CONFIG_IOSCHED_DEADLINE is not set
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+CONFIG_CLASSIC_RCU=y
+
+#
+# System Type and features
+#
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_SUBARCH_AVR32B=y
+CONFIG_MMU=y
+CONFIG_PERFORMANCE_COUNTERS=y
+CONFIG_PLATFORM_AT32AP=y
+CONFIG_CPU_AT32AP700X=y
+CONFIG_CPU_AT32AP7000=y
+CONFIG_BOARD_ATSTK1000=y
+# CONFIG_BOARD_ATNGW100 is not set
+# CONFIG_BOARD_ATSTK1002 is not set
+# CONFIG_BOARD_ATSTK1003 is not set
+# CONFIG_BOARD_ATSTK1004 is not set
+CONFIG_BOARD_ATSTK1006=y
+# CONFIG_BOARD_ATSTK100X_CUSTOM is not set
+# CONFIG_BOARD_ATSTK100X_SPI1 is not set
+# CONFIG_BOARD_ATSTK1000_J2_LED is not set
+# CONFIG_BOARD_ATSTK1000_J2_LED8 is not set
+# CONFIG_BOARD_ATSTK1000_J2_RGB is not set
+CONFIG_BOARD_ATSTK1000_EXTDAC=y
+CONFIG_LOADER_U_BOOT=y
+
+#
+# Atmel AVR32 AP options
+#
+# CONFIG_AP700X_32_BIT_SMC is not set
+CONFIG_AP700X_16_BIT_SMC=y
+# CONFIG_AP700X_8_BIT_SMC is not set
+CONFIG_LOAD_ADDRESS=0x10000000
+CONFIG_ENTRY_ADDRESS=0x90000000
+CONFIG_PHYS_OFFSET=0x10000000
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+CONFIG_QUICKLIST=y
+# CONFIG_HAVE_ARCH_BOOTMEM_NODE is not set
+# CONFIG_ARCH_HAVE_MEMORY_PRESENT is not set
+# CONFIG_NEED_NODE_MEMMAP_SIZE is not set
+CONFIG_ARCH_FLATMEM_ENABLE=y
+# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+# CONFIG_ARCH_SPARSEMEM_ENABLE is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_NR_QUICK=2
+CONFIG_VIRT_TO_BUS=y
+# CONFIG_OWNERSHIP_TRACE is not set
+CONFIG_NMI_DEBUGGING=y
+# CONFIG_HZ_100 is not set
+CONFIG_HZ_250=y
+# CONFIG_HZ_300 is not set
+# CONFIG_HZ_1000 is not set
+CONFIG_HZ=250
+# CONFIG_SCHED_HRTICK is not set
+CONFIG_CMDLINE=""
+
+#
+# Power management options
+#
+CONFIG_PM=y
+# CONFIG_PM_DEBUG is not set
+CONFIG_PM_SLEEP=y
+CONFIG_SUSPEND=y
+CONFIG_SUSPEND_FREEZER=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+
+#
+# CPU Frequency scaling
+#
+CONFIG_CPU_FREQ=y
+CONFIG_CPU_FREQ_TABLE=y
+# CONFIG_CPU_FREQ_DEBUG is not set
+# CONFIG_CPU_FREQ_STAT is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
+CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
+# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
+CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
+# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
+CONFIG_CPU_FREQ_GOV_USERSPACE=y
+CONFIG_CPU_FREQ_GOV_ONDEMAND=y
+# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
+CONFIG_CPU_FREQ_AT32AP=y
+
+#
+# Bus options
+#
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Executable file formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_MISC is not set
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+CONFIG_PACKET_MMAP=y
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+CONFIG_XFRM_USER=m
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
+CONFIG_XFRM_IPCOMP=m
+CONFIG_NET_KEY=m
+# CONFIG_NET_KEY_MIGRATE is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+# CONFIG_IP_PNP_BOOTP is not set
+# CONFIG_IP_PNP_RARP is not set
+CONFIG_NET_IPIP=m
+CONFIG_NET_IPGRE=m
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+CONFIG_INET_AH=m
+CONFIG_INET_ESP=m
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+CONFIG_INET_TUNNEL=m
+CONFIG_INET_XFRM_MODE_TRANSPORT=m
+CONFIG_INET_XFRM_MODE_TUNNEL=m
+CONFIG_INET_XFRM_MODE_BEET=m
+# CONFIG_INET_LRO is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+CONFIG_IPV6=m
+# CONFIG_IPV6_PRIVACY is not set
+# CONFIG_IPV6_ROUTER_PREF is not set
+# CONFIG_IPV6_OPTIMISTIC_DAD is not set
+CONFIG_INET6_AH=m
+CONFIG_INET6_ESP=m
+CONFIG_INET6_IPCOMP=m
+# CONFIG_IPV6_MIP6 is not set
+CONFIG_INET6_XFRM_TUNNEL=m
+CONFIG_INET6_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_TRANSPORT=m
+CONFIG_INET6_XFRM_MODE_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_BEET=m
+# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
+CONFIG_IPV6_SIT=m
+CONFIG_IPV6_NDISC_NODETYPE=y
+CONFIG_IPV6_TUNNEL=m
+# CONFIG_IPV6_MULTIPLE_TABLES is not set
+# CONFIG_IPV6_MROUTE is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+CONFIG_STP=m
+CONFIG_BRIDGE=m
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+CONFIG_LLC=m
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_NET_TCPPROBE is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
+# CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+# CONFIG_PREVENT_FIRMWARE_BUILD is not set
+# CONFIG_FW_LOADER is not set
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_CFI_INTELEXT is not set
+CONFIG_MTD_CFI_AMDSTD=y
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+CONFIG_MTD_PHYSMAP=y
+CONFIG_MTD_PHYSMAP_START=0x8000000
+CONFIG_MTD_PHYSMAP_LEN=0x0
+CONFIG_MTD_PHYSMAP_BANKWIDTH=2
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+CONFIG_MTD_DATAFLASH=m
+CONFIG_MTD_M25P80=m
+CONFIG_M25PXX_USE_FAST_READ=y
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+CONFIG_MTD_NAND=y
+# CONFIG_MTD_NAND_VERIFY_WRITE is not set
+# CONFIG_MTD_NAND_ECC_SMC is not set
+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
+CONFIG_MTD_NAND_IDS=y
+# CONFIG_MTD_NAND_DISKONCHIP is not set
+CONFIG_MTD_NAND_ATMEL=y
+CONFIG_MTD_NAND_ATMEL_ECC_HW=y
+# CONFIG_MTD_NAND_ATMEL_ECC_SOFT is not set
+# CONFIG_MTD_NAND_ATMEL_ECC_NONE is not set
+# CONFIG_MTD_NAND_NANDSIM is not set
+# CONFIG_MTD_NAND_PLATFORM is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# UBI - Unsorted block images
+#
+CONFIG_MTD_UBI=y
+CONFIG_MTD_UBI_WL_THRESHOLD=4096
+CONFIG_MTD_UBI_BEB_RESERVE=1
+# CONFIG_MTD_UBI_GLUEBI is not set
+
+#
+# UBI debugging options
+#
+# CONFIG_MTD_UBI_DEBUG is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=m
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+CONFIG_BLK_DEV_NBD=m
+CONFIG_BLK_DEV_RAM=m
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=4096
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+CONFIG_MISC_DEVICES=y
+CONFIG_ATMEL_PWM=m
+CONFIG_ATMEL_TCLIB=y
+CONFIG_ATMEL_TCB_CLKSRC=y
+CONFIG_ATMEL_TCB_CLKSRC_BLOCK=0
+# CONFIG_EEPROM_93CX6 is not set
+CONFIG_ATMEL_SSC=m
+# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_HAVE_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=m
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_SCSI_PROC_FS is not set
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=m
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+CONFIG_BLK_DEV_SR=m
+# CONFIG_BLK_DEV_SR_VENDOR is not set
+# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+# CONFIG_SCSI_MULTI_LUN is not set
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+# CONFIG_SCSI_LOWLEVEL is not set
+# CONFIG_SCSI_DH is not set
+CONFIG_ATA=m
+# CONFIG_ATA_NONSTANDARD is not set
+# CONFIG_SATA_PMP is not set
+CONFIG_ATA_SFF=y
+# CONFIG_SATA_MV is not set
+CONFIG_PATA_AT32=m
+# CONFIG_PATA_PLATFORM is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+CONFIG_TUN=m
+# CONFIG_VETH is not set
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+# CONFIG_MARVELL_PHY is not set
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+# CONFIG_SMSC_PHY is not set
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
+# CONFIG_FIXED_PHY is not set
+# CONFIG_MDIO_BITBANG is not set
+CONFIG_NET_ETHERNET=y
+# CONFIG_MII is not set
+CONFIG_MACB=y
+# CONFIG_ENC28J60 is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_B44 is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
+# CONFIG_WAN is not set
+CONFIG_PPP=m
+# CONFIG_PPP_MULTILINK is not set
+# CONFIG_PPP_FILTER is not set
+CONFIG_PPP_ASYNC=m
+# CONFIG_PPP_SYNC_TTY is not set
+CONFIG_PPP_DEFLATE=m
+CONFIG_PPP_BSDCOMP=m
+# CONFIG_PPP_MPPE is not set
+# CONFIG_PPPOE is not set
+# CONFIG_PPPOL2TP is not set
+# CONFIG_SLIP is not set
+CONFIG_SLHC=m
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=m
+# CONFIG_INPUT_FF_MEMLESS is not set
+CONFIG_INPUT_POLLDEV=m
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=m
+CONFIG_INPUT_MOUSEDEV_PSAUX=y
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+CONFIG_INPUT_EVDEV=m
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ATKBD is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+CONFIG_KEYBOARD_GPIO=m
+CONFIG_INPUT_MOUSE=y
+# CONFIG_MOUSE_PS2 is not set
+# CONFIG_MOUSE_SERIAL is not set
+# CONFIG_MOUSE_VSXXXAA is not set
+CONFIG_MOUSE_GPIO=m
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+# CONFIG_VT is not set
+# CONFIG_DEVKMEM is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_ATMEL=y
+CONFIG_SERIAL_ATMEL_CONSOLE=y
+CONFIG_SERIAL_ATMEL_PDC=y
+# CONFIG_SERIAL_ATMEL_TTYAT is not set
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_I2C=m
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_CHARDEV=m
+CONFIG_I2C_ALGOBIT=m
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+CONFIG_I2C_GPIO=m
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_DS1682 is not set
+# CONFIG_AT24 is not set
+# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_TPS65010 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+CONFIG_SPI=y
+# CONFIG_SPI_DEBUG is not set
+CONFIG_SPI_MASTER=y
+
+#
+# SPI Master Controller Drivers
+#
+CONFIG_SPI_ATMEL=y
+# CONFIG_SPI_BITBANG is not set
+
+#
+# SPI Protocol Masters
+#
+# CONFIG_SPI_AT25 is not set
+CONFIG_SPI_SPIDEV=m
+# CONFIG_SPI_TLE62X0 is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+CONFIG_GPIO_SYSFS=y
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_GPIO_MAX7301 is not set
+# CONFIG_GPIO_MCP23S08 is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+CONFIG_WATCHDOG=y
+# CONFIG_WATCHDOG_NOWAYOUT is not set
+
+#
+# Watchdog Device Drivers
+#
+# CONFIG_SOFT_WATCHDOG is not set
+CONFIG_AT32AP700X_WDT=y
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
+
+#
+# Multimedia devices
+#
+
+#
+# Multimedia core support
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
+# CONFIG_DAB is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
+# CONFIG_FB_SYS_FOPS is not set
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_S1D13XXX is not set
+CONFIG_FB_ATMEL=y
+# CONFIG_FB_VIRTUAL is not set
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+CONFIG_LCD_CLASS_DEVICE=y
+CONFIG_LCD_LTV350QV=y
+# CONFIG_LCD_ILI9320 is not set
+# CONFIG_LCD_VGG2432A4 is not set
+# CONFIG_LCD_PLATFORM is not set
+# CONFIG_BACKLIGHT_CLASS_DEVICE is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+# CONFIG_LOGO is not set
+CONFIG_SOUND=m
+CONFIG_SND=m
+CONFIG_SND_TIMER=m
+CONFIG_SND_PCM=m
+# CONFIG_SND_SEQUENCER is not set
+CONFIG_SND_OSSEMUL=y
+CONFIG_SND_MIXER_OSS=m
+CONFIG_SND_PCM_OSS=m
+CONFIG_SND_PCM_OSS_PLUGINS=y
+# CONFIG_SND_DYNAMIC_MINORS is not set
+# CONFIG_SND_SUPPORT_OLD_API is not set
+# CONFIG_SND_VERBOSE_PROCFS is not set
+# CONFIG_SND_VERBOSE_PRINTK is not set
+# CONFIG_SND_DEBUG is not set
+CONFIG_SND_DRIVERS=y
+# CONFIG_SND_DUMMY is not set
+# CONFIG_SND_MTPAV is not set
+# CONFIG_SND_SERIAL_U16550 is not set
+# CONFIG_SND_MPU401 is not set
+CONFIG_SND_SPI=y
+CONFIG_SND_AT73C213=m
+CONFIG_SND_AT73C213_TARGET_BITRATE=48000
+# CONFIG_SND_SOC is not set
+# CONFIG_SOUND_PRIME is not set
+# CONFIG_HID_SUPPORT is not set
+CONFIG_USB_SUPPORT=y
+# CONFIG_USB_ARCH_HAS_HCD is not set
+# CONFIG_USB_ARCH_HAS_OHCI is not set
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+CONFIG_USB_GADGET=y
+# CONFIG_USB_GADGET_DEBUG is not set
+# CONFIG_USB_GADGET_DEBUG_FILES is not set
+# CONFIG_USB_GADGET_DEBUG_FS is not set
+CONFIG_USB_GADGET_SELECTED=y
+# CONFIG_USB_GADGET_AMD5536UDC is not set
+CONFIG_USB_GADGET_ATMEL_USBA=y
+CONFIG_USB_ATMEL_USBA=y
+# CONFIG_USB_GADGET_FSL_USB2 is not set
+# CONFIG_USB_GADGET_NET2280 is not set
+# CONFIG_USB_GADGET_PXA25X is not set
+# CONFIG_USB_GADGET_M66592 is not set
+# CONFIG_USB_GADGET_PXA27X is not set
+# CONFIG_USB_GADGET_GOKU is not set
+# CONFIG_USB_GADGET_LH7A40X is not set
+# CONFIG_USB_GADGET_OMAP is not set
+# CONFIG_USB_GADGET_S3C2410 is not set
+# CONFIG_USB_GADGET_AT91 is not set
+# CONFIG_USB_GADGET_DUMMY_HCD is not set
+CONFIG_USB_GADGET_DUALSPEED=y
+CONFIG_USB_ZERO=m
+CONFIG_USB_ETH=m
+CONFIG_USB_ETH_RNDIS=y
+CONFIG_USB_GADGETFS=m
+CONFIG_USB_FILE_STORAGE=m
+# CONFIG_USB_FILE_STORAGE_TEST is not set
+CONFIG_USB_G_SERIAL=m
+# CONFIG_USB_MIDI_GADGET is not set
+# CONFIG_USB_G_PRINTER is not set
+# CONFIG_USB_CDC_COMPOSITE is not set
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+# CONFIG_MMC_UNSAFE_RESUME is not set
+
+#
+# MMC/SD Card Drivers
+#
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_BLOCK_BOUNCE=y
+# CONFIG_SDIO_UART is not set
+# CONFIG_MMC_TEST is not set
+
+#
+# MMC/SD Host Controller Drivers
+#
+# CONFIG_MMC_SDHCI is not set
+CONFIG_MMC_ATMELMCI=y
+CONFIG_MMC_SPI=m
+# CONFIG_MEMSTICK is not set
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=m
+
+#
+# LED drivers
+#
+CONFIG_LEDS_ATMEL_PWM=m
+# CONFIG_LEDS_PCA9532 is not set
+CONFIG_LEDS_GPIO=m
+# CONFIG_LEDS_PCA955X is not set
+
+#
+# LED Triggers
+#
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_TIMER=m
+CONFIG_LEDS_TRIGGER_HEARTBEAT=m
+CONFIG_LEDS_TRIGGER_DEFAULT_ON=m
+# CONFIG_ACCESSIBILITY is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
+
+#
+# SPI RTC drivers
+#
+# CONFIG_RTC_DRV_M41T94 is not set
+# CONFIG_RTC_DRV_DS1305 is not set
+# CONFIG_RTC_DRV_MAX6902 is not set
+# CONFIG_RTC_DRV_R9701 is not set
+# CONFIG_RTC_DRV_RS5C348 is not set
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+CONFIG_RTC_DRV_AT32AP700X=y
+CONFIG_DMADEVICES=y
+
+#
+# DMA Devices
+#
+CONFIG_DW_DMAC=y
+CONFIG_DMA_ENGINE=y
+
+#
+# DMA Clients
+#
+# CONFIG_NET_DMA is not set
+CONFIG_DMATEST=m
+# CONFIG_UIO is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=m
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=m
+# CONFIG_EXT3_FS_XATTR is not set
+# CONFIG_EXT4DEV_FS is not set
+CONFIG_JBD=m
+# CONFIG_JBD_DEBUG is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_DNOTIFY is not set
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+CONFIG_FUSE_FS=m
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=m
+CONFIG_MSDOS_FS=m
+CONFIG_VFAT_FS=m
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_KCORE=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+# CONFIG_JFFS2_FS_WRITEBUFFER is not set
+# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_XATTR is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+CONFIG_UBIFS_FS=y
+CONFIG_UBIFS_FS_XATTR=y
+# CONFIG_UBIFS_FS_ADVANCED_COMPR is not set
+CONFIG_UBIFS_FS_LZO=y
+CONFIG_UBIFS_FS_ZLIB=y
+# CONFIG_UBIFS_FS_DEBUG is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_VXFS_FS is not set
+CONFIG_MINIX_FS=m
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+# CONFIG_NFS_V4 is not set
+CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+CONFIG_NLS=m
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=m
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+CONFIG_NLS_ISO8859_1=m
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+CONFIG_NLS_UTF8=m
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_UNUSED_SYMBOLS is not set
+CONFIG_DEBUG_FS=y
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+CONFIG_FRAME_POINTER=y
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_KPROBES_SANITY_TEST is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_LKDTM is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_SAMPLES is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_AEAD=m
+CONFIG_CRYPTO_BLKCIPHER=m
+CONFIG_CRYPTO_HASH=m
+CONFIG_CRYPTO_MANAGER=m
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+CONFIG_CRYPTO_AUTHENC=m
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=m
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+CONFIG_CRYPTO_HMAC=m
+# CONFIG_CRYPTO_XCBC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_MD4 is not set
+CONFIG_CRYPTO_MD5=m
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+CONFIG_CRYPTO_SHA1=m
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+CONFIG_CRYPTO_DES=m
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+CONFIG_CRYPTO_DEFLATE=y
+CONFIG_CRYPTO_LZO=y
+# CONFIG_CRYPTO_HW is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
+# CONFIG_GENERIC_FIND_NEXT_BIT is not set
+CONFIG_CRC_CCITT=m
+CONFIG_CRC16=y
+CONFIG_CRC_T10DIF=m
+CONFIG_CRC_ITU_T=m
+CONFIG_CRC32=y
+CONFIG_CRC7=m
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_LZO_COMPRESS=y
+CONFIG_LZO_DECOMPRESS=y
+CONFIG_GENERIC_ALLOCATOR=y
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
diff --git a/include/asm-avr32/Kbuild b/arch/avr32/include/asm/Kbuild
index 3136628ba8d2..3136628ba8d2 100644
--- a/include/asm-avr32/Kbuild
+++ b/arch/avr32/include/asm/Kbuild
diff --git a/include/asm-avr32/a.out.h b/arch/avr32/include/asm/a.out.h
index e46375a34a72..e46375a34a72 100644
--- a/include/asm-avr32/a.out.h
+++ b/arch/avr32/include/asm/a.out.h
diff --git a/include/asm-avr32/addrspace.h b/arch/avr32/include/asm/addrspace.h
index 366794858ec7..366794858ec7 100644
--- a/include/asm-avr32/addrspace.h
+++ b/arch/avr32/include/asm/addrspace.h
diff --git a/include/asm-avr32/asm.h b/arch/avr32/include/asm/asm.h
index a2c64f404b98..a2c64f404b98 100644
--- a/include/asm-avr32/asm.h
+++ b/arch/avr32/include/asm/asm.h
diff --git a/include/asm-avr32/atmel-mci.h b/arch/avr32/include/asm/atmel-mci.h
index c2ea6e1c9aa1..c2ea6e1c9aa1 100644
--- a/include/asm-avr32/atmel-mci.h
+++ b/arch/avr32/include/asm/atmel-mci.h
diff --git a/include/asm-avr32/atomic.h b/arch/avr32/include/asm/atomic.h
index 7ef3862a73d0..7ef3862a73d0 100644
--- a/include/asm-avr32/atomic.h
+++ b/arch/avr32/include/asm/atomic.h
diff --git a/include/asm-avr32/auxvec.h b/arch/avr32/include/asm/auxvec.h
index d5dd435bf8f4..d5dd435bf8f4 100644
--- a/include/asm-avr32/auxvec.h
+++ b/arch/avr32/include/asm/auxvec.h
diff --git a/include/asm-avr32/bitops.h b/arch/avr32/include/asm/bitops.h
index 1a50b69b1a19..1a50b69b1a19 100644
--- a/include/asm-avr32/bitops.h
+++ b/arch/avr32/include/asm/bitops.h
diff --git a/include/asm-avr32/bug.h b/arch/avr32/include/asm/bug.h
index 331d45bab18f..331d45bab18f 100644
--- a/include/asm-avr32/bug.h
+++ b/arch/avr32/include/asm/bug.h
diff --git a/include/asm-avr32/bugs.h b/arch/avr32/include/asm/bugs.h
index 7635e770622e..7635e770622e 100644
--- a/include/asm-avr32/bugs.h
+++ b/arch/avr32/include/asm/bugs.h
diff --git a/include/asm-avr32/byteorder.h b/arch/avr32/include/asm/byteorder.h
index d77b48ba7338..d77b48ba7338 100644
--- a/include/asm-avr32/byteorder.h
+++ b/arch/avr32/include/asm/byteorder.h
diff --git a/include/asm-avr32/cache.h b/arch/avr32/include/asm/cache.h
index d3cf35ab11ab..d3cf35ab11ab 100644
--- a/include/asm-avr32/cache.h
+++ b/arch/avr32/include/asm/cache.h
diff --git a/include/asm-avr32/cachectl.h b/arch/avr32/include/asm/cachectl.h
index 4faf1ce60061..4faf1ce60061 100644
--- a/include/asm-avr32/cachectl.h
+++ b/arch/avr32/include/asm/cachectl.h
diff --git a/include/asm-avr32/cacheflush.h b/arch/avr32/include/asm/cacheflush.h
index 670674749b20..670674749b20 100644
--- a/include/asm-avr32/cacheflush.h
+++ b/arch/avr32/include/asm/cacheflush.h
diff --git a/include/asm-avr32/checksum.h b/arch/avr32/include/asm/checksum.h
index 4ddbfd2486af..4ddbfd2486af 100644
--- a/include/asm-avr32/checksum.h
+++ b/arch/avr32/include/asm/checksum.h
diff --git a/include/asm-avr32/cputime.h b/arch/avr32/include/asm/cputime.h
index e87e0f81cbeb..e87e0f81cbeb 100644
--- a/include/asm-avr32/cputime.h
+++ b/arch/avr32/include/asm/cputime.h
diff --git a/include/asm-avr32/current.h b/arch/avr32/include/asm/current.h
index c7b0549eab8a..c7b0549eab8a 100644
--- a/include/asm-avr32/current.h
+++ b/arch/avr32/include/asm/current.h
diff --git a/include/asm-avr32/delay.h b/arch/avr32/include/asm/delay.h
index a0ed9a9839a5..a0ed9a9839a5 100644
--- a/include/asm-avr32/delay.h
+++ b/arch/avr32/include/asm/delay.h
diff --git a/include/asm-avr32/device.h b/arch/avr32/include/asm/device.h
index d8f9872b0e2d..d8f9872b0e2d 100644
--- a/include/asm-avr32/device.h
+++ b/arch/avr32/include/asm/device.h
diff --git a/include/asm-avr32/div64.h b/arch/avr32/include/asm/div64.h
index d7ddd4fdeca6..d7ddd4fdeca6 100644
--- a/include/asm-avr32/div64.h
+++ b/arch/avr32/include/asm/div64.h
diff --git a/arch/avr32/include/asm/dma-mapping.h b/arch/avr32/include/asm/dma-mapping.h
new file mode 100644
index 000000000000..0399359ab5d8
--- /dev/null
+++ b/arch/avr32/include/asm/dma-mapping.h
@@ -0,0 +1,349 @@
+#ifndef __ASM_AVR32_DMA_MAPPING_H
+#define __ASM_AVR32_DMA_MAPPING_H
+
+#include <linux/mm.h>
+#include <linux/device.h>
+#include <linux/scatterlist.h>
+#include <asm/processor.h>
+#include <asm/cacheflush.h>
+#include <asm/io.h>
+
+extern void dma_cache_sync(struct device *dev, void *vaddr, size_t size,
+	int direction);
+
+/*
+ * Return whether the given device DMA address mask can be supported
+ * properly.  For example, if your device can only drive the low 24-bits
+ * during bus mastering, then you would pass 0x00ffffff as the mask
+ * to this function.
+ */
+static inline int dma_supported(struct device *dev, u64 mask)
+{
+	/* Fix when needed. I really don't know of any limitations */
+	return 1;
+}
+
+static inline int dma_set_mask(struct device *dev, u64 dma_mask)
+{
+	if (!dev->dma_mask || !dma_supported(dev, dma_mask))
+		return -EIO;
+
+	*dev->dma_mask = dma_mask;
+	return 0;
+}
+
+/*
+ * dma_map_single can't fail as it is implemented now.
+ */
+static inline int dma_mapping_error(struct device *dev, dma_addr_t addr)
+{
+	return 0;
+}
+
+/**
+ * dma_alloc_coherent - allocate consistent memory for DMA
+ * @dev: valid struct device pointer, or NULL for ISA and EISA-like devices
+ * @size: required memory size
+ * @handle: bus-specific DMA address
+ *
+ * Allocate some uncached, unbuffered memory for a device for
+ * performing DMA.  This function allocates pages, and will
+ * return the CPU-viewed address, and sets @handle to be the
+ * device-viewed address.
+ */
+extern void *dma_alloc_coherent(struct device *dev, size_t size,
+				dma_addr_t *handle, gfp_t gfp);
+
+/**
+ * dma_free_coherent - free memory allocated by dma_alloc_coherent
+ * @dev: valid struct device pointer, or NULL for ISA and EISA-like devices
+ * @size: size of memory originally requested in dma_alloc_coherent
+ * @cpu_addr: CPU-view address returned from dma_alloc_coherent
+ * @handle: device-view address returned from dma_alloc_coherent
+ *
+ * Free (and unmap) a DMA buffer previously allocated by
+ * dma_alloc_coherent().
+ *
+ * References to memory and mappings associated with cpu_addr/handle
+ * during and after this call executing are illegal.
+ */
+extern void dma_free_coherent(struct device *dev, size_t size,
+			      void *cpu_addr, dma_addr_t handle);
+
+/**
+ * dma_alloc_writecombine - allocate write-combining memory for DMA
+ * @dev: valid struct device pointer, or NULL for ISA and EISA-like devices
+ * @size: required memory size
+ * @handle: bus-specific DMA address
+ *
+ * Allocate some uncached, buffered memory for a device for
+ * performing DMA.  This function allocates pages, and will
+ * return the CPU-viewed address, and sets @handle to be the
+ * device-viewed address.
+ */
+extern void *dma_alloc_writecombine(struct device *dev, size_t size,
+				    dma_addr_t *handle, gfp_t gfp);
+
+/**
+ * dma_free_coherent - free memory allocated by dma_alloc_writecombine
+ * @dev: valid struct device pointer, or NULL for ISA and EISA-like devices
+ * @size: size of memory originally requested in dma_alloc_writecombine
+ * @cpu_addr: CPU-view address returned from dma_alloc_writecombine
+ * @handle: device-view address returned from dma_alloc_writecombine
+ *
+ * Free (and unmap) a DMA buffer previously allocated by
+ * dma_alloc_writecombine().
+ *
+ * References to memory and mappings associated with cpu_addr/handle
+ * during and after this call executing are illegal.
+ */
+extern void dma_free_writecombine(struct device *dev, size_t size,
+				  void *cpu_addr, dma_addr_t handle);
+
+/**
+ * dma_map_single - map a single buffer for streaming DMA
+ * @dev: valid struct device pointer, or NULL for ISA and EISA-like devices
+ * @cpu_addr: CPU direct mapped address of buffer
+ * @size: size of buffer to map
+ * @dir: DMA transfer direction
+ *
+ * Ensure that any data held in the cache is appropriately discarded
+ * or written back.
+ *
+ * The device owns this memory once this call has completed.  The CPU
+ * can regain ownership by calling dma_unmap_single() or dma_sync_single().
+ */
+static inline dma_addr_t
+dma_map_single(struct device *dev, void *cpu_addr, size_t size,
+	       enum dma_data_direction direction)
+{
+	dma_cache_sync(dev, cpu_addr, size, direction);
+	return virt_to_bus(cpu_addr);
+}
+
+/**
+ * dma_unmap_single - unmap a single buffer previously mapped
+ * @dev: valid struct device pointer, or NULL for ISA and EISA-like devices
+ * @handle: DMA address of buffer
+ * @size: size of buffer to map
+ * @dir: DMA transfer direction
+ *
+ * Unmap a single streaming mode DMA translation.  The handle and size
+ * must match what was provided in the previous dma_map_single() call.
+ * All other usages are undefined.
+ *
+ * After this call, reads by the CPU to the buffer are guaranteed to see
+ * whatever the device wrote there.
+ */
+static inline void
+dma_unmap_single(struct device *dev, dma_addr_t dma_addr, size_t size,
+		 enum dma_data_direction direction)
+{
+
+}
+
+/**
+ * dma_map_page - map a portion of a page for streaming DMA
+ * @dev: valid struct device pointer, or NULL for ISA and EISA-like devices
+ * @page: page that buffer resides in
+ * @offset: offset into page for start of buffer
+ * @size: size of buffer to map
+ * @dir: DMA transfer direction
+ *
+ * Ensure that any data held in the cache is appropriately discarded
+ * or written back.
+ *
+ * The device owns this memory once this call has completed.  The CPU
+ * can regain ownership by calling dma_unmap_page() or dma_sync_single().
+ */
+static inline dma_addr_t
+dma_map_page(struct device *dev, struct page *page,
+	     unsigned long offset, size_t size,
+	     enum dma_data_direction direction)
+{
+	return dma_map_single(dev, page_address(page) + offset,
+			      size, direction);
+}
+
+/**
+ * dma_unmap_page - unmap a buffer previously mapped through dma_map_page()
+ * @dev: valid struct device pointer, or NULL for ISA and EISA-like devices
+ * @handle: DMA address of buffer
+ * @size: size of buffer to map
+ * @dir: DMA transfer direction
+ *
+ * Unmap a single streaming mode DMA translation.  The handle and size
+ * must match what was provided in the previous dma_map_single() call.
+ * All other usages are undefined.
+ *
+ * After this call, reads by the CPU to the buffer are guaranteed to see
+ * whatever the device wrote there.
+ */
+static inline void
+dma_unmap_page(struct device *dev, dma_addr_t dma_address, size_t size,
+	       enum dma_data_direction direction)
+{
+	dma_unmap_single(dev, dma_address, size, direction);
+}
+
+/**
+ * dma_map_sg - map a set of SG buffers for streaming mode DMA
+ * @dev: valid struct device pointer, or NULL for ISA and EISA-like devices
+ * @sg: list of buffers
+ * @nents: number of buffers to map
+ * @dir: DMA transfer direction
+ *
+ * Map a set of buffers described by scatterlist in streaming
+ * mode for DMA.  This is the scatter-gather version of the
+ * above pci_map_single interface.  Here the scatter gather list
+ * elements are each tagged with the appropriate dma address
+ * and length.  They are obtained via sg_dma_{address,length}(SG).
+ *
+ * NOTE: An implementation may be able to use a smaller number of
+ *       DMA address/length pairs than there are SG table elements.
+ *       (for example via virtual mapping capabilities)
+ *       The routine returns the number of addr/length pairs actually
+ *       used, at most nents.
+ *
+ * Device ownership issues as mentioned above for pci_map_single are
+ * the same here.
+ */
+static inline int
+dma_map_sg(struct device *dev, struct scatterlist *sg, int nents,
+	   enum dma_data_direction direction)
+{
+	int i;
+
+	for (i = 0; i < nents; i++) {
+		char *virt;
+
+		sg[i].dma_address = page_to_bus(sg_page(&sg[i])) + sg[i].offset;
+		virt = sg_virt(&sg[i]);
+		dma_cache_sync(dev, virt, sg[i].length, direction);
+	}
+
+	return nents;
+}
+
+/**
+ * dma_unmap_sg - unmap a set of SG buffers mapped by dma_map_sg
+ * @dev: valid struct device pointer, or NULL for ISA and EISA-like devices
+ * @sg: list of buffers
+ * @nents: number of buffers to map
+ * @dir: DMA transfer direction
+ *
+ * Unmap a set of streaming mode DMA translations.
+ * Again, CPU read rules concerning calls here are the same as for
+ * pci_unmap_single() above.
+ */
+static inline void
+dma_unmap_sg(struct device *dev, struct scatterlist *sg, int nhwentries,
+	     enum dma_data_direction direction)
+{
+
+}
+
+/**
+ * dma_sync_single_for_cpu
+ * @dev: valid struct device pointer, or NULL for ISA and EISA-like devices
+ * @handle: DMA address of buffer
+ * @size: size of buffer to map
+ * @dir: DMA transfer direction
+ *
+ * Make physical memory consistent for a single streaming mode DMA
+ * translation after a transfer.
+ *
+ * If you perform a dma_map_single() but wish to interrogate the
+ * buffer using the cpu, yet do not wish to teardown the DMA mapping,
+ * you must call this function before doing so.  At the next point you
+ * give the DMA address back to the card, you must first perform a
+ * dma_sync_single_for_device, and then the device again owns the
+ * buffer.
+ */
+static inline void
+dma_sync_single_for_cpu(struct device *dev, dma_addr_t dma_handle,
+			size_t size, enum dma_data_direction direction)
+{
+	/*
+	 * No need to do anything since the CPU isn't supposed to
+	 * touch this memory after we flushed it at mapping- or
+	 * sync-for-device time.
+	 */
+}
+
+static inline void
+dma_sync_single_for_device(struct device *dev, dma_addr_t dma_handle,
+			   size_t size, enum dma_data_direction direction)
+{
+	dma_cache_sync(dev, bus_to_virt(dma_handle), size, direction);
+}
+
+static inline void
+dma_sync_single_range_for_cpu(struct device *dev, dma_addr_t dma_handle,
+			      unsigned long offset, size_t size,
+			      enum dma_data_direction direction)
+{
+	/* just sync everything, that's all the pci API can do */
+	dma_sync_single_for_cpu(dev, dma_handle, offset+size, direction);
+}
+
+static inline void
+dma_sync_single_range_for_device(struct device *dev, dma_addr_t dma_handle,
+				 unsigned long offset, size_t size,
+				 enum dma_data_direction direction)
+{
+	/* just sync everything, that's all the pci API can do */
+	dma_sync_single_for_device(dev, dma_handle, offset+size, direction);
+}
+
+/**
+ * dma_sync_sg_for_cpu
+ * @dev: valid struct device pointer, or NULL for ISA and EISA-like devices
+ * @sg: list of buffers
+ * @nents: number of buffers to map
+ * @dir: DMA transfer direction
+ *
+ * Make physical memory consistent for a set of streaming
+ * mode DMA translations after a transfer.
+ *
+ * The same as dma_sync_single_for_* but for a scatter-gather list,
+ * same rules and usage.
+ */
+static inline void
+dma_sync_sg_for_cpu(struct device *dev, struct scatterlist *sg,
+		    int nents, enum dma_data_direction direction)
+{
+	/*
+	 * No need to do anything since the CPU isn't supposed to
+	 * touch this memory after we flushed it at mapping- or
+	 * sync-for-device time.
+	 */
+}
+
+static inline void
+dma_sync_sg_for_device(struct device *dev, struct scatterlist *sg,
+		       int nents, enum dma_data_direction direction)
+{
+	int i;
+
+	for (i = 0; i < nents; i++) {
+		dma_cache_sync(dev, sg_virt(&sg[i]), sg[i].length, direction);
+	}
+}
+
+/* Now for the API extensions over the pci_ one */
+
+#define dma_alloc_noncoherent(d, s, h, f) dma_alloc_coherent(d, s, h, f)
+#define dma_free_noncoherent(d, s, v, h) dma_free_coherent(d, s, v, h)
+
+static inline int dma_is_consistent(struct device *dev, dma_addr_t dma_addr)
+{
+	return 1;
+}
+
+static inline int dma_get_cache_alignment(void)
+{
+	return boot_cpu_data.dcache.linesz;
+}
+
+#endif /* __ASM_AVR32_DMA_MAPPING_H */
diff --git a/include/asm-avr32/dma.h b/arch/avr32/include/asm/dma.h
index 9e91205590ac..9e91205590ac 100644
--- a/include/asm-avr32/dma.h
+++ b/arch/avr32/include/asm/dma.h
diff --git a/include/asm-avr32/elf.h b/arch/avr32/include/asm/elf.h
index 64ce40ee1d58..64ce40ee1d58 100644
--- a/include/asm-avr32/elf.h
+++ b/arch/avr32/include/asm/elf.h
diff --git a/include/asm-avr32/emergency-restart.h b/arch/avr32/include/asm/emergency-restart.h
index 3e7e014776ba..3e7e014776ba 100644
--- a/include/asm-avr32/emergency-restart.h
+++ b/arch/avr32/include/asm/emergency-restart.h
diff --git a/include/asm-avr32/errno.h b/arch/avr32/include/asm/errno.h
index 558a7249f06d..558a7249f06d 100644
--- a/include/asm-avr32/errno.h
+++ b/arch/avr32/include/asm/errno.h
diff --git a/include/asm-avr32/fb.h b/arch/avr32/include/asm/fb.h
index 41baf84ad402..41baf84ad402 100644
--- a/include/asm-avr32/fb.h
+++ b/arch/avr32/include/asm/fb.h
diff --git a/include/asm-avr32/fcntl.h b/arch/avr32/include/asm/fcntl.h
index 14c0c4402b11..14c0c4402b11 100644
--- a/include/asm-avr32/fcntl.h
+++ b/arch/avr32/include/asm/fcntl.h
diff --git a/include/asm-avr32/futex.h b/arch/avr32/include/asm/futex.h
index 10419f14a68a..10419f14a68a 100644
--- a/include/asm-avr32/futex.h
+++ b/arch/avr32/include/asm/futex.h
diff --git a/arch/avr32/include/asm/gpio.h b/arch/avr32/include/asm/gpio.h
new file mode 100644
index 000000000000..b771f7105964
--- /dev/null
+++ b/arch/avr32/include/asm/gpio.h
@@ -0,0 +1,6 @@
+#ifndef __ASM_AVR32_GPIO_H
+#define __ASM_AVR32_GPIO_H
+
+#include <mach/gpio.h>
+
+#endif /* __ASM_AVR32_GPIO_H */
diff --git a/include/asm-avr32/hardirq.h b/arch/avr32/include/asm/hardirq.h
index 267354356f60..267354356f60 100644
--- a/include/asm-avr32/hardirq.h
+++ b/arch/avr32/include/asm/hardirq.h
diff --git a/include/asm-avr32/hw_irq.h b/arch/avr32/include/asm/hw_irq.h
index 218b0a6bfd1b..218b0a6bfd1b 100644
--- a/include/asm-avr32/hw_irq.h
+++ b/arch/avr32/include/asm/hw_irq.h
diff --git a/arch/avr32/include/asm/io.h b/arch/avr32/include/asm/io.h
new file mode 100644
index 000000000000..a520f77ead96
--- /dev/null
+++ b/arch/avr32/include/asm/io.h
@@ -0,0 +1,312 @@
+#ifndef __ASM_AVR32_IO_H
+#define __ASM_AVR32_IO_H
+
+#include <linux/kernel.h>
+#include <linux/string.h>
+#include <linux/types.h>
+
+#include <asm/addrspace.h>
+#include <asm/byteorder.h>
+
+#include <mach/io.h>
+
+/* virt_to_phys will only work when address is in P1 or P2 */
+static __inline__ unsigned long virt_to_phys(volatile void *address)
+{
+	return PHYSADDR(address);
+}
+
+static __inline__ void * phys_to_virt(unsigned long address)
+{
+	return (void *)P1SEGADDR(address);
+}
+
+#define cached_to_phys(addr)	((unsigned long)PHYSADDR(addr))
+#define uncached_to_phys(addr)	((unsigned long)PHYSADDR(addr))
+#define phys_to_cached(addr)	((void *)P1SEGADDR(addr))
+#define phys_to_uncached(addr)	((void *)P2SEGADDR(addr))
+
+/*
+ * Generic IO read/write.  These perform native-endian accesses.  Note
+ * that some architectures will want to re-define __raw_{read,write}w.
+ */
+extern void __raw_writesb(void __iomem *addr, const void *data, int bytelen);
+extern void __raw_writesw(void __iomem *addr, const void *data, int wordlen);
+extern void __raw_writesl(void __iomem *addr, const void *data, int longlen);
+
+extern void __raw_readsb(const void __iomem *addr, void *data, int bytelen);
+extern void __raw_readsw(const void __iomem *addr, void *data, int wordlen);
+extern void __raw_readsl(const void __iomem *addr, void *data, int longlen);
+
+static inline void __raw_writeb(u8 v, volatile void __iomem *addr)
+{
+	*(volatile u8 __force *)addr = v;
+}
+static inline void __raw_writew(u16 v, volatile void __iomem *addr)
+{
+	*(volatile u16 __force *)addr = v;
+}
+static inline void __raw_writel(u32 v, volatile void __iomem *addr)
+{
+	*(volatile u32 __force *)addr = v;
+}
+
+static inline u8 __raw_readb(const volatile void __iomem *addr)
+{
+	return *(const volatile u8 __force *)addr;
+}
+static inline u16 __raw_readw(const volatile void __iomem *addr)
+{
+	return *(const volatile u16 __force *)addr;
+}
+static inline u32 __raw_readl(const volatile void __iomem *addr)
+{
+	return *(const volatile u32 __force *)addr;
+}
+
+/* Convert I/O port address to virtual address */
+#ifndef __io
+# define __io(p)	((void *)phys_to_uncached(p))
+#endif
+
+/*
+ * Not really sure about the best way to slow down I/O on
+ * AVR32. Defining it as a no-op until we have an actual test case.
+ */
+#define SLOW_DOWN_IO	do { } while (0)
+
+#define __BUILD_MEMORY_SINGLE(pfx, bwl, type)				\
+static inline void							\
+pfx##write##bwl(type val, volatile void __iomem *addr)			\
+{									\
+	volatile type *__addr;						\
+	type __val;							\
+									\
+	__addr = (void *)__swizzle_addr_##bwl((unsigned long)(addr));	\
+	__val = pfx##ioswab##bwl(__addr, val);				\
+									\
+	BUILD_BUG_ON(sizeof(type) > sizeof(unsigned long));		\
+									\
+	*__addr = __val;						\
+}									\
+									\
+static inline type pfx##read##bwl(const volatile void __iomem *addr)	\
+{									\
+	volatile type *__addr;						\
+	type __val;							\
+									\
+	__addr = (void *)__swizzle_addr_##bwl((unsigned long)(addr));	\
+									\
+	BUILD_BUG_ON(sizeof(type) > sizeof(unsigned long));		\
+									\
+	__val = *__addr;						\
+	return pfx##ioswab##bwl(__addr, __val);				\
+}
+
+#define __BUILD_IOPORT_SINGLE(pfx, bwl, type, p, slow)			\
+static inline void pfx##out##bwl##p(type val, unsigned long port)	\
+{									\
+	volatile type *__addr;						\
+	type __val;							\
+									\
+	__addr = __io(__swizzle_addr_##bwl(port));			\
+	__val = pfx##ioswab##bwl(__addr, val);				\
+									\
+	BUILD_BUG_ON(sizeof(type) > sizeof(unsigned long));		\
+									\
+	*__addr = __val;						\
+	slow;								\
+}									\
+									\
+static inline type pfx##in##bwl##p(unsigned long port)			\
+{									\
+	volatile type *__addr;						\
+	type __val;							\
+									\
+	__addr = __io(__swizzle_addr_##bwl(port));			\
+									\
+	BUILD_BUG_ON(sizeof(type) > sizeof(unsigned long));		\
+									\
+	__val = *__addr;						\
+	slow;								\
+									\
+	return pfx##ioswab##bwl(__addr, __val);				\
+}
+
+#define __BUILD_MEMORY_PFX(bus, bwl, type)				\
+	__BUILD_MEMORY_SINGLE(bus, bwl, type)
+
+#define BUILDIO_MEM(bwl, type)						\
+	__BUILD_MEMORY_PFX(, bwl, type)					\
+	__BUILD_MEMORY_PFX(__mem_, bwl, type)
+
+#define __BUILD_IOPORT_PFX(bus, bwl, type)				\
+	__BUILD_IOPORT_SINGLE(bus, bwl, type, ,)			\
+	__BUILD_IOPORT_SINGLE(bus, bwl, type, _p, SLOW_DOWN_IO)
+
+#define BUILDIO_IOPORT(bwl, type)					\
+	__BUILD_IOPORT_PFX(, bwl, type)					\
+	__BUILD_IOPORT_PFX(__mem_, bwl, type)
+
+BUILDIO_MEM(b, u8)
+BUILDIO_MEM(w, u16)
+BUILDIO_MEM(l, u32)
+
+BUILDIO_IOPORT(b, u8)
+BUILDIO_IOPORT(w, u16)
+BUILDIO_IOPORT(l, u32)
+
+#define readb_relaxed			readb
+#define readw_relaxed			readw
+#define readl_relaxed			readl
+
+#define __BUILD_MEMORY_STRING(bwl, type)				\
+static inline void writes##bwl(volatile void __iomem *addr,		\
+			       const void *data, unsigned int count)	\
+{									\
+	const type *__data = data;					\
+									\
+	while (count--)							\
+		__mem_write##bwl(*__data++, addr);			\
+}									\
+									\
+static inline void reads##bwl(const volatile void __iomem *addr,	\
+			      void *data, unsigned int count)		\
+{									\
+	type *__data = data;						\
+									\
+	while (count--)							\
+		*__data++ = __mem_read##bwl(addr);			\
+}
+
+#define __BUILD_IOPORT_STRING(bwl, type)				\
+static inline void outs##bwl(unsigned long port, const void *data,	\
+			     unsigned int count)			\
+{									\
+	const type *__data = data;					\
+									\
+	while (count--)							\
+		__mem_out##bwl(*__data++, port);			\
+}									\
+									\
+static inline void ins##bwl(unsigned long port, void *data,		\
+			   unsigned int count)				\
+{									\
+	type *__data = data;						\
+									\
+	while (count--)							\
+		*__data++ = __mem_in##bwl(port);			\
+}
+
+#define BUILDSTRING(bwl, type)						\
+	__BUILD_MEMORY_STRING(bwl, type)				\
+	__BUILD_IOPORT_STRING(bwl, type)
+
+BUILDSTRING(b, u8)
+BUILDSTRING(w, u16)
+BUILDSTRING(l, u32)
+
+/*
+ * io{read,write}{8,16,32} macros in both le (for PCI style consumers) and native be
+ */
+#ifndef ioread8
+
+#define ioread8(p)		((unsigned int)readb(p))
+
+#define ioread16(p)		((unsigned int)readw(p))
+#define ioread16be(p)		((unsigned int)__raw_readw(p))
+
+#define ioread32(p)		((unsigned int)readl(p))
+#define ioread32be(p)		((unsigned int)__raw_readl(p))
+
+#define iowrite8(v,p)		writeb(v, p)
+
+#define iowrite16(v,p)		writew(v, p)
+#define iowrite16be(v,p)	__raw_writew(v, p)
+
+#define iowrite32(v,p)		writel(v, p)
+#define iowrite32be(v,p)	__raw_writel(v, p)
+
+#define ioread8_rep(p,d,c)	readsb(p,d,c)
+#define ioread16_rep(p,d,c)	readsw(p,d,c)
+#define ioread32_rep(p,d,c)	readsl(p,d,c)
+
+#define iowrite8_rep(p,s,c)	writesb(p,s,c)
+#define iowrite16_rep(p,s,c)	writesw(p,s,c)
+#define iowrite32_rep(p,s,c)	writesl(p,s,c)
+
+#endif
+
+static inline void memcpy_fromio(void * to, const volatile void __iomem *from,
+				 unsigned long count)
+{
+	memcpy(to, (const void __force *)from, count);
+}
+
+static inline void  memcpy_toio(volatile void __iomem *to, const void * from,
+				unsigned long count)
+{
+	memcpy((void __force *)to, from, count);
+}
+
+static inline void memset_io(volatile void __iomem *addr, unsigned char val,
+			     unsigned long count)
+{
+	memset((void __force *)addr, val, count);
+}
+
+#define mmiowb()
+
+#define IO_SPACE_LIMIT	0xffffffff
+
+extern void __iomem *__ioremap(unsigned long offset, size_t size,
+			       unsigned long flags);
+extern void __iounmap(void __iomem *addr);
+
+/*
+ * ioremap	-   map bus memory into CPU space
+ * @offset	bus address of the memory
+ * @size	size of the resource to map
+ *
+ * ioremap performs a platform specific sequence of operations to make
+ * bus memory CPU accessible via the readb/.../writel functions and
+ * the other mmio helpers. The returned address is not guaranteed to
+ * be usable directly as a virtual address.
+ */
+#define ioremap(offset, size)			\
+	__ioremap((offset), (size), 0)
+
+#define ioremap_nocache(offset, size)		\
+	__ioremap((offset), (size), 0)
+
+#define iounmap(addr)				\
+	__iounmap(addr)
+
+#define cached(addr) P1SEGADDR(addr)
+#define uncached(addr) P2SEGADDR(addr)
+
+#define virt_to_bus virt_to_phys
+#define bus_to_virt phys_to_virt
+#define page_to_bus page_to_phys
+#define bus_to_page phys_to_page
+
+/*
+ * Create a virtual mapping cookie for an IO port range.  There exists
+ * no such thing as port-based I/O on AVR32, so a regular ioremap()
+ * should do what we need.
+ */
+#define ioport_map(port, nr)	ioremap(port, nr)
+#define ioport_unmap(port)	iounmap(port)
+
+/*
+ * Convert a physical pointer to a virtual kernel pointer for /dev/mem
+ * access
+ */
+#define xlate_dev_mem_ptr(p)    __va(p)
+
+/*
+ * Convert a virtual cached pointer to an uncached pointer
+ */
+#define xlate_dev_kmem_ptr(p)   p
+
+#endif /* __ASM_AVR32_IO_H */
diff --git a/include/asm-avr32/ioctl.h b/arch/avr32/include/asm/ioctl.h
index c8472c1398ef..c8472c1398ef 100644
--- a/include/asm-avr32/ioctl.h
+++ b/arch/avr32/include/asm/ioctl.h
diff --git a/include/asm-avr32/ioctls.h b/arch/avr32/include/asm/ioctls.h
index 0cf2c0a4502b..0cf2c0a4502b 100644
--- a/include/asm-avr32/ioctls.h
+++ b/arch/avr32/include/asm/ioctls.h
diff --git a/include/asm-avr32/ipcbuf.h b/arch/avr32/include/asm/ipcbuf.h
index 1552c9698f5e..1552c9698f5e 100644
--- a/include/asm-avr32/ipcbuf.h
+++ b/arch/avr32/include/asm/ipcbuf.h
diff --git a/arch/avr32/include/asm/irq.h b/arch/avr32/include/asm/irq.h
new file mode 100644
index 000000000000..6fa8913f8548
--- /dev/null
+++ b/arch/avr32/include/asm/irq.h
@@ -0,0 +1,24 @@
+#ifndef __ASM_AVR32_IRQ_H
+#define __ASM_AVR32_IRQ_H
+
+#define NR_INTERNAL_IRQS	64
+
+#include <mach/irq.h>
+
+#ifndef NR_IRQS
+#define NR_IRQS			(NR_INTERNAL_IRQS)
+#endif
+
+#define irq_canonicalize(i)	(i)
+
+#ifndef __ASSEMBLER__
+int nmi_enable(void);
+void nmi_disable(void);
+
+/*
+ * Returns a bitmask of pending interrupts in a group.
+ */
+extern unsigned long intc_get_pending(unsigned int group);
+#endif
+
+#endif /* __ASM_AVR32_IOCTLS_H */
diff --git a/include/asm-avr32/irq_regs.h b/arch/avr32/include/asm/irq_regs.h
index 3dd9c0b70270..3dd9c0b70270 100644
--- a/include/asm-avr32/irq_regs.h
+++ b/arch/avr32/include/asm/irq_regs.h
diff --git a/include/asm-avr32/irqflags.h b/arch/avr32/include/asm/irqflags.h
index 93570daac38a..93570daac38a 100644
--- a/include/asm-avr32/irqflags.h
+++ b/arch/avr32/include/asm/irqflags.h
diff --git a/include/asm-avr32/kdebug.h b/arch/avr32/include/asm/kdebug.h
index ca4f9542365a..ca4f9542365a 100644
--- a/include/asm-avr32/kdebug.h
+++ b/arch/avr32/include/asm/kdebug.h
diff --git a/include/asm-avr32/kmap_types.h b/arch/avr32/include/asm/kmap_types.h
index b7f5c6870107..b7f5c6870107 100644
--- a/include/asm-avr32/kmap_types.h
+++ b/arch/avr32/include/asm/kmap_types.h
diff --git a/include/asm-avr32/kprobes.h b/arch/avr32/include/asm/kprobes.h
index 996cb656474e..996cb656474e 100644
--- a/include/asm-avr32/kprobes.h
+++ b/arch/avr32/include/asm/kprobes.h
diff --git a/include/asm-avr32/linkage.h b/arch/avr32/include/asm/linkage.h
index f7b285e910d4..f7b285e910d4 100644
--- a/include/asm-avr32/linkage.h
+++ b/arch/avr32/include/asm/linkage.h
diff --git a/include/asm-avr32/local.h b/arch/avr32/include/asm/local.h
index 1c1619694da3..1c1619694da3 100644
--- a/include/asm-avr32/local.h
+++ b/arch/avr32/include/asm/local.h
diff --git a/include/asm-arm/mach/serial_at91.h b/arch/avr32/include/asm/mach/serial_at91.h
index 55b317a89061..55b317a89061 100644
--- a/include/asm-arm/mach/serial_at91.h
+++ b/arch/avr32/include/asm/mach/serial_at91.h
diff --git a/include/asm-avr32/mman.h b/arch/avr32/include/asm/mman.h
index 648f91e7187a..648f91e7187a 100644
--- a/include/asm-avr32/mman.h
+++ b/arch/avr32/include/asm/mman.h
diff --git a/include/asm-avr32/mmu.h b/arch/avr32/include/asm/mmu.h
index 60c2d2650d32..60c2d2650d32 100644
--- a/include/asm-avr32/mmu.h
+++ b/arch/avr32/include/asm/mmu.h
diff --git a/include/asm-avr32/mmu_context.h b/arch/avr32/include/asm/mmu_context.h
index 27ff23407100..27ff23407100 100644
--- a/include/asm-avr32/mmu_context.h
+++ b/arch/avr32/include/asm/mmu_context.h
diff --git a/include/asm-avr32/module.h b/arch/avr32/include/asm/module.h
index 451444538a1b..451444538a1b 100644
--- a/include/asm-avr32/module.h
+++ b/arch/avr32/include/asm/module.h
diff --git a/include/asm-avr32/msgbuf.h b/arch/avr32/include/asm/msgbuf.h
index ac18bc4da7f7..ac18bc4da7f7 100644
--- a/include/asm-avr32/msgbuf.h
+++ b/arch/avr32/include/asm/msgbuf.h
diff --git a/include/asm-avr32/mutex.h b/arch/avr32/include/asm/mutex.h
index 458c1f7fbc18..458c1f7fbc18 100644
--- a/include/asm-avr32/mutex.h
+++ b/arch/avr32/include/asm/mutex.h
diff --git a/include/asm-avr32/numnodes.h b/arch/avr32/include/asm/numnodes.h
index 0b864d7ce330..0b864d7ce330 100644
--- a/include/asm-avr32/numnodes.h
+++ b/arch/avr32/include/asm/numnodes.h
diff --git a/include/asm-avr32/ocd.h b/arch/avr32/include/asm/ocd.h
index 6bef09490235..6bef09490235 100644
--- a/include/asm-avr32/ocd.h
+++ b/arch/avr32/include/asm/ocd.h
diff --git a/include/asm-avr32/page.h b/arch/avr32/include/asm/page.h
index f805d1cb11bc..f805d1cb11bc 100644
--- a/include/asm-avr32/page.h
+++ b/arch/avr32/include/asm/page.h
diff --git a/include/asm-avr32/param.h b/arch/avr32/include/asm/param.h
index 34bc8d4c3b29..34bc8d4c3b29 100644
--- a/include/asm-avr32/param.h
+++ b/arch/avr32/include/asm/param.h
diff --git a/include/asm-avr32/pci.h b/arch/avr32/include/asm/pci.h
index a32a02372017..a32a02372017 100644
--- a/include/asm-avr32/pci.h
+++ b/arch/avr32/include/asm/pci.h
diff --git a/include/asm-avr32/percpu.h b/arch/avr32/include/asm/percpu.h
index 69227b4cd0d4..69227b4cd0d4 100644
--- a/include/asm-avr32/percpu.h
+++ b/arch/avr32/include/asm/percpu.h
diff --git a/include/asm-avr32/pgalloc.h b/arch/avr32/include/asm/pgalloc.h
index 640821323943..640821323943 100644
--- a/include/asm-avr32/pgalloc.h
+++ b/arch/avr32/include/asm/pgalloc.h
diff --git a/include/asm-avr32/pgtable-2level.h b/arch/avr32/include/asm/pgtable-2level.h
index 425dd567b5b9..425dd567b5b9 100644
--- a/include/asm-avr32/pgtable-2level.h
+++ b/arch/avr32/include/asm/pgtable-2level.h
diff --git a/include/asm-avr32/pgtable.h b/arch/avr32/include/asm/pgtable.h
index fecdda16f444..fecdda16f444 100644
--- a/include/asm-avr32/pgtable.h
+++ b/arch/avr32/include/asm/pgtable.h
diff --git a/include/asm-avr32/poll.h b/arch/avr32/include/asm/poll.h
index c98509d3149e..c98509d3149e 100644
--- a/include/asm-avr32/poll.h
+++ b/arch/avr32/include/asm/poll.h
diff --git a/include/asm-avr32/posix_types.h b/arch/avr32/include/asm/posix_types.h
index fe0c0c014389..fe0c0c014389 100644
--- a/include/asm-avr32/posix_types.h
+++ b/arch/avr32/include/asm/posix_types.h
diff --git a/include/asm-avr32/processor.h b/arch/avr32/include/asm/processor.h
index 49a88f5a9d2f..49a88f5a9d2f 100644
--- a/include/asm-avr32/processor.h
+++ b/arch/avr32/include/asm/processor.h
diff --git a/include/asm-avr32/ptrace.h b/arch/avr32/include/asm/ptrace.h
index 9e2d44f4e0fe..9e2d44f4e0fe 100644
--- a/include/asm-avr32/ptrace.h
+++ b/arch/avr32/include/asm/ptrace.h
diff --git a/include/asm-avr32/resource.h b/arch/avr32/include/asm/resource.h
index c6dd101472b1..c6dd101472b1 100644
--- a/include/asm-avr32/resource.h
+++ b/arch/avr32/include/asm/resource.h
diff --git a/include/asm-avr32/scatterlist.h b/arch/avr32/include/asm/scatterlist.h
index 377320e3bd17..377320e3bd17 100644
--- a/include/asm-avr32/scatterlist.h
+++ b/arch/avr32/include/asm/scatterlist.h
diff --git a/include/asm-avr32/sections.h b/arch/avr32/include/asm/sections.h
index aa14252e4181..aa14252e4181 100644
--- a/include/asm-avr32/sections.h
+++ b/arch/avr32/include/asm/sections.h
diff --git a/include/asm-avr32/sembuf.h b/arch/avr32/include/asm/sembuf.h
index e472216e0c97..e472216e0c97 100644
--- a/include/asm-avr32/sembuf.h
+++ b/arch/avr32/include/asm/sembuf.h
diff --git a/include/asm-avr32/serial.h b/arch/avr32/include/asm/serial.h
index 5ecaebc22b02..5ecaebc22b02 100644
--- a/include/asm-avr32/serial.h
+++ b/arch/avr32/include/asm/serial.h
diff --git a/include/asm-avr32/setup.h b/arch/avr32/include/asm/setup.h
index ff5b7cf6be4d..ff5b7cf6be4d 100644
--- a/include/asm-avr32/setup.h
+++ b/arch/avr32/include/asm/setup.h
diff --git a/include/asm-avr32/shmbuf.h b/arch/avr32/include/asm/shmbuf.h
index c62fba41739a..c62fba41739a 100644
--- a/include/asm-avr32/shmbuf.h
+++ b/arch/avr32/include/asm/shmbuf.h
diff --git a/include/asm-avr32/shmparam.h b/arch/avr32/include/asm/shmparam.h
index 3681266c77f7..3681266c77f7 100644
--- a/include/asm-avr32/shmparam.h
+++ b/arch/avr32/include/asm/shmparam.h
diff --git a/include/asm-avr32/sigcontext.h b/arch/avr32/include/asm/sigcontext.h
index e04062b5f39f..e04062b5f39f 100644
--- a/include/asm-avr32/sigcontext.h
+++ b/arch/avr32/include/asm/sigcontext.h
diff --git a/include/asm-avr32/siginfo.h b/arch/avr32/include/asm/siginfo.h
index 5ee93f40a8a8..5ee93f40a8a8 100644
--- a/include/asm-avr32/siginfo.h
+++ b/arch/avr32/include/asm/siginfo.h
diff --git a/include/asm-avr32/signal.h b/arch/avr32/include/asm/signal.h
index caffefeeba1f..caffefeeba1f 100644
--- a/include/asm-avr32/signal.h
+++ b/arch/avr32/include/asm/signal.h
diff --git a/include/asm-avr32/socket.h b/arch/avr32/include/asm/socket.h
index 35863f260929..35863f260929 100644
--- a/include/asm-avr32/socket.h
+++ b/arch/avr32/include/asm/socket.h
diff --git a/include/asm-avr32/sockios.h b/arch/avr32/include/asm/sockios.h
index 0802d742f97d..0802d742f97d 100644
--- a/include/asm-avr32/sockios.h
+++ b/arch/avr32/include/asm/sockios.h
diff --git a/include/asm-avr32/stat.h b/arch/avr32/include/asm/stat.h
index e72881e10230..e72881e10230 100644
--- a/include/asm-avr32/stat.h
+++ b/arch/avr32/include/asm/stat.h
diff --git a/include/asm-avr32/statfs.h b/arch/avr32/include/asm/statfs.h
index 2961bd18c50e..2961bd18c50e 100644
--- a/include/asm-avr32/statfs.h
+++ b/arch/avr32/include/asm/statfs.h
diff --git a/include/asm-avr32/string.h b/arch/avr32/include/asm/string.h
index c91a623cd585..c91a623cd585 100644
--- a/include/asm-avr32/string.h
+++ b/arch/avr32/include/asm/string.h
diff --git a/include/asm-avr32/sysreg.h b/arch/avr32/include/asm/sysreg.h
index d4e0950170ca..d4e0950170ca 100644
--- a/include/asm-avr32/sysreg.h
+++ b/arch/avr32/include/asm/sysreg.h
diff --git a/include/asm-avr32/system.h b/arch/avr32/include/asm/system.h
index 9702c2213e1e..9702c2213e1e 100644
--- a/include/asm-avr32/system.h
+++ b/arch/avr32/include/asm/system.h
diff --git a/include/asm-avr32/termbits.h b/arch/avr32/include/asm/termbits.h
index db2daab31fdb..db2daab31fdb 100644
--- a/include/asm-avr32/termbits.h
+++ b/arch/avr32/include/asm/termbits.h
diff --git a/include/asm-avr32/termios.h b/arch/avr32/include/asm/termios.h
index 0152aba35154..0152aba35154 100644
--- a/include/asm-avr32/termios.h
+++ b/arch/avr32/include/asm/termios.h
diff --git a/arch/avr32/include/asm/thread_info.h b/arch/avr32/include/asm/thread_info.h
new file mode 100644
index 000000000000..294b25f9323d
--- /dev/null
+++ b/arch/avr32/include/asm/thread_info.h
@@ -0,0 +1,115 @@
+/*
+ * Copyright (C) 2004-2006 Atmel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __ASM_AVR32_THREAD_INFO_H
+#define __ASM_AVR32_THREAD_INFO_H
+
+#include <asm/page.h>
+
+#define THREAD_SIZE_ORDER	1
+#define THREAD_SIZE		(PAGE_SIZE << THREAD_SIZE_ORDER)
+
+#ifndef __ASSEMBLY__
+#include <asm/types.h>
+
+struct task_struct;
+struct exec_domain;
+
+struct thread_info {
+	struct task_struct	*task;		/* main task structure */
+	struct exec_domain	*exec_domain;	/* execution domain */
+	unsigned long		flags;		/* low level flags */
+	__u32			cpu;
+	__s32			preempt_count;	/* 0 => preemptable, <0 => BUG */
+	__u32			rar_saved;	/* return address... */
+	__u32			rsr_saved;	/* ...and status register
+						   saved by debug handler
+						   when setting up
+						   trampoline */
+	struct restart_block	restart_block;
+	__u8			supervisor_stack[0];
+};
+
+#define INIT_THREAD_INFO(tsk)						\
+{									\
+	.task		= &tsk,						\
+	.exec_domain	= &default_exec_domain,				\
+	.flags		= 0,						\
+	.cpu		= 0,						\
+	.preempt_count	= 1,						\
+	.restart_block	= {						\
+		.fn	= do_no_restart_syscall				\
+	}								\
+}
+
+#define init_thread_info	(init_thread_union.thread_info)
+#define init_stack		(init_thread_union.stack)
+
+/*
+ * Get the thread information struct from C.
+ * We do the usual trick and use the lower end of the stack for this
+ */
+static inline struct thread_info *current_thread_info(void)
+{
+	unsigned long addr = ~(THREAD_SIZE - 1);
+
+	asm("and %0, sp" : "=r"(addr) : "0"(addr));
+	return (struct thread_info *)addr;
+}
+
+#define get_thread_info(ti) get_task_struct((ti)->task)
+#define put_thread_info(ti) put_task_struct((ti)->task)
+
+#endif /* !__ASSEMBLY__ */
+
+#define PREEMPT_ACTIVE		0x40000000
+
+/*
+ * Thread information flags
+ * - these are process state flags that various assembly files may need to access
+ * - pending work-to-be-done flags are in LSW
+ * - other flags in MSW
+ */
+#define TIF_SYSCALL_TRACE       0       /* syscall trace active */
+#define TIF_SIGPENDING          1       /* signal pending */
+#define TIF_NEED_RESCHED        2       /* rescheduling necessary */
+#define TIF_POLLING_NRFLAG      3       /* true if poll_idle() is polling
+					   TIF_NEED_RESCHED */
+#define TIF_BREAKPOINT		4	/* enter monitor mode on return */
+#define TIF_SINGLE_STEP		5	/* single step in progress */
+#define TIF_MEMDIE		6
+#define TIF_RESTORE_SIGMASK	7	/* restore signal mask in do_signal */
+#define TIF_CPU_GOING_TO_SLEEP	8	/* CPU is entering sleep 0 mode */
+#define TIF_FREEZE		29
+#define TIF_DEBUG		30	/* debugging enabled */
+#define TIF_USERSPACE		31      /* true if FS sets userspace */
+
+#define _TIF_SYSCALL_TRACE	(1 << TIF_SYSCALL_TRACE)
+#define _TIF_SIGPENDING		(1 << TIF_SIGPENDING)
+#define _TIF_NEED_RESCHED	(1 << TIF_NEED_RESCHED)
+#define _TIF_POLLING_NRFLAG	(1 << TIF_POLLING_NRFLAG)
+#define _TIF_SINGLE_STEP	(1 << TIF_SINGLE_STEP)
+#define _TIF_MEMDIE		(1 << TIF_MEMDIE)
+#define _TIF_RESTORE_SIGMASK	(1 << TIF_RESTORE_SIGMASK)
+#define _TIF_CPU_GOING_TO_SLEEP (1 << TIF_CPU_GOING_TO_SLEEP)
+
+/* Note: The masks below must never span more than 16 bits! */
+
+/* work to do on interrupt/exception return */
+#define _TIF_WORK_MASK				\
+	((1 << TIF_SIGPENDING)			\
+	 | (1 << TIF_NEED_RESCHED)		\
+	 | (1 << TIF_POLLING_NRFLAG)		\
+	 | (1 << TIF_BREAKPOINT)		\
+	 | (1 << TIF_RESTORE_SIGMASK))
+
+/* work to do on any return to userspace */
+#define _TIF_ALLWORK_MASK	(_TIF_WORK_MASK | (1 << TIF_SYSCALL_TRACE))
+/* work to do on return from debug mode */
+#define _TIF_DBGWORK_MASK	(_TIF_WORK_MASK & ~(1 << TIF_BREAKPOINT))
+
+#endif /* __ASM_AVR32_THREAD_INFO_H */
diff --git a/include/asm-avr32/timex.h b/arch/avr32/include/asm/timex.h
index 187dcf38b210..187dcf38b210 100644
--- a/include/asm-avr32/timex.h
+++ b/arch/avr32/include/asm/timex.h
diff --git a/include/asm-avr32/tlb.h b/arch/avr32/include/asm/tlb.h
index 5c55f9ce7c7d..5c55f9ce7c7d 100644
--- a/include/asm-avr32/tlb.h
+++ b/arch/avr32/include/asm/tlb.h
diff --git a/include/asm-avr32/tlbflush.h b/arch/avr32/include/asm/tlbflush.h
index bf90a786f6be..bf90a786f6be 100644
--- a/include/asm-avr32/tlbflush.h
+++ b/arch/avr32/include/asm/tlbflush.h
diff --git a/include/asm-avr32/topology.h b/arch/avr32/include/asm/topology.h
index 5b766cbb4806..5b766cbb4806 100644
--- a/include/asm-avr32/topology.h
+++ b/arch/avr32/include/asm/topology.h
diff --git a/include/asm-avr32/traps.h b/arch/avr32/include/asm/traps.h
index 6a8fb944f414..6a8fb944f414 100644
--- a/include/asm-avr32/traps.h
+++ b/arch/avr32/include/asm/traps.h
diff --git a/include/asm-avr32/types.h b/arch/avr32/include/asm/types.h
index 9cefda6f534a..9cefda6f534a 100644
--- a/include/asm-avr32/types.h
+++ b/arch/avr32/include/asm/types.h
diff --git a/include/asm-avr32/uaccess.h b/arch/avr32/include/asm/uaccess.h
index ed092395215e..ed092395215e 100644
--- a/include/asm-avr32/uaccess.h
+++ b/arch/avr32/include/asm/uaccess.h
diff --git a/include/asm-avr32/ucontext.h b/arch/avr32/include/asm/ucontext.h
index ac7259c2a799..ac7259c2a799 100644
--- a/include/asm-avr32/ucontext.h
+++ b/arch/avr32/include/asm/ucontext.h
diff --git a/include/asm-avr32/unaligned.h b/arch/avr32/include/asm/unaligned.h
index 041877290470..041877290470 100644
--- a/include/asm-avr32/unaligned.h
+++ b/arch/avr32/include/asm/unaligned.h
diff --git a/include/asm-avr32/unistd.h b/arch/avr32/include/asm/unistd.h
index 89861a27543e..89861a27543e 100644
--- a/include/asm-avr32/unistd.h
+++ b/arch/avr32/include/asm/unistd.h
diff --git a/include/asm-avr32/user.h b/arch/avr32/include/asm/user.h
index 7e9152f81f5e..7e9152f81f5e 100644
--- a/include/asm-avr32/user.h
+++ b/arch/avr32/include/asm/user.h
diff --git a/include/asm-avr32/xor.h b/arch/avr32/include/asm/xor.h
index 99c87aa0af4f..99c87aa0af4f 100644
--- a/include/asm-avr32/xor.h
+++ b/arch/avr32/include/asm/xor.h
diff --git a/arch/avr32/kernel/process.c b/arch/avr32/kernel/process.c
index ff820a9e743a..2c08ac992ac3 100644
--- a/arch/avr32/kernel/process.c
+++ b/arch/avr32/kernel/process.c
@@ -18,7 +18,7 @@
 #include <asm/sysreg.h>
 #include <asm/ocd.h>
 
-#include <asm/arch/pm.h>
+#include <mach/pm.h>
 
 void (*pm_power_off)(void) = NULL;
 EXPORT_SYMBOL(pm_power_off);
diff --git a/arch/avr32/kernel/setup.c b/arch/avr32/kernel/setup.c
index ce48c14f4349..d8e623c426c1 100644
--- a/arch/avr32/kernel/setup.c
+++ b/arch/avr32/kernel/setup.c
@@ -26,8 +26,8 @@
 #include <asm/setup.h>
 #include <asm/sysreg.h>
 
-#include <asm/arch/board.h>
-#include <asm/arch/init.h>
+#include <mach/board.h>
+#include <mach/init.h>
 
 extern int root_mountflags;
 
diff --git a/arch/avr32/kernel/time.c b/arch/avr32/kernel/time.c
index abd954fb7ba0..283481d74a5b 100644
--- a/arch/avr32/kernel/time.c
+++ b/arch/avr32/kernel/time.c
@@ -15,7 +15,7 @@
 
 #include <asm/sysreg.h>
 
-#include <asm/arch/pm.h>
+#include <mach/pm.h>
 
 
 static cycle_t read_cycle_count(void)
@@ -43,6 +43,9 @@ static irqreturn_t timer_interrupt(int irq, void *dev_id)
 {
 	struct clock_event_device *evdev = dev_id;
 
+	if (unlikely(!(intc_get_pending(0) & 1)))
+		return IRQ_NONE;
+
 	/*
 	 * Disable the interrupt until the clockevent subsystem
 	 * reprograms it.
@@ -55,7 +58,8 @@ static irqreturn_t timer_interrupt(int irq, void *dev_id)
 
 static struct irqaction timer_irqaction = {
 	.handler	= timer_interrupt,
-	.flags		= IRQF_TIMER | IRQF_DISABLED,
+	/* Oprofile uses the same irq as the timer, so allow it to be shared */
+	.flags		= IRQF_TIMER | IRQF_DISABLED | IRQF_SHARED,
 	.name		= "avr32_comparator",
 };
 
diff --git a/arch/avr32/mach-at32ap/Makefile b/arch/avr32/mach-at32ap/Makefile
index d5018e2eed25..514c9a9b009a 100644
--- a/arch/avr32/mach-at32ap/Makefile
+++ b/arch/avr32/mach-at32ap/Makefile
@@ -1,4 +1,5 @@
 obj-y				+= pdc.o clock.o intc.o extint.o pio.o hsmc.o
+obj-y				+= hmatrix.o
 obj-$(CONFIG_CPU_AT32AP700X)	+= at32ap700x.o pm-at32ap700x.o
 obj-$(CONFIG_CPU_FREQ_AT32AP)	+= cpufreq.o
 obj-$(CONFIG_PM)		+= pm.o
diff --git a/arch/avr32/mach-at32ap/at32ap700x.c b/arch/avr32/mach-at32ap/at32ap700x.c
index 604f44f5dd16..e01dbe4ebb40 100644
--- a/arch/avr32/mach-at32ap/at32ap700x.c
+++ b/arch/avr32/mach-at32ap/at32ap700x.c
@@ -12,6 +12,7 @@
 #include <linux/init.h>
 #include <linux/platform_device.h>
 #include <linux/dma-mapping.h>
+#include <linux/gpio.h>
 #include <linux/spi/spi.h>
 #include <linux/usb/atmel_usba_udc.h>
 
@@ -19,15 +20,15 @@
 #include <asm/io.h>
 #include <asm/irq.h>
 
-#include <asm/arch/at32ap700x.h>
-#include <asm/arch/board.h>
-#include <asm/arch/portmux.h>
-#include <asm/arch/sram.h>
+#include <mach/at32ap700x.h>
+#include <mach/board.h>
+#include <mach/hmatrix.h>
+#include <mach/portmux.h>
+#include <mach/sram.h>
 
 #include <video/atmel_lcdc.h>
 
 #include "clock.h"
-#include "hmatrix.h"
 #include "pio.h"
 #include "pm.h"
 
@@ -724,7 +725,7 @@ static struct clk pico_clk = {
  * HMATRIX
  * -------------------------------------------------------------------- */
 
-static struct clk hmatrix_clk = {
+struct clk at32_hmatrix_clk = {
 	.name		= "hmatrix_clk",
 	.parent		= &pbb_clk,
 	.mode		= pbb_clk_mode,
@@ -732,12 +733,6 @@ static struct clk hmatrix_clk = {
 	.index		= 2,
 	.users		= 1,
 };
-#define HMATRIX_BASE	((void __iomem *)0xfff00800)
-
-#define hmatrix_readl(reg)					\
-	__raw_readl((HMATRIX_BASE) + HMATRIX_##reg)
-#define hmatrix_writel(reg,value)				\
-	__raw_writel((value), (HMATRIX_BASE) + HMATRIX_##reg)
 
 /*
  * Set bits in the HMATRIX Special Function Register (SFR) used by the
@@ -747,13 +742,7 @@ static struct clk hmatrix_clk = {
  */
 static inline void set_ebi_sfr_bits(u32 mask)
 {
-	u32 sfr;
-
-	clk_enable(&hmatrix_clk);
-	sfr = hmatrix_readl(SFR4);
-	sfr |= mask;
-	hmatrix_writel(SFR4, sfr);
-	clk_disable(&hmatrix_clk);
+	hmatrix_sfr_set_bits(HMATRIX_SLAVE_EBI, mask);
 }
 
 /* --------------------------------------------------------------------
@@ -1285,7 +1274,6 @@ at32_add_device_mci(unsigned int id, struct mci_platform_data *data)
 {
 	struct mci_platform_data	_data;
 	struct platform_device		*pdev;
-	struct dw_dma_slave		*dws;
 
 	if (id != 0)
 		return NULL;
@@ -1300,7 +1288,9 @@ at32_add_device_mci(unsigned int id, struct mci_platform_data *data)
 
 	if (!data) {
 		data = &_data;
-		memset(data, 0, sizeof(struct mci_platform_data));
+		memset(data, -1, sizeof(struct mci_platform_data));
+		data->detect_pin = GPIO_PIN_NONE;
+		data->wp_pin = GPIO_PIN_NONE;
 	}
 
 	if (platform_device_add_data(pdev, data,
@@ -1314,12 +1304,10 @@ at32_add_device_mci(unsigned int id, struct mci_platform_data *data)
 	select_peripheral(PA(14), PERIPH_A, 0);	/* DATA2 */
 	select_peripheral(PA(15), PERIPH_A, 0);	/* DATA3 */
 
-	if (data) {
-		if (data->detect_pin != GPIO_PIN_NONE)
-			at32_select_gpio(data->detect_pin, 0);
-		if (data->wp_pin != GPIO_PIN_NONE)
-			at32_select_gpio(data->wp_pin, 0);
-	}
+	if (gpio_is_valid(data->detect_pin))
+		at32_select_gpio(data->detect_pin, 0);
+	if (gpio_is_valid(data->wp_pin))
+		at32_select_gpio(data->wp_pin, 0);
 
 	atmel_mci0_pclk.dev = &pdev->dev;
 
@@ -1779,7 +1767,7 @@ static int __init at32_init_ide_or_cf(struct platform_device *pdev,
 			return ret;
 
 		select_peripheral(PE(21), PERIPH_A, 0); /* NCS4   -> OE_N  */
-		set_ebi_sfr_bits(HMATRIX_BIT(CS4A));
+		hmatrix_sfr_set_bits(HMATRIX_SLAVE_EBI, HMATRIX_EBI_CF0_ENABLE);
 		break;
 	case 5:
 		ret = platform_device_add_resources(pdev,
@@ -1789,7 +1777,7 @@ static int __init at32_init_ide_or_cf(struct platform_device *pdev,
 			return ret;
 
 		select_peripheral(PE(22), PERIPH_A, 0); /* NCS5   -> OE_N  */
-		set_ebi_sfr_bits(HMATRIX_BIT(CS5A));
+		hmatrix_sfr_set_bits(HMATRIX_SLAVE_EBI, HMATRIX_EBI_CF1_ENABLE);
 		break;
 	default:
 		return -EINVAL;
@@ -1853,11 +1841,11 @@ at32_add_device_cf(unsigned int id, unsigned int extint,
 	if (at32_init_ide_or_cf(pdev, data->cs, extint))
 		goto fail;
 
-	if (data->detect_pin != GPIO_PIN_NONE)
+	if (gpio_is_valid(data->detect_pin))
 		at32_select_gpio(data->detect_pin, AT32_GPIOF_DEGLITCH);
-	if (data->reset_pin != GPIO_PIN_NONE)
+	if (gpio_is_valid(data->reset_pin))
 		at32_select_gpio(data->reset_pin, 0);
-	if (data->vcc_pin != GPIO_PIN_NONE)
+	if (gpio_is_valid(data->vcc_pin))
 		at32_select_gpio(data->vcc_pin, 0);
 	/* READY is used as extint, so we can't select it as gpio */
 
@@ -1871,6 +1859,58 @@ fail:
 #endif
 
 /* --------------------------------------------------------------------
+ * NAND Flash / SmartMedia
+ * -------------------------------------------------------------------- */
+static struct resource smc_cs3_resource[] __initdata = {
+	{
+		.start	= 0x0c000000,
+		.end	= 0x0fffffff,
+		.flags	= IORESOURCE_MEM,
+	}, {
+		.start	= 0xfff03c00,
+		.end	= 0xfff03fff,
+		.flags	= IORESOURCE_MEM,
+	},
+};
+
+struct platform_device *__init
+at32_add_device_nand(unsigned int id, struct atmel_nand_data *data)
+{
+	struct platform_device *pdev;
+
+	if (id != 0 || !data)
+		return NULL;
+
+	pdev = platform_device_alloc("atmel_nand", id);
+	if (!pdev)
+		goto fail;
+
+	if (platform_device_add_resources(pdev, smc_cs3_resource,
+				ARRAY_SIZE(smc_cs3_resource)))
+		goto fail;
+
+	if (platform_device_add_data(pdev, data,
+				sizeof(struct atmel_nand_data)))
+		goto fail;
+
+	hmatrix_sfr_set_bits(HMATRIX_SLAVE_EBI, HMATRIX_EBI_NAND_ENABLE);
+	if (data->enable_pin)
+		at32_select_gpio(data->enable_pin,
+				AT32_GPIOF_OUTPUT | AT32_GPIOF_HIGH);
+	if (data->rdy_pin)
+		at32_select_gpio(data->rdy_pin, 0);
+	if (data->det_pin)
+		at32_select_gpio(data->det_pin, 0);
+
+	platform_device_add(pdev);
+	return pdev;
+
+fail:
+	platform_device_put(pdev);
+	return NULL;
+}
+
+/* --------------------------------------------------------------------
  * AC97C
  * -------------------------------------------------------------------- */
 static struct resource atmel_ac97c0_resource[] __initdata = {
@@ -1885,9 +1925,11 @@ static struct clk atmel_ac97c0_pclk = {
 	.index		= 10,
 };
 
-struct platform_device *__init at32_add_device_ac97c(unsigned int id)
+struct platform_device *__init
+at32_add_device_ac97c(unsigned int id, struct ac97c_platform_data *data)
 {
 	struct platform_device *pdev;
+	struct ac97c_platform_data _data;
 
 	if (id != 0)
 		return NULL;
@@ -1898,19 +1940,37 @@ struct platform_device *__init at32_add_device_ac97c(unsigned int id)
 
 	if (platform_device_add_resources(pdev, atmel_ac97c0_resource,
 				ARRAY_SIZE(atmel_ac97c0_resource)))
-		goto err_add_resources;
+		goto fail;
 
-	select_peripheral(PB(20), PERIPH_B, 0);	/* SYNC	*/
-	select_peripheral(PB(21), PERIPH_B, 0);	/* SDO	*/
-	select_peripheral(PB(22), PERIPH_B, 0);	/* SDI	*/
-	select_peripheral(PB(23), PERIPH_B, 0);	/* SCLK	*/
+	if (!data) {
+		data = &_data;
+		memset(data, 0, sizeof(struct ac97c_platform_data));
+		data->reset_pin = GPIO_PIN_NONE;
+	}
+
+	data->dma_rx_periph_id = 3;
+	data->dma_tx_periph_id = 4;
+	data->dma_controller_id = 0;
+
+	if (platform_device_add_data(pdev, data,
+				sizeof(struct ac97c_platform_data)))
+		goto fail;
+
+	select_peripheral(PB(20), PERIPH_B, 0);	/* SDO	*/
+	select_peripheral(PB(21), PERIPH_B, 0);	/* SYNC	*/
+	select_peripheral(PB(22), PERIPH_B, 0);	/* SCLK	*/
+	select_peripheral(PB(23), PERIPH_B, 0);	/* SDI	*/
+
+	/* TODO: gpio_is_valid(data->reset_pin) with kernel 2.6.26. */
+	if (data->reset_pin != GPIO_PIN_NONE)
+		at32_select_gpio(data->reset_pin, 0);
 
 	atmel_ac97c0_pclk.dev = &pdev->dev;
 
 	platform_device_add(pdev);
 	return pdev;
 
-err_add_resources:
+fail:
 	platform_device_put(pdev);
 	return NULL;
 }
@@ -2025,7 +2085,7 @@ struct clk *at32_clock_list[] = {
 	&pbb_clk,
 	&at32_pm_pclk,
 	&at32_intc0_pclk,
-	&hmatrix_clk,
+	&at32_hmatrix_clk,
 	&ebi_clk,
 	&hramc_clk,
 	&sdramc_clk,
diff --git a/arch/avr32/mach-at32ap/clock.c b/arch/avr32/mach-at32ap/clock.c
index 4642117cc9ab..6c27ddac5adf 100644
--- a/arch/avr32/mach-at32ap/clock.c
+++ b/arch/avr32/mach-at32ap/clock.c
@@ -16,6 +16,8 @@
 #include <linux/device.h>
 #include <linux/string.h>
 
+#include <mach/chip.h>
+
 #include "clock.h"
 
 static DEFINE_SPINLOCK(clk_lock);
diff --git a/arch/avr32/mach-at32ap/hmatrix.c b/arch/avr32/mach-at32ap/hmatrix.c
new file mode 100644
index 000000000000..48f5ede77468
--- /dev/null
+++ b/arch/avr32/mach-at32ap/hmatrix.c
@@ -0,0 +1,88 @@
+/*
+ * High-Speed Bus Matrix helper functions
+ *
+ * Copyright (C) 2008 Atmel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/clk.h>
+#include <linux/io.h>
+
+#include <mach/chip.h>
+#include <mach/hmatrix.h>
+
+static inline void __hmatrix_write_reg(unsigned long offset, u32 value)
+{
+	__raw_writel(value, (void __iomem __force *)(HMATRIX_BASE + offset));
+}
+
+static inline u32 __hmatrix_read_reg(unsigned long offset)
+{
+	return __raw_readl((void __iomem __force *)(HMATRIX_BASE + offset));
+}
+
+/**
+ * hmatrix_write_reg - write HMATRIX configuration register
+ * @offset: register offset
+ * @value: value to be written to the register at @offset
+ */
+void hmatrix_write_reg(unsigned long offset, u32 value)
+{
+	clk_enable(&at32_hmatrix_clk);
+	__hmatrix_write_reg(offset, value);
+	__hmatrix_read_reg(offset);
+	clk_disable(&at32_hmatrix_clk);
+}
+
+/**
+ * hmatrix_read_reg - read HMATRIX configuration register
+ * @offset: register offset
+ *
+ * Returns the value of the register at @offset.
+ */
+u32 hmatrix_read_reg(unsigned long offset)
+{
+	u32 value;
+
+	clk_enable(&at32_hmatrix_clk);
+	value = __hmatrix_read_reg(offset);
+	clk_disable(&at32_hmatrix_clk);
+
+	return value;
+}
+
+/**
+ * hmatrix_sfr_set_bits - set bits in a slave's Special Function Register
+ * @slave_id: operate on the SFR belonging to this slave
+ * @mask: mask of bits to be set in the SFR
+ */
+void hmatrix_sfr_set_bits(unsigned int slave_id, u32 mask)
+{
+	u32 value;
+
+	clk_enable(&at32_hmatrix_clk);
+	value = __hmatrix_read_reg(HMATRIX_SFR(slave_id));
+	value |= mask;
+	__hmatrix_write_reg(HMATRIX_SFR(slave_id), value);
+	__hmatrix_read_reg(HMATRIX_SFR(slave_id));
+	clk_disable(&at32_hmatrix_clk);
+}
+
+/**
+ * hmatrix_sfr_set_bits - clear bits in a slave's Special Function Register
+ * @slave_id: operate on the SFR belonging to this slave
+ * @mask: mask of bits to be cleared in the SFR
+ */
+void hmatrix_sfr_clear_bits(unsigned int slave_id, u32 mask)
+{
+	u32 value;
+
+	clk_enable(&at32_hmatrix_clk);
+	value = __hmatrix_read_reg(HMATRIX_SFR(slave_id));
+	value &= ~mask;
+	__hmatrix_write_reg(HMATRIX_SFR(slave_id), value);
+	__hmatrix_read_reg(HMATRIX_SFR(slave_id));
+	clk_disable(&at32_hmatrix_clk);
+}
diff --git a/arch/avr32/mach-at32ap/hmatrix.h b/arch/avr32/mach-at32ap/hmatrix.h
deleted file mode 100644
index d10bfb60d68d..000000000000
--- a/arch/avr32/mach-at32ap/hmatrix.h
+++ /dev/null
@@ -1,182 +0,0 @@
-/*
- * Register definitions for High-Speed Bus Matrix
- */
-#ifndef __HMATRIX_H
-#define __HMATRIX_H
-
-/* HMATRIX register offsets */
-#define HMATRIX_MCFG0				0x0000
-#define HMATRIX_MCFG1				0x0004
-#define HMATRIX_MCFG2				0x0008
-#define HMATRIX_MCFG3				0x000c
-#define HMATRIX_MCFG4				0x0010
-#define HMATRIX_MCFG5				0x0014
-#define HMATRIX_MCFG6				0x0018
-#define HMATRIX_MCFG7				0x001c
-#define HMATRIX_MCFG8				0x0020
-#define HMATRIX_MCFG9				0x0024
-#define HMATRIX_MCFG10				0x0028
-#define HMATRIX_MCFG11				0x002c
-#define HMATRIX_MCFG12				0x0030
-#define HMATRIX_MCFG13				0x0034
-#define HMATRIX_MCFG14				0x0038
-#define HMATRIX_MCFG15				0x003c
-#define HMATRIX_SCFG0				0x0040
-#define HMATRIX_SCFG1				0x0044
-#define HMATRIX_SCFG2				0x0048
-#define HMATRIX_SCFG3				0x004c
-#define HMATRIX_SCFG4				0x0050
-#define HMATRIX_SCFG5				0x0054
-#define HMATRIX_SCFG6				0x0058
-#define HMATRIX_SCFG7				0x005c
-#define HMATRIX_SCFG8				0x0060
-#define HMATRIX_SCFG9				0x0064
-#define HMATRIX_SCFG10				0x0068
-#define HMATRIX_SCFG11				0x006c
-#define HMATRIX_SCFG12				0x0070
-#define HMATRIX_SCFG13				0x0074
-#define HMATRIX_SCFG14				0x0078
-#define HMATRIX_SCFG15				0x007c
-#define HMATRIX_PRAS0				0x0080
-#define HMATRIX_PRBS0				0x0084
-#define HMATRIX_PRAS1				0x0088
-#define HMATRIX_PRBS1				0x008c
-#define HMATRIX_PRAS2				0x0090
-#define HMATRIX_PRBS2				0x0094
-#define HMATRIX_PRAS3				0x0098
-#define HMATRIX_PRBS3				0x009c
-#define HMATRIX_PRAS4				0x00a0
-#define HMATRIX_PRBS4				0x00a4
-#define HMATRIX_PRAS5				0x00a8
-#define HMATRIX_PRBS5				0x00ac
-#define HMATRIX_PRAS6				0x00b0
-#define HMATRIX_PRBS6				0x00b4
-#define HMATRIX_PRAS7				0x00b8
-#define HMATRIX_PRBS7				0x00bc
-#define HMATRIX_PRAS8				0x00c0
-#define HMATRIX_PRBS8				0x00c4
-#define HMATRIX_PRAS9				0x00c8
-#define HMATRIX_PRBS9				0x00cc
-#define HMATRIX_PRAS10				0x00d0
-#define HMATRIX_PRBS10				0x00d4
-#define HMATRIX_PRAS11				0x00d8
-#define HMATRIX_PRBS11				0x00dc
-#define HMATRIX_PRAS12				0x00e0
-#define HMATRIX_PRBS12				0x00e4
-#define HMATRIX_PRAS13				0x00e8
-#define HMATRIX_PRBS13				0x00ec
-#define HMATRIX_PRAS14				0x00f0
-#define HMATRIX_PRBS14				0x00f4
-#define HMATRIX_PRAS15				0x00f8
-#define HMATRIX_PRBS15				0x00fc
-#define HMATRIX_MRCR				0x0100
-#define HMATRIX_SFR0				0x0110
-#define HMATRIX_SFR1				0x0114
-#define HMATRIX_SFR2				0x0118
-#define HMATRIX_SFR3				0x011c
-#define HMATRIX_SFR4				0x0120
-#define HMATRIX_SFR5				0x0124
-#define HMATRIX_SFR6				0x0128
-#define HMATRIX_SFR7				0x012c
-#define HMATRIX_SFR8				0x0130
-#define HMATRIX_SFR9				0x0134
-#define HMATRIX_SFR10				0x0138
-#define HMATRIX_SFR11				0x013c
-#define HMATRIX_SFR12				0x0140
-#define HMATRIX_SFR13				0x0144
-#define HMATRIX_SFR14				0x0148
-#define HMATRIX_SFR15				0x014c
-
-/* Bitfields in MCFGx */
-#define HMATRIX_ULBT_OFFSET			0
-#define HMATRIX_ULBT_SIZE			3
-
-/* Bitfields in SCFGx */
-#define HMATRIX_SLOT_CYCLE_OFFSET		0
-#define HMATRIX_SLOT_CYCLE_SIZE			8
-#define HMATRIX_DEFMSTR_TYPE_OFFSET		16
-#define HMATRIX_DEFMSTR_TYPE_SIZE		2
-#define HMATRIX_FIXED_DEFMSTR_OFFSET		18
-#define HMATRIX_FIXED_DEFMSTR_SIZE		4
-#define HMATRIX_ARBT_OFFSET			24
-#define HMATRIX_ARBT_SIZE			2
-
-/* Bitfields in PRASx */
-#define HMATRIX_M0PR_OFFSET			0
-#define HMATRIX_M0PR_SIZE			4
-#define HMATRIX_M1PR_OFFSET			4
-#define HMATRIX_M1PR_SIZE			4
-#define HMATRIX_M2PR_OFFSET			8
-#define HMATRIX_M2PR_SIZE			4
-#define HMATRIX_M3PR_OFFSET			12
-#define HMATRIX_M3PR_SIZE			4
-#define HMATRIX_M4PR_OFFSET			16
-#define HMATRIX_M4PR_SIZE			4
-#define HMATRIX_M5PR_OFFSET			20
-#define HMATRIX_M5PR_SIZE			4
-#define HMATRIX_M6PR_OFFSET			24
-#define HMATRIX_M6PR_SIZE			4
-#define HMATRIX_M7PR_OFFSET			28
-#define HMATRIX_M7PR_SIZE			4
-
-/* Bitfields in PRBSx */
-#define HMATRIX_M8PR_OFFSET			0
-#define HMATRIX_M8PR_SIZE			4
-#define HMATRIX_M9PR_OFFSET			4
-#define HMATRIX_M9PR_SIZE			4
-#define HMATRIX_M10PR_OFFSET			8
-#define HMATRIX_M10PR_SIZE			4
-#define HMATRIX_M11PR_OFFSET			12
-#define HMATRIX_M11PR_SIZE			4
-#define HMATRIX_M12PR_OFFSET			16
-#define HMATRIX_M12PR_SIZE			4
-#define HMATRIX_M13PR_OFFSET			20
-#define HMATRIX_M13PR_SIZE			4
-#define HMATRIX_M14PR_OFFSET			24
-#define HMATRIX_M14PR_SIZE			4
-#define HMATRIX_M15PR_OFFSET			28
-#define HMATRIX_M15PR_SIZE			4
-
-/* Bitfields in SFR4 */
-#define HMATRIX_CS1A_OFFSET			1
-#define HMATRIX_CS1A_SIZE			1
-#define HMATRIX_CS3A_OFFSET			3
-#define HMATRIX_CS3A_SIZE			1
-#define HMATRIX_CS4A_OFFSET			4
-#define HMATRIX_CS4A_SIZE			1
-#define HMATRIX_CS5A_OFFSET			5
-#define HMATRIX_CS5A_SIZE			1
-#define HMATRIX_DBPUC_OFFSET			8
-#define HMATRIX_DBPUC_SIZE			1
-
-/* Constants for ULBT */
-#define HMATRIX_ULBT_INFINITE			0
-#define HMATRIX_ULBT_SINGLE			1
-#define HMATRIX_ULBT_FOUR_BEAT			2
-#define HMATRIX_ULBT_EIGHT_BEAT			3
-#define HMATRIX_ULBT_SIXTEEN_BEAT		4
-
-/* Constants for DEFMSTR_TYPE */
-#define HMATRIX_DEFMSTR_TYPE_NO_DEFAULT		0
-#define HMATRIX_DEFMSTR_TYPE_LAST_DEFAULT	1
-#define HMATRIX_DEFMSTR_TYPE_FIXED_DEFAULT	2
-
-/* Constants for ARBT */
-#define HMATRIX_ARBT_ROUND_ROBIN		0
-#define HMATRIX_ARBT_FIXED_PRIORITY		1
-
-/* Bit manipulation macros */
-#define HMATRIX_BIT(name)					\
-	(1 << HMATRIX_##name##_OFFSET)
-#define HMATRIX_BF(name,value)					\
-	(((value) & ((1 << HMATRIX_##name##_SIZE) - 1))		\
-	 << HMATRIX_##name##_OFFSET)
-#define HMATRIX_BFEXT(name,value)				\
-	(((value) >> HMATRIX_##name##_OFFSET)			\
-	 & ((1 << HMATRIX_##name##_SIZE) - 1))
-#define HMATRIX_BFINS(name,value,old)				\
-	(((old) & ~(((1 << HMATRIX_##name##_SIZE) - 1)		\
-		    << HMATRIX_##name##_OFFSET))		\
-	 | HMATRIX_BF(name,value))
-
-#endif /* __HMATRIX_H */
diff --git a/arch/avr32/mach-at32ap/hsmc.c b/arch/avr32/mach-at32ap/hsmc.c
index fa427ed42787..2875c11be95d 100644
--- a/arch/avr32/mach-at32ap/hsmc.c
+++ b/arch/avr32/mach-at32ap/hsmc.c
@@ -14,7 +14,7 @@
 #include <linux/platform_device.h>
 
 #include <asm/io.h>
-#include <asm/arch/smc.h>
+#include <mach/smc.h>
 
 #include "hsmc.h"
 
@@ -278,4 +278,4 @@ static int __init hsmc_init(void)
 {
 	return platform_driver_register(&hsmc_driver);
 }
-arch_initcall(hsmc_init);
+core_initcall(hsmc_init);
diff --git a/arch/avr32/mach-at32ap/include/mach/at32ap700x.h b/arch/avr32/mach-at32ap/include/mach/at32ap700x.h
new file mode 100644
index 000000000000..1e9852d65cca
--- /dev/null
+++ b/arch/avr32/mach-at32ap/include/mach/at32ap700x.h
@@ -0,0 +1,86 @@
+/*
+ * Pin definitions for AT32AP7000.
+ *
+ * Copyright (C) 2006 Atmel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __ASM_ARCH_AT32AP700X_H__
+#define __ASM_ARCH_AT32AP700X_H__
+
+#define GPIO_PERIPH_A	0
+#define GPIO_PERIPH_B	1
+
+/*
+ * Pin numbers identifying specific GPIO pins on the chip. They can
+ * also be converted to IRQ numbers by passing them through
+ * gpio_to_irq().
+ */
+#define GPIO_PIOA_BASE	(0)
+#define GPIO_PIOB_BASE	(GPIO_PIOA_BASE + 32)
+#define GPIO_PIOC_BASE	(GPIO_PIOB_BASE + 32)
+#define GPIO_PIOD_BASE	(GPIO_PIOC_BASE + 32)
+#define GPIO_PIOE_BASE	(GPIO_PIOD_BASE + 32)
+
+#define GPIO_PIN_PA(N)	(GPIO_PIOA_BASE + (N))
+#define GPIO_PIN_PB(N)	(GPIO_PIOB_BASE + (N))
+#define GPIO_PIN_PC(N)	(GPIO_PIOC_BASE + (N))
+#define GPIO_PIN_PD(N)	(GPIO_PIOD_BASE + (N))
+#define GPIO_PIN_PE(N)	(GPIO_PIOE_BASE + (N))
+
+
+/*
+ * DMAC peripheral hardware handshaking interfaces, used with dw_dmac
+ */
+#define DMAC_MCI_RX		0
+#define DMAC_MCI_TX		1
+#define DMAC_DAC_TX		2
+#define DMAC_AC97_A_RX		3
+#define DMAC_AC97_A_TX		4
+#define DMAC_AC97_B_RX		5
+#define DMAC_AC97_B_TX		6
+#define DMAC_DMAREQ_0		7
+#define DMAC_DMAREQ_1		8
+#define DMAC_DMAREQ_2		9
+#define DMAC_DMAREQ_3		10
+
+/* HSB master IDs */
+#define HMATRIX_MASTER_CPU_DCACHE		0
+#define HMATRIX_MASTER_CPU_ICACHE		1
+#define HMATRIX_MASTER_PDC			2
+#define HMATRIX_MASTER_ISI			3
+#define HMATRIX_MASTER_USBA			4
+#define HMATRIX_MASTER_LCDC			5
+#define HMATRIX_MASTER_MACB0			6
+#define HMATRIX_MASTER_MACB1			7
+#define HMATRIX_MASTER_DMACA_M0			8
+#define HMATRIX_MASTER_DMACA_M1			9
+
+/* HSB slave IDs */
+#define HMATRIX_SLAVE_SRAM0			0
+#define HMATRIX_SLAVE_SRAM1			1
+#define HMATRIX_SLAVE_PBA			2
+#define HMATRIX_SLAVE_PBB			3
+#define HMATRIX_SLAVE_EBI			4
+#define HMATRIX_SLAVE_USBA			5
+#define HMATRIX_SLAVE_LCDC			6
+#define HMATRIX_SLAVE_DMACA			7
+
+/* Bits in HMATRIX SFR4 (EBI) */
+#define HMATRIX_EBI_SDRAM_ENABLE		(1 << 1)
+#define HMATRIX_EBI_NAND_ENABLE			(1 << 3)
+#define HMATRIX_EBI_CF0_ENABLE			(1 << 4)
+#define HMATRIX_EBI_CF1_ENABLE			(1 << 5)
+#define HMATRIX_EBI_PULLUP_DISABLE		(1 << 8)
+
+/*
+ * Base addresses of controllers that may be accessed early by
+ * platform code.
+ */
+#define PM_BASE		0xfff00000
+#define HMATRIX_BASE	0xfff00800
+#define SDRAMC_BASE	0xfff03800
+
+#endif /* __ASM_ARCH_AT32AP700X_H__ */
diff --git a/arch/avr32/mach-at32ap/include/mach/board.h b/arch/avr32/mach-at32ap/include/mach/board.h
new file mode 100644
index 000000000000..e60e9076544d
--- /dev/null
+++ b/arch/avr32/mach-at32ap/include/mach/board.h
@@ -0,0 +1,121 @@
+/*
+ * Platform data definitions.
+ */
+#ifndef __ASM_ARCH_BOARD_H
+#define __ASM_ARCH_BOARD_H
+
+#include <linux/types.h>
+
+#define GPIO_PIN_NONE	(-1)
+
+/*
+ * Clock rates for various on-board oscillators. The number of entries
+ * in this array is chip-dependent.
+ */
+extern unsigned long at32_board_osc_rates[];
+  
+/* Add basic devices: system manager, interrupt controller, portmuxes, etc. */
+void at32_add_system_devices(void);
+
+#define ATMEL_MAX_UART	4
+extern struct platform_device *atmel_default_console_device;
+
+struct atmel_uart_data {
+	short		use_dma_tx;	/* use transmit DMA? */
+	short		use_dma_rx;	/* use receive DMA? */
+	void __iomem	*regs;		/* virtual base address, if any */
+};
+void at32_map_usart(unsigned int hw_id, unsigned int line);
+struct platform_device *at32_add_device_usart(unsigned int id);
+
+struct eth_platform_data {
+	u32	phy_mask;
+	u8	is_rmii;
+};
+struct platform_device *
+at32_add_device_eth(unsigned int id, struct eth_platform_data *data);
+
+struct spi_board_info;
+struct platform_device *
+at32_add_device_spi(unsigned int id, struct spi_board_info *b, unsigned int n);
+
+struct atmel_lcdfb_info;
+struct platform_device *
+at32_add_device_lcdc(unsigned int id, struct atmel_lcdfb_info *data,
+		     unsigned long fbmem_start, unsigned long fbmem_len,
+		     unsigned int pin_config);
+
+struct usba_platform_data;
+struct platform_device *
+at32_add_device_usba(unsigned int id, struct usba_platform_data *data);
+
+struct ide_platform_data {
+	u8      cs;
+};
+struct platform_device *
+at32_add_device_ide(unsigned int id, unsigned int extint,
+		    struct ide_platform_data *data);
+
+/* mask says which PWM channels to mux */
+struct platform_device *at32_add_device_pwm(u32 mask);
+
+/* depending on what's hooked up, not all SSC pins will be used */
+#define	ATMEL_SSC_TK		0x01
+#define	ATMEL_SSC_TF		0x02
+#define	ATMEL_SSC_TD		0x04
+#define	ATMEL_SSC_TX		(ATMEL_SSC_TK | ATMEL_SSC_TF | ATMEL_SSC_TD)
+
+#define	ATMEL_SSC_RK		0x10
+#define	ATMEL_SSC_RF		0x20
+#define	ATMEL_SSC_RD		0x40
+#define	ATMEL_SSC_RX		(ATMEL_SSC_RK | ATMEL_SSC_RF | ATMEL_SSC_RD)
+
+struct platform_device *
+at32_add_device_ssc(unsigned int id, unsigned int flags);
+
+struct i2c_board_info;
+struct platform_device *at32_add_device_twi(unsigned int id,
+					    struct i2c_board_info *b,
+					    unsigned int n);
+
+struct mci_platform_data;
+struct platform_device *
+at32_add_device_mci(unsigned int id, struct mci_platform_data *data);
+
+struct ac97c_platform_data {
+	unsigned short dma_rx_periph_id;
+	unsigned short dma_tx_periph_id;
+	unsigned short dma_controller_id;
+	int reset_pin;
+};
+struct platform_device *
+at32_add_device_ac97c(unsigned int id, struct ac97c_platform_data *data);
+
+struct platform_device *at32_add_device_abdac(unsigned int id);
+struct platform_device *at32_add_device_psif(unsigned int id);
+
+struct cf_platform_data {
+	int	detect_pin;
+	int	reset_pin;
+	int	vcc_pin;
+	int	ready_pin;
+	u8	cs;
+};
+struct platform_device *
+at32_add_device_cf(unsigned int id, unsigned int extint,
+		struct cf_platform_data *data);
+
+/* NAND / SmartMedia */
+struct atmel_nand_data {
+	int	enable_pin;	/* chip enable */
+	int	det_pin;	/* card detect */
+	int	rdy_pin;	/* ready/busy */
+	u8	ale;		/* address line number connected to ALE */
+	u8	cle;		/* address line number connected to CLE */
+	u8	bus_width_16;	/* buswidth is 16 bit */
+	struct mtd_partition *(*partition_info)(int size, int *num_partitions);
+};
+struct platform_device *
+at32_add_device_nand(unsigned int id, struct atmel_nand_data *data);
+
+#endif /* __ASM_ARCH_BOARD_H */
diff --git a/arch/avr32/mach-at32ap/include/mach/chip.h b/arch/avr32/mach-at32ap/include/mach/chip.h
new file mode 100644
index 000000000000..5efca6da6acb
--- /dev/null
+++ b/arch/avr32/mach-at32ap/include/mach/chip.h
@@ -0,0 +1,19 @@
+/*
+ * AVR32 chip-specific definitions
+ *
+ * Copyright (C) 2008 Atmel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __ASM_AVR32_ARCH_CHIP_H__
+#define __ASM_AVR32_ARCH_CHIP_H__
+
+#if defined(CONFIG_CPU_AT32AP700X)
+# include <mach/at32ap700x.h>
+#else
+# error Unknown chip type selected
+#endif
+
+#endif /* __ASM_AVR32_ARCH_CHIP_H__ */
diff --git a/include/asm-avr32/arch-at32ap/cpu.h b/arch/avr32/mach-at32ap/include/mach/cpu.h
index 44d0bfa1f409..44d0bfa1f409 100644
--- a/include/asm-avr32/arch-at32ap/cpu.h
+++ b/arch/avr32/mach-at32ap/include/mach/cpu.h
diff --git a/include/asm-avr32/arch-at32ap/gpio.h b/arch/avr32/mach-at32ap/include/mach/gpio.h
index 0180f584ef03..0180f584ef03 100644
--- a/include/asm-avr32/arch-at32ap/gpio.h
+++ b/arch/avr32/mach-at32ap/include/mach/gpio.h
diff --git a/arch/avr32/mach-at32ap/include/mach/hmatrix.h b/arch/avr32/mach-at32ap/include/mach/hmatrix.h
new file mode 100644
index 000000000000..7a368f227ebc
--- /dev/null
+++ b/arch/avr32/mach-at32ap/include/mach/hmatrix.h
@@ -0,0 +1,55 @@
+/*
+ * High-Speed Bus Matrix configuration registers
+ *
+ * Copyright (C) 2008 Atmel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __HMATRIX_H
+#define __HMATRIX_H
+
+extern struct clk at32_hmatrix_clk;
+
+void hmatrix_write_reg(unsigned long offset, u32 value);
+u32 hmatrix_read_reg(unsigned long offset);
+
+void hmatrix_sfr_set_bits(unsigned int slave_id, u32 mask);
+void hmatrix_sfr_clear_bits(unsigned int slave_id, u32 mask);
+
+/* Master Configuration register */
+#define HMATRIX_MCFG(m)			(0x0000 + 4 * (m))
+/* Undefined length burst limit */
+# define HMATRIX_MCFG_ULBT_INFINITE	0	/* Infinite length */
+# define HMATRIX_MCFG_ULBT_SINGLE	1	/* Single Access */
+# define HMATRIX_MCFG_ULBT_FOUR_BEAT	2	/* Four beat */
+# define HMATRIX_MCFG_ULBT_EIGHT_BEAT	3	/* Eight beat */
+# define HMATRIX_MCFG_ULBT_SIXTEEN_BEAT	4	/* Sixteen beat */
+
+/* Slave Configuration register */
+#define HMATRIX_SCFG(s)			(0x0040 + 4 * (s))
+# define HMATRIX_SCFG_SLOT_CYCLE(x)	((x) <<  0)	/* Max burst cycles */
+# define HMATRIX_SCFG_DEFMSTR_NONE	(  0 << 16)	/* No default master */
+# define HMATRIX_SCFG_DEFMSTR_LAST	(  1 << 16)	/* Last def master */
+# define HMATRIX_SCFG_DEFMSTR_FIXED	(  2 << 16)	/* Fixed def master */
+# define HMATRIX_SCFG_FIXED_DEFMSTR(m)	((m) << 18)	/* Fixed master ID */
+# define HMATRIX_SCFG_ARBT_ROUND_ROBIN	(  0 << 24)	/* RR arbitration */
+# define HMATRIX_SCFG_ARBT_FIXED_PRIO	(  1 << 24)	/* Fixed priority */
+
+/* Slave Priority register A (master 0..7) */
+#define HMATRIX_PRAS(s)			(0x0080 + 8 * (s))
+# define HMATRIX_PRAS_PRIO(m, p)	((p) << ((m) * 4))
+
+/* Slave Priority register A (master 8..15) */
+#define HMATRIX_PRBS(s)			(0x0084 + 8 * (s))
+# define HMATRIX_PRBS_PRIO(m, p)	((p) << (((m) - 8) * 4))
+
+/* Master Remap Control Register */
+#define HMATRIX_MRCR				0x0100
+# define HMATRIX_MRCR_REMAP(m)		(  1 << (m))	/* Remap master m */
+
+/* Special Function Register. Bit definitions are chip-specific */
+#define HMATRIX_SFR(s)			(0x0110 + 4 * (s))
+
+#endif /* __HMATRIX_H */
diff --git a/include/asm-avr32/arch-at32ap/init.h b/arch/avr32/mach-at32ap/include/mach/init.h
index bc40e3d46150..bc40e3d46150 100644
--- a/include/asm-avr32/arch-at32ap/init.h
+++ b/arch/avr32/mach-at32ap/include/mach/init.h
diff --git a/include/asm-avr32/arch-at32ap/io.h b/arch/avr32/mach-at32ap/include/mach/io.h
index 4ec6abc68ea3..4ec6abc68ea3 100644
--- a/include/asm-avr32/arch-at32ap/io.h
+++ b/arch/avr32/mach-at32ap/include/mach/io.h
diff --git a/include/asm-avr32/arch-at32ap/irq.h b/arch/avr32/mach-at32ap/include/mach/irq.h
index 608e350368c7..608e350368c7 100644
--- a/include/asm-avr32/arch-at32ap/irq.h
+++ b/arch/avr32/mach-at32ap/include/mach/irq.h
diff --git a/include/asm-avr32/arch-at32ap/pm.h b/arch/avr32/mach-at32ap/include/mach/pm.h
index 979b355b77b6..979b355b77b6 100644
--- a/include/asm-avr32/arch-at32ap/pm.h
+++ b/arch/avr32/mach-at32ap/include/mach/pm.h
diff --git a/include/asm-avr32/arch-at32ap/portmux.h b/arch/avr32/mach-at32ap/include/mach/portmux.h
index b1abe6b4e4ef..b1abe6b4e4ef 100644
--- a/include/asm-avr32/arch-at32ap/portmux.h
+++ b/arch/avr32/mach-at32ap/include/mach/portmux.h
diff --git a/include/asm-avr32/arch-at32ap/smc.h b/arch/avr32/mach-at32ap/include/mach/smc.h
index c98eea44a70a..c98eea44a70a 100644
--- a/include/asm-avr32/arch-at32ap/smc.h
+++ b/arch/avr32/mach-at32ap/include/mach/smc.h
diff --git a/include/asm-avr32/arch-at32ap/sram.h b/arch/avr32/mach-at32ap/include/mach/sram.h
index 4838dae7601a..4838dae7601a 100644
--- a/include/asm-avr32/arch-at32ap/sram.h
+++ b/arch/avr32/mach-at32ap/include/mach/sram.h
diff --git a/arch/avr32/mach-at32ap/pio.c b/arch/avr32/mach-at32ap/pio.c
index 60da03ba7117..405ee6bad4ce 100644
--- a/arch/avr32/mach-at32ap/pio.c
+++ b/arch/avr32/mach-at32ap/pio.c
@@ -17,7 +17,7 @@
 #include <asm/gpio.h>
 #include <asm/io.h>
 
-#include <asm/arch/portmux.h>
+#include <mach/portmux.h>
 
 #include "pio.h"
 
@@ -360,6 +360,8 @@ static int __init pio_probe(struct platform_device *pdev)
 	pio->chip.label = pio->name;
 	pio->chip.base = pdev->id * 32;
 	pio->chip.ngpio = 32;
+	pio->chip.dev = &pdev->dev;
+	pio->chip.owner = THIS_MODULE;
 
 	pio->chip.direction_input = direction_input;
 	pio->chip.get = gpio_get;
diff --git a/arch/avr32/mach-at32ap/pm-at32ap700x.S b/arch/avr32/mach-at32ap/pm-at32ap700x.S
index 0a53ad314ff4..5be4de65b209 100644
--- a/arch/avr32/mach-at32ap/pm-at32ap700x.S
+++ b/arch/avr32/mach-at32ap/pm-at32ap700x.S
@@ -10,7 +10,7 @@
 #include <asm/asm.h>
 #include <asm/asm-offsets.h>
 #include <asm/thread_info.h>
-#include <asm/arch/pm.h>
+#include <mach/pm.h>
 
 #include "pm.h"
 #include "sdramc.h"
diff --git a/arch/avr32/mach-at32ap/pm.c b/arch/avr32/mach-at32ap/pm.c
index 0b764320135d..f021edfeaab0 100644
--- a/arch/avr32/mach-at32ap/pm.c
+++ b/arch/avr32/mach-at32ap/pm.c
@@ -14,11 +14,9 @@
 #include <asm/cacheflush.h>
 #include <asm/sysreg.h>
 
-#include <asm/arch/pm.h>
-#include <asm/arch/sram.h>
-
-/* FIXME: This is only valid for AP7000 */
-#define SDRAMC_BASE	0xfff03800
+#include <mach/chip.h>
+#include <mach/pm.h>
+#include <mach/sram.h>
 
 #include "sdramc.h"
 
diff --git a/arch/avr32/mach-at32ap/pm.h b/arch/avr32/mach-at32ap/pm.h
index 694d521edc2f..532a3732c214 100644
--- a/arch/avr32/mach-at32ap/pm.h
+++ b/arch/avr32/mach-at32ap/pm.h
@@ -4,14 +4,6 @@
 #ifndef __ARCH_AVR32_MACH_AT32AP_PM_H__
 #define __ARCH_AVR32_MACH_AT32AP_PM_H__
 
-/*
- * We can reduce the code size a bit by using a constant here. Since
- * this file is only used on AVR32 AP CPUs with segmentation enabled,
- * it's safe to not use ioremap. Generic drivers should of course
- * never do this.
- */
-#define AT32_PM_BASE	0xfff00000
-
 /* PM register offsets */
 #define PM_MCCTRL				0x0000
 #define PM_CKSEL				0x0004
@@ -113,8 +105,8 @@
 
 /* Register access macros */
 #define pm_readl(reg)							\
-	__raw_readl((void __iomem __force *)AT32_PM_BASE + PM_##reg)
+	__raw_readl((void __iomem __force *)PM_BASE + PM_##reg)
 #define pm_writel(reg,value)						\
-	__raw_writel((value), (void __iomem __force *)AT32_PM_BASE + PM_##reg)
+	__raw_writel((value), (void __iomem __force *)PM_BASE + PM_##reg)
 
 #endif /* __ARCH_AVR32_MACH_AT32AP_PM_H__ */
diff --git a/arch/avr32/mm/init.c b/arch/avr32/mm/init.c
index 3c85fdaa9487..fa92ff6d95f7 100644
--- a/arch/avr32/mm/init.c
+++ b/arch/avr32/mm/init.c
@@ -38,45 +38,6 @@ EXPORT_SYMBOL(empty_zero_page);
  */
 unsigned long mmu_context_cache = NO_CONTEXT;
 
-void show_mem(void)
-{
-	int total = 0, reserved = 0, cached = 0;
-	int slab = 0, free = 0, shared = 0;
-	pg_data_t *pgdat;
-
-	printk("Mem-info:\n");
-	show_free_areas();
-
-	for_each_online_pgdat(pgdat) {
-		struct page *page, *end;
-
-		page = pgdat->node_mem_map;
-		end = page + pgdat->node_spanned_pages;
-
-		do {
-			total++;
-			if (PageReserved(page))
-				reserved++;
-			else if (PageSwapCache(page))
-				cached++;
-			else if (PageSlab(page))
-				slab++;
-			else if (!page_count(page))
-				free++;
-			else
-				shared += page_count(page) - 1;
-			page++;
-		} while (page < end);
-	}
-
-	printk ("%d pages of RAM\n", total);
-	printk ("%d free pages\n", free);
-	printk ("%d reserved pages\n", reserved);
-	printk ("%d slab pages\n", slab);
-	printk ("%d pages shared\n", shared);
-	printk ("%d pages swap cached\n", cached);
-}
-
 /*
  * paging_init() sets up the page tables
  *
diff --git a/arch/blackfin/Kconfig b/arch/blackfin/Kconfig
index b83b8ef84e91..4154ff1101fa 100644
--- a/arch/blackfin/Kconfig
+++ b/arch/blackfin/Kconfig
@@ -234,7 +234,7 @@ config MEM_MT48LC16M16A2TG_75
 	bool
 	depends on (BFIN533_EZKIT || BFIN561_EZKIT \
 		|| BFIN533_BLUETECHNIX_CM || BFIN537_BLUETECHNIX_CM \
-		|| H8606_HVSISTEMAS)
+		|| H8606_HVSISTEMAS || BFIN527_BLUETECHNIX_CM)
 	default y
 
 config MEM_MT48LC32M8A2_75
@@ -249,7 +249,7 @@ config MEM_MT48LC8M32B2B5_7
 
 config MEM_MT48LC32M16A2TG_75
 	bool
-	depends on (BFIN527_EZKIT || BFIN532_IP0X)
+	depends on (BFIN527_EZKIT || BFIN532_IP0X || BLACKSTAMP)
 	default y
 
 source "arch/blackfin/mach-bf527/Kconfig"
@@ -292,7 +292,7 @@ config CLKIN_HZ
 	int "Frequency of the crystal on the board in Hz"
 	default "11059200" if BFIN533_STAMP
 	default "27000000" if BFIN533_EZKIT
-	default "25000000" if (BFIN537_STAMP || BFIN527_EZKIT || H8606_HVSISTEMAS)
+	default "25000000" if (BFIN537_STAMP || BFIN527_EZKIT || H8606_HVSISTEMAS || BLACKSTAMP)
 	default "30000000" if BFIN561_EZKIT
 	default "24576000" if PNAV10
 	default "10000000" if BFIN532_IP0X
@@ -310,25 +310,6 @@ config BFIN_KERNEL_CLOCK
 	  are also not changed, and the Bootloader does 100% of the hardware
 	  configuration.
 
-config MEM_SIZE
-	int "SDRAM Memory Size in MBytes"
-	depends on BFIN_KERNEL_CLOCK
-	default 64
-
-config MEM_ADD_WIDTH
-	int "Memory Address Width"
-	depends on BFIN_KERNEL_CLOCK
-	depends on (!BF54x)
-	range 8 11
-	default  9 if BFIN533_EZKIT
-	default  9 if BFIN561_EZKIT
-	default  9 if H8606_HVSISTEMAS
-	default 10 if BFIN527_EZKIT
-	default 10 if BFIN537_STAMP
-	default 11 if BFIN533_STAMP
-	default 10 if PNAV10
-	default 10 if BFIN532_IP0X
-
 config PLL_BYPASS
 	bool "Bypass PLL"
 	depends on BFIN_KERNEL_CLOCK
@@ -349,10 +330,9 @@ config VCO_MULT
 	default "45" if BFIN533_STAMP
 	default "20" if (BFIN537_STAMP || BFIN527_EZKIT || BFIN548_EZKIT || BFIN548_BLUETECHNIX_CM)
 	default "22" if BFIN533_BLUETECHNIX_CM
-	default "20" if BFIN537_BLUETECHNIX_CM
-	default "20" if BFIN561_BLUETECHNIX_CM
+	default "20" if (BFIN537_BLUETECHNIX_CM || BFIN527_BLUETECHNIX_CM || BFIN561_BLUETECHNIX_CM)
 	default "20" if BFIN561_EZKIT
-	default "16" if H8606_HVSISTEMAS
+	default "16" if (H8606_HVSISTEMAS || BLACKSTAMP)
 	help
 	  This controls the frequency of the on-chip PLL. This can be between 1 and 64.
 	  PLL Frequency = (Crystal Frequency) * (this setting)
@@ -390,7 +370,7 @@ config SCLK_DIV
 
 config MAX_MEM_SIZE
 	int "Max SDRAM Memory Size in MBytes"
-	depends on !BFIN_KERNEL_CLOCK && !MPU
+	depends on !MPU
 	default 512
 	help
 	  This is the max memory size that the kernel will create CPLB
@@ -642,6 +622,33 @@ config CPLB_SWITCH_TAB_L1
 	  If enabled, the CPLB Switch Tables are linked
 	  into L1 data memory. (less latency)
 
+comment "Speed Optimizations"
+config BFIN_INS_LOWOVERHEAD
+	bool "ins[bwl] low overhead, higher interrupt latency"
+	default y
+	help
+	  Reads on the Blackfin are speculative. In Blackfin terms, this means
+	  they can be interrupted at any time (even after they have been issued
+	  on to the external bus), and re-issued after the interrupt occurs.
+	  For memory - this is not a big deal, since memory does not change if
+	  it sees a read.
+
+	  If a FIFO is sitting on the end of the read, it will see two reads,
+	  when the core only sees one since the FIFO receives both the read
+	  which is cancelled (and not delivered to the core) and the one which
+	  is re-issued (which is delivered to the core).
+
+	  To solve this, interrupts are turned off before reads occur to
+	  I/O space. This option controls which the overhead/latency of
+	  controlling interrupts during this time
+	   "n" turns interrupts off every read
+		(higher overhead, but lower interrupt latency)
+	   "y" turns interrupts off every loop
+		(low overhead, but longer interrupt latency)
+
+	  default behavior is to leave this set to on (type "Y"). If you are experiencing
+	  interrupt latency issues, it is safe and OK to turn this off.
+
 endmenu
 
 
@@ -748,14 +755,6 @@ config BFIN_WT
 
 endchoice
 
-config L1_MAX_PIECE
-	int "Set the max L1 SRAM pieces"
-	default 16
-	help
-	  Set the max memory pieces for the L1 SRAM allocation algorithm.
-	  Min value is 16. Max value is 1024.
-
-
 config MPU
 	bool "Enable the memory protection unit (EXPERIMENTAL)"
 	default n
@@ -856,6 +855,7 @@ menu "Bus options (PCI, PCMCIA, EISA, MCA, ISA)"
 
 config PCI
 	bool "PCI support"
+	depends on BROKEN
 	help
 	  Support for PCI bus.
 
@@ -899,7 +899,7 @@ config ARCH_SUSPEND_POSSIBLE
 	depends on !SMP
 
 choice
-	prompt "Default Power Saving Mode"
+	prompt "Standby Power Saving Mode"
 	depends on PM
 	default PM_BFIN_SLEEP_DEEPER
 config  PM_BFIN_SLEEP_DEEPER
@@ -918,6 +918,8 @@ config  PM_BFIN_SLEEP_DEEPER
 	  normal during Sleep Deeper, due to the reduced SCLK frequency.
 	  When in the sleep mode, system DMA access to L1 memory is not supported.
 
+	  If unsure, select "Sleep Deeper".
+
 config  PM_BFIN_SLEEP
 	bool "Sleep"
 	help
@@ -925,15 +927,17 @@ config  PM_BFIN_SLEEP
 	  dissipation by disabling the clock to the processor core (CCLK).
 	  The PLL and system clock (SCLK), however, continue to operate in
 	  this mode. Typically an external event or RTC activity will wake
-	  up the processor. When in the sleep mode,
-	  system DMA access to L1 memory is not supported.
+	  up the processor. When in the sleep mode, system DMA access to L1
+	  memory is not supported.
+
+	  If unsure, select "Sleep Deeper".
 endchoice
 
 config PM_WAKEUP_BY_GPIO
-	bool "Cause Wakeup Event by GPIO"
+	bool "Allow Wakeup from Standby by GPIO"
 
 config PM_WAKEUP_GPIO_NUMBER
-	int "Wakeup GPIO number"
+	int "GPIO number"
 	range 0 47
 	depends on PM_WAKEUP_BY_GPIO
 	default 2 if BFIN537_STAMP
@@ -954,6 +958,22 @@ config  PM_WAKEUP_GPIO_POLAR_EDGE_B
 	bool "Both EDGE"
 endchoice
 
+comment "Possible Suspend Mem / Hibernate Wake-Up Sources"
+	depends on PM
+
+config PM_BFIN_WAKE_PH6
+	bool "Allow Wake-Up from on-chip PHY or PH6 GP"
+	depends on PM && (BF52x || BF534 || BF536 || BF537)
+	default n
+	help
+	  Enable PHY and PH6 GP Wake-Up (Voltage Regulator Power-Up)
+
+config PM_BFIN_WAKE_GP
+	bool "Allow Wake-Up from GPIOs"
+	depends on PM && BF54x
+	default n
+	help
+	  Enable General-Purpose Wake-Up (Voltage Regulator Power-Up)
 endmenu
 
 menu "CPU Frequency scaling"
diff --git a/arch/blackfin/Kconfig.debug b/arch/blackfin/Kconfig.debug
index c61bdebb9974..c468624d55f0 100644
--- a/arch/blackfin/Kconfig.debug
+++ b/arch/blackfin/Kconfig.debug
@@ -154,13 +154,6 @@ config EARLY_PRINTK
 	  all of this lives in the init section and is thrown away after the
 	  kernel boots completely.
 
-config DUAL_CORE_TEST_MODULE
-	tristate "Dual Core Test Module"
-	depends on (BF561)
-	default n
-	help
-	  Say Y here to build-in dual core test module for dual core test.
-
 config CPLB_INFO
 	bool "Display the CPLB information"
 	help
diff --git a/arch/blackfin/Makefile b/arch/blackfin/Makefile
index 3cbe16caad4b..eac0533d6e4f 100644
--- a/arch/blackfin/Makefile
+++ b/arch/blackfin/Makefile
@@ -6,8 +6,9 @@
 # for more details.
 #
 
-
-CROSS_COMPILE    ?= bfin-uclinux-
+ifeq ($(CROSS_COMPILE),)
+CROSS_COMPILE    := bfin-uclinux-
+endif
 LDFLAGS_vmlinux  := -X
 OBJCOPYFLAGS     := -O binary -R .note -R .comment -S
 GZFLAGS          := -9
@@ -97,36 +98,20 @@ libs-y   += arch/$(ARCH)/lib/
 
 drivers-$(CONFIG_OPROFILE) += arch/$(ARCH)/oprofile/
 
+machdirs	:= $(patsubst %,arch/blackfin/mach-%/, $(machine-y))
 
+KBUILD_CFLAGS += -Iarch/$(ARCH)/include/
+KBUILD_CFLAGS += -Iarch/$(ARCH)/mach-$(MACHINE)/include
 
-#	Update machine arch symlinks if something which affects
-#	them changed.  We use .mach to indicate when they were updated
-#	last, otherwise make uses the target directory mtime.
-
-       show_mach_symlink = :
- quiet_show_mach_symlink = echo '  SYMLINK include/asm-$(ARCH)/mach-$(MACHINE) -> include/asm-$(ARCH)/mach'
-silent_show_mach_symlink = :
-include/asm-blackfin/.mach: $(wildcard include/config/arch/*.h) include/config/auto.conf
-	@$($(quiet)show_mach_symlink)
-ifneq ($(KBUILD_SRC),)
-	$(Q)mkdir -p include/asm-$(ARCH)
-	$(Q)ln -fsn $(srctree)/include/asm-$(ARCH)/mach-$(MACHINE) include/asm-$(ARCH)/mach
-else
-	$(Q)ln -fsn mach-$(MACHINE) include/asm-$(ARCH)/mach
-endif
-	@touch $@
+KBUILD_CPPFLAGS	+= $(patsubst %,-I$(srctree)/%include,$(machdirs))
 
 CLEAN_FILES += \
-	include/asm-$(ARCH)/asm-offsets.h \
+	arch/$(ARCH)/include/asm/asm-offsets.h \
 	arch/$(ARCH)/kernel/asm-offsets.s \
-	include/asm-$(ARCH)/mach \
-	include/asm-$(ARCH)/.mach
 
-archprepare: include/asm-blackfin/.mach
 archclean:
 	$(Q)$(MAKE) $(clean)=$(boot)
 
-
 INSTALL_PATH ?= /tftpboot
 boot := arch/$(ARCH)/boot
 BOOT_TARGETS = vmImage
diff --git a/arch/blackfin/configs/BF527-EZKIT_defconfig b/arch/blackfin/configs/BF527-EZKIT_defconfig
index 5e6fb9d8e50f..66854a83c0de 100644
--- a/arch/blackfin/configs/BF527-EZKIT_defconfig
+++ b/arch/blackfin/configs/BF527-EZKIT_defconfig
@@ -1,7 +1,6 @@
 #
 # Automatically generated make config: don't edit
 # Linux kernel version: 2.6.24.7
-# Fri May 16 10:02:29 2008
 #
 # CONFIG_MMU is not set
 # CONFIG_FPU is not set
@@ -290,7 +289,7 @@ CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_RESOURCES_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_VIRT_TO_BUS=y
-# CONFIG_BFIN_GPTIMERS is not set
+CONFIG_BFIN_GPTIMERS=y
 CONFIG_BFIN_DMA_5XX=y
 # CONFIG_DMA_UNCACHED_4M is not set
 # CONFIG_DMA_UNCACHED_2M is not set
@@ -430,7 +429,58 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 #
 # CONFIG_NET_PKTGEN is not set
 # CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
+CONFIG_IRDA=m
+
+#
+# IrDA protocols
+#
+CONFIG_IRLAN=m
+CONFIG_IRCOMM=m
+# CONFIG_IRDA_ULTRA is not set
+
+#
+# IrDA options
+#
+# CONFIG_IRDA_CACHE_LAST_LSAP is not set
+# CONFIG_IRDA_FAST_RR is not set
+# CONFIG_IRDA_DEBUG is not set
+
+#
+# Infrared-port device drivers
+#
+
+#
+# SIR device drivers
+#
+CONFIG_IRTTY_SIR=m
+CONFIG_BFIN_SIR=m
+CONFIG_BFIN_SIR0=y
+CONFIG_SIR_BFIN_DMA=y
+# CONFIG_SIR_BFIN_PIO is not set
+
+#
+# Dongle support
+#
+# CONFIG_DONGLE is not set
+# CONFIG_KINGSUN_DONGLE is not set
+# CONFIG_KSDAZZLE_DONGLE is not set
+# CONFIG_KS959_DONGLE is not set
+
+#
+# Old SIR device drivers
+#
+# CONFIG_IRPORT_SIR is not set
+
+#
+# Old Serial dongle support
+#
+
+#
+# FIR device drivers
+#
+# CONFIG_USB_IRDA is not set
+# CONFIG_SIGMATEL_FIR is not set
+# CONFIG_MCS_FIR is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
 
@@ -689,8 +739,11 @@ CONFIG_BFIN_OTP=y
 # CONFIG_BFIN_SPORT is not set
 # CONFIG_BFIN_TIMER_LATENCY is not set
 # CONFIG_TWI_LCD is not set
-# CONFIG_SIMPLE_GPIO is not set
-# CONFIG_VT is not set
+CONFIG_SIMPLE_GPIO=m
+CONFIG_VT=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
 # CONFIG_SERIAL_NONSTANDARD is not set
 
 #
@@ -872,8 +925,36 @@ CONFIG_SSB_POSSIBLE=y
 #
 # CONFIG_VGASTATE is not set
 # CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_SYS_FOPS is not set
+CONFIG_FB_DEFERRED_IO=y
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+CONFIG_FB_BFIN_T350MCQB=y
+# CONFIG_FB_BFIN_7393 is not set
+# CONFIG_FB_S1D13XXX is not set
+# CONFIG_FB_VIRTUAL is not set
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+CONFIG_LCD_CLASS_DEVICE=m
+CONFIG_LCD_LTV350QV=m
+CONFIG_BACKLIGHT_CLASS_DEVICE=m
+# CONFIG_BACKLIGHT_CORGI is not set
 
 #
 # Display device support
@@ -881,9 +962,99 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_DISPLAY_SUPPORT is not set
 
 #
+# Console display driver support
+#
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
+# CONFIG_FONTS is not set
+CONFIG_FONT_8x8=y
+CONFIG_FONT_8x16=y
+CONFIG_LOGO=y
+# CONFIG_LOGO_LINUX_MONO is not set
+# CONFIG_LOGO_LINUX_VGA16 is not set
+# CONFIG_LOGO_LINUX_CLUT224 is not set
+# CONFIG_LOGO_BLACKFIN_VGA16 is not set
+CONFIG_LOGO_BLACKFIN_CLUT224=y
+
+#
 # Sound
 #
-# CONFIG_SOUND is not set
+CONFIG_SOUND=m
+
+#
+# Advanced Linux Sound Architecture
+#
+CONFIG_SND=m
+CONFIG_SND_TIMER=m
+CONFIG_SND_PCM=m
+# CONFIG_SND_SEQUENCER is not set
+# CONFIG_SND_MIXER_OSS is not set
+# CONFIG_SND_PCM_OSS is not set
+# CONFIG_SND_DYNAMIC_MINORS is not set
+CONFIG_SND_SUPPORT_OLD_API=y
+CONFIG_SND_VERBOSE_PROCFS=y
+# CONFIG_SND_VERBOSE_PRINTK is not set
+# CONFIG_SND_DEBUG is not set
+
+#
+# Generic devices
+#
+# CONFIG_SND_DUMMY is not set
+# CONFIG_SND_MTPAV is not set
+# CONFIG_SND_SERIAL_U16550 is not set
+# CONFIG_SND_MPU401 is not set
+
+#
+# SPI devices
+#
+
+#
+# ALSA Blackfin devices
+#
+# CONFIG_SND_BLACKFIN_AD1836 is not set
+# CONFIG_SND_BLACKFIN_AD1836_TDM is not set
+# CONFIG_SND_BLACKFIN_AD1836_I2S is not set
+# CONFIG_SND_BLACKFIN_AD1836_MULSUB is not set
+# CONFIG_SND_BLACKFIN_AD1836_5P1 is not set
+# CONFIG_SND_BFIN_AD73311 is not set
+# CONFIG_SND_BFIN_AD73322 is not set
+
+#
+# USB devices
+#
+# CONFIG_SND_USB_AUDIO is not set
+# CONFIG_SND_USB_CAIAQ is not set
+
+#
+# System on Chip audio support
+#
+CONFIG_SND_SOC_AC97_BUS=y
+CONFIG_SND_SOC=m
+CONFIG_SND_BF5XX_SOC=m
+CONFIG_SND_MMAP_SUPPORT=y
+CONFIG_SND_BF5XX_SOC_I2S=m
+CONFIG_SND_BF5XX_SOC_AC97=m
+# CONFIG_SND_BF5XX_SOC_WM8750 is not set
+# CONFIG_SND_BF5XX_SOC_WM8731 is not set
+CONFIG_SND_BF5XX_SOC_SSM2602=m
+CONFIG_SND_BF5XX_SOC_BF5xx=m
+CONFIG_SND_BF5XX_SPORT_NUM=0
+# CONFIG_SND_BF5XX_HAVE_COLD_RESET is not set
+
+#
+# SoC Audio support for SuperH
+#
+CONFIG_SND_SOC_SSM2602=m
+# CONFIG_SND_SOC_SSM2602_SPI is not set
+CONFIG_SND_SOC_AD1980=m
+
+#
+# Open Sound System
+#
+# CONFIG_SOUND_PRIME is not set
+CONFIG_AC97_BUS=m
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
 # CONFIG_HID_DEBUG is not set
diff --git a/arch/blackfin/configs/BF533-EZKIT_defconfig b/arch/blackfin/configs/BF533-EZKIT_defconfig
index 8d817ba01945..6bc11db12690 100644
--- a/arch/blackfin/configs/BF533-EZKIT_defconfig
+++ b/arch/blackfin/configs/BF533-EZKIT_defconfig
@@ -1,6 +1,6 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.22.16
+# Linux kernel version: 2.6.24.7
 #
 # CONFIG_MMU is not set
 # CONFIG_FPU is not set
@@ -13,35 +13,34 @@ CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_GPIO=y
 CONFIG_FORCE_MAX_ZONEORDER=14
 CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
-# Code maturity level options
+# General setup
 #
 CONFIG_EXPERIMENTAL=y
 CONFIG_BROKEN_ON_SMP=y
 CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
 CONFIG_LOCALVERSION=""
 CONFIG_LOCALVERSION_AUTO=y
 CONFIG_SYSVIPC=y
-# CONFIG_IPC_NS is not set
 CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_POSIX_MQUEUE is not set
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
-# CONFIG_UTS_NS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
 # CONFIG_AUDIT is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+CONFIG_FAIR_GROUP_SCHED=y
+CONFIG_FAIR_USER_SCHED=y
+# CONFIG_FAIR_CGROUP_SCHED is not set
 CONFIG_SYSFS_DEPRECATED=y
 # CONFIG_RELAY is not set
 CONFIG_BLK_DEV_INITRD=y
@@ -64,32 +63,24 @@ CONFIG_EPOLL=y
 CONFIG_SIGNALFD=y
 CONFIG_EVENTFD=y
 CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_BIG_ORDER_ALLOC_NOFAIL_MAGIC=3
-# CONFIG_NP2 is not set
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
+CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 CONFIG_TINY_SHMEM=y
 CONFIG_BASE_SMALL=0
-
-#
-# Loadable module support
-#
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_KMOD=y
-
-#
-# Block layer
-#
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
 
 #
 # IO Schedulers
@@ -141,12 +132,12 @@ CONFIG_BF_REV_0_3=y
 # CONFIG_BF_REV_ANY is not set
 # CONFIG_BF_REV_NONE is not set
 CONFIG_BF53x=y
-CONFIG_BFIN_SINGLE_CORE=y
 CONFIG_MEM_MT48LC16M16A2TG_75=y
 CONFIG_BFIN533_EZKIT=y
 # CONFIG_BFIN533_STAMP is not set
 # CONFIG_BFIN533_BLUETECHNIX_CM is not set
 # CONFIG_H8606_HVSISTEMAS is not set
+# CONFIG_BFIN532_IP0X is not set
 # CONFIG_GENERIC_BF533_BOARD is not set
 
 #
@@ -189,12 +180,14 @@ CONFIG_WDTIMER=13
 # Board customizations
 #
 # CONFIG_CMDLINE_BOOL is not set
+CONFIG_BOOT_LOAD=0x1000
 
 #
 # Clock/PLL Setup
 #
 CONFIG_CLKIN_HZ=27000000
 # CONFIG_BFIN_KERNEL_CLOCK is not set
+CONFIG_MAX_MEM_SIZE=512
 CONFIG_MAX_VCO_HZ=750000000
 CONFIG_MIN_VCO_HZ=50000000
 CONFIG_MAX_SCLK_HZ=133333333
@@ -208,13 +201,17 @@ CONFIG_HZ_250=y
 # CONFIG_HZ_300 is not set
 # CONFIG_HZ_1000 is not set
 CONFIG_HZ=250
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+# CONFIG_CYCLES_CLOCKSOURCE is not set
+CONFIG_TICK_ONESHOT=y
+# CONFIG_NO_HZ is not set
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
 
 #
-# Memory Setup
+# Misc
 #
-CONFIG_MAX_MEM_SIZE=512
-CONFIG_MEM_ADD_WIDTH=9
-CONFIG_BOOT_LOAD=0x1000
 CONFIG_BFIN_SCRATCH_REG_RETN=y
 # CONFIG_BFIN_SCRATCH_REG_RETE is not set
 # CONFIG_BFIN_SCRATCH_REG_CYCLES is not set
@@ -250,12 +247,14 @@ CONFIG_FLATMEM_MANUAL=y
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
 CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_RESOURCES_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
-CONFIG_LARGE_ALLOCS=y
+CONFIG_VIRT_TO_BUS=y
 # CONFIG_BFIN_GPTIMERS is not set
 CONFIG_BFIN_DMA_5XX=y
+# CONFIG_DMA_UNCACHED_4M is not set
 # CONFIG_DMA_UNCACHED_2M is not set
 CONFIG_DMA_UNCACHED_1M=y
 # CONFIG_DMA_UNCACHED_NONE is not set
@@ -293,17 +292,13 @@ CONFIG_C_AMBEN_ALL=y
 CONFIG_BANK_0=0x7BB0
 CONFIG_BANK_1=0x7BB0
 CONFIG_BANK_2=0x7BB0
-CONFIG_BANK_3=0xAAC3
+CONFIG_BANK_3=0xAAC2
 
 #
 # Bus options (PCI, PCMCIA, EISA, MCA, ISA)
 #
 # CONFIG_PCI is not set
 # CONFIG_ARCH_SUPPORTS_MSI is not set
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
 # CONFIG_PCCARD is not set
 
 #
@@ -321,7 +316,9 @@ CONFIG_BINFMT_ZFLAT=y
 CONFIG_PM=y
 # CONFIG_PM_LEGACY is not set
 # CONFIG_PM_DEBUG is not set
-# CONFIG_PM_SYSFS_DEPRECATED is not set
+CONFIG_PM_SLEEP=y
+CONFIG_SUSPEND_UP_POSSIBLE=y
+CONFIG_SUSPEND=y
 CONFIG_PM_BFIN_SLEEP_DEEPER=y
 # CONFIG_PM_BFIN_SLEEP is not set
 # CONFIG_PM_WAKEUP_BY_GPIO is not set
@@ -367,6 +364,7 @@ CONFIG_SYN_COOKIES=y
 CONFIG_INET_XFRM_MODE_TRANSPORT=y
 CONFIG_INET_XFRM_MODE_TUNNEL=y
 CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
 CONFIG_INET_DIAG=y
 CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
@@ -393,10 +391,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
 # CONFIG_NET_SCHED is not set
 
 #
@@ -428,6 +422,7 @@ CONFIG_IRDA_CACHE_LAST_LSAP=y
 # SIR device drivers
 #
 CONFIG_IRTTY_SIR=m
+# CONFIG_BFIN_SIR is not set
 
 #
 # Dongle support
@@ -457,6 +452,7 @@ CONFIG_IRTTY_SIR=m
 # CONFIG_MAC80211 is not set
 # CONFIG_IEEE80211 is not set
 # CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
 
 #
 # Device Drivers
@@ -465,14 +461,11 @@ CONFIG_IRTTY_SIR=m
 #
 # Generic Driver Options
 #
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_FW_LOADER is not set
 # CONFIG_SYS_HYPERVISOR is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
 # CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
 # CONFIG_MTD_DEBUG is not set
@@ -492,6 +485,7 @@ CONFIG_MTD_BLOCK=y
 # CONFIG_INFTL is not set
 # CONFIG_RFD_FTL is not set
 # CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
 
 #
 # RAM/ROM/Flash chip drivers
@@ -548,20 +542,8 @@ CONFIG_MTD_COMPLEX_MAPPINGS=y
 # UBI - Unsorted block images
 #
 # CONFIG_MTD_UBI is not set
-
-#
-# Parallel port support
-#
 # CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-# CONFIG_PNPACPI is not set
-
-#
-# Block devices
-#
+CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_COW_COMMON is not set
 # CONFIG_BLK_DEV_LOOP is not set
 # CONFIG_BLK_DEV_NBD is not set
@@ -571,10 +553,8 @@ CONFIG_BLK_DEV_RAM_SIZE=4096
 CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
-
-#
-# Misc devices
-#
+CONFIG_MISC_DEVICES=y
+# CONFIG_EEPROM_93CX6 is not set
 # CONFIG_IDE is not set
 
 #
@@ -582,32 +562,29 @@ CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
 #
 # CONFIG_RAID_ATTRS is not set
 # CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
 # CONFIG_SCSI_NETLINK is not set
 # CONFIG_ATA is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
 # CONFIG_MD is not set
-
-#
-# Network device support
-#
 CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
 # CONFIG_EQUALIZER is not set
 # CONFIG_TUN is not set
+# CONFIG_VETH is not set
 # CONFIG_PHYLIB is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
 CONFIG_SMC91X=y
 # CONFIG_SMSC911X is not set
 # CONFIG_DM9000 is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_B44 is not set
 CONFIG_NETDEV_1000=y
 # CONFIG_AX88180 is not set
 CONFIG_NETDEV_10000=y
@@ -624,15 +601,7 @@ CONFIG_NETDEV_10000=y
 # CONFIG_NETCONSOLE is not set
 # CONFIG_NETPOLL is not set
 # CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
 # CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
 # CONFIG_PHONE is not set
 
 #
@@ -647,7 +616,6 @@ CONFIG_INPUT=m
 #
 # CONFIG_INPUT_MOUSEDEV is not set
 # CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
 CONFIG_INPUT_EVDEV=m
 # CONFIG_INPUT_EVBUG is not set
 
@@ -672,13 +640,12 @@ CONFIG_INPUT_EVDEV=m
 #
 # CONFIG_AD9960 is not set
 # CONFIG_SPI_ADC_BF533 is not set
-# CONFIG_BF5xx_PFLAGS is not set
 # CONFIG_BF5xx_PPIFCD is not set
 # CONFIG_BFIN_SIMPLE_TIMER is not set
 # CONFIG_BF5xx_PPI is not set
 CONFIG_BFIN_SPORT=y
 # CONFIG_BFIN_TIMER_LATENCY is not set
-# CONFIG_AD5304 is not set
+CONFIG_SIMPLE_GPIO=m
 # CONFIG_VT is not set
 # CONFIG_SERIAL_NONSTANDARD is not set
 
@@ -706,28 +673,11 @@ CONFIG_UNIX98_PTYS=y
 # CAN, the car bus and industrial fieldbus
 #
 # CONFIG_CAN4LINUX is not set
-
-#
-# IPMI
-#
 # CONFIG_IPMI_HANDLER is not set
-CONFIG_WATCHDOG=y
-# CONFIG_WATCHDOG_NOWAYOUT is not set
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
-CONFIG_BFIN_WDT=y
 CONFIG_HW_RANDOM=y
 # CONFIG_GEN_RTC is not set
-CONFIG_BLACKFIN_DPMC=y
 # CONFIG_R3964 is not set
 # CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
 # CONFIG_TCG_TPM is not set
 # CONFIG_I2C is not set
 
@@ -748,22 +698,37 @@ CONFIG_SPI_BFIN=y
 #
 # CONFIG_SPI_AT25 is not set
 # CONFIG_SPI_SPIDEV is not set
-
-#
-# Dallas's 1-wire bus
-#
+# CONFIG_SPI_TLE62X0 is not set
 # CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
 CONFIG_HWMON=y
 # CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_ABITUGURU is not set
 # CONFIG_SENSORS_F71805F is not set
+# CONFIG_SENSORS_F71882FG is not set
+# CONFIG_SENSORS_IT87 is not set
 # CONFIG_SENSORS_LM70 is not set
+# CONFIG_SENSORS_PC87360 is not set
 # CONFIG_SENSORS_PC87427 is not set
 # CONFIG_SENSORS_SMSC47M1 is not set
 # CONFIG_SENSORS_SMSC47B397 is not set
 # CONFIG_SENSORS_VT1211 is not set
 # CONFIG_SENSORS_W83627HF is not set
+# CONFIG_SENSORS_W83627EHF is not set
 # CONFIG_HWMON_DEBUG_CHIP is not set
+CONFIG_WATCHDOG=y
+# CONFIG_WATCHDOG_NOWAYOUT is not set
+
+#
+# Watchdog Device Drivers
+#
+# CONFIG_SOFT_WATCHDOG is not set
+CONFIG_BFIN_WDT=y
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
 
 #
 # Multifunction device drivers
@@ -780,72 +745,27 @@ CONFIG_DAB=y
 #
 # Graphics support
 #
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
 # CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
 # Display device support
 #
 # CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_VGASTATE is not set
-# CONFIG_FB is not set
 
 #
 # Sound
 #
 # CONFIG_SOUND is not set
-
-#
-# HID Devices
-#
+CONFIG_HID_SUPPORT=y
 CONFIG_HID=m
 # CONFIG_HID_DEBUG is not set
-
-#
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-# CONFIG_USB_ARCH_HAS_EHCI is not set
-# CONFIG_USB is not set
-
-#
-# Enable Host or Gadget support to see Inventra options
-#
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
+# CONFIG_HIDRAW is not set
+# CONFIG_USB_SUPPORT is not set
 # CONFIG_MMC is not set
-
-#
-# LED devices
-#
 # CONFIG_NEW_LEDS is not set
-
-#
-# LED drivers
-#
-
-#
-# LED Triggers
-#
-
-#
-# InfiniBand support
-#
-
-#
-# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
-#
-
-#
-# Real Time Clock
-#
 CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
 CONFIG_RTC_HCTOSYS=y
@@ -862,10 +782,6 @@ CONFIG_RTC_INTF_DEV=y
 # CONFIG_RTC_DRV_TEST is not set
 
 #
-# I2C RTC drivers
-#
-
-#
 # SPI RTC drivers
 #
 # CONFIG_RTC_DRV_RS5C348 is not set
@@ -875,8 +791,10 @@ CONFIG_RTC_INTF_DEV=y
 # Platform RTC drivers
 #
 # CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
 # CONFIG_RTC_DRV_DS1742 is not set
 # CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
 # CONFIG_RTC_DRV_V3020 is not set
 
 #
@@ -885,22 +803,9 @@ CONFIG_RTC_INTF_DEV=y
 CONFIG_RTC_DRV_BFIN=y
 
 #
-# DMA Engine support
-#
-# CONFIG_DMA_ENGINE is not set
-
-#
-# DMA Clients
-#
-
-#
-# DMA Devices
+# Userspace I/O
 #
-
-#
-# PBX support
-#
-# CONFIG_PBX is not set
+# CONFIG_UIO is not set
 
 #
 # File systems
@@ -945,7 +850,6 @@ CONFIG_PROC_SYSCTL=y
 CONFIG_SYSFS=y
 # CONFIG_TMPFS is not set
 # CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
 # CONFIG_CONFIGFS_FS is not set
 
 #
@@ -971,10 +875,12 @@ CONFIG_YAFFS_SHORT_NAMES_IN_RAM=y
 CONFIG_JFFS2_FS=m
 CONFIG_JFFS2_FS_DEBUG=0
 CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
 # CONFIG_JFFS2_SUMMARY is not set
 # CONFIG_JFFS2_FS_XATTR is not set
 # CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
 CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
 CONFIG_JFFS2_RTIME=y
 # CONFIG_JFFS2_RUBIN is not set
 # CONFIG_CRAMFS is not set
@@ -983,10 +889,7 @@ CONFIG_JFFS2_RTIME=y
 # CONFIG_QNX4FS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
+CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=m
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
@@ -1006,17 +909,12 @@ CONFIG_SMB_FS=m
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
 # CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
 
 #
 # Partition Types
 #
 # CONFIG_PARTITION_ADVANCED is not set
 CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
 CONFIG_NLS=m
 CONFIG_NLS_DEFAULT="iso8859-1"
 # CONFIG_NLS_CODEPAGE_437 is not set
@@ -1057,21 +955,16 @@ CONFIG_NLS_DEFAULT="iso8859-1"
 # CONFIG_NLS_KOI8_R is not set
 # CONFIG_NLS_KOI8_U is not set
 # CONFIG_NLS_UTF8 is not set
-
-#
-# Distributed Lock Manager
-#
 # CONFIG_DLM is not set
-
-#
-# Profiling support
-#
+CONFIG_INSTRUMENTATION=y
 # CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
 
 #
 # Kernel hacking
 #
 # CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
 # CONFIG_MAGIC_SYSRQ is not set
 # CONFIG_UNUSED_SYMBOLS is not set
@@ -1079,6 +972,7 @@ CONFIG_DEBUG_FS=y
 # CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_SAMPLES is not set
 CONFIG_DEBUG_MMRS=y
 CONFIG_DEBUG_HUNT_FOR_ZERO=y
 CONFIG_DEBUG_BFIN_HWTRACE_ON=y
@@ -1098,11 +992,7 @@ CONFIG_ACCESS_CHECK=y
 # CONFIG_KEYS is not set
 CONFIG_SECURITY=y
 # CONFIG_SECURITY_NETWORK is not set
-CONFIG_SECURITY_CAPABILITIES=m
-
-#
-# Cryptographic options
-#
+# CONFIG_SECURITY_CAPABILITIES is not set
 # CONFIG_CRYPTO is not set
 
 #
@@ -1113,6 +1003,7 @@ CONFIG_CRC_CCITT=m
 # CONFIG_CRC16 is not set
 # CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
 # CONFIG_LIBCRC32C is not set
 CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=m
diff --git a/arch/blackfin/configs/BF533-STAMP_defconfig b/arch/blackfin/configs/BF533-STAMP_defconfig
index 20d598d17bd1..d77d991a1f61 100644
--- a/arch/blackfin/configs/BF533-STAMP_defconfig
+++ b/arch/blackfin/configs/BF533-STAMP_defconfig
@@ -1,6 +1,6 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.22.16
+# Linux kernel version: 2.6.24.7
 #
 # CONFIG_MMU is not set
 # CONFIG_FPU is not set
@@ -13,35 +13,34 @@ CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_GPIO=y
 CONFIG_FORCE_MAX_ZONEORDER=14
 CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
-# Code maturity level options
+# General setup
 #
 CONFIG_EXPERIMENTAL=y
 CONFIG_BROKEN_ON_SMP=y
 CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
 CONFIG_LOCALVERSION=""
 CONFIG_LOCALVERSION_AUTO=y
 CONFIG_SYSVIPC=y
-# CONFIG_IPC_NS is not set
 CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_POSIX_MQUEUE is not set
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
-# CONFIG_UTS_NS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
 # CONFIG_AUDIT is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+CONFIG_FAIR_GROUP_SCHED=y
+CONFIG_FAIR_USER_SCHED=y
+# CONFIG_FAIR_CGROUP_SCHED is not set
 CONFIG_SYSFS_DEPRECATED=y
 # CONFIG_RELAY is not set
 CONFIG_BLK_DEV_INITRD=y
@@ -64,32 +63,24 @@ CONFIG_EPOLL=y
 CONFIG_SIGNALFD=y
 CONFIG_EVENTFD=y
 CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_BIG_ORDER_ALLOC_NOFAIL_MAGIC=3
-# CONFIG_NP2 is not set
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
+CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 CONFIG_TINY_SHMEM=y
 CONFIG_BASE_SMALL=0
-
-#
-# Loadable module support
-#
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_KMOD=y
-
-#
-# Block layer
-#
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
 
 #
 # IO Schedulers
@@ -141,12 +132,12 @@ CONFIG_BF_REV_0_3=y
 # CONFIG_BF_REV_ANY is not set
 # CONFIG_BF_REV_NONE is not set
 CONFIG_BF53x=y
-CONFIG_BFIN_SINGLE_CORE=y
 CONFIG_MEM_MT48LC64M4A2FB_7E=y
 # CONFIG_BFIN533_EZKIT is not set
 CONFIG_BFIN533_STAMP=y
 # CONFIG_BFIN533_BLUETECHNIX_CM is not set
 # CONFIG_H8606_HVSISTEMAS is not set
+# CONFIG_BFIN532_IP0X is not set
 # CONFIG_GENERIC_BF533_BOARD is not set
 
 #
@@ -189,12 +180,14 @@ CONFIG_WDTIMER=13
 # Board customizations
 #
 # CONFIG_CMDLINE_BOOL is not set
+CONFIG_BOOT_LOAD=0x1000
 
 #
 # Clock/PLL Setup
 #
 CONFIG_CLKIN_HZ=11059200
 # CONFIG_BFIN_KERNEL_CLOCK is not set
+CONFIG_MAX_MEM_SIZE=512
 CONFIG_MAX_VCO_HZ=750000000
 CONFIG_MIN_VCO_HZ=50000000
 CONFIG_MAX_SCLK_HZ=133333333
@@ -208,14 +201,17 @@ CONFIG_HZ_250=y
 # CONFIG_HZ_300 is not set
 # CONFIG_HZ_1000 is not set
 CONFIG_HZ=250
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+# CONFIG_CYCLES_CLOCKSOURCE is not set
+CONFIG_TICK_ONESHOT=y
+# CONFIG_NO_HZ is not set
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
 
 #
-# Memory Setup
+# Misc
 #
-CONFIG_MAX_MEM_SIZE=512
-CONFIG_MEM_ADD_WIDTH=11
-CONFIG_ENET_FLASH_PIN=0
-CONFIG_BOOT_LOAD=0x1000
 CONFIG_BFIN_SCRATCH_REG_RETN=y
 # CONFIG_BFIN_SCRATCH_REG_RETE is not set
 # CONFIG_BFIN_SCRATCH_REG_CYCLES is not set
@@ -251,12 +247,14 @@ CONFIG_FLATMEM_MANUAL=y
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
 CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_RESOURCES_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
-CONFIG_LARGE_ALLOCS=y
+CONFIG_VIRT_TO_BUS=y
 # CONFIG_BFIN_GPTIMERS is not set
 CONFIG_BFIN_DMA_5XX=y
+# CONFIG_DMA_UNCACHED_4M is not set
 # CONFIG_DMA_UNCACHED_2M is not set
 CONFIG_DMA_UNCACHED_1M=y
 # CONFIG_DMA_UNCACHED_NONE is not set
@@ -294,17 +292,13 @@ CONFIG_C_AMBEN_ALL=y
 CONFIG_BANK_0=0x7BB0
 CONFIG_BANK_1=0x7BB0
 CONFIG_BANK_2=0x7BB0
-CONFIG_BANK_3=0xAAC3
+CONFIG_BANK_3=0xAAC2
 
 #
 # Bus options (PCI, PCMCIA, EISA, MCA, ISA)
 #
 # CONFIG_PCI is not set
 # CONFIG_ARCH_SUPPORTS_MSI is not set
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
 # CONFIG_PCCARD is not set
 
 #
@@ -322,7 +316,9 @@ CONFIG_BINFMT_ZFLAT=y
 CONFIG_PM=y
 # CONFIG_PM_LEGACY is not set
 # CONFIG_PM_DEBUG is not set
-# CONFIG_PM_SYSFS_DEPRECATED is not set
+CONFIG_PM_SLEEP=y
+CONFIG_SUSPEND_UP_POSSIBLE=y
+CONFIG_SUSPEND=y
 CONFIG_PM_BFIN_SLEEP_DEEPER=y
 # CONFIG_PM_BFIN_SLEEP is not set
 # CONFIG_PM_WAKEUP_BY_GPIO is not set
@@ -368,6 +364,7 @@ CONFIG_SYN_COOKIES=y
 CONFIG_INET_XFRM_MODE_TRANSPORT=y
 CONFIG_INET_XFRM_MODE_TUNNEL=y
 CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
 CONFIG_INET_DIAG=y
 CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
@@ -394,10 +391,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
 # CONFIG_NET_SCHED is not set
 
 #
@@ -429,6 +422,9 @@ CONFIG_IRDA_CACHE_LAST_LSAP=y
 # SIR device drivers
 #
 CONFIG_IRTTY_SIR=m
+CONFIG_BFIN_SIR=m
+CONFIG_SIR_BFIN_DMA=y
+# CONFIG_SIR_BFIN_PIO is not set
 
 #
 # Dongle support
@@ -458,6 +454,7 @@ CONFIG_IRTTY_SIR=m
 # CONFIG_MAC80211 is not set
 # CONFIG_IEEE80211 is not set
 # CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
 
 #
 # Device Drivers
@@ -466,14 +463,11 @@ CONFIG_IRTTY_SIR=m
 #
 # Generic Driver Options
 #
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_FW_LOADER is not set
 # CONFIG_SYS_HYPERVISOR is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
 # CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
 # CONFIG_MTD_DEBUG is not set
@@ -493,6 +487,7 @@ CONFIG_MTD_BLOCK=y
 # CONFIG_INFTL is not set
 # CONFIG_RFD_FTL is not set
 # CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
 
 #
 # RAM/ROM/Flash chip drivers
@@ -524,11 +519,7 @@ CONFIG_MTD_ROM=m
 #
 CONFIG_MTD_COMPLEX_MAPPINGS=y
 # CONFIG_MTD_PHYSMAP is not set
-CONFIG_MTD_BF5xx=m
-CONFIG_BFIN_FLASH_BANK_0=0x7BB0
-CONFIG_BFIN_FLASH_BANK_1=0x7BB0
-CONFIG_BFIN_FLASH_BANK_2=0x7BB0
-CONFIG_BFIN_FLASH_BANK_3=0x7BB0
+CONFIG_MTD_BFIN_ASYNC=m
 # CONFIG_MTD_UCLINUX is not set
 # CONFIG_MTD_PLATRAM is not set
 
@@ -555,20 +546,8 @@ CONFIG_BFIN_FLASH_BANK_3=0x7BB0
 # UBI - Unsorted block images
 #
 # CONFIG_MTD_UBI is not set
-
-#
-# Parallel port support
-#
 # CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-# CONFIG_PNPACPI is not set
-
-#
-# Block devices
-#
+CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_COW_COMMON is not set
 # CONFIG_BLK_DEV_LOOP is not set
 # CONFIG_BLK_DEV_NBD is not set
@@ -578,10 +557,8 @@ CONFIG_BLK_DEV_RAM_SIZE=4096
 CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
-
-#
-# Misc devices
-#
+CONFIG_MISC_DEVICES=y
+# CONFIG_EEPROM_93CX6 is not set
 # CONFIG_IDE is not set
 
 #
@@ -589,32 +566,29 @@ CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
 #
 # CONFIG_RAID_ATTRS is not set
 # CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
 # CONFIG_SCSI_NETLINK is not set
 # CONFIG_ATA is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
 # CONFIG_MD is not set
-
-#
-# Network device support
-#
 CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
 # CONFIG_EQUALIZER is not set
 # CONFIG_TUN is not set
+# CONFIG_VETH is not set
 # CONFIG_PHYLIB is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
 CONFIG_SMC91X=y
 # CONFIG_SMSC911X is not set
 # CONFIG_DM9000 is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_B44 is not set
 CONFIG_NETDEV_1000=y
 # CONFIG_AX88180 is not set
 CONFIG_NETDEV_10000=y
@@ -631,15 +605,7 @@ CONFIG_NETDEV_10000=y
 # CONFIG_NETCONSOLE is not set
 # CONFIG_NETPOLL is not set
 # CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
 # CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
 # CONFIG_PHONE is not set
 
 #
@@ -654,7 +620,6 @@ CONFIG_INPUT=y
 #
 # CONFIG_INPUT_MOUSEDEV is not set
 # CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
 CONFIG_INPUT_EVDEV=m
 # CONFIG_INPUT_EVBUG is not set
 
@@ -667,14 +632,8 @@ CONFIG_INPUT_EVDEV=m
 # CONFIG_INPUT_TABLET is not set
 # CONFIG_INPUT_TOUCHSCREEN is not set
 CONFIG_INPUT_MISC=y
-# CONFIG_INPUT_ATI_REMOTE is not set
-# CONFIG_INPUT_ATI_REMOTE2 is not set
-# CONFIG_INPUT_KEYSPAN_REMOTE is not set
-# CONFIG_INPUT_POWERMATE is not set
-# CONFIG_INPUT_YEALINK is not set
 # CONFIG_INPUT_UINPUT is not set
 CONFIG_TWI_KEYPAD=m
-CONFIG_BFIN_TWIKEYPAD_IRQ_PFX=39
 
 #
 # Hardware I/O ports
@@ -687,15 +646,13 @@ CONFIG_BFIN_TWIKEYPAD_IRQ_PFX=39
 #
 # CONFIG_AD9960 is not set
 # CONFIG_SPI_ADC_BF533 is not set
-# CONFIG_BF5xx_PFLAGS is not set
 # CONFIG_BF5xx_PPIFCD is not set
 # CONFIG_BFIN_SIMPLE_TIMER is not set
 # CONFIG_BF5xx_PPI is not set
 CONFIG_BFIN_SPORT=y
 # CONFIG_BFIN_TIMER_LATENCY is not set
 CONFIG_TWI_LCD=m
-CONFIG_TWI_LCD_SLAVE_ADDR=34
-# CONFIG_AD5304 is not set
+CONFIG_SIMPLE_GPIO=m
 # CONFIG_VT is not set
 # CONFIG_SERIAL_NONSTANDARD is not set
 
@@ -723,28 +680,11 @@ CONFIG_UNIX98_PTYS=y
 # CAN, the car bus and industrial fieldbus
 #
 # CONFIG_CAN4LINUX is not set
-
-#
-# IPMI
-#
 # CONFIG_IPMI_HANDLER is not set
-CONFIG_WATCHDOG=y
-# CONFIG_WATCHDOG_NOWAYOUT is not set
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
-CONFIG_BFIN_WDT=y
 CONFIG_HW_RANDOM=y
 # CONFIG_GEN_RTC is not set
-CONFIG_BLACKFIN_DPMC=y
 # CONFIG_R3964 is not set
 # CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
 # CONFIG_TCG_TPM is not set
 CONFIG_I2C=m
 CONFIG_I2C_BOARDINFO=y
@@ -764,6 +704,7 @@ CONFIG_I2C_ALGOBIT=m
 # CONFIG_I2C_OCORES is not set
 # CONFIG_I2C_PARPORT_LIGHT is not set
 # CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_TAOS_EVM is not set
 # CONFIG_I2C_STUB is not set
 
 #
@@ -771,14 +712,15 @@ CONFIG_I2C_ALGOBIT=m
 #
 # CONFIG_SENSORS_DS1337 is not set
 # CONFIG_SENSORS_DS1374 is not set
+# CONFIG_DS1682 is not set
 # CONFIG_SENSORS_AD5252 is not set
 # CONFIG_SENSORS_EEPROM is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_SENSORS_PCF8575 is not set
-# CONFIG_SENSORS_PCA9543 is not set
 # CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
@@ -801,14 +743,11 @@ CONFIG_SPI_BFIN=y
 #
 # CONFIG_SPI_AT25 is not set
 # CONFIG_SPI_SPIDEV is not set
-
-#
-# Dallas's 1-wire bus
-#
+# CONFIG_SPI_TLE62X0 is not set
 # CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
 CONFIG_HWMON=y
 # CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_ABITUGURU is not set
 # CONFIG_SENSORS_AD7418 is not set
 # CONFIG_SENSORS_ADM1021 is not set
 # CONFIG_SENSORS_ADM1025 is not set
@@ -816,12 +755,12 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_ADM1029 is not set
 # CONFIG_SENSORS_ADM1031 is not set
 # CONFIG_SENSORS_ADM9240 is not set
-# CONFIG_SENSORS_ASB100 is not set
+# CONFIG_SENSORS_ADT7470 is not set
 # CONFIG_SENSORS_ATXP1 is not set
 # CONFIG_SENSORS_DS1621 is not set
 # CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_FSCHER is not set
-# CONFIG_SENSORS_FSCPOS is not set
+# CONFIG_SENSORS_F71882FG is not set
+# CONFIG_SENSORS_F75375S is not set
 # CONFIG_SENSORS_GL518SM is not set
 # CONFIG_SENSORS_GL520SM is not set
 # CONFIG_SENSORS_IT87 is not set
@@ -836,13 +775,16 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_LM87 is not set
 # CONFIG_SENSORS_LM90 is not set
 # CONFIG_SENSORS_LM92 is not set
+# CONFIG_SENSORS_LM93 is not set
 # CONFIG_SENSORS_MAX1619 is not set
 # CONFIG_SENSORS_MAX6650 is not set
 # CONFIG_SENSORS_PC87360 is not set
 # CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_DME1737 is not set
 # CONFIG_SENSORS_SMSC47M1 is not set
 # CONFIG_SENSORS_SMSC47M192 is not set
 # CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_THMC50 is not set
 # CONFIG_SENSORS_VT1211 is not set
 # CONFIG_SENSORS_W83781D is not set
 # CONFIG_SENSORS_W83791D is not set
@@ -852,6 +794,20 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_W83627HF is not set
 # CONFIG_SENSORS_W83627EHF is not set
 # CONFIG_HWMON_DEBUG_CHIP is not set
+CONFIG_WATCHDOG=y
+# CONFIG_WATCHDOG_NOWAYOUT is not set
+
+#
+# Watchdog Device Drivers
+#
+# CONFIG_SOFT_WATCHDOG is not set
+CONFIG_BFIN_WDT=y
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
 
 #
 # Multifunction device drivers
@@ -863,24 +819,20 @@ CONFIG_HWMON=y
 #
 # CONFIG_VIDEO_DEV is not set
 # CONFIG_DVB_CORE is not set
-CONFIG_DAB=y
+# CONFIG_DAB is not set
 
 #
 # Graphics support
 #
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
 # CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
 CONFIG_FB=m
 CONFIG_FIRMWARE_EDID=y
 # CONFIG_FB_DDC is not set
 CONFIG_FB_CFB_FILLRECT=m
 CONFIG_FB_CFB_COPYAREA=m
 CONFIG_FB_CFB_IMAGEBLIT=m
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
 # CONFIG_FB_SYS_FILLRECT is not set
 # CONFIG_FB_SYS_COPYAREA is not set
 # CONFIG_FB_SYS_IMAGEBLIT is not set
@@ -895,7 +847,7 @@ CONFIG_FB_DEFERRED_IO=y
 #
 # Frame buffer hardware drivers
 #
-CONFIG_FB_BFIN_7171=m
+# CONFIG_FB_BFIN_T350MCQB is not set
 CONFIG_FB_BFIN_7393=m
 CONFIG_NTSC=y
 # CONFIG_PAL is not set
@@ -905,9 +857,14 @@ CONFIG_NTSC=y
 # CONFIG_PAL_YCBCR is not set
 CONFIG_ADV7393_1XMEM=y
 # CONFIG_ADV7393_2XMEM is not set
-# CONFIG_FB_BFIN_T350MCQB is not set
 # CONFIG_FB_S1D13XXX is not set
 # CONFIG_FB_VIRTUAL is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
 # CONFIG_LOGO is not set
 
 #
@@ -941,6 +898,10 @@ CONFIG_SND_VERBOSE_PROCFS=y
 # CONFIG_SND_MPU401 is not set
 
 #
+# SPI devices
+#
+
+#
 # ALSA Blackfin devices
 #
 CONFIG_SND_BLACKFIN_AD1836=m
@@ -953,69 +914,43 @@ CONFIG_SND_BLACKFIN_SPI_PFBIT=4
 CONFIG_SND_BFIN_AD73311=m
 CONFIG_SND_BFIN_SPORT=0
 CONFIG_SND_BFIN_AD73311_SE=4
+CONFIG_SND_BFIN_AD73322=m
+CONFIG_SND_BFIN_AD73322_SPORT0_SE=10
+CONFIG_SND_BFIN_AD73322_SPORT1_SE=14
+CONFIG_SND_BFIN_AD73322_RESET=12
 
 #
 # System on Chip audio support
 #
-# CONFIG_SND_SOC is not set
+CONFIG_SND_SOC_AC97_BUS=y
+CONFIG_SND_SOC=m
+CONFIG_SND_BF5XX_SOC=m
+CONFIG_SND_MMAP_SUPPORT=y
+CONFIG_SND_BF5XX_SOC_AC97=m
+# CONFIG_SND_BF5XX_SOC_WM8750 is not set
+# CONFIG_SND_BF5XX_SOC_WM8731 is not set
+# CONFIG_SND_BF5XX_SOC_SSM2602 is not set
+CONFIG_SND_BF5XX_SOC_BF5xx=m
+CONFIG_SND_BF5XX_SPORT_NUM=0
+# CONFIG_SND_BF5XX_HAVE_COLD_RESET is not set
 
 #
-# Open Sound System
+# SoC Audio support for SuperH
 #
-# CONFIG_SOUND_PRIME is not set
+CONFIG_SND_SOC_AD1980=m
 
 #
-# HID Devices
+# Open Sound System
 #
+# CONFIG_SOUND_PRIME is not set
+CONFIG_AC97_BUS=m
+CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
 # CONFIG_HID_DEBUG is not set
-
-#
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-# CONFIG_USB_ARCH_HAS_EHCI is not set
-# CONFIG_USB is not set
-
-#
-# Enable Host or Gadget support to see Inventra options
-#
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
+# CONFIG_HIDRAW is not set
+# CONFIG_USB_SUPPORT is not set
 # CONFIG_MMC is not set
-
-#
-# LED devices
-#
 # CONFIG_NEW_LEDS is not set
-
-#
-# LED drivers
-#
-
-#
-# LED Triggers
-#
-
-#
-# InfiniBand support
-#
-
-#
-# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
-#
-
-#
-# Real Time Clock
-#
 CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
 CONFIG_RTC_HCTOSYS=y
@@ -1035,6 +970,7 @@ CONFIG_RTC_INTF_DEV=y
 # I2C RTC drivers
 #
 # CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1374 is not set
 # CONFIG_RTC_DRV_DS1672 is not set
 # CONFIG_RTC_DRV_MAX6900 is not set
 # CONFIG_RTC_DRV_RS5C372 is not set
@@ -1042,6 +978,7 @@ CONFIG_RTC_INTF_DEV=y
 # CONFIG_RTC_DRV_X1205 is not set
 # CONFIG_RTC_DRV_PCF8563 is not set
 # CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
 
 #
 # SPI RTC drivers
@@ -1053,8 +990,10 @@ CONFIG_RTC_INTF_DEV=y
 # Platform RTC drivers
 #
 # CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
 # CONFIG_RTC_DRV_DS1742 is not set
 # CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
 # CONFIG_RTC_DRV_V3020 is not set
 
 #
@@ -1063,22 +1002,9 @@ CONFIG_RTC_INTF_DEV=y
 CONFIG_RTC_DRV_BFIN=y
 
 #
-# DMA Engine support
+# Userspace I/O
 #
-# CONFIG_DMA_ENGINE is not set
-
-#
-# DMA Clients
-#
-
-#
-# DMA Devices
-#
-
-#
-# PBX support
-#
-# CONFIG_PBX is not set
+# CONFIG_UIO is not set
 
 #
 # File systems
@@ -1123,7 +1049,6 @@ CONFIG_PROC_SYSCTL=y
 CONFIG_SYSFS=y
 # CONFIG_TMPFS is not set
 # CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
 # CONFIG_CONFIGFS_FS is not set
 
 #
@@ -1149,10 +1074,12 @@ CONFIG_YAFFS_SHORT_NAMES_IN_RAM=y
 CONFIG_JFFS2_FS=m
 CONFIG_JFFS2_FS_DEBUG=0
 CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
 # CONFIG_JFFS2_SUMMARY is not set
 # CONFIG_JFFS2_FS_XATTR is not set
 # CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
 CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
 CONFIG_JFFS2_RTIME=y
 # CONFIG_JFFS2_RUBIN is not set
 # CONFIG_CRAMFS is not set
@@ -1161,10 +1088,7 @@ CONFIG_JFFS2_RTIME=y
 # CONFIG_QNX4FS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
+CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=m
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
@@ -1184,17 +1108,12 @@ CONFIG_SMB_FS=m
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
 # CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
 
 #
 # Partition Types
 #
 # CONFIG_PARTITION_ADVANCED is not set
 CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
 CONFIG_NLS=m
 CONFIG_NLS_DEFAULT="iso8859-1"
 # CONFIG_NLS_CODEPAGE_437 is not set
@@ -1235,21 +1154,16 @@ CONFIG_NLS_DEFAULT="iso8859-1"
 # CONFIG_NLS_KOI8_R is not set
 # CONFIG_NLS_KOI8_U is not set
 # CONFIG_NLS_UTF8 is not set
-
-#
-# Distributed Lock Manager
-#
 # CONFIG_DLM is not set
-
-#
-# Profiling support
-#
+CONFIG_INSTRUMENTATION=y
 # CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
 
 #
 # Kernel hacking
 #
 # CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
 # CONFIG_MAGIC_SYSRQ is not set
 # CONFIG_UNUSED_SYMBOLS is not set
@@ -1257,6 +1171,7 @@ CONFIG_DEBUG_FS=y
 # CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_SAMPLES is not set
 CONFIG_DEBUG_MMRS=y
 CONFIG_DEBUG_HUNT_FOR_ZERO=y
 CONFIG_DEBUG_BFIN_HWTRACE_ON=y
@@ -1276,11 +1191,7 @@ CONFIG_ACCESS_CHECK=y
 # CONFIG_KEYS is not set
 CONFIG_SECURITY=y
 # CONFIG_SECURITY_NETWORK is not set
-CONFIG_SECURITY_CAPABILITIES=m
-
-#
-# Cryptographic options
-#
+# CONFIG_SECURITY_CAPABILITIES is not set
 # CONFIG_CRYPTO is not set
 
 #
@@ -1291,6 +1202,7 @@ CONFIG_CRC_CCITT=m
 # CONFIG_CRC16 is not set
 # CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
 # CONFIG_LIBCRC32C is not set
 CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=m
diff --git a/arch/blackfin/configs/BF537-STAMP_defconfig b/arch/blackfin/configs/BF537-STAMP_defconfig
index b5189c8ba263..5fd7c4b143df 100644
--- a/arch/blackfin/configs/BF537-STAMP_defconfig
+++ b/arch/blackfin/configs/BF537-STAMP_defconfig
@@ -1,6 +1,6 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.22.16
+# Linux kernel version: 2.6.24.7
 #
 # CONFIG_MMU is not set
 # CONFIG_FPU is not set
@@ -13,35 +13,34 @@ CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_GPIO=y
 CONFIG_FORCE_MAX_ZONEORDER=14
 CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
-# Code maturity level options
+# General setup
 #
 CONFIG_EXPERIMENTAL=y
 CONFIG_BROKEN_ON_SMP=y
 CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
 CONFIG_LOCALVERSION=""
 CONFIG_LOCALVERSION_AUTO=y
 CONFIG_SYSVIPC=y
-# CONFIG_IPC_NS is not set
 CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_POSIX_MQUEUE is not set
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
-# CONFIG_UTS_NS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
 # CONFIG_AUDIT is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+CONFIG_FAIR_GROUP_SCHED=y
+CONFIG_FAIR_USER_SCHED=y
+# CONFIG_FAIR_CGROUP_SCHED is not set
 CONFIG_SYSFS_DEPRECATED=y
 # CONFIG_RELAY is not set
 CONFIG_BLK_DEV_INITRD=y
@@ -64,32 +63,24 @@ CONFIG_EPOLL=y
 CONFIG_SIGNALFD=y
 CONFIG_EVENTFD=y
 CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_BIG_ORDER_ALLOC_NOFAIL_MAGIC=3
-# CONFIG_NP2 is not set
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
+CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 CONFIG_TINY_SHMEM=y
 CONFIG_BASE_SMALL=0
-
-#
-# Loadable module support
-#
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_KMOD=y
-
-#
-# Block layer
-#
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
 
 #
 # IO Schedulers
@@ -141,7 +132,6 @@ CONFIG_BF_REV_0_2=y
 # CONFIG_BF_REV_ANY is not set
 # CONFIG_BF_REV_NONE is not set
 CONFIG_BF53x=y
-CONFIG_BFIN_SINGLE_CORE=y
 CONFIG_MEM_MT48LC32M8A2_75=y
 CONFIG_IRQ_PLL_WAKEUP=7
 CONFIG_IRQ_RTC=8
@@ -197,12 +187,14 @@ CONFIG_IRQ_PROG_INTA=12
 # Board customizations
 #
 # CONFIG_CMDLINE_BOOL is not set
+CONFIG_BOOT_LOAD=0x1000
 
 #
 # Clock/PLL Setup
 #
 CONFIG_CLKIN_HZ=25000000
 # CONFIG_BFIN_KERNEL_CLOCK is not set
+CONFIG_MAX_MEM_SIZE=512
 CONFIG_MAX_VCO_HZ=600000000
 CONFIG_MIN_VCO_HZ=50000000
 CONFIG_MAX_SCLK_HZ=133333333
@@ -216,13 +208,17 @@ CONFIG_HZ_250=y
 # CONFIG_HZ_300 is not set
 # CONFIG_HZ_1000 is not set
 CONFIG_HZ=250
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+# CONFIG_CYCLES_CLOCKSOURCE is not set
+CONFIG_TICK_ONESHOT=y
+# CONFIG_NO_HZ is not set
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
 
 #
-# Memory Setup
+# Misc
 #
-CONFIG_MAX_MEM_SIZE=512
-CONFIG_MEM_ADD_WIDTH=10
-CONFIG_BOOT_LOAD=0x1000
 CONFIG_BFIN_SCRATCH_REG_RETN=y
 # CONFIG_BFIN_SCRATCH_REG_RETE is not set
 # CONFIG_BFIN_SCRATCH_REG_CYCLES is not set
@@ -258,12 +254,14 @@ CONFIG_FLATMEM_MANUAL=y
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
 CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_RESOURCES_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
-CONFIG_LARGE_ALLOCS=y
+CONFIG_VIRT_TO_BUS=y
 # CONFIG_BFIN_GPTIMERS is not set
 CONFIG_BFIN_DMA_5XX=y
+# CONFIG_DMA_UNCACHED_4M is not set
 # CONFIG_DMA_UNCACHED_2M is not set
 CONFIG_DMA_UNCACHED_1M=y
 # CONFIG_DMA_UNCACHED_NONE is not set
@@ -301,17 +299,13 @@ CONFIG_C_AMBEN_ALL=y
 CONFIG_BANK_0=0x7BB0
 CONFIG_BANK_1=0x7BB0
 CONFIG_BANK_2=0x7BB0
-CONFIG_BANK_3=0x99B3
+CONFIG_BANK_3=0x99B2
 
 #
 # Bus options (PCI, PCMCIA, EISA, MCA, ISA)
 #
 # CONFIG_PCI is not set
 # CONFIG_ARCH_SUPPORTS_MSI is not set
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
 # CONFIG_PCCARD is not set
 
 #
@@ -329,7 +323,9 @@ CONFIG_BINFMT_ZFLAT=y
 CONFIG_PM=y
 # CONFIG_PM_LEGACY is not set
 # CONFIG_PM_DEBUG is not set
-# CONFIG_PM_SYSFS_DEPRECATED is not set
+CONFIG_PM_SLEEP=y
+CONFIG_SUSPEND_UP_POSSIBLE=y
+CONFIG_SUSPEND=y
 CONFIG_PM_BFIN_SLEEP_DEEPER=y
 # CONFIG_PM_BFIN_SLEEP is not set
 # CONFIG_PM_WAKEUP_BY_GPIO is not set
@@ -375,6 +371,7 @@ CONFIG_SYN_COOKIES=y
 CONFIG_INET_XFRM_MODE_TRANSPORT=y
 CONFIG_INET_XFRM_MODE_TUNNEL=y
 CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
 CONFIG_INET_DIAG=y
 CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
@@ -401,10 +398,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
 # CONFIG_NET_SCHED is not set
 
 #
@@ -436,6 +429,10 @@ CONFIG_IRDA_CACHE_LAST_LSAP=y
 # SIR device drivers
 #
 CONFIG_IRTTY_SIR=m
+CONFIG_BFIN_SIR=m
+CONFIG_BFIN_SIR1=y
+CONFIG_SIR_BFIN_DMA=y
+# CONFIG_SIR_BFIN_PIO is not set
 
 #
 # Dongle support
@@ -465,6 +462,7 @@ CONFIG_IRTTY_SIR=m
 # CONFIG_MAC80211 is not set
 # CONFIG_IEEE80211 is not set
 # CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
 
 #
 # Device Drivers
@@ -473,14 +471,11 @@ CONFIG_IRTTY_SIR=m
 #
 # Generic Driver Options
 #
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_FW_LOADER is not set
 # CONFIG_SYS_HYPERVISOR is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
 # CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
 # CONFIG_MTD_DEBUG is not set
@@ -500,6 +495,7 @@ CONFIG_MTD_BLOCK=y
 # CONFIG_INFTL is not set
 # CONFIG_RFD_FTL is not set
 # CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
 
 #
 # RAM/ROM/Flash chip drivers
@@ -572,20 +568,8 @@ CONFIG_MTD_NAND_IDS=m
 # UBI - Unsorted block images
 #
 # CONFIG_MTD_UBI is not set
-
-#
-# Parallel port support
-#
 # CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-# CONFIG_PNPACPI is not set
-
-#
-# Block devices
-#
+CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_COW_COMMON is not set
 # CONFIG_BLK_DEV_LOOP is not set
 # CONFIG_BLK_DEV_NBD is not set
@@ -595,10 +579,8 @@ CONFIG_BLK_DEV_RAM_SIZE=4096
 CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
-
-#
-# Misc devices
-#
+CONFIG_MISC_DEVICES=y
+# CONFIG_EEPROM_93CX6 is not set
 # CONFIG_IDE is not set
 
 #
@@ -606,22 +588,18 @@ CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
 #
 # CONFIG_RAID_ATTRS is not set
 # CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
 # CONFIG_SCSI_NETLINK is not set
 # CONFIG_ATA is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
 # CONFIG_MD is not set
-
-#
-# Network device support
-#
 CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
 # CONFIG_EQUALIZER is not set
 # CONFIG_TUN is not set
+# CONFIG_VETH is not set
 CONFIG_PHYLIB=y
 
 #
@@ -635,21 +613,24 @@ CONFIG_PHYLIB=y
 # CONFIG_VITESSE_PHY is not set
 CONFIG_SMSC_PHY=y
 # CONFIG_BROADCOM_PHY is not set
+# CONFIG_ICPLUS_PHY is not set
 # CONFIG_FIXED_PHY is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
+# CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
-# CONFIG_SMC91X is not set
 CONFIG_BFIN_MAC=y
 CONFIG_BFIN_MAC_USE_L1=y
 CONFIG_BFIN_TX_DESC_NUM=10
 CONFIG_BFIN_RX_DESC_NUM=20
 # CONFIG_BFIN_MAC_RMII is not set
+# CONFIG_SMC91X is not set
 # CONFIG_SMSC911X is not set
 # CONFIG_DM9000 is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_B44 is not set
 CONFIG_NETDEV_1000=y
 # CONFIG_AX88180 is not set
 CONFIG_NETDEV_10000=y
@@ -666,15 +647,7 @@ CONFIG_NETDEV_10000=y
 # CONFIG_NETCONSOLE is not set
 # CONFIG_NETPOLL is not set
 # CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
 # CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
 # CONFIG_PHONE is not set
 
 #
@@ -689,7 +662,6 @@ CONFIG_INPUT=y
 #
 # CONFIG_INPUT_MOUSEDEV is not set
 # CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
 CONFIG_INPUT_EVDEV=m
 # CONFIG_INPUT_EVBUG is not set
 
@@ -702,14 +674,8 @@ CONFIG_INPUT_EVDEV=m
 # CONFIG_INPUT_TABLET is not set
 # CONFIG_INPUT_TOUCHSCREEN is not set
 CONFIG_INPUT_MISC=y
-# CONFIG_INPUT_ATI_REMOTE is not set
-# CONFIG_INPUT_ATI_REMOTE2 is not set
-# CONFIG_INPUT_KEYSPAN_REMOTE is not set
-# CONFIG_INPUT_POWERMATE is not set
-# CONFIG_INPUT_YEALINK is not set
 # CONFIG_INPUT_UINPUT is not set
 CONFIG_TWI_KEYPAD=m
-CONFIG_BFIN_TWIKEYPAD_IRQ_PFX=72
 
 #
 # Hardware I/O ports
@@ -722,15 +688,13 @@ CONFIG_BFIN_TWIKEYPAD_IRQ_PFX=72
 #
 # CONFIG_AD9960 is not set
 # CONFIG_SPI_ADC_BF533 is not set
-# CONFIG_BF5xx_PFLAGS is not set
 # CONFIG_BF5xx_PPIFCD is not set
 # CONFIG_BFIN_SIMPLE_TIMER is not set
 # CONFIG_BF5xx_PPI is not set
 CONFIG_BFIN_SPORT=y
 # CONFIG_BFIN_TIMER_LATENCY is not set
 CONFIG_TWI_LCD=m
-CONFIG_TWI_LCD_SLAVE_ADDR=34
-# CONFIG_AD5304 is not set
+CONFIG_SIMPLE_GPIO=m
 # CONFIG_VT is not set
 # CONFIG_SERIAL_NONSTANDARD is not set
 
@@ -766,28 +730,11 @@ CONFIG_CAN4LINUX=y
 # CONFIG_CAN_MCF5282 is not set
 # CONFIG_CAN_UNCTWINCAN is not set
 CONFIG_CAN_BLACKFIN=m
-
-#
-# IPMI
-#
 # CONFIG_IPMI_HANDLER is not set
-CONFIG_WATCHDOG=y
-# CONFIG_WATCHDOG_NOWAYOUT is not set
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
-CONFIG_BFIN_WDT=y
 CONFIG_HW_RANDOM=y
 # CONFIG_GEN_RTC is not set
-CONFIG_BLACKFIN_DPMC=y
 # CONFIG_R3964 is not set
 # CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
 # CONFIG_TCG_TPM is not set
 CONFIG_I2C=m
 CONFIG_I2C_BOARDINFO=y
@@ -809,6 +756,7 @@ CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ=50
 # CONFIG_I2C_OCORES is not set
 # CONFIG_I2C_PARPORT_LIGHT is not set
 # CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_TAOS_EVM is not set
 # CONFIG_I2C_STUB is not set
 
 #
@@ -816,14 +764,15 @@ CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ=50
 #
 # CONFIG_SENSORS_DS1337 is not set
 # CONFIG_SENSORS_DS1374 is not set
+# CONFIG_DS1682 is not set
 CONFIG_SENSORS_AD5252=m
 # CONFIG_SENSORS_EEPROM is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_SENSORS_PCF8575 is not set
-# CONFIG_SENSORS_PCA9543 is not set
 # CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
@@ -846,14 +795,11 @@ CONFIG_SPI_BFIN=y
 #
 # CONFIG_SPI_AT25 is not set
 # CONFIG_SPI_SPIDEV is not set
-
-#
-# Dallas's 1-wire bus
-#
+# CONFIG_SPI_TLE62X0 is not set
 # CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
 CONFIG_HWMON=y
 # CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_ABITUGURU is not set
 # CONFIG_SENSORS_AD7418 is not set
 # CONFIG_SENSORS_ADM1021 is not set
 # CONFIG_SENSORS_ADM1025 is not set
@@ -861,12 +807,12 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_ADM1029 is not set
 # CONFIG_SENSORS_ADM1031 is not set
 # CONFIG_SENSORS_ADM9240 is not set
-# CONFIG_SENSORS_ASB100 is not set
+# CONFIG_SENSORS_ADT7470 is not set
 # CONFIG_SENSORS_ATXP1 is not set
 # CONFIG_SENSORS_DS1621 is not set
 # CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_FSCHER is not set
-# CONFIG_SENSORS_FSCPOS is not set
+# CONFIG_SENSORS_F71882FG is not set
+# CONFIG_SENSORS_F75375S is not set
 # CONFIG_SENSORS_GL518SM is not set
 # CONFIG_SENSORS_GL520SM is not set
 # CONFIG_SENSORS_IT87 is not set
@@ -881,13 +827,16 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_LM87 is not set
 # CONFIG_SENSORS_LM90 is not set
 # CONFIG_SENSORS_LM92 is not set
+# CONFIG_SENSORS_LM93 is not set
 # CONFIG_SENSORS_MAX1619 is not set
 # CONFIG_SENSORS_MAX6650 is not set
 # CONFIG_SENSORS_PC87360 is not set
 # CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_DME1737 is not set
 # CONFIG_SENSORS_SMSC47M1 is not set
 # CONFIG_SENSORS_SMSC47M192 is not set
 # CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_THMC50 is not set
 # CONFIG_SENSORS_VT1211 is not set
 # CONFIG_SENSORS_W83781D is not set
 # CONFIG_SENSORS_W83791D is not set
@@ -897,6 +846,20 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_W83627HF is not set
 # CONFIG_SENSORS_W83627EHF is not set
 # CONFIG_HWMON_DEBUG_CHIP is not set
+CONFIG_WATCHDOG=y
+# CONFIG_WATCHDOG_NOWAYOUT is not set
+
+#
+# Watchdog Device Drivers
+#
+# CONFIG_SOFT_WATCHDOG is not set
+CONFIG_BFIN_WDT=y
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
 
 #
 # Multifunction device drivers
@@ -913,21 +876,15 @@ CONFIG_DAB=y
 #
 # Graphics support
 #
-CONFIG_BACKLIGHT_LCD_SUPPORT=y
-CONFIG_BACKLIGHT_CLASS_DEVICE=m
-CONFIG_LCD_CLASS_DEVICE=m
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
 # CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
 CONFIG_FB=m
 CONFIG_FIRMWARE_EDID=y
 # CONFIG_FB_DDC is not set
 CONFIG_FB_CFB_FILLRECT=m
 CONFIG_FB_CFB_COPYAREA=m
 CONFIG_FB_CFB_IMAGEBLIT=m
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
 # CONFIG_FB_SYS_FILLRECT is not set
 # CONFIG_FB_SYS_COPYAREA is not set
 # CONFIG_FB_SYS_IMAGEBLIT is not set
@@ -942,7 +899,8 @@ CONFIG_FB_DEFERRED_IO=y
 #
 # Frame buffer hardware drivers
 #
-CONFIG_FB_BFIN_7171=m
+# CONFIG_FB_HITACHI_TX09 is not set
+# CONFIG_FB_BFIN_T350MCQB is not set
 CONFIG_FB_BFIN_7393=m
 CONFIG_NTSC=y
 # CONFIG_PAL is not set
@@ -956,10 +914,18 @@ CONFIG_FB_BF537_LQ035=m
 CONFIG_LQ035_SLAVE_ADDR=0x58
 # CONFIG_FB_BFIN_LANDSCAPE is not set
 # CONFIG_FB_BFIN_BGR is not set
-# CONFIG_FB_BFIN_T350MCQB is not set
-# CONFIG_FB_HITACHI_TX09 is not set
 # CONFIG_FB_S1D13XXX is not set
 # CONFIG_FB_VIRTUAL is not set
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+CONFIG_LCD_CLASS_DEVICE=m
+# CONFIG_LCD_LTV350QV is not set
+CONFIG_BACKLIGHT_CLASS_DEVICE=m
+CONFIG_BACKLIGHT_CORGI=m
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
 # CONFIG_LOGO is not set
 
 #
@@ -993,6 +959,10 @@ CONFIG_SND_VERBOSE_PROCFS=y
 # CONFIG_SND_MPU401 is not set
 
 #
+# SPI devices
+#
+
+#
 # ALSA Blackfin devices
 #
 CONFIG_SND_BLACKFIN_AD1836=m
@@ -1005,6 +975,10 @@ CONFIG_SND_BLACKFIN_SPI_PFBIT=4
 CONFIG_SND_BFIN_AD73311=m
 CONFIG_SND_BFIN_SPORT=0
 CONFIG_SND_BFIN_AD73311_SE=4
+CONFIG_SND_BFIN_AD73322=m
+CONFIG_SND_BFIN_AD73322_SPORT0_SE=10
+CONFIG_SND_BFIN_AD73322_SPORT1_SE=14
+CONFIG_SND_BFIN_AD73322_RESET=12
 
 #
 # System on Chip audio support
@@ -1016,9 +990,14 @@ CONFIG_SND_MMAP_SUPPORT=y
 CONFIG_SND_BF5XX_SOC_AC97=m
 # CONFIG_SND_BF5XX_SOC_WM8750 is not set
 # CONFIG_SND_BF5XX_SOC_WM8731 is not set
+# CONFIG_SND_BF5XX_SOC_SSM2602 is not set
 CONFIG_SND_BF5XX_SOC_BF5xx=m
 CONFIG_SND_BF5XX_SPORT_NUM=0
 # CONFIG_SND_BF5XX_HAVE_COLD_RESET is not set
+
+#
+# SoC Audio support for SuperH
+#
 CONFIG_SND_SOC_AD1980=m
 
 #
@@ -1026,59 +1005,18 @@ CONFIG_SND_SOC_AD1980=m
 #
 # CONFIG_SOUND_PRIME is not set
 CONFIG_AC97_BUS=m
-
-#
-# HID Devices
-#
+CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
 # CONFIG_HID_DEBUG is not set
-
-#
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-# CONFIG_USB_ARCH_HAS_EHCI is not set
-# CONFIG_USB is not set
-
-#
-# Enable Host or Gadget support to see Inventra options
-#
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
+# CONFIG_HIDRAW is not set
+# CONFIG_USB_SUPPORT is not set
+# CONFIG_NO_DUMMY_DELAY is not set
+# CONFIG_DUMMY_DELAY_BANK0 is not set
+# CONFIG_DUMMY_DELAY_BANK1 is not set
+# CONFIG_DUMMY_DELAY_BANK2 is not set
+# CONFIG_DUMMY_DELAY_BANK3 is not set
 # CONFIG_MMC is not set
-
-#
-# LED devices
-#
 # CONFIG_NEW_LEDS is not set
-
-#
-# LED drivers
-#
-
-#
-# LED Triggers
-#
-
-#
-# InfiniBand support
-#
-
-#
-# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
-#
-
-#
-# Real Time Clock
-#
 CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
 CONFIG_RTC_HCTOSYS=y
@@ -1098,6 +1036,7 @@ CONFIG_RTC_INTF_DEV=y
 # I2C RTC drivers
 #
 # CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1374 is not set
 # CONFIG_RTC_DRV_DS1672 is not set
 # CONFIG_RTC_DRV_MAX6900 is not set
 # CONFIG_RTC_DRV_RS5C372 is not set
@@ -1105,6 +1044,7 @@ CONFIG_RTC_INTF_DEV=y
 # CONFIG_RTC_DRV_X1205 is not set
 # CONFIG_RTC_DRV_PCF8563 is not set
 # CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
 
 #
 # SPI RTC drivers
@@ -1116,8 +1056,10 @@ CONFIG_RTC_INTF_DEV=y
 # Platform RTC drivers
 #
 # CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
 # CONFIG_RTC_DRV_DS1742 is not set
 # CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
 # CONFIG_RTC_DRV_V3020 is not set
 
 #
@@ -1126,22 +1068,9 @@ CONFIG_RTC_INTF_DEV=y
 CONFIG_RTC_DRV_BFIN=y
 
 #
-# DMA Engine support
+# Userspace I/O
 #
-# CONFIG_DMA_ENGINE is not set
-
-#
-# DMA Clients
-#
-
-#
-# DMA Devices
-#
-
-#
-# PBX support
-#
-# CONFIG_PBX is not set
+# CONFIG_UIO is not set
 
 #
 # File systems
@@ -1186,7 +1115,6 @@ CONFIG_PROC_SYSCTL=y
 CONFIG_SYSFS=y
 # CONFIG_TMPFS is not set
 # CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
 # CONFIG_CONFIGFS_FS is not set
 
 #
@@ -1212,10 +1140,12 @@ CONFIG_YAFFS_SHORT_NAMES_IN_RAM=y
 CONFIG_JFFS2_FS=m
 CONFIG_JFFS2_FS_DEBUG=0
 CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
 # CONFIG_JFFS2_SUMMARY is not set
 # CONFIG_JFFS2_FS_XATTR is not set
 # CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
 CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
 CONFIG_JFFS2_RTIME=y
 # CONFIG_JFFS2_RUBIN is not set
 # CONFIG_CRAMFS is not set
@@ -1224,10 +1154,7 @@ CONFIG_JFFS2_RTIME=y
 # CONFIG_QNX4FS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
+CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=m
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
@@ -1247,17 +1174,12 @@ CONFIG_SMB_FS=m
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
 # CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
 
 #
 # Partition Types
 #
 # CONFIG_PARTITION_ADVANCED is not set
 CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
 CONFIG_NLS=m
 CONFIG_NLS_DEFAULT="iso8859-1"
 # CONFIG_NLS_CODEPAGE_437 is not set
@@ -1298,21 +1220,16 @@ CONFIG_NLS_DEFAULT="iso8859-1"
 # CONFIG_NLS_KOI8_R is not set
 # CONFIG_NLS_KOI8_U is not set
 # CONFIG_NLS_UTF8 is not set
-
-#
-# Distributed Lock Manager
-#
 # CONFIG_DLM is not set
-
-#
-# Profiling support
-#
+CONFIG_INSTRUMENTATION=y
 # CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
 
 #
 # Kernel hacking
 #
 # CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
 # CONFIG_MAGIC_SYSRQ is not set
 # CONFIG_UNUSED_SYMBOLS is not set
@@ -1320,6 +1237,7 @@ CONFIG_DEBUG_FS=y
 # CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_SAMPLES is not set
 CONFIG_DEBUG_MMRS=y
 CONFIG_DEBUG_HUNT_FOR_ZERO=y
 CONFIG_DEBUG_BFIN_HWTRACE_ON=y
@@ -1339,11 +1257,7 @@ CONFIG_ACCESS_CHECK=y
 # CONFIG_KEYS is not set
 CONFIG_SECURITY=y
 # CONFIG_SECURITY_NETWORK is not set
-CONFIG_SECURITY_CAPABILITIES=m
-
-#
-# Cryptographic options
-#
+# CONFIG_SECURITY_CAPABILITIES is not set
 # CONFIG_CRYPTO is not set
 
 #
@@ -1354,6 +1268,7 @@ CONFIG_CRC_CCITT=m
 # CONFIG_CRC16 is not set
 # CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
 # CONFIG_LIBCRC32C is not set
 CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=m
diff --git a/arch/blackfin/configs/BF548-EZKIT_defconfig b/arch/blackfin/configs/BF548-EZKIT_defconfig
index 1ff2ff4b49aa..390669e8668e 100644
--- a/arch/blackfin/configs/BF548-EZKIT_defconfig
+++ b/arch/blackfin/configs/BF548-EZKIT_defconfig
@@ -365,7 +365,7 @@ CONFIG_C_AMBEN_ALL=y
 CONFIG_BANK_0=0x7BB0
 CONFIG_BANK_1=0x5554
 CONFIG_BANK_2=0x7BB0
-CONFIG_BANK_3=0x99B3
+CONFIG_BANK_3=0x99B2
 CONFIG_EBIU_MBSCTLVAL=0x0
 CONFIG_EBIU_MODEVAL=0x1
 CONFIG_EBIU_FCTLVAL=0x6
@@ -468,7 +468,60 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 #
 # CONFIG_NET_PKTGEN is not set
 # CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
+CONFIG_IRDA=m
+
+#
+# IrDA protocols
+#
+CONFIG_IRLAN=m
+CONFIG_IRCOMM=m
+# CONFIG_IRDA_ULTRA is not set
+
+#
+# IrDA options
+#
+# CONFIG_IRDA_CACHE_LAST_LSAP is not set
+# CONFIG_IRDA_FAST_RR is not set
+# CONFIG_IRDA_DEBUG is not set
+
+#
+# Infrared-port device drivers
+#
+
+#
+# SIR device drivers
+#
+CONFIG_IRTTY_SIR=m
+CONFIG_BFIN_SIR=m
+# CONFIG_BFIN_SIR0 is not set
+# CONFIG_BFIN_SIR2 is not set
+CONFIG_BFIN_SIR3=y
+CONFIG_SIR_BFIN_DMA=y
+# CONFIG_SIR_BFIN_PIO is not set
+
+#
+# Dongle support
+#
+# CONFIG_DONGLE is not set
+# CONFIG_KINGSUN_DONGLE is not set
+# CONFIG_KSDAZZLE_DONGLE is not set
+# CONFIG_KS959_DONGLE is not set
+
+#
+# Old SIR device drivers
+#
+# CONFIG_IRPORT_SIR is not set
+
+#
+# Old Serial dongle support
+#
+
+#
+# FIR device drivers
+#
+# CONFIG_USB_IRDA is not set
+# CONFIG_SIGMATEL_FIR is not set
+# CONFIG_MCS_FIR is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
 
@@ -575,6 +628,7 @@ CONFIG_MTD_NAND=y
 CONFIG_MTD_NAND_IDS=y
 CONFIG_MTD_NAND_BF5XX=y
 CONFIG_MTD_NAND_BF5XX_HWECC=y
+# CONFIG_MTD_NAND_BF5XX_BOOTROM_ECC is not set
 # CONFIG_MTD_NAND_DISKONCHIP is not set
 # CONFIG_MTD_NAND_NANDSIM is not set
 # CONFIG_MTD_NAND_PLATFORM is not set
@@ -766,7 +820,7 @@ CONFIG_BFIN_OTP=y
 # CONFIG_BFIN_SPORT is not set
 # CONFIG_BFIN_TIMER_LATENCY is not set
 # CONFIG_TWI_LCD is not set
-# CONFIG_SIMPLE_GPIO is not set
+CONFIG_SIMPLE_GPIO=m
 CONFIG_VT=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
@@ -1071,6 +1125,7 @@ CONFIG_SND_BF5XX_SOC_AC97=y
 CONFIG_SND_BF5XX_SOC_BF548_EZKIT=y
 # CONFIG_SND_BF5XX_SOC_WM8750 is not set
 # CONFIG_SND_BF5XX_SOC_WM8731 is not set
+# CONFIG_SND_BF5XX_SOC_SSM2602 is not set
 CONFIG_SND_BF5XX_SPORT_NUM=0
 CONFIG_SND_BF5XX_HAVE_COLD_RESET=y
 CONFIG_SND_BF5XX_RESET_GPIO_NUM=19
@@ -1133,7 +1188,7 @@ CONFIG_USB_MUSB_HOST=y
 # CONFIG_USB_MUSB_OTG is not set
 CONFIG_USB_MUSB_HDRC_HCD=y
 # CONFIG_MUSB_PIO_ONLY is not set
-# CONFIG_USB_INVENTRA_DMA is not set
+CONFIG_USB_INVENTRA_DMA=y
 # CONFIG_USB_TI_CPPI_DMA is not set
 CONFIG_USB_MUSB_LOGLEVEL=0
 
@@ -1312,7 +1367,7 @@ CONFIG_FS_MBCACHE=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
+# CONFIG_DNOTIFY is not set
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
 # CONFIG_FUSE_FS is not set
diff --git a/arch/blackfin/configs/BF561-EZKIT_defconfig b/arch/blackfin/configs/BF561-EZKIT_defconfig
index b4a20c890816..976a4d7ba175 100644
--- a/arch/blackfin/configs/BF561-EZKIT_defconfig
+++ b/arch/blackfin/configs/BF561-EZKIT_defconfig
@@ -1,6 +1,6 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.22.16
+# Linux kernel version: 2.6.24.7
 #
 # CONFIG_MMU is not set
 # CONFIG_FPU is not set
@@ -13,35 +13,34 @@ CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_GPIO=y
 CONFIG_FORCE_MAX_ZONEORDER=14
 CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
-# Code maturity level options
+# General setup
 #
 CONFIG_EXPERIMENTAL=y
 CONFIG_BROKEN_ON_SMP=y
 CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
 CONFIG_LOCALVERSION=""
 CONFIG_LOCALVERSION_AUTO=y
 CONFIG_SYSVIPC=y
-# CONFIG_IPC_NS is not set
 CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_POSIX_MQUEUE is not set
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
-# CONFIG_UTS_NS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
 # CONFIG_AUDIT is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+CONFIG_FAIR_GROUP_SCHED=y
+CONFIG_FAIR_USER_SCHED=y
+# CONFIG_FAIR_CGROUP_SCHED is not set
 CONFIG_SYSFS_DEPRECATED=y
 # CONFIG_RELAY is not set
 CONFIG_BLK_DEV_INITRD=y
@@ -64,32 +63,24 @@ CONFIG_EPOLL=y
 CONFIG_SIGNALFD=y
 CONFIG_EVENTFD=y
 CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_BIG_ORDER_ALLOC_NOFAIL_MAGIC=3
-# CONFIG_NP2 is not set
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
+CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 CONFIG_TINY_SHMEM=y
 CONFIG_BASE_SMALL=0
-
-#
-# Loadable module support
-#
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_KMOD=y
-
-#
-# Block layer
-#
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
 
 #
 # IO Schedulers
@@ -140,7 +131,6 @@ CONFIG_BF_REV_0_3=y
 # CONFIG_BF_REV_0_5 is not set
 # CONFIG_BF_REV_ANY is not set
 # CONFIG_BF_REV_NONE is not set
-CONFIG_BFIN_DUAL_CORE=y
 CONFIG_MEM_MT48LC16M16A2TG_75=y
 CONFIG_IRQ_PLL_WAKEUP=7
 CONFIG_IRQ_SPORT0_ERROR=7
@@ -233,12 +223,14 @@ CONFIG_IRQ_WDTIMER=13
 # Board customizations
 #
 # CONFIG_CMDLINE_BOOL is not set
+CONFIG_BOOT_LOAD=0x1000
 
 #
 # Clock/PLL Setup
 #
 CONFIG_CLKIN_HZ=30000000
 # CONFIG_BFIN_KERNEL_CLOCK is not set
+CONFIG_MAX_MEM_SIZE=512
 CONFIG_MAX_VCO_HZ=600000000
 CONFIG_MIN_VCO_HZ=50000000
 CONFIG_MAX_SCLK_HZ=133333333
@@ -252,13 +244,17 @@ CONFIG_HZ_250=y
 # CONFIG_HZ_300 is not set
 # CONFIG_HZ_1000 is not set
 CONFIG_HZ=250
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+# CONFIG_CYCLES_CLOCKSOURCE is not set
+CONFIG_TICK_ONESHOT=y
+# CONFIG_NO_HZ is not set
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
 
 #
-# Memory Setup
+# Misc
 #
-CONFIG_MAX_MEM_SIZE=512
-CONFIG_MEM_ADD_WIDTH=9
-CONFIG_BOOT_LOAD=0x1000
 CONFIG_BFIN_SCRATCH_REG_RETN=y
 # CONFIG_BFIN_SCRATCH_REG_RETE is not set
 # CONFIG_BFIN_SCRATCH_REG_CYCLES is not set
@@ -294,12 +290,14 @@ CONFIG_FLATMEM_MANUAL=y
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
 CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_RESOURCES_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
-CONFIG_LARGE_ALLOCS=y
+CONFIG_VIRT_TO_BUS=y
 # CONFIG_BFIN_GPTIMERS is not set
 CONFIG_BFIN_DMA_5XX=y
+# CONFIG_DMA_UNCACHED_4M is not set
 # CONFIG_DMA_UNCACHED_2M is not set
 CONFIG_DMA_UNCACHED_1M=y
 # CONFIG_DMA_UNCACHED_NONE is not set
@@ -341,17 +339,13 @@ CONFIG_C_AMBEN_ALL=y
 CONFIG_BANK_0=0x7BB0
 CONFIG_BANK_1=0x7BB0
 CONFIG_BANK_2=0x7BB0
-CONFIG_BANK_3=0xAAC3
+CONFIG_BANK_3=0xAAC2
 
 #
 # Bus options (PCI, PCMCIA, EISA, MCA, ISA)
 #
 # CONFIG_PCI is not set
 # CONFIG_ARCH_SUPPORTS_MSI is not set
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
 # CONFIG_PCCARD is not set
 
 #
@@ -367,9 +361,15 @@ CONFIG_BINFMT_ZFLAT=y
 # Power management options
 #
 # CONFIG_PM is not set
+CONFIG_SUSPEND_UP_POSSIBLE=y
 # CONFIG_PM_WAKEUP_BY_GPIO is not set
 
 #
+# CPU Frequency scaling
+#
+# CONFIG_CPU_FREQ is not set
+
+#
 # Networking
 #
 CONFIG_NET=y
@@ -405,6 +405,7 @@ CONFIG_SYN_COOKIES=y
 CONFIG_INET_XFRM_MODE_TRANSPORT=y
 CONFIG_INET_XFRM_MODE_TUNNEL=y
 CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
 CONFIG_INET_DIAG=y
 CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
@@ -431,10 +432,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
 # CONFIG_NET_SCHED is not set
 
 #
@@ -466,6 +463,7 @@ CONFIG_IRDA_CACHE_LAST_LSAP=y
 # SIR device drivers
 #
 CONFIG_IRTTY_SIR=m
+# CONFIG_BFIN_SIR is not set
 
 #
 # Dongle support
@@ -495,6 +493,7 @@ CONFIG_IRTTY_SIR=m
 # CONFIG_MAC80211 is not set
 # CONFIG_IEEE80211 is not set
 # CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
 
 #
 # Device Drivers
@@ -503,14 +502,11 @@ CONFIG_IRTTY_SIR=m
 #
 # Generic Driver Options
 #
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_FW_LOADER is not set
 # CONFIG_SYS_HYPERVISOR is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
 # CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
 # CONFIG_MTD_DEBUG is not set
@@ -530,6 +526,7 @@ CONFIG_MTD_BLOCK=y
 # CONFIG_INFTL is not set
 # CONFIG_RFD_FTL is not set
 # CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
 
 #
 # RAM/ROM/Flash chip drivers
@@ -590,20 +587,8 @@ CONFIG_MTD_PHYSMAP_BANKWIDTH=2
 # UBI - Unsorted block images
 #
 # CONFIG_MTD_UBI is not set
-
-#
-# Parallel port support
-#
 # CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-# CONFIG_PNPACPI is not set
-
-#
-# Block devices
-#
+CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_COW_COMMON is not set
 # CONFIG_BLK_DEV_LOOP is not set
 # CONFIG_BLK_DEV_NBD is not set
@@ -613,10 +598,8 @@ CONFIG_BLK_DEV_RAM_SIZE=4096
 CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
-
-#
-# Misc devices
-#
+CONFIG_MISC_DEVICES=y
+# CONFIG_EEPROM_93CX6 is not set
 # CONFIG_IDE is not set
 
 #
@@ -624,32 +607,29 @@ CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
 #
 # CONFIG_RAID_ATTRS is not set
 # CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
 # CONFIG_SCSI_NETLINK is not set
 # CONFIG_ATA is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
 # CONFIG_MD is not set
-
-#
-# Network device support
-#
 CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
 # CONFIG_EQUALIZER is not set
 # CONFIG_TUN is not set
+# CONFIG_VETH is not set
 # CONFIG_PHYLIB is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
 CONFIG_SMC91X=y
 # CONFIG_SMSC911X is not set
 # CONFIG_DM9000 is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_B44 is not set
 CONFIG_NETDEV_1000=y
 # CONFIG_AX88180 is not set
 CONFIG_NETDEV_10000=y
@@ -666,15 +646,7 @@ CONFIG_NETDEV_10000=y
 # CONFIG_NETCONSOLE is not set
 # CONFIG_NETPOLL is not set
 # CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
 # CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
 # CONFIG_PHONE is not set
 
 #
@@ -689,7 +661,6 @@ CONFIG_INPUT=m
 #
 # CONFIG_INPUT_MOUSEDEV is not set
 # CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
 CONFIG_INPUT_EVDEV=m
 # CONFIG_INPUT_EVBUG is not set
 
@@ -714,13 +685,12 @@ CONFIG_INPUT_EVDEV=m
 #
 # CONFIG_AD9960 is not set
 # CONFIG_SPI_ADC_BF533 is not set
-# CONFIG_BF5xx_PFLAGS is not set
 # CONFIG_BF5xx_PPIFCD is not set
 # CONFIG_BFIN_SIMPLE_TIMER is not set
 # CONFIG_BF5xx_PPI is not set
 # CONFIG_BFIN_SPORT is not set
 # CONFIG_BFIN_TIMER_LATENCY is not set
-# CONFIG_AD5304 is not set
+CONFIG_SIMPLE_GPIO=m
 # CONFIG_VT is not set
 # CONFIG_SERIAL_NONSTANDARD is not set
 
@@ -748,27 +718,11 @@ CONFIG_UNIX98_PTYS=y
 # CAN, the car bus and industrial fieldbus
 #
 # CONFIG_CAN4LINUX is not set
-
-#
-# IPMI
-#
 # CONFIG_IPMI_HANDLER is not set
-CONFIG_WATCHDOG=y
-# CONFIG_WATCHDOG_NOWAYOUT is not set
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
-CONFIG_BFIN_WDT=y
 CONFIG_HW_RANDOM=y
 # CONFIG_GEN_RTC is not set
 # CONFIG_R3964 is not set
 # CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
 # CONFIG_TCG_TPM is not set
 # CONFIG_I2C is not set
 
@@ -789,22 +743,37 @@ CONFIG_SPI_BFIN=y
 #
 # CONFIG_SPI_AT25 is not set
 # CONFIG_SPI_SPIDEV is not set
-
-#
-# Dallas's 1-wire bus
-#
+# CONFIG_SPI_TLE62X0 is not set
 # CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
 CONFIG_HWMON=y
 # CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_ABITUGURU is not set
 # CONFIG_SENSORS_F71805F is not set
+# CONFIG_SENSORS_F71882FG is not set
+# CONFIG_SENSORS_IT87 is not set
 # CONFIG_SENSORS_LM70 is not set
+# CONFIG_SENSORS_PC87360 is not set
 # CONFIG_SENSORS_PC87427 is not set
 # CONFIG_SENSORS_SMSC47M1 is not set
 # CONFIG_SENSORS_SMSC47B397 is not set
 # CONFIG_SENSORS_VT1211 is not set
 # CONFIG_SENSORS_W83627HF is not set
+# CONFIG_SENSORS_W83627EHF is not set
 # CONFIG_HWMON_DEBUG_CHIP is not set
+CONFIG_WATCHDOG=y
+# CONFIG_WATCHDOG_NOWAYOUT is not set
+
+#
+# Watchdog Device Drivers
+#
+# CONFIG_SOFT_WATCHDOG is not set
+CONFIG_BFIN_WDT=y
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
 
 #
 # Multifunction device drivers
@@ -821,91 +790,33 @@ CONFIG_DAB=y
 #
 # Graphics support
 #
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
 # CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
 # Display device support
 #
 # CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_VGASTATE is not set
-# CONFIG_FB is not set
 
 #
 # Sound
 #
 # CONFIG_SOUND is not set
-
-#
-# HID Devices
-#
+CONFIG_HID_SUPPORT=y
 CONFIG_HID=m
 # CONFIG_HID_DEBUG is not set
-
-#
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-# CONFIG_USB_ARCH_HAS_EHCI is not set
-# CONFIG_USB is not set
-
-#
-# Enable Host or Gadget support to see Inventra options
-#
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
+# CONFIG_HIDRAW is not set
+# CONFIG_USB_SUPPORT is not set
 # CONFIG_MMC is not set
-
-#
-# LED devices
-#
 # CONFIG_NEW_LEDS is not set
-
-#
-# LED drivers
-#
-
-#
-# LED Triggers
-#
-
-#
-# InfiniBand support
-#
-
-#
-# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
-#
-
-#
-# Real Time Clock
-#
 # CONFIG_RTC_CLASS is not set
 
 #
-# DMA Engine support
-#
-# CONFIG_DMA_ENGINE is not set
-
-#
-# DMA Clients
-#
-
-#
-# DMA Devices
+# Userspace I/O
 #
-
-#
-# PBX support
-#
-# CONFIG_PBX is not set
+# CONFIG_UIO is not set
 
 #
 # File systems
@@ -950,7 +861,6 @@ CONFIG_PROC_SYSCTL=y
 CONFIG_SYSFS=y
 # CONFIG_TMPFS is not set
 # CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
 # CONFIG_CONFIGFS_FS is not set
 
 #
@@ -976,10 +886,12 @@ CONFIG_YAFFS_SHORT_NAMES_IN_RAM=y
 CONFIG_JFFS2_FS=m
 CONFIG_JFFS2_FS_DEBUG=0
 CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
 # CONFIG_JFFS2_SUMMARY is not set
 # CONFIG_JFFS2_FS_XATTR is not set
 # CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
 CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
 CONFIG_JFFS2_RTIME=y
 # CONFIG_JFFS2_RUBIN is not set
 # CONFIG_CRAMFS is not set
@@ -988,10 +900,7 @@ CONFIG_JFFS2_RTIME=y
 # CONFIG_QNX4FS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
+CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=m
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
@@ -1011,17 +920,12 @@ CONFIG_SMB_FS=m
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
 # CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
 
 #
 # Partition Types
 #
 # CONFIG_PARTITION_ADVANCED is not set
 CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
 CONFIG_NLS=m
 CONFIG_NLS_DEFAULT="iso8859-1"
 # CONFIG_NLS_CODEPAGE_437 is not set
@@ -1062,21 +966,16 @@ CONFIG_NLS_DEFAULT="iso8859-1"
 # CONFIG_NLS_KOI8_R is not set
 # CONFIG_NLS_KOI8_U is not set
 # CONFIG_NLS_UTF8 is not set
-
-#
-# Distributed Lock Manager
-#
 # CONFIG_DLM is not set
-
-#
-# Profiling support
-#
+CONFIG_INSTRUMENTATION=y
 # CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
 
 #
 # Kernel hacking
 #
 # CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
 # CONFIG_MAGIC_SYSRQ is not set
 # CONFIG_UNUSED_SYMBOLS is not set
@@ -1084,6 +983,7 @@ CONFIG_DEBUG_FS=y
 # CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_SAMPLES is not set
 CONFIG_DEBUG_MMRS=y
 CONFIG_DEBUG_HUNT_FOR_ZERO=y
 CONFIG_DEBUG_BFIN_HWTRACE_ON=y
@@ -1104,11 +1004,7 @@ CONFIG_ACCESS_CHECK=y
 # CONFIG_KEYS is not set
 CONFIG_SECURITY=y
 # CONFIG_SECURITY_NETWORK is not set
-CONFIG_SECURITY_CAPABILITIES=m
-
-#
-# Cryptographic options
-#
+# CONFIG_SECURITY_CAPABILITIES is not set
 # CONFIG_CRYPTO is not set
 
 #
@@ -1119,6 +1015,7 @@ CONFIG_CRC_CCITT=m
 # CONFIG_CRC16 is not set
 # CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
 # CONFIG_LIBCRC32C is not set
 CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=m
diff --git a/arch/blackfin/configs/BlackStamp_defconfig b/arch/blackfin/configs/BlackStamp_defconfig
new file mode 100644
index 000000000000..2921f9952d5f
--- /dev/null
+++ b/arch/blackfin/configs/BlackStamp_defconfig
@@ -0,0 +1,1195 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.26.2
+#
+# CONFIG_MMU is not set
+# CONFIG_FPU is not set
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
+CONFIG_BLACKFIN=y
+CONFIG_ZONE_DMA=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_FORCE_MAX_ZONEORDER=14
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+# CONFIG_GROUP_SCHED is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
+CONFIG_EMBEDDED=y
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_HAVE_KPROBES is not set
+# CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_DMA_ATTRS is not set
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_TINY_SHMEM=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODULE_FORCE_UNLOAD=y
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+# CONFIG_IOSCHED_DEADLINE is not set
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_CLASSIC_RCU=y
+# CONFIG_PREEMPT_NONE is not set
+CONFIG_PREEMPT_VOLUNTARY=y
+# CONFIG_PREEMPT is not set
+
+#
+# Blackfin Processor Options
+#
+
+#
+# Processor and Board Settings
+#
+# CONFIG_BF522 is not set
+# CONFIG_BF523 is not set
+# CONFIG_BF524 is not set
+# CONFIG_BF525 is not set
+# CONFIG_BF526 is not set
+# CONFIG_BF527 is not set
+# CONFIG_BF531 is not set
+CONFIG_BF532=y
+# CONFIG_BF533 is not set
+# CONFIG_BF534 is not set
+# CONFIG_BF536 is not set
+# CONFIG_BF537 is not set
+# CONFIG_BF542 is not set
+# CONFIG_BF544 is not set
+# CONFIG_BF547 is not set
+# CONFIG_BF548 is not set
+# CONFIG_BF549 is not set
+# CONFIG_BF561 is not set
+# CONFIG_BF_REV_0_0 is not set
+# CONFIG_BF_REV_0_1 is not set
+# CONFIG_BF_REV_0_2 is not set
+# CONFIG_BF_REV_0_3 is not set
+# CONFIG_BF_REV_0_4 is not set
+CONFIG_BF_REV_0_5=y
+# CONFIG_BF_REV_ANY is not set
+# CONFIG_BF_REV_NONE is not set
+CONFIG_BF53x=y
+CONFIG_MEM_MT48LC32M16A2TG_75=y
+# CONFIG_BFIN533_EZKIT is not set
+# CONFIG_BFIN533_STAMP is not set
+# CONFIG_BFIN533_BLUETECHNIX_CM is not set
+# CONFIG_H8606_HVSISTEMAS is not set
+# CONFIG_BFIN532_IP0X is not set
+CONFIG_BLACKSTAMP=y
+# CONFIG_GENERIC_BF533_BOARD is not set
+
+#
+# BF533/2/1 Specific Configuration
+#
+
+#
+# Interrupt Priority Assignment
+#
+
+#
+# Priority
+#
+CONFIG_UART_ERROR=7
+CONFIG_SPORT0_ERROR=7
+CONFIG_SPI_ERROR=7
+CONFIG_SPORT1_ERROR=7
+CONFIG_PPI_ERROR=7
+CONFIG_DMA_ERROR=7
+CONFIG_PLLWAKE_ERROR=7
+CONFIG_RTC_ERROR=8
+CONFIG_DMA0_PPI=8
+CONFIG_DMA1_SPORT0RX=9
+CONFIG_DMA2_SPORT0TX=9
+CONFIG_DMA3_SPORT1RX=9
+CONFIG_DMA4_SPORT1TX=9
+CONFIG_DMA5_SPI=10
+CONFIG_DMA6_UARTRX=10
+CONFIG_DMA7_UARTTX=10
+CONFIG_TIMER0=11
+CONFIG_TIMER1=11
+CONFIG_TIMER2=11
+CONFIG_PFA=12
+CONFIG_PFB=12
+CONFIG_MEMDMA0=13
+CONFIG_MEMDMA1=13
+CONFIG_WDTIMER=13
+
+#
+# Board customizations
+#
+# CONFIG_CMDLINE_BOOL is not set
+CONFIG_BOOT_LOAD=0x1000
+
+#
+# Clock/PLL Setup
+#
+CONFIG_CLKIN_HZ=25000000
+# CONFIG_BFIN_KERNEL_CLOCK is not set
+# CONFIG_PLL_BYPASS is not set
+# CONFIG_CLKIN_HALF is not set
+CONFIG_VCO_MULT=16
+CONFIG_CCLK_DIV_1=y
+# CONFIG_CCLK_DIV_2 is not set
+# CONFIG_CCLK_DIV_4 is not set
+# CONFIG_CCLK_DIV_8 is not set
+CONFIG_SCLK_DIV=3
+CONFIG_MAX_MEM_SIZE=64
+CONFIG_MAX_VCO_HZ=400000000
+CONFIG_MIN_VCO_HZ=50000000
+CONFIG_MAX_SCLK_HZ=133333333
+CONFIG_MIN_SCLK_HZ=27000000
+
+#
+# Kernel Timer/Scheduler
+#
+# CONFIG_HZ_100 is not set
+CONFIG_HZ_250=y
+# CONFIG_HZ_300 is not set
+# CONFIG_HZ_1000 is not set
+CONFIG_HZ=250
+# CONFIG_SCHED_HRTICK is not set
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+# CONFIG_CYCLES_CLOCKSOURCE is not set
+CONFIG_TICK_ONESHOT=y
+# CONFIG_NO_HZ is not set
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+
+#
+# Memory Setup
+#
+
+#
+# Misc
+#
+CONFIG_BFIN_SCRATCH_REG_RETN=y
+# CONFIG_BFIN_SCRATCH_REG_RETE is not set
+# CONFIG_BFIN_SCRATCH_REG_CYCLES is not set
+
+#
+# Blackfin Kernel Optimizations
+#
+
+#
+# Memory Optimizations
+#
+CONFIG_I_ENTRY_L1=y
+CONFIG_EXCPT_IRQ_SYSC_L1=y
+CONFIG_DO_IRQ_L1=y
+CONFIG_CORE_TIMER_IRQ_L1=y
+CONFIG_IDLE_L1=y
+CONFIG_SCHEDULE_L1=y
+CONFIG_ARITHMETIC_OPS_L1=y
+CONFIG_ACCESS_OK_L1=y
+CONFIG_MEMSET_L1=y
+CONFIG_MEMCPY_L1=y
+CONFIG_SYS_BFIN_SPINLOCK_L1=y
+# CONFIG_IP_CHECKSUM_L1 is not set
+CONFIG_CACHELINE_ALIGNED_L1=y
+# CONFIG_SYSCALL_TAB_L1 is not set
+# CONFIG_CPLB_SWITCH_TAB_L1 is not set
+# CONFIG_RAMKERNEL is not set
+CONFIG_ROMKERNEL=y
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_VIRT_TO_BUS=y
+CONFIG_BFIN_GPTIMERS=y
+CONFIG_BFIN_DMA_5XX=y
+# CONFIG_DMA_UNCACHED_4M is not set
+# CONFIG_DMA_UNCACHED_2M is not set
+CONFIG_DMA_UNCACHED_1M=y
+# CONFIG_DMA_UNCACHED_NONE is not set
+
+#
+# Cache Support
+#
+CONFIG_BFIN_ICACHE=y
+CONFIG_BFIN_DCACHE=y
+# CONFIG_BFIN_DCACHE_BANKA is not set
+# CONFIG_BFIN_ICACHE_LOCK is not set
+# CONFIG_BFIN_WB is not set
+CONFIG_BFIN_WT=y
+# CONFIG_MPU is not set
+
+#
+# Asynchonous Memory Configuration
+#
+
+#
+# EBIU_AMGCTL Global Control
+#
+CONFIG_C_AMCKEN=y
+CONFIG_C_CDPRIO=y
+# CONFIG_C_AMBEN is not set
+# CONFIG_C_AMBEN_B0 is not set
+# CONFIG_C_AMBEN_B0_B1 is not set
+# CONFIG_C_AMBEN_B0_B1_B2 is not set
+CONFIG_C_AMBEN_ALL=y
+
+#
+# EBIU_AMBCTL Control
+#
+CONFIG_BANK_0=0x7BB0
+CONFIG_BANK_1=0x7BB0
+CONFIG_BANK_2=0x7BB0
+CONFIG_BANK_3=0xAAC2
+
+#
+# Bus options (PCI, PCMCIA, EISA, MCA, ISA)
+#
+# CONFIG_PCI is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Executable file formats
+#
+CONFIG_BINFMT_ELF_FDPIC=y
+CONFIG_BINFMT_FLAT=y
+CONFIG_BINFMT_ZFLAT=y
+CONFIG_BINFMT_SHARED_FLAT=y
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options
+#
+CONFIG_PM=y
+# CONFIG_PM_DEBUG is not set
+CONFIG_PM_SLEEP=y
+CONFIG_SUSPEND=y
+CONFIG_SUSPEND_FREEZER=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_PM_BFIN_SLEEP_DEEPER=y
+# CONFIG_PM_BFIN_SLEEP is not set
+# CONFIG_PM_WAKEUP_BY_GPIO is not set
+
+#
+# Possible Suspend Mem / Hibernate Wake-Up Sources
+#
+
+#
+# CPU Frequency scaling
+#
+# CONFIG_CPU_FREQ is not set
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+# CONFIG_IP_PNP_DHCP is not set
+# CONFIG_IP_PNP_BOOTP is not set
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+CONFIG_SYN_COOKIES=y
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETLABEL is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
+# CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_FW_LOADER is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=m
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=m
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=m
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_CFI_INTELEXT is not set
+CONFIG_MTD_CFI_AMDSTD=m
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=m
+CONFIG_MTD_RAM=y
+CONFIG_MTD_ROM=m
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+CONFIG_MTD_COMPLEX_MAPPINGS=y
+# CONFIG_MTD_PHYSMAP is not set
+# CONFIG_MTD_GPIO_ADDR is not set
+# CONFIG_MTD_UCLINUX is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_DATAFLASH is not set
+CONFIG_MTD_M25P80=y
+# CONFIG_M25PXX_USE_FAST_READ is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+# CONFIG_MTD_NAND is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+CONFIG_BLK_DEV_NBD=y
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=4096
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+# CONFIG_PHYLIB is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+CONFIG_SMC91X=y
+# CONFIG_SMSC911X is not set
+# CONFIG_DM9000 is not set
+# CONFIG_ENC28J60 is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_B44 is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
+# CONFIG_WAN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_JOYDEV is not set
+CONFIG_INPUT_EVDEV=m
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+# CONFIG_AD9960 is not set
+# CONFIG_SPI_ADC_BF533 is not set
+# CONFIG_BF5xx_PPIFCD is not set
+# CONFIG_BFIN_SIMPLE_TIMER is not set
+CONFIG_BF5xx_PPI=y
+CONFIG_BFIN_SPORT=y
+# CONFIG_BFIN_TIMER_LATENCY is not set
+# CONFIG_TWI_LCD is not set
+CONFIG_SIMPLE_GPIO=m
+# CONFIG_VT is not set
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_BFIN=y
+CONFIG_SERIAL_BFIN_CONSOLE=y
+CONFIG_SERIAL_BFIN_DMA=y
+# CONFIG_SERIAL_BFIN_PIO is not set
+CONFIG_SERIAL_BFIN_UART0=y
+# CONFIG_BFIN_UART0_CTSRTS is not set
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_BFIN_SPORT is not set
+CONFIG_UNIX98_PTYS=y
+# CONFIG_LEGACY_PTYS is not set
+
+#
+# CAN, the car bus and industrial fieldbus
+#
+# CONFIG_CAN4LINUX is not set
+# CONFIG_IPMI_HANDLER is not set
+CONFIG_HW_RANDOM=y
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_I2C=m
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_CHARDEV=m
+CONFIG_I2C_ALGOBIT=m
+
+#
+# I2C Hardware Bus support
+#
+CONFIG_I2C_GPIO=m
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_STUB is not set
+# CONFIG_I2C_PCA_PLATFORM is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_DS1682 is not set
+# CONFIG_SENSORS_AD5252 is not set
+# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+CONFIG_SPI=y
+CONFIG_SPI_MASTER=y
+
+#
+# SPI Master Controller Drivers
+#
+CONFIG_SPI_BFIN=y
+# CONFIG_SPI_BITBANG is not set
+
+#
+# SPI Protocol Masters
+#
+CONFIG_SPI_AT25=y
+CONFIG_SPI_SPIDEV=m
+# CONFIG_SPI_TLE62X0 is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_AD7418 is not set
+# CONFIG_SENSORS_ADM1021 is not set
+# CONFIG_SENSORS_ADM1025 is not set
+# CONFIG_SENSORS_ADM1026 is not set
+# CONFIG_SENSORS_ADM1029 is not set
+# CONFIG_SENSORS_ADM1031 is not set
+# CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ADT7470 is not set
+# CONFIG_SENSORS_ADT7473 is not set
+# CONFIG_SENSORS_ATXP1 is not set
+# CONFIG_SENSORS_DS1621 is not set
+# CONFIG_SENSORS_F71805F is not set
+# CONFIG_SENSORS_F71882FG is not set
+# CONFIG_SENSORS_F75375S is not set
+# CONFIG_SENSORS_GL518SM is not set
+# CONFIG_SENSORS_GL520SM is not set
+# CONFIG_SENSORS_IT87 is not set
+# CONFIG_SENSORS_LM63 is not set
+# CONFIG_SENSORS_LM70 is not set
+# CONFIG_SENSORS_LM75 is not set
+# CONFIG_SENSORS_LM77 is not set
+# CONFIG_SENSORS_LM78 is not set
+# CONFIG_SENSORS_LM80 is not set
+# CONFIG_SENSORS_LM83 is not set
+# CONFIG_SENSORS_LM85 is not set
+# CONFIG_SENSORS_LM87 is not set
+# CONFIG_SENSORS_LM90 is not set
+# CONFIG_SENSORS_LM92 is not set
+# CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_MAX1619 is not set
+# CONFIG_SENSORS_MAX6650 is not set
+# CONFIG_SENSORS_PC87360 is not set
+# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_DME1737 is not set
+# CONFIG_SENSORS_SMSC47M1 is not set
+# CONFIG_SENSORS_SMSC47M192 is not set
+# CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_ADS7828 is not set
+# CONFIG_SENSORS_THMC50 is not set
+# CONFIG_SENSORS_VT1211 is not set
+# CONFIG_SENSORS_W83781D is not set
+# CONFIG_SENSORS_W83791D is not set
+# CONFIG_SENSORS_W83792D is not set
+# CONFIG_SENSORS_W83793 is not set
+# CONFIG_SENSORS_W83L785TS is not set
+# CONFIG_SENSORS_W83L786NG is not set
+# CONFIG_SENSORS_W83627HF is not set
+# CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+CONFIG_WATCHDOG=y
+# CONFIG_WATCHDOG_NOWAYOUT is not set
+
+#
+# Watchdog Device Drivers
+#
+# CONFIG_SOFT_WATCHDOG is not set
+CONFIG_BFIN_WDT=y
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
+
+#
+# Multimedia devices
+#
+
+#
+# Multimedia core support
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
+# CONFIG_DAB is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+# CONFIG_HID_DEBUG is not set
+# CONFIG_HIDRAW is not set
+# CONFIG_USB_SUPPORT is not set
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+# CONFIG_MMC_UNSAFE_RESUME is not set
+
+#
+# MMC/SD Card Drivers
+#
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_BLOCK_BOUNCE=y
+# CONFIG_SDIO_UART is not set
+# CONFIG_MMC_TEST is not set
+
+#
+# MMC/SD Host Controller Drivers
+#
+CONFIG_MMC_SPI=y
+# CONFIG_SPI_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
+
+#
+# SPI RTC drivers
+#
+# CONFIG_RTC_DRV_MAX6902 is not set
+# CONFIG_RTC_DRV_R9701 is not set
+# CONFIG_RTC_DRV_RS5C348 is not set
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+CONFIG_RTC_DRV_BFIN=y
+# CONFIG_UIO is not set
+
+#
+# File systems
+#
+# CONFIG_EXT2_FS is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4DEV_FS is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_DNOTIFY is not set
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+# CONFIG_TMPFS is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_YAFFS_FS=m
+CONFIG_YAFFS_YAFFS1=y
+# CONFIG_YAFFS_9BYTE_TAGS is not set
+# CONFIG_YAFFS_DOES_ECC is not set
+CONFIG_YAFFS_YAFFS2=y
+CONFIG_YAFFS_AUTO_YAFFS2=y
+# CONFIG_YAFFS_DISABLE_LAZY_LOAD is not set
+# CONFIG_YAFFS_DISABLE_WIDE_TNODES is not set
+# CONFIG_YAFFS_ALWAYS_CHECK_CHUNK_ERASED is not set
+CONFIG_YAFFS_SHORT_NAMES_IN_RAM=y
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_XATTR is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+CONFIG_NFS_V4=y
+# CONFIG_NFSD is not set
+# CONFIG_ROOT_NFS is not set
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+CONFIG_SUNRPC_GSS=y
+# CONFIG_SUNRPC_BIND34 is not set
+CONFIG_RPCSEC_GSS_KRB5=y
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+CONFIG_SMB_FS=y
+# CONFIG_SMB_NLS_DEFAULT is not set
+CONFIG_CIFS=y
+# CONFIG_CIFS_STATS is not set
+# CONFIG_CIFS_WEAK_PW_HASH is not set
+# CONFIG_CIFS_XATTR is not set
+# CONFIG_CIFS_DEBUG2 is not set
+# CONFIG_CIFS_EXPERIMENTAL is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+CONFIG_NLS_ASCII=y
+# CONFIG_NLS_ISO8859_1 is not set
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+CONFIG_NLS_UTF8=y
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+CONFIG_DEBUG_FS=y
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_KERNEL is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_SAMPLES is not set
+CONFIG_DEBUG_MMRS=y
+CONFIG_DEBUG_HUNT_FOR_ZERO=y
+CONFIG_DEBUG_BFIN_HWTRACE_ON=y
+CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_OFF=y
+# CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_ONE is not set
+# CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_TWO is not set
+CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION=0
+# CONFIG_DEBUG_BFIN_HWTRACE_EXPAND is not set
+# CONFIG_DEBUG_BFIN_NO_KERN_HWTRACE is not set
+CONFIG_EARLY_PRINTK=y
+CONFIG_CPLB_INFO=y
+CONFIG_ACCESS_CHECK=y
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+CONFIG_SECURITY=y
+# CONFIG_SECURITY_NETWORK is not set
+# CONFIG_SECURITY_CAPABILITIES is not set
+CONFIG_SECURITY_DEFAULT_MMAP_MIN_ADDR=0
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_MANAGER=y
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_MD4 is not set
+CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_LZO is not set
+CONFIG_CRYPTO_HW=y
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
+CONFIG_CRC_CCITT=m
+# CONFIG_CRC16 is not set
+CONFIG_CRC_ITU_T=y
+CONFIG_CRC32=y
+CONFIG_CRC7=y
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
diff --git a/arch/blackfin/configs/CM-BF527_defconfig b/arch/blackfin/configs/CM-BF527_defconfig
new file mode 100644
index 000000000000..0799aa9bba9d
--- /dev/null
+++ b/arch/blackfin/configs/CM-BF527_defconfig
@@ -0,0 +1,1185 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.24.7
+# Fri Jul 18 18:00:41 2008
+#
+# CONFIG_MMU is not set
+# CONFIG_FPU is not set
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
+CONFIG_BLACKFIN=y
+CONFIG_ZONE_DMA=y
+CONFIG_SEMAPHORE_SLEEPERS=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_FORCE_MAX_ZONEORDER=14
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
+# CONFIG_AUDIT is not set
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+CONFIG_FAIR_GROUP_SCHED=y
+CONFIG_FAIR_USER_SCHED=y
+# CONFIG_FAIR_CGROUP_SCHED is not set
+CONFIG_SYSFS_DEPRECATED=y
+# CONFIG_RELAY is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
+CONFIG_EMBEDDED=y
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_EVENTFD=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_TINY_SHMEM=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+# CONFIG_IOSCHED_AS is not set
+# CONFIG_IOSCHED_DEADLINE is not set
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_PREEMPT_NONE is not set
+CONFIG_PREEMPT_VOLUNTARY=y
+# CONFIG_PREEMPT is not set
+
+#
+# Blackfin Processor Options
+#
+
+#
+# Processor and Board Settings
+#
+# CONFIG_BF522 is not set
+# CONFIG_BF523 is not set
+# CONFIG_BF524 is not set
+# CONFIG_BF525 is not set
+# CONFIG_BF526 is not set
+CONFIG_BF527=y
+# CONFIG_BF531 is not set
+# CONFIG_BF532 is not set
+# CONFIG_BF533 is not set
+# CONFIG_BF534 is not set
+# CONFIG_BF536 is not set
+# CONFIG_BF537 is not set
+# CONFIG_BF542 is not set
+# CONFIG_BF544 is not set
+# CONFIG_BF547 is not set
+# CONFIG_BF548 is not set
+# CONFIG_BF549 is not set
+# CONFIG_BF561 is not set
+# CONFIG_BF_REV_0_0 is not set
+CONFIG_BF_REV_0_1=y
+# CONFIG_BF_REV_0_2 is not set
+# CONFIG_BF_REV_0_3 is not set
+# CONFIG_BF_REV_0_4 is not set
+# CONFIG_BF_REV_0_5 is not set
+# CONFIG_BF_REV_ANY is not set
+# CONFIG_BF_REV_NONE is not set
+CONFIG_BF52x=y
+CONFIG_MEM_MT48LC16M16A2TG_75=y
+# CONFIG_BFIN527_EZKIT is not set
+CONFIG_BFIN527_BLUETECHNIX_CM=y
+
+#
+# BF527 Specific Configuration
+#
+
+#
+# Alternative Multiplexing Scheme
+#
+# CONFIG_BF527_SPORT0_PORTF is not set
+CONFIG_BF527_SPORT0_PORTG=y
+CONFIG_BF527_SPORT0_TSCLK_PG10=y
+# CONFIG_BF527_SPORT0_TSCLK_PG14 is not set
+CONFIG_BF527_UART1_PORTF=y
+# CONFIG_BF527_UART1_PORTG is not set
+# CONFIG_BF527_NAND_D_PORTF is not set
+CONFIG_BF527_NAND_D_PORTH=y
+
+#
+# Interrupt Priority Assignment
+#
+
+#
+# Priority
+#
+CONFIG_IRQ_PLL_WAKEUP=7
+CONFIG_IRQ_DMA0_ERROR=7
+CONFIG_IRQ_DMAR0_BLK=7
+CONFIG_IRQ_DMAR1_BLK=7
+CONFIG_IRQ_DMAR0_OVR=7
+CONFIG_IRQ_DMAR1_OVR=7
+CONFIG_IRQ_PPI_ERROR=7
+CONFIG_IRQ_MAC_ERROR=7
+CONFIG_IRQ_SPORT0_ERROR=7
+CONFIG_IRQ_SPORT1_ERROR=7
+CONFIG_IRQ_UART0_ERROR=7
+CONFIG_IRQ_UART1_ERROR=7
+CONFIG_IRQ_RTC=8
+CONFIG_IRQ_PPI=8
+CONFIG_IRQ_SPORT0_RX=9
+CONFIG_IRQ_SPORT0_TX=9
+CONFIG_IRQ_SPORT1_RX=9
+CONFIG_IRQ_SPORT1_TX=9
+CONFIG_IRQ_TWI=10
+CONFIG_IRQ_SPI=10
+CONFIG_IRQ_UART0_RX=10
+CONFIG_IRQ_UART0_TX=10
+CONFIG_IRQ_UART1_RX=10
+CONFIG_IRQ_UART1_TX=10
+CONFIG_IRQ_OPTSEC=11
+CONFIG_IRQ_CNT=11
+CONFIG_IRQ_MAC_RX=11
+CONFIG_IRQ_PORTH_INTA=11
+CONFIG_IRQ_MAC_TX=11
+CONFIG_IRQ_PORTH_INTB=11
+CONFIG_IRQ_TMR0=12
+CONFIG_IRQ_TMR1=12
+CONFIG_IRQ_TMR2=12
+CONFIG_IRQ_TMR3=12
+CONFIG_IRQ_TMR4=12
+CONFIG_IRQ_TMR5=12
+CONFIG_IRQ_TMR6=12
+CONFIG_IRQ_TMR7=12
+CONFIG_IRQ_PORTG_INTA=12
+CONFIG_IRQ_PORTG_INTB=12
+CONFIG_IRQ_MEM_DMA0=13
+CONFIG_IRQ_MEM_DMA1=13
+CONFIG_IRQ_WATCH=13
+CONFIG_IRQ_PORTF_INTA=13
+CONFIG_IRQ_PORTF_INTB=13
+CONFIG_IRQ_SPI_ERROR=7
+CONFIG_IRQ_NFC_ERROR=7
+CONFIG_IRQ_HDMA_ERROR=7
+CONFIG_IRQ_HDMA=7
+CONFIG_IRQ_USB_EINT=10
+CONFIG_IRQ_USB_INT0=11
+CONFIG_IRQ_USB_INT1=11
+CONFIG_IRQ_USB_INT2=11
+CONFIG_IRQ_USB_DMA=11
+
+#
+# Board customizations
+#
+# CONFIG_CMDLINE_BOOL is not set
+CONFIG_BOOT_LOAD=0x1000
+
+#
+# Clock/PLL Setup
+#
+CONFIG_CLKIN_HZ=25000000
+# CONFIG_BFIN_KERNEL_CLOCK is not set
+CONFIG_MAX_MEM_SIZE=512
+CONFIG_MAX_VCO_HZ=600000000
+CONFIG_MIN_VCO_HZ=50000000
+CONFIG_MAX_SCLK_HZ=133333333
+CONFIG_MIN_SCLK_HZ=27000000
+
+#
+# Kernel Timer/Scheduler
+#
+# CONFIG_HZ_100 is not set
+CONFIG_HZ_250=y
+# CONFIG_HZ_300 is not set
+# CONFIG_HZ_1000 is not set
+CONFIG_HZ=250
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+# CONFIG_CYCLES_CLOCKSOURCE is not set
+# CONFIG_TICK_ONESHOT is not set
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+
+#
+# Misc
+#
+CONFIG_BFIN_SCRATCH_REG_RETN=y
+# CONFIG_BFIN_SCRATCH_REG_RETE is not set
+# CONFIG_BFIN_SCRATCH_REG_CYCLES is not set
+
+#
+# Blackfin Kernel Optimizations
+#
+
+#
+# Memory Optimizations
+#
+CONFIG_I_ENTRY_L1=y
+CONFIG_EXCPT_IRQ_SYSC_L1=y
+CONFIG_DO_IRQ_L1=y
+CONFIG_CORE_TIMER_IRQ_L1=y
+CONFIG_IDLE_L1=y
+# CONFIG_SCHEDULE_L1 is not set
+CONFIG_ARITHMETIC_OPS_L1=y
+CONFIG_ACCESS_OK_L1=y
+# CONFIG_MEMSET_L1 is not set
+# CONFIG_MEMCPY_L1 is not set
+# CONFIG_SYS_BFIN_SPINLOCK_L1 is not set
+# CONFIG_IP_CHECKSUM_L1 is not set
+CONFIG_CACHELINE_ALIGNED_L1=y
+# CONFIG_SYSCALL_TAB_L1 is not set
+# CONFIG_CPLB_SWITCH_TAB_L1 is not set
+CONFIG_RAMKERNEL=y
+# CONFIG_ROMKERNEL is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_VIRT_TO_BUS=y
+CONFIG_BFIN_GPTIMERS=y
+CONFIG_BFIN_DMA_5XX=y
+# CONFIG_DMA_UNCACHED_4M is not set
+# CONFIG_DMA_UNCACHED_2M is not set
+CONFIG_DMA_UNCACHED_1M=y
+# CONFIG_DMA_UNCACHED_NONE is not set
+
+#
+# Cache Support
+#
+CONFIG_BFIN_ICACHE=y
+CONFIG_BFIN_DCACHE=y
+# CONFIG_BFIN_DCACHE_BANKA is not set
+# CONFIG_BFIN_ICACHE_LOCK is not set
+# CONFIG_BFIN_WB is not set
+CONFIG_BFIN_WT=y
+# CONFIG_MPU is not set
+
+#
+# Asynchonous Memory Configuration
+#
+
+#
+# EBIU_AMGCTL Global Control
+#
+CONFIG_C_AMCKEN=y
+CONFIG_C_CDPRIO=y
+# CONFIG_C_AMBEN is not set
+# CONFIG_C_AMBEN_B0 is not set
+# CONFIG_C_AMBEN_B0_B1 is not set
+# CONFIG_C_AMBEN_B0_B1_B2 is not set
+CONFIG_C_AMBEN_ALL=y
+
+#
+# EBIU_AMBCTL Control
+#
+CONFIG_BANK_0=0x7BB0
+CONFIG_BANK_1=0x5554
+CONFIG_BANK_2=0x7BB0
+CONFIG_BANK_3=0xFFC0
+
+#
+# Bus options (PCI, PCMCIA, EISA, MCA, ISA)
+#
+# CONFIG_PCI is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Executable file formats
+#
+CONFIG_BINFMT_ELF_FDPIC=y
+CONFIG_BINFMT_FLAT=y
+CONFIG_BINFMT_ZFLAT=y
+# CONFIG_BINFMT_SHARED_FLAT is not set
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options
+#
+# CONFIG_PM is not set
+CONFIG_SUSPEND_UP_POSSIBLE=y
+# CONFIG_PM_BFIN_SLEEP_DEEPER is not set
+# CONFIG_PM_BFIN_SLEEP is not set
+# CONFIG_PM_WAKEUP_BY_GPIO is not set
+
+#
+# CPU Frequency scaling
+#
+# CONFIG_CPU_FREQ is not set
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+# CONFIG_IP_PNP_DHCP is not set
+# CONFIG_IP_PNP_BOOTP is not set
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+CONFIG_SYN_COOKIES=y
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
+# CONFIG_NETLABEL is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
+# CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_FW_LOADER is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+# CONFIG_MTD_CMDLINE_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=m
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+# CONFIG_MTD_CFI is not set
+CONFIG_MTD_JEDECPROBE=m
+CONFIG_MTD_GEN_PROBE=m
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_CFI_INTELEXT is not set
+# CONFIG_MTD_CFI_AMDSTD is not set
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_RAM=y
+CONFIG_MTD_ROM=m
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+CONFIG_MTD_COMPLEX_MAPPINGS=y
+# CONFIG_MTD_PHYSMAP is not set
+# CONFIG_MTD_UCLINUX is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_DATAFLASH is not set
+# CONFIG_MTD_M25P80 is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+# CONFIG_MTD_NAND is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+# CONFIG_BLK_DEV_LOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=4096
+CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_MISC_DEVICES is not set
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+# CONFIG_MARVELL_PHY is not set
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+# CONFIG_SMSC_PHY is not set
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_FIXED_PHY is not set
+# CONFIG_MDIO_BITBANG is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+CONFIG_BFIN_MAC=y
+CONFIG_BFIN_MAC_USE_L1=y
+CONFIG_BFIN_TX_DESC_NUM=10
+CONFIG_BFIN_RX_DESC_NUM=20
+CONFIG_BFIN_MAC_RMII=y
+# CONFIG_SMC91X is not set
+# CONFIG_SMSC911X is not set
+# CONFIG_DM9000 is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_B44 is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
+# CONFIG_WAN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_SHAPER is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+# CONFIG_INPUT is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+# CONFIG_AD9960 is not set
+# CONFIG_SPI_ADC_BF533 is not set
+# CONFIG_BF5xx_PPIFCD is not set
+# CONFIG_BFIN_SIMPLE_TIMER is not set
+# CONFIG_BF5xx_PPI is not set
+CONFIG_BFIN_OTP=y
+# CONFIG_BFIN_OTP_WRITE_ENABLE is not set
+# CONFIG_BFIN_SPORT is not set
+# CONFIG_BFIN_TIMER_LATENCY is not set
+# CONFIG_TWI_LCD is not set
+CONFIG_SIMPLE_GPIO=m
+# CONFIG_VT is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_BFIN=y
+CONFIG_SERIAL_BFIN_CONSOLE=y
+CONFIG_SERIAL_BFIN_DMA=y
+# CONFIG_SERIAL_BFIN_PIO is not set
+CONFIG_SERIAL_BFIN_UART0=y
+# CONFIG_BFIN_UART0_CTSRTS is not set
+CONFIG_SERIAL_BFIN_UART1=y
+# CONFIG_BFIN_UART1_CTSRTS is not set
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_BFIN_SPORT is not set
+CONFIG_UNIX98_PTYS=y
+# CONFIG_LEGACY_PTYS is not set
+
+#
+# CAN, the car bus and industrial fieldbus
+#
+# CONFIG_CAN4LINUX is not set
+# CONFIG_IPMI_HANDLER is not set
+CONFIG_HW_RANDOM=y
+# CONFIG_GEN_RTC is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_CHARDEV=m
+
+#
+# I2C Algorithms
+#
+# CONFIG_I2C_ALGOBIT is not set
+# CONFIG_I2C_ALGOPCF is not set
+# CONFIG_I2C_ALGOPCA is not set
+
+#
+# I2C Hardware Bus support
+#
+CONFIG_I2C_BLACKFIN_TWI=m
+CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ=50
+# CONFIG_I2C_GPIO is not set
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_STUB is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_SENSORS_DS1337 is not set
+# CONFIG_SENSORS_DS1374 is not set
+# CONFIG_DS1682 is not set
+# CONFIG_SENSORS_AD5252 is not set
+# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_SENSORS_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+
+#
+# SPI support
+#
+CONFIG_SPI=y
+CONFIG_SPI_MASTER=y
+
+#
+# SPI Master Controller Drivers
+#
+CONFIG_SPI_BFIN=y
+# CONFIG_SPI_BITBANG is not set
+
+#
+# SPI Protocol Masters
+#
+# CONFIG_SPI_AT25 is not set
+# CONFIG_SPI_SPIDEV is not set
+# CONFIG_SPI_TLE62X0 is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+CONFIG_HWMON=y
+# CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_AD7418 is not set
+# CONFIG_SENSORS_ADM1021 is not set
+# CONFIG_SENSORS_ADM1025 is not set
+# CONFIG_SENSORS_ADM1026 is not set
+# CONFIG_SENSORS_ADM1029 is not set
+# CONFIG_SENSORS_ADM1031 is not set
+# CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ADT7470 is not set
+# CONFIG_SENSORS_ATXP1 is not set
+# CONFIG_SENSORS_DS1621 is not set
+# CONFIG_SENSORS_F71805F is not set
+# CONFIG_SENSORS_F71882FG is not set
+# CONFIG_SENSORS_F75375S is not set
+# CONFIG_SENSORS_GL518SM is not set
+# CONFIG_SENSORS_GL520SM is not set
+# CONFIG_SENSORS_IT87 is not set
+# CONFIG_SENSORS_LM63 is not set
+# CONFIG_SENSORS_LM70 is not set
+# CONFIG_SENSORS_LM75 is not set
+# CONFIG_SENSORS_LM77 is not set
+# CONFIG_SENSORS_LM78 is not set
+# CONFIG_SENSORS_LM80 is not set
+# CONFIG_SENSORS_LM83 is not set
+# CONFIG_SENSORS_LM85 is not set
+# CONFIG_SENSORS_LM87 is not set
+# CONFIG_SENSORS_LM90 is not set
+# CONFIG_SENSORS_LM92 is not set
+# CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_MAX1619 is not set
+# CONFIG_SENSORS_MAX6650 is not set
+# CONFIG_SENSORS_PC87360 is not set
+# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_DME1737 is not set
+# CONFIG_SENSORS_SMSC47M1 is not set
+# CONFIG_SENSORS_SMSC47M192 is not set
+# CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_THMC50 is not set
+# CONFIG_SENSORS_VT1211 is not set
+# CONFIG_SENSORS_W83781D is not set
+# CONFIG_SENSORS_W83791D is not set
+# CONFIG_SENSORS_W83792D is not set
+# CONFIG_SENSORS_W83793 is not set
+# CONFIG_SENSORS_W83L785TS is not set
+# CONFIG_SENSORS_W83627HF is not set
+# CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+CONFIG_WATCHDOG=y
+# CONFIG_WATCHDOG_NOWAYOUT is not set
+
+#
+# Watchdog Device Drivers
+#
+# CONFIG_SOFT_WATCHDOG is not set
+CONFIG_BFIN_WDT=y
+
+#
+# USB-based Watchdog Cards
+#
+# CONFIG_USBPCWATCHDOG is not set
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_SM501 is not set
+
+#
+# Multimedia devices
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_DAB is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+# CONFIG_USB_ARCH_HAS_OHCI is not set
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+
+#
+# Miscellaneous USB options
+#
+# CONFIG_USB_DEVICEFS is not set
+CONFIG_USB_DEVICE_CLASS=y
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_OTG is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+CONFIG_USB_OTG_BLACKLIST_HUB=y
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1362_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+CONFIG_USB_MUSB_HDRC=y
+CONFIG_USB_MUSB_SOC=y
+
+#
+# Blackfin high speed USB support
+#
+CONFIG_USB_MUSB_HOST=y
+# CONFIG_USB_MUSB_PERIPHERAL is not set
+# CONFIG_USB_MUSB_OTG is not set
+CONFIG_USB_MUSB_HDRC_HCD=y
+CONFIG_MUSB_PIO_ONLY=y
+CONFIG_USB_MUSB_LOGLEVEL=0
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# may also be needed; see USB_STORAGE Help for more information
+#
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+CONFIG_USB_MON=y
+
+#
+# USB port drivers
+#
+
+#
+# USB Serial Converter support
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_AUERSWALD is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_PHIDGET is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_SISUSBVGA is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+
+#
+# USB DSL modem support
+#
+
+#
+# USB Gadget Support
+#
+# CONFIG_USB_GADGET is not set
+# CONFIG_MMC is not set
+# CONFIG_NEW_LEDS is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+
+#
+# SPI RTC drivers
+#
+# CONFIG_RTC_DRV_RS5C348 is not set
+# CONFIG_RTC_DRV_MAX6902 is not set
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+CONFIG_RTC_DRV_BFIN=y
+
+#
+# Userspace I/O
+#
+# CONFIG_UIO is not set
+
+#
+# File systems
+#
+# CONFIG_EXT2_FS is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4DEV_FS is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+# CONFIG_DNOTIFY is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+# CONFIG_TMPFS is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_YAFFS_FS is not set
+# CONFIG_JFFS2_FS is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=m
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+# CONFIG_NFS_V4 is not set
+# CONFIG_NFS_DIRECTIO is not set
+# CONFIG_NFSD is not set
+CONFIG_LOCKD=m
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=m
+# CONFIG_SUNRPC_BIND34 is not set
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+CONFIG_SMB_FS=m
+# CONFIG_SMB_NLS_DEFAULT is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+CONFIG_NLS=m
+CONFIG_NLS_DEFAULT="iso8859-1"
+# CONFIG_NLS_CODEPAGE_437 is not set
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+# CONFIG_NLS_ISO8859_1 is not set
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+# CONFIG_DLM is not set
+# CONFIG_INSTRUMENTATION is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+CONFIG_DEBUG_FS=y
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_KERNEL is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_SAMPLES is not set
+CONFIG_DEBUG_MMRS=y
+CONFIG_DEBUG_HUNT_FOR_ZERO=y
+CONFIG_DEBUG_BFIN_HWTRACE_ON=y
+CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_OFF=y
+# CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_ONE is not set
+# CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_TWO is not set
+CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION=0
+# CONFIG_DEBUG_BFIN_HWTRACE_EXPAND is not set
+# CONFIG_DEBUG_BFIN_NO_KERN_HWTRACE is not set
+CONFIG_EARLY_PRINTK=y
+# CONFIG_CPLB_INFO is not set
+CONFIG_ACCESS_CHECK=y
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+CONFIG_SECURITY=y
+# CONFIG_SECURITY_NETWORK is not set
+# CONFIG_SECURITY_CAPABILITIES is not set
+# CONFIG_SECURITY_ROOTPLUG is not set
+# CONFIG_CRYPTO is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_CRC_CCITT=m
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
diff --git a/arch/blackfin/configs/CM-BF533_defconfig b/arch/blackfin/configs/CM-BF533_defconfig
index 560890fe0d30..09deea44480b 100644
--- a/arch/blackfin/configs/CM-BF533_defconfig
+++ b/arch/blackfin/configs/CM-BF533_defconfig
@@ -39,7 +39,8 @@ CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_TASKSTATS is not set
 # CONFIG_UTS_NS is not set
 # CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_SYSFS_DEPRECATED=y
 # CONFIG_RELAY is not set
@@ -291,7 +292,7 @@ CONFIG_C_AMBEN_ALL=y
 CONFIG_BANK_0=0x7BB0
 CONFIG_BANK_1=0x7BB0
 CONFIG_BANK_2=0x7BB0
-CONFIG_BANK_3=0xFFC3
+CONFIG_BANK_3=0xFFC2
 
 #
 # Bus options (PCI, PCMCIA, EISA, MCA, ISA)
@@ -617,8 +618,7 @@ CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
 # CONFIG_SERIAL_BFIN_SPORT is not set
 CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_LEGACY_PTYS is not set
 
 #
 # CAN, the car bus and industrial fieldbus
@@ -778,7 +778,7 @@ CONFIG_FS_MBCACHE=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
+# CONFIG_DNOTIFY is not set
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
 # CONFIG_FUSE_FS is not set
@@ -866,11 +866,11 @@ CONFIG_MSDOS_PARTITION=y
 CONFIG_ENABLE_MUST_CHECK=y
 # CONFIG_MAGIC_SYSRQ is not set
 # CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
+CONFIG_DEBUG_FS=y
 # CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
-# CONFIG_DEBUG_MMRS is not set
+CONFIG_DEBUG_MMRS=y
 CONFIG_DEBUG_HUNT_FOR_ZERO=y
 CONFIG_DEBUG_BFIN_HWTRACE_ON=y
 CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_OFF=y
diff --git a/arch/blackfin/configs/CM-BF537E_defconfig b/arch/blackfin/configs/CM-BF537E_defconfig
index 9f66d2de1007..219fc345a5f5 100644
--- a/arch/blackfin/configs/CM-BF537E_defconfig
+++ b/arch/blackfin/configs/CM-BF537E_defconfig
@@ -39,7 +39,8 @@ CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_TASKSTATS is not set
 # CONFIG_UTS_NS is not set
 # CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_SYSFS_DEPRECATED=y
 # CONFIG_RELAY is not set
@@ -299,7 +300,7 @@ CONFIG_C_AMBEN_ALL=y
 CONFIG_BANK_0=0x7BB0
 CONFIG_BANK_1=0x7BB0
 CONFIG_BANK_2=0x7BB0
-CONFIG_BANK_3=0xFFC3
+CONFIG_BANK_3=0xFFC2
 
 #
 # Bus options (PCI, PCMCIA, EISA, MCA, ISA)
@@ -351,7 +352,10 @@ CONFIG_INET=y
 # CONFIG_IP_MULTICAST is not set
 # CONFIG_IP_ADVANCED_ROUTER is not set
 CONFIG_IP_FIB_HASH=y
-# CONFIG_IP_PNP is not set
+CONFIG_IP_PNP=y
+# CONFIG_IP_PNP_DHCP is not set
+# CONFIG_IP_PNP_BOOTP is not set
+# CONFIG_IP_PNP_RARP is not set
 # CONFIG_NET_IPIP is not set
 # CONFIG_NET_IPGRE is not set
 # CONFIG_ARPD is not set
@@ -645,8 +649,7 @@ CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
 # CONFIG_SERIAL_BFIN_SPORT is not set
 CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_LEGACY_PTYS is not set
 
 #
 # CAN, the car bus and industrial fieldbus
@@ -806,7 +809,7 @@ CONFIG_FS_MBCACHE=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
+# CONFIG_DNOTIFY is not set
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
 # CONFIG_FUSE_FS is not set
@@ -894,12 +897,12 @@ CONFIG_MSDOS_PARTITION=y
 CONFIG_ENABLE_MUST_CHECK=y
 # CONFIG_MAGIC_SYSRQ is not set
 # CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
+CONFIG_DEBUG_FS=y
 # CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
-# CONFIG_DEBUG_MMRS is not set
-# CONFIG_DEBUG_HUNT_FOR_ZERO is not set
+CONFIG_DEBUG_MMRS=y
+CONFIG_DEBUG_HUNT_FOR_ZERO=y
 CONFIG_DEBUG_BFIN_HWTRACE_ON=y
 CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_OFF=y
 # CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_ONE is not set
diff --git a/arch/blackfin/configs/CM-BF537U_defconfig b/arch/blackfin/configs/CM-BF537U_defconfig
index 2694d06c5bde..9873d586fc77 100644
--- a/arch/blackfin/configs/CM-BF537U_defconfig
+++ b/arch/blackfin/configs/CM-BF537U_defconfig
@@ -39,7 +39,8 @@ CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_TASKSTATS is not set
 # CONFIG_UTS_NS is not set
 # CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_SYSFS_DEPRECATED=y
 # CONFIG_RELAY is not set
@@ -298,8 +299,8 @@ CONFIG_C_AMBEN_ALL=y
 #
 CONFIG_BANK_0=0x7BB0
 CONFIG_BANK_1=0x7BB0
-CONFIG_BANK_2=0xFFC3
-CONFIG_BANK_3=0xFFC3
+CONFIG_BANK_2=0xFFC2
+CONFIG_BANK_3=0xFFC2
 
 #
 # Bus options (PCI, PCMCIA, EISA, MCA, ISA)
@@ -628,8 +629,7 @@ CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
 # CONFIG_SERIAL_BFIN_SPORT is not set
 CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_LEGACY_PTYS is not set
 
 #
 # CAN, the car bus and industrial fieldbus
@@ -806,7 +806,7 @@ CONFIG_FS_MBCACHE=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
+# CONFIG_DNOTIFY is not set
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
 # CONFIG_FUSE_FS is not set
@@ -894,12 +894,12 @@ CONFIG_MSDOS_PARTITION=y
 CONFIG_ENABLE_MUST_CHECK=y
 # CONFIG_MAGIC_SYSRQ is not set
 # CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
+CONFIG_DEBUG_FS=y
 # CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
-# CONFIG_DEBUG_MMRS is not set
-# CONFIG_DEBUG_HUNT_FOR_ZERO is not set
+CONFIG_DEBUG_MMRS=y
+CONFIG_DEBUG_HUNT_FOR_ZERO=y
 CONFIG_DEBUG_BFIN_HWTRACE_ON=y
 CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_OFF=y
 # CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_ONE is not set
diff --git a/arch/blackfin/configs/CM-BF548_defconfig b/arch/blackfin/configs/CM-BF548_defconfig
index 90207251c533..0e3605fdb7b0 100644
--- a/arch/blackfin/configs/CM-BF548_defconfig
+++ b/arch/blackfin/configs/CM-BF548_defconfig
@@ -363,7 +363,7 @@ CONFIG_C_AMBEN_ALL=y
 CONFIG_BANK_0=0x7BB0
 CONFIG_BANK_1=0x5554
 CONFIG_BANK_2=0x7BB0
-CONFIG_BANK_3=0x99B3
+CONFIG_BANK_3=0x99B2
 CONFIG_EBIU_MBSCTLVAL=0x0
 CONFIG_EBIU_MODEVAL=0x1
 CONFIG_EBIU_FCTLVAL=0x6
@@ -744,8 +744,8 @@ CONFIG_BFIN_OTP=y
 #
 CONFIG_SERIAL_BFIN=y
 CONFIG_SERIAL_BFIN_CONSOLE=y
-# CONFIG_SERIAL_BFIN_DMA is not set
-CONFIG_SERIAL_BFIN_PIO=y
+CONFIG_SERIAL_BFIN_DMA=y
+# CONFIG_SERIAL_BFIN_PIO is not set
 # CONFIG_SERIAL_BFIN_UART0 is not set
 CONFIG_SERIAL_BFIN_UART1=y
 # CONFIG_BFIN_UART1_CTSRTS is not set
@@ -1149,7 +1149,7 @@ CONFIG_RTC_DRV_BFIN=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
+# CONFIG_DNOTIFY is not set
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
 # CONFIG_FUSE_FS is not set
@@ -1332,7 +1332,7 @@ CONFIG_DEBUG_FS=y
 # CONFIG_DEBUG_KERNEL is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
 # CONFIG_SAMPLES is not set
-# CONFIG_DEBUG_MMRS is not set
+CONFIG_DEBUG_MMRS=y
 CONFIG_DEBUG_HUNT_FOR_ZERO=y
 CONFIG_DEBUG_BFIN_HWTRACE_ON=y
 CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_OFF=y
diff --git a/arch/blackfin/configs/CM-BF561_defconfig b/arch/blackfin/configs/CM-BF561_defconfig
index daf00906c1ef..59c7cdbee904 100644
--- a/arch/blackfin/configs/CM-BF561_defconfig
+++ b/arch/blackfin/configs/CM-BF561_defconfig
@@ -35,7 +35,8 @@ CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_USER_NS is not set
 # CONFIG_PID_NS is not set
 # CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_CGROUPS is not set
 CONFIG_FAIR_GROUP_SCHED=y
@@ -341,7 +342,7 @@ CONFIG_C_AMBEN_ALL=y
 CONFIG_BANK_0=0x7BB0
 CONFIG_BANK_1=0x7BB0
 CONFIG_BANK_2=0x7BB0
-CONFIG_BANK_3=0xFFC3
+CONFIG_BANK_3=0xFFC2
 
 #
 # Bus options (PCI, PCMCIA, EISA, MCA, ISA)
@@ -631,8 +632,7 @@ CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
 # CONFIG_SERIAL_BFIN_SPORT is not set
 CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_LEGACY_PTYS is not set
 
 #
 # CAN, the car bus and industrial fieldbus
@@ -756,7 +756,7 @@ CONFIG_FS_MBCACHE=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
+# CONFIG_DNOTIFY is not set
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
 # CONFIG_FUSE_FS is not set
@@ -830,12 +830,12 @@ CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
 # CONFIG_MAGIC_SYSRQ is not set
 # CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
+CONFIG_DEBUG_FS=y
 # CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
 # CONFIG_SAMPLES is not set
-# CONFIG_DEBUG_MMRS is not set
+CONFIG_DEBUG_MMRS=y
 CONFIG_DEBUG_HUNT_FOR_ZERO=y
 CONFIG_DEBUG_BFIN_HWTRACE_ON=y
 CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_OFF=y
diff --git a/arch/blackfin/configs/H8606_defconfig b/arch/blackfin/configs/H8606_defconfig
index 679c7483ea71..ba0bee90b7e1 100644
--- a/arch/blackfin/configs/H8606_defconfig
+++ b/arch/blackfin/configs/H8606_defconfig
@@ -967,7 +967,7 @@ CONFIG_FS_MBCACHE=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
+# CONFIG_DNOTIFY is not set
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
 # CONFIG_FUSE_FS is not set
diff --git a/arch/blackfin/configs/IP0X_defconfig b/arch/blackfin/configs/IP0X_defconfig
index 4384a670a8b8..285d2241df26 100644
--- a/arch/blackfin/configs/IP0X_defconfig
+++ b/arch/blackfin/configs/IP0X_defconfig
@@ -1066,7 +1066,7 @@ CONFIG_FS_MBCACHE=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
+# CONFIG_DNOTIFY is not set
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
 # CONFIG_FUSE_FS is not set
diff --git a/arch/blackfin/configs/PNAV-10_defconfig b/arch/blackfin/configs/PNAV-10_defconfig
index 87622ad9df47..bffca7de65d4 100644
--- a/arch/blackfin/configs/PNAV-10_defconfig
+++ b/arch/blackfin/configs/PNAV-10_defconfig
@@ -294,7 +294,7 @@ CONFIG_C_AMBEN_ALL=y
 CONFIG_BANK_0=0x7BB0
 CONFIG_BANK_1=0x33B0
 CONFIG_BANK_2=0x33B0
-CONFIG_BANK_3=0x99B3
+CONFIG_BANK_3=0x99B2
 
 #
 # Bus options (PCI, PCMCIA, EISA, MCA, ISA)
@@ -1080,7 +1080,7 @@ CONFIG_FS_MBCACHE=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
+# CONFIG_DNOTIFY is not set
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
 # CONFIG_FUSE_FS is not set
diff --git a/arch/blackfin/configs/SRV1_defconfig b/arch/blackfin/configs/SRV1_defconfig
index 951ea0412576..b1309f878fcd 100644
--- a/arch/blackfin/configs/SRV1_defconfig
+++ b/arch/blackfin/configs/SRV1_defconfig
@@ -1067,7 +1067,7 @@ CONFIG_FS_MBCACHE=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
+# CONFIG_DNOTIFY is not set
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
 # CONFIG_FUSE_FS is not set
diff --git a/arch/blackfin/configs/TCM-BF537_defconfig b/arch/blackfin/configs/TCM-BF537_defconfig
new file mode 100644
index 000000000000..c482ee171f9e
--- /dev/null
+++ b/arch/blackfin/configs/TCM-BF537_defconfig
@@ -0,0 +1,693 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.24.7
+# Thu Jul 31 00:53:15 2008
+#
+# CONFIG_MMU is not set
+# CONFIG_FPU is not set
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
+CONFIG_BLACKFIN=y
+CONFIG_ZONE_DMA=y
+CONFIG_SEMAPHORE_SLEEPERS=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_FORCE_MAX_ZONEORDER=14
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+CONFIG_FAIR_GROUP_SCHED=y
+CONFIG_FAIR_USER_SCHED=y
+# CONFIG_FAIR_CGROUP_SCHED is not set
+CONFIG_SYSFS_DEPRECATED=y
+# CONFIG_RELAY is not set
+# CONFIG_BLK_DEV_INITRD is not set
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
+CONFIG_EMBEDDED=y
+# CONFIG_UID16 is not set
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_HOTPLUG is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_EVENTFD=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_TINY_SHMEM=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+# CONFIG_IOSCHED_AS is not set
+# CONFIG_IOSCHED_DEADLINE is not set
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_NOOP=y
+CONFIG_DEFAULT_IOSCHED="noop"
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+
+#
+# Blackfin Processor Options
+#
+
+#
+# Processor and Board Settings
+#
+# CONFIG_BF522 is not set
+# CONFIG_BF523 is not set
+# CONFIG_BF524 is not set
+# CONFIG_BF525 is not set
+# CONFIG_BF526 is not set
+# CONFIG_BF527 is not set
+# CONFIG_BF531 is not set
+# CONFIG_BF532 is not set
+# CONFIG_BF533 is not set
+# CONFIG_BF534 is not set
+# CONFIG_BF536 is not set
+CONFIG_BF537=y
+# CONFIG_BF542 is not set
+# CONFIG_BF544 is not set
+# CONFIG_BF547 is not set
+# CONFIG_BF548 is not set
+# CONFIG_BF549 is not set
+# CONFIG_BF561 is not set
+# CONFIG_BF_REV_0_0 is not set
+# CONFIG_BF_REV_0_1 is not set
+CONFIG_BF_REV_0_2=y
+# CONFIG_BF_REV_0_3 is not set
+# CONFIG_BF_REV_0_4 is not set
+# CONFIG_BF_REV_0_5 is not set
+# CONFIG_BF_REV_ANY is not set
+# CONFIG_BF_REV_NONE is not set
+CONFIG_BF53x=y
+CONFIG_IRQ_PLL_WAKEUP=7
+CONFIG_IRQ_RTC=8
+CONFIG_IRQ_PPI=8
+CONFIG_IRQ_SPORT0_RX=9
+CONFIG_IRQ_SPORT0_TX=9
+CONFIG_IRQ_SPORT1_RX=9
+CONFIG_IRQ_SPORT1_TX=9
+CONFIG_IRQ_TWI=10
+CONFIG_IRQ_SPI=10
+CONFIG_IRQ_UART0_RX=10
+CONFIG_IRQ_UART0_TX=10
+CONFIG_IRQ_UART1_RX=10
+CONFIG_IRQ_UART1_TX=10
+CONFIG_IRQ_MAC_RX=11
+CONFIG_IRQ_MAC_TX=11
+CONFIG_IRQ_TMR0=12
+CONFIG_IRQ_TMR1=12
+CONFIG_IRQ_TMR2=12
+CONFIG_IRQ_TMR3=12
+CONFIG_IRQ_TMR4=12
+CONFIG_IRQ_TMR5=12
+CONFIG_IRQ_TMR6=12
+CONFIG_IRQ_TMR7=12
+CONFIG_IRQ_PORTG_INTB=12
+CONFIG_IRQ_MEM_DMA0=13
+CONFIG_IRQ_MEM_DMA1=13
+CONFIG_IRQ_WATCH=13
+# CONFIG_BFIN537_STAMP is not set
+# CONFIG_BFIN537_BLUETECHNIX_CM is not set
+CONFIG_BFIN537_BLUETECHNIX_TCM=y
+# CONFIG_PNAV10 is not set
+# CONFIG_CAMSIG_MINOTAUR is not set
+# CONFIG_GENERIC_BF537_BOARD is not set
+
+#
+# BF537 Specific Configuration
+#
+
+#
+# Interrupt Priority Assignment
+#
+
+#
+# Priority
+#
+CONFIG_IRQ_DMA_ERROR=7
+CONFIG_IRQ_ERROR=7
+CONFIG_IRQ_CAN_RX=11
+CONFIG_IRQ_CAN_TX=11
+CONFIG_IRQ_PROG_INTA=12
+
+#
+# Board customizations
+#
+# CONFIG_CMDLINE_BOOL is not set
+CONFIG_BOOT_LOAD=0x1000
+
+#
+# Clock/PLL Setup
+#
+CONFIG_CLKIN_HZ=25000000
+# CONFIG_BFIN_KERNEL_CLOCK is not set
+CONFIG_MAX_MEM_SIZE=32
+CONFIG_MAX_VCO_HZ=600000000
+CONFIG_MIN_VCO_HZ=50000000
+CONFIG_MAX_SCLK_HZ=133333333
+CONFIG_MIN_SCLK_HZ=27000000
+
+#
+# Kernel Timer/Scheduler
+#
+# CONFIG_HZ_100 is not set
+CONFIG_HZ_250=y
+# CONFIG_HZ_300 is not set
+# CONFIG_HZ_1000 is not set
+CONFIG_HZ=250
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+# CONFIG_CYCLES_CLOCKSOURCE is not set
+# CONFIG_TICK_ONESHOT is not set
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+
+#
+# Misc
+#
+CONFIG_BFIN_SCRATCH_REG_RETN=y
+# CONFIG_BFIN_SCRATCH_REG_RETE is not set
+# CONFIG_BFIN_SCRATCH_REG_CYCLES is not set
+
+#
+# Blackfin Kernel Optimizations
+#
+
+#
+# Memory Optimizations
+#
+CONFIG_I_ENTRY_L1=y
+CONFIG_EXCPT_IRQ_SYSC_L1=y
+CONFIG_DO_IRQ_L1=y
+CONFIG_CORE_TIMER_IRQ_L1=y
+CONFIG_IDLE_L1=y
+CONFIG_SCHEDULE_L1=y
+CONFIG_ARITHMETIC_OPS_L1=y
+CONFIG_ACCESS_OK_L1=y
+CONFIG_MEMSET_L1=y
+CONFIG_MEMCPY_L1=y
+CONFIG_SYS_BFIN_SPINLOCK_L1=y
+CONFIG_IP_CHECKSUM_L1=y
+CONFIG_CACHELINE_ALIGNED_L1=y
+CONFIG_SYSCALL_TAB_L1=y
+CONFIG_CPLB_SWITCH_TAB_L1=y
+CONFIG_RAMKERNEL=y
+# CONFIG_ROMKERNEL is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_VIRT_TO_BUS=y
+# CONFIG_BFIN_GPTIMERS is not set
+CONFIG_BFIN_DMA_5XX=y
+# CONFIG_DMA_UNCACHED_4M is not set
+# CONFIG_DMA_UNCACHED_2M is not set
+CONFIG_DMA_UNCACHED_1M=y
+# CONFIG_DMA_UNCACHED_NONE is not set
+
+#
+# Cache Support
+#
+CONFIG_BFIN_ICACHE=y
+CONFIG_BFIN_DCACHE=y
+# CONFIG_BFIN_DCACHE_BANKA is not set
+# CONFIG_BFIN_ICACHE_LOCK is not set
+CONFIG_BFIN_WB=y
+# CONFIG_BFIN_WT is not set
+# CONFIG_MPU is not set
+
+#
+# Asynchonous Memory Configuration
+#
+
+#
+# EBIU_AMGCTL Global Control
+#
+CONFIG_C_AMCKEN=y
+CONFIG_C_CDPRIO=y
+# CONFIG_C_AMBEN is not set
+# CONFIG_C_AMBEN_B0 is not set
+# CONFIG_C_AMBEN_B0_B1 is not set
+# CONFIG_C_AMBEN_B0_B1_B2 is not set
+CONFIG_C_AMBEN_ALL=y
+
+#
+# EBIU_AMBCTL Control
+#
+CONFIG_BANK_0=0x7BB0
+CONFIG_BANK_1=0x7BB0
+CONFIG_BANK_2=0x7BB0
+CONFIG_BANK_3=0xFFC2
+
+#
+# Bus options (PCI, PCMCIA, EISA, MCA, ISA)
+#
+# CONFIG_PCI is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+
+#
+# Executable file formats
+#
+CONFIG_BINFMT_ELF_FDPIC=y
+CONFIG_BINFMT_FLAT=y
+CONFIG_BINFMT_ZFLAT=y
+CONFIG_BINFMT_SHARED_FLAT=y
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options
+#
+# CONFIG_PM is not set
+CONFIG_SUSPEND_UP_POSSIBLE=y
+# CONFIG_PM_WAKEUP_BY_GPIO is not set
+
+#
+# CPU Frequency scaling
+#
+# CONFIG_CPU_FREQ is not set
+
+#
+# Networking
+#
+# CONFIG_NET is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_SYS_HYPERVISOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+# CONFIG_MTD_CMDLINE_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+# CONFIG_MTD_CFI is not set
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+CONFIG_MTD_RAM=y
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_GPIO_ADDR is not set
+CONFIG_MTD_UCLINUX=y
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_DATAFLASH is not set
+# CONFIG_MTD_M25P80 is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+# CONFIG_MTD_NAND is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+# CONFIG_BLK_DEV_LOOP is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=4096
+CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_CDROM_PKTCDVD is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+# CONFIG_INPUT is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+# CONFIG_AD9960 is not set
+# CONFIG_SPI_ADC_BF533 is not set
+# CONFIG_BF5xx_PPIFCD is not set
+# CONFIG_BFIN_SIMPLE_TIMER is not set
+# CONFIG_BF5xx_PPI is not set
+CONFIG_BFIN_SPORT=y
+# CONFIG_BFIN_TIMER_LATENCY is not set
+# CONFIG_SIMPLE_GPIO is not set
+# CONFIG_VT is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_BFIN=y
+CONFIG_SERIAL_BFIN_CONSOLE=y
+CONFIG_SERIAL_BFIN_DMA=y
+# CONFIG_SERIAL_BFIN_PIO is not set
+CONFIG_SERIAL_BFIN_UART0=y
+# CONFIG_BFIN_UART0_CTSRTS is not set
+CONFIG_SERIAL_BFIN_UART1=y
+# CONFIG_BFIN_UART1_CTSRTS is not set
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_BFIN_SPORT is not set
+CONFIG_UNIX98_PTYS=y
+# CONFIG_LEGACY_PTYS is not set
+
+#
+# CAN, the car bus and industrial fieldbus
+#
+# CONFIG_CAN4LINUX is not set
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_GEN_RTC is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+# CONFIG_I2C is not set
+
+#
+# SPI support
+#
+CONFIG_SPI=y
+CONFIG_SPI_MASTER=y
+
+#
+# SPI Master Controller Drivers
+#
+CONFIG_SPI_BFIN=y
+# CONFIG_SPI_BITBANG is not set
+
+#
+# SPI Protocol Masters
+#
+# CONFIG_SPI_AT25 is not set
+# CONFIG_SPI_SPIDEV is not set
+# CONFIG_SPI_TLE62X0 is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+CONFIG_WATCHDOG=y
+# CONFIG_WATCHDOG_NOWAYOUT is not set
+
+#
+# Watchdog Device Drivers
+#
+# CONFIG_SOFT_WATCHDOG is not set
+CONFIG_BFIN_WDT=y
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_SM501 is not set
+
+#
+# Multimedia devices
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DAB is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+# CONFIG_USB_SUPPORT is not set
+# CONFIG_MMC is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_RTC_CLASS is not set
+
+#
+# Userspace I/O
+#
+# CONFIG_UIO is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+CONFIG_EXT2_FS_XATTR=y
+# CONFIG_EXT2_FS_POSIX_ACL is not set
+# CONFIG_EXT2_FS_SECURITY is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4DEV_FS is not set
+CONFIG_FS_MBCACHE=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+# CONFIG_DNOTIFY is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+# CONFIG_TMPFS is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_YAFFS_FS is not set
+# CONFIG_JFFS2_FS is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_NLS is not set
+# CONFIG_INSTRUMENTATION is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+CONFIG_DEBUG_FS=y
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_KERNEL is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_SAMPLES is not set
+CONFIG_DEBUG_MMRS=y
+CONFIG_DEBUG_HUNT_FOR_ZERO=y
+CONFIG_DEBUG_BFIN_HWTRACE_ON=y
+CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_OFF=y
+# CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_ONE is not set
+# CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_TWO is not set
+CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION=0
+# CONFIG_DEBUG_BFIN_HWTRACE_EXPAND is not set
+# CONFIG_DEBUG_BFIN_NO_KERN_HWTRACE is not set
+# CONFIG_EARLY_PRINTK is not set
+CONFIG_CPLB_INFO=y
+CONFIG_ACCESS_CHECK=y
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+CONFIG_SECURITY=y
+# CONFIG_SECURITY_NETWORK is not set
+CONFIG_SECURITY_CAPABILITIES=y
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_CRYPTO is not set
+
+#
+# Library routines
+#
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_ITU_T is not set
+# CONFIG_CRC32 is not set
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
diff --git a/include/asm-blackfin/.gitignore b/arch/blackfin/include/asm/.gitignore
index 7858564a4466..7858564a4466 100644
--- a/include/asm-blackfin/.gitignore
+++ b/arch/blackfin/include/asm/.gitignore
diff --git a/arch/blackfin/include/asm/Kbuild b/arch/blackfin/include/asm/Kbuild
new file mode 100644
index 000000000000..606ecfdcc962
--- /dev/null
+++ b/arch/blackfin/include/asm/Kbuild
@@ -0,0 +1,3 @@
+include include/asm-generic/Kbuild.asm
+
+unifdef-y += fixed_code.h
diff --git a/include/asm-blackfin/a.out.h b/arch/blackfin/include/asm/a.out.h
index 6c3d652ebd33..6c3d652ebd33 100644
--- a/include/asm-blackfin/a.out.h
+++ b/arch/blackfin/include/asm/a.out.h
diff --git a/include/asm-blackfin/atomic.h b/arch/blackfin/include/asm/atomic.h
index 7cf508718605..7cf508718605 100644
--- a/include/asm-blackfin/atomic.h
+++ b/arch/blackfin/include/asm/atomic.h
diff --git a/include/asm-blackfin/auxvec.h b/arch/blackfin/include/asm/auxvec.h
index 215506cd87b7..215506cd87b7 100644
--- a/include/asm-blackfin/auxvec.h
+++ b/arch/blackfin/include/asm/auxvec.h
diff --git a/include/asm-blackfin/bfin-global.h b/arch/blackfin/include/asm/bfin-global.h
index 76033831eb35..7ba70de66f2b 100644
--- a/include/asm-blackfin/bfin-global.h
+++ b/arch/blackfin/include/asm/bfin-global.h
@@ -56,68 +56,60 @@ extern void dump_bfin_process(struct pt_regs *regs);
 extern void dump_bfin_mem(struct pt_regs *regs);
 extern void dump_bfin_trace_buffer(void);
 
+/* init functions only */
 extern int init_arch_irq(void);
-extern void bfin_reset(void);
-extern void _cplb_hdr(void);
-/* Blackfin cache functions */
 extern void bfin_icache_init(void);
 extern void bfin_dcache_init(void);
-extern int read_iloc(void);
-extern int bfin_console_init(void);
-extern asmlinkage void lower_to_irq14(void);
-extern asmlinkage void bfin_return_from_exception(void);
 extern void init_exception_vectors(void);
-extern void init_dma(void);
 extern void program_IAR(void);
-extern void evt14_softirq(void);
+
+extern void bfin_reset(void);
+extern asmlinkage void lower_to_irq14(void);
+extern asmlinkage void bfin_return_from_exception(void);
+extern asmlinkage void evt14_softirq(void);
 extern asmlinkage void asm_do_IRQ(unsigned int irq, struct pt_regs *regs);
-extern void bfin_gpio_interrupt_setup(int irq, int irq_pfx, int type);
 extern int bfin_internal_set_wake(unsigned int irq, unsigned int state);
 
-extern asmlinkage void finish_atomic_sections (struct pt_regs *regs);
-extern char fixed_code_start;
-extern char fixed_code_end;
-extern int atomic_xchg32(void);
-extern int atomic_cas32(void);
-extern int atomic_add32(void);
-extern int atomic_sub32(void);
-extern int atomic_ior32(void);
-extern int atomic_and32(void);
-extern int atomic_xor32(void);
-extern void safe_user_instruction(void);
-extern void sigreturn_stub(void);
-
 extern void *l1_data_A_sram_alloc(size_t);
 extern void *l1_data_B_sram_alloc(size_t);
 extern void *l1_inst_sram_alloc(size_t);
 extern void *l1_data_sram_alloc(size_t);
 extern void *l1_data_sram_zalloc(size_t);
+extern void *l2_sram_alloc(size_t);
+extern void *l2_sram_zalloc(size_t);
 extern int l1_data_A_sram_free(const void*);
 extern int l1_data_B_sram_free(const void*);
 extern int l1_inst_sram_free(const void*);
 extern int l1_data_sram_free(const void*);
+extern int l2_sram_free(const void *);
 extern int sram_free(const void*);
 
 #define L1_INST_SRAM		0x00000001
 #define L1_DATA_A_SRAM		0x00000002
 #define L1_DATA_B_SRAM		0x00000004
 #define L1_DATA_SRAM		0x00000006
+#define L2_SRAM			0x00000008
 extern void *sram_alloc_with_lsl(size_t, unsigned long);
 extern int sram_free_with_lsl(const void*);
 
 extern const char bfin_board_name[];
-extern unsigned long wall_jiffies;
 
 extern unsigned long bfin_sic_iwr[];
+extern unsigned vr_wakeup;
 extern u16 _bfin_swrst; /* shadow for Software Reset Register (SWRST) */
-extern struct file_operations dpmc_fops;
 extern unsigned long _ramstart, _ramend, _rambase;
 extern unsigned long memory_start, memory_end, physical_mem_end;
 extern char _stext_l1[], _etext_l1[], _sdata_l1[], _edata_l1[], _sbss_l1[],
-    _ebss_l1[], _l1_lma_start[], _sdata_b_l1[], _ebss_b_l1[];
+	_ebss_l1[], _l1_lma_start[], _sdata_b_l1[], _ebss_b_l1[],
+	_stext_l2[], _etext_l2[], _sdata_l2[], _edata_l2[], _sbss_l2[],
+	_ebss_l2[], _l2_lma_start[];
 
-#ifdef CONFIG_MTD_UCLINUX
+/* only used when CONFIG_MTD_UCLINUX */
 extern unsigned long memory_mtd_start, memory_mtd_end, mtd_size;
+
+#ifdef CONFIG_BFIN_ICACHE_LOCK
+extern void cache_grab_lock(int way);
+extern void cache_lock(int way);
 #endif
 
 #endif
diff --git a/include/asm-blackfin/bfin5xx_spi.h b/arch/blackfin/include/asm/bfin5xx_spi.h
index 9fa19158e38d..9fa19158e38d 100644
--- a/include/asm-blackfin/bfin5xx_spi.h
+++ b/arch/blackfin/include/asm/bfin5xx_spi.h
diff --git a/include/asm-blackfin/bfin_simple_timer.h b/arch/blackfin/include/asm/bfin_simple_timer.h
index fccbb595464a..fccbb595464a 100644
--- a/include/asm-blackfin/bfin_simple_timer.h
+++ b/arch/blackfin/include/asm/bfin_simple_timer.h
diff --git a/include/asm-blackfin/bfin_sport.h b/arch/blackfin/include/asm/bfin_sport.h
index c76ed8def302..c76ed8def302 100644
--- a/include/asm-blackfin/bfin_sport.h
+++ b/arch/blackfin/include/asm/bfin_sport.h
diff --git a/include/asm-blackfin/bitops.h b/arch/blackfin/include/asm/bitops.h
index b39a175c79c1..b39a175c79c1 100644
--- a/include/asm-blackfin/bitops.h
+++ b/arch/blackfin/include/asm/bitops.h
diff --git a/include/asm-blackfin/blackfin.h b/arch/blackfin/include/asm/blackfin.h
index 984b74f0a2ec..8749b0e321ab 100644
--- a/include/asm-blackfin/blackfin.h
+++ b/arch/blackfin/include/asm/blackfin.h
@@ -11,7 +11,7 @@
 #define HI(con32) (((con32) >> 16) & 0xFFFF)
 #define hi(con32) (((con32) >> 16) & 0xFFFF)
 
-#include <asm/mach/anomaly.h>
+#include <mach/anomaly.h>
 
 #ifndef __ASSEMBLY__
 
@@ -86,7 +86,7 @@ static inline void CSYNC(void)
 
 #endif /* __ASSEMBLY__ */
 
-#include <asm/mach/blackfin.h>
+#include <mach/blackfin.h>
 #include <asm/bfin-global.h>
 
 #endif				/* _BLACKFIN_H_ */
diff --git a/include/asm-blackfin/bug.h b/arch/blackfin/include/asm/bug.h
index 6d3e11b1fc57..6d3e11b1fc57 100644
--- a/include/asm-blackfin/bug.h
+++ b/arch/blackfin/include/asm/bug.h
diff --git a/include/asm-blackfin/bugs.h b/arch/blackfin/include/asm/bugs.h
index 9093c9c1fb81..9093c9c1fb81 100644
--- a/include/asm-blackfin/bugs.h
+++ b/arch/blackfin/include/asm/bugs.h
diff --git a/include/asm-blackfin/byteorder.h b/arch/blackfin/include/asm/byteorder.h
index 6a673d42da18..6a673d42da18 100644
--- a/include/asm-blackfin/byteorder.h
+++ b/arch/blackfin/include/asm/byteorder.h
diff --git a/include/asm-blackfin/cache.h b/arch/blackfin/include/asm/cache.h
index 023d72133b5a..023d72133b5a 100644
--- a/include/asm-blackfin/cache.h
+++ b/arch/blackfin/include/asm/cache.h
diff --git a/include/asm-blackfin/cacheflush.h b/arch/blackfin/include/asm/cacheflush.h
index d81a77545a04..d81a77545a04 100644
--- a/include/asm-blackfin/cacheflush.h
+++ b/arch/blackfin/include/asm/cacheflush.h
diff --git a/include/asm-blackfin/mach-common/cdef_LPBlackfin.h b/arch/blackfin/include/asm/cdef_LPBlackfin.h
index ede210eca4ec..35f841bce57d 100644
--- a/include/asm-blackfin/mach-common/cdef_LPBlackfin.h
+++ b/arch/blackfin/include/asm/cdef_LPBlackfin.h
@@ -33,17 +33,13 @@
 #warning cdef_LPBlackfin.h should only be included for 532 compatible chips.
 #endif
 */
-#include <asm/mach-common/def_LPBlackfin.h>
+#include <asm/def_LPBlackfin.h>
 
 /*Cache & SRAM Memory*/
 #define bfin_read_SRAM_BASE_ADDRESS()        bfin_read32(SRAM_BASE_ADDRESS)
 #define bfin_write_SRAM_BASE_ADDRESS(val)    bfin_write32(SRAM_BASE_ADDRESS,val)
 #define bfin_read_DMEM_CONTROL()             bfin_read32(DMEM_CONTROL)
-#if ANOMALY_05000125
-extern void bfin_write_DMEM_CONTROL(unsigned int val);
-#else
 #define bfin_write_DMEM_CONTROL(val)         bfin_write32(DMEM_CONTROL,val)
-#endif
 #define bfin_read_DCPLB_STATUS()             bfin_read32(DCPLB_STATUS)
 #define bfin_write_DCPLB_STATUS(val)         bfin_write32(DCPLB_STATUS,val)
 #define bfin_read_DCPLB_FAULT_ADDR()         bfin_read32(DCPLB_FAULT_ADDR)
@@ -129,11 +125,7 @@ extern void bfin_write_DMEM_CONTROL(unsigned int val);
 #define DTEST_DATA3            0xFFE0040C
 */
 #define bfin_read_IMEM_CONTROL()             bfin_read32(IMEM_CONTROL)
-#if ANOMALY_05000125
-extern void bfin_write_IMEM_CONTROL(unsigned int val);
-#else
 #define bfin_write_IMEM_CONTROL(val)         bfin_write32(IMEM_CONTROL,val)
-#endif
 #define bfin_read_ICPLB_STATUS()             bfin_read32(ICPLB_STATUS)
 #define bfin_write_ICPLB_STATUS(val)         bfin_write32(ICPLB_STATUS,val)
 #define bfin_read_ICPLB_FAULT_ADDR()         bfin_read32(ICPLB_FAULT_ADDR)
diff --git a/include/asm-blackfin/checksum.h b/arch/blackfin/include/asm/checksum.h
index 6f6af2b8e9e0..6f6af2b8e9e0 100644
--- a/include/asm-blackfin/checksum.h
+++ b/arch/blackfin/include/asm/checksum.h
diff --git a/include/asm-blackfin/mach-common/clocks.h b/arch/blackfin/include/asm/clocks.h
index 033bba92d61c..033bba92d61c 100644
--- a/include/asm-blackfin/mach-common/clocks.h
+++ b/arch/blackfin/include/asm/clocks.h
diff --git a/include/asm-blackfin/mach-common/context.S b/arch/blackfin/include/asm/context.S
index c0e630edfb9a..c0e630edfb9a 100644
--- a/include/asm-blackfin/mach-common/context.S
+++ b/arch/blackfin/include/asm/context.S
diff --git a/include/asm-blackfin/cplb-mpu.h b/arch/blackfin/include/asm/cplb-mpu.h
index 75c67b99d607..75c67b99d607 100644
--- a/include/asm-blackfin/cplb-mpu.h
+++ b/arch/blackfin/include/asm/cplb-mpu.h
diff --git a/include/asm-blackfin/cplb.h b/arch/blackfin/include/asm/cplb.h
index 5b0da9a69b67..05d6f05fb748 100644
--- a/include/asm-blackfin/cplb.h
+++ b/arch/blackfin/include/asm/cplb.h
@@ -31,7 +31,7 @@
 #define _CPLB_H
 
 #include <asm/blackfin.h>
-#include <asm/mach/anomaly.h>
+#include <mach/anomaly.h>
 
 #define SDRAM_IGENERIC    (CPLB_L1_CHBL | CPLB_USER_RD | CPLB_VALID | CPLB_PORTPRIO)
 #define SDRAM_IKERNEL     (SDRAM_IGENERIC | CPLB_LOCK)
diff --git a/include/asm-blackfin/cplbinit.h b/arch/blackfin/include/asm/cplbinit.h
index 0eb1c1b685a7..0eb1c1b685a7 100644
--- a/include/asm-blackfin/cplbinit.h
+++ b/arch/blackfin/include/asm/cplbinit.h
diff --git a/include/asm-blackfin/cpumask.h b/arch/blackfin/include/asm/cpumask.h
index b20a8e9012cb..b20a8e9012cb 100644
--- a/include/asm-blackfin/cpumask.h
+++ b/arch/blackfin/include/asm/cpumask.h
diff --git a/include/asm-blackfin/cputime.h b/arch/blackfin/include/asm/cputime.h
index 2b19705f9885..2b19705f9885 100644
--- a/include/asm-blackfin/cputime.h
+++ b/arch/blackfin/include/asm/cputime.h
diff --git a/include/asm-blackfin/current.h b/arch/blackfin/include/asm/current.h
index 31918d29122c..31918d29122c 100644
--- a/include/asm-blackfin/current.h
+++ b/arch/blackfin/include/asm/current.h
diff --git a/include/asm-blackfin/mach-common/def_LPBlackfin.h b/arch/blackfin/include/asm/def_LPBlackfin.h
index e8967f6124f7..6341eebff3dc 100644
--- a/include/asm-blackfin/mach-common/def_LPBlackfin.h
+++ b/arch/blackfin/include/asm/def_LPBlackfin.h
@@ -31,7 +31,7 @@
 #ifndef _DEF_LPBLACKFIN_H
 #define _DEF_LPBLACKFIN_H
 
-#include <asm/mach/anomaly.h>
+#include <mach/anomaly.h>
 
 #define MK_BMSK_(x) (1<<x)
 
diff --git a/arch/blackfin/include/asm/delay.h b/arch/blackfin/include/asm/delay.h
new file mode 100644
index 000000000000..0889c3abb593
--- /dev/null
+++ b/arch/blackfin/include/asm/delay.h
@@ -0,0 +1,62 @@
+/*
+ * delay.h - delay functions
+ *
+ * Copyright (c) 2004-2007 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#ifndef __ASM_DELAY_H__
+#define __ASM_DELAY_H__
+
+#include <mach/anomaly.h>
+
+static inline void __delay(unsigned long loops)
+{
+	if (ANOMALY_05000312) {
+		/* Interrupted loads to loop registers -> bad */
+		unsigned long tmp;
+		__asm__ __volatile__(
+			"[--SP] = LC0;"
+			"[--SP] = LT0;"
+			"[--SP] = LB0;"
+			"LSETUP (1f,1f) LC0 = %1;"
+			"1: NOP;"
+			/* We take advantage of the fact that LC0 is 0 at
+			 * the end of the loop.  Otherwise we'd need some
+			 * NOPs after the CLI here.
+			 */
+			"CLI %0;"
+			"LB0 = [SP++];"
+			"LT0 = [SP++];"
+			"LC0 = [SP++];"
+			"STI %0;"
+			: "=d" (tmp)
+			: "a" (loops)
+		);
+	} else
+		__asm__ __volatile__ (
+			"LSETUP(1f, 1f) LC0 = %0;"
+			"1: NOP;"
+			:
+			: "a" (loops)
+			: "LT0", "LB0", "LC0"
+		);
+}
+
+#include <linux/param.h>	/* needed for HZ */
+
+/*
+ * Use only for very small delays ( < 1 msec).  Should probably use a
+ * lookup table, really, as the multiplications take much too long with
+ * short delays.  This is a "reasonable" implementation, though (and the
+ * first constant multiplications gets optimized away if the delay is
+ * a constant)
+ */
+static inline void udelay(unsigned long usecs)
+{
+	extern unsigned long loops_per_jiffy;
+	__delay(usecs * loops_per_jiffy / (1000000 / HZ));
+}
+
+#endif
diff --git a/include/asm-blackfin/device.h b/arch/blackfin/include/asm/device.h
index d8f9872b0e2d..d8f9872b0e2d 100644
--- a/include/asm-blackfin/device.h
+++ b/arch/blackfin/include/asm/device.h
diff --git a/include/asm-blackfin/div64.h b/arch/blackfin/include/asm/div64.h
index 6cd978cefb28..6cd978cefb28 100644
--- a/include/asm-blackfin/div64.h
+++ b/arch/blackfin/include/asm/div64.h
diff --git a/include/asm-blackfin/dma-mapping.h b/arch/blackfin/include/asm/dma-mapping.h
index 1a13c2fc3667..1a13c2fc3667 100644
--- a/include/asm-blackfin/dma-mapping.h
+++ b/arch/blackfin/include/asm/dma-mapping.h
diff --git a/arch/blackfin/include/asm/dma.h b/arch/blackfin/include/asm/dma.h
new file mode 100644
index 000000000000..6509733bb0f6
--- /dev/null
+++ b/arch/blackfin/include/asm/dma.h
@@ -0,0 +1,205 @@
+/*
+ * File:         include/asm-blackfin/simple_bf533_dma.h
+ * Based on:     none - original work
+ * Author:       LG Soft India
+ *               Copyright (C) 2004-2005 Analog Devices Inc.
+ * Created:      Tue Sep 21 2004
+ * Description:  This file contains the major Data structures and constants
+ * 		 used for DMA Implementation in BF533
+ * Modified:
+ *
+ * Bugs:         Enter bugs at http://blackfin.uclinux.org/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; see the file COPYING.
+ * If not, write to the Free Software Foundation,
+ * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ */
+
+#ifndef _BLACKFIN_DMA_H_
+#define _BLACKFIN_DMA_H_
+
+#include <asm/io.h>
+#include <linux/slab.h>
+#include <asm/irq.h>
+#include <asm/signal.h>
+
+#include <linux/kernel.h>
+#include <mach/dma.h>
+#include <linux/mm.h>
+#include <linux/interrupt.h>
+#include <asm/blackfin.h>
+
+#define MAX_DMA_ADDRESS PAGE_OFFSET
+
+/*****************************************************************************
+*        Generic DMA  Declarations
+*
+****************************************************************************/
+enum dma_chan_status {
+	DMA_CHANNEL_FREE,
+	DMA_CHANNEL_REQUESTED,
+	DMA_CHANNEL_ENABLED,
+};
+
+/*-------------------------
+ * config reg bits value
+ *-------------------------*/
+#define DATA_SIZE_8 		0
+#define DATA_SIZE_16 		1
+#define DATA_SIZE_32 		2
+
+#define DMA_FLOW_STOP 		0
+#define DMA_FLOW_AUTO 		1
+#define DMA_FLOW_ARRAY 		4
+#define DMA_FLOW_SMALL 		6
+#define DMA_FLOW_LARGE 		7
+
+#define DIMENSION_LINEAR    0
+#define DIMENSION_2D           1
+
+#define DIR_READ     0
+#define DIR_WRITE    1
+
+#define INTR_DISABLE   0
+#define INTR_ON_BUF    2
+#define INTR_ON_ROW    3
+
+#define DMA_NOSYNC_KEEP_DMA_BUF	0
+#define DMA_SYNC_RESTART	1
+
+struct dmasg {
+	unsigned long next_desc_addr;
+	unsigned long start_addr;
+	unsigned short cfg;
+	unsigned short x_count;
+	short x_modify;
+	unsigned short y_count;
+	short y_modify;
+} __attribute__((packed));
+
+struct dma_register {
+	unsigned long next_desc_ptr;	/* DMA Next Descriptor Pointer register */
+	unsigned long start_addr;	/* DMA Start address  register */
+
+	unsigned short cfg;	/* DMA Configuration register */
+	unsigned short dummy1;	/* DMA Configuration register */
+
+	unsigned long reserved;
+
+	unsigned short x_count;	/* DMA x_count register */
+	unsigned short dummy2;
+
+	short x_modify;	/* DMA x_modify register */
+	unsigned short dummy3;
+
+	unsigned short y_count;	/* DMA y_count register */
+	unsigned short dummy4;
+
+	short y_modify;	/* DMA y_modify register */
+	unsigned short dummy5;
+
+	unsigned long curr_desc_ptr;	/* DMA Current Descriptor Pointer
+					   register */
+	unsigned long curr_addr_ptr;	/* DMA Current Address Pointer
+						   register */
+	unsigned short irq_status;	/* DMA irq status register */
+	unsigned short dummy6;
+
+	unsigned short peripheral_map;	/* DMA peripheral map register */
+	unsigned short dummy7;
+
+	unsigned short curr_x_count;	/* DMA Current x-count register */
+	unsigned short dummy8;
+
+	unsigned long reserved2;
+
+	unsigned short curr_y_count;	/* DMA Current y-count register */
+	unsigned short dummy9;
+
+	unsigned long reserved3;
+
+};
+
+typedef irqreturn_t(*dma_interrupt_t) (int irq, void *dev_id);
+
+struct dma_channel {
+	struct mutex dmalock;
+	char *device_id;
+	enum dma_chan_status chan_status;
+	struct dma_register *regs;
+	struct dmasg *sg;		/* large mode descriptor */
+	unsigned int ctrl_num;	/* controller number */
+	dma_interrupt_t irq_callback;
+	void *data;
+	unsigned int dma_enable_flag;
+	unsigned int loopback_flag;
+#ifdef CONFIG_PM
+	unsigned short saved_peripheral_map;
+#endif
+};
+
+#ifdef CONFIG_PM
+int blackfin_dma_suspend(void);
+void blackfin_dma_resume(void);
+#endif
+
+/*******************************************************************************
+*	DMA API's
+*******************************************************************************/
+/* functions to set register mode */
+void set_dma_start_addr(unsigned int channel, unsigned long addr);
+void set_dma_next_desc_addr(unsigned int channel, unsigned long addr);
+void set_dma_curr_desc_addr(unsigned int channel, unsigned long addr);
+void set_dma_x_count(unsigned int channel, unsigned short x_count);
+void set_dma_x_modify(unsigned int channel, short x_modify);
+void set_dma_y_count(unsigned int channel, unsigned short y_count);
+void set_dma_y_modify(unsigned int channel, short y_modify);
+void set_dma_config(unsigned int channel, unsigned short config);
+unsigned short set_bfin_dma_config(char direction, char flow_mode,
+				   char intr_mode, char dma_mode, char width,
+				   char syncmode);
+void set_dma_curr_addr(unsigned int channel, unsigned long addr);
+
+/* get curr status for polling */
+unsigned short get_dma_curr_irqstat(unsigned int channel);
+unsigned short get_dma_curr_xcount(unsigned int channel);
+unsigned short get_dma_curr_ycount(unsigned int channel);
+unsigned long get_dma_next_desc_ptr(unsigned int channel);
+unsigned long get_dma_curr_desc_ptr(unsigned int channel);
+unsigned long get_dma_curr_addr(unsigned int channel);
+
+/* set large DMA mode descriptor */
+void set_dma_sg(unsigned int channel, struct dmasg *sg, int nr_sg);
+
+/* check if current channel is in use */
+int dma_channel_active(unsigned int channel);
+
+/* common functions must be called in any mode */
+void free_dma(unsigned int channel);
+int dma_channel_active(unsigned int channel); /* check if a channel is in use */
+void disable_dma(unsigned int channel);
+void enable_dma(unsigned int channel);
+int request_dma(unsigned int channel, char *device_id);
+int set_dma_callback(unsigned int channel, dma_interrupt_t callback,
+		     void *data);
+void dma_disable_irq(unsigned int channel);
+void dma_enable_irq(unsigned int channel);
+void clear_dma_irqstat(unsigned int channel);
+void *dma_memcpy(void *dest, const void *src, size_t count);
+void *safe_dma_memcpy(void *dest, const void *src, size_t count);
+
+extern int channel2irq(unsigned int channel);
+extern struct dma_register *dma_io_base_addr[MAX_BLACKFIN_DMA_CHANNEL];
+
+#endif
diff --git a/arch/blackfin/include/asm/dpmc.h b/arch/blackfin/include/asm/dpmc.h
new file mode 100644
index 000000000000..96e8208f929a
--- /dev/null
+++ b/arch/blackfin/include/asm/dpmc.h
@@ -0,0 +1,57 @@
+/*
+ * include/asm-blackfin/dpmc.h -  Miscellaneous IOCTL commands for Dynamic Power
+ *   			 	Management Controller Driver.
+ * Copyright (C) 2004-2008 Analog Device Inc.
+ *
+ */
+#ifndef _BLACKFIN_DPMC_H_
+#define _BLACKFIN_DPMC_H_
+
+#ifdef __KERNEL__
+#ifndef __ASSEMBLY__
+
+void sleep_mode(u32 sic_iwr0, u32 sic_iwr1, u32 sic_iwr2);
+void hibernate_mode(u32 sic_iwr0, u32 sic_iwr1, u32 sic_iwr2);
+void sleep_deeper(u32 sic_iwr0, u32 sic_iwr1, u32 sic_iwr2);
+void do_hibernate(int wakeup);
+void set_dram_srfs(void);
+void unset_dram_srfs(void);
+
+#define VRPAIR(vlev, freq) (((vlev) << 16) | ((freq) >> 16))
+
+struct bfin_dpmc_platform_data {
+	const unsigned int *tuple_tab;
+	unsigned short tabsize;
+	unsigned short vr_settling_time; /* in us */
+};
+
+#else
+
+#define PM_PUSH(x) \
+	R0 = [P0 + (x - SRAM_BASE_ADDRESS)];\
+	[--SP] =  R0;\
+
+#define PM_POP(x) \
+	R0 = [SP++];\
+	[P0 + (x - SRAM_BASE_ADDRESS)] = R0;\
+
+#define PM_SYS_PUSH(x) \
+	R0 = [P0 + (x - PLL_CTL)];\
+	[--SP] =  R0;\
+
+#define PM_SYS_POP(x) \
+	R0 = [SP++];\
+	[P0 + (x - PLL_CTL)] = R0;\
+
+#define PM_SYS_PUSH16(x) \
+	R0 = w[P0 + (x - PLL_CTL)];\
+	[--SP] =  R0;\
+
+#define PM_SYS_POP16(x) \
+	R0 = [SP++];\
+	w[P0 + (x - PLL_CTL)] = R0;\
+
+#endif
+#endif	/* __KERNEL__ */
+
+#endif	/*_BLACKFIN_DPMC_H_*/
diff --git a/include/asm-blackfin/early_printk.h b/arch/blackfin/include/asm/early_printk.h
index 110f1c1f845c..110f1c1f845c 100644
--- a/include/asm-blackfin/early_printk.h
+++ b/arch/blackfin/include/asm/early_printk.h
diff --git a/arch/blackfin/include/asm/elf.h b/arch/blackfin/include/asm/elf.h
new file mode 100644
index 000000000000..67a03a8a353e
--- /dev/null
+++ b/arch/blackfin/include/asm/elf.h
@@ -0,0 +1,127 @@
+/* Changes made by  LG Soft Oct 2004*/
+
+#ifndef __ASMBFIN_ELF_H
+#define __ASMBFIN_ELF_H
+
+/*
+ * ELF register definitions..
+ */
+
+#include <asm/ptrace.h>
+#include <asm/user.h>
+
+/* Processor specific flags for the ELF header e_flags field.  */
+#define EF_BFIN_PIC		0x00000001	/* -fpic */
+#define EF_BFIN_FDPIC		0x00000002	/* -mfdpic */
+#define EF_BFIN_CODE_IN_L1	0x00000010	/* --code-in-l1 */
+#define EF_BFIN_DATA_IN_L1	0x00000020	/* --data-in-l1 */
+#define EF_BFIN_CODE_IN_L2	0x00000040	/* --code-in-l2 */
+#define EF_BFIN_DATA_IN_L2	0x00000080	/* --data-in-l2 */
+
+typedef unsigned long elf_greg_t;
+
+#define ELF_NGREG (sizeof(struct user_regs_struct) / sizeof(elf_greg_t))
+typedef elf_greg_t elf_gregset_t[ELF_NGREG];
+
+typedef struct user_bfinfp_struct elf_fpregset_t;
+/*
+ * This is used to ensure we don't load something for the wrong architecture.
+ */
+#define elf_check_arch(x) ((x)->e_machine == EM_BLACKFIN)
+
+#define elf_check_fdpic(x) ((x)->e_flags & EF_BFIN_FDPIC /* && !((x)->e_flags & EF_FRV_NON_PIC_RELOCS) */)
+#define elf_check_const_displacement(x) ((x)->e_flags & EF_BFIN_PIC)
+
+/* EM_BLACKFIN defined in linux/elf.h	*/
+
+/*
+ * These are used to set parameters in the core dumps.
+ */
+#define ELF_CLASS	ELFCLASS32
+#define ELF_DATA	ELFDATA2LSB
+#define ELF_ARCH	EM_BLACKFIN
+
+#define ELF_PLAT_INIT(_r)	_r->p1 = 0
+
+#define ELF_FDPIC_PLAT_INIT(_regs, _exec_map_addr, _interp_map_addr, _dynamic_addr)	\
+do {											\
+	_regs->r7	= 0;						\
+	_regs->p0	= _exec_map_addr;				\
+	_regs->p1	= _interp_map_addr;				\
+	_regs->p2	= _dynamic_addr;				\
+} while(0)
+
+#define USE_ELF_CORE_DUMP
+#define ELF_FDPIC_CORE_EFLAGS	EF_BFIN_FDPIC
+#define ELF_EXEC_PAGESIZE	4096
+
+#define	R_unused0	0	/* relocation type 0 is not defined */
+#define R_pcrel5m2	1	/*LSETUP part a */
+#define R_unused1	2	/* relocation type 2 is not defined */
+#define R_pcrel10	3	/* type 3, if cc jump <target>  */
+#define R_pcrel12_jump	4	/* type 4, jump <target> */
+#define R_rimm16	5	/* type 0x5, rN = <target> */
+#define R_luimm16	6	/* # 0x6, preg.l=<target> Load imm 16 to lower half */
+#define R_huimm16  	7	/* # 0x7, preg.h=<target> Load imm 16 to upper half */
+#define R_pcrel12_jump_s 8	/* # 0x8 jump.s <target> */
+#define R_pcrel24_jump_x 9	/* # 0x9 jump.x <target> */
+#define R_pcrel24       10	/* # 0xa call <target> , not expandable */
+#define R_unusedb       11	/* # 0xb not generated */
+#define R_unusedc       12	/* # 0xc  not used */
+#define R_pcrel24_jump_l 13	/*0xd jump.l <target> */
+#define R_pcrel24_call_x 14	/* 0xE, call.x <target> if <target> is above 24 bit limit call through P1 */
+#define R_var_eq_symb    15	/* 0xf, linker should treat it same as 0x12 */
+#define R_byte_data      16	/* 0x10, .byte var = symbol */
+#define R_byte2_data     17	/* 0x11, .byte2 var = symbol */
+#define R_byte4_data     18	/* 0x12, .byte4 var = symbol and .var var=symbol */
+#define R_pcrel11        19	/* 0x13, lsetup part b */
+#define R_unused14      20	/* 0x14, undefined */
+#define R_unused15       21	/* not generated by VDSP 3.5 */
+
+/* arithmetic relocations */
+#define R_push		 0xE0
+#define R_const		 0xE1
+#define R_add		 0xE2
+#define R_sub		 0xE3
+#define R_mult		 0xE4
+#define R_div		 0xE5
+#define R_mod		 0xE6
+#define R_lshift	 0xE7
+#define R_rshift	 0xE8
+#define R_and		 0xE9
+#define R_or		 0xEA
+#define R_xor		 0xEB
+#define R_land		 0xEC
+#define R_lor		 0xED
+#define R_len		 0xEE
+#define R_neg		 0xEF
+#define R_comp		 0xF0
+#define R_page		 0xF1
+#define R_hwpage	 0xF2
+#define R_addr		 0xF3
+
+/* This is the location that an ET_DYN program is loaded if exec'ed.  Typical
+   use of this is to invoke "./ld.so someprog" to test out a new version of
+   the loader.  We need to make sure that it is out of the way of the program
+   that it will "exec", and that there is sufficient room for the brk.  */
+
+#define ELF_ET_DYN_BASE         0xD0000000UL
+
+#define ELF_CORE_COPY_REGS(pr_reg, regs)	\
+        memcpy((char *) &pr_reg, (char *)regs,  \
+               sizeof(struct pt_regs));
+
+/* This yields a mask that user programs can use to figure out what
+   instruction set this cpu supports.  */
+
+#define ELF_HWCAP	(0)
+
+/* This yields a string that ld.so will use to load implementation
+   specific libraries for optimization.  This is more specific in
+   intent than poking at uname or /proc/cpuinfo.  */
+
+#define ELF_PLATFORM  (NULL)
+
+#define SET_PERSONALITY(ex, ibcs2) set_personality((ibcs2)?PER_SVR4:PER_LINUX)
+
+#endif
diff --git a/include/asm-blackfin/emergency-restart.h b/arch/blackfin/include/asm/emergency-restart.h
index 27f6c785d103..27f6c785d103 100644
--- a/include/asm-blackfin/emergency-restart.h
+++ b/arch/blackfin/include/asm/emergency-restart.h
diff --git a/include/asm-blackfin/entry.h b/arch/blackfin/include/asm/entry.h
index c4f721e0d00d..c4f721e0d00d 100644
--- a/include/asm-blackfin/entry.h
+++ b/arch/blackfin/include/asm/entry.h
diff --git a/include/asm-blackfin/errno.h b/arch/blackfin/include/asm/errno.h
index 164e4f39bb57..164e4f39bb57 100644
--- a/include/asm-blackfin/errno.h
+++ b/arch/blackfin/include/asm/errno.h
diff --git a/include/asm-blackfin/fb.h b/arch/blackfin/include/asm/fb.h
index c7df38030992..c7df38030992 100644
--- a/include/asm-blackfin/fb.h
+++ b/arch/blackfin/include/asm/fb.h
diff --git a/include/asm-blackfin/fcntl.h b/arch/blackfin/include/asm/fcntl.h
index 9c4037127857..9c4037127857 100644
--- a/include/asm-blackfin/fcntl.h
+++ b/arch/blackfin/include/asm/fcntl.h
diff --git a/arch/blackfin/include/asm/fixed_code.h b/arch/blackfin/include/asm/fixed_code.h
new file mode 100644
index 000000000000..32c4d495d847
--- /dev/null
+++ b/arch/blackfin/include/asm/fixed_code.h
@@ -0,0 +1,46 @@
+/* This file defines the fixed addresses where userspace programs can find
+   atomic code sequences.  */
+
+#ifndef __BFIN_ASM_FIXED_CODE_H__
+#define __BFIN_ASM_FIXED_CODE_H__
+
+#ifdef __KERNEL__
+#ifndef __ASSEMBLY__
+#include <linux/linkage.h>
+#include <linux/ptrace.h>
+extern asmlinkage void finish_atomic_sections(struct pt_regs *regs);
+extern char fixed_code_start;
+extern char fixed_code_end;
+extern int atomic_xchg32(void);
+extern int atomic_cas32(void);
+extern int atomic_add32(void);
+extern int atomic_sub32(void);
+extern int atomic_ior32(void);
+extern int atomic_and32(void);
+extern int atomic_xor32(void);
+extern void safe_user_instruction(void);
+extern void sigreturn_stub(void);
+#endif
+#endif
+
+#define FIXED_CODE_START	0x400
+
+#define SIGRETURN_STUB		0x400
+
+#define ATOMIC_SEQS_START	0x410
+
+#define ATOMIC_XCHG32		0x410
+#define ATOMIC_CAS32		0x420
+#define ATOMIC_ADD32		0x430
+#define ATOMIC_SUB32		0x440
+#define ATOMIC_IOR32		0x450
+#define ATOMIC_AND32		0x460
+#define ATOMIC_XOR32		0x470
+
+#define ATOMIC_SEQS_END		0x480
+
+#define SAFE_USER_INSTRUCTION   0x480
+
+#define FIXED_CODE_END		0x490
+
+#endif
diff --git a/include/asm-blackfin/flat.h b/arch/blackfin/include/asm/flat.h
index e70074e05f4e..e70074e05f4e 100644
--- a/include/asm-blackfin/flat.h
+++ b/arch/blackfin/include/asm/flat.h
diff --git a/include/asm-blackfin/futex.h b/arch/blackfin/include/asm/futex.h
index 6a332a9f099c..6a332a9f099c 100644
--- a/include/asm-blackfin/futex.h
+++ b/arch/blackfin/include/asm/futex.h
diff --git a/arch/blackfin/include/asm/gpio.h b/arch/blackfin/include/asm/gpio.h
new file mode 100644
index 000000000000..ad33ac271fd9
--- /dev/null
+++ b/arch/blackfin/include/asm/gpio.h
@@ -0,0 +1,456 @@
+/*
+ * File:         arch/blackfin/kernel/bfin_gpio.h
+ * Based on:
+ * Author:	 Michael Hennerich (hennerich@blackfin.uclinux.org)
+ *
+ * Created:
+ * Description:
+ *
+ * Modified:
+ *               Copyright 2004-2008 Analog Devices Inc.
+ *
+ * Bugs:         Enter bugs at http://blackfin.uclinux.org/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see the file COPYING, or write
+ * to the Free Software Foundation, Inc.,
+ * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ */
+
+/*
+*  Number     BF537/6/4    BF561    BF533/2/1
+*             BF527/5/2
+*
+*  GPIO_0       PF0         PF0        PF0
+*  GPIO_1       PF1         PF1        PF1
+*  GPIO_2       PF2         PF2        PF2
+*  GPIO_3       PF3         PF3        PF3
+*  GPIO_4       PF4         PF4        PF4
+*  GPIO_5       PF5         PF5        PF5
+*  GPIO_6       PF6         PF6        PF6
+*  GPIO_7       PF7         PF7        PF7
+*  GPIO_8       PF8         PF8        PF8
+*  GPIO_9       PF9         PF9        PF9
+*  GPIO_10      PF10        PF10       PF10
+*  GPIO_11      PF11        PF11       PF11
+*  GPIO_12      PF12        PF12       PF12
+*  GPIO_13      PF13        PF13       PF13
+*  GPIO_14      PF14        PF14       PF14
+*  GPIO_15      PF15        PF15       PF15
+*  GPIO_16      PG0         PF16
+*  GPIO_17      PG1         PF17
+*  GPIO_18      PG2         PF18
+*  GPIO_19      PG3         PF19
+*  GPIO_20      PG4         PF20
+*  GPIO_21      PG5         PF21
+*  GPIO_22      PG6         PF22
+*  GPIO_23      PG7         PF23
+*  GPIO_24      PG8         PF24
+*  GPIO_25      PG9         PF25
+*  GPIO_26      PG10        PF26
+*  GPIO_27      PG11        PF27
+*  GPIO_28      PG12        PF28
+*  GPIO_29      PG13        PF29
+*  GPIO_30      PG14        PF30
+*  GPIO_31      PG15        PF31
+*  GPIO_32      PH0         PF32
+*  GPIO_33      PH1         PF33
+*  GPIO_34      PH2         PF34
+*  GPIO_35      PH3         PF35
+*  GPIO_36      PH4         PF36
+*  GPIO_37      PH5         PF37
+*  GPIO_38      PH6         PF38
+*  GPIO_39      PH7         PF39
+*  GPIO_40      PH8         PF40
+*  GPIO_41      PH9         PF41
+*  GPIO_42      PH10        PF42
+*  GPIO_43      PH11        PF43
+*  GPIO_44      PH12        PF44
+*  GPIO_45      PH13        PF45
+*  GPIO_46      PH14        PF46
+*  GPIO_47      PH15        PF47
+*/
+
+#ifndef __ARCH_BLACKFIN_GPIO_H__
+#define __ARCH_BLACKFIN_GPIO_H__
+
+#define gpio_bank(x) ((x) >> 4)
+#define gpio_bit(x)  (1<<((x) & 0xF))
+#define gpio_sub_n(x) ((x) & 0xF)
+
+#define GPIO_BANKSIZE 16
+
+#define	GPIO_0	0
+#define	GPIO_1	1
+#define	GPIO_2	2
+#define	GPIO_3	3
+#define	GPIO_4	4
+#define	GPIO_5	5
+#define	GPIO_6	6
+#define	GPIO_7	7
+#define	GPIO_8	8
+#define	GPIO_9	9
+#define	GPIO_10	10
+#define	GPIO_11	11
+#define	GPIO_12	12
+#define	GPIO_13	13
+#define	GPIO_14	14
+#define	GPIO_15	15
+#define	GPIO_16	16
+#define	GPIO_17	17
+#define	GPIO_18	18
+#define	GPIO_19	19
+#define	GPIO_20	20
+#define	GPIO_21	21
+#define	GPIO_22	22
+#define	GPIO_23	23
+#define	GPIO_24	24
+#define	GPIO_25	25
+#define	GPIO_26	26
+#define	GPIO_27	27
+#define	GPIO_28	28
+#define	GPIO_29	29
+#define	GPIO_30	30
+#define	GPIO_31	31
+#define	GPIO_32	32
+#define	GPIO_33	33
+#define	GPIO_34	34
+#define	GPIO_35	35
+#define	GPIO_36	36
+#define	GPIO_37	37
+#define	GPIO_38	38
+#define	GPIO_39	39
+#define	GPIO_40	40
+#define	GPIO_41	41
+#define	GPIO_42	42
+#define	GPIO_43	43
+#define	GPIO_44	44
+#define	GPIO_45	45
+#define	GPIO_46	46
+#define	GPIO_47	47
+
+
+#define PERIPHERAL_USAGE 1
+#define GPIO_USAGE 0
+
+#ifdef BF533_FAMILY
+#define MAX_BLACKFIN_GPIOS 16
+
+#define	GPIO_PF0	0
+#define	GPIO_PF1	1
+#define	GPIO_PF2	2
+#define	GPIO_PF3	3
+#define	GPIO_PF4	4
+#define	GPIO_PF5	5
+#define	GPIO_PF6	6
+#define	GPIO_PF7	7
+#define	GPIO_PF8	8
+#define	GPIO_PF9	9
+#define	GPIO_PF10	10
+#define	GPIO_PF11	11
+#define	GPIO_PF12	12
+#define	GPIO_PF13	13
+#define	GPIO_PF14	14
+#define	GPIO_PF15	15
+
+#endif
+
+#if defined(BF527_FAMILY) || defined(BF537_FAMILY)
+#define MAX_BLACKFIN_GPIOS 48
+
+#define	GPIO_PF0	0
+#define	GPIO_PF1	1
+#define	GPIO_PF2	2
+#define	GPIO_PF3	3
+#define	GPIO_PF4	4
+#define	GPIO_PF5	5
+#define	GPIO_PF6	6
+#define	GPIO_PF7	7
+#define	GPIO_PF8	8
+#define	GPIO_PF9	9
+#define	GPIO_PF10	10
+#define	GPIO_PF11	11
+#define	GPIO_PF12	12
+#define	GPIO_PF13	13
+#define	GPIO_PF14	14
+#define	GPIO_PF15	15
+#define	GPIO_PG0	16
+#define	GPIO_PG1	17
+#define	GPIO_PG2	18
+#define	GPIO_PG3	19
+#define	GPIO_PG4	20
+#define	GPIO_PG5	21
+#define	GPIO_PG6	22
+#define	GPIO_PG7	23
+#define	GPIO_PG8	24
+#define	GPIO_PG9	25
+#define	GPIO_PG10      	26
+#define	GPIO_PG11      	27
+#define	GPIO_PG12      	28
+#define	GPIO_PG13      	29
+#define	GPIO_PG14      	30
+#define	GPIO_PG15      	31
+#define	GPIO_PH0	32
+#define	GPIO_PH1	33
+#define	GPIO_PH2	34
+#define	GPIO_PH3	35
+#define	GPIO_PH4	36
+#define	GPIO_PH5	37
+#define	GPIO_PH6	38
+#define	GPIO_PH7	39
+#define	GPIO_PH8	40
+#define	GPIO_PH9	41
+#define	GPIO_PH10      	42
+#define	GPIO_PH11      	43
+#define	GPIO_PH12      	44
+#define	GPIO_PH13      	45
+#define	GPIO_PH14      	46
+#define	GPIO_PH15      	47
+
+#define PORT_F GPIO_PF0
+#define PORT_G GPIO_PG0
+#define PORT_H GPIO_PH0
+
+#endif
+
+#ifdef BF548_FAMILY
+#include <mach/gpio.h>
+#endif
+
+#ifdef BF561_FAMILY
+#define MAX_BLACKFIN_GPIOS 48
+
+#define	GPIO_PF0	0
+#define	GPIO_PF1	1
+#define	GPIO_PF2	2
+#define	GPIO_PF3	3
+#define	GPIO_PF4	4
+#define	GPIO_PF5	5
+#define	GPIO_PF6	6
+#define	GPIO_PF7	7
+#define	GPIO_PF8	8
+#define	GPIO_PF9	9
+#define	GPIO_PF10	10
+#define	GPIO_PF11	11
+#define	GPIO_PF12	12
+#define	GPIO_PF13	13
+#define	GPIO_PF14	14
+#define	GPIO_PF15	15
+#define	GPIO_PF16	16
+#define	GPIO_PF17	17
+#define	GPIO_PF18	18
+#define	GPIO_PF19	19
+#define	GPIO_PF20	20
+#define	GPIO_PF21	21
+#define	GPIO_PF22	22
+#define	GPIO_PF23	23
+#define	GPIO_PF24	24
+#define	GPIO_PF25	25
+#define	GPIO_PF26	26
+#define	GPIO_PF27	27
+#define	GPIO_PF28	28
+#define	GPIO_PF29	29
+#define	GPIO_PF30	30
+#define	GPIO_PF31	31
+#define	GPIO_PF32	32
+#define	GPIO_PF33	33
+#define	GPIO_PF34	34
+#define	GPIO_PF35	35
+#define	GPIO_PF36	36
+#define	GPIO_PF37	37
+#define	GPIO_PF38	38
+#define	GPIO_PF39	39
+#define	GPIO_PF40	40
+#define	GPIO_PF41	41
+#define	GPIO_PF42	42
+#define	GPIO_PF43	43
+#define	GPIO_PF44	44
+#define	GPIO_PF45	45
+#define	GPIO_PF46	46
+#define	GPIO_PF47	47
+
+#define PORT_FIO0 GPIO_0
+#define PORT_FIO1 GPIO_16
+#define PORT_FIO2 GPIO_32
+#endif
+
+#ifndef __ASSEMBLY__
+
+/***********************************************************
+*
+* FUNCTIONS: Blackfin General Purpose Ports Access Functions
+*
+* INPUTS/OUTPUTS:
+* gpio - GPIO Number between 0 and MAX_BLACKFIN_GPIOS
+*
+*
+* DESCRIPTION: These functions abstract direct register access
+*              to Blackfin processor General Purpose
+*              Ports Regsiters
+*
+* CAUTION: These functions do not belong to the GPIO Driver API
+*************************************************************
+* MODIFICATION HISTORY :
+**************************************************************/
+
+#ifndef BF548_FAMILY
+void set_gpio_dir(unsigned, unsigned short);
+void set_gpio_inen(unsigned, unsigned short);
+void set_gpio_polar(unsigned, unsigned short);
+void set_gpio_edge(unsigned, unsigned short);
+void set_gpio_both(unsigned, unsigned short);
+void set_gpio_data(unsigned, unsigned short);
+void set_gpio_maska(unsigned, unsigned short);
+void set_gpio_maskb(unsigned, unsigned short);
+void set_gpio_toggle(unsigned);
+void set_gpiop_dir(unsigned, unsigned short);
+void set_gpiop_inen(unsigned, unsigned short);
+void set_gpiop_polar(unsigned, unsigned short);
+void set_gpiop_edge(unsigned, unsigned short);
+void set_gpiop_both(unsigned, unsigned short);
+void set_gpiop_data(unsigned, unsigned short);
+void set_gpiop_maska(unsigned, unsigned short);
+void set_gpiop_maskb(unsigned, unsigned short);
+unsigned short get_gpio_dir(unsigned);
+unsigned short get_gpio_inen(unsigned);
+unsigned short get_gpio_polar(unsigned);
+unsigned short get_gpio_edge(unsigned);
+unsigned short get_gpio_both(unsigned);
+unsigned short get_gpio_maska(unsigned);
+unsigned short get_gpio_maskb(unsigned);
+unsigned short get_gpio_data(unsigned);
+unsigned short get_gpiop_dir(unsigned);
+unsigned short get_gpiop_inen(unsigned);
+unsigned short get_gpiop_polar(unsigned);
+unsigned short get_gpiop_edge(unsigned);
+unsigned short get_gpiop_both(unsigned);
+unsigned short get_gpiop_maska(unsigned);
+unsigned short get_gpiop_maskb(unsigned);
+unsigned short get_gpiop_data(unsigned);
+
+struct gpio_port_t {
+	unsigned short data;
+	unsigned short dummy1;
+	unsigned short data_clear;
+	unsigned short dummy2;
+	unsigned short data_set;
+	unsigned short dummy3;
+	unsigned short toggle;
+	unsigned short dummy4;
+	unsigned short maska;
+	unsigned short dummy5;
+	unsigned short maska_clear;
+	unsigned short dummy6;
+	unsigned short maska_set;
+	unsigned short dummy7;
+	unsigned short maska_toggle;
+	unsigned short dummy8;
+	unsigned short maskb;
+	unsigned short dummy9;
+	unsigned short maskb_clear;
+	unsigned short dummy10;
+	unsigned short maskb_set;
+	unsigned short dummy11;
+	unsigned short maskb_toggle;
+	unsigned short dummy12;
+	unsigned short dir;
+	unsigned short dummy13;
+	unsigned short polar;
+	unsigned short dummy14;
+	unsigned short edge;
+	unsigned short dummy15;
+	unsigned short both;
+	unsigned short dummy16;
+	unsigned short inen;
+};
+#endif
+
+#ifdef CONFIG_PM
+
+unsigned int bfin_pm_standby_setup(void);
+void bfin_pm_standby_restore(void);
+
+void bfin_gpio_pm_hibernate_restore(void);
+void bfin_gpio_pm_hibernate_suspend(void);
+
+#ifndef CONFIG_BF54x
+#define PM_WAKE_RISING	0x1
+#define PM_WAKE_FALLING	0x2
+#define PM_WAKE_HIGH	0x4
+#define PM_WAKE_LOW	0x8
+#define PM_WAKE_BOTH_EDGES	(PM_WAKE_RISING | PM_WAKE_FALLING)
+#define PM_WAKE_IGNORE	0xF0
+
+int gpio_pm_wakeup_request(unsigned gpio, unsigned char type);
+void gpio_pm_wakeup_free(unsigned gpio);
+
+struct gpio_port_s {
+	unsigned short data;
+	unsigned short maska;
+	unsigned short maskb;
+	unsigned short dir;
+	unsigned short polar;
+	unsigned short edge;
+	unsigned short both;
+	unsigned short inen;
+
+	unsigned short fer;
+	unsigned short reserved;
+	unsigned short mux;
+};
+#endif /*CONFIG_BF54x*/
+#endif /*CONFIG_PM*/
+/***********************************************************
+*
+* FUNCTIONS: Blackfin GPIO Driver
+*
+* INPUTS/OUTPUTS:
+* gpio - GPIO Number between 0 and MAX_BLACKFIN_GPIOS
+*
+*
+* DESCRIPTION: Blackfin GPIO Driver API
+*
+* CAUTION:
+*************************************************************
+* MODIFICATION HISTORY :
+**************************************************************/
+
+int gpio_request(unsigned, const char *);
+void gpio_free(unsigned);
+
+void gpio_set_value(unsigned gpio, int arg);
+int gpio_get_value(unsigned gpio);
+
+#ifndef BF548_FAMILY
+#define gpio_set_value(gpio, value)	set_gpio_data(gpio, value)
+#endif
+
+int gpio_direction_input(unsigned gpio);
+int gpio_direction_output(unsigned gpio, int value);
+
+#include <asm-generic/gpio.h>		/* cansleep wrappers */
+#include <asm/irq.h>
+
+static inline int gpio_to_irq(unsigned gpio)
+{
+	return (gpio + GPIO_IRQ_BASE);
+}
+
+static inline int irq_to_gpio(unsigned irq)
+{
+	return (irq - GPIO_IRQ_BASE);
+}
+
+#endif /* __ASSEMBLY__ */
+
+#endif /* __ARCH_BLACKFIN_GPIO_H__ */
diff --git a/include/asm-blackfin/gptimers.h b/arch/blackfin/include/asm/gptimers.h
index 0520d2aac8f3..0520d2aac8f3 100644
--- a/include/asm-blackfin/gptimers.h
+++ b/arch/blackfin/include/asm/gptimers.h
diff --git a/include/asm-blackfin/hardirq.h b/arch/blackfin/include/asm/hardirq.h
index b6b19f1b9dab..b6b19f1b9dab 100644
--- a/include/asm-blackfin/hardirq.h
+++ b/arch/blackfin/include/asm/hardirq.h
diff --git a/include/asm-blackfin/hw_irq.h b/arch/blackfin/include/asm/hw_irq.h
index 5b51eaec012c..5b51eaec012c 100644
--- a/include/asm-blackfin/hw_irq.h
+++ b/arch/blackfin/include/asm/hw_irq.h
diff --git a/include/asm-blackfin/io.h b/arch/blackfin/include/asm/io.h
index cbbf7ffdbbff..cbbf7ffdbbff 100644
--- a/include/asm-blackfin/io.h
+++ b/arch/blackfin/include/asm/io.h
diff --git a/include/asm-blackfin/ioctl.h b/arch/blackfin/include/asm/ioctl.h
index b279fe06dfe5..b279fe06dfe5 100644
--- a/include/asm-blackfin/ioctl.h
+++ b/arch/blackfin/include/asm/ioctl.h
diff --git a/include/asm-blackfin/ioctls.h b/arch/blackfin/include/asm/ioctls.h
index 895e3173165d..895e3173165d 100644
--- a/include/asm-blackfin/ioctls.h
+++ b/arch/blackfin/include/asm/ioctls.h
diff --git a/include/asm-blackfin/ipcbuf.h b/arch/blackfin/include/asm/ipcbuf.h
index 8f0899cdf4d2..8f0899cdf4d2 100644
--- a/include/asm-blackfin/ipcbuf.h
+++ b/arch/blackfin/include/asm/ipcbuf.h
diff --git a/arch/blackfin/include/asm/irq.h b/arch/blackfin/include/asm/irq.h
new file mode 100644
index 000000000000..89f59e18af93
--- /dev/null
+++ b/arch/blackfin/include/asm/irq.h
@@ -0,0 +1,72 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file COPYING in the main directory of this archive
+ * for more details.
+ *
+ * Changed by HuTao Apr18, 2003
+ *
+ * Copyright was missing when I got the code so took from MIPS arch ...MaTed---
+ * Copyright (C) 1994 by Waldorf GMBH, written by Ralf Baechle
+ * Copyright (C) 1995, 96, 97, 98, 99, 2000, 2001 by Ralf Baechle
+ *
+ * Adapted for BlackFin (ADI) by Ted Ma <mated@sympatico.ca>
+ * Copyright (c) 2002 Arcturus Networks Inc. (www.arcturusnetworks.com)
+ * Copyright (c) 2002 Lineo, Inc. <mattw@lineo.com>
+ */
+
+#ifndef _BFIN_IRQ_H_
+#define _BFIN_IRQ_H_
+
+#include <mach/irq.h>
+#include <asm/ptrace.h>
+
+/*******************************************************************************
+ *****   INTRODUCTION ***********
+ *   On the Blackfin, the interrupt structure allows remmapping of the hardware
+ *   levels.
+ * - I'm going to assume that the H/W level is going to stay at the default
+ *   settings. If someone wants to go through and abstart this out, feel free
+ *   to mod the interrupt numbering scheme.
+ * - I'm abstracting the interrupts so that uClinux does not know anything
+ *   about the H/W levels. If you want to change the H/W AND keep the abstracted
+ *   levels that uClinux sees, you should be able to do most of it here.
+ * - I've left the "abstract" numbering sparce in case someone wants to pull the
+ *   interrupts apart (just the TX/RX for the various devices)
+ *******************************************************************************/
+
+/* SYS_IRQS and NR_IRQS are defined in <mach-bf5xx/irq.h>*/
+
+/*
+ * Machine specific interrupt sources.
+ *
+ * Adding an interrupt service routine for a source with this bit
+ * set indicates a special machine specific interrupt source.
+ * The machine specific files define these sources.
+ *
+ * The IRQ_MACHSPEC bit is now gone - the only thing it did was to
+ * introduce unnecessary overhead.
+ *
+ * All interrupt handling is actually machine specific so it is better
+ * to use function pointers, as used by the Sparc port, and select the
+ * interrupt handling functions when initializing the kernel. This way
+ * we save some unnecessary overhead at run-time.
+ *                                                      01/11/97 - Jes
+ */
+
+extern void ack_bad_irq(unsigned int irq);
+
+static __inline__ int irq_canonicalize(int irq)
+{
+	return irq;
+}
+
+/* count of spurious interrupts */
+/* extern volatile unsigned int num_spurious; */
+
+#ifndef NO_IRQ
+#define NO_IRQ ((unsigned int)(-1))
+#endif
+
+#define SIC_SYSIRQ(irq)	(irq - (IRQ_CORETMR + 1))
+
+#endif				/* _BFIN_IRQ_H_ */
diff --git a/include/asm-blackfin/irq_handler.h b/arch/blackfin/include/asm/irq_handler.h
index 139b5208f9d8..139b5208f9d8 100644
--- a/include/asm-blackfin/irq_handler.h
+++ b/arch/blackfin/include/asm/irq_handler.h
diff --git a/include/asm-blackfin/irq_regs.h b/arch/blackfin/include/asm/irq_regs.h
index 3dd9c0b70270..3dd9c0b70270 100644
--- a/include/asm-blackfin/irq_regs.h
+++ b/arch/blackfin/include/asm/irq_regs.h
diff --git a/include/asm-blackfin/kdebug.h b/arch/blackfin/include/asm/kdebug.h
index 6ece1b037665..6ece1b037665 100644
--- a/include/asm-blackfin/kdebug.h
+++ b/arch/blackfin/include/asm/kdebug.h
diff --git a/include/asm-blackfin/kgdb.h b/arch/blackfin/include/asm/kgdb.h
index 0f73847fd6bc..0f73847fd6bc 100644
--- a/include/asm-blackfin/kgdb.h
+++ b/arch/blackfin/include/asm/kgdb.h
diff --git a/include/asm-blackfin/kmap_types.h b/arch/blackfin/include/asm/kmap_types.h
index e215f7104974..e215f7104974 100644
--- a/include/asm-blackfin/kmap_types.h
+++ b/arch/blackfin/include/asm/kmap_types.h
diff --git a/include/asm-blackfin/l1layout.h b/arch/blackfin/include/asm/l1layout.h
index c13ded777828..c13ded777828 100644
--- a/include/asm-blackfin/l1layout.h
+++ b/arch/blackfin/include/asm/l1layout.h
diff --git a/include/asm-blackfin/linkage.h b/arch/blackfin/include/asm/linkage.h
index 5a822bb790f7..5a822bb790f7 100644
--- a/include/asm-blackfin/linkage.h
+++ b/arch/blackfin/include/asm/linkage.h
diff --git a/include/asm-blackfin/local.h b/arch/blackfin/include/asm/local.h
index 75afffbc6421..75afffbc6421 100644
--- a/include/asm-blackfin/local.h
+++ b/arch/blackfin/include/asm/local.h
diff --git a/arch/blackfin/include/asm/mem_map.h b/arch/blackfin/include/asm/mem_map.h
new file mode 100644
index 000000000000..88d04a707708
--- /dev/null
+++ b/arch/blackfin/include/asm/mem_map.h
@@ -0,0 +1,12 @@
+/*
+ * mem_map.h
+ * Common header file for blackfin family of processors.
+ *
+ */
+
+#ifndef _MEM_MAP_H_
+#define _MEM_MAP_H_
+
+#include <mach/mem_map.h>
+
+#endif				/* _MEM_MAP_H_ */
diff --git a/include/asm-blackfin/mman.h b/arch/blackfin/include/asm/mman.h
index b58f5ad3f024..b58f5ad3f024 100644
--- a/include/asm-blackfin/mman.h
+++ b/arch/blackfin/include/asm/mman.h
diff --git a/include/asm-blackfin/mmu.h b/arch/blackfin/include/asm/mmu.h
index 757e43906ed4..757e43906ed4 100644
--- a/include/asm-blackfin/mmu.h
+++ b/arch/blackfin/include/asm/mmu.h
diff --git a/arch/blackfin/include/asm/mmu_context.h b/arch/blackfin/include/asm/mmu_context.h
new file mode 100644
index 000000000000..8529552a981f
--- /dev/null
+++ b/arch/blackfin/include/asm/mmu_context.h
@@ -0,0 +1,183 @@
+/*
+ * File:         include/asm-blackfin/mmu_context.h
+ * Based on:
+ * Author:
+ *
+ * Created:
+ * Description:
+ *
+ * Modified:
+ *               Copyright 2004-2006 Analog Devices Inc.
+ *
+ * Bugs:         Enter bugs at http://blackfin.uclinux.org/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see the file COPYING, or write
+ * to the Free Software Foundation, Inc.,
+ * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ */
+
+#ifndef __BLACKFIN_MMU_CONTEXT_H__
+#define __BLACKFIN_MMU_CONTEXT_H__
+
+#include <linux/gfp.h>
+#include <linux/sched.h>
+#include <asm/setup.h>
+#include <asm/page.h>
+#include <asm/pgalloc.h>
+#include <asm/cplbinit.h>
+
+extern void *current_l1_stack_save;
+extern int nr_l1stack_tasks;
+extern void *l1_stack_base;
+extern unsigned long l1_stack_len;
+
+extern int l1sram_free(const void*);
+extern void *l1sram_alloc_max(void*);
+
+static inline void enter_lazy_tlb(struct mm_struct *mm, struct task_struct *tsk)
+{
+}
+
+/* Called when creating a new context during fork() or execve().  */
+static inline int
+init_new_context(struct task_struct *tsk, struct mm_struct *mm)
+{
+#ifdef CONFIG_MPU
+	unsigned long p = __get_free_pages(GFP_KERNEL, page_mask_order);
+	mm->context.page_rwx_mask = (unsigned long *)p;
+	memset(mm->context.page_rwx_mask, 0,
+	       page_mask_nelts * 3 * sizeof(long));
+#endif
+	return 0;
+}
+
+static inline void free_l1stack(void)
+{
+	nr_l1stack_tasks--;
+	if (nr_l1stack_tasks == 0)
+		l1sram_free(l1_stack_base);
+}
+static inline void destroy_context(struct mm_struct *mm)
+{
+	struct sram_list_struct *tmp;
+
+	if (current_l1_stack_save == mm->context.l1_stack_save)
+		current_l1_stack_save = NULL;
+	if (mm->context.l1_stack_save)
+		free_l1stack();
+
+	while ((tmp = mm->context.sram_list)) {
+		mm->context.sram_list = tmp->next;
+		sram_free(tmp->addr);
+		kfree(tmp);
+	}
+#ifdef CONFIG_MPU
+	if (current_rwx_mask == mm->context.page_rwx_mask)
+		current_rwx_mask = NULL;
+	free_pages((unsigned long)mm->context.page_rwx_mask, page_mask_order);
+#endif
+}
+
+static inline unsigned long
+alloc_l1stack(unsigned long length, unsigned long *stack_base)
+{
+	if (nr_l1stack_tasks == 0) {
+		l1_stack_base = l1sram_alloc_max(&l1_stack_len);
+		if (!l1_stack_base)
+			return 0;
+	}
+
+	if (l1_stack_len < length) {
+		if (nr_l1stack_tasks == 0)
+			l1sram_free(l1_stack_base);
+		return 0;
+	}
+	*stack_base = (unsigned long)l1_stack_base;
+	nr_l1stack_tasks++;
+	return l1_stack_len;
+}
+
+static inline int
+activate_l1stack(struct mm_struct *mm, unsigned long sp_base)
+{
+	if (current_l1_stack_save)
+		memcpy(current_l1_stack_save, l1_stack_base, l1_stack_len);
+	mm->context.l1_stack_save = current_l1_stack_save = (void*)sp_base;
+	memcpy(l1_stack_base, current_l1_stack_save, l1_stack_len);
+	return 1;
+}
+
+#define deactivate_mm(tsk,mm)	do { } while (0)
+
+#define activate_mm(prev, next) switch_mm(prev, next, NULL)
+
+static inline void switch_mm(struct mm_struct *prev_mm, struct mm_struct *next_mm,
+			     struct task_struct *tsk)
+{
+	if (prev_mm == next_mm)
+		return;
+#ifdef CONFIG_MPU
+	if (prev_mm->context.page_rwx_mask == current_rwx_mask) {
+		flush_switched_cplbs();
+		set_mask_dcplbs(next_mm->context.page_rwx_mask);
+	}
+#endif
+
+	/* L1 stack switching.  */
+	if (!next_mm->context.l1_stack_save)
+		return;
+	if (next_mm->context.l1_stack_save == current_l1_stack_save)
+		return;
+	if (current_l1_stack_save) {
+		memcpy(current_l1_stack_save, l1_stack_base, l1_stack_len);
+	}
+	current_l1_stack_save = next_mm->context.l1_stack_save;
+	memcpy(l1_stack_base, current_l1_stack_save, l1_stack_len);
+}
+
+#ifdef CONFIG_MPU
+static inline void protect_page(struct mm_struct *mm, unsigned long addr,
+				unsigned long flags)
+{
+	unsigned long *mask = mm->context.page_rwx_mask;
+	unsigned long page = addr >> 12;
+	unsigned long idx = page >> 5;
+	unsigned long bit = 1 << (page & 31);
+
+	if (flags & VM_MAYREAD)
+		mask[idx] |= bit;
+	else
+		mask[idx] &= ~bit;
+	mask += page_mask_nelts;
+	if (flags & VM_MAYWRITE)
+		mask[idx] |= bit;
+	else
+		mask[idx] &= ~bit;
+	mask += page_mask_nelts;
+	if (flags & VM_MAYEXEC)
+		mask[idx] |= bit;
+	else
+		mask[idx] &= ~bit;
+}
+
+static inline void update_protections(struct mm_struct *mm)
+{
+	if (mm->context.page_rwx_mask == current_rwx_mask) {
+		flush_switched_cplbs();
+		set_mask_dcplbs(mm->context.page_rwx_mask);
+	}
+}
+#endif
+
+#endif
diff --git a/arch/blackfin/include/asm/module.h b/arch/blackfin/include/asm/module.h
new file mode 100644
index 000000000000..e3128df139d6
--- /dev/null
+++ b/arch/blackfin/include/asm/module.h
@@ -0,0 +1,20 @@
+#ifndef _ASM_BFIN_MODULE_H
+#define _ASM_BFIN_MODULE_H
+
+#define MODULE_SYMBOL_PREFIX "_"
+
+#define Elf_Shdr        Elf32_Shdr
+#define Elf_Sym         Elf32_Sym
+#define Elf_Ehdr        Elf32_Ehdr
+
+struct mod_arch_specific {
+	Elf_Shdr	*text_l1;
+	Elf_Shdr	*data_a_l1;
+	Elf_Shdr	*bss_a_l1;
+	Elf_Shdr	*data_b_l1;
+	Elf_Shdr	*bss_b_l1;
+	Elf_Shdr	*text_l2;
+	Elf_Shdr	*data_l2;
+	Elf_Shdr	*bss_l2;
+};
+#endif				/* _ASM_BFIN_MODULE_H */
diff --git a/include/asm-blackfin/msgbuf.h b/arch/blackfin/include/asm/msgbuf.h
index 6fcbe8cd801d..6fcbe8cd801d 100644
--- a/include/asm-blackfin/msgbuf.h
+++ b/arch/blackfin/include/asm/msgbuf.h
diff --git a/include/asm-blackfin/mutex.h b/arch/blackfin/include/asm/mutex.h
index 458c1f7fbc18..458c1f7fbc18 100644
--- a/include/asm-blackfin/mutex.h
+++ b/arch/blackfin/include/asm/mutex.h
diff --git a/include/asm-blackfin/nand.h b/arch/blackfin/include/asm/nand.h
index afbaafa793f1..afbaafa793f1 100644
--- a/include/asm-blackfin/nand.h
+++ b/arch/blackfin/include/asm/nand.h
diff --git a/include/asm-blackfin/page.h b/arch/blackfin/include/asm/page.h
index 344f6a8c1f22..344f6a8c1f22 100644
--- a/include/asm-blackfin/page.h
+++ b/arch/blackfin/include/asm/page.h
diff --git a/include/asm-blackfin/page_offset.h b/arch/blackfin/include/asm/page_offset.h
index cbaff24b4b25..cbaff24b4b25 100644
--- a/include/asm-blackfin/page_offset.h
+++ b/arch/blackfin/include/asm/page_offset.h
diff --git a/include/asm-blackfin/param.h b/arch/blackfin/include/asm/param.h
index 41564a6347f8..41564a6347f8 100644
--- a/include/asm-blackfin/param.h
+++ b/arch/blackfin/include/asm/param.h
diff --git a/include/asm-blackfin/pci.h b/arch/blackfin/include/asm/pci.h
index 61277358c865..61277358c865 100644
--- a/include/asm-blackfin/pci.h
+++ b/arch/blackfin/include/asm/pci.h
diff --git a/include/asm-blackfin/percpu.h b/arch/blackfin/include/asm/percpu.h
index 78dd61f6b39f..78dd61f6b39f 100644
--- a/include/asm-blackfin/percpu.h
+++ b/arch/blackfin/include/asm/percpu.h
diff --git a/include/asm-blackfin/pgalloc.h b/arch/blackfin/include/asm/pgalloc.h
index c686e0542fd0..c686e0542fd0 100644
--- a/include/asm-blackfin/pgalloc.h
+++ b/arch/blackfin/include/asm/pgalloc.h
diff --git a/arch/blackfin/include/asm/pgtable.h b/arch/blackfin/include/asm/pgtable.h
new file mode 100644
index 000000000000..f11684e4ade7
--- /dev/null
+++ b/arch/blackfin/include/asm/pgtable.h
@@ -0,0 +1,96 @@
+#ifndef _BLACKFIN_PGTABLE_H
+#define _BLACKFIN_PGTABLE_H
+
+#include <asm-generic/4level-fixup.h>
+
+#include <asm/page.h>
+#include <asm/def_LPBlackfin.h>
+
+typedef pte_t *pte_addr_t;
+/*
+* Trivial page table functions.
+*/
+#define pgd_present(pgd)	(1)
+#define pgd_none(pgd)		(0)
+#define pgd_bad(pgd)		(0)
+#define pgd_clear(pgdp)
+#define kern_addr_valid(addr)	(1)
+
+#define pmd_offset(a, b)	((void *)0)
+#define pmd_none(x)		(!pmd_val(x))
+#define pmd_present(x)		(pmd_val(x))
+#define pmd_clear(xp)		do { set_pmd(xp, __pmd(0)); } while (0)
+#define pmd_bad(x)		(pmd_val(x) & ~PAGE_MASK)
+
+#define kern_addr_valid(addr) (1)
+
+#define PAGE_NONE		__pgprot(0)	/* these mean nothing to NO_MM */
+#define PAGE_SHARED		__pgprot(0)	/* these mean nothing to NO_MM */
+#define PAGE_COPY		__pgprot(0)	/* these mean nothing to NO_MM */
+#define PAGE_READONLY		__pgprot(0)	/* these mean nothing to NO_MM */
+#define PAGE_KERNEL		__pgprot(0)	/* these mean nothing to NO_MM */
+
+extern void paging_init(void);
+
+#define __swp_type(x)		(0)
+#define __swp_offset(x)		(0)
+#define __swp_entry(typ,off)	((swp_entry_t) { ((typ) | ((off) << 7)) })
+#define __pte_to_swp_entry(pte)	((swp_entry_t) { pte_val(pte) })
+#define __swp_entry_to_pte(x)	((pte_t) { (x).val })
+
+static inline int pte_file(pte_t pte)
+{
+	return 0;
+}
+
+#define set_pte(pteptr, pteval) (*(pteptr) = pteval)
+#define set_pte_at(mm, addr, ptep, pteval) set_pte(ptep, pteval)
+
+/*
+ * Page assess control based on Blackfin CPLB management
+ */
+#define _PAGE_RD	(CPLB_USER_RD)
+#define _PAGE_WR	(CPLB_USER_WR)
+#define _PAGE_USER	(CPLB_USER_RD | CPLB_USER_WR)
+#define _PAGE_ACCESSED	CPLB_ALL_ACCESS
+#define _PAGE_DIRTY	(CPLB_DIRTY)
+
+#define PTE_BIT_FUNC(fn, op) \
+	static inline pte_t pte_##fn(pte_t _pte) { _pte.pte op; return _pte; }
+
+PTE_BIT_FUNC(rdprotect, &= ~_PAGE_RD);
+PTE_BIT_FUNC(mkread, |= _PAGE_RD);
+PTE_BIT_FUNC(wrprotect, &= ~_PAGE_WR);
+PTE_BIT_FUNC(mkwrite, |= _PAGE_WR);
+PTE_BIT_FUNC(exprotect, &= ~_PAGE_USER);
+PTE_BIT_FUNC(mkexec, |= _PAGE_USER);
+PTE_BIT_FUNC(mkclean, &= ~_PAGE_DIRTY);
+PTE_BIT_FUNC(mkdirty, |= _PAGE_DIRTY);
+PTE_BIT_FUNC(mkold, &= ~_PAGE_ACCESSED);
+PTE_BIT_FUNC(mkyoung, |= _PAGE_ACCESSED);
+
+/*
+ * ZERO_PAGE is a global shared page that is always zero: used
+ * for zero-mapped memory areas etc..
+ */
+#define ZERO_PAGE(vaddr)	(virt_to_page(0))
+
+extern unsigned int kobjsize(const void *objp);
+
+#define swapper_pg_dir ((pgd_t *) 0)
+/*
+ * No page table caches to initialise.
+ */
+#define pgtable_cache_init()	do { } while (0)
+#define io_remap_pfn_range      remap_pfn_range
+
+/*
+ * All 32bit addresses are effectively valid for vmalloc...
+ * Sort of meaningless for non-VM targets.
+ */
+#define	VMALLOC_START	0
+#define	VMALLOC_END	0xffffffff
+
+#include <asm-generic/pgtable.h>
+
+#endif				/* _BLACKFIN_PGTABLE_H */
diff --git a/include/asm-blackfin/poll.h b/arch/blackfin/include/asm/poll.h
index 94cc2636e0e2..94cc2636e0e2 100644
--- a/include/asm-blackfin/poll.h
+++ b/arch/blackfin/include/asm/poll.h
diff --git a/include/asm-blackfin/portmux.h b/arch/blackfin/include/asm/portmux.h
index 0807b286cd9e..88eb5c07cc24 100644
--- a/include/asm-blackfin/portmux.h
+++ b/arch/blackfin/include/asm/portmux.h
@@ -21,7 +21,7 @@ int peripheral_request_list(const unsigned short per[], const char *label);
 void peripheral_free_list(const unsigned short per[]);
 
 #include <asm/gpio.h>
-#include <asm/mach/portmux.h>
+#include <mach/portmux.h>
 
 #ifndef P_SPORT2_TFS
 #define P_SPORT2_TFS P_UNDEF
diff --git a/include/asm-blackfin/posix_types.h b/arch/blackfin/include/asm/posix_types.h
index 23aa1f8c1bd1..23aa1f8c1bd1 100644
--- a/include/asm-blackfin/posix_types.h
+++ b/arch/blackfin/include/asm/posix_types.h
diff --git a/arch/blackfin/include/asm/processor.h b/arch/blackfin/include/asm/processor.h
new file mode 100644
index 000000000000..6f3995b119d8
--- /dev/null
+++ b/arch/blackfin/include/asm/processor.h
@@ -0,0 +1,158 @@
+#ifndef __ASM_BFIN_PROCESSOR_H
+#define __ASM_BFIN_PROCESSOR_H
+
+/*
+ * Default implementation of macro that returns current
+ * instruction pointer ("program counter").
+ */
+#define current_text_addr() ({ __label__ _l; _l: &&_l;})
+
+#include <asm/blackfin.h>
+#include <asm/segment.h>
+#include <linux/compiler.h>
+
+static inline unsigned long rdusp(void)
+{
+	unsigned long usp;
+
+	__asm__ __volatile__("%0 = usp;\n\t":"=da"(usp));
+	return usp;
+}
+
+static inline void wrusp(unsigned long usp)
+{
+	__asm__ __volatile__("usp = %0;\n\t"::"da"(usp));
+}
+
+/*
+ * User space process size: 1st byte beyond user address space.
+ * Fairly meaningless on nommu.  Parts of user programs can be scattered
+ * in a lot of places, so just disable this by setting it to 0xFFFFFFFF.
+ */
+#define TASK_SIZE	0xFFFFFFFF
+
+#ifdef __KERNEL__
+#define STACK_TOP	TASK_SIZE
+#endif
+
+#define TASK_UNMAPPED_BASE	0
+
+struct thread_struct {
+	unsigned long ksp;	/* kernel stack pointer */
+	unsigned long usp;	/* user stack pointer */
+	unsigned short seqstat;	/* saved status register */
+	unsigned long esp0;	/* points to SR of stack frame pt_regs */
+	unsigned long pc;	/* instruction pointer */
+	void *        debuggerinfo;
+};
+
+#define INIT_THREAD  {						\
+	sizeof(init_stack) + (unsigned long) init_stack, 0,	\
+	PS_S, 0, 0						\
+}
+
+/*
+ * Do necessary setup to start up a newly executed thread.
+ *
+ * pass the data segment into user programs if it exists,
+ * it can't hurt anything as far as I can tell
+ */
+#define start_thread(_regs, _pc, _usp)					\
+do {									\
+	set_fs(USER_DS);						\
+	(_regs)->pc = (_pc);						\
+	if (current->mm)						\
+		(_regs)->p5 = current->mm->start_data;			\
+	task_thread_info(current)->l1_task_info.stack_start		\
+		= (void *)current->mm->context.stack_start;		\
+	task_thread_info(current)->l1_task_info.lowest_sp = (void *)(_usp); \
+	memcpy(L1_SCRATCH_TASK_INFO, &task_thread_info(current)->l1_task_info, \
+		sizeof(*L1_SCRATCH_TASK_INFO));				\
+	wrusp(_usp);							\
+} while(0)
+
+/* Forward declaration, a strange C thing */
+struct task_struct;
+
+/* Free all resources held by a thread. */
+static inline void release_thread(struct task_struct *dead_task)
+{
+}
+
+#define prepare_to_copy(tsk)	do { } while (0)
+
+extern int kernel_thread(int (*fn) (void *), void *arg, unsigned long flags);
+
+/*
+ * Free current thread data structures etc..
+ */
+static inline void exit_thread(void)
+{
+}
+
+/*
+ * Return saved PC of a blocked thread.
+ */
+#define thread_saved_pc(tsk)	(tsk->thread.pc)
+
+unsigned long get_wchan(struct task_struct *p);
+
+#define	KSTK_EIP(tsk)							\
+    ({									\
+	unsigned long eip = 0;						\
+	if ((tsk)->thread.esp0 > PAGE_SIZE &&				\
+	    MAP_NR((tsk)->thread.esp0) < max_mapnr)			\
+	      eip = ((struct pt_regs *) (tsk)->thread.esp0)->pc;	\
+	eip; })
+#define	KSTK_ESP(tsk)	((tsk) == current ? rdusp() : (tsk)->thread.usp)
+
+#define cpu_relax()    	barrier()
+
+/* Get the Silicon Revision of the chip */
+static inline uint32_t __pure bfin_revid(void)
+{
+	/* stored in the upper 4 bits */
+	uint32_t revid = bfin_read_CHIPID() >> 28;
+
+#ifdef CONFIG_BF52x
+	/* ANOMALY_05000357
+	 * Incorrect Revision Number in DSPID Register
+	 */
+	if (revid == 0)
+		switch (bfin_read16(_BOOTROM_GET_DXE_ADDRESS_TWI)) {
+		case 0x0010:
+			revid = 0;
+			break;
+		case 0x2796:
+			revid = 1;
+			break;
+		default:
+			revid = 0xFFFF;
+			break;
+		}
+#endif
+	return revid;
+}
+
+static inline uint32_t __pure bfin_compiled_revid(void)
+{
+#if defined(CONFIG_BF_REV_0_0)
+	return 0;
+#elif defined(CONFIG_BF_REV_0_1)
+	return 1;
+#elif defined(CONFIG_BF_REV_0_2)
+	return 2;
+#elif defined(CONFIG_BF_REV_0_3)
+	return 3;
+#elif defined(CONFIG_BF_REV_0_4)
+	return 4;
+#elif defined(CONFIG_BF_REV_0_5)
+	return 5;
+#elif defined(CONFIG_BF_REV_ANY)
+	return 0xffff;
+#else
+	return -1;
+#endif
+}
+
+#endif
diff --git a/arch/blackfin/include/asm/ptrace.h b/arch/blackfin/include/asm/ptrace.h
new file mode 100644
index 000000000000..a45a80e54adc
--- /dev/null
+++ b/arch/blackfin/include/asm/ptrace.h
@@ -0,0 +1,168 @@
+#ifndef _BFIN_PTRACE_H
+#define _BFIN_PTRACE_H
+
+/*
+ * GCC defines register number like this:
+ * -----------------------------
+ *       0 - 7 are data registers R0-R7
+ *       8 - 15 are address registers P0-P7
+ *      16 - 31 dsp registers I/B/L0 -- I/B/L3 & M0--M3
+ *      32 - 33 A registers A0 & A1
+ *      34 -    status register
+ * -----------------------------
+ *
+ * We follows above, except:
+ *      32-33 --- Low 32-bit of A0&1
+ *      34-35 --- High 8-bit of A0&1
+ */
+
+#ifndef __ASSEMBLY__
+
+/* this struct defines the way the registers are stored on the
+   stack during a system call. */
+
+struct pt_regs {
+	long orig_pc;
+	long ipend;
+	long seqstat;
+	long rete;
+	long retn;
+	long retx;
+	long pc;		/* PC == RETI */
+	long rets;
+	long reserved;		/* Used as scratch during system calls */
+	long astat;
+	long lb1;
+	long lb0;
+	long lt1;
+	long lt0;
+	long lc1;
+	long lc0;
+	long a1w;
+	long a1x;
+	long a0w;
+	long a0x;
+	long b3;
+	long b2;
+	long b1;
+	long b0;
+	long l3;
+	long l2;
+	long l1;
+	long l0;
+	long m3;
+	long m2;
+	long m1;
+	long m0;
+	long i3;
+	long i2;
+	long i1;
+	long i0;
+	long usp;
+	long fp;
+	long p5;
+	long p4;
+	long p3;
+	long p2;
+	long p1;
+	long p0;
+	long r7;
+	long r6;
+	long r5;
+	long r4;
+	long r3;
+	long r2;
+	long r1;
+	long r0;
+	long orig_r0;
+	long orig_p0;
+	long syscfg;
+};
+
+/* Arbitrarily choose the same ptrace numbers as used by the Sparc code. */
+#define PTRACE_GETREGS            12
+#define PTRACE_SETREGS            13	/* ptrace signal  */
+
+#define PTRACE_GETFDPIC           31
+#define PTRACE_GETFDPIC_EXEC      0
+#define PTRACE_GETFDPIC_INTERP    1
+
+#define PS_S  (0x0002)
+
+#ifdef __KERNEL__
+
+/* user_mode returns true if only one bit is set in IPEND, other than the
+   master interrupt enable.  */
+#define user_mode(regs) (!(((regs)->ipend & ~0x10) & (((regs)->ipend & ~0x10) - 1)))
+#define instruction_pointer(regs) ((regs)->pc)
+#define profile_pc(regs) instruction_pointer(regs)
+extern void show_regs(struct pt_regs *);
+
+#endif  /*  __KERNEL__  */
+
+#endif				/* __ASSEMBLY__ */
+
+/*
+ * Offsets used by 'ptrace' system call interface.
+ */
+
+#define PT_R0 204
+#define PT_R1 200
+#define PT_R2 196
+#define PT_R3 192
+#define PT_R4 188
+#define PT_R5 184
+#define PT_R6 180
+#define PT_R7 176
+#define PT_P0 172
+#define PT_P1 168
+#define PT_P2 164
+#define PT_P3 160
+#define PT_P4 156
+#define PT_P5 152
+#define PT_FP 148
+#define PT_USP 144
+#define PT_I0 140
+#define PT_I1 136
+#define PT_I2 132
+#define PT_I3 128
+#define PT_M0 124
+#define PT_M1 120
+#define PT_M2 116
+#define PT_M3 112
+#define PT_L0 108
+#define PT_L1 104
+#define PT_L2 100
+#define PT_L3 96
+#define PT_B0 92
+#define PT_B1 88
+#define PT_B2 84
+#define PT_B3 80
+#define PT_A0X 76
+#define PT_A0W 72
+#define PT_A1X 68
+#define PT_A1W 64
+#define PT_LC0 60
+#define PT_LC1 56
+#define PT_LT0 52
+#define PT_LT1 48
+#define PT_LB0 44
+#define PT_LB1 40
+#define PT_ASTAT 36
+#define PT_RESERVED 32
+#define PT_RETS 28
+#define PT_PC 24
+#define PT_RETX 20
+#define PT_RETN 16
+#define PT_RETE 12
+#define PT_SEQSTAT 8
+#define PT_IPEND 4
+
+#define PT_SYSCFG 216
+#define PT_TEXT_ADDR 220
+#define PT_TEXT_END_ADDR 224
+#define PT_DATA_ADDR 228
+#define PT_FDPIC_EXEC 232
+#define PT_FDPIC_INTERP 236
+
+#endif				/* _BFIN_PTRACE_H */
diff --git a/include/asm-blackfin/reboot.h b/arch/blackfin/include/asm/reboot.h
index 6d448b5f5985..6d448b5f5985 100644
--- a/include/asm-blackfin/reboot.h
+++ b/arch/blackfin/include/asm/reboot.h
diff --git a/include/asm-blackfin/resource.h b/arch/blackfin/include/asm/resource.h
index 091355ab3495..091355ab3495 100644
--- a/include/asm-blackfin/resource.h
+++ b/arch/blackfin/include/asm/resource.h
diff --git a/include/asm-blackfin/scatterlist.h b/arch/blackfin/include/asm/scatterlist.h
index 04f448711cd0..04f448711cd0 100644
--- a/include/asm-blackfin/scatterlist.h
+++ b/arch/blackfin/include/asm/scatterlist.h
diff --git a/include/asm-blackfin/sections.h b/arch/blackfin/include/asm/sections.h
index 1443c3353a8c..1443c3353a8c 100644
--- a/include/asm-blackfin/sections.h
+++ b/arch/blackfin/include/asm/sections.h
diff --git a/include/asm-blackfin/segment.h b/arch/blackfin/include/asm/segment.h
index 02cfd09b5a99..02cfd09b5a99 100644
--- a/include/asm-blackfin/segment.h
+++ b/arch/blackfin/include/asm/segment.h
diff --git a/include/asm-blackfin/sembuf.h b/arch/blackfin/include/asm/sembuf.h
index 18deb5c7fa5d..18deb5c7fa5d 100644
--- a/include/asm-blackfin/sembuf.h
+++ b/arch/blackfin/include/asm/sembuf.h
diff --git a/include/asm-blackfin/serial.h b/arch/blackfin/include/asm/serial.h
index 994dd869558c..994dd869558c 100644
--- a/include/asm-blackfin/serial.h
+++ b/arch/blackfin/include/asm/serial.h
diff --git a/include/asm-blackfin/setup.h b/arch/blackfin/include/asm/setup.h
index 01c8c6cbe6fc..01c8c6cbe6fc 100644
--- a/include/asm-blackfin/setup.h
+++ b/arch/blackfin/include/asm/setup.h
diff --git a/include/asm-blackfin/shmbuf.h b/arch/blackfin/include/asm/shmbuf.h
index 612436303e89..612436303e89 100644
--- a/include/asm-blackfin/shmbuf.h
+++ b/arch/blackfin/include/asm/shmbuf.h
diff --git a/include/asm-blackfin/shmparam.h b/arch/blackfin/include/asm/shmparam.h
index 3c03906b7664..3c03906b7664 100644
--- a/include/asm-blackfin/shmparam.h
+++ b/arch/blackfin/include/asm/shmparam.h
diff --git a/include/asm-blackfin/sigcontext.h b/arch/blackfin/include/asm/sigcontext.h
index ce00b03c2775..ce00b03c2775 100644
--- a/include/asm-blackfin/sigcontext.h
+++ b/arch/blackfin/include/asm/sigcontext.h
diff --git a/include/asm-blackfin/siginfo.h b/arch/blackfin/include/asm/siginfo.h
index eca4565cea37..eca4565cea37 100644
--- a/include/asm-blackfin/siginfo.h
+++ b/arch/blackfin/include/asm/siginfo.h
diff --git a/include/asm-blackfin/signal.h b/arch/blackfin/include/asm/signal.h
index 87951d251458..87951d251458 100644
--- a/include/asm-blackfin/signal.h
+++ b/arch/blackfin/include/asm/signal.h
diff --git a/include/asm-blackfin/socket.h b/arch/blackfin/include/asm/socket.h
index 2ca702e44d47..2ca702e44d47 100644
--- a/include/asm-blackfin/socket.h
+++ b/arch/blackfin/include/asm/socket.h
diff --git a/include/asm-blackfin/sockios.h b/arch/blackfin/include/asm/sockios.h
index 426b89bfaa8b..426b89bfaa8b 100644
--- a/include/asm-blackfin/sockios.h
+++ b/arch/blackfin/include/asm/sockios.h
diff --git a/include/asm-blackfin/spinlock.h b/arch/blackfin/include/asm/spinlock.h
index 64e908a50646..64e908a50646 100644
--- a/include/asm-blackfin/spinlock.h
+++ b/arch/blackfin/include/asm/spinlock.h
diff --git a/include/asm-blackfin/stat.h b/arch/blackfin/include/asm/stat.h
index d2b6f11ec231..d2b6f11ec231 100644
--- a/include/asm-blackfin/stat.h
+++ b/arch/blackfin/include/asm/stat.h
diff --git a/include/asm-blackfin/statfs.h b/arch/blackfin/include/asm/statfs.h
index 350672091ba3..350672091ba3 100644
--- a/include/asm-blackfin/statfs.h
+++ b/arch/blackfin/include/asm/statfs.h
diff --git a/include/asm-blackfin/string.h b/arch/blackfin/include/asm/string.h
index 321f4d96e4ae..321f4d96e4ae 100644
--- a/include/asm-blackfin/string.h
+++ b/arch/blackfin/include/asm/string.h
diff --git a/arch/blackfin/include/asm/system.h b/arch/blackfin/include/asm/system.h
new file mode 100644
index 000000000000..8f1627d8bf09
--- /dev/null
+++ b/arch/blackfin/include/asm/system.h
@@ -0,0 +1,221 @@
+/*
+ * File:        include/asm/system.h
+ * Based on:
+ * Author:      Tony Kou (tonyko@lineo.ca)
+ *              Copyright (c) 2002 Arcturus Networks Inc.
+ *                    (www.arcturusnetworks.com)
+ *              Copyright (c) 2003 Metrowerks (www.metrowerks.com)
+ *              Copyright (c) 2004 Analog Device Inc.
+ * Created:     25Jan2001 - Tony Kou
+ * Description: system.h include file
+ *
+ * Modified:     22Sep2006 - Robin Getz
+ *                - move include blackfin.h down, so I can get access to
+ *                   irq functions in other include files.
+ *
+ * Bugs:         Enter bugs at http://blackfin.uclinux.org/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; see the file COPYING.
+ * If not, write to the Free Software Foundation,
+ * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ */
+
+#ifndef _BLACKFIN_SYSTEM_H
+#define _BLACKFIN_SYSTEM_H
+
+#include <linux/linkage.h>
+#include <linux/compiler.h>
+#include <mach/anomaly.h>
+
+/*
+ * Interrupt configuring macros.
+ */
+
+extern unsigned long irq_flags;
+
+#define local_irq_enable() \
+	__asm__ __volatile__( \
+		"sti %0;" \
+		: \
+		: "d" (irq_flags) \
+	)
+
+#define local_irq_disable() \
+	do { \
+		int __tmp_dummy; \
+		__asm__ __volatile__( \
+			"cli %0;" \
+			: "=d" (__tmp_dummy) \
+		); \
+	} while (0)
+
+#if ANOMALY_05000244 && defined(CONFIG_BFIN_ICACHE)
+# define NOP_PAD_ANOMALY_05000244 "nop; nop;"
+#else
+# define NOP_PAD_ANOMALY_05000244
+#endif
+
+#define idle_with_irq_disabled() \
+	__asm__ __volatile__( \
+		NOP_PAD_ANOMALY_05000244 \
+		".align 8;" \
+		"sti %0;" \
+		"idle;" \
+		: \
+		: "d" (irq_flags) \
+	)
+
+#ifdef CONFIG_DEBUG_HWERR
+# define __save_and_cli(x) \
+	__asm__ __volatile__( \
+		"cli %0;" \
+		"sti %1;" \
+		: "=&d" (x) \
+		: "d" (0x3F) \
+	)
+#else
+# define __save_and_cli(x) \
+	__asm__ __volatile__( \
+		"cli %0;" \
+		: "=&d" (x) \
+	)
+#endif
+
+#define local_save_flags(x) \
+	__asm__ __volatile__( \
+		"cli %0;" \
+		"sti %0;" \
+		: "=d" (x) \
+	)
+
+#ifdef CONFIG_DEBUG_HWERR
+#define irqs_enabled_from_flags(x) (((x) & ~0x3f) != 0)
+#else
+#define irqs_enabled_from_flags(x) ((x) != 0x1f)
+#endif
+
+#define local_irq_restore(x) \
+	do { \
+		if (irqs_enabled_from_flags(x)) \
+			local_irq_enable(); \
+	} while (0)
+
+/* For spinlocks etc */
+#define local_irq_save(x) __save_and_cli(x)
+
+#define	irqs_disabled()				\
+({						\
+	unsigned long flags;			\
+	local_save_flags(flags);		\
+	!irqs_enabled_from_flags(flags);	\
+})
+
+/*
+ * Force strict CPU ordering.
+ */
+#define nop()  asm volatile ("nop;\n\t"::)
+#define mb()   asm volatile (""   : : :"memory")
+#define rmb()  asm volatile (""   : : :"memory")
+#define wmb()  asm volatile (""   : : :"memory")
+#define set_mb(var, value) do { (void) xchg(&var, value); } while (0)
+
+#define read_barrier_depends() 		do { } while(0)
+
+#ifdef CONFIG_SMP
+#define smp_mb()	mb()
+#define smp_rmb()	rmb()
+#define smp_wmb()	wmb()
+#define smp_read_barrier_depends()	read_barrier_depends()
+#else
+#define smp_mb()	barrier()
+#define smp_rmb()	barrier()
+#define smp_wmb()	barrier()
+#define smp_read_barrier_depends()	do { } while(0)
+#endif
+
+#define xchg(ptr,x) ((__typeof__(*(ptr)))__xchg((unsigned long)(x),(ptr),sizeof(*(ptr))))
+
+struct __xchg_dummy {
+	unsigned long a[100];
+};
+#define __xg(x) ((volatile struct __xchg_dummy *)(x))
+
+static inline unsigned long __xchg(unsigned long x, volatile void *ptr,
+				   int size)
+{
+	unsigned long tmp = 0;
+	unsigned long flags = 0;
+
+	local_irq_save(flags);
+
+	switch (size) {
+	case 1:
+		__asm__ __volatile__
+			("%0 = b%2 (z);\n\t"
+			 "b%2 = %1;\n\t"
+			 : "=&d" (tmp) : "d" (x), "m" (*__xg(ptr)) : "memory");
+		break;
+	case 2:
+		__asm__ __volatile__
+			("%0 = w%2 (z);\n\t"
+			 "w%2 = %1;\n\t"
+			 : "=&d" (tmp) : "d" (x), "m" (*__xg(ptr)) : "memory");
+		break;
+	case 4:
+		__asm__ __volatile__
+			("%0 = %2;\n\t"
+			 "%2 = %1;\n\t"
+			 : "=&d" (tmp) : "d" (x), "m" (*__xg(ptr)) : "memory");
+		break;
+	}
+	local_irq_restore(flags);
+	return tmp;
+}
+
+#include <asm-generic/cmpxchg-local.h>
+
+/*
+ * cmpxchg_local and cmpxchg64_local are atomic wrt current CPU. Always make
+ * them available.
+ */
+#define cmpxchg_local(ptr, o, n)				  	       \
+	((__typeof__(*(ptr)))__cmpxchg_local_generic((ptr), (unsigned long)(o),\
+			(unsigned long)(n), sizeof(*(ptr))))
+#define cmpxchg64_local(ptr, o, n) __cmpxchg64_local_generic((ptr), (o), (n))
+
+#ifndef CONFIG_SMP
+#include <asm-generic/cmpxchg.h>
+#endif
+
+#define prepare_to_switch()     do { } while(0)
+
+/*
+ * switch_to(n) should switch tasks to task ptr, first checking that
+ * ptr isn't the current task, in which case it does nothing.
+ */
+
+#include <asm/blackfin.h>
+
+asmlinkage struct task_struct *resume(struct task_struct *prev, struct task_struct *next);
+
+#define switch_to(prev,next,last) \
+do {    \
+	memcpy (&task_thread_info(prev)->l1_task_info, L1_SCRATCH_TASK_INFO, \
+		sizeof *L1_SCRATCH_TASK_INFO); \
+	memcpy (L1_SCRATCH_TASK_INFO, &task_thread_info(next)->l1_task_info, \
+		sizeof *L1_SCRATCH_TASK_INFO); \
+	(last) = resume (prev, next);   \
+} while (0)
+
+#endif				/* _BLACKFIN_SYSTEM_H */
diff --git a/include/asm-blackfin/termbits.h b/arch/blackfin/include/asm/termbits.h
index f37feb7cf895..f37feb7cf895 100644
--- a/include/asm-blackfin/termbits.h
+++ b/arch/blackfin/include/asm/termbits.h
diff --git a/include/asm-blackfin/termios.h b/arch/blackfin/include/asm/termios.h
index d50d063c605a..d50d063c605a 100644
--- a/include/asm-blackfin/termios.h
+++ b/arch/blackfin/include/asm/termios.h
diff --git a/arch/blackfin/include/asm/thread_info.h b/arch/blackfin/include/asm/thread_info.h
new file mode 100644
index 000000000000..642769329d12
--- /dev/null
+++ b/arch/blackfin/include/asm/thread_info.h
@@ -0,0 +1,135 @@
+/*
+ * File:         include/asm-blackfin/thread_info.h
+ * Based on:     include/asm-m68knommu/thread_info.h
+ * Author:       LG Soft India
+ *               Copyright (C) 2004-2005 Analog Devices Inc.
+ * Created:      Tue Sep 21 2004
+ * Description:  Blackfin low-level thread information
+ * Modified:
+ * Bugs:         Enter bugs at http://blackfin.uclinux.org/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; see the file COPYING.
+ * If not, write to the Free Software Foundation,
+ * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ */
+
+#ifndef _ASM_THREAD_INFO_H
+#define _ASM_THREAD_INFO_H
+
+#include <asm/page.h>
+#include <asm/entry.h>
+#include <asm/l1layout.h>
+#include <linux/compiler.h>
+
+#ifdef __KERNEL__
+
+/* Thread Align Mask to reach to the top of the stack
+ * for any process
+ */
+#define ALIGN_PAGE_MASK         0xffffe000
+
+/*
+ * Size of kernel stack for each process. This must be a power of 2...
+ */
+#define THREAD_SIZE_ORDER	1
+#define THREAD_SIZE		8192	/* 2 pages */
+
+#ifndef __ASSEMBLY__
+
+typedef unsigned long mm_segment_t;
+
+/*
+ * low level task data.
+ * If you change this, change the TI_* offsets below to match.
+ */
+
+struct thread_info {
+	struct task_struct *task;	/* main task structure */
+	struct exec_domain *exec_domain;	/* execution domain */
+	unsigned long flags;	/* low level flags */
+	int cpu;		/* cpu we're on */
+	int preempt_count;	/* 0 => preemptable, <0 => BUG */
+	mm_segment_t addr_limit;	/* address limit */
+	struct restart_block restart_block;
+	struct l1_scratch_task_info l1_task_info;
+};
+
+/*
+ * macros/functions for gaining access to the thread information structure
+ */
+#define INIT_THREAD_INFO(tsk)			\
+{						\
+	.task		= &tsk,			\
+	.exec_domain	= &default_exec_domain,	\
+	.flags		= 0,			\
+	.cpu		= 0,			\
+	.preempt_count  = 1,                    \
+	.restart_block	= {			\
+		.fn = do_no_restart_syscall,	\
+	},					\
+}
+#define init_thread_info	(init_thread_union.thread_info)
+#define init_stack		(init_thread_union.stack)
+
+/* Given a task stack pointer, you can find its corresponding
+ * thread_info structure just by masking it to the THREAD_SIZE
+ * boundary (currently 8K as you can see above).
+ */
+__attribute_const__
+static inline struct thread_info *current_thread_info(void)
+{
+	struct thread_info *ti;
+      __asm__("%0 = sp;": "=&d"(ti):
+	);
+	return (struct thread_info *)((long)ti & ~((long)THREAD_SIZE-1));
+}
+
+#endif				/* __ASSEMBLY__ */
+
+/*
+ * Offsets in thread_info structure, used in assembly code
+ */
+#define TI_TASK		0
+#define TI_EXECDOMAIN	4
+#define TI_FLAGS	8
+#define TI_CPU		12
+#define TI_PREEMPT	16
+
+#define	PREEMPT_ACTIVE	0x4000000
+
+/*
+ * thread information flag bit numbers
+ */
+#define TIF_SYSCALL_TRACE	0	/* syscall trace active */
+#define TIF_SIGPENDING		1	/* signal pending */
+#define TIF_NEED_RESCHED	2	/* rescheduling necessary */
+#define TIF_POLLING_NRFLAG	3	/* true if poll_idle() is polling
+					   TIF_NEED_RESCHED */
+#define TIF_MEMDIE              4
+#define TIF_RESTORE_SIGMASK	5	/* restore signal mask in do_signal() */
+#define TIF_FREEZE              6       /* is freezing for suspend */
+
+/* as above, but as bit values */
+#define _TIF_SYSCALL_TRACE	(1<<TIF_SYSCALL_TRACE)
+#define _TIF_SIGPENDING		(1<<TIF_SIGPENDING)
+#define _TIF_NEED_RESCHED	(1<<TIF_NEED_RESCHED)
+#define _TIF_POLLING_NRFLAG	(1<<TIF_POLLING_NRFLAG)
+#define _TIF_RESTORE_SIGMASK	(1<<TIF_RESTORE_SIGMASK)
+#define _TIF_FREEZE             (1<<TIF_FREEZE)
+
+#define _TIF_WORK_MASK		0x0000FFFE	/* work to do on interrupt/exception return */
+
+#endif				/* __KERNEL__ */
+
+#endif				/* _ASM_THREAD_INFO_H */
diff --git a/include/asm-blackfin/time.h b/arch/blackfin/include/asm/time.h
index ddc43ce38533..ddc43ce38533 100644
--- a/include/asm-blackfin/time.h
+++ b/arch/blackfin/include/asm/time.h
diff --git a/include/asm-blackfin/timex.h b/arch/blackfin/include/asm/timex.h
index 22b0806161bb..22b0806161bb 100644
--- a/include/asm-blackfin/timex.h
+++ b/arch/blackfin/include/asm/timex.h
diff --git a/include/asm-blackfin/tlb.h b/arch/blackfin/include/asm/tlb.h
index 89a12ee916d8..89a12ee916d8 100644
--- a/include/asm-blackfin/tlb.h
+++ b/arch/blackfin/include/asm/tlb.h
diff --git a/include/asm-blackfin/tlbflush.h b/arch/blackfin/include/asm/tlbflush.h
index 277b400924b8..277b400924b8 100644
--- a/include/asm-blackfin/tlbflush.h
+++ b/arch/blackfin/include/asm/tlbflush.h
diff --git a/include/asm-blackfin/topology.h b/arch/blackfin/include/asm/topology.h
index acee23987897..acee23987897 100644
--- a/include/asm-blackfin/topology.h
+++ b/arch/blackfin/include/asm/topology.h
diff --git a/include/asm-blackfin/trace.h b/arch/blackfin/include/asm/trace.h
index 312b596b9731..312b596b9731 100644
--- a/include/asm-blackfin/trace.h
+++ b/arch/blackfin/include/asm/trace.h
diff --git a/include/asm-blackfin/traps.h b/arch/blackfin/include/asm/traps.h
index f0e5f940d9ca..f0e5f940d9ca 100644
--- a/include/asm-blackfin/traps.h
+++ b/arch/blackfin/include/asm/traps.h
diff --git a/include/asm-blackfin/types.h b/arch/blackfin/include/asm/types.h
index 8441cbc2bf9e..8441cbc2bf9e 100644
--- a/include/asm-blackfin/types.h
+++ b/arch/blackfin/include/asm/types.h
diff --git a/include/asm-blackfin/uaccess.h b/arch/blackfin/include/asm/uaccess.h
index d928b8099056..d928b8099056 100644
--- a/include/asm-blackfin/uaccess.h
+++ b/arch/blackfin/include/asm/uaccess.h
diff --git a/include/asm-blackfin/ucontext.h b/arch/blackfin/include/asm/ucontext.h
index 4a4e3856beba..4a4e3856beba 100644
--- a/include/asm-blackfin/ucontext.h
+++ b/arch/blackfin/include/asm/ucontext.h
diff --git a/include/asm-blackfin/unaligned.h b/arch/blackfin/include/asm/unaligned.h
index fd8a1d634945..fd8a1d634945 100644
--- a/include/asm-blackfin/unaligned.h
+++ b/arch/blackfin/include/asm/unaligned.h
diff --git a/arch/blackfin/include/asm/unistd.h b/arch/blackfin/include/asm/unistd.h
new file mode 100644
index 000000000000..1e57b636e0bc
--- /dev/null
+++ b/arch/blackfin/include/asm/unistd.h
@@ -0,0 +1,438 @@
+#ifndef __ASM_BFIN_UNISTD_H
+#define __ASM_BFIN_UNISTD_H
+/*
+ * This file contains the system call numbers.
+ */
+#define __NR_restart_syscall	  0
+#define __NR_exit		  1
+#define __NR_fork		  2
+#define __NR_read		  3
+#define __NR_write		  4
+#define __NR_open		  5
+#define __NR_close		  6
+				/* 7 __NR_waitpid obsolete */
+#define __NR_creat		  8
+#define __NR_link		  9
+#define __NR_unlink		 10
+#define __NR_execve		 11
+#define __NR_chdir		 12
+#define __NR_time		 13
+#define __NR_mknod		 14
+#define __NR_chmod		 15
+#define __NR_chown		 16
+				/* 17 __NR_break obsolete */
+				/* 18 __NR_oldstat obsolete */
+#define __NR_lseek		 19
+#define __NR_getpid		 20
+#define __NR_mount		 21
+				/* 22 __NR_umount obsolete */
+#define __NR_setuid		 23
+#define __NR_getuid		 24
+#define __NR_stime		 25
+#define __NR_ptrace		 26
+#define __NR_alarm		 27
+				/* 28 __NR_oldfstat obsolete */
+#define __NR_pause		 29
+				/* 30 __NR_utime obsolete */
+				/* 31 __NR_stty obsolete */
+				/* 32 __NR_gtty obsolete */
+#define __NR_access		 33
+#define __NR_nice		 34
+				/* 35 __NR_ftime obsolete */
+#define __NR_sync		 36
+#define __NR_kill		 37
+#define __NR_rename		 38
+#define __NR_mkdir		 39
+#define __NR_rmdir		 40
+#define __NR_dup		 41
+#define __NR_pipe		 42
+#define __NR_times		 43
+				/* 44 __NR_prof obsolete */
+#define __NR_brk		 45
+#define __NR_setgid		 46
+#define __NR_getgid		 47
+				/* 48 __NR_signal obsolete */
+#define __NR_geteuid		 49
+#define __NR_getegid		 50
+#define __NR_acct		 51
+#define __NR_umount2		 52
+				/* 53 __NR_lock obsolete */
+#define __NR_ioctl		 54
+#define __NR_fcntl		 55
+				/* 56 __NR_mpx obsolete */
+#define __NR_setpgid		 57
+				/* 58 __NR_ulimit obsolete */
+				/* 59 __NR_oldolduname obsolete */
+#define __NR_umask		 60
+#define __NR_chroot		 61
+#define __NR_ustat		 62
+#define __NR_dup2		 63
+#define __NR_getppid		 64
+#define __NR_getpgrp		 65
+#define __NR_setsid		 66
+				/* 67 __NR_sigaction obsolete */
+#define __NR_sgetmask		 68
+#define __NR_ssetmask		 69
+#define __NR_setreuid		 70
+#define __NR_setregid		 71
+				/* 72 __NR_sigsuspend obsolete */
+				/* 73 __NR_sigpending obsolete */
+#define __NR_sethostname	 74
+#define __NR_setrlimit		 75
+				/* 76 __NR_old_getrlimit obsolete */
+#define __NR_getrusage		 77
+#define __NR_gettimeofday	 78
+#define __NR_settimeofday	 79
+#define __NR_getgroups		 80
+#define __NR_setgroups		 81
+				/* 82 __NR_select obsolete */
+#define __NR_symlink		 83
+				/* 84 __NR_oldlstat obsolete */
+#define __NR_readlink		 85
+				/* 86 __NR_uselib obsolete */
+				/* 87 __NR_swapon obsolete */
+#define __NR_reboot		 88
+				/* 89 __NR_readdir obsolete */
+				/* 90 __NR_mmap obsolete */
+#define __NR_munmap		 91
+#define __NR_truncate		 92
+#define __NR_ftruncate		 93
+#define __NR_fchmod		 94
+#define __NR_fchown		 95
+#define __NR_getpriority	 96
+#define __NR_setpriority	 97
+				/* 98 __NR_profil obsolete */
+#define __NR_statfs		 99
+#define __NR_fstatfs		100
+				/* 101 __NR_ioperm */
+				/* 102 __NR_socketcall obsolete */
+#define __NR_syslog		103
+#define __NR_setitimer		104
+#define __NR_getitimer		105
+#define __NR_stat		106
+#define __NR_lstat		107
+#define __NR_fstat		108
+				/* 109 __NR_olduname obsolete */
+				/* 110 __NR_iopl obsolete */
+#define __NR_vhangup		111
+				/* 112 __NR_idle obsolete */
+				/* 113 __NR_vm86old */
+#define __NR_wait4		114
+				/* 115 __NR_swapoff obsolete */
+#define __NR_sysinfo		116
+				/* 117 __NR_ipc oboslete */
+#define __NR_fsync		118
+				/* 119 __NR_sigreturn obsolete */
+#define __NR_clone		120
+#define __NR_setdomainname	121
+#define __NR_uname		122
+				/* 123 __NR_modify_ldt obsolete */
+#define __NR_adjtimex		124
+#define __NR_mprotect		125
+				/* 126 __NR_sigprocmask obsolete */
+				/* 127 __NR_create_module obsolete */
+#define __NR_init_module	128
+#define __NR_delete_module	129
+				/* 130 __NR_get_kernel_syms obsolete */
+#define __NR_quotactl		131
+#define __NR_getpgid		132
+#define __NR_fchdir		133
+#define __NR_bdflush		134
+				/* 135 was sysfs */
+#define __NR_personality	136
+				/* 137 __NR_afs_syscall */
+#define __NR_setfsuid		138
+#define __NR_setfsgid		139
+#define __NR__llseek		140
+#define __NR_getdents		141
+				/* 142 __NR__newselect obsolete */
+#define __NR_flock		143
+				/* 144 __NR_msync obsolete */
+#define __NR_readv		145
+#define __NR_writev		146
+#define __NR_getsid		147
+#define __NR_fdatasync		148
+#define __NR__sysctl		149
+				/* 150 __NR_mlock */
+				/* 151 __NR_munlock */
+				/* 152 __NR_mlockall */
+				/* 153 __NR_munlockall */
+#define __NR_sched_setparam		154
+#define __NR_sched_getparam		155
+#define __NR_sched_setscheduler		156
+#define __NR_sched_getscheduler		157
+#define __NR_sched_yield		158
+#define __NR_sched_get_priority_max	159
+#define __NR_sched_get_priority_min	160
+#define __NR_sched_rr_get_interval	161
+#define __NR_nanosleep		162
+#define __NR_mremap		163
+#define __NR_setresuid		164
+#define __NR_getresuid		165
+				/* 166 __NR_vm86 */
+				/* 167 __NR_query_module */
+				/* 168 __NR_poll */
+#define __NR_nfsservctl		169
+#define __NR_setresgid		170
+#define __NR_getresgid		171
+#define __NR_prctl		172
+#define __NR_rt_sigreturn	173
+#define __NR_rt_sigaction	174
+#define __NR_rt_sigprocmask	175
+#define __NR_rt_sigpending	176
+#define __NR_rt_sigtimedwait	177
+#define __NR_rt_sigqueueinfo	178
+#define __NR_rt_sigsuspend	179
+#define __NR_pread		180
+#define __NR_pwrite		181
+#define __NR_lchown		182
+#define __NR_getcwd		183
+#define __NR_capget		184
+#define __NR_capset		185
+#define __NR_sigaltstack	186
+#define __NR_sendfile		187
+				/* 188 __NR_getpmsg */
+				/* 189 __NR_putpmsg */
+#define __NR_vfork		190
+#define __NR_getrlimit		191
+#define __NR_mmap2		192
+#define __NR_truncate64		193
+#define __NR_ftruncate64	194
+#define __NR_stat64		195
+#define __NR_lstat64		196
+#define __NR_fstat64		197
+#define __NR_chown32		198
+#define __NR_getuid32		199
+#define __NR_getgid32		200
+#define __NR_geteuid32		201
+#define __NR_getegid32		202
+#define __NR_setreuid32		203
+#define __NR_setregid32		204
+#define __NR_getgroups32	205
+#define __NR_setgroups32	206
+#define __NR_fchown32		207
+#define __NR_setresuid32	208
+#define __NR_getresuid32	209
+#define __NR_setresgid32	210
+#define __NR_getresgid32	211
+#define __NR_lchown32		212
+#define __NR_setuid32		213
+#define __NR_setgid32		214
+#define __NR_setfsuid32		215
+#define __NR_setfsgid32		216
+#define __NR_pivot_root		217
+				/* 218 __NR_mincore */
+				/* 219 __NR_madvise */
+#define __NR_getdents64		220
+#define __NR_fcntl64		221
+				/* 222 reserved for TUX */
+				/* 223 reserved for TUX */
+#define __NR_gettid		224
+#define __NR_readahead		225
+#define __NR_setxattr		226
+#define __NR_lsetxattr		227
+#define __NR_fsetxattr		228
+#define __NR_getxattr		229
+#define __NR_lgetxattr		230
+#define __NR_fgetxattr		231
+#define __NR_listxattr		232
+#define __NR_llistxattr		233
+#define __NR_flistxattr		234
+#define __NR_removexattr	235
+#define __NR_lremovexattr	236
+#define __NR_fremovexattr	237
+#define __NR_tkill		238
+#define __NR_sendfile64		239
+#define __NR_futex		240
+#define __NR_sched_setaffinity	241
+#define __NR_sched_getaffinity	242
+				/* 243 __NR_set_thread_area */
+				/* 244 __NR_get_thread_area */
+#define __NR_io_setup		245
+#define __NR_io_destroy		246
+#define __NR_io_getevents	247
+#define __NR_io_submit		248
+#define __NR_io_cancel		249
+				/* 250 __NR_alloc_hugepages */
+				/* 251 __NR_free_hugepages */
+#define __NR_exit_group		252
+#define __NR_lookup_dcookie     253
+#define __NR_bfin_spinlock      254
+
+#define __NR_epoll_create	255
+#define __NR_epoll_ctl		256
+#define __NR_epoll_wait		257
+				/* 258 __NR_remap_file_pages */
+#define __NR_set_tid_address	259
+#define __NR_timer_create	260
+#define __NR_timer_settime	261
+#define __NR_timer_gettime	262
+#define __NR_timer_getoverrun	263
+#define __NR_timer_delete	264
+#define __NR_clock_settime	265
+#define __NR_clock_gettime	266
+#define __NR_clock_getres	267
+#define __NR_clock_nanosleep	268
+#define __NR_statfs64		269
+#define __NR_fstatfs64		270
+#define __NR_tgkill		271
+#define __NR_utimes		272
+#define __NR_fadvise64_64	273
+				/* 274 __NR_vserver */
+				/* 275 __NR_mbind */
+				/* 276 __NR_get_mempolicy */
+				/* 277 __NR_set_mempolicy */
+#define __NR_mq_open 		278
+#define __NR_mq_unlink		279
+#define __NR_mq_timedsend	280
+#define __NR_mq_timedreceive	281
+#define __NR_mq_notify		282
+#define __NR_mq_getsetattr	283
+#define __NR_kexec_load		284
+#define __NR_waitid		285
+#define __NR_add_key		286
+#define __NR_request_key	287
+#define __NR_keyctl		288
+#define __NR_ioprio_set		289
+#define __NR_ioprio_get		290
+#define __NR_inotify_init	291
+#define __NR_inotify_add_watch	292
+#define __NR_inotify_rm_watch	293
+				/* 294 __NR_migrate_pages */
+#define __NR_openat		295
+#define __NR_mkdirat		296
+#define __NR_mknodat		297
+#define __NR_fchownat		298
+#define __NR_futimesat		299
+#define __NR_fstatat64		300
+#define __NR_unlinkat		301
+#define __NR_renameat		302
+#define __NR_linkat		303
+#define __NR_symlinkat		304
+#define __NR_readlinkat		305
+#define __NR_fchmodat		306
+#define __NR_faccessat		307
+#define __NR_pselect6		308
+#define __NR_ppoll		309
+#define __NR_unshare		310
+
+/* Blackfin private syscalls */
+#define __NR_sram_alloc		311
+#define __NR_sram_free		312
+#define __NR_dma_memcpy		313
+
+/* socket syscalls */
+#define __NR_accept		314
+#define __NR_bind		315
+#define __NR_connect		316
+#define __NR_getpeername	317
+#define __NR_getsockname	318
+#define __NR_getsockopt		319
+#define __NR_listen		320
+#define __NR_recv		321
+#define __NR_recvfrom		322
+#define __NR_recvmsg		323
+#define __NR_send		324
+#define __NR_sendmsg		325
+#define __NR_sendto		326
+#define __NR_setsockopt		327
+#define __NR_shutdown		328
+#define __NR_socket		329
+#define __NR_socketpair		330
+
+/* sysv ipc syscalls */
+#define __NR_semctl		331
+#define __NR_semget		332
+#define __NR_semop		333
+#define __NR_msgctl		334
+#define __NR_msgget		335
+#define __NR_msgrcv		336
+#define __NR_msgsnd		337
+#define __NR_shmat		338
+#define __NR_shmctl		339
+#define __NR_shmdt		340
+#define __NR_shmget		341
+
+#define __NR_splice		342
+#define __NR_sync_file_range	343
+#define __NR_tee		344
+#define __NR_vmsplice		345
+
+#define __NR_epoll_pwait	346
+#define __NR_utimensat		347
+#define __NR_signalfd		348
+#define __NR_timerfd_create	349
+#define __NR_eventfd		350
+#define __NR_pread64		351
+#define __NR_pwrite64		352
+#define __NR_fadvise64		353
+#define __NR_set_robust_list	354
+#define __NR_get_robust_list	355
+#define __NR_fallocate		356
+#define __NR_semtimedop		357
+#define __NR_timerfd_settime	358
+#define __NR_timerfd_gettime	359
+#define __NR_signalfd4		360
+#define __NR_eventfd2		361
+#define __NR_epoll_create1	362
+#define __NR_dup3		363
+#define __NR_pipe2		364
+#define __NR_inotify_init1	365
+
+#define __NR_syscall		366
+#define NR_syscalls		__NR_syscall
+
+/* Old optional stuff no one actually uses */
+#define __IGNORE_sysfs
+#define __IGNORE_uselib
+
+/* Implement the newer interfaces */
+#define __IGNORE_mmap
+#define __IGNORE_poll
+#define __IGNORE_select
+#define __IGNORE_utime
+
+/* Not relevant on no-mmu */
+#define __IGNORE_swapon
+#define __IGNORE_swapoff
+#define __IGNORE_msync
+#define __IGNORE_mlock
+#define __IGNORE_munlock
+#define __IGNORE_mlockall
+#define __IGNORE_munlockall
+#define __IGNORE_mincore
+#define __IGNORE_madvise
+#define __IGNORE_remap_file_pages
+#define __IGNORE_mbind
+#define __IGNORE_get_mempolicy
+#define __IGNORE_set_mempolicy
+#define __IGNORE_migrate_pages
+#define __IGNORE_move_pages
+#define __IGNORE_getcpu
+
+#ifdef __KERNEL__
+#define __ARCH_WANT_IPC_PARSE_VERSION
+#define __ARCH_WANT_STAT64
+#define __ARCH_WANT_SYS_ALARM
+#define __ARCH_WANT_SYS_GETHOSTNAME
+#define __ARCH_WANT_SYS_PAUSE
+#define __ARCH_WANT_SYS_SGETMASK
+#define __ARCH_WANT_SYS_TIME
+#define __ARCH_WANT_SYS_FADVISE64
+#define __ARCH_WANT_SYS_GETPGRP
+#define __ARCH_WANT_SYS_LLSEEK
+#define __ARCH_WANT_SYS_NICE
+#define __ARCH_WANT_SYS_RT_SIGACTION
+#define __ARCH_WANT_SYS_RT_SIGSUSPEND
+
+/*
+ * "Conditional" syscalls
+ *
+ * What we want is __attribute__((weak,alias("sys_ni_syscall"))),
+ * but it doesn't work on all toolchains, so we just do it by hand
+ */
+#define cond_syscall(x) asm(".weak\t_" #x "\n\t.set\t_" #x ",_sys_ni_syscall");
+
+#endif	/* __KERNEL__ */
+
+#endif				/* __ASM_BFIN_UNISTD_H */
diff --git a/include/asm-blackfin/user.h b/arch/blackfin/include/asm/user.h
index afe6a0e1f7ce..afe6a0e1f7ce 100644
--- a/include/asm-blackfin/user.h
+++ b/arch/blackfin/include/asm/user.h
diff --git a/arch/blackfin/kernel/Makefile b/arch/blackfin/kernel/Makefile
index 6140cd69c782..606adc78aa85 100644
--- a/arch/blackfin/kernel/Makefile
+++ b/arch/blackfin/kernel/Makefile
@@ -18,6 +18,5 @@ endif
 obj-$(CONFIG_BFIN_GPTIMERS)          += gptimers.o
 obj-$(CONFIG_MODULES)                += module.o
 obj-$(CONFIG_BFIN_DMA_5XX)           += bfin_dma_5xx.o
-obj-$(CONFIG_DUAL_CORE_TEST_MODULE)  += dualcore_test.o
 obj-$(CONFIG_KGDB)                   += kgdb.o
 obj-$(CONFIG_EARLY_PRINTK)           += early_printk.o
diff --git a/arch/blackfin/kernel/bfin_dma_5xx.c b/arch/blackfin/kernel/bfin_dma_5xx.c
index d54f19085f37..93229b3d6e3e 100644
--- a/arch/blackfin/kernel/bfin_dma_5xx.c
+++ b/arch/blackfin/kernel/bfin_dma_5xx.c
@@ -472,6 +472,40 @@ unsigned long get_dma_curr_addr(unsigned int channel)
 }
 EXPORT_SYMBOL(get_dma_curr_addr);
 
+#ifdef CONFIG_PM
+int blackfin_dma_suspend(void)
+{
+	int i;
+
+#ifdef CONFIG_BF561	/* IMDMA channels doesn't have a PERIPHERAL_MAP */
+	for (i = 0; i <= CH_MEM_STREAM3_SRC; i++) {
+#else
+	for (i = 0; i < MAX_BLACKFIN_DMA_CHANNEL; i++) {
+#endif
+		if (dma_ch[i].chan_status == DMA_CHANNEL_ENABLED) {
+			printk(KERN_ERR "DMA Channel %d failed to suspend\n", i);
+			return -EBUSY;
+		}
+
+		dma_ch[i].saved_peripheral_map = dma_ch[i].regs->peripheral_map;
+	}
+
+	return 0;
+}
+
+void blackfin_dma_resume(void)
+{
+	int i;
+
+#ifdef CONFIG_BF561	/* IMDMA channels doesn't have a PERIPHERAL_MAP */
+	for (i = 0; i <= CH_MEM_STREAM3_SRC; i++)
+#else
+	for (i = 0; i < MAX_BLACKFIN_DMA_CHANNEL; i++)
+#endif
+		dma_ch[i].regs->peripheral_map = dma_ch[i].saved_peripheral_map;
+}
+#endif
+
 static void *__dma_memcpy(void *dest, const void *src, size_t size)
 {
 	int direction;	/* 1 - address decrease, 0 - address increase */
diff --git a/arch/blackfin/kernel/bfin_gpio.c b/arch/blackfin/kernel/bfin_gpio.c
index b6d89d1644cc..ecbd141e0ef2 100644
--- a/arch/blackfin/kernel/bfin_gpio.c
+++ b/arch/blackfin/kernel/bfin_gpio.c
@@ -186,7 +186,10 @@ static struct str_ident {
 	char name[RESOURCE_LABEL_SIZE];
 } str_ident[MAX_RESOURCES];
 
-#if defined(CONFIG_PM) && !defined(CONFIG_BF54x)
+#if defined(CONFIG_PM)
+#if defined(CONFIG_BF54x)
+static struct gpio_port_s gpio_bank_saved[gpio_bank(MAX_BLACKFIN_GPIOS)];
+#else
 static unsigned short wakeup_map[gpio_bank(MAX_BLACKFIN_GPIOS)];
 static unsigned char wakeup_flags_map[MAX_BLACKFIN_GPIOS];
 static struct gpio_port_s gpio_bank_saved[gpio_bank(MAX_BLACKFIN_GPIOS)];
@@ -206,7 +209,7 @@ static unsigned int sic_iwr_irqs[gpio_bank(MAX_BLACKFIN_GPIOS)] = {IRQ_PORTF_INT
 #ifdef BF561_FAMILY
 static unsigned int sic_iwr_irqs[gpio_bank(MAX_BLACKFIN_GPIOS)] = {IRQ_PROG0_INTB, IRQ_PROG1_INTB, IRQ_PROG2_INTB};
 #endif
-
+#endif
 #endif /* CONFIG_PM */
 
 #if defined(BF548_FAMILY)
@@ -667,7 +670,7 @@ static int bfin_gpio_wakeup_type(unsigned gpio, unsigned char type)
 	return 0;
 }
 
-u32 bfin_pm_setup(void)
+u32 bfin_pm_standby_setup(void)
 {
 	u16 bank, mask, i, gpio;
 
@@ -679,7 +682,7 @@ u32 bfin_pm_setup(void)
 		gpio_bankb[bank]->maskb = 0;
 
 		if (mask) {
-#ifdef BF537_FAMILY
+#if defined(BF527_FAMILY) || defined(BF537_FAMILY)
 			gpio_bank_saved[bank].fer   = *port_fer[bank];
 #endif
 			gpio_bank_saved[bank].inen  = gpio_bankb[bank]->inen;
@@ -715,7 +718,7 @@ u32 bfin_pm_setup(void)
 	return 0;
 }
 
-void bfin_pm_restore(void)
+void bfin_pm_standby_restore(void)
 {
 	u16 bank, mask, i;
 
@@ -724,7 +727,7 @@ void bfin_pm_restore(void)
 		bank = gpio_bank(i);
 
 		if (mask) {
-#ifdef BF537_FAMILY
+#if defined(BF527_FAMILY) || defined(BF537_FAMILY)
 			*port_fer[bank]   	= gpio_bank_saved[bank].fer;
 #endif
 			gpio_bankb[bank]->inen  = gpio_bank_saved[bank].inen;
@@ -743,8 +746,111 @@ void bfin_pm_restore(void)
 	AWA_DUMMY_READ(maskb);
 }
 
+void bfin_gpio_pm_hibernate_suspend(void)
+{
+	int i, bank;
+
+	for (i = 0; i < MAX_BLACKFIN_GPIOS; i += GPIO_BANKSIZE) {
+		bank = gpio_bank(i);
+
+#if defined(BF527_FAMILY) || defined(BF537_FAMILY)
+			gpio_bank_saved[bank].fer   = *port_fer[bank];
+#ifdef BF527_FAMILY
+			gpio_bank_saved[bank].mux   = *port_mux[bank];
+#else
+			if (bank == 0)
+				gpio_bank_saved[bank].mux   = bfin_read_PORT_MUX();
+#endif
+#endif
+			gpio_bank_saved[bank].data  = gpio_bankb[bank]->data;
+			gpio_bank_saved[bank].inen  = gpio_bankb[bank]->inen;
+			gpio_bank_saved[bank].polar = gpio_bankb[bank]->polar;
+			gpio_bank_saved[bank].dir   = gpio_bankb[bank]->dir;
+			gpio_bank_saved[bank].edge  = gpio_bankb[bank]->edge;
+			gpio_bank_saved[bank].both  = gpio_bankb[bank]->both;
+			gpio_bank_saved[bank].maska  = gpio_bankb[bank]->maska;
+	}
+
+	AWA_DUMMY_READ(maska);
+}
+
+void bfin_gpio_pm_hibernate_restore(void)
+{
+	int i, bank;
+
+	for (i = 0; i < MAX_BLACKFIN_GPIOS; i += GPIO_BANKSIZE) {
+			bank = gpio_bank(i);
+
+#if defined(BF527_FAMILY) || defined(BF537_FAMILY)
+#ifdef BF527_FAMILY
+			*port_mux[bank] = gpio_bank_saved[bank].mux;
+#else
+			if (bank == 0)
+				bfin_write_PORT_MUX(gpio_bank_saved[bank].mux);
+#endif
+			*port_fer[bank]   	= gpio_bank_saved[bank].fer;
+#endif
+			gpio_bankb[bank]->inen  = gpio_bank_saved[bank].inen;
+			gpio_bankb[bank]->dir   = gpio_bank_saved[bank].dir;
+			gpio_bankb[bank]->polar = gpio_bank_saved[bank].polar;
+			gpio_bankb[bank]->edge  = gpio_bank_saved[bank].edge;
+			gpio_bankb[bank]->both  = gpio_bank_saved[bank].both;
+
+			gpio_bankb[bank]->data_set = gpio_bank_saved[bank].data
+							| gpio_bank_saved[bank].dir;
+
+			gpio_bankb[bank]->maska = gpio_bank_saved[bank].maska;
+	}
+	AWA_DUMMY_READ(maska);
+}
+
+
 #endif
 #else /* BF548_FAMILY */
+#ifdef CONFIG_PM
+
+u32 bfin_pm_standby_setup(void)
+{
+	return 0;
+}
+
+void bfin_pm_standby_restore(void)
+{
+
+}
+
+void bfin_gpio_pm_hibernate_suspend(void)
+{
+	int i, bank;
+
+	for (i = 0; i < MAX_BLACKFIN_GPIOS; i += GPIO_BANKSIZE) {
+		bank = gpio_bank(i);
+
+			gpio_bank_saved[bank].fer  = gpio_array[bank]->port_fer;
+			gpio_bank_saved[bank].mux  = gpio_array[bank]->port_mux;
+			gpio_bank_saved[bank].data  = gpio_array[bank]->port_data;
+			gpio_bank_saved[bank].data  = gpio_array[bank]->port_data;
+			gpio_bank_saved[bank].inen  = gpio_array[bank]->port_inen;
+			gpio_bank_saved[bank].dir   = gpio_array[bank]->port_dir_set;
+	}
+}
+
+void bfin_gpio_pm_hibernate_restore(void)
+{
+	int i, bank;
+
+	for (i = 0; i < MAX_BLACKFIN_GPIOS; i += GPIO_BANKSIZE) {
+			bank = gpio_bank(i);
+
+			gpio_array[bank]->port_mux  = gpio_bank_saved[bank].mux;
+			gpio_array[bank]->port_fer  = gpio_bank_saved[bank].fer;
+			gpio_array[bank]->port_inen  = gpio_bank_saved[bank].inen;
+			gpio_array[bank]->port_dir_set   = gpio_bank_saved[bank].dir;
+			gpio_array[bank]->port_set = gpio_bank_saved[bank].data
+							| gpio_bank_saved[bank].dir;
+	}
+}
+#endif
 
 unsigned short get_gpio_dir(unsigned gpio)
 {
diff --git a/arch/blackfin/kernel/cplb-mpu/cacheinit.c b/arch/blackfin/kernel/cplb-mpu/cacheinit.c
index 9eecfa403187..a8b712a24c59 100644
--- a/arch/blackfin/kernel/cplb-mpu/cacheinit.c
+++ b/arch/blackfin/kernel/cplb-mpu/cacheinit.c
@@ -25,7 +25,7 @@
 #include <asm/cplbinit.h>
 
 #if defined(CONFIG_BFIN_ICACHE)
-void bfin_icache_init(void)
+void __init bfin_icache_init(void)
 {
 	unsigned long ctrl;
 	int i;
@@ -43,7 +43,7 @@ void bfin_icache_init(void)
 #endif
 
 #if defined(CONFIG_BFIN_DCACHE)
-void bfin_dcache_init(void)
+void __init bfin_dcache_init(void)
 {
 	unsigned long ctrl;
 	int i;
diff --git a/arch/blackfin/kernel/cplb-nompu/cacheinit.c b/arch/blackfin/kernel/cplb-nompu/cacheinit.c
index 8a18399f6072..bd0831592c2c 100644
--- a/arch/blackfin/kernel/cplb-nompu/cacheinit.c
+++ b/arch/blackfin/kernel/cplb-nompu/cacheinit.c
@@ -25,7 +25,7 @@
 #include <asm/cplbinit.h>
 
 #if defined(CONFIG_BFIN_ICACHE)
-void bfin_icache_init(void)
+void __init bfin_icache_init(void)
 {
 	unsigned long *table = icplb_table;
 	unsigned long ctrl;
@@ -47,7 +47,7 @@ void bfin_icache_init(void)
 #endif
 
 #if defined(CONFIG_BFIN_DCACHE)
-void bfin_dcache_init(void)
+void __init bfin_dcache_init(void)
 {
 	unsigned long *table = dcplb_table;
 	unsigned long ctrl;
diff --git a/arch/blackfin/kernel/cplb-nompu/cplbhdlr.S b/arch/blackfin/kernel/cplb-nompu/cplbhdlr.S
index 2788532de72b..ecbabc0a1fed 100644
--- a/arch/blackfin/kernel/cplb-nompu/cplbhdlr.S
+++ b/arch/blackfin/kernel/cplb-nompu/cplbhdlr.S
@@ -125,6 +125,6 @@ ENTRY(__cplb_hdr)
 	SP += -12;
 	call _panic_cplb_error;
 	SP += 12;
-	JUMP _handle_bad_cplb;
+	JUMP.L _handle_bad_cplb;
 
 ENDPROC(__cplb_hdr)
diff --git a/arch/blackfin/kernel/cplb-nompu/cplbinit.c b/arch/blackfin/kernel/cplb-nompu/cplbinit.c
index 6be0c50122e8..728f708d3981 100644
--- a/arch/blackfin/kernel/cplb-nompu/cplbinit.c
+++ b/arch/blackfin/kernel/cplb-nompu/cplbinit.c
@@ -26,11 +26,7 @@
 #include <asm/cplb.h>
 #include <asm/cplbinit.h>
 
-#ifdef CONFIG_MAX_MEM_SIZE
-# define CPLB_MEM CONFIG_MAX_MEM_SIZE
-#else
-# define CPLB_MEM CONFIG_MEM_SIZE
-#endif
+#define CPLB_MEM CONFIG_MAX_MEM_SIZE
 
 /*
 * Number of required data CPLB switchtable entries
@@ -168,17 +164,13 @@ static struct cplb_desc cplb_data[] = {
 		.name = "Asynchronous Memory Banks",
 	},
 	{
-#ifdef L2_START
 		.start = L2_START,
 		.end = L2_START + L2_LENGTH,
 		.psize = SIZE_1M,
 		.attr = SWITCH_T | I_CPLB | D_CPLB,
 		.i_conf = L2_MEMORY,
 		.d_conf = L2_MEMORY,
-		.valid = 1,
-#else
-		.valid = 0,
-#endif
+		.valid = (L2_LENGTH > 0),
 		.name = "L2 Memory",
 	},
 	{
diff --git a/arch/blackfin/kernel/dualcore_test.c b/arch/blackfin/kernel/dualcore_test.c
deleted file mode 100644
index 0fcba74840b7..000000000000
--- a/arch/blackfin/kernel/dualcore_test.c
+++ /dev/null
@@ -1,49 +0,0 @@
-/*
- * File:         arch/blackfin/kernel/dualcore_test.c
- * Based on:
- * Author:
- *
- * Created:
- * Description:  Small test code for CoreB on a BF561
- *
- * Modified:
- *               Copyright 2004-2006 Analog Devices Inc.
- *
- * Bugs:         Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, see the file COPYING, or write
- * to the Free Software Foundation, Inc.,
- * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
- */
-
-#include <linux/init.h>
-#include <linux/module.h>
-
-static int *testarg = (int *)0xfeb00000;
-
-static int test_init(void)
-{
-	*testarg = 1;
-	printk(KERN_INFO "Dual core test module inserted: set testarg = [%d]\n @ [%p]\n",
-	       *testarg, testarg);
-	return 0;
-}
-
-static void test_exit(void)
-{
-	printk(KERN_INFO "Dual core test module removed: testarg = [%d]\n", *testarg);
-}
-
-module_init(test_init);
-module_exit(test_exit);
diff --git a/arch/blackfin/kernel/entry.S b/arch/blackfin/kernel/entry.S
index 65f4e67a65c4..faea88ebb2ef 100644
--- a/arch/blackfin/kernel/entry.S
+++ b/arch/blackfin/kernel/entry.S
@@ -32,7 +32,7 @@
 #include <asm/errno.h>
 #include <asm/asm-offsets.h>
 
-#include <asm/mach-common/context.S>
+#include <asm/context.S>
 
 #ifdef CONFIG_EXCPT_IRQ_SYSC_L1
 .section .l1.text
@@ -64,6 +64,11 @@ ENDPROC(_ret_from_fork)
 
 ENTRY(_sys_fork)
 	r0 = -EINVAL;
+#if (ANOMALY_05000371)
+	nop;
+	nop;
+	nop;
+#endif
 	rts;
 ENDPROC(_sys_fork)
 
diff --git a/arch/blackfin/kernel/kgdb.c b/arch/blackfin/kernel/kgdb.c
index a9c15515bfd7..a1f9641a6425 100644
--- a/arch/blackfin/kernel/kgdb.c
+++ b/arch/blackfin/kernel/kgdb.c
@@ -203,6 +203,8 @@ struct hw_breakpoint {
 
 int kgdb_arch_init(void)
 {
+	debugger_step = 0;
+
 	kgdb_remove_all_hw_break();
 	return 0;
 }
@@ -368,6 +370,7 @@ int kgdb_arch_handle_exception(int exceptionVector, int signo,
 	char *ptr;
 	int newPC;
 	int wp_status;
+	int i;
 
 	switch (remcom_in_buffer[0]) {
 	case 'c':
@@ -392,7 +395,18 @@ int kgdb_arch_handle_exception(int exceptionVector, int signo,
 		/* set the trace bit if we're stepping */
 		if (remcom_in_buffer[0] == 's') {
 			linux_regs->syscfg |= 0x1;
-			debugger_step = 1;
+			debugger_step = linux_regs->ipend;
+			debugger_step >>= 6;
+			for (i = 10; i > 0; i--, debugger_step >>= 1)
+				if (debugger_step & 1)
+					break;
+			/* i indicate event priority of current stopped instruction
+			 * user space instruction is 0, IVG15 is 1, IVTMR is 10.
+			 * debugger_step > 0 means in single step mode
+			 */
+			debugger_step = i + 1;
+		} else {
+			debugger_step = 0;
 		}
 
 		wp_status = bfin_read_WPSTAT();
diff --git a/arch/blackfin/kernel/module.c b/arch/blackfin/kernel/module.c
index 14a42848f37f..e1bebc80a5bf 100644
--- a/arch/blackfin/kernel/module.c
+++ b/arch/blackfin/kernel/module.c
@@ -173,7 +173,7 @@ module_frob_arch_sections(Elf_Ehdr * hdr, Elf_Shdr * sechdrs,
 	for (s = sechdrs; s < sechdrs_end; ++s) {
 		if ((strcmp(".l1.text", secstrings + s->sh_name) == 0) ||
 		    ((strcmp(".text", secstrings + s->sh_name) == 0) &&
-		     (hdr->e_flags & FLG_CODE_IN_L1) && (s->sh_size > 0))) {
+		     (hdr->e_flags & EF_BFIN_CODE_IN_L1) && (s->sh_size > 0))) {
 			dest = l1_inst_sram_alloc(s->sh_size);
 			mod->arch.text_l1 = dest;
 			if (dest == NULL) {
@@ -188,7 +188,7 @@ module_frob_arch_sections(Elf_Ehdr * hdr, Elf_Shdr * sechdrs,
 		}
 		if ((strcmp(".l1.data", secstrings + s->sh_name) == 0) ||
 		    ((strcmp(".data", secstrings + s->sh_name) == 0) &&
-		     (hdr->e_flags & FLG_DATA_IN_L1) && (s->sh_size > 0))) {
+		     (hdr->e_flags & EF_BFIN_DATA_IN_L1) && (s->sh_size > 0))) {
 			dest = l1_data_sram_alloc(s->sh_size);
 			mod->arch.data_a_l1 = dest;
 			if (dest == NULL) {
@@ -203,7 +203,7 @@ module_frob_arch_sections(Elf_Ehdr * hdr, Elf_Shdr * sechdrs,
 		}
 		if (strcmp(".l1.bss", secstrings + s->sh_name) == 0 ||
 		    ((strcmp(".bss", secstrings + s->sh_name) == 0) &&
-		     (hdr->e_flags & FLG_DATA_IN_L1) && (s->sh_size > 0))) {
+		     (hdr->e_flags & EF_BFIN_DATA_IN_L1) && (s->sh_size > 0))) {
 			dest = l1_data_sram_alloc(s->sh_size);
 			mod->arch.bss_a_l1 = dest;
 			if (dest == NULL) {
@@ -242,6 +242,51 @@ module_frob_arch_sections(Elf_Ehdr * hdr, Elf_Shdr * sechdrs,
 			s->sh_flags &= ~SHF_ALLOC;
 			s->sh_addr = (unsigned long)dest;
 		}
+		if ((strcmp(".l2.text", secstrings + s->sh_name) == 0) ||
+		    ((strcmp(".text", secstrings + s->sh_name) == 0) &&
+		     (hdr->e_flags & EF_BFIN_CODE_IN_L2) && (s->sh_size > 0))) {
+			dest = l2_sram_alloc(s->sh_size);
+			mod->arch.text_l2 = dest;
+			if (dest == NULL) {
+				printk(KERN_ERR
+				       "module %s: L2 SRAM allocation failed\n",
+				       mod->name);
+				return -1;
+			}
+			memcpy(dest, (void *)s->sh_addr, s->sh_size);
+			s->sh_flags &= ~SHF_ALLOC;
+			s->sh_addr = (unsigned long)dest;
+		}
+		if ((strcmp(".l2.data", secstrings + s->sh_name) == 0) ||
+		    ((strcmp(".data", secstrings + s->sh_name) == 0) &&
+		     (hdr->e_flags & EF_BFIN_DATA_IN_L2) && (s->sh_size > 0))) {
+			dest = l2_sram_alloc(s->sh_size);
+			mod->arch.data_l2 = dest;
+			if (dest == NULL) {
+				printk(KERN_ERR
+					"module %s: L2 SRAM allocation failed\n",
+					mod->name);
+				return -1;
+			}
+			memcpy(dest, (void *)s->sh_addr, s->sh_size);
+			s->sh_flags &= ~SHF_ALLOC;
+			s->sh_addr = (unsigned long)dest;
+		}
+		if (strcmp(".l2.bss", secstrings + s->sh_name) == 0 ||
+		    ((strcmp(".bss", secstrings + s->sh_name) == 0) &&
+		     (hdr->e_flags & EF_BFIN_DATA_IN_L2) && (s->sh_size > 0))) {
+			dest = l2_sram_alloc(s->sh_size);
+			mod->arch.bss_l2 = dest;
+			if (dest == NULL) {
+				printk(KERN_ERR
+					"module %s: L2 SRAM allocation failed\n",
+					mod->name);
+				return -1;
+			}
+			memset(dest, 0, s->sh_size);
+			s->sh_flags &= ~SHF_ALLOC;
+			s->sh_addr = (unsigned long)dest;
+		}
 	}
 	return 0;
 }
@@ -411,9 +456,10 @@ module_finalize(const Elf_Ehdr * hdr,
 			continue;
 
 		if ((sechdrs[i].sh_type == SHT_RELA) &&
-		    ((strcmp(".rela.l1.text", secstrings + sechdrs[i].sh_name) == 0) ||
+		    ((strcmp(".rela.l2.text", secstrings + sechdrs[i].sh_name) == 0) ||
+		    (strcmp(".rela.l1.text", secstrings + sechdrs[i].sh_name) == 0) ||
 		    ((strcmp(".rela.text", secstrings + sechdrs[i].sh_name) == 0) &&
-			 (hdr->e_flags & FLG_CODE_IN_L1)))) {
+			(hdr->e_flags & (EF_BFIN_CODE_IN_L1|EF_BFIN_CODE_IN_L2))))) {
 			apply_relocate_add((Elf_Shdr *) sechdrs, strtab,
 					   symindex, i, mod);
 		}
@@ -423,14 +469,12 @@ module_finalize(const Elf_Ehdr * hdr,
 
 void module_arch_cleanup(struct module *mod)
 {
-	if (mod->arch.text_l1)
-		l1_inst_sram_free((void *)mod->arch.text_l1);
-	if (mod->arch.data_a_l1)
-		l1_data_sram_free((void *)mod->arch.data_a_l1);
-	if (mod->arch.bss_a_l1)
-		l1_data_sram_free((void *)mod->arch.bss_a_l1);
-	if (mod->arch.data_b_l1)
-		l1_data_B_sram_free((void *)mod->arch.data_b_l1);
-	if (mod->arch.bss_b_l1)
-		l1_data_B_sram_free((void *)mod->arch.bss_b_l1);
+	l1_inst_sram_free(mod->arch.text_l1);
+	l1_data_A_sram_free(mod->arch.data_a_l1);
+	l1_data_A_sram_free(mod->arch.bss_a_l1);
+	l1_data_B_sram_free(mod->arch.data_b_l1);
+	l1_data_B_sram_free(mod->arch.bss_b_l1);
+	l2_sram_free(mod->arch.text_l2);
+	l2_sram_free(mod->arch.data_l2);
+	l2_sram_free(mod->arch.bss_l2);
 }
diff --git a/arch/blackfin/kernel/ptrace.c b/arch/blackfin/kernel/ptrace.c
index f51ab088098e..bf1a51d8e608 100644
--- a/arch/blackfin/kernel/ptrace.c
+++ b/arch/blackfin/kernel/ptrace.c
@@ -220,6 +220,20 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data)
 				copied = sizeof(tmp);
 			} else
 #endif
+#if L1_DATA_A_LENGTH != 0
+			if (addr + add >= L1_DATA_A_START
+			    && addr + add + sizeof(tmp) <= L1_DATA_A_START + L1_DATA_A_LENGTH) {
+				memcpy(&tmp, (const void *)(addr + add), sizeof(tmp));
+				copied = sizeof(tmp);
+			} else
+#endif
+#if L1_DATA_B_LENGTH != 0
+			if (addr + add >= L1_DATA_B_START
+			    && addr + add + sizeof(tmp) <= L1_DATA_B_START + L1_DATA_B_LENGTH) {
+				memcpy(&tmp, (const void *)(addr + add), sizeof(tmp));
+				copied = sizeof(tmp);
+			} else
+#endif
 			if (addr + add >= FIXED_CODE_START
 			    && addr + add + sizeof(tmp) <= FIXED_CODE_END) {
 				memcpy(&tmp, (const void *)(addr + add), sizeof(tmp));
@@ -290,6 +304,20 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data)
 				copied = sizeof(data);
 			} else
 #endif
+#if L1_DATA_A_LENGTH != 0
+			if (addr + add >= L1_DATA_A_START
+			    && addr + add + sizeof(data) <= L1_DATA_A_START + L1_DATA_A_LENGTH) {
+				memcpy((void *)(addr + add), &data, sizeof(data));
+				copied = sizeof(data);
+			} else
+#endif
+#if L1_DATA_B_LENGTH != 0
+			if (addr + add >= L1_DATA_B_START
+			    && addr + add + sizeof(data) <= L1_DATA_B_START + L1_DATA_B_LENGTH) {
+				memcpy((void *)(addr + add), &data, sizeof(data));
+				copied = sizeof(data);
+			} else
+#endif
 			if (addr + add >= FIXED_CODE_START
 			    && addr + add + sizeof(data) <= FIXED_CODE_END) {
 				memcpy((void *)(addr + add), &data, sizeof(data));
diff --git a/arch/blackfin/kernel/setup.c b/arch/blackfin/kernel/setup.c
index 8efea004aecb..7a82d10b4ebf 100644
--- a/arch/blackfin/kernel/setup.c
+++ b/arch/blackfin/kernel/setup.c
@@ -52,6 +52,7 @@ EXPORT_SYMBOL(mtd_size);
 #endif
 
 char __initdata command_line[COMMAND_LINE_SIZE];
+unsigned int __initdata *__retx;
 
 /* boot memmap, for parsing "memmap=" */
 #define BFIN_MEMMAP_MAX		128 /* number of entries in bfin_memmap */
@@ -104,6 +105,7 @@ void __init bf53x_relocate_l1_mem(void)
 	unsigned long l1_code_length;
 	unsigned long l1_data_a_length;
 	unsigned long l1_data_b_length;
+	unsigned long l2_length;
 
 	l1_code_length = _etext_l1 - _stext_l1;
 	if (l1_code_length > L1_CODE_LENGTH)
@@ -129,6 +131,15 @@ void __init bf53x_relocate_l1_mem(void)
 	/* Copy _sdata_b_l1 to _ebss_b_l1 to L1 data bank B SRAM */
 	dma_memcpy(_sdata_b_l1, _l1_lma_start + l1_code_length +
 			l1_data_a_length, l1_data_b_length);
+
+	if (L2_LENGTH != 0) {
+		l2_length = _ebss_l2 - _stext_l2;
+		if (l2_length > L2_LENGTH)
+			panic("L2 SRAM Overflow\n");
+
+		/* Copy _stext_l2 to _edata_l2 to L2 SRAM */
+		dma_memcpy(_stext_l2, _l2_lma_start, l2_length);
+	}
 }
 
 /* add_memory_region to memmap */
@@ -664,11 +675,8 @@ static __init void setup_bootmem_allocator(void)
 })
 static inline int __init get_mem_size(void)
 {
-#ifdef CONFIG_MEM_SIZE
-	return CONFIG_MEM_SIZE;
-#else
-# if defined(EBIU_SDBCTL)
-#  if defined(BF561_FAMILY)
+#if defined(EBIU_SDBCTL)
+# if defined(BF561_FAMILY)
 	int ret = 0;
 	u32 sdbctl = bfin_read_EBIU_SDBCTL();
 	ret += EBSZ_TO_MEG(sdbctl >>  0);
@@ -676,10 +684,10 @@ static inline int __init get_mem_size(void)
 	ret += EBSZ_TO_MEG(sdbctl >> 16);
 	ret += EBSZ_TO_MEG(sdbctl >> 24);
 	return ret;
-#  else
+# else
 	return EBSZ_TO_MEG(bfin_read_EBIU_SDBCTL());
-#  endif
-# elif defined(EBIU_DDRCTL1)
+# endif
+#elif defined(EBIU_DDRCTL1)
 	u32 ddrctl = bfin_read_EBIU_DDRCTL1();
 	int ret = 0;
 	switch (ddrctl & 0xc0000) {
@@ -693,8 +701,9 @@ static inline int __init get_mem_size(void)
 		case DEVWD_8:  ret *= 2;
 		case DEVWD_16: break;
 	}
+	if ((ddrctl & 0xc000) == 0x4000)
+		ret *= 2;
 	return ret;
-# endif
 #endif
 	BUG();
 }
@@ -730,6 +739,16 @@ void __init setup_arch(char **cmdline_p)
 
 	memory_setup();
 
+	/* Initialize Async memory banks */
+	bfin_write_EBIU_AMBCTL0(AMBCTL0VAL);
+	bfin_write_EBIU_AMBCTL1(AMBCTL1VAL);
+	bfin_write_EBIU_AMGCTL(AMGCTLVAL);
+#ifdef CONFIG_EBIU_MBSCTLVAL
+	bfin_write_EBIU_MBSCTL(CONFIG_EBIU_MBSCTLVAL);
+	bfin_write_EBIU_MODE(CONFIG_EBIU_MODEVAL);
+	bfin_write_EBIU_FCTL(CONFIG_EBIU_FCTLVAL);
+#endif
+
 	cclk = get_cclk();
 	sclk = get_sclk();
 
@@ -763,8 +782,15 @@ void __init setup_arch(char **cmdline_p)
 
 	_bfin_swrst = bfin_read_SWRST();
 
+	/* If we double fault, reset the system - otherwise we hang forever */
+	bfin_write_SWRST(DOUBLE_FAULT);
+
 	if (_bfin_swrst & RESET_DOUBLE)
-		printk(KERN_INFO "Recovering from Double Fault event\n");
+		/*
+		 * don't decode the address, since you don't know if this
+		 * kernel's symbol map is the same as the crashing kernel
+		 */
+		printk(KERN_INFO "Recovering from Double Fault event at %pF\n", __retx);
 	else if (_bfin_swrst & RESET_WDOG)
 		printk(KERN_INFO "Recovering from Watchdog event\n");
 	else if (_bfin_swrst & RESET_SOFTWARE)
@@ -842,38 +868,55 @@ static int __init topology_init(void)
 
 subsys_initcall(topology_init);
 
+/* Get the voltage input multiplier */
+static u_long cached_vco_pll_ctl, cached_vco;
 static u_long get_vco(void)
 {
 	u_long msel;
-	u_long vco;
 
-	msel = (bfin_read_PLL_CTL() >> 9) & 0x3F;
+	u_long pll_ctl = bfin_read_PLL_CTL();
+	if (pll_ctl == cached_vco_pll_ctl)
+		return cached_vco;
+	else
+		cached_vco_pll_ctl = pll_ctl;
+
+	msel = (pll_ctl >> 9) & 0x3F;
 	if (0 == msel)
 		msel = 64;
 
-	vco = CONFIG_CLKIN_HZ;
-	vco >>= (1 & bfin_read_PLL_CTL());	/* DF bit */
-	vco = msel * vco;
-	return vco;
+	cached_vco = CONFIG_CLKIN_HZ;
+	cached_vco >>= (1 & pll_ctl);	/* DF bit */
+	cached_vco *= msel;
+	return cached_vco;
 }
 
 /* Get the Core clock */
+static u_long cached_cclk_pll_div, cached_cclk;
 u_long get_cclk(void)
 {
 	u_long csel, ssel;
+
 	if (bfin_read_PLL_STAT() & 0x1)
 		return CONFIG_CLKIN_HZ;
 
 	ssel = bfin_read_PLL_DIV();
+	if (ssel == cached_cclk_pll_div)
+		return cached_cclk;
+	else
+		cached_cclk_pll_div = ssel;
+
 	csel = ((ssel >> 4) & 0x03);
 	ssel &= 0xf;
 	if (ssel && ssel < (1 << csel))	/* SCLK > CCLK */
-		return get_vco() / ssel;
-	return get_vco() >> csel;
+		cached_cclk = get_vco() / ssel;
+	else
+		cached_cclk = get_vco() >> csel;
+	return cached_cclk;
 }
 EXPORT_SYMBOL(get_cclk);
 
 /* Get the System clock */
+static u_long cached_sclk_pll_div, cached_sclk;
 u_long get_sclk(void)
 {
 	u_long ssel;
@@ -881,13 +924,20 @@ u_long get_sclk(void)
 	if (bfin_read_PLL_STAT() & 0x1)
 		return CONFIG_CLKIN_HZ;
 
-	ssel = (bfin_read_PLL_DIV() & 0xf);
+	ssel = bfin_read_PLL_DIV();
+	if (ssel == cached_sclk_pll_div)
+		return cached_sclk;
+	else
+		cached_sclk_pll_div = ssel;
+
+	ssel &= 0xf;
 	if (0 == ssel) {
 		printk(KERN_WARNING "Invalid System Clock\n");
 		ssel = 1;
 	}
 
-	return get_vco() / ssel;
+	cached_sclk = get_vco() / ssel;
+	return cached_sclk;
 }
 EXPORT_SYMBOL(get_sclk);
 
@@ -916,7 +966,7 @@ static int show_cpuinfo(struct seq_file *m, void *v)
 	uint32_t revid;
 
 	u_long cclk = 0, sclk = 0;
-	u_int dcache_size = 0, dsup_banks = 0;
+	u_int icache_size = BFIN_ICACHESIZE / 1024, dcache_size = 0, dsup_banks = 0;
 
 	cpu = CPU;
 	mmu = "none";
@@ -985,12 +1035,15 @@ static int show_cpuinfo(struct seq_file *m, void *v)
 	}
 
 	/* Is it turned on? */
-	if (!((bfin_read_DMEM_CONTROL()) & (ENDCPLB | DMC_ENABLE)))
+	if ((bfin_read_DMEM_CONTROL() & (ENDCPLB | DMC_ENABLE)) != (ENDCPLB | DMC_ENABLE))
 		dcache_size = 0;
 
+	if ((bfin_read_IMEM_CONTROL() & (IMC | ENICPLB)) == (IMC | ENICPLB))
+		icache_size = 0;
+
 	seq_printf(m, "cache size\t: %d KB(L1 icache) "
 		"%d KB(L1 dcache-%s) %d KB(L2 cache)\n",
-		BFIN_ICACHESIZE / 1024, dcache_size,
+		icache_size, dcache_size,
 #if defined CONFIG_BFIN_WB
 		"wb"
 #elif defined CONFIG_BFIN_WT
@@ -1000,14 +1053,18 @@ static int show_cpuinfo(struct seq_file *m, void *v)
 
 	seq_printf(m, "%s\n", cache);
 
-	seq_printf(m, "icache setup\t: %d Sub-banks/%d Ways, %d Lines/Way\n",
-		   BFIN_ISUBBANKS, BFIN_IWAYS, BFIN_ILINES);
+	if (icache_size)
+		seq_printf(m, "icache setup\t: %d Sub-banks/%d Ways, %d Lines/Way\n",
+			   BFIN_ISUBBANKS, BFIN_IWAYS, BFIN_ILINES);
+	else
+		seq_printf(m, "icache setup\t: off\n");
+
 	seq_printf(m,
 		   "dcache setup\t: %d Super-banks/%d Sub-banks/%d Ways, %d Lines/Way\n",
 		   dsup_banks, BFIN_DSUBBANKS, BFIN_DWAYS,
 		   BFIN_DLINES);
 #ifdef CONFIG_BFIN_ICACHE_LOCK
-	switch (read_iloc()) {
+	switch ((bfin_read_IMEM_CONTROL() >> 3) & WAYALL_L) {
 	case WAY0_L:
 		seq_printf(m, "Way0 Locked-Down\n");
 		break;
diff --git a/arch/blackfin/kernel/traps.c b/arch/blackfin/kernel/traps.c
index f061f5181623..9a9d5083acfd 100644
--- a/arch/blackfin/kernel/traps.c
+++ b/arch/blackfin/kernel/traps.c
@@ -69,8 +69,6 @@ void __init trap_init(void)
 
 unsigned long saved_icplb_fault_addr, saved_dcplb_fault_addr;
 
-int kstack_depth_to_print = 48;
-
 static void decode_address(char *buf, unsigned long address)
 {
 	struct vm_list_struct *vml;
@@ -163,6 +161,9 @@ static void decode_address(char *buf, unsigned long address)
 				if (!in_atomic)
 					mmput(mm);
 
+				if (!strlen(buf))
+					sprintf(buf, "<0x%p> [ %s ] dynamic memory", (void *)address, name);
+
 				goto done;
 			}
 
@@ -173,7 +174,7 @@ static void decode_address(char *buf, unsigned long address)
 	}
 
 	/* we were unable to find this address anywhere */
-	sprintf(buf, "<0x%p> /* unknown address */", (void *)address);
+	sprintf(buf, "<0x%p> /* kernel dynamic memory */", (void *)address);
 
 done:
 	write_unlock_irqrestore(&tasklist_lock, flags);
@@ -494,7 +495,7 @@ asmlinkage void trap_c(struct pt_regs *fp)
 	BUG_ON(sig == 0);
 
 	if (sig != SIGTRAP) {
-		unsigned long stack;
+		unsigned long *stack;
 		dump_bfin_process(fp);
 		dump_bfin_mem(fp);
 		show_regs(fp);
@@ -508,14 +509,23 @@ asmlinkage void trap_c(struct pt_regs *fp)
 		else
 #endif
 			dump_bfin_trace_buffer();
-		show_stack(current, &stack);
+
 		if (oops_in_progress) {
+			/* Dump the current kernel stack */
+			printk(KERN_NOTICE "\n" KERN_NOTICE "Kernel Stack\n");
+			show_stack(current, NULL);
+
 			print_modules();
 #ifndef CONFIG_ACCESS_CHECK
 			printk(KERN_EMERG "Please turn on "
 			       "CONFIG_ACCESS_CHECK\n");
 #endif
 			panic("Kernel exception");
+		} else {
+			/* Dump the user space stack */
+			stack = (unsigned long *)rdusp();
+			printk(KERN_NOTICE "Userspace Stack\n");
+			show_stack(NULL, stack);
 		}
 	}
 
@@ -532,11 +542,114 @@ asmlinkage void trap_c(struct pt_regs *fp)
 
 #define EXPAND_LEN ((1 << CONFIG_DEBUG_BFIN_HWTRACE_EXPAND_LEN) * 256 - 1)
 
+/*
+ * Similar to get_user, do some address checking, then dereference
+ * Return true on sucess, false on bad address
+ */
+bool get_instruction(unsigned short *val, unsigned short *address)
+{
+
+	unsigned long addr;
+
+	addr = (unsigned long)address;
+
+	/* Check for odd addresses */
+	if (addr & 0x1)
+		return false;
+
+	/* Check that things do not wrap around */
+	if (addr > (addr + 2))
+		return false;
+
+	/*
+	 * Since we are in exception context, we need to do a little address checking
+	 * We need to make sure we are only accessing valid memory, and
+	 * we don't read something in the async space that can hang forever
+	 */
+	if ((addr >= FIXED_CODE_START && (addr + 2) <= physical_mem_end) ||
+#if L2_LENGTH != 0
+	    (addr >= L2_START && (addr + 2) <= (L2_START + L2_LENGTH)) ||
+#endif
+	    (addr >= BOOT_ROM_START && (addr + 2) <= (BOOT_ROM_START + BOOT_ROM_LENGTH)) ||
+#if L1_DATA_A_LENGTH != 0
+	    (addr >= L1_DATA_A_START && (addr + 2) <= (L1_DATA_A_START + L1_DATA_A_LENGTH)) ||
+#endif
+#if L1_DATA_B_LENGTH != 0
+	    (addr >= L1_DATA_B_START && (addr + 2) <= (L1_DATA_B_START + L1_DATA_B_LENGTH)) ||
+#endif
+	    (addr >= L1_SCRATCH_START && (addr + 2) <= (L1_SCRATCH_START + L1_SCRATCH_LENGTH)) ||
+	    (!(bfin_read_EBIU_AMBCTL0() & B0RDYEN) &&
+	       addr >= ASYNC_BANK0_BASE && (addr + 2) <= (ASYNC_BANK0_BASE + ASYNC_BANK0_SIZE)) ||
+	    (!(bfin_read_EBIU_AMBCTL0() & B1RDYEN) &&
+	       addr >= ASYNC_BANK1_BASE && (addr + 2) <= (ASYNC_BANK1_BASE + ASYNC_BANK1_SIZE)) ||
+	    (!(bfin_read_EBIU_AMBCTL1() & B2RDYEN) &&
+	       addr >= ASYNC_BANK2_BASE && (addr + 2) <= (ASYNC_BANK2_BASE + ASYNC_BANK1_SIZE)) ||
+	    (!(bfin_read_EBIU_AMBCTL1() & B3RDYEN) &&
+	      addr >= ASYNC_BANK3_BASE && (addr + 2) <= (ASYNC_BANK3_BASE + ASYNC_BANK1_SIZE))) {
+		*val = *address;
+		return true;
+	}
+
+#if L1_CODE_LENGTH != 0
+	if (addr >= L1_CODE_START && (addr + 2) <= (L1_CODE_START + L1_CODE_LENGTH)) {
+		dma_memcpy(val, address, 2);
+		return true;
+	}
+#endif
+
+
+	return false;
+}
+
+/* 
+ * decode the instruction if we are printing out the trace, as it
+ * makes things easier to follow, without running it through objdump
+ * These are the normal instructions which cause change of flow, which
+ * would be at the source of the trace buffer
+ */
+void decode_instruction(unsigned short *address)
+{
+	unsigned short opcode;
+
+	if (get_instruction(&opcode, address)) {
+		if (opcode == 0x0010)
+			printk("RTS");
+		else if (opcode == 0x0011)
+			printk("RTI");
+		else if (opcode == 0x0012)
+			printk("RTX");
+		else if (opcode >= 0x0050 && opcode <= 0x0057)
+			printk("JUMP (P%i)", opcode & 7);
+		else if (opcode >= 0x0060 && opcode <= 0x0067)
+			printk("CALL (P%i)", opcode & 7);
+		else if (opcode >= 0x0070 && opcode <= 0x0077)
+			printk("CALL (PC+P%i)", opcode & 7);
+		else if (opcode >= 0x0080 && opcode <= 0x0087)
+			printk("JUMP (PC+P%i)", opcode & 7);
+		else if ((opcode >= 0x1000 && opcode <= 0x13FF) || (opcode >= 0x1800 && opcode <= 0x1BFF))
+			printk("IF !CC JUMP");
+		else if ((opcode >= 0x1400 && opcode <= 0x17ff) || (opcode >= 0x1c00 && opcode <= 0x1fff))
+			printk("IF CC JUMP");
+		else if (opcode >= 0x2000 && opcode <= 0x2fff)
+			printk("JUMP.S");
+		else if (opcode >= 0xe080 && opcode <= 0xe0ff)
+			printk("LSETUP");
+		else if (opcode >= 0xe200 && opcode <= 0xe2ff)
+			printk("JUMP.L");
+		else if (opcode >= 0xe300 && opcode <= 0xe3ff)
+			printk("CALL pcrel");
+		else
+			printk("0x%04x", opcode);
+	}
+
+}
+
 void dump_bfin_trace_buffer(void)
 {
 #ifdef CONFIG_DEBUG_BFIN_HWTRACE_ON
 	int tflags, i = 0;
 	char buf[150];
+	unsigned short *addr;
 #ifdef CONFIG_DEBUG_BFIN_HWTRACE_EXPAND
 	int j, index;
 #endif
@@ -545,18 +658,25 @@ void dump_bfin_trace_buffer(void)
 
 	printk(KERN_NOTICE "Hardware Trace:\n");
 
+#ifdef CONFIG_DEBUG_BFIN_HWTRACE_EXPAND
+	printk(KERN_NOTICE "WARNING: Expanded trace turned on - can not trace exceptions\n");
+#endif
+
 	if (likely(bfin_read_TBUFSTAT() & TBUFCNT)) {
 		for (; bfin_read_TBUFSTAT() & TBUFCNT; i++) {
 			decode_address(buf, (unsigned long)bfin_read_TBUF());
 			printk(KERN_NOTICE "%4i Target : %s\n", i, buf);
-			decode_address(buf, (unsigned long)bfin_read_TBUF());
-			printk(KERN_NOTICE "     Source : %s\n", buf);
+			addr = (unsigned short *)bfin_read_TBUF();
+			decode_address(buf, (unsigned long)addr);
+			printk(KERN_NOTICE "     Source : %s ", buf);
+			decode_instruction(addr);
+			printk("\n");
 		}
 	}
 
 #ifdef CONFIG_DEBUG_BFIN_HWTRACE_EXPAND
 	if (trace_buff_offset)
-		index = trace_buff_offset/4 - 1;
+		index = trace_buff_offset / 4;
 	else
 		index = EXPAND_LEN;
 
@@ -568,7 +688,9 @@ void dump_bfin_trace_buffer(void)
 		if (index < 0 )
 			index = EXPAND_LEN;
 		decode_address(buf, software_trace_buff[index]);
-		printk(KERN_NOTICE "     Source : %s\n", buf);
+		printk(KERN_NOTICE "     Source : %s ", buf);
+		decode_instruction((unsigned short *)software_trace_buff[index]);
+		printk("\n");
 		index -= 1;
 		if (index < 0)
 			index = EXPAND_LEN;
@@ -582,59 +704,151 @@ void dump_bfin_trace_buffer(void)
 }
 EXPORT_SYMBOL(dump_bfin_trace_buffer);
 
-static void show_trace(struct task_struct *tsk, unsigned long *sp)
+/*
+ * Checks to see if the address pointed to is either a
+ * 16-bit CALL instruction, or a 32-bit CALL instruction
+ */
+bool is_bfin_call(unsigned short *addr)
 {
-	unsigned long addr;
+	unsigned short opcode = 0, *ins_addr;
+	ins_addr = (unsigned short *)addr;
 
-	printk(KERN_NOTICE "\n" KERN_NOTICE "Call Trace:\n");
-
-	while (!kstack_end(sp)) {
-		addr = *sp++;
-		/*
-		 * If the address is either in the text segment of the
-		 * kernel, or in the region which contains vmalloc'ed
-		 * memory, it *may* be the address of a calling
-		 * routine; if so, print it so that someone tracing
-		 * down the cause of the crash will be able to figure
-		 * out the call path that was taken.
-		 */
-		if (kernel_text_address(addr))
-			print_ip_sym(addr);
-	}
+	if (!get_instruction(&opcode, ins_addr))
+		return false;
 
-	printk(KERN_NOTICE "\n");
-}
+	if ((opcode >= 0x0060 && opcode <= 0x0067) ||
+	    (opcode >= 0x0070 && opcode <= 0x0077))
+		return true;
+
+	ins_addr--;
+	if (!get_instruction(&opcode, ins_addr))
+		return false;
+
+	if (opcode >= 0xE300 && opcode <= 0xE3FF)
+		return true;
 
+	return false;
+
+}
 void show_stack(struct task_struct *task, unsigned long *stack)
 {
-	unsigned long *endstack, addr;
-	int i;
+	unsigned int *addr, *endstack, *fp = 0, *frame;
+	unsigned short *ins_addr;
+	char buf[150];
+	unsigned int i, j, ret_addr, frame_no = 0;
 
-	/* Cannot call dump_bfin_trace_buffer() here as show_stack() is
-	 * called externally in some places in the kernel.
+	/*
+	 * If we have been passed a specific stack, use that one otherwise
+	 *    if we have been passed a task structure, use that, otherwise
+	 *    use the stack of where the variable "stack" exists
 	 */
 
-	if (!stack) {
-		if (task)
+	if (stack == NULL) {
+		if (task) {
+			/* We know this is a kernel stack, so this is the start/end */
 			stack = (unsigned long *)task->thread.ksp;
-		else
+			endstack = (unsigned int *)(((unsigned int)(stack) & ~(THREAD_SIZE - 1)) + THREAD_SIZE);
+		} else {
+			/* print out the existing stack info */
 			stack = (unsigned long *)&stack;
+			endstack = (unsigned int *)PAGE_ALIGN((unsigned int)stack);
+		}
+	} else
+		endstack = (unsigned int *)PAGE_ALIGN((unsigned int)stack);
+
+	decode_address(buf, (unsigned int)stack);
+	printk(KERN_NOTICE "Stack info:\n" KERN_NOTICE " SP: [0x%p] %s\n", stack, buf);
+	addr = (unsigned int *)((unsigned int)stack & ~0x3F);
+
+	/* First thing is to look for a frame pointer */
+	for (addr = (unsigned int *)((unsigned int)stack & ~0xF), i = 0;
+		addr < endstack; addr++, i++) {
+		if (*addr & 0x1)
+			continue;
+		ins_addr = (unsigned short *)*addr;
+		ins_addr--;
+		if (is_bfin_call(ins_addr))
+			fp = addr - 1;
+
+		if (fp) {
+			/* Let's check to see if it is a frame pointer */
+			while (fp >= (addr - 1) && fp < endstack && fp)
+				fp = (unsigned int *)*fp;
+			if (fp == 0 || fp == endstack) {
+				fp = addr - 1;
+				break;
+			}
+			fp = 0;
+		}
 	}
+	if (fp) {
+		frame = fp;
+		printk(" FP: (0x%p)\n", fp);
+	} else
+		frame = 0;
 
-	addr = (unsigned long)stack;
-	endstack = (unsigned long *)PAGE_ALIGN(addr);
+	/*
+	 * Now that we think we know where things are, we
+	 * walk the stack again, this time printing things out
+	 * incase there is no frame pointer, we still look for
+	 * valid return addresses
+	 */
 
-	printk(KERN_NOTICE "Stack from %08lx:", (unsigned long)stack);
-	for (i = 0; i < kstack_depth_to_print; i++) {
-		if (stack + 1 > endstack)
-			break;
-		if (i % 8 == 0)
-			printk("\n" KERN_NOTICE "       ");
-		printk(" %08lx", *stack++);
+	/* First time print out data, next time, print out symbols */
+	for (j = 0; j <= 1; j++) {
+		if (j)
+			printk(KERN_NOTICE "Return addresses in stack:\n");
+		else
+			printk(KERN_NOTICE " Memory from 0x%08lx to %p", ((long unsigned int)stack & ~0xF), endstack);
+
+		fp = frame;
+		frame_no = 0;
+
+		for (addr = (unsigned int *)((unsigned int)stack & ~0xF), i = 0;
+		     addr <= endstack; addr++, i++) {
+
+			ret_addr = 0;
+			if (!j && i % 8 == 0)
+				printk("\n" KERN_NOTICE "%p:",addr);
+
+			/* if it is an odd address, or zero, just skip it */
+			if (*addr & 0x1 || !*addr)
+				goto print;
+
+			ins_addr = (unsigned short *)*addr;
+
+			/* Go back one instruction, and see if it is a CALL */
+			ins_addr--;
+			ret_addr = is_bfin_call(ins_addr);
+ print:
+			if (!j && stack == (unsigned long *)addr)
+				printk("[%08x]", *addr);
+			else if (ret_addr)
+				if (j) {
+					decode_address(buf, (unsigned int)*addr);
+					if (frame == addr) {
+						printk(KERN_NOTICE "   frame %2i : %s\n", frame_no, buf);
+						continue;
+					}
+					printk(KERN_NOTICE "    address : %s\n", buf);
+				} else
+					printk("<%08x>", *addr);
+			else if (fp == addr) {
+				if (j)
+					frame = addr+1;
+				else
+					printk("(%08x)", *addr);
+
+				fp = (unsigned int *)*addr;
+				frame_no++;
+
+			} else if (!j)
+				printk(" %08x ", *addr);
+		}
+		if (!j)
+			printk("\n");
 	}
-	printk("\n");
 
-	show_trace(task, stack);
 }
 
 void dump_stack(void)
@@ -715,19 +929,9 @@ void dump_bfin_mem(struct pt_regs *fp)
 		if (!((unsigned long)addr & 0xF))
 			printk("\n" KERN_NOTICE "0x%p: ", addr);
 
-		if (get_user(val, addr)) {
-			if (addr >= (unsigned short *)L1_CODE_START &&
-			    addr < (unsigned short *)(L1_CODE_START + L1_CODE_LENGTH)) {
-				dma_memcpy(&val, addr, sizeof(val));
-				sprintf(buf, "%04x", val);
-			} else if (addr >= (unsigned short *)FIXED_CODE_START &&
-				addr <= (unsigned short *)memory_start) {
-				val = bfin_read16(addr);
-				sprintf(buf, "%04x", val);
-			} else {
+		if (get_instruction(&val, addr)) {
 				val = 0;
 				sprintf(buf, "????");
-			}
 		} else
 			sprintf(buf, "%04x", val);
 
diff --git a/arch/blackfin/kernel/vmlinux.lds.S b/arch/blackfin/kernel/vmlinux.lds.S
index 3ecc64cab3be..7d12c6692a65 100644
--- a/arch/blackfin/kernel/vmlinux.lds.S
+++ b/arch/blackfin/kernel/vmlinux.lds.S
@@ -83,6 +83,7 @@ SECTIONS
 #if !L1_DATA_B_LENGTH
 		*(.l1.bss.B)
 #endif
+		. = ALIGN(4);
 		___bss_stop = .;
 	}
 
@@ -101,6 +102,11 @@ SECTIONS
 #if !L1_DATA_B_LENGTH
 		*(.l1.data.B)
 #endif
+#if !L2_LENGTH
+		. = ALIGN(32);
+		*(.data_l2.cacheline_aligned)
+		*(.l2.data)
+#endif
 
 		DATA_DATA
 		*(.data.*)
@@ -182,14 +188,13 @@ SECTIONS
 		*(.l1.data)
 		__edata_l1 = .;
 
-		. = ALIGN(4);
-		__sbss_l1 = .;
-		*(.l1.bss)
-
 		. = ALIGN(32);
 		*(.data_l1.cacheline_aligned)
 
 		. = ALIGN(4);
+		__sbss_l1 = .;
+		*(.l1.bss)
+		. = ALIGN(4);
 		__ebss_l1 = .;
 	}
 
@@ -203,11 +208,35 @@ SECTIONS
 		. = ALIGN(4);
 		__sbss_b_l1 = .;
 		*(.l1.bss.B)
-
 		. = ALIGN(4);
 		__ebss_b_l1 = .;
 	}
 
+	__l2_lma_start = .;
+
+	.text_data_l2 L2_START : AT(LOADADDR(.data_b_l1) + SIZEOF(.data_b_l1))
+	{
+		. = ALIGN(4);
+		__stext_l2 = .;
+		*(.l2.text)
+		. = ALIGN(4);
+		__etext_l2 = .;
+
+		. = ALIGN(4);
+		__sdata_l2 = .;
+		*(.l2.data)
+		__edata_l2 = .;
+
+		. = ALIGN(32);
+		*(.data_l2.cacheline_aligned)
+
+		. = ALIGN(4);
+		__sbss_l2 = .;
+		*(.l2.bss)
+		. = ALIGN(4);
+		__ebss_l2 = .;
+	}
+
 	/* Force trailing alignment of our init section so that when we
 	 * free our init memory, we don't leave behind a partial page.
 	 */
diff --git a/arch/blackfin/lib/ins.S b/arch/blackfin/lib/ins.S
index eba2343b1b59..d60554dce87b 100644
--- a/arch/blackfin/lib/ins.S
+++ b/arch/blackfin/lib/ins.S
@@ -33,7 +33,28 @@
 
 .align 2
 
+/*
+ * Reads on the Blackfin are speculative. In Blackfin terms, this means they
+ * can be interrupted at any time (even after they have been issued on to the
+ * external bus), and re-issued after the interrupt occurs.
+ *
+ * If a FIFO is sitting on the end of the read, it will see two reads,
+ * when the core only sees one. The FIFO receives the read which is cancelled,
+ * and not delivered to the core.
+ *
+ * To solve this, interrupts are turned off before reads occur to I/O space.
+ * There are 3 versions of all these functions
+ *  - turns interrupts off every read (higher overhead, but lower latency)
+ *  - turns interrupts off every loop (low overhead, but longer latency)
+ *  - DMA version, which do not suffer from this issue. DMA versions have
+ *      different name (prefixed by dma_ ), and are located in
+ *      ../kernel/bfin_dma_5xx.c
+ * Using the dma related functions are recommended for transfering large
+ * buffers in/out of FIFOs.
+ */
+
 ENTRY(_insl)
+#ifdef CONFIG_BFIN_INS_LOWOVERHEAD
 	P0 = R0;	/* P0 = port */
 	cli R3;
 	P1 = R1;	/* P1 = address */
@@ -46,9 +67,26 @@ ENTRY(_insl)
 .Llong_loop_e: 	NOP;
 	sti R3;
 	RTS;
+#else
+	P0 = R0;	/* P0 = port */
+	P1 = R1;	/* P1 = address */
+	P2 = R2;	/* P2 = count */
+	SSYNC;
+	LSETUP( .Llong_loop_s, .Llong_loop_e) LC0 = P2;
+.Llong_loop_s:
+	CLI R3;
+	NOP; NOP; NOP;
+	R0 = [P0];
+	[P1++] = R0;
+.Llong_loop_e:
+	STI R3;
+
+	RTS;
+#endif
 ENDPROC(_insl)
 
 ENTRY(_insw)
+#ifdef CONFIG_BFIN_INS_LOWOVERHEAD
 	P0 = R0;	/* P0 = port */
 	cli R3;
 	P1 = R1;	/* P1 = address */
@@ -61,9 +99,26 @@ ENTRY(_insw)
 .Lword_loop_e: 	NOP;
 	sti R3;
 	RTS;
+#else
+	P0 = R0;	/* P0 = port */
+	P1 = R1;	/* P1 = address */
+	P2 = R2;	/* P2 = count */
+	SSYNC;
+	LSETUP( .Lword_loop_s, .Lword_loop_e) LC0 = P2;
+.Lword_loop_s:
+	CLI R3;
+	NOP; NOP; NOP;
+	R0 = W[P0];
+	W[P1++] = R0;
+.Lword_loop_e:
+	STI R3;
+	RTS;
+
+#endif
 ENDPROC(_insw)
 
 ENTRY(_insw_8)
+#ifdef CONFIG_BFIN_INS_LOWOVERHEAD
 	P0 = R0;	/* P0 = port */
 	cli R3;
 	P1 = R1;	/* P1 = address */
@@ -78,9 +133,29 @@ ENTRY(_insw_8)
 .Lword8_loop_e: NOP;
 	sti R3;
 	RTS;
+#else
+	P0 = R0;	/* P0 = port */
+	P1 = R1;	/* P1 = address */
+	P2 = R2;	/* P2 = count */
+	SSYNC;
+	LSETUP( .Lword8_loop_s, .Lword8_loop_e) LC0 = P2;
+.Lword8_loop_s:
+	CLI R3;
+	NOP; NOP; NOP;
+	R0 = W[P0];
+	B[P1++] = R0;
+	R0 = R0 >> 8;
+	B[P1++] = R0;
+	NOP;
+.Lword8_loop_e:
+	STI R3;
+
+	RTS;
+#endif
 ENDPROC(_insw_8)
 
 ENTRY(_insb)
+#ifdef CONFIG_BFIN_INS_LOWOVERHEAD
 	P0 = R0;	/* P0 = port */
 	cli R3;
 	P1 = R1;	/* P1 = address */
@@ -93,9 +168,26 @@ ENTRY(_insb)
 .Lbyte_loop_e:  NOP;
 	sti R3;
 	RTS;
+#else
+	P0 = R0;        /* P0 = port */
+	P1 = R1;        /* P1 = address */
+	P2 = R2;        /* P2 = count */
+	SSYNC;
+	LSETUP( .Lbyte_loop_s, .Lbyte_loop_e) LC0 = P2;
+.Lbyte_loop_s:
+	CLI R3;
+	NOP; NOP; NOP;
+	R0 = B[P0];
+	B[P1++] = R0;
+.Lbyte_loop_e:
+	STI R3;
+
+	RTS;
+#endif
 ENDPROC(_insb)
 
 ENTRY(_insl_16)
+#ifdef CONFIG_BFIN_INS_LOWOVERHEAD
 	P0 = R0;	/* P0 = port */
 	cli R3;
 	P1 = R1;	/* P1 = address */
@@ -110,4 +202,21 @@ ENTRY(_insl_16)
 .Llong16_loop_e:  NOP;
 	sti R3;
 	RTS;
+#else
+	P0 = R0;	/* P0 = port */
+	P1 = R1;	/* P1 = address */
+	P2 = R2;	/* P2 = count */
+	SSYNC;
+	LSETUP( .Llong16_loop_s, .Llong16_loop_e) LC0 = P2;
+.Llong16_loop_s:
+	CLI R3;
+	NOP; NOP; NOP;
+	R0 = [P0];
+	W[P1++] = R0;
+	R0 = R0 >> 16;
+	W[P1++] = R0;
+.Llong16_loop_e:
+	STI R3;
+	RTS;
+#endif
 ENDPROC(_insl_16)
diff --git a/arch/blackfin/mach-bf527/boards/Kconfig b/arch/blackfin/mach-bf527/boards/Kconfig
index 6a570ad03746..8bf9e58f0148 100644
--- a/arch/blackfin/mach-bf527/boards/Kconfig
+++ b/arch/blackfin/mach-bf527/boards/Kconfig
@@ -9,4 +9,9 @@ config BFIN527_EZKIT
 	help
 	  BF527-EZKIT-LITE board support.
 
+config BFIN527_BLUETECHNIX_CM
+	bool "Bluetechnix CM-BF527"
+	help
+	  CM-BF527 support for EVAL- and DEV-Board.
+
 endchoice
diff --git a/arch/blackfin/mach-bf527/boards/Makefile b/arch/blackfin/mach-bf527/boards/Makefile
index 7277d35ef111..7ba7d256bbb8 100644
--- a/arch/blackfin/mach-bf527/boards/Makefile
+++ b/arch/blackfin/mach-bf527/boards/Makefile
@@ -3,3 +3,4 @@
 #
 
 obj-$(CONFIG_BFIN527_EZKIT)            += ezkit.o
+obj-$(CONFIG_BFIN527_BLUETECHNIX_CM)   += cm_bf527.o
diff --git a/arch/blackfin/mach-bf527/boards/cm_bf527.c b/arch/blackfin/mach-bf527/boards/cm_bf527.c
new file mode 100644
index 000000000000..d22bc7773717
--- /dev/null
+++ b/arch/blackfin/mach-bf527/boards/cm_bf527.c
@@ -0,0 +1,965 @@
+/*
+ * File:         arch/blackfin/mach-bf527/boards/cm-bf527.c
+ * Based on:     arch/blackfin/mach-bf537/boards/stamp.c
+ * Author:       Aidan Williams <aidan@nicta.com.au>
+ *
+ * Created:
+ * Description:
+ *
+ * Modified:
+ *               Copyright 2005 National ICT Australia (NICTA)
+ *               Copyright 2004-2008 Analog Devices Inc.
+ *
+ * Bugs:         Enter bugs at http://blackfin.uclinux.org/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see the file COPYING, or write
+ * to the Free Software Foundation, Inc.,
+ * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ */
+
+#include <linux/device.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/physmap.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/flash.h>
+#include <linux/etherdevice.h>
+#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
+#include <linux/usb/isp1362.h>
+#endif
+#include <linux/i2c.h>
+#include <linux/irq.h>
+#include <linux/interrupt.h>
+#include <linux/usb/sl811.h>
+#if defined(CONFIG_USB_MUSB_HDRC) || defined(CONFIG_USB_MUSB_HDRC_MODULE)
+#include <linux/usb/musb.h>
+#endif
+#include <asm/cplb.h>
+#include <asm/dma.h>
+#include <asm/bfin5xx_spi.h>
+#include <asm/reboot.h>
+#include <asm/nand.h>
+#include <asm/portmux.h>
+#include <asm/dpmc.h>
+#include <linux/spi/ad7877.h>
+
+/*
+ * Name the Board for the /proc/cpuinfo
+ */
+const char bfin_board_name[] = "Bluetechnix CM-BF527";
+
+/*
+ *  Driver needs to know address, irq and flag pin.
+ */
+
+#define ISP1761_BASE       0x203C0000
+#define ISP1761_IRQ        IRQ_PF7
+
+#if defined(CONFIG_USB_ISP1760_HCD) || defined(CONFIG_USB_ISP1760_HCD_MODULE)
+static struct resource bfin_isp1761_resources[] = {
+	[0] = {
+		.name	= "isp1761-regs",
+		.start  = ISP1761_BASE + 0x00000000,
+		.end    = ISP1761_BASE + 0x000fffff,
+		.flags  = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start  = ISP1761_IRQ,
+		.end    = ISP1761_IRQ,
+		.flags  = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device bfin_isp1761_device = {
+	.name           = "isp1761",
+	.id             = 0,
+	.num_resources  = ARRAY_SIZE(bfin_isp1761_resources),
+	.resource       = bfin_isp1761_resources,
+};
+
+static struct platform_device *bfin_isp1761_devices[] = {
+	&bfin_isp1761_device,
+};
+
+int __init bfin_isp1761_init(void)
+{
+	unsigned int num_devices = ARRAY_SIZE(bfin_isp1761_devices);
+
+	printk(KERN_INFO "%s(): registering device resources\n", __func__);
+	set_irq_type(ISP1761_IRQ, IRQF_TRIGGER_FALLING);
+
+	return platform_add_devices(bfin_isp1761_devices, num_devices);
+}
+
+void __exit bfin_isp1761_exit(void)
+{
+	platform_device_unregister(&bfin_isp1761_device);
+}
+
+arch_initcall(bfin_isp1761_init);
+#endif
+
+#if defined(CONFIG_USB_MUSB_HDRC) || defined(CONFIG_USB_MUSB_HDRC_MODULE)
+static struct resource musb_resources[] = {
+	[0] = {
+		.start	= 0xffc03800,
+		.end	= 0xffc03cff,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {	/* general IRQ */
+		.start	= IRQ_USB_INT0,
+		.end	= IRQ_USB_INT0,
+		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
+	},
+	[2] = {	/* DMA IRQ */
+		.start	= IRQ_USB_DMA,
+		.end	= IRQ_USB_DMA,
+		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
+	},
+};
+
+static struct musb_hdrc_platform_data musb_plat = {
+#if defined(CONFIG_USB_MUSB_OTG)
+	.mode		= MUSB_OTG,
+#elif defined(CONFIG_USB_MUSB_HDRC_HCD)
+	.mode		= MUSB_HOST,
+#elif defined(CONFIG_USB_GADGET_MUSB_HDRC)
+	.mode		= MUSB_PERIPHERAL,
+#endif
+	.multipoint	= 0,
+};
+
+static u64 musb_dmamask = ~(u32)0;
+
+static struct platform_device musb_device = {
+	.name		= "musb_hdrc",
+	.id		= 0,
+	.dev = {
+		.dma_mask		= &musb_dmamask,
+		.coherent_dma_mask	= 0xffffffff,
+		.platform_data		= &musb_plat,
+	},
+	.num_resources	= ARRAY_SIZE(musb_resources),
+	.resource	= musb_resources,
+};
+#endif
+
+#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
+static struct mtd_partition ezkit_partitions[] = {
+	{
+		.name       = "bootloader(nor)",
+		.size       = 0x40000,
+		.offset     = 0,
+	}, {
+		.name       = "linux kernel(nor)",
+		.size       = 0x1C0000,
+		.offset     = MTDPART_OFS_APPEND,
+	}, {
+		.name       = "file system(nor)",
+		.size       = MTDPART_SIZ_FULL,
+		.offset     = MTDPART_OFS_APPEND,
+	}
+};
+
+static struct physmap_flash_data ezkit_flash_data = {
+	.width      = 2,
+	.parts      = ezkit_partitions,
+	.nr_parts   = ARRAY_SIZE(ezkit_partitions),
+};
+
+static struct resource ezkit_flash_resource = {
+	.start = 0x20000000,
+	.end   = 0x201fffff,
+	.flags = IORESOURCE_MEM,
+};
+
+static struct platform_device ezkit_flash_device = {
+	.name          = "physmap-flash",
+	.id            = 0,
+	.dev = {
+		.platform_data = &ezkit_flash_data,
+	},
+	.num_resources = 1,
+	.resource      = &ezkit_flash_resource,
+};
+#endif
+
+#if defined(CONFIG_MTD_NAND_BF5XX) || defined(CONFIG_MTD_NAND_BF5XX_MODULE)
+static struct mtd_partition partition_info[] = {
+	{
+		.name = "linux kernel(nand)",
+		.offset = 0,
+		.size = 4 * SIZE_1M,
+	},
+	{
+		.name = "file system(nand)",
+		.offset = MTDPART_OFS_APPEND,
+		.size = MTDPART_SIZ_FULL,
+	},
+};
+
+static struct bf5xx_nand_platform bf5xx_nand_platform = {
+	.page_size = NFC_PG_SIZE_256,
+	.data_width = NFC_NWIDTH_8,
+	.partitions = partition_info,
+	.nr_partitions = ARRAY_SIZE(partition_info),
+	.rd_dly = 3,
+	.wr_dly = 3,
+};
+
+static struct resource bf5xx_nand_resources[] = {
+	{
+		.start = NFC_CTL,
+		.end = NFC_DATA_RD + 2,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = CH_NFC,
+		.end = CH_NFC,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device bf5xx_nand_device = {
+	.name = "bf5xx-nand",
+	.id = 0,
+	.num_resources = ARRAY_SIZE(bf5xx_nand_resources),
+	.resource = bf5xx_nand_resources,
+	.dev = {
+		.platform_data = &bf5xx_nand_platform,
+	},
+};
+#endif
+
+#if defined(CONFIG_BFIN_CFPCMCIA) || defined(CONFIG_BFIN_CFPCMCIA_MODULE)
+static struct resource bfin_pcmcia_cf_resources[] = {
+	{
+		.start = 0x20310000, /* IO PORT */
+		.end = 0x20312000,
+		.flags = IORESOURCE_MEM,
+	}, {
+		.start = 0x20311000, /* Attribute Memory */
+		.end = 0x20311FFF,
+		.flags = IORESOURCE_MEM,
+	}, {
+		.start = IRQ_PF4,
+		.end = IRQ_PF4,
+		.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL,
+	}, {
+		.start = 6, /* Card Detect PF6 */
+		.end = 6,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device bfin_pcmcia_cf_device = {
+	.name = "bfin_cf_pcmcia",
+	.id = -1,
+	.num_resources = ARRAY_SIZE(bfin_pcmcia_cf_resources),
+	.resource = bfin_pcmcia_cf_resources,
+};
+#endif
+
+#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
+static struct platform_device rtc_device = {
+	.name = "rtc-bfin",
+	.id   = -1,
+};
+#endif
+
+#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
+static struct resource smc91x_resources[] = {
+	{
+		.name = "smc91x-regs",
+		.start = 0x20300300,
+		.end = 0x20300300 + 16,
+		.flags = IORESOURCE_MEM,
+	}, {
+
+		.start = IRQ_PF7,
+		.end = IRQ_PF7,
+		.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
+	},
+};
+static struct platform_device smc91x_device = {
+	.name = "smc91x",
+	.id = 0,
+	.num_resources = ARRAY_SIZE(smc91x_resources),
+	.resource = smc91x_resources,
+};
+#endif
+
+#if defined(CONFIG_DM9000) || defined(CONFIG_DM9000_MODULE)
+static struct resource dm9000_resources[] = {
+	[0] = {
+		.start	= 0x203FB800,
+		.end	= 0x203FB800 + 8,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= IRQ_PF9,
+		.end	= IRQ_PF9,
+		.flags	= (IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE),
+	},
+};
+
+static struct platform_device dm9000_device = {
+	.name		= "dm9000",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(dm9000_resources),
+	.resource	= dm9000_resources,
+};
+#endif
+
+#if defined(CONFIG_USB_SL811_HCD) || defined(CONFIG_USB_SL811_HCD_MODULE)
+static struct resource sl811_hcd_resources[] = {
+	{
+		.start = 0x20340000,
+		.end = 0x20340000,
+		.flags = IORESOURCE_MEM,
+	}, {
+		.start = 0x20340004,
+		.end = 0x20340004,
+		.flags = IORESOURCE_MEM,
+	}, {
+		.start = CONFIG_USB_SL811_BFIN_IRQ,
+		.end = CONFIG_USB_SL811_BFIN_IRQ,
+		.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
+	},
+};
+
+#if defined(CONFIG_USB_SL811_BFIN_USE_VBUS)
+void sl811_port_power(struct device *dev, int is_on)
+{
+	gpio_request(CONFIG_USB_SL811_BFIN_GPIO_VBUS, "usb:SL811_VBUS");
+	gpio_direction_output(CONFIG_USB_SL811_BFIN_GPIO_VBUS, is_on);
+}
+#endif
+
+static struct sl811_platform_data sl811_priv = {
+	.potpg = 10,
+	.power = 250,       /* == 500mA */
+#if defined(CONFIG_USB_SL811_BFIN_USE_VBUS)
+	.port_power = &sl811_port_power,
+#endif
+};
+
+static struct platform_device sl811_hcd_device = {
+	.name = "sl811-hcd",
+	.id = 0,
+	.dev = {
+		.platform_data = &sl811_priv,
+	},
+	.num_resources = ARRAY_SIZE(sl811_hcd_resources),
+	.resource = sl811_hcd_resources,
+};
+#endif
+
+#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
+static struct resource isp1362_hcd_resources[] = {
+	{
+		.start = 0x20360000,
+		.end = 0x20360000,
+		.flags = IORESOURCE_MEM,
+	}, {
+		.start = 0x20360004,
+		.end = 0x20360004,
+		.flags = IORESOURCE_MEM,
+	}, {
+		.start = CONFIG_USB_ISP1362_BFIN_GPIO_IRQ,
+		.end = CONFIG_USB_ISP1362_BFIN_GPIO_IRQ,
+		.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
+	},
+};
+
+static struct isp1362_platform_data isp1362_priv = {
+	.sel15Kres = 1,
+	.clknotstop = 0,
+	.oc_enable = 0,
+	.int_act_high = 0,
+	.int_edge_triggered = 0,
+	.remote_wakeup_connected = 0,
+	.no_power_switching = 1,
+	.power_switching_mode = 0,
+};
+
+static struct platform_device isp1362_hcd_device = {
+	.name = "isp1362-hcd",
+	.id = 0,
+	.dev = {
+		.platform_data = &isp1362_priv,
+	},
+	.num_resources = ARRAY_SIZE(isp1362_hcd_resources),
+	.resource = isp1362_hcd_resources,
+};
+#endif
+
+#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
+static struct platform_device bfin_mac_device = {
+	.name = "bfin_mac",
+};
+#endif
+
+#if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE)
+static struct resource net2272_bfin_resources[] = {
+	{
+		.start = 0x20300000,
+		.end = 0x20300000 + 0x100,
+		.flags = IORESOURCE_MEM,
+	}, {
+		.start = IRQ_PF7,
+		.end = IRQ_PF7,
+		.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
+	},
+};
+
+static struct platform_device net2272_bfin_device = {
+	.name = "net2272",
+	.id = -1,
+	.num_resources = ARRAY_SIZE(net2272_bfin_resources),
+	.resource = net2272_bfin_resources,
+};
+#endif
+
+#if defined(CONFIG_MTD_M25P80) \
+	|| defined(CONFIG_MTD_M25P80_MODULE)
+static struct mtd_partition bfin_spi_flash_partitions[] = {
+	{
+		.name = "bootloader(spi)",
+		.size = 0x00040000,
+		.offset = 0,
+		.mask_flags = MTD_CAP_ROM
+	}, {
+		.name = "linux kernel(spi)",
+		.size = MTDPART_SIZ_FULL,
+		.offset = MTDPART_OFS_APPEND,
+	}
+};
+
+static struct flash_platform_data bfin_spi_flash_data = {
+	.name = "m25p80",
+	.parts = bfin_spi_flash_partitions,
+	.nr_parts = ARRAY_SIZE(bfin_spi_flash_partitions),
+	.type = "m25p16",
+};
+
+/* SPI flash chip (m25p64) */
+static struct bfin5xx_spi_chip spi_flash_chip_info = {
+	.enable_dma = 0,         /* use dma transfer with this chip*/
+	.bits_per_word = 8,
+};
+#endif
+
+#if defined(CONFIG_SPI_ADC_BF533) \
+	|| defined(CONFIG_SPI_ADC_BF533_MODULE)
+/* SPI ADC chip */
+static struct bfin5xx_spi_chip spi_adc_chip_info = {
+	.enable_dma = 1,         /* use dma transfer with this chip*/
+	.bits_per_word = 16,
+};
+#endif
+
+#if defined(CONFIG_SND_BLACKFIN_AD1836) \
+	|| defined(CONFIG_SND_BLACKFIN_AD1836_MODULE)
+static struct bfin5xx_spi_chip ad1836_spi_chip_info = {
+	.enable_dma = 0,
+	.bits_per_word = 16,
+};
+#endif
+
+#if defined(CONFIG_AD9960) || defined(CONFIG_AD9960_MODULE)
+static struct bfin5xx_spi_chip ad9960_spi_chip_info = {
+	.enable_dma = 0,
+	.bits_per_word = 16,
+};
+#endif
+
+#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
+static struct bfin5xx_spi_chip spi_mmc_chip_info = {
+	.enable_dma = 1,
+	.bits_per_word = 8,
+};
+#endif
+
+#if defined(CONFIG_PBX)
+static struct bfin5xx_spi_chip spi_si3xxx_chip_info = {
+	.ctl_reg	= 0x4, /* send zero */
+	.enable_dma	= 0,
+	.bits_per_word	= 8,
+	.cs_change_per_word = 1,
+};
+#endif
+
+#if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE)
+static struct bfin5xx_spi_chip spi_ad7877_chip_info = {
+	.enable_dma = 0,
+	.bits_per_word = 16,
+};
+
+static const struct ad7877_platform_data bfin_ad7877_ts_info = {
+	.model			= 7877,
+	.vref_delay_usecs	= 50,	/* internal, no capacitor */
+	.x_plate_ohms		= 419,
+	.y_plate_ohms		= 486,
+	.pressure_max		= 1000,
+	.pressure_min		= 0,
+	.stopacq_polarity 	= 1,
+	.first_conversion_delay = 3,
+	.acquisition_time 	= 1,
+	.averaging 		= 1,
+	.pen_down_acc_interval 	= 1,
+};
+#endif
+
+#if defined(CONFIG_SND_SOC_WM8731) || defined(CONFIG_SND_SOC_WM8731_MODULE) \
+	 && defined(CONFIG_SND_SOC_WM8731_SPI)
+static struct bfin5xx_spi_chip spi_wm8731_chip_info = {
+	.enable_dma = 0,
+	.bits_per_word = 16,
+};
+#endif
+
+#if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE)
+static struct bfin5xx_spi_chip spidev_chip_info = {
+	.enable_dma = 0,
+	.bits_per_word = 8,
+};
+#endif
+
+static struct spi_board_info bfin_spi_board_info[] __initdata = {
+#if defined(CONFIG_MTD_M25P80) \
+	|| defined(CONFIG_MTD_M25P80_MODULE)
+	{
+		/* the modalias must be the same as spi device driver name */
+		.modalias = "m25p80", /* Name of spi_driver for this device */
+		.max_speed_hz = 25000000,     /* max spi clock (SCK) speed in HZ */
+		.bus_num = 0, /* Framework bus number */
+		.chip_select = 1, /* Framework chip select. On STAMP537 it is SPISSEL1*/
+		.platform_data = &bfin_spi_flash_data,
+		.controller_data = &spi_flash_chip_info,
+		.mode = SPI_MODE_3,
+	},
+#endif
+
+#if defined(CONFIG_SPI_ADC_BF533) \
+	|| defined(CONFIG_SPI_ADC_BF533_MODULE)
+	{
+		.modalias = "bfin_spi_adc", /* Name of spi_driver for this device */
+		.max_speed_hz = 6250000,     /* max spi clock (SCK) speed in HZ */
+		.bus_num = 0, /* Framework bus number */
+		.chip_select = 1, /* Framework chip select. */
+		.platform_data = NULL, /* No spi_driver specific config */
+		.controller_data = &spi_adc_chip_info,
+	},
+#endif
+
+#if defined(CONFIG_SND_BLACKFIN_AD1836) \
+	|| defined(CONFIG_SND_BLACKFIN_AD1836_MODULE)
+	{
+		.modalias = "ad1836-spi",
+		.max_speed_hz = 3125000,     /* max spi clock (SCK) speed in HZ */
+		.bus_num = 0,
+		.chip_select = CONFIG_SND_BLACKFIN_SPI_PFBIT,
+		.controller_data = &ad1836_spi_chip_info,
+	},
+#endif
+#if defined(CONFIG_AD9960) || defined(CONFIG_AD9960_MODULE)
+	{
+		.modalias = "ad9960-spi",
+		.max_speed_hz = 10000000,     /* max spi clock (SCK) speed in HZ */
+		.bus_num = 0,
+		.chip_select = 1,
+		.controller_data = &ad9960_spi_chip_info,
+	},
+#endif
+#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
+	{
+		.modalias = "spi_mmc_dummy",
+		.max_speed_hz = 25000000,     /* max spi clock (SCK) speed in HZ */
+		.bus_num = 0,
+		.chip_select = 0,
+		.platform_data = NULL,
+		.controller_data = &spi_mmc_chip_info,
+		.mode = SPI_MODE_3,
+	},
+	{
+		.modalias = "spi_mmc",
+		.max_speed_hz = 25000000,     /* max spi clock (SCK) speed in HZ */
+		.bus_num = 0,
+		.chip_select = CONFIG_SPI_MMC_CS_CHAN,
+		.platform_data = NULL,
+		.controller_data = &spi_mmc_chip_info,
+		.mode = SPI_MODE_3,
+	},
+#endif
+#if defined(CONFIG_PBX)
+	{
+		.modalias = "fxs-spi",
+		.max_speed_hz = 12500000,     /* max spi clock (SCK) speed in HZ */
+		.bus_num = 0,
+		.chip_select = 8 - CONFIG_J11_JUMPER,
+		.controller_data = &spi_si3xxx_chip_info,
+		.mode = SPI_MODE_3,
+	},
+	{
+		.modalias = "fxo-spi",
+		.max_speed_hz = 12500000,     /* max spi clock (SCK) speed in HZ */
+		.bus_num = 0,
+		.chip_select = 8 - CONFIG_J19_JUMPER,
+		.controller_data = &spi_si3xxx_chip_info,
+		.mode = SPI_MODE_3,
+	},
+#endif
+#if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE)
+	{
+		.modalias		= "ad7877",
+		.platform_data		= &bfin_ad7877_ts_info,
+		.irq			= IRQ_PF8,
+		.max_speed_hz	= 12500000,     /* max spi clock (SCK) speed in HZ */
+		.bus_num	= 0,
+		.chip_select  = 2,
+		.controller_data = &spi_ad7877_chip_info,
+	},
+#endif
+#if defined(CONFIG_SND_SOC_WM8731) || defined(CONFIG_SND_SOC_WM8731_MODULE) \
+	 && defined(CONFIG_SND_SOC_WM8731_SPI)
+	{
+		.modalias	= "wm8731",
+		.max_speed_hz	= 3125000,     /* max spi clock (SCK) speed in HZ */
+		.bus_num	= 0,
+		.chip_select    = 5,
+		.controller_data = &spi_wm8731_chip_info,
+		.mode = SPI_MODE_0,
+	},
+#endif
+#if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE)
+	{
+		.modalias = "spidev",
+		.max_speed_hz = 3125000,     /* max spi clock (SCK) speed in HZ */
+		.bus_num = 0,
+		.chip_select = 1,
+		.controller_data = &spidev_chip_info,
+	},
+#endif
+};
+
+#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
+/* SPI controller data */
+static struct bfin5xx_spi_master bfin_spi0_info = {
+	.num_chipselect = 8,
+	.enable_dma = 1,  /* master has the ability to do dma transfer */
+	.pin_req = {P_SPI0_SCK, P_SPI0_MISO, P_SPI0_MOSI, 0},
+};
+
+/* SPI (0) */
+static struct resource bfin_spi0_resource[] = {
+	[0] = {
+		.start = SPI0_REGBASE,
+		.end   = SPI0_REGBASE + 0xFF,
+		.flags = IORESOURCE_MEM,
+		},
+	[1] = {
+		.start = CH_SPI,
+		.end   = CH_SPI,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device bfin_spi0_device = {
+	.name = "bfin-spi",
+	.id = 0, /* Bus number */
+	.num_resources = ARRAY_SIZE(bfin_spi0_resource),
+	.resource = bfin_spi0_resource,
+	.dev = {
+		.platform_data = &bfin_spi0_info, /* Passed to driver */
+	},
+};
+#endif  /* spi master and devices */
+
+#if defined(CONFIG_FB_BFIN_7393) || defined(CONFIG_FB_BFIN_7393_MODULE)
+static struct platform_device bfin_fb_adv7393_device = {
+	.name = "bfin-adv7393",
+};
+#endif
+
+#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
+static struct resource bfin_uart_resources[] = {
+#ifdef CONFIG_SERIAL_BFIN_UART0
+	{
+		.start = 0xFFC00400,
+		.end = 0xFFC004FF,
+		.flags = IORESOURCE_MEM,
+	},
+#endif
+#ifdef CONFIG_SERIAL_BFIN_UART1
+	{
+		.start = 0xFFC02000,
+		.end = 0xFFC020FF,
+		.flags = IORESOURCE_MEM,
+	},
+#endif
+};
+
+static struct platform_device bfin_uart_device = {
+	.name = "bfin-uart",
+	.id = 1,
+	.num_resources = ARRAY_SIZE(bfin_uart_resources),
+	.resource = bfin_uart_resources,
+};
+#endif
+
+#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
+static struct resource bfin_sir_resources[] = {
+#ifdef CONFIG_BFIN_SIR0
+	{
+		.start = 0xFFC00400,
+		.end = 0xFFC004FF,
+		.flags = IORESOURCE_MEM,
+	},
+#endif
+#ifdef CONFIG_BFIN_SIR1
+	{
+		.start = 0xFFC02000,
+		.end = 0xFFC020FF,
+		.flags = IORESOURCE_MEM,
+	},
+#endif
+};
+
+static struct platform_device bfin_sir_device = {
+	.name = "bfin_sir",
+	.id = 0,
+	.num_resources = ARRAY_SIZE(bfin_sir_resources),
+	.resource = bfin_sir_resources,
+};
+#endif
+
+#if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE)
+static struct resource bfin_twi0_resource[] = {
+	[0] = {
+		.start = TWI0_REGBASE,
+		.end   = TWI0_REGBASE,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = IRQ_TWI,
+		.end   = IRQ_TWI,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device i2c_bfin_twi_device = {
+	.name = "i2c-bfin-twi",
+	.id = 0,
+	.num_resources = ARRAY_SIZE(bfin_twi0_resource),
+	.resource = bfin_twi0_resource,
+};
+#endif
+
+#ifdef CONFIG_I2C_BOARDINFO
+static struct i2c_board_info __initdata bfin_i2c_board_info[] = {
+#if defined(CONFIG_TWI_LCD) || defined(CONFIG_TWI_LCD_MODULE)
+	{
+		I2C_BOARD_INFO("pcf8574_lcd", 0x22),
+		.type = "pcf8574_lcd",
+	},
+#endif
+#if defined(CONFIG_TWI_KEYPAD) || defined(CONFIG_TWI_KEYPAD_MODULE)
+	{
+		I2C_BOARD_INFO("pcf8574_keypad", 0x27),
+		.type = "pcf8574_keypad",
+		.irq = IRQ_PF8,
+	},
+#endif
+};
+#endif
+
+#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
+static struct platform_device bfin_sport0_uart_device = {
+	.name = "bfin-sport-uart",
+	.id = 0,
+};
+
+static struct platform_device bfin_sport1_uart_device = {
+	.name = "bfin-sport-uart",
+	.id = 1,
+};
+#endif
+
+#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
+#include <linux/input.h>
+#include <linux/gpio_keys.h>
+
+static struct gpio_keys_button bfin_gpio_keys_table[] = {
+	{BTN_0, GPIO_PF14, 1, "gpio-keys: BTN0"},
+};
+
+static struct gpio_keys_platform_data bfin_gpio_keys_data = {
+	.buttons        = bfin_gpio_keys_table,
+	.nbuttons       = ARRAY_SIZE(bfin_gpio_keys_table),
+};
+
+static struct platform_device bfin_device_gpiokeys = {
+	.name      = "gpio-keys",
+	.dev = {
+		.platform_data = &bfin_gpio_keys_data,
+	},
+};
+#endif
+
+static struct resource bfin_gpios_resources = {
+	.start = 0,
+	.end   = MAX_BLACKFIN_GPIOS - 1,
+	.flags = IORESOURCE_IRQ,
+};
+
+static struct platform_device bfin_gpios_device = {
+	.name = "simple-gpio",
+	.id = -1,
+	.num_resources = 1,
+	.resource = &bfin_gpios_resources,
+};
+
+static const unsigned int cclk_vlev_datasheet[] =
+{
+	VRPAIR(VLEV_100, 400000000),
+	VRPAIR(VLEV_105, 426000000),
+	VRPAIR(VLEV_110, 500000000),
+	VRPAIR(VLEV_115, 533000000),
+	VRPAIR(VLEV_120, 600000000),
+};
+
+static struct bfin_dpmc_platform_data bfin_dmpc_vreg_data = {
+	.tuple_tab = cclk_vlev_datasheet,
+	.tabsize = ARRAY_SIZE(cclk_vlev_datasheet),
+	.vr_settling_time = 25 /* us */,
+};
+
+static struct platform_device bfin_dpmc = {
+	.name = "bfin dpmc",
+	.dev = {
+		.platform_data = &bfin_dmpc_vreg_data,
+	},
+};
+
+static struct platform_device *stamp_devices[] __initdata = {
+
+	&bfin_dpmc,
+
+#if defined(CONFIG_MTD_NAND_BF5XX) || defined(CONFIG_MTD_NAND_BF5XX_MODULE)
+	&bf5xx_nand_device,
+#endif
+
+#if defined(CONFIG_BFIN_CFPCMCIA) || defined(CONFIG_BFIN_CFPCMCIA_MODULE)
+	&bfin_pcmcia_cf_device,
+#endif
+
+#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
+	&rtc_device,
+#endif
+
+#if defined(CONFIG_USB_SL811_HCD) || defined(CONFIG_USB_SL811_HCD_MODULE)
+	&sl811_hcd_device,
+#endif
+
+#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
+	&isp1362_hcd_device,
+#endif
+
+#if defined(CONFIG_USB_MUSB_HDRC) || defined(CONFIG_USB_MUSB_HDRC_MODULE)
+	&musb_device,
+#endif
+
+#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
+	&smc91x_device,
+#endif
+
+#if defined(CONFIG_DM9000) || defined(CONFIG_DM9000_MODULE)
+	&dm9000_device,
+#endif
+
+#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
+	&bfin_mac_device,
+#endif
+
+#if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE)
+	&net2272_bfin_device,
+#endif
+
+#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
+	&bfin_spi0_device,
+#endif
+
+#if defined(CONFIG_FB_BFIN_7393) || defined(CONFIG_FB_BFIN_7393_MODULE)
+	&bfin_fb_adv7393_device,
+#endif
+
+#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
+	&bfin_uart_device,
+#endif
+
+#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
+	&bfin_sir_device,
+#endif
+
+#if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE)
+	&i2c_bfin_twi_device,
+#endif
+
+#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
+	&bfin_sport0_uart_device,
+	&bfin_sport1_uart_device,
+#endif
+
+#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
+	&bfin_device_gpiokeys,
+#endif
+
+#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
+	&ezkit_flash_device,
+#endif
+
+	&bfin_gpios_device,
+};
+
+static int __init stamp_init(void)
+{
+	printk(KERN_INFO "%s(): registering device resources\n", __func__);
+
+#ifdef CONFIG_I2C_BOARDINFO
+	i2c_register_board_info(0, bfin_i2c_board_info,
+				ARRAY_SIZE(bfin_i2c_board_info));
+#endif
+
+	platform_add_devices(stamp_devices, ARRAY_SIZE(stamp_devices));
+	spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info));
+	return 0;
+}
+
+arch_initcall(stamp_init);
+
+void native_machine_restart(char *cmd)
+{
+	/* workaround reboot hang when booting from SPI */
+	if ((bfin_read_SYSCR() & 0x7) == 0x3)
+		bfin_gpio_reset_spi0_ssel1();
+}
+
+void bfin_get_ether_addr(char *addr)
+{
+	random_ether_addr(addr);
+	printk(KERN_WARNING "%s:%s: Setting Ethernet MAC to a random one\n", __FILE__, __func__);
+}
+EXPORT_SYMBOL(bfin_get_ether_addr);
diff --git a/arch/blackfin/mach-bf527/boards/ezkit.c b/arch/blackfin/mach-bf527/boards/ezkit.c
index 689b69c98ee4..762f754c06cc 100644
--- a/arch/blackfin/mach-bf527/boards/ezkit.c
+++ b/arch/blackfin/mach-bf527/boards/ezkit.c
@@ -38,7 +38,6 @@
 #if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
 #include <linux/usb/isp1362.h>
 #endif
-#include <linux/ata_platform.h>
 #include <linux/i2c.h>
 #include <linux/irq.h>
 #include <linux/interrupt.h>
@@ -177,15 +176,15 @@ static struct platform_device bf52x_t350mcqb_device = {
 #if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
 static struct mtd_partition ezkit_partitions[] = {
 	{
-		.name       = "Bootloader",
+		.name       = "bootloader(nor)",
 		.size       = 0x40000,
 		.offset     = 0,
 	}, {
-		.name       = "Kernel",
+		.name       = "linux kernel(nor)",
 		.size       = 0x1C0000,
 		.offset     = MTDPART_OFS_APPEND,
 	}, {
-		.name       = "RootFS",
+		.name       = "file system(nor)",
 		.size       = MTDPART_SIZ_FULL,
 		.offset     = MTDPART_OFS_APPEND,
 	}
@@ -217,12 +216,12 @@ static struct platform_device ezkit_flash_device = {
 #if defined(CONFIG_MTD_NAND_BF5XX) || defined(CONFIG_MTD_NAND_BF5XX_MODULE)
 static struct mtd_partition partition_info[] = {
 	{
-		.name = "Linux Kernel",
+		.name = "linux kernel(nand)",
 		.offset = 0,
 		.size = 4 * SIZE_1M,
 	},
 	{
-		.name = "File System",
+		.name = "file system(nand)",
 		.offset = MTDPART_OFS_APPEND,
 		.size = MTDPART_SIZ_FULL,
 	},
@@ -460,12 +459,12 @@ static struct platform_device net2272_bfin_device = {
 	|| defined(CONFIG_MTD_M25P80_MODULE)
 static struct mtd_partition bfin_spi_flash_partitions[] = {
 	{
-		.name = "bootloader",
+		.name = "bootloader(spi)",
 		.size = 0x00040000,
 		.offset = 0,
 		.mask_flags = MTD_CAP_ROM
 	}, {
-		.name = "linux kernel",
+		.name = "linux kernel(spi)",
 		.size = MTDPART_SIZ_FULL,
 		.offset = MTDPART_OFS_APPEND,
 	}
@@ -825,43 +824,6 @@ static struct platform_device bfin_sport1_uart_device = {
 };
 #endif
 
-#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
-#define PATA_INT	55
-
-static struct pata_platform_info bfin_pata_platform_data = {
-	.ioport_shift = 1,
-	.irq_type = IRQF_TRIGGER_HIGH | IRQF_DISABLED,
-};
-
-static struct resource bfin_pata_resources[] = {
-	{
-		.start = 0x20314020,
-		.end = 0x2031403F,
-		.flags = IORESOURCE_MEM,
-	},
-	{
-		.start = 0x2031401C,
-		.end = 0x2031401F,
-		.flags = IORESOURCE_MEM,
-	},
-	{
-		.start = PATA_INT,
-		.end = PATA_INT,
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device bfin_pata_device = {
-	.name = "pata_platform",
-	.id = -1,
-	.num_resources = ARRAY_SIZE(bfin_pata_resources),
-	.resource = bfin_pata_resources,
-	.dev = {
-		.platform_data = &bfin_pata_platform_data,
-	}
-};
-#endif
-
 #if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
 #include <linux/input.h>
 #include <linux/gpio_keys.h>
@@ -996,10 +958,6 @@ static struct platform_device *stamp_devices[] __initdata = {
 	&bfin_sport1_uart_device,
 #endif
 
-#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
-	&bfin_pata_device,
-#endif
-
 #if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
 	&bfin_device_gpiokeys,
 #endif
@@ -1022,10 +980,6 @@ static int __init stamp_init(void)
 
 	platform_add_devices(stamp_devices, ARRAY_SIZE(stamp_devices));
 	spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info));
-
-#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
-	irq_desc[PATA_INT].status |= IRQ_NOAUTOEN;
-#endif
 	return 0;
 }
 
diff --git a/arch/blackfin/mach-bf527/head.S b/arch/blackfin/mach-bf527/head.S
index 57bdb3ba2fed..28c486191209 100644
--- a/arch/blackfin/mach-bf527/head.S
+++ b/arch/blackfin/mach-bf527/head.S
@@ -30,295 +30,13 @@
 #include <linux/linkage.h>
 #include <linux/init.h>
 #include <asm/blackfin.h>
-#include <asm/trace.h>
-
-#if CONFIG_BFIN_KERNEL_CLOCK
-#include <asm/mach-common/clocks.h>
-#include <asm/mach/mem_init.h>
-#endif
-
-.extern ___bss_stop
-.extern ___bss_start
-.extern _bf53x_relocate_l1_mem
-
-#define INITIAL_STACK	0xFFB01000
-
-__INIT
-
-ENTRY(__start)
-	/* R0: argument of command line string, passed from uboot, save it */
-	R7 = R0;
-	/* Enable Cycle Counter and Nesting Of Interrupts */
-#ifdef CONFIG_BFIN_SCRATCH_REG_CYCLES
-	R0 = SYSCFG_SNEN;
-#else
-	R0 = SYSCFG_SNEN | SYSCFG_CCEN;
-#endif
-	SYSCFG = R0;
-	R0 = 0;
-
-	/* Clear Out All the data and pointer Registers */
-	R1 = R0;
-	R2 = R0;
-	R3 = R0;
-	R4 = R0;
-	R5 = R0;
-	R6 = R0;
-
-	P0 = R0;
-	P1 = R0;
-	P2 = R0;
-	P3 = R0;
-	P4 = R0;
-	P5 = R0;
-
-	LC0 = r0;
-	LC1 = r0;
-	L0 = r0;
-	L1 = r0;
-	L2 = r0;
-	L3 = r0;
-
-	/* Clear Out All the DAG Registers */
-	B0 = r0;
-	B1 = r0;
-	B2 = r0;
-	B3 = r0;
-
-	I0 = r0;
-	I1 = r0;
-	I2 = r0;
-	I3 = r0;
-
-	M0 = r0;
-	M1 = r0;
-	M2 = r0;
-	M3 = r0;
-
-	trace_buffer_init(p0,r0);
-	P0 = R1;
-	R0 = R1;
-
-	/* Turn off the icache */
-	p0.l = LO(IMEM_CONTROL);
-	p0.h = HI(IMEM_CONTROL);
-	R1 = [p0];
-	R0 = ~ENICPLB;
-	R0 = R0 & R1;
-
-	/* Anomaly 05000125 */
-#if ANOMALY_05000125
-	CLI R2;
-	SSYNC;
-#endif
-	[p0] = R0;
-	SSYNC;
-#if ANOMALY_05000125
-	STI R2;
-#endif
-
-	/* Turn off the dcache */
-	p0.l = LO(DMEM_CONTROL);
-	p0.h = HI(DMEM_CONTROL);
-	R1 = [p0];
-	R0 = ~ENDCPLB;
-	R0 = R0 & R1;
-
-	/* Anomaly 05000125 */
-#if ANOMALY_05000125
-	CLI R2;
-	SSYNC;
-#endif
-	[p0] = R0;
-	SSYNC;
-#if ANOMALY_05000125
-	STI R2;
-#endif
-
-
-#if defined(CONFIG_BF527)
-	p0.h = hi(EMAC_SYSTAT);
-	p0.l = lo(EMAC_SYSTAT);
-	R0.h = 0xFFFF; /* Clear EMAC Interrupt Status bits */
-	R0.l = 0xFFFF;
-	[P0] = R0;
-	SSYNC;
-#endif
-
-	/* Initialise UART - when booting from u-boot, the UART is not disabled
-	 * so if we dont initalize here, our serial console gets hosed */
-	p0.h = hi(UART1_LCR);
-	p0.l = lo(UART1_LCR);
-	r0 = 0x0(Z);
-	w[p0] = r0.L;	/* To enable DLL writes */
-	ssync;
-
-	p0.h = hi(UART1_DLL);
-	p0.l = lo(UART1_DLL);
-	r0 = 0x0(Z);
-	w[p0] = r0.L;
-	ssync;
-
-	p0.h = hi(UART1_DLH);
-	p0.l = lo(UART1_DLH);
-	r0 = 0x00(Z);
-	w[p0] = r0.L;
-	ssync;
-
-	p0.h = hi(UART1_GCTL);
-	p0.l = lo(UART1_GCTL);
-	r0 = 0x0(Z);
-	w[p0] = r0.L;	/* To enable UART clock */
-	ssync;
-
-	/* Initialize stack pointer */
-	sp.l = lo(INITIAL_STACK);
-	sp.h = hi(INITIAL_STACK);
-	fp = sp;
-	usp = sp;
-
-#ifdef CONFIG_EARLY_PRINTK
-	SP += -12;
-	call _init_early_exception_vectors;
-	SP += 12;
-#endif
-
-	/* Put The Code for PLL Programming and SDRAM Programming in L1 ISRAM */
-	call _bf53x_relocate_l1_mem;
-#if CONFIG_BFIN_KERNEL_CLOCK
-	call _start_dma_code;
+#ifdef CONFIG_BFIN_KERNEL_CLOCK
+#include <asm/clocks.h>
+#include <mach/mem_init.h>
 #endif
 
-	/* Code for initializing Async memory banks */
-
-	p2.h = hi(EBIU_AMBCTL1);
-	p2.l = lo(EBIU_AMBCTL1);
-	r0.h = hi(AMBCTL1VAL);
-	r0.l = lo(AMBCTL1VAL);
-	[p2] = r0;
-	ssync;
-
-	p2.h = hi(EBIU_AMBCTL0);
-	p2.l = lo(EBIU_AMBCTL0);
-	r0.h = hi(AMBCTL0VAL);
-	r0.l = lo(AMBCTL0VAL);
-	[p2] = r0;
-	ssync;
-
-	p2.h = hi(EBIU_AMGCTL);
-	p2.l = lo(EBIU_AMGCTL);
-	r0 = AMGCTLVAL;
-	w[p2] = r0;
-	ssync;
-
-	/* This section keeps the processor in supervisor mode
-	 * during kernel boot.  Switches to user mode at end of boot.
-	 * See page 3-9 of Hardware Reference manual for documentation.
-	 */
-
-	/* EVT15 = _real_start */
-
-	p0.l = lo(EVT15);
-	p0.h = hi(EVT15);
-	p1.l = _real_start;
-	p1.h = _real_start;
-	[p0] = p1;
-	csync;
-
-	p0.l = lo(IMASK);
-	p0.h = hi(IMASK);
-	p1.l = IMASK_IVG15;
-	p1.h = 0x0;
-	[p0] = p1;
-	csync;
-
-	raise 15;
-	p0.l = .LWAIT_HERE;
-	p0.h = .LWAIT_HERE;
-	reti = p0;
-#if ANOMALY_05000281
-	nop; nop; nop;
-#endif
-	rti;
-
-.LWAIT_HERE:
-	jump .LWAIT_HERE;
-ENDPROC(__start)
-
-ENTRY(_real_start)
-	[ -- sp ] = reti;
-	p0.l = lo(WDOG_CTL);
-	p0.h = hi(WDOG_CTL);
-	r0 = 0xAD6(z);
-	w[p0] = r0;	/* watchdog off for now */
-	ssync;
-
-	/* Code update for BSS size == 0
-	 * Zero out the bss region.
-	 */
-
-	p1.l = ___bss_start;
-	p1.h = ___bss_start;
-	p2.l = ___bss_stop;
-	p2.h = ___bss_stop;
-	r0 = 0;
-	p2 -= p1;
-	lsetup (.L_clear_bss, .L_clear_bss) lc0 = p2;
-.L_clear_bss:
-	B[p1++] = r0;
-
-	/* In case there is a NULL pointer reference
-	 * Zero out region before stext
-	 */
-
-	p1.l = 0x0;
-	p1.h = 0x0;
-	r0.l = __stext;
-	r0.h = __stext;
-	r0 = r0 >> 1;
-	p2 = r0;
-	r0 = 0;
-	lsetup (.L_clear_zero, .L_clear_zero) lc0 = p2;
-.L_clear_zero:
-	W[p1++] = r0;
-
-	/* pass the uboot arguments to the global value command line */
-	R0 = R7;
-	call _cmdline_init;
-
-	p1.l = __rambase;
-	p1.h = __rambase;
-	r0.l = __sdata;
-	r0.h = __sdata;
-	[p1] = r0;
-
-	p1.l = __ramstart;
-	p1.h = __ramstart;
-	p3.l = ___bss_stop;
-	p3.h = ___bss_stop;
-
-	r1 = p3;
-	[p1] = r1;
-
-	/*
-	 * load the current thread pointer and stack
-	 */
-	r1.l = _init_thread_union;
-	r1.h = _init_thread_union;
-
-	r2.l = 0x2000;
-	r2.h = 0x0000;
-	r1 = r1 + r2;
-	sp = r1;
-	usp = sp;
-	fp = sp;
-	jump.l _start_kernel;
-ENDPROC(_real_start)
-
-__FINIT
-
 .section .l1.text
-#if CONFIG_BFIN_KERNEL_CLOCK
+#ifdef CONFIG_BFIN_KERNEL_CLOCK
 ENTRY(_start_dma_code)
 
 	/* Enable PHY CLK buffer output */
@@ -398,12 +116,6 @@ ENTRY(_start_dma_code)
 	w[p0] = r0.l;
 	ssync;
 
-	p0.l = LO(EBIU_SDBCTL);
-	p0.h = HI(EBIU_SDBCTL);     /* SDRAM Memory Bank Control Register */
-	r0 = mem_SDBCTL;
-	w[p0] = r0.l;
-	ssync;
-
 	P2.H = hi(EBIU_SDGCTL);
 	P2.L = lo(EBIU_SDGCTL);
 	R0 = [P2];
@@ -426,13 +138,6 @@ ENTRY(_start_dma_code)
 	[P2] = R1;
 	SSYNC;
 
-	p0.h = hi(SIC_IWR0);
-	p0.l = lo(SIC_IWR0);
-	r0.l = lo(IWR_ENABLE_ALL);
-	r0.h = hi(IWR_ENABLE_ALL);
-	[p0] = r0;
-	SSYNC;
-
 	RTS;
 ENDPROC(_start_dma_code)
 #endif /* CONFIG_BFIN_KERNEL_CLOCK */
diff --git a/include/asm-blackfin/mach-bf527/anomaly.h b/arch/blackfin/mach-bf527/include/mach/anomaly.h
index 4725268a5ada..b7b166f4f064 100644
--- a/include/asm-blackfin/mach-bf527/anomaly.h
+++ b/arch/blackfin/mach-bf527/include/mach/anomaly.h
@@ -23,6 +23,8 @@
 #define ANOMALY_05000245 (1)
 /* Sensitivity To Noise with Slow Input Edge Rates on External SPORT TX and RX Clocks */
 #define ANOMALY_05000265 (1)
+/* New Feature: EMAC TX DMA Word Alignment */
+#define ANOMALY_05000285 (1)
 /* Errors when SSYNC, CSYNC, or Loads to LT, LB and LC Registers Are Interrupted */
 #define ANOMALY_05000312 (1)
 /* Incorrect Access of OTP_STATUS During otp_write() Function */
diff --git a/include/asm-blackfin/mach-bf527/bf527.h b/arch/blackfin/mach-bf527/include/mach/bf527.h
index 056eb4b9cd25..056eb4b9cd25 100644
--- a/include/asm-blackfin/mach-bf527/bf527.h
+++ b/arch/blackfin/mach-bf527/include/mach/bf527.h
diff --git a/include/asm-blackfin/mach-bf527/bfin_serial_5xx.h b/arch/blackfin/mach-bf527/include/mach/bfin_serial_5xx.h
index 2526b6ed6faa..2526b6ed6faa 100644
--- a/include/asm-blackfin/mach-bf527/bfin_serial_5xx.h
+++ b/arch/blackfin/mach-bf527/include/mach/bfin_serial_5xx.h
diff --git a/arch/blackfin/mach-bf527/include/mach/bfin_sir.h b/arch/blackfin/mach-bf527/include/mach/bfin_sir.h
new file mode 100644
index 000000000000..cfd8ad4f1f2c
--- /dev/null
+++ b/arch/blackfin/mach-bf527/include/mach/bfin_sir.h
@@ -0,0 +1,142 @@
+/*
+ * Blackfin Infra-red Driver
+ *
+ * Copyright 2006-2008 Analog Devices Inc.
+ *
+ * Enter bugs at http://blackfin.uclinux.org/
+ *
+ * Licensed under the GPL-2 or later.
+ *
+ */
+
+#include <linux/serial.h>
+#include <asm/dma.h>
+#include <asm/portmux.h>
+
+#define SIR_UART_GET_CHAR(port)   bfin_read16((port)->membase + OFFSET_RBR)
+#define SIR_UART_GET_DLL(port)    bfin_read16((port)->membase + OFFSET_DLL)
+#define SIR_UART_GET_IER(port)    bfin_read16((port)->membase + OFFSET_IER)
+#define SIR_UART_GET_DLH(port)    bfin_read16((port)->membase + OFFSET_DLH)
+#define SIR_UART_GET_IIR(port)    bfin_read16((port)->membase + OFFSET_IIR)
+#define SIR_UART_GET_LCR(port)    bfin_read16((port)->membase + OFFSET_LCR)
+#define SIR_UART_GET_GCTL(port)   bfin_read16((port)->membase + OFFSET_GCTL)
+
+#define SIR_UART_PUT_CHAR(port, v) bfin_write16(((port)->membase + OFFSET_THR), v)
+#define SIR_UART_PUT_DLL(port, v)  bfin_write16(((port)->membase + OFFSET_DLL), v)
+#define SIR_UART_PUT_IER(port, v)  bfin_write16(((port)->membase + OFFSET_IER), v)
+#define SIR_UART_PUT_DLH(port, v)  bfin_write16(((port)->membase + OFFSET_DLH), v)
+#define SIR_UART_PUT_LCR(port, v)  bfin_write16(((port)->membase + OFFSET_LCR), v)
+#define SIR_UART_PUT_GCTL(port, v) bfin_write16(((port)->membase + OFFSET_GCTL), v)
+
+#ifdef CONFIG_SIR_BFIN_DMA
+struct dma_rx_buf {
+	char *buf;
+	int head;
+	int tail;
+	};
+#endif /* CONFIG_SIR_BFIN_DMA */
+
+struct bfin_sir_port {
+	unsigned char __iomem   *membase;
+	unsigned int            irq;
+	unsigned int            lsr;
+	unsigned long           clk;
+	struct net_device       *dev;
+#ifdef CONFIG_SIR_BFIN_DMA
+	int                     tx_done;
+	struct dma_rx_buf       rx_dma_buf;
+	struct timer_list       rx_dma_timer;
+	int                     rx_dma_nrows;
+#endif /* CONFIG_SIR_BFIN_DMA */
+	unsigned int            tx_dma_channel;
+	unsigned int            rx_dma_channel;
+};
+
+struct bfin_sir_port sir_ports[BFIN_UART_NR_PORTS];
+
+struct bfin_sir_port_res {
+	unsigned long   base_addr;
+	int             irq;
+	unsigned int    rx_dma_channel;
+	unsigned int    tx_dma_channel;
+};
+
+struct bfin_sir_port_res bfin_sir_port_resource[] = {
+#ifdef CONFIG_BFIN_SIR0
+	{
+	0xFFC00400,
+	IRQ_UART0_RX,
+	CH_UART0_RX,
+	CH_UART0_TX,
+	},
+#endif
+#ifdef CONFIG_BFIN_SIR1
+	{
+	0xFFC02000,
+	IRQ_UART1_RX,
+	CH_UART1_RX,
+	CH_UART1_TX,
+	},
+#endif
+};
+
+int nr_sirs = ARRAY_SIZE(bfin_sir_port_resource);
+
+struct bfin_sir_self {
+	struct bfin_sir_port    *sir_port;
+	spinlock_t              lock;
+	unsigned int            open;
+	int                     speed;
+	int                     newspeed;
+
+	struct sk_buff          *txskb;
+	struct sk_buff          *rxskb;
+	struct net_device_stats stats;
+	struct device           *dev;
+	struct irlap_cb         *irlap;
+	struct qos_info         qos;
+
+	iobuff_t                tx_buff;
+	iobuff_t                rx_buff;
+
+	struct work_struct      work;
+	int                     mtt;
+};
+
+static inline unsigned int SIR_UART_GET_LSR(struct bfin_sir_port *port)
+{
+	unsigned int lsr = bfin_read16(port->membase + OFFSET_LSR);
+	port->lsr |= (lsr & (BI|FE|PE|OE));
+	return lsr | port->lsr;
+}
+
+static inline void SIR_UART_CLEAR_LSR(struct bfin_sir_port *port)
+{
+	port->lsr = 0;
+	bfin_read16(port->membase + OFFSET_LSR);
+}
+
+#define DRIVER_NAME "bfin_sir"
+
+static int bfin_sir_hw_init(void)
+{
+	int ret = -ENODEV;
+#ifdef CONFIG_BFIN_SIR0
+	ret = peripheral_request(P_UART0_TX, DRIVER_NAME);
+	if (ret)
+		return ret;
+	ret = peripheral_request(P_UART0_RX, DRIVER_NAME);
+	if (ret)
+		return ret;
+#endif
+
+#ifdef CONFIG_BFIN_SIR1
+	ret = peripheral_request(P_UART1_TX, DRIVER_NAME);
+	if (ret)
+		return ret;
+	ret = peripheral_request(P_UART1_RX, DRIVER_NAME);
+	if (ret)
+		return ret;
+#endif
+	return ret;
+}
diff --git a/include/asm-blackfin/mach-bf527/blackfin.h b/arch/blackfin/mach-bf527/include/mach/blackfin.h
index 297821e2d79a..297821e2d79a 100644
--- a/include/asm-blackfin/mach-bf527/blackfin.h
+++ b/arch/blackfin/mach-bf527/include/mach/blackfin.h
diff --git a/include/asm-blackfin/mach-bf527/cdefBF522.h b/arch/blackfin/mach-bf527/include/mach/cdefBF522.h
index 52c06494b886..663c2bbdfd91 100644
--- a/include/asm-blackfin/mach-bf527/cdefBF522.h
+++ b/arch/blackfin/mach-bf527/include/mach/cdefBF522.h
@@ -36,7 +36,7 @@
 #include "defBF522.h"
 
 /* include core specific register pointer definitions */
-#include <asm/mach-common/cdef_LPBlackfin.h>
+#include <asm/cdef_LPBlackfin.h>
 
 /* SYSTEM & MMR ADDRESS DEFINITIONS FOR ADSP-BF522 */
 
diff --git a/include/asm-blackfin/mach-bf527/cdefBF525.h b/arch/blackfin/mach-bf527/include/mach/cdefBF525.h
index 2cc67e4b4d86..00377eb59b75 100644
--- a/include/asm-blackfin/mach-bf527/cdefBF525.h
+++ b/arch/blackfin/mach-bf527/include/mach/cdefBF525.h
@@ -36,7 +36,7 @@
 #include "defBF525.h"
 
 /* include core specific register pointer definitions */
-#include <asm/mach-common/cdef_LPBlackfin.h>
+#include <asm/cdef_LPBlackfin.h>
 
 /* SYSTEM & MMR ADDRESS DEFINITIONS FOR ADSP-BF525 */
 
diff --git a/include/asm-blackfin/mach-bf527/cdefBF527.h b/arch/blackfin/mach-bf527/include/mach/cdefBF527.h
index 5bd1a8601743..fca8db708119 100644
--- a/include/asm-blackfin/mach-bf527/cdefBF527.h
+++ b/arch/blackfin/mach-bf527/include/mach/cdefBF527.h
@@ -36,7 +36,7 @@
 #include "defBF527.h"
 
 /* include core specific register pointer definitions */
-#include <asm/mach-common/cdef_LPBlackfin.h>
+#include <asm/cdef_LPBlackfin.h>
 
 /* SYSTEM & MMR ADDRESS DEFINITIONS FOR ADSP-BF527 */
 
diff --git a/include/asm-blackfin/mach-bf527/cdefBF52x_base.h b/arch/blackfin/mach-bf527/include/mach/cdefBF52x_base.h
index 9dbdbec8ea1b..9a814b9a12b9 100644
--- a/include/asm-blackfin/mach-bf527/cdefBF52x_base.h
+++ b/arch/blackfin/mach-bf527/include/mach/cdefBF52x_base.h
@@ -37,7 +37,7 @@
 #include "defBF52x_base.h"
 
 /* Include core specific register pointer definitions 								*/
-#include <asm/mach-common/cdef_LPBlackfin.h>
+#include <asm/cdef_LPBlackfin.h>
 
 /* ==== begin from cdefBF534.h ==== */
 
diff --git a/include/asm-blackfin/mach-bf527/defBF522.h b/arch/blackfin/mach-bf527/include/mach/defBF522.h
index 9671d8f2c5ef..0a8cdcdf0b49 100644
--- a/include/asm-blackfin/mach-bf527/defBF522.h
+++ b/arch/blackfin/mach-bf527/include/mach/defBF522.h
@@ -32,7 +32,7 @@
 #define _DEF_BF522_H
 
 /* Include all Core registers and bit definitions */
-#include <asm/mach-common/def_LPBlackfin.h>
+#include <asm/def_LPBlackfin.h>
 
 /* SYSTEM & MMR ADDRESS DEFINITIONS FOR ADSP-BF522 */
 
diff --git a/include/asm-blackfin/mach-bf527/defBF525.h b/arch/blackfin/mach-bf527/include/mach/defBF525.h
index 6a375a084acc..5cd7576fef76 100644
--- a/include/asm-blackfin/mach-bf527/defBF525.h
+++ b/arch/blackfin/mach-bf527/include/mach/defBF525.h
@@ -32,7 +32,7 @@
 #define _DEF_BF525_H
 
 /* Include all Core registers and bit definitions */
-#include <asm/mach-common/def_LPBlackfin.h>
+#include <asm/def_LPBlackfin.h>
 
 /* SYSTEM & MMR ADDRESS DEFINITIONS FOR ADSP-BF525 */
 
diff --git a/include/asm-blackfin/mach-bf527/defBF527.h b/arch/blackfin/mach-bf527/include/mach/defBF527.h
index 82134f578f32..f040f364afa3 100644
--- a/include/asm-blackfin/mach-bf527/defBF527.h
+++ b/arch/blackfin/mach-bf527/include/mach/defBF527.h
@@ -32,7 +32,7 @@
 #define _DEF_BF527_H
 
 /* Include all Core registers and bit definitions */
-#include <asm/mach-common/def_LPBlackfin.h>
+#include <asm/def_LPBlackfin.h>
 
 /* SYSTEM & MMR ADDRESS DEFINITIONS FOR ADSP-BF527 */
 
@@ -302,6 +302,7 @@
 #define	PHYIE             0x00000001    /* PHY_INT Interrupt Enable                               */
 #define	RXDWA             0x00000002    /* Receive Frame DMA Word Alignment (Odd/Even*)           */
 #define	RXCKS             0x00000004    /* Enable RX Frame TCP/UDP Checksum Computation           */
+#define	TXDWA             0x00000010    /* Transmit Frame DMA Word Alignment (Odd/Even*)          */
 #define	MDCDIV            0x00003F00    /* SCLK:MDC Clock Divisor [MDC=SCLK/(2*(N+1))]            */
 
 #define	SET_MDCDIV(x) (((x)&0x3F)<< 8)   /* Set MDC Clock Divisor                                 */
diff --git a/include/asm-blackfin/mach-bf527/defBF52x_base.h b/arch/blackfin/mach-bf527/include/mach/defBF52x_base.h
index fc69cf93f149..6ac2ed7026eb 100644
--- a/include/asm-blackfin/mach-bf527/defBF52x_base.h
+++ b/arch/blackfin/mach-bf527/include/mach/defBF52x_base.h
@@ -151,7 +151,7 @@
 #define TIMER7_CONFIG		0xFFC00670	/* Timer 7 Configuration Register  			*/
 #define TIMER7_COUNTER		0xFFC00674	/* Timer 7 Counter Register        			*/
 #define TIMER7_PERIOD		0xFFC00678	/* Timer 7 Period Register         			*/
-#define TIMER7_WIDTH		0xFFC0067C	/* Timer 7 Width Register       			*/   
+#define TIMER7_WIDTH		0xFFC0067C	/* Timer 7 Width Register       			*/
 
 #define TIMER_ENABLE		0xFFC00680	/* Timer Enable Register					*/
 #define TIMER_DISABLE		0xFFC00684	/* Timer Disable Register					*/
@@ -634,18 +634,9 @@
 /* PLL_DIV Macros														*/
 #define SET_SSEL(x)		((x)&0xF)		/* Set SSEL = 0-15 --> SCLK = VCO/SSEL	*/
 
-/* VR_CTL Masks																	*/
-#define	FREQ			0x0003	/* Switching Oscillator Frequency For Regulator	*/
+/* VR_CTL Masks	*/
+#define	FREQ			0x3000	/* Switching Oscillator Frequency For Regulator	*/
 #define	HIBERNATE		0x0000	/* 		Powerdown/Bypass On-Board Regulation	*/
-#define	FREQ_333		0x0001	/* 		Switching Frequency Is 333 kHz			*/
-#define	FREQ_667		0x0002	/* 		Switching Frequency Is 667 kHz			*/
-#define	FREQ_1000		0x0003	/* 		Switching Frequency Is 1 MHz			*/
-
-#define GAIN			0x000C	/* Voltage Level Gain	*/
-#define	GAIN_5			0x0000	/* 		GAIN = 5		*/
-#define	GAIN_10			0x0004	/* 		GAIN = 10		*/
-#define	GAIN_20			0x0008	/* 		GAIN = 20		*/
-#define	GAIN_50			0x000C	/* 		GAIN = 50		*/
 
 #define	VLEV			0x00F0	/* Internal Voltage Level					*/
 #define	VLEV_085 		0x0060	/* 		VLEV = 0.85 V (-5% - +10% Accuracy)	*/
@@ -660,7 +651,7 @@
 #define	VLEV_130		0x00F0	/* 		VLEV = 1.30 V (-5% - +10% Accuracy)	*/
 
 #define	WAKE			0x0100	/* Enable RTC/Reset Wakeup From Hibernate	*/
-#define	CANWE			0x0200	/* Enable CAN Wakeup From Hibernate			*/
+#define	USBWE			0x0200	/* Enable USB Wakeup From Hibernate			*/
 #define	PHYWE			0x0400	/* Enable PHY Wakeup From Hibernate			*/
 #define	CLKBUFOE		0x4000	/* CLKIN Buffer Output Enable */
 #define	PHYCLKOE		CLKBUFOE	/* Alternative legacy name for the above */
@@ -697,16 +688,16 @@
 
 #define IRQ_ERROR1      0x00000002  /* Error Interrupt (DMA, DMARx Block, DMARx Overflow) */
 #define IRQ_ERROR2      0x00000004  /* Error Interrupt (CAN, Ethernet, SPORTx, PPI, SPI, UARTx) */
-#define IRQ_RTC			0x00000008	/* Real Time Clock Interrupt 						*/ 
-#define IRQ_DMA0		0x00000010	/* DMA Channel 0 (PPI) Interrupt 					*/ 
-#define IRQ_DMA3		0x00000020	/* DMA Channel 3 (SPORT0 RX) Interrupt 				*/ 
+#define IRQ_RTC			0x00000008	/* Real Time Clock Interrupt 						*/
+#define IRQ_DMA0		0x00000010	/* DMA Channel 0 (PPI) Interrupt 					*/
+#define IRQ_DMA3		0x00000020	/* DMA Channel 3 (SPORT0 RX) Interrupt 				*/
 #define IRQ_DMA4		0x00000040	/* DMA Channel 4 (SPORT0 TX) Interrupt 				*/
 #define IRQ_DMA5		0x00000080	/* DMA Channel 5 (SPORT1 RX) Interrupt 				*/
 
 #define IRQ_DMA6		0x00000100	/* DMA Channel 6 (SPORT1 TX) Interrupt 		 		*/
 #define IRQ_TWI			0x00000200	/* TWI Interrupt									*/
 #define IRQ_DMA7		0x00000400	/* DMA Channel 7 (SPI) Interrupt 					*/
-#define IRQ_DMA8		0x00000800	/* DMA Channel 8 (UART0 RX) Interrupt 				*/ 
+#define IRQ_DMA8		0x00000800	/* DMA Channel 8 (UART0 RX) Interrupt 				*/
 #define IRQ_DMA9		0x00001000	/* DMA Channel 9 (UART0 TX) Interrupt 				*/
 #define IRQ_DMA10		0x00002000	/* DMA Channel 10 (UART1 RX) Interrupt 				*/
 #define IRQ_DMA11		0x00004000	/* DMA Channel 11 (UART1 TX) Interrupt 				*/
@@ -801,7 +792,7 @@
 #define WDEV_NONE 0x0006 /* no event on roll over */
 #define WDEN 0x0FF0 /* enable watchdog */
 #define WDDIS 0x0AD0 /* disable watchdog */
-#define WDRO 0x8000 /* watchdog rolled over latch */ 
+#define WDRO 0x8000 /* watchdog rolled over latch */
 
 /* depreciated WDOG_CTL Register Masks for legacy code */
 
@@ -882,7 +873,7 @@
 #define NINT		0x01		/* Pending Interrupt					*/
 #define IIR_TX_READY    0x02		/* UART_THR empty                               */
 #define IIR_RX_READY    0x04		/* Receive data ready                           */
-#define IIR_LINE_CHANGE 0x06		/* Receive line status    			*/ 
+#define IIR_LINE_CHANGE 0x06		/* Receive line status    			*/
 #define IIR_STATUS	0x06		/* Highest Priority Pending Interrupt	*/
 
 /* UARTx_GCTL Masks													*/
@@ -1638,12 +1629,12 @@
 
 /* entry addresses of the user-callable Boot ROM functions */
 
-#define _BOOTROM_RESET 0xEF000000 
-#define _BOOTROM_FINAL_INIT 0xEF000002 
+#define _BOOTROM_RESET 0xEF000000
+#define _BOOTROM_FINAL_INIT 0xEF000002
 #define _BOOTROM_DO_MEMORY_DMA 0xEF000006
-#define _BOOTROM_BOOT_DXE_FLASH 0xEF000008 
-#define _BOOTROM_BOOT_DXE_SPI 0xEF00000A 
-#define _BOOTROM_BOOT_DXE_TWI 0xEF00000C 
+#define _BOOTROM_BOOT_DXE_FLASH 0xEF000008
+#define _BOOTROM_BOOT_DXE_SPI 0xEF00000A
+#define _BOOTROM_BOOT_DXE_TWI 0xEF00000C
 #define _BOOTROM_GET_DXE_ADDRESS_FLASH 0xEF000010
 #define _BOOTROM_GET_DXE_ADDRESS_SPI 0xEF000012
 #define _BOOTROM_GET_DXE_ADDRESS_TWI 0xEF000014
@@ -1771,71 +1762,71 @@
 /* Bit masks for CNT_CONFIG */
 
 #define                      CNTE  0x1        /* Counter Enable */
-#define                     nCNTE  0x0       
+#define                     nCNTE  0x0
 #define                      DEBE  0x2        /* Debounce Enable */
-#define                     nDEBE  0x0       
+#define                     nDEBE  0x0
 #define                    CDGINV  0x10       /* CDG Pin Polarity Invert */
-#define                   nCDGINV  0x0       
+#define                   nCDGINV  0x0
 #define                    CUDINV  0x20       /* CUD Pin Polarity Invert */
-#define                   nCUDINV  0x0       
+#define                   nCUDINV  0x0
 #define                    CZMINV  0x40       /* CZM Pin Polarity Invert */
-#define                   nCZMINV  0x0       
+#define                   nCZMINV  0x0
 #define                   CNTMODE  0x700      /* Counter Operating Mode */
 #define                      ZMZC  0x800      /* CZM Zeroes Counter Enable */
-#define                     nZMZC  0x0       
+#define                     nZMZC  0x0
 #define                   BNDMODE  0x3000     /* Boundary register Mode */
 #define                    INPDIS  0x8000     /* CUG and CDG Input Disable */
-#define                   nINPDIS  0x0       
+#define                   nINPDIS  0x0
 
 /* Bit masks for CNT_IMASK */
 
 #define                      ICIE  0x1        /* Illegal Gray/Binary Code Interrupt Enable */
-#define                     nICIE  0x0       
+#define                     nICIE  0x0
 #define                      UCIE  0x2        /* Up count Interrupt Enable */
-#define                     nUCIE  0x0       
+#define                     nUCIE  0x0
 #define                      DCIE  0x4        /* Down count Interrupt Enable */
-#define                     nDCIE  0x0       
+#define                     nDCIE  0x0
 #define                    MINCIE  0x8        /* Min Count Interrupt Enable */
-#define                   nMINCIE  0x0       
+#define                   nMINCIE  0x0
 #define                    MAXCIE  0x10       /* Max Count Interrupt Enable */
-#define                   nMAXCIE  0x0       
+#define                   nMAXCIE  0x0
 #define                   COV31IE  0x20       /* Bit 31 Overflow Interrupt Enable */
-#define                  nCOV31IE  0x0       
+#define                  nCOV31IE  0x0
 #define                   COV15IE  0x40       /* Bit 15 Overflow Interrupt Enable */
-#define                  nCOV15IE  0x0       
+#define                  nCOV15IE  0x0
 #define                   CZEROIE  0x80       /* Count to Zero Interrupt Enable */
-#define                  nCZEROIE  0x0       
+#define                  nCZEROIE  0x0
 #define                     CZMIE  0x100      /* CZM Pin Interrupt Enable */
-#define                    nCZMIE  0x0       
+#define                    nCZMIE  0x0
 #define                    CZMEIE  0x200      /* CZM Error Interrupt Enable */
-#define                   nCZMEIE  0x0       
+#define                   nCZMEIE  0x0
 #define                    CZMZIE  0x400      /* CZM Zeroes Counter Interrupt Enable */
-#define                   nCZMZIE  0x0       
+#define                   nCZMZIE  0x0
 
 /* Bit masks for CNT_STATUS */
 
 #define                      ICII  0x1        /* Illegal Gray/Binary Code Interrupt Identifier */
-#define                     nICII  0x0       
+#define                     nICII  0x0
 #define                      UCII  0x2        /* Up count Interrupt Identifier */
-#define                     nUCII  0x0       
+#define                     nUCII  0x0
 #define                      DCII  0x4        /* Down count Interrupt Identifier */
-#define                     nDCII  0x0       
+#define                     nDCII  0x0
 #define                    MINCII  0x8        /* Min Count Interrupt Identifier */
-#define                   nMINCII  0x0       
+#define                   nMINCII  0x0
 #define                    MAXCII  0x10       /* Max Count Interrupt Identifier */
-#define                   nMAXCII  0x0       
+#define                   nMAXCII  0x0
 #define                   COV31II  0x20       /* Bit 31 Overflow Interrupt Identifier */
-#define                  nCOV31II  0x0       
+#define                  nCOV31II  0x0
 #define                   COV15II  0x40       /* Bit 15 Overflow Interrupt Identifier */
-#define                  nCOV15II  0x0       
+#define                  nCOV15II  0x0
 #define                   CZEROII  0x80       /* Count to Zero Interrupt Identifier */
-#define                  nCZEROII  0x0       
+#define                  nCZEROII  0x0
 #define                     CZMII  0x100      /* CZM Pin Interrupt Identifier */
-#define                    nCZMII  0x0       
+#define                    nCZMII  0x0
 #define                    CZMEII  0x200      /* CZM Error Interrupt Identifier */
-#define                   nCZMEII  0x0       
+#define                   nCZMEII  0x0
 #define                    CZMZII  0x400      /* CZM Zeroes Counter Interrupt Identifier */
-#define                   nCZMZII  0x0       
+#define                   nCZMZII  0x0
 
 /* Bit masks for CNT_COMMAND */
 
@@ -1843,7 +1834,7 @@
 #define                    W1LMIN  0xf0       /* Load Min Register */
 #define                    W1LMAX  0xf00      /* Load Max Register */
 #define                  W1ZMONCE  0x1000     /* Enable CZM Clear Counter Once */
-#define                 nW1ZMONCE  0x0       
+#define                 nW1ZMONCE  0x0
 
 /* Bit masks for CNT_DEBOUNCE */
 
@@ -1853,15 +1844,15 @@
 
 #define                FUSE_FADDR  0x1ff      /* OTP/Fuse Address */
 #define                      FIEN  0x800      /* OTP/Fuse Interrupt Enable */
-#define                     nFIEN  0x0       
+#define                     nFIEN  0x0
 #define                  FTESTDEC  0x1000     /* OTP/Fuse Test Decoder */
-#define                 nFTESTDEC  0x0       
+#define                 nFTESTDEC  0x0
 #define                   FWRTEST  0x2000     /* OTP/Fuse Write Test */
-#define                  nFWRTEST  0x0       
+#define                  nFWRTEST  0x0
 #define                     FRDEN  0x4000     /* OTP/Fuse Read Enable */
-#define                    nFRDEN  0x0       
+#define                    nFRDEN  0x0
 #define                     FWREN  0x8000     /* OTP/Fuse Write Enable */
-#define                    nFWREN  0x0       
+#define                    nFWREN  0x0
 
 /* Bit masks for OTP_BEN */
 
@@ -1870,15 +1861,15 @@
 /* Bit masks for OTP_STATUS */
 
 #define                     FCOMP  0x1        /* OTP/Fuse Access Complete */
-#define                    nFCOMP  0x0       
+#define                    nFCOMP  0x0
 #define                    FERROR  0x2        /* OTP/Fuse Access Error */
-#define                   nFERROR  0x0       
+#define                   nFERROR  0x0
 #define                  MMRGLOAD  0x10       /* Memory Mapped Register Gasket Load */
-#define                 nMMRGLOAD  0x0       
+#define                 nMMRGLOAD  0x0
 #define                  MMRGLOCK  0x20       /* Memory Mapped Register Gasket Lock */
-#define                 nMMRGLOCK  0x0       
+#define                 nMMRGLOCK  0x0
 #define                    FPGMEN  0x40       /* OTP/Fuse Program Enable */
-#define                   nFPGMEN  0x0       
+#define                   nFPGMEN  0x0
 
 /* Bit masks for OTP_TIMING */
 
@@ -1892,42 +1883,42 @@
 /* Bit masks for SECURE_SYSSWT */
 
 #define                   EMUDABL  0x1        /* Emulation Disable. */
-#define                  nEMUDABL  0x0       
+#define                  nEMUDABL  0x0
 #define                   RSTDABL  0x2        /* Reset Disable */
-#define                  nRSTDABL  0x0       
+#define                  nRSTDABL  0x0
 #define                   L1IDABL  0x1c       /* L1 Instruction Memory Disable. */
 #define                  L1DADABL  0xe0       /* L1 Data Bank A Memory Disable. */
 #define                  L1DBDABL  0x700      /* L1 Data Bank B Memory Disable. */
 #define                   DMA0OVR  0x800      /* DMA0 Memory Access Override */
-#define                  nDMA0OVR  0x0       
+#define                  nDMA0OVR  0x0
 #define                   DMA1OVR  0x1000     /* DMA1 Memory Access Override */
-#define                  nDMA1OVR  0x0       
+#define                  nDMA1OVR  0x0
 #define                    EMUOVR  0x4000     /* Emulation Override */
-#define                   nEMUOVR  0x0       
+#define                   nEMUOVR  0x0
 #define                    OTPSEN  0x8000     /* OTP Secrets Enable. */
-#define                   nOTPSEN  0x0       
+#define                   nOTPSEN  0x0
 #define                    L2DABL  0x70000    /* L2 Memory Disable. */
 
 /* Bit masks for SECURE_CONTROL */
 
 #define                   SECURE0  0x1        /* SECURE 0 */
-#define                  nSECURE0  0x0       
+#define                  nSECURE0  0x0
 #define                   SECURE1  0x2        /* SECURE 1 */
-#define                  nSECURE1  0x0       
+#define                  nSECURE1  0x0
 #define                   SECURE2  0x4        /* SECURE 2 */
-#define                  nSECURE2  0x0       
+#define                  nSECURE2  0x0
 #define                   SECURE3  0x8        /* SECURE 3 */
-#define                  nSECURE3  0x0       
+#define                  nSECURE3  0x0
 
 /* Bit masks for SECURE_STATUS */
 
 #define                   SECMODE  0x3        /* Secured Mode Control State */
 #define                       NMI  0x4        /* Non Maskable Interrupt */
-#define                      nNMI  0x0       
+#define                      nNMI  0x0
 #define                   AFVALID  0x8        /* Authentication Firmware Valid */
-#define                  nAFVALID  0x0       
+#define                  nAFVALID  0x0
 #define                    AFEXIT  0x10       /* Authentication Firmware Exit */
-#define                   nAFEXIT  0x0       
+#define                   nAFEXIT  0x0
 #define                   SECSTAT  0xe0       /* Secure Status */
 
 /* Bit masks for NFC_CTL */
@@ -1935,60 +1926,60 @@
 #define                    WR_DLY  0xf        /* Write Strobe Delay */
 #define                    RD_DLY  0xf0       /* Read Strobe Delay */
 #define                    NWIDTH  0x100      /* NAND Data Width */
-#define                   nNWIDTH  0x0       
+#define                   nNWIDTH  0x0
 #define                   PG_SIZE  0x200      /* Page Size */
-#define                  nPG_SIZE  0x0       
+#define                  nPG_SIZE  0x0
 
 /* Bit masks for NFC_STAT */
 
 #define                     NBUSY  0x1        /* Not Busy */
-#define                    nNBUSY  0x0       
+#define                    nNBUSY  0x0
 #define                   WB_FULL  0x2        /* Write Buffer Full */
-#define                  nWB_FULL  0x0       
+#define                  nWB_FULL  0x0
 #define                PG_WR_STAT  0x4        /* Page Write Pending */
-#define               nPG_WR_STAT  0x0       
+#define               nPG_WR_STAT  0x0
 #define                PG_RD_STAT  0x8        /* Page Read Pending */
-#define               nPG_RD_STAT  0x0       
+#define               nPG_RD_STAT  0x0
 #define                  WB_EMPTY  0x10       /* Write Buffer Empty */
-#define                 nWB_EMPTY  0x0       
+#define                 nWB_EMPTY  0x0
 
 /* Bit masks for NFC_IRQSTAT */
 
 #define                  NBUSYIRQ  0x1        /* Not Busy IRQ */
-#define                 nNBUSYIRQ  0x0       
+#define                 nNBUSYIRQ  0x0
 #define                    WB_OVF  0x2        /* Write Buffer Overflow */
-#define                   nWB_OVF  0x0       
+#define                   nWB_OVF  0x0
 #define                   WB_EDGE  0x4        /* Write Buffer Edge Detect */
-#define                  nWB_EDGE  0x0       
+#define                  nWB_EDGE  0x0
 #define                    RD_RDY  0x8        /* Read Data Ready */
-#define                   nRD_RDY  0x0       
+#define                   nRD_RDY  0x0
 #define                   WR_DONE  0x10       /* Page Write Done */
-#define                  nWR_DONE  0x0       
+#define                  nWR_DONE  0x0
 
 /* Bit masks for NFC_IRQMASK */
 
 #define              MASK_BUSYIRQ  0x1        /* Mask Not Busy IRQ */
-#define             nMASK_BUSYIRQ  0x0       
+#define             nMASK_BUSYIRQ  0x0
 #define                MASK_WBOVF  0x2        /* Mask Write Buffer Overflow */
-#define               nMASK_WBOVF  0x0       
+#define               nMASK_WBOVF  0x0
 #define              MASK_WBEMPTY  0x4        /* Mask Write Buffer Empty */
-#define             nMASK_WBEMPTY  0x0       
+#define             nMASK_WBEMPTY  0x0
 #define                MASK_RDRDY  0x8        /* Mask Read Data Ready */
-#define               nMASK_RDRDY  0x0       
+#define               nMASK_RDRDY  0x0
 #define               MASK_WRDONE  0x10       /* Mask Write Done */
-#define              nMASK_WRDONE  0x0       
+#define              nMASK_WRDONE  0x0
 
 /* Bit masks for NFC_RST */
 
 #define                   ECC_RST  0x1        /* ECC (and NFC counters) Reset */
-#define                  nECC_RST  0x0       
+#define                  nECC_RST  0x0
 
 /* Bit masks for NFC_PGCTL */
 
 #define               PG_RD_START  0x1        /* Page Read Start */
-#define              nPG_RD_START  0x0       
+#define              nPG_RD_START  0x0
 #define               PG_WR_START  0x2        /* Page Write Start */
-#define              nPG_WR_START  0x0       
+#define              nPG_WR_START  0x0
 
 /* Bit masks for NFC_ECC0 */
 
diff --git a/include/asm-blackfin/mach-bf527/dma.h b/arch/blackfin/mach-bf527/include/mach/dma.h
index 49dd693223e8..49dd693223e8 100644
--- a/include/asm-blackfin/mach-bf527/dma.h
+++ b/arch/blackfin/mach-bf527/include/mach/dma.h
diff --git a/include/asm-blackfin/mach-bf527/irq.h b/arch/blackfin/mach-bf527/include/mach/irq.h
index 4e2b3f2020e5..4e2b3f2020e5 100644
--- a/include/asm-blackfin/mach-bf527/irq.h
+++ b/arch/blackfin/mach-bf527/include/mach/irq.h
diff --git a/arch/blackfin/mach-bf527/include/mach/mem_init.h b/arch/blackfin/mach-bf527/include/mach/mem_init.h
new file mode 100644
index 000000000000..cbe03f4a5698
--- /dev/null
+++ b/arch/blackfin/mach-bf527/include/mach/mem_init.h
@@ -0,0 +1,310 @@
+/*
+ * File:         include/asm-blackfin/mach-bf527/mem_init.h
+ * Based on:
+ * Author:
+ *
+ * Created:
+ * Description:
+ *
+ * Rev:
+ *
+ * Modified:
+ *               Copyright 2004-2007 Analog Devices Inc.
+ *
+ * Bugs:         Enter bugs at http://blackfin.uclinux.org/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; see the file COPYING.
+ * If not, write to the Free Software Foundation,
+ * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ */
+
+#if (CONFIG_MEM_MT48LC16M16A2TG_75 || CONFIG_MEM_MT48LC64M4A2FB_7E || CONFIG_MEM_MT48LC16M8A2TG_75 || CONFIG_MEM_GENERIC_BOARD || CONFIG_MEM_MT48LC32M8A2_75 || CONFIG_MEM_MT48LC32M16A2TG_75)
+#if (CONFIG_SCLK_HZ > 119402985)
+#define SDRAM_tRP       TRP_2
+#define SDRAM_tRP_num   2
+#define SDRAM_tRAS      TRAS_7
+#define SDRAM_tRAS_num  7
+#define SDRAM_tRCD      TRCD_2
+#define SDRAM_tWR       TWR_2
+#endif
+#if (CONFIG_SCLK_HZ > 104477612) && (CONFIG_SCLK_HZ <= 119402985)
+#define SDRAM_tRP       TRP_2
+#define SDRAM_tRP_num   2
+#define SDRAM_tRAS      TRAS_6
+#define SDRAM_tRAS_num  6
+#define SDRAM_tRCD      TRCD_2
+#define SDRAM_tWR       TWR_2
+#endif
+#if (CONFIG_SCLK_HZ > 89552239) && (CONFIG_SCLK_HZ <= 104477612)
+#define SDRAM_tRP       TRP_2
+#define SDRAM_tRP_num   2
+#define SDRAM_tRAS      TRAS_5
+#define SDRAM_tRAS_num  5
+#define SDRAM_tRCD      TRCD_2
+#define SDRAM_tWR       TWR_2
+#endif
+#if (CONFIG_SCLK_HZ > 74626866) && (CONFIG_SCLK_HZ <= 89552239)
+#define SDRAM_tRP       TRP_2
+#define SDRAM_tRP_num   2
+#define SDRAM_tRAS      TRAS_4
+#define SDRAM_tRAS_num  4
+#define SDRAM_tRCD      TRCD_2
+#define SDRAM_tWR       TWR_2
+#endif
+#if (CONFIG_SCLK_HZ > 66666667) && (CONFIG_SCLK_HZ <= 74626866)
+#define SDRAM_tRP       TRP_2
+#define SDRAM_tRP_num   2
+#define SDRAM_tRAS      TRAS_3
+#define SDRAM_tRAS_num  3
+#define SDRAM_tRCD      TRCD_2
+#define SDRAM_tWR       TWR_2
+#endif
+#if (CONFIG_SCLK_HZ > 59701493) && (CONFIG_SCLK_HZ <= 66666667)
+#define SDRAM_tRP       TRP_1
+#define SDRAM_tRP_num   1
+#define SDRAM_tRAS      TRAS_4
+#define SDRAM_tRAS_num  3
+#define SDRAM_tRCD      TRCD_1
+#define SDRAM_tWR       TWR_2
+#endif
+#if (CONFIG_SCLK_HZ > 44776119) && (CONFIG_SCLK_HZ <= 59701493)
+#define SDRAM_tRP       TRP_1
+#define SDRAM_tRP_num   1
+#define SDRAM_tRAS      TRAS_3
+#define SDRAM_tRAS_num  3
+#define SDRAM_tRCD      TRCD_1
+#define SDRAM_tWR       TWR_2
+#endif
+#if (CONFIG_SCLK_HZ > 29850746) && (CONFIG_SCLK_HZ <= 44776119)
+#define SDRAM_tRP       TRP_1
+#define SDRAM_tRP_num   1
+#define SDRAM_tRAS      TRAS_2
+#define SDRAM_tRAS_num  2
+#define SDRAM_tRCD      TRCD_1
+#define SDRAM_tWR       TWR_2
+#endif
+#if (CONFIG_SCLK_HZ <= 29850746)
+#define SDRAM_tRP       TRP_1
+#define SDRAM_tRP_num   1
+#define SDRAM_tRAS      TRAS_1
+#define SDRAM_tRAS_num  1
+#define SDRAM_tRCD      TRCD_1
+#define SDRAM_tWR       TWR_2
+#endif
+#endif
+
+#if (CONFIG_MEM_MT48LC16M16A2TG_75)
+  /*SDRAM INFORMATION: */
+#define SDRAM_Tref  64		/* Refresh period in milliseconds   */
+#define SDRAM_NRA   8192	/* Number of row addresses in SDRAM */
+#define SDRAM_CL    CL_3
+#endif
+
+#if (CONFIG_MEM_MT48LC16M8A2TG_75)
+  /*SDRAM INFORMATION: */
+#define SDRAM_Tref  64		/* Refresh period in milliseconds   */
+#define SDRAM_NRA   4096	/* Number of row addresses in SDRAM */
+#define SDRAM_CL    CL_3
+#endif
+
+#if (CONFIG_MEM_MT48LC32M8A2_75)
+  /*SDRAM INFORMATION: */
+#define SDRAM_Tref  64		/* Refresh period in milliseconds   */
+#define SDRAM_NRA   8192	/* Number of row addresses in SDRAM */
+#define SDRAM_CL    CL_3
+#endif
+
+#if (CONFIG_MEM_MT48LC64M4A2FB_7E)
+  /*SDRAM INFORMATION: */
+#define SDRAM_Tref  64		/* Refresh period in milliseconds   */
+#define SDRAM_NRA   8192	/* Number of row addresses in SDRAM */
+#define SDRAM_CL    CL_3
+#endif
+
+#if (CONFIG_MEM_GENERIC_BOARD)
+  /*SDRAM INFORMATION: Modify this for your board */
+#define SDRAM_Tref  64		/* Refresh period in milliseconds   */
+#define SDRAM_NRA   8192	/* Number of row addresses in SDRAM */
+#define SDRAM_CL    CL_3
+#endif
+
+#if (CONFIG_MEM_MT48LC32M16A2TG_75)
+  /*SDRAM INFORMATION: */
+#define SDRAM_Tref  64		/* Refresh period in milliseconds   */
+#define SDRAM_NRA   8192	/* Number of row addresses in SDRAM */
+#define SDRAM_CL    CL_3
+#endif
+
+/* Equation from section 17 (p17-46) of BF533 HRM */
+#define mem_SDRRC       (((CONFIG_SCLK_HZ / 1000) * SDRAM_Tref) / SDRAM_NRA) - (SDRAM_tRAS_num + SDRAM_tRP_num)
+
+/* Enable SCLK Out */
+#define mem_SDGCTL        (SCTLE | SDRAM_CL | SDRAM_tRAS | SDRAM_tRP | SDRAM_tRCD | SDRAM_tWR | PSS)
+
+#if defined CONFIG_CLKIN_HALF
+#define CLKIN_HALF       1
+#else
+#define CLKIN_HALF       0
+#endif
+
+#if defined CONFIG_PLL_BYPASS
+#define PLL_BYPASS      1
+#else
+#define PLL_BYPASS       0
+#endif
+
+/***************************************Currently Not Being Used *********************************/
+#define flash_EBIU_AMBCTL_WAT  ((CONFIG_FLASH_SPEED_BWAT * 4) / (4000000000 / CONFIG_SCLK_HZ)) + 1
+#define flash_EBIU_AMBCTL_RAT  ((CONFIG_FLASH_SPEED_BRAT * 4) / (4000000000 / CONFIG_SCLK_HZ)) + 1
+#define flash_EBIU_AMBCTL_HT   ((CONFIG_FLASH_SPEED_BHT  * 4) / (4000000000 / CONFIG_SCLK_HZ))
+#define flash_EBIU_AMBCTL_ST   ((CONFIG_FLASH_SPEED_BST  * 4) / (4000000000 / CONFIG_SCLK_HZ)) + 1
+#define flash_EBIU_AMBCTL_TT   ((CONFIG_FLASH_SPEED_BTT  * 4) / (4000000000 / CONFIG_SCLK_HZ)) + 1
+
+#if (flash_EBIU_AMBCTL_TT > 3)
+#define flash_EBIU_AMBCTL0_TT   B0TT_4
+#endif
+#if (flash_EBIU_AMBCTL_TT == 3)
+#define flash_EBIU_AMBCTL0_TT   B0TT_3
+#endif
+#if (flash_EBIU_AMBCTL_TT == 2)
+#define flash_EBIU_AMBCTL0_TT   B0TT_2
+#endif
+#if (flash_EBIU_AMBCTL_TT < 2)
+#define flash_EBIU_AMBCTL0_TT   B0TT_1
+#endif
+
+#if (flash_EBIU_AMBCTL_ST > 3)
+#define flash_EBIU_AMBCTL0_ST   B0ST_4
+#endif
+#if (flash_EBIU_AMBCTL_ST == 3)
+#define flash_EBIU_AMBCTL0_ST   B0ST_3
+#endif
+#if (flash_EBIU_AMBCTL_ST == 2)
+#define flash_EBIU_AMBCTL0_ST   B0ST_2
+#endif
+#if (flash_EBIU_AMBCTL_ST < 2)
+#define flash_EBIU_AMBCTL0_ST   B0ST_1
+#endif
+
+#if (flash_EBIU_AMBCTL_HT > 2)
+#define flash_EBIU_AMBCTL0_HT   B0HT_3
+#endif
+#if (flash_EBIU_AMBCTL_HT == 2)
+#define flash_EBIU_AMBCTL0_HT   B0HT_2
+#endif
+#if (flash_EBIU_AMBCTL_HT == 1)
+#define flash_EBIU_AMBCTL0_HT   B0HT_1
+#endif
+#if (flash_EBIU_AMBCTL_HT == 0 && CONFIG_FLASH_SPEED_BHT == 0)
+#define flash_EBIU_AMBCTL0_HT   B0HT_0
+#endif
+#if (flash_EBIU_AMBCTL_HT == 0 && CONFIG_FLASH_SPEED_BHT != 0)
+#define flash_EBIU_AMBCTL0_HT   B0HT_1
+#endif
+
+#if (flash_EBIU_AMBCTL_WAT > 14)
+#define flash_EBIU_AMBCTL0_WAT  B0WAT_15
+#endif
+#if (flash_EBIU_AMBCTL_WAT == 14)
+#define flash_EBIU_AMBCTL0_WAT  B0WAT_14
+#endif
+#if (flash_EBIU_AMBCTL_WAT == 13)
+#define flash_EBIU_AMBCTL0_WAT  B0WAT_13
+#endif
+#if (flash_EBIU_AMBCTL_WAT == 12)
+#define flash_EBIU_AMBCTL0_WAT  B0WAT_12
+#endif
+#if (flash_EBIU_AMBCTL_WAT == 11)
+#define flash_EBIU_AMBCTL0_WAT  B0WAT_11
+#endif
+#if (flash_EBIU_AMBCTL_WAT == 10)
+#define flash_EBIU_AMBCTL0_WAT  B0WAT_10
+#endif
+#if (flash_EBIU_AMBCTL_WAT == 9)
+#define flash_EBIU_AMBCTL0_WAT  B0WAT_9
+#endif
+#if (flash_EBIU_AMBCTL_WAT == 8)
+#define flash_EBIU_AMBCTL0_WAT  B0WAT_8
+#endif
+#if (flash_EBIU_AMBCTL_WAT == 7)
+#define flash_EBIU_AMBCTL0_WAT  B0WAT_7
+#endif
+#if (flash_EBIU_AMBCTL_WAT == 6)
+#define flash_EBIU_AMBCTL0_WAT  B0WAT_6
+#endif
+#if (flash_EBIU_AMBCTL_WAT == 5)
+#define flash_EBIU_AMBCTL0_WAT  B0WAT_5
+#endif
+#if (flash_EBIU_AMBCTL_WAT == 4)
+#define flash_EBIU_AMBCTL0_WAT  B0WAT_4
+#endif
+#if (flash_EBIU_AMBCTL_WAT == 3)
+#define flash_EBIU_AMBCTL0_WAT  B0WAT_3
+#endif
+#if (flash_EBIU_AMBCTL_WAT == 2)
+#define flash_EBIU_AMBCTL0_WAT  B0WAT_2
+#endif
+#if (flash_EBIU_AMBCTL_WAT == 1)
+#define flash_EBIU_AMBCTL0_WAT  B0WAT_1
+#endif
+
+#if (flash_EBIU_AMBCTL_RAT > 14)
+#define flash_EBIU_AMBCTL0_RAT  B0RAT_15
+#endif
+#if (flash_EBIU_AMBCTL_RAT == 14)
+#define flash_EBIU_AMBCTL0_RAT  B0RAT_14
+#endif
+#if (flash_EBIU_AMBCTL_RAT == 13)
+#define flash_EBIU_AMBCTL0_RAT  B0RAT_13
+#endif
+#if (flash_EBIU_AMBCTL_RAT == 12)
+#define flash_EBIU_AMBCTL0_RAT  B0RAT_12
+#endif
+#if (flash_EBIU_AMBCTL_RAT == 11)
+#define flash_EBIU_AMBCTL0_RAT  B0RAT_11
+#endif
+#if (flash_EBIU_AMBCTL_RAT == 10)
+#define flash_EBIU_AMBCTL0_RAT  B0RAT_10
+#endif
+#if (flash_EBIU_AMBCTL_RAT == 9)
+#define flash_EBIU_AMBCTL0_RAT  B0RAT_9
+#endif
+#if (flash_EBIU_AMBCTL_RAT == 8)
+#define flash_EBIU_AMBCTL0_RAT  B0RAT_8
+#endif
+#if (flash_EBIU_AMBCTL_RAT == 7)
+#define flash_EBIU_AMBCTL0_RAT  B0RAT_7
+#endif
+#if (flash_EBIU_AMBCTL_RAT == 6)
+#define flash_EBIU_AMBCTL0_RAT  B0RAT_6
+#endif
+#if (flash_EBIU_AMBCTL_RAT == 5)
+#define flash_EBIU_AMBCTL0_RAT  B0RAT_5
+#endif
+#if (flash_EBIU_AMBCTL_RAT == 4)
+#define flash_EBIU_AMBCTL0_RAT  B0RAT_4
+#endif
+#if (flash_EBIU_AMBCTL_RAT == 3)
+#define flash_EBIU_AMBCTL0_RAT  B0RAT_3
+#endif
+#if (flash_EBIU_AMBCTL_RAT == 2)
+#define flash_EBIU_AMBCTL0_RAT  B0RAT_2
+#endif
+#if (flash_EBIU_AMBCTL_RAT == 1)
+#define flash_EBIU_AMBCTL0_RAT  B0RAT_1
+#endif
+
+#define flash_EBIU_AMBCTL0  \
+	(flash_EBIU_AMBCTL0_WAT | flash_EBIU_AMBCTL0_RAT | flash_EBIU_AMBCTL0_HT | \
+	 flash_EBIU_AMBCTL0_ST | flash_EBIU_AMBCTL0_TT | CONFIG_FLASH_SPEED_RDYEN)
diff --git a/arch/blackfin/mach-bf527/include/mach/mem_map.h b/arch/blackfin/mach-bf527/include/mach/mem_map.h
new file mode 100644
index 000000000000..ef46dc991cd4
--- /dev/null
+++ b/arch/blackfin/mach-bf527/include/mach/mem_map.h
@@ -0,0 +1,102 @@
+/*
+ * file:         include/asm-blackfin/mach-bf527/mem_map.h
+ * based on:	include/asm-blackfin/mach-bf537/mem_map.h
+ * author:	Michael Hennerich (michael.hennerich@analog.com)
+ *
+ * created:
+ * description:
+ *	Memory MAP Common header file for blackfin BF527/5/2 of processors.
+ * rev:
+ *
+ * modified:
+ *
+ * bugs:         enter bugs at http://blackfin.uclinux.org/
+ *
+ * this program is free software; you can redistribute it and/or modify
+ * it under the terms of the gnu general public license as published by
+ * the free software foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * this program is distributed in the hope that it will be useful,
+ * but without any warranty; without even the implied warranty of
+ * merchantability or fitness for a particular purpose.  see the
+ * gnu general public license for more details.
+ *
+ * you should have received a copy of the gnu general public license
+ * along with this program; see the file copying.
+ * if not, write to the free software foundation,
+ * 59 temple place - suite 330, boston, ma 02111-1307, usa.
+ */
+
+#ifndef _MEM_MAP_527_H_
+#define _MEM_MAP_527_H_
+
+#define COREMMR_BASE           0xFFE00000	/* Core MMRs */
+#define SYSMMR_BASE            0xFFC00000	/* System MMRs */
+
+/* Async Memory Banks */
+#define ASYNC_BANK3_BASE	0x20300000	/* Async Bank 3 */
+#define ASYNC_BANK3_SIZE	0x00100000	/* 1M */
+#define ASYNC_BANK2_BASE	0x20200000	/* Async Bank 2 */
+#define ASYNC_BANK2_SIZE	0x00100000	/* 1M */
+#define ASYNC_BANK1_BASE	0x20100000	/* Async Bank 1 */
+#define ASYNC_BANK1_SIZE	0x00100000	/* 1M */
+#define ASYNC_BANK0_BASE	0x20000000	/* Async Bank 0 */
+#define ASYNC_BANK0_SIZE	0x00100000	/* 1M */
+
+/* Boot ROM Memory */
+
+#define BOOT_ROM_START		0xEF000000
+#define BOOT_ROM_LENGTH		0x8000
+
+/* Level 1 Memory */
+
+/* Memory Map for ADSP-BF527 ADSP-BF525 ADSP-BF522 processors */
+
+#ifdef CONFIG_BFIN_ICACHE
+#define BFIN_ICACHESIZE	(16*1024)
+#else
+#define BFIN_ICACHESIZE	(0*1024)
+#endif
+
+#define L1_CODE_START       0xFFA00000
+#define L1_DATA_A_START     0xFF800000
+#define L1_DATA_B_START     0xFF900000
+
+#define L1_CODE_LENGTH      0xC000
+
+#ifdef CONFIG_BFIN_DCACHE
+
+#ifdef CONFIG_BFIN_DCACHE_BANKA
+#define DMEM_CNTR (ACACHE_BSRAM | ENDCPLB | PORT_PREF0)
+#define L1_DATA_A_LENGTH      (0x8000 - 0x4000)
+#define L1_DATA_B_LENGTH      0x8000
+#define BFIN_DCACHESIZE	(16*1024)
+#define BFIN_DSUPBANKS	1
+#else
+#define DMEM_CNTR (ACACHE_BCACHE | ENDCPLB | PORT_PREF0)
+#define L1_DATA_A_LENGTH      (0x8000 - 0x4000)
+#define L1_DATA_B_LENGTH      (0x8000 - 0x4000)
+#define BFIN_DCACHESIZE	(32*1024)
+#define BFIN_DSUPBANKS	2
+#endif
+
+#else
+#define DMEM_CNTR (ASRAM_BSRAM | ENDCPLB | PORT_PREF0)
+#define L1_DATA_A_LENGTH      0x8000
+#define L1_DATA_B_LENGTH      0x8000
+#define BFIN_DCACHESIZE	(0*1024)
+#define BFIN_DSUPBANKS	0
+#endif				/*CONFIG_BFIN_DCACHE */
+
+/* Level 2 Memory - none */
+
+#define L2_START	0
+#define L2_LENGTH	0
+
+/* Scratch Pad Memory */
+
+#define L1_SCRATCH_START	0xFFB00000
+#define L1_SCRATCH_LENGTH	0x1000
+
+#endif				/* _MEM_MAP_527_H_ */
diff --git a/include/asm-blackfin/mach-bf527/portmux.h b/arch/blackfin/mach-bf527/include/mach/portmux.h
index ae4d205bfcf5..ae4d205bfcf5 100644
--- a/include/asm-blackfin/mach-bf527/portmux.h
+++ b/arch/blackfin/mach-bf527/include/mach/portmux.h
diff --git a/arch/blackfin/mach-bf527/ints-priority.c b/arch/blackfin/mach-bf527/ints-priority.c
index 1fa389793968..8a2367403d2b 100644
--- a/arch/blackfin/mach-bf527/ints-priority.c
+++ b/arch/blackfin/mach-bf527/ints-priority.c
@@ -31,7 +31,7 @@
 #include <linux/irq.h>
 #include <asm/blackfin.h>
 
-void program_IAR(void)
+void __init program_IAR(void)
 {
 	/* Program the IAR0 Register with the configured priority */
 	bfin_write_SIC_IAR0(((CONFIG_IRQ_PLL_WAKEUP - 7) << IRQ_PLL_WAKEUP_POS) |
diff --git a/arch/blackfin/mach-bf533/boards/H8606.c b/arch/blackfin/mach-bf533/boards/H8606.c
index 4103a97c1a70..c66a68f30239 100644
--- a/arch/blackfin/mach-bf533/boards/H8606.c
+++ b/arch/blackfin/mach-bf533/boards/H8606.c
@@ -38,7 +38,6 @@
 #if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
 #include <linux/usb/isp1362.h>
 #endif
-#include <linux/ata_platform.h>
 #include <linux/irq.h>
 
 #include <asm/dma.h>
@@ -141,16 +140,16 @@ static struct platform_device net2272_bfin_device = {
 #if defined(CONFIG_MTD_M25P80) || defined(CONFIG_MTD_M25P80_MODULE)
 static struct mtd_partition bfin_spi_flash_partitions[] = {
 	{
-		.name = "bootloader",
+		.name = "bootloader(spi)",
 		.size = 0x00060000,
 		.offset = 0,
 		.mask_flags = MTD_CAP_ROM
 	}, {
-		.name = "kernel",
+		.name = "linux kernel(spi)",
 		.size = 0x100000,
 		.offset = 0x60000
 	}, {
-		.name = "file system",
+		.name = "file system(spi)",
 		.size = 0x6a0000,
 		.offset = 0x00160000,
 	}
diff --git a/arch/blackfin/mach-bf533/boards/Kconfig b/arch/blackfin/mach-bf533/boards/Kconfig
index 840059241fbe..308c98dc5aba 100644
--- a/arch/blackfin/mach-bf533/boards/Kconfig
+++ b/arch/blackfin/mach-bf533/boards/Kconfig
@@ -14,6 +14,12 @@ config BFIN533_STAMP
 	help
 	  BF533-STAMP board support.
 
+config BLACKSTAMP
+	bool "BlackStamp"
+	help
+	  Support for the BlackStamp board.  Hardware info available at
+	  http://blackfin.uclinux.org/gf/project/blackstamp/
+
 config BFIN533_BLUETECHNIX_CM
 	bool "Bluetechnix CM-BF533"
 	depends on (BF533)
diff --git a/arch/blackfin/mach-bf533/boards/Makefile b/arch/blackfin/mach-bf533/boards/Makefile
index b7a1a1d79bda..9afbe72b484f 100644
--- a/arch/blackfin/mach-bf533/boards/Makefile
+++ b/arch/blackfin/mach-bf533/boards/Makefile
@@ -7,4 +7,5 @@ obj-$(CONFIG_BFIN533_STAMP)            += stamp.o
 obj-$(CONFIG_BFIN532_IP0X)             += ip0x.o
 obj-$(CONFIG_BFIN533_EZKIT)            += ezkit.o
 obj-$(CONFIG_BFIN533_BLUETECHNIX_CM)   += cm_bf533.o
+obj-$(CONFIG_BLACKSTAMP)               += blackstamp.o
 obj-$(CONFIG_H8606_HVSISTEMAS)         += H8606.o
diff --git a/arch/blackfin/mach-bf533/boards/blackstamp.c b/arch/blackfin/mach-bf533/boards/blackstamp.c
new file mode 100644
index 000000000000..d064ded87719
--- /dev/null
+++ b/arch/blackfin/mach-bf533/boards/blackstamp.c
@@ -0,0 +1,401 @@
+/*
+ * File:         arch/blackfin/mach-bf533/blackstamp.c
+ * Based on:     arch/blackfin/mach-bf533/stamp.c
+ * Author:       Benjamin Matthews <bmat@lle.rochester.edu>
+ *               Aidan Williams <aidan@nicta.com.au>
+ *
+ * Created:      2008
+ * Description:  Board Info File for the BlackStamp
+ *
+ * Copyright 2005 National ICT Australia (NICTA)
+ * Copyright 2004-2008 Analog Devices Inc.
+ *
+ * Enter bugs at http://blackfin.uclinux.org/
+ *
+ * More info about the BlackStamp at:
+ * 	http://blackfin.uclinux.org/gf/project/blackstamp/
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#include <linux/device.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/physmap.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/flash.h>
+#include <linux/irq.h>
+#include <linux/i2c.h>
+#include <asm/dma.h>
+#include <asm/bfin5xx_spi.h>
+#include <asm/portmux.h>
+#include <asm/dpmc.h>
+
+/*
+ * Name the Board for the /proc/cpuinfo
+ */
+const char bfin_board_name[] = "BlackStamp";
+
+#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
+static struct platform_device rtc_device = {
+	.name = "rtc-bfin",
+	.id   = -1,
+};
+#endif
+
+/*
+ *  Driver needs to know address, irq and flag pin.
+ */
+#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
+static struct resource smc91x_resources[] = {
+	{
+		.name = "smc91x-regs",
+		.start = 0x20300300,
+		.end = 0x20300300 + 16,
+		.flags = IORESOURCE_MEM,
+	}, {
+		.start = IRQ_PF3,
+		.end = IRQ_PF3,
+		.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
+	},
+};
+
+static struct platform_device smc91x_device = {
+	.name = "smc91x",
+	.id = 0,
+	.num_resources = ARRAY_SIZE(smc91x_resources),
+	.resource = smc91x_resources,
+};
+#endif
+
+#if defined(CONFIG_MTD_M25P80) || defined(CONFIG_MTD_M25P80_MODULE)
+static struct mtd_partition bfin_spi_flash_partitions[] = {
+	{
+		.name = "bootloader(spi)",
+		.size = 0x00040000,
+		.offset = 0,
+		.mask_flags = MTD_CAP_ROM
+	}, {
+		.name = "linux kernel(spi)",
+		.size = 0x180000,
+		.offset = MTDPART_OFS_APPEND,
+	}, {
+		.name = "file system(spi)",
+		.size = MTDPART_SIZ_FULL,
+		.offset = MTDPART_OFS_APPEND,
+	}
+};
+
+static struct flash_platform_data bfin_spi_flash_data = {
+	.name = "m25p80",
+	.parts = bfin_spi_flash_partitions,
+	.nr_parts = ARRAY_SIZE(bfin_spi_flash_partitions),
+	.type = "m25p64",
+};
+
+/* SPI flash chip (m25p64) */
+static struct bfin5xx_spi_chip spi_flash_chip_info = {
+	.enable_dma = 0,         /* use dma transfer with this chip*/
+	.bits_per_word = 8,
+};
+#endif
+
+#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
+static struct bfin5xx_spi_chip spi_mmc_chip_info = {
+	.enable_dma = 1,
+	.bits_per_word = 8,
+};
+#endif
+
+#if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE)
+static struct bfin5xx_spi_chip spidev_chip_info = {
+	.enable_dma = 0,
+	.bits_per_word = 8,
+};
+#endif
+
+static struct spi_board_info bfin_spi_board_info[] __initdata = {
+#if defined(CONFIG_MTD_M25P80) || defined(CONFIG_MTD_M25P80_MODULE)
+	{
+		/* the modalias must be the same as spi device driver name */
+		.modalias = "m25p80", /* Name of spi_driver for this device */
+		.max_speed_hz = 20000000,     /* max spi clock (SCK) speed in HZ */
+		.bus_num = 0, /* Framework bus number */
+		.chip_select = 2, /* Framework chip select. */
+		.platform_data = &bfin_spi_flash_data,
+		.controller_data = &spi_flash_chip_info,
+		.mode = SPI_MODE_3,
+	},
+#endif
+
+#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
+	{
+		.modalias = "spi_mmc_dummy",
+		.max_speed_hz = 20000000,     /* max spi clock (SCK) speed in HZ */
+		.bus_num = 0,
+		.chip_select = 0,
+		.platform_data = NULL,
+		.controller_data = &spi_mmc_chip_info,
+		.mode = SPI_MODE_3,
+	},
+	{
+		.modalias = "spi_mmc",
+		.max_speed_hz = 20000000,     /* max spi clock (SCK) speed in HZ */
+		.bus_num = 0,
+		.chip_select = CONFIG_SPI_MMC_CS_CHAN,
+		.platform_data = NULL,
+		.controller_data = &spi_mmc_chip_info,
+		.mode = SPI_MODE_3,
+	},
+#endif
+
+#if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE)
+	{
+		.modalias = "spidev",
+		.max_speed_hz = 3125000,     /* max spi clock (SCK) speed in HZ */
+		.bus_num = 0,
+		.chip_select = 7,
+		.controller_data = &spidev_chip_info,
+	},
+#endif
+};
+
+#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
+/* SPI (0) */
+static struct resource bfin_spi0_resource[] = {
+	[0] = {
+		.start = SPI0_REGBASE,
+		.end   = SPI0_REGBASE + 0xFF,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = CH_SPI,
+		.end   = CH_SPI,
+		.flags = IORESOURCE_IRQ,
+	}
+};
+
+/* SPI controller data */
+static struct bfin5xx_spi_master bfin_spi0_info = {
+	.num_chipselect = 8,
+	.enable_dma = 1,  /* master has the ability to do dma transfer */
+	.pin_req = {P_SPI0_SCK, P_SPI0_MISO, P_SPI0_MOSI, 0},
+};
+
+static struct platform_device bfin_spi0_device = {
+	.name = "bfin-spi",
+	.id = 0, /* Bus number */
+	.num_resources = ARRAY_SIZE(bfin_spi0_resource),
+	.resource = bfin_spi0_resource,
+	.dev = {
+		.platform_data = &bfin_spi0_info, /* Passed to driver */
+	},
+};
+#endif  /* spi master and devices */
+
+#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
+static struct resource bfin_uart_resources[] = {
+	{
+		.start = 0xFFC00400,
+		.end = 0xFFC004FF,
+		.flags = IORESOURCE_MEM,
+	},
+};
+
+static struct platform_device bfin_uart_device = {
+	.name = "bfin-uart",
+	.id = 1,
+	.num_resources = ARRAY_SIZE(bfin_uart_resources),
+	.resource = bfin_uart_resources,
+};
+#endif
+
+#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
+static struct resource bfin_sir_resources[] = {
+#ifdef CONFIG_BFIN_SIR0
+	{
+		.start = 0xFFC00400,
+		.end = 0xFFC004FF,
+		.flags = IORESOURCE_MEM,
+	},
+#endif
+};
+
+static struct platform_device bfin_sir_device = {
+	.name = "bfin_sir",
+	.id = 0,
+	.num_resources = ARRAY_SIZE(bfin_sir_resources),
+	.resource = bfin_sir_resources,
+};
+#endif
+
+#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
+static struct platform_device bfin_sport0_uart_device = {
+	.name = "bfin-sport-uart",
+	.id = 0,
+};
+
+static struct platform_device bfin_sport1_uart_device = {
+	.name = "bfin-sport-uart",
+	.id = 1,
+};
+#endif
+
+#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
+#include <linux/input.h>
+#include <linux/gpio_keys.h>
+
+static struct gpio_keys_button bfin_gpio_keys_table[] = {
+	{BTN_0, GPIO_PF4, 0, "gpio-keys: BTN0"},
+	{BTN_1, GPIO_PF5, 0, "gpio-keys: BTN1"},
+	{BTN_2, GPIO_PF6, 0, "gpio-keys: BTN2"},
+}; /* Mapped to the first three PF Test Points */
+
+static struct gpio_keys_platform_data bfin_gpio_keys_data = {
+	.buttons        = bfin_gpio_keys_table,
+	.nbuttons       = ARRAY_SIZE(bfin_gpio_keys_table),
+};
+
+static struct platform_device bfin_device_gpiokeys = {
+	.name      = "gpio-keys",
+	.dev = {
+		.platform_data = &bfin_gpio_keys_data,
+	},
+};
+#endif
+
+static struct resource bfin_gpios_resources = {
+	.start = 0,
+	.end   = MAX_BLACKFIN_GPIOS - 1,
+	.flags = IORESOURCE_IRQ,
+};
+
+static struct platform_device bfin_gpios_device = {
+	.name = "simple-gpio",
+	.id = -1,
+	.num_resources = 1,
+	.resource = &bfin_gpios_resources,
+};
+
+#if defined(CONFIG_I2C_GPIO) || defined(CONFIG_I2C_GPIO_MODULE)
+#include <linux/i2c-gpio.h>
+
+static struct i2c_gpio_platform_data i2c_gpio_data = {
+	.sda_pin		= 8,
+	.scl_pin		= 9,
+	.sda_is_open_drain	= 0,
+	.scl_is_open_drain	= 0,
+	.udelay			= 40,
+}; /* This hasn't actually been used these pins
+    * are (currently) free pins on the expansion connector */
+
+static struct platform_device i2c_gpio_device = {
+	.name		= "i2c-gpio",
+	.id		= 0,
+	.dev		= {
+		.platform_data	= &i2c_gpio_data,
+	},
+};
+#endif
+
+#ifdef CONFIG_I2C_BOARDINFO
+static struct i2c_board_info __initdata bfin_i2c_board_info[] = {
+};
+#endif
+
+static const unsigned int cclk_vlev_datasheet[] =
+{
+	VRPAIR(VLEV_085, 250000000),
+	VRPAIR(VLEV_090, 376000000),
+	VRPAIR(VLEV_095, 426000000),
+	VRPAIR(VLEV_100, 426000000),
+	VRPAIR(VLEV_105, 476000000),
+	VRPAIR(VLEV_110, 476000000),
+	VRPAIR(VLEV_115, 476000000),
+	VRPAIR(VLEV_120, 600000000),
+	VRPAIR(VLEV_125, 600000000),
+	VRPAIR(VLEV_130, 600000000),
+};
+
+static struct bfin_dpmc_platform_data bfin_dmpc_vreg_data = {
+	.tuple_tab = cclk_vlev_datasheet,
+	.tabsize = ARRAY_SIZE(cclk_vlev_datasheet),
+	.vr_settling_time = 25 /* us */,
+};
+
+static struct platform_device bfin_dpmc = {
+	.name = "bfin dpmc",
+	.dev = {
+		.platform_data = &bfin_dmpc_vreg_data,
+	},
+};
+
+static struct platform_device *stamp_devices[] __initdata = {
+
+	&bfin_dpmc,
+
+#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
+	&rtc_device,
+#endif
+
+#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
+	&smc91x_device,
+#endif
+
+
+#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
+	&bfin_spi0_device,
+#endif
+
+#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
+	&bfin_uart_device,
+#endif
+
+#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
+	&bfin_sir_device,
+#endif
+
+#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
+	&bfin_sport0_uart_device,
+	&bfin_sport1_uart_device,
+#endif
+
+#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
+	&bfin_device_gpiokeys,
+#endif
+
+#if defined(CONFIG_I2C_GPIO) || defined(CONFIG_I2C_GPIO_MODULE)
+	&i2c_gpio_device,
+#endif
+
+	&bfin_gpios_device,
+};
+
+static int __init blackstamp_init(void)
+{
+	int ret;
+
+	printk(KERN_INFO "%s(): registering device resources\n", __func__);
+
+#ifdef CONFIG_I2C_BOARDINFO
+	i2c_register_board_info(0, bfin_i2c_board_info,
+				ARRAY_SIZE(bfin_i2c_board_info));
+#endif
+
+	ret = platform_add_devices(stamp_devices, ARRAY_SIZE(stamp_devices));
+	if (ret < 0)
+		return ret;
+
+#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
+	/* setup BF533_STAMP CPLD to route AMS3 to Ethernet MAC */
+	bfin_write_FIO_DIR(bfin_read_FIO_DIR() | PF0);
+	bfin_write_FIO_FLAG_S(PF0);
+	SSYNC();
+#endif
+
+	spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info));
+	return 0;
+}
+
+arch_initcall(blackstamp_init);
diff --git a/arch/blackfin/mach-bf533/boards/cm_bf533.c b/arch/blackfin/mach-bf533/boards/cm_bf533.c
index ed2b0b8f5dc9..575843f6d9ef 100644
--- a/arch/blackfin/mach-bf533/boards/cm_bf533.c
+++ b/arch/blackfin/mach-bf533/boards/cm_bf533.c
@@ -36,7 +36,6 @@
 #if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
 #include <linux/usb/isp1362.h>
 #endif
-#include <linux/ata_platform.h>
 #include <linux/irq.h>
 #include <asm/dma.h>
 #include <asm/bfin5xx_spi.h>
@@ -53,16 +52,16 @@ const char bfin_board_name[] = "Bluetechnix CM BF533";
 #if defined(CONFIG_MTD_M25P80) || defined(CONFIG_MTD_M25P80_MODULE)
 static struct mtd_partition bfin_spi_flash_partitions[] = {
 	{
-		.name = "bootloader",
+		.name = "bootloader(spi)",
 		.size = 0x00020000,
 		.offset = 0,
 		.mask_flags = MTD_CAP_ROM
 	}, {
-		.name = "kernel",
+		.name = "linux kernel(spi)",
 		.size = 0xe0000,
 		.offset = 0x20000
 	}, {
-		.name = "file system",
+		.name = "file system(spi)",
 		.size = 0x700000,
 		.offset = 0x00100000,
 	}
@@ -307,43 +306,6 @@ static struct platform_device isp1362_hcd_device = {
 };
 #endif
 
-#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
-#define PATA_INT	38
-
-static struct pata_platform_info bfin_pata_platform_data = {
-	.ioport_shift = 2,
-	.irq_type = IRQF_TRIGGER_HIGH | IRQF_DISABLED,
-};
-
-static struct resource bfin_pata_resources[] = {
-	{
-		.start = 0x2030C000,
-		.end = 0x2030C01F,
-		.flags = IORESOURCE_MEM,
-	},
-	{
-		.start = 0x2030D018,
-		.end = 0x2030D01B,
-		.flags = IORESOURCE_MEM,
-	},
-	{
-		.start = PATA_INT,
-		.end = PATA_INT,
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device bfin_pata_device = {
-	.name = "pata_platform",
-	.id = -1,
-	.num_resources = ARRAY_SIZE(bfin_pata_resources),
-	.resource = bfin_pata_resources,
-	.dev = {
-		.platform_data = &bfin_pata_platform_data,
-	}
-};
-#endif
-
 static const unsigned int cclk_vlev_datasheet[] =
 {
 	VRPAIR(VLEV_085, 250000000),
@@ -403,10 +365,6 @@ static struct platform_device *cm_bf533_devices[] __initdata = {
 #if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
 	&bfin_spi0_device,
 #endif
-
-#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
-	&bfin_pata_device,
-#endif
 };
 
 static int __init cm_bf533_init(void)
@@ -416,10 +374,6 @@ static int __init cm_bf533_init(void)
 #if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
 	spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info));
 #endif
-
-#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
-	irq_desc[PATA_INT].status |= IRQ_NOAUTOEN;
-#endif
 	return 0;
 }
 
diff --git a/arch/blackfin/mach-bf533/boards/ezkit.c b/arch/blackfin/mach-bf533/boards/ezkit.c
index 079389cbd859..cc2e7eeb1d5a 100644
--- a/arch/blackfin/mach-bf533/boards/ezkit.c
+++ b/arch/blackfin/mach-bf533/boards/ezkit.c
@@ -37,7 +37,6 @@
 #if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
 #include <linux/usb/isp1362.h>
 #endif
-#include <linux/ata_platform.h>
 #include <linux/irq.h>
 #include <asm/dma.h>
 #include <asm/bfin5xx_spi.h>
@@ -90,16 +89,16 @@ static struct platform_device smc91x_device = {
 #if defined(CONFIG_MTD_M25P80) || defined(CONFIG_MTD_M25P80_MODULE)
 static struct mtd_partition bfin_spi_flash_partitions[] = {
 	{
-		.name = "bootloader",
+		.name = "bootloader(spi)",
 		.size = 0x00020000,
 		.offset = 0,
 		.mask_flags = MTD_CAP_ROM
 	}, {
-		.name = "kernel",
+		.name = "linux kernel(spi)",
 		.size = 0xe0000,
 		.offset = MTDPART_OFS_APPEND,
 	}, {
-		.name = "file system",
+		.name = "file system(spi)",
 		.size = MTDPART_SIZ_FULL,
 		.offset = MTDPART_OFS_APPEND,
 	}
@@ -255,43 +254,6 @@ static struct platform_device bfin_sir_device = {
 };
 #endif
 
-#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
-#define PATA_INT	55
-
-static struct pata_platform_info bfin_pata_platform_data = {
-	.ioport_shift = 1,
-	.irq_type = IRQF_TRIGGER_HIGH | IRQF_DISABLED,
-};
-
-static struct resource bfin_pata_resources[] = {
-	{
-		.start = 0x20314020,
-		.end = 0x2031403F,
-		.flags = IORESOURCE_MEM,
-	},
-	{
-		.start = 0x2031401C,
-		.end = 0x2031401F,
-		.flags = IORESOURCE_MEM,
-	},
-	{
-		.start = PATA_INT,
-		.end = PATA_INT,
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device bfin_pata_device = {
-	.name = "pata_platform",
-	.id = -1,
-	.num_resources = ARRAY_SIZE(bfin_pata_resources),
-	.resource = bfin_pata_resources,
-	.dev = {
-		.platform_data = &bfin_pata_platform_data,
-	}
-};
-#endif
-
 #if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
 #include <linux/input.h>
 #include <linux/gpio_keys.h>
@@ -404,10 +366,6 @@ static struct platform_device *ezkit_devices[] __initdata = {
 	&bfin_sir_device,
 #endif
 
-#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
-	&bfin_pata_device,
-#endif
-
 #if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
 	&bfin_device_gpiokeys,
 #endif
@@ -424,10 +382,6 @@ static int __init ezkit_init(void)
 	printk(KERN_INFO "%s(): registering device resources\n", __func__);
 	platform_add_devices(ezkit_devices, ARRAY_SIZE(ezkit_devices));
 	spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info));
-
-#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
-	irq_desc[PATA_INT].status |= IRQ_NOAUTOEN;
-#endif
 	return 0;
 }
 
diff --git a/arch/blackfin/mach-bf533/boards/stamp.c b/arch/blackfin/mach-bf533/boards/stamp.c
index 13ae49515f73..050ffca53530 100644
--- a/arch/blackfin/mach-bf533/boards/stamp.c
+++ b/arch/blackfin/mach-bf533/boards/stamp.c
@@ -38,7 +38,6 @@
 #if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
 #include <linux/usb/isp1362.h>
 #endif
-#include <linux/ata_platform.h>
 #include <linux/irq.h>
 #include <linux/i2c.h>
 #include <asm/dma.h>
@@ -114,15 +113,15 @@ static struct platform_device net2272_bfin_device = {
 #if defined(CONFIG_MTD_BFIN_ASYNC) || defined(CONFIG_MTD_BFIN_ASYNC_MODULE)
 static struct mtd_partition stamp_partitions[] = {
 	{
-		.name   = "Bootloader",
+		.name   = "bootloader(nor)",
 		.size   = 0x40000,
 		.offset = 0,
 	}, {
-		.name   = "Kernel",
+		.name   = "linux kernel(nor)",
 		.size   = 0xE0000,
 		.offset = MTDPART_OFS_APPEND,
 	}, {
-		.name   = "RootFS",
+		.name   = "file system(nor)",
 		.size   = MTDPART_SIZ_FULL,
 		.offset = MTDPART_OFS_APPEND,
 	}
@@ -164,16 +163,16 @@ static struct platform_device stamp_flash_device = {
 #if defined(CONFIG_MTD_M25P80) || defined(CONFIG_MTD_M25P80_MODULE)
 static struct mtd_partition bfin_spi_flash_partitions[] = {
 	{
-		.name = "bootloader",
+		.name = "bootloader(spi)",
 		.size = 0x00040000,
 		.offset = 0,
 		.mask_flags = MTD_CAP_ROM
 	}, {
-		.name = "kernel",
+		.name = "linux kernel(spi)",
 		.size = 0xe0000,
 		.offset = MTDPART_OFS_APPEND,
 	}, {
-		.name = "file system",
+		.name = "file system(spi)",
 		.size = MTDPART_SIZ_FULL,
 		.offset = MTDPART_OFS_APPEND,
 	}
@@ -404,43 +403,6 @@ static struct platform_device bfin_sport1_uart_device = {
 };
 #endif
 
-#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
-#define PATA_INT	55
-
-static struct pata_platform_info bfin_pata_platform_data = {
-	.ioport_shift = 1,
-	.irq_type = IRQF_TRIGGER_HIGH | IRQF_DISABLED,
-};
-
-static struct resource bfin_pata_resources[] = {
-	{
-		.start = 0x20314020,
-		.end = 0x2031403F,
-		.flags = IORESOURCE_MEM,
-	},
-	{
-		.start = 0x2031401C,
-		.end = 0x2031401F,
-		.flags = IORESOURCE_MEM,
-	},
-	{
-		.start = PATA_INT,
-		.end = PATA_INT,
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device bfin_pata_device = {
-	.name = "pata_platform",
-	.id = -1,
-	.num_resources = ARRAY_SIZE(bfin_pata_resources),
-	.resource = bfin_pata_resources,
-	.dev = {
-		.platform_data = &bfin_pata_platform_data,
-	}
-};
-#endif
-
 #if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
 #include <linux/input.h>
 #include <linux/gpio_keys.h>
@@ -583,10 +545,6 @@ static struct platform_device *stamp_devices[] __initdata = {
 	&bfin_sport1_uart_device,
 #endif
 
-#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
-	&bfin_pata_device,
-#endif
-
 #if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
 	&bfin_device_gpiokeys,
 #endif
@@ -625,10 +583,6 @@ static int __init stamp_init(void)
 #endif
 
 	spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info));
-
-#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
-	irq_desc[PATA_INT].status |= IRQ_NOAUTOEN;
-#endif
 	return 0;
 }
 
diff --git a/arch/blackfin/mach-bf533/head.S b/arch/blackfin/mach-bf533/head.S
index 1295deac00a4..01b2b7ead5ab 100644
--- a/arch/blackfin/mach-bf533/head.S
+++ b/arch/blackfin/mach-bf533/head.S
@@ -30,296 +30,13 @@
 #include <linux/linkage.h>
 #include <linux/init.h>
 #include <asm/blackfin.h>
-#include <asm/trace.h>
-#if CONFIG_BFIN_KERNEL_CLOCK
-#include <asm/mach-common/clocks.h>
-#include <asm/mach/mem_init.h>
+#ifdef CONFIG_BFIN_KERNEL_CLOCK
+#include <asm/clocks.h>
+#include <mach/mem_init.h>
 #endif
 
-.extern ___bss_stop
-.extern ___bss_start
-.extern _bf53x_relocate_l1_mem
-
-#define INITIAL_STACK	0xFFB01000
-
-__INIT
-
-ENTRY(__start)
-	/* R0: argument of command line string, passed from uboot, save it */
-	R7 = R0;
-	/* Enable Cycle Counter and Nesting Of Interrupts */
-#ifdef CONFIG_BFIN_SCRATCH_REG_CYCLES
-	R0 = SYSCFG_SNEN;
-#else
-	R0 = SYSCFG_SNEN | SYSCFG_CCEN;
-#endif
-	SYSCFG = R0;
-	R0 = 0;
-
-	/* Clear Out All the data and pointer Registers */
-	R1 = R0;
-	R2 = R0;
-	R3 = R0;
-	R4 = R0;
-	R5 = R0;
-	R6 = R0;
-
-	P0 = R0;
-	P1 = R0;
-	P2 = R0;
-	P3 = R0;
-	P4 = R0;
-	P5 = R0;
-
-	LC0 = r0;
-	LC1 = r0;
-	L0 = r0;
-	L1 = r0;
-	L2 = r0;
-	L3 = r0;
-
-	/* Clear Out All the DAG Registers */
-	B0 = r0;
-	B1 = r0;
-	B2 = r0;
-	B3 = r0;
-
-	I0 = r0;
-	I1 = r0;
-	I2 = r0;
-	I3 = r0;
-
-	M0 = r0;
-	M1 = r0;
-	M2 = r0;
-	M3 = r0;
-
-	trace_buffer_init(p0,r0);
-	P0 = R1;
-	R0 = R1;
-
-	p0.h = hi(FIO_MASKA_C);
-	p0.l = lo(FIO_MASKA_C);
-	r0 = 0xFFFF(Z);
-	w[p0] = r0.L;	/* Disable all interrupts */
-	ssync;
-
-	p0.h = hi(FIO_MASKB_C);
-	p0.l = lo(FIO_MASKB_C);
-	r0 = 0xFFFF(Z);
-	w[p0] = r0.L;	/* Disable all interrupts */
-	ssync;
-
-	/* Turn off the icache */
-	p0.l = LO(IMEM_CONTROL);
-	p0.h = HI(IMEM_CONTROL);
-	R1 = [p0];
-	R0 = ~ENICPLB;
-	R0 = R0 & R1;
-
-	/* Anomaly 05000125 */
-#if ANOMALY_05000125
-	CLI R2;
-	SSYNC;
-#endif
-	[p0] = R0;
-	SSYNC;
-#if ANOMALY_05000125
-	STI R2;
-#endif
-
-	/* Turn off the dcache */
-	p0.l = LO(DMEM_CONTROL);
-	p0.h = HI(DMEM_CONTROL);
-	R1 = [p0];
-	R0 = ~ENDCPLB;
-	R0 = R0 & R1;
-
-	/* Anomaly 05000125 */
-#if ANOMALY_05000125
-	CLI R2;
-	SSYNC;
-#endif
-	[p0] = R0;
-	SSYNC;
-#if ANOMALY_05000125
-	STI R2;
-#endif
-
-	/* Initialise UART - when booting from u-boot, the UART is not disabled
-	 * so if we dont initalize here, our serial console gets hosed */
-	p0.h = hi(BFIN_UART_LCR);
-	p0.l = lo(BFIN_UART_LCR);
-	r0 = 0x0(Z);
-	w[p0] = r0.L;	/* To enable DLL writes */
-	ssync;
-
-	p0.h = hi(BFIN_UART_DLL);
-	p0.l = lo(BFIN_UART_DLL);
-	r0 = 0x0(Z);
-	w[p0] = r0.L;
-	ssync;
-
-	p0.h = hi(BFIN_UART_DLH);
-	p0.l = lo(BFIN_UART_DLH);
-	r0 = 0x00(Z);
-	w[p0] = r0.L;
-	ssync;
-
-	p0.h = hi(BFIN_UART_GCTL);
-	p0.l = lo(BFIN_UART_GCTL);
-	r0 = 0x0(Z);
-	w[p0] = r0.L;	/* To enable UART clock */
-	ssync;
-
-	/* Initialize stack pointer */
-	sp.l = lo(INITIAL_STACK);
-	sp.h = hi(INITIAL_STACK);
-	fp = sp;
-	usp = sp;
-
-#ifdef CONFIG_EARLY_PRINTK
-	SP += -12;
-	call _init_early_exception_vectors;
-	SP += 12;
-#endif
-
-	/* Put The Code for PLL Programming and SDRAM Programming in L1 ISRAM */
-	call _bf53x_relocate_l1_mem;
-#if CONFIG_BFIN_KERNEL_CLOCK
-	call _start_dma_code;
-#endif
-
-	/* Code for initializing Async memory banks */
-
-	p2.h = hi(EBIU_AMBCTL1);
-	p2.l = lo(EBIU_AMBCTL1);
-	r0.h = hi(AMBCTL1VAL);
-	r0.l = lo(AMBCTL1VAL);
-	[p2] = r0;
-	ssync;
-
-	p2.h = hi(EBIU_AMBCTL0);
-	p2.l = lo(EBIU_AMBCTL0);
-	r0.h = hi(AMBCTL0VAL);
-	r0.l = lo(AMBCTL0VAL);
-	[p2] = r0;
-	ssync;
-
-	p2.h = hi(EBIU_AMGCTL);
-	p2.l = lo(EBIU_AMGCTL);
-	r0 = AMGCTLVAL;
-	w[p2] = r0;
-	ssync;
-
-	/* This section keeps the processor in supervisor mode
-	 * during kernel boot.  Switches to user mode at end of boot.
-	 * See page 3-9 of Hardware Reference manual for documentation.
-	 */
-
-	/* EVT15 = _real_start */
-
-	p0.l = lo(EVT15);
-	p0.h = hi(EVT15);
-	p1.l = _real_start;
-	p1.h = _real_start;
-	[p0] = p1;
-	csync;
-
-	p0.l = lo(IMASK);
-	p0.h = hi(IMASK);
-	p1.l = IMASK_IVG15;
-	p1.h = 0x0;
-	[p0] = p1;
-	csync;
-
-	raise 15;
-	p0.l = .LWAIT_HERE;
-	p0.h = .LWAIT_HERE;
-	reti = p0;
-#if ANOMALY_05000281
-	nop; nop; nop;
-#endif
-	rti;
-
-.LWAIT_HERE:
-	jump .LWAIT_HERE;
-ENDPROC(__start)
-
-ENTRY(_real_start)
-	[ -- sp ] = reti;
-	p0.l = lo(WDOG_CTL);
-	p0.h = hi(WDOG_CTL);
-	r0 = 0xAD6(z);
-	w[p0] = r0;	/* watchdog off for now */
-	ssync;
-
-	/* Code update for BSS size == 0
-	 * Zero out the bss region.
-	 */
-
-	p1.l = ___bss_start;
-	p1.h = ___bss_start;
-	p2.l = ___bss_stop;
-	p2.h = ___bss_stop;
-	r0 = 0;
-	p2 -= p1;
-	lsetup (.L_clear_bss, .L_clear_bss) lc0 = p2;
-.L_clear_bss:
-	B[p1++] = r0;
-
-	/* In case there is a NULL pointer reference
-	 * Zero out region before stext
-	 */
-
-	p1.l = 0x0;
-	p1.h = 0x0;
-	r0.l = __stext;
-	r0.h = __stext;
-	r0 = r0 >> 1;
-	p2 = r0;
-	r0 = 0;
-	lsetup (.L_clear_zero, .L_clear_zero) lc0 = p2;
-.L_clear_zero:
-	W[p1++] = r0;
-
-	/* pass the uboot arguments to the global value command line */
-	R0 = R7;
-	call _cmdline_init;
-
-	p1.l = __rambase;
-	p1.h = __rambase;
-	r0.l = __sdata;
-	r0.h = __sdata;
-	[p1] = r0;
-
-	p1.l = __ramstart;
-	p1.h = __ramstart;
-	p3.l = ___bss_stop;
-	p3.h = ___bss_stop;
-
-	r1 = p3;
-	[p1] = r1;
-
-	/*
-	 * load the current thread pointer and stack
-	 */
-	r1.l = _init_thread_union;
-	r1.h = _init_thread_union;
-
-	r2.l = 0x2000;
-	r2.h = 0x0000;
-	r1 = r1 + r2;
-	sp = r1;
-	usp = sp;
-	fp = sp;
-	jump.l _start_kernel;
-ENDPROC(_real_start)
-
-__FINIT
-
 .section .l1.text
-#if CONFIG_BFIN_KERNEL_CLOCK
+#ifdef CONFIG_BFIN_KERNEL_CLOCK
 ENTRY(_start_dma_code)
 	p0.h = hi(SIC_IWR);
 	p0.l = lo(SIC_IWR);
@@ -390,12 +107,6 @@ ENTRY(_start_dma_code)
 	w[p0] = r0.l;
 	ssync;
 
-	p0.l = LO(EBIU_SDBCTL);
-	p0.h = HI(EBIU_SDBCTL);     /* SDRAM Memory Bank Control Register */
-	r0 = mem_SDBCTL;
-	w[p0] = r0.l;
-	ssync;
-
 	P2.H = hi(EBIU_SDGCTL);
 	P2.L = lo(EBIU_SDGCTL);
 	R0 = [P2];
@@ -418,13 +129,6 @@ ENTRY(_start_dma_code)
 	[P2] = R1;
 	SSYNC;
 
-	p0.h = hi(SIC_IWR);
-	p0.l = lo(SIC_IWR);
-	r0.l = lo(IWR_ENABLE_ALL);
-	r0.h = hi(IWR_ENABLE_ALL);
-	[p0] = r0;
-	SSYNC;
-
 	RTS;
 ENDPROC(_start_dma_code)
 #endif /* CONFIG_BFIN_KERNEL_CLOCK */
diff --git a/include/asm-blackfin/mach-bf533/anomaly.h b/arch/blackfin/mach-bf533/include/mach/anomaly.h
index 8f7ea112fd3a..8f7ea112fd3a 100644
--- a/include/asm-blackfin/mach-bf533/anomaly.h
+++ b/arch/blackfin/mach-bf533/include/mach/anomaly.h
diff --git a/include/asm-blackfin/mach-bf533/bf533.h b/arch/blackfin/mach-bf533/include/mach/bf533.h
index 12a416931991..12a416931991 100644
--- a/include/asm-blackfin/mach-bf533/bf533.h
+++ b/arch/blackfin/mach-bf533/include/mach/bf533.h
diff --git a/include/asm-blackfin/mach-bf533/bfin_serial_5xx.h b/arch/blackfin/mach-bf533/include/mach/bfin_serial_5xx.h
index ebf592b59aab..ebf592b59aab 100644
--- a/include/asm-blackfin/mach-bf533/bfin_serial_5xx.h
+++ b/arch/blackfin/mach-bf533/include/mach/bfin_serial_5xx.h
diff --git a/arch/blackfin/mach-bf533/include/mach/bfin_sir.h b/arch/blackfin/mach-bf533/include/mach/bfin_sir.h
new file mode 100644
index 000000000000..9bb87e9e2e9b
--- /dev/null
+++ b/arch/blackfin/mach-bf533/include/mach/bfin_sir.h
@@ -0,0 +1,125 @@
+/*
+ * Blackfin Infra-red Driver
+ *
+ * Copyright 2006-2008 Analog Devices Inc.
+ *
+ * Enter bugs at http://blackfin.uclinux.org/
+ *
+ * Licensed under the GPL-2 or later.
+ *
+ */
+
+#include <linux/serial.h>
+#include <asm/dma.h>
+#include <asm/portmux.h>
+
+#define SIR_UART_GET_CHAR(port)   bfin_read16((port)->membase + OFFSET_RBR)
+#define SIR_UART_GET_DLL(port)    bfin_read16((port)->membase + OFFSET_DLL)
+#define SIR_UART_GET_IER(port)    bfin_read16((port)->membase + OFFSET_IER)
+#define SIR_UART_GET_DLH(port)    bfin_read16((port)->membase + OFFSET_DLH)
+#define SIR_UART_GET_IIR(port)    bfin_read16((port)->membase + OFFSET_IIR)
+#define SIR_UART_GET_LCR(port)    bfin_read16((port)->membase + OFFSET_LCR)
+#define SIR_UART_GET_GCTL(port)   bfin_read16((port)->membase + OFFSET_GCTL)
+
+#define SIR_UART_PUT_CHAR(port, v) bfin_write16(((port)->membase + OFFSET_THR), v)
+#define SIR_UART_PUT_DLL(port, v)  bfin_write16(((port)->membase + OFFSET_DLL), v)
+#define SIR_UART_PUT_IER(port, v)  bfin_write16(((port)->membase + OFFSET_IER), v)
+#define SIR_UART_PUT_DLH(port, v)  bfin_write16(((port)->membase + OFFSET_DLH), v)
+#define SIR_UART_PUT_LCR(port, v)  bfin_write16(((port)->membase + OFFSET_LCR), v)
+#define SIR_UART_PUT_GCTL(port, v) bfin_write16(((port)->membase + OFFSET_GCTL), v)
+
+#ifdef CONFIG_SIR_BFIN_DMA
+struct dma_rx_buf {
+	char *buf;
+	int head;
+	int tail;
+	};
+#endif /* CONFIG_SIR_BFIN_DMA */
+
+struct bfin_sir_port {
+	unsigned char __iomem   *membase;
+	unsigned int            irq;
+	unsigned int            lsr;
+	unsigned long           clk;
+	struct net_device       *dev;
+#ifdef CONFIG_SIR_BFIN_DMA
+	int                     tx_done;
+	struct dma_rx_buf       rx_dma_buf;
+	struct timer_list       rx_dma_timer;
+	int                     rx_dma_nrows;
+#endif /* CONFIG_SIR_BFIN_DMA */
+	unsigned int            tx_dma_channel;
+	unsigned int            rx_dma_channel;
+};
+
+struct bfin_sir_port sir_ports[BFIN_UART_NR_PORTS];
+
+struct bfin_sir_port_res {
+	unsigned long   base_addr;
+	int             irq;
+	unsigned int    rx_dma_channel;
+	unsigned int    tx_dma_channel;
+};
+
+struct bfin_sir_port_res bfin_sir_port_resource[] = {
+#ifdef CONFIG_BFIN_SIR0
+	{
+	0xFFC00400,
+	IRQ_UART_RX,
+	CH_UART_RX,
+	CH_UART_TX,
+	},
+#endif
+};
+
+int nr_sirs = ARRAY_SIZE(bfin_sir_port_resource);
+
+struct bfin_sir_self {
+	struct bfin_sir_port    *sir_port;
+	spinlock_t              lock;
+	unsigned int            open;
+	int                     speed;
+	int                     newspeed;
+
+	struct sk_buff          *txskb;
+	struct sk_buff          *rxskb;
+	struct net_device_stats stats;
+	struct device           *dev;
+	struct irlap_cb         *irlap;
+	struct qos_info         qos;
+
+	iobuff_t                tx_buff;
+	iobuff_t                rx_buff;
+
+	struct work_struct      work;
+	int                     mtt;
+};
+
+static inline unsigned int SIR_UART_GET_LSR(struct bfin_sir_port *port)
+{
+	unsigned int lsr = bfin_read16(port->membase + OFFSET_LSR);
+	port->lsr |= (lsr & (BI|FE|PE|OE));
+	return lsr | port->lsr;
+}
+
+static inline void SIR_UART_CLEAR_LSR(struct bfin_sir_port *port)
+{
+	port->lsr = 0;
+	bfin_read16(port->membase + OFFSET_LSR);
+}
+
+#define DRIVER_NAME "bfin_sir"
+
+static int bfin_sir_hw_init(void)
+{
+	int ret = -ENODEV;
+#ifdef CONFIG_BFIN_SIR0
+	ret = peripheral_request(P_UART0_TX, DRIVER_NAME);
+	if (ret)
+		return ret;
+	ret = peripheral_request(P_UART0_RX, DRIVER_NAME);
+	if (ret)
+		return ret;
+#endif
+	return ret;
+}
diff --git a/include/asm-blackfin/mach-bf533/blackfin.h b/arch/blackfin/mach-bf533/include/mach/blackfin.h
index d80971b4e3aa..d80971b4e3aa 100644
--- a/include/asm-blackfin/mach-bf533/blackfin.h
+++ b/arch/blackfin/mach-bf533/include/mach/blackfin.h
diff --git a/include/asm-blackfin/mach-bf533/cdefBF532.h b/arch/blackfin/mach-bf533/include/mach/cdefBF532.h
index 154655452d4c..3d8978a52c17 100644
--- a/include/asm-blackfin/mach-bf533/cdefBF532.h
+++ b/arch/blackfin/mach-bf533/include/mach/cdefBF532.h
@@ -37,7 +37,7 @@
 #include "defBF532.h"
 
 /*include core specific register pointer definitions*/
-#include <asm/mach-common/cdef_LPBlackfin.h>
+#include <asm/cdef_LPBlackfin.h>
 
 #include <asm/system.h>
 
diff --git a/include/asm-blackfin/mach-bf533/defBF532.h b/arch/blackfin/mach-bf533/include/mach/defBF532.h
index 0ab4dd7494cf..7f4633223e6d 100644
--- a/include/asm-blackfin/mach-bf533/defBF532.h
+++ b/arch/blackfin/mach-bf533/include/mach/defBF532.h
@@ -48,7 +48,7 @@
 #define _DEF_BF532_H
 
 /* include all Core registers and bit definitions */
-#include <asm/mach-common/def_LPBlackfin.h>
+#include <asm/def_LPBlackfin.h>
 
 /*********************************************************************************** */
 /* System MMR Register Map */
diff --git a/include/asm-blackfin/mach-bf533/dma.h b/arch/blackfin/mach-bf533/include/mach/dma.h
index bd9d5e94307d..bd9d5e94307d 100644
--- a/include/asm-blackfin/mach-bf533/dma.h
+++ b/arch/blackfin/mach-bf533/include/mach/dma.h
diff --git a/include/asm-blackfin/mach-bf533/irq.h b/arch/blackfin/mach-bf533/include/mach/irq.h
index 5aa38e5da6b7..5aa38e5da6b7 100644
--- a/include/asm-blackfin/mach-bf533/irq.h
+++ b/arch/blackfin/mach-bf533/include/mach/irq.h
diff --git a/arch/blackfin/mach-bf533/include/mach/mem_init.h b/arch/blackfin/mach-bf533/include/mach/mem_init.h
new file mode 100644
index 000000000000..ed2034bf10ec
--- /dev/null
+++ b/arch/blackfin/mach-bf533/include/mach/mem_init.h
@@ -0,0 +1,297 @@
+/*
+ * File:         include/asm-blackfin/mach-bf533/mem_init.h
+ * Based on:
+ * Author:
+ *
+ * Created:
+ * Description:
+ *
+ * Rev:
+ *
+ * Modified:
+ *               Copyright 2004-2006 Analog Devices Inc.
+ *
+ * Bugs:         Enter bugs at http://blackfin.uclinux.org/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; see the file COPYING.
+ * If not, write to the Free Software Foundation,
+ * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ */
+
+#if (CONFIG_MEM_MT48LC16M16A2TG_75 || CONFIG_MEM_MT48LC64M4A2FB_7E || \
+     CONFIG_MEM_MT48LC32M16A2TG_75 || CONFIG_MEM_GENERIC_BOARD)
+#if (CONFIG_SCLK_HZ > 119402985)
+#define SDRAM_tRP       TRP_2
+#define SDRAM_tRP_num   2
+#define SDRAM_tRAS      TRAS_7
+#define SDRAM_tRAS_num  7
+#define SDRAM_tRCD      TRCD_2
+#define SDRAM_tWR       TWR_2
+#endif
+#if (CONFIG_SCLK_HZ > 104477612) && (CONFIG_SCLK_HZ <= 119402985)
+#define SDRAM_tRP       TRP_2
+#define SDRAM_tRP_num   2
+#define SDRAM_tRAS      TRAS_6
+#define SDRAM_tRAS_num  6
+#define SDRAM_tRCD      TRCD_2
+#define SDRAM_tWR       TWR_2
+#endif
+#if (CONFIG_SCLK_HZ > 89552239) && (CONFIG_SCLK_HZ <= 104477612)
+#define SDRAM_tRP       TRP_2
+#define SDRAM_tRP_num   2
+#define SDRAM_tRAS      TRAS_5
+#define SDRAM_tRAS_num  5
+#define SDRAM_tRCD      TRCD_2
+#define SDRAM_tWR       TWR_2
+#endif
+#if (CONFIG_SCLK_HZ > 74626866) && (CONFIG_SCLK_HZ <= 89552239)
+#define SDRAM_tRP       TRP_2
+#define SDRAM_tRP_num   2
+#define SDRAM_tRAS      TRAS_4
+#define SDRAM_tRAS_num  4
+#define SDRAM_tRCD      TRCD_2
+#define SDRAM_tWR       TWR_2
+#endif
+#if (CONFIG_SCLK_HZ > 66666667) && (CONFIG_SCLK_HZ <= 74626866)
+#define SDRAM_tRP       TRP_2
+#define SDRAM_tRP_num   2
+#define SDRAM_tRAS      TRAS_3
+#define SDRAM_tRAS_num  3
+#define SDRAM_tRCD      TRCD_2
+#define SDRAM_tWR       TWR_2
+#endif
+#if (CONFIG_SCLK_HZ > 59701493) && (CONFIG_SCLK_HZ <= 66666667)
+#define SDRAM_tRP       TRP_1
+#define SDRAM_tRP_num   1
+#define SDRAM_tRAS      TRAS_4
+#define SDRAM_tRAS_num  3
+#define SDRAM_tRCD      TRCD_1
+#define SDRAM_tWR       TWR_2
+#endif
+#if (CONFIG_SCLK_HZ > 44776119) && (CONFIG_SCLK_HZ <= 59701493)
+#define SDRAM_tRP       TRP_1
+#define SDRAM_tRP_num   1
+#define SDRAM_tRAS      TRAS_3
+#define SDRAM_tRAS_num  3
+#define SDRAM_tRCD      TRCD_1
+#define SDRAM_tWR       TWR_2
+#endif
+#if (CONFIG_SCLK_HZ > 29850746) && (CONFIG_SCLK_HZ <= 44776119)
+#define SDRAM_tRP       TRP_1
+#define SDRAM_tRP_num   1
+#define SDRAM_tRAS      TRAS_2
+#define SDRAM_tRAS_num  2
+#define SDRAM_tRCD      TRCD_1
+#define SDRAM_tWR       TWR_2
+#endif
+#if (CONFIG_SCLK_HZ <= 29850746)
+#define SDRAM_tRP       TRP_1
+#define SDRAM_tRP_num   1
+#define SDRAM_tRAS      TRAS_1
+#define SDRAM_tRAS_num  1
+#define SDRAM_tRCD      TRCD_1
+#define SDRAM_tWR       TWR_2
+#endif
+#endif
+
+#if (CONFIG_MEM_MT48LC16M16A2TG_75)
+  /*SDRAM INFORMATION: */
+#define SDRAM_Tref  64		/* Refresh period in milliseconds   */
+#define SDRAM_NRA   8192	/* Number of row addresses in SDRAM */
+#define SDRAM_CL    CL_3
+#endif
+
+#if (CONFIG_MEM_MT48LC64M4A2FB_7E)
+  /*SDRAM INFORMATION: */
+#define SDRAM_Tref  64		/* Refresh period in milliseconds   */
+#define SDRAM_NRA   8192	/* Number of row addresses in SDRAM */
+#define SDRAM_CL    CL_3
+#endif
+
+#if (CONFIG_MEM_MT48LC32M16A2TG_75)
+  /*SDRAM INFORMATION: */
+#define SDRAM_Tref  64		/* Refresh period in milliseconds   */
+#define SDRAM_NRA   8192	/* Number of row addresses in SDRAM */
+#define SDRAM_CL    CL_3
+#endif
+
+#if (CONFIG_MEM_GENERIC_BOARD)
+  /*SDRAM INFORMATION: Modify this for your board */
+#define SDRAM_Tref  64		/* Refresh period in milliseconds   */
+#define SDRAM_NRA   8192	/* Number of row addresses in SDRAM */
+#define SDRAM_CL    CL_3
+#endif
+
+/* Equation from section 17 (p17-46) of BF533 HRM */
+#define mem_SDRRC       (((CONFIG_SCLK_HZ / 1000) * SDRAM_Tref)  / SDRAM_NRA) - (SDRAM_tRAS_num + SDRAM_tRP_num)
+
+/* Enable SCLK Out */
+#define mem_SDGCTL        (SCTLE | SDRAM_CL | SDRAM_tRAS | SDRAM_tRP | SDRAM_tRCD | SDRAM_tWR | PSS)
+
+#if defined CONFIG_CLKIN_HALF
+#define CLKIN_HALF       1
+#else
+#define CLKIN_HALF       0
+#endif
+
+#if defined CONFIG_PLL_BYPASS
+#define PLL_BYPASS      1
+#else
+#define PLL_BYPASS       0
+#endif
+
+/***************************************Currently Not Being Used *********************************/
+#define flash_EBIU_AMBCTL_WAT  ((CONFIG_FLASH_SPEED_BWAT * 4) / (4000000000 / CONFIG_SCLK_HZ)) + 1
+#define flash_EBIU_AMBCTL_RAT  ((CONFIG_FLASH_SPEED_BRAT * 4) / (4000000000 / CONFIG_SCLK_HZ)) + 1
+#define flash_EBIU_AMBCTL_HT   ((CONFIG_FLASH_SPEED_BHT  * 4) / (4000000000 / CONFIG_SCLK_HZ))
+#define flash_EBIU_AMBCTL_ST   ((CONFIG_FLASH_SPEED_BST  * 4) / (4000000000 / CONFIG_SCLK_HZ)) + 1
+#define flash_EBIU_AMBCTL_TT   ((CONFIG_FLASH_SPEED_BTT  * 4) / (4000000000 / CONFIG_SCLK_HZ)) + 1
+
+#if (flash_EBIU_AMBCTL_TT > 3)
+#define flash_EBIU_AMBCTL0_TT   B0TT_4
+#endif
+#if (flash_EBIU_AMBCTL_TT == 3)
+#define flash_EBIU_AMBCTL0_TT   B0TT_3
+#endif
+#if (flash_EBIU_AMBCTL_TT == 2)
+#define flash_EBIU_AMBCTL0_TT   B0TT_2
+#endif
+#if (flash_EBIU_AMBCTL_TT < 2)
+#define flash_EBIU_AMBCTL0_TT   B0TT_1
+#endif
+
+#if (flash_EBIU_AMBCTL_ST > 3)
+#define flash_EBIU_AMBCTL0_ST   B0ST_4
+#endif
+#if (flash_EBIU_AMBCTL_ST == 3)
+#define flash_EBIU_AMBCTL0_ST   B0ST_3
+#endif
+#if (flash_EBIU_AMBCTL_ST == 2)
+#define flash_EBIU_AMBCTL0_ST   B0ST_2
+#endif
+#if (flash_EBIU_AMBCTL_ST < 2)
+#define flash_EBIU_AMBCTL0_ST   B0ST_1
+#endif
+
+#if (flash_EBIU_AMBCTL_HT > 2)
+#define flash_EBIU_AMBCTL0_HT   B0HT_3
+#endif
+#if (flash_EBIU_AMBCTL_HT == 2)
+#define flash_EBIU_AMBCTL0_HT   B0HT_2
+#endif
+#if (flash_EBIU_AMBCTL_HT == 1)
+#define flash_EBIU_AMBCTL0_HT   B0HT_1
+#endif
+#if (flash_EBIU_AMBCTL_HT == 0 && CONFIG_FLASH_SPEED_BHT == 0)
+#define flash_EBIU_AMBCTL0_HT   B0HT_0
+#endif
+#if (flash_EBIU_AMBCTL_HT == 0 && CONFIG_FLASH_SPEED_BHT != 0)
+#define flash_EBIU_AMBCTL0_HT   B0HT_1
+#endif
+
+#if (flash_EBIU_AMBCTL_WAT > 14)
+#define flash_EBIU_AMBCTL0_WAT  B0WAT_15
+#endif
+#if (flash_EBIU_AMBCTL_WAT == 14)
+#define flash_EBIU_AMBCTL0_WAT  B0WAT_14
+#endif
+#if (flash_EBIU_AMBCTL_WAT == 13)
+#define flash_EBIU_AMBCTL0_WAT  B0WAT_13
+#endif
+#if (flash_EBIU_AMBCTL_WAT == 12)
+#define flash_EBIU_AMBCTL0_WAT  B0WAT_12
+#endif
+#if (flash_EBIU_AMBCTL_WAT == 11)
+#define flash_EBIU_AMBCTL0_WAT  B0WAT_11
+#endif
+#if (flash_EBIU_AMBCTL_WAT == 10)
+#define flash_EBIU_AMBCTL0_WAT  B0WAT_10
+#endif
+#if (flash_EBIU_AMBCTL_WAT == 9)
+#define flash_EBIU_AMBCTL0_WAT  B0WAT_9
+#endif
+#if (flash_EBIU_AMBCTL_WAT == 8)
+#define flash_EBIU_AMBCTL0_WAT  B0WAT_8
+#endif
+#if (flash_EBIU_AMBCTL_WAT == 7)
+#define flash_EBIU_AMBCTL0_WAT  B0WAT_7
+#endif
+#if (flash_EBIU_AMBCTL_WAT == 6)
+#define flash_EBIU_AMBCTL0_WAT  B0WAT_6
+#endif
+#if (flash_EBIU_AMBCTL_WAT == 5)
+#define flash_EBIU_AMBCTL0_WAT  B0WAT_5
+#endif
+#if (flash_EBIU_AMBCTL_WAT == 4)
+#define flash_EBIU_AMBCTL0_WAT  B0WAT_4
+#endif
+#if (flash_EBIU_AMBCTL_WAT == 3)
+#define flash_EBIU_AMBCTL0_WAT  B0WAT_3
+#endif
+#if (flash_EBIU_AMBCTL_WAT == 2)
+#define flash_EBIU_AMBCTL0_WAT  B0WAT_2
+#endif
+#if (flash_EBIU_AMBCTL_WAT == 1)
+#define flash_EBIU_AMBCTL0_WAT  B0WAT_1
+#endif
+
+#if (flash_EBIU_AMBCTL_RAT > 14)
+#define flash_EBIU_AMBCTL0_RAT  B0RAT_15
+#endif
+#if (flash_EBIU_AMBCTL_RAT == 14)
+#define flash_EBIU_AMBCTL0_RAT  B0RAT_14
+#endif
+#if (flash_EBIU_AMBCTL_RAT == 13)
+#define flash_EBIU_AMBCTL0_RAT  B0RAT_13
+#endif
+#if (flash_EBIU_AMBCTL_RAT == 12)
+#define flash_EBIU_AMBCTL0_RAT  B0RAT_12
+#endif
+#if (flash_EBIU_AMBCTL_RAT == 11)
+#define flash_EBIU_AMBCTL0_RAT  B0RAT_11
+#endif
+#if (flash_EBIU_AMBCTL_RAT == 10)
+#define flash_EBIU_AMBCTL0_RAT  B0RAT_10
+#endif
+#if (flash_EBIU_AMBCTL_RAT == 9)
+#define flash_EBIU_AMBCTL0_RAT  B0RAT_9
+#endif
+#if (flash_EBIU_AMBCTL_RAT == 8)
+#define flash_EBIU_AMBCTL0_RAT  B0RAT_8
+#endif
+#if (flash_EBIU_AMBCTL_RAT == 7)
+#define flash_EBIU_AMBCTL0_RAT  B0RAT_7
+#endif
+#if (flash_EBIU_AMBCTL_RAT == 6)
+#define flash_EBIU_AMBCTL0_RAT  B0RAT_6
+#endif
+#if (flash_EBIU_AMBCTL_RAT == 5)
+#define flash_EBIU_AMBCTL0_RAT  B0RAT_5
+#endif
+#if (flash_EBIU_AMBCTL_RAT == 4)
+#define flash_EBIU_AMBCTL0_RAT  B0RAT_4
+#endif
+#if (flash_EBIU_AMBCTL_RAT == 3)
+#define flash_EBIU_AMBCTL0_RAT  B0RAT_3
+#endif
+#if (flash_EBIU_AMBCTL_RAT == 2)
+#define flash_EBIU_AMBCTL0_RAT  B0RAT_2
+#endif
+#if (flash_EBIU_AMBCTL_RAT == 1)
+#define flash_EBIU_AMBCTL0_RAT  B0RAT_1
+#endif
+
+#define flash_EBIU_AMBCTL0  \
+	(flash_EBIU_AMBCTL0_WAT | flash_EBIU_AMBCTL0_RAT | flash_EBIU_AMBCTL0_HT | \
+	 flash_EBIU_AMBCTL0_ST | flash_EBIU_AMBCTL0_TT | CONFIG_FLASH_SPEED_RDYEN)
diff --git a/arch/blackfin/mach-bf533/include/mach/mem_map.h b/arch/blackfin/mach-bf533/include/mach/mem_map.h
new file mode 100644
index 000000000000..581fc6eea789
--- /dev/null
+++ b/arch/blackfin/mach-bf533/include/mach/mem_map.h
@@ -0,0 +1,171 @@
+/*
+ * File:         include/asm-blackfin/mach-bf533/mem_map.h
+ * Based on:
+ * Author:
+ *
+ * Created:
+ * Description:
+ *
+ * Rev:
+ *
+ * Modified:
+ *
+ * Bugs:         Enter bugs at http://blackfin.uclinux.org/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; see the file COPYING.
+ * If not, write to the Free Software Foundation,
+ * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ */
+
+#ifndef _MEM_MAP_533_H_
+#define _MEM_MAP_533_H_
+
+#define COREMMR_BASE           0xFFE00000	 /* Core MMRs */
+#define SYSMMR_BASE            0xFFC00000	 /* System MMRs */
+
+/* Async Memory Banks */
+#define ASYNC_BANK3_BASE	0x20300000	 /* Async Bank 3 */
+#define ASYNC_BANK3_SIZE	0x00100000	/* 1M */
+#define ASYNC_BANK2_BASE	0x20200000	 /* Async Bank 2 */
+#define ASYNC_BANK2_SIZE	0x00100000	/* 1M */
+#define ASYNC_BANK1_BASE	0x20100000	 /* Async Bank 1 */
+#define ASYNC_BANK1_SIZE	0x00100000	/* 1M */
+#define ASYNC_BANK0_BASE	0x20000000	 /* Async Bank 0 */
+#define ASYNC_BANK0_SIZE	0x00100000	/* 1M */
+
+/* Boot ROM Memory */
+
+#define BOOT_ROM_START		0xEF000000
+#define BOOT_ROM_LENGTH		0x400
+
+/* Level 1 Memory */
+
+#ifdef CONFIG_BFIN_ICACHE
+#define BFIN_ICACHESIZE	(16*1024)
+#else
+#define BFIN_ICACHESIZE	(0*1024)
+#endif
+
+/* Memory Map for ADSP-BF533 processors */
+
+#ifdef CONFIG_BF533
+#define L1_CODE_START       0xFFA00000
+#define L1_DATA_A_START     0xFF800000
+#define L1_DATA_B_START     0xFF900000
+
+#ifdef CONFIG_BFIN_ICACHE
+#define L1_CODE_LENGTH      (0x14000 - 0x4000)
+#else
+#define L1_CODE_LENGTH      0x14000
+#endif
+
+#ifdef CONFIG_BFIN_DCACHE
+
+#ifdef CONFIG_BFIN_DCACHE_BANKA
+#define DMEM_CNTR (ACACHE_BSRAM | ENDCPLB | PORT_PREF0)
+#define L1_DATA_A_LENGTH      (0x8000 - 0x4000)
+#define L1_DATA_B_LENGTH      0x8000
+#define BFIN_DCACHESIZE	(16*1024)
+#define BFIN_DSUPBANKS	1
+#else
+#define DMEM_CNTR (ACACHE_BCACHE | ENDCPLB | PORT_PREF0)
+#define L1_DATA_A_LENGTH      (0x8000 - 0x4000)
+#define L1_DATA_B_LENGTH      (0x8000 - 0x4000)
+#define BFIN_DCACHESIZE	(32*1024)
+#define BFIN_DSUPBANKS	2
+#endif
+
+#else
+#define DMEM_CNTR (ASRAM_BSRAM | ENDCPLB | PORT_PREF0)
+#define L1_DATA_A_LENGTH      0x8000
+#define L1_DATA_B_LENGTH      0x8000
+#define BFIN_DCACHESIZE	(0*1024)
+#define BFIN_DSUPBANKS	0
+#endif /*CONFIG_BFIN_DCACHE*/
+#endif
+
+/* Memory Map for ADSP-BF532 processors */
+
+#ifdef CONFIG_BF532
+#define L1_CODE_START       0xFFA08000
+#define L1_DATA_A_START     0xFF804000
+#define L1_DATA_B_START     0xFF904000
+
+#ifdef CONFIG_BFIN_ICACHE
+#define L1_CODE_LENGTH      (0xC000 - 0x4000)
+#else
+#define L1_CODE_LENGTH      0xC000
+#endif
+
+#ifdef CONFIG_BFIN_DCACHE
+
+#ifdef CONFIG_BFIN_DCACHE_BANKA
+#define DMEM_CNTR (ACACHE_BSRAM | ENDCPLB | PORT_PREF0)
+#define L1_DATA_A_LENGTH      (0x4000 - 0x4000)
+#define L1_DATA_B_LENGTH      0x4000
+#define BFIN_DCACHESIZE	(16*1024)
+#define BFIN_DSUPBANKS	1
+
+#else
+#define DMEM_CNTR (ACACHE_BCACHE | ENDCPLB | PORT_PREF0)
+#define L1_DATA_A_LENGTH      (0x4000 - 0x4000)
+#define L1_DATA_B_LENGTH      (0x4000 - 0x4000)
+#define BFIN_DCACHESIZE	(32*1024)
+#define BFIN_DSUPBANKS	2
+#endif
+
+#else
+#define DMEM_CNTR (ASRAM_BSRAM | ENDCPLB | PORT_PREF0)
+#define L1_DATA_A_LENGTH      0x4000
+#define L1_DATA_B_LENGTH      0x4000
+#define BFIN_DCACHESIZE	(0*1024)
+#define BFIN_DSUPBANKS	0
+#endif /*CONFIG_BFIN_DCACHE*/
+#endif
+
+/* Memory Map for ADSP-BF531 processors */
+
+#ifdef CONFIG_BF531
+#define L1_CODE_START       0xFFA08000
+#define L1_DATA_A_START     0xFF804000
+#define L1_DATA_B_START     0xFF904000
+#define L1_CODE_LENGTH      0x4000
+#define L1_DATA_B_LENGTH      0x0000
+
+
+#ifdef CONFIG_BFIN_DCACHE
+#define DMEM_CNTR (ACACHE_BSRAM | ENDCPLB  | PORT_PREF0)
+#define L1_DATA_A_LENGTH      (0x4000 - 0x4000)
+#define BFIN_DCACHESIZE	(16*1024)
+#define BFIN_DSUPBANKS	1
+#else
+#define DMEM_CNTR (ASRAM_BSRAM | ENDCPLB  | PORT_PREF0)
+#define L1_DATA_A_LENGTH      0x4000
+#define BFIN_DCACHESIZE	(0*1024)
+#define BFIN_DSUPBANKS	0
+#endif
+
+#endif
+
+/* Level 2 Memory - none */
+
+#define L2_START	0
+#define L2_LENGTH	0
+
+/* Scratch Pad Memory */
+
+#define L1_SCRATCH_START	0xFFB00000
+#define L1_SCRATCH_LENGTH	0x1000
+
+#endif				/* _MEM_MAP_533_H_ */
diff --git a/include/asm-blackfin/mach-bf533/portmux.h b/arch/blackfin/mach-bf533/include/mach/portmux.h
index 685a2651dcda..685a2651dcda 100644
--- a/include/asm-blackfin/mach-bf533/portmux.h
+++ b/arch/blackfin/mach-bf533/include/mach/portmux.h
diff --git a/arch/blackfin/mach-bf533/ints-priority.c b/arch/blackfin/mach-bf533/ints-priority.c
index 7d79e0f9503d..f51994b7a2b9 100644
--- a/arch/blackfin/mach-bf533/ints-priority.c
+++ b/arch/blackfin/mach-bf533/ints-priority.c
@@ -31,7 +31,7 @@
 #include <linux/irq.h>
 #include <asm/blackfin.h>
 
-void program_IAR(void)
+void __init program_IAR(void)
 {
 	/* Program the IAR0 Register with the configured priority */
 	bfin_write_SIC_IAR0(((CONFIG_PLLWAKE_ERROR - 7) << PLLWAKE_ERROR_POS) |
diff --git a/arch/blackfin/mach-bf537/boards/Kconfig b/arch/blackfin/mach-bf537/boards/Kconfig
index 7e789dbef036..42a57b0acb29 100644
--- a/arch/blackfin/mach-bf537/boards/Kconfig
+++ b/arch/blackfin/mach-bf537/boards/Kconfig
@@ -15,6 +15,12 @@ config BFIN537_BLUETECHNIX_CM
 	help
 	  CM-BF537 support for EVAL- and DEV-Board.
 
+config BFIN537_BLUETECHNIX_TCM
+	bool "Bluetechnix TCM-BF537"
+	depends on (BF537)
+	help
+	  TCM-BF537 support for EVAL- and DEV-Board.
+
 config PNAV10
 	bool "PNAV board"
 	depends on (BF537)
diff --git a/arch/blackfin/mach-bf537/boards/Makefile b/arch/blackfin/mach-bf537/boards/Makefile
index c94f7a5b8211..7168cc14afd8 100644
--- a/arch/blackfin/mach-bf537/boards/Makefile
+++ b/arch/blackfin/mach-bf537/boards/Makefile
@@ -5,5 +5,6 @@
 obj-$(CONFIG_GENERIC_BF537_BOARD)      += generic_board.o
 obj-$(CONFIG_BFIN537_STAMP)            += stamp.o
 obj-$(CONFIG_BFIN537_BLUETECHNIX_CM)   += cm_bf537.o
+obj-$(CONFIG_BFIN537_BLUETECHNIX_TCM)  += tcm_bf537.o
 obj-$(CONFIG_PNAV10)                   += pnav10.o
 obj-$(CONFIG_CAMSIG_MINOTAUR)          += minotaur.o
diff --git a/arch/blackfin/mach-bf537/boards/cm_bf537.c b/arch/blackfin/mach-bf537/boards/cm_bf537.c
index 73f2142875e2..dde14720b0ea 100644
--- a/arch/blackfin/mach-bf537/boards/cm_bf537.c
+++ b/arch/blackfin/mach-bf537/boards/cm_bf537.c
@@ -33,6 +33,7 @@
 #include <linux/platform_device.h>
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/partitions.h>
+#include <linux/mtd/physmap.h>
 #include <linux/spi/spi.h>
 #include <linux/spi/flash.h>
 #if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
@@ -56,16 +57,16 @@ const char bfin_board_name[] = "Bluetechnix CM BF537";
 #if defined(CONFIG_MTD_M25P80) || defined(CONFIG_MTD_M25P80_MODULE)
 static struct mtd_partition bfin_spi_flash_partitions[] = {
 	{
-		.name = "bootloader",
+		.name = "bootloader(spi)",
 		.size = 0x00020000,
 		.offset = 0,
 		.mask_flags = MTD_CAP_ROM
 	}, {
-		.name = "kernel",
+		.name = "linux kernel(spi)",
 		.size = 0xe0000,
 		.offset = 0x20000
 	}, {
-		.name = "file system",
+		.name = "file system(spi)",
 		.size = 0x700000,
 		.offset = 0x00100000,
 	}
@@ -307,6 +308,55 @@ static struct platform_device net2272_bfin_device = {
 };
 #endif
 
+#if defined(CONFIG_MTD_GPIO_ADDR) || defined(CONFIG_MTD_GPIO_ADDR_MODULE)
+static struct mtd_partition cm_partitions[] = {
+	{
+		.name   = "bootloader(nor)",
+		.size   = 0x40000,
+		.offset = 0,
+	}, {
+		.name   = "linux kernel(nor)",
+		.size   = 0xE0000,
+		.offset = MTDPART_OFS_APPEND,
+	}, {
+		.name   = "file system(nor)",
+		.size   = MTDPART_SIZ_FULL,
+		.offset = MTDPART_OFS_APPEND,
+	}
+};
+
+static struct physmap_flash_data cm_flash_data = {
+	.width    = 2,
+	.parts    = cm_partitions,
+	.nr_parts = ARRAY_SIZE(cm_partitions),
+};
+
+static unsigned cm_flash_gpios[] = { GPIO_PF4 };
+
+static struct resource cm_flash_resource[] = {
+	{
+		.name  = "cfi_probe",
+		.start = 0x20000000,
+		.end   = 0x201fffff,
+		.flags = IORESOURCE_MEM,
+	}, {
+		.start = (unsigned long)cm_flash_gpios,
+		.end   = ARRAY_SIZE(cm_flash_gpios),
+		.flags = IORESOURCE_IRQ,
+	}
+};
+
+static struct platform_device cm_flash_device = {
+	.name          = "gpio-addr-flash",
+	.id            = 0,
+	.dev = {
+		.platform_data = &cm_flash_data,
+	},
+	.num_resources = ARRAY_SIZE(cm_flash_resource),
+	.resource      = cm_flash_resource,
+};
+#endif
+
 #if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
 static struct resource bfin_uart_resources[] = {
 	{
@@ -395,7 +445,7 @@ static struct platform_device bfin_mac_device = {
 #endif
 
 #if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
-#define PATA_INT	64
+#define PATA_INT	IRQ_PF14
 
 static struct pata_platform_info bfin_pata_platform_data = {
 	.ioport_shift = 2,
@@ -510,6 +560,10 @@ static struct platform_device *cm_bf537_devices[] __initdata = {
 #if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
 	&bfin_pata_device,
 #endif
+
+#if defined(CONFIG_MTD_GPIO_ADDR) || defined(CONFIG_MTD_GPIO_ADDR_MODULE)
+	&cm_flash_device,
+#endif
 };
 
 static int __init cm_bf537_init(void)
diff --git a/arch/blackfin/mach-bf537/boards/generic_board.c b/arch/blackfin/mach-bf537/boards/generic_board.c
index 01b63e2ec18f..78a13d5bfd55 100644
--- a/arch/blackfin/mach-bf537/boards/generic_board.c
+++ b/arch/blackfin/mach-bf537/boards/generic_board.c
@@ -38,7 +38,6 @@
 #if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
 #include <linux/usb/isp1362.h>
 #endif
-#include <linux/ata_platform.h>
 #include <linux/irq.h>
 #include <linux/interrupt.h>
 #include <linux/usb/sl811.h>
@@ -307,16 +306,16 @@ static struct platform_device net2272_bfin_device = {
 	|| defined(CONFIG_MTD_M25P80_MODULE)
 static struct mtd_partition bfin_spi_flash_partitions[] = {
 	{
-		.name = "bootloader",
+		.name = "bootloader(spi)",
 		.size = 0x00020000,
 		.offset = 0,
 		.mask_flags = MTD_CAP_ROM
 	}, {
-		.name = "kernel",
+		.name = "linux kernel(spi)",
 		.size = 0xe0000,
 		.offset = 0x20000
 	}, {
-		.name = "file system",
+		.name = "file system(spi)",
 		.size = 0x700000,
 		.offset = 0x00100000,
 	}
@@ -619,43 +618,6 @@ static struct platform_device bfin_sport1_uart_device = {
 };
 #endif
 
-#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
-#define PATA_INT	55
-
-static struct pata_platform_info bfin_pata_platform_data = {
-	.ioport_shift = 1,
-	.irq_type = IRQF_TRIGGER_HIGH | IRQF_DISABLED,
-};
-
-static struct resource bfin_pata_resources[] = {
-	{
-		.start = 0x20314020,
-		.end = 0x2031403F,
-		.flags = IORESOURCE_MEM,
-	},
-	{
-		.start = 0x2031401C,
-		.end = 0x2031401F,
-		.flags = IORESOURCE_MEM,
-	},
-	{
-		.start = PATA_INT,
-		.end = PATA_INT,
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device bfin_pata_device = {
-	.name = "pata_platform",
-	.id = -1,
-	.num_resources = ARRAY_SIZE(bfin_pata_resources),
-	.resource = bfin_pata_resources,
-	.dev = {
-		.platform_data = &bfin_pata_platform_data,
-	}
-};
-#endif
-
 static struct platform_device *stamp_devices[] __initdata = {
 #if defined(CONFIG_BFIN_CFPCMCIA) || defined(CONFIG_BFIN_CFPCMCIA_MODULE)
 	&bfin_pcmcia_cf_device,
@@ -717,10 +679,6 @@ static struct platform_device *stamp_devices[] __initdata = {
 	&bfin_sport0_uart_device,
 	&bfin_sport1_uart_device,
 #endif
-
-#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
-	&bfin_pata_device,
-#endif
 };
 
 static int __init stamp_init(void)
@@ -732,9 +690,6 @@ static int __init stamp_init(void)
 				ARRAY_SIZE(bfin_spi_board_info));
 #endif
 
-#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
-	irq_desc[PATA_INT].status |= IRQ_NOAUTOEN;
-#endif
 	return 0;
 }
 
diff --git a/arch/blackfin/mach-bf537/boards/minotaur.c b/arch/blackfin/mach-bf537/boards/minotaur.c
index 18ddf7a52005..48c4cd2d1be6 100644
--- a/arch/blackfin/mach-bf537/boards/minotaur.c
+++ b/arch/blackfin/mach-bf537/boards/minotaur.c
@@ -100,16 +100,16 @@ static struct platform_device net2272_bfin_device = {
 
 static struct mtd_partition bfin_spi_flash_partitions[] = {
 	{
-		.name       = "uboot",
+		.name       = "bootloader(spi)",
 		.size       = PSIZE_UBOOT,
 		.offset     = 0x000000,
 		.mask_flags = MTD_CAP_ROM
 	}, {
-		.name       = "initramfs",
+		.name       = "initramfs(spi)",
 		.size       = PSIZE_INITRAMFS,
 		.offset     = PSIZE_UBOOT
 	}, {
-		.name       = "opt",
+		.name       = "opt(spi)",
 		.size       = FLASH_SIZE - (PSIZE_UBOOT + PSIZE_INITRAMFS),
 		.offset     = PSIZE_UBOOT + PSIZE_INITRAMFS,
 	}
diff --git a/arch/blackfin/mach-bf537/boards/pnav10.c b/arch/blackfin/mach-bf537/boards/pnav10.c
index 51c3bab14a69..f9174c11cbd4 100644
--- a/arch/blackfin/mach-bf537/boards/pnav10.c
+++ b/arch/blackfin/mach-bf537/boards/pnav10.c
@@ -231,16 +231,16 @@ static struct platform_device net2272_bfin_device = {
 	|| defined(CONFIG_MTD_M25P80_MODULE)
 static struct mtd_partition bfin_spi_flash_partitions[] = {
 	{
-		.name = "bootloader",
+		.name = "bootloader(spi)",
 		.size = 0x00020000,
 		.offset = 0,
 		.mask_flags = MTD_CAP_ROM
 	}, {
-		.name = "kernel",
+		.name = "linux kernel(spi)",
 		.size = 0xe0000,
 		.offset = 0x20000
 	}, {
-		.name = "file system",
+		.name = "file system(spi)",
 		.size = 0x700000,
 		.offset = 0x00100000,
 	}
diff --git a/arch/blackfin/mach-bf537/boards/stamp.c b/arch/blackfin/mach-bf537/boards/stamp.c
index 671f9d67f23a..8482d22321f3 100644
--- a/arch/blackfin/mach-bf537/boards/stamp.c
+++ b/arch/blackfin/mach-bf537/boards/stamp.c
@@ -29,9 +29,12 @@
  */
 
 #include <linux/device.h>
+#include <linux/kernel.h>
 #include <linux/platform_device.h>
 #include <linux/mtd/mtd.h>
+#include <linux/mtd/nand.h>
 #include <linux/mtd/partitions.h>
+#include <linux/mtd/plat-ram.h>
 #include <linux/mtd/physmap.h>
 #include <linux/spi/spi.h>
 #include <linux/spi/flash.h>
@@ -355,22 +358,100 @@ static struct platform_device net2272_bfin_device = {
 };
 #endif
 
+#if defined(CONFIG_MTD_NAND_PLATFORM) || defined(CONFIG_MTD_NAND_PLATFORM_MODULE)
+#ifdef CONFIG_MTD_PARTITIONS
+const char *part_probes[] = { "cmdlinepart", "RedBoot", NULL };
+
+static struct mtd_partition bfin_plat_nand_partitions[] = {
+	{
+		.name   = "linux kernel(nand)",
+		.size   = 0x400000,
+		.offset = 0,
+	}, {
+		.name   = "file system(nand)",
+		.size   = MTDPART_SIZ_FULL,
+		.offset = MTDPART_OFS_APPEND,
+	},
+};
+#endif
+
+#define BFIN_NAND_PLAT_CLE 2
+#define BFIN_NAND_PLAT_ALE 1
+static void bfin_plat_nand_cmd_ctrl(struct mtd_info *mtd, int cmd, unsigned int ctrl)
+{
+	struct nand_chip *this = mtd->priv;
+
+	if (cmd == NAND_CMD_NONE)
+		return;
+
+	if (ctrl & NAND_CLE)
+		writeb(cmd, this->IO_ADDR_W + (1 << BFIN_NAND_PLAT_CLE));
+	else
+		writeb(cmd, this->IO_ADDR_W + (1 << BFIN_NAND_PLAT_ALE));
+}
+
+#define BFIN_NAND_PLAT_READY GPIO_PF3
+static int bfin_plat_nand_dev_ready(struct mtd_info *mtd)
+{
+	return gpio_get_value(BFIN_NAND_PLAT_READY);
+}
+
+static struct platform_nand_data bfin_plat_nand_data = {
+	.chip = {
+		.chip_delay = 30,
+#ifdef CONFIG_MTD_PARTITIONS
+		.part_probe_types = part_probes,
+		.partitions = bfin_plat_nand_partitions,
+		.nr_partitions = ARRAY_SIZE(bfin_plat_nand_partitions),
+#endif
+	},
+	.ctrl = {
+		.cmd_ctrl  = bfin_plat_nand_cmd_ctrl,
+		.dev_ready = bfin_plat_nand_dev_ready,
+	},
+};
+
+#define MAX(x, y) (x > y ? x : y)
+static struct resource bfin_plat_nand_resources = {
+	.start = 0x20212000,
+	.end   = 0x20212000 + (1 << MAX(BFIN_NAND_PLAT_CLE, BFIN_NAND_PLAT_ALE)),
+	.flags = IORESOURCE_IO,
+};
+
+static struct platform_device bfin_async_nand_device = {
+	.name = "gen_nand",
+	.id = -1,
+	.num_resources = 1,
+	.resource = &bfin_plat_nand_resources,
+	.dev = {
+		.platform_data = &bfin_plat_nand_data,
+	},
+};
+
+static void bfin_plat_nand_init(void)
+{
+	gpio_request(BFIN_NAND_PLAT_READY, "bfin_nand_plat");
+}
+#else
+static void bfin_plat_nand_init(void) {}
+#endif
+
 #if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
 static struct mtd_partition stamp_partitions[] = {
 	{
-		.name       = "Bootloader",
+		.name       = "bootloader(nor)",
 		.size       = 0x40000,
 		.offset     = 0,
 	}, {
-		.name       = "Kernel",
+		.name       = "linux kernel(nor)",
 		.size       = 0xE0000,
 		.offset     = MTDPART_OFS_APPEND,
 	}, {
-		.name       = "RootFS",
+		.name       = "file system(nor)",
 		.size       = 0x400000 - 0x40000 - 0xE0000 - 0x10000,
 		.offset     = MTDPART_OFS_APPEND,
 	}, {
-		.name       = "MAC Address",
+		.name       = "MAC Address(nor)",
 		.size       = MTDPART_SIZ_FULL,
 		.offset     = 0x3F0000,
 		.mask_flags = MTD_WRITEABLE,
@@ -404,16 +485,16 @@ static struct platform_device stamp_flash_device = {
 	|| defined(CONFIG_MTD_M25P80_MODULE)
 static struct mtd_partition bfin_spi_flash_partitions[] = {
 	{
-		.name = "bootloader",
+		.name = "bootloader(spi)",
 		.size = 0x00040000,
 		.offset = 0,
 		.mask_flags = MTD_CAP_ROM
 	}, {
-		.name = "kernel",
+		.name = "linux kernel(spi)",
 		.size = 0xe0000,
 		.offset = MTDPART_OFS_APPEND,
 	}, {
-		.name = "file system",
+		.name = "file system(spi)",
 		.size = MTDPART_SIZ_FULL,
 		.offset = MTDPART_OFS_APPEND,
 	}
@@ -503,6 +584,30 @@ static struct bfin5xx_spi_chip spidev_chip_info = {
 
 #if defined(CONFIG_MTD_DATAFLASH) \
 	|| defined(CONFIG_MTD_DATAFLASH_MODULE)
+
+static struct mtd_partition bfin_spi_dataflash_partitions[] = {
+	{
+		.name = "bootloader(spi)",
+		.size = 0x00040000,
+		.offset = 0,
+		.mask_flags = MTD_CAP_ROM
+	}, {
+		.name = "linux kernel(spi)",
+		.size = 0xe0000,
+		.offset = MTDPART_OFS_APPEND,
+	}, {
+		.name = "file system(spi)",
+		.size = MTDPART_SIZ_FULL,
+		.offset = MTDPART_OFS_APPEND,
+	}
+};
+
+static struct flash_platform_data bfin_spi_dataflash_data = {
+	.name = "SPI Dataflash",
+	.parts = bfin_spi_dataflash_partitions,
+	.nr_parts = ARRAY_SIZE(bfin_spi_dataflash_partitions),
+};
+
 /* DataFlash chip */
 static struct bfin5xx_spi_chip data_flash_chip_info = {
 	.enable_dma = 0,         /* use dma transfer with this chip*/
@@ -528,9 +633,10 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
 	|| defined(CONFIG_MTD_DATAFLASH_MODULE)
 	{	/* DataFlash chip */
 		.modalias = "mtd_dataflash",
-		.max_speed_hz = 25000000,     /* max spi clock (SCK) speed in HZ */
+		.max_speed_hz = 33250000,     /* max spi clock (SCK) speed in HZ */
 		.bus_num = 0, /* Framework bus number */
 		.chip_select = 1, /* Framework chip select. On STAMP537 it is SPISSEL1*/
+		.platform_data = &bfin_spi_dataflash_data,
 		.controller_data = &data_flash_chip_info,
 		.mode = SPI_MODE_3,
 	},
@@ -780,7 +886,7 @@ static struct platform_device bfin_sport1_uart_device = {
 #endif
 
 #if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
-#define PATA_INT	55
+#define PATA_INT	IRQ_PF5
 
 static struct pata_platform_info bfin_pata_platform_data = {
 	.ioport_shift = 1,
@@ -922,6 +1028,10 @@ static struct platform_device *stamp_devices[] __initdata = {
 
 	&bfin_gpios_device,
 
+#if defined(CONFIG_MTD_NAND_PLATFORM) || defined(CONFIG_MTD_NAND_PLATFORM_MODULE)
+	&bfin_async_nand_device,
+#endif
+
 #if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
 	&stamp_flash_device,
 #endif
@@ -936,6 +1046,7 @@ static int __init stamp_init(void)
 				ARRAY_SIZE(bfin_i2c_board_info));
 #endif
 
+	bfin_plat_nand_init();
 	platform_add_devices(stamp_devices, ARRAY_SIZE(stamp_devices));
 	spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info));
 
diff --git a/arch/blackfin/mach-bf537/boards/tcm_bf537.c b/arch/blackfin/mach-bf537/boards/tcm_bf537.c
new file mode 100644
index 000000000000..d5ff705a5129
--- /dev/null
+++ b/arch/blackfin/mach-bf537/boards/tcm_bf537.c
@@ -0,0 +1,590 @@
+/*
+ * File:         arch/blackfin/mach-bf537/boards/tcm_bf537.c
+ * Based on:     arch/blackfin/mach-bf533/boards/cm_bf537.c
+ * Author:       Aidan Williams <aidan@nicta.com.au>
+ *
+ * Created:      2005
+ * Description:  Board description file
+ *
+ * Modified:
+ *               Copyright 2005 National ICT Australia (NICTA)
+ *               Copyright 2004-2006 Analog Devices Inc.
+ *
+ * Bugs:         Enter bugs at http://blackfin.uclinux.org/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see the file COPYING, or write
+ * to the Free Software Foundation, Inc.,
+ * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ */
+
+#include <linux/device.h>
+#include <linux/etherdevice.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/physmap.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/flash.h>
+#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
+#include <linux/usb/isp1362.h>
+#endif
+#include <linux/ata_platform.h>
+#include <linux/irq.h>
+#include <asm/dma.h>
+#include <asm/bfin5xx_spi.h>
+#include <asm/portmux.h>
+#include <asm/dpmc.h>
+
+/*
+ * Name the Board for the /proc/cpuinfo
+ */
+const char bfin_board_name[] = "Bluetechnix TCM BF537";
+
+#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
+/* all SPI peripherals info goes here */
+
+#if defined(CONFIG_MTD_M25P80) || defined(CONFIG_MTD_M25P80_MODULE)
+static struct mtd_partition bfin_spi_flash_partitions[] = {
+	{
+		.name = "bootloader(spi)",
+		.size = 0x00020000,
+		.offset = 0,
+		.mask_flags = MTD_CAP_ROM
+	}, {
+		.name = "linux kernel(spi)",
+		.size = 0xe0000,
+		.offset = 0x20000
+	}, {
+		.name = "file system(spi)",
+		.size = 0x700000,
+		.offset = 0x00100000,
+	}
+};
+
+static struct flash_platform_data bfin_spi_flash_data = {
+	.name = "m25p80",
+	.parts = bfin_spi_flash_partitions,
+	.nr_parts = ARRAY_SIZE(bfin_spi_flash_partitions),
+	.type = "m25p64",
+};
+
+/* SPI flash chip (m25p64) */
+static struct bfin5xx_spi_chip spi_flash_chip_info = {
+	.enable_dma = 0,         /* use dma transfer with this chip*/
+	.bits_per_word = 8,
+};
+#endif
+
+#if defined(CONFIG_SPI_ADC_BF533) || defined(CONFIG_SPI_ADC_BF533_MODULE)
+/* SPI ADC chip */
+static struct bfin5xx_spi_chip spi_adc_chip_info = {
+	.enable_dma = 1,         /* use dma transfer with this chip*/
+	.bits_per_word = 16,
+};
+#endif
+
+#if defined(CONFIG_SND_BLACKFIN_AD1836) || defined(CONFIG_SND_BLACKFIN_AD1836_MODULE)
+static struct bfin5xx_spi_chip ad1836_spi_chip_info = {
+	.enable_dma = 0,
+	.bits_per_word = 16,
+};
+#endif
+
+#if defined(CONFIG_AD9960) || defined(CONFIG_AD9960_MODULE)
+static struct bfin5xx_spi_chip ad9960_spi_chip_info = {
+	.enable_dma = 0,
+	.bits_per_word = 16,
+};
+#endif
+
+#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
+static struct bfin5xx_spi_chip spi_mmc_chip_info = {
+	.enable_dma = 1,
+	.bits_per_word = 8,
+};
+#endif
+
+static struct spi_board_info bfin_spi_board_info[] __initdata = {
+#if defined(CONFIG_MTD_M25P80) || defined(CONFIG_MTD_M25P80_MODULE)
+	{
+		/* the modalias must be the same as spi device driver name */
+		.modalias = "m25p80", /* Name of spi_driver for this device */
+		.max_speed_hz = 25000000,     /* max spi clock (SCK) speed in HZ */
+		.bus_num = 0, /* Framework bus number */
+		.chip_select = 1, /* Framework chip select. On STAMP537 it is SPISSEL1*/
+		.platform_data = &bfin_spi_flash_data,
+		.controller_data = &spi_flash_chip_info,
+		.mode = SPI_MODE_3,
+	},
+#endif
+
+#if defined(CONFIG_SPI_ADC_BF533) || defined(CONFIG_SPI_ADC_BF533_MODULE)
+	{
+		.modalias = "bfin_spi_adc", /* Name of spi_driver for this device */
+		.max_speed_hz = 6250000,     /* max spi clock (SCK) speed in HZ */
+		.bus_num = 0, /* Framework bus number */
+		.chip_select = 1, /* Framework chip select. */
+		.platform_data = NULL, /* No spi_driver specific config */
+		.controller_data = &spi_adc_chip_info,
+	},
+#endif
+
+#if defined(CONFIG_SND_BLACKFIN_AD1836) || defined(CONFIG_SND_BLACKFIN_AD1836_MODULE)
+	{
+		.modalias = "ad1836-spi",
+		.max_speed_hz = 3125000,     /* max spi clock (SCK) speed in HZ */
+		.bus_num = 0,
+		.chip_select = CONFIG_SND_BLACKFIN_SPI_PFBIT,
+		.controller_data = &ad1836_spi_chip_info,
+	},
+#endif
+
+#if defined(CONFIG_AD9960) || defined(CONFIG_AD9960_MODULE)
+	{
+		.modalias = "ad9960-spi",
+		.max_speed_hz = 10000000,     /* max spi clock (SCK) speed in HZ */
+		.bus_num = 0,
+		.chip_select = 1,
+		.controller_data = &ad9960_spi_chip_info,
+	},
+#endif
+
+#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
+	{
+		.modalias = "spi_mmc_dummy",
+		.max_speed_hz = 25000000,     /* max spi clock (SCK) speed in HZ */
+		.bus_num = 0,
+		.chip_select = 7,
+		.platform_data = NULL,
+		.controller_data = &spi_mmc_chip_info,
+		.mode = SPI_MODE_3,
+	},
+	{
+		.modalias = "spi_mmc",
+		.max_speed_hz = 25000000,     /* max spi clock (SCK) speed in HZ */
+		.bus_num = 0,
+		.chip_select = CONFIG_SPI_MMC_CS_CHAN,
+		.platform_data = NULL,
+		.controller_data = &spi_mmc_chip_info,
+		.mode = SPI_MODE_3,
+	},
+#endif
+};
+
+/* SPI (0) */
+static struct resource bfin_spi0_resource[] = {
+	[0] = {
+		.start = SPI0_REGBASE,
+		.end   = SPI0_REGBASE + 0xFF,
+		.flags = IORESOURCE_MEM,
+		},
+	[1] = {
+		.start = CH_SPI,
+		.end   = CH_SPI,
+		.flags = IORESOURCE_IRQ,
+	}
+};
+
+/* SPI controller data */
+static struct bfin5xx_spi_master bfin_spi0_info = {
+	.num_chipselect = 8,
+	.enable_dma = 1,  /* master has the ability to do dma transfer */
+	.pin_req = {P_SPI0_SCK, P_SPI0_MISO, P_SPI0_MOSI, 0},
+};
+
+static struct platform_device bfin_spi0_device = {
+	.name = "bfin-spi",
+	.id = 0, /* Bus number */
+	.num_resources = ARRAY_SIZE(bfin_spi0_resource),
+	.resource = bfin_spi0_resource,
+	.dev = {
+		.platform_data = &bfin_spi0_info, /* Passed to driver */
+	},
+};
+#endif  /* spi master and devices */
+
+#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
+static struct platform_device rtc_device = {
+	.name = "rtc-bfin",
+	.id   = -1,
+};
+#endif
+
+#if defined(CONFIG_FB_HITACHI_TX09) || defined(CONFIG_FB_HITACHI_TX09_MODULE)
+static struct platform_device hitachi_fb_device = {
+	.name = "hitachi-tx09",
+};
+#endif
+
+#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
+static struct resource smc91x_resources[] = {
+	{
+		.start = 0x20200300,
+		.end = 0x20200300 + 16,
+		.flags = IORESOURCE_MEM,
+	}, {
+		.start = IRQ_PF14,
+		.end = IRQ_PF14,
+		.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
+		},
+};
+
+static struct platform_device smc91x_device = {
+	.name = "smc91x",
+	.id = 0,
+	.num_resources = ARRAY_SIZE(smc91x_resources),
+	.resource = smc91x_resources,
+};
+#endif
+
+#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
+static struct resource isp1362_hcd_resources[] = {
+	{
+		.start = 0x20308000,
+		.end = 0x20308000,
+		.flags = IORESOURCE_MEM,
+	}, {
+		.start = 0x20308004,
+		.end = 0x20308004,
+		.flags = IORESOURCE_MEM,
+	}, {
+		.start = IRQ_PG15,
+		.end = IRQ_PG15,
+		.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
+	},
+};
+
+static struct isp1362_platform_data isp1362_priv = {
+	.sel15Kres = 1,
+	.clknotstop = 0,
+	.oc_enable = 0,
+	.int_act_high = 0,
+	.int_edge_triggered = 0,
+	.remote_wakeup_connected = 0,
+	.no_power_switching = 1,
+	.power_switching_mode = 0,
+};
+
+static struct platform_device isp1362_hcd_device = {
+	.name = "isp1362-hcd",
+	.id = 0,
+	.dev = {
+		.platform_data = &isp1362_priv,
+	},
+	.num_resources = ARRAY_SIZE(isp1362_hcd_resources),
+	.resource = isp1362_hcd_resources,
+};
+#endif
+
+#if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE)
+static struct resource net2272_bfin_resources[] = {
+	{
+		.start = 0x20200000,
+		.end = 0x20200000 + 0x100,
+		.flags = IORESOURCE_MEM,
+	}, {
+		.start = IRQ_PH14,
+		.end = IRQ_PH14,
+		.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
+	},
+};
+
+static struct platform_device net2272_bfin_device = {
+	.name = "net2272",
+	.id = -1,
+	.num_resources = ARRAY_SIZE(net2272_bfin_resources),
+	.resource = net2272_bfin_resources,
+};
+#endif
+
+#if defined(CONFIG_MTD_GPIO_ADDR) || defined(CONFIG_MTD_GPIO_ADDR_MODULE)
+static struct mtd_partition cm_partitions[] = {
+	{
+		.name   = "bootloader(nor)",
+		.size   = 0x40000,
+		.offset = 0,
+	}, {
+		.name   = "linux kernel(nor)",
+		.size   = 0xE0000,
+		.offset = MTDPART_OFS_APPEND,
+	}, {
+		.name   = "file system(nor)",
+		.size   = MTDPART_SIZ_FULL,
+		.offset = MTDPART_OFS_APPEND,
+	}
+};
+
+static struct physmap_flash_data cm_flash_data = {
+	.width    = 2,
+	.parts    = cm_partitions,
+	.nr_parts = ARRAY_SIZE(cm_partitions),
+};
+
+static unsigned cm_flash_gpios[] = { GPIO_PF4, GPIO_PF5 };
+
+static struct resource cm_flash_resource[] = {
+	{
+		.name  = "cfi_probe",
+		.start = 0x20000000,
+		.end   = 0x201fffff,
+		.flags = IORESOURCE_MEM,
+	}, {
+		.start = (unsigned long)cm_flash_gpios,
+		.end   = ARRAY_SIZE(cm_flash_gpios),
+		.flags = IORESOURCE_IRQ,
+	}
+};
+
+static struct platform_device cm_flash_device = {
+	.name          = "gpio-addr-flash",
+	.id            = 0,
+	.dev = {
+		.platform_data = &cm_flash_data,
+	},
+	.num_resources = ARRAY_SIZE(cm_flash_resource),
+	.resource      = cm_flash_resource,
+};
+#endif
+
+#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
+static struct resource bfin_uart_resources[] = {
+	{
+		.start = 0xFFC00400,
+		.end = 0xFFC004FF,
+		.flags = IORESOURCE_MEM,
+	}, {
+		.start = 0xFFC02000,
+		.end = 0xFFC020FF,
+		.flags = IORESOURCE_MEM,
+	},
+};
+
+static struct platform_device bfin_uart_device = {
+	.name = "bfin-uart",
+	.id = 1,
+	.num_resources = ARRAY_SIZE(bfin_uart_resources),
+	.resource = bfin_uart_resources,
+};
+#endif
+
+#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
+static struct resource bfin_sir_resources[] = {
+#ifdef CONFIG_BFIN_SIR0
+	{
+		.start = 0xFFC00400,
+		.end = 0xFFC004FF,
+		.flags = IORESOURCE_MEM,
+	},
+#endif
+#ifdef CONFIG_BFIN_SIR1
+	{
+		.start = 0xFFC02000,
+		.end = 0xFFC020FF,
+		.flags = IORESOURCE_MEM,
+	},
+#endif
+};
+
+static struct platform_device bfin_sir_device = {
+	.name = "bfin_sir",
+	.id = 0,
+	.num_resources = ARRAY_SIZE(bfin_sir_resources),
+	.resource = bfin_sir_resources,
+};
+#endif
+
+#if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE)
+static struct resource bfin_twi0_resource[] = {
+	[0] = {
+		.start = TWI0_REGBASE,
+		.end   = TWI0_REGBASE,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = IRQ_TWI,
+		.end   = IRQ_TWI,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device i2c_bfin_twi_device = {
+	.name = "i2c-bfin-twi",
+	.id = 0,
+	.num_resources = ARRAY_SIZE(bfin_twi0_resource),
+	.resource = bfin_twi0_resource,
+};
+#endif
+
+#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
+static struct platform_device bfin_sport0_uart_device = {
+	.name = "bfin-sport-uart",
+	.id = 0,
+};
+
+static struct platform_device bfin_sport1_uart_device = {
+	.name = "bfin-sport-uart",
+	.id = 1,
+};
+#endif
+
+#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
+static struct platform_device bfin_mac_device = {
+	.name = "bfin_mac",
+};
+#endif
+
+#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
+#define PATA_INT	IRQ_PF14
+
+static struct pata_platform_info bfin_pata_platform_data = {
+	.ioport_shift = 2,
+	.irq_type = IRQF_TRIGGER_HIGH | IRQF_DISABLED,
+};
+
+static struct resource bfin_pata_resources[] = {
+	{
+		.start = 0x2030C000,
+		.end = 0x2030C01F,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = 0x2030D018,
+		.end = 0x2030D01B,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = PATA_INT,
+		.end = PATA_INT,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device bfin_pata_device = {
+	.name = "pata_platform",
+	.id = -1,
+	.num_resources = ARRAY_SIZE(bfin_pata_resources),
+	.resource = bfin_pata_resources,
+	.dev = {
+		.platform_data = &bfin_pata_platform_data,
+	}
+};
+#endif
+
+static const unsigned int cclk_vlev_datasheet[] =
+{
+	VRPAIR(VLEV_085, 250000000),
+	VRPAIR(VLEV_090, 376000000),
+	VRPAIR(VLEV_095, 426000000),
+	VRPAIR(VLEV_100, 426000000),
+	VRPAIR(VLEV_105, 476000000),
+	VRPAIR(VLEV_110, 476000000),
+	VRPAIR(VLEV_115, 476000000),
+	VRPAIR(VLEV_120, 500000000),
+	VRPAIR(VLEV_125, 533000000),
+	VRPAIR(VLEV_130, 600000000),
+};
+
+static struct bfin_dpmc_platform_data bfin_dmpc_vreg_data = {
+	.tuple_tab = cclk_vlev_datasheet,
+	.tabsize = ARRAY_SIZE(cclk_vlev_datasheet),
+	.vr_settling_time = 25 /* us */,
+};
+
+static struct platform_device bfin_dpmc = {
+	.name = "bfin dpmc",
+	.dev = {
+		.platform_data = &bfin_dmpc_vreg_data,
+	},
+};
+
+static struct platform_device *cm_bf537_devices[] __initdata = {
+
+	&bfin_dpmc,
+
+#if defined(CONFIG_FB_HITACHI_TX09) || defined(CONFIG_FB_HITACHI_TX09_MODULE)
+	&hitachi_fb_device,
+#endif
+
+#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
+	&rtc_device,
+#endif
+
+#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
+	&bfin_uart_device,
+#endif
+
+#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
+	&bfin_sir_device,
+#endif
+
+#if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE)
+	&i2c_bfin_twi_device,
+#endif
+
+#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
+	&bfin_sport0_uart_device,
+	&bfin_sport1_uart_device,
+#endif
+
+#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
+	&isp1362_hcd_device,
+#endif
+
+#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
+	&smc91x_device,
+#endif
+
+#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
+	&bfin_mac_device,
+#endif
+
+#if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE)
+	&net2272_bfin_device,
+#endif
+
+#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
+	&bfin_spi0_device,
+#endif
+
+#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
+	&bfin_pata_device,
+#endif
+
+#if defined(CONFIG_MTD_GPIO_ADDR) || defined(CONFIG_MTD_GPIO_ADDR_MODULE)
+	&cm_flash_device,
+#endif
+};
+
+static int __init cm_bf537_init(void)
+{
+	printk(KERN_INFO "%s(): registering device resources\n", __func__);
+	platform_add_devices(cm_bf537_devices, ARRAY_SIZE(cm_bf537_devices));
+#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
+	spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info));
+#endif
+
+#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
+	irq_desc[PATA_INT].status |= IRQ_NOAUTOEN;
+#endif
+	return 0;
+}
+
+arch_initcall(cm_bf537_init);
+
+void bfin_get_ether_addr(char *addr)
+{
+	random_ether_addr(addr);
+	printk(KERN_WARNING "%s:%s: Setting Ethernet MAC to a random one\n", __FILE__, __func__);
+}
+EXPORT_SYMBOL(bfin_get_ether_addr);
diff --git a/arch/blackfin/mach-bf537/head.S b/arch/blackfin/mach-bf537/head.S
index 48cd58a410a0..12eb5cc571d0 100644
--- a/arch/blackfin/mach-bf537/head.S
+++ b/arch/blackfin/mach-bf537/head.S
@@ -30,327 +30,13 @@
 #include <linux/linkage.h>
 #include <linux/init.h>
 #include <asm/blackfin.h>
-#include <asm/trace.h>
-
-#if CONFIG_BFIN_KERNEL_CLOCK
-#include <asm/mach-common/clocks.h>
-#include <asm/mach/mem_init.h>
-#endif
-
-.extern ___bss_stop
-.extern ___bss_start
-.extern _bf53x_relocate_l1_mem
-
-#define INITIAL_STACK	0xFFB01000
-
-__INIT
-
-ENTRY(__start)
-	/* R0: argument of command line string, passed from uboot, save it */
-	R7 = R0;
-	/* Enable Cycle Counter and Nesting Of Interrupts */
-#ifdef CONFIG_BFIN_SCRATCH_REG_CYCLES
-	R0 = SYSCFG_SNEN;
-#else
-	R0 = SYSCFG_SNEN | SYSCFG_CCEN;
-#endif
-	SYSCFG = R0;
-	R0 = 0;
-
-	/* Clear Out All the data and pointer Registers */
-	R1 = R0;
-	R2 = R0;
-	R3 = R0;
-	R4 = R0;
-	R5 = R0;
-	R6 = R0;
-
-	P0 = R0;
-	P1 = R0;
-	P2 = R0;
-	P3 = R0;
-	P4 = R0;
-	P5 = R0;
-
-	LC0 = r0;
-	LC1 = r0;
-	L0 = r0;
-	L1 = r0;
-	L2 = r0;
-	L3 = r0;
-
-	/* Clear Out All the DAG Registers */
-	B0 = r0;
-	B1 = r0;
-	B2 = r0;
-	B3 = r0;
-
-	I0 = r0;
-	I1 = r0;
-	I2 = r0;
-	I3 = r0;
-
-	M0 = r0;
-	M1 = r0;
-	M2 = r0;
-	M3 = r0;
-
-	trace_buffer_init(p0,r0);
-	P0 = R1;
-	R0 = R1;
-
-	/* Turn off the icache */
-	p0.l = LO(IMEM_CONTROL);
-	p0.h = HI(IMEM_CONTROL);
-	R1 = [p0];
-	R0 = ~ENICPLB;
-	R0 = R0 & R1;
-
-	/* Anomaly 05000125 */
-#if ANOMALY_05000125
-	CLI R2;
-	SSYNC;
-#endif
-	[p0] = R0;
-	SSYNC;
-#if ANOMALY_05000125
-	STI R2;
-#endif
-
-	/* Turn off the dcache */
-	p0.l = LO(DMEM_CONTROL);
-	p0.h = HI(DMEM_CONTROL);
-	R1 = [p0];
-	R0 = ~ENDCPLB;
-	R0 = R0 & R1;
-
-	/* Anomaly 05000125 */
-#if ANOMALY_05000125
-	CLI R2;
-	SSYNC;
-#endif
-	[p0] = R0;
-	SSYNC;
-#if ANOMALY_05000125
-	STI R2;
-#endif
-
-	/* Initialise General-Purpose I/O Modules on BF537 */
-	/* Rev 0.0 Anomaly 05000212 - PORTx_FER,
-	 * PORT_MUX Registers Do Not accept "writes" correctly:
-	 */
-	p0.h = hi(BFIN_PORT_MUX);
-	p0.l = lo(BFIN_PORT_MUX);
-#if ANOMALY_05000212
-	R0.L = W[P0]; /* Read */
-	SSYNC;
-#endif
-	R0 = (PGDE_UART | PFTE_UART)(Z);
-#if ANOMALY_05000212
-	W[P0] = R0.L; /* Write */
-	SSYNC;
-#endif
-	W[P0] = R0.L; /* Enable both UARTS */
-	SSYNC;
-
-	p0.h = hi(PORTF_FER);
-	p0.l = lo(PORTF_FER);
-#if ANOMALY_05000212
-	R0.L = W[P0]; /* Read */
-	SSYNC;
-#endif
-	R0 = 0x000F(Z);
-#if ANOMALY_05000212
-	W[P0] = R0.L; /* Write */
-	SSYNC;
-#endif
-	/* Enable peripheral function of PORTF for UART0 and UART1 */
-	W[P0] = R0.L;
-	SSYNC;
-
-#if !defined(CONFIG_BF534)
-	p0.h = hi(EMAC_SYSTAT);
-	p0.l = lo(EMAC_SYSTAT);
-	R0.h = 0xFFFF; /* Clear EMAC Interrupt Status bits */
-	R0.l = 0xFFFF;
-	[P0] = R0;
-	SSYNC;
-#endif
-
-	/* Initialise UART - when booting from u-boot, the UART is not disabled
-	 * so if we dont initalize here, our serial console gets hosed */
-	p0.h = hi(BFIN_UART_LCR);
-	p0.l = lo(BFIN_UART_LCR);
-	r0 = 0x0(Z);
-	w[p0] = r0.L;	/* To enable DLL writes */
-	ssync;
-
-	p0.h = hi(BFIN_UART_DLL);
-	p0.l = lo(BFIN_UART_DLL);
-	r0 = 0x0(Z);
-	w[p0] = r0.L;
-	ssync;
-
-	p0.h = hi(BFIN_UART_DLH);
-	p0.l = lo(BFIN_UART_DLH);
-	r0 = 0x00(Z);
-	w[p0] = r0.L;
-	ssync;
-
-	p0.h = hi(BFIN_UART_GCTL);
-	p0.l = lo(BFIN_UART_GCTL);
-	r0 = 0x0(Z);
-	w[p0] = r0.L;	/* To enable UART clock */
-	ssync;
-
-	/* Initialize stack pointer */
-	sp.l = lo(INITIAL_STACK);
-	sp.h = hi(INITIAL_STACK);
-	fp = sp;
-	usp = sp;
-
-#ifdef CONFIG_EARLY_PRINTK
-	SP += -12;
-	call _init_early_exception_vectors;
-	SP += 12;
-#endif
-
-	/* Put The Code for PLL Programming and SDRAM Programming in L1 ISRAM */
-	call _bf53x_relocate_l1_mem;
-#if CONFIG_BFIN_KERNEL_CLOCK
-	call _start_dma_code;
-#endif
-
-	/* Code for initializing Async memory banks */
-
-	p2.h = hi(EBIU_AMBCTL1);
-	p2.l = lo(EBIU_AMBCTL1);
-	r0.h = hi(AMBCTL1VAL);
-	r0.l = lo(AMBCTL1VAL);
-	[p2] = r0;
-	ssync;
-
-	p2.h = hi(EBIU_AMBCTL0);
-	p2.l = lo(EBIU_AMBCTL0);
-	r0.h = hi(AMBCTL0VAL);
-	r0.l = lo(AMBCTL0VAL);
-	[p2] = r0;
-	ssync;
-
-	p2.h = hi(EBIU_AMGCTL);
-	p2.l = lo(EBIU_AMGCTL);
-	r0 = AMGCTLVAL;
-	w[p2] = r0;
-	ssync;
-
-	/* This section keeps the processor in supervisor mode
-	 * during kernel boot.  Switches to user mode at end of boot.
-	 * See page 3-9 of Hardware Reference manual for documentation.
-	 */
-
-	/* EVT15 = _real_start */
-
-	p0.l = lo(EVT15);
-	p0.h = hi(EVT15);
-	p1.l = _real_start;
-	p1.h = _real_start;
-	[p0] = p1;
-	csync;
-
-	p0.l = lo(IMASK);
-	p0.h = hi(IMASK);
-	p1.l = IMASK_IVG15;
-	p1.h = 0x0;
-	[p0] = p1;
-	csync;
-
-	raise 15;
-	p0.l = .LWAIT_HERE;
-	p0.h = .LWAIT_HERE;
-	reti = p0;
-#if ANOMALY_05000281
-	nop; nop; nop;
+#ifdef CONFIG_BFIN_KERNEL_CLOCK
+#include <asm/clocks.h>
+#include <mach/mem_init.h>
 #endif
-	rti;
-
-.LWAIT_HERE:
-	jump .LWAIT_HERE;
-ENDPROC(__start)
-
-ENTRY(_real_start)
-	[ -- sp ] = reti;
-	p0.l = lo(WDOG_CTL);
-	p0.h = hi(WDOG_CTL);
-	r0 = 0xAD6(z);
-	w[p0] = r0;	/* watchdog off for now */
-	ssync;
-
-	/* Code update for BSS size == 0
-	 * Zero out the bss region.
-	 */
-
-	p1.l = ___bss_start;
-	p1.h = ___bss_start;
-	p2.l = ___bss_stop;
-	p2.h = ___bss_stop;
-	r0 = 0;
-	p2 -= p1;
-	lsetup (.L_clear_bss, .L_clear_bss) lc0 = p2;
-.L_clear_bss:
-	B[p1++] = r0;
-
-	/* In case there is a NULL pointer reference
-	 * Zero out region before stext
-	 */
-
-	p1.l = 0x0;
-	p1.h = 0x0;
-	r0.l = __stext;
-	r0.h = __stext;
-	r0 = r0 >> 1;
-	p2 = r0;
-	r0 = 0;
-	lsetup (.L_clear_zero, .L_clear_zero) lc0 = p2;
-.L_clear_zero:
-	W[p1++] = r0;
-
-	/* pass the uboot arguments to the global value command line */
-	R0 = R7;
-	call _cmdline_init;
-
-	p1.l = __rambase;
-	p1.h = __rambase;
-	r0.l = __sdata;
-	r0.h = __sdata;
-	[p1] = r0;
-
-	p1.l = __ramstart;
-	p1.h = __ramstart;
-	p3.l = ___bss_stop;
-	p3.h = ___bss_stop;
-
-	r1 = p3;
-	[p1] = r1;
-
-	/*
-	 * load the current thread pointer and stack
-	 */
-	r1.l = _init_thread_union;
-	r1.h = _init_thread_union;
-
-	r2.l = 0x2000;
-	r2.h = 0x0000;
-	r1 = r1 + r2;
-	sp = r1;
-	usp = sp;
-	fp = sp;
-	jump.l _start_kernel;
-ENDPROC(_real_start)
-
-__FINIT
 
 .section .l1.text
-#if CONFIG_BFIN_KERNEL_CLOCK
+#ifdef CONFIG_BFIN_KERNEL_CLOCK
 ENTRY(_start_dma_code)
 
 	/* Enable PHY CLK buffer output */
@@ -430,12 +116,6 @@ ENTRY(_start_dma_code)
 	w[p0] = r0.l;
 	ssync;
 
-	p0.l = LO(EBIU_SDBCTL);
-	p0.h = HI(EBIU_SDBCTL);     /* SDRAM Memory Bank Control Register */
-	r0 = mem_SDBCTL;
-	w[p0] = r0.l;
-	ssync;
-
 	P2.H = hi(EBIU_SDGCTL);
 	P2.L = lo(EBIU_SDGCTL);
 	R0 = [P2];
@@ -458,13 +138,6 @@ ENTRY(_start_dma_code)
 	[P2] = R1;
 	SSYNC;
 
-	p0.h = hi(SIC_IWR);
-	p0.l = lo(SIC_IWR);
-	r0.l = lo(IWR_ENABLE_ALL);
-	r0.h = hi(IWR_ENABLE_ALL);
-	[p0] = r0;
-	SSYNC;
-
 	RTS;
 ENDPROC(_start_dma_code)
 #endif /* CONFIG_BFIN_KERNEL_CLOCK */
diff --git a/include/asm-blackfin/mach-bf537/anomaly.h b/arch/blackfin/mach-bf537/include/mach/anomaly.h
index 8460ab9c324f..8460ab9c324f 100644
--- a/include/asm-blackfin/mach-bf537/anomaly.h
+++ b/arch/blackfin/mach-bf537/include/mach/anomaly.h
diff --git a/include/asm-blackfin/mach-bf537/bf537.h b/arch/blackfin/mach-bf537/include/mach/bf537.h
index cfe2a221112e..cfe2a221112e 100644
--- a/include/asm-blackfin/mach-bf537/bf537.h
+++ b/arch/blackfin/mach-bf537/include/mach/bf537.h
diff --git a/include/asm-blackfin/mach-bf537/bfin_serial_5xx.h b/arch/blackfin/mach-bf537/include/mach/bfin_serial_5xx.h
index 1bf56ffa22f9..1bf56ffa22f9 100644
--- a/include/asm-blackfin/mach-bf537/bfin_serial_5xx.h
+++ b/arch/blackfin/mach-bf537/include/mach/bfin_serial_5xx.h
diff --git a/arch/blackfin/mach-bf537/include/mach/bfin_sir.h b/arch/blackfin/mach-bf537/include/mach/bfin_sir.h
new file mode 100644
index 000000000000..cfd8ad4f1f2c
--- /dev/null
+++ b/arch/blackfin/mach-bf537/include/mach/bfin_sir.h
@@ -0,0 +1,142 @@
+/*
+ * Blackfin Infra-red Driver
+ *
+ * Copyright 2006-2008 Analog Devices Inc.
+ *
+ * Enter bugs at http://blackfin.uclinux.org/
+ *
+ * Licensed under the GPL-2 or later.
+ *
+ */
+
+#include <linux/serial.h>
+#include <asm/dma.h>
+#include <asm/portmux.h>
+
+#define SIR_UART_GET_CHAR(port)   bfin_read16((port)->membase + OFFSET_RBR)
+#define SIR_UART_GET_DLL(port)    bfin_read16((port)->membase + OFFSET_DLL)
+#define SIR_UART_GET_IER(port)    bfin_read16((port)->membase + OFFSET_IER)
+#define SIR_UART_GET_DLH(port)    bfin_read16((port)->membase + OFFSET_DLH)
+#define SIR_UART_GET_IIR(port)    bfin_read16((port)->membase + OFFSET_IIR)
+#define SIR_UART_GET_LCR(port)    bfin_read16((port)->membase + OFFSET_LCR)
+#define SIR_UART_GET_GCTL(port)   bfin_read16((port)->membase + OFFSET_GCTL)
+
+#define SIR_UART_PUT_CHAR(port, v) bfin_write16(((port)->membase + OFFSET_THR), v)
+#define SIR_UART_PUT_DLL(port, v)  bfin_write16(((port)->membase + OFFSET_DLL), v)
+#define SIR_UART_PUT_IER(port, v)  bfin_write16(((port)->membase + OFFSET_IER), v)
+#define SIR_UART_PUT_DLH(port, v)  bfin_write16(((port)->membase + OFFSET_DLH), v)
+#define SIR_UART_PUT_LCR(port, v)  bfin_write16(((port)->membase + OFFSET_LCR), v)
+#define SIR_UART_PUT_GCTL(port, v) bfin_write16(((port)->membase + OFFSET_GCTL), v)
+
+#ifdef CONFIG_SIR_BFIN_DMA
+struct dma_rx_buf {
+	char *buf;
+	int head;
+	int tail;
+	};
+#endif /* CONFIG_SIR_BFIN_DMA */
+
+struct bfin_sir_port {
+	unsigned char __iomem   *membase;
+	unsigned int            irq;
+	unsigned int            lsr;
+	unsigned long           clk;
+	struct net_device       *dev;
+#ifdef CONFIG_SIR_BFIN_DMA
+	int                     tx_done;
+	struct dma_rx_buf       rx_dma_buf;
+	struct timer_list       rx_dma_timer;
+	int                     rx_dma_nrows;
+#endif /* CONFIG_SIR_BFIN_DMA */
+	unsigned int            tx_dma_channel;
+	unsigned int            rx_dma_channel;
+};
+
+struct bfin_sir_port sir_ports[BFIN_UART_NR_PORTS];
+
+struct bfin_sir_port_res {
+	unsigned long   base_addr;
+	int             irq;
+	unsigned int    rx_dma_channel;
+	unsigned int    tx_dma_channel;
+};
+
+struct bfin_sir_port_res bfin_sir_port_resource[] = {
+#ifdef CONFIG_BFIN_SIR0
+	{
+	0xFFC00400,
+	IRQ_UART0_RX,
+	CH_UART0_RX,
+	CH_UART0_TX,
+	},
+#endif
+#ifdef CONFIG_BFIN_SIR1
+	{
+	0xFFC02000,
+	IRQ_UART1_RX,
+	CH_UART1_RX,
+	CH_UART1_TX,
+	},
+#endif
+};
+
+int nr_sirs = ARRAY_SIZE(bfin_sir_port_resource);
+
+struct bfin_sir_self {
+	struct bfin_sir_port    *sir_port;
+	spinlock_t              lock;
+	unsigned int            open;
+	int                     speed;
+	int                     newspeed;
+
+	struct sk_buff          *txskb;
+	struct sk_buff          *rxskb;
+	struct net_device_stats stats;
+	struct device           *dev;
+	struct irlap_cb         *irlap;
+	struct qos_info         qos;
+
+	iobuff_t                tx_buff;
+	iobuff_t                rx_buff;
+
+	struct work_struct      work;
+	int                     mtt;
+};
+
+static inline unsigned int SIR_UART_GET_LSR(struct bfin_sir_port *port)
+{
+	unsigned int lsr = bfin_read16(port->membase + OFFSET_LSR);
+	port->lsr |= (lsr & (BI|FE|PE|OE));
+	return lsr | port->lsr;
+}
+
+static inline void SIR_UART_CLEAR_LSR(struct bfin_sir_port *port)
+{
+	port->lsr = 0;
+	bfin_read16(port->membase + OFFSET_LSR);
+}
+
+#define DRIVER_NAME "bfin_sir"
+
+static int bfin_sir_hw_init(void)
+{
+	int ret = -ENODEV;
+#ifdef CONFIG_BFIN_SIR0
+	ret = peripheral_request(P_UART0_TX, DRIVER_NAME);
+	if (ret)
+		return ret;
+	ret = peripheral_request(P_UART0_RX, DRIVER_NAME);
+	if (ret)
+		return ret;
+#endif
+
+#ifdef CONFIG_BFIN_SIR1
+	ret = peripheral_request(P_UART1_TX, DRIVER_NAME);
+	if (ret)
+		return ret;
+	ret = peripheral_request(P_UART1_RX, DRIVER_NAME);
+	if (ret)
+		return ret;
+#endif
+	return ret;
+}
diff --git a/include/asm-blackfin/mach-bf537/blackfin.h b/arch/blackfin/mach-bf537/include/mach/blackfin.h
index cffc786b2a2b..cffc786b2a2b 100644
--- a/include/asm-blackfin/mach-bf537/blackfin.h
+++ b/arch/blackfin/mach-bf537/include/mach/blackfin.h
diff --git a/include/asm-blackfin/mach-bf537/cdefBF534.h b/arch/blackfin/mach-bf537/include/mach/cdefBF534.h
index 82de526f8097..88d491cd9f36 100644
--- a/include/asm-blackfin/mach-bf537/cdefBF534.h
+++ b/arch/blackfin/mach-bf537/include/mach/cdefBF534.h
@@ -38,7 +38,7 @@
 #include "defBF534.h"
 
 /* Include core specific register pointer definitions 								*/
-#include <asm/mach-common/cdef_LPBlackfin.h>
+#include <asm/cdef_LPBlackfin.h>
 
 #include <asm/system.h>
 
diff --git a/include/asm-blackfin/mach-bf537/cdefBF537.h b/arch/blackfin/mach-bf537/include/mach/cdefBF537.h
index b8fc949a991f..b8fc949a991f 100644
--- a/include/asm-blackfin/mach-bf537/cdefBF537.h
+++ b/arch/blackfin/mach-bf537/include/mach/cdefBF537.h
diff --git a/include/asm-blackfin/mach-bf537/defBF534.h b/arch/blackfin/mach-bf537/include/mach/defBF534.h
index d0d80d3152ba..a3227f9003ff 100644
--- a/include/asm-blackfin/mach-bf537/defBF534.h
+++ b/arch/blackfin/mach-bf537/include/mach/defBF534.h
@@ -32,7 +32,7 @@
 #define _DEF_BF534_H
 
 /* Include all Core registers and bit definitions */
-#include <asm/mach-common/def_LPBlackfin.h>
+#include <asm/def_LPBlackfin.h>
 
 /************************************************************************************
 ** System MMR Register Map
diff --git a/include/asm-blackfin/mach-bf537/defBF537.h b/arch/blackfin/mach-bf537/include/mach/defBF537.h
index 3f455909c418..3d6c83e31b1e 100644
--- a/include/asm-blackfin/mach-bf537/defBF537.h
+++ b/arch/blackfin/mach-bf537/include/mach/defBF537.h
@@ -33,7 +33,7 @@
 #define _DEF_BF537_H
 
 /* Include all Core registers and bit definitions*/
-#include <asm/mach-common/cdef_LPBlackfin.h>
+#include <asm/cdef_LPBlackfin.h>
 
 /* Include all MMR and bit defines common to BF534 */
 #include "defBF534.h"
@@ -290,6 +290,7 @@
 #define	PHYIE		0x00000001	/* PHY_INT Interrupt Enable                                                     */
 #define	RXDWA		0x00000002	/* Receive Frame DMA Word Alignment (Odd/Even*)         */
 #define	RXCKS		0x00000004	/* Enable RX Frame TCP/UDP Checksum Computation         */
+#define	TXDWA		0x00000010	/* Transmit Frame DMA Word Alignment (Odd/Even*)        */
 #define	MDCDIV		0x00003F00	/* SCLK:MDC Clock Divisor [MDC=SCLK/(2*(N+1))]          */
 
 #define	SET_MDCDIV(x)	(((x)&0x3F)<< 8)	/* Set MDC Clock Divisor                                */
diff --git a/include/asm-blackfin/mach-bf537/dma.h b/arch/blackfin/mach-bf537/include/mach/dma.h
index 7a964040870a..7a964040870a 100644
--- a/include/asm-blackfin/mach-bf537/dma.h
+++ b/arch/blackfin/mach-bf537/include/mach/dma.h
diff --git a/include/asm-blackfin/mach-bf537/irq.h b/arch/blackfin/mach-bf537/include/mach/irq.h
index 2e68a8a1e730..2e68a8a1e730 100644
--- a/include/asm-blackfin/mach-bf537/irq.h
+++ b/arch/blackfin/mach-bf537/include/mach/irq.h
diff --git a/arch/blackfin/mach-bf537/include/mach/mem_init.h b/arch/blackfin/mach-bf537/include/mach/mem_init.h
new file mode 100644
index 000000000000..f67698f670ca
--- /dev/null
+++ b/arch/blackfin/mach-bf537/include/mach/mem_init.h
@@ -0,0 +1,303 @@
+/*
+ * File:         include/asm-blackfin/mach-bf537/mem_init.h
+ * Based on:
+ * Author:
+ *
+ * Created:
+ * Description:
+ *
+ * Rev:
+ *
+ * Modified:
+ *               Copyright 2004-2006 Analog Devices Inc.
+ *
+ * Bugs:         Enter bugs at http://blackfin.uclinux.org/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; see the file COPYING.
+ * If not, write to the Free Software Foundation,
+ * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ */
+
+#if (CONFIG_MEM_MT48LC16M16A2TG_75 || CONFIG_MEM_MT48LC64M4A2FB_7E || CONFIG_MEM_MT48LC16M8A2TG_75 || CONFIG_MEM_GENERIC_BOARD || CONFIG_MEM_MT48LC32M8A2_75)
+#if (CONFIG_SCLK_HZ > 119402985)
+#define SDRAM_tRP       TRP_2
+#define SDRAM_tRP_num   2
+#define SDRAM_tRAS      TRAS_7
+#define SDRAM_tRAS_num  7
+#define SDRAM_tRCD      TRCD_2
+#define SDRAM_tWR       TWR_2
+#endif
+#if (CONFIG_SCLK_HZ > 104477612) && (CONFIG_SCLK_HZ <= 119402985)
+#define SDRAM_tRP       TRP_2
+#define SDRAM_tRP_num   2
+#define SDRAM_tRAS      TRAS_6
+#define SDRAM_tRAS_num  6
+#define SDRAM_tRCD      TRCD_2
+#define SDRAM_tWR       TWR_2
+#endif
+#if (CONFIG_SCLK_HZ > 89552239) && (CONFIG_SCLK_HZ <= 104477612)
+#define SDRAM_tRP       TRP_2
+#define SDRAM_tRP_num   2
+#define SDRAM_tRAS      TRAS_5
+#define SDRAM_tRAS_num  5
+#define SDRAM_tRCD      TRCD_2
+#define SDRAM_tWR       TWR_2
+#endif
+#if (CONFIG_SCLK_HZ > 74626866) && (CONFIG_SCLK_HZ <= 89552239)
+#define SDRAM_tRP       TRP_2
+#define SDRAM_tRP_num   2
+#define SDRAM_tRAS      TRAS_4
+#define SDRAM_tRAS_num  4
+#define SDRAM_tRCD      TRCD_2
+#define SDRAM_tWR       TWR_2
+#endif
+#if (CONFIG_SCLK_HZ > 66666667) && (CONFIG_SCLK_HZ <= 74626866)
+#define SDRAM_tRP       TRP_2
+#define SDRAM_tRP_num   2
+#define SDRAM_tRAS      TRAS_3
+#define SDRAM_tRAS_num  3
+#define SDRAM_tRCD      TRCD_2
+#define SDRAM_tWR       TWR_2
+#endif
+#if (CONFIG_SCLK_HZ > 59701493) && (CONFIG_SCLK_HZ <= 66666667)
+#define SDRAM_tRP       TRP_1
+#define SDRAM_tRP_num   1
+#define SDRAM_tRAS      TRAS_4
+#define SDRAM_tRAS_num  3
+#define SDRAM_tRCD      TRCD_1
+#define SDRAM_tWR       TWR_2
+#endif
+#if (CONFIG_SCLK_HZ > 44776119) && (CONFIG_SCLK_HZ <= 59701493)
+#define SDRAM_tRP       TRP_1
+#define SDRAM_tRP_num   1
+#define SDRAM_tRAS      TRAS_3
+#define SDRAM_tRAS_num  3
+#define SDRAM_tRCD      TRCD_1
+#define SDRAM_tWR       TWR_2
+#endif
+#if (CONFIG_SCLK_HZ > 29850746) && (CONFIG_SCLK_HZ <= 44776119)
+#define SDRAM_tRP       TRP_1
+#define SDRAM_tRP_num   1
+#define SDRAM_tRAS      TRAS_2
+#define SDRAM_tRAS_num  2
+#define SDRAM_tRCD      TRCD_1
+#define SDRAM_tWR       TWR_2
+#endif
+#if (CONFIG_SCLK_HZ <= 29850746)
+#define SDRAM_tRP       TRP_1
+#define SDRAM_tRP_num   1
+#define SDRAM_tRAS      TRAS_1
+#define SDRAM_tRAS_num  1
+#define SDRAM_tRCD      TRCD_1
+#define SDRAM_tWR       TWR_2
+#endif
+#endif
+
+#if (CONFIG_MEM_MT48LC16M16A2TG_75)
+  /*SDRAM INFORMATION: */
+#define SDRAM_Tref  64		/* Refresh period in milliseconds   */
+#define SDRAM_NRA   8192	/* Number of row addresses in SDRAM */
+#define SDRAM_CL    CL_3
+#endif
+
+#if (CONFIG_MEM_MT48LC16M8A2TG_75)
+  /*SDRAM INFORMATION: */
+#define SDRAM_Tref  64		/* Refresh period in milliseconds   */
+#define SDRAM_NRA   4096	/* Number of row addresses in SDRAM */
+#define SDRAM_CL    CL_3
+#endif
+
+#if (CONFIG_MEM_MT48LC32M8A2_75)
+  /*SDRAM INFORMATION: */
+#define SDRAM_Tref  64		/* Refresh period in milliseconds   */
+#define SDRAM_NRA   8192	/* Number of row addresses in SDRAM */
+#define SDRAM_CL    CL_3
+#endif
+
+#if (CONFIG_MEM_MT48LC64M4A2FB_7E)
+  /*SDRAM INFORMATION: */
+#define SDRAM_Tref  64		/* Refresh period in milliseconds   */
+#define SDRAM_NRA   8192	/* Number of row addresses in SDRAM */
+#define SDRAM_CL    CL_3
+#endif
+
+#if (CONFIG_MEM_GENERIC_BOARD)
+  /*SDRAM INFORMATION: Modify this for your board */
+#define SDRAM_Tref  64		/* Refresh period in milliseconds   */
+#define SDRAM_NRA   8192	/* Number of row addresses in SDRAM */
+#define SDRAM_CL    CL_3
+#endif
+
+/* Equation from section 17 (p17-46) of BF533 HRM */
+#define mem_SDRRC       (((CONFIG_SCLK_HZ / 1000) * SDRAM_Tref) / SDRAM_NRA) - (SDRAM_tRAS_num + SDRAM_tRP_num)
+
+/* Enable SCLK Out */
+#define mem_SDGCTL        (SCTLE | SDRAM_CL | SDRAM_tRAS | SDRAM_tRP | SDRAM_tRCD | SDRAM_tWR | PSS)
+
+#if defined CONFIG_CLKIN_HALF
+#define CLKIN_HALF       1
+#else
+#define CLKIN_HALF       0
+#endif
+
+#if defined CONFIG_PLL_BYPASS
+#define PLL_BYPASS      1
+#else
+#define PLL_BYPASS       0
+#endif
+
+/***************************************Currently Not Being Used *********************************/
+#define flash_EBIU_AMBCTL_WAT  ((CONFIG_FLASH_SPEED_BWAT * 4) / (4000000000 / CONFIG_SCLK_HZ)) + 1
+#define flash_EBIU_AMBCTL_RAT  ((CONFIG_FLASH_SPEED_BRAT * 4) / (4000000000 / CONFIG_SCLK_HZ)) + 1
+#define flash_EBIU_AMBCTL_HT   ((CONFIG_FLASH_SPEED_BHT  * 4) / (4000000000 / CONFIG_SCLK_HZ))
+#define flash_EBIU_AMBCTL_ST   ((CONFIG_FLASH_SPEED_BST  * 4) / (4000000000 / CONFIG_SCLK_HZ)) + 1
+#define flash_EBIU_AMBCTL_TT   ((CONFIG_FLASH_SPEED_BTT  * 4) / (4000000000 / CONFIG_SCLK_HZ)) + 1
+
+#if (flash_EBIU_AMBCTL_TT > 3)
+#define flash_EBIU_AMBCTL0_TT   B0TT_4
+#endif
+#if (flash_EBIU_AMBCTL_TT == 3)
+#define flash_EBIU_AMBCTL0_TT   B0TT_3
+#endif
+#if (flash_EBIU_AMBCTL_TT == 2)
+#define flash_EBIU_AMBCTL0_TT   B0TT_2
+#endif
+#if (flash_EBIU_AMBCTL_TT < 2)
+#define flash_EBIU_AMBCTL0_TT   B0TT_1
+#endif
+
+#if (flash_EBIU_AMBCTL_ST > 3)
+#define flash_EBIU_AMBCTL0_ST   B0ST_4
+#endif
+#if (flash_EBIU_AMBCTL_ST == 3)
+#define flash_EBIU_AMBCTL0_ST   B0ST_3
+#endif
+#if (flash_EBIU_AMBCTL_ST == 2)
+#define flash_EBIU_AMBCTL0_ST   B0ST_2
+#endif
+#if (flash_EBIU_AMBCTL_ST < 2)
+#define flash_EBIU_AMBCTL0_ST   B0ST_1
+#endif
+
+#if (flash_EBIU_AMBCTL_HT > 2)
+#define flash_EBIU_AMBCTL0_HT   B0HT_3
+#endif
+#if (flash_EBIU_AMBCTL_HT == 2)
+#define flash_EBIU_AMBCTL0_HT   B0HT_2
+#endif
+#if (flash_EBIU_AMBCTL_HT == 1)
+#define flash_EBIU_AMBCTL0_HT   B0HT_1
+#endif
+#if (flash_EBIU_AMBCTL_HT == 0 && CONFIG_FLASH_SPEED_BHT == 0)
+#define flash_EBIU_AMBCTL0_HT   B0HT_0
+#endif
+#if (flash_EBIU_AMBCTL_HT == 0 && CONFIG_FLASH_SPEED_BHT != 0)
+#define flash_EBIU_AMBCTL0_HT   B0HT_1
+#endif
+
+#if (flash_EBIU_AMBCTL_WAT > 14)
+#define flash_EBIU_AMBCTL0_WAT  B0WAT_15
+#endif
+#if (flash_EBIU_AMBCTL_WAT == 14)
+#define flash_EBIU_AMBCTL0_WAT  B0WAT_14
+#endif
+#if (flash_EBIU_AMBCTL_WAT == 13)
+#define flash_EBIU_AMBCTL0_WAT  B0WAT_13
+#endif
+#if (flash_EBIU_AMBCTL_WAT == 12)
+#define flash_EBIU_AMBCTL0_WAT  B0WAT_12
+#endif
+#if (flash_EBIU_AMBCTL_WAT == 11)
+#define flash_EBIU_AMBCTL0_WAT  B0WAT_11
+#endif
+#if (flash_EBIU_AMBCTL_WAT == 10)
+#define flash_EBIU_AMBCTL0_WAT  B0WAT_10
+#endif
+#if (flash_EBIU_AMBCTL_WAT == 9)
+#define flash_EBIU_AMBCTL0_WAT  B0WAT_9
+#endif
+#if (flash_EBIU_AMBCTL_WAT == 8)
+#define flash_EBIU_AMBCTL0_WAT  B0WAT_8
+#endif
+#if (flash_EBIU_AMBCTL_WAT == 7)
+#define flash_EBIU_AMBCTL0_WAT  B0WAT_7
+#endif
+#if (flash_EBIU_AMBCTL_WAT == 6)
+#define flash_EBIU_AMBCTL0_WAT  B0WAT_6
+#endif
+#if (flash_EBIU_AMBCTL_WAT == 5)
+#define flash_EBIU_AMBCTL0_WAT  B0WAT_5
+#endif
+#if (flash_EBIU_AMBCTL_WAT == 4)
+#define flash_EBIU_AMBCTL0_WAT  B0WAT_4
+#endif
+#if (flash_EBIU_AMBCTL_WAT == 3)
+#define flash_EBIU_AMBCTL0_WAT  B0WAT_3
+#endif
+#if (flash_EBIU_AMBCTL_WAT == 2)
+#define flash_EBIU_AMBCTL0_WAT  B0WAT_2
+#endif
+#if (flash_EBIU_AMBCTL_WAT == 1)
+#define flash_EBIU_AMBCTL0_WAT  B0WAT_1
+#endif
+
+#if (flash_EBIU_AMBCTL_RAT > 14)
+#define flash_EBIU_AMBCTL0_RAT  B0RAT_15
+#endif
+#if (flash_EBIU_AMBCTL_RAT == 14)
+#define flash_EBIU_AMBCTL0_RAT  B0RAT_14
+#endif
+#if (flash_EBIU_AMBCTL_RAT == 13)
+#define flash_EBIU_AMBCTL0_RAT  B0RAT_13
+#endif
+#if (flash_EBIU_AMBCTL_RAT == 12)
+#define flash_EBIU_AMBCTL0_RAT  B0RAT_12
+#endif
+#if (flash_EBIU_AMBCTL_RAT == 11)
+#define flash_EBIU_AMBCTL0_RAT  B0RAT_11
+#endif
+#if (flash_EBIU_AMBCTL_RAT == 10)
+#define flash_EBIU_AMBCTL0_RAT  B0RAT_10
+#endif
+#if (flash_EBIU_AMBCTL_RAT == 9)
+#define flash_EBIU_AMBCTL0_RAT  B0RAT_9
+#endif
+#if (flash_EBIU_AMBCTL_RAT == 8)
+#define flash_EBIU_AMBCTL0_RAT  B0RAT_8
+#endif
+#if (flash_EBIU_AMBCTL_RAT == 7)
+#define flash_EBIU_AMBCTL0_RAT  B0RAT_7
+#endif
+#if (flash_EBIU_AMBCTL_RAT == 6)
+#define flash_EBIU_AMBCTL0_RAT  B0RAT_6
+#endif
+#if (flash_EBIU_AMBCTL_RAT == 5)
+#define flash_EBIU_AMBCTL0_RAT  B0RAT_5
+#endif
+#if (flash_EBIU_AMBCTL_RAT == 4)
+#define flash_EBIU_AMBCTL0_RAT  B0RAT_4
+#endif
+#if (flash_EBIU_AMBCTL_RAT == 3)
+#define flash_EBIU_AMBCTL0_RAT  B0RAT_3
+#endif
+#if (flash_EBIU_AMBCTL_RAT == 2)
+#define flash_EBIU_AMBCTL0_RAT  B0RAT_2
+#endif
+#if (flash_EBIU_AMBCTL_RAT == 1)
+#define flash_EBIU_AMBCTL0_RAT  B0RAT_1
+#endif
+
+#define flash_EBIU_AMBCTL0  \
+	(flash_EBIU_AMBCTL0_WAT | flash_EBIU_AMBCTL0_RAT | flash_EBIU_AMBCTL0_HT | \
+	 flash_EBIU_AMBCTL0_ST | flash_EBIU_AMBCTL0_TT | CONFIG_FLASH_SPEED_RDYEN)
diff --git a/arch/blackfin/mach-bf537/include/mach/mem_map.h b/arch/blackfin/mach-bf537/include/mach/mem_map.h
new file mode 100644
index 000000000000..5078b669431f
--- /dev/null
+++ b/arch/blackfin/mach-bf537/include/mach/mem_map.h
@@ -0,0 +1,179 @@
+/*
+ * file:         include/asm-blackfin/mach-bf537/mem_map.h
+ * based on:
+ * author:
+ *
+ * created:
+ * description:
+ *	Memory MAP Common header file for blackfin BF537/6/4 of processors.
+ * rev:
+ *
+ * modified:
+ *
+ * bugs:         enter bugs at http://blackfin.uclinux.org/
+ *
+ * this program is free software; you can redistribute it and/or modify
+ * it under the terms of the gnu general public license as published by
+ * the free software foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * this program is distributed in the hope that it will be useful,
+ * but without any warranty; without even the implied warranty of
+ * merchantability or fitness for a particular purpose.  see the
+ * gnu general public license for more details.
+ *
+ * you should have received a copy of the gnu general public license
+ * along with this program; see the file copying.
+ * if not, write to the free software foundation,
+ * 59 temple place - suite 330, boston, ma 02111-1307, usa.
+ */
+
+#ifndef _MEM_MAP_537_H_
+#define _MEM_MAP_537_H_
+
+#define COREMMR_BASE           0xFFE00000	 /* Core MMRs */
+#define SYSMMR_BASE            0xFFC00000	 /* System MMRs */
+
+/* Async Memory Banks */
+#define ASYNC_BANK3_BASE	0x20300000	 /* Async Bank 3 */
+#define ASYNC_BANK3_SIZE	0x00100000	/* 1M */
+#define ASYNC_BANK2_BASE	0x20200000	 /* Async Bank 2 */
+#define ASYNC_BANK2_SIZE	0x00100000	/* 1M */
+#define ASYNC_BANK1_BASE	0x20100000	 /* Async Bank 1 */
+#define ASYNC_BANK1_SIZE	0x00100000	/* 1M */
+#define ASYNC_BANK0_BASE	0x20000000	 /* Async Bank 0 */
+#define ASYNC_BANK0_SIZE	0x00100000	/* 1M */
+
+/* Boot ROM Memory */
+
+#define BOOT_ROM_START		0xEF000000
+#define BOOT_ROM_LENGTH		0x800
+
+/* Level 1 Memory */
+
+/* Memory Map for ADSP-BF537 processors */
+
+#ifdef CONFIG_BFIN_ICACHE
+#define BFIN_ICACHESIZE	(16*1024)
+#else
+#define BFIN_ICACHESIZE	(0*1024)
+#endif
+
+
+#ifdef CONFIG_BF537
+#define L1_CODE_START       0xFFA00000
+#define L1_DATA_A_START     0xFF800000
+#define L1_DATA_B_START     0xFF900000
+
+#define L1_CODE_LENGTH      0xC000
+
+#ifdef CONFIG_BFIN_DCACHE
+
+#ifdef CONFIG_BFIN_DCACHE_BANKA
+#define DMEM_CNTR (ACACHE_BSRAM | ENDCPLB | PORT_PREF0)
+#define L1_DATA_A_LENGTH      (0x8000 - 0x4000)
+#define L1_DATA_B_LENGTH      0x8000
+#define BFIN_DCACHESIZE	(16*1024)
+#define BFIN_DSUPBANKS	1
+#else
+#define DMEM_CNTR (ACACHE_BCACHE | ENDCPLB | PORT_PREF0)
+#define L1_DATA_A_LENGTH      (0x8000 - 0x4000)
+#define L1_DATA_B_LENGTH      (0x8000 - 0x4000)
+#define BFIN_DCACHESIZE	(32*1024)
+#define BFIN_DSUPBANKS	2
+#endif
+
+#else
+#define DMEM_CNTR (ASRAM_BSRAM | ENDCPLB | PORT_PREF0)
+#define L1_DATA_A_LENGTH      0x8000
+#define L1_DATA_B_LENGTH      0x8000
+#define BFIN_DCACHESIZE	(0*1024)
+#define BFIN_DSUPBANKS	0
+#endif /*CONFIG_BFIN_DCACHE*/
+
+#endif /*CONFIG_BF537*/
+
+/* Memory Map for ADSP-BF536 processors */
+
+#ifdef CONFIG_BF536
+#define L1_CODE_START       0xFFA00000
+#define L1_DATA_A_START     0xFF804000
+#define L1_DATA_B_START     0xFF904000
+
+#define L1_CODE_LENGTH      0xC000
+
+
+#ifdef CONFIG_BFIN_DCACHE
+
+#ifdef CONFIG_BFIN_DCACHE_BANKA
+#define DMEM_CNTR (ACACHE_BSRAM | ENDCPLB | PORT_PREF0)
+#define L1_DATA_A_LENGTH      (0x4000 - 0x4000)
+#define L1_DATA_B_LENGTH      0x4000
+#define BFIN_DCACHESIZE	(16*1024)
+#define BFIN_DSUPBANKS	1
+
+#else
+#define DMEM_CNTR (ACACHE_BCACHE | ENDCPLB | PORT_PREF0)
+#define L1_DATA_A_LENGTH      (0x4000 - 0x4000)
+#define L1_DATA_B_LENGTH      (0x4000 - 0x4000)
+#define BFIN_DCACHESIZE	(32*1024)
+#define BFIN_DSUPBANKS	2
+#endif
+
+#else
+#define DMEM_CNTR (ASRAM_BSRAM | ENDCPLB | PORT_PREF0)
+#define L1_DATA_A_LENGTH      0x4000
+#define L1_DATA_B_LENGTH      0x4000
+#define BFIN_DCACHESIZE	(0*1024)
+#define BFIN_DSUPBANKS	0
+#endif /*CONFIG_BFIN_DCACHE*/
+
+#endif
+
+/* Memory Map for ADSP-BF534 processors */
+
+#ifdef CONFIG_BF534
+#define L1_CODE_START       0xFFA00000
+#define L1_DATA_A_START     0xFF800000
+#define L1_DATA_B_START     0xFF900000
+
+#define L1_CODE_LENGTH      0xC000
+
+#ifdef CONFIG_BFIN_DCACHE
+
+#ifdef CONFIG_BFIN_DCACHE_BANKA
+#define DMEM_CNTR (ACACHE_BSRAM | ENDCPLB | PORT_PREF0)
+#define L1_DATA_A_LENGTH      (0x8000 - 0x4000)
+#define L1_DATA_B_LENGTH      0x8000
+#define BFIN_DCACHESIZE	(16*1024)
+#define BFIN_DSUPBANKS	1
+
+#else
+#define DMEM_CNTR (ACACHE_BCACHE | ENDCPLB | PORT_PREF0)
+#define L1_DATA_A_LENGTH      (0x8000 - 0x4000)
+#define L1_DATA_B_LENGTH      (0x8000 - 0x4000)
+#define BFIN_DCACHESIZE	(32*1024)
+#define BFIN_DSUPBANKS	2
+#endif
+
+#else
+#define DMEM_CNTR (ASRAM_BSRAM | ENDCPLB | PORT_PREF0)
+#define L1_DATA_A_LENGTH      0x8000
+#define L1_DATA_B_LENGTH      0x8000
+#define BFIN_DCACHESIZE	(0*1024)
+#define BFIN_DSUPBANKS	0
+#endif /*CONFIG_BFIN_DCACHE*/
+
+#endif
+
+/* Level 2 Memory - none */
+
+#define L2_START	0
+#define L2_LENGTH	0
+
+/* Scratch Pad Memory */
+
+#define L1_SCRATCH_START	0xFFB00000
+#define L1_SCRATCH_LENGTH	0x1000
+
+#endif				/* _MEM_MAP_537_H_ */
diff --git a/include/asm-blackfin/mach-bf537/portmux.h b/arch/blackfin/mach-bf537/include/mach/portmux.h
index 78fee6e0f237..78fee6e0f237 100644
--- a/include/asm-blackfin/mach-bf537/portmux.h
+++ b/arch/blackfin/mach-bf537/include/mach/portmux.h
diff --git a/arch/blackfin/mach-bf537/ints-priority.c b/arch/blackfin/mach-bf537/ints-priority.c
index a8b915f202ec..b1300b3f1812 100644
--- a/arch/blackfin/mach-bf537/ints-priority.c
+++ b/arch/blackfin/mach-bf537/ints-priority.c
@@ -31,7 +31,7 @@
 #include <linux/irq.h>
 #include <asm/blackfin.h>
 
-void program_IAR(void)
+void __init program_IAR(void)
 {
 	/* Program the IAR0 Register with the configured priority */
 	bfin_write_SIC_IAR0(((CONFIG_IRQ_PLL_WAKEUP - 7) << IRQ_PLL_WAKEUP_POS) |
diff --git a/arch/blackfin/mach-bf548/boards/cm_bf548.c b/arch/blackfin/mach-bf548/boards/cm_bf548.c
index 4f4ae8787edf..ce934ee174e0 100644
--- a/arch/blackfin/mach-bf548/boards/cm_bf548.c
+++ b/arch/blackfin/mach-bf548/boards/cm_bf548.c
@@ -45,7 +45,7 @@
 #include <asm/gpio.h>
 #include <asm/nand.h>
 #include <asm/portmux.h>
-#include <asm/mach/bf54x_keys.h>
+#include <mach/bf54x_keys.h>
 #include <asm/dpmc.h>
 #include <linux/input.h>
 #include <linux/spi/ad7877.h>
@@ -61,7 +61,7 @@ const char bfin_board_name[] = "Bluetechnix CM-BF548";
 
 #if defined(CONFIG_FB_BF54X_LQ043) || defined(CONFIG_FB_BF54X_LQ043_MODULE)
 
-#include <asm/mach/bf54x-lq043.h>
+#include <mach/bf54x-lq043.h>
 
 static struct bfin_bf54xfb_mach_info bf54x_lq043_data = {
 	.width =	480,
@@ -319,12 +319,12 @@ static struct platform_device bfin_atapi_device = {
 #if defined(CONFIG_MTD_NAND_BF5XX) || defined(CONFIG_MTD_NAND_BF5XX_MODULE)
 static struct mtd_partition partition_info[] = {
 	{
-		.name = "Linux Kernel",
+		.name = "linux kernel(nand)",
 		.offset = 0,
 		.size = 4 * SIZE_1M,
 	},
 	{
-		.name = "File System",
+		.name = "file system(nand)",
 		.offset = 4 * SIZE_1M,
 		.size = (256 - 4) * SIZE_1M,
 	},
@@ -377,12 +377,12 @@ static struct platform_device bf54x_sdh_device = {
 /* SPI flash chip (m25p16) */
 static struct mtd_partition bfin_spi_flash_partitions[] = {
 	{
-		.name = "bootloader",
+		.name = "bootloader(spi)",
 		.size = 0x00040000,
 		.offset = 0,
 		.mask_flags = MTD_CAP_ROM
 	}, {
-		.name = "linux kernel",
+		.name = "linux kernel(spi)",
 		.size = 0x1c0000,
 		.offset = 0x40000
 	}
diff --git a/arch/blackfin/mach-bf548/boards/ezkit.c b/arch/blackfin/mach-bf548/boards/ezkit.c
index af7c211a580e..39357693046d 100644
--- a/arch/blackfin/mach-bf548/boards/ezkit.c
+++ b/arch/blackfin/mach-bf548/boards/ezkit.c
@@ -48,7 +48,7 @@
 #include <asm/nand.h>
 #include <asm/dpmc.h>
 #include <asm/portmux.h>
-#include <asm/mach/bf54x_keys.h>
+#include <mach/bf54x_keys.h>
 #include <linux/input.h>
 #include <linux/spi/ad7877.h>
 
@@ -61,9 +61,52 @@ const char bfin_board_name[] = "ADSP-BF548-EZKIT";
  *  Driver needs to know address, irq and flag pin.
  */
 
+#if defined(CONFIG_USB_ISP1760_HCD) || defined(CONFIG_USB_ISP1760_HCD_MODULE)
+static struct resource bfin_isp1761_resources[] = {
+	[0] = {
+		.name	= "isp1761-regs",
+		.start  = 0x2C0C0000,
+		.end    = 0x2C0C0000 + 0xfffff,
+		.flags  = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start  = IRQ_PG7,
+		.end    = IRQ_PG7,
+		.flags  = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device bfin_isp1761_device = {
+	.name           = "isp1761",
+	.id             = 0,
+	.num_resources  = ARRAY_SIZE(bfin_isp1761_resources),
+	.resource       = bfin_isp1761_resources,
+};
+
+static struct platform_device *bfin_isp1761_devices[] = {
+	&bfin_isp1761_device,
+};
+
+int __init bfin_isp1761_init(void)
+{
+	unsigned int num_devices = ARRAY_SIZE(bfin_isp1761_devices);
+
+	printk(KERN_INFO "%s(): registering device resources\n", __func__);
+	set_irq_type(bfin_isp1761_resources[1].start, IRQF_TRIGGER_FALLING);
+
+	return platform_add_devices(bfin_isp1761_devices, num_devices);
+}
+
+void __exit bfin_isp1761_exit(void)
+{
+	platform_device_unregister(&bfin_isp1761_device);
+}
+arch_initcall(bfin_isp1761_init);
+#endif
+
 #if defined(CONFIG_FB_BF54X_LQ043) || defined(CONFIG_FB_BF54X_LQ043_MODULE)
 
-#include <asm/mach/bf54x-lq043.h>
+#include <mach/bf54x-lq043.h>
 
 static struct bfin_bf54xfb_mach_info bf54x_lq043_data = {
 	.width =	480,
@@ -177,6 +220,7 @@ static struct resource bfin_uart_resources[] = {
 	{
 		.start = 0xFFC03100,
 		.end = 0xFFC031FF,
+		.flags = IORESOURCE_MEM,
 	},
 #endif
 };
@@ -321,12 +365,12 @@ static struct platform_device bfin_atapi_device = {
 #if defined(CONFIG_MTD_NAND_BF5XX) || defined(CONFIG_MTD_NAND_BF5XX_MODULE)
 static struct mtd_partition partition_info[] = {
 	{
-		.name = "Linux Kernel",
+		.name = "linux kernel(nand)",
 		.offset = 0,
 		.size = 4 * SIZE_1M,
 	},
 	{
-		.name = "File System",
+		.name = "file system(nand)",
 		.offset = MTDPART_OFS_APPEND,
 		.size = MTDPART_SIZ_FULL,
 	},
@@ -375,15 +419,15 @@ static struct platform_device bf54x_sdh_device = {
 #if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
 static struct mtd_partition ezkit_partitions[] = {
 	{
-		.name       = "Bootloader",
+		.name       = "bootloader(nor)",
 		.size       = 0x40000,
 		.offset     = 0,
 	}, {
-		.name       = "Kernel",
+		.name       = "linux kernel(nor)",
 		.size       = 0x1C0000,
 		.offset     = MTDPART_OFS_APPEND,
 	}, {
-		.name       = "RootFS",
+		.name       = "file system(nor)",
 		.size       = MTDPART_SIZ_FULL,
 		.offset     = MTDPART_OFS_APPEND,
 	}
@@ -417,12 +461,12 @@ static struct platform_device ezkit_flash_device = {
 /* SPI flash chip (m25p16) */
 static struct mtd_partition bfin_spi_flash_partitions[] = {
 	{
-		.name = "bootloader",
+		.name = "bootloader(spi)",
 		.size = 0x00040000,
 		.offset = 0,
 		.mask_flags = MTD_CAP_ROM
 	}, {
-		.name = "linux kernel",
+		.name = "linux kernel(spi)",
 		.size = MTDPART_SIZ_FULL,
 		.offset = MTDPART_OFS_APPEND,
 	}
diff --git a/arch/blackfin/mach-bf548/head.S b/arch/blackfin/mach-bf548/head.S
index f7191141a3ce..4d5cfeacb123 100644
--- a/arch/blackfin/mach-bf548/head.S
+++ b/arch/blackfin/mach-bf548/head.S
@@ -30,265 +30,13 @@
 #include <linux/linkage.h>
 #include <linux/init.h>
 #include <asm/blackfin.h>
-#include <asm/trace.h>
-#if CONFIG_BFIN_KERNEL_CLOCK
-#include <asm/mach-common/clocks.h>
-#include <asm/mach/mem_init.h>
+#ifdef CONFIG_BFIN_KERNEL_CLOCK
+#include <asm/clocks.h>
+#include <mach/mem_init.h>
 #endif
 
-.extern ___bss_stop
-.extern ___bss_start
-.extern _bf53x_relocate_l1_mem
-
-#define INITIAL_STACK   0xFFB01000
-
-__INIT
-
-ENTRY(__start)
-	/* R0: argument of command line string, passed from uboot, save it */
-	R7 = R0;
-	/* Enable Cycle Counter and Nesting Of Interrupts */
-#ifdef CONFIG_BFIN_SCRATCH_REG_CYCLES
-	R0 = SYSCFG_SNEN;
-#else
-	R0 = SYSCFG_SNEN | SYSCFG_CCEN;
-#endif
-	SYSCFG = R0;
-	R0 = 0;
-
-	/* Clear Out All the data and pointer  Registers*/
-	R1 = R0;
-	R2 = R0;
-	R3 = R0;
-	R4 = R0;
-	R5 = R0;
-	R6 = R0;
-
-	P0 = R0;
-	P1 = R0;
-	P2 = R0;
-	P3 = R0;
-	P4 = R0;
-	P5 = R0;
-
-	LC0 = r0;
-	LC1 = r0;
-	L0 = r0;
-	L1 = r0;
-	L2 = r0;
-	L3 = r0;
-
-	/* Clear Out All the DAG Registers*/
-	B0 = r0;
-	B1 = r0;
-	B2 = r0;
-	B3 = r0;
-
-	I0 = r0;
-	I1 = r0;
-	I2 = r0;
-	I3 = r0;
-
-	M0 = r0;
-	M1 = r0;
-	M2 = r0;
-	M3 = r0;
-
-	trace_buffer_init(p0,r0);
-	P0 = R1;
-	R0 = R1;
-
-	/* Turn off the icache */
-	p0.l = LO(IMEM_CONTROL);
-	p0.h = HI(IMEM_CONTROL);
-	R1 = [p0];
-	R0 = ~ENICPLB;
-	R0 = R0 & R1;
-	[p0] = R0;
-	SSYNC;
-
-	/* Turn off the dcache */
-	p0.l = LO(DMEM_CONTROL);
-	p0.h = HI(DMEM_CONTROL);
-	R1 = [p0];
-	R0 = ~ENDCPLB;
-	R0 = R0 & R1;
-	[p0] = R0;
-	SSYNC;
-
-	/* Initialize stack pointer */
-	SP.L = LO(INITIAL_STACK);
-	SP.H = HI(INITIAL_STACK);
-	FP = SP;
-	USP = SP;
-
-#ifdef CONFIG_EARLY_PRINTK
-	SP += -12;
-	call _init_early_exception_vectors;
-	SP += 12;
-#endif
-
-	/* Put The Code for PLL Programming and SDRAM Programming in L1 ISRAM */
-	call _bf53x_relocate_l1_mem;
-#if CONFIG_BFIN_KERNEL_CLOCK
-	call _start_dma_code;
-#endif
-	/* Code for initializing Async memory banks */
-
-	p2.h = hi(EBIU_AMBCTL1);
-	p2.l = lo(EBIU_AMBCTL1);
-	r0.h = hi(AMBCTL1VAL);
-	r0.l = lo(AMBCTL1VAL);
-	[p2] = r0;
-	ssync;
-
-	p2.h = hi(EBIU_AMBCTL0);
-	p2.l = lo(EBIU_AMBCTL0);
-	r0.h = hi(AMBCTL0VAL);
-	r0.l = lo(AMBCTL0VAL);
-	[p2] = r0;
-	ssync;
-
-	p2.h = hi(EBIU_AMGCTL);
-	p2.l = lo(EBIU_AMGCTL);
-	r0 = AMGCTLVAL;
-	w[p2] = r0;
-	ssync;
-
-	p2.h = hi(EBIU_MBSCTL);
-	p2.l = lo(EBIU_MBSCTL);
-	r0.h = hi(CONFIG_EBIU_MBSCTLVAL);
-	r0.l = lo(CONFIG_EBIU_MBSCTLVAL);
-	[p2] = r0;
-	ssync;
-
-	p2.h = hi(EBIU_MODE);
-	p2.l = lo(EBIU_MODE);
-	r0.h = hi(CONFIG_EBIU_MODEVAL);
-	r0.l = lo(CONFIG_EBIU_MODEVAL);
-	[p2] = r0;
-	ssync;
-
-	p2.h = hi(EBIU_FCTL);
-	p2.l = lo(EBIU_FCTL);
-	r0.h = hi(CONFIG_EBIU_FCTLVAL);
-	r0.l = lo(CONFIG_EBIU_FCTLVAL);
-	[p2] = r0;
-	ssync;
-
-	/* This section keeps the processor in supervisor mode
-	 * during kernel boot.  Switches to user mode at end of boot.
-	 * See page 3-9 of Hardware Reference manual for documentation.
-	 */
-
-	/* EVT15 = _real_start */
-
-	p0.l = lo(EVT15);
-	p0.h = hi(EVT15);
-	p1.l = _real_start;
-	p1.h = _real_start;
-	[p0] = p1;
-	csync;
-
-	p0.l = lo(IMASK);
-	p0.h = hi(IMASK);
-	p1.l = IMASK_IVG15;
-	p1.h = 0x0;
-	[p0] = p1;
-	csync;
-
-	raise 15;
-	p0.l = .LWAIT_HERE;
-	p0.h = .LWAIT_HERE;
-	reti = p0;
-#if ANOMALY_05000281
-	nop;
-	nop;
-	nop;
-#endif
-	rti;
-
-.LWAIT_HERE:
-	jump .LWAIT_HERE;
-ENDPROC(__start)
-
-ENTRY(_real_start)
-	[ -- sp ] = reti;
-	p0.l = lo(WDOG_CTL);
-	p0.h = hi(WDOG_CTL);
-	r0 = 0xAD6(z);
-	w[p0] = r0;	/* watchdog off for now */
-	ssync;
-
-	/* Code update for BSS size == 0
-	 * Zero out the bss region.
-	 */
-
-	p1.l = ___bss_start;
-	p1.h = ___bss_start;
-	p2.l = ___bss_stop;
-	p2.h = ___bss_stop;
-	r0 = 0;
-	p2 -= p1;
-	lsetup (.L_clear_bss, .L_clear_bss ) lc0 = p2;
-.L_clear_bss:
-	B[p1++] = r0;
-
-	/* In case there is a NULL pointer reference
-	 * Zero out region before stext
-	 */
-
-	p1.l = 0x0;
-	p1.h = 0x0;
-	r0.l = __stext;
-	r0.h = __stext;
-	r0 = r0 >> 1;
-	p2 = r0;
-	r0 = 0;
-	lsetup (.L_clear_zero, .L_clear_zero ) lc0 = p2;
-.L_clear_zero:
-	W[p1++] = r0;
-
-	/* pass the uboot arguments to the global value command line */
-	R0 = R7;
-	call _cmdline_init;
-
-	p1.l = __rambase;
-	p1.h = __rambase;
-	r0.l = __sdata;
-	r0.h = __sdata;
-	[p1] = r0;
-
-	p1.l = __ramstart;
-	p1.h = __ramstart;
-	p3.l = ___bss_stop;
-	p3.h = ___bss_stop;
-
-	r1 = p3;
-	[p1] = r1;
-
-
-	/*
-	 *  load the current thread pointer and stack
-	 */
-	r1.l = _init_thread_union;
-	r1.h = _init_thread_union;
-
-	r2.l = 0x2000;
-	r2.h = 0x0000;
-	r1 = r1 + r2;
-	sp = r1;
-	usp = sp;
-	fp = sp;
-	call _start_kernel;
-.L_exit:
-	jump.s	.L_exit;
-ENDPROC(_real_start)
-
-__FINIT
-
 .section .l1.text
-#if CONFIG_BFIN_KERNEL_CLOCK
+#ifdef CONFIG_BFIN_KERNEL_CLOCK
 ENTRY(_start_dma_code)
 
 	/* Enable PHY CLK buffer output */
@@ -443,13 +191,6 @@ ENTRY(_start_dma_code)
 	SSYNC;
 #endif
 
-	p0.h = hi(SIC_IWR0);
-	p0.l = lo(SIC_IWR0);
-	r0.l = lo(IWR_ENABLE_ALL);
-	r0.h = hi(IWR_ENABLE_ALL);
-	[p0] = r0;
-	SSYNC;
-
 	RTS;
 ENDPROC(_start_dma_code)
 #endif /* CONFIG_BFIN_KERNEL_CLOCK */
diff --git a/include/asm-blackfin/mach-bf548/anomaly.h b/arch/blackfin/mach-bf548/include/mach/anomaly.h
index 3ad59655881a..3ad59655881a 100644
--- a/include/asm-blackfin/mach-bf548/anomaly.h
+++ b/arch/blackfin/mach-bf548/include/mach/anomaly.h
diff --git a/include/asm-blackfin/mach-bf548/bf548.h b/arch/blackfin/mach-bf548/include/mach/bf548.h
index e748588e8930..e748588e8930 100644
--- a/include/asm-blackfin/mach-bf548/bf548.h
+++ b/arch/blackfin/mach-bf548/include/mach/bf548.h
diff --git a/include/asm-blackfin/mach-bf548/bf54x-lq043.h b/arch/blackfin/mach-bf548/include/mach/bf54x-lq043.h
index 9c7ca62a45eb..9c7ca62a45eb 100644
--- a/include/asm-blackfin/mach-bf548/bf54x-lq043.h
+++ b/arch/blackfin/mach-bf548/include/mach/bf54x-lq043.h
diff --git a/include/asm-blackfin/mach-bf548/bf54x_keys.h b/arch/blackfin/mach-bf548/include/mach/bf54x_keys.h
index 1fb4ec77cc25..1fb4ec77cc25 100644
--- a/include/asm-blackfin/mach-bf548/bf54x_keys.h
+++ b/arch/blackfin/mach-bf548/include/mach/bf54x_keys.h
diff --git a/include/asm-blackfin/mach-bf548/bfin_serial_5xx.h b/arch/blackfin/mach-bf548/include/mach/bfin_serial_5xx.h
index 5e29446a8e03..5e29446a8e03 100644
--- a/include/asm-blackfin/mach-bf548/bfin_serial_5xx.h
+++ b/arch/blackfin/mach-bf548/include/mach/bfin_serial_5xx.h
diff --git a/arch/blackfin/mach-bf548/include/mach/bfin_sir.h b/arch/blackfin/mach-bf548/include/mach/bfin_sir.h
new file mode 100644
index 000000000000..c41f9cf00268
--- /dev/null
+++ b/arch/blackfin/mach-bf548/include/mach/bfin_sir.h
@@ -0,0 +1,166 @@
+/*
+ * Blackfin Infra-red Driver
+ *
+ * Copyright 2006-2008 Analog Devices Inc.
+ *
+ * Enter bugs at http://blackfin.uclinux.org/
+ *
+ * Licensed under the GPL-2 or later.
+ *
+ */
+
+#include <linux/serial.h>
+#include <asm/dma.h>
+#include <asm/portmux.h>
+
+#define SIR_UART_GET_CHAR(port)   bfin_read16((port)->membase + OFFSET_RBR)
+#define SIR_UART_GET_DLL(port)    bfin_read16((port)->membase + OFFSET_DLL)
+#define SIR_UART_GET_IER(port)    bfin_read16((port)->membase + OFFSET_IER_SET)
+#define SIR_UART_GET_DLH(port)    bfin_read16((port)->membase + OFFSET_DLH)
+#define SIR_UART_GET_LCR(port)    bfin_read16((port)->membase + OFFSET_LCR)
+#define SIR_UART_GET_LSR(port)    bfin_read16((port)->membase + OFFSET_LSR)
+#define SIR_UART_GET_GCTL(port)   bfin_read16((port)->membase + OFFSET_GCTL)
+
+#define SIR_UART_PUT_CHAR(port, v) bfin_write16(((port)->membase + OFFSET_THR), v)
+#define SIR_UART_PUT_DLL(port, v)  bfin_write16(((port)->membase + OFFSET_DLL), v)
+#define SIR_UART_SET_IER(port, v)  bfin_write16(((port)->membase + OFFSET_IER_SET), v)
+#define SIR_UART_CLEAR_IER(port, v)  bfin_write16(((port)->membase + OFFSET_IER_CLEAR), v)
+#define SIR_UART_PUT_DLH(port, v)  bfin_write16(((port)->membase + OFFSET_DLH), v)
+#define SIR_UART_PUT_LSR(port, v)  bfin_write16(((port)->membase + OFFSET_LSR), v)
+#define SIR_UART_PUT_LCR(port, v)  bfin_write16(((port)->membase + OFFSET_LCR), v)
+#define SIR_UART_CLEAR_LSR(port)  bfin_write16(((port)->membase + OFFSET_LSR), -1)
+#define SIR_UART_PUT_GCTL(port, v) bfin_write16(((port)->membase + OFFSET_GCTL), v)
+
+#ifdef CONFIG_SIR_BFIN_DMA
+struct dma_rx_buf {
+	char *buf;
+	int head;
+	int tail;
+	};
+#endif /* CONFIG_SIR_BFIN_DMA */
+
+struct bfin_sir_port {
+	unsigned char __iomem   *membase;
+	unsigned int            irq;
+	unsigned int            lsr;
+	unsigned long           clk;
+	struct net_device       *dev;
+#ifdef CONFIG_SIR_BFIN_DMA
+	int                     tx_done;
+	struct dma_rx_buf       rx_dma_buf;
+	struct timer_list       rx_dma_timer;
+	int                     rx_dma_nrows;
+#endif /* CONFIG_SIR_BFIN_DMA */
+	unsigned int            tx_dma_channel;
+	unsigned int            rx_dma_channel;
+};
+
+struct bfin_sir_port sir_ports[BFIN_UART_NR_PORTS];
+
+struct bfin_sir_port_res {
+	unsigned long   base_addr;
+	int             irq;
+	unsigned int    rx_dma_channel;
+	unsigned int    tx_dma_channel;
+};
+
+struct bfin_sir_port_res bfin_sir_port_resource[] = {
+#ifdef CONFIG_BFIN_SIR0
+	{
+	0xFFC00400,
+	IRQ_UART0_RX,
+	CH_UART0_RX,
+	CH_UART0_TX,
+	},
+#endif
+#ifdef CONFIG_BFIN_SIR1
+	{
+	0xFFC02000,
+	IRQ_UART1_RX,
+	CH_UART1_RX,
+	CH_UART1_TX,
+	},
+#endif
+#ifdef CONFIG_BFIN_SIR2
+	{
+	0xFFC02100,
+	IRQ_UART2_RX,
+	CH_UART2_RX,
+	CH_UART2_TX,
+	},
+#endif
+#ifdef CONFIG_BFIN_SIR3
+	{
+	0xFFC03100,
+	IRQ_UART3_RX,
+	CH_UART3_RX,
+	CH_UART3_TX,
+	},
+#endif
+};
+
+int nr_sirs = ARRAY_SIZE(bfin_sir_port_resource);
+
+struct bfin_sir_self {
+	struct bfin_sir_port    *sir_port;
+	spinlock_t              lock;
+	unsigned int            open;
+	int                     speed;
+	int                     newspeed;
+
+	struct sk_buff          *txskb;
+	struct sk_buff          *rxskb;
+	struct net_device_stats stats;
+	struct device           *dev;
+	struct irlap_cb         *irlap;
+	struct qos_info         qos;
+
+	iobuff_t                tx_buff;
+	iobuff_t                rx_buff;
+
+	struct work_struct      work;
+	int                     mtt;
+};
+
+#define DRIVER_NAME "bfin_sir"
+
+static int bfin_sir_hw_init(void)
+{
+	int ret = -ENODEV;
+#ifdef CONFIG_BFIN_SIR0
+	ret = peripheral_request(P_UART0_TX, DRIVER_NAME);
+	if (ret)
+		return ret;
+	ret = peripheral_request(P_UART0_RX, DRIVER_NAME);
+	if (ret)
+		return ret;
+#endif
+
+#ifdef CONFIG_BFIN_SIR1
+	ret = peripheral_request(P_UART1_TX, DRIVER_NAME);
+	if (ret)
+		return ret;
+	ret = peripheral_request(P_UART1_RX, DRIVER_NAME);
+	if (ret)
+		return ret;
+#endif
+
+#ifdef CONFIG_BFIN_SIR2
+	ret = peripheral_request(P_UART2_TX, DRIVER_NAME);
+	if (ret)
+		return ret;
+	ret = peripheral_request(P_UART2_RX, DRIVER_NAME);
+	if (ret)
+		return ret;
+#endif
+
+#ifdef CONFIG_BFIN_SIR3
+	ret = peripheral_request(P_UART3_TX, DRIVER_NAME);
+	if (ret)
+		return ret;
+	ret = peripheral_request(P_UART3_RX, DRIVER_NAME);
+	if (ret)
+		return ret;
+#endif
+	return ret;
+}
diff --git a/include/asm-blackfin/mach-bf548/blackfin.h b/arch/blackfin/mach-bf548/include/mach/blackfin.h
index d6ee74ac0460..d6ee74ac0460 100644
--- a/include/asm-blackfin/mach-bf548/blackfin.h
+++ b/arch/blackfin/mach-bf548/include/mach/blackfin.h
diff --git a/include/asm-blackfin/mach-bf548/cdefBF542.h b/arch/blackfin/mach-bf548/include/mach/cdefBF542.h
index 60b9f77576f1..07aefb9ed79b 100644
--- a/include/asm-blackfin/mach-bf548/cdefBF542.h
+++ b/arch/blackfin/mach-bf548/include/mach/cdefBF542.h
@@ -35,7 +35,7 @@
 #include "defBF542.h"
 
 /* include core sbfin_read_()ecific register pointer definitions */
-#include <asm/mach-common/cdef_LPBlackfin.h>
+#include <asm/cdef_LPBlackfin.h>
 
 /* SYSTEM & MMR ADDRESS DEFINITIONS FOR ADSP-BF542 */
 
diff --git a/include/asm-blackfin/mach-bf548/cdefBF544.h b/arch/blackfin/mach-bf548/include/mach/cdefBF544.h
index ea9b4ab496f3..431a69278991 100644
--- a/include/asm-blackfin/mach-bf548/cdefBF544.h
+++ b/arch/blackfin/mach-bf548/include/mach/cdefBF544.h
@@ -35,7 +35,7 @@
 #include "defBF544.h"
 
 /* include core sbfin_read_()ecific register pointer definitions */
-#include <asm/mach-common/cdef_LPBlackfin.h>
+#include <asm/cdef_LPBlackfin.h>
 
 /* SYSTEM & MMR ADDRESS DEFINITIONS FOR ADSP-BF544 */
 
diff --git a/include/asm-blackfin/mach-bf548/cdefBF547.h b/arch/blackfin/mach-bf548/include/mach/cdefBF547.h
index ba716277c00d..93376e90dfc5 100644
--- a/include/asm-blackfin/mach-bf548/cdefBF547.h
+++ b/arch/blackfin/mach-bf548/include/mach/cdefBF547.h
@@ -35,7 +35,7 @@
 #include "defBF548.h"
 
 /* include core sbfin_read_()ecific register pointer definitions */
-#include <asm/mach-common/cdef_LPBlackfin.h>
+#include <asm/cdef_LPBlackfin.h>
 
 /* SYSTEM & MMR ADDRESS DEFINITIONS FOR ADSP-BF548 */
 
diff --git a/include/asm-blackfin/mach-bf548/cdefBF548.h b/arch/blackfin/mach-bf548/include/mach/cdefBF548.h
index ae971ebff6a0..9cd74384136f 100644
--- a/include/asm-blackfin/mach-bf548/cdefBF548.h
+++ b/arch/blackfin/mach-bf548/include/mach/cdefBF548.h
@@ -35,7 +35,7 @@
 #include "defBF548.h"
 
 /* include core sbfin_read_()ecific register pointer definitions */
-#include <asm/mach-common/cdef_LPBlackfin.h>
+#include <asm/cdef_LPBlackfin.h>
 
 /* SYSTEM & MMR ADDRESS DEFINITIONS FOR ADSP-BF548 */
 
diff --git a/include/asm-blackfin/mach-bf548/cdefBF549.h b/arch/blackfin/mach-bf548/include/mach/cdefBF549.h
index 92d07d961999..ead360b69dea 100644
--- a/include/asm-blackfin/mach-bf548/cdefBF549.h
+++ b/arch/blackfin/mach-bf548/include/mach/cdefBF549.h
@@ -35,7 +35,7 @@
 #include "defBF549.h"
 
 /* include core sbfin_read_()ecific register pointer definitions */
-#include <asm/mach-common/cdef_LPBlackfin.h>
+#include <asm/cdef_LPBlackfin.h>
 
 /* SYSTEM & MMR ADDRESS DEFINITIONS FOR ADSP-BF549 */
 
diff --git a/include/asm-blackfin/mach-bf548/cdefBF54x_base.h b/arch/blackfin/mach-bf548/include/mach/cdefBF54x_base.h
index 57ac8cb9b1f6..57ac8cb9b1f6 100644
--- a/include/asm-blackfin/mach-bf548/cdefBF54x_base.h
+++ b/arch/blackfin/mach-bf548/include/mach/cdefBF54x_base.h
diff --git a/include/asm-blackfin/mach-bf548/defBF542.h b/arch/blackfin/mach-bf548/include/mach/defBF542.h
index a7c809f29ede..b1316541b8d6 100644
--- a/include/asm-blackfin/mach-bf548/defBF542.h
+++ b/arch/blackfin/mach-bf548/include/mach/defBF542.h
@@ -32,7 +32,7 @@
 #define _DEF_BF542_H
 
 /* Include all Core registers and bit definitions */
-#include <asm/mach-common/def_LPBlackfin.h>
+#include <asm/def_LPBlackfin.h>
 
 /* SYSTEM & MMR ADDRESS DEFINITIONS FOR ADSP-BF542 */
 
diff --git a/include/asm-blackfin/mach-bf548/defBF544.h b/arch/blackfin/mach-bf548/include/mach/defBF544.h
index b8b9870e2697..c2c785bdc5fc 100644
--- a/include/asm-blackfin/mach-bf548/defBF544.h
+++ b/arch/blackfin/mach-bf548/include/mach/defBF544.h
@@ -32,7 +32,7 @@
 #define _DEF_BF544_H
 
 /* Include all Core registers and bit definitions */
-#include <asm/mach-common/def_LPBlackfin.h>
+#include <asm/def_LPBlackfin.h>
 
 /* SYSTEM & MMR ADDRESS DEFINITIONS FOR ADSP-BF544 */
 
diff --git a/include/asm-blackfin/mach-bf548/defBF547.h b/arch/blackfin/mach-bf548/include/mach/defBF547.h
index 3a3a18ebb10e..661f0d877bd1 100644
--- a/include/asm-blackfin/mach-bf548/defBF547.h
+++ b/arch/blackfin/mach-bf548/include/mach/defBF547.h
@@ -32,7 +32,7 @@
 #define _DEF_BF548_H
 
 /* Include all Core registers and bit definitions */
-#include <asm/mach-common/def_LPBlackfin.h>
+#include <asm/def_LPBlackfin.h>
 
 /* SYSTEM & MMR ADDRESS DEFINITIONS FOR ADSP-BF548 */
 
diff --git a/include/asm-blackfin/mach-bf548/defBF548.h b/arch/blackfin/mach-bf548/include/mach/defBF548.h
index 1d7c96edb038..85d4bade911d 100644
--- a/include/asm-blackfin/mach-bf548/defBF548.h
+++ b/arch/blackfin/mach-bf548/include/mach/defBF548.h
@@ -32,7 +32,7 @@
 #define _DEF_BF548_H
 
 /* Include all Core registers and bit definitions */
-#include <asm/mach-common/def_LPBlackfin.h>
+#include <asm/def_LPBlackfin.h>
 
 /* SYSTEM & MMR ADDRESS DEFINITIONS FOR ADSP-BF548 */
 
diff --git a/include/asm-blackfin/mach-bf548/defBF549.h b/arch/blackfin/mach-bf548/include/mach/defBF549.h
index fcb72b41e007..096734541644 100644
--- a/include/asm-blackfin/mach-bf548/defBF549.h
+++ b/arch/blackfin/mach-bf548/include/mach/defBF549.h
@@ -32,7 +32,7 @@
 #define _DEF_BF549_H
 
 /* Include all Core registers and bit definitions */
-#include <asm/mach-common/def_LPBlackfin.h>
+#include <asm/def_LPBlackfin.h>
 
 
 /* SYSTEM & MMR ADDRESS DEFINITIONS FOR ADSP-BF549 */
diff --git a/include/asm-blackfin/mach-bf548/defBF54x_base.h b/arch/blackfin/mach-bf548/include/mach/defBF54x_base.h
index e022e896cb18..e022e896cb18 100644
--- a/include/asm-blackfin/mach-bf548/defBF54x_base.h
+++ b/arch/blackfin/mach-bf548/include/mach/defBF54x_base.h
diff --git a/include/asm-blackfin/mach-bf548/dma.h b/arch/blackfin/mach-bf548/include/mach/dma.h
index 36a2ef7e7849..36a2ef7e7849 100644
--- a/include/asm-blackfin/mach-bf548/dma.h
+++ b/arch/blackfin/mach-bf548/include/mach/dma.h
diff --git a/arch/blackfin/mach-bf548/include/mach/gpio.h b/arch/blackfin/mach-bf548/include/mach/gpio.h
new file mode 100644
index 000000000000..bba82dc75f16
--- /dev/null
+++ b/arch/blackfin/mach-bf548/include/mach/gpio.h
@@ -0,0 +1,219 @@
+/*
+ * File:         include/asm-blackfin/mach-bf548/gpio.h
+ * Based on:
+ * Author:	 Michael Hennerich (hennerich@blackfin.uclinux.org)
+ *
+ * Created:
+ * Description:
+ *
+ * Modified:
+ *               Copyright 2004-2007 Analog Devices Inc.
+ *
+ * Bugs:         Enter bugs at http://blackfin.uclinux.org/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see the file COPYING, or write
+ * to the Free Software Foundation, Inc.,
+ * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ */
+
+
+
+#define GPIO_PA0	0
+#define GPIO_PA1	1
+#define GPIO_PA2	2
+#define GPIO_PA3	3
+#define GPIO_PA4	4
+#define GPIO_PA5	5
+#define GPIO_PA6	6
+#define GPIO_PA7	7
+#define GPIO_PA8	8
+#define GPIO_PA9	9
+#define GPIO_PA10	10
+#define GPIO_PA11	11
+#define GPIO_PA12	12
+#define GPIO_PA13	13
+#define GPIO_PA14	14
+#define GPIO_PA15	15
+#define GPIO_PB0	16
+#define GPIO_PB1	17
+#define GPIO_PB2	18
+#define GPIO_PB3	19
+#define GPIO_PB4	20
+#define GPIO_PB5	21
+#define GPIO_PB6	22
+#define GPIO_PB7	23
+#define GPIO_PB8	24
+#define GPIO_PB9	25
+#define GPIO_PB10	26
+#define GPIO_PB11	27
+#define GPIO_PB12	28
+#define GPIO_PB13	29
+#define GPIO_PB14	30
+#define GPIO_PB15	31	/* N/A */
+#define GPIO_PC0	32
+#define GPIO_PC1	33
+#define GPIO_PC2	34
+#define GPIO_PC3	35
+#define GPIO_PC4	36
+#define GPIO_PC5	37
+#define GPIO_PC6	38
+#define GPIO_PC7	39
+#define GPIO_PC8	40
+#define GPIO_PC9	41
+#define GPIO_PC10	42
+#define GPIO_PC11	43
+#define GPIO_PC12	44
+#define GPIO_PC13	45
+#define GPIO_PC14	46	/* N/A */
+#define GPIO_PC15	47	/* N/A */
+#define GPIO_PD0	48
+#define GPIO_PD1	49
+#define GPIO_PD2	50
+#define GPIO_PD3	51
+#define GPIO_PD4	52
+#define GPIO_PD5	53
+#define GPIO_PD6	54
+#define GPIO_PD7	55
+#define GPIO_PD8	56
+#define GPIO_PD9	57
+#define GPIO_PD10	58
+#define GPIO_PD11	59
+#define GPIO_PD12	60
+#define GPIO_PD13	61
+#define GPIO_PD14	62
+#define GPIO_PD15	63
+#define GPIO_PE0	64
+#define GPIO_PE1	65
+#define GPIO_PE2	66
+#define GPIO_PE3	67
+#define GPIO_PE4	68
+#define GPIO_PE5	69
+#define GPIO_PE6	70
+#define GPIO_PE7	71
+#define GPIO_PE8	72
+#define GPIO_PE9	73
+#define GPIO_PE10	74
+#define GPIO_PE11	75
+#define GPIO_PE12	76
+#define GPIO_PE13	77
+#define GPIO_PE14	78
+#define GPIO_PE15	79
+#define GPIO_PF0	80
+#define GPIO_PF1	81
+#define GPIO_PF2	82
+#define GPIO_PF3	83
+#define GPIO_PF4	84
+#define GPIO_PF5	85
+#define GPIO_PF6	86
+#define GPIO_PF7	87
+#define GPIO_PF8	88
+#define GPIO_PF9	89
+#define GPIO_PF10	90
+#define GPIO_PF11	91
+#define GPIO_PF12	92
+#define GPIO_PF13	93
+#define GPIO_PF14	94
+#define GPIO_PF15	95
+#define GPIO_PG0	96
+#define GPIO_PG1	97
+#define GPIO_PG2	98
+#define GPIO_PG3	99
+#define GPIO_PG4	100
+#define GPIO_PG5	101
+#define GPIO_PG6	102
+#define GPIO_PG7	103
+#define GPIO_PG8	104
+#define GPIO_PG9	105
+#define GPIO_PG10	106
+#define GPIO_PG11	107
+#define GPIO_PG12	108
+#define GPIO_PG13	109
+#define GPIO_PG14	110
+#define GPIO_PG15	111
+#define GPIO_PH0	112
+#define GPIO_PH1	113
+#define GPIO_PH2	114
+#define GPIO_PH3	115
+#define GPIO_PH4	116
+#define GPIO_PH5	117
+#define GPIO_PH6	118
+#define GPIO_PH7	119
+#define GPIO_PH8	120
+#define GPIO_PH9	121
+#define GPIO_PH10	122
+#define GPIO_PH11	123
+#define GPIO_PH12	124
+#define GPIO_PH13	125
+#define GPIO_PH14	126	/* N/A */
+#define GPIO_PH15	127	/* N/A */
+#define GPIO_PI0	128
+#define GPIO_PI1	129
+#define GPIO_PI2	130
+#define GPIO_PI3	131
+#define GPIO_PI4	132
+#define GPIO_PI5	133
+#define GPIO_PI6	134
+#define GPIO_PI7	135
+#define GPIO_PI8	136
+#define GPIO_PI9	137
+#define GPIO_PI10	138
+#define GPIO_PI11	139
+#define GPIO_PI12	140
+#define GPIO_PI13	141
+#define GPIO_PI14	142
+#define GPIO_PI15	143
+#define GPIO_PJ0	144
+#define GPIO_PJ1	145
+#define GPIO_PJ2	146
+#define GPIO_PJ3	147
+#define GPIO_PJ4	148
+#define GPIO_PJ5	149
+#define GPIO_PJ6	150
+#define GPIO_PJ7	151
+#define GPIO_PJ8	152
+#define GPIO_PJ9	153
+#define GPIO_PJ10	154
+#define GPIO_PJ11	155
+#define GPIO_PJ12	156
+#define GPIO_PJ13	157
+#define GPIO_PJ14	158	/* N/A */
+#define GPIO_PJ15	159	/* N/A */
+
+#define MAX_BLACKFIN_GPIOS 160
+
+struct gpio_port_t {
+	unsigned short port_fer;
+	unsigned short dummy1;
+	unsigned short port_data;
+	unsigned short dummy2;
+	unsigned short port_set;
+	unsigned short dummy3;
+	unsigned short port_clear;
+	unsigned short dummy4;
+	unsigned short port_dir_set;
+	unsigned short dummy5;
+	unsigned short port_dir_clear;
+	unsigned short dummy6;
+	unsigned short port_inen;
+	unsigned short dummy7;
+	unsigned int port_mux;
+};
+
+struct gpio_port_s {
+	unsigned short fer;
+	unsigned short data;
+	unsigned short dir;
+	unsigned short inen;
+	unsigned int mux;
+};
diff --git a/include/asm-blackfin/mach-bf548/irq.h b/arch/blackfin/mach-bf548/include/mach/irq.h
index ad380d1f5872..ad380d1f5872 100644
--- a/include/asm-blackfin/mach-bf548/irq.h
+++ b/arch/blackfin/mach-bf548/include/mach/irq.h
diff --git a/include/asm-blackfin/mach-bf548/mem_init.h b/arch/blackfin/mach-bf548/include/mach/mem_init.h
index ab0b863eee66..ab0b863eee66 100644
--- a/include/asm-blackfin/mach-bf548/mem_init.h
+++ b/arch/blackfin/mach-bf548/include/mach/mem_init.h
diff --git a/include/asm-blackfin/mach-bf548/mem_map.h b/arch/blackfin/mach-bf548/include/mach/mem_map.h
index f99f47bc3a07..f99f47bc3a07 100644
--- a/include/asm-blackfin/mach-bf548/mem_map.h
+++ b/arch/blackfin/mach-bf548/include/mach/mem_map.h
diff --git a/include/asm-blackfin/mach-bf548/portmux.h b/arch/blackfin/mach-bf548/include/mach/portmux.h
index 8177a567dcdb..8177a567dcdb 100644
--- a/include/asm-blackfin/mach-bf548/portmux.h
+++ b/arch/blackfin/mach-bf548/include/mach/portmux.h
diff --git a/arch/blackfin/mach-bf548/ints-priority.c b/arch/blackfin/mach-bf548/ints-priority.c
index 2665653cee37..9dd0fa3ac4de 100644
--- a/arch/blackfin/mach-bf548/ints-priority.c
+++ b/arch/blackfin/mach-bf548/ints-priority.c
@@ -31,7 +31,7 @@
 #include <linux/irq.h>
 #include <asm/blackfin.h>
 
-void program_IAR(void)
+void __init program_IAR(void)
 {
 	/* Program the IAR0 Register with the configured priority */
 	bfin_write_SIC_IAR0(((CONFIG_IRQ_PLL_WAKEUP - 7) << IRQ_PLL_WAKEUP_POS) |
diff --git a/arch/blackfin/mach-bf561/boards/cm_bf561.c b/arch/blackfin/mach-bf561/boards/cm_bf561.c
index 466ef5929a25..8f40990eea2f 100644
--- a/arch/blackfin/mach-bf561/boards/cm_bf561.c
+++ b/arch/blackfin/mach-bf561/boards/cm_bf561.c
@@ -54,16 +54,16 @@ const char bfin_board_name[] = "Bluetechnix CM BF561";
 #if defined(CONFIG_MTD_M25P80) || defined(CONFIG_MTD_M25P80_MODULE)
 static struct mtd_partition bfin_spi_flash_partitions[] = {
 	{
-		.name = "bootloader",
+		.name = "bootloader(spi)",
 		.size = 0x00020000,
 		.offset = 0,
 		.mask_flags = MTD_CAP_ROM
 	}, {
-		.name = "kernel",
+		.name = "linux kernel(spi)",
 		.size = 0xe0000,
 		.offset = 0x20000
 	}, {
-		.name = "file system",
+		.name = "file system(spi)",
 		.size = 0x700000,
 		.offset = 0x00100000,
 	}
@@ -306,7 +306,7 @@ static struct platform_device bfin_sir_device = {
 #endif
 
 #if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
-#define PATA_INT	119
+#define PATA_INT	IRQ_PF46
 
 static struct pata_platform_info bfin_pata_platform_data = {
 	.ioport_shift = 2,
diff --git a/arch/blackfin/mach-bf561/boards/ezkit.c b/arch/blackfin/mach-bf561/boards/ezkit.c
index bc6feded8569..50b4cdceccfe 100644
--- a/arch/blackfin/mach-bf561/boards/ezkit.c
+++ b/arch/blackfin/mach-bf561/boards/ezkit.c
@@ -35,7 +35,6 @@
 #include <linux/spi/spi.h>
 #include <linux/irq.h>
 #include <linux/interrupt.h>
-#include <linux/ata_platform.h>
 #include <asm/dma.h>
 #include <asm/bfin5xx_spi.h>
 #include <asm/portmux.h>
@@ -243,15 +242,15 @@ static struct platform_device bfin_sir_device = {
 #if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
 static struct mtd_partition ezkit_partitions[] = {
 	{
-		.name       = "Bootloader",
+		.name       = "bootloader(nor)",
 		.size       = 0x40000,
 		.offset     = 0,
 	}, {
-		.name       = "Kernel",
+		.name       = "linux kernel(nor)",
 		.size       = 0x1C0000,
 		.offset     = MTDPART_OFS_APPEND,
 	}, {
-		.name       = "RootFS",
+		.name       = "file system(nor)",
 		.size       = MTDPART_SIZ_FULL,
 		.offset     = MTDPART_OFS_APPEND,
 	}
@@ -350,43 +349,6 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
 #endif
 };
 
-#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
-#define PATA_INT	55
-
-static struct pata_platform_info bfin_pata_platform_data = {
-	.ioport_shift = 1,
-	.irq_type = IRQF_TRIGGER_HIGH | IRQF_DISABLED,
-};
-
-static struct resource bfin_pata_resources[] = {
-	{
-		.start = 0x20314020,
-		.end = 0x2031403F,
-		.flags = IORESOURCE_MEM,
-	},
-	{
-		.start = 0x2031401C,
-		.end = 0x2031401F,
-		.flags = IORESOURCE_MEM,
-	},
-	{
-		.start = PATA_INT,
-		.end = PATA_INT,
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device bfin_pata_device = {
-	.name = "pata_platform",
-	.id = -1,
-	.num_resources = ARRAY_SIZE(bfin_pata_resources),
-	.resource = bfin_pata_resources,
-	.dev = {
-		.platform_data = &bfin_pata_platform_data,
-	}
-};
-#endif
-
 #if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
 #include <linux/input.h>
 #include <linux/gpio_keys.h>
@@ -499,10 +461,6 @@ static struct platform_device *ezkit_devices[] __initdata = {
 	&bfin_sir_device,
 #endif
 
-#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
-	&bfin_pata_device,
-#endif
-
 #if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
 	&bfin_device_gpiokeys,
 #endif
@@ -538,10 +496,6 @@ static int __init ezkit_init(void)
 #endif
 
 	spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info));
-
-#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
-	irq_desc[PATA_INT].status |= IRQ_NOAUTOEN;
-#endif
 	return 0;
 }
 
diff --git a/arch/blackfin/mach-bf561/head.S b/arch/blackfin/mach-bf561/head.S
index 5b8bd40851dd..75ea6a905829 100644
--- a/arch/blackfin/mach-bf561/head.S
+++ b/arch/blackfin/mach-bf561/head.S
@@ -30,284 +30,13 @@
 #include <linux/linkage.h>
 #include <linux/init.h>
 #include <asm/blackfin.h>
-#include <asm/trace.h>
-
-#if CONFIG_BFIN_KERNEL_CLOCK
-#include <asm/mach-common/clocks.h>
-#include <asm/mach/mem_init.h>
-#endif
-
-.extern ___bss_stop
-.extern ___bss_start
-.extern _bf53x_relocate_l1_mem
-
-#define INITIAL_STACK	0xFFB01000
-
-__INIT
-
-ENTRY(__start)
-	/* R0: argument of command line string, passed from uboot, save it */
-	R7 = R0;
-	/* Enable Cycle Counter and Nesting Of Interrupts */
-#ifdef CONFIG_BFIN_SCRATCH_REG_CYCLES
-	R0 = SYSCFG_SNEN;
-#else
-	R0 = SYSCFG_SNEN | SYSCFG_CCEN;
-#endif
-	SYSCFG = R0;
-	R0 = 0;
-
-	/* Clear Out All the data and pointer Registers */
-	R1 = R0;
-	R2 = R0;
-	R3 = R0;
-	R4 = R0;
-	R5 = R0;
-	R6 = R0;
-
-	P0 = R0;
-	P1 = R0;
-	P2 = R0;
-	P3 = R0;
-	P4 = R0;
-	P5 = R0;
-
-	LC0 = r0;
-	LC1 = r0;
-	L0 = r0;
-	L1 = r0;
-	L2 = r0;
-	L3 = r0;
-
-	/* Clear Out All the DAG Registers */
-	B0 = r0;
-	B1 = r0;
-	B2 = r0;
-	B3 = r0;
-
-	I0 = r0;
-	I1 = r0;
-	I2 = r0;
-	I3 = r0;
-
-	M0 = r0;
-	M1 = r0;
-	M2 = r0;
-	M3 = r0;
-
-	trace_buffer_init(p0,r0);
-	P0 = R1;
-	R0 = R1;
-
-	/* Turn off the icache */
-	p0.l = LO(IMEM_CONTROL);
-	p0.h = HI(IMEM_CONTROL);
-	R1 = [p0];
-	R0 = ~ENICPLB;
-	R0 = R0 & R1;
-
-#if ANOMALY_05000125
-	CLI R2;
-	SSYNC;
-#endif
-	[p0] = R0;
-	SSYNC;
-#if ANOMALY_05000125
-	STI R2;
+#ifdef CONFIG_BFIN_KERNEL_CLOCK
+#include <asm/clocks.h>
+#include <mach/mem_init.h>
 #endif
 
-	/* Turn off the dcache */
-	p0.l = LO(DMEM_CONTROL);
-	p0.h = HI(DMEM_CONTROL);
-	R1 = [p0];
-	R0 = ~ENDCPLB;
-	R0 = R0 & R1;
-
-	/* Anomaly 05000125 */
-#if ANOMALY_05000125
-	CLI R2;
-	SSYNC;
-#endif
-	[p0] = R0;
-	SSYNC;
-#if ANOMALY_05000125
-	STI R2;
-#endif
-
-	/* Initialise UART - when booting from u-boot, the UART is not disabled
-	 * so if we dont initalize here, our serial console gets hosed */
-	p0.h = hi(BFIN_UART_LCR);
-	p0.l = lo(BFIN_UART_LCR);
-	r0 = 0x0(Z);
-	w[p0] = r0.L;	/* To enable DLL writes */
-	ssync;
-
-	p0.h = hi(BFIN_UART_DLL);
-	p0.l = lo(BFIN_UART_DLL);
-	r0 = 0x0(Z);
-	w[p0] = r0.L;
-	ssync;
-
-	p0.h = hi(BFIN_UART_DLH);
-	p0.l = lo(BFIN_UART_DLH);
-	r0 = 0x00(Z);
-	w[p0] = r0.L;
-	ssync;
-
-	p0.h = hi(BFIN_UART_GCTL);
-	p0.l = lo(BFIN_UART_GCTL);
-	r0 = 0x0(Z);
-	w[p0] = r0.L;	/* To enable UART clock */
-	ssync;
-
-	/* Initialize stack pointer */
-	sp.l = lo(INITIAL_STACK);
-	sp.h = hi(INITIAL_STACK);
-	fp = sp;
-	usp = sp;
-
-#ifdef CONFIG_EARLY_PRINTK
-	SP += -12;
-	call _init_early_exception_vectors;
-	SP += 12;
-#endif
-
-	/* Put The Code for PLL Programming and SDRAM Programming in L1 ISRAM */
-	call _bf53x_relocate_l1_mem;
-#if CONFIG_BFIN_KERNEL_CLOCK
-	call _start_dma_code;
-#endif
-
-	/* Code for initializing Async memory banks */
-
-	p2.h = hi(EBIU_AMBCTL1);
-	p2.l = lo(EBIU_AMBCTL1);
-	r0.h = hi(AMBCTL1VAL);
-	r0.l = lo(AMBCTL1VAL);
-	[p2] = r0;
-	ssync;
-
-	p2.h = hi(EBIU_AMBCTL0);
-	p2.l = lo(EBIU_AMBCTL0);
-	r0.h = hi(AMBCTL0VAL);
-	r0.l = lo(AMBCTL0VAL);
-	[p2] = r0;
-	ssync;
-
-	p2.h = hi(EBIU_AMGCTL);
-	p2.l = lo(EBIU_AMGCTL);
-	r0 = AMGCTLVAL;
-	w[p2] = r0;
-	ssync;
-
-	/* This section keeps the processor in supervisor mode
-	 * during kernel boot.  Switches to user mode at end of boot.
-	 * See page 3-9 of Hardware Reference manual for documentation.
-	 */
-
-	/* EVT15 = _real_start */
-
-	p0.l = lo(EVT15);
-	p0.h = hi(EVT15);
-	p1.l = _real_start;
-	p1.h = _real_start;
-	[p0] = p1;
-	csync;
-
-	p0.l = lo(IMASK);
-	p0.h = hi(IMASK);
-	p1.l = IMASK_IVG15;
-	p1.h = 0x0;
-	[p0] = p1;
-	csync;
-
-	raise 15;
-	p0.l = .LWAIT_HERE;
-	p0.h = .LWAIT_HERE;
-	reti = p0;
-#if ANOMALY_05000281
-	nop; nop; nop;
-#endif
-	rti;
-
-.LWAIT_HERE:
-	jump .LWAIT_HERE;
-ENDPROC(__start)
-
-ENTRY(_real_start)
-	[ -- sp ] = reti;
-	p0.l = lo(WDOGA_CTL);
-	p0.h = hi(WDOGA_CTL);
-	r0 = 0xAD6(z);
-	w[p0] = r0;	/* watchdog off for now */
-	ssync;
-
-	/* Code update for BSS size == 0
-	 * Zero out the bss region.
-	 */
-
-	p1.l = ___bss_start;
-	p1.h = ___bss_start;
-	p2.l = ___bss_stop;
-	p2.h = ___bss_stop;
-	r0 = 0;
-	p2 -= p1;
-	lsetup (.L_clear_bss, .L_clear_bss) lc0 = p2;
-.L_clear_bss:
-	B[p1++] = r0;
-
-	/* In case there is a NULL pointer reference
-	 * Zero out region before stext
-	 */
-
-	p1.l = 0x0;
-	p1.h = 0x0;
-	r0.l = __stext;
-	r0.h = __stext;
-	r0 = r0 >> 1;
-	p2 = r0;
-	r0 = 0;
-	lsetup (.L_clear_zero, .L_clear_zero) lc0 = p2;
-.L_clear_zero:
-	W[p1++] = r0;
-
-	/* pass the uboot arguments to the global value command line */
-	R0 = R7;
-	call _cmdline_init;
-
-	p1.l = __rambase;
-	p1.h = __rambase;
-	r0.l = __sdata;
-	r0.h = __sdata;
-	[p1] = r0;
-
-	p1.l = __ramstart;
-	p1.h = __ramstart;
-	p3.l = ___bss_stop;
-	p3.h = ___bss_stop;
-
-	r1 = p3;
-	[p1] = r1;
-
-	/*
-	 * load the current thread pointer and stack
-	 */
-	r1.l = _init_thread_union;
-	r1.h = _init_thread_union;
-
-	r2.l = 0x2000;
-	r2.h = 0x0000;
-	r1 = r1 + r2;
-	sp = r1;
-	usp = sp;
-	fp = sp;
-	jump.l _start_kernel;
-ENDPROC(_real_start)
-
-__FINIT
-
 .section .l1.text
-#if CONFIG_BFIN_KERNEL_CLOCK
+#ifdef CONFIG_BFIN_KERNEL_CLOCK
 ENTRY(_start_dma_code)
 	p0.h = hi(SICA_IWR0);
 	p0.l = lo(SICA_IWR0);
@@ -377,12 +106,6 @@ ENTRY(_start_dma_code)
 	w[p0] = r0.l;
 	ssync;
 
-	p0.l = LO(EBIU_SDBCTL);
-	p0.h = HI(EBIU_SDBCTL);     /* SDRAM Memory Bank Control Register */
-	r0 = mem_SDBCTL;
-	w[p0] = r0.l;
-	ssync;
-
 	P2.H = hi(EBIU_SDGCTL);
 	P2.L = lo(EBIU_SDGCTL);
 	R0 = [P2];
diff --git a/include/asm-blackfin/mach-bf561/anomaly.h b/arch/blackfin/mach-bf561/include/mach/anomaly.h
index 5c5d7d7d695f..5c5d7d7d695f 100644
--- a/include/asm-blackfin/mach-bf561/anomaly.h
+++ b/arch/blackfin/mach-bf561/include/mach/anomaly.h
diff --git a/include/asm-blackfin/mach-bf561/bf561.h b/arch/blackfin/mach-bf561/include/mach/bf561.h
index 3ef9e5f36136..3ef9e5f36136 100644
--- a/include/asm-blackfin/mach-bf561/bf561.h
+++ b/arch/blackfin/mach-bf561/include/mach/bf561.h
diff --git a/include/asm-blackfin/mach-bf561/bfin_serial_5xx.h b/arch/blackfin/mach-bf561/include/mach/bfin_serial_5xx.h
index 8aa02780e642..8aa02780e642 100644
--- a/include/asm-blackfin/mach-bf561/bfin_serial_5xx.h
+++ b/arch/blackfin/mach-bf561/include/mach/bfin_serial_5xx.h
diff --git a/arch/blackfin/mach-bf561/include/mach/bfin_sir.h b/arch/blackfin/mach-bf561/include/mach/bfin_sir.h
new file mode 100644
index 000000000000..9bb87e9e2e9b
--- /dev/null
+++ b/arch/blackfin/mach-bf561/include/mach/bfin_sir.h
@@ -0,0 +1,125 @@
+/*
+ * Blackfin Infra-red Driver
+ *
+ * Copyright 2006-2008 Analog Devices Inc.
+ *
+ * Enter bugs at http://blackfin.uclinux.org/
+ *
+ * Licensed under the GPL-2 or later.
+ *
+ */
+
+#include <linux/serial.h>
+#include <asm/dma.h>
+#include <asm/portmux.h>
+
+#define SIR_UART_GET_CHAR(port)   bfin_read16((port)->membase + OFFSET_RBR)
+#define SIR_UART_GET_DLL(port)    bfin_read16((port)->membase + OFFSET_DLL)
+#define SIR_UART_GET_IER(port)    bfin_read16((port)->membase + OFFSET_IER)
+#define SIR_UART_GET_DLH(port)    bfin_read16((port)->membase + OFFSET_DLH)
+#define SIR_UART_GET_IIR(port)    bfin_read16((port)->membase + OFFSET_IIR)
+#define SIR_UART_GET_LCR(port)    bfin_read16((port)->membase + OFFSET_LCR)
+#define SIR_UART_GET_GCTL(port)   bfin_read16((port)->membase + OFFSET_GCTL)
+
+#define SIR_UART_PUT_CHAR(port, v) bfin_write16(((port)->membase + OFFSET_THR), v)
+#define SIR_UART_PUT_DLL(port, v)  bfin_write16(((port)->membase + OFFSET_DLL), v)
+#define SIR_UART_PUT_IER(port, v)  bfin_write16(((port)->membase + OFFSET_IER), v)
+#define SIR_UART_PUT_DLH(port, v)  bfin_write16(((port)->membase + OFFSET_DLH), v)
+#define SIR_UART_PUT_LCR(port, v)  bfin_write16(((port)->membase + OFFSET_LCR), v)
+#define SIR_UART_PUT_GCTL(port, v) bfin_write16(((port)->membase + OFFSET_GCTL), v)
+
+#ifdef CONFIG_SIR_BFIN_DMA
+struct dma_rx_buf {
+	char *buf;
+	int head;
+	int tail;
+	};
+#endif /* CONFIG_SIR_BFIN_DMA */
+
+struct bfin_sir_port {
+	unsigned char __iomem   *membase;
+	unsigned int            irq;
+	unsigned int            lsr;
+	unsigned long           clk;
+	struct net_device       *dev;
+#ifdef CONFIG_SIR_BFIN_DMA
+	int                     tx_done;
+	struct dma_rx_buf       rx_dma_buf;
+	struct timer_list       rx_dma_timer;
+	int                     rx_dma_nrows;
+#endif /* CONFIG_SIR_BFIN_DMA */
+	unsigned int            tx_dma_channel;
+	unsigned int            rx_dma_channel;
+};
+
+struct bfin_sir_port sir_ports[BFIN_UART_NR_PORTS];
+
+struct bfin_sir_port_res {
+	unsigned long   base_addr;
+	int             irq;
+	unsigned int    rx_dma_channel;
+	unsigned int    tx_dma_channel;
+};
+
+struct bfin_sir_port_res bfin_sir_port_resource[] = {
+#ifdef CONFIG_BFIN_SIR0
+	{
+	0xFFC00400,
+	IRQ_UART_RX,
+	CH_UART_RX,
+	CH_UART_TX,
+	},
+#endif
+};
+
+int nr_sirs = ARRAY_SIZE(bfin_sir_port_resource);
+
+struct bfin_sir_self {
+	struct bfin_sir_port    *sir_port;
+	spinlock_t              lock;
+	unsigned int            open;
+	int                     speed;
+	int                     newspeed;
+
+	struct sk_buff          *txskb;
+	struct sk_buff          *rxskb;
+	struct net_device_stats stats;
+	struct device           *dev;
+	struct irlap_cb         *irlap;
+	struct qos_info         qos;
+
+	iobuff_t                tx_buff;
+	iobuff_t                rx_buff;
+
+	struct work_struct      work;
+	int                     mtt;
+};
+
+static inline unsigned int SIR_UART_GET_LSR(struct bfin_sir_port *port)
+{
+	unsigned int lsr = bfin_read16(port->membase + OFFSET_LSR);
+	port->lsr |= (lsr & (BI|FE|PE|OE));
+	return lsr | port->lsr;
+}
+
+static inline void SIR_UART_CLEAR_LSR(struct bfin_sir_port *port)
+{
+	port->lsr = 0;
+	bfin_read16(port->membase + OFFSET_LSR);
+}
+
+#define DRIVER_NAME "bfin_sir"
+
+static int bfin_sir_hw_init(void)
+{
+	int ret = -ENODEV;
+#ifdef CONFIG_BFIN_SIR0
+	ret = peripheral_request(P_UART0_TX, DRIVER_NAME);
+	if (ret)
+		return ret;
+	ret = peripheral_request(P_UART0_RX, DRIVER_NAME);
+	if (ret)
+		return ret;
+#endif
+	return ret;
+}
diff --git a/include/asm-blackfin/mach-bf561/blackfin.h b/arch/blackfin/mach-bf561/include/mach/blackfin.h
index 0ea8666e6764..0ea8666e6764 100644
--- a/include/asm-blackfin/mach-bf561/blackfin.h
+++ b/arch/blackfin/mach-bf561/include/mach/blackfin.h
diff --git a/include/asm-blackfin/mach-bf561/cdefBF561.h b/arch/blackfin/mach-bf561/include/mach/cdefBF561.h
index b07ffccd66dd..c14d63402e70 100644
--- a/include/asm-blackfin/mach-bf561/cdefBF561.h
+++ b/arch/blackfin/mach-bf561/include/mach/cdefBF561.h
@@ -37,7 +37,7 @@
 #include "defBF561.h"
 
 /*include core specific register pointer definitions*/
-#include <asm/mach-common/cdef_LPBlackfin.h>
+#include <asm/cdef_LPBlackfin.h>
 
 #include <asm/system.h>
 
diff --git a/include/asm-blackfin/mach-bf561/defBF561.h b/arch/blackfin/mach-bf561/include/mach/defBF561.h
index 1ab50e906fe7..4eca2026bb92 100644
--- a/include/asm-blackfin/mach-bf561/defBF561.h
+++ b/arch/blackfin/mach-bf561/include/mach/defBF561.h
@@ -37,7 +37,7 @@
 #endif
 */
 /* include all Core registers and bit definitions */
-#include <asm/mach-common/def_LPBlackfin.h>
+#include <asm/def_LPBlackfin.h>
 
 /*********************************************************************************** */
 /* System MMR Register Map */
diff --git a/include/asm-blackfin/mach-bf561/dma.h b/arch/blackfin/mach-bf561/include/mach/dma.h
index 8bc46cd89a02..8bc46cd89a02 100644
--- a/include/asm-blackfin/mach-bf561/dma.h
+++ b/arch/blackfin/mach-bf561/include/mach/dma.h
diff --git a/include/asm-blackfin/mach-bf561/irq.h b/arch/blackfin/mach-bf561/include/mach/irq.h
index 6698389c5564..6698389c5564 100644
--- a/include/asm-blackfin/mach-bf561/irq.h
+++ b/arch/blackfin/mach-bf561/include/mach/irq.h
diff --git a/arch/blackfin/mach-bf561/include/mach/mem_init.h b/arch/blackfin/mach-bf561/include/mach/mem_init.h
new file mode 100644
index 000000000000..e163260bca18
--- /dev/null
+++ b/arch/blackfin/mach-bf561/include/mach/mem_init.h
@@ -0,0 +1,295 @@
+/*
+ * File:         include/asm-blackfin/mach-bf561/mem_init.h
+ * Based on:
+ * Author:
+ *
+ * Created:
+ * Description:
+ *
+ * Rev:
+ *
+ * Modified:
+ *
+ * Bugs:         Enter bugs at http://blackfin.uclinux.org/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; see the file COPYING.
+ * If not, write to the Free Software Foundation,
+ * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ */
+
+#if (CONFIG_MEM_MT48LC16M16A2TG_75 || CONFIG_MEM_MT48LC64M4A2FB_7E || CONFIG_MEM_GENERIC_BOARD || CONFIG_MEM_MT48LC8M32B2B5_7)
+#if (CONFIG_SCLK_HZ > 119402985)
+#define SDRAM_tRP       TRP_2
+#define SDRAM_tRP_num   2
+#define SDRAM_tRAS      TRAS_7
+#define SDRAM_tRAS_num  7
+#define SDRAM_tRCD      TRCD_2
+#define SDRAM_tWR       TWR_2
+#endif
+#if (CONFIG_SCLK_HZ > 104477612) && (CONFIG_SCLK_HZ <= 119402985)
+#define SDRAM_tRP       TRP_2
+#define SDRAM_tRP_num   2
+#define SDRAM_tRAS      TRAS_6
+#define SDRAM_tRAS_num  6
+#define SDRAM_tRCD      TRCD_2
+#define SDRAM_tWR       TWR_2
+#endif
+#if (CONFIG_SCLK_HZ > 89552239) && (CONFIG_SCLK_HZ <= 104477612)
+#define SDRAM_tRP       TRP_2
+#define SDRAM_tRP_num   2
+#define SDRAM_tRAS      TRAS_5
+#define SDRAM_tRAS_num  5
+#define SDRAM_tRCD      TRCD_2
+#define SDRAM_tWR       TWR_2
+#endif
+#if (CONFIG_SCLK_HZ > 74626866) && (CONFIG_SCLK_HZ <= 89552239)
+#define SDRAM_tRP       TRP_2
+#define SDRAM_tRP_num   2
+#define SDRAM_tRAS      TRAS_4
+#define SDRAM_tRAS_num  4
+#define SDRAM_tRCD      TRCD_2
+#define SDRAM_tWR       TWR_2
+#endif
+#if (CONFIG_SCLK_HZ > 66666667) && (CONFIG_SCLK_HZ <= 74626866)
+#define SDRAM_tRP       TRP_2
+#define SDRAM_tRP_num   2
+#define SDRAM_tRAS      TRAS_3
+#define SDRAM_tRAS_num  3
+#define SDRAM_tRCD      TRCD_2
+#define SDRAM_tWR       TWR_2
+#endif
+#if (CONFIG_SCLK_HZ > 59701493) && (CONFIG_SCLK_HZ <= 66666667)
+#define SDRAM_tRP       TRP_1
+#define SDRAM_tRP_num   1
+#define SDRAM_tRAS      TRAS_4
+#define SDRAM_tRAS_num  3
+#define SDRAM_tRCD      TRCD_1
+#define SDRAM_tWR       TWR_2
+#endif
+#if (CONFIG_SCLK_HZ > 44776119) && (CONFIG_SCLK_HZ <= 59701493)
+#define SDRAM_tRP       TRP_1
+#define SDRAM_tRP_num   1
+#define SDRAM_tRAS      TRAS_3
+#define SDRAM_tRAS_num  3
+#define SDRAM_tRCD      TRCD_1
+#define SDRAM_tWR       TWR_2
+#endif
+#if (CONFIG_SCLK_HZ > 29850746) && (CONFIG_SCLK_HZ <= 44776119)
+#define SDRAM_tRP       TRP_1
+#define SDRAM_tRP_num   1
+#define SDRAM_tRAS      TRAS_2
+#define SDRAM_tRAS_num  2
+#define SDRAM_tRCD      TRCD_1
+#define SDRAM_tWR       TWR_2
+#endif
+#if (CONFIG_SCLK_HZ <= 29850746)
+#define SDRAM_tRP       TRP_1
+#define SDRAM_tRP_num   1
+#define SDRAM_tRAS      TRAS_1
+#define SDRAM_tRAS_num  1
+#define SDRAM_tRCD      TRCD_1
+#define SDRAM_tWR       TWR_2
+#endif
+#endif
+
+#if (CONFIG_MEM_MT48LC16M16A2TG_75)
+  /*SDRAM INFORMATION: */
+#define SDRAM_Tref  64		/* Refresh period in milliseconds   */
+#define SDRAM_NRA   8192	/* Number of row addresses in SDRAM */
+#define SDRAM_CL    CL_3
+#endif
+
+#if (CONFIG_MEM_MT48LC64M4A2FB_7E)
+  /*SDRAM INFORMATION: */
+#define SDRAM_Tref  64		/* Refresh period in milliseconds   */
+#define SDRAM_NRA   8192	/* Number of row addresses in SDRAM */
+#define SDRAM_CL    CL_3
+#endif
+
+#if (CONFIG_MEM_MT48LC8M32B2B5_7)
+  /*SDRAM INFORMATION: */
+#define SDRAM_Tref  64		/* Refresh period in milliseconds   */
+#define SDRAM_NRA   4096	/* Number of row addresses in SDRAM */
+#define SDRAM_CL    CL_3
+#endif
+
+#if (CONFIG_MEM_GENERIC_BOARD)
+  /*SDRAM INFORMATION: Modify this for your board */
+#define SDRAM_Tref  64		/* Refresh period in milliseconds   */
+#define SDRAM_NRA   8192	/* Number of row addresses in SDRAM */
+#define SDRAM_CL    CL_3
+#endif
+
+/* Equation from section 17 (p17-46) of BF533 HRM */
+#define mem_SDRRC       (((CONFIG_SCLK_HZ / 1000) * SDRAM_Tref) / SDRAM_NRA) - (SDRAM_tRAS_num + SDRAM_tRP_num)
+
+/* Enable SCLK Out */
+#define mem_SDGCTL        (SCTLE | SDRAM_CL | SDRAM_tRAS | SDRAM_tRP | SDRAM_tRCD | SDRAM_tWR | PSS)
+
+#if defined CONFIG_CLKIN_HALF
+#define CLKIN_HALF       1
+#else
+#define CLKIN_HALF       0
+#endif
+
+#if defined CONFIG_PLL_BYPASS
+#define PLL_BYPASS      1
+#else
+#define PLL_BYPASS       0
+#endif
+
+/***************************************Currently Not Being Used *********************************/
+#define flash_EBIU_AMBCTL_WAT  ((CONFIG_FLASH_SPEED_BWAT * 4) / (4000000000 / CONFIG_SCLK_HZ)) + 1
+#define flash_EBIU_AMBCTL_RAT  ((CONFIG_FLASH_SPEED_BRAT * 4) / (4000000000 / CONFIG_SCLK_HZ)) + 1
+#define flash_EBIU_AMBCTL_HT   ((CONFIG_FLASH_SPEED_BHT  * 4) / (4000000000 / CONFIG_SCLK_HZ))
+#define flash_EBIU_AMBCTL_ST   ((CONFIG_FLASH_SPEED_BST  * 4) / (4000000000 / CONFIG_SCLK_HZ)) + 1
+#define flash_EBIU_AMBCTL_TT   ((CONFIG_FLASH_SPEED_BTT  * 4) / (4000000000 / CONFIG_SCLK_HZ)) + 1
+
+#if (flash_EBIU_AMBCTL_TT > 3)
+#define flash_EBIU_AMBCTL0_TT   B0TT_4
+#endif
+#if (flash_EBIU_AMBCTL_TT == 3)
+#define flash_EBIU_AMBCTL0_TT   B0TT_3
+#endif
+#if (flash_EBIU_AMBCTL_TT == 2)
+#define flash_EBIU_AMBCTL0_TT   B0TT_2
+#endif
+#if (flash_EBIU_AMBCTL_TT < 2)
+#define flash_EBIU_AMBCTL0_TT   B0TT_1
+#endif
+
+#if (flash_EBIU_AMBCTL_ST > 3)
+#define flash_EBIU_AMBCTL0_ST   B0ST_4
+#endif
+#if (flash_EBIU_AMBCTL_ST == 3)
+#define flash_EBIU_AMBCTL0_ST   B0ST_3
+#endif
+#if (flash_EBIU_AMBCTL_ST == 2)
+#define flash_EBIU_AMBCTL0_ST   B0ST_2
+#endif
+#if (flash_EBIU_AMBCTL_ST < 2)
+#define flash_EBIU_AMBCTL0_ST   B0ST_1
+#endif
+
+#if (flash_EBIU_AMBCTL_HT > 2)
+#define flash_EBIU_AMBCTL0_HT   B0HT_3
+#endif
+#if (flash_EBIU_AMBCTL_HT == 2)
+#define flash_EBIU_AMBCTL0_HT   B0HT_2
+#endif
+#if (flash_EBIU_AMBCTL_HT == 1)
+#define flash_EBIU_AMBCTL0_HT   B0HT_1
+#endif
+#if (flash_EBIU_AMBCTL_HT == 0 && CONFIG_FLASH_SPEED_BHT == 0)
+#define flash_EBIU_AMBCTL0_HT   B0HT_0
+#endif
+#if (flash_EBIU_AMBCTL_HT == 0 && CONFIG_FLASH_SPEED_BHT != 0)
+#define flash_EBIU_AMBCTL0_HT   B0HT_1
+#endif
+
+#if (flash_EBIU_AMBCTL_WAT > 14)
+#define flash_EBIU_AMBCTL0_WAT  B0WAT_15
+#endif
+#if (flash_EBIU_AMBCTL_WAT == 14)
+#define flash_EBIU_AMBCTL0_WAT  B0WAT_14
+#endif
+#if (flash_EBIU_AMBCTL_WAT == 13)
+#define flash_EBIU_AMBCTL0_WAT  B0WAT_13
+#endif
+#if (flash_EBIU_AMBCTL_WAT == 12)
+#define flash_EBIU_AMBCTL0_WAT  B0WAT_12
+#endif
+#if (flash_EBIU_AMBCTL_WAT == 11)
+#define flash_EBIU_AMBCTL0_WAT  B0WAT_11
+#endif
+#if (flash_EBIU_AMBCTL_WAT == 10)
+#define flash_EBIU_AMBCTL0_WAT  B0WAT_10
+#endif
+#if (flash_EBIU_AMBCTL_WAT == 9)
+#define flash_EBIU_AMBCTL0_WAT  B0WAT_9
+#endif
+#if (flash_EBIU_AMBCTL_WAT == 8)
+#define flash_EBIU_AMBCTL0_WAT  B0WAT_8
+#endif
+#if (flash_EBIU_AMBCTL_WAT == 7)
+#define flash_EBIU_AMBCTL0_WAT  B0WAT_7
+#endif
+#if (flash_EBIU_AMBCTL_WAT == 6)
+#define flash_EBIU_AMBCTL0_WAT  B0WAT_6
+#endif
+#if (flash_EBIU_AMBCTL_WAT == 5)
+#define flash_EBIU_AMBCTL0_WAT  B0WAT_5
+#endif
+#if (flash_EBIU_AMBCTL_WAT == 4)
+#define flash_EBIU_AMBCTL0_WAT  B0WAT_4
+#endif
+#if (flash_EBIU_AMBCTL_WAT == 3)
+#define flash_EBIU_AMBCTL0_WAT  B0WAT_3
+#endif
+#if (flash_EBIU_AMBCTL_WAT == 2)
+#define flash_EBIU_AMBCTL0_WAT  B0WAT_2
+#endif
+#if (flash_EBIU_AMBCTL_WAT == 1)
+#define flash_EBIU_AMBCTL0_WAT  B0WAT_1
+#endif
+
+#if (flash_EBIU_AMBCTL_RAT > 14)
+#define flash_EBIU_AMBCTL0_RAT  B0RAT_15
+#endif
+#if (flash_EBIU_AMBCTL_RAT == 14)
+#define flash_EBIU_AMBCTL0_RAT  B0RAT_14
+#endif
+#if (flash_EBIU_AMBCTL_RAT == 13)
+#define flash_EBIU_AMBCTL0_RAT  B0RAT_13
+#endif
+#if (flash_EBIU_AMBCTL_RAT == 12)
+#define flash_EBIU_AMBCTL0_RAT  B0RAT_12
+#endif
+#if (flash_EBIU_AMBCTL_RAT == 11)
+#define flash_EBIU_AMBCTL0_RAT  B0RAT_11
+#endif
+#if (flash_EBIU_AMBCTL_RAT == 10)
+#define flash_EBIU_AMBCTL0_RAT  B0RAT_10
+#endif
+#if (flash_EBIU_AMBCTL_RAT == 9)
+#define flash_EBIU_AMBCTL0_RAT  B0RAT_9
+#endif
+#if (flash_EBIU_AMBCTL_RAT == 8)
+#define flash_EBIU_AMBCTL0_RAT  B0RAT_8
+#endif
+#if (flash_EBIU_AMBCTL_RAT == 7)
+#define flash_EBIU_AMBCTL0_RAT  B0RAT_7
+#endif
+#if (flash_EBIU_AMBCTL_RAT == 6)
+#define flash_EBIU_AMBCTL0_RAT  B0RAT_6
+#endif
+#if (flash_EBIU_AMBCTL_RAT == 5)
+#define flash_EBIU_AMBCTL0_RAT  B0RAT_5
+#endif
+#if (flash_EBIU_AMBCTL_RAT == 4)
+#define flash_EBIU_AMBCTL0_RAT  B0RAT_4
+#endif
+#if (flash_EBIU_AMBCTL_RAT == 3)
+#define flash_EBIU_AMBCTL0_RAT  B0RAT_3
+#endif
+#if (flash_EBIU_AMBCTL_RAT == 2)
+#define flash_EBIU_AMBCTL0_RAT  B0RAT_2
+#endif
+#if (flash_EBIU_AMBCTL_RAT == 1)
+#define flash_EBIU_AMBCTL0_RAT  B0RAT_1
+#endif
+
+#define flash_EBIU_AMBCTL0  \
+	(flash_EBIU_AMBCTL0_WAT | flash_EBIU_AMBCTL0_RAT | flash_EBIU_AMBCTL0_HT | \
+	 flash_EBIU_AMBCTL0_ST | flash_EBIU_AMBCTL0_TT | CONFIG_FLASH_SPEED_RDYEN)
diff --git a/include/asm-blackfin/mach-bf561/mem_map.h b/arch/blackfin/mach-bf561/include/mach/mem_map.h
index c26d8486cc4b..c26d8486cc4b 100644
--- a/include/asm-blackfin/mach-bf561/mem_map.h
+++ b/arch/blackfin/mach-bf561/include/mach/mem_map.h
diff --git a/include/asm-blackfin/mach-bf561/portmux.h b/arch/blackfin/mach-bf561/include/mach/portmux.h
index a6ee8206efb6..a6ee8206efb6 100644
--- a/include/asm-blackfin/mach-bf561/portmux.h
+++ b/arch/blackfin/mach-bf561/include/mach/portmux.h
diff --git a/arch/blackfin/mach-bf561/ints-priority.c b/arch/blackfin/mach-bf561/ints-priority.c
index 09b541b0f7c2..9d2f23344720 100644
--- a/arch/blackfin/mach-bf561/ints-priority.c
+++ b/arch/blackfin/mach-bf561/ints-priority.c
@@ -31,7 +31,7 @@
 #include <linux/irq.h>
 #include <asm/blackfin.h>
 
-void program_IAR(void)
+void __init program_IAR(void)
 {
 	/* Program the IAR0 Register with the configured priority */
 	bfin_write_SICA_IAR0(((CONFIG_IRQ_PLL_WAKEUP - 7) << IRQ_PLL_WAKEUP_POS) |
diff --git a/arch/blackfin/mach-common/Makefile b/arch/blackfin/mach-common/Makefile
index 422bfee34adc..e6ed57c56d4b 100644
--- a/arch/blackfin/mach-common/Makefile
+++ b/arch/blackfin/mach-common/Makefile
@@ -3,9 +3,10 @@
 #
 
 obj-y := \
-	cache.o cacheinit.o entry.o \
-	interrupt.o lock.o irqpanic.o arch_checks.o ints-priority.o
+	cache.o entry.o head.o \
+	interrupt.o irqpanic.o arch_checks.o ints-priority.o
 
+obj-$(CONFIG_BFIN_ICACHE_LOCK) += lock.o
 obj-$(CONFIG_PM)          += pm.o dpmc_modes.o
 obj-$(CONFIG_CPU_FREQ)    += cpufreq.o
 obj-$(CONFIG_CPU_VOLTAGE) += dpmc.o
diff --git a/arch/blackfin/mach-common/arch_checks.c b/arch/blackfin/mach-common/arch_checks.c
index caaab49e9cfa..98133b968f7b 100644
--- a/arch/blackfin/mach-common/arch_checks.c
+++ b/arch/blackfin/mach-common/arch_checks.c
@@ -27,8 +27,9 @@
  * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
  */
 
-#include <asm/mach/anomaly.h>
-#include <asm/mach-common/clocks.h>
+#include <asm/fixed_code.h>
+#include <mach/anomaly.h>
+#include <asm/clocks.h>
 
 #ifdef CONFIG_BFIN_KERNEL_CLOCK
 
@@ -54,8 +55,10 @@
 
 #endif /* CONFIG_BFIN_KERNEL_CLOCK */
 
-#ifdef CONFIG_MEM_SIZE
-#if (CONFIG_MEM_SIZE % 4)
-#error "SDRAM mem size must be multible of 4MB"
+#if CONFIG_BOOT_LOAD < FIXED_CODE_END
+# error "The kernel load address must be after the fixed code section"
 #endif
+
+#if (CONFIG_BOOT_LOAD & 0x3)
+# error "The kernel load address must be 4 byte aligned"
 #endif
diff --git a/arch/blackfin/mach-common/cache.S b/arch/blackfin/mach-common/cache.S
index 0521b1588204..85f8c79b3c37 100644
--- a/arch/blackfin/mach-common/cache.S
+++ b/arch/blackfin/mach-common/cache.S
@@ -34,81 +34,6 @@
 #include <asm/cache.h>
 
 .text
-.align 2
-ENTRY(_cache_invalidate)
-
-	/*
-	 * Icache or DcacheA or DcacheB Invalidation
-	 * or any combination thereof
-	 * R0 has bits
-	 * CPLB_ENABLE_ICACHE_P,CPLB_ENABLE_DCACHE_P,CPLB_ENABLE_DCACHE2_P
-	 * set as required
-	 */
-	[--SP] = R7;
-
-	R7 = R0;
-	CC = BITTST(R7,CPLB_ENABLE_ICACHE_P);
-	IF !CC JUMP .Lno_icache;
-	[--SP] = RETS;
-	CALL _icache_invalidate;
-	RETS = [SP++];
-.Lno_icache:
-	CC = BITTST(R7,CPLB_ENABLE_DCACHE_P);
-	IF !CC JUMP .Lno_dcache_a;
-	R0 = 0;         /* specifies bank A */
-	[--SP] = RETS;
-	CALL _dcache_invalidate;
-	RETS = [SP++];
-.Lno_dcache_a:
-	CC = BITTST(R7,CPLB_ENABLE_DCACHE2_P);
-	IF !CC JUMP .Lno_dcache_b;
-	R0 = 0;
-	BITSET(R0, 23);		/* specifies bank B */
-	[--SP] = RETS;
-	CALL  _dcache_invalidate;
-	RETS = [SP++];
-.Lno_dcache_b:
-	R7 = [SP++];
-	RTS;
-ENDPROC(_cache_invalidate)
-
-/* Invalidate the Entire Instruction cache by
- * disabling IMC bit
- */
-ENTRY(_icache_invalidate)
-ENTRY(_invalidate_entire_icache)
-	[--SP] = ( R7:5);
-
-	P0.L = LO(IMEM_CONTROL);
-	P0.H = HI(IMEM_CONTROL);
-	R7 = [P0];
-
-	/* Clear the IMC bit , All valid bits in the instruction
-	 * cache are set to the invalid state
-	 */
-	BITCLR(R7,IMC_P);
-	CLI R6;
-	SSYNC;		/* SSYNC required before invalidating cache. */
-	.align 8;
-	[P0] = R7;
-	SSYNC;
-	STI R6;
-
-	/* Configures the instruction cache agian */
-	R6 = (IMC | ENICPLB);
-	R7 = R7 | R6;
-
-	CLI R6;
-	SSYNC;		/* SSYNC required before writing to IMEM_CONTROL. */
-	.align 8;
-	[P0] = R7;
-	SSYNC;
-	STI R6;
-
-	( R7:5) = [SP++];
-	RTS;
-ENDPROC(_invalidate_entire_icache)
-ENDPROC(_icache_invalidate)
 
 /*
  * blackfin_cache_flush_range(start, end)
@@ -190,46 +115,6 @@ ENTRY(_blackfin_dcache_invalidate_range)
 	RTS;
 ENDPROC(_blackfin_dcache_invalidate_range)
 
-/* Invalidate the Entire Data cache by
- * clearing DMC[1:0] bits
- */
-ENTRY(_invalidate_entire_dcache)
-ENTRY(_dcache_invalidate)
-	[--SP] = ( R7:6);
-
-	P0.L = LO(DMEM_CONTROL);
-	P0.H = HI(DMEM_CONTROL);
-	R7 = [P0];
-
-	/* Clear the DMC[1:0] bits, All valid bits in the data
-	 * cache are set to the invalid state
-	 */
-	BITCLR(R7,DMC0_P);
-	BITCLR(R7,DMC1_P);
-	CLI R6;
-	SSYNC;		/* SSYNC required before writing to DMEM_CONTROL. */
-	.align 8;
-	[P0] = R7;
-	SSYNC;
-	STI R6;
-
-	/* Configures the data cache again */
-
-	R6 = DMEM_CNTR;
-	R7 = R7 | R6;
-
-	CLI R6;
-	SSYNC;		/* SSYNC required before writing to DMEM_CONTROL. */
-	.align 8;
-	[P0] = R7;
-	SSYNC;
-	STI R6;
-
-	( R7:6) = [SP++];
-	RTS;
-ENDPROC(_dcache_invalidate)
-ENDPROC(_invalidate_entire_dcache)
-
 ENTRY(_blackfin_dcache_flush_range)
 	R2 = -L1_CACHE_BYTES;
 	R2 = R0 & R2;
diff --git a/arch/blackfin/mach-common/cacheinit.S b/arch/blackfin/mach-common/cacheinit.S
deleted file mode 100644
index 22fada0c1cb3..000000000000
--- a/arch/blackfin/mach-common/cacheinit.S
+++ /dev/null
@@ -1,77 +0,0 @@
-/*
- * File:         arch/blackfin/mach-common/cacheinit.S
- * Based on:
- * Author:       LG Soft India
- *
- * Created:      ?
- * Description:  cache initialization
- *
- * Modified:
- *               Copyright 2004-2006 Analog Devices Inc.
- *
- * Bugs:         Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, see the file COPYING, or write
- * to the Free Software Foundation, Inc.,
- * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
- */
-
-/* This function sets up the data and instruction cache. The
- * tables like icplb table, dcplb table and Page Descriptor table
- * are defined in cplbtab.h. You can configure those tables for
- * your suitable requirements
- */
-
-#include <linux/linkage.h>
-#include <asm/blackfin.h>
-
-.text
-
-#if ANOMALY_05000125
-#if defined(CONFIG_BFIN_ICACHE)
-ENTRY(_bfin_write_IMEM_CONTROL)
-
-	/* Enable Instruction Cache */
-	P0.l = LO(IMEM_CONTROL);
-	P0.h = HI(IMEM_CONTROL);
-
-	/* Anomaly 05000125 */
-	CLI R1;
-	SSYNC;		/* SSYNC required before writing to IMEM_CONTROL. */
-	.align 8;
-	[P0] = R0;
-	SSYNC;
-	STI R1;
-	RTS;
-
-ENDPROC(_bfin_write_IMEM_CONTROL)
-#endif
-
-#if defined(CONFIG_BFIN_DCACHE)
-ENTRY(_bfin_write_DMEM_CONTROL)
-	P0.l = LO(DMEM_CONTROL);
-	P0.h = HI(DMEM_CONTROL);
-
-	CLI R1;
-	SSYNC;		/* SSYNC required before writing to DMEM_CONTROL. */
-	.align 8;
-	[P0] = R0;
-	SSYNC;
-	STI R1;
-	RTS;
-
-ENDPROC(_bfin_write_DMEM_CONTROL)
-#endif
-
-#endif
diff --git a/arch/blackfin/mach-common/dpmc_modes.S b/arch/blackfin/mach-common/dpmc_modes.S
index b7981d31c392..ad5431e2cd05 100644
--- a/arch/blackfin/mach-common/dpmc_modes.S
+++ b/arch/blackfin/mach-common/dpmc_modes.S
@@ -6,8 +6,8 @@
 
 #include <linux/linkage.h>
 #include <asm/blackfin.h>
-#include <asm/mach/irq.h>
-
+#include <mach/irq.h>
+#include <asm/dpmc.h>
 
 .section .l1.text
 
@@ -51,86 +51,32 @@ ENTRY(_sleep_mode)
 	RETS = [SP++];
 	( R7:0, P5:0 ) = [SP++];
 	RTS;
+ENDPROC(_sleep_mode)
 
 ENTRY(_hibernate_mode)
 	[--SP] = ( R7:0, P5:0 );
 	[--SP] =  RETS;
 
+	R3 = R0;
+	R0 = IWR_DISABLE_ALL;
+	R1 = IWR_DISABLE_ALL;
+	R2 = IWR_DISABLE_ALL;
 	call _set_sic_iwr;
+	call _set_dram_srfs;
+	SSYNC;
 
 	R0 = 0xFFFF (Z);
 	call _set_rtc_istat;
 
 	P0.H = hi(VR_CTL);
 	P0.L = lo(VR_CTL);
-	R1 = W[P0](z);
-	BITSET (R1, 8);
-	BITCLR (R1, 0);
-	BITCLR (R1, 1);
-	W[P0] = R1.L;
-	SSYNC;
 
+	W[P0] = R3.L;
 	CLI R2;
 	IDLE;
-
-	/* Actually, adding anything may not be necessary...SDRAM contents
-	 * are lost
-	 */
-
-ENTRY(_deep_sleep)
-	[--SP] = ( R7:0, P5:0 );
-	[--SP] =  RETS;
-
-	CLI R4;
-
-	R0 = IWR_ENABLE(0);
-	R1 = IWR_DISABLE_ALL;
-	R2 = IWR_DISABLE_ALL;
-
-	call _set_sic_iwr;
-
-	call _set_dram_srfs;
-
-	/* Clear all the interrupts,bits sticky */
-	R0 = 0xFFFF (Z);
-	call _set_rtc_istat
-
-	P0.H = hi(PLL_CTL);
-	P0.L = lo(PLL_CTL);
-	R0 = W[P0](z);
-	BITSET (R0, 5);
-	W[P0] = R0.L;
-
-	call _test_pll_locked;
-
-	SSYNC;
-	IDLE;
-
-	call _unset_dram_srfs;
-
-	call _test_pll_locked;
-
-	R0 = IWR_ENABLE(0);
-	R1 = IWR_DISABLE_ALL;
-	R2 = IWR_DISABLE_ALL;
-
-	call _set_sic_iwr;
-
-	P0.H = hi(PLL_CTL);
-	P0.L = lo(PLL_CTL);
-	R0 = w[p0](z);
-	BITCLR (R0, 3);
-	BITCLR (R0, 5);
-	BITCLR (R0, 8);
-	w[p0] = R0;
-	IDLE;
-	call _test_pll_locked;
-
-	STI R4;
-
-	RETS = [SP++];
-	( R7:0, P5:0 ) = [SP++];
-	RTS;
+.Lforever:
+	jump .Lforever;
+ENDPROC(_hibernate_mode)
 
 ENTRY(_sleep_deeper)
 	[--SP] = ( R7:0, P5:0 );
@@ -232,53 +178,73 @@ ENTRY(_sleep_deeper)
 	RETS = [SP++];
 	( R7:0, P5:0 ) = [SP++];
 	RTS;
+ENDPROC(_sleep_deeper)
 
 ENTRY(_set_dram_srfs)
 	/*  set the dram to self refresh mode */
-#if defined(CONFIG_BF54x)
+	SSYNC;
+#if defined(EBIU_RSTCTL)	/* DDR */
 	P0.H = hi(EBIU_RSTCTL);
 	P0.L = lo(EBIU_RSTCTL);
 	R2 = [P0];
-	R3.H = hi(SRREQ);
-	R3.L = lo(SRREQ);
-#else
-	P0.H = hi(EBIU_SDGCTL);
+	BITSET(R2, 3); /* SRREQ enter self-refresh mode */
+	[P0] = R2;
+	SSYNC;
+1:
+	R2 = [P0];
+	CC = BITTST(R2, 4);
+	if !CC JUMP 1b;
+#else 				/* SDRAM */
 	P0.L = lo(EBIU_SDGCTL);
+	P0.H = hi(EBIU_SDGCTL);
 	R2 = [P0];
-	R3.H = hi(SRFS);
-	R3.L = lo(SRFS);
-#endif
-	R2 = R2|R3;
+	BITSET(R2, 24); /* SRFS enter self-refresh mode */
 	[P0] = R2;
-	ssync;
-#if defined(CONFIG_BF54x)
-.LSRR_MODE:
+	SSYNC;
+
+	P0.L = lo(EBIU_SDSTAT);
+	P0.H = hi(EBIU_SDSTAT);
+1:
+	R2 = w[P0];
+	SSYNC;
+	cc = BITTST(R2, 1); /* SDSRA poll self-refresh status */
+	if !cc jump 1b;
+
+	P0.L = lo(EBIU_SDGCTL);
+	P0.H = hi(EBIU_SDGCTL);
 	R2 = [P0];
-	CC = BITTST(R2, 4);
-	if !CC JUMP .LSRR_MODE;
+	BITCLR(R2, 0); /* SCTLE disable CLKOUT */
+	[P0] = R2;
 #endif
 	RTS;
+ENDPROC(_set_dram_srfs)
 
 ENTRY(_unset_dram_srfs)
 	/*  set the dram out of self refresh mode */
-#if defined(CONFIG_BF54x)
+#if defined(EBIU_RSTCTL)	/* DDR */
 	P0.H = hi(EBIU_RSTCTL);
 	P0.L = lo(EBIU_RSTCTL);
 	R2 = [P0];
-	R3.H = hi(SRREQ);
-	R3.L = lo(SRREQ);
-#else
+	BITCLR(R2, 3); /* clear SRREQ bit */
+	[P0] = R2;
+#elif defined(EBIU_SDGCTL)	/* SDRAM */
+
+	P0.L = lo(EBIU_SDGCTL); /* release CLKOUT from self-refresh */
+	P0.H = hi(EBIU_SDGCTL);
+	R2 = [P0];
+	BITSET(R2, 0); /* SCTLE enable CLKOUT */
+	[P0] = R2
+	SSYNC;
+
+	P0.L = lo(EBIU_SDGCTL); /* release SDRAM from self-refresh */
 	P0.H = hi(EBIU_SDGCTL);
-	P0.L = lo(EBIU_SDGCTL);
 	R2 = [P0];
-	R3.H = hi(SRFS);
-	R3.L = lo(SRFS);
+	BITCLR(R2, 24); /* clear SRFS bit */
+	[P0] = R2
 #endif
-	R3 = ~R3;
-	R2 = R2&R3;
-	[P0] = R2;
-	ssync;
+	SSYNC;
 	RTS;
+ENDPROC(_unset_dram_srfs)
 
 ENTRY(_set_sic_iwr)
 #if defined(CONFIG_BF54x) || defined(CONFIG_BF52x)  || defined(CONFIG_BF561)
@@ -300,6 +266,7 @@ ENTRY(_set_sic_iwr)
 
 	SSYNC;
 	RTS;
+ENDPROC(_set_sic_iwr)
 
 ENTRY(_set_rtc_istat)
 #ifndef CONFIG_BF561
@@ -307,8 +274,14 @@ ENTRY(_set_rtc_istat)
 	P0.L = lo(RTC_ISTAT);
 	w[P0] = R0.L;
 	SSYNC;
+#elif (ANOMALY_05000371)
+	nop;
+	nop;
+	nop;
+	nop;
 #endif
 	RTS;
+ENDPROC(_set_rtc_istat)
 
 ENTRY(_test_pll_locked)
 	P0.H = hi(PLL_STAT);
@@ -318,3 +291,509 @@ ENTRY(_test_pll_locked)
 	CC = BITTST(R0,5);
 	IF !CC JUMP 1b;
 	RTS;
+ENDPROC(_test_pll_locked)
+
+.section .text
+
+ENTRY(_do_hibernate)
+	[--SP] = ( R7:0, P5:0 );
+	[--SP] =  RETS;
+	/* Save System MMRs */
+	R2 = R0;
+	P0.H = hi(PLL_CTL);
+	P0.L = lo(PLL_CTL);
+
+#ifdef SIC_IMASK0
+	PM_SYS_PUSH(SIC_IMASK0)
+#endif
+#ifdef SIC_IMASK1
+	PM_SYS_PUSH(SIC_IMASK1)
+#endif
+#ifdef SIC_IMASK2
+	PM_SYS_PUSH(SIC_IMASK2)
+#endif
+#ifdef SIC_IMASK
+	PM_SYS_PUSH(SIC_IMASK)
+#endif
+#ifdef SICA_IMASK0
+	PM_SYS_PUSH(SICA_IMASK0)
+#endif
+#ifdef SICA_IMASK1
+	PM_SYS_PUSH(SICA_IMASK1)
+#endif
+#ifdef SIC_IAR2
+	PM_SYS_PUSH(SIC_IAR0)
+	PM_SYS_PUSH(SIC_IAR1)
+	PM_SYS_PUSH(SIC_IAR2)
+#endif
+#ifdef SIC_IAR3
+	PM_SYS_PUSH(SIC_IAR3)
+#endif
+#ifdef SIC_IAR4
+	PM_SYS_PUSH(SIC_IAR4)
+	PM_SYS_PUSH(SIC_IAR5)
+	PM_SYS_PUSH(SIC_IAR6)
+#endif
+#ifdef SIC_IAR7
+	PM_SYS_PUSH(SIC_IAR7)
+#endif
+#ifdef SIC_IAR8
+	PM_SYS_PUSH(SIC_IAR8)
+	PM_SYS_PUSH(SIC_IAR9)
+	PM_SYS_PUSH(SIC_IAR10)
+	PM_SYS_PUSH(SIC_IAR11)
+#endif
+
+#ifdef SICA_IAR0
+	PM_SYS_PUSH(SICA_IAR0)
+	PM_SYS_PUSH(SICA_IAR1)
+	PM_SYS_PUSH(SICA_IAR2)
+	PM_SYS_PUSH(SICA_IAR3)
+	PM_SYS_PUSH(SICA_IAR4)
+	PM_SYS_PUSH(SICA_IAR5)
+	PM_SYS_PUSH(SICA_IAR6)
+	PM_SYS_PUSH(SICA_IAR7)
+#endif
+
+#ifdef SIC_IWR
+	PM_SYS_PUSH(SIC_IWR)
+#endif
+#ifdef SIC_IWR0
+	PM_SYS_PUSH(SIC_IWR0)
+#endif
+#ifdef SIC_IWR1
+	PM_SYS_PUSH(SIC_IWR1)
+#endif
+#ifdef SIC_IWR2
+	PM_SYS_PUSH(SIC_IWR2)
+#endif
+#ifdef SICA_IWR0
+	PM_SYS_PUSH(SICA_IWR0)
+#endif
+#ifdef SICA_IWR1
+	PM_SYS_PUSH(SICA_IWR1)
+#endif
+
+#ifdef PINT0_ASSIGN
+	PM_SYS_PUSH(PINT0_ASSIGN)
+	PM_SYS_PUSH(PINT1_ASSIGN)
+	PM_SYS_PUSH(PINT2_ASSIGN)
+	PM_SYS_PUSH(PINT3_ASSIGN)
+#endif
+
+	PM_SYS_PUSH(EBIU_AMBCTL0)
+	PM_SYS_PUSH(EBIU_AMBCTL1)
+	PM_SYS_PUSH16(EBIU_AMGCTL)
+
+#ifdef EBIU_FCTL
+	PM_SYS_PUSH(EBIU_MBSCTL)
+	PM_SYS_PUSH(EBIU_MODE)
+	PM_SYS_PUSH(EBIU_FCTL)
+#endif
+
+	PM_SYS_PUSH16(SYSCR)
+
+	/* Save Core MMRs */
+	P0.H = hi(SRAM_BASE_ADDRESS);
+	P0.L = lo(SRAM_BASE_ADDRESS);
+
+	PM_PUSH(DMEM_CONTROL)
+	PM_PUSH(DCPLB_ADDR0)
+	PM_PUSH(DCPLB_ADDR1)
+	PM_PUSH(DCPLB_ADDR2)
+	PM_PUSH(DCPLB_ADDR3)
+	PM_PUSH(DCPLB_ADDR4)
+	PM_PUSH(DCPLB_ADDR5)
+	PM_PUSH(DCPLB_ADDR6)
+	PM_PUSH(DCPLB_ADDR7)
+	PM_PUSH(DCPLB_ADDR8)
+	PM_PUSH(DCPLB_ADDR9)
+	PM_PUSH(DCPLB_ADDR10)
+	PM_PUSH(DCPLB_ADDR11)
+	PM_PUSH(DCPLB_ADDR12)
+	PM_PUSH(DCPLB_ADDR13)
+	PM_PUSH(DCPLB_ADDR14)
+	PM_PUSH(DCPLB_ADDR15)
+	PM_PUSH(DCPLB_DATA0)
+	PM_PUSH(DCPLB_DATA1)
+	PM_PUSH(DCPLB_DATA2)
+	PM_PUSH(DCPLB_DATA3)
+	PM_PUSH(DCPLB_DATA4)
+	PM_PUSH(DCPLB_DATA5)
+	PM_PUSH(DCPLB_DATA6)
+	PM_PUSH(DCPLB_DATA7)
+	PM_PUSH(DCPLB_DATA8)
+	PM_PUSH(DCPLB_DATA9)
+	PM_PUSH(DCPLB_DATA10)
+	PM_PUSH(DCPLB_DATA11)
+	PM_PUSH(DCPLB_DATA12)
+	PM_PUSH(DCPLB_DATA13)
+	PM_PUSH(DCPLB_DATA14)
+	PM_PUSH(DCPLB_DATA15)
+	PM_PUSH(IMEM_CONTROL)
+	PM_PUSH(ICPLB_ADDR0)
+	PM_PUSH(ICPLB_ADDR1)
+	PM_PUSH(ICPLB_ADDR2)
+	PM_PUSH(ICPLB_ADDR3)
+	PM_PUSH(ICPLB_ADDR4)
+	PM_PUSH(ICPLB_ADDR5)
+	PM_PUSH(ICPLB_ADDR6)
+	PM_PUSH(ICPLB_ADDR7)
+	PM_PUSH(ICPLB_ADDR8)
+	PM_PUSH(ICPLB_ADDR9)
+	PM_PUSH(ICPLB_ADDR10)
+	PM_PUSH(ICPLB_ADDR11)
+	PM_PUSH(ICPLB_ADDR12)
+	PM_PUSH(ICPLB_ADDR13)
+	PM_PUSH(ICPLB_ADDR14)
+	PM_PUSH(ICPLB_ADDR15)
+	PM_PUSH(ICPLB_DATA0)
+	PM_PUSH(ICPLB_DATA1)
+	PM_PUSH(ICPLB_DATA2)
+	PM_PUSH(ICPLB_DATA3)
+	PM_PUSH(ICPLB_DATA4)
+	PM_PUSH(ICPLB_DATA5)
+	PM_PUSH(ICPLB_DATA6)
+	PM_PUSH(ICPLB_DATA7)
+	PM_PUSH(ICPLB_DATA8)
+	PM_PUSH(ICPLB_DATA9)
+	PM_PUSH(ICPLB_DATA10)
+	PM_PUSH(ICPLB_DATA11)
+	PM_PUSH(ICPLB_DATA12)
+	PM_PUSH(ICPLB_DATA13)
+	PM_PUSH(ICPLB_DATA14)
+	PM_PUSH(ICPLB_DATA15)
+	PM_PUSH(EVT0)
+	PM_PUSH(EVT1)
+	PM_PUSH(EVT2)
+	PM_PUSH(EVT3)
+	PM_PUSH(EVT4)
+	PM_PUSH(EVT5)
+	PM_PUSH(EVT6)
+	PM_PUSH(EVT7)
+	PM_PUSH(EVT8)
+	PM_PUSH(EVT9)
+	PM_PUSH(EVT10)
+	PM_PUSH(EVT11)
+	PM_PUSH(EVT12)
+	PM_PUSH(EVT13)
+	PM_PUSH(EVT14)
+	PM_PUSH(EVT15)
+	PM_PUSH(IMASK)
+	PM_PUSH(ILAT)
+	PM_PUSH(IPRIO)
+	PM_PUSH(TCNTL)
+	PM_PUSH(TPERIOD)
+	PM_PUSH(TSCALE)
+	PM_PUSH(TCOUNT)
+	PM_PUSH(TBUFCTL)
+
+	/* Save Core Registers */
+	[--sp] = SYSCFG;
+	[--sp] = ( R7:0, P5:0 );
+	[--sp] = fp;
+	[--sp] = usp;
+
+	[--sp] = i0;
+	[--sp] = i1;
+	[--sp] = i2;
+	[--sp] = i3;
+
+	[--sp] = m0;
+	[--sp] = m1;
+	[--sp] = m2;
+	[--sp] = m3;
+
+	[--sp] = l0;
+	[--sp] = l1;
+	[--sp] = l2;
+	[--sp] = l3;
+
+	[--sp] = b0;
+	[--sp] = b1;
+	[--sp] = b2;
+	[--sp] = b3;
+	[--sp] = a0.x;
+	[--sp] = a0.w;
+	[--sp] = a1.x;
+	[--sp] = a1.w;
+
+	[--sp] = LC0;
+	[--sp] = LC1;
+	[--sp] = LT0;
+	[--sp] = LT1;
+	[--sp] = LB0;
+	[--sp] = LB1;
+
+	[--sp] = ASTAT;
+	[--sp] = CYCLES;
+	[--sp] = CYCLES2;
+
+	[--sp] = RETS;
+	r0 = RETI;
+	[--sp] = r0;
+	[--sp] = RETX;
+	[--sp] = RETN;
+	[--sp] = RETE;
+	[--sp] = SEQSTAT;
+
+	/* Save Magic, return address and Stack Pointer */
+	P0.H = 0;
+	P0.L = 0;
+	R0.H = 0xDEAD;	/* Hibernate Magic */
+	R0.L = 0xBEEF;
+	[P0++] = R0;	/* Store Hibernate Magic */
+	R0.H = .Lpm_resume_here;
+	R0.L = .Lpm_resume_here;
+	[P0++] = R0;	/* Save Return Address */
+	[P0++] = SP;	/* Save Stack Pointer */
+	P0.H = _hibernate_mode;
+	P0.L = _hibernate_mode;
+	R0 = R2;
+	call (P0); /* Goodbye */
+
+.Lpm_resume_here:
+
+	/* Restore Core Registers */
+	SEQSTAT = [sp++];
+	RETE = [sp++];
+	RETN = [sp++];
+	RETX = [sp++];
+	r0 = [sp++];
+	RETI = r0;
+	RETS = [sp++];
+
+	CYCLES2 = [sp++];
+	CYCLES = [sp++];
+	ASTAT = [sp++];
+
+	LB1 = [sp++];
+	LB0 = [sp++];
+	LT1 = [sp++];
+	LT0 = [sp++];
+	LC1 = [sp++];
+	LC0 = [sp++];
+
+	a1.w = [sp++];
+	a1.x = [sp++];
+	a0.w = [sp++];
+	a0.x = [sp++];
+	b3 = [sp++];
+	b2 = [sp++];
+	b1 = [sp++];
+	b0 = [sp++];
+
+	l3 = [sp++];
+	l2 = [sp++];
+	l1 = [sp++];
+	l0 = [sp++];
+
+	m3 = [sp++];
+	m2 = [sp++];
+	m1 = [sp++];
+	m0 = [sp++];
+
+	i3 = [sp++];
+	i2 = [sp++];
+	i1 = [sp++];
+	i0 = [sp++];
+
+	usp = [sp++];
+	fp = [sp++];
+
+	( R7 : 0, P5 : 0) = [ SP ++ ];
+	SYSCFG = [sp++];
+
+	/* Restore Core MMRs */
+
+	PM_POP(TBUFCTL)
+	PM_POP(TCOUNT)
+	PM_POP(TSCALE)
+	PM_POP(TPERIOD)
+	PM_POP(TCNTL)
+	PM_POP(IPRIO)
+	PM_POP(ILAT)
+	PM_POP(IMASK)
+	PM_POP(EVT15)
+	PM_POP(EVT14)
+	PM_POP(EVT13)
+	PM_POP(EVT12)
+	PM_POP(EVT11)
+	PM_POP(EVT10)
+	PM_POP(EVT9)
+	PM_POP(EVT8)
+	PM_POP(EVT7)
+	PM_POP(EVT6)
+	PM_POP(EVT5)
+	PM_POP(EVT4)
+	PM_POP(EVT3)
+	PM_POP(EVT2)
+	PM_POP(EVT1)
+	PM_POP(EVT0)
+	PM_POP(ICPLB_DATA15)
+	PM_POP(ICPLB_DATA14)
+	PM_POP(ICPLB_DATA13)
+	PM_POP(ICPLB_DATA12)
+	PM_POP(ICPLB_DATA11)
+	PM_POP(ICPLB_DATA10)
+	PM_POP(ICPLB_DATA9)
+	PM_POP(ICPLB_DATA8)
+	PM_POP(ICPLB_DATA7)
+	PM_POP(ICPLB_DATA6)
+	PM_POP(ICPLB_DATA5)
+	PM_POP(ICPLB_DATA4)
+	PM_POP(ICPLB_DATA3)
+	PM_POP(ICPLB_DATA2)
+	PM_POP(ICPLB_DATA1)
+	PM_POP(ICPLB_DATA0)
+	PM_POP(ICPLB_ADDR15)
+	PM_POP(ICPLB_ADDR14)
+	PM_POP(ICPLB_ADDR13)
+	PM_POP(ICPLB_ADDR12)
+	PM_POP(ICPLB_ADDR11)
+	PM_POP(ICPLB_ADDR10)
+	PM_POP(ICPLB_ADDR9)
+	PM_POP(ICPLB_ADDR8)
+	PM_POP(ICPLB_ADDR7)
+	PM_POP(ICPLB_ADDR6)
+	PM_POP(ICPLB_ADDR5)
+	PM_POP(ICPLB_ADDR4)
+	PM_POP(ICPLB_ADDR3)
+	PM_POP(ICPLB_ADDR2)
+	PM_POP(ICPLB_ADDR1)
+	PM_POP(ICPLB_ADDR0)
+	PM_POP(IMEM_CONTROL)
+	PM_POP(DCPLB_DATA15)
+	PM_POP(DCPLB_DATA14)
+	PM_POP(DCPLB_DATA13)
+	PM_POP(DCPLB_DATA12)
+	PM_POP(DCPLB_DATA11)
+	PM_POP(DCPLB_DATA10)
+	PM_POP(DCPLB_DATA9)
+	PM_POP(DCPLB_DATA8)
+	PM_POP(DCPLB_DATA7)
+	PM_POP(DCPLB_DATA6)
+	PM_POP(DCPLB_DATA5)
+	PM_POP(DCPLB_DATA4)
+	PM_POP(DCPLB_DATA3)
+	PM_POP(DCPLB_DATA2)
+	PM_POP(DCPLB_DATA1)
+	PM_POP(DCPLB_DATA0)
+	PM_POP(DCPLB_ADDR15)
+	PM_POP(DCPLB_ADDR14)
+	PM_POP(DCPLB_ADDR13)
+	PM_POP(DCPLB_ADDR12)
+	PM_POP(DCPLB_ADDR11)
+	PM_POP(DCPLB_ADDR10)
+	PM_POP(DCPLB_ADDR9)
+	PM_POP(DCPLB_ADDR8)
+	PM_POP(DCPLB_ADDR7)
+	PM_POP(DCPLB_ADDR6)
+	PM_POP(DCPLB_ADDR5)
+	PM_POP(DCPLB_ADDR4)
+	PM_POP(DCPLB_ADDR3)
+	PM_POP(DCPLB_ADDR2)
+	PM_POP(DCPLB_ADDR1)
+	PM_POP(DCPLB_ADDR0)
+	PM_POP(DMEM_CONTROL)
+
+	/* Restore System MMRs */
+
+	P0.H = hi(PLL_CTL);
+	P0.L = lo(PLL_CTL);
+	PM_SYS_POP16(SYSCR)
+
+#ifdef EBIU_FCTL
+	PM_SYS_POP(EBIU_FCTL)
+	PM_SYS_POP(EBIU_MODE)
+	PM_SYS_POP(EBIU_MBSCTL)
+#endif
+	PM_SYS_POP16(EBIU_AMGCTL)
+	PM_SYS_POP(EBIU_AMBCTL1)
+	PM_SYS_POP(EBIU_AMBCTL0)
+
+#ifdef PINT0_ASSIGN
+	PM_SYS_POP(PINT3_ASSIGN)
+	PM_SYS_POP(PINT2_ASSIGN)
+	PM_SYS_POP(PINT1_ASSIGN)
+	PM_SYS_POP(PINT0_ASSIGN)
+#endif
+
+#ifdef SICA_IWR1
+	PM_SYS_POP(SICA_IWR1)
+#endif
+#ifdef SICA_IWR0
+	PM_SYS_POP(SICA_IWR0)
+#endif
+#ifdef SIC_IWR2
+	PM_SYS_POP(SIC_IWR2)
+#endif
+#ifdef SIC_IWR1
+	PM_SYS_POP(SIC_IWR1)
+#endif
+#ifdef SIC_IWR0
+	PM_SYS_POP(SIC_IWR0)
+#endif
+#ifdef SIC_IWR
+	PM_SYS_POP(SIC_IWR)
+#endif
+
+#ifdef SICA_IAR0
+	PM_SYS_POP(SICA_IAR7)
+	PM_SYS_POP(SICA_IAR6)
+	PM_SYS_POP(SICA_IAR5)
+	PM_SYS_POP(SICA_IAR4)
+	PM_SYS_POP(SICA_IAR3)
+	PM_SYS_POP(SICA_IAR2)
+	PM_SYS_POP(SICA_IAR1)
+	PM_SYS_POP(SICA_IAR0)
+#endif
+
+#ifdef SIC_IAR8
+	PM_SYS_POP(SIC_IAR11)
+	PM_SYS_POP(SIC_IAR10)
+	PM_SYS_POP(SIC_IAR9)
+	PM_SYS_POP(SIC_IAR8)
+#endif
+#ifdef SIC_IAR7
+	PM_SYS_POP(SIC_IAR7)
+#endif
+#ifdef SIC_IAR6
+	PM_SYS_POP(SIC_IAR6)
+	PM_SYS_POP(SIC_IAR5)
+	PM_SYS_POP(SIC_IAR4)
+#endif
+#ifdef SIC_IAR3
+	PM_SYS_POP(SIC_IAR3)
+#endif
+#ifdef SIC_IAR2
+	PM_SYS_POP(SIC_IAR2)
+	PM_SYS_POP(SIC_IAR1)
+	PM_SYS_POP(SIC_IAR0)
+#endif
+#ifdef SICA_IMASK1
+	PM_SYS_POP(SICA_IMASK1)
+#endif
+#ifdef SICA_IMASK0
+	PM_SYS_POP(SICA_IMASK0)
+#endif
+#ifdef SIC_IMASK
+	PM_SYS_POP(SIC_IMASK)
+#endif
+#ifdef SIC_IMASK2
+	PM_SYS_POP(SIC_IMASK2)
+#endif
+#ifdef SIC_IMASK1
+	PM_SYS_POP(SIC_IMASK1)
+#endif
+#ifdef SIC_IMASK0
+	PM_SYS_POP(SIC_IMASK0)
+#endif
+
+	[--sp] = RETI;	/* Clear Global Interrupt Disable */
+	SP += 4;
+
+	RETS = [SP++];
+	( R7:0, P5:0 ) = [SP++];
+	RTS;
+ENDPROC(_do_hibernate)
diff --git a/arch/blackfin/mach-common/entry.S b/arch/blackfin/mach-common/entry.S
index 038f70e0be65..847c172a99eb 100644
--- a/arch/blackfin/mach-common/entry.S
+++ b/arch/blackfin/mach-common/entry.S
@@ -43,7 +43,7 @@
 #include <asm/asm-offsets.h>
 #include <asm/trace.h>
 
-#include <asm/mach-common/context.S>
+#include <asm/context.S>
 
 #if defined(CONFIG_BFIN_SCRATCH_REG_RETN)
 # define EX_SCRATCH_REG RETN
@@ -158,6 +158,39 @@ ENTRY(_ex_single_step)
 	cc = r7 == r6;
 	if cc jump _bfin_return_from_exception;
 
+#ifdef CONFIG_KGDB
+	/* Don't do single step in hardware exception handler */
+        p5.l = lo(IPEND);
+        p5.h = hi(IPEND);
+	r6 = [p5];
+	cc = bittst(r6, 4);
+	if cc jump _bfin_return_from_exception;
+	cc = bittst(r6, 5);
+	if cc jump _bfin_return_from_exception;
+
+	/* skip single step if current interrupt priority is higher than
+	 * that of the first instruction, from which gdb starts single step */
+	r6 >>= 6;
+	r7 = 10;
+.Lfind_priority_start:
+	cc = bittst(r6, 0);
+	if cc jump .Lfind_priority_done;
+	r6 >>= 1;
+	r7 += -1;
+	cc = r7 == 0;
+	if cc jump .Lfind_priority_done;
+	jump.s .Lfind_priority_start;
+.Lfind_priority_done:
+	p4.l = _debugger_step;
+	p4.h = _debugger_step;
+	r6 = [p4];
+	cc = r6 == 0;
+	if cc jump .Ldo_single_step;
+	r6 += -1;
+	cc = r6 < r7;
+	if cc jump 1f;
+.Ldo_single_step:
+#else
 	/* If we were in user mode, do the single step normally.  */
 	p5.l = lo(IPEND);
 	p5.h = hi(IPEND);
@@ -166,6 +199,7 @@ ENTRY(_ex_single_step)
 	r7 = r7 & r6;
 	cc = r7 == 0;
 	if !cc jump 1f;
+#endif
 
 	/* Single stepping only a single instruction, so clear the trace
 	 * bit here.  */
@@ -1388,6 +1422,12 @@ ENTRY(_sys_call_table)
 	.long _sys_semtimedop
 	.long _sys_timerfd_settime
 	.long _sys_timerfd_gettime
+	.long _sys_signalfd4		/* 360 */
+	.long _sys_eventfd2
+	.long _sys_epoll_create1
+	.long _sys_dup3
+	.long _sys_pipe2
+	.long _sys_inotify_init1	/* 365 */
 
 	.rept NR_syscalls-(.-_sys_call_table)/4
 	.long _sys_ni_syscall
diff --git a/arch/blackfin/mach-common/head.S b/arch/blackfin/mach-common/head.S
new file mode 100644
index 000000000000..191b4e974c4b
--- /dev/null
+++ b/arch/blackfin/mach-common/head.S
@@ -0,0 +1,207 @@
+/*
+ * Common Blackfin startup code
+ *
+ * Copyright 2004-2008 Analog Devices Inc.
+ *
+ * Enter bugs at http://blackfin.uclinux.org/
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#include <linux/linkage.h>
+#include <linux/init.h>
+#include <asm/blackfin.h>
+#include <asm/thread_info.h>
+#include <asm/trace.h>
+
+__INIT
+
+#define INITIAL_STACK	(L1_SCRATCH_START + L1_SCRATCH_LENGTH - 12)
+
+ENTRY(__start)
+	/* R0: argument of command line string, passed from uboot, save it */
+	R7 = R0;
+	/* Enable Cycle Counter and Nesting Of Interrupts */
+#ifdef CONFIG_BFIN_SCRATCH_REG_CYCLES
+	R0 = SYSCFG_SNEN;
+#else
+	R0 = SYSCFG_SNEN | SYSCFG_CCEN;
+#endif
+	SYSCFG = R0;
+	R0 = 0;
+
+	/* Clear Out All the data and pointer Registers */
+	R1 = R0;
+	R2 = R0;
+	R3 = R0;
+	R4 = R0;
+	R5 = R0;
+	R6 = R0;
+
+	P0 = R0;
+	P1 = R0;
+	P2 = R0;
+	P3 = R0;
+	P4 = R0;
+	P5 = R0;
+
+	LC0 = r0;
+	LC1 = r0;
+	L0 = r0;
+	L1 = r0;
+	L2 = r0;
+	L3 = r0;
+
+	/* Clear Out All the DAG Registers */
+	B0 = r0;
+	B1 = r0;
+	B2 = r0;
+	B3 = r0;
+
+	I0 = r0;
+	I1 = r0;
+	I2 = r0;
+	I3 = r0;
+
+	M0 = r0;
+	M1 = r0;
+	M2 = r0;
+	M3 = r0;
+
+	trace_buffer_init(p0,r0);
+	P0 = R1;
+	R0 = R1;
+
+	/* Turn off the icache */
+	p0.l = LO(IMEM_CONTROL);
+	p0.h = HI(IMEM_CONTROL);
+	R1 = [p0];
+	R0 = ~ENICPLB;
+	R0 = R0 & R1;
+	[p0] = R0;
+	SSYNC;
+
+	/* Turn off the dcache */
+	p0.l = LO(DMEM_CONTROL);
+	p0.h = HI(DMEM_CONTROL);
+	R1 = [p0];
+	R0 = ~ENDCPLB;
+	R0 = R0 & R1;
+	[p0] = R0;
+	SSYNC;
+
+	/* Save RETX, in case of doublefault */
+	p0.l = ___retx;
+	p0.h = ___retx;
+	R0 = RETX;
+	[P0] = R0;
+
+	/* Initialize stack pointer */
+	sp.l = lo(INITIAL_STACK);
+	sp.h = hi(INITIAL_STACK);
+	fp = sp;
+	usp = sp;
+
+#ifdef CONFIG_EARLY_PRINTK
+	call _init_early_exception_vectors;
+#endif
+
+	/* Put The Code for PLL Programming and SDRAM Programming in L1 ISRAM */
+	call _bf53x_relocate_l1_mem;
+#ifdef CONFIG_BFIN_KERNEL_CLOCK
+	call _start_dma_code;
+#endif
+
+	/* This section keeps the processor in supervisor mode
+	 * during kernel boot.  Switches to user mode at end of boot.
+	 * See page 3-9 of Hardware Reference manual for documentation.
+	 */
+
+	/* EVT15 = _real_start */
+
+	p0.l = lo(EVT15);
+	p0.h = hi(EVT15);
+	p1.l = _real_start;
+	p1.h = _real_start;
+	[p0] = p1;
+	csync;
+
+	p0.l = lo(IMASK);
+	p0.h = hi(IMASK);
+	p1.l = IMASK_IVG15;
+	p1.h = 0x0;
+	[p0] = p1;
+	csync;
+
+	raise 15;
+	p0.l = .LWAIT_HERE;
+	p0.h = .LWAIT_HERE;
+	reti = p0;
+#if ANOMALY_05000281
+	nop; nop; nop;
+#endif
+	rti;
+
+.LWAIT_HERE:
+	jump .LWAIT_HERE;
+ENDPROC(__start)
+
+/* A little BF561 glue ... */
+#ifndef WDOG_CTL
+# define WDOG_CTL WDOGA_CTL
+#endif
+
+ENTRY(_real_start)
+	/* Enable nested interrupts */
+	[--sp] = reti;
+
+	/* watchdog off for now */
+	p0.l = lo(WDOG_CTL);
+	p0.h = hi(WDOG_CTL);
+	r0 = 0xAD6(z);
+	w[p0] = r0;
+	ssync;
+
+	/* Zero out the bss region
+	 * Note: this will fail if bss is 0 bytes ...
+	 */
+	r0 = 0 (z);
+	r1.l = ___bss_start;
+	r1.h = ___bss_start;
+	r2.l = ___bss_stop;
+	r2.h = ___bss_stop;
+	r2 = r2 - r1;
+	r2 >>= 2;
+	p1 = r1;
+	p2 = r2;
+	lsetup (.L_clear_bss, .L_clear_bss) lc0 = p2;
+.L_clear_bss:
+	[p1++] = r0;
+
+	/* In case there is a NULL pointer reference,
+	 * zero out region before stext
+	 */
+	p1 = r0;
+	r2.l = __stext;
+	r2.h = __stext;
+	r2 >>= 2;
+	p2 = r2;
+	lsetup (.L_clear_zero, .L_clear_zero) lc0 = p2;
+.L_clear_zero:
+	[p1++] = r0;
+
+	/* Pass the u-boot arguments to the global value command line */
+	R0 = R7;
+	call _cmdline_init;
+
+	/* Load the current thread pointer and stack */
+	sp.l = _init_thread_union;
+	sp.h = _init_thread_union;
+	p1 = THREAD_SIZE (z);
+	sp = sp + p1;
+	usp = sp;
+	fp = sp;
+	jump.l _start_kernel;
+ENDPROC(_real_start)
+
+__FINIT
diff --git a/arch/blackfin/mach-common/interrupt.S b/arch/blackfin/mach-common/interrupt.S
index 7f752c87fe46..b27e59d32401 100644
--- a/arch/blackfin/mach-common/interrupt.S
+++ b/arch/blackfin/mach-common/interrupt.S
@@ -29,7 +29,7 @@
  */
 
 #include <asm/blackfin.h>
-#include <asm/mach/irq.h>
+#include <mach/irq.h>
 #include <linux/linkage.h>
 #include <asm/entry.h>
 #include <asm/asm-offsets.h>
@@ -37,7 +37,7 @@
 #include <asm/traps.h>
 #include <asm/thread_info.h>
 
-#include <asm/mach-common/context.S>
+#include <asm/context.S>
 
 .extern _ret_from_exception
 
diff --git a/arch/blackfin/mach-common/ints-priority.c b/arch/blackfin/mach-common/ints-priority.c
index f5fd768022ea..5fa536727c61 100644
--- a/arch/blackfin/mach-common/ints-priority.c
+++ b/arch/blackfin/mach-common/ints-priority.c
@@ -71,6 +71,7 @@ atomic_t num_spurious;
 
 #ifdef CONFIG_PM
 unsigned long bfin_sic_iwr[3];	/* Up to 3 SIC_IWRx registers */
+unsigned vr_wakeup;
 #endif
 
 struct ivgx {
@@ -184,17 +185,56 @@ static void bfin_internal_unmask_irq(unsigned int irq)
 #ifdef CONFIG_PM
 int bfin_internal_set_wake(unsigned int irq, unsigned int state)
 {
-	unsigned bank, bit;
+	unsigned bank, bit, wakeup = 0;
 	unsigned long flags;
 	bank = SIC_SYSIRQ(irq) / 32;
 	bit = SIC_SYSIRQ(irq) % 32;
 
+	switch (irq) {
+#ifdef IRQ_RTC
+	case IRQ_RTC:
+	wakeup |= WAKE;
+	break;
+#endif
+#ifdef IRQ_CAN0_RX
+	case IRQ_CAN0_RX:
+	wakeup |= CANWE;
+	break;
+#endif
+#ifdef IRQ_CAN1_RX
+	case IRQ_CAN1_RX:
+	wakeup |= CANWE;
+	break;
+#endif
+#ifdef IRQ_USB_INT0
+	case IRQ_USB_INT0:
+	wakeup |= USBWE;
+	break;
+#endif
+#ifdef IRQ_KEY
+	case IRQ_KEY:
+	wakeup |= KPADWE;
+	break;
+#endif
+#ifdef CONFIG_BF54x
+	case IRQ_CNT:
+	wakeup |= ROTWE;
+	break;
+#endif
+	default:
+	break;
+	}
+
 	local_irq_save(flags);
 
-	if (state)
+	if (state) {
 		bfin_sic_iwr[bank] |= (1 << bit);
-	else
+		vr_wakeup  |= wakeup;
+
+	} else {
 		bfin_sic_iwr[bank] &= ~(1 << bit);
+		vr_wakeup  &= ~wakeup;
+	}
 
 	local_irq_restore(flags);
 
@@ -459,6 +499,8 @@ static struct irq_chip bfin_gpio_irqchip = {
 	.mask = bfin_gpio_mask_irq,
 	.mask_ack = bfin_gpio_mask_ack_irq,
 	.unmask = bfin_gpio_unmask_irq,
+	.disable = bfin_gpio_mask_irq,
+	.enable = bfin_gpio_unmask_irq,
 	.set_type = bfin_gpio_irq_type,
 	.startup = bfin_gpio_irq_startup,
 	.shutdown = bfin_gpio_irq_shutdown,
@@ -846,6 +888,8 @@ static struct irq_chip bfin_gpio_irqchip = {
 	.mask = bfin_gpio_mask_irq,
 	.mask_ack = bfin_gpio_mask_ack_irq,
 	.unmask = bfin_gpio_unmask_irq,
+	.disable = bfin_gpio_mask_irq,
+	.enable = bfin_gpio_unmask_irq,
 	.set_type = bfin_gpio_irq_type,
 	.startup = bfin_gpio_irq_startup,
 	.shutdown = bfin_gpio_irq_shutdown,
@@ -939,6 +983,11 @@ int __init init_arch_irq(void)
 
 	local_irq_disable();
 
+#if (defined(CONFIG_BF537) || defined(CONFIG_BF536))
+	/* Clear EMAC Interrupt Status bits so we can demux it later */
+	bfin_write_EMAC_SYSTAT(-1);
+#endif
+
 #ifdef CONFIG_BF54x
 # ifdef CONFIG_PINTx_REASSIGN
 	pint[0]->assign = CONFIG_PINT0_ASSIGN;
@@ -1024,13 +1073,22 @@ int __init init_arch_irq(void)
 	    IMASK_IVG10 | IMASK_IVG9 | IMASK_IVG8 | IMASK_IVG7 | IMASK_IVGHW;
 
 #if defined(CONFIG_BF54x) || defined(CONFIG_BF52x) || defined(CONFIG_BF561)
-	bfin_write_SIC_IWR0(IWR_ENABLE_ALL);
-	bfin_write_SIC_IWR1(IWR_ENABLE_ALL);
+	bfin_write_SIC_IWR0(IWR_DISABLE_ALL);
+#if defined(CONFIG_BF52x)
+	/* BF52x system reset does not properly reset SIC_IWR1 which
+	 * will screw up the bootrom as it relies on MDMA0/1 waking it
+	 * up from IDLE instructions.  See this report for more info:
+	 * http://blackfin.uclinux.org/gf/tracker/4323
+	 */
+	bfin_write_SIC_IWR1(IWR_ENABLE(10) | IWR_ENABLE(11));
+#else
+	bfin_write_SIC_IWR1(IWR_DISABLE_ALL);
+#endif
 # ifdef CONFIG_BF54x
-	bfin_write_SIC_IWR2(IWR_ENABLE_ALL);
+	bfin_write_SIC_IWR2(IWR_DISABLE_ALL);
 # endif
 #else
-	bfin_write_SIC_IWR(IWR_ENABLE_ALL);
+	bfin_write_SIC_IWR(IWR_DISABLE_ALL);
 #endif
 
 	return 0;
diff --git a/arch/blackfin/mach-common/lock.S b/arch/blackfin/mach-common/lock.S
index 30b887e67dd6..9daf01201e9f 100644
--- a/arch/blackfin/mach-common/lock.S
+++ b/arch/blackfin/mach-common/lock.S
@@ -28,13 +28,10 @@
  */
 
 #include <linux/linkage.h>
-#include <asm/cplb.h>
 #include <asm/blackfin.h>
 
 .text
 
-#ifdef CONFIG_BFIN_ICACHE_LOCK
-
 /* When you come here, it is assumed that
  * R0 - Which way to be locked
  */
@@ -189,18 +186,38 @@ ENTRY(_cache_lock)
 	RTS;
 ENDPROC(_cache_lock)
 
-#endif	/* BFIN_ICACHE_LOCK */
-
-/* Return the ILOC bits of IMEM_CONTROL
+/* Invalidate the Entire Instruction cache by
+ * disabling IMC bit
  */
+ENTRY(_invalidate_entire_icache)
+	[--SP] = ( R7:5);
 
-ENTRY(_read_iloc)
-	P1.H = HI(IMEM_CONTROL);
-	P1.L = LO(IMEM_CONTROL);
-	R1 = 0xF;
-	R0 = [P1];
-	R0 = R0 >> 3;
-	R0 = R0 & R1;
+	P0.L = LO(IMEM_CONTROL);
+	P0.H = HI(IMEM_CONTROL);
+	R7 = [P0];
+
+	/* Clear the IMC bit , All valid bits in the instruction
+	 * cache are set to the invalid state
+	 */
+	BITCLR(R7,IMC_P);
+	CLI R6;
+	SSYNC;		/* SSYNC required before invalidating cache. */
+	.align 8;
+	[P0] = R7;
+	SSYNC;
+	STI R6;
+
+	/* Configures the instruction cache agian */
+	R6 = (IMC | ENICPLB);
+	R7 = R7 | R6;
+
+	CLI R6;
+	SSYNC;		/* SSYNC required before writing to IMEM_CONTROL. */
+	.align 8;
+	[P0] = R7;
+	SSYNC;
+	STI R6;
 
+	( R7:5) = [SP++];
 	RTS;
-ENDPROC(_read_iloc)
+ENDPROC(_invalidate_entire_icache)
diff --git a/arch/blackfin/mach-common/pm.c b/arch/blackfin/mach-common/pm.c
index 0be805ca423f..e28c6af1f415 100644
--- a/arch/blackfin/mach-common/pm.c
+++ b/arch/blackfin/mach-common/pm.c
@@ -38,8 +38,9 @@
 #include <linux/io.h>
 #include <linux/irq.h>
 
-#include <asm/dpmc.h>
 #include <asm/gpio.h>
+#include <asm/dma.h>
+#include <asm/dpmc.h>
 
 #ifdef CONFIG_PM_WAKEUP_GPIO_POLAR_H
 #define WAKEUP_TYPE	PM_WAKE_HIGH
@@ -61,16 +62,17 @@
 #define WAKEUP_TYPE	PM_WAKE_BOTH_EDGES
 #endif
 
+
 void bfin_pm_suspend_standby_enter(void)
 {
+	unsigned long flags;
+
 #ifdef CONFIG_PM_WAKEUP_BY_GPIO
 	gpio_pm_wakeup_request(CONFIG_PM_WAKEUP_GPIO_NUMBER, WAKEUP_TYPE);
 #endif
 
-	u32 flags;
-
 	local_irq_save(flags);
-	bfin_pm_setup();
+	bfin_pm_standby_setup();
 
 #ifdef CONFIG_PM_BFIN_SLEEP_DEEPER
 	sleep_deeper(bfin_sic_iwr[0], bfin_sic_iwr[1], bfin_sic_iwr[2]);
@@ -78,21 +80,203 @@ void bfin_pm_suspend_standby_enter(void)
 	sleep_mode(bfin_sic_iwr[0], bfin_sic_iwr[1], bfin_sic_iwr[2]);
 #endif
 
-	bfin_pm_restore();
+	bfin_pm_standby_restore();
 
 #if defined(CONFIG_BF54x) || defined(CONFIG_BF52x)  || defined(CONFIG_BF561)
-	bfin_write_SIC_IWR0(IWR_ENABLE_ALL);
-	bfin_write_SIC_IWR1(IWR_ENABLE_ALL);
+	bfin_write_SIC_IWR0(IWR_DISABLE_ALL);
+#if defined(CONFIG_BF52x)
+	/* BF52x system reset does not properly reset SIC_IWR1 which
+	 * will screw up the bootrom as it relies on MDMA0/1 waking it
+	 * up from IDLE instructions.  See this report for more info:
+	 * http://blackfin.uclinux.org/gf/tracker/4323
+	 */
+	bfin_write_SIC_IWR1(IWR_ENABLE(10) | IWR_ENABLE(11));
+#else
+	bfin_write_SIC_IWR1(IWR_DISABLE_ALL);
+#endif
 # ifdef CONFIG_BF54x
-	bfin_write_SIC_IWR2(IWR_ENABLE_ALL);
+	bfin_write_SIC_IWR2(IWR_DISABLE_ALL);
 # endif
 #else
-	bfin_write_SIC_IWR(IWR_ENABLE_ALL);
+	bfin_write_SIC_IWR(IWR_DISABLE_ALL);
 #endif
 
 	local_irq_restore(flags);
 }
 
+int bf53x_suspend_l1_mem(unsigned char *memptr)
+{
+	dma_memcpy(memptr, (const void *) L1_CODE_START, L1_CODE_LENGTH);
+	dma_memcpy(memptr + L1_CODE_LENGTH, (const void *) L1_DATA_A_START,
+			L1_DATA_A_LENGTH);
+	dma_memcpy(memptr + L1_CODE_LENGTH + L1_DATA_A_LENGTH,
+			(const void *) L1_DATA_B_START, L1_DATA_B_LENGTH);
+	memcpy(memptr + L1_CODE_LENGTH + L1_DATA_A_LENGTH +
+			L1_DATA_B_LENGTH, (const void *) L1_SCRATCH_START,
+			L1_SCRATCH_LENGTH);
+
+	return 0;
+}
+
+int bf53x_resume_l1_mem(unsigned char *memptr)
+{
+	dma_memcpy((void *) L1_CODE_START, memptr, L1_CODE_LENGTH);
+	dma_memcpy((void *) L1_DATA_A_START, memptr + L1_CODE_LENGTH,
+			L1_DATA_A_LENGTH);
+	dma_memcpy((void *) L1_DATA_B_START, memptr + L1_CODE_LENGTH +
+			L1_DATA_A_LENGTH, L1_DATA_B_LENGTH);
+	memcpy((void *) L1_SCRATCH_START, memptr + L1_CODE_LENGTH +
+			L1_DATA_A_LENGTH + L1_DATA_B_LENGTH, L1_SCRATCH_LENGTH);
+
+	return 0;
+}
+
+#ifdef CONFIG_BFIN_WB
+static void flushinv_all_dcache(void)
+{
+	u32 way, bank, subbank, set;
+	u32 status, addr;
+	u32 dmem_ctl = bfin_read_DMEM_CONTROL();
+
+	for (bank = 0; bank < 2; ++bank) {
+		if (!(dmem_ctl & (1 << (DMC1_P - bank))))
+			continue;
+
+		for (way = 0; way < 2; ++way)
+			for (subbank = 0; subbank < 4; ++subbank)
+				for (set = 0; set < 64; ++set) {
+
+					bfin_write_DTEST_COMMAND(
+						way << 26 |
+						bank << 23 |
+						subbank << 16 |
+						set << 5
+					);
+					CSYNC();
+					status = bfin_read_DTEST_DATA0();
+
+					/* only worry about valid/dirty entries */
+					if ((status & 0x3) != 0x3)
+						continue;
+
+					/* construct the address using the tag */
+					addr = (status & 0xFFFFC800) | (subbank << 12) | (set << 5);
+
+					/* flush it */
+					__asm__ __volatile__("FLUSHINV[%0];" : : "a"(addr));
+				}
+	}
+}
+#endif
+
+static inline void dcache_disable(void)
+{
+#ifdef CONFIG_BFIN_DCACHE
+	unsigned long ctrl;
+
+#ifdef CONFIG_BFIN_WB
+	flushinv_all_dcache();
+#endif
+	SSYNC();
+	ctrl = bfin_read_DMEM_CONTROL();
+	ctrl &= ~ENDCPLB;
+	bfin_write_DMEM_CONTROL(ctrl);
+	SSYNC();
+#endif
+}
+
+static inline void dcache_enable(void)
+{
+#ifdef CONFIG_BFIN_DCACHE
+	unsigned long ctrl;
+	SSYNC();
+	ctrl = bfin_read_DMEM_CONTROL();
+	ctrl |= ENDCPLB;
+	bfin_write_DMEM_CONTROL(ctrl);
+	SSYNC();
+#endif
+}
+
+static inline void icache_disable(void)
+{
+#ifdef CONFIG_BFIN_ICACHE
+	unsigned long ctrl;
+	SSYNC();
+	ctrl = bfin_read_IMEM_CONTROL();
+	ctrl &= ~ENICPLB;
+	bfin_write_IMEM_CONTROL(ctrl);
+	SSYNC();
+#endif
+}
+
+static inline void icache_enable(void)
+{
+#ifdef CONFIG_BFIN_ICACHE
+	unsigned long ctrl;
+	SSYNC();
+	ctrl = bfin_read_IMEM_CONTROL();
+	ctrl |= ENICPLB;
+	bfin_write_IMEM_CONTROL(ctrl);
+	SSYNC();
+#endif
+}
+
+int bfin_pm_suspend_mem_enter(void)
+{
+	unsigned long flags;
+	int wakeup, ret;
+
+	unsigned char *memptr = kmalloc(L1_CODE_LENGTH + L1_DATA_A_LENGTH
+					 + L1_DATA_B_LENGTH + L1_SCRATCH_LENGTH,
+					  GFP_KERNEL);
+
+	if (memptr == NULL) {
+		panic("bf53x_suspend_l1_mem malloc failed");
+		return -ENOMEM;
+	}
+
+	wakeup = bfin_read_VR_CTL() & ~FREQ;
+	wakeup |= SCKELOW;
+
+#ifdef CONFIG_PM_BFIN_WAKE_PH6
+	wakeup |= PHYWE;
+#endif
+#ifdef CONFIG_PM_BFIN_WAKE_GP
+	wakeup |= GPWE;
+#endif
+
+	local_irq_save(flags);
+
+	ret = blackfin_dma_suspend();
+
+	if (ret) {
+		local_irq_restore(flags);
+		kfree(memptr);
+		return ret;
+	}
+
+	bfin_gpio_pm_hibernate_suspend();
+
+	dcache_disable();
+	icache_disable();
+	bf53x_suspend_l1_mem(memptr);
+
+	do_hibernate(wakeup | vr_wakeup);	/* Goodbye */
+
+	bf53x_resume_l1_mem(memptr);
+
+	icache_enable();
+	dcache_enable();
+
+	bfin_gpio_pm_hibernate_restore();
+	blackfin_dma_resume();
+
+	local_irq_restore(flags);
+	kfree(memptr);
+
+	return 0;
+}
+
 /*
  *	bfin_pm_valid - Tell the PM core that we only support the standby sleep
  *			state
@@ -101,7 +285,24 @@ void bfin_pm_suspend_standby_enter(void)
  */
 static int bfin_pm_valid(suspend_state_t state)
 {
-	return (state == PM_SUSPEND_STANDBY);
+	return (state == PM_SUSPEND_STANDBY
+#ifndef BF533_FAMILY
+	/*
+	 * On BF533/2/1:
+	 * If we enter Hibernate the SCKE Pin is driven Low,
+	 * so that the SDRAM enters Self Refresh Mode.
+	 * However when the reset sequence that follows hibernate
+	 * state is executed, SCKE is driven High, taking the
+	 * SDRAM out of Self Refresh.
+	 *
+	 * If you reconfigure and access the SDRAM "very quickly",
+	 * you are likely to avoid errors, otherwise the SDRAM
+	 * start losing its contents.
+	 * An external HW workaround is possible using logic gates.
+	 */
+	|| state == PM_SUSPEND_MEM
+#endif
+	);
 }
 
 /*
@@ -115,10 +316,9 @@ static int bfin_pm_enter(suspend_state_t state)
 	case PM_SUSPEND_STANDBY:
 		bfin_pm_suspend_standby_enter();
 		break;
-
 	case PM_SUSPEND_MEM:
-		return -ENOTSUPP;
-
+		bfin_pm_suspend_mem_enter();
+		break;
 	default:
 		return -EINVAL;
 	}
diff --git a/arch/blackfin/mm/blackfin_sram.c b/arch/blackfin/mm/blackfin_sram.c
index 3246f91c7baa..4f5e887a0d96 100644
--- a/arch/blackfin/mm/blackfin_sram.c
+++ b/arch/blackfin/mm/blackfin_sram.c
@@ -41,215 +41,309 @@
 #include <asm/blackfin.h>
 #include "blackfin_sram.h"
 
-spinlock_t l1sram_lock, l1_data_sram_lock, l1_inst_sram_lock;
-
-#if CONFIG_L1_MAX_PIECE < 16
-#undef CONFIG_L1_MAX_PIECE
-#define CONFIG_L1_MAX_PIECE        16
-#endif
-
-#if CONFIG_L1_MAX_PIECE > 1024
-#undef CONFIG_L1_MAX_PIECE
-#define CONFIG_L1_MAX_PIECE        1024
-#endif
-
-#define SRAM_SLT_NULL      0
-#define SRAM_SLT_FREE      1
-#define SRAM_SLT_ALLOCATED 2
+static spinlock_t l1sram_lock, l1_data_sram_lock, l1_inst_sram_lock;
+static spinlock_t l2_sram_lock;
 
 /* the data structure for L1 scratchpad and DATA SRAM */
-struct l1_sram_piece {
+struct sram_piece {
 	void *paddr;
 	int size;
-	int flag;
 	pid_t pid;
+	struct sram_piece *next;
 };
 
-static struct l1_sram_piece l1_ssram[CONFIG_L1_MAX_PIECE];
+static struct sram_piece free_l1_ssram_head, used_l1_ssram_head;
 
 #if L1_DATA_A_LENGTH != 0
-static struct l1_sram_piece l1_data_A_sram[CONFIG_L1_MAX_PIECE];
+static struct sram_piece free_l1_data_A_sram_head, used_l1_data_A_sram_head;
 #endif
 
 #if L1_DATA_B_LENGTH != 0
-static struct l1_sram_piece l1_data_B_sram[CONFIG_L1_MAX_PIECE];
+static struct sram_piece free_l1_data_B_sram_head, used_l1_data_B_sram_head;
 #endif
 
 #if L1_CODE_LENGTH != 0
-static struct l1_sram_piece l1_inst_sram[CONFIG_L1_MAX_PIECE];
+static struct sram_piece free_l1_inst_sram_head, used_l1_inst_sram_head;
+#endif
+
+#if L2_LENGTH != 0
+static struct sram_piece free_l2_sram_head, used_l2_sram_head;
 #endif
 
+static struct kmem_cache *sram_piece_cache;
+
 /* L1 Scratchpad SRAM initialization function */
-void __init l1sram_init(void)
+static void __init l1sram_init(void)
 {
-	printk(KERN_INFO "Blackfin Scratchpad data SRAM: %d KB\n",
-	       L1_SCRATCH_LENGTH >> 10);
+	free_l1_ssram_head.next =
+		kmem_cache_alloc(sram_piece_cache, GFP_KERNEL);
+	if (!free_l1_ssram_head.next) {
+		printk(KERN_INFO"Fail to initialize Scratchpad data SRAM.\n");
+		return;
+	}
+
+	free_l1_ssram_head.next->paddr = (void *)L1_SCRATCH_START;
+	free_l1_ssram_head.next->size = L1_SCRATCH_LENGTH;
+	free_l1_ssram_head.next->pid = 0;
+	free_l1_ssram_head.next->next = NULL;
 
-	memset(&l1_ssram, 0x00, sizeof(l1_ssram));
-	l1_ssram[0].paddr = (void *)L1_SCRATCH_START;
-	l1_ssram[0].size = L1_SCRATCH_LENGTH;
-	l1_ssram[0].flag = SRAM_SLT_FREE;
+	used_l1_ssram_head.next = NULL;
 
 	/* mutex initialize */
 	spin_lock_init(&l1sram_lock);
+
+	printk(KERN_INFO "Blackfin Scratchpad data SRAM: %d KB\n",
+	       L1_SCRATCH_LENGTH >> 10);
 }
 
-void __init l1_data_sram_init(void)
+static void __init l1_data_sram_init(void)
 {
 #if L1_DATA_A_LENGTH != 0
-	memset(&l1_data_A_sram, 0x00, sizeof(l1_data_A_sram));
-	l1_data_A_sram[0].paddr = (void *)L1_DATA_A_START +
-					(_ebss_l1 - _sdata_l1);
-	l1_data_A_sram[0].size = L1_DATA_A_LENGTH - (_ebss_l1 - _sdata_l1);
-	l1_data_A_sram[0].flag = SRAM_SLT_FREE;
-
-	printk(KERN_INFO "Blackfin Data A SRAM: %d KB (%d KB free)\n",
-	       L1_DATA_A_LENGTH >> 10, l1_data_A_sram[0].size >> 10);
+	free_l1_data_A_sram_head.next =
+		kmem_cache_alloc(sram_piece_cache, GFP_KERNEL);
+	if (!free_l1_data_A_sram_head.next) {
+		printk(KERN_INFO"Fail to initialize L1 Data A SRAM.\n");
+		return;
+	}
+
+	free_l1_data_A_sram_head.next->paddr =
+		(void *)L1_DATA_A_START + (_ebss_l1 - _sdata_l1);
+	free_l1_data_A_sram_head.next->size =
+		L1_DATA_A_LENGTH - (_ebss_l1 - _sdata_l1);
+	free_l1_data_A_sram_head.next->pid = 0;
+	free_l1_data_A_sram_head.next->next = NULL;
+
+	used_l1_data_A_sram_head.next = NULL;
+
+	printk(KERN_INFO "Blackfin L1 Data A SRAM: %d KB (%d KB free)\n",
+		L1_DATA_A_LENGTH >> 10,
+		free_l1_data_A_sram_head.next->size >> 10);
 #endif
 #if L1_DATA_B_LENGTH != 0
-	memset(&l1_data_B_sram, 0x00, sizeof(l1_data_B_sram));
-	l1_data_B_sram[0].paddr = (void *)L1_DATA_B_START +
-				(_ebss_b_l1 - _sdata_b_l1);
-	l1_data_B_sram[0].size = L1_DATA_B_LENGTH - (_ebss_b_l1 - _sdata_b_l1);
-	l1_data_B_sram[0].flag = SRAM_SLT_FREE;
-
-	printk(KERN_INFO "Blackfin Data B SRAM: %d KB (%d KB free)\n",
-	       L1_DATA_B_LENGTH >> 10, l1_data_B_sram[0].size >> 10);
+	free_l1_data_B_sram_head.next =
+		kmem_cache_alloc(sram_piece_cache, GFP_KERNEL);
+	if (!free_l1_data_B_sram_head.next) {
+		printk(KERN_INFO"Fail to initialize L1 Data B SRAM.\n");
+		return;
+	}
+
+	free_l1_data_B_sram_head.next->paddr =
+		(void *)L1_DATA_B_START + (_ebss_b_l1 - _sdata_b_l1);
+	free_l1_data_B_sram_head.next->size =
+		L1_DATA_B_LENGTH - (_ebss_b_l1 - _sdata_b_l1);
+	free_l1_data_B_sram_head.next->pid = 0;
+	free_l1_data_B_sram_head.next->next = NULL;
+
+	used_l1_data_B_sram_head.next = NULL;
+
+	printk(KERN_INFO "Blackfin L1 Data B SRAM: %d KB (%d KB free)\n",
+		L1_DATA_B_LENGTH >> 10,
+		free_l1_data_B_sram_head.next->size >> 10);
 #endif
 
 	/* mutex initialize */
 	spin_lock_init(&l1_data_sram_lock);
 }
 
-void __init l1_inst_sram_init(void)
+static void __init l1_inst_sram_init(void)
 {
 #if L1_CODE_LENGTH != 0
-	memset(&l1_inst_sram, 0x00, sizeof(l1_inst_sram));
-	l1_inst_sram[0].paddr = (void *)L1_CODE_START + (_etext_l1 - _stext_l1);
-	l1_inst_sram[0].size = L1_CODE_LENGTH - (_etext_l1 - _stext_l1);
-	l1_inst_sram[0].flag = SRAM_SLT_FREE;
+	free_l1_inst_sram_head.next =
+		kmem_cache_alloc(sram_piece_cache, GFP_KERNEL);
+	if (!free_l1_inst_sram_head.next) {
+		printk(KERN_INFO"Fail to initialize L1 Instruction SRAM.\n");
+		return;
+	}
+
+	free_l1_inst_sram_head.next->paddr =
+		(void *)L1_CODE_START + (_etext_l1 - _stext_l1);
+	free_l1_inst_sram_head.next->size =
+		L1_CODE_LENGTH - (_etext_l1 - _stext_l1);
+	free_l1_inst_sram_head.next->pid = 0;
+	free_l1_inst_sram_head.next->next = NULL;
 
-	printk(KERN_INFO "Blackfin Instruction SRAM: %d KB (%d KB free)\n",
-	       L1_CODE_LENGTH >> 10, l1_inst_sram[0].size >> 10);
+	used_l1_inst_sram_head.next = NULL;
+
+	printk(KERN_INFO "Blackfin L1 Instruction SRAM: %d KB (%d KB free)\n",
+		L1_CODE_LENGTH >> 10,
+		free_l1_inst_sram_head.next->size >> 10);
 #endif
 
 	/* mutex initialize */
 	spin_lock_init(&l1_inst_sram_lock);
 }
 
-/* L1 memory allocate function */
-static void *_l1_sram_alloc(size_t size, struct l1_sram_piece *pfree, int count)
+static void __init l2_sram_init(void)
 {
-	int i, index = 0;
-	void *addr = NULL;
+#if L2_LENGTH != 0
+	free_l2_sram_head.next =
+		kmem_cache_alloc(sram_piece_cache, GFP_KERNEL);
+	if (!free_l2_sram_head.next) {
+		printk(KERN_INFO"Fail to initialize L2 SRAM.\n");
+		return;
+	}
+
+	free_l2_sram_head.next->paddr = (void *)L2_START +
+		(_etext_l2 - _stext_l2) + (_edata_l2 - _sdata_l2);
+	free_l2_sram_head.next->size = L2_LENGTH -
+		(_etext_l2 - _stext_l2) + (_edata_l2 - _sdata_l2);
+	free_l2_sram_head.next->pid = 0;
+	free_l2_sram_head.next->next = NULL;
+
+	used_l2_sram_head.next = NULL;
 
-	if (size <= 0)
+	printk(KERN_INFO "Blackfin L2 SRAM: %d KB (%d KB free)\n",
+		L2_LENGTH >> 10,
+		free_l2_sram_head.next->size >> 10);
+#endif
+
+	/* mutex initialize */
+	spin_lock_init(&l2_sram_lock);
+}
+void __init bfin_sram_init(void)
+{
+	sram_piece_cache = kmem_cache_create("sram_piece_cache",
+				sizeof(struct sram_piece),
+				0, SLAB_PANIC, NULL);
+
+	l1sram_init();
+	l1_data_sram_init();
+	l1_inst_sram_init();
+	l2_sram_init();
+}
+
+/* SRAM allocate function */
+static void *_sram_alloc(size_t size, struct sram_piece *pfree_head,
+		struct sram_piece *pused_head)
+{
+	struct sram_piece *pslot, *plast, *pavail;
+
+	if (size <= 0 || !pfree_head || !pused_head)
 		return NULL;
 
 	/* Align the size */
 	size = (size + 3) & ~3;
 
-	/* not use the good method to match the best slot !!! */
-	/* search an available memory slot */
-	for (i = 0; i < count; i++) {
-		if ((pfree[i].flag == SRAM_SLT_FREE)
-		    && (pfree[i].size >= size)) {
-			addr = pfree[i].paddr;
-			pfree[i].flag = SRAM_SLT_ALLOCATED;
-			pfree[i].pid = current->pid;
-			index = i;
-			break;
-		}
+	pslot = pfree_head->next;
+	plast = pfree_head;
+
+	/* search an available piece slot */
+	while (pslot != NULL && size > pslot->size) {
+		plast = pslot;
+		pslot = pslot->next;
 	}
-	if (i >= count)
+
+	if (!pslot)
 		return NULL;
 
-	/* updated the NULL memory slot !!! */
-	if (pfree[i].size > size) {
-		for (i = 0; i < count; i++) {
-			if (pfree[i].flag == SRAM_SLT_NULL) {
-				pfree[i].pid = 0;
-				pfree[i].flag = SRAM_SLT_FREE;
-				pfree[i].paddr = addr + size;
-				pfree[i].size = pfree[index].size - size;
-				pfree[index].size = size;
-				break;
-			}
-		}
+	if (pslot->size == size) {
+		plast->next = pslot->next;
+		pavail = pslot;
+	} else {
+		pavail = kmem_cache_alloc(sram_piece_cache, GFP_KERNEL);
+
+		if (!pavail)
+			return NULL;
+
+		pavail->paddr = pslot->paddr;
+		pavail->size = size;
+		pslot->paddr += size;
+		pslot->size -= size;
 	}
 
-	return addr;
+	pavail->pid = current->pid;
+
+	pslot = pused_head->next;
+	plast = pused_head;
+
+	/* insert new piece into used piece list !!! */
+	while (pslot != NULL && pavail->paddr < pslot->paddr) {
+		plast = pslot;
+		pslot = pslot->next;
+	}
+
+	pavail->next = pslot;
+	plast->next = pavail;
+
+	return pavail->paddr;
 }
 
 /* Allocate the largest available block.  */
-static void *_l1_sram_alloc_max(struct l1_sram_piece *pfree, int count,
+static void *_sram_alloc_max(struct sram_piece *pfree_head,
+				struct sram_piece *pused_head,
 				unsigned long *psize)
 {
-	unsigned long best = 0;
-	int i, index = -1;
-	void *addr = NULL;
+	struct sram_piece *pslot, *pmax;
+
+	if (!pfree_head || !pused_head)
+		return NULL;
+
+	pmax = pslot = pfree_head->next;
 
-	/* search an available memory slot */
-	for (i = 0; i < count; i++) {
-		if (pfree[i].flag == SRAM_SLT_FREE && pfree[i].size > best) {
-			addr = pfree[i].paddr;
-			index = i;
-			best = pfree[i].size;
-		}
+	/* search an available piece slot */
+	while (pslot != NULL) {
+		if (pslot->size > pmax->size)
+			pmax = pslot;
+		pslot = pslot->next;
 	}
-	if (index < 0)
+
+	if (!pmax)
 		return NULL;
-	*psize = best;
 
-	pfree[index].pid = current->pid;
-	pfree[index].flag = SRAM_SLT_ALLOCATED;
-	return addr;
+	*psize = pmax->size;
+
+	return _sram_alloc(*psize, pfree_head, pused_head);
 }
 
-/* L1 memory free function */
-static int _l1_sram_free(const void *addr,
-			struct l1_sram_piece *pfree,
-			int count)
+/* SRAM free function */
+static int _sram_free(const void *addr,
+			struct sram_piece *pfree_head,
+			struct sram_piece *pused_head)
 {
-	int i, index = 0;
+	struct sram_piece *pslot, *plast, *pavail;
+
+	if (!pfree_head || !pused_head)
+		return -1;
 
 	/* search the relevant memory slot */
-	for (i = 0; i < count; i++) {
-		if (pfree[i].paddr == addr) {
-			if (pfree[i].flag != SRAM_SLT_ALLOCATED) {
-				/* error log */
-				return -1;
-			}
-			index = i;
-			break;
-		}
+	pslot = pused_head->next;
+	plast = pused_head;
+
+	/* search an available piece slot */
+	while (pslot != NULL && pslot->paddr != addr) {
+		plast = pslot;
+		pslot = pslot->next;
 	}
-	if (i >= count)
+
+	if (!pslot)
 		return -1;
 
-	pfree[index].pid = 0;
-	pfree[index].flag = SRAM_SLT_FREE;
-
-	/* link the next address slot */
-	for (i = 0; i < count; i++) {
-		if (((pfree[index].paddr + pfree[index].size) == pfree[i].paddr)
-		    && (pfree[i].flag == SRAM_SLT_FREE)) {
-			pfree[i].pid = 0;
-			pfree[i].flag = SRAM_SLT_NULL;
-			pfree[index].size += pfree[i].size;
-			pfree[index].flag = SRAM_SLT_FREE;
-			break;
-		}
+	plast->next = pslot->next;
+	pavail = pslot;
+	pavail->pid = 0;
+
+	/* insert free pieces back to the free list */
+	pslot = pfree_head->next;
+	plast = pfree_head;
+
+	while (pslot != NULL && addr > pslot->paddr) {
+		plast = pslot;
+		pslot = pslot->next;
+	}
+
+	if (plast != pfree_head && plast->paddr + plast->size == pavail->paddr) {
+		plast->size += pavail->size;
+		kmem_cache_free(sram_piece_cache, pavail);
+	} else {
+		pavail->next = plast->next;
+		plast->next = pavail;
+		plast = pavail;
 	}
 
-	/* link the last address slot */
-	for (i = 0; i < count; i++) {
-		if (((pfree[i].paddr + pfree[i].size) == pfree[index].paddr) &&
-		    (pfree[i].flag == SRAM_SLT_FREE)) {
-			pfree[index].flag = SRAM_SLT_NULL;
-			pfree[i].size += pfree[index].size;
-			break;
-		}
+	if (pslot && plast->paddr + plast->size == pslot->paddr) {
+		plast->size += pslot->size;
+		plast->next = pslot->next;
+		kmem_cache_free(sram_piece_cache, pslot);
 	}
 
 	return 0;
@@ -273,6 +367,11 @@ int sram_free(const void *addr)
 		 && addr < (void *)(L1_DATA_B_START + L1_DATA_B_LENGTH))
 		return l1_data_B_sram_free(addr);
 #endif
+#if L2_LENGTH != 0
+	else if (addr >= (void *)L2_START
+		 && addr < (void *)(L2_START + L2_LENGTH))
+		return l2_sram_free(addr);
+#endif
 	else
 		return -1;
 }
@@ -280,14 +379,15 @@ EXPORT_SYMBOL(sram_free);
 
 void *l1_data_A_sram_alloc(size_t size)
 {
-	unsigned flags;
+	unsigned long flags;
 	void *addr = NULL;
 
 	/* add mutex operation */
 	spin_lock_irqsave(&l1_data_sram_lock, flags);
 
 #if L1_DATA_A_LENGTH != 0
-	addr = _l1_sram_alloc(size, l1_data_A_sram, ARRAY_SIZE(l1_data_A_sram));
+	addr = _sram_alloc(size, &free_l1_data_A_sram_head,
+			&used_l1_data_A_sram_head);
 #endif
 
 	/* add mutex operation */
@@ -302,15 +402,15 @@ EXPORT_SYMBOL(l1_data_A_sram_alloc);
 
 int l1_data_A_sram_free(const void *addr)
 {
-	unsigned flags;
+	unsigned long flags;
 	int ret;
 
 	/* add mutex operation */
 	spin_lock_irqsave(&l1_data_sram_lock, flags);
 
 #if L1_DATA_A_LENGTH != 0
-	ret = _l1_sram_free(addr,
-			   l1_data_A_sram, ARRAY_SIZE(l1_data_A_sram));
+	ret = _sram_free(addr, &free_l1_data_A_sram_head,
+			&used_l1_data_A_sram_head);
 #else
 	ret = -1;
 #endif
@@ -325,13 +425,14 @@ EXPORT_SYMBOL(l1_data_A_sram_free);
 void *l1_data_B_sram_alloc(size_t size)
 {
 #if L1_DATA_B_LENGTH != 0
-	unsigned flags;
+	unsigned long flags;
 	void *addr;
 
 	/* add mutex operation */
 	spin_lock_irqsave(&l1_data_sram_lock, flags);
 
-	addr = _l1_sram_alloc(size, l1_data_B_sram, ARRAY_SIZE(l1_data_B_sram));
+	addr = _sram_alloc(size, &free_l1_data_B_sram_head,
+			&used_l1_data_B_sram_head);
 
 	/* add mutex operation */
 	spin_unlock_irqrestore(&l1_data_sram_lock, flags);
@@ -349,13 +450,14 @@ EXPORT_SYMBOL(l1_data_B_sram_alloc);
 int l1_data_B_sram_free(const void *addr)
 {
 #if L1_DATA_B_LENGTH != 0
-	unsigned flags;
+	unsigned long flags;
 	int ret;
 
 	/* add mutex operation */
 	spin_lock_irqsave(&l1_data_sram_lock, flags);
 
-	ret = _l1_sram_free(addr, l1_data_B_sram, ARRAY_SIZE(l1_data_B_sram));
+	ret = _sram_free(addr, &free_l1_data_B_sram_head,
+			&used_l1_data_B_sram_head);
 
 	/* add mutex operation */
 	spin_unlock_irqrestore(&l1_data_sram_lock, flags);
@@ -402,13 +504,14 @@ EXPORT_SYMBOL(l1_data_sram_free);
 void *l1_inst_sram_alloc(size_t size)
 {
 #if L1_CODE_LENGTH != 0
-	unsigned flags;
+	unsigned long flags;
 	void *addr;
 
 	/* add mutex operation */
 	spin_lock_irqsave(&l1_inst_sram_lock, flags);
 
-	addr = _l1_sram_alloc(size, l1_inst_sram, ARRAY_SIZE(l1_inst_sram));
+	addr = _sram_alloc(size, &free_l1_inst_sram_head,
+			&used_l1_inst_sram_head);
 
 	/* add mutex operation */
 	spin_unlock_irqrestore(&l1_inst_sram_lock, flags);
@@ -426,13 +529,14 @@ EXPORT_SYMBOL(l1_inst_sram_alloc);
 int l1_inst_sram_free(const void *addr)
 {
 #if L1_CODE_LENGTH != 0
-	unsigned flags;
+	unsigned long flags;
 	int ret;
 
 	/* add mutex operation */
 	spin_lock_irqsave(&l1_inst_sram_lock, flags);
 
-	ret = _l1_sram_free(addr, l1_inst_sram, ARRAY_SIZE(l1_inst_sram));
+	ret = _sram_free(addr, &free_l1_inst_sram_head,
+			&used_l1_inst_sram_head);
 
 	/* add mutex operation */
 	spin_unlock_irqrestore(&l1_inst_sram_lock, flags);
@@ -447,13 +551,14 @@ EXPORT_SYMBOL(l1_inst_sram_free);
 /* L1 Scratchpad memory allocate function */
 void *l1sram_alloc(size_t size)
 {
-	unsigned flags;
+	unsigned long flags;
 	void *addr;
 
 	/* add mutex operation */
 	spin_lock_irqsave(&l1sram_lock, flags);
 
-	addr = _l1_sram_alloc(size, l1_ssram, ARRAY_SIZE(l1_ssram));
+	addr = _sram_alloc(size, &free_l1_ssram_head,
+			&used_l1_ssram_head);
 
 	/* add mutex operation */
 	spin_unlock_irqrestore(&l1sram_lock, flags);
@@ -464,13 +569,14 @@ void *l1sram_alloc(size_t size)
 /* L1 Scratchpad memory allocate function */
 void *l1sram_alloc_max(size_t *psize)
 {
-	unsigned flags;
+	unsigned long flags;
 	void *addr;
 
 	/* add mutex operation */
 	spin_lock_irqsave(&l1sram_lock, flags);
 
-	addr = _l1_sram_alloc_max(l1_ssram, ARRAY_SIZE(l1_ssram), psize);
+	addr = _sram_alloc_max(&free_l1_ssram_head,
+			&used_l1_ssram_head, psize);
 
 	/* add mutex operation */
 	spin_unlock_irqrestore(&l1sram_lock, flags);
@@ -481,13 +587,14 @@ void *l1sram_alloc_max(size_t *psize)
 /* L1 Scratchpad memory free function */
 int l1sram_free(const void *addr)
 {
-	unsigned flags;
+	unsigned long flags;
 	int ret;
 
 	/* add mutex operation */
 	spin_lock_irqsave(&l1sram_lock, flags);
 
-	ret = _l1_sram_free(addr, l1_ssram, ARRAY_SIZE(l1_ssram));
+	ret = _sram_free(addr, &free_l1_ssram_head,
+			&used_l1_ssram_head);
 
 	/* add mutex operation */
 	spin_unlock_irqrestore(&l1sram_lock, flags);
@@ -495,6 +602,64 @@ int l1sram_free(const void *addr)
 	return ret;
 }
 
+void *l2_sram_alloc(size_t size)
+{
+#if L2_LENGTH != 0
+	unsigned long flags;
+	void *addr;
+
+	/* add mutex operation */
+	spin_lock_irqsave(&l2_sram_lock, flags);
+
+	addr = _sram_alloc(size, &free_l2_sram_head,
+			&used_l2_sram_head);
+
+	/* add mutex operation */
+	spin_unlock_irqrestore(&l2_sram_lock, flags);
+
+	pr_debug("Allocated address in l2_sram_alloc is 0x%lx+0x%lx\n",
+		 (long unsigned int)addr, size);
+
+	return addr;
+#else
+	return NULL;
+#endif
+}
+EXPORT_SYMBOL(l2_sram_alloc);
+
+void *l2_sram_zalloc(size_t size)
+{
+	void *addr = l2_sram_alloc(size);
+
+	if (addr)
+		memset(addr, 0x00, size);
+
+	return addr;
+}
+EXPORT_SYMBOL(l2_sram_zalloc);
+
+int l2_sram_free(const void *addr)
+{
+#if L2_LENGTH != 0
+	unsigned long flags;
+	int ret;
+
+	/* add mutex operation */
+	spin_lock_irqsave(&l2_sram_lock, flags);
+
+	ret = _sram_free(addr, &free_l2_sram_head,
+			&used_l2_sram_head);
+
+	/* add mutex operation */
+	spin_unlock_irqrestore(&l2_sram_lock, flags);
+
+	return ret;
+#else
+	return -1;
+#endif
+}
+EXPORT_SYMBOL(l2_sram_free);
+
 int sram_free_with_lsl(const void *addr)
 {
 	struct sram_list_struct *lsl, **tmp;
@@ -533,6 +698,9 @@ void *sram_alloc_with_lsl(size_t size, unsigned long flags)
 	if (addr == NULL && (flags & L1_DATA_B_SRAM))
 		addr = l1_data_B_sram_alloc(size);
 
+	if (addr == NULL && (flags & L2_SRAM))
+		addr = l2_sram_alloc(size);
+
 	if (addr == NULL) {
 		kfree(lsl);
 		return NULL;
@@ -549,49 +717,80 @@ EXPORT_SYMBOL(sram_alloc_with_lsl);
 /* Once we get a real allocator, we'll throw all of this away.
  * Until then, we need some sort of visibility into the L1 alloc.
  */
-static void _l1sram_proc_read(char *buf, int *len, const char *desc,
-		struct l1_sram_piece *pfree, const int array_size)
+/* Need to keep line of output the same.  Currently, that is 44 bytes
+ * (including newline).
+ */
+static int _sram_proc_read(char *buf, int *len, int count, const char *desc,
+		struct sram_piece *pfree_head,
+		struct sram_piece *pused_head)
 {
-	int i;
-
-	*len += sprintf(&buf[*len], "--- L1 %-14s Size  PID State\n", desc);
-	for (i = 0; i < array_size; ++i) {
-		const char *alloc_type;
-		switch (pfree[i].flag) {
-		case SRAM_SLT_NULL:      alloc_type = "NULL"; break;
-		case SRAM_SLT_FREE:      alloc_type = "FREE"; break;
-		case SRAM_SLT_ALLOCATED: alloc_type = "ALLOCATED"; break;
-		default:                 alloc_type = "????"; break;
-		}
-		*len += sprintf(&buf[*len], "%p-%p %8i %4i %s\n",
-			pfree[i].paddr, pfree[i].paddr + pfree[i].size,
-			pfree[i].size, pfree[i].pid, alloc_type);
+	struct sram_piece *pslot;
+
+	if (!pfree_head || !pused_head)
+		return -1;
+
+	*len += sprintf(&buf[*len], "--- SRAM %-14s Size   PID State     \n", desc);
+
+	/* search the relevant memory slot */
+	pslot = pused_head->next;
+
+	while (pslot != NULL) {
+		*len += sprintf(&buf[*len], "%p-%p %10i %5i %-10s\n",
+			pslot->paddr, pslot->paddr + pslot->size,
+			pslot->size, pslot->pid, "ALLOCATED");
+
+		pslot = pslot->next;
 	}
+
+	pslot = pfree_head->next;
+
+	while (pslot != NULL) {
+		*len += sprintf(&buf[*len], "%p-%p %10i %5i %-10s\n",
+			pslot->paddr, pslot->paddr + pslot->size,
+			pslot->size, pslot->pid, "FREE");
+
+		pslot = pslot->next;
+	}
+
+	return 0;
 }
-static int l1sram_proc_read(char *buf, char **start, off_t offset, int count,
+static int sram_proc_read(char *buf, char **start, off_t offset, int count,
 		int *eof, void *data)
 {
 	int len = 0;
 
-	_l1sram_proc_read(buf, &len, "Scratchpad",
-			l1_ssram, ARRAY_SIZE(l1_ssram));
+	if (_sram_proc_read(buf, &len, count, "Scratchpad",
+			&free_l1_ssram_head, &used_l1_ssram_head))
+		goto not_done;
 #if L1_DATA_A_LENGTH != 0
-	_l1sram_proc_read(buf, &len, "Data A",
-			l1_data_A_sram, ARRAY_SIZE(l1_data_A_sram));
+	if (_sram_proc_read(buf, &len, count, "L1 Data A",
+			&free_l1_data_A_sram_head,
+			&used_l1_data_A_sram_head))
+		goto not_done;
 #endif
 #if L1_DATA_B_LENGTH != 0
-	_l1sram_proc_read(buf, &len, "Data B",
-			l1_data_B_sram, ARRAY_SIZE(l1_data_B_sram));
+	if (_sram_proc_read(buf, &len, count, "L1 Data B",
+			&free_l1_data_B_sram_head,
+			&used_l1_data_B_sram_head))
+		goto not_done;
 #endif
 #if L1_CODE_LENGTH != 0
-	_l1sram_proc_read(buf, &len, "Instruction",
-			l1_inst_sram, ARRAY_SIZE(l1_inst_sram));
+	if (_sram_proc_read(buf, &len, count, "L1 Instruction",
+			&free_l1_inst_sram_head, &used_l1_inst_sram_head))
+		goto not_done;
+#endif
+#if L2_LENGTH != 0
+	if (_sram_proc_read(buf, &len, count, "L2",
+			&free_l2_sram_head, &used_l2_sram_head))
+		goto not_done;
 #endif
 
+	*eof = 1;
+ not_done:
 	return len;
 }
 
-static int __init l1sram_proc_init(void)
+static int __init sram_proc_init(void)
 {
 	struct proc_dir_entry *ptr;
 	ptr = create_proc_entry("sram", S_IFREG | S_IRUGO, NULL);
@@ -600,8 +799,8 @@ static int __init l1sram_proc_init(void)
 		return -1;
 	}
 	ptr->owner = THIS_MODULE;
-	ptr->read_proc = l1sram_proc_read;
+	ptr->read_proc = sram_proc_read;
 	return 0;
 }
-late_initcall(l1sram_proc_init);
+late_initcall(sram_proc_init);
 #endif
diff --git a/arch/blackfin/mm/blackfin_sram.h b/arch/blackfin/mm/blackfin_sram.h
index 0fb73b78dd60..8cb0945563f9 100644
--- a/arch/blackfin/mm/blackfin_sram.h
+++ b/arch/blackfin/mm/blackfin_sram.h
@@ -30,9 +30,7 @@
 #ifndef __BLACKFIN_SRAM_H__
 #define __BLACKFIN_SRAM_H__
 
-extern void l1sram_init(void);
-extern void l1_inst_sram_init(void);
-extern void l1_data_sram_init(void);
+extern void bfin_sram_init(void);
 extern void *l1sram_alloc(size_t);
 
 #endif
diff --git a/arch/blackfin/mm/init.c b/arch/blackfin/mm/init.c
index ec3141fefd20..bc240abb8745 100644
--- a/arch/blackfin/mm/init.c
+++ b/arch/blackfin/mm/init.c
@@ -53,33 +53,6 @@ static unsigned long empty_bad_page;
 
 unsigned long empty_zero_page;
 
-void show_mem(void)
-{
-	unsigned long i;
-	int free = 0, total = 0, reserved = 0, shared = 0;
-
-	int cached = 0;
-	printk(KERN_INFO "Mem-info:\n");
-	show_free_areas();
-	i = max_mapnr;
-	while (i-- > 0) {
-		total++;
-		if (PageReserved(mem_map + i))
-			reserved++;
-		else if (PageSwapCache(mem_map + i))
-			cached++;
-		else if (!page_count(mem_map + i))
-			free++;
-		else
-			shared += page_count(mem_map + i) - 1;
-	}
-	printk(KERN_INFO "%d pages of RAM\n", total);
-	printk(KERN_INFO "%d free pages\n", free);
-	printk(KERN_INFO "%d reserved pages\n", reserved);
-	printk(KERN_INFO "%d pages shared\n", shared);
-	printk(KERN_INFO "%d pages swap cached\n", cached);
-}
-
 /*
  * paging_init() continues the virtual memory environment setup which
  * was begun by the code in arch/head.S.
@@ -164,11 +137,14 @@ void __init mem_init(void)
 		"(%uk init code, %uk kernel code, %uk data, %uk dma, %uk reserved)\n",
 		(unsigned long) freepages << (PAGE_SHIFT-10), _ramend >> 10,
 		initk, codek, datak, DMA_UNCACHED_REGION >> 10, (reservedpages << (PAGE_SHIFT-10)));
+}
+
+static int __init sram_init(void)
+{
+	unsigned long tmp;
 
 	/* Initialize the blackfin L1 Memory. */
-	l1sram_init();
-	l1_data_sram_init();
-	l1_inst_sram_init();
+	bfin_sram_init();
 
 	/* Allocate this once; never free it.  We assume this gives us a
 	   pointer to the start of L1 scratchpad memory; panic if it
@@ -179,7 +155,10 @@ void __init mem_init(void)
 			tmp, (unsigned long)L1_SCRATCH_TASK_INFO);
 		panic("No L1, time to give up\n");
 	}
+
+	return 0;
 }
+pure_initcall(sram_init);
 
 static void __init free_init_pages(const char *what, unsigned long begin, unsigned long end)
 {
diff --git a/arch/cris/arch-v10/boot/compressed/misc.c b/arch/cris/arch-v10/boot/compressed/misc.c
index 18e13bce1400..d933c89889db 100644
--- a/arch/cris/arch-v10/boot/compressed/misc.c
+++ b/arch/cris/arch-v10/boot/compressed/misc.c
@@ -102,50 +102,16 @@ extern char *input_data;  /* lives in head.S */
 static long bytes_out = 0;
 static uch *output_data;
 static unsigned long output_ptr = 0;
-
-static void *malloc(int size);
-static void free(void *where);
-static void gzip_mark(void **);
-static void gzip_release(void **);
-
 static void puts(const char *);
 
 /* the "heap" is put directly after the BSS ends, at end */
 
 extern int _end;
 static long free_mem_ptr = (long)&_end;
+static long free_mem_end_ptr;
 
 #include "../../../../../lib/inflate.c"
 
-static void *malloc(int size)
-{
-	void *p;
-
-	if (size < 0)
-		error("Malloc error");
-
-	free_mem_ptr = (free_mem_ptr + 3) & ~3;	/* Align */
-
-	p = (void *)free_mem_ptr;
-	free_mem_ptr += size;
-
-	return p;
-}
-
-static void free(void *where)
-{	/* Don't care */
-}
-
-static void gzip_mark(void **ptr)
-{
-	*ptr = (void *) free_mem_ptr;
-}
-
-static void gzip_release(void **ptr)
-{
-	free_mem_ptr = (long) *ptr;
-}
-
 /* decompressor info and error messages to serial console */
 
 static void
diff --git a/arch/cris/arch-v10/kernel/kgdb.c b/arch/cris/arch-v10/kernel/kgdb.c
index a3ca55150745..6fea45f2e40c 100644
--- a/arch/cris/arch-v10/kernel/kgdb.c
+++ b/arch/cris/arch-v10/kernel/kgdb.c
@@ -278,14 +278,6 @@ void putDebugChar (int val);
 
 void enableDebugIRQ (void);
 
-/* Returns the character equivalent of a nibble, bit 7, 6, 5, and 4 of a byte,
-   represented by int x. */
-static char highhex (int x);
-
-/* Returns the character equivalent of a nibble, bit 3, 2, 1, and 0 of a byte,
-   represented by int x. */
-static char lowhex (int x);
-
 /* Returns the integer equivalent of a hexadecimal character. */
 static int hex (char ch);
 
@@ -356,9 +348,6 @@ extern unsigned char executing_task;
 /* Run-length encoding maximum length. Send 64 at most. */
 #define RUNLENMAX 64
 
-/* Definition of all valid hexadecimal characters */
-static const char hexchars[] = "0123456789abcdef";
-
 /* The inbound/outbound buffers used in packet I/O */
 static char remcomInBuffer[BUFMAX];
 static char remcomOutBuffer[BUFMAX];
@@ -499,8 +488,8 @@ gdb_cris_strtol (const char *s, char **endptr, int base)
 	char *sd;
 	int x = 0;
 	
-	for (s1 = (char*)s; (sd = gdb_cris_memchr(hexchars, *s1, base)) != NULL; ++s1)
-		x = x * base + (sd - hexchars);
+	for (s1 = (char*)s; (sd = gdb_cris_memchr(hex_asc, *s1, base)) != NULL; ++s1)
+		x = x * base + (sd - hex_asc);
         
         if (endptr)
         {
@@ -670,22 +659,6 @@ read_register (char regno, unsigned int *valptr)
 }
 
 /********************************** Packet I/O ******************************/
-/* Returns the character equivalent of a nibble, bit 7, 6, 5, and 4 of a byte,
-   represented by int x. */
-static inline char
-highhex(int x)
-{
-	return hexchars[(x >> 4) & 0xf];
-}
-
-/* Returns the character equivalent of a nibble, bit 3, 2, 1, and 0 of a byte,
-   represented by int x. */
-static inline char
-lowhex(int x)
-{
-	return hexchars[x & 0xf];
-}
-
 /* Returns the integer equivalent of a hexadecimal character. */
 static int
 hex (char ch)
@@ -721,8 +694,7 @@ mem2hex(char *buf, unsigned char *mem, int count)
                 /* Valid mem address. */
                 for (i = 0; i < count; i++) {
                         ch = *mem++;
-                        *buf++ = highhex (ch);
-                        *buf++ = lowhex (ch);
+			buf = pack_hex_byte(buf, ch);
                 }
         }
         
@@ -857,9 +829,9 @@ putpacket(char *buffer)
 				src++;
 			}
 		}
-		putDebugChar ('#');
-		putDebugChar (highhex (checksum));
-		putDebugChar (lowhex (checksum));
+		putDebugChar('#');
+		putDebugChar(hex_asc_hi(checksum));
+		putDebugChar(hex_asc_lo(checksum));
 	} while(kgdb_started && (getDebugChar() != '+'));
 }
 
@@ -895,9 +867,8 @@ stub_is_stopped(int sigval)
         
 	/* Send trap type (converted to signal) */
 
-	*ptr++ = 'T';	
-	*ptr++ = highhex (sigval);
-	*ptr++ = lowhex (sigval);
+	*ptr++ = 'T';
+	ptr = pack_hex_byte(ptr, sigval);
 
 	/* Send register contents. We probably only need to send the
 	 * PC, frame pointer and stack pointer here. Other registers will be
@@ -910,9 +881,7 @@ stub_is_stopped(int sigval)
                 status = read_register (regno, &reg_cont);
                 
 		if (status == SUCCESS) {
-                        
-                        *ptr++ = highhex (regno);
-                        *ptr++ = lowhex (regno);
+			ptr = pack_hex_byte(ptr, regno);
                         *ptr++ = ':';
 
                         ptr = mem2hex(ptr, (unsigned char *)&reg_cont,
@@ -937,8 +906,8 @@ stub_is_stopped(int sigval)
 	/* Store thread:r...; with the executing task TID. */
 	gdb_cris_strcpy (&remcomOutBuffer[pos], "thread:");
 	pos += gdb_cris_strlen ("thread:");
-	remcomOutBuffer[pos++] = highhex (executing_task);
-	remcomOutBuffer[pos++] = lowhex (executing_task);
+	remcomOutBuffer[pos++] = hex_asc_hi(executing_task);
+	remcomOutBuffer[pos++] = hex_asc_lo(executing_task);
 	gdb_cris_strcpy (&remcomOutBuffer[pos], ";");
 #endif
 
@@ -1126,8 +1095,8 @@ handle_exception (int sigval)
 				   Success: SAA, where AA is the signal number.
 				   Failure: void. */
 				remcomOutBuffer[0] = 'S';
-				remcomOutBuffer[1] = highhex (sigval);
-				remcomOutBuffer[2] = lowhex (sigval);
+				remcomOutBuffer[1] = hex_asc_hi(sigval);
+				remcomOutBuffer[2] = hex_asc_lo(sigval);
 				remcomOutBuffer[3] = 0;
 				break;
 				
@@ -1224,23 +1193,23 @@ handle_exception (int sigval)
 						case 'C':
 							/* Identify the remote current thread. */
 							gdb_cris_strcpy (&remcomOutBuffer[0], "QC");
-							remcomOutBuffer[2] = highhex (current_thread_c);
-							remcomOutBuffer[3] = lowhex (current_thread_c);
+							remcomOutBuffer[2] = hex_asc_hi(current_thread_c);
+							remcomOutBuffer[3] = hex_asc_lo(current_thread_c);
 							remcomOutBuffer[4] = '\0';
 							break;
 						case 'L':
 							gdb_cris_strcpy (&remcomOutBuffer[0], "QM");
 							/* Reply with number of threads. */
 							if (os_is_started()) {
-								remcomOutBuffer[2] = highhex (number_of_tasks);
-								remcomOutBuffer[3] = lowhex (number_of_tasks);
+								remcomOutBuffer[2] = hex_asc_hi(number_of_tasks);
+								remcomOutBuffer[3] = hex_asc_lo(number_of_tasks);
 							}
 							else {
-								remcomOutBuffer[2] = highhex (0);
-								remcomOutBuffer[3] = lowhex (1);
+								remcomOutBuffer[2] = hex_asc_hi(0);
+								remcomOutBuffer[3] = hex_asc_lo(1);
 							}
 							/* Done with the reply. */
-							remcomOutBuffer[4] = lowhex (1);
+							remcomOutBuffer[4] = hex_asc_lo(1);
 							pos = 5;
 							/* Expects the argument thread id. */
 							for (; pos < (5 + HEXCHARS_IN_THREAD_ID); pos++)
@@ -1251,16 +1220,16 @@ handle_exception (int sigval)
 								for (thread_id = 0; thread_id < number_of_tasks; thread_id++) {
 									nextpos = pos + HEXCHARS_IN_THREAD_ID - 1;
 									for (; pos < nextpos; pos ++)
-										remcomOutBuffer[pos] = lowhex (0);
-									remcomOutBuffer[pos++] = lowhex (thread_id);
+										remcomOutBuffer[pos] = hex_asc_lo(0);
+									remcomOutBuffer[pos++] = hex_asc_lo(thread_id);
 								}
 							}
 							else {
 								/* Store the thread identifier of the boot task. */
 								nextpos = pos + HEXCHARS_IN_THREAD_ID - 1;
 								for (; pos < nextpos; pos ++)
-									remcomOutBuffer[pos] = lowhex (0);
-								remcomOutBuffer[pos++] = lowhex (current_thread_c);
+									remcomOutBuffer[pos] = hex_asc_lo(0);
+								remcomOutBuffer[pos++] = hex_asc_lo(current_thread_c);
 							}
 							remcomOutBuffer[pos] = '\0';
 							break;
diff --git a/arch/cris/arch-v32/boot/compressed/misc.c b/arch/cris/arch-v32/boot/compressed/misc.c
index 55b2695c5d70..3595e16e82bc 100644
--- a/arch/cris/arch-v32/boot/compressed/misc.c
+++ b/arch/cris/arch-v32/boot/compressed/misc.c
@@ -89,20 +89,14 @@ static unsigned outcnt = 0;  /* bytes in output buffer */
 
 static void flush_window(void);
 static void error(char *m);
-static void gzip_mark(void **);
-static void gzip_release(void **);
 
 extern char *input_data;  /* lives in head.S */
 
-static long bytes_out = 0;
+static long bytes_out;
 static uch *output_data;
-static unsigned long output_ptr = 0;
+static unsigned long output_ptr;
 
-static void *malloc(int size);
-static void free(void *where);
 static void error(char *m);
-static void gzip_mark(void **);
-static void gzip_release(void **);
 
 static void puts(const char *);
 
@@ -110,37 +104,10 @@ static void puts(const char *);
 
 extern int _end;
 static long free_mem_ptr = (long)&_end;
+static long free_mem_end_ptr;
 
 #include "../../../../../lib/inflate.c"
 
-static void *malloc(int size)
-{
-	void *p;
-
-	if (size <0) error("Malloc error");
-
-	free_mem_ptr = (free_mem_ptr + 3) & ~3;	/* Align */
-
-	p = (void *)free_mem_ptr;
-	free_mem_ptr += size;
-
-	return p;
-}
-
-static void free(void *where)
-{	/* Don't care */
-}
-
-static void gzip_mark(void **ptr)
-{
-	*ptr = (void *) free_mem_ptr;
-}
-
-static void gzip_release(void **ptr)
-{
-	free_mem_ptr = (long) *ptr;
-}
-
 /* decompressor info and error messages to serial console */
 
 static inline void
diff --git a/arch/cris/arch-v32/drivers/Kconfig b/arch/cris/arch-v32/drivers/Kconfig
index 2a92cb1886ca..7a64fcef9d07 100644
--- a/arch/cris/arch-v32/drivers/Kconfig
+++ b/arch/cris/arch-v32/drivers/Kconfig
@@ -641,6 +641,7 @@ config PCI
        bool
        depends on ETRAX_CARDBUS
        default y
+       select HAVE_GENERIC_DMA_COHERENT
 
 config ETRAX_IOP_FW_LOAD
 	tristate "IO-processor hotplug firmware loading support"
diff --git a/arch/cris/arch-v32/drivers/pci/dma.c b/arch/cris/arch-v32/drivers/pci/dma.c
index e0364654fc44..fbe65954ee6c 100644
--- a/arch/cris/arch-v32/drivers/pci/dma.c
+++ b/arch/cris/arch-v32/drivers/pci/dma.c
@@ -15,35 +15,16 @@
 #include <linux/pci.h>
 #include <asm/io.h>
 
-struct dma_coherent_mem {
-	void		*virt_base;
-	u32		device_base;
-	int		size;
-	int		flags;
-	unsigned long	*bitmap;
-};
-
 void *dma_alloc_coherent(struct device *dev, size_t size,
 			   dma_addr_t *dma_handle, gfp_t gfp)
 {
 	void *ret;
-	struct dma_coherent_mem *mem = dev ? dev->dma_mem : NULL;
 	int order = get_order(size);
 	/* ignore region specifiers */
 	gfp &= ~(__GFP_DMA | __GFP_HIGHMEM);
 
-	if (mem) {
-		int page = bitmap_find_free_region(mem->bitmap, mem->size,
-						     order);
-		if (page >= 0) {
-			*dma_handle = mem->device_base + (page << PAGE_SHIFT);
-			ret = mem->virt_base + (page << PAGE_SHIFT);
-			memset(ret, 0, size);
-			return ret;
-		}
-		if (mem->flags & DMA_MEMORY_EXCLUSIVE)
-			return NULL;
-	}
+	if (dma_alloc_from_coherent(dev, size, dma_handle, &ret))
+		return ret;
 
 	if (dev == NULL || (dev->coherent_dma_mask < 0xffffffff))
 		gfp |= GFP_DMA;
@@ -60,90 +41,9 @@ void *dma_alloc_coherent(struct device *dev, size_t size,
 void dma_free_coherent(struct device *dev, size_t size,
 			 void *vaddr, dma_addr_t dma_handle)
 {
-	struct dma_coherent_mem *mem = dev ? dev->dma_mem : NULL;
 	int order = get_order(size);
 
-	if (mem && vaddr >= mem->virt_base && vaddr < (mem->virt_base + (mem->size << PAGE_SHIFT))) {
-		int page = (vaddr - mem->virt_base) >> PAGE_SHIFT;
-
-		bitmap_release_region(mem->bitmap, page, order);
-	} else
+	if (!dma_release_from_coherent(dev, order, vaddr))
 		free_pages((unsigned long)vaddr, order);
 }
 
-int dma_declare_coherent_memory(struct device *dev, dma_addr_t bus_addr,
-				dma_addr_t device_addr, size_t size, int flags)
-{
-	void __iomem *mem_base;
-	int pages = size >> PAGE_SHIFT;
-	int bitmap_size = BITS_TO_LONGS(pages) * sizeof(long);
-
-	if ((flags & (DMA_MEMORY_MAP | DMA_MEMORY_IO)) == 0)
-		goto out;
-	if (!size)
-		goto out;
-	if (dev->dma_mem)
-		goto out;
-
-	/* FIXME: this routine just ignores DMA_MEMORY_INCLUDES_CHILDREN */
-
-	mem_base = ioremap(bus_addr, size);
-	if (!mem_base)
-		goto out;
-
-	dev->dma_mem = kzalloc(sizeof(struct dma_coherent_mem), GFP_KERNEL);
-	if (!dev->dma_mem)
-		goto iounmap_out;
-	dev->dma_mem->bitmap = kzalloc(bitmap_size, GFP_KERNEL);
-	if (!dev->dma_mem->bitmap)
-		goto free1_out;
-
-	dev->dma_mem->virt_base = mem_base;
-	dev->dma_mem->device_base = device_addr;
-	dev->dma_mem->size = pages;
-	dev->dma_mem->flags = flags;
-
-	if (flags & DMA_MEMORY_MAP)
-		return DMA_MEMORY_MAP;
-
-	return DMA_MEMORY_IO;
-
- free1_out:
-	kfree(dev->dma_mem);
- iounmap_out:
-	iounmap(mem_base);
- out:
-	return 0;
-}
-EXPORT_SYMBOL(dma_declare_coherent_memory);
-
-void dma_release_declared_memory(struct device *dev)
-{
-	struct dma_coherent_mem *mem = dev->dma_mem;
-
-	if(!mem)
-		return;
-	dev->dma_mem = NULL;
-	iounmap(mem->virt_base);
-	kfree(mem->bitmap);
-	kfree(mem);
-}
-EXPORT_SYMBOL(dma_release_declared_memory);
-
-void *dma_mark_declared_memory_occupied(struct device *dev,
-					dma_addr_t device_addr, size_t size)
-{
-	struct dma_coherent_mem *mem = dev->dma_mem;
-	int pages = (size + (device_addr & ~PAGE_MASK) + PAGE_SIZE - 1) >> PAGE_SHIFT;
-	int pos, err;
-
-	if (!mem)
-		return ERR_PTR(-EINVAL);
-
-	pos = (device_addr - mem->device_base) >> PAGE_SHIFT;
-	err = bitmap_allocate_region(mem->bitmap, pos, get_order(pages));
-	if (err != 0)
-		return ERR_PTR(err);
-	return mem->virt_base + (pos << PAGE_SHIFT);
-}
-EXPORT_SYMBOL(dma_mark_declared_memory_occupied);
diff --git a/arch/cris/arch-v32/kernel/fasttimer.c b/arch/cris/arch-v32/kernel/fasttimer.c
index 2de9d5849ef0..111caa1a2efb 100644
--- a/arch/cris/arch-v32/kernel/fasttimer.c
+++ b/arch/cris/arch-v32/kernel/fasttimer.c
@@ -19,8 +19,6 @@
 #include <asm/irq.h>
 #include <asm/system.h>
 
-#include <linux/version.h>
-
 #include <hwregs/reg_map.h>
 #include <hwregs/reg_rdwr.h>
 #include <hwregs/timer_defs.h>
diff --git a/arch/cris/arch-v32/kernel/kgdb.c b/arch/cris/arch-v32/kernel/kgdb.c
index 4e2e2e271efb..8bd5a5bc0dc7 100644
--- a/arch/cris/arch-v32/kernel/kgdb.c
+++ b/arch/cris/arch-v32/kernel/kgdb.c
@@ -398,14 +398,6 @@ void putDebugChar(int val)
 }
 #endif
 
-/* Returns the character equivalent of a nibble, bit 7, 6, 5, and 4 of a byte,
-   represented by int x. */
-static char highhex(int x);
-
-/* Returns the character equivalent of a nibble, bit 3, 2, 1, and 0 of a byte,
-   represented by int x. */
-static char lowhex(int x);
-
 /* Returns the integer equivalent of a hexadecimal character. */
 static int hex(char ch);
 
@@ -464,9 +456,6 @@ void breakpoint(void);
 /* Run-length encoding maximum length. Send 64 at most. */
 #define RUNLENMAX 64
 
-/* Definition of all valid hexadecimal characters */
-static const char hexchars[] = "0123456789abcdef";
-
 /* The inbound/outbound buffers used in packet I/O */
 static char input_buffer[BUFMAX];
 static char output_buffer[BUFMAX];
@@ -550,8 +539,8 @@ gdb_cris_strtol(const char *s, char **endptr, int base)
 	char *sd;
 	int x = 0;
 
-	for (s1 = (char*)s; (sd = gdb_cris_memchr(hexchars, *s1, base)) != NULL; ++s1)
-		x = x * base + (sd - hexchars);
+	for (s1 = (char*)s; (sd = gdb_cris_memchr(hex_asc, *s1, base)) != NULL; ++s1)
+		x = x * base + (sd - hex_asc);
 
         if (endptr) {
                 /* Unconverted suffix is stored in endptr unless endptr is NULL. */
@@ -655,22 +644,6 @@ read_register(char regno, unsigned int *valptr)
 }
 
 /********************************** Packet I/O ******************************/
-/* Returns the character equivalent of a nibble, bit 7, 6, 5, and 4 of a byte,
-   represented by int x. */
-static inline char
-highhex(int x)
-{
-	return hexchars[(x >> 4) & 0xf];
-}
-
-/* Returns the character equivalent of a nibble, bit 3, 2, 1, and 0 of a byte,
-   represented by int x. */
-static inline char
-lowhex(int x)
-{
-	return hexchars[x & 0xf];
-}
-
 /* Returns the integer equivalent of a hexadecimal character. */
 static int
 hex(char ch)
@@ -704,8 +677,7 @@ mem2hex(char *buf, unsigned char *mem, int count)
                 /* Valid mem address. */
 		for (i = 0; i < count; i++) {
 			ch = *mem++;
-			*buf++ = highhex (ch);
-			*buf++ = lowhex (ch);
+			buf = pack_hex_byte(buf, ch);
 		}
         }
         /* Terminate properly. */
@@ -723,8 +695,7 @@ mem2hex_nbo(char *buf, unsigned char *mem, int count)
 	mem += count - 1;
 	for (i = 0; i < count; i++) {
 		ch = *mem--;
-		*buf++ = highhex (ch);
-		*buf++ = lowhex (ch);
+		buf = pack_hex_byte(buf, ch);
         }
 
         /* Terminate properly. */
@@ -862,8 +833,8 @@ putpacket(char *buffer)
 			}
 		}
 		putDebugChar('#');
-		putDebugChar(highhex (checksum));
-		putDebugChar(lowhex (checksum));
+		putDebugChar(hex_asc_hi(checksum));
+		putDebugChar(hex_asc_lo(checksum));
 	} while(kgdb_started && (getDebugChar() != '+'));
 }
 
@@ -909,8 +880,7 @@ stub_is_stopped(int sigval)
 	/* Send trap type (converted to signal) */
 
 	*ptr++ = 'T';
-	*ptr++ = highhex(sigval);
-	*ptr++ = lowhex(sigval);
+	ptr = pack_hex_byte(ptr, sigval);
 
 	if (((reg.exs & 0xff00) >> 8) == 0xc) {
 
@@ -1018,30 +988,26 @@ stub_is_stopped(int sigval)
 	}
 	/* Only send PC, frame and stack pointer. */
 	read_register(PC, &reg_cont);
-	*ptr++ = highhex(PC);
-	*ptr++ = lowhex(PC);
+	ptr = pack_hex_byte(PC);
 	*ptr++ = ':';
 	ptr = mem2hex(ptr, (unsigned char *)&reg_cont, register_size[PC]);
 	*ptr++ = ';';
 
 	read_register(R8, &reg_cont);
-	*ptr++ = highhex(R8);
-	*ptr++ = lowhex(R8);
+	ptr = pack_hex_byte(R8);
 	*ptr++ = ':';
 	ptr = mem2hex(ptr, (unsigned char *)&reg_cont, register_size[R8]);
 	*ptr++ = ';';
 
 	read_register(SP, &reg_cont);
-	*ptr++ = highhex(SP);
-	*ptr++ = lowhex(SP);
+	ptr = pack_hex_byte(SP);
 	*ptr++ = ':';
 	ptr = mem2hex(ptr, (unsigned char *)&reg_cont, register_size[SP]);
 	*ptr++ = ';';
 
 	/* Send ERP as well; this will save us an entire register fetch in some cases. */
         read_register(ERP, &reg_cont);
-        *ptr++ = highhex(ERP);
-        *ptr++ = lowhex(ERP);
+	ptr = pack_hex_byte(ERP);
         *ptr++ = ':';
         ptr = mem2hex(ptr, (unsigned char *)&reg_cont, register_size[ERP]);
         *ptr++ = ';';
@@ -1533,8 +1499,8 @@ handle_exception(int sigval)
 				   Success: SAA, where AA is the signal number.
 				   Failure: void. */
 				output_buffer[0] = 'S';
-				output_buffer[1] = highhex(sigval);
-				output_buffer[2] = lowhex(sigval);
+				output_buffer[1] = hex_asc_hi(sigval);
+				output_buffer[2] = hex_asc_lo(sigval);
 				output_buffer[3] = 0;
 				break;
 
diff --git a/arch/cris/mm/init.c b/arch/cris/mm/init.c
index 5b06ffa15e34..2fdd212eb250 100644
--- a/arch/cris/mm/init.c
+++ b/arch/cris/mm/init.c
@@ -19,36 +19,6 @@ unsigned long empty_zero_page;
 extern char _stext, _edata, _etext; /* From linkerscript */
 extern char __init_begin, __init_end;
 
-void 
-show_mem(void)
-{
-	int i,free = 0,total = 0,cached = 0, reserved = 0, nonshared = 0;
-	int shared = 0;
-
-	printk("\nMem-info:\n");
-	show_free_areas();
-	i = max_mapnr;
-	while (i-- > 0) {
-		total++;
-		if (PageReserved(mem_map+i))
-			reserved++;
-		else if (PageSwapCache(mem_map+i))
-			cached++;
-		else if (!page_count(mem_map+i))
-			free++;
-		else if (page_count(mem_map+i) == 1)
-			nonshared++;
-		else
-			shared += page_count(mem_map+i) - 1;
-	}
-	printk("%d pages of RAM\n",total);
-	printk("%d free pages\n",free);
-	printk("%d reserved pages\n",reserved);
-	printk("%d pages nonshared\n",nonshared);
-	printk("%d pages shared\n",shared);
-	printk("%d pages swap cached\n",cached);
-}
-
 void __init
 mem_init(void)
 {
diff --git a/arch/frv/kernel/entry.S b/arch/frv/kernel/entry.S
index b8a4b94779b1..99060ab507ee 100644
--- a/arch/frv/kernel/entry.S
+++ b/arch/frv/kernel/entry.S
@@ -1519,6 +1519,11 @@ sys_call_table:
 	.long sys_fallocate
 	.long sys_timerfd_settime	/* 325 */
 	.long sys_timerfd_gettime
-
+	.long sys_signalfd4
+	.long sys_eventfd2
+	.long sys_epoll_create1
+	.long sys_dup3			/* 330 */
+	.long sys_pipe2
+	.long sys_inotify_init1
 
 syscall_table_size = (. - sys_call_table)
diff --git a/arch/frv/kernel/gdb-stub.c b/arch/frv/kernel/gdb-stub.c
index 48a0393e7cee..7ca8a6b19ac9 100644
--- a/arch/frv/kernel/gdb-stub.c
+++ b/arch/frv/kernel/gdb-stub.c
@@ -182,8 +182,6 @@ extern volatile u32 __attribute__((section(".bss"))) gdbstub_trace_through_excep
 static char	input_buffer[BUFMAX];
 static char	output_buffer[BUFMAX];
 
-static const char hexchars[] = "0123456789abcdef";
-
 static const char *regnames[] = {
 	"PSR ", "ISR ", "CCR ", "CCCR",
 	"LR  ", "LCR ", "PC  ", "_stt",
@@ -383,8 +381,8 @@ static int gdbstub_send_packet(char *buffer)
 		}
 
 		gdbstub_tx_char('#');
-		gdbstub_tx_char(hexchars[checksum >> 4]);
-		gdbstub_tx_char(hexchars[checksum & 0xf]);
+		gdbstub_tx_char(hex_asc_hi(checksum));
+		gdbstub_tx_char(hex_asc_lo(checksum));
 
 	} while (gdbstub_rx_char(&ch,0),
 #ifdef GDBSTUB_DEBUG_PROTOCOL
@@ -674,8 +672,7 @@ static unsigned char *mem2hex(const void *_mem, char *buf, int count, int may_fa
 	if ((uint32_t)mem&1 && count>=1) {
 		if (!gdbstub_read_byte(mem,ch))
 			return NULL;
-		*buf++ = hexchars[ch[0] >> 4];
-		*buf++ = hexchars[ch[0] & 0xf];
+		buf = pack_hex_byte(buf, ch[0]);
 		mem++;
 		count--;
 	}
@@ -683,10 +680,8 @@ static unsigned char *mem2hex(const void *_mem, char *buf, int count, int may_fa
 	if ((uint32_t)mem&3 && count>=2) {
 		if (!gdbstub_read_word(mem,(uint16_t *)ch))
 			return NULL;
-		*buf++ = hexchars[ch[0] >> 4];
-		*buf++ = hexchars[ch[0] & 0xf];
-		*buf++ = hexchars[ch[1] >> 4];
-		*buf++ = hexchars[ch[1] & 0xf];
+		buf = pack_hex_byte(buf, ch[0]);
+		buf = pack_hex_byte(buf, ch[1]);
 		mem += 2;
 		count -= 2;
 	}
@@ -694,14 +689,10 @@ static unsigned char *mem2hex(const void *_mem, char *buf, int count, int may_fa
 	while (count>=4) {
 		if (!gdbstub_read_dword(mem,(uint32_t *)ch))
 			return NULL;
-		*buf++ = hexchars[ch[0] >> 4];
-		*buf++ = hexchars[ch[0] & 0xf];
-		*buf++ = hexchars[ch[1] >> 4];
-		*buf++ = hexchars[ch[1] & 0xf];
-		*buf++ = hexchars[ch[2] >> 4];
-		*buf++ = hexchars[ch[2] & 0xf];
-		*buf++ = hexchars[ch[3] >> 4];
-		*buf++ = hexchars[ch[3] & 0xf];
+		buf = pack_hex_byte(buf, ch[0]);
+		buf = pack_hex_byte(buf, ch[1]);
+		buf = pack_hex_byte(buf, ch[2]);
+		buf = pack_hex_byte(buf, ch[3]);
 		mem += 4;
 		count -= 4;
 	}
@@ -709,10 +700,8 @@ static unsigned char *mem2hex(const void *_mem, char *buf, int count, int may_fa
 	if (count>=2) {
 		if (!gdbstub_read_word(mem,(uint16_t *)ch))
 			return NULL;
-		*buf++ = hexchars[ch[0] >> 4];
-		*buf++ = hexchars[ch[0] & 0xf];
-		*buf++ = hexchars[ch[1] >> 4];
-		*buf++ = hexchars[ch[1] & 0xf];
+		buf = pack_hex_byte(buf, ch[0]);
+		buf = pack_hex_byte(buf, ch[1]);
 		mem += 2;
 		count -= 2;
 	}
@@ -720,8 +709,7 @@ static unsigned char *mem2hex(const void *_mem, char *buf, int count, int may_fa
 	if (count>=1) {
 		if (!gdbstub_read_byte(mem,ch))
 			return NULL;
-		*buf++ = hexchars[ch[0] >> 4];
-		*buf++ = hexchars[ch[0] & 0xf];
+		buf = pack_hex_byte(buf, ch[0]);
 	}
 
 	*buf = 0;
@@ -1471,22 +1459,22 @@ void gdbstub(int sigval)
 		*ptr++ = 'O';
 		ptr = mem2hex(title, ptr, sizeof(title) - 1,0);
 
-		hx = hexchars[(brr & 0xf0000000) >> 28];
-		*ptr++ = hexchars[hx >> 4];	*ptr++ = hexchars[hx & 0xf];
-		hx = hexchars[(brr & 0x0f000000) >> 24];
-		*ptr++ = hexchars[hx >> 4];	*ptr++ = hexchars[hx & 0xf];
-		hx = hexchars[(brr & 0x00f00000) >> 20];
-		*ptr++ = hexchars[hx >> 4];	*ptr++ = hexchars[hx & 0xf];
-		hx = hexchars[(brr & 0x000f0000) >> 16];
-		*ptr++ = hexchars[hx >> 4];	*ptr++ = hexchars[hx & 0xf];
-		hx = hexchars[(brr & 0x0000f000) >> 12];
-		*ptr++ = hexchars[hx >> 4];	*ptr++ = hexchars[hx & 0xf];
-		hx = hexchars[(brr & 0x00000f00) >> 8];
-		*ptr++ = hexchars[hx >> 4];	*ptr++ = hexchars[hx & 0xf];
-		hx = hexchars[(brr & 0x000000f0) >> 4];
-		*ptr++ = hexchars[hx >> 4];	*ptr++ = hexchars[hx & 0xf];
-		hx = hexchars[(brr & 0x0000000f)];
-		*ptr++ = hexchars[hx >> 4];	*ptr++ = hexchars[hx & 0xf];
+		hx = hex_asc_hi(brr >> 24);
+		ptr = pack_hex_byte(ptr, hx);
+		hx = hex_asc_lo(brr >> 24);
+		ptr = pack_hex_byte(ptr, hx);
+		hx = hex_asc_hi(brr >> 16);
+		ptr = pack_hex_byte(ptr, hx);
+		hx = hex_asc_lo(brr >> 16);
+		ptr = pack_hex_byte(ptr, hx);
+		hx = hex_asc_hi(brr >> 8);
+		ptr = pack_hex_byte(ptr, hx);
+		hx = hex_asc_lo(brr >> 8);
+		ptr = pack_hex_byte(ptr, hx);
+		hx = hex_asc_hi(brr);
+		ptr = pack_hex_byte(ptr, hx);
+		hx = hex_asc_lo(brr);
+		ptr = pack_hex_byte(ptr, hx);
 
 		ptr = mem2hex(crlf, ptr, sizeof(crlf) - 1, 0);
 		*ptr = 0;
@@ -1500,12 +1488,10 @@ void gdbstub(int sigval)
 
 	/* Send trap type (converted to signal) */
 	*ptr++ = 'T';
-	*ptr++ = hexchars[sigval >> 4];
-	*ptr++ = hexchars[sigval & 0xf];
+	ptr = pack_hex_byte(ptr, sigval);
 
 	/* Send Error PC */
-	*ptr++ = hexchars[GDB_REG_PC >> 4];
-	*ptr++ = hexchars[GDB_REG_PC & 0xf];
+	ptr = pack_hex_byte(ptr, GDB_REG_PC);
 	*ptr++ = ':';
 	ptr = mem2hex(&__debug_frame->pc, ptr, 4, 0);
 	*ptr++ = ';';
@@ -1513,8 +1499,7 @@ void gdbstub(int sigval)
 	/*
 	 * Send frame pointer
 	 */
-	*ptr++ = hexchars[GDB_REG_FP >> 4];
-	*ptr++ = hexchars[GDB_REG_FP & 0xf];
+	ptr = pack_hex_byte(ptr, GDB_REG_FP);
 	*ptr++ = ':';
 	ptr = mem2hex(&__debug_frame->fp, ptr, 4, 0);
 	*ptr++ = ';';
@@ -1522,8 +1507,7 @@ void gdbstub(int sigval)
 	/*
 	 * Send stack pointer
 	 */
-	*ptr++ = hexchars[GDB_REG_SP >> 4];
-	*ptr++ = hexchars[GDB_REG_SP & 0xf];
+	ptr = pack_hex_byte(ptr, GDB_REG_SP);
 	*ptr++ = ':';
 	ptr = mem2hex(&__debug_frame->sp, ptr, 4, 0);
 	*ptr++ = ';';
@@ -1548,8 +1532,8 @@ void gdbstub(int sigval)
 			/* request repeat of last signal number */
 		case '?':
 			output_buffer[0] = 'S';
-			output_buffer[1] = hexchars[sigval >> 4];
-			output_buffer[2] = hexchars[sigval & 0xf];
+			output_buffer[1] = hex_asc_hi(sigval);
+			output_buffer[2] = hex_asc_lo(sigval);
 			output_buffer[3] = 0;
 			break;
 
@@ -2059,8 +2043,8 @@ void gdbstub_exit(int status)
 	}
 
 	gdbstub_tx_char('#');
-	gdbstub_tx_char(hexchars[checksum >> 4]);
-	gdbstub_tx_char(hexchars[checksum & 0xf]);
+	gdbstub_tx_char(hex_asc_hi(checksum));
+	gdbstub_tx_char(hex_asc_lo(checksum));
 
 	/* make sure the output is flushed, or else RedBoot might clobber it */
 	gdbstub_tx_char('-');
diff --git a/arch/frv/mm/init.c b/arch/frv/mm/init.c
index 9af7740f32fb..1b851db34186 100644
--- a/arch/frv/mm/init.c
+++ b/arch/frv/mm/init.c
@@ -63,37 +63,6 @@ EXPORT_SYMBOL(empty_zero_page);
 
 /*****************************************************************************/
 /*
- *
- */
-void show_mem(void)
-{
-	unsigned long i;
-	int free = 0, total = 0, reserved = 0, shared = 0;
-
-	printk("\nMem-info:\n");
-	show_free_areas();
-	i = max_mapnr;
-	while (i-- > 0) {
-		struct page *page = &mem_map[i];
-
-		total++;
-		if (PageReserved(page))
-			reserved++;
-		else if (!page_count(page))
-			free++;
-		else
-			shared += page_count(page) - 1;
-	}
-
-	printk("%d pages of RAM\n",total);
-	printk("%d free pages\n",free);
-	printk("%d reserved pages\n",reserved);
-	printk("%d pages shared\n",shared);
-
-} /* end show_mem() */
-
-/*****************************************************************************/
-/*
  * paging_init() continues the virtual memory environment setup which
  * was begun by the code in arch/head.S.
  * The parameters are pointers to where to stick the starting and ending
diff --git a/arch/h8300/Kconfig b/arch/h8300/Kconfig
index 085dc6ec152b..396ab059efa3 100644
--- a/arch/h8300/Kconfig
+++ b/arch/h8300/Kconfig
@@ -203,20 +203,6 @@ config UNIX98_PTYS
 	  Read the instructions in <file:Documentation/Changes> pertaining to
 	  pseudo terminals. It's safe to say N.
 
-config UNIX98_PTY_COUNT
-	int "Maximum number of Unix98 PTYs in use (0-2048)"
-	depends on UNIX98_PTYS
-	default "256"
-	help
-	  The maximum number of Unix98 PTYs that can be used at any one time.
-	  The default is 256, and should be enough for desktop systems. Server
-	  machines which support incoming telnet/rlogin/ssh connections and/or
-	  serve several X terminals may want to increase this: every incoming
-	  connection and every xterm uses up one PTY.
-
-	  When not in use, each additional set of 256 PTYs occupy
-	  approximately 8 KB of kernel memory on 32-bit architectures.
-
 source "drivers/char/pcmcia/Kconfig"
 
 source "drivers/serial/Kconfig"
diff --git a/arch/h8300/boot/compressed/misc.c b/arch/h8300/boot/compressed/misc.c
index 845074588af0..51ab6cbd030f 100644
--- a/arch/h8300/boot/compressed/misc.c
+++ b/arch/h8300/boot/compressed/misc.c
@@ -67,8 +67,6 @@ static unsigned outcnt = 0;  /* bytes in output buffer */
 static int  fill_inbuf(void);
 static void flush_window(void);
 static void error(char *m);
-static void gzip_mark(void **);
-static void gzip_release(void **);
 
 extern char input_data[];
 extern int input_len;
@@ -77,11 +75,7 @@ static long bytes_out = 0;
 static uch *output_data;
 static unsigned long output_ptr = 0;
 
-static void *malloc(int size);
-static void free(void *where);
 static void error(char *m);
-static void gzip_mark(void **);
-static void gzip_release(void **);
 
 int puts(const char *);
 
@@ -98,38 +92,6 @@ static unsigned long free_mem_end_ptr;
 #define TDR *((volatile unsigned char *)0xffff8b)
 #define SSR *((volatile unsigned char *)0xffff8c)
 
-static void *malloc(int size)
-{
-	void *p;
-
-	if (size <0) error("Malloc error");
-	if (free_mem_ptr == 0) error("Memory error");
-
-	free_mem_ptr = (free_mem_ptr + 3) & ~3;	/* Align */
-
-	p = (void *)free_mem_ptr;
-	free_mem_ptr += size;
-
-	if (free_mem_ptr >= free_mem_end_ptr)
-		error("Out of memory");
-
-	return p;
-}
-
-static void free(void *where)
-{	/* Don't care */
-}
-
-static void gzip_mark(void **ptr)
-{
-	*ptr = (void *) free_mem_ptr;
-}
-
-static void gzip_release(void **ptr)
-{
-	free_mem_ptr = (long) *ptr;
-}
-
 int puts(const char *s)
 {
 	return 0;
diff --git a/include/asm-h8300/Kbuild b/arch/h8300/include/asm/Kbuild
index c68e1680da01..c68e1680da01 100644
--- a/include/asm-h8300/Kbuild
+++ b/arch/h8300/include/asm/Kbuild
diff --git a/include/asm-h8300/a.out.h b/arch/h8300/include/asm/a.out.h
index ded780f0a492..ded780f0a492 100644
--- a/include/asm-h8300/a.out.h
+++ b/arch/h8300/include/asm/a.out.h
diff --git a/include/asm-h8300/atomic.h b/arch/h8300/include/asm/atomic.h
index b4cf0ea97ede..b4cf0ea97ede 100644
--- a/include/asm-h8300/atomic.h
+++ b/arch/h8300/include/asm/atomic.h
diff --git a/include/asm-h8300/auxvec.h b/arch/h8300/include/asm/auxvec.h
index 1d36fe38b088..1d36fe38b088 100644
--- a/include/asm-h8300/auxvec.h
+++ b/arch/h8300/include/asm/auxvec.h
diff --git a/include/asm-h8300/bitops.h b/arch/h8300/include/asm/bitops.h
index cb18e3b0aa94..cb18e3b0aa94 100644
--- a/include/asm-h8300/bitops.h
+++ b/arch/h8300/include/asm/bitops.h
diff --git a/include/asm-h8300/bootinfo.h b/arch/h8300/include/asm/bootinfo.h
index 5bed7e7aac0a..5bed7e7aac0a 100644
--- a/include/asm-h8300/bootinfo.h
+++ b/arch/h8300/include/asm/bootinfo.h
diff --git a/include/asm-h8300/bug.h b/arch/h8300/include/asm/bug.h
index edddf5b086e5..edddf5b086e5 100644
--- a/include/asm-h8300/bug.h
+++ b/arch/h8300/include/asm/bug.h
diff --git a/include/asm-h8300/bugs.h b/arch/h8300/include/asm/bugs.h
index 1cb4afba6eb1..1cb4afba6eb1 100644
--- a/include/asm-h8300/bugs.h
+++ b/arch/h8300/include/asm/bugs.h
diff --git a/include/asm-h8300/byteorder.h b/arch/h8300/include/asm/byteorder.h
index 36e597d61619..36e597d61619 100644
--- a/include/asm-h8300/byteorder.h
+++ b/arch/h8300/include/asm/byteorder.h
diff --git a/include/asm-h8300/cache.h b/arch/h8300/include/asm/cache.h
index c6350283649d..c6350283649d 100644
--- a/include/asm-h8300/cache.h
+++ b/arch/h8300/include/asm/cache.h
diff --git a/include/asm-h8300/cachectl.h b/arch/h8300/include/asm/cachectl.h
index c464022d8e26..c464022d8e26 100644
--- a/include/asm-h8300/cachectl.h
+++ b/arch/h8300/include/asm/cachectl.h
diff --git a/include/asm-h8300/cacheflush.h b/arch/h8300/include/asm/cacheflush.h
index 5ffdca217b95..5ffdca217b95 100644
--- a/include/asm-h8300/cacheflush.h
+++ b/arch/h8300/include/asm/cacheflush.h
diff --git a/include/asm-h8300/checksum.h b/arch/h8300/include/asm/checksum.h
index 98724e12508c..98724e12508c 100644
--- a/include/asm-h8300/checksum.h
+++ b/arch/h8300/include/asm/checksum.h
diff --git a/include/asm-h8300/cputime.h b/arch/h8300/include/asm/cputime.h
index 092e187c7b08..092e187c7b08 100644
--- a/include/asm-h8300/cputime.h
+++ b/arch/h8300/include/asm/cputime.h
diff --git a/include/asm-h8300/current.h b/arch/h8300/include/asm/current.h
index 57d74ee55a14..57d74ee55a14 100644
--- a/include/asm-h8300/current.h
+++ b/arch/h8300/include/asm/current.h
diff --git a/include/asm-h8300/dbg.h b/arch/h8300/include/asm/dbg.h
index 2c6d1cbcf736..2c6d1cbcf736 100644
--- a/include/asm-h8300/dbg.h
+++ b/arch/h8300/include/asm/dbg.h
diff --git a/include/asm-h8300/delay.h b/arch/h8300/include/asm/delay.h
index 743beba70f82..743beba70f82 100644
--- a/include/asm-h8300/delay.h
+++ b/arch/h8300/include/asm/delay.h
diff --git a/include/asm-h8300/device.h b/arch/h8300/include/asm/device.h
index d8f9872b0e2d..d8f9872b0e2d 100644
--- a/include/asm-h8300/device.h
+++ b/arch/h8300/include/asm/device.h
diff --git a/include/asm-h8300/div64.h b/arch/h8300/include/asm/div64.h
index 6cd978cefb28..6cd978cefb28 100644
--- a/include/asm-h8300/div64.h
+++ b/arch/h8300/include/asm/div64.h
diff --git a/include/asm-h8300/dma.h b/arch/h8300/include/asm/dma.h
index 3edbaaaedf5b..3edbaaaedf5b 100644
--- a/include/asm-h8300/dma.h
+++ b/arch/h8300/include/asm/dma.h
diff --git a/arch/h8300/include/asm/elf.h b/arch/h8300/include/asm/elf.h
new file mode 100644
index 000000000000..a8b57d1f4128
--- /dev/null
+++ b/arch/h8300/include/asm/elf.h
@@ -0,0 +1,104 @@
+#ifndef __ASMH8300_ELF_H
+#define __ASMH8300_ELF_H
+
+/*
+ * ELF register definitions..
+ */
+
+#include <asm/ptrace.h>
+#include <asm/user.h>
+
+typedef unsigned long elf_greg_t;
+
+#define ELF_NGREG (sizeof(struct user_regs_struct) / sizeof(elf_greg_t))
+typedef elf_greg_t elf_gregset_t[ELF_NGREG];
+typedef unsigned long elf_fpregset_t;
+
+/*
+ * This is used to ensure we don't load something for the wrong architecture.
+ */
+#define elf_check_arch(x) ((x)->e_machine == EM_H8_300)
+
+/*
+ * These are used to set parameters in the core dumps.
+ */
+#define ELF_CLASS	ELFCLASS32
+#define ELF_DATA	ELFDATA2MSB
+#define ELF_ARCH	EM_H8_300
+#if defined(__H8300H__)
+#define ELF_CORE_EFLAGS 0x810000
+#endif
+#if defined(__H8300S__)
+#define ELF_CORE_EFLAGS 0x820000
+#endif
+
+#define ELF_PLAT_INIT(_r)	_r->er1 = 0
+
+#define USE_ELF_CORE_DUMP
+#define ELF_EXEC_PAGESIZE	4096
+
+/* This is the location that an ET_DYN program is loaded if exec'ed.  Typical
+   use of this is to invoke "./ld.so someprog" to test out a new version of
+   the loader.  We need to make sure that it is out of the way of the program
+   that it will "exec", and that there is sufficient room for the brk.  */
+
+#define ELF_ET_DYN_BASE         0xD0000000UL
+
+/* This yields a mask that user programs can use to figure out what
+   instruction set this cpu supports.  */
+
+#define ELF_HWCAP	(0)
+
+/* This yields a string that ld.so will use to load implementation
+   specific libraries for optimization.  This is more specific in
+   intent than poking at uname or /proc/cpuinfo.  */
+
+#define ELF_PLATFORM  (NULL)
+
+#define SET_PERSONALITY(ex, ibcs2) set_personality(PER_LINUX)
+
+#define R_H8_NONE       0
+#define R_H8_DIR32      1
+#define R_H8_DIR32_28   2
+#define R_H8_DIR32_24   3
+#define R_H8_DIR32_16   4
+#define R_H8_DIR32U     6
+#define R_H8_DIR32U_28  7
+#define R_H8_DIR32U_24  8
+#define R_H8_DIR32U_20  9
+#define R_H8_DIR32U_16 10
+#define R_H8_DIR24     11
+#define R_H8_DIR24_20  12
+#define R_H8_DIR24_16  13
+#define R_H8_DIR24U    14
+#define R_H8_DIR24U_20 15
+#define R_H8_DIR24U_16 16
+#define R_H8_DIR16     17
+#define R_H8_DIR16U    18
+#define R_H8_DIR16S_32 19
+#define R_H8_DIR16S_28 20
+#define R_H8_DIR16S_24 21
+#define R_H8_DIR16S_20 22
+#define R_H8_DIR16S    23
+#define R_H8_DIR8      24
+#define R_H8_DIR8U     25
+#define R_H8_DIR8Z_32  26
+#define R_H8_DIR8Z_28  27
+#define R_H8_DIR8Z_24  28
+#define R_H8_DIR8Z_20  29
+#define R_H8_DIR8Z_16  30
+#define R_H8_PCREL16   31
+#define R_H8_PCREL8    32
+#define R_H8_BPOS      33
+#define R_H8_PCREL32   34
+#define R_H8_GOT32O    35
+#define R_H8_GOT16O    36
+#define R_H8_DIR16A8   59
+#define R_H8_DIR16R8   60
+#define R_H8_DIR24A8   61
+#define R_H8_DIR24R8   62
+#define R_H8_DIR32A16  63
+#define R_H8_ABS32     65
+#define R_H8_ABS32A16 127
+
+#endif
diff --git a/include/asm-h8300/emergency-restart.h b/arch/h8300/include/asm/emergency-restart.h
index 108d8c48e42e..108d8c48e42e 100644
--- a/include/asm-h8300/emergency-restart.h
+++ b/arch/h8300/include/asm/emergency-restart.h
diff --git a/include/asm-h8300/errno.h b/arch/h8300/include/asm/errno.h
index 0c2f5641fdcc..0c2f5641fdcc 100644
--- a/include/asm-h8300/errno.h
+++ b/arch/h8300/include/asm/errno.h
diff --git a/include/asm-h8300/fb.h b/arch/h8300/include/asm/fb.h
index c7df38030992..c7df38030992 100644
--- a/include/asm-h8300/fb.h
+++ b/arch/h8300/include/asm/fb.h
diff --git a/include/asm-h8300/fcntl.h b/arch/h8300/include/asm/fcntl.h
index 1952cb2e3b06..1952cb2e3b06 100644
--- a/include/asm-h8300/fcntl.h
+++ b/arch/h8300/include/asm/fcntl.h
diff --git a/include/asm-h8300/flat.h b/arch/h8300/include/asm/flat.h
index 2a873508a9a1..2a873508a9a1 100644
--- a/include/asm-h8300/flat.h
+++ b/arch/h8300/include/asm/flat.h
diff --git a/include/asm-h8300/fpu.h b/arch/h8300/include/asm/fpu.h
index 4fc416e80bef..4fc416e80bef 100644
--- a/include/asm-h8300/fpu.h
+++ b/arch/h8300/include/asm/fpu.h
diff --git a/include/asm-h8300/futex.h b/arch/h8300/include/asm/futex.h
index 6a332a9f099c..6a332a9f099c 100644
--- a/include/asm-h8300/futex.h
+++ b/arch/h8300/include/asm/futex.h
diff --git a/include/asm-h8300/gpio.h b/arch/h8300/include/asm/gpio.h
index a714f0c0efbc..a714f0c0efbc 100644
--- a/include/asm-h8300/gpio.h
+++ b/arch/h8300/include/asm/gpio.h
diff --git a/include/asm-h8300/hardirq.h b/arch/h8300/include/asm/hardirq.h
index 9d7f7a7462b2..9d7f7a7462b2 100644
--- a/include/asm-h8300/hardirq.h
+++ b/arch/h8300/include/asm/hardirq.h
diff --git a/include/asm-h8300/hw_irq.h b/arch/h8300/include/asm/hw_irq.h
index d75a5a1119e8..d75a5a1119e8 100644
--- a/include/asm-h8300/hw_irq.h
+++ b/arch/h8300/include/asm/hw_irq.h
diff --git a/include/asm-h8300/io.h b/arch/h8300/include/asm/io.h
index 26dc6ccd9441..26dc6ccd9441 100644
--- a/include/asm-h8300/io.h
+++ b/arch/h8300/include/asm/io.h
diff --git a/include/asm-h8300/ioctl.h b/arch/h8300/include/asm/ioctl.h
index b279fe06dfe5..b279fe06dfe5 100644
--- a/include/asm-h8300/ioctl.h
+++ b/arch/h8300/include/asm/ioctl.h
diff --git a/include/asm-h8300/ioctls.h b/arch/h8300/include/asm/ioctls.h
index 98a53d067269..98a53d067269 100644
--- a/include/asm-h8300/ioctls.h
+++ b/arch/h8300/include/asm/ioctls.h
diff --git a/include/asm-h8300/ipcbuf.h b/arch/h8300/include/asm/ipcbuf.h
index 2cd1ebcc109d..2cd1ebcc109d 100644
--- a/include/asm-h8300/ipcbuf.h
+++ b/arch/h8300/include/asm/ipcbuf.h
diff --git a/include/asm-h8300/irq.h b/arch/h8300/include/asm/irq.h
index 13d7c601cd0a..13d7c601cd0a 100644
--- a/include/asm-h8300/irq.h
+++ b/arch/h8300/include/asm/irq.h
diff --git a/include/asm-h8300/irq_regs.h b/arch/h8300/include/asm/irq_regs.h
index 3dd9c0b70270..3dd9c0b70270 100644
--- a/include/asm-h8300/irq_regs.h
+++ b/arch/h8300/include/asm/irq_regs.h
diff --git a/include/asm-h8300/kdebug.h b/arch/h8300/include/asm/kdebug.h
index 6ece1b037665..6ece1b037665 100644
--- a/include/asm-h8300/kdebug.h
+++ b/arch/h8300/include/asm/kdebug.h
diff --git a/include/asm-h8300/kmap_types.h b/arch/h8300/include/asm/kmap_types.h
index 1ec8a3427120..1ec8a3427120 100644
--- a/include/asm-h8300/kmap_types.h
+++ b/arch/h8300/include/asm/kmap_types.h
diff --git a/include/asm-h8300/linkage.h b/arch/h8300/include/asm/linkage.h
index 6f4df7d46180..6f4df7d46180 100644
--- a/include/asm-h8300/linkage.h
+++ b/arch/h8300/include/asm/linkage.h
diff --git a/include/asm-h8300/local.h b/arch/h8300/include/asm/local.h
index fdd4efe437cd..fdd4efe437cd 100644
--- a/include/asm-h8300/local.h
+++ b/arch/h8300/include/asm/local.h
diff --git a/include/asm-h8300/mc146818rtc.h b/arch/h8300/include/asm/mc146818rtc.h
index ab9d9646d241..ab9d9646d241 100644
--- a/include/asm-h8300/mc146818rtc.h
+++ b/arch/h8300/include/asm/mc146818rtc.h
diff --git a/include/asm-h8300/md.h b/arch/h8300/include/asm/md.h
index 1a47dc6691fb..1a47dc6691fb 100644
--- a/include/asm-h8300/md.h
+++ b/arch/h8300/include/asm/md.h
diff --git a/include/asm-h8300/mman.h b/arch/h8300/include/asm/mman.h
index b9f104f22a36..b9f104f22a36 100644
--- a/include/asm-h8300/mman.h
+++ b/arch/h8300/include/asm/mman.h
diff --git a/include/asm-h8300/mmu.h b/arch/h8300/include/asm/mmu.h
index 2ce06ea46104..2ce06ea46104 100644
--- a/include/asm-h8300/mmu.h
+++ b/arch/h8300/include/asm/mmu.h
diff --git a/include/asm-h8300/mmu_context.h b/arch/h8300/include/asm/mmu_context.h
index f44b730da54d..f44b730da54d 100644
--- a/include/asm-h8300/mmu_context.h
+++ b/arch/h8300/include/asm/mmu_context.h
diff --git a/include/asm-h8300/module.h b/arch/h8300/include/asm/module.h
index de23231f3196..de23231f3196 100644
--- a/include/asm-h8300/module.h
+++ b/arch/h8300/include/asm/module.h
diff --git a/include/asm-h8300/msgbuf.h b/arch/h8300/include/asm/msgbuf.h
index 6b148cd09aa5..6b148cd09aa5 100644
--- a/include/asm-h8300/msgbuf.h
+++ b/arch/h8300/include/asm/msgbuf.h
diff --git a/include/asm-h8300/mutex.h b/arch/h8300/include/asm/mutex.h
index 458c1f7fbc18..458c1f7fbc18 100644
--- a/include/asm-h8300/mutex.h
+++ b/arch/h8300/include/asm/mutex.h
diff --git a/include/asm-h8300/page.h b/arch/h8300/include/asm/page.h
index 0b6acf0b03aa..0b6acf0b03aa 100644
--- a/include/asm-h8300/page.h
+++ b/arch/h8300/include/asm/page.h
diff --git a/include/asm-h8300/page_offset.h b/arch/h8300/include/asm/page_offset.h
index f8706463008c..f8706463008c 100644
--- a/include/asm-h8300/page_offset.h
+++ b/arch/h8300/include/asm/page_offset.h
diff --git a/include/asm-h8300/param.h b/arch/h8300/include/asm/param.h
index 1c72fb8080ff..1c72fb8080ff 100644
--- a/include/asm-h8300/param.h
+++ b/arch/h8300/include/asm/param.h
diff --git a/include/asm-h8300/pci.h b/arch/h8300/include/asm/pci.h
index 97389b35aa35..97389b35aa35 100644
--- a/include/asm-h8300/pci.h
+++ b/arch/h8300/include/asm/pci.h
diff --git a/include/asm-h8300/percpu.h b/arch/h8300/include/asm/percpu.h
index 72c03e3666d8..72c03e3666d8 100644
--- a/include/asm-h8300/percpu.h
+++ b/arch/h8300/include/asm/percpu.h
diff --git a/include/asm-h8300/pgalloc.h b/arch/h8300/include/asm/pgalloc.h
index c2e89a286d23..c2e89a286d23 100644
--- a/include/asm-h8300/pgalloc.h
+++ b/arch/h8300/include/asm/pgalloc.h
diff --git a/include/asm-h8300/pgtable.h b/arch/h8300/include/asm/pgtable.h
index a09230a08e02..a09230a08e02 100644
--- a/include/asm-h8300/pgtable.h
+++ b/arch/h8300/include/asm/pgtable.h
diff --git a/include/asm-h8300/poll.h b/arch/h8300/include/asm/poll.h
index f61540c22d94..f61540c22d94 100644
--- a/include/asm-h8300/poll.h
+++ b/arch/h8300/include/asm/poll.h
diff --git a/include/asm-h8300/posix_types.h b/arch/h8300/include/asm/posix_types.h
index 5c553927fc53..5c553927fc53 100644
--- a/include/asm-h8300/posix_types.h
+++ b/arch/h8300/include/asm/posix_types.h
diff --git a/include/asm-h8300/processor.h b/arch/h8300/include/asm/processor.h
index 69e8a34eb6d5..69e8a34eb6d5 100644
--- a/include/asm-h8300/processor.h
+++ b/arch/h8300/include/asm/processor.h
diff --git a/include/asm-h8300/ptrace.h b/arch/h8300/include/asm/ptrace.h
index c2e05e4b512e..c2e05e4b512e 100644
--- a/include/asm-h8300/ptrace.h
+++ b/arch/h8300/include/asm/ptrace.h
diff --git a/include/asm-h8300/regs267x.h b/arch/h8300/include/asm/regs267x.h
index 1bff731a9f77..1bff731a9f77 100644
--- a/include/asm-h8300/regs267x.h
+++ b/arch/h8300/include/asm/regs267x.h
diff --git a/include/asm-h8300/regs306x.h b/arch/h8300/include/asm/regs306x.h
index 027dd633fa25..027dd633fa25 100644
--- a/include/asm-h8300/regs306x.h
+++ b/arch/h8300/include/asm/regs306x.h
diff --git a/include/asm-h8300/resource.h b/arch/h8300/include/asm/resource.h
index 46c5f4391607..46c5f4391607 100644
--- a/include/asm-h8300/resource.h
+++ b/arch/h8300/include/asm/resource.h
diff --git a/include/asm-h8300/scatterlist.h b/arch/h8300/include/asm/scatterlist.h
index d3ecdd87ac90..d3ecdd87ac90 100644
--- a/include/asm-h8300/scatterlist.h
+++ b/arch/h8300/include/asm/scatterlist.h
diff --git a/include/asm-h8300/sections.h b/arch/h8300/include/asm/sections.h
index a81743e8b743..a81743e8b743 100644
--- a/include/asm-h8300/sections.h
+++ b/arch/h8300/include/asm/sections.h
diff --git a/include/asm-h8300/segment.h b/arch/h8300/include/asm/segment.h
index b79a82d0f99d..b79a82d0f99d 100644
--- a/include/asm-h8300/segment.h
+++ b/arch/h8300/include/asm/segment.h
diff --git a/include/asm-h8300/sembuf.h b/arch/h8300/include/asm/sembuf.h
index e04a3ec0cb92..e04a3ec0cb92 100644
--- a/include/asm-h8300/sembuf.h
+++ b/arch/h8300/include/asm/sembuf.h
diff --git a/include/asm-h8300/setup.h b/arch/h8300/include/asm/setup.h
index e2c600e96733..e2c600e96733 100644
--- a/include/asm-h8300/setup.h
+++ b/arch/h8300/include/asm/setup.h
diff --git a/include/asm-h8300/sh_bios.h b/arch/h8300/include/asm/sh_bios.h
index b6bb6e58295c..b6bb6e58295c 100644
--- a/include/asm-h8300/sh_bios.h
+++ b/arch/h8300/include/asm/sh_bios.h
diff --git a/include/asm-h8300/shm.h b/arch/h8300/include/asm/shm.h
index ed6623c0545d..ed6623c0545d 100644
--- a/include/asm-h8300/shm.h
+++ b/arch/h8300/include/asm/shm.h
diff --git a/include/asm-h8300/shmbuf.h b/arch/h8300/include/asm/shmbuf.h
index 64e77993a7a9..64e77993a7a9 100644
--- a/include/asm-h8300/shmbuf.h
+++ b/arch/h8300/include/asm/shmbuf.h
diff --git a/include/asm-h8300/shmparam.h b/arch/h8300/include/asm/shmparam.h
index d1863953ec64..d1863953ec64 100644
--- a/include/asm-h8300/shmparam.h
+++ b/arch/h8300/include/asm/shmparam.h
diff --git a/include/asm-h8300/sigcontext.h b/arch/h8300/include/asm/sigcontext.h
index e4b81505f8f8..e4b81505f8f8 100644
--- a/include/asm-h8300/sigcontext.h
+++ b/arch/h8300/include/asm/sigcontext.h
diff --git a/include/asm-h8300/siginfo.h b/arch/h8300/include/asm/siginfo.h
index bc8fbea931a5..bc8fbea931a5 100644
--- a/include/asm-h8300/siginfo.h
+++ b/arch/h8300/include/asm/siginfo.h
diff --git a/include/asm-h8300/signal.h b/arch/h8300/include/asm/signal.h
index 7bc15048a64f..7bc15048a64f 100644
--- a/include/asm-h8300/signal.h
+++ b/arch/h8300/include/asm/signal.h
diff --git a/include/asm-h8300/smp.h b/arch/h8300/include/asm/smp.h
index 9e9bd7e58922..9e9bd7e58922 100644
--- a/include/asm-h8300/smp.h
+++ b/arch/h8300/include/asm/smp.h
diff --git a/include/asm-h8300/socket.h b/arch/h8300/include/asm/socket.h
index da2520dbf254..da2520dbf254 100644
--- a/include/asm-h8300/socket.h
+++ b/arch/h8300/include/asm/socket.h
diff --git a/include/asm-h8300/sockios.h b/arch/h8300/include/asm/sockios.h
index e9c7ec810c23..e9c7ec810c23 100644
--- a/include/asm-h8300/sockios.h
+++ b/arch/h8300/include/asm/sockios.h
diff --git a/include/asm-h8300/spinlock.h b/arch/h8300/include/asm/spinlock.h
index d5407fa173e4..d5407fa173e4 100644
--- a/include/asm-h8300/spinlock.h
+++ b/arch/h8300/include/asm/spinlock.h
diff --git a/include/asm-h8300/stat.h b/arch/h8300/include/asm/stat.h
index 62c3cc24dfe6..62c3cc24dfe6 100644
--- a/include/asm-h8300/stat.h
+++ b/arch/h8300/include/asm/stat.h
diff --git a/include/asm-h8300/statfs.h b/arch/h8300/include/asm/statfs.h
index b96efa712aac..b96efa712aac 100644
--- a/include/asm-h8300/statfs.h
+++ b/arch/h8300/include/asm/statfs.h
diff --git a/include/asm-h8300/string.h b/arch/h8300/include/asm/string.h
index ca5034897d87..ca5034897d87 100644
--- a/include/asm-h8300/string.h
+++ b/arch/h8300/include/asm/string.h
diff --git a/include/asm-h8300/system.h b/arch/h8300/include/asm/system.h
index 4b8e475908ae..4b8e475908ae 100644
--- a/include/asm-h8300/system.h
+++ b/arch/h8300/include/asm/system.h
diff --git a/include/asm-h8300/target_time.h b/arch/h8300/include/asm/target_time.h
index 9f2a9aa1fe6f..9f2a9aa1fe6f 100644
--- a/include/asm-h8300/target_time.h
+++ b/arch/h8300/include/asm/target_time.h
diff --git a/include/asm-h8300/termbits.h b/arch/h8300/include/asm/termbits.h
index 31eca81db3f7..31eca81db3f7 100644
--- a/include/asm-h8300/termbits.h
+++ b/arch/h8300/include/asm/termbits.h
diff --git a/include/asm-h8300/termios.h b/arch/h8300/include/asm/termios.h
index 70eea64b4213..70eea64b4213 100644
--- a/include/asm-h8300/termios.h
+++ b/arch/h8300/include/asm/termios.h
diff --git a/arch/h8300/include/asm/thread_info.h b/arch/h8300/include/asm/thread_info.h
new file mode 100644
index 000000000000..aafd4d322ec3
--- /dev/null
+++ b/arch/h8300/include/asm/thread_info.h
@@ -0,0 +1,104 @@
+/* thread_info.h: h8300 low-level thread information
+ * adapted from the i386 and PPC versions by Yoshinori Sato <ysato@users.sourceforge.jp>
+ *
+ * Copyright (C) 2002  David Howells (dhowells@redhat.com)
+ * - Incorporating suggestions made by Linus Torvalds and Dave Miller
+ */
+
+#ifndef _ASM_THREAD_INFO_H
+#define _ASM_THREAD_INFO_H
+
+#include <asm/page.h>
+
+#ifdef __KERNEL__
+
+#ifndef __ASSEMBLY__
+
+/*
+ * low level task data.
+ * If you change this, change the TI_* offsets below to match.
+ */
+struct thread_info {
+	struct task_struct *task;		/* main task structure */
+	struct exec_domain *exec_domain;	/* execution domain */
+	unsigned long	   flags;		/* low level flags */
+	int		   cpu;			/* cpu we're on */
+	int		   preempt_count;	/* 0 => preemptable, <0 => BUG */
+	struct restart_block restart_block;
+};
+
+/*
+ * macros/functions for gaining access to the thread information structure
+ */
+#define INIT_THREAD_INFO(tsk)			\
+{						\
+	.task =		&tsk,			\
+	.exec_domain =	&default_exec_domain,	\
+	.flags =	0,			\
+	.cpu =		0,			\
+	.preempt_count = 1,			\
+	.restart_block	= {			\
+		.fn = do_no_restart_syscall,	\
+	},					\
+}
+
+#define init_thread_info	(init_thread_union.thread_info)
+#define init_stack		(init_thread_union.stack)
+
+
+/*
+ * Size of kernel stack for each process. This must be a power of 2...
+ */
+#define THREAD_SIZE_ORDER	1
+#define THREAD_SIZE		8192	/* 2 pages */
+
+
+/* how to get the thread information struct from C */
+static inline struct thread_info *current_thread_info(void)
+{
+	struct thread_info *ti;
+	__asm__(
+		"mov.l	sp, %0 \n\t"
+		"and.l	%1, %0"
+		: "=&r"(ti)
+		: "i" (~(THREAD_SIZE-1))
+		);
+	return ti;
+}
+
+#endif /* __ASSEMBLY__ */
+
+/*
+ * Offsets in thread_info structure, used in assembly code
+ */
+#define TI_TASK		0
+#define TI_EXECDOMAIN	4
+#define TI_FLAGS	8
+#define TI_CPU		12
+#define TI_PRE_COUNT	16
+
+#define	PREEMPT_ACTIVE	0x4000000
+
+/*
+ * thread information flag bit numbers
+ */
+#define TIF_SYSCALL_TRACE	0	/* syscall trace active */
+#define TIF_SIGPENDING		1	/* signal pending */
+#define TIF_NEED_RESCHED	2	/* rescheduling necessary */
+#define TIF_POLLING_NRFLAG	3	/* true if poll_idle() is polling
+					   TIF_NEED_RESCHED */
+#define TIF_MEMDIE		4
+#define TIF_RESTORE_SIGMASK	5	/* restore signal mask in do_signal() */
+
+/* as above, but as bit values */
+#define _TIF_SYSCALL_TRACE	(1<<TIF_SYSCALL_TRACE)
+#define _TIF_SIGPENDING		(1<<TIF_SIGPENDING)
+#define _TIF_NEED_RESCHED	(1<<TIF_NEED_RESCHED)
+#define _TIF_POLLING_NRFLAG	(1<<TIF_POLLING_NRFLAG)
+#define _TIF_RESTORE_SIGMASK	(1<<TIF_RESTORE_SIGMASK)
+
+#define _TIF_WORK_MASK		0x0000FFFE	/* work to do on interrupt/exception return */
+
+#endif /* __KERNEL__ */
+
+#endif /* _ASM_THREAD_INFO_H */
diff --git a/include/asm-h8300/timex.h b/arch/h8300/include/asm/timex.h
index 23e67013439f..23e67013439f 100644
--- a/include/asm-h8300/timex.h
+++ b/arch/h8300/include/asm/timex.h
diff --git a/include/asm-h8300/tlb.h b/arch/h8300/include/asm/tlb.h
index 3dea80ad9e6f..3dea80ad9e6f 100644
--- a/include/asm-h8300/tlb.h
+++ b/arch/h8300/include/asm/tlb.h
diff --git a/include/asm-h8300/tlbflush.h b/arch/h8300/include/asm/tlbflush.h
index 41c148a9208e..41c148a9208e 100644
--- a/include/asm-h8300/tlbflush.h
+++ b/arch/h8300/include/asm/tlbflush.h
diff --git a/include/asm-h8300/topology.h b/arch/h8300/include/asm/topology.h
index fdc121924d4c..fdc121924d4c 100644
--- a/include/asm-h8300/topology.h
+++ b/arch/h8300/include/asm/topology.h
diff --git a/include/asm-h8300/traps.h b/arch/h8300/include/asm/traps.h
index 41cf6be02f68..41cf6be02f68 100644
--- a/include/asm-h8300/traps.h
+++ b/arch/h8300/include/asm/traps.h
diff --git a/include/asm-h8300/types.h b/arch/h8300/include/asm/types.h
index 12875190b156..12875190b156 100644
--- a/include/asm-h8300/types.h
+++ b/arch/h8300/include/asm/types.h
diff --git a/include/asm-h8300/uaccess.h b/arch/h8300/include/asm/uaccess.h
index 356068cd0879..356068cd0879 100644
--- a/include/asm-h8300/uaccess.h
+++ b/arch/h8300/include/asm/uaccess.h
diff --git a/include/asm-h8300/ucontext.h b/arch/h8300/include/asm/ucontext.h
index 0bcf8f85fab9..0bcf8f85fab9 100644
--- a/include/asm-h8300/ucontext.h
+++ b/arch/h8300/include/asm/ucontext.h
diff --git a/include/asm-h8300/unaligned.h b/arch/h8300/include/asm/unaligned.h
index b8d06c70c2da..b8d06c70c2da 100644
--- a/include/asm-h8300/unaligned.h
+++ b/arch/h8300/include/asm/unaligned.h
diff --git a/include/asm-h8300/unistd.h b/arch/h8300/include/asm/unistd.h
index 99f3c3561ecb..99f3c3561ecb 100644
--- a/include/asm-h8300/unistd.h
+++ b/arch/h8300/include/asm/unistd.h
diff --git a/include/asm-h8300/user.h b/arch/h8300/include/asm/user.h
index 14a9e18950f1..14a9e18950f1 100644
--- a/include/asm-h8300/user.h
+++ b/arch/h8300/include/asm/user.h
diff --git a/include/asm-h8300/virtconvert.h b/arch/h8300/include/asm/virtconvert.h
index 19cfd62b11c3..19cfd62b11c3 100644
--- a/include/asm-h8300/virtconvert.h
+++ b/arch/h8300/include/asm/virtconvert.h
diff --git a/arch/h8300/mm/init.c b/arch/h8300/mm/init.c
index e4f4199f97ab..9942f24aff9e 100644
--- a/arch/h8300/mm/init.c
+++ b/arch/h8300/mm/init.c
@@ -40,9 +40,6 @@
 
 #undef DEBUG
 
-extern void die_if_kernel(char *,struct pt_regs *,long);
-extern void free_initmem(void);
-
 /*
  * BAD_PAGE is the page that is used for page faults when linux
  * is out-of-memory. Older versions of linux just did a
@@ -64,33 +61,6 @@ unsigned long empty_zero_page;
 
 extern unsigned long rom_length;
 
-void show_mem(void)
-{
-    unsigned long i;
-    int free = 0, total = 0, reserved = 0, shared = 0;
-    int cached = 0;
-
-    printk("\nMem-info:\n");
-    show_free_areas();
-    i = max_mapnr;
-    while (i-- > 0) {
-	total++;
-	if (PageReserved(mem_map+i))
-	    reserved++;
-	else if (PageSwapCache(mem_map+i))
-	    cached++;
-	else if (!page_count(mem_map+i))
-	    free++;
-	else
-	    shared += page_count(mem_map+i) - 1;
-    }
-    printk("%d pages of RAM\n",total);
-    printk("%d free pages\n",free);
-    printk("%d reserved pages\n",reserved);
-    printk("%d pages shared\n",shared);
-    printk("%d pages swap cached\n",cached);
-}
-
 extern unsigned long memory_start;
 extern unsigned long memory_end;
 
@@ -100,7 +70,7 @@ extern unsigned long memory_end;
  * The parameters are pointers to where to stick the starting and ending
  * addresses of available kernel virtual memory.
  */
-void paging_init(void)
+void __init paging_init(void)
 {
 	/*
 	 * Make sure start_mem is page aligned,  otherwise bootmem and
@@ -149,7 +119,7 @@ void paging_init(void)
 	}
 }
 
-void mem_init(void)
+void __init mem_init(void)
 {
 	int codek = 0, datak = 0, initk = 0;
 	/* DAVIDM look at setup memory map generically with reserved area */
@@ -205,7 +175,7 @@ void free_initrd_mem(unsigned long start, unsigned long end)
 #endif
 
 void
-free_initmem()
+free_initmem(void)
 {
 #ifdef CONFIG_RAMKERNEL
 	unsigned long addr;
diff --git a/arch/ia64/Kconfig b/arch/ia64/Kconfig
index 451f2ffb137b..48e496fe1e75 100644
--- a/arch/ia64/Kconfig
+++ b/arch/ia64/Kconfig
@@ -171,8 +171,8 @@ config IA64_SGI_SN2
 	  to select this option.  If in doubt, select ia64 generic support
 	  instead.
 
-config IA64_SGI_UV`
-	bool "SGI-UV`"
+config IA64_SGI_UV
+	bool "SGI-UV"
 	select NUMA
 	select ACPI_NUMA
 	select SWIOTLB
@@ -321,10 +321,10 @@ config SMP
 	  If you don't know what to do here, say N.
 
 config NR_CPUS
-	int "Maximum number of CPUs (2-1024)"
-	range 2 1024
+	int "Maximum number of CPUs (2-4096)"
+	range 2 4096
 	depends on SMP
-	default "1024"
+	default "4096"
 	help
 	  You should set this to the number of CPUs in your system, but
 	  keep in mind that a kernel compiled for, e.g., 2 CPUs will boot but
diff --git a/arch/ia64/configs/generic_defconfig b/arch/ia64/configs/generic_defconfig
index 0210545e7f61..9f483976228f 100644
--- a/arch/ia64/configs/generic_defconfig
+++ b/arch/ia64/configs/generic_defconfig
@@ -1,20 +1,16 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.22
-# Thu Jul 19 13:55:32 2007
+# Linux kernel version: 2.6.27-rc1
+# Mon Aug  4 15:38:01 2008
 #
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
-# Code maturity level options
+# General setup
 #
 CONFIG_EXPERIMENTAL=y
 CONFIG_LOCK_KERNEL=y
 CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
 CONFIG_LOCALVERSION=""
 CONFIG_LOCALVERSION_AUTO=y
 CONFIG_SWAP=y
@@ -23,20 +19,34 @@ CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_POSIX_MQUEUE=y
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
 # CONFIG_AUDIT is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=20
-# CONFIG_CPUSETS is not set
+CONFIG_CGROUPS=y
+# CONFIG_CGROUP_DEBUG is not set
+# CONFIG_CGROUP_NS is not set
+# CONFIG_CGROUP_DEVICE is not set
+CONFIG_CPUSETS=y
+# CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUP_CPUACCT is not set
+# CONFIG_RESOURCE_COUNTERS is not set
 CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+CONFIG_PROC_PID_CPUSET=y
 # CONFIG_RELAY is not set
+CONFIG_NAMESPACES=y
+# CONFIG_UTS_NS is not set
+# CONFIG_IPC_NS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
 CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 CONFIG_SYSCTL=y
 # CONFIG_EMBEDDED is not set
 CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
@@ -44,6 +54,7 @@ CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
 CONFIG_ANON_INODES=y
@@ -53,12 +64,30 @@ CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLUB_DEBUG=y
+# CONFIG_SLAB is not set
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
+# CONFIG_HAVE_IOREMAP_PROT is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+# CONFIG_HAVE_ARCH_TRACEHOOK is not set
+CONFIG_HAVE_DMA_ATTRS=y
+CONFIG_USE_GENERIC_SMP_HELPERS=y
+# CONFIG_HAVE_CLK is not set
+CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
+CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 CONFIG_MODVERSIONS=y
@@ -68,6 +97,8 @@ CONFIG_STOP_MACHINE=y
 CONFIG_BLOCK=y
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+CONFIG_BLOCK_COMPAT=y
 
 #
 # IO Schedulers
@@ -81,6 +112,7 @@ CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_CFQ is not set
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_CLASSIC_RCU=y
 
 #
 # Processor type and features
@@ -91,22 +123,28 @@ CONFIG_ZONE_DMA=y
 CONFIG_QUICKLIST=y
 CONFIG_MMU=y
 CONFIG_SWIOTLB=y
+CONFIG_IOMMU_HELPER=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 # CONFIG_ARCH_HAS_ILOG2_U32 is not set
 # CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_HUGETLB_PAGE_SIZE_VARIABLE=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_TIME_VSYSCALL=y
+CONFIG_HAVE_SETUP_PER_CPU_AREA=y
 CONFIG_DMI=y
 CONFIG_EFI=y
 CONFIG_GENERIC_IOMAP=y
 CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_IA64_UNCACHED_ALLOCATOR=y
 CONFIG_AUDIT_ARCH=y
 CONFIG_IA64_GENERIC=y
 # CONFIG_IA64_DIG is not set
 # CONFIG_IA64_HP_ZX1 is not set
 # CONFIG_IA64_HP_ZX1_SWIOTLB is not set
 # CONFIG_IA64_SGI_SN2 is not set
+# CONFIG_IA64_SGI_UV is not set
 # CONFIG_IA64_HP_SIM is not set
 # CONFIG_ITANIUM is not set
 CONFIG_MCKINLEY=y
@@ -116,22 +154,26 @@ CONFIG_MCKINLEY=y
 CONFIG_IA64_PAGE_SIZE_64KB=y
 CONFIG_PGTABLE_3=y
 # CONFIG_PGTABLE_4 is not set
+CONFIG_HZ=250
 # CONFIG_HZ_100 is not set
 CONFIG_HZ_250=y
 # CONFIG_HZ_300 is not set
 # CONFIG_HZ_1000 is not set
-CONFIG_HZ=250
+# CONFIG_SCHED_HRTICK is not set
 CONFIG_IA64_L1_CACHE_SHIFT=7
 CONFIG_IA64_CYCLONE=y
 CONFIG_IOSAPIC=y
-# CONFIG_IA64_SGI_SN_XP is not set
 CONFIG_FORCE_MAX_ZONEORDER=17
+# CONFIG_VIRT_CPU_ACCOUNTING is not set
 CONFIG_SMP=y
-CONFIG_NR_CPUS=512
+CONFIG_NR_CPUS=4096
 CONFIG_HOTPLUG_CPU=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
 # CONFIG_SCHED_SMT is not set
 # CONFIG_PERMIT_BSP_REMOVE is not set
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
 CONFIG_SELECT_MEMORY_MODEL=y
 # CONFIG_FLATMEM_MANUAL is not set
@@ -141,6 +183,8 @@ CONFIG_DISCONTIGMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 CONFIG_NEED_MULTIPLE_NODES=y
 # CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
+CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 CONFIG_MIGRATION=y
 CONFIG_RESOURCES_64BIT=y
@@ -148,6 +192,7 @@ CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_NR_QUICK=1
 CONFIG_VIRT_TO_BUS=y
+CONFIG_MMU_NOTIFIER=y
 CONFIG_ARCH_SELECT_MEMORY_MODEL=y
 CONFIG_ARCH_DISCONTIGMEM_ENABLE=y
 CONFIG_ARCH_FLATMEM_ENABLE=y
@@ -162,12 +207,14 @@ CONFIG_HAVE_ARCH_EARLY_PFN_TO_NID=y
 CONFIG_HAVE_ARCH_NODEDATA_EXTENSION=y
 CONFIG_IA32_SUPPORT=y
 CONFIG_COMPAT=y
+CONFIG_COMPAT_FOR_U64_ALIGNMENT=y
 CONFIG_IA64_MCA_RECOVERY=y
 CONFIG_PERFMON=y
 CONFIG_IA64_PALINFO=y
 # CONFIG_IA64_MC_ERR_INJECT is not set
 CONFIG_SGI_SN=y
 # CONFIG_IA64_ESI is not set
+# CONFIG_IA64_HP_AML_NFW is not set
 
 #
 # SN Devices
@@ -179,6 +226,7 @@ CONFIG_CRASH_DUMP=y
 #
 # Firmware Drivers
 #
+# CONFIG_FIRMWARE_MEMMAP is not set
 CONFIG_EFI_VARS=y
 CONFIG_EFI_PCDP=y
 CONFIG_DMIID=y
@@ -189,24 +237,25 @@ CONFIG_BINFMT_MISC=m
 # Power management and ACPI
 #
 CONFIG_PM=y
-CONFIG_PM_LEGACY=y
 # CONFIG_PM_DEBUG is not set
-
-#
-# ACPI (Advanced Configuration and Power Interface) Support
-#
 CONFIG_ACPI=y
 CONFIG_ACPI_PROCFS=y
+CONFIG_ACPI_PROCFS_POWER=y
+CONFIG_ACPI_SYSFS_POWER=y
+CONFIG_ACPI_PROC_EVENT=y
 CONFIG_ACPI_BUTTON=m
 CONFIG_ACPI_FAN=m
-# CONFIG_ACPI_DOCK is not set
+CONFIG_ACPI_DOCK=y
+# CONFIG_ACPI_BAY is not set
 CONFIG_ACPI_PROCESSOR=m
 CONFIG_ACPI_HOTPLUG_CPU=y
 CONFIG_ACPI_THERMAL=m
 CONFIG_ACPI_NUMA=y
+# CONFIG_ACPI_CUSTOM_DSDT is not set
 CONFIG_ACPI_BLACKLIST_YEAR=0
 # CONFIG_ACPI_DEBUG is not set
 CONFIG_ACPI_EC=y
+# CONFIG_ACPI_PCI_SLOT is not set
 CONFIG_ACPI_POWER=y
 CONFIG_ACPI_SYSTEM=y
 CONFIG_ACPI_CONTAINER=m
@@ -225,6 +274,7 @@ CONFIG_PCI_SYSCALL=y
 # CONFIG_PCIEPORTBUS is not set
 CONFIG_ARCH_SUPPORTS_MSI=y
 # CONFIG_PCI_MSI is not set
+CONFIG_PCI_LEGACY=y
 # CONFIG_PCI_DEBUG is not set
 CONFIG_HOTPLUG_PCI=m
 # CONFIG_HOTPLUG_PCI_FAKE is not set
@@ -233,15 +283,7 @@ CONFIG_HOTPLUG_PCI_ACPI=m
 # CONFIG_HOTPLUG_PCI_CPCI is not set
 # CONFIG_HOTPLUG_PCI_SHPC is not set
 # CONFIG_HOTPLUG_PCI_SGI is not set
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
 # CONFIG_PCCARD is not set
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -254,6 +296,7 @@ CONFIG_XFRM=y
 # CONFIG_XFRM_USER is not set
 # CONFIG_XFRM_SUB_POLICY is not set
 # CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
 # CONFIG_NET_KEY is not set
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
@@ -273,6 +316,7 @@ CONFIG_SYN_COOKIES=y
 CONFIG_INET_XFRM_MODE_TRANSPORT=y
 CONFIG_INET_XFRM_MODE_TUNNEL=y
 CONFIG_INET_XFRM_MODE_BEET=y
+CONFIG_INET_LRO=m
 CONFIG_INET_DIAG=y
 CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
@@ -280,8 +324,6 @@ CONFIG_TCP_CONG_CUBIC=y
 CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
 # CONFIG_NETWORK_SECMARK is not set
 # CONFIG_NETFILTER is not set
 # CONFIG_IP_DCCP is not set
@@ -298,10 +340,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
 # CONFIG_NET_SCHED is not set
 
 #
@@ -309,6 +347,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 #
 # CONFIG_NET_PKTGEN is not set
 # CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
@@ -330,13 +369,17 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 #
 # Generic Driver Options
 #
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=m
+CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_DEBUG_DRIVER is not set
 # CONFIG_DEBUG_DEVRES is not set
 # CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
+CONFIG_CONNECTOR=y
+CONFIG_PROC_EVENTS=y
 # CONFIG_MTD is not set
 # CONFIG_PARPORT is not set
 CONFIG_PNP=y
@@ -360,25 +403,35 @@ CONFIG_BLK_DEV_NBD=m
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_PHANTOM is not set
 # CONFIG_EEPROM_93CX6 is not set
 CONFIG_SGI_IOC4=y
 # CONFIG_TIFM_CORE is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+CONFIG_SGI_XP=m
+# CONFIG_HP_ILO is not set
+CONFIG_SGI_GRU=m
+# CONFIG_SGI_GRU_DEBUG is not set
+CONFIG_HAVE_IDE=y
 CONFIG_IDE=y
 CONFIG_IDE_MAX_HWIFS=4
 CONFIG_BLK_DEV_IDE=y
 
 #
-# Please see Documentation/ide.txt for help/info on IDE drives
+# Please see Documentation/ide/ide.txt for help/info on IDE drives
 #
+CONFIG_IDE_TIMINGS=y
+CONFIG_IDE_ATAPI=y
 # CONFIG_BLK_DEV_IDE_SATA is not set
 CONFIG_BLK_DEV_IDEDISK=y
 # CONFIG_IDEDISK_MULTI_MODE is not set
 CONFIG_BLK_DEV_IDECD=y
+CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y
 # CONFIG_BLK_DEV_IDETAPE is not set
 CONFIG_BLK_DEV_IDEFLOPPY=y
 CONFIG_BLK_DEV_IDESCSI=m
@@ -390,25 +443,26 @@ CONFIG_IDE_PROC_FS=y
 # IDE chipset support/bugfixes
 #
 # CONFIG_IDE_GENERIC is not set
+# CONFIG_BLK_DEV_PLATFORM is not set
 # CONFIG_BLK_DEV_IDEPNP is not set
+CONFIG_BLK_DEV_IDEDMA_SFF=y
+
+#
+# PCI IDE chipsets support
+#
 CONFIG_BLK_DEV_IDEPCI=y
-CONFIG_IDEPCI_SHARE_IRQ=y
 CONFIG_IDEPCI_PCIBUS_ORDER=y
 # CONFIG_BLK_DEV_OFFBOARD is not set
 CONFIG_BLK_DEV_GENERIC=y
 # CONFIG_BLK_DEV_OPTI621 is not set
 CONFIG_BLK_DEV_IDEDMA_PCI=y
-# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
-# CONFIG_IDEDMA_ONLYDISK is not set
 # CONFIG_BLK_DEV_AEC62XX is not set
 # CONFIG_BLK_DEV_ALI15X3 is not set
 # CONFIG_BLK_DEV_AMD74XX is not set
 CONFIG_BLK_DEV_CMD64X=y
 # CONFIG_BLK_DEV_TRIFLEX is not set
-# CONFIG_BLK_DEV_CY82C693 is not set
 # CONFIG_BLK_DEV_CS5520 is not set
 # CONFIG_BLK_DEV_CS5530 is not set
-# CONFIG_BLK_DEV_HPT34X is not set
 # CONFIG_BLK_DEV_HPT366 is not set
 # CONFIG_BLK_DEV_JMICRON is not set
 # CONFIG_BLK_DEV_SC1200 is not set
@@ -425,10 +479,7 @@ CONFIG_BLK_DEV_SGIIOC4=y
 # CONFIG_BLK_DEV_TRM290 is not set
 # CONFIG_BLK_DEV_VIA82CXXX is not set
 # CONFIG_BLK_DEV_TC86C001 is not set
-# CONFIG_IDE_ARM is not set
 CONFIG_BLK_DEV_IDEDMA=y
-# CONFIG_IDEDMA_IVB is not set
-# CONFIG_BLK_DEV_HD is not set
 
 #
 # SCSI device support
@@ -468,10 +519,8 @@ CONFIG_SCSI_FC_ATTRS=y
 # CONFIG_SCSI_ISCSI_ATTRS is not set
 CONFIG_SCSI_SAS_ATTRS=y
 # CONFIG_SCSI_SAS_LIBSAS is not set
-
-#
-# SCSI low-level drivers
-#
+# CONFIG_SCSI_SRP_ATTRS is not set
+CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_ISCSI_TCP is not set
 # CONFIG_BLK_DEV_3W_XXXX_RAID is not set
 # CONFIG_SCSI_3W_9XXX is not set
@@ -481,6 +530,8 @@ CONFIG_SCSI_SAS_ATTRS=y
 # CONFIG_SCSI_AIC7XXX_OLD is not set
 # CONFIG_SCSI_AIC79XX is not set
 # CONFIG_SCSI_AIC94XX is not set
+# CONFIG_SCSI_DPT_I2O is not set
+# CONFIG_SCSI_ADVANSYS is not set
 # CONFIG_SCSI_ARCMSR is not set
 # CONFIG_MEGARAID_NEWGEN is not set
 # CONFIG_MEGARAID_LEGACY is not set
@@ -491,12 +542,14 @@ CONFIG_SCSI_SAS_ATTRS=y
 # CONFIG_SCSI_IPS is not set
 # CONFIG_SCSI_INITIO is not set
 # CONFIG_SCSI_INIA100 is not set
+# CONFIG_SCSI_MVSAS is not set
 # CONFIG_SCSI_STEX is not set
 CONFIG_SCSI_SYM53C8XX_2=y
 CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=1
 CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16
 CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
 CONFIG_SCSI_SYM53C8XX_MMIO=y
+# CONFIG_SCSI_IPR is not set
 CONFIG_SCSI_QLOGIC_1280=y
 # CONFIG_SCSI_QLA_FC is not set
 # CONFIG_SCSI_QLA_ISCSI is not set
@@ -505,7 +558,68 @@ CONFIG_SCSI_QLOGIC_1280=y
 # CONFIG_SCSI_DC390T is not set
 # CONFIG_SCSI_DEBUG is not set
 # CONFIG_SCSI_SRP is not set
-# CONFIG_ATA is not set
+# CONFIG_SCSI_DH is not set
+CONFIG_ATA=y
+CONFIG_ATA_NONSTANDARD=y
+CONFIG_ATA_ACPI=y
+CONFIG_SATA_PMP=y
+# CONFIG_SATA_AHCI is not set
+# CONFIG_SATA_SIL24 is not set
+CONFIG_ATA_SFF=y
+# CONFIG_SATA_SVW is not set
+CONFIG_ATA_PIIX=y
+# CONFIG_SATA_MV is not set
+# CONFIG_SATA_NV is not set
+# CONFIG_PDC_ADMA is not set
+# CONFIG_SATA_QSTOR is not set
+# CONFIG_SATA_PROMISE is not set
+# CONFIG_SATA_SX4 is not set
+# CONFIG_SATA_SIL is not set
+# CONFIG_SATA_SIS is not set
+# CONFIG_SATA_ULI is not set
+# CONFIG_SATA_VIA is not set
+# CONFIG_SATA_VITESSE is not set
+# CONFIG_SATA_INIC162X is not set
+# CONFIG_PATA_ACPI is not set
+# CONFIG_PATA_ALI is not set
+# CONFIG_PATA_AMD is not set
+# CONFIG_PATA_ARTOP is not set
+# CONFIG_PATA_ATIIXP is not set
+# CONFIG_PATA_CMD640_PCI is not set
+# CONFIG_PATA_CMD64X is not set
+# CONFIG_PATA_CS5520 is not set
+# CONFIG_PATA_CS5530 is not set
+# CONFIG_PATA_CYPRESS is not set
+# CONFIG_PATA_EFAR is not set
+# CONFIG_ATA_GENERIC is not set
+# CONFIG_PATA_HPT366 is not set
+# CONFIG_PATA_HPT37X is not set
+# CONFIG_PATA_HPT3X2N is not set
+# CONFIG_PATA_HPT3X3 is not set
+# CONFIG_PATA_IT821X is not set
+# CONFIG_PATA_IT8213 is not set
+# CONFIG_PATA_JMICRON is not set
+# CONFIG_PATA_TRIFLEX is not set
+# CONFIG_PATA_MARVELL is not set
+# CONFIG_PATA_MPIIX is not set
+# CONFIG_PATA_OLDPIIX is not set
+# CONFIG_PATA_NETCELL is not set
+# CONFIG_PATA_NINJA32 is not set
+# CONFIG_PATA_NS87410 is not set
+# CONFIG_PATA_NS87415 is not set
+# CONFIG_PATA_OPTI is not set
+# CONFIG_PATA_OPTIDMA is not set
+# CONFIG_PATA_PDC_OLD is not set
+# CONFIG_PATA_RADISYS is not set
+# CONFIG_PATA_RZ1000 is not set
+# CONFIG_PATA_SC1200 is not set
+# CONFIG_PATA_SERVERWORKS is not set
+# CONFIG_PATA_PDC2027X is not set
+# CONFIG_PATA_SIL680 is not set
+# CONFIG_PATA_SIS is not set
+# CONFIG_PATA_VIA is not set
+# CONFIG_PATA_WINBOND is not set
+# CONFIG_PATA_SCH is not set
 CONFIG_MD=y
 CONFIG_BLK_DEV_MD=m
 CONFIG_MD_LINEAR=m
@@ -522,36 +636,52 @@ CONFIG_DM_SNAPSHOT=m
 CONFIG_DM_MIRROR=m
 CONFIG_DM_ZERO=m
 CONFIG_DM_MULTIPATH=m
-# CONFIG_DM_MULTIPATH_EMC is not set
-# CONFIG_DM_MULTIPATH_RDAC is not set
 # CONFIG_DM_DELAY is not set
-
-#
-# Fusion MPT device support
-#
+# CONFIG_DM_UEVENT is not set
 CONFIG_FUSION=y
 CONFIG_FUSION_SPI=y
 CONFIG_FUSION_FC=m
 CONFIG_FUSION_SAS=y
 CONFIG_FUSION_MAX_SGE=128
 # CONFIG_FUSION_CTL is not set
+# CONFIG_FUSION_LOGGING is not set
 
 #
 # IEEE 1394 (FireWire) support
 #
+
+#
+# Enable only one of the two stacks, unless you know what you are doing
+#
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 CONFIG_DUMMY=m
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
 # CONFIG_EQUALIZER is not set
 # CONFIG_TUN is not set
+# CONFIG_VETH is not set
 # CONFIG_NET_SB1000 is not set
 # CONFIG_ARCNET is not set
-# CONFIG_PHYLIB is not set
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+# CONFIG_MARVELL_PHY is not set
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+# CONFIG_SMSC_PHY is not set
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
+# CONFIG_FIXED_PHY is not set
+# CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=m
 # CONFIG_HAPPYMEAL is not set
@@ -569,13 +699,16 @@ CONFIG_TULIP=m
 # CONFIG_DM9102 is not set
 # CONFIG_ULI526X is not set
 # CONFIG_HP100 is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
 CONFIG_NET_PCI=y
 # CONFIG_PCNET32 is not set
 # CONFIG_AMD8111_ETH is not set
 # CONFIG_ADAPTEC_STARFIRE is not set
 # CONFIG_B44 is not set
 # CONFIG_FORCEDETH is not set
-# CONFIG_DGRS is not set
 CONFIG_EEPRO100=m
 CONFIG_E100=m
 # CONFIG_FEALNX is not set
@@ -583,17 +716,22 @@ CONFIG_E100=m
 # CONFIG_NE2K_PCI is not set
 # CONFIG_8139CP is not set
 # CONFIG_8139TOO is not set
+# CONFIG_R6040 is not set
 # CONFIG_SIS900 is not set
 # CONFIG_EPIC100 is not set
 # CONFIG_SUNDANCE is not set
+# CONFIG_TLAN is not set
 # CONFIG_VIA_RHINE is not set
 # CONFIG_SC92031 is not set
 CONFIG_NETDEV_1000=y
 # CONFIG_ACENIC is not set
 # CONFIG_DL2K is not set
 CONFIG_E1000=y
-# CONFIG_E1000_NAPI is not set
 # CONFIG_E1000_DISABLE_PACKET_SPLIT is not set
+# CONFIG_E1000E is not set
+# CONFIG_IP1000 is not set
+CONFIG_IGB=y
+# CONFIG_IGB_LRO is not set
 # CONFIG_NS83820 is not set
 # CONFIG_HAMACHI is not set
 # CONFIG_YELLOWFIN is not set
@@ -606,14 +744,20 @@ CONFIG_TIGON3=y
 # CONFIG_BNX2 is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
+# CONFIG_ATL1E is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
 # CONFIG_CHELSIO_T3 is not set
+# CONFIG_IXGBE is not set
 # CONFIG_IXGB is not set
 # CONFIG_S2IO is not set
 # CONFIG_MYRI10GE is not set
 # CONFIG_NETXEN_NIC is not set
+# CONFIG_NIU is not set
 # CONFIG_MLX4_CORE is not set
+# CONFIG_TEHUTI is not set
+# CONFIG_BNX2X is not set
+# CONFIG_SFC is not set
 # CONFIG_TR is not set
 
 #
@@ -621,6 +765,7 @@ CONFIG_NETDEV_10000=y
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
 
 #
 # USB Network Adapters
@@ -629,7 +774,6 @@ CONFIG_NETDEV_10000=y
 # CONFIG_USB_KAWETH is not set
 # CONFIG_USB_PEGASUS is not set
 # CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET_MII is not set
 # CONFIG_USB_USBNET is not set
 # CONFIG_WAN is not set
 # CONFIG_FDDI is not set
@@ -637,8 +781,8 @@ CONFIG_NETDEV_10000=y
 # CONFIG_PPP is not set
 # CONFIG_SLIP is not set
 # CONFIG_NET_FC is not set
-# CONFIG_SHAPER is not set
 CONFIG_NETCONSOLE=y
+# CONFIG_NETCONSOLE_DYNAMIC is not set
 CONFIG_NETPOLL=y
 # CONFIG_NETPOLL_TRAP is not set
 CONFIG_NET_POLL_CONTROLLER=y
@@ -660,7 +804,6 @@ CONFIG_INPUT_MOUSEDEV_PSAUX=y
 CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
 # CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
 # CONFIG_INPUT_EVDEV is not set
 # CONFIG_INPUT_EVBUG is not set
 
@@ -709,9 +852,11 @@ CONFIG_GAMEPORT=m
 # Character devices
 #
 CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
 # CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
 CONFIG_SERIAL_NONSTANDARD=y
 # CONFIG_COMPUTONE is not set
 # CONFIG_ROCKETPORT is not set
@@ -719,15 +864,16 @@ CONFIG_SERIAL_NONSTANDARD=y
 # CONFIG_DIGIEPCA is not set
 # CONFIG_MOXA_INTELLIO is not set
 # CONFIG_MOXA_SMARTIO is not set
-# CONFIG_MOXA_SMARTIO_NEW is not set
 # CONFIG_ISI is not set
 # CONFIG_SYNCLINKMP is not set
 # CONFIG_SYNCLINK_GT is not set
 # CONFIG_N_HDLC is not set
+# CONFIG_RISCOM8 is not set
 # CONFIG_SPECIALIX is not set
 # CONFIG_SX is not set
 # CONFIG_RIO is not set
 # CONFIG_STALDRV is not set
+# CONFIG_NOZOMI is not set
 CONFIG_SGI_SNSC=y
 CONFIG_SGI_TIOCX=y
 CONFIG_SGI_MBCS=m
@@ -759,76 +905,100 @@ CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_IPMI_HANDLER is not set
-# CONFIG_WATCHDOG is not set
 # CONFIG_HW_RANDOM is not set
 CONFIG_EFI_RTC=y
 # CONFIG_R3964 is not set
 # CONFIG_APPLICOM is not set
-CONFIG_AGP=m
-CONFIG_AGP_I460=m
-CONFIG_AGP_HP_ZX1=m
-CONFIG_AGP_SGI_TIOCA=m
-CONFIG_DRM=m
-CONFIG_DRM_TDFX=m
-CONFIG_DRM_R128=m
-CONFIG_DRM_RADEON=m
-CONFIG_DRM_MGA=m
-CONFIG_DRM_SIS=m
-# CONFIG_DRM_VIA is not set
-# CONFIG_DRM_SAVAGE is not set
 CONFIG_RAW_DRIVER=m
 CONFIG_MAX_RAW_DEVS=256
 CONFIG_HPET=y
-# CONFIG_HPET_RTC_IRQ is not set
 CONFIG_HPET_MMAP=y
 # CONFIG_HANGCHECK_TIMER is not set
 CONFIG_MMTIMER=y
 # CONFIG_TCG_TPM is not set
 CONFIG_DEVPORT=y
 # CONFIG_I2C is not set
-
-#
-# SPI support
-#
 # CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
 # CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
+CONFIG_POWER_SUPPLY=y
+# CONFIG_POWER_SUPPLY_DEBUG is not set
+# CONFIG_PDA_POWER is not set
+# CONFIG_BATTERY_DS2760 is not set
 CONFIG_HWMON=y
 # CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_ABITUGURU is not set
+# CONFIG_SENSORS_I5K_AMB is not set
 # CONFIG_SENSORS_F71805F is not set
+# CONFIG_SENSORS_F71882FG is not set
+# CONFIG_SENSORS_IT87 is not set
+# CONFIG_SENSORS_PC87360 is not set
 # CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_SIS5595 is not set
 # CONFIG_SENSORS_SMSC47M1 is not set
 # CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_VIA686A is not set
 # CONFIG_SENSORS_VT1211 is not set
+# CONFIG_SENSORS_VT8231 is not set
 # CONFIG_SENSORS_W83627HF is not set
+# CONFIG_SENSORS_W83627EHF is not set
 # CONFIG_HWMON_DEBUG_CHIP is not set
+CONFIG_THERMAL=m
+# CONFIG_THERMAL_HWMON is not set
+# CONFIG_WATCHDOG is not set
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
 
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
 
 #
 # Multimedia devices
 #
+
+#
+# Multimedia core support
+#
 # CONFIG_VIDEO_DEV is not set
 # CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
 CONFIG_DAB=y
 # CONFIG_USB_DABUSB is not set
 
 #
 # Graphics support
 #
+CONFIG_AGP=m
+CONFIG_AGP_I460=m
+CONFIG_AGP_HP_ZX1=m
+CONFIG_AGP_SGI_TIOCA=m
+CONFIG_DRM=m
+CONFIG_DRM_TDFX=m
+CONFIG_DRM_R128=m
+CONFIG_DRM_RADEON=m
+CONFIG_DRM_MGA=m
+CONFIG_DRM_SIS=m
+# CONFIG_DRM_VIA is not set
+# CONFIG_DRM_SAVAGE is not set
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
 # CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
 # Display device support
 #
 # CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_VGASTATE is not set
-# CONFIG_FB is not set
 
 #
 # Console display driver support
@@ -836,15 +1006,7 @@ CONFIG_DAB=y
 CONFIG_VGA_CONSOLE=y
 # CONFIG_VGACON_SOFT_SCROLLBACK is not set
 CONFIG_DUMMY_CONSOLE=y
-
-#
-# Sound
-#
 CONFIG_SOUND=m
-
-#
-# Advanced Linux Sound Architecture
-#
 CONFIG_SND=m
 CONFIG_SND_TIMER=m
 CONFIG_SND_PCM=m
@@ -862,22 +1024,18 @@ CONFIG_SND_SUPPORT_OLD_API=y
 CONFIG_SND_VERBOSE_PROCFS=y
 CONFIG_SND_VERBOSE_PRINTK=y
 # CONFIG_SND_DEBUG is not set
-
-#
-# Generic devices
-#
+CONFIG_SND_VMASTER=y
 CONFIG_SND_MPU401_UART=m
 CONFIG_SND_OPL3_LIB=m
 CONFIG_SND_AC97_CODEC=m
+CONFIG_SND_DRIVERS=y
 CONFIG_SND_DUMMY=m
 CONFIG_SND_VIRMIDI=m
 CONFIG_SND_MTPAV=m
 CONFIG_SND_SERIAL_U16550=m
 CONFIG_SND_MPU401=m
-
-#
-# PCI devices
-#
+# CONFIG_SND_AC97_POWER_SAVE is not set
+CONFIG_SND_PCI=y
 # CONFIG_SND_AD1889 is not set
 # CONFIG_SND_ALS300 is not set
 # CONFIG_SND_ALI5451 is not set
@@ -886,10 +1044,12 @@ CONFIG_SND_MPU401=m
 # CONFIG_SND_AU8810 is not set
 # CONFIG_SND_AU8820 is not set
 # CONFIG_SND_AU8830 is not set
+# CONFIG_SND_AW2 is not set
 # CONFIG_SND_AZT3328 is not set
 # CONFIG_SND_BT87X is not set
 # CONFIG_SND_CA0106 is not set
 # CONFIG_SND_CMIPCI is not set
+# CONFIG_SND_OXYGEN is not set
 CONFIG_SND_CS4281=m
 CONFIG_SND_CS46XX=m
 CONFIG_SND_CS46XX_NEW_DSP=y
@@ -912,10 +1072,10 @@ CONFIG_SND_EMU10K1=m
 # CONFIG_SND_ES1938 is not set
 # CONFIG_SND_ES1968 is not set
 CONFIG_SND_FM801=m
-# CONFIG_SND_FM801_TEA575X_BOOL is not set
 # CONFIG_SND_HDA_INTEL is not set
 # CONFIG_SND_HDSP is not set
 # CONFIG_SND_HDSPM is not set
+# CONFIG_SND_HIFIER is not set
 # CONFIG_SND_ICE1712 is not set
 # CONFIG_SND_ICE1724 is not set
 # CONFIG_SND_INTEL8X0 is not set
@@ -933,29 +1093,19 @@ CONFIG_SND_FM801=m
 # CONFIG_SND_TRIDENT is not set
 # CONFIG_SND_VIA82XX is not set
 # CONFIG_SND_VIA82XX_MODEM is not set
+# CONFIG_SND_VIRTUOSO is not set
 # CONFIG_SND_VX222 is not set
 # CONFIG_SND_YMFPCI is not set
-# CONFIG_SND_AC97_POWER_SAVE is not set
-
-#
-# USB devices
-#
+CONFIG_SND_USB=y
 # CONFIG_SND_USB_AUDIO is not set
 # CONFIG_SND_USB_CAIAQ is not set
-
-#
-# System on Chip audio support
-#
 # CONFIG_SND_SOC is not set
-
-#
-# Open Sound System
-#
 # CONFIG_SOUND_PRIME is not set
 CONFIG_AC97_BUS=m
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
 # CONFIG_HID_DEBUG is not set
+# CONFIG_HIDRAW is not set
 
 #
 # USB Input Devices
@@ -976,6 +1126,7 @@ CONFIG_USB_ARCH_HAS_OHCI=y
 CONFIG_USB_ARCH_HAS_EHCI=y
 CONFIG_USB=m
 # CONFIG_USB_DEBUG is not set
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
 
 #
 # Miscellaneous USB options
@@ -984,17 +1135,17 @@ CONFIG_USB_DEVICEFS=y
 CONFIG_USB_DEVICE_CLASS=y
 # CONFIG_USB_DYNAMIC_MINORS is not set
 # CONFIG_USB_SUSPEND is not set
-# CONFIG_USB_PERSIST is not set
 # CONFIG_USB_OTG is not set
 
 #
 # USB Host Controller Drivers
 #
+# CONFIG_USB_C67X00_HCD is not set
 CONFIG_USB_EHCI_HCD=m
-# CONFIG_USB_EHCI_SPLIT_ISO is not set
 # CONFIG_USB_EHCI_ROOT_HUB_TT is not set
 # CONFIG_USB_EHCI_TT_NEWSCHED is not set
 # CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
 CONFIG_USB_OHCI_HCD=m
 # CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
 # CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
@@ -1008,6 +1159,7 @@ CONFIG_USB_UHCI_HCD=m
 #
 # CONFIG_USB_ACM is not set
 # CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
 
 #
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
@@ -1027,7 +1179,9 @@ CONFIG_USB_STORAGE=m
 # CONFIG_USB_STORAGE_SDDR55 is not set
 # CONFIG_USB_STORAGE_JUMPSHOT is not set
 # CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_ONETOUCH is not set
 # CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
 # CONFIG_USB_LIBUSUAL is not set
 
 #
@@ -1040,10 +1194,6 @@ CONFIG_USB_MON=y
 #
 # USB port drivers
 #
-
-#
-# USB Serial Converter support
-#
 # CONFIG_USB_SERIAL is not set
 
 #
@@ -1069,67 +1219,32 @@ CONFIG_USB_MON=y
 # CONFIG_USB_TRANCEVIBRATOR is not set
 # CONFIG_USB_IOWARRIOR is not set
 # CONFIG_USB_TEST is not set
-
-#
-# USB DSL modem support
-#
-
-#
-# USB Gadget Support
-#
+# CONFIG_USB_ISIGHTFW is not set
 # CONFIG_USB_GADGET is not set
 # CONFIG_MMC is not set
-
-#
-# LED devices
-#
+# CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
-
-#
-# LED drivers
-#
-
-#
-# LED Triggers
-#
+# CONFIG_ACCESSIBILITY is not set
 CONFIG_INFINIBAND=m
 # CONFIG_INFINIBAND_USER_MAD is not set
 # CONFIG_INFINIBAND_USER_ACCESS is not set
 CONFIG_INFINIBAND_ADDR_TRANS=y
 CONFIG_INFINIBAND_MTHCA=m
 CONFIG_INFINIBAND_MTHCA_DEBUG=y
+# CONFIG_INFINIBAND_IPATH is not set
 # CONFIG_INFINIBAND_AMSO1100 is not set
 # CONFIG_MLX4_INFINIBAND is not set
+# CONFIG_INFINIBAND_NES is not set
 CONFIG_INFINIBAND_IPOIB=m
 # CONFIG_INFINIBAND_IPOIB_CM is not set
 CONFIG_INFINIBAND_IPOIB_DEBUG=y
 # CONFIG_INFINIBAND_IPOIB_DEBUG_DATA is not set
 # CONFIG_INFINIBAND_SRP is not set
 # CONFIG_INFINIBAND_ISER is not set
-
-#
-# Real Time Clock
-#
 # CONFIG_RTC_CLASS is not set
-
-#
-# DMA Engine support
-#
-# CONFIG_DMA_ENGINE is not set
-
-#
-# DMA Clients
-#
-
-#
-# DMA Devices
-#
-
-#
-# Userspace I/O
-#
+# CONFIG_DMADEVICES is not set
 # CONFIG_UIO is not set
-# CONFIG_MSPEC is not set
+CONFIG_MSPEC=m
 
 #
 # File systems
@@ -1145,7 +1260,6 @@ CONFIG_EXT3_FS_POSIX_ACL=y
 CONFIG_EXT3_FS_SECURITY=y
 # CONFIG_EXT4DEV_FS is not set
 CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
 CONFIG_FS_MBCACHE=y
 CONFIG_REISERFS_FS=y
 # CONFIG_REISERFS_CHECK is not set
@@ -1157,17 +1271,15 @@ CONFIG_REISERFS_FS_SECURITY=y
 CONFIG_FS_POSIX_ACL=y
 CONFIG_XFS_FS=y
 # CONFIG_XFS_QUOTA is not set
-# CONFIG_XFS_SECURITY is not set
 # CONFIG_XFS_POSIX_ACL is not set
 # CONFIG_XFS_RT is not set
+# CONFIG_XFS_DEBUG is not set
 # CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
+CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
 CONFIG_AUTOFS_FS=y
 CONFIG_AUTOFS4_FS=y
 # CONFIG_FUSE_FS is not set
@@ -1205,7 +1317,6 @@ CONFIG_TMPFS=y
 # CONFIG_TMPFS_POSIX_ACL is not set
 CONFIG_HUGETLBFS=y
 CONFIG_HUGETLB_PAGE=y
-CONFIG_RAMFS=y
 # CONFIG_CONFIGFS_FS is not set
 
 #
@@ -1220,32 +1331,30 @@ CONFIG_RAMFS=y
 # CONFIG_EFS_FS is not set
 # CONFIG_CRAMFS is not set
 # CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
+CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=m
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
-CONFIG_NFS_DIRECTIO=y
 CONFIG_NFSD=m
 CONFIG_NFSD_V3=y
 # CONFIG_NFSD_V3_ACL is not set
 CONFIG_NFSD_V4=y
-CONFIG_NFSD_TCP=y
 CONFIG_LOCKD=m
 CONFIG_LOCKD_V4=y
 CONFIG_EXPORTFS=m
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=m
 CONFIG_SUNRPC_GSS=m
-# CONFIG_SUNRPC_BIND34 is not set
-CONFIG_RPCSEC_GSS_KRB5=y
+CONFIG_SUNRPC_XPRT_RDMA=m
+CONFIG_RPCSEC_GSS_KRB5=m
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 CONFIG_SMB_FS=m
 CONFIG_SMB_NLS_DEFAULT=y
@@ -1281,10 +1390,6 @@ CONFIG_SGI_PARTITION=y
 # CONFIG_KARMA_PARTITION is not set
 CONFIG_EFI_PARTITION=y
 # CONFIG_SYSV68_PARTITION is not set
-
-#
-# Native Language Support
-#
 CONFIG_NLS=y
 CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=y
@@ -1325,22 +1430,24 @@ CONFIG_NLS_ISO8859_15=m
 CONFIG_NLS_KOI8_R=m
 CONFIG_NLS_KOI8_U=m
 CONFIG_NLS_UTF8=m
-
-#
-# Distributed Lock Manager
-#
 # CONFIG_DLM is not set
+CONFIG_HAVE_KVM=y
+CONFIG_VIRTUALIZATION=y
+# CONFIG_KVM is not set
 
 #
 # Library routines
 #
 CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
-# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC_T10DIF=y
+CONFIG_CRC_ITU_T=m
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
 # CONFIG_LIBCRC32C is not set
+CONFIG_GENERIC_ALLOCATOR=y
 CONFIG_PLIST=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
@@ -1358,16 +1465,12 @@ CONFIG_IRQ_PER_CPU=y
 # CONFIG_HP_SIMSCSI is not set
 
 #
-# Instrumentation Support
-#
-# CONFIG_PROFILING is not set
-# CONFIG_KPROBES is not set
-
-#
 # Kernel hacking
 #
 # CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=2048
 CONFIG_MAGIC_SYSRQ=y
 # CONFIG_UNUSED_SYMBOLS is not set
 # CONFIG_DEBUG_FS is not set
@@ -1375,10 +1478,14 @@ CONFIG_MAGIC_SYSRQ=y
 CONFIG_DEBUG_KERNEL=y
 # CONFIG_DEBUG_SHIRQ is not set
 CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
 CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
 # CONFIG_DEBUG_RT_MUTEXES is not set
 # CONFIG_RT_MUTEX_TESTER is not set
 # CONFIG_DEBUG_SPINLOCK is not set
@@ -1388,10 +1495,15 @@ CONFIG_DEBUG_MUTEXES=y
 # CONFIG_DEBUG_KOBJECT is not set
 # CONFIG_DEBUG_INFO is not set
 # CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+CONFIG_DEBUG_MEMORY_INIT=y
 # CONFIG_DEBUG_LIST is not set
-CONFIG_FORCED_INLINING=y
+# CONFIG_DEBUG_SG is not set
+# CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_FAULT_INJECTION is not set
+# CONFIG_SAMPLES is not set
 CONFIG_IA64_GRANULE_16MB=y
 # CONFIG_IA64_GRANULE_64MB is not set
 # CONFIG_IA64_PRINT_HAZARDS is not set
@@ -1405,41 +1517,85 @@ CONFIG_SYSVIPC_COMPAT=y
 #
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
 CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
 CONFIG_CRYPTO_ALGAPI=y
 CONFIG_CRYPTO_BLKCIPHER=m
 CONFIG_CRYPTO_MANAGER=m
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=m
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=m
+# CONFIG_CRYPTO_LRW is not set
+CONFIG_CRYPTO_PCBC=m
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
 # CONFIG_CRYPTO_HMAC is not set
 # CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_NULL is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
 # CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
 # CONFIG_CRYPTO_SHA1 is not set
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
 # CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-CONFIG_CRYPTO_ECB=m
-CONFIG_CRYPTO_CBC=m
-CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-CONFIG_CRYPTO_DES=m
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
 # CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
 # CONFIG_CRYPTO_CAST5 is not set
 # CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
+CONFIG_CRYPTO_DES=m
+# CONFIG_CRYPTO_FCRYPT is not set
 # CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
 # CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_TEST is not set
+# CONFIG_CRYPTO_LZO is not set
 CONFIG_CRYPTO_HW=y
+# CONFIG_CRYPTO_DEV_HIFN_795X is not set
diff --git a/arch/ia64/configs/sn2_defconfig b/arch/ia64/configs/sn2_defconfig
deleted file mode 100644
index 7f6b2377d13f..000000000000
--- a/arch/ia64/configs/sn2_defconfig
+++ /dev/null
@@ -1,1285 +0,0 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.23
-# Thu Oct 18 16:03:40 2007
-#
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-# CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-CONFIG_POSIX_MQUEUE=y
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_TASKSTATS=y
-# CONFIG_TASK_DELAY_ACCT is not set
-CONFIG_TASK_XACCT=y
-CONFIG_TASK_IO_ACCOUNTING=y
-# CONFIG_USER_NS is not set
-# CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
-CONFIG_LOG_BUF_SHIFT=20
-CONFIG_CGROUPS=y
-CONFIG_CPUSETS=y
-CONFIG_FAIR_GROUP_SCHED=y
-CONFIG_FAIR_USER_SCHED=y
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_RELAY=y
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-# CONFIG_EMBEDDED is not set
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-CONFIG_KALLSYMS_ALL=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_SLUB_DEBUG=y
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-# CONFIG_SLOB is not set
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-CONFIG_STOP_MACHINE=y
-CONFIG_BLOCK=y
-# CONFIG_BLK_DEV_IO_TRACE is not set
-CONFIG_BLK_DEV_BSG=y
-CONFIG_BLOCK_COMPAT=y
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-
-#
-# Processor type and features
-#
-CONFIG_IA64=y
-CONFIG_64BIT=y
-CONFIG_QUICKLIST=y
-CONFIG_MMU=y
-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_HUGETLB_PAGE_SIZE_VARIABLE=y
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_TIME_VSYSCALL=y
-CONFIG_DMI=y
-CONFIG_EFI=y
-CONFIG_GENERIC_IOMAP=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
-CONFIG_IA64_UNCACHED_ALLOCATOR=y
-CONFIG_AUDIT_ARCH=y
-# CONFIG_IA64_GENERIC is not set
-# CONFIG_IA64_DIG is not set
-# CONFIG_IA64_HP_ZX1 is not set
-# CONFIG_IA64_HP_ZX1_SWIOTLB is not set
-CONFIG_IA64_SGI_SN2=y
-# CONFIG_IA64_HP_SIM is not set
-# CONFIG_ITANIUM is not set
-CONFIG_MCKINLEY=y
-# CONFIG_IA64_PAGE_SIZE_4KB is not set
-# CONFIG_IA64_PAGE_SIZE_8KB is not set
-# CONFIG_IA64_PAGE_SIZE_16KB is not set
-CONFIG_IA64_PAGE_SIZE_64KB=y
-CONFIG_PGTABLE_3=y
-# CONFIG_PGTABLE_4 is not set
-# CONFIG_HZ_100 is not set
-CONFIG_HZ_250=y
-# CONFIG_HZ_300 is not set
-# CONFIG_HZ_1000 is not set
-CONFIG_HZ=250
-CONFIG_IA64_L1_CACHE_SHIFT=7
-# CONFIG_IA64_CYCLONE is not set
-CONFIG_IOSAPIC=y
-CONFIG_IA64_SGI_SN_XP=m
-CONFIG_FORCE_MAX_ZONEORDER=17
-CONFIG_SMP=y
-CONFIG_NR_CPUS=1024
-# CONFIG_HOTPLUG_CPU is not set
-CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
-CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
-CONFIG_SCHED_SMT=y
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-CONFIG_PREEMPT_BKL=y
-CONFIG_SELECT_MEMORY_MODEL=y
-# CONFIG_FLATMEM_MANUAL is not set
-CONFIG_DISCONTIGMEM_MANUAL=y
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_DISCONTIGMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_NEED_MULTIPLE_NODES=y
-# CONFIG_SPARSEMEM_STATIC is not set
-CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-CONFIG_MIGRATION=y
-CONFIG_RESOURCES_64BIT=y
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_NR_QUICK=1
-CONFIG_VIRT_TO_BUS=y
-CONFIG_ARCH_SELECT_MEMORY_MODEL=y
-CONFIG_ARCH_DISCONTIGMEM_ENABLE=y
-CONFIG_ARCH_FLATMEM_ENABLE=y
-CONFIG_ARCH_SPARSEMEM_ENABLE=y
-CONFIG_ARCH_DISCONTIGMEM_DEFAULT=y
-CONFIG_NUMA=y
-CONFIG_NODES_SHIFT=10
-CONFIG_ARCH_POPULATES_NODE_MAP=y
-CONFIG_VIRTUAL_MEM_MAP=y
-CONFIG_HOLES_IN_ZONE=y
-CONFIG_HAVE_ARCH_EARLY_PFN_TO_NID=y
-CONFIG_HAVE_ARCH_NODEDATA_EXTENSION=y
-CONFIG_IA32_SUPPORT=y
-CONFIG_COMPAT=y
-CONFIG_COMPAT_FOR_U64_ALIGNMENT=y
-CONFIG_IA64_MCA_RECOVERY=y
-CONFIG_PERFMON=y
-CONFIG_IA64_PALINFO=y
-CONFIG_IA64_MC_ERR_INJECT=y
-CONFIG_SGI_SN=y
-# CONFIG_IA64_ESI is not set
-# CONFIG_IA64_HP_AML_NFW is not set
-
-#
-# SN Devices
-#
-CONFIG_SGI_IOC3=y
-
-#
-# Firmware Drivers
-#
-CONFIG_EFI_VARS=y
-CONFIG_EFI_PCDP=y
-CONFIG_DMIID=y
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management and ACPI
-#
-CONFIG_PM=y
-# CONFIG_PM_LEGACY is not set
-# CONFIG_PM_DEBUG is not set
-CONFIG_ACPI=y
-# CONFIG_ACPI_PROCFS is not set
-CONFIG_ACPI_PROC_EVENT=y
-# CONFIG_ACPI_BUTTON is not set
-# CONFIG_ACPI_FAN is not set
-# CONFIG_ACPI_DOCK is not set
-# CONFIG_ACPI_PROCESSOR is not set
-CONFIG_ACPI_NUMA=y
-CONFIG_ACPI_BLACKLIST_YEAR=0
-# CONFIG_ACPI_DEBUG is not set
-CONFIG_ACPI_EC=y
-CONFIG_ACPI_POWER=y
-CONFIG_ACPI_SYSTEM=y
-# CONFIG_ACPI_CONTAINER is not set
-
-#
-# CPU Frequency scaling
-#
-# CONFIG_CPU_FREQ is not set
-
-#
-# Bus options (PCI, PCMCIA)
-#
-CONFIG_PCI=y
-CONFIG_PCI_DOMAINS=y
-CONFIG_PCI_SYSCALL=y
-CONFIG_PCIEPORTBUS=y
-CONFIG_HOTPLUG_PCI_PCIE=y
-CONFIG_PCIEAER=y
-CONFIG_ARCH_SUPPORTS_MSI=y
-# CONFIG_PCI_MSI is not set
-# CONFIG_PCI_DEBUG is not set
-CONFIG_HOTPLUG_PCI=y
-# CONFIG_HOTPLUG_PCI_FAKE is not set
-# CONFIG_HOTPLUG_PCI_ACPI is not set
-# CONFIG_HOTPLUG_PCI_CPCI is not set
-# CONFIG_HOTPLUG_PCI_SHPC is not set
-CONFIG_HOTPLUG_PCI_SGI=y
-# CONFIG_PCCARD is not set
-
-#
-# Networking
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
-CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
-# CONFIG_IP_PNP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-CONFIG_SYN_COOKIES=y
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-CONFIG_INET_TUNNEL=m
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
-CONFIG_INET_LRO=y
-CONFIG_INET_DIAG=m
-CONFIG_INET_TCP_DIAG=m
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
-CONFIG_IPV6=m
-# CONFIG_IPV6_PRIVACY is not set
-# CONFIG_IPV6_ROUTER_PREF is not set
-# CONFIG_IPV6_OPTIMISTIC_DAD is not set
-# CONFIG_INET6_AH is not set
-# CONFIG_INET6_ESP is not set
-# CONFIG_INET6_IPCOMP is not set
-# CONFIG_IPV6_MIP6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
-CONFIG_INET6_XFRM_MODE_TRANSPORT=m
-CONFIG_INET6_XFRM_MODE_TUNNEL=m
-CONFIG_INET6_XFRM_MODE_BEET=m
-# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
-CONFIG_IPV6_SIT=m
-# CONFIG_IPV6_TUNNEL is not set
-# CONFIG_IPV6_MULTIPLE_TABLES is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
-# CONFIG_MTD is not set
-# CONFIG_PARPORT is not set
-CONFIG_PNP=y
-# CONFIG_PNP_DEBUG is not set
-
-#
-# Protocols
-#
-CONFIG_PNPACPI=y
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_CRYPTOLOOP=m
-CONFIG_BLK_DEV_NBD=m
-# CONFIG_BLK_DEV_SX8 is not set
-# CONFIG_BLK_DEV_UB is not set
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
-# CONFIG_CDROM_PKTCDVD is not set
-CONFIG_ATA_OVER_ETH=m
-CONFIG_MISC_DEVICES=y
-# CONFIG_PHANTOM is not set
-# CONFIG_EEPROM_93CX6 is not set
-CONFIG_SGI_IOC4=y
-# CONFIG_TIFM_CORE is not set
-CONFIG_IDE=y
-CONFIG_IDE_MAX_HWIFS=4
-CONFIG_BLK_DEV_IDE=y
-
-#
-# Please see Documentation/ide.txt for help/info on IDE drives
-#
-# CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_BLK_DEV_IDEDISK=y
-# CONFIG_IDEDISK_MULTI_MODE is not set
-CONFIG_BLK_DEV_IDECD=y
-# CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_BLK_DEV_IDEFLOPPY is not set
-# CONFIG_BLK_DEV_IDESCSI is not set
-# CONFIG_BLK_DEV_IDEACPI is not set
-# CONFIG_IDE_TASK_IOCTL is not set
-CONFIG_IDE_PROC_FS=y
-
-#
-# IDE chipset support/bugfixes
-#
-CONFIG_IDE_GENERIC=y
-# CONFIG_BLK_DEV_PLATFORM is not set
-# CONFIG_BLK_DEV_IDEPNP is not set
-
-#
-# PCI IDE chipsets support
-#
-CONFIG_BLK_DEV_IDEPCI=y
-CONFIG_IDEPCI_SHARE_IRQ=y
-CONFIG_IDEPCI_PCIBUS_ORDER=y
-# CONFIG_BLK_DEV_OFFBOARD is not set
-# CONFIG_BLK_DEV_GENERIC is not set
-# CONFIG_BLK_DEV_OPTI621 is not set
-CONFIG_BLK_DEV_IDEDMA_PCI=y
-# CONFIG_BLK_DEV_AEC62XX is not set
-# CONFIG_BLK_DEV_ALI15X3 is not set
-# CONFIG_BLK_DEV_AMD74XX is not set
-# CONFIG_BLK_DEV_CMD64X is not set
-# CONFIG_BLK_DEV_TRIFLEX is not set
-# CONFIG_BLK_DEV_CY82C693 is not set
-# CONFIG_BLK_DEV_CS5520 is not set
-# CONFIG_BLK_DEV_CS5530 is not set
-# CONFIG_BLK_DEV_HPT34X is not set
-# CONFIG_BLK_DEV_HPT366 is not set
-# CONFIG_BLK_DEV_JMICRON is not set
-# CONFIG_BLK_DEV_SC1200 is not set
-# CONFIG_BLK_DEV_PIIX is not set
-# CONFIG_BLK_DEV_IT8213 is not set
-# CONFIG_BLK_DEV_IT821X is not set
-# CONFIG_BLK_DEV_NS87415 is not set
-# CONFIG_BLK_DEV_PDC202XX_OLD is not set
-# CONFIG_BLK_DEV_PDC202XX_NEW is not set
-# CONFIG_BLK_DEV_SVWKS is not set
-CONFIG_BLK_DEV_SGIIOC4=y
-# CONFIG_BLK_DEV_SIIMAGE is not set
-# CONFIG_BLK_DEV_SLC90E66 is not set
-# CONFIG_BLK_DEV_TRM290 is not set
-# CONFIG_BLK_DEV_VIA82CXXX is not set
-# CONFIG_BLK_DEV_TC86C001 is not set
-# CONFIG_IDE_ARM is not set
-CONFIG_BLK_DEV_IDEDMA=y
-# CONFIG_BLK_DEV_HD is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-CONFIG_SCSI_NETLINK=y
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
-CONFIG_BLK_DEV_SD=y
-CONFIG_CHR_DEV_ST=m
-# CONFIG_CHR_DEV_OSST is not set
-CONFIG_BLK_DEV_SR=m
-# CONFIG_BLK_DEV_SR_VENDOR is not set
-CONFIG_CHR_DEV_SG=m
-CONFIG_CHR_DEV_SCH=m
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-# CONFIG_SCSI_MULTI_LUN is not set
-CONFIG_SCSI_CONSTANTS=y
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-CONFIG_SCSI_SPI_ATTRS=y
-CONFIG_SCSI_FC_ATTRS=y
-CONFIG_SCSI_ISCSI_ATTRS=m
-CONFIG_SCSI_SAS_ATTRS=y
-CONFIG_SCSI_SAS_LIBSAS=y
-# CONFIG_SCSI_SAS_ATA is not set
-# CONFIG_SCSI_SAS_LIBSAS_DEBUG is not set
-CONFIG_SCSI_SRP_ATTRS=y
-CONFIG_SCSI_LOWLEVEL=y
-CONFIG_ISCSI_TCP=m
-# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
-# CONFIG_SCSI_3W_9XXX is not set
-# CONFIG_SCSI_ACARD is not set
-# CONFIG_SCSI_AACRAID is not set
-# CONFIG_SCSI_AIC7XXX is not set
-# CONFIG_SCSI_AIC7XXX_OLD is not set
-# CONFIG_SCSI_AIC79XX is not set
-# CONFIG_SCSI_AIC94XX is not set
-# CONFIG_SCSI_ADVANSYS is not set
-# CONFIG_SCSI_ARCMSR is not set
-# CONFIG_MEGARAID_NEWGEN is not set
-# CONFIG_MEGARAID_LEGACY is not set
-# CONFIG_MEGARAID_SAS is not set
-# CONFIG_SCSI_HPTIOP is not set
-# CONFIG_SCSI_DMX3191D is not set
-# CONFIG_SCSI_FUTURE_DOMAIN is not set
-# CONFIG_SCSI_IPS is not set
-# CONFIG_SCSI_INITIO is not set
-# CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_STEX is not set
-# CONFIG_SCSI_SYM53C8XX_2 is not set
-# CONFIG_SCSI_IPR is not set
-CONFIG_SCSI_QLOGIC_1280=y
-CONFIG_SCSI_QLA_FC=y
-# CONFIG_SCSI_QLA_ISCSI is not set
-# CONFIG_SCSI_LPFC is not set
-# CONFIG_SCSI_DC395x is not set
-# CONFIG_SCSI_DC390T is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_SCSI_SRP is not set
-CONFIG_ATA=y
-CONFIG_ATA_NONSTANDARD=y
-CONFIG_ATA_ACPI=y
-# CONFIG_SATA_AHCI is not set
-# CONFIG_SATA_SVW is not set
-# CONFIG_ATA_PIIX is not set
-# CONFIG_SATA_MV is not set
-# CONFIG_SATA_NV is not set
-# CONFIG_PDC_ADMA is not set
-# CONFIG_SATA_QSTOR is not set
-# CONFIG_SATA_PROMISE is not set
-# CONFIG_SATA_SX4 is not set
-# CONFIG_SATA_SIL is not set
-# CONFIG_SATA_SIL24 is not set
-# CONFIG_SATA_SIS is not set
-# CONFIG_SATA_ULI is not set
-# CONFIG_SATA_VIA is not set
-CONFIG_SATA_VITESSE=y
-# CONFIG_SATA_INIC162X is not set
-# CONFIG_PATA_ACPI is not set
-# CONFIG_PATA_ALI is not set
-# CONFIG_PATA_AMD is not set
-# CONFIG_PATA_ARTOP is not set
-# CONFIG_PATA_ATIIXP is not set
-# CONFIG_PATA_CMD640_PCI is not set
-# CONFIG_PATA_CMD64X is not set
-# CONFIG_PATA_CS5520 is not set
-# CONFIG_PATA_CS5530 is not set
-# CONFIG_PATA_CYPRESS is not set
-# CONFIG_PATA_EFAR is not set
-# CONFIG_ATA_GENERIC is not set
-# CONFIG_PATA_HPT366 is not set
-# CONFIG_PATA_HPT37X is not set
-# CONFIG_PATA_HPT3X2N is not set
-# CONFIG_PATA_HPT3X3 is not set
-# CONFIG_PATA_IT821X is not set
-# CONFIG_PATA_IT8213 is not set
-# CONFIG_PATA_JMICRON is not set
-# CONFIG_PATA_TRIFLEX is not set
-# CONFIG_PATA_MARVELL is not set
-# CONFIG_PATA_MPIIX is not set
-# CONFIG_PATA_OLDPIIX is not set
-# CONFIG_PATA_NETCELL is not set
-# CONFIG_PATA_NS87410 is not set
-# CONFIG_PATA_NS87415 is not set
-# CONFIG_PATA_OPTI is not set
-# CONFIG_PATA_OPTIDMA is not set
-# CONFIG_PATA_PDC_OLD is not set
-# CONFIG_PATA_RADISYS is not set
-# CONFIG_PATA_RZ1000 is not set
-# CONFIG_PATA_SC1200 is not set
-# CONFIG_PATA_SERVERWORKS is not set
-# CONFIG_PATA_PDC2027X is not set
-# CONFIG_PATA_SIL680 is not set
-# CONFIG_PATA_SIS is not set
-# CONFIG_PATA_VIA is not set
-# CONFIG_PATA_WINBOND is not set
-CONFIG_MD=y
-CONFIG_BLK_DEV_MD=y
-CONFIG_MD_LINEAR=y
-CONFIG_MD_RAID0=y
-CONFIG_MD_RAID1=y
-# CONFIG_MD_RAID10 is not set
-CONFIG_MD_RAID456=y
-# CONFIG_MD_RAID5_RESHAPE is not set
-CONFIG_MD_MULTIPATH=y
-# CONFIG_MD_FAULTY is not set
-CONFIG_BLK_DEV_DM=y
-# CONFIG_DM_DEBUG is not set
-CONFIG_DM_CRYPT=m
-CONFIG_DM_SNAPSHOT=m
-CONFIG_DM_MIRROR=m
-CONFIG_DM_ZERO=m
-CONFIG_DM_MULTIPATH=m
-CONFIG_DM_MULTIPATH_EMC=m
-# CONFIG_DM_MULTIPATH_RDAC is not set
-# CONFIG_DM_DELAY is not set
-CONFIG_FUSION=y
-CONFIG_FUSION_SPI=y
-CONFIG_FUSION_FC=y
-CONFIG_FUSION_SAS=y
-CONFIG_FUSION_MAX_SGE=128
-CONFIG_FUSION_CTL=m
-CONFIG_FUSION_LOGGING=y
-
-#
-# IEEE 1394 (FireWire) support
-#
-# CONFIG_FIREWIRE is not set
-# CONFIG_IEEE1394 is not set
-# CONFIG_I2O is not set
-CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_NET_SB1000 is not set
-# CONFIG_IP1000 is not set
-# CONFIG_ARCNET is not set
-# CONFIG_NET_ETHERNET is not set
-CONFIG_NETDEV_1000=y
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
-# CONFIG_E1000 is not set
-# CONFIG_E1000E is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
-# CONFIG_SIS190 is not set
-# CONFIG_SKGE is not set
-# CONFIG_SKY2 is not set
-# CONFIG_SK98LIN is not set
-# CONFIG_VIA_VELOCITY is not set
-CONFIG_TIGON3=y
-# CONFIG_BNX2 is not set
-# CONFIG_QLA3XXX is not set
-# CONFIG_ATL1 is not set
-CONFIG_NETDEV_10000=y
-CONFIG_CHELSIO_T1=m
-CONFIG_CHELSIO_T1_1G=y
-# CONFIG_CHELSIO_T1_NAPI is not set
-CONFIG_CHELSIO_T3=m
-CONFIG_IXGBE=m
-# CONFIG_IXGB is not set
-CONFIG_S2IO=m
-# CONFIG_S2IO_NAPI is not set
-# CONFIG_MYRI10GE is not set
-# CONFIG_NETXEN_NIC is not set
-# CONFIG_NIU is not set
-# CONFIG_MLX4_CORE is not set
-# CONFIG_TEHUTI is not set
-# CONFIG_TR is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET_MII is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_WAN is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NET_FC is not set
-# CONFIG_SHAPER is not set
-CONFIG_NETCONSOLE=y
-# CONFIG_NETCONSOLE_DYNAMIC is not set
-CONFIG_NETPOLL=y
-# CONFIG_NETPOLL_TRAP is not set
-CONFIG_NET_POLL_CONTROLLER=y
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-# CONFIG_VT_UNICODE is not set
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_SERIAL_NONSTANDARD=y
-# CONFIG_COMPUTONE is not set
-# CONFIG_ROCKETPORT is not set
-# CONFIG_CYCLADES is not set
-# CONFIG_DIGIEPCA is not set
-# CONFIG_MOXA_INTELLIO is not set
-# CONFIG_MOXA_SMARTIO is not set
-# CONFIG_MOXA_SMARTIO_NEW is not set
-# CONFIG_ISI is not set
-# CONFIG_SYNCLINKMP is not set
-# CONFIG_SYNCLINK_GT is not set
-# CONFIG_N_HDLC is not set
-# CONFIG_SPECIALIX is not set
-# CONFIG_SX is not set
-# CONFIG_RIO is not set
-# CONFIG_STALDRV is not set
-CONFIG_SGI_SNSC=y
-CONFIG_SGI_TIOCX=y
-CONFIG_SGI_MBCS=m
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_SERIAL_SGI_L1_CONSOLE=y
-# CONFIG_SERIAL_JSM is not set
-CONFIG_SERIAL_SGI_IOC4=y
-CONFIG_SERIAL_SGI_IOC3=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_IPMI_HANDLER is not set
-# CONFIG_WATCHDOG is not set
-# CONFIG_HW_RANDOM is not set
-CONFIG_EFI_RTC=y
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-CONFIG_RAW_DRIVER=m
-CONFIG_MAX_RAW_DEVS=256
-# CONFIG_HPET is not set
-# CONFIG_HANGCHECK_TIMER is not set
-CONFIG_MMTIMER=y
-# CONFIG_TCG_TPM is not set
-CONFIG_DEVPORT=y
-# CONFIG_I2C is not set
-
-#
-# SPI support
-#
-# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
-# CONFIG_HWMON is not set
-
-#
-# Sonics Silicon Backplane
-#
-CONFIG_SSB_POSSIBLE=y
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_SM501 is not set
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_DAB is not set
-
-#
-# Graphics support
-#
-CONFIG_AGP=y
-CONFIG_AGP_SGI_TIOCA=y
-# CONFIG_DRM is not set
-# CONFIG_VGASTATE is not set
-CONFIG_VIDEO_OUTPUT_CONTROL=m
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
-CONFIG_VGA_CONSOLE=y
-# CONFIG_VGACON_SOFT_SCROLLBACK is not set
-CONFIG_DUMMY_CONSOLE=y
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-CONFIG_HID_DEBUG=y
-# CONFIG_HIDRAW is not set
-
-#
-# USB Input Devices
-#
-CONFIG_USB_HID=m
-# CONFIG_USB_HIDINPUT_POWERBOOK is not set
-# CONFIG_HID_FF is not set
-# CONFIG_USB_HIDDEV is not set
-
-#
-# USB HID Boot Protocol drivers
-#
-# CONFIG_USB_KBD is not set
-# CONFIG_USB_MOUSE is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-CONFIG_USB_ARCH_HAS_EHCI=y
-CONFIG_USB=m
-# CONFIG_USB_DEBUG is not set
-
-#
-# Miscellaneous USB options
-#
-# CONFIG_USB_DEVICEFS is not set
-CONFIG_USB_DEVICE_CLASS=y
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_SUSPEND is not set
-# CONFIG_USB_PERSIST is not set
-# CONFIG_USB_OTG is not set
-
-#
-# USB Host Controller Drivers
-#
-CONFIG_USB_EHCI_HCD=m
-# CONFIG_USB_EHCI_SPLIT_ISO is not set
-# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
-# CONFIG_USB_EHCI_TT_NEWSCHED is not set
-# CONFIG_USB_ISP116X_HCD is not set
-CONFIG_USB_OHCI_HCD=m
-# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
-# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-CONFIG_USB_UHCI_HCD=m
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# may also be needed; see USB_STORAGE Help for more information
-#
-# CONFIG_USB_STORAGE is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-CONFIG_USB_MON=y
-
-#
-# USB port drivers
-#
-
-#
-# USB Serial Converter support
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_AUERSWALD is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_SISUSBVGA is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-
-#
-# USB DSL modem support
-#
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-# CONFIG_MMC is not set
-# CONFIG_NEW_LEDS is not set
-CONFIG_INFINIBAND=m
-# CONFIG_INFINIBAND_USER_MAD is not set
-CONFIG_INFINIBAND_USER_ACCESS=m
-CONFIG_INFINIBAND_USER_MEM=y
-CONFIG_INFINIBAND_ADDR_TRANS=y
-CONFIG_INFINIBAND_MTHCA=m
-CONFIG_INFINIBAND_MTHCA_DEBUG=y
-# CONFIG_INFINIBAND_AMSO1100 is not set
-# CONFIG_INFINIBAND_CXGB3 is not set
-# CONFIG_MLX4_INFINIBAND is not set
-CONFIG_INFINIBAND_IPOIB=m
-# CONFIG_INFINIBAND_IPOIB_CM is not set
-CONFIG_INFINIBAND_IPOIB_DEBUG=y
-# CONFIG_INFINIBAND_IPOIB_DEBUG_DATA is not set
-CONFIG_INFINIBAND_SRP=m
-# CONFIG_INFINIBAND_ISER is not set
-# CONFIG_RTC_CLASS is not set
-
-#
-# Userspace I/O
-#
-# CONFIG_UIO is not set
-CONFIG_MSPEC=y
-
-#
-# File systems
-#
-CONFIG_EXT2_FS=y
-CONFIG_EXT2_FS_XATTR=y
-CONFIG_EXT2_FS_POSIX_ACL=y
-CONFIG_EXT2_FS_SECURITY=y
-# CONFIG_EXT2_FS_XIP is not set
-CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_XATTR=y
-CONFIG_EXT3_FS_POSIX_ACL=y
-CONFIG_EXT3_FS_SECURITY=y
-# CONFIG_EXT4DEV_FS is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-CONFIG_FS_MBCACHE=y
-CONFIG_REISERFS_FS=y
-# CONFIG_REISERFS_CHECK is not set
-# CONFIG_REISERFS_PROC_INFO is not set
-CONFIG_REISERFS_FS_XATTR=y
-CONFIG_REISERFS_FS_POSIX_ACL=y
-CONFIG_REISERFS_FS_SECURITY=y
-# CONFIG_JFS_FS is not set
-CONFIG_FS_POSIX_ACL=y
-CONFIG_XFS_FS=y
-CONFIG_XFS_QUOTA=y
-# CONFIG_XFS_SECURITY is not set
-CONFIG_XFS_POSIX_ACL=y
-CONFIG_XFS_RT=y
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-CONFIG_QUOTA=y
-CONFIG_QUOTA_NETLINK_INTERFACE=y
-CONFIG_PRINT_QUOTA_WARNING=y
-# CONFIG_QFMT_V1 is not set
-# CONFIG_QFMT_V2 is not set
-CONFIG_QUOTACTL=y
-CONFIG_DNOTIFY=y
-CONFIG_AUTOFS_FS=m
-CONFIG_AUTOFS4_FS=m
-CONFIG_FUSE_FS=m
-
-#
-# CD-ROM/DVD Filesystems
-#
-CONFIG_ISO9660_FS=y
-CONFIG_JOLIET=y
-# CONFIG_ZISOFS is not set
-CONFIG_UDF_FS=m
-CONFIG_UDF_NLS=y
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
-# CONFIG_MSDOS_FS is not set
-CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_KCORE=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
-CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-CONFIG_HUGETLBFS=y
-CONFIG_HUGETLB_PAGE=y
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
-CONFIG_NFS_FS=m
-CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-CONFIG_NFS_V4=y
-CONFIG_NFS_DIRECTIO=y
-CONFIG_NFSD=m
-CONFIG_NFSD_V3=y
-# CONFIG_NFSD_V3_ACL is not set
-CONFIG_NFSD_V4=y
-CONFIG_NFSD_TCP=y
-CONFIG_LOCKD=m
-CONFIG_LOCKD_V4=y
-CONFIG_EXPORTFS=m
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=m
-CONFIG_SUNRPC_GSS=m
-CONFIG_SUNRPC_XPRT_RDMA=m
-# CONFIG_SUNRPC_BIND34 is not set
-CONFIG_RPCSEC_GSS_KRB5=m
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-CONFIG_SMB_FS=m
-# CONFIG_SMB_NLS_DEFAULT is not set
-CONFIG_CIFS=m
-# CONFIG_CIFS_STATS is not set
-# CONFIG_CIFS_WEAK_PW_HASH is not set
-# CONFIG_CIFS_XATTR is not set
-# CONFIG_CIFS_DEBUG2 is not set
-# CONFIG_CIFS_EXPERIMENTAL is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-CONFIG_SGI_PARTITION=y
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-CONFIG_EFI_PARTITION=y
-# CONFIG_SYSV68_PARTITION is not set
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
-CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
-CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-CONFIG_NLS_UTF8=y
-# CONFIG_DLM is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-# CONFIG_CRC_CCITT is not set
-CONFIG_CRC16=m
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-CONFIG_LIBCRC32C=m
-CONFIG_ZLIB_INFLATE=m
-CONFIG_ZLIB_DEFLATE=m
-CONFIG_GENERIC_ALLOCATOR=y
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_GENERIC_PENDING_IRQ=y
-CONFIG_IRQ_PER_CPU=y
-
-#
-# Instrumentation Support
-#
-# CONFIG_PROFILING is not set
-# CONFIG_KPROBES is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_MAGIC_SYSRQ=y
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
-CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_SLUB_DEBUG_ON is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_LIST is not set
-CONFIG_FORCED_INLINING=y
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
-# CONFIG_FAULT_INJECTION is not set
-CONFIG_IA64_GRANULE_16MB=y
-# CONFIG_IA64_GRANULE_64MB is not set
-# CONFIG_IA64_PRINT_HAZARDS is not set
-# CONFIG_DISABLE_VHPT is not set
-# CONFIG_IA64_DEBUG_CMPXCHG is not set
-# CONFIG_IA64_DEBUG_IRQ is not set
-CONFIG_SYSVIPC_COMPAT=y
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_XOR_BLOCKS=y
-CONFIG_ASYNC_CORE=y
-CONFIG_ASYNC_MEMCPY=y
-CONFIG_ASYNC_XOR=y
-CONFIG_CRYPTO=y
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_BLKCIPHER=m
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_HMAC=y
-# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_MD4 is not set
-CONFIG_CRYPTO_MD5=y
-CONFIG_CRYPTO_SHA1=m
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-CONFIG_CRYPTO_ECB=m
-CONFIG_CRYPTO_CBC=m
-CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_XTS is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-CONFIG_CRYPTO_DES=m
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_SEED is not set
-CONFIG_CRYPTO_DEFLATE=m
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-CONFIG_CRYPTO_CRC32C=m
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_TEST is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_HW is not set
diff --git a/arch/ia64/hp/common/hwsw_iommu.c b/arch/ia64/hp/common/hwsw_iommu.c
index 1c44ec2a1d58..88b6e6f3fd88 100644
--- a/arch/ia64/hp/common/hwsw_iommu.c
+++ b/arch/ia64/hp/common/hwsw_iommu.c
@@ -186,9 +186,10 @@ hwsw_dma_supported (struct device *dev, u64 mask)
 }
 
 int
-hwsw_dma_mapping_error (dma_addr_t dma_addr)
+hwsw_dma_mapping_error(struct device *dev, dma_addr_t dma_addr)
 {
-	return hwiommu_dma_mapping_error (dma_addr) || swiotlb_dma_mapping_error(dma_addr);
+	return hwiommu_dma_mapping_error(dev, dma_addr) ||
+		swiotlb_dma_mapping_error(dev, dma_addr);
 }
 
 EXPORT_SYMBOL(hwsw_dma_mapping_error);
diff --git a/arch/ia64/hp/common/sba_iommu.c b/arch/ia64/hp/common/sba_iommu.c
index 34421aed1e2a..4956be40d7b5 100644
--- a/arch/ia64/hp/common/sba_iommu.c
+++ b/arch/ia64/hp/common/sba_iommu.c
@@ -2147,7 +2147,7 @@ sba_dma_supported (struct device *dev, u64 mask)
 }
 
 int
-sba_dma_mapping_error (dma_addr_t dma_addr)
+sba_dma_mapping_error(struct device *dev, dma_addr_t dma_addr)
 {
 	return 0;
 }
diff --git a/arch/ia64/ia32/ia32_entry.S b/arch/ia64/ia32/ia32_entry.S
index 06efd1f9b800..ff88c48c5d19 100644
--- a/arch/ia64/ia32/ia32_entry.S
+++ b/arch/ia64/ia32/ia32_entry.S
@@ -262,7 +262,7 @@ ia32_syscall_table:
 	data8 sys_uselib
 	data8 sys_swapon
 	data8 sys_reboot
-	data8 sys32_readdir
+	data8 compat_sys_old_readdir
 	data8 sys32_mmap	  /* 90 */
 	data8 sys32_munmap
 	data8 sys_truncate
diff --git a/arch/ia64/ia32/ia32priv.h b/arch/ia64/ia32/ia32priv.h
index c5c872b250da..dd0c53687a96 100644
--- a/arch/ia64/ia32/ia32priv.h
+++ b/arch/ia64/ia32/ia32priv.h
@@ -276,13 +276,6 @@ typedef struct compat_siginfo {
 	} _sifields;
 } compat_siginfo_t;
 
-struct old_linux32_dirent {
-	u32	d_ino;
-	u32	d_offset;
-	u16	d_namlen;
-	char	d_name[1];
-};
-
 /*
  * IA-32 ELF specific definitions for IA-64.
  */
diff --git a/arch/ia64/ia32/sys_ia32.c b/arch/ia64/ia32/sys_ia32.c
index 465116aecb85..bf196cbb3796 100644
--- a/arch/ia64/ia32/sys_ia32.c
+++ b/arch/ia64/ia32/sys_ia32.c
@@ -1210,138 +1210,6 @@ sys32_settimeofday (struct compat_timeval __user *tv, struct timezone __user *tz
 	return do_sys_settimeofday(tv ? &kts : NULL, tz ? &ktz : NULL);
 }
 
-struct getdents32_callback {
-	struct compat_dirent __user *current_dir;
-	struct compat_dirent __user *previous;
-	int count;
-	int error;
-};
-
-struct readdir32_callback {
-	struct old_linux32_dirent __user * dirent;
-	int count;
-};
-
-static int
-filldir32 (void *__buf, const char *name, int namlen, loff_t offset, u64 ino,
-	   unsigned int d_type)
-{
-	struct compat_dirent __user * dirent;
-	struct getdents32_callback * buf = (struct getdents32_callback *) __buf;
-	int reclen = ROUND_UP(offsetof(struct compat_dirent, d_name) + namlen + 1, 4);
-	u32 d_ino;
-
-	buf->error = -EINVAL;	/* only used if we fail.. */
-	if (reclen > buf->count)
-		return -EINVAL;
-	d_ino = ino;
-	if (sizeof(d_ino) < sizeof(ino) && d_ino != ino)
-		return -EOVERFLOW;
-	buf->error = -EFAULT;	/* only used if we fail.. */
-	dirent = buf->previous;
-	if (dirent)
-		if (put_user(offset, &dirent->d_off))
-			return -EFAULT;
-	dirent = buf->current_dir;
-	buf->previous = dirent;
-	if (put_user(d_ino, &dirent->d_ino)
-	    || put_user(reclen, &dirent->d_reclen)
-	    || copy_to_user(dirent->d_name, name, namlen)
-	    || put_user(0, dirent->d_name + namlen))
-		return -EFAULT;
-	dirent = (struct compat_dirent __user *) ((char __user *) dirent + reclen);
-	buf->current_dir = dirent;
-	buf->count -= reclen;
-	return 0;
-}
-
-asmlinkage long
-sys32_getdents (unsigned int fd, struct compat_dirent __user *dirent, unsigned int count)
-{
-	struct file * file;
-	struct compat_dirent __user * lastdirent;
-	struct getdents32_callback buf;
-	int error;
-
-	error = -EFAULT;
-	if (!access_ok(VERIFY_WRITE, dirent, count))
-		goto out;
-
-	error = -EBADF;
-	file = fget(fd);
-	if (!file)
-		goto out;
-
-	buf.current_dir = dirent;
-	buf.previous = NULL;
-	buf.count = count;
-	buf.error = 0;
-
-	error = vfs_readdir(file, filldir32, &buf);
-	if (error < 0)
-		goto out_putf;
-	error = buf.error;
-	lastdirent = buf.previous;
-	if (lastdirent) {
-		if (put_user(file->f_pos, &lastdirent->d_off))
-			error = -EFAULT;
-		else
-			error = count - buf.count;
-	}
-
-out_putf:
-	fput(file);
-out:
-	return error;
-}
-
-static int
-fillonedir32 (void * __buf, const char * name, int namlen, loff_t offset, u64 ino,
-	      unsigned int d_type)
-{
-	struct readdir32_callback * buf = (struct readdir32_callback *) __buf;
-	struct old_linux32_dirent __user * dirent;
-	u32 d_ino;
-
-	if (buf->count)
-		return -EINVAL;
-	d_ino = ino;
-	if (sizeof(d_ino) < sizeof(ino) && d_ino != ino)
-		return -EOVERFLOW;
-	buf->count++;
-	dirent = buf->dirent;
-	if (put_user(d_ino, &dirent->d_ino)
-	    || put_user(offset, &dirent->d_offset)
-	    || put_user(namlen, &dirent->d_namlen)
-	    || copy_to_user(dirent->d_name, name, namlen)
-	    || put_user(0, dirent->d_name + namlen))
-		return -EFAULT;
-	return 0;
-}
-
-asmlinkage long
-sys32_readdir (unsigned int fd, void __user *dirent, unsigned int count)
-{
-	int error;
-	struct file * file;
-	struct readdir32_callback buf;
-
-	error = -EBADF;
-	file = fget(fd);
-	if (!file)
-		goto out;
-
-	buf.count = 0;
-	buf.dirent = dirent;
-
-	error = vfs_readdir(file, fillonedir32, &buf);
-	if (error >= 0)
-		error = buf.count;
-	fput(file);
-out:
-	return error;
-}
-
 struct sel_arg_struct {
 	unsigned int n;
 	unsigned int inp;
diff --git a/include/asm-ia64/Kbuild b/arch/ia64/include/asm/Kbuild
index ccbe8ae47a61..ccbe8ae47a61 100644
--- a/include/asm-ia64/Kbuild
+++ b/arch/ia64/include/asm/Kbuild
diff --git a/include/asm-ia64/a.out.h b/arch/ia64/include/asm/a.out.h
index 193dcfb67596..193dcfb67596 100644
--- a/include/asm-ia64/a.out.h
+++ b/arch/ia64/include/asm/a.out.h
diff --git a/include/asm-ia64/acpi-ext.h b/arch/ia64/include/asm/acpi-ext.h
index 734d137dda6e..734d137dda6e 100644
--- a/include/asm-ia64/acpi-ext.h
+++ b/arch/ia64/include/asm/acpi-ext.h
diff --git a/include/asm-ia64/acpi.h b/arch/ia64/include/asm/acpi.h
index fcfad326f4c7..0f82cc2934e1 100644
--- a/include/asm-ia64/acpi.h
+++ b/arch/ia64/include/asm/acpi.h
@@ -1,6 +1,4 @@
 /*
- *  asm-ia64/acpi.h
- *
  *  Copyright (C) 1999 VA Linux Systems
  *  Copyright (C) 1999 Walt Drummond <drummond@valinux.com>
  *  Copyright (C) 2000,2001 J.I. Lee <jung-ik.lee@intel.com>
diff --git a/include/asm-ia64/agp.h b/arch/ia64/include/asm/agp.h
index c11fdd8ab4d7..c11fdd8ab4d7 100644
--- a/include/asm-ia64/agp.h
+++ b/arch/ia64/include/asm/agp.h
diff --git a/include/asm-ia64/asmmacro.h b/arch/ia64/include/asm/asmmacro.h
index c1642fd64029..c1642fd64029 100644
--- a/include/asm-ia64/asmmacro.h
+++ b/arch/ia64/include/asm/asmmacro.h
diff --git a/include/asm-ia64/atomic.h b/arch/ia64/include/asm/atomic.h
index 50c2b83fd5a0..50c2b83fd5a0 100644
--- a/include/asm-ia64/atomic.h
+++ b/arch/ia64/include/asm/atomic.h
diff --git a/include/asm-ia64/auxvec.h b/arch/ia64/include/asm/auxvec.h
index 23cebe5685b9..23cebe5685b9 100644
--- a/include/asm-ia64/auxvec.h
+++ b/arch/ia64/include/asm/auxvec.h
diff --git a/include/asm-ia64/bitops.h b/arch/ia64/include/asm/bitops.h
index e2ca80037335..e2ca80037335 100644
--- a/include/asm-ia64/bitops.h
+++ b/arch/ia64/include/asm/bitops.h
diff --git a/include/asm-ia64/break.h b/arch/ia64/include/asm/break.h
index f03402039896..f03402039896 100644
--- a/include/asm-ia64/break.h
+++ b/arch/ia64/include/asm/break.h
diff --git a/include/asm-ia64/bug.h b/arch/ia64/include/asm/bug.h
index 823616b5020b..823616b5020b 100644
--- a/include/asm-ia64/bug.h
+++ b/arch/ia64/include/asm/bug.h
diff --git a/include/asm-ia64/bugs.h b/arch/ia64/include/asm/bugs.h
index 433523e3b2ed..433523e3b2ed 100644
--- a/include/asm-ia64/bugs.h
+++ b/arch/ia64/include/asm/bugs.h
diff --git a/include/asm-ia64/byteorder.h b/arch/ia64/include/asm/byteorder.h
index 69bd41d7c26e..69bd41d7c26e 100644
--- a/include/asm-ia64/byteorder.h
+++ b/arch/ia64/include/asm/byteorder.h
diff --git a/include/asm-ia64/cache.h b/arch/ia64/include/asm/cache.h
index e7482bd628ff..e7482bd628ff 100644
--- a/include/asm-ia64/cache.h
+++ b/arch/ia64/include/asm/cache.h
diff --git a/include/asm-ia64/cacheflush.h b/arch/ia64/include/asm/cacheflush.h
index afcfbda76e20..afcfbda76e20 100644
--- a/include/asm-ia64/cacheflush.h
+++ b/arch/ia64/include/asm/cacheflush.h
diff --git a/include/asm-ia64/checksum.h b/arch/ia64/include/asm/checksum.h
index 97af155057e4..97af155057e4 100644
--- a/include/asm-ia64/checksum.h
+++ b/arch/ia64/include/asm/checksum.h
diff --git a/include/asm-ia64/compat.h b/arch/ia64/include/asm/compat.h
index dfcf75b8426d..dfcf75b8426d 100644
--- a/include/asm-ia64/compat.h
+++ b/arch/ia64/include/asm/compat.h
diff --git a/include/asm-ia64/cpu.h b/arch/ia64/include/asm/cpu.h
index fcca30b9f110..fcca30b9f110 100644
--- a/include/asm-ia64/cpu.h
+++ b/arch/ia64/include/asm/cpu.h
diff --git a/arch/ia64/include/asm/cputime.h b/arch/ia64/include/asm/cputime.h
new file mode 100644
index 000000000000..d20b998cb91d
--- /dev/null
+++ b/arch/ia64/include/asm/cputime.h
@@ -0,0 +1,109 @@
+/*
+ * Definitions for measuring cputime on ia64 machines.
+ *
+ * Based on <asm-powerpc/cputime.h>.
+ *
+ * Copyright (C) 2007 FUJITSU LIMITED
+ * Copyright (C) 2007 Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ *
+ * If we have CONFIG_VIRT_CPU_ACCOUNTING, we measure cpu time in nsec.
+ * Otherwise we measure cpu time in jiffies using the generic definitions.
+ */
+
+#ifndef __IA64_CPUTIME_H
+#define __IA64_CPUTIME_H
+
+#ifndef CONFIG_VIRT_CPU_ACCOUNTING
+#include <asm-generic/cputime.h>
+#else
+
+#include <linux/time.h>
+#include <linux/jiffies.h>
+#include <asm/processor.h>
+
+typedef u64 cputime_t;
+typedef u64 cputime64_t;
+
+#define cputime_zero			((cputime_t)0)
+#define cputime_max			((~((cputime_t)0) >> 1) - 1)
+#define cputime_add(__a, __b)		((__a) +  (__b))
+#define cputime_sub(__a, __b)		((__a) -  (__b))
+#define cputime_div(__a, __n)		((__a) /  (__n))
+#define cputime_halve(__a)		((__a) >> 1)
+#define cputime_eq(__a, __b)		((__a) == (__b))
+#define cputime_gt(__a, __b)		((__a) >  (__b))
+#define cputime_ge(__a, __b)		((__a) >= (__b))
+#define cputime_lt(__a, __b)		((__a) <  (__b))
+#define cputime_le(__a, __b)		((__a) <= (__b))
+
+#define cputime64_zero			((cputime64_t)0)
+#define cputime64_add(__a, __b)		((__a) + (__b))
+#define cputime64_sub(__a, __b)		((__a) - (__b))
+#define cputime_to_cputime64(__ct)	(__ct)
+
+/*
+ * Convert cputime <-> jiffies (HZ)
+ */
+#define cputime_to_jiffies(__ct)	((__ct) / (NSEC_PER_SEC / HZ))
+#define jiffies_to_cputime(__jif)	((__jif) * (NSEC_PER_SEC / HZ))
+#define cputime64_to_jiffies64(__ct)	((__ct) / (NSEC_PER_SEC / HZ))
+#define jiffies64_to_cputime64(__jif)	((__jif) * (NSEC_PER_SEC / HZ))
+
+/*
+ * Convert cputime <-> milliseconds
+ */
+#define cputime_to_msecs(__ct)		((__ct) / NSEC_PER_MSEC)
+#define msecs_to_cputime(__msecs)	((__msecs) * NSEC_PER_MSEC)
+
+/*
+ * Convert cputime <-> seconds
+ */
+#define cputime_to_secs(__ct)		((__ct) / NSEC_PER_SEC)
+#define secs_to_cputime(__secs)		((__secs) * NSEC_PER_SEC)
+
+/*
+ * Convert cputime <-> timespec (nsec)
+ */
+static inline cputime_t timespec_to_cputime(const struct timespec *val)
+{
+	cputime_t ret = val->tv_sec * NSEC_PER_SEC;
+	return (ret + val->tv_nsec);
+}
+static inline void cputime_to_timespec(const cputime_t ct, struct timespec *val)
+{
+	val->tv_sec  = ct / NSEC_PER_SEC;
+	val->tv_nsec = ct % NSEC_PER_SEC;
+}
+
+/*
+ * Convert cputime <-> timeval (msec)
+ */
+static inline cputime_t timeval_to_cputime(struct timeval *val)
+{
+	cputime_t ret = val->tv_sec * NSEC_PER_SEC;
+	return (ret + val->tv_usec * NSEC_PER_USEC);
+}
+static inline void cputime_to_timeval(const cputime_t ct, struct timeval *val)
+{
+	val->tv_sec = ct / NSEC_PER_SEC;
+	val->tv_usec = (ct % NSEC_PER_SEC) / NSEC_PER_USEC;
+}
+
+/*
+ * Convert cputime <-> clock (USER_HZ)
+ */
+#define cputime_to_clock_t(__ct)	((__ct) / (NSEC_PER_SEC / USER_HZ))
+#define clock_t_to_cputime(__x)		((__x) * (NSEC_PER_SEC / USER_HZ))
+
+/*
+ * Convert cputime64 to clock.
+ */
+#define cputime64_to_clock_t(__ct)      cputime_to_clock_t((cputime_t)__ct)
+
+#endif /* CONFIG_VIRT_CPU_ACCOUNTING */
+#endif /* __IA64_CPUTIME_H */
diff --git a/include/asm-ia64/current.h b/arch/ia64/include/asm/current.h
index c659f90fbfd9..c659f90fbfd9 100644
--- a/include/asm-ia64/current.h
+++ b/arch/ia64/include/asm/current.h
diff --git a/include/asm-ia64/cyclone.h b/arch/ia64/include/asm/cyclone.h
index 88f6500e84ab..88f6500e84ab 100644
--- a/include/asm-ia64/cyclone.h
+++ b/arch/ia64/include/asm/cyclone.h
diff --git a/include/asm-ia64/delay.h b/arch/ia64/include/asm/delay.h
index a30a62f235e1..a30a62f235e1 100644
--- a/include/asm-ia64/delay.h
+++ b/arch/ia64/include/asm/delay.h
diff --git a/include/asm-ia64/device.h b/arch/ia64/include/asm/device.h
index 3db6daf7f251..3db6daf7f251 100644
--- a/include/asm-ia64/device.h
+++ b/arch/ia64/include/asm/device.h
diff --git a/include/asm-ia64/div64.h b/arch/ia64/include/asm/div64.h
index 6cd978cefb28..6cd978cefb28 100644
--- a/include/asm-ia64/div64.h
+++ b/arch/ia64/include/asm/div64.h
diff --git a/include/asm-ia64/dma-mapping.h b/arch/ia64/include/asm/dma-mapping.h
index 9f0df9bd46b7..9f0df9bd46b7 100644
--- a/include/asm-ia64/dma-mapping.h
+++ b/arch/ia64/include/asm/dma-mapping.h
diff --git a/include/asm-ia64/dma.h b/arch/ia64/include/asm/dma.h
index 4d97f60f1ef5..4d97f60f1ef5 100644
--- a/include/asm-ia64/dma.h
+++ b/arch/ia64/include/asm/dma.h
diff --git a/include/asm-ia64/dmi.h b/arch/ia64/include/asm/dmi.h
index 00eb1b130b63..00eb1b130b63 100644
--- a/include/asm-ia64/dmi.h
+++ b/arch/ia64/include/asm/dmi.h
diff --git a/include/asm-ia64/elf.h b/arch/ia64/include/asm/elf.h
index 5e0c1a6bce8d..5e0c1a6bce8d 100644
--- a/include/asm-ia64/elf.h
+++ b/arch/ia64/include/asm/elf.h
diff --git a/include/asm-ia64/emergency-restart.h b/arch/ia64/include/asm/emergency-restart.h
index 108d8c48e42e..108d8c48e42e 100644
--- a/include/asm-ia64/emergency-restart.h
+++ b/arch/ia64/include/asm/emergency-restart.h
diff --git a/include/asm-ia64/errno.h b/arch/ia64/include/asm/errno.h
index 4c82b503d92f..4c82b503d92f 100644
--- a/include/asm-ia64/errno.h
+++ b/arch/ia64/include/asm/errno.h
diff --git a/include/asm-ia64/esi.h b/arch/ia64/include/asm/esi.h
index 40991c6ba647..40991c6ba647 100644
--- a/include/asm-ia64/esi.h
+++ b/arch/ia64/include/asm/esi.h
diff --git a/include/asm-ia64/fb.h b/arch/ia64/include/asm/fb.h
index 89a397cee90a..89a397cee90a 100644
--- a/include/asm-ia64/fb.h
+++ b/arch/ia64/include/asm/fb.h
diff --git a/include/asm-ia64/fcntl.h b/arch/ia64/include/asm/fcntl.h
index 1dd275dc8f65..1dd275dc8f65 100644
--- a/include/asm-ia64/fcntl.h
+++ b/arch/ia64/include/asm/fcntl.h
diff --git a/include/asm-ia64/fpswa.h b/arch/ia64/include/asm/fpswa.h
index 62edfceadaa6..62edfceadaa6 100644
--- a/include/asm-ia64/fpswa.h
+++ b/arch/ia64/include/asm/fpswa.h
diff --git a/include/asm-ia64/fpu.h b/arch/ia64/include/asm/fpu.h
index 3859558ff0a4..3859558ff0a4 100644
--- a/include/asm-ia64/fpu.h
+++ b/arch/ia64/include/asm/fpu.h
diff --git a/include/asm-ia64/futex.h b/arch/ia64/include/asm/futex.h
index c7f0f062239c..c7f0f062239c 100644
--- a/include/asm-ia64/futex.h
+++ b/arch/ia64/include/asm/futex.h
diff --git a/include/asm-ia64/gcc_intrin.h b/arch/ia64/include/asm/gcc_intrin.h
index 0f5b55921758..0f5b55921758 100644
--- a/include/asm-ia64/gcc_intrin.h
+++ b/arch/ia64/include/asm/gcc_intrin.h
diff --git a/include/asm-ia64/hardirq.h b/arch/ia64/include/asm/hardirq.h
index 140e495b8e0e..140e495b8e0e 100644
--- a/include/asm-ia64/hardirq.h
+++ b/arch/ia64/include/asm/hardirq.h
diff --git a/include/asm-ia64/hpsim.h b/arch/ia64/include/asm/hpsim.h
index 892ab198a9da..892ab198a9da 100644
--- a/include/asm-ia64/hpsim.h
+++ b/arch/ia64/include/asm/hpsim.h
diff --git a/include/asm-ia64/hugetlb.h b/arch/ia64/include/asm/hugetlb.h
index da55c63728e0..da55c63728e0 100644
--- a/include/asm-ia64/hugetlb.h
+++ b/arch/ia64/include/asm/hugetlb.h
diff --git a/include/asm-ia64/hw_irq.h b/arch/ia64/include/asm/hw_irq.h
index 5c99cbcb8a0d..5c99cbcb8a0d 100644
--- a/include/asm-ia64/hw_irq.h
+++ b/arch/ia64/include/asm/hw_irq.h
diff --git a/include/asm-ia64/ia32.h b/arch/ia64/include/asm/ia32.h
index 2390ee145aa1..2390ee145aa1 100644
--- a/include/asm-ia64/ia32.h
+++ b/arch/ia64/include/asm/ia32.h
diff --git a/include/asm-ia64/ia64regs.h b/arch/ia64/include/asm/ia64regs.h
index 1757f1c11ad4..1757f1c11ad4 100644
--- a/include/asm-ia64/ia64regs.h
+++ b/arch/ia64/include/asm/ia64regs.h
diff --git a/include/asm-ia64/intel_intrin.h b/arch/ia64/include/asm/intel_intrin.h
index 53cec577558a..53cec577558a 100644
--- a/include/asm-ia64/intel_intrin.h
+++ b/arch/ia64/include/asm/intel_intrin.h
diff --git a/include/asm-ia64/intrinsics.h b/arch/ia64/include/asm/intrinsics.h
index 47d686dba1eb..47d686dba1eb 100644
--- a/include/asm-ia64/intrinsics.h
+++ b/arch/ia64/include/asm/intrinsics.h
diff --git a/arch/ia64/include/asm/io.h b/arch/ia64/include/asm/io.h
new file mode 100644
index 000000000000..7f257507cd86
--- /dev/null
+++ b/arch/ia64/include/asm/io.h
@@ -0,0 +1,461 @@
+#ifndef _ASM_IA64_IO_H
+#define _ASM_IA64_IO_H
+
+/*
+ * This file contains the definitions for the emulated IO instructions
+ * inb/inw/inl/outb/outw/outl and the "string versions" of the same
+ * (insb/insw/insl/outsb/outsw/outsl). You can also use "pausing"
+ * versions of the single-IO instructions (inb_p/inw_p/..).
+ *
+ * This file is not meant to be obfuscating: it's just complicated to
+ * (a) handle it all in a way that makes gcc able to optimize it as
+ * well as possible and (b) trying to avoid writing the same thing
+ * over and over again with slight variations and possibly making a
+ * mistake somewhere.
+ *
+ * Copyright (C) 1998-2003 Hewlett-Packard Co
+ *	David Mosberger-Tang <davidm@hpl.hp.com>
+ * Copyright (C) 1999 Asit Mallick <asit.k.mallick@intel.com>
+ * Copyright (C) 1999 Don Dugger <don.dugger@intel.com>
+ */
+
+#include <asm/unaligned.h>
+
+/* We don't use IO slowdowns on the ia64, but.. */
+#define __SLOW_DOWN_IO	do { } while (0)
+#define SLOW_DOWN_IO	do { } while (0)
+
+#define __IA64_UNCACHED_OFFSET	RGN_BASE(RGN_UNCACHED)
+
+/*
+ * The legacy I/O space defined by the ia64 architecture supports only 65536 ports, but
+ * large machines may have multiple other I/O spaces so we can't place any a priori limit
+ * on IO_SPACE_LIMIT.  These additional spaces are described in ACPI.
+ */
+#define IO_SPACE_LIMIT		0xffffffffffffffffUL
+
+#define MAX_IO_SPACES_BITS		8
+#define MAX_IO_SPACES			(1UL << MAX_IO_SPACES_BITS)
+#define IO_SPACE_BITS			24
+#define IO_SPACE_SIZE			(1UL << IO_SPACE_BITS)
+
+#define IO_SPACE_NR(port)		((port) >> IO_SPACE_BITS)
+#define IO_SPACE_BASE(space)		((space) << IO_SPACE_BITS)
+#define IO_SPACE_PORT(port)		((port) & (IO_SPACE_SIZE - 1))
+
+#define IO_SPACE_SPARSE_ENCODING(p)	((((p) >> 2) << 12) | ((p) & 0xfff))
+
+struct io_space {
+	unsigned long mmio_base;	/* base in MMIO space */
+	int sparse;
+};
+
+extern struct io_space io_space[];
+extern unsigned int num_io_spaces;
+
+# ifdef __KERNEL__
+
+/*
+ * All MMIO iomem cookies are in region 6; anything less is a PIO cookie:
+ *	0xCxxxxxxxxxxxxxxx	MMIO cookie (return from ioremap)
+ *	0x000000001SPPPPPP	PIO cookie (S=space number, P..P=port)
+ *
+ * ioread/writeX() uses the leading 1 in PIO cookies (PIO_OFFSET) to catch
+ * code that uses bare port numbers without the prerequisite pci_iomap().
+ */
+#define PIO_OFFSET		(1UL << (MAX_IO_SPACES_BITS + IO_SPACE_BITS))
+#define PIO_MASK		(PIO_OFFSET - 1)
+#define PIO_RESERVED		__IA64_UNCACHED_OFFSET
+#define HAVE_ARCH_PIO_SIZE
+
+#include <asm/intrinsics.h>
+#include <asm/machvec.h>
+#include <asm/page.h>
+#include <asm/system.h>
+#include <asm-generic/iomap.h>
+
+/*
+ * Change virtual addresses to physical addresses and vv.
+ */
+static inline unsigned long
+virt_to_phys (volatile void *address)
+{
+	return (unsigned long) address - PAGE_OFFSET;
+}
+
+static inline void*
+phys_to_virt (unsigned long address)
+{
+	return (void *) (address + PAGE_OFFSET);
+}
+
+#define ARCH_HAS_VALID_PHYS_ADDR_RANGE
+extern u64 kern_mem_attribute (unsigned long phys_addr, unsigned long size);
+extern int valid_phys_addr_range (unsigned long addr, size_t count); /* efi.c */
+extern int valid_mmap_phys_addr_range (unsigned long pfn, size_t count);
+
+/*
+ * The following two macros are deprecated and scheduled for removal.
+ * Please use the PCI-DMA interface defined in <asm/pci.h> instead.
+ */
+#define bus_to_virt	phys_to_virt
+#define virt_to_bus	virt_to_phys
+#define page_to_bus	page_to_phys
+
+# endif /* KERNEL */
+
+/*
+ * Memory fence w/accept.  This should never be used in code that is
+ * not IA-64 specific.
+ */
+#define __ia64_mf_a()	ia64_mfa()
+
+/**
+ * ___ia64_mmiowb - I/O write barrier
+ *
+ * Ensure ordering of I/O space writes.  This will make sure that writes
+ * following the barrier will arrive after all previous writes.  For most
+ * ia64 platforms, this is a simple 'mf.a' instruction.
+ *
+ * See Documentation/DocBook/deviceiobook.tmpl for more information.
+ */
+static inline void ___ia64_mmiowb(void)
+{
+	ia64_mfa();
+}
+
+static inline void*
+__ia64_mk_io_addr (unsigned long port)
+{
+	struct io_space *space;
+	unsigned long offset;
+
+	space = &io_space[IO_SPACE_NR(port)];
+	port = IO_SPACE_PORT(port);
+	if (space->sparse)
+		offset = IO_SPACE_SPARSE_ENCODING(port);
+	else
+		offset = port;
+
+	return (void *) (space->mmio_base | offset);
+}
+
+#define __ia64_inb	___ia64_inb
+#define __ia64_inw	___ia64_inw
+#define __ia64_inl	___ia64_inl
+#define __ia64_outb	___ia64_outb
+#define __ia64_outw	___ia64_outw
+#define __ia64_outl	___ia64_outl
+#define __ia64_readb	___ia64_readb
+#define __ia64_readw	___ia64_readw
+#define __ia64_readl	___ia64_readl
+#define __ia64_readq	___ia64_readq
+#define __ia64_readb_relaxed	___ia64_readb
+#define __ia64_readw_relaxed	___ia64_readw
+#define __ia64_readl_relaxed	___ia64_readl
+#define __ia64_readq_relaxed	___ia64_readq
+#define __ia64_writeb	___ia64_writeb
+#define __ia64_writew	___ia64_writew
+#define __ia64_writel	___ia64_writel
+#define __ia64_writeq	___ia64_writeq
+#define __ia64_mmiowb	___ia64_mmiowb
+
+/*
+ * For the in/out routines, we need to do "mf.a" _after_ doing the I/O access to ensure
+ * that the access has completed before executing other I/O accesses.  Since we're doing
+ * the accesses through an uncachable (UC) translation, the CPU will execute them in
+ * program order.  However, we still need to tell the compiler not to shuffle them around
+ * during optimization, which is why we use "volatile" pointers.
+ */
+
+static inline unsigned int
+___ia64_inb (unsigned long port)
+{
+	volatile unsigned char *addr = __ia64_mk_io_addr(port);
+	unsigned char ret;
+
+	ret = *addr;
+	__ia64_mf_a();
+	return ret;
+}
+
+static inline unsigned int
+___ia64_inw (unsigned long port)
+{
+	volatile unsigned short *addr = __ia64_mk_io_addr(port);
+	unsigned short ret;
+
+	ret = *addr;
+	__ia64_mf_a();
+	return ret;
+}
+
+static inline unsigned int
+___ia64_inl (unsigned long port)
+{
+	volatile unsigned int *addr = __ia64_mk_io_addr(port);
+	unsigned int ret;
+
+	ret = *addr;
+	__ia64_mf_a();
+	return ret;
+}
+
+static inline void
+___ia64_outb (unsigned char val, unsigned long port)
+{
+	volatile unsigned char *addr = __ia64_mk_io_addr(port);
+
+	*addr = val;
+	__ia64_mf_a();
+}
+
+static inline void
+___ia64_outw (unsigned short val, unsigned long port)
+{
+	volatile unsigned short *addr = __ia64_mk_io_addr(port);
+
+	*addr = val;
+	__ia64_mf_a();
+}
+
+static inline void
+___ia64_outl (unsigned int val, unsigned long port)
+{
+	volatile unsigned int *addr = __ia64_mk_io_addr(port);
+
+	*addr = val;
+	__ia64_mf_a();
+}
+
+static inline void
+__insb (unsigned long port, void *dst, unsigned long count)
+{
+	unsigned char *dp = dst;
+
+	while (count--)
+		*dp++ = platform_inb(port);
+}
+
+static inline void
+__insw (unsigned long port, void *dst, unsigned long count)
+{
+	unsigned short *dp = dst;
+
+	while (count--)
+		put_unaligned(platform_inw(port), dp++);
+}
+
+static inline void
+__insl (unsigned long port, void *dst, unsigned long count)
+{
+	unsigned int *dp = dst;
+
+	while (count--)
+		put_unaligned(platform_inl(port), dp++);
+}
+
+static inline void
+__outsb (unsigned long port, const void *src, unsigned long count)
+{
+	const unsigned char *sp = src;
+
+	while (count--)
+		platform_outb(*sp++, port);
+}
+
+static inline void
+__outsw (unsigned long port, const void *src, unsigned long count)
+{
+	const unsigned short *sp = src;
+
+	while (count--)
+		platform_outw(get_unaligned(sp++), port);
+}
+
+static inline void
+__outsl (unsigned long port, const void *src, unsigned long count)
+{
+	const unsigned int *sp = src;
+
+	while (count--)
+		platform_outl(get_unaligned(sp++), port);
+}
+
+/*
+ * Unfortunately, some platforms are broken and do not follow the IA-64 architecture
+ * specification regarding legacy I/O support.  Thus, we have to make these operations
+ * platform dependent...
+ */
+#define __inb		platform_inb
+#define __inw		platform_inw
+#define __inl		platform_inl
+#define __outb		platform_outb
+#define __outw		platform_outw
+#define __outl		platform_outl
+#define __mmiowb	platform_mmiowb
+
+#define inb(p)		__inb(p)
+#define inw(p)		__inw(p)
+#define inl(p)		__inl(p)
+#define insb(p,d,c)	__insb(p,d,c)
+#define insw(p,d,c)	__insw(p,d,c)
+#define insl(p,d,c)	__insl(p,d,c)
+#define outb(v,p)	__outb(v,p)
+#define outw(v,p)	__outw(v,p)
+#define outl(v,p)	__outl(v,p)
+#define outsb(p,s,c)	__outsb(p,s,c)
+#define outsw(p,s,c)	__outsw(p,s,c)
+#define outsl(p,s,c)	__outsl(p,s,c)
+#define mmiowb()	__mmiowb()
+
+/*
+ * The address passed to these functions are ioremap()ped already.
+ *
+ * We need these to be machine vectors since some platforms don't provide
+ * DMA coherence via PIO reads (PCI drivers and the spec imply that this is
+ * a good idea).  Writes are ok though for all existing ia64 platforms (and
+ * hopefully it'll stay that way).
+ */
+static inline unsigned char
+___ia64_readb (const volatile void __iomem *addr)
+{
+	return *(volatile unsigned char __force *)addr;
+}
+
+static inline unsigned short
+___ia64_readw (const volatile void __iomem *addr)
+{
+	return *(volatile unsigned short __force *)addr;
+}
+
+static inline unsigned int
+___ia64_readl (const volatile void __iomem *addr)
+{
+	return *(volatile unsigned int __force *) addr;
+}
+
+static inline unsigned long
+___ia64_readq (const volatile void __iomem *addr)
+{
+	return *(volatile unsigned long __force *) addr;
+}
+
+static inline void
+__writeb (unsigned char val, volatile void __iomem *addr)
+{
+	*(volatile unsigned char __force *) addr = val;
+}
+
+static inline void
+__writew (unsigned short val, volatile void __iomem *addr)
+{
+	*(volatile unsigned short __force *) addr = val;
+}
+
+static inline void
+__writel (unsigned int val, volatile void __iomem *addr)
+{
+	*(volatile unsigned int __force *) addr = val;
+}
+
+static inline void
+__writeq (unsigned long val, volatile void __iomem *addr)
+{
+	*(volatile unsigned long __force *) addr = val;
+}
+
+#define __readb		platform_readb
+#define __readw		platform_readw
+#define __readl		platform_readl
+#define __readq		platform_readq
+#define __readb_relaxed	platform_readb_relaxed
+#define __readw_relaxed	platform_readw_relaxed
+#define __readl_relaxed	platform_readl_relaxed
+#define __readq_relaxed	platform_readq_relaxed
+
+#define readb(a)	__readb((a))
+#define readw(a)	__readw((a))
+#define readl(a)	__readl((a))
+#define readq(a)	__readq((a))
+#define readb_relaxed(a)	__readb_relaxed((a))
+#define readw_relaxed(a)	__readw_relaxed((a))
+#define readl_relaxed(a)	__readl_relaxed((a))
+#define readq_relaxed(a)	__readq_relaxed((a))
+#define __raw_readb	readb
+#define __raw_readw	readw
+#define __raw_readl	readl
+#define __raw_readq	readq
+#define __raw_readb_relaxed	readb_relaxed
+#define __raw_readw_relaxed	readw_relaxed
+#define __raw_readl_relaxed	readl_relaxed
+#define __raw_readq_relaxed	readq_relaxed
+#define writeb(v,a)	__writeb((v), (a))
+#define writew(v,a)	__writew((v), (a))
+#define writel(v,a)	__writel((v), (a))
+#define writeq(v,a)	__writeq((v), (a))
+#define __raw_writeb	writeb
+#define __raw_writew	writew
+#define __raw_writel	writel
+#define __raw_writeq	writeq
+
+#ifndef inb_p
+# define inb_p		inb
+#endif
+#ifndef inw_p
+# define inw_p		inw
+#endif
+#ifndef inl_p
+# define inl_p		inl
+#endif
+
+#ifndef outb_p
+# define outb_p		outb
+#endif
+#ifndef outw_p
+# define outw_p		outw
+#endif
+#ifndef outl_p
+# define outl_p		outl
+#endif
+
+# ifdef __KERNEL__
+
+extern void __iomem * ioremap(unsigned long offset, unsigned long size);
+extern void __iomem * ioremap_nocache (unsigned long offset, unsigned long size);
+extern void iounmap (volatile void __iomem *addr);
+
+/*
+ * String version of IO memory access ops:
+ */
+extern void memcpy_fromio(void *dst, const volatile void __iomem *src, long n);
+extern void memcpy_toio(volatile void __iomem *dst, const void *src, long n);
+extern void memset_io(volatile void __iomem *s, int c, long n);
+
+# endif /* __KERNEL__ */
+
+/*
+ * Enabling BIO_VMERGE_BOUNDARY forces us to turn off I/O MMU bypassing.  It is said that
+ * BIO-level virtual merging can give up to 4% performance boost (not verified for ia64).
+ * On the other hand, we know that I/O MMU bypassing gives ~8% performance improvement on
+ * SPECweb-like workloads on zx1-based machines.  Thus, for now we favor I/O MMU bypassing
+ * over BIO-level virtual merging.
+ */
+extern unsigned long ia64_max_iommu_merge_mask;
+#if 1
+#define BIO_VMERGE_BOUNDARY	0
+#else
+/*
+ * It makes no sense at all to have this BIO_VMERGE_BOUNDARY macro here.  Should be
+ * replaced by dma_merge_mask() or something of that sort.  Note: the only way
+ * BIO_VMERGE_BOUNDARY is used is to mask off bits.  Effectively, our definition gets
+ * expanded into:
+ *
+ *	addr & ((ia64_max_iommu_merge_mask + 1) - 1) == (addr & ia64_max_iommu_vmerge_mask)
+ *
+ * which is precisely what we want.
+ */
+#define BIO_VMERGE_BOUNDARY	(ia64_max_iommu_merge_mask + 1)
+#endif
+
+#endif /* _ASM_IA64_IO_H */
diff --git a/include/asm-ia64/ioctl.h b/arch/ia64/include/asm/ioctl.h
index b279fe06dfe5..b279fe06dfe5 100644
--- a/include/asm-ia64/ioctl.h
+++ b/arch/ia64/include/asm/ioctl.h
diff --git a/include/asm-ia64/ioctls.h b/arch/ia64/include/asm/ioctls.h
index f41b636a0bf6..f41b636a0bf6 100644
--- a/include/asm-ia64/ioctls.h
+++ b/arch/ia64/include/asm/ioctls.h
diff --git a/include/asm-ia64/iosapic.h b/arch/ia64/include/asm/iosapic.h
index b9c102e15f22..b9c102e15f22 100644
--- a/include/asm-ia64/iosapic.h
+++ b/arch/ia64/include/asm/iosapic.h
diff --git a/include/asm-ia64/ipcbuf.h b/arch/ia64/include/asm/ipcbuf.h
index 079899ae7d32..079899ae7d32 100644
--- a/include/asm-ia64/ipcbuf.h
+++ b/arch/ia64/include/asm/ipcbuf.h
diff --git a/include/asm-ia64/irq.h b/arch/ia64/include/asm/irq.h
index 3627116fb0e2..3627116fb0e2 100644
--- a/include/asm-ia64/irq.h
+++ b/arch/ia64/include/asm/irq.h
diff --git a/include/asm-ia64/irq_regs.h b/arch/ia64/include/asm/irq_regs.h
index 3dd9c0b70270..3dd9c0b70270 100644
--- a/include/asm-ia64/irq_regs.h
+++ b/arch/ia64/include/asm/irq_regs.h
diff --git a/arch/ia64/include/asm/kdebug.h b/arch/ia64/include/asm/kdebug.h
new file mode 100644
index 000000000000..d11a69855036
--- /dev/null
+++ b/arch/ia64/include/asm/kdebug.h
@@ -0,0 +1,57 @@
+#ifndef _IA64_KDEBUG_H
+#define _IA64_KDEBUG_H 1
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ *
+ * Copyright (C) Intel Corporation, 2005
+ *
+ * 2005-Apr     Rusty Lynch <rusty.lynch@intel.com> and Anil S Keshavamurthy
+ *              <anil.s.keshavamurthy@intel.com> adopted from
+ *              include/asm-x86_64/kdebug.h
+ *
+ * 2005-Oct	Keith Owens <kaos@sgi.com>.  Expand notify_die to cover more
+ *		events.
+ */
+
+enum die_val {
+	DIE_BREAK = 1,
+	DIE_FAULT,
+	DIE_OOPS,
+	DIE_MACHINE_HALT,
+	DIE_MACHINE_RESTART,
+	DIE_MCA_MONARCH_ENTER,
+	DIE_MCA_MONARCH_PROCESS,
+	DIE_MCA_MONARCH_LEAVE,
+	DIE_MCA_SLAVE_ENTER,
+	DIE_MCA_SLAVE_PROCESS,
+	DIE_MCA_SLAVE_LEAVE,
+	DIE_MCA_RENDZVOUS_ENTER,
+	DIE_MCA_RENDZVOUS_PROCESS,
+	DIE_MCA_RENDZVOUS_LEAVE,
+	DIE_MCA_NEW_TIMEOUT,
+	DIE_INIT_ENTER,
+	DIE_INIT_MONARCH_ENTER,
+	DIE_INIT_MONARCH_PROCESS,
+	DIE_INIT_MONARCH_LEAVE,
+	DIE_INIT_SLAVE_ENTER,
+	DIE_INIT_SLAVE_PROCESS,
+	DIE_INIT_SLAVE_LEAVE,
+	DIE_KDEBUG_ENTER,
+	DIE_KDEBUG_LEAVE,
+	DIE_KDUMP_ENTER,
+	DIE_KDUMP_LEAVE,
+};
+
+#endif
diff --git a/arch/ia64/include/asm/kexec.h b/arch/ia64/include/asm/kexec.h
new file mode 100644
index 000000000000..e1d58f819d78
--- /dev/null
+++ b/arch/ia64/include/asm/kexec.h
@@ -0,0 +1,44 @@
+#ifndef _ASM_IA64_KEXEC_H
+#define _ASM_IA64_KEXEC_H
+
+
+/* Maximum physical address we can use pages from */
+#define KEXEC_SOURCE_MEMORY_LIMIT (-1UL)
+/* Maximum address we can reach in physical address mode */
+#define KEXEC_DESTINATION_MEMORY_LIMIT (-1UL)
+/* Maximum address we can use for the control code buffer */
+#define KEXEC_CONTROL_MEMORY_LIMIT TASK_SIZE
+
+#define KEXEC_CONTROL_PAGE_SIZE (8192 + 8192 + 4096)
+
+/* The native architecture */
+#define KEXEC_ARCH KEXEC_ARCH_IA_64
+
+#define kexec_flush_icache_page(page) do { \
+                unsigned long page_addr = (unsigned long)page_address(page); \
+                flush_icache_range(page_addr, page_addr + PAGE_SIZE); \
+        } while(0)
+
+extern struct kimage *ia64_kimage;
+extern const unsigned int relocate_new_kernel_size;
+extern void relocate_new_kernel(unsigned long, unsigned long,
+		struct ia64_boot_param *, unsigned long);
+static inline void
+crash_setup_regs(struct pt_regs *newregs, struct pt_regs *oldregs)
+{
+}
+extern struct resource efi_memmap_res;
+extern struct resource boot_param_res;
+extern void kdump_smp_send_stop(void);
+extern void kdump_smp_send_init(void);
+extern void kexec_disable_iosapic(void);
+extern void crash_save_this_cpu(void);
+struct rsvd_region;
+extern unsigned long kdump_find_rsvd_region(unsigned long size,
+		struct rsvd_region *rsvd_regions, int n);
+extern void kdump_cpu_freeze(struct unw_frame_info *info, void *arg);
+extern int kdump_status[];
+extern atomic_t kdump_cpu_freezed;
+extern atomic_t kdump_in_progress;
+
+#endif /* _ASM_IA64_KEXEC_H */
diff --git a/include/asm-ia64/kmap_types.h b/arch/ia64/include/asm/kmap_types.h
index 5d1658aa2b3b..5d1658aa2b3b 100644
--- a/include/asm-ia64/kmap_types.h
+++ b/arch/ia64/include/asm/kmap_types.h
diff --git a/arch/ia64/include/asm/kprobes.h b/arch/ia64/include/asm/kprobes.h
new file mode 100644
index 000000000000..dbf83fb28db3
--- /dev/null
+++ b/arch/ia64/include/asm/kprobes.h
@@ -0,0 +1,132 @@
+#ifndef _ASM_KPROBES_H
+#define _ASM_KPROBES_H
+/*
+ *  Kernel Probes (KProbes)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ *
+ * Copyright (C) IBM Corporation, 2002, 2004
+ * Copyright (C) Intel Corporation, 2005
+ *
+ * 2005-Apr     Rusty Lynch <rusty.lynch@intel.com> and Anil S Keshavamurthy
+ *              <anil.s.keshavamurthy@intel.com> adapted from i386
+ */
+#include <linux/types.h>
+#include <linux/ptrace.h>
+#include <linux/percpu.h>
+#include <asm/break.h>
+
+#define __ARCH_WANT_KPROBES_INSN_SLOT
+#define MAX_INSN_SIZE   2	/* last half is for kprobe-booster */
+#define BREAK_INST	(long)(__IA64_BREAK_KPROBE << 6)
+#define NOP_M_INST	(long)(1<<27)
+#define BRL_INST(i1, i2) ((long)((0xcL << 37) |	/* brl */ \
+				(0x1L << 12) |	/* many */ \
+				(((i1) & 1) << 36) | ((i2) << 13))) /* imm */
+
+typedef union cmp_inst {
+	struct {
+	unsigned long long qp : 6;
+	unsigned long long p1 : 6;
+	unsigned long long c  : 1;
+	unsigned long long r2 : 7;
+	unsigned long long r3 : 7;
+	unsigned long long p2 : 6;
+	unsigned long long ta : 1;
+	unsigned long long x2 : 2;
+	unsigned long long tb : 1;
+	unsigned long long opcode : 4;
+	unsigned long long reserved : 23;
+	}f;
+	unsigned long long l;
+} cmp_inst_t;
+
+struct kprobe;
+
+typedef struct _bundle {
+	struct {
+		unsigned long long template : 5;
+		unsigned long long slot0 : 41;
+		unsigned long long slot1_p0 : 64-46;
+	} quad0;
+	struct {
+		unsigned long long slot1_p1 : 41 - (64-46);
+		unsigned long long slot2 : 41;
+	} quad1;
+} __attribute__((__aligned__(16)))  bundle_t;
+
+struct prev_kprobe {
+	struct kprobe *kp;
+	unsigned long status;
+};
+
+#define	MAX_PARAM_RSE_SIZE	(0x60+0x60/0x3f)
+/* per-cpu kprobe control block */
+#define ARCH_PREV_KPROBE_SZ 2
+struct kprobe_ctlblk {
+	unsigned long kprobe_status;
+	struct pt_regs jprobe_saved_regs;
+	unsigned long jprobes_saved_stacked_regs[MAX_PARAM_RSE_SIZE];
+	unsigned long *bsp;
+	unsigned long cfm;
+	atomic_t prev_kprobe_index;
+	struct prev_kprobe prev_kprobe[ARCH_PREV_KPROBE_SZ];
+};
+
+#define kretprobe_blacklist_size 0
+
+#define SLOT0_OPCODE_SHIFT	(37)
+#define SLOT1_p1_OPCODE_SHIFT	(37 - (64-46))
+#define SLOT2_OPCODE_SHIFT 	(37)
+
+#define INDIRECT_CALL_OPCODE		(1)
+#define IP_RELATIVE_CALL_OPCODE		(5)
+#define IP_RELATIVE_BRANCH_OPCODE	(4)
+#define IP_RELATIVE_PREDICT_OPCODE	(7)
+#define LONG_BRANCH_OPCODE		(0xC)
+#define LONG_CALL_OPCODE		(0xD)
+#define flush_insn_slot(p)		do { } while (0)
+
+typedef struct kprobe_opcode {
+	bundle_t bundle;
+} kprobe_opcode_t;
+
+struct fnptr {
+	unsigned long ip;
+	unsigned long gp;
+};
+
+/* Architecture specific copy of original instruction*/
+struct arch_specific_insn {
+	/* copy of the instruction to be emulated */
+	kprobe_opcode_t *insn;
+ #define INST_FLAG_FIX_RELATIVE_IP_ADDR		1
+ #define INST_FLAG_FIX_BRANCH_REG		2
+ #define INST_FLAG_BREAK_INST			4
+ #define INST_FLAG_BOOSTABLE			8
+ 	unsigned long inst_flag;
+ 	unsigned short target_br_reg;
+	unsigned short slot;
+};
+
+extern int kprobe_fault_handler(struct pt_regs *regs, int trapnr);
+extern int kprobe_exceptions_notify(struct notifier_block *self,
+				    unsigned long val, void *data);
+
+extern void invalidate_stacked_regs(void);
+extern void flush_register_stack(void);
+extern void arch_remove_kprobe(struct kprobe *p);
+
+#endif				/* _ASM_KPROBES_H */
diff --git a/include/asm-ia64/kregs.h b/arch/ia64/include/asm/kregs.h
index aefcdfee7f23..aefcdfee7f23 100644
--- a/include/asm-ia64/kregs.h
+++ b/arch/ia64/include/asm/kregs.h
diff --git a/arch/ia64/include/asm/kvm.h b/arch/ia64/include/asm/kvm.h
new file mode 100644
index 000000000000..f38472ac2267
--- /dev/null
+++ b/arch/ia64/include/asm/kvm.h
@@ -0,0 +1,211 @@
+#ifndef __ASM_IA64_KVM_H
+#define __ASM_IA64_KVM_H
+
+/*
+ * kvm structure definitions  for ia64
+ *
+ * Copyright (C) 2007 Xiantao Zhang <xiantao.zhang@intel.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc., 59 Temple
+ * Place - Suite 330, Boston, MA 02111-1307 USA.
+ *
+ */
+
+#include <asm/types.h>
+
+#include <linux/ioctl.h>
+
+/* Architectural interrupt line count. */
+#define KVM_NR_INTERRUPTS 256
+
+#define KVM_IOAPIC_NUM_PINS  48
+
+struct kvm_ioapic_state {
+	__u64 base_address;
+	__u32 ioregsel;
+	__u32 id;
+	__u32 irr;
+	__u32 pad;
+	union {
+		__u64 bits;
+		struct {
+			__u8 vector;
+			__u8 delivery_mode:3;
+			__u8 dest_mode:1;
+			__u8 delivery_status:1;
+			__u8 polarity:1;
+			__u8 remote_irr:1;
+			__u8 trig_mode:1;
+			__u8 mask:1;
+			__u8 reserve:7;
+			__u8 reserved[4];
+			__u8 dest_id;
+		} fields;
+	} redirtbl[KVM_IOAPIC_NUM_PINS];
+};
+
+#define KVM_IRQCHIP_PIC_MASTER   0
+#define KVM_IRQCHIP_PIC_SLAVE    1
+#define KVM_IRQCHIP_IOAPIC       2
+
+#define KVM_CONTEXT_SIZE	8*1024
+
+struct kvm_fpreg {
+	union {
+		unsigned long bits[2];
+		long double __dummy;	/* force 16-byte alignment */
+	} u;
+};
+
+union context {
+	/* 8K size */
+	char	dummy[KVM_CONTEXT_SIZE];
+	struct {
+		unsigned long       psr;
+		unsigned long       pr;
+		unsigned long       caller_unat;
+		unsigned long       pad;
+		unsigned long       gr[32];
+		unsigned long       ar[128];
+		unsigned long       br[8];
+		unsigned long       cr[128];
+		unsigned long       rr[8];
+		unsigned long       ibr[8];
+		unsigned long       dbr[8];
+		unsigned long       pkr[8];
+		struct kvm_fpreg   fr[128];
+	};
+};
+
+struct thash_data {
+	union {
+		struct {
+			unsigned long p    :  1; /* 0 */
+			unsigned long rv1  :  1; /* 1 */
+			unsigned long ma   :  3; /* 2-4 */
+			unsigned long a    :  1; /* 5 */
+			unsigned long d    :  1; /* 6 */
+			unsigned long pl   :  2; /* 7-8 */
+			unsigned long ar   :  3; /* 9-11 */
+			unsigned long ppn  : 38; /* 12-49 */
+			unsigned long rv2  :  2; /* 50-51 */
+			unsigned long ed   :  1; /* 52 */
+			unsigned long ig1  : 11; /* 53-63 */
+		};
+		struct {
+			unsigned long __rv1 : 53;     /* 0-52 */
+			unsigned long contiguous : 1; /*53 */
+			unsigned long tc : 1;         /* 54 TR or TC */
+			unsigned long cl : 1;
+			/* 55 I side or D side cache line */
+			unsigned long len  :  4;      /* 56-59 */
+			unsigned long io  : 1;	/* 60 entry is for io or not */
+			unsigned long nomap : 1;
+			/* 61 entry cann't be inserted into machine TLB.*/
+			unsigned long checked : 1;
+			/* 62 for VTLB/VHPT sanity check */
+			unsigned long invalid : 1;
+			/* 63 invalid entry */
+		};
+		unsigned long page_flags;
+	};                  /* same for VHPT and TLB */
+
+	union {
+		struct {
+			unsigned long rv3  :  2;
+			unsigned long ps   :  6;
+			unsigned long key  : 24;
+			unsigned long rv4  : 32;
+		};
+		unsigned long itir;
+	};
+	union {
+		struct {
+			unsigned long ig2  :  12;
+			unsigned long vpn  :  49;
+			unsigned long vrn  :   3;
+		};
+		unsigned long ifa;
+		unsigned long vadr;
+		struct {
+			unsigned long tag  :  63;
+			unsigned long ti   :  1;
+		};
+		unsigned long etag;
+	};
+	union {
+		struct thash_data *next;
+		unsigned long rid;
+		unsigned long gpaddr;
+	};
+};
+
+#define	NITRS	8
+#define NDTRS	8
+
+struct saved_vpd {
+	unsigned long  vhpi;
+	unsigned long  vgr[16];
+	unsigned long  vbgr[16];
+	unsigned long  vnat;
+	unsigned long  vbnat;
+	unsigned long  vcpuid[5];
+	unsigned long  vpsr;
+	unsigned long  vpr;
+	unsigned long  vcr[128];
+};
+
+struct kvm_regs {
+	char *saved_guest;
+	char *saved_stack;
+	struct saved_vpd vpd;
+	/*Arch-regs*/
+	int mp_state;
+	unsigned long vmm_rr;
+	/* TR and TC.  */
+	struct thash_data itrs[NITRS];
+	struct thash_data dtrs[NDTRS];
+	/* Bit is set if there is a tr/tc for the region.  */
+	unsigned char itr_regions;
+	unsigned char dtr_regions;
+	unsigned char tc_regions;
+
+	char irq_check;
+	unsigned long saved_itc;
+	unsigned long itc_check;
+	unsigned long timer_check;
+	unsigned long timer_pending;
+	unsigned long last_itc;
+
+	unsigned long vrr[8];
+	unsigned long ibr[8];
+	unsigned long dbr[8];
+	unsigned long insvc[4];		/* Interrupt in service.  */
+	unsigned long xtp;
+
+	unsigned long metaphysical_rr0; /* from kvm_arch (so is pinned) */
+	unsigned long metaphysical_rr4;	/* from kvm_arch (so is pinned) */
+	unsigned long metaphysical_saved_rr0; /* from kvm_arch          */
+	unsigned long metaphysical_saved_rr4; /* from kvm_arch          */
+	unsigned long fp_psr;       /*used for lazy float register */
+	unsigned long saved_gp;
+	/*for phycial  emulation */
+};
+
+struct kvm_sregs {
+};
+
+struct kvm_fpu {
+};
+
+#endif
diff --git a/include/asm-ia64/kvm_host.h b/arch/ia64/include/asm/kvm_host.h
index 1efe513a9941..1efe513a9941 100644
--- a/include/asm-ia64/kvm_host.h
+++ b/arch/ia64/include/asm/kvm_host.h
diff --git a/include/asm-ia64/kvm_para.h b/arch/ia64/include/asm/kvm_para.h
index 9f9796bb3441..0d6d8ca07b8c 100644
--- a/include/asm-ia64/kvm_para.h
+++ b/arch/ia64/include/asm/kvm_para.h
@@ -2,8 +2,6 @@
 #define __IA64_KVM_PARA_H
 
 /*
- * asm-ia64/kvm_para.h
- *
  * Copyright (C) 2007 Xiantao Zhang <xiantao.zhang@intel.com>
  *
  * This program is free software; you can redistribute it and/or modify it
diff --git a/include/asm-ia64/libata-portmap.h b/arch/ia64/include/asm/libata-portmap.h
index 0e00c9a9f410..0e00c9a9f410 100644
--- a/include/asm-ia64/libata-portmap.h
+++ b/arch/ia64/include/asm/libata-portmap.h
diff --git a/include/asm-ia64/linkage.h b/arch/ia64/include/asm/linkage.h
index ef22a45c1890..ef22a45c1890 100644
--- a/include/asm-ia64/linkage.h
+++ b/arch/ia64/include/asm/linkage.h
diff --git a/include/asm-ia64/local.h b/arch/ia64/include/asm/local.h
index c11c530f74d0..c11c530f74d0 100644
--- a/include/asm-ia64/local.h
+++ b/arch/ia64/include/asm/local.h
diff --git a/include/asm-ia64/machvec.h b/arch/ia64/include/asm/machvec.h
index 0721a5e8271e..2b850ccafef5 100644
--- a/include/asm-ia64/machvec.h
+++ b/arch/ia64/include/asm/machvec.h
@@ -54,7 +54,7 @@ typedef void ia64_mv_dma_sync_single_for_cpu (struct device *, dma_addr_t, size_
 typedef void ia64_mv_dma_sync_sg_for_cpu (struct device *, struct scatterlist *, int, int);
 typedef void ia64_mv_dma_sync_single_for_device (struct device *, dma_addr_t, size_t, int);
 typedef void ia64_mv_dma_sync_sg_for_device (struct device *, struct scatterlist *, int, int);
-typedef int ia64_mv_dma_mapping_error (dma_addr_t dma_addr);
+typedef int ia64_mv_dma_mapping_error(struct device *, dma_addr_t dma_addr);
 typedef int ia64_mv_dma_supported (struct device *, u64);
 
 typedef dma_addr_t ia64_mv_dma_map_single_attrs (struct device *, void *, size_t, int, struct dma_attrs *);
@@ -290,7 +290,7 @@ extern void machvec_init (const char *name);
 extern void machvec_init_from_cmdline(const char *cmdline);
 
 # else
-#  error Unknown configuration.  Update asm-ia64/machvec.h.
+#  error Unknown configuration.  Update arch/ia64/include/asm/machvec.h.
 # endif /* CONFIG_IA64_GENERIC */
 
 /*
diff --git a/include/asm-ia64/machvec_dig.h b/arch/ia64/include/asm/machvec_dig.h
index 8a0752f40987..8a0752f40987 100644
--- a/include/asm-ia64/machvec_dig.h
+++ b/arch/ia64/include/asm/machvec_dig.h
diff --git a/include/asm-ia64/machvec_hpsim.h b/arch/ia64/include/asm/machvec_hpsim.h
index cf72fc87fdfe..cf72fc87fdfe 100644
--- a/include/asm-ia64/machvec_hpsim.h
+++ b/arch/ia64/include/asm/machvec_hpsim.h
diff --git a/include/asm-ia64/machvec_hpzx1.h b/arch/ia64/include/asm/machvec_hpzx1.h
index 2f57f5144b9f..2f57f5144b9f 100644
--- a/include/asm-ia64/machvec_hpzx1.h
+++ b/arch/ia64/include/asm/machvec_hpzx1.h
diff --git a/include/asm-ia64/machvec_hpzx1_swiotlb.h b/arch/ia64/include/asm/machvec_hpzx1_swiotlb.h
index a842cdda827b..a842cdda827b 100644
--- a/include/asm-ia64/machvec_hpzx1_swiotlb.h
+++ b/arch/ia64/include/asm/machvec_hpzx1_swiotlb.h
diff --git a/include/asm-ia64/machvec_init.h b/arch/ia64/include/asm/machvec_init.h
index 7f21249fba3f..7f21249fba3f 100644
--- a/include/asm-ia64/machvec_init.h
+++ b/arch/ia64/include/asm/machvec_init.h
diff --git a/include/asm-ia64/machvec_sn2.h b/arch/ia64/include/asm/machvec_sn2.h
index 781308ea7b88..781308ea7b88 100644
--- a/include/asm-ia64/machvec_sn2.h
+++ b/arch/ia64/include/asm/machvec_sn2.h
diff --git a/include/asm-ia64/machvec_uv.h b/arch/ia64/include/asm/machvec_uv.h
index 2931447f3813..2931447f3813 100644
--- a/include/asm-ia64/machvec_uv.h
+++ b/arch/ia64/include/asm/machvec_uv.h
diff --git a/include/asm-ia64/mc146818rtc.h b/arch/ia64/include/asm/mc146818rtc.h
index 407787a237ba..407787a237ba 100644
--- a/include/asm-ia64/mc146818rtc.h
+++ b/arch/ia64/include/asm/mc146818rtc.h
diff --git a/include/asm-ia64/mca.h b/arch/ia64/include/asm/mca.h
index 18a4321349a3..18a4321349a3 100644
--- a/include/asm-ia64/mca.h
+++ b/arch/ia64/include/asm/mca.h
diff --git a/include/asm-ia64/mca_asm.h b/arch/ia64/include/asm/mca_asm.h
index dd2a5b134390..dd2a5b134390 100644
--- a/include/asm-ia64/mca_asm.h
+++ b/arch/ia64/include/asm/mca_asm.h
diff --git a/include/asm-ia64/meminit.h b/arch/ia64/include/asm/meminit.h
index 7245a5781594..7245a5781594 100644
--- a/include/asm-ia64/meminit.h
+++ b/arch/ia64/include/asm/meminit.h
diff --git a/include/asm-ia64/mman.h b/arch/ia64/include/asm/mman.h
index c73b87832a1e..c73b87832a1e 100644
--- a/include/asm-ia64/mman.h
+++ b/arch/ia64/include/asm/mman.h
diff --git a/include/asm-ia64/mmu.h b/arch/ia64/include/asm/mmu.h
index 611432ba579c..611432ba579c 100644
--- a/include/asm-ia64/mmu.h
+++ b/arch/ia64/include/asm/mmu.h
diff --git a/include/asm-ia64/mmu_context.h b/arch/ia64/include/asm/mmu_context.h
index 040bc87db930..040bc87db930 100644
--- a/include/asm-ia64/mmu_context.h
+++ b/arch/ia64/include/asm/mmu_context.h
diff --git a/include/asm-ia64/mmzone.h b/arch/ia64/include/asm/mmzone.h
index 34efe88eb849..34efe88eb849 100644
--- a/include/asm-ia64/mmzone.h
+++ b/arch/ia64/include/asm/mmzone.h
diff --git a/include/asm-ia64/module.h b/arch/ia64/include/asm/module.h
index d2da61e4c49b..d2da61e4c49b 100644
--- a/include/asm-ia64/module.h
+++ b/arch/ia64/include/asm/module.h
diff --git a/include/asm-ia64/msgbuf.h b/arch/ia64/include/asm/msgbuf.h
index 6c64c0d2aae1..6c64c0d2aae1 100644
--- a/include/asm-ia64/msgbuf.h
+++ b/arch/ia64/include/asm/msgbuf.h
diff --git a/include/asm-ia64/mutex.h b/arch/ia64/include/asm/mutex.h
index bed73a643a56..bed73a643a56 100644
--- a/include/asm-ia64/mutex.h
+++ b/arch/ia64/include/asm/mutex.h
diff --git a/include/asm-ia64/native/inst.h b/arch/ia64/include/asm/native/inst.h
index c953a2ca4fce..c8efbf7b849e 100644
--- a/include/asm-ia64/native/inst.h
+++ b/arch/ia64/include/asm/native/inst.h
@@ -1,5 +1,5 @@
 /******************************************************************************
- * include/asm-ia64/native/inst.h
+ * arch/ia64/include/asm/native/inst.h
  *
  * Copyright (c) 2008 Isaku Yamahata <yamahata at valinux co jp>
  *                    VA Linux Systems Japan K.K.
diff --git a/arch/ia64/include/asm/native/irq.h b/arch/ia64/include/asm/native/irq.h
new file mode 100644
index 000000000000..887a228e2edb
--- /dev/null
+++ b/arch/ia64/include/asm/native/irq.h
@@ -0,0 +1,33 @@
+/******************************************************************************
+ * arch/ia64/include/asm/native/irq.h
+ *
+ * Copyright (c) 2008 Isaku Yamahata <yamahata at valinux co jp>
+ *                    VA Linux Systems Japan K.K.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#ifndef _ASM_IA64_NATIVE_IRQ_H
+#define _ASM_IA64_NATIVE_IRQ_H
+
+#define NR_VECTORS	256
+
+#if (NR_VECTORS + 32 * NR_CPUS) < 1024
+#define IA64_NATIVE_NR_IRQS (NR_VECTORS + 32 * NR_CPUS)
+#else
+#define IA64_NATIVE_NR_IRQS 1024
+#endif
+
+#endif /* _ASM_IA64_NATIVE_IRQ_H */
diff --git a/include/asm-ia64/nodedata.h b/arch/ia64/include/asm/nodedata.h
index 2fb337b0e9b7..2fb337b0e9b7 100644
--- a/include/asm-ia64/nodedata.h
+++ b/arch/ia64/include/asm/nodedata.h
diff --git a/include/asm-ia64/numa.h b/arch/ia64/include/asm/numa.h
index 3499ff57bf42..3499ff57bf42 100644
--- a/include/asm-ia64/numa.h
+++ b/arch/ia64/include/asm/numa.h
diff --git a/include/asm-ia64/page.h b/arch/ia64/include/asm/page.h
index 5f271bc712ee..5f271bc712ee 100644
--- a/include/asm-ia64/page.h
+++ b/arch/ia64/include/asm/page.h
diff --git a/include/asm-ia64/pal.h b/arch/ia64/include/asm/pal.h
index 67b02901ead4..67b02901ead4 100644
--- a/include/asm-ia64/pal.h
+++ b/arch/ia64/include/asm/pal.h
diff --git a/include/asm-ia64/param.h b/arch/ia64/include/asm/param.h
index 0964c32c1358..0964c32c1358 100644
--- a/include/asm-ia64/param.h
+++ b/arch/ia64/include/asm/param.h
diff --git a/include/asm-ia64/paravirt.h b/arch/ia64/include/asm/paravirt.h
index 1b4df129f579..660cab044834 100644
--- a/include/asm-ia64/paravirt.h
+++ b/arch/ia64/include/asm/paravirt.h
@@ -1,6 +1,4 @@
 /******************************************************************************
- * include/asm-ia64/paravirt.h
- *
  * Copyright (c) 2008 Isaku Yamahata <yamahata at valinux co jp>
  *                    VA Linux Systems Japan K.K.
  *
diff --git a/include/asm-ia64/paravirt_privop.h b/arch/ia64/include/asm/paravirt_privop.h
index 52482e6940ac..d577aac11835 100644
--- a/include/asm-ia64/paravirt_privop.h
+++ b/arch/ia64/include/asm/paravirt_privop.h
@@ -1,6 +1,4 @@
 /******************************************************************************
- * include/asm-ia64/paravirt_privops.h
- *
  * Copyright (c) 2008 Isaku Yamahata <yamahata at valinux co jp>
  *                    VA Linux Systems Japan K.K.
  *
diff --git a/include/asm-ia64/parport.h b/arch/ia64/include/asm/parport.h
index 67e16adfcd25..67e16adfcd25 100644
--- a/include/asm-ia64/parport.h
+++ b/arch/ia64/include/asm/parport.h
diff --git a/include/asm-ia64/patch.h b/arch/ia64/include/asm/patch.h
index 295fe6ab4584..295fe6ab4584 100644
--- a/include/asm-ia64/patch.h
+++ b/arch/ia64/include/asm/patch.h
diff --git a/include/asm-ia64/pci.h b/arch/ia64/include/asm/pci.h
index 0149097b736d..0149097b736d 100644
--- a/include/asm-ia64/pci.h
+++ b/arch/ia64/include/asm/pci.h
diff --git a/include/asm-ia64/percpu.h b/arch/ia64/include/asm/percpu.h
index 77f30b664b4e..77f30b664b4e 100644
--- a/include/asm-ia64/percpu.h
+++ b/arch/ia64/include/asm/percpu.h
diff --git a/include/asm-ia64/perfmon.h b/arch/ia64/include/asm/perfmon.h
index 7f3333dd00e4..7f3333dd00e4 100644
--- a/include/asm-ia64/perfmon.h
+++ b/arch/ia64/include/asm/perfmon.h
diff --git a/include/asm-ia64/perfmon_default_smpl.h b/arch/ia64/include/asm/perfmon_default_smpl.h
index 48822c0811d8..48822c0811d8 100644
--- a/include/asm-ia64/perfmon_default_smpl.h
+++ b/arch/ia64/include/asm/perfmon_default_smpl.h
diff --git a/include/asm-ia64/pgalloc.h b/arch/ia64/include/asm/pgalloc.h
index b9ac1a6fc216..b9ac1a6fc216 100644
--- a/include/asm-ia64/pgalloc.h
+++ b/arch/ia64/include/asm/pgalloc.h
diff --git a/include/asm-ia64/pgtable.h b/arch/ia64/include/asm/pgtable.h
index 7a9bff47564f..7a9bff47564f 100644
--- a/include/asm-ia64/pgtable.h
+++ b/arch/ia64/include/asm/pgtable.h
diff --git a/include/asm-ia64/poll.h b/arch/ia64/include/asm/poll.h
index c98509d3149e..c98509d3149e 100644
--- a/include/asm-ia64/poll.h
+++ b/arch/ia64/include/asm/poll.h
diff --git a/include/asm-ia64/posix_types.h b/arch/ia64/include/asm/posix_types.h
index 17885567b731..17885567b731 100644
--- a/include/asm-ia64/posix_types.h
+++ b/arch/ia64/include/asm/posix_types.h
diff --git a/include/asm-ia64/processor.h b/arch/ia64/include/asm/processor.h
index f88fa054d01d..f88fa054d01d 100644
--- a/include/asm-ia64/processor.h
+++ b/arch/ia64/include/asm/processor.h
diff --git a/include/asm-ia64/ptrace.h b/arch/ia64/include/asm/ptrace.h
index 15f8dcfe6eee..15f8dcfe6eee 100644
--- a/include/asm-ia64/ptrace.h
+++ b/arch/ia64/include/asm/ptrace.h
diff --git a/include/asm-ia64/ptrace_offsets.h b/arch/ia64/include/asm/ptrace_offsets.h
index b712773c759e..b712773c759e 100644
--- a/include/asm-ia64/ptrace_offsets.h
+++ b/arch/ia64/include/asm/ptrace_offsets.h
diff --git a/include/asm-ia64/resource.h b/arch/ia64/include/asm/resource.h
index ba2272a87fc7..ba2272a87fc7 100644
--- a/include/asm-ia64/resource.h
+++ b/arch/ia64/include/asm/resource.h
diff --git a/include/asm-ia64/rse.h b/arch/ia64/include/asm/rse.h
index 02830a3b0196..02830a3b0196 100644
--- a/include/asm-ia64/rse.h
+++ b/arch/ia64/include/asm/rse.h
diff --git a/arch/ia64/include/asm/rwsem.h b/arch/ia64/include/asm/rwsem.h
new file mode 100644
index 000000000000..fbee74b15782
--- /dev/null
+++ b/arch/ia64/include/asm/rwsem.h
@@ -0,0 +1,182 @@
+/*
+ * R/W semaphores for ia64
+ *
+ * Copyright (C) 2003 Ken Chen <kenneth.w.chen@intel.com>
+ * Copyright (C) 2003 Asit Mallick <asit.k.mallick@intel.com>
+ * Copyright (C) 2005 Christoph Lameter <clameter@sgi.com>
+ *
+ * Based on asm-i386/rwsem.h and other architecture implementation.
+ *
+ * The MSW of the count is the negated number of active writers and
+ * waiting lockers, and the LSW is the total number of active locks.
+ *
+ * The lock count is initialized to 0 (no active and no waiting lockers).
+ *
+ * When a writer subtracts WRITE_BIAS, it'll get 0xffffffff00000001 for
+ * the case of an uncontended lock. Readers increment by 1 and see a positive
+ * value when uncontended, negative if there are writers (and maybe) readers
+ * waiting (in which case it goes to sleep).
+ */
+
+#ifndef _ASM_IA64_RWSEM_H
+#define _ASM_IA64_RWSEM_H
+
+#ifndef _LINUX_RWSEM_H
+#error "Please don't include <asm/rwsem.h> directly, use <linux/rwsem.h> instead."
+#endif
+
+#include <linux/list.h>
+#include <linux/spinlock.h>
+
+#include <asm/intrinsics.h>
+
+/*
+ * the semaphore definition
+ */
+struct rw_semaphore {
+	signed long		count;
+	spinlock_t		wait_lock;
+	struct list_head	wait_list;
+};
+
+#define RWSEM_UNLOCKED_VALUE		__IA64_UL_CONST(0x0000000000000000)
+#define RWSEM_ACTIVE_BIAS		__IA64_UL_CONST(0x0000000000000001)
+#define RWSEM_ACTIVE_MASK		__IA64_UL_CONST(0x00000000ffffffff)
+#define RWSEM_WAITING_BIAS		-__IA64_UL_CONST(0x0000000100000000)
+#define RWSEM_ACTIVE_READ_BIAS		RWSEM_ACTIVE_BIAS
+#define RWSEM_ACTIVE_WRITE_BIAS		(RWSEM_WAITING_BIAS + RWSEM_ACTIVE_BIAS)
+
+#define __RWSEM_INITIALIZER(name) \
+	{ RWSEM_UNLOCKED_VALUE, SPIN_LOCK_UNLOCKED, \
+	  LIST_HEAD_INIT((name).wait_list) }
+
+#define DECLARE_RWSEM(name) \
+	struct rw_semaphore name = __RWSEM_INITIALIZER(name)
+
+extern struct rw_semaphore *rwsem_down_read_failed(struct rw_semaphore *sem);
+extern struct rw_semaphore *rwsem_down_write_failed(struct rw_semaphore *sem);
+extern struct rw_semaphore *rwsem_wake(struct rw_semaphore *sem);
+extern struct rw_semaphore *rwsem_downgrade_wake(struct rw_semaphore *sem);
+
+static inline void
+init_rwsem (struct rw_semaphore *sem)
+{
+	sem->count = RWSEM_UNLOCKED_VALUE;
+	spin_lock_init(&sem->wait_lock);
+	INIT_LIST_HEAD(&sem->wait_list);
+}
+
+/*
+ * lock for reading
+ */
+static inline void
+__down_read (struct rw_semaphore *sem)
+{
+	long result = ia64_fetchadd8_acq((unsigned long *)&sem->count, 1);
+
+	if (result < 0)
+		rwsem_down_read_failed(sem);
+}
+
+/*
+ * lock for writing
+ */
+static inline void
+__down_write (struct rw_semaphore *sem)
+{
+	long old, new;
+
+	do {
+		old = sem->count;
+		new = old + RWSEM_ACTIVE_WRITE_BIAS;
+	} while (cmpxchg_acq(&sem->count, old, new) != old);
+
+	if (old != 0)
+		rwsem_down_write_failed(sem);
+}
+
+/*
+ * unlock after reading
+ */
+static inline void
+__up_read (struct rw_semaphore *sem)
+{
+	long result = ia64_fetchadd8_rel((unsigned long *)&sem->count, -1);
+
+	if (result < 0 && (--result & RWSEM_ACTIVE_MASK) == 0)
+		rwsem_wake(sem);
+}
+
+/*
+ * unlock after writing
+ */
+static inline void
+__up_write (struct rw_semaphore *sem)
+{
+	long old, new;
+
+	do {
+		old = sem->count;
+		new = old - RWSEM_ACTIVE_WRITE_BIAS;
+	} while (cmpxchg_rel(&sem->count, old, new) != old);
+
+	if (new < 0 && (new & RWSEM_ACTIVE_MASK) == 0)
+		rwsem_wake(sem);
+}
+
+/*
+ * trylock for reading -- returns 1 if successful, 0 if contention
+ */
+static inline int
+__down_read_trylock (struct rw_semaphore *sem)
+{
+	long tmp;
+	while ((tmp = sem->count) >= 0) {
+		if (tmp == cmpxchg_acq(&sem->count, tmp, tmp+1)) {
+			return 1;
+		}
+	}
+	return 0;
+}
+
+/*
+ * trylock for writing -- returns 1 if successful, 0 if contention
+ */
+static inline int
+__down_write_trylock (struct rw_semaphore *sem)
+{
+	long tmp = cmpxchg_acq(&sem->count, RWSEM_UNLOCKED_VALUE,
+			      RWSEM_ACTIVE_WRITE_BIAS);
+	return tmp == RWSEM_UNLOCKED_VALUE;
+}
+
+/*
+ * downgrade write lock to read lock
+ */
+static inline void
+__downgrade_write (struct rw_semaphore *sem)
+{
+	long old, new;
+
+	do {
+		old = sem->count;
+		new = old - RWSEM_WAITING_BIAS;
+	} while (cmpxchg_rel(&sem->count, old, new) != old);
+
+	if (old < 0)
+		rwsem_downgrade_wake(sem);
+}
+
+/*
+ * Implement atomic add functionality.  These used to be "inline" functions, but GCC v3.1
+ * doesn't quite optimize this stuff right and ends up with bad calls to fetchandadd.
+ */
+#define rwsem_atomic_add(delta, sem)	atomic64_add(delta, (atomic64_t *)(&(sem)->count))
+#define rwsem_atomic_update(delta, sem)	atomic64_add_return(delta, (atomic64_t *)(&(sem)->count))
+
+static inline int rwsem_is_locked(struct rw_semaphore *sem)
+{
+	return (sem->count != 0);
+}
+
+#endif /* _ASM_IA64_RWSEM_H */
diff --git a/include/asm-ia64/sal.h b/arch/ia64/include/asm/sal.h
index 89594b442f83..ea310c0812aa 100644
--- a/include/asm-ia64/sal.h
+++ b/arch/ia64/include/asm/sal.h
@@ -236,7 +236,7 @@ extern struct ia64_sal_desc_ptc *ia64_ptc_domain_info;
 
 extern unsigned short sal_revision;	/* supported SAL spec revision */
 extern unsigned short sal_version;	/* SAL version; OEM dependent */
-#define SAL_VERSION_CODE(major, minor) ((BIN2BCD(major) << 8) | BIN2BCD(minor))
+#define SAL_VERSION_CODE(major, minor) ((bin2bcd(major) << 8) | bin2bcd(minor))
 
 extern const char *ia64_sal_strerror (long status);
 extern void ia64_sal_init (struct ia64_sal_systab *sal_systab);
diff --git a/include/asm-ia64/scatterlist.h b/arch/ia64/include/asm/scatterlist.h
index d6f57874041d..d6f57874041d 100644
--- a/include/asm-ia64/scatterlist.h
+++ b/arch/ia64/include/asm/scatterlist.h
diff --git a/include/asm-ia64/sections.h b/arch/ia64/include/asm/sections.h
index 7286e4a9fe84..7286e4a9fe84 100644
--- a/include/asm-ia64/sections.h
+++ b/arch/ia64/include/asm/sections.h
diff --git a/include/asm-ia64/segment.h b/arch/ia64/include/asm/segment.h
index b89e2b3d648f..b89e2b3d648f 100644
--- a/include/asm-ia64/segment.h
+++ b/arch/ia64/include/asm/segment.h
diff --git a/include/asm-ia64/sembuf.h b/arch/ia64/include/asm/sembuf.h
index 1340fbc04d3e..1340fbc04d3e 100644
--- a/include/asm-ia64/sembuf.h
+++ b/arch/ia64/include/asm/sembuf.h
diff --git a/arch/ia64/include/asm/serial.h b/arch/ia64/include/asm/serial.h
new file mode 100644
index 000000000000..068be11583df
--- /dev/null
+++ b/arch/ia64/include/asm/serial.h
@@ -0,0 +1,17 @@
+/*
+ * Derived from the i386 version.
+ */
+
+/*
+ * This assumes you have a 1.8432 MHz clock for your UART.
+ *
+ * It'd be nice if someone built a serial card with a 24.576 MHz
+ * clock, since the 16550A is capable of handling a top speed of 1.5
+ * megabits/second; but this requires the faster clock.
+ */
+#define BASE_BAUD ( 1843200 / 16 )
+
+/*
+ * All legacy serial ports should be enumerated via ACPI namespace, so
+ * we need not list them here.
+ */
diff --git a/include/asm-ia64/setup.h b/arch/ia64/include/asm/setup.h
index 4399a44355b3..4399a44355b3 100644
--- a/include/asm-ia64/setup.h
+++ b/arch/ia64/include/asm/setup.h
diff --git a/include/asm-ia64/shmbuf.h b/arch/ia64/include/asm/shmbuf.h
index 585002a77acd..585002a77acd 100644
--- a/include/asm-ia64/shmbuf.h
+++ b/arch/ia64/include/asm/shmbuf.h
diff --git a/include/asm-ia64/shmparam.h b/arch/ia64/include/asm/shmparam.h
index d07508dc54ae..d07508dc54ae 100644
--- a/include/asm-ia64/shmparam.h
+++ b/arch/ia64/include/asm/shmparam.h
diff --git a/include/asm-ia64/sigcontext.h b/arch/ia64/include/asm/sigcontext.h
index 57ff777bcc40..57ff777bcc40 100644
--- a/include/asm-ia64/sigcontext.h
+++ b/arch/ia64/include/asm/sigcontext.h
diff --git a/include/asm-ia64/siginfo.h b/arch/ia64/include/asm/siginfo.h
index 9294e4b0c8bc..9294e4b0c8bc 100644
--- a/include/asm-ia64/siginfo.h
+++ b/arch/ia64/include/asm/siginfo.h
diff --git a/include/asm-ia64/signal.h b/arch/ia64/include/asm/signal.h
index 4f5ca5643cb1..4f5ca5643cb1 100644
--- a/include/asm-ia64/signal.h
+++ b/arch/ia64/include/asm/signal.h
diff --git a/include/asm-ia64/smp.h b/arch/ia64/include/asm/smp.h
index 12d96e0cd513..12d96e0cd513 100644
--- a/include/asm-ia64/smp.h
+++ b/arch/ia64/include/asm/smp.h
diff --git a/include/asm-ia64/sn/acpi.h b/arch/ia64/include/asm/sn/acpi.h
index 9ce2801cbd57..9ce2801cbd57 100644
--- a/include/asm-ia64/sn/acpi.h
+++ b/arch/ia64/include/asm/sn/acpi.h
diff --git a/include/asm-ia64/sn/addrs.h b/arch/ia64/include/asm/sn/addrs.h
index e715c794b186..e715c794b186 100644
--- a/include/asm-ia64/sn/addrs.h
+++ b/arch/ia64/include/asm/sn/addrs.h
diff --git a/include/asm-ia64/sn/arch.h b/arch/ia64/include/asm/sn/arch.h
index 7caa1f44cd95..7caa1f44cd95 100644
--- a/include/asm-ia64/sn/arch.h
+++ b/arch/ia64/include/asm/sn/arch.h
diff --git a/include/asm-ia64/sn/bte.h b/arch/ia64/include/asm/sn/bte.h
index a0d214f43115..a0d214f43115 100644
--- a/include/asm-ia64/sn/bte.h
+++ b/arch/ia64/include/asm/sn/bte.h
diff --git a/include/asm-ia64/sn/clksupport.h b/arch/ia64/include/asm/sn/clksupport.h
index d340c365a824..d340c365a824 100644
--- a/include/asm-ia64/sn/clksupport.h
+++ b/arch/ia64/include/asm/sn/clksupport.h
diff --git a/include/asm-ia64/sn/geo.h b/arch/ia64/include/asm/sn/geo.h
index f083c9434066..f083c9434066 100644
--- a/include/asm-ia64/sn/geo.h
+++ b/arch/ia64/include/asm/sn/geo.h
diff --git a/include/asm-ia64/sn/intr.h b/arch/ia64/include/asm/sn/intr.h
index e0487aa97418..e0487aa97418 100644
--- a/include/asm-ia64/sn/intr.h
+++ b/arch/ia64/include/asm/sn/intr.h
diff --git a/include/asm-ia64/sn/io.h b/arch/ia64/include/asm/sn/io.h
index 41c73a735628..41c73a735628 100644
--- a/include/asm-ia64/sn/io.h
+++ b/arch/ia64/include/asm/sn/io.h
diff --git a/include/asm-ia64/sn/ioc3.h b/arch/ia64/include/asm/sn/ioc3.h
index 95ed6cc83cf1..95ed6cc83cf1 100644
--- a/include/asm-ia64/sn/ioc3.h
+++ b/arch/ia64/include/asm/sn/ioc3.h
diff --git a/include/asm-ia64/sn/klconfig.h b/arch/ia64/include/asm/sn/klconfig.h
index bcbf209d63be..bcbf209d63be 100644
--- a/include/asm-ia64/sn/klconfig.h
+++ b/arch/ia64/include/asm/sn/klconfig.h
diff --git a/include/asm-ia64/sn/l1.h b/arch/ia64/include/asm/sn/l1.h
index 344bf44bb356..344bf44bb356 100644
--- a/include/asm-ia64/sn/l1.h
+++ b/arch/ia64/include/asm/sn/l1.h
diff --git a/include/asm-ia64/sn/leds.h b/arch/ia64/include/asm/sn/leds.h
index 66cf8c4d92c9..66cf8c4d92c9 100644
--- a/include/asm-ia64/sn/leds.h
+++ b/arch/ia64/include/asm/sn/leds.h
diff --git a/include/asm-ia64/sn/module.h b/arch/ia64/include/asm/sn/module.h
index 734e980ece2f..734e980ece2f 100644
--- a/include/asm-ia64/sn/module.h
+++ b/arch/ia64/include/asm/sn/module.h
diff --git a/include/asm-ia64/sn/mspec.h b/arch/ia64/include/asm/sn/mspec.h
index dbe13c6121a8..c1d3c50c3223 100644
--- a/include/asm-ia64/sn/mspec.h
+++ b/arch/ia64/include/asm/sn/mspec.h
@@ -4,7 +4,7 @@
  * License.  See the file "COPYING" in the main directory of this archive
  * for more details.
  *
- * Copyright (c) 2001-2004 Silicon Graphics, Inc.  All rights reserved.
+ * Copyright (c) 2001-2008 Silicon Graphics, Inc.  All rights reserved.
  */
 
 #ifndef _ASM_IA64_SN_MSPEC_H
@@ -32,26 +32,26 @@
 #ifdef __KERNEL__
 
 /*
- * Each Atomic Memory Operation (AMO formerly known as fetchop)
+ * Each Atomic Memory Operation (amo, formerly known as fetchop)
  * variable is 64 bytes long.  The first 8 bytes are used.  The
  * remaining 56 bytes are unaddressable due to the operation taking
  * that portion of the address.
  *
- * NOTE: The AMO_t _MUST_ be placed in either the first or second half
- * of the cache line.  The cache line _MUST NOT_ be used for anything
- * other than additional AMO_t entries.  This is because there are two
+ * NOTE: The amo structure _MUST_ be placed in either the first or second
+ * half of the cache line.  The cache line _MUST NOT_ be used for anything
+ * other than additional amo entries.  This is because there are two
  * addresses which reference the same physical cache line.  One will
  * be a cached entry with the memory type bits all set.  This address
- * may be loaded into processor cache.  The AMO_t will be referenced
+ * may be loaded into processor cache.  The amo will be referenced
  * uncached via the memory special memory type.  If any portion of the
  * cached cache-line is modified, when that line is flushed, it will
  * overwrite the uncached value in physical memory and lead to
  * inconsistency.
  */
-typedef struct {
+struct amo {
         u64 variable;
         u64 unused[7];
-} AMO_t;
+};
 
 
 #endif /* __KERNEL__ */
diff --git a/include/asm-ia64/sn/nodepda.h b/arch/ia64/include/asm/sn/nodepda.h
index ee118b901de4..ee118b901de4 100644
--- a/include/asm-ia64/sn/nodepda.h
+++ b/arch/ia64/include/asm/sn/nodepda.h
diff --git a/include/asm-ia64/sn/pcibr_provider.h b/arch/ia64/include/asm/sn/pcibr_provider.h
index da205b7cdaac..da205b7cdaac 100644
--- a/include/asm-ia64/sn/pcibr_provider.h
+++ b/arch/ia64/include/asm/sn/pcibr_provider.h
diff --git a/include/asm-ia64/sn/pcibus_provider_defs.h b/arch/ia64/include/asm/sn/pcibus_provider_defs.h
index 8f7c83d0f6d3..8f7c83d0f6d3 100644
--- a/include/asm-ia64/sn/pcibus_provider_defs.h
+++ b/arch/ia64/include/asm/sn/pcibus_provider_defs.h
diff --git a/include/asm-ia64/sn/pcidev.h b/arch/ia64/include/asm/sn/pcidev.h
index 1c2382cea807..1c2382cea807 100644
--- a/include/asm-ia64/sn/pcidev.h
+++ b/arch/ia64/include/asm/sn/pcidev.h
diff --git a/include/asm-ia64/sn/pda.h b/arch/ia64/include/asm/sn/pda.h
index 1c5108d44d8b..1c5108d44d8b 100644
--- a/include/asm-ia64/sn/pda.h
+++ b/arch/ia64/include/asm/sn/pda.h
diff --git a/include/asm-ia64/sn/pic.h b/arch/ia64/include/asm/sn/pic.h
index 5f9da5fd6e56..5f9da5fd6e56 100644
--- a/include/asm-ia64/sn/pic.h
+++ b/arch/ia64/include/asm/sn/pic.h
diff --git a/include/asm-ia64/sn/rw_mmr.h b/arch/ia64/include/asm/sn/rw_mmr.h
index 2d78f4c5a45e..2d78f4c5a45e 100644
--- a/include/asm-ia64/sn/rw_mmr.h
+++ b/arch/ia64/include/asm/sn/rw_mmr.h
diff --git a/include/asm-ia64/sn/shub_mmr.h b/arch/ia64/include/asm/sn/shub_mmr.h
index 7de1d1d4b71a..7de1d1d4b71a 100644
--- a/include/asm-ia64/sn/shub_mmr.h
+++ b/arch/ia64/include/asm/sn/shub_mmr.h
diff --git a/include/asm-ia64/sn/shubio.h b/arch/ia64/include/asm/sn/shubio.h
index 22a6f18a5313..22a6f18a5313 100644
--- a/include/asm-ia64/sn/shubio.h
+++ b/arch/ia64/include/asm/sn/shubio.h
diff --git a/include/asm-ia64/sn/simulator.h b/arch/ia64/include/asm/sn/simulator.h
index c2611f6cfe33..c2611f6cfe33 100644
--- a/include/asm-ia64/sn/simulator.h
+++ b/arch/ia64/include/asm/sn/simulator.h
diff --git a/include/asm-ia64/sn/sn2/sn_hwperf.h b/arch/ia64/include/asm/sn/sn2/sn_hwperf.h
index e61ebac38cdd..e61ebac38cdd 100644
--- a/include/asm-ia64/sn/sn2/sn_hwperf.h
+++ b/arch/ia64/include/asm/sn/sn2/sn_hwperf.h
diff --git a/include/asm-ia64/sn/sn_cpuid.h b/arch/ia64/include/asm/sn/sn_cpuid.h
index a676dd9ace3e..a676dd9ace3e 100644
--- a/include/asm-ia64/sn/sn_cpuid.h
+++ b/arch/ia64/include/asm/sn/sn_cpuid.h
diff --git a/include/asm-ia64/sn/sn_feature_sets.h b/arch/ia64/include/asm/sn/sn_feature_sets.h
index 8e83ac117ace..8e83ac117ace 100644
--- a/include/asm-ia64/sn/sn_feature_sets.h
+++ b/arch/ia64/include/asm/sn/sn_feature_sets.h
diff --git a/include/asm-ia64/sn/sn_sal.h b/arch/ia64/include/asm/sn/sn_sal.h
index 676b31a08c61..57e649d388b8 100644
--- a/include/asm-ia64/sn/sn_sal.h
+++ b/arch/ia64/include/asm/sn/sn_sal.h
@@ -1094,7 +1094,7 @@ ia64_sn_get_sn_info(int fc, u8 *shubtype, u16 *nasid_bitmask, u8 *nasid_shift,
 /*
  * This is the access point to the Altix PROM hardware performance
  * and status monitoring interface. For info on using this, see
- * include/asm-ia64/sn/sn2/sn_hwperf.h
+ * arch/ia64/include/asm/sn/sn2/sn_hwperf.h
  */
 static inline int
 ia64_sn_hwperf_op(nasid_t nasid, u64 opcode, u64 a0, u64 a1, u64 a2,
diff --git a/include/asm-ia64/sn/tioca.h b/arch/ia64/include/asm/sn/tioca.h
index 666222d7f0f6..666222d7f0f6 100644
--- a/include/asm-ia64/sn/tioca.h
+++ b/arch/ia64/include/asm/sn/tioca.h
diff --git a/include/asm-ia64/sn/tioca_provider.h b/arch/ia64/include/asm/sn/tioca_provider.h
index 9a820ac61be3..9a820ac61be3 100644
--- a/include/asm-ia64/sn/tioca_provider.h
+++ b/arch/ia64/include/asm/sn/tioca_provider.h
diff --git a/include/asm-ia64/sn/tioce.h b/arch/ia64/include/asm/sn/tioce.h
index 893468e1b41b..893468e1b41b 100644
--- a/include/asm-ia64/sn/tioce.h
+++ b/arch/ia64/include/asm/sn/tioce.h
diff --git a/include/asm-ia64/sn/tioce_provider.h b/arch/ia64/include/asm/sn/tioce_provider.h
index 32c32f30b099..32c32f30b099 100644
--- a/include/asm-ia64/sn/tioce_provider.h
+++ b/arch/ia64/include/asm/sn/tioce_provider.h
diff --git a/include/asm-ia64/sn/tiocp.h b/arch/ia64/include/asm/sn/tiocp.h
index e8ad0bb5b6c5..e8ad0bb5b6c5 100644
--- a/include/asm-ia64/sn/tiocp.h
+++ b/arch/ia64/include/asm/sn/tiocp.h
diff --git a/include/asm-ia64/sn/tiocx.h b/arch/ia64/include/asm/sn/tiocx.h
index d29728492f36..d29728492f36 100644
--- a/include/asm-ia64/sn/tiocx.h
+++ b/arch/ia64/include/asm/sn/tiocx.h
diff --git a/include/asm-ia64/sn/types.h b/arch/ia64/include/asm/sn/types.h
index 8e04ee211e59..8e04ee211e59 100644
--- a/include/asm-ia64/sn/types.h
+++ b/arch/ia64/include/asm/sn/types.h
diff --git a/include/asm-ia64/socket.h b/arch/ia64/include/asm/socket.h
index d5ef0aa3e312..d5ef0aa3e312 100644
--- a/include/asm-ia64/socket.h
+++ b/arch/ia64/include/asm/socket.h
diff --git a/include/asm-ia64/sockios.h b/arch/ia64/include/asm/sockios.h
index 15c92468ad38..15c92468ad38 100644
--- a/include/asm-ia64/sockios.h
+++ b/arch/ia64/include/asm/sockios.h
diff --git a/include/asm-ia64/sparsemem.h b/arch/ia64/include/asm/sparsemem.h
index 67a7c40ec27f..67a7c40ec27f 100644
--- a/include/asm-ia64/sparsemem.h
+++ b/arch/ia64/include/asm/sparsemem.h
diff --git a/include/asm-ia64/spinlock.h b/arch/ia64/include/asm/spinlock.h
index 0229fb95fb38..0229fb95fb38 100644
--- a/include/asm-ia64/spinlock.h
+++ b/arch/ia64/include/asm/spinlock.h
diff --git a/include/asm-ia64/spinlock_types.h b/arch/ia64/include/asm/spinlock_types.h
index 474e46f1ab4a..474e46f1ab4a 100644
--- a/include/asm-ia64/spinlock_types.h
+++ b/arch/ia64/include/asm/spinlock_types.h
diff --git a/include/asm-ia64/stat.h b/arch/ia64/include/asm/stat.h
index 367bb90cdffa..367bb90cdffa 100644
--- a/include/asm-ia64/stat.h
+++ b/arch/ia64/include/asm/stat.h
diff --git a/include/asm-ia64/statfs.h b/arch/ia64/include/asm/statfs.h
index 811097974f31..811097974f31 100644
--- a/include/asm-ia64/statfs.h
+++ b/arch/ia64/include/asm/statfs.h
diff --git a/include/asm-ia64/string.h b/arch/ia64/include/asm/string.h
index 85fd65c52a8c..85fd65c52a8c 100644
--- a/include/asm-ia64/string.h
+++ b/arch/ia64/include/asm/string.h
diff --git a/include/asm-ia64/suspend.h b/arch/ia64/include/asm/suspend.h
index b05bbb6074e2..b05bbb6074e2 100644
--- a/include/asm-ia64/suspend.h
+++ b/arch/ia64/include/asm/suspend.h
diff --git a/include/asm-ia64/system.h b/arch/ia64/include/asm/system.h
index 927a381c20ca..927a381c20ca 100644
--- a/include/asm-ia64/system.h
+++ b/arch/ia64/include/asm/system.h
diff --git a/include/asm-ia64/termbits.h b/arch/ia64/include/asm/termbits.h
index 9f162e0089ad..9f162e0089ad 100644
--- a/include/asm-ia64/termbits.h
+++ b/arch/ia64/include/asm/termbits.h
diff --git a/include/asm-ia64/termios.h b/arch/ia64/include/asm/termios.h
index 689d218c0c28..689d218c0c28 100644
--- a/include/asm-ia64/termios.h
+++ b/arch/ia64/include/asm/termios.h
diff --git a/arch/ia64/include/asm/thread_info.h b/arch/ia64/include/asm/thread_info.h
new file mode 100644
index 000000000000..7c60fcdd2efd
--- /dev/null
+++ b/arch/ia64/include/asm/thread_info.h
@@ -0,0 +1,148 @@
+/*
+ * Copyright (C) 2002-2003 Hewlett-Packard Co
+ *	David Mosberger-Tang <davidm@hpl.hp.com>
+ */
+#ifndef _ASM_IA64_THREAD_INFO_H
+#define _ASM_IA64_THREAD_INFO_H
+
+#ifndef ASM_OFFSETS_C
+#include <asm/asm-offsets.h>
+#endif
+#include <asm/processor.h>
+#include <asm/ptrace.h>
+
+#define PREEMPT_ACTIVE_BIT 30
+#define PREEMPT_ACTIVE	(1 << PREEMPT_ACTIVE_BIT)
+
+#ifndef __ASSEMBLY__
+
+/*
+ * On IA-64, we want to keep the task structure and kernel stack together, so they can be
+ * mapped by a single TLB entry and so they can be addressed by the "current" pointer
+ * without having to do pointer masking.
+ */
+struct thread_info {
+	struct task_struct *task;	/* XXX not really needed, except for dup_task_struct() */
+	struct exec_domain *exec_domain;/* execution domain */
+	__u32 flags;			/* thread_info flags (see TIF_*) */
+	__u32 cpu;			/* current CPU */
+	__u32 last_cpu;			/* Last CPU thread ran on */
+	__u32 status;			/* Thread synchronous flags */
+	mm_segment_t addr_limit;	/* user-level address space limit */
+	int preempt_count;		/* 0=premptable, <0=BUG; will also serve as bh-counter */
+	struct restart_block restart_block;
+#ifdef CONFIG_VIRT_CPU_ACCOUNTING
+	__u64 ac_stamp;
+	__u64 ac_leave;
+	__u64 ac_stime;
+	__u64 ac_utime;
+#endif
+};
+
+#define THREAD_SIZE			KERNEL_STACK_SIZE
+
+#define INIT_THREAD_INFO(tsk)			\
+{						\
+	.task		= &tsk,			\
+	.exec_domain	= &default_exec_domain,	\
+	.flags		= 0,			\
+	.cpu		= 0,			\
+	.addr_limit	= KERNEL_DS,		\
+	.preempt_count	= 0,			\
+	.restart_block = {			\
+		.fn = do_no_restart_syscall,	\
+	},					\
+}
+
+#define __HAVE_ARCH_THREAD_INFO_ALLOCATOR
+
+#ifndef ASM_OFFSETS_C
+/* how to get the thread information struct from C */
+#define current_thread_info()	((struct thread_info *) ((char *) current + IA64_TASK_SIZE))
+#define alloc_thread_info(tsk)	((struct thread_info *) ((char *) (tsk) + IA64_TASK_SIZE))
+#define task_thread_info(tsk)	((struct thread_info *) ((char *) (tsk) + IA64_TASK_SIZE))
+#else
+#define current_thread_info()	((struct thread_info *) 0)
+#define alloc_thread_info(tsk)	((struct thread_info *) 0)
+#define task_thread_info(tsk)	((struct thread_info *) 0)
+#endif
+#define free_thread_info(ti)	/* nothing */
+#define task_stack_page(tsk)	((void *)(tsk))
+
+#define __HAVE_THREAD_FUNCTIONS
+#ifdef CONFIG_VIRT_CPU_ACCOUNTING
+#define setup_thread_stack(p, org)			\
+	*task_thread_info(p) = *task_thread_info(org);	\
+	task_thread_info(p)->ac_stime = 0;		\
+	task_thread_info(p)->ac_utime = 0;		\
+	task_thread_info(p)->task = (p);
+#else
+#define setup_thread_stack(p, org) \
+	*task_thread_info(p) = *task_thread_info(org); \
+	task_thread_info(p)->task = (p);
+#endif
+#define end_of_stack(p) (unsigned long *)((void *)(p) + IA64_RBS_OFFSET)
+
+#define __HAVE_ARCH_TASK_STRUCT_ALLOCATOR
+#define alloc_task_struct()	((struct task_struct *)__get_free_pages(GFP_KERNEL | __GFP_COMP, KERNEL_STACK_SIZE_ORDER))
+#define free_task_struct(tsk)	free_pages((unsigned long) (tsk), KERNEL_STACK_SIZE_ORDER)
+
+#define tsk_set_notify_resume(tsk) \
+	set_ti_thread_flag(task_thread_info(tsk), TIF_NOTIFY_RESUME)
+extern void tsk_clear_notify_resume(struct task_struct *tsk);
+#endif /* !__ASSEMBLY */
+
+/*
+ * thread information flags
+ * - these are process state flags that various assembly files may need to access
+ * - pending work-to-be-done flags are in least-significant 16 bits, other flags
+ *   in top 16 bits
+ */
+#define TIF_SIGPENDING		0	/* signal pending */
+#define TIF_NEED_RESCHED	1	/* rescheduling necessary */
+#define TIF_SYSCALL_TRACE	2	/* syscall trace active */
+#define TIF_SYSCALL_AUDIT	3	/* syscall auditing active */
+#define TIF_SINGLESTEP		4	/* restore singlestep on return to user mode */
+#define TIF_NOTIFY_RESUME	6	/* resumption notification requested */
+#define TIF_POLLING_NRFLAG	16	/* true if poll_idle() is polling TIF_NEED_RESCHED */
+#define TIF_MEMDIE		17
+#define TIF_MCA_INIT		18	/* this task is processing MCA or INIT */
+#define TIF_DB_DISABLED		19	/* debug trap disabled for fsyscall */
+#define TIF_FREEZE		20	/* is freezing for suspend */
+#define TIF_RESTORE_RSE		21	/* user RBS is newer than kernel RBS */
+
+#define _TIF_SYSCALL_TRACE	(1 << TIF_SYSCALL_TRACE)
+#define _TIF_SYSCALL_AUDIT	(1 << TIF_SYSCALL_AUDIT)
+#define _TIF_SINGLESTEP		(1 << TIF_SINGLESTEP)
+#define _TIF_SYSCALL_TRACEAUDIT	(_TIF_SYSCALL_TRACE|_TIF_SYSCALL_AUDIT|_TIF_SINGLESTEP)
+#define _TIF_NOTIFY_RESUME	(1 << TIF_NOTIFY_RESUME)
+#define _TIF_SIGPENDING		(1 << TIF_SIGPENDING)
+#define _TIF_NEED_RESCHED	(1 << TIF_NEED_RESCHED)
+#define _TIF_POLLING_NRFLAG	(1 << TIF_POLLING_NRFLAG)
+#define _TIF_MCA_INIT		(1 << TIF_MCA_INIT)
+#define _TIF_DB_DISABLED	(1 << TIF_DB_DISABLED)
+#define _TIF_FREEZE		(1 << TIF_FREEZE)
+#define _TIF_RESTORE_RSE	(1 << TIF_RESTORE_RSE)
+
+/* "work to do on user-return" bits */
+#define TIF_ALLWORK_MASK	(_TIF_SIGPENDING|_TIF_NOTIFY_RESUME|_TIF_SYSCALL_AUDIT|\
+				 _TIF_NEED_RESCHED|_TIF_SYSCALL_TRACE)
+/* like TIF_ALLWORK_BITS but sans TIF_SYSCALL_TRACE or TIF_SYSCALL_AUDIT */
+#define TIF_WORK_MASK		(TIF_ALLWORK_MASK&~(_TIF_SYSCALL_TRACE|_TIF_SYSCALL_AUDIT))
+
+#define TS_POLLING		1 	/* true if in idle loop and not sleeping */
+#define TS_RESTORE_SIGMASK	2	/* restore signal mask in do_signal() */
+
+#define tsk_is_polling(t) (task_thread_info(t)->status & TS_POLLING)
+
+#ifndef __ASSEMBLY__
+#define HAVE_SET_RESTORE_SIGMASK	1
+static inline void set_restore_sigmask(void)
+{
+	struct thread_info *ti = current_thread_info();
+	ti->status |= TS_RESTORE_SIGMASK;
+	set_bit(TIF_SIGPENDING, &ti->flags);
+}
+#endif	/* !__ASSEMBLY__ */
+
+#endif /* _ASM_IA64_THREAD_INFO_H */
diff --git a/include/asm-ia64/timex.h b/arch/ia64/include/asm/timex.h
index 05a6baf8a472..05a6baf8a472 100644
--- a/include/asm-ia64/timex.h
+++ b/arch/ia64/include/asm/timex.h
diff --git a/include/asm-ia64/tlb.h b/arch/ia64/include/asm/tlb.h
index 20d8a39680c2..20d8a39680c2 100644
--- a/include/asm-ia64/tlb.h
+++ b/arch/ia64/include/asm/tlb.h
diff --git a/include/asm-ia64/tlbflush.h b/arch/ia64/include/asm/tlbflush.h
index 3be25dfed164..3be25dfed164 100644
--- a/include/asm-ia64/tlbflush.h
+++ b/arch/ia64/include/asm/tlbflush.h
diff --git a/arch/ia64/include/asm/topology.h b/arch/ia64/include/asm/topology.h
new file mode 100644
index 000000000000..35bcb641c9e5
--- /dev/null
+++ b/arch/ia64/include/asm/topology.h
@@ -0,0 +1,126 @@
+/*
+ * Copyright (C) 2002, Erich Focht, NEC
+ *
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+#ifndef _ASM_IA64_TOPOLOGY_H
+#define _ASM_IA64_TOPOLOGY_H
+
+#include <asm/acpi.h>
+#include <asm/numa.h>
+#include <asm/smp.h>
+
+#ifdef CONFIG_NUMA
+
+/* Nodes w/o CPUs are preferred for memory allocations, see build_zonelists */
+#define PENALTY_FOR_NODE_WITH_CPUS 255
+
+/*
+ * Distance above which we begin to use zone reclaim
+ */
+#define RECLAIM_DISTANCE 15
+
+/*
+ * Returns the number of the node containing CPU 'cpu'
+ */
+#define cpu_to_node(cpu) (int)(cpu_to_node_map[cpu])
+
+/*
+ * Returns a bitmask of CPUs on Node 'node'.
+ */
+#define node_to_cpumask(node) (node_to_cpu_mask[node])
+
+/*
+ * Returns the number of the node containing Node 'nid'.
+ * Not implemented here. Multi-level hierarchies detected with
+ * the help of node_distance().
+ */
+#define parent_node(nid) (nid)
+
+/*
+ * Returns the number of the first CPU on Node 'node'.
+ */
+#define node_to_first_cpu(node) (first_cpu(node_to_cpumask(node)))
+
+/*
+ * Determines the node for a given pci bus
+ */
+#define pcibus_to_node(bus) PCI_CONTROLLER(bus)->node
+
+void build_cpu_to_node_map(void);
+
+#define SD_CPU_INIT (struct sched_domain) {		\
+	.span			= CPU_MASK_NONE,	\
+	.parent			= NULL,			\
+	.child			= NULL,			\
+	.groups			= NULL,			\
+	.min_interval		= 1,			\
+	.max_interval		= 4,			\
+	.busy_factor		= 64,			\
+	.imbalance_pct		= 125,			\
+	.cache_nice_tries	= 2,			\
+	.busy_idx		= 2,			\
+	.idle_idx		= 1,			\
+	.newidle_idx		= 2,			\
+	.wake_idx		= 1,			\
+	.forkexec_idx		= 1,			\
+	.flags			= SD_LOAD_BALANCE	\
+				| SD_BALANCE_NEWIDLE	\
+				| SD_BALANCE_EXEC	\
+				| SD_WAKE_AFFINE,	\
+	.last_balance		= jiffies,		\
+	.balance_interval	= 1,			\
+	.nr_balance_failed	= 0,			\
+}
+
+/* sched_domains SD_NODE_INIT for IA64 NUMA machines */
+#define SD_NODE_INIT (struct sched_domain) {		\
+	.span			= CPU_MASK_NONE,	\
+	.parent			= NULL,			\
+	.child			= NULL,			\
+	.groups			= NULL,			\
+	.min_interval		= 8,			\
+	.max_interval		= 8*(min(num_online_cpus(), 32)), \
+	.busy_factor		= 64,			\
+	.imbalance_pct		= 125,			\
+	.cache_nice_tries	= 2,			\
+	.busy_idx		= 3,			\
+	.idle_idx		= 2,			\
+	.newidle_idx		= 2,			\
+	.wake_idx		= 1,			\
+	.forkexec_idx		= 1,			\
+	.flags			= SD_LOAD_BALANCE	\
+				| SD_BALANCE_EXEC	\
+				| SD_BALANCE_FORK	\
+				| SD_SERIALIZE		\
+				| SD_WAKE_BALANCE,	\
+	.last_balance		= jiffies,		\
+	.balance_interval	= 64,			\
+	.nr_balance_failed	= 0,			\
+}
+
+#endif /* CONFIG_NUMA */
+
+#ifdef CONFIG_SMP
+#define topology_physical_package_id(cpu)	(cpu_data(cpu)->socket_id)
+#define topology_core_id(cpu)			(cpu_data(cpu)->core_id)
+#define topology_core_siblings(cpu)		(cpu_core_map[cpu])
+#define topology_thread_siblings(cpu)		(per_cpu(cpu_sibling_map, cpu))
+#define smt_capable() 				(smp_num_siblings > 1)
+#endif
+
+extern void arch_fix_phys_package_id(int num, u32 slot);
+
+#define pcibus_to_cpumask(bus)	(pcibus_to_node(bus) == -1 ? \
+					CPU_MASK_ALL : \
+					node_to_cpumask(pcibus_to_node(bus)) \
+				)
+
+#include <asm-generic/topology.h>
+
+#endif /* _ASM_IA64_TOPOLOGY_H */
diff --git a/include/asm-ia64/types.h b/arch/ia64/include/asm/types.h
index e36b3716e718..e36b3716e718 100644
--- a/include/asm-ia64/types.h
+++ b/arch/ia64/include/asm/types.h
diff --git a/include/asm-ia64/uaccess.h b/arch/ia64/include/asm/uaccess.h
index 449c8c0fa2bd..449c8c0fa2bd 100644
--- a/include/asm-ia64/uaccess.h
+++ b/arch/ia64/include/asm/uaccess.h
diff --git a/include/asm-ia64/ucontext.h b/arch/ia64/include/asm/ucontext.h
index bf573dc8ca6a..bf573dc8ca6a 100644
--- a/include/asm-ia64/ucontext.h
+++ b/arch/ia64/include/asm/ucontext.h
diff --git a/include/asm-ia64/unaligned.h b/arch/ia64/include/asm/unaligned.h
index 7bddc7f58584..7bddc7f58584 100644
--- a/include/asm-ia64/unaligned.h
+++ b/arch/ia64/include/asm/unaligned.h
diff --git a/include/asm-ia64/uncached.h b/arch/ia64/include/asm/uncached.h
index 13d7e65ca3cc..13d7e65ca3cc 100644
--- a/include/asm-ia64/uncached.h
+++ b/arch/ia64/include/asm/uncached.h
diff --git a/arch/ia64/include/asm/unistd.h b/arch/ia64/include/asm/unistd.h
new file mode 100644
index 000000000000..d535833aab5e
--- /dev/null
+++ b/arch/ia64/include/asm/unistd.h
@@ -0,0 +1,384 @@
+#ifndef _ASM_IA64_UNISTD_H
+#define _ASM_IA64_UNISTD_H
+
+/*
+ * IA-64 Linux syscall numbers and inline-functions.
+ *
+ * Copyright (C) 1998-2005 Hewlett-Packard Co
+ *	David Mosberger-Tang <davidm@hpl.hp.com>
+ */
+
+#include <asm/break.h>
+
+#define __BREAK_SYSCALL			__IA64_BREAK_SYSCALL
+
+#define __NR_ni_syscall			1024
+#define __NR_exit			1025
+#define __NR_read			1026
+#define __NR_write			1027
+#define __NR_open			1028
+#define __NR_close			1029
+#define __NR_creat			1030
+#define __NR_link			1031
+#define __NR_unlink			1032
+#define __NR_execve			1033
+#define __NR_chdir			1034
+#define __NR_fchdir			1035
+#define __NR_utimes			1036
+#define __NR_mknod			1037
+#define __NR_chmod			1038
+#define __NR_chown			1039
+#define __NR_lseek			1040
+#define __NR_getpid			1041
+#define __NR_getppid			1042
+#define __NR_mount			1043
+#define __NR_umount			1044
+#define __NR_setuid			1045
+#define __NR_getuid			1046
+#define __NR_geteuid			1047
+#define __NR_ptrace			1048
+#define __NR_access			1049
+#define __NR_sync			1050
+#define __NR_fsync			1051
+#define __NR_fdatasync			1052
+#define __NR_kill			1053
+#define __NR_rename			1054
+#define __NR_mkdir			1055
+#define __NR_rmdir			1056
+#define __NR_dup			1057
+#define __NR_pipe			1058
+#define __NR_times			1059
+#define __NR_brk			1060
+#define __NR_setgid			1061
+#define __NR_getgid			1062
+#define __NR_getegid			1063
+#define __NR_acct			1064
+#define __NR_ioctl			1065
+#define __NR_fcntl			1066
+#define __NR_umask			1067
+#define __NR_chroot			1068
+#define __NR_ustat			1069
+#define __NR_dup2			1070
+#define __NR_setreuid			1071
+#define __NR_setregid			1072
+#define __NR_getresuid			1073
+#define __NR_setresuid			1074
+#define __NR_getresgid			1075
+#define __NR_setresgid			1076
+#define __NR_getgroups			1077
+#define __NR_setgroups			1078
+#define __NR_getpgid			1079
+#define __NR_setpgid			1080
+#define __NR_setsid			1081
+#define __NR_getsid			1082
+#define __NR_sethostname		1083
+#define __NR_setrlimit			1084
+#define __NR_getrlimit			1085
+#define __NR_getrusage			1086
+#define __NR_gettimeofday		1087
+#define __NR_settimeofday		1088
+#define __NR_select			1089
+#define __NR_poll			1090
+#define __NR_symlink			1091
+#define __NR_readlink			1092
+#define __NR_uselib			1093
+#define __NR_swapon			1094
+#define __NR_swapoff			1095
+#define __NR_reboot			1096
+#define __NR_truncate			1097
+#define __NR_ftruncate			1098
+#define __NR_fchmod			1099
+#define __NR_fchown			1100
+#define __NR_getpriority		1101
+#define __NR_setpriority		1102
+#define __NR_statfs			1103
+#define __NR_fstatfs			1104
+#define __NR_gettid			1105
+#define __NR_semget			1106
+#define __NR_semop			1107
+#define __NR_semctl			1108
+#define __NR_msgget			1109
+#define __NR_msgsnd			1110
+#define __NR_msgrcv			1111
+#define __NR_msgctl			1112
+#define __NR_shmget			1113
+#define __NR_shmat			1114
+#define __NR_shmdt			1115
+#define __NR_shmctl			1116
+/* also known as klogctl() in GNU libc: */
+#define __NR_syslog			1117
+#define __NR_setitimer			1118
+#define __NR_getitimer			1119
+/* 1120 was __NR_old_stat */
+/* 1121 was __NR_old_lstat */
+/* 1122 was __NR_old_fstat */
+#define __NR_vhangup			1123
+#define __NR_lchown			1124
+#define __NR_remap_file_pages		1125
+#define __NR_wait4			1126
+#define __NR_sysinfo			1127
+#define __NR_clone			1128
+#define __NR_setdomainname		1129
+#define __NR_uname			1130
+#define __NR_adjtimex			1131
+/* 1132 was __NR_create_module */
+#define __NR_init_module		1133
+#define __NR_delete_module		1134
+/* 1135 was __NR_get_kernel_syms */
+/* 1136 was __NR_query_module */
+#define __NR_quotactl			1137
+#define __NR_bdflush			1138
+#define __NR_sysfs			1139
+#define __NR_personality		1140
+#define __NR_afs_syscall		1141
+#define __NR_setfsuid			1142
+#define __NR_setfsgid			1143
+#define __NR_getdents			1144
+#define __NR_flock			1145
+#define __NR_readv			1146
+#define __NR_writev			1147
+#define __NR_pread64			1148
+#define __NR_pwrite64			1149
+#define __NR__sysctl			1150
+#define __NR_mmap			1151
+#define __NR_munmap			1152
+#define __NR_mlock			1153
+#define __NR_mlockall			1154
+#define __NR_mprotect			1155
+#define __NR_mremap			1156
+#define __NR_msync			1157
+#define __NR_munlock			1158
+#define __NR_munlockall			1159
+#define __NR_sched_getparam		1160
+#define __NR_sched_setparam		1161
+#define __NR_sched_getscheduler		1162
+#define __NR_sched_setscheduler		1163
+#define __NR_sched_yield		1164
+#define __NR_sched_get_priority_max	1165
+#define __NR_sched_get_priority_min	1166
+#define __NR_sched_rr_get_interval	1167
+#define __NR_nanosleep			1168
+#define __NR_nfsservctl			1169
+#define __NR_prctl			1170
+/* 1171 is reserved for backwards compatibility with old __NR_getpagesize */
+#define __NR_mmap2			1172
+#define __NR_pciconfig_read		1173
+#define __NR_pciconfig_write		1174
+#define __NR_perfmonctl			1175
+#define __NR_sigaltstack		1176
+#define __NR_rt_sigaction		1177
+#define __NR_rt_sigpending		1178
+#define __NR_rt_sigprocmask		1179
+#define __NR_rt_sigqueueinfo		1180
+#define __NR_rt_sigreturn		1181
+#define __NR_rt_sigsuspend		1182
+#define __NR_rt_sigtimedwait		1183
+#define __NR_getcwd			1184
+#define __NR_capget			1185
+#define __NR_capset			1186
+#define __NR_sendfile			1187
+#define __NR_getpmsg			1188
+#define __NR_putpmsg			1189
+#define __NR_socket			1190
+#define __NR_bind			1191
+#define __NR_connect			1192
+#define __NR_listen			1193
+#define __NR_accept			1194
+#define __NR_getsockname		1195
+#define __NR_getpeername		1196
+#define __NR_socketpair			1197
+#define __NR_send			1198
+#define __NR_sendto			1199
+#define __NR_recv			1200
+#define __NR_recvfrom			1201
+#define __NR_shutdown			1202
+#define __NR_setsockopt			1203
+#define __NR_getsockopt			1204
+#define __NR_sendmsg			1205
+#define __NR_recvmsg			1206
+#define __NR_pivot_root			1207
+#define __NR_mincore			1208
+#define __NR_madvise			1209
+#define __NR_stat			1210
+#define __NR_lstat			1211
+#define __NR_fstat			1212
+#define __NR_clone2			1213
+#define __NR_getdents64			1214
+#define __NR_getunwind			1215
+#define __NR_readahead			1216
+#define __NR_setxattr			1217
+#define __NR_lsetxattr			1218
+#define __NR_fsetxattr			1219
+#define __NR_getxattr			1220
+#define __NR_lgetxattr			1221
+#define __NR_fgetxattr			1222
+#define __NR_listxattr			1223
+#define __NR_llistxattr			1224
+#define __NR_flistxattr			1225
+#define __NR_removexattr		1226
+#define __NR_lremovexattr		1227
+#define __NR_fremovexattr		1228
+#define __NR_tkill			1229
+#define __NR_futex			1230
+#define __NR_sched_setaffinity		1231
+#define __NR_sched_getaffinity		1232
+#define __NR_set_tid_address		1233
+#define __NR_fadvise64			1234
+#define __NR_tgkill			1235
+#define __NR_exit_group			1236
+#define __NR_lookup_dcookie		1237
+#define __NR_io_setup			1238
+#define __NR_io_destroy			1239
+#define __NR_io_getevents		1240
+#define __NR_io_submit			1241
+#define __NR_io_cancel			1242
+#define __NR_epoll_create		1243
+#define __NR_epoll_ctl			1244
+#define __NR_epoll_wait			1245
+#define __NR_restart_syscall		1246
+#define __NR_semtimedop			1247
+#define __NR_timer_create		1248
+#define __NR_timer_settime		1249
+#define __NR_timer_gettime		1250
+#define __NR_timer_getoverrun		1251
+#define __NR_timer_delete		1252
+#define __NR_clock_settime		1253
+#define __NR_clock_gettime		1254
+#define __NR_clock_getres		1255
+#define __NR_clock_nanosleep		1256
+#define __NR_fstatfs64			1257
+#define __NR_statfs64			1258
+#define __NR_mbind			1259
+#define __NR_get_mempolicy		1260
+#define __NR_set_mempolicy		1261
+#define __NR_mq_open			1262
+#define __NR_mq_unlink			1263
+#define __NR_mq_timedsend		1264
+#define __NR_mq_timedreceive		1265
+#define __NR_mq_notify			1266
+#define __NR_mq_getsetattr		1267
+#define __NR_kexec_load			1268
+#define __NR_vserver			1269
+#define __NR_waitid			1270
+#define __NR_add_key			1271
+#define __NR_request_key		1272
+#define __NR_keyctl			1273
+#define __NR_ioprio_set			1274
+#define __NR_ioprio_get			1275
+#define __NR_move_pages			1276
+#define __NR_inotify_init		1277
+#define __NR_inotify_add_watch		1278
+#define __NR_inotify_rm_watch		1279
+#define __NR_migrate_pages		1280
+#define __NR_openat			1281
+#define __NR_mkdirat			1282
+#define __NR_mknodat			1283
+#define __NR_fchownat			1284
+#define __NR_futimesat			1285
+#define __NR_newfstatat			1286
+#define __NR_unlinkat			1287
+#define __NR_renameat			1288
+#define __NR_linkat			1289
+#define __NR_symlinkat			1290
+#define __NR_readlinkat			1291
+#define __NR_fchmodat			1292
+#define __NR_faccessat			1293
+#define __NR_pselect6			1294
+#define __NR_ppoll			1295
+#define __NR_unshare			1296
+#define __NR_splice			1297
+#define __NR_set_robust_list		1298
+#define __NR_get_robust_list		1299
+#define __NR_sync_file_range		1300
+#define __NR_tee			1301
+#define __NR_vmsplice			1302
+#define __NR_fallocate			1303
+#define __NR_getcpu			1304
+#define __NR_epoll_pwait		1305
+#define __NR_utimensat			1306
+#define __NR_signalfd			1307
+#define __NR_timerfd			1308
+#define __NR_eventfd			1309
+#define __NR_timerfd_create		1310
+#define __NR_timerfd_settime		1311
+#define __NR_timerfd_gettime		1312
+#define __NR_signalfd4			1313
+#define __NR_eventfd2			1314
+#define __NR_epoll_create1		1315
+#define __NR_dup3			1316
+#define __NR_pipe2			1317
+#define __NR_inotify_init1		1318
+
+#ifdef __KERNEL__
+
+
+#define NR_syscalls			295 /* length of syscall table */
+
+/*
+ * The following defines stop scripts/checksyscalls.sh from complaining about
+ * unimplemented system calls.  Glibc provides for each of these by using
+ * more modern equivalent system calls.
+ */
+#define __IGNORE_fork		/* clone() */
+#define __IGNORE_time		/* gettimeofday() */
+#define __IGNORE_alarm		/* setitimer(ITIMER_REAL, ... */
+#define __IGNORE_pause		/* rt_sigprocmask(), rt_sigsuspend() */
+#define __IGNORE_utime		/* utimes() */
+#define __IGNORE_getpgrp	/* getpgid() */
+#define __IGNORE_vfork		/* clone() */
+
+#define __ARCH_WANT_SYS_RT_SIGACTION
+#define __ARCH_WANT_SYS_RT_SIGSUSPEND
+
+#ifdef CONFIG_IA32_SUPPORT
+# define __ARCH_WANT_SYS_FADVISE64
+# define __ARCH_WANT_SYS_GETPGRP
+# define __ARCH_WANT_SYS_LLSEEK
+# define __ARCH_WANT_SYS_NICE
+# define __ARCH_WANT_SYS_OLD_GETRLIMIT
+# define __ARCH_WANT_SYS_OLDUMOUNT
+# define __ARCH_WANT_SYS_SIGPENDING
+# define __ARCH_WANT_SYS_SIGPROCMASK
+# define __ARCH_WANT_COMPAT_SYS_RT_SIGSUSPEND
+# define __ARCH_WANT_COMPAT_SYS_TIME
+#endif
+
+#if !defined(__ASSEMBLY__) && !defined(ASSEMBLER)
+
+#include <linux/types.h>
+#include <linux/linkage.h>
+#include <linux/compiler.h>
+
+extern long __ia64_syscall (long a0, long a1, long a2, long a3, long a4, long nr);
+
+asmlinkage unsigned long sys_mmap(
+				unsigned long addr, unsigned long len,
+				int prot, int flags,
+				int fd, long off);
+asmlinkage unsigned long sys_mmap2(
+				unsigned long addr, unsigned long len,
+				int prot, int flags,
+				int fd, long pgoff);
+struct pt_regs;
+struct sigaction;
+long sys_execve(char __user *filename, char __user * __user *argv,
+			   char __user * __user *envp, struct pt_regs *regs);
+asmlinkage long sys_pipe(void);
+asmlinkage long sys_rt_sigaction(int sig,
+				 const struct sigaction __user *act,
+				 struct sigaction __user *oact,
+				 size_t sigsetsize);
+
+/*
+ * "Conditional" syscalls
+ *
+ * Note, this macro can only be used in the file which defines sys_ni_syscall, i.e., in
+ * kernel/sys_ni.c.  This version causes warnings because the declaration isn't a
+ * proper prototype, but we can't use __typeof__ either, because not all cond_syscall()
+ * declarations have prototypes at the moment.
+ */
+#define cond_syscall(x) asmlinkage long x (void) __attribute__((weak,alias("sys_ni_syscall")))
+
+#endif /* !__ASSEMBLY__ */
+#endif /* __KERNEL__ */
+#endif /* _ASM_IA64_UNISTD_H */
diff --git a/include/asm-ia64/unwind.h b/arch/ia64/include/asm/unwind.h
index 1af3875f1a57..1af3875f1a57 100644
--- a/include/asm-ia64/unwind.h
+++ b/arch/ia64/include/asm/unwind.h
diff --git a/include/asm-ia64/user.h b/arch/ia64/include/asm/user.h
index 8b9821110348..8b9821110348 100644
--- a/include/asm-ia64/user.h
+++ b/arch/ia64/include/asm/user.h
diff --git a/include/asm-ia64/ustack.h b/arch/ia64/include/asm/ustack.h
index 504167c35b8b..504167c35b8b 100644
--- a/include/asm-ia64/ustack.h
+++ b/arch/ia64/include/asm/ustack.h
diff --git a/include/asm-ia64/uv/uv_hub.h b/arch/ia64/include/asm/uv/uv_hub.h
index f607018af4a1..f607018af4a1 100644
--- a/include/asm-ia64/uv/uv_hub.h
+++ b/arch/ia64/include/asm/uv/uv_hub.h
diff --git a/include/asm-ia64/uv/uv_mmrs.h b/arch/ia64/include/asm/uv/uv_mmrs.h
index c149ef085437..c149ef085437 100644
--- a/include/asm-ia64/uv/uv_mmrs.h
+++ b/arch/ia64/include/asm/uv/uv_mmrs.h
diff --git a/include/asm-ia64/vga.h b/arch/ia64/include/asm/vga.h
index 02184ecd8208..02184ecd8208 100644
--- a/include/asm-ia64/vga.h
+++ b/arch/ia64/include/asm/vga.h
diff --git a/arch/ia64/include/asm/xor.h b/arch/ia64/include/asm/xor.h
new file mode 100644
index 000000000000..a349e23dea15
--- /dev/null
+++ b/arch/ia64/include/asm/xor.h
@@ -0,0 +1,31 @@
+/*
+ * Optimized RAID-5 checksumming functions for IA-64.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * You should have received a copy of the GNU General Public License
+ * (for example /usr/src/linux/COPYING); if not, write to the Free
+ * Software Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+
+extern void xor_ia64_2(unsigned long, unsigned long *, unsigned long *);
+extern void xor_ia64_3(unsigned long, unsigned long *, unsigned long *,
+		       unsigned long *);
+extern void xor_ia64_4(unsigned long, unsigned long *, unsigned long *,
+		       unsigned long *, unsigned long *);
+extern void xor_ia64_5(unsigned long, unsigned long *, unsigned long *,
+		       unsigned long *, unsigned long *, unsigned long *);
+
+static struct xor_block_template xor_block_ia64 = {
+	.name =	"ia64",
+	.do_2 =	xor_ia64_2,
+	.do_3 =	xor_ia64_3,
+	.do_4 =	xor_ia64_4,
+	.do_5 =	xor_ia64_5,
+};
+
+#define XOR_TRY_TEMPLATES	xor_speed(&xor_block_ia64)
diff --git a/arch/ia64/kernel/.gitignore b/arch/ia64/kernel/.gitignore
index 98307759a3b8..21cb0da5ded8 100644
--- a/arch/ia64/kernel/.gitignore
+++ b/arch/ia64/kernel/.gitignore
@@ -1 +1,2 @@
 gate.lds
+vmlinux.lds
diff --git a/arch/ia64/kernel/asm-offsets.c b/arch/ia64/kernel/asm-offsets.c
index c64a55af9b95..94c44b1ccfd0 100644
--- a/arch/ia64/kernel/asm-offsets.c
+++ b/arch/ia64/kernel/asm-offsets.c
@@ -10,11 +10,11 @@
 #include <linux/pid.h>
 #include <linux/clocksource.h>
 #include <linux/kbuild.h>
-#include <asm-ia64/processor.h>
-#include <asm-ia64/ptrace.h>
-#include <asm-ia64/siginfo.h>
-#include <asm-ia64/sigcontext.h>
-#include <asm-ia64/mca.h>
+#include <asm/processor.h>
+#include <asm/ptrace.h>
+#include <asm/siginfo.h>
+#include <asm/sigcontext.h>
+#include <asm/mca.h>
 
 #include "../kernel/sigframe.h"
 #include "../kernel/fsyscall_gtod_data.h"
diff --git a/arch/ia64/kernel/entry.S b/arch/ia64/kernel/entry.S
index 56ab156c48ae..0dd6c1419d8d 100644
--- a/arch/ia64/kernel/entry.S
+++ b/arch/ia64/kernel/entry.S
@@ -1691,6 +1691,12 @@ sys_call_table:
 	data8 sys_timerfd_create		// 1310
 	data8 sys_timerfd_settime
 	data8 sys_timerfd_gettime
+	data8 sys_signalfd4
+	data8 sys_eventfd2
+	data8 sys_epoll_create1			// 1315
+	data8 sys_dup3
+	data8 sys_pipe2
+	data8 sys_inotify_init1
 
 	.org sys_call_table + 8*NR_syscalls	// guard against failures to increase NR_syscalls
 #endif /* __IA64_ASM_PARAVIRTUALIZED_NATIVE */
diff --git a/arch/ia64/kernel/head.S b/arch/ia64/kernel/head.S
index db540e58c783..8bdea8eb62e3 100644
--- a/arch/ia64/kernel/head.S
+++ b/arch/ia64/kernel/head.S
@@ -359,7 +359,31 @@ start_ap:
 	mov ar.rsc=0		// place RSE in enforced lazy mode
 	;;
 	loadrs			// clear the dirty partition
-	mov IA64_KR(PER_CPU_DATA)=r0	// clear physical per-CPU base
+	movl r19=__phys_per_cpu_start
+	mov r18=PERCPU_PAGE_SIZE
+	;;
+#ifndef CONFIG_SMP
+	add r19=r19,r18
+	;;
+#else
+(isAP)	br.few 2f
+	mov r20=r19
+	sub r19=r19,r18
+	;;
+	shr.u r18=r18,3
+1:
+	ld8 r21=[r20],8;;
+	st8[r19]=r21,8
+	adds r18=-1,r18;;
+	cmp4.lt p7,p6=0,r18
+(p7)	br.cond.dptk.few 1b
+2:
+#endif
+	tpa r19=r19
+	;;
+	.pred.rel.mutex isBP,isAP
+(isBP)	mov IA64_KR(PER_CPU_DATA)=r19	// per-CPU base for cpu0
+(isAP)	mov IA64_KR(PER_CPU_DATA)=r0	// clear physical per-CPU base
 	;;
 	mov ar.bspstore=r2	// establish the new RSE stack
 	;;
@@ -1123,7 +1147,7 @@ SET_REG(b5);
 	 *   p15    - used to track flag status.
 	 *
 	 * If you patch this code to use more registers, do not forget to update
-	 * the clobber lists for spin_lock() in include/asm-ia64/spinlock.h.
+	 * the clobber lists for spin_lock() in arch/ia64/include/asm/spinlock.h.
 	 */
 
 #if (__GNUC__ == 3 && __GNUC_MINOR__ < 3)
diff --git a/arch/ia64/kernel/iosapic.c b/arch/ia64/kernel/iosapic.c
index 3bc2fa64f87f..5c4674ae8aea 100644
--- a/arch/ia64/kernel/iosapic.c
+++ b/arch/ia64/kernel/iosapic.c
@@ -69,7 +69,7 @@
  *     systems, we use one-to-one mapping between IA-64 vector and IRQ.  A
  *     platform can implement platform_irq_to_vector(irq) and
  *     platform_local_vector_to_irq(vector) APIs to differentiate the mapping.
- *     Please see also include/asm-ia64/hw_irq.h for those APIs.
+ *     Please see also arch/ia64/include/asm/hw_irq.h for those APIs.
  *
  * To sum up, there are three levels of mappings involved:
  *
diff --git a/arch/ia64/kernel/ivt.S b/arch/ia64/kernel/ivt.S
index c39627df3cde..416a952b19bd 100644
--- a/arch/ia64/kernel/ivt.S
+++ b/arch/ia64/kernel/ivt.S
@@ -1243,11 +1243,11 @@ ENTRY(speculation_vector)
 
 	add r17=r17,r18			// now add the offset
 	;;
-	MOV_FROM_IIP(r17)
+	MOV_TO_IIP(r17, r19)
 	dep r16=0,r16,41,2		// clear EI
 	;;
 
-	MOV_FROM_IPSR(p0, r16)
+	MOV_TO_IPSR(p0, r16, r19)
 	;;
 
 	RFI
diff --git a/arch/ia64/kernel/jprobes.S b/arch/ia64/kernel/jprobes.S
index 621630256c4a..f69389c7be1d 100644
--- a/arch/ia64/kernel/jprobes.S
+++ b/arch/ia64/kernel/jprobes.S
@@ -45,7 +45,7 @@
  * to the correct location.
  */
 #include <asm/asmmacro.h>
-#include <asm-ia64/break.h>
+#include <asm/break.h>
 
 	/*
 	 * void jprobe_break(void)
diff --git a/arch/ia64/kernel/kprobes.c b/arch/ia64/kernel/kprobes.c
index 233434f4f88f..f07688da947c 100644
--- a/arch/ia64/kernel/kprobes.c
+++ b/arch/ia64/kernel/kprobes.c
@@ -429,8 +429,7 @@ int __kprobes trampoline_probe_handler(struct kprobe *p, struct pt_regs *regs)
 		((struct fnptr *)kretprobe_trampoline)->ip;
 
 	INIT_HLIST_HEAD(&empty_rp);
-	spin_lock_irqsave(&kretprobe_lock, flags);
-	head = kretprobe_inst_table_head(current);
+	kretprobe_hash_lock(current, &head, &flags);
 
 	/*
 	 * It is possible to have multiple instances associated with a given
@@ -485,7 +484,7 @@ int __kprobes trampoline_probe_handler(struct kprobe *p, struct pt_regs *regs)
 	kretprobe_assert(ri, orig_ret_address, trampoline_address);
 
 	reset_current_kprobe();
-	spin_unlock_irqrestore(&kretprobe_lock, flags);
+	kretprobe_hash_unlock(current, &flags);
 	preempt_enable_no_resched();
 
 	hlist_for_each_entry_safe(ri, node, tmp, &empty_rp, hlist) {
@@ -500,7 +499,6 @@ int __kprobes trampoline_probe_handler(struct kprobe *p, struct pt_regs *regs)
 	return 1;
 }
 
-/* Called with kretprobe_lock held */
 void __kprobes arch_prepare_kretprobe(struct kretprobe_instance *ri,
 				      struct pt_regs *regs)
 {
diff --git a/arch/ia64/kernel/nr-irqs.c b/arch/ia64/kernel/nr-irqs.c
index 1ae049181e83..8273afc32db8 100644
--- a/arch/ia64/kernel/nr-irqs.c
+++ b/arch/ia64/kernel/nr-irqs.c
@@ -9,7 +9,7 @@
 
 #include <linux/kbuild.h>
 #include <linux/threads.h>
-#include <asm-ia64/native/irq.h>
+#include <asm/native/irq.h>
 
 void foo(void)
 {
diff --git a/arch/ia64/kernel/perfmon.c b/arch/ia64/kernel/perfmon.c
index 19d4493c6193..fc8f3509df27 100644
--- a/arch/ia64/kernel/perfmon.c
+++ b/arch/ia64/kernel/perfmon.c
@@ -2626,7 +2626,7 @@ pfm_task_incompatible(pfm_context_t *ctx, struct task_struct *task)
 	/*
 	 * make sure the task is off any CPU
 	 */
-	wait_task_inactive(task);
+	wait_task_inactive(task, 0);
 
 	/* more to come... */
 
@@ -4774,7 +4774,7 @@ recheck:
 
 		UNPROTECT_CTX(ctx, flags);
 
-		wait_task_inactive(task);
+		wait_task_inactive(task, 0);
 
 		PROTECT_CTX(ctx, flags);
 
diff --git a/arch/ia64/kernel/setup.c b/arch/ia64/kernel/setup.c
index e5c2de9b29a5..c27d5b2c182b 100644
--- a/arch/ia64/kernel/setup.c
+++ b/arch/ia64/kernel/setup.c
@@ -314,7 +314,7 @@ static inline void __init setup_crashkernel(unsigned long total, int *n)
  *
  * Setup the reserved memory areas set aside for the boot parameters,
  * initrd, etc.  There are currently %IA64_MAX_RSVD_REGIONS defined,
- * see include/asm-ia64/meminit.h if you need to define more.
+ * see arch/ia64/include/asm/meminit.h if you need to define more.
  */
 void __init
 reserve_memory (void)
@@ -927,17 +927,19 @@ cpu_init (void)
 	if (smp_processor_id() == 0) {
 		cpu_set(0, per_cpu(cpu_sibling_map, 0));
 		cpu_set(0, cpu_core_map[0]);
+	} else {
+		/*
+		 * Set ar.k3 so that assembly code in MCA handler can compute
+		 * physical addresses of per cpu variables with a simple:
+		 *   phys = ar.k3 + &per_cpu_var
+		 * and the alt-dtlb-miss handler can set per-cpu mapping into
+		 * the TLB when needed. head.S already did this for cpu0.
+		 */
+		ia64_set_kr(IA64_KR_PER_CPU_DATA,
+			    ia64_tpa(cpu_data) - (long) __per_cpu_start);
 	}
 #endif
 
-	/*
-	 * We set ar.k3 so that assembly code in MCA handler can compute
-	 * physical addresses of per cpu variables with a simple:
-	 *   phys = ar.k3 + &per_cpu_var
-	 */
-	ia64_set_kr(IA64_KR_PER_CPU_DATA,
-		    ia64_tpa(cpu_data) - (long) __per_cpu_start);
-
 	get_max_cacheline_size();
 
 	/*
diff --git a/arch/ia64/kernel/smp.c b/arch/ia64/kernel/smp.c
index 3676468612b6..da8f020d82c1 100644
--- a/arch/ia64/kernel/smp.c
+++ b/arch/ia64/kernel/smp.c
@@ -58,7 +58,7 @@ static struct local_tlb_flush_counts {
 	unsigned int count;
 } __attribute__((__aligned__(32))) local_tlb_flush_counts[NR_CPUS];
 
-static DEFINE_PER_CPU(unsigned int, shadow_flush_counts[NR_CPUS]) ____cacheline_aligned;
+static DEFINE_PER_CPU(unsigned short, shadow_flush_counts[NR_CPUS]) ____cacheline_aligned;
 
 #define IPI_CALL_FUNC		0
 #define IPI_CPU_STOP		1
@@ -254,7 +254,7 @@ smp_local_flush_tlb(void)
 void
 smp_flush_tlb_cpumask(cpumask_t xcpumask)
 {
-	unsigned int *counts = __ia64_per_cpu_var(shadow_flush_counts);
+	unsigned short *counts = __ia64_per_cpu_var(shadow_flush_counts);
 	cpumask_t cpumask = xcpumask;
 	int mycpu, cpu, flush_mycpu = 0;
 
@@ -262,7 +262,7 @@ smp_flush_tlb_cpumask(cpumask_t xcpumask)
 	mycpu = smp_processor_id();
 
 	for_each_cpu_mask(cpu, cpumask)
-		counts[cpu] = local_tlb_flush_counts[cpu].count;
+		counts[cpu] = local_tlb_flush_counts[cpu].count & 0xffff;
 
 	mb();
 	for_each_cpu_mask(cpu, cpumask) {
@@ -276,7 +276,7 @@ smp_flush_tlb_cpumask(cpumask_t xcpumask)
 		smp_local_flush_tlb();
 
 	for_each_cpu_mask(cpu, cpumask)
-		while(counts[cpu] == local_tlb_flush_counts[cpu].count)
+		while(counts[cpu] == (local_tlb_flush_counts[cpu].count & 0xffff))
 			udelay(FLUSH_DELAY);
 
 	preempt_enable();
diff --git a/arch/ia64/kernel/smpboot.c b/arch/ia64/kernel/smpboot.c
index 03f1a9908afc..bcea81e432fd 100644
--- a/arch/ia64/kernel/smpboot.c
+++ b/arch/ia64/kernel/smpboot.c
@@ -138,6 +138,7 @@ cpumask_t cpu_possible_map = CPU_MASK_NONE;
 EXPORT_SYMBOL(cpu_possible_map);
 
 cpumask_t cpu_core_map[NR_CPUS] __cacheline_aligned;
+EXPORT_SYMBOL(cpu_core_map);
 DEFINE_PER_CPU_SHARED_ALIGNED(cpumask_t, cpu_sibling_map);
 EXPORT_PER_CPU_SYMBOL(cpu_sibling_map);
 
@@ -467,7 +468,9 @@ start_secondary (void *unused)
 {
 	/* Early console may use I/O ports */
 	ia64_set_kr(IA64_KR_IO_BASE, __pa(ia64_iobase));
+#ifndef CONFIG_PRINTK_TIME
 	Dprintk("start_secondary: starting CPU 0x%x\n", hard_smp_processor_id());
+#endif
 	efi_map_pal_code();
 	cpu_init();
 	preempt_disable();
diff --git a/arch/ia64/kernel/vmlinux.lds.S b/arch/ia64/kernel/vmlinux.lds.S
index 5a77206c2492..de71da811cd6 100644
--- a/arch/ia64/kernel/vmlinux.lds.S
+++ b/arch/ia64/kernel/vmlinux.lds.S
@@ -215,6 +215,9 @@ SECTIONS
   /* Per-cpu data: */
   percpu : { } :percpu
   . = ALIGN(PERCPU_PAGE_SIZE);
+#ifdef	CONFIG_SMP
+  . = . + PERCPU_PAGE_SIZE;	/* cpu0 per-cpu space */
+#endif
   __phys_per_cpu_start = .;
   .data.percpu PERCPU_ADDR : AT(__phys_per_cpu_start - LOAD_OFFSET)
 	{
diff --git a/arch/ia64/kvm/kvm-ia64.c b/arch/ia64/kvm/kvm-ia64.c
index 2672f4d278ac..7a37d06376be 100644
--- a/arch/ia64/kvm/kvm-ia64.c
+++ b/arch/ia64/kvm/kvm-ia64.c
@@ -125,9 +125,9 @@ void kvm_arch_hardware_enable(void *garbage)
 				PAGE_KERNEL));
 	local_irq_save(saved_psr);
 	slot = ia64_itr_entry(0x3, KVM_VMM_BASE, pte, KVM_VMM_SHIFT);
+	local_irq_restore(saved_psr);
 	if (slot < 0)
 		return;
-	local_irq_restore(saved_psr);
 
 	spin_lock(&vp_lock);
 	status = ia64_pal_vp_init_env(kvm_vsa_base ?
@@ -160,9 +160,9 @@ void kvm_arch_hardware_disable(void *garbage)
 
 	local_irq_save(saved_psr);
 	slot = ia64_itr_entry(0x3, KVM_VMM_BASE, pte, KVM_VMM_SHIFT);
+	local_irq_restore(saved_psr);
 	if (slot < 0)
 		return;
-	local_irq_restore(saved_psr);
 
 	status = ia64_pal_vp_exit_env(host_iva);
 	if (status)
@@ -1253,6 +1253,7 @@ static int vti_vcpu_setup(struct kvm_vcpu *vcpu, int id)
 uninit:
 	kvm_vcpu_uninit(vcpu);
 fail:
+	local_irq_restore(psr);
 	return r;
 }
 
diff --git a/arch/ia64/mm/contig.c b/arch/ia64/mm/contig.c
index 798bf9835a51..e566ff43884a 100644
--- a/arch/ia64/mm/contig.c
+++ b/arch/ia64/mm/contig.c
@@ -163,8 +163,14 @@ per_cpu_init (void)
 	 * get_zeroed_page().
 	 */
 	if (first_time) {
+		void *cpu0_data = __phys_per_cpu_start - PERCPU_PAGE_SIZE;
+
 		first_time=0;
-		for (cpu = 0; cpu < NR_CPUS; cpu++) {
+
+		__per_cpu_offset[0] = (char *) cpu0_data - __per_cpu_start;
+		per_cpu(local_per_cpu_offset, 0) = __per_cpu_offset[0];
+
+		for (cpu = 1; cpu < NR_CPUS; cpu++) {
 			memcpy(cpu_data, __phys_per_cpu_start, __per_cpu_end - __per_cpu_start);
 			__per_cpu_offset[cpu] = (char *) cpu_data - __per_cpu_start;
 			cpu_data += PERCPU_PAGE_SIZE;
@@ -177,7 +183,7 @@ per_cpu_init (void)
 static inline void
 alloc_per_cpu_data(void)
 {
-	cpu_data = __alloc_bootmem(PERCPU_PAGE_SIZE * NR_CPUS,
+	cpu_data = __alloc_bootmem(PERCPU_PAGE_SIZE * NR_CPUS-1,
 				   PERCPU_PAGE_SIZE, __pa(MAX_DMA_ADDRESS));
 }
 #else
diff --git a/arch/ia64/mm/discontig.c b/arch/ia64/mm/discontig.c
index d83125e1ed27..78026aabaa7f 100644
--- a/arch/ia64/mm/discontig.c
+++ b/arch/ia64/mm/discontig.c
@@ -143,7 +143,11 @@ static void *per_cpu_node_setup(void *cpu_data, int node)
 	int cpu;
 
 	for_each_possible_early_cpu(cpu) {
-		if (node == node_cpuid[cpu].nid) {
+		if (cpu == 0) {
+			void *cpu0_data = __phys_per_cpu_start - PERCPU_PAGE_SIZE;
+			__per_cpu_offset[cpu] = (char*)cpu0_data -
+				__per_cpu_start;
+		} else if (node == node_cpuid[cpu].nid) {
 			memcpy(__va(cpu_data), __phys_per_cpu_start,
 			       __per_cpu_end - __per_cpu_start);
 			__per_cpu_offset[cpu] = (char*)__va(cpu_data) -
diff --git a/arch/ia64/mm/hugetlbpage.c b/arch/ia64/mm/hugetlbpage.c
index c45fc7f5a979..b0f615759e97 100644
--- a/arch/ia64/mm/hugetlbpage.c
+++ b/arch/ia64/mm/hugetlbpage.c
@@ -13,6 +13,7 @@
 #include <linux/mm.h>
 #include <linux/hugetlb.h>
 #include <linux/pagemap.h>
+#include <linux/module.h>
 #include <linux/slab.h>
 #include <linux/sysctl.h>
 #include <linux/log2.h>
@@ -21,7 +22,8 @@
 #include <asm/tlb.h>
 #include <asm/tlbflush.h>
 
-unsigned int hpage_shift=HPAGE_SHIFT_DEFAULT;
+unsigned int hpage_shift = HPAGE_SHIFT_DEFAULT;
+EXPORT_SYMBOL(hpage_shift);
 
 pte_t *
 huge_pte_alloc(struct mm_struct *mm, unsigned long addr, unsigned long sz)
diff --git a/arch/ia64/pci/pci.c b/arch/ia64/pci/pci.c
index 77b15f80f101..7545037a8625 100644
--- a/arch/ia64/pci/pci.c
+++ b/arch/ia64/pci/pci.c
@@ -324,7 +324,6 @@ pcibios_setup_root_windows(struct pci_bus *bus, struct pci_controller *ctrl)
 struct pci_bus * __devinit
 pci_acpi_scan_root(struct acpi_device *device, int domain, int bus)
 {
-	struct pci_root_info info;
 	struct pci_controller *controller;
 	unsigned int windows = 0;
 	struct pci_bus *pbus;
@@ -346,22 +345,24 @@ pci_acpi_scan_root(struct acpi_device *device, int domain, int bus)
 	acpi_walk_resources(device->handle, METHOD_NAME__CRS, count_window,
 			&windows);
 	if (windows) {
+		struct pci_root_info info;
+
 		controller->window =
 			kmalloc_node(sizeof(*controller->window) * windows,
 				     GFP_KERNEL, controller->node);
 		if (!controller->window)
 			goto out2;
-	}
 
-	name = kmalloc(16, GFP_KERNEL);
-	if (!name)
-		goto out3;
+		name = kmalloc(16, GFP_KERNEL);
+		if (!name)
+			goto out3;
 
-	sprintf(name, "PCI Bus %04x:%02x", domain, bus);
-	info.controller = controller;
-	info.name = name;
-	acpi_walk_resources(device->handle, METHOD_NAME__CRS, add_window,
-			&info);
+		sprintf(name, "PCI Bus %04x:%02x", domain, bus);
+		info.controller = controller;
+		info.name = name;
+		acpi_walk_resources(device->handle, METHOD_NAME__CRS,
+			add_window, &info);
+	}
 	/*
 	 * See arch/x86/pci/acpi.c.
 	 * The desired pci bus might already be scanned in a quirk. We
diff --git a/arch/ia64/sn/kernel/iomv.c b/arch/ia64/sn/kernel/iomv.c
index ab7e2fd40798..c77ebdf98119 100644
--- a/arch/ia64/sn/kernel/iomv.c
+++ b/arch/ia64/sn/kernel/iomv.c
@@ -63,7 +63,7 @@ EXPORT_SYMBOL(sn_io_addr);
 /**
  * __sn_mmiowb - I/O space memory barrier
  *
- * See include/asm-ia64/io.h and Documentation/DocBook/deviceiobook.tmpl
+ * See arch/ia64/include/asm/io.h and Documentation/DocBook/deviceiobook.tmpl
  * for details.
  *
  * On SN2, we wait for the PIO_WRITE_STATUS SHub register to clear.
diff --git a/arch/ia64/sn/pci/pci_dma.c b/arch/ia64/sn/pci/pci_dma.c
index 52175af299a0..53ebb6484495 100644
--- a/arch/ia64/sn/pci/pci_dma.c
+++ b/arch/ia64/sn/pci/pci_dma.c
@@ -350,7 +350,7 @@ void sn_dma_sync_sg_for_device(struct device *dev, struct scatterlist *sg,
 }
 EXPORT_SYMBOL(sn_dma_sync_sg_for_device);
 
-int sn_dma_mapping_error(dma_addr_t dma_addr)
+int sn_dma_mapping_error(struct device *dev, dma_addr_t dma_addr)
 {
 	return 0;
 }
diff --git a/arch/m32r/boot/compressed/misc.c b/arch/m32r/boot/compressed/misc.c
index 600d40e33495..d394292498c0 100644
--- a/arch/m32r/boot/compressed/misc.c
+++ b/arch/m32r/boot/compressed/misc.c
@@ -70,8 +70,6 @@ static unsigned outcnt = 0;  /* bytes in output buffer */
 static int  fill_inbuf(void);
 static void flush_window(void);
 static void error(char *m);
-static void gzip_mark(void **);
-static void gzip_release(void **);
 
 static unsigned char *input_data;
 static int input_len;
@@ -82,9 +80,6 @@ static unsigned long output_ptr = 0;
 
 #include "m32r_sio.c"
 
-static void *malloc(int size);
-static void free(void *where);
-
 static unsigned long free_mem_ptr;
 static unsigned long free_mem_end_ptr;
 
@@ -92,38 +87,6 @@ static unsigned long free_mem_end_ptr;
 
 #include "../../../../lib/inflate.c"
 
-static void *malloc(int size)
-{
-	void *p;
-
-	if (size <0) error("Malloc error");
-	if (free_mem_ptr == 0) error("Memory error");
-
-	free_mem_ptr = (free_mem_ptr + 3) & ~3;	/* Align */
-
-	p = (void *)free_mem_ptr;
-	free_mem_ptr += size;
-
-	if (free_mem_ptr >= free_mem_end_ptr)
-		error("Out of memory");
-
-	return p;
-}
-
-static void free(void *where)
-{	/* Don't care */
-}
-
-static void gzip_mark(void **ptr)
-{
-	*ptr = (void *) free_mem_ptr;
-}
-
-static void gzip_release(void **ptr)
-{
-	free_mem_ptr = (long) *ptr;
-}
-
 void* memset(void* s, int c, size_t n)
 {
 	int i;
diff --git a/arch/m32r/mm/init.c b/arch/m32r/mm/init.c
index 2554eb59cfef..24d429f9358a 100644
--- a/arch/m32r/mm/init.c
+++ b/arch/m32r/mm/init.c
@@ -36,42 +36,6 @@ pgd_t swapper_pg_dir[1024];
 
 DEFINE_PER_CPU(struct mmu_gather, mmu_gathers);
 
-void show_mem(void)
-{
-	int total = 0, reserved = 0;
-	int shared = 0, cached = 0;
-	int highmem = 0;
-	struct page *page;
-	pg_data_t *pgdat;
-	unsigned long i;
-
-	printk("Mem-info:\n");
-	show_free_areas();
-	printk("Free swap:       %6ldkB\n",nr_swap_pages<<(PAGE_SHIFT-10));
-	for_each_online_pgdat(pgdat) {
-		unsigned long flags;
-		pgdat_resize_lock(pgdat, &flags);
-		for (i = 0; i < pgdat->node_spanned_pages; ++i) {
-			page = pgdat_page_nr(pgdat, i);
-			total++;
-			if (PageHighMem(page))
-				highmem++;
-			if (PageReserved(page))
-				reserved++;
-			else if (PageSwapCache(page))
-				cached++;
-			else if (page_count(page))
-				shared += page_count(page) - 1;
-		}
-		pgdat_resize_unlock(pgdat, &flags);
-	}
-	printk("%d pages of RAM\n", total);
-	printk("%d pages of HIGHMEM\n",highmem);
-	printk("%d reserved pages\n",reserved);
-	printk("%d pages shared\n",shared);
-	printk("%d pages swap cached\n",cached);
-}
-
 /*
  * Cache of MMU context last used.
  */
diff --git a/arch/m68k/atari/atakeyb.c b/arch/m68k/atari/atakeyb.c
index 8a2a53b33616..bb959fbab2dc 100644
--- a/arch/m68k/atari/atakeyb.c
+++ b/arch/m68k/atari/atakeyb.c
@@ -580,13 +580,15 @@ int atari_keyb_init(void)
 	do {
 		/* reset IKBD ACIA */
 		acia.key_ctrl = ACIA_RESET |
-				(atari_switches & ATARI_SWITCH_IKBD) ? ACIA_RHTID : 0;
+				((atari_switches & ATARI_SWITCH_IKBD) ?
+				 ACIA_RHTID : 0);
 		(void)acia.key_ctrl;
 		(void)acia.key_data;
 
 		/* reset MIDI ACIA */
 		acia.mid_ctrl = ACIA_RESET |
-				(atari_switches & ATARI_SWITCH_MIDI) ? ACIA_RHTID : 0;
+				((atari_switches & ATARI_SWITCH_MIDI) ?
+				 ACIA_RHTID : 0);
 		(void)acia.mid_ctrl;
 		(void)acia.mid_data;
 
@@ -599,7 +601,8 @@ int atari_keyb_init(void)
 				 ACIA_RHTID : ACIA_RLTID);
 
 		acia.mid_ctrl = ACIA_DIV16 | ACIA_D8N1S |
-				(atari_switches & ATARI_SWITCH_MIDI) ? ACIA_RHTID : 0;
+				((atari_switches & ATARI_SWITCH_MIDI) ?
+				 ACIA_RHTID : 0);
 
 	/* make sure the interrupt line is up */
 	} while ((mfp.par_dt_reg & 0x10) == 0);
diff --git a/arch/m68k/kernel/entry.S b/arch/m68k/kernel/entry.S
index 18a9c5f4b00d..f28404d9a2bc 100644
--- a/arch/m68k/kernel/entry.S
+++ b/arch/m68k/kernel/entry.S
@@ -747,4 +747,10 @@ sys_call_table:
 	.long sys_fallocate		/* 320 */
 	.long sys_timerfd_settime
 	.long sys_timerfd_gettime
+	.long sys_signalfd4
+	.long sys_eventfd2
+	.long sys_epoll_create1		/* 325 */
+	.long sys_dup3
+	.long sys_pipe2
+	.long sys_inotify_init1
 
diff --git a/arch/m68k/mac/baboon.c b/arch/m68k/mac/baboon.c
index dae9c982aa89..c7b25b0aacff 100644
--- a/arch/m68k/mac/baboon.c
+++ b/arch/m68k/mac/baboon.c
@@ -11,7 +11,6 @@
 #include <linux/mm.h>
 #include <linux/delay.h>
 #include <linux/init.h>
-#include <linux/ide.h>
 
 #include <asm/traps.h>
 #include <asm/bootinfo.h>
diff --git a/arch/m68k/mac/via.c b/arch/m68k/mac/via.c
index f3b27d04a31f..1bdb03c73c0f 100644
--- a/arch/m68k/mac/via.c
+++ b/arch/m68k/mac/via.c
@@ -27,7 +27,6 @@
 #include <linux/mm.h>
 #include <linux/delay.h>
 #include <linux/init.h>
-#include <linux/ide.h>
 #include <linux/module.h>
 
 #include <asm/bootinfo.h>
diff --git a/arch/m68k/mm/init.c b/arch/m68k/mm/init.c
index 79f5f94d4800..81bb08ceec18 100644
--- a/arch/m68k/mm/init.c
+++ b/arch/m68k/mm/init.c
@@ -69,36 +69,6 @@ void __init m68k_setup_node(int node)
 void *empty_zero_page;
 EXPORT_SYMBOL(empty_zero_page);
 
-void show_mem(void)
-{
-	pg_data_t *pgdat;
-	int free = 0, total = 0, reserved = 0, shared = 0;
-	int cached = 0;
-	int i;
-
-	printk("\nMem-info:\n");
-	show_free_areas();
-	for_each_online_pgdat(pgdat) {
-		for (i = 0; i < pgdat->node_spanned_pages; i++) {
-			struct page *page = pgdat->node_mem_map + i;
-			total++;
-			if (PageReserved(page))
-				reserved++;
-			else if (PageSwapCache(page))
-				cached++;
-			else if (!page_count(page))
-				free++;
-			else
-				shared += page_count(page) - 1;
-		}
-	}
-	printk("%d pages of RAM\n",total);
-	printk("%d free pages\n",free);
-	printk("%d reserved pages\n",reserved);
-	printk("%d pages shared\n",shared);
-	printk("%d pages swap cached\n",cached);
-}
-
 extern void init_pointer_table(unsigned long ptable);
 
 /* References to section boundaries */
diff --git a/include/asm-m68knommu/Kbuild b/arch/m68knommu/include/asm/Kbuild
index c68e1680da01..c68e1680da01 100644
--- a/include/asm-m68knommu/Kbuild
+++ b/arch/m68knommu/include/asm/Kbuild
diff --git a/include/asm-m68knommu/MC68328.h b/arch/m68knommu/include/asm/MC68328.h
index a337e56d09bf..a337e56d09bf 100644
--- a/include/asm-m68knommu/MC68328.h
+++ b/arch/m68knommu/include/asm/MC68328.h
diff --git a/include/asm-m68knommu/MC68332.h b/arch/m68knommu/include/asm/MC68332.h
index 6bb8f02685a2..6bb8f02685a2 100644
--- a/include/asm-m68knommu/MC68332.h
+++ b/arch/m68knommu/include/asm/MC68332.h
diff --git a/include/asm-m68knommu/MC68EZ328.h b/arch/m68knommu/include/asm/MC68EZ328.h
index 69b7f9139e5e..69b7f9139e5e 100644
--- a/include/asm-m68knommu/MC68EZ328.h
+++ b/arch/m68knommu/include/asm/MC68EZ328.h
diff --git a/include/asm-m68knommu/MC68VZ328.h b/arch/m68knommu/include/asm/MC68VZ328.h
index 2b9bf626a0a5..2b9bf626a0a5 100644
--- a/include/asm-m68knommu/MC68VZ328.h
+++ b/arch/m68knommu/include/asm/MC68VZ328.h
diff --git a/include/asm-m68knommu/a.out.h b/arch/m68knommu/include/asm/a.out.h
index ce18ef99de04..ce18ef99de04 100644
--- a/include/asm-m68knommu/a.out.h
+++ b/arch/m68knommu/include/asm/a.out.h
diff --git a/include/asm-m68knommu/anchor.h b/arch/m68knommu/include/asm/anchor.h
index 871c0d5cfc3d..871c0d5cfc3d 100644
--- a/include/asm-m68knommu/anchor.h
+++ b/arch/m68knommu/include/asm/anchor.h
diff --git a/include/asm-m68knommu/atomic.h b/arch/m68knommu/include/asm/atomic.h
index d5632a305dae..d5632a305dae 100644
--- a/include/asm-m68knommu/atomic.h
+++ b/arch/m68knommu/include/asm/atomic.h
diff --git a/include/asm-m68knommu/auxvec.h b/arch/m68knommu/include/asm/auxvec.h
index 844d6d52204b..844d6d52204b 100644
--- a/include/asm-m68knommu/auxvec.h
+++ b/arch/m68knommu/include/asm/auxvec.h
diff --git a/include/asm-m68knommu/bitops.h b/arch/m68knommu/include/asm/bitops.h
index 6f3685eab44c..6f3685eab44c 100644
--- a/include/asm-m68knommu/bitops.h
+++ b/arch/m68knommu/include/asm/bitops.h
diff --git a/include/asm-m68knommu/bootinfo.h b/arch/m68knommu/include/asm/bootinfo.h
index c12e526f5189..c12e526f5189 100644
--- a/include/asm-m68knommu/bootinfo.h
+++ b/arch/m68knommu/include/asm/bootinfo.h
diff --git a/include/asm-m68knommu/bootstd.h b/arch/m68knommu/include/asm/bootstd.h
index bdc1a4ac4fe9..bdc1a4ac4fe9 100644
--- a/include/asm-m68knommu/bootstd.h
+++ b/arch/m68knommu/include/asm/bootstd.h
diff --git a/include/asm-m68knommu/bug.h b/arch/m68knommu/include/asm/bug.h
index 70e7dc0af21a..70e7dc0af21a 100644
--- a/include/asm-m68knommu/bug.h
+++ b/arch/m68knommu/include/asm/bug.h
diff --git a/include/asm-m68knommu/bugs.h b/arch/m68knommu/include/asm/bugs.h
index 5f382dac3a60..5f382dac3a60 100644
--- a/include/asm-m68knommu/bugs.h
+++ b/arch/m68knommu/include/asm/bugs.h
diff --git a/include/asm-m68knommu/byteorder.h b/arch/m68knommu/include/asm/byteorder.h
index 20bb4426b610..20bb4426b610 100644
--- a/include/asm-m68knommu/byteorder.h
+++ b/arch/m68knommu/include/asm/byteorder.h
diff --git a/include/asm-m68knommu/cache.h b/arch/m68knommu/include/asm/cache.h
index 24e9eace5f8c..24e9eace5f8c 100644
--- a/include/asm-m68knommu/cache.h
+++ b/arch/m68knommu/include/asm/cache.h
diff --git a/include/asm-m68knommu/cachectl.h b/arch/m68knommu/include/asm/cachectl.h
index bcf5a6a9dd52..bcf5a6a9dd52 100644
--- a/include/asm-m68knommu/cachectl.h
+++ b/arch/m68knommu/include/asm/cachectl.h
diff --git a/include/asm-m68knommu/cacheflush.h b/arch/m68knommu/include/asm/cacheflush.h
index 87e5dc0413b4..87e5dc0413b4 100644
--- a/include/asm-m68knommu/cacheflush.h
+++ b/arch/m68knommu/include/asm/cacheflush.h
diff --git a/include/asm-m68knommu/checksum.h b/arch/m68knommu/include/asm/checksum.h
index 81883482ffb1..81883482ffb1 100644
--- a/include/asm-m68knommu/checksum.h
+++ b/arch/m68knommu/include/asm/checksum.h
diff --git a/include/asm-m68knommu/coldfire.h b/arch/m68knommu/include/asm/coldfire.h
index 83a9fa4e618a..83a9fa4e618a 100644
--- a/include/asm-m68knommu/coldfire.h
+++ b/arch/m68knommu/include/asm/coldfire.h
diff --git a/include/asm-m68knommu/commproc.h b/arch/m68knommu/include/asm/commproc.h
index edf5eb6c08d2..edf5eb6c08d2 100644
--- a/include/asm-m68knommu/commproc.h
+++ b/arch/m68knommu/include/asm/commproc.h
diff --git a/include/asm-m68knommu/cputime.h b/arch/m68knommu/include/asm/cputime.h
index a0c4a660878d..a0c4a660878d 100644
--- a/include/asm-m68knommu/cputime.h
+++ b/arch/m68knommu/include/asm/cputime.h
diff --git a/include/asm-m68knommu/current.h b/arch/m68knommu/include/asm/current.h
index 53ee0f9f7cef..53ee0f9f7cef 100644
--- a/include/asm-m68knommu/current.h
+++ b/arch/m68knommu/include/asm/current.h
diff --git a/include/asm-m68knommu/dbg.h b/arch/m68knommu/include/asm/dbg.h
index 27af3270f671..27af3270f671 100644
--- a/include/asm-m68knommu/dbg.h
+++ b/arch/m68knommu/include/asm/dbg.h
diff --git a/include/asm-m68knommu/delay.h b/arch/m68knommu/include/asm/delay.h
index 55cbd6294ab6..55cbd6294ab6 100644
--- a/include/asm-m68knommu/delay.h
+++ b/arch/m68knommu/include/asm/delay.h
diff --git a/include/asm-m68knommu/device.h b/arch/m68knommu/include/asm/device.h
index d8f9872b0e2d..d8f9872b0e2d 100644
--- a/include/asm-m68knommu/device.h
+++ b/arch/m68knommu/include/asm/device.h
diff --git a/include/asm-m68knommu/div64.h b/arch/m68knommu/include/asm/div64.h
index 6cd978cefb28..6cd978cefb28 100644
--- a/include/asm-m68knommu/div64.h
+++ b/arch/m68knommu/include/asm/div64.h
diff --git a/include/asm-m68knommu/dma-mapping.h b/arch/m68knommu/include/asm/dma-mapping.h
index 6aeab18e58bd..6aeab18e58bd 100644
--- a/include/asm-m68knommu/dma-mapping.h
+++ b/arch/m68knommu/include/asm/dma-mapping.h
diff --git a/include/asm-m68knommu/dma.h b/arch/m68knommu/include/asm/dma.h
index 939a02056217..939a02056217 100644
--- a/include/asm-m68knommu/dma.h
+++ b/arch/m68knommu/include/asm/dma.h
diff --git a/include/asm-m68knommu/elf.h b/arch/m68knommu/include/asm/elf.h
index 27f0ec70fba8..27f0ec70fba8 100644
--- a/include/asm-m68knommu/elf.h
+++ b/arch/m68knommu/include/asm/elf.h
diff --git a/include/asm-m68knommu/elia.h b/arch/m68knommu/include/asm/elia.h
index e037d4e2de33..e037d4e2de33 100644
--- a/include/asm-m68knommu/elia.h
+++ b/arch/m68knommu/include/asm/elia.h
diff --git a/include/asm-m68knommu/emergency-restart.h b/arch/m68knommu/include/asm/emergency-restart.h
index 108d8c48e42e..108d8c48e42e 100644
--- a/include/asm-m68knommu/emergency-restart.h
+++ b/arch/m68knommu/include/asm/emergency-restart.h
diff --git a/include/asm-m68knommu/entry.h b/arch/m68knommu/include/asm/entry.h
index c2553d26273d..c2553d26273d 100644
--- a/include/asm-m68knommu/entry.h
+++ b/arch/m68knommu/include/asm/entry.h
diff --git a/include/asm-m68knommu/errno.h b/arch/m68knommu/include/asm/errno.h
index 7e8c22b9a5e6..7e8c22b9a5e6 100644
--- a/include/asm-m68knommu/errno.h
+++ b/arch/m68knommu/include/asm/errno.h
diff --git a/include/asm-m68knommu/fb.h b/arch/m68knommu/include/asm/fb.h
index c7df38030992..c7df38030992 100644
--- a/include/asm-m68knommu/fb.h
+++ b/arch/m68knommu/include/asm/fb.h
diff --git a/include/asm-m68knommu/fcntl.h b/arch/m68knommu/include/asm/fcntl.h
index f6a552cda4cd..f6a552cda4cd 100644
--- a/include/asm-m68knommu/fcntl.h
+++ b/arch/m68knommu/include/asm/fcntl.h
diff --git a/include/asm-m68knommu/flat.h b/arch/m68knommu/include/asm/flat.h
index 814b5174a8e0..814b5174a8e0 100644
--- a/include/asm-m68knommu/flat.h
+++ b/arch/m68knommu/include/asm/flat.h
diff --git a/include/asm-m68knommu/fpu.h b/arch/m68knommu/include/asm/fpu.h
index b16b2e4fca2a..b16b2e4fca2a 100644
--- a/include/asm-m68knommu/fpu.h
+++ b/arch/m68knommu/include/asm/fpu.h
diff --git a/include/asm-m68knommu/futex.h b/arch/m68knommu/include/asm/futex.h
index 6a332a9f099c..6a332a9f099c 100644
--- a/include/asm-m68knommu/futex.h
+++ b/arch/m68knommu/include/asm/futex.h
diff --git a/include/asm-m68knommu/hardirq.h b/arch/m68knommu/include/asm/hardirq.h
index bfad28149a49..bfad28149a49 100644
--- a/include/asm-m68knommu/hardirq.h
+++ b/arch/m68knommu/include/asm/hardirq.h
diff --git a/include/asm-m68knommu/hw_irq.h b/arch/m68knommu/include/asm/hw_irq.h
index f3ec9e5ae049..f3ec9e5ae049 100644
--- a/include/asm-m68knommu/hw_irq.h
+++ b/arch/m68knommu/include/asm/hw_irq.h
diff --git a/include/asm-m68knommu/hwtest.h b/arch/m68knommu/include/asm/hwtest.h
index 700626a1b1bf..700626a1b1bf 100644
--- a/include/asm-m68knommu/hwtest.h
+++ b/arch/m68knommu/include/asm/hwtest.h
diff --git a/include/asm-m68knommu/io.h b/arch/m68knommu/include/asm/io.h
index 6adef1ee2082..6adef1ee2082 100644
--- a/include/asm-m68knommu/io.h
+++ b/arch/m68knommu/include/asm/io.h
diff --git a/include/asm-m68knommu/ioctl.h b/arch/m68knommu/include/asm/ioctl.h
index b279fe06dfe5..b279fe06dfe5 100644
--- a/include/asm-m68knommu/ioctl.h
+++ b/arch/m68knommu/include/asm/ioctl.h
diff --git a/include/asm-m68knommu/ioctls.h b/arch/m68knommu/include/asm/ioctls.h
index 0b1eb4d85059..0b1eb4d85059 100644
--- a/include/asm-m68knommu/ioctls.h
+++ b/arch/m68knommu/include/asm/ioctls.h
diff --git a/include/asm-m68knommu/ipcbuf.h b/arch/m68knommu/include/asm/ipcbuf.h
index e4a7be6dd706..e4a7be6dd706 100644
--- a/include/asm-m68knommu/ipcbuf.h
+++ b/arch/m68knommu/include/asm/ipcbuf.h
diff --git a/include/asm-m68knommu/irq.h b/arch/m68knommu/include/asm/irq.h
index 9373c31ac87d..9373c31ac87d 100644
--- a/include/asm-m68knommu/irq.h
+++ b/arch/m68knommu/include/asm/irq.h
diff --git a/include/asm-m68knommu/irq_regs.h b/arch/m68knommu/include/asm/irq_regs.h
index 3dd9c0b70270..3dd9c0b70270 100644
--- a/include/asm-m68knommu/irq_regs.h
+++ b/arch/m68knommu/include/asm/irq_regs.h
diff --git a/include/asm-m68knommu/kdebug.h b/arch/m68knommu/include/asm/kdebug.h
index 6ece1b037665..6ece1b037665 100644
--- a/include/asm-m68knommu/kdebug.h
+++ b/arch/m68knommu/include/asm/kdebug.h
diff --git a/include/asm-m68knommu/kmap_types.h b/arch/m68knommu/include/asm/kmap_types.h
index bfb6707575d1..bfb6707575d1 100644
--- a/include/asm-m68knommu/kmap_types.h
+++ b/arch/m68knommu/include/asm/kmap_types.h
diff --git a/include/asm-m68knommu/linkage.h b/arch/m68knommu/include/asm/linkage.h
index c288a19ff489..c288a19ff489 100644
--- a/include/asm-m68knommu/linkage.h
+++ b/arch/m68knommu/include/asm/linkage.h
diff --git a/include/asm-m68knommu/local.h b/arch/m68knommu/include/asm/local.h
index 84a39c1b86f8..84a39c1b86f8 100644
--- a/include/asm-m68knommu/local.h
+++ b/arch/m68knommu/include/asm/local.h
diff --git a/include/asm-m68knommu/m5206sim.h b/arch/m68knommu/include/asm/m5206sim.h
index 7e3594dea88b..7e3594dea88b 100644
--- a/include/asm-m68knommu/m5206sim.h
+++ b/arch/m68knommu/include/asm/m5206sim.h
diff --git a/include/asm-m68knommu/m520xsim.h b/arch/m68knommu/include/asm/m520xsim.h
index 49d016e6391a..49d016e6391a 100644
--- a/include/asm-m68knommu/m520xsim.h
+++ b/arch/m68knommu/include/asm/m520xsim.h
diff --git a/include/asm-m68knommu/m523xsim.h b/arch/m68knommu/include/asm/m523xsim.h
index bf397313e93f..bf397313e93f 100644
--- a/include/asm-m68knommu/m523xsim.h
+++ b/arch/m68knommu/include/asm/m523xsim.h
diff --git a/include/asm-m68knommu/m5249sim.h b/arch/m68knommu/include/asm/m5249sim.h
index 366eb8602d2f..366eb8602d2f 100644
--- a/include/asm-m68knommu/m5249sim.h
+++ b/arch/m68knommu/include/asm/m5249sim.h
diff --git a/include/asm-m68knommu/m5272sim.h b/arch/m68knommu/include/asm/m5272sim.h
index 6217edc21139..6217edc21139 100644
--- a/include/asm-m68knommu/m5272sim.h
+++ b/arch/m68knommu/include/asm/m5272sim.h
diff --git a/include/asm-m68knommu/m527xsim.h b/arch/m68knommu/include/asm/m527xsim.h
index 1f63ab3fb3e6..1f63ab3fb3e6 100644
--- a/include/asm-m68knommu/m527xsim.h
+++ b/arch/m68knommu/include/asm/m527xsim.h
diff --git a/include/asm-m68knommu/m528xsim.h b/arch/m68knommu/include/asm/m528xsim.h
index 28bf783a5d6d..28bf783a5d6d 100644
--- a/include/asm-m68knommu/m528xsim.h
+++ b/arch/m68knommu/include/asm/m528xsim.h
diff --git a/include/asm-m68knommu/m5307sim.h b/arch/m68knommu/include/asm/m5307sim.h
index 5886728409c0..5886728409c0 100644
--- a/include/asm-m68knommu/m5307sim.h
+++ b/arch/m68knommu/include/asm/m5307sim.h
diff --git a/include/asm-m68knommu/m532xsim.h b/arch/m68knommu/include/asm/m532xsim.h
index 1835fd20a82c..1835fd20a82c 100644
--- a/include/asm-m68knommu/m532xsim.h
+++ b/arch/m68knommu/include/asm/m532xsim.h
diff --git a/include/asm-m68knommu/m5407sim.h b/arch/m68knommu/include/asm/m5407sim.h
index cc22c4a53005..cc22c4a53005 100644
--- a/include/asm-m68knommu/m5407sim.h
+++ b/arch/m68knommu/include/asm/m5407sim.h
diff --git a/include/asm-m68knommu/m68360.h b/arch/m68knommu/include/asm/m68360.h
index eb7d39ef2855..eb7d39ef2855 100644
--- a/include/asm-m68knommu/m68360.h
+++ b/arch/m68knommu/include/asm/m68360.h
diff --git a/include/asm-m68knommu/m68360_enet.h b/arch/m68knommu/include/asm/m68360_enet.h
index c36f4d059203..c36f4d059203 100644
--- a/include/asm-m68knommu/m68360_enet.h
+++ b/arch/m68knommu/include/asm/m68360_enet.h
diff --git a/include/asm-m68knommu/m68360_pram.h b/arch/m68knommu/include/asm/m68360_pram.h
index e6088bbce93d..e6088bbce93d 100644
--- a/include/asm-m68knommu/m68360_pram.h
+++ b/arch/m68knommu/include/asm/m68360_pram.h
diff --git a/include/asm-m68knommu/m68360_quicc.h b/arch/m68knommu/include/asm/m68360_quicc.h
index 6d40f4d18e10..6d40f4d18e10 100644
--- a/include/asm-m68knommu/m68360_quicc.h
+++ b/arch/m68knommu/include/asm/m68360_quicc.h
diff --git a/include/asm-m68knommu/m68360_regs.h b/arch/m68knommu/include/asm/m68360_regs.h
index d57217ca4f27..d57217ca4f27 100644
--- a/include/asm-m68knommu/m68360_regs.h
+++ b/arch/m68knommu/include/asm/m68360_regs.h
diff --git a/include/asm-m68knommu/machdep.h b/arch/m68knommu/include/asm/machdep.h
index de9f47a51cc2..de9f47a51cc2 100644
--- a/include/asm-m68knommu/machdep.h
+++ b/arch/m68knommu/include/asm/machdep.h
diff --git a/include/asm-m68knommu/math-emu.h b/arch/m68knommu/include/asm/math-emu.h
index 7e7090517b72..7e7090517b72 100644
--- a/include/asm-m68knommu/math-emu.h
+++ b/arch/m68knommu/include/asm/math-emu.h
diff --git a/include/asm-m68knommu/mc146818rtc.h b/arch/m68knommu/include/asm/mc146818rtc.h
index 907a0481a140..907a0481a140 100644
--- a/include/asm-m68knommu/mc146818rtc.h
+++ b/arch/m68knommu/include/asm/mc146818rtc.h
diff --git a/include/asm-m68knommu/mcfcache.h b/arch/m68knommu/include/asm/mcfcache.h
index c042634fadaa..c042634fadaa 100644
--- a/include/asm-m68knommu/mcfcache.h
+++ b/arch/m68knommu/include/asm/mcfcache.h
diff --git a/include/asm-m68knommu/mcfdma.h b/arch/m68knommu/include/asm/mcfdma.h
index 705c52c79cd8..705c52c79cd8 100644
--- a/include/asm-m68knommu/mcfdma.h
+++ b/arch/m68knommu/include/asm/mcfdma.h
diff --git a/include/asm-m68knommu/mcfmbus.h b/arch/m68knommu/include/asm/mcfmbus.h
index 319899c47a2c..319899c47a2c 100644
--- a/include/asm-m68knommu/mcfmbus.h
+++ b/arch/m68knommu/include/asm/mcfmbus.h
diff --git a/include/asm-m68knommu/mcfne.h b/arch/m68knommu/include/asm/mcfne.h
index 431f63aadd0e..431f63aadd0e 100644
--- a/include/asm-m68knommu/mcfne.h
+++ b/arch/m68knommu/include/asm/mcfne.h
diff --git a/include/asm-m68knommu/mcfpci.h b/arch/m68knommu/include/asm/mcfpci.h
index f1507dd06ec6..f1507dd06ec6 100644
--- a/include/asm-m68knommu/mcfpci.h
+++ b/arch/m68knommu/include/asm/mcfpci.h
diff --git a/include/asm-m68knommu/mcfpit.h b/arch/m68knommu/include/asm/mcfpit.h
index f570cf64fd29..f570cf64fd29 100644
--- a/include/asm-m68knommu/mcfpit.h
+++ b/arch/m68knommu/include/asm/mcfpit.h
diff --git a/include/asm-m68knommu/mcfsim.h b/arch/m68knommu/include/asm/mcfsim.h
index da3f2ceff3a4..da3f2ceff3a4 100644
--- a/include/asm-m68knommu/mcfsim.h
+++ b/arch/m68knommu/include/asm/mcfsim.h
diff --git a/include/asm-m68knommu/mcfsmc.h b/arch/m68knommu/include/asm/mcfsmc.h
index 2d7a4dbd9683..2d7a4dbd9683 100644
--- a/include/asm-m68knommu/mcfsmc.h
+++ b/arch/m68knommu/include/asm/mcfsmc.h
diff --git a/include/asm-m68knommu/mcftimer.h b/arch/m68knommu/include/asm/mcftimer.h
index 0f90f6d2227a..0f90f6d2227a 100644
--- a/include/asm-m68knommu/mcftimer.h
+++ b/arch/m68knommu/include/asm/mcftimer.h
diff --git a/include/asm-m68knommu/mcfuart.h b/arch/m68knommu/include/asm/mcfuart.h
index ef2293873612..ef2293873612 100644
--- a/include/asm-m68knommu/mcfuart.h
+++ b/arch/m68knommu/include/asm/mcfuart.h
diff --git a/include/asm-m68knommu/mcfwdebug.h b/arch/m68knommu/include/asm/mcfwdebug.h
index 27f70e45d700..27f70e45d700 100644
--- a/include/asm-m68knommu/mcfwdebug.h
+++ b/arch/m68knommu/include/asm/mcfwdebug.h
diff --git a/include/asm-m68knommu/md.h b/arch/m68knommu/include/asm/md.h
index d810c78de5ff..d810c78de5ff 100644
--- a/include/asm-m68knommu/md.h
+++ b/arch/m68knommu/include/asm/md.h
diff --git a/include/asm-m68knommu/mman.h b/arch/m68knommu/include/asm/mman.h
index 4846c682efed..4846c682efed 100644
--- a/include/asm-m68knommu/mman.h
+++ b/arch/m68knommu/include/asm/mman.h
diff --git a/include/asm-m68knommu/mmu.h b/arch/m68knommu/include/asm/mmu.h
index 5fa6b68353ba..5fa6b68353ba 100644
--- a/include/asm-m68knommu/mmu.h
+++ b/arch/m68knommu/include/asm/mmu.h
diff --git a/include/asm-m68knommu/mmu_context.h b/arch/m68knommu/include/asm/mmu_context.h
index 9ccee4278c97..9ccee4278c97 100644
--- a/include/asm-m68knommu/mmu_context.h
+++ b/arch/m68knommu/include/asm/mmu_context.h
diff --git a/include/asm-m68knommu/module.h b/arch/m68knommu/include/asm/module.h
index 2e45ab50b232..2e45ab50b232 100644
--- a/include/asm-m68knommu/module.h
+++ b/arch/m68knommu/include/asm/module.h
diff --git a/include/asm-m68knommu/movs.h b/arch/m68knommu/include/asm/movs.h
index 81a16779e833..81a16779e833 100644
--- a/include/asm-m68knommu/movs.h
+++ b/arch/m68knommu/include/asm/movs.h
diff --git a/include/asm-m68knommu/msgbuf.h b/arch/m68knommu/include/asm/msgbuf.h
index bdfadec4d52d..bdfadec4d52d 100644
--- a/include/asm-m68knommu/msgbuf.h
+++ b/arch/m68knommu/include/asm/msgbuf.h
diff --git a/include/asm-m68knommu/mutex.h b/arch/m68knommu/include/asm/mutex.h
index 458c1f7fbc18..458c1f7fbc18 100644
--- a/include/asm-m68knommu/mutex.h
+++ b/arch/m68knommu/include/asm/mutex.h
diff --git a/include/asm-m68knommu/nettel.h b/arch/m68knommu/include/asm/nettel.h
index 0299f6a2deeb..0299f6a2deeb 100644
--- a/include/asm-m68knommu/nettel.h
+++ b/arch/m68knommu/include/asm/nettel.h
diff --git a/include/asm-m68knommu/openprom.h b/arch/m68knommu/include/asm/openprom.h
index fdba7953ff9f..fdba7953ff9f 100644
--- a/include/asm-m68knommu/openprom.h
+++ b/arch/m68knommu/include/asm/openprom.h
diff --git a/include/asm-m68knommu/oplib.h b/arch/m68knommu/include/asm/oplib.h
index ce079dc332d9..ce079dc332d9 100644
--- a/include/asm-m68knommu/oplib.h
+++ b/arch/m68knommu/include/asm/oplib.h
diff --git a/include/asm-m68knommu/page.h b/arch/m68knommu/include/asm/page.h
index 3a1ede4544cb..3a1ede4544cb 100644
--- a/include/asm-m68knommu/page.h
+++ b/arch/m68knommu/include/asm/page.h
diff --git a/include/asm-m68knommu/page_offset.h b/arch/m68knommu/include/asm/page_offset.h
index d4e73e0ba646..d4e73e0ba646 100644
--- a/include/asm-m68knommu/page_offset.h
+++ b/arch/m68knommu/include/asm/page_offset.h
diff --git a/include/asm-m68knommu/param.h b/arch/m68knommu/include/asm/param.h
index 6044397adb64..6044397adb64 100644
--- a/include/asm-m68knommu/param.h
+++ b/arch/m68knommu/include/asm/param.h
diff --git a/include/asm-m68knommu/pci.h b/arch/m68knommu/include/asm/pci.h
index a13f3cc87451..a13f3cc87451 100644
--- a/include/asm-m68knommu/pci.h
+++ b/arch/m68knommu/include/asm/pci.h
diff --git a/include/asm-m68knommu/percpu.h b/arch/m68knommu/include/asm/percpu.h
index 5de72c327efd..5de72c327efd 100644
--- a/include/asm-m68knommu/percpu.h
+++ b/arch/m68knommu/include/asm/percpu.h
diff --git a/include/asm-m68knommu/pgalloc.h b/arch/m68knommu/include/asm/pgalloc.h
index d6352f671ec0..d6352f671ec0 100644
--- a/include/asm-m68knommu/pgalloc.h
+++ b/arch/m68knommu/include/asm/pgalloc.h
diff --git a/include/asm-m68knommu/pgtable.h b/arch/m68knommu/include/asm/pgtable.h
index 46251016e821..46251016e821 100644
--- a/include/asm-m68knommu/pgtable.h
+++ b/arch/m68knommu/include/asm/pgtable.h
diff --git a/include/asm-m68knommu/poll.h b/arch/m68knommu/include/asm/poll.h
index ee1b6cb549ca..ee1b6cb549ca 100644
--- a/include/asm-m68knommu/poll.h
+++ b/arch/m68knommu/include/asm/poll.h
diff --git a/include/asm-m68knommu/posix_types.h b/arch/m68knommu/include/asm/posix_types.h
index 6205fb9392a3..6205fb9392a3 100644
--- a/include/asm-m68knommu/posix_types.h
+++ b/arch/m68knommu/include/asm/posix_types.h
diff --git a/include/asm-m68knommu/processor.h b/arch/m68knommu/include/asm/processor.h
index 91cba18acdd3..91cba18acdd3 100644
--- a/include/asm-m68knommu/processor.h
+++ b/arch/m68knommu/include/asm/processor.h
diff --git a/arch/m68knommu/include/asm/ptrace.h b/arch/m68knommu/include/asm/ptrace.h
new file mode 100644
index 000000000000..8c9194b98548
--- /dev/null
+++ b/arch/m68knommu/include/asm/ptrace.h
@@ -0,0 +1,87 @@
+#ifndef _M68K_PTRACE_H
+#define _M68K_PTRACE_H
+
+#define PT_D1	   0
+#define PT_D2	   1
+#define PT_D3	   2
+#define PT_D4	   3
+#define PT_D5	   4
+#define PT_D6	   5
+#define PT_D7	   6
+#define PT_A0	   7
+#define PT_A1	   8
+#define PT_A2	   9
+#define PT_A3	   10
+#define PT_A4	   11
+#define PT_A5	   12
+#define PT_A6	   13
+#define PT_D0	   14
+#define PT_USP	   15
+#define PT_ORIG_D0 16
+#define PT_SR	   17
+#define PT_PC	   18
+
+#ifndef __ASSEMBLY__
+
+/* this struct defines the way the registers are stored on the
+   stack during a system call. */
+
+struct pt_regs {
+  long     d1;
+  long     d2;
+  long     d3;
+  long     d4;
+  long     d5;
+  long     a0;
+  long     a1;
+  long     a2;
+  long     d0;
+  long     orig_d0;
+  long     stkadj;
+#ifdef CONFIG_COLDFIRE
+  unsigned format :  4; /* frame format specifier */
+  unsigned vector : 12; /* vector offset */
+  unsigned short sr;
+  unsigned long  pc;
+#else
+  unsigned short sr;
+  unsigned long  pc;
+  unsigned format :  4; /* frame format specifier */
+  unsigned vector : 12; /* vector offset */
+#endif
+};
+
+/*
+ * This is the extended stack used by signal handlers and the context
+ * switcher: it's pushed after the normal "struct pt_regs".
+ */
+struct switch_stack {
+	unsigned long  d6;
+	unsigned long  d7;
+	unsigned long  a3;
+	unsigned long  a4;
+	unsigned long  a5;
+	unsigned long  a6;
+	unsigned long  retpc;
+};
+
+/* Arbitrarily choose the same ptrace numbers as used by the Sparc code. */
+#define PTRACE_GETREGS            12
+#define PTRACE_SETREGS            13
+#define PTRACE_GETFPREGS          14
+#define PTRACE_SETFPREGS          15
+
+#ifdef __KERNEL__
+
+#ifndef PS_S
+#define PS_S  (0x2000)
+#define PS_M  (0x1000)
+#endif
+
+#define user_mode(regs) (!((regs)->sr & PS_S))
+#define instruction_pointer(regs) ((regs)->pc)
+#define profile_pc(regs) instruction_pointer(regs)
+extern void show_regs(struct pt_regs *);
+#endif /* __KERNEL__ */
+#endif /* __ASSEMBLY__ */
+#endif /* _M68K_PTRACE_H */
diff --git a/include/asm-m68knommu/quicc_simple.h b/arch/m68knommu/include/asm/quicc_simple.h
index c3636932d4bc..c3636932d4bc 100644
--- a/include/asm-m68knommu/quicc_simple.h
+++ b/arch/m68knommu/include/asm/quicc_simple.h
diff --git a/include/asm-m68knommu/resource.h b/arch/m68knommu/include/asm/resource.h
index 7fa63d5ea576..7fa63d5ea576 100644
--- a/include/asm-m68knommu/resource.h
+++ b/arch/m68knommu/include/asm/resource.h
diff --git a/include/asm-m68knommu/rtc.h b/arch/m68knommu/include/asm/rtc.h
index eaf18ec83c8e..eaf18ec83c8e 100644
--- a/include/asm-m68knommu/rtc.h
+++ b/arch/m68knommu/include/asm/rtc.h
diff --git a/include/asm-m68knommu/scatterlist.h b/arch/m68knommu/include/asm/scatterlist.h
index afc4788b0d2c..afc4788b0d2c 100644
--- a/include/asm-m68knommu/scatterlist.h
+++ b/arch/m68knommu/include/asm/scatterlist.h
diff --git a/include/asm-m68knommu/sections.h b/arch/m68knommu/include/asm/sections.h
index dd0ecb98ec08..dd0ecb98ec08 100644
--- a/include/asm-m68knommu/sections.h
+++ b/arch/m68knommu/include/asm/sections.h
diff --git a/include/asm-m68knommu/segment.h b/arch/m68knommu/include/asm/segment.h
index 42318ebec7ec..42318ebec7ec 100644
--- a/include/asm-m68knommu/segment.h
+++ b/arch/m68knommu/include/asm/segment.h
diff --git a/include/asm-m68knommu/sembuf.h b/arch/m68knommu/include/asm/sembuf.h
index 3a634f9ecf50..3a634f9ecf50 100644
--- a/include/asm-m68knommu/sembuf.h
+++ b/arch/m68knommu/include/asm/sembuf.h
diff --git a/include/asm-m68knommu/setup.h b/arch/m68knommu/include/asm/setup.h
index fb86bb2a6078..fb86bb2a6078 100644
--- a/include/asm-m68knommu/setup.h
+++ b/arch/m68knommu/include/asm/setup.h
diff --git a/include/asm-m68knommu/shm.h b/arch/m68knommu/include/asm/shm.h
index cc8e522d9050..cc8e522d9050 100644
--- a/include/asm-m68knommu/shm.h
+++ b/arch/m68knommu/include/asm/shm.h
diff --git a/include/asm-m68knommu/shmbuf.h b/arch/m68knommu/include/asm/shmbuf.h
index bc34cf8eefce..bc34cf8eefce 100644
--- a/include/asm-m68knommu/shmbuf.h
+++ b/arch/m68knommu/include/asm/shmbuf.h
diff --git a/include/asm-m68knommu/shmparam.h b/arch/m68knommu/include/asm/shmparam.h
index d7ee69648ebf..d7ee69648ebf 100644
--- a/include/asm-m68knommu/shmparam.h
+++ b/arch/m68knommu/include/asm/shmparam.h
diff --git a/include/asm-m68knommu/sigcontext.h b/arch/m68knommu/include/asm/sigcontext.h
index 36c293fc133d..36c293fc133d 100644
--- a/include/asm-m68knommu/sigcontext.h
+++ b/arch/m68knommu/include/asm/sigcontext.h
diff --git a/include/asm-m68knommu/siginfo.h b/arch/m68knommu/include/asm/siginfo.h
index b18e5f4064ae..b18e5f4064ae 100644
--- a/include/asm-m68knommu/siginfo.h
+++ b/arch/m68knommu/include/asm/siginfo.h
diff --git a/include/asm-m68knommu/signal.h b/arch/m68knommu/include/asm/signal.h
index 216c08be54a0..216c08be54a0 100644
--- a/include/asm-m68knommu/signal.h
+++ b/arch/m68knommu/include/asm/signal.h
diff --git a/include/asm-m68knommu/smp.h b/arch/m68knommu/include/asm/smp.h
index 9e9bd7e58922..9e9bd7e58922 100644
--- a/include/asm-m68knommu/smp.h
+++ b/arch/m68knommu/include/asm/smp.h
diff --git a/include/asm-m68knommu/socket.h b/arch/m68knommu/include/asm/socket.h
index ac5478bf6371..ac5478bf6371 100644
--- a/include/asm-m68knommu/socket.h
+++ b/arch/m68knommu/include/asm/socket.h
diff --git a/include/asm-m68knommu/sockios.h b/arch/m68knommu/include/asm/sockios.h
index dcc6a8900ce2..dcc6a8900ce2 100644
--- a/include/asm-m68knommu/sockios.h
+++ b/arch/m68knommu/include/asm/sockios.h
diff --git a/include/asm-m68knommu/spinlock.h b/arch/m68knommu/include/asm/spinlock.h
index 6bb1f06c4781..6bb1f06c4781 100644
--- a/include/asm-m68knommu/spinlock.h
+++ b/arch/m68knommu/include/asm/spinlock.h
diff --git a/include/asm-m68knommu/stat.h b/arch/m68knommu/include/asm/stat.h
index 3d4b260e7c03..3d4b260e7c03 100644
--- a/include/asm-m68knommu/stat.h
+++ b/arch/m68knommu/include/asm/stat.h
diff --git a/include/asm-m68knommu/statfs.h b/arch/m68knommu/include/asm/statfs.h
index 2ce99eaf0970..2ce99eaf0970 100644
--- a/include/asm-m68knommu/statfs.h
+++ b/arch/m68knommu/include/asm/statfs.h
diff --git a/include/asm-m68knommu/string.h b/arch/m68knommu/include/asm/string.h
index af09e17000fc..af09e17000fc 100644
--- a/include/asm-m68knommu/string.h
+++ b/arch/m68knommu/include/asm/string.h
diff --git a/include/asm-m68knommu/system.h b/arch/m68knommu/include/asm/system.h
index 40f49de69821..40f49de69821 100644
--- a/include/asm-m68knommu/system.h
+++ b/arch/m68knommu/include/asm/system.h
diff --git a/include/asm-m68knommu/termbits.h b/arch/m68knommu/include/asm/termbits.h
index 05dd6bc27285..05dd6bc27285 100644
--- a/include/asm-m68knommu/termbits.h
+++ b/arch/m68knommu/include/asm/termbits.h
diff --git a/include/asm-m68knommu/termios.h b/arch/m68knommu/include/asm/termios.h
index e7337881a985..e7337881a985 100644
--- a/include/asm-m68knommu/termios.h
+++ b/arch/m68knommu/include/asm/termios.h
diff --git a/arch/m68knommu/include/asm/thread_info.h b/arch/m68knommu/include/asm/thread_info.h
new file mode 100644
index 000000000000..0c9bc095f3f0
--- /dev/null
+++ b/arch/m68knommu/include/asm/thread_info.h
@@ -0,0 +1,98 @@
+/* thread_info.h: m68knommu low-level thread information
+ * adapted from the i386 and PPC versions by Greg Ungerer (gerg@snapgear.com)
+ *
+ * Copyright (C) 2002  David Howells (dhowells@redhat.com)
+ * - Incorporating suggestions made by Linus Torvalds and Dave Miller
+ */
+
+#ifndef _ASM_THREAD_INFO_H
+#define _ASM_THREAD_INFO_H
+
+#include <asm/page.h>
+
+#ifdef __KERNEL__
+
+#ifndef __ASSEMBLY__
+
+/*
+ * Size of kernel stack for each process. This must be a power of 2...
+ */
+#ifdef CONFIG_4KSTACKS
+#define THREAD_SIZE_ORDER (0)
+#else
+#define THREAD_SIZE_ORDER (1)
+#endif
+                                                                                
+/*
+ * for asm files, THREAD_SIZE is now generated by asm-offsets.c
+ */
+#define THREAD_SIZE (PAGE_SIZE<<THREAD_SIZE_ORDER)
+
+/*
+ * low level task data.
+ */
+struct thread_info {
+	struct task_struct *task;		/* main task structure */
+	struct exec_domain *exec_domain;	/* execution domain */
+	unsigned long	   flags;		/* low level flags */
+	int		   cpu;			/* cpu we're on */
+	int		   preempt_count;	/* 0 => preemptable, <0 => BUG */
+	struct restart_block restart_block;
+};
+
+/*
+ * macros/functions for gaining access to the thread information structure
+ */
+#define INIT_THREAD_INFO(tsk)			\
+{						\
+	.task		= &tsk,			\
+	.exec_domain	= &default_exec_domain,	\
+	.flags		= 0,			\
+	.cpu		= 0,			\
+	.restart_block	= {			\
+		.fn = do_no_restart_syscall,	\
+	},					\
+}
+
+#define init_thread_info	(init_thread_union.thread_info)
+#define init_stack		(init_thread_union.stack)
+
+
+/* how to get the thread information struct from C */
+static inline struct thread_info *current_thread_info(void)
+{
+	struct thread_info *ti;
+	__asm__(
+		"move.l	%%sp, %0 \n\t"
+		"and.l	%1, %0"
+		: "=&d"(ti)
+		: "di" (~(THREAD_SIZE-1))
+		);
+	return ti;
+}
+
+#endif /* __ASSEMBLY__ */
+
+#define	PREEMPT_ACTIVE	0x4000000
+
+/*
+ * thread information flag bit numbers
+ */
+#define TIF_SYSCALL_TRACE	0	/* syscall trace active */
+#define TIF_SIGPENDING		1	/* signal pending */
+#define TIF_NEED_RESCHED	2	/* rescheduling necessary */
+#define TIF_POLLING_NRFLAG	3	/* true if poll_idle() is polling
+					   TIF_NEED_RESCHED */
+#define TIF_MEMDIE		4
+
+/* as above, but as bit values */
+#define _TIF_SYSCALL_TRACE	(1<<TIF_SYSCALL_TRACE)
+#define _TIF_SIGPENDING		(1<<TIF_SIGPENDING)
+#define _TIF_NEED_RESCHED	(1<<TIF_NEED_RESCHED)
+#define _TIF_POLLING_NRFLAG	(1<<TIF_POLLING_NRFLAG)
+
+#define _TIF_WORK_MASK		0x0000FFFE	/* work to do on interrupt/exception return */
+
+#endif /* __KERNEL__ */
+
+#endif /* _ASM_THREAD_INFO_H */
diff --git a/include/asm-m68knommu/timex.h b/arch/m68knommu/include/asm/timex.h
index 109050f3fe91..109050f3fe91 100644
--- a/include/asm-m68knommu/timex.h
+++ b/arch/m68knommu/include/asm/timex.h
diff --git a/include/asm-m68knommu/tlb.h b/arch/m68knommu/include/asm/tlb.h
index 77a7c51ca299..77a7c51ca299 100644
--- a/include/asm-m68knommu/tlb.h
+++ b/arch/m68knommu/include/asm/tlb.h
diff --git a/include/asm-m68knommu/tlbflush.h b/arch/m68knommu/include/asm/tlbflush.h
index a470cfb803eb..a470cfb803eb 100644
--- a/include/asm-m68knommu/tlbflush.h
+++ b/arch/m68knommu/include/asm/tlbflush.h
diff --git a/include/asm-m68knommu/topology.h b/arch/m68knommu/include/asm/topology.h
index ca173e9f26ff..ca173e9f26ff 100644
--- a/include/asm-m68knommu/topology.h
+++ b/arch/m68knommu/include/asm/topology.h
diff --git a/include/asm-m68knommu/traps.h b/arch/m68knommu/include/asm/traps.h
index d0671e5f8e29..d0671e5f8e29 100644
--- a/include/asm-m68knommu/traps.h
+++ b/arch/m68knommu/include/asm/traps.h
diff --git a/include/asm-m68knommu/types.h b/arch/m68knommu/include/asm/types.h
index 031238c2d180..031238c2d180 100644
--- a/include/asm-m68knommu/types.h
+++ b/arch/m68knommu/include/asm/types.h
diff --git a/include/asm-m68knommu/uaccess.h b/arch/m68knommu/include/asm/uaccess.h
index 68bbe9b312f1..68bbe9b312f1 100644
--- a/include/asm-m68knommu/uaccess.h
+++ b/arch/m68knommu/include/asm/uaccess.h
diff --git a/include/asm-m68knommu/ucontext.h b/arch/m68knommu/include/asm/ucontext.h
index 713a27f901cd..713a27f901cd 100644
--- a/include/asm-m68knommu/ucontext.h
+++ b/arch/m68knommu/include/asm/ucontext.h
diff --git a/include/asm-m68knommu/unaligned.h b/arch/m68knommu/include/asm/unaligned.h
index eb1ea4cb9a59..eb1ea4cb9a59 100644
--- a/include/asm-m68knommu/unaligned.h
+++ b/arch/m68knommu/include/asm/unaligned.h
diff --git a/arch/m68knommu/include/asm/unistd.h b/arch/m68knommu/include/asm/unistd.h
new file mode 100644
index 000000000000..b034a2f7b444
--- /dev/null
+++ b/arch/m68knommu/include/asm/unistd.h
@@ -0,0 +1,372 @@
+#ifndef _ASM_M68K_UNISTD_H_
+#define _ASM_M68K_UNISTD_H_
+
+/*
+ * This file contains the system call numbers.
+ */
+
+#define __NR_restart_syscall      0
+#define __NR_exit		  1
+#define __NR_fork		  2
+#define __NR_read		  3
+#define __NR_write		  4
+#define __NR_open		  5
+#define __NR_close		  6
+#define __NR_waitpid		  7
+#define __NR_creat		  8
+#define __NR_link		  9
+#define __NR_unlink		 10
+#define __NR_execve		 11
+#define __NR_chdir		 12
+#define __NR_time		 13
+#define __NR_mknod		 14
+#define __NR_chmod		 15
+#define __NR_chown		 16
+#define __NR_break		 17
+#define __NR_oldstat		 18
+#define __NR_lseek		 19
+#define __NR_getpid		 20
+#define __NR_mount		 21
+#define __NR_umount		 22
+#define __NR_setuid		 23
+#define __NR_getuid		 24
+#define __NR_stime		 25
+#define __NR_ptrace		 26
+#define __NR_alarm		 27
+#define __NR_oldfstat		 28
+#define __NR_pause		 29
+#define __NR_utime		 30
+#define __NR_stty		 31
+#define __NR_gtty		 32
+#define __NR_access		 33
+#define __NR_nice		 34
+#define __NR_ftime		 35
+#define __NR_sync		 36
+#define __NR_kill		 37
+#define __NR_rename		 38
+#define __NR_mkdir		 39
+#define __NR_rmdir		 40
+#define __NR_dup		 41
+#define __NR_pipe		 42
+#define __NR_times		 43
+#define __NR_prof		 44
+#define __NR_brk		 45
+#define __NR_setgid		 46
+#define __NR_getgid		 47
+#define __NR_signal		 48
+#define __NR_geteuid		 49
+#define __NR_getegid		 50
+#define __NR_acct		 51
+#define __NR_umount2		 52
+#define __NR_lock		 53
+#define __NR_ioctl		 54
+#define __NR_fcntl		 55
+#define __NR_mpx		 56
+#define __NR_setpgid		 57
+#define __NR_ulimit		 58
+#define __NR_oldolduname	 59
+#define __NR_umask		 60
+#define __NR_chroot		 61
+#define __NR_ustat		 62
+#define __NR_dup2		 63
+#define __NR_getppid		 64
+#define __NR_getpgrp		 65
+#define __NR_setsid		 66
+#define __NR_sigaction		 67
+#define __NR_sgetmask		 68
+#define __NR_ssetmask		 69
+#define __NR_setreuid		 70
+#define __NR_setregid		 71
+#define __NR_sigsuspend		 72
+#define __NR_sigpending		 73
+#define __NR_sethostname	 74
+#define __NR_setrlimit		 75
+#define __NR_getrlimit		 76
+#define __NR_getrusage		 77
+#define __NR_gettimeofday	 78
+#define __NR_settimeofday	 79
+#define __NR_getgroups		 80
+#define __NR_setgroups		 81
+#define __NR_select		 82
+#define __NR_symlink		 83
+#define __NR_oldlstat		 84
+#define __NR_readlink		 85
+#define __NR_uselib		 86
+#define __NR_swapon		 87
+#define __NR_reboot		 88
+#define __NR_readdir		 89
+#define __NR_mmap		 90
+#define __NR_munmap		 91
+#define __NR_truncate		 92
+#define __NR_ftruncate		 93
+#define __NR_fchmod		 94
+#define __NR_fchown		 95
+#define __NR_getpriority	 96
+#define __NR_setpriority	 97
+#define __NR_profil		 98
+#define __NR_statfs		 99
+#define __NR_fstatfs		100
+#define __NR_ioperm		101
+#define __NR_socketcall		102
+#define __NR_syslog		103
+#define __NR_setitimer		104
+#define __NR_getitimer		105
+#define __NR_stat		106
+#define __NR_lstat		107
+#define __NR_fstat		108
+#define __NR_olduname		109
+#define __NR_iopl		/* 110 */ not supported
+#define __NR_vhangup		111
+#define __NR_idle		/* 112 */ Obsolete
+#define __NR_vm86		/* 113 */ not supported
+#define __NR_wait4		114
+#define __NR_swapoff		115
+#define __NR_sysinfo		116
+#define __NR_ipc		117
+#define __NR_fsync		118
+#define __NR_sigreturn		119
+#define __NR_clone		120
+#define __NR_setdomainname	121
+#define __NR_uname		122
+#define __NR_cacheflush		123
+#define __NR_adjtimex		124
+#define __NR_mprotect		125
+#define __NR_sigprocmask	126
+#define __NR_create_module	127
+#define __NR_init_module	128
+#define __NR_delete_module	129
+#define __NR_get_kernel_syms	130
+#define __NR_quotactl		131
+#define __NR_getpgid		132
+#define __NR_fchdir		133
+#define __NR_bdflush		134
+#define __NR_sysfs		135
+#define __NR_personality	136
+#define __NR_afs_syscall	137 /* Syscall for Andrew File System */
+#define __NR_setfsuid		138
+#define __NR_setfsgid		139
+#define __NR__llseek		140
+#define __NR_getdents		141
+#define __NR__newselect		142
+#define __NR_flock		143
+#define __NR_msync		144
+#define __NR_readv		145
+#define __NR_writev		146
+#define __NR_getsid		147
+#define __NR_fdatasync		148
+#define __NR__sysctl		149
+#define __NR_mlock		150
+#define __NR_munlock		151
+#define __NR_mlockall		152
+#define __NR_munlockall		153
+#define __NR_sched_setparam		154
+#define __NR_sched_getparam		155
+#define __NR_sched_setscheduler		156
+#define __NR_sched_getscheduler		157
+#define __NR_sched_yield		158
+#define __NR_sched_get_priority_max	159
+#define __NR_sched_get_priority_min	160
+#define __NR_sched_rr_get_interval	161
+#define __NR_nanosleep		162
+#define __NR_mremap		163
+#define __NR_setresuid		164
+#define __NR_getresuid		165
+#define __NR_getpagesize	166
+#define __NR_query_module	167
+#define __NR_poll		168
+#define __NR_nfsservctl		169
+#define __NR_setresgid		170
+#define __NR_getresgid		171
+#define __NR_prctl		172
+#define __NR_rt_sigreturn	173
+#define __NR_rt_sigaction	174
+#define __NR_rt_sigprocmask	175
+#define __NR_rt_sigpending	176
+#define __NR_rt_sigtimedwait	177
+#define __NR_rt_sigqueueinfo	178
+#define __NR_rt_sigsuspend	179
+#define __NR_pread64		180
+#define __NR_pwrite64		181
+#define __NR_lchown		182
+#define __NR_getcwd		183
+#define __NR_capget		184
+#define __NR_capset		185
+#define __NR_sigaltstack	186
+#define __NR_sendfile		187
+#define __NR_getpmsg		188	/* some people actually want streams */
+#define __NR_putpmsg		189	/* some people actually want streams */
+#define __NR_vfork		190
+#define __NR_ugetrlimit		191
+#define __NR_mmap2		192
+#define __NR_truncate64		193
+#define __NR_ftruncate64	194
+#define __NR_stat64		195
+#define __NR_lstat64		196
+#define __NR_fstat64		197
+#define __NR_chown32		198
+#define __NR_getuid32		199
+#define __NR_getgid32		200
+#define __NR_geteuid32		201
+#define __NR_getegid32		202
+#define __NR_setreuid32		203
+#define __NR_setregid32		204
+#define __NR_getgroups32	205
+#define __NR_setgroups32	206
+#define __NR_fchown32		207
+#define __NR_setresuid32	208
+#define __NR_getresuid32	209
+#define __NR_setresgid32	210
+#define __NR_getresgid32	211
+#define __NR_lchown32		212
+#define __NR_setuid32		213
+#define __NR_setgid32		214
+#define __NR_setfsuid32		215
+#define __NR_setfsgid32		216
+#define __NR_pivot_root		217
+#define __NR_getdents64		220
+#define __NR_gettid		221
+#define __NR_tkill		222
+#define __NR_setxattr		223
+#define __NR_lsetxattr		224
+#define __NR_fsetxattr		225
+#define __NR_getxattr		226
+#define __NR_lgetxattr		227
+#define __NR_fgetxattr		228
+#define __NR_listxattr		229
+#define __NR_llistxattr		230
+#define __NR_flistxattr		231
+#define __NR_removexattr	232
+#define __NR_lremovexattr	233
+#define __NR_fremovexattr	234
+#define __NR_futex		235
+#define __NR_sendfile64		236
+#define __NR_mincore		237
+#define __NR_madvise		238
+#define __NR_fcntl64		239
+#define __NR_readahead		240
+#define __NR_io_setup		241
+#define __NR_io_destroy		242
+#define __NR_io_getevents	243
+#define __NR_io_submit		244
+#define __NR_io_cancel		245
+#define __NR_fadvise64		246
+#define __NR_exit_group		247
+#define __NR_lookup_dcookie	248
+#define __NR_epoll_create	249
+#define __NR_epoll_ctl		250
+#define __NR_epoll_wait		251
+#define __NR_remap_file_pages	252
+#define __NR_set_tid_address	253
+#define __NR_timer_create	254
+#define __NR_timer_settime	255
+#define __NR_timer_gettime	256
+#define __NR_timer_getoverrun	257
+#define __NR_timer_delete	258
+#define __NR_clock_settime	259
+#define __NR_clock_gettime	260
+#define __NR_clock_getres	261
+#define __NR_clock_nanosleep	262
+#define __NR_statfs64		263
+#define __NR_fstatfs64		264
+#define __NR_tgkill		265
+#define __NR_utimes		266
+#define __NR_fadvise64_64	267
+#define __NR_mbind		268
+#define __NR_get_mempolicy	269
+#define __NR_set_mempolicy	270
+#define __NR_mq_open		271
+#define __NR_mq_unlink		272
+#define __NR_mq_timedsend	273
+#define __NR_mq_timedreceive	274
+#define __NR_mq_notify		275
+#define __NR_mq_getsetattr	276
+#define __NR_waitid		277
+#define __NR_vserver		278
+#define __NR_add_key		279
+#define __NR_request_key	280
+#define __NR_keyctl		281
+#define __NR_ioprio_set		282
+#define __NR_ioprio_get		283
+#define __NR_inotify_init	284
+#define __NR_inotify_add_watch	285
+#define __NR_inotify_rm_watch	286
+#define __NR_migrate_pages	287
+#define __NR_openat		288
+#define __NR_mkdirat		289
+#define __NR_mknodat		290
+#define __NR_fchownat		291
+#define __NR_futimesat		292
+#define __NR_fstatat64		293
+#define __NR_unlinkat		294
+#define __NR_renameat		295
+#define __NR_linkat		296
+#define __NR_symlinkat		297
+#define __NR_readlinkat		298
+#define __NR_fchmodat		299
+#define __NR_faccessat		300
+#define __NR_pselect6		301
+#define __NR_ppoll		302
+#define __NR_unshare		303
+#define __NR_set_robust_list	304
+#define __NR_get_robust_list	305
+#define __NR_splice		306
+#define __NR_sync_file_range	307
+#define __NR_tee		308
+#define __NR_vmsplice		309
+#define __NR_move_pages		310
+#define __NR_sched_setaffinity	311
+#define __NR_sched_getaffinity	312
+#define __NR_kexec_load		313
+#define __NR_getcpu		314
+#define __NR_epoll_pwait	315
+#define __NR_utimensat		316
+#define __NR_signalfd		317
+#define __NR_timerfd_create	318
+#define __NR_eventfd		319
+#define __NR_fallocate		320
+#define __NR_timerfd_settime	321
+#define __NR_timerfd_gettime	322
+#define __NR_signalfd4		323
+#define __NR_eventfd2		324
+#define __NR_epoll_create1	325
+#define __NR_dup3		326
+#define __NR_pipe2		327
+#define __NR_inotify_init1	328
+
+#ifdef __KERNEL__
+
+#define NR_syscalls		329
+
+#define __ARCH_WANT_IPC_PARSE_VERSION
+#define __ARCH_WANT_OLD_READDIR
+#define __ARCH_WANT_OLD_STAT
+#define __ARCH_WANT_STAT64
+#define __ARCH_WANT_SYS_ALARM
+#define __ARCH_WANT_SYS_GETHOSTNAME
+#define __ARCH_WANT_SYS_PAUSE
+#define __ARCH_WANT_SYS_SGETMASK
+#define __ARCH_WANT_SYS_SIGNAL
+#define __ARCH_WANT_SYS_TIME
+#define __ARCH_WANT_SYS_UTIME
+#define __ARCH_WANT_SYS_WAITPID
+#define __ARCH_WANT_SYS_SOCKETCALL
+#define __ARCH_WANT_SYS_FADVISE64
+#define __ARCH_WANT_SYS_GETPGRP
+#define __ARCH_WANT_SYS_LLSEEK
+#define __ARCH_WANT_SYS_NICE
+#define __ARCH_WANT_SYS_OLD_GETRLIMIT
+#define __ARCH_WANT_SYS_OLDUMOUNT
+#define __ARCH_WANT_SYS_SIGPENDING
+#define __ARCH_WANT_SYS_SIGPROCMASK
+#define __ARCH_WANT_SYS_RT_SIGACTION
+
+/*
+ * "Conditional" syscalls
+ *
+ * What we want is __attribute__((weak,alias("sys_ni_syscall"))),
+ * but it doesn't work on all toolchains, so we just do it by hand
+ */
+#define cond_syscall(x) asm(".weak\t" #x "\n\t.set\t" #x ",sys_ni_syscall")
+
+#endif /* __KERNEL__ */
+#endif /* _ASM_M68K_UNISTD_H_ */
diff --git a/include/asm-m68knommu/user.h b/arch/m68knommu/include/asm/user.h
index a5a555b761c4..a5a555b761c4 100644
--- a/include/asm-m68knommu/user.h
+++ b/arch/m68knommu/include/asm/user.h
diff --git a/arch/m68knommu/kernel/syscalltable.S b/arch/m68knommu/kernel/syscalltable.S
index fca2e49917a3..812f8d8b7a85 100644
--- a/arch/m68knommu/kernel/syscalltable.S
+++ b/arch/m68knommu/kernel/syscalltable.S
@@ -341,6 +341,12 @@ ENTRY(sys_call_table)
 	.long sys_fallocate		/* 320 */
 	.long sys_timerfd_settime
 	.long sys_timerfd_gettime
+	.long sys_signalfd4
+	.long sys_eventfd2
+	.long sys_epoll_create1		/* 325 */
+	.long sys_dup3
+	.long sys_pipe2
+	.long sys_inotify_init1
 
 	.rept NR_syscalls-(.-sys_call_table)/4
 		.long sys_ni_syscall
diff --git a/arch/m68knommu/mm/init.c b/arch/m68knommu/mm/init.c
index 22e2a0d02b81..3bf249c53e41 100644
--- a/arch/m68knommu/mm/init.c
+++ b/arch/m68knommu/mm/init.c
@@ -62,33 +62,6 @@ static unsigned long empty_bad_page;
 
 unsigned long empty_zero_page;
 
-void show_mem(void)
-{
-    unsigned long i;
-    int free = 0, total = 0, reserved = 0, shared = 0;
-    int cached = 0;
-
-    printk(KERN_INFO "\nMem-info:\n");
-    show_free_areas();
-    i = max_mapnr;
-    while (i-- > 0) {
-	total++;
-	if (PageReserved(mem_map+i))
-	    reserved++;
-	else if (PageSwapCache(mem_map+i))
-	    cached++;
-	else if (!page_count(mem_map+i))
-	    free++;
-	else
-	    shared += page_count(mem_map+i) - 1;
-    }
-    printk(KERN_INFO "%d pages of RAM\n",total);
-    printk(KERN_INFO "%d free pages\n",free);
-    printk(KERN_INFO "%d reserved pages\n",reserved);
-    printk(KERN_INFO "%d pages shared\n",shared);
-    printk(KERN_INFO "%d pages swap cached\n",cached);
-}
-
 extern unsigned long memory_start;
 extern unsigned long memory_end;
 
diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index b9c754f4070c..4da736e25333 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -3,6 +3,7 @@ config MIPS
 	default y
 	select HAVE_IDE
 	select HAVE_OPROFILE
+	select HAVE_ARCH_KGDB
 	# Horrible source of confusion.  Die, die, die ...
 	select EMBEDDED
 	select RTC_LIB
@@ -34,7 +35,6 @@ config BASLER_EXCITE
 	select SYS_HAS_CPU_RM9000
 	select SYS_SUPPORTS_32BIT_KERNEL
 	select SYS_SUPPORTS_BIG_ENDIAN
-	select SYS_SUPPORTS_KGDB
 	help
 	  The eXcite is a smart camera platform manufactured by
 	  Basler Vision Technologies AG.
@@ -280,7 +280,6 @@ config PMC_MSP
 	select SYS_HAS_CPU_MIPS32_R2
 	select SYS_SUPPORTS_32BIT_KERNEL
 	select SYS_SUPPORTS_BIG_ENDIAN
-	select SYS_SUPPORTS_KGDB
 	select IRQ_CPU
 	select SERIAL_8250
 	select SERIAL_8250_CONSOLE
@@ -306,7 +305,6 @@ config PMC_YOSEMITE
 	select SYS_SUPPORTS_64BIT_KERNEL
 	select SYS_SUPPORTS_BIG_ENDIAN
 	select SYS_SUPPORTS_HIGHMEM
-	select SYS_SUPPORTS_KGDB
 	select SYS_SUPPORTS_SMP
 	help
 	  Yosemite is an evaluation board for the RM9000x2 processor
@@ -359,7 +357,6 @@ config SGI_IP27
 	select SYS_HAS_CPU_R10000
 	select SYS_SUPPORTS_64BIT_KERNEL
 	select SYS_SUPPORTS_BIG_ENDIAN
-	select SYS_SUPPORTS_KGDB
 	select SYS_SUPPORTS_NUMA
 	select SYS_SUPPORTS_SMP
 	select GENERIC_HARDIRQS_NO__DO_IRQ
@@ -475,7 +472,6 @@ config SIBYTE_SWARM
 	select SYS_HAS_CPU_SB1
 	select SYS_SUPPORTS_BIG_ENDIAN
 	select SYS_SUPPORTS_HIGHMEM
-	select SYS_SUPPORTS_KGDB
 	select SYS_SUPPORTS_LITTLE_ENDIAN
 	select ZONE_DMA32 if 64BIT
 
@@ -713,7 +709,7 @@ config CSRC_SB1250
 
 config GPIO_TXX9
 	select GENERIC_GPIO
-	select HAVE_GPIO_LIB
+	select ARCH_REQUIRE_GPIOLIB
 	bool
 
 config CFE
@@ -868,7 +864,6 @@ config SOC_PNX8550
 	select SYS_HAS_EARLY_PRINTK
 	select SYS_SUPPORTS_32BIT_KERNEL
 	select GENERIC_HARDIRQS_NO__DO_IRQ
-	select SYS_SUPPORTS_KGDB
 	select GENERIC_GPIO
 
 config SWAP_IO_SPACE
diff --git a/arch/mips/Kconfig.debug b/arch/mips/Kconfig.debug
index f18cf92650e3..765c8e287d2b 100644
--- a/arch/mips/Kconfig.debug
+++ b/arch/mips/Kconfig.debug
@@ -34,28 +34,6 @@ config SMTC_IDLE_HOOK_DEBUG
 	  arch/mips/kernel/smtc.c.  This debugging option result in significant
 	  overhead so should be disabled in production kernels.
 
-config KGDB
-	bool "Remote GDB kernel debugging"
-	depends on DEBUG_KERNEL && SYS_SUPPORTS_KGDB
-	select DEBUG_INFO
-	help
-	  If you say Y here, it will be possible to remotely debug the MIPS
-	  kernel using gdb. This enlarges your kernel image disk size by
-	  several megabytes and requires a machine with more than 16 MB,
-	  better 32 MB RAM to avoid excessive linking time. This is only
-	  useful for kernel hackers. If unsure, say N.
-
-config SYS_SUPPORTS_KGDB
-	bool
-
-config GDB_CONSOLE
-	bool "Console output to GDB"
-	depends on KGDB
-	help
-	  If you are using GDB for remote debugging over a serial port and
-	  would like kernel messages to be formatted into GDB $O packets so
-	  that GDB prints them as program output, say 'Y'.
-
 config SB1XXX_CORELIS
 	bool "Corelis Debugger"
 	depends on SIBYTE_SB1xxx_SOC
diff --git a/arch/mips/au1000/Kconfig b/arch/mips/au1000/Kconfig
index 1fe97cccead1..e4a057d80ab6 100644
--- a/arch/mips/au1000/Kconfig
+++ b/arch/mips/au1000/Kconfig
@@ -134,4 +134,3 @@ config SOC_AU1X00
 	select SYS_HAS_CPU_MIPS32_R1
 	select SYS_SUPPORTS_32BIT_KERNEL
 	select SYS_SUPPORTS_APM_EMULATION
-	select SYS_SUPPORTS_KGDB
diff --git a/arch/mips/au1000/common/Makefile b/arch/mips/au1000/common/Makefile
index dd0e19dacfcf..df48fd65bbf3 100644
--- a/arch/mips/au1000/common/Makefile
+++ b/arch/mips/au1000/common/Makefile
@@ -9,7 +9,6 @@ obj-y += prom.o irq.o puts.o time.o reset.o \
 	au1xxx_irqmap.o clocks.o platform.o power.o setup.o \
 	sleeper.o cputable.o dma.o dbdma.o gpio.o
 
-obj-$(CONFIG_KGDB)		+= dbg_io.o
 obj-$(CONFIG_PCI)		+= pci.o
 
 EXTRA_CFLAGS += -Werror
diff --git a/arch/mips/au1000/common/dbg_io.c b/arch/mips/au1000/common/dbg_io.c
deleted file mode 100644
index af5be7df2f2a..000000000000
--- a/arch/mips/au1000/common/dbg_io.c
+++ /dev/null
@@ -1,109 +0,0 @@
-#include <linux/types.h>
-
-#include <asm/mach-au1x00/au1000.h>
-
-#ifdef CONFIG_KGDB
-
-/*
- * FIXME the user should be able to select the
- * uart to be used for debugging.
- */
-#define DEBUG_BASE  UART_DEBUG_BASE
-
-#define         UART16550_BAUD_2400             2400
-#define         UART16550_BAUD_4800             4800
-#define         UART16550_BAUD_9600             9600
-#define         UART16550_BAUD_19200            19200
-#define         UART16550_BAUD_38400            38400
-#define         UART16550_BAUD_57600            57600
-#define         UART16550_BAUD_115200           115200
-
-#define         UART16550_PARITY_NONE           0
-#define         UART16550_PARITY_ODD            0x08
-#define         UART16550_PARITY_EVEN           0x18
-#define         UART16550_PARITY_MARK           0x28
-#define         UART16550_PARITY_SPACE          0x38
-
-#define         UART16550_DATA_5BIT             0x0
-#define         UART16550_DATA_6BIT             0x1
-#define         UART16550_DATA_7BIT             0x2
-#define         UART16550_DATA_8BIT             0x3
-
-#define         UART16550_STOP_1BIT             0x0
-#define         UART16550_STOP_2BIT             0x4
-
-
-#define UART_RX		0	/* Receive buffer */
-#define UART_TX		4	/* Transmit buffer */
-#define UART_IER	8	/* Interrupt Enable Register */
-#define UART_IIR	0xC	/* Interrupt ID Register */
-#define UART_FCR	0x10	/* FIFO Control Register */
-#define UART_LCR	0x14	/* Line Control Register */
-#define UART_MCR	0x18	/* Modem Control Register */
-#define UART_LSR	0x1C	/* Line Status Register */
-#define UART_MSR	0x20	/* Modem Status Register */
-#define UART_CLK	0x28	/* Baud Rat4e Clock Divider */
-#define UART_MOD_CNTRL	0x100	/* Module Control */
-
-/* memory-mapped read/write of the port */
-#define UART16550_READ(y)     (au_readl(DEBUG_BASE + y) & 0xff)
-#define UART16550_WRITE(y, z) (au_writel(z & 0xff, DEBUG_BASE + y))
-
-extern unsigned long calc_clock(void);
-
-void debugInit(u32 baud, u8 data, u8 parity, u8 stop)
-{
-	if (UART16550_READ(UART_MOD_CNTRL) != 0x3)
-		UART16550_WRITE(UART_MOD_CNTRL, 3);
-	calc_clock();
-
-	/* disable interrupts */
-	UART16550_WRITE(UART_IER, 0);
-
-	/* set up baud rate */
-	{
-		u32 divisor;
-
-		/* set divisor */
-		divisor = get_au1x00_uart_baud_base() / baud;
-		UART16550_WRITE(UART_CLK, divisor & 0xffff);
-	}
-
-	/* set data format */
-	UART16550_WRITE(UART_LCR, (data | parity | stop));
-}
-
-static int remoteDebugInitialized;
-
-u8 getDebugChar(void)
-{
-	if (!remoteDebugInitialized) {
-		remoteDebugInitialized = 1;
-		debugInit(UART16550_BAUD_115200,
-			  UART16550_DATA_8BIT,
-			  UART16550_PARITY_NONE,
-			  UART16550_STOP_1BIT);
-	}
-
-	while ((UART16550_READ(UART_LSR) & 0x1) == 0);
-	return UART16550_READ(UART_RX);
-}
-
-
-int putDebugChar(u8 byte)
-{
-	if (!remoteDebugInitialized) {
-		remoteDebugInitialized = 1;
-		debugInit(UART16550_BAUD_115200,
-			  UART16550_DATA_8BIT,
-			  UART16550_PARITY_NONE,
-			  UART16550_STOP_1BIT);
-	}
-
-	while ((UART16550_READ(UART_LSR) & 0x40) == 0);
-	UART16550_WRITE(UART_TX, byte);
-
-	return 1;
-}
-
-#endif
diff --git a/arch/mips/au1000/db1x00/init.c b/arch/mips/au1000/db1x00/init.c
index 5ebe0de5e459..847413514964 100644
--- a/arch/mips/au1000/db1x00/init.c
+++ b/arch/mips/au1000/db1x00/init.c
@@ -57,6 +57,6 @@ void __init prom_init(void)
 	if (!memsize_str)
 		memsize = 0x04000000;
 	else
-		memsize = strict_strtol(memsize_str, 0, NULL);
+		strict_strtol(memsize_str, 0, &memsize);
 	add_memory_region(0, memsize, BOOT_MEM_RAM);
 }
diff --git a/arch/mips/au1000/mtx-1/init.c b/arch/mips/au1000/mtx-1/init.c
index 33a4aebe0cba..3bae13c28954 100644
--- a/arch/mips/au1000/mtx-1/init.c
+++ b/arch/mips/au1000/mtx-1/init.c
@@ -55,6 +55,6 @@ void __init prom_init(void)
 	if (!memsize_str)
 		memsize = 0x04000000;
 	else
-		memsize = strict_strtol(memsize_str, 0, NULL);
+		strict_strtol(memsize_str, 0, &memsize);
 	add_memory_region(0, memsize, BOOT_MEM_RAM);
 }
diff --git a/arch/mips/au1000/pb1000/init.c b/arch/mips/au1000/pb1000/init.c
index 3837365d613d..8a9c7d57208d 100644
--- a/arch/mips/au1000/pb1000/init.c
+++ b/arch/mips/au1000/pb1000/init.c
@@ -52,6 +52,6 @@ void __init prom_init(void)
 	if (!memsize_str)
 		memsize = 0x04000000;
 	else
-		memsize = strict_strtol(memsize_str, 0, NULL);
+		strict_strtol(memsize_str, 0, &memsize);
 	add_memory_region(0, memsize, BOOT_MEM_RAM);
 }
diff --git a/arch/mips/au1000/pb1100/init.c b/arch/mips/au1000/pb1100/init.c
index 8355483f3de2..7c6792308bc5 100644
--- a/arch/mips/au1000/pb1100/init.c
+++ b/arch/mips/au1000/pb1100/init.c
@@ -54,7 +54,7 @@ void __init prom_init(void)
 	if (!memsize_str)
 		memsize = 0x04000000;
 	else
-		memsize = strict_strtol(memsize_str, 0, NULL);
+		strict_strtol(memsize_str, 0, &memsize);
 
 	add_memory_region(0, memsize, BOOT_MEM_RAM);
 }
diff --git a/arch/mips/au1000/pb1200/init.c b/arch/mips/au1000/pb1200/init.c
index 09fd63b86062..e9b2a0fd48ae 100644
--- a/arch/mips/au1000/pb1200/init.c
+++ b/arch/mips/au1000/pb1200/init.c
@@ -53,6 +53,6 @@ void __init prom_init(void)
 	if (!memsize_str)
 		memsize = 0x08000000;
 	else
-		memsize = strict_strtol(memsize_str, 0, NULL);
+		strict_strtol(memsize_str, 0, &memsize);
 	add_memory_region(0, memsize, BOOT_MEM_RAM);
 }
diff --git a/arch/mips/au1000/pb1500/init.c b/arch/mips/au1000/pb1500/init.c
index 49f51e165863..3b6e395cf952 100644
--- a/arch/mips/au1000/pb1500/init.c
+++ b/arch/mips/au1000/pb1500/init.c
@@ -53,6 +53,6 @@ void __init prom_init(void)
 	if (!memsize_str)
 		memsize = 0x04000000;
 	else
-		memsize = strict_strtol(memsize_str, 0, NULL);
+		strict_strtol(memsize_str, 0, &memsize);
 	add_memory_region(0, memsize, BOOT_MEM_RAM);
 }
diff --git a/arch/mips/au1000/pb1550/init.c b/arch/mips/au1000/pb1550/init.c
index 1b5f58434bb7..e1055a13a1a0 100644
--- a/arch/mips/au1000/pb1550/init.c
+++ b/arch/mips/au1000/pb1550/init.c
@@ -53,6 +53,6 @@ void __init prom_init(void)
 	if (!memsize_str)
 		memsize = 0x08000000;
 	else
-		memsize = strict_strtol(memsize_str, 0, NULL);
+		strict_strtol(memsize_str, 0, &memsize);
 	add_memory_region(0, memsize, BOOT_MEM_RAM);
 }
diff --git a/arch/mips/au1000/xxs1500/init.c b/arch/mips/au1000/xxs1500/init.c
index b849bf501c04..7516434760a1 100644
--- a/arch/mips/au1000/xxs1500/init.c
+++ b/arch/mips/au1000/xxs1500/init.c
@@ -53,6 +53,6 @@ void __init prom_init(void)
 	if (!memsize_str)
 		memsize = 0x04000000;
 	else
-		memsize = strict_strtol(memsize_str, 0, NULL);
+		strict_strtol(memsize_str, 0, &memsize);
 	add_memory_region(0, memsize, BOOT_MEM_RAM);
 }
diff --git a/arch/mips/basler/excite/Makefile b/arch/mips/basler/excite/Makefile
index 519142c2e4ef..cff29cf46d03 100644
--- a/arch/mips/basler/excite/Makefile
+++ b/arch/mips/basler/excite/Makefile
@@ -5,5 +5,4 @@
 obj-$(CONFIG_BASLER_EXCITE)	+= excite_irq.o excite_prom.o excite_setup.o \
 				   excite_device.o excite_procfs.o
 
-obj-$(CONFIG_KGDB)		+= excite_dbg_io.o
 obj-m				+= excite_iodev.o
diff --git a/arch/mips/basler/excite/excite_dbg_io.c b/arch/mips/basler/excite/excite_dbg_io.c
deleted file mode 100644
index d289e3a868cf..000000000000
--- a/arch/mips/basler/excite/excite_dbg_io.c
+++ /dev/null
@@ -1,121 +0,0 @@
-/*
- *  Copyright (C) 2004 by Basler Vision Technologies AG
- *  Author: Thomas Koeller <thomas.koeller@baslerweb.com>
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License as published by
- *  the Free Software Foundation; either version 2 of the License, or
- *  (at your option) any later version.
- *
- *  This program is distributed in the hope that it will be useful,
- *  but WITHOUT ANY WARRANTY; without even the implied warranty of
- *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *  GNU General Public License for more details.
- *
- *  You should have received a copy of the GNU General Public License
- *  along with this program; if not, write to the Free Software
- *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#include <linux/linkage.h>
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <asm/gdb-stub.h>
-#include <asm/rm9k-ocd.h>
-#include <excite.h>
-
-#if defined(CONFIG_SERIAL_8250) && CONFIG_SERIAL_8250_NR_UARTS > 1
-#error Debug port used by serial driver
-#endif
-
-#define UART_CLK		25000000
-#define BASE_BAUD		(UART_CLK / 16)
-#define REGISTER_BASE_0		0x0208UL
-#define REGISTER_BASE_1		0x0238UL
-
-#define REGISTER_BASE_DBG	REGISTER_BASE_1
-
-#define CPRR	0x0004
-#define UACFG	0x0200
-#define UAINTS	0x0204
-#define UARBR	(REGISTER_BASE_DBG + 0x0000)
-#define UATHR	(REGISTER_BASE_DBG + 0x0004)
-#define UADLL	(REGISTER_BASE_DBG + 0x0008)
-#define UAIER	(REGISTER_BASE_DBG + 0x000c)
-#define UADLH	(REGISTER_BASE_DBG + 0x0010)
-#define UAIIR	(REGISTER_BASE_DBG + 0x0014)
-#define UAFCR	(REGISTER_BASE_DBG + 0x0018)
-#define UALCR	(REGISTER_BASE_DBG + 0x001c)
-#define UAMCR	(REGISTER_BASE_DBG + 0x0020)
-#define UALSR	(REGISTER_BASE_DBG + 0x0024)
-#define UAMSR	(REGISTER_BASE_DBG + 0x0028)
-#define UASCR	(REGISTER_BASE_DBG + 0x002c)
-
-#define	PARITY_NONE	0
-#define	PARITY_ODD	0x08
-#define	PARITY_EVEN	0x18
-#define	PARITY_MARK	0x28
-#define	PARITY_SPACE	0x38
-
-#define	DATA_5BIT	0x0
-#define	DATA_6BIT	0x1
-#define	DATA_7BIT	0x2
-#define	DATA_8BIT	0x3
-
-#define	STOP_1BIT	0x0
-#define	STOP_2BIT	0x4
-
-#define BAUD_DBG	57600
-#define	PARITY_DBG	PARITY_NONE
-#define	DATA_DBG	DATA_8BIT
-#define	STOP_DBG	STOP_1BIT
-
-/* Initialize the serial port for KGDB debugging */
-void __init excite_kgdb_init(void)
-{
-	const u32 divisor = BASE_BAUD / BAUD_DBG;
-
-	/* Take the UART out of reset */
-	titan_writel(0x00ff1cff, CPRR);
-	titan_writel(0x00000000, UACFG);
-	titan_writel(0x00000002, UACFG);
-
-	titan_writel(0x0, UALCR);
-	titan_writel(0x0, UAIER);
-
-	/* Disable FIFOs */
-	titan_writel(0x00, UAFCR);
-
-	titan_writel(0x80, UALCR);
-	titan_writel(divisor & 0xff, UADLL);
-	titan_writel((divisor & 0xff00) >> 8, UADLH);
-	titan_writel(0x0, UALCR);
-
-	titan_writel(DATA_DBG | PARITY_DBG | STOP_DBG, UALCR);
-
-	/* Enable receiver interrupt */
-	titan_readl(UARBR);
-	titan_writel(0x1, UAIER);
-}
-
-int getDebugChar(void)
-{
-	while (!(titan_readl(UALSR) & 0x1));
-	return titan_readl(UARBR);
-}
-
-int putDebugChar(int data)
-{
-	while (!(titan_readl(UALSR) & 0x20));
-	titan_writel(data, UATHR);
-	return 1;
-}
-
-/* KGDB interrupt handler */
-asmlinkage void excite_kgdb_inthdl(void)
-{
-	if (unlikely(
-		((titan_readl(UAIIR) & 0x7) == 4)
-		&& ((titan_readl(UARBR) & 0xff) == 0x3)))
-			set_async_breakpoint(&regs->cp0_epc);
-}
diff --git a/arch/mips/basler/excite/excite_irq.c b/arch/mips/basler/excite/excite_irq.c
index 4903e067916b..934e0a6b1011 100644
--- a/arch/mips/basler/excite/excite_irq.c
+++ b/arch/mips/basler/excite/excite_irq.c
@@ -50,10 +50,6 @@ void __init arch_init_irq(void)
 	mips_cpu_irq_init();
 	rm7k_cpu_irq_init();
 	rm9k_cpu_irq_init();
-
-#ifdef CONFIG_KGDB
-	excite_kgdb_init();
-#endif
 }
 
 asmlinkage void plat_irq_dispatch(void)
@@ -90,9 +86,6 @@ asmlinkage void plat_irq_dispatch(void)
 	msgint	    = msgintflags & msgintmask & (0x1 << (TITAN_MSGINT % 0x20));
 	if ((pending & (1 << TITAN_IRQ)) && msgint) {
 		ocd_writel(msgint, INTP0Clear0 + (TITAN_MSGINT / 0x20 * 0x10));
-#if defined(CONFIG_KGDB)
-		excite_kgdb_inthdl();
-#endif
 		do_IRQ(TITAN_IRQ);
 		return;
 	}
diff --git a/arch/mips/basler/excite/excite_setup.c b/arch/mips/basler/excite/excite_setup.c
index 6dd8f0d46d09..d66b3b8edf2a 100644
--- a/arch/mips/basler/excite/excite_setup.c
+++ b/arch/mips/basler/excite/excite_setup.c
@@ -95,13 +95,13 @@ static int __init excite_init_console(void)
 	/* Take the DUART out of reset */
 	titan_writel(0x00ff1cff, CPRR);
 
-#if defined(CONFIG_KGDB) || (CONFIG_SERIAL_8250_NR_UARTS > 1)
+#if (CONFIG_SERIAL_8250_NR_UARTS > 1)
 	/* Enable both ports */
 	titan_writel(MASK_SER0 | MASK_SER1, UACFG);
 #else
 	/* Enable port #0 only */
 	titan_writel(MASK_SER0, UACFG);
-#endif	/* defined(CONFIG_KGDB) */
+#endif
 
  	/*
 	 * Set up serial port #0. Do not use autodetection; the result is
diff --git a/arch/mips/configs/cobalt_defconfig b/arch/mips/configs/cobalt_defconfig
index 2678b7ec3351..eb44b72254af 100644
--- a/arch/mips/configs/cobalt_defconfig
+++ b/arch/mips/configs/cobalt_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.23-rc5
-# Thu Sep  6 13:14:29 2007
+# Linux kernel version: 2.6.26
+# Fri Jul 25 10:25:34 2008
 #
 CONFIG_MIPS=y
 
@@ -10,9 +10,11 @@ CONFIG_MIPS=y
 #
 # CONFIG_MACH_ALCHEMY is not set
 # CONFIG_BASLER_EXCITE is not set
+# CONFIG_BCM47XX is not set
 CONFIG_MIPS_COBALT=y
 # CONFIG_MACH_DECSTATION is not set
 # CONFIG_MACH_JAZZ is not set
+# CONFIG_LASAT is not set
 # CONFIG_LEMOTE_FULONG is not set
 # CONFIG_MIPS_MALTA is not set
 # CONFIG_MIPS_SIM is not set
@@ -24,6 +26,7 @@ CONFIG_MIPS_COBALT=y
 # CONFIG_PMC_YOSEMITE is not set
 # CONFIG_SGI_IP22 is not set
 # CONFIG_SGI_IP27 is not set
+# CONFIG_SGI_IP28 is not set
 # CONFIG_SGI_IP32 is not set
 # CONFIG_SIBYTE_CRHINE is not set
 # CONFIG_SIBYTE_CARMEL is not set
@@ -34,19 +37,25 @@ CONFIG_MIPS_COBALT=y
 # CONFIG_SIBYTE_SENTOSA is not set
 # CONFIG_SIBYTE_BIGSUR is not set
 # CONFIG_SNI_RM is not set
-# CONFIG_TOSHIBA_JMR3927 is not set
-# CONFIG_TOSHIBA_RBTX4927 is not set
-# CONFIG_TOSHIBA_RBTX4938 is not set
+# CONFIG_MACH_TX39XX is not set
+# CONFIG_MACH_TX49XX is not set
+# CONFIG_MIKROTIK_RB532 is not set
 # CONFIG_WR_PPMC is not set
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
 # CONFIG_ARCH_HAS_ILOG2_U32 is not set
 # CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_ARCH_SUPPORTS_OPROFILE=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CMOS_UPDATE=y
 CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
 CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_CEVT_GT641XX=y
+CONFIG_CEVT_R4K=y
+CONFIG_CSRC_R4K=y
 CONFIG_DMA_NONCOHERENT=y
 CONFIG_DMA_NEED_PCI_MAP_STATE=y
 CONFIG_EARLY_PRINTK=y
@@ -108,6 +117,7 @@ CONFIG_CPU_HAS_SYNC=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_IRQ_PROBE=y
 CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_POPULATES_NODE_MAP=y
 CONFIG_SELECT_MEMORY_MODEL=y
 CONFIG_FLATMEM_MANUAL=y
 # CONFIG_DISCONTIGMEM_MANUAL is not set
@@ -115,10 +125,16 @@ CONFIG_FLATMEM_MANUAL=y
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_RESOURCES_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
 CONFIG_VIRT_TO_BUS=y
+# CONFIG_TICK_ONESHOT is not set
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
 # CONFIG_HZ_48 is not set
 # CONFIG_HZ_100 is not set
 # CONFIG_HZ_128 is not set
@@ -151,23 +167,28 @@ CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_POSIX_MQUEUE is not set
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
 # CONFIG_AUDIT is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-CONFIG_SYSFS_DEPRECATED=y
+# CONFIG_CGROUPS is not set
+# CONFIG_GROUP_SCHED is not set
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 CONFIG_RELAY=y
+# CONFIG_NAMESPACES is not set
 # CONFIG_BLK_DEV_INITRD is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
+CONFIG_PCSPKR_PLATFORM=y
+CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
 CONFIG_ANON_INODES=y
@@ -177,23 +198,37 @@ CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_SLAB=y
-# CONFIG_SLUB is not set
+CONFIG_SLUB_DEBUG=y
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
 # CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_HAVE_IOREMAP_PROT is not set
+# CONFIG_HAVE_KPROBES is not set
+# CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+# CONFIG_HAVE_CLK is not set
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-# CONFIG_KMOD is not set
+CONFIG_KMOD=y
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -207,18 +242,18 @@ CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_CFQ is not set
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_CLASSIC_RCU=y
 
 #
 # Bus options (PCI, PCMCIA, EISA, ISA, TC)
 #
 CONFIG_HW_HAS_PCI=y
 CONFIG_PCI=y
+CONFIG_PCI_DOMAINS=y
 # CONFIG_ARCH_SUPPORTS_MSI is not set
+CONFIG_PCI_LEGACY=y
 CONFIG_MMU=y
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
+CONFIG_I8253=y
 # CONFIG_PCCARD is not set
 # CONFIG_HOTPLUG_PCI is not set
 
@@ -232,8 +267,8 @@ CONFIG_TRAD_SIGNALS=y
 #
 # Power management options
 #
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
 # CONFIG_PM is not set
-CONFIG_SUSPEND_UP_POSSIBLE=y
 
 #
 # Networking
@@ -250,6 +285,7 @@ CONFIG_XFRM=y
 CONFIG_XFRM_USER=y
 # CONFIG_XFRM_SUB_POLICY is not set
 CONFIG_XFRM_MIGRATE=y
+# CONFIG_XFRM_STATISTICS is not set
 CONFIG_NET_KEY=y
 CONFIG_NET_KEY_MIGRATE=y
 CONFIG_INET=y
@@ -269,6 +305,7 @@ CONFIG_IP_FIB_HASH=y
 CONFIG_INET_XFRM_MODE_TRANSPORT=y
 CONFIG_INET_XFRM_MODE_TUNNEL=y
 CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
 CONFIG_INET_DIAG=y
 CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
@@ -276,8 +313,6 @@ CONFIG_TCP_CONG_CUBIC=y
 CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
 # CONFIG_NETWORK_SECMARK is not set
 # CONFIG_NETFILTER is not set
 # CONFIG_IP_DCCP is not set
@@ -294,10 +329,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
 # CONFIG_NET_SCHED is not set
 
 #
@@ -305,6 +336,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 #
 # CONFIG_NET_PKTGEN is not set
 # CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
@@ -326,9 +358,12 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 #
 # Generic Driver Options
 #
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_SYS_HYPERVISOR is not set
 # CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
@@ -337,6 +372,7 @@ CONFIG_MTD=y
 CONFIG_MTD_PARTITIONS=y
 # CONFIG_MTD_REDBOOT_PARTS is not set
 # CONFIG_MTD_CMDLINE_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
 
 #
 # User Modules And Translation Layers
@@ -350,6 +386,7 @@ CONFIG_MTD_BLKDEVS=y
 # CONFIG_INFTL is not set
 # CONFIG_RFD_FTL is not set
 # CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
 
 #
 # RAM/ROM/Flash chip drivers
@@ -384,6 +421,7 @@ CONFIG_MTD_PHYSMAP=y
 CONFIG_MTD_PHYSMAP_START=0x0
 CONFIG_MTD_PHYSMAP_LEN=0x0
 CONFIG_MTD_PHYSMAP_BANKWIDTH=0
+# CONFIG_MTD_INTEL_VR_NOR is not set
 # CONFIG_MTD_PLATRAM is not set
 
 #
@@ -423,7 +461,9 @@ CONFIG_BLK_DEV_LOOP=y
 # CONFIG_BLK_DEV_RAM is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
 # CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
 #
@@ -462,10 +502,15 @@ CONFIG_SCSI_WAIT_SCAN=m
 # CONFIG_SCSI_FC_ATTRS is not set
 # CONFIG_SCSI_ISCSI_ATTRS is not set
 # CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
 # CONFIG_SCSI_LOWLEVEL is not set
+# CONFIG_SCSI_DH is not set
 CONFIG_ATA=y
 # CONFIG_ATA_NONSTANDARD is not set
+CONFIG_SATA_PMP=y
 # CONFIG_SATA_AHCI is not set
+# CONFIG_SATA_SIL24 is not set
+CONFIG_ATA_SFF=y
 # CONFIG_SATA_SVW is not set
 # CONFIG_ATA_PIIX is not set
 # CONFIG_SATA_MV is not set
@@ -475,7 +520,6 @@ CONFIG_ATA=y
 # CONFIG_SATA_PROMISE is not set
 # CONFIG_SATA_SX4 is not set
 # CONFIG_SATA_SIL is not set
-# CONFIG_SATA_SIL24 is not set
 # CONFIG_SATA_SIS is not set
 # CONFIG_SATA_ULI is not set
 # CONFIG_SATA_VIA is not set
@@ -504,7 +548,9 @@ CONFIG_ATA=y
 # CONFIG_PATA_MPIIX is not set
 # CONFIG_PATA_OLDPIIX is not set
 # CONFIG_PATA_NETCELL is not set
+# CONFIG_PATA_NINJA32 is not set
 # CONFIG_PATA_NS87410 is not set
+# CONFIG_PATA_NS87415 is not set
 # CONFIG_PATA_OPTI is not set
 # CONFIG_PATA_OPTIDMA is not set
 # CONFIG_PATA_PDC_OLD is not set
@@ -518,29 +564,27 @@ CONFIG_ATA=y
 CONFIG_PATA_VIA=y
 # CONFIG_PATA_WINBOND is not set
 # CONFIG_PATA_PLATFORM is not set
+# CONFIG_PATA_SCH is not set
 # CONFIG_MD is not set
+# CONFIG_FUSION is not set
 
 #
-# Fusion MPT device support
+# IEEE 1394 (FireWire) support
 #
-# CONFIG_FUSION is not set
-# CONFIG_FUSION_SPI is not set
-# CONFIG_FUSION_FC is not set
-# CONFIG_FUSION_SAS is not set
 
 #
-# IEEE 1394 (FireWire) support
+# Enable only one of the two stacks, unless you know what you are doing
 #
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
 # CONFIG_EQUALIZER is not set
 # CONFIG_TUN is not set
+# CONFIG_VETH is not set
 # CONFIG_ARCNET is not set
 # CONFIG_PHYLIB is not set
 CONFIG_NET_ETHERNET=y
@@ -562,7 +606,12 @@ CONFIG_TULIP=y
 # CONFIG_DM9102 is not set
 # CONFIG_ULI526X is not set
 # CONFIG_HP100 is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
 # CONFIG_NET_PCI is not set
+# CONFIG_B44 is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
 # CONFIG_TR is not set
@@ -572,6 +621,7 @@ CONFIG_TULIP=y
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
 
 #
 # USB Network Adapters
@@ -580,7 +630,6 @@ CONFIG_TULIP=y
 # CONFIG_USB_KAWETH is not set
 # CONFIG_USB_PEGASUS is not set
 # CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET_MII is not set
 # CONFIG_USB_USBNET is not set
 # CONFIG_WAN is not set
 # CONFIG_FDDI is not set
@@ -588,7 +637,6 @@ CONFIG_TULIP=y
 # CONFIG_PPP is not set
 # CONFIG_SLIP is not set
 # CONFIG_NET_FC is not set
-# CONFIG_SHAPER is not set
 # CONFIG_NETCONSOLE is not set
 # CONFIG_NETPOLL is not set
 # CONFIG_NET_POLL_CONTROLLER is not set
@@ -607,7 +655,6 @@ CONFIG_INPUT_POLLDEV=y
 #
 # CONFIG_INPUT_MOUSEDEV is not set
 # CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
 CONFIG_INPUT_EVDEV=y
 # CONFIG_INPUT_EVBUG is not set
 
@@ -642,7 +689,9 @@ CONFIG_VT=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
 CONFIG_VT_HW_CONSOLE_BINDING=y
+CONFIG_DEVKMEM=y
 # CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_NOZOMI is not set
 
 #
 # Serial drivers
@@ -664,65 +713,122 @@ CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_IPMI_HANDLER is not set
-# CONFIG_WATCHDOG is not set
 # CONFIG_HW_RANDOM is not set
-# CONFIG_RTC is not set
-CONFIG_COBALT_LCD=y
 # CONFIG_R3964 is not set
 # CONFIG_APPLICOM is not set
-# CONFIG_DRM is not set
 # CONFIG_RAW_DRIVER is not set
 # CONFIG_TCG_TPM is not set
 CONFIG_DEVPORT=y
 # CONFIG_I2C is not set
-
-#
-# SPI support
-#
 # CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+# CONFIG_WATCHDOG is not set
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
 
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
 
 #
 # Multimedia devices
 #
+
+#
+# Multimedia core support
+#
 # CONFIG_VIDEO_DEV is not set
 # CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
 # CONFIG_DAB is not set
 
 #
 # Graphics support
 #
+# CONFIG_DRM is not set
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
+# CONFIG_FB_CFB_FILLRECT is not set
+# CONFIG_FB_CFB_COPYAREA is not set
+# CONFIG_FB_CFB_IMAGEBLIT is not set
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
+# CONFIG_FB_SYS_FOPS is not set
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_CIRRUS is not set
+# CONFIG_FB_PM2 is not set
+# CONFIG_FB_CYBER2000 is not set
+# CONFIG_FB_ASILIANT is not set
+# CONFIG_FB_IMSTT is not set
+# CONFIG_FB_S1D13XXX is not set
+# CONFIG_FB_NVIDIA is not set
+# CONFIG_FB_RIVA is not set
+# CONFIG_FB_MATROX is not set
+# CONFIG_FB_RADEON is not set
+# CONFIG_FB_ATY128 is not set
+# CONFIG_FB_ATY is not set
+# CONFIG_FB_S3 is not set
+# CONFIG_FB_SAVAGE is not set
+# CONFIG_FB_SIS is not set
+# CONFIG_FB_NEOMAGIC is not set
+# CONFIG_FB_KYRO is not set
+# CONFIG_FB_3DFX is not set
+# CONFIG_FB_VOODOO1 is not set
+# CONFIG_FB_VT8623 is not set
+# CONFIG_FB_TRIDENT is not set
+# CONFIG_FB_ARK is not set
+# CONFIG_FB_PM3 is not set
+# CONFIG_FB_CARMINE is not set
+CONFIG_FB_COBALT=y
+# CONFIG_FB_VIRTUAL is not set
 # CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
 # Display device support
 #
 # CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
 
 #
 # Console display driver support
 #
 # CONFIG_VGA_CONSOLE is not set
 CONFIG_DUMMY_CONSOLE=y
-
-#
-# Sound
-#
+# CONFIG_FRAMEBUFFER_CONSOLE is not set
+# CONFIG_LOGO is not set
 # CONFIG_SOUND is not set
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=m
 # CONFIG_HID_DEBUG is not set
+# CONFIG_HIDRAW is not set
 
 #
 # USB Input Devices
@@ -743,6 +849,7 @@ CONFIG_USB_ARCH_HAS_OHCI=y
 CONFIG_USB_ARCH_HAS_EHCI=y
 CONFIG_USB=m
 # CONFIG_USB_DEBUG is not set
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
 
 #
 # Miscellaneous USB options
@@ -751,15 +858,18 @@ CONFIG_USB=m
 # CONFIG_USB_DEVICE_CLASS is not set
 # CONFIG_USB_DYNAMIC_MINORS is not set
 # CONFIG_USB_OTG is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
 
 #
 # USB Host Controller Drivers
 #
+# CONFIG_USB_C67X00_HCD is not set
 CONFIG_USB_EHCI_HCD=m
-# CONFIG_USB_EHCI_SPLIT_ISO is not set
 # CONFIG_USB_EHCI_ROOT_HUB_TT is not set
 # CONFIG_USB_EHCI_TT_NEWSCHED is not set
 # CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
 CONFIG_USB_OHCI_HCD=m
 # CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
 # CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
@@ -773,6 +883,7 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y
 #
 # CONFIG_USB_ACM is not set
 # CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
 
 #
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
@@ -785,6 +896,7 @@ CONFIG_USB_STORAGE=m
 # CONFIG_USB_STORAGE_DEBUG is not set
 # CONFIG_USB_STORAGE_DATAFAB is not set
 # CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_ISD200 is not set
 # CONFIG_USB_STORAGE_DPCM is not set
 # CONFIG_USB_STORAGE_USBAT is not set
 # CONFIG_USB_STORAGE_SDDR09 is not set
@@ -793,6 +905,7 @@ CONFIG_USB_STORAGE=m
 # CONFIG_USB_STORAGE_ALAUDA is not set
 # CONFIG_USB_STORAGE_ONETOUCH is not set
 # CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
 # CONFIG_USB_LIBUSUAL is not set
 
 #
@@ -800,15 +913,11 @@ CONFIG_USB_STORAGE=m
 #
 # CONFIG_USB_MDC800 is not set
 # CONFIG_USB_MICROTEK is not set
-CONFIG_USB_MON=y
+# CONFIG_USB_MON is not set
 
 #
 # USB port drivers
 #
-
-#
-# USB Serial Converter support
-#
 # CONFIG_USB_SERIAL is not set
 
 #
@@ -833,16 +942,10 @@ CONFIG_USB_MON=y
 # CONFIG_USB_LD is not set
 # CONFIG_USB_TRANCEVIBRATOR is not set
 # CONFIG_USB_IOWARRIOR is not set
-
-#
-# USB DSL modem support
-#
-
-#
-# USB Gadget Support
-#
+# CONFIG_USB_ISIGHTFW is not set
 # CONFIG_USB_GADGET is not set
 # CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
 CONFIG_NEW_LEDS=y
 CONFIG_LEDS_CLASS=y
 
@@ -858,6 +961,8 @@ CONFIG_LEDS_COBALT_RAQ=y
 CONFIG_LEDS_TRIGGERS=y
 # CONFIG_LEDS_TRIGGER_TIMER is not set
 # CONFIG_LEDS_TRIGGER_HEARTBEAT is not set
+# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set
+# CONFIG_ACCESSIBILITY is not set
 # CONFIG_INFINIBAND is not set
 CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
@@ -882,9 +987,10 @@ CONFIG_RTC_INTF_DEV=y
 # Platform RTC drivers
 #
 CONFIG_RTC_DRV_CMOS=y
+# CONFIG_RTC_DRV_DS1511 is not set
 # CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
 # CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
 # CONFIG_RTC_DRV_M48T86 is not set
 # CONFIG_RTC_DRV_M48T59 is not set
 # CONFIG_RTC_DRV_V3020 is not set
@@ -892,23 +998,7 @@ CONFIG_RTC_DRV_CMOS=y
 #
 # on-CPU RTC drivers
 #
-
-#
-# DMA Engine support
-#
-# CONFIG_DMA_ENGINE is not set
-
-#
-# DMA Clients
-#
-
-#
-# DMA Devices
-#
-
-#
-# Userspace I/O
-#
+# CONFIG_DMADEVICES is not set
 # CONFIG_UIO is not set
 
 #
@@ -923,22 +1013,22 @@ CONFIG_EXT3_FS=y
 CONFIG_EXT3_FS_XATTR=y
 CONFIG_EXT3_FS_POSIX_ACL=y
 CONFIG_EXT3_FS_SECURITY=y
-# CONFIG_EXT4DEV_FS is not set
+CONFIG_EXT4DEV_FS=y
+CONFIG_EXT4DEV_FS_XATTR=y
+CONFIG_EXT4DEV_FS_POSIX_ACL=y
+CONFIG_EXT4DEV_FS_SECURITY=y
 CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
+CONFIG_JBD2=y
 CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 CONFIG_FS_POSIX_ACL=y
 # CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
+CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
 # CONFIG_FUSE_FS is not set
@@ -967,7 +1057,6 @@ CONFIG_SYSFS=y
 CONFIG_TMPFS=y
 CONFIG_TMPFS_POSIX_ACL=y
 # CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
 CONFIG_CONFIGFS_FS=y
 
 #
@@ -983,32 +1072,28 @@ CONFIG_CONFIGFS_FS=y
 # CONFIG_JFFS2_FS is not set
 # CONFIG_CRAMFS is not set
 # CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
+CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 CONFIG_NFS_V3_ACL=y
 # CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
 CONFIG_NFSD=y
 CONFIG_NFSD_V2_ACL=y
 CONFIG_NFSD_V3=y
 CONFIG_NFSD_V3_ACL=y
 # CONFIG_NFSD_V4 is not set
-CONFIG_NFSD_TCP=y
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_EXPORTFS=y
 CONFIG_NFS_ACL_SUPPORT=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -1022,34 +1107,26 @@ CONFIG_SUNRPC=y
 #
 # CONFIG_PARTITION_ADVANCED is not set
 CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
 # CONFIG_NLS is not set
-
-#
-# Distributed Lock Manager
-#
 # CONFIG_DLM is not set
 
 #
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
 # Kernel hacking
 #
 CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 # CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
 # CONFIG_MAGIC_SYSRQ is not set
 # CONFIG_UNUSED_SYMBOLS is not set
 # CONFIG_DEBUG_FS is not set
 # CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
-CONFIG_CROSSCOMPILE=y
+# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_SAMPLES is not set
 CONFIG_CMDLINE=""
 
 #
@@ -1057,14 +1134,95 @@ CONFIG_CMDLINE=""
 #
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
-# CONFIG_CRYPTO is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+# CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_MD4 is not set
+# CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_LZO is not set
+CONFIG_CRYPTO_HW=y
+# CONFIG_CRYPTO_DEV_HIFN_795X is not set
 
 #
 # Library routines
 #
 CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
 # CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
+CONFIG_CRC16=y
+# CONFIG_CRC_T10DIF is not set
 # CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
diff --git a/arch/mips/configs/db1000_defconfig b/arch/mips/configs/db1000_defconfig
index ebb8ad62b3a3..a279165e3a7d 100644
--- a/arch/mips/configs/db1000_defconfig
+++ b/arch/mips/configs/db1000_defconfig
@@ -1092,7 +1092,6 @@ CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_CROSSCOMPILE=y
 CONFIG_CMDLINE=""
-CONFIG_SYS_SUPPORTS_KGDB=y
 
 #
 # Security options
diff --git a/arch/mips/configs/db1100_defconfig b/arch/mips/configs/db1100_defconfig
index ad4e5ef65592..8944d15caf13 100644
--- a/arch/mips/configs/db1100_defconfig
+++ b/arch/mips/configs/db1100_defconfig
@@ -1092,7 +1092,6 @@ CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_CROSSCOMPILE=y
 CONFIG_CMDLINE=""
-CONFIG_SYS_SUPPORTS_KGDB=y
 
 #
 # Security options
diff --git a/arch/mips/configs/db1200_defconfig b/arch/mips/configs/db1200_defconfig
index d0dc2e83ad35..ab17973107fd 100644
--- a/arch/mips/configs/db1200_defconfig
+++ b/arch/mips/configs/db1200_defconfig
@@ -1174,7 +1174,6 @@ CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_CROSSCOMPILE=y
 CONFIG_CMDLINE="mem=48M"
-CONFIG_SYS_SUPPORTS_KGDB=y
 
 #
 # Security options
diff --git a/arch/mips/configs/db1500_defconfig b/arch/mips/configs/db1500_defconfig
index 9155082313c8..b65803f19352 100644
--- a/arch/mips/configs/db1500_defconfig
+++ b/arch/mips/configs/db1500_defconfig
@@ -1392,7 +1392,6 @@ CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_CROSSCOMPILE=y
 CONFIG_CMDLINE=""
-CONFIG_SYS_SUPPORTS_KGDB=y
 
 #
 # Security options
diff --git a/arch/mips/configs/db1550_defconfig b/arch/mips/configs/db1550_defconfig
index e4e324422cd9..a190ac07740b 100644
--- a/arch/mips/configs/db1550_defconfig
+++ b/arch/mips/configs/db1550_defconfig
@@ -1209,7 +1209,6 @@ CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_CROSSCOMPILE=y
 CONFIG_CMDLINE=""
-CONFIG_SYS_SUPPORTS_KGDB=y
 
 #
 # Security options
diff --git a/arch/mips/configs/excite_defconfig b/arch/mips/configs/excite_defconfig
index 3572e80356d2..4e465e945991 100644
--- a/arch/mips/configs/excite_defconfig
+++ b/arch/mips/configs/excite_defconfig
@@ -1269,7 +1269,6 @@ CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_CROSSCOMPILE=y
 CONFIG_CMDLINE=""
-CONFIG_SYS_SUPPORTS_KGDB=y
 
 #
 # Security options
diff --git a/arch/mips/configs/ip27_defconfig b/arch/mips/configs/ip27_defconfig
index 138c575a0151..831d3e5a1ea6 100644
--- a/arch/mips/configs/ip27_defconfig
+++ b/arch/mips/configs/ip27_defconfig
@@ -943,7 +943,6 @@ CONFIG_ENABLE_MUST_CHECK=y
 # CONFIG_DEBUG_KERNEL is not set
 CONFIG_CROSSCOMPILE=y
 CONFIG_CMDLINE=""
-CONFIG_SYS_SUPPORTS_KGDB=y
 
 #
 # Security options
diff --git a/arch/mips/configs/msp71xx_defconfig b/arch/mips/configs/msp71xx_defconfig
index 59d19472b161..dd13db4d0fb9 100644
--- a/arch/mips/configs/msp71xx_defconfig
+++ b/arch/mips/configs/msp71xx_defconfig
@@ -1415,8 +1415,6 @@ CONFIG_FORCED_INLINING=y
 CONFIG_CROSSCOMPILE=y
 CONFIG_CMDLINE=""
 # CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_KGDB is not set
-CONFIG_SYS_SUPPORTS_KGDB=y
 # CONFIG_RUNTIME_DEBUG is not set
 # CONFIG_MIPS_UNCACHED is not set
 
diff --git a/arch/mips/configs/mtx1_defconfig b/arch/mips/configs/mtx1_defconfig
index bacf0dd0e345..db9272677aa2 100644
--- a/arch/mips/configs/mtx1_defconfig
+++ b/arch/mips/configs/mtx1_defconfig
@@ -3020,7 +3020,6 @@ CONFIG_MAGIC_SYSRQ=y
 # CONFIG_DEBUG_KERNEL is not set
 CONFIG_CROSSCOMPILE=y
 CONFIG_CMDLINE=""
-CONFIG_SYS_SUPPORTS_KGDB=y
 
 #
 # Security options
diff --git a/arch/mips/configs/pb1100_defconfig b/arch/mips/configs/pb1100_defconfig
index 6dfe6f793cef..9e21e333a2fc 100644
--- a/arch/mips/configs/pb1100_defconfig
+++ b/arch/mips/configs/pb1100_defconfig
@@ -1085,7 +1085,6 @@ CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_CROSSCOMPILE=y
 CONFIG_CMDLINE=""
-CONFIG_SYS_SUPPORTS_KGDB=y
 
 #
 # Security options
diff --git a/arch/mips/configs/pb1500_defconfig b/arch/mips/configs/pb1500_defconfig
index c965a87e6a96..af67ed4f71ae 100644
--- a/arch/mips/configs/pb1500_defconfig
+++ b/arch/mips/configs/pb1500_defconfig
@@ -1202,7 +1202,6 @@ CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_CROSSCOMPILE=y
 CONFIG_CMDLINE=""
-CONFIG_SYS_SUPPORTS_KGDB=y
 
 #
 # Security options
diff --git a/arch/mips/configs/pb1550_defconfig b/arch/mips/configs/pb1550_defconfig
index 0778996c682f..7956f56cbf3e 100644
--- a/arch/mips/configs/pb1550_defconfig
+++ b/arch/mips/configs/pb1550_defconfig
@@ -1195,7 +1195,6 @@ CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_CROSSCOMPILE=y
 CONFIG_CMDLINE=""
-CONFIG_SYS_SUPPORTS_KGDB=y
 
 #
 # Security options
diff --git a/arch/mips/configs/pnx8550-jbs_defconfig b/arch/mips/configs/pnx8550-jbs_defconfig
index 37c7b5ffd474..723bd5176a35 100644
--- a/arch/mips/configs/pnx8550-jbs_defconfig
+++ b/arch/mips/configs/pnx8550-jbs_defconfig
@@ -1216,10 +1216,8 @@ CONFIG_DEBUG_MUTEXES=y
 CONFIG_FORCED_INLINING=y
 # CONFIG_RCU_TORTURE_TEST is not set
 CONFIG_CROSSCOMPILE=y
-CONFIG_CMDLINE="console=ttyS1,38400n8 kgdb=ttyS0 root=/dev/nfs ip=bootp"
+CONFIG_CMDLINE="console=ttyS1,38400n8 root=/dev/nfs ip=bootp"
 # CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_KGDB is not set
-CONFIG_SYS_SUPPORTS_KGDB=y
 # CONFIG_RUNTIME_DEBUG is not set
 
 #
diff --git a/arch/mips/configs/pnx8550-stb810_defconfig b/arch/mips/configs/pnx8550-stb810_defconfig
index 893e5c4ab66d..b5052fb42e9e 100644
--- a/arch/mips/configs/pnx8550-stb810_defconfig
+++ b/arch/mips/configs/pnx8550-stb810_defconfig
@@ -1206,10 +1206,8 @@ CONFIG_DEBUG_SLAB=y
 CONFIG_FORCED_INLINING=y
 # CONFIG_RCU_TORTURE_TEST is not set
 CONFIG_CROSSCOMPILE=y
-CONFIG_CMDLINE="console=ttyS1,38400n8 kgdb=ttyS0 root=/dev/nfs ip=bootp"
+CONFIG_CMDLINE="console=ttyS1,38400n8 root=/dev/nfs ip=bootp"
 # CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_KGDB is not set
-CONFIG_SYS_SUPPORTS_KGDB=y
 # CONFIG_RUNTIME_DEBUG is not set
 
 #
diff --git a/arch/mips/configs/rbtx49xx_defconfig b/arch/mips/configs/rbtx49xx_defconfig
index e42aed5a38bb..c7c0864b8ce9 100644
--- a/arch/mips/configs/rbtx49xx_defconfig
+++ b/arch/mips/configs/rbtx49xx_defconfig
@@ -742,7 +742,6 @@ CONFIG_DEBUG_FS=y
 # CONFIG_DEBUG_KERNEL is not set
 # CONFIG_SAMPLES is not set
 CONFIG_CMDLINE=""
-CONFIG_SYS_SUPPORTS_KGDB=y
 
 #
 # Security options
diff --git a/arch/mips/configs/sb1250-swarm_defconfig b/arch/mips/configs/sb1250-swarm_defconfig
index 1ea97865f2ce..a9acaa2f9da3 100644
--- a/arch/mips/configs/sb1250-swarm_defconfig
+++ b/arch/mips/configs/sb1250-swarm_defconfig
@@ -963,7 +963,6 @@ CONFIG_ENABLE_MUST_CHECK=y
 # CONFIG_DEBUG_KERNEL is not set
 # CONFIG_SAMPLES is not set
 CONFIG_CMDLINE=""
-CONFIG_SYS_SUPPORTS_KGDB=y
 # CONFIG_SB1XXX_CORELIS is not set
 
 #
diff --git a/arch/mips/configs/yosemite_defconfig b/arch/mips/configs/yosemite_defconfig
index 7f86c43d1bda..ea8249c75b3f 100644
--- a/arch/mips/configs/yosemite_defconfig
+++ b/arch/mips/configs/yosemite_defconfig
@@ -827,8 +827,6 @@ CONFIG_FORCED_INLINING=y
 CONFIG_CROSSCOMPILE=y
 CONFIG_CMDLINE=""
 # CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_KGDB is not set
-CONFIG_SYS_SUPPORTS_KGDB=y
 # CONFIG_RUNTIME_DEBUG is not set
 
 #
diff --git a/arch/mips/emma2rh/markeins/platform.c b/arch/mips/emma2rh/markeins/platform.c
index 11567702b155..d70627de7cfe 100644
--- a/arch/mips/emma2rh/markeins/platform.c
+++ b/arch/mips/emma2rh/markeins/platform.c
@@ -34,7 +34,6 @@
 #include <asm/bcache.h>
 #include <asm/irq.h>
 #include <asm/reboot.h>
-#include <asm/gdb-stub.h>
 #include <asm/traps.h>
 #include <asm/debug.h>
 
diff --git a/arch/mips/emma2rh/markeins/setup.c b/arch/mips/emma2rh/markeins/setup.c
index 62bfb455d1b1..b6a23ad539f8 100644
--- a/arch/mips/emma2rh/markeins/setup.c
+++ b/arch/mips/emma2rh/markeins/setup.c
@@ -25,25 +25,9 @@
 #include <linux/init.h>
 #include <linux/kernel.h>
 #include <linux/types.h>
-#include <linux/initrd.h>
-#include <linux/irq.h>
-#include <linux/ide.h>
-#include <linux/ioport.h>
-#include <linux/param.h>	/* for HZ */
-#include <linux/root_dev.h>
-#include <linux/serial.h>
-#include <linux/serial_core.h>
-
-#include <asm/cpu.h>
-#include <asm/bootinfo.h>
-#include <asm/addrspace.h>
+
 #include <asm/time.h>
-#include <asm/bcache.h>
-#include <asm/irq.h>
 #include <asm/reboot.h>
-#include <asm/gdb-stub.h>
-#include <asm/traps.h>
-#include <asm/debug.h>
 
 #include <asm/emma2rh/emma2rh.h>
 
diff --git a/arch/mips/jazz/setup.c b/arch/mips/jazz/setup.c
index f60524e8bc44..7043f6b9ff3c 100644
--- a/arch/mips/jazz/setup.c
+++ b/arch/mips/jazz/setup.c
@@ -5,35 +5,22 @@
  * License.  See the file "COPYING" in the main directory of this archive
  * for more details.
  *
- * Copyright (C) 1996, 1997, 1998, 2001, 07 by Ralf Baechle
+ * Copyright (C) 1996, 1997, 1998, 2001, 07, 08 by Ralf Baechle
  * Copyright (C) 2001 MIPS Technologies, Inc.
  * Copyright (C) 2007 by Thomas Bogendoerfer
  */
 #include <linux/eisa.h>
-#include <linux/hdreg.h>
 #include <linux/init.h>
 #include <linux/ioport.h>
-#include <linux/sched.h>
-#include <linux/interrupt.h>
-#include <linux/mm.h>
 #include <linux/console.h>
-#include <linux/fb.h>
-#include <linux/ide.h>
-#include <linux/pm.h>
 #include <linux/screen_info.h>
 #include <linux/platform_device.h>
 #include <linux/serial_8250.h>
 
-#include <asm/bootinfo.h>
-#include <asm/irq.h>
 #include <asm/jazz.h>
 #include <asm/jazzdma.h>
 #include <asm/reboot.h>
-#include <asm/io.h>
 #include <asm/pgtable.h>
-#include <asm/time.h>
-#include <asm/traps.h>
-#include <asm/mc146818-time.h>
 
 extern asmlinkage void jazz_handle_int(void);
 
diff --git a/arch/mips/kernel/.gitignore b/arch/mips/kernel/.gitignore
new file mode 100644
index 000000000000..c5f676c3c224
--- /dev/null
+++ b/arch/mips/kernel/.gitignore
@@ -0,0 +1 @@
+vmlinux.lds
diff --git a/arch/mips/kernel/Makefile b/arch/mips/kernel/Makefile
index 0fd31974ba28..706f93974797 100644
--- a/arch/mips/kernel/Makefile
+++ b/arch/mips/kernel/Makefile
@@ -71,7 +71,7 @@ obj-$(CONFIG_MIPS32_COMPAT)	+= linux32.o ptrace32.o signal32.o
 obj-$(CONFIG_MIPS32_N32)	+= binfmt_elfn32.o scall64-n32.o signal_n32.o
 obj-$(CONFIG_MIPS32_O32)	+= binfmt_elfo32.o scall64-o32.o
 
-obj-$(CONFIG_KGDB)		+= gdb-low.o gdb-stub.o
+obj-$(CONFIG_KGDB)		+= kgdb.o
 obj-$(CONFIG_PROC_FS)		+= proc.o
 
 obj-$(CONFIG_64BIT)		+= cpu-bugs64.o
diff --git a/arch/mips/kernel/gdb-low.S b/arch/mips/kernel/gdb-low.S
deleted file mode 100644
index 2c446063636a..000000000000
--- a/arch/mips/kernel/gdb-low.S
+++ /dev/null
@@ -1,394 +0,0 @@
-/*
- * gdb-low.S contains the low-level trap handler for the GDB stub.
- *
- * Copyright (C) 1995 Andreas Busse
- */
-#include <linux/sys.h>
-
-#include <asm/asm.h>
-#include <asm/errno.h>
-#include <asm/irqflags.h>
-#include <asm/mipsregs.h>
-#include <asm/regdef.h>
-#include <asm/stackframe.h>
-#include <asm/gdb-stub.h>
-
-#ifdef CONFIG_32BIT
-#define DMFC0	mfc0
-#define DMTC0	mtc0
-#define LDC1	lwc1
-#define SDC1	lwc1
-#endif
-#ifdef CONFIG_64BIT
-#define DMFC0	dmfc0
-#define DMTC0	dmtc0
-#define LDC1	ldc1
-#define SDC1	ldc1
-#endif
-
-/*
- * [jsun] We reserves about 2x GDB_FR_SIZE in stack.  The lower (addressed)
- * part is used to store registers and passed to exception handler.
- * The upper part is reserved for "call func" feature where gdb client
- * saves some of the regs, setups call frame and passes args.
- *
- * A trace shows about 200 bytes are used to store about half of all regs.
- * The rest should be big enough for frame setup and passing args.
- */
-
-/*
- * The low level trap handler
- */
-		.align 	5
-		NESTED(trap_low, GDB_FR_SIZE, sp)
-		.set	noat
-		.set 	noreorder
-
-		mfc0	k0, CP0_STATUS
-		sll	k0, 3     		/* extract cu0 bit */
-		bltz	k0, 1f
-		move	k1, sp
-
-		/*
-		 * Called from user mode, go somewhere else.
-		 */
-		mfc0	k0, CP0_CAUSE
-		andi	k0, k0, 0x7c
-#ifdef CONFIG_64BIT
-		dsll	k0, k0, 1
-#endif
-		PTR_L	k1, saved_vectors(k0)
-		jr	k1
-		nop
-1:
-		move	k0, sp
-		PTR_SUBU sp, k1, GDB_FR_SIZE*2	# see comment above
-		LONG_S	k0, GDB_FR_REG29(sp)
-		LONG_S	$2, GDB_FR_REG2(sp)
-
-/*
- * First save the CP0 and special registers
- */
-
-		mfc0	v0, CP0_STATUS
-		LONG_S	v0, GDB_FR_STATUS(sp)
-		mfc0	v0, CP0_CAUSE
-		LONG_S	v0, GDB_FR_CAUSE(sp)
-		DMFC0	v0, CP0_EPC
-		LONG_S	v0, GDB_FR_EPC(sp)
-		DMFC0	v0, CP0_BADVADDR
-		LONG_S	v0, GDB_FR_BADVADDR(sp)
-		mfhi	v0
-		LONG_S	v0, GDB_FR_HI(sp)
-		mflo	v0
-		LONG_S	v0, GDB_FR_LO(sp)
-
-/*
- * Now the integer registers
- */
-
-		LONG_S	zero, GDB_FR_REG0(sp)		/* I know... */
-		LONG_S	$1, GDB_FR_REG1(sp)
-		/* v0 already saved */
-		LONG_S	$3, GDB_FR_REG3(sp)
-		LONG_S	$4, GDB_FR_REG4(sp)
-		LONG_S	$5, GDB_FR_REG5(sp)
-		LONG_S	$6, GDB_FR_REG6(sp)
-		LONG_S	$7, GDB_FR_REG7(sp)
-		LONG_S	$8, GDB_FR_REG8(sp)
-		LONG_S	$9, GDB_FR_REG9(sp)
-		LONG_S	$10, GDB_FR_REG10(sp)
-		LONG_S	$11, GDB_FR_REG11(sp)
-		LONG_S	$12, GDB_FR_REG12(sp)
-		LONG_S	$13, GDB_FR_REG13(sp)
-		LONG_S	$14, GDB_FR_REG14(sp)
-		LONG_S	$15, GDB_FR_REG15(sp)
-		LONG_S	$16, GDB_FR_REG16(sp)
-		LONG_S	$17, GDB_FR_REG17(sp)
-		LONG_S	$18, GDB_FR_REG18(sp)
-		LONG_S	$19, GDB_FR_REG19(sp)
-		LONG_S	$20, GDB_FR_REG20(sp)
-		LONG_S	$21, GDB_FR_REG21(sp)
-		LONG_S	$22, GDB_FR_REG22(sp)
-		LONG_S	$23, GDB_FR_REG23(sp)
-		LONG_S	$24, GDB_FR_REG24(sp)
-		LONG_S	$25, GDB_FR_REG25(sp)
-		LONG_S	$26, GDB_FR_REG26(sp)
-		LONG_S	$27, GDB_FR_REG27(sp)
-		LONG_S	$28, GDB_FR_REG28(sp)
-		/* sp already saved */
-		LONG_S	$30, GDB_FR_REG30(sp)
-		LONG_S	$31, GDB_FR_REG31(sp)
-
-		CLI				/* disable interrupts */
-		TRACE_IRQS_OFF
-
-/*
- * Followed by the floating point registers
- */
-		mfc0	v0, CP0_STATUS		/* FPU enabled? */
-		srl	v0, v0, 16
-		andi	v0, v0, (ST0_CU1 >> 16)
-
-		beqz	v0,2f			/* disabled, skip */
-		 nop
-
-		SDC1	$0, GDB_FR_FPR0(sp)
-		SDC1	$1, GDB_FR_FPR1(sp)
-		SDC1	$2, GDB_FR_FPR2(sp)
-		SDC1	$3, GDB_FR_FPR3(sp)
-		SDC1	$4, GDB_FR_FPR4(sp)
-		SDC1	$5, GDB_FR_FPR5(sp)
-		SDC1	$6, GDB_FR_FPR6(sp)
-		SDC1	$7, GDB_FR_FPR7(sp)
-		SDC1	$8, GDB_FR_FPR8(sp)
-		SDC1	$9, GDB_FR_FPR9(sp)
-		SDC1	$10, GDB_FR_FPR10(sp)
-		SDC1	$11, GDB_FR_FPR11(sp)
-		SDC1	$12, GDB_FR_FPR12(sp)
-		SDC1	$13, GDB_FR_FPR13(sp)
-		SDC1	$14, GDB_FR_FPR14(sp)
-		SDC1	$15, GDB_FR_FPR15(sp)
-		SDC1	$16, GDB_FR_FPR16(sp)
-		SDC1	$17, GDB_FR_FPR17(sp)
-		SDC1	$18, GDB_FR_FPR18(sp)
-		SDC1	$19, GDB_FR_FPR19(sp)
-		SDC1	$20, GDB_FR_FPR20(sp)
-		SDC1	$21, GDB_FR_FPR21(sp)
-		SDC1	$22, GDB_FR_FPR22(sp)
-		SDC1	$23, GDB_FR_FPR23(sp)
-		SDC1	$24, GDB_FR_FPR24(sp)
-		SDC1	$25, GDB_FR_FPR25(sp)
-		SDC1	$26, GDB_FR_FPR26(sp)
-		SDC1	$27, GDB_FR_FPR27(sp)
-		SDC1	$28, GDB_FR_FPR28(sp)
-		SDC1	$29, GDB_FR_FPR29(sp)
-		SDC1	$30, GDB_FR_FPR30(sp)
-		SDC1	$31, GDB_FR_FPR31(sp)
-
-/*
- * FPU control registers
- */
-
-		cfc1	v0, CP1_STATUS
-		LONG_S	v0, GDB_FR_FSR(sp)
-		cfc1	v0, CP1_REVISION
-		LONG_S	v0, GDB_FR_FIR(sp)
-
-/*
- * Current stack frame ptr
- */
-
-2:
-		LONG_S	sp, GDB_FR_FRP(sp)
-
-/*
- * CP0 registers (R4000/R4400 unused registers skipped)
- */
-
-		mfc0	v0, CP0_INDEX
-		LONG_S	v0, GDB_FR_CP0_INDEX(sp)
-		mfc0	v0, CP0_RANDOM
-		LONG_S	v0, GDB_FR_CP0_RANDOM(sp)
-		DMFC0	v0, CP0_ENTRYLO0
-		LONG_S	v0, GDB_FR_CP0_ENTRYLO0(sp)
-		DMFC0	v0, CP0_ENTRYLO1
-		LONG_S	v0, GDB_FR_CP0_ENTRYLO1(sp)
-		DMFC0	v0, CP0_CONTEXT
-		LONG_S	v0, GDB_FR_CP0_CONTEXT(sp)
-		mfc0	v0, CP0_PAGEMASK
-		LONG_S	v0, GDB_FR_CP0_PAGEMASK(sp)
-		mfc0	v0, CP0_WIRED
-		LONG_S	v0, GDB_FR_CP0_WIRED(sp)
-		DMFC0	v0, CP0_ENTRYHI
-		LONG_S	v0, GDB_FR_CP0_ENTRYHI(sp)
-		mfc0	v0, CP0_PRID
-		LONG_S	v0, GDB_FR_CP0_PRID(sp)
-
-		.set	at
-
-/*
- * Continue with the higher level handler
- */
-
-		move	a0,sp
-
-		jal	handle_exception
-		 nop
-
-/*
- * Restore all writable registers, in reverse order
- */
-
-		.set	noat
-
-		LONG_L	v0, GDB_FR_CP0_ENTRYHI(sp)
-		LONG_L	v1, GDB_FR_CP0_WIRED(sp)
-		DMTC0	v0, CP0_ENTRYHI
-		mtc0	v1, CP0_WIRED
-		LONG_L	v0, GDB_FR_CP0_PAGEMASK(sp)
-		LONG_L	v1, GDB_FR_CP0_ENTRYLO1(sp)
-		mtc0	v0, CP0_PAGEMASK
-		DMTC0	v1, CP0_ENTRYLO1
-		LONG_L	v0, GDB_FR_CP0_ENTRYLO0(sp)
-		LONG_L	v1, GDB_FR_CP0_INDEX(sp)
-		DMTC0	v0, CP0_ENTRYLO0
-		LONG_L	v0, GDB_FR_CP0_CONTEXT(sp)
-		mtc0	v1, CP0_INDEX
-		DMTC0	v0, CP0_CONTEXT
-
-
-/*
- * Next, the floating point registers
- */
-		mfc0	v0, CP0_STATUS		/* check if the FPU is enabled */
-		srl	v0, v0, 16
-		andi	v0, v0, (ST0_CU1 >> 16)
-
-		beqz	v0, 3f			/* disabled, skip */
-		 nop
-
-		LDC1	$31, GDB_FR_FPR31(sp)
-		LDC1	$30, GDB_FR_FPR30(sp)
-		LDC1	$29, GDB_FR_FPR29(sp)
-		LDC1	$28, GDB_FR_FPR28(sp)
-		LDC1	$27, GDB_FR_FPR27(sp)
-		LDC1	$26, GDB_FR_FPR26(sp)
-		LDC1	$25, GDB_FR_FPR25(sp)
-		LDC1	$24, GDB_FR_FPR24(sp)
-		LDC1	$23, GDB_FR_FPR23(sp)
-		LDC1	$22, GDB_FR_FPR22(sp)
-		LDC1	$21, GDB_FR_FPR21(sp)
-		LDC1	$20, GDB_FR_FPR20(sp)
-		LDC1	$19, GDB_FR_FPR19(sp)
-		LDC1	$18, GDB_FR_FPR18(sp)
-		LDC1	$17, GDB_FR_FPR17(sp)
-		LDC1	$16, GDB_FR_FPR16(sp)
-		LDC1	$15, GDB_FR_FPR15(sp)
-		LDC1	$14, GDB_FR_FPR14(sp)
-		LDC1	$13, GDB_FR_FPR13(sp)
-		LDC1	$12, GDB_FR_FPR12(sp)
-		LDC1	$11, GDB_FR_FPR11(sp)
-		LDC1	$10, GDB_FR_FPR10(sp)
-		LDC1	$9, GDB_FR_FPR9(sp)
-		LDC1	$8, GDB_FR_FPR8(sp)
-		LDC1	$7, GDB_FR_FPR7(sp)
-		LDC1	$6, GDB_FR_FPR6(sp)
-		LDC1	$5, GDB_FR_FPR5(sp)
-		LDC1	$4, GDB_FR_FPR4(sp)
-		LDC1	$3, GDB_FR_FPR3(sp)
-		LDC1	$2, GDB_FR_FPR2(sp)
-		LDC1	$1, GDB_FR_FPR1(sp)
-		LDC1	$0, GDB_FR_FPR0(sp)
-
-/*
- * Now the CP0 and integer registers
- */
-
-3:
-#ifdef CONFIG_MIPS_MT_SMTC
-		/* Read-modify write of Status must be atomic */
-		mfc0	t2, CP0_TCSTATUS
-		ori	t1, t2, TCSTATUS_IXMT
-		mtc0	t1, CP0_TCSTATUS
-		andi	t2, t2, TCSTATUS_IXMT
-		_ehb
-		DMT	9				# dmt	t1
-		jal	mips_ihb
-		nop
-#endif /* CONFIG_MIPS_MT_SMTC */
-		mfc0	t0, CP0_STATUS
-		ori	t0, 0x1f
-		xori	t0, 0x1f
-		mtc0	t0, CP0_STATUS
-#ifdef CONFIG_MIPS_MT_SMTC
-        	andi    t1, t1, VPECONTROL_TE
-        	beqz    t1, 9f
-		nop
-        	EMT					# emt
-9:
-		mfc0	t1, CP0_TCSTATUS
-		xori	t1, t1, TCSTATUS_IXMT
-		or	t1, t1, t2
-		mtc0	t1, CP0_TCSTATUS
-		_ehb
-#endif /* CONFIG_MIPS_MT_SMTC */
-		LONG_L	v0, GDB_FR_STATUS(sp)
-		LONG_L	v1, GDB_FR_EPC(sp)
-		mtc0	v0, CP0_STATUS
-		DMTC0	v1, CP0_EPC
-		LONG_L	v0, GDB_FR_HI(sp)
-		LONG_L	v1, GDB_FR_LO(sp)
-		mthi	v0
-		mtlo	v1
-		LONG_L	$31, GDB_FR_REG31(sp)
-		LONG_L	$30, GDB_FR_REG30(sp)
-		LONG_L	$28, GDB_FR_REG28(sp)
-		LONG_L	$27, GDB_FR_REG27(sp)
-		LONG_L	$26, GDB_FR_REG26(sp)
-		LONG_L	$25, GDB_FR_REG25(sp)
-		LONG_L	$24, GDB_FR_REG24(sp)
-		LONG_L	$23, GDB_FR_REG23(sp)
-		LONG_L	$22, GDB_FR_REG22(sp)
-		LONG_L	$21, GDB_FR_REG21(sp)
-		LONG_L	$20, GDB_FR_REG20(sp)
-		LONG_L	$19, GDB_FR_REG19(sp)
-		LONG_L	$18, GDB_FR_REG18(sp)
-		LONG_L	$17, GDB_FR_REG17(sp)
-		LONG_L	$16, GDB_FR_REG16(sp)
-		LONG_L	$15, GDB_FR_REG15(sp)
-		LONG_L	$14, GDB_FR_REG14(sp)
-		LONG_L	$13, GDB_FR_REG13(sp)
-		LONG_L	$12, GDB_FR_REG12(sp)
-		LONG_L	$11, GDB_FR_REG11(sp)
-		LONG_L	$10, GDB_FR_REG10(sp)
-		LONG_L	$9, GDB_FR_REG9(sp)
-		LONG_L	$8, GDB_FR_REG8(sp)
-		LONG_L	$7, GDB_FR_REG7(sp)
-		LONG_L	$6, GDB_FR_REG6(sp)
-		LONG_L	$5, GDB_FR_REG5(sp)
-		LONG_L	$4, GDB_FR_REG4(sp)
-		LONG_L	$3, GDB_FR_REG3(sp)
-		LONG_L	$2, GDB_FR_REG2(sp)
-		LONG_L	$1, GDB_FR_REG1(sp)
-#if defined(CONFIG_CPU_R3000) || defined(CONFIG_CPU_TX39XX)
-		LONG_L	k0, GDB_FR_EPC(sp)
-		LONG_L	$29, GDB_FR_REG29(sp)		/* Deallocate stack */
-		jr	k0
-		rfe
-#else
-		LONG_L	sp, GDB_FR_REG29(sp)		/* Deallocate stack */
-
-		.set	mips3
-		eret
-		.set	mips0
-#endif
-		.set	at
-		.set	reorder
-		END(trap_low)
-
-LEAF(kgdb_read_byte)
-4:		lb	t0, (a0)
-		sb	t0, (a1)
-		li	v0, 0
-		jr	ra
-		.section __ex_table,"a"
-		PTR	4b, kgdbfault
-		.previous
-		END(kgdb_read_byte)
-
-LEAF(kgdb_write_byte)
-5:		sb	a0, (a1)
-		li	v0, 0
-		jr	ra
-		.section __ex_table,"a"
-		PTR	5b, kgdbfault
-		.previous
-		END(kgdb_write_byte)
-
-		.type	kgdbfault@function
-		.ent	kgdbfault
-
-kgdbfault:	li	v0, -EFAULT
-		jr	ra
-		.end	kgdbfault
diff --git a/arch/mips/kernel/gdb-stub.c b/arch/mips/kernel/gdb-stub.c
deleted file mode 100644
index 25f4eab8ea9c..000000000000
--- a/arch/mips/kernel/gdb-stub.c
+++ /dev/null
@@ -1,1155 +0,0 @@
-/*
- *  arch/mips/kernel/gdb-stub.c
- *
- *  Originally written by Glenn Engel, Lake Stevens Instrument Division
- *
- *  Contributed by HP Systems
- *
- *  Modified for SPARC by Stu Grossman, Cygnus Support.
- *
- *  Modified for Linux/MIPS (and MIPS in general) by Andreas Busse
- *  Send complaints, suggestions etc. to <andy@waldorf-gmbh.de>
- *
- *  Copyright (C) 1995 Andreas Busse
- *
- *  Copyright (C) 2003 MontaVista Software Inc.
- *  Author: Jun Sun, jsun@mvista.com or jsun@junsun.net
- */
-
-/*
- *  To enable debugger support, two things need to happen.  One, a
- *  call to set_debug_traps() is necessary in order to allow any breakpoints
- *  or error conditions to be properly intercepted and reported to gdb.
- *  Two, a breakpoint needs to be generated to begin communication.  This
- *  is most easily accomplished by a call to breakpoint().  Breakpoint()
- *  simulates a breakpoint by executing a BREAK instruction.
- *
- *
- *    The following gdb commands are supported:
- *
- * command          function                               Return value
- *
- *    g             return the value of the CPU registers  hex data or ENN
- *    G             set the value of the CPU registers     OK or ENN
- *
- *    mAA..AA,LLLL  Read LLLL bytes at address AA..AA      hex data or ENN
- *    MAA..AA,LLLL: Write LLLL bytes at address AA.AA      OK or ENN
- *
- *    c             Resume at current address              SNN   ( signal NN)
- *    cAA..AA       Continue at address AA..AA             SNN
- *
- *    s             Step one instruction                   SNN
- *    sAA..AA       Step one instruction from AA..AA       SNN
- *
- *    k             kill
- *
- *    ?             What was the last sigval ?             SNN   (signal NN)
- *
- *    bBB..BB	    Set baud rate to BB..BB		   OK or BNN, then sets
- *							   baud rate
- *
- * All commands and responses are sent with a packet which includes a
- * checksum.  A packet consists of
- *
- * $<packet info>#<checksum>.
- *
- * where
- * <packet info> :: <characters representing the command or response>
- * <checksum>    :: < two hex digits computed as modulo 256 sum of <packetinfo>>
- *
- * When a packet is received, it is first acknowledged with either '+' or '-'.
- * '+' indicates a successful transfer.  '-' indicates a failed transfer.
- *
- * Example:
- *
- * Host:                  Reply:
- * $m0,10#2a               +$00010203040506070809101112131415#42
- *
- *
- *  ==============
- *  MORE EXAMPLES:
- *  ==============
- *
- *  For reference -- the following are the steps that one
- *  company took (RidgeRun Inc) to get remote gdb debugging
- *  going. In this scenario the host machine was a PC and the
- *  target platform was a Galileo EVB64120A MIPS evaluation
- *  board.
- *
- *  Step 1:
- *  First download gdb-5.0.tar.gz from the internet.
- *  and then build/install the package.
- *
- *  Example:
- *    $ tar zxf gdb-5.0.tar.gz
- *    $ cd gdb-5.0
- *    $ ./configure --target=mips-linux-elf
- *    $ make
- *    $ install
- *    $ which mips-linux-elf-gdb
- *    /usr/local/bin/mips-linux-elf-gdb
- *
- *  Step 2:
- *  Configure linux for remote debugging and build it.
- *
- *  Example:
- *    $ cd ~/linux
- *    $ make menuconfig <go to "Kernel Hacking" and turn on remote debugging>
- *    $ make
- *
- *  Step 3:
- *  Download the kernel to the remote target and start
- *  the kernel running. It will promptly halt and wait
- *  for the host gdb session to connect. It does this
- *  since the "Kernel Hacking" option has defined
- *  CONFIG_KGDB which in turn enables your calls
- *  to:
- *     set_debug_traps();
- *     breakpoint();
- *
- *  Step 4:
- *  Start the gdb session on the host.
- *
- *  Example:
- *    $ mips-linux-elf-gdb vmlinux
- *    (gdb) set remotebaud 115200
- *    (gdb) target remote /dev/ttyS1
- *    ...at this point you are connected to
- *       the remote target and can use gdb
- *       in the normal fasion. Setting
- *       breakpoints, single stepping,
- *       printing variables, etc.
- */
-#include <linux/string.h>
-#include <linux/kernel.h>
-#include <linux/signal.h>
-#include <linux/sched.h>
-#include <linux/mm.h>
-#include <linux/console.h>
-#include <linux/init.h>
-#include <linux/smp.h>
-#include <linux/spinlock.h>
-#include <linux/slab.h>
-#include <linux/reboot.h>
-
-#include <asm/asm.h>
-#include <asm/cacheflush.h>
-#include <asm/mipsregs.h>
-#include <asm/pgtable.h>
-#include <asm/system.h>
-#include <asm/gdb-stub.h>
-#include <asm/inst.h>
-
-/*
- * external low-level support routines
- */
-
-extern int putDebugChar(char c);    /* write a single character      */
-extern char getDebugChar(void);     /* read and return a single char */
-extern void trap_low(void);
-
-/*
- * breakpoint and test functions
- */
-extern void breakpoint(void);
-extern void breakinst(void);
-extern void async_breakpoint(void);
-extern void async_breakinst(void);
-extern void adel(void);
-
-/*
- * local prototypes
- */
-
-static void getpacket(char *buffer);
-static void putpacket(char *buffer);
-static int computeSignal(int tt);
-static int hex(unsigned char ch);
-static int hexToInt(char **ptr, int *intValue);
-static int hexToLong(char **ptr, long *longValue);
-static unsigned char *mem2hex(char *mem, char *buf, int count, int may_fault);
-void handle_exception(struct gdb_regs *regs);
-
-int kgdb_enabled;
-
-/*
- * spin locks for smp case
- */
-static DEFINE_SPINLOCK(kgdb_lock);
-static raw_spinlock_t kgdb_cpulock[NR_CPUS] = {
-	[0 ... NR_CPUS-1] = __RAW_SPIN_LOCK_UNLOCKED,
-};
-
-/*
- * BUFMAX defines the maximum number of characters in inbound/outbound buffers
- * at least NUMREGBYTES*2 are needed for register packets
- */
-#define BUFMAX 2048
-
-static char input_buffer[BUFMAX];
-static char output_buffer[BUFMAX];
-static int initialized;	/* !0 means we've been initialized */
-static int kgdb_started;
-static const char hexchars[]="0123456789abcdef";
-
-/* Used to prevent crashes in memory access.  Note that they'll crash anyway if
-   we haven't set up fault handlers yet... */
-int kgdb_read_byte(unsigned char *address, unsigned char *dest);
-int kgdb_write_byte(unsigned char val, unsigned char *dest);
-
-/*
- * Convert ch from a hex digit to an int
- */
-static int hex(unsigned char ch)
-{
-	if (ch >= 'a' && ch <= 'f')
-		return ch-'a'+10;
-	if (ch >= '0' && ch <= '9')
-		return ch-'0';
-	if (ch >= 'A' && ch <= 'F')
-		return ch-'A'+10;
-	return -1;
-}
-
-/*
- * scan for the sequence $<data>#<checksum>
- */
-static void getpacket(char *buffer)
-{
-	unsigned char checksum;
-	unsigned char xmitcsum;
-	int i;
-	int count;
-	unsigned char ch;
-
-	do {
-		/*
-		 * wait around for the start character,
-		 * ignore all other characters
-		 */
-		while ((ch = (getDebugChar() & 0x7f)) != '$') ;
-
-		checksum = 0;
-		xmitcsum = -1;
-		count = 0;
-
-		/*
-		 * now, read until a # or end of buffer is found
-		 */
-		while (count < BUFMAX) {
-			ch = getDebugChar();
-			if (ch == '#')
-				break;
-			checksum = checksum + ch;
-			buffer[count] = ch;
-			count = count + 1;
-		}
-
-		if (count >= BUFMAX)
-			continue;
-
-		buffer[count] = 0;
-
-		if (ch == '#') {
-			xmitcsum = hex(getDebugChar() & 0x7f) << 4;
-			xmitcsum |= hex(getDebugChar() & 0x7f);
-
-			if (checksum != xmitcsum)
-				putDebugChar('-');	/* failed checksum */
-			else {
-				putDebugChar('+'); /* successful transfer */
-
-				/*
-				 * if a sequence char is present,
-				 * reply the sequence ID
-				 */
-				if (buffer[2] == ':') {
-					putDebugChar(buffer[0]);
-					putDebugChar(buffer[1]);
-
-					/*
-					 * remove sequence chars from buffer
-					 */
-					count = strlen(buffer);
-					for (i=3; i <= count; i++)
-						buffer[i-3] = buffer[i];
-				}
-			}
-		}
-	}
-	while (checksum != xmitcsum);
-}
-
-/*
- * send the packet in buffer.
- */
-static void putpacket(char *buffer)
-{
-	unsigned char checksum;
-	int count;
-	unsigned char ch;
-
-	/*
-	 * $<packet info>#<checksum>.
-	 */
-
-	do {
-		putDebugChar('$');
-		checksum = 0;
-		count = 0;
-
-		while ((ch = buffer[count]) != 0) {
-			if (!(putDebugChar(ch)))
-				return;
-			checksum += ch;
-			count += 1;
-		}
-
-		putDebugChar('#');
-		putDebugChar(hexchars[checksum >> 4]);
-		putDebugChar(hexchars[checksum & 0xf]);
-
-	}
-	while ((getDebugChar() & 0x7f) != '+');
-}
-
-
-/*
- * Convert the memory pointed to by mem into hex, placing result in buf.
- * Return a pointer to the last char put in buf (null), in case of mem fault,
- * return 0.
- * may_fault is non-zero if we are reading from arbitrary memory, but is currently
- * not used.
- */
-static unsigned char *mem2hex(char *mem, char *buf, int count, int may_fault)
-{
-	unsigned char ch;
-
-	while (count-- > 0) {
-		if (kgdb_read_byte(mem++, &ch) != 0)
-			return 0;
-		*buf++ = hexchars[ch >> 4];
-		*buf++ = hexchars[ch & 0xf];
-	}
-
-	*buf = 0;
-
-	return buf;
-}
-
-/*
- * convert the hex array pointed to by buf into binary to be placed in mem
- * return a pointer to the character AFTER the last byte written
- * may_fault is non-zero if we are reading from arbitrary memory, but is currently
- * not used.
- */
-static char *hex2mem(char *buf, char *mem, int count, int binary, int may_fault)
-{
-	int i;
-	unsigned char ch;
-
-	for (i=0; i<count; i++)
-	{
-		if (binary) {
-			ch = *buf++;
-			if (ch == 0x7d)
-				ch = 0x20 ^ *buf++;
-		}
-		else {
-			ch = hex(*buf++) << 4;
-			ch |= hex(*buf++);
-		}
-		if (kgdb_write_byte(ch, mem++) != 0)
-			return 0;
-	}
-
-	return mem;
-}
-
-/*
- * This table contains the mapping between SPARC hardware trap types, and
- * signals, which are primarily what GDB understands.  It also indicates
- * which hardware traps we need to commandeer when initializing the stub.
- */
-static struct hard_trap_info {
-	unsigned char tt;		/* Trap type code for MIPS R3xxx and R4xxx */
-	unsigned char signo;		/* Signal that we map this trap into */
-} hard_trap_info[] = {
-	{ 6, SIGBUS },			/* instruction bus error */
-	{ 7, SIGBUS },			/* data bus error */
-	{ 9, SIGTRAP },			/* break */
-	{ 10, SIGILL },			/* reserved instruction */
-/*	{ 11, SIGILL },		*/	/* CPU unusable */
-	{ 12, SIGFPE },			/* overflow */
-	{ 13, SIGTRAP },		/* trap */
-	{ 14, SIGSEGV },		/* virtual instruction cache coherency */
-	{ 15, SIGFPE },			/* floating point exception */
-	{ 23, SIGSEGV },		/* watch */
-	{ 31, SIGSEGV },		/* virtual data cache coherency */
-	{ 0, 0}				/* Must be last */
-};
-
-/* Save the normal trap handlers for user-mode traps. */
-void *saved_vectors[32];
-
-/*
- * Set up exception handlers for tracing and breakpoints
- */
-void set_debug_traps(void)
-{
-	struct hard_trap_info *ht;
-	unsigned long flags;
-	unsigned char c;
-
-	local_irq_save(flags);
-	for (ht = hard_trap_info; ht->tt && ht->signo; ht++)
-		saved_vectors[ht->tt] = set_except_vector(ht->tt, trap_low);
-
-	putDebugChar('+'); /* 'hello world' */
-	/*
-	 * In case GDB is started before us, ack any packets
-	 * (presumably "$?#xx") sitting there.
-	 */
-	while((c = getDebugChar()) != '$');
-	while((c = getDebugChar()) != '#');
-	c = getDebugChar(); /* eat first csum byte */
-	c = getDebugChar(); /* eat second csum byte */
-	putDebugChar('+'); /* ack it */
-
-	initialized = 1;
-	local_irq_restore(flags);
-}
-
-void restore_debug_traps(void)
-{
-	struct hard_trap_info *ht;
-	unsigned long flags;
-
-	local_irq_save(flags);
-	for (ht = hard_trap_info; ht->tt && ht->signo; ht++)
-		set_except_vector(ht->tt, saved_vectors[ht->tt]);
-	local_irq_restore(flags);
-}
-
-/*
- * Convert the MIPS hardware trap type code to a Unix signal number.
- */
-static int computeSignal(int tt)
-{
-	struct hard_trap_info *ht;
-
-	for (ht = hard_trap_info; ht->tt && ht->signo; ht++)
-		if (ht->tt == tt)
-			return ht->signo;
-
-	return SIGHUP;		/* default for things we don't know about */
-}
-
-/*
- * While we find nice hex chars, build an int.
- * Return number of chars processed.
- */
-static int hexToInt(char **ptr, int *intValue)
-{
-	int numChars = 0;
-	int hexValue;
-
-	*intValue = 0;
-
-	while (**ptr) {
-		hexValue = hex(**ptr);
-		if (hexValue < 0)
-			break;
-
-		*intValue = (*intValue << 4) | hexValue;
-		numChars ++;
-
-		(*ptr)++;
-	}
-
-	return (numChars);
-}
-
-static int hexToLong(char **ptr, long *longValue)
-{
-	int numChars = 0;
-	int hexValue;
-
-	*longValue = 0;
-
-	while (**ptr) {
-		hexValue = hex(**ptr);
-		if (hexValue < 0)
-			break;
-
-		*longValue = (*longValue << 4) | hexValue;
-		numChars ++;
-
-		(*ptr)++;
-	}
-
-	return numChars;
-}
-
-
-#if 0
-/*
- * Print registers (on target console)
- * Used only to debug the stub...
- */
-void show_gdbregs(struct gdb_regs * regs)
-{
-	/*
-	 * Saved main processor registers
-	 */
-	printk("$0 : %08lx %08lx %08lx %08lx %08lx %08lx %08lx %08lx\n",
-	       regs->reg0, regs->reg1, regs->reg2, regs->reg3,
-	       regs->reg4, regs->reg5, regs->reg6, regs->reg7);
-	printk("$8 : %08lx %08lx %08lx %08lx %08lx %08lx %08lx %08lx\n",
-	       regs->reg8, regs->reg9, regs->reg10, regs->reg11,
-	       regs->reg12, regs->reg13, regs->reg14, regs->reg15);
-	printk("$16: %08lx %08lx %08lx %08lx %08lx %08lx %08lx %08lx\n",
-	       regs->reg16, regs->reg17, regs->reg18, regs->reg19,
-	       regs->reg20, regs->reg21, regs->reg22, regs->reg23);
-	printk("$24: %08lx %08lx %08lx %08lx %08lx %08lx %08lx %08lx\n",
-	       regs->reg24, regs->reg25, regs->reg26, regs->reg27,
-	       regs->reg28, regs->reg29, regs->reg30, regs->reg31);
-
-	/*
-	 * Saved cp0 registers
-	 */
-	printk("epc  : %08lx\nStatus: %08lx\nCause : %08lx\n",
-	       regs->cp0_epc, regs->cp0_status, regs->cp0_cause);
-}
-#endif /* dead code */
-
-/*
- * We single-step by setting breakpoints. When an exception
- * is handled, we need to restore the instructions hoisted
- * when the breakpoints were set.
- *
- * This is where we save the original instructions.
- */
-static struct gdb_bp_save {
-	unsigned long addr;
-	unsigned int val;
-} step_bp[2];
-
-#define BP 0x0000000d  /* break opcode */
-
-/*
- * Set breakpoint instructions for single stepping.
- */
-static void single_step(struct gdb_regs *regs)
-{
-	union mips_instruction insn;
-	unsigned long targ;
-	int is_branch, is_cond, i;
-
-	targ = regs->cp0_epc;
-	insn.word = *(unsigned int *)targ;
-	is_branch = is_cond = 0;
-
-	switch (insn.i_format.opcode) {
-	/*
-	 * jr and jalr are in r_format format.
-	 */
-	case spec_op:
-		switch (insn.r_format.func) {
-		case jalr_op:
-		case jr_op:
-			targ = *(&regs->reg0 + insn.r_format.rs);
-			is_branch = 1;
-			break;
-		}
-		break;
-
-	/*
-	 * This group contains:
-	 * bltz_op, bgez_op, bltzl_op, bgezl_op,
-	 * bltzal_op, bgezal_op, bltzall_op, bgezall_op.
-	 */
-	case bcond_op:
-		is_branch = is_cond = 1;
-		targ += 4 + (insn.i_format.simmediate << 2);
-		break;
-
-	/*
-	 * These are unconditional and in j_format.
-	 */
-	case jal_op:
-	case j_op:
-		is_branch = 1;
-		targ += 4;
-		targ >>= 28;
-		targ <<= 28;
-		targ |= (insn.j_format.target << 2);
-		break;
-
-	/*
-	 * These are conditional.
-	 */
-	case beq_op:
-	case beql_op:
-	case bne_op:
-	case bnel_op:
-	case blez_op:
-	case blezl_op:
-	case bgtz_op:
-	case bgtzl_op:
-	case cop0_op:
-	case cop1_op:
-	case cop2_op:
-	case cop1x_op:
-		is_branch = is_cond = 1;
-		targ += 4 + (insn.i_format.simmediate << 2);
-		break;
-	}
-
-	if (is_branch) {
-		i = 0;
-		if (is_cond && targ != (regs->cp0_epc + 8)) {
-			step_bp[i].addr = regs->cp0_epc + 8;
-			step_bp[i++].val = *(unsigned *)(regs->cp0_epc + 8);
-			*(unsigned *)(regs->cp0_epc + 8) = BP;
-		}
-		step_bp[i].addr = targ;
-		step_bp[i].val  = *(unsigned *)targ;
-		*(unsigned *)targ = BP;
-	} else {
-		step_bp[0].addr = regs->cp0_epc + 4;
-		step_bp[0].val  = *(unsigned *)(regs->cp0_epc + 4);
-		*(unsigned *)(regs->cp0_epc + 4) = BP;
-	}
-}
-
-/*
- *  If asynchronously interrupted by gdb, then we need to set a breakpoint
- *  at the interrupted instruction so that we wind up stopped with a
- *  reasonable stack frame.
- */
-static struct gdb_bp_save async_bp;
-
-/*
- * Swap the interrupted EPC with our asynchronous breakpoint routine.
- * This is safer than stuffing the breakpoint in-place, since no cache
- * flushes (or resulting smp_call_functions) are required.  The
- * assumption is that only one CPU will be handling asynchronous bp's,
- * and only one can be active at a time.
- */
-extern spinlock_t smp_call_lock;
-
-void set_async_breakpoint(unsigned long *epc)
-{
-	/* skip breaking into userland */
-	if ((*epc & 0x80000000) == 0)
-		return;
-
-#ifdef CONFIG_SMP
-	/* avoid deadlock if someone is make IPC */
-	if (spin_is_locked(&smp_call_lock))
-		return;
-#endif
-
-	async_bp.addr = *epc;
-	*epc = (unsigned long)async_breakpoint;
-}
-
-#ifdef CONFIG_SMP
-static void kgdb_wait(void *arg)
-{
-	unsigned flags;
-	int cpu = smp_processor_id();
-
-	local_irq_save(flags);
-
-	__raw_spin_lock(&kgdb_cpulock[cpu]);
-	__raw_spin_unlock(&kgdb_cpulock[cpu]);
-
-	local_irq_restore(flags);
-}
-#endif
-
-/*
- * GDB stub needs to call kgdb_wait on all processor with interrupts
- * disabled, so it uses it's own special variant.
- */
-static int kgdb_smp_call_kgdb_wait(void)
-{
-#ifdef CONFIG_SMP
-	cpumask_t mask = cpu_online_map;
-	struct call_data_struct data;
-	int cpu = smp_processor_id();
-	int cpus;
-
-	/*
-	 * Can die spectacularly if this CPU isn't yet marked online
-	 */
-	BUG_ON(!cpu_online(cpu));
-
-	cpu_clear(cpu, mask);
-	cpus = cpus_weight(mask);
-	if (!cpus)
-		return 0;
-
-	if (spin_is_locked(&smp_call_lock)) {
-		/*
-		 * Some other processor is trying to make us do something
-		 * but we're not going to respond... give up
-		 */
-		return -1;
-		}
-
-	/*
-	 * We will continue here, accepting the fact that
-	 * the kernel may deadlock if another CPU attempts
-	 * to call smp_call_function now...
-	 */
-
-	data.func = kgdb_wait;
-	data.info = NULL;
-	atomic_set(&data.started, 0);
-	data.wait = 0;
-
-	spin_lock(&smp_call_lock);
-	call_data = &data;
-	mb();
-
-	core_send_ipi_mask(mask, SMP_CALL_FUNCTION);
-
-	/* Wait for response */
-	/* FIXME: lock-up detection, backtrace on lock-up */
-	while (atomic_read(&data.started) != cpus)
-		barrier();
-
-	call_data = NULL;
-	spin_unlock(&smp_call_lock);
-#endif
-
-	return 0;
-}
-
-/*
- * This function does all command processing for interfacing to gdb.  It
- * returns 1 if you should skip the instruction at the trap address, 0
- * otherwise.
- */
-void handle_exception(struct gdb_regs *regs)
-{
-	int trap;			/* Trap type */
-	int sigval;
-	long addr;
-	int length;
-	char *ptr;
-	unsigned long *stack;
-	int i;
-	int bflag = 0;
-
-	kgdb_started = 1;
-
-	/*
-	 * acquire the big kgdb spinlock
-	 */
-	if (!spin_trylock(&kgdb_lock)) {
-		/*
-		 * some other CPU has the lock, we should go back to
-		 * receive the gdb_wait IPC
-		 */
-		return;
-	}
-
-	/*
-	 * If we're in async_breakpoint(), restore the real EPC from
-	 * the breakpoint.
-	 */
-	if (regs->cp0_epc == (unsigned long)async_breakinst) {
-		regs->cp0_epc = async_bp.addr;
-		async_bp.addr = 0;
-	}
-
-	/*
-	 * acquire the CPU spinlocks
-	 */
-	for_each_online_cpu(i)
-		if (__raw_spin_trylock(&kgdb_cpulock[i]) == 0)
-			panic("kgdb: couldn't get cpulock %d\n", i);
-
-	/*
-	 * force other cpus to enter kgdb
-	 */
-	kgdb_smp_call_kgdb_wait();
-
-	/*
-	 * If we're in breakpoint() increment the PC
-	 */
-	trap = (regs->cp0_cause & 0x7c) >> 2;
-	if (trap == 9 && regs->cp0_epc == (unsigned long)breakinst)
-		regs->cp0_epc += 4;
-
-	/*
-	 * If we were single_stepping, restore the opcodes hoisted
-	 * for the breakpoint[s].
-	 */
-	if (step_bp[0].addr) {
-		*(unsigned *)step_bp[0].addr = step_bp[0].val;
-		step_bp[0].addr = 0;
-
-		if (step_bp[1].addr) {
-			*(unsigned *)step_bp[1].addr = step_bp[1].val;
-			step_bp[1].addr = 0;
-		}
-	}
-
-	stack = (long *)regs->reg29;			/* stack ptr */
-	sigval = computeSignal(trap);
-
-	/*
-	 * reply to host that an exception has occurred
-	 */
-	ptr = output_buffer;
-
-	/*
-	 * Send trap type (converted to signal)
-	 */
-	*ptr++ = 'T';
-	*ptr++ = hexchars[sigval >> 4];
-	*ptr++ = hexchars[sigval & 0xf];
-
-	/*
-	 * Send Error PC
-	 */
-	*ptr++ = hexchars[REG_EPC >> 4];
-	*ptr++ = hexchars[REG_EPC & 0xf];
-	*ptr++ = ':';
-	ptr = mem2hex((char *)&regs->cp0_epc, ptr, sizeof(long), 0);
-	*ptr++ = ';';
-
-	/*
-	 * Send frame pointer
-	 */
-	*ptr++ = hexchars[REG_FP >> 4];
-	*ptr++ = hexchars[REG_FP & 0xf];
-	*ptr++ = ':';
-	ptr = mem2hex((char *)&regs->reg30, ptr, sizeof(long), 0);
-	*ptr++ = ';';
-
-	/*
-	 * Send stack pointer
-	 */
-	*ptr++ = hexchars[REG_SP >> 4];
-	*ptr++ = hexchars[REG_SP & 0xf];
-	*ptr++ = ':';
-	ptr = mem2hex((char *)&regs->reg29, ptr, sizeof(long), 0);
-	*ptr++ = ';';
-
-	*ptr++ = 0;
-	putpacket(output_buffer);	/* send it off... */
-
-	/*
-	 * Wait for input from remote GDB
-	 */
-	while (1) {
-		output_buffer[0] = 0;
-		getpacket(input_buffer);
-
-		switch (input_buffer[0])
-		{
-		case '?':
-			output_buffer[0] = 'S';
-			output_buffer[1] = hexchars[sigval >> 4];
-			output_buffer[2] = hexchars[sigval & 0xf];
-			output_buffer[3] = 0;
-			break;
-
-		/*
-		 * Detach debugger; let CPU run
-		 */
-		case 'D':
-			putpacket(output_buffer);
-			goto finish_kgdb;
-			break;
-
-		case 'd':
-			/* toggle debug flag */
-			break;
-
-		/*
-		 * Return the value of the CPU registers
-		 */
-		case 'g':
-			ptr = output_buffer;
-			ptr = mem2hex((char *)&regs->reg0, ptr, 32*sizeof(long), 0); /* r0...r31 */
-			ptr = mem2hex((char *)&regs->cp0_status, ptr, 6*sizeof(long), 0); /* cp0 */
-			ptr = mem2hex((char *)&regs->fpr0, ptr, 32*sizeof(long), 0); /* f0...31 */
-			ptr = mem2hex((char *)&regs->cp1_fsr, ptr, 2*sizeof(long), 0); /* cp1 */
-			ptr = mem2hex((char *)&regs->frame_ptr, ptr, 2*sizeof(long), 0); /* frp */
-			ptr = mem2hex((char *)&regs->cp0_index, ptr, 16*sizeof(long), 0); /* cp0 */
-			break;
-
-		/*
-		 * set the value of the CPU registers - return OK
-		 */
-		case 'G':
-		{
-			ptr = &input_buffer[1];
-			hex2mem(ptr, (char *)&regs->reg0, 32*sizeof(long), 0, 0);
-			ptr += 32*(2*sizeof(long));
-			hex2mem(ptr, (char *)&regs->cp0_status, 6*sizeof(long), 0, 0);
-			ptr += 6*(2*sizeof(long));
-			hex2mem(ptr, (char *)&regs->fpr0, 32*sizeof(long), 0, 0);
-			ptr += 32*(2*sizeof(long));
-			hex2mem(ptr, (char *)&regs->cp1_fsr, 2*sizeof(long), 0, 0);
-			ptr += 2*(2*sizeof(long));
-			hex2mem(ptr, (char *)&regs->frame_ptr, 2*sizeof(long), 0, 0);
-			ptr += 2*(2*sizeof(long));
-			hex2mem(ptr, (char *)&regs->cp0_index, 16*sizeof(long), 0, 0);
-			strcpy(output_buffer, "OK");
-		 }
-		break;
-
-		/*
-		 * mAA..AA,LLLL  Read LLLL bytes at address AA..AA
-		 */
-		case 'm':
-			ptr = &input_buffer[1];
-
-			if (hexToLong(&ptr, &addr)
-				&& *ptr++ == ','
-				&& hexToInt(&ptr, &length)) {
-				if (mem2hex((char *)addr, output_buffer, length, 1))
-					break;
-				strcpy(output_buffer, "E03");
-			} else
-				strcpy(output_buffer, "E01");
-			break;
-
-		/*
-		 * XAA..AA,LLLL: Write LLLL escaped binary bytes at address AA.AA
-		 */
-		case 'X':
-			bflag = 1;
-			/* fall through */
-
-		/*
-		 * MAA..AA,LLLL: Write LLLL bytes at address AA.AA return OK
-		 */
-		case 'M':
-			ptr = &input_buffer[1];
-
-			if (hexToLong(&ptr, &addr)
-				&& *ptr++ == ','
-				&& hexToInt(&ptr, &length)
-				&& *ptr++ == ':') {
-				if (hex2mem(ptr, (char *)addr, length, bflag, 1))
-					strcpy(output_buffer, "OK");
-				else
-					strcpy(output_buffer, "E03");
-			}
-			else
-				strcpy(output_buffer, "E02");
-			break;
-
-		/*
-		 * cAA..AA    Continue at address AA..AA(optional)
-		 */
-		case 'c':
-			/* try to read optional parameter, pc unchanged if no parm */
-
-			ptr = &input_buffer[1];
-			if (hexToLong(&ptr, &addr))
-				regs->cp0_epc = addr;
-
-			goto exit_kgdb_exception;
-			break;
-
-		/*
-		 * kill the program; let us try to restart the machine
-		 * Reset the whole machine.
-		 */
-		case 'k':
-		case 'r':
-			machine_restart("kgdb restarts machine");
-			break;
-
-		/*
-		 * Step to next instruction
-		 */
-		case 's':
-			/*
-			 * There is no single step insn in the MIPS ISA, so we
-			 * use breakpoints and continue, instead.
-			 */
-			single_step(regs);
-			goto exit_kgdb_exception;
-			/* NOTREACHED */
-			break;
-
-		/*
-		 * Set baud rate (bBB)
-		 * FIXME: Needs to be written
-		 */
-		case 'b':
-		{
-#if 0
-			int baudrate;
-			extern void set_timer_3();
-
-			ptr = &input_buffer[1];
-			if (!hexToInt(&ptr, &baudrate))
-			{
-				strcpy(output_buffer, "B01");
-				break;
-			}
-
-			/* Convert baud rate to uart clock divider */
-
-			switch (baudrate)
-			{
-				case 38400:
-					baudrate = 16;
-					break;
-				case 19200:
-					baudrate = 33;
-					break;
-				case 9600:
-					baudrate = 65;
-					break;
-				default:
-					baudrate = 0;
-					strcpy(output_buffer, "B02");
-					goto x1;
-			}
-
-			if (baudrate) {
-				putpacket("OK");	/* Ack before changing speed */
-				set_timer_3(baudrate); /* Set it */
-			}
-#endif
-		}
-		break;
-
-		}			/* switch */
-
-		/*
-		 * reply to the request
-		 */
-
-		putpacket(output_buffer);
-
-	} /* while */
-
-	return;
-
-finish_kgdb:
-	restore_debug_traps();
-
-exit_kgdb_exception:
-	/* release locks so other CPUs can go */
-	for_each_online_cpu(i)
-		__raw_spin_unlock(&kgdb_cpulock[i]);
-	spin_unlock(&kgdb_lock);
-
-	__flush_cache_all();
-	return;
-}
-
-/*
- * This function will generate a breakpoint exception.  It is used at the
- * beginning of a program to sync up with a debugger and can be used
- * otherwise as a quick means to stop program execution and "break" into
- * the debugger.
- */
-void breakpoint(void)
-{
-	if (!initialized)
-		return;
-
-	__asm__ __volatile__(
-			".globl	breakinst\n\t"
-			".set\tnoreorder\n\t"
-			"nop\n"
-			"breakinst:\tbreak\n\t"
-			"nop\n\t"
-			".set\treorder"
-			);
-}
-
-/* Nothing but the break; don't pollute any registers */
-void async_breakpoint(void)
-{
-	__asm__ __volatile__(
-			".globl	async_breakinst\n\t"
-			".set\tnoreorder\n\t"
-			"nop\n"
-			"async_breakinst:\tbreak\n\t"
-			"nop\n\t"
-			".set\treorder"
-			);
-}
-
-void adel(void)
-{
-	__asm__ __volatile__(
-			".globl\tadel\n\t"
-			"lui\t$8,0x8000\n\t"
-			"lw\t$9,1($8)\n\t"
-			);
-}
-
-/*
- * malloc is needed by gdb client in "call func()", even a private one
- * will make gdb happy
- */
-static void __used *malloc(size_t size)
-{
-	return kmalloc(size, GFP_ATOMIC);
-}
-
-static void __used free(void *where)
-{
-	kfree(where);
-}
-
-#ifdef CONFIG_GDB_CONSOLE
-
-void gdb_putsn(const char *str, int l)
-{
-	char outbuf[18];
-
-	if (!kgdb_started)
-		return;
-
-	outbuf[0]='O';
-
-	while(l) {
-		int i = (l>8)?8:l;
-		mem2hex((char *)str, &outbuf[1], i, 0);
-		outbuf[(i*2)+1]=0;
-		putpacket(outbuf);
-		str += i;
-		l -= i;
-	}
-}
-
-static void gdb_console_write(struct console *con, const char *s, unsigned n)
-{
-	gdb_putsn(s, n);
-}
-
-static struct console gdb_console = {
-	.name	= "gdb",
-	.write	= gdb_console_write,
-	.flags	= CON_PRINTBUFFER,
-	.index	= -1
-};
-
-static int __init register_gdb_console(void)
-{
-	register_console(&gdb_console);
-
-	return 0;
-}
-
-console_initcall(register_gdb_console);
-
-#endif
diff --git a/arch/mips/kernel/irq.c b/arch/mips/kernel/irq.c
index 6045b9a51a35..4b4007b3083a 100644
--- a/arch/mips/kernel/irq.c
+++ b/arch/mips/kernel/irq.c
@@ -21,11 +21,16 @@
 #include <linux/sched.h>
 #include <linux/seq_file.h>
 #include <linux/kallsyms.h>
+#include <linux/kgdb.h>
 
 #include <asm/atomic.h>
 #include <asm/system.h>
 #include <asm/uaccess.h>
 
+#ifdef CONFIG_KGDB
+int kgdb_early_setup;
+#endif
+
 static unsigned long irq_map[NR_IRQS / BITS_PER_LONG];
 
 int allocate_irqno(void)
@@ -126,33 +131,22 @@ asmlinkage void spurious_interrupt(void)
 	atomic_inc(&irq_err_count);
 }
 
-#ifdef CONFIG_KGDB
-extern void breakpoint(void);
-extern void set_debug_traps(void);
-
-static int kgdb_flag = 1;
-static int __init nokgdb(char *str)
-{
-	kgdb_flag = 0;
-	return 1;
-}
-__setup("nokgdb", nokgdb);
-#endif
-
 void __init init_IRQ(void)
 {
 	int i;
 
+#ifdef CONFIG_KGDB
+	if (kgdb_early_setup)
+		return;
+#endif
+
 	for (i = 0; i < NR_IRQS; i++)
 		set_irq_noprobe(i);
 
 	arch_init_irq();
 
 #ifdef CONFIG_KGDB
-	if (kgdb_flag) {
-		printk("Wait for gdb client connection ...\n");
-		set_debug_traps();
-		breakpoint();
-	}
+	if (!kgdb_early_setup)
+		kgdb_early_setup = 1;
 #endif
 }
diff --git a/arch/mips/kernel/kgdb.c b/arch/mips/kernel/kgdb.c
new file mode 100644
index 000000000000..8f6d58ede33c
--- /dev/null
+++ b/arch/mips/kernel/kgdb.c
@@ -0,0 +1,278 @@
+/*
+ *  Originally written by Glenn Engel, Lake Stevens Instrument Division
+ *
+ *  Contributed by HP Systems
+ *
+ *  Modified for Linux/MIPS (and MIPS in general) by Andreas Busse
+ *  Send complaints, suggestions etc. to <andy@waldorf-gmbh.de>
+ *
+ *  Copyright (C) 1995 Andreas Busse
+ *
+ *  Copyright (C) 2003 MontaVista Software Inc.
+ *  Author: Jun Sun, jsun@mvista.com or jsun@junsun.net
+ *
+ *  Copyright (C) 2004-2005 MontaVista Software Inc.
+ *  Author: Manish Lachwani, mlachwani@mvista.com or manish@koffee-break.com
+ *
+ *  Copyright (C) 2007-2008 Wind River Systems, Inc.
+ *  Author/Maintainer: Jason Wessel, jason.wessel@windriver.com
+ *
+ *  This file is licensed under the terms of the GNU General Public License
+ *  version 2. This program is licensed "as is" without any warranty of any
+ *  kind, whether express or implied.
+ */
+
+#include <linux/ptrace.h>		/* for linux pt_regs struct */
+#include <linux/kgdb.h>
+#include <linux/kdebug.h>
+#include <linux/sched.h>
+#include <asm/inst.h>
+#include <asm/fpu.h>
+#include <asm/cacheflush.h>
+#include <asm/processor.h>
+#include <asm/sigcontext.h>
+
+static struct hard_trap_info {
+	unsigned char tt;	/* Trap type code for MIPS R3xxx and R4xxx */
+	unsigned char signo;	/* Signal that we map this trap into */
+} hard_trap_info[] = {
+	{ 6, SIGBUS },		/* instruction bus error */
+	{ 7, SIGBUS },		/* data bus error */
+	{ 9, SIGTRAP },		/* break */
+/*	{ 11, SIGILL },	*/	/* CPU unusable */
+	{ 12, SIGFPE },		/* overflow */
+	{ 13, SIGTRAP },	/* trap */
+	{ 14, SIGSEGV },	/* virtual instruction cache coherency */
+	{ 15, SIGFPE },		/* floating point exception */
+	{ 23, SIGSEGV },	/* watch */
+	{ 31, SIGSEGV },	/* virtual data cache coherency */
+	{ 0, 0}			/* Must be last */
+};
+
+void arch_kgdb_breakpoint(void)
+{
+	__asm__ __volatile__(
+		".globl breakinst\n\t"
+		".set\tnoreorder\n\t"
+		"nop\n"
+		"breakinst:\tbreak\n\t"
+		"nop\n\t"
+		".set\treorder");
+}
+
+static void kgdb_call_nmi_hook(void *ignored)
+{
+	kgdb_nmicallback(raw_smp_processor_id(), NULL);
+}
+
+void kgdb_roundup_cpus(unsigned long flags)
+{
+	local_irq_enable();
+	smp_call_function(kgdb_call_nmi_hook, NULL, 0);
+	local_irq_disable();
+}
+
+static int compute_signal(int tt)
+{
+	struct hard_trap_info *ht;
+
+	for (ht = hard_trap_info; ht->tt && ht->signo; ht++)
+		if (ht->tt == tt)
+			return ht->signo;
+
+	return SIGHUP;		/* default for things we don't know about */
+}
+
+void pt_regs_to_gdb_regs(unsigned long *gdb_regs, struct pt_regs *regs)
+{
+	int reg;
+
+#if (KGDB_GDB_REG_SIZE == 32)
+	u32 *ptr = (u32 *)gdb_regs;
+#else
+	u64 *ptr = (u64 *)gdb_regs;
+#endif
+
+	for (reg = 0; reg < 32; reg++)
+		*(ptr++) = regs->regs[reg];
+
+	*(ptr++) = regs->cp0_status;
+	*(ptr++) = regs->lo;
+	*(ptr++) = regs->hi;
+	*(ptr++) = regs->cp0_badvaddr;
+	*(ptr++) = regs->cp0_cause;
+	*(ptr++) = regs->cp0_epc;
+
+	/* FP REGS */
+	if (!(current && (regs->cp0_status & ST0_CU1)))
+		return;
+
+	save_fp(current);
+	for (reg = 0; reg < 32; reg++)
+		*(ptr++) = current->thread.fpu.fpr[reg];
+}
+
+void gdb_regs_to_pt_regs(unsigned long *gdb_regs, struct pt_regs *regs)
+{
+	int reg;
+
+#if (KGDB_GDB_REG_SIZE == 32)
+	const u32 *ptr = (u32 *)gdb_regs;
+#else
+	const u64 *ptr = (u64 *)gdb_regs;
+#endif
+
+	for (reg = 0; reg < 32; reg++)
+		regs->regs[reg] = *(ptr++);
+
+	regs->cp0_status = *(ptr++);
+	regs->lo = *(ptr++);
+	regs->hi = *(ptr++);
+	regs->cp0_badvaddr = *(ptr++);
+	regs->cp0_cause = *(ptr++);
+	regs->cp0_epc = *(ptr++);
+
+	/* FP REGS from current */
+	if (!(current && (regs->cp0_status & ST0_CU1)))
+		return;
+
+	for (reg = 0; reg < 32; reg++)
+		current->thread.fpu.fpr[reg] = *(ptr++);
+	restore_fp(current);
+}
+
+/*
+ * Similar to regs_to_gdb_regs() except that process is sleeping and so
+ * we may not be able to get all the info.
+ */
+void sleeping_thread_to_gdb_regs(unsigned long *gdb_regs, struct task_struct *p)
+{
+	int reg;
+	struct thread_info *ti = task_thread_info(p);
+	unsigned long ksp = (unsigned long)ti + THREAD_SIZE - 32;
+	struct pt_regs *regs = (struct pt_regs *)ksp - 1;
+#if (KGDB_GDB_REG_SIZE == 32)
+	u32 *ptr = (u32 *)gdb_regs;
+#else
+	u64 *ptr = (u64 *)gdb_regs;
+#endif
+
+	for (reg = 0; reg < 16; reg++)
+		*(ptr++) = regs->regs[reg];
+
+	/* S0 - S7 */
+	for (reg = 16; reg < 24; reg++)
+		*(ptr++) = regs->regs[reg];
+
+	for (reg = 24; reg < 28; reg++)
+		*(ptr++) = 0;
+
+	/* GP, SP, FP, RA */
+	for (reg = 28; reg < 32; reg++)
+		*(ptr++) = regs->regs[reg];
+
+	*(ptr++) = regs->cp0_status;
+	*(ptr++) = regs->lo;
+	*(ptr++) = regs->hi;
+	*(ptr++) = regs->cp0_badvaddr;
+	*(ptr++) = regs->cp0_cause;
+	*(ptr++) = regs->cp0_epc;
+}
+
+/*
+ * Calls linux_debug_hook before the kernel dies. If KGDB is enabled,
+ * then try to fall into the debugger
+ */
+static int kgdb_mips_notify(struct notifier_block *self, unsigned long cmd,
+			    void *ptr)
+{
+	struct die_args *args = (struct die_args *)ptr;
+	struct pt_regs *regs = args->regs;
+	int trap = (regs->cp0_cause & 0x7c) >> 2;
+
+	/* Userpace events, ignore. */
+	if (user_mode(regs))
+		return NOTIFY_DONE;
+
+	if (atomic_read(&kgdb_active) != -1)
+		kgdb_nmicallback(smp_processor_id(), regs);
+
+	if (kgdb_handle_exception(trap, compute_signal(trap), 0, regs))
+		return NOTIFY_DONE;
+
+	if (atomic_read(&kgdb_setting_breakpoint))
+		if ((trap == 9) && (regs->cp0_epc == (unsigned long)breakinst))
+			regs->cp0_epc += 4;
+
+	/* In SMP mode, __flush_cache_all does IPI */
+	local_irq_enable();
+	__flush_cache_all();
+
+	return NOTIFY_STOP;
+}
+
+static struct notifier_block kgdb_notifier = {
+	.notifier_call = kgdb_mips_notify,
+};
+
+/*
+ * Handle the 's' and 'c' commands
+ */
+int kgdb_arch_handle_exception(int vector, int signo, int err_code,
+			       char *remcom_in_buffer, char *remcom_out_buffer,
+			       struct pt_regs *regs)
+{
+	char *ptr;
+	unsigned long address;
+	int cpu = smp_processor_id();
+
+	switch (remcom_in_buffer[0]) {
+	case 's':
+	case 'c':
+		/* handle the optional parameter */
+		ptr = &remcom_in_buffer[1];
+		if (kgdb_hex2long(&ptr, &address))
+			regs->cp0_epc = address;
+
+		atomic_set(&kgdb_cpu_doing_single_step, -1);
+		if (remcom_in_buffer[0] == 's')
+			if (kgdb_contthread)
+				atomic_set(&kgdb_cpu_doing_single_step, cpu);
+
+		return 0;
+	}
+
+	return -1;
+}
+
+struct kgdb_arch arch_kgdb_ops;
+
+/*
+ * We use kgdb_early_setup so that functions we need to call now don't
+ * cause trouble when called again later.
+ */
+int kgdb_arch_init(void)
+{
+	union mips_instruction insn = {
+		.r_format = {
+			.opcode = spec_op,
+			.func   = break_op,
+		}
+	};
+	memcpy(arch_kgdb_ops.gdb_bpt_instr, insn.byte, BREAK_INSTR_SIZE);
+
+	register_die_notifier(&kgdb_notifier);
+
+	return 0;
+}
+
+/*
+ *	kgdb_arch_exit - Perform any architecture specific uninitalization.
+ *
+ *	This function will handle the uninitalization of any architecture
+ *	specific callbacks, for dynamic registration and unregistration.
+ */
+void kgdb_arch_exit(void)
+{
+	unregister_die_notifier(&kgdb_notifier);
+}
diff --git a/arch/mips/kernel/linux32.c b/arch/mips/kernel/linux32.c
index c266211ed653..2fefb14414b7 100644
--- a/arch/mips/kernel/linux32.c
+++ b/arch/mips/kernel/linux32.c
@@ -11,7 +11,6 @@
 #include <linux/file.h>
 #include <linux/smp_lock.h>
 #include <linux/highuid.h>
-#include <linux/dirent.h>
 #include <linux/resource.h>
 #include <linux/highmem.h>
 #include <linux/time.h>
diff --git a/arch/mips/kernel/scall32-o32.S b/arch/mips/kernel/scall32-o32.S
index fc4fd4d705e2..5e75a316f6b1 100644
--- a/arch/mips/kernel/scall32-o32.S
+++ b/arch/mips/kernel/scall32-o32.S
@@ -647,6 +647,12 @@ einval:	li	v0, -EINVAL
 	sys	sys_timerfd_create	2
 	sys	sys_timerfd_gettime	2
 	sys	sys_timerfd_settime	4
+	sys	sys_signalfd4		4
+	sys	sys_eventfd2		2	/* 4325 */
+	sys	sys_epoll_create1	1
+	sys	sys_dup3		3
+	sys	sys_pipe2		2
+	sys	sys_inotify_init1	1
 	.endm
 
 	/* We pre-compute the number of _instruction_ bytes needed to
diff --git a/arch/mips/kernel/scall64-64.S b/arch/mips/kernel/scall64-64.S
index 2b73fd1e4528..3d58204c9d44 100644
--- a/arch/mips/kernel/scall64-64.S
+++ b/arch/mips/kernel/scall64-64.S
@@ -481,4 +481,10 @@ sys_call_table:
 	PTR	sys_timerfd_create		/* 5280 */
 	PTR	sys_timerfd_gettime
 	PTR	sys_timerfd_settime
+	PTR	sys_signalfd4
+	PTR	sys_eventfd2
+	PTR	sys_epoll_create1		/* 5285 */
+	PTR	sys_dup3
+	PTR	sys_pipe2
+	PTR	sys_inotify_init1
 	.size	sys_call_table,.-sys_call_table
diff --git a/arch/mips/kernel/scall64-n32.S b/arch/mips/kernel/scall64-n32.S
index 2654e75d2fef..da7f1b6ea0fb 100644
--- a/arch/mips/kernel/scall64-n32.S
+++ b/arch/mips/kernel/scall64-n32.S
@@ -407,4 +407,10 @@ EXPORT(sysn32_call_table)
 	PTR	sys_timerfd_create
 	PTR	sys_timerfd_gettime		/* 5285 */
 	PTR	sys_timerfd_settime
+	PTR	sys_signalfd4
+	PTR	sys_eventfd2
+	PTR	sys_epoll_create1
+	PTR	sys_dup3			/* 5290 */
+	PTR	sys_pipe2
+	PTR	sys_inotify_init1
 	.size	sysn32_call_table,.-sysn32_call_table
diff --git a/arch/mips/kernel/scall64-o32.S b/arch/mips/kernel/scall64-o32.S
index 76167bea5a70..d7cd1aac9ada 100644
--- a/arch/mips/kernel/scall64-o32.S
+++ b/arch/mips/kernel/scall64-o32.S
@@ -529,4 +529,10 @@ sys_call_table:
 	PTR	sys_timerfd_create
 	PTR	sys_timerfd_gettime
 	PTR	sys_timerfd_settime
+	PTR	compat_sys_signalfd4
+	PTR	sys_eventfd2			/* 4325 */
+	PTR	sys_epoll_create1
+	PTR	sys_dup3
+	PTR	sys_pipe2
+	PTR	sys_inotify_init1
 	.size	sys_call_table,.-sys_call_table
diff --git a/arch/mips/kernel/setup.c b/arch/mips/kernel/setup.c
index 8af84867e74d..2aae76bce293 100644
--- a/arch/mips/kernel/setup.c
+++ b/arch/mips/kernel/setup.c
@@ -78,7 +78,7 @@ void __init add_memory_region(phys_t start, phys_t size, long type)
 
 	/* Sanity check */
 	if (start + size < start) {
-		printk("Trying to add an invalid memory region, skipped\n");
+		pr_warning("Trying to add an invalid memory region, skipped\n");
 		return;
 	}
 
@@ -92,7 +92,7 @@ void __init add_memory_region(phys_t start, phys_t size, long type)
 	}
 
 	if (x == BOOT_MEM_MAP_MAX) {
-		printk("Ooops! Too many entries in the memory map!\n");
+		pr_err("Ooops! Too many entries in the memory map!\n");
 		return;
 	}
 
@@ -108,22 +108,22 @@ static void __init print_memory_map(void)
 	const int field = 2 * sizeof(unsigned long);
 
 	for (i = 0; i < boot_mem_map.nr_map; i++) {
-		printk(" memory: %0*Lx @ %0*Lx ",
+		printk(KERN_INFO " memory: %0*Lx @ %0*Lx ",
 		       field, (unsigned long long) boot_mem_map.map[i].size,
 		       field, (unsigned long long) boot_mem_map.map[i].addr);
 
 		switch (boot_mem_map.map[i].type) {
 		case BOOT_MEM_RAM:
-			printk("(usable)\n");
+			printk(KERN_CONT "(usable)\n");
 			break;
 		case BOOT_MEM_ROM_DATA:
-			printk("(ROM data)\n");
+			printk(KERN_CONT "(ROM data)\n");
 			break;
 		case BOOT_MEM_RESERVED:
-			printk("(reserved)\n");
+			printk(KERN_CONT "(reserved)\n");
 			break;
 		default:
-			printk("type %lu\n", boot_mem_map.map[i].type);
+			printk(KERN_CONT "type %lu\n", boot_mem_map.map[i].type);
 			break;
 		}
 	}
@@ -185,11 +185,11 @@ static unsigned long __init init_initrd(void)
 
 sanitize:
 	if (initrd_start & ~PAGE_MASK) {
-		printk(KERN_ERR "initrd start must be page aligned\n");
+		pr_err("initrd start must be page aligned\n");
 		goto disable;
 	}
 	if (initrd_start < PAGE_OFFSET) {
-		printk(KERN_ERR "initrd start < PAGE_OFFSET\n");
+		pr_err("initrd start < PAGE_OFFSET\n");
 		goto disable;
 	}
 
@@ -221,18 +221,18 @@ static void __init finalize_initrd(void)
 		goto disable;
 	}
 	if (__pa(initrd_end) > PFN_PHYS(max_low_pfn)) {
-		printk("Initrd extends beyond end of memory");
+		printk(KERN_ERR "Initrd extends beyond end of memory");
 		goto disable;
 	}
 
 	reserve_bootmem(__pa(initrd_start), size, BOOTMEM_DEFAULT);
 	initrd_below_start_ok = 1;
 
-	printk(KERN_INFO "Initial ramdisk at: 0x%lx (%lu bytes)\n",
-	       initrd_start, size);
+	pr_info("Initial ramdisk at: 0x%lx (%lu bytes)\n",
+		initrd_start, size);
 	return;
 disable:
-	printk(" - disabling initrd\n");
+	printk(KERN_CONT " - disabling initrd\n");
 	initrd_start = 0;
 	initrd_end = 0;
 }
@@ -310,14 +310,12 @@ static void __init bootmem_init(void)
 	if (min_low_pfn >= max_low_pfn)
 		panic("Incorrect memory mapping !!!");
 	if (min_low_pfn > ARCH_PFN_OFFSET) {
-		printk(KERN_INFO
-		       "Wasting %lu bytes for tracking %lu unused pages\n",
-		       (min_low_pfn - ARCH_PFN_OFFSET) * sizeof(struct page),
-		       min_low_pfn - ARCH_PFN_OFFSET);
+		pr_info("Wasting %lu bytes for tracking %lu unused pages\n",
+			(min_low_pfn - ARCH_PFN_OFFSET) * sizeof(struct page),
+			min_low_pfn - ARCH_PFN_OFFSET);
 	} else if (min_low_pfn < ARCH_PFN_OFFSET) {
-		printk(KERN_INFO
-		       "%lu free pages won't be used\n",
-		       ARCH_PFN_OFFSET - min_low_pfn);
+		pr_info("%lu free pages won't be used\n",
+			ARCH_PFN_OFFSET - min_low_pfn);
 	}
 	min_low_pfn = ARCH_PFN_OFFSET;
 
@@ -471,7 +469,7 @@ static void __init arch_mem_init(char **cmdline_p)
 	/* call board setup routine */
 	plat_mem_setup();
 
-	printk("Determined physical RAM map:\n");
+	pr_info("Determined physical RAM map:\n");
 	print_memory_map();
 
 	strlcpy(command_line, arcs_cmdline, sizeof(command_line));
@@ -482,7 +480,7 @@ static void __init arch_mem_init(char **cmdline_p)
 	parse_early_param();
 
 	if (usermem) {
-		printk("User-defined physical RAM map:\n");
+		pr_info("User-defined physical RAM map:\n");
 		print_memory_map();
 	}
 
diff --git a/arch/mips/kernel/traps.c b/arch/mips/kernel/traps.c
index b8ea4e9d0d87..426cced1e9dc 100644
--- a/arch/mips/kernel/traps.c
+++ b/arch/mips/kernel/traps.c
@@ -23,6 +23,8 @@
 #include <linux/bootmem.h>
 #include <linux/interrupt.h>
 #include <linux/ptrace.h>
+#include <linux/kgdb.h>
+#include <linux/kdebug.h>
 
 #include <asm/bootinfo.h>
 #include <asm/branch.h>
@@ -425,6 +427,10 @@ asmlinkage void do_be(struct pt_regs *regs)
 	printk(KERN_ALERT "%s bus error, epc == %0*lx, ra == %0*lx\n",
 	       data ? "Data" : "Instruction",
 	       field, regs->cp0_epc, field, regs->regs[31]);
+	if (notify_die(DIE_OOPS, "bus error", regs, SIGBUS, 0, 0)
+	    == NOTIFY_STOP)
+		return;
+
 	die_if_kernel("Oops", regs);
 	force_sig(SIGBUS, current);
 }
@@ -623,6 +629,9 @@ asmlinkage void do_fpe(struct pt_regs *regs, unsigned long fcr31)
 {
 	siginfo_t info;
 
+	if (notify_die(DIE_FP, "FP exception", regs, SIGFPE, 0, 0)
+	    == NOTIFY_STOP)
+		return;
 	die_if_kernel("FP exception in kernel code", regs);
 
 	if (fcr31 & FPU_CSR_UNI_X) {
@@ -682,6 +691,9 @@ static void do_trap_or_bp(struct pt_regs *regs, unsigned int code,
 	siginfo_t info;
 	char b[40];
 
+	if (notify_die(DIE_TRAP, str, regs, code, 0, 0) == NOTIFY_STOP)
+		return;
+
 	/*
 	 * A short test says that IRIX 5.3 sends SIGTRAP for all trap
 	 * insns, even for trap and break codes that indicate arithmetic
@@ -762,6 +774,10 @@ asmlinkage void do_ri(struct pt_regs *regs)
 	unsigned int opcode = 0;
 	int status = -1;
 
+	if (notify_die(DIE_RI, "RI Fault", regs, SIGSEGV, 0, 0)
+	    == NOTIFY_STOP)
+		return;
+
 	die_if_kernel("Reserved instruction in kernel code", regs);
 
 	if (unlikely(compute_return_epc(regs) < 0))
@@ -1537,6 +1553,11 @@ void __init trap_init(void)
 	extern char except_vec4;
 	unsigned long i;
 
+#if defined(CONFIG_KGDB)
+	if (kgdb_early_setup)
+		return;	/* Already done */
+#endif
+
 	if (cpu_has_veic || cpu_has_vint)
 		ebase = (unsigned long) alloc_bootmem_low_pages(0x200 + VECTORSPACING*64);
 	else
diff --git a/arch/mips/mm/Makefile b/arch/mips/mm/Makefile
index 48731020ca0e..44e8dd8106bf 100644
--- a/arch/mips/mm/Makefile
+++ b/arch/mips/mm/Makefile
@@ -3,8 +3,7 @@
 #
 
 obj-y				+= cache.o dma-default.o extable.o fault.o \
-				   init.o pgtable.o tlbex.o tlbex-fault.o \
-				   uasm.o page.o
+				   init.o tlbex.o tlbex-fault.o uasm.o page.o
 
 obj-$(CONFIG_32BIT)		+= ioremap.o pgtable-32.o
 obj-$(CONFIG_64BIT)		+= pgtable-64.o
diff --git a/arch/mips/mm/dma-default.c b/arch/mips/mm/dma-default.c
index ae39dd88b9aa..891312f8e5a6 100644
--- a/arch/mips/mm/dma-default.c
+++ b/arch/mips/mm/dma-default.c
@@ -348,7 +348,7 @@ void dma_sync_sg_for_device(struct device *dev, struct scatterlist *sg, int nele
 
 EXPORT_SYMBOL(dma_sync_sg_for_device);
 
-int dma_mapping_error(dma_addr_t dma_addr)
+int dma_mapping_error(struct device *dev, dma_addr_t dma_addr)
 {
 	return 0;
 }
diff --git a/arch/mips/mm/pgtable.c b/arch/mips/mm/pgtable.c
deleted file mode 100644
index 7dfa579ab24c..000000000000
--- a/arch/mips/mm/pgtable.c
+++ /dev/null
@@ -1,36 +0,0 @@
-#include <linux/kernel.h>
-#include <linux/mm.h>
-#include <linux/swap.h>
-
-void show_mem(void)
-{
-#ifndef CONFIG_NEED_MULTIPLE_NODES  /* XXX(hch): later.. */
-	int pfn, total = 0, reserved = 0;
-	int shared = 0, cached = 0;
-	int highmem = 0;
-	struct page *page;
-
-	printk("Mem-info:\n");
-	show_free_areas();
-	pfn = max_mapnr;
-	while (pfn-- > 0) {
-		if (!pfn_valid(pfn))
-			continue;
-		page = pfn_to_page(pfn);
-		total++;
-		if (PageHighMem(page))
-			highmem++;
-		if (PageReserved(page))
-			reserved++;
-		else if (PageSwapCache(page))
-			cached++;
-		else if (page_count(page))
-			shared += page_count(page) - 1;
-	}
-	printk("%d pages of RAM\n", total);
-	printk("%d pages of HIGHMEM\n", highmem);
-	printk("%d reserved pages\n", reserved);
-	printk("%d pages shared\n", shared);
-	printk("%d pages swap cached\n", cached);
-#endif
-}
diff --git a/arch/mips/mm/tlb-r3k.c b/arch/mips/mm/tlb-r3k.c
index a782549ac80e..f0cf46adb978 100644
--- a/arch/mips/mm/tlb-r3k.c
+++ b/arch/mips/mm/tlb-r3k.c
@@ -246,10 +246,6 @@ void __init add_wired_entry(unsigned long entrylo0, unsigned long entrylo1,
 		old_pagemask = read_c0_pagemask();
 		w = read_c0_wired();
 		write_c0_wired(w + 1);
-		if (read_c0_wired() != w + 1) {
-			printk("[tlbwired] No WIRED reg?\n");
-			return;
-		}
 		write_c0_index(w << 8);
 		write_c0_pagemask(pagemask);
 		write_c0_entryhi(entryhi);
diff --git a/arch/mips/mti-malta/Makefile b/arch/mips/mti-malta/Makefile
index f8064446e812..3b7dd722c32a 100644
--- a/arch/mips/mti-malta/Makefile
+++ b/arch/mips/mti-malta/Makefile
@@ -13,7 +13,6 @@ obj-y				:= malta-amon.o malta-cmdline.o \
 
 obj-$(CONFIG_EARLY_PRINTK)	+= malta-console.o
 obj-$(CONFIG_PCI)		+= malta-pci.o
-obj-$(CONFIG_KGDB)		+= malta-kgdb.o
 
 # FIXME FIXME FIXME
 obj-$(CONFIG_MIPS_MT_SMTC)	+= malta_smtc.o
diff --git a/arch/mips/mti-malta/malta-init.c b/arch/mips/mti-malta/malta-init.c
index c0653021a171..4832af251668 100644
--- a/arch/mips/mti-malta/malta-init.c
+++ b/arch/mips/mti-malta/malta-init.c
@@ -37,15 +37,6 @@
 
 #include <asm/mips-boards/malta.h>
 
-#ifdef CONFIG_KGDB
-extern int rs_kgdb_hook(int, int);
-extern int rs_putDebugChar(char);
-extern char rs_getDebugChar(void);
-extern int saa9730_kgdb_hook(int);
-extern int saa9730_putDebugChar(char);
-extern char saa9730_getDebugChar(void);
-#endif
-
 int prom_argc;
 int *_prom_argv, *_prom_envp;
 
@@ -173,51 +164,6 @@ static void __init console_config(void)
 }
 #endif
 
-#ifdef CONFIG_KGDB
-void __init kgdb_config(void)
-{
-	extern int (*generic_putDebugChar)(char);
-	extern char (*generic_getDebugChar)(void);
-	char *argptr;
-	int line, speed;
-
-	argptr = prom_getcmdline();
-	if ((argptr = strstr(argptr, "kgdb=ttyS")) != NULL) {
-		argptr += strlen("kgdb=ttyS");
-		if (*argptr != '0' && *argptr != '1')
-			printk("KGDB: Unknown serial line /dev/ttyS%c, "
-			       "falling back to /dev/ttyS1\n", *argptr);
-		line = *argptr == '0' ? 0 : 1;
-		printk("KGDB: Using serial line /dev/ttyS%d for session\n", line);
-
-		speed = 0;
-		if (*++argptr == ',')
-		{
-			int c;
-			while ((c = *++argptr) && ('0' <= c && c <= '9'))
-				speed = speed * 10 + c - '0';
-		}
-		{
-			speed = rs_kgdb_hook(line, speed);
-			generic_putDebugChar = rs_putDebugChar;
-			generic_getDebugChar = rs_getDebugChar;
-		}
-
-		pr_info("KGDB: Using serial line /dev/ttyS%d at %d for "
-		        "session, please connect your debugger\n",
-		        line ? 1 : 0, speed);
-
-		{
-			char *s;
-			for (s = "Please connect GDB to this port\r\n"; *s; )
-				generic_putDebugChar(*s++);
-		}
-
-		/* Breakpoint is invoked after interrupts are initialised */
-	}
-}
-#endif
-
 static void __init mips_nmi_setup(void)
 {
 	void *base;
diff --git a/arch/mips/mti-malta/malta-kgdb.c b/arch/mips/mti-malta/malta-kgdb.c
deleted file mode 100644
index 6a1854de4579..000000000000
--- a/arch/mips/mti-malta/malta-kgdb.c
+++ /dev/null
@@ -1,133 +0,0 @@
-/*
- * Carsten Langgaard, carstenl@mips.com
- * Copyright (C) 2000 MIPS Technologies, Inc.  All rights reserved.
- *
- *  This program is free software; you can distribute it and/or modify it
- *  under the terms of the GNU General Public License (Version 2) as
- *  published by the Free Software Foundation.
- *
- *  This program is distributed in the hope it will be useful, but WITHOUT
- *  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- *  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
- *  for more details.
- *
- *  You should have received a copy of the GNU General Public License along
- *  with this program; if not, write to the Free Software Foundation, Inc.,
- *  59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
- *
- * This is the interface to the remote debugger stub.
- */
-#include <linux/types.h>
-#include <linux/serial.h>
-#include <linux/serialP.h>
-#include <linux/serial_reg.h>
-
-#include <asm/serial.h>
-#include <asm/io.h>
-
-static struct serial_state rs_table[] = {
-	SERIAL_PORT_DFNS	/* Defined in serial.h */
-};
-
-static struct async_struct kdb_port_info = {0};
-
-int (*generic_putDebugChar)(char);
-char (*generic_getDebugChar)(void);
-
-static __inline__ unsigned int serial_in(struct async_struct *info, int offset)
-{
-	return inb(info->port + offset);
-}
-
-static __inline__ void serial_out(struct async_struct *info, int offset,
-				int value)
-{
-	outb(value, info->port+offset);
-}
-
-int rs_kgdb_hook(int tty_no, int speed) {
-	int t;
-	struct serial_state *ser = &rs_table[tty_no];
-
-	kdb_port_info.state = ser;
-	kdb_port_info.magic = SERIAL_MAGIC;
-	kdb_port_info.port = ser->port;
-	kdb_port_info.flags = ser->flags;
-
-	/*
-	 * Clear all interrupts
-	 */
-	serial_in(&kdb_port_info, UART_LSR);
-	serial_in(&kdb_port_info, UART_RX);
-	serial_in(&kdb_port_info, UART_IIR);
-	serial_in(&kdb_port_info, UART_MSR);
-
-	/*
-	 * Now, initialize the UART
-	 */
-	serial_out(&kdb_port_info, UART_LCR, UART_LCR_WLEN8);	/* reset DLAB */
-	if (kdb_port_info.flags & ASYNC_FOURPORT) {
-		kdb_port_info.MCR = UART_MCR_DTR | UART_MCR_RTS;
-		t = UART_MCR_DTR | UART_MCR_OUT1;
-	} else {
-		kdb_port_info.MCR
-			= UART_MCR_DTR | UART_MCR_RTS | UART_MCR_OUT2;
-		t = UART_MCR_DTR | UART_MCR_RTS;
-	}
-
-	kdb_port_info.MCR = t;		/* no interrupts, please */
-	serial_out(&kdb_port_info, UART_MCR, kdb_port_info.MCR);
-
-	/*
-	 * and set the speed of the serial port
-	 */
-	if (speed == 0)
-		speed = 9600;
-
-	t = kdb_port_info.state->baud_base / speed;
-	/* set DLAB */
-	serial_out(&kdb_port_info, UART_LCR, UART_LCR_WLEN8 | UART_LCR_DLAB);
-	serial_out(&kdb_port_info, UART_DLL, t & 0xff);/* LS of divisor */
-	serial_out(&kdb_port_info, UART_DLM, t >> 8);  /* MS of divisor */
-	/* reset DLAB */
-	serial_out(&kdb_port_info, UART_LCR, UART_LCR_WLEN8);
-
-	return speed;
-}
-
-int putDebugChar(char c)
-{
-	return generic_putDebugChar(c);
-}
-
-char getDebugChar(void)
-{
-	return generic_getDebugChar();
-}
-
-int rs_putDebugChar(char c)
-{
-
-	if (!kdb_port_info.state) { 	/* need to init device first */
-		return 0;
-	}
-
-	while ((serial_in(&kdb_port_info, UART_LSR) & UART_LSR_THRE) == 0)
-		;
-
-	serial_out(&kdb_port_info, UART_TX, c);
-
-	return 1;
-}
-
-char rs_getDebugChar(void)
-{
-	if (!kdb_port_info.state) { 	/* need to init device first */
-		return 0;
-	}
-
-	while (!(serial_in(&kdb_port_info, UART_LSR) & 1))
-		;
-
-	return serial_in(&kdb_port_info, UART_RX);
-}
diff --git a/arch/mips/mti-malta/malta-setup.c b/arch/mips/mti-malta/malta-setup.c
index e7cad54936ca..dc78b8983eeb 100644
--- a/arch/mips/mti-malta/malta-setup.c
+++ b/arch/mips/mti-malta/malta-setup.c
@@ -199,10 +199,6 @@ void __init plat_mem_setup(void)
 	 */
 	enable_dma(4);
 
-#ifdef CONFIG_KGDB
-	kgdb_config();
-#endif
-
 #ifdef CONFIG_DMA_COHERENT
 	if (mips_revision_sconid != MIPS_REVISION_SCON_BONITO)
 		panic("Hardware DMA cache coherency not supported");
diff --git a/arch/mips/nxp/pnx8550/common/Makefile b/arch/mips/nxp/pnx8550/common/Makefile
index 31cc1a5cec3b..dd9e7b1f7fd3 100644
--- a/arch/mips/nxp/pnx8550/common/Makefile
+++ b/arch/mips/nxp/pnx8550/common/Makefile
@@ -24,6 +24,5 @@
 
 obj-y := setup.o prom.o int.o reset.o time.o proc.o platform.o
 obj-$(CONFIG_PCI) += pci.o
-obj-$(CONFIG_KGDB) += gdb_hook.o
 
 EXTRA_CFLAGS += -Werror
diff --git a/arch/mips/nxp/pnx8550/common/gdb_hook.c b/arch/mips/nxp/pnx8550/common/gdb_hook.c
deleted file mode 100644
index ad4624f6d9bc..000000000000
--- a/arch/mips/nxp/pnx8550/common/gdb_hook.c
+++ /dev/null
@@ -1,109 +0,0 @@
-/*
- * Carsten Langgaard, carstenl@mips.com
- * Copyright (C) 2000 MIPS Technologies, Inc.  All rights reserved.
- *
- * ########################################################################
- *
- *  This program is free software; you can distribute it and/or modify it
- *  under the terms of the GNU General Public License (Version 2) as
- *  published by the Free Software Foundation.
- *
- *  This program is distributed in the hope it will be useful, but WITHOUT
- *  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- *  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
- *  for more details.
- *
- *  You should have received a copy of the GNU General Public License along
- *  with this program; if not, write to the Free Software Foundation, Inc.,
- *  59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
- *
- * ########################################################################
- *
- * This is the interface to the remote debugger stub.
- *
- */
-#include <linux/types.h>
-#include <linux/serial.h>
-#include <linux/serialP.h>
-#include <linux/serial_reg.h>
-#include <linux/serial_ip3106.h>
-
-#include <asm/serial.h>
-#include <asm/io.h>
-
-#include <uart.h>
-
-static struct serial_state rs_table[IP3106_NR_PORTS] = {
-};
-static struct async_struct kdb_port_info = {0};
-
-void rs_kgdb_hook(int tty_no)
-{
-	struct serial_state *ser = &rs_table[tty_no];
-
-	kdb_port_info.state = ser;
-	kdb_port_info.magic = SERIAL_MAGIC;
-	kdb_port_info.port  = tty_no;
-	kdb_port_info.flags = ser->flags;
-
-	/*
-	 * Clear all interrupts
-	 */
-	/* Clear all the transmitter FIFO counters (pointer and status) */
-	ip3106_lcr(UART_BASE, tty_no) |= IP3106_UART_LCR_TX_RST;
-	/* Clear all the receiver FIFO counters (pointer and status) */
-	ip3106_lcr(UART_BASE, tty_no) |= IP3106_UART_LCR_RX_RST;
-	/* Clear all interrupts */
-	ip3106_iclr(UART_BASE, tty_no) = IP3106_UART_INT_ALLRX |
-		IP3106_UART_INT_ALLTX;
-
-	/*
-	 * Now, initialize the UART
-	 */
-	ip3106_lcr(UART_BASE, tty_no) = IP3106_UART_LCR_8BIT;
-	ip3106_baud(UART_BASE, tty_no) = 5; // 38400 Baud
-}
-
-int putDebugChar(char c)
-{
-	/* Wait until FIFO not full */
-	while (((ip3106_fifo(UART_BASE, kdb_port_info.port) & IP3106_UART_FIFO_TXFIFO) >> 16) >= 16)
-		;
-	/* Send one char */
-	ip3106_fifo(UART_BASE, kdb_port_info.port) = c;
-
-	return 1;
-}
-
-char getDebugChar(void)
-{
-	char ch;
-
-	/* Wait until there is a char in the FIFO */
-	while (!((ip3106_fifo(UART_BASE, kdb_port_info.port) &
-					IP3106_UART_FIFO_RXFIFO) >> 8))
-		;
-	/* Read one char */
-	ch = ip3106_fifo(UART_BASE, kdb_port_info.port) &
-		IP3106_UART_FIFO_RBRTHR;
-	/* Advance the RX FIFO read pointer */
-	ip3106_lcr(UART_BASE, kdb_port_info.port) |= IP3106_UART_LCR_RX_NEXT;
-	return (ch);
-}
-
-void rs_disable_debug_interrupts(void)
-{
-	ip3106_ien(UART_BASE, kdb_port_info.port) = 0; /* Disable all interrupts */
-}
-
-void rs_enable_debug_interrupts(void)
-{
-	/* Clear all the transmitter FIFO counters (pointer and status) */
-	ip3106_lcr(UART_BASE, kdb_port_info.port) |= IP3106_UART_LCR_TX_RST;
-	/* Clear all the receiver FIFO counters (pointer and status) */
-	ip3106_lcr(UART_BASE, kdb_port_info.port) |= IP3106_UART_LCR_RX_RST;
-	/* Clear all interrupts */
-	ip3106_iclr(UART_BASE, kdb_port_info.port) = IP3106_UART_INT_ALLRX |
-		IP3106_UART_INT_ALLTX;
-	ip3106_ien(UART_BASE, kdb_port_info.port)  = IP3106_UART_INT_ALLRX; /* Enable RX interrupts */
-}
diff --git a/arch/mips/nxp/pnx8550/common/int.c b/arch/mips/nxp/pnx8550/common/int.c
index aad03429a5e3..f080f114a1bf 100644
--- a/arch/mips/nxp/pnx8550/common/int.c
+++ b/arch/mips/nxp/pnx8550/common/int.c
@@ -34,7 +34,6 @@
 #include <linux/module.h>
 
 #include <asm/io.h>
-#include <asm/gdb-stub.h>
 #include <int.h>
 #include <uart.h>
 
diff --git a/arch/mips/nxp/pnx8550/common/proc.c b/arch/mips/nxp/pnx8550/common/proc.c
index 18b125e3b65d..acf1fa889444 100644
--- a/arch/mips/nxp/pnx8550/common/proc.c
+++ b/arch/mips/nxp/pnx8550/common/proc.c
@@ -22,7 +22,6 @@
 #include <linux/random.h>
 
 #include <asm/io.h>
-#include <asm/gdb-stub.h>
 #include <int.h>
 #include <uart.h>
 
diff --git a/arch/mips/nxp/pnx8550/common/setup.c b/arch/mips/nxp/pnx8550/common/setup.c
index 92d764c97701..2aed50fef10f 100644
--- a/arch/mips/nxp/pnx8550/common/setup.c
+++ b/arch/mips/nxp/pnx8550/common/setup.c
@@ -47,7 +47,6 @@ extern void pnx8550_machine_halt(void);
 extern void pnx8550_machine_power_off(void);
 extern struct resource ioport_resource;
 extern struct resource iomem_resource;
-extern void rs_kgdb_hook(int tty_no);
 extern char *prom_getcmdline(void);
 
 struct resource standard_io_resources[] = {
@@ -142,16 +141,5 @@ void __init plat_mem_setup(void)
 		ip3106_baud(UART_BASE, pnx8550_console_port) = 5;
 	}
 
-#ifdef CONFIG_KGDB
-	argptr = prom_getcmdline();
-	if ((argptr = strstr(argptr, "kgdb=ttyS")) != NULL) {
-		int line;
-		argptr += strlen("kgdb=ttyS");
-		line = *argptr == '0' ? 0 : 1;
-		rs_kgdb_hook(line);
-		pr_info("KGDB: Using ttyS%i for session, "
-		        "please connect your debugger\n", line ? 1 : 0);
-	}
-#endif
 	return;
 }
diff --git a/arch/mips/pci/ops-tx3927.c b/arch/mips/pci/ops-tx3927.c
index 8a17a39e5bf2..31c150196595 100644
--- a/arch/mips/pci/ops-tx3927.c
+++ b/arch/mips/pci/ops-tx3927.c
@@ -37,45 +37,48 @@
 #include <linux/pci.h>
 #include <linux/kernel.h>
 #include <linux/init.h>
+#include <linux/interrupt.h>
 
 #include <asm/addrspace.h>
+#include <asm/txx9irq.h>
+#include <asm/txx9/pci.h>
 #include <asm/txx9/tx3927.h>
 
-static inline int mkaddr(unsigned char bus, unsigned char dev_fn,
-	unsigned char where)
+static int mkaddr(struct pci_bus *bus, unsigned char devfn, unsigned char where)
 {
-	if (bus == 0 && dev_fn >= PCI_DEVFN(TX3927_PCIC_MAX_DEVNU, 0))
-		return PCIBIOS_DEVICE_NOT_FOUND;
-
-	tx3927_pcicptr->ica = ((bus & 0xff) << 0x10) |
-	                      ((dev_fn & 0xff) << 0x08) |
-	                      (where & 0xfc);
+	if (bus->parent == NULL &&
+	    devfn >= PCI_DEVFN(TX3927_PCIC_MAX_DEVNU, 0))
+		return -1;
+	tx3927_pcicptr->ica =
+		((bus->number & 0xff) << 0x10) |
+		((devfn & 0xff) << 0x08) |
+		(where & 0xfc) | (bus->parent ? 1 : 0);
 
 	/* clear M_ABORT and Disable M_ABORT Int. */
 	tx3927_pcicptr->pcistat |= PCI_STATUS_REC_MASTER_ABORT;
 	tx3927_pcicptr->pcistatim &= ~PCI_STATUS_REC_MASTER_ABORT;
-
-	return PCIBIOS_SUCCESSFUL;
+	return 0;
 }
 
 static inline int check_abort(void)
 {
-	if (tx3927_pcicptr->pcistat & PCI_STATUS_REC_MASTER_ABORT)
+	if (tx3927_pcicptr->pcistat & PCI_STATUS_REC_MASTER_ABORT) {
 		tx3927_pcicptr->pcistat |= PCI_STATUS_REC_MASTER_ABORT;
 		tx3927_pcicptr->pcistatim |= PCI_STATUS_REC_MASTER_ABORT;
+		/* flush write buffer */
+		iob();
 		return PCIBIOS_DEVICE_NOT_FOUND;
-
+	}
 	return PCIBIOS_SUCCESSFUL;
 }
 
 static int tx3927_pci_read_config(struct pci_bus *bus, unsigned int devfn,
 	int where, int size, u32 * val)
 {
-	int ret;
-
-	ret = mkaddr(bus->number, devfn, where);
-	if (ret)
-		return ret;
+	if (mkaddr(bus, devfn, where)) {
+		*val = 0xffffffff;
+		return PCIBIOS_DEVICE_NOT_FOUND;
+	}
 
 	switch (size) {
 	case 1:
@@ -97,11 +100,8 @@ static int tx3927_pci_read_config(struct pci_bus *bus, unsigned int devfn,
 static int tx3927_pci_write_config(struct pci_bus *bus, unsigned int devfn,
 	int where, int size, u32 val)
 {
-	int ret;
-
-	ret = mkaddr(bus->number, devfn, where);
-	if (ret)
-		return ret;
+	if (mkaddr(bus, devfn, where))
+		return PCIBIOS_DEVICE_NOT_FOUND;
 
 	switch (size) {
 	case 1:
@@ -117,11 +117,6 @@ static int tx3927_pci_write_config(struct pci_bus *bus, unsigned int devfn,
 		tx3927_pcicptr->icd = cpu_to_le32(val);
 	}
 
-	if (tx3927_pcicptr->pcistat & PCI_STATUS_REC_MASTER_ABORT)
-		tx3927_pcicptr->pcistat |= PCI_STATUS_REC_MASTER_ABORT;
-		tx3927_pcicptr->pcistatim |= PCI_STATUS_REC_MASTER_ABORT;
-		return PCIBIOS_DEVICE_NOT_FOUND;
-
 	return check_abort();
 }
 
@@ -202,3 +197,34 @@ void __init tx3927_pcic_setup(struct pci_controller *channel,
 		PCI_COMMAND_PARITY | PCI_COMMAND_SERR;
 	local_irq_restore(flags);
 }
+
+static irqreturn_t tx3927_pcierr_interrupt(int irq, void *dev_id)
+{
+	struct pt_regs *regs = get_irq_regs();
+
+	if (txx9_pci_err_action != TXX9_PCI_ERR_IGNORE) {
+		printk(KERN_WARNING "PCI error interrupt at 0x%08lx.\n",
+		       regs->cp0_epc);
+		printk(KERN_WARNING "pcistat:%02x, lbstat:%04lx\n",
+		       tx3927_pcicptr->pcistat, tx3927_pcicptr->lbstat);
+	}
+	if (txx9_pci_err_action != TXX9_PCI_ERR_PANIC) {
+		/* clear all pci errors */
+		tx3927_pcicptr->pcistat |= TX3927_PCIC_PCISTATIM_ALL;
+		tx3927_pcicptr->istat = TX3927_PCIC_IIM_ALL;
+		tx3927_pcicptr->tstat = TX3927_PCIC_TIM_ALL;
+		tx3927_pcicptr->lbstat = TX3927_PCIC_LBIM_ALL;
+		return IRQ_HANDLED;
+	}
+	console_verbose();
+	panic("PCI error.");
+}
+
+void __init tx3927_setup_pcierr_irq(void)
+{
+	if (request_irq(TXX9_IRQ_BASE + TX3927_IR_PCI,
+			tx3927_pcierr_interrupt,
+			IRQF_DISABLED, "PCI error",
+			(void *)TX3927_PCIC_REG))
+		printk(KERN_WARNING "Failed to request irq for PCIERR\n");
+}
diff --git a/arch/mips/pci/ops-tx4927.c b/arch/mips/pci/ops-tx4927.c
index c6b49bccd274..5989e747527f 100644
--- a/arch/mips/pci/ops-tx4927.c
+++ b/arch/mips/pci/ops-tx4927.c
@@ -16,6 +16,8 @@
  * option) any later version.
  */
 #include <linux/kernel.h>
+#include <linux/interrupt.h>
+#include <asm/txx9/pci.h>
 #include <asm/txx9/tx4927pcic.h>
 
 static struct {
@@ -85,6 +87,8 @@ static int check_abort(struct tx4927_pcic_reg __iomem *pcicptr)
 		__raw_writel((__raw_readl(&pcicptr->pcistatus) & 0x0000ffff)
 			     | (PCI_STATUS_REC_MASTER_ABORT << 16),
 			     &pcicptr->pcistatus);
+		/* flush write buffer */
+		iob();
 		code = PCIBIOS_DEVICE_NOT_FOUND;
 	}
 	return code;
@@ -192,6 +196,28 @@ static struct {
 	.gbwc = 0xfe0,	/* 4064 GBUSCLK for CCFG.GTOT=0b11 */
 };
 
+char *__devinit tx4927_pcibios_setup(char *str)
+{
+	unsigned long val;
+
+	if (!strncmp(str, "trdyto=", 7)) {
+		if (strict_strtoul(str + 7, 0, &val) == 0)
+			tx4927_pci_opts.trdyto = val;
+		return NULL;
+	}
+	if (!strncmp(str, "retryto=", 8)) {
+		if (strict_strtoul(str + 8, 0, &val) == 0)
+			tx4927_pci_opts.retryto = val;
+		return NULL;
+	}
+	if (!strncmp(str, "gbwc=", 5)) {
+		if (strict_strtoul(str + 5, 0, &val) == 0)
+			tx4927_pci_opts.gbwc = val;
+		return NULL;
+	}
+	return str;
+}
+
 void __init tx4927_pcic_setup(struct tx4927_pcic_reg __iomem *pcicptr,
 			      struct pci_controller *channel, int extarb)
 {
@@ -406,3 +432,95 @@ void tx4927_report_pcic_status(void)
 			tx4927_report_pcic_status1(pcicptrs[i].pcicptr);
 	}
 }
+
+static void tx4927_dump_pcic_settings1(struct tx4927_pcic_reg __iomem *pcicptr)
+{
+	int i;
+	__u32 __iomem *preg = (__u32 __iomem *)pcicptr;
+
+	printk(KERN_INFO "tx4927 pcic (0x%p) settings:", pcicptr);
+	for (i = 0; i < sizeof(struct tx4927_pcic_reg); i += 4, preg++) {
+		if (i % 32 == 0) {
+			printk(KERN_CONT "\n");
+			printk(KERN_INFO "%04x:", i);
+		}
+		/* skip registers with side-effects */
+		if (i == offsetof(struct tx4927_pcic_reg, g2pintack)
+		    || i == offsetof(struct tx4927_pcic_reg, g2pspc)
+		    || i == offsetof(struct tx4927_pcic_reg, g2pcfgadrs)
+		    || i == offsetof(struct tx4927_pcic_reg, g2pcfgdata)) {
+			printk(KERN_CONT " XXXXXXXX");
+			continue;
+		}
+		printk(KERN_CONT " %08x", __raw_readl(preg));
+	}
+	printk(KERN_CONT "\n");
+}
+
+void tx4927_dump_pcic_settings(void)
+{
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(pcicptrs); i++) {
+		if (pcicptrs[i].pcicptr)
+			tx4927_dump_pcic_settings1(pcicptrs[i].pcicptr);
+	}
+}
+
+irqreturn_t tx4927_pcierr_interrupt(int irq, void *dev_id)
+{
+	struct pt_regs *regs = get_irq_regs();
+	struct tx4927_pcic_reg __iomem *pcicptr =
+		(struct tx4927_pcic_reg __iomem *)(unsigned long)dev_id;
+
+	if (txx9_pci_err_action != TXX9_PCI_ERR_IGNORE) {
+		printk(KERN_WARNING "PCIERR interrupt at 0x%0*lx\n",
+		       (int)(2 * sizeof(unsigned long)), regs->cp0_epc);
+		tx4927_report_pcic_status1(pcicptr);
+	}
+	if (txx9_pci_err_action != TXX9_PCI_ERR_PANIC) {
+		/* clear all pci errors */
+		__raw_writel((__raw_readl(&pcicptr->pcistatus) & 0x0000ffff)
+			     | (TX4927_PCIC_PCISTATUS_ALL << 16),
+			     &pcicptr->pcistatus);
+		__raw_writel(TX4927_PCIC_G2PSTATUS_ALL, &pcicptr->g2pstatus);
+		__raw_writel(TX4927_PCIC_PBASTATUS_ALL, &pcicptr->pbastatus);
+		__raw_writel(TX4927_PCIC_PCICSTATUS_ALL, &pcicptr->pcicstatus);
+		return IRQ_HANDLED;
+	}
+	console_verbose();
+	tx4927_dump_pcic_settings1(pcicptr);
+	panic("PCI error.");
+}
+
+#ifdef CONFIG_TOSHIBA_FPCIB0
+static void __init tx4927_quirk_slc90e66_bridge(struct pci_dev *dev)
+{
+	struct tx4927_pcic_reg __iomem *pcicptr = pci_bus_to_pcicptr(dev->bus);
+
+	if (!pcicptr)
+		return;
+	if (__raw_readl(&pcicptr->pbacfg) & TX4927_PCIC_PBACFG_PBAEN) {
+		/* Reset Bus Arbiter */
+		__raw_writel(TX4927_PCIC_PBACFG_RPBA, &pcicptr->pbacfg);
+		/*
+		 * swap reqBP and reqXP (raise priority of SLC90E66).
+		 * SLC90E66(PCI-ISA bridge) is connected to REQ2 on
+		 * PCI Backplane board.
+		 */
+		__raw_writel(0x72543610, &pcicptr->pbareqport);
+		__raw_writel(0, &pcicptr->pbabm);
+		/* Use Fixed ParkMaster (required by SLC90E66) */
+		__raw_writel(TX4927_PCIC_PBACFG_FIXPA, &pcicptr->pbacfg);
+		/* Enable Bus Arbiter */
+		__raw_writel(TX4927_PCIC_PBACFG_FIXPA |
+			     TX4927_PCIC_PBACFG_PBAEN,
+			     &pcicptr->pbacfg);
+		printk(KERN_INFO "PCI: Use Fixed Park Master (REQPORT %08x)\n",
+		       __raw_readl(&pcicptr->pbareqport));
+	}
+}
+#define PCI_DEVICE_ID_EFAR_SLC90E66_0 0x9460
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_EFAR, PCI_DEVICE_ID_EFAR_SLC90E66_0,
+	tx4927_quirk_slc90e66_bridge);
+#endif
diff --git a/arch/mips/pci/pci-ip27.c b/arch/mips/pci/pci-ip27.c
index ce92f82b16d2..bd78368c82bf 100644
--- a/arch/mips/pci/pci-ip27.c
+++ b/arch/mips/pci/pci-ip27.c
@@ -205,6 +205,7 @@ int pcibus_to_node(struct pci_bus *bus)
 
 	return bc->nasid;
 }
+EXPORT_SYMBOL(pcibus_to_node);
 
 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SGI, PCI_DEVICE_ID_SGI_IOC3,
 	pci_fixup_ioc3);
diff --git a/arch/mips/pci/pci-tx4927.c b/arch/mips/pci/pci-tx4927.c
index 27e86a09dd41..aaa900596792 100644
--- a/arch/mips/pci/pci-tx4927.c
+++ b/arch/mips/pci/pci-tx4927.c
@@ -15,6 +15,7 @@
 #include <linux/init.h>
 #include <linux/pci.h>
 #include <linux/kernel.h>
+#include <linux/interrupt.h>
 #include <asm/txx9/generic.h>
 #include <asm/txx9/tx4927.h>
 
@@ -81,3 +82,12 @@ int __init tx4927_pciclk66_setup(void)
 		pciclk = -1;
 	return pciclk;
 }
+
+void __init tx4927_setup_pcierr_irq(void)
+{
+	if (request_irq(TXX9_IRQ_BASE + TX4927_IR_PCIERR,
+			tx4927_pcierr_interrupt,
+			IRQF_DISABLED, "PCI error",
+			(void *)TX4927_PCIC_REG))
+		printk(KERN_WARNING "Failed to request irq for PCIERR\n");
+}
diff --git a/arch/mips/pci/pci-tx4938.c b/arch/mips/pci/pci-tx4938.c
index e5375511c2b7..60e2c52c2c5e 100644
--- a/arch/mips/pci/pci-tx4938.c
+++ b/arch/mips/pci/pci-tx4938.c
@@ -15,6 +15,7 @@
 #include <linux/init.h>
 #include <linux/pci.h>
 #include <linux/kernel.h>
+#include <linux/interrupt.h>
 #include <asm/txx9/generic.h>
 #include <asm/txx9/tx4938.h>
 
@@ -132,3 +133,12 @@ int tx4938_pcic1_map_irq(const struct pci_dev *dev, u8 slot)
 	}
 	return -1;
 }
+
+void __init tx4938_setup_pcierr_irq(void)
+{
+	if (request_irq(TXX9_IRQ_BASE + TX4938_IR_PCIERR,
+			tx4927_pcierr_interrupt,
+			IRQF_DISABLED, "PCI error",
+			(void *)TX4927_PCIC_REG))
+		printk(KERN_WARNING "Failed to request irq for PCIERR\n");
+}
diff --git a/arch/mips/pci/pci.c b/arch/mips/pci/pci.c
index 77bd5b68dc43..c7fe6ec621e6 100644
--- a/arch/mips/pci/pci.c
+++ b/arch/mips/pci/pci.c
@@ -328,7 +328,11 @@ EXPORT_SYMBOL(PCIBIOS_MIN_IO);
 EXPORT_SYMBOL(PCIBIOS_MIN_MEM);
 #endif
 
-char *pcibios_setup(char *str)
+char * (*pcibios_plat_setup)(char *str) __devinitdata;
+
+char *__devinit pcibios_setup(char *str)
 {
+	if (pcibios_plat_setup)
+		return pcibios_plat_setup(str);
 	return str;
 }
diff --git a/arch/mips/pmc-sierra/msp71xx/msp_serial.c b/arch/mips/pmc-sierra/msp71xx/msp_serial.c
index 9de34302e5f4..f7261628d8a6 100644
--- a/arch/mips/pmc-sierra/msp71xx/msp_serial.c
+++ b/arch/mips/pmc-sierra/msp71xx/msp_serial.c
@@ -38,68 +38,6 @@
 #include <msp_int.h>
 #include <msp_regs.h>
 
-#ifdef CONFIG_KGDB
-/*
- * kgdb uses serial port 1 so the console can remain on port 0.
- * To use port 0 change the definition to read as follows:
- * #define DEBUG_PORT_BASE KSEG1ADDR(MSP_UART0_BASE)
- */
-#define DEBUG_PORT_BASE KSEG1ADDR(MSP_UART1_BASE)
-
-int putDebugChar(char c)
-{
-	volatile uint32_t *uart = (volatile uint32_t *)DEBUG_PORT_BASE;
-	uint32_t val = (uint32_t)c;
-
-	local_irq_disable();
-	while( !(uart[5] & 0x20) ); /* Wait for TXRDY */
-	uart[0] = val;
-	while( !(uart[5] & 0x20) ); /* Wait for TXRDY */
-	local_irq_enable();
-
-	return 1;
-}
-
-char getDebugChar(void)
-{
-	volatile uint32_t *uart = (volatile uint32_t *)DEBUG_PORT_BASE;
-	uint32_t val;
-
-	while( !(uart[5] & 0x01) ); /* Wait for RXRDY */
-	val = uart[0];
-
-	return (char)val;
-}
-
-void initDebugPort(unsigned int uartclk, unsigned int baudrate)
-{
-	unsigned int baud_divisor = (uartclk + 8 * baudrate)/(16 * baudrate);
-
-	/* Enable FIFOs */
-	writeb(UART_FCR_ENABLE_FIFO | UART_FCR_CLEAR_RCVR |
-			UART_FCR_CLEAR_XMIT | UART_FCR_TRIGGER_4,
-		(char *)DEBUG_PORT_BASE + (UART_FCR * 4));
-
-	/* Select brtc divisor */
-	writeb(UART_LCR_DLAB, (char *)DEBUG_PORT_BASE + (UART_LCR * 4));
-
-	/* Store divisor lsb */
-	writeb(baud_divisor, (char *)DEBUG_PORT_BASE + (UART_TX * 4));
-
-	/* Store divisor msb */
-	writeb(baud_divisor >> 8, (char *)DEBUG_PORT_BASE + (UART_IER * 4));
-
-	/* Set 8N1 mode */
-	writeb(UART_LCR_WLEN8, (char *)DEBUG_PORT_BASE + (UART_LCR * 4));
-
-	/* Disable flow control */
-	writeb(0, (char *)DEBUG_PORT_BASE + (UART_MCR * 4));
-
-	/* Disable receive interrupt(!) */
-	writeb(0, (char *)DEBUG_PORT_BASE + (UART_IER * 4));
-}
-#endif
-
 void __init msp_serial_setup(void)
 {
 	char    *s;
@@ -139,17 +77,6 @@ void __init msp_serial_setup(void)
 		case MACH_MSP7120_FPGA:
 			/* Enable UART1 on MSP4200 and MSP7120 */
 			*GPIO_CFG2_REG = 0x00002299;
-
-#ifdef CONFIG_KGDB
-			/* Initialize UART1 for kgdb since PMON doesn't */
-			if( DEBUG_PORT_BASE == KSEG1ADDR(MSP_UART1_BASE) ) {
-				if( mips_machtype == MACH_MSP4200_FPGA
-				 || mips_machtype == MACH_MSP7120_FPGA )
-					initDebugPort(uartclk, 19200);
-				else
-					initDebugPort(uartclk, 57600);
-			}
-#endif
 			break;
 
 		default:
diff --git a/arch/mips/pmc-sierra/yosemite/Makefile b/arch/mips/pmc-sierra/yosemite/Makefile
index 8fd9a04e3534..b16f95c3df65 100644
--- a/arch/mips/pmc-sierra/yosemite/Makefile
+++ b/arch/mips/pmc-sierra/yosemite/Makefile
@@ -4,7 +4,6 @@
 
 obj-y    += irq.o prom.o py-console.o setup.o
 
-obj-$(CONFIG_KGDB)		+= dbg_io.o
 obj-$(CONFIG_SMP)		+= smp.o
 
 EXTRA_CFLAGS += -Werror
diff --git a/arch/mips/pmc-sierra/yosemite/dbg_io.c b/arch/mips/pmc-sierra/yosemite/dbg_io.c
deleted file mode 100644
index 6362c702e389..000000000000
--- a/arch/mips/pmc-sierra/yosemite/dbg_io.c
+++ /dev/null
@@ -1,180 +0,0 @@
-/*
- * Copyright 2003 PMC-Sierra
- * Author: Manish Lachwani (lachwani@pmc-sierra.com)
- *
- *  This program is free software; you can redistribute  it and/or modify it
- *  under  the terms of  the GNU General  Public License as published by the
- *  Free Software Foundation;  either version 2 of the  License, or (at your
- *  option) any later version.
- *
- *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
- *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
- *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
- *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
- *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
- *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
- *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- *  You should have received a copy of the  GNU General Public License along
- *  with this program; if not, write  to the Free Software Foundation, Inc.,
- *  675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-/*
- * Support for KGDB for the Yosemite board. We make use of single serial
- * port to be used for KGDB as well as console. The second serial port
- * seems to be having a problem. Single IRQ is allocated for both the
- * ports. Hence, the interrupt routing code needs to figure out whether
- * the interrupt came from channel A or B.
- */
-
-#include <asm/serial.h>
-
-/*
- * Baud rate, Parity, Data and Stop bit settings for the
- * serial port on the Yosemite. Note that the Early printk
- * patch has been added. So, we should be all set to go
- */
-#define	YOSEMITE_BAUD_2400	2400
-#define	YOSEMITE_BAUD_4800	4800
-#define	YOSEMITE_BAUD_9600	9600
-#define	YOSEMITE_BAUD_19200	19200
-#define	YOSEMITE_BAUD_38400	38400
-#define	YOSEMITE_BAUD_57600	57600
-#define	YOSEMITE_BAUD_115200	115200
-
-#define	YOSEMITE_PARITY_NONE	0
-#define	YOSEMITE_PARITY_ODD	0x08
-#define	YOSEMITE_PARITY_EVEN	0x18
-#define	YOSEMITE_PARITY_MARK	0x28
-#define	YOSEMITE_PARITY_SPACE	0x38
-
-#define	YOSEMITE_DATA_5BIT	0x0
-#define	YOSEMITE_DATA_6BIT	0x1
-#define	YOSEMITE_DATA_7BIT	0x2
-#define	YOSEMITE_DATA_8BIT	0x3
-
-#define	YOSEMITE_STOP_1BIT	0x0
-#define	YOSEMITE_STOP_2BIT	0x4
-
-/* This is crucial */
-#define	SERIAL_REG_OFS		0x1
-
-#define	SERIAL_RCV_BUFFER	0x0
-#define	SERIAL_TRANS_HOLD	0x0
-#define	SERIAL_SEND_BUFFER	0x0
-#define	SERIAL_INTR_ENABLE	(1 * SERIAL_REG_OFS)
-#define	SERIAL_INTR_ID		(2 * SERIAL_REG_OFS)
-#define	SERIAL_DATA_FORMAT	(3 * SERIAL_REG_OFS)
-#define	SERIAL_LINE_CONTROL	(3 * SERIAL_REG_OFS)
-#define	SERIAL_MODEM_CONTROL	(4 * SERIAL_REG_OFS)
-#define	SERIAL_RS232_OUTPUT	(4 * SERIAL_REG_OFS)
-#define	SERIAL_LINE_STATUS	(5 * SERIAL_REG_OFS)
-#define	SERIAL_MODEM_STATUS	(6 * SERIAL_REG_OFS)
-#define	SERIAL_RS232_INPUT	(6 * SERIAL_REG_OFS)
-#define	SERIAL_SCRATCH_PAD	(7 * SERIAL_REG_OFS)
-
-#define	SERIAL_DIVISOR_LSB	(0 * SERIAL_REG_OFS)
-#define	SERIAL_DIVISOR_MSB	(1 * SERIAL_REG_OFS)
-
-/*
- * Functions to READ and WRITE to serial port 0
- */
-#define	SERIAL_READ(ofs)		(*((volatile unsigned char*)	\
-					(TITAN_SERIAL_BASE + ofs)))
-
-#define	SERIAL_WRITE(ofs, val)		((*((volatile unsigned char*)	\
-					(TITAN_SERIAL_BASE + ofs))) = val)
-
-/*
- * Functions to READ and WRITE to serial port 1
- */
-#define	SERIAL_READ_1(ofs)		(*((volatile unsigned char*)	\
-					(TITAN_SERIAL_BASE_1 + ofs)))
-
-#define	SERIAL_WRITE_1(ofs, val)	((*((volatile unsigned char*)	\
-					(TITAN_SERIAL_BASE_1 + ofs))) = val)
-
-/*
- * Second serial port initialization
- */
-void init_second_port(void)
-{
-	/* Disable Interrupts */
-	SERIAL_WRITE_1(SERIAL_LINE_CONTROL, 0x0);
-	SERIAL_WRITE_1(SERIAL_INTR_ENABLE, 0x0);
-
-	{
-		unsigned int divisor;
-
-		SERIAL_WRITE_1(SERIAL_LINE_CONTROL, 0x80);
-		divisor = TITAN_SERIAL_BASE_BAUD / YOSEMITE_BAUD_115200;
-		SERIAL_WRITE_1(SERIAL_DIVISOR_LSB, divisor & 0xff);
-
-		SERIAL_WRITE_1(SERIAL_DIVISOR_MSB,
-			       (divisor & 0xff00) >> 8);
-		SERIAL_WRITE_1(SERIAL_LINE_CONTROL, 0x0);
-	}
-
-	SERIAL_WRITE_1(SERIAL_DATA_FORMAT, YOSEMITE_DATA_8BIT |
-		       YOSEMITE_PARITY_NONE | YOSEMITE_STOP_1BIT);
-
-	/* Enable Interrupts */
-	SERIAL_WRITE_1(SERIAL_INTR_ENABLE, 0xf);
-}
-
-/* Initialize the serial port for KGDB debugging */
-void debugInit(unsigned int baud, unsigned char data, unsigned char parity,
-	       unsigned char stop)
-{
-	/* Disable Interrupts */
-	SERIAL_WRITE(SERIAL_LINE_CONTROL, 0x0);
-	SERIAL_WRITE(SERIAL_INTR_ENABLE, 0x0);
-
-	{
-		unsigned int divisor;
-
-		SERIAL_WRITE(SERIAL_LINE_CONTROL, 0x80);
-
-		divisor = TITAN_SERIAL_BASE_BAUD / baud;
-		SERIAL_WRITE(SERIAL_DIVISOR_LSB, divisor & 0xff);
-
-		SERIAL_WRITE(SERIAL_DIVISOR_MSB, (divisor & 0xff00) >> 8);
-		SERIAL_WRITE(SERIAL_LINE_CONTROL, 0x0);
-	}
-
-	SERIAL_WRITE(SERIAL_DATA_FORMAT, data | parity | stop);
-}
-
-static int remoteDebugInitialized = 0;
-
-unsigned char getDebugChar(void)
-{
-	if (!remoteDebugInitialized) {
-		remoteDebugInitialized = 1;
-		debugInit(YOSEMITE_BAUD_115200,
-			  YOSEMITE_DATA_8BIT,
-			  YOSEMITE_PARITY_NONE, YOSEMITE_STOP_1BIT);
-	}
-
-	while ((SERIAL_READ(SERIAL_LINE_STATUS) & 0x1) == 0);
-	return SERIAL_READ(SERIAL_RCV_BUFFER);
-}
-
-int putDebugChar(unsigned char byte)
-{
-	if (!remoteDebugInitialized) {
-		remoteDebugInitialized = 1;
-		debugInit(YOSEMITE_BAUD_115200,
-			  YOSEMITE_DATA_8BIT,
-			  YOSEMITE_PARITY_NONE, YOSEMITE_STOP_1BIT);
-	}
-
-	while ((SERIAL_READ(SERIAL_LINE_STATUS) & 0x20) == 0);
-	SERIAL_WRITE(SERIAL_SEND_BUFFER, byte);
-
-	return 1;
-}
diff --git a/arch/mips/pmc-sierra/yosemite/irq.c b/arch/mips/pmc-sierra/yosemite/irq.c
index 4decc2807867..5f673eba142c 100644
--- a/arch/mips/pmc-sierra/yosemite/irq.c
+++ b/arch/mips/pmc-sierra/yosemite/irq.c
@@ -141,10 +141,6 @@ asmlinkage void plat_irq_dispatch(void)
 	}
 }
 
-#ifdef CONFIG_KGDB
-extern void init_second_port(void);
-#endif
-
 /*
  * Initialize the next level interrupt handler
  */
@@ -156,11 +152,6 @@ void __init arch_init_irq(void)
 	rm7k_cpu_irq_init();
 	rm9k_cpu_irq_init();
 
-#ifdef CONFIG_KGDB
-	/* At this point, initialize the second serial port */
-	init_second_port();
-#endif
-
 #ifdef CONFIG_GDB_CONSOLE
 	register_gdb_console();
 #endif
diff --git a/arch/mips/rb532/devices.c b/arch/mips/rb532/devices.c
index 44fb0a62877f..82ab395efa33 100644
--- a/arch/mips/rb532/devices.c
+++ b/arch/mips/rb532/devices.c
@@ -49,8 +49,6 @@
 #define GPIO_ALE (1 << 0x0a)
 #define GPIO_CLE (1 << 0x0b)
 
-extern char *board_type;
-
 static struct resource korina_dev0_res[] = {
 	{
 		.name = "korina_regs",
@@ -265,14 +263,6 @@ static void __init parse_mac_addr(char *macstr)
 }
 
 
-/* DEVICE CONTROLLER 1 */
-#define CFG_DC_DEV1 	((void *)0xb8010010)
-#define CFG_DC_DEV2 	((void *)0xb8010020)
-#define CFG_DC_DEVBASE    0x0
-#define CFG_DC_DEVMASK    0x4
-#define CFG_DC_DEVC       0x8
-#define CFG_DC_DEVTC      0xC
-
 /* NAND definitions */
 #define NAND_CHIP_DELAY	25
 
@@ -301,16 +291,16 @@ static void __init rb532_nand_setup(void)
 static int __init plat_setup_devices(void)
 {
 	/* Look for the CF card reader */
-	if (!readl(CFG_DC_DEV1 + CFG_DC_DEVMASK))
+	if (!readl(IDT434_REG_BASE + DEV1MASK))
 		rb532_devs[1] = NULL;
 	else {
 		cf_slot0_res[0].start =
-		    readl(CFG_DC_DEV1 + CFG_DC_DEVBASE);
+		    readl(IDT434_REG_BASE + DEV1BASE);
 		cf_slot0_res[0].end = cf_slot0_res[0].start + 0x1000;
 	}
 
 	/* Read the NAND resources from the device controller */
-	nand_slot0_res[0].start = readl(CFG_DC_DEV2 + CFG_DC_DEVBASE);
+	nand_slot0_res[0].start = readl(IDT434_REG_BASE + DEV2BASE);
 	nand_slot0_res[0].end = nand_slot0_res[0].start + 0x1000;
 
 	/* Initialise the NAND device */
diff --git a/arch/mips/rb532/gpio.c b/arch/mips/rb532/gpio.c
index b2fe82dba0a5..00a1c7877bf4 100644
--- a/arch/mips/rb532/gpio.c
+++ b/arch/mips/rb532/gpio.c
@@ -64,7 +64,8 @@ static struct resource rb532_dev3_ctl_res[] = {
 
 void set_434_reg(unsigned reg_offs, unsigned bit, unsigned len, unsigned val)
 {
-	unsigned flags, data;
+	unsigned long flags;
+	unsigned data;
 	unsigned i = 0;
 
 	spin_lock_irqsave(&dev3.lock, flags);
@@ -90,7 +91,7 @@ EXPORT_SYMBOL(get_434_reg);
 
 void set_latch_u5(unsigned char or_mask, unsigned char nand_mask)
 {
-	unsigned flags;
+	unsigned long flags;
 
 	spin_lock_irqsave(&dev3.lock, flags);
 
diff --git a/arch/mips/rb532/time.c b/arch/mips/rb532/time.c
index db74edf8cefb..8e7a46855b50 100644
--- a/arch/mips/rb532/time.c
+++ b/arch/mips/rb532/time.c
@@ -49,8 +49,8 @@ static unsigned long __init cal_r4koff(void)
 
 void __init plat_time_init(void)
 {
-	unsigned int est_freq, flags;
-	unsigned long r4k_offset;
+	unsigned int est_freq;
+	unsigned long flags, r4k_offset;
 
 	local_irq_save(flags);
 
diff --git a/arch/mips/sgi-ip22/ip22-setup.c b/arch/mips/sgi-ip22/ip22-setup.c
index 5f389ee26fca..896a1ef84829 100644
--- a/arch/mips/sgi-ip22/ip22-setup.c
+++ b/arch/mips/sgi-ip22/ip22-setup.c
@@ -20,7 +20,6 @@
 #include <asm/irq.h>
 #include <asm/reboot.h>
 #include <asm/time.h>
-#include <asm/gdb-stub.h>
 #include <asm/io.h>
 #include <asm/traps.h>
 #include <asm/sgialib.h>
@@ -81,30 +80,6 @@ void __init plat_mem_setup(void)
 		add_preferred_console("arc", 0, NULL);
 	}
 
-#ifdef CONFIG_KGDB
-	{
-	char *kgdb_ttyd = prom_getcmdline();
-
-	if ((kgdb_ttyd = strstr(kgdb_ttyd, "kgdb=ttyd")) != NULL) {
-		int line;
-		kgdb_ttyd += strlen("kgdb=ttyd");
-		if (*kgdb_ttyd != '1' && *kgdb_ttyd != '2')
-			printk(KERN_INFO "KGDB: Uknown serial line /dev/ttyd%c"
-			       ", falling back to /dev/ttyd1\n", *kgdb_ttyd);
-		line = *kgdb_ttyd == '2' ? 0 : 1;
-		printk(KERN_INFO "KGDB: Using serial line /dev/ttyd%d for "
-		       "session\n", line ? 1 : 2);
-		rs_kgdb_hook(line);
-
-		printk(KERN_INFO "KGDB: Using serial line /dev/ttyd%d for "
-		       "session, please connect your debugger\n", line ? 1:2);
-
-		kgdb_enabled = 1;
-		/* Breakpoints and stuff are in sgi_irq_setup() */
-	}
-	}
-#endif
-
 #if defined(CONFIG_VT) && defined(CONFIG_SGI_NEWPORT_CONSOLE)
 	{
 		ULONG *gfxinfo;
diff --git a/arch/mips/sgi-ip27/Makefile b/arch/mips/sgi-ip27/Makefile
index e0a6871d56e4..31f4931b8484 100644
--- a/arch/mips/sgi-ip27/Makefile
+++ b/arch/mips/sgi-ip27/Makefile
@@ -7,7 +7,6 @@ obj-y	:= ip27-berr.o ip27-irq.o ip27-init.o ip27-klconfig.o ip27-klnuma.o \
 	   ip27-xtalk.o
 
 obj-$(CONFIG_EARLY_PRINTK)	+= ip27-console.o
-obj-$(CONFIG_KGDB)		+= ip27-dbgio.o
 obj-$(CONFIG_SMP)		+= ip27-smp.o
 
 EXTRA_CFLAGS += -Werror
diff --git a/arch/mips/sgi-ip27/ip27-dbgio.c b/arch/mips/sgi-ip27/ip27-dbgio.c
deleted file mode 100644
index 08fd88b36f80..000000000000
--- a/arch/mips/sgi-ip27/ip27-dbgio.c
+++ /dev/null
@@ -1,60 +0,0 @@
-/*
- *  This program is free software; you can redistribute  it and/or modify it
- *  under  the terms of  the GNU General  Public License as published by the
- *  Free Software Foundation;  either version 2 of the  License, or (at your
- *  option) any later version.
- *
- *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
- *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
- *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
- *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
- *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
- *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
- *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- *  You should have received a copy of the  GNU General Public License along
- *  with this program; if not, write  to the Free Software Foundation, Inc.,
- *  675 Mass Ave, Cambridge, MA 02139, USA.
- *
- * Copyright 2004 Ralf Baechle <ralf@linux-mips.org>
- */
-#include <asm/sn/addrs.h>
-#include <asm/sn/sn0/hub.h>
-#include <asm/sn/klconfig.h>
-#include <asm/sn/ioc3.h>
-#include <asm/sn/sn_private.h>
-
-#include <linux/serial.h>
-#include <linux/serial_core.h>
-#include <linux/serial_reg.h>
-
-#define IOC3_CLK        (22000000 / 3)
-#define IOC3_FLAGS      (0)
-
-static inline struct ioc3_uartregs *console_uart(void)
-{
-	struct ioc3 *ioc3;
-
-	ioc3 = (struct ioc3 *)KL_CONFIG_CH_CONS_INFO(get_nasid())->memory_base;
-
-	return &ioc3->sregs.uarta;
-}
-
-unsigned char getDebugChar(void)
-{
-	struct ioc3_uartregs *uart = console_uart();
-
-	while ((uart->iu_lsr & UART_LSR_DR) == 0);
-	return uart->iu_rbr;
-}
-
-void putDebugChar(unsigned char c)
-{
-	struct ioc3_uartregs *uart = console_uart();
-
-	while ((uart->iu_lsr & UART_LSR_THRE) == 0);
-	uart->iu_thr = c;
-}
diff --git a/arch/mips/sibyte/bcm1480/irq.c b/arch/mips/sibyte/bcm1480/irq.c
index db372a0f106d..a35818ed4263 100644
--- a/arch/mips/sibyte/bcm1480/irq.c
+++ b/arch/mips/sibyte/bcm1480/irq.c
@@ -57,30 +57,6 @@ static void bcm1480_set_affinity(unsigned int irq, cpumask_t mask);
 extern unsigned long ht_eoi_space;
 #endif
 
-#ifdef CONFIG_KGDB
-#include <asm/gdb-stub.h>
-extern void breakpoint(void);
-static int kgdb_irq;
-#ifdef CONFIG_GDB_CONSOLE
-extern void register_gdb_console(void);
-#endif
-
-/* kgdb is on when configured.  Pass "nokgdb" kernel arg to turn it off */
-static int kgdb_flag = 1;
-static int __init nokgdb(char *str)
-{
-	kgdb_flag = 0;
-	return 1;
-}
-__setup("nokgdb", nokgdb);
-
-/* Default to UART1 */
-int kgdb_port = 1;
-#ifdef CONFIG_SERIAL_SB1250_DUART
-extern char sb1250_duart_present[];
-#endif
-#endif
-
 static struct irq_chip bcm1480_irq_type = {
 	.name = "BCM1480-IMR",
 	.ack = ack_bcm1480_irq,
@@ -355,61 +331,10 @@ void __init arch_init_irq(void)
 	 * does its own management of IP7.
 	 */
 
-#ifdef CONFIG_KGDB
-	imask |= STATUSF_IP6;
-#endif
 	/* Enable necessary IPs, disable the rest */
 	change_c0_status(ST0_IM, imask);
-
-#ifdef CONFIG_KGDB
-	if (kgdb_flag) {
-		kgdb_irq = K_BCM1480_INT_UART_0 + kgdb_port;
-
-#ifdef CONFIG_SERIAL_SB1250_DUART
-		sb1250_duart_present[kgdb_port] = 0;
-#endif
-		/* Setup uart 1 settings, mapper */
-		/* QQQ FIXME */
-		__raw_writeq(M_DUART_IMR_BRK, IOADDR(A_DUART_IMRREG(kgdb_port)));
-
-		__raw_writeq(IMR_IP6_VAL,
-			     IOADDR(A_BCM1480_IMR_REGISTER(0, R_BCM1480_IMR_INTERRUPT_MAP_BASE_H) +
-			     (kgdb_irq << 3)));
-		bcm1480_unmask_irq(0, kgdb_irq);
-
-#ifdef CONFIG_GDB_CONSOLE
-		register_gdb_console();
-#endif
-		printk("Waiting for GDB on UART port %d\n", kgdb_port);
-		set_debug_traps();
-		breakpoint();
-	}
-#endif
-}
-
-#ifdef CONFIG_KGDB
-
-#include <linux/delay.h>
-
-#define duart_out(reg, val)     csr_out32(val, IOADDR(A_DUART_CHANREG(kgdb_port, reg)))
-#define duart_in(reg)           csr_in32(IOADDR(A_DUART_CHANREG(kgdb_port, reg)))
-
-static void bcm1480_kgdb_interrupt(void)
-{
-	/*
-	 * Clear break-change status (allow some time for the remote
-	 * host to stop the break, since we would see another
-	 * interrupt on the end-of-break too)
-	 */
-	kstat.irqs[smp_processor_id()][kgdb_irq]++;
-	mdelay(500);
-	duart_out(R_DUART_CMD, V_DUART_MISC_CMD_RESET_BREAK_INT |
-				M_DUART_RX_EN | M_DUART_TX_EN);
-	set_async_breakpoint(&get_irq_regs()->cp0_epc);
 }
 
-#endif 	/* CONFIG_KGDB */
-
 extern void bcm1480_mailbox_interrupt(void);
 
 static inline void dispatch_ip2(void)
@@ -462,11 +387,6 @@ asmlinkage void plat_irq_dispatch(void)
 		bcm1480_mailbox_interrupt();
 #endif
 
-#ifdef CONFIG_KGDB
-	else if (pending & CAUSEF_IP6)
-		bcm1480_kgdb_interrupt();		/* KGDB (uart 1) */
-#endif
-
 	else if (pending & CAUSEF_IP2)
 		dispatch_ip2();
 }
diff --git a/arch/mips/sibyte/cfe/setup.c b/arch/mips/sibyte/cfe/setup.c
index fd9604d5555a..3de30f79db3f 100644
--- a/arch/mips/sibyte/cfe/setup.c
+++ b/arch/mips/sibyte/cfe/setup.c
@@ -59,10 +59,6 @@ int cfe_cons_handle;
 extern unsigned long initrd_start, initrd_end;
 #endif
 
-#ifdef CONFIG_KGDB
-extern int kgdb_port;
-#endif
-
 static void __noreturn cfe_linux_exit(void *arg)
 {
 	int warm = *(int *)arg;
@@ -246,9 +242,6 @@ void __init prom_init(void)
 	int argc = fw_arg0;
 	char **envp = (char **) fw_arg2;
 	int *prom_vec = (int *) fw_arg3;
-#ifdef CONFIG_KGDB
-	char *arg;
-#endif
 
 	_machine_restart   = cfe_linux_restart;
 	_machine_halt      = cfe_linux_halt;
@@ -309,13 +302,6 @@ void __init prom_init(void)
 		}
 	}
 
-#ifdef CONFIG_KGDB
-	if ((arg = strstr(arcs_cmdline, "kgdb=duart")) != NULL)
-		kgdb_port = (arg[10] == '0') ? 0 : 1;
-	else
-		kgdb_port = 1;
-#endif
-
 #ifdef CONFIG_BLK_DEV_INITRD
 	{
 		char *ptr;
diff --git a/arch/mips/sibyte/sb1250/irq.c b/arch/mips/sibyte/sb1250/irq.c
index eac9065ffe0c..a5158483986e 100644
--- a/arch/mips/sibyte/sb1250/irq.c
+++ b/arch/mips/sibyte/sb1250/irq.c
@@ -57,16 +57,6 @@ static void sb1250_set_affinity(unsigned int irq, cpumask_t mask);
 extern unsigned long ldt_eoi_space;
 #endif
 
-#ifdef CONFIG_KGDB
-static int kgdb_irq;
-
-/* Default to UART1 */
-int kgdb_port = 1;
-#ifdef CONFIG_SERIAL_SB1250_DUART
-extern char sb1250_duart_present[];
-#endif
-#endif
-
 static struct irq_chip sb1250_irq_type = {
 	.name = "SB1250-IMR",
 	.ack = ack_sb1250_irq,
@@ -313,55 +303,10 @@ void __init arch_init_irq(void)
 	 * does its own management of IP7.
 	 */
 
-#ifdef CONFIG_KGDB
-	imask |= STATUSF_IP6;
-#endif
 	/* Enable necessary IPs, disable the rest */
 	change_c0_status(ST0_IM, imask);
-
-#ifdef CONFIG_KGDB
-	if (kgdb_flag) {
-		kgdb_irq = K_INT_UART_0 + kgdb_port;
-
-#ifdef CONFIG_SERIAL_SB1250_DUART
-		sb1250_duart_present[kgdb_port] = 0;
-#endif
-		/* Setup uart 1 settings, mapper */
-		__raw_writeq(M_DUART_IMR_BRK,
-			     IOADDR(A_DUART_IMRREG(kgdb_port)));
-
-		__raw_writeq(IMR_IP6_VAL,
-			     IOADDR(A_IMR_REGISTER(0,
-						   R_IMR_INTERRUPT_MAP_BASE) +
-				    (kgdb_irq << 3)));
-		sb1250_unmask_irq(0, kgdb_irq);
-	}
-#endif
-}
-
-#ifdef CONFIG_KGDB
-
-#include <linux/delay.h>
-
-#define duart_out(reg, val)     csr_out32(val, IOADDR(A_DUART_CHANREG(kgdb_port, reg)))
-#define duart_in(reg)           csr_in32(IOADDR(A_DUART_CHANREG(kgdb_port, reg)))
-
-static void sb1250_kgdb_interrupt(void)
-{
-	/*
-	 * Clear break-change status (allow some time for the remote
-	 * host to stop the break, since we would see another
-	 * interrupt on the end-of-break too)
-	 */
-	kstat_this_cpu.irqs[kgdb_irq]++;
-	mdelay(500);
-	duart_out(R_DUART_CMD, V_DUART_MISC_CMD_RESET_BREAK_INT |
-				M_DUART_RX_EN | M_DUART_TX_EN);
-	set_async_breakpoint(&get_irq_regs()->cp0_epc);
 }
 
-#endif 	/* CONFIG_KGDB */
-
 extern void sb1250_mailbox_interrupt(void);
 
 static inline void dispatch_ip2(void)
@@ -407,11 +352,6 @@ asmlinkage void plat_irq_dispatch(void)
 		sb1250_mailbox_interrupt();
 #endif
 
-#ifdef CONFIG_KGDB
-	else if (pending & CAUSEF_IP6)			/* KGDB (uart 1) */
-		sb1250_kgdb_interrupt();
-#endif
-
 	else if (pending & CAUSEF_IP2)
 		dispatch_ip2();
 	else
diff --git a/arch/mips/sibyte/swarm/Makefile b/arch/mips/sibyte/swarm/Makefile
index 255d692bfa18..f18ba9201bbc 100644
--- a/arch/mips/sibyte/swarm/Makefile
+++ b/arch/mips/sibyte/swarm/Makefile
@@ -1,4 +1,3 @@
 obj-y				:= setup.o rtc_xicor1241.o rtc_m41t81.o
 
 obj-$(CONFIG_I2C_BOARDINFO)	+= swarm-i2c.o
-obj-$(CONFIG_KGDB)		+= dbg_io.o
diff --git a/arch/mips/sibyte/swarm/dbg_io.c b/arch/mips/sibyte/swarm/dbg_io.c
deleted file mode 100644
index b97ae3048482..000000000000
--- a/arch/mips/sibyte/swarm/dbg_io.c
+++ /dev/null
@@ -1,76 +0,0 @@
-/*
- * kgdb debug routines for SiByte boards.
- *
- * Copyright (C) 2001 MontaVista Software Inc.
- * Author: Jun Sun, jsun@mvista.com or jsun@junsun.net
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- *
- */
-
-/* -------------------- BEGINNING OF CONFIG --------------------- */
-
-#include <linux/delay.h>
-#include <asm/io.h>
-#include <asm/sibyte/sb1250.h>
-#include <asm/sibyte/sb1250_regs.h>
-#include <asm/sibyte/sb1250_uart.h>
-#include <asm/sibyte/sb1250_int.h>
-#include <asm/addrspace.h>
-
-/*
- * We use the second serial port for kgdb traffic.
- * 	115200, 8, N, 1.
- */
-
-#define	BAUD_RATE		115200
-#define	CLK_DIVISOR		V_DUART_BAUD_RATE(BAUD_RATE)
-#define	DATA_BITS		V_DUART_BITS_PER_CHAR_8		/* or 7    */
-#define	PARITY			V_DUART_PARITY_MODE_NONE	/* or even */
-#define	STOP_BITS		M_DUART_STOP_BIT_LEN_1		/* or 2    */
-
-static int duart_initialized = 0;	/* 0: need to be init'ed by kgdb */
-
-/* -------------------- END OF CONFIG --------------------- */
-extern int kgdb_port;
-
-#define	duart_out(reg, val)	csr_out32(val, IOADDR(A_DUART_CHANREG(kgdb_port, reg)))
-#define duart_in(reg)		csr_in32(IOADDR(A_DUART_CHANREG(kgdb_port, reg)))
-
-void putDebugChar(unsigned char c);
-unsigned char getDebugChar(void);
-static void
-duart_init(int clk_divisor, int data, int parity, int stop)
-{
-	duart_out(R_DUART_MODE_REG_1, data | parity);
-	duart_out(R_DUART_MODE_REG_2, stop);
-	duart_out(R_DUART_CLK_SEL, clk_divisor);
-
-	duart_out(R_DUART_CMD, M_DUART_RX_EN | M_DUART_TX_EN);	/* enable rx and tx */
-}
-
-void
-putDebugChar(unsigned char c)
-{
-	if (!duart_initialized) {
-		duart_initialized = 1;
-		duart_init(CLK_DIVISOR, DATA_BITS, PARITY, STOP_BITS);
-	}
-	while ((duart_in(R_DUART_STATUS) & M_DUART_TX_RDY) == 0);
-	duart_out(R_DUART_TX_HOLD, c);
-}
-
-unsigned char
-getDebugChar(void)
-{
-	if (!duart_initialized) {
-		duart_initialized = 1;
-		duart_init(CLK_DIVISOR, DATA_BITS, PARITY, STOP_BITS);
-	}
-	while ((duart_in(R_DUART_STATUS) & M_DUART_RX_RDY) == 0) ;
-	return duart_in(R_DUART_RX_HOLD);
-}
-
diff --git a/arch/mips/txx9/Kconfig b/arch/mips/txx9/Kconfig
index 6de4c5aa92be..840fe757c48d 100644
--- a/arch/mips/txx9/Kconfig
+++ b/arch/mips/txx9/Kconfig
@@ -1,3 +1,27 @@
+config MACH_TX39XX
+	bool
+	select MACH_TXX9
+	select SYS_HAS_CPU_TX39XX
+
+config MACH_TX49XX
+	bool
+	select MACH_TXX9
+	select CEVT_R4K
+	select CSRC_R4K
+	select IRQ_CPU
+	select SYS_HAS_CPU_TX49XX
+	select SYS_SUPPORTS_64BIT_KERNEL
+
+config MACH_TXX9
+	bool
+	select DMA_NONCOHERENT
+	select SWAP_IO_SPACE
+	select SYS_HAS_EARLY_PRINTK
+	select SYS_SUPPORTS_32BIT_KERNEL
+	select SYS_SUPPORTS_LITTLE_ENDIAN
+	select SYS_SUPPORTS_BIG_ENDIAN
+	select GENERIC_HARDIRQS_NO__DO_IRQ
+
 config TOSHIBA_JMR3927
 	bool "Toshiba JMR-TX3927 board"
 	depends on MACH_TX39XX
@@ -24,68 +48,37 @@ config TOSHIBA_RBTX4938
 config SOC_TX3927
 	bool
 	select CEVT_TXX9
-	select DMA_NONCOHERENT
 	select HAS_TXX9_SERIAL
 	select HW_HAS_PCI
 	select IRQ_TXX9
-	select SWAP_IO_SPACE
-	select SYS_HAS_CPU_TX39XX
-	select SYS_SUPPORTS_32BIT_KERNEL
-	select SYS_SUPPORTS_LITTLE_ENDIAN
-	select SYS_SUPPORTS_BIG_ENDIAN
-	select GENERIC_HARDIRQS_NO__DO_IRQ
 	select GPIO_TXX9
 
 config SOC_TX4927
 	bool
-	select CEVT_R4K
-	select CSRC_R4K
 	select CEVT_TXX9
-	select DMA_NONCOHERENT
 	select HAS_TXX9_SERIAL
 	select HW_HAS_PCI
-	select IRQ_CPU
 	select IRQ_TXX9
 	select PCI_TX4927
-	select SWAP_IO_SPACE
-	select SYS_HAS_CPU_TX49XX
-	select SYS_SUPPORTS_32BIT_KERNEL
-	select SYS_SUPPORTS_64BIT_KERNEL
-	select SYS_SUPPORTS_LITTLE_ENDIAN
-	select SYS_SUPPORTS_BIG_ENDIAN
-	select SYS_SUPPORTS_KGDB
-	select GENERIC_HARDIRQS_NO__DO_IRQ
 	select GPIO_TXX9
 
 config SOC_TX4938
 	bool
-	select CEVT_R4K
-	select CSRC_R4K
 	select CEVT_TXX9
-	select DMA_NONCOHERENT
 	select HAS_TXX9_SERIAL
 	select HW_HAS_PCI
-	select IRQ_CPU
 	select IRQ_TXX9
 	select PCI_TX4927
-	select SWAP_IO_SPACE
-	select SYS_HAS_CPU_TX49XX
-	select SYS_SUPPORTS_32BIT_KERNEL
-	select SYS_SUPPORTS_64BIT_KERNEL
-	select SYS_SUPPORTS_LITTLE_ENDIAN
-	select SYS_SUPPORTS_BIG_ENDIAN
-	select SYS_SUPPORTS_KGDB
-	select GENERIC_HARDIRQS_NO__DO_IRQ
 	select GPIO_TXX9
 
 config TOSHIBA_FPCIB0
 	bool "FPCIB0 Backplane Support"
-	depends on PCI && (MACH_TX39XX || MACH_TX49XX)
+	depends on PCI && MACH_TXX9
 	select I8259
 
 config PICMG_PCI_BACKPLANE_DEFAULT
 	bool "Support for PICMG PCI Backplane"
-	depends on PCI && (MACH_TX39XX || MACH_TX49XX)
+	depends on PCI && MACH_TXX9
 	default y if !TOSHIBA_FPCIB0
 
 if TOSHIBA_RBTX4938
diff --git a/arch/mips/txx9/generic/Makefile b/arch/mips/txx9/generic/Makefile
index 9c120771e65f..9bb34af26b73 100644
--- a/arch/mips/txx9/generic/Makefile
+++ b/arch/mips/txx9/generic/Makefile
@@ -4,9 +4,9 @@
 
 obj-y	+= setup.o
 obj-$(CONFIG_PCI)	+= pci.o
+obj-$(CONFIG_SOC_TX3927)	+= setup_tx3927.o irq_tx3927.o
 obj-$(CONFIG_SOC_TX4927)	+= mem_tx4927.o setup_tx4927.o irq_tx4927.o
 obj-$(CONFIG_SOC_TX4938)	+= mem_tx4927.o setup_tx4938.o irq_tx4938.o
 obj-$(CONFIG_TOSHIBA_FPCIB0)	+= smsc_fdc37m81x.o
-obj-$(CONFIG_KGDB)	+= dbgio.o
 
 EXTRA_CFLAGS += -Werror
diff --git a/arch/mips/txx9/generic/dbgio.c b/arch/mips/txx9/generic/dbgio.c
deleted file mode 100644
index 33b9c672a322..000000000000
--- a/arch/mips/txx9/generic/dbgio.c
+++ /dev/null
@@ -1,48 +0,0 @@
-/*
- * linux/arch/mips/tx4938/common/dbgio.c
- *
- * kgdb interface for gdb
- *
- * Author: MontaVista Software, Inc.
- *         source@mvista.com
- *
- * Copyright 2005 MontaVista Software Inc.
- *
- *  This program is free software; you can redistribute it and/or modify it
- *  under the terms of the GNU General Public License as published by the
- *  Free Software Foundation; either version 2 of the License, or (at your
- *  option) any later version.
- *
- *  THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
- *  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
- *  IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
- *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
- *  BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
- *  OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
- *  ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
- *  TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
- *  USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- *  You should have received a copy of the GNU General Public License along
- *  with this program; if not, write to the Free Software Foundation, Inc.,
- *  675 Mass Ave, Cambridge, MA 02139, USA.
- *
- * Support for TX4938 in 2.6 - Hiroshi DOYU <Hiroshi_DOYU@montavista.co.jp>
- */
-
-#include <linux/types>
-
-extern u8 txx9_sio_kdbg_rd(void);
-extern int txx9_sio_kdbg_wr( u8 ch );
-
-u8 getDebugChar(void)
-{
-	return (txx9_sio_kdbg_rd());
-}
-
-int putDebugChar(u8 byte)
-{
-	return (txx9_sio_kdbg_wr(byte));
-}
-
diff --git a/arch/mips/txx9/generic/irq_tx3927.c b/arch/mips/txx9/generic/irq_tx3927.c
new file mode 100644
index 000000000000..c683f593eda2
--- /dev/null
+++ b/arch/mips/txx9/generic/irq_tx3927.c
@@ -0,0 +1,25 @@
+/*
+ * Common tx3927 irq handler
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright 2001 MontaVista Software Inc.
+ * Copyright (C) 2000-2001 Toshiba Corporation
+ */
+#include <linux/init.h>
+#include <asm/txx9irq.h>
+#include <asm/txx9/tx3927.h>
+
+void __init tx3927_irq_init(void)
+{
+	int i;
+
+	txx9_irq_init(TX3927_IRC_REG);
+	/* raise priority for timers, sio */
+	for (i = 0; i < TX3927_NR_TMR; i++)
+		txx9_irq_set_pri(TX3927_IR_TMR(i), 6);
+	for (i = 0; i < TX3927_NR_SIO; i++)
+		txx9_irq_set_pri(TX3927_IR_SIO(i), 7);
+}
diff --git a/arch/mips/txx9/generic/pci.c b/arch/mips/txx9/generic/pci.c
index 0b92d8c13208..7b637a7c0e66 100644
--- a/arch/mips/txx9/generic/pci.c
+++ b/arch/mips/txx9/generic/pci.c
@@ -386,3 +386,39 @@ int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
 {
 	return txx9_board_vec->pci_map_irq(dev, slot, pin);
 }
+
+char * (*txx9_board_pcibios_setup)(char *str) __devinitdata;
+
+char *__devinit txx9_pcibios_setup(char *str)
+{
+	if (txx9_board_pcibios_setup && !txx9_board_pcibios_setup(str))
+		return NULL;
+	if (!strcmp(str, "picmg")) {
+		/* PICMG compliant backplane (TOSHIBA JMB-PICMG-ATX
+		   (5V or 3.3V), JMB-PICMG-L2 (5V only), etc.) */
+		txx9_pci_option |= TXX9_PCI_OPT_PICMG;
+		return NULL;
+	} else if (!strcmp(str, "nopicmg")) {
+		/* non-PICMG compliant backplane (TOSHIBA
+		   RBHBK4100,RBHBK4200, Interface PCM-PCM05, etc.) */
+		txx9_pci_option &= ~TXX9_PCI_OPT_PICMG;
+		return NULL;
+	} else if (!strncmp(str, "clk=", 4)) {
+		char *val = str + 4;
+		txx9_pci_option &= ~TXX9_PCI_OPT_CLK_MASK;
+		if (strcmp(val, "33") == 0)
+			txx9_pci_option |= TXX9_PCI_OPT_CLK_33;
+		else if (strcmp(val, "66") == 0)
+			txx9_pci_option |= TXX9_PCI_OPT_CLK_66;
+		else /* "auto" */
+			txx9_pci_option |= TXX9_PCI_OPT_CLK_AUTO;
+		return NULL;
+	} else if (!strncmp(str, "err=", 4)) {
+		if (!strcmp(str + 4, "panic"))
+			txx9_pci_err_action = TXX9_PCI_ERR_PANIC;
+		else if (!strcmp(str + 4, "ignore"))
+			txx9_pci_err_action = TXX9_PCI_ERR_IGNORE;
+		return NULL;
+	}
+	return str;
+}
diff --git a/arch/mips/txx9/generic/setup.c b/arch/mips/txx9/generic/setup.c
index 8c60c78b9a9e..0afe94c48fb6 100644
--- a/arch/mips/txx9/generic/setup.c
+++ b/arch/mips/txx9/generic/setup.c
@@ -20,9 +20,13 @@
 #include <linux/clk.h>
 #include <linux/err.h>
 #include <linux/gpio.h>
+#include <linux/platform_device.h>
+#include <linux/serial_core.h>
 #include <asm/bootinfo.h>
 #include <asm/time.h>
+#include <asm/reboot.h>
 #include <asm/txx9/generic.h>
+#include <asm/txx9/pci.h>
 #ifdef CONFIG_CPU_TX49XX
 #include <asm/txx9/tx4938.h>
 #endif
@@ -187,6 +191,117 @@ char * __init prom_getcmdline(void)
 	return &(arcs_cmdline[0]);
 }
 
+static void __noreturn txx9_machine_halt(void)
+{
+	local_irq_disable();
+	clear_c0_status(ST0_IM);
+	while (1) {
+		if (cpu_wait) {
+			(*cpu_wait)();
+			if (cpu_has_counter) {
+				/*
+				 * Clear counter interrupt while it
+				 * breaks WAIT instruction even if
+				 * masked.
+				 */
+				write_c0_compare(0);
+			}
+		}
+	}
+}
+
+/* Watchdog support */
+void __init txx9_wdt_init(unsigned long base)
+{
+	struct resource res = {
+		.start	= base,
+		.end	= base + 0x100 - 1,
+		.flags	= IORESOURCE_MEM,
+	};
+	platform_device_register_simple("txx9wdt", -1, &res, 1);
+}
+
+/* SPI support */
+void __init txx9_spi_init(int busid, unsigned long base, int irq)
+{
+	struct resource res[] = {
+		{
+			.start	= base,
+			.end	= base + 0x20 - 1,
+			.flags	= IORESOURCE_MEM,
+		}, {
+			.start	= irq,
+			.flags	= IORESOURCE_IRQ,
+		},
+	};
+	platform_device_register_simple("spi_txx9", busid,
+					res, ARRAY_SIZE(res));
+}
+
+void __init txx9_ethaddr_init(unsigned int id, unsigned char *ethaddr)
+{
+	struct platform_device *pdev =
+		platform_device_alloc("tc35815-mac", id);
+	if (!pdev ||
+	    platform_device_add_data(pdev, ethaddr, 6) ||
+	    platform_device_add(pdev))
+		platform_device_put(pdev);
+}
+
+void __init txx9_sio_init(unsigned long baseaddr, int irq,
+			  unsigned int line, unsigned int sclk, int nocts)
+{
+#ifdef CONFIG_SERIAL_TXX9
+	struct uart_port req;
+
+	memset(&req, 0, sizeof(req));
+	req.line = line;
+	req.iotype = UPIO_MEM;
+	req.membase = ioremap(baseaddr, 0x24);
+	req.mapbase = baseaddr;
+	req.irq = irq;
+	if (!nocts)
+		req.flags |= UPF_BUGGY_UART /*HAVE_CTS_LINE*/;
+	if (sclk) {
+		req.flags |= UPF_MAGIC_MULTIPLIER /*USE_SCLK*/;
+		req.uartclk = sclk;
+	} else
+		req.uartclk = TXX9_IMCLK;
+	early_serial_txx9_setup(&req);
+#endif /* CONFIG_SERIAL_TXX9 */
+}
+
+#ifdef CONFIG_EARLY_PRINTK
+static void __init null_prom_putchar(char c)
+{
+}
+void (*txx9_prom_putchar)(char c) __initdata = null_prom_putchar;
+
+void __init prom_putchar(char c)
+{
+	txx9_prom_putchar(c);
+}
+
+static void __iomem *early_txx9_sio_port;
+
+static void __init early_txx9_sio_putchar(char c)
+{
+#define TXX9_SICISR	0x0c
+#define TXX9_SITFIFO	0x1c
+#define TXX9_SICISR_TXALS	0x00000002
+	while (!(__raw_readl(early_txx9_sio_port + TXX9_SICISR) &
+		 TXX9_SICISR_TXALS))
+		;
+	__raw_writel(c, early_txx9_sio_port + TXX9_SITFIFO);
+}
+
+void __init txx9_sio_putchar_init(unsigned long baseaddr)
+{
+	early_txx9_sio_port = ioremap(baseaddr, 0x24);
+	txx9_prom_putchar = early_txx9_sio_putchar;
+}
+#endif /* CONFIG_EARLY_PRINTK */
+
 /* wrappers */
 void __init plat_mem_setup(void)
 {
@@ -194,6 +309,15 @@ void __init plat_mem_setup(void)
 	ioport_resource.end = ~0UL;	/* no limit */
 	iomem_resource.start = 0;
 	iomem_resource.end = ~0UL;	/* no limit */
+
+	/* fallback restart/halt routines */
+	_machine_restart = (void (*)(char *))txx9_machine_halt;
+	_machine_halt = txx9_machine_halt;
+	pm_power_off = txx9_machine_halt;
+
+#ifdef CONFIG_PCI
+	pcibios_plat_setup = txx9_pcibios_setup;
+#endif
 	txx9_board_vec->mem_setup();
 }
 
@@ -204,6 +328,9 @@ void __init arch_init_irq(void)
 
 void __init plat_time_init(void)
 {
+#ifdef CONFIG_CPU_TX49XX
+	mips_hpt_frequency = txx9_cpu_clock / 2;
+#endif
 	txx9_board_vec->time_init();
 }
 
diff --git a/arch/mips/txx9/generic/setup_tx3927.c b/arch/mips/txx9/generic/setup_tx3927.c
new file mode 100644
index 000000000000..7bd963d37fc3
--- /dev/null
+++ b/arch/mips/txx9/generic/setup_tx3927.c
@@ -0,0 +1,130 @@
+/*
+ * TX3927 setup routines
+ * Based on linux/arch/mips/txx9/jmr3927/setup.c
+ *
+ * Copyright 2001 MontaVista Software Inc.
+ * Copyright (C) 2000-2001 Toshiba Corporation
+ * Copyright (C) 2007 Ralf Baechle (ralf@linux-mips.org)
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/init.h>
+#include <linux/ioport.h>
+#include <linux/delay.h>
+#include <linux/param.h>
+#include <linux/io.h>
+#include <asm/mipsregs.h>
+#include <asm/txx9irq.h>
+#include <asm/txx9tmr.h>
+#include <asm/txx9pio.h>
+#include <asm/txx9/generic.h>
+#include <asm/txx9/tx3927.h>
+
+void __init tx3927_wdt_init(void)
+{
+	txx9_wdt_init(TX3927_TMR_REG(2));
+}
+
+void __init tx3927_setup(void)
+{
+	int i;
+	unsigned int conf;
+
+	/* don't enable - see errata */
+	txx9_ccfg_toeon = 0;
+	if (strstr(prom_getcmdline(), "toeon") != NULL)
+		txx9_ccfg_toeon = 1;
+
+	txx9_reg_res_init(TX3927_REV_PCODE(), TX3927_REG_BASE,
+			  TX3927_REG_SIZE);
+
+	/* SDRAMC,ROMC are configured by PROM */
+	for (i = 0; i < 8; i++) {
+		if (!(tx3927_romcptr->cr[i] & 0x8))
+			continue;	/* disabled */
+		txx9_ce_res[i].start = (unsigned long)TX3927_ROMC_BA(i);
+		txx9_ce_res[i].end =
+			txx9_ce_res[i].start + TX3927_ROMC_SIZE(i) - 1;
+		request_resource(&iomem_resource, &txx9_ce_res[i]);
+	}
+
+	/* clocks */
+	txx9_gbus_clock = txx9_cpu_clock / 2;
+	/* change default value to udelay/mdelay take reasonable time */
+	loops_per_jiffy = txx9_cpu_clock / HZ / 2;
+
+	/* CCFG */
+	/* enable Timeout BusError */
+	if (txx9_ccfg_toeon)
+		tx3927_ccfgptr->ccfg |= TX3927_CCFG_TOE;
+
+	/* clear BusErrorOnWrite flag */
+	tx3927_ccfgptr->ccfg &= ~TX3927_CCFG_BEOW;
+	if (read_c0_conf() & TX39_CONF_WBON)
+		/* Disable PCI snoop */
+		tx3927_ccfgptr->ccfg &= ~TX3927_CCFG_PSNP;
+	else
+		/* Enable PCI SNOOP - with write through only */
+		tx3927_ccfgptr->ccfg |= TX3927_CCFG_PSNP;
+	/* do reset on watchdog */
+	tx3927_ccfgptr->ccfg |= TX3927_CCFG_WR;
+
+	printk(KERN_INFO "TX3927 -- CRIR:%08lx CCFG:%08lx PCFG:%08lx\n",
+	       tx3927_ccfgptr->crir,
+	       tx3927_ccfgptr->ccfg, tx3927_ccfgptr->pcfg);
+
+	/* TMR */
+	for (i = 0; i < TX3927_NR_TMR; i++)
+		txx9_tmr_init(TX3927_TMR_REG(i));
+
+	/* DMA */
+	tx3927_dmaptr->mcr = 0;
+	for (i = 0; i < ARRAY_SIZE(tx3927_dmaptr->ch); i++) {
+		/* reset channel */
+		tx3927_dmaptr->ch[i].ccr = TX3927_DMA_CCR_CHRST;
+		tx3927_dmaptr->ch[i].ccr = 0;
+	}
+	/* enable DMA */
+#ifdef __BIG_ENDIAN
+	tx3927_dmaptr->mcr = TX3927_DMA_MCR_MSTEN;
+#else
+	tx3927_dmaptr->mcr = TX3927_DMA_MCR_MSTEN | TX3927_DMA_MCR_LE;
+#endif
+
+	/* PIO */
+	__raw_writel(0, &tx3927_pioptr->maskcpu);
+	__raw_writel(0, &tx3927_pioptr->maskext);
+	txx9_gpio_init(TX3927_PIO_REG, 0, 16);
+
+	conf = read_c0_conf();
+	if (!(conf & TX39_CONF_ICE))
+		printk(KERN_INFO "TX3927 I-Cache disabled.\n");
+	if (!(conf & TX39_CONF_DCE))
+		printk(KERN_INFO "TX3927 D-Cache disabled.\n");
+	else if (!(conf & TX39_CONF_WBON))
+		printk(KERN_INFO "TX3927 D-Cache WriteThrough.\n");
+	else if (!(conf & TX39_CONF_CWFON))
+		printk(KERN_INFO "TX3927 D-Cache WriteBack.\n");
+	else
+		printk(KERN_INFO "TX3927 D-Cache WriteBack (CWF) .\n");
+}
+
+void __init tx3927_time_init(unsigned int evt_tmrnr, unsigned int src_tmrnr)
+{
+	txx9_clockevent_init(TX3927_TMR_REG(evt_tmrnr),
+			     TXX9_IRQ_BASE + TX3927_IR_TMR(evt_tmrnr),
+			     TXX9_IMCLK);
+	txx9_clocksource_init(TX3927_TMR_REG(src_tmrnr), TXX9_IMCLK);
+}
+
+void __init tx3927_sio_init(unsigned int sclk, unsigned int cts_mask)
+{
+	int i;
+
+	for (i = 0; i < 2; i++)
+		txx9_sio_init(TX3927_SIO_REG(i),
+			      TXX9_IRQ_BASE + TX3927_IR_SIO(i),
+			      i, sclk, (1 << i) & cts_mask);
+}
diff --git a/arch/mips/txx9/generic/setup_tx4927.c b/arch/mips/txx9/generic/setup_tx4927.c
index 89d6e28add93..f80d4b7a694d 100644
--- a/arch/mips/txx9/generic/setup_tx4927.c
+++ b/arch/mips/txx9/generic/setup_tx4927.c
@@ -13,7 +13,6 @@
 #include <linux/init.h>
 #include <linux/ioport.h>
 #include <linux/delay.h>
-#include <linux/serial_core.h>
 #include <linux/param.h>
 #include <asm/txx9irq.h>
 #include <asm/txx9tmr.h>
@@ -21,7 +20,7 @@
 #include <asm/txx9/generic.h>
 #include <asm/txx9/tx4927.h>
 
-void __init tx4927_wdr_init(void)
+static void __init tx4927_wdr_init(void)
 {
 	/* clear WatchDogReset (W1C) */
 	tx4927_ccfg_set(TX4927_CCFG_WDRST);
@@ -29,6 +28,11 @@ void __init tx4927_wdr_init(void)
 	tx4927_ccfg_set(TX4927_CCFG_WR);
 }
 
+void __init tx4927_wdt_init(void)
+{
+	txx9_wdt_init(TX4927_TMR_REG(2) & 0xfffffffffULL);
+}
+
 static struct resource tx4927_sdram_resource[4];
 
 void __init tx4927_setup(void)
@@ -173,22 +177,12 @@ void __init tx4927_time_init(unsigned int tmrnr)
 				     TXX9_IMCLK);
 }
 
-void __init tx4927_setup_serial(void)
+void __init tx4927_sio_init(unsigned int sclk, unsigned int cts_mask)
 {
-#ifdef CONFIG_SERIAL_TXX9
 	int i;
-	struct uart_port req;
-
-	for (i = 0; i < 2; i++) {
-		memset(&req, 0, sizeof(req));
-		req.line = i;
-		req.iotype = UPIO_MEM;
-		req.membase = (unsigned char __iomem *)TX4927_SIO_REG(i);
-		req.mapbase = TX4927_SIO_REG(i) & 0xfffffffffULL;
-		req.irq = TXX9_IRQ_BASE + TX4927_IR_SIO(i);
-		req.flags |= UPF_BUGGY_UART /*HAVE_CTS_LINE*/;
-		req.uartclk = TXX9_IMCLK;
-		early_serial_txx9_setup(&req);
-	}
-#endif /* CONFIG_SERIAL_TXX9 */
+
+	for (i = 0; i < 2; i++)
+		txx9_sio_init(TX4927_SIO_REG(i) & 0xfffffffffULL,
+			      TXX9_IRQ_BASE + TX4927_IR_SIO(i),
+			      i, sclk, (1 << i) & cts_mask);
 }
diff --git a/arch/mips/txx9/generic/setup_tx4938.c b/arch/mips/txx9/generic/setup_tx4938.c
index 317378d8579d..f3040b9ba059 100644
--- a/arch/mips/txx9/generic/setup_tx4938.c
+++ b/arch/mips/txx9/generic/setup_tx4938.c
@@ -13,7 +13,6 @@
 #include <linux/init.h>
 #include <linux/ioport.h>
 #include <linux/delay.h>
-#include <linux/serial_core.h>
 #include <linux/param.h>
 #include <asm/txx9irq.h>
 #include <asm/txx9tmr.h>
@@ -21,7 +20,7 @@
 #include <asm/txx9/generic.h>
 #include <asm/txx9/tx4938.h>
 
-void __init tx4938_wdr_init(void)
+static void __init tx4938_wdr_init(void)
 {
 	/* clear WatchDogReset (W1C) */
 	tx4938_ccfg_set(TX4938_CCFG_WDRST);
@@ -29,6 +28,11 @@ void __init tx4938_wdr_init(void)
 	tx4938_ccfg_set(TX4938_CCFG_WR);
 }
 
+void __init tx4938_wdt_init(void)
+{
+	txx9_wdt_init(TX4938_TMR_REG(2) & 0xfffffffffULL);
+}
+
 static struct resource tx4938_sdram_resource[4];
 static struct resource tx4938_sram_resource;
 
@@ -233,11 +237,9 @@ void __init tx4938_time_init(unsigned int tmrnr)
 				     TXX9_IMCLK);
 }
 
-void __init tx4938_setup_serial(void)
+void __init tx4938_sio_init(unsigned int sclk, unsigned int cts_mask)
 {
-#ifdef CONFIG_SERIAL_TXX9
 	int i;
-	struct uart_port req;
 	unsigned int ch_mask = 0;
 
 	if (__raw_readq(&tx4938_ccfgptr->pcfg) & TX4938_PCFG_ETH0_SEL)
@@ -245,15 +247,24 @@ void __init tx4938_setup_serial(void)
 	for (i = 0; i < 2; i++) {
 		if ((1 << i) & ch_mask)
 			continue;
-		memset(&req, 0, sizeof(req));
-		req.line = i;
-		req.iotype = UPIO_MEM;
-		req.membase = (unsigned char __iomem *)TX4938_SIO_REG(i);
-		req.mapbase = TX4938_SIO_REG(i) & 0xfffffffffULL;
-		req.irq = TXX9_IRQ_BASE + TX4938_IR_SIO(i);
-		req.flags |= UPF_BUGGY_UART /*HAVE_CTS_LINE*/;
-		req.uartclk = TXX9_IMCLK;
-		early_serial_txx9_setup(&req);
+		txx9_sio_init(TX4938_SIO_REG(i) & 0xfffffffffULL,
+			      TXX9_IRQ_BASE + TX4938_IR_SIO(i),
+			      i, sclk, (1 << i) & cts_mask);
 	}
-#endif /* CONFIG_SERIAL_TXX9 */
+}
+
+void __init tx4938_spi_init(int busid)
+{
+	txx9_spi_init(busid, TX4938_SPI_REG & 0xfffffffffULL,
+		      TXX9_IRQ_BASE + TX4938_IR_SPI);
+}
+
+void __init tx4938_ethaddr_init(unsigned char *addr0, unsigned char *addr1)
+{
+	u64 pcfg = __raw_readq(&tx4938_ccfgptr->pcfg);
+
+	if (addr0 && (pcfg & TX4938_PCFG_ETH0_SEL))
+		txx9_ethaddr_init(TXX9_IRQ_BASE + TX4938_IR_ETH0, addr0);
+	if (addr1 && (pcfg & TX4938_PCFG_ETH1_SEL))
+		txx9_ethaddr_init(TXX9_IRQ_BASE + TX4938_IR_ETH1, addr1);
 }
diff --git a/arch/mips/txx9/generic/smsc_fdc37m81x.c b/arch/mips/txx9/generic/smsc_fdc37m81x.c
index 69e487467fa5..a2b2d62d88e3 100644
--- a/arch/mips/txx9/generic/smsc_fdc37m81x.c
+++ b/arch/mips/txx9/generic/smsc_fdc37m81x.c
@@ -15,8 +15,6 @@
 #include <asm/io.h>
 #include <asm/txx9/smsc_fdc37m81x.h>
 
-#define DEBUG
-
 /* Common Registers */
 #define SMSC_FDC37M81X_CONFIG_INDEX  0x00
 #define SMSC_FDC37M81X_CONFIG_DATA   0x01
@@ -55,7 +53,7 @@
 #define SMSC_FDC37M81X_CONFIG_EXIT   0xaa
 #define SMSC_FDC37M81X_CHIP_ID       0x4d
 
-static unsigned long g_smsc_fdc37m81x_base = 0;
+static unsigned long g_smsc_fdc37m81x_base;
 
 static inline unsigned char smsc_fdc37m81x_rd(unsigned char index)
 {
@@ -107,7 +105,8 @@ unsigned long __init smsc_fdc37m81x_init(unsigned long port)
 	u8 chip_id;
 
 	if (g_smsc_fdc37m81x_base)
-		printk("smsc_fdc37m81x_init() stepping on old base=0x%0*lx\n",
+		printk(KERN_WARNING "%s: stepping on old base=0x%0*lx\n",
+		       __func__,
 		       field, g_smsc_fdc37m81x_base);
 
 	g_smsc_fdc37m81x_base = port;
@@ -118,7 +117,7 @@ unsigned long __init smsc_fdc37m81x_init(unsigned long port)
 	if (chip_id == SMSC_FDC37M81X_CHIP_ID)
 		smsc_fdc37m81x_config_end();
 	else {
-		printk("smsc_fdc37m81x_init() unknow chip id 0x%02x\n",
+		printk(KERN_WARNING "%s: unknow chip id 0x%02x\n", __func__,
 		       chip_id);
 		g_smsc_fdc37m81x_base = 0;
 	}
@@ -127,22 +126,23 @@ unsigned long __init smsc_fdc37m81x_init(unsigned long port)
 }
 
 #ifdef DEBUG
-void smsc_fdc37m81x_config_dump_one(char *key, u8 dev, u8 reg)
+static void smsc_fdc37m81x_config_dump_one(const char *key, u8 dev, u8 reg)
 {
-	printk("%s: dev=0x%02x reg=0x%02x val=0x%02x\n", key, dev, reg,
+	printk(KERN_INFO "%s: dev=0x%02x reg=0x%02x val=0x%02x\n",
+	       key, dev, reg,
 	       smsc_fdc37m81x_rd(reg));
 }
 
 void smsc_fdc37m81x_config_dump(void)
 {
 	u8 orig;
-	char *fname = "smsc_fdc37m81x_config_dump()";
+	const char *fname = __func__;
 
 	smsc_fdc37m81x_config_beg();
 
 	orig = smsc_fdc37m81x_rd(SMSC_FDC37M81X_DNUM);
 
-	printk("%s: common\n", fname);
+	printk(KERN_INFO "%s: common\n", fname);
 	smsc_fdc37m81x_config_dump_one(fname, SMSC_FDC37M81X_NONE,
 				       SMSC_FDC37M81X_DNUM);
 	smsc_fdc37m81x_config_dump_one(fname, SMSC_FDC37M81X_NONE,
@@ -154,7 +154,7 @@ void smsc_fdc37m81x_config_dump(void)
 	smsc_fdc37m81x_config_dump_one(fname, SMSC_FDC37M81X_NONE,
 				       SMSC_FDC37M81X_PMGT);
 
-	printk("%s: keyboard\n", fname);
+	printk(KERN_INFO "%s: keyboard\n", fname);
 	smsc_dc37m81x_wr(SMSC_FDC37M81X_DNUM, SMSC_FDC37M81X_KBD);
 	smsc_fdc37m81x_config_dump_one(fname, SMSC_FDC37M81X_KBD,
 				       SMSC_FDC37M81X_ACTIVE);
diff --git a/arch/mips/txx9/jmr3927/Makefile b/arch/mips/txx9/jmr3927/Makefile
index ba292c945669..20d61ac543e5 100644
--- a/arch/mips/txx9/jmr3927/Makefile
+++ b/arch/mips/txx9/jmr3927/Makefile
@@ -3,6 +3,5 @@
 #
 
 obj-y	+= prom.o irq.o setup.o
-obj-$(CONFIG_KGDB)	+= kgdb_io.o
 
 EXTRA_CFLAGS += -Werror
diff --git a/arch/mips/txx9/jmr3927/irq.c b/arch/mips/txx9/jmr3927/irq.c
index 070c9a115e57..6ec626c9473f 100644
--- a/arch/mips/txx9/jmr3927/irq.c
+++ b/arch/mips/txx9/jmr3927/irq.c
@@ -30,15 +30,11 @@
  *  675 Mass Ave, Cambridge, MA 02139, USA.
  */
 #include <linux/init.h>
-#include <linux/sched.h>
 #include <linux/types.h>
 #include <linux/interrupt.h>
 
 #include <asm/io.h>
 #include <asm/mipsregs.h>
-#include <asm/system.h>
-
-#include <asm/processor.h>
 #include <asm/txx9/generic.h>
 #include <asm/txx9/jmr3927.h>
 
@@ -46,13 +42,6 @@
 #error JMR3927_IRQ_END > NR_IRQS
 #endif
 
-static unsigned char irc_level[TX3927_NUM_IR] = {
-	5, 5, 5, 5, 5, 5,	/* INT[5:0] */
-	7, 7,			/* SIO */
-	5, 5, 5, 0, 0,		/* DMA, PIO, PCI */
-	6, 6, 6			/* TMR */
-};
-
 /*
  * CP0_STATUS is a thread's resource (saved/restored on context switch).
  * So disable_irq/enable_irq MUST handle IOC/IRC registers.
@@ -103,26 +92,18 @@ static int jmr3927_irq_dispatch(int pending)
 	return irq;
 }
 
-#ifdef CONFIG_PCI
-static irqreturn_t jmr3927_pcierr_interrupt(int irq, void *dev_id)
-{
-	printk(KERN_WARNING "PCI error interrupt (irq 0x%x).\n", irq);
-	printk(KERN_WARNING "pcistat:%02x, lbstat:%04lx\n",
-	       tx3927_pcicptr->pcistat, tx3927_pcicptr->lbstat);
-
-	return IRQ_HANDLED;
-}
-static struct irqaction pcierr_action = {
-	.handler = jmr3927_pcierr_interrupt,
-	.mask = CPU_MASK_NONE,
-	.name = "PCI error",
+static struct irq_chip jmr3927_irq_ioc = {
+	.name = "jmr3927_ioc",
+	.ack = mask_irq_ioc,
+	.mask = mask_irq_ioc,
+	.mask_ack = mask_irq_ioc,
+	.unmask = unmask_irq_ioc,
 };
-#endif
-
-static void __init jmr3927_irq_init(void);
 
 void __init jmr3927_irq_setup(void)
 {
+	int i;
+
 	txx9_irq_dispatch = jmr3927_irq_dispatch;
 	/* Now, interrupt control disabled, */
 	/* all IRC interrupts are masked, */
@@ -138,34 +119,10 @@ void __init jmr3927_irq_setup(void)
 	/* clear PCI Reset interrupts */
 	jmr3927_ioc_reg_out(0, JMR3927_IOC_RESET_ADDR);
 
-	jmr3927_irq_init();
+	tx3927_irq_init();
+	for (i = JMR3927_IRQ_IOC; i < JMR3927_IRQ_IOC + JMR3927_NR_IRQ_IOC; i++)
+		set_irq_chip_and_handler(i, &jmr3927_irq_ioc, handle_level_irq);
 
 	/* setup IOC interrupt 1 (PCI, MODEM) */
 	set_irq_chained_handler(JMR3927_IRQ_IOCINT, handle_simple_irq);
-
-#ifdef CONFIG_PCI
-	setup_irq(JMR3927_IRQ_IRC_PCI, &pcierr_action);
-#endif
-
-	/* enable all CPU interrupt bits. */
-	set_c0_status(ST0_IM);	/* IE bit is still 0. */
-}
-
-static struct irq_chip jmr3927_irq_ioc = {
-	.name = "jmr3927_ioc",
-	.ack = mask_irq_ioc,
-	.mask = mask_irq_ioc,
-	.mask_ack = mask_irq_ioc,
-	.unmask = unmask_irq_ioc,
-};
-
-static void __init jmr3927_irq_init(void)
-{
-	u32 i;
-
-	txx9_irq_init(TX3927_IRC_REG);
-	for (i = 0; i < TXx9_MAX_IR; i++)
-		txx9_irq_set_pri(i, irc_level[i]);
-	for (i = JMR3927_IRQ_IOC; i < JMR3927_IRQ_IOC + JMR3927_NR_IRQ_IOC; i++)
-		set_irq_chip_and_handler(i, &jmr3927_irq_ioc, handle_level_irq);
 }
diff --git a/arch/mips/txx9/jmr3927/kgdb_io.c b/arch/mips/txx9/jmr3927/kgdb_io.c
deleted file mode 100644
index 5bd757e56f79..000000000000
--- a/arch/mips/txx9/jmr3927/kgdb_io.c
+++ /dev/null
@@ -1,105 +0,0 @@
-/*
- * BRIEF MODULE DESCRIPTION
- *	Low level uart routines to directly access a TX[34]927 SIO.
- *
- * Copyright 2001 MontaVista Software Inc.
- * Author: MontaVista Software, Inc.
- *         	ahennessy@mvista.com or source@mvista.com
- *
- * Based on arch/mips/ddb5xxx/ddb5477/kgdb_io.c
- *
- * Copyright (C) 2000-2001 Toshiba Corporation
- *
- *  This program is free software; you can redistribute  it and/or modify it
- *  under  the terms of  the GNU General  Public License as published by the
- *  Free Software Foundation;  either version 2 of the  License, or (at your
- *  option) any later version.
- *
- *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
- *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
- *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
- *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
- *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
- *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
- *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- *  You should have received a copy of the  GNU General Public License along
- *  with this program; if not, write  to the Free Software Foundation, Inc.,
- *  675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#include <asm/txx9/jmr3927.h>
-
-#define TIMEOUT       0xffffff
-
-static int remoteDebugInitialized = 0;
-static void debugInit(int baud);
-
-int putDebugChar(unsigned char c)
-{
-        int i = 0;
-
-	if (!remoteDebugInitialized) {
-		remoteDebugInitialized = 1;
-		debugInit(38400);
-	}
-
-        do {
-            slow_down();
-            i++;
-            if (i>TIMEOUT) {
-                break;
-            }
-        } while (!(tx3927_sioptr(0)->cisr & TXx927_SICISR_TXALS));
-	tx3927_sioptr(0)->tfifo = c;
-
-	return 1;
-}
-
-unsigned char getDebugChar(void)
-{
-        int i = 0;
-	int dicr;
-	char c;
-
-	if (!remoteDebugInitialized) {
-		remoteDebugInitialized = 1;
-		debugInit(38400);
-	}
-
-	/* diable RX int. */
-	dicr = tx3927_sioptr(0)->dicr;
-	tx3927_sioptr(0)->dicr = 0;
-
-        do {
-            slow_down();
-            i++;
-            if (i>TIMEOUT) {
-                break;
-            }
-        } while (tx3927_sioptr(0)->disr & TXx927_SIDISR_UVALID)
-		;
-	c = tx3927_sioptr(0)->rfifo;
-
-	/* clear RX int. status */
-	tx3927_sioptr(0)->disr &= ~TXx927_SIDISR_RDIS;
-	/* enable RX int. */
-	tx3927_sioptr(0)->dicr = dicr;
-
-	return c;
-}
-
-static void debugInit(int baud)
-{
-	tx3927_sioptr(0)->lcr = 0x020;
-	tx3927_sioptr(0)->dicr = 0;
-	tx3927_sioptr(0)->disr = 0x4100;
-	tx3927_sioptr(0)->cisr = 0x014;
-	tx3927_sioptr(0)->fcr = 0;
-	tx3927_sioptr(0)->flcr = 0x02;
-	tx3927_sioptr(0)->bgr = ((JMR3927_BASE_BAUD + baud / 2) / baud) |
-		TXx927_SIBGR_BCLK_T0;
-}
diff --git a/arch/mips/txx9/jmr3927/prom.c b/arch/mips/txx9/jmr3927/prom.c
index 2cadb423face..70c4c8ec3e84 100644
--- a/arch/mips/txx9/jmr3927/prom.c
+++ b/arch/mips/txx9/jmr3927/prom.c
@@ -36,41 +36,18 @@
  *  675 Mass Ave, Cambridge, MA 02139, USA.
  */
 #include <linux/init.h>
+#include <linux/kernel.h>
 #include <asm/bootinfo.h>
 #include <asm/txx9/generic.h>
 #include <asm/txx9/jmr3927.h>
 
-#define TIMEOUT       0xffffff
-
-void
-prom_putchar(char c)
-{
-        int i = 0;
-
-        do {
-            i++;
-            if (i>TIMEOUT)
-                break;
-        } while (!(tx3927_sioptr(1)->cisr & TXx927_SICISR_TXALS));
-	tx3927_sioptr(1)->tfifo = c;
-	return;
-}
-
-void
-puts(const char *cp)
-{
-    while (*cp)
-	prom_putchar(*cp++);
-    prom_putchar('\r');
-    prom_putchar('\n');
-}
-
 void __init jmr3927_prom_init(void)
 {
 	/* CCFG */
 	if ((tx3927_ccfgptr->ccfg & TX3927_CCFG_TLBOFF) == 0)
-		puts("Warning: TX3927 TLB off\n");
+		printk(KERN_ERR "TX3927 TLB off\n");
 
 	prom_init_cmdline();
 	add_memory_region(0, JMR3927_SDRAM_SIZE, BOOT_MEM_RAM);
+	txx9_sio_putchar_init(TX3927_SIO_REG(1));
 }
diff --git a/arch/mips/txx9/jmr3927/setup.c b/arch/mips/txx9/jmr3927/setup.c
index 03647ebe4130..87db41be8a56 100644
--- a/arch/mips/txx9/jmr3927/setup.c
+++ b/arch/mips/txx9/jmr3927/setup.c
@@ -32,27 +32,18 @@
 #include <linux/types.h>
 #include <linux/ioport.h>
 #include <linux/delay.h>
-#include <linux/pm.h>
 #include <linux/platform_device.h>
 #include <linux/gpio.h>
-#ifdef CONFIG_SERIAL_TXX9
-#include <linux/serial_core.h>
-#endif
-#include <asm/txx9tmr.h>
-#include <asm/txx9pio.h>
 #include <asm/reboot.h>
+#include <asm/txx9pio.h>
 #include <asm/txx9/generic.h>
 #include <asm/txx9/pci.h>
 #include <asm/txx9/jmr3927.h>
 #include <asm/mipsregs.h>
 
-extern void puts(const char *cp);
-
-/* don't enable - see errata */
-static int jmr3927_ccfg_toeon;
-
-static inline void do_reset(void)
+static void jmr3927_machine_restart(char *command)
 {
+	local_irq_disable();
 #if 1	/* Resetting PCI bus */
 	jmr3927_ioc_reg_out(0, JMR3927_IOC_RESET_ADDR);
 	jmr3927_ioc_reg_out(JMR3927_IOC_RESET_PCI, JMR3927_IOC_RESET_ADDR);
@@ -61,33 +52,13 @@ static inline void do_reset(void)
 	jmr3927_ioc_reg_out(0, JMR3927_IOC_RESET_ADDR);
 #endif
 	jmr3927_ioc_reg_out(JMR3927_IOC_RESET_CPU, JMR3927_IOC_RESET_ADDR);
-}
-
-static void jmr3927_machine_restart(char *command)
-{
-	local_irq_disable();
-	puts("Rebooting...");
-	do_reset();
-}
-
-static void jmr3927_machine_halt(void)
-{
-	puts("JMR-TX3927 halted.\n");
-	while (1);
-}
-
-static void jmr3927_machine_power_off(void)
-{
-	puts("JMR-TX3927 halted. Please turn off the power.\n");
-	while (1);
+	/* fallback */
+	(*_machine_halt)();
 }
 
 static void __init jmr3927_time_init(void)
 {
-	txx9_clockevent_init(TX3927_TMR_REG(0),
-			     TXX9_IRQ_BASE + JMR3927_IRQ_IRC_TMR(0),
-			     JMR3927_IMCLK);
-	txx9_clocksource_init(TX3927_TMR_REG(1), JMR3927_IMCLK);
+	tx3927_time_init(0, 1);
 }
 
 #define DO_WRITE_THROUGH
@@ -102,11 +73,6 @@ static void __init jmr3927_mem_setup(void)
 	set_io_port_base(JMR3927_PORT_BASE + JMR3927_PCIIO);
 
 	_machine_restart = jmr3927_machine_restart;
-	_machine_halt = jmr3927_machine_halt;
-	pm_power_off = jmr3927_machine_power_off;
-
-	/* Reboot on panic */
-	panic_timeout = 180;
 
 	/* cache setup */
 	{
@@ -125,7 +91,8 @@ static void __init jmr3927_mem_setup(void)
 #endif
 
 		conf = read_c0_conf();
-		conf &= ~(TX39_CONF_ICE | TX39_CONF_DCE | TX39_CONF_WBON | TX39_CONF_CWFON);
+		conf &= ~(TX39_CONF_ICE | TX39_CONF_DCE |
+			  TX39_CONF_WBON | TX39_CONF_CWFON);
 		conf |= mips_ic_disable ? 0 : TX39_CONF_ICE;
 		conf |= mips_dc_disable ? 0 : TX39_CONF_DCE;
 		conf |= mips_config_wbon ? TX39_CONF_WBON : 0;
@@ -138,47 +105,14 @@ static void __init jmr3927_mem_setup(void)
 	/* initialize board */
 	jmr3927_board_init();
 
-	argptr = prom_getcmdline();
-
-	if ((argptr = strstr(argptr, "toeon")) != NULL)
-		jmr3927_ccfg_toeon = 1;
-	argptr = prom_getcmdline();
-	if ((argptr = strstr(argptr, "ip=")) == NULL) {
-		argptr = prom_getcmdline();
-		strcat(argptr, " ip=bootp");
-	}
-
-#ifdef CONFIG_SERIAL_TXX9
-	{
-		extern int early_serial_txx9_setup(struct uart_port *port);
-		int i;
-		struct uart_port req;
-		for(i = 0; i < 2; i++) {
-			memset(&req, 0, sizeof(req));
-			req.line = i;
-			req.iotype = UPIO_MEM;
-			req.membase = (unsigned char __iomem *)TX3927_SIO_REG(i);
-			req.mapbase = TX3927_SIO_REG(i);
-			req.irq = i == 0 ?
-				JMR3927_IRQ_IRC_SIO0 : JMR3927_IRQ_IRC_SIO1;
-			if (i == 0)
-				req.flags |= UPF_BUGGY_UART /*HAVE_CTS_LINE*/;
-			req.uartclk = JMR3927_IMCLK;
-			early_serial_txx9_setup(&req);
-		}
-	}
+	tx3927_sio_init(0, 1 << 1); /* ch1: noCTS */
 #ifdef CONFIG_SERIAL_TXX9_CONSOLE
 	argptr = prom_getcmdline();
-	if ((argptr = strstr(argptr, "console=")) == NULL) {
-		argptr = prom_getcmdline();
+	if (!strstr(argptr, "console="))
 		strcat(argptr, " console=ttyS1,115200");
-	}
-#endif
 #endif
 }
 
-static void tx3927_setup(void);
-
 static void __init jmr3927_pci_setup(void)
 {
 #ifdef CONFIG_PCI
@@ -199,32 +133,13 @@ static void __init jmr3927_pci_setup(void)
 		jmr3927_ioc_reg_out(0, JMR3927_IOC_RESET_ADDR);
 	}
 	tx3927_pcic_setup(c, JMR3927_SDRAM_SIZE, extarb);
+	tx3927_setup_pcierr_irq();
 #endif /* CONFIG_PCI */
 }
 
 static void __init jmr3927_board_init(void)
 {
-	tx3927_setup();
-	jmr3927_pci_setup();
-
-	/* SIO0 DTR on */
-	jmr3927_ioc_reg_out(0, JMR3927_IOC_DTR_ADDR);
-
-	jmr3927_led_set(0);
-
-	printk("JMR-TX3927 (Rev %d) --- IOC(Rev %d) DIPSW:%d,%d,%d,%d\n",
-	       jmr3927_ioc_reg_in(JMR3927_IOC_BREV_ADDR) & JMR3927_REV_MASK,
-	       jmr3927_ioc_reg_in(JMR3927_IOC_REV_ADDR) & JMR3927_REV_MASK,
-	       jmr3927_dipsw1(), jmr3927_dipsw2(),
-	       jmr3927_dipsw3(), jmr3927_dipsw4());
-}
-
-static void __init tx3927_setup(void)
-{
-	int i;
-
 	txx9_cpu_clock = JMR3927_CORECLK;
-	txx9_gbus_clock = JMR3927_GBUSCLK;
 	/* SDRAMC are configured by PROM */
 
 	/* ROMC */
@@ -233,74 +148,32 @@ static void __init tx3927_setup(void)
 	tx3927_romcptr->cr[3] = JMR3927_ROMCE3 | 0x0003f698;
 	tx3927_romcptr->cr[5] = JMR3927_ROMCE5 | 0x0000f218;
 
-	/* CCFG */
-	/* enable Timeout BusError */
-	if (jmr3927_ccfg_toeon)
-		tx3927_ccfgptr->ccfg |= TX3927_CCFG_TOE;
-
-	/* clear BusErrorOnWrite flag */
-	tx3927_ccfgptr->ccfg &= ~TX3927_CCFG_BEOW;
-	/* Disable PCI snoop */
-	tx3927_ccfgptr->ccfg &= ~TX3927_CCFG_PSNP;
-	/* do reset on watchdog */
-	tx3927_ccfgptr->ccfg |= TX3927_CCFG_WR;
-
-#ifdef DO_WRITE_THROUGH
-	/* Enable PCI SNOOP - with write through only */
-	tx3927_ccfgptr->ccfg |= TX3927_CCFG_PSNP;
-#endif
-
 	/* Pin selection */
 	tx3927_ccfgptr->pcfg &= ~TX3927_PCFG_SELALL;
 	tx3927_ccfgptr->pcfg |=
 		TX3927_PCFG_SELSIOC(0) | TX3927_PCFG_SELSIO_ALL |
 		(TX3927_PCFG_SELDMA_ALL & ~TX3927_PCFG_SELDMA(1));
 
-	printk("TX3927 -- CRIR:%08lx CCFG:%08lx PCFG:%08lx\n",
-	       tx3927_ccfgptr->crir,
-	       tx3927_ccfgptr->ccfg, tx3927_ccfgptr->pcfg);
-
-	/* TMR */
-	for (i = 0; i < TX3927_NR_TMR; i++)
-		txx9_tmr_init(TX3927_TMR_REG(i));
-
-	/* DMA */
-	tx3927_dmaptr->mcr = 0;
-	for (i = 0; i < ARRAY_SIZE(tx3927_dmaptr->ch); i++) {
-		/* reset channel */
-		tx3927_dmaptr->ch[i].ccr = TX3927_DMA_CCR_CHRST;
-		tx3927_dmaptr->ch[i].ccr = 0;
-	}
-	/* enable DMA */
-#ifdef __BIG_ENDIAN
-	tx3927_dmaptr->mcr = TX3927_DMA_MCR_MSTEN;
-#else
-	tx3927_dmaptr->mcr = TX3927_DMA_MCR_MSTEN | TX3927_DMA_MCR_LE;
-#endif
+	tx3927_setup();
 
-	/* PIO */
 	/* PIO[15:12] connected to LEDs */
 	__raw_writel(0x0000f000, &tx3927_pioptr->dir);
-	__raw_writel(0, &tx3927_pioptr->maskcpu);
-	__raw_writel(0, &tx3927_pioptr->maskext);
-	txx9_gpio_init(TX3927_PIO_REG, 0, 16);
 	gpio_request(11, "dipsw1");
 	gpio_request(10, "dipsw2");
-	{
-		unsigned int conf;
 
-	conf = read_c0_conf();
-               if (!(conf & TX39_CONF_ICE))
-                       printk("TX3927 I-Cache disabled.\n");
-               if (!(conf & TX39_CONF_DCE))
-                       printk("TX3927 D-Cache disabled.\n");
-               else if (!(conf & TX39_CONF_WBON))
-                       printk("TX3927 D-Cache WriteThrough.\n");
-               else if (!(conf & TX39_CONF_CWFON))
-                       printk("TX3927 D-Cache WriteBack.\n");
-               else
-                       printk("TX3927 D-Cache WriteBack (CWF) .\n");
-	}
+	jmr3927_pci_setup();
+
+	/* SIO0 DTR on */
+	jmr3927_ioc_reg_out(0, JMR3927_IOC_DTR_ADDR);
+
+	jmr3927_led_set(0);
+
+	printk(KERN_INFO
+	       "JMR-TX3927 (Rev %d) --- IOC(Rev %d) DIPSW:%d,%d,%d,%d\n",
+	       jmr3927_ioc_reg_in(JMR3927_IOC_BREV_ADDR) & JMR3927_REV_MASK,
+	       jmr3927_ioc_reg_in(JMR3927_IOC_REV_ADDR) & JMR3927_REV_MASK,
+	       jmr3927_dipsw1(), jmr3927_dipsw2(),
+	       jmr3927_dipsw3(), jmr3927_dipsw4());
 }
 
 /* This trick makes rtc-ds1742 driver usable as is. */
@@ -316,42 +189,21 @@ static unsigned long jmr3927_swizzle_addr_b(unsigned long port)
 #endif
 }
 
-static int __init jmr3927_rtc_init(void)
+static void __init jmr3927_rtc_init(void)
 {
 	static struct resource __initdata res = {
 		.start	= JMR3927_IOC_NVRAMB_ADDR - IO_BASE,
 		.end	= JMR3927_IOC_NVRAMB_ADDR - IO_BASE + 0x800 - 1,
 		.flags	= IORESOURCE_MEM,
 	};
-	struct platform_device *dev;
-	dev = platform_device_register_simple("rtc-ds1742", -1, &res, 1);
-	return IS_ERR(dev) ? PTR_ERR(dev) : 0;
-}
-
-/* Watchdog support */
-
-static int __init txx9_wdt_init(unsigned long base)
-{
-	struct resource res = {
-		.start	= base,
-		.end	= base + 0x100 - 1,
-		.flags	= IORESOURCE_MEM,
-	};
-	struct platform_device *dev =
-		platform_device_register_simple("txx9wdt", -1, &res, 1);
-	return IS_ERR(dev) ? PTR_ERR(dev) : 0;
-}
-
-static int __init jmr3927_wdt_init(void)
-{
-	return txx9_wdt_init(TX3927_TMR_REG(2));
+	platform_device_register_simple("rtc-ds1742", -1, &res, 1);
 }
 
 static void __init jmr3927_device_init(void)
 {
 	__swizzle_addr_b = jmr3927_swizzle_addr_b;
 	jmr3927_rtc_init();
-	jmr3927_wdt_init();
+	tx3927_wdt_init();
 }
 
 struct txx9_board_vec jmr3927_vec __initdata = {
diff --git a/arch/mips/txx9/rbtx4927/irq.c b/arch/mips/txx9/rbtx4927/irq.c
index cd748a930328..00cd5231da30 100644
--- a/arch/mips/txx9/rbtx4927/irq.c
+++ b/arch/mips/txx9/rbtx4927/irq.c
@@ -27,85 +27,86 @@
  *  675 Mass Ave, Cambridge, MA 02139, USA.
  */
 /*
-IRQ  Device
-00   RBTX4927-ISA/00
-01   RBTX4927-ISA/01 PS2/Keyboard
-02   RBTX4927-ISA/02 Cascade RBTX4927-ISA (irqs 8-15)
-03   RBTX4927-ISA/03
-04   RBTX4927-ISA/04
-05   RBTX4927-ISA/05
-06   RBTX4927-ISA/06
-07   RBTX4927-ISA/07
-08   RBTX4927-ISA/08
-09   RBTX4927-ISA/09
-10   RBTX4927-ISA/10
-11   RBTX4927-ISA/11
-12   RBTX4927-ISA/12 PS2/Mouse (not supported at this time)
-13   RBTX4927-ISA/13
-14   RBTX4927-ISA/14 IDE
-15   RBTX4927-ISA/15
-
-16   TX4927-CP0/00 Software 0
-17   TX4927-CP0/01 Software 1
-18   TX4927-CP0/02 Cascade TX4927-CP0
-19   TX4927-CP0/03 Multiplexed -- do not use
-20   TX4927-CP0/04 Multiplexed -- do not use
-21   TX4927-CP0/05 Multiplexed -- do not use
-22   TX4927-CP0/06 Multiplexed -- do not use
-23   TX4927-CP0/07 CPU TIMER
-
-24   TX4927-PIC/00
-25   TX4927-PIC/01
-26   TX4927-PIC/02
-27   TX4927-PIC/03 Cascade RBTX4927-IOC
-28   TX4927-PIC/04
-29   TX4927-PIC/05 RBTX4927 RTL-8019AS ethernet
-30   TX4927-PIC/06
-31   TX4927-PIC/07
-32   TX4927-PIC/08 TX4927 SerialIO Channel 0
-33   TX4927-PIC/09 TX4927 SerialIO Channel 1
-34   TX4927-PIC/10
-35   TX4927-PIC/11
-36   TX4927-PIC/12
-37   TX4927-PIC/13
-38   TX4927-PIC/14
-39   TX4927-PIC/15
-40   TX4927-PIC/16 TX4927 PCI PCI-C
-41   TX4927-PIC/17
-42   TX4927-PIC/18
-43   TX4927-PIC/19
-44   TX4927-PIC/20
-45   TX4927-PIC/21
-46   TX4927-PIC/22 TX4927 PCI PCI-ERR
-47   TX4927-PIC/23 TX4927 PCI PCI-PMA (not used)
-48   TX4927-PIC/24
-49   TX4927-PIC/25
-50   TX4927-PIC/26
-51   TX4927-PIC/27
-52   TX4927-PIC/28
-53   TX4927-PIC/29
-54   TX4927-PIC/30
-55   TX4927-PIC/31
-
-56 RBTX4927-IOC/00 FPCIB0 PCI-D PJ4/A PJ5/B SB/C PJ6/D PJ7/A (SouthBridge/NotUsed)        [RTL-8139=PJ4]
-57 RBTX4927-IOC/01 FPCIB0 PCI-C PJ4/D PJ5/A SB/B PJ6/C PJ7/D (SouthBridge/NotUsed)        [RTL-8139=PJ5]
-58 RBTX4927-IOC/02 FPCIB0 PCI-B PJ4/C PJ5/D SB/A PJ6/B PJ7/C (SouthBridge/IDE/pin=1,INTR) [RTL-8139=NotSupported]
-59 RBTX4927-IOC/03 FPCIB0 PCI-A PJ4/B PJ5/C SB/D PJ6/A PJ7/B (SouthBridge/USB/pin=4)      [RTL-8139=PJ6]
-60 RBTX4927-IOC/04
-61 RBTX4927-IOC/05
-62 RBTX4927-IOC/06
-63 RBTX4927-IOC/07
-
-NOTES:
-SouthBridge/INTR is mapped to SouthBridge/A=PCI-B/#58
-SouthBridge/ISA/pin=0 no pci irq used by this device
-SouthBridge/IDE/pin=1 no pci irq used by this device, using INTR via ISA IRQ14
-SouthBridge/USB/pin=4 using pci irq SouthBridge/D=PCI-A=#59
-SouthBridge/PMC/pin=0 no pci irq used by this device
-SuperIO/PS2/Keyboard, using INTR via ISA IRQ1
-SuperIO/PS2/Mouse, using INTR via ISA IRQ12 (mouse not currently supported)
-JP7 is not bus master -- do NOT use -- only 4 pci bus master's allowed -- SouthBridge, JP4, JP5, JP6
-*/
+ * I8259A_IRQ_BASE+00
+ * I8259A_IRQ_BASE+01 PS2/Keyboard
+ * I8259A_IRQ_BASE+02 Cascade RBTX4927-ISA (irqs 8-15)
+ * I8259A_IRQ_BASE+03
+ * I8259A_IRQ_BASE+04
+ * I8259A_IRQ_BASE+05
+ * I8259A_IRQ_BASE+06
+ * I8259A_IRQ_BASE+07
+ * I8259A_IRQ_BASE+08
+ * I8259A_IRQ_BASE+09
+ * I8259A_IRQ_BASE+10
+ * I8259A_IRQ_BASE+11
+ * I8259A_IRQ_BASE+12 PS2/Mouse (not supported at this time)
+ * I8259A_IRQ_BASE+13
+ * I8259A_IRQ_BASE+14 IDE
+ * I8259A_IRQ_BASE+15
+ *
+ * MIPS_CPU_IRQ_BASE+00 Software 0
+ * MIPS_CPU_IRQ_BASE+01 Software 1
+ * MIPS_CPU_IRQ_BASE+02 Cascade TX4927-CP0
+ * MIPS_CPU_IRQ_BASE+03 Multiplexed -- do not use
+ * MIPS_CPU_IRQ_BASE+04 Multiplexed -- do not use
+ * MIPS_CPU_IRQ_BASE+05 Multiplexed -- do not use
+ * MIPS_CPU_IRQ_BASE+06 Multiplexed -- do not use
+ * MIPS_CPU_IRQ_BASE+07 CPU TIMER
+ *
+ * TXX9_IRQ_BASE+00
+ * TXX9_IRQ_BASE+01
+ * TXX9_IRQ_BASE+02
+ * TXX9_IRQ_BASE+03 Cascade RBTX4927-IOC
+ * TXX9_IRQ_BASE+04
+ * TXX9_IRQ_BASE+05 RBTX4927 RTL-8019AS ethernet
+ * TXX9_IRQ_BASE+06
+ * TXX9_IRQ_BASE+07
+ * TXX9_IRQ_BASE+08 TX4927 SerialIO Channel 0
+ * TXX9_IRQ_BASE+09 TX4927 SerialIO Channel 1
+ * TXX9_IRQ_BASE+10
+ * TXX9_IRQ_BASE+11
+ * TXX9_IRQ_BASE+12
+ * TXX9_IRQ_BASE+13
+ * TXX9_IRQ_BASE+14
+ * TXX9_IRQ_BASE+15
+ * TXX9_IRQ_BASE+16 TX4927 PCI PCI-C
+ * TXX9_IRQ_BASE+17
+ * TXX9_IRQ_BASE+18
+ * TXX9_IRQ_BASE+19
+ * TXX9_IRQ_BASE+20
+ * TXX9_IRQ_BASE+21
+ * TXX9_IRQ_BASE+22 TX4927 PCI PCI-ERR
+ * TXX9_IRQ_BASE+23 TX4927 PCI PCI-PMA (not used)
+ * TXX9_IRQ_BASE+24
+ * TXX9_IRQ_BASE+25
+ * TXX9_IRQ_BASE+26
+ * TXX9_IRQ_BASE+27
+ * TXX9_IRQ_BASE+28
+ * TXX9_IRQ_BASE+29
+ * TXX9_IRQ_BASE+30
+ * TXX9_IRQ_BASE+31
+ *
+ * RBTX4927_IRQ_IOC+00 FPCIB0 PCI-D (SouthBridge)
+ * RBTX4927_IRQ_IOC+01 FPCIB0 PCI-C (SouthBridge)
+ * RBTX4927_IRQ_IOC+02 FPCIB0 PCI-B (SouthBridge/IDE/pin=1,INTR)
+ * RBTX4927_IRQ_IOC+03 FPCIB0 PCI-A (SouthBridge/USB/pin=4)
+ * RBTX4927_IRQ_IOC+04
+ * RBTX4927_IRQ_IOC+05
+ * RBTX4927_IRQ_IOC+06
+ * RBTX4927_IRQ_IOC+07
+ *
+ * NOTES:
+ * SouthBridge/INTR is mapped to SouthBridge/A=PCI-B/#58
+ * SouthBridge/ISA/pin=0 no pci irq used by this device
+ * SouthBridge/IDE/pin=1 no pci irq used by this device, using INTR
+ * via ISA IRQ14
+ * SouthBridge/USB/pin=4 using pci irq SouthBridge/D=PCI-A=#59
+ * SouthBridge/PMC/pin=0 no pci irq used by this device
+ * SuperIO/PS2/Keyboard, using INTR via ISA IRQ1
+ * SuperIO/PS2/Mouse, using INTR via ISA IRQ12 (mouse not currently supported)
+ * JP7 is not bus master -- do NOT use -- only 4 pci bus master's
+ * allowed -- SouthBridge, JP4, JP5, JP6
+ */
 
 #include <linux/init.h>
 #include <linux/types.h>
@@ -134,7 +135,7 @@ static int toshiba_rbtx4927_irq_nested(int sw_irq)
 	level3 = readb(rbtx4927_imstat_addr) & 0x1f;
 	if (level3)
 		sw_irq = RBTX4927_IRQ_IOC + fls(level3) - 1;
-	return (sw_irq);
+	return sw_irq;
 }
 
 static void __init toshiba_rbtx4927_irq_ioc_init(void)
diff --git a/arch/mips/txx9/rbtx4927/prom.c b/arch/mips/txx9/rbtx4927/prom.c
index 5c0de54ebdd2..1dc0a5b1956b 100644
--- a/arch/mips/txx9/rbtx4927/prom.c
+++ b/arch/mips/txx9/rbtx4927/prom.c
@@ -38,4 +38,5 @@ void __init rbtx4927_prom_init(void)
 {
 	prom_init_cmdline();
 	add_memory_region(0, tx4927_get_mem_size(), BOOT_MEM_RAM);
+	txx9_sio_putchar_init(TX4927_SIO_REG(0) & 0xfffffffffULL);
 }
diff --git a/arch/mips/txx9/rbtx4927/setup.c b/arch/mips/txx9/rbtx4927/setup.c
index 3da20ea3e55c..0d39bafea794 100644
--- a/arch/mips/txx9/rbtx4927/setup.c
+++ b/arch/mips/txx9/rbtx4927/setup.c
@@ -46,12 +46,9 @@
 #include <linux/kernel.h>
 #include <linux/types.h>
 #include <linux/ioport.h>
-#include <linux/interrupt.h>
-#include <linux/pm.h>
 #include <linux/platform_device.h>
 #include <linux/delay.h>
 #include <asm/io.h>
-#include <asm/processor.h>
 #include <asm/reboot.h>
 #include <asm/txx9/generic.h>
 #include <asm/txx9/pci.h>
@@ -103,6 +100,7 @@ static void __init tx4927_pci_setup(void)
 		tx4927_report_pciclk();
 		tx4927_pcic_setup(tx4927_pcicptr, c, extarb);
 	}
+	tx4927_setup_pcierr_irq();
 }
 
 static void __init tx4937_pci_setup(void)
@@ -149,6 +147,7 @@ static void __init tx4937_pci_setup(void)
 		tx4938_report_pciclk();
 		tx4927_pcic_setup(tx4938_pcicptr, c, extarb);
 	}
+	tx4938_setup_pcierr_irq();
 }
 
 static void __init rbtx4927_arch_init(void)
@@ -165,17 +164,8 @@ static void __init rbtx4937_arch_init(void)
 #define rbtx4937_arch_init NULL
 #endif /* CONFIG_PCI */
 
-static void __noreturn wait_forever(void)
-{
-	while (1)
-		if (cpu_wait)
-			(*cpu_wait)();
-}
-
 static void toshiba_rbtx4927_restart(char *command)
 {
-	printk(KERN_NOTICE "System Rebooting...\n");
-
 	/* enable the s/w reset register */
 	writeb(1, rbtx4927_softresetlock_addr);
 
@@ -186,24 +176,8 @@ static void toshiba_rbtx4927_restart(char *command)
 	/* do a s/w reset */
 	writeb(1, rbtx4927_softreset_addr);
 
-	/* do something passive while waiting for reset */
-	local_irq_disable();
-	wait_forever();
-	/* no return */
-}
-
-static void toshiba_rbtx4927_halt(void)
-{
-	printk(KERN_NOTICE "System Halted\n");
-	local_irq_disable();
-	wait_forever();
-	/* no return */
-}
-
-static void toshiba_rbtx4927_power_off(void)
-{
-	toshiba_rbtx4927_halt();
-	/* no return */
+	/* fallback */
+	(*_machine_halt)();
 }
 
 static void __init rbtx4927_clock_init(void);
@@ -214,9 +188,6 @@ static void __init rbtx4927_mem_setup(void)
 	u32 cp0_config;
 	char *argptr;
 
-	/* f/w leaves this on at startup */
-	clear_c0_status(ST0_ERL);
-
 	/* enable caches -- HCP5 does this, pmon does not */
 	cp0_config = read_c0_config();
 	cp0_config = cp0_config & ~(TX49_CONF_IC | TX49_CONF_DC);
@@ -231,37 +202,21 @@ static void __init rbtx4927_mem_setup(void)
 	}
 
 	_machine_restart = toshiba_rbtx4927_restart;
-	_machine_halt = toshiba_rbtx4927_halt;
-	pm_power_off = toshiba_rbtx4927_power_off;
 
 #ifdef CONFIG_PCI
 	txx9_alloc_pci_controller(&txx9_primary_pcic,
 				  RBTX4927_PCIMEM, RBTX4927_PCIMEM_SIZE,
 				  RBTX4927_PCIIO, RBTX4927_PCIIO_SIZE);
+	txx9_board_pcibios_setup = tx4927_pcibios_setup;
 #else
 	set_io_port_base(KSEG1 + RBTX4927_ISA_IO_OFFSET);
 #endif
 
-	tx4927_setup_serial();
+	tx4927_sio_init(0, 0);
 #ifdef CONFIG_SERIAL_TXX9_CONSOLE
-        argptr = prom_getcmdline();
-        if (strstr(argptr, "console=") == NULL) {
-                strcat(argptr, " console=ttyS0,38400");
-        }
-#endif
-
-#ifdef CONFIG_ROOT_NFS
-        argptr = prom_getcmdline();
-        if (strstr(argptr, "root=") == NULL) {
-                strcat(argptr, " root=/dev/nfs rw");
-        }
-#endif
-
-#ifdef CONFIG_IP_PNP
-        argptr = prom_getcmdline();
-        if (strstr(argptr, "ip=") == NULL) {
-                strcat(argptr, " ip=any");
-        }
+	argptr = prom_getcmdline();
+	if (!strstr(argptr, "console="))
+		strcat(argptr, " console=ttyS0,38400");
 #endif
 }
 
@@ -324,19 +279,17 @@ static void __init rbtx4927_time_init(void)
 	tx4927_time_init(0);
 }
 
-static int __init toshiba_rbtx4927_rtc_init(void)
+static void __init toshiba_rbtx4927_rtc_init(void)
 {
 	struct resource res = {
 		.start	= RBTX4927_BRAMRTC_BASE - IO_BASE,
 		.end	= RBTX4927_BRAMRTC_BASE - IO_BASE + 0x800 - 1,
 		.flags	= IORESOURCE_MEM,
 	};
-	struct platform_device *dev =
-		platform_device_register_simple("rtc-ds1742", -1, &res, 1);
-	return IS_ERR(dev) ? PTR_ERR(dev) : 0;
+	platform_device_register_simple("rtc-ds1742", -1, &res, 1);
 }
 
-static int __init rbtx4927_ne_init(void)
+static void __init rbtx4927_ne_init(void)
 {
 	struct resource res[] = {
 		{
@@ -348,36 +301,14 @@ static int __init rbtx4927_ne_init(void)
 			.flags	= IORESOURCE_IRQ,
 		}
 	};
-	struct platform_device *dev =
-		platform_device_register_simple("ne", -1,
-						res, ARRAY_SIZE(res));
-	return IS_ERR(dev) ? PTR_ERR(dev) : 0;
-}
-
-/* Watchdog support */
-
-static int __init txx9_wdt_init(unsigned long base)
-{
-	struct resource res = {
-		.start	= base,
-		.end	= base + 0x100 - 1,
-		.flags	= IORESOURCE_MEM,
-	};
-	struct platform_device *dev =
-		platform_device_register_simple("txx9wdt", -1, &res, 1);
-	return IS_ERR(dev) ? PTR_ERR(dev) : 0;
-}
-
-static int __init rbtx4927_wdt_init(void)
-{
-	return txx9_wdt_init(TX4927_TMR_REG(2) & 0xfffffffffULL);
+	platform_device_register_simple("ne", -1, res, ARRAY_SIZE(res));
 }
 
 static void __init rbtx4927_device_init(void)
 {
 	toshiba_rbtx4927_rtc_init();
 	rbtx4927_ne_init();
-	rbtx4927_wdt_init();
+	tx4927_wdt_init();
 }
 
 struct txx9_board_vec rbtx4927_vec __initdata = {
diff --git a/arch/mips/txx9/rbtx4938/irq.c b/arch/mips/txx9/rbtx4938/irq.c
index 3971a061657a..ca2f8306ce93 100644
--- a/arch/mips/txx9/rbtx4938/irq.c
+++ b/arch/mips/txx9/rbtx4938/irq.c
@@ -11,59 +11,57 @@
  */
 
 /*
-IRQ  Device
-
-16   TX4938-CP0/00 Software 0
-17   TX4938-CP0/01 Software 1
-18   TX4938-CP0/02 Cascade TX4938-CP0
-19   TX4938-CP0/03 Multiplexed -- do not use
-20   TX4938-CP0/04 Multiplexed -- do not use
-21   TX4938-CP0/05 Multiplexed -- do not use
-22   TX4938-CP0/06 Multiplexed -- do not use
-23   TX4938-CP0/07 CPU TIMER
-
-24   TX4938-PIC/00
-25   TX4938-PIC/01
-26   TX4938-PIC/02 Cascade RBTX4938-IOC
-27   TX4938-PIC/03 RBTX4938 RTL-8019AS Ethernet
-28   TX4938-PIC/04
-29   TX4938-PIC/05 TX4938 ETH1
-30   TX4938-PIC/06 TX4938 ETH0
-31   TX4938-PIC/07
-32   TX4938-PIC/08 TX4938 SIO 0
-33   TX4938-PIC/09 TX4938 SIO 1
-34   TX4938-PIC/10 TX4938 DMA0
-35   TX4938-PIC/11 TX4938 DMA1
-36   TX4938-PIC/12 TX4938 DMA2
-37   TX4938-PIC/13 TX4938 DMA3
-38   TX4938-PIC/14
-39   TX4938-PIC/15
-40   TX4938-PIC/16 TX4938 PCIC
-41   TX4938-PIC/17 TX4938 TMR0
-42   TX4938-PIC/18 TX4938 TMR1
-43   TX4938-PIC/19 TX4938 TMR2
-44   TX4938-PIC/20
-45   TX4938-PIC/21
-46   TX4938-PIC/22 TX4938 PCIERR
-47   TX4938-PIC/23
-48   TX4938-PIC/24
-49   TX4938-PIC/25
-50   TX4938-PIC/26
-51   TX4938-PIC/27
-52   TX4938-PIC/28
-53   TX4938-PIC/29
-54   TX4938-PIC/30
-55   TX4938-PIC/31 TX4938 SPI
-
-56 RBTX4938-IOC/00 PCI-D
-57 RBTX4938-IOC/01 PCI-C
-58 RBTX4938-IOC/02 PCI-B
-59 RBTX4938-IOC/03 PCI-A
-60 RBTX4938-IOC/04 RTC
-61 RBTX4938-IOC/05 ATA
-62 RBTX4938-IOC/06 MODEM
-63 RBTX4938-IOC/07 SWINT
-*/
+ * MIPS_CPU_IRQ_BASE+00 Software 0
+ * MIPS_CPU_IRQ_BASE+01 Software 1
+ * MIPS_CPU_IRQ_BASE+02 Cascade TX4938-CP0
+ * MIPS_CPU_IRQ_BASE+03 Multiplexed -- do not use
+ * MIPS_CPU_IRQ_BASE+04 Multiplexed -- do not use
+ * MIPS_CPU_IRQ_BASE+05 Multiplexed -- do not use
+ * MIPS_CPU_IRQ_BASE+06 Multiplexed -- do not use
+ * MIPS_CPU_IRQ_BASE+07 CPU TIMER
+ *
+ * TXX9_IRQ_BASE+00
+ * TXX9_IRQ_BASE+01
+ * TXX9_IRQ_BASE+02 Cascade RBTX4938-IOC
+ * TXX9_IRQ_BASE+03 RBTX4938 RTL-8019AS Ethernet
+ * TXX9_IRQ_BASE+04
+ * TXX9_IRQ_BASE+05 TX4938 ETH1
+ * TXX9_IRQ_BASE+06 TX4938 ETH0
+ * TXX9_IRQ_BASE+07
+ * TXX9_IRQ_BASE+08 TX4938 SIO 0
+ * TXX9_IRQ_BASE+09 TX4938 SIO 1
+ * TXX9_IRQ_BASE+10 TX4938 DMA0
+ * TXX9_IRQ_BASE+11 TX4938 DMA1
+ * TXX9_IRQ_BASE+12 TX4938 DMA2
+ * TXX9_IRQ_BASE+13 TX4938 DMA3
+ * TXX9_IRQ_BASE+14
+ * TXX9_IRQ_BASE+15
+ * TXX9_IRQ_BASE+16 TX4938 PCIC
+ * TXX9_IRQ_BASE+17 TX4938 TMR0
+ * TXX9_IRQ_BASE+18 TX4938 TMR1
+ * TXX9_IRQ_BASE+19 TX4938 TMR2
+ * TXX9_IRQ_BASE+20
+ * TXX9_IRQ_BASE+21
+ * TXX9_IRQ_BASE+22 TX4938 PCIERR
+ * TXX9_IRQ_BASE+23
+ * TXX9_IRQ_BASE+24
+ * TXX9_IRQ_BASE+25
+ * TXX9_IRQ_BASE+26
+ * TXX9_IRQ_BASE+27
+ * TXX9_IRQ_BASE+28
+ * TXX9_IRQ_BASE+29
+ * TXX9_IRQ_BASE+30
+ * TXX9_IRQ_BASE+31 TX4938 SPI
+ *
+ * RBTX4938_IRQ_IOC+00 PCI-D
+ * RBTX4938_IRQ_IOC+01 PCI-C
+ * RBTX4938_IRQ_IOC+02 PCI-B
+ * RBTX4938_IRQ_IOC+03 PCI-A
+ * RBTX4938_IRQ_IOC+04 RTC
+ * RBTX4938_IRQ_IOC+05 ATA
+ * RBTX4938_IRQ_IOC+06 MODEM
+ * RBTX4938_IRQ_IOC+07 SWINT
+ */
 #include <linux/init.h>
 #include <linux/interrupt.h>
 #include <asm/mipsregs.h>
@@ -93,9 +91,6 @@ static int toshiba_rbtx4938_irq_nested(int sw_irq)
 	return sw_irq;
 }
 
-/**********************************************************************************/
-/* Functions for ioc                                                              */
-/**********************************************************************************/
 static void __init
 toshiba_rbtx4938_irq_ioc_init(void)
 {
diff --git a/arch/mips/txx9/rbtx4938/prom.c b/arch/mips/txx9/rbtx4938/prom.c
index ee189519ce5a..d73123cd2ab9 100644
--- a/arch/mips/txx9/rbtx4938/prom.c
+++ b/arch/mips/txx9/rbtx4938/prom.c
@@ -22,4 +22,5 @@ void __init rbtx4938_prom_init(void)
 	prom_init_cmdline();
 #endif
 	add_memory_region(0, tx4938_get_mem_size(), BOOT_MEM_RAM);
+	txx9_sio_putchar_init(TX4938_SIO_REG(0) & 0xfffffffffULL);
 }
diff --git a/arch/mips/txx9/rbtx4938/setup.c b/arch/mips/txx9/rbtx4938/setup.c
index 6c2b99bb8af6..9ab48dec0fe8 100644
--- a/arch/mips/txx9/rbtx4938/setup.c
+++ b/arch/mips/txx9/rbtx4938/setup.c
@@ -13,9 +13,6 @@
 #include <linux/types.h>
 #include <linux/ioport.h>
 #include <linux/delay.h>
-#include <linux/interrupt.h>
-#include <linux/console.h>
-#include <linux/pm.h>
 #include <linux/platform_device.h>
 #include <linux/gpio.h>
 
@@ -28,33 +25,14 @@
 #include <asm/txx9/spi.h>
 #include <asm/txx9pio.h>
 
-static void rbtx4938_machine_halt(void)
-{
-        printk(KERN_NOTICE "System Halted\n");
-	local_irq_disable();
-
-	while (1)
-		__asm__(".set\tmips3\n\t"
-			"wait\n\t"
-			".set\tmips0");
-}
-
-static void rbtx4938_machine_power_off(void)
-{
-        rbtx4938_machine_halt();
-        /* no return */
-}
-
 static void rbtx4938_machine_restart(char *command)
 {
 	local_irq_disable();
-
-	printk("Rebooting...");
 	writeb(1, rbtx4938_softresetlock_addr);
 	writeb(1, rbtx4938_sfvol_addr);
 	writeb(1, rbtx4938_softreset_addr);
-	while(1)
-		;
+	/* fallback */
+	(*_machine_halt)();
 }
 
 static void __init rbtx4938_pci_setup(void)
@@ -121,6 +99,7 @@ static void __init rbtx4938_pci_setup(void)
 		register_pci_controller(c);
 		tx4927_pcic_setup(tx4938_pcic1ptr, c, 0);
 	}
+	tx4938_setup_pcierr_irq();
 #endif /* CONFIG_PCI */
 }
 
@@ -151,19 +130,7 @@ static int __init rbtx4938_ethaddr_init(void)
 		if (sum)
 			printk(KERN_WARNING "seeprom: bad checksum.\n");
 	}
-	for (i = 0; i < 2; i++) {
-		unsigned int id =
-			TXX9_IRQ_BASE + (i ? TX4938_IR_ETH1 : TX4938_IR_ETH0);
-		struct platform_device *pdev;
-		if (!(__raw_readq(&tx4938_ccfgptr->pcfg) &
-		      (i ? TX4938_PCFG_ETH1_SEL : TX4938_PCFG_ETH0_SEL)))
-			continue;
-		pdev = platform_device_alloc("tc35815-mac", id);
-		if (!pdev ||
-		    platform_device_add_data(pdev, &dat[4 + 6 * i], 6) ||
-		    platform_device_add(pdev))
-			platform_device_put(pdev);
-	}
+	tx4938_ethaddr_init(&dat[4], &dat[4 + 6]);
 #endif /* CONFIG_PCI */
 	return 0;
 }
@@ -193,51 +160,36 @@ static void __init rbtx4938_mem_setup(void)
 
 #ifdef CONFIG_PCI
 	txx9_alloc_pci_controller(&txx9_primary_pcic, 0, 0, 0, 0);
+	txx9_board_pcibios_setup = tx4927_pcibios_setup;
 #else
 	set_io_port_base(RBTX4938_ETHER_BASE);
 #endif
 
-	tx4938_setup_serial();
+	tx4938_sio_init(7372800, 0);
 #ifdef CONFIG_SERIAL_TXX9_CONSOLE
-        argptr = prom_getcmdline();
-        if (strstr(argptr, "console=") == NULL) {
-                strcat(argptr, " console=ttyS0,38400");
-        }
+	argptr = prom_getcmdline();
+	if (!strstr(argptr, "console="))
+		strcat(argptr, " console=ttyS0,38400");
 #endif
 
 #ifdef CONFIG_TOSHIBA_RBTX4938_MPLEX_PIO58_61
-	printk("PIOSEL: disabling both ata and nand selection\n");
-	local_irq_disable();
+	printk(KERN_INFO "PIOSEL: disabling both ata and nand selection\n");
 	txx9_clear64(&tx4938_ccfgptr->pcfg,
 		     TX4938_PCFG_NDF_SEL | TX4938_PCFG_ATA_SEL);
 #endif
 
 #ifdef CONFIG_TOSHIBA_RBTX4938_MPLEX_NAND
-	printk("PIOSEL: enabling nand selection\n");
+	printk(KERN_INFO "PIOSEL: enabling nand selection\n");
 	txx9_set64(&tx4938_ccfgptr->pcfg, TX4938_PCFG_NDF_SEL);
 	txx9_clear64(&tx4938_ccfgptr->pcfg, TX4938_PCFG_ATA_SEL);
 #endif
 
 #ifdef CONFIG_TOSHIBA_RBTX4938_MPLEX_ATA
-	printk("PIOSEL: enabling ata selection\n");
+	printk(KERN_INFO "PIOSEL: enabling ata selection\n");
 	txx9_set64(&tx4938_ccfgptr->pcfg, TX4938_PCFG_ATA_SEL);
 	txx9_clear64(&tx4938_ccfgptr->pcfg, TX4938_PCFG_NDF_SEL);
 #endif
 
-#ifdef CONFIG_IP_PNP
-	argptr = prom_getcmdline();
-	if (strstr(argptr, "ip=") == NULL) {
-		strcat(argptr, " ip=any");
-	}
-#endif
-
-
-#ifdef CONFIG_FB
-	{
-		conswitchp = &dummy_con;
-	}
-#endif
-
 	rbtx4938_spi_setup();
 	pcfg = ____raw_readq(&tx4938_ccfgptr->pcfg);	/* updated */
 	/* fixup piosel */
@@ -258,11 +210,9 @@ static void __init rbtx4938_mem_setup(void)
 	rbtx4938_fpga_resource.end = CPHYSADDR(RBTX4938_FPGA_REG_ADDR) + 0xffff;
 	rbtx4938_fpga_resource.flags = IORESOURCE_MEM | IORESOURCE_BUSY;
 	if (request_resource(&txx9_ce_res[2], &rbtx4938_fpga_resource))
-		printk("request resource for fpga failed\n");
+		printk(KERN_ERR "request resource for fpga failed\n");
 
 	_machine_restart = rbtx4938_machine_restart;
-	_machine_halt = rbtx4938_machine_halt;
-	pm_power_off = rbtx4938_machine_power_off;
 
 	writeb(0xff, rbtx4938_led_addr);
 	printk(KERN_INFO "RBTX4938 --- FPGA(Rev %02x) DIPSW:%02x,%02x\n",
@@ -270,7 +220,7 @@ static void __init rbtx4938_mem_setup(void)
 	       readb(rbtx4938_dipsw_addr), readb(rbtx4938_bdipsw_addr));
 }
 
-static int __init rbtx4938_ne_init(void)
+static void __init rbtx4938_ne_init(void)
 {
 	struct resource res[] = {
 		{
@@ -282,10 +232,7 @@ static int __init rbtx4938_ne_init(void)
 			.flags	= IORESOURCE_IRQ,
 		}
 	};
-	struct platform_device *dev =
-		platform_device_register_simple("ne", -1,
-						res, ARRAY_SIZE(res));
-	return IS_ERR(dev) ? PTR_ERR(dev) : 0;
+	platform_device_register_simple("ne", -1, res, ARRAY_SIZE(res));
 }
 
 static DEFINE_SPINLOCK(rbtx4938_spi_gpio_lock);
@@ -321,24 +268,6 @@ static struct gpio_chip rbtx4938_spi_gpio_chip = {
 	.ngpio = 3,
 };
 
-/* SPI support */
-
-static void __init txx9_spi_init(unsigned long base, int irq)
-{
-	struct resource res[] = {
-		{
-			.start	= base,
-			.end	= base + 0x20 - 1,
-			.flags	= IORESOURCE_MEM,
-		}, {
-			.start	= irq,
-			.flags	= IORESOURCE_IRQ,
-		},
-	};
-	platform_device_register_simple("spi_txx9", 0,
-					res, ARRAY_SIZE(res));
-}
-
 static int __init rbtx4938_spi_init(void)
 {
 	struct spi_board_info srtc_info = {
@@ -361,7 +290,7 @@ static int __init rbtx4938_spi_init(void)
 	gpio_direction_output(16 + SEEPROM2_CS, 1);
 	gpio_request(16 + SEEPROM3_CS, "seeprom3");
 	gpio_direction_output(16 + SEEPROM3_CS, 1);
-	txx9_spi_init(TX4938_SPI_REG & 0xfffffffffULL, RBTX4938_IRQ_IRC_SPI);
+	tx4938_spi_init(0);
 	return 0;
 }
 
@@ -372,30 +301,11 @@ static void __init rbtx4938_arch_init(void)
 	rbtx4938_spi_init();
 }
 
-/* Watchdog support */
-
-static int __init txx9_wdt_init(unsigned long base)
-{
-	struct resource res = {
-		.start	= base,
-		.end	= base + 0x100 - 1,
-		.flags	= IORESOURCE_MEM,
-	};
-	struct platform_device *dev =
-		platform_device_register_simple("txx9wdt", -1, &res, 1);
-	return IS_ERR(dev) ? PTR_ERR(dev) : 0;
-}
-
-static int __init rbtx4938_wdt_init(void)
-{
-	return txx9_wdt_init(TX4938_TMR_REG(2) & 0xfffffffffULL);
-}
-
 static void __init rbtx4938_device_init(void)
 {
 	rbtx4938_ethaddr_init();
 	rbtx4938_ne_init();
-	rbtx4938_wdt_init();
+	tx4938_wdt_init();
 }
 
 struct txx9_board_vec rbtx4938_vec __initdata = {
diff --git a/arch/mn10300/boot/compressed/misc.c b/arch/mn10300/boot/compressed/misc.c
index ded207efc97a..f673383518e4 100644
--- a/arch/mn10300/boot/compressed/misc.c
+++ b/arch/mn10300/boot/compressed/misc.c
@@ -153,26 +153,9 @@ static uch *output_data;
 static unsigned long output_ptr;
 
 
-static void *malloc(int size);
-
-static inline void free(void *where)
-{	/* Don't care */
-}
-
 static unsigned long free_mem_ptr = (unsigned long) &end;
 static unsigned long free_mem_end_ptr = (unsigned long) &end + 0x90000;
 
-static inline void gzip_mark(void **ptr)
-{
-	kputs(".");
-	*ptr = (void *) free_mem_ptr;
-}
-
-static inline void gzip_release(void **ptr)
-{
-	free_mem_ptr = (unsigned long) *ptr;
-}
-
 #define INPLACE_MOVE_ROUTINE	0x1000
 #define LOW_BUFFER_START	0x2000
 #define LOW_BUFFER_END		0x90000
@@ -186,26 +169,6 @@ static int lines, cols;
 
 #include "../../../../lib/inflate.c"
 
-static void *malloc(int size)
-{
-	void *p;
-
-	if (size < 0)
-		error("Malloc error\n");
-	if (!free_mem_ptr)
-		error("Memory error\n");
-
-	free_mem_ptr = (free_mem_ptr + 3) & ~3;	/* Align */
-
-	p = (void *) free_mem_ptr;
-	free_mem_ptr += size;
-
-	if (free_mem_ptr >= free_mem_end_ptr)
-		error("\nOut of memory\n");
-
-	return p;
-}
-
 static inline void scroll(void)
 {
 	int i;
diff --git a/arch/mn10300/kernel/entry.S b/arch/mn10300/kernel/entry.S
index 11de3606eee6..b7cbb1487af4 100644
--- a/arch/mn10300/kernel/entry.S
+++ b/arch/mn10300/kernel/entry.S
@@ -716,6 +716,12 @@ ENTRY(sys_call_table)
 	.long sys_fallocate		/* 325 */
 	.long sys_timerfd_settime
 	.long sys_timerfd_gettime
+	.long sys_signalfd4
+	.long sys_eventfd2
+	.long sys_epoll_create1		/* 330 */
+	.long sys_dup3
+	.long sys_pipe2
+	.long sys_inotify_init1
 
 
 nr_syscalls=(.-sys_call_table)/4
diff --git a/arch/mn10300/kernel/gdb-stub.c b/arch/mn10300/kernel/gdb-stub.c
index 21891c71d549..54be6afb5555 100644
--- a/arch/mn10300/kernel/gdb-stub.c
+++ b/arch/mn10300/kernel/gdb-stub.c
@@ -163,8 +163,6 @@ static char	input_buffer[BUFMAX];
 static char	output_buffer[BUFMAX];
 static char	trans_buffer[BUFMAX];
 
-static const char hexchars[] = "0123456789abcdef";
-
 struct gdbstub_bkpt {
 	u8	*addr;		/* address of breakpoint */
 	u8	len;		/* size of breakpoint */
@@ -363,8 +361,8 @@ static int putpacket(char *buffer)
 		}
 
 		gdbstub_io_tx_char('#');
-		gdbstub_io_tx_char(hexchars[checksum >> 4]);
-		gdbstub_io_tx_char(hexchars[checksum & 0xf]);
+		gdbstub_io_tx_char(hex_asc_hi(checksum));
+		gdbstub_io_tx_char(hex_asc_lo(checksum));
 
 	} while (gdbstub_io_rx_char(&ch, 0),
 		 ch == '-' && (gdbstub_io("### GDB Rx NAK\n"), 0),
@@ -822,8 +820,7 @@ unsigned char *mem2hex(const void *_mem, char *buf, int count, int may_fault)
 	if ((u32) mem & 1 && count >= 1) {
 		if (gdbstub_read_byte(mem, ch) != 0)
 			return 0;
-		*buf++ = hexchars[ch[0] >> 4];
-		*buf++ = hexchars[ch[0] & 0xf];
+		buf = pack_hex_byte(buf, ch[0]);
 		mem++;
 		count--;
 	}
@@ -831,10 +828,8 @@ unsigned char *mem2hex(const void *_mem, char *buf, int count, int may_fault)
 	if ((u32) mem & 3 && count >= 2) {
 		if (gdbstub_read_word(mem, ch) != 0)
 			return 0;
-		*buf++ = hexchars[ch[0] >> 4];
-		*buf++ = hexchars[ch[0] & 0xf];
-		*buf++ = hexchars[ch[1] >> 4];
-		*buf++ = hexchars[ch[1] & 0xf];
+		buf = pack_hex_byte(buf, ch[0]);
+		buf = pack_hex_byte(buf, ch[1]);
 		mem += 2;
 		count -= 2;
 	}
@@ -842,14 +837,10 @@ unsigned char *mem2hex(const void *_mem, char *buf, int count, int may_fault)
 	while (count >= 4) {
 		if (gdbstub_read_dword(mem, ch) != 0)
 			return 0;
-		*buf++ = hexchars[ch[0] >> 4];
-		*buf++ = hexchars[ch[0] & 0xf];
-		*buf++ = hexchars[ch[1] >> 4];
-		*buf++ = hexchars[ch[1] & 0xf];
-		*buf++ = hexchars[ch[2] >> 4];
-		*buf++ = hexchars[ch[2] & 0xf];
-		*buf++ = hexchars[ch[3] >> 4];
-		*buf++ = hexchars[ch[3] & 0xf];
+		buf = pack_hex_byte(buf, ch[0]);
+		buf = pack_hex_byte(buf, ch[1]);
+		buf = pack_hex_byte(buf, ch[2]);
+		buf = pack_hex_byte(buf, ch[3]);
 		mem += 4;
 		count -= 4;
 	}
@@ -857,10 +848,8 @@ unsigned char *mem2hex(const void *_mem, char *buf, int count, int may_fault)
 	if (count >= 2) {
 		if (gdbstub_read_word(mem, ch) != 0)
 			return 0;
-		*buf++ = hexchars[ch[0] >> 4];
-		*buf++ = hexchars[ch[0] & 0xf];
-		*buf++ = hexchars[ch[1] >> 4];
-		*buf++ = hexchars[ch[1] & 0xf];
+		buf = pack_hex_byte(buf, ch[0]);
+		buf = pack_hex_byte(buf, ch[1]);
 		mem += 2;
 		count -= 2;
 	}
@@ -868,8 +857,7 @@ unsigned char *mem2hex(const void *_mem, char *buf, int count, int may_fault)
 	if (count >= 1) {
 		if (gdbstub_read_byte(mem, ch) != 0)
 			return 0;
-		*buf++ = hexchars[ch[0] >> 4];
-		*buf++ = hexchars[ch[0] & 0xf];
+		buf = pack_hex_byte(buf, ch[0]);
 	}
 
 	*buf = 0;
@@ -1304,14 +1292,14 @@ static int gdbstub(struct pt_regs *regs, enum exception_code excep)
 		*ptr++ = 'O';
 		ptr = mem2hex(title, ptr, sizeof(title) - 1, 0);
 
-		hx = hexchars[(excep & 0xf000) >> 12];
-		*ptr++ = hexchars[hx >> 4];	*ptr++ = hexchars[hx & 0xf];
-		hx = hexchars[(excep & 0x0f00) >> 8];
-		*ptr++ = hexchars[hx >> 4];	*ptr++ = hexchars[hx & 0xf];
-		hx = hexchars[(excep & 0x00f0) >> 4];
-		*ptr++ = hexchars[hx >> 4];	*ptr++ = hexchars[hx & 0xf];
-		hx = hexchars[(excep & 0x000f)];
-		*ptr++ = hexchars[hx >> 4];	*ptr++ = hexchars[hx & 0xf];
+		hx = hex_asc_hi(excep >> 8);
+		ptr = pack_hex_byte(ptr, hx);
+		hx = hex_asc_lo(excep >> 8);
+		ptr = pack_hex_byte(ptr, hx);
+		hx = hex_asc_hi(excep);
+		ptr = pack_hex_byte(ptr, hx);
+		hx = hex_asc_lo(excep);
+		ptr = pack_hex_byte(ptr, hx);
 
 		ptr = mem2hex(crlf, ptr, sizeof(crlf) - 1, 0);
 		*ptr = 0;
@@ -1322,22 +1310,22 @@ static int gdbstub(struct pt_regs *regs, enum exception_code excep)
 		*ptr++ = 'O';
 		ptr = mem2hex(tbcberr, ptr, sizeof(tbcberr) - 1, 0);
 
-		hx = hexchars[(bcberr & 0xf0000000) >> 28];
-		*ptr++ = hexchars[hx >> 4];	*ptr++ = hexchars[hx & 0xf];
-		hx = hexchars[(bcberr & 0x0f000000) >> 24];
-		*ptr++ = hexchars[hx >> 4];	*ptr++ = hexchars[hx & 0xf];
-		hx = hexchars[(bcberr & 0x00f00000) >> 20];
-		*ptr++ = hexchars[hx >> 4];	*ptr++ = hexchars[hx & 0xf];
-		hx = hexchars[(bcberr & 0x000f0000) >> 16];
-		*ptr++ = hexchars[hx >> 4];	*ptr++ = hexchars[hx & 0xf];
-		hx = hexchars[(bcberr & 0x0000f000) >> 12];
-		*ptr++ = hexchars[hx >> 4];	*ptr++ = hexchars[hx & 0xf];
-		hx = hexchars[(bcberr & 0x00000f00) >> 8];
-		*ptr++ = hexchars[hx >> 4];	*ptr++ = hexchars[hx & 0xf];
-		hx = hexchars[(bcberr & 0x000000f0) >> 4];
-		*ptr++ = hexchars[hx >> 4];	*ptr++ = hexchars[hx & 0xf];
-		hx = hexchars[(bcberr & 0x0000000f)];
-		*ptr++ = hexchars[hx >> 4];	*ptr++ = hexchars[hx & 0xf];
+		hx = hex_asc_hi(bcberr >> 24);
+		ptr = pack_hex_byte(ptr, hx);
+		hx = hex_asc_lo(bcberr >> 24);
+		ptr = pack_hex_byte(ptr, hx);
+		hx = hex_asc_hi(bcberr >> 16);
+		ptr = pack_hex_byte(ptr, hx);
+		hx = hex_asc_lo(bcberr >> 16);
+		ptr = pack_hex_byte(ptr, hx);
+		hx = hex_asc_hi(bcberr >> 8);
+		ptr = pack_hex_byte(ptr, hx);
+		hx = hex_asc_lo(bcberr >> 8);
+		ptr = pack_hex_byte(ptr, hx);
+		hx = hex_asc_hi(bcberr);
+		ptr = pack_hex_byte(ptr, hx);
+		hx = hex_asc_lo(bcberr);
+		ptr = pack_hex_byte(ptr, hx);
 
 		ptr = mem2hex(crlf, ptr, sizeof(crlf) - 1, 0);
 		*ptr = 0;
@@ -1353,14 +1341,12 @@ static int gdbstub(struct pt_regs *regs, enum exception_code excep)
 	 * Send trap type (converted to signal)
 	 */
 	*ptr++ = 'T';
-	*ptr++ = hexchars[sigval >> 4];
-	*ptr++ = hexchars[sigval & 0xf];
+	ptr = pack_hex_byte(ptr, sigval);
 
 	/*
 	 * Send Error PC
 	 */
-	*ptr++ = hexchars[GDB_REGID_PC >> 4];
-	*ptr++ = hexchars[GDB_REGID_PC & 0xf];
+	ptr = pack_hex_byte(ptr, GDB_REGID_PC);
 	*ptr++ = ':';
 	ptr = mem2hex(&regs->pc, ptr, 4, 0);
 	*ptr++ = ';';
@@ -1368,8 +1354,7 @@ static int gdbstub(struct pt_regs *regs, enum exception_code excep)
 	/*
 	 * Send frame pointer
 	 */
-	*ptr++ = hexchars[GDB_REGID_FP >> 4];
-	*ptr++ = hexchars[GDB_REGID_FP & 0xf];
+	ptr = pack_hex_byte(ptr, GDB_REGID_FP);
 	*ptr++ = ':';
 	ptr = mem2hex(&regs->a3, ptr, 4, 0);
 	*ptr++ = ';';
@@ -1378,8 +1363,7 @@ static int gdbstub(struct pt_regs *regs, enum exception_code excep)
 	 * Send stack pointer
 	 */
 	ssp = (unsigned long) (regs + 1);
-	*ptr++ = hexchars[GDB_REGID_SP >> 4];
-	*ptr++ = hexchars[GDB_REGID_SP & 0xf];
+	ptr = pack_hex_byte(ptr, GDB_REGID_SP);
 	*ptr++ = ':';
 	ptr = mem2hex(&ssp, ptr, 4, 0);
 	*ptr++ = ';';
@@ -1399,8 +1383,8 @@ packet_waiting:
 			/* request repeat of last signal number */
 		case '?':
 			output_buffer[0] = 'S';
-			output_buffer[1] = hexchars[sigval >> 4];
-			output_buffer[2] = hexchars[sigval & 0xf];
+			output_buffer[1] = hex_asc_hi(sigval);
+			output_buffer[2] = hex_asc_lo(sigval);
 			output_buffer[3] = 0;
 			break;
 
@@ -1838,8 +1822,8 @@ void gdbstub_exit(int status)
 
 	gdbstub_busy = 1;
 	output_buffer[0] = 'W';
-	output_buffer[1] = hexchars[(status >> 4) & 0x0F];
-	output_buffer[2] = hexchars[status & 0x0F];
+	output_buffer[1] = hex_asc_hi(status);
+	output_buffer[2] = hex_asc_lo(status);
 	output_buffer[3] = 0;
 
 	gdbstub_io_tx_char('$');
@@ -1853,8 +1837,8 @@ void gdbstub_exit(int status)
 	}
 
 	gdbstub_io_tx_char('#');
-	gdbstub_io_tx_char(hexchars[checksum >> 4]);
-	gdbstub_io_tx_char(hexchars[checksum & 0xf]);
+	gdbstub_io_tx_char(hex_asc_hi(checksum));
+	gdbstub_io_tx_char(hex_asc_lo(checksum));
 
 	/* make sure the output is flushed, or else RedBoot might clobber it */
 	gdbstub_io_tx_flush();
diff --git a/arch/mn10300/kernel/mn10300-serial.c b/arch/mn10300/kernel/mn10300-serial.c
index 8b054e7a8ae8..aa07d0cd1905 100644
--- a/arch/mn10300/kernel/mn10300-serial.c
+++ b/arch/mn10300/kernel/mn10300-serial.c
@@ -17,7 +17,6 @@ static const char serial_revdate[] = "2007-11-06";
 #define SUPPORT_SYSRQ
 #endif
 
-#include <linux/version.h>
 #include <linux/module.h>
 #include <linux/serial.h>
 #include <linux/circ_buf.h>
diff --git a/arch/mn10300/kernel/module.c b/arch/mn10300/kernel/module.c
index 0e4d2f6fa6e8..8fa36893df7a 100644
--- a/arch/mn10300/kernel/module.c
+++ b/arch/mn10300/kernel/module.c
@@ -24,6 +24,7 @@
 #include <linux/fs.h>
 #include <linux/string.h>
 #include <linux/kernel.h>
+#include <linux/bug.h>
 
 #if 0
 #define DEBUGP printk
@@ -195,7 +196,7 @@ int module_finalize(const Elf_Ehdr *hdr,
 		    const Elf_Shdr *sechdrs,
 		    struct module *me)
 {
-	return 0;
+	return module_bug_finalize(hdr, sechdrs, me);
 }
 
 /*
@@ -203,4 +204,5 @@ int module_finalize(const Elf_Ehdr *hdr,
  */
 void module_arch_cleanup(struct module *mod)
 {
+	module_bug_cleanup(mod);
 }
diff --git a/arch/mn10300/mm/pgtable.c b/arch/mn10300/mm/pgtable.c
index a477038752ba..baffc581e031 100644
--- a/arch/mn10300/mm/pgtable.c
+++ b/arch/mn10300/mm/pgtable.c
@@ -27,33 +27,6 @@
 #include <asm/tlb.h>
 #include <asm/tlbflush.h>
 
-void show_mem(void)
-{
-	unsigned long i;
-	int free = 0, total = 0, reserved = 0, shared = 0;
-
-	int cached = 0;
-	printk(KERN_INFO "Mem-info:\n");
-	show_free_areas();
-	i = max_mapnr;
-	while (i-- > 0) {
-		total++;
-		if (PageReserved(mem_map + i))
-			reserved++;
-		else if (PageSwapCache(mem_map + i))
-			cached++;
-		else if (!page_count(mem_map + i))
-			free++;
-		else
-			shared += page_count(mem_map + i) - 1;
-	}
-	printk(KERN_INFO "%d pages of RAM\n", total);
-	printk(KERN_INFO "%d free pages\n", free);
-	printk(KERN_INFO "%d reserved pages\n", reserved);
-	printk(KERN_INFO "%d pages shared\n", shared);
-	printk(KERN_INFO "%d pages swap cached\n", cached);
-}
-
 /*
  * Associate a large virtual page frame with a given physical page frame
  * and protection flags for that frame. pfn is for the base of the page,
diff --git a/arch/parisc/hpux/fs.c b/arch/parisc/hpux/fs.c
index 1263f00dc35d..12c04c5e558b 100644
--- a/arch/parisc/hpux/fs.c
+++ b/arch/parisc/hpux/fs.c
@@ -84,22 +84,28 @@ static int filldir(void * __buf, const char * name, int namlen, loff_t offset,
 	if (reclen > buf->count)
 		return -EINVAL;
 	d_ino = ino;
-	if (sizeof(d_ino) < sizeof(ino) && d_ino != ino)
+	if (sizeof(d_ino) < sizeof(ino) && d_ino != ino) {
+		buf->error = -EOVERFLOW;
 		return -EOVERFLOW;
+	}
 	dirent = buf->previous;
 	if (dirent)
-		put_user(offset, &dirent->d_off);
+		if (put_user(offset, &dirent->d_off))
+			goto Efault;
 	dirent = buf->current_dir;
+	if (put_user(d_ino, &dirent->d_ino) ||
+	    put_user(reclen, &dirent->d_reclen) ||
+	    put_user(namlen, &dirent->d_namlen) ||
+	    copy_to_user(dirent->d_name, name, namlen) ||
+	    put_user(0, dirent->d_name + namlen))
+		goto Efault;
 	buf->previous = dirent;
-	put_user(d_ino, &dirent->d_ino);
-	put_user(reclen, &dirent->d_reclen);
-	put_user(namlen, &dirent->d_namlen);
-	copy_to_user(dirent->d_name, name, namlen);
-	put_user(0, dirent->d_name + namlen);
-	dirent = (void __user *)dirent + reclen;
-	buf->current_dir = dirent;
+	buf->current_dir = (void __user *)dirent + reclen;
 	buf->count -= reclen;
 	return 0;
+Efault:
+	buf->error = -EFAULT;
+	return -EFAULT;
 }
 
 #undef NAME_OFFSET
@@ -126,8 +132,10 @@ int hpux_getdents(unsigned int fd, struct hpux_dirent __user *dirent, unsigned i
 	error = buf.error;
 	lastdirent = buf.previous;
 	if (lastdirent) {
-		put_user(file->f_pos, &lastdirent->d_off);
-		error = count - buf.count;
+		if (put_user(file->f_pos, &lastdirent->d_off))
+			error = -EFAULT;
+		else
+			error = count - buf.count;
 	}
 
 out_putf:
diff --git a/arch/parisc/hpux/sys_hpux.c b/arch/parisc/hpux/sys_hpux.c
index be255ebb609c..18072e03a019 100644
--- a/arch/parisc/hpux/sys_hpux.c
+++ b/arch/parisc/hpux/sys_hpux.c
@@ -210,19 +210,19 @@ static int vfs_statfs_hpux(struct dentry *dentry, struct hpux_statfs *buf)
 }
 
 /* hpux statfs */
-asmlinkage long hpux_statfs(const char __user *path,
+asmlinkage long hpux_statfs(const char __user *pathname,
 						struct hpux_statfs __user *buf)
 {
-	struct nameidata nd;
+	struct path path;
 	int error;
 
-	error = user_path_walk(path, &nd);
+	error = user_path(pathname, &path);
 	if (!error) {
 		struct hpux_statfs tmp;
-		error = vfs_statfs_hpux(nd.path.dentry, &tmp);
+		error = vfs_statfs_hpux(path.dentry, &tmp);
 		if (!error && copy_to_user(buf, &tmp, sizeof(tmp)))
 			error = -EFAULT;
-		path_put(&nd.path);
+		path_put(&path);
 	}
 	return error;
 }
diff --git a/arch/powerpc/.gitignore b/arch/powerpc/.gitignore
deleted file mode 100644
index a1a869c8c840..000000000000
--- a/arch/powerpc/.gitignore
+++ /dev/null
@@ -1 +0,0 @@
-include
diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
index a487671c282f..587da5e0990f 100644
--- a/arch/powerpc/Kconfig
+++ b/arch/powerpc/Kconfig
@@ -110,11 +110,14 @@ config PPC
 	default y
 	select HAVE_DYNAMIC_FTRACE
 	select HAVE_FTRACE
+	select ARCH_WANT_OPTIONAL_GPIOLIB
 	select HAVE_IDE
 	select HAVE_IOREMAP_PROT
+	select HAVE_EFFICIENT_UNALIGNED_ACCESS
 	select HAVE_KPROBES
 	select HAVE_ARCH_KGDB
 	select HAVE_KRETPROBES
+	select HAVE_ARCH_TRACEHOOK
 	select HAVE_LMB
 	select HAVE_DMA_ATTRS if PPC64
 	select USE_GENERIC_SMP_HELPERS if SMP
diff --git a/arch/powerpc/Kconfig.debug b/arch/powerpc/Kconfig.debug
index 8c8aadbe9563..4ebc52a19f0a 100644
--- a/arch/powerpc/Kconfig.debug
+++ b/arch/powerpc/Kconfig.debug
@@ -97,7 +97,7 @@ config IRQSTACKS
 
 config VIRQ_DEBUG
 	bool "Expose hardware/virtual IRQ mapping via debugfs"
-	depends on DEBUG_FS && PPC_MERGE
+	depends on DEBUG_FS
 	help
 	  This option will show the mapping relationship between hardware irq
 	  numbers and virtual irq numbers. The mapping is exposed via debugfs
diff --git a/arch/powerpc/Makefile b/arch/powerpc/Makefile
index 9155c9312c1e..c6be19e9ceae 100644
--- a/arch/powerpc/Makefile
+++ b/arch/powerpc/Makefile
@@ -116,6 +116,11 @@ ifeq ($(CONFIG_6xx),y)
 KBUILD_CFLAGS		+= -mcpu=powerpc
 endif
 
+# Work around a gcc code-gen bug with -fno-omit-frame-pointer.
+ifeq ($(CONFIG_FTRACE),y)
+KBUILD_CFLAGS		+= -mno-sched-epilog
+endif
+
 cpu-as-$(CONFIG_4xx)		+= -Wa,-m405
 cpu-as-$(CONFIG_6xx)		+= -Wa,-maltivec
 cpu-as-$(CONFIG_POWER4)		+= -Wa,-maltivec
diff --git a/arch/powerpc/boot/dts/mpc832x_mds.dts b/arch/powerpc/boot/dts/mpc832x_mds.dts
index 7345743d3d96..fbc930410ff6 100644
--- a/arch/powerpc/boot/dts/mpc832x_mds.dts
+++ b/arch/powerpc/boot/dts/mpc832x_mds.dts
@@ -68,6 +68,7 @@
 		#address-cells = <1>;
 		#size-cells = <1>;
 		device_type = "soc";
+		compatible = "simple-bus";
 		ranges = <0x0 0xe0000000 0x00100000>;
 		reg = <0xe0000000 0x00000200>;
 		bus-frequency = <132000000>;
diff --git a/arch/powerpc/boot/dts/mpc832x_rdb.dts b/arch/powerpc/boot/dts/mpc832x_rdb.dts
index e74c045a0f8c..b157d1885a28 100644
--- a/arch/powerpc/boot/dts/mpc832x_rdb.dts
+++ b/arch/powerpc/boot/dts/mpc832x_rdb.dts
@@ -51,6 +51,7 @@
 		#address-cells = <1>;
 		#size-cells = <1>;
 		device_type = "soc";
+		compatible = "simple-bus";
 		ranges = <0x0 0xe0000000 0x00100000>;
 		reg = <0xe0000000 0x00000200>;
 		bus-frequency = <0>;
diff --git a/arch/powerpc/boot/dts/mpc8349emitx.dts b/arch/powerpc/boot/dts/mpc8349emitx.dts
index 8dfab5662585..700e076ef3f5 100644
--- a/arch/powerpc/boot/dts/mpc8349emitx.dts
+++ b/arch/powerpc/boot/dts/mpc8349emitx.dts
@@ -52,6 +52,7 @@
 		#address-cells = <1>;
 		#size-cells = <1>;
 		device_type = "soc";
+		compatible = "simple-bus";
 		ranges = <0x0 0xe0000000 0x00100000>;
 		reg = <0xe0000000 0x00000200>;
 		bus-frequency = <0>;                    // from bootloader
diff --git a/arch/powerpc/boot/dts/mpc8349emitxgp.dts b/arch/powerpc/boot/dts/mpc8349emitxgp.dts
index 49ca3497eefb..cdd3063258ea 100644
--- a/arch/powerpc/boot/dts/mpc8349emitxgp.dts
+++ b/arch/powerpc/boot/dts/mpc8349emitxgp.dts
@@ -50,6 +50,7 @@
 		#address-cells = <1>;
 		#size-cells = <1>;
 		device_type = "soc";
+		compatible = "simple-bus";
 		ranges = <0x0 0xe0000000 0x00100000>;
 		reg = <0xe0000000 0x00000200>;
 		bus-frequency = <0>;                    // from bootloader
diff --git a/arch/powerpc/boot/dts/mpc834x_mds.dts b/arch/powerpc/boot/dts/mpc834x_mds.dts
index ba586cb7afbb..783241c00240 100644
--- a/arch/powerpc/boot/dts/mpc834x_mds.dts
+++ b/arch/powerpc/boot/dts/mpc834x_mds.dts
@@ -57,6 +57,7 @@
 		#address-cells = <1>;
 		#size-cells = <1>;
 		device_type = "soc";
+		compatible = "simple-bus";
 		ranges = <0x0 0xe0000000 0x00100000>;
 		reg = <0xe0000000 0x00000200>;
 		bus-frequency = <0>;
diff --git a/arch/powerpc/boot/dts/mpc836x_mds.dts b/arch/powerpc/boot/dts/mpc836x_mds.dts
index 3701dae1ee02..a3b76a709951 100644
--- a/arch/powerpc/boot/dts/mpc836x_mds.dts
+++ b/arch/powerpc/boot/dts/mpc836x_mds.dts
@@ -61,6 +61,7 @@
 		#address-cells = <1>;
 		#size-cells = <1>;
 		device_type = "soc";
+		compatible = "simple-bus";
 		ranges = <0x0 0xe0000000 0x00100000>;
 		reg = <0xe0000000 0x00000200>;
 		bus-frequency = <264000000>;
diff --git a/arch/powerpc/boot/dts/mpc836x_rdk.dts b/arch/powerpc/boot/dts/mpc836x_rdk.dts
index 8acd1d6577f2..89c9202f8bd7 100644
--- a/arch/powerpc/boot/dts/mpc836x_rdk.dts
+++ b/arch/powerpc/boot/dts/mpc836x_rdk.dts
@@ -149,18 +149,14 @@
 		};
 
 		crypto@30000 {
-			compatible = "fsl,sec2-crypto";
+			compatible = "fsl,sec2.0";
 			reg = <0x30000 0x10000>;
-			interrupts = <11 8>;
+			interrupts = <11 0x8>;
 			interrupt-parent = <&ipic>;
-			num-channels = <4>;
-			channel-fifo-len = <24>;
-			exec-units-mask = <0x7e>;
-			/*
-			 * desc mask is for rev1.x, we need runtime fixup
-			 * for >=2.x
-			 */
-			descriptor-types-mask = <0x1010ebf>;
+			fsl,num-channels = <4>;
+			fsl,channel-fifo-len = <24>;
+			fsl,exec-units-mask = <0x7e>;
+			fsl,descriptor-types-mask = <0x01010ebf>;
 		};
 
 		ipic: interrupt-controller@700 {
diff --git a/arch/powerpc/boot/dts/mpc8377_mds.dts b/arch/powerpc/boot/dts/mpc8377_mds.dts
index 0a700cb5f611..432782b6d20a 100644
--- a/arch/powerpc/boot/dts/mpc8377_mds.dts
+++ b/arch/powerpc/boot/dts/mpc8377_mds.dts
@@ -117,6 +117,7 @@
 		#address-cells = <1>;
 		#size-cells = <1>;
 		device_type = "soc";
+		compatible = "simple-bus";
 		ranges = <0x0 0xe0000000 0x00100000>;
 		reg = <0xe0000000 0x00000200>;
 		bus-frequency = <0>;
diff --git a/arch/powerpc/boot/dts/mpc8378_mds.dts b/arch/powerpc/boot/dts/mpc8378_mds.dts
index 29c8c76a58f7..ed32c8ddafe3 100644
--- a/arch/powerpc/boot/dts/mpc8378_mds.dts
+++ b/arch/powerpc/boot/dts/mpc8378_mds.dts
@@ -117,6 +117,7 @@
 		#address-cells = <1>;
 		#size-cells = <1>;
 		device_type = "soc";
+		compatible = "simple-bus";
 		ranges = <0x0 0xe0000000 0x00100000>;
 		reg = <0xe0000000 0x00000200>;
 		bus-frequency = <0>;
diff --git a/arch/powerpc/boot/dts/mpc8379_mds.dts b/arch/powerpc/boot/dts/mpc8379_mds.dts
index d641a8985ea3..f4db9ed4a301 100644
--- a/arch/powerpc/boot/dts/mpc8379_mds.dts
+++ b/arch/powerpc/boot/dts/mpc8379_mds.dts
@@ -117,6 +117,7 @@
 		#address-cells = <1>;
 		#size-cells = <1>;
 		device_type = "soc";
+		compatible = "simple-bus";
 		ranges = <0x0 0xe0000000 0x00100000>;
 		reg = <0xe0000000 0x00000200>;
 		bus-frequency = <0>;
diff --git a/arch/powerpc/boot/dts/mpc8536ds.dts b/arch/powerpc/boot/dts/mpc8536ds.dts
index 02cfa24a1695..1505d6855eff 100644
--- a/arch/powerpc/boot/dts/mpc8536ds.dts
+++ b/arch/powerpc/boot/dts/mpc8536ds.dts
@@ -49,6 +49,7 @@
 		#address-cells = <1>;
 		#size-cells = <1>;
 		device_type = "soc";
+		compatible = "simple-bus";
 		ranges = <0x0 0xffe00000 0x100000>;
 		reg = <0xffe00000 0x1000>;
 		bus-frequency = <0>;		// Filled out by uboot.
diff --git a/arch/powerpc/boot/dts/mpc8540ads.dts b/arch/powerpc/boot/dts/mpc8540ads.dts
index f2273a872b11..9568bfaff8f7 100644
--- a/arch/powerpc/boot/dts/mpc8540ads.dts
+++ b/arch/powerpc/boot/dts/mpc8540ads.dts
@@ -53,6 +53,7 @@
 		#address-cells = <1>;
 		#size-cells = <1>;
 		device_type = "soc";
+		compatible = "simple-bus";
 		ranges = <0x0 0xe0000000 0x100000>;
 		reg = <0xe0000000 0x100000>;	// CCSRBAR 1M
 		bus-frequency = <0>;
diff --git a/arch/powerpc/boot/dts/mpc8541cds.dts b/arch/powerpc/boot/dts/mpc8541cds.dts
index c4469f19ff82..6480f4fd96e0 100644
--- a/arch/powerpc/boot/dts/mpc8541cds.dts
+++ b/arch/powerpc/boot/dts/mpc8541cds.dts
@@ -53,6 +53,7 @@
 		#address-cells = <1>;
 		#size-cells = <1>;
 		device_type = "soc";
+		compatible = "simple-bus";
 		ranges = <0x0 0xe0000000 0x100000>;
 		reg = <0xe0000000 0x1000>;	// CCSRBAR 1M
 		bus-frequency = <0>;
diff --git a/arch/powerpc/boot/dts/mpc8544ds.dts b/arch/powerpc/boot/dts/mpc8544ds.dts
index 7d3829d3495e..f1fb20737e3e 100644
--- a/arch/powerpc/boot/dts/mpc8544ds.dts
+++ b/arch/powerpc/boot/dts/mpc8544ds.dts
@@ -54,6 +54,7 @@
 		#address-cells = <1>;
 		#size-cells = <1>;
 		device_type = "soc";
+		compatible = "simple-bus";
 
 		ranges = <0x0 0xe0000000 0x100000>;
 		reg = <0xe0000000 0x1000>;	// CCSRBAR 1M
diff --git a/arch/powerpc/boot/dts/mpc8548cds.dts b/arch/powerpc/boot/dts/mpc8548cds.dts
index d84466bb7eca..431b496270dc 100644
--- a/arch/powerpc/boot/dts/mpc8548cds.dts
+++ b/arch/powerpc/boot/dts/mpc8548cds.dts
@@ -58,6 +58,7 @@
 		#address-cells = <1>;
 		#size-cells = <1>;
 		device_type = "soc";
+		compatible = "simple-bus";
 		ranges = <0x0 0xe0000000 0x100000>;
 		reg = <0xe0000000 0x1000>;	// CCSRBAR
 		bus-frequency = <0>;
diff --git a/arch/powerpc/boot/dts/mpc8555cds.dts b/arch/powerpc/boot/dts/mpc8555cds.dts
index e03a78006283..d833a5c4f476 100644
--- a/arch/powerpc/boot/dts/mpc8555cds.dts
+++ b/arch/powerpc/boot/dts/mpc8555cds.dts
@@ -53,6 +53,7 @@
 		#address-cells = <1>;
 		#size-cells = <1>;
 		device_type = "soc";
+		compatible = "simple-bus";
 		ranges = <0x0 0xe0000000 0x100000>;
 		reg = <0xe0000000 0x1000>;	// CCSRBAR 1M
 		bus-frequency = <0>;
diff --git a/arch/powerpc/boot/dts/mpc8560ads.dts b/arch/powerpc/boot/dts/mpc8560ads.dts
index ba8159de040b..4d1f2f284094 100644
--- a/arch/powerpc/boot/dts/mpc8560ads.dts
+++ b/arch/powerpc/boot/dts/mpc8560ads.dts
@@ -53,6 +53,7 @@
 		#address-cells = <1>;
 		#size-cells = <1>;
 		device_type = "soc";
+		compatible = "simple-bus";
 		ranges = <0x0 0xe0000000 0x100000>;
 		reg = <0xe0000000 0x200>;
 		bus-frequency = <330000000>;
diff --git a/arch/powerpc/boot/dts/mpc8568mds.dts b/arch/powerpc/boot/dts/mpc8568mds.dts
index 9c30a34821dc..a15f10343f53 100644
--- a/arch/powerpc/boot/dts/mpc8568mds.dts
+++ b/arch/powerpc/boot/dts/mpc8568mds.dts
@@ -60,6 +60,7 @@
 		#address-cells = <1>;
 		#size-cells = <1>;
 		device_type = "soc";
+		compatible = "simple-bus";
 		ranges = <0x0 0xe0000000 0x100000>;
 		reg = <0xe0000000 0x1000>;
 		bus-frequency = <0>;
diff --git a/arch/powerpc/boot/dts/mpc8572ds.dts b/arch/powerpc/boot/dts/mpc8572ds.dts
index 08c61e3daecc..e124dd18fb5a 100644
--- a/arch/powerpc/boot/dts/mpc8572ds.dts
+++ b/arch/powerpc/boot/dts/mpc8572ds.dts
@@ -68,6 +68,7 @@
 		#address-cells = <1>;
 		#size-cells = <1>;
 		device_type = "soc";
+		compatible = "simple-bus";
 		ranges = <0x0 0xffe00000 0x100000>;
 		reg = <0xffe00000 0x1000>;	// CCSRBAR & soc regs, remove once parse code for immrbase fixed
 		bus-frequency = <0>;		// Filled out by uboot.
diff --git a/arch/powerpc/boot/dts/mpc8610_hpcd.dts b/arch/powerpc/boot/dts/mpc8610_hpcd.dts
index 666185f59459..3b3a1062cb25 100644
--- a/arch/powerpc/boot/dts/mpc8610_hpcd.dts
+++ b/arch/powerpc/boot/dts/mpc8610_hpcd.dts
@@ -202,6 +202,11 @@
 			fsl,has-rstcr;
 		};
 
+		wdt@e4000 {
+			compatible = "fsl,mpc8610-wdt";
+			reg = <0xe4000 0x100>;
+		};
+
 		i2s@16000 {
 			compatible = "fsl,mpc8610-ssi";
 			cell-index = <0>;
diff --git a/arch/powerpc/boot/dts/mpc8641_hpcn.dts b/arch/powerpc/boot/dts/mpc8641_hpcn.dts
index ae08761ffff1..d665e767822a 100644
--- a/arch/powerpc/boot/dts/mpc8641_hpcn.dts
+++ b/arch/powerpc/boot/dts/mpc8641_hpcn.dts
@@ -411,7 +411,7 @@
 			0xe000 0 0 1 &i8259 12 2
 			0xe100 0 0 2 &i8259 9 2
 			0xe200 0 0 3 &i8259 10 2
-			0xe300 0 0 4 &i8259 112
+			0xe300 0 0 4 &i8259 11 2
 
 			// IDSEL 0x1d  Audio
 			0xe800 0 0 1 &i8259 6 2
diff --git a/arch/powerpc/boot/dts/tqm8548-bigflash.dts b/arch/powerpc/boot/dts/tqm8548-bigflash.dts
index 64d2d5bbcdf1..4199e89b4e50 100644
--- a/arch/powerpc/boot/dts/tqm8548-bigflash.dts
+++ b/arch/powerpc/boot/dts/tqm8548-bigflash.dts
@@ -50,13 +50,14 @@
 		reg = <0x00000000 0x00000000>;	// Filled in by U-Boot
 	};
 
-	soc8548@a0000000 {
+	soc@a0000000 {
 		#address-cells = <1>;
 		#size-cells = <1>;
 		device_type = "soc";
 		ranges = <0x0 0xa0000000 0x100000>;
 		reg = <0xa0000000 0x1000>;	// CCSRBAR
 		bus-frequency = <0>;
+		compatible = "fsl,mpc8548-immr", "simple-bus";
 
 		memory-controller@2000 {
 			compatible = "fsl,mpc8548-memory-controller";
@@ -83,6 +84,11 @@
 			interrupts = <43 2>;
 			interrupt-parent = <&mpic>;
 			dfsrr;
+
+			rtc@68 {
+				compatible = "dallas,ds1337";
+				reg = <0x68>;
+			};
 		};
 
 		i2c@3100 {
diff --git a/arch/powerpc/boot/dts/tqm8548.dts b/arch/powerpc/boot/dts/tqm8548.dts
index 2563112cabd3..58ee4185454b 100644
--- a/arch/powerpc/boot/dts/tqm8548.dts
+++ b/arch/powerpc/boot/dts/tqm8548.dts
@@ -50,13 +50,14 @@
 		reg = <0x00000000 0x00000000>;	// Filled in by U-Boot
 	};
 
-	soc8548@e0000000 {
+	soc@e0000000 {
 		#address-cells = <1>;
 		#size-cells = <1>;
 		device_type = "soc";
 		ranges = <0x0 0xe0000000 0x100000>;
 		reg = <0xe0000000 0x1000>;	// CCSRBAR
 		bus-frequency = <0>;
+		compatible = "fsl,mpc8548-immr", "simple-bus";
 
 		memory-controller@2000 {
 			compatible = "fsl,mpc8548-memory-controller";
diff --git a/arch/powerpc/boot/dts/warp.dts b/arch/powerpc/boot/dts/warp.dts
index 340018cf16b7..f4e4ba69eef7 100644
--- a/arch/powerpc/boot/dts/warp.dts
+++ b/arch/powerpc/boot/dts/warp.dts
@@ -139,6 +139,11 @@
 					interrupt-parent = <&UIC0>;
 				};
 
+				fpga@2,2000 {
+					compatible = "pika,fpga-sgl";
+			   		reg = <0x00000002 0x00002000 0x00000200>;
+				};
+
 				fpga@2,4000 {
 					compatible = "pika,fpga-sd";
 					reg = <0x00000002 0x00004000 0x00000A00>;
@@ -152,7 +157,7 @@
 					#size-cells = <1>;
 					partition@300000 {
 						label = "fpga";
-						reg = <0x0030000 0x00040000>;
+						reg = <0x0300000 0x00040000>;
 					};
 					partition@340000 {
 						label = "env";
@@ -181,7 +186,6 @@
 				reg = <0xef600700 0x00000014>;
 				interrupt-parent = <&UIC0>;
 				interrupts = <0x2 0x4>;
-				index = <0x0>;
 				#address-cells = <1>;
 				#size-cells = <0>;
 
@@ -191,6 +195,12 @@
 					interrupts = <0x19 0x8>;
 					interrupt-parent = <&UIC0>;
 				};
+
+				/* This will create 52 and 53 */
+				at24@52 {
+					compatible = "at,24c04";
+					reg = <0x52>;
+				};
 			};
 
 			GPIO0: gpio@ef600b00 {
@@ -209,7 +219,13 @@
 				led@31 {
 					compatible = "linux,gpio-led";
 					linux,name = ":green:";
-					gpios = <&GPIO1 0x30 0>;
+					gpios = <&GPIO1 31 0>;
+				};		
+	
+				led@30 {	
+					compatible = "linux,gpio-led";
+					linux,name = ":red:";
+					gpios = <&GPIO1 30 0>;
 				};
 			};
 
diff --git a/arch/powerpc/boot/io.h b/arch/powerpc/boot/io.h
index ccaedaec50d5..7c09f4861fe1 100644
--- a/arch/powerpc/boot/io.h
+++ b/arch/powerpc/boot/io.h
@@ -6,7 +6,7 @@
 /*
  * Low-level I/O routines.
  *
- * Copied from <file:include/asm-powerpc/io.h> (which has no copyright)
+ * Copied from <file:arch/powerpc/include/asm/io.h> (which has no copyright)
  */
 static inline int in_8(const volatile unsigned char *addr)
 {
diff --git a/arch/powerpc/boot/wrapper b/arch/powerpc/boot/wrapper
index 644bf9d4ea00..965c237c122d 100755
--- a/arch/powerpc/boot/wrapper
+++ b/arch/powerpc/boot/wrapper
@@ -165,7 +165,7 @@ cuboot*)
     binary=y
     gzip=
     case "$platform" in
-    *-mpc885ads|*-adder875*|*-ep88xc)
+    *-mpc866ads|*-mpc885ads|*-adder875*|*-ep88xc)
         platformo=$object/cuboot-8xx.o
         ;;
     *5200*|*-motionpro)
diff --git a/arch/powerpc/configs/40x/ep405_defconfig b/arch/powerpc/configs/40x/ep405_defconfig
index e24240a9a047..2113ae2ab401 100644
--- a/arch/powerpc/configs/40x/ep405_defconfig
+++ b/arch/powerpc/configs/40x/ep405_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.25-rc2
-# Fri Feb 15 21:50:09 2008
+# Linux kernel version: 2.6.27-rc1
+# Tue Aug  5 19:34:03 2008
 #
 # CONFIG_PPC64 is not set
 
@@ -26,8 +26,12 @@ CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_TIME_VSYSCALL=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
+# CONFIG_HAVE_GET_USER_PAGES_FAST is not set
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
 CONFIG_GENERIC_HWEIGHT=y
@@ -75,6 +79,7 @@ CONFIG_FAIR_GROUP_SCHED=y
 CONFIG_USER_SCHED=y
 # CONFIG_CGROUP_SCHED is not set
 CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_RELAY is not set
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
@@ -83,6 +88,7 @@ CONFIG_INITRAMFS_SOURCE=""
 CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
 CONFIG_KALLSYMS_EXTRA_PASS=y
@@ -108,13 +114,22 @@ CONFIG_SLUB=y
 # CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
+CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
+# CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+# CONFIG_HAVE_CLK is not set
 CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
@@ -125,6 +140,7 @@ CONFIG_LBD=y
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -139,14 +155,11 @@ CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
 CONFIG_CLASSIC_RCU=y
-# CONFIG_PREEMPT_RCU is not set
 # CONFIG_PPC4xx_PCI_EXPRESS is not set
 
 #
 # Platform support
 #
-# CONFIG_PPC_MPC512x is not set
-# CONFIG_PPC_MPC5121 is not set
 # CONFIG_PPC_CELL is not set
 # CONFIG_PPC_CELL_NATIVE is not set
 # CONFIG_PQ2ADS is not set
@@ -188,7 +201,6 @@ CONFIG_HZ=250
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
-CONFIG_RCU_TRACE=y
 CONFIG_BINFMT_ELF=y
 # CONFIG_BINFMT_MISC is not set
 # CONFIG_MATH_EMULATION is not set
@@ -206,13 +218,17 @@ CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
 # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_MIGRATION=y
 # CONFIG_RESOURCES_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
+CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
+CONFIG_EXTRA_TARGETS=""
 # CONFIG_PM is not set
 CONFIG_SECCOMP=y
 CONFIG_ISA_DMA_API=y
@@ -222,6 +238,8 @@ CONFIG_ISA_DMA_API=y
 #
 CONFIG_ZONE_DMA=y
 CONFIG_PPC_INDIRECT_PCI=y
+CONFIG_4xx_SOC=y
+CONFIG_PPC_PCI_CHOICE=y
 CONFIG_PCI=y
 CONFIG_PCI_DOMAINS=y
 CONFIG_PCI_SYSCALL=y
@@ -232,6 +250,7 @@ CONFIG_PCI_LEGACY=y
 # CONFIG_PCI_DEBUG is not set
 # CONFIG_PCCARD is not set
 # CONFIG_HOTPLUG_PCI is not set
+# CONFIG_HAS_RAPIDIO is not set
 
 #
 # Advanced setup
@@ -241,17 +260,13 @@ CONFIG_PCI_LEGACY=y
 #
 # Default settings for advanced configuration options are used
 #
-CONFIG_HIGHMEM_START=0xfe000000
 CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_PAGE_OFFSET=0xc0000000
 CONFIG_KERNEL_START=0xc0000000
+CONFIG_PHYSICAL_START=0x00000000
 CONFIG_TASK_SIZE=0xc0000000
 CONFIG_CONSISTENT_START=0xff100000
 CONFIG_CONSISTENT_SIZE=0x00200000
-CONFIG_BOOT_LOAD=0x00400000
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -289,8 +304,6 @@ CONFIG_TCP_CONG_CUBIC=y
 CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
 # CONFIG_NETWORK_SECMARK is not set
 # CONFIG_NETFILTER is not set
 # CONFIG_IP_DCCP is not set
@@ -340,6 +353,8 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_DEBUG_DRIVER is not set
 # CONFIG_DEBUG_DEVRES is not set
 # CONFIG_SYS_HYPERVISOR is not set
@@ -352,6 +367,7 @@ CONFIG_MTD_PARTITIONS=y
 # CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
 CONFIG_MTD_OF_PARTS=y
+# CONFIG_MTD_AR7_PARTS is not set
 
 #
 # User Modules And Translation Layers
@@ -443,12 +459,14 @@ CONFIG_BLK_DEV_RAM_SIZE=35000
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
 # CONFIG_XILINX_SYSACE is not set
+# CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_PHANTOM is not set
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_HP_ILO is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -466,12 +484,15 @@ CONFIG_HAVE_IDE=y
 #
 # IEEE 1394 (FireWire) support
 #
+
+#
+# Enable only one of the two stacks, unless you know what you are doing
+#
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -506,7 +527,6 @@ CONFIG_NETDEV_1000=y
 # CONFIG_DL2K is not set
 # CONFIG_E1000 is not set
 # CONFIG_E1000E is not set
-# CONFIG_E1000E_ENABLED is not set
 # CONFIG_IP1000 is not set
 # CONFIG_IGB is not set
 # CONFIG_NS83820 is not set
@@ -516,12 +536,12 @@ CONFIG_NETDEV_1000=y
 # CONFIG_SIS190 is not set
 # CONFIG_SKGE is not set
 # CONFIG_SKY2 is not set
-# CONFIG_SK98LIN is not set
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
+# CONFIG_ATL1E is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
 # CONFIG_CHELSIO_T3 is not set
@@ -534,6 +554,7 @@ CONFIG_NETDEV_10000=y
 # CONFIG_MLX4_CORE is not set
 # CONFIG_TEHUTI is not set
 # CONFIG_BNX2X is not set
+# CONFIG_SFC is not set
 # CONFIG_TR is not set
 
 #
@@ -541,6 +562,7 @@ CONFIG_NETDEV_10000=y
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
 
 #
 # USB Network Adapters
@@ -576,6 +598,7 @@ CONFIG_NETDEV_10000=y
 # Character devices
 #
 # CONFIG_VT is not set
+CONFIG_DEVKMEM=y
 # CONFIG_SERIAL_NONSTANDARD is not set
 # CONFIG_NOZOMI is not set
 
@@ -614,12 +637,9 @@ CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_TCG_TPM is not set
 CONFIG_DEVPORT=y
 # CONFIG_I2C is not set
-
-#
-# SPI support
-#
 # CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+# CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
@@ -635,13 +655,24 @@ CONFIG_SSB_POSSIBLE=y
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
 
 #
 # Multimedia devices
 #
+
+#
+# Multimedia core support
+#
 # CONFIG_VIDEO_DEV is not set
 # CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
 # CONFIG_DAB is not set
 
 #
@@ -658,10 +689,6 @@ CONFIG_VIDEO_OUTPUT_CONTROL=m
 # Display device support
 #
 # CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Sound
-#
 # CONFIG_SOUND is not set
 CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
@@ -678,12 +705,16 @@ CONFIG_USB_DEVICEFS=y
 CONFIG_USB_DEVICE_CLASS=y
 # CONFIG_USB_DYNAMIC_MINORS is not set
 # CONFIG_USB_OTG is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
 
 #
 # USB Host Controller Drivers
 #
+# CONFIG_USB_C67X00_HCD is not set
 # CONFIG_USB_EHCI_HCD is not set
 # CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
 CONFIG_USB_OHCI_HCD=y
 CONFIG_USB_OHCI_HCD_PPC_OF=y
 CONFIG_USB_OHCI_HCD_PPC_OF_BE=y
@@ -701,6 +732,7 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y
 #
 # CONFIG_USB_ACM is not set
 # CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
 
 #
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
@@ -744,17 +776,16 @@ CONFIG_USB_MON=y
 # CONFIG_USB_TRANCEVIBRATOR is not set
 # CONFIG_USB_IOWARRIOR is not set
 # CONFIG_USB_TEST is not set
+# CONFIG_USB_ISIGHTFW is not set
 # CONFIG_USB_GADGET is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
 # CONFIG_INFINIBAND is not set
 # CONFIG_EDAC is not set
 # CONFIG_RTC_CLASS is not set
-
-#
-# Userspace I/O
-#
+# CONFIG_DMADEVICES is not set
 # CONFIG_UIO is not set
 
 #
@@ -769,7 +800,6 @@ CONFIG_EXT2_FS=y
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
 # CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
@@ -818,6 +848,7 @@ CONFIG_TMPFS=y
 CONFIG_CRAMFS=y
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
 # CONFIG_ROMFS_FS is not set
@@ -828,14 +859,12 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 # CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -856,8 +885,10 @@ CONFIG_MSDOS_PARTITION=y
 # Library routines
 #
 CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
 # CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
@@ -867,6 +898,7 @@ CONFIG_PLIST=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
 
 #
 # Kernel hacking
@@ -874,6 +906,7 @@ CONFIG_HAS_DMA=y
 # CONFIG_PRINTK_TIME is not set
 CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
 # CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_FS=y
@@ -881,9 +914,12 @@ CONFIG_DEBUG_FS=y
 CONFIG_DEBUG_KERNEL=y
 # CONFIG_DEBUG_SHIRQ is not set
 CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
 CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
 # CONFIG_SLUB_DEBUG_ON is not set
 # CONFIG_SLUB_STATS is not set
 # CONFIG_DEBUG_RT_MUTEXES is not set
@@ -896,17 +932,30 @@ CONFIG_SCHED_DEBUG=y
 CONFIG_DEBUG_BUGVERBOSE=y
 # CONFIG_DEBUG_INFO is not set
 # CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+# CONFIG_FTRACE is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
 # CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
 # CONFIG_DEBUG_PAGEALLOC is not set
-# CONFIG_DEBUGGER is not set
+# CONFIG_CODE_PATCHING_SELFTEST is not set
+# CONFIG_FTR_FIXUP_SELFTEST is not set
+# CONFIG_XMON is not set
+# CONFIG_IRQSTACKS is not set
 # CONFIG_VIRQ_DEBUG is not set
 # CONFIG_BDI_SWITCH is not set
 # CONFIG_PPC_EARLY_DEBUG is not set
@@ -918,51 +967,85 @@ CONFIG_DEBUG_BUGVERBOSE=y
 # CONFIG_SECURITY is not set
 # CONFIG_SECURITY_FILE_CAPABILITIES is not set
 CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
 CONFIG_CRYPTO_ALGAPI=y
 CONFIG_CRYPTO_BLKCIPHER=y
-# CONFIG_CRYPTO_SEQIV is not set
 CONFIG_CRYPTO_MANAGER=y
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=y
+# CONFIG_CRYPTO_LRW is not set
+CONFIG_CRYPTO_PCBC=y
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
 # CONFIG_CRYPTO_HMAC is not set
 # CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_NULL is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
 # CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
 # CONFIG_CRYPTO_SHA1 is not set
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
 # CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-CONFIG_CRYPTO_ECB=y
-CONFIG_CRYPTO_CBC=y
-CONFIG_CRYPTO_PCBC=y
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_XTS is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
 # CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
 # CONFIG_CRYPTO_CAST5 is not set
 # CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
 # CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_SEED is not set
 # CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
 # CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_TEST is not set
-# CONFIG_CRYPTO_AUTHENC is not set
 # CONFIG_CRYPTO_LZO is not set
 CONFIG_CRYPTO_HW=y
 # CONFIG_CRYPTO_DEV_HIFN_795X is not set
 # CONFIG_PPC_CLOCK is not set
+# CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/40x/kilauea_defconfig b/arch/powerpc/configs/40x/kilauea_defconfig
index 2f475391f1d1..565ed9666c54 100644
--- a/arch/powerpc/configs/40x/kilauea_defconfig
+++ b/arch/powerpc/configs/40x/kilauea_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.25-rc2
-# Fri Feb 15 21:51:43 2008
+# Linux kernel version: 2.6.27-rc1
+# Tue Aug  5 19:36:14 2008
 #
 # CONFIG_PPC64 is not set
 
@@ -26,8 +26,12 @@ CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_TIME_VSYSCALL=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
+# CONFIG_HAVE_GET_USER_PAGES_FAST is not set
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
 CONFIG_GENERIC_HWEIGHT=y
@@ -75,6 +79,7 @@ CONFIG_GROUP_SCHED=y
 CONFIG_USER_SCHED=y
 # CONFIG_CGROUP_SCHED is not set
 CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_RELAY is not set
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
@@ -83,6 +88,7 @@ CONFIG_INITRAMFS_SOURCE=""
 CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
 CONFIG_KALLSYMS_EXTRA_PASS=y
@@ -108,13 +114,22 @@ CONFIG_SLUB=y
 # CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
+CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
+# CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+# CONFIG_HAVE_CLK is not set
 CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
@@ -125,6 +140,7 @@ CONFIG_LBD=y
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -139,14 +155,11 @@ CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
 CONFIG_CLASSIC_RCU=y
-# CONFIG_PREEMPT_RCU is not set
 CONFIG_PPC4xx_PCI_EXPRESS=y
 
 #
 # Platform support
 #
-# CONFIG_PPC_MPC512x is not set
-# CONFIG_PPC_MPC5121 is not set
 # CONFIG_PPC_CELL is not set
 # CONFIG_PPC_CELL_NATIVE is not set
 # CONFIG_PQ2ADS is not set
@@ -186,7 +199,6 @@ CONFIG_HZ=250
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
-CONFIG_RCU_TRACE=y
 CONFIG_BINFMT_ELF=y
 # CONFIG_BINFMT_MISC is not set
 # CONFIG_MATH_EMULATION is not set
@@ -204,13 +216,17 @@ CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
 # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_MIGRATION=y
 # CONFIG_RESOURCES_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
+CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
+CONFIG_EXTRA_TARGETS=""
 # CONFIG_PM is not set
 CONFIG_SECCOMP=y
 CONFIG_ISA_DMA_API=y
@@ -220,6 +236,8 @@ CONFIG_ISA_DMA_API=y
 #
 CONFIG_ZONE_DMA=y
 CONFIG_PPC_INDIRECT_PCI=y
+CONFIG_4xx_SOC=y
+CONFIG_PPC_PCI_CHOICE=y
 CONFIG_PCI=y
 CONFIG_PCI_DOMAINS=y
 CONFIG_PCI_SYSCALL=y
@@ -230,6 +248,7 @@ CONFIG_PCI_LEGACY=y
 # CONFIG_PCI_DEBUG is not set
 # CONFIG_PCCARD is not set
 # CONFIG_HOTPLUG_PCI is not set
+# CONFIG_HAS_RAPIDIO is not set
 
 #
 # Advanced setup
@@ -239,17 +258,13 @@ CONFIG_PCI_LEGACY=y
 #
 # Default settings for advanced configuration options are used
 #
-CONFIG_HIGHMEM_START=0xfe000000
 CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_PAGE_OFFSET=0xc0000000
 CONFIG_KERNEL_START=0xc0000000
+CONFIG_PHYSICAL_START=0x00000000
 CONFIG_TASK_SIZE=0xc0000000
 CONFIG_CONSISTENT_START=0xff100000
 CONFIG_CONSISTENT_SIZE=0x00200000
-CONFIG_BOOT_LOAD=0x00400000
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -287,8 +302,6 @@ CONFIG_TCP_CONG_CUBIC=y
 CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
 # CONFIG_NETWORK_SECMARK is not set
 # CONFIG_NETFILTER is not set
 # CONFIG_IP_DCCP is not set
@@ -338,6 +351,8 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_DEBUG_DRIVER is not set
 # CONFIG_DEBUG_DEVRES is not set
 # CONFIG_SYS_HYPERVISOR is not set
@@ -350,6 +365,7 @@ CONFIG_MTD_PARTITIONS=y
 # CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
 CONFIG_MTD_OF_PARTS=y
+# CONFIG_MTD_AR7_PARTS is not set
 
 #
 # User Modules And Translation Layers
@@ -440,6 +456,7 @@ CONFIG_BLK_DEV_RAM_SIZE=35000
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
 # CONFIG_XILINX_SYSACE is not set
+# CONFIG_BLK_DEV_HD is not set
 # CONFIG_MISC_DEVICES is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
@@ -458,12 +475,15 @@ CONFIG_HAVE_IDE=y
 #
 # IEEE 1394 (FireWire) support
 #
+
+#
+# Enable only one of the two stacks, unless you know what you are doing
+#
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -502,6 +522,7 @@ CONFIG_IBM_NEW_EMAC_EMAC4=y
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
 # CONFIG_WAN is not set
 # CONFIG_FDDI is not set
 # CONFIG_HIPPI is not set
@@ -528,6 +549,7 @@ CONFIG_IBM_NEW_EMAC_EMAC4=y
 # Character devices
 #
 # CONFIG_VT is not set
+CONFIG_DEVKMEM=y
 # CONFIG_SERIAL_NONSTANDARD is not set
 # CONFIG_NOZOMI is not set
 
@@ -566,12 +588,9 @@ CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_TCG_TPM is not set
 CONFIG_DEVPORT=y
 # CONFIG_I2C is not set
-
-#
-# SPI support
-#
 # CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+# CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
@@ -587,13 +606,24 @@ CONFIG_SSB_POSSIBLE=y
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
 
 #
 # Multimedia devices
 #
+
+#
+# Multimedia core support
+#
 # CONFIG_VIDEO_DEV is not set
 # CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
 # CONFIG_DAB is not set
 
 #
@@ -610,22 +640,16 @@ CONFIG_SSB_POSSIBLE=y
 # Display device support
 #
 # CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Sound
-#
 # CONFIG_SOUND is not set
 # CONFIG_USB_SUPPORT is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
 # CONFIG_INFINIBAND is not set
 # CONFIG_EDAC is not set
 # CONFIG_RTC_CLASS is not set
-
-#
-# Userspace I/O
-#
+# CONFIG_DMADEVICES is not set
 # CONFIG_UIO is not set
 
 #
@@ -640,7 +664,6 @@ CONFIG_EXT2_FS=y
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
 # CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
@@ -689,6 +712,7 @@ CONFIG_TMPFS=y
 CONFIG_CRAMFS=y
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
 # CONFIG_ROMFS_FS is not set
@@ -699,14 +723,12 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 # CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -727,8 +749,10 @@ CONFIG_MSDOS_PARTITION=y
 # Library routines
 #
 CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
 # CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
@@ -738,6 +762,7 @@ CONFIG_PLIST=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
 
 #
 # Kernel hacking
@@ -745,6 +770,7 @@ CONFIG_HAS_DMA=y
 # CONFIG_PRINTK_TIME is not set
 CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
 # CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_FS=y
@@ -752,9 +778,12 @@ CONFIG_DEBUG_FS=y
 CONFIG_DEBUG_KERNEL=y
 # CONFIG_DEBUG_SHIRQ is not set
 CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
 CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
 # CONFIG_SLUB_DEBUG_ON is not set
 # CONFIG_SLUB_STATS is not set
 # CONFIG_DEBUG_RT_MUTEXES is not set
@@ -767,17 +796,30 @@ CONFIG_SCHED_DEBUG=y
 CONFIG_DEBUG_BUGVERBOSE=y
 # CONFIG_DEBUG_INFO is not set
 # CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+# CONFIG_FTRACE is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
 # CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
 # CONFIG_DEBUG_PAGEALLOC is not set
-# CONFIG_DEBUGGER is not set
+# CONFIG_CODE_PATCHING_SELFTEST is not set
+# CONFIG_FTR_FIXUP_SELFTEST is not set
+# CONFIG_XMON is not set
+# CONFIG_IRQSTACKS is not set
 # CONFIG_VIRQ_DEBUG is not set
 # CONFIG_BDI_SWITCH is not set
 # CONFIG_PPC_EARLY_DEBUG is not set
@@ -789,51 +831,85 @@ CONFIG_DEBUG_BUGVERBOSE=y
 # CONFIG_SECURITY is not set
 # CONFIG_SECURITY_FILE_CAPABILITIES is not set
 CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
 CONFIG_CRYPTO_ALGAPI=y
 CONFIG_CRYPTO_BLKCIPHER=y
-# CONFIG_CRYPTO_SEQIV is not set
 CONFIG_CRYPTO_MANAGER=y
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=y
+# CONFIG_CRYPTO_LRW is not set
+CONFIG_CRYPTO_PCBC=y
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
 # CONFIG_CRYPTO_HMAC is not set
 # CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_NULL is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
 # CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
 # CONFIG_CRYPTO_SHA1 is not set
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
 # CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-CONFIG_CRYPTO_ECB=y
-CONFIG_CRYPTO_CBC=y
-CONFIG_CRYPTO_PCBC=y
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_XTS is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
 # CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
 # CONFIG_CRYPTO_CAST5 is not set
 # CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
 # CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_SEED is not set
 # CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
 # CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_TEST is not set
-# CONFIG_CRYPTO_AUTHENC is not set
 # CONFIG_CRYPTO_LZO is not set
 CONFIG_CRYPTO_HW=y
 # CONFIG_CRYPTO_DEV_HIFN_795X is not set
 # CONFIG_PPC_CLOCK is not set
+# CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/40x/makalu_defconfig b/arch/powerpc/configs/40x/makalu_defconfig
index 9ef4d8a312c8..987a4481800f 100644
--- a/arch/powerpc/configs/40x/makalu_defconfig
+++ b/arch/powerpc/configs/40x/makalu_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.25-rc2
-# Fri Feb 15 21:52:30 2008
+# Linux kernel version: 2.6.27-rc1
+# Tue Aug  5 19:38:39 2008
 #
 # CONFIG_PPC64 is not set
 
@@ -26,8 +26,12 @@ CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_TIME_VSYSCALL=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
+# CONFIG_HAVE_GET_USER_PAGES_FAST is not set
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
 CONFIG_GENERIC_HWEIGHT=y
@@ -75,6 +79,7 @@ CONFIG_GROUP_SCHED=y
 CONFIG_USER_SCHED=y
 # CONFIG_CGROUP_SCHED is not set
 CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_RELAY is not set
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
@@ -83,6 +88,7 @@ CONFIG_INITRAMFS_SOURCE=""
 CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
 CONFIG_KALLSYMS_EXTRA_PASS=y
@@ -108,13 +114,22 @@ CONFIG_SLUB=y
 # CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
+CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
+# CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+# CONFIG_HAVE_CLK is not set
 CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
@@ -125,6 +140,7 @@ CONFIG_LBD=y
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -139,14 +155,11 @@ CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
 CONFIG_CLASSIC_RCU=y
-# CONFIG_PREEMPT_RCU is not set
 CONFIG_PPC4xx_PCI_EXPRESS=y
 
 #
 # Platform support
 #
-# CONFIG_PPC_MPC512x is not set
-# CONFIG_PPC_MPC5121 is not set
 # CONFIG_PPC_CELL is not set
 # CONFIG_PPC_CELL_NATIVE is not set
 # CONFIG_PQ2ADS is not set
@@ -186,7 +199,6 @@ CONFIG_HZ=250
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
-CONFIG_RCU_TRACE=y
 CONFIG_BINFMT_ELF=y
 # CONFIG_BINFMT_MISC is not set
 # CONFIG_MATH_EMULATION is not set
@@ -204,13 +216,17 @@ CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
 # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_MIGRATION=y
 # CONFIG_RESOURCES_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
+CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
+CONFIG_EXTRA_TARGETS=""
 # CONFIG_PM is not set
 CONFIG_SECCOMP=y
 CONFIG_ISA_DMA_API=y
@@ -220,6 +236,8 @@ CONFIG_ISA_DMA_API=y
 #
 CONFIG_ZONE_DMA=y
 CONFIG_PPC_INDIRECT_PCI=y
+CONFIG_4xx_SOC=y
+CONFIG_PPC_PCI_CHOICE=y
 CONFIG_PCI=y
 CONFIG_PCI_DOMAINS=y
 CONFIG_PCI_SYSCALL=y
@@ -230,6 +248,7 @@ CONFIG_PCI_LEGACY=y
 # CONFIG_PCI_DEBUG is not set
 # CONFIG_PCCARD is not set
 # CONFIG_HOTPLUG_PCI is not set
+# CONFIG_HAS_RAPIDIO is not set
 
 #
 # Advanced setup
@@ -239,17 +258,13 @@ CONFIG_PCI_LEGACY=y
 #
 # Default settings for advanced configuration options are used
 #
-CONFIG_HIGHMEM_START=0xfe000000
 CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_PAGE_OFFSET=0xc0000000
 CONFIG_KERNEL_START=0xc0000000
+CONFIG_PHYSICAL_START=0x00000000
 CONFIG_TASK_SIZE=0xc0000000
 CONFIG_CONSISTENT_START=0xff100000
 CONFIG_CONSISTENT_SIZE=0x00200000
-CONFIG_BOOT_LOAD=0x00400000
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -287,8 +302,6 @@ CONFIG_TCP_CONG_CUBIC=y
 CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
 # CONFIG_NETWORK_SECMARK is not set
 # CONFIG_NETFILTER is not set
 # CONFIG_IP_DCCP is not set
@@ -338,6 +351,8 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_DEBUG_DRIVER is not set
 # CONFIG_DEBUG_DEVRES is not set
 # CONFIG_SYS_HYPERVISOR is not set
@@ -350,6 +365,7 @@ CONFIG_MTD_PARTITIONS=y
 # CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
 CONFIG_MTD_OF_PARTS=y
+# CONFIG_MTD_AR7_PARTS is not set
 
 #
 # User Modules And Translation Layers
@@ -440,6 +456,7 @@ CONFIG_BLK_DEV_RAM_SIZE=35000
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
 # CONFIG_XILINX_SYSACE is not set
+# CONFIG_BLK_DEV_HD is not set
 # CONFIG_MISC_DEVICES is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
@@ -458,12 +475,15 @@ CONFIG_HAVE_IDE=y
 #
 # IEEE 1394 (FireWire) support
 #
+
+#
+# Enable only one of the two stacks, unless you know what you are doing
+#
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -502,6 +522,7 @@ CONFIG_IBM_NEW_EMAC_EMAC4=y
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
 # CONFIG_WAN is not set
 # CONFIG_FDDI is not set
 # CONFIG_HIPPI is not set
@@ -528,6 +549,7 @@ CONFIG_IBM_NEW_EMAC_EMAC4=y
 # Character devices
 #
 # CONFIG_VT is not set
+CONFIG_DEVKMEM=y
 # CONFIG_SERIAL_NONSTANDARD is not set
 # CONFIG_NOZOMI is not set
 
@@ -566,12 +588,9 @@ CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_TCG_TPM is not set
 CONFIG_DEVPORT=y
 # CONFIG_I2C is not set
-
-#
-# SPI support
-#
 # CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+# CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
@@ -587,13 +606,24 @@ CONFIG_SSB_POSSIBLE=y
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
 
 #
 # Multimedia devices
 #
+
+#
+# Multimedia core support
+#
 # CONFIG_VIDEO_DEV is not set
 # CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
 # CONFIG_DAB is not set
 
 #
@@ -610,22 +640,16 @@ CONFIG_SSB_POSSIBLE=y
 # Display device support
 #
 # CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Sound
-#
 # CONFIG_SOUND is not set
 # CONFIG_USB_SUPPORT is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
 # CONFIG_INFINIBAND is not set
 # CONFIG_EDAC is not set
 # CONFIG_RTC_CLASS is not set
-
-#
-# Userspace I/O
-#
+# CONFIG_DMADEVICES is not set
 # CONFIG_UIO is not set
 
 #
@@ -640,7 +664,6 @@ CONFIG_EXT2_FS=y
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
 # CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
@@ -689,6 +712,7 @@ CONFIG_TMPFS=y
 CONFIG_CRAMFS=y
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
 # CONFIG_ROMFS_FS is not set
@@ -699,14 +723,12 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 # CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -727,8 +749,10 @@ CONFIG_MSDOS_PARTITION=y
 # Library routines
 #
 CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
 # CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
@@ -738,6 +762,7 @@ CONFIG_PLIST=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
 
 #
 # Kernel hacking
@@ -745,6 +770,7 @@ CONFIG_HAS_DMA=y
 # CONFIG_PRINTK_TIME is not set
 CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
 # CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_FS=y
@@ -752,9 +778,12 @@ CONFIG_DEBUG_FS=y
 CONFIG_DEBUG_KERNEL=y
 # CONFIG_DEBUG_SHIRQ is not set
 CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
 CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
 # CONFIG_SLUB_DEBUG_ON is not set
 # CONFIG_SLUB_STATS is not set
 # CONFIG_DEBUG_RT_MUTEXES is not set
@@ -767,17 +796,30 @@ CONFIG_SCHED_DEBUG=y
 CONFIG_DEBUG_BUGVERBOSE=y
 # CONFIG_DEBUG_INFO is not set
 # CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+# CONFIG_FTRACE is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
 # CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
 # CONFIG_DEBUG_PAGEALLOC is not set
-# CONFIG_DEBUGGER is not set
+# CONFIG_CODE_PATCHING_SELFTEST is not set
+# CONFIG_FTR_FIXUP_SELFTEST is not set
+# CONFIG_XMON is not set
+# CONFIG_IRQSTACKS is not set
 # CONFIG_VIRQ_DEBUG is not set
 # CONFIG_BDI_SWITCH is not set
 # CONFIG_PPC_EARLY_DEBUG is not set
@@ -789,51 +831,85 @@ CONFIG_DEBUG_BUGVERBOSE=y
 # CONFIG_SECURITY is not set
 # CONFIG_SECURITY_FILE_CAPABILITIES is not set
 CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
 CONFIG_CRYPTO_ALGAPI=y
 CONFIG_CRYPTO_BLKCIPHER=y
-# CONFIG_CRYPTO_SEQIV is not set
 CONFIG_CRYPTO_MANAGER=y
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=y
+# CONFIG_CRYPTO_LRW is not set
+CONFIG_CRYPTO_PCBC=y
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
 # CONFIG_CRYPTO_HMAC is not set
 # CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_NULL is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
 # CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
 # CONFIG_CRYPTO_SHA1 is not set
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
 # CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-CONFIG_CRYPTO_ECB=y
-CONFIG_CRYPTO_CBC=y
-CONFIG_CRYPTO_PCBC=y
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_XTS is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
 # CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
 # CONFIG_CRYPTO_CAST5 is not set
 # CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
 # CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_SEED is not set
 # CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
 # CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_TEST is not set
-# CONFIG_CRYPTO_AUTHENC is not set
 # CONFIG_CRYPTO_LZO is not set
 CONFIG_CRYPTO_HW=y
 # CONFIG_CRYPTO_DEV_HIFN_795X is not set
 # CONFIG_PPC_CLOCK is not set
+# CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/40x/walnut_defconfig b/arch/powerpc/configs/40x/walnut_defconfig
index 3b2689e5002a..aee79338f41f 100644
--- a/arch/powerpc/configs/40x/walnut_defconfig
+++ b/arch/powerpc/configs/40x/walnut_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.25-rc2
-# Fri Feb 15 21:54:12 2008
+# Linux kernel version: 2.6.27-rc1
+# Tue Aug  5 19:40:56 2008
 #
 # CONFIG_PPC64 is not set
 
@@ -26,8 +26,12 @@ CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_TIME_VSYSCALL=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
+# CONFIG_HAVE_GET_USER_PAGES_FAST is not set
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
 CONFIG_GENERIC_HWEIGHT=y
@@ -75,6 +79,7 @@ CONFIG_FAIR_GROUP_SCHED=y
 CONFIG_USER_SCHED=y
 # CONFIG_CGROUP_SCHED is not set
 CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_RELAY is not set
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
@@ -83,6 +88,7 @@ CONFIG_INITRAMFS_SOURCE=""
 CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
 CONFIG_KALLSYMS_EXTRA_PASS=y
@@ -108,13 +114,22 @@ CONFIG_SLUB=y
 # CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
+CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
+# CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+# CONFIG_HAVE_CLK is not set
 CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
@@ -125,6 +140,7 @@ CONFIG_LBD=y
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -139,14 +155,11 @@ CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
 CONFIG_CLASSIC_RCU=y
-# CONFIG_PREEMPT_RCU is not set
 # CONFIG_PPC4xx_PCI_EXPRESS is not set
 
 #
 # Platform support
 #
-# CONFIG_PPC_MPC512x is not set
-# CONFIG_PPC_MPC5121 is not set
 # CONFIG_PPC_CELL is not set
 # CONFIG_PPC_CELL_NATIVE is not set
 # CONFIG_PQ2ADS is not set
@@ -189,7 +202,6 @@ CONFIG_HZ=250
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
-CONFIG_RCU_TRACE=y
 CONFIG_BINFMT_ELF=y
 # CONFIG_BINFMT_MISC is not set
 # CONFIG_MATH_EMULATION is not set
@@ -207,13 +219,17 @@ CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
 # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_MIGRATION=y
 CONFIG_RESOURCES_64BIT=y
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
+CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
+CONFIG_EXTRA_TARGETS=""
 # CONFIG_PM is not set
 CONFIG_SECCOMP=y
 CONFIG_ISA_DMA_API=y
@@ -223,6 +239,8 @@ CONFIG_ISA_DMA_API=y
 #
 CONFIG_ZONE_DMA=y
 CONFIG_PPC_INDIRECT_PCI=y
+CONFIG_4xx_SOC=y
+CONFIG_PPC_PCI_CHOICE=y
 CONFIG_PCI=y
 CONFIG_PCI_DOMAINS=y
 CONFIG_PCI_SYSCALL=y
@@ -233,6 +251,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y
 # CONFIG_PCI_DEBUG is not set
 # CONFIG_PCCARD is not set
 # CONFIG_HOTPLUG_PCI is not set
+# CONFIG_HAS_RAPIDIO is not set
 
 #
 # Advanced setup
@@ -242,17 +261,13 @@ CONFIG_ARCH_SUPPORTS_MSI=y
 #
 # Default settings for advanced configuration options are used
 #
-CONFIG_HIGHMEM_START=0xfe000000
 CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_PAGE_OFFSET=0xc0000000
 CONFIG_KERNEL_START=0xc0000000
+CONFIG_PHYSICAL_START=0x00000000
 CONFIG_TASK_SIZE=0xc0000000
 CONFIG_CONSISTENT_START=0xff100000
 CONFIG_CONSISTENT_SIZE=0x00200000
-CONFIG_BOOT_LOAD=0x00400000
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -290,8 +305,6 @@ CONFIG_TCP_CONG_CUBIC=y
 CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
 # CONFIG_NETWORK_SECMARK is not set
 # CONFIG_NETFILTER is not set
 # CONFIG_IP_DCCP is not set
@@ -341,6 +354,8 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_DEBUG_DRIVER is not set
 # CONFIG_DEBUG_DEVRES is not set
 # CONFIG_SYS_HYPERVISOR is not set
@@ -353,6 +368,7 @@ CONFIG_MTD_PARTITIONS=y
 # CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
 CONFIG_MTD_OF_PARTS=y
+# CONFIG_MTD_AR7_PARTS is not set
 
 #
 # User Modules And Translation Layers
@@ -443,12 +459,14 @@ CONFIG_BLK_DEV_RAM_SIZE=35000
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
 # CONFIG_XILINX_SYSACE is not set
+# CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_PHANTOM is not set
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_HP_ILO is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -466,12 +484,15 @@ CONFIG_HAVE_IDE=y
 #
 # IEEE 1394 (FireWire) support
 #
+
+#
+# Enable only one of the two stacks, unless you know what you are doing
+#
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -506,7 +527,6 @@ CONFIG_NETDEV_1000=y
 # CONFIG_DL2K is not set
 # CONFIG_E1000 is not set
 # CONFIG_E1000E is not set
-# CONFIG_E1000E_ENABLED is not set
 # CONFIG_IP1000 is not set
 # CONFIG_IGB is not set
 # CONFIG_NS83820 is not set
@@ -516,12 +536,12 @@ CONFIG_NETDEV_1000=y
 # CONFIG_SIS190 is not set
 # CONFIG_SKGE is not set
 # CONFIG_SKY2 is not set
-# CONFIG_SK98LIN is not set
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
+# CONFIG_ATL1E is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
 # CONFIG_CHELSIO_T3 is not set
@@ -534,6 +554,7 @@ CONFIG_NETDEV_10000=y
 # CONFIG_MLX4_CORE is not set
 # CONFIG_TEHUTI is not set
 # CONFIG_BNX2X is not set
+# CONFIG_SFC is not set
 # CONFIG_TR is not set
 
 #
@@ -541,6 +562,7 @@ CONFIG_NETDEV_10000=y
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
 # CONFIG_WAN is not set
 # CONFIG_FDDI is not set
 # CONFIG_HIPPI is not set
@@ -567,6 +589,7 @@ CONFIG_NETDEV_10000=y
 # Character devices
 #
 # CONFIG_VT is not set
+CONFIG_DEVKMEM=y
 # CONFIG_SERIAL_NONSTANDARD is not set
 # CONFIG_NOZOMI is not set
 
@@ -605,12 +628,9 @@ CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_TCG_TPM is not set
 CONFIG_DEVPORT=y
 # CONFIG_I2C is not set
-
-#
-# SPI support
-#
 # CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+# CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
@@ -626,13 +646,24 @@ CONFIG_SSB_POSSIBLE=y
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
 
 #
 # Multimedia devices
 #
+
+#
+# Multimedia core support
+#
 # CONFIG_VIDEO_DEV is not set
 # CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
 # CONFIG_DAB is not set
 
 #
@@ -649,16 +680,14 @@ CONFIG_VIDEO_OUTPUT_CONTROL=m
 # Display device support
 #
 # CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Sound
-#
 # CONFIG_SOUND is not set
 CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
 CONFIG_USB_ARCH_HAS_EHCI=y
 # CONFIG_USB is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
 
 #
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
@@ -667,13 +696,11 @@ CONFIG_USB_ARCH_HAS_EHCI=y
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
 # CONFIG_INFINIBAND is not set
 # CONFIG_EDAC is not set
 # CONFIG_RTC_CLASS is not set
-
-#
-# Userspace I/O
-#
+# CONFIG_DMADEVICES is not set
 # CONFIG_UIO is not set
 
 #
@@ -688,7 +715,6 @@ CONFIG_EXT2_FS=y
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
 # CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
@@ -737,6 +763,7 @@ CONFIG_TMPFS=y
 CONFIG_CRAMFS=y
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
 # CONFIG_ROMFS_FS is not set
@@ -747,14 +774,12 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 # CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -775,8 +800,10 @@ CONFIG_MSDOS_PARTITION=y
 # Library routines
 #
 CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
 # CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
@@ -786,6 +813,7 @@ CONFIG_PLIST=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
 
 #
 # Kernel hacking
@@ -793,6 +821,7 @@ CONFIG_HAS_DMA=y
 # CONFIG_PRINTK_TIME is not set
 CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
 # CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_FS=y
@@ -800,9 +829,12 @@ CONFIG_DEBUG_FS=y
 CONFIG_DEBUG_KERNEL=y
 # CONFIG_DEBUG_SHIRQ is not set
 CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
 CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
 # CONFIG_SLUB_DEBUG_ON is not set
 # CONFIG_SLUB_STATS is not set
 # CONFIG_DEBUG_RT_MUTEXES is not set
@@ -815,17 +847,30 @@ CONFIG_SCHED_DEBUG=y
 CONFIG_DEBUG_BUGVERBOSE=y
 # CONFIG_DEBUG_INFO is not set
 # CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+# CONFIG_FTRACE is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
 # CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
 # CONFIG_DEBUG_PAGEALLOC is not set
-# CONFIG_DEBUGGER is not set
+# CONFIG_CODE_PATCHING_SELFTEST is not set
+# CONFIG_FTR_FIXUP_SELFTEST is not set
+# CONFIG_XMON is not set
+# CONFIG_IRQSTACKS is not set
 # CONFIG_VIRQ_DEBUG is not set
 # CONFIG_BDI_SWITCH is not set
 # CONFIG_PPC_EARLY_DEBUG is not set
@@ -837,51 +882,85 @@ CONFIG_DEBUG_BUGVERBOSE=y
 # CONFIG_SECURITY is not set
 # CONFIG_SECURITY_FILE_CAPABILITIES is not set
 CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
 CONFIG_CRYPTO_ALGAPI=y
 CONFIG_CRYPTO_BLKCIPHER=y
-# CONFIG_CRYPTO_SEQIV is not set
 CONFIG_CRYPTO_MANAGER=y
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=y
+# CONFIG_CRYPTO_LRW is not set
+CONFIG_CRYPTO_PCBC=y
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
 # CONFIG_CRYPTO_HMAC is not set
 # CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_NULL is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
 # CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
 # CONFIG_CRYPTO_SHA1 is not set
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
 # CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-CONFIG_CRYPTO_ECB=y
-CONFIG_CRYPTO_CBC=y
-CONFIG_CRYPTO_PCBC=y
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_XTS is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
 # CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
 # CONFIG_CRYPTO_CAST5 is not set
 # CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
 # CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_SEED is not set
 # CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
 # CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_TEST is not set
-# CONFIG_CRYPTO_AUTHENC is not set
 # CONFIG_CRYPTO_LZO is not set
 CONFIG_CRYPTO_HW=y
 # CONFIG_CRYPTO_DEV_HIFN_795X is not set
 # CONFIG_PPC_CLOCK is not set
+# CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/44x/bamboo_defconfig b/arch/powerpc/configs/44x/bamboo_defconfig
index c44db554cdc6..e920693535af 100644
--- a/arch/powerpc/configs/44x/bamboo_defconfig
+++ b/arch/powerpc/configs/44x/bamboo_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.25-rc2
-# Fri Feb 15 21:36:39 2008
+# Linux kernel version: 2.6.27-rc1
+# Tue Aug  5 08:43:44 2008
 #
 # CONFIG_PPC64 is not set
 
@@ -30,8 +30,12 @@ CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_TIME_VSYSCALL=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
+# CONFIG_HAVE_GET_USER_PAGES_FAST is not set
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
 CONFIG_GENERIC_HWEIGHT=y
@@ -79,6 +83,7 @@ CONFIG_FAIR_GROUP_SCHED=y
 CONFIG_USER_SCHED=y
 # CONFIG_CGROUP_SCHED is not set
 CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_RELAY is not set
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
@@ -87,6 +92,7 @@ CONFIG_INITRAMFS_SOURCE=""
 CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
@@ -112,13 +118,22 @@ CONFIG_SLUB=y
 # CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
+CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
+# CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+# CONFIG_HAVE_CLK is not set
 CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
@@ -129,6 +144,7 @@ CONFIG_LBD=y
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -143,24 +159,25 @@ CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
 CONFIG_CLASSIC_RCU=y
-# CONFIG_PREEMPT_RCU is not set
 # CONFIG_PPC4xx_PCI_EXPRESS is not set
 
 #
 # Platform support
 #
-# CONFIG_PPC_MPC512x is not set
-# CONFIG_PPC_MPC5121 is not set
 # CONFIG_PPC_CELL is not set
 # CONFIG_PPC_CELL_NATIVE is not set
 # CONFIG_PQ2ADS is not set
 CONFIG_BAMBOO=y
 # CONFIG_EBONY is not set
+# CONFIG_SAM440EP is not set
 # CONFIG_SEQUOIA is not set
 # CONFIG_TAISHAN is not set
 # CONFIG_KATMAI is not set
 # CONFIG_RAINIER is not set
 # CONFIG_WARP is not set
+# CONFIG_CANYONLANDS is not set
+# CONFIG_YOSEMITE is not set
+# CONFIG_XILINX_VIRTEX440_GENERIC_BOARD is not set
 CONFIG_440EP=y
 CONFIG_IBM440EP_ERR42=y
 # CONFIG_IPIC is not set
@@ -193,7 +210,6 @@ CONFIG_HZ=250
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
-CONFIG_RCU_TRACE=y
 CONFIG_BINFMT_ELF=y
 # CONFIG_BINFMT_MISC is not set
 # CONFIG_MATH_EMULATION is not set
@@ -211,14 +227,18 @@ CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
 # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_MIGRATION=y
 CONFIG_RESOURCES_64BIT=y
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
+CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 CONFIG_CMDLINE_BOOL=y
 CONFIG_CMDLINE=""
+CONFIG_EXTRA_TARGETS=""
 CONFIG_SECCOMP=y
 CONFIG_ISA_DMA_API=y
 
@@ -227,6 +247,8 @@ CONFIG_ISA_DMA_API=y
 #
 CONFIG_ZONE_DMA=y
 CONFIG_PPC_INDIRECT_PCI=y
+CONFIG_4xx_SOC=y
+CONFIG_PPC_PCI_CHOICE=y
 CONFIG_PCI=y
 CONFIG_PCI_DOMAINS=y
 CONFIG_PCI_SYSCALL=y
@@ -237,6 +259,7 @@ CONFIG_PCI_LEGACY=y
 # CONFIG_PCI_DEBUG is not set
 # CONFIG_PCCARD is not set
 # CONFIG_HOTPLUG_PCI is not set
+# CONFIG_HAS_RAPIDIO is not set
 
 #
 # Advanced setup
@@ -246,17 +269,13 @@ CONFIG_PCI_LEGACY=y
 #
 # Default settings for advanced configuration options are used
 #
-CONFIG_HIGHMEM_START=0xfe000000
 CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_PAGE_OFFSET=0xc0000000
 CONFIG_KERNEL_START=0xc0000000
+CONFIG_PHYSICAL_START=0x00000000
 CONFIG_TASK_SIZE=0xc0000000
 CONFIG_CONSISTENT_START=0xff100000
 CONFIG_CONSISTENT_SIZE=0x00200000
-CONFIG_BOOT_LOAD=0x01000000
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -294,8 +313,6 @@ CONFIG_TCP_CONG_CUBIC=y
 CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
 # CONFIG_NETWORK_SECMARK is not set
 # CONFIG_NETFILTER is not set
 # CONFIG_IP_DCCP is not set
@@ -345,6 +362,8 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_DEBUG_DRIVER is not set
 # CONFIG_DEBUG_DEVRES is not set
 # CONFIG_SYS_HYPERVISOR is not set
@@ -370,12 +389,14 @@ CONFIG_BLK_DEV_RAM_SIZE=35000
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
 # CONFIG_XILINX_SYSACE is not set
+# CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_PHANTOM is not set
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_HP_ILO is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -393,12 +414,15 @@ CONFIG_HAVE_IDE=y
 #
 # IEEE 1394 (FireWire) support
 #
+
+#
+# Enable only one of the two stacks, unless you know what you are doing
+#
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -433,7 +457,6 @@ CONFIG_NETDEV_1000=y
 # CONFIG_DL2K is not set
 # CONFIG_E1000 is not set
 # CONFIG_E1000E is not set
-# CONFIG_E1000E_ENABLED is not set
 # CONFIG_IP1000 is not set
 # CONFIG_IGB is not set
 # CONFIG_NS83820 is not set
@@ -443,12 +466,12 @@ CONFIG_NETDEV_1000=y
 # CONFIG_SIS190 is not set
 # CONFIG_SKGE is not set
 # CONFIG_SKY2 is not set
-# CONFIG_SK98LIN is not set
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
+# CONFIG_ATL1E is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
 # CONFIG_CHELSIO_T3 is not set
@@ -461,6 +484,7 @@ CONFIG_NETDEV_10000=y
 # CONFIG_MLX4_CORE is not set
 # CONFIG_TEHUTI is not set
 # CONFIG_BNX2X is not set
+# CONFIG_SFC is not set
 # CONFIG_TR is not set
 
 #
@@ -468,6 +492,7 @@ CONFIG_NETDEV_10000=y
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
 # CONFIG_WAN is not set
 # CONFIG_FDDI is not set
 # CONFIG_HIPPI is not set
@@ -494,6 +519,7 @@ CONFIG_NETDEV_10000=y
 # Character devices
 #
 # CONFIG_VT is not set
+CONFIG_DEVKMEM=y
 # CONFIG_SERIAL_NONSTANDARD is not set
 # CONFIG_NOZOMI is not set
 
@@ -532,12 +558,9 @@ CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_TCG_TPM is not set
 CONFIG_DEVPORT=y
 # CONFIG_I2C is not set
-
-#
-# SPI support
-#
 # CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+# CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
@@ -553,13 +576,24 @@ CONFIG_SSB_POSSIBLE=y
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
 
 #
 # Multimedia devices
 #
+
+#
+# Multimedia core support
+#
 # CONFIG_VIDEO_DEV is not set
 # CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
 CONFIG_DAB=y
 
 #
@@ -576,16 +610,14 @@ CONFIG_VIDEO_OUTPUT_CONTROL=m
 # Display device support
 #
 # CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Sound
-#
 # CONFIG_SOUND is not set
 CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
 CONFIG_USB_ARCH_HAS_EHCI=y
 # CONFIG_USB is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
 
 #
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
@@ -594,13 +626,11 @@ CONFIG_USB_ARCH_HAS_EHCI=y
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
 # CONFIG_INFINIBAND is not set
 # CONFIG_EDAC is not set
 # CONFIG_RTC_CLASS is not set
-
-#
-# Userspace I/O
-#
+# CONFIG_DMADEVICES is not set
 # CONFIG_UIO is not set
 
 #
@@ -615,7 +645,6 @@ CONFIG_EXT2_FS=y
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
 # CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
@@ -663,6 +692,7 @@ CONFIG_TMPFS=y
 CONFIG_CRAMFS=y
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
 # CONFIG_ROMFS_FS is not set
@@ -673,14 +703,12 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 # CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -701,8 +729,10 @@ CONFIG_MSDOS_PARTITION=y
 # Library routines
 #
 CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
 # CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
@@ -712,6 +742,7 @@ CONFIG_PLIST=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
 
 #
 # Kernel hacking
@@ -719,6 +750,7 @@ CONFIG_HAS_DMA=y
 # CONFIG_PRINTK_TIME is not set
 CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
 # CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_FS=y
@@ -726,9 +758,12 @@ CONFIG_DEBUG_FS=y
 CONFIG_DEBUG_KERNEL=y
 # CONFIG_DEBUG_SHIRQ is not set
 CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
 CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
 # CONFIG_SLUB_DEBUG_ON is not set
 # CONFIG_SLUB_STATS is not set
 # CONFIG_DEBUG_RT_MUTEXES is not set
@@ -741,19 +776,30 @@ CONFIG_SCHED_DEBUG=y
 # CONFIG_DEBUG_BUGVERBOSE is not set
 # CONFIG_DEBUG_INFO is not set
 # CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+# CONFIG_FTRACE is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
 # CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
 # CONFIG_DEBUG_PAGEALLOC is not set
-CONFIG_DEBUGGER=y
-# CONFIG_KGDB is not set
+# CONFIG_CODE_PATCHING_SELFTEST is not set
+# CONFIG_FTR_FIXUP_SELFTEST is not set
 # CONFIG_XMON is not set
+# CONFIG_IRQSTACKS is not set
 # CONFIG_VIRQ_DEBUG is not set
 # CONFIG_BDI_SWITCH is not set
 # CONFIG_PPC_EARLY_DEBUG is not set
@@ -765,51 +811,85 @@ CONFIG_DEBUGGER=y
 # CONFIG_SECURITY is not set
 # CONFIG_SECURITY_FILE_CAPABILITIES is not set
 CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
 CONFIG_CRYPTO_ALGAPI=y
 CONFIG_CRYPTO_BLKCIPHER=y
-# CONFIG_CRYPTO_SEQIV is not set
 CONFIG_CRYPTO_MANAGER=y
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=y
+# CONFIG_CRYPTO_LRW is not set
+CONFIG_CRYPTO_PCBC=y
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
 # CONFIG_CRYPTO_HMAC is not set
 # CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_NULL is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
 # CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
 # CONFIG_CRYPTO_SHA1 is not set
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
 # CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-CONFIG_CRYPTO_ECB=y
-CONFIG_CRYPTO_CBC=y
-CONFIG_CRYPTO_PCBC=y
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_XTS is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
 # CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
 # CONFIG_CRYPTO_CAST5 is not set
 # CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
 # CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_SEED is not set
 # CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
 # CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_TEST is not set
-# CONFIG_CRYPTO_AUTHENC is not set
 # CONFIG_CRYPTO_LZO is not set
 CONFIG_CRYPTO_HW=y
 # CONFIG_CRYPTO_DEV_HIFN_795X is not set
 # CONFIG_PPC_CLOCK is not set
+# CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/44x/canyonlands_defconfig b/arch/powerpc/configs/44x/canyonlands_defconfig
index a3b763c45ec6..74da5c7754a4 100644
--- a/arch/powerpc/configs/44x/canyonlands_defconfig
+++ b/arch/powerpc/configs/44x/canyonlands_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.25-rc1
-# Thu Feb 21 14:29:28 2008
+# Linux kernel version: 2.6.27-rc1
+# Tue Aug  5 08:46:14 2008
 #
 # CONFIG_PPC64 is not set
 
@@ -30,8 +30,12 @@ CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_TIME_VSYSCALL=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
+# CONFIG_HAVE_GET_USER_PAGES_FAST is not set
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
 CONFIG_GENERIC_HWEIGHT=y
@@ -73,8 +77,9 @@ CONFIG_POSIX_MQUEUE=y
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_CGROUPS is not set
-# CONFIG_FAIR_GROUP_SCHED is not set
+# CONFIG_GROUP_SCHED is not set
 CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_RELAY is not set
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
@@ -83,12 +88,12 @@ CONFIG_INITRAMFS_SOURCE=""
 CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
-# CONFIG_LOGBUFFER is not set
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
 CONFIG_COMPAT_BRK=y
@@ -109,13 +114,22 @@ CONFIG_SLUB=y
 # CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
+CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
+# CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+# CONFIG_HAVE_CLK is not set
 CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
@@ -126,6 +140,7 @@ CONFIG_LBD=y
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -140,25 +155,25 @@ CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
 CONFIG_CLASSIC_RCU=y
-# CONFIG_PREEMPT_RCU is not set
 CONFIG_PPC4xx_PCI_EXPRESS=y
 
 #
 # Platform support
 #
-# CONFIG_PPC_MPC512x is not set
-# CONFIG_PPC_MPC5121 is not set
 # CONFIG_PPC_CELL is not set
 # CONFIG_PPC_CELL_NATIVE is not set
 # CONFIG_PQ2ADS is not set
 # CONFIG_BAMBOO is not set
 # CONFIG_EBONY is not set
+# CONFIG_SAM440EP is not set
 # CONFIG_SEQUOIA is not set
 # CONFIG_TAISHAN is not set
 # CONFIG_KATMAI is not set
 # CONFIG_RAINIER is not set
 # CONFIG_WARP is not set
 CONFIG_CANYONLANDS=y
+# CONFIG_YOSEMITE is not set
+# CONFIG_XILINX_VIRTEX440_GENERIC_BOARD is not set
 CONFIG_460EX=y
 # CONFIG_IPIC is not set
 # CONFIG_MPIC is not set
@@ -190,7 +205,6 @@ CONFIG_HZ=250
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
-CONFIG_RCU_TRACE=y
 CONFIG_BINFMT_ELF=y
 # CONFIG_BINFMT_MISC is not set
 # CONFIG_MATH_EMULATION is not set
@@ -208,16 +222,19 @@ CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
 # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_MIGRATION=y
 CONFIG_RESOURCES_64BIT=y
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
+CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 CONFIG_CMDLINE_BOOL=y
 CONFIG_CMDLINE=""
+CONFIG_EXTRA_TARGETS=""
 CONFIG_SECCOMP=y
-CONFIG_WANT_DEVICE_TREE=y
 CONFIG_ISA_DMA_API=y
 
 #
@@ -225,6 +242,8 @@ CONFIG_ISA_DMA_API=y
 #
 CONFIG_ZONE_DMA=y
 CONFIG_PPC_INDIRECT_PCI=y
+CONFIG_4xx_SOC=y
+CONFIG_PPC_PCI_CHOICE=y
 CONFIG_PCI=y
 CONFIG_PCI_DOMAINS=y
 CONFIG_PCI_SYSCALL=y
@@ -235,6 +254,7 @@ CONFIG_PCI_LEGACY=y
 # CONFIG_PCI_DEBUG is not set
 # CONFIG_PCCARD is not set
 # CONFIG_HOTPLUG_PCI is not set
+# CONFIG_HAS_RAPIDIO is not set
 
 #
 # Advanced setup
@@ -244,17 +264,13 @@ CONFIG_PCI_LEGACY=y
 #
 # Default settings for advanced configuration options are used
 #
-CONFIG_HIGHMEM_START=0xfe000000
 CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_PAGE_OFFSET=0xc0000000
 CONFIG_KERNEL_START=0xc0000000
+CONFIG_PHYSICAL_START=0x00000000
 CONFIG_TASK_SIZE=0xc0000000
 CONFIG_CONSISTENT_START=0xff100000
 CONFIG_CONSISTENT_SIZE=0x00200000
-CONFIG_BOOT_LOAD=0x01000000
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -292,8 +308,6 @@ CONFIG_TCP_CONG_CUBIC=y
 CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
 # CONFIG_NETWORK_SECMARK is not set
 # CONFIG_NETFILTER is not set
 # CONFIG_IP_DCCP is not set
@@ -343,6 +357,8 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_DEBUG_DRIVER is not set
 # CONFIG_DEBUG_DEVRES is not set
 # CONFIG_SYS_HYPERVISOR is not set
@@ -368,6 +384,7 @@ CONFIG_BLK_DEV_RAM_SIZE=35000
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
 # CONFIG_XILINX_SYSACE is not set
+# CONFIG_BLK_DEV_HD is not set
 # CONFIG_MISC_DEVICES is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
@@ -386,12 +403,15 @@ CONFIG_HAVE_IDE=y
 #
 # IEEE 1394 (FireWire) support
 #
+
+#
+# Enable only one of the two stacks, unless you know what you are doing
+#
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -430,6 +450,7 @@ CONFIG_IBM_NEW_EMAC_EMAC4=y
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
 # CONFIG_WAN is not set
 # CONFIG_FDDI is not set
 # CONFIG_HIPPI is not set
@@ -456,6 +477,7 @@ CONFIG_IBM_NEW_EMAC_EMAC4=y
 # Character devices
 #
 # CONFIG_VT is not set
+CONFIG_DEVKMEM=y
 # CONFIG_SERIAL_NONSTANDARD is not set
 # CONFIG_NOZOMI is not set
 
@@ -494,16 +516,14 @@ CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_TCG_TPM is not set
 CONFIG_DEVPORT=y
 # CONFIG_I2C is not set
-
-#
-# SPI support
-#
 # CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+# CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 # CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
 
 #
@@ -515,13 +535,24 @@ CONFIG_SSB_POSSIBLE=y
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
 
 #
 # Multimedia devices
 #
+
+#
+# Multimedia core support
+#
 # CONFIG_VIDEO_DEV is not set
 # CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
 CONFIG_DAB=y
 
 #
@@ -538,22 +569,16 @@ CONFIG_VIDEO_OUTPUT_CONTROL=m
 # Display device support
 #
 # CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Sound
-#
 # CONFIG_SOUND is not set
 # CONFIG_USB_SUPPORT is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
 # CONFIG_INFINIBAND is not set
 # CONFIG_EDAC is not set
 # CONFIG_RTC_CLASS is not set
-
-#
-# Userspace I/O
-#
+# CONFIG_DMADEVICES is not set
 # CONFIG_UIO is not set
 
 #
@@ -568,7 +593,6 @@ CONFIG_EXT2_FS=y
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
 # CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
@@ -616,6 +640,7 @@ CONFIG_TMPFS=y
 CONFIG_CRAMFS=y
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
 # CONFIG_ROMFS_FS is not set
@@ -626,14 +651,12 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 # CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -654,8 +677,10 @@ CONFIG_MSDOS_PARTITION=y
 # Library routines
 #
 CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
 # CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
@@ -665,6 +690,7 @@ CONFIG_PLIST=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
 
 #
 # Kernel hacking
@@ -672,6 +698,7 @@ CONFIG_HAS_DMA=y
 # CONFIG_PRINTK_TIME is not set
 CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
 # CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_FS=y
@@ -679,9 +706,12 @@ CONFIG_DEBUG_FS=y
 CONFIG_DEBUG_KERNEL=y
 # CONFIG_DEBUG_SHIRQ is not set
 CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
 CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
 # CONFIG_SLUB_DEBUG_ON is not set
 # CONFIG_SLUB_STATS is not set
 # CONFIG_DEBUG_RT_MUTEXES is not set
@@ -694,19 +724,30 @@ CONFIG_SCHED_DEBUG=y
 # CONFIG_DEBUG_BUGVERBOSE is not set
 # CONFIG_DEBUG_INFO is not set
 # CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+# CONFIG_FTRACE is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
 # CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
 # CONFIG_DEBUG_PAGEALLOC is not set
-CONFIG_DEBUGGER=y
-# CONFIG_KGDB is not set
+# CONFIG_CODE_PATCHING_SELFTEST is not set
+# CONFIG_FTR_FIXUP_SELFTEST is not set
 # CONFIG_XMON is not set
+# CONFIG_IRQSTACKS is not set
 # CONFIG_VIRQ_DEBUG is not set
 # CONFIG_BDI_SWITCH is not set
 # CONFIG_PPC_EARLY_DEBUG is not set
@@ -719,3 +760,4 @@ CONFIG_DEBUGGER=y
 # CONFIG_SECURITY_FILE_CAPABILITIES is not set
 # CONFIG_CRYPTO is not set
 # CONFIG_PPC_CLOCK is not set
+# CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/44x/ebony_defconfig b/arch/powerpc/configs/44x/ebony_defconfig
index 07c8d4ce175a..17615750b494 100644
--- a/arch/powerpc/configs/44x/ebony_defconfig
+++ b/arch/powerpc/configs/44x/ebony_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.25-rc2
-# Fri Feb 15 21:50:44 2008
+# Linux kernel version: 2.6.27-rc1
+# Tue Aug  5 09:04:12 2008
 #
 # CONFIG_PPC64 is not set
 
@@ -29,8 +29,12 @@ CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_TIME_VSYSCALL=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
+# CONFIG_HAVE_GET_USER_PAGES_FAST is not set
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
 CONFIG_GENERIC_HWEIGHT=y
@@ -78,6 +82,7 @@ CONFIG_FAIR_GROUP_SCHED=y
 CONFIG_USER_SCHED=y
 # CONFIG_CGROUP_SCHED is not set
 CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_RELAY is not set
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
@@ -86,6 +91,7 @@ CONFIG_INITRAMFS_SOURCE=""
 CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
 CONFIG_KALLSYMS_EXTRA_PASS=y
@@ -111,13 +117,22 @@ CONFIG_SLUB=y
 # CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
+CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
+# CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+# CONFIG_HAVE_CLK is not set
 CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
@@ -128,6 +143,7 @@ CONFIG_LBD=y
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -142,24 +158,25 @@ CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
 CONFIG_CLASSIC_RCU=y
-# CONFIG_PREEMPT_RCU is not set
 # CONFIG_PPC4xx_PCI_EXPRESS is not set
 
 #
 # Platform support
 #
-# CONFIG_PPC_MPC512x is not set
-# CONFIG_PPC_MPC5121 is not set
 # CONFIG_PPC_CELL is not set
 # CONFIG_PPC_CELL_NATIVE is not set
 # CONFIG_PQ2ADS is not set
 # CONFIG_BAMBOO is not set
 CONFIG_EBONY=y
+# CONFIG_SAM440EP is not set
 # CONFIG_SEQUOIA is not set
 # CONFIG_TAISHAN is not set
 # CONFIG_KATMAI is not set
 # CONFIG_RAINIER is not set
 # CONFIG_WARP is not set
+# CONFIG_CANYONLANDS is not set
+# CONFIG_YOSEMITE is not set
+# CONFIG_XILINX_VIRTEX440_GENERIC_BOARD is not set
 CONFIG_440GP=y
 # CONFIG_IPIC is not set
 # CONFIG_MPIC is not set
@@ -192,7 +209,6 @@ CONFIG_HZ=250
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
-CONFIG_RCU_TRACE=y
 CONFIG_BINFMT_ELF=y
 # CONFIG_BINFMT_MISC is not set
 CONFIG_MATH_EMULATION=y
@@ -210,13 +226,17 @@ CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
 # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_MIGRATION=y
 CONFIG_RESOURCES_64BIT=y
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
+CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
+CONFIG_EXTRA_TARGETS=""
 CONFIG_SECCOMP=y
 CONFIG_ISA_DMA_API=y
 
@@ -225,6 +245,8 @@ CONFIG_ISA_DMA_API=y
 #
 CONFIG_ZONE_DMA=y
 CONFIG_PPC_INDIRECT_PCI=y
+CONFIG_4xx_SOC=y
+CONFIG_PPC_PCI_CHOICE=y
 CONFIG_PCI=y
 CONFIG_PCI_DOMAINS=y
 CONFIG_PCI_SYSCALL=y
@@ -235,6 +257,7 @@ CONFIG_PCI_LEGACY=y
 # CONFIG_PCI_DEBUG is not set
 # CONFIG_PCCARD is not set
 # CONFIG_HOTPLUG_PCI is not set
+# CONFIG_HAS_RAPIDIO is not set
 
 #
 # Advanced setup
@@ -244,17 +267,13 @@ CONFIG_PCI_LEGACY=y
 #
 # Default settings for advanced configuration options are used
 #
-CONFIG_HIGHMEM_START=0xfe000000
 CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_PAGE_OFFSET=0xc0000000
 CONFIG_KERNEL_START=0xc0000000
+CONFIG_PHYSICAL_START=0x00000000
 CONFIG_TASK_SIZE=0xc0000000
 CONFIG_CONSISTENT_START=0xff100000
 CONFIG_CONSISTENT_SIZE=0x00200000
-CONFIG_BOOT_LOAD=0x01000000
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -292,8 +311,6 @@ CONFIG_TCP_CONG_CUBIC=y
 CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
 # CONFIG_NETWORK_SECMARK is not set
 # CONFIG_NETFILTER is not set
 # CONFIG_IP_DCCP is not set
@@ -343,6 +360,8 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_DEBUG_DRIVER is not set
 # CONFIG_DEBUG_DEVRES is not set
 # CONFIG_SYS_HYPERVISOR is not set
@@ -355,6 +374,7 @@ CONFIG_MTD_PARTITIONS=y
 # CONFIG_MTD_REDBOOT_PARTS is not set
 # CONFIG_MTD_CMDLINE_PARTS is not set
 CONFIG_MTD_OF_PARTS=y
+# CONFIG_MTD_AR7_PARTS is not set
 
 #
 # User Modules And Translation Layers
@@ -444,12 +464,14 @@ CONFIG_BLK_DEV_RAM_SIZE=35000
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
 # CONFIG_XILINX_SYSACE is not set
+# CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_PHANTOM is not set
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_HP_ILO is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -467,12 +489,15 @@ CONFIG_HAVE_IDE=y
 #
 # IEEE 1394 (FireWire) support
 #
+
+#
+# Enable only one of the two stacks, unless you know what you are doing
+#
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -507,7 +532,6 @@ CONFIG_NETDEV_1000=y
 # CONFIG_DL2K is not set
 # CONFIG_E1000 is not set
 # CONFIG_E1000E is not set
-# CONFIG_E1000E_ENABLED is not set
 # CONFIG_IP1000 is not set
 # CONFIG_IGB is not set
 # CONFIG_NS83820 is not set
@@ -517,12 +541,12 @@ CONFIG_NETDEV_1000=y
 # CONFIG_SIS190 is not set
 # CONFIG_SKGE is not set
 # CONFIG_SKY2 is not set
-# CONFIG_SK98LIN is not set
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
+# CONFIG_ATL1E is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
 # CONFIG_CHELSIO_T3 is not set
@@ -535,6 +559,7 @@ CONFIG_NETDEV_10000=y
 # CONFIG_MLX4_CORE is not set
 # CONFIG_TEHUTI is not set
 # CONFIG_BNX2X is not set
+# CONFIG_SFC is not set
 # CONFIG_TR is not set
 
 #
@@ -542,6 +567,7 @@ CONFIG_NETDEV_10000=y
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
 # CONFIG_WAN is not set
 # CONFIG_FDDI is not set
 # CONFIG_HIPPI is not set
@@ -568,6 +594,7 @@ CONFIG_NETDEV_10000=y
 # Character devices
 #
 # CONFIG_VT is not set
+CONFIG_DEVKMEM=y
 # CONFIG_SERIAL_NONSTANDARD is not set
 # CONFIG_NOZOMI is not set
 
@@ -606,12 +633,9 @@ CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_TCG_TPM is not set
 CONFIG_DEVPORT=y
 # CONFIG_I2C is not set
-
-#
-# SPI support
-#
 # CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+# CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
@@ -627,13 +651,24 @@ CONFIG_SSB_POSSIBLE=y
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
 
 #
 # Multimedia devices
 #
+
+#
+# Multimedia core support
+#
 # CONFIG_VIDEO_DEV is not set
 # CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
 # CONFIG_DAB is not set
 
 #
@@ -650,16 +685,14 @@ CONFIG_SSB_POSSIBLE=y
 # Display device support
 #
 # CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Sound
-#
 # CONFIG_SOUND is not set
 CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
 CONFIG_USB_ARCH_HAS_EHCI=y
 # CONFIG_USB is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
 
 #
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
@@ -668,13 +701,11 @@ CONFIG_USB_ARCH_HAS_EHCI=y
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
 # CONFIG_INFINIBAND is not set
 # CONFIG_EDAC is not set
 # CONFIG_RTC_CLASS is not set
-
-#
-# Userspace I/O
-#
+# CONFIG_DMADEVICES is not set
 # CONFIG_UIO is not set
 
 #
@@ -689,7 +720,6 @@ CONFIG_EXT2_FS=y
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
 # CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
@@ -748,6 +778,7 @@ CONFIG_JFFS2_RTIME=y
 CONFIG_CRAMFS=y
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
 # CONFIG_ROMFS_FS is not set
@@ -758,14 +789,12 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 # CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -786,8 +815,10 @@ CONFIG_MSDOS_PARTITION=y
 # Library routines
 #
 CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
 # CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
@@ -798,6 +829,7 @@ CONFIG_PLIST=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
 
 #
 # Kernel hacking
@@ -805,6 +837,7 @@ CONFIG_HAS_DMA=y
 # CONFIG_PRINTK_TIME is not set
 CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
 # CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_FS=y
@@ -812,9 +845,12 @@ CONFIG_DEBUG_FS=y
 CONFIG_DEBUG_KERNEL=y
 # CONFIG_DEBUG_SHIRQ is not set
 CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
 CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
 # CONFIG_SLUB_DEBUG_ON is not set
 # CONFIG_SLUB_STATS is not set
 # CONFIG_DEBUG_RT_MUTEXES is not set
@@ -827,17 +863,30 @@ CONFIG_SCHED_DEBUG=y
 CONFIG_DEBUG_BUGVERBOSE=y
 # CONFIG_DEBUG_INFO is not set
 # CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+# CONFIG_FTRACE is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
 # CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
 # CONFIG_DEBUG_PAGEALLOC is not set
-# CONFIG_DEBUGGER is not set
+# CONFIG_CODE_PATCHING_SELFTEST is not set
+# CONFIG_FTR_FIXUP_SELFTEST is not set
+# CONFIG_XMON is not set
+# CONFIG_IRQSTACKS is not set
 # CONFIG_VIRQ_DEBUG is not set
 # CONFIG_BDI_SWITCH is not set
 # CONFIG_PPC_EARLY_DEBUG is not set
@@ -849,50 +898,84 @@ CONFIG_DEBUG_BUGVERBOSE=y
 # CONFIG_SECURITY is not set
 # CONFIG_SECURITY_FILE_CAPABILITIES is not set
 CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
 CONFIG_CRYPTO_ALGAPI=y
 CONFIG_CRYPTO_BLKCIPHER=y
-# CONFIG_CRYPTO_SEQIV is not set
 CONFIG_CRYPTO_MANAGER=y
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=y
+# CONFIG_CRYPTO_LRW is not set
+CONFIG_CRYPTO_PCBC=y
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
 # CONFIG_CRYPTO_HMAC is not set
 # CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_NULL is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
 # CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
 # CONFIG_CRYPTO_SHA1 is not set
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
 # CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-CONFIG_CRYPTO_ECB=y
-CONFIG_CRYPTO_CBC=y
-CONFIG_CRYPTO_PCBC=y
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_XTS is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
 # CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
 # CONFIG_CRYPTO_CAST5 is not set
 # CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
 # CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_SEED is not set
 # CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
 # CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_TEST is not set
-# CONFIG_CRYPTO_AUTHENC is not set
 # CONFIG_CRYPTO_LZO is not set
 # CONFIG_CRYPTO_HW is not set
 # CONFIG_PPC_CLOCK is not set
+# CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/44x/katmai_defconfig b/arch/powerpc/configs/44x/katmai_defconfig
index c8804ec01ea4..7bc4082a1c93 100644
--- a/arch/powerpc/configs/44x/katmai_defconfig
+++ b/arch/powerpc/configs/44x/katmai_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.24-rc6
-# Mon Dec 24 11:17:43 2007
+# Linux kernel version: 2.6.27-rc1
+# Tue Aug  5 09:06:51 2008
 #
 # CONFIG_PPC64 is not set
 
@@ -29,7 +29,12 @@ CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_TIME_VSYSCALL=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
+# CONFIG_HAVE_GET_USER_PAGES_FAST is not set
+# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
 CONFIG_GENERIC_HWEIGHT=y
@@ -67,23 +72,22 @@ CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_POSIX_MQUEUE=y
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
 # CONFIG_AUDIT is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_CGROUPS is not set
-CONFIG_FAIR_GROUP_SCHED=y
-CONFIG_FAIR_USER_SCHED=y
-# CONFIG_FAIR_CGROUP_SCHED is not set
+# CONFIG_GROUP_SCHED is not set
 CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
@@ -91,11 +95,13 @@ CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
 CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
 CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_VM_EVENT_COUNTERS=y
@@ -103,10 +109,26 @@ CONFIG_SLUB_DEBUG=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
+CONFIG_HAVE_IOREMAP_PROT=y
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
+# CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+# CONFIG_HAVE_CLK is not set
+CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
+CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
@@ -117,6 +139,7 @@ CONFIG_LBD=y
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -130,23 +153,28 @@ CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_CFQ is not set
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_CLASSIC_RCU=y
 CONFIG_PPC4xx_PCI_EXPRESS=y
 
 #
 # Platform support
 #
-# CONFIG_PPC_MPC52xx is not set
-# CONFIG_PPC_MPC5200 is not set
 # CONFIG_PPC_CELL is not set
 # CONFIG_PPC_CELL_NATIVE is not set
 # CONFIG_PQ2ADS is not set
 # CONFIG_BAMBOO is not set
 # CONFIG_EBONY is not set
+# CONFIG_SAM440EP is not set
 # CONFIG_SEQUOIA is not set
 # CONFIG_TAISHAN is not set
 CONFIG_KATMAI=y
 # CONFIG_RAINIER is not set
+# CONFIG_WARP is not set
+# CONFIG_CANYONLANDS is not set
+# CONFIG_YOSEMITE is not set
+# CONFIG_XILINX_VIRTEX440_GENERIC_BOARD is not set
 CONFIG_440SPe=y
+# CONFIG_IPIC is not set
 # CONFIG_MPIC is not set
 # CONFIG_MPIC_WEIRD is not set
 # CONFIG_PPC_I8259 is not set
@@ -157,7 +185,6 @@ CONFIG_440SPe=y
 # CONFIG_PPC_INDIRECT_IO is not set
 # CONFIG_GENERIC_IOMAP is not set
 # CONFIG_CPU_FREQ is not set
-# CONFIG_CPM2 is not set
 # CONFIG_FSL_ULI1575 is not set
 
 #
@@ -173,13 +200,17 @@ CONFIG_HZ_250=y
 # CONFIG_HZ_300 is not set
 # CONFIG_HZ_1000 is not set
 CONFIG_HZ=250
+# CONFIG_SCHED_HRTICK is not set
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
 CONFIG_BINFMT_ELF=y
 # CONFIG_BINFMT_MISC is not set
 # CONFIG_MATH_EMULATION is not set
+# CONFIG_IOMMU_HELPER is not set
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+CONFIG_ARCH_HAS_WALK_MEMORY=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
 CONFIG_ARCH_FLATMEM_ENABLE=y
 CONFIG_ARCH_POPULATES_NODE_MAP=y
 CONFIG_SELECT_MEMORY_MODEL=y
@@ -190,17 +221,19 @@ CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
 # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_MIGRATION=y
 CONFIG_RESOURCES_64BIT=y
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
+CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 CONFIG_CMDLINE_BOOL=y
 CONFIG_CMDLINE=""
+CONFIG_EXTRA_TARGETS=""
 CONFIG_SECCOMP=y
-CONFIG_WANT_DEVICE_TREE=y
-CONFIG_DEVICE_TREE="katmai.dts"
 CONFIG_ISA_DMA_API=y
 
 #
@@ -208,6 +241,8 @@ CONFIG_ISA_DMA_API=y
 #
 CONFIG_ZONE_DMA=y
 CONFIG_PPC_INDIRECT_PCI=y
+CONFIG_4xx_SOC=y
+CONFIG_PPC_PCI_CHOICE=y
 CONFIG_PCI=y
 CONFIG_PCI_DOMAINS=y
 CONFIG_PCI_SYSCALL=y
@@ -218,6 +253,7 @@ CONFIG_PCI_LEGACY=y
 # CONFIG_PCI_DEBUG is not set
 # CONFIG_PCCARD is not set
 # CONFIG_HOTPLUG_PCI is not set
+# CONFIG_HAS_RAPIDIO is not set
 
 #
 # Advanced setup
@@ -227,17 +263,13 @@ CONFIG_PCI_LEGACY=y
 #
 # Default settings for advanced configuration options are used
 #
-CONFIG_HIGHMEM_START=0xfe000000
 CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_PAGE_OFFSET=0xc0000000
 CONFIG_KERNEL_START=0xc0000000
+CONFIG_PHYSICAL_START=0x00000000
 CONFIG_TASK_SIZE=0xc0000000
 CONFIG_CONSISTENT_START=0xff100000
 CONFIG_CONSISTENT_SIZE=0x00200000
-CONFIG_BOOT_LOAD=0x01000000
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -275,8 +307,6 @@ CONFIG_TCP_CONG_CUBIC=y
 CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
 # CONFIG_NETWORK_SECMARK is not set
 # CONFIG_NETFILTER is not set
 # CONFIG_IP_DCCP is not set
@@ -300,6 +330,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 #
 # CONFIG_NET_PKTGEN is not set
 # CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
@@ -325,6 +356,8 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_DEBUG_DRIVER is not set
 # CONFIG_DEBUG_DEVRES is not set
 # CONFIG_SYS_HYPERVISOR is not set
@@ -346,15 +379,19 @@ CONFIG_BLK_DEV=y
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=35000
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
 # CONFIG_XILINX_SYSACE is not set
+# CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_PHANTOM is not set
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_HP_ILO is not set
+CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
 #
@@ -371,6 +408,10 @@ CONFIG_MISC_DEVICES=y
 #
 # IEEE 1394 (FireWire) support
 #
+
+#
+# Enable only one of the two stacks, unless you know what you are doing
+#
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
@@ -378,14 +419,12 @@ CONFIG_MACINTOSH_DRIVERS=y
 # CONFIG_MAC_EMUMOUSEBTN is not set
 # CONFIG_WINDFARM is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
 # CONFIG_EQUALIZER is not set
 # CONFIG_TUN is not set
 # CONFIG_VETH is not set
-# CONFIG_IP1000 is not set
 # CONFIG_ARCNET is not set
 # CONFIG_PHYLIB is not set
 CONFIG_NET_ETHERNET=y
@@ -414,6 +453,8 @@ CONFIG_NETDEV_1000=y
 # CONFIG_DL2K is not set
 # CONFIG_E1000 is not set
 # CONFIG_E1000E is not set
+# CONFIG_IP1000 is not set
+# CONFIG_IGB is not set
 # CONFIG_NS83820 is not set
 # CONFIG_HAMACHI is not set
 # CONFIG_YELLOWFIN is not set
@@ -421,12 +462,12 @@ CONFIG_NETDEV_1000=y
 # CONFIG_SIS190 is not set
 # CONFIG_SKGE is not set
 # CONFIG_SKY2 is not set
-# CONFIG_SK98LIN is not set
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
+# CONFIG_ATL1E is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
 # CONFIG_CHELSIO_T3 is not set
@@ -438,6 +479,8 @@ CONFIG_NETDEV_10000=y
 # CONFIG_NIU is not set
 # CONFIG_MLX4_CORE is not set
 # CONFIG_TEHUTI is not set
+# CONFIG_BNX2X is not set
+# CONFIG_SFC is not set
 # CONFIG_TR is not set
 
 #
@@ -445,12 +488,12 @@ CONFIG_NETDEV_10000=y
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
 # CONFIG_WAN is not set
 # CONFIG_FDDI is not set
 # CONFIG_HIPPI is not set
 # CONFIG_PPP is not set
 # CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
 # CONFIG_NETCONSOLE is not set
 # CONFIG_NETPOLL is not set
 # CONFIG_NET_POLL_CONTROLLER is not set
@@ -472,7 +515,9 @@ CONFIG_NETDEV_10000=y
 # Character devices
 #
 # CONFIG_VT is not set
+CONFIG_DEVKMEM=y
 # CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_NOZOMI is not set
 
 #
 # Serial drivers
@@ -509,15 +554,14 @@ CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_TCG_TPM is not set
 CONFIG_DEVPORT=y
 # CONFIG_I2C is not set
-
-#
-# SPI support
-#
 # CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+# CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
 
 #
@@ -529,13 +573,24 @@ CONFIG_SSB_POSSIBLE=y
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
 
 #
 # Multimedia devices
 #
+
+#
+# Multimedia core support
+#
 # CONFIG_VIDEO_DEV is not set
 # CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
 CONFIG_DAB=y
 
 #
@@ -552,34 +607,27 @@ CONFIG_VIDEO_OUTPUT_CONTROL=m
 # Display device support
 #
 # CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Sound
-#
 # CONFIG_SOUND is not set
 CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
 CONFIG_USB_ARCH_HAS_EHCI=y
 # CONFIG_USB is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
 
 #
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
 #
-
-#
-# USB Gadget Support
-#
 # CONFIG_USB_GADGET is not set
 # CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
 # CONFIG_INFINIBAND is not set
 # CONFIG_EDAC is not set
 # CONFIG_RTC_CLASS is not set
-
-#
-# Userspace I/O
-#
+# CONFIG_DMADEVICES is not set
 # CONFIG_UIO is not set
 
 #
@@ -594,14 +642,11 @@ CONFIG_EXT2_FS=y
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
 # CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
+CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
 # CONFIG_FUSE_FS is not set
@@ -643,8 +688,11 @@ CONFIG_TMPFS=y
 # CONFIG_EFS_FS is not set
 CONFIG_CRAMFS=y
 # CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
@@ -652,14 +700,12 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 # CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -675,14 +721,15 @@ CONFIG_SUNRPC=y
 CONFIG_MSDOS_PARTITION=y
 # CONFIG_NLS is not set
 # CONFIG_DLM is not set
-# CONFIG_UCC_SLOW is not set
 
 #
 # Library routines
 #
 CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
 # CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
@@ -692,10 +739,7 @@ CONFIG_PLIST=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
-CONFIG_INSTRUMENTATION=y
-# CONFIG_PROFILING is not set
-# CONFIG_KPROBES is not set
-# CONFIG_MARKERS is not set
+CONFIG_HAVE_LMB=y
 
 #
 # Kernel hacking
@@ -703,6 +747,7 @@ CONFIG_INSTRUMENTATION=y
 # CONFIG_PRINTK_TIME is not set
 CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
 # CONFIG_UNUSED_SYMBOLS is not set
 # CONFIG_DEBUG_FS is not set
@@ -710,10 +755,14 @@ CONFIG_MAGIC_SYSRQ=y
 CONFIG_DEBUG_KERNEL=y
 # CONFIG_DEBUG_SHIRQ is not set
 CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
 CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
 # CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
 # CONFIG_DEBUG_RT_MUTEXES is not set
 # CONFIG_RT_MUTEX_TESTER is not set
 # CONFIG_DEBUG_SPINLOCK is not set
@@ -724,19 +773,30 @@ CONFIG_SCHED_DEBUG=y
 # CONFIG_DEBUG_BUGVERBOSE is not set
 # CONFIG_DEBUG_INFO is not set
 # CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
-CONFIG_FORCED_INLINING=y
 # CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+# CONFIG_FTRACE is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
 # CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
 # CONFIG_DEBUG_PAGEALLOC is not set
-CONFIG_DEBUGGER=y
-# CONFIG_KGDB is not set
+# CONFIG_CODE_PATCHING_SELFTEST is not set
+# CONFIG_FTR_FIXUP_SELFTEST is not set
 # CONFIG_XMON is not set
+# CONFIG_IRQSTACKS is not set
 # CONFIG_BDI_SWITCH is not set
 # CONFIG_PPC_EARLY_DEBUG is not set
 
@@ -747,44 +807,85 @@ CONFIG_DEBUGGER=y
 # CONFIG_SECURITY is not set
 # CONFIG_SECURITY_FILE_CAPABILITIES is not set
 CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
 CONFIG_CRYPTO_ALGAPI=y
 CONFIG_CRYPTO_BLKCIPHER=y
 CONFIG_CRYPTO_MANAGER=y
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=y
+# CONFIG_CRYPTO_LRW is not set
+CONFIG_CRYPTO_PCBC=y
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
 # CONFIG_CRYPTO_HMAC is not set
 # CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_NULL is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
 # CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
 # CONFIG_CRYPTO_SHA1 is not set
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
 # CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-CONFIG_CRYPTO_ECB=y
-CONFIG_CRYPTO_CBC=y
-CONFIG_CRYPTO_PCBC=y
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_XTS is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
 # CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
 # CONFIG_CRYPTO_CAST5 is not set
 # CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
 # CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_SALSA20 is not set
 # CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
 # CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_TEST is not set
-# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_LZO is not set
 CONFIG_CRYPTO_HW=y
+# CONFIG_CRYPTO_DEV_HIFN_795X is not set
 # CONFIG_PPC_CLOCK is not set
+# CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/44x/rainier_defconfig b/arch/powerpc/configs/44x/rainier_defconfig
index dec18ca73519..0479648a9141 100644
--- a/arch/powerpc/configs/44x/rainier_defconfig
+++ b/arch/powerpc/configs/44x/rainier_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.25-rc2
-# Fri Feb 15 21:53:10 2008
+# Linux kernel version: 2.6.27-rc1
+# Tue Aug  5 09:09:35 2008
 #
 # CONFIG_PPC64 is not set
 
@@ -29,8 +29,12 @@ CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_TIME_VSYSCALL=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
+# CONFIG_HAVE_GET_USER_PAGES_FAST is not set
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
 CONFIG_GENERIC_HWEIGHT=y
@@ -78,6 +82,7 @@ CONFIG_FAIR_GROUP_SCHED=y
 CONFIG_USER_SCHED=y
 # CONFIG_CGROUP_SCHED is not set
 CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_RELAY is not set
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
@@ -86,6 +91,7 @@ CONFIG_INITRAMFS_SOURCE=""
 CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
@@ -111,13 +117,22 @@ CONFIG_SLUB=y
 # CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
+CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
+# CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+# CONFIG_HAVE_CLK is not set
 CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
@@ -128,6 +143,7 @@ CONFIG_LBD=y
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -142,24 +158,25 @@ CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
 CONFIG_CLASSIC_RCU=y
-# CONFIG_PREEMPT_RCU is not set
 # CONFIG_PPC4xx_PCI_EXPRESS is not set
 
 #
 # Platform support
 #
-# CONFIG_PPC_MPC512x is not set
-# CONFIG_PPC_MPC5121 is not set
 # CONFIG_PPC_CELL is not set
 # CONFIG_PPC_CELL_NATIVE is not set
 # CONFIG_PQ2ADS is not set
 # CONFIG_BAMBOO is not set
 # CONFIG_EBONY is not set
+# CONFIG_SAM440EP is not set
 # CONFIG_SEQUOIA is not set
 # CONFIG_TAISHAN is not set
 # CONFIG_KATMAI is not set
 CONFIG_RAINIER=y
 # CONFIG_WARP is not set
+# CONFIG_CANYONLANDS is not set
+# CONFIG_YOSEMITE is not set
+# CONFIG_XILINX_VIRTEX440_GENERIC_BOARD is not set
 CONFIG_440GRX=y
 # CONFIG_IPIC is not set
 # CONFIG_MPIC is not set
@@ -191,7 +208,6 @@ CONFIG_HZ=250
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
-CONFIG_RCU_TRACE=y
 CONFIG_BINFMT_ELF=y
 # CONFIG_BINFMT_MISC is not set
 CONFIG_MATH_EMULATION=y
@@ -209,14 +225,18 @@ CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
 # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_MIGRATION=y
 CONFIG_RESOURCES_64BIT=y
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
+CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 CONFIG_CMDLINE_BOOL=y
 CONFIG_CMDLINE=""
+CONFIG_EXTRA_TARGETS=""
 CONFIG_SECCOMP=y
 CONFIG_ISA_DMA_API=y
 
@@ -225,6 +245,8 @@ CONFIG_ISA_DMA_API=y
 #
 CONFIG_ZONE_DMA=y
 CONFIG_PPC_INDIRECT_PCI=y
+CONFIG_4xx_SOC=y
+CONFIG_PPC_PCI_CHOICE=y
 CONFIG_PCI=y
 CONFIG_PCI_DOMAINS=y
 CONFIG_PCI_SYSCALL=y
@@ -235,6 +257,7 @@ CONFIG_PCI_LEGACY=y
 # CONFIG_PCI_DEBUG is not set
 # CONFIG_PCCARD is not set
 # CONFIG_HOTPLUG_PCI is not set
+# CONFIG_HAS_RAPIDIO is not set
 
 #
 # Advanced setup
@@ -244,17 +267,13 @@ CONFIG_PCI_LEGACY=y
 #
 # Default settings for advanced configuration options are used
 #
-CONFIG_HIGHMEM_START=0xfe000000
 CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_PAGE_OFFSET=0xc0000000
 CONFIG_KERNEL_START=0xc0000000
+CONFIG_PHYSICAL_START=0x00000000
 CONFIG_TASK_SIZE=0xc0000000
 CONFIG_CONSISTENT_START=0xff100000
 CONFIG_CONSISTENT_SIZE=0x00200000
-CONFIG_BOOT_LOAD=0x01000000
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -292,8 +311,6 @@ CONFIG_TCP_CONG_CUBIC=y
 CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
 # CONFIG_NETWORK_SECMARK is not set
 # CONFIG_NETFILTER is not set
 # CONFIG_IP_DCCP is not set
@@ -343,6 +360,8 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_DEBUG_DRIVER is not set
 # CONFIG_DEBUG_DEVRES is not set
 # CONFIG_SYS_HYPERVISOR is not set
@@ -355,6 +374,7 @@ CONFIG_MTD_PARTITIONS=y
 # CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
 CONFIG_MTD_OF_PARTS=y
+# CONFIG_MTD_AR7_PARTS is not set
 
 #
 # User Modules And Translation Layers
@@ -445,12 +465,14 @@ CONFIG_BLK_DEV_RAM_SIZE=35000
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
 # CONFIG_XILINX_SYSACE is not set
+# CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_PHANTOM is not set
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_HP_ILO is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -468,6 +490,10 @@ CONFIG_HAVE_IDE=y
 #
 # IEEE 1394 (FireWire) support
 #
+
+#
+# Enable only one of the two stacks, unless you know what you are doing
+#
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
@@ -475,7 +501,6 @@ CONFIG_MACINTOSH_DRIVERS=y
 # CONFIG_MAC_EMUMOUSEBTN is not set
 # CONFIG_WINDFARM is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -492,7 +517,6 @@ CONFIG_NETDEV_1000=y
 # CONFIG_DL2K is not set
 # CONFIG_E1000 is not set
 # CONFIG_E1000E is not set
-# CONFIG_E1000E_ENABLED is not set
 # CONFIG_IP1000 is not set
 # CONFIG_IGB is not set
 # CONFIG_NS83820 is not set
@@ -502,12 +526,12 @@ CONFIG_NETDEV_1000=y
 # CONFIG_SIS190 is not set
 # CONFIG_SKGE is not set
 # CONFIG_SKY2 is not set
-# CONFIG_SK98LIN is not set
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
+# CONFIG_ATL1E is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
 # CONFIG_CHELSIO_T3 is not set
@@ -520,6 +544,7 @@ CONFIG_NETDEV_10000=y
 # CONFIG_MLX4_CORE is not set
 # CONFIG_TEHUTI is not set
 # CONFIG_BNX2X is not set
+# CONFIG_SFC is not set
 # CONFIG_TR is not set
 
 #
@@ -527,6 +552,7 @@ CONFIG_NETDEV_10000=y
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
 # CONFIG_WAN is not set
 # CONFIG_FDDI is not set
 # CONFIG_HIPPI is not set
@@ -553,6 +579,7 @@ CONFIG_NETDEV_10000=y
 # Character devices
 #
 # CONFIG_VT is not set
+CONFIG_DEVKMEM=y
 # CONFIG_SERIAL_NONSTANDARD is not set
 # CONFIG_NOZOMI is not set
 
@@ -591,12 +618,9 @@ CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_TCG_TPM is not set
 CONFIG_DEVPORT=y
 # CONFIG_I2C is not set
-
-#
-# SPI support
-#
 # CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+# CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
@@ -612,13 +636,24 @@ CONFIG_SSB_POSSIBLE=y
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
 
 #
 # Multimedia devices
 #
+
+#
+# Multimedia core support
+#
 # CONFIG_VIDEO_DEV is not set
 # CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
 CONFIG_DAB=y
 
 #
@@ -635,16 +670,14 @@ CONFIG_VIDEO_OUTPUT_CONTROL=m
 # Display device support
 #
 # CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Sound
-#
 # CONFIG_SOUND is not set
 CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
 CONFIG_USB_ARCH_HAS_EHCI=y
 # CONFIG_USB is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
 
 #
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
@@ -653,13 +686,11 @@ CONFIG_USB_ARCH_HAS_EHCI=y
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
 # CONFIG_INFINIBAND is not set
 # CONFIG_EDAC is not set
 # CONFIG_RTC_CLASS is not set
-
-#
-# Userspace I/O
-#
+# CONFIG_DMADEVICES is not set
 # CONFIG_UIO is not set
 
 #
@@ -674,7 +705,6 @@ CONFIG_EXT2_FS=y
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
 # CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
@@ -733,6 +763,7 @@ CONFIG_JFFS2_RTIME=y
 CONFIG_CRAMFS=y
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
 # CONFIG_ROMFS_FS is not set
@@ -743,14 +774,12 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 # CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -771,8 +800,10 @@ CONFIG_MSDOS_PARTITION=y
 # Library routines
 #
 CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
 # CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
@@ -783,6 +814,7 @@ CONFIG_PLIST=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
 
 #
 # Kernel hacking
@@ -790,6 +822,7 @@ CONFIG_HAS_DMA=y
 # CONFIG_PRINTK_TIME is not set
 CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
 # CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_FS=y
@@ -797,9 +830,12 @@ CONFIG_DEBUG_FS=y
 CONFIG_DEBUG_KERNEL=y
 # CONFIG_DEBUG_SHIRQ is not set
 CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
 CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
 # CONFIG_SLUB_DEBUG_ON is not set
 # CONFIG_SLUB_STATS is not set
 # CONFIG_DEBUG_RT_MUTEXES is not set
@@ -812,19 +848,30 @@ CONFIG_SCHED_DEBUG=y
 # CONFIG_DEBUG_BUGVERBOSE is not set
 # CONFIG_DEBUG_INFO is not set
 # CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+# CONFIG_FTRACE is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
 # CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
 # CONFIG_DEBUG_PAGEALLOC is not set
-CONFIG_DEBUGGER=y
-# CONFIG_KGDB is not set
+# CONFIG_CODE_PATCHING_SELFTEST is not set
+# CONFIG_FTR_FIXUP_SELFTEST is not set
 # CONFIG_XMON is not set
+# CONFIG_IRQSTACKS is not set
 # CONFIG_VIRQ_DEBUG is not set
 # CONFIG_BDI_SWITCH is not set
 CONFIG_PPC_EARLY_DEBUG=y
@@ -849,51 +896,85 @@ CONFIG_PPC_EARLY_DEBUG_44x_PHYSHIGH=0x1
 # CONFIG_SECURITY is not set
 # CONFIG_SECURITY_FILE_CAPABILITIES is not set
 CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
 CONFIG_CRYPTO_ALGAPI=y
 CONFIG_CRYPTO_BLKCIPHER=y
-# CONFIG_CRYPTO_SEQIV is not set
 CONFIG_CRYPTO_MANAGER=y
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=y
+# CONFIG_CRYPTO_LRW is not set
+CONFIG_CRYPTO_PCBC=y
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
 # CONFIG_CRYPTO_HMAC is not set
 # CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_NULL is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
 # CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
 # CONFIG_CRYPTO_SHA1 is not set
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
 # CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-CONFIG_CRYPTO_ECB=y
-CONFIG_CRYPTO_CBC=y
-CONFIG_CRYPTO_PCBC=y
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_XTS is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
 # CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
 # CONFIG_CRYPTO_CAST5 is not set
 # CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
 # CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_SEED is not set
 # CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
 # CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_TEST is not set
-# CONFIG_CRYPTO_AUTHENC is not set
 # CONFIG_CRYPTO_LZO is not set
 CONFIG_CRYPTO_HW=y
 # CONFIG_CRYPTO_DEV_HIFN_795X is not set
 # CONFIG_PPC_CLOCK is not set
+# CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/44x/sam440ep_defconfig b/arch/powerpc/configs/44x/sam440ep_defconfig
index 9ce5cbc2a4e7..0ed2de05f4e8 100644
--- a/arch/powerpc/configs/44x/sam440ep_defconfig
+++ b/arch/powerpc/configs/44x/sam440ep_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.25
-# Mon May  5 13:43:02 2008
+# Linux kernel version: 2.6.27-rc1
+# Tue Aug  5 09:12:48 2008
 #
 # CONFIG_PPC64 is not set
 
@@ -30,9 +30,11 @@ CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_TIME_VSYSCALL=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
+# CONFIG_HAVE_GET_USER_PAGES_FAST is not set
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
@@ -116,15 +118,22 @@ CONFIG_SLUB=y
 # CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
+CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
 # CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+# CONFIG_HAVE_CLK is not set
 CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
@@ -135,6 +144,7 @@ CONFIG_BLOCK=y
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -154,8 +164,6 @@ CONFIG_CLASSIC_RCU=y
 #
 # Platform support
 #
-# CONFIG_PPC_MPC512x is not set
-# CONFIG_PPC_MPC5121 is not set
 # CONFIG_PPC_CELL is not set
 # CONFIG_PPC_CELL_NATIVE is not set
 # CONFIG_PQ2ADS is not set
@@ -169,6 +177,7 @@ CONFIG_SAM440EP=y
 # CONFIG_WARP is not set
 # CONFIG_CANYONLANDS is not set
 # CONFIG_YOSEMITE is not set
+# CONFIG_XILINX_VIRTEX440_GENERIC_BOARD is not set
 CONFIG_440EP=y
 CONFIG_IBM440EP_ERR42=y
 # CONFIG_IPIC is not set
@@ -220,6 +229,7 @@ CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_MIGRATION=y
 CONFIG_RESOURCES_64BIT=y
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
@@ -228,6 +238,7 @@ CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 CONFIG_CMDLINE_BOOL=y
 CONFIG_CMDLINE=""
+CONFIG_EXTRA_TARGETS=""
 CONFIG_SECCOMP=y
 CONFIG_ISA_DMA_API=y
 
@@ -237,6 +248,7 @@ CONFIG_ISA_DMA_API=y
 CONFIG_ZONE_DMA=y
 CONFIG_PPC_INDIRECT_PCI=y
 CONFIG_4xx_SOC=y
+CONFIG_PPC_PCI_CHOICE=y
 CONFIG_PCI=y
 CONFIG_PCI_DOMAINS=y
 CONFIG_PCI_SYSCALL=y
@@ -263,10 +275,6 @@ CONFIG_PHYSICAL_START=0x00000000
 CONFIG_TASK_SIZE=0xc0000000
 CONFIG_CONSISTENT_START=0xff100000
 CONFIG_CONSISTENT_SIZE=0x00200000
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -353,6 +361,8 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_SYS_HYPERVISOR is not set
 CONFIG_CONNECTOR=y
 CONFIG_PROC_EVENTS=y
@@ -379,6 +389,7 @@ CONFIG_BLK_DEV_RAM_SIZE=35000
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
 # CONFIG_XILINX_SYSACE is not set
+# CONFIG_BLK_DEV_HD is not set
 # CONFIG_MISC_DEVICES is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
@@ -422,6 +433,7 @@ CONFIG_SCSI_WAIT_SCAN=m
 # CONFIG_SCSI_SAS_LIBSAS is not set
 # CONFIG_SCSI_SRP_ATTRS is not set
 # CONFIG_SCSI_LOWLEVEL is not set
+# CONFIG_SCSI_DH is not set
 CONFIG_ATA=y
 # CONFIG_ATA_NONSTANDARD is not set
 # CONFIG_SATA_PMP is not set
@@ -481,18 +493,22 @@ CONFIG_SATA_SIL=y
 # CONFIG_PATA_VIA is not set
 # CONFIG_PATA_WINBOND is not set
 # CONFIG_PATA_PLATFORM is not set
+# CONFIG_PATA_SCH is not set
 # CONFIG_MD is not set
 # CONFIG_FUSION is not set
 
 #
 # IEEE 1394 (FireWire) support
 #
+
+#
+# Enable only one of the two stacks, unless you know what you are doing
+#
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -531,7 +547,6 @@ CONFIG_IBM_NEW_EMAC_ZMII=y
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI is not set
 # CONFIG_IWLWIFI_LEDS is not set
 
 #
@@ -607,12 +622,14 @@ CONFIG_SERIO_SERPORT=y
 # CONFIG_SERIO_PCIPS2 is not set
 CONFIG_SERIO_LIBPS2=y
 # CONFIG_SERIO_RAW is not set
+# CONFIG_SERIO_XILINX_XPS_PS2 is not set
 # CONFIG_GAMEPORT is not set
 
 #
 # Character devices
 #
 CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
 # CONFIG_VT_HW_CONSOLE_BINDING is not set
@@ -661,40 +678,60 @@ CONFIG_I2C_ALGOBIT=y
 #
 # I2C Hardware Bus support
 #
+
+#
+# PC SMBus host controller drivers
+#
 # CONFIG_I2C_ALI1535 is not set
 # CONFIG_I2C_ALI1563 is not set
 # CONFIG_I2C_ALI15X3 is not set
 # CONFIG_I2C_AMD756 is not set
 # CONFIG_I2C_AMD8111 is not set
 # CONFIG_I2C_I801 is not set
-# CONFIG_I2C_I810 is not set
+# CONFIG_I2C_ISCH is not set
 # CONFIG_I2C_PIIX4 is not set
-CONFIG_I2C_IBM_IIC=y
-# CONFIG_I2C_MPC is not set
 # CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_PROSAVAGE is not set
-# CONFIG_I2C_SAVAGE4 is not set
-# CONFIG_I2C_SIMTEC is not set
 # CONFIG_I2C_SIS5595 is not set
 # CONFIG_I2C_SIS630 is not set
 # CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_TINY_USB is not set
 # CONFIG_I2C_VIA is not set
 # CONFIG_I2C_VIAPRO is not set
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+CONFIG_I2C_IBM_IIC=y
+# CONFIG_I2C_MPC is not set
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Graphics adapter I2C/DDC channel drivers
+#
 # CONFIG_I2C_VOODOO3 is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
 # CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
 
 #
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
+# CONFIG_AT24 is not set
 # CONFIG_SENSORS_EEPROM is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
@@ -703,10 +740,13 @@ CONFIG_I2C_IBM_IIC=y
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
 # CONFIG_SPI is not set
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+# CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 # CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
 
 #
@@ -718,6 +758,7 @@ CONFIG_SSB_POSSIBLE=y
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
 
@@ -730,6 +771,7 @@ CONFIG_SSB_POSSIBLE=y
 #
 # CONFIG_VIDEO_DEV is not set
 # CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
 
 #
 # Multimedia drivers
@@ -755,7 +797,6 @@ CONFIG_FB_CFB_IMAGEBLIT=y
 # CONFIG_FB_SYS_IMAGEBLIT is not set
 # CONFIG_FB_FOREIGN_ENDIAN is not set
 # CONFIG_FB_SYS_FOPS is not set
-CONFIG_FB_DEFERRED_IO=y
 # CONFIG_FB_SVGALIB is not set
 CONFIG_FB_MACMODES=y
 CONFIG_FB_BACKLIGHT=y
@@ -795,10 +836,13 @@ CONFIG_FB_RADEON_BACKLIGHT=y
 # CONFIG_FB_TRIDENT is not set
 # CONFIG_FB_ARK is not set
 # CONFIG_FB_PM3 is not set
+# CONFIG_FB_CARMINE is not set
 # CONFIG_FB_IBM_GXT4500 is not set
 # CONFIG_FB_VIRTUAL is not set
 CONFIG_BACKLIGHT_LCD_SUPPORT=y
 CONFIG_LCD_CLASS_DEVICE=y
+# CONFIG_LCD_ILI9320 is not set
+# CONFIG_LCD_PLATFORM is not set
 CONFIG_BACKLIGHT_CLASS_DEVICE=y
 # CONFIG_BACKLIGHT_CORGI is not set
 
@@ -821,10 +865,6 @@ CONFIG_LOGO=y
 CONFIG_LOGO_LINUX_MONO=y
 CONFIG_LOGO_LINUX_VGA16=y
 CONFIG_LOGO_LINUX_CLUT224=y
-
-#
-# Sound
-#
 # CONFIG_SOUND is not set
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
@@ -859,11 +899,13 @@ CONFIG_USB_DEVICEFS=y
 #
 # USB Host Controller Drivers
 #
+# CONFIG_USB_C67X00_HCD is not set
 CONFIG_USB_EHCI_HCD=m
 # CONFIG_USB_EHCI_ROOT_HUB_TT is not set
 # CONFIG_USB_EHCI_TT_NEWSCHED is not set
 CONFIG_USB_EHCI_HCD_PPC_OF=y
 # CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
 CONFIG_USB_OHCI_HCD=y
 CONFIG_USB_OHCI_HCD_PPC_OF=y
 CONFIG_USB_OHCI_HCD_PPC_OF_BE=y
@@ -881,6 +923,7 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y
 #
 # CONFIG_USB_ACM is not set
 # CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
 
 #
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
@@ -900,6 +943,7 @@ CONFIG_USB_STORAGE=m
 # CONFIG_USB_STORAGE_SDDR55 is not set
 # CONFIG_USB_STORAGE_JUMPSHOT is not set
 # CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_ONETOUCH is not set
 # CONFIG_USB_STORAGE_KARMA is not set
 # CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
 # CONFIG_USB_LIBUSUAL is not set
@@ -939,6 +983,7 @@ CONFIG_USB_STORAGE=m
 # CONFIG_USB_TRANCEVIBRATOR is not set
 # CONFIG_USB_IOWARRIOR is not set
 # CONFIG_USB_TEST is not set
+# CONFIG_USB_ISIGHTFW is not set
 # CONFIG_USB_GADGET is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
@@ -976,6 +1021,7 @@ CONFIG_RTC_INTF_DEV=y
 CONFIG_RTC_DRV_M41T80=y
 CONFIG_RTC_DRV_M41T80_WDT=y
 # CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
 
 #
 # SPI RTC drivers
@@ -996,6 +1042,7 @@ CONFIG_RTC_DRV_M41T80_WDT=y
 #
 # on-CPU RTC drivers
 #
+# CONFIG_RTC_DRV_PPC is not set
 # CONFIG_DMADEVICES is not set
 # CONFIG_UIO is not set
 
@@ -1074,6 +1121,7 @@ CONFIG_AFFS_FS=m
 # CONFIG_CRAMFS is not set
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
 # CONFIG_ROMFS_FS is not set
@@ -1151,6 +1199,7 @@ CONFIG_BITREVERSE=y
 # CONFIG_GENERIC_FIND_FIRST_BIT is not set
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
+CONFIG_CRC_T10DIF=y
 CONFIG_CRC_ITU_T=y
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
@@ -1177,7 +1226,15 @@ CONFIG_MAGIC_SYSRQ=y
 # CONFIG_SLUB_DEBUG_ON is not set
 # CONFIG_SLUB_STATS is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+# CONFIG_FTRACE is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
 # CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_IRQSTACKS is not set
 # CONFIG_PPC_EARLY_DEBUG is not set
 
diff --git a/arch/powerpc/configs/44x/sequoia_defconfig b/arch/powerpc/configs/44x/sequoia_defconfig
index dd5d6303c396..e40b1023265c 100644
--- a/arch/powerpc/configs/44x/sequoia_defconfig
+++ b/arch/powerpc/configs/44x/sequoia_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.25-rc2
-# Fri Feb 15 21:53:46 2008
+# Linux kernel version: 2.6.27-rc1
+# Tue Aug  5 09:15:13 2008
 #
 # CONFIG_PPC64 is not set
 
@@ -30,8 +30,12 @@ CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_TIME_VSYSCALL=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
+# CONFIG_HAVE_GET_USER_PAGES_FAST is not set
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
 CONFIG_GENERIC_HWEIGHT=y
@@ -79,6 +83,7 @@ CONFIG_GROUP_SCHED=y
 CONFIG_USER_SCHED=y
 # CONFIG_CGROUP_SCHED is not set
 CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_RELAY is not set
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
@@ -87,6 +92,7 @@ CONFIG_INITRAMFS_SOURCE=""
 CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
@@ -112,13 +118,22 @@ CONFIG_SLUB=y
 # CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
+CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
+# CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+# CONFIG_HAVE_CLK is not set
 CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
@@ -129,6 +144,7 @@ CONFIG_LBD=y
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -143,24 +159,25 @@ CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
 CONFIG_CLASSIC_RCU=y
-# CONFIG_PREEMPT_RCU is not set
 # CONFIG_PPC4xx_PCI_EXPRESS is not set
 
 #
 # Platform support
 #
-# CONFIG_PPC_MPC512x is not set
-# CONFIG_PPC_MPC5121 is not set
 # CONFIG_PPC_CELL is not set
 # CONFIG_PPC_CELL_NATIVE is not set
 # CONFIG_PQ2ADS is not set
 # CONFIG_BAMBOO is not set
 # CONFIG_EBONY is not set
+# CONFIG_SAM440EP is not set
 CONFIG_SEQUOIA=y
 # CONFIG_TAISHAN is not set
 # CONFIG_KATMAI is not set
 # CONFIG_RAINIER is not set
 # CONFIG_WARP is not set
+# CONFIG_CANYONLANDS is not set
+# CONFIG_YOSEMITE is not set
+# CONFIG_XILINX_VIRTEX440_GENERIC_BOARD is not set
 CONFIG_440EPX=y
 # CONFIG_IPIC is not set
 # CONFIG_MPIC is not set
@@ -192,7 +209,6 @@ CONFIG_HZ=250
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
-CONFIG_RCU_TRACE=y
 CONFIG_BINFMT_ELF=y
 # CONFIG_BINFMT_MISC is not set
 # CONFIG_MATH_EMULATION is not set
@@ -210,14 +226,18 @@ CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
 # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_MIGRATION=y
 CONFIG_RESOURCES_64BIT=y
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
+CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 CONFIG_CMDLINE_BOOL=y
 CONFIG_CMDLINE=""
+CONFIG_EXTRA_TARGETS=""
 CONFIG_SECCOMP=y
 CONFIG_ISA_DMA_API=y
 
@@ -226,6 +246,8 @@ CONFIG_ISA_DMA_API=y
 #
 CONFIG_ZONE_DMA=y
 CONFIG_PPC_INDIRECT_PCI=y
+CONFIG_4xx_SOC=y
+CONFIG_PPC_PCI_CHOICE=y
 CONFIG_PCI=y
 CONFIG_PCI_DOMAINS=y
 CONFIG_PCI_SYSCALL=y
@@ -236,6 +258,7 @@ CONFIG_PCI_LEGACY=y
 # CONFIG_PCI_DEBUG is not set
 # CONFIG_PCCARD is not set
 # CONFIG_HOTPLUG_PCI is not set
+# CONFIG_HAS_RAPIDIO is not set
 
 #
 # Advanced setup
@@ -245,17 +268,13 @@ CONFIG_PCI_LEGACY=y
 #
 # Default settings for advanced configuration options are used
 #
-CONFIG_HIGHMEM_START=0xfe000000
 CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_PAGE_OFFSET=0xc0000000
 CONFIG_KERNEL_START=0xc0000000
+CONFIG_PHYSICAL_START=0x00000000
 CONFIG_TASK_SIZE=0xc0000000
 CONFIG_CONSISTENT_START=0xff100000
 CONFIG_CONSISTENT_SIZE=0x00200000
-CONFIG_BOOT_LOAD=0x01000000
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -293,8 +312,6 @@ CONFIG_TCP_CONG_CUBIC=y
 CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
 # CONFIG_NETWORK_SECMARK is not set
 # CONFIG_NETFILTER is not set
 # CONFIG_IP_DCCP is not set
@@ -344,6 +361,8 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_DEBUG_DRIVER is not set
 # CONFIG_DEBUG_DEVRES is not set
 # CONFIG_SYS_HYPERVISOR is not set
@@ -356,6 +375,7 @@ CONFIG_MTD_PARTITIONS=y
 # CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
 CONFIG_MTD_OF_PARTS=y
+# CONFIG_MTD_AR7_PARTS is not set
 
 #
 # User Modules And Translation Layers
@@ -446,12 +466,14 @@ CONFIG_BLK_DEV_RAM_SIZE=35000
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
 # CONFIG_XILINX_SYSACE is not set
+# CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_PHANTOM is not set
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_HP_ILO is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -469,12 +491,15 @@ CONFIG_HAVE_IDE=y
 #
 # IEEE 1394 (FireWire) support
 #
+
+#
+# Enable only one of the two stacks, unless you know what you are doing
+#
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -509,7 +534,6 @@ CONFIG_NETDEV_1000=y
 # CONFIG_DL2K is not set
 # CONFIG_E1000 is not set
 # CONFIG_E1000E is not set
-# CONFIG_E1000E_ENABLED is not set
 # CONFIG_IP1000 is not set
 # CONFIG_IGB is not set
 # CONFIG_NS83820 is not set
@@ -519,12 +543,12 @@ CONFIG_NETDEV_1000=y
 # CONFIG_SIS190 is not set
 # CONFIG_SKGE is not set
 # CONFIG_SKY2 is not set
-# CONFIG_SK98LIN is not set
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
+# CONFIG_ATL1E is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
 # CONFIG_CHELSIO_T3 is not set
@@ -537,6 +561,7 @@ CONFIG_NETDEV_10000=y
 # CONFIG_MLX4_CORE is not set
 # CONFIG_TEHUTI is not set
 # CONFIG_BNX2X is not set
+# CONFIG_SFC is not set
 # CONFIG_TR is not set
 
 #
@@ -544,6 +569,7 @@ CONFIG_NETDEV_10000=y
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
 # CONFIG_WAN is not set
 # CONFIG_FDDI is not set
 # CONFIG_HIPPI is not set
@@ -570,6 +596,7 @@ CONFIG_NETDEV_10000=y
 # Character devices
 #
 # CONFIG_VT is not set
+CONFIG_DEVKMEM=y
 # CONFIG_SERIAL_NONSTANDARD is not set
 # CONFIG_NOZOMI is not set
 
@@ -608,12 +635,9 @@ CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_TCG_TPM is not set
 CONFIG_DEVPORT=y
 # CONFIG_I2C is not set
-
-#
-# SPI support
-#
 # CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+# CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
@@ -629,13 +653,24 @@ CONFIG_SSB_POSSIBLE=y
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
 
 #
 # Multimedia devices
 #
+
+#
+# Multimedia core support
+#
 # CONFIG_VIDEO_DEV is not set
 # CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
 CONFIG_DAB=y
 
 #
@@ -652,16 +687,14 @@ CONFIG_VIDEO_OUTPUT_CONTROL=m
 # Display device support
 #
 # CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Sound
-#
 # CONFIG_SOUND is not set
 CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
 CONFIG_USB_ARCH_HAS_EHCI=y
 # CONFIG_USB is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
 
 #
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
@@ -670,13 +703,11 @@ CONFIG_USB_ARCH_HAS_EHCI=y
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
 # CONFIG_INFINIBAND is not set
 # CONFIG_EDAC is not set
 # CONFIG_RTC_CLASS is not set
-
-#
-# Userspace I/O
-#
+# CONFIG_DMADEVICES is not set
 # CONFIG_UIO is not set
 
 #
@@ -691,7 +722,6 @@ CONFIG_EXT2_FS=y
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
 # CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
@@ -750,6 +780,7 @@ CONFIG_JFFS2_RTIME=y
 CONFIG_CRAMFS=y
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
 # CONFIG_ROMFS_FS is not set
@@ -760,14 +791,12 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 # CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -788,8 +817,10 @@ CONFIG_MSDOS_PARTITION=y
 # Library routines
 #
 CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
 # CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
@@ -800,6 +831,7 @@ CONFIG_PLIST=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
 
 #
 # Kernel hacking
@@ -807,6 +839,7 @@ CONFIG_HAS_DMA=y
 # CONFIG_PRINTK_TIME is not set
 CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
 # CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_FS=y
@@ -814,9 +847,12 @@ CONFIG_DEBUG_FS=y
 CONFIG_DEBUG_KERNEL=y
 # CONFIG_DEBUG_SHIRQ is not set
 CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
 CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
 # CONFIG_SLUB_DEBUG_ON is not set
 # CONFIG_SLUB_STATS is not set
 # CONFIG_DEBUG_RT_MUTEXES is not set
@@ -829,19 +865,30 @@ CONFIG_SCHED_DEBUG=y
 # CONFIG_DEBUG_BUGVERBOSE is not set
 # CONFIG_DEBUG_INFO is not set
 # CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+# CONFIG_FTRACE is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
 # CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
 # CONFIG_DEBUG_PAGEALLOC is not set
-CONFIG_DEBUGGER=y
-# CONFIG_KGDB is not set
+# CONFIG_CODE_PATCHING_SELFTEST is not set
+# CONFIG_FTR_FIXUP_SELFTEST is not set
 # CONFIG_XMON is not set
+# CONFIG_IRQSTACKS is not set
 # CONFIG_VIRQ_DEBUG is not set
 # CONFIG_BDI_SWITCH is not set
 CONFIG_PPC_EARLY_DEBUG=y
@@ -866,51 +913,85 @@ CONFIG_PPC_EARLY_DEBUG_44x_PHYSHIGH=0x1
 # CONFIG_SECURITY is not set
 # CONFIG_SECURITY_FILE_CAPABILITIES is not set
 CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
 CONFIG_CRYPTO_ALGAPI=y
 CONFIG_CRYPTO_BLKCIPHER=y
-# CONFIG_CRYPTO_SEQIV is not set
 CONFIG_CRYPTO_MANAGER=y
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=y
+# CONFIG_CRYPTO_LRW is not set
+CONFIG_CRYPTO_PCBC=y
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
 # CONFIG_CRYPTO_HMAC is not set
 # CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_NULL is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
 # CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
 # CONFIG_CRYPTO_SHA1 is not set
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
 # CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-CONFIG_CRYPTO_ECB=y
-CONFIG_CRYPTO_CBC=y
-CONFIG_CRYPTO_PCBC=y
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_XTS is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
 # CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
 # CONFIG_CRYPTO_CAST5 is not set
 # CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
 # CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_SEED is not set
 # CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
 # CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_TEST is not set
-# CONFIG_CRYPTO_AUTHENC is not set
 # CONFIG_CRYPTO_LZO is not set
 CONFIG_CRYPTO_HW=y
 # CONFIG_CRYPTO_DEV_HIFN_795X is not set
 # CONFIG_PPC_CLOCK is not set
+# CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/44x/taishan_defconfig b/arch/powerpc/configs/44x/taishan_defconfig
index e53c92655bd6..5075873bdb1b 100644
--- a/arch/powerpc/configs/44x/taishan_defconfig
+++ b/arch/powerpc/configs/44x/taishan_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.25-rc2
-# Fri Feb 15 21:40:44 2008
+# Linux kernel version: 2.6.27-rc1
+# Tue Aug  5 09:17:48 2008
 #
 # CONFIG_PPC64 is not set
 
@@ -29,8 +29,12 @@ CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_TIME_VSYSCALL=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
+# CONFIG_HAVE_GET_USER_PAGES_FAST is not set
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
 CONFIG_GENERIC_HWEIGHT=y
@@ -78,6 +82,7 @@ CONFIG_FAIR_GROUP_SCHED=y
 CONFIG_USER_SCHED=y
 # CONFIG_CGROUP_SCHED is not set
 CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_RELAY is not set
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
@@ -86,6 +91,7 @@ CONFIG_INITRAMFS_SOURCE=""
 CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
@@ -111,13 +117,22 @@ CONFIG_SLUB=y
 # CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
+CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
+# CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+# CONFIG_HAVE_CLK is not set
 CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
@@ -128,6 +143,7 @@ CONFIG_LBD=y
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -142,24 +158,25 @@ CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
 CONFIG_CLASSIC_RCU=y
-# CONFIG_PREEMPT_RCU is not set
 # CONFIG_PPC4xx_PCI_EXPRESS is not set
 
 #
 # Platform support
 #
-# CONFIG_PPC_MPC512x is not set
-# CONFIG_PPC_MPC5121 is not set
 # CONFIG_PPC_CELL is not set
 # CONFIG_PPC_CELL_NATIVE is not set
 # CONFIG_PQ2ADS is not set
 # CONFIG_BAMBOO is not set
 # CONFIG_EBONY is not set
+# CONFIG_SAM440EP is not set
 # CONFIG_SEQUOIA is not set
 CONFIG_TAISHAN=y
 # CONFIG_KATMAI is not set
 # CONFIG_RAINIER is not set
 # CONFIG_WARP is not set
+# CONFIG_CANYONLANDS is not set
+# CONFIG_YOSEMITE is not set
+# CONFIG_XILINX_VIRTEX440_GENERIC_BOARD is not set
 CONFIG_440GX=y
 # CONFIG_IPIC is not set
 # CONFIG_MPIC is not set
@@ -191,7 +208,6 @@ CONFIG_HZ=250
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
-CONFIG_RCU_TRACE=y
 CONFIG_BINFMT_ELF=y
 # CONFIG_BINFMT_MISC is not set
 # CONFIG_MATH_EMULATION is not set
@@ -209,14 +225,18 @@ CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
 # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_MIGRATION=y
 CONFIG_RESOURCES_64BIT=y
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
+CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 CONFIG_CMDLINE_BOOL=y
 CONFIG_CMDLINE=""
+CONFIG_EXTRA_TARGETS=""
 CONFIG_SECCOMP=y
 CONFIG_ISA_DMA_API=y
 
@@ -225,6 +245,8 @@ CONFIG_ISA_DMA_API=y
 #
 CONFIG_ZONE_DMA=y
 CONFIG_PPC_INDIRECT_PCI=y
+CONFIG_4xx_SOC=y
+CONFIG_PPC_PCI_CHOICE=y
 CONFIG_PCI=y
 CONFIG_PCI_DOMAINS=y
 CONFIG_PCI_SYSCALL=y
@@ -235,6 +257,7 @@ CONFIG_PCI_LEGACY=y
 # CONFIG_PCI_DEBUG is not set
 # CONFIG_PCCARD is not set
 # CONFIG_HOTPLUG_PCI is not set
+# CONFIG_HAS_RAPIDIO is not set
 
 #
 # Advanced setup
@@ -244,17 +267,13 @@ CONFIG_PCI_LEGACY=y
 #
 # Default settings for advanced configuration options are used
 #
-CONFIG_HIGHMEM_START=0xfe000000
 CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_PAGE_OFFSET=0xc0000000
 CONFIG_KERNEL_START=0xc0000000
+CONFIG_PHYSICAL_START=0x00000000
 CONFIG_TASK_SIZE=0xc0000000
 CONFIG_CONSISTENT_START=0xff100000
 CONFIG_CONSISTENT_SIZE=0x00200000
-CONFIG_BOOT_LOAD=0x01000000
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -292,8 +311,6 @@ CONFIG_TCP_CONG_CUBIC=y
 CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
 # CONFIG_NETWORK_SECMARK is not set
 # CONFIG_NETFILTER is not set
 # CONFIG_IP_DCCP is not set
@@ -343,6 +360,8 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_DEBUG_DRIVER is not set
 # CONFIG_DEBUG_DEVRES is not set
 # CONFIG_SYS_HYPERVISOR is not set
@@ -354,6 +373,8 @@ CONFIG_MTD=y
 CONFIG_MTD_PARTITIONS=y
 # CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_OF_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
 
 #
 # User Modules And Translation Layers
@@ -444,12 +465,14 @@ CONFIG_BLK_DEV_RAM_SIZE=35000
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
 # CONFIG_XILINX_SYSACE is not set
+# CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_PHANTOM is not set
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_HP_ILO is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -467,6 +490,10 @@ CONFIG_HAVE_IDE=y
 #
 # IEEE 1394 (FireWire) support
 #
+
+#
+# Enable only one of the two stacks, unless you know what you are doing
+#
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
@@ -474,7 +501,6 @@ CONFIG_MACINTOSH_DRIVERS=y
 # CONFIG_MAC_EMUMOUSEBTN is not set
 # CONFIG_WINDFARM is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -509,7 +535,6 @@ CONFIG_NETDEV_1000=y
 # CONFIG_DL2K is not set
 # CONFIG_E1000 is not set
 # CONFIG_E1000E is not set
-# CONFIG_E1000E_ENABLED is not set
 # CONFIG_IP1000 is not set
 # CONFIG_IGB is not set
 # CONFIG_NS83820 is not set
@@ -519,12 +544,12 @@ CONFIG_NETDEV_1000=y
 # CONFIG_SIS190 is not set
 # CONFIG_SKGE is not set
 # CONFIG_SKY2 is not set
-# CONFIG_SK98LIN is not set
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
+# CONFIG_ATL1E is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
 # CONFIG_CHELSIO_T3 is not set
@@ -537,6 +562,7 @@ CONFIG_NETDEV_10000=y
 # CONFIG_MLX4_CORE is not set
 # CONFIG_TEHUTI is not set
 # CONFIG_BNX2X is not set
+# CONFIG_SFC is not set
 # CONFIG_TR is not set
 
 #
@@ -544,6 +570,7 @@ CONFIG_NETDEV_10000=y
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
 # CONFIG_WAN is not set
 # CONFIG_FDDI is not set
 # CONFIG_HIPPI is not set
@@ -570,6 +597,7 @@ CONFIG_NETDEV_10000=y
 # Character devices
 #
 # CONFIG_VT is not set
+CONFIG_DEVKMEM=y
 # CONFIG_SERIAL_NONSTANDARD is not set
 # CONFIG_NOZOMI is not set
 
@@ -608,12 +636,9 @@ CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_TCG_TPM is not set
 CONFIG_DEVPORT=y
 # CONFIG_I2C is not set
-
-#
-# SPI support
-#
 # CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+# CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
@@ -629,13 +654,24 @@ CONFIG_SSB_POSSIBLE=y
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
 
 #
 # Multimedia devices
 #
+
+#
+# Multimedia core support
+#
 # CONFIG_VIDEO_DEV is not set
 # CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
 CONFIG_DAB=y
 
 #
@@ -652,16 +688,14 @@ CONFIG_VIDEO_OUTPUT_CONTROL=m
 # Display device support
 #
 # CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Sound
-#
 # CONFIG_SOUND is not set
 CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
 CONFIG_USB_ARCH_HAS_EHCI=y
 # CONFIG_USB is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
 
 #
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
@@ -670,13 +704,11 @@ CONFIG_USB_ARCH_HAS_EHCI=y
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
 # CONFIG_INFINIBAND is not set
 # CONFIG_EDAC is not set
 # CONFIG_RTC_CLASS is not set
-
-#
-# Userspace I/O
-#
+# CONFIG_DMADEVICES is not set
 # CONFIG_UIO is not set
 
 #
@@ -691,7 +723,6 @@ CONFIG_EXT2_FS=y
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
 # CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
@@ -740,6 +771,7 @@ CONFIG_TMPFS=y
 CONFIG_CRAMFS=y
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
 # CONFIG_ROMFS_FS is not set
@@ -750,14 +782,12 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 # CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -778,8 +808,10 @@ CONFIG_MSDOS_PARTITION=y
 # Library routines
 #
 CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
 # CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
@@ -789,6 +821,7 @@ CONFIG_PLIST=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
 
 #
 # Kernel hacking
@@ -796,6 +829,7 @@ CONFIG_HAS_DMA=y
 # CONFIG_PRINTK_TIME is not set
 CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
 # CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_FS=y
@@ -803,9 +837,12 @@ CONFIG_DEBUG_FS=y
 CONFIG_DEBUG_KERNEL=y
 # CONFIG_DEBUG_SHIRQ is not set
 CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
 CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
 # CONFIG_SLUB_DEBUG_ON is not set
 # CONFIG_SLUB_STATS is not set
 # CONFIG_DEBUG_RT_MUTEXES is not set
@@ -818,19 +855,30 @@ CONFIG_SCHED_DEBUG=y
 # CONFIG_DEBUG_BUGVERBOSE is not set
 # CONFIG_DEBUG_INFO is not set
 # CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+# CONFIG_FTRACE is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
 # CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
 # CONFIG_DEBUG_PAGEALLOC is not set
-CONFIG_DEBUGGER=y
-# CONFIG_KGDB is not set
+# CONFIG_CODE_PATCHING_SELFTEST is not set
+# CONFIG_FTR_FIXUP_SELFTEST is not set
 # CONFIG_XMON is not set
+# CONFIG_IRQSTACKS is not set
 # CONFIG_VIRQ_DEBUG is not set
 # CONFIG_BDI_SWITCH is not set
 # CONFIG_PPC_EARLY_DEBUG is not set
@@ -842,51 +890,85 @@ CONFIG_DEBUGGER=y
 # CONFIG_SECURITY is not set
 # CONFIG_SECURITY_FILE_CAPABILITIES is not set
 CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
 CONFIG_CRYPTO_ALGAPI=y
 CONFIG_CRYPTO_BLKCIPHER=y
-# CONFIG_CRYPTO_SEQIV is not set
 CONFIG_CRYPTO_MANAGER=y
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=y
+# CONFIG_CRYPTO_LRW is not set
+CONFIG_CRYPTO_PCBC=y
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
 # CONFIG_CRYPTO_HMAC is not set
 # CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_NULL is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
 # CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
 # CONFIG_CRYPTO_SHA1 is not set
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
 # CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-CONFIG_CRYPTO_ECB=y
-CONFIG_CRYPTO_CBC=y
-CONFIG_CRYPTO_PCBC=y
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_XTS is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
 # CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
 # CONFIG_CRYPTO_CAST5 is not set
 # CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
 # CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_SEED is not set
 # CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
 # CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_TEST is not set
-# CONFIG_CRYPTO_AUTHENC is not set
 # CONFIG_CRYPTO_LZO is not set
 CONFIG_CRYPTO_HW=y
 # CONFIG_CRYPTO_DEV_HIFN_795X is not set
 # CONFIG_PPC_CLOCK is not set
+# CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/44x/virtex5_defconfig b/arch/powerpc/configs/44x/virtex5_defconfig
index 9c41f66b5a7d..663ec512b33b 100644
--- a/arch/powerpc/configs/44x/virtex5_defconfig
+++ b/arch/powerpc/configs/44x/virtex5_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc8
-# Wed Jul  2 15:36:41 2008
+# Linux kernel version: 2.6.27-rc1
+# Tue Aug  5 09:20:16 2008
 #
 # CONFIG_PPC64 is not set
 
@@ -29,9 +29,11 @@ CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_TIME_VSYSCALL=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
+# CONFIG_HAVE_GET_USER_PAGES_FAST is not set
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
@@ -115,10 +117,16 @@ CONFIG_SLAB=y
 # CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
+CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
 # CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+# CONFIG_HAVE_CLK is not set
 CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
@@ -135,6 +143,7 @@ CONFIG_BLOCK=y
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -154,13 +163,12 @@ CONFIG_CLASSIC_RCU=y
 #
 # Platform support
 #
-# CONFIG_PPC_MPC512x is not set
-# CONFIG_PPC_MPC5121 is not set
 # CONFIG_PPC_CELL is not set
 # CONFIG_PPC_CELL_NATIVE is not set
 # CONFIG_PQ2ADS is not set
 # CONFIG_BAMBOO is not set
 # CONFIG_EBONY is not set
+# CONFIG_SAM440EP is not set
 # CONFIG_SEQUOIA is not set
 # CONFIG_TAISHAN is not set
 # CONFIG_KATMAI is not set
@@ -221,6 +229,7 @@ CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_MIGRATION=y
 CONFIG_RESOURCES_64BIT=y
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
@@ -239,6 +248,7 @@ CONFIG_ISA_DMA_API=y
 CONFIG_ZONE_DMA=y
 CONFIG_PPC_INDIRECT_PCI=y
 CONFIG_4xx_SOC=y
+CONFIG_PPC_PCI_CHOICE=y
 CONFIG_PCI=y
 CONFIG_PCI_DOMAINS=y
 CONFIG_PCI_SYSCALL=y
@@ -265,10 +275,6 @@ CONFIG_PHYSICAL_START=0x00000000
 CONFIG_TASK_SIZE=0xc0000000
 CONFIG_CONSISTENT_START=0xff100000
 CONFIG_CONSISTENT_SIZE=0x00200000
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -446,7 +452,9 @@ CONFIG_IP_NF_MANGLE=m
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
+CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_SYS_HYPERVISOR is not set
 # CONFIG_CONNECTOR is not set
 # CONFIG_MTD is not set
@@ -471,12 +479,14 @@ CONFIG_BLK_DEV_RAM_SIZE=8192
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
 # CONFIG_XILINX_SYSACE is not set
+# CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_PHANTOM is not set
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_HP_ILO is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -503,7 +513,6 @@ CONFIG_HAVE_IDE=y
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -532,7 +541,6 @@ CONFIG_NETDEV_1000=y
 # CONFIG_DL2K is not set
 # CONFIG_E1000 is not set
 # CONFIG_E1000E is not set
-# CONFIG_E1000E_ENABLED is not set
 # CONFIG_IP1000 is not set
 # CONFIG_IGB is not set
 # CONFIG_NS83820 is not set
@@ -547,6 +555,7 @@ CONFIG_NETDEV_1000=y
 # CONFIG_BNX2 is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
+# CONFIG_ATL1E is not set
 # CONFIG_NETDEV_10000 is not set
 # CONFIG_TR is not set
 
@@ -619,12 +628,14 @@ CONFIG_SERIO_SERPORT=y
 # CONFIG_SERIO_PCIPS2 is not set
 CONFIG_SERIO_LIBPS2=y
 # CONFIG_SERIO_RAW is not set
+# CONFIG_SERIO_XILINX_XPS_PS2 is not set
 # CONFIG_GAMEPORT is not set
 
 #
 # Character devices
 #
 CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
 # CONFIG_VT_HW_CONSOLE_BINDING is not set
@@ -670,39 +681,59 @@ CONFIG_I2C_CHARDEV=y
 #
 # I2C Hardware Bus support
 #
+
+#
+# PC SMBus host controller drivers
+#
 # CONFIG_I2C_ALI1535 is not set
 # CONFIG_I2C_ALI1563 is not set
 # CONFIG_I2C_ALI15X3 is not set
 # CONFIG_I2C_AMD756 is not set
 # CONFIG_I2C_AMD8111 is not set
 # CONFIG_I2C_I801 is not set
-# CONFIG_I2C_I810 is not set
+# CONFIG_I2C_ISCH is not set
 # CONFIG_I2C_PIIX4 is not set
-# CONFIG_I2C_IBM_IIC is not set
-# CONFIG_I2C_MPC is not set
 # CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_PROSAVAGE is not set
-# CONFIG_I2C_SAVAGE4 is not set
-# CONFIG_I2C_SIMTEC is not set
 # CONFIG_I2C_SIS5595 is not set
 # CONFIG_I2C_SIS630 is not set
 # CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_STUB is not set
 # CONFIG_I2C_VIA is not set
 # CONFIG_I2C_VIAPRO is not set
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+# CONFIG_I2C_IBM_IIC is not set
+# CONFIG_I2C_MPC is not set
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+
+#
+# Graphics adapter I2C/DDC channel drivers
+#
 # CONFIG_I2C_VOODOO3 is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
 # CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
 
 #
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
+# CONFIG_AT24 is not set
 # CONFIG_SENSORS_EEPROM is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
@@ -711,10 +742,13 @@ CONFIG_I2C_DEBUG_ALGO=y
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
 # CONFIG_SPI is not set
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+# CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 # CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
 
 #
@@ -726,6 +760,7 @@ CONFIG_SSB_POSSIBLE=y
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
 
@@ -799,6 +834,7 @@ CONFIG_FB_CFB_IMAGEBLIT=y
 # CONFIG_FB_TRIDENT is not set
 # CONFIG_FB_ARK is not set
 # CONFIG_FB_PM3 is not set
+# CONFIG_FB_CARMINE is not set
 # CONFIG_FB_IBM_GXT4500 is not set
 CONFIG_FB_XILINX=y
 # CONFIG_FB_VIRTUAL is not set
@@ -831,10 +867,6 @@ CONFIG_LOGO=y
 CONFIG_LOGO_LINUX_MONO=y
 CONFIG_LOGO_LINUX_VGA16=y
 CONFIG_LOGO_LINUX_CLUT224=y
-
-#
-# Sound
-#
 # CONFIG_SOUND is not set
 # CONFIG_HID_SUPPORT is not set
 # CONFIG_USB_SUPPORT is not set
@@ -910,6 +942,7 @@ CONFIG_TMPFS=y
 CONFIG_CRAMFS=y
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
 CONFIG_ROMFS_FS=y
@@ -920,17 +953,16 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 # CONFIG_NFS_V4 is not set
+CONFIG_ROOT_NFS=y
 CONFIG_NFSD=y
 CONFIG_NFSD_V3=y
 # CONFIG_NFSD_V3_ACL is not set
 # CONFIG_NFSD_V4 is not set
-CONFIG_ROOT_NFS=y
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_EXPORTFS=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 CONFIG_SMB_FS=y
@@ -994,6 +1026,7 @@ CONFIG_BITREVERSE=y
 # CONFIG_GENERIC_FIND_FIRST_BIT is not set
 CONFIG_CRC_CCITT=y
 # CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
 # CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
@@ -1018,7 +1051,16 @@ CONFIG_FRAME_WARN=1024
 # CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
 CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_MEMORY_INIT=y
+# CONFIG_LATENCYTOP is not set
+CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+# CONFIG_FTRACE is not set
+# CONFIG_PREEMPT_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
 # CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_IRQSTACKS is not set
 # CONFIG_PPC_EARLY_DEBUG is not set
 
@@ -1071,6 +1113,10 @@ CONFIG_CRYPTO=y
 # CONFIG_CRYPTO_MD4 is not set
 # CONFIG_CRYPTO_MD5 is not set
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
 # CONFIG_CRYPTO_SHA1 is not set
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
diff --git a/arch/powerpc/configs/44x/warp_defconfig b/arch/powerpc/configs/44x/warp_defconfig
index 2313c3e8ef61..d9375a969c67 100644
--- a/arch/powerpc/configs/44x/warp_defconfig
+++ b/arch/powerpc/configs/44x/warp_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.25-rc2
-# Fri Feb 15 21:54:43 2008
+# Linux kernel version: 2.6.27-rc1
+# Tue Aug  5 09:23:39 2008
 #
 # CONFIG_PPC64 is not set
 
@@ -30,8 +30,12 @@ CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_TIME_VSYSCALL=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
+# CONFIG_HAVE_GET_USER_PAGES_FAST is not set
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
 CONFIG_GENERIC_HWEIGHT=y
@@ -79,6 +83,7 @@ CONFIG_FAIR_GROUP_SCHED=y
 CONFIG_USER_SCHED=y
 # CONFIG_CGROUP_SCHED is not set
 CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_RELAY is not set
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
@@ -87,6 +92,7 @@ CONFIG_INITRAMFS_SOURCE=""
 CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
@@ -111,13 +117,22 @@ CONFIG_SLAB=y
 # CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
+CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
+# CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+# CONFIG_HAVE_CLK is not set
 CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
@@ -128,6 +143,7 @@ CONFIG_BLOCK=y
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -142,23 +158,24 @@ CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
 CONFIG_CLASSIC_RCU=y
-# CONFIG_PREEMPT_RCU is not set
 
 #
 # Platform support
 #
-# CONFIG_PPC_MPC512x is not set
-# CONFIG_PPC_MPC5121 is not set
 # CONFIG_PPC_CELL is not set
 # CONFIG_PPC_CELL_NATIVE is not set
 # CONFIG_PQ2ADS is not set
 # CONFIG_BAMBOO is not set
 # CONFIG_EBONY is not set
+# CONFIG_SAM440EP is not set
 # CONFIG_SEQUOIA is not set
 # CONFIG_TAISHAN is not set
 # CONFIG_KATMAI is not set
 # CONFIG_RAINIER is not set
 CONFIG_WARP=y
+# CONFIG_CANYONLANDS is not set
+# CONFIG_YOSEMITE is not set
+# CONFIG_XILINX_VIRTEX440_GENERIC_BOARD is not set
 CONFIG_440EP=y
 CONFIG_IBM440EP_ERR42=y
 # CONFIG_IPIC is not set
@@ -191,7 +208,6 @@ CONFIG_HZ=1000
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
-CONFIG_RCU_TRACE=y
 CONFIG_BINFMT_ELF=y
 # CONFIG_BINFMT_MISC is not set
 # CONFIG_MATH_EMULATION is not set
@@ -209,14 +225,18 @@ CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
 # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_MIGRATION=y
 CONFIG_RESOURCES_64BIT=y
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
+CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 CONFIG_CMDLINE_BOOL=y
 CONFIG_CMDLINE="ip=on"
+CONFIG_EXTRA_TARGETS=""
 CONFIG_SECCOMP=y
 CONFIG_ISA_DMA_API=y
 
@@ -224,10 +244,13 @@ CONFIG_ISA_DMA_API=y
 # Bus options
 #
 CONFIG_ZONE_DMA=y
+CONFIG_4xx_SOC=y
+CONFIG_PPC_PCI_CHOICE=y
 # CONFIG_PCI is not set
 # CONFIG_PCI_DOMAINS is not set
 # CONFIG_PCI_SYSCALL is not set
 # CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_HAS_RAPIDIO is not set
 
 #
 # Advanced setup
@@ -237,17 +260,13 @@ CONFIG_ZONE_DMA=y
 #
 # Default settings for advanced configuration options are used
 #
-CONFIG_HIGHMEM_START=0xfe000000
 CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_PAGE_OFFSET=0xc0000000
 CONFIG_KERNEL_START=0xc0000000
+CONFIG_PHYSICAL_START=0x00000000
 CONFIG_TASK_SIZE=0xc0000000
 CONFIG_CONSISTENT_START=0xff100000
 CONFIG_CONSISTENT_SIZE=0x00200000
-CONFIG_BOOT_LOAD=0x01000000
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -291,8 +310,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_TCP_MD5SIG is not set
 # CONFIG_IP_VS is not set
 # CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
 # CONFIG_NETWORK_SECMARK is not set
 CONFIG_NETFILTER=y
 # CONFIG_NETFILTER_DEBUG is not set
@@ -318,6 +335,7 @@ CONFIG_NETFILTER_ADVANCED=y
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
 CONFIG_VLAN_8021Q=y
+# CONFIG_VLAN_8021Q_GVRP is not set
 # CONFIG_DECNET is not set
 # CONFIG_LLC2 is not set
 # CONFIG_IPX is not set
@@ -368,6 +386,7 @@ CONFIG_MTD_PARTITIONS=y
 # CONFIG_MTD_REDBOOT_PARTS is not set
 # CONFIG_MTD_CMDLINE_PARTS is not set
 CONFIG_MTD_OF_PARTS=y
+# CONFIG_MTD_AR7_PARTS is not set
 
 #
 # User Modules And Translation Layers
@@ -446,6 +465,7 @@ CONFIG_MTD_NAND_IDS=y
 #
 # CONFIG_MTD_UBI is not set
 CONFIG_OF_DEVICE=y
+CONFIG_OF_I2C=y
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_FD is not set
@@ -460,6 +480,7 @@ CONFIG_BLK_DEV_RAM_SIZE=4096
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
 # CONFIG_XILINX_SYSACE is not set
+# CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
@@ -504,11 +525,11 @@ CONFIG_SCSI_SPI_ATTRS=y
 # CONFIG_SCSI_SAS_LIBSAS is not set
 # CONFIG_SCSI_SRP_ATTRS is not set
 # CONFIG_SCSI_LOWLEVEL is not set
+# CONFIG_SCSI_DH is not set
 # CONFIG_ATA is not set
 # CONFIG_MD is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -538,6 +559,7 @@ CONFIG_IBM_NEW_EMAC_ZMII=y
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
 
 #
 # USB Network Adapters
@@ -571,6 +593,7 @@ CONFIG_IBM_NEW_EMAC_ZMII=y
 # Character devices
 #
 # CONFIG_VT is not set
+CONFIG_DEVKMEM=y
 # CONFIG_SERIAL_NONSTANDARD is not set
 
 #
@@ -608,44 +631,49 @@ CONFIG_I2C_BOARDINFO=y
 # CONFIG_I2C_CHARDEV is not set
 
 #
-# I2C Algorithms
+# I2C Hardware Bus support
 #
-# CONFIG_I2C_ALGOBIT is not set
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
 
 #
-# I2C Hardware Bus support
+# I2C system bus drivers (mostly embedded / system-on-chip)
 #
+# CONFIG_I2C_IBM_IIC is not set
 # CONFIG_I2C_MPC is not set
 # CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
 # CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
 # CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_STUB is not set
 # CONFIG_I2C_TINY_USB is not set
 
 #
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
+
+#
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
+# CONFIG_AT24 is not set
 CONFIG_SENSORS_EEPROM=y
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_TPS65010 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# SPI support
-#
 # CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+# CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 CONFIG_HWMON=y
@@ -658,6 +686,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_ADM1031 is not set
 # CONFIG_SENSORS_ADM9240 is not set
 # CONFIG_SENSORS_ADT7470 is not set
+# CONFIG_SENSORS_ADT7473 is not set
 # CONFIG_SENSORS_ATXP1 is not set
 # CONFIG_SENSORS_DS1621 is not set
 # CONFIG_SENSORS_F71805F is not set
@@ -698,6 +727,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_W83627EHF is not set
 # CONFIG_HWMON_DEBUG_CHIP is not set
 CONFIG_THERMAL=y
+# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
 
 #
@@ -709,13 +739,24 @@ CONFIG_SSB_POSSIBLE=y
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
 
 #
 # Multimedia devices
 #
+
+#
+# Multimedia core support
+#
 # CONFIG_VIDEO_DEV is not set
 # CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
 # CONFIG_DAB is not set
 
 #
@@ -730,10 +771,6 @@ CONFIG_SSB_POSSIBLE=y
 # Display device support
 #
 # CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Sound
-#
 # CONFIG_SOUND is not set
 CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
@@ -750,11 +787,15 @@ CONFIG_USB=y
 CONFIG_USB_DEVICE_CLASS=y
 # CONFIG_USB_DYNAMIC_MINORS is not set
 # CONFIG_USB_OTG is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
 
 #
 # USB Host Controller Drivers
 #
+# CONFIG_USB_C67X00_HCD is not set
 # CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
 CONFIG_USB_OHCI_HCD=y
 CONFIG_USB_OHCI_HCD_PPC_OF=y
 CONFIG_USB_OHCI_HCD_PPC_OF_BE=y
@@ -770,6 +811,7 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y
 #
 # CONFIG_USB_ACM is not set
 # CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
 
 #
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
@@ -790,6 +832,7 @@ CONFIG_USB_STORAGE=y
 # CONFIG_USB_STORAGE_JUMPSHOT is not set
 # CONFIG_USB_STORAGE_ALAUDA is not set
 # CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
 # CONFIG_USB_LIBUSUAL is not set
 
 #
@@ -825,6 +868,7 @@ CONFIG_USB_MON=y
 # CONFIG_USB_LD is not set
 # CONFIG_USB_TRANCEVIBRATOR is not set
 # CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_ISIGHTFW is not set
 # CONFIG_USB_GADGET is not set
 CONFIG_MMC=m
 # CONFIG_MMC_DEBUG is not set
@@ -836,19 +880,19 @@ CONFIG_MMC=m
 CONFIG_MMC_BLOCK=m
 CONFIG_MMC_BLOCK_BOUNCE=y
 # CONFIG_SDIO_UART is not set
+# CONFIG_MMC_TEST is not set
 
 #
 # MMC/SD Host Controller Drivers
 #
+# CONFIG_MMC_SDHCI is not set
 # CONFIG_MMC_WBSD is not set
 # CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
 # CONFIG_EDAC is not set
 # CONFIG_RTC_CLASS is not set
-
-#
-# Userspace I/O
-#
+# CONFIG_DMADEVICES is not set
 # CONFIG_UIO is not set
 
 #
@@ -863,7 +907,6 @@ CONFIG_EXT2_FS=y
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
 # CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
@@ -924,6 +967,7 @@ CONFIG_JFFS2_RTIME=y
 CONFIG_CRAMFS=y
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
 # CONFIG_ROMFS_FS is not set
@@ -934,14 +978,12 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 # CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -1001,8 +1043,10 @@ CONFIG_NLS_UTF8=y
 # Library routines
 #
 CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
 CONFIG_CRC_CCITT=y
 # CONFIG_CRC16 is not set
+CONFIG_CRC_T10DIF=y
 # CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
@@ -1013,6 +1057,7 @@ CONFIG_PLIST=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
 
 #
 # Kernel hacking
@@ -1020,6 +1065,7 @@ CONFIG_HAS_DMA=y
 # CONFIG_PRINTK_TIME is not set
 CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
 # CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_FS=y
@@ -1027,9 +1073,12 @@ CONFIG_DEBUG_FS=y
 CONFIG_DEBUG_KERNEL=y
 # CONFIG_DEBUG_SHIRQ is not set
 CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
 # CONFIG_SCHED_DEBUG is not set
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
 # CONFIG_DEBUG_SLAB is not set
 # CONFIG_DEBUG_RT_MUTEXES is not set
 # CONFIG_RT_MUTEX_TESTER is not set
@@ -1041,17 +1090,30 @@ CONFIG_DETECT_SOFTLOCKUP=y
 # CONFIG_DEBUG_BUGVERBOSE is not set
 CONFIG_DEBUG_INFO=y
 # CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+# CONFIG_FTRACE is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
 # CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
 # CONFIG_DEBUG_PAGEALLOC is not set
-# CONFIG_DEBUGGER is not set
+# CONFIG_CODE_PATCHING_SELFTEST is not set
+# CONFIG_FTR_FIXUP_SELFTEST is not set
+# CONFIG_XMON is not set
+# CONFIG_IRQSTACKS is not set
 # CONFIG_VIRQ_DEBUG is not set
 CONFIG_BDI_SWITCH=y
 # CONFIG_PPC_EARLY_DEBUG is not set
@@ -1063,48 +1125,82 @@ CONFIG_BDI_SWITCH=y
 # CONFIG_SECURITY is not set
 # CONFIG_SECURITY_FILE_CAPABILITIES is not set
 CONFIG_CRYPTO=y
-# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Crypto core or helper
+#
 # CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
 # CONFIG_CRYPTO_HMAC is not set
 # CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_NULL is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
 # CONFIG_CRYPTO_MD4 is not set
 # CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
 # CONFIG_CRYPTO_SHA1 is not set
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
 # CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_ECB is not set
-# CONFIG_CRYPTO_CBC is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_XTS is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
 # CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
 # CONFIG_CRYPTO_CAST5 is not set
 # CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
 # CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_SEED is not set
 # CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
 # CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_TEST is not set
-# CONFIG_CRYPTO_AUTHENC is not set
 # CONFIG_CRYPTO_LZO is not set
 CONFIG_CRYPTO_HW=y
 # CONFIG_PPC_CLOCK is not set
+# CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/asp8347_defconfig b/arch/powerpc/configs/83xx/asp8347_defconfig
index 60bb4d106c87..5e6780a088ce 100644
--- a/arch/powerpc/configs/asp8347_defconfig
+++ b/arch/powerpc/configs/83xx/asp8347_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.25-rc6
-# Tue May  6 02:21:00 2008
+# Linux kernel version: 2.6.27-rc4
+# Thu Aug 21 00:52:01 2008
 #
 # CONFIG_PPC64 is not set
 
@@ -16,6 +16,7 @@ CONFIG_6xx=y
 # CONFIG_E200 is not set
 CONFIG_PPC_FPU=y
 CONFIG_FSL_EMB_PERFMON=y
+# CONFIG_ALTIVEC is not set
 CONFIG_PPC_STD_MMU=y
 CONFIG_PPC_STD_MMU_32=y
 # CONFIG_PPC_MM_SLICES is not set
@@ -31,6 +32,9 @@ CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
 CONFIG_GENERIC_HWEIGHT=y
@@ -50,6 +54,9 @@ CONFIG_AUDIT_ARCH=y
 CONFIG_GENERIC_BUG=y
 # CONFIG_DEFAULT_UIMAGE is not set
 CONFIG_REDBOOT=y
+CONFIG_HIBERNATE_32=y
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
@@ -92,6 +99,7 @@ CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
+CONFIG_PCSPKR_PLATFORM=y
 CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
@@ -109,24 +117,33 @@ CONFIG_SLUB=y
 # CONFIG_PROFILING is not set
 # CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
+CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
+# CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+# CONFIG_HAVE_CLK is not set
 CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-# CONFIG_KMOD is not set
+CONFIG_KMOD=y
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -145,38 +162,49 @@ CONFIG_CLASSIC_RCU=y
 #
 # Platform support
 #
-# CONFIG_PPC_MULTIPLATFORM is not set
-# CONFIG_PPC_82xx is not set
-CONFIG_PPC_83xx=y
-# CONFIG_PPC_86xx is not set
-# CONFIG_PPC_MPC512x is not set
-# CONFIG_PPC_MPC5121 is not set
+CONFIG_PPC_MULTIPLATFORM=y
+CONFIG_CLASSIC32=y
+CONFIG_PPC_CHRP=y
+# CONFIG_MPC5121_ADS is not set
+# CONFIG_MPC5121_GENERIC is not set
+# CONFIG_PPC_MPC52xx is not set
+CONFIG_PPC_PMAC=y
 # CONFIG_PPC_CELL is not set
 # CONFIG_PPC_CELL_NATIVE is not set
+# CONFIG_PPC_82xx is not set
 # CONFIG_PQ2ADS is not set
-CONFIG_MPC83xx=y
+CONFIG_PPC_83xx=y
 # CONFIG_MPC831x_RDB is not set
 # CONFIG_MPC832x_MDS is not set
 # CONFIG_MPC832x_RDB is not set
 # CONFIG_MPC834x_MDS is not set
 # CONFIG_MPC834x_ITX is not set
 # CONFIG_MPC836x_MDS is not set
+# CONFIG_MPC836x_RDK is not set
 # CONFIG_MPC837x_MDS is not set
 # CONFIG_MPC837x_RDB is not set
 # CONFIG_SBC834x is not set
 CONFIG_ASP834x=y
 CONFIG_PPC_MPC834x=y
+# CONFIG_PPC_86xx is not set
+# CONFIG_EMBEDDED6xx is not set
+CONFIG_PPC_NATIVE=y
+# CONFIG_UDBG_RTAS_CONSOLE is not set
 CONFIG_IPIC=y
-# CONFIG_MPIC is not set
+CONFIG_MPIC=y
 # CONFIG_MPIC_WEIRD is not set
-# CONFIG_PPC_I8259 is not set
-# CONFIG_PPC_RTAS is not set
+CONFIG_PPC_I8259=y
+CONFIG_PPC_RTAS=y
+# CONFIG_RTAS_ERROR_LOGGING is not set
+CONFIG_RTAS_PROC=y
 # CONFIG_MMIO_NVRAM is not set
-# CONFIG_PPC_MPC106 is not set
+CONFIG_PPC_MPC106=y
 # CONFIG_PPC_970_NAP is not set
 # CONFIG_PPC_INDIRECT_IO is not set
 # CONFIG_GENERIC_IOMAP is not set
 # CONFIG_CPU_FREQ is not set
+# CONFIG_PPC601_SYNC_FIX is not set
+# CONFIG_TAU is not set
 # CONFIG_FSL_ULI1575 is not set
 
 #
@@ -192,7 +220,7 @@ CONFIG_HZ_250=y
 # CONFIG_HZ_300 is not set
 # CONFIG_HZ_1000 is not set
 CONFIG_HZ=250
-# CONFIG_SCHED_HRTICK is not set
+CONFIG_SCHED_HRTICK=y
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
@@ -202,6 +230,7 @@ CONFIG_BINFMT_ELF=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_HAS_WALK_MEMORY=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+# CONFIG_KEXEC is not set
 CONFIG_ARCH_FLATMEM_ENABLE=y
 CONFIG_ARCH_POPULATES_NODE_MAP=y
 CONFIG_SELECT_MEMORY_MODEL=y
@@ -212,13 +241,17 @@ CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
 # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_MIGRATION=y
 # CONFIG_RESOURCES_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
+CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
+CONFIG_EXTRA_TARGETS=""
 # CONFIG_PM is not set
 CONFIG_SECCOMP=y
 CONFIG_ISA_DMA_API=y
@@ -226,10 +259,13 @@ CONFIG_ISA_DMA_API=y
 #
 # Bus options
 #
+# CONFIG_ISA is not set
 CONFIG_ZONE_DMA=y
 CONFIG_GENERIC_ISA_DMA=y
 CONFIG_PPC_INDIRECT_PCI=y
 CONFIG_FSL_SOC=y
+CONFIG_FSL_PCI=y
+CONFIG_PPC_PCI_CHOICE=y
 CONFIG_PCI=y
 CONFIG_PCI_DOMAINS=y
 CONFIG_PCI_SYSCALL=y
@@ -239,6 +275,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y
 CONFIG_PCI_LEGACY=y
 # CONFIG_PCCARD is not set
 # CONFIG_HOTPLUG_PCI is not set
+# CONFIG_HAS_RAPIDIO is not set
 
 #
 # Advanced setup
@@ -248,15 +285,11 @@ CONFIG_PCI_LEGACY=y
 #
 # Default settings for advanced configuration options are used
 #
-CONFIG_HIGHMEM_START=0xfe000000
 CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_PAGE_OFFSET=0xc0000000
 CONFIG_KERNEL_START=0xc0000000
+CONFIG_PHYSICAL_START=0x00000000
 CONFIG_TASK_SIZE=0xc0000000
-CONFIG_BOOT_LOAD=0x00800000
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -300,8 +333,6 @@ CONFIG_TCP_CONG_CUBIC=y
 CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
 # CONFIG_NETWORK_SECMARK is not set
 # CONFIG_NETFILTER is not set
 # CONFIG_IP_DCCP is not set
@@ -363,6 +394,7 @@ CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED=y
 # CONFIG_MTD_REDBOOT_PARTS_READONLY is not set
 # CONFIG_MTD_CMDLINE_PARTS is not set
 CONFIG_MTD_OF_PARTS=y
+# CONFIG_MTD_AR7_PARTS is not set
 
 #
 # User Modules And Translation Layers
@@ -434,9 +466,11 @@ CONFIG_MTD_PHYSMAP_OF=y
 #
 # CONFIG_MTD_UBI is not set
 CONFIG_OF_DEVICE=y
+CONFIG_OF_I2C=y
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_FD is not set
+# CONFIG_MAC_FLOPPY is not set
 # CONFIG_BLK_CPQ_DA is not set
 # CONFIG_BLK_CPQ_CISS_DA is not set
 # CONFIG_BLK_DEV_DAC960 is not set
@@ -453,12 +487,14 @@ CONFIG_BLK_DEV_RAM_SIZE=32768
 # CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_PHANTOM is not set
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_HP_ILO is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -476,12 +512,15 @@ CONFIG_HAVE_IDE=y
 #
 # IEEE 1394 (FireWire) support
 #
+
+#
+# Enable only one of the two stacks, unless you know what you are doing
+#
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -508,6 +547,8 @@ CONFIG_PHYLIB=y
 # CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
+# CONFIG_MACE is not set
+# CONFIG_BMAC is not set
 # CONFIG_HAPPYMEAL is not set
 # CONFIG_SUNGEM is not set
 # CONFIG_CASSINI is not set
@@ -525,7 +566,6 @@ CONFIG_NETDEV_1000=y
 # CONFIG_DL2K is not set
 # CONFIG_E1000 is not set
 # CONFIG_E1000E is not set
-# CONFIG_E1000E_ENABLED is not set
 # CONFIG_IP1000 is not set
 # CONFIG_IGB is not set
 # CONFIG_NS83820 is not set
@@ -535,14 +575,14 @@ CONFIG_NETDEV_1000=y
 # CONFIG_SIS190 is not set
 # CONFIG_SKGE is not set
 # CONFIG_SKY2 is not set
-# CONFIG_SK98LIN is not set
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
 CONFIG_GIANFAR=y
-# CONFIG_GFAR_NAPI is not set
+# CONFIG_MV643XX_ETH is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
+# CONFIG_ATL1E is not set
 # CONFIG_NETDEV_10000 is not set
 # CONFIG_TR is not set
 
@@ -551,6 +591,7 @@ CONFIG_GIANFAR=y
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
 
 #
 # USB Network Adapters
@@ -606,6 +647,7 @@ CONFIG_INPUT=y
 # Character devices
 #
 # CONFIG_VT is not set
+CONFIG_DEVKMEM=y
 # CONFIG_SERIAL_NONSTANDARD is not set
 # CONFIG_NOZOMI is not set
 
@@ -625,16 +667,17 @@ CONFIG_SERIAL_8250_RUNTIME_UARTS=4
 # CONFIG_SERIAL_UARTLITE is not set
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_PMACZILOG is not set
 # CONFIG_SERIAL_JSM is not set
 # CONFIG_SERIAL_OF_PLATFORM is not set
 CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_BRIQ_PANEL is not set
+# CONFIG_HVC_RTAS is not set
 # CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
 # CONFIG_NVRAM is not set
-CONFIG_GEN_RTC=y
-# CONFIG_GEN_RTC_X is not set
 # CONFIG_R3964 is not set
 # CONFIG_APPLICOM is not set
 # CONFIG_RAW_DRIVER is not set
@@ -643,16 +686,14 @@ CONFIG_DEVPORT=y
 CONFIG_I2C=y
 CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
 
 #
-# I2C Algorithms
+# I2C Hardware Bus support
 #
-# CONFIG_I2C_ALGOBIT is not set
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
 
 #
-# I2C Hardware Bus support
+# PC SMBus host controller drivers
 #
 # CONFIG_I2C_ALI1535 is not set
 # CONFIG_I2C_ALI1563 is not set
@@ -660,50 +701,70 @@ CONFIG_I2C_CHARDEV=y
 # CONFIG_I2C_AMD756 is not set
 # CONFIG_I2C_AMD8111 is not set
 # CONFIG_I2C_I801 is not set
-# CONFIG_I2C_I810 is not set
+# CONFIG_I2C_ISCH is not set
 # CONFIG_I2C_PIIX4 is not set
-CONFIG_I2C_MPC=y
 # CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_PROSAVAGE is not set
-# CONFIG_I2C_SAVAGE4 is not set
-# CONFIG_I2C_SIMTEC is not set
 # CONFIG_I2C_SIS5595 is not set
 # CONFIG_I2C_SIS630 is not set
 # CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_TINY_USB is not set
 # CONFIG_I2C_VIA is not set
 # CONFIG_I2C_VIAPRO is not set
+
+#
+# Mac SMBus host controller drivers
+#
+# CONFIG_I2C_HYDRA is not set
+CONFIG_I2C_POWERMAC=y
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+CONFIG_I2C_MPC=y
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Graphics adapter I2C/DDC channel drivers
+#
 # CONFIG_I2C_VOODOO3 is not set
 
 #
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
+
+#
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
+# CONFIG_AT24 is not set
 # CONFIG_SENSORS_EEPROM is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_TPS65010 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# SPI support
-#
 # CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+# CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 CONFIG_HWMON=y
 # CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_AD7414 is not set
 # CONFIG_SENSORS_AD7418 is not set
 # CONFIG_SENSORS_ADM1021 is not set
 # CONFIG_SENSORS_ADM1025 is not set
@@ -713,6 +774,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_ADM9240 is not set
 # CONFIG_SENSORS_ADT7470 is not set
 # CONFIG_SENSORS_ADT7473 is not set
+# CONFIG_SENSORS_AMS is not set
 # CONFIG_SENSORS_ATXP1 is not set
 # CONFIG_SENSORS_DS1621 is not set
 # CONFIG_SENSORS_I5K_AMB is not set
@@ -757,6 +819,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_W83627EHF is not set
 # CONFIG_HWMON_DEBUG_CHIP is not set
 CONFIG_THERMAL=y
+# CONFIG_THERMAL_HWMON is not set
 CONFIG_WATCHDOG=y
 # CONFIG_WATCHDOG_NOWAYOUT is not set
 
@@ -764,7 +827,9 @@ CONFIG_WATCHDOG=y
 # Watchdog Device Drivers
 #
 # CONFIG_SOFT_WATCHDOG is not set
-CONFIG_83xx_WDT=y
+# CONFIG_ALIM7101_WDT is not set
+# CONFIG_8xxx_WDT is not set
+# CONFIG_WATCHDOG_RTAS is not set
 
 #
 # PCI-based Watchdog Cards
@@ -786,13 +851,25 @@ CONFIG_SSB_POSSIBLE=y
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
 
 #
 # Multimedia devices
 #
+
+#
+# Multimedia core support
+#
 # CONFIG_VIDEO_DEV is not set
 # CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
 CONFIG_DAB=y
 # CONFIG_USB_DABUSB is not set
 
@@ -810,10 +887,6 @@ CONFIG_VIDEO_OUTPUT_CONTROL=m
 # Display device support
 #
 # CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Sound
-#
 # CONFIG_SOUND is not set
 # CONFIG_HID_SUPPORT is not set
 CONFIG_USB_SUPPORT=y
@@ -831,16 +904,21 @@ CONFIG_USB=y
 CONFIG_USB_DEVICE_CLASS=y
 # CONFIG_USB_DYNAMIC_MINORS is not set
 # CONFIG_USB_OTG is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+CONFIG_USB_MON=y
 
 #
 # USB Host Controller Drivers
 #
+# CONFIG_USB_C67X00_HCD is not set
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_EHCI_ROOT_HUB_TT=y
 # CONFIG_USB_EHCI_TT_NEWSCHED is not set
 CONFIG_USB_EHCI_FSL=y
 CONFIG_USB_EHCI_HCD_PPC_OF=y
 # CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
 # CONFIG_USB_OHCI_HCD is not set
 # CONFIG_USB_UHCI_HCD is not set
 # CONFIG_USB_SL811_HCD is not set
@@ -851,6 +929,7 @@ CONFIG_USB_EHCI_HCD_PPC_OF=y
 #
 # CONFIG_USB_ACM is not set
 # CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
 
 #
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
@@ -865,7 +944,6 @@ CONFIG_USB_EHCI_HCD_PPC_OF=y
 # USB Imaging devices
 #
 # CONFIG_USB_MDC800 is not set
-CONFIG_USB_MON=y
 
 #
 # USB port drivers
@@ -878,7 +956,6 @@ CONFIG_USB_MON=y
 # CONFIG_USB_EMI62 is not set
 # CONFIG_USB_EMI26 is not set
 # CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_AUERSWALD is not set
 # CONFIG_USB_RIO500 is not set
 # CONFIG_USB_LEGOTOWER is not set
 # CONFIG_USB_LCD is not set
@@ -894,18 +971,16 @@ CONFIG_USB_MON=y
 # CONFIG_USB_LD is not set
 # CONFIG_USB_TRANCEVIBRATOR is not set
 # CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_ISIGHTFW is not set
 # CONFIG_USB_GADGET is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
 # CONFIG_INFINIBAND is not set
 # CONFIG_EDAC is not set
 CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
-
-#
-# Conflicting RTC option has been selected, check GEN_RTC and RTC
-#
 CONFIG_RTC_HCTOSYS=y
 CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
 # CONFIG_RTC_DEBUG is not set
@@ -933,6 +1008,7 @@ CONFIG_RTC_DRV_DS1374=y
 # CONFIG_RTC_DRV_PCF8583 is not set
 # CONFIG_RTC_DRV_M41T80 is not set
 # CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
 
 #
 # SPI RTC drivers
@@ -953,11 +1029,8 @@ CONFIG_RTC_DRV_DS1374=y
 #
 # on-CPU RTC drivers
 #
+# CONFIG_RTC_DRV_PPC is not set
 # CONFIG_DMADEVICES is not set
-
-#
-# Userspace I/O
-#
 # CONFIG_UIO is not set
 
 #
@@ -977,7 +1050,6 @@ CONFIG_FS_MBCACHE=y
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
 # CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
@@ -1036,6 +1108,7 @@ CONFIG_JFFS2_RTIME=y
 # CONFIG_CRAMFS is not set
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
 # CONFIG_ROMFS_FS is not set
@@ -1046,15 +1119,13 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_BIND34 is not set
 CONFIG_RPCSEC_GSS_KRB5=y
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -1126,8 +1197,10 @@ CONFIG_NLS_DEFAULT="iso8859-1"
 # Library routines
 #
 CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
 # CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
@@ -1146,6 +1219,7 @@ CONFIG_HAVE_LMB=y
 # CONFIG_PRINTK_TIME is not set
 CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
 # CONFIG_MAGIC_SYSRQ is not set
 # CONFIG_UNUSED_SYMBOLS is not set
 # CONFIG_DEBUG_FS is not set
@@ -1154,7 +1228,18 @@ CONFIG_ENABLE_MUST_CHECK=y
 # CONFIG_SLUB_DEBUG_ON is not set
 # CONFIG_SLUB_STATS is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_LATENCYTOP is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
+CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+# CONFIG_FTRACE is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
 # CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_IRQSTACKS is not set
+# CONFIG_BOOTX_TEXT is not set
 # CONFIG_PPC_EARLY_DEBUG is not set
 
 #
@@ -1164,51 +1249,86 @@ CONFIG_ENABLE_MUST_CHECK=y
 # CONFIG_SECURITY is not set
 # CONFIG_SECURITY_FILE_CAPABILITIES is not set
 CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
 CONFIG_CRYPTO_ALGAPI=y
 CONFIG_CRYPTO_BLKCIPHER=y
-# CONFIG_CRYPTO_SEQIV is not set
 CONFIG_CRYPTO_MANAGER=y
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=m
+# CONFIG_CRYPTO_LRW is not set
+CONFIG_CRYPTO_PCBC=m
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
 # CONFIG_CRYPTO_HMAC is not set
 # CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_NULL is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
 # CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
 # CONFIG_CRYPTO_SHA1 is not set
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
 # CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-CONFIG_CRYPTO_ECB=m
-CONFIG_CRYPTO_CBC=y
-CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_XTS is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
 # CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
 # CONFIG_CRYPTO_CAST5 is not set
 # CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
 # CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_SEED is not set
 # CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
 # CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_TEST is not set
-# CONFIG_CRYPTO_AUTHENC is not set
 # CONFIG_CRYPTO_LZO is not set
 CONFIG_CRYPTO_HW=y
 # CONFIG_CRYPTO_DEV_HIFN_795X is not set
+# CONFIG_CRYPTO_DEV_TALITOS is not set
 # CONFIG_PPC_CLOCK is not set
+# CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/83xx/mpc8313_rdb_defconfig b/arch/powerpc/configs/83xx/mpc8313_rdb_defconfig
index 5428f9f5ed85..2028337868b4 100644
--- a/arch/powerpc/configs/83xx/mpc8313_rdb_defconfig
+++ b/arch/powerpc/configs/83xx/mpc8313_rdb_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc5
-# Mon Jun  9 08:52:21 2008
+# Linux kernel version: 2.6.27-rc4
+# Thu Aug 21 00:52:17 2008
 #
 # CONFIG_PPC64 is not set
 
@@ -16,6 +16,7 @@ CONFIG_6xx=y
 # CONFIG_E200 is not set
 CONFIG_PPC_FPU=y
 # CONFIG_FSL_EMB_PERFMON is not set
+# CONFIG_ALTIVEC is not set
 CONFIG_PPC_STD_MMU=y
 CONFIG_PPC_STD_MMU_32=y
 # CONFIG_PPC_MM_SLICES is not set
@@ -32,6 +33,7 @@ CONFIG_GENERIC_HARDIRQS=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
@@ -51,6 +53,9 @@ CONFIG_PPC_UDBG_16550=y
 CONFIG_AUDIT_ARCH=y
 CONFIG_GENERIC_BUG=y
 CONFIG_DEFAULT_UIMAGE=y
+CONFIG_HIBERNATE_32=y
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
@@ -88,12 +93,12 @@ CONFIG_INITRAMFS_SOURCE=""
 CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
 # CONFIG_KALLSYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
+CONFIG_PCSPKR_PLATFORM=y
 CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
@@ -111,10 +116,16 @@ CONFIG_SLUB=y
 # CONFIG_PROFILING is not set
 # CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
+CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
 # CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+# CONFIG_HAVE_CLK is not set
 CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
@@ -125,12 +136,13 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-# CONFIG_KMOD is not set
+CONFIG_KMOD=y
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -149,37 +161,49 @@ CONFIG_CLASSIC_RCU=y
 #
 # Platform support
 #
-# CONFIG_PPC_MULTIPLATFORM is not set
-# CONFIG_PPC_82xx is not set
-CONFIG_PPC_83xx=y
-# CONFIG_PPC_86xx is not set
-# CONFIG_PPC_MPC512x is not set
-# CONFIG_PPC_MPC5121 is not set
+CONFIG_PPC_MULTIPLATFORM=y
+CONFIG_CLASSIC32=y
+CONFIG_PPC_CHRP=y
+# CONFIG_MPC5121_ADS is not set
+# CONFIG_MPC5121_GENERIC is not set
+# CONFIG_PPC_MPC52xx is not set
+CONFIG_PPC_PMAC=y
 # CONFIG_PPC_CELL is not set
 # CONFIG_PPC_CELL_NATIVE is not set
+# CONFIG_PPC_82xx is not set
 # CONFIG_PQ2ADS is not set
-CONFIG_MPC83xx=y
+CONFIG_PPC_83xx=y
 CONFIG_MPC831x_RDB=y
 # CONFIG_MPC832x_MDS is not set
 # CONFIG_MPC832x_RDB is not set
 # CONFIG_MPC834x_MDS is not set
 # CONFIG_MPC834x_ITX is not set
 # CONFIG_MPC836x_MDS is not set
+# CONFIG_MPC836x_RDK is not set
 # CONFIG_MPC837x_MDS is not set
 # CONFIG_MPC837x_RDB is not set
 # CONFIG_SBC834x is not set
+# CONFIG_ASP834x is not set
 CONFIG_PPC_MPC831x=y
+# CONFIG_PPC_86xx is not set
+# CONFIG_EMBEDDED6xx is not set
+CONFIG_PPC_NATIVE=y
+# CONFIG_UDBG_RTAS_CONSOLE is not set
 CONFIG_IPIC=y
-# CONFIG_MPIC is not set
+CONFIG_MPIC=y
 # CONFIG_MPIC_WEIRD is not set
-# CONFIG_PPC_I8259 is not set
-# CONFIG_PPC_RTAS is not set
+CONFIG_PPC_I8259=y
+CONFIG_PPC_RTAS=y
+# CONFIG_RTAS_ERROR_LOGGING is not set
+CONFIG_RTAS_PROC=y
 # CONFIG_MMIO_NVRAM is not set
-# CONFIG_PPC_MPC106 is not set
+CONFIG_PPC_MPC106=y
 # CONFIG_PPC_970_NAP is not set
 # CONFIG_PPC_INDIRECT_IO is not set
 # CONFIG_GENERIC_IOMAP is not set
 # CONFIG_CPU_FREQ is not set
+# CONFIG_PPC601_SYNC_FIX is not set
+# CONFIG_TAU is not set
 # CONFIG_FSL_ULI1575 is not set
 
 #
@@ -195,7 +219,7 @@ CONFIG_HZ_250=y
 # CONFIG_HZ_300 is not set
 # CONFIG_HZ_1000 is not set
 CONFIG_HZ=250
-# CONFIG_SCHED_HRTICK is not set
+CONFIG_SCHED_HRTICK=y
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
@@ -205,6 +229,7 @@ CONFIG_BINFMT_ELF=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_HAS_WALK_MEMORY=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+# CONFIG_KEXEC is not set
 CONFIG_ARCH_FLATMEM_ENABLE=y
 CONFIG_ARCH_POPULATES_NODE_MAP=y
 CONFIG_SELECT_MEMORY_MODEL=y
@@ -217,6 +242,7 @@ CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_MIGRATION=y
 # CONFIG_RESOURCES_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
@@ -224,6 +250,7 @@ CONFIG_VIRT_TO_BUS=y
 CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
+CONFIG_EXTRA_TARGETS=""
 # CONFIG_PM is not set
 CONFIG_SECCOMP=y
 CONFIG_ISA_DMA_API=y
@@ -231,10 +258,13 @@ CONFIG_ISA_DMA_API=y
 #
 # Bus options
 #
+# CONFIG_ISA is not set
 CONFIG_ZONE_DMA=y
 CONFIG_GENERIC_ISA_DMA=y
 CONFIG_PPC_INDIRECT_PCI=y
 CONFIG_FSL_SOC=y
+CONFIG_FSL_PCI=y
+CONFIG_PPC_PCI_CHOICE=y
 CONFIG_PCI=y
 CONFIG_PCI_DOMAINS=y
 CONFIG_PCI_SYSCALL=y
@@ -260,10 +290,6 @@ CONFIG_PAGE_OFFSET=0xc0000000
 CONFIG_KERNEL_START=0xc0000000
 CONFIG_PHYSICAL_START=0x00000000
 CONFIG_TASK_SIZE=0xc0000000
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -452,9 +478,11 @@ CONFIG_MTD_NAND_FSL_ELBC=y
 # CONFIG_MTD_UBI is not set
 CONFIG_OF_DEVICE=y
 CONFIG_OF_I2C=y
+CONFIG_OF_SPI=y
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_FD is not set
+# CONFIG_MAC_FLOPPY is not set
 # CONFIG_BLK_CPQ_DA is not set
 # CONFIG_BLK_CPQ_CISS_DA is not set
 # CONFIG_BLK_DEV_DAC960 is not set
@@ -471,12 +499,14 @@ CONFIG_BLK_DEV_RAM_SIZE=32768
 # CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_PHANTOM is not set
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_HP_ILO is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -553,7 +583,10 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_DC390T is not set
 # CONFIG_SCSI_NSP32 is not set
 # CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_MESH is not set
+# CONFIG_SCSI_MAC53C94 is not set
 # CONFIG_SCSI_SRP is not set
+# CONFIG_SCSI_DH is not set
 # CONFIG_ATA is not set
 CONFIG_MD=y
 CONFIG_BLK_DEV_MD=y
@@ -570,12 +603,15 @@ CONFIG_MD_RAID1=y
 #
 # IEEE 1394 (FireWire) support
 #
+
+#
+# Enable only one of the two stacks, unless you know what you are doing
+#
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -602,6 +638,8 @@ CONFIG_CICADA_PHY=y
 # CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
+# CONFIG_MACE is not set
+# CONFIG_BMAC is not set
 # CONFIG_HAPPYMEAL is not set
 # CONFIG_SUNGEM is not set
 # CONFIG_CASSINI is not set
@@ -638,7 +676,6 @@ CONFIG_NETDEV_1000=y
 # CONFIG_DL2K is not set
 # CONFIG_E1000 is not set
 # CONFIG_E1000E is not set
-# CONFIG_E1000E_ENABLED is not set
 # CONFIG_IP1000 is not set
 # CONFIG_IGB is not set
 # CONFIG_NS83820 is not set
@@ -652,9 +689,10 @@ CONFIG_NETDEV_1000=y
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
 CONFIG_GIANFAR=y
-CONFIG_GFAR_NAPI=y
+# CONFIG_MV643XX_ETH is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
+# CONFIG_ATL1E is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
 # CONFIG_CHELSIO_T3 is not set
@@ -752,11 +790,14 @@ CONFIG_SERIAL_8250_RUNTIME_UARTS=4
 # CONFIG_SERIAL_UARTLITE is not set
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_PMACZILOG is not set
 # CONFIG_SERIAL_JSM is not set
 # CONFIG_SERIAL_OF_PLATFORM is not set
 CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_BRIQ_PANEL is not set
+# CONFIG_HVC_RTAS is not set
 # CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
 # CONFIG_NVRAM is not set
@@ -768,43 +809,70 @@ CONFIG_DEVPORT=y
 CONFIG_I2C=y
 CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
 
 #
 # I2C Hardware Bus support
 #
+
+#
+# PC SMBus host controller drivers
+#
 # CONFIG_I2C_ALI1535 is not set
 # CONFIG_I2C_ALI1563 is not set
 # CONFIG_I2C_ALI15X3 is not set
 # CONFIG_I2C_AMD756 is not set
 # CONFIG_I2C_AMD8111 is not set
 # CONFIG_I2C_I801 is not set
-# CONFIG_I2C_I810 is not set
+# CONFIG_I2C_ISCH is not set
 # CONFIG_I2C_PIIX4 is not set
-CONFIG_I2C_MPC=y
 # CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_PROSAVAGE is not set
-# CONFIG_I2C_SAVAGE4 is not set
-# CONFIG_I2C_SIMTEC is not set
 # CONFIG_I2C_SIS5595 is not set
 # CONFIG_I2C_SIS630 is not set
 # CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_TINY_USB is not set
 # CONFIG_I2C_VIA is not set
 # CONFIG_I2C_VIAPRO is not set
+
+#
+# Mac SMBus host controller drivers
+#
+# CONFIG_I2C_HYDRA is not set
+CONFIG_I2C_POWERMAC=y
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+CONFIG_I2C_MPC=y
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Graphics adapter I2C/DDC channel drivers
+#
 # CONFIG_I2C_VOODOO3 is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
 # CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
 
 #
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
+# CONFIG_AT24 is not set
 # CONFIG_SENSORS_EEPROM is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
@@ -828,11 +896,15 @@ CONFIG_SPI_MPC83xx=y
 # CONFIG_SPI_AT25 is not set
 # CONFIG_SPI_SPIDEV is not set
 # CONFIG_SPI_TLE62X0 is not set
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+# CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 CONFIG_HWMON=y
 # CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_AD7414 is not set
 # CONFIG_SENSORS_AD7418 is not set
+# CONFIG_SENSORS_ADCXX is not set
 # CONFIG_SENSORS_ADM1021 is not set
 # CONFIG_SENSORS_ADM1025 is not set
 # CONFIG_SENSORS_ADM1026 is not set
@@ -841,6 +913,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_ADM9240 is not set
 # CONFIG_SENSORS_ADT7470 is not set
 # CONFIG_SENSORS_ADT7473 is not set
+# CONFIG_SENSORS_AMS is not set
 # CONFIG_SENSORS_ATXP1 is not set
 # CONFIG_SENSORS_DS1621 is not set
 # CONFIG_SENSORS_I5K_AMB is not set
@@ -886,6 +959,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_W83627EHF is not set
 # CONFIG_HWMON_DEBUG_CHIP is not set
 # CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
 CONFIG_WATCHDOG=y
 # CONFIG_WATCHDOG_NOWAYOUT is not set
 
@@ -893,7 +967,9 @@ CONFIG_WATCHDOG=y
 # Watchdog Device Drivers
 #
 # CONFIG_SOFT_WATCHDOG is not set
-CONFIG_83xx_WDT=y
+# CONFIG_ALIM7101_WDT is not set
+# CONFIG_8xxx_WDT is not set
+# CONFIG_WATCHDOG_RTAS is not set
 
 #
 # PCI-based Watchdog Cards
@@ -915,8 +991,10 @@ CONFIG_SSB_POSSIBLE=y
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
 
 #
 # Multimedia devices
@@ -949,10 +1027,6 @@ CONFIG_VIDEO_OUTPUT_CONTROL=m
 # Display device support
 #
 # CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Sound
-#
 # CONFIG_SOUND is not set
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
@@ -986,6 +1060,7 @@ CONFIG_USB_DEVICE_CLASS=y
 # CONFIG_USB_OTG is not set
 # CONFIG_USB_OTG_WHITELIST is not set
 # CONFIG_USB_OTG_BLACKLIST_HUB is not set
+CONFIG_USB_MON=y
 
 #
 # USB Host Controller Drivers
@@ -1009,6 +1084,7 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y
 CONFIG_USB_UHCI_HCD=y
 # CONFIG_USB_SL811_HCD is not set
 # CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_GADGET_MUSB_HDRC is not set
 
 #
 # USB Device Class drivers
@@ -1037,6 +1113,7 @@ CONFIG_USB_STORAGE=y
 # CONFIG_USB_STORAGE_ALAUDA is not set
 # CONFIG_USB_STORAGE_ONETOUCH is not set
 # CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_SIERRA is not set
 # CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
 # CONFIG_USB_LIBUSUAL is not set
 
@@ -1045,7 +1122,6 @@ CONFIG_USB_STORAGE=y
 #
 # CONFIG_USB_MDC800 is not set
 # CONFIG_USB_MICROTEK is not set
-CONFIG_USB_MON=y
 
 #
 # USB port drivers
@@ -1058,7 +1134,6 @@ CONFIG_USB_MON=y
 # CONFIG_USB_EMI62 is not set
 # CONFIG_USB_EMI26 is not set
 # CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_AUERSWALD is not set
 # CONFIG_USB_RIO500 is not set
 # CONFIG_USB_LEGOTOWER is not set
 # CONFIG_USB_LCD is not set
@@ -1085,7 +1160,7 @@ CONFIG_USB_GADGET_SELECTED=y
 # CONFIG_USB_GADGET_FSL_USB2 is not set
 CONFIG_USB_GADGET_NET2280=y
 CONFIG_USB_NET2280=y
-# CONFIG_USB_GADGET_PXA2XX is not set
+# CONFIG_USB_GADGET_PXA25X is not set
 # CONFIG_USB_GADGET_M66592 is not set
 # CONFIG_USB_GADGET_PXA27X is not set
 # CONFIG_USB_GADGET_GOKU is not set
@@ -1103,6 +1178,7 @@ CONFIG_USB_ETH_RNDIS=y
 # CONFIG_USB_G_SERIAL is not set
 # CONFIG_USB_MIDI_GADGET is not set
 # CONFIG_USB_G_PRINTER is not set
+# CONFIG_USB_CDC_COMPOSITE is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
@@ -1138,10 +1214,13 @@ CONFIG_RTC_DRV_DS1307=y
 # CONFIG_RTC_DRV_PCF8583 is not set
 # CONFIG_RTC_DRV_M41T80 is not set
 # CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
 
 #
 # SPI RTC drivers
 #
+# CONFIG_RTC_DRV_M41T94 is not set
+# CONFIG_RTC_DRV_DS1305 is not set
 # CONFIG_RTC_DRV_MAX6902 is not set
 # CONFIG_RTC_DRV_R9701 is not set
 # CONFIG_RTC_DRV_RS5C348 is not set
@@ -1240,6 +1319,7 @@ CONFIG_JFFS2_RTIME=y
 # CONFIG_CRAMFS is not set
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
 # CONFIG_ROMFS_FS is not set
@@ -1250,14 +1330,13 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
-# CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_BIND34 is not set
 CONFIG_RPCSEC_GSS_KRB5=y
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -1297,6 +1376,7 @@ CONFIG_BITREVERSE=y
 # CONFIG_GENERIC_FIND_FIRST_BIT is not set
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
 # CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
@@ -1323,6 +1403,8 @@ CONFIG_FRAME_WARN=1024
 CONFIG_DEBUG_KERNEL=y
 # CONFIG_DEBUG_SHIRQ is not set
 CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
 CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
@@ -1340,19 +1422,32 @@ CONFIG_SCHED_DEBUG=y
 # CONFIG_DEBUG_INFO is not set
 # CONFIG_DEBUG_VM is not set
 # CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+# CONFIG_FTRACE is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
 # CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
 # CONFIG_DEBUG_PAGEALLOC is not set
-# CONFIG_DEBUGGER is not set
+# CONFIG_CODE_PATCHING_SELFTEST is not set
+# CONFIG_FTR_FIXUP_SELFTEST is not set
+# CONFIG_XMON is not set
 # CONFIG_IRQSTACKS is not set
 # CONFIG_BDI_SWITCH is not set
+# CONFIG_BOOTX_TEXT is not set
 # CONFIG_PPC_EARLY_DEBUG is not set
 
 #
@@ -1406,6 +1501,10 @@ CONFIG_CRYPTO_PCBC=m
 # CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=y
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
 # CONFIG_CRYPTO_SHA1 is not set
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
@@ -1438,5 +1537,6 @@ CONFIG_CRYPTO_DES=y
 # CONFIG_CRYPTO_LZO is not set
 CONFIG_CRYPTO_HW=y
 # CONFIG_CRYPTO_DEV_HIFN_795X is not set
+# CONFIG_CRYPTO_DEV_TALITOS is not set
 # CONFIG_PPC_CLOCK is not set
 # CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/83xx/mpc8315_rdb_defconfig b/arch/powerpc/configs/83xx/mpc8315_rdb_defconfig
index 9bc3a03ae264..dd80eb0a87a1 100644
--- a/arch/powerpc/configs/83xx/mpc8315_rdb_defconfig
+++ b/arch/powerpc/configs/83xx/mpc8315_rdb_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc5
-# Mon Jun  9 08:52:21 2008
+# Linux kernel version: 2.6.27-rc4
+# Thu Aug 21 00:52:18 2008
 #
 # CONFIG_PPC64 is not set
 
@@ -16,6 +16,7 @@ CONFIG_6xx=y
 # CONFIG_E200 is not set
 CONFIG_PPC_FPU=y
 # CONFIG_FSL_EMB_PERFMON is not set
+# CONFIG_ALTIVEC is not set
 CONFIG_PPC_STD_MMU=y
 CONFIG_PPC_STD_MMU_32=y
 # CONFIG_PPC_MM_SLICES is not set
@@ -32,6 +33,7 @@ CONFIG_GENERIC_HARDIRQS=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
@@ -51,6 +53,9 @@ CONFIG_PPC_UDBG_16550=y
 CONFIG_AUDIT_ARCH=y
 CONFIG_GENERIC_BUG=y
 CONFIG_DEFAULT_UIMAGE=y
+CONFIG_HIBERNATE_32=y
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
@@ -88,12 +93,12 @@ CONFIG_INITRAMFS_SOURCE=""
 CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
 # CONFIG_KALLSYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
+CONFIG_PCSPKR_PLATFORM=y
 CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
@@ -111,10 +116,16 @@ CONFIG_SLUB=y
 # CONFIG_PROFILING is not set
 # CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
+CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
 # CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+# CONFIG_HAVE_CLK is not set
 CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
@@ -125,12 +136,13 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-# CONFIG_KMOD is not set
+CONFIG_KMOD=y
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -149,37 +161,49 @@ CONFIG_CLASSIC_RCU=y
 #
 # Platform support
 #
-# CONFIG_PPC_MULTIPLATFORM is not set
-# CONFIG_PPC_82xx is not set
-CONFIG_PPC_83xx=y
-# CONFIG_PPC_86xx is not set
-# CONFIG_PPC_MPC512x is not set
-# CONFIG_PPC_MPC5121 is not set
+CONFIG_PPC_MULTIPLATFORM=y
+CONFIG_CLASSIC32=y
+CONFIG_PPC_CHRP=y
+# CONFIG_MPC5121_ADS is not set
+# CONFIG_MPC5121_GENERIC is not set
+# CONFIG_PPC_MPC52xx is not set
+CONFIG_PPC_PMAC=y
 # CONFIG_PPC_CELL is not set
 # CONFIG_PPC_CELL_NATIVE is not set
+# CONFIG_PPC_82xx is not set
 # CONFIG_PQ2ADS is not set
-CONFIG_MPC83xx=y
+CONFIG_PPC_83xx=y
 CONFIG_MPC831x_RDB=y
 # CONFIG_MPC832x_MDS is not set
 # CONFIG_MPC832x_RDB is not set
 # CONFIG_MPC834x_MDS is not set
 # CONFIG_MPC834x_ITX is not set
 # CONFIG_MPC836x_MDS is not set
+# CONFIG_MPC836x_RDK is not set
 # CONFIG_MPC837x_MDS is not set
 # CONFIG_MPC837x_RDB is not set
 # CONFIG_SBC834x is not set
+# CONFIG_ASP834x is not set
 CONFIG_PPC_MPC831x=y
+# CONFIG_PPC_86xx is not set
+# CONFIG_EMBEDDED6xx is not set
+CONFIG_PPC_NATIVE=y
+# CONFIG_UDBG_RTAS_CONSOLE is not set
 CONFIG_IPIC=y
-# CONFIG_MPIC is not set
+CONFIG_MPIC=y
 # CONFIG_MPIC_WEIRD is not set
-# CONFIG_PPC_I8259 is not set
-# CONFIG_PPC_RTAS is not set
+CONFIG_PPC_I8259=y
+CONFIG_PPC_RTAS=y
+# CONFIG_RTAS_ERROR_LOGGING is not set
+CONFIG_RTAS_PROC=y
 # CONFIG_MMIO_NVRAM is not set
-# CONFIG_PPC_MPC106 is not set
+CONFIG_PPC_MPC106=y
 # CONFIG_PPC_970_NAP is not set
 # CONFIG_PPC_INDIRECT_IO is not set
 # CONFIG_GENERIC_IOMAP is not set
 # CONFIG_CPU_FREQ is not set
+# CONFIG_PPC601_SYNC_FIX is not set
+# CONFIG_TAU is not set
 # CONFIG_FSL_ULI1575 is not set
 
 #
@@ -195,7 +219,7 @@ CONFIG_HZ_250=y
 # CONFIG_HZ_300 is not set
 # CONFIG_HZ_1000 is not set
 CONFIG_HZ=250
-# CONFIG_SCHED_HRTICK is not set
+CONFIG_SCHED_HRTICK=y
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
@@ -205,6 +229,7 @@ CONFIG_BINFMT_ELF=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_HAS_WALK_MEMORY=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+# CONFIG_KEXEC is not set
 CONFIG_ARCH_FLATMEM_ENABLE=y
 CONFIG_ARCH_POPULATES_NODE_MAP=y
 CONFIG_SELECT_MEMORY_MODEL=y
@@ -217,6 +242,7 @@ CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_MIGRATION=y
 # CONFIG_RESOURCES_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
@@ -224,6 +250,7 @@ CONFIG_VIRT_TO_BUS=y
 CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
+CONFIG_EXTRA_TARGETS=""
 # CONFIG_PM is not set
 CONFIG_SECCOMP=y
 CONFIG_ISA_DMA_API=y
@@ -231,10 +258,13 @@ CONFIG_ISA_DMA_API=y
 #
 # Bus options
 #
+# CONFIG_ISA is not set
 CONFIG_ZONE_DMA=y
 CONFIG_GENERIC_ISA_DMA=y
 CONFIG_PPC_INDIRECT_PCI=y
 CONFIG_FSL_SOC=y
+CONFIG_FSL_PCI=y
+CONFIG_PPC_PCI_CHOICE=y
 CONFIG_PCI=y
 CONFIG_PCI_DOMAINS=y
 CONFIG_PCI_SYSCALL=y
@@ -260,10 +290,6 @@ CONFIG_PAGE_OFFSET=0xc0000000
 CONFIG_KERNEL_START=0xc0000000
 CONFIG_PHYSICAL_START=0x00000000
 CONFIG_TASK_SIZE=0xc0000000
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -452,9 +478,11 @@ CONFIG_MTD_NAND_IDS=y
 # CONFIG_MTD_UBI is not set
 CONFIG_OF_DEVICE=y
 CONFIG_OF_I2C=y
+CONFIG_OF_SPI=y
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_FD is not set
+# CONFIG_MAC_FLOPPY is not set
 # CONFIG_BLK_CPQ_DA is not set
 # CONFIG_BLK_CPQ_CISS_DA is not set
 # CONFIG_BLK_DEV_DAC960 is not set
@@ -471,12 +499,14 @@ CONFIG_BLK_DEV_RAM_SIZE=32768
 # CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_PHANTOM is not set
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_HP_ILO is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -554,7 +584,10 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_DC390T is not set
 # CONFIG_SCSI_NSP32 is not set
 # CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_MESH is not set
+# CONFIG_SCSI_MAC53C94 is not set
 # CONFIG_SCSI_SRP is not set
+# CONFIG_SCSI_DH is not set
 CONFIG_ATA=y
 # CONFIG_ATA_NONSTANDARD is not set
 CONFIG_SATA_PMP=y
@@ -631,12 +664,15 @@ CONFIG_MD_RAID1=y
 #
 # IEEE 1394 (FireWire) support
 #
+
+#
+# Enable only one of the two stacks, unless you know what you are doing
+#
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -663,6 +699,8 @@ CONFIG_PHYLIB=y
 # CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
+# CONFIG_MACE is not set
+# CONFIG_BMAC is not set
 # CONFIG_HAPPYMEAL is not set
 # CONFIG_SUNGEM is not set
 # CONFIG_CASSINI is not set
@@ -699,7 +737,6 @@ CONFIG_NETDEV_1000=y
 # CONFIG_DL2K is not set
 # CONFIG_E1000 is not set
 # CONFIG_E1000E is not set
-# CONFIG_E1000E_ENABLED is not set
 # CONFIG_IP1000 is not set
 # CONFIG_IGB is not set
 # CONFIG_NS83820 is not set
@@ -713,9 +750,10 @@ CONFIG_NETDEV_1000=y
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
 CONFIG_GIANFAR=y
-CONFIG_GFAR_NAPI=y
+# CONFIG_MV643XX_ETH is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
+# CONFIG_ATL1E is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
 # CONFIG_CHELSIO_T3 is not set
@@ -813,11 +851,14 @@ CONFIG_SERIAL_8250_RUNTIME_UARTS=4
 # CONFIG_SERIAL_UARTLITE is not set
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_PMACZILOG is not set
 # CONFIG_SERIAL_JSM is not set
 # CONFIG_SERIAL_OF_PLATFORM is not set
 CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_BRIQ_PANEL is not set
+# CONFIG_HVC_RTAS is not set
 # CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
 # CONFIG_NVRAM is not set
@@ -829,43 +870,70 @@ CONFIG_DEVPORT=y
 CONFIG_I2C=y
 CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
 
 #
 # I2C Hardware Bus support
 #
+
+#
+# PC SMBus host controller drivers
+#
 # CONFIG_I2C_ALI1535 is not set
 # CONFIG_I2C_ALI1563 is not set
 # CONFIG_I2C_ALI15X3 is not set
 # CONFIG_I2C_AMD756 is not set
 # CONFIG_I2C_AMD8111 is not set
 # CONFIG_I2C_I801 is not set
-# CONFIG_I2C_I810 is not set
+# CONFIG_I2C_ISCH is not set
 # CONFIG_I2C_PIIX4 is not set
-CONFIG_I2C_MPC=y
 # CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_PROSAVAGE is not set
-# CONFIG_I2C_SAVAGE4 is not set
-# CONFIG_I2C_SIMTEC is not set
 # CONFIG_I2C_SIS5595 is not set
 # CONFIG_I2C_SIS630 is not set
 # CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_TINY_USB is not set
 # CONFIG_I2C_VIA is not set
 # CONFIG_I2C_VIAPRO is not set
+
+#
+# Mac SMBus host controller drivers
+#
+# CONFIG_I2C_HYDRA is not set
+CONFIG_I2C_POWERMAC=y
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+CONFIG_I2C_MPC=y
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Graphics adapter I2C/DDC channel drivers
+#
 # CONFIG_I2C_VOODOO3 is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
 # CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
 
 #
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
+# CONFIG_AT24 is not set
 # CONFIG_SENSORS_EEPROM is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
@@ -889,11 +957,15 @@ CONFIG_SPI_MPC83xx=y
 # CONFIG_SPI_AT25 is not set
 # CONFIG_SPI_SPIDEV is not set
 # CONFIG_SPI_TLE62X0 is not set
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+# CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 CONFIG_HWMON=y
 # CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_AD7414 is not set
 # CONFIG_SENSORS_AD7418 is not set
+# CONFIG_SENSORS_ADCXX is not set
 # CONFIG_SENSORS_ADM1021 is not set
 # CONFIG_SENSORS_ADM1025 is not set
 # CONFIG_SENSORS_ADM1026 is not set
@@ -902,6 +974,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_ADM9240 is not set
 # CONFIG_SENSORS_ADT7470 is not set
 # CONFIG_SENSORS_ADT7473 is not set
+# CONFIG_SENSORS_AMS is not set
 # CONFIG_SENSORS_ATXP1 is not set
 # CONFIG_SENSORS_DS1621 is not set
 # CONFIG_SENSORS_I5K_AMB is not set
@@ -947,6 +1020,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_W83627EHF is not set
 # CONFIG_HWMON_DEBUG_CHIP is not set
 # CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
 CONFIG_WATCHDOG=y
 # CONFIG_WATCHDOG_NOWAYOUT is not set
 
@@ -954,7 +1028,9 @@ CONFIG_WATCHDOG=y
 # Watchdog Device Drivers
 #
 # CONFIG_SOFT_WATCHDOG is not set
-CONFIG_83xx_WDT=y
+# CONFIG_ALIM7101_WDT is not set
+# CONFIG_8xxx_WDT is not set
+# CONFIG_WATCHDOG_RTAS is not set
 
 #
 # PCI-based Watchdog Cards
@@ -976,8 +1052,10 @@ CONFIG_SSB_POSSIBLE=y
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
 
 #
 # Multimedia devices
@@ -1010,10 +1088,6 @@ CONFIG_VIDEO_OUTPUT_CONTROL=m
 # Display device support
 #
 # CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Sound
-#
 # CONFIG_SOUND is not set
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
@@ -1047,6 +1121,7 @@ CONFIG_USB_DEVICE_CLASS=y
 # CONFIG_USB_OTG is not set
 # CONFIG_USB_OTG_WHITELIST is not set
 # CONFIG_USB_OTG_BLACKLIST_HUB is not set
+CONFIG_USB_MON=y
 
 #
 # USB Host Controller Drivers
@@ -1070,6 +1145,7 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y
 CONFIG_USB_UHCI_HCD=y
 # CONFIG_USB_SL811_HCD is not set
 # CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_GADGET_MUSB_HDRC is not set
 
 #
 # USB Device Class drivers
@@ -1098,6 +1174,7 @@ CONFIG_USB_STORAGE=y
 # CONFIG_USB_STORAGE_ALAUDA is not set
 # CONFIG_USB_STORAGE_ONETOUCH is not set
 # CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_SIERRA is not set
 # CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
 # CONFIG_USB_LIBUSUAL is not set
 
@@ -1106,7 +1183,6 @@ CONFIG_USB_STORAGE=y
 #
 # CONFIG_USB_MDC800 is not set
 # CONFIG_USB_MICROTEK is not set
-CONFIG_USB_MON=y
 
 #
 # USB port drivers
@@ -1119,7 +1195,6 @@ CONFIG_USB_MON=y
 # CONFIG_USB_EMI62 is not set
 # CONFIG_USB_EMI26 is not set
 # CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_AUERSWALD is not set
 # CONFIG_USB_RIO500 is not set
 # CONFIG_USB_LEGOTOWER is not set
 # CONFIG_USB_LCD is not set
@@ -1146,7 +1221,7 @@ CONFIG_USB_GADGET_SELECTED=y
 # CONFIG_USB_GADGET_FSL_USB2 is not set
 CONFIG_USB_GADGET_NET2280=y
 CONFIG_USB_NET2280=y
-# CONFIG_USB_GADGET_PXA2XX is not set
+# CONFIG_USB_GADGET_PXA25X is not set
 # CONFIG_USB_GADGET_M66592 is not set
 # CONFIG_USB_GADGET_PXA27X is not set
 # CONFIG_USB_GADGET_GOKU is not set
@@ -1164,6 +1239,7 @@ CONFIG_USB_ETH_RNDIS=y
 # CONFIG_USB_G_SERIAL is not set
 # CONFIG_USB_MIDI_GADGET is not set
 # CONFIG_USB_G_PRINTER is not set
+# CONFIG_USB_CDC_COMPOSITE is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
@@ -1199,10 +1275,13 @@ CONFIG_RTC_DRV_DS1307=y
 # CONFIG_RTC_DRV_PCF8583 is not set
 # CONFIG_RTC_DRV_M41T80 is not set
 # CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
 
 #
 # SPI RTC drivers
 #
+# CONFIG_RTC_DRV_M41T94 is not set
+# CONFIG_RTC_DRV_DS1305 is not set
 # CONFIG_RTC_DRV_MAX6902 is not set
 # CONFIG_RTC_DRV_R9701 is not set
 # CONFIG_RTC_DRV_RS5C348 is not set
@@ -1301,6 +1380,7 @@ CONFIG_JFFS2_RTIME=y
 # CONFIG_CRAMFS is not set
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
 # CONFIG_ROMFS_FS is not set
@@ -1311,14 +1391,13 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
-# CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_BIND34 is not set
 CONFIG_RPCSEC_GSS_KRB5=y
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -1358,6 +1437,7 @@ CONFIG_BITREVERSE=y
 # CONFIG_GENERIC_FIND_FIRST_BIT is not set
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
 # CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
@@ -1384,6 +1464,8 @@ CONFIG_FRAME_WARN=1024
 CONFIG_DEBUG_KERNEL=y
 # CONFIG_DEBUG_SHIRQ is not set
 CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
 CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
@@ -1401,19 +1483,32 @@ CONFIG_SCHED_DEBUG=y
 # CONFIG_DEBUG_INFO is not set
 # CONFIG_DEBUG_VM is not set
 # CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+# CONFIG_FTRACE is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
 # CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
 # CONFIG_DEBUG_PAGEALLOC is not set
-# CONFIG_DEBUGGER is not set
+# CONFIG_CODE_PATCHING_SELFTEST is not set
+# CONFIG_FTR_FIXUP_SELFTEST is not set
+# CONFIG_XMON is not set
 # CONFIG_IRQSTACKS is not set
 # CONFIG_BDI_SWITCH is not set
+# CONFIG_BOOTX_TEXT is not set
 # CONFIG_PPC_EARLY_DEBUG is not set
 
 #
@@ -1467,6 +1562,10 @@ CONFIG_CRYPTO_PCBC=m
 # CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=y
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
 # CONFIG_CRYPTO_SHA1 is not set
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
@@ -1499,5 +1598,6 @@ CONFIG_CRYPTO_DES=y
 # CONFIG_CRYPTO_LZO is not set
 CONFIG_CRYPTO_HW=y
 # CONFIG_CRYPTO_DEV_HIFN_795X is not set
+# CONFIG_CRYPTO_DEV_TALITOS is not set
 # CONFIG_PPC_CLOCK is not set
 # CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/83xx/mpc832x_mds_defconfig b/arch/powerpc/configs/83xx/mpc832x_mds_defconfig
index 1eca26f3659a..bdf50c8a17e6 100644
--- a/arch/powerpc/configs/83xx/mpc832x_mds_defconfig
+++ b/arch/powerpc/configs/83xx/mpc832x_mds_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc5
-# Mon Jun  9 08:52:22 2008
+# Linux kernel version: 2.6.27-rc4
+# Thu Aug 21 00:52:18 2008
 #
 # CONFIG_PPC64 is not set
 
@@ -16,6 +16,7 @@ CONFIG_6xx=y
 # CONFIG_E200 is not set
 CONFIG_PPC_FPU=y
 # CONFIG_FSL_EMB_PERFMON is not set
+# CONFIG_ALTIVEC is not set
 CONFIG_PPC_STD_MMU=y
 CONFIG_PPC_STD_MMU_32=y
 # CONFIG_PPC_MM_SLICES is not set
@@ -32,6 +33,7 @@ CONFIG_GENERIC_HARDIRQS=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
@@ -51,6 +53,9 @@ CONFIG_PPC_UDBG_16550=y
 CONFIG_AUDIT_ARCH=y
 CONFIG_GENERIC_BUG=y
 CONFIG_DEFAULT_UIMAGE=y
+CONFIG_HIBERNATE_32=y
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
@@ -88,12 +93,12 @@ CONFIG_INITRAMFS_SOURCE=""
 CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
 # CONFIG_KALLSYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
+CONFIG_PCSPKR_PLATFORM=y
 CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
@@ -111,10 +116,16 @@ CONFIG_SLUB=y
 # CONFIG_PROFILING is not set
 # CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
+CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
 # CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+# CONFIG_HAVE_CLK is not set
 CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
@@ -125,12 +136,13 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-# CONFIG_KMOD is not set
+CONFIG_KMOD=y
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -149,37 +161,49 @@ CONFIG_CLASSIC_RCU=y
 #
 # Platform support
 #
-# CONFIG_PPC_MULTIPLATFORM is not set
-# CONFIG_PPC_82xx is not set
-CONFIG_PPC_83xx=y
-# CONFIG_PPC_86xx is not set
-# CONFIG_PPC_MPC512x is not set
-# CONFIG_PPC_MPC5121 is not set
+CONFIG_PPC_MULTIPLATFORM=y
+CONFIG_CLASSIC32=y
+CONFIG_PPC_CHRP=y
+# CONFIG_MPC5121_ADS is not set
+# CONFIG_MPC5121_GENERIC is not set
+# CONFIG_PPC_MPC52xx is not set
+CONFIG_PPC_PMAC=y
 # CONFIG_PPC_CELL is not set
 # CONFIG_PPC_CELL_NATIVE is not set
+# CONFIG_PPC_82xx is not set
 # CONFIG_PQ2ADS is not set
-CONFIG_MPC83xx=y
+CONFIG_PPC_83xx=y
 # CONFIG_MPC831x_RDB is not set
 CONFIG_MPC832x_MDS=y
 # CONFIG_MPC832x_RDB is not set
 # CONFIG_MPC834x_MDS is not set
 # CONFIG_MPC834x_ITX is not set
 # CONFIG_MPC836x_MDS is not set
+# CONFIG_MPC836x_RDK is not set
 # CONFIG_MPC837x_MDS is not set
 # CONFIG_MPC837x_RDB is not set
 # CONFIG_SBC834x is not set
+# CONFIG_ASP834x is not set
 CONFIG_PPC_MPC832x=y
+# CONFIG_PPC_86xx is not set
+# CONFIG_EMBEDDED6xx is not set
+CONFIG_PPC_NATIVE=y
+# CONFIG_UDBG_RTAS_CONSOLE is not set
 CONFIG_IPIC=y
-# CONFIG_MPIC is not set
+CONFIG_MPIC=y
 # CONFIG_MPIC_WEIRD is not set
-# CONFIG_PPC_I8259 is not set
-# CONFIG_PPC_RTAS is not set
+CONFIG_PPC_I8259=y
+CONFIG_PPC_RTAS=y
+# CONFIG_RTAS_ERROR_LOGGING is not set
+CONFIG_RTAS_PROC=y
 # CONFIG_MMIO_NVRAM is not set
-# CONFIG_PPC_MPC106 is not set
+CONFIG_PPC_MPC106=y
 # CONFIG_PPC_970_NAP is not set
 # CONFIG_PPC_INDIRECT_IO is not set
 # CONFIG_GENERIC_IOMAP is not set
 # CONFIG_CPU_FREQ is not set
+# CONFIG_PPC601_SYNC_FIX is not set
+# CONFIG_TAU is not set
 CONFIG_QUICC_ENGINE=y
 # CONFIG_FSL_ULI1575 is not set
 
@@ -196,7 +220,7 @@ CONFIG_HZ_250=y
 # CONFIG_HZ_300 is not set
 # CONFIG_HZ_1000 is not set
 CONFIG_HZ=250
-# CONFIG_SCHED_HRTICK is not set
+CONFIG_SCHED_HRTICK=y
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
@@ -207,6 +231,7 @@ CONFIG_MATH_EMULATION=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_HAS_WALK_MEMORY=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+# CONFIG_KEXEC is not set
 CONFIG_ARCH_FLATMEM_ENABLE=y
 CONFIG_ARCH_POPULATES_NODE_MAP=y
 CONFIG_SELECT_MEMORY_MODEL=y
@@ -219,6 +244,7 @@ CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_MIGRATION=y
 # CONFIG_RESOURCES_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
@@ -226,6 +252,7 @@ CONFIG_VIRT_TO_BUS=y
 CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
+CONFIG_EXTRA_TARGETS=""
 # CONFIG_PM is not set
 CONFIG_SECCOMP=y
 CONFIG_ISA_DMA_API=y
@@ -233,10 +260,13 @@ CONFIG_ISA_DMA_API=y
 #
 # Bus options
 #
+# CONFIG_ISA is not set
 CONFIG_ZONE_DMA=y
 CONFIG_GENERIC_ISA_DMA=y
 CONFIG_PPC_INDIRECT_PCI=y
 CONFIG_FSL_SOC=y
+CONFIG_FSL_PCI=y
+CONFIG_PPC_PCI_CHOICE=y
 CONFIG_PCI=y
 CONFIG_PCI_DOMAINS=y
 CONFIG_PCI_SYSCALL=y
@@ -261,10 +291,6 @@ CONFIG_PAGE_OFFSET=0xc0000000
 CONFIG_KERNEL_START=0xc0000000
 CONFIG_PHYSICAL_START=0x00000000
 CONFIG_TASK_SIZE=0xc0000000
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -365,6 +391,7 @@ CONFIG_OF_I2C=y
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_FD is not set
+# CONFIG_MAC_FLOPPY is not set
 # CONFIG_BLK_CPQ_DA is not set
 # CONFIG_BLK_CPQ_CISS_DA is not set
 # CONFIG_BLK_DEV_DAC960 is not set
@@ -380,12 +407,14 @@ CONFIG_BLK_DEV_RAM_SIZE=32768
 # CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_PHANTOM is not set
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_HP_ILO is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -462,7 +491,10 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_DC390T is not set
 # CONFIG_SCSI_NSP32 is not set
 # CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_MESH is not set
+# CONFIG_SCSI_MAC53C94 is not set
 # CONFIG_SCSI_SRP is not set
+# CONFIG_SCSI_DH is not set
 # CONFIG_ATA is not set
 # CONFIG_MD is not set
 # CONFIG_FUSION is not set
@@ -470,12 +502,15 @@ CONFIG_SCSI_LOWLEVEL=y
 #
 # IEEE 1394 (FireWire) support
 #
+
+#
+# Enable only one of the two stacks, unless you know what you are doing
+#
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -502,6 +537,8 @@ CONFIG_DAVICOM_PHY=y
 # CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
+# CONFIG_MACE is not set
+# CONFIG_BMAC is not set
 # CONFIG_HAPPYMEAL is not set
 # CONFIG_SUNGEM is not set
 # CONFIG_CASSINI is not set
@@ -519,7 +556,6 @@ CONFIG_NETDEV_1000=y
 # CONFIG_DL2K is not set
 # CONFIG_E1000 is not set
 # CONFIG_E1000E is not set
-# CONFIG_E1000E_ENABLED is not set
 # CONFIG_IP1000 is not set
 # CONFIG_IGB is not set
 # CONFIG_NS83820 is not set
@@ -534,12 +570,13 @@ CONFIG_NETDEV_1000=y
 # CONFIG_BNX2 is not set
 # CONFIG_GIANFAR is not set
 CONFIG_UCC_GETH=y
-# CONFIG_UGETH_NAPI is not set
 # CONFIG_UGETH_MAGIC_PACKET is not set
 # CONFIG_UGETH_FILTERING is not set
 # CONFIG_UGETH_TX_ON_DEMAND is not set
+# CONFIG_MV643XX_ETH is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
+# CONFIG_ATL1E is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
 # CONFIG_CHELSIO_T3 is not set
@@ -628,12 +665,15 @@ CONFIG_SERIAL_8250_RUNTIME_UARTS=4
 # CONFIG_SERIAL_UARTLITE is not set
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_PMACZILOG is not set
 # CONFIG_SERIAL_JSM is not set
 # CONFIG_SERIAL_OF_PLATFORM is not set
 # CONFIG_SERIAL_QE is not set
 CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_BRIQ_PANEL is not set
+# CONFIG_HVC_RTAS is not set
 # CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
 # CONFIG_NVRAM is not set
@@ -645,42 +685,69 @@ CONFIG_DEVPORT=y
 CONFIG_I2C=y
 CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
 
 #
 # I2C Hardware Bus support
 #
+
+#
+# PC SMBus host controller drivers
+#
 # CONFIG_I2C_ALI1535 is not set
 # CONFIG_I2C_ALI1563 is not set
 # CONFIG_I2C_ALI15X3 is not set
 # CONFIG_I2C_AMD756 is not set
 # CONFIG_I2C_AMD8111 is not set
 # CONFIG_I2C_I801 is not set
-# CONFIG_I2C_I810 is not set
+# CONFIG_I2C_ISCH is not set
 # CONFIG_I2C_PIIX4 is not set
-CONFIG_I2C_MPC=y
 # CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_PROSAVAGE is not set
-# CONFIG_I2C_SAVAGE4 is not set
-# CONFIG_I2C_SIMTEC is not set
 # CONFIG_I2C_SIS5595 is not set
 # CONFIG_I2C_SIS630 is not set
 # CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_STUB is not set
 # CONFIG_I2C_VIA is not set
 # CONFIG_I2C_VIAPRO is not set
+
+#
+# Mac SMBus host controller drivers
+#
+# CONFIG_I2C_HYDRA is not set
+CONFIG_I2C_POWERMAC=y
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+CONFIG_I2C_MPC=y
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+
+#
+# Graphics adapter I2C/DDC channel drivers
+#
 # CONFIG_I2C_VOODOO3 is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
 # CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
 
 #
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
+# CONFIG_AT24 is not set
 # CONFIG_SENSORS_EEPROM is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
@@ -689,10 +756,13 @@ CONFIG_I2C_MPC=y
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
 # CONFIG_SPI is not set
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+# CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 CONFIG_HWMON=y
 # CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_AD7414 is not set
 # CONFIG_SENSORS_AD7418 is not set
 # CONFIG_SENSORS_ADM1021 is not set
 # CONFIG_SENSORS_ADM1025 is not set
@@ -702,6 +772,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_ADM9240 is not set
 # CONFIG_SENSORS_ADT7470 is not set
 # CONFIG_SENSORS_ADT7473 is not set
+# CONFIG_SENSORS_AMS is not set
 # CONFIG_SENSORS_ATXP1 is not set
 # CONFIG_SENSORS_DS1621 is not set
 # CONFIG_SENSORS_I5K_AMB is not set
@@ -746,6 +817,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_W83627EHF is not set
 # CONFIG_HWMON_DEBUG_CHIP is not set
 # CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
 CONFIG_WATCHDOG=y
 # CONFIG_WATCHDOG_NOWAYOUT is not set
 
@@ -753,7 +825,9 @@ CONFIG_WATCHDOG=y
 # Watchdog Device Drivers
 #
 # CONFIG_SOFT_WATCHDOG is not set
-CONFIG_83xx_WDT=y
+# CONFIG_ALIM7101_WDT is not set
+# CONFIG_8xxx_WDT is not set
+# CONFIG_WATCHDOG_RTAS is not set
 
 #
 # PCI-based Watchdog Cards
@@ -770,8 +844,10 @@ CONFIG_SSB_POSSIBLE=y
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
 
 #
 # Multimedia devices
@@ -803,10 +879,6 @@ CONFIG_VIDEO_OUTPUT_CONTROL=m
 # Display device support
 #
 # CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Sound
-#
 # CONFIG_SOUND is not set
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
@@ -821,6 +893,10 @@ CONFIG_USB_ARCH_HAS_EHCI=y
 # CONFIG_USB_OTG_BLACKLIST_HUB is not set
 
 #
+# Enable Host or Gadget support to see Inventra options
+#
+
+#
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
 #
 # CONFIG_USB_GADGET is not set
@@ -859,6 +935,7 @@ CONFIG_RTC_DRV_DS1374=y
 # CONFIG_RTC_DRV_PCF8583 is not set
 # CONFIG_RTC_DRV_M41T80 is not set
 # CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
 
 #
 # SPI RTC drivers
@@ -947,6 +1024,7 @@ CONFIG_TMPFS=y
 # CONFIG_CRAMFS is not set
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
 # CONFIG_ROMFS_FS is not set
@@ -957,14 +1035,13 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
-# CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_BIND34 is not set
 CONFIG_RPCSEC_GSS_KRB5=y
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -994,6 +1071,7 @@ CONFIG_PARTITION_ADVANCED=y
 # CONFIG_DLM is not set
 CONFIG_UCC_FAST=y
 CONFIG_UCC=y
+# CONFIG_QE_GPIO is not set
 
 #
 # Library routines
@@ -1002,6 +1080,7 @@ CONFIG_BITREVERSE=y
 # CONFIG_GENERIC_FIND_FIRST_BIT is not set
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
 # CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
@@ -1027,8 +1106,18 @@ CONFIG_FRAME_WARN=1024
 # CONFIG_SLUB_DEBUG_ON is not set
 # CONFIG_SLUB_STATS is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+# CONFIG_FTRACE is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
 # CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_IRQSTACKS is not set
+# CONFIG_BOOTX_TEXT is not set
 # CONFIG_PPC_EARLY_DEBUG is not set
 
 #
@@ -1082,6 +1171,10 @@ CONFIG_CRYPTO_PCBC=m
 # CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=y
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
 # CONFIG_CRYPTO_SHA1 is not set
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
@@ -1114,6 +1207,7 @@ CONFIG_CRYPTO_DES=y
 # CONFIG_CRYPTO_LZO is not set
 CONFIG_CRYPTO_HW=y
 # CONFIG_CRYPTO_DEV_HIFN_795X is not set
+# CONFIG_CRYPTO_DEV_TALITOS is not set
 # CONFIG_PPC_CLOCK is not set
 CONFIG_PPC_LIB_RHEAP=y
 # CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/83xx/mpc832x_rdb_defconfig b/arch/powerpc/configs/83xx/mpc832x_rdb_defconfig
index de95d327463c..4eef8c95480e 100644
--- a/arch/powerpc/configs/83xx/mpc832x_rdb_defconfig
+++ b/arch/powerpc/configs/83xx/mpc832x_rdb_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc5
-# Mon Jun  9 08:52:24 2008
+# Linux kernel version: 2.6.27-rc4
+# Thu Aug 21 00:52:19 2008
 #
 # CONFIG_PPC64 is not set
 
@@ -16,6 +16,7 @@ CONFIG_6xx=y
 # CONFIG_E200 is not set
 CONFIG_PPC_FPU=y
 # CONFIG_FSL_EMB_PERFMON is not set
+# CONFIG_ALTIVEC is not set
 CONFIG_PPC_STD_MMU=y
 CONFIG_PPC_STD_MMU_32=y
 # CONFIG_PPC_MM_SLICES is not set
@@ -32,6 +33,7 @@ CONFIG_GENERIC_HARDIRQS=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
@@ -51,6 +53,9 @@ CONFIG_PPC_UDBG_16550=y
 CONFIG_AUDIT_ARCH=y
 CONFIG_GENERIC_BUG=y
 CONFIG_DEFAULT_UIMAGE=y
+CONFIG_HIBERNATE_32=y
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
@@ -88,12 +93,12 @@ CONFIG_INITRAMFS_SOURCE=""
 CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
 # CONFIG_KALLSYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
+CONFIG_PCSPKR_PLATFORM=y
 CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
@@ -111,10 +116,16 @@ CONFIG_SLUB=y
 # CONFIG_PROFILING is not set
 # CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
+CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
 # CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+# CONFIG_HAVE_CLK is not set
 CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
@@ -125,12 +136,13 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-# CONFIG_KMOD is not set
+CONFIG_KMOD=y
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -149,37 +161,49 @@ CONFIG_CLASSIC_RCU=y
 #
 # Platform support
 #
-# CONFIG_PPC_MULTIPLATFORM is not set
-# CONFIG_PPC_82xx is not set
-CONFIG_PPC_83xx=y
-# CONFIG_PPC_86xx is not set
-# CONFIG_PPC_MPC512x is not set
-# CONFIG_PPC_MPC5121 is not set
+CONFIG_PPC_MULTIPLATFORM=y
+CONFIG_CLASSIC32=y
+CONFIG_PPC_CHRP=y
+# CONFIG_MPC5121_ADS is not set
+# CONFIG_MPC5121_GENERIC is not set
+# CONFIG_PPC_MPC52xx is not set
+CONFIG_PPC_PMAC=y
 # CONFIG_PPC_CELL is not set
 # CONFIG_PPC_CELL_NATIVE is not set
+# CONFIG_PPC_82xx is not set
 # CONFIG_PQ2ADS is not set
-CONFIG_MPC83xx=y
+CONFIG_PPC_83xx=y
 # CONFIG_MPC831x_RDB is not set
 # CONFIG_MPC832x_MDS is not set
 CONFIG_MPC832x_RDB=y
 # CONFIG_MPC834x_MDS is not set
 # CONFIG_MPC834x_ITX is not set
 # CONFIG_MPC836x_MDS is not set
+# CONFIG_MPC836x_RDK is not set
 # CONFIG_MPC837x_MDS is not set
 # CONFIG_MPC837x_RDB is not set
 # CONFIG_SBC834x is not set
+# CONFIG_ASP834x is not set
 CONFIG_PPC_MPC832x=y
+# CONFIG_PPC_86xx is not set
+# CONFIG_EMBEDDED6xx is not set
+CONFIG_PPC_NATIVE=y
+# CONFIG_UDBG_RTAS_CONSOLE is not set
 CONFIG_IPIC=y
-# CONFIG_MPIC is not set
+CONFIG_MPIC=y
 # CONFIG_MPIC_WEIRD is not set
-# CONFIG_PPC_I8259 is not set
-# CONFIG_PPC_RTAS is not set
+CONFIG_PPC_I8259=y
+CONFIG_PPC_RTAS=y
+# CONFIG_RTAS_ERROR_LOGGING is not set
+CONFIG_RTAS_PROC=y
 # CONFIG_MMIO_NVRAM is not set
-# CONFIG_PPC_MPC106 is not set
+CONFIG_PPC_MPC106=y
 # CONFIG_PPC_970_NAP is not set
 # CONFIG_PPC_INDIRECT_IO is not set
 # CONFIG_GENERIC_IOMAP is not set
 # CONFIG_CPU_FREQ is not set
+# CONFIG_PPC601_SYNC_FIX is not set
+# CONFIG_TAU is not set
 CONFIG_QUICC_ENGINE=y
 # CONFIG_FSL_ULI1575 is not set
 
@@ -196,7 +220,7 @@ CONFIG_HZ_250=y
 # CONFIG_HZ_300 is not set
 # CONFIG_HZ_1000 is not set
 CONFIG_HZ=250
-# CONFIG_SCHED_HRTICK is not set
+CONFIG_SCHED_HRTICK=y
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
@@ -207,6 +231,7 @@ CONFIG_MATH_EMULATION=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_HAS_WALK_MEMORY=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+# CONFIG_KEXEC is not set
 CONFIG_ARCH_FLATMEM_ENABLE=y
 CONFIG_ARCH_POPULATES_NODE_MAP=y
 CONFIG_SELECT_MEMORY_MODEL=y
@@ -219,6 +244,7 @@ CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_MIGRATION=y
 # CONFIG_RESOURCES_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
@@ -226,6 +252,7 @@ CONFIG_VIRT_TO_BUS=y
 CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
+CONFIG_EXTRA_TARGETS=""
 # CONFIG_PM is not set
 CONFIG_SECCOMP=y
 CONFIG_ISA_DMA_API=y
@@ -233,10 +260,13 @@ CONFIG_ISA_DMA_API=y
 #
 # Bus options
 #
+# CONFIG_ISA is not set
 CONFIG_ZONE_DMA=y
 CONFIG_GENERIC_ISA_DMA=y
 CONFIG_PPC_INDIRECT_PCI=y
 CONFIG_FSL_SOC=y
+CONFIG_FSL_PCI=y
+CONFIG_PPC_PCI_CHOICE=y
 CONFIG_PCI=y
 CONFIG_PCI_DOMAINS=y
 CONFIG_PCI_SYSCALL=y
@@ -261,10 +291,6 @@ CONFIG_PAGE_OFFSET=0xc0000000
 CONFIG_KERNEL_START=0xc0000000
 CONFIG_PHYSICAL_START=0x00000000
 CONFIG_TASK_SIZE=0xc0000000
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -362,9 +388,11 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_MTD is not set
 CONFIG_OF_DEVICE=y
 CONFIG_OF_I2C=y
+CONFIG_OF_SPI=y
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_FD is not set
+# CONFIG_MAC_FLOPPY is not set
 # CONFIG_BLK_CPQ_DA is not set
 # CONFIG_BLK_CPQ_CISS_DA is not set
 # CONFIG_BLK_DEV_DAC960 is not set
@@ -381,12 +409,14 @@ CONFIG_BLK_DEV_RAM_SIZE=32768
 # CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_PHANTOM is not set
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_HP_ILO is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -463,7 +493,10 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_DC390T is not set
 # CONFIG_SCSI_NSP32 is not set
 # CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_MESH is not set
+# CONFIG_SCSI_MAC53C94 is not set
 # CONFIG_SCSI_SRP is not set
+# CONFIG_SCSI_DH is not set
 # CONFIG_ATA is not set
 # CONFIG_MD is not set
 # CONFIG_FUSION is not set
@@ -471,12 +504,15 @@ CONFIG_SCSI_LOWLEVEL=y
 #
 # IEEE 1394 (FireWire) support
 #
+
+#
+# Enable only one of the two stacks, unless you know what you are doing
+#
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -503,6 +539,8 @@ CONFIG_ICPLUS_PHY=y
 # CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
+# CONFIG_MACE is not set
+# CONFIG_BMAC is not set
 # CONFIG_HAPPYMEAL is not set
 # CONFIG_SUNGEM is not set
 # CONFIG_CASSINI is not set
@@ -520,10 +558,8 @@ CONFIG_NETDEV_1000=y
 # CONFIG_ACENIC is not set
 # CONFIG_DL2K is not set
 CONFIG_E1000=y
-# CONFIG_E1000_NAPI is not set
 # CONFIG_E1000_DISABLE_PACKET_SPLIT is not set
 # CONFIG_E1000E is not set
-# CONFIG_E1000E_ENABLED is not set
 # CONFIG_IP1000 is not set
 # CONFIG_IGB is not set
 # CONFIG_NS83820 is not set
@@ -538,12 +574,13 @@ CONFIG_E1000=y
 # CONFIG_BNX2 is not set
 # CONFIG_GIANFAR is not set
 CONFIG_UCC_GETH=y
-CONFIG_UGETH_NAPI=y
 # CONFIG_UGETH_MAGIC_PACKET is not set
 # CONFIG_UGETH_FILTERING is not set
 # CONFIG_UGETH_TX_ON_DEMAND is not set
+# CONFIG_MV643XX_ETH is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
+# CONFIG_ATL1E is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
 # CONFIG_CHELSIO_T3 is not set
@@ -641,12 +678,15 @@ CONFIG_SERIAL_8250_RUNTIME_UARTS=4
 # CONFIG_SERIAL_UARTLITE is not set
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_PMACZILOG is not set
 # CONFIG_SERIAL_JSM is not set
 # CONFIG_SERIAL_OF_PLATFORM is not set
 # CONFIG_SERIAL_QE is not set
 CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_BRIQ_PANEL is not set
+# CONFIG_HVC_RTAS is not set
 # CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
 # CONFIG_NVRAM is not set
@@ -660,43 +700,70 @@ CONFIG_DEVPORT=y
 CONFIG_I2C=y
 CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
 
 #
 # I2C Hardware Bus support
 #
+
+#
+# PC SMBus host controller drivers
+#
 # CONFIG_I2C_ALI1535 is not set
 # CONFIG_I2C_ALI1563 is not set
 # CONFIG_I2C_ALI15X3 is not set
 # CONFIG_I2C_AMD756 is not set
 # CONFIG_I2C_AMD8111 is not set
 # CONFIG_I2C_I801 is not set
-# CONFIG_I2C_I810 is not set
+# CONFIG_I2C_ISCH is not set
 # CONFIG_I2C_PIIX4 is not set
-CONFIG_I2C_MPC=y
 # CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_PROSAVAGE is not set
-# CONFIG_I2C_SAVAGE4 is not set
-# CONFIG_I2C_SIMTEC is not set
 # CONFIG_I2C_SIS5595 is not set
 # CONFIG_I2C_SIS630 is not set
 # CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_TINY_USB is not set
 # CONFIG_I2C_VIA is not set
 # CONFIG_I2C_VIAPRO is not set
+
+#
+# Mac SMBus host controller drivers
+#
+# CONFIG_I2C_HYDRA is not set
+CONFIG_I2C_POWERMAC=y
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+CONFIG_I2C_MPC=y
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Graphics adapter I2C/DDC channel drivers
+#
 # CONFIG_I2C_VOODOO3 is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
 # CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
 
 #
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
+# CONFIG_AT24 is not set
 # CONFIG_SENSORS_EEPROM is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
@@ -719,11 +786,15 @@ CONFIG_SPI_MPC83xx=y
 # CONFIG_SPI_AT25 is not set
 # CONFIG_SPI_SPIDEV is not set
 # CONFIG_SPI_TLE62X0 is not set
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+# CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 CONFIG_HWMON=y
 # CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_AD7414 is not set
 # CONFIG_SENSORS_AD7418 is not set
+# CONFIG_SENSORS_ADCXX is not set
 # CONFIG_SENSORS_ADM1021 is not set
 # CONFIG_SENSORS_ADM1025 is not set
 # CONFIG_SENSORS_ADM1026 is not set
@@ -732,6 +803,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_ADM9240 is not set
 # CONFIG_SENSORS_ADT7470 is not set
 # CONFIG_SENSORS_ADT7473 is not set
+# CONFIG_SENSORS_AMS is not set
 # CONFIG_SENSORS_ATXP1 is not set
 # CONFIG_SENSORS_DS1621 is not set
 # CONFIG_SENSORS_I5K_AMB is not set
@@ -777,6 +849,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_W83627EHF is not set
 # CONFIG_HWMON_DEBUG_CHIP is not set
 # CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
 CONFIG_WATCHDOG=y
 # CONFIG_WATCHDOG_NOWAYOUT is not set
 
@@ -784,7 +857,9 @@ CONFIG_WATCHDOG=y
 # Watchdog Device Drivers
 #
 # CONFIG_SOFT_WATCHDOG is not set
-CONFIG_83xx_WDT=y
+# CONFIG_ALIM7101_WDT is not set
+# CONFIG_8xxx_WDT is not set
+# CONFIG_WATCHDOG_RTAS is not set
 
 #
 # PCI-based Watchdog Cards
@@ -806,8 +881,10 @@ CONFIG_SSB_POSSIBLE=y
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
 
 #
 # Multimedia devices
@@ -840,10 +917,6 @@ CONFIG_VIDEO_OUTPUT_CONTROL=m
 # Display device support
 #
 # CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Sound
-#
 # CONFIG_SOUND is not set
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
@@ -877,6 +950,7 @@ CONFIG_USB_DEVICE_CLASS=y
 # CONFIG_USB_OTG is not set
 # CONFIG_USB_OTG_WHITELIST is not set
 # CONFIG_USB_OTG_BLACKLIST_HUB is not set
+CONFIG_USB_MON=y
 
 #
 # USB Host Controller Drivers
@@ -928,6 +1002,7 @@ CONFIG_USB_STORAGE=y
 # CONFIG_USB_STORAGE_ALAUDA is not set
 # CONFIG_USB_STORAGE_ONETOUCH is not set
 # CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_SIERRA is not set
 # CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
 # CONFIG_USB_LIBUSUAL is not set
 
@@ -936,7 +1011,6 @@ CONFIG_USB_STORAGE=y
 #
 # CONFIG_USB_MDC800 is not set
 # CONFIG_USB_MICROTEK is not set
-CONFIG_USB_MON=y
 
 #
 # USB port drivers
@@ -949,7 +1023,6 @@ CONFIG_USB_MON=y
 # CONFIG_USB_EMI62 is not set
 # CONFIG_USB_EMI26 is not set
 # CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_AUERSWALD is not set
 # CONFIG_USB_RIO500 is not set
 # CONFIG_USB_LEGOTOWER is not set
 # CONFIG_USB_LCD is not set
@@ -1063,6 +1136,7 @@ CONFIG_TMPFS=y
 # CONFIG_CRAMFS is not set
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
 # CONFIG_ROMFS_FS is not set
@@ -1073,14 +1147,13 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
-# CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_BIND34 is not set
 CONFIG_RPCSEC_GSS_KRB5=y
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -1154,6 +1227,7 @@ CONFIG_NLS_ISO8859_1=y
 # CONFIG_DLM is not set
 CONFIG_UCC_FAST=y
 CONFIG_UCC=y
+# CONFIG_QE_GPIO is not set
 
 #
 # Library routines
@@ -1162,6 +1236,7 @@ CONFIG_BITREVERSE=y
 # CONFIG_GENERIC_FIND_FIRST_BIT is not set
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
+CONFIG_CRC_T10DIF=y
 CONFIG_CRC_ITU_T=y
 CONFIG_CRC32=y
 CONFIG_CRC7=y
@@ -1187,8 +1262,18 @@ CONFIG_FRAME_WARN=1024
 # CONFIG_SLUB_DEBUG_ON is not set
 # CONFIG_SLUB_STATS is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+# CONFIG_FTRACE is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
 # CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_IRQSTACKS is not set
+# CONFIG_BOOTX_TEXT is not set
 # CONFIG_PPC_EARLY_DEBUG is not set
 
 #
@@ -1242,6 +1327,10 @@ CONFIG_CRYPTO_PCBC=m
 # CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=y
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
 # CONFIG_CRYPTO_SHA1 is not set
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
@@ -1274,6 +1363,7 @@ CONFIG_CRYPTO_DES=y
 # CONFIG_CRYPTO_LZO is not set
 CONFIG_CRYPTO_HW=y
 # CONFIG_CRYPTO_DEV_HIFN_795X is not set
+# CONFIG_CRYPTO_DEV_TALITOS is not set
 # CONFIG_PPC_CLOCK is not set
 CONFIG_PPC_LIB_RHEAP=y
 # CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/83xx/mpc834x_itx_defconfig b/arch/powerpc/configs/83xx/mpc834x_itx_defconfig
index b47fc9185708..8d6513931850 100644
--- a/arch/powerpc/configs/83xx/mpc834x_itx_defconfig
+++ b/arch/powerpc/configs/83xx/mpc834x_itx_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc5
-# Mon Jun  9 08:52:25 2008
+# Linux kernel version: 2.6.27-rc4
+# Thu Aug 21 00:52:20 2008
 #
 # CONFIG_PPC64 is not set
 
@@ -16,6 +16,7 @@ CONFIG_6xx=y
 # CONFIG_E200 is not set
 CONFIG_PPC_FPU=y
 # CONFIG_FSL_EMB_PERFMON is not set
+# CONFIG_ALTIVEC is not set
 CONFIG_PPC_STD_MMU=y
 CONFIG_PPC_STD_MMU_32=y
 # CONFIG_PPC_MM_SLICES is not set
@@ -32,6 +33,7 @@ CONFIG_GENERIC_HARDIRQS=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
@@ -51,6 +53,9 @@ CONFIG_PPC_UDBG_16550=y
 CONFIG_AUDIT_ARCH=y
 CONFIG_GENERIC_BUG=y
 CONFIG_DEFAULT_UIMAGE=y
+CONFIG_HIBERNATE_32=y
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
@@ -88,12 +93,12 @@ CONFIG_INITRAMFS_SOURCE=""
 CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
 # CONFIG_KALLSYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
+CONFIG_PCSPKR_PLATFORM=y
 CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
@@ -111,10 +116,16 @@ CONFIG_SLUB=y
 # CONFIG_PROFILING is not set
 # CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
+CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
 # CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+# CONFIG_HAVE_CLK is not set
 CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
@@ -125,12 +136,13 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-# CONFIG_KMOD is not set
+CONFIG_KMOD=y
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -149,37 +161,49 @@ CONFIG_CLASSIC_RCU=y
 #
 # Platform support
 #
-# CONFIG_PPC_MULTIPLATFORM is not set
-# CONFIG_PPC_82xx is not set
-CONFIG_PPC_83xx=y
-# CONFIG_PPC_86xx is not set
-# CONFIG_PPC_MPC512x is not set
-# CONFIG_PPC_MPC5121 is not set
+CONFIG_PPC_MULTIPLATFORM=y
+CONFIG_CLASSIC32=y
+CONFIG_PPC_CHRP=y
+# CONFIG_MPC5121_ADS is not set
+# CONFIG_MPC5121_GENERIC is not set
+# CONFIG_PPC_MPC52xx is not set
+CONFIG_PPC_PMAC=y
 # CONFIG_PPC_CELL is not set
 # CONFIG_PPC_CELL_NATIVE is not set
+# CONFIG_PPC_82xx is not set
 # CONFIG_PQ2ADS is not set
-CONFIG_MPC83xx=y
+CONFIG_PPC_83xx=y
 # CONFIG_MPC831x_RDB is not set
 # CONFIG_MPC832x_MDS is not set
 # CONFIG_MPC832x_RDB is not set
 # CONFIG_MPC834x_MDS is not set
 CONFIG_MPC834x_ITX=y
 # CONFIG_MPC836x_MDS is not set
+# CONFIG_MPC836x_RDK is not set
 # CONFIG_MPC837x_MDS is not set
 # CONFIG_MPC837x_RDB is not set
 # CONFIG_SBC834x is not set
+# CONFIG_ASP834x is not set
 CONFIG_PPC_MPC834x=y
+# CONFIG_PPC_86xx is not set
+# CONFIG_EMBEDDED6xx is not set
+CONFIG_PPC_NATIVE=y
+# CONFIG_UDBG_RTAS_CONSOLE is not set
 CONFIG_IPIC=y
-# CONFIG_MPIC is not set
+CONFIG_MPIC=y
 # CONFIG_MPIC_WEIRD is not set
-# CONFIG_PPC_I8259 is not set
-# CONFIG_PPC_RTAS is not set
+CONFIG_PPC_I8259=y
+CONFIG_PPC_RTAS=y
+# CONFIG_RTAS_ERROR_LOGGING is not set
+CONFIG_RTAS_PROC=y
 # CONFIG_MMIO_NVRAM is not set
-# CONFIG_PPC_MPC106 is not set
+CONFIG_PPC_MPC106=y
 # CONFIG_PPC_970_NAP is not set
 # CONFIG_PPC_INDIRECT_IO is not set
 # CONFIG_GENERIC_IOMAP is not set
 # CONFIG_CPU_FREQ is not set
+# CONFIG_PPC601_SYNC_FIX is not set
+# CONFIG_TAU is not set
 # CONFIG_FSL_ULI1575 is not set
 
 #
@@ -195,7 +219,7 @@ CONFIG_HZ_250=y
 # CONFIG_HZ_300 is not set
 # CONFIG_HZ_1000 is not set
 CONFIG_HZ=250
-# CONFIG_SCHED_HRTICK is not set
+CONFIG_SCHED_HRTICK=y
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
@@ -205,6 +229,7 @@ CONFIG_BINFMT_ELF=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_HAS_WALK_MEMORY=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+# CONFIG_KEXEC is not set
 CONFIG_ARCH_FLATMEM_ENABLE=y
 CONFIG_ARCH_POPULATES_NODE_MAP=y
 CONFIG_SELECT_MEMORY_MODEL=y
@@ -217,6 +242,7 @@ CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_MIGRATION=y
 # CONFIG_RESOURCES_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
@@ -224,6 +250,7 @@ CONFIG_VIRT_TO_BUS=y
 CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
+CONFIG_EXTRA_TARGETS=""
 # CONFIG_PM is not set
 CONFIG_SECCOMP=y
 CONFIG_ISA_DMA_API=y
@@ -231,10 +258,13 @@ CONFIG_ISA_DMA_API=y
 #
 # Bus options
 #
+# CONFIG_ISA is not set
 CONFIG_ZONE_DMA=y
 CONFIG_GENERIC_ISA_DMA=y
 CONFIG_PPC_INDIRECT_PCI=y
 CONFIG_FSL_SOC=y
+CONFIG_FSL_PCI=y
+CONFIG_PPC_PCI_CHOICE=y
 CONFIG_PCI=y
 CONFIG_PCI_DOMAINS=y
 CONFIG_PCI_SYSCALL=y
@@ -259,10 +289,6 @@ CONFIG_PAGE_OFFSET=0xc0000000
 CONFIG_KERNEL_START=0xc0000000
 CONFIG_PHYSICAL_START=0x00000000
 CONFIG_TASK_SIZE=0xc0000000
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -439,9 +465,11 @@ CONFIG_MTD_PHYSMAP_BANKWIDTH=2
 # CONFIG_MTD_UBI is not set
 CONFIG_OF_DEVICE=y
 CONFIG_OF_I2C=y
+CONFIG_OF_SPI=y
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_FD is not set
+# CONFIG_MAC_FLOPPY is not set
 # CONFIG_BLK_CPQ_DA is not set
 # CONFIG_BLK_CPQ_CISS_DA is not set
 # CONFIG_BLK_DEV_DAC960 is not set
@@ -458,18 +486,17 @@ CONFIG_BLK_DEV_RAM_SIZE=32768
 # CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_PHANTOM is not set
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_HP_ILO is not set
 CONFIG_HAVE_IDE=y
 CONFIG_IDE=y
-CONFIG_IDE_MAX_HWIFS=4
 # CONFIG_BLK_DEV_IDE is not set
-# CONFIG_BLK_DEV_HD_ONLY is not set
-# CONFIG_BLK_DEV_HD is not set
 
 #
 # SCSI device support
@@ -545,7 +572,10 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_DC390T is not set
 # CONFIG_SCSI_NSP32 is not set
 # CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_MESH is not set
+# CONFIG_SCSI_MAC53C94 is not set
 # CONFIG_SCSI_SRP is not set
+# CONFIG_SCSI_DH is not set
 CONFIG_ATA=y
 # CONFIG_ATA_NONSTANDARD is not set
 CONFIG_SATA_PMP=y
@@ -623,12 +653,15 @@ CONFIG_MD_RAID1=y
 #
 # IEEE 1394 (FireWire) support
 #
+
+#
+# Enable only one of the two stacks, unless you know what you are doing
+#
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -659,7 +692,6 @@ CONFIG_NETDEV_1000=y
 # CONFIG_DL2K is not set
 # CONFIG_E1000 is not set
 # CONFIG_E1000E is not set
-# CONFIG_E1000E_ENABLED is not set
 # CONFIG_IP1000 is not set
 # CONFIG_IGB is not set
 # CONFIG_NS83820 is not set
@@ -673,9 +705,10 @@ CONFIG_NETDEV_1000=y
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
 CONFIG_GIANFAR=y
-CONFIG_GFAR_NAPI=y
+# CONFIG_MV643XX_ETH is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
+# CONFIG_ATL1E is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
 # CONFIG_CHELSIO_T3 is not set
@@ -753,11 +786,14 @@ CONFIG_SERIAL_8250_RUNTIME_UARTS=4
 # CONFIG_SERIAL_UARTLITE is not set
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_PMACZILOG is not set
 # CONFIG_SERIAL_JSM is not set
 # CONFIG_SERIAL_OF_PLATFORM is not set
 CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_BRIQ_PANEL is not set
+# CONFIG_HVC_RTAS is not set
 # CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
 # CONFIG_NVRAM is not set
@@ -769,43 +805,70 @@ CONFIG_DEVPORT=y
 CONFIG_I2C=y
 CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
 
 #
 # I2C Hardware Bus support
 #
+
+#
+# PC SMBus host controller drivers
+#
 # CONFIG_I2C_ALI1535 is not set
 # CONFIG_I2C_ALI1563 is not set
 # CONFIG_I2C_ALI15X3 is not set
 # CONFIG_I2C_AMD756 is not set
 # CONFIG_I2C_AMD8111 is not set
 # CONFIG_I2C_I801 is not set
-# CONFIG_I2C_I810 is not set
+# CONFIG_I2C_ISCH is not set
 # CONFIG_I2C_PIIX4 is not set
-CONFIG_I2C_MPC=y
 # CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_PROSAVAGE is not set
-# CONFIG_I2C_SAVAGE4 is not set
-# CONFIG_I2C_SIMTEC is not set
 # CONFIG_I2C_SIS5595 is not set
 # CONFIG_I2C_SIS630 is not set
 # CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_TINY_USB is not set
 # CONFIG_I2C_VIA is not set
 # CONFIG_I2C_VIAPRO is not set
+
+#
+# Mac SMBus host controller drivers
+#
+# CONFIG_I2C_HYDRA is not set
+CONFIG_I2C_POWERMAC=y
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+CONFIG_I2C_MPC=y
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Graphics adapter I2C/DDC channel drivers
+#
 # CONFIG_I2C_VOODOO3 is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
 # CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
 
 #
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
+# CONFIG_AT24 is not set
 # CONFIG_SENSORS_EEPROM is not set
 CONFIG_SENSORS_PCF8574=y
 # CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
@@ -828,10 +891,13 @@ CONFIG_SPI_MPC83xx=y
 # CONFIG_SPI_AT25 is not set
 # CONFIG_SPI_SPIDEV is not set
 # CONFIG_SPI_TLE62X0 is not set
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+# CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 # CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
 CONFIG_WATCHDOG=y
 # CONFIG_WATCHDOG_NOWAYOUT is not set
 
@@ -839,7 +905,9 @@ CONFIG_WATCHDOG=y
 # Watchdog Device Drivers
 #
 # CONFIG_SOFT_WATCHDOG is not set
-CONFIG_83xx_WDT=y
+# CONFIG_ALIM7101_WDT is not set
+# CONFIG_8xxx_WDT is not set
+# CONFIG_WATCHDOG_RTAS is not set
 
 #
 # PCI-based Watchdog Cards
@@ -861,8 +929,10 @@ CONFIG_SSB_POSSIBLE=y
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
 
 #
 # Multimedia devices
@@ -895,10 +965,6 @@ CONFIG_VIDEO_OUTPUT_CONTROL=m
 # Display device support
 #
 # CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Sound
-#
 # CONFIG_SOUND is not set
 CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
@@ -917,6 +983,7 @@ CONFIG_USB_DEVICE_CLASS=y
 # CONFIG_USB_OTG is not set
 # CONFIG_USB_OTG_WHITELIST is not set
 # CONFIG_USB_OTG_BLACKLIST_HUB is not set
+CONFIG_USB_MON=y
 
 #
 # USB Host Controller Drivers
@@ -960,6 +1027,7 @@ CONFIG_USB_STORAGE=y
 # CONFIG_USB_STORAGE_JUMPSHOT is not set
 # CONFIG_USB_STORAGE_ALAUDA is not set
 # CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_SIERRA is not set
 # CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
 # CONFIG_USB_LIBUSUAL is not set
 
@@ -968,7 +1036,6 @@ CONFIG_USB_STORAGE=y
 #
 # CONFIG_USB_MDC800 is not set
 # CONFIG_USB_MICROTEK is not set
-CONFIG_USB_MON=y
 
 #
 # USB port drivers
@@ -981,7 +1048,6 @@ CONFIG_USB_MON=y
 # CONFIG_USB_EMI62 is not set
 # CONFIG_USB_EMI26 is not set
 # CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_AUERSWALD is not set
 # CONFIG_USB_RIO500 is not set
 # CONFIG_USB_LEGOTOWER is not set
 # CONFIG_USB_LCD is not set
@@ -1035,10 +1101,13 @@ CONFIG_RTC_DRV_DS1307=y
 # CONFIG_RTC_DRV_PCF8583 is not set
 # CONFIG_RTC_DRV_M41T80 is not set
 # CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
 
 #
 # SPI RTC drivers
 #
+# CONFIG_RTC_DRV_M41T94 is not set
+# CONFIG_RTC_DRV_DS1305 is not set
 # CONFIG_RTC_DRV_MAX6902 is not set
 # CONFIG_RTC_DRV_R9701 is not set
 # CONFIG_RTC_DRV_RS5C348 is not set
@@ -1130,6 +1199,7 @@ CONFIG_TMPFS=y
 # CONFIG_CRAMFS is not set
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
 # CONFIG_ROMFS_FS is not set
@@ -1140,14 +1210,13 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
-# CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_BIND34 is not set
 CONFIG_RPCSEC_GSS_KRB5=y
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -1226,6 +1295,7 @@ CONFIG_BITREVERSE=y
 # CONFIG_GENERIC_FIND_FIRST_BIT is not set
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
+CONFIG_CRC_T10DIF=y
 # CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
@@ -1251,8 +1321,18 @@ CONFIG_FRAME_WARN=1024
 # CONFIG_SLUB_DEBUG_ON is not set
 # CONFIG_SLUB_STATS is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+# CONFIG_FTRACE is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
 # CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_IRQSTACKS is not set
+# CONFIG_BOOTX_TEXT is not set
 # CONFIG_PPC_EARLY_DEBUG is not set
 
 #
@@ -1306,6 +1386,10 @@ CONFIG_CRYPTO_PCBC=m
 # CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=y
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
 # CONFIG_CRYPTO_SHA1 is not set
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
@@ -1338,5 +1422,6 @@ CONFIG_CRYPTO_DES=y
 # CONFIG_CRYPTO_LZO is not set
 CONFIG_CRYPTO_HW=y
 # CONFIG_CRYPTO_DEV_HIFN_795X is not set
+# CONFIG_CRYPTO_DEV_TALITOS is not set
 # CONFIG_PPC_CLOCK is not set
 # CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/83xx/mpc834x_itxgp_defconfig b/arch/powerpc/configs/83xx/mpc834x_itxgp_defconfig
index fdac4845bad9..a8afa39d6f76 100644
--- a/arch/powerpc/configs/83xx/mpc834x_itxgp_defconfig
+++ b/arch/powerpc/configs/83xx/mpc834x_itxgp_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc5
-# Mon Jun  9 08:52:26 2008
+# Linux kernel version: 2.6.27-rc4
+# Thu Aug 21 00:52:21 2008
 #
 # CONFIG_PPC64 is not set
 
@@ -16,6 +16,7 @@ CONFIG_6xx=y
 # CONFIG_E200 is not set
 CONFIG_PPC_FPU=y
 # CONFIG_FSL_EMB_PERFMON is not set
+# CONFIG_ALTIVEC is not set
 CONFIG_PPC_STD_MMU=y
 CONFIG_PPC_STD_MMU_32=y
 # CONFIG_PPC_MM_SLICES is not set
@@ -32,6 +33,7 @@ CONFIG_GENERIC_HARDIRQS=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
@@ -51,6 +53,9 @@ CONFIG_PPC_UDBG_16550=y
 CONFIG_AUDIT_ARCH=y
 CONFIG_GENERIC_BUG=y
 CONFIG_DEFAULT_UIMAGE=y
+CONFIG_HIBERNATE_32=y
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
@@ -88,12 +93,12 @@ CONFIG_INITRAMFS_SOURCE=""
 CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
 # CONFIG_KALLSYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
+CONFIG_PCSPKR_PLATFORM=y
 CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
@@ -111,10 +116,16 @@ CONFIG_SLUB=y
 # CONFIG_PROFILING is not set
 # CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
+CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
 # CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+# CONFIG_HAVE_CLK is not set
 CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
@@ -125,12 +136,13 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-# CONFIG_KMOD is not set
+CONFIG_KMOD=y
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -149,37 +161,49 @@ CONFIG_CLASSIC_RCU=y
 #
 # Platform support
 #
-# CONFIG_PPC_MULTIPLATFORM is not set
-# CONFIG_PPC_82xx is not set
-CONFIG_PPC_83xx=y
-# CONFIG_PPC_86xx is not set
-# CONFIG_PPC_MPC512x is not set
-# CONFIG_PPC_MPC5121 is not set
+CONFIG_PPC_MULTIPLATFORM=y
+CONFIG_CLASSIC32=y
+CONFIG_PPC_CHRP=y
+# CONFIG_MPC5121_ADS is not set
+# CONFIG_MPC5121_GENERIC is not set
+# CONFIG_PPC_MPC52xx is not set
+CONFIG_PPC_PMAC=y
 # CONFIG_PPC_CELL is not set
 # CONFIG_PPC_CELL_NATIVE is not set
+# CONFIG_PPC_82xx is not set
 # CONFIG_PQ2ADS is not set
-CONFIG_MPC83xx=y
+CONFIG_PPC_83xx=y
 # CONFIG_MPC831x_RDB is not set
 # CONFIG_MPC832x_MDS is not set
 # CONFIG_MPC832x_RDB is not set
 # CONFIG_MPC834x_MDS is not set
 CONFIG_MPC834x_ITX=y
 # CONFIG_MPC836x_MDS is not set
+# CONFIG_MPC836x_RDK is not set
 # CONFIG_MPC837x_MDS is not set
 # CONFIG_MPC837x_RDB is not set
 # CONFIG_SBC834x is not set
+# CONFIG_ASP834x is not set
 CONFIG_PPC_MPC834x=y
+# CONFIG_PPC_86xx is not set
+# CONFIG_EMBEDDED6xx is not set
+CONFIG_PPC_NATIVE=y
+# CONFIG_UDBG_RTAS_CONSOLE is not set
 CONFIG_IPIC=y
-# CONFIG_MPIC is not set
+CONFIG_MPIC=y
 # CONFIG_MPIC_WEIRD is not set
-# CONFIG_PPC_I8259 is not set
-# CONFIG_PPC_RTAS is not set
+CONFIG_PPC_I8259=y
+CONFIG_PPC_RTAS=y
+# CONFIG_RTAS_ERROR_LOGGING is not set
+CONFIG_RTAS_PROC=y
 # CONFIG_MMIO_NVRAM is not set
-# CONFIG_PPC_MPC106 is not set
+CONFIG_PPC_MPC106=y
 # CONFIG_PPC_970_NAP is not set
 # CONFIG_PPC_INDIRECT_IO is not set
 # CONFIG_GENERIC_IOMAP is not set
 # CONFIG_CPU_FREQ is not set
+# CONFIG_PPC601_SYNC_FIX is not set
+# CONFIG_TAU is not set
 # CONFIG_FSL_ULI1575 is not set
 
 #
@@ -195,7 +219,7 @@ CONFIG_HZ_250=y
 # CONFIG_HZ_300 is not set
 # CONFIG_HZ_1000 is not set
 CONFIG_HZ=250
-# CONFIG_SCHED_HRTICK is not set
+CONFIG_SCHED_HRTICK=y
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
@@ -205,6 +229,7 @@ CONFIG_BINFMT_ELF=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_HAS_WALK_MEMORY=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+# CONFIG_KEXEC is not set
 CONFIG_ARCH_FLATMEM_ENABLE=y
 CONFIG_ARCH_POPULATES_NODE_MAP=y
 CONFIG_SELECT_MEMORY_MODEL=y
@@ -217,6 +242,7 @@ CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_MIGRATION=y
 # CONFIG_RESOURCES_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
@@ -224,6 +250,7 @@ CONFIG_VIRT_TO_BUS=y
 CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
+CONFIG_EXTRA_TARGETS=""
 # CONFIG_PM is not set
 CONFIG_SECCOMP=y
 CONFIG_ISA_DMA_API=y
@@ -231,10 +258,13 @@ CONFIG_ISA_DMA_API=y
 #
 # Bus options
 #
+# CONFIG_ISA is not set
 CONFIG_ZONE_DMA=y
 CONFIG_GENERIC_ISA_DMA=y
 CONFIG_PPC_INDIRECT_PCI=y
 CONFIG_FSL_SOC=y
+CONFIG_FSL_PCI=y
+CONFIG_PPC_PCI_CHOICE=y
 CONFIG_PCI=y
 CONFIG_PCI_DOMAINS=y
 CONFIG_PCI_SYSCALL=y
@@ -259,10 +289,6 @@ CONFIG_PAGE_OFFSET=0xc0000000
 CONFIG_KERNEL_START=0xc0000000
 CONFIG_PHYSICAL_START=0x00000000
 CONFIG_TASK_SIZE=0xc0000000
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -439,9 +465,11 @@ CONFIG_MTD_PHYSMAP_BANKWIDTH=2
 # CONFIG_MTD_UBI is not set
 CONFIG_OF_DEVICE=y
 CONFIG_OF_I2C=y
+CONFIG_OF_SPI=y
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_FD is not set
+# CONFIG_MAC_FLOPPY is not set
 # CONFIG_BLK_CPQ_DA is not set
 # CONFIG_BLK_CPQ_CISS_DA is not set
 # CONFIG_BLK_DEV_DAC960 is not set
@@ -458,12 +486,14 @@ CONFIG_BLK_DEV_RAM_SIZE=32768
 # CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_PHANTOM is not set
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_HP_ILO is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -540,7 +570,10 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_DC390T is not set
 # CONFIG_SCSI_NSP32 is not set
 # CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_MESH is not set
+# CONFIG_SCSI_MAC53C94 is not set
 # CONFIG_SCSI_SRP is not set
+# CONFIG_SCSI_DH is not set
 # CONFIG_ATA is not set
 # CONFIG_MD is not set
 # CONFIG_FUSION is not set
@@ -548,12 +581,15 @@ CONFIG_SCSI_LOWLEVEL=y
 #
 # IEEE 1394 (FireWire) support
 #
+
+#
+# Enable only one of the two stacks, unless you know what you are doing
+#
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -584,7 +620,6 @@ CONFIG_NETDEV_1000=y
 # CONFIG_DL2K is not set
 # CONFIG_E1000 is not set
 # CONFIG_E1000E is not set
-# CONFIG_E1000E_ENABLED is not set
 # CONFIG_IP1000 is not set
 # CONFIG_IGB is not set
 # CONFIG_NS83820 is not set
@@ -598,9 +633,10 @@ CONFIG_NETDEV_1000=y
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
 CONFIG_GIANFAR=y
-CONFIG_GFAR_NAPI=y
+# CONFIG_MV643XX_ETH is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
+# CONFIG_ATL1E is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
 # CONFIG_CHELSIO_T3 is not set
@@ -678,11 +714,14 @@ CONFIG_SERIAL_8250_RUNTIME_UARTS=4
 # CONFIG_SERIAL_UARTLITE is not set
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_PMACZILOG is not set
 # CONFIG_SERIAL_JSM is not set
 # CONFIG_SERIAL_OF_PLATFORM is not set
 CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_BRIQ_PANEL is not set
+# CONFIG_HVC_RTAS is not set
 # CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
 # CONFIG_NVRAM is not set
@@ -694,43 +733,70 @@ CONFIG_DEVPORT=y
 CONFIG_I2C=y
 CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
 
 #
 # I2C Hardware Bus support
 #
+
+#
+# PC SMBus host controller drivers
+#
 # CONFIG_I2C_ALI1535 is not set
 # CONFIG_I2C_ALI1563 is not set
 # CONFIG_I2C_ALI15X3 is not set
 # CONFIG_I2C_AMD756 is not set
 # CONFIG_I2C_AMD8111 is not set
 # CONFIG_I2C_I801 is not set
-# CONFIG_I2C_I810 is not set
+# CONFIG_I2C_ISCH is not set
 # CONFIG_I2C_PIIX4 is not set
-CONFIG_I2C_MPC=y
 # CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_PROSAVAGE is not set
-# CONFIG_I2C_SAVAGE4 is not set
-# CONFIG_I2C_SIMTEC is not set
 # CONFIG_I2C_SIS5595 is not set
 # CONFIG_I2C_SIS630 is not set
 # CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_TINY_USB is not set
 # CONFIG_I2C_VIA is not set
 # CONFIG_I2C_VIAPRO is not set
+
+#
+# Mac SMBus host controller drivers
+#
+# CONFIG_I2C_HYDRA is not set
+CONFIG_I2C_POWERMAC=y
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+CONFIG_I2C_MPC=y
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Graphics adapter I2C/DDC channel drivers
+#
 # CONFIG_I2C_VOODOO3 is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
 # CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
 
 #
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
+# CONFIG_AT24 is not set
 # CONFIG_SENSORS_EEPROM is not set
 CONFIG_SENSORS_PCF8574=y
 # CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
@@ -753,10 +819,13 @@ CONFIG_SPI_MPC83xx=y
 # CONFIG_SPI_AT25 is not set
 # CONFIG_SPI_SPIDEV is not set
 # CONFIG_SPI_TLE62X0 is not set
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+# CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 # CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
 CONFIG_WATCHDOG=y
 # CONFIG_WATCHDOG_NOWAYOUT is not set
 
@@ -764,7 +833,9 @@ CONFIG_WATCHDOG=y
 # Watchdog Device Drivers
 #
 # CONFIG_SOFT_WATCHDOG is not set
-CONFIG_83xx_WDT=y
+# CONFIG_ALIM7101_WDT is not set
+# CONFIG_8xxx_WDT is not set
+# CONFIG_WATCHDOG_RTAS is not set
 
 #
 # PCI-based Watchdog Cards
@@ -786,8 +857,10 @@ CONFIG_SSB_POSSIBLE=y
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
 
 #
 # Multimedia devices
@@ -820,10 +893,6 @@ CONFIG_VIDEO_OUTPUT_CONTROL=m
 # Display device support
 #
 # CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Sound
-#
 # CONFIG_SOUND is not set
 CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
@@ -842,6 +911,7 @@ CONFIG_USB_DEVICE_CLASS=y
 # CONFIG_USB_OTG is not set
 # CONFIG_USB_OTG_WHITELIST is not set
 # CONFIG_USB_OTG_BLACKLIST_HUB is not set
+CONFIG_USB_MON=y
 
 #
 # USB Host Controller Drivers
@@ -885,6 +955,7 @@ CONFIG_USB_STORAGE=y
 # CONFIG_USB_STORAGE_JUMPSHOT is not set
 # CONFIG_USB_STORAGE_ALAUDA is not set
 # CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_SIERRA is not set
 # CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
 # CONFIG_USB_LIBUSUAL is not set
 
@@ -893,7 +964,6 @@ CONFIG_USB_STORAGE=y
 #
 # CONFIG_USB_MDC800 is not set
 # CONFIG_USB_MICROTEK is not set
-CONFIG_USB_MON=y
 
 #
 # USB port drivers
@@ -906,7 +976,6 @@ CONFIG_USB_MON=y
 # CONFIG_USB_EMI62 is not set
 # CONFIG_USB_EMI26 is not set
 # CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_AUERSWALD is not set
 # CONFIG_USB_RIO500 is not set
 # CONFIG_USB_LEGOTOWER is not set
 # CONFIG_USB_LCD is not set
@@ -959,10 +1028,13 @@ CONFIG_RTC_DRV_DS1307=y
 # CONFIG_RTC_DRV_PCF8583 is not set
 # CONFIG_RTC_DRV_M41T80 is not set
 # CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
 
 #
 # SPI RTC drivers
 #
+# CONFIG_RTC_DRV_M41T94 is not set
+# CONFIG_RTC_DRV_DS1305 is not set
 # CONFIG_RTC_DRV_MAX6902 is not set
 # CONFIG_RTC_DRV_R9701 is not set
 # CONFIG_RTC_DRV_RS5C348 is not set
@@ -1054,6 +1126,7 @@ CONFIG_TMPFS=y
 # CONFIG_CRAMFS is not set
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
 # CONFIG_ROMFS_FS is not set
@@ -1064,14 +1137,13 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
-# CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_BIND34 is not set
 CONFIG_RPCSEC_GSS_KRB5=y
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -1150,6 +1222,7 @@ CONFIG_BITREVERSE=y
 # CONFIG_GENERIC_FIND_FIRST_BIT is not set
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
+CONFIG_CRC_T10DIF=y
 # CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
@@ -1175,8 +1248,18 @@ CONFIG_FRAME_WARN=1024
 # CONFIG_SLUB_DEBUG_ON is not set
 # CONFIG_SLUB_STATS is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+# CONFIG_FTRACE is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
 # CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_IRQSTACKS is not set
+# CONFIG_BOOTX_TEXT is not set
 # CONFIG_PPC_EARLY_DEBUG is not set
 
 #
@@ -1230,6 +1313,10 @@ CONFIG_CRYPTO_PCBC=m
 # CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=y
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
 # CONFIG_CRYPTO_SHA1 is not set
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
@@ -1262,5 +1349,6 @@ CONFIG_CRYPTO_DES=y
 # CONFIG_CRYPTO_LZO is not set
 CONFIG_CRYPTO_HW=y
 # CONFIG_CRYPTO_DEV_HIFN_795X is not set
+# CONFIG_CRYPTO_DEV_TALITOS is not set
 # CONFIG_PPC_CLOCK is not set
 # CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/83xx/mpc834x_mds_defconfig b/arch/powerpc/configs/83xx/mpc834x_mds_defconfig
index c82e96e984fc..24c320a36670 100644
--- a/arch/powerpc/configs/83xx/mpc834x_mds_defconfig
+++ b/arch/powerpc/configs/83xx/mpc834x_mds_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc5
-# Mon Jun  9 08:52:26 2008
+# Linux kernel version: 2.6.27-rc4
+# Thu Aug 21 00:52:21 2008
 #
 # CONFIG_PPC64 is not set
 
@@ -16,6 +16,7 @@ CONFIG_6xx=y
 # CONFIG_E200 is not set
 CONFIG_PPC_FPU=y
 # CONFIG_FSL_EMB_PERFMON is not set
+# CONFIG_ALTIVEC is not set
 CONFIG_PPC_STD_MMU=y
 CONFIG_PPC_STD_MMU_32=y
 # CONFIG_PPC_MM_SLICES is not set
@@ -32,6 +33,7 @@ CONFIG_GENERIC_HARDIRQS=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
@@ -51,6 +53,9 @@ CONFIG_PPC_UDBG_16550=y
 CONFIG_AUDIT_ARCH=y
 CONFIG_GENERIC_BUG=y
 CONFIG_DEFAULT_UIMAGE=y
+CONFIG_HIBERNATE_32=y
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
@@ -88,12 +93,12 @@ CONFIG_INITRAMFS_SOURCE=""
 CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
 # CONFIG_KALLSYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
+CONFIG_PCSPKR_PLATFORM=y
 CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
@@ -111,10 +116,16 @@ CONFIG_SLUB=y
 # CONFIG_PROFILING is not set
 # CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
+CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
 # CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+# CONFIG_HAVE_CLK is not set
 CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
@@ -125,12 +136,13 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-# CONFIG_KMOD is not set
+CONFIG_KMOD=y
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -149,37 +161,49 @@ CONFIG_CLASSIC_RCU=y
 #
 # Platform support
 #
-# CONFIG_PPC_MULTIPLATFORM is not set
-# CONFIG_PPC_82xx is not set
-CONFIG_PPC_83xx=y
-# CONFIG_PPC_86xx is not set
-# CONFIG_PPC_MPC512x is not set
-# CONFIG_PPC_MPC5121 is not set
+CONFIG_PPC_MULTIPLATFORM=y
+CONFIG_CLASSIC32=y
+CONFIG_PPC_CHRP=y
+# CONFIG_MPC5121_ADS is not set
+# CONFIG_MPC5121_GENERIC is not set
+# CONFIG_PPC_MPC52xx is not set
+CONFIG_PPC_PMAC=y
 # CONFIG_PPC_CELL is not set
 # CONFIG_PPC_CELL_NATIVE is not set
+# CONFIG_PPC_82xx is not set
 # CONFIG_PQ2ADS is not set
-CONFIG_MPC83xx=y
+CONFIG_PPC_83xx=y
 # CONFIG_MPC831x_RDB is not set
 # CONFIG_MPC832x_MDS is not set
 # CONFIG_MPC832x_RDB is not set
 CONFIG_MPC834x_MDS=y
 # CONFIG_MPC834x_ITX is not set
 # CONFIG_MPC836x_MDS is not set
+# CONFIG_MPC836x_RDK is not set
 # CONFIG_MPC837x_MDS is not set
 # CONFIG_MPC837x_RDB is not set
 # CONFIG_SBC834x is not set
+# CONFIG_ASP834x is not set
 CONFIG_PPC_MPC834x=y
+# CONFIG_PPC_86xx is not set
+# CONFIG_EMBEDDED6xx is not set
+CONFIG_PPC_NATIVE=y
+# CONFIG_UDBG_RTAS_CONSOLE is not set
 CONFIG_IPIC=y
-# CONFIG_MPIC is not set
+CONFIG_MPIC=y
 # CONFIG_MPIC_WEIRD is not set
-# CONFIG_PPC_I8259 is not set
-# CONFIG_PPC_RTAS is not set
+CONFIG_PPC_I8259=y
+CONFIG_PPC_RTAS=y
+# CONFIG_RTAS_ERROR_LOGGING is not set
+CONFIG_RTAS_PROC=y
 # CONFIG_MMIO_NVRAM is not set
-# CONFIG_PPC_MPC106 is not set
+CONFIG_PPC_MPC106=y
 # CONFIG_PPC_970_NAP is not set
 # CONFIG_PPC_INDIRECT_IO is not set
 # CONFIG_GENERIC_IOMAP is not set
 # CONFIG_CPU_FREQ is not set
+# CONFIG_PPC601_SYNC_FIX is not set
+# CONFIG_TAU is not set
 # CONFIG_FSL_ULI1575 is not set
 
 #
@@ -195,7 +219,7 @@ CONFIG_HZ_250=y
 # CONFIG_HZ_300 is not set
 # CONFIG_HZ_1000 is not set
 CONFIG_HZ=250
-# CONFIG_SCHED_HRTICK is not set
+CONFIG_SCHED_HRTICK=y
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
@@ -205,6 +229,7 @@ CONFIG_BINFMT_ELF=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_HAS_WALK_MEMORY=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+# CONFIG_KEXEC is not set
 CONFIG_ARCH_FLATMEM_ENABLE=y
 CONFIG_ARCH_POPULATES_NODE_MAP=y
 CONFIG_SELECT_MEMORY_MODEL=y
@@ -217,6 +242,7 @@ CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_MIGRATION=y
 # CONFIG_RESOURCES_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
@@ -224,6 +250,7 @@ CONFIG_VIRT_TO_BUS=y
 CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
+CONFIG_EXTRA_TARGETS=""
 # CONFIG_PM is not set
 CONFIG_SECCOMP=y
 CONFIG_ISA_DMA_API=y
@@ -231,10 +258,13 @@ CONFIG_ISA_DMA_API=y
 #
 # Bus options
 #
+# CONFIG_ISA is not set
 CONFIG_ZONE_DMA=y
 CONFIG_GENERIC_ISA_DMA=y
 CONFIG_PPC_INDIRECT_PCI=y
 CONFIG_FSL_SOC=y
+CONFIG_FSL_PCI=y
+CONFIG_PPC_PCI_CHOICE=y
 CONFIG_PCI=y
 CONFIG_PCI_DOMAINS=y
 CONFIG_PCI_SYSCALL=y
@@ -259,10 +289,6 @@ CONFIG_PAGE_OFFSET=0xc0000000
 CONFIG_KERNEL_START=0xc0000000
 CONFIG_PHYSICAL_START=0x00000000
 CONFIG_TASK_SIZE=0xc0000000
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -363,6 +389,7 @@ CONFIG_OF_I2C=y
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_FD is not set
+# CONFIG_MAC_FLOPPY is not set
 # CONFIG_BLK_CPQ_DA is not set
 # CONFIG_BLK_CPQ_CISS_DA is not set
 # CONFIG_BLK_DEV_DAC960 is not set
@@ -378,12 +405,14 @@ CONFIG_BLK_DEV_RAM_SIZE=32768
 # CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_PHANTOM is not set
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_HP_ILO is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -401,12 +430,15 @@ CONFIG_HAVE_IDE=y
 #
 # IEEE 1394 (FireWire) support
 #
+
+#
+# Enable only one of the two stacks, unless you know what you are doing
+#
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -433,6 +465,8 @@ CONFIG_MARVELL_PHY=y
 # CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
+# CONFIG_MACE is not set
+# CONFIG_BMAC is not set
 # CONFIG_HAPPYMEAL is not set
 # CONFIG_SUNGEM is not set
 # CONFIG_CASSINI is not set
@@ -468,7 +502,6 @@ CONFIG_NETDEV_1000=y
 # CONFIG_DL2K is not set
 # CONFIG_E1000 is not set
 # CONFIG_E1000E is not set
-# CONFIG_E1000E_ENABLED is not set
 # CONFIG_IP1000 is not set
 # CONFIG_IGB is not set
 # CONFIG_NS83820 is not set
@@ -482,9 +515,10 @@ CONFIG_NETDEV_1000=y
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
 CONFIG_GIANFAR=y
-# CONFIG_GFAR_NAPI is not set
+# CONFIG_MV643XX_ETH is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
+# CONFIG_ATL1E is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
 # CONFIG_CHELSIO_T3 is not set
@@ -572,11 +606,14 @@ CONFIG_SERIAL_8250_RUNTIME_UARTS=4
 # CONFIG_SERIAL_UARTLITE is not set
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_PMACZILOG is not set
 # CONFIG_SERIAL_JSM is not set
 # CONFIG_SERIAL_OF_PLATFORM is not set
 CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_BRIQ_PANEL is not set
+# CONFIG_HVC_RTAS is not set
 # CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
 # CONFIG_NVRAM is not set
@@ -588,42 +625,69 @@ CONFIG_DEVPORT=y
 CONFIG_I2C=y
 CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
 
 #
 # I2C Hardware Bus support
 #
+
+#
+# PC SMBus host controller drivers
+#
 # CONFIG_I2C_ALI1535 is not set
 # CONFIG_I2C_ALI1563 is not set
 # CONFIG_I2C_ALI15X3 is not set
 # CONFIG_I2C_AMD756 is not set
 # CONFIG_I2C_AMD8111 is not set
 # CONFIG_I2C_I801 is not set
-# CONFIG_I2C_I810 is not set
+# CONFIG_I2C_ISCH is not set
 # CONFIG_I2C_PIIX4 is not set
-CONFIG_I2C_MPC=y
 # CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_PROSAVAGE is not set
-# CONFIG_I2C_SAVAGE4 is not set
-# CONFIG_I2C_SIMTEC is not set
 # CONFIG_I2C_SIS5595 is not set
 # CONFIG_I2C_SIS630 is not set
 # CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_STUB is not set
 # CONFIG_I2C_VIA is not set
 # CONFIG_I2C_VIAPRO is not set
+
+#
+# Mac SMBus host controller drivers
+#
+# CONFIG_I2C_HYDRA is not set
+CONFIG_I2C_POWERMAC=y
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+CONFIG_I2C_MPC=y
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+
+#
+# Graphics adapter I2C/DDC channel drivers
+#
 # CONFIG_I2C_VOODOO3 is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
 # CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
 
 #
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
+# CONFIG_AT24 is not set
 # CONFIG_SENSORS_EEPROM is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
@@ -632,10 +696,13 @@ CONFIG_I2C_MPC=y
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
 # CONFIG_SPI is not set
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+# CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 CONFIG_HWMON=y
 # CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_AD7414 is not set
 # CONFIG_SENSORS_AD7418 is not set
 # CONFIG_SENSORS_ADM1021 is not set
 # CONFIG_SENSORS_ADM1025 is not set
@@ -645,6 +712,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_ADM9240 is not set
 # CONFIG_SENSORS_ADT7470 is not set
 # CONFIG_SENSORS_ADT7473 is not set
+# CONFIG_SENSORS_AMS is not set
 # CONFIG_SENSORS_ATXP1 is not set
 # CONFIG_SENSORS_DS1621 is not set
 # CONFIG_SENSORS_I5K_AMB is not set
@@ -689,6 +757,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_W83627EHF is not set
 # CONFIG_HWMON_DEBUG_CHIP is not set
 # CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
 CONFIG_WATCHDOG=y
 # CONFIG_WATCHDOG_NOWAYOUT is not set
 
@@ -696,7 +765,9 @@ CONFIG_WATCHDOG=y
 # Watchdog Device Drivers
 #
 # CONFIG_SOFT_WATCHDOG is not set
-CONFIG_83xx_WDT=y
+# CONFIG_ALIM7101_WDT is not set
+# CONFIG_8xxx_WDT is not set
+# CONFIG_WATCHDOG_RTAS is not set
 
 #
 # PCI-based Watchdog Cards
@@ -713,8 +784,10 @@ CONFIG_SSB_POSSIBLE=y
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
 
 #
 # Multimedia devices
@@ -746,10 +819,6 @@ CONFIG_VIDEO_OUTPUT_CONTROL=m
 # Display device support
 #
 # CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Sound
-#
 # CONFIG_SOUND is not set
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
@@ -764,6 +833,10 @@ CONFIG_USB_ARCH_HAS_EHCI=y
 # CONFIG_USB_OTG_BLACKLIST_HUB is not set
 
 #
+# Enable Host or Gadget support to see Inventra options
+#
+
+#
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
 #
 # CONFIG_USB_GADGET is not set
@@ -802,6 +875,7 @@ CONFIG_RTC_DRV_DS1374=y
 # CONFIG_RTC_DRV_PCF8583 is not set
 # CONFIG_RTC_DRV_M41T80 is not set
 # CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
 
 #
 # SPI RTC drivers
@@ -890,6 +964,7 @@ CONFIG_TMPFS=y
 # CONFIG_CRAMFS is not set
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
 # CONFIG_ROMFS_FS is not set
@@ -900,14 +975,13 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
-# CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_BIND34 is not set
 CONFIG_RPCSEC_GSS_KRB5=y
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -943,6 +1017,7 @@ CONFIG_BITREVERSE=y
 # CONFIG_GENERIC_FIND_FIRST_BIT is not set
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
 # CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
@@ -968,8 +1043,18 @@ CONFIG_FRAME_WARN=1024
 # CONFIG_SLUB_DEBUG_ON is not set
 # CONFIG_SLUB_STATS is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+# CONFIG_FTRACE is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
 # CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_IRQSTACKS is not set
+# CONFIG_BOOTX_TEXT is not set
 # CONFIG_PPC_EARLY_DEBUG is not set
 
 #
@@ -1023,6 +1108,10 @@ CONFIG_CRYPTO_PCBC=m
 # CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=y
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
 # CONFIG_CRYPTO_SHA1 is not set
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
@@ -1055,5 +1144,6 @@ CONFIG_CRYPTO_DES=y
 # CONFIG_CRYPTO_LZO is not set
 CONFIG_CRYPTO_HW=y
 # CONFIG_CRYPTO_DEV_HIFN_795X is not set
+# CONFIG_CRYPTO_DEV_TALITOS is not set
 # CONFIG_PPC_CLOCK is not set
 # CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/83xx/mpc836x_mds_defconfig b/arch/powerpc/configs/83xx/mpc836x_mds_defconfig
index 20fd9f58cf42..e029e9e14622 100644
--- a/arch/powerpc/configs/83xx/mpc836x_mds_defconfig
+++ b/arch/powerpc/configs/83xx/mpc836x_mds_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc5
-# Mon Jun  9 08:52:27 2008
+# Linux kernel version: 2.6.27-rc4
+# Thu Aug 21 00:52:22 2008
 #
 # CONFIG_PPC64 is not set
 
@@ -16,6 +16,7 @@ CONFIG_6xx=y
 # CONFIG_E200 is not set
 CONFIG_PPC_FPU=y
 # CONFIG_FSL_EMB_PERFMON is not set
+# CONFIG_ALTIVEC is not set
 CONFIG_PPC_STD_MMU=y
 CONFIG_PPC_STD_MMU_32=y
 # CONFIG_PPC_MM_SLICES is not set
@@ -32,6 +33,7 @@ CONFIG_GENERIC_HARDIRQS=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
@@ -51,6 +53,9 @@ CONFIG_PPC_UDBG_16550=y
 CONFIG_AUDIT_ARCH=y
 CONFIG_GENERIC_BUG=y
 CONFIG_DEFAULT_UIMAGE=y
+CONFIG_HIBERNATE_32=y
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
@@ -88,12 +93,12 @@ CONFIG_INITRAMFS_SOURCE=""
 CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
 # CONFIG_KALLSYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
+CONFIG_PCSPKR_PLATFORM=y
 CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
@@ -111,10 +116,16 @@ CONFIG_SLUB=y
 # CONFIG_PROFILING is not set
 # CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
+CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
 # CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+# CONFIG_HAVE_CLK is not set
 CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
@@ -125,12 +136,13 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-# CONFIG_KMOD is not set
+CONFIG_KMOD=y
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -149,36 +161,48 @@ CONFIG_CLASSIC_RCU=y
 #
 # Platform support
 #
-# CONFIG_PPC_MULTIPLATFORM is not set
-# CONFIG_PPC_82xx is not set
-CONFIG_PPC_83xx=y
-# CONFIG_PPC_86xx is not set
-# CONFIG_PPC_MPC512x is not set
-# CONFIG_PPC_MPC5121 is not set
+CONFIG_PPC_MULTIPLATFORM=y
+CONFIG_CLASSIC32=y
+CONFIG_PPC_CHRP=y
+# CONFIG_MPC5121_ADS is not set
+# CONFIG_MPC5121_GENERIC is not set
+# CONFIG_PPC_MPC52xx is not set
+CONFIG_PPC_PMAC=y
 # CONFIG_PPC_CELL is not set
 # CONFIG_PPC_CELL_NATIVE is not set
+# CONFIG_PPC_82xx is not set
 # CONFIG_PQ2ADS is not set
-CONFIG_MPC83xx=y
+CONFIG_PPC_83xx=y
 # CONFIG_MPC831x_RDB is not set
 # CONFIG_MPC832x_MDS is not set
 # CONFIG_MPC832x_RDB is not set
 # CONFIG_MPC834x_MDS is not set
 # CONFIG_MPC834x_ITX is not set
 CONFIG_MPC836x_MDS=y
+# CONFIG_MPC836x_RDK is not set
 # CONFIG_MPC837x_MDS is not set
 # CONFIG_MPC837x_RDB is not set
 # CONFIG_SBC834x is not set
+# CONFIG_ASP834x is not set
+# CONFIG_PPC_86xx is not set
+# CONFIG_EMBEDDED6xx is not set
+CONFIG_PPC_NATIVE=y
+# CONFIG_UDBG_RTAS_CONSOLE is not set
 CONFIG_IPIC=y
-# CONFIG_MPIC is not set
+CONFIG_MPIC=y
 # CONFIG_MPIC_WEIRD is not set
-# CONFIG_PPC_I8259 is not set
-# CONFIG_PPC_RTAS is not set
+CONFIG_PPC_I8259=y
+CONFIG_PPC_RTAS=y
+# CONFIG_RTAS_ERROR_LOGGING is not set
+CONFIG_RTAS_PROC=y
 # CONFIG_MMIO_NVRAM is not set
-# CONFIG_PPC_MPC106 is not set
+CONFIG_PPC_MPC106=y
 # CONFIG_PPC_970_NAP is not set
 # CONFIG_PPC_INDIRECT_IO is not set
 # CONFIG_GENERIC_IOMAP is not set
 # CONFIG_CPU_FREQ is not set
+# CONFIG_PPC601_SYNC_FIX is not set
+# CONFIG_TAU is not set
 CONFIG_QUICC_ENGINE=y
 # CONFIG_FSL_ULI1575 is not set
 
@@ -195,7 +219,7 @@ CONFIG_HZ_250=y
 # CONFIG_HZ_300 is not set
 # CONFIG_HZ_1000 is not set
 CONFIG_HZ=250
-# CONFIG_SCHED_HRTICK is not set
+CONFIG_SCHED_HRTICK=y
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
@@ -205,6 +229,7 @@ CONFIG_BINFMT_ELF=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_HAS_WALK_MEMORY=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+# CONFIG_KEXEC is not set
 CONFIG_ARCH_FLATMEM_ENABLE=y
 CONFIG_ARCH_POPULATES_NODE_MAP=y
 CONFIG_SELECT_MEMORY_MODEL=y
@@ -217,6 +242,7 @@ CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_MIGRATION=y
 # CONFIG_RESOURCES_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
@@ -224,6 +250,7 @@ CONFIG_VIRT_TO_BUS=y
 CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
+CONFIG_EXTRA_TARGETS=""
 # CONFIG_PM is not set
 CONFIG_SECCOMP=y
 CONFIG_ISA_DMA_API=y
@@ -231,10 +258,13 @@ CONFIG_ISA_DMA_API=y
 #
 # Bus options
 #
+# CONFIG_ISA is not set
 CONFIG_ZONE_DMA=y
 CONFIG_GENERIC_ISA_DMA=y
 CONFIG_PPC_INDIRECT_PCI=y
 CONFIG_FSL_SOC=y
+CONFIG_FSL_PCI=y
+CONFIG_PPC_PCI_CHOICE=y
 CONFIG_PCI=y
 CONFIG_PCI_DOMAINS=y
 CONFIG_PCI_SYSCALL=y
@@ -259,10 +289,6 @@ CONFIG_PAGE_OFFSET=0xc0000000
 CONFIG_KERNEL_START=0xc0000000
 CONFIG_PHYSICAL_START=0x00000000
 CONFIG_TASK_SIZE=0xc0000000
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -363,6 +389,7 @@ CONFIG_OF_I2C=y
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_FD is not set
+# CONFIG_MAC_FLOPPY is not set
 # CONFIG_BLK_CPQ_DA is not set
 # CONFIG_BLK_CPQ_CISS_DA is not set
 # CONFIG_BLK_DEV_DAC960 is not set
@@ -378,12 +405,14 @@ CONFIG_BLK_DEV_RAM_SIZE=32768
 # CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_PHANTOM is not set
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_HP_ILO is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -460,7 +489,10 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_DC390T is not set
 # CONFIG_SCSI_NSP32 is not set
 # CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_MESH is not set
+# CONFIG_SCSI_MAC53C94 is not set
 # CONFIG_SCSI_SRP is not set
+# CONFIG_SCSI_DH is not set
 # CONFIG_ATA is not set
 # CONFIG_MD is not set
 # CONFIG_FUSION is not set
@@ -468,12 +500,15 @@ CONFIG_SCSI_LOWLEVEL=y
 #
 # IEEE 1394 (FireWire) support
 #
+
+#
+# Enable only one of the two stacks, unless you know what you are doing
+#
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -500,6 +535,8 @@ CONFIG_MARVELL_PHY=y
 # CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
+# CONFIG_MACE is not set
+# CONFIG_BMAC is not set
 # CONFIG_HAPPYMEAL is not set
 # CONFIG_SUNGEM is not set
 # CONFIG_CASSINI is not set
@@ -517,7 +554,6 @@ CONFIG_NETDEV_1000=y
 # CONFIG_DL2K is not set
 # CONFIG_E1000 is not set
 # CONFIG_E1000E is not set
-# CONFIG_E1000E_ENABLED is not set
 # CONFIG_IP1000 is not set
 # CONFIG_IGB is not set
 # CONFIG_NS83820 is not set
@@ -532,12 +568,13 @@ CONFIG_NETDEV_1000=y
 # CONFIG_BNX2 is not set
 # CONFIG_GIANFAR is not set
 CONFIG_UCC_GETH=y
-# CONFIG_UGETH_NAPI is not set
 # CONFIG_UGETH_MAGIC_PACKET is not set
 # CONFIG_UGETH_FILTERING is not set
 # CONFIG_UGETH_TX_ON_DEMAND is not set
+# CONFIG_MV643XX_ETH is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
+# CONFIG_ATL1E is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
 # CONFIG_CHELSIO_T3 is not set
@@ -626,12 +663,15 @@ CONFIG_SERIAL_8250_RUNTIME_UARTS=4
 # CONFIG_SERIAL_UARTLITE is not set
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_PMACZILOG is not set
 # CONFIG_SERIAL_JSM is not set
 # CONFIG_SERIAL_OF_PLATFORM is not set
 # CONFIG_SERIAL_QE is not set
 CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_BRIQ_PANEL is not set
+# CONFIG_HVC_RTAS is not set
 # CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
 # CONFIG_NVRAM is not set
@@ -643,42 +683,69 @@ CONFIG_DEVPORT=y
 CONFIG_I2C=y
 CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
 
 #
 # I2C Hardware Bus support
 #
+
+#
+# PC SMBus host controller drivers
+#
 # CONFIG_I2C_ALI1535 is not set
 # CONFIG_I2C_ALI1563 is not set
 # CONFIG_I2C_ALI15X3 is not set
 # CONFIG_I2C_AMD756 is not set
 # CONFIG_I2C_AMD8111 is not set
 # CONFIG_I2C_I801 is not set
-# CONFIG_I2C_I810 is not set
+# CONFIG_I2C_ISCH is not set
 # CONFIG_I2C_PIIX4 is not set
-CONFIG_I2C_MPC=y
 # CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_PROSAVAGE is not set
-# CONFIG_I2C_SAVAGE4 is not set
-# CONFIG_I2C_SIMTEC is not set
 # CONFIG_I2C_SIS5595 is not set
 # CONFIG_I2C_SIS630 is not set
 # CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_STUB is not set
 # CONFIG_I2C_VIA is not set
 # CONFIG_I2C_VIAPRO is not set
+
+#
+# Mac SMBus host controller drivers
+#
+# CONFIG_I2C_HYDRA is not set
+CONFIG_I2C_POWERMAC=y
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+CONFIG_I2C_MPC=y
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+
+#
+# Graphics adapter I2C/DDC channel drivers
+#
 # CONFIG_I2C_VOODOO3 is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
 # CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
 
 #
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
+# CONFIG_AT24 is not set
 # CONFIG_SENSORS_EEPROM is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
@@ -687,10 +754,13 @@ CONFIG_I2C_MPC=y
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
 # CONFIG_SPI is not set
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+# CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 CONFIG_HWMON=y
 # CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_AD7414 is not set
 # CONFIG_SENSORS_AD7418 is not set
 # CONFIG_SENSORS_ADM1021 is not set
 # CONFIG_SENSORS_ADM1025 is not set
@@ -700,6 +770,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_ADM9240 is not set
 # CONFIG_SENSORS_ADT7470 is not set
 # CONFIG_SENSORS_ADT7473 is not set
+# CONFIG_SENSORS_AMS is not set
 # CONFIG_SENSORS_ATXP1 is not set
 # CONFIG_SENSORS_DS1621 is not set
 # CONFIG_SENSORS_I5K_AMB is not set
@@ -744,6 +815,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_W83627EHF is not set
 # CONFIG_HWMON_DEBUG_CHIP is not set
 # CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
 CONFIG_WATCHDOG=y
 # CONFIG_WATCHDOG_NOWAYOUT is not set
 
@@ -751,7 +823,9 @@ CONFIG_WATCHDOG=y
 # Watchdog Device Drivers
 #
 # CONFIG_SOFT_WATCHDOG is not set
-CONFIG_83xx_WDT=y
+# CONFIG_ALIM7101_WDT is not set
+# CONFIG_8xxx_WDT is not set
+# CONFIG_WATCHDOG_RTAS is not set
 
 #
 # PCI-based Watchdog Cards
@@ -768,8 +842,10 @@ CONFIG_SSB_POSSIBLE=y
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
 
 #
 # Multimedia devices
@@ -801,10 +877,6 @@ CONFIG_VIDEO_OUTPUT_CONTROL=m
 # Display device support
 #
 # CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Sound
-#
 # CONFIG_SOUND is not set
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
@@ -819,6 +891,10 @@ CONFIG_USB_ARCH_HAS_EHCI=y
 # CONFIG_USB_OTG_BLACKLIST_HUB is not set
 
 #
+# Enable Host or Gadget support to see Inventra options
+#
+
+#
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
 #
 # CONFIG_USB_GADGET is not set
@@ -857,6 +933,7 @@ CONFIG_RTC_DRV_DS1374=y
 # CONFIG_RTC_DRV_PCF8583 is not set
 # CONFIG_RTC_DRV_M41T80 is not set
 # CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
 
 #
 # SPI RTC drivers
@@ -945,6 +1022,7 @@ CONFIG_TMPFS=y
 # CONFIG_CRAMFS is not set
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
 # CONFIG_ROMFS_FS is not set
@@ -955,14 +1033,13 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
-# CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_BIND34 is not set
 CONFIG_RPCSEC_GSS_KRB5=y
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -992,6 +1069,7 @@ CONFIG_PARTITION_ADVANCED=y
 # CONFIG_DLM is not set
 CONFIG_UCC_FAST=y
 CONFIG_UCC=y
+# CONFIG_QE_GPIO is not set
 
 #
 # Library routines
@@ -1000,6 +1078,7 @@ CONFIG_BITREVERSE=y
 # CONFIG_GENERIC_FIND_FIRST_BIT is not set
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
 # CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
@@ -1025,8 +1104,18 @@ CONFIG_FRAME_WARN=1024
 # CONFIG_SLUB_DEBUG_ON is not set
 # CONFIG_SLUB_STATS is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+# CONFIG_FTRACE is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
 # CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_IRQSTACKS is not set
+# CONFIG_BOOTX_TEXT is not set
 # CONFIG_PPC_EARLY_DEBUG is not set
 
 #
@@ -1080,6 +1169,10 @@ CONFIG_CRYPTO_PCBC=m
 # CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=y
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
 # CONFIG_CRYPTO_SHA1 is not set
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
@@ -1112,6 +1205,7 @@ CONFIG_CRYPTO_DES=y
 # CONFIG_CRYPTO_LZO is not set
 CONFIG_CRYPTO_HW=y
 # CONFIG_CRYPTO_DEV_HIFN_795X is not set
+# CONFIG_CRYPTO_DEV_TALITOS is not set
 # CONFIG_PPC_CLOCK is not set
 CONFIG_PPC_LIB_RHEAP=y
 # CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/83xx/mpc836x_rdk_defconfig b/arch/powerpc/configs/83xx/mpc836x_rdk_defconfig
index d2c435f0da42..7d674be702fe 100644
--- a/arch/powerpc/configs/83xx/mpc836x_rdk_defconfig
+++ b/arch/powerpc/configs/83xx/mpc836x_rdk_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc2
-# Mon May 19 21:12:32 2008
+# Linux kernel version: 2.6.27-rc4
+# Thu Aug 21 00:52:24 2008
 #
 # CONFIG_PPC64 is not set
 
@@ -16,6 +16,7 @@ CONFIG_6xx=y
 # CONFIG_E200 is not set
 CONFIG_PPC_FPU=y
 # CONFIG_FSL_EMB_PERFMON is not set
+# CONFIG_ALTIVEC is not set
 CONFIG_PPC_STD_MMU=y
 CONFIG_PPC_STD_MMU_32=y
 # CONFIG_PPC_MM_SLICES is not set
@@ -32,6 +33,7 @@ CONFIG_GENERIC_HARDIRQS=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
@@ -52,6 +54,9 @@ CONFIG_PPC_UDBG_16550=y
 CONFIG_AUDIT_ARCH=y
 CONFIG_GENERIC_BUG=y
 CONFIG_DEFAULT_UIMAGE=y
+CONFIG_HIBERNATE_32=y
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
@@ -89,12 +94,12 @@ CONFIG_INITRAMFS_SOURCE=""
 CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
 # CONFIG_KALLSYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
+CONFIG_PCSPKR_PLATFORM=y
 CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
@@ -112,10 +117,16 @@ CONFIG_SLUB=y
 # CONFIG_PROFILING is not set
 # CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
+CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
 # CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+# CONFIG_HAVE_CLK is not set
 CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
@@ -126,12 +137,13 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-# CONFIG_KMOD is not set
+CONFIG_KMOD=y
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -150,16 +162,18 @@ CONFIG_CLASSIC_RCU=y
 #
 # Platform support
 #
-# CONFIG_PPC_MULTIPLATFORM is not set
-# CONFIG_PPC_82xx is not set
-CONFIG_PPC_83xx=y
-# CONFIG_PPC_86xx is not set
-# CONFIG_PPC_MPC512x is not set
-# CONFIG_PPC_MPC5121 is not set
+CONFIG_PPC_MULTIPLATFORM=y
+CONFIG_CLASSIC32=y
+CONFIG_PPC_CHRP=y
+# CONFIG_MPC5121_ADS is not set
+# CONFIG_MPC5121_GENERIC is not set
+# CONFIG_PPC_MPC52xx is not set
+CONFIG_PPC_PMAC=y
 # CONFIG_PPC_CELL is not set
 # CONFIG_PPC_CELL_NATIVE is not set
+# CONFIG_PPC_82xx is not set
 # CONFIG_PQ2ADS is not set
-CONFIG_MPC83xx=y
+CONFIG_PPC_83xx=y
 # CONFIG_MPC831x_RDB is not set
 # CONFIG_MPC832x_MDS is not set
 # CONFIG_MPC832x_RDB is not set
@@ -170,17 +184,26 @@ CONFIG_MPC836x_RDK=y
 # CONFIG_MPC837x_MDS is not set
 # CONFIG_MPC837x_RDB is not set
 # CONFIG_SBC834x is not set
+# CONFIG_ASP834x is not set
+# CONFIG_PPC_86xx is not set
+# CONFIG_EMBEDDED6xx is not set
+CONFIG_PPC_NATIVE=y
+# CONFIG_UDBG_RTAS_CONSOLE is not set
 CONFIG_IPIC=y
-# CONFIG_MPIC is not set
+CONFIG_MPIC=y
 # CONFIG_MPIC_WEIRD is not set
-# CONFIG_PPC_I8259 is not set
-# CONFIG_PPC_RTAS is not set
+CONFIG_PPC_I8259=y
+CONFIG_PPC_RTAS=y
+# CONFIG_RTAS_ERROR_LOGGING is not set
+CONFIG_RTAS_PROC=y
 # CONFIG_MMIO_NVRAM is not set
-# CONFIG_PPC_MPC106 is not set
+CONFIG_PPC_MPC106=y
 # CONFIG_PPC_970_NAP is not set
 # CONFIG_PPC_INDIRECT_IO is not set
 # CONFIG_GENERIC_IOMAP is not set
 # CONFIG_CPU_FREQ is not set
+# CONFIG_PPC601_SYNC_FIX is not set
+# CONFIG_TAU is not set
 CONFIG_QUICC_ENGINE=y
 # CONFIG_FSL_ULI1575 is not set
 
@@ -207,6 +230,7 @@ CONFIG_BINFMT_ELF=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_HAS_WALK_MEMORY=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+# CONFIG_KEXEC is not set
 CONFIG_ARCH_FLATMEM_ENABLE=y
 CONFIG_ARCH_POPULATES_NODE_MAP=y
 CONFIG_SELECT_MEMORY_MODEL=y
@@ -219,6 +243,7 @@ CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_MIGRATION=y
 # CONFIG_RESOURCES_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
@@ -226,6 +251,7 @@ CONFIG_VIRT_TO_BUS=y
 CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
+CONFIG_EXTRA_TARGETS=""
 # CONFIG_PM is not set
 CONFIG_SECCOMP=y
 CONFIG_ISA_DMA_API=y
@@ -233,12 +259,15 @@ CONFIG_ISA_DMA_API=y
 #
 # Bus options
 #
+# CONFIG_ISA is not set
 CONFIG_ZONE_DMA=y
 CONFIG_GENERIC_ISA_DMA=y
 CONFIG_PPC_INDIRECT_PCI=y
 CONFIG_FSL_SOC=y
+CONFIG_FSL_PCI=y
 CONFIG_FSL_LBC=y
 CONFIG_FSL_GTM=y
+CONFIG_PPC_PCI_CHOICE=y
 CONFIG_PCI=y
 CONFIG_PCI_DOMAINS=y
 CONFIG_PCI_SYSCALL=y
@@ -263,10 +292,6 @@ CONFIG_PAGE_OFFSET=0xc0000000
 CONFIG_KERNEL_START=0xc0000000
 CONFIG_PHYSICAL_START=0x00000000
 CONFIG_TASK_SIZE=0xc0000000
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -359,6 +384,8 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_SYS_HYPERVISOR is not set
 # CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
@@ -449,9 +476,11 @@ CONFIG_MTD_PHYSMAP_OF=y
 CONFIG_OF_DEVICE=y
 CONFIG_OF_GPIO=y
 CONFIG_OF_I2C=y
+CONFIG_OF_SPI=y
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_FD is not set
+# CONFIG_MAC_FLOPPY is not set
 # CONFIG_BLK_CPQ_DA is not set
 # CONFIG_BLK_CPQ_CISS_DA is not set
 # CONFIG_BLK_DEV_DAC960 is not set
@@ -467,12 +496,14 @@ CONFIG_BLK_DEV_RAM_SIZE=32768
 # CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_PHANTOM is not set
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_HP_ILO is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -490,12 +521,15 @@ CONFIG_HAVE_IDE=y
 #
 # IEEE 1394 (FireWire) support
 #
+
+#
+# Enable only one of the two stacks, unless you know what you are doing
+#
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -526,7 +560,6 @@ CONFIG_NETDEV_1000=y
 # CONFIG_DL2K is not set
 # CONFIG_E1000 is not set
 # CONFIG_E1000E is not set
-# CONFIG_E1000E_ENABLED is not set
 # CONFIG_IP1000 is not set
 # CONFIG_IGB is not set
 # CONFIG_NS83820 is not set
@@ -541,12 +574,13 @@ CONFIG_NETDEV_1000=y
 # CONFIG_BNX2 is not set
 # CONFIG_GIANFAR is not set
 CONFIG_UCC_GETH=y
-CONFIG_UGETH_NAPI=y
 # CONFIG_UGETH_MAGIC_PACKET is not set
 # CONFIG_UGETH_FILTERING is not set
 # CONFIG_UGETH_TX_ON_DEMAND is not set
+# CONFIG_MV643XX_ETH is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
+# CONFIG_ATL1E is not set
 # CONFIG_NETDEV_10000 is not set
 # CONFIG_TR is not set
 
@@ -602,6 +636,7 @@ CONFIG_INPUT=y
 # Character devices
 #
 CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
 # CONFIG_VT_HW_CONSOLE_BINDING is not set
@@ -625,12 +660,15 @@ CONFIG_SERIAL_8250_RUNTIME_UARTS=4
 # CONFIG_SERIAL_UARTLITE is not set
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_PMACZILOG is not set
 # CONFIG_SERIAL_JSM is not set
 # CONFIG_SERIAL_OF_PLATFORM is not set
 CONFIG_SERIAL_QE=y
 CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_BRIQ_PANEL is not set
+# CONFIG_HVC_RTAS is not set
 # CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
 # CONFIG_NVRAM is not set
@@ -643,43 +681,70 @@ CONFIG_DEVPORT=y
 CONFIG_I2C=y
 CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
 
 #
 # I2C Hardware Bus support
 #
+
+#
+# PC SMBus host controller drivers
+#
 # CONFIG_I2C_ALI1535 is not set
 # CONFIG_I2C_ALI1563 is not set
 # CONFIG_I2C_ALI15X3 is not set
 # CONFIG_I2C_AMD756 is not set
 # CONFIG_I2C_AMD8111 is not set
-# CONFIG_I2C_GPIO is not set
 # CONFIG_I2C_I801 is not set
-# CONFIG_I2C_I810 is not set
+# CONFIG_I2C_ISCH is not set
 # CONFIG_I2C_PIIX4 is not set
-CONFIG_I2C_MPC=y
 # CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_PROSAVAGE is not set
-# CONFIG_I2C_SAVAGE4 is not set
-# CONFIG_I2C_SIMTEC is not set
 # CONFIG_I2C_SIS5595 is not set
 # CONFIG_I2C_SIS630 is not set
 # CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_STUB is not set
 # CONFIG_I2C_VIA is not set
 # CONFIG_I2C_VIAPRO is not set
+
+#
+# Mac SMBus host controller drivers
+#
+# CONFIG_I2C_HYDRA is not set
+CONFIG_I2C_POWERMAC=y
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+# CONFIG_I2C_GPIO is not set
+CONFIG_I2C_MPC=y
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+
+#
+# Graphics adapter I2C/DDC channel drivers
+#
 # CONFIG_I2C_VOODOO3 is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
 # CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
 
 #
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
+# CONFIG_AT24 is not set
 # CONFIG_SENSORS_EEPROM is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_TPS65010 is not set
 # CONFIG_SENSORS_MAX6875 is not set
@@ -703,26 +768,33 @@ CONFIG_SPI_MPC83xx=y
 # CONFIG_SPI_AT25 is not set
 CONFIG_SPI_SPIDEV=y
 # CONFIG_SPI_TLE62X0 is not set
-CONFIG_HAVE_GPIO_LIB=y
-
-#
-# GPIO Support
-#
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_GPIO_SYSFS is not set
 
 #
 # I2C GPIO expanders:
 #
+# CONFIG_GPIO_MAX732X is not set
 # CONFIG_GPIO_PCA953X is not set
 # CONFIG_GPIO_PCF857X is not set
 
 #
+# PCI GPIO expanders:
+#
+# CONFIG_GPIO_BT8XX is not set
+
+#
 # SPI GPIO expanders:
 #
+# CONFIG_GPIO_MAX7301 is not set
 # CONFIG_GPIO_MCP23S08 is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 # CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
 CONFIG_WATCHDOG=y
 # CONFIG_WATCHDOG_NOWAYOUT is not set
 
@@ -730,7 +802,9 @@ CONFIG_WATCHDOG=y
 # Watchdog Device Drivers
 #
 # CONFIG_SOFT_WATCHDOG is not set
-CONFIG_83xx_WDT=y
+# CONFIG_ALIM7101_WDT is not set
+# CONFIG_8xxx_WDT is not set
+# CONFIG_WATCHDOG_RTAS is not set
 
 #
 # PCI-based Watchdog Cards
@@ -747,9 +821,10 @@ CONFIG_SSB_POSSIBLE=y
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
-# CONFIG_HTC_EGPIO is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
 
 #
 # Multimedia devices
@@ -799,6 +874,9 @@ CONFIG_FB_MACMODES=y
 # CONFIG_FB_PM2 is not set
 # CONFIG_FB_CYBER2000 is not set
 CONFIG_FB_OF=y
+# CONFIG_FB_CONTROL is not set
+# CONFIG_FB_PLATINUM is not set
+# CONFIG_FB_VALKYRIE is not set
 # CONFIG_FB_CT65550 is not set
 # CONFIG_FB_ASILIANT is not set
 # CONFIG_FB_IMSTT is not set
@@ -821,6 +899,7 @@ CONFIG_FB_OF=y
 # CONFIG_FB_TRIDENT is not set
 # CONFIG_FB_ARK is not set
 # CONFIG_FB_PM3 is not set
+# CONFIG_FB_CARMINE is not set
 # CONFIG_FB_FSL_DIU is not set
 # CONFIG_FB_IBM_GXT4500 is not set
 # CONFIG_FB_VIRTUAL is not set
@@ -846,10 +925,6 @@ CONFIG_LOGO=y
 # CONFIG_LOGO_LINUX_MONO is not set
 CONFIG_LOGO_LINUX_VGA16=y
 CONFIG_LOGO_LINUX_CLUT224=y
-
-#
-# Sound
-#
 # CONFIG_SOUND is not set
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
@@ -941,6 +1016,7 @@ CONFIG_JFFS2_RTIME=y
 # CONFIG_CRAMFS is not set
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
 # CONFIG_ROMFS_FS is not set
@@ -951,14 +1027,13 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
-# CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_BIND34 is not set
 CONFIG_RPCSEC_GSS_KRB5=y
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -998,6 +1073,7 @@ CONFIG_BITREVERSE=y
 # CONFIG_GENERIC_FIND_FIRST_BIT is not set
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
 # CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
@@ -1025,12 +1101,22 @@ CONFIG_FRAME_WARN=1024
 # CONFIG_SLUB_DEBUG_ON is not set
 # CONFIG_SLUB_STATS is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+# CONFIG_FTRACE is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
 # CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_IRQSTACKS is not set
+# CONFIG_BOOTX_TEXT is not set
 CONFIG_PPC_EARLY_DEBUG=y
 # CONFIG_PPC_EARLY_DEBUG_LPAR is not set
 # CONFIG_PPC_EARLY_DEBUG_G5 is not set
-# CONFIG_PPC_EARLY_DEBUG_RTAS_PANEL is not set
+CONFIG_PPC_EARLY_DEBUG_RTAS_PANEL=y
 # CONFIG_PPC_EARLY_DEBUG_RTAS_CONSOLE is not set
 # CONFIG_PPC_EARLY_DEBUG_MAPLE is not set
 # CONFIG_PPC_EARLY_DEBUG_ISERIES is not set
@@ -1091,6 +1177,10 @@ CONFIG_CRYPTO_CBC=y
 # CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=y
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
 # CONFIG_CRYPTO_SHA1 is not set
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
@@ -1123,6 +1213,7 @@ CONFIG_CRYPTO_DES=y
 # CONFIG_CRYPTO_LZO is not set
 CONFIG_CRYPTO_HW=y
 # CONFIG_CRYPTO_DEV_HIFN_795X is not set
+# CONFIG_CRYPTO_DEV_TALITOS is not set
 # CONFIG_PPC_CLOCK is not set
 CONFIG_PPC_LIB_RHEAP=y
 # CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/83xx/mpc837x_mds_defconfig b/arch/powerpc/configs/83xx/mpc837x_mds_defconfig
index 0f94d9f56beb..de472022aa81 100644
--- a/arch/powerpc/configs/83xx/mpc837x_mds_defconfig
+++ b/arch/powerpc/configs/83xx/mpc837x_mds_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc5
-# Mon Jun  9 08:52:28 2008
+# Linux kernel version: 2.6.27-rc4
+# Thu Aug 21 00:52:23 2008
 #
 # CONFIG_PPC64 is not set
 
@@ -16,6 +16,7 @@ CONFIG_6xx=y
 # CONFIG_E200 is not set
 CONFIG_PPC_FPU=y
 # CONFIG_FSL_EMB_PERFMON is not set
+# CONFIG_ALTIVEC is not set
 CONFIG_PPC_STD_MMU=y
 CONFIG_PPC_STD_MMU_32=y
 # CONFIG_PPC_MM_SLICES is not set
@@ -32,6 +33,7 @@ CONFIG_GENERIC_HARDIRQS=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
@@ -51,6 +53,9 @@ CONFIG_PPC_UDBG_16550=y
 CONFIG_AUDIT_ARCH=y
 CONFIG_GENERIC_BUG=y
 CONFIG_DEFAULT_UIMAGE=y
+CONFIG_HIBERNATE_32=y
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
@@ -88,13 +93,13 @@ CONFIG_INITRAMFS_SOURCE=""
 CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
+CONFIG_PCSPKR_PLATFORM=y
 CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
@@ -112,10 +117,16 @@ CONFIG_SLAB=y
 # CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
+CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
 # CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+# CONFIG_HAVE_CLK is not set
 CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
@@ -126,12 +137,13 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-# CONFIG_KMOD is not set
+CONFIG_KMOD=y
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -150,37 +162,49 @@ CONFIG_CLASSIC_RCU=y
 #
 # Platform support
 #
-# CONFIG_PPC_MULTIPLATFORM is not set
-# CONFIG_PPC_82xx is not set
-CONFIG_PPC_83xx=y
-# CONFIG_PPC_86xx is not set
-# CONFIG_PPC_MPC512x is not set
-# CONFIG_PPC_MPC5121 is not set
+CONFIG_PPC_MULTIPLATFORM=y
+CONFIG_CLASSIC32=y
+CONFIG_PPC_CHRP=y
+# CONFIG_MPC5121_ADS is not set
+# CONFIG_MPC5121_GENERIC is not set
+# CONFIG_PPC_MPC52xx is not set
+CONFIG_PPC_PMAC=y
 # CONFIG_PPC_CELL is not set
 # CONFIG_PPC_CELL_NATIVE is not set
+# CONFIG_PPC_82xx is not set
 # CONFIG_PQ2ADS is not set
-CONFIG_MPC83xx=y
+CONFIG_PPC_83xx=y
 # CONFIG_MPC831x_RDB is not set
 # CONFIG_MPC832x_MDS is not set
 # CONFIG_MPC832x_RDB is not set
 # CONFIG_MPC834x_MDS is not set
 # CONFIG_MPC834x_ITX is not set
 # CONFIG_MPC836x_MDS is not set
+# CONFIG_MPC836x_RDK is not set
 CONFIG_MPC837x_MDS=y
 # CONFIG_MPC837x_RDB is not set
 # CONFIG_SBC834x is not set
+# CONFIG_ASP834x is not set
 CONFIG_PPC_MPC837x=y
+# CONFIG_PPC_86xx is not set
+# CONFIG_EMBEDDED6xx is not set
+CONFIG_PPC_NATIVE=y
+# CONFIG_UDBG_RTAS_CONSOLE is not set
 CONFIG_IPIC=y
-# CONFIG_MPIC is not set
+CONFIG_MPIC=y
 # CONFIG_MPIC_WEIRD is not set
-# CONFIG_PPC_I8259 is not set
-# CONFIG_PPC_RTAS is not set
+CONFIG_PPC_I8259=y
+CONFIG_PPC_RTAS=y
+# CONFIG_RTAS_ERROR_LOGGING is not set
+CONFIG_RTAS_PROC=y
 # CONFIG_MMIO_NVRAM is not set
-# CONFIG_PPC_MPC106 is not set
+CONFIG_PPC_MPC106=y
 # CONFIG_PPC_970_NAP is not set
 # CONFIG_PPC_INDIRECT_IO is not set
 # CONFIG_GENERIC_IOMAP is not set
 # CONFIG_CPU_FREQ is not set
+# CONFIG_PPC601_SYNC_FIX is not set
+# CONFIG_TAU is not set
 # CONFIG_FSL_ULI1575 is not set
 
 #
@@ -206,6 +230,7 @@ CONFIG_BINFMT_ELF=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_HAS_WALK_MEMORY=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+# CONFIG_KEXEC is not set
 CONFIG_ARCH_FLATMEM_ENABLE=y
 CONFIG_ARCH_POPULATES_NODE_MAP=y
 CONFIG_SELECT_MEMORY_MODEL=y
@@ -218,6 +243,7 @@ CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_MIGRATION=y
 # CONFIG_RESOURCES_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
@@ -225,6 +251,7 @@ CONFIG_VIRT_TO_BUS=y
 CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
+CONFIG_EXTRA_TARGETS=""
 # CONFIG_PM is not set
 CONFIG_SECCOMP=y
 CONFIG_ISA_DMA_API=y
@@ -232,15 +259,22 @@ CONFIG_ISA_DMA_API=y
 #
 # Bus options
 #
+# CONFIG_ISA is not set
 CONFIG_ZONE_DMA=y
 CONFIG_GENERIC_ISA_DMA=y
 CONFIG_PPC_INDIRECT_PCI=y
 CONFIG_FSL_SOC=y
-# CONFIG_PCI is not set
-# CONFIG_PCI_DOMAINS is not set
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
+CONFIG_FSL_PCI=y
+CONFIG_PPC_PCI_CHOICE=y
+CONFIG_PCI=y
+CONFIG_PCI_DOMAINS=y
+CONFIG_PCI_SYSCALL=y
+# CONFIG_PCIEPORTBUS is not set
+CONFIG_ARCH_SUPPORTS_MSI=y
+# CONFIG_PCI_MSI is not set
+CONFIG_PCI_LEGACY=y
 # CONFIG_PCCARD is not set
+# CONFIG_HOTPLUG_PCI is not set
 # CONFIG_HAS_RAPIDIO is not set
 
 #
@@ -256,10 +290,6 @@ CONFIG_PAGE_OFFSET=0xc0000000
 CONFIG_KERNEL_START=0xc0000000
 CONFIG_PHYSICAL_START=0x00000000
 CONFIG_TASK_SIZE=0xc0000000
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -360,19 +390,30 @@ CONFIG_OF_I2C=y
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_FD is not set
+# CONFIG_MAC_FLOPPY is not set
+# CONFIG_BLK_CPQ_DA is not set
+# CONFIG_BLK_CPQ_CISS_DA is not set
+# CONFIG_BLK_DEV_DAC960 is not set
+# CONFIG_BLK_DEV_UMEM is not set
 # CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
 # CONFIG_BLK_DEV_CRYPTOLOOP is not set
 # CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_SX8 is not set
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=32768
 # CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
+# CONFIG_PHANTOM is not set
 # CONFIG_EEPROM_93CX6 is not set
+# CONFIG_SGI_IOC4 is not set
+# CONFIG_TIFM_CORE is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_HP_ILO is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -415,24 +456,128 @@ CONFIG_SCSI_WAIT_SCAN=m
 # CONFIG_SCSI_SRP_ATTRS is not set
 CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_ISCSI_TCP is not set
+# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
+# CONFIG_SCSI_3W_9XXX is not set
+# CONFIG_SCSI_ACARD is not set
+# CONFIG_SCSI_AACRAID is not set
+# CONFIG_SCSI_AIC7XXX is not set
+# CONFIG_SCSI_AIC7XXX_OLD is not set
+# CONFIG_SCSI_AIC79XX is not set
+# CONFIG_SCSI_AIC94XX is not set
+# CONFIG_SCSI_DPT_I2O is not set
+# CONFIG_SCSI_ADVANSYS is not set
+# CONFIG_SCSI_ARCMSR is not set
+# CONFIG_MEGARAID_NEWGEN is not set
+# CONFIG_MEGARAID_LEGACY is not set
+# CONFIG_MEGARAID_SAS is not set
+# CONFIG_SCSI_HPTIOP is not set
+# CONFIG_SCSI_BUSLOGIC is not set
+# CONFIG_SCSI_DMX3191D is not set
+# CONFIG_SCSI_EATA is not set
+# CONFIG_SCSI_FUTURE_DOMAIN is not set
+# CONFIG_SCSI_GDTH is not set
+# CONFIG_SCSI_IPS is not set
+# CONFIG_SCSI_INITIO is not set
+# CONFIG_SCSI_INIA100 is not set
+# CONFIG_SCSI_MVSAS is not set
+# CONFIG_SCSI_STEX is not set
+# CONFIG_SCSI_SYM53C8XX_2 is not set
+# CONFIG_SCSI_IPR is not set
+# CONFIG_SCSI_QLOGIC_1280 is not set
+# CONFIG_SCSI_QLA_FC is not set
+# CONFIG_SCSI_QLA_ISCSI is not set
+# CONFIG_SCSI_LPFC is not set
+# CONFIG_SCSI_DC395x is not set
+# CONFIG_SCSI_DC390T is not set
+# CONFIG_SCSI_NSP32 is not set
 # CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_MESH is not set
+# CONFIG_SCSI_MAC53C94 is not set
+# CONFIG_SCSI_SRP is not set
+# CONFIG_SCSI_DH is not set
 CONFIG_ATA=y
 # CONFIG_ATA_NONSTANDARD is not set
 CONFIG_SATA_PMP=y
+# CONFIG_SATA_AHCI is not set
+# CONFIG_SATA_SIL24 is not set
 CONFIG_SATA_FSL=y
 CONFIG_ATA_SFF=y
+# CONFIG_SATA_SVW is not set
+# CONFIG_ATA_PIIX is not set
 # CONFIG_SATA_MV is not set
+# CONFIG_SATA_NV is not set
+# CONFIG_PDC_ADMA is not set
+# CONFIG_SATA_QSTOR is not set
+# CONFIG_SATA_PROMISE is not set
+# CONFIG_SATA_SX4 is not set
+# CONFIG_SATA_SIL is not set
+# CONFIG_SATA_SIS is not set
+# CONFIG_SATA_ULI is not set
+# CONFIG_SATA_VIA is not set
+# CONFIG_SATA_VITESSE is not set
+# CONFIG_SATA_INIC162X is not set
+# CONFIG_PATA_ALI is not set
+# CONFIG_PATA_AMD is not set
+# CONFIG_PATA_ARTOP is not set
+# CONFIG_PATA_ATIIXP is not set
+# CONFIG_PATA_CMD640_PCI is not set
+# CONFIG_PATA_CMD64X is not set
+# CONFIG_PATA_CS5520 is not set
+# CONFIG_PATA_CS5530 is not set
+# CONFIG_PATA_CYPRESS is not set
+# CONFIG_PATA_EFAR is not set
+# CONFIG_ATA_GENERIC is not set
+# CONFIG_PATA_HPT366 is not set
+# CONFIG_PATA_HPT37X is not set
+# CONFIG_PATA_HPT3X2N is not set
+# CONFIG_PATA_HPT3X3 is not set
+# CONFIG_PATA_IT821X is not set
+# CONFIG_PATA_IT8213 is not set
+# CONFIG_PATA_JMICRON is not set
+# CONFIG_PATA_TRIFLEX is not set
+# CONFIG_PATA_MARVELL is not set
+# CONFIG_PATA_MPIIX is not set
+# CONFIG_PATA_OLDPIIX is not set
+# CONFIG_PATA_NETCELL is not set
+# CONFIG_PATA_NINJA32 is not set
+# CONFIG_PATA_NS87410 is not set
+# CONFIG_PATA_NS87415 is not set
+# CONFIG_PATA_OPTI is not set
+# CONFIG_PATA_OPTIDMA is not set
+# CONFIG_PATA_PDC_OLD is not set
+# CONFIG_PATA_RADISYS is not set
+# CONFIG_PATA_RZ1000 is not set
+# CONFIG_PATA_SC1200 is not set
+# CONFIG_PATA_SERVERWORKS is not set
+# CONFIG_PATA_PDC2027X is not set
+# CONFIG_PATA_SIL680 is not set
+# CONFIG_PATA_SIS is not set
+# CONFIG_PATA_VIA is not set
+# CONFIG_PATA_WINBOND is not set
 # CONFIG_PATA_PLATFORM is not set
+# CONFIG_PATA_SCH is not set
 # CONFIG_MD is not set
+# CONFIG_FUSION is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+
+#
+# Enable only one of the two stacks, unless you know what you are doing
+#
+# CONFIG_FIREWIRE is not set
+# CONFIG_IEEE1394 is not set
+# CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
 # CONFIG_EQUALIZER is not set
 # CONFIG_TUN is not set
 # CONFIG_VETH is not set
+# CONFIG_ARCNET is not set
 CONFIG_PHYLIB=y
 
 #
@@ -452,16 +597,56 @@ CONFIG_MARVELL_PHY=y
 # CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
+# CONFIG_MACE is not set
+# CONFIG_BMAC is not set
+# CONFIG_HAPPYMEAL is not set
+# CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
+# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_NET_TULIP is not set
+# CONFIG_HP100 is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
 # CONFIG_IBM_NEW_EMAC_RGMII is not set
 # CONFIG_IBM_NEW_EMAC_TAH is not set
 # CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_NET_PCI is not set
 # CONFIG_B44 is not set
 CONFIG_NETDEV_1000=y
-# CONFIG_E1000E_ENABLED is not set
+# CONFIG_ACENIC is not set
+# CONFIG_DL2K is not set
+# CONFIG_E1000 is not set
+# CONFIG_E1000E is not set
+# CONFIG_IP1000 is not set
+# CONFIG_IGB is not set
+# CONFIG_NS83820 is not set
+# CONFIG_HAMACHI is not set
+# CONFIG_YELLOWFIN is not set
+# CONFIG_R8169 is not set
+# CONFIG_SIS190 is not set
+# CONFIG_SKGE is not set
+# CONFIG_SKY2 is not set
+# CONFIG_VIA_VELOCITY is not set
+# CONFIG_TIGON3 is not set
+# CONFIG_BNX2 is not set
 CONFIG_GIANFAR=y
-# CONFIG_GFAR_NAPI is not set
+# CONFIG_MV643XX_ETH is not set
+# CONFIG_QLA3XXX is not set
+# CONFIG_ATL1 is not set
+# CONFIG_ATL1E is not set
 CONFIG_NETDEV_10000=y
+# CONFIG_CHELSIO_T1 is not set
+# CONFIG_CHELSIO_T3 is not set
+# CONFIG_IXGBE is not set
+# CONFIG_IXGB is not set
+# CONFIG_S2IO is not set
+# CONFIG_MYRI10GE is not set
+# CONFIG_NETXEN_NIC is not set
+# CONFIG_NIU is not set
+# CONFIG_MLX4_CORE is not set
+# CONFIG_TEHUTI is not set
+# CONFIG_BNX2X is not set
+# CONFIG_SFC is not set
+# CONFIG_TR is not set
 
 #
 # Wireless LAN
@@ -470,8 +655,11 @@ CONFIG_NETDEV_10000=y
 # CONFIG_WLAN_80211 is not set
 # CONFIG_IWLWIFI_LEDS is not set
 # CONFIG_WAN is not set
+# CONFIG_FDDI is not set
+# CONFIG_HIPPI is not set
 # CONFIG_PPP is not set
 # CONFIG_SLIP is not set
+# CONFIG_NET_FC is not set
 # CONFIG_NETCONSOLE is not set
 # CONFIG_NETPOLL is not set
 # CONFIG_NET_POLL_CONTROLLER is not set
@@ -515,12 +703,14 @@ CONFIG_INPUT=y
 # CONFIG_VT is not set
 CONFIG_DEVKMEM=y
 # CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_NOZOMI is not set
 
 #
 # Serial drivers
 #
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_PCI=y
 CONFIG_SERIAL_8250_NR_UARTS=4
 CONFIG_SERIAL_8250_RUNTIME_UARTS=4
 # CONFIG_SERIAL_8250_EXTENDED is not set
@@ -531,40 +721,90 @@ CONFIG_SERIAL_8250_RUNTIME_UARTS=4
 # CONFIG_SERIAL_UARTLITE is not set
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_PMACZILOG is not set
+# CONFIG_SERIAL_JSM is not set
 # CONFIG_SERIAL_OF_PLATFORM is not set
 CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_BRIQ_PANEL is not set
+# CONFIG_HVC_RTAS is not set
 # CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
 # CONFIG_NVRAM is not set
 CONFIG_GEN_RTC=y
 # CONFIG_GEN_RTC_X is not set
 # CONFIG_R3964 is not set
+# CONFIG_APPLICOM is not set
 # CONFIG_RAW_DRIVER is not set
 # CONFIG_TCG_TPM is not set
+CONFIG_DEVPORT=y
 CONFIG_I2C=y
 CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
 
 #
 # I2C Hardware Bus support
 #
+
+#
+# PC SMBus host controller drivers
+#
+# CONFIG_I2C_ALI1535 is not set
+# CONFIG_I2C_ALI1563 is not set
+# CONFIG_I2C_ALI15X3 is not set
+# CONFIG_I2C_AMD756 is not set
+# CONFIG_I2C_AMD8111 is not set
+# CONFIG_I2C_I801 is not set
+# CONFIG_I2C_ISCH is not set
+# CONFIG_I2C_PIIX4 is not set
+# CONFIG_I2C_NFORCE2 is not set
+# CONFIG_I2C_SIS5595 is not set
+# CONFIG_I2C_SIS630 is not set
+# CONFIG_I2C_SIS96X is not set
+# CONFIG_I2C_VIA is not set
+# CONFIG_I2C_VIAPRO is not set
+
+#
+# Mac SMBus host controller drivers
+#
+# CONFIG_I2C_HYDRA is not set
+CONFIG_I2C_POWERMAC=y
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
 CONFIG_I2C_MPC=y
 # CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
 # CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
 # CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_STUB is not set
+
+#
+# Graphics adapter I2C/DDC channel drivers
+#
+# CONFIG_I2C_VOODOO3 is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
 # CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
 
 #
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
+# CONFIG_AT24 is not set
 # CONFIG_SENSORS_EEPROM is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
@@ -573,10 +813,13 @@ CONFIG_I2C_MPC=y
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
 # CONFIG_SPI is not set
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+# CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 CONFIG_HWMON=y
 # CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_AD7414 is not set
 # CONFIG_SENSORS_AD7418 is not set
 # CONFIG_SENSORS_ADM1021 is not set
 # CONFIG_SENSORS_ADM1025 is not set
@@ -586,8 +829,10 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_ADM9240 is not set
 # CONFIG_SENSORS_ADT7470 is not set
 # CONFIG_SENSORS_ADT7473 is not set
+# CONFIG_SENSORS_AMS is not set
 # CONFIG_SENSORS_ATXP1 is not set
 # CONFIG_SENSORS_DS1621 is not set
+# CONFIG_SENSORS_I5K_AMB is not set
 # CONFIG_SENSORS_F71805F is not set
 # CONFIG_SENSORS_F71882FG is not set
 # CONFIG_SENSORS_F75375S is not set
@@ -609,13 +854,16 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_MAX6650 is not set
 # CONFIG_SENSORS_PC87360 is not set
 # CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_SIS5595 is not set
 # CONFIG_SENSORS_DME1737 is not set
 # CONFIG_SENSORS_SMSC47M1 is not set
 # CONFIG_SENSORS_SMSC47M192 is not set
 # CONFIG_SENSORS_SMSC47B397 is not set
 # CONFIG_SENSORS_ADS7828 is not set
 # CONFIG_SENSORS_THMC50 is not set
+# CONFIG_SENSORS_VIA686A is not set
 # CONFIG_SENSORS_VT1211 is not set
+# CONFIG_SENSORS_VT8231 is not set
 # CONFIG_SENSORS_W83781D is not set
 # CONFIG_SENSORS_W83791D is not set
 # CONFIG_SENSORS_W83792D is not set
@@ -626,6 +874,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_W83627EHF is not set
 # CONFIG_HWMON_DEBUG_CHIP is not set
 # CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
 CONFIG_WATCHDOG=y
 # CONFIG_WATCHDOG_NOWAYOUT is not set
 
@@ -633,7 +882,15 @@ CONFIG_WATCHDOG=y
 # Watchdog Device Drivers
 #
 # CONFIG_SOFT_WATCHDOG is not set
-CONFIG_83xx_WDT=y
+# CONFIG_ALIM7101_WDT is not set
+# CONFIG_8xxx_WDT is not set
+# CONFIG_WATCHDOG_RTAS is not set
+
+#
+# PCI-based Watchdog Cards
+#
+# CONFIG_PCIPCWATCHDOG is not set
+# CONFIG_WDTPCI is not set
 
 #
 # Sonics Silicon Backplane
@@ -644,8 +901,10 @@ CONFIG_SSB_POSSIBLE=y
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
 
 #
 # Multimedia devices
@@ -666,6 +925,8 @@ CONFIG_DAB=y
 #
 # Graphics support
 #
+# CONFIG_AGP is not set
+# CONFIG_DRM is not set
 # CONFIG_VGASTATE is not set
 CONFIG_VIDEO_OUTPUT_CONTROL=m
 # CONFIG_FB is not set
@@ -675,10 +936,6 @@ CONFIG_VIDEO_OUTPUT_CONTROL=m
 # Display device support
 #
 # CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Sound
-#
 # CONFIG_SOUND is not set
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
@@ -686,13 +943,17 @@ CONFIG_HID=y
 # CONFIG_HIDRAW is not set
 CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
-# CONFIG_USB_ARCH_HAS_OHCI is not set
+CONFIG_USB_ARCH_HAS_OHCI=y
 CONFIG_USB_ARCH_HAS_EHCI=y
 # CONFIG_USB is not set
 # CONFIG_USB_OTG_WHITELIST is not set
 # CONFIG_USB_OTG_BLACKLIST_HUB is not set
 
 #
+# Enable Host or Gadget support to see Inventra options
+#
+
+#
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
 #
 # CONFIG_USB_GADGET is not set
@@ -700,6 +961,7 @@ CONFIG_USB_ARCH_HAS_EHCI=y
 # CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
 # CONFIG_ACCESSIBILITY is not set
+# CONFIG_INFINIBAND is not set
 # CONFIG_EDAC is not set
 # CONFIG_RTC_CLASS is not set
 # CONFIG_DMADEVICES is not set
@@ -769,6 +1031,7 @@ CONFIG_TMPFS=y
 # CONFIG_CRAMFS is not set
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
 # CONFIG_ROMFS_FS is not set
@@ -779,14 +1042,13 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
-# CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_BIND34 is not set
 CONFIG_RPCSEC_GSS_KRB5=y
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -826,6 +1088,7 @@ CONFIG_BITREVERSE=y
 # CONFIG_GENERIC_FIND_FIRST_BIT is not set
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
+CONFIG_CRC_T10DIF=y
 # CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
@@ -849,8 +1112,18 @@ CONFIG_FRAME_WARN=1024
 # CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+# CONFIG_FTRACE is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
 # CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_IRQSTACKS is not set
+# CONFIG_BOOTX_TEXT is not set
 # CONFIG_PPC_EARLY_DEBUG is not set
 
 #
@@ -904,6 +1177,10 @@ CONFIG_CRYPTO_PCBC=m
 # CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=y
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
 # CONFIG_CRYPTO_SHA1 is not set
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
@@ -935,5 +1212,7 @@ CONFIG_CRYPTO_DES=y
 # CONFIG_CRYPTO_DEFLATE is not set
 # CONFIG_CRYPTO_LZO is not set
 CONFIG_CRYPTO_HW=y
+# CONFIG_CRYPTO_DEV_HIFN_795X is not set
+# CONFIG_CRYPTO_DEV_TALITOS is not set
 # CONFIG_PPC_CLOCK is not set
 # CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/83xx/mpc837x_rdb_defconfig b/arch/powerpc/configs/83xx/mpc837x_rdb_defconfig
index 0d448556f53a..e8d2d691d26c 100644
--- a/arch/powerpc/configs/83xx/mpc837x_rdb_defconfig
+++ b/arch/powerpc/configs/83xx/mpc837x_rdb_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc5
-# Tue Jun 10 09:17:12 2008
+# Linux kernel version: 2.6.27-rc4
+# Thu Aug 21 00:52:25 2008
 #
 # CONFIG_PPC64 is not set
 
@@ -16,6 +16,7 @@ CONFIG_6xx=y
 # CONFIG_E200 is not set
 CONFIG_PPC_FPU=y
 # CONFIG_FSL_EMB_PERFMON is not set
+# CONFIG_ALTIVEC is not set
 CONFIG_PPC_STD_MMU=y
 CONFIG_PPC_STD_MMU_32=y
 # CONFIG_PPC_MM_SLICES is not set
@@ -32,6 +33,7 @@ CONFIG_GENERIC_HARDIRQS=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
@@ -51,6 +53,9 @@ CONFIG_PPC_UDBG_16550=y
 CONFIG_AUDIT_ARCH=y
 CONFIG_GENERIC_BUG=y
 CONFIG_DEFAULT_UIMAGE=y
+CONFIG_HIBERNATE_32=y
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
@@ -88,13 +93,13 @@ CONFIG_INITRAMFS_SOURCE=""
 CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
+CONFIG_PCSPKR_PLATFORM=y
 CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
@@ -112,10 +117,16 @@ CONFIG_SLAB=y
 # CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
+CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
 # CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+# CONFIG_HAVE_CLK is not set
 CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
@@ -126,12 +137,13 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-# CONFIG_KMOD is not set
+CONFIG_KMOD=y
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -150,37 +162,49 @@ CONFIG_CLASSIC_RCU=y
 #
 # Platform support
 #
-# CONFIG_PPC_MULTIPLATFORM is not set
-# CONFIG_PPC_82xx is not set
-CONFIG_PPC_83xx=y
-# CONFIG_PPC_86xx is not set
-# CONFIG_PPC_MPC512x is not set
-# CONFIG_PPC_MPC5121 is not set
+CONFIG_PPC_MULTIPLATFORM=y
+CONFIG_CLASSIC32=y
+CONFIG_PPC_CHRP=y
+# CONFIG_MPC5121_ADS is not set
+# CONFIG_MPC5121_GENERIC is not set
+# CONFIG_PPC_MPC52xx is not set
+CONFIG_PPC_PMAC=y
 # CONFIG_PPC_CELL is not set
 # CONFIG_PPC_CELL_NATIVE is not set
+# CONFIG_PPC_82xx is not set
 # CONFIG_PQ2ADS is not set
-CONFIG_MPC83xx=y
+CONFIG_PPC_83xx=y
 # CONFIG_MPC831x_RDB is not set
 # CONFIG_MPC832x_MDS is not set
 # CONFIG_MPC832x_RDB is not set
 # CONFIG_MPC834x_MDS is not set
 # CONFIG_MPC834x_ITX is not set
 # CONFIG_MPC836x_MDS is not set
+# CONFIG_MPC836x_RDK is not set
 # CONFIG_MPC837x_MDS is not set
 CONFIG_MPC837x_RDB=y
 # CONFIG_SBC834x is not set
+# CONFIG_ASP834x is not set
 CONFIG_PPC_MPC837x=y
+# CONFIG_PPC_86xx is not set
+# CONFIG_EMBEDDED6xx is not set
+CONFIG_PPC_NATIVE=y
+# CONFIG_UDBG_RTAS_CONSOLE is not set
 CONFIG_IPIC=y
-# CONFIG_MPIC is not set
+CONFIG_MPIC=y
 # CONFIG_MPIC_WEIRD is not set
-# CONFIG_PPC_I8259 is not set
-# CONFIG_PPC_RTAS is not set
+CONFIG_PPC_I8259=y
+CONFIG_PPC_RTAS=y
+# CONFIG_RTAS_ERROR_LOGGING is not set
+CONFIG_RTAS_PROC=y
 # CONFIG_MMIO_NVRAM is not set
-# CONFIG_PPC_MPC106 is not set
+CONFIG_PPC_MPC106=y
 # CONFIG_PPC_970_NAP is not set
 # CONFIG_PPC_INDIRECT_IO is not set
 # CONFIG_GENERIC_IOMAP is not set
 # CONFIG_CPU_FREQ is not set
+# CONFIG_PPC601_SYNC_FIX is not set
+# CONFIG_TAU is not set
 # CONFIG_FSL_ULI1575 is not set
 
 #
@@ -206,6 +230,7 @@ CONFIG_BINFMT_ELF=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_HAS_WALK_MEMORY=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+# CONFIG_KEXEC is not set
 CONFIG_ARCH_FLATMEM_ENABLE=y
 CONFIG_ARCH_POPULATES_NODE_MAP=y
 CONFIG_SELECT_MEMORY_MODEL=y
@@ -218,6 +243,7 @@ CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_MIGRATION=y
 # CONFIG_RESOURCES_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
@@ -225,6 +251,7 @@ CONFIG_VIRT_TO_BUS=y
 CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
+CONFIG_EXTRA_TARGETS=""
 # CONFIG_PM is not set
 CONFIG_SECCOMP=y
 CONFIG_ISA_DMA_API=y
@@ -232,15 +259,22 @@ CONFIG_ISA_DMA_API=y
 #
 # Bus options
 #
+# CONFIG_ISA is not set
 CONFIG_ZONE_DMA=y
 CONFIG_GENERIC_ISA_DMA=y
 CONFIG_PPC_INDIRECT_PCI=y
 CONFIG_FSL_SOC=y
-# CONFIG_PCI is not set
-# CONFIG_PCI_DOMAINS is not set
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
+CONFIG_FSL_PCI=y
+CONFIG_PPC_PCI_CHOICE=y
+CONFIG_PCI=y
+CONFIG_PCI_DOMAINS=y
+CONFIG_PCI_SYSCALL=y
+# CONFIG_PCIEPORTBUS is not set
+CONFIG_ARCH_SUPPORTS_MSI=y
+# CONFIG_PCI_MSI is not set
+CONFIG_PCI_LEGACY=y
 # CONFIG_PCCARD is not set
+# CONFIG_HOTPLUG_PCI is not set
 # CONFIG_HAS_RAPIDIO is not set
 
 #
@@ -256,10 +290,6 @@ CONFIG_PAGE_OFFSET=0xc0000000
 CONFIG_KERNEL_START=0xc0000000
 CONFIG_PHYSICAL_START=0x00000000
 CONFIG_TASK_SIZE=0xc0000000
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -355,10 +385,16 @@ CONFIG_OF_I2C=y
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_FD is not set
+# CONFIG_MAC_FLOPPY is not set
+# CONFIG_BLK_CPQ_DA is not set
+# CONFIG_BLK_CPQ_CISS_DA is not set
+# CONFIG_BLK_DEV_DAC960 is not set
+# CONFIG_BLK_DEV_UMEM is not set
 # CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
 # CONFIG_BLK_DEV_CRYPTOLOOP is not set
 # CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_SX8 is not set
 # CONFIG_BLK_DEV_UB is not set
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=16
@@ -366,9 +402,14 @@ CONFIG_BLK_DEV_RAM_SIZE=32768
 # CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
+# CONFIG_PHANTOM is not set
 # CONFIG_EEPROM_93CX6 is not set
+# CONFIG_SGI_IOC4 is not set
+# CONFIG_TIFM_CORE is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_HP_ILO is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -411,14 +452,106 @@ CONFIG_SCSI_WAIT_SCAN=m
 # CONFIG_SCSI_SRP_ATTRS is not set
 CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_ISCSI_TCP is not set
+# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
+# CONFIG_SCSI_3W_9XXX is not set
+# CONFIG_SCSI_ACARD is not set
+# CONFIG_SCSI_AACRAID is not set
+# CONFIG_SCSI_AIC7XXX is not set
+# CONFIG_SCSI_AIC7XXX_OLD is not set
+# CONFIG_SCSI_AIC79XX is not set
+# CONFIG_SCSI_AIC94XX is not set
+# CONFIG_SCSI_DPT_I2O is not set
+# CONFIG_SCSI_ADVANSYS is not set
+# CONFIG_SCSI_ARCMSR is not set
+# CONFIG_MEGARAID_NEWGEN is not set
+# CONFIG_MEGARAID_LEGACY is not set
+# CONFIG_MEGARAID_SAS is not set
+# CONFIG_SCSI_HPTIOP is not set
+# CONFIG_SCSI_BUSLOGIC is not set
+# CONFIG_SCSI_DMX3191D is not set
+# CONFIG_SCSI_EATA is not set
+# CONFIG_SCSI_FUTURE_DOMAIN is not set
+# CONFIG_SCSI_GDTH is not set
+# CONFIG_SCSI_IPS is not set
+# CONFIG_SCSI_INITIO is not set
+# CONFIG_SCSI_INIA100 is not set
+# CONFIG_SCSI_MVSAS is not set
+# CONFIG_SCSI_STEX is not set
+# CONFIG_SCSI_SYM53C8XX_2 is not set
+# CONFIG_SCSI_IPR is not set
+# CONFIG_SCSI_QLOGIC_1280 is not set
+# CONFIG_SCSI_QLA_FC is not set
+# CONFIG_SCSI_QLA_ISCSI is not set
+# CONFIG_SCSI_LPFC is not set
+# CONFIG_SCSI_DC395x is not set
+# CONFIG_SCSI_DC390T is not set
+# CONFIG_SCSI_NSP32 is not set
 # CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_MESH is not set
+# CONFIG_SCSI_MAC53C94 is not set
+# CONFIG_SCSI_SRP is not set
+# CONFIG_SCSI_DH is not set
 CONFIG_ATA=y
 # CONFIG_ATA_NONSTANDARD is not set
 CONFIG_SATA_PMP=y
+# CONFIG_SATA_AHCI is not set
+# CONFIG_SATA_SIL24 is not set
 CONFIG_SATA_FSL=y
 CONFIG_ATA_SFF=y
+# CONFIG_SATA_SVW is not set
+# CONFIG_ATA_PIIX is not set
 # CONFIG_SATA_MV is not set
+# CONFIG_SATA_NV is not set
+# CONFIG_PDC_ADMA is not set
+# CONFIG_SATA_QSTOR is not set
+# CONFIG_SATA_PROMISE is not set
+# CONFIG_SATA_SX4 is not set
+# CONFIG_SATA_SIL is not set
+# CONFIG_SATA_SIS is not set
+# CONFIG_SATA_ULI is not set
+# CONFIG_SATA_VIA is not set
+# CONFIG_SATA_VITESSE is not set
+# CONFIG_SATA_INIC162X is not set
+# CONFIG_PATA_ALI is not set
+# CONFIG_PATA_AMD is not set
+# CONFIG_PATA_ARTOP is not set
+# CONFIG_PATA_ATIIXP is not set
+# CONFIG_PATA_CMD640_PCI is not set
+# CONFIG_PATA_CMD64X is not set
+# CONFIG_PATA_CS5520 is not set
+# CONFIG_PATA_CS5530 is not set
+# CONFIG_PATA_CYPRESS is not set
+# CONFIG_PATA_EFAR is not set
+# CONFIG_ATA_GENERIC is not set
+# CONFIG_PATA_HPT366 is not set
+# CONFIG_PATA_HPT37X is not set
+# CONFIG_PATA_HPT3X2N is not set
+# CONFIG_PATA_HPT3X3 is not set
+# CONFIG_PATA_IT821X is not set
+# CONFIG_PATA_IT8213 is not set
+# CONFIG_PATA_JMICRON is not set
+# CONFIG_PATA_TRIFLEX is not set
+# CONFIG_PATA_MARVELL is not set
+# CONFIG_PATA_MPIIX is not set
+# CONFIG_PATA_OLDPIIX is not set
+# CONFIG_PATA_NETCELL is not set
+# CONFIG_PATA_NINJA32 is not set
+# CONFIG_PATA_NS87410 is not set
+# CONFIG_PATA_NS87415 is not set
+# CONFIG_PATA_OPTI is not set
+# CONFIG_PATA_OPTIDMA is not set
+# CONFIG_PATA_PDC_OLD is not set
+# CONFIG_PATA_RADISYS is not set
+# CONFIG_PATA_RZ1000 is not set
+# CONFIG_PATA_SC1200 is not set
+# CONFIG_PATA_SERVERWORKS is not set
+# CONFIG_PATA_PDC2027X is not set
+# CONFIG_PATA_SIL680 is not set
+# CONFIG_PATA_SIS is not set
+# CONFIG_PATA_VIA is not set
+# CONFIG_PATA_WINBOND is not set
 # CONFIG_PATA_PLATFORM is not set
+# CONFIG_PATA_SCH is not set
 CONFIG_MD=y
 CONFIG_BLK_DEV_MD=y
 # CONFIG_MD_LINEAR is not set
@@ -430,15 +563,27 @@ CONFIG_MD_RAID5_RESHAPE=y
 # CONFIG_MD_MULTIPATH is not set
 # CONFIG_MD_FAULTY is not set
 # CONFIG_BLK_DEV_DM is not set
+# CONFIG_FUSION is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+
+#
+# Enable only one of the two stacks, unless you know what you are doing
+#
+# CONFIG_FIREWIRE is not set
+# CONFIG_IEEE1394 is not set
+# CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
 # CONFIG_EQUALIZER is not set
 # CONFIG_TUN is not set
 # CONFIG_VETH is not set
+# CONFIG_ARCNET is not set
 CONFIG_PHYLIB=y
 
 #
@@ -458,16 +603,44 @@ CONFIG_FIXED_PHY=y
 # CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
+# CONFIG_MACE is not set
+# CONFIG_BMAC is not set
+# CONFIG_HAPPYMEAL is not set
+# CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
+# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_NET_TULIP is not set
+# CONFIG_HP100 is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
 # CONFIG_IBM_NEW_EMAC_RGMII is not set
 # CONFIG_IBM_NEW_EMAC_TAH is not set
 # CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_NET_PCI is not set
 # CONFIG_B44 is not set
 CONFIG_NETDEV_1000=y
-# CONFIG_E1000E_ENABLED is not set
+# CONFIG_ACENIC is not set
+# CONFIG_DL2K is not set
+# CONFIG_E1000 is not set
+# CONFIG_E1000E is not set
+# CONFIG_IP1000 is not set
+# CONFIG_IGB is not set
+# CONFIG_NS83820 is not set
+# CONFIG_HAMACHI is not set
+# CONFIG_YELLOWFIN is not set
+# CONFIG_R8169 is not set
+# CONFIG_SIS190 is not set
+# CONFIG_SKGE is not set
+# CONFIG_SKY2 is not set
+# CONFIG_VIA_VELOCITY is not set
+# CONFIG_TIGON3 is not set
+# CONFIG_BNX2 is not set
 CONFIG_GIANFAR=y
-CONFIG_GFAR_NAPI=y
+# CONFIG_MV643XX_ETH is not set
+# CONFIG_QLA3XXX is not set
+# CONFIG_ATL1 is not set
+# CONFIG_ATL1E is not set
 # CONFIG_NETDEV_10000 is not set
+# CONFIG_TR is not set
 
 #
 # Wireless LAN
@@ -485,8 +658,11 @@ CONFIG_GFAR_NAPI=y
 # CONFIG_USB_RTL8150 is not set
 # CONFIG_USB_USBNET is not set
 # CONFIG_WAN is not set
+# CONFIG_FDDI is not set
+# CONFIG_HIPPI is not set
 # CONFIG_PPP is not set
 # CONFIG_SLIP is not set
+# CONFIG_NET_FC is not set
 # CONFIG_NETCONSOLE is not set
 # CONFIG_NETPOLL is not set
 # CONFIG_NET_POLL_CONTROLLER is not set
@@ -530,12 +706,14 @@ CONFIG_INPUT=y
 # CONFIG_VT is not set
 CONFIG_DEVKMEM=y
 # CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_NOZOMI is not set
 
 #
 # Serial drivers
 #
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_PCI=y
 CONFIG_SERIAL_8250_NR_UARTS=4
 CONFIG_SERIAL_8250_RUNTIME_UARTS=4
 # CONFIG_SERIAL_8250_EXTENDED is not set
@@ -546,41 +724,91 @@ CONFIG_SERIAL_8250_RUNTIME_UARTS=4
 # CONFIG_SERIAL_UARTLITE is not set
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_PMACZILOG is not set
+# CONFIG_SERIAL_JSM is not set
 # CONFIG_SERIAL_OF_PLATFORM is not set
 CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_BRIQ_PANEL is not set
+# CONFIG_HVC_RTAS is not set
 # CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
 # CONFIG_NVRAM is not set
 CONFIG_GEN_RTC=y
 # CONFIG_GEN_RTC_X is not set
 # CONFIG_R3964 is not set
+# CONFIG_APPLICOM is not set
 # CONFIG_RAW_DRIVER is not set
 # CONFIG_TCG_TPM is not set
+CONFIG_DEVPORT=y
 CONFIG_I2C=y
 CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
 
 #
 # I2C Hardware Bus support
 #
+
+#
+# PC SMBus host controller drivers
+#
+# CONFIG_I2C_ALI1535 is not set
+# CONFIG_I2C_ALI1563 is not set
+# CONFIG_I2C_ALI15X3 is not set
+# CONFIG_I2C_AMD756 is not set
+# CONFIG_I2C_AMD8111 is not set
+# CONFIG_I2C_I801 is not set
+# CONFIG_I2C_ISCH is not set
+# CONFIG_I2C_PIIX4 is not set
+# CONFIG_I2C_NFORCE2 is not set
+# CONFIG_I2C_SIS5595 is not set
+# CONFIG_I2C_SIS630 is not set
+# CONFIG_I2C_SIS96X is not set
+# CONFIG_I2C_VIA is not set
+# CONFIG_I2C_VIAPRO is not set
+
+#
+# Mac SMBus host controller drivers
+#
+# CONFIG_I2C_HYDRA is not set
+CONFIG_I2C_POWERMAC=y
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
 CONFIG_I2C_MPC=y
 # CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
 # CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
 # CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_STUB is not set
 # CONFIG_I2C_TINY_USB is not set
+
+#
+# Graphics adapter I2C/DDC channel drivers
+#
+# CONFIG_I2C_VOODOO3 is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
 # CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
 
 #
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
+# CONFIG_AT24 is not set
 # CONFIG_SENSORS_EEPROM is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
@@ -589,10 +817,13 @@ CONFIG_I2C_MPC=y
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
 # CONFIG_SPI is not set
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+# CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 CONFIG_HWMON=y
 # CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_AD7414 is not set
 # CONFIG_SENSORS_AD7418 is not set
 # CONFIG_SENSORS_ADM1021 is not set
 # CONFIG_SENSORS_ADM1025 is not set
@@ -602,8 +833,10 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_ADM9240 is not set
 # CONFIG_SENSORS_ADT7470 is not set
 # CONFIG_SENSORS_ADT7473 is not set
+# CONFIG_SENSORS_AMS is not set
 # CONFIG_SENSORS_ATXP1 is not set
 # CONFIG_SENSORS_DS1621 is not set
+# CONFIG_SENSORS_I5K_AMB is not set
 # CONFIG_SENSORS_F71805F is not set
 # CONFIG_SENSORS_F71882FG is not set
 # CONFIG_SENSORS_F75375S is not set
@@ -625,13 +858,16 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_MAX6650 is not set
 # CONFIG_SENSORS_PC87360 is not set
 # CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_SIS5595 is not set
 # CONFIG_SENSORS_DME1737 is not set
 # CONFIG_SENSORS_SMSC47M1 is not set
 # CONFIG_SENSORS_SMSC47M192 is not set
 # CONFIG_SENSORS_SMSC47B397 is not set
 # CONFIG_SENSORS_ADS7828 is not set
 # CONFIG_SENSORS_THMC50 is not set
+# CONFIG_SENSORS_VIA686A is not set
 # CONFIG_SENSORS_VT1211 is not set
+# CONFIG_SENSORS_VT8231 is not set
 # CONFIG_SENSORS_W83781D is not set
 # CONFIG_SENSORS_W83791D is not set
 # CONFIG_SENSORS_W83792D is not set
@@ -642,6 +878,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_W83627EHF is not set
 # CONFIG_HWMON_DEBUG_CHIP is not set
 # CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
 CONFIG_WATCHDOG=y
 # CONFIG_WATCHDOG_NOWAYOUT is not set
 
@@ -649,7 +886,15 @@ CONFIG_WATCHDOG=y
 # Watchdog Device Drivers
 #
 # CONFIG_SOFT_WATCHDOG is not set
-CONFIG_83xx_WDT=y
+# CONFIG_ALIM7101_WDT is not set
+# CONFIG_8xxx_WDT is not set
+# CONFIG_WATCHDOG_RTAS is not set
+
+#
+# PCI-based Watchdog Cards
+#
+# CONFIG_PCIPCWATCHDOG is not set
+# CONFIG_WDTPCI is not set
 
 #
 # USB-based Watchdog Cards
@@ -665,8 +910,10 @@ CONFIG_SSB_POSSIBLE=y
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
 
 #
 # Multimedia devices
@@ -688,6 +935,8 @@ CONFIG_DAB=y
 #
 # Graphics support
 #
+# CONFIG_AGP is not set
+# CONFIG_DRM is not set
 # CONFIG_VGASTATE is not set
 CONFIG_VIDEO_OUTPUT_CONTROL=m
 # CONFIG_FB is not set
@@ -697,10 +946,6 @@ CONFIG_VIDEO_OUTPUT_CONTROL=m
 # Display device support
 #
 # CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Sound
-#
 # CONFIG_SOUND is not set
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
@@ -716,7 +961,7 @@ CONFIG_USB_HID=y
 # CONFIG_USB_HIDDEV is not set
 CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
-# CONFIG_USB_ARCH_HAS_OHCI is not set
+CONFIG_USB_ARCH_HAS_OHCI=y
 CONFIG_USB_ARCH_HAS_EHCI=y
 CONFIG_USB=y
 # CONFIG_USB_DEBUG is not set
@@ -731,6 +976,7 @@ CONFIG_USB_DEVICE_CLASS=y
 # CONFIG_USB_OTG is not set
 # CONFIG_USB_OTG_WHITELIST is not set
 # CONFIG_USB_OTG_BLACKLIST_HUB is not set
+CONFIG_USB_MON=y
 
 #
 # USB Host Controller Drivers
@@ -743,6 +989,8 @@ CONFIG_USB_EHCI_FSL=y
 CONFIG_USB_EHCI_HCD_PPC_OF=y
 # CONFIG_USB_ISP116X_HCD is not set
 # CONFIG_USB_ISP1760_HCD is not set
+# CONFIG_USB_OHCI_HCD is not set
+# CONFIG_USB_UHCI_HCD is not set
 # CONFIG_USB_SL811_HCD is not set
 # CONFIG_USB_R8A66597_HCD is not set
 
@@ -768,7 +1016,6 @@ CONFIG_USB_EHCI_HCD_PPC_OF=y
 #
 # CONFIG_USB_MDC800 is not set
 # CONFIG_USB_MICROTEK is not set
-CONFIG_USB_MON=y
 
 #
 # USB port drivers
@@ -781,7 +1028,6 @@ CONFIG_USB_MON=y
 # CONFIG_USB_EMI62 is not set
 # CONFIG_USB_EMI26 is not set
 # CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_AUERSWALD is not set
 # CONFIG_USB_RIO500 is not set
 # CONFIG_USB_LEGOTOWER is not set
 # CONFIG_USB_LCD is not set
@@ -803,6 +1049,7 @@ CONFIG_USB_MON=y
 # CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
 # CONFIG_ACCESSIBILITY is not set
+# CONFIG_INFINIBAND is not set
 # CONFIG_EDAC is not set
 # CONFIG_RTC_CLASS is not set
 # CONFIG_DMADEVICES is not set
@@ -872,6 +1119,7 @@ CONFIG_TMPFS=y
 # CONFIG_CRAMFS is not set
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
 # CONFIG_ROMFS_FS is not set
@@ -882,14 +1130,13 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
-# CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_BIND34 is not set
 CONFIG_RPCSEC_GSS_KRB5=y
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -929,6 +1176,7 @@ CONFIG_BITREVERSE=y
 # CONFIG_GENERIC_FIND_FIRST_BIT is not set
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
+CONFIG_CRC_T10DIF=y
 # CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
@@ -952,8 +1200,18 @@ CONFIG_FRAME_WARN=1024
 # CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+# CONFIG_FTRACE is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
 # CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_IRQSTACKS is not set
+# CONFIG_BOOTX_TEXT is not set
 # CONFIG_PPC_EARLY_DEBUG is not set
 
 #
@@ -1011,6 +1269,10 @@ CONFIG_CRYPTO_PCBC=m
 # CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=y
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
 # CONFIG_CRYPTO_SHA1 is not set
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
@@ -1042,5 +1304,7 @@ CONFIG_CRYPTO_DES=y
 # CONFIG_CRYPTO_DEFLATE is not set
 # CONFIG_CRYPTO_LZO is not set
 CONFIG_CRYPTO_HW=y
+# CONFIG_CRYPTO_DEV_HIFN_795X is not set
+# CONFIG_CRYPTO_DEV_TALITOS is not set
 # CONFIG_PPC_CLOCK is not set
 # CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/83xx/sbc834x_defconfig b/arch/powerpc/configs/83xx/sbc834x_defconfig
index 1752918be2c1..9245a67da200 100644
--- a/arch/powerpc/configs/83xx/sbc834x_defconfig
+++ b/arch/powerpc/configs/83xx/sbc834x_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc5
-# Mon Jun  9 08:52:30 2008
+# Linux kernel version: 2.6.27-rc4
+# Thu Aug 21 00:52:27 2008
 #
 # CONFIG_PPC64 is not set
 
@@ -16,6 +16,7 @@ CONFIG_6xx=y
 # CONFIG_E200 is not set
 CONFIG_PPC_FPU=y
 # CONFIG_FSL_EMB_PERFMON is not set
+# CONFIG_ALTIVEC is not set
 CONFIG_PPC_STD_MMU=y
 CONFIG_PPC_STD_MMU_32=y
 # CONFIG_PPC_MM_SLICES is not set
@@ -32,6 +33,7 @@ CONFIG_GENERIC_HARDIRQS=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
@@ -51,6 +53,9 @@ CONFIG_PPC_UDBG_16550=y
 CONFIG_AUDIT_ARCH=y
 CONFIG_GENERIC_BUG=y
 CONFIG_DEFAULT_UIMAGE=y
+CONFIG_HIBERNATE_32=y
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
@@ -88,12 +93,12 @@ CONFIG_INITRAMFS_SOURCE=""
 CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
 # CONFIG_KALLSYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
+CONFIG_PCSPKR_PLATFORM=y
 CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
@@ -110,10 +115,16 @@ CONFIG_SLAB=y
 # CONFIG_PROFILING is not set
 # CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
+CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
 # CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+# CONFIG_HAVE_CLK is not set
 CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
@@ -124,12 +135,13 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-# CONFIG_KMOD is not set
+CONFIG_KMOD=y
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -148,37 +160,49 @@ CONFIG_CLASSIC_RCU=y
 #
 # Platform support
 #
-# CONFIG_PPC_MULTIPLATFORM is not set
-# CONFIG_PPC_82xx is not set
-CONFIG_PPC_83xx=y
-# CONFIG_PPC_86xx is not set
-# CONFIG_PPC_MPC512x is not set
-# CONFIG_PPC_MPC5121 is not set
+CONFIG_PPC_MULTIPLATFORM=y
+CONFIG_CLASSIC32=y
+CONFIG_PPC_CHRP=y
+# CONFIG_MPC5121_ADS is not set
+# CONFIG_MPC5121_GENERIC is not set
+# CONFIG_PPC_MPC52xx is not set
+CONFIG_PPC_PMAC=y
 # CONFIG_PPC_CELL is not set
 # CONFIG_PPC_CELL_NATIVE is not set
+# CONFIG_PPC_82xx is not set
 # CONFIG_PQ2ADS is not set
-CONFIG_MPC83xx=y
+CONFIG_PPC_83xx=y
 # CONFIG_MPC831x_RDB is not set
 # CONFIG_MPC832x_MDS is not set
 # CONFIG_MPC832x_RDB is not set
 # CONFIG_MPC834x_MDS is not set
 # CONFIG_MPC834x_ITX is not set
 # CONFIG_MPC836x_MDS is not set
+# CONFIG_MPC836x_RDK is not set
 # CONFIG_MPC837x_MDS is not set
 # CONFIG_MPC837x_RDB is not set
 CONFIG_SBC834x=y
+# CONFIG_ASP834x is not set
 CONFIG_PPC_MPC834x=y
+# CONFIG_PPC_86xx is not set
+# CONFIG_EMBEDDED6xx is not set
+CONFIG_PPC_NATIVE=y
+# CONFIG_UDBG_RTAS_CONSOLE is not set
 CONFIG_IPIC=y
-# CONFIG_MPIC is not set
+CONFIG_MPIC=y
 # CONFIG_MPIC_WEIRD is not set
-# CONFIG_PPC_I8259 is not set
-# CONFIG_PPC_RTAS is not set
+CONFIG_PPC_I8259=y
+CONFIG_PPC_RTAS=y
+# CONFIG_RTAS_ERROR_LOGGING is not set
+CONFIG_RTAS_PROC=y
 # CONFIG_MMIO_NVRAM is not set
-# CONFIG_PPC_MPC106 is not set
+CONFIG_PPC_MPC106=y
 # CONFIG_PPC_970_NAP is not set
 # CONFIG_PPC_INDIRECT_IO is not set
 # CONFIG_GENERIC_IOMAP is not set
 # CONFIG_CPU_FREQ is not set
+# CONFIG_PPC601_SYNC_FIX is not set
+# CONFIG_TAU is not set
 # CONFIG_FSL_ULI1575 is not set
 
 #
@@ -204,6 +228,7 @@ CONFIG_BINFMT_ELF=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_HAS_WALK_MEMORY=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+# CONFIG_KEXEC is not set
 CONFIG_ARCH_FLATMEM_ENABLE=y
 CONFIG_ARCH_POPULATES_NODE_MAP=y
 CONFIG_SELECT_MEMORY_MODEL=y
@@ -216,6 +241,7 @@ CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_MIGRATION=y
 # CONFIG_RESOURCES_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
@@ -223,6 +249,7 @@ CONFIG_VIRT_TO_BUS=y
 CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
+CONFIG_EXTRA_TARGETS=""
 # CONFIG_PM is not set
 CONFIG_SECCOMP=y
 CONFIG_ISA_DMA_API=y
@@ -230,15 +257,22 @@ CONFIG_ISA_DMA_API=y
 #
 # Bus options
 #
+# CONFIG_ISA is not set
 CONFIG_ZONE_DMA=y
 CONFIG_GENERIC_ISA_DMA=y
 CONFIG_PPC_INDIRECT_PCI=y
 CONFIG_FSL_SOC=y
-# CONFIG_PCI is not set
-# CONFIG_PCI_DOMAINS is not set
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
+CONFIG_FSL_PCI=y
+CONFIG_PPC_PCI_CHOICE=y
+CONFIG_PCI=y
+CONFIG_PCI_DOMAINS=y
+CONFIG_PCI_SYSCALL=y
+# CONFIG_PCIEPORTBUS is not set
+CONFIG_ARCH_SUPPORTS_MSI=y
+# CONFIG_PCI_MSI is not set
+CONFIG_PCI_LEGACY=y
 # CONFIG_PCCARD is not set
+# CONFIG_HOTPLUG_PCI is not set
 # CONFIG_HAS_RAPIDIO is not set
 
 #
@@ -254,10 +288,6 @@ CONFIG_PAGE_OFFSET=0xc0000000
 CONFIG_KERNEL_START=0xc0000000
 CONFIG_PHYSICAL_START=0x00000000
 CONFIG_TASK_SIZE=0xc0000000
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -358,19 +388,30 @@ CONFIG_OF_I2C=y
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_FD is not set
+# CONFIG_MAC_FLOPPY is not set
+# CONFIG_BLK_CPQ_DA is not set
+# CONFIG_BLK_CPQ_CISS_DA is not set
+# CONFIG_BLK_DEV_DAC960 is not set
+# CONFIG_BLK_DEV_UMEM is not set
 # CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
 # CONFIG_BLK_DEV_CRYPTOLOOP is not set
 # CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_SX8 is not set
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=32768
 # CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
+# CONFIG_PHANTOM is not set
 # CONFIG_EEPROM_93CX6 is not set
+# CONFIG_SGI_IOC4 is not set
+# CONFIG_TIFM_CORE is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_HP_ILO is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -383,15 +424,27 @@ CONFIG_HAVE_IDE=y
 # CONFIG_SCSI_NETLINK is not set
 # CONFIG_ATA is not set
 # CONFIG_MD is not set
+# CONFIG_FUSION is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+
+#
+# Enable only one of the two stacks, unless you know what you are doing
+#
+# CONFIG_FIREWIRE is not set
+# CONFIG_IEEE1394 is not set
+# CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
 # CONFIG_EQUALIZER is not set
 # CONFIG_TUN is not set
 # CONFIG_VETH is not set
+# CONFIG_ARCNET is not set
 CONFIG_PHYLIB=y
 
 #
@@ -411,16 +464,44 @@ CONFIG_BROADCOM_PHY=y
 # CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
+# CONFIG_MACE is not set
+# CONFIG_BMAC is not set
+# CONFIG_HAPPYMEAL is not set
+# CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
+# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_NET_TULIP is not set
+# CONFIG_HP100 is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
 # CONFIG_IBM_NEW_EMAC_RGMII is not set
 # CONFIG_IBM_NEW_EMAC_TAH is not set
 # CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_NET_PCI is not set
 # CONFIG_B44 is not set
 CONFIG_NETDEV_1000=y
-# CONFIG_E1000E_ENABLED is not set
+# CONFIG_ACENIC is not set
+# CONFIG_DL2K is not set
+# CONFIG_E1000 is not set
+# CONFIG_E1000E is not set
+# CONFIG_IP1000 is not set
+# CONFIG_IGB is not set
+# CONFIG_NS83820 is not set
+# CONFIG_HAMACHI is not set
+# CONFIG_YELLOWFIN is not set
+# CONFIG_R8169 is not set
+# CONFIG_SIS190 is not set
+# CONFIG_SKGE is not set
+# CONFIG_SKY2 is not set
+# CONFIG_VIA_VELOCITY is not set
+# CONFIG_TIGON3 is not set
+# CONFIG_BNX2 is not set
 CONFIG_GIANFAR=y
-# CONFIG_GFAR_NAPI is not set
+# CONFIG_MV643XX_ETH is not set
+# CONFIG_QLA3XXX is not set
+# CONFIG_ATL1 is not set
+# CONFIG_ATL1E is not set
 # CONFIG_NETDEV_10000 is not set
+# CONFIG_TR is not set
 
 #
 # Wireless LAN
@@ -429,6 +510,8 @@ CONFIG_GIANFAR=y
 # CONFIG_WLAN_80211 is not set
 # CONFIG_IWLWIFI_LEDS is not set
 # CONFIG_WAN is not set
+# CONFIG_FDDI is not set
+# CONFIG_HIPPI is not set
 # CONFIG_PPP is not set
 # CONFIG_SLIP is not set
 # CONFIG_NETCONSOLE is not set
@@ -474,12 +557,14 @@ CONFIG_INPUT=y
 # CONFIG_VT is not set
 CONFIG_DEVKMEM=y
 # CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_NOZOMI is not set
 
 #
 # Serial drivers
 #
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_PCI=y
 CONFIG_SERIAL_8250_NR_UARTS=4
 CONFIG_SERIAL_8250_RUNTIME_UARTS=4
 # CONFIG_SERIAL_8250_EXTENDED is not set
@@ -490,40 +575,90 @@ CONFIG_SERIAL_8250_RUNTIME_UARTS=4
 # CONFIG_SERIAL_UARTLITE is not set
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_PMACZILOG is not set
+# CONFIG_SERIAL_JSM is not set
 # CONFIG_SERIAL_OF_PLATFORM is not set
 CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_BRIQ_PANEL is not set
+# CONFIG_HVC_RTAS is not set
 # CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
 # CONFIG_NVRAM is not set
 CONFIG_GEN_RTC=y
 # CONFIG_GEN_RTC_X is not set
 # CONFIG_R3964 is not set
+# CONFIG_APPLICOM is not set
 # CONFIG_RAW_DRIVER is not set
 # CONFIG_TCG_TPM is not set
+CONFIG_DEVPORT=y
 CONFIG_I2C=y
 CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
 
 #
 # I2C Hardware Bus support
 #
+
+#
+# PC SMBus host controller drivers
+#
+# CONFIG_I2C_ALI1535 is not set
+# CONFIG_I2C_ALI1563 is not set
+# CONFIG_I2C_ALI15X3 is not set
+# CONFIG_I2C_AMD756 is not set
+# CONFIG_I2C_AMD8111 is not set
+# CONFIG_I2C_I801 is not set
+# CONFIG_I2C_ISCH is not set
+# CONFIG_I2C_PIIX4 is not set
+# CONFIG_I2C_NFORCE2 is not set
+# CONFIG_I2C_SIS5595 is not set
+# CONFIG_I2C_SIS630 is not set
+# CONFIG_I2C_SIS96X is not set
+# CONFIG_I2C_VIA is not set
+# CONFIG_I2C_VIAPRO is not set
+
+#
+# Mac SMBus host controller drivers
+#
+# CONFIG_I2C_HYDRA is not set
+CONFIG_I2C_POWERMAC=y
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
 CONFIG_I2C_MPC=y
 # CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
 # CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
 # CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_STUB is not set
+
+#
+# Graphics adapter I2C/DDC channel drivers
+#
+# CONFIG_I2C_VOODOO3 is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
 # CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
 
 #
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
+# CONFIG_AT24 is not set
 # CONFIG_SENSORS_EEPROM is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
@@ -532,10 +667,13 @@ CONFIG_I2C_MPC=y
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
 # CONFIG_SPI is not set
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+# CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 CONFIG_HWMON=y
 # CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_AD7414 is not set
 # CONFIG_SENSORS_AD7418 is not set
 # CONFIG_SENSORS_ADM1021 is not set
 # CONFIG_SENSORS_ADM1025 is not set
@@ -545,8 +683,10 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_ADM9240 is not set
 # CONFIG_SENSORS_ADT7470 is not set
 # CONFIG_SENSORS_ADT7473 is not set
+# CONFIG_SENSORS_AMS is not set
 # CONFIG_SENSORS_ATXP1 is not set
 # CONFIG_SENSORS_DS1621 is not set
+# CONFIG_SENSORS_I5K_AMB is not set
 # CONFIG_SENSORS_F71805F is not set
 # CONFIG_SENSORS_F71882FG is not set
 # CONFIG_SENSORS_F75375S is not set
@@ -568,13 +708,16 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_MAX6650 is not set
 # CONFIG_SENSORS_PC87360 is not set
 # CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_SIS5595 is not set
 # CONFIG_SENSORS_DME1737 is not set
 # CONFIG_SENSORS_SMSC47M1 is not set
 # CONFIG_SENSORS_SMSC47M192 is not set
 # CONFIG_SENSORS_SMSC47B397 is not set
 # CONFIG_SENSORS_ADS7828 is not set
 # CONFIG_SENSORS_THMC50 is not set
+# CONFIG_SENSORS_VIA686A is not set
 # CONFIG_SENSORS_VT1211 is not set
+# CONFIG_SENSORS_VT8231 is not set
 # CONFIG_SENSORS_W83781D is not set
 # CONFIG_SENSORS_W83791D is not set
 # CONFIG_SENSORS_W83792D is not set
@@ -585,6 +728,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_W83627EHF is not set
 # CONFIG_HWMON_DEBUG_CHIP is not set
 # CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
 CONFIG_WATCHDOG=y
 # CONFIG_WATCHDOG_NOWAYOUT is not set
 
@@ -592,7 +736,15 @@ CONFIG_WATCHDOG=y
 # Watchdog Device Drivers
 #
 # CONFIG_SOFT_WATCHDOG is not set
-CONFIG_83xx_WDT=y
+# CONFIG_ALIM7101_WDT is not set
+# CONFIG_8xxx_WDT is not set
+# CONFIG_WATCHDOG_RTAS is not set
+
+#
+# PCI-based Watchdog Cards
+#
+# CONFIG_PCIPCWATCHDOG is not set
+# CONFIG_WDTPCI is not set
 
 #
 # Sonics Silicon Backplane
@@ -603,8 +755,10 @@ CONFIG_SSB_POSSIBLE=y
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
 
 #
 # Multimedia devices
@@ -625,6 +779,8 @@ CONFIG_SSB_POSSIBLE=y
 #
 # Graphics support
 #
+# CONFIG_AGP is not set
+# CONFIG_DRM is not set
 # CONFIG_VGASTATE is not set
 # CONFIG_VIDEO_OUTPUT_CONTROL is not set
 # CONFIG_FB is not set
@@ -634,10 +790,6 @@ CONFIG_SSB_POSSIBLE=y
 # Display device support
 #
 # CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Sound
-#
 # CONFIG_SOUND is not set
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
@@ -648,6 +800,7 @@ CONFIG_HID=y
 # CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
 # CONFIG_ACCESSIBILITY is not set
+# CONFIG_INFINIBAND is not set
 # CONFIG_EDAC is not set
 # CONFIG_RTC_CLASS is not set
 # CONFIG_DMADEVICES is not set
@@ -710,6 +863,7 @@ CONFIG_TMPFS=y
 # CONFIG_CRAMFS is not set
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
 # CONFIG_ROMFS_FS is not set
@@ -720,14 +874,13 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
-# CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_BIND34 is not set
 CONFIG_RPCSEC_GSS_KRB5=y
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -740,6 +893,7 @@ CONFIG_RPCSEC_GSS_KRB5=y
 # Partition Types
 #
 # CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MAC_PARTITION=y
 CONFIG_MSDOS_PARTITION=y
 # CONFIG_NLS is not set
 # CONFIG_DLM is not set
@@ -751,6 +905,7 @@ CONFIG_BITREVERSE=y
 # CONFIG_GENERIC_FIND_FIRST_BIT is not set
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
 # CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
@@ -774,8 +929,18 @@ CONFIG_FRAME_WARN=1024
 # CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+# CONFIG_FTRACE is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
 # CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_IRQSTACKS is not set
+# CONFIG_BOOTX_TEXT is not set
 # CONFIG_PPC_EARLY_DEBUG is not set
 
 #
@@ -829,6 +994,10 @@ CONFIG_CRYPTO_PCBC=m
 # CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=y
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
 # CONFIG_CRYPTO_SHA1 is not set
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
diff --git a/arch/powerpc/configs/85xx/ksi8560_defconfig b/arch/powerpc/configs/85xx/ksi8560_defconfig
index b82bb042308a..8bb89f26a20d 100644
--- a/arch/powerpc/configs/85xx/ksi8560_defconfig
+++ b/arch/powerpc/configs/85xx/ksi8560_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc5
-# Mon Jun  9 08:52:30 2008
+# Linux kernel version: 2.6.27-rc4
+# Thu Aug 21 00:52:28 2008
 #
 # CONFIG_PPC64 is not set
 
@@ -15,6 +15,7 @@ CONFIG_PPC_85xx=y
 # CONFIG_44x is not set
 # CONFIG_E200 is not set
 CONFIG_E500=y
+# CONFIG_PPC_E500MC is not set
 CONFIG_BOOKE=y
 CONFIG_FSL_BOOKE=y
 CONFIG_FSL_EMB_PERFMON=y
@@ -33,12 +34,14 @@ CONFIG_GENERIC_HARDIRQS=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_GENERIC_GPIO=y
 # CONFIG_ARCH_NO_VIRT_TO_BUS is not set
 CONFIG_PPC=y
 CONFIG_EARLY_PRINTK=y
@@ -85,7 +88,6 @@ CONFIG_INITRAMFS_SOURCE=""
 CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
@@ -110,10 +112,16 @@ CONFIG_SLUB=y
 # CONFIG_PROFILING is not set
 # CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
+CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
 # CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+CONFIG_HAVE_CLK=y
 CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
@@ -124,6 +132,7 @@ CONFIG_BLOCK=y
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -142,8 +151,6 @@ CONFIG_CLASSIC_RCU=y
 #
 # Platform support
 #
-# CONFIG_PPC_MPC512x is not set
-# CONFIG_PPC_MPC5121 is not set
 # CONFIG_PPC_CELL is not set
 # CONFIG_PPC_CELL_NATIVE is not set
 # CONFIG_PQ2ADS is not set
@@ -152,11 +159,13 @@ CONFIG_MPC85xx=y
 # CONFIG_MPC8560_ADS is not set
 # CONFIG_MPC85xx_CDS is not set
 # CONFIG_MPC85xx_MDS is not set
+# CONFIG_MPC8536_DS is not set
 # CONFIG_MPC85xx_DS is not set
 CONFIG_KSI8560=y
 # CONFIG_STX_GP3 is not set
 # CONFIG_TQM8540 is not set
 # CONFIG_TQM8541 is not set
+# CONFIG_TQM8548 is not set
 # CONFIG_TQM8555 is not set
 # CONFIG_TQM8560 is not set
 # CONFIG_SBC8548 is not set
@@ -173,7 +182,6 @@ CONFIG_MPIC=y
 # CONFIG_GENERIC_IOMAP is not set
 # CONFIG_CPU_FREQ is not set
 CONFIG_CPM2=y
-CONFIG_PPC_CPM_NEW_BINDING=y
 # CONFIG_FSL_ULI1575 is not set
 CONFIG_CPM=y
 
@@ -213,6 +221,7 @@ CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_MIGRATION=y
 # CONFIG_RESOURCES_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
@@ -220,6 +229,7 @@ CONFIG_VIRT_TO_BUS=y
 CONFIG_FORCE_MAX_ZONEORDER=11
 # CONFIG_PROC_DEVICETREE is not set
 # CONFIG_CMDLINE_BOOL is not set
+CONFIG_EXTRA_TARGETS=""
 # CONFIG_PM is not set
 # CONFIG_SECCOMP is not set
 CONFIG_ISA_DMA_API=y
@@ -229,6 +239,7 @@ CONFIG_ISA_DMA_API=y
 #
 CONFIG_ZONE_DMA=y
 CONFIG_FSL_SOC=y
+CONFIG_PPC_PCI_CHOICE=y
 # CONFIG_PCI is not set
 # CONFIG_PCI_DOMAINS is not set
 # CONFIG_PCI_SYSCALL is not set
@@ -250,10 +261,6 @@ CONFIG_KERNEL_START=0xc0000000
 CONFIG_PHYSICAL_START=0x00000000
 CONFIG_PHYSICAL_ALIGN=0x10000000
 CONFIG_TASK_SIZE=0xc0000000
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -427,6 +434,7 @@ CONFIG_MTD_PHYSMAP_OF=y
 #
 # CONFIG_MTD_UBI is not set
 CONFIG_OF_DEVICE=y
+CONFIG_OF_GPIO=y
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_FD is not set
@@ -440,12 +448,12 @@ CONFIG_BLK_DEV_RAM_SIZE=32768
 # CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
 CONFIG_HAVE_IDE=y
 CONFIG_IDE=y
-CONFIG_IDE_MAX_HWIFS=4
 CONFIG_BLK_DEV_IDE=y
 
 #
@@ -463,11 +471,8 @@ CONFIG_IDE_PROC_FS=y
 #
 # IDE chipset support/bugfixes
 #
-CONFIG_IDE_GENERIC=y
 # CONFIG_BLK_DEV_PLATFORM is not set
 # CONFIG_BLK_DEV_IDEDMA is not set
-# CONFIG_BLK_DEV_HD_ONLY is not set
-# CONFIG_BLK_DEV_HD is not set
 
 #
 # SCSI device support
@@ -480,7 +485,6 @@ CONFIG_IDE_GENERIC=y
 # CONFIG_MD is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -504,6 +508,7 @@ CONFIG_MARVELL_PHY=y
 # CONFIG_REALTEK_PHY is not set
 # CONFIG_FIXED_PHY is not set
 CONFIG_MDIO_BITBANG=y
+# CONFIG_MDIO_OF_GPIO is not set
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
@@ -516,9 +521,7 @@ CONFIG_FS_ENET=y
 CONFIG_FS_ENET_HAS_FCC=y
 CONFIG_FS_ENET_MDIO_FCC=y
 CONFIG_NETDEV_1000=y
-# CONFIG_E1000E_ENABLED is not set
 CONFIG_GIANFAR=y
-CONFIG_GFAR_NAPI=y
 CONFIG_NETDEV_10000=y
 
 #
@@ -606,6 +609,23 @@ CONFIG_GEN_RTC=y
 # CONFIG_TCG_TPM is not set
 # CONFIG_I2C is not set
 # CONFIG_SPI is not set
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+# CONFIG_GPIO_SYSFS is not set
+
+#
+# I2C GPIO expanders:
+#
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 CONFIG_HWMON=y
@@ -622,6 +642,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_W83627EHF is not set
 # CONFIG_HWMON_DEBUG_CHIP is not set
 # CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
 
 #
@@ -633,8 +654,10 @@ CONFIG_SSB_POSSIBLE=y
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
 
 #
 # Multimedia devices
@@ -664,10 +687,6 @@ CONFIG_VIDEO_OUTPUT_CONTROL=y
 # Display device support
 #
 # CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Sound
-#
 # CONFIG_SOUND is not set
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
@@ -681,6 +700,10 @@ CONFIG_USB_SUPPORT=y
 # CONFIG_USB_OTG_BLACKLIST_HUB is not set
 
 #
+# Enable Host or Gadget support to see Inventra options
+#
+
+#
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
 #
 # CONFIG_USB_GADGET is not set
@@ -759,6 +782,7 @@ CONFIG_TMPFS=y
 # CONFIG_CRAMFS is not set
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
 # CONFIG_ROMFS_FS is not set
@@ -768,12 +792,11 @@ CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 # CONFIG_NFS_V3 is not set
 # CONFIG_NFS_V4 is not set
-# CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
 CONFIG_LOCKD=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -809,6 +832,7 @@ CONFIG_BITREVERSE=y
 # CONFIG_GENERIC_FIND_FIRST_BIT is not set
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
 # CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
@@ -833,6 +857,8 @@ CONFIG_DEBUG_FS=y
 CONFIG_DEBUG_KERNEL=y
 # CONFIG_DEBUG_SHIRQ is not set
 CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
 CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
@@ -851,17 +877,29 @@ CONFIG_DEBUG_MUTEXES=y
 # CONFIG_DEBUG_INFO is not set
 # CONFIG_DEBUG_VM is not set
 # CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+# CONFIG_FTRACE is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
 # CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
 # CONFIG_DEBUG_PAGEALLOC is not set
-# CONFIG_DEBUGGER is not set
-# CONFIG_KGDB_CONSOLE is not set
+# CONFIG_CODE_PATCHING_SELFTEST is not set
+# CONFIG_FTR_FIXUP_SELFTEST is not set
+# CONFIG_XMON is not set
 # CONFIG_IRQSTACKS is not set
 # CONFIG_VIRQ_DEBUG is not set
 # CONFIG_BDI_SWITCH is not set
@@ -915,6 +953,10 @@ CONFIG_CRYPTO=y
 # CONFIG_CRYPTO_MD4 is not set
 # CONFIG_CRYPTO_MD5 is not set
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
 # CONFIG_CRYPTO_SHA1 is not set
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
@@ -946,6 +988,7 @@ CONFIG_CRYPTO=y
 # CONFIG_CRYPTO_DEFLATE is not set
 # CONFIG_CRYPTO_LZO is not set
 CONFIG_CRYPTO_HW=y
-# CONFIG_PPC_CLOCK is not set
+# CONFIG_CRYPTO_DEV_TALITOS is not set
+CONFIG_PPC_CLOCK=y
 CONFIG_PPC_LIB_RHEAP=y
 # CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/mpc8536_ds_defconfig b/arch/powerpc/configs/85xx/mpc8536_ds_defconfig
index f1e2931de5da..6b516bea6e75 100644
--- a/arch/powerpc/configs/mpc8536_ds_defconfig
+++ b/arch/powerpc/configs/85xx/mpc8536_ds_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc8
-# Wed Jul  2 01:34:26 2008
+# Linux kernel version: 2.6.27-rc4
+# Thu Aug 21 07:18:18 2008
 #
 # CONFIG_PPC64 is not set
 
@@ -34,6 +34,7 @@ CONFIG_GENERIC_HARDIRQS=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
@@ -93,7 +94,6 @@ CONFIG_INITRAMFS_SOURCE=""
 CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
 CONFIG_KALLSYMS_EXTRA_PASS=y
@@ -119,10 +119,16 @@ CONFIG_SLUB=y
 # CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
+CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
 # CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+# CONFIG_HAVE_CLK is not set
 CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
@@ -139,6 +145,7 @@ CONFIG_LBD=y
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -157,8 +164,6 @@ CONFIG_CLASSIC_RCU=y
 #
 # Platform support
 #
-# CONFIG_PPC_MPC512x is not set
-# CONFIG_PPC_MPC5121 is not set
 # CONFIG_PPC_CELL is not set
 # CONFIG_PPC_CELL_NATIVE is not set
 # CONFIG_PQ2ADS is not set
@@ -205,7 +210,7 @@ CONFIG_HZ_250=y
 # CONFIG_HZ_300 is not set
 # CONFIG_HZ_1000 is not set
 CONFIG_HZ=250
-# CONFIG_SCHED_HRTICK is not set
+CONFIG_SCHED_HRTICK=y
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
@@ -228,6 +233,7 @@ CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_MIGRATION=y
 # CONFIG_RESOURCES_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
@@ -235,6 +241,7 @@ CONFIG_VIRT_TO_BUS=y
 CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
+CONFIG_EXTRA_TARGETS=""
 # CONFIG_PM is not set
 CONFIG_SECCOMP=y
 CONFIG_ISA_DMA_API=y
@@ -246,6 +253,7 @@ CONFIG_ZONE_DMA=y
 CONFIG_PPC_INDIRECT_PCI=y
 CONFIG_FSL_SOC=y
 CONFIG_FSL_PCI=y
+CONFIG_PPC_PCI_CHOICE=y
 CONFIG_PCI=y
 CONFIG_PCI_DOMAINS=y
 CONFIG_PCI_SYSCALL=y
@@ -272,10 +280,6 @@ CONFIG_KERNEL_START=0xc0000000
 CONFIG_PHYSICAL_START=0x00000000
 CONFIG_PHYSICAL_ALIGN=0x10000000
 CONFIG_TASK_SIZE=0xc0000000
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -401,6 +405,8 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_DEBUG_DRIVER is not set
 # CONFIG_DEBUG_DEVRES is not set
 # CONFIG_SYS_HYPERVISOR is not set
@@ -427,12 +433,14 @@ CONFIG_BLK_DEV_RAM_SIZE=524288
 # CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_PHANTOM is not set
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_HP_ILO is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -512,6 +520,7 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_NSP32 is not set
 # CONFIG_SCSI_DEBUG is not set
 # CONFIG_SCSI_SRP is not set
+# CONFIG_SCSI_DH is not set
 CONFIG_ATA=y
 # CONFIG_ATA_NONSTANDARD is not set
 CONFIG_SATA_PMP=y
@@ -588,7 +597,6 @@ CONFIG_SATA_SIL=y
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 CONFIG_DUMMY=y
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -632,7 +640,6 @@ CONFIG_NETDEV_1000=y
 # CONFIG_DL2K is not set
 # CONFIG_E1000 is not set
 # CONFIG_E1000E is not set
-# CONFIG_E1000E_ENABLED is not set
 # CONFIG_IP1000 is not set
 # CONFIG_IGB is not set
 # CONFIG_NS83820 is not set
@@ -648,9 +655,9 @@ CONFIG_SKY2=y
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
 CONFIG_GIANFAR=y
-CONFIG_GFAR_NAPI=y
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
+# CONFIG_ATL1E is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
 # CONFIG_CHELSIO_T3 is not set
@@ -727,12 +734,14 @@ CONFIG_SERIO_SERPORT=y
 # CONFIG_SERIO_PCIPS2 is not set
 CONFIG_SERIO_LIBPS2=y
 # CONFIG_SERIO_RAW is not set
+# CONFIG_SERIO_XILINX_XPS_PS2 is not set
 # CONFIG_GAMEPORT is not set
 
 #
 # Character devices
 #
 CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
 # CONFIG_VT_HW_CONSOLE_BINDING is not set
@@ -766,7 +775,7 @@ CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_IPMI_HANDLER is not set
-# CONFIG_HW_RANDOM is not set
+CONFIG_HW_RANDOM=y
 # CONFIG_NVRAM is not set
 # CONFIG_R3964 is not set
 # CONFIG_APPLICOM is not set
@@ -776,43 +785,64 @@ CONFIG_DEVPORT=y
 CONFIG_I2C=y
 CONFIG_I2C_BOARDINFO=y
 # CONFIG_I2C_CHARDEV is not set
+CONFIG_I2C_HELPER_AUTO=y
 
 #
 # I2C Hardware Bus support
 #
+
+#
+# PC SMBus host controller drivers
+#
 # CONFIG_I2C_ALI1535 is not set
 # CONFIG_I2C_ALI1563 is not set
 # CONFIG_I2C_ALI15X3 is not set
 # CONFIG_I2C_AMD756 is not set
 # CONFIG_I2C_AMD8111 is not set
 # CONFIG_I2C_I801 is not set
-# CONFIG_I2C_I810 is not set
+# CONFIG_I2C_ISCH is not set
 # CONFIG_I2C_PIIX4 is not set
-CONFIG_I2C_MPC=y
 # CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_PROSAVAGE is not set
-# CONFIG_I2C_SAVAGE4 is not set
-# CONFIG_I2C_SIMTEC is not set
 # CONFIG_I2C_SIS5595 is not set
 # CONFIG_I2C_SIS630 is not set
 # CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_TINY_USB is not set
 # CONFIG_I2C_VIA is not set
 # CONFIG_I2C_VIAPRO is not set
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+CONFIG_I2C_MPC=y
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Graphics adapter I2C/DDC channel drivers
+#
 # CONFIG_I2C_VOODOO3 is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
 # CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
 
 #
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
+# CONFIG_AT24 is not set
 CONFIG_SENSORS_EEPROM=y
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
@@ -821,6 +851,8 @@ CONFIG_SENSORS_EEPROM=y
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
 # CONFIG_SPI is not set
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+# CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
@@ -836,8 +868,10 @@ CONFIG_SSB_POSSIBLE=y
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
 
 #
 # Multimedia devices
@@ -879,6 +913,7 @@ CONFIG_DVB_CAPTURE_DRIVERS=y
 # CONFIG_DVB_TTUSB_BUDGET is not set
 # CONFIG_DVB_TTUSB_DEC is not set
 # CONFIG_DVB_CINERGYT2 is not set
+# CONFIG_DVB_SIANO_SMS1XXX is not set
 
 #
 # Supported FlexCopII (B2C2) Adapters
@@ -925,6 +960,7 @@ CONFIG_DVB_CAPTURE_DRIVERS=y
 # CONFIG_DVB_SP887X is not set
 # CONFIG_DVB_CX22700 is not set
 # CONFIG_DVB_CX22702 is not set
+# CONFIG_DVB_DRX397XD is not set
 # CONFIG_DVB_L64781 is not set
 # CONFIG_DVB_TDA1004X is not set
 # CONFIG_DVB_NXT6000 is not set
@@ -992,15 +1028,7 @@ CONFIG_VIDEO_OUTPUT_CONTROL=y
 CONFIG_VGA_CONSOLE=y
 # CONFIG_VGACON_SOFT_SCROLLBACK is not set
 CONFIG_DUMMY_CONSOLE=y
-
-#
-# Sound
-#
 CONFIG_SOUND=y
-
-#
-# Advanced Linux Sound Architecture
-#
 CONFIG_SND=y
 CONFIG_SND_TIMER=y
 CONFIG_SND_PCM=y
@@ -1012,19 +1040,15 @@ CONFIG_SND_SUPPORT_OLD_API=y
 CONFIG_SND_VERBOSE_PROCFS=y
 # CONFIG_SND_VERBOSE_PRINTK is not set
 # CONFIG_SND_DEBUG is not set
-
-#
-# Generic devices
-#
+CONFIG_SND_VMASTER=y
 CONFIG_SND_AC97_CODEC=y
+CONFIG_SND_DRIVERS=y
 # CONFIG_SND_DUMMY is not set
 # CONFIG_SND_MTPAV is not set
 # CONFIG_SND_SERIAL_U16550 is not set
 # CONFIG_SND_MPU401 is not set
-
-#
-# PCI devices
-#
+# CONFIG_SND_AC97_POWER_SAVE is not set
+CONFIG_SND_PCI=y
 # CONFIG_SND_AD1889 is not set
 # CONFIG_SND_ALS300 is not set
 # CONFIG_SND_ALS4000 is not set
@@ -1086,39 +1110,12 @@ CONFIG_SND_INTEL8X0=y
 # CONFIG_SND_VIRTUOSO is not set
 # CONFIG_SND_VX222 is not set
 # CONFIG_SND_YMFPCI is not set
-# CONFIG_SND_AC97_POWER_SAVE is not set
-
-#
-# ALSA PowerMac devices
-#
-
-#
-# ALSA PowerPC devices
-#
-
-#
-# USB devices
-#
+CONFIG_SND_PPC=y
+CONFIG_SND_USB=y
 # CONFIG_SND_USB_AUDIO is not set
 # CONFIG_SND_USB_USX2Y is not set
 # CONFIG_SND_USB_CAIAQ is not set
-
-#
-# System on Chip audio support
-#
 # CONFIG_SND_SOC is not set
-
-#
-# ALSA SoC audio for Freescale SOCs
-#
-
-#
-# SoC Audio for the Texas Instruments OMAP
-#
-
-#
-# Open Sound System
-#
 # CONFIG_SOUND_PRIME is not set
 CONFIG_AC97_BUS=y
 CONFIG_HID_SUPPORT=y
@@ -1150,6 +1147,7 @@ CONFIG_USB_DEVICE_CLASS=y
 # CONFIG_USB_OTG is not set
 # CONFIG_USB_OTG_WHITELIST is not set
 # CONFIG_USB_OTG_BLACKLIST_HUB is not set
+CONFIG_USB_MON=y
 
 #
 # USB Host Controller Drivers
@@ -1201,6 +1199,7 @@ CONFIG_USB_STORAGE=y
 # CONFIG_USB_STORAGE_ALAUDA is not set
 # CONFIG_USB_STORAGE_ONETOUCH is not set
 # CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_SIERRA is not set
 # CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
 # CONFIG_USB_LIBUSUAL is not set
 
@@ -1209,7 +1208,6 @@ CONFIG_USB_STORAGE=y
 #
 # CONFIG_USB_MDC800 is not set
 # CONFIG_USB_MICROTEK is not set
-CONFIG_USB_MON=y
 
 #
 # USB port drivers
@@ -1222,7 +1220,6 @@ CONFIG_USB_MON=y
 # CONFIG_USB_EMI62 is not set
 # CONFIG_USB_EMI26 is not set
 # CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_AUERSWALD is not set
 # CONFIG_USB_RIO500 is not set
 # CONFIG_USB_LEGOTOWER is not set
 # CONFIG_USB_LCD is not set
@@ -1310,6 +1307,7 @@ CONFIG_DMA_ENGINE=y
 # DMA Clients
 #
 # CONFIG_NET_DMA is not set
+# CONFIG_DMATEST is not set
 # CONFIG_UIO is not set
 
 #
@@ -1387,6 +1385,7 @@ CONFIG_EFS_FS=m
 CONFIG_CRAMFS=y
 CONFIG_VXFS_FS=m
 # CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 CONFIG_HPFS_FS=m
 CONFIG_QNX4FS_FS=m
 # CONFIG_ROMFS_FS is not set
@@ -1399,17 +1398,16 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
+CONFIG_ROOT_NFS=y
 CONFIG_NFSD=y
 # CONFIG_NFSD_V3 is not set
 # CONFIG_NFSD_V4 is not set
-CONFIG_ROOT_NFS=y
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_EXPORTFS=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_BIND34 is not set
 CONFIG_RPCSEC_GSS_KRB5=y
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -1488,6 +1486,7 @@ CONFIG_BITREVERSE=y
 # CONFIG_GENERIC_FIND_FIRST_BIT is not set
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
+CONFIG_CRC_T10DIF=y
 CONFIG_CRC_ITU_T=m
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
@@ -1513,6 +1512,8 @@ CONFIG_DEBUG_FS=y
 CONFIG_DEBUG_KERNEL=y
 # CONFIG_DEBUG_SHIRQ is not set
 CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
 CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
@@ -1531,19 +1532,29 @@ CONFIG_SCHED_DEBUG=y
 CONFIG_DEBUG_INFO=y
 # CONFIG_DEBUG_VM is not set
 # CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+# CONFIG_FTRACE is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
 # CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
 # CONFIG_DEBUG_PAGEALLOC is not set
-# CONFIG_DEBUGGER is not set
 # CONFIG_CODE_PATCHING_SELFTEST is not set
 # CONFIG_FTR_FIXUP_SELFTEST is not set
+# CONFIG_XMON is not set
 # CONFIG_IRQSTACKS is not set
 # CONFIG_VIRQ_DEBUG is not set
 # CONFIG_BDI_SWITCH is not set
@@ -1561,13 +1572,14 @@ CONFIG_CRYPTO=y
 # Crypto core or helper
 #
 CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_AEAD=y
 CONFIG_CRYPTO_BLKCIPHER=y
 CONFIG_CRYPTO_HASH=y
 CONFIG_CRYPTO_MANAGER=y
 # CONFIG_CRYPTO_GF128MUL is not set
 # CONFIG_CRYPTO_NULL is not set
 # CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
+CONFIG_CRYPTO_AUTHENC=y
 # CONFIG_CRYPTO_TEST is not set
 
 #
@@ -1601,6 +1613,10 @@ CONFIG_CRYPTO_HMAC=y
 # CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=y
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
 CONFIG_CRYPTO_SHA1=m
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
@@ -1633,5 +1649,6 @@ CONFIG_CRYPTO_DES=y
 # CONFIG_CRYPTO_LZO is not set
 CONFIG_CRYPTO_HW=y
 # CONFIG_CRYPTO_DEV_HIFN_795X is not set
+CONFIG_CRYPTO_DEV_TALITOS=y
 # CONFIG_PPC_CLOCK is not set
 # CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/85xx/mpc8540_ads_defconfig b/arch/powerpc/configs/85xx/mpc8540_ads_defconfig
index f33fd516fd54..1ea181f826f1 100644
--- a/arch/powerpc/configs/85xx/mpc8540_ads_defconfig
+++ b/arch/powerpc/configs/85xx/mpc8540_ads_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc5
-# Mon Jun  9 08:52:31 2008
+# Linux kernel version: 2.6.27-rc4
+# Thu Aug 21 00:52:30 2008
 #
 # CONFIG_PPC64 is not set
 
@@ -15,6 +15,7 @@ CONFIG_PPC_85xx=y
 # CONFIG_44x is not set
 # CONFIG_E200 is not set
 CONFIG_E500=y
+# CONFIG_PPC_E500MC is not set
 CONFIG_BOOKE=y
 CONFIG_FSL_BOOKE=y
 CONFIG_FSL_EMB_PERFMON=y
@@ -33,6 +34,7 @@ CONFIG_GENERIC_HARDIRQS=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
@@ -89,7 +91,6 @@ CONFIG_INITRAMFS_SOURCE=""
 CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
@@ -114,10 +115,16 @@ CONFIG_SLUB=y
 # CONFIG_PROFILING is not set
 # CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
+CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
 # CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+# CONFIG_HAVE_CLK is not set
 CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
@@ -128,6 +135,7 @@ CONFIG_BLOCK=y
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -146,8 +154,6 @@ CONFIG_CLASSIC_RCU=y
 #
 # Platform support
 #
-# CONFIG_PPC_MPC512x is not set
-# CONFIG_PPC_MPC5121 is not set
 # CONFIG_PPC_CELL is not set
 # CONFIG_PPC_CELL_NATIVE is not set
 # CONFIG_PQ2ADS is not set
@@ -156,11 +162,13 @@ CONFIG_MPC8540_ADS=y
 # CONFIG_MPC8560_ADS is not set
 # CONFIG_MPC85xx_CDS is not set
 # CONFIG_MPC85xx_MDS is not set
+# CONFIG_MPC8536_DS is not set
 # CONFIG_MPC85xx_DS is not set
 # CONFIG_KSI8560 is not set
 # CONFIG_STX_GP3 is not set
 # CONFIG_TQM8540 is not set
 # CONFIG_TQM8541 is not set
+# CONFIG_TQM8548 is not set
 # CONFIG_TQM8555 is not set
 # CONFIG_TQM8560 is not set
 # CONFIG_SBC8548 is not set
@@ -192,7 +200,7 @@ CONFIG_HZ_250=y
 # CONFIG_HZ_300 is not set
 # CONFIG_HZ_1000 is not set
 CONFIG_HZ=250
-# CONFIG_SCHED_HRTICK is not set
+CONFIG_SCHED_HRTICK=y
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
@@ -215,6 +223,7 @@ CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_MIGRATION=y
 # CONFIG_RESOURCES_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
@@ -222,6 +231,7 @@ CONFIG_VIRT_TO_BUS=y
 CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
+CONFIG_EXTRA_TARGETS=""
 # CONFIG_PM is not set
 # CONFIG_SECCOMP is not set
 CONFIG_ISA_DMA_API=y
@@ -231,6 +241,7 @@ CONFIG_ISA_DMA_API=y
 #
 CONFIG_ZONE_DMA=y
 CONFIG_FSL_SOC=y
+CONFIG_PPC_PCI_CHOICE=y
 # CONFIG_PCI is not set
 # CONFIG_PCI_DOMAINS is not set
 # CONFIG_PCI_SYSCALL is not set
@@ -252,10 +263,6 @@ CONFIG_KERNEL_START=0xc0000000
 CONFIG_PHYSICAL_START=0x00000000
 CONFIG_PHYSICAL_ALIGN=0x10000000
 CONFIG_TASK_SIZE=0xc0000000
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -367,6 +374,7 @@ CONFIG_BLK_DEV_RAM_SIZE=32768
 # CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
@@ -384,7 +392,6 @@ CONFIG_HAVE_IDE=y
 # CONFIG_MD is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -416,9 +423,7 @@ CONFIG_MII=y
 # CONFIG_IBM_NEW_EMAC_EMAC4 is not set
 # CONFIG_B44 is not set
 CONFIG_NETDEV_1000=y
-# CONFIG_E1000E_ENABLED is not set
 CONFIG_GIANFAR=y
-CONFIG_GFAR_NAPI=y
 CONFIG_NETDEV_10000=y
 
 #
@@ -504,6 +509,8 @@ CONFIG_GEN_RTC=y
 # CONFIG_TCG_TPM is not set
 # CONFIG_I2C is not set
 # CONFIG_SPI is not set
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+# CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 CONFIG_HWMON=y
@@ -520,6 +527,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_W83627EHF is not set
 # CONFIG_HWMON_DEBUG_CHIP is not set
 # CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
 
 #
@@ -531,8 +539,10 @@ CONFIG_SSB_POSSIBLE=y
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
 
 #
 # Multimedia devices
@@ -562,10 +572,6 @@ CONFIG_VIDEO_OUTPUT_CONTROL=y
 # Display device support
 #
 # CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Sound
-#
 # CONFIG_SOUND is not set
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
@@ -579,6 +585,10 @@ CONFIG_USB_SUPPORT=y
 # CONFIG_USB_OTG_BLACKLIST_HUB is not set
 
 #
+# Enable Host or Gadget support to see Inventra options
+#
+
+#
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
 #
 # CONFIG_USB_GADGET is not set
@@ -655,6 +665,7 @@ CONFIG_TMPFS=y
 # CONFIG_CRAMFS is not set
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
 # CONFIG_ROMFS_FS is not set
@@ -664,12 +675,11 @@ CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 # CONFIG_NFS_V3 is not set
 # CONFIG_NFS_V4 is not set
-# CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
 CONFIG_LOCKD=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -705,6 +715,7 @@ CONFIG_BITREVERSE=y
 # CONFIG_GENERIC_FIND_FIRST_BIT is not set
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
 # CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
@@ -729,6 +740,8 @@ CONFIG_FRAME_WARN=1024
 CONFIG_DEBUG_KERNEL=y
 # CONFIG_DEBUG_SHIRQ is not set
 CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
 CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
@@ -746,16 +759,29 @@ CONFIG_DEBUG_MUTEXES=y
 # CONFIG_DEBUG_INFO is not set
 # CONFIG_DEBUG_VM is not set
 # CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+# CONFIG_FTRACE is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
 # CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
 # CONFIG_DEBUG_PAGEALLOC is not set
-# CONFIG_DEBUGGER is not set
+# CONFIG_CODE_PATCHING_SELFTEST is not set
+# CONFIG_FTR_FIXUP_SELFTEST is not set
+# CONFIG_XMON is not set
 # CONFIG_IRQSTACKS is not set
 # CONFIG_BDI_SWITCH is not set
 # CONFIG_PPC_EARLY_DEBUG is not set
@@ -808,6 +834,10 @@ CONFIG_CRYPTO=y
 # CONFIG_CRYPTO_MD4 is not set
 # CONFIG_CRYPTO_MD5 is not set
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
 # CONFIG_CRYPTO_SHA1 is not set
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
@@ -839,5 +869,6 @@ CONFIG_CRYPTO=y
 # CONFIG_CRYPTO_DEFLATE is not set
 # CONFIG_CRYPTO_LZO is not set
 CONFIG_CRYPTO_HW=y
+# CONFIG_CRYPTO_DEV_TALITOS is not set
 # CONFIG_PPC_CLOCK is not set
 # CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/85xx/mpc8544_ds_defconfig b/arch/powerpc/configs/85xx/mpc8544_ds_defconfig
index a0583e5119f5..1aecdeab9841 100644
--- a/arch/powerpc/configs/85xx/mpc8544_ds_defconfig
+++ b/arch/powerpc/configs/85xx/mpc8544_ds_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc5
-# Mon Jun  9 08:52:32 2008
+# Linux kernel version: 2.6.27-rc4
+# Thu Aug 21 07:20:43 2008
 #
 # CONFIG_PPC64 is not set
 
@@ -15,6 +15,7 @@ CONFIG_PPC_85xx=y
 # CONFIG_44x is not set
 # CONFIG_E200 is not set
 CONFIG_E500=y
+# CONFIG_PPC_E500MC is not set
 CONFIG_BOOKE=y
 CONFIG_FSL_BOOKE=y
 CONFIG_FSL_EMB_PERFMON=y
@@ -33,6 +34,7 @@ CONFIG_GENERIC_HARDIRQS=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
@@ -92,7 +94,6 @@ CONFIG_INITRAMFS_SOURCE=""
 CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
 CONFIG_KALLSYMS_EXTRA_PASS=y
@@ -118,10 +119,16 @@ CONFIG_SLUB=y
 # CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
+CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
 # CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+# CONFIG_HAVE_CLK is not set
 CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
@@ -138,6 +145,7 @@ CONFIG_LBD=y
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -156,8 +164,6 @@ CONFIG_CLASSIC_RCU=y
 #
 # Platform support
 #
-# CONFIG_PPC_MPC512x is not set
-# CONFIG_PPC_MPC5121 is not set
 # CONFIG_PPC_CELL is not set
 # CONFIG_PPC_CELL_NATIVE is not set
 # CONFIG_PQ2ADS is not set
@@ -166,11 +172,13 @@ CONFIG_MPC85xx=y
 # CONFIG_MPC8560_ADS is not set
 # CONFIG_MPC85xx_CDS is not set
 # CONFIG_MPC85xx_MDS is not set
+# CONFIG_MPC8536_DS is not set
 CONFIG_MPC85xx_DS=y
 # CONFIG_KSI8560 is not set
 # CONFIG_STX_GP3 is not set
 # CONFIG_TQM8540 is not set
 # CONFIG_TQM8541 is not set
+# CONFIG_TQM8548 is not set
 # CONFIG_TQM8555 is not set
 # CONFIG_TQM8560 is not set
 # CONFIG_SBC8548 is not set
@@ -202,7 +210,7 @@ CONFIG_HZ_250=y
 # CONFIG_HZ_300 is not set
 # CONFIG_HZ_1000 is not set
 CONFIG_HZ=250
-# CONFIG_SCHED_HRTICK is not set
+CONFIG_SCHED_HRTICK=y
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
@@ -225,6 +233,7 @@ CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_MIGRATION=y
 # CONFIG_RESOURCES_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
@@ -232,6 +241,7 @@ CONFIG_VIRT_TO_BUS=y
 CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
+CONFIG_EXTRA_TARGETS=""
 # CONFIG_PM is not set
 CONFIG_SECCOMP=y
 CONFIG_ISA_DMA_API=y
@@ -244,6 +254,7 @@ CONFIG_GENERIC_ISA_DMA=y
 CONFIG_PPC_INDIRECT_PCI=y
 CONFIG_FSL_SOC=y
 CONFIG_FSL_PCI=y
+CONFIG_PPC_PCI_CHOICE=y
 CONFIG_PCI=y
 CONFIG_PCI_DOMAINS=y
 CONFIG_PCI_SYSCALL=y
@@ -270,10 +281,6 @@ CONFIG_KERNEL_START=0xc0000000
 CONFIG_PHYSICAL_START=0x00000000
 CONFIG_PHYSICAL_ALIGN=0x10000000
 CONFIG_TASK_SIZE=0xc0000000
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -399,6 +406,8 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_DEBUG_DRIVER is not set
 # CONFIG_DEBUG_DEVRES is not set
 # CONFIG_SYS_HYPERVISOR is not set
@@ -425,12 +434,14 @@ CONFIG_BLK_DEV_RAM_SIZE=131072
 # CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_PHANTOM is not set
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_HP_ILO is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -510,6 +521,7 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_NSP32 is not set
 # CONFIG_SCSI_DEBUG is not set
 # CONFIG_SCSI_SRP is not set
+# CONFIG_SCSI_DH is not set
 CONFIG_ATA=y
 # CONFIG_ATA_NONSTANDARD is not set
 CONFIG_SATA_PMP=y
@@ -577,12 +589,15 @@ CONFIG_PATA_ALI=y
 #
 # IEEE 1394 (FireWire) support
 #
+
+#
+# Enable only one of the two stacks, unless you know what you are doing
+#
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 CONFIG_DUMMY=y
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -626,7 +641,6 @@ CONFIG_NETDEV_1000=y
 # CONFIG_DL2K is not set
 # CONFIG_E1000 is not set
 # CONFIG_E1000E is not set
-# CONFIG_E1000E_ENABLED is not set
 # CONFIG_IP1000 is not set
 # CONFIG_IGB is not set
 # CONFIG_NS83820 is not set
@@ -640,9 +654,9 @@ CONFIG_NETDEV_1000=y
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
 CONFIG_GIANFAR=y
-CONFIG_GFAR_NAPI=y
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
+# CONFIG_ATL1E is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
 # CONFIG_CHELSIO_T3 is not set
@@ -719,12 +733,14 @@ CONFIG_SERIO_SERPORT=y
 # CONFIG_SERIO_PCIPS2 is not set
 CONFIG_SERIO_LIBPS2=y
 # CONFIG_SERIO_RAW is not set
+# CONFIG_SERIO_XILINX_XPS_PS2 is not set
 # CONFIG_GAMEPORT is not set
 
 #
 # Character devices
 #
 CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
 # CONFIG_VT_HW_CONSOLE_BINDING is not set
@@ -758,7 +774,7 @@ CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_IPMI_HANDLER is not set
-# CONFIG_HW_RANDOM is not set
+CONFIG_HW_RANDOM=y
 CONFIG_NVRAM=y
 # CONFIG_R3964 is not set
 # CONFIG_APPLICOM is not set
@@ -768,43 +784,64 @@ CONFIG_DEVPORT=y
 CONFIG_I2C=y
 CONFIG_I2C_BOARDINFO=y
 # CONFIG_I2C_CHARDEV is not set
+CONFIG_I2C_HELPER_AUTO=y
 
 #
 # I2C Hardware Bus support
 #
+
+#
+# PC SMBus host controller drivers
+#
 # CONFIG_I2C_ALI1535 is not set
 # CONFIG_I2C_ALI1563 is not set
 # CONFIG_I2C_ALI15X3 is not set
 # CONFIG_I2C_AMD756 is not set
 # CONFIG_I2C_AMD8111 is not set
 # CONFIG_I2C_I801 is not set
-# CONFIG_I2C_I810 is not set
+# CONFIG_I2C_ISCH is not set
 # CONFIG_I2C_PIIX4 is not set
-CONFIG_I2C_MPC=y
 # CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_PROSAVAGE is not set
-# CONFIG_I2C_SAVAGE4 is not set
-# CONFIG_I2C_SIMTEC is not set
 # CONFIG_I2C_SIS5595 is not set
 # CONFIG_I2C_SIS630 is not set
 # CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_TINY_USB is not set
 # CONFIG_I2C_VIA is not set
 # CONFIG_I2C_VIAPRO is not set
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+CONFIG_I2C_MPC=y
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Graphics adapter I2C/DDC channel drivers
+#
 # CONFIG_I2C_VOODOO3 is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
 # CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
 
 #
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
+# CONFIG_AT24 is not set
 CONFIG_SENSORS_EEPROM=y
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
@@ -813,10 +850,13 @@ CONFIG_SENSORS_EEPROM=y
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
 # CONFIG_SPI is not set
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+# CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 # CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
 
 #
@@ -828,8 +868,10 @@ CONFIG_SSB_POSSIBLE=y
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
 
 #
 # Multimedia devices
@@ -871,6 +913,7 @@ CONFIG_DVB_CAPTURE_DRIVERS=y
 # CONFIG_DVB_TTUSB_BUDGET is not set
 # CONFIG_DVB_TTUSB_DEC is not set
 # CONFIG_DVB_CINERGYT2 is not set
+# CONFIG_DVB_SIANO_SMS1XXX is not set
 
 #
 # Supported FlexCopII (B2C2) Adapters
@@ -917,6 +960,7 @@ CONFIG_DVB_CAPTURE_DRIVERS=y
 # CONFIG_DVB_SP887X is not set
 # CONFIG_DVB_CX22700 is not set
 # CONFIG_DVB_CX22702 is not set
+# CONFIG_DVB_DRX397XD is not set
 # CONFIG_DVB_L64781 is not set
 # CONFIG_DVB_TDA1004X is not set
 # CONFIG_DVB_NXT6000 is not set
@@ -984,15 +1028,7 @@ CONFIG_VIDEO_OUTPUT_CONTROL=y
 CONFIG_VGA_CONSOLE=y
 # CONFIG_VGACON_SOFT_SCROLLBACK is not set
 CONFIG_DUMMY_CONSOLE=y
-
-#
-# Sound
-#
 CONFIG_SOUND=y
-
-#
-# Advanced Linux Sound Architecture
-#
 CONFIG_SND=y
 CONFIG_SND_TIMER=y
 CONFIG_SND_PCM=y
@@ -1006,19 +1042,15 @@ CONFIG_SND_PCM_OSS_PLUGINS=y
 CONFIG_SND_VERBOSE_PROCFS=y
 # CONFIG_SND_VERBOSE_PRINTK is not set
 # CONFIG_SND_DEBUG is not set
-
-#
-# Generic devices
-#
+CONFIG_SND_VMASTER=y
 CONFIG_SND_AC97_CODEC=y
+CONFIG_SND_DRIVERS=y
 # CONFIG_SND_DUMMY is not set
 # CONFIG_SND_MTPAV is not set
 # CONFIG_SND_SERIAL_U16550 is not set
 # CONFIG_SND_MPU401 is not set
-
-#
-# PCI devices
-#
+# CONFIG_SND_AC97_POWER_SAVE is not set
+CONFIG_SND_PCI=y
 # CONFIG_SND_AD1889 is not set
 # CONFIG_SND_ALS300 is not set
 # CONFIG_SND_ALS4000 is not set
@@ -1080,39 +1112,12 @@ CONFIG_SND_INTEL8X0=y
 # CONFIG_SND_VIRTUOSO is not set
 # CONFIG_SND_VX222 is not set
 # CONFIG_SND_YMFPCI is not set
-# CONFIG_SND_AC97_POWER_SAVE is not set
-
-#
-# ALSA PowerMac devices
-#
-
-#
-# ALSA PowerPC devices
-#
-
-#
-# USB devices
-#
+CONFIG_SND_PPC=y
+CONFIG_SND_USB=y
 # CONFIG_SND_USB_AUDIO is not set
 # CONFIG_SND_USB_USX2Y is not set
 # CONFIG_SND_USB_CAIAQ is not set
-
-#
-# System on Chip audio support
-#
 # CONFIG_SND_SOC is not set
-
-#
-# ALSA SoC audio for Freescale SOCs
-#
-
-#
-# SoC Audio for the Texas Instruments OMAP
-#
-
-#
-# Open Sound System
-#
 # CONFIG_SOUND_PRIME is not set
 CONFIG_AC97_BUS=y
 CONFIG_HID_SUPPORT=y
@@ -1144,6 +1149,7 @@ CONFIG_USB_DEVICE_CLASS=y
 # CONFIG_USB_OTG is not set
 # CONFIG_USB_OTG_WHITELIST is not set
 # CONFIG_USB_OTG_BLACKLIST_HUB is not set
+CONFIG_USB_MON=y
 
 #
 # USB Host Controller Drivers
@@ -1195,6 +1201,7 @@ CONFIG_USB_STORAGE=y
 # CONFIG_USB_STORAGE_ALAUDA is not set
 # CONFIG_USB_STORAGE_ONETOUCH is not set
 # CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_SIERRA is not set
 # CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
 # CONFIG_USB_LIBUSUAL is not set
 
@@ -1203,7 +1210,6 @@ CONFIG_USB_STORAGE=y
 #
 # CONFIG_USB_MDC800 is not set
 # CONFIG_USB_MICROTEK is not set
-CONFIG_USB_MON=y
 
 #
 # USB port drivers
@@ -1216,7 +1222,6 @@ CONFIG_USB_MON=y
 # CONFIG_USB_EMI62 is not set
 # CONFIG_USB_EMI26 is not set
 # CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_AUERSWALD is not set
 # CONFIG_USB_RIO500 is not set
 # CONFIG_USB_LEGOTOWER is not set
 # CONFIG_USB_LCD is not set
@@ -1270,6 +1275,7 @@ CONFIG_RTC_INTF_DEV=y
 # CONFIG_RTC_DRV_PCF8583 is not set
 # CONFIG_RTC_DRV_M41T80 is not set
 # CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
 
 #
 # SPI RTC drivers
@@ -1303,6 +1309,7 @@ CONFIG_DMA_ENGINE=y
 # DMA Clients
 #
 # CONFIG_NET_DMA is not set
+# CONFIG_DMATEST is not set
 # CONFIG_UIO is not set
 
 #
@@ -1379,6 +1386,7 @@ CONFIG_EFS_FS=m
 CONFIG_CRAMFS=y
 CONFIG_VXFS_FS=m
 # CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 CONFIG_HPFS_FS=m
 CONFIG_QNX4FS_FS=m
 # CONFIG_ROMFS_FS is not set
@@ -1391,17 +1399,16 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
+CONFIG_ROOT_NFS=y
 CONFIG_NFSD=y
 # CONFIG_NFSD_V3 is not set
 # CONFIG_NFSD_V4 is not set
-CONFIG_ROOT_NFS=y
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_EXPORTFS=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_BIND34 is not set
 CONFIG_RPCSEC_GSS_KRB5=y
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -1480,6 +1487,7 @@ CONFIG_BITREVERSE=y
 # CONFIG_GENERIC_FIND_FIRST_BIT is not set
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
+CONFIG_CRC_T10DIF=y
 CONFIG_CRC_ITU_T=m
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
@@ -1505,6 +1513,8 @@ CONFIG_FRAME_WARN=1024
 CONFIG_DEBUG_KERNEL=y
 # CONFIG_DEBUG_SHIRQ is not set
 CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
 CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
@@ -1523,17 +1533,29 @@ CONFIG_SCHED_DEBUG=y
 CONFIG_DEBUG_INFO=y
 # CONFIG_DEBUG_VM is not set
 # CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+# CONFIG_FTRACE is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
 # CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
 # CONFIG_DEBUG_PAGEALLOC is not set
-# CONFIG_DEBUGGER is not set
+# CONFIG_CODE_PATCHING_SELFTEST is not set
+# CONFIG_FTR_FIXUP_SELFTEST is not set
+# CONFIG_XMON is not set
 # CONFIG_IRQSTACKS is not set
 # CONFIG_BDI_SWITCH is not set
 # CONFIG_PPC_EARLY_DEBUG is not set
@@ -1550,13 +1572,14 @@ CONFIG_CRYPTO=y
 # Crypto core or helper
 #
 CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_AEAD=y
 CONFIG_CRYPTO_BLKCIPHER=y
 CONFIG_CRYPTO_HASH=y
 CONFIG_CRYPTO_MANAGER=y
 # CONFIG_CRYPTO_GF128MUL is not set
 # CONFIG_CRYPTO_NULL is not set
 # CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
+CONFIG_CRYPTO_AUTHENC=y
 # CONFIG_CRYPTO_TEST is not set
 
 #
@@ -1590,6 +1613,10 @@ CONFIG_CRYPTO_HMAC=y
 # CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=y
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
 CONFIG_CRYPTO_SHA1=m
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
@@ -1622,5 +1649,6 @@ CONFIG_CRYPTO_DES=y
 # CONFIG_CRYPTO_LZO is not set
 CONFIG_CRYPTO_HW=y
 # CONFIG_CRYPTO_DEV_HIFN_795X is not set
+CONFIG_CRYPTO_DEV_TALITOS=y
 # CONFIG_PPC_CLOCK is not set
 # CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/85xx/mpc8560_ads_defconfig b/arch/powerpc/configs/85xx/mpc8560_ads_defconfig
index e19592b42043..06e26d906f65 100644
--- a/arch/powerpc/configs/85xx/mpc8560_ads_defconfig
+++ b/arch/powerpc/configs/85xx/mpc8560_ads_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc5
-# Mon Jun  9 08:52:33 2008
+# Linux kernel version: 2.6.27-rc4
+# Thu Aug 21 00:52:32 2008
 #
 # CONFIG_PPC64 is not set
 
@@ -15,6 +15,7 @@ CONFIG_PPC_85xx=y
 # CONFIG_44x is not set
 # CONFIG_E200 is not set
 CONFIG_E500=y
+# CONFIG_PPC_E500MC is not set
 CONFIG_BOOKE=y
 CONFIG_FSL_BOOKE=y
 CONFIG_FSL_EMB_PERFMON=y
@@ -33,12 +34,14 @@ CONFIG_GENERIC_HARDIRQS=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_GENERIC_GPIO=y
 # CONFIG_ARCH_NO_VIRT_TO_BUS is not set
 CONFIG_PPC=y
 CONFIG_EARLY_PRINTK=y
@@ -89,7 +92,6 @@ CONFIG_INITRAMFS_SOURCE=""
 CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
@@ -114,10 +116,16 @@ CONFIG_SLUB=y
 # CONFIG_PROFILING is not set
 # CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
+CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
 # CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+CONFIG_HAVE_CLK=y
 CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
@@ -128,6 +136,7 @@ CONFIG_BLOCK=y
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -146,8 +155,6 @@ CONFIG_CLASSIC_RCU=y
 #
 # Platform support
 #
-# CONFIG_PPC_MPC512x is not set
-# CONFIG_PPC_MPC5121 is not set
 # CONFIG_PPC_CELL is not set
 # CONFIG_PPC_CELL_NATIVE is not set
 # CONFIG_PQ2ADS is not set
@@ -156,11 +163,13 @@ CONFIG_MPC85xx=y
 CONFIG_MPC8560_ADS=y
 # CONFIG_MPC85xx_CDS is not set
 # CONFIG_MPC85xx_MDS is not set
+# CONFIG_MPC8536_DS is not set
 # CONFIG_MPC85xx_DS is not set
 # CONFIG_KSI8560 is not set
 # CONFIG_STX_GP3 is not set
 # CONFIG_TQM8540 is not set
 # CONFIG_TQM8541 is not set
+# CONFIG_TQM8548 is not set
 # CONFIG_TQM8555 is not set
 # CONFIG_TQM8560 is not set
 # CONFIG_SBC8548 is not set
@@ -177,7 +186,6 @@ CONFIG_MPIC=y
 # CONFIG_GENERIC_IOMAP is not set
 # CONFIG_CPU_FREQ is not set
 CONFIG_CPM2=y
-CONFIG_PPC_CPM_NEW_BINDING=y
 # CONFIG_FSL_ULI1575 is not set
 CONFIG_CPM=y
 
@@ -217,6 +225,7 @@ CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_MIGRATION=y
 # CONFIG_RESOURCES_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
@@ -224,6 +233,7 @@ CONFIG_VIRT_TO_BUS=y
 CONFIG_FORCE_MAX_ZONEORDER=11
 # CONFIG_PROC_DEVICETREE is not set
 # CONFIG_CMDLINE_BOOL is not set
+CONFIG_EXTRA_TARGETS=""
 # CONFIG_PM is not set
 # CONFIG_SECCOMP is not set
 CONFIG_ISA_DMA_API=y
@@ -235,6 +245,7 @@ CONFIG_ZONE_DMA=y
 CONFIG_PPC_INDIRECT_PCI=y
 CONFIG_FSL_SOC=y
 CONFIG_FSL_PCI=y
+CONFIG_PPC_PCI_CHOICE=y
 CONFIG_PCI=y
 CONFIG_PCI_DOMAINS=y
 CONFIG_PCI_SYSCALL=y
@@ -261,10 +272,6 @@ CONFIG_KERNEL_START=0xc0000000
 CONFIG_PHYSICAL_START=0x00000000
 CONFIG_PHYSICAL_ALIGN=0x10000000
 CONFIG_TASK_SIZE=0xc0000000
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -363,6 +370,7 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_CONNECTOR is not set
 # CONFIG_MTD is not set
 CONFIG_OF_DEVICE=y
+CONFIG_OF_GPIO=y
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_FD is not set
@@ -381,12 +389,14 @@ CONFIG_BLK_DEV_RAM_SIZE=32768
 # CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_PHANTOM is not set
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_HP_ILO is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -404,12 +414,15 @@ CONFIG_HAVE_IDE=y
 #
 # IEEE 1394 (FireWire) support
 #
+
+#
+# Enable only one of the two stacks, unless you know what you are doing
+#
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -456,10 +469,8 @@ CONFIG_NETDEV_1000=y
 # CONFIG_ACENIC is not set
 # CONFIG_DL2K is not set
 CONFIG_E1000=y
-CONFIG_E1000_NAPI=y
 # CONFIG_E1000_DISABLE_PACKET_SPLIT is not set
 # CONFIG_E1000E is not set
-# CONFIG_E1000E_ENABLED is not set
 # CONFIG_IP1000 is not set
 # CONFIG_IGB is not set
 # CONFIG_NS83820 is not set
@@ -473,9 +484,9 @@ CONFIG_E1000_NAPI=y
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
 CONFIG_GIANFAR=y
-CONFIG_GFAR_NAPI=y
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
+# CONFIG_ATL1E is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
 # CONFIG_CHELSIO_T3 is not set
@@ -582,6 +593,24 @@ CONFIG_GEN_RTC=y
 CONFIG_DEVPORT=y
 # CONFIG_I2C is not set
 # CONFIG_SPI is not set
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+# CONFIG_GPIO_SYSFS is not set
+
+#
+# I2C GPIO expanders:
+#
+
+#
+# PCI GPIO expanders:
+#
+# CONFIG_GPIO_BT8XX is not set
+
+#
+# SPI GPIO expanders:
+#
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 CONFIG_HWMON=y
@@ -602,6 +631,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_W83627EHF is not set
 # CONFIG_HWMON_DEBUG_CHIP is not set
 # CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
 
 #
@@ -613,8 +643,10 @@ CONFIG_SSB_POSSIBLE=y
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
 
 #
 # Multimedia devices
@@ -646,10 +678,6 @@ CONFIG_VIDEO_OUTPUT_CONTROL=y
 # Display device support
 #
 # CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Sound
-#
 # CONFIG_SOUND is not set
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
@@ -664,6 +692,10 @@ CONFIG_USB_ARCH_HAS_EHCI=y
 # CONFIG_USB_OTG_BLACKLIST_HUB is not set
 
 #
+# Enable Host or Gadget support to see Inventra options
+#
+
+#
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
 #
 # CONFIG_USB_GADGET is not set
@@ -741,6 +773,7 @@ CONFIG_TMPFS=y
 # CONFIG_CRAMFS is not set
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
 # CONFIG_ROMFS_FS is not set
@@ -750,12 +783,11 @@ CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 # CONFIG_NFS_V3 is not set
 # CONFIG_NFS_V4 is not set
-# CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
 CONFIG_LOCKD=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -791,6 +823,7 @@ CONFIG_BITREVERSE=y
 # CONFIG_GENERIC_FIND_FIRST_BIT is not set
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
 # CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
@@ -815,6 +848,8 @@ CONFIG_FRAME_WARN=1024
 CONFIG_DEBUG_KERNEL=y
 # CONFIG_DEBUG_SHIRQ is not set
 CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
 CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
@@ -832,17 +867,29 @@ CONFIG_DEBUG_MUTEXES=y
 # CONFIG_DEBUG_INFO is not set
 # CONFIG_DEBUG_VM is not set
 # CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+# CONFIG_FTRACE is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
 # CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
 # CONFIG_DEBUG_PAGEALLOC is not set
-# CONFIG_DEBUGGER is not set
-# CONFIG_KGDB_CONSOLE is not set
+# CONFIG_CODE_PATCHING_SELFTEST is not set
+# CONFIG_FTR_FIXUP_SELFTEST is not set
+# CONFIG_XMON is not set
 # CONFIG_IRQSTACKS is not set
 # CONFIG_BDI_SWITCH is not set
 # CONFIG_PPC_EARLY_DEBUG is not set
@@ -895,6 +942,10 @@ CONFIG_CRYPTO=y
 # CONFIG_CRYPTO_MD4 is not set
 # CONFIG_CRYPTO_MD5 is not set
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
 # CONFIG_CRYPTO_SHA1 is not set
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
@@ -927,6 +978,7 @@ CONFIG_CRYPTO=y
 # CONFIG_CRYPTO_LZO is not set
 CONFIG_CRYPTO_HW=y
 # CONFIG_CRYPTO_DEV_HIFN_795X is not set
-# CONFIG_PPC_CLOCK is not set
+# CONFIG_CRYPTO_DEV_TALITOS is not set
+CONFIG_PPC_CLOCK=y
 CONFIG_PPC_LIB_RHEAP=y
 # CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/85xx/mpc8568mds_defconfig b/arch/powerpc/configs/85xx/mpc8568mds_defconfig
index 28004e93aeee..dc27c74955fa 100644
--- a/arch/powerpc/configs/85xx/mpc8568mds_defconfig
+++ b/arch/powerpc/configs/85xx/mpc8568mds_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc5
-# Mon Jun  9 08:52:34 2008
+# Linux kernel version: 2.6.27-rc4
+# Thu Aug 21 00:52:33 2008
 #
 # CONFIG_PPC64 is not set
 
@@ -15,6 +15,7 @@ CONFIG_PPC_85xx=y
 # CONFIG_44x is not set
 # CONFIG_E200 is not set
 CONFIG_E500=y
+# CONFIG_PPC_E500MC is not set
 CONFIG_BOOKE=y
 CONFIG_FSL_BOOKE=y
 CONFIG_FSL_EMB_PERFMON=y
@@ -33,6 +34,7 @@ CONFIG_GENERIC_HARDIRQS=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
@@ -89,7 +91,6 @@ CONFIG_INITRAMFS_SOURCE=""
 CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
 # CONFIG_KALLSYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
@@ -112,10 +113,16 @@ CONFIG_SLUB=y
 # CONFIG_PROFILING is not set
 # CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
+CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
 # CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+# CONFIG_HAVE_CLK is not set
 CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
@@ -126,12 +133,13 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-# CONFIG_KMOD is not set
+CONFIG_KMOD=y
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -150,8 +158,6 @@ CONFIG_CLASSIC_RCU=y
 #
 # Platform support
 #
-# CONFIG_PPC_MPC512x is not set
-# CONFIG_PPC_MPC5121 is not set
 # CONFIG_PPC_CELL is not set
 # CONFIG_PPC_CELL_NATIVE is not set
 # CONFIG_PQ2ADS is not set
@@ -160,11 +166,13 @@ CONFIG_MPC85xx=y
 # CONFIG_MPC8560_ADS is not set
 # CONFIG_MPC85xx_CDS is not set
 CONFIG_MPC85xx_MDS=y
+# CONFIG_MPC8536_DS is not set
 # CONFIG_MPC85xx_DS is not set
 # CONFIG_KSI8560 is not set
 # CONFIG_STX_GP3 is not set
 # CONFIG_TQM8540 is not set
 # CONFIG_TQM8541 is not set
+# CONFIG_TQM8548 is not set
 # CONFIG_TQM8555 is not set
 # CONFIG_TQM8560 is not set
 # CONFIG_SBC8548 is not set
@@ -197,7 +205,7 @@ CONFIG_HZ_250=y
 # CONFIG_HZ_300 is not set
 # CONFIG_HZ_1000 is not set
 CONFIG_HZ=250
-# CONFIG_SCHED_HRTICK is not set
+CONFIG_SCHED_HRTICK=y
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
@@ -220,6 +228,7 @@ CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_MIGRATION=y
 # CONFIG_RESOURCES_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
@@ -227,6 +236,7 @@ CONFIG_VIRT_TO_BUS=y
 CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
+CONFIG_EXTRA_TARGETS=""
 # CONFIG_PM is not set
 CONFIG_SECCOMP=y
 CONFIG_ISA_DMA_API=y
@@ -238,6 +248,7 @@ CONFIG_ZONE_DMA=y
 CONFIG_PPC_INDIRECT_PCI=y
 CONFIG_FSL_SOC=y
 CONFIG_FSL_PCI=y
+CONFIG_PPC_PCI_CHOICE=y
 CONFIG_PCI=y
 CONFIG_PCI_DOMAINS=y
 CONFIG_PCI_SYSCALL=y
@@ -264,10 +275,6 @@ CONFIG_KERNEL_START=0xc0000000
 CONFIG_PHYSICAL_START=0x00000000
 CONFIG_PHYSICAL_ALIGN=0x10000000
 CONFIG_TASK_SIZE=0xc0000000
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -385,12 +392,14 @@ CONFIG_BLK_DEV_RAM_SIZE=32768
 # CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_PHANTOM is not set
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_HP_ILO is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -468,6 +477,7 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_NSP32 is not set
 # CONFIG_SCSI_DEBUG is not set
 # CONFIG_SCSI_SRP is not set
+# CONFIG_SCSI_DH is not set
 # CONFIG_ATA is not set
 # CONFIG_MD is not set
 # CONFIG_FUSION is not set
@@ -475,12 +485,15 @@ CONFIG_SCSI_LOWLEVEL=y
 #
 # IEEE 1394 (FireWire) support
 #
+
+#
+# Enable only one of the two stacks, unless you know what you are doing
+#
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -524,7 +537,6 @@ CONFIG_NETDEV_1000=y
 # CONFIG_DL2K is not set
 # CONFIG_E1000 is not set
 # CONFIG_E1000E is not set
-# CONFIG_E1000E_ENABLED is not set
 # CONFIG_IP1000 is not set
 # CONFIG_IGB is not set
 # CONFIG_NS83820 is not set
@@ -538,10 +550,10 @@ CONFIG_NETDEV_1000=y
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
 CONFIG_GIANFAR=y
-CONFIG_GFAR_NAPI=y
 # CONFIG_UCC_GETH is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
+# CONFIG_ATL1E is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
 # CONFIG_CHELSIO_T3 is not set
@@ -648,42 +660,63 @@ CONFIG_DEVPORT=y
 CONFIG_I2C=y
 CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
 
 #
 # I2C Hardware Bus support
 #
+
+#
+# PC SMBus host controller drivers
+#
 # CONFIG_I2C_ALI1535 is not set
 # CONFIG_I2C_ALI1563 is not set
 # CONFIG_I2C_ALI15X3 is not set
 # CONFIG_I2C_AMD756 is not set
 # CONFIG_I2C_AMD8111 is not set
 # CONFIG_I2C_I801 is not set
-# CONFIG_I2C_I810 is not set
+# CONFIG_I2C_ISCH is not set
 # CONFIG_I2C_PIIX4 is not set
-CONFIG_I2C_MPC=y
 # CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_PROSAVAGE is not set
-# CONFIG_I2C_SAVAGE4 is not set
-# CONFIG_I2C_SIMTEC is not set
 # CONFIG_I2C_SIS5595 is not set
 # CONFIG_I2C_SIS630 is not set
 # CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_STUB is not set
 # CONFIG_I2C_VIA is not set
 # CONFIG_I2C_VIAPRO is not set
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+CONFIG_I2C_MPC=y
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+
+#
+# Graphics adapter I2C/DDC channel drivers
+#
 # CONFIG_I2C_VOODOO3 is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
 # CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
 
 #
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
+# CONFIG_AT24 is not set
 # CONFIG_SENSORS_EEPROM is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
@@ -692,10 +725,13 @@ CONFIG_I2C_MPC=y
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
 # CONFIG_SPI is not set
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+# CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 CONFIG_HWMON=y
 # CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_AD7414 is not set
 # CONFIG_SENSORS_AD7418 is not set
 # CONFIG_SENSORS_ADM1021 is not set
 # CONFIG_SENSORS_ADM1025 is not set
@@ -749,6 +785,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_W83627EHF is not set
 # CONFIG_HWMON_DEBUG_CHIP is not set
 # CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
 CONFIG_WATCHDOG=y
 # CONFIG_WATCHDOG_NOWAYOUT is not set
 
@@ -756,6 +793,7 @@ CONFIG_WATCHDOG=y
 # Watchdog Device Drivers
 #
 # CONFIG_SOFT_WATCHDOG is not set
+# CONFIG_ALIM7101_WDT is not set
 # CONFIG_BOOKE_WDT is not set
 
 #
@@ -773,8 +811,10 @@ CONFIG_SSB_POSSIBLE=y
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
 
 #
 # Multimedia devices
@@ -806,10 +846,6 @@ CONFIG_VIDEO_OUTPUT_CONTROL=m
 # Display device support
 #
 # CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Sound
-#
 # CONFIG_SOUND is not set
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
@@ -824,6 +860,10 @@ CONFIG_USB_ARCH_HAS_EHCI=y
 # CONFIG_USB_OTG_BLACKLIST_HUB is not set
 
 #
+# Enable Host or Gadget support to see Inventra options
+#
+
+#
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
 #
 # CONFIG_USB_GADGET is not set
@@ -862,6 +902,7 @@ CONFIG_RTC_DRV_DS1374=y
 # CONFIG_RTC_DRV_PCF8583 is not set
 # CONFIG_RTC_DRV_M41T80 is not set
 # CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
 
 #
 # SPI RTC drivers
@@ -950,6 +991,7 @@ CONFIG_TMPFS=y
 # CONFIG_CRAMFS is not set
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
 # CONFIG_ROMFS_FS is not set
@@ -960,14 +1002,13 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
-# CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_BIND34 is not set
 CONFIG_RPCSEC_GSS_KRB5=y
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -995,6 +1036,7 @@ CONFIG_PARTITION_ADVANCED=y
 # CONFIG_SYSV68_PARTITION is not set
 # CONFIG_NLS is not set
 # CONFIG_DLM is not set
+# CONFIG_QE_GPIO is not set
 
 #
 # Library routines
@@ -1003,6 +1045,7 @@ CONFIG_BITREVERSE=y
 # CONFIG_GENERIC_FIND_FIRST_BIT is not set
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
 # CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
@@ -1027,6 +1070,8 @@ CONFIG_FRAME_WARN=1024
 CONFIG_DEBUG_KERNEL=y
 # CONFIG_DEBUG_SHIRQ is not set
 CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
 CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
@@ -1044,17 +1089,28 @@ CONFIG_SCHED_DEBUG=y
 # CONFIG_DEBUG_INFO is not set
 # CONFIG_DEBUG_VM is not set
 # CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+# CONFIG_FTRACE is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
 # CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
 # CONFIG_DEBUG_PAGEALLOC is not set
-CONFIG_DEBUGGER=y
+# CONFIG_CODE_PATCHING_SELFTEST is not set
+# CONFIG_FTR_FIXUP_SELFTEST is not set
 # CONFIG_XMON is not set
 # CONFIG_IRQSTACKS is not set
 # CONFIG_BDI_SWITCH is not set
@@ -1122,6 +1178,10 @@ CONFIG_CRYPTO_PCBC=m
 # CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=y
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
 # CONFIG_CRYPTO_SHA1 is not set
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
@@ -1154,6 +1214,7 @@ CONFIG_CRYPTO_DES=y
 # CONFIG_CRYPTO_LZO is not set
 CONFIG_CRYPTO_HW=y
 # CONFIG_CRYPTO_DEV_HIFN_795X is not set
+# CONFIG_CRYPTO_DEV_TALITOS is not set
 # CONFIG_PPC_CLOCK is not set
 CONFIG_PPC_LIB_RHEAP=y
 # CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/85xx/mpc8572_ds_defconfig b/arch/powerpc/configs/85xx/mpc8572_ds_defconfig
index 164fd9606ee6..eda45bb8a13f 100644
--- a/arch/powerpc/configs/85xx/mpc8572_ds_defconfig
+++ b/arch/powerpc/configs/85xx/mpc8572_ds_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc5
-# Mon Jun  9 08:52:35 2008
+# Linux kernel version: 2.6.27-rc4
+# Thu Aug 21 07:21:42 2008
 #
 # CONFIG_PPC64 is not set
 
@@ -15,6 +15,7 @@ CONFIG_PPC_85xx=y
 # CONFIG_44x is not set
 # CONFIG_E200 is not set
 CONFIG_E500=y
+# CONFIG_PPC_E500MC is not set
 CONFIG_BOOKE=y
 CONFIG_FSL_BOOKE=y
 CONFIG_FSL_EMB_PERFMON=y
@@ -33,6 +34,7 @@ CONFIG_GENERIC_HARDIRQS=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
@@ -92,7 +94,6 @@ CONFIG_INITRAMFS_SOURCE=""
 CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
 CONFIG_KALLSYMS_EXTRA_PASS=y
@@ -118,10 +119,16 @@ CONFIG_SLUB=y
 # CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
+CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
 # CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+# CONFIG_HAVE_CLK is not set
 CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
@@ -138,6 +145,7 @@ CONFIG_LBD=y
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -156,8 +164,6 @@ CONFIG_CLASSIC_RCU=y
 #
 # Platform support
 #
-# CONFIG_PPC_MPC512x is not set
-# CONFIG_PPC_MPC5121 is not set
 # CONFIG_PPC_CELL is not set
 # CONFIG_PPC_CELL_NATIVE is not set
 # CONFIG_PQ2ADS is not set
@@ -166,11 +172,13 @@ CONFIG_MPC85xx=y
 # CONFIG_MPC8560_ADS is not set
 # CONFIG_MPC85xx_CDS is not set
 # CONFIG_MPC85xx_MDS is not set
+# CONFIG_MPC8536_DS is not set
 CONFIG_MPC85xx_DS=y
 # CONFIG_KSI8560 is not set
 # CONFIG_STX_GP3 is not set
 # CONFIG_TQM8540 is not set
 # CONFIG_TQM8541 is not set
+# CONFIG_TQM8548 is not set
 # CONFIG_TQM8555 is not set
 # CONFIG_TQM8560 is not set
 # CONFIG_SBC8548 is not set
@@ -202,7 +210,7 @@ CONFIG_HZ_250=y
 # CONFIG_HZ_300 is not set
 # CONFIG_HZ_1000 is not set
 CONFIG_HZ=250
-# CONFIG_SCHED_HRTICK is not set
+CONFIG_SCHED_HRTICK=y
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
@@ -225,6 +233,7 @@ CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_MIGRATION=y
 # CONFIG_RESOURCES_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
@@ -232,6 +241,7 @@ CONFIG_VIRT_TO_BUS=y
 CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
+CONFIG_EXTRA_TARGETS=""
 # CONFIG_PM is not set
 CONFIG_SECCOMP=y
 CONFIG_ISA_DMA_API=y
@@ -244,6 +254,7 @@ CONFIG_GENERIC_ISA_DMA=y
 CONFIG_PPC_INDIRECT_PCI=y
 CONFIG_FSL_SOC=y
 CONFIG_FSL_PCI=y
+CONFIG_PPC_PCI_CHOICE=y
 CONFIG_PCI=y
 CONFIG_PCI_DOMAINS=y
 CONFIG_PCI_SYSCALL=y
@@ -270,10 +281,6 @@ CONFIG_KERNEL_START=0xc0000000
 CONFIG_PHYSICAL_START=0x00000000
 CONFIG_PHYSICAL_ALIGN=0x10000000
 CONFIG_TASK_SIZE=0xc0000000
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -399,6 +406,8 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_DEBUG_DRIVER is not set
 # CONFIG_DEBUG_DEVRES is not set
 # CONFIG_SYS_HYPERVISOR is not set
@@ -425,12 +434,14 @@ CONFIG_BLK_DEV_RAM_SIZE=131072
 # CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_PHANTOM is not set
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_HP_ILO is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -510,6 +521,7 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_NSP32 is not set
 # CONFIG_SCSI_DEBUG is not set
 # CONFIG_SCSI_SRP is not set
+# CONFIG_SCSI_DH is not set
 CONFIG_ATA=y
 # CONFIG_ATA_NONSTANDARD is not set
 CONFIG_SATA_PMP=y
@@ -577,12 +589,15 @@ CONFIG_PATA_ALI=y
 #
 # IEEE 1394 (FireWire) support
 #
+
+#
+# Enable only one of the two stacks, unless you know what you are doing
+#
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 CONFIG_DUMMY=y
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -626,7 +641,6 @@ CONFIG_NETDEV_1000=y
 # CONFIG_DL2K is not set
 # CONFIG_E1000 is not set
 # CONFIG_E1000E is not set
-# CONFIG_E1000E_ENABLED is not set
 # CONFIG_IP1000 is not set
 # CONFIG_IGB is not set
 # CONFIG_NS83820 is not set
@@ -640,9 +654,9 @@ CONFIG_NETDEV_1000=y
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
 CONFIG_GIANFAR=y
-CONFIG_GFAR_NAPI=y
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
+# CONFIG_ATL1E is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
 # CONFIG_CHELSIO_T3 is not set
@@ -719,12 +733,14 @@ CONFIG_SERIO_SERPORT=y
 # CONFIG_SERIO_PCIPS2 is not set
 CONFIG_SERIO_LIBPS2=y
 # CONFIG_SERIO_RAW is not set
+# CONFIG_SERIO_XILINX_XPS_PS2 is not set
 # CONFIG_GAMEPORT is not set
 
 #
 # Character devices
 #
 CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
 # CONFIG_VT_HW_CONSOLE_BINDING is not set
@@ -758,7 +774,7 @@ CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_IPMI_HANDLER is not set
-# CONFIG_HW_RANDOM is not set
+CONFIG_HW_RANDOM=y
 CONFIG_NVRAM=y
 # CONFIG_R3964 is not set
 # CONFIG_APPLICOM is not set
@@ -768,43 +784,64 @@ CONFIG_DEVPORT=y
 CONFIG_I2C=y
 CONFIG_I2C_BOARDINFO=y
 # CONFIG_I2C_CHARDEV is not set
+CONFIG_I2C_HELPER_AUTO=y
 
 #
 # I2C Hardware Bus support
 #
+
+#
+# PC SMBus host controller drivers
+#
 # CONFIG_I2C_ALI1535 is not set
 # CONFIG_I2C_ALI1563 is not set
 # CONFIG_I2C_ALI15X3 is not set
 # CONFIG_I2C_AMD756 is not set
 # CONFIG_I2C_AMD8111 is not set
 # CONFIG_I2C_I801 is not set
-# CONFIG_I2C_I810 is not set
+# CONFIG_I2C_ISCH is not set
 # CONFIG_I2C_PIIX4 is not set
-CONFIG_I2C_MPC=y
 # CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_PROSAVAGE is not set
-# CONFIG_I2C_SAVAGE4 is not set
-# CONFIG_I2C_SIMTEC is not set
 # CONFIG_I2C_SIS5595 is not set
 # CONFIG_I2C_SIS630 is not set
 # CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_TINY_USB is not set
 # CONFIG_I2C_VIA is not set
 # CONFIG_I2C_VIAPRO is not set
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+CONFIG_I2C_MPC=y
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Graphics adapter I2C/DDC channel drivers
+#
 # CONFIG_I2C_VOODOO3 is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
 # CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
 
 #
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
+# CONFIG_AT24 is not set
 CONFIG_SENSORS_EEPROM=y
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
@@ -813,10 +850,13 @@ CONFIG_SENSORS_EEPROM=y
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
 # CONFIG_SPI is not set
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+# CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 # CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
 
 #
@@ -828,8 +868,10 @@ CONFIG_SSB_POSSIBLE=y
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
 
 #
 # Multimedia devices
@@ -871,6 +913,7 @@ CONFIG_DVB_CAPTURE_DRIVERS=y
 # CONFIG_DVB_TTUSB_BUDGET is not set
 # CONFIG_DVB_TTUSB_DEC is not set
 # CONFIG_DVB_CINERGYT2 is not set
+# CONFIG_DVB_SIANO_SMS1XXX is not set
 
 #
 # Supported FlexCopII (B2C2) Adapters
@@ -917,6 +960,7 @@ CONFIG_DVB_CAPTURE_DRIVERS=y
 # CONFIG_DVB_SP887X is not set
 # CONFIG_DVB_CX22700 is not set
 # CONFIG_DVB_CX22702 is not set
+# CONFIG_DVB_DRX397XD is not set
 # CONFIG_DVB_L64781 is not set
 # CONFIG_DVB_TDA1004X is not set
 # CONFIG_DVB_NXT6000 is not set
@@ -984,15 +1028,7 @@ CONFIG_VIDEO_OUTPUT_CONTROL=y
 CONFIG_VGA_CONSOLE=y
 # CONFIG_VGACON_SOFT_SCROLLBACK is not set
 CONFIG_DUMMY_CONSOLE=y
-
-#
-# Sound
-#
 CONFIG_SOUND=y
-
-#
-# Advanced Linux Sound Architecture
-#
 CONFIG_SND=y
 CONFIG_SND_TIMER=y
 CONFIG_SND_PCM=y
@@ -1006,19 +1042,15 @@ CONFIG_SND_PCM_OSS_PLUGINS=y
 CONFIG_SND_VERBOSE_PROCFS=y
 # CONFIG_SND_VERBOSE_PRINTK is not set
 # CONFIG_SND_DEBUG is not set
-
-#
-# Generic devices
-#
+CONFIG_SND_VMASTER=y
 CONFIG_SND_AC97_CODEC=y
+CONFIG_SND_DRIVERS=y
 # CONFIG_SND_DUMMY is not set
 # CONFIG_SND_MTPAV is not set
 # CONFIG_SND_SERIAL_U16550 is not set
 # CONFIG_SND_MPU401 is not set
-
-#
-# PCI devices
-#
+# CONFIG_SND_AC97_POWER_SAVE is not set
+CONFIG_SND_PCI=y
 # CONFIG_SND_AD1889 is not set
 # CONFIG_SND_ALS300 is not set
 # CONFIG_SND_ALS4000 is not set
@@ -1080,39 +1112,12 @@ CONFIG_SND_INTEL8X0=y
 # CONFIG_SND_VIRTUOSO is not set
 # CONFIG_SND_VX222 is not set
 # CONFIG_SND_YMFPCI is not set
-# CONFIG_SND_AC97_POWER_SAVE is not set
-
-#
-# ALSA PowerMac devices
-#
-
-#
-# ALSA PowerPC devices
-#
-
-#
-# USB devices
-#
+CONFIG_SND_PPC=y
+CONFIG_SND_USB=y
 # CONFIG_SND_USB_AUDIO is not set
 # CONFIG_SND_USB_USX2Y is not set
 # CONFIG_SND_USB_CAIAQ is not set
-
-#
-# System on Chip audio support
-#
 # CONFIG_SND_SOC is not set
-
-#
-# ALSA SoC audio for Freescale SOCs
-#
-
-#
-# SoC Audio for the Texas Instruments OMAP
-#
-
-#
-# Open Sound System
-#
 # CONFIG_SOUND_PRIME is not set
 CONFIG_AC97_BUS=y
 CONFIG_HID_SUPPORT=y
@@ -1144,6 +1149,7 @@ CONFIG_USB_DEVICE_CLASS=y
 # CONFIG_USB_OTG is not set
 # CONFIG_USB_OTG_WHITELIST is not set
 # CONFIG_USB_OTG_BLACKLIST_HUB is not set
+CONFIG_USB_MON=y
 
 #
 # USB Host Controller Drivers
@@ -1195,6 +1201,7 @@ CONFIG_USB_STORAGE=y
 # CONFIG_USB_STORAGE_ALAUDA is not set
 # CONFIG_USB_STORAGE_ONETOUCH is not set
 # CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_SIERRA is not set
 # CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
 # CONFIG_USB_LIBUSUAL is not set
 
@@ -1203,7 +1210,6 @@ CONFIG_USB_STORAGE=y
 #
 # CONFIG_USB_MDC800 is not set
 # CONFIG_USB_MICROTEK is not set
-CONFIG_USB_MON=y
 
 #
 # USB port drivers
@@ -1216,7 +1222,6 @@ CONFIG_USB_MON=y
 # CONFIG_USB_EMI62 is not set
 # CONFIG_USB_EMI26 is not set
 # CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_AUERSWALD is not set
 # CONFIG_USB_RIO500 is not set
 # CONFIG_USB_LEGOTOWER is not set
 # CONFIG_USB_LCD is not set
@@ -1270,6 +1275,7 @@ CONFIG_RTC_INTF_DEV=y
 # CONFIG_RTC_DRV_PCF8583 is not set
 # CONFIG_RTC_DRV_M41T80 is not set
 # CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
 
 #
 # SPI RTC drivers
@@ -1368,6 +1374,7 @@ CONFIG_EFS_FS=m
 CONFIG_CRAMFS=y
 CONFIG_VXFS_FS=m
 # CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 CONFIG_HPFS_FS=m
 CONFIG_QNX4FS_FS=m
 # CONFIG_ROMFS_FS is not set
@@ -1380,17 +1387,16 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
+CONFIG_ROOT_NFS=y
 CONFIG_NFSD=y
 # CONFIG_NFSD_V3 is not set
 # CONFIG_NFSD_V4 is not set
-CONFIG_ROOT_NFS=y
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_EXPORTFS=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_BIND34 is not set
 CONFIG_RPCSEC_GSS_KRB5=y
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -1469,6 +1475,7 @@ CONFIG_BITREVERSE=y
 # CONFIG_GENERIC_FIND_FIRST_BIT is not set
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
+CONFIG_CRC_T10DIF=y
 CONFIG_CRC_ITU_T=m
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
@@ -1494,6 +1501,8 @@ CONFIG_FRAME_WARN=1024
 CONFIG_DEBUG_KERNEL=y
 # CONFIG_DEBUG_SHIRQ is not set
 CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
 CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
@@ -1512,17 +1521,29 @@ CONFIG_SCHED_DEBUG=y
 CONFIG_DEBUG_INFO=y
 # CONFIG_DEBUG_VM is not set
 # CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+# CONFIG_FTRACE is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
 # CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
 # CONFIG_DEBUG_PAGEALLOC is not set
-# CONFIG_DEBUGGER is not set
+# CONFIG_CODE_PATCHING_SELFTEST is not set
+# CONFIG_FTR_FIXUP_SELFTEST is not set
+# CONFIG_XMON is not set
 # CONFIG_IRQSTACKS is not set
 # CONFIG_BDI_SWITCH is not set
 # CONFIG_PPC_EARLY_DEBUG is not set
@@ -1539,13 +1560,14 @@ CONFIG_CRYPTO=y
 # Crypto core or helper
 #
 CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_AEAD=y
 CONFIG_CRYPTO_BLKCIPHER=y
 CONFIG_CRYPTO_HASH=y
 CONFIG_CRYPTO_MANAGER=y
 # CONFIG_CRYPTO_GF128MUL is not set
 # CONFIG_CRYPTO_NULL is not set
 # CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
+CONFIG_CRYPTO_AUTHENC=y
 # CONFIG_CRYPTO_TEST is not set
 
 #
@@ -1579,6 +1601,10 @@ CONFIG_CRYPTO_HMAC=y
 # CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=y
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
 CONFIG_CRYPTO_SHA1=m
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
@@ -1611,5 +1637,6 @@ CONFIG_CRYPTO_DES=y
 # CONFIG_CRYPTO_LZO is not set
 CONFIG_CRYPTO_HW=y
 # CONFIG_CRYPTO_DEV_HIFN_795X is not set
+CONFIG_CRYPTO_DEV_TALITOS=y
 # CONFIG_PPC_CLOCK is not set
 # CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/85xx/mpc85xx_cds_defconfig b/arch/powerpc/configs/85xx/mpc85xx_cds_defconfig
index b09f0032a10b..97f3c4fe440b 100644
--- a/arch/powerpc/configs/85xx/mpc85xx_cds_defconfig
+++ b/arch/powerpc/configs/85xx/mpc85xx_cds_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc5
-# Mon Jun  9 08:52:36 2008
+# Linux kernel version: 2.6.27-rc4
+# Thu Aug 21 00:52:34 2008
 #
 # CONFIG_PPC64 is not set
 
@@ -15,6 +15,7 @@ CONFIG_PPC_85xx=y
 # CONFIG_44x is not set
 # CONFIG_E200 is not set
 CONFIG_E500=y
+# CONFIG_PPC_E500MC is not set
 CONFIG_BOOKE=y
 CONFIG_FSL_BOOKE=y
 CONFIG_FSL_EMB_PERFMON=y
@@ -33,6 +34,7 @@ CONFIG_GENERIC_HARDIRQS=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
@@ -89,7 +91,6 @@ CONFIG_INITRAMFS_SOURCE=""
 CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
@@ -114,10 +115,16 @@ CONFIG_SLUB=y
 # CONFIG_PROFILING is not set
 # CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
+CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
 # CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+# CONFIG_HAVE_CLK is not set
 CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
@@ -128,6 +135,7 @@ CONFIG_BLOCK=y
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -146,8 +154,6 @@ CONFIG_CLASSIC_RCU=y
 #
 # Platform support
 #
-# CONFIG_PPC_MPC512x is not set
-# CONFIG_PPC_MPC5121 is not set
 # CONFIG_PPC_CELL is not set
 # CONFIG_PPC_CELL_NATIVE is not set
 # CONFIG_PQ2ADS is not set
@@ -156,11 +162,13 @@ CONFIG_MPC85xx=y
 # CONFIG_MPC8560_ADS is not set
 CONFIG_MPC85xx_CDS=y
 # CONFIG_MPC85xx_MDS is not set
+# CONFIG_MPC8536_DS is not set
 # CONFIG_MPC85xx_DS is not set
 # CONFIG_KSI8560 is not set
 # CONFIG_STX_GP3 is not set
 # CONFIG_TQM8540 is not set
 # CONFIG_TQM8541 is not set
+# CONFIG_TQM8548 is not set
 # CONFIG_TQM8555 is not set
 # CONFIG_TQM8560 is not set
 # CONFIG_SBC8548 is not set
@@ -192,7 +200,7 @@ CONFIG_HZ_250=y
 # CONFIG_HZ_300 is not set
 # CONFIG_HZ_1000 is not set
 CONFIG_HZ=250
-# CONFIG_SCHED_HRTICK is not set
+CONFIG_SCHED_HRTICK=y
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
@@ -215,6 +223,7 @@ CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_MIGRATION=y
 # CONFIG_RESOURCES_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
@@ -222,6 +231,7 @@ CONFIG_VIRT_TO_BUS=y
 CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
+CONFIG_EXTRA_TARGETS=""
 # CONFIG_PM is not set
 # CONFIG_SECCOMP is not set
 CONFIG_ISA_DMA_API=y
@@ -233,6 +243,7 @@ CONFIG_ZONE_DMA=y
 CONFIG_PPC_INDIRECT_PCI=y
 CONFIG_FSL_SOC=y
 CONFIG_FSL_PCI=y
+CONFIG_PPC_PCI_CHOICE=y
 CONFIG_PCI=y
 CONFIG_PCI_DOMAINS=y
 CONFIG_PCI_SYSCALL=y
@@ -259,10 +270,6 @@ CONFIG_KERNEL_START=0xc0000000
 CONFIG_PHYSICAL_START=0x00000000
 CONFIG_PHYSICAL_ALIGN=0x10000000
 CONFIG_TASK_SIZE=0xc0000000
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -379,20 +386,22 @@ CONFIG_BLK_DEV_RAM_SIZE=32768
 # CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_PHANTOM is not set
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_HP_ILO is not set
 CONFIG_HAVE_IDE=y
 CONFIG_IDE=y
-CONFIG_IDE_MAX_HWIFS=4
 CONFIG_BLK_DEV_IDE=y
 
 #
 # Please see Documentation/ide/ide.txt for help/info on IDE drives
 #
+CONFIG_IDE_TIMINGS=y
 # CONFIG_BLK_DEV_IDE_SATA is not set
 # CONFIG_BLK_DEV_IDEDISK is not set
 # CONFIG_IDEDISK_MULTI_MODE is not set
@@ -405,7 +414,6 @@ CONFIG_IDE_PROC_FS=y
 #
 # IDE chipset support/bugfixes
 #
-CONFIG_IDE_GENERIC=y
 # CONFIG_BLK_DEV_PLATFORM is not set
 CONFIG_BLK_DEV_IDEDMA_SFF=y
 
@@ -423,10 +431,8 @@ CONFIG_BLK_DEV_IDEDMA_PCI=y
 # CONFIG_BLK_DEV_AMD74XX is not set
 # CONFIG_BLK_DEV_CMD64X is not set
 # CONFIG_BLK_DEV_TRIFLEX is not set
-# CONFIG_BLK_DEV_CY82C693 is not set
 # CONFIG_BLK_DEV_CS5520 is not set
 # CONFIG_BLK_DEV_CS5530 is not set
-# CONFIG_BLK_DEV_HPT34X is not set
 # CONFIG_BLK_DEV_HPT366 is not set
 # CONFIG_BLK_DEV_JMICRON is not set
 # CONFIG_BLK_DEV_SC1200 is not set
@@ -444,8 +450,6 @@ CONFIG_BLK_DEV_IDEDMA_PCI=y
 CONFIG_BLK_DEV_VIA82CXXX=y
 # CONFIG_BLK_DEV_TC86C001 is not set
 CONFIG_BLK_DEV_IDEDMA=y
-# CONFIG_BLK_DEV_HD_ONLY is not set
-# CONFIG_BLK_DEV_HD is not set
 
 #
 # SCSI device support
@@ -461,12 +465,15 @@ CONFIG_BLK_DEV_IDEDMA=y
 #
 # IEEE 1394 (FireWire) support
 #
+
+#
+# Enable only one of the two stacks, unless you know what you are doing
+#
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -509,10 +516,8 @@ CONFIG_NETDEV_1000=y
 # CONFIG_ACENIC is not set
 # CONFIG_DL2K is not set
 CONFIG_E1000=y
-CONFIG_E1000_NAPI=y
 # CONFIG_E1000_DISABLE_PACKET_SPLIT is not set
 # CONFIG_E1000E is not set
-# CONFIG_E1000E_ENABLED is not set
 # CONFIG_IP1000 is not set
 # CONFIG_IGB is not set
 # CONFIG_NS83820 is not set
@@ -526,9 +531,9 @@ CONFIG_E1000_NAPI=y
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
 CONFIG_GIANFAR=y
-CONFIG_GFAR_NAPI=y
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
+# CONFIG_ATL1E is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
 # CONFIG_CHELSIO_T3 is not set
@@ -634,6 +639,8 @@ CONFIG_GEN_RTC=y
 CONFIG_DEVPORT=y
 # CONFIG_I2C is not set
 # CONFIG_SPI is not set
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+# CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 CONFIG_HWMON=y
@@ -654,6 +661,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_W83627EHF is not set
 # CONFIG_HWMON_DEBUG_CHIP is not set
 # CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
 
 #
@@ -665,8 +673,10 @@ CONFIG_SSB_POSSIBLE=y
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
 
 #
 # Multimedia devices
@@ -698,10 +708,6 @@ CONFIG_VIDEO_OUTPUT_CONTROL=y
 # Display device support
 #
 # CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Sound
-#
 # CONFIG_SOUND is not set
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
@@ -716,6 +722,10 @@ CONFIG_USB_ARCH_HAS_EHCI=y
 # CONFIG_USB_OTG_BLACKLIST_HUB is not set
 
 #
+# Enable Host or Gadget support to see Inventra options
+#
+
+#
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
 #
 # CONFIG_USB_GADGET is not set
@@ -793,6 +803,7 @@ CONFIG_TMPFS=y
 # CONFIG_CRAMFS is not set
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
 # CONFIG_ROMFS_FS is not set
@@ -802,12 +813,11 @@ CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 # CONFIG_NFS_V3 is not set
 # CONFIG_NFS_V4 is not set
-# CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
 CONFIG_LOCKD=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -843,6 +853,7 @@ CONFIG_BITREVERSE=y
 # CONFIG_GENERIC_FIND_FIRST_BIT is not set
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
 # CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
@@ -867,6 +878,8 @@ CONFIG_FRAME_WARN=1024
 CONFIG_DEBUG_KERNEL=y
 # CONFIG_DEBUG_SHIRQ is not set
 CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
 CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
@@ -884,16 +897,29 @@ CONFIG_DEBUG_MUTEXES=y
 # CONFIG_DEBUG_INFO is not set
 # CONFIG_DEBUG_VM is not set
 # CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+# CONFIG_FTRACE is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
 # CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
 # CONFIG_DEBUG_PAGEALLOC is not set
-# CONFIG_DEBUGGER is not set
+# CONFIG_CODE_PATCHING_SELFTEST is not set
+# CONFIG_FTR_FIXUP_SELFTEST is not set
+# CONFIG_XMON is not set
 # CONFIG_IRQSTACKS is not set
 # CONFIG_BDI_SWITCH is not set
 # CONFIG_PPC_EARLY_DEBUG is not set
@@ -946,6 +972,10 @@ CONFIG_CRYPTO=y
 # CONFIG_CRYPTO_MD4 is not set
 # CONFIG_CRYPTO_MD5 is not set
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
 # CONFIG_CRYPTO_SHA1 is not set
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
@@ -978,5 +1008,6 @@ CONFIG_CRYPTO=y
 # CONFIG_CRYPTO_LZO is not set
 CONFIG_CRYPTO_HW=y
 # CONFIG_CRYPTO_DEV_HIFN_795X is not set
+# CONFIG_CRYPTO_DEV_TALITOS is not set
 # CONFIG_PPC_CLOCK is not set
 # CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/85xx/sbc8548_defconfig b/arch/powerpc/configs/85xx/sbc8548_defconfig
index 24f7f44b4821..41cedc4b63f6 100644
--- a/arch/powerpc/configs/85xx/sbc8548_defconfig
+++ b/arch/powerpc/configs/85xx/sbc8548_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc5
-# Mon Jun  9 08:52:37 2008
+# Linux kernel version: 2.6.27-rc4
+# Thu Aug 21 00:52:35 2008
 #
 # CONFIG_PPC64 is not set
 
@@ -15,6 +15,7 @@ CONFIG_PPC_85xx=y
 # CONFIG_44x is not set
 # CONFIG_E200 is not set
 CONFIG_E500=y
+# CONFIG_PPC_E500MC is not set
 CONFIG_BOOKE=y
 CONFIG_FSL_BOOKE=y
 CONFIG_FSL_EMB_PERFMON=y
@@ -33,6 +34,7 @@ CONFIG_GENERIC_HARDIRQS=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
@@ -89,7 +91,6 @@ CONFIG_INITRAMFS_SOURCE=""
 CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
 CONFIG_HOTPLUG=y
@@ -112,10 +113,16 @@ CONFIG_SLAB=y
 # CONFIG_PROFILING is not set
 # CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
+CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
 # CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+# CONFIG_HAVE_CLK is not set
 CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
@@ -126,6 +133,7 @@ CONFIG_BLOCK=y
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -144,8 +152,6 @@ CONFIG_CLASSIC_RCU=y
 #
 # Platform support
 #
-# CONFIG_PPC_MPC512x is not set
-# CONFIG_PPC_MPC5121 is not set
 # CONFIG_PPC_CELL is not set
 # CONFIG_PPC_CELL_NATIVE is not set
 # CONFIG_PQ2ADS is not set
@@ -154,11 +160,13 @@ CONFIG_MPC85xx=y
 # CONFIG_MPC8560_ADS is not set
 # CONFIG_MPC85xx_CDS is not set
 # CONFIG_MPC85xx_MDS is not set
+# CONFIG_MPC8536_DS is not set
 # CONFIG_MPC85xx_DS is not set
 # CONFIG_KSI8560 is not set
 # CONFIG_STX_GP3 is not set
 # CONFIG_TQM8540 is not set
 # CONFIG_TQM8541 is not set
+# CONFIG_TQM8548 is not set
 # CONFIG_TQM8555 is not set
 # CONFIG_TQM8560 is not set
 CONFIG_SBC8548=y
@@ -213,6 +221,7 @@ CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_MIGRATION=y
 # CONFIG_RESOURCES_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
@@ -220,6 +229,7 @@ CONFIG_VIRT_TO_BUS=y
 CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
+CONFIG_EXTRA_TARGETS=""
 # CONFIG_PM is not set
 # CONFIG_SECCOMP is not set
 CONFIG_ISA_DMA_API=y
@@ -231,6 +241,7 @@ CONFIG_ZONE_DMA=y
 CONFIG_PPC_INDIRECT_PCI=y
 CONFIG_FSL_SOC=y
 CONFIG_FSL_PCI=y
+CONFIG_PPC_PCI_CHOICE=y
 CONFIG_PCI=y
 CONFIG_PCI_DOMAINS=y
 CONFIG_PCI_SYSCALL=y
@@ -256,10 +267,6 @@ CONFIG_KERNEL_START=0xc0000000
 CONFIG_PHYSICAL_START=0x00000000
 CONFIG_PHYSICAL_ALIGN=0x10000000
 CONFIG_TASK_SIZE=0xc0000000
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -374,12 +381,14 @@ CONFIG_BLK_DEV_RAM_SIZE=4096
 # CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_PHANTOM is not set
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_HP_ILO is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -397,12 +406,15 @@ CONFIG_HAVE_IDE=y
 #
 # IEEE 1394 (FireWire) support
 #
+
+#
+# Enable only one of the two stacks, unless you know what you are doing
+#
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -446,7 +458,6 @@ CONFIG_NETDEV_1000=y
 # CONFIG_DL2K is not set
 # CONFIG_E1000 is not set
 # CONFIG_E1000E is not set
-# CONFIG_E1000E_ENABLED is not set
 # CONFIG_IP1000 is not set
 # CONFIG_IGB is not set
 # CONFIG_NS83820 is not set
@@ -460,9 +471,9 @@ CONFIG_NETDEV_1000=y
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
 CONFIG_GIANFAR=y
-CONFIG_GFAR_NAPI=y
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
+# CONFIG_ATL1E is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
 # CONFIG_CHELSIO_T3 is not set
@@ -568,6 +579,8 @@ CONFIG_GEN_RTC=y
 CONFIG_DEVPORT=y
 # CONFIG_I2C is not set
 # CONFIG_SPI is not set
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+# CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 CONFIG_HWMON=y
@@ -588,6 +601,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_W83627EHF is not set
 # CONFIG_HWMON_DEBUG_CHIP is not set
 # CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
 
 #
@@ -599,8 +613,10 @@ CONFIG_SSB_POSSIBLE=y
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
 
 #
 # Multimedia devices
@@ -632,10 +648,6 @@ CONFIG_VIDEO_OUTPUT_CONTROL=y
 # Display device support
 #
 # CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Sound
-#
 # CONFIG_SOUND is not set
 # CONFIG_HID_SUPPORT is not set
 # CONFIG_USB_SUPPORT is not set
@@ -706,6 +718,7 @@ CONFIG_TMPFS=y
 # CONFIG_CRAMFS is not set
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
 # CONFIG_ROMFS_FS is not set
@@ -715,12 +728,11 @@ CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 # CONFIG_NFS_V3 is not set
 # CONFIG_NFS_V4 is not set
-# CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
 CONFIG_LOCKD=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -744,6 +756,7 @@ CONFIG_BITREVERSE=y
 # CONFIG_GENERIC_FIND_FIRST_BIT is not set
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
 # CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
@@ -767,7 +780,16 @@ CONFIG_FRAME_WARN=1024
 # CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+# CONFIG_FTRACE is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
 # CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_IRQSTACKS is not set
 # CONFIG_PPC_EARLY_DEBUG is not set
 
@@ -819,6 +841,10 @@ CONFIG_CRYPTO=y
 # CONFIG_CRYPTO_MD4 is not set
 # CONFIG_CRYPTO_MD5 is not set
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
 # CONFIG_CRYPTO_SHA1 is not set
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
@@ -851,5 +877,6 @@ CONFIG_CRYPTO=y
 # CONFIG_CRYPTO_LZO is not set
 CONFIG_CRYPTO_HW=y
 # CONFIG_CRYPTO_DEV_HIFN_795X is not set
+# CONFIG_CRYPTO_DEV_TALITOS is not set
 # CONFIG_PPC_CLOCK is not set
 # CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/85xx/sbc8560_defconfig b/arch/powerpc/configs/85xx/sbc8560_defconfig
index 655518dcd73f..daef36f41b42 100644
--- a/arch/powerpc/configs/85xx/sbc8560_defconfig
+++ b/arch/powerpc/configs/85xx/sbc8560_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc5
-# Mon Jun  9 08:52:38 2008
+# Linux kernel version: 2.6.27-rc4
+# Thu Aug 21 00:52:36 2008
 #
 # CONFIG_PPC64 is not set
 
@@ -15,6 +15,7 @@ CONFIG_PPC_85xx=y
 # CONFIG_44x is not set
 # CONFIG_E200 is not set
 CONFIG_E500=y
+# CONFIG_PPC_E500MC is not set
 CONFIG_BOOKE=y
 CONFIG_FSL_BOOKE=y
 CONFIG_FSL_EMB_PERFMON=y
@@ -33,6 +34,7 @@ CONFIG_GENERIC_HARDIRQS=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
@@ -89,7 +91,6 @@ CONFIG_INITRAMFS_SOURCE=""
 CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
@@ -113,10 +114,16 @@ CONFIG_SLAB=y
 # CONFIG_PROFILING is not set
 # CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
+CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
 # CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+# CONFIG_HAVE_CLK is not set
 CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
@@ -127,6 +134,7 @@ CONFIG_BLOCK=y
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -145,8 +153,6 @@ CONFIG_CLASSIC_RCU=y
 #
 # Platform support
 #
-# CONFIG_PPC_MPC512x is not set
-# CONFIG_PPC_MPC5121 is not set
 # CONFIG_PPC_CELL is not set
 # CONFIG_PPC_CELL_NATIVE is not set
 # CONFIG_PQ2ADS is not set
@@ -155,11 +161,13 @@ CONFIG_MPC85xx=y
 # CONFIG_MPC8560_ADS is not set
 # CONFIG_MPC85xx_CDS is not set
 # CONFIG_MPC85xx_MDS is not set
+# CONFIG_MPC8536_DS is not set
 # CONFIG_MPC85xx_DS is not set
 # CONFIG_KSI8560 is not set
 # CONFIG_STX_GP3 is not set
 # CONFIG_TQM8540 is not set
 # CONFIG_TQM8541 is not set
+# CONFIG_TQM8548 is not set
 # CONFIG_TQM8555 is not set
 # CONFIG_TQM8560 is not set
 # CONFIG_SBC8548 is not set
@@ -214,6 +222,7 @@ CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_MIGRATION=y
 # CONFIG_RESOURCES_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
@@ -221,6 +230,7 @@ CONFIG_VIRT_TO_BUS=y
 CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
+CONFIG_EXTRA_TARGETS=""
 # CONFIG_PM is not set
 # CONFIG_SECCOMP is not set
 CONFIG_ISA_DMA_API=y
@@ -230,6 +240,7 @@ CONFIG_ISA_DMA_API=y
 #
 CONFIG_ZONE_DMA=y
 CONFIG_FSL_SOC=y
+CONFIG_PPC_PCI_CHOICE=y
 # CONFIG_PCI is not set
 # CONFIG_PCI_DOMAINS is not set
 # CONFIG_PCI_SYSCALL is not set
@@ -251,10 +262,6 @@ CONFIG_KERNEL_START=0xc0000000
 CONFIG_PHYSICAL_START=0x00000000
 CONFIG_PHYSICAL_ALIGN=0x10000000
 CONFIG_TASK_SIZE=0xc0000000
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -366,6 +373,7 @@ CONFIG_BLK_DEV_RAM_SIZE=32768
 # CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
@@ -383,7 +391,6 @@ CONFIG_HAVE_IDE=y
 # CONFIG_MD is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -415,9 +422,7 @@ CONFIG_MII=y
 # CONFIG_IBM_NEW_EMAC_EMAC4 is not set
 # CONFIG_B44 is not set
 CONFIG_NETDEV_1000=y
-# CONFIG_E1000E_ENABLED is not set
 CONFIG_GIANFAR=y
-CONFIG_GFAR_NAPI=y
 CONFIG_NETDEV_10000=y
 
 #
@@ -501,6 +506,8 @@ CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_TCG_TPM is not set
 # CONFIG_I2C is not set
 # CONFIG_SPI is not set
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+# CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 CONFIG_HWMON=y
@@ -517,6 +524,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_W83627EHF is not set
 # CONFIG_HWMON_DEBUG_CHIP is not set
 # CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
 
 #
@@ -528,8 +536,10 @@ CONFIG_SSB_POSSIBLE=y
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
 
 #
 # Multimedia devices
@@ -559,10 +569,6 @@ CONFIG_VIDEO_OUTPUT_CONTROL=y
 # Display device support
 #
 # CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Sound
-#
 # CONFIG_SOUND is not set
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
@@ -576,6 +582,10 @@ CONFIG_USB_SUPPORT=y
 # CONFIG_USB_OTG_BLACKLIST_HUB is not set
 
 #
+# Enable Host or Gadget support to see Inventra options
+#
+
+#
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
 #
 # CONFIG_USB_GADGET is not set
@@ -679,6 +689,7 @@ CONFIG_TMPFS=y
 # CONFIG_CRAMFS is not set
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
 # CONFIG_ROMFS_FS is not set
@@ -688,12 +699,11 @@ CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 # CONFIG_NFS_V3 is not set
 # CONFIG_NFS_V4 is not set
-# CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
 CONFIG_LOCKD=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -729,6 +739,7 @@ CONFIG_BITREVERSE=y
 # CONFIG_GENERIC_FIND_FIRST_BIT is not set
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
 # CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
@@ -753,6 +764,8 @@ CONFIG_MAGIC_SYSRQ=y
 CONFIG_DEBUG_KERNEL=y
 # CONFIG_DEBUG_SHIRQ is not set
 CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
 CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
@@ -769,16 +782,29 @@ CONFIG_DEBUG_MUTEXES=y
 # CONFIG_DEBUG_INFO is not set
 # CONFIG_DEBUG_VM is not set
 # CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+# CONFIG_FTRACE is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
 # CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
 # CONFIG_DEBUG_PAGEALLOC is not set
-# CONFIG_DEBUGGER is not set
+# CONFIG_CODE_PATCHING_SELFTEST is not set
+# CONFIG_FTR_FIXUP_SELFTEST is not set
+# CONFIG_XMON is not set
 # CONFIG_IRQSTACKS is not set
 # CONFIG_BDI_SWITCH is not set
 CONFIG_PPC_EARLY_DEBUG=y
@@ -842,6 +868,10 @@ CONFIG_CRYPTO=y
 # CONFIG_CRYPTO_MD4 is not set
 # CONFIG_CRYPTO_MD5 is not set
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
 # CONFIG_CRYPTO_SHA1 is not set
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
@@ -873,5 +903,6 @@ CONFIG_CRYPTO=y
 # CONFIG_CRYPTO_DEFLATE is not set
 # CONFIG_CRYPTO_LZO is not set
 CONFIG_CRYPTO_HW=y
+# CONFIG_CRYPTO_DEV_TALITOS is not set
 # CONFIG_PPC_CLOCK is not set
 # CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/85xx/stx_gp3_defconfig b/arch/powerpc/configs/85xx/stx_gp3_defconfig
index 7804ca1ecc94..2b05d43f8f7e 100644
--- a/arch/powerpc/configs/85xx/stx_gp3_defconfig
+++ b/arch/powerpc/configs/85xx/stx_gp3_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc5
-# Mon Jun  9 08:52:38 2008
+# Linux kernel version: 2.6.27-rc4
+# Thu Aug 21 00:52:37 2008
 #
 # CONFIG_PPC64 is not set
 
@@ -15,6 +15,7 @@ CONFIG_PPC_85xx=y
 # CONFIG_44x is not set
 # CONFIG_E200 is not set
 CONFIG_E500=y
+# CONFIG_PPC_E500MC is not set
 CONFIG_BOOKE=y
 CONFIG_FSL_BOOKE=y
 CONFIG_FSL_EMB_PERFMON=y
@@ -33,12 +34,14 @@ CONFIG_GENERIC_HARDIRQS=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_GENERIC_GPIO=y
 # CONFIG_ARCH_NO_VIRT_TO_BUS is not set
 CONFIG_PPC=y
 CONFIG_EARLY_PRINTK=y
@@ -89,7 +92,6 @@ CONFIG_INITRAMFS_SOURCE=""
 CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
@@ -115,10 +117,16 @@ CONFIG_SLUB=y
 # CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
+CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
 # CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+CONFIG_HAVE_CLK=y
 CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
@@ -134,6 +142,7 @@ CONFIG_BLOCK=y
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -152,8 +161,6 @@ CONFIG_CLASSIC_RCU=y
 #
 # Platform support
 #
-# CONFIG_PPC_MPC512x is not set
-# CONFIG_PPC_MPC5121 is not set
 # CONFIG_PPC_CELL is not set
 # CONFIG_PPC_CELL_NATIVE is not set
 # CONFIG_PQ2ADS is not set
@@ -162,11 +169,13 @@ CONFIG_MPC85xx=y
 # CONFIG_MPC8560_ADS is not set
 # CONFIG_MPC85xx_CDS is not set
 # CONFIG_MPC85xx_MDS is not set
+# CONFIG_MPC8536_DS is not set
 # CONFIG_MPC85xx_DS is not set
 # CONFIG_KSI8560 is not set
 CONFIG_STX_GP3=y
 # CONFIG_TQM8540 is not set
 # CONFIG_TQM8541 is not set
+# CONFIG_TQM8548 is not set
 # CONFIG_TQM8555 is not set
 # CONFIG_TQM8560 is not set
 # CONFIG_SBC8548 is not set
@@ -183,7 +192,6 @@ CONFIG_MPIC=y
 # CONFIG_GENERIC_IOMAP is not set
 # CONFIG_CPU_FREQ is not set
 CONFIG_CPM2=y
-CONFIG_PPC_CPM_NEW_BINDING=y
 # CONFIG_FSL_ULI1575 is not set
 CONFIG_CPM=y
 
@@ -223,6 +231,7 @@ CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_MIGRATION=y
 # CONFIG_RESOURCES_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
@@ -230,6 +239,7 @@ CONFIG_VIRT_TO_BUS=y
 CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
+CONFIG_EXTRA_TARGETS=""
 # CONFIG_PM is not set
 CONFIG_SECCOMP=y
 CONFIG_ISA_DMA_API=y
@@ -241,6 +251,7 @@ CONFIG_ZONE_DMA=y
 CONFIG_PPC_INDIRECT_PCI=y
 CONFIG_FSL_SOC=y
 CONFIG_FSL_PCI=y
+CONFIG_PPC_PCI_CHOICE=y
 CONFIG_PCI=y
 CONFIG_PCI_DOMAINS=y
 CONFIG_PCI_SYSCALL=y
@@ -267,10 +278,6 @@ CONFIG_KERNEL_START=0xc0000000
 CONFIG_PHYSICAL_START=0x00000000
 CONFIG_PHYSICAL_ALIGN=0x10000000
 CONFIG_TASK_SIZE=0xc0000000
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -426,6 +433,7 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_CONNECTOR is not set
 # CONFIG_MTD is not set
 CONFIG_OF_DEVICE=y
+CONFIG_OF_GPIO=y
 CONFIG_OF_I2C=m
 CONFIG_PARPORT=m
 CONFIG_PARPORT_PC=m
@@ -452,15 +460,16 @@ CONFIG_BLK_DEV_RAM_SIZE=32768
 # CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_PHANTOM is not set
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_HP_ILO is not set
 CONFIG_HAVE_IDE=y
 CONFIG_IDE=y
-CONFIG_IDE_MAX_HWIFS=4
 CONFIG_BLK_DEV_IDE=y
 
 #
@@ -480,7 +489,6 @@ CONFIG_IDE_PROC_FS=y
 #
 # IDE chipset support/bugfixes
 #
-CONFIG_IDE_GENERIC=y
 # CONFIG_BLK_DEV_PLATFORM is not set
 
 #
@@ -493,10 +501,8 @@ CONFIG_IDE_GENERIC=y
 # CONFIG_BLK_DEV_AMD74XX is not set
 # CONFIG_BLK_DEV_CMD64X is not set
 # CONFIG_BLK_DEV_TRIFLEX is not set
-# CONFIG_BLK_DEV_CY82C693 is not set
 # CONFIG_BLK_DEV_CS5520 is not set
 # CONFIG_BLK_DEV_CS5530 is not set
-# CONFIG_BLK_DEV_HPT34X is not set
 # CONFIG_BLK_DEV_HPT366 is not set
 # CONFIG_BLK_DEV_JMICRON is not set
 # CONFIG_BLK_DEV_SC1200 is not set
@@ -514,8 +520,6 @@ CONFIG_IDE_GENERIC=y
 # CONFIG_BLK_DEV_VIA82CXXX is not set
 # CONFIG_BLK_DEV_TC86C001 is not set
 # CONFIG_BLK_DEV_IDEDMA is not set
-# CONFIG_BLK_DEV_HD_ONLY is not set
-# CONFIG_BLK_DEV_HD is not set
 
 #
 # SCSI device support
@@ -594,6 +598,7 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_NSP32 is not set
 # CONFIG_SCSI_DEBUG is not set
 # CONFIG_SCSI_SRP is not set
+# CONFIG_SCSI_DH is not set
 # CONFIG_ATA is not set
 # CONFIG_MD is not set
 # CONFIG_FUSION is not set
@@ -601,12 +606,15 @@ CONFIG_SCSI_LOWLEVEL=y
 #
 # IEEE 1394 (FireWire) support
 #
+
+#
+# Enable only one of the two stacks, unless you know what you are doing
+#
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -652,7 +660,6 @@ CONFIG_NETDEV_1000=y
 # CONFIG_DL2K is not set
 # CONFIG_E1000 is not set
 # CONFIG_E1000E is not set
-# CONFIG_E1000E_ENABLED is not set
 # CONFIG_IP1000 is not set
 # CONFIG_IGB is not set
 # CONFIG_NS83820 is not set
@@ -666,9 +673,9 @@ CONFIG_NETDEV_1000=y
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
 CONFIG_GIANFAR=y
-CONFIG_GFAR_NAPI=y
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
+# CONFIG_ATL1E is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
 # CONFIG_CHELSIO_T3 is not set
@@ -731,6 +738,7 @@ CONFIG_KEYBOARD_ATKBD=y
 # CONFIG_KEYBOARD_XTKBD is not set
 # CONFIG_KEYBOARD_NEWTON is not set
 # CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_GPIO is not set
 CONFIG_INPUT_MOUSE=y
 CONFIG_MOUSE_PS2=y
 CONFIG_MOUSE_PS2_ALPS=y
@@ -741,7 +749,9 @@ CONFIG_MOUSE_PS2_TRACKPOINT=y
 # CONFIG_MOUSE_PS2_TOUCHKIT is not set
 # CONFIG_MOUSE_SERIAL is not set
 # CONFIG_MOUSE_APPLETOUCH is not set
+# CONFIG_MOUSE_BCM5974 is not set
 # CONFIG_MOUSE_VSXXXAA is not set
+# CONFIG_MOUSE_GPIO is not set
 # CONFIG_INPUT_JOYSTICK is not set
 # CONFIG_INPUT_TABLET is not set
 # CONFIG_INPUT_TOUCHSCREEN is not set
@@ -757,6 +767,7 @@ CONFIG_SERIO_SERPORT=y
 # CONFIG_SERIO_PCIPS2 is not set
 CONFIG_SERIO_LIBPS2=y
 # CONFIG_SERIO_RAW is not set
+# CONFIG_SERIO_XILINX_XPS_PS2 is not set
 # CONFIG_GAMEPORT is not set
 
 #
@@ -805,44 +816,68 @@ CONFIG_DEVPORT=y
 CONFIG_I2C=m
 CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=m
+CONFIG_I2C_HELPER_AUTO=y
 
 #
 # I2C Hardware Bus support
 #
+
+#
+# PC SMBus host controller drivers
+#
 # CONFIG_I2C_ALI1535 is not set
 # CONFIG_I2C_ALI1563 is not set
 # CONFIG_I2C_ALI15X3 is not set
 # CONFIG_I2C_AMD756 is not set
 # CONFIG_I2C_AMD8111 is not set
 # CONFIG_I2C_I801 is not set
-# CONFIG_I2C_I810 is not set
+# CONFIG_I2C_ISCH is not set
 # CONFIG_I2C_PIIX4 is not set
-# CONFIG_I2C_MPC is not set
 # CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_PROSAVAGE is not set
-# CONFIG_I2C_SAVAGE4 is not set
-# CONFIG_I2C_SIMTEC is not set
 # CONFIG_I2C_SIS5595 is not set
 # CONFIG_I2C_SIS630 is not set
 # CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_STUB is not set
 # CONFIG_I2C_VIA is not set
 # CONFIG_I2C_VIAPRO is not set
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+# CONFIG_I2C_CPM is not set
+# CONFIG_I2C_GPIO is not set
+# CONFIG_I2C_MPC is not set
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT is not set
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+
+#
+# Graphics adapter I2C/DDC channel drivers
+#
 # CONFIG_I2C_VOODOO3 is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
 # CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
 
 #
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
+# CONFIG_AT24 is not set
 # CONFIG_SENSORS_EEPROM is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_TPS65010 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
@@ -850,10 +885,32 @@ CONFIG_I2C_CHARDEV=m
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
 # CONFIG_SPI is not set
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+# CONFIG_GPIO_SYSFS is not set
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
+
+#
+# PCI GPIO expanders:
+#
+# CONFIG_GPIO_BT8XX is not set
+
+#
+# SPI GPIO expanders:
+#
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 CONFIG_HWMON=y
 # CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_AD7414 is not set
 # CONFIG_SENSORS_AD7418 is not set
 # CONFIG_SENSORS_ADM1021 is not set
 # CONFIG_SENSORS_ADM1025 is not set
@@ -907,6 +964,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_W83627EHF is not set
 # CONFIG_HWMON_DEBUG_CHIP is not set
 # CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
 
 #
@@ -918,8 +976,10 @@ CONFIG_SSB_POSSIBLE=y
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
 
 #
 # Multimedia devices
@@ -958,20 +1018,8 @@ CONFIG_DRM=m
 # Display device support
 #
 # CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Sound
-#
 CONFIG_SOUND=m
-
-#
-# Advanced Linux Sound Architecture
-#
 # CONFIG_SND is not set
-
-#
-# Open Sound System
-#
 # CONFIG_SOUND_PRIME is not set
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
@@ -986,6 +1034,10 @@ CONFIG_USB_ARCH_HAS_EHCI=y
 # CONFIG_USB_OTG_BLACKLIST_HUB is not set
 
 #
+# Enable Host or Gadget support to see Inventra options
+#
+
+#
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
 #
 # CONFIG_USB_GADGET is not set
@@ -1070,6 +1122,7 @@ CONFIG_TMPFS=y
 CONFIG_CRAMFS=m
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
 # CONFIG_ROMFS_FS is not set
@@ -1080,13 +1133,12 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 # CONFIG_NFS_V4 is not set
-# CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 CONFIG_SMB_FS=m
@@ -1150,6 +1202,7 @@ CONFIG_BITREVERSE=y
 # CONFIG_GENERIC_FIND_FIRST_BIT is not set
 CONFIG_CRC_CCITT=y
 # CONFIG_CRC16 is not set
+CONFIG_CRC_T10DIF=m
 CONFIG_CRC_ITU_T=m
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
@@ -1175,6 +1228,8 @@ CONFIG_FRAME_WARN=1024
 CONFIG_DEBUG_KERNEL=y
 # CONFIG_DEBUG_SHIRQ is not set
 CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
 CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
@@ -1193,18 +1248,29 @@ CONFIG_SCHED_DEBUG=y
 # CONFIG_DEBUG_INFO is not set
 # CONFIG_DEBUG_VM is not set
 # CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+# CONFIG_FTRACE is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
 # CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
 # CONFIG_DEBUG_PAGEALLOC is not set
-# CONFIG_DEBUGGER is not set
-# CONFIG_KGDB_CONSOLE is not set
+# CONFIG_CODE_PATCHING_SELFTEST is not set
+# CONFIG_FTR_FIXUP_SELFTEST is not set
+# CONFIG_XMON is not set
 # CONFIG_IRQSTACKS is not set
 CONFIG_BDI_SWITCH=y
 # CONFIG_PPC_EARLY_DEBUG is not set
@@ -1258,6 +1324,10 @@ CONFIG_CRYPTO=y
 # CONFIG_CRYPTO_MD4 is not set
 # CONFIG_CRYPTO_MD5 is not set
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
 # CONFIG_CRYPTO_SHA1 is not set
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
@@ -1290,6 +1360,7 @@ CONFIG_CRYPTO=y
 # CONFIG_CRYPTO_LZO is not set
 CONFIG_CRYPTO_HW=y
 # CONFIG_CRYPTO_DEV_HIFN_795X is not set
-# CONFIG_PPC_CLOCK is not set
+# CONFIG_CRYPTO_DEV_TALITOS is not set
+CONFIG_PPC_CLOCK=y
 CONFIG_PPC_LIB_RHEAP=y
 # CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/85xx/tqm8540_defconfig b/arch/powerpc/configs/85xx/tqm8540_defconfig
index e0b5559e84aa..1b2d5d577915 100644
--- a/arch/powerpc/configs/85xx/tqm8540_defconfig
+++ b/arch/powerpc/configs/85xx/tqm8540_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc5
-# Mon Jun  9 08:52:39 2008
+# Linux kernel version: 2.6.27-rc4
+# Thu Aug 21 00:52:37 2008
 #
 # CONFIG_PPC64 is not set
 
@@ -15,6 +15,7 @@ CONFIG_PPC_85xx=y
 # CONFIG_44x is not set
 # CONFIG_E200 is not set
 CONFIG_E500=y
+# CONFIG_PPC_E500MC is not set
 CONFIG_BOOKE=y
 CONFIG_FSL_BOOKE=y
 CONFIG_FSL_EMB_PERFMON=y
@@ -33,6 +34,7 @@ CONFIG_GENERIC_HARDIRQS=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
@@ -89,7 +91,6 @@ CONFIG_INITRAMFS_SOURCE=""
 CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
 # CONFIG_KALLSYMS is not set
 # CONFIG_HOTPLUG is not set
 CONFIG_PRINTK=y
@@ -112,10 +113,16 @@ CONFIG_SLUB=y
 # CONFIG_PROFILING is not set
 # CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
+CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
 # CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+# CONFIG_HAVE_CLK is not set
 CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
@@ -126,6 +133,7 @@ CONFIG_BLOCK=y
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -144,8 +152,6 @@ CONFIG_CLASSIC_RCU=y
 #
 # Platform support
 #
-# CONFIG_PPC_MPC512x is not set
-# CONFIG_PPC_MPC5121 is not set
 # CONFIG_PPC_CELL is not set
 # CONFIG_PPC_CELL_NATIVE is not set
 # CONFIG_PQ2ADS is not set
@@ -154,11 +160,13 @@ CONFIG_MPC85xx=y
 # CONFIG_MPC8560_ADS is not set
 # CONFIG_MPC85xx_CDS is not set
 # CONFIG_MPC85xx_MDS is not set
+# CONFIG_MPC8536_DS is not set
 # CONFIG_MPC85xx_DS is not set
 # CONFIG_KSI8560 is not set
 # CONFIG_STX_GP3 is not set
 CONFIG_TQM8540=y
 # CONFIG_TQM8541 is not set
+# CONFIG_TQM8548 is not set
 # CONFIG_TQM8555 is not set
 # CONFIG_TQM8560 is not set
 # CONFIG_SBC8548 is not set
@@ -214,6 +222,7 @@ CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_MIGRATION=y
 # CONFIG_RESOURCES_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
@@ -221,6 +230,7 @@ CONFIG_VIRT_TO_BUS=y
 CONFIG_FORCE_MAX_ZONEORDER=11
 # CONFIG_PROC_DEVICETREE is not set
 # CONFIG_CMDLINE_BOOL is not set
+CONFIG_EXTRA_TARGETS=""
 # CONFIG_PM is not set
 CONFIG_SECCOMP=y
 CONFIG_ISA_DMA_API=y
@@ -232,6 +242,7 @@ CONFIG_ZONE_DMA=y
 CONFIG_PPC_INDIRECT_PCI=y
 CONFIG_FSL_SOC=y
 CONFIG_FSL_PCI=y
+CONFIG_PPC_PCI_CHOICE=y
 CONFIG_PCI=y
 CONFIG_PCI_DOMAINS=y
 CONFIG_PCI_SYSCALL=y
@@ -255,10 +266,6 @@ CONFIG_KERNEL_START=0xc0000000
 CONFIG_PHYSICAL_START=0x00000000
 CONFIG_PHYSICAL_ALIGN=0x10000000
 CONFIG_TASK_SIZE=0xc0000000
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -449,20 +456,22 @@ CONFIG_BLK_DEV_RAM_SIZE=32768
 # CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_PHANTOM is not set
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_HP_ILO is not set
 CONFIG_HAVE_IDE=y
 CONFIG_IDE=y
-CONFIG_IDE_MAX_HWIFS=4
 CONFIG_BLK_DEV_IDE=y
 
 #
 # Please see Documentation/ide/ide.txt for help/info on IDE drives
 #
+CONFIG_IDE_TIMINGS=y
 # CONFIG_BLK_DEV_IDE_SATA is not set
 CONFIG_BLK_DEV_IDEDISK=y
 # CONFIG_IDEDISK_MULTI_MODE is not set
@@ -475,7 +484,6 @@ CONFIG_IDE_PROC_FS=y
 #
 # IDE chipset support/bugfixes
 #
-CONFIG_IDE_GENERIC=y
 # CONFIG_BLK_DEV_PLATFORM is not set
 CONFIG_BLK_DEV_IDEDMA_SFF=y
 
@@ -493,10 +501,8 @@ CONFIG_BLK_DEV_IDEDMA_PCI=y
 # CONFIG_BLK_DEV_AMD74XX is not set
 # CONFIG_BLK_DEV_CMD64X is not set
 # CONFIG_BLK_DEV_TRIFLEX is not set
-# CONFIG_BLK_DEV_CY82C693 is not set
 # CONFIG_BLK_DEV_CS5520 is not set
 # CONFIG_BLK_DEV_CS5530 is not set
-# CONFIG_BLK_DEV_HPT34X is not set
 # CONFIG_BLK_DEV_HPT366 is not set
 # CONFIG_BLK_DEV_JMICRON is not set
 # CONFIG_BLK_DEV_SC1200 is not set
@@ -514,8 +520,6 @@ CONFIG_BLK_DEV_IDEDMA_PCI=y
 CONFIG_BLK_DEV_VIA82CXXX=y
 # CONFIG_BLK_DEV_TC86C001 is not set
 CONFIG_BLK_DEV_IDEDMA=y
-# CONFIG_BLK_DEV_HD_ONLY is not set
-# CONFIG_BLK_DEV_HD is not set
 
 #
 # SCSI device support
@@ -531,12 +535,15 @@ CONFIG_BLK_DEV_IDEDMA=y
 #
 # IEEE 1394 (FireWire) support
 #
+
+#
+# Enable only one of the two stacks, unless you know what you are doing
+#
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -598,7 +605,6 @@ CONFIG_NETDEV_1000=y
 # CONFIG_DL2K is not set
 # CONFIG_E1000 is not set
 # CONFIG_E1000E is not set
-# CONFIG_E1000E_ENABLED is not set
 # CONFIG_IP1000 is not set
 # CONFIG_IGB is not set
 # CONFIG_NS83820 is not set
@@ -612,9 +618,9 @@ CONFIG_NETDEV_1000=y
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
 CONFIG_GIANFAR=y
-CONFIG_GFAR_NAPI=y
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
+# CONFIG_ATL1E is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
 # CONFIG_CHELSIO_T3 is not set
@@ -721,41 +727,62 @@ CONFIG_DEVPORT=y
 CONFIG_I2C=y
 CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
 
 #
 # I2C Hardware Bus support
 #
+
+#
+# PC SMBus host controller drivers
+#
 # CONFIG_I2C_ALI1535 is not set
 # CONFIG_I2C_ALI1563 is not set
 # CONFIG_I2C_ALI15X3 is not set
 # CONFIG_I2C_AMD756 is not set
 # CONFIG_I2C_AMD8111 is not set
 # CONFIG_I2C_I801 is not set
-# CONFIG_I2C_I810 is not set
+# CONFIG_I2C_ISCH is not set
 # CONFIG_I2C_PIIX4 is not set
-CONFIG_I2C_MPC=y
 # CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_PROSAVAGE is not set
-# CONFIG_I2C_SAVAGE4 is not set
-# CONFIG_I2C_SIMTEC is not set
 # CONFIG_I2C_SIS5595 is not set
 # CONFIG_I2C_SIS630 is not set
 # CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_TAOS_EVM is not set
 # CONFIG_I2C_VIA is not set
 # CONFIG_I2C_VIAPRO is not set
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+CONFIG_I2C_MPC=y
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+
+#
+# Graphics adapter I2C/DDC channel drivers
+#
 # CONFIG_I2C_VOODOO3 is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
 # CONFIG_I2C_PCA_PLATFORM is not set
 
 #
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
+# CONFIG_AT24 is not set
 # CONFIG_SENSORS_EEPROM is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
@@ -764,10 +791,13 @@ CONFIG_I2C_MPC=y
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
 # CONFIG_SPI is not set
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+# CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 CONFIG_HWMON=y
 # CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_AD7414 is not set
 # CONFIG_SENSORS_AD7418 is not set
 # CONFIG_SENSORS_ADM1021 is not set
 # CONFIG_SENSORS_ADM1025 is not set
@@ -821,6 +851,7 @@ CONFIG_SENSORS_LM75=y
 # CONFIG_SENSORS_W83627EHF is not set
 CONFIG_HWMON_DEBUG_CHIP=y
 # CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
 
 #
@@ -832,8 +863,10 @@ CONFIG_SSB_POSSIBLE=y
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
 
 #
 # Multimedia devices
@@ -865,10 +898,6 @@ CONFIG_DAB=y
 # Display device support
 #
 # CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Sound
-#
 # CONFIG_SOUND is not set
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
@@ -883,6 +912,10 @@ CONFIG_USB_ARCH_HAS_EHCI=y
 # CONFIG_USB_OTG_BLACKLIST_HUB is not set
 
 #
+# Enable Host or Gadget support to see Inventra options
+#
+
+#
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
 #
 # CONFIG_USB_GADGET is not set
@@ -971,6 +1004,7 @@ CONFIG_JFFS2_RTIME=y
 CONFIG_CRAMFS=y
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
 # CONFIG_ROMFS_FS is not set
@@ -980,12 +1014,11 @@ CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 # CONFIG_NFS_V3 is not set
 # CONFIG_NFS_V4 is not set
-# CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
 CONFIG_LOCKD=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -1021,6 +1054,7 @@ CONFIG_BITREVERSE=y
 # CONFIG_GENERIC_FIND_FIRST_BIT is not set
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
 # CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
@@ -1048,7 +1082,16 @@ CONFIG_FRAME_WARN=1024
 # CONFIG_SLUB_DEBUG_ON is not set
 # CONFIG_SLUB_STATS is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+# CONFIG_FTRACE is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
 # CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_IRQSTACKS is not set
 # CONFIG_PPC_EARLY_DEBUG is not set
 
@@ -1100,6 +1143,10 @@ CONFIG_CRYPTO=y
 # CONFIG_CRYPTO_MD4 is not set
 # CONFIG_CRYPTO_MD5 is not set
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
 # CONFIG_CRYPTO_SHA1 is not set
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
@@ -1132,5 +1179,6 @@ CONFIG_CRYPTO=y
 # CONFIG_CRYPTO_LZO is not set
 CONFIG_CRYPTO_HW=y
 # CONFIG_CRYPTO_DEV_HIFN_795X is not set
+# CONFIG_CRYPTO_DEV_TALITOS is not set
 # CONFIG_PPC_CLOCK is not set
 # CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/85xx/tqm8541_defconfig b/arch/powerpc/configs/85xx/tqm8541_defconfig
index 6f9067b49e07..da841a09755c 100644
--- a/arch/powerpc/configs/85xx/tqm8541_defconfig
+++ b/arch/powerpc/configs/85xx/tqm8541_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc5
-# Mon Jun  9 08:52:40 2008
+# Linux kernel version: 2.6.27-rc4
+# Thu Aug 21 00:52:39 2008
 #
 # CONFIG_PPC64 is not set
 
@@ -15,6 +15,7 @@ CONFIG_PPC_85xx=y
 # CONFIG_44x is not set
 # CONFIG_E200 is not set
 CONFIG_E500=y
+# CONFIG_PPC_E500MC is not set
 CONFIG_BOOKE=y
 CONFIG_FSL_BOOKE=y
 CONFIG_FSL_EMB_PERFMON=y
@@ -33,12 +34,14 @@ CONFIG_GENERIC_HARDIRQS=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_GENERIC_GPIO=y
 # CONFIG_ARCH_NO_VIRT_TO_BUS is not set
 CONFIG_PPC=y
 CONFIG_EARLY_PRINTK=y
@@ -89,7 +92,6 @@ CONFIG_INITRAMFS_SOURCE=""
 CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
 # CONFIG_KALLSYMS is not set
 # CONFIG_HOTPLUG is not set
 CONFIG_PRINTK=y
@@ -112,10 +114,16 @@ CONFIG_SLUB=y
 # CONFIG_PROFILING is not set
 # CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
+CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
 # CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+CONFIG_HAVE_CLK=y
 CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
@@ -126,6 +134,7 @@ CONFIG_BLOCK=y
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -144,8 +153,6 @@ CONFIG_CLASSIC_RCU=y
 #
 # Platform support
 #
-# CONFIG_PPC_MPC512x is not set
-# CONFIG_PPC_MPC5121 is not set
 # CONFIG_PPC_CELL is not set
 # CONFIG_PPC_CELL_NATIVE is not set
 # CONFIG_PQ2ADS is not set
@@ -154,11 +161,13 @@ CONFIG_MPC85xx=y
 # CONFIG_MPC8560_ADS is not set
 # CONFIG_MPC85xx_CDS is not set
 # CONFIG_MPC85xx_MDS is not set
+# CONFIG_MPC8536_DS is not set
 # CONFIG_MPC85xx_DS is not set
 # CONFIG_KSI8560 is not set
 # CONFIG_STX_GP3 is not set
 # CONFIG_TQM8540 is not set
 CONFIG_TQM8541=y
+# CONFIG_TQM8548 is not set
 # CONFIG_TQM8555 is not set
 # CONFIG_TQM8560 is not set
 # CONFIG_SBC8548 is not set
@@ -176,7 +185,6 @@ CONFIG_MPIC=y
 # CONFIG_GENERIC_IOMAP is not set
 # CONFIG_CPU_FREQ is not set
 CONFIG_CPM2=y
-CONFIG_PPC_CPM_NEW_BINDING=y
 # CONFIG_FSL_ULI1575 is not set
 CONFIG_CPM=y
 
@@ -216,6 +224,7 @@ CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_MIGRATION=y
 # CONFIG_RESOURCES_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
@@ -223,6 +232,7 @@ CONFIG_VIRT_TO_BUS=y
 CONFIG_FORCE_MAX_ZONEORDER=11
 # CONFIG_PROC_DEVICETREE is not set
 # CONFIG_CMDLINE_BOOL is not set
+CONFIG_EXTRA_TARGETS=""
 # CONFIG_PM is not set
 CONFIG_SECCOMP=y
 CONFIG_ISA_DMA_API=y
@@ -234,6 +244,7 @@ CONFIG_ZONE_DMA=y
 CONFIG_PPC_INDIRECT_PCI=y
 CONFIG_FSL_SOC=y
 CONFIG_FSL_PCI=y
+CONFIG_PPC_PCI_CHOICE=y
 CONFIG_PCI=y
 CONFIG_PCI_DOMAINS=y
 CONFIG_PCI_SYSCALL=y
@@ -257,10 +268,6 @@ CONFIG_KERNEL_START=0xc0000000
 CONFIG_PHYSICAL_START=0x00000000
 CONFIG_PHYSICAL_ALIGN=0x10000000
 CONFIG_TASK_SIZE=0xc0000000
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -432,6 +439,7 @@ CONFIG_MTD_CFI_UTIL=y
 #
 # CONFIG_MTD_UBI is not set
 CONFIG_OF_DEVICE=y
+CONFIG_OF_GPIO=y
 CONFIG_OF_I2C=y
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
@@ -451,20 +459,22 @@ CONFIG_BLK_DEV_RAM_SIZE=32768
 # CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_PHANTOM is not set
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_HP_ILO is not set
 CONFIG_HAVE_IDE=y
 CONFIG_IDE=y
-CONFIG_IDE_MAX_HWIFS=4
 CONFIG_BLK_DEV_IDE=y
 
 #
 # Please see Documentation/ide/ide.txt for help/info on IDE drives
 #
+CONFIG_IDE_TIMINGS=y
 # CONFIG_BLK_DEV_IDE_SATA is not set
 CONFIG_BLK_DEV_IDEDISK=y
 # CONFIG_IDEDISK_MULTI_MODE is not set
@@ -477,7 +487,6 @@ CONFIG_IDE_PROC_FS=y
 #
 # IDE chipset support/bugfixes
 #
-CONFIG_IDE_GENERIC=y
 # CONFIG_BLK_DEV_PLATFORM is not set
 CONFIG_BLK_DEV_IDEDMA_SFF=y
 
@@ -495,10 +504,8 @@ CONFIG_BLK_DEV_IDEDMA_PCI=y
 # CONFIG_BLK_DEV_AMD74XX is not set
 # CONFIG_BLK_DEV_CMD64X is not set
 # CONFIG_BLK_DEV_TRIFLEX is not set
-# CONFIG_BLK_DEV_CY82C693 is not set
 # CONFIG_BLK_DEV_CS5520 is not set
 # CONFIG_BLK_DEV_CS5530 is not set
-# CONFIG_BLK_DEV_HPT34X is not set
 # CONFIG_BLK_DEV_HPT366 is not set
 # CONFIG_BLK_DEV_JMICRON is not set
 # CONFIG_BLK_DEV_SC1200 is not set
@@ -516,8 +523,6 @@ CONFIG_BLK_DEV_IDEDMA_PCI=y
 CONFIG_BLK_DEV_VIA82CXXX=y
 # CONFIG_BLK_DEV_TC86C001 is not set
 CONFIG_BLK_DEV_IDEDMA=y
-# CONFIG_BLK_DEV_HD_ONLY is not set
-# CONFIG_BLK_DEV_HD is not set
 
 #
 # SCSI device support
@@ -533,12 +538,15 @@ CONFIG_BLK_DEV_IDEDMA=y
 #
 # IEEE 1394 (FireWire) support
 #
+
+#
+# Enable only one of the two stacks, unless you know what you are doing
+#
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -601,7 +609,6 @@ CONFIG_NETDEV_1000=y
 # CONFIG_DL2K is not set
 # CONFIG_E1000 is not set
 # CONFIG_E1000E is not set
-# CONFIG_E1000E_ENABLED is not set
 # CONFIG_IP1000 is not set
 # CONFIG_IGB is not set
 # CONFIG_NS83820 is not set
@@ -615,9 +622,9 @@ CONFIG_NETDEV_1000=y
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
 CONFIG_GIANFAR=y
-CONFIG_GFAR_NAPI=y
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
+# CONFIG_ATL1E is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
 # CONFIG_CHELSIO_T3 is not set
@@ -732,42 +739,66 @@ CONFIG_DEVPORT=y
 CONFIG_I2C=y
 CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
 
 #
 # I2C Hardware Bus support
 #
+
+#
+# PC SMBus host controller drivers
+#
 # CONFIG_I2C_ALI1535 is not set
 # CONFIG_I2C_ALI1563 is not set
 # CONFIG_I2C_ALI15X3 is not set
 # CONFIG_I2C_AMD756 is not set
 # CONFIG_I2C_AMD8111 is not set
 # CONFIG_I2C_I801 is not set
-# CONFIG_I2C_I810 is not set
+# CONFIG_I2C_ISCH is not set
 # CONFIG_I2C_PIIX4 is not set
-CONFIG_I2C_MPC=y
 # CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_PROSAVAGE is not set
-# CONFIG_I2C_SAVAGE4 is not set
-# CONFIG_I2C_SIMTEC is not set
 # CONFIG_I2C_SIS5595 is not set
 # CONFIG_I2C_SIS630 is not set
 # CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_TAOS_EVM is not set
 # CONFIG_I2C_VIA is not set
 # CONFIG_I2C_VIAPRO is not set
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+# CONFIG_I2C_CPM is not set
+# CONFIG_I2C_GPIO is not set
+CONFIG_I2C_MPC=y
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+
+#
+# Graphics adapter I2C/DDC channel drivers
+#
 # CONFIG_I2C_VOODOO3 is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
 # CONFIG_I2C_PCA_PLATFORM is not set
 
 #
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
+# CONFIG_AT24 is not set
 # CONFIG_SENSORS_EEPROM is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_TPS65010 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
@@ -775,10 +806,31 @@ CONFIG_I2C_MPC=y
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
 # CONFIG_SPI is not set
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_GPIO_SYSFS is not set
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
+
+#
+# PCI GPIO expanders:
+#
+# CONFIG_GPIO_BT8XX is not set
+
+#
+# SPI GPIO expanders:
+#
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 CONFIG_HWMON=y
 # CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_AD7414 is not set
 # CONFIG_SENSORS_AD7418 is not set
 # CONFIG_SENSORS_ADM1021 is not set
 # CONFIG_SENSORS_ADM1025 is not set
@@ -832,6 +884,7 @@ CONFIG_SENSORS_LM75=y
 # CONFIG_SENSORS_W83627EHF is not set
 CONFIG_HWMON_DEBUG_CHIP=y
 # CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
 
 #
@@ -843,8 +896,10 @@ CONFIG_SSB_POSSIBLE=y
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
 
 #
 # Multimedia devices
@@ -876,10 +931,6 @@ CONFIG_DAB=y
 # Display device support
 #
 # CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Sound
-#
 # CONFIG_SOUND is not set
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
@@ -894,6 +945,10 @@ CONFIG_USB_ARCH_HAS_EHCI=y
 # CONFIG_USB_OTG_BLACKLIST_HUB is not set
 
 #
+# Enable Host or Gadget support to see Inventra options
+#
+
+#
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
 #
 # CONFIG_USB_GADGET is not set
@@ -982,6 +1037,7 @@ CONFIG_JFFS2_RTIME=y
 CONFIG_CRAMFS=y
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
 # CONFIG_ROMFS_FS is not set
@@ -991,12 +1047,11 @@ CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 # CONFIG_NFS_V3 is not set
 # CONFIG_NFS_V4 is not set
-# CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
 CONFIG_LOCKD=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -1032,6 +1087,7 @@ CONFIG_BITREVERSE=y
 # CONFIG_GENERIC_FIND_FIRST_BIT is not set
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
 # CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
@@ -1059,8 +1115,16 @@ CONFIG_FRAME_WARN=1024
 # CONFIG_SLUB_DEBUG_ON is not set
 # CONFIG_SLUB_STATS is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+# CONFIG_FTRACE is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
 # CONFIG_SAMPLES is not set
-# CONFIG_KGDB_CONSOLE is not set
+CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_IRQSTACKS is not set
 # CONFIG_PPC_EARLY_DEBUG is not set
 
@@ -1112,6 +1176,10 @@ CONFIG_CRYPTO=y
 # CONFIG_CRYPTO_MD4 is not set
 # CONFIG_CRYPTO_MD5 is not set
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
 # CONFIG_CRYPTO_SHA1 is not set
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
@@ -1144,6 +1212,7 @@ CONFIG_CRYPTO=y
 # CONFIG_CRYPTO_LZO is not set
 CONFIG_CRYPTO_HW=y
 # CONFIG_CRYPTO_DEV_HIFN_795X is not set
-# CONFIG_PPC_CLOCK is not set
+# CONFIG_CRYPTO_DEV_TALITOS is not set
+CONFIG_PPC_CLOCK=y
 CONFIG_PPC_LIB_RHEAP=y
 # CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/85xx/tqm8548_defconfig b/arch/powerpc/configs/85xx/tqm8548_defconfig
index b3b770be3cc9..ca1234d26855 100644
--- a/arch/powerpc/configs/85xx/tqm8548_defconfig
+++ b/arch/powerpc/configs/85xx/tqm8548_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc5
-# Thu Jun 26 14:40:02 2008
+# Linux kernel version: 2.6.27-rc4
+# Thu Aug 21 00:52:40 2008
 #
 # CONFIG_PPC64 is not set
 
@@ -34,6 +34,7 @@ CONFIG_GENERIC_HARDIRQS=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
@@ -90,7 +91,6 @@ CONFIG_INITRAMFS_SOURCE=""
 CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
@@ -116,10 +116,16 @@ CONFIG_SLUB=y
 # CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
+CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
 # CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+# CONFIG_HAVE_CLK is not set
 CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
@@ -130,12 +136,13 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-# CONFIG_KMOD is not set
+CONFIG_KMOD=y
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -154,8 +161,6 @@ CONFIG_CLASSIC_RCU=y
 #
 # Platform support
 #
-# CONFIG_PPC_MPC512x is not set
-# CONFIG_PPC_MPC5121 is not set
 # CONFIG_PPC_CELL is not set
 # CONFIG_PPC_CELL_NATIVE is not set
 # CONFIG_PQ2ADS is not set
@@ -164,6 +169,7 @@ CONFIG_MPC85xx=y
 # CONFIG_MPC8560_ADS is not set
 # CONFIG_MPC85xx_CDS is not set
 # CONFIG_MPC85xx_MDS is not set
+# CONFIG_MPC8536_DS is not set
 # CONFIG_MPC85xx_DS is not set
 # CONFIG_KSI8560 is not set
 # CONFIG_STX_GP3 is not set
@@ -187,7 +193,6 @@ CONFIG_MPIC=y
 # CONFIG_GENERIC_IOMAP is not set
 # CONFIG_CPU_FREQ is not set
 # CONFIG_CPM2 is not set
-CONFIG_PPC_CPM_NEW_BINDING=y
 # CONFIG_FSL_ULI1575 is not set
 
 #
@@ -203,7 +208,7 @@ CONFIG_HZ_250=y
 # CONFIG_HZ_300 is not set
 # CONFIG_HZ_1000 is not set
 CONFIG_HZ=250
-# CONFIG_SCHED_HRTICK is not set
+CONFIG_SCHED_HRTICK=y
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
@@ -226,6 +231,7 @@ CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_MIGRATION=y
 # CONFIG_RESOURCES_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
@@ -233,6 +239,7 @@ CONFIG_VIRT_TO_BUS=y
 CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
+CONFIG_EXTRA_TARGETS=""
 # CONFIG_PM is not set
 # CONFIG_SECCOMP is not set
 CONFIG_ISA_DMA_API=y
@@ -244,7 +251,7 @@ CONFIG_ZONE_DMA=y
 CONFIG_PPC_INDIRECT_PCI=y
 CONFIG_FSL_SOC=y
 CONFIG_FSL_PCI=y
-CONFIG_FSL_LBC=y
+CONFIG_PPC_PCI_CHOICE=y
 CONFIG_PCI=y
 CONFIG_PCI_DOMAINS=y
 CONFIG_PCI_SYSCALL=y
@@ -273,10 +280,6 @@ CONFIG_KERNEL_START=0xc0000000
 CONFIG_PHYSICAL_START=0x00000000
 CONFIG_PHYSICAL_ALIGN=0x10000000
 CONFIG_TASK_SIZE=0xc0000000
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -455,7 +458,6 @@ CONFIG_MTD_NAND_IDS=y
 # CONFIG_MTD_NAND_NANDSIM is not set
 # CONFIG_MTD_NAND_PLATFORM is not set
 # CONFIG_MTD_NAND_FSL_ELBC is not set
-CONFIG_MTD_NAND_FSL_UPM=y
 # CONFIG_MTD_ONENAND is not set
 
 #
@@ -490,20 +492,22 @@ CONFIG_BLK_DEV_RAM_SIZE=32768
 # CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_PHANTOM is not set
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_HP_ILO is not set
 CONFIG_HAVE_IDE=y
 CONFIG_IDE=y
-CONFIG_IDE_MAX_HWIFS=4
 CONFIG_BLK_DEV_IDE=y
 
 #
 # Please see Documentation/ide/ide.txt for help/info on IDE drives
 #
+CONFIG_IDE_TIMINGS=y
 # CONFIG_BLK_DEV_IDE_SATA is not set
 # CONFIG_BLK_DEV_IDEDISK is not set
 # CONFIG_IDEDISK_MULTI_MODE is not set
@@ -516,7 +520,6 @@ CONFIG_IDE_PROC_FS=y
 #
 # IDE chipset support/bugfixes
 #
-CONFIG_IDE_GENERIC=y
 # CONFIG_BLK_DEV_PLATFORM is not set
 CONFIG_BLK_DEV_IDEDMA_SFF=y
 
@@ -534,10 +537,8 @@ CONFIG_BLK_DEV_IDEDMA_PCI=y
 # CONFIG_BLK_DEV_AMD74XX is not set
 # CONFIG_BLK_DEV_CMD64X is not set
 # CONFIG_BLK_DEV_TRIFLEX is not set
-# CONFIG_BLK_DEV_CY82C693 is not set
 # CONFIG_BLK_DEV_CS5520 is not set
 # CONFIG_BLK_DEV_CS5530 is not set
-# CONFIG_BLK_DEV_HPT34X is not set
 # CONFIG_BLK_DEV_HPT366 is not set
 # CONFIG_BLK_DEV_JMICRON is not set
 # CONFIG_BLK_DEV_SC1200 is not set
@@ -555,8 +556,6 @@ CONFIG_BLK_DEV_IDEDMA_PCI=y
 CONFIG_BLK_DEV_VIA82CXXX=y
 # CONFIG_BLK_DEV_TC86C001 is not set
 CONFIG_BLK_DEV_IDEDMA=y
-# CONFIG_BLK_DEV_HD_ONLY is not set
-# CONFIG_BLK_DEV_HD is not set
 
 #
 # SCSI device support
@@ -572,12 +571,15 @@ CONFIG_BLK_DEV_IDEDMA=y
 #
 # IEEE 1394 (FireWire) support
 #
+
+#
+# Enable only one of the two stacks, unless you know what you are doing
+#
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -620,10 +622,8 @@ CONFIG_NETDEV_1000=y
 # CONFIG_ACENIC is not set
 # CONFIG_DL2K is not set
 CONFIG_E1000=y
-CONFIG_E1000_NAPI=y
 # CONFIG_E1000_DISABLE_PACKET_SPLIT is not set
 # CONFIG_E1000E is not set
-# CONFIG_E1000E_ENABLED is not set
 # CONFIG_IP1000 is not set
 # CONFIG_IGB is not set
 # CONFIG_NS83820 is not set
@@ -637,9 +637,9 @@ CONFIG_E1000_NAPI=y
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
 CONFIG_GIANFAR=y
-CONFIG_GFAR_NAPI=y
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
+# CONFIG_ATL1E is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
 # CONFIG_CHELSIO_T3 is not set
@@ -744,42 +744,63 @@ CONFIG_DEVPORT=y
 CONFIG_I2C=y
 CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
 
 #
 # I2C Hardware Bus support
 #
+
+#
+# PC SMBus host controller drivers
+#
 # CONFIG_I2C_ALI1535 is not set
 # CONFIG_I2C_ALI1563 is not set
 # CONFIG_I2C_ALI15X3 is not set
 # CONFIG_I2C_AMD756 is not set
 # CONFIG_I2C_AMD8111 is not set
 # CONFIG_I2C_I801 is not set
-# CONFIG_I2C_I810 is not set
+# CONFIG_I2C_ISCH is not set
 # CONFIG_I2C_PIIX4 is not set
-CONFIG_I2C_MPC=y
 # CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_PROSAVAGE is not set
-# CONFIG_I2C_SAVAGE4 is not set
-# CONFIG_I2C_SIMTEC is not set
 # CONFIG_I2C_SIS5595 is not set
 # CONFIG_I2C_SIS630 is not set
 # CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_STUB is not set
 # CONFIG_I2C_VIA is not set
 # CONFIG_I2C_VIAPRO is not set
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+CONFIG_I2C_MPC=y
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+
+#
+# Graphics adapter I2C/DDC channel drivers
+#
 # CONFIG_I2C_VOODOO3 is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
 # CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
 
 #
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
+# CONFIG_AT24 is not set
 # CONFIG_SENSORS_EEPROM is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
@@ -788,10 +809,13 @@ CONFIG_I2C_MPC=y
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
 # CONFIG_SPI is not set
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+# CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 CONFIG_HWMON=y
 # CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_AD7414 is not set
 # CONFIG_SENSORS_AD7418 is not set
 # CONFIG_SENSORS_ADM1021 is not set
 # CONFIG_SENSORS_ADM1025 is not set
@@ -845,6 +869,7 @@ CONFIG_SENSORS_LM75=y
 # CONFIG_SENSORS_W83627EHF is not set
 # CONFIG_HWMON_DEBUG_CHIP is not set
 # CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
 
 #
@@ -856,8 +881,10 @@ CONFIG_SSB_POSSIBLE=y
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
 
 #
 # Multimedia devices
@@ -889,10 +916,6 @@ CONFIG_VIDEO_OUTPUT_CONTROL=y
 # Display device support
 #
 # CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Sound
-#
 # CONFIG_SOUND is not set
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
@@ -907,6 +930,10 @@ CONFIG_USB_ARCH_HAS_EHCI=y
 # CONFIG_USB_OTG_BLACKLIST_HUB is not set
 
 #
+# Enable Host or Gadget support to see Inventra options
+#
+
+#
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
 #
 # CONFIG_USB_GADGET is not set
@@ -945,6 +972,7 @@ CONFIG_RTC_DRV_DS1307=y
 # CONFIG_RTC_DRV_PCF8583 is not set
 # CONFIG_RTC_DRV_M41T80 is not set
 # CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
 
 #
 # SPI RTC drivers
@@ -1031,9 +1059,11 @@ CONFIG_TMPFS=y
 # CONFIG_BFS_FS is not set
 # CONFIG_EFS_FS is not set
 # CONFIG_JFFS2_FS is not set
+# CONFIG_UBIFS_FS is not set
 # CONFIG_CRAMFS is not set
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
 # CONFIG_ROMFS_FS is not set
@@ -1043,12 +1073,11 @@ CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 # CONFIG_NFS_V3 is not set
 # CONFIG_NFS_V4 is not set
-# CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
 CONFIG_LOCKD=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -1084,6 +1113,7 @@ CONFIG_BITREVERSE=y
 # CONFIG_GENERIC_FIND_FIRST_BIT is not set
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
 # CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
@@ -1108,6 +1138,8 @@ CONFIG_FRAME_WARN=1024
 CONFIG_DEBUG_KERNEL=y
 # CONFIG_DEBUG_SHIRQ is not set
 CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
 CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
@@ -1125,17 +1157,29 @@ CONFIG_DEBUG_MUTEXES=y
 # CONFIG_DEBUG_INFO is not set
 # CONFIG_DEBUG_VM is not set
 # CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+# CONFIG_FTRACE is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
 # CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
 # CONFIG_DEBUG_PAGEALLOC is not set
-# CONFIG_DEBUGGER is not set
+# CONFIG_CODE_PATCHING_SELFTEST is not set
+# CONFIG_FTR_FIXUP_SELFTEST is not set
+# CONFIG_XMON is not set
 # CONFIG_IRQSTACKS is not set
 # CONFIG_BDI_SWITCH is not set
 # CONFIG_PPC_EARLY_DEBUG is not set
@@ -1189,6 +1233,10 @@ CONFIG_CRYPTO=y
 # CONFIG_CRYPTO_MD4 is not set
 # CONFIG_CRYPTO_MD5 is not set
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
 # CONFIG_CRYPTO_SHA1 is not set
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
@@ -1221,5 +1269,6 @@ CONFIG_CRYPTO=y
 # CONFIG_CRYPTO_LZO is not set
 CONFIG_CRYPTO_HW=y
 # CONFIG_CRYPTO_DEV_HIFN_795X is not set
+# CONFIG_CRYPTO_DEV_TALITOS is not set
 # CONFIG_PPC_CLOCK is not set
 # CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/85xx/tqm8555_defconfig b/arch/powerpc/configs/85xx/tqm8555_defconfig
index 03120b5b52fa..dcf9cfe28b55 100644
--- a/arch/powerpc/configs/85xx/tqm8555_defconfig
+++ b/arch/powerpc/configs/85xx/tqm8555_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc5
-# Mon Jun  9 08:52:41 2008
+# Linux kernel version: 2.6.27-rc4
+# Thu Aug 21 00:52:42 2008
 #
 # CONFIG_PPC64 is not set
 
@@ -15,6 +15,7 @@ CONFIG_PPC_85xx=y
 # CONFIG_44x is not set
 # CONFIG_E200 is not set
 CONFIG_E500=y
+# CONFIG_PPC_E500MC is not set
 CONFIG_BOOKE=y
 CONFIG_FSL_BOOKE=y
 CONFIG_FSL_EMB_PERFMON=y
@@ -33,12 +34,14 @@ CONFIG_GENERIC_HARDIRQS=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_GENERIC_GPIO=y
 # CONFIG_ARCH_NO_VIRT_TO_BUS is not set
 CONFIG_PPC=y
 CONFIG_EARLY_PRINTK=y
@@ -89,7 +92,6 @@ CONFIG_INITRAMFS_SOURCE=""
 CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
 # CONFIG_KALLSYMS is not set
 # CONFIG_HOTPLUG is not set
 CONFIG_PRINTK=y
@@ -112,10 +114,16 @@ CONFIG_SLUB=y
 # CONFIG_PROFILING is not set
 # CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
+CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
 # CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+CONFIG_HAVE_CLK=y
 CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
@@ -126,6 +134,7 @@ CONFIG_BLOCK=y
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -144,8 +153,6 @@ CONFIG_CLASSIC_RCU=y
 #
 # Platform support
 #
-# CONFIG_PPC_MPC512x is not set
-# CONFIG_PPC_MPC5121 is not set
 # CONFIG_PPC_CELL is not set
 # CONFIG_PPC_CELL_NATIVE is not set
 # CONFIG_PQ2ADS is not set
@@ -154,11 +161,13 @@ CONFIG_MPC85xx=y
 # CONFIG_MPC8560_ADS is not set
 # CONFIG_MPC85xx_CDS is not set
 # CONFIG_MPC85xx_MDS is not set
+# CONFIG_MPC8536_DS is not set
 # CONFIG_MPC85xx_DS is not set
 # CONFIG_KSI8560 is not set
 # CONFIG_STX_GP3 is not set
 # CONFIG_TQM8540 is not set
 # CONFIG_TQM8541 is not set
+# CONFIG_TQM8548 is not set
 CONFIG_TQM8555=y
 # CONFIG_TQM8560 is not set
 # CONFIG_SBC8548 is not set
@@ -176,7 +185,6 @@ CONFIG_MPIC=y
 # CONFIG_GENERIC_IOMAP is not set
 # CONFIG_CPU_FREQ is not set
 CONFIG_CPM2=y
-CONFIG_PPC_CPM_NEW_BINDING=y
 # CONFIG_FSL_ULI1575 is not set
 CONFIG_CPM=y
 
@@ -216,6 +224,7 @@ CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_MIGRATION=y
 # CONFIG_RESOURCES_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
@@ -223,6 +232,7 @@ CONFIG_VIRT_TO_BUS=y
 CONFIG_FORCE_MAX_ZONEORDER=11
 # CONFIG_PROC_DEVICETREE is not set
 # CONFIG_CMDLINE_BOOL is not set
+CONFIG_EXTRA_TARGETS=""
 # CONFIG_PM is not set
 CONFIG_SECCOMP=y
 CONFIG_ISA_DMA_API=y
@@ -234,6 +244,7 @@ CONFIG_ZONE_DMA=y
 CONFIG_PPC_INDIRECT_PCI=y
 CONFIG_FSL_SOC=y
 CONFIG_FSL_PCI=y
+CONFIG_PPC_PCI_CHOICE=y
 CONFIG_PCI=y
 CONFIG_PCI_DOMAINS=y
 CONFIG_PCI_SYSCALL=y
@@ -257,10 +268,6 @@ CONFIG_KERNEL_START=0xc0000000
 CONFIG_PHYSICAL_START=0x00000000
 CONFIG_PHYSICAL_ALIGN=0x10000000
 CONFIG_TASK_SIZE=0xc0000000
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -432,6 +439,7 @@ CONFIG_MTD_CFI_UTIL=y
 #
 # CONFIG_MTD_UBI is not set
 CONFIG_OF_DEVICE=y
+CONFIG_OF_GPIO=y
 CONFIG_OF_I2C=y
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
@@ -451,20 +459,22 @@ CONFIG_BLK_DEV_RAM_SIZE=32768
 # CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_PHANTOM is not set
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_HP_ILO is not set
 CONFIG_HAVE_IDE=y
 CONFIG_IDE=y
-CONFIG_IDE_MAX_HWIFS=4
 CONFIG_BLK_DEV_IDE=y
 
 #
 # Please see Documentation/ide/ide.txt for help/info on IDE drives
 #
+CONFIG_IDE_TIMINGS=y
 # CONFIG_BLK_DEV_IDE_SATA is not set
 CONFIG_BLK_DEV_IDEDISK=y
 # CONFIG_IDEDISK_MULTI_MODE is not set
@@ -477,7 +487,6 @@ CONFIG_IDE_PROC_FS=y
 #
 # IDE chipset support/bugfixes
 #
-CONFIG_IDE_GENERIC=y
 # CONFIG_BLK_DEV_PLATFORM is not set
 CONFIG_BLK_DEV_IDEDMA_SFF=y
 
@@ -495,10 +504,8 @@ CONFIG_BLK_DEV_IDEDMA_PCI=y
 # CONFIG_BLK_DEV_AMD74XX is not set
 # CONFIG_BLK_DEV_CMD64X is not set
 # CONFIG_BLK_DEV_TRIFLEX is not set
-# CONFIG_BLK_DEV_CY82C693 is not set
 # CONFIG_BLK_DEV_CS5520 is not set
 # CONFIG_BLK_DEV_CS5530 is not set
-# CONFIG_BLK_DEV_HPT34X is not set
 # CONFIG_BLK_DEV_HPT366 is not set
 # CONFIG_BLK_DEV_JMICRON is not set
 # CONFIG_BLK_DEV_SC1200 is not set
@@ -516,8 +523,6 @@ CONFIG_BLK_DEV_IDEDMA_PCI=y
 CONFIG_BLK_DEV_VIA82CXXX=y
 # CONFIG_BLK_DEV_TC86C001 is not set
 CONFIG_BLK_DEV_IDEDMA=y
-# CONFIG_BLK_DEV_HD_ONLY is not set
-# CONFIG_BLK_DEV_HD is not set
 
 #
 # SCSI device support
@@ -533,12 +538,15 @@ CONFIG_BLK_DEV_IDEDMA=y
 #
 # IEEE 1394 (FireWire) support
 #
+
+#
+# Enable only one of the two stacks, unless you know what you are doing
+#
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -601,7 +609,6 @@ CONFIG_NETDEV_1000=y
 # CONFIG_DL2K is not set
 # CONFIG_E1000 is not set
 # CONFIG_E1000E is not set
-# CONFIG_E1000E_ENABLED is not set
 # CONFIG_IP1000 is not set
 # CONFIG_IGB is not set
 # CONFIG_NS83820 is not set
@@ -615,9 +622,9 @@ CONFIG_NETDEV_1000=y
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
 CONFIG_GIANFAR=y
-CONFIG_GFAR_NAPI=y
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
+# CONFIG_ATL1E is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
 # CONFIG_CHELSIO_T3 is not set
@@ -732,42 +739,66 @@ CONFIG_DEVPORT=y
 CONFIG_I2C=y
 CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
 
 #
 # I2C Hardware Bus support
 #
+
+#
+# PC SMBus host controller drivers
+#
 # CONFIG_I2C_ALI1535 is not set
 # CONFIG_I2C_ALI1563 is not set
 # CONFIG_I2C_ALI15X3 is not set
 # CONFIG_I2C_AMD756 is not set
 # CONFIG_I2C_AMD8111 is not set
 # CONFIG_I2C_I801 is not set
-# CONFIG_I2C_I810 is not set
+# CONFIG_I2C_ISCH is not set
 # CONFIG_I2C_PIIX4 is not set
-CONFIG_I2C_MPC=y
 # CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_PROSAVAGE is not set
-# CONFIG_I2C_SAVAGE4 is not set
-# CONFIG_I2C_SIMTEC is not set
 # CONFIG_I2C_SIS5595 is not set
 # CONFIG_I2C_SIS630 is not set
 # CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_TAOS_EVM is not set
 # CONFIG_I2C_VIA is not set
 # CONFIG_I2C_VIAPRO is not set
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+# CONFIG_I2C_CPM is not set
+# CONFIG_I2C_GPIO is not set
+CONFIG_I2C_MPC=y
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+
+#
+# Graphics adapter I2C/DDC channel drivers
+#
 # CONFIG_I2C_VOODOO3 is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
 # CONFIG_I2C_PCA_PLATFORM is not set
 
 #
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
+# CONFIG_AT24 is not set
 # CONFIG_SENSORS_EEPROM is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_TPS65010 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
@@ -775,10 +806,31 @@ CONFIG_I2C_MPC=y
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
 # CONFIG_SPI is not set
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_GPIO_SYSFS is not set
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
+
+#
+# PCI GPIO expanders:
+#
+# CONFIG_GPIO_BT8XX is not set
+
+#
+# SPI GPIO expanders:
+#
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 CONFIG_HWMON=y
 # CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_AD7414 is not set
 # CONFIG_SENSORS_AD7418 is not set
 # CONFIG_SENSORS_ADM1021 is not set
 # CONFIG_SENSORS_ADM1025 is not set
@@ -832,6 +884,7 @@ CONFIG_SENSORS_LM75=y
 # CONFIG_SENSORS_W83627EHF is not set
 CONFIG_HWMON_DEBUG_CHIP=y
 # CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
 
 #
@@ -843,8 +896,10 @@ CONFIG_SSB_POSSIBLE=y
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
 
 #
 # Multimedia devices
@@ -876,10 +931,6 @@ CONFIG_DAB=y
 # Display device support
 #
 # CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Sound
-#
 # CONFIG_SOUND is not set
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
@@ -894,6 +945,10 @@ CONFIG_USB_ARCH_HAS_EHCI=y
 # CONFIG_USB_OTG_BLACKLIST_HUB is not set
 
 #
+# Enable Host or Gadget support to see Inventra options
+#
+
+#
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
 #
 # CONFIG_USB_GADGET is not set
@@ -982,6 +1037,7 @@ CONFIG_JFFS2_RTIME=y
 CONFIG_CRAMFS=y
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
 # CONFIG_ROMFS_FS is not set
@@ -991,12 +1047,11 @@ CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 # CONFIG_NFS_V3 is not set
 # CONFIG_NFS_V4 is not set
-# CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
 CONFIG_LOCKD=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -1032,6 +1087,7 @@ CONFIG_BITREVERSE=y
 # CONFIG_GENERIC_FIND_FIRST_BIT is not set
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
 # CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
@@ -1059,8 +1115,16 @@ CONFIG_FRAME_WARN=1024
 # CONFIG_SLUB_DEBUG_ON is not set
 # CONFIG_SLUB_STATS is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+# CONFIG_FTRACE is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
 # CONFIG_SAMPLES is not set
-# CONFIG_KGDB_CONSOLE is not set
+CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_IRQSTACKS is not set
 # CONFIG_PPC_EARLY_DEBUG is not set
 
@@ -1112,6 +1176,10 @@ CONFIG_CRYPTO=y
 # CONFIG_CRYPTO_MD4 is not set
 # CONFIG_CRYPTO_MD5 is not set
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
 # CONFIG_CRYPTO_SHA1 is not set
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
@@ -1144,6 +1212,7 @@ CONFIG_CRYPTO=y
 # CONFIG_CRYPTO_LZO is not set
 CONFIG_CRYPTO_HW=y
 # CONFIG_CRYPTO_DEV_HIFN_795X is not set
-# CONFIG_PPC_CLOCK is not set
+# CONFIG_CRYPTO_DEV_TALITOS is not set
+CONFIG_PPC_CLOCK=y
 CONFIG_PPC_LIB_RHEAP=y
 # CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/85xx/tqm8560_defconfig b/arch/powerpc/configs/85xx/tqm8560_defconfig
index 3113257edf5a..8d676629cdb1 100644
--- a/arch/powerpc/configs/85xx/tqm8560_defconfig
+++ b/arch/powerpc/configs/85xx/tqm8560_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc5
-# Mon Jun  9 08:52:42 2008
+# Linux kernel version: 2.6.27-rc4
+# Thu Aug 21 00:52:43 2008
 #
 # CONFIG_PPC64 is not set
 
@@ -15,6 +15,7 @@ CONFIG_PPC_85xx=y
 # CONFIG_44x is not set
 # CONFIG_E200 is not set
 CONFIG_E500=y
+# CONFIG_PPC_E500MC is not set
 CONFIG_BOOKE=y
 CONFIG_FSL_BOOKE=y
 CONFIG_FSL_EMB_PERFMON=y
@@ -33,12 +34,14 @@ CONFIG_GENERIC_HARDIRQS=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_GENERIC_GPIO=y
 # CONFIG_ARCH_NO_VIRT_TO_BUS is not set
 CONFIG_PPC=y
 CONFIG_EARLY_PRINTK=y
@@ -89,7 +92,6 @@ CONFIG_INITRAMFS_SOURCE=""
 CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
 # CONFIG_KALLSYMS is not set
 # CONFIG_HOTPLUG is not set
 CONFIG_PRINTK=y
@@ -112,10 +114,16 @@ CONFIG_SLUB=y
 # CONFIG_PROFILING is not set
 # CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
+CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
 # CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+CONFIG_HAVE_CLK=y
 CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
@@ -126,6 +134,7 @@ CONFIG_BLOCK=y
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -144,8 +153,6 @@ CONFIG_CLASSIC_RCU=y
 #
 # Platform support
 #
-# CONFIG_PPC_MPC512x is not set
-# CONFIG_PPC_MPC5121 is not set
 # CONFIG_PPC_CELL is not set
 # CONFIG_PPC_CELL_NATIVE is not set
 # CONFIG_PQ2ADS is not set
@@ -154,11 +161,13 @@ CONFIG_MPC85xx=y
 # CONFIG_MPC8560_ADS is not set
 # CONFIG_MPC85xx_CDS is not set
 # CONFIG_MPC85xx_MDS is not set
+# CONFIG_MPC8536_DS is not set
 # CONFIG_MPC85xx_DS is not set
 # CONFIG_KSI8560 is not set
 # CONFIG_STX_GP3 is not set
 # CONFIG_TQM8540 is not set
 # CONFIG_TQM8541 is not set
+# CONFIG_TQM8548 is not set
 # CONFIG_TQM8555 is not set
 CONFIG_TQM8560=y
 # CONFIG_SBC8548 is not set
@@ -176,7 +185,6 @@ CONFIG_MPIC=y
 # CONFIG_GENERIC_IOMAP is not set
 # CONFIG_CPU_FREQ is not set
 CONFIG_CPM2=y
-CONFIG_PPC_CPM_NEW_BINDING=y
 # CONFIG_FSL_ULI1575 is not set
 CONFIG_CPM=y
 
@@ -216,6 +224,7 @@ CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_MIGRATION=y
 # CONFIG_RESOURCES_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
@@ -223,6 +232,7 @@ CONFIG_VIRT_TO_BUS=y
 CONFIG_FORCE_MAX_ZONEORDER=11
 # CONFIG_PROC_DEVICETREE is not set
 # CONFIG_CMDLINE_BOOL is not set
+CONFIG_EXTRA_TARGETS=""
 # CONFIG_PM is not set
 CONFIG_SECCOMP=y
 CONFIG_ISA_DMA_API=y
@@ -234,6 +244,7 @@ CONFIG_ZONE_DMA=y
 CONFIG_PPC_INDIRECT_PCI=y
 CONFIG_FSL_SOC=y
 CONFIG_FSL_PCI=y
+CONFIG_PPC_PCI_CHOICE=y
 CONFIG_PCI=y
 CONFIG_PCI_DOMAINS=y
 CONFIG_PCI_SYSCALL=y
@@ -257,10 +268,6 @@ CONFIG_KERNEL_START=0xc0000000
 CONFIG_PHYSICAL_START=0x00000000
 CONFIG_PHYSICAL_ALIGN=0x10000000
 CONFIG_TASK_SIZE=0xc0000000
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -432,6 +439,7 @@ CONFIG_MTD_CFI_UTIL=y
 #
 # CONFIG_MTD_UBI is not set
 CONFIG_OF_DEVICE=y
+CONFIG_OF_GPIO=y
 CONFIG_OF_I2C=y
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
@@ -451,20 +459,22 @@ CONFIG_BLK_DEV_RAM_SIZE=32768
 # CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_PHANTOM is not set
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_HP_ILO is not set
 CONFIG_HAVE_IDE=y
 CONFIG_IDE=y
-CONFIG_IDE_MAX_HWIFS=4
 CONFIG_BLK_DEV_IDE=y
 
 #
 # Please see Documentation/ide/ide.txt for help/info on IDE drives
 #
+CONFIG_IDE_TIMINGS=y
 # CONFIG_BLK_DEV_IDE_SATA is not set
 CONFIG_BLK_DEV_IDEDISK=y
 # CONFIG_IDEDISK_MULTI_MODE is not set
@@ -477,7 +487,6 @@ CONFIG_IDE_PROC_FS=y
 #
 # IDE chipset support/bugfixes
 #
-CONFIG_IDE_GENERIC=y
 # CONFIG_BLK_DEV_PLATFORM is not set
 CONFIG_BLK_DEV_IDEDMA_SFF=y
 
@@ -495,10 +504,8 @@ CONFIG_BLK_DEV_IDEDMA_PCI=y
 # CONFIG_BLK_DEV_AMD74XX is not set
 # CONFIG_BLK_DEV_CMD64X is not set
 # CONFIG_BLK_DEV_TRIFLEX is not set
-# CONFIG_BLK_DEV_CY82C693 is not set
 # CONFIG_BLK_DEV_CS5520 is not set
 # CONFIG_BLK_DEV_CS5530 is not set
-# CONFIG_BLK_DEV_HPT34X is not set
 # CONFIG_BLK_DEV_HPT366 is not set
 # CONFIG_BLK_DEV_JMICRON is not set
 # CONFIG_BLK_DEV_SC1200 is not set
@@ -516,8 +523,6 @@ CONFIG_BLK_DEV_IDEDMA_PCI=y
 CONFIG_BLK_DEV_VIA82CXXX=y
 # CONFIG_BLK_DEV_TC86C001 is not set
 CONFIG_BLK_DEV_IDEDMA=y
-# CONFIG_BLK_DEV_HD_ONLY is not set
-# CONFIG_BLK_DEV_HD is not set
 
 #
 # SCSI device support
@@ -533,12 +538,15 @@ CONFIG_BLK_DEV_IDEDMA=y
 #
 # IEEE 1394 (FireWire) support
 #
+
+#
+# Enable only one of the two stacks, unless you know what you are doing
+#
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -601,7 +609,6 @@ CONFIG_NETDEV_1000=y
 # CONFIG_DL2K is not set
 # CONFIG_E1000 is not set
 # CONFIG_E1000E is not set
-# CONFIG_E1000E_ENABLED is not set
 # CONFIG_IP1000 is not set
 # CONFIG_IGB is not set
 # CONFIG_NS83820 is not set
@@ -615,9 +622,9 @@ CONFIG_NETDEV_1000=y
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
 CONFIG_GIANFAR=y
-CONFIG_GFAR_NAPI=y
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
+# CONFIG_ATL1E is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
 # CONFIG_CHELSIO_T3 is not set
@@ -732,42 +739,66 @@ CONFIG_DEVPORT=y
 CONFIG_I2C=y
 CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
 
 #
 # I2C Hardware Bus support
 #
+
+#
+# PC SMBus host controller drivers
+#
 # CONFIG_I2C_ALI1535 is not set
 # CONFIG_I2C_ALI1563 is not set
 # CONFIG_I2C_ALI15X3 is not set
 # CONFIG_I2C_AMD756 is not set
 # CONFIG_I2C_AMD8111 is not set
 # CONFIG_I2C_I801 is not set
-# CONFIG_I2C_I810 is not set
+# CONFIG_I2C_ISCH is not set
 # CONFIG_I2C_PIIX4 is not set
-CONFIG_I2C_MPC=y
 # CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_PROSAVAGE is not set
-# CONFIG_I2C_SAVAGE4 is not set
-# CONFIG_I2C_SIMTEC is not set
 # CONFIG_I2C_SIS5595 is not set
 # CONFIG_I2C_SIS630 is not set
 # CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_TAOS_EVM is not set
 # CONFIG_I2C_VIA is not set
 # CONFIG_I2C_VIAPRO is not set
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+# CONFIG_I2C_CPM is not set
+# CONFIG_I2C_GPIO is not set
+CONFIG_I2C_MPC=y
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+
+#
+# Graphics adapter I2C/DDC channel drivers
+#
 # CONFIG_I2C_VOODOO3 is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
 # CONFIG_I2C_PCA_PLATFORM is not set
 
 #
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
+# CONFIG_AT24 is not set
 # CONFIG_SENSORS_EEPROM is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_TPS65010 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
@@ -775,10 +806,31 @@ CONFIG_I2C_MPC=y
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
 # CONFIG_SPI is not set
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_GPIO_SYSFS is not set
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
+
+#
+# PCI GPIO expanders:
+#
+# CONFIG_GPIO_BT8XX is not set
+
+#
+# SPI GPIO expanders:
+#
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 CONFIG_HWMON=y
 # CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_AD7414 is not set
 # CONFIG_SENSORS_AD7418 is not set
 # CONFIG_SENSORS_ADM1021 is not set
 # CONFIG_SENSORS_ADM1025 is not set
@@ -832,6 +884,7 @@ CONFIG_SENSORS_LM75=y
 # CONFIG_SENSORS_W83627EHF is not set
 CONFIG_HWMON_DEBUG_CHIP=y
 # CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
 
 #
@@ -843,8 +896,10 @@ CONFIG_SSB_POSSIBLE=y
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
 
 #
 # Multimedia devices
@@ -876,10 +931,6 @@ CONFIG_DAB=y
 # Display device support
 #
 # CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Sound
-#
 # CONFIG_SOUND is not set
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
@@ -894,6 +945,10 @@ CONFIG_USB_ARCH_HAS_EHCI=y
 # CONFIG_USB_OTG_BLACKLIST_HUB is not set
 
 #
+# Enable Host or Gadget support to see Inventra options
+#
+
+#
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
 #
 # CONFIG_USB_GADGET is not set
@@ -982,6 +1037,7 @@ CONFIG_JFFS2_RTIME=y
 CONFIG_CRAMFS=y
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
 # CONFIG_ROMFS_FS is not set
@@ -991,12 +1047,11 @@ CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 # CONFIG_NFS_V3 is not set
 # CONFIG_NFS_V4 is not set
-# CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
 CONFIG_LOCKD=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -1032,6 +1087,7 @@ CONFIG_BITREVERSE=y
 # CONFIG_GENERIC_FIND_FIRST_BIT is not set
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
 # CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
@@ -1059,8 +1115,16 @@ CONFIG_FRAME_WARN=1024
 # CONFIG_SLUB_DEBUG_ON is not set
 # CONFIG_SLUB_STATS is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+# CONFIG_FTRACE is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
 # CONFIG_SAMPLES is not set
-# CONFIG_KGDB_CONSOLE is not set
+CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_IRQSTACKS is not set
 # CONFIG_PPC_EARLY_DEBUG is not set
 
@@ -1112,6 +1176,10 @@ CONFIG_CRYPTO=y
 # CONFIG_CRYPTO_MD4 is not set
 # CONFIG_CRYPTO_MD5 is not set
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
 # CONFIG_CRYPTO_SHA1 is not set
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
@@ -1144,6 +1212,7 @@ CONFIG_CRYPTO=y
 # CONFIG_CRYPTO_LZO is not set
 CONFIG_CRYPTO_HW=y
 # CONFIG_CRYPTO_DEV_HIFN_795X is not set
-# CONFIG_PPC_CLOCK is not set
+# CONFIG_CRYPTO_DEV_TALITOS is not set
+CONFIG_PPC_CLOCK=y
 CONFIG_PPC_LIB_RHEAP=y
 # CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/adder875_defconfig b/arch/powerpc/configs/adder875_defconfig
index 6740f2a3aa3d..63cd51fbb4b9 100644
--- a/arch/powerpc/configs/adder875_defconfig
+++ b/arch/powerpc/configs/adder875_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc5
-# Mon Jun  9 08:52:08 2008
+# Linux kernel version: 2.6.27-rc4
+# Thu Aug 21 00:52:00 2008
 #
 # CONFIG_PPC64 is not set
 
@@ -29,6 +29,7 @@ CONFIG_GENERIC_HARDIRQS=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
@@ -109,10 +110,16 @@ CONFIG_SLUB=y
 # CONFIG_PROFILING is not set
 # CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
+CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
 # CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+CONFIG_HAVE_CLK=y
 CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=1
@@ -122,6 +129,7 @@ CONFIG_BLOCK=y
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -140,8 +148,6 @@ CONFIG_CLASSIC_RCU=y
 #
 # Platform support
 #
-# CONFIG_PPC_MPC512x is not set
-# CONFIG_PPC_MPC5121 is not set
 # CONFIG_PPC_CELL is not set
 # CONFIG_PPC_CELL_NATIVE is not set
 CONFIG_CPM1=y
@@ -159,6 +165,7 @@ CONFIG_PPC_ADDER875=y
 # Generic MPC8xx Options
 #
 CONFIG_8xx_COPYBACK=y
+# CONFIG_8xx_GPIO is not set
 # CONFIG_8xx_CPU6 is not set
 CONFIG_8xx_CPU15=y
 CONFIG_NO_UCODE_PATCH=y
@@ -177,7 +184,6 @@ CONFIG_NO_UCODE_PATCH=y
 # CONFIG_PPC_INDIRECT_IO is not set
 # CONFIG_GENERIC_IOMAP is not set
 # CONFIG_CPU_FREQ is not set
-CONFIG_PPC_CPM_NEW_BINDING=y
 # CONFIG_FSL_ULI1575 is not set
 CONFIG_CPM=y
 
@@ -218,6 +224,7 @@ CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_MIGRATION=y
 # CONFIG_RESOURCES_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
@@ -225,6 +232,7 @@ CONFIG_VIRT_TO_BUS=y
 CONFIG_FORCE_MAX_ZONEORDER=11
 # CONFIG_PROC_DEVICETREE is not set
 # CONFIG_CMDLINE_BOOL is not set
+CONFIG_EXTRA_TARGETS=""
 # CONFIG_PM is not set
 # CONFIG_SECCOMP is not set
 CONFIG_ISA_DMA_API=y
@@ -257,10 +265,6 @@ CONFIG_PHYSICAL_START=0x00000000
 CONFIG_TASK_SIZE=0x80000000
 CONFIG_CONSISTENT_START=0xfd000000
 CONFIG_CONSISTENT_SIZE=0x00200000
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -443,7 +447,6 @@ CONFIG_HAVE_IDE=y
 # CONFIG_MD is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -547,6 +550,7 @@ CONFIG_SERIO_I8042=y
 CONFIG_SERIO_SERPORT=y
 CONFIG_SERIO_LIBPS2=y
 # CONFIG_SERIO_RAW is not set
+# CONFIG_SERIO_XILINX_XPS_PS2 is not set
 # CONFIG_GAMEPORT is not set
 
 #
@@ -587,6 +591,8 @@ CONFIG_GEN_RTC=y
 # CONFIG_TCG_TPM is not set
 # CONFIG_I2C is not set
 # CONFIG_SPI is not set
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+# CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
@@ -602,8 +608,10 @@ CONFIG_SSB_POSSIBLE=y
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
 
 #
 # Multimedia devices
@@ -633,10 +641,6 @@ CONFIG_VIDEO_OUTPUT_CONTROL=y
 # Display device support
 #
 # CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Sound
-#
 # CONFIG_SOUND is not set
 # CONFIG_HID_SUPPORT is not set
 # CONFIG_USB_SUPPORT is not set
@@ -706,6 +710,7 @@ CONFIG_TMPFS=y
 CONFIG_CRAMFS=y
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
 # CONFIG_ROMFS_FS is not set
@@ -716,13 +721,12 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 # CONFIG_NFS_V4 is not set
-# CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -761,6 +765,7 @@ CONFIG_MSDOS_PARTITION=y
 # CONFIG_GENERIC_FIND_FIRST_BIT is not set
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
 # CONFIG_CRC_ITU_T is not set
 # CONFIG_CRC32 is not set
 # CONFIG_CRC7 is not set
@@ -785,6 +790,8 @@ CONFIG_DEBUG_FS=y
 CONFIG_DEBUG_KERNEL=y
 # CONFIG_DEBUG_SHIRQ is not set
 CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
 CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
@@ -800,16 +807,28 @@ CONFIG_DEBUG_BUGVERBOSE=y
 CONFIG_DEBUG_INFO=y
 # CONFIG_DEBUG_VM is not set
 # CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+# CONFIG_FTRACE is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
 # CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
 # CONFIG_DEBUG_PAGEALLOC is not set
-# CONFIG_DEBUGGER is not set
+# CONFIG_CODE_PATCHING_SELFTEST is not set
+# CONFIG_FTR_FIXUP_SELFTEST is not set
+# CONFIG_XMON is not set
 # CONFIG_IRQSTACKS is not set
 # CONFIG_VIRQ_DEBUG is not set
 # CONFIG_BDI_SWITCH is not set
@@ -822,6 +841,6 @@ CONFIG_DEBUG_INFO=y
 # CONFIG_SECURITY is not set
 # CONFIG_SECURITY_FILE_CAPABILITIES is not set
 # CONFIG_CRYPTO is not set
-# CONFIG_PPC_CLOCK is not set
+CONFIG_PPC_CLOCK=y
 CONFIG_PPC_LIB_RHEAP=y
 # CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/c2k_defconfig b/arch/powerpc/configs/c2k_defconfig
index dc599c7e97d5..c16521ffb477 100644
--- a/arch/powerpc/configs/c2k_defconfig
+++ b/arch/powerpc/configs/c2k_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc2
-# Thu May 15 11:00:14 2008
+# Linux kernel version: 2.6.27-rc4
+# Thu Aug 21 00:52:02 2008
 #
 # CONFIG_PPC64 is not set
 
@@ -34,6 +34,7 @@ CONFIG_GENERIC_HARDIRQS=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
@@ -97,7 +98,6 @@ CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 CONFIG_SYSCTL=y
 # CONFIG_EMBEDDED is not set
 CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
 CONFIG_KALLSYMS_EXTRA_PASS=y
@@ -124,11 +124,17 @@ CONFIG_PROFILING=y
 CONFIG_OPROFILE=m
 CONFIG_HAVE_OPROFILE=y
 CONFIG_KPROBES=y
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
 CONFIG_KRETPROBES=y
+CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
 # CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+# CONFIG_HAVE_CLK is not set
 CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
@@ -145,6 +151,7 @@ CONFIG_LBD=y
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -164,19 +171,18 @@ CONFIG_CLASSIC_RCU=y
 # Platform support
 #
 CONFIG_PPC_MULTIPLATFORM=y
-# CONFIG_PPC_82xx is not set
-# CONFIG_PPC_83xx is not set
-# CONFIG_PPC_86xx is not set
 CONFIG_CLASSIC32=y
 # CONFIG_PPC_CHRP is not set
-# CONFIG_PPC_MPC512x is not set
-# CONFIG_PPC_MPC5121 is not set
 # CONFIG_MPC5121_ADS is not set
+# CONFIG_MPC5121_GENERIC is not set
 # CONFIG_PPC_MPC52xx is not set
 # CONFIG_PPC_PMAC is not set
 # CONFIG_PPC_CELL is not set
 # CONFIG_PPC_CELL_NATIVE is not set
+# CONFIG_PPC_82xx is not set
 # CONFIG_PQ2ADS is not set
+# CONFIG_PPC_83xx is not set
+# CONFIG_PPC_86xx is not set
 CONFIG_EMBEDDED6xx=y
 # CONFIG_LINKSTATION is not set
 # CONFIG_STORCENTER is not set
@@ -253,6 +259,7 @@ CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_MIGRATION=y
 # CONFIG_RESOURCES_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
@@ -260,6 +267,7 @@ CONFIG_VIRT_TO_BUS=y
 CONFIG_FORCE_MAX_ZONEORDER=11
 # CONFIG_PROC_DEVICETREE is not set
 # CONFIG_CMDLINE_BOOL is not set
+CONFIG_EXTRA_TARGETS=""
 CONFIG_PM=y
 # CONFIG_PM_DEBUG is not set
 CONFIG_SECCOMP=y
@@ -301,10 +309,6 @@ CONFIG_PHYSICAL_START=0x00000000
 CONFIG_TASK_SIZE=0xc0000000
 CONFIG_CONSISTENT_START=0xff100000
 CONFIG_CONSISTENT_SIZE=0x00200000
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -318,6 +322,7 @@ CONFIG_XFRM_USER=y
 # CONFIG_XFRM_SUB_POLICY is not set
 # CONFIG_XFRM_MIGRATE is not set
 # CONFIG_XFRM_STATISTICS is not set
+CONFIG_XFRM_IPCOMP=m
 CONFIG_NET_KEY=m
 # CONFIG_NET_KEY_MIGRATE is not set
 CONFIG_INET=y
@@ -349,7 +354,7 @@ CONFIG_INET_TUNNEL=m
 CONFIG_INET_XFRM_MODE_TRANSPORT=y
 CONFIG_INET_XFRM_MODE_TUNNEL=y
 CONFIG_INET_XFRM_MODE_BEET=y
-# CONFIG_INET_LRO is not set
+CONFIG_INET_LRO=m
 CONFIG_INET_DIAG=y
 CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
@@ -472,6 +477,7 @@ CONFIG_IP_NF_MANGLE=m
 CONFIG_IP_NF_TARGET_ECN=m
 # CONFIG_IP_NF_TARGET_TTL is not set
 CONFIG_IP_NF_RAW=m
+# CONFIG_IP_NF_SECURITY is not set
 CONFIG_IP_NF_ARPTABLES=m
 CONFIG_IP_NF_ARPFILTER=m
 CONFIG_IP_NF_ARP_MANGLE=m
@@ -495,6 +501,7 @@ CONFIG_IP6_NF_TARGET_LOG=m
 CONFIG_IP6_NF_MANGLE=m
 # CONFIG_IP6_NF_TARGET_HL is not set
 CONFIG_IP6_NF_RAW=m
+# CONFIG_IP6_NF_SECURITY is not set
 
 #
 # Bridge: Netfilter Configuration
@@ -507,6 +514,7 @@ CONFIG_BRIDGE_EBT_802_3=m
 CONFIG_BRIDGE_EBT_AMONG=m
 CONFIG_BRIDGE_EBT_ARP=m
 CONFIG_BRIDGE_EBT_IP=m
+# CONFIG_BRIDGE_EBT_IP6 is not set
 CONFIG_BRIDGE_EBT_LIMIT=m
 CONFIG_BRIDGE_EBT_MARK=m
 CONFIG_BRIDGE_EBT_PKTTYPE=m
@@ -535,8 +543,10 @@ CONFIG_ATM_LANE=m
 # CONFIG_ATM_MPOA is not set
 CONFIG_ATM_BR2684=m
 # CONFIG_ATM_BR2684_IPFILTER is not set
+CONFIG_STP=m
 CONFIG_BRIDGE=m
 CONFIG_VLAN_8021Q=m
+# CONFIG_VLAN_8021Q_GVRP is not set
 # CONFIG_DECNET is not set
 CONFIG_LLC=m
 # CONFIG_LLC2 is not set
@@ -556,7 +566,6 @@ CONFIG_NET_SCH_HTB=m
 CONFIG_NET_SCH_HFSC=m
 CONFIG_NET_SCH_ATM=m
 CONFIG_NET_SCH_PRIO=m
-# CONFIG_NET_SCH_RR is not set
 CONFIG_NET_SCH_RED=m
 CONFIG_NET_SCH_SFQ=m
 CONFIG_NET_SCH_TEQL=m
@@ -601,7 +610,6 @@ CONFIG_BT_RFCOMM_TTY=y
 CONFIG_BT_BNEP=m
 CONFIG_BT_BNEP_MC_FILTER=y
 CONFIG_BT_BNEP_PROTO_FILTER=y
-CONFIG_BT_CMTP=m
 CONFIG_BT_HIDP=m
 
 #
@@ -609,6 +617,7 @@ CONFIG_BT_HIDP=m
 #
 CONFIG_BT_HCIUSB=m
 CONFIG_BT_HCIUSB_SCO=y
+# CONFIG_BT_HCIBTUSB is not set
 CONFIG_BT_HCIUART=m
 CONFIG_BT_HCIUART_H4=y
 CONFIG_BT_HCIUART_BCSP=y
@@ -625,6 +634,7 @@ CONFIG_FIB_RULES=y
 #
 # CONFIG_CFG80211 is not set
 CONFIG_WIRELESS_EXT=y
+CONFIG_WIRELESS_EXT_SYSFS=y
 # CONFIG_MAC80211 is not set
 CONFIG_IEEE80211=m
 # CONFIG_IEEE80211_DEBUG is not set
@@ -645,6 +655,8 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_DEBUG_DRIVER is not set
 # CONFIG_DEBUG_DEVRES is not set
 # CONFIG_SYS_HYPERVISOR is not set
@@ -749,6 +761,7 @@ CONFIG_BLK_DEV_RAM_SIZE=16384
 # CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
 # CONFIG_MISC_DEVICES is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
@@ -844,6 +857,7 @@ CONFIG_SCSI_LPFC=m
 # CONFIG_SCSI_NSP32 is not set
 # CONFIG_SCSI_DEBUG is not set
 # CONFIG_SCSI_SRP is not set
+# CONFIG_SCSI_DH is not set
 # CONFIG_ATA is not set
 # CONFIG_MD is not set
 # CONFIG_FUSION is not set
@@ -851,12 +865,15 @@ CONFIG_SCSI_LPFC=m
 #
 # IEEE 1394 (FireWire) support
 #
+
+#
+# Enable only one of the two stacks, unless you know what you are doing
+#
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 CONFIG_DUMMY=m
 CONFIG_BONDING=m
 # CONFIG_MACVLAN is not set
@@ -900,7 +917,6 @@ CONFIG_NETDEV_1000=y
 # CONFIG_DL2K is not set
 # CONFIG_E1000 is not set
 # CONFIG_E1000E is not set
-# CONFIG_E1000E_ENABLED is not set
 # CONFIG_IP1000 is not set
 # CONFIG_IGB is not set
 # CONFIG_NS83820 is not set
@@ -916,6 +932,7 @@ CONFIG_NETDEV_1000=y
 CONFIG_MV643XX_ETH=y
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
+# CONFIG_ATL1E is not set
 # CONFIG_NETDEV_10000 is not set
 # CONFIG_TR is not set
 
@@ -940,112 +957,13 @@ CONFIG_MV643XX_ETH=y
 # CONFIG_HIPPI is not set
 # CONFIG_PPP is not set
 # CONFIG_SLIP is not set
-CONFIG_SLHC=m
 # CONFIG_NET_FC is not set
 CONFIG_NETCONSOLE=m
 # CONFIG_NETCONSOLE_DYNAMIC is not set
 CONFIG_NETPOLL=y
 CONFIG_NETPOLL_TRAP=y
 CONFIG_NET_POLL_CONTROLLER=y
-CONFIG_ISDN=m
-CONFIG_ISDN_I4L=m
-CONFIG_ISDN_PPP=y
-CONFIG_ISDN_PPP_VJ=y
-CONFIG_ISDN_MPP=y
-CONFIG_IPPP_FILTER=y
-# CONFIG_ISDN_PPP_BSDCOMP is not set
-CONFIG_ISDN_AUDIO=y
-CONFIG_ISDN_TTY_FAX=y
-
-#
-# ISDN feature submodules
-#
-CONFIG_ISDN_DRV_LOOP=m
-# CONFIG_ISDN_DIVERSION is not set
-
-#
-# ISDN4Linux hardware drivers
-#
-
-#
-# Passive cards
-#
-CONFIG_ISDN_DRV_HISAX=m
-
-#
-# D-channel protocol features
-#
-CONFIG_HISAX_EURO=y
-CONFIG_DE_AOC=y
-CONFIG_HISAX_NO_SENDCOMPLETE=y
-CONFIG_HISAX_NO_LLC=y
-CONFIG_HISAX_NO_KEYPAD=y
-CONFIG_HISAX_1TR6=y
-CONFIG_HISAX_NI1=y
-CONFIG_HISAX_MAX_CARDS=8
-
-#
-# HiSax supported cards
-#
-CONFIG_HISAX_16_3=y
-CONFIG_HISAX_S0BOX=y
-CONFIG_HISAX_FRITZPCI=y
-CONFIG_HISAX_AVM_A1_PCMCIA=y
-CONFIG_HISAX_ELSA=y
-CONFIG_HISAX_DIEHLDIVA=y
-CONFIG_HISAX_SEDLBAUER=y
-CONFIG_HISAX_NICCY=y
-CONFIG_HISAX_BKM_A4T=y
-CONFIG_HISAX_SCT_QUADRO=y
-CONFIG_HISAX_GAZEL=y
-CONFIG_HISAX_W6692=y
-CONFIG_HISAX_HFC_SX=y
-# CONFIG_HISAX_DEBUG is not set
-
-#
-# HiSax PCMCIA card service modules
-#
-
-#
-# HiSax sub driver modules
-#
-CONFIG_HISAX_ST5481=m
-CONFIG_HISAX_HFCUSB=m
-# CONFIG_HISAX_HFC4S8S is not set
-CONFIG_HISAX_FRITZ_PCIPNP=m
-CONFIG_HISAX_HDLC=y
-
-#
-# Active cards
-#
-CONFIG_HYSDN=m
-CONFIG_HYSDN_CAPI=y
-# CONFIG_ISDN_DRV_GIGASET is not set
-CONFIG_ISDN_CAPI=m
-CONFIG_ISDN_DRV_AVMB1_VERBOSE_REASON=y
-CONFIG_CAPI_TRACE=y
-CONFIG_ISDN_CAPI_MIDDLEWARE=y
-CONFIG_ISDN_CAPI_CAPI20=m
-CONFIG_ISDN_CAPI_CAPIFS_BOOL=y
-CONFIG_ISDN_CAPI_CAPIFS=m
-CONFIG_ISDN_CAPI_CAPIDRV=m
-
-#
-# CAPI hardware drivers
-#
-CONFIG_CAPI_AVM=y
-CONFIG_ISDN_DRV_AVMB1_B1PCI=m
-CONFIG_ISDN_DRV_AVMB1_B1PCIV4=y
-CONFIG_ISDN_DRV_AVMB1_B1PCMCIA=m
-CONFIG_ISDN_DRV_AVMB1_T1PCI=m
-CONFIG_ISDN_DRV_AVMB1_C4=m
-CONFIG_CAPI_EICON=y
-CONFIG_ISDN_DIVAS=m
-CONFIG_ISDN_DIVAS_BRIPCI=y
-CONFIG_ISDN_DIVAS_PRIPCI=y
-CONFIG_ISDN_DIVAS_DIVACAPI=m
-CONFIG_ISDN_DIVAS_USERIDI=m
-CONFIG_ISDN_DIVAS_MAINT=m
+# CONFIG_ISDN is not set
 # CONFIG_PHONE is not set
 
 #
@@ -1092,6 +1010,7 @@ CONFIG_INPUT_UINPUT=m
 # Character devices
 #
 CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
 # CONFIG_VT_HW_CONSOLE_BINDING is not set
@@ -1145,44 +1064,65 @@ CONFIG_DEVPORT=y
 CONFIG_I2C=m
 CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=m
+CONFIG_I2C_HELPER_AUTO=y
 
 #
 # I2C Hardware Bus support
 #
+
+#
+# PC SMBus host controller drivers
+#
 # CONFIG_I2C_ALI1535 is not set
 # CONFIG_I2C_ALI1563 is not set
 # CONFIG_I2C_ALI15X3 is not set
 # CONFIG_I2C_AMD756 is not set
 # CONFIG_I2C_AMD8111 is not set
 # CONFIG_I2C_I801 is not set
-# CONFIG_I2C_I810 is not set
+# CONFIG_I2C_ISCH is not set
 # CONFIG_I2C_PIIX4 is not set
-# CONFIG_I2C_MPC is not set
 # CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_PROSAVAGE is not set
-# CONFIG_I2C_SAVAGE4 is not set
-# CONFIG_I2C_SIMTEC is not set
 # CONFIG_I2C_SIS5595 is not set
 # CONFIG_I2C_SIS630 is not set
 # CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_TINY_USB is not set
 # CONFIG_I2C_VIA is not set
 # CONFIG_I2C_VIAPRO is not set
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+# CONFIG_I2C_MPC is not set
+CONFIG_I2C_MV64XXX=m
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Graphics adapter I2C/DDC channel drivers
+#
 # CONFIG_I2C_VOODOO3 is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
 # CONFIG_I2C_PCA_PLATFORM is not set
-CONFIG_I2C_MV64XXX=m
+# CONFIG_I2C_STUB is not set
 
 #
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
+# CONFIG_AT24 is not set
 CONFIG_SENSORS_EEPROM=m
 CONFIG_SENSORS_PCF8574=m
 # CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
 CONFIG_SENSORS_PCF8591=m
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
@@ -1191,10 +1131,13 @@ CONFIG_SENSORS_PCF8591=m
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
 # CONFIG_SPI is not set
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+# CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 CONFIG_HWMON=m
 CONFIG_HWMON_VID=m
+# CONFIG_SENSORS_AD7414 is not set
 # CONFIG_SENSORS_AD7418 is not set
 CONFIG_SENSORS_ADM1021=m
 CONFIG_SENSORS_ADM1025=m
@@ -1255,6 +1198,7 @@ CONFIG_WATCHDOG=y
 # Watchdog Device Drivers
 #
 CONFIG_SOFT_WATCHDOG=m
+# CONFIG_ALIM7101_WDT is not set
 # CONFIG_MV64X60_WDT is not set
 
 #
@@ -1278,8 +1222,10 @@ CONFIG_SSB_POSSIBLE=y
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
 
 #
 # Multimedia devices
@@ -1290,6 +1236,7 @@ CONFIG_SSB_POSSIBLE=y
 #
 # CONFIG_VIDEO_DEV is not set
 # CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
 
 #
 # Multimedia drivers
@@ -1316,10 +1263,6 @@ CONFIG_SSB_POSSIBLE=y
 #
 # CONFIG_VGA_CONSOLE is not set
 CONFIG_DUMMY_CONSOLE=y
-
-#
-# Sound
-#
 # CONFIG_SOUND is not set
 # CONFIG_HID_SUPPORT is not set
 CONFIG_HID=m
@@ -1339,6 +1282,7 @@ CONFIG_USB_DEVICEFS=y
 # CONFIG_USB_DYNAMIC_MINORS is not set
 CONFIG_USB_SUSPEND=y
 # CONFIG_USB_OTG is not set
+CONFIG_USB_MON=y
 
 #
 # USB Host Controller Drivers
@@ -1363,10 +1307,15 @@ CONFIG_USB_UHCI_HCD=m
 # CONFIG_USB_R8A66597_HCD is not set
 
 #
+# Enable Host or Gadget support to see Inventra options
+#
+
+#
 # USB Device Class drivers
 #
 CONFIG_USB_ACM=m
 CONFIG_USB_PRINTER=m
+# CONFIG_USB_WDM is not set
 
 #
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
@@ -1388,6 +1337,7 @@ CONFIG_USB_STORAGE_JUMPSHOT=y
 # CONFIG_USB_STORAGE_ALAUDA is not set
 # CONFIG_USB_STORAGE_ONETOUCH is not set
 # CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_SIERRA is not set
 # CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
 # CONFIG_USB_LIBUSUAL is not set
 
@@ -1396,7 +1346,6 @@ CONFIG_USB_STORAGE_JUMPSHOT=y
 #
 CONFIG_USB_MDC800=m
 CONFIG_USB_MICROTEK=m
-CONFIG_USB_MON=y
 
 #
 # USB port drivers
@@ -1405,7 +1354,6 @@ CONFIG_USB_SERIAL=m
 CONFIG_USB_EZUSB=y
 CONFIG_USB_SERIAL_GENERIC=y
 # CONFIG_USB_SERIAL_AIRCABLE is not set
-# CONFIG_USB_SERIAL_AIRPRIME is not set
 # CONFIG_USB_SERIAL_ARK3116 is not set
 CONFIG_USB_SERIAL_BELKIN=m
 # CONFIG_USB_SERIAL_CH341 is not set
@@ -1443,6 +1391,7 @@ CONFIG_USB_SERIAL_KOBIL_SCT=m
 CONFIG_USB_SERIAL_MCT_U232=m
 # CONFIG_USB_SERIAL_MOS7720 is not set
 # CONFIG_USB_SERIAL_MOS7840 is not set
+# CONFIG_USB_SERIAL_MOTOROLA is not set
 # CONFIG_USB_SERIAL_NAVMAN is not set
 CONFIG_USB_SERIAL_PL2303=m
 # CONFIG_USB_SERIAL_OTI6858 is not set
@@ -1464,7 +1413,6 @@ CONFIG_USB_SERIAL_OMNINET=m
 CONFIG_USB_EMI62=m
 # CONFIG_USB_EMI26 is not set
 # CONFIG_USB_ADUTUX is not set
-CONFIG_USB_AUERSWALD=m
 CONFIG_USB_RIO500=m
 CONFIG_USB_LEGOTOWER=m
 CONFIG_USB_LCD=m
@@ -1481,6 +1429,7 @@ CONFIG_USB_LED=m
 # CONFIG_USB_TRANCEVIBRATOR is not set
 # CONFIG_USB_IOWARRIOR is not set
 CONFIG_USB_TEST=m
+# CONFIG_USB_ISIGHTFW is not set
 CONFIG_USB_ATM=m
 CONFIG_USB_SPEEDTOUCH=m
 # CONFIG_USB_CXACRU is not set
@@ -1601,6 +1550,7 @@ CONFIG_JFFS2_RTIME=y
 CONFIG_CRAMFS=m
 CONFIG_VXFS_FS=m
 # CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
 # CONFIG_ROMFS_FS is not set
@@ -1611,8 +1561,8 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 CONFIG_NFS_V3_ACL=y
 CONFIG_NFS_V4=y
-# CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_NFS_ACL_SUPPORT=y
@@ -1620,7 +1570,6 @@ CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 CONFIG_SUNRPC_GSS=y
 CONFIG_SUNRPC_XPRT_RDMA=m
-# CONFIG_SUNRPC_BIND34 is not set
 CONFIG_RPCSEC_GSS_KRB5=y
 CONFIG_RPCSEC_GSS_SPKM3=m
 # CONFIG_SMB_FS is not set
@@ -1705,6 +1654,7 @@ CONFIG_BITREVERSE=y
 # CONFIG_GENERIC_FIND_FIRST_BIT is not set
 CONFIG_CRC_CCITT=m
 # CONFIG_CRC16 is not set
+CONFIG_CRC_T10DIF=m
 CONFIG_CRC_ITU_T=m
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
@@ -1732,6 +1682,8 @@ CONFIG_MAGIC_SYSRQ=y
 CONFIG_DEBUG_KERNEL=y
 # CONFIG_DEBUG_SHIRQ is not set
 CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
 CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
@@ -1750,6 +1702,7 @@ CONFIG_DEBUG_BUGVERBOSE=y
 CONFIG_DEBUG_INFO=y
 # CONFIG_DEBUG_VM is not set
 # CONFIG_DEBUG_WRITECOUNT is not set
+CONFIG_DEBUG_MEMORY_INIT=y
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_BOOT_PRINTK_DELAY is not set
@@ -1758,11 +1711,22 @@ CONFIG_DEBUG_INFO=y
 # CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_LKDTM is not set
 # CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+# CONFIG_FTRACE is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
 # CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
 CONFIG_DEBUG_STACKOVERFLOW=y
 CONFIG_DEBUG_STACK_USAGE=y
 # CONFIG_DEBUG_PAGEALLOC is not set
-# CONFIG_DEBUGGER is not set
+# CONFIG_CODE_PATCHING_SELFTEST is not set
+# CONFIG_FTR_FIXUP_SELFTEST is not set
+# CONFIG_XMON is not set
 # CONFIG_IRQSTACKS is not set
 # CONFIG_BDI_SWITCH is not set
 CONFIG_BOOTX_TEXT=y
@@ -1776,7 +1740,6 @@ CONFIG_KEYS_DEBUG_PROC_KEYS=y
 CONFIG_SECURITY=y
 CONFIG_SECURITY_NETWORK=y
 # CONFIG_SECURITY_NETWORK_XFRM is not set
-CONFIG_SECURITY_CAPABILITIES=y
 # CONFIG_SECURITY_FILE_CAPABILITIES is not set
 CONFIG_SECURITY_DEFAULT_MMAP_MIN_ADDR=0
 CONFIG_SECURITY_SELINUX=y
@@ -1835,6 +1798,10 @@ CONFIG_CRYPTO_CRC32C=m
 CONFIG_CRYPTO_MD4=m
 CONFIG_CRYPTO_MD5=y
 CONFIG_CRYPTO_MICHAEL_MIC=m
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
 CONFIG_CRYPTO_SHA1=y
 CONFIG_CRYPTO_SHA256=m
 CONFIG_CRYPTO_SHA512=m
diff --git a/arch/powerpc/configs/chrp32_defconfig b/arch/powerpc/configs/chrp32_defconfig
index 05360d4ef1b1..2e0ef8c18227 100644
--- a/arch/powerpc/configs/chrp32_defconfig
+++ b/arch/powerpc/configs/chrp32_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc3
-# Tue May 20 20:00:44 2008
+# Linux kernel version: 2.6.27-rc4
+# Tue Aug 26 13:12:40 2008
 #
 # CONFIG_PPC64 is not set
 
@@ -33,6 +33,7 @@ CONFIG_GENERIC_HARDIRQS=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
@@ -90,7 +91,6 @@ CONFIG_INITRAMFS_SOURCE=""
 CONFIG_SYSCTL=y
 # CONFIG_EMBEDDED is not set
 CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
@@ -117,10 +117,16 @@ CONFIG_SLUB=y
 # CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
+CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
 # CONFIG_HAVE_DMA_ATTRS is not set
+CONFIG_USE_GENERIC_SMP_HELPERS=y
+# CONFIG_HAVE_CLK is not set
 CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
@@ -138,6 +144,7 @@ CONFIG_LBD=y
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -157,19 +164,18 @@ CONFIG_CLASSIC_RCU=y
 # Platform support
 #
 CONFIG_PPC_MULTIPLATFORM=y
-# CONFIG_PPC_82xx is not set
-# CONFIG_PPC_83xx is not set
-# CONFIG_PPC_86xx is not set
 CONFIG_CLASSIC32=y
 CONFIG_PPC_CHRP=y
-# CONFIG_PPC_MPC512x is not set
-# CONFIG_PPC_MPC5121 is not set
 # CONFIG_MPC5121_ADS is not set
+# CONFIG_MPC5121_GENERIC is not set
 # CONFIG_PPC_MPC52xx is not set
 # CONFIG_PPC_PMAC is not set
 # CONFIG_PPC_CELL is not set
 # CONFIG_PPC_CELL_NATIVE is not set
+# CONFIG_PPC_82xx is not set
 # CONFIG_PQ2ADS is not set
+# CONFIG_PPC_83xx is not set
+# CONFIG_PPC_86xx is not set
 CONFIG_PPC_NATIVE=y
 # CONFIG_UDBG_RTAS_CONSOLE is not set
 # CONFIG_IPIC is not set
@@ -201,7 +207,7 @@ CONFIG_HZ_250=y
 # CONFIG_HZ_300 is not set
 # CONFIG_HZ_1000 is not set
 CONFIG_HZ=250
-# CONFIG_SCHED_HRTICK is not set
+CONFIG_SCHED_HRTICK=y
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
@@ -225,6 +231,7 @@ CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_MIGRATION is not set
 # CONFIG_RESOURCES_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
@@ -232,6 +239,7 @@ CONFIG_VIRT_TO_BUS=y
 CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
+CONFIG_EXTRA_TARGETS=""
 # CONFIG_PM is not set
 CONFIG_SECCOMP=y
 CONFIG_ISA_DMA_API=y
@@ -268,10 +276,6 @@ CONFIG_PAGE_OFFSET=0xc0000000
 CONFIG_KERNEL_START=0xc0000000
 CONFIG_PHYSICAL_START=0x00000000
 CONFIG_TASK_SIZE=0xc0000000
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -398,7 +402,9 @@ CONFIG_NF_NAT_SIP=m
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 # CONFIG_STANDALONE is not set
 CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
+CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_DEBUG_DRIVER is not set
 # CONFIG_DEBUG_DEVRES is not set
 # CONFIG_SYS_HYPERVISOR is not set
@@ -427,12 +433,14 @@ CONFIG_BLK_DEV_RAM_SIZE=4096
 # CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_PHANTOM is not set
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_HP_ILO is not set
 CONFIG_HAVE_IDE=y
 CONFIG_IDE=y
 CONFIG_BLK_DEV_IDE=y
@@ -440,6 +448,7 @@ CONFIG_BLK_DEV_IDE=y
 #
 # Please see Documentation/ide/ide.txt for help/info on IDE drives
 #
+CONFIG_IDE_TIMINGS=y
 # CONFIG_BLK_DEV_IDE_SATA is not set
 CONFIG_BLK_DEV_IDEDISK=y
 CONFIG_IDEDISK_MULTI_MODE=y
@@ -454,7 +463,6 @@ CONFIG_IDE_PROC_FS=y
 #
 # IDE chipset support/bugfixes
 #
-CONFIG_IDE_GENERIC=y
 # CONFIG_BLK_DEV_PLATFORM is not set
 CONFIG_BLK_DEV_IDEDMA_SFF=y
 
@@ -472,10 +480,8 @@ CONFIG_BLK_DEV_IDEDMA_PCI=y
 # CONFIG_BLK_DEV_AMD74XX is not set
 # CONFIG_BLK_DEV_CMD64X is not set
 # CONFIG_BLK_DEV_TRIFLEX is not set
-# CONFIG_BLK_DEV_CY82C693 is not set
 # CONFIG_BLK_DEV_CS5520 is not set
 # CONFIG_BLK_DEV_CS5530 is not set
-# CONFIG_BLK_DEV_HPT34X is not set
 # CONFIG_BLK_DEV_HPT366 is not set
 # CONFIG_BLK_DEV_JMICRON is not set
 # CONFIG_BLK_DEV_SC1200 is not set
@@ -493,8 +499,6 @@ CONFIG_BLK_DEV_SL82C105=y
 CONFIG_BLK_DEV_VIA82CXXX=y
 # CONFIG_BLK_DEV_TC86C001 is not set
 CONFIG_BLK_DEV_IDEDMA=y
-# CONFIG_BLK_DEV_HD_ONLY is not set
-# CONFIG_BLK_DEV_HD is not set
 
 #
 # SCSI device support
@@ -588,6 +592,7 @@ CONFIG_SCSI_SYM53C8XX_MMIO=y
 # CONFIG_SCSI_NSP32 is not set
 # CONFIG_SCSI_DEBUG is not set
 # CONFIG_SCSI_SRP is not set
+# CONFIG_SCSI_DH is not set
 # CONFIG_ATA is not set
 # CONFIG_MD is not set
 # CONFIG_FUSION is not set
@@ -595,12 +600,15 @@ CONFIG_SCSI_SYM53C8XX_MMIO=y
 #
 # IEEE 1394 (FireWire) support
 #
+
+#
+# Enable only one of the two stacks, unless you know what you are doing
+#
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -660,14 +668,12 @@ CONFIG_8139TOO=y
 # CONFIG_TLAN is not set
 CONFIG_VIA_RHINE=y
 # CONFIG_VIA_RHINE_MMIO is not set
-# CONFIG_VIA_RHINE_NAPI is not set
 # CONFIG_SC92031 is not set
 CONFIG_NETDEV_1000=y
 # CONFIG_ACENIC is not set
 # CONFIG_DL2K is not set
 # CONFIG_E1000 is not set
 # CONFIG_E1000E is not set
-# CONFIG_E1000E_ENABLED is not set
 # CONFIG_IP1000 is not set
 # CONFIG_IGB is not set
 # CONFIG_NS83820 is not set
@@ -683,6 +689,7 @@ CONFIG_NETDEV_1000=y
 CONFIG_MV643XX_ETH=y
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
+# CONFIG_ATL1E is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
 # CONFIG_CHELSIO_T3 is not set
@@ -773,6 +780,7 @@ CONFIG_MOUSE_PS2_TRACKPOINT=y
 # CONFIG_MOUSE_PS2_TOUCHKIT is not set
 # CONFIG_MOUSE_SERIAL is not set
 # CONFIG_MOUSE_APPLETOUCH is not set
+# CONFIG_MOUSE_BCM5974 is not set
 # CONFIG_MOUSE_INPORT is not set
 # CONFIG_MOUSE_LOGIBM is not set
 # CONFIG_MOUSE_PC110PAD is not set
@@ -798,12 +806,14 @@ CONFIG_SERIO_SERPORT=y
 # CONFIG_SERIO_PCIPS2 is not set
 CONFIG_SERIO_LIBPS2=y
 # CONFIG_SERIO_RAW is not set
+# CONFIG_SERIO_XILINX_XPS_PS2 is not set
 # CONFIG_GAMEPORT is not set
 
 #
 # Character devices
 #
 CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
 # CONFIG_VT_HW_CONSOLE_BINDING is not set
@@ -848,46 +858,71 @@ CONFIG_DEVPORT=y
 CONFIG_I2C=y
 CONFIG_I2C_BOARDINFO=y
 # CONFIG_I2C_CHARDEV is not set
+CONFIG_I2C_HELPER_AUTO=y
 CONFIG_I2C_ALGOBIT=y
 
 #
 # I2C Hardware Bus support
 #
+
+#
+# PC SMBus host controller drivers
+#
 # CONFIG_I2C_ALI1535 is not set
 # CONFIG_I2C_ALI1563 is not set
 # CONFIG_I2C_ALI15X3 is not set
 # CONFIG_I2C_AMD756 is not set
 # CONFIG_I2C_AMD8111 is not set
-# CONFIG_I2C_HYDRA is not set
 # CONFIG_I2C_I801 is not set
-# CONFIG_I2C_I810 is not set
+# CONFIG_I2C_ISCH is not set
 # CONFIG_I2C_PIIX4 is not set
-# CONFIG_I2C_MPC is not set
 # CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_PROSAVAGE is not set
-# CONFIG_I2C_SAVAGE4 is not set
-# CONFIG_I2C_SIMTEC is not set
 # CONFIG_I2C_SIS5595 is not set
 # CONFIG_I2C_SIS630 is not set
 # CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_TINY_USB is not set
 # CONFIG_I2C_VIA is not set
 # CONFIG_I2C_VIAPRO is not set
+
+#
+# Mac SMBus host controller drivers
+#
+# CONFIG_I2C_HYDRA is not set
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+# CONFIG_I2C_MPC is not set
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Graphics adapter I2C/DDC channel drivers
+#
 # CONFIG_I2C_VOODOO3 is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
 # CONFIG_I2C_PCA_ISA is not set
 # CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
 
 #
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
+# CONFIG_AT24 is not set
 # CONFIG_SENSORS_EEPROM is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
@@ -896,10 +931,13 @@ CONFIG_I2C_ALGOBIT=y
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
 # CONFIG_SPI is not set
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+# CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 # CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
 
 #
@@ -911,8 +949,10 @@ CONFIG_SSB_POSSIBLE=y
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
 
 #
 # Multimedia devices
@@ -997,10 +1037,13 @@ CONFIG_FB_3DFX=y
 # CONFIG_FB_TRIDENT is not set
 # CONFIG_FB_ARK is not set
 # CONFIG_FB_PM3 is not set
+# CONFIG_FB_CARMINE is not set
 # CONFIG_FB_IBM_GXT4500 is not set
 # CONFIG_FB_VIRTUAL is not set
 CONFIG_BACKLIGHT_LCD_SUPPORT=y
 CONFIG_LCD_CLASS_DEVICE=m
+# CONFIG_LCD_ILI9320 is not set
+# CONFIG_LCD_PLATFORM is not set
 CONFIG_BACKLIGHT_CLASS_DEVICE=y
 # CONFIG_BACKLIGHT_CORGI is not set
 
@@ -1030,10 +1073,6 @@ CONFIG_LOGO=y
 CONFIG_LOGO_LINUX_MONO=y
 CONFIG_LOGO_LINUX_VGA16=y
 CONFIG_LOGO_LINUX_CLUT224=y
-
-#
-# Sound
-#
 # CONFIG_SOUND is not set
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
@@ -1062,6 +1101,7 @@ CONFIG_USB_DEVICEFS=y
 CONFIG_USB_DEVICE_CLASS=y
 # CONFIG_USB_DYNAMIC_MINORS is not set
 # CONFIG_USB_OTG is not set
+CONFIG_USB_MON=y
 
 #
 # USB Host Controller Drivers
@@ -1087,6 +1127,7 @@ CONFIG_USB_UHCI_HCD=y
 #
 # CONFIG_USB_ACM is not set
 # CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
 
 #
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
@@ -1108,6 +1149,7 @@ CONFIG_USB_STORAGE=m
 # CONFIG_USB_STORAGE_ALAUDA is not set
 # CONFIG_USB_STORAGE_ONETOUCH is not set
 # CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_SIERRA is not set
 # CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
 # CONFIG_USB_LIBUSUAL is not set
 
@@ -1116,7 +1158,6 @@ CONFIG_USB_STORAGE=m
 #
 # CONFIG_USB_MDC800 is not set
 # CONFIG_USB_MICROTEK is not set
-CONFIG_USB_MON=y
 
 #
 # USB port drivers
@@ -1129,7 +1170,6 @@ CONFIG_USB_MON=y
 # CONFIG_USB_EMI62 is not set
 # CONFIG_USB_EMI26 is not set
 # CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_AUERSWALD is not set
 # CONFIG_USB_RIO500 is not set
 # CONFIG_USB_LEGOTOWER is not set
 # CONFIG_USB_LCD is not set
@@ -1146,6 +1186,7 @@ CONFIG_USB_MON=y
 # CONFIG_USB_TRANCEVIBRATOR is not set
 # CONFIG_USB_IOWARRIOR is not set
 # CONFIG_USB_TEST is not set
+# CONFIG_USB_ISIGHTFW is not set
 # CONFIG_USB_GADGET is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
@@ -1226,6 +1267,7 @@ CONFIG_TMPFS=y
 # CONFIG_CRAMFS is not set
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
 # CONFIG_ROMFS_FS is not set
@@ -1310,6 +1352,7 @@ CONFIG_BITREVERSE=y
 # CONFIG_GENERIC_FIND_FIRST_BIT is not set
 CONFIG_CRC_CCITT=m
 # CONFIG_CRC16 is not set
+CONFIG_CRC_T10DIF=y
 # CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
@@ -1336,6 +1379,8 @@ CONFIG_MAGIC_SYSRQ=y
 CONFIG_DEBUG_KERNEL=y
 # CONFIG_DEBUG_SHIRQ is not set
 CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
 CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
@@ -1354,20 +1399,32 @@ CONFIG_DEBUG_BUGVERBOSE=y
 # CONFIG_DEBUG_INFO is not set
 # CONFIG_DEBUG_VM is not set
 # CONFIG_DEBUG_WRITECOUNT is not set
+CONFIG_DEBUG_MEMORY_INIT=y
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+# CONFIG_FTRACE is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
 # CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
 # CONFIG_DEBUG_PAGEALLOC is not set
-CONFIG_DEBUGGER=y
+# CONFIG_CODE_PATCHING_SELFTEST is not set
+# CONFIG_FTR_FIXUP_SELFTEST is not set
 CONFIG_XMON=y
 CONFIG_XMON_DEFAULT=y
 CONFIG_XMON_DISASSEMBLY=y
+CONFIG_DEBUGGER=y
 CONFIG_IRQSTACKS=y
 # CONFIG_BDI_SWITCH is not set
 # CONFIG_BOOTX_TEXT is not set
@@ -1424,6 +1481,10 @@ CONFIG_CRYPTO_PCBC=m
 # CONFIG_CRYPTO_MD4 is not set
 # CONFIG_CRYPTO_MD5 is not set
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
 CONFIG_CRYPTO_SHA1=m
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
diff --git a/arch/powerpc/configs/ep8248e_defconfig b/arch/powerpc/configs/ep8248e_defconfig
index ba2a463b9305..ef0c6e800508 100644
--- a/arch/powerpc/configs/ep8248e_defconfig
+++ b/arch/powerpc/configs/ep8248e_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc5
-# Mon Jun  9 08:52:09 2008
+# Linux kernel version: 2.6.27-rc4
+# Thu Aug 21 00:52:03 2008
 #
 # CONFIG_PPC64 is not set
 
@@ -15,6 +15,7 @@ CONFIG_6xx=y
 # CONFIG_44x is not set
 # CONFIG_E200 is not set
 CONFIG_PPC_FPU=y
+# CONFIG_ALTIVEC is not set
 CONFIG_PPC_STD_MMU=y
 CONFIG_PPC_STD_MMU_32=y
 # CONFIG_PPC_MM_SLICES is not set
@@ -31,12 +32,14 @@ CONFIG_GENERIC_HARDIRQS=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_GENERIC_GPIO=y
 # CONFIG_ARCH_NO_VIRT_TO_BUS is not set
 CONFIG_PPC=y
 CONFIG_EARLY_PRINTK=y
@@ -45,11 +48,13 @@ CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
 CONFIG_ARCH_MAY_HAVE_PC_FDC=y
 CONFIG_PPC_OF=y
 CONFIG_OF=y
-# CONFIG_PPC_UDBG_16550 is not set
+CONFIG_PPC_UDBG_16550=y
 # CONFIG_GENERIC_TBSYNC is not set
 CONFIG_AUDIT_ARCH=y
 CONFIG_GENERIC_BUG=y
 # CONFIG_DEFAULT_UIMAGE is not set
+CONFIG_HIBERNATE_32=y
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
@@ -81,7 +86,6 @@ CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
@@ -89,6 +93,7 @@ CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
+CONFIG_PCSPKR_PLATFORM=y
 CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
@@ -105,10 +110,16 @@ CONFIG_SLAB=y
 # CONFIG_PROFILING is not set
 # CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
+CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
 # CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+CONFIG_HAVE_CLK=y
 CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
@@ -118,6 +129,7 @@ CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -136,33 +148,43 @@ CONFIG_CLASSIC_RCU=y
 #
 # Platform support
 #
-# CONFIG_PPC_MULTIPLATFORM is not set
-CONFIG_PPC_82xx=y
-# CONFIG_PPC_83xx is not set
-# CONFIG_PPC_86xx is not set
-# CONFIG_PPC_MPC512x is not set
-# CONFIG_PPC_MPC5121 is not set
+CONFIG_PPC_MULTIPLATFORM=y
+CONFIG_CLASSIC32=y
+CONFIG_PPC_CHRP=y
+# CONFIG_MPC5121_ADS is not set
+# CONFIG_MPC5121_GENERIC is not set
+# CONFIG_PPC_MPC52xx is not set
+CONFIG_PPC_PMAC=y
 # CONFIG_PPC_CELL is not set
 # CONFIG_PPC_CELL_NATIVE is not set
+CONFIG_PPC_82xx=y
 # CONFIG_MPC8272_ADS is not set
 # CONFIG_PQ2FADS is not set
 CONFIG_EP8248E=y
 # CONFIG_PQ2ADS is not set
 CONFIG_8260=y
 CONFIG_8272=y
+# CONFIG_PPC_83xx is not set
+# CONFIG_PPC_86xx is not set
+# CONFIG_EMBEDDED6xx is not set
+CONFIG_PPC_NATIVE=y
+# CONFIG_UDBG_RTAS_CONSOLE is not set
 # CONFIG_IPIC is not set
-# CONFIG_MPIC is not set
+CONFIG_MPIC=y
 # CONFIG_MPIC_WEIRD is not set
-# CONFIG_PPC_I8259 is not set
-# CONFIG_PPC_RTAS is not set
+CONFIG_PPC_I8259=y
+CONFIG_PPC_RTAS=y
+# CONFIG_RTAS_ERROR_LOGGING is not set
+CONFIG_RTAS_PROC=y
 # CONFIG_MMIO_NVRAM is not set
-# CONFIG_PPC_MPC106 is not set
+CONFIG_PPC_MPC106=y
 # CONFIG_PPC_970_NAP is not set
 # CONFIG_PPC_INDIRECT_IO is not set
 # CONFIG_GENERIC_IOMAP is not set
 # CONFIG_CPU_FREQ is not set
+# CONFIG_PPC601_SYNC_FIX is not set
+# CONFIG_TAU is not set
 CONFIG_CPM2=y
-CONFIG_PPC_CPM_NEW_BINDING=y
 # CONFIG_FSL_ULI1575 is not set
 CONFIG_CPM=y
 
@@ -197,6 +219,7 @@ CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_MIGRATION=y
 # CONFIG_RESOURCES_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
@@ -204,6 +227,7 @@ CONFIG_VIRT_TO_BUS=y
 CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
+CONFIG_EXTRA_TARGETS=""
 # CONFIG_PM is not set
 # CONFIG_SECCOMP is not set
 CONFIG_ISA_DMA_API=y
@@ -211,13 +235,22 @@ CONFIG_ISA_DMA_API=y
 #
 # Bus options
 #
+# CONFIG_ISA is not set
 CONFIG_ZONE_DMA=y
+CONFIG_PPC_INDIRECT_PCI=y
 CONFIG_FSL_SOC=y
-# CONFIG_PCI is not set
-# CONFIG_PCI_DOMAINS is not set
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
+CONFIG_PPC_PCI_CHOICE=y
+CONFIG_PCI=y
+CONFIG_PCI_DOMAINS=y
+CONFIG_PCI_SYSCALL=y
+CONFIG_PCI_8260=y
+# CONFIG_PCIEPORTBUS is not set
+CONFIG_ARCH_SUPPORTS_MSI=y
+# CONFIG_PCI_MSI is not set
+CONFIG_PCI_LEGACY=y
+# CONFIG_PCI_DEBUG is not set
 # CONFIG_PCCARD is not set
+# CONFIG_HOTPLUG_PCI is not set
 # CONFIG_HAS_RAPIDIO is not set
 
 #
@@ -233,10 +266,6 @@ CONFIG_PAGE_OFFSET=0xc0000000
 CONFIG_KERNEL_START=0xc0000000
 CONFIG_PHYSICAL_START=0x00000000
 CONFIG_TASK_SIZE=0xc0000000
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -410,11 +439,13 @@ CONFIG_MTD_CFI_UTIL=y
 # CONFIG_MTD_COMPLEX_MAPPINGS is not set
 # CONFIG_MTD_PHYSMAP is not set
 CONFIG_MTD_PHYSMAP_OF=y
+# CONFIG_MTD_INTEL_VR_NOR is not set
 # CONFIG_MTD_PLATRAM is not set
 
 #
 # Self-contained MTD device drivers
 #
+# CONFIG_MTD_PMC551 is not set
 # CONFIG_MTD_SLRAM is not set
 # CONFIG_MTD_PHRAM is not set
 # CONFIG_MTD_MTDRAM is not set
@@ -434,16 +465,23 @@ CONFIG_MTD_PHYSMAP_OF=y
 #
 # CONFIG_MTD_UBI is not set
 CONFIG_OF_DEVICE=y
+CONFIG_OF_GPIO=y
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_FD is not set
+# CONFIG_MAC_FLOPPY is not set
+# CONFIG_BLK_CPQ_DA is not set
+# CONFIG_BLK_CPQ_CISS_DA is not set
+# CONFIG_BLK_DEV_DAC960 is not set
 # CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
 # CONFIG_BLK_DEV_CRYPTOLOOP is not set
 # CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_SX8 is not set
 # CONFIG_BLK_DEV_RAM is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
 # CONFIG_MISC_DEVICES is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
@@ -457,14 +495,25 @@ CONFIG_HAVE_IDE=y
 # CONFIG_SCSI_NETLINK is not set
 # CONFIG_ATA is not set
 # CONFIG_MD is not set
+# CONFIG_FUSION is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+
+#
+# A new alternative FireWire stack is available with EXPERIMENTAL=y
+#
+# CONFIG_IEEE1394 is not set
+# CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_EQUALIZER is not set
 # CONFIG_TUN is not set
 # CONFIG_VETH is not set
+# CONFIG_ARCNET is not set
 CONFIG_PHYLIB=y
 
 #
@@ -482,21 +531,59 @@ CONFIG_DAVICOM_PHY=y
 # CONFIG_REALTEK_PHY is not set
 # CONFIG_FIXED_PHY is not set
 CONFIG_MDIO_BITBANG=y
+# CONFIG_MDIO_OF_GPIO is not set
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
+# CONFIG_MACE is not set
+# CONFIG_BMAC is not set
+# CONFIG_HAPPYMEAL is not set
+# CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
+# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_NET_TULIP is not set
+# CONFIG_HP100 is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
 # CONFIG_IBM_NEW_EMAC_RGMII is not set
 # CONFIG_IBM_NEW_EMAC_TAH is not set
 # CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_NET_PCI is not set
 # CONFIG_B44 is not set
 CONFIG_FS_ENET=y
 # CONFIG_FS_ENET_HAS_SCC is not set
 CONFIG_FS_ENET_HAS_FCC=y
 # CONFIG_FS_ENET_MDIO_FCC is not set
 CONFIG_NETDEV_1000=y
-# CONFIG_E1000E_ENABLED is not set
+# CONFIG_ACENIC is not set
+# CONFIG_DL2K is not set
+# CONFIG_E1000 is not set
+# CONFIG_E1000E is not set
+# CONFIG_IGB is not set
+# CONFIG_NS83820 is not set
+# CONFIG_HAMACHI is not set
+# CONFIG_R8169 is not set
+# CONFIG_SIS190 is not set
+# CONFIG_SKGE is not set
+# CONFIG_SKY2 is not set
+# CONFIG_VIA_VELOCITY is not set
+# CONFIG_TIGON3 is not set
+# CONFIG_BNX2 is not set
 # CONFIG_GIANFAR is not set
+# CONFIG_MV643XX_ETH is not set
+# CONFIG_QLA3XXX is not set
 CONFIG_NETDEV_10000=y
+# CONFIG_CHELSIO_T1 is not set
+# CONFIG_CHELSIO_T3 is not set
+# CONFIG_IXGBE is not set
+# CONFIG_IXGB is not set
+# CONFIG_S2IO is not set
+# CONFIG_MYRI10GE is not set
+# CONFIG_NETXEN_NIC is not set
+# CONFIG_NIU is not set
+# CONFIG_MLX4_CORE is not set
+# CONFIG_TEHUTI is not set
+# CONFIG_BNX2X is not set
+# CONFIG_SFC is not set
+# CONFIG_TR is not set
 
 #
 # Wireless LAN
@@ -505,6 +592,7 @@ CONFIG_NETDEV_10000=y
 # CONFIG_WLAN_80211 is not set
 # CONFIG_IWLWIFI_LEDS is not set
 # CONFIG_WAN is not set
+# CONFIG_FDDI is not set
 # CONFIG_PPP is not set
 # CONFIG_SLIP is not set
 # CONFIG_NETPOLL is not set
@@ -541,6 +629,7 @@ CONFIG_DEVKMEM=y
 # CONFIG_SERIAL_UARTLITE is not set
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_PMACZILOG is not set
 CONFIG_SERIAL_CPM=y
 CONFIG_SERIAL_CPM_CONSOLE=y
 CONFIG_SERIAL_CPM_SCC1=y
@@ -549,21 +638,44 @@ CONFIG_SERIAL_CPM_SCC1=y
 CONFIG_SERIAL_CPM_SCC4=y
 # CONFIG_SERIAL_CPM_SMC1 is not set
 # CONFIG_SERIAL_CPM_SMC2 is not set
+# CONFIG_SERIAL_JSM is not set
 CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_BRIQ_PANEL is not set
+# CONFIG_HVC_RTAS is not set
 # CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
 # CONFIG_NVRAM is not set
 # CONFIG_GEN_RTC is not set
 # CONFIG_R3964 is not set
+# CONFIG_APPLICOM is not set
 # CONFIG_RAW_DRIVER is not set
+CONFIG_DEVPORT=y
 # CONFIG_I2C is not set
 # CONFIG_SPI is not set
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+
+#
+# I2C GPIO expanders:
+#
+
+#
+# PCI GPIO expanders:
+#
+# CONFIG_GPIO_BT8XX is not set
+
+#
+# SPI GPIO expanders:
+#
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 # CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
 
 #
@@ -575,8 +687,10 @@ CONFIG_SSB_POSSIBLE=y
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
 
 #
 # Multimedia devices
@@ -597,6 +711,8 @@ CONFIG_DAB=y
 #
 # Graphics support
 #
+# CONFIG_AGP is not set
+# CONFIG_DRM is not set
 # CONFIG_VGASTATE is not set
 # CONFIG_VIDEO_OUTPUT_CONTROL is not set
 # CONFIG_FB is not set
@@ -606,16 +722,13 @@ CONFIG_DAB=y
 # Display device support
 #
 # CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Sound
-#
 # CONFIG_SOUND is not set
 # CONFIG_USB_SUPPORT is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
 # CONFIG_ACCESSIBILITY is not set
+# CONFIG_INFINIBAND is not set
 # CONFIG_RTC_CLASS is not set
 # CONFIG_DMADEVICES is not set
 # CONFIG_UIO is not set
@@ -675,6 +788,7 @@ CONFIG_TMPFS=y
 CONFIG_CRAMFS=y
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
 # CONFIG_ROMFS_FS is not set
@@ -684,8 +798,8 @@ CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_NFS_COMMON=y
@@ -763,6 +877,7 @@ CONFIG_NLS_UTF8=y
 # CONFIG_GENERIC_FIND_FIRST_BIT is not set
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
 # CONFIG_CRC_ITU_T is not set
 # CONFIG_CRC32 is not set
 # CONFIG_CRC7 is not set
@@ -804,19 +919,31 @@ CONFIG_DEBUG_BUGVERBOSE=y
 CONFIG_DEBUG_INFO=y
 # CONFIG_DEBUG_VM is not set
 # CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+# CONFIG_FTRACE is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
 # CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
 # CONFIG_DEBUG_PAGEALLOC is not set
-# CONFIG_DEBUGGER is not set
-# CONFIG_KGDB_CONSOLE is not set
+# CONFIG_CODE_PATCHING_SELFTEST is not set
+# CONFIG_FTR_FIXUP_SELFTEST is not set
+# CONFIG_XMON is not set
 # CONFIG_IRQSTACKS is not set
 CONFIG_BDI_SWITCH=y
+# CONFIG_BOOTX_TEXT is not set
 # CONFIG_PPC_EARLY_DEBUG is not set
 
 #
@@ -824,6 +951,7 @@ CONFIG_BDI_SWITCH=y
 #
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
 CONFIG_CRYPTO=y
 
 #
@@ -864,6 +992,10 @@ CONFIG_CRYPTO_PCBC=y
 # CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=y
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
 # CONFIG_CRYPTO_SHA1 is not set
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
@@ -894,6 +1026,6 @@ CONFIG_CRYPTO_DES=y
 # CONFIG_CRYPTO_DEFLATE is not set
 # CONFIG_CRYPTO_LZO is not set
 # CONFIG_CRYPTO_HW is not set
-# CONFIG_PPC_CLOCK is not set
+CONFIG_PPC_CLOCK=y
 CONFIG_PPC_LIB_RHEAP=y
 # CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/ep88xc_defconfig b/arch/powerpc/configs/ep88xc_defconfig
index ac72b48542dc..480225be2f39 100644
--- a/arch/powerpc/configs/ep88xc_defconfig
+++ b/arch/powerpc/configs/ep88xc_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc5
-# Mon Jun  9 08:52:09 2008
+# Linux kernel version: 2.6.27-rc4
+# Thu Aug 21 00:52:04 2008
 #
 # CONFIG_PPC64 is not set
 
@@ -29,6 +29,7 @@ CONFIG_GENERIC_HARDIRQS=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
@@ -108,10 +109,16 @@ CONFIG_SLUB=y
 # CONFIG_PROFILING is not set
 # CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
+CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
 # CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+CONFIG_HAVE_CLK=y
 CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=1
@@ -121,6 +128,7 @@ CONFIG_BLOCK=y
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -139,8 +147,6 @@ CONFIG_CLASSIC_RCU=y
 #
 # Platform support
 #
-# CONFIG_PPC_MPC512x is not set
-# CONFIG_PPC_MPC5121 is not set
 # CONFIG_PPC_CELL is not set
 # CONFIG_PPC_CELL_NATIVE is not set
 CONFIG_CPM1=y
@@ -158,6 +164,7 @@ CONFIG_PPC_EP88XC=y
 # Generic MPC8xx Options
 #
 CONFIG_8xx_COPYBACK=y
+# CONFIG_8xx_GPIO is not set
 # CONFIG_8xx_CPU6 is not set
 CONFIG_8xx_CPU15=y
 CONFIG_NO_UCODE_PATCH=y
@@ -176,7 +183,6 @@ CONFIG_NO_UCODE_PATCH=y
 # CONFIG_PPC_INDIRECT_IO is not set
 # CONFIG_GENERIC_IOMAP is not set
 # CONFIG_CPU_FREQ is not set
-CONFIG_PPC_CPM_NEW_BINDING=y
 # CONFIG_FSL_ULI1575 is not set
 CONFIG_CPM=y
 
@@ -193,7 +199,7 @@ CONFIG_HZ_100=y
 # CONFIG_HZ_300 is not set
 # CONFIG_HZ_1000 is not set
 CONFIG_HZ=100
-# CONFIG_SCHED_HRTICK is not set
+CONFIG_SCHED_HRTICK=y
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
@@ -217,6 +223,7 @@ CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_MIGRATION=y
 # CONFIG_RESOURCES_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
@@ -224,6 +231,7 @@ CONFIG_VIRT_TO_BUS=y
 CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
+CONFIG_EXTRA_TARGETS=""
 # CONFIG_PM is not set
 # CONFIG_SECCOMP is not set
 CONFIG_ISA_DMA_API=y
@@ -256,10 +264,6 @@ CONFIG_PHYSICAL_START=0x00000000
 CONFIG_TASK_SIZE=0x80000000
 CONFIG_CONSISTENT_START=0xfd000000
 CONFIG_CONSISTENT_SIZE=0x00200000
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -442,7 +446,6 @@ CONFIG_HAVE_IDE=y
 # CONFIG_MD is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -544,10 +547,13 @@ CONFIG_GEN_RTC=y
 # CONFIG_TCG_TPM is not set
 # CONFIG_I2C is not set
 # CONFIG_SPI is not set
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+# CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 # CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
 
 #
@@ -559,8 +565,10 @@ CONFIG_SSB_POSSIBLE=y
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
 
 #
 # Multimedia devices
@@ -590,10 +598,6 @@ CONFIG_DAB=y
 # Display device support
 #
 # CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Sound
-#
 # CONFIG_SOUND is not set
 # CONFIG_USB_SUPPORT is not set
 # CONFIG_MMC is not set
@@ -662,6 +666,7 @@ CONFIG_TMPFS=y
 CONFIG_CRAMFS=y
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
 # CONFIG_ROMFS_FS is not set
@@ -672,13 +677,12 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 # CONFIG_NFS_V4 is not set
-# CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -717,6 +721,7 @@ CONFIG_MSDOS_PARTITION=y
 # CONFIG_GENERIC_FIND_FIRST_BIT is not set
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
 # CONFIG_CRC_ITU_T is not set
 # CONFIG_CRC32 is not set
 # CONFIG_CRC7 is not set
@@ -741,6 +746,8 @@ CONFIG_MAGIC_SYSRQ=y
 CONFIG_DEBUG_KERNEL=y
 # CONFIG_DEBUG_SHIRQ is not set
 CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
 CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
@@ -756,16 +763,28 @@ CONFIG_DEBUG_BUGVERBOSE=y
 CONFIG_DEBUG_INFO=y
 # CONFIG_DEBUG_VM is not set
 # CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+# CONFIG_FTRACE is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
 # CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
 # CONFIG_DEBUG_PAGEALLOC is not set
-# CONFIG_DEBUGGER is not set
+# CONFIG_CODE_PATCHING_SELFTEST is not set
+# CONFIG_FTR_FIXUP_SELFTEST is not set
+# CONFIG_XMON is not set
 # CONFIG_IRQSTACKS is not set
 # CONFIG_BDI_SWITCH is not set
 # CONFIG_PPC_EARLY_DEBUG is not set
@@ -777,6 +796,6 @@ CONFIG_DEBUG_INFO=y
 # CONFIG_SECURITY is not set
 # CONFIG_SECURITY_FILE_CAPABILITIES is not set
 # CONFIG_CRYPTO is not set
-# CONFIG_PPC_CLOCK is not set
+CONFIG_PPC_CLOCK=y
 CONFIG_PPC_LIB_RHEAP=y
 # CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/g5_defconfig b/arch/powerpc/configs/g5_defconfig
index 0ccc6e493dcb..cfa5d053ee5e 100644
--- a/arch/powerpc/configs/g5_defconfig
+++ b/arch/powerpc/configs/g5_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc6
-# Mon Jun 16 21:08:31 2008
+# Linux kernel version: 2.6.27-rc4
+# Tue Aug 26 13:15:06 2008
 #
 CONFIG_PPC64=y
 
@@ -13,6 +13,7 @@ CONFIG_POWER4=y
 # CONFIG_TUNE_CELL is not set
 CONFIG_PPC_FPU=y
 CONFIG_ALTIVEC=y
+# CONFIG_VSX is not set
 CONFIG_PPC_STD_MMU=y
 CONFIG_PPC_MM_SLICES=y
 CONFIG_VIRT_CPU_ACCOUNTING=y
@@ -30,6 +31,7 @@ CONFIG_GENERIC_HARDIRQS=y
 CONFIG_HAVE_SETUP_PER_CPU_AREA=y
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
 CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
@@ -94,9 +96,8 @@ CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 CONFIG_SYSCTL=y
 # CONFIG_EMBEDDED is not set
 CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
+CONFIG_KALLSYMS_ALL=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
@@ -121,10 +122,16 @@ CONFIG_PROFILING=y
 CONFIG_OPROFILE=y
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
+CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
-# CONFIG_HAVE_DMA_ATTRS is not set
+CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_HAVE_DMA_ATTRS=y
+CONFIG_USE_GENERIC_SMP_HELPERS=y
+# CONFIG_HAVE_CLK is not set
 CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
@@ -140,6 +147,7 @@ CONFIG_STOP_MACHINE=y
 CONFIG_BLOCK=y
 # CONFIG_BLK_DEV_IO_TRACE is not set
 CONFIG_BLK_DEV_BSG=y
+# CONFIG_BLK_DEV_INTEGRITY is not set
 CONFIG_BLOCK_COMPAT=y
 
 #
@@ -160,13 +168,8 @@ CONFIG_CLASSIC_RCU=y
 # Platform support
 #
 CONFIG_PPC_MULTIPLATFORM=y
-# CONFIG_PPC_82xx is not set
-# CONFIG_PPC_83xx is not set
-# CONFIG_PPC_86xx is not set
 # CONFIG_PPC_PSERIES is not set
 # CONFIG_PPC_ISERIES is not set
-# CONFIG_PPC_MPC512x is not set
-# CONFIG_PPC_MPC5121 is not set
 CONFIG_PPC_PMAC=y
 CONFIG_PPC_PMAC64=y
 # CONFIG_PPC_MAPLE is not set
@@ -224,7 +227,7 @@ CONFIG_HZ_250=y
 # CONFIG_HZ_300 is not set
 # CONFIG_HZ_1000 is not set
 CONFIG_HZ=250
-# CONFIG_SCHED_HRTICK is not set
+CONFIG_SCHED_HRTICK=y
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
@@ -256,6 +259,7 @@ CONFIG_FLAT_NODE_MEM_MAP=y
 CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_MIGRATION is not set
 CONFIG_RESOURCES_64BIT=y
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
@@ -265,6 +269,7 @@ CONFIG_FORCE_MAX_ZONEORDER=13
 # CONFIG_SCHED_SMT is not set
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
+CONFIG_EXTRA_TARGETS=""
 CONFIG_ARCH_WANTS_FREEZER_CONTROL=y
 # CONFIG_PM is not set
 CONFIG_SECCOMP=y
@@ -290,10 +295,6 @@ CONFIG_PCI_MSI=y
 CONFIG_PAGE_OFFSET=0xc000000000000000
 CONFIG_KERNEL_START=0xc000000000000000
 CONFIG_PHYSICAL_START=0x00000000
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -307,6 +308,7 @@ CONFIG_XFRM_USER=m
 # CONFIG_XFRM_SUB_POLICY is not set
 # CONFIG_XFRM_MIGRATE is not set
 # CONFIG_XFRM_STATISTICS is not set
+CONFIG_XFRM_IPCOMP=m
 CONFIG_NET_KEY=m
 # CONFIG_NET_KEY_MIGRATE is not set
 CONFIG_INET=y
@@ -422,6 +424,8 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_DEBUG_DRIVER is not set
 # CONFIG_DEBUG_DEVRES is not set
 # CONFIG_SYS_HYPERVISOR is not set
@@ -449,12 +453,14 @@ CONFIG_CDROM_PKTCDVD=m
 CONFIG_CDROM_PKTCDVD_BUFFERS=8
 # CONFIG_CDROM_PKTCDVD_WCACHE is not set
 # CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_PHANTOM is not set
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_HP_ILO is not set
 CONFIG_HAVE_IDE=y
 CONFIG_IDE=y
 CONFIG_BLK_DEV_IDE=y
@@ -462,6 +468,7 @@ CONFIG_BLK_DEV_IDE=y
 #
 # Please see Documentation/ide/ide.txt for help/info on IDE drives
 #
+CONFIG_IDE_TIMINGS=y
 # CONFIG_BLK_DEV_IDE_SATA is not set
 CONFIG_BLK_DEV_IDEDISK=y
 # CONFIG_IDEDISK_MULTI_MODE is not set
@@ -492,10 +499,8 @@ CONFIG_BLK_DEV_IDEDMA_PCI=y
 # CONFIG_BLK_DEV_AMD74XX is not set
 # CONFIG_BLK_DEV_CMD64X is not set
 # CONFIG_BLK_DEV_TRIFLEX is not set
-# CONFIG_BLK_DEV_CY82C693 is not set
 # CONFIG_BLK_DEV_CS5520 is not set
 # CONFIG_BLK_DEV_CS5530 is not set
-# CONFIG_BLK_DEV_HPT34X is not set
 # CONFIG_BLK_DEV_HPT366 is not set
 # CONFIG_BLK_DEV_JMICRON is not set
 # CONFIG_BLK_DEV_SC1200 is not set
@@ -516,8 +521,6 @@ CONFIG_BLK_DEV_IDE_PMAC=y
 CONFIG_BLK_DEV_IDE_PMAC_ATA100FIRST=y
 CONFIG_BLK_DEV_IDEDMA_PMAC=y
 CONFIG_BLK_DEV_IDEDMA=y
-# CONFIG_BLK_DEV_HD_ONLY is not set
-# CONFIG_BLK_DEV_HD is not set
 
 #
 # SCSI device support
@@ -592,6 +595,7 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_DC390T is not set
 # CONFIG_SCSI_DEBUG is not set
 # CONFIG_SCSI_SRP is not set
+# CONFIG_SCSI_DH is not set
 CONFIG_ATA=y
 # CONFIG_ATA_NONSTANDARD is not set
 CONFIG_SATA_PMP=y
@@ -675,29 +679,21 @@ CONFIG_DM_ZERO=m
 #
 # IEEE 1394 (FireWire) support
 #
-# CONFIG_FIREWIRE is not set
-CONFIG_IEEE1394=y
-
-#
-# Subsystem Options
-#
-# CONFIG_IEEE1394_VERBOSEDEBUG is not set
 
 #
-# Controllers
+# Enable only one of the two stacks, unless you know what you are doing
 #
-# CONFIG_IEEE1394_PCILYNX is not set
+# CONFIG_FIREWIRE is not set
+CONFIG_IEEE1394=y
 CONFIG_IEEE1394_OHCI1394=y
-
-#
-# Protocols
-#
-CONFIG_IEEE1394_VIDEO1394=m
+# CONFIG_IEEE1394_PCILYNX is not set
 CONFIG_IEEE1394_SBP2=m
 CONFIG_IEEE1394_ETH1394_ROM_ENTRY=y
 CONFIG_IEEE1394_ETH1394=m
-CONFIG_IEEE1394_DV1394=m
 CONFIG_IEEE1394_RAWIO=y
+CONFIG_IEEE1394_VIDEO1394=m
+CONFIG_IEEE1394_DV1394=m
+# CONFIG_IEEE1394_VERBOSEDEBUG is not set
 # CONFIG_I2O is not set
 CONFIG_MACINTOSH_DRIVERS=y
 CONFIG_ADB_PMU=y
@@ -712,7 +708,6 @@ CONFIG_WINDFARM_PM112=y
 CONFIG_WINDFARM_PM121=y
 # CONFIG_PMAC_RACKMETER is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 CONFIG_DUMMY=m
 CONFIG_BONDING=m
 # CONFIG_MACVLAN is not set
@@ -720,7 +715,23 @@ CONFIG_BONDING=m
 CONFIG_TUN=m
 # CONFIG_VETH is not set
 # CONFIG_ARCNET is not set
-# CONFIG_PHYLIB is not set
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+# CONFIG_MARVELL_PHY is not set
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+# CONFIG_SMSC_PHY is not set
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
+# CONFIG_FIXED_PHY is not set
+# CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
 # CONFIG_HAPPYMEAL is not set
@@ -740,10 +751,8 @@ CONFIG_ACENIC=y
 CONFIG_ACENIC_OMIT_TIGON_I=y
 # CONFIG_DL2K is not set
 CONFIG_E1000=y
-# CONFIG_E1000_NAPI is not set
 # CONFIG_E1000_DISABLE_PACKET_SPLIT is not set
 # CONFIG_E1000E is not set
-# CONFIG_E1000E_ENABLED is not set
 # CONFIG_IP1000 is not set
 # CONFIG_IGB is not set
 # CONFIG_NS83820 is not set
@@ -758,6 +767,7 @@ CONFIG_TIGON3=y
 # CONFIG_BNX2 is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
+# CONFIG_ATL1E is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
 # CONFIG_CHELSIO_T3 is not set
@@ -855,6 +865,7 @@ CONFIG_INPUT_MOUSE=y
 # CONFIG_MOUSE_PS2 is not set
 # CONFIG_MOUSE_SERIAL is not set
 # CONFIG_MOUSE_APPLETOUCH is not set
+# CONFIG_MOUSE_BCM5974 is not set
 # CONFIG_MOUSE_VSXXXAA is not set
 # CONFIG_INPUT_JOYSTICK is not set
 # CONFIG_INPUT_TABLET is not set
@@ -869,12 +880,14 @@ CONFIG_SERIO=y
 # CONFIG_SERIO_SERPORT is not set
 # CONFIG_SERIO_PCIPS2 is not set
 # CONFIG_SERIO_RAW is not set
+# CONFIG_SERIO_XILINX_XPS_PS2 is not set
 # CONFIG_GAMEPORT is not set
 
 #
 # Character devices
 #
 CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
 # CONFIG_VT_HW_CONSOLE_BINDING is not set
@@ -909,44 +922,69 @@ CONFIG_DEVPORT=y
 CONFIG_I2C=y
 CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
 CONFIG_I2C_ALGOBIT=y
 
 #
 # I2C Hardware Bus support
 #
+
+#
+# PC SMBus host controller drivers
+#
 # CONFIG_I2C_ALI1535 is not set
 # CONFIG_I2C_ALI1563 is not set
 # CONFIG_I2C_ALI15X3 is not set
 # CONFIG_I2C_AMD756 is not set
 # CONFIG_I2C_AMD8111 is not set
 # CONFIG_I2C_I801 is not set
-# CONFIG_I2C_I810 is not set
+# CONFIG_I2C_ISCH is not set
 # CONFIG_I2C_PIIX4 is not set
-CONFIG_I2C_POWERMAC=y
 # CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_PROSAVAGE is not set
-# CONFIG_I2C_SAVAGE4 is not set
-# CONFIG_I2C_SIMTEC is not set
 # CONFIG_I2C_SIS5595 is not set
 # CONFIG_I2C_SIS630 is not set
 # CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_TINY_USB is not set
 # CONFIG_I2C_VIA is not set
 # CONFIG_I2C_VIAPRO is not set
+
+#
+# Mac SMBus host controller drivers
+#
+CONFIG_I2C_POWERMAC=y
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Graphics adapter I2C/DDC channel drivers
+#
 # CONFIG_I2C_VOODOO3 is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
 # CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
 
 #
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
+# CONFIG_AT24 is not set
 # CONFIG_SENSORS_EEPROM is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
@@ -955,10 +993,13 @@ CONFIG_I2C_POWERMAC=y
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
 # CONFIG_SPI is not set
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+# CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 # CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
 
 #
@@ -970,8 +1011,10 @@ CONFIG_SSB_POSSIBLE=y
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
 
 #
 # Multimedia devices
@@ -1050,10 +1093,13 @@ CONFIG_FB_RADEON_BACKLIGHT=y
 # CONFIG_FB_TRIDENT is not set
 # CONFIG_FB_ARK is not set
 # CONFIG_FB_PM3 is not set
+# CONFIG_FB_CARMINE is not set
 # CONFIG_FB_IBM_GXT4500 is not set
 # CONFIG_FB_VIRTUAL is not set
 CONFIG_BACKLIGHT_LCD_SUPPORT=y
 CONFIG_LCD_CLASS_DEVICE=m
+# CONFIG_LCD_ILI9320 is not set
+# CONFIG_LCD_PLATFORM is not set
 CONFIG_BACKLIGHT_CLASS_DEVICE=y
 # CONFIG_BACKLIGHT_CORGI is not set
 
@@ -1077,15 +1123,7 @@ CONFIG_LOGO=y
 CONFIG_LOGO_LINUX_MONO=y
 CONFIG_LOGO_LINUX_VGA16=y
 CONFIG_LOGO_LINUX_CLUT224=y
-
-#
-# Sound
-#
 CONFIG_SOUND=m
-
-#
-# Advanced Linux Sound Architecture
-#
 CONFIG_SND=m
 CONFIG_SND_TIMER=m
 CONFIG_SND_PCM=m
@@ -1103,19 +1141,13 @@ CONFIG_SND_SUPPORT_OLD_API=y
 CONFIG_SND_VERBOSE_PROCFS=y
 # CONFIG_SND_VERBOSE_PRINTK is not set
 # CONFIG_SND_DEBUG is not set
-
-#
-# Generic devices
-#
+CONFIG_SND_DRIVERS=y
 # CONFIG_SND_DUMMY is not set
 # CONFIG_SND_VIRMIDI is not set
 # CONFIG_SND_MTPAV is not set
 # CONFIG_SND_SERIAL_U16550 is not set
 # CONFIG_SND_MPU401 is not set
-
-#
-# PCI devices
-#
+CONFIG_SND_PCI=y
 # CONFIG_SND_AD1889 is not set
 # CONFIG_SND_ALS300 is not set
 # CONFIG_SND_ALS4000 is not set
@@ -1177,20 +1209,9 @@ CONFIG_SND_VERBOSE_PROCFS=y
 # CONFIG_SND_VIRTUOSO is not set
 # CONFIG_SND_VX222 is not set
 # CONFIG_SND_YMFPCI is not set
-
-#
-# ALSA PowerMac devices
-#
+CONFIG_SND_PPC=y
 CONFIG_SND_POWERMAC=m
 CONFIG_SND_POWERMAC_AUTO_DRC=y
-
-#
-# ALSA PowerPC devices
-#
-
-#
-# Apple Onboard Audio driver
-#
 CONFIG_SND_AOA=m
 CONFIG_SND_AOA_FABRIC_LAYOUT=m
 CONFIG_SND_AOA_ONYX=m
@@ -1198,30 +1219,11 @@ CONFIG_SND_AOA_TAS=m
 CONFIG_SND_AOA_TOONIE=m
 CONFIG_SND_AOA_SOUNDBUS=m
 CONFIG_SND_AOA_SOUNDBUS_I2S=m
-
-#
-# USB devices
-#
+CONFIG_SND_USB=y
 CONFIG_SND_USB_AUDIO=m
 # CONFIG_SND_USB_USX2Y is not set
 # CONFIG_SND_USB_CAIAQ is not set
-
-#
-# System on Chip audio support
-#
 # CONFIG_SND_SOC is not set
-
-#
-# ALSA SoC audio for Freescale SOCs
-#
-
-#
-# SoC Audio for the Texas Instruments OMAP
-#
-
-#
-# Open Sound System
-#
 # CONFIG_SOUND_PRIME is not set
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
@@ -1256,6 +1258,7 @@ CONFIG_USB_DEVICEFS=y
 CONFIG_USB_DEVICE_CLASS=y
 # CONFIG_USB_DYNAMIC_MINORS is not set
 # CONFIG_USB_OTG is not set
+CONFIG_USB_MON=y
 
 #
 # USB Host Controller Drivers
@@ -1306,6 +1309,7 @@ CONFIG_USB_STORAGE_JUMPSHOT=y
 # CONFIG_USB_STORAGE_ALAUDA is not set
 # CONFIG_USB_STORAGE_ONETOUCH is not set
 # CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_SIERRA is not set
 # CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
 # CONFIG_USB_LIBUSUAL is not set
 
@@ -1314,7 +1318,6 @@ CONFIG_USB_STORAGE_JUMPSHOT=y
 #
 # CONFIG_USB_MDC800 is not set
 # CONFIG_USB_MICROTEK is not set
-CONFIG_USB_MON=y
 
 #
 # USB port drivers
@@ -1323,7 +1326,6 @@ CONFIG_USB_SERIAL=m
 CONFIG_USB_EZUSB=y
 CONFIG_USB_SERIAL_GENERIC=y
 # CONFIG_USB_SERIAL_AIRCABLE is not set
-# CONFIG_USB_SERIAL_AIRPRIME is not set
 # CONFIG_USB_SERIAL_ARK3116 is not set
 CONFIG_USB_SERIAL_BELKIN=m
 # CONFIG_USB_SERIAL_CH341 is not set
@@ -1383,7 +1385,6 @@ CONFIG_USB_SERIAL_OMNINET=m
 # CONFIG_USB_EMI62 is not set
 # CONFIG_USB_EMI26 is not set
 # CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_AUERSWALD is not set
 # CONFIG_USB_RIO500 is not set
 # CONFIG_USB_LEGOTOWER is not set
 # CONFIG_USB_LCD is not set
@@ -1497,6 +1498,7 @@ CONFIG_HFSPLUS_FS=m
 CONFIG_CRAMFS=y
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
 # CONFIG_ROMFS_FS is not set
@@ -1519,7 +1521,6 @@ CONFIG_NFS_ACL_SUPPORT=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_BIND34 is not set
 CONFIG_RPCSEC_GSS_KRB5=y
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -1603,6 +1604,7 @@ CONFIG_BITREVERSE=y
 # CONFIG_GENERIC_FIND_FIRST_BIT is not set
 CONFIG_CRC_CCITT=m
 # CONFIG_CRC16 is not set
+CONFIG_CRC_T10DIF=y
 CONFIG_CRC_ITU_T=m
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
@@ -1629,8 +1631,10 @@ CONFIG_DEBUG_FS=y
 CONFIG_DEBUG_KERNEL=y
 # CONFIG_DEBUG_SHIRQ is not set
 CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
 CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
+CONFIG_SCHEDSTATS=y
 # CONFIG_TIMER_STATS is not set
 # CONFIG_DEBUG_OBJECTS is not set
 # CONFIG_SLUB_DEBUG_ON is not set
@@ -1644,22 +1648,37 @@ CONFIG_DEBUG_MUTEXES=y
 # CONFIG_LOCK_STAT is not set
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
 # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+CONFIG_STACKTRACE=y
 # CONFIG_DEBUG_KOBJECT is not set
 CONFIG_DEBUG_BUGVERBOSE=y
 # CONFIG_DEBUG_INFO is not set
 # CONFIG_DEBUG_VM is not set
 # CONFIG_DEBUG_WRITECOUNT is not set
+CONFIG_DEBUG_MEMORY_INIT=y
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
+CONFIG_FRAME_POINTER=y
 # CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_FAULT_INJECTION is not set
+CONFIG_LATENCYTOP=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+# CONFIG_FTRACE is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
 # CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
 # CONFIG_DEBUG_PAGEALLOC is not set
-# CONFIG_DEBUGGER is not set
+# CONFIG_CODE_PATCHING_SELFTEST is not set
+# CONFIG_FTR_FIXUP_SELFTEST is not set
+# CONFIG_XMON is not set
 CONFIG_IRQSTACKS=y
 # CONFIG_VIRQ_DEBUG is not set
 CONFIG_BOOTX_TEXT=y
@@ -1718,6 +1737,10 @@ CONFIG_CRYPTO_CRC32C=m
 CONFIG_CRYPTO_MD4=m
 CONFIG_CRYPTO_MD5=y
 CONFIG_CRYPTO_MICHAEL_MIC=m
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
 CONFIG_CRYPTO_SHA1=m
 CONFIG_CRYPTO_SHA256=m
 CONFIG_CRYPTO_SHA512=m
diff --git a/arch/powerpc/configs/iseries_defconfig b/arch/powerpc/configs/iseries_defconfig
index 63f0bdb6340d..2c3f13577f4b 100644
--- a/arch/powerpc/configs/iseries_defconfig
+++ b/arch/powerpc/configs/iseries_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc3
-# Tue May 20 20:01:36 2008
+# Linux kernel version: 2.6.27-rc4
+# Tue Aug 26 13:15:49 2008
 #
 CONFIG_PPC64=y
 
@@ -31,6 +31,7 @@ CONFIG_GENERIC_HARDIRQS=y
 CONFIG_HAVE_SETUP_PER_CPU_AREA=y
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
 CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
@@ -94,9 +95,8 @@ CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 CONFIG_SYSCTL=y
 # CONFIG_EMBEDDED is not set
 CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
+CONFIG_KALLSYMS_ALL=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
@@ -120,10 +120,16 @@ CONFIG_SLUB=y
 # CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
+CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
-# CONFIG_HAVE_DMA_ATTRS is not set
+CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_HAVE_DMA_ATTRS=y
+CONFIG_USE_GENERIC_SMP_HELPERS=y
+# CONFIG_HAVE_CLK is not set
 CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
@@ -139,6 +145,7 @@ CONFIG_STOP_MACHINE=y
 CONFIG_BLOCK=y
 # CONFIG_BLK_DEV_IO_TRACE is not set
 CONFIG_BLK_DEV_BSG=y
+# CONFIG_BLK_DEV_INTEGRITY is not set
 CONFIG_BLOCK_COMPAT=y
 
 #
@@ -159,9 +166,6 @@ CONFIG_CLASSIC_RCU=y
 # Platform support
 #
 CONFIG_PPC_MULTIPLATFORM=y
-# CONFIG_PPC_82xx is not set
-# CONFIG_PPC_83xx is not set
-# CONFIG_PPC_86xx is not set
 # CONFIG_PPC_PSERIES is not set
 CONFIG_LPARCFG=y
 CONFIG_PPC_ISERIES=y
@@ -173,8 +177,6 @@ CONFIG_VIODASD=y
 CONFIG_VIOCD=m
 CONFIG_VIOTAPE=m
 CONFIG_VIOPATH=y
-# CONFIG_PPC_MPC512x is not set
-# CONFIG_PPC_MPC5121 is not set
 # CONFIG_PPC_PMAC is not set
 # CONFIG_PPC_MAPLE is not set
 # CONFIG_PPC_PASEMI is not set
@@ -211,7 +213,7 @@ CONFIG_HZ_250=y
 # CONFIG_HZ_300 is not set
 # CONFIG_HZ_1000 is not set
 CONFIG_HZ=250
-# CONFIG_SCHED_HRTICK is not set
+CONFIG_SCHED_HRTICK=y
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
@@ -241,6 +243,7 @@ CONFIG_FLAT_NODE_MEM_MAP=y
 CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_MIGRATION is not set
 CONFIG_RESOURCES_64BIT=y
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
@@ -250,6 +253,7 @@ CONFIG_FORCE_MAX_ZONEORDER=13
 # CONFIG_SCHED_SMT is not set
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
+CONFIG_EXTRA_TARGETS=""
 # CONFIG_PM is not set
 CONFIG_SECCOMP=y
 CONFIG_ISA_DMA_API=y
@@ -274,10 +278,6 @@ CONFIG_ARCH_SUPPORTS_MSI=y
 CONFIG_PAGE_OFFSET=0xc000000000000000
 CONFIG_KERNEL_START=0xc000000000000000
 CONFIG_PHYSICAL_START=0x00000000
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -291,6 +291,7 @@ CONFIG_XFRM_USER=m
 CONFIG_XFRM_SUB_POLICY=y
 # CONFIG_XFRM_MIGRATE is not set
 # CONFIG_XFRM_STATISTICS is not set
+CONFIG_XFRM_IPCOMP=m
 CONFIG_NET_KEY=m
 # CONFIG_NET_KEY_MIGRATE is not set
 CONFIG_INET=y
@@ -480,7 +481,9 @@ CONFIG_NET_CLS_ROUTE=y
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=m
+CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_DEBUG_DRIVER is not set
 # CONFIG_DEBUG_DEVRES is not set
 # CONFIG_SYS_HYPERVISOR is not set
@@ -504,12 +507,14 @@ CONFIG_BLK_DEV_RAM_SIZE=65536
 # CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_PHANTOM is not set
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_HP_ILO is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -588,6 +593,7 @@ CONFIG_SCSI_IBMVSCSI=m
 # CONFIG_SCSI_DC390T is not set
 # CONFIG_SCSI_DEBUG is not set
 # CONFIG_SCSI_SRP is not set
+# CONFIG_SCSI_DH is not set
 # CONFIG_ATA is not set
 CONFIG_MD=y
 CONFIG_BLK_DEV_MD=y
@@ -612,12 +618,15 @@ CONFIG_DM_ZERO=m
 #
 # IEEE 1394 (FireWire) support
 #
+
+#
+# Enable only one of the two stacks, unless you know what you are doing
+#
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 CONFIG_DUMMY=m
 CONFIG_BONDING=m
 # CONFIG_MACVLAN is not set
@@ -655,6 +664,7 @@ CONFIG_E100=y
 # CONFIG_SIS900 is not set
 # CONFIG_EPIC100 is not set
 # CONFIG_SUNDANCE is not set
+# CONFIG_TLAN is not set
 # CONFIG_VIA_RHINE is not set
 # CONFIG_SC92031 is not set
 CONFIG_NETDEV_1000=y
@@ -662,10 +672,8 @@ CONFIG_ACENIC=m
 # CONFIG_ACENIC_OMIT_TIGON_I is not set
 # CONFIG_DL2K is not set
 CONFIG_E1000=m
-# CONFIG_E1000_NAPI is not set
 # CONFIG_E1000_DISABLE_PACKET_SPLIT is not set
 # CONFIG_E1000E is not set
-# CONFIG_E1000E_ENABLED is not set
 # CONFIG_IP1000 is not set
 # CONFIG_IGB is not set
 # CONFIG_NS83820 is not set
@@ -680,6 +688,7 @@ CONFIG_E1000=m
 # CONFIG_BNX2 is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
+# CONFIG_ATL1E is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
 # CONFIG_CHELSIO_T3 is not set
@@ -767,6 +776,7 @@ CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
 # Character devices
 #
 CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
 # CONFIG_VT_HW_CONSOLE_BINDING is not set
@@ -789,6 +799,7 @@ CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
 CONFIG_HVC_DRIVER=y
+CONFIG_HVC_IRQ=y
 CONFIG_HVC_ISERIES=y
 # CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
@@ -803,10 +814,13 @@ CONFIG_MAX_RAW_DEVS=256
 CONFIG_DEVPORT=y
 # CONFIG_I2C is not set
 # CONFIG_SPI is not set
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+# CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 # CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
 
 #
@@ -818,8 +832,10 @@ CONFIG_SSB_POSSIBLE=y
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
 
 #
 # Multimedia devices
@@ -858,10 +874,6 @@ CONFIG_SSB_POSSIBLE=y
 CONFIG_VGA_CONSOLE=y
 # CONFIG_VGACON_SOFT_SCROLLBACK is not set
 CONFIG_DUMMY_CONSOLE=y
-
-#
-# Sound
-#
 # CONFIG_SOUND is not set
 # CONFIG_HID_SUPPORT is not set
 # CONFIG_USB_SUPPORT is not set
@@ -910,7 +922,6 @@ CONFIG_XFS_POSIX_ACL=y
 # CONFIG_XFS_RT is not set
 # CONFIG_XFS_DEBUG is not set
 CONFIG_GFS2_FS=m
-CONFIG_GFS2_FS_LOCKING_NOLOCK=m
 CONFIG_GFS2_FS_LOCKING_DLM=m
 # CONFIG_OCFS2_FS is not set
 CONFIG_DNOTIFY=y
@@ -967,6 +978,7 @@ CONFIG_CONFIGFS_FS=m
 CONFIG_CRAMFS=y
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
 # CONFIG_ROMFS_FS is not set
@@ -989,7 +1001,6 @@ CONFIG_NFS_ACL_SUPPORT=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_BIND34 is not set
 CONFIG_RPCSEC_GSS_KRB5=y
 CONFIG_RPCSEC_GSS_SPKM3=m
 # CONFIG_SMB_FS is not set
@@ -1059,6 +1070,7 @@ CONFIG_BITREVERSE=y
 # CONFIG_GENERIC_FIND_FIRST_BIT is not set
 CONFIG_CRC_CCITT=m
 # CONFIG_CRC16 is not set
+CONFIG_CRC_T10DIF=y
 CONFIG_CRC_ITU_T=m
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
@@ -1089,8 +1101,10 @@ CONFIG_DEBUG_FS=y
 CONFIG_DEBUG_KERNEL=y
 # CONFIG_DEBUG_SHIRQ is not set
 CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
 CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
+CONFIG_SCHEDSTATS=y
 # CONFIG_TIMER_STATS is not set
 # CONFIG_DEBUG_OBJECTS is not set
 # CONFIG_SLUB_DEBUG_ON is not set
@@ -1104,22 +1118,37 @@ CONFIG_SCHED_DEBUG=y
 # CONFIG_LOCK_STAT is not set
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
 # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+CONFIG_STACKTRACE=y
 # CONFIG_DEBUG_KOBJECT is not set
 CONFIG_DEBUG_BUGVERBOSE=y
 # CONFIG_DEBUG_INFO is not set
 # CONFIG_DEBUG_VM is not set
 # CONFIG_DEBUG_WRITECOUNT is not set
+CONFIG_DEBUG_MEMORY_INIT=y
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
+CONFIG_FRAME_POINTER=y
 # CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_FAULT_INJECTION is not set
+CONFIG_LATENCYTOP=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+# CONFIG_FTRACE is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
 # CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
 CONFIG_DEBUG_STACKOVERFLOW=y
 CONFIG_DEBUG_STACK_USAGE=y
 # CONFIG_DEBUG_PAGEALLOC is not set
-# CONFIG_DEBUGGER is not set
+# CONFIG_CODE_PATCHING_SELFTEST is not set
+# CONFIG_FTR_FIXUP_SELFTEST is not set
+# CONFIG_XMON is not set
 CONFIG_IRQSTACKS=y
 # CONFIG_VIRQ_DEBUG is not set
 # CONFIG_BOOTX_TEXT is not set
@@ -1178,6 +1207,10 @@ CONFIG_CRYPTO_CRC32C=m
 CONFIG_CRYPTO_MD4=m
 CONFIG_CRYPTO_MD5=y
 CONFIG_CRYPTO_MICHAEL_MIC=m
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
 CONFIG_CRYPTO_SHA1=m
 CONFIG_CRYPTO_SHA256=m
 CONFIG_CRYPTO_SHA512=m
diff --git a/arch/powerpc/configs/linkstation_defconfig b/arch/powerpc/configs/linkstation_defconfig
index 48434c2c7628..6fc4c2127757 100644
--- a/arch/powerpc/configs/linkstation_defconfig
+++ b/arch/powerpc/configs/linkstation_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc5
-# Mon Jun  9 08:52:10 2008
+# Linux kernel version: 2.6.27-rc4
+# Thu Aug 21 00:52:05 2008
 #
 # CONFIG_PPC64 is not set
 
@@ -32,6 +32,7 @@ CONFIG_GENERIC_HARDIRQS=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
@@ -93,7 +94,6 @@ CONFIG_INITRAMFS_SOURCE=""
 CONFIG_SYSCTL=y
 # CONFIG_EMBEDDED is not set
 CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
@@ -119,10 +119,16 @@ CONFIG_SLUB=y
 # CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
+CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
 # CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+# CONFIG_HAVE_CLK is not set
 CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
@@ -139,6 +145,7 @@ CONFIG_BLOCK=y
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -158,25 +165,25 @@ CONFIG_CLASSIC_RCU=y
 # Platform support
 #
 CONFIG_PPC_MULTIPLATFORM=y
-# CONFIG_PPC_82xx is not set
-# CONFIG_PPC_83xx is not set
-# CONFIG_PPC_86xx is not set
 CONFIG_CLASSIC32=y
 # CONFIG_PPC_CHRP is not set
-# CONFIG_PPC_MPC512x is not set
-# CONFIG_PPC_MPC5121 is not set
 # CONFIG_MPC5121_ADS is not set
+# CONFIG_MPC5121_GENERIC is not set
 # CONFIG_PPC_MPC52xx is not set
 # CONFIG_PPC_PMAC is not set
 # CONFIG_PPC_CELL is not set
 # CONFIG_PPC_CELL_NATIVE is not set
+# CONFIG_PPC_82xx is not set
 # CONFIG_PQ2ADS is not set
+# CONFIG_PPC_83xx is not set
+# CONFIG_PPC_86xx is not set
 CONFIG_EMBEDDED6xx=y
 CONFIG_LINKSTATION=y
 # CONFIG_STORCENTER is not set
 # CONFIG_MPC7448HPC2 is not set
 # CONFIG_PPC_HOLLY is not set
 # CONFIG_PPC_PRPMC2800 is not set
+# CONFIG_PPC_C2K is not set
 CONFIG_MPC10X_BRIDGE=y
 CONFIG_MPC10X_OPENPIC=y
 # CONFIG_MPC10X_STORE_GATHERING is not set
@@ -207,7 +214,7 @@ CONFIG_HZ_100=y
 # CONFIG_HZ_300 is not set
 # CONFIG_HZ_1000 is not set
 CONFIG_HZ=100
-# CONFIG_SCHED_HRTICK is not set
+CONFIG_SCHED_HRTICK=y
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
@@ -230,6 +237,7 @@ CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_MIGRATION=y
 # CONFIG_RESOURCES_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
@@ -237,6 +245,7 @@ CONFIG_VIRT_TO_BUS=y
 CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
+CONFIG_EXTRA_TARGETS=""
 # CONFIG_PM is not set
 CONFIG_SECCOMP=y
 CONFIG_ISA_DMA_API=y
@@ -273,10 +282,6 @@ CONFIG_PAGE_OFFSET=0xc0000000
 CONFIG_KERNEL_START=0xc0000000
 CONFIG_PHYSICAL_START=0x00000000
 CONFIG_TASK_SIZE=0xc0000000
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -461,6 +466,7 @@ CONFIG_IP_NF_ARP_MANGLE=m
 #
 # CONFIG_CFG80211 is not set
 CONFIG_WIRELESS_EXT=y
+CONFIG_WIRELESS_EXT_SYSFS=y
 # CONFIG_MAC80211 is not set
 CONFIG_IEEE80211=m
 CONFIG_IEEE80211_DEBUG=y
@@ -480,7 +486,9 @@ CONFIG_IEEE80211_CRYPT_TKIP=m
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=m
+CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_DEBUG_DRIVER is not set
 # CONFIG_DEBUG_DEVRES is not set
 # CONFIG_SYS_HYPERVISOR is not set
@@ -592,12 +600,14 @@ CONFIG_BLK_DEV_RAM_SIZE=8192
 # CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_PHANTOM is not set
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_HP_ILO is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -676,6 +686,7 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_NSP32 is not set
 # CONFIG_SCSI_DEBUG is not set
 # CONFIG_SCSI_SRP is not set
+# CONFIG_SCSI_DH is not set
 CONFIG_ATA=y
 # CONFIG_ATA_NONSTANDARD is not set
 CONFIG_SATA_PMP=y
@@ -743,12 +754,15 @@ CONFIG_PATA_SIL680=y
 #
 # IEEE 1394 (FireWire) support
 #
+
+#
+# Enable only one of the two stacks, unless you know what you are doing
+#
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -785,14 +799,12 @@ CONFIG_NETDEV_1000=y
 # CONFIG_DL2K is not set
 # CONFIG_E1000 is not set
 # CONFIG_E1000E is not set
-# CONFIG_E1000E_ENABLED is not set
 # CONFIG_IP1000 is not set
 # CONFIG_IGB is not set
 # CONFIG_NS83820 is not set
 # CONFIG_HAMACHI is not set
 # CONFIG_YELLOWFIN is not set
 CONFIG_R8169=y
-# CONFIG_R8169_NAPI is not set
 # CONFIG_SIS190 is not set
 # CONFIG_SKGE is not set
 # CONFIG_SKY2 is not set
@@ -803,6 +815,7 @@ CONFIG_R8169=y
 # CONFIG_MV643XX_ETH is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
+# CONFIG_ATL1E is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
 # CONFIG_CHELSIO_T3 is not set
@@ -889,12 +902,14 @@ CONFIG_SERIO=y
 CONFIG_SERIO_SERPORT=y
 # CONFIG_SERIO_PCIPS2 is not set
 # CONFIG_SERIO_RAW is not set
+# CONFIG_SERIO_XILINX_XPS_PS2 is not set
 # CONFIG_GAMEPORT is not set
 
 #
 # Character devices
 #
 CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
 # CONFIG_VT_HW_CONSOLE_BINDING is not set
@@ -934,43 +949,64 @@ CONFIG_DEVPORT=y
 CONFIG_I2C=y
 CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
 
 #
 # I2C Hardware Bus support
 #
+
+#
+# PC SMBus host controller drivers
+#
 # CONFIG_I2C_ALI1535 is not set
 # CONFIG_I2C_ALI1563 is not set
 # CONFIG_I2C_ALI15X3 is not set
 # CONFIG_I2C_AMD756 is not set
 # CONFIG_I2C_AMD8111 is not set
 # CONFIG_I2C_I801 is not set
-# CONFIG_I2C_I810 is not set
+# CONFIG_I2C_ISCH is not set
 # CONFIG_I2C_PIIX4 is not set
-CONFIG_I2C_MPC=y
 # CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_PROSAVAGE is not set
-# CONFIG_I2C_SAVAGE4 is not set
-# CONFIG_I2C_SIMTEC is not set
 # CONFIG_I2C_SIS5595 is not set
 # CONFIG_I2C_SIS630 is not set
 # CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_TINY_USB is not set
 # CONFIG_I2C_VIA is not set
 # CONFIG_I2C_VIAPRO is not set
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+CONFIG_I2C_MPC=y
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Graphics adapter I2C/DDC channel drivers
+#
 # CONFIG_I2C_VOODOO3 is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
 # CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
 
 #
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
+# CONFIG_AT24 is not set
 CONFIG_SENSORS_EEPROM=m
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
@@ -979,10 +1015,13 @@ CONFIG_SENSORS_EEPROM=m
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
 # CONFIG_SPI is not set
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+# CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 CONFIG_HWMON=y
 # CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_AD7414 is not set
 # CONFIG_SENSORS_AD7418 is not set
 # CONFIG_SENSORS_ADM1021 is not set
 # CONFIG_SENSORS_ADM1025 is not set
@@ -1036,6 +1075,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_W83627EHF is not set
 # CONFIG_HWMON_DEBUG_CHIP is not set
 # CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
 
 #
@@ -1047,8 +1087,10 @@ CONFIG_SSB_POSSIBLE=y
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
 
 #
 # Multimedia devices
@@ -1086,10 +1128,6 @@ CONFIG_VIDEO_OUTPUT_CONTROL=m
 #
 # CONFIG_VGA_CONSOLE is not set
 CONFIG_DUMMY_CONSOLE=y
-
-#
-# Sound
-#
 # CONFIG_SOUND is not set
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=m
@@ -1121,6 +1159,7 @@ CONFIG_USB_DEVICEFS=y
 CONFIG_USB_DEVICE_CLASS=y
 # CONFIG_USB_DYNAMIC_MINORS is not set
 # CONFIG_USB_OTG is not set
+CONFIG_USB_MON=y
 
 #
 # USB Host Controller Drivers
@@ -1172,6 +1211,7 @@ CONFIG_USB_STORAGE=m
 # CONFIG_USB_STORAGE_ALAUDA is not set
 # CONFIG_USB_STORAGE_ONETOUCH is not set
 # CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_SIERRA is not set
 # CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
 # CONFIG_USB_LIBUSUAL is not set
 
@@ -1180,7 +1220,6 @@ CONFIG_USB_STORAGE=m
 #
 # CONFIG_USB_MDC800 is not set
 # CONFIG_USB_MICROTEK is not set
-CONFIG_USB_MON=y
 
 #
 # USB port drivers
@@ -1190,7 +1229,6 @@ CONFIG_USB_SERIAL_CONSOLE=y
 # CONFIG_USB_EZUSB is not set
 # CONFIG_USB_SERIAL_GENERIC is not set
 # CONFIG_USB_SERIAL_AIRCABLE is not set
-# CONFIG_USB_SERIAL_AIRPRIME is not set
 # CONFIG_USB_SERIAL_ARK3116 is not set
 # CONFIG_USB_SERIAL_BELKIN is not set
 # CONFIG_USB_SERIAL_CH341 is not set
@@ -1237,7 +1275,6 @@ CONFIG_USB_SERIAL_FTDI_SIO=y
 # CONFIG_USB_EMI62 is not set
 # CONFIG_USB_EMI26 is not set
 # CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_AUERSWALD is not set
 # CONFIG_USB_RIO500 is not set
 # CONFIG_USB_LEGOTOWER is not set
 # CONFIG_USB_LCD is not set
@@ -1291,6 +1328,7 @@ CONFIG_RTC_DRV_RS5C372=y
 # CONFIG_RTC_DRV_PCF8583 is not set
 # CONFIG_RTC_DRV_M41T80 is not set
 # CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
 
 #
 # SPI RTC drivers
@@ -1392,6 +1430,7 @@ CONFIG_TMPFS=y
 # CONFIG_CRAMFS is not set
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
 # CONFIG_ROMFS_FS is not set
@@ -1402,11 +1441,11 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 CONFIG_NFS_V3_ACL=y
 CONFIG_NFS_V4=y
+CONFIG_ROOT_NFS=y
 CONFIG_NFSD=m
 CONFIG_NFSD_V3=y
 # CONFIG_NFSD_V3_ACL is not set
 # CONFIG_NFSD_V4 is not set
-CONFIG_ROOT_NFS=y
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_EXPORTFS=m
@@ -1414,7 +1453,6 @@ CONFIG_NFS_ACL_SUPPORT=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_BIND34 is not set
 CONFIG_RPCSEC_GSS_KRB5=y
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -1482,6 +1520,7 @@ CONFIG_BITREVERSE=y
 # CONFIG_GENERIC_FIND_FIRST_BIT is not set
 CONFIG_CRC_CCITT=m
 # CONFIG_CRC16 is not set
+CONFIG_CRC_T10DIF=y
 CONFIG_CRC_ITU_T=m
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
@@ -1510,6 +1549,8 @@ CONFIG_MAGIC_SYSRQ=y
 CONFIG_DEBUG_KERNEL=y
 # CONFIG_DEBUG_SHIRQ is not set
 CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
 CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
@@ -1527,17 +1568,29 @@ CONFIG_DEBUG_BUGVERBOSE=y
 # CONFIG_DEBUG_INFO is not set
 # CONFIG_DEBUG_VM is not set
 # CONFIG_DEBUG_WRITECOUNT is not set
+CONFIG_DEBUG_MEMORY_INIT=y
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+# CONFIG_FTRACE is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
 # CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
 # CONFIG_DEBUG_PAGEALLOC is not set
-# CONFIG_DEBUGGER is not set
+# CONFIG_CODE_PATCHING_SELFTEST is not set
+# CONFIG_FTR_FIXUP_SELFTEST is not set
+# CONFIG_XMON is not set
 # CONFIG_IRQSTACKS is not set
 # CONFIG_BDI_SWITCH is not set
 # CONFIG_BOOTX_TEXT is not set
@@ -1556,6 +1609,7 @@ CONFIG_CRYPTO=y
 #
 CONFIG_CRYPTO_ALGAPI=y
 CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_HASH=m
 CONFIG_CRYPTO_MANAGER=y
 # CONFIG_CRYPTO_GF128MUL is not set
 # CONFIG_CRYPTO_NULL is not set
@@ -1594,6 +1648,10 @@ CONFIG_CRYPTO_CRC32C=m
 CONFIG_CRYPTO_MD4=m
 CONFIG_CRYPTO_MD5=y
 CONFIG_CRYPTO_MICHAEL_MIC=m
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
 CONFIG_CRYPTO_SHA1=m
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
@@ -1627,5 +1685,6 @@ CONFIG_CRYPTO_DEFLATE=m
 # CONFIG_CRYPTO_LZO is not set
 CONFIG_CRYPTO_HW=y
 # CONFIG_CRYPTO_DEV_HIFN_795X is not set
+# CONFIG_CRYPTO_DEV_TALITOS is not set
 # CONFIG_PPC_CLOCK is not set
 # CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/maple_defconfig b/arch/powerpc/configs/maple_defconfig
index 7a166a39d92d..1a3b6423222b 100644
--- a/arch/powerpc/configs/maple_defconfig
+++ b/arch/powerpc/configs/maple_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.24-rc4
-# Thu Dec  6 16:48:26 2007
+# Linux kernel version: 2.6.27-rc4
+# Tue Aug 26 13:18:58 2008
 #
 CONFIG_PPC64=y
 
@@ -27,7 +27,12 @@ CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_TIME_VSYSCALL=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
+CONFIG_HAVE_SETUP_PER_CPU_AREA=y
 CONFIG_IRQ_PER_CPU=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
 CONFIG_ARCH_HAS_ILOG2_U64=y
@@ -67,16 +72,20 @@ CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_POSIX_MQUEUE=y
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
 # CONFIG_AUDIT is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=17
 # CONFIG_CGROUPS is not set
-# CONFIG_FAIR_GROUP_SCHED is not set
+# CONFIG_GROUP_SCHED is not set
 CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_RELAY is not set
+CONFIG_NAMESPACES=y
+# CONFIG_UTS_NS is not set
+# CONFIG_IPC_NS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
 # CONFIG_BLK_DEV_INITRD is not set
 CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 CONFIG_SYSCTL=y
@@ -89,11 +98,13 @@ CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
+# CONFIG_COMPAT_BRK is not set
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
 CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
 CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_VM_EVENT_COUNTERS=y
@@ -101,10 +112,28 @@ CONFIG_SLUB_DEBUG=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
+CONFIG_PROFILING=y
+# CONFIG_MARKERS is not set
+CONFIG_OPROFILE=m
+CONFIG_HAVE_OPROFILE=y
+CONFIG_KPROBES=y
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
+CONFIG_KRETPROBES=y
+CONFIG_HAVE_IOREMAP_PROT=y
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_HAVE_DMA_ATTRS=y
+CONFIG_USE_GENERIC_SMP_HELPERS=y
+# CONFIG_HAVE_CLK is not set
+CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
+CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 CONFIG_MODVERSIONS=y
@@ -114,6 +143,7 @@ CONFIG_STOP_MACHINE=y
 CONFIG_BLOCK=y
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 CONFIG_BLOCK_COMPAT=y
 
 #
@@ -128,29 +158,26 @@ CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_CFQ is not set
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_CLASSIC_RCU=y
 
 #
 # Platform support
 #
 CONFIG_PPC_MULTIPLATFORM=y
-# CONFIG_PPC_82xx is not set
-# CONFIG_PPC_83xx is not set
-# CONFIG_PPC_86xx is not set
 # CONFIG_PPC_PSERIES is not set
 # CONFIG_PPC_ISERIES is not set
-# CONFIG_PPC_MPC52xx is not set
-# CONFIG_PPC_MPC5200 is not set
 # CONFIG_PPC_PMAC is not set
 CONFIG_PPC_MAPLE=y
 # CONFIG_PPC_PASEMI is not set
-# CONFIG_PPC_CELLEB is not set
 # CONFIG_PPC_PS3 is not set
 # CONFIG_PPC_CELL is not set
 # CONFIG_PPC_CELL_NATIVE is not set
 # CONFIG_PPC_IBM_CELL_BLADE is not set
+# CONFIG_PPC_CELLEB is not set
 # CONFIG_PQ2ADS is not set
 CONFIG_PPC_NATIVE=y
 CONFIG_UDBG_RTAS_CONSOLE=y
+# CONFIG_IPIC is not set
 CONFIG_MPIC=y
 # CONFIG_MPIC_WEIRD is not set
 # CONFIG_PPC_I8259 is not set
@@ -166,7 +193,6 @@ CONFIG_PPC_970_NAP=y
 # CONFIG_PPC_INDIRECT_IO is not set
 # CONFIG_GENERIC_IOMAP is not set
 # CONFIG_CPU_FREQ is not set
-# CONFIG_CPM2 is not set
 # CONFIG_FSL_ULI1575 is not set
 
 #
@@ -181,16 +207,19 @@ CONFIG_HZ_250=y
 # CONFIG_HZ_300 is not set
 # CONFIG_HZ_1000 is not set
 CONFIG_HZ=250
+CONFIG_SCHED_HRTICK=y
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
-# CONFIG_PREEMPT_BKL is not set
 CONFIG_BINFMT_ELF=y
+CONFIG_COMPAT_BINFMT_ELF=y
 # CONFIG_BINFMT_MISC is not set
-CONFIG_FORCE_MAX_ZONEORDER=13
 CONFIG_HUGETLB_PAGE_SIZE_VARIABLE=y
 CONFIG_IOMMU_VMERGE=y
+CONFIG_IOMMU_HELPER=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+CONFIG_ARCH_HAS_WALK_MEMORY=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
 CONFIG_KEXEC=y
 # CONFIG_CRASH_DUMP is not set
 CONFIG_IRQ_ALL_CPUS=y
@@ -207,18 +236,21 @@ CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
 CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
+CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_MIGRATION is not set
 CONFIG_RESOURCES_64BIT=y
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 # CONFIG_PPC_HAS_HASH_64K is not set
 # CONFIG_PPC_64K_PAGES is not set
+CONFIG_FORCE_MAX_ZONEORDER=13
 # CONFIG_SCHED_SMT is not set
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
+CONFIG_EXTRA_TARGETS=""
 # CONFIG_PM is not set
 CONFIG_SECCOMP=y
-# CONFIG_WANT_DEVICE_TREE is not set
 CONFIG_ISA_DMA_API=y
 
 #
@@ -237,11 +269,10 @@ CONFIG_PCI_LEGACY=y
 # CONFIG_PCI_DEBUG is not set
 # CONFIG_PCCARD is not set
 # CONFIG_HOTPLUG_PCI is not set
+# CONFIG_HAS_RAPIDIO is not set
+CONFIG_PAGE_OFFSET=0xc000000000000000
 CONFIG_KERNEL_START=0xc000000000000000
-
-#
-# Networking
-#
+CONFIG_PHYSICAL_START=0x00000000
 CONFIG_NET=y
 
 #
@@ -254,6 +285,7 @@ CONFIG_XFRM=y
 CONFIG_XFRM_USER=m
 # CONFIG_XFRM_SUB_POLICY is not set
 # CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
 # CONFIG_NET_KEY is not set
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
@@ -284,8 +316,6 @@ CONFIG_TCP_CONG_CUBIC=y
 CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
 # CONFIG_NETWORK_SECMARK is not set
 # CONFIG_NETFILTER is not set
 # CONFIG_IP_DCCP is not set
@@ -308,7 +338,9 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # Network testing
 #
 # CONFIG_NET_PKTGEN is not set
+# CONFIG_NET_TCPPROBE is not set
 # CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
@@ -334,12 +366,15 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_DEBUG_DRIVER is not set
 # CONFIG_DEBUG_DEVRES is not set
 # CONFIG_SYS_HYPERVISOR is not set
 # CONFIG_CONNECTOR is not set
 # CONFIG_MTD is not set
 CONFIG_OF_DEVICE=y
+CONFIG_OF_I2C=y
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_FD is not set
@@ -354,24 +389,30 @@ CONFIG_BLK_DEV=y
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=8192
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_PHANTOM is not set
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_HP_ILO is not set
+CONFIG_HAVE_IDE=y
 CONFIG_IDE=y
 CONFIG_BLK_DEV_IDE=y
 
 #
-# Please see Documentation/ide.txt for help/info on IDE drives
+# Please see Documentation/ide/ide.txt for help/info on IDE drives
 #
+CONFIG_IDE_TIMINGS=y
 # CONFIG_BLK_DEV_IDE_SATA is not set
 CONFIG_BLK_DEV_IDEDISK=y
 # CONFIG_IDEDISK_MULTI_MODE is not set
 CONFIG_BLK_DEV_IDECD=y
+CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y
 # CONFIG_BLK_DEV_IDETAPE is not set
 # CONFIG_BLK_DEV_IDEFLOPPY is not set
 # CONFIG_BLK_DEV_IDESCSI is not set
@@ -381,14 +422,13 @@ CONFIG_IDE_PROC_FS=y
 #
 # IDE chipset support/bugfixes
 #
-CONFIG_IDE_GENERIC=y
 # CONFIG_BLK_DEV_PLATFORM is not set
+CONFIG_BLK_DEV_IDEDMA_SFF=y
 
 #
 # PCI IDE chipsets support
 #
 CONFIG_BLK_DEV_IDEPCI=y
-CONFIG_IDEPCI_SHARE_IRQ=y
 CONFIG_IDEPCI_PCIBUS_ORDER=y
 # CONFIG_BLK_DEV_OFFBOARD is not set
 CONFIG_BLK_DEV_GENERIC=y
@@ -399,10 +439,8 @@ CONFIG_BLK_DEV_IDEDMA_PCI=y
 CONFIG_BLK_DEV_AMD74XX=y
 # CONFIG_BLK_DEV_CMD64X is not set
 # CONFIG_BLK_DEV_TRIFLEX is not set
-# CONFIG_BLK_DEV_CY82C693 is not set
 # CONFIG_BLK_DEV_CS5520 is not set
 # CONFIG_BLK_DEV_CS5530 is not set
-# CONFIG_BLK_DEV_HPT34X is not set
 # CONFIG_BLK_DEV_HPT366 is not set
 # CONFIG_BLK_DEV_JMICRON is not set
 # CONFIG_BLK_DEV_SC1200 is not set
@@ -419,10 +457,7 @@ CONFIG_BLK_DEV_AMD74XX=y
 # CONFIG_BLK_DEV_TRM290 is not set
 # CONFIG_BLK_DEV_VIA82CXXX is not set
 # CONFIG_BLK_DEV_TC86C001 is not set
-# CONFIG_IDE_ARM is not set
 CONFIG_BLK_DEV_IDEDMA=y
-CONFIG_IDE_ARCH_OBSOLETE_INIT=y
-# CONFIG_BLK_DEV_HD is not set
 
 #
 # SCSI device support
@@ -483,6 +518,7 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_IPS is not set
 # CONFIG_SCSI_INITIO is not set
 # CONFIG_SCSI_INIA100 is not set
+# CONFIG_SCSI_MVSAS is not set
 # CONFIG_SCSI_STEX is not set
 # CONFIG_SCSI_SYM53C8XX_2 is not set
 CONFIG_SCSI_IPR=y
@@ -496,9 +532,13 @@ CONFIG_SCSI_IPR_DUMP=y
 # CONFIG_SCSI_DC390T is not set
 # CONFIG_SCSI_DEBUG is not set
 # CONFIG_SCSI_SRP is not set
+# CONFIG_SCSI_DH is not set
 CONFIG_ATA=y
 CONFIG_ATA_NONSTANDARD=y
+CONFIG_SATA_PMP=y
 # CONFIG_SATA_AHCI is not set
+# CONFIG_SATA_SIL24 is not set
+CONFIG_ATA_SFF=y
 # CONFIG_SATA_SVW is not set
 # CONFIG_ATA_PIIX is not set
 # CONFIG_SATA_MV is not set
@@ -508,7 +548,6 @@ CONFIG_ATA_NONSTANDARD=y
 # CONFIG_SATA_PROMISE is not set
 # CONFIG_SATA_SX4 is not set
 # CONFIG_SATA_SIL is not set
-# CONFIG_SATA_SIL24 is not set
 # CONFIG_SATA_SIS is not set
 # CONFIG_SATA_ULI is not set
 # CONFIG_SATA_VIA is not set
@@ -537,6 +576,7 @@ CONFIG_ATA_NONSTANDARD=y
 # CONFIG_PATA_MPIIX is not set
 # CONFIG_PATA_OLDPIIX is not set
 # CONFIG_PATA_NETCELL is not set
+# CONFIG_PATA_NINJA32 is not set
 # CONFIG_PATA_NS87410 is not set
 # CONFIG_PATA_NS87415 is not set
 # CONFIG_PATA_OPTI is not set
@@ -551,27 +591,47 @@ CONFIG_ATA_NONSTANDARD=y
 # CONFIG_PATA_SIS is not set
 # CONFIG_PATA_VIA is not set
 # CONFIG_PATA_WINBOND is not set
+# CONFIG_PATA_PLATFORM is not set
+# CONFIG_PATA_SCH is not set
 # CONFIG_MD is not set
 # CONFIG_FUSION is not set
 
 #
 # IEEE 1394 (FireWire) support
 #
+
+#
+# Enable only one of the two stacks, unless you know what you are doing
+#
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
 # CONFIG_EQUALIZER is not set
 # CONFIG_TUN is not set
 # CONFIG_VETH is not set
-# CONFIG_IP1000 is not set
 # CONFIG_ARCNET is not set
-# CONFIG_PHYLIB is not set
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+# CONFIG_MARVELL_PHY is not set
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+# CONFIG_SMSC_PHY is not set
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
+# CONFIG_FIXED_PHY is not set
+# CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
 # CONFIG_HAPPYMEAL is not set
@@ -587,7 +647,6 @@ CONFIG_MII=y
 CONFIG_NET_PCI=y
 # CONFIG_PCNET32 is not set
 CONFIG_AMD8111_ETH=y
-# CONFIG_AMD8111E_NAPI is not set
 # CONFIG_ADAPTEC_STARFIRE is not set
 # CONFIG_B44 is not set
 # CONFIG_FORCEDETH is not set
@@ -598,18 +657,21 @@ CONFIG_AMD8111_ETH=y
 # CONFIG_NE2K_PCI is not set
 # CONFIG_8139CP is not set
 # CONFIG_8139TOO is not set
+# CONFIG_R6040 is not set
 # CONFIG_SIS900 is not set
 # CONFIG_EPIC100 is not set
 # CONFIG_SUNDANCE is not set
+# CONFIG_TLAN is not set
 # CONFIG_VIA_RHINE is not set
 # CONFIG_SC92031 is not set
 CONFIG_NETDEV_1000=y
 # CONFIG_ACENIC is not set
 # CONFIG_DL2K is not set
 CONFIG_E1000=y
-# CONFIG_E1000_NAPI is not set
 # CONFIG_E1000_DISABLE_PACKET_SPLIT is not set
 # CONFIG_E1000E is not set
+# CONFIG_IP1000 is not set
+# CONFIG_IGB is not set
 # CONFIG_NS83820 is not set
 # CONFIG_HAMACHI is not set
 # CONFIG_YELLOWFIN is not set
@@ -617,12 +679,12 @@ CONFIG_E1000=y
 # CONFIG_SIS190 is not set
 # CONFIG_SKGE is not set
 # CONFIG_SKY2 is not set
-# CONFIG_SK98LIN is not set
 # CONFIG_VIA_VELOCITY is not set
 CONFIG_TIGON3=y
 # CONFIG_BNX2 is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
+# CONFIG_ATL1E is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
 # CONFIG_CHELSIO_T3 is not set
@@ -632,9 +694,10 @@ CONFIG_NETDEV_10000=y
 # CONFIG_MYRI10GE is not set
 # CONFIG_NETXEN_NIC is not set
 # CONFIG_NIU is not set
-# CONFIG_PASEMI_MAC is not set
 # CONFIG_MLX4_CORE is not set
 # CONFIG_TEHUTI is not set
+# CONFIG_BNX2X is not set
+# CONFIG_SFC is not set
 # CONFIG_TR is not set
 
 #
@@ -642,6 +705,7 @@ CONFIG_NETDEV_10000=y
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
 
 #
 # USB Network Adapters
@@ -657,7 +721,6 @@ CONFIG_USB_PEGASUS=y
 # CONFIG_PPP is not set
 # CONFIG_SLIP is not set
 # CONFIG_NET_FC is not set
-# CONFIG_SHAPER is not set
 # CONFIG_NETCONSOLE is not set
 # CONFIG_NETPOLL is not set
 # CONFIG_NET_POLL_CONTROLLER is not set
@@ -702,10 +765,13 @@ CONFIG_INPUT_MOUSEDEV_SCREEN_Y=1200
 # Character devices
 #
 CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
 # CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
 # CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_NOZOMI is not set
 
 #
 # Serial drivers
@@ -742,16 +808,14 @@ CONFIG_DEVPORT=y
 CONFIG_I2C=y
 CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
 
 #
-# I2C Algorithms
+# I2C Hardware Bus support
 #
-CONFIG_I2C_ALGOBIT=y
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
 
 #
-# I2C Hardware Bus support
+# PC SMBus host controller drivers
 #
 # CONFIG_I2C_ALI1535 is not set
 # CONFIG_I2C_ALI1563 is not set
@@ -759,32 +823,47 @@ CONFIG_I2C_ALGOBIT=y
 # CONFIG_I2C_AMD756 is not set
 CONFIG_I2C_AMD8111=y
 # CONFIG_I2C_I801 is not set
-# CONFIG_I2C_I810 is not set
+# CONFIG_I2C_ISCH is not set
 # CONFIG_I2C_PIIX4 is not set
 # CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_PROSAVAGE is not set
-# CONFIG_I2C_SAVAGE4 is not set
-# CONFIG_I2C_SIMTEC is not set
 # CONFIG_I2C_SIS5595 is not set
 # CONFIG_I2C_SIS630 is not set
 # CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_TINY_USB is not set
 # CONFIG_I2C_VIA is not set
 # CONFIG_I2C_VIAPRO is not set
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Graphics adapter I2C/DDC channel drivers
+#
 # CONFIG_I2C_VOODOO3 is not set
 
 #
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
+
+#
 # Miscellaneous I2C Chip support
 #
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
 # CONFIG_DS1682 is not set
+# CONFIG_AT24 is not set
 # CONFIG_SENSORS_EEPROM is not set
 # CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_MAX6875 is not set
@@ -793,15 +872,14 @@ CONFIG_I2C_AMD8111=y
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# SPI support
-#
 # CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+# CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
 
 #
@@ -813,13 +891,25 @@ CONFIG_SSB_POSSIBLE=y
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
 
 #
 # Multimedia devices
 #
+
+#
+# Multimedia core support
+#
 # CONFIG_VIDEO_DEV is not set
 # CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
 # CONFIG_DAB is not set
 
 #
@@ -842,10 +932,6 @@ CONFIG_SSB_POSSIBLE=y
 #
 # CONFIG_VGA_CONSOLE is not set
 CONFIG_DUMMY_CONSOLE=y
-
-#
-# Sound
-#
 # CONFIG_SOUND is not set
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
@@ -865,6 +951,7 @@ CONFIG_USB_ARCH_HAS_OHCI=y
 CONFIG_USB_ARCH_HAS_EHCI=y
 CONFIG_USB=y
 # CONFIG_USB_DEBUG is not set
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
 
 #
 # Miscellaneous USB options
@@ -873,15 +960,18 @@ CONFIG_USB_DEVICEFS=y
 CONFIG_USB_DEVICE_CLASS=y
 # CONFIG_USB_DYNAMIC_MINORS is not set
 # CONFIG_USB_OTG is not set
+CONFIG_USB_MON=y
 
 #
 # USB Host Controller Drivers
 #
+# CONFIG_USB_C67X00_HCD is not set
 CONFIG_USB_EHCI_HCD=y
-CONFIG_USB_EHCI_SPLIT_ISO=y
 CONFIG_USB_EHCI_ROOT_HUB_TT=y
 # CONFIG_USB_EHCI_TT_NEWSCHED is not set
+# CONFIG_USB_EHCI_HCD_PPC_OF is not set
 # CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
 CONFIG_USB_OHCI_HCD=y
 # CONFIG_USB_OHCI_HCD_PPC_OF is not set
 # CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
@@ -896,6 +986,7 @@ CONFIG_USB_UHCI_HCD=y
 #
 # CONFIG_USB_ACM is not set
 # CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
 
 #
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
@@ -912,20 +1003,15 @@ CONFIG_USB_UHCI_HCD=y
 #
 # CONFIG_USB_MDC800 is not set
 # CONFIG_USB_MICROTEK is not set
-CONFIG_USB_MON=y
 
 #
 # USB port drivers
 #
-
-#
-# USB Serial Converter support
-#
 CONFIG_USB_SERIAL=y
 # CONFIG_USB_SERIAL_CONSOLE is not set
+CONFIG_USB_EZUSB=y
 CONFIG_USB_SERIAL_GENERIC=y
 # CONFIG_USB_SERIAL_AIRCABLE is not set
-# CONFIG_USB_SERIAL_AIRPRIME is not set
 # CONFIG_USB_SERIAL_ARK3116 is not set
 # CONFIG_USB_SERIAL_BELKIN is not set
 # CONFIG_USB_SERIAL_CH341 is not set
@@ -943,6 +1029,7 @@ CONFIG_USB_SERIAL_CYPRESS_M8=m
 # CONFIG_USB_SERIAL_EDGEPORT_TI is not set
 CONFIG_USB_SERIAL_GARMIN=m
 CONFIG_USB_SERIAL_IPW=m
+# CONFIG_USB_SERIAL_IUU is not set
 # CONFIG_USB_SERIAL_KEYSPAN_PDA is not set
 CONFIG_USB_SERIAL_KEYSPAN=y
 CONFIG_USB_SERIAL_KEYSPAN_MPR=y
@@ -962,9 +1049,11 @@ CONFIG_USB_SERIAL_KEYSPAN_USA49WLC=y
 # CONFIG_USB_SERIAL_MCT_U232 is not set
 # CONFIG_USB_SERIAL_MOS7720 is not set
 # CONFIG_USB_SERIAL_MOS7840 is not set
+# CONFIG_USB_SERIAL_MOTOROLA is not set
 # CONFIG_USB_SERIAL_NAVMAN is not set
 # CONFIG_USB_SERIAL_PL2303 is not set
 # CONFIG_USB_SERIAL_OTI6858 is not set
+# CONFIG_USB_SERIAL_SPCP8X5 is not set
 # CONFIG_USB_SERIAL_HP4X is not set
 # CONFIG_USB_SERIAL_SAFE is not set
 # CONFIG_USB_SERIAL_SIERRAWIRELESS is not set
@@ -974,7 +1063,6 @@ CONFIG_USB_SERIAL_TI=m
 # CONFIG_USB_SERIAL_OPTION is not set
 # CONFIG_USB_SERIAL_OMNINET is not set
 # CONFIG_USB_SERIAL_DEBUG is not set
-CONFIG_USB_EZUSB=y
 
 #
 # USB Miscellaneous drivers
@@ -982,7 +1070,6 @@ CONFIG_USB_EZUSB=y
 # CONFIG_USB_EMI62 is not set
 # CONFIG_USB_EMI26 is not set
 # CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_AUERSWALD is not set
 # CONFIG_USB_RIO500 is not set
 # CONFIG_USB_LEGOTOWER is not set
 # CONFIG_USB_LCD is not set
@@ -999,24 +1086,16 @@ CONFIG_USB_EZUSB=y
 # CONFIG_USB_TRANCEVIBRATOR is not set
 # CONFIG_USB_IOWARRIOR is not set
 # CONFIG_USB_TEST is not set
-
-#
-# USB DSL modem support
-#
-
-#
-# USB Gadget Support
-#
+# CONFIG_USB_ISIGHTFW is not set
 # CONFIG_USB_GADGET is not set
 # CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
 # CONFIG_INFINIBAND is not set
 # CONFIG_EDAC is not set
 # CONFIG_RTC_CLASS is not set
-
-#
-# Userspace I/O
-#
+# CONFIG_DMADEVICES is not set
 # CONFIG_UIO is not set
 
 #
@@ -1037,12 +1116,10 @@ CONFIG_FS_POSIX_ACL=y
 # CONFIG_XFS_FS is not set
 # CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
+CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
 # CONFIG_FUSE_FS is not set
@@ -1088,8 +1165,11 @@ CONFIG_HUGETLB_PAGE=y
 # CONFIG_EFS_FS is not set
 CONFIG_CRAMFS=y
 # CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
@@ -1097,16 +1177,14 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 CONFIG_NFS_V3_ACL=y
 CONFIG_NFS_V4=y
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_NFS_ACL_SUPPORT=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_BIND34 is not set
 CONFIG_RPCSEC_GSS_KRB5=y
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -1177,14 +1255,15 @@ CONFIG_NLS_DEFAULT="utf-8"
 # CONFIG_NLS_KOI8_U is not set
 CONFIG_NLS_UTF8=y
 # CONFIG_DLM is not set
-# CONFIG_UCC_SLOW is not set
 
 #
 # Library routines
 #
 CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
 CONFIG_CRC_CCITT=y
 # CONFIG_CRC16 is not set
+CONFIG_CRC_T10DIF=y
 # CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
@@ -1194,7 +1273,7 @@ CONFIG_PLIST=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
-# CONFIG_INSTRUMENTATION is not set
+CONFIG_HAVE_LMB=y
 
 #
 # Kernel hacking
@@ -1202,6 +1281,7 @@ CONFIG_HAS_DMA=y
 # CONFIG_PRINTK_TIME is not set
 CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=2048
 CONFIG_MAGIC_SYSRQ=y
 # CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_FS=y
@@ -1209,34 +1289,59 @@ CONFIG_DEBUG_FS=y
 CONFIG_DEBUG_KERNEL=y
 # CONFIG_DEBUG_SHIRQ is not set
 CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
 CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
+CONFIG_SCHEDSTATS=y
 # CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
 # CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
 # CONFIG_DEBUG_RT_MUTEXES is not set
 # CONFIG_RT_MUTEX_TESTER is not set
 # CONFIG_DEBUG_SPINLOCK is not set
 # CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
 CONFIG_DEBUG_SPINLOCK_SLEEP=y
 # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+CONFIG_STACKTRACE=y
 # CONFIG_DEBUG_KOBJECT is not set
 CONFIG_DEBUG_BUGVERBOSE=y
 # CONFIG_DEBUG_INFO is not set
 # CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+CONFIG_DEBUG_MEMORY_INIT=y
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
-# CONFIG_FORCED_INLINING is not set
+CONFIG_FRAME_POINTER=y
 # CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_KPROBES_SANITY_TEST is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_LKDTM is not set
 # CONFIG_FAULT_INJECTION is not set
+CONFIG_LATENCYTOP=y
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
+CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+# CONFIG_FTRACE is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
 # CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
 CONFIG_DEBUG_STACKOVERFLOW=y
 CONFIG_DEBUG_STACK_USAGE=y
 # CONFIG_DEBUG_PAGEALLOC is not set
-CONFIG_DEBUGGER=y
+# CONFIG_CODE_PATCHING_SELFTEST is not set
+# CONFIG_FTR_FIXUP_SELFTEST is not set
 CONFIG_XMON=y
 CONFIG_XMON_DEFAULT=y
 CONFIG_XMON_DISASSEMBLY=y
+CONFIG_DEBUGGER=y
 # CONFIG_IRQSTACKS is not set
 # CONFIG_VIRQ_DEBUG is not set
 CONFIG_BOOTX_TEXT=y
@@ -1249,44 +1354,84 @@ CONFIG_BOOTX_TEXT=y
 # CONFIG_SECURITY is not set
 # CONFIG_SECURITY_FILE_CAPABILITIES is not set
 CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
 CONFIG_CRYPTO_ALGAPI=y
 CONFIG_CRYPTO_BLKCIPHER=y
 CONFIG_CRYPTO_MANAGER=y
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=m
+# CONFIG_CRYPTO_LRW is not set
+CONFIG_CRYPTO_PCBC=m
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
 # CONFIG_CRYPTO_HMAC is not set
 # CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_NULL is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
 # CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
 # CONFIG_CRYPTO_SHA1 is not set
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
 # CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-CONFIG_CRYPTO_ECB=m
-CONFIG_CRYPTO_CBC=y
-CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_XTS is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
 # CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
 # CONFIG_CRYPTO_CAST5 is not set
 # CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
 # CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_SALSA20 is not set
 # CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
 # CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_TEST is not set
-# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_LZO is not set
 # CONFIG_CRYPTO_HW is not set
 # CONFIG_PPC_CLOCK is not set
+# CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/mpc7448_hpc2_defconfig b/arch/powerpc/configs/mpc7448_hpc2_defconfig
index 066c583c1f8a..ab5199f26a24 100644
--- a/arch/powerpc/configs/mpc7448_hpc2_defconfig
+++ b/arch/powerpc/configs/mpc7448_hpc2_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc5
-# Mon Jun  9 08:52:11 2008
+# Linux kernel version: 2.6.27-rc4
+# Thu Aug 21 00:52:06 2008
 #
 # CONFIG_PPC64 is not set
 
@@ -32,6 +32,7 @@ CONFIG_GENERIC_HARDIRQS=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
@@ -88,7 +89,6 @@ CONFIG_INITRAMFS_SOURCE=""
 CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
 CONFIG_HOTPLUG=y
@@ -112,10 +112,16 @@ CONFIG_SLUB=y
 # CONFIG_PROFILING is not set
 # CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
+CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
 # CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+# CONFIG_HAVE_CLK is not set
 CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
@@ -126,6 +132,7 @@ CONFIG_LBD=y
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -145,25 +152,25 @@ CONFIG_CLASSIC_RCU=y
 # Platform support
 #
 CONFIG_PPC_MULTIPLATFORM=y
-# CONFIG_PPC_82xx is not set
-# CONFIG_PPC_83xx is not set
-# CONFIG_PPC_86xx is not set
 CONFIG_CLASSIC32=y
 # CONFIG_PPC_CHRP is not set
-# CONFIG_PPC_MPC512x is not set
-# CONFIG_PPC_MPC5121 is not set
 # CONFIG_MPC5121_ADS is not set
+# CONFIG_MPC5121_GENERIC is not set
 # CONFIG_PPC_MPC52xx is not set
 # CONFIG_PPC_PMAC is not set
 # CONFIG_PPC_CELL is not set
 # CONFIG_PPC_CELL_NATIVE is not set
+# CONFIG_PPC_82xx is not set
 # CONFIG_PQ2ADS is not set
+# CONFIG_PPC_83xx is not set
+# CONFIG_PPC_86xx is not set
 CONFIG_EMBEDDED6xx=y
 # CONFIG_LINKSTATION is not set
 # CONFIG_STORCENTER is not set
 CONFIG_MPC7448HPC2=y
 # CONFIG_PPC_HOLLY is not set
 # CONFIG_PPC_PRPMC2800 is not set
+# CONFIG_PPC_C2K is not set
 CONFIG_TSI108_BRIDGE=y
 # CONFIG_IPIC is not set
 CONFIG_MPIC=y
@@ -192,7 +199,7 @@ CONFIG_HZ_250=y
 # CONFIG_HZ_300 is not set
 # CONFIG_HZ_1000 is not set
 CONFIG_HZ=250
-# CONFIG_SCHED_HRTICK is not set
+CONFIG_SCHED_HRTICK=y
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
@@ -215,6 +222,7 @@ CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_MIGRATION=y
 # CONFIG_RESOURCES_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
@@ -222,6 +230,7 @@ CONFIG_VIRT_TO_BUS=y
 CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
+CONFIG_EXTRA_TARGETS=""
 # CONFIG_PM is not set
 # CONFIG_SECCOMP is not set
 CONFIG_ISA_DMA_API=y
@@ -256,10 +265,6 @@ CONFIG_PAGE_OFFSET=0xc0000000
 CONFIG_KERNEL_START=0xc0000000
 CONFIG_PHYSICAL_START=0x00000000
 CONFIG_TASK_SIZE=0xc0000000
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -374,12 +379,14 @@ CONFIG_BLK_DEV_RAM_SIZE=131072
 # CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_PHANTOM is not set
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_HP_ILO is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -457,6 +464,7 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_NSP32 is not set
 # CONFIG_SCSI_DEBUG is not set
 # CONFIG_SCSI_SRP is not set
+# CONFIG_SCSI_DH is not set
 CONFIG_ATA=y
 # CONFIG_ATA_NONSTANDARD is not set
 CONFIG_SATA_PMP=y
@@ -523,12 +531,15 @@ CONFIG_SATA_MV=y
 #
 # IEEE 1394 (FireWire) support
 #
+
+#
+# Enable only one of the two stacks, unless you know what you are doing
+#
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -594,7 +605,6 @@ CONFIG_NETDEV_1000=y
 # CONFIG_DL2K is not set
 # CONFIG_E1000 is not set
 # CONFIG_E1000E is not set
-# CONFIG_E1000E_ENABLED is not set
 # CONFIG_IP1000 is not set
 # CONFIG_IGB is not set
 # CONFIG_NS83820 is not set
@@ -611,6 +621,7 @@ CONFIG_TSI108_ETH=y
 # CONFIG_MV643XX_ETH is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
+# CONFIG_ATL1E is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
 # CONFIG_CHELSIO_T3 is not set
@@ -716,6 +727,8 @@ CONFIG_GEN_RTC=y
 CONFIG_DEVPORT=y
 # CONFIG_I2C is not set
 # CONFIG_SPI is not set
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+# CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 CONFIG_HWMON=y
@@ -736,6 +749,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_W83627EHF is not set
 # CONFIG_HWMON_DEBUG_CHIP is not set
 # CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
 
 #
@@ -747,8 +761,10 @@ CONFIG_SSB_POSSIBLE=y
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
 
 #
 # Multimedia devices
@@ -780,10 +796,6 @@ CONFIG_VIDEO_OUTPUT_CONTROL=y
 # Display device support
 #
 # CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Sound
-#
 # CONFIG_SOUND is not set
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
@@ -798,6 +810,10 @@ CONFIG_USB_ARCH_HAS_EHCI=y
 # CONFIG_USB_OTG_BLACKLIST_HUB is not set
 
 #
+# Enable Host or Gadget support to see Inventra options
+#
+
+#
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
 #
 # CONFIG_USB_GADGET is not set
@@ -875,6 +891,7 @@ CONFIG_TMPFS=y
 # CONFIG_CRAMFS is not set
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
 # CONFIG_ROMFS_FS is not set
@@ -884,12 +901,11 @@ CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 # CONFIG_NFS_V3 is not set
 # CONFIG_NFS_V4 is not set
-# CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
 CONFIG_LOCKD=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -929,6 +945,7 @@ CONFIG_BITREVERSE=y
 # CONFIG_GENERIC_FIND_FIRST_BIT is not set
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
+CONFIG_CRC_T10DIF=y
 # CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
@@ -954,7 +971,16 @@ CONFIG_FRAME_WARN=1024
 # CONFIG_SLUB_DEBUG_ON is not set
 # CONFIG_SLUB_STATS is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+# CONFIG_FTRACE is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
 # CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_IRQSTACKS is not set
 # CONFIG_BOOTX_TEXT is not set
 # CONFIG_PPC_EARLY_DEBUG is not set
@@ -1007,6 +1033,10 @@ CONFIG_CRYPTO=y
 # CONFIG_CRYPTO_MD4 is not set
 # CONFIG_CRYPTO_MD5 is not set
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
 # CONFIG_CRYPTO_SHA1 is not set
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
diff --git a/arch/powerpc/configs/mpc8272_ads_defconfig b/arch/powerpc/configs/mpc8272_ads_defconfig
index 30d7834b7db1..7c435c84c875 100644
--- a/arch/powerpc/configs/mpc8272_ads_defconfig
+++ b/arch/powerpc/configs/mpc8272_ads_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc5
-# Mon Jun  9 08:52:12 2008
+# Linux kernel version: 2.6.27-rc4
+# Thu Aug 21 00:52:07 2008
 #
 # CONFIG_PPC64 is not set
 
@@ -15,6 +15,7 @@ CONFIG_6xx=y
 # CONFIG_44x is not set
 # CONFIG_E200 is not set
 CONFIG_PPC_FPU=y
+# CONFIG_ALTIVEC is not set
 CONFIG_PPC_STD_MMU=y
 CONFIG_PPC_STD_MMU_32=y
 # CONFIG_PPC_MM_SLICES is not set
@@ -31,12 +32,14 @@ CONFIG_GENERIC_HARDIRQS=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_GENERIC_GPIO=y
 # CONFIG_ARCH_NO_VIRT_TO_BUS is not set
 CONFIG_PPC=y
 CONFIG_EARLY_PRINTK=y
@@ -45,11 +48,13 @@ CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
 CONFIG_ARCH_MAY_HAVE_PC_FDC=y
 CONFIG_PPC_OF=y
 CONFIG_OF=y
-# CONFIG_PPC_UDBG_16550 is not set
+CONFIG_PPC_UDBG_16550=y
 # CONFIG_GENERIC_TBSYNC is not set
 CONFIG_AUDIT_ARCH=y
 CONFIG_GENERIC_BUG=y
 CONFIG_DEFAULT_UIMAGE=y
+CONFIG_HIBERNATE_32=y
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
@@ -81,7 +86,6 @@ CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
@@ -89,6 +93,7 @@ CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
+CONFIG_PCSPKR_PLATFORM=y
 CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
@@ -106,10 +111,16 @@ CONFIG_SLUB=y
 # CONFIG_PROFILING is not set
 # CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
+CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
 # CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+CONFIG_HAVE_CLK=y
 CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
@@ -119,6 +130,7 @@ CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -137,14 +149,16 @@ CONFIG_CLASSIC_RCU=y
 #
 # Platform support
 #
-# CONFIG_PPC_MULTIPLATFORM is not set
-CONFIG_PPC_82xx=y
-# CONFIG_PPC_83xx is not set
-# CONFIG_PPC_86xx is not set
-# CONFIG_PPC_MPC512x is not set
-# CONFIG_PPC_MPC5121 is not set
+CONFIG_PPC_MULTIPLATFORM=y
+CONFIG_CLASSIC32=y
+CONFIG_PPC_CHRP=y
+# CONFIG_MPC5121_ADS is not set
+# CONFIG_MPC5121_GENERIC is not set
+# CONFIG_PPC_MPC52xx is not set
+CONFIG_PPC_PMAC=y
 # CONFIG_PPC_CELL is not set
 # CONFIG_PPC_CELL_NATIVE is not set
+CONFIG_PPC_82xx=y
 CONFIG_MPC8272_ADS=y
 # CONFIG_PQ2FADS is not set
 # CONFIG_EP8248E is not set
@@ -152,19 +166,27 @@ CONFIG_PQ2ADS=y
 CONFIG_8260=y
 CONFIG_8272=y
 CONFIG_PQ2_ADS_PCI_PIC=y
+# CONFIG_PPC_83xx is not set
+# CONFIG_PPC_86xx is not set
+# CONFIG_EMBEDDED6xx is not set
+CONFIG_PPC_NATIVE=y
+# CONFIG_UDBG_RTAS_CONSOLE is not set
 # CONFIG_IPIC is not set
-# CONFIG_MPIC is not set
+CONFIG_MPIC=y
 # CONFIG_MPIC_WEIRD is not set
-# CONFIG_PPC_I8259 is not set
-# CONFIG_PPC_RTAS is not set
+CONFIG_PPC_I8259=y
+CONFIG_PPC_RTAS=y
+# CONFIG_RTAS_ERROR_LOGGING is not set
+CONFIG_RTAS_PROC=y
 # CONFIG_MMIO_NVRAM is not set
-# CONFIG_PPC_MPC106 is not set
+CONFIG_PPC_MPC106=y
 # CONFIG_PPC_970_NAP is not set
 # CONFIG_PPC_INDIRECT_IO is not set
 # CONFIG_GENERIC_IOMAP is not set
 # CONFIG_CPU_FREQ is not set
+# CONFIG_PPC601_SYNC_FIX is not set
+# CONFIG_TAU is not set
 CONFIG_CPM2=y
-CONFIG_PPC_CPM_NEW_BINDING=y
 # CONFIG_FSL_ULI1575 is not set
 CONFIG_CPM=y
 
@@ -181,7 +203,7 @@ CONFIG_HZ_250=y
 # CONFIG_HZ_300 is not set
 # CONFIG_HZ_1000 is not set
 CONFIG_HZ=250
-# CONFIG_SCHED_HRTICK is not set
+CONFIG_SCHED_HRTICK=y
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
@@ -199,6 +221,7 @@ CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_MIGRATION=y
 # CONFIG_RESOURCES_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
@@ -206,6 +229,7 @@ CONFIG_VIRT_TO_BUS=y
 CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
+CONFIG_EXTRA_TARGETS=""
 # CONFIG_PM is not set
 CONFIG_SECCOMP=y
 CONFIG_ISA_DMA_API=y
@@ -213,9 +237,11 @@ CONFIG_ISA_DMA_API=y
 #
 # Bus options
 #
+# CONFIG_ISA is not set
 CONFIG_ZONE_DMA=y
 CONFIG_PPC_INDIRECT_PCI=y
 CONFIG_FSL_SOC=y
+CONFIG_PPC_PCI_CHOICE=y
 CONFIG_PCI=y
 CONFIG_PCI_DOMAINS=y
 CONFIG_PCI_SYSCALL=y
@@ -242,10 +268,6 @@ CONFIG_PAGE_OFFSET=0xc0000000
 CONFIG_KERNEL_START=0xc0000000
 CONFIG_PHYSICAL_START=0x00000000
 CONFIG_TASK_SIZE=0xc0000000
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -446,9 +468,11 @@ CONFIG_MTD_PHYSMAP_OF=y
 #
 # CONFIG_MTD_UBI is not set
 CONFIG_OF_DEVICE=y
+CONFIG_OF_GPIO=y
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_FD is not set
+# CONFIG_MAC_FLOPPY is not set
 # CONFIG_BLK_CPQ_DA is not set
 # CONFIG_BLK_CPQ_CISS_DA is not set
 # CONFIG_BLK_DEV_DAC960 is not set
@@ -460,6 +484,7 @@ CONFIG_BLK_DEV_LOOP=y
 # CONFIG_BLK_DEV_RAM is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
 # CONFIG_MISC_DEVICES is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
@@ -480,13 +505,12 @@ CONFIG_HAVE_IDE=y
 #
 
 #
-# An alternative FireWire stack is available with EXPERIMENTAL=y
+# A new alternative FireWire stack is available with EXPERIMENTAL=y
 #
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_EQUALIZER is not set
@@ -510,8 +534,11 @@ CONFIG_DAVICOM_PHY=y
 # CONFIG_REALTEK_PHY is not set
 # CONFIG_FIXED_PHY is not set
 CONFIG_MDIO_BITBANG=y
+# CONFIG_MDIO_OF_GPIO is not set
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
+# CONFIG_MACE is not set
+# CONFIG_BMAC is not set
 # CONFIG_HAPPYMEAL is not set
 # CONFIG_SUNGEM is not set
 # CONFIG_CASSINI is not set
@@ -533,7 +560,6 @@ CONFIG_NETDEV_1000=y
 # CONFIG_DL2K is not set
 # CONFIG_E1000 is not set
 # CONFIG_E1000E is not set
-# CONFIG_E1000E_ENABLED is not set
 # CONFIG_IGB is not set
 # CONFIG_NS83820 is not set
 # CONFIG_HAMACHI is not set
@@ -545,6 +571,7 @@ CONFIG_NETDEV_1000=y
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
 # CONFIG_GIANFAR is not set
+# CONFIG_MV643XX_ETH is not set
 # CONFIG_QLA3XXX is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
@@ -610,6 +637,7 @@ CONFIG_KEYBOARD_ATKBD=y
 # CONFIG_KEYBOARD_XTKBD is not set
 # CONFIG_KEYBOARD_NEWTON is not set
 # CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_GPIO is not set
 CONFIG_INPUT_MOUSE=y
 CONFIG_MOUSE_PS2=y
 CONFIG_MOUSE_PS2_ALPS=y
@@ -620,6 +648,7 @@ CONFIG_MOUSE_PS2_TRACKPOINT=y
 # CONFIG_MOUSE_PS2_TOUCHKIT is not set
 # CONFIG_MOUSE_SERIAL is not set
 # CONFIG_MOUSE_VSXXXAA is not set
+# CONFIG_MOUSE_GPIO is not set
 # CONFIG_INPUT_JOYSTICK is not set
 # CONFIG_INPUT_TABLET is not set
 # CONFIG_INPUT_TOUCHSCREEN is not set
@@ -634,6 +663,7 @@ CONFIG_SERIO_SERPORT=y
 # CONFIG_SERIO_PCIPS2 is not set
 CONFIG_SERIO_LIBPS2=y
 # CONFIG_SERIO_RAW is not set
+# CONFIG_SERIO_XILINX_XPS_PS2 is not set
 # CONFIG_GAMEPORT is not set
 
 #
@@ -654,6 +684,7 @@ CONFIG_DEVKMEM=y
 # CONFIG_SERIAL_UARTLITE is not set
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_PMACZILOG is not set
 CONFIG_SERIAL_CPM=y
 CONFIG_SERIAL_CPM_CONSOLE=y
 CONFIG_SERIAL_CPM_SCC1=y
@@ -666,6 +697,8 @@ CONFIG_SERIAL_CPM_SCC4=y
 CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_BRIQ_PANEL is not set
+# CONFIG_HVC_RTAS is not set
 # CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
 # CONFIG_NVRAM is not set
@@ -676,10 +709,28 @@ CONFIG_HW_RANDOM=y
 CONFIG_DEVPORT=y
 # CONFIG_I2C is not set
 # CONFIG_SPI is not set
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+
+#
+# I2C GPIO expanders:
+#
+
+#
+# PCI GPIO expanders:
+#
+# CONFIG_GPIO_BT8XX is not set
+
+#
+# SPI GPIO expanders:
+#
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 # CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
 
 #
@@ -691,8 +742,10 @@ CONFIG_SSB_POSSIBLE=y
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
 
 #
 # Multimedia devices
@@ -724,10 +777,6 @@ CONFIG_DAB=y
 # Display device support
 #
 # CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Sound
-#
 # CONFIG_SOUND is not set
 # CONFIG_HID_SUPPORT is not set
 # CONFIG_USB_SUPPORT is not set
@@ -798,6 +847,7 @@ CONFIG_TMPFS=y
 CONFIG_CRAMFS=y
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
 # CONFIG_ROMFS_FS is not set
@@ -807,8 +857,8 @@ CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 CONFIG_NFS_V3_ACL=y
-# CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_NFS_ACL_SUPPORT=y
@@ -888,6 +938,7 @@ CONFIG_BITREVERSE=y
 # CONFIG_GENERIC_FIND_FIRST_BIT is not set
 CONFIG_CRC_CCITT=y
 # CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
 # CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
@@ -914,6 +965,8 @@ CONFIG_MAGIC_SYSRQ=y
 CONFIG_DEBUG_KERNEL=y
 # CONFIG_DEBUG_SHIRQ is not set
 CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
 CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
@@ -931,19 +984,31 @@ CONFIG_DEBUG_BUGVERBOSE=y
 CONFIG_DEBUG_INFO=y
 # CONFIG_DEBUG_VM is not set
 # CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+# CONFIG_FTRACE is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
 # CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
 # CONFIG_DEBUG_PAGEALLOC is not set
-# CONFIG_DEBUGGER is not set
-# CONFIG_KGDB_CONSOLE is not set
+# CONFIG_CODE_PATCHING_SELFTEST is not set
+# CONFIG_FTR_FIXUP_SELFTEST is not set
+# CONFIG_XMON is not set
 # CONFIG_IRQSTACKS is not set
 CONFIG_BDI_SWITCH=y
+# CONFIG_BOOTX_TEXT is not set
 # CONFIG_PPC_EARLY_DEBUG is not set
 
 #
@@ -951,6 +1016,7 @@ CONFIG_BDI_SWITCH=y
 #
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
 CONFIG_CRYPTO=y
 
 #
@@ -991,6 +1057,10 @@ CONFIG_CRYPTO_PCBC=y
 # CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=y
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
 # CONFIG_CRYPTO_SHA1 is not set
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
@@ -1021,6 +1091,6 @@ CONFIG_CRYPTO_DES=y
 # CONFIG_CRYPTO_DEFLATE is not set
 # CONFIG_CRYPTO_LZO is not set
 # CONFIG_CRYPTO_HW is not set
-# CONFIG_PPC_CLOCK is not set
+CONFIG_PPC_CLOCK=y
 CONFIG_PPC_LIB_RHEAP=y
 # CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/mpc83xx_defconfig b/arch/powerpc/configs/mpc83xx_defconfig
index 4293c8be06e1..916e3df7cc45 100644
--- a/arch/powerpc/configs/mpc83xx_defconfig
+++ b/arch/powerpc/configs/mpc83xx_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc5
-# Mon Jun  9 08:52:14 2008
+# Linux kernel version: 2.6.27-rc4
+# Thu Aug 21 07:16:25 2008
 #
 # CONFIG_PPC64 is not set
 
@@ -16,6 +16,7 @@ CONFIG_6xx=y
 # CONFIG_E200 is not set
 CONFIG_PPC_FPU=y
 # CONFIG_FSL_EMB_PERFMON is not set
+# CONFIG_ALTIVEC is not set
 CONFIG_PPC_STD_MMU=y
 CONFIG_PPC_STD_MMU_32=y
 # CONFIG_PPC_MM_SLICES is not set
@@ -32,12 +33,14 @@ CONFIG_GENERIC_HARDIRQS=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_GENERIC_GPIO=y
 # CONFIG_ARCH_NO_VIRT_TO_BUS is not set
 CONFIG_PPC=y
 CONFIG_EARLY_PRINTK=y
@@ -51,6 +54,10 @@ CONFIG_PPC_UDBG_16550=y
 CONFIG_AUDIT_ARCH=y
 CONFIG_GENERIC_BUG=y
 CONFIG_DEFAULT_UIMAGE=y
+CONFIG_REDBOOT=y
+CONFIG_HIBERNATE_32=y
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
@@ -88,13 +95,13 @@ CONFIG_INITRAMFS_SOURCE=""
 CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
+CONFIG_PCSPKR_PLATFORM=y
 CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
@@ -112,10 +119,16 @@ CONFIG_SLAB=y
 # CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
+CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
 # CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+# CONFIG_HAVE_CLK is not set
 CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
@@ -126,12 +139,13 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-# CONFIG_KMOD is not set
+CONFIG_KMOD=y
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -150,40 +164,52 @@ CONFIG_CLASSIC_RCU=y
 #
 # Platform support
 #
-# CONFIG_PPC_MULTIPLATFORM is not set
-# CONFIG_PPC_82xx is not set
-CONFIG_PPC_83xx=y
-# CONFIG_PPC_86xx is not set
-# CONFIG_PPC_MPC512x is not set
-# CONFIG_PPC_MPC5121 is not set
+CONFIG_PPC_MULTIPLATFORM=y
+CONFIG_CLASSIC32=y
+CONFIG_PPC_CHRP=y
+# CONFIG_MPC5121_ADS is not set
+# CONFIG_MPC5121_GENERIC is not set
+# CONFIG_PPC_MPC52xx is not set
+CONFIG_PPC_PMAC=y
 # CONFIG_PPC_CELL is not set
 # CONFIG_PPC_CELL_NATIVE is not set
+# CONFIG_PPC_82xx is not set
 # CONFIG_PQ2ADS is not set
-CONFIG_MPC83xx=y
+CONFIG_PPC_83xx=y
 CONFIG_MPC831x_RDB=y
 CONFIG_MPC832x_MDS=y
 CONFIG_MPC832x_RDB=y
 CONFIG_MPC834x_MDS=y
 CONFIG_MPC834x_ITX=y
 CONFIG_MPC836x_MDS=y
+CONFIG_MPC836x_RDK=y
 CONFIG_MPC837x_MDS=y
 CONFIG_MPC837x_RDB=y
 CONFIG_SBC834x=y
+CONFIG_ASP834x=y
 CONFIG_PPC_MPC831x=y
 CONFIG_PPC_MPC832x=y
 CONFIG_PPC_MPC834x=y
 CONFIG_PPC_MPC837x=y
+# CONFIG_PPC_86xx is not set
+# CONFIG_EMBEDDED6xx is not set
+CONFIG_PPC_NATIVE=y
+# CONFIG_UDBG_RTAS_CONSOLE is not set
 CONFIG_IPIC=y
-# CONFIG_MPIC is not set
+CONFIG_MPIC=y
 # CONFIG_MPIC_WEIRD is not set
-# CONFIG_PPC_I8259 is not set
-# CONFIG_PPC_RTAS is not set
+CONFIG_PPC_I8259=y
+CONFIG_PPC_RTAS=y
+# CONFIG_RTAS_ERROR_LOGGING is not set
+CONFIG_RTAS_PROC=y
 # CONFIG_MMIO_NVRAM is not set
-# CONFIG_PPC_MPC106 is not set
+CONFIG_PPC_MPC106=y
 # CONFIG_PPC_970_NAP is not set
 # CONFIG_PPC_INDIRECT_IO is not set
 # CONFIG_GENERIC_IOMAP is not set
 # CONFIG_CPU_FREQ is not set
+# CONFIG_PPC601_SYNC_FIX is not set
+# CONFIG_TAU is not set
 CONFIG_QUICC_ENGINE=y
 # CONFIG_FSL_ULI1575 is not set
 
@@ -211,6 +237,7 @@ CONFIG_MATH_EMULATION=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_HAS_WALK_MEMORY=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+# CONFIG_KEXEC is not set
 CONFIG_ARCH_FLATMEM_ENABLE=y
 CONFIG_ARCH_POPULATES_NODE_MAP=y
 CONFIG_SELECT_MEMORY_MODEL=y
@@ -223,6 +250,7 @@ CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_MIGRATION=y
 # CONFIG_RESOURCES_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
@@ -230,6 +258,7 @@ CONFIG_VIRT_TO_BUS=y
 CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
+CONFIG_EXTRA_TARGETS=""
 # CONFIG_PM is not set
 CONFIG_SECCOMP=y
 CONFIG_ISA_DMA_API=y
@@ -237,15 +266,24 @@ CONFIG_ISA_DMA_API=y
 #
 # Bus options
 #
+# CONFIG_ISA is not set
 CONFIG_ZONE_DMA=y
 CONFIG_GENERIC_ISA_DMA=y
 CONFIG_PPC_INDIRECT_PCI=y
 CONFIG_FSL_SOC=y
-# CONFIG_PCI is not set
-# CONFIG_PCI_DOMAINS is not set
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
+CONFIG_FSL_PCI=y
+CONFIG_FSL_LBC=y
+CONFIG_FSL_GTM=y
+CONFIG_PPC_PCI_CHOICE=y
+CONFIG_PCI=y
+CONFIG_PCI_DOMAINS=y
+CONFIG_PCI_SYSCALL=y
+# CONFIG_PCIEPORTBUS is not set
+CONFIG_ARCH_SUPPORTS_MSI=y
+# CONFIG_PCI_MSI is not set
+CONFIG_PCI_LEGACY=y
 # CONFIG_PCCARD is not set
+# CONFIG_HOTPLUG_PCI is not set
 # CONFIG_HAS_RAPIDIO is not set
 
 #
@@ -261,10 +299,6 @@ CONFIG_PAGE_OFFSET=0xc0000000
 CONFIG_KERNEL_START=0xc0000000
 CONFIG_PHYSICAL_START=0x00000000
 CONFIG_TASK_SIZE=0xc0000000
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -412,11 +446,13 @@ CONFIG_MTD_CFI_UTIL=y
 # CONFIG_MTD_COMPLEX_MAPPINGS is not set
 # CONFIG_MTD_PHYSMAP is not set
 CONFIG_MTD_PHYSMAP_OF=y
+# CONFIG_MTD_INTEL_VR_NOR is not set
 # CONFIG_MTD_PLATRAM is not set
 
 #
 # Self-contained MTD device drivers
 #
+# CONFIG_MTD_PMC551 is not set
 # CONFIG_MTD_SLRAM is not set
 # CONFIG_MTD_PHRAM is not set
 # CONFIG_MTD_MTDRAM is not set
@@ -434,10 +470,12 @@ CONFIG_MTD_NAND_VERIFY_WRITE=y
 # CONFIG_MTD_NAND_MUSEUM_IDS is not set
 CONFIG_MTD_NAND_IDS=y
 # CONFIG_MTD_NAND_DISKONCHIP is not set
+# CONFIG_MTD_NAND_CAFE is not set
 # CONFIG_MTD_NAND_NANDSIM is not set
 # CONFIG_MTD_NAND_PLATFORM is not set
 # CONFIG_MTD_ALAUDA is not set
 CONFIG_MTD_NAND_FSL_ELBC=y
+# CONFIG_MTD_NAND_FSL_UPM is not set
 # CONFIG_MTD_ONENAND is not set
 
 #
@@ -445,14 +483,21 @@ CONFIG_MTD_NAND_FSL_ELBC=y
 #
 # CONFIG_MTD_UBI is not set
 CONFIG_OF_DEVICE=y
+CONFIG_OF_GPIO=y
 CONFIG_OF_I2C=y
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_FD is not set
+# CONFIG_MAC_FLOPPY is not set
+# CONFIG_BLK_CPQ_DA is not set
+# CONFIG_BLK_CPQ_CISS_DA is not set
+# CONFIG_BLK_DEV_DAC960 is not set
+# CONFIG_BLK_DEV_UMEM is not set
 # CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
 # CONFIG_BLK_DEV_CRYPTOLOOP is not set
 # CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_SX8 is not set
 # CONFIG_BLK_DEV_UB is not set
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=16
@@ -460,9 +505,14 @@ CONFIG_BLK_DEV_RAM_SIZE=32768
 # CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
+# CONFIG_PHANTOM is not set
 # CONFIG_EEPROM_93CX6 is not set
+# CONFIG_SGI_IOC4 is not set
+# CONFIG_TIFM_CORE is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_HP_ILO is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -505,24 +555,128 @@ CONFIG_SCSI_WAIT_SCAN=m
 # CONFIG_SCSI_SRP_ATTRS is not set
 CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_ISCSI_TCP is not set
+# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
+# CONFIG_SCSI_3W_9XXX is not set
+# CONFIG_SCSI_ACARD is not set
+# CONFIG_SCSI_AACRAID is not set
+# CONFIG_SCSI_AIC7XXX is not set
+# CONFIG_SCSI_AIC7XXX_OLD is not set
+# CONFIG_SCSI_AIC79XX is not set
+# CONFIG_SCSI_AIC94XX is not set
+# CONFIG_SCSI_DPT_I2O is not set
+# CONFIG_SCSI_ADVANSYS is not set
+# CONFIG_SCSI_ARCMSR is not set
+# CONFIG_MEGARAID_NEWGEN is not set
+# CONFIG_MEGARAID_LEGACY is not set
+# CONFIG_MEGARAID_SAS is not set
+# CONFIG_SCSI_HPTIOP is not set
+# CONFIG_SCSI_BUSLOGIC is not set
+# CONFIG_SCSI_DMX3191D is not set
+# CONFIG_SCSI_EATA is not set
+# CONFIG_SCSI_FUTURE_DOMAIN is not set
+# CONFIG_SCSI_GDTH is not set
+# CONFIG_SCSI_IPS is not set
+# CONFIG_SCSI_INITIO is not set
+# CONFIG_SCSI_INIA100 is not set
+# CONFIG_SCSI_MVSAS is not set
+# CONFIG_SCSI_STEX is not set
+# CONFIG_SCSI_SYM53C8XX_2 is not set
+# CONFIG_SCSI_IPR is not set
+# CONFIG_SCSI_QLOGIC_1280 is not set
+# CONFIG_SCSI_QLA_FC is not set
+# CONFIG_SCSI_QLA_ISCSI is not set
+# CONFIG_SCSI_LPFC is not set
+# CONFIG_SCSI_DC395x is not set
+# CONFIG_SCSI_DC390T is not set
+# CONFIG_SCSI_NSP32 is not set
 # CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_MESH is not set
+# CONFIG_SCSI_MAC53C94 is not set
+# CONFIG_SCSI_SRP is not set
+# CONFIG_SCSI_DH is not set
 CONFIG_ATA=y
 # CONFIG_ATA_NONSTANDARD is not set
 CONFIG_SATA_PMP=y
+# CONFIG_SATA_AHCI is not set
+# CONFIG_SATA_SIL24 is not set
 CONFIG_SATA_FSL=y
 CONFIG_ATA_SFF=y
+# CONFIG_SATA_SVW is not set
+# CONFIG_ATA_PIIX is not set
 # CONFIG_SATA_MV is not set
+# CONFIG_SATA_NV is not set
+# CONFIG_PDC_ADMA is not set
+# CONFIG_SATA_QSTOR is not set
+# CONFIG_SATA_PROMISE is not set
+# CONFIG_SATA_SX4 is not set
+# CONFIG_SATA_SIL is not set
+# CONFIG_SATA_SIS is not set
+# CONFIG_SATA_ULI is not set
+# CONFIG_SATA_VIA is not set
+# CONFIG_SATA_VITESSE is not set
+# CONFIG_SATA_INIC162X is not set
+# CONFIG_PATA_ALI is not set
+# CONFIG_PATA_AMD is not set
+# CONFIG_PATA_ARTOP is not set
+# CONFIG_PATA_ATIIXP is not set
+# CONFIG_PATA_CMD640_PCI is not set
+# CONFIG_PATA_CMD64X is not set
+# CONFIG_PATA_CS5520 is not set
+# CONFIG_PATA_CS5530 is not set
+# CONFIG_PATA_CYPRESS is not set
+# CONFIG_PATA_EFAR is not set
+# CONFIG_ATA_GENERIC is not set
+# CONFIG_PATA_HPT366 is not set
+# CONFIG_PATA_HPT37X is not set
+# CONFIG_PATA_HPT3X2N is not set
+# CONFIG_PATA_HPT3X3 is not set
+# CONFIG_PATA_IT821X is not set
+# CONFIG_PATA_IT8213 is not set
+# CONFIG_PATA_JMICRON is not set
+# CONFIG_PATA_TRIFLEX is not set
+# CONFIG_PATA_MARVELL is not set
+# CONFIG_PATA_MPIIX is not set
+# CONFIG_PATA_OLDPIIX is not set
+# CONFIG_PATA_NETCELL is not set
+# CONFIG_PATA_NINJA32 is not set
+# CONFIG_PATA_NS87410 is not set
+# CONFIG_PATA_NS87415 is not set
+# CONFIG_PATA_OPTI is not set
+# CONFIG_PATA_OPTIDMA is not set
+# CONFIG_PATA_PDC_OLD is not set
+# CONFIG_PATA_RADISYS is not set
+# CONFIG_PATA_RZ1000 is not set
+# CONFIG_PATA_SC1200 is not set
+# CONFIG_PATA_SERVERWORKS is not set
+# CONFIG_PATA_PDC2027X is not set
+# CONFIG_PATA_SIL680 is not set
+# CONFIG_PATA_SIS is not set
+# CONFIG_PATA_VIA is not set
+# CONFIG_PATA_WINBOND is not set
 # CONFIG_PATA_PLATFORM is not set
+# CONFIG_PATA_SCH is not set
 # CONFIG_MD is not set
+# CONFIG_FUSION is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+
+#
+# Enable only one of the two stacks, unless you know what you are doing
+#
+# CONFIG_FIREWIRE is not set
+# CONFIG_IEEE1394 is not set
+# CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
 # CONFIG_EQUALIZER is not set
 # CONFIG_TUN is not set
 # CONFIG_VETH is not set
+# CONFIG_ARCNET is not set
 CONFIG_PHYLIB=y
 
 #
@@ -542,21 +696,60 @@ CONFIG_ICPLUS_PHY=y
 # CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
+# CONFIG_MACE is not set
+# CONFIG_BMAC is not set
+# CONFIG_HAPPYMEAL is not set
+# CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
+# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_NET_TULIP is not set
+# CONFIG_HP100 is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
 # CONFIG_IBM_NEW_EMAC_RGMII is not set
 # CONFIG_IBM_NEW_EMAC_TAH is not set
 # CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_NET_PCI is not set
 # CONFIG_B44 is not set
 CONFIG_NETDEV_1000=y
-# CONFIG_E1000E_ENABLED is not set
+# CONFIG_ACENIC is not set
+# CONFIG_DL2K is not set
+# CONFIG_E1000 is not set
+# CONFIG_E1000E is not set
+# CONFIG_IP1000 is not set
+# CONFIG_IGB is not set
+# CONFIG_NS83820 is not set
+# CONFIG_HAMACHI is not set
+# CONFIG_YELLOWFIN is not set
+# CONFIG_R8169 is not set
+# CONFIG_SIS190 is not set
+# CONFIG_SKGE is not set
+# CONFIG_SKY2 is not set
+# CONFIG_VIA_VELOCITY is not set
+# CONFIG_TIGON3 is not set
+# CONFIG_BNX2 is not set
 CONFIG_GIANFAR=y
-# CONFIG_GFAR_NAPI is not set
 CONFIG_UCC_GETH=y
-# CONFIG_UGETH_NAPI is not set
 # CONFIG_UGETH_MAGIC_PACKET is not set
 # CONFIG_UGETH_FILTERING is not set
 # CONFIG_UGETH_TX_ON_DEMAND is not set
+# CONFIG_MV643XX_ETH is not set
+# CONFIG_QLA3XXX is not set
+# CONFIG_ATL1 is not set
+# CONFIG_ATL1E is not set
 CONFIG_NETDEV_10000=y
+# CONFIG_CHELSIO_T1 is not set
+# CONFIG_CHELSIO_T3 is not set
+# CONFIG_IXGBE is not set
+# CONFIG_IXGB is not set
+# CONFIG_S2IO is not set
+# CONFIG_MYRI10GE is not set
+# CONFIG_NETXEN_NIC is not set
+# CONFIG_NIU is not set
+# CONFIG_MLX4_CORE is not set
+# CONFIG_TEHUTI is not set
+# CONFIG_BNX2X is not set
+# CONFIG_SFC is not set
+# CONFIG_TR is not set
 
 #
 # Wireless LAN
@@ -574,8 +767,11 @@ CONFIG_NETDEV_10000=y
 # CONFIG_USB_RTL8150 is not set
 # CONFIG_USB_USBNET is not set
 # CONFIG_WAN is not set
+# CONFIG_FDDI is not set
+# CONFIG_HIPPI is not set
 # CONFIG_PPP is not set
 # CONFIG_SLIP is not set
+# CONFIG_NET_FC is not set
 # CONFIG_NETCONSOLE is not set
 # CONFIG_NETPOLL is not set
 # CONFIG_NET_POLL_CONTROLLER is not set
@@ -619,12 +815,14 @@ CONFIG_INPUT=y
 # CONFIG_VT is not set
 CONFIG_DEVKMEM=y
 # CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_NOZOMI is not set
 
 #
 # Serial drivers
 #
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_PCI=y
 CONFIG_SERIAL_8250_NR_UARTS=4
 CONFIG_SERIAL_8250_RUNTIME_UARTS=4
 # CONFIG_SERIAL_8250_EXTENDED is not set
@@ -635,43 +833,95 @@ CONFIG_SERIAL_8250_RUNTIME_UARTS=4
 # CONFIG_SERIAL_UARTLITE is not set
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_PMACZILOG is not set
+# CONFIG_SERIAL_JSM is not set
 # CONFIG_SERIAL_OF_PLATFORM is not set
 # CONFIG_SERIAL_QE is not set
 CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_BRIQ_PANEL is not set
+# CONFIG_HVC_RTAS is not set
 # CONFIG_IPMI_HANDLER is not set
-# CONFIG_HW_RANDOM is not set
+CONFIG_HW_RANDOM=y
 # CONFIG_NVRAM is not set
 CONFIG_GEN_RTC=y
 # CONFIG_GEN_RTC_X is not set
 # CONFIG_R3964 is not set
+# CONFIG_APPLICOM is not set
 # CONFIG_RAW_DRIVER is not set
 # CONFIG_TCG_TPM is not set
+CONFIG_DEVPORT=y
 CONFIG_I2C=y
 CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
 
 #
 # I2C Hardware Bus support
 #
+
+#
+# PC SMBus host controller drivers
+#
+# CONFIG_I2C_ALI1535 is not set
+# CONFIG_I2C_ALI1563 is not set
+# CONFIG_I2C_ALI15X3 is not set
+# CONFIG_I2C_AMD756 is not set
+# CONFIG_I2C_AMD8111 is not set
+# CONFIG_I2C_I801 is not set
+# CONFIG_I2C_ISCH is not set
+# CONFIG_I2C_PIIX4 is not set
+# CONFIG_I2C_NFORCE2 is not set
+# CONFIG_I2C_SIS5595 is not set
+# CONFIG_I2C_SIS630 is not set
+# CONFIG_I2C_SIS96X is not set
+# CONFIG_I2C_VIA is not set
+# CONFIG_I2C_VIAPRO is not set
+
+#
+# Mac SMBus host controller drivers
+#
+# CONFIG_I2C_HYDRA is not set
+CONFIG_I2C_POWERMAC=y
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+# CONFIG_I2C_GPIO is not set
 CONFIG_I2C_MPC=y
 # CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
 # CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
 # CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_STUB is not set
 # CONFIG_I2C_TINY_USB is not set
+
+#
+# Graphics adapter I2C/DDC channel drivers
+#
+# CONFIG_I2C_VOODOO3 is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
 # CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
 
 #
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
+# CONFIG_AT24 is not set
 # CONFIG_SENSORS_EEPROM is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_TPS65010 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
@@ -679,10 +929,31 @@ CONFIG_I2C_MPC=y
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
 # CONFIG_SPI is not set
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_GPIO_SYSFS is not set
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
+
+#
+# PCI GPIO expanders:
+#
+# CONFIG_GPIO_BT8XX is not set
+
+#
+# SPI GPIO expanders:
+#
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 CONFIG_HWMON=y
 # CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_AD7414 is not set
 # CONFIG_SENSORS_AD7418 is not set
 # CONFIG_SENSORS_ADM1021 is not set
 # CONFIG_SENSORS_ADM1025 is not set
@@ -692,8 +963,10 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_ADM9240 is not set
 # CONFIG_SENSORS_ADT7470 is not set
 # CONFIG_SENSORS_ADT7473 is not set
+# CONFIG_SENSORS_AMS is not set
 # CONFIG_SENSORS_ATXP1 is not set
 # CONFIG_SENSORS_DS1621 is not set
+# CONFIG_SENSORS_I5K_AMB is not set
 # CONFIG_SENSORS_F71805F is not set
 # CONFIG_SENSORS_F71882FG is not set
 # CONFIG_SENSORS_F75375S is not set
@@ -715,13 +988,16 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_MAX6650 is not set
 # CONFIG_SENSORS_PC87360 is not set
 # CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_SIS5595 is not set
 # CONFIG_SENSORS_DME1737 is not set
 # CONFIG_SENSORS_SMSC47M1 is not set
 # CONFIG_SENSORS_SMSC47M192 is not set
 # CONFIG_SENSORS_SMSC47B397 is not set
 # CONFIG_SENSORS_ADS7828 is not set
 # CONFIG_SENSORS_THMC50 is not set
+# CONFIG_SENSORS_VIA686A is not set
 # CONFIG_SENSORS_VT1211 is not set
+# CONFIG_SENSORS_VT8231 is not set
 # CONFIG_SENSORS_W83781D is not set
 # CONFIG_SENSORS_W83791D is not set
 # CONFIG_SENSORS_W83792D is not set
@@ -732,6 +1008,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_W83627EHF is not set
 # CONFIG_HWMON_DEBUG_CHIP is not set
 # CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
 CONFIG_WATCHDOG=y
 # CONFIG_WATCHDOG_NOWAYOUT is not set
 
@@ -739,7 +1016,15 @@ CONFIG_WATCHDOG=y
 # Watchdog Device Drivers
 #
 # CONFIG_SOFT_WATCHDOG is not set
-CONFIG_83xx_WDT=y
+# CONFIG_ALIM7101_WDT is not set
+# CONFIG_8xxx_WDT is not set
+# CONFIG_WATCHDOG_RTAS is not set
+
+#
+# PCI-based Watchdog Cards
+#
+# CONFIG_PCIPCWATCHDOG is not set
+# CONFIG_WDTPCI is not set
 
 #
 # USB-based Watchdog Cards
@@ -755,8 +1040,10 @@ CONFIG_SSB_POSSIBLE=y
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
 
 #
 # Multimedia devices
@@ -778,6 +1065,8 @@ CONFIG_DAB=y
 #
 # Graphics support
 #
+# CONFIG_AGP is not set
+# CONFIG_DRM is not set
 # CONFIG_VGASTATE is not set
 CONFIG_VIDEO_OUTPUT_CONTROL=m
 # CONFIG_FB is not set
@@ -787,10 +1076,6 @@ CONFIG_VIDEO_OUTPUT_CONTROL=m
 # Display device support
 #
 # CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Sound
-#
 # CONFIG_SOUND is not set
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
@@ -806,7 +1091,7 @@ CONFIG_USB_HID=y
 # CONFIG_USB_HIDDEV is not set
 CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
-# CONFIG_USB_ARCH_HAS_OHCI is not set
+CONFIG_USB_ARCH_HAS_OHCI=y
 CONFIG_USB_ARCH_HAS_EHCI=y
 CONFIG_USB=y
 # CONFIG_USB_DEBUG is not set
@@ -821,6 +1106,7 @@ CONFIG_USB_DEVICE_CLASS=y
 # CONFIG_USB_OTG is not set
 # CONFIG_USB_OTG_WHITELIST is not set
 # CONFIG_USB_OTG_BLACKLIST_HUB is not set
+CONFIG_USB_MON=y
 
 #
 # USB Host Controller Drivers
@@ -833,6 +1119,8 @@ CONFIG_USB_EHCI_FSL=y
 CONFIG_USB_EHCI_HCD_PPC_OF=y
 # CONFIG_USB_ISP116X_HCD is not set
 # CONFIG_USB_ISP1760_HCD is not set
+# CONFIG_USB_OHCI_HCD is not set
+# CONFIG_USB_UHCI_HCD is not set
 # CONFIG_USB_SL811_HCD is not set
 # CONFIG_USB_R8A66597_HCD is not set
 
@@ -858,7 +1146,6 @@ CONFIG_USB_EHCI_HCD_PPC_OF=y
 #
 # CONFIG_USB_MDC800 is not set
 # CONFIG_USB_MICROTEK is not set
-CONFIG_USB_MON=y
 
 #
 # USB port drivers
@@ -871,7 +1158,6 @@ CONFIG_USB_MON=y
 # CONFIG_USB_EMI62 is not set
 # CONFIG_USB_EMI26 is not set
 # CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_AUERSWALD is not set
 # CONFIG_USB_RIO500 is not set
 # CONFIG_USB_LEGOTOWER is not set
 # CONFIG_USB_LCD is not set
@@ -893,6 +1179,7 @@ CONFIG_USB_MON=y
 # CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
 # CONFIG_ACCESSIBILITY is not set
+# CONFIG_INFINIBAND is not set
 # CONFIG_EDAC is not set
 # CONFIG_RTC_CLASS is not set
 # CONFIG_DMADEVICES is not set
@@ -963,6 +1250,7 @@ CONFIG_TMPFS=y
 # CONFIG_CRAMFS is not set
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
 # CONFIG_ROMFS_FS is not set
@@ -973,14 +1261,13 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
-# CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_BIND34 is not set
 CONFIG_RPCSEC_GSS_KRB5=y
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -1014,6 +1301,7 @@ CONFIG_MSDOS_PARTITION=y
 # CONFIG_DLM is not set
 CONFIG_UCC_FAST=y
 CONFIG_UCC=y
+CONFIG_QE_GPIO=y
 
 #
 # Library routines
@@ -1022,6 +1310,7 @@ CONFIG_BITREVERSE=y
 # CONFIG_GENERIC_FIND_FIRST_BIT is not set
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
+CONFIG_CRC_T10DIF=y
 # CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
@@ -1045,8 +1334,18 @@ CONFIG_FRAME_WARN=1024
 # CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+# CONFIG_FTRACE is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
 # CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_IRQSTACKS is not set
+# CONFIG_BOOTX_TEXT is not set
 # CONFIG_PPC_EARLY_DEBUG is not set
 
 #
@@ -1061,12 +1360,14 @@ CONFIG_CRYPTO=y
 # Crypto core or helper
 #
 CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_AEAD=y
 CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_HASH=y
 CONFIG_CRYPTO_MANAGER=y
 # CONFIG_CRYPTO_GF128MUL is not set
 # CONFIG_CRYPTO_NULL is not set
 # CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
+CONFIG_CRYPTO_AUTHENC=y
 # CONFIG_CRYPTO_TEST is not set
 
 #
@@ -1100,6 +1401,10 @@ CONFIG_CRYPTO_PCBC=m
 # CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=y
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
 # CONFIG_CRYPTO_SHA1 is not set
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
@@ -1131,6 +1436,8 @@ CONFIG_CRYPTO_DES=y
 # CONFIG_CRYPTO_DEFLATE is not set
 # CONFIG_CRYPTO_LZO is not set
 CONFIG_CRYPTO_HW=y
+# CONFIG_CRYPTO_DEV_HIFN_795X is not set
+CONFIG_CRYPTO_DEV_TALITOS=y
 # CONFIG_PPC_CLOCK is not set
 CONFIG_PPC_LIB_RHEAP=y
 # CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/mpc85xx_defconfig b/arch/powerpc/configs/mpc85xx_defconfig
index fa0170504b88..f0a13bebf50c 100644
--- a/arch/powerpc/configs/mpc85xx_defconfig
+++ b/arch/powerpc/configs/mpc85xx_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc5
-# Mon Jun  9 09:03:46 2008
+# Linux kernel version: 2.6.27-rc4
+# Thu Aug 21 07:15:20 2008
 #
 # CONFIG_PPC64 is not set
 
@@ -15,6 +15,7 @@ CONFIG_PPC_85xx=y
 # CONFIG_44x is not set
 # CONFIG_E200 is not set
 CONFIG_E500=y
+# CONFIG_PPC_E500MC is not set
 CONFIG_BOOKE=y
 CONFIG_FSL_BOOKE=y
 CONFIG_FSL_EMB_PERFMON=y
@@ -33,12 +34,14 @@ CONFIG_GENERIC_HARDIRQS=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_GENERIC_GPIO=y
 # CONFIG_ARCH_NO_VIRT_TO_BUS is not set
 CONFIG_PPC=y
 CONFIG_EARLY_PRINTK=y
@@ -92,7 +95,6 @@ CONFIG_INITRAMFS_SOURCE=""
 CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
 CONFIG_KALLSYMS_EXTRA_PASS=y
@@ -118,10 +120,16 @@ CONFIG_SLUB=y
 # CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
+CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
 # CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+CONFIG_HAVE_CLK=y
 CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
@@ -138,6 +146,7 @@ CONFIG_LBD=y
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -156,8 +165,6 @@ CONFIG_CLASSIC_RCU=y
 #
 # Platform support
 #
-# CONFIG_PPC_MPC512x is not set
-# CONFIG_PPC_MPC5121 is not set
 # CONFIG_PPC_CELL is not set
 # CONFIG_PPC_CELL_NATIVE is not set
 # CONFIG_PQ2ADS is not set
@@ -166,11 +173,13 @@ CONFIG_MPC8540_ADS=y
 CONFIG_MPC8560_ADS=y
 CONFIG_MPC85xx_CDS=y
 CONFIG_MPC85xx_MDS=y
+CONFIG_MPC8536_DS=y
 CONFIG_MPC85xx_DS=y
 CONFIG_KSI8560=y
 # CONFIG_STX_GP3 is not set
 CONFIG_TQM8540=y
 CONFIG_TQM8541=y
+CONFIG_TQM8548=y
 CONFIG_TQM8555=y
 CONFIG_TQM8560=y
 CONFIG_SBC8548=y
@@ -189,7 +198,6 @@ CONFIG_PPC_I8259=y
 # CONFIG_CPU_FREQ is not set
 CONFIG_QUICC_ENGINE=y
 CONFIG_CPM2=y
-CONFIG_PPC_CPM_NEW_BINDING=y
 CONFIG_FSL_ULI1575=y
 CONFIG_CPM=y
 
@@ -206,7 +214,7 @@ CONFIG_HZ_250=y
 # CONFIG_HZ_300 is not set
 # CONFIG_HZ_1000 is not set
 CONFIG_HZ=250
-# CONFIG_SCHED_HRTICK is not set
+CONFIG_SCHED_HRTICK=y
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
@@ -229,6 +237,7 @@ CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_MIGRATION=y
 # CONFIG_RESOURCES_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
@@ -236,6 +245,7 @@ CONFIG_VIRT_TO_BUS=y
 CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
+CONFIG_EXTRA_TARGETS=""
 # CONFIG_PM is not set
 CONFIG_SECCOMP=y
 CONFIG_ISA_DMA_API=y
@@ -248,6 +258,7 @@ CONFIG_GENERIC_ISA_DMA=y
 CONFIG_PPC_INDIRECT_PCI=y
 CONFIG_FSL_SOC=y
 CONFIG_FSL_PCI=y
+CONFIG_PPC_PCI_CHOICE=y
 CONFIG_PCI=y
 CONFIG_PCI_DOMAINS=y
 CONFIG_PCI_SYSCALL=y
@@ -274,10 +285,6 @@ CONFIG_KERNEL_START=0xc0000000
 CONFIG_PHYSICAL_START=0x00000000
 CONFIG_PHYSICAL_ALIGN=0x10000000
 CONFIG_TASK_SIZE=0xc0000000
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -403,12 +410,15 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_DEBUG_DRIVER is not set
 # CONFIG_DEBUG_DEVRES is not set
 # CONFIG_SYS_HYPERVISOR is not set
 # CONFIG_CONNECTOR is not set
 # CONFIG_MTD is not set
 CONFIG_OF_DEVICE=y
+CONFIG_OF_GPIO=y
 CONFIG_OF_I2C=y
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
@@ -429,12 +439,14 @@ CONFIG_BLK_DEV_RAM_SIZE=131072
 # CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_PHANTOM is not set
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_HP_ILO is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -514,6 +526,7 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_NSP32 is not set
 # CONFIG_SCSI_DEBUG is not set
 # CONFIG_SCSI_SRP is not set
+# CONFIG_SCSI_DH is not set
 CONFIG_ATA=y
 # CONFIG_ATA_NONSTANDARD is not set
 CONFIG_SATA_PMP=y
@@ -581,12 +594,15 @@ CONFIG_PATA_ALI=y
 #
 # IEEE 1394 (FireWire) support
 #
+
+#
+# Enable only one of the two stacks, unless you know what you are doing
+#
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 CONFIG_DUMMY=y
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -631,7 +647,6 @@ CONFIG_NETDEV_1000=y
 # CONFIG_DL2K is not set
 # CONFIG_E1000 is not set
 # CONFIG_E1000E is not set
-# CONFIG_E1000E_ENABLED is not set
 # CONFIG_IP1000 is not set
 # CONFIG_IGB is not set
 # CONFIG_NS83820 is not set
@@ -645,10 +660,10 @@ CONFIG_NETDEV_1000=y
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
 CONFIG_GIANFAR=y
-CONFIG_GFAR_NAPI=y
 # CONFIG_UCC_GETH is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
+# CONFIG_ATL1E is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
 # CONFIG_CHELSIO_T3 is not set
@@ -725,12 +740,14 @@ CONFIG_SERIO_SERPORT=y
 # CONFIG_SERIO_PCIPS2 is not set
 CONFIG_SERIO_LIBPS2=y
 # CONFIG_SERIO_RAW is not set
+# CONFIG_SERIO_XILINX_XPS_PS2 is not set
 # CONFIG_GAMEPORT is not set
 
 #
 # Character devices
 #
 CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
 # CONFIG_VT_HW_CONSOLE_BINDING is not set
@@ -776,44 +793,68 @@ CONFIG_DEVPORT=y
 CONFIG_I2C=y
 CONFIG_I2C_BOARDINFO=y
 # CONFIG_I2C_CHARDEV is not set
+CONFIG_I2C_HELPER_AUTO=y
 
 #
 # I2C Hardware Bus support
 #
+
+#
+# PC SMBus host controller drivers
+#
 # CONFIG_I2C_ALI1535 is not set
 # CONFIG_I2C_ALI1563 is not set
 # CONFIG_I2C_ALI15X3 is not set
 # CONFIG_I2C_AMD756 is not set
 # CONFIG_I2C_AMD8111 is not set
 # CONFIG_I2C_I801 is not set
-# CONFIG_I2C_I810 is not set
+# CONFIG_I2C_ISCH is not set
 # CONFIG_I2C_PIIX4 is not set
-CONFIG_I2C_MPC=y
 # CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_PROSAVAGE is not set
-# CONFIG_I2C_SAVAGE4 is not set
-# CONFIG_I2C_SIMTEC is not set
 # CONFIG_I2C_SIS5595 is not set
 # CONFIG_I2C_SIS630 is not set
 # CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_TINY_USB is not set
 # CONFIG_I2C_VIA is not set
 # CONFIG_I2C_VIAPRO is not set
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+# CONFIG_I2C_CPM is not set
+# CONFIG_I2C_GPIO is not set
+CONFIG_I2C_MPC=y
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Graphics adapter I2C/DDC channel drivers
+#
 # CONFIG_I2C_VOODOO3 is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
 # CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
 
 #
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
+# CONFIG_AT24 is not set
 CONFIG_SENSORS_EEPROM=y
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_TPS65010 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
@@ -821,10 +862,32 @@ CONFIG_SENSORS_EEPROM=y
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
 # CONFIG_SPI is not set
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+# CONFIG_GPIO_SYSFS is not set
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
+
+#
+# PCI GPIO expanders:
+#
+# CONFIG_GPIO_BT8XX is not set
+
+#
+# SPI GPIO expanders:
+#
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 # CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
 
 #
@@ -836,8 +899,10 @@ CONFIG_SSB_POSSIBLE=y
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
 
 #
 # Multimedia devices
@@ -879,6 +944,7 @@ CONFIG_DVB_CAPTURE_DRIVERS=y
 # CONFIG_DVB_TTUSB_BUDGET is not set
 # CONFIG_DVB_TTUSB_DEC is not set
 # CONFIG_DVB_CINERGYT2 is not set
+# CONFIG_DVB_SIANO_SMS1XXX is not set
 
 #
 # Supported FlexCopII (B2C2) Adapters
@@ -925,6 +991,7 @@ CONFIG_DVB_CAPTURE_DRIVERS=y
 # CONFIG_DVB_SP887X is not set
 # CONFIG_DVB_CX22700 is not set
 # CONFIG_DVB_CX22702 is not set
+# CONFIG_DVB_DRX397XD is not set
 # CONFIG_DVB_L64781 is not set
 # CONFIG_DVB_TDA1004X is not set
 # CONFIG_DVB_NXT6000 is not set
@@ -992,15 +1059,7 @@ CONFIG_VIDEO_OUTPUT_CONTROL=y
 CONFIG_VGA_CONSOLE=y
 # CONFIG_VGACON_SOFT_SCROLLBACK is not set
 CONFIG_DUMMY_CONSOLE=y
-
-#
-# Sound
-#
 CONFIG_SOUND=y
-
-#
-# Advanced Linux Sound Architecture
-#
 CONFIG_SND=y
 CONFIG_SND_TIMER=y
 CONFIG_SND_PCM=y
@@ -1014,19 +1073,15 @@ CONFIG_SND_PCM_OSS_PLUGINS=y
 CONFIG_SND_VERBOSE_PROCFS=y
 # CONFIG_SND_VERBOSE_PRINTK is not set
 # CONFIG_SND_DEBUG is not set
-
-#
-# Generic devices
-#
+CONFIG_SND_VMASTER=y
 CONFIG_SND_AC97_CODEC=y
+CONFIG_SND_DRIVERS=y
 # CONFIG_SND_DUMMY is not set
 # CONFIG_SND_MTPAV is not set
 # CONFIG_SND_SERIAL_U16550 is not set
 # CONFIG_SND_MPU401 is not set
-
-#
-# PCI devices
-#
+# CONFIG_SND_AC97_POWER_SAVE is not set
+CONFIG_SND_PCI=y
 # CONFIG_SND_AD1889 is not set
 # CONFIG_SND_ALS300 is not set
 # CONFIG_SND_ALS4000 is not set
@@ -1088,39 +1143,12 @@ CONFIG_SND_INTEL8X0=y
 # CONFIG_SND_VIRTUOSO is not set
 # CONFIG_SND_VX222 is not set
 # CONFIG_SND_YMFPCI is not set
-# CONFIG_SND_AC97_POWER_SAVE is not set
-
-#
-# ALSA PowerMac devices
-#
-
-#
-# ALSA PowerPC devices
-#
-
-#
-# USB devices
-#
+CONFIG_SND_PPC=y
+CONFIG_SND_USB=y
 # CONFIG_SND_USB_AUDIO is not set
 # CONFIG_SND_USB_USX2Y is not set
 # CONFIG_SND_USB_CAIAQ is not set
-
-#
-# System on Chip audio support
-#
 # CONFIG_SND_SOC is not set
-
-#
-# ALSA SoC audio for Freescale SOCs
-#
-
-#
-# SoC Audio for the Texas Instruments OMAP
-#
-
-#
-# Open Sound System
-#
 # CONFIG_SOUND_PRIME is not set
 CONFIG_AC97_BUS=y
 CONFIG_HID_SUPPORT=y
@@ -1152,6 +1180,7 @@ CONFIG_USB_DEVICE_CLASS=y
 # CONFIG_USB_OTG is not set
 # CONFIG_USB_OTG_WHITELIST is not set
 # CONFIG_USB_OTG_BLACKLIST_HUB is not set
+CONFIG_USB_MON=y
 
 #
 # USB Host Controller Drivers
@@ -1175,6 +1204,7 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y
 # CONFIG_USB_UHCI_HCD is not set
 # CONFIG_USB_SL811_HCD is not set
 # CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_MUSB_HDRC is not set
 
 #
 # USB Device Class drivers
@@ -1203,6 +1233,7 @@ CONFIG_USB_STORAGE=y
 # CONFIG_USB_STORAGE_ALAUDA is not set
 # CONFIG_USB_STORAGE_ONETOUCH is not set
 # CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_SIERRA is not set
 # CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
 # CONFIG_USB_LIBUSUAL is not set
 
@@ -1211,7 +1242,6 @@ CONFIG_USB_STORAGE=y
 #
 # CONFIG_USB_MDC800 is not set
 # CONFIG_USB_MICROTEK is not set
-CONFIG_USB_MON=y
 
 #
 # USB port drivers
@@ -1224,7 +1254,6 @@ CONFIG_USB_MON=y
 # CONFIG_USB_EMI62 is not set
 # CONFIG_USB_EMI26 is not set
 # CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_AUERSWALD is not set
 # CONFIG_USB_RIO500 is not set
 # CONFIG_USB_LEGOTOWER is not set
 # CONFIG_USB_LCD is not set
@@ -1285,6 +1314,7 @@ CONFIG_RTC_INTF_DEV=y
 # CONFIG_RTC_DRV_PCF8583 is not set
 # CONFIG_RTC_DRV_M41T80 is not set
 # CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
 
 #
 # SPI RTC drivers
@@ -1318,6 +1348,7 @@ CONFIG_DMA_ENGINE=y
 # DMA Clients
 #
 # CONFIG_NET_DMA is not set
+# CONFIG_DMATEST is not set
 # CONFIG_UIO is not set
 
 #
@@ -1332,6 +1363,7 @@ CONFIG_EXT3_FS_XATTR=y
 # CONFIG_EXT3_FS_SECURITY is not set
 # CONFIG_EXT4DEV_FS is not set
 CONFIG_JBD=y
+# CONFIG_JBD_DEBUG is not set
 CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
@@ -1394,6 +1426,7 @@ CONFIG_EFS_FS=m
 CONFIG_CRAMFS=y
 CONFIG_VXFS_FS=m
 # CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 CONFIG_HPFS_FS=m
 CONFIG_QNX4FS_FS=m
 # CONFIG_ROMFS_FS is not set
@@ -1406,17 +1439,16 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
+CONFIG_ROOT_NFS=y
 CONFIG_NFSD=y
 # CONFIG_NFSD_V3 is not set
 # CONFIG_NFSD_V4 is not set
-CONFIG_ROOT_NFS=y
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_EXPORTFS=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_BIND34 is not set
 CONFIG_RPCSEC_GSS_KRB5=y
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -1487,6 +1519,7 @@ CONFIG_NLS_DEFAULT="iso8859-1"
 # CONFIG_NLS_KOI8_U is not set
 CONFIG_NLS_UTF8=m
 # CONFIG_DLM is not set
+# CONFIG_QE_GPIO is not set
 
 #
 # Library routines
@@ -1495,6 +1528,7 @@ CONFIG_BITREVERSE=y
 # CONFIG_GENERIC_FIND_FIRST_BIT is not set
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
+CONFIG_CRC_T10DIF=y
 CONFIG_CRC_ITU_T=m
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
@@ -1515,11 +1549,13 @@ CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_FRAME_WARN=1024
 # CONFIG_MAGIC_SYSRQ is not set
 # CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
+CONFIG_DEBUG_FS=y
 # CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
 # CONFIG_DEBUG_SHIRQ is not set
 CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
 CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
@@ -1538,19 +1574,31 @@ CONFIG_SCHED_DEBUG=y
 CONFIG_DEBUG_INFO=y
 # CONFIG_DEBUG_VM is not set
 # CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+# CONFIG_FTRACE is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
 # CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
 # CONFIG_DEBUG_PAGEALLOC is not set
-# CONFIG_DEBUGGER is not set
-# CONFIG_KGDB_CONSOLE is not set
+# CONFIG_CODE_PATCHING_SELFTEST is not set
+# CONFIG_FTR_FIXUP_SELFTEST is not set
+# CONFIG_XMON is not set
 # CONFIG_IRQSTACKS is not set
+CONFIG_VIRQ_DEBUG=y
 # CONFIG_BDI_SWITCH is not set
 # CONFIG_PPC_EARLY_DEBUG is not set
 
@@ -1606,6 +1654,10 @@ CONFIG_CRYPTO_HMAC=y
 # CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=y
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
 CONFIG_CRYPTO_SHA1=m
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
@@ -1638,6 +1690,7 @@ CONFIG_CRYPTO_DES=y
 # CONFIG_CRYPTO_LZO is not set
 CONFIG_CRYPTO_HW=y
 # CONFIG_CRYPTO_DEV_HIFN_795X is not set
-# CONFIG_PPC_CLOCK is not set
+# CONFIG_CRYPTO_DEV_TALITOS is not set
+CONFIG_PPC_CLOCK=y
 CONFIG_PPC_LIB_RHEAP=y
 # CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/mpc8610_hpcd_defconfig b/arch/powerpc/configs/mpc8610_hpcd_defconfig
index cdf98ae3682b..1a9990731eb0 100644
--- a/arch/powerpc/configs/mpc8610_hpcd_defconfig
+++ b/arch/powerpc/configs/mpc8610_hpcd_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26
-# Tue Jul 15 08:31:01 2008
+# Linux kernel version: 2.6.27-rc4
+# Thu Aug 21 00:52:10 2008
 #
 # CONFIG_PPC64 is not set
 
@@ -32,6 +32,7 @@ CONFIG_GENERIC_HARDIRQS=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
@@ -91,7 +92,6 @@ CONFIG_INITRAMFS_SOURCE=""
 CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
 CONFIG_KALLSYMS_EXTRA_PASS=y
@@ -118,10 +118,16 @@ CONFIG_SLUB=y
 # CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
+CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_DMA_ATTRS=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
+# CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+# CONFIG_HAVE_CLK is not set
 CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
@@ -138,6 +144,7 @@ CONFIG_BLOCK=y
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -159,9 +166,8 @@ CONFIG_CLASSIC_RCU=y
 CONFIG_PPC_MULTIPLATFORM=y
 CONFIG_CLASSIC32=y
 CONFIG_PPC_CHRP=y
-# CONFIG_PPC_MPC512x is not set
-# CONFIG_PPC_MPC5121 is not set
 # CONFIG_MPC5121_ADS is not set
+# CONFIG_MPC5121_GENERIC is not set
 # CONFIG_PPC_MPC52xx is not set
 CONFIG_PPC_PMAC=y
 # CONFIG_PPC_CELL is not set
@@ -207,7 +213,7 @@ CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
 # CONFIG_HZ_300 is not set
 CONFIG_HZ_1000=y
 CONFIG_HZ=1000
-# CONFIG_SCHED_HRTICK is not set
+CONFIG_SCHED_HRTICK=y
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
@@ -230,6 +236,7 @@ CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_MIGRATION=y
 # CONFIG_RESOURCES_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
@@ -237,6 +244,7 @@ CONFIG_VIRT_TO_BUS=y
 CONFIG_FORCE_MAX_ZONEORDER=12
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
+CONFIG_EXTRA_TARGETS=""
 # CONFIG_PM is not set
 # CONFIG_SECCOMP is not set
 CONFIG_ISA_DMA_API=y
@@ -278,10 +286,6 @@ CONFIG_PAGE_OFFSET=0xc0000000
 CONFIG_KERNEL_START=0xc0000000
 CONFIG_PHYSICAL_START=0x00000000
 CONFIG_TASK_SIZE=0xc0000000
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -391,6 +395,8 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_DEBUG_DRIVER is not set
 # CONFIG_DEBUG_DEVRES is not set
 # CONFIG_SYS_HYPERVISOR is not set
@@ -503,18 +509,17 @@ CONFIG_BLK_DEV_RAM_SIZE=131072
 # CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_PHANTOM is not set
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_HP_ILO is not set
 CONFIG_HAVE_IDE=y
 CONFIG_IDE=y
-CONFIG_IDE_MAX_HWIFS=4
 # CONFIG_BLK_DEV_IDE is not set
-# CONFIG_BLK_DEV_HD_ONLY is not set
-# CONFIG_BLK_DEV_HD is not set
 
 #
 # SCSI device support
@@ -593,6 +598,7 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_MESH is not set
 # CONFIG_SCSI_MAC53C94 is not set
 # CONFIG_SCSI_SRP is not set
+# CONFIG_SCSI_DH is not set
 CONFIG_ATA=y
 # CONFIG_ATA_NONSTANDARD is not set
 CONFIG_SATA_PMP=y
@@ -669,7 +675,6 @@ CONFIG_PATA_ALI=y
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 CONFIG_DUMMY=y
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -756,12 +761,14 @@ CONFIG_SERIO_SERPORT=y
 # CONFIG_SERIO_PCIPS2 is not set
 CONFIG_SERIO_LIBPS2=y
 # CONFIG_SERIO_RAW is not set
+# CONFIG_SERIO_XILINX_XPS_PS2 is not set
 # CONFIG_GAMEPORT is not set
 
 #
 # Character devices
 #
 CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
 # CONFIG_VT_HW_CONSOLE_BINDING is not set
@@ -807,44 +814,69 @@ CONFIG_DEVPORT=y
 CONFIG_I2C=y
 CONFIG_I2C_BOARDINFO=y
 # CONFIG_I2C_CHARDEV is not set
+CONFIG_I2C_HELPER_AUTO=y
 
 #
 # I2C Hardware Bus support
 #
+
+#
+# PC SMBus host controller drivers
+#
 # CONFIG_I2C_ALI1535 is not set
 # CONFIG_I2C_ALI1563 is not set
 # CONFIG_I2C_ALI15X3 is not set
 # CONFIG_I2C_AMD756 is not set
 # CONFIG_I2C_AMD8111 is not set
-# CONFIG_I2C_HYDRA is not set
 # CONFIG_I2C_I801 is not set
-# CONFIG_I2C_I810 is not set
+# CONFIG_I2C_ISCH is not set
 # CONFIG_I2C_PIIX4 is not set
-CONFIG_I2C_POWERMAC=y
-CONFIG_I2C_MPC=y
 # CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_PROSAVAGE is not set
-# CONFIG_I2C_SAVAGE4 is not set
-# CONFIG_I2C_SIMTEC is not set
 # CONFIG_I2C_SIS5595 is not set
 # CONFIG_I2C_SIS630 is not set
 # CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_STUB is not set
 # CONFIG_I2C_VIA is not set
 # CONFIG_I2C_VIAPRO is not set
+
+#
+# Mac SMBus host controller drivers
+#
+# CONFIG_I2C_HYDRA is not set
+CONFIG_I2C_POWERMAC=y
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+CONFIG_I2C_MPC=y
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+
+#
+# Graphics adapter I2C/DDC channel drivers
+#
 # CONFIG_I2C_VOODOO3 is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
 # CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
 
 #
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
+# CONFIG_AT24 is not set
 # CONFIG_SENSORS_EEPROM is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
@@ -853,6 +885,8 @@ CONFIG_I2C_MPC=y
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
 # CONFIG_SPI is not set
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+# CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
@@ -869,8 +903,10 @@ CONFIG_SSB_POSSIBLE=y
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
 
 #
 # Multimedia devices
@@ -945,6 +981,7 @@ CONFIG_FB_CFB_IMAGEBLIT=y
 # CONFIG_FB_TRIDENT is not set
 # CONFIG_FB_ARK is not set
 # CONFIG_FB_PM3 is not set
+# CONFIG_FB_CARMINE is not set
 CONFIG_FB_FSL_DIU=y
 # CONFIG_FB_IBM_GXT4500 is not set
 # CONFIG_FB_VIRTUAL is not set
@@ -963,15 +1000,7 @@ CONFIG_VGA_CONSOLE=y
 CONFIG_DUMMY_CONSOLE=y
 # CONFIG_FRAMEBUFFER_CONSOLE is not set
 # CONFIG_LOGO is not set
-
-#
-# Sound
-#
 CONFIG_SOUND=y
-
-#
-# Advanced Linux Sound Architecture
-#
 CONFIG_SND=y
 CONFIG_SND_TIMER=y
 CONFIG_SND_PCM=y
@@ -985,18 +1014,12 @@ CONFIG_SND_PCM_OSS_PLUGINS=y
 CONFIG_SND_VERBOSE_PROCFS=y
 # CONFIG_SND_VERBOSE_PRINTK is not set
 # CONFIG_SND_DEBUG is not set
-
-#
-# Generic devices
-#
+CONFIG_SND_DRIVERS=y
 # CONFIG_SND_DUMMY is not set
 # CONFIG_SND_MTPAV is not set
 # CONFIG_SND_SERIAL_U16550 is not set
 # CONFIG_SND_MPU401 is not set
-
-#
-# PCI devices
-#
+CONFIG_SND_PCI=y
 # CONFIG_SND_AD1889 is not set
 # CONFIG_SND_ALS300 is not set
 # CONFIG_SND_ALS4000 is not set
@@ -1058,42 +1081,14 @@ CONFIG_SND_VERBOSE_PROCFS=y
 # CONFIG_SND_VIRTUOSO is not set
 # CONFIG_SND_VX222 is not set
 # CONFIG_SND_YMFPCI is not set
-
-#
-# ALSA PowerMac devices
-#
+CONFIG_SND_PPC=y
 # CONFIG_SND_POWERMAC is not set
-
-#
-# ALSA PowerPC devices
-#
-
-#
-# Apple Onboard Audio driver
-#
 # CONFIG_SND_AOA is not set
-# CONFIG_SND_AOA_SOUNDBUS is not set
-
-#
-# System on Chip audio support
-#
 CONFIG_SND_SOC=y
-
-#
-# ALSA SoC audio for Freescale SOCs
-#
 CONFIG_SND_SOC_MPC8610=y
 CONFIG_SND_SOC_MPC8610_HPCD=y
-
-#
-# SoC Audio for the Texas Instruments OMAP
-#
 CONFIG_SND_SOC_CS4270=y
 CONFIG_SND_SOC_CS4270_VD33_ERRATA=y
-
-#
-# Open Sound System
-#
 # CONFIG_SOUND_PRIME is not set
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
@@ -1108,6 +1103,10 @@ CONFIG_USB_ARCH_HAS_EHCI=y
 # CONFIG_USB_OTG_BLACKLIST_HUB is not set
 
 #
+# Enable Host or Gadget support to see Inventra options
+#
+
+#
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
 #
 # CONFIG_USB_GADGET is not set
@@ -1235,6 +1234,7 @@ CONFIG_TMPFS=y
 # CONFIG_CRAMFS is not set
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
 # CONFIG_ROMFS_FS is not set
@@ -1245,16 +1245,15 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 # CONFIG_NFS_V4 is not set
+CONFIG_ROOT_NFS=y
 CONFIG_NFSD=y
 # CONFIG_NFSD_V3 is not set
 # CONFIG_NFSD_V4 is not set
-CONFIG_ROOT_NFS=y
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_EXPORTFS=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -1334,6 +1333,7 @@ CONFIG_BITREVERSE=y
 # CONFIG_GENERIC_FIND_FIRST_BIT is not set
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
+CONFIG_CRC_T10DIF=y
 # CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
@@ -1358,6 +1358,8 @@ CONFIG_FRAME_WARN=1024
 CONFIG_DEBUG_KERNEL=y
 CONFIG_DEBUG_SHIRQ=y
 CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
 CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
@@ -1376,19 +1378,29 @@ CONFIG_DEBUG_BUGVERBOSE=y
 CONFIG_DEBUG_INFO=y
 # CONFIG_DEBUG_VM is not set
 # CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+# CONFIG_FTRACE is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
 # CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
 # CONFIG_DEBUG_PAGEALLOC is not set
-# CONFIG_DEBUGGER is not set
 # CONFIG_CODE_PATCHING_SELFTEST is not set
 # CONFIG_FTR_FIXUP_SELFTEST is not set
+# CONFIG_XMON is not set
 # CONFIG_IRQSTACKS is not set
 # CONFIG_BDI_SWITCH is not set
 # CONFIG_BOOTX_TEXT is not set
@@ -1443,6 +1455,10 @@ CONFIG_CRYPTO=y
 # CONFIG_CRYPTO_MD4 is not set
 # CONFIG_CRYPTO_MD5 is not set
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
 # CONFIG_CRYPTO_SHA1 is not set
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
@@ -1475,6 +1491,7 @@ CONFIG_CRYPTO=y
 # CONFIG_CRYPTO_LZO is not set
 CONFIG_CRYPTO_HW=y
 # CONFIG_CRYPTO_DEV_HIFN_795X is not set
+# CONFIG_CRYPTO_DEV_TALITOS is not set
 # CONFIG_PPC_CLOCK is not set
 CONFIG_PPC_LIB_RHEAP=y
 # CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/mpc8641_hpcn_defconfig b/arch/powerpc/configs/mpc8641_hpcn_defconfig
index 867b8c0215f3..ea09be31b6ea 100644
--- a/arch/powerpc/configs/mpc8641_hpcn_defconfig
+++ b/arch/powerpc/configs/mpc8641_hpcn_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc5
-# Mon Jun  9 08:52:15 2008
+# Linux kernel version: 2.6.27-rc4
+# Thu Aug 21 00:52:11 2008
 #
 # CONFIG_PPC64 is not set
 
@@ -33,6 +33,7 @@ CONFIG_GENERIC_HARDIRQS=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
@@ -92,7 +93,6 @@ CONFIG_INITRAMFS_SOURCE=""
 CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
 CONFIG_KALLSYMS_EXTRA_PASS=y
@@ -100,6 +100,7 @@ CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
+CONFIG_PCSPKR_PLATFORM=y
 CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
@@ -118,10 +119,16 @@ CONFIG_SLUB=y
 # CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
+CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
 # CONFIG_HAVE_DMA_ATTRS is not set
+CONFIG_USE_GENERIC_SMP_HELPERS=y
+# CONFIG_HAVE_CLK is not set
 CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
@@ -139,6 +146,7 @@ CONFIG_LBD=y
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -157,30 +165,40 @@ CONFIG_CLASSIC_RCU=y
 #
 # Platform support
 #
-# CONFIG_PPC_MULTIPLATFORM is not set
-# CONFIG_PPC_82xx is not set
-# CONFIG_PPC_83xx is not set
-CONFIG_PPC_86xx=y
-# CONFIG_PPC_MPC512x is not set
-# CONFIG_PPC_MPC5121 is not set
+CONFIG_PPC_MULTIPLATFORM=y
+CONFIG_CLASSIC32=y
+CONFIG_PPC_CHRP=y
+# CONFIG_MPC5121_ADS is not set
+# CONFIG_MPC5121_GENERIC is not set
+# CONFIG_PPC_MPC52xx is not set
+CONFIG_PPC_PMAC=y
 # CONFIG_PPC_CELL is not set
 # CONFIG_PPC_CELL_NATIVE is not set
+# CONFIG_PPC_82xx is not set
 # CONFIG_PQ2ADS is not set
+# CONFIG_PPC_83xx is not set
+CONFIG_PPC_86xx=y
 CONFIG_MPC8641_HPCN=y
 # CONFIG_SBC8641D is not set
 # CONFIG_MPC8610_HPCD is not set
 CONFIG_MPC8641=y
+CONFIG_PPC_NATIVE=y
+# CONFIG_UDBG_RTAS_CONSOLE is not set
 # CONFIG_IPIC is not set
 CONFIG_MPIC=y
 # CONFIG_MPIC_WEIRD is not set
 CONFIG_PPC_I8259=y
-# CONFIG_PPC_RTAS is not set
+CONFIG_PPC_RTAS=y
+# CONFIG_RTAS_ERROR_LOGGING is not set
+CONFIG_RTAS_PROC=y
 # CONFIG_MMIO_NVRAM is not set
-# CONFIG_PPC_MPC106 is not set
+CONFIG_PPC_MPC106=y
 # CONFIG_PPC_970_NAP is not set
 # CONFIG_PPC_INDIRECT_IO is not set
 # CONFIG_GENERIC_IOMAP is not set
 # CONFIG_CPU_FREQ is not set
+# CONFIG_PPC601_SYNC_FIX is not set
+# CONFIG_TAU is not set
 CONFIG_FSL_ULI1575=y
 
 #
@@ -196,16 +214,18 @@ CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
 # CONFIG_HZ_300 is not set
 CONFIG_HZ_1000=y
 CONFIG_HZ=1000
-# CONFIG_SCHED_HRTICK is not set
+CONFIG_SCHED_HRTICK=y
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
 CONFIG_BINFMT_ELF=y
 CONFIG_BINFMT_MISC=m
 # CONFIG_IOMMU_HELPER is not set
+# CONFIG_HOTPLUG_CPU is not set
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_HAS_WALK_MEMORY=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+# CONFIG_KEXEC is not set
 # CONFIG_IRQ_ALL_CPUS is not set
 CONFIG_ARCH_FLATMEM_ENABLE=y
 CONFIG_ARCH_POPULATES_NODE_MAP=y
@@ -219,6 +239,7 @@ CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_MIGRATION=y
 # CONFIG_RESOURCES_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
@@ -226,6 +247,7 @@ CONFIG_VIRT_TO_BUS=y
 CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
+CONFIG_EXTRA_TARGETS=""
 # CONFIG_PM is not set
 CONFIG_SECCOMP=y
 CONFIG_ISA_DMA_API=y
@@ -233,11 +255,13 @@ CONFIG_ISA_DMA_API=y
 #
 # Bus options
 #
+# CONFIG_ISA is not set
 CONFIG_ZONE_DMA=y
 CONFIG_GENERIC_ISA_DMA=y
 CONFIG_PPC_INDIRECT_PCI=y
 CONFIG_FSL_SOC=y
 CONFIG_FSL_PCI=y
+CONFIG_PPC_PCI_CHOICE=y
 CONFIG_PCI=y
 CONFIG_PCI_DOMAINS=y
 CONFIG_PCI_SYSCALL=y
@@ -264,10 +288,6 @@ CONFIG_PAGE_OFFSET=0xc0000000
 CONFIG_KERNEL_START=0xc0000000
 CONFIG_PHYSICAL_START=0x00000000
 CONFIG_TASK_SIZE=0xc0000000
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -393,6 +413,8 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_DEBUG_DRIVER is not set
 # CONFIG_DEBUG_DEVRES is not set
 # CONFIG_SYS_HYPERVISOR is not set
@@ -403,6 +425,7 @@ CONFIG_OF_I2C=y
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_FD is not set
+# CONFIG_MAC_FLOPPY is not set
 # CONFIG_BLK_CPQ_DA is not set
 # CONFIG_BLK_CPQ_CISS_DA is not set
 # CONFIG_BLK_DEV_DAC960 is not set
@@ -419,12 +442,14 @@ CONFIG_BLK_DEV_RAM_SIZE=131072
 # CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_PHANTOM is not set
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_HP_ILO is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -503,7 +528,10 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_DC390T is not set
 # CONFIG_SCSI_NSP32 is not set
 # CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_MESH is not set
+# CONFIG_SCSI_MAC53C94 is not set
 # CONFIG_SCSI_SRP is not set
+# CONFIG_SCSI_DH is not set
 CONFIG_ATA=y
 # CONFIG_ATA_NONSTANDARD is not set
 CONFIG_SATA_PMP=y
@@ -571,12 +599,15 @@ CONFIG_PATA_ALI=y
 #
 # IEEE 1394 (FireWire) support
 #
+
+#
+# Enable only one of the two stacks, unless you know what you are doing
+#
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 CONFIG_DUMMY=y
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -603,6 +634,8 @@ CONFIG_VITESSE_PHY=y
 # CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
+# CONFIG_MACE is not set
+# CONFIG_BMAC is not set
 # CONFIG_HAPPYMEAL is not set
 # CONFIG_SUNGEM is not set
 # CONFIG_CASSINI is not set
@@ -620,7 +653,6 @@ CONFIG_NETDEV_1000=y
 # CONFIG_DL2K is not set
 # CONFIG_E1000 is not set
 # CONFIG_E1000E is not set
-# CONFIG_E1000E_ENABLED is not set
 # CONFIG_IP1000 is not set
 # CONFIG_IGB is not set
 # CONFIG_NS83820 is not set
@@ -634,9 +666,10 @@ CONFIG_NETDEV_1000=y
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
 CONFIG_GIANFAR=y
-CONFIG_GFAR_NAPI=y
+# CONFIG_MV643XX_ETH is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
+# CONFIG_ATL1E is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
 # CONFIG_CHELSIO_T3 is not set
@@ -713,12 +746,14 @@ CONFIG_SERIO_SERPORT=y
 # CONFIG_SERIO_PCIPS2 is not set
 CONFIG_SERIO_LIBPS2=y
 # CONFIG_SERIO_RAW is not set
+# CONFIG_SERIO_XILINX_XPS_PS2 is not set
 # CONFIG_GAMEPORT is not set
 
 #
 # Character devices
 #
 CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
 # CONFIG_VT_HW_CONSOLE_BINDING is not set
@@ -746,11 +781,14 @@ CONFIG_SERIAL_8250_RSA=y
 # CONFIG_SERIAL_UARTLITE is not set
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_PMACZILOG is not set
 # CONFIG_SERIAL_JSM is not set
 # CONFIG_SERIAL_OF_PLATFORM is not set
 CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_BRIQ_PANEL is not set
+# CONFIG_HVC_RTAS is not set
 # CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
 CONFIG_NVRAM=y
@@ -762,43 +800,70 @@ CONFIG_DEVPORT=y
 CONFIG_I2C=y
 CONFIG_I2C_BOARDINFO=y
 # CONFIG_I2C_CHARDEV is not set
+CONFIG_I2C_HELPER_AUTO=y
 
 #
 # I2C Hardware Bus support
 #
+
+#
+# PC SMBus host controller drivers
+#
 # CONFIG_I2C_ALI1535 is not set
 # CONFIG_I2C_ALI1563 is not set
 # CONFIG_I2C_ALI15X3 is not set
 # CONFIG_I2C_AMD756 is not set
 # CONFIG_I2C_AMD8111 is not set
 # CONFIG_I2C_I801 is not set
-# CONFIG_I2C_I810 is not set
+# CONFIG_I2C_ISCH is not set
 # CONFIG_I2C_PIIX4 is not set
-CONFIG_I2C_MPC=y
 # CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_PROSAVAGE is not set
-# CONFIG_I2C_SAVAGE4 is not set
-# CONFIG_I2C_SIMTEC is not set
 # CONFIG_I2C_SIS5595 is not set
 # CONFIG_I2C_SIS630 is not set
 # CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_TINY_USB is not set
 # CONFIG_I2C_VIA is not set
 # CONFIG_I2C_VIAPRO is not set
+
+#
+# Mac SMBus host controller drivers
+#
+# CONFIG_I2C_HYDRA is not set
+CONFIG_I2C_POWERMAC=y
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+CONFIG_I2C_MPC=y
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Graphics adapter I2C/DDC channel drivers
+#
 # CONFIG_I2C_VOODOO3 is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
 # CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
 
 #
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
+# CONFIG_AT24 is not set
 CONFIG_SENSORS_EEPROM=y
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
@@ -807,10 +872,13 @@ CONFIG_SENSORS_EEPROM=y
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
 # CONFIG_SPI is not set
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+# CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 # CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
 
 #
@@ -822,8 +890,10 @@ CONFIG_SSB_POSSIBLE=y
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
 
 #
 # Multimedia devices
@@ -865,6 +935,7 @@ CONFIG_DVB_CAPTURE_DRIVERS=y
 # CONFIG_DVB_TTUSB_BUDGET is not set
 # CONFIG_DVB_TTUSB_DEC is not set
 # CONFIG_DVB_CINERGYT2 is not set
+# CONFIG_DVB_SIANO_SMS1XXX is not set
 
 #
 # Supported FlexCopII (B2C2) Adapters
@@ -911,6 +982,7 @@ CONFIG_DVB_CAPTURE_DRIVERS=y
 # CONFIG_DVB_SP887X is not set
 # CONFIG_DVB_CX22700 is not set
 # CONFIG_DVB_CX22702 is not set
+# CONFIG_DVB_DRX397XD is not set
 # CONFIG_DVB_L64781 is not set
 # CONFIG_DVB_TDA1004X is not set
 # CONFIG_DVB_NXT6000 is not set
@@ -978,15 +1050,7 @@ CONFIG_VIDEO_OUTPUT_CONTROL=y
 CONFIG_VGA_CONSOLE=y
 # CONFIG_VGACON_SOFT_SCROLLBACK is not set
 CONFIG_DUMMY_CONSOLE=y
-
-#
-# Sound
-#
 CONFIG_SOUND=y
-
-#
-# Advanced Linux Sound Architecture
-#
 CONFIG_SND=y
 CONFIG_SND_TIMER=y
 CONFIG_SND_PCM=y
@@ -1000,19 +1064,15 @@ CONFIG_SND_PCM_OSS_PLUGINS=y
 CONFIG_SND_VERBOSE_PROCFS=y
 # CONFIG_SND_VERBOSE_PRINTK is not set
 # CONFIG_SND_DEBUG is not set
-
-#
-# Generic devices
-#
+CONFIG_SND_VMASTER=y
 CONFIG_SND_AC97_CODEC=y
+CONFIG_SND_DRIVERS=y
 # CONFIG_SND_DUMMY is not set
 # CONFIG_SND_MTPAV is not set
 # CONFIG_SND_SERIAL_U16550 is not set
 # CONFIG_SND_MPU401 is not set
-
-#
-# PCI devices
-#
+# CONFIG_SND_AC97_POWER_SAVE is not set
+CONFIG_SND_PCI=y
 # CONFIG_SND_AD1889 is not set
 # CONFIG_SND_ALS300 is not set
 # CONFIG_SND_ALS4000 is not set
@@ -1074,39 +1134,14 @@ CONFIG_SND_INTEL8X0=y
 # CONFIG_SND_VIRTUOSO is not set
 # CONFIG_SND_VX222 is not set
 # CONFIG_SND_YMFPCI is not set
-# CONFIG_SND_AC97_POWER_SAVE is not set
-
-#
-# ALSA PowerMac devices
-#
-
-#
-# ALSA PowerPC devices
-#
-
-#
-# USB devices
-#
+CONFIG_SND_PPC=y
+# CONFIG_SND_POWERMAC is not set
+# CONFIG_SND_AOA is not set
+CONFIG_SND_USB=y
 # CONFIG_SND_USB_AUDIO is not set
 # CONFIG_SND_USB_USX2Y is not set
 # CONFIG_SND_USB_CAIAQ is not set
-
-#
-# System on Chip audio support
-#
 # CONFIG_SND_SOC is not set
-
-#
-# ALSA SoC audio for Freescale SOCs
-#
-
-#
-# SoC Audio for the Texas Instruments OMAP
-#
-
-#
-# Open Sound System
-#
 # CONFIG_SOUND_PRIME is not set
 CONFIG_AC97_BUS=y
 CONFIG_HID_SUPPORT=y
@@ -1138,6 +1173,7 @@ CONFIG_USB_DEVICE_CLASS=y
 # CONFIG_USB_OTG is not set
 # CONFIG_USB_OTG_WHITELIST is not set
 # CONFIG_USB_OTG_BLACKLIST_HUB is not set
+CONFIG_USB_MON=y
 
 #
 # USB Host Controller Drivers
@@ -1189,6 +1225,7 @@ CONFIG_USB_STORAGE=y
 # CONFIG_USB_STORAGE_ALAUDA is not set
 # CONFIG_USB_STORAGE_ONETOUCH is not set
 # CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_SIERRA is not set
 # CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
 # CONFIG_USB_LIBUSUAL is not set
 
@@ -1197,7 +1234,6 @@ CONFIG_USB_STORAGE=y
 #
 # CONFIG_USB_MDC800 is not set
 # CONFIG_USB_MICROTEK is not set
-CONFIG_USB_MON=y
 
 #
 # USB port drivers
@@ -1210,7 +1246,6 @@ CONFIG_USB_MON=y
 # CONFIG_USB_EMI62 is not set
 # CONFIG_USB_EMI26 is not set
 # CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_AUERSWALD is not set
 # CONFIG_USB_RIO500 is not set
 # CONFIG_USB_LEGOTOWER is not set
 # CONFIG_USB_LCD is not set
@@ -1264,6 +1299,7 @@ CONFIG_RTC_INTF_DEV=y
 # CONFIG_RTC_DRV_PCF8583 is not set
 # CONFIG_RTC_DRV_M41T80 is not set
 # CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
 
 #
 # SPI RTC drivers
@@ -1362,6 +1398,7 @@ CONFIG_EFS_FS=m
 CONFIG_CRAMFS=y
 CONFIG_VXFS_FS=m
 # CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 CONFIG_HPFS_FS=m
 CONFIG_QNX4FS_FS=m
 # CONFIG_ROMFS_FS is not set
@@ -1374,17 +1411,16 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
+CONFIG_ROOT_NFS=y
 CONFIG_NFSD=y
 # CONFIG_NFSD_V3 is not set
 # CONFIG_NFSD_V4 is not set
-CONFIG_ROOT_NFS=y
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_EXPORTFS=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_BIND34 is not set
 CONFIG_RPCSEC_GSS_KRB5=y
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -1463,6 +1499,7 @@ CONFIG_BITREVERSE=y
 # CONFIG_GENERIC_FIND_FIRST_BIT is not set
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
+CONFIG_CRC_T10DIF=y
 CONFIG_CRC_ITU_T=m
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
@@ -1488,6 +1525,8 @@ CONFIG_FRAME_WARN=1024
 CONFIG_DEBUG_KERNEL=y
 # CONFIG_DEBUG_SHIRQ is not set
 CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
 CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
@@ -1506,19 +1545,32 @@ CONFIG_SCHED_DEBUG=y
 CONFIG_DEBUG_INFO=y
 # CONFIG_DEBUG_VM is not set
 # CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+# CONFIG_FTRACE is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
 # CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
 # CONFIG_DEBUG_PAGEALLOC is not set
-# CONFIG_DEBUGGER is not set
+# CONFIG_CODE_PATCHING_SELFTEST is not set
+# CONFIG_FTR_FIXUP_SELFTEST is not set
+# CONFIG_XMON is not set
 # CONFIG_IRQSTACKS is not set
 # CONFIG_BDI_SWITCH is not set
+# CONFIG_BOOTX_TEXT is not set
 # CONFIG_PPC_EARLY_DEBUG is not set
 
 #
@@ -1573,6 +1625,10 @@ CONFIG_CRYPTO_HMAC=y
 # CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=y
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
 CONFIG_CRYPTO_SHA1=m
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
@@ -1605,5 +1661,6 @@ CONFIG_CRYPTO_DES=y
 # CONFIG_CRYPTO_LZO is not set
 CONFIG_CRYPTO_HW=y
 # CONFIG_CRYPTO_DEV_HIFN_795X is not set
+# CONFIG_CRYPTO_DEV_TALITOS is not set
 # CONFIG_PPC_CLOCK is not set
 # CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/mpc866_ads_defconfig b/arch/powerpc/configs/mpc866_ads_defconfig
index 46fffbcd3f99..1501c4336b3d 100644
--- a/arch/powerpc/configs/mpc866_ads_defconfig
+++ b/arch/powerpc/configs/mpc866_ads_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc5
-# Mon Jun  9 08:52:16 2008
+# Linux kernel version: 2.6.27-rc4
+# Thu Aug 21 00:52:11 2008
 #
 # CONFIG_PPC64 is not set
 
@@ -29,6 +29,7 @@ CONFIG_GENERIC_HARDIRQS=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
@@ -106,10 +107,16 @@ CONFIG_SLUB=y
 # CONFIG_PROFILING is not set
 # CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
+CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
 # CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+CONFIG_HAVE_CLK=y
 CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
@@ -120,6 +127,7 @@ CONFIG_BLOCK=y
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -138,8 +146,6 @@ CONFIG_CLASSIC_RCU=y
 #
 # Platform support
 #
-# CONFIG_PPC_MPC512x is not set
-# CONFIG_PPC_MPC5121 is not set
 # CONFIG_PPC_CELL is not set
 # CONFIG_PPC_CELL_NATIVE is not set
 CONFIG_CPM1=y
@@ -157,6 +163,7 @@ CONFIG_MPC86XADS=y
 # Generic MPC8xx Options
 #
 CONFIG_8xx_COPYBACK=y
+# CONFIG_8xx_GPIO is not set
 CONFIG_8xx_CPU6=y
 CONFIG_8xx_CPU15=y
 CONFIG_NO_UCODE_PATCH=y
@@ -175,7 +182,6 @@ CONFIG_NO_UCODE_PATCH=y
 # CONFIG_PPC_INDIRECT_IO is not set
 # CONFIG_GENERIC_IOMAP is not set
 # CONFIG_CPU_FREQ is not set
-CONFIG_PPC_CPM_NEW_BINDING=y
 # CONFIG_FSL_ULI1575 is not set
 CONFIG_CPM=y
 
@@ -192,7 +198,7 @@ CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
 # CONFIG_HZ_300 is not set
 CONFIG_HZ_1000=y
 CONFIG_HZ=1000
-# CONFIG_SCHED_HRTICK is not set
+CONFIG_SCHED_HRTICK=y
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
@@ -215,6 +221,7 @@ CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_MIGRATION=y
 # CONFIG_RESOURCES_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
@@ -222,6 +229,7 @@ CONFIG_VIRT_TO_BUS=y
 CONFIG_FORCE_MAX_ZONEORDER=11
 # CONFIG_PROC_DEVICETREE is not set
 # CONFIG_CMDLINE_BOOL is not set
+CONFIG_EXTRA_TARGETS=""
 # CONFIG_PM is not set
 # CONFIG_SECCOMP is not set
 CONFIG_ISA_DMA_API=y
@@ -253,10 +261,6 @@ CONFIG_PHYSICAL_START=0x00000000
 CONFIG_TASK_SIZE=0x80000000
 CONFIG_CONSISTENT_START=0xfd000000
 CONFIG_CONSISTENT_SIZE=0x00200000
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -361,6 +365,7 @@ CONFIG_BLK_DEV_LOOP=y
 # CONFIG_BLK_DEV_RAM is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
@@ -378,7 +383,6 @@ CONFIG_HAVE_IDE=y
 # CONFIG_MD is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -414,7 +418,6 @@ CONFIG_FS_ENET_HAS_SCC=y
 CONFIG_FS_ENET_HAS_FEC=y
 CONFIG_FS_ENET_MDIO_FEC=y
 CONFIG_NETDEV_1000=y
-# CONFIG_E1000E_ENABLED is not set
 # CONFIG_GIANFAR is not set
 CONFIG_NETDEV_10000=y
 
@@ -484,6 +487,7 @@ CONFIG_SERIO_I8042=y
 CONFIG_SERIO_SERPORT=y
 CONFIG_SERIO_LIBPS2=y
 # CONFIG_SERIO_RAW is not set
+# CONFIG_SERIO_XILINX_XPS_PS2 is not set
 # CONFIG_GAMEPORT is not set
 
 #
@@ -524,6 +528,8 @@ CONFIG_GEN_RTC=y
 # CONFIG_TCG_TPM is not set
 # CONFIG_I2C is not set
 # CONFIG_SPI is not set
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+# CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 CONFIG_HWMON=y
@@ -540,6 +546,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_W83627EHF is not set
 # CONFIG_HWMON_DEBUG_CHIP is not set
 # CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
 
 #
@@ -551,8 +558,10 @@ CONFIG_SSB_POSSIBLE=y
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
 
 #
 # Multimedia devices
@@ -582,10 +591,6 @@ CONFIG_VIDEO_OUTPUT_CONTROL=y
 # Display device support
 #
 # CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Sound
-#
 # CONFIG_SOUND is not set
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
@@ -599,6 +604,10 @@ CONFIG_USB_SUPPORT=y
 # CONFIG_USB_OTG_BLACKLIST_HUB is not set
 
 #
+# Enable Host or Gadget support to see Inventra options
+#
+
+#
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
 #
 # CONFIG_USB_GADGET is not set
@@ -677,6 +686,7 @@ CONFIG_TMPFS=y
 CONFIG_CRAMFS=y
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
 # CONFIG_ROMFS_FS is not set
@@ -687,13 +697,12 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 # CONFIG_NFS_V4 is not set
-# CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -733,6 +742,7 @@ CONFIG_BITREVERSE=y
 # CONFIG_GENERIC_FIND_FIRST_BIT is not set
 CONFIG_CRC_CCITT=y
 # CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
 # CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
@@ -758,7 +768,15 @@ CONFIG_FRAME_WARN=1024
 # CONFIG_DEBUG_KERNEL is not set
 # CONFIG_SLUB_DEBUG_ON is not set
 # CONFIG_SLUB_STATS is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+# CONFIG_FTRACE is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
 # CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_IRQSTACKS is not set
 # CONFIG_PPC_EARLY_DEBUG is not set
 
@@ -810,6 +828,10 @@ CONFIG_CRYPTO=y
 # CONFIG_CRYPTO_MD4 is not set
 # CONFIG_CRYPTO_MD5 is not set
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
 # CONFIG_CRYPTO_SHA1 is not set
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
@@ -841,6 +863,7 @@ CONFIG_CRYPTO=y
 # CONFIG_CRYPTO_DEFLATE is not set
 # CONFIG_CRYPTO_LZO is not set
 CONFIG_CRYPTO_HW=y
-# CONFIG_PPC_CLOCK is not set
+# CONFIG_CRYPTO_DEV_TALITOS is not set
+CONFIG_PPC_CLOCK=y
 CONFIG_PPC_LIB_RHEAP=y
 # CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/mpc885_ads_defconfig b/arch/powerpc/configs/mpc885_ads_defconfig
index 9df78973005e..fc3f6dc58126 100644
--- a/arch/powerpc/configs/mpc885_ads_defconfig
+++ b/arch/powerpc/configs/mpc885_ads_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc5
-# Mon Jun  9 08:52:17 2008
+# Linux kernel version: 2.6.27-rc4
+# Thu Aug 21 00:52:12 2008
 #
 # CONFIG_PPC64 is not set
 
@@ -29,6 +29,7 @@ CONFIG_GENERIC_HARDIRQS=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
@@ -108,10 +109,16 @@ CONFIG_SLUB=y
 # CONFIG_PROFILING is not set
 # CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
+CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
 # CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+CONFIG_HAVE_CLK=y
 CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=1
@@ -121,6 +128,7 @@ CONFIG_BLOCK=y
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -139,8 +147,6 @@ CONFIG_CLASSIC_RCU=y
 #
 # Platform support
 #
-# CONFIG_PPC_MPC512x is not set
-# CONFIG_PPC_MPC5121 is not set
 # CONFIG_PPC_CELL is not set
 # CONFIG_PPC_CELL_NATIVE is not set
 CONFIG_CPM1=y
@@ -165,6 +171,7 @@ CONFIG_MPC8xx_SECOND_ETH_FEC2=y
 # Generic MPC8xx Options
 #
 CONFIG_8xx_COPYBACK=y
+# CONFIG_8xx_GPIO is not set
 # CONFIG_8xx_CPU6 is not set
 CONFIG_8xx_CPU15=y
 CONFIG_NO_UCODE_PATCH=y
@@ -183,7 +190,6 @@ CONFIG_NO_UCODE_PATCH=y
 # CONFIG_PPC_INDIRECT_IO is not set
 # CONFIG_GENERIC_IOMAP is not set
 # CONFIG_CPU_FREQ is not set
-CONFIG_PPC_CPM_NEW_BINDING=y
 # CONFIG_FSL_ULI1575 is not set
 CONFIG_CPM=y
 
@@ -200,7 +206,7 @@ CONFIG_HZ_100=y
 # CONFIG_HZ_300 is not set
 # CONFIG_HZ_1000 is not set
 CONFIG_HZ=100
-# CONFIG_SCHED_HRTICK is not set
+CONFIG_SCHED_HRTICK=y
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
@@ -224,6 +230,7 @@ CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_MIGRATION=y
 # CONFIG_RESOURCES_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
@@ -231,6 +238,7 @@ CONFIG_VIRT_TO_BUS=y
 CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
+CONFIG_EXTRA_TARGETS=""
 # CONFIG_PM is not set
 # CONFIG_SECCOMP is not set
 CONFIG_ISA_DMA_API=y
@@ -263,10 +271,6 @@ CONFIG_PHYSICAL_START=0x00000000
 CONFIG_TASK_SIZE=0x80000000
 CONFIG_CONSISTENT_START=0xfd000000
 CONFIG_CONSISTENT_SIZE=0x00200000
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -453,7 +457,6 @@ CONFIG_HAVE_IDE=y
 # CONFIG_MD is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -555,10 +558,13 @@ CONFIG_GEN_RTC=y
 # CONFIG_TCG_TPM is not set
 # CONFIG_I2C is not set
 # CONFIG_SPI is not set
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+# CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 # CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
 
 #
@@ -570,8 +576,10 @@ CONFIG_SSB_POSSIBLE=y
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
 
 #
 # Multimedia devices
@@ -601,10 +609,6 @@ CONFIG_DAB=y
 # Display device support
 #
 # CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Sound
-#
 # CONFIG_SOUND is not set
 # CONFIG_USB_SUPPORT is not set
 # CONFIG_MMC is not set
@@ -673,6 +677,7 @@ CONFIG_TMPFS=y
 CONFIG_CRAMFS=y
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
 # CONFIG_ROMFS_FS is not set
@@ -683,13 +688,12 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 # CONFIG_NFS_V4 is not set
-# CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -728,6 +732,7 @@ CONFIG_MSDOS_PARTITION=y
 # CONFIG_GENERIC_FIND_FIRST_BIT is not set
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
 # CONFIG_CRC_ITU_T is not set
 # CONFIG_CRC32 is not set
 # CONFIG_CRC7 is not set
@@ -752,6 +757,8 @@ CONFIG_MAGIC_SYSRQ=y
 CONFIG_DEBUG_KERNEL=y
 # CONFIG_DEBUG_SHIRQ is not set
 CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
 CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
@@ -767,16 +774,28 @@ CONFIG_DEBUG_BUGVERBOSE=y
 CONFIG_DEBUG_INFO=y
 # CONFIG_DEBUG_VM is not set
 # CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+# CONFIG_FTRACE is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
 # CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
 # CONFIG_DEBUG_PAGEALLOC is not set
-# CONFIG_DEBUGGER is not set
+# CONFIG_CODE_PATCHING_SELFTEST is not set
+# CONFIG_FTR_FIXUP_SELFTEST is not set
+# CONFIG_XMON is not set
 # CONFIG_IRQSTACKS is not set
 # CONFIG_BDI_SWITCH is not set
 # CONFIG_PPC_EARLY_DEBUG is not set
@@ -788,6 +807,6 @@ CONFIG_DEBUG_INFO=y
 # CONFIG_SECURITY is not set
 # CONFIG_SECURITY_FILE_CAPABILITIES is not set
 # CONFIG_CRYPTO is not set
-# CONFIG_PPC_CLOCK is not set
+CONFIG_PPC_CLOCK=y
 CONFIG_PPC_LIB_RHEAP=y
 # CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/pmac32_defconfig b/arch/powerpc/configs/pmac32_defconfig
index 3688e4bb6fc2..80481f270133 100644
--- a/arch/powerpc/configs/pmac32_defconfig
+++ b/arch/powerpc/configs/pmac32_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc3
-# Tue May 20 20:02:24 2008
+# Linux kernel version: 2.6.27-rc4
+# Tue Aug 26 13:20:26 2008
 #
 # CONFIG_PPC64 is not set
 
@@ -32,6 +32,7 @@ CONFIG_GENERIC_HARDIRQS=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
@@ -93,9 +94,8 @@ CONFIG_INITRAMFS_SOURCE=""
 CONFIG_SYSCTL=y
 # CONFIG_EMBEDDED is not set
 CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
+CONFIG_KALLSYMS_ALL=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
@@ -120,10 +120,16 @@ CONFIG_PROFILING=y
 CONFIG_OPROFILE=y
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
+CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
 # CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+# CONFIG_HAVE_CLK is not set
 CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
@@ -140,6 +146,7 @@ CONFIG_LBD=y
 # CONFIG_BLK_DEV_IO_TRACE is not set
 CONFIG_LSF=y
 CONFIG_BLK_DEV_BSG=y
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -159,19 +166,18 @@ CONFIG_CLASSIC_RCU=y
 # Platform support
 #
 CONFIG_PPC_MULTIPLATFORM=y
-# CONFIG_PPC_82xx is not set
-# CONFIG_PPC_83xx is not set
-# CONFIG_PPC_86xx is not set
 CONFIG_CLASSIC32=y
 # CONFIG_PPC_CHRP is not set
-# CONFIG_PPC_MPC512x is not set
-# CONFIG_PPC_MPC5121 is not set
 # CONFIG_MPC5121_ADS is not set
+# CONFIG_MPC5121_GENERIC is not set
 # CONFIG_PPC_MPC52xx is not set
 CONFIG_PPC_PMAC=y
 # CONFIG_PPC_CELL is not set
 # CONFIG_PPC_CELL_NATIVE is not set
+# CONFIG_PPC_82xx is not set
 # CONFIG_PQ2ADS is not set
+# CONFIG_PPC_83xx is not set
+# CONFIG_PPC_86xx is not set
 # CONFIG_EMBEDDED6xx is not set
 CONFIG_PPC_NATIVE=y
 # CONFIG_IPIC is not set
@@ -221,7 +227,7 @@ CONFIG_HZ_250=y
 # CONFIG_HZ_300 is not set
 # CONFIG_HZ_1000 is not set
 CONFIG_HZ=250
-# CONFIG_SCHED_HRTICK is not set
+CONFIG_SCHED_HRTICK=y
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
@@ -244,6 +250,7 @@ CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_MIGRATION is not set
 # CONFIG_RESOURCES_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
@@ -251,6 +258,7 @@ CONFIG_VIRT_TO_BUS=y
 CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
+CONFIG_EXTRA_TARGETS=""
 CONFIG_ARCH_WANTS_FREEZER_CONTROL=y
 CONFIG_PM=y
 CONFIG_PM_DEBUG=y
@@ -314,10 +322,6 @@ CONFIG_PAGE_OFFSET=0xc0000000
 CONFIG_KERNEL_START=0xc0000000
 CONFIG_PHYSICAL_START=0x00000000
 CONFIG_TASK_SIZE=0xc0000000
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -501,7 +505,6 @@ CONFIG_IP_DCCP_TFRC_LIB=m
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_NET_SCHED is not set
 CONFIG_NET_CLS_ROUTE=y
-CONFIG_NET_SCH_FIFO=y
 
 #
 # Network testing
@@ -571,6 +574,7 @@ CONFIG_BT_HIDP=m
 #
 CONFIG_BT_HCIUSB=m
 # CONFIG_BT_HCIUSB_SCO is not set
+# CONFIG_BT_HCIBTUSB is not set
 # CONFIG_BT_HCIUART is not set
 CONFIG_BT_HCIBCM203X=m
 # CONFIG_BT_HCIBPA10X is not set
@@ -588,27 +592,18 @@ CONFIG_BT_HCIBFUSB=m
 CONFIG_CFG80211=m
 CONFIG_NL80211=y
 CONFIG_WIRELESS_EXT=y
+CONFIG_WIRELESS_EXT_SYSFS=y
 CONFIG_MAC80211=m
 
 #
 # Rate control algorithm selection
 #
+CONFIG_MAC80211_RC_PID=y
 CONFIG_MAC80211_RC_DEFAULT_PID=y
-# CONFIG_MAC80211_RC_DEFAULT_NONE is not set
-
-#
-# Selecting 'y' for an algorithm will
-#
-
-#
-# build the algorithm into mac80211.
-#
 CONFIG_MAC80211_RC_DEFAULT="pid"
-CONFIG_MAC80211_RC_PID=y
 # CONFIG_MAC80211_MESH is not set
 CONFIG_MAC80211_LEDS=y
-# CONFIG_MAC80211_DEBUG_PACKET_ALIGNMENT is not set
-# CONFIG_MAC80211_DEBUG is not set
+# CONFIG_MAC80211_DEBUG_MENU is not set
 CONFIG_IEEE80211=m
 # CONFIG_IEEE80211_DEBUG is not set
 CONFIG_IEEE80211_CRYPT_WEP=m
@@ -628,6 +623,8 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 # CONFIG_STANDALONE is not set
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_DEBUG_DRIVER is not set
 # CONFIG_DEBUG_DEVRES is not set
 # CONFIG_SYS_HYPERVISOR is not set
@@ -656,12 +653,14 @@ CONFIG_BLK_DEV_RAM_SIZE=4096
 # CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_PHANTOM is not set
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_HP_ILO is not set
 CONFIG_HAVE_IDE=y
 CONFIG_IDE=y
 CONFIG_BLK_DEV_IDE=y
@@ -669,6 +668,8 @@ CONFIG_BLK_DEV_IDE=y
 #
 # Please see Documentation/ide/ide.txt for help/info on IDE drives
 #
+CONFIG_IDE_TIMINGS=y
+CONFIG_IDE_ATAPI=y
 # CONFIG_BLK_DEV_IDE_SATA is not set
 CONFIG_BLK_DEV_IDEDISK=y
 # CONFIG_IDEDISK_MULTI_MODE is not set
@@ -685,7 +686,6 @@ CONFIG_IDE_PROC_FS=y
 #
 # IDE chipset support/bugfixes
 #
-# CONFIG_IDE_GENERIC is not set
 # CONFIG_BLK_DEV_PLATFORM is not set
 CONFIG_BLK_DEV_IDEDMA_SFF=y
 
@@ -703,10 +703,8 @@ CONFIG_BLK_DEV_IDEDMA_PCI=y
 # CONFIG_BLK_DEV_AMD74XX is not set
 # CONFIG_BLK_DEV_CMD64X is not set
 # CONFIG_BLK_DEV_TRIFLEX is not set
-# CONFIG_BLK_DEV_CY82C693 is not set
 # CONFIG_BLK_DEV_CS5520 is not set
 # CONFIG_BLK_DEV_CS5530 is not set
-# CONFIG_BLK_DEV_HPT34X is not set
 # CONFIG_BLK_DEV_HPT366 is not set
 # CONFIG_BLK_DEV_JMICRON is not set
 # CONFIG_BLK_DEV_SC1200 is not set
@@ -727,8 +725,6 @@ CONFIG_BLK_DEV_IDE_PMAC=y
 CONFIG_BLK_DEV_IDE_PMAC_ATA100FIRST=y
 CONFIG_BLK_DEV_IDEDMA_PMAC=y
 CONFIG_BLK_DEV_IDEDMA=y
-# CONFIG_BLK_DEV_HD_ONLY is not set
-# CONFIG_BLK_DEV_HD is not set
 
 #
 # SCSI device support
@@ -820,6 +816,7 @@ CONFIG_SCSI_MESH_RESET_DELAY_MS=4000
 CONFIG_SCSI_MAC53C94=y
 # CONFIG_SCSI_SRP is not set
 # CONFIG_SCSI_LOWLEVEL_PCMCIA is not set
+# CONFIG_SCSI_DH is not set
 # CONFIG_ATA is not set
 CONFIG_MD=y
 CONFIG_BLK_DEV_MD=m
@@ -844,30 +841,22 @@ CONFIG_DM_ZERO=m
 #
 # IEEE 1394 (FireWire) support
 #
-# CONFIG_FIREWIRE is not set
-CONFIG_IEEE1394=m
-
-#
-# Subsystem Options
-#
-# CONFIG_IEEE1394_VERBOSEDEBUG is not set
 
 #
-# Controllers
+# Enable only one of the two stacks, unless you know what you are doing
 #
-# CONFIG_IEEE1394_PCILYNX is not set
+# CONFIG_FIREWIRE is not set
+CONFIG_IEEE1394=m
 CONFIG_IEEE1394_OHCI1394=m
-
-#
-# Protocols
-#
-CONFIG_IEEE1394_VIDEO1394=m
+# CONFIG_IEEE1394_PCILYNX is not set
 CONFIG_IEEE1394_SBP2=m
 # CONFIG_IEEE1394_SBP2_PHYS_DMA is not set
 # CONFIG_IEEE1394_ETH1394_ROM_ENTRY is not set
 # CONFIG_IEEE1394_ETH1394 is not set
-CONFIG_IEEE1394_DV1394=m
 CONFIG_IEEE1394_RAWIO=m
+CONFIG_IEEE1394_VIDEO1394=m
+CONFIG_IEEE1394_DV1394=m
+# CONFIG_IEEE1394_VERBOSEDEBUG is not set
 # CONFIG_I2O is not set
 CONFIG_MACINTOSH_DRIVERS=y
 CONFIG_ADB=y
@@ -887,7 +876,6 @@ CONFIG_THERM_ADT746X=m
 # CONFIG_ANSLCD is not set
 CONFIG_PMAC_RACKMETER=m
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 CONFIG_DUMMY=m
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -936,7 +924,6 @@ CONFIG_NETDEV_1000=y
 # CONFIG_DL2K is not set
 # CONFIG_E1000 is not set
 # CONFIG_E1000E is not set
-# CONFIG_E1000E_ENABLED is not set
 # CONFIG_IP1000 is not set
 # CONFIG_IGB is not set
 # CONFIG_NS83820 is not set
@@ -952,6 +939,7 @@ CONFIG_NETDEV_1000=y
 # CONFIG_MV643XX_ETH is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
+# CONFIG_ATL1E is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
 # CONFIG_CHELSIO_T3 is not set
@@ -994,13 +982,15 @@ CONFIG_PRISM54=m
 # CONFIG_RTL8180 is not set
 # CONFIG_RTL8187 is not set
 # CONFIG_ADM8211 is not set
+# CONFIG_MAC80211_HWSIM is not set
 CONFIG_P54_COMMON=m
 # CONFIG_P54_USB is not set
 # CONFIG_P54_PCI is not set
 # CONFIG_ATH5K is not set
+# CONFIG_ATH9K is not set
 # CONFIG_IWLCORE is not set
 # CONFIG_IWLWIFI_LEDS is not set
-# CONFIG_IWL4965 is not set
+# CONFIG_IWLAGN is not set
 # CONFIG_IWL3945 is not set
 # CONFIG_HOSTAP is not set
 CONFIG_B43=m
@@ -1095,6 +1085,7 @@ CONFIG_INPUT_MOUSE=y
 # CONFIG_MOUSE_PS2 is not set
 # CONFIG_MOUSE_SERIAL is not set
 # CONFIG_MOUSE_APPLETOUCH is not set
+# CONFIG_MOUSE_BCM5974 is not set
 # CONFIG_MOUSE_VSXXXAA is not set
 # CONFIG_INPUT_JOYSTICK is not set
 # CONFIG_INPUT_TABLET is not set
@@ -1109,12 +1100,14 @@ CONFIG_SERIO=y
 # CONFIG_SERIO_SERPORT is not set
 # CONFIG_SERIO_PCIPS2 is not set
 # CONFIG_SERIO_RAW is not set
+# CONFIG_SERIO_XILINX_XPS_PS2 is not set
 # CONFIG_GAMEPORT is not set
 
 #
 # Character devices
 #
 CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
 # CONFIG_VT_HW_CONSOLE_BINDING is not set
@@ -1165,45 +1158,70 @@ CONFIG_DEVPORT=y
 CONFIG_I2C=y
 CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=m
+CONFIG_I2C_HELPER_AUTO=y
 CONFIG_I2C_ALGOBIT=y
 
 #
 # I2C Hardware Bus support
 #
+
+#
+# PC SMBus host controller drivers
+#
 # CONFIG_I2C_ALI1535 is not set
 # CONFIG_I2C_ALI1563 is not set
 # CONFIG_I2C_ALI15X3 is not set
 # CONFIG_I2C_AMD756 is not set
 # CONFIG_I2C_AMD8111 is not set
 # CONFIG_I2C_I801 is not set
-# CONFIG_I2C_I810 is not set
+# CONFIG_I2C_ISCH is not set
 # CONFIG_I2C_PIIX4 is not set
-CONFIG_I2C_POWERMAC=y
-# CONFIG_I2C_MPC is not set
 # CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_PROSAVAGE is not set
-# CONFIG_I2C_SAVAGE4 is not set
-# CONFIG_I2C_SIMTEC is not set
 # CONFIG_I2C_SIS5595 is not set
 # CONFIG_I2C_SIS630 is not set
 # CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_TINY_USB is not set
 # CONFIG_I2C_VIA is not set
 # CONFIG_I2C_VIAPRO is not set
+
+#
+# Mac SMBus host controller drivers
+#
+CONFIG_I2C_POWERMAC=y
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+# CONFIG_I2C_MPC is not set
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Graphics adapter I2C/DDC channel drivers
+#
 # CONFIG_I2C_VOODOO3 is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
 # CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
 
 #
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
+# CONFIG_AT24 is not set
 # CONFIG_SENSORS_EEPROM is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
@@ -1212,6 +1230,8 @@ CONFIG_I2C_POWERMAC=y
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
 # CONFIG_SPI is not set
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+# CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
 CONFIG_POWER_SUPPLY=y
 # CONFIG_POWER_SUPPLY_DEBUG is not set
@@ -1221,6 +1241,7 @@ CONFIG_APM_POWER=y
 CONFIG_BATTERY_PMU=y
 # CONFIG_HWMON is not set
 # CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
 
 #
@@ -1241,8 +1262,10 @@ CONFIG_SSB_DRIVER_PCICORE=y
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
 
 #
 # Multimedia devices
@@ -1343,10 +1366,13 @@ CONFIG_FB_3DFX=y
 # CONFIG_FB_TRIDENT is not set
 # CONFIG_FB_ARK is not set
 # CONFIG_FB_PM3 is not set
+# CONFIG_FB_CARMINE is not set
 # CONFIG_FB_IBM_GXT4500 is not set
 # CONFIG_FB_VIRTUAL is not set
 CONFIG_BACKLIGHT_LCD_SUPPORT=y
 CONFIG_LCD_CLASS_DEVICE=m
+# CONFIG_LCD_ILI9320 is not set
+# CONFIG_LCD_PLATFORM is not set
 CONFIG_BACKLIGHT_CLASS_DEVICE=y
 # CONFIG_BACKLIGHT_CORGI is not set
 
@@ -1374,15 +1400,7 @@ CONFIG_LOGO=y
 CONFIG_LOGO_LINUX_MONO=y
 CONFIG_LOGO_LINUX_VGA16=y
 CONFIG_LOGO_LINUX_CLUT224=y
-
-#
-# Sound
-#
 CONFIG_SOUND=m
-
-#
-# Advanced Linux Sound Architecture
-#
 CONFIG_SND=m
 CONFIG_SND_TIMER=m
 CONFIG_SND_PCM=m
@@ -1400,19 +1418,13 @@ CONFIG_SND_SUPPORT_OLD_API=y
 CONFIG_SND_VERBOSE_PROCFS=y
 # CONFIG_SND_VERBOSE_PRINTK is not set
 # CONFIG_SND_DEBUG is not set
-
-#
-# Generic devices
-#
+CONFIG_SND_DRIVERS=y
 CONFIG_SND_DUMMY=m
 # CONFIG_SND_VIRMIDI is not set
 # CONFIG_SND_MTPAV is not set
 # CONFIG_SND_SERIAL_U16550 is not set
 # CONFIG_SND_MPU401 is not set
-
-#
-# PCI devices
-#
+CONFIG_SND_PCI=y
 # CONFIG_SND_AD1889 is not set
 # CONFIG_SND_ALS300 is not set
 # CONFIG_SND_ALS4000 is not set
@@ -1474,20 +1486,9 @@ CONFIG_SND_DUMMY=m
 # CONFIG_SND_VIRTUOSO is not set
 # CONFIG_SND_VX222 is not set
 # CONFIG_SND_YMFPCI is not set
-
-#
-# ALSA PowerMac devices
-#
+CONFIG_SND_PPC=y
 CONFIG_SND_POWERMAC=m
 CONFIG_SND_POWERMAC_AUTO_DRC=y
-
-#
-# ALSA PowerPC devices
-#
-
-#
-# Apple Onboard Audio driver
-#
 CONFIG_SND_AOA=m
 CONFIG_SND_AOA_FABRIC_LAYOUT=m
 CONFIG_SND_AOA_ONYX=m
@@ -1495,36 +1496,14 @@ CONFIG_SND_AOA_TAS=m
 CONFIG_SND_AOA_TOONIE=m
 CONFIG_SND_AOA_SOUNDBUS=m
 CONFIG_SND_AOA_SOUNDBUS_I2S=m
-
-#
-# USB devices
-#
+CONFIG_SND_USB=y
 CONFIG_SND_USB_AUDIO=m
 # CONFIG_SND_USB_USX2Y is not set
 # CONFIG_SND_USB_CAIAQ is not set
-
-#
-# PCMCIA devices
-#
+CONFIG_SND_PCMCIA=y
 # CONFIG_SND_VXPOCKET is not set
 # CONFIG_SND_PDAUDIOCF is not set
-
-#
-# System on Chip audio support
-#
 # CONFIG_SND_SOC is not set
-
-#
-# ALSA SoC audio for Freescale SOCs
-#
-
-#
-# SoC Audio for the Texas Instruments OMAP
-#
-
-#
-# Open Sound System
-#
 # CONFIG_SOUND_PRIME is not set
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
@@ -1554,6 +1533,7 @@ CONFIG_USB_DEVICE_CLASS=y
 CONFIG_USB_DYNAMIC_MINORS=y
 # CONFIG_USB_SUSPEND is not set
 # CONFIG_USB_OTG is not set
+CONFIG_USB_MON=y
 
 #
 # USB Host Controller Drivers
@@ -1579,6 +1559,7 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y
 #
 CONFIG_USB_ACM=m
 CONFIG_USB_PRINTER=m
+# CONFIG_USB_WDM is not set
 
 #
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
@@ -1600,6 +1581,7 @@ CONFIG_USB_STORAGE=m
 # CONFIG_USB_STORAGE_ALAUDA is not set
 CONFIG_USB_STORAGE_ONETOUCH=y
 # CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_SIERRA is not set
 # CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
 # CONFIG_USB_LIBUSUAL is not set
 
@@ -1608,7 +1590,6 @@ CONFIG_USB_STORAGE_ONETOUCH=y
 #
 # CONFIG_USB_MDC800 is not set
 # CONFIG_USB_MICROTEK is not set
-CONFIG_USB_MON=y
 
 #
 # USB port drivers
@@ -1617,7 +1598,6 @@ CONFIG_USB_SERIAL=m
 CONFIG_USB_EZUSB=y
 # CONFIG_USB_SERIAL_GENERIC is not set
 # CONFIG_USB_SERIAL_AIRCABLE is not set
-# CONFIG_USB_SERIAL_AIRPRIME is not set
 # CONFIG_USB_SERIAL_ARK3116 is not set
 # CONFIG_USB_SERIAL_BELKIN is not set
 # CONFIG_USB_SERIAL_CH341 is not set
@@ -1676,7 +1656,6 @@ CONFIG_USB_SERIAL_KEYSPAN_USA49WLC=y
 # CONFIG_USB_EMI62 is not set
 # CONFIG_USB_EMI26 is not set
 # CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_AUERSWALD is not set
 # CONFIG_USB_RIO500 is not set
 # CONFIG_USB_LEGOTOWER is not set
 # CONFIG_USB_LCD is not set
@@ -1693,6 +1672,7 @@ CONFIG_USB_APPLEDISPLAY=m
 # CONFIG_USB_TRANCEVIBRATOR is not set
 # CONFIG_USB_IOWARRIOR is not set
 # CONFIG_USB_TEST is not set
+# CONFIG_USB_ISIGHTFW is not set
 # CONFIG_USB_GADGET is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
@@ -1702,6 +1682,8 @@ CONFIG_LEDS_CLASS=y
 #
 # LED drivers
 #
+# CONFIG_LEDS_PCA9532 is not set
+# CONFIG_LEDS_PCA955X is not set
 
 #
 # LED Triggers
@@ -1789,6 +1771,7 @@ CONFIG_HFSPLUS_FS=m
 # CONFIG_CRAMFS is not set
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
 # CONFIG_ROMFS_FS is not set
@@ -1811,7 +1794,6 @@ CONFIG_NFS_ACL_SUPPORT=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_BIND34 is not set
 CONFIG_RPCSEC_GSS_KRB5=y
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 CONFIG_SMB_FS=m
@@ -1891,6 +1873,7 @@ CONFIG_BITREVERSE=y
 # CONFIG_GENERIC_FIND_FIRST_BIT is not set
 CONFIG_CRC_CCITT=y
 CONFIG_CRC16=y
+CONFIG_CRC_T10DIF=y
 CONFIG_CRC_ITU_T=m
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
@@ -1921,8 +1904,10 @@ CONFIG_MAGIC_SYSRQ=y
 CONFIG_DEBUG_KERNEL=y
 # CONFIG_DEBUG_SHIRQ is not set
 CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
 CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
+CONFIG_SCHEDSTATS=y
 # CONFIG_TIMER_STATS is not set
 # CONFIG_DEBUG_OBJECTS is not set
 # CONFIG_SLUB_DEBUG_ON is not set
@@ -1933,24 +1918,38 @@ CONFIG_SCHED_DEBUG=y
 # CONFIG_DEBUG_MUTEXES is not set
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
 # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+CONFIG_STACKTRACE=y
 # CONFIG_DEBUG_KOBJECT is not set
 CONFIG_DEBUG_BUGVERBOSE=y
 # CONFIG_DEBUG_INFO is not set
 # CONFIG_DEBUG_VM is not set
 # CONFIG_DEBUG_WRITECOUNT is not set
+CONFIG_DEBUG_MEMORY_INIT=y
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
+CONFIG_FRAME_POINTER=y
 # CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_FAULT_INJECTION is not set
+CONFIG_LATENCYTOP=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+# CONFIG_FTRACE is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
 # CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
-CONFIG_DEBUGGER=y
+# CONFIG_CODE_PATCHING_SELFTEST is not set
+# CONFIG_FTR_FIXUP_SELFTEST is not set
 CONFIG_XMON=y
 CONFIG_XMON_DEFAULT=y
 CONFIG_XMON_DISASSEMBLY=y
+CONFIG_DEBUGGER=y
 CONFIG_IRQSTACKS=y
 # CONFIG_BDI_SWITCH is not set
 CONFIG_BOOTX_TEXT=y
@@ -2009,6 +2008,10 @@ CONFIG_CRYPTO_CRC32C=m
 CONFIG_CRYPTO_MD4=m
 CONFIG_CRYPTO_MD5=y
 CONFIG_CRYPTO_MICHAEL_MIC=m
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
 CONFIG_CRYPTO_SHA1=y
 CONFIG_CRYPTO_SHA256=m
 CONFIG_CRYPTO_SHA512=m
diff --git a/arch/powerpc/configs/ppc40x_defconfig b/arch/powerpc/configs/ppc40x_defconfig
index 9d0140e3838e..6a5b713a07e0 100644
--- a/arch/powerpc/configs/ppc40x_defconfig
+++ b/arch/powerpc/configs/ppc40x_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.25-rc9
-# Tue Apr 15 08:46:44 2008
+# Linux kernel version: 2.6.27-rc1
+# Tue Aug  5 12:34:33 2008
 #
 # CONFIG_PPC64 is not set
 
@@ -26,8 +26,12 @@ CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_TIME_VSYSCALL=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
+# CONFIG_HAVE_GET_USER_PAGES_FAST is not set
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
 CONFIG_GENERIC_HWEIGHT=y
@@ -84,6 +88,7 @@ CONFIG_INITRAMFS_SOURCE=""
 CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
 CONFIG_KALLSYMS_EXTRA_PASS=y
@@ -109,14 +114,22 @@ CONFIG_SLUB=y
 # CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
+CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
+# CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+# CONFIG_HAVE_CLK is not set
 CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
@@ -127,6 +140,7 @@ CONFIG_LBD=y
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -146,11 +160,10 @@ CONFIG_PPC4xx_PCI_EXPRESS=y
 #
 # Platform support
 #
-# CONFIG_PPC_MPC512x is not set
-# CONFIG_PPC_MPC5121 is not set
 # CONFIG_PPC_CELL is not set
 # CONFIG_PPC_CELL_NATIVE is not set
 # CONFIG_PQ2ADS is not set
+CONFIG_XILINX_VIRTEX=y
 CONFIG_EP405=y
 CONFIG_KILAUEA=y
 CONFIG_MAKALU=y
@@ -158,7 +171,6 @@ CONFIG_WALNUT=y
 CONFIG_XILINX_VIRTEX_GENERIC_BOARD=y
 CONFIG_405GP=y
 CONFIG_405EX=y
-CONFIG_XILINX_VIRTEX=y
 CONFIG_XILINX_VIRTEX_II_PRO=y
 CONFIG_XILINX_VIRTEX_4_FX=y
 CONFIG_IBM405_ERR77=y
@@ -211,7 +223,9 @@ CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
 # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_MIGRATION=y
 CONFIG_RESOURCES_64BIT=y
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
@@ -219,6 +233,7 @@ CONFIG_VIRT_TO_BUS=y
 CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
+CONFIG_EXTRA_TARGETS=""
 # CONFIG_PM is not set
 CONFIG_SECCOMP=y
 CONFIG_ISA_DMA_API=y
@@ -229,6 +244,7 @@ CONFIG_ISA_DMA_API=y
 CONFIG_ZONE_DMA=y
 CONFIG_PPC_INDIRECT_PCI=y
 CONFIG_4xx_SOC=y
+CONFIG_PPC_PCI_CHOICE=y
 CONFIG_PCI=y
 CONFIG_PCI_DOMAINS=y
 CONFIG_PCI_SYSCALL=y
@@ -239,6 +255,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y
 # CONFIG_PCI_DEBUG is not set
 # CONFIG_PCCARD is not set
 # CONFIG_HOTPLUG_PCI is not set
+# CONFIG_HAS_RAPIDIO is not set
 
 #
 # Advanced setup
@@ -248,17 +265,13 @@ CONFIG_ARCH_SUPPORTS_MSI=y
 #
 # Default settings for advanced configuration options are used
 #
-CONFIG_HIGHMEM_START=0xfe000000
 CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_PAGE_OFFSET=0xc0000000
 CONFIG_KERNEL_START=0xc0000000
+CONFIG_PHYSICAL_START=0x00000000
 CONFIG_TASK_SIZE=0xc0000000
 CONFIG_CONSISTENT_START=0xff100000
 CONFIG_CONSISTENT_SIZE=0x00200000
-CONFIG_BOOT_LOAD=0x00400000
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -267,6 +280,11 @@ CONFIG_NET=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
 # CONFIG_NET_KEY is not set
 CONFIG_INET=y
 # CONFIG_IP_MULTICAST is not set
@@ -284,7 +302,7 @@ CONFIG_IP_PNP_BOOTP=y
 # CONFIG_INET_ESP is not set
 # CONFIG_INET_IPCOMP is not set
 # CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_TUNNEL=m
 # CONFIG_INET_XFRM_MODE_TRANSPORT is not set
 # CONFIG_INET_XFRM_MODE_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_BEET is not set
@@ -295,9 +313,25 @@ CONFIG_INET_TCP_DIAG=y
 CONFIG_TCP_CONG_CUBIC=y
 CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_TCP_MD5SIG is not set
-# CONFIG_IPV6 is not set
+CONFIG_IPV6=m
+# CONFIG_IPV6_PRIVACY is not set
+# CONFIG_IPV6_ROUTER_PREF is not set
+# CONFIG_IPV6_OPTIMISTIC_DAD is not set
+# CONFIG_INET6_AH is not set
+# CONFIG_INET6_ESP is not set
+# CONFIG_INET6_IPCOMP is not set
+# CONFIG_IPV6_MIP6 is not set
 # CONFIG_INET6_XFRM_TUNNEL is not set
 # CONFIG_INET6_TUNNEL is not set
+CONFIG_INET6_XFRM_MODE_TRANSPORT=m
+CONFIG_INET6_XFRM_MODE_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_BEET=m
+# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
+CONFIG_IPV6_SIT=m
+CONFIG_IPV6_NDISC_NODETYPE=y
+# CONFIG_IPV6_TUNNEL is not set
+# CONFIG_IPV6_MULTIPLE_TABLES is not set
+# CONFIG_IPV6_MROUTE is not set
 # CONFIG_NETWORK_SECMARK is not set
 # CONFIG_NETFILTER is not set
 # CONFIG_IP_DCCP is not set
@@ -347,6 +381,8 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_DEBUG_DRIVER is not set
 # CONFIG_DEBUG_DEVRES is not set
 # CONFIG_SYS_HYPERVISOR is not set
@@ -359,6 +395,7 @@ CONFIG_MTD_PARTITIONS=y
 # CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
 CONFIG_MTD_OF_PARTS=y
+# CONFIG_MTD_AR7_PARTS is not set
 
 #
 # User Modules And Translation Layers
@@ -429,8 +466,17 @@ CONFIG_MTD_PHYSMAP_OF=y
 #
 # UBI - Unsorted block images
 #
-# CONFIG_MTD_UBI is not set
+CONFIG_MTD_UBI=m
+CONFIG_MTD_UBI_WL_THRESHOLD=4096
+CONFIG_MTD_UBI_BEB_RESERVE=1
+CONFIG_MTD_UBI_GLUEBI=y
+
+#
+# UBI debugging options
+#
+# CONFIG_MTD_UBI_DEBUG is not set
 CONFIG_OF_DEVICE=y
+CONFIG_OF_I2C=m
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_FD is not set
@@ -449,12 +495,14 @@ CONFIG_BLK_DEV_RAM_SIZE=35000
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
 # CONFIG_XILINX_SYSACE is not set
+# CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_PHANTOM is not set
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_HP_ILO is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -472,12 +520,15 @@ CONFIG_HAVE_IDE=y
 #
 # IEEE 1394 (FireWire) support
 #
+
+#
+# Enable only one of the two stacks, unless you know what you are doing
+#
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -512,7 +563,6 @@ CONFIG_NETDEV_1000=y
 # CONFIG_DL2K is not set
 # CONFIG_E1000 is not set
 # CONFIG_E1000E is not set
-# CONFIG_E1000E_ENABLED is not set
 # CONFIG_IP1000 is not set
 # CONFIG_IGB is not set
 # CONFIG_NS83820 is not set
@@ -522,12 +572,12 @@ CONFIG_NETDEV_1000=y
 # CONFIG_SIS190 is not set
 # CONFIG_SKGE is not set
 # CONFIG_SKY2 is not set
-# CONFIG_SK98LIN is not set
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
+# CONFIG_ATL1E is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
 # CONFIG_CHELSIO_T3 is not set
@@ -540,6 +590,7 @@ CONFIG_NETDEV_10000=y
 # CONFIG_MLX4_CORE is not set
 # CONFIG_TEHUTI is not set
 # CONFIG_BNX2X is not set
+# CONFIG_SFC is not set
 # CONFIG_TR is not set
 
 #
@@ -547,6 +598,7 @@ CONFIG_NETDEV_10000=y
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
 # CONFIG_WAN is not set
 # CONFIG_FDDI is not set
 # CONFIG_HIPPI is not set
@@ -573,6 +625,7 @@ CONFIG_NETDEV_10000=y
 # Character devices
 #
 # CONFIG_VT is not set
+CONFIG_DEVKMEM=y
 # CONFIG_SERIAL_NONSTANDARD is not set
 # CONFIG_NOZOMI is not set
 
@@ -611,13 +664,76 @@ CONFIG_XILINX_HWICAP=m
 # CONFIG_RAW_DRIVER is not set
 # CONFIG_TCG_TPM is not set
 CONFIG_DEVPORT=y
-# CONFIG_I2C is not set
+CONFIG_I2C=m
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_CHARDEV=m
 
 #
-# SPI support
+# I2C Hardware Bus support
+#
+
+#
+# PC SMBus host controller drivers
+#
+# CONFIG_I2C_ALI1535 is not set
+# CONFIG_I2C_ALI1563 is not set
+# CONFIG_I2C_ALI15X3 is not set
+# CONFIG_I2C_AMD756 is not set
+# CONFIG_I2C_AMD8111 is not set
+# CONFIG_I2C_I801 is not set
+# CONFIG_I2C_ISCH is not set
+# CONFIG_I2C_PIIX4 is not set
+# CONFIG_I2C_NFORCE2 is not set
+# CONFIG_I2C_SIS5595 is not set
+# CONFIG_I2C_SIS630 is not set
+# CONFIG_I2C_SIS96X is not set
+# CONFIG_I2C_VIA is not set
+# CONFIG_I2C_VIAPRO is not set
+
 #
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+CONFIG_I2C_IBM_IIC=m
+# CONFIG_I2C_MPC is not set
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+
+#
+# Graphics adapter I2C/DDC channel drivers
+#
+# CONFIG_I2C_VOODOO3 is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_DS1682 is not set
+# CONFIG_AT24 is not set
+# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
 # CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+# CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
@@ -633,13 +749,24 @@ CONFIG_SSB_POSSIBLE=y
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
 
 #
 # Multimedia devices
 #
+
+#
+# Multimedia core support
+#
 # CONFIG_VIDEO_DEV is not set
 # CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
 # CONFIG_DAB is not set
 
 #
@@ -656,16 +783,14 @@ CONFIG_VIDEO_OUTPUT_CONTROL=m
 # Display device support
 #
 # CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Sound
-#
 # CONFIG_SOUND is not set
 CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
 CONFIG_USB_ARCH_HAS_EHCI=y
 # CONFIG_USB is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
 
 #
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
@@ -674,14 +799,11 @@ CONFIG_USB_ARCH_HAS_EHCI=y
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
 # CONFIG_INFINIBAND is not set
 # CONFIG_EDAC is not set
 # CONFIG_RTC_CLASS is not set
 # CONFIG_DMADEVICES is not set
-
-#
-# Userspace I/O
-#
 # CONFIG_UIO is not set
 
 #
@@ -690,13 +812,18 @@ CONFIG_USB_ARCH_HAS_EHCI=y
 CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XATTR is not set
 # CONFIG_EXT2_FS_XIP is not set
-# CONFIG_EXT3_FS is not set
+CONFIG_EXT3_FS=m
+CONFIG_EXT3_FS_XATTR=y
+# CONFIG_EXT3_FS_POSIX_ACL is not set
+# CONFIG_EXT3_FS_SECURITY is not set
 # CONFIG_EXT4DEV_FS is not set
+CONFIG_JBD=m
+# CONFIG_JBD_DEBUG is not set
+CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
 # CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
@@ -715,8 +842,11 @@ CONFIG_INOTIFY_USER=y
 #
 # DOS/FAT/NT Filesystems
 #
+CONFIG_FAT_FS=m
 # CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
+CONFIG_VFAT_FS=m
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
 # CONFIG_NTFS_FS is not set
 
 #
@@ -741,10 +871,27 @@ CONFIG_TMPFS=y
 # CONFIG_BEFS_FS is not set
 # CONFIG_BFS_FS is not set
 # CONFIG_EFS_FS is not set
-# CONFIG_JFFS2_FS is not set
+CONFIG_JFFS2_FS=m
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_XATTR is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+CONFIG_UBIFS_FS=m
+# CONFIG_UBIFS_FS_XATTR is not set
+# CONFIG_UBIFS_FS_ADVANCED_COMPR is not set
+CONFIG_UBIFS_FS_LZO=y
+CONFIG_UBIFS_FS_ZLIB=y
+# CONFIG_UBIFS_FS_DEBUG is not set
 CONFIG_CRAMFS=y
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
 # CONFIG_ROMFS_FS is not set
@@ -755,14 +902,12 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 # CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -776,20 +921,64 @@ CONFIG_SUNRPC=y
 #
 # CONFIG_PARTITION_ADVANCED is not set
 CONFIG_MSDOS_PARTITION=y
-# CONFIG_NLS is not set
+CONFIG_NLS=m
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=m
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+CONFIG_NLS_ISO8859_1=m
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
 # CONFIG_DLM is not set
 
 #
 # Library routines
 #
 CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
 # CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
+CONFIG_CRC16=m
+# CONFIG_CRC_T10DIF is not set
 # CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
 # CONFIG_LIBCRC32C is not set
 CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=m
+CONFIG_LZO_COMPRESS=m
+CONFIG_LZO_DECOMPRESS=m
 CONFIG_PLIST=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
@@ -802,6 +991,7 @@ CONFIG_HAVE_LMB=y
 # CONFIG_PRINTK_TIME is not set
 CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
 # CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_FS=y
@@ -809,9 +999,12 @@ CONFIG_DEBUG_FS=y
 CONFIG_DEBUG_KERNEL=y
 # CONFIG_DEBUG_SHIRQ is not set
 CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
 CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
 # CONFIG_SLUB_DEBUG_ON is not set
 # CONFIG_SLUB_STATS is not set
 # CONFIG_DEBUG_RT_MUTEXES is not set
@@ -824,17 +1017,30 @@ CONFIG_SCHED_DEBUG=y
 CONFIG_DEBUG_BUGVERBOSE=y
 # CONFIG_DEBUG_INFO is not set
 # CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+# CONFIG_FTRACE is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
 # CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
 # CONFIG_DEBUG_PAGEALLOC is not set
-# CONFIG_DEBUGGER is not set
+# CONFIG_CODE_PATCHING_SELFTEST is not set
+# CONFIG_FTR_FIXUP_SELFTEST is not set
+# CONFIG_XMON is not set
+# CONFIG_IRQSTACKS is not set
 # CONFIG_VIRQ_DEBUG is not set
 # CONFIG_BDI_SWITCH is not set
 # CONFIG_PPC_EARLY_DEBUG is not set
@@ -846,51 +1052,85 @@ CONFIG_DEBUG_BUGVERBOSE=y
 # CONFIG_SECURITY is not set
 # CONFIG_SECURITY_FILE_CAPABILITIES is not set
 CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
 CONFIG_CRYPTO_ALGAPI=y
 CONFIG_CRYPTO_BLKCIPHER=y
-# CONFIG_CRYPTO_SEQIV is not set
 CONFIG_CRYPTO_MANAGER=y
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=y
+# CONFIG_CRYPTO_LRW is not set
+CONFIG_CRYPTO_PCBC=y
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
 # CONFIG_CRYPTO_HMAC is not set
 # CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_NULL is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
 # CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
 # CONFIG_CRYPTO_SHA1 is not set
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
 # CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-CONFIG_CRYPTO_ECB=y
-CONFIG_CRYPTO_CBC=y
-CONFIG_CRYPTO_PCBC=y
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_XTS is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
 # CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
 # CONFIG_CRYPTO_CAST5 is not set
 # CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
 # CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_SEED is not set
 # CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_TEST is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_LZO is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+CONFIG_CRYPTO_DEFLATE=m
+CONFIG_CRYPTO_LZO=m
 CONFIG_CRYPTO_HW=y
 # CONFIG_CRYPTO_DEV_HIFN_795X is not set
 # CONFIG_PPC_CLOCK is not set
+# CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/ppc44x_defconfig b/arch/powerpc/configs/ppc44x_defconfig
index f9d279bb700b..c7825dcbf415 100644
--- a/arch/powerpc/configs/ppc44x_defconfig
+++ b/arch/powerpc/configs/ppc44x_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc8
-# Wed Jul  9 13:50:48 2008
+# Linux kernel version: 2.6.27-rc1
+# Tue Aug  5 10:01:31 2008
 #
 # CONFIG_PPC64 is not set
 
@@ -30,9 +30,11 @@ CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_TIME_VSYSCALL=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
+# CONFIG_HAVE_GET_USER_PAGES_FAST is not set
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
@@ -116,10 +118,16 @@ CONFIG_SLUB=y
 # CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
+CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
 # CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+# CONFIG_HAVE_CLK is not set
 CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
@@ -136,6 +144,7 @@ CONFIG_LBD=y
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -155,8 +164,6 @@ CONFIG_PPC4xx_PCI_EXPRESS=y
 #
 # Platform support
 #
-# CONFIG_PPC_MPC512x is not set
-# CONFIG_PPC_MPC5121 is not set
 # CONFIG_PPC_CELL is not set
 # CONFIG_PPC_CELL_NATIVE is not set
 # CONFIG_PQ2ADS is not set
@@ -231,6 +238,7 @@ CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_MIGRATION=y
 CONFIG_RESOURCES_64BIT=y
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
@@ -248,6 +256,7 @@ CONFIG_ISA_DMA_API=y
 CONFIG_ZONE_DMA=y
 CONFIG_PPC_INDIRECT_PCI=y
 CONFIG_4xx_SOC=y
+CONFIG_PPC_PCI_CHOICE=y
 CONFIG_PCI=y
 CONFIG_PCI_DOMAINS=y
 CONFIG_PCI_SYSCALL=y
@@ -275,10 +284,6 @@ CONFIG_PHYSICAL_START=0x00000000
 CONFIG_TASK_SIZE=0xc0000000
 CONFIG_CONSISTENT_START=0xff100000
 CONFIG_CONSISTENT_SIZE=0x00200000
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -287,6 +292,11 @@ CONFIG_NET=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
 # CONFIG_NET_KEY is not set
 CONFIG_INET=y
 # CONFIG_IP_MULTICAST is not set
@@ -304,7 +314,7 @@ CONFIG_IP_PNP_BOOTP=y
 # CONFIG_INET_ESP is not set
 # CONFIG_INET_IPCOMP is not set
 # CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_TUNNEL=m
 # CONFIG_INET_XFRM_MODE_TRANSPORT is not set
 # CONFIG_INET_XFRM_MODE_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_BEET is not set
@@ -315,7 +325,25 @@ CONFIG_INET_TCP_DIAG=y
 CONFIG_TCP_CONG_CUBIC=y
 CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_TCP_MD5SIG is not set
-# CONFIG_IPV6 is not set
+CONFIG_IPV6=m
+# CONFIG_IPV6_PRIVACY is not set
+# CONFIG_IPV6_ROUTER_PREF is not set
+# CONFIG_IPV6_OPTIMISTIC_DAD is not set
+# CONFIG_INET6_AH is not set
+# CONFIG_INET6_ESP is not set
+# CONFIG_INET6_IPCOMP is not set
+# CONFIG_IPV6_MIP6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
+CONFIG_INET6_XFRM_MODE_TRANSPORT=m
+CONFIG_INET6_XFRM_MODE_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_BEET=m
+# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
+CONFIG_IPV6_SIT=m
+CONFIG_IPV6_NDISC_NODETYPE=y
+# CONFIG_IPV6_TUNNEL is not set
+# CONFIG_IPV6_MULTIPLE_TABLES is not set
+# CONFIG_IPV6_MROUTE is not set
 # CONFIG_NETWORK_SECMARK is not set
 # CONFIG_NETFILTER is not set
 # CONFIG_IP_DCCP is not set
@@ -365,6 +393,8 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_DEBUG_DRIVER is not set
 # CONFIG_DEBUG_DEVRES is not set
 # CONFIG_SYS_HYPERVISOR is not set
@@ -447,8 +477,17 @@ CONFIG_MTD_PHYSMAP_OF=y
 #
 # UBI - Unsorted block images
 #
-# CONFIG_MTD_UBI is not set
+CONFIG_MTD_UBI=m
+CONFIG_MTD_UBI_WL_THRESHOLD=4096
+CONFIG_MTD_UBI_BEB_RESERVE=1
+CONFIG_MTD_UBI_GLUEBI=y
+
+#
+# UBI debugging options
+#
+# CONFIG_MTD_UBI_DEBUG is not set
 CONFIG_OF_DEVICE=y
+CONFIG_OF_I2C=m
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_FD is not set
@@ -460,6 +499,7 @@ CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_LOOP is not set
 # CONFIG_BLK_DEV_NBD is not set
 # CONFIG_BLK_DEV_SX8 is not set
+# CONFIG_BLK_DEV_UB is not set
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=35000
@@ -467,12 +507,14 @@ CONFIG_BLK_DEV_RAM_SIZE=35000
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
 # CONFIG_XILINX_SYSACE is not set
+# CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_PHANTOM is not set
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_HP_ILO is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -480,9 +522,41 @@ CONFIG_HAVE_IDE=y
 # SCSI device support
 #
 # CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
+CONFIG_SCSI=m
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
 # CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=m
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+# CONFIG_SCSI_MULTI_LUN is not set
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+# CONFIG_SCSI_LOWLEVEL is not set
+# CONFIG_SCSI_DH is not set
 # CONFIG_ATA is not set
 # CONFIG_MD is not set
 # CONFIG_FUSION is not set
@@ -499,7 +573,6 @@ CONFIG_HAVE_IDE=y
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -534,7 +607,6 @@ CONFIG_NETDEV_1000=y
 # CONFIG_DL2K is not set
 # CONFIG_E1000 is not set
 # CONFIG_E1000E is not set
-# CONFIG_E1000E_ENABLED is not set
 # CONFIG_IP1000 is not set
 # CONFIG_IGB is not set
 # CONFIG_NS83820 is not set
@@ -549,6 +621,7 @@ CONFIG_NETDEV_1000=y
 # CONFIG_BNX2 is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
+# CONFIG_ATL1E is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
 # CONFIG_CHELSIO_T3 is not set
@@ -570,11 +643,21 @@ CONFIG_NETDEV_10000=y
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
 # CONFIG_IWLWIFI_LEDS is not set
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
 # CONFIG_WAN is not set
 # CONFIG_FDDI is not set
 # CONFIG_HIPPI is not set
 # CONFIG_PPP is not set
 # CONFIG_SLIP is not set
+# CONFIG_NET_FC is not set
 # CONFIG_NETCONSOLE is not set
 # CONFIG_NETPOLL is not set
 # CONFIG_NET_POLL_CONTROLLER is not set
@@ -635,8 +718,77 @@ CONFIG_XILINX_HWICAP=m
 # CONFIG_RAW_DRIVER is not set
 # CONFIG_TCG_TPM is not set
 CONFIG_DEVPORT=y
-# CONFIG_I2C is not set
+CONFIG_I2C=m
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_CHARDEV=m
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# PC SMBus host controller drivers
+#
+# CONFIG_I2C_ALI1535 is not set
+# CONFIG_I2C_ALI1563 is not set
+# CONFIG_I2C_ALI15X3 is not set
+# CONFIG_I2C_AMD756 is not set
+# CONFIG_I2C_AMD8111 is not set
+# CONFIG_I2C_I801 is not set
+# CONFIG_I2C_ISCH is not set
+# CONFIG_I2C_PIIX4 is not set
+# CONFIG_I2C_NFORCE2 is not set
+# CONFIG_I2C_SIS5595 is not set
+# CONFIG_I2C_SIS630 is not set
+# CONFIG_I2C_SIS96X is not set
+# CONFIG_I2C_VIA is not set
+# CONFIG_I2C_VIAPRO is not set
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+CONFIG_I2C_IBM_IIC=m
+# CONFIG_I2C_MPC is not set
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Graphics adapter I2C/DDC channel drivers
+#
+# CONFIG_I2C_VOODOO3 is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_DS1682 is not set
+# CONFIG_AT24 is not set
+# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
 # CONFIG_SPI is not set
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+# CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
@@ -653,6 +805,7 @@ CONFIG_SSB_POSSIBLE=y
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
 
@@ -686,22 +839,113 @@ CONFIG_SSB_POSSIBLE=y
 # Display device support
 #
 # CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Sound
-#
 # CONFIG_SOUND is not set
 CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
 CONFIG_USB_ARCH_HAS_EHCI=y
-# CONFIG_USB is not set
+CONFIG_USB=m
+# CONFIG_USB_DEBUG is not set
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
+
+#
+# Miscellaneous USB options
+#
+# CONFIG_USB_DEVICEFS is not set
+CONFIG_USB_DEVICE_CLASS=y
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_OTG is not set
 # CONFIG_USB_OTG_WHITELIST is not set
 # CONFIG_USB_OTG_BLACKLIST_HUB is not set
 
 #
+# USB Host Controller Drivers
+#
+# CONFIG_USB_C67X00_HCD is not set
+CONFIG_USB_EHCI_HCD=m
+# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
+# CONFIG_USB_EHCI_TT_NEWSCHED is not set
+CONFIG_USB_EHCI_BIG_ENDIAN_MMIO=y
+CONFIG_USB_EHCI_BIG_ENDIAN_DESC=y
+CONFIG_USB_EHCI_HCD_PPC_OF=y
+# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
+CONFIG_USB_OHCI_HCD=m
+CONFIG_USB_OHCI_HCD_PPC_OF=y
+CONFIG_USB_OHCI_HCD_PPC_OF_BE=y
+# CONFIG_USB_OHCI_HCD_PPC_OF_LE is not set
+# CONFIG_USB_OHCI_HCD_PCI is not set
+CONFIG_USB_OHCI_BIG_ENDIAN_DESC=y
+CONFIG_USB_OHCI_BIG_ENDIAN_MMIO=y
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+# CONFIG_USB_UHCI_HCD is not set
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
+
+#
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
 #
+
+#
+# may also be needed; see USB_STORAGE Help for more information
+#
+CONFIG_USB_STORAGE=m
+# CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_ISD200 is not set
+# CONFIG_USB_STORAGE_DPCM is not set
+# CONFIG_USB_STORAGE_USBAT is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+# CONFIG_USB_MON is not set
+
+#
+# USB port drivers
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_AUERSWALD is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_PHIDGET is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_SISUSBVGA is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_ISIGHTFW is not set
 # CONFIG_USB_GADGET is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
@@ -719,8 +963,13 @@ CONFIG_USB_ARCH_HAS_EHCI=y
 CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XATTR is not set
 # CONFIG_EXT2_FS_XIP is not set
-# CONFIG_EXT3_FS is not set
+CONFIG_EXT3_FS=m
+CONFIG_EXT3_FS_XATTR=y
+# CONFIG_EXT3_FS_POSIX_ACL is not set
+# CONFIG_EXT3_FS_SECURITY is not set
 # CONFIG_EXT4DEV_FS is not set
+CONFIG_JBD=m
+CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
@@ -743,8 +992,11 @@ CONFIG_INOTIFY_USER=y
 #
 # DOS/FAT/NT Filesystems
 #
+CONFIG_FAT_FS=m
 # CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
+CONFIG_VFAT_FS=m
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
 # CONFIG_NTFS_FS is not set
 
 #
@@ -780,9 +1032,16 @@ CONFIG_JFFS2_ZLIB=y
 # CONFIG_JFFS2_LZO is not set
 CONFIG_JFFS2_RTIME=y
 # CONFIG_JFFS2_RUBIN is not set
+CONFIG_UBIFS_FS=m
+CONFIG_UBIFS_FS_XATTR=y
+# CONFIG_UBIFS_FS_ADVANCED_COMPR is not set
+CONFIG_UBIFS_FS_LZO=y
+CONFIG_UBIFS_FS_ZLIB=y
+# CONFIG_UBIFS_FS_DEBUG is not set
 CONFIG_CRAMFS=y
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
 # CONFIG_ROMFS_FS is not set
@@ -793,13 +1052,12 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 # CONFIG_NFS_V4 is not set
-# CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -813,7 +1071,46 @@ CONFIG_SUNRPC=y
 #
 # CONFIG_PARTITION_ADVANCED is not set
 CONFIG_MSDOS_PARTITION=y
-# CONFIG_NLS is not set
+CONFIG_NLS=m
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=m
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+CONFIG_NLS_ISO8859_1=m
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
 # CONFIG_DLM is not set
 
 #
@@ -822,13 +1119,16 @@ CONFIG_MSDOS_PARTITION=y
 CONFIG_BITREVERSE=y
 # CONFIG_GENERIC_FIND_FIRST_BIT is not set
 # CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
+CONFIG_CRC16=m
+CONFIG_CRC_T10DIF=m
 # CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
 # CONFIG_LIBCRC32C is not set
 CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=y
+CONFIG_LZO_COMPRESS=m
+CONFIG_LZO_DECOMPRESS=m
 CONFIG_PLIST=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
@@ -849,6 +1149,8 @@ CONFIG_MAGIC_SYSRQ=y
 CONFIG_DEBUG_KERNEL=y
 # CONFIG_DEBUG_SHIRQ is not set
 CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
 CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
@@ -866,19 +1168,28 @@ CONFIG_DEBUG_BUGVERBOSE=y
 # CONFIG_DEBUG_INFO is not set
 # CONFIG_DEBUG_VM is not set
 # CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+# CONFIG_FTRACE is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
 # CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
 # CONFIG_DEBUG_PAGEALLOC is not set
-# CONFIG_DEBUGGER is not set
 # CONFIG_CODE_PATCHING_SELFTEST is not set
 # CONFIG_FTR_FIXUP_SELFTEST is not set
+# CONFIG_XMON is not set
 # CONFIG_IRQSTACKS is not set
 # CONFIG_BDI_SWITCH is not set
 # CONFIG_PPC_EARLY_DEBUG is not set
@@ -934,6 +1245,10 @@ CONFIG_CRYPTO_PCBC=y
 # CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=y
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
 # CONFIG_CRYPTO_SHA1 is not set
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
@@ -962,8 +1277,8 @@ CONFIG_CRYPTO_DES=y
 #
 # Compression
 #
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_LZO is not set
+CONFIG_CRYPTO_DEFLATE=m
+CONFIG_CRYPTO_LZO=m
 # CONFIG_CRYPTO_HW is not set
 # CONFIG_PPC_CLOCK is not set
 # CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/ppc64_defconfig b/arch/powerpc/configs/ppc64_defconfig
index ce250bc98584..fc5930caeb5f 100644
--- a/arch/powerpc/configs/ppc64_defconfig
+++ b/arch/powerpc/configs/ppc64_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc6
-# Mon Jun 16 21:11:19 2008
+# Linux kernel version: 2.6.27-rc4
+# Tue Aug 26 13:22:03 2008
 #
 CONFIG_PPC64=y
 
@@ -14,6 +14,7 @@ CONFIG_POWER4=y
 # CONFIG_TUNE_CELL is not set
 CONFIG_PPC_FPU=y
 CONFIG_ALTIVEC=y
+CONFIG_VSX=y
 CONFIG_PPC_STD_MMU=y
 CONFIG_PPC_MM_SLICES=y
 CONFIG_VIRT_CPU_ACCOUNTING=y
@@ -31,6 +32,7 @@ CONFIG_GENERIC_HARDIRQS=y
 CONFIG_HAVE_SETUP_PER_CPU_AREA=y
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
 CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
@@ -105,7 +107,6 @@ CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 CONFIG_SYSCTL=y
 # CONFIG_EMBEDDED is not set
 CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
@@ -129,14 +130,20 @@ CONFIG_SLUB_DEBUG=y
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
 CONFIG_PROFILING=y
-# CONFIG_MARKERS is not set
+CONFIG_MARKERS=y
 CONFIG_OPROFILE=y
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
+CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
-# CONFIG_HAVE_DMA_ATTRS is not set
+CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_HAVE_DMA_ATTRS=y
+CONFIG_USE_GENERIC_SMP_HELPERS=y
+# CONFIG_HAVE_CLK is not set
 CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
@@ -152,6 +159,7 @@ CONFIG_STOP_MACHINE=y
 CONFIG_BLOCK=y
 CONFIG_BLK_DEV_IO_TRACE=y
 CONFIG_BLK_DEV_BSG=y
+# CONFIG_BLK_DEV_INTEGRITY is not set
 CONFIG_BLOCK_COMPAT=y
 
 #
@@ -172,14 +180,13 @@ CONFIG_CLASSIC_RCU=y
 # Platform support
 #
 CONFIG_PPC_MULTIPLATFORM=y
-# CONFIG_PPC_82xx is not set
-# CONFIG_PPC_83xx is not set
-# CONFIG_PPC_86xx is not set
 CONFIG_PPC_PSERIES=y
 CONFIG_PPC_SPLPAR=y
 CONFIG_EEH=y
 CONFIG_SCANLOG=m
 CONFIG_LPARCFG=y
+CONFIG_PPC_SMLPAR=y
+CONFIG_CMM=y
 CONFIG_PPC_ISERIES=y
 
 #
@@ -189,8 +196,6 @@ CONFIG_VIODASD=y
 CONFIG_VIOCD=m
 CONFIG_VIOTAPE=m
 CONFIG_VIOPATH=y
-# CONFIG_PPC_MPC512x is not set
-# CONFIG_PPC_MPC5121 is not set
 CONFIG_PPC_PMAC=y
 CONFIG_PPC_PMAC64=y
 CONFIG_PPC_MAPLE=y
@@ -213,11 +218,15 @@ CONFIG_PPC_CELLEB=y
 #
 CONFIG_SPU_FS=m
 CONFIG_SPU_FS_64K_LS=y
+# CONFIG_SPU_TRACE is not set
 CONFIG_SPU_BASE=y
 CONFIG_CBE_RAS=y
+CONFIG_PPC_IBM_CELL_RESETBUTTON=y
+CONFIG_PPC_IBM_CELL_POWERBUTTON=m
 CONFIG_CBE_THERM=m
 CONFIG_CBE_CPUFREQ=m
 CONFIG_CBE_CPUFREQ_PMI=m
+CONFIG_CBE_CPUFREQ_SPU_GOVERNOR=m
 CONFIG_OPROFILE_CELL=y
 # CONFIG_PQ2ADS is not set
 CONFIG_PPC_NATIVE=y
@@ -279,7 +288,7 @@ CONFIG_HZ_250=y
 # CONFIG_HZ_300 is not set
 # CONFIG_HZ_1000 is not set
 CONFIG_HZ=250
-# CONFIG_SCHED_HRTICK is not set
+CONFIG_SCHED_HRTICK=y
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
@@ -315,8 +324,10 @@ CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
 CONFIG_SPARSEMEM_VMEMMAP=y
 CONFIG_MEMORY_HOTPLUG=y
 CONFIG_MEMORY_HOTPLUG_SPARSE=y
+CONFIG_MEMORY_HOTREMOVE=y
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_MIGRATION=y
 CONFIG_RESOURCES_64BIT=y
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
@@ -327,6 +338,7 @@ CONFIG_FORCE_MAX_ZONEORDER=13
 # CONFIG_SCHED_SMT is not set
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
+CONFIG_EXTRA_TARGETS=""
 CONFIG_ARCH_WANTS_FREEZER_CONTROL=y
 # CONFIG_PM is not set
 CONFIG_SECCOMP=y
@@ -370,10 +382,6 @@ CONFIG_HOTPLUG_PCI_RPA_DLPAR=m
 CONFIG_PAGE_OFFSET=0xc000000000000000
 CONFIG_KERNEL_START=0xc000000000000000
 CONFIG_PHYSICAL_START=0x00000000
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -387,6 +395,7 @@ CONFIG_XFRM_USER=m
 # CONFIG_XFRM_SUB_POLICY is not set
 # CONFIG_XFRM_MIGRATE is not set
 # CONFIG_XFRM_STATISTICS is not set
+CONFIG_XFRM_IPCOMP=m
 CONFIG_NET_KEY=m
 # CONFIG_NET_KEY_MIGRATE is not set
 CONFIG_INET=y
@@ -578,6 +587,8 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_DEBUG_DRIVER is not set
 # CONFIG_DEBUG_DEVRES is not set
 # CONFIG_SYS_HYPERVISOR is not set
@@ -603,12 +614,14 @@ CONFIG_BLK_DEV_RAM_SIZE=65536
 # CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_PHANTOM is not set
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_HP_ILO is not set
 CONFIG_HAVE_IDE=y
 CONFIG_IDE=y
 CONFIG_BLK_DEV_IDE=y
@@ -616,6 +629,7 @@ CONFIG_BLK_DEV_IDE=y
 #
 # Please see Documentation/ide/ide.txt for help/info on IDE drives
 #
+CONFIG_IDE_TIMINGS=y
 # CONFIG_BLK_DEV_IDE_SATA is not set
 CONFIG_BLK_DEV_IDEDISK=y
 # CONFIG_IDEDISK_MULTI_MODE is not set
@@ -649,10 +663,8 @@ CONFIG_BLK_DEV_IDEDMA_PCI=y
 CONFIG_BLK_DEV_AMD74XX=y
 # CONFIG_BLK_DEV_CMD64X is not set
 # CONFIG_BLK_DEV_TRIFLEX is not set
-# CONFIG_BLK_DEV_CY82C693 is not set
 # CONFIG_BLK_DEV_CS5520 is not set
 # CONFIG_BLK_DEV_CS5530 is not set
-# CONFIG_BLK_DEV_HPT34X is not set
 # CONFIG_BLK_DEV_HPT366 is not set
 # CONFIG_BLK_DEV_JMICRON is not set
 # CONFIG_BLK_DEV_SC1200 is not set
@@ -674,8 +686,6 @@ CONFIG_BLK_DEV_IDE_PMAC=y
 CONFIG_BLK_DEV_IDE_PMAC_ATA100FIRST=y
 CONFIG_BLK_DEV_IDEDMA_PMAC=y
 CONFIG_BLK_DEV_IDEDMA=y
-# CONFIG_BLK_DEV_HD_ONLY is not set
-# CONFIG_BLK_DEV_HD is not set
 
 #
 # SCSI device support
@@ -737,6 +747,8 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_GDTH is not set
 # CONFIG_SCSI_IPS is not set
 CONFIG_SCSI_IBMVSCSI=y
+CONFIG_SCSI_IBMVFC=m
+CONFIG_SCSI_IBMVFC_TRACE=y
 # CONFIG_SCSI_INITIO is not set
 # CONFIG_SCSI_INIA100 is not set
 # CONFIG_SCSI_MVSAS is not set
@@ -758,6 +770,7 @@ CONFIG_SCSI_LPFC=m
 CONFIG_SCSI_DEBUG=m
 # CONFIG_SCSI_SRP is not set
 # CONFIG_SCSI_LOWLEVEL_PCMCIA is not set
+# CONFIG_SCSI_DH is not set
 CONFIG_ATA=y
 CONFIG_ATA_NONSTANDARD=y
 CONFIG_SATA_PMP=y
@@ -837,9 +850,6 @@ CONFIG_DM_SNAPSHOT=m
 CONFIG_DM_MIRROR=m
 CONFIG_DM_ZERO=m
 CONFIG_DM_MULTIPATH=m
-CONFIG_DM_MULTIPATH_EMC=m
-# CONFIG_DM_MULTIPATH_RDAC is not set
-# CONFIG_DM_MULTIPATH_HP is not set
 # CONFIG_DM_DELAY is not set
 # CONFIG_DM_UEVENT is not set
 # CONFIG_FUSION is not set
@@ -847,29 +857,21 @@ CONFIG_DM_MULTIPATH_EMC=m
 #
 # IEEE 1394 (FireWire) support
 #
-# CONFIG_FIREWIRE is not set
-CONFIG_IEEE1394=y
-
-#
-# Subsystem Options
-#
-# CONFIG_IEEE1394_VERBOSEDEBUG is not set
 
 #
-# Controllers
+# Enable only one of the two stacks, unless you know what you are doing
 #
-# CONFIG_IEEE1394_PCILYNX is not set
+# CONFIG_FIREWIRE is not set
+CONFIG_IEEE1394=y
 CONFIG_IEEE1394_OHCI1394=y
-
-#
-# Protocols
-#
-CONFIG_IEEE1394_VIDEO1394=m
+# CONFIG_IEEE1394_PCILYNX is not set
 CONFIG_IEEE1394_SBP2=m
 CONFIG_IEEE1394_ETH1394_ROM_ENTRY=y
 CONFIG_IEEE1394_ETH1394=m
-CONFIG_IEEE1394_DV1394=m
 CONFIG_IEEE1394_RAWIO=y
+CONFIG_IEEE1394_VIDEO1394=m
+CONFIG_IEEE1394_DV1394=m
+# CONFIG_IEEE1394_VERBOSEDEBUG is not set
 # CONFIG_I2O is not set
 CONFIG_MACINTOSH_DRIVERS=y
 CONFIG_ADB_PMU=y
@@ -884,7 +886,6 @@ CONFIG_WINDFARM_PM112=y
 CONFIG_WINDFARM_PM121=y
 # CONFIG_PMAC_RACKMETER is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 CONFIG_DUMMY=m
 CONFIG_BONDING=m
 # CONFIG_MACVLAN is not set
@@ -942,6 +943,7 @@ CONFIG_E100=y
 # CONFIG_SIS900 is not set
 # CONFIG_EPIC100 is not set
 # CONFIG_SUNDANCE is not set
+# CONFIG_TLAN is not set
 # CONFIG_VIA_RHINE is not set
 # CONFIG_SC92031 is not set
 CONFIG_NETDEV_1000=y
@@ -949,10 +951,8 @@ CONFIG_ACENIC=y
 CONFIG_ACENIC_OMIT_TIGON_I=y
 # CONFIG_DL2K is not set
 CONFIG_E1000=y
-# CONFIG_E1000_NAPI is not set
 # CONFIG_E1000_DISABLE_PACKET_SPLIT is not set
 # CONFIG_E1000E is not set
-# CONFIG_E1000E_ENABLED is not set
 # CONFIG_IP1000 is not set
 # CONFIG_IGB is not set
 # CONFIG_NS83820 is not set
@@ -968,13 +968,13 @@ CONFIG_TIGON3=y
 CONFIG_SPIDER_NET=m
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
+# CONFIG_ATL1E is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
 # CONFIG_CHELSIO_T3 is not set
 CONFIG_EHEA=m
 # CONFIG_IXGBE is not set
 CONFIG_IXGB=m
-# CONFIG_IXGB_NAPI is not set
 # CONFIG_S2IO is not set
 # CONFIG_MYRI10GE is not set
 # CONFIG_NETXEN_NIC is not set
@@ -1068,6 +1068,7 @@ CONFIG_MOUSE_PS2_TRACKPOINT=y
 # CONFIG_MOUSE_PS2_TOUCHKIT is not set
 # CONFIG_MOUSE_SERIAL is not set
 # CONFIG_MOUSE_APPLETOUCH is not set
+# CONFIG_MOUSE_BCM5974 is not set
 # CONFIG_MOUSE_VSXXXAA is not set
 # CONFIG_INPUT_JOYSTICK is not set
 # CONFIG_INPUT_TABLET is not set
@@ -1090,12 +1091,14 @@ CONFIG_SERIO_I8042=y
 # CONFIG_SERIO_PCIPS2 is not set
 CONFIG_SERIO_LIBPS2=y
 # CONFIG_SERIO_RAW is not set
+# CONFIG_SERIO_XILINX_XPS_PS2 is not set
 # CONFIG_GAMEPORT is not set
 
 #
 # Character devices
 #
 CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
 # CONFIG_VT_HW_CONSOLE_BINDING is not set
@@ -1131,11 +1134,13 @@ CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
 CONFIG_HVC_DRIVER=y
+CONFIG_HVC_IRQ=y
 CONFIG_HVC_CONSOLE=y
 CONFIG_HVC_ISERIES=y
 CONFIG_HVC_RTAS=y
 CONFIG_HVC_BEAT=y
 CONFIG_HVCS=m
+CONFIG_IBM_BSR=m
 # CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
 # CONFIG_R3964 is not set
@@ -1156,45 +1161,70 @@ CONFIG_DEVPORT=y
 CONFIG_I2C=y
 CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
 CONFIG_I2C_ALGOBIT=y
 
 #
 # I2C Hardware Bus support
 #
+
+#
+# PC SMBus host controller drivers
+#
 # CONFIG_I2C_ALI1535 is not set
 # CONFIG_I2C_ALI1563 is not set
 # CONFIG_I2C_ALI15X3 is not set
 # CONFIG_I2C_AMD756 is not set
 CONFIG_I2C_AMD8111=y
 # CONFIG_I2C_I801 is not set
-# CONFIG_I2C_I810 is not set
+# CONFIG_I2C_ISCH is not set
 # CONFIG_I2C_PIIX4 is not set
-CONFIG_I2C_POWERMAC=y
 # CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-CONFIG_I2C_PASEMI=y
-# CONFIG_I2C_PROSAVAGE is not set
-# CONFIG_I2C_SAVAGE4 is not set
-# CONFIG_I2C_SIMTEC is not set
 # CONFIG_I2C_SIS5595 is not set
 # CONFIG_I2C_SIS630 is not set
 # CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_TINY_USB is not set
 # CONFIG_I2C_VIA is not set
 # CONFIG_I2C_VIAPRO is not set
+
+#
+# Mac SMBus host controller drivers
+#
+CONFIG_I2C_POWERMAC=y
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+# CONFIG_I2C_OCORES is not set
+CONFIG_I2C_PASEMI=y
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Graphics adapter I2C/DDC channel drivers
+#
 # CONFIG_I2C_VOODOO3 is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
 # CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
 
 #
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
+# CONFIG_AT24 is not set
 # CONFIG_SENSORS_EEPROM is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
@@ -1203,10 +1233,13 @@ CONFIG_I2C_PASEMI=y
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
 # CONFIG_SPI is not set
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+# CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 # CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
 
 #
@@ -1218,8 +1251,10 @@ CONFIG_SSB_POSSIBLE=y
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
 
 #
 # Multimedia devices
@@ -1299,10 +1334,13 @@ CONFIG_FB_RADEON_BACKLIGHT=y
 # CONFIG_FB_TRIDENT is not set
 # CONFIG_FB_ARK is not set
 # CONFIG_FB_PM3 is not set
+# CONFIG_FB_CARMINE is not set
 CONFIG_FB_IBM_GXT4500=y
 # CONFIG_FB_VIRTUAL is not set
 CONFIG_BACKLIGHT_LCD_SUPPORT=y
 CONFIG_LCD_CLASS_DEVICE=y
+# CONFIG_LCD_ILI9320 is not set
+# CONFIG_LCD_PLATFORM is not set
 CONFIG_BACKLIGHT_CLASS_DEVICE=y
 # CONFIG_BACKLIGHT_CORGI is not set
 
@@ -1331,15 +1369,7 @@ CONFIG_FB_LOGO_EXTRA=y
 CONFIG_LOGO_LINUX_MONO=y
 CONFIG_LOGO_LINUX_VGA16=y
 CONFIG_LOGO_LINUX_CLUT224=y
-
-#
-# Sound
-#
 CONFIG_SOUND=m
-
-#
-# Advanced Linux Sound Architecture
-#
 CONFIG_SND=m
 CONFIG_SND_TIMER=m
 CONFIG_SND_PCM=m
@@ -1355,19 +1385,13 @@ CONFIG_SND_SUPPORT_OLD_API=y
 CONFIG_SND_VERBOSE_PROCFS=y
 # CONFIG_SND_VERBOSE_PRINTK is not set
 # CONFIG_SND_DEBUG is not set
-
-#
-# Generic devices
-#
+CONFIG_SND_DRIVERS=y
 # CONFIG_SND_DUMMY is not set
 # CONFIG_SND_VIRMIDI is not set
 # CONFIG_SND_MTPAV is not set
 # CONFIG_SND_SERIAL_U16550 is not set
 # CONFIG_SND_MPU401 is not set
-
-#
-# PCI devices
-#
+CONFIG_SND_PCI=y
 # CONFIG_SND_AD1889 is not set
 # CONFIG_SND_ALS300 is not set
 # CONFIG_SND_ALS4000 is not set
@@ -1429,20 +1453,9 @@ CONFIG_SND_VERBOSE_PROCFS=y
 # CONFIG_SND_VIRTUOSO is not set
 # CONFIG_SND_VX222 is not set
 # CONFIG_SND_YMFPCI is not set
-
-#
-# ALSA PowerMac devices
-#
+CONFIG_SND_PPC=y
 CONFIG_SND_POWERMAC=m
 CONFIG_SND_POWERMAC_AUTO_DRC=y
-
-#
-# ALSA PowerPC devices
-#
-
-#
-# Apple Onboard Audio driver
-#
 CONFIG_SND_AOA=m
 CONFIG_SND_AOA_FABRIC_LAYOUT=m
 CONFIG_SND_AOA_ONYX=m
@@ -1450,36 +1463,14 @@ CONFIG_SND_AOA_TAS=m
 CONFIG_SND_AOA_TOONIE=m
 CONFIG_SND_AOA_SOUNDBUS=m
 CONFIG_SND_AOA_SOUNDBUS_I2S=m
-
-#
-# USB devices
-#
+CONFIG_SND_USB=y
 # CONFIG_SND_USB_AUDIO is not set
 # CONFIG_SND_USB_USX2Y is not set
 # CONFIG_SND_USB_CAIAQ is not set
-
-#
-# PCMCIA devices
-#
+CONFIG_SND_PCMCIA=y
 # CONFIG_SND_VXPOCKET is not set
 # CONFIG_SND_PDAUDIOCF is not set
-
-#
-# System on Chip audio support
-#
 # CONFIG_SND_SOC is not set
-
-#
-# ALSA SoC audio for Freescale SOCs
-#
-
-#
-# SoC Audio for the Texas Instruments OMAP
-#
-
-#
-# Open Sound System
-#
 # CONFIG_SOUND_PRIME is not set
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
@@ -1508,6 +1499,7 @@ CONFIG_USB_DEVICEFS=y
 CONFIG_USB_DEVICE_CLASS=y
 # CONFIG_USB_DYNAMIC_MINORS is not set
 # CONFIG_USB_OTG is not set
+# CONFIG_USB_MON is not set
 
 #
 # USB Host Controller Drivers
@@ -1556,6 +1548,7 @@ CONFIG_USB_STORAGE=m
 # CONFIG_USB_STORAGE_ALAUDA is not set
 # CONFIG_USB_STORAGE_ONETOUCH is not set
 # CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_SIERRA is not set
 # CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
 # CONFIG_USB_LIBUSUAL is not set
 
@@ -1564,7 +1557,6 @@ CONFIG_USB_STORAGE=m
 #
 # CONFIG_USB_MDC800 is not set
 # CONFIG_USB_MICROTEK is not set
-# CONFIG_USB_MON is not set
 
 #
 # USB port drivers
@@ -1577,7 +1569,6 @@ CONFIG_USB_STORAGE=m
 # CONFIG_USB_EMI62 is not set
 # CONFIG_USB_EMI26 is not set
 # CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_AUERSWALD is not set
 # CONFIG_USB_RIO500 is not set
 # CONFIG_USB_LEGOTOWER is not set
 # CONFIG_USB_LCD is not set
@@ -1769,6 +1760,7 @@ CONFIG_HFSPLUS_FS=m
 CONFIG_CRAMFS=y
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
 # CONFIG_ROMFS_FS is not set
@@ -1779,12 +1771,12 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 CONFIG_NFS_V3_ACL=y
 CONFIG_NFS_V4=y
+CONFIG_ROOT_NFS=y
 CONFIG_NFSD=m
 CONFIG_NFSD_V2_ACL=y
 CONFIG_NFSD_V3=y
 CONFIG_NFSD_V3_ACL=y
 CONFIG_NFSD_V4=y
-CONFIG_ROOT_NFS=y
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_EXPORTFS=m
@@ -1793,7 +1785,6 @@ CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 CONFIG_SUNRPC_GSS=y
 CONFIG_SUNRPC_XPRT_RDMA=m
-# CONFIG_SUNRPC_BIND34 is not set
 CONFIG_RPCSEC_GSS_KRB5=y
 CONFIG_RPCSEC_GSS_SPKM3=m
 # CONFIG_SMB_FS is not set
@@ -1878,6 +1869,7 @@ CONFIG_BITREVERSE=y
 # CONFIG_GENERIC_FIND_FIRST_BIT is not set
 CONFIG_CRC_CCITT=m
 # CONFIG_CRC16 is not set
+CONFIG_CRC_T10DIF=y
 CONFIG_CRC_ITU_T=m
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
@@ -1910,8 +1902,10 @@ CONFIG_DEBUG_FS=y
 CONFIG_DEBUG_KERNEL=y
 # CONFIG_DEBUG_SHIRQ is not set
 CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
 CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
+CONFIG_SCHEDSTATS=y
 # CONFIG_TIMER_STATS is not set
 # CONFIG_DEBUG_OBJECTS is not set
 # CONFIG_SLUB_DEBUG_ON is not set
@@ -1923,28 +1917,47 @@ CONFIG_DEBUG_MUTEXES=y
 # CONFIG_DEBUG_LOCK_ALLOC is not set
 # CONFIG_PROVE_LOCKING is not set
 # CONFIG_LOCK_STAT is not set
+CONFIG_TRACE_IRQFLAGS=y
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
 # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+CONFIG_STACKTRACE=y
 # CONFIG_DEBUG_KOBJECT is not set
 CONFIG_DEBUG_BUGVERBOSE=y
 # CONFIG_DEBUG_INFO is not set
 # CONFIG_DEBUG_VM is not set
 # CONFIG_DEBUG_WRITECOUNT is not set
+CONFIG_DEBUG_MEMORY_INIT=y
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
+CONFIG_FRAME_POINTER=y
 # CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_FAULT_INJECTION is not set
+CONFIG_LATENCYTOP=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_TRACER_MAX_TRACE=y
+CONFIG_TRACING=y
+# CONFIG_FTRACE is not set
+CONFIG_IRQSOFF_TRACER=y
+CONFIG_SCHED_TRACER=y
+CONFIG_CONTEXT_SWITCH_TRACER=y
+# CONFIG_FTRACE_STARTUP_TEST is not set
 # CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
 CONFIG_DEBUG_STACKOVERFLOW=y
 CONFIG_DEBUG_STACK_USAGE=y
 # CONFIG_DEBUG_PAGEALLOC is not set
 # CONFIG_HCALL_STATS is not set
-CONFIG_DEBUGGER=y
+# CONFIG_CODE_PATCHING_SELFTEST is not set
+# CONFIG_FTR_FIXUP_SELFTEST is not set
 CONFIG_XMON=y
 # CONFIG_XMON_DEFAULT is not set
 CONFIG_XMON_DISASSEMBLY=y
+CONFIG_DEBUGGER=y
 CONFIG_IRQSTACKS=y
 # CONFIG_VIRQ_DEBUG is not set
 CONFIG_BOOTX_TEXT=y
@@ -2007,6 +2020,10 @@ CONFIG_CRYPTO_CRC32C=m
 CONFIG_CRYPTO_MD4=m
 CONFIG_CRYPTO_MD5=y
 CONFIG_CRYPTO_MICHAEL_MIC=m
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
 CONFIG_CRYPTO_SHA1=m
 CONFIG_CRYPTO_SHA256=m
 CONFIG_CRYPTO_SHA512=m
diff --git a/arch/powerpc/configs/ppc6xx_defconfig b/arch/powerpc/configs/ppc6xx_defconfig
index e6e91c85da31..3c6dbdef56eb 100644
--- a/arch/powerpc/configs/ppc6xx_defconfig
+++ b/arch/powerpc/configs/ppc6xx_defconfig
@@ -1,8 +1,7 @@
-# powerpc
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-git2
-# Tue Jul 15 23:54:18 2008
+# Linux kernel version: 2.6.27-rc4
+# Tue Aug 26 13:29:50 2008
 #
 # CONFIG_PPC64 is not set
 
@@ -112,7 +111,6 @@ CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 CONFIG_SYSCTL=y
 # CONFIG_EMBEDDED is not set
 CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
 CONFIG_KALLSYMS_EXTRA_PASS=y
@@ -140,12 +138,17 @@ CONFIG_MARKERS=y
 CONFIG_OPROFILE=m
 CONFIG_HAVE_OPROFILE=y
 CONFIG_KPROBES=y
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
 CONFIG_KRETPROBES=y
+CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
 # CONFIG_HAVE_DMA_ATTRS is not set
 # CONFIG_USE_GENERIC_SMP_HELPERS is not set
+CONFIG_HAVE_CLK=y
 CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
@@ -266,7 +269,6 @@ CONFIG_TAU=y
 CONFIG_TAU_AVERAGE=y
 CONFIG_QUICC_ENGINE=y
 CONFIG_CPM2=y
-CONFIG_PPC_CPM_NEW_BINDING=y
 CONFIG_FSL_ULI1575=y
 CONFIG_CPM=y
 CONFIG_PPC_BESTCOMM=y
@@ -287,7 +289,7 @@ CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
 # CONFIG_HZ_300 is not set
 CONFIG_HZ_1000=y
 CONFIG_HZ=1000
-# CONFIG_SCHED_HRTICK is not set
+CONFIG_SCHED_HRTICK=y
 # CONFIG_PREEMPT_NONE is not set
 CONFIG_PREEMPT_VOLUNTARY=y
 # CONFIG_PREEMPT is not set
@@ -311,6 +313,7 @@ CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_MIGRATION is not set
 CONFIG_RESOURCES_64BIT=y
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
@@ -326,6 +329,7 @@ CONFIG_PM_DEBUG=y
 CONFIG_CAN_PM_TRACE=y
 CONFIG_PM_SLEEP=y
 CONFIG_SUSPEND=y
+# CONFIG_PM_TEST_SUSPEND is not set
 CONFIG_SUSPEND_FREEZER=y
 CONFIG_HIBERNATION=y
 CONFIG_PM_STD_PARTITION=""
@@ -344,6 +348,7 @@ CONFIG_FSL_SOC=y
 CONFIG_FSL_PCI=y
 CONFIG_FSL_LBC=y
 CONFIG_FSL_GTM=y
+CONFIG_PPC_PCI_CHOICE=y
 CONFIG_PCI=y
 CONFIG_PCI_DOMAINS=y
 CONFIG_PCI_SYSCALL=y
@@ -395,10 +400,6 @@ CONFIG_KERNEL_START=0xc0000000
 CONFIG_PHYSICAL_START=0x00000000
 # CONFIG_TASK_SIZE_BOOL is not set
 CONFIG_TASK_SIZE=0xc0000000
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -412,6 +413,7 @@ CONFIG_XFRM_USER=y
 CONFIG_XFRM_SUB_POLICY=y
 CONFIG_XFRM_MIGRATE=y
 CONFIG_XFRM_STATISTICS=y
+CONFIG_XFRM_IPCOMP=m
 CONFIG_NET_KEY=m
 CONFIG_NET_KEY_MIGRATE=y
 CONFIG_INET=y
@@ -602,6 +604,7 @@ CONFIG_IP_NF_TARGET_ECN=m
 CONFIG_IP_NF_TARGET_TTL=m
 CONFIG_IP_NF_TARGET_CLUSTERIP=m
 CONFIG_IP_NF_RAW=m
+CONFIG_IP_NF_SECURITY=m
 CONFIG_IP_NF_ARPTABLES=m
 CONFIG_IP_NF_ARPFILTER=m
 CONFIG_IP_NF_ARP_MANGLE=m
@@ -626,6 +629,7 @@ CONFIG_IP6_NF_TARGET_REJECT=m
 CONFIG_IP6_NF_MANGLE=m
 CONFIG_IP6_NF_TARGET_HL=m
 CONFIG_IP6_NF_RAW=m
+CONFIG_IP6_NF_SECURITY=m
 
 #
 # DECnet: Netfilter Configuration
@@ -643,6 +647,7 @@ CONFIG_BRIDGE_EBT_802_3=m
 CONFIG_BRIDGE_EBT_AMONG=m
 CONFIG_BRIDGE_EBT_ARP=m
 CONFIG_BRIDGE_EBT_IP=m
+CONFIG_BRIDGE_EBT_IP6=m
 CONFIG_BRIDGE_EBT_LIMIT=m
 CONFIG_BRIDGE_EBT_MARK=m
 CONFIG_BRIDGE_EBT_PKTTYPE=m
@@ -691,8 +696,10 @@ CONFIG_ATM_LANE=m
 # CONFIG_ATM_MPOA is not set
 CONFIG_ATM_BR2684=m
 # CONFIG_ATM_BR2684_IPFILTER is not set
+CONFIG_STP=m
 CONFIG_BRIDGE=m
 CONFIG_VLAN_8021Q=m
+# CONFIG_VLAN_8021Q_GVRP is not set
 CONFIG_DECNET=m
 CONFIG_DECNET_ROUTER=y
 CONFIG_LLC=m
@@ -832,6 +839,7 @@ CONFIG_BT_HIDP=m
 #
 CONFIG_BT_HCIUSB=m
 CONFIG_BT_HCIUSB_SCO=y
+# CONFIG_BT_HCIBTUSB is not set
 CONFIG_BT_HCIUART=m
 CONFIG_BT_HCIUART_H4=y
 CONFIG_BT_HCIUART_BCSP=y
@@ -855,7 +863,6 @@ CONFIG_NL80211=y
 CONFIG_WIRELESS_EXT=y
 CONFIG_WIRELESS_EXT_SYSFS=y
 CONFIG_MAC80211=m
-CONFIG_MAC80211_QOS=y
 
 #
 # Rate control algorithm selection
@@ -941,12 +948,14 @@ CONFIG_CDROM_PKTCDVD_BUFFERS=8
 # CONFIG_CDROM_PKTCDVD_WCACHE is not set
 # CONFIG_ATA_OVER_ETH is not set
 CONFIG_VIRTIO_BLK=m
+CONFIG_BLK_DEV_HD=y
 CONFIG_MISC_DEVICES=y
 # CONFIG_PHANTOM is not set
 CONFIG_EEPROM_93CX6=m
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
 CONFIG_ENCLOSURE_SERVICES=m
+# CONFIG_HP_ILO is not set
 CONFIG_HAVE_IDE=y
 CONFIG_IDE=y
 CONFIG_BLK_DEV_IDE=y
@@ -954,6 +963,7 @@ CONFIG_BLK_DEV_IDE=y
 #
 # Please see Documentation/ide/ide.txt for help/info on IDE drives
 #
+CONFIG_IDE_TIMINGS=y
 CONFIG_IDE_ATAPI=y
 # CONFIG_BLK_DEV_IDE_SATA is not set
 CONFIG_BLK_DEV_IDEDISK=y
@@ -971,7 +981,6 @@ CONFIG_IDE_PROC_FS=y
 #
 # IDE chipset support/bugfixes
 #
-# CONFIG_IDE_GENERIC is not set
 # CONFIG_BLK_DEV_PLATFORM is not set
 # CONFIG_BLK_DEV_IDEPNP is not set
 CONFIG_BLK_DEV_IDEDMA_SFF=y
@@ -990,10 +999,8 @@ CONFIG_BLK_DEV_IDEDMA_PCI=y
 # CONFIG_BLK_DEV_AMD74XX is not set
 # CONFIG_BLK_DEV_CMD64X is not set
 # CONFIG_BLK_DEV_TRIFLEX is not set
-# CONFIG_BLK_DEV_CY82C693 is not set
 # CONFIG_BLK_DEV_CS5520 is not set
 # CONFIG_BLK_DEV_CS5530 is not set
-# CONFIG_BLK_DEV_HPT34X is not set
 # CONFIG_BLK_DEV_HPT366 is not set
 # CONFIG_BLK_DEV_JMICRON is not set
 # CONFIG_BLK_DEV_SC1200 is not set
@@ -1014,8 +1021,6 @@ CONFIG_BLK_DEV_IDE_PMAC=y
 CONFIG_BLK_DEV_IDE_PMAC_ATA100FIRST=y
 CONFIG_BLK_DEV_IDEDMA_PMAC=y
 CONFIG_BLK_DEV_IDEDMA=y
-CONFIG_BLK_DEV_HD_ONLY=y
-CONFIG_BLK_DEV_HD=y
 
 #
 # SCSI device support
@@ -1125,6 +1130,7 @@ CONFIG_SCSI_DH=y
 CONFIG_SCSI_DH_RDAC=m
 CONFIG_SCSI_DH_HP_SW=m
 CONFIG_SCSI_DH_EMC=m
+# CONFIG_SCSI_DH_ALUA is not set
 CONFIG_ATA=y
 # CONFIG_ATA_NONSTANDARD is not set
 # CONFIG_SATA_PMP is not set
@@ -1246,7 +1252,6 @@ CONFIG_WINDFARM=y
 # CONFIG_ANSLCD is not set
 CONFIG_PMAC_RACKMETER=m
 CONFIG_NETDEVICES=y
-CONFIG_NETDEVICES_MULTIQUEUE=y
 CONFIG_IFB=m
 CONFIG_DUMMY=m
 CONFIG_BONDING=m
@@ -1256,7 +1261,7 @@ CONFIG_TUN=m
 CONFIG_VETH=m
 CONFIG_NET_SB1000=m
 # CONFIG_ARCNET is not set
-CONFIG_PHYLIB=m
+CONFIG_PHYLIB=y
 
 #
 # MII PHY device drivers
@@ -1271,7 +1276,9 @@ CONFIG_SMSC_PHY=m
 CONFIG_BROADCOM_PHY=m
 CONFIG_ICPLUS_PHY=m
 CONFIG_REALTEK_PHY=m
+# CONFIG_FIXED_PHY is not set
 CONFIG_MDIO_BITBANG=y
+# CONFIG_MDIO_OF_GPIO is not set
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=m
 CONFIG_MACE=m
@@ -1328,9 +1335,7 @@ CONFIG_NE2000=m
 CONFIG_NET_PCI=y
 CONFIG_PCNET32=m
 CONFIG_AMD8111_ETH=m
-CONFIG_AMD8111E_NAPI=y
 CONFIG_ADAPTEC_STARFIRE=m
-CONFIG_ADAPTEC_STARFIRE_NAPI=y
 # CONFIG_AC3200 is not set
 # CONFIG_APRICOT is not set
 CONFIG_B44=m
@@ -1359,7 +1364,6 @@ CONFIG_SUNDANCE=m
 CONFIG_TLAN=m
 CONFIG_VIA_RHINE=m
 CONFIG_VIA_RHINE_MMIO=y
-CONFIG_VIA_RHINE_NAPI=y
 CONFIG_SC92031=m
 CONFIG_NET_POCKET=y
 CONFIG_DE600=m
@@ -1372,17 +1376,15 @@ CONFIG_ACENIC=m
 # CONFIG_ACENIC_OMIT_TIGON_I is not set
 CONFIG_DL2K=m
 CONFIG_E1000=m
-CONFIG_E1000_NAPI=y
 # CONFIG_E1000_DISABLE_PACKET_SPLIT is not set
 CONFIG_E1000E=m
-CONFIG_E1000E_ENABLED=y
 CONFIG_IP1000=m
 CONFIG_IGB=m
+CONFIG_IGB_LRO=y
 CONFIG_NS83820=m
 CONFIG_HAMACHI=m
 CONFIG_YELLOWFIN=m
 CONFIG_R8169=m
-CONFIG_R8169_NAPI=y
 CONFIG_R8169_VLAN=y
 CONFIG_SIS190=m
 CONFIG_SKGE=m
@@ -1393,21 +1395,18 @@ CONFIG_VIA_VELOCITY=m
 CONFIG_TIGON3=m
 CONFIG_BNX2=m
 CONFIG_GIANFAR=m
-CONFIG_GFAR_NAPI=y
 # CONFIG_UCC_GETH is not set
 CONFIG_MV643XX_ETH=m
 CONFIG_QLA3XXX=m
 CONFIG_ATL1=m
+# CONFIG_ATL1E is not set
 CONFIG_NETDEV_10000=y
 CONFIG_CHELSIO_T1=m
 CONFIG_CHELSIO_T1_1G=y
-CONFIG_CHELSIO_T1_NAPI=y
 CONFIG_CHELSIO_T3=m
 CONFIG_IXGBE=m
 CONFIG_IXGB=m
-CONFIG_IXGB_NAPI=y
 CONFIG_S2IO=m
-CONFIG_S2IO_NAPI=y
 CONFIG_MYRI10GE=m
 CONFIG_NETXEN_NIC=m
 CONFIG_NIU=m
@@ -1477,8 +1476,7 @@ CONFIG_ATM_IDT77252_USE_SUNI=y
 # CONFIG_ATM_AMBASSADOR is not set
 # CONFIG_ATM_HORIZON is not set
 # CONFIG_ATM_IA is not set
-CONFIG_ATM_FORE200E_MAYBE=m
-# CONFIG_ATM_FORE200E_PCA is not set
+# CONFIG_ATM_FORE200E is not set
 CONFIG_ATM_HE=m
 # CONFIG_ATM_HE_USE_SUNI is not set
 CONFIG_FDDI=y
@@ -1551,6 +1549,7 @@ CONFIG_MOUSE_PS2_TRACKPOINT=y
 # CONFIG_MOUSE_PS2_TOUCHKIT is not set
 CONFIG_MOUSE_SERIAL=m
 CONFIG_MOUSE_APPLETOUCH=m
+# CONFIG_MOUSE_BCM5974 is not set
 # CONFIG_MOUSE_INPORT is not set
 # CONFIG_MOUSE_LOGIBM is not set
 # CONFIG_MOUSE_PC110PAD is not set
@@ -1611,33 +1610,18 @@ CONFIG_SERIO_SERPORT=y
 # CONFIG_SERIO_PCIPS2 is not set
 CONFIG_SERIO_LIBPS2=y
 CONFIG_SERIO_RAW=m
+# CONFIG_SERIO_XILINX_XPS_PS2 is not set
 CONFIG_GAMEPORT=m
 CONFIG_GAMEPORT_NS558=m
 CONFIG_GAMEPORT_L4=m
 CONFIG_GAMEPORT_EMU10K1=m
 CONFIG_GAMEPORT_FM801=m
-CONFIG_INPUT_LIRC=y
-CONFIG_LIRC_DEV=m
-CONFIG_LIRC_ATIUSB=m
-CONFIG_LIRC_BT829=m
-CONFIG_LIRC_CMDIR=m
-CONFIG_LIRC_I2C=m
-CONFIG_LIRC_IGORPLUGUSB=m
-CONFIG_LIRC_IMON=m
-CONFIG_LIRC_IT87=m
-CONFIG_LIRC_MCEUSB=m
-CONFIG_LIRC_MCEUSB2=m
-CONFIG_LIRC_PVR150=m
-CONFIG_LIRC_PARALLEL=m
-CONFIG_LIRC_SERIAL=m
-CONFIG_LIRC_SIR=m
-CONFIG_LIRC_STREAMZAP=m
-CONFIG_LIRC_TTUSBIR=m
 
 #
 # Character devices
 #
 CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
 CONFIG_VT_HW_CONSOLE_BINDING=y
@@ -1701,12 +1685,12 @@ CONFIG_SERIAL_OF_PLATFORM=y
 # CONFIG_SERIAL_QE is not set
 CONFIG_UNIX98_PTYS=y
 # CONFIG_LEGACY_PTYS is not set
-# CONFIG_CRASH is not set
 CONFIG_BRIQ_PANEL=m
 CONFIG_PRINTER=m
 CONFIG_LP_CONSOLE=y
 CONFIG_PPDEV=m
 # CONFIG_HVC_RTAS is not set
+# CONFIG_VIRTIO_CONSOLE is not set
 # CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
 CONFIG_HW_RANDOM_VIRTIO=m
@@ -1728,6 +1712,7 @@ CONFIG_DEVPORT=y
 CONFIG_I2C=y
 CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=m
+CONFIG_I2C_HELPER_AUTO=y
 CONFIG_I2C_ALGOBIT=y
 CONFIG_I2C_ALGOPCA=m
 
@@ -1807,20 +1792,24 @@ CONFIG_SENSORS_TSL2550=m
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
 # CONFIG_SPI is not set
-CONFIG_HAVE_GPIO_LIB=y
-
-#
-# GPIO Support
-#
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
 # CONFIG_DEBUG_GPIO is not set
+CONFIG_GPIO_SYSFS=y
 
 #
 # I2C GPIO expanders:
 #
+# CONFIG_GPIO_MAX732X is not set
 # CONFIG_GPIO_PCA953X is not set
 # CONFIG_GPIO_PCF857X is not set
 
 #
+# PCI GPIO expanders:
+#
+
+#
 # SPI GPIO expanders:
 #
 CONFIG_W1=m
@@ -1850,6 +1839,7 @@ CONFIG_APM_POWER=m
 CONFIG_BATTERY_PMU=m
 CONFIG_HWMON=m
 CONFIG_HWMON_VID=m
+# CONFIG_SENSORS_AD7414 is not set
 CONFIG_SENSORS_AD7418=m
 CONFIG_SENSORS_ADM1021=m
 CONFIG_SENSORS_ADM1025=m
@@ -1913,8 +1903,9 @@ CONFIG_WATCHDOG=y
 # Watchdog Device Drivers
 #
 CONFIG_SOFT_WATCHDOG=m
+# CONFIG_ALIM7101_WDT is not set
 # CONFIG_MPC5200_WDT is not set
-CONFIG_83xx_WDT=m
+# CONFIG_8xxx_WDT is not set
 CONFIG_WATCHDOG_RTAS=m
 
 #
@@ -1953,8 +1944,10 @@ CONFIG_SSB_DRIVER_PCICORE=y
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 CONFIG_MFD_SM501=m
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
 
 #
 # Multimedia devices
@@ -1993,6 +1986,7 @@ CONFIG_MEDIA_TUNER_QT1010=m
 CONFIG_MEDIA_TUNER_XC2028=m
 CONFIG_MEDIA_TUNER_XC5000=m
 CONFIG_MEDIA_TUNER_MXL5005S=m
+CONFIG_MEDIA_TUNER_MXL5007T=m
 CONFIG_VIDEO_V4L2=m
 CONFIG_VIDEO_V4L1=m
 CONFIG_VIDEOBUF_GEN=m
@@ -2000,13 +1994,13 @@ CONFIG_VIDEOBUF_DMA_SG=m
 CONFIG_VIDEOBUF_VMALLOC=m
 CONFIG_VIDEOBUF_DVB=m
 CONFIG_VIDEO_BTCX=m
-CONFIG_VIDEO_IR_I2C=m
 CONFIG_VIDEO_IR=m
 CONFIG_VIDEO_TVEEPROM=m
 CONFIG_VIDEO_TUNER=m
 CONFIG_VIDEO_CAPTURE_DRIVERS=y
 # CONFIG_VIDEO_ADV_DEBUG is not set
 # CONFIG_VIDEO_HELPER_CHIPS_AUTO is not set
+CONFIG_VIDEO_IR_I2C=m
 
 #
 # Encoders/decoders and other helper chips
@@ -2108,6 +2102,8 @@ CONFIG_VIDEO_CX18=m
 # CONFIG_VIDEO_CAFE_CCIC is not set
 CONFIG_V4L_USB_DRIVERS=y
 CONFIG_USB_VIDEO_CLASS=m
+CONFIG_USB_VIDEO_CLASS_INPUT_EVDEV=y
+CONFIG_USB_GSPCA=m
 CONFIG_VIDEO_PVRUSB2=m
 CONFIG_VIDEO_PVRUSB2_SYSFS=y
 CONFIG_VIDEO_PVRUSB2_DVB=y
@@ -2133,11 +2129,14 @@ CONFIG_USB_PWC=m
 # CONFIG_USB_PWC_DEBUG is not set
 CONFIG_USB_ZR364XX=m
 CONFIG_USB_STKWEBCAM=m
+# CONFIG_USB_S2255 is not set
 CONFIG_SOC_CAMERA=m
 CONFIG_SOC_CAMERA_MT9M001=m
 # CONFIG_MT9M001_PCA9536_SWITCH is not set
 CONFIG_SOC_CAMERA_MT9V022=m
 # CONFIG_MT9V022_PCA9536_SWITCH is not set
+# CONFIG_SOC_CAMERA_PLATFORM is not set
+# CONFIG_VIDEO_SH_MOBILE_CEU is not set
 CONFIG_RADIO_ADAPTERS=y
 # CONFIG_RADIO_CADET is not set
 # CONFIG_RADIO_RTRACK is not set
@@ -2194,6 +2193,8 @@ CONFIG_DVB_USB_DTT200U=m
 CONFIG_DVB_USB_OPERA1=m
 CONFIG_DVB_USB_AF9005=m
 CONFIG_DVB_USB_AF9005_REMOTE=m
+# CONFIG_DVB_USB_DW2102 is not set
+# CONFIG_DVB_USB_ANYSEE is not set
 CONFIG_DVB_TTUSB_BUDGET=m
 CONFIG_DVB_TTUSB_DEC=m
 CONFIG_DVB_CINERGYT2=m
@@ -2203,6 +2204,7 @@ CONFIG_DVB_CINERGYT2_STREAM_BUF_SIZE=512
 CONFIG_DVB_CINERGYT2_QUERY_INTERVAL=250
 CONFIG_DVB_CINERGYT2_ENABLE_RC_INPUT_DEVICE=y
 CONFIG_DVB_CINERGYT2_RC_QUERY_INTERVAL=100
+# CONFIG_DVB_SIANO_SMS1XXX is not set
 
 #
 # Supported FlexCopII (B2C2) Adapters
@@ -2253,6 +2255,7 @@ CONFIG_DVB_SP8870=m
 CONFIG_DVB_SP887X=m
 CONFIG_DVB_CX22700=m
 CONFIG_DVB_CX22702=m
+# CONFIG_DVB_DRX397XD is not set
 CONFIG_DVB_L64781=m
 CONFIG_DVB_TDA1004X=m
 CONFIG_DVB_NXT6000=m
@@ -2389,12 +2392,15 @@ CONFIG_FB_TRIDENT=m
 CONFIG_FB_TRIDENT_ACCEL=y
 # CONFIG_FB_ARK is not set
 # CONFIG_FB_PM3 is not set
+# CONFIG_FB_CARMINE is not set
 # CONFIG_FB_FSL_DIU is not set
 CONFIG_FB_SM501=m
 CONFIG_FB_IBM_GXT4500=y
 # CONFIG_FB_VIRTUAL is not set
 CONFIG_BACKLIGHT_LCD_SUPPORT=y
 CONFIG_LCD_CLASS_DEVICE=m
+# CONFIG_LCD_ILI9320 is not set
+CONFIG_LCD_PLATFORM=m
 CONFIG_BACKLIGHT_CLASS_DEVICE=y
 # CONFIG_BACKLIGHT_CORGI is not set
 
@@ -2613,6 +2619,7 @@ CONFIG_USB_DEVICEFS=y
 # CONFIG_USB_DYNAMIC_MINORS is not set
 CONFIG_USB_SUSPEND=y
 # CONFIG_USB_OTG is not set
+CONFIG_USB_MON=y
 
 #
 # USB Host Controller Drivers
@@ -2640,6 +2647,7 @@ CONFIG_USB_U132_HCD=m
 CONFIG_USB_SL811_HCD=m
 # CONFIG_USB_SL811_CS is not set
 # CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_MUSB_HDRC is not set
 
 #
 # USB Device Class drivers
@@ -2668,6 +2676,7 @@ CONFIG_USB_STORAGE_JUMPSHOT=y
 CONFIG_USB_STORAGE_ALAUDA=y
 CONFIG_USB_STORAGE_ONETOUCH=y
 CONFIG_USB_STORAGE_KARMA=y
+# CONFIG_USB_STORAGE_SIERRA is not set
 CONFIG_USB_STORAGE_CYPRESS_ATACB=y
 # CONFIG_USB_LIBUSUAL is not set
 
@@ -2676,7 +2685,6 @@ CONFIG_USB_STORAGE_CYPRESS_ATACB=y
 #
 CONFIG_USB_MDC800=m
 CONFIG_USB_MICROTEK=m
-CONFIG_USB_MON=y
 
 #
 # USB port drivers
@@ -2686,7 +2694,6 @@ CONFIG_USB_SERIAL=m
 CONFIG_USB_EZUSB=y
 CONFIG_USB_SERIAL_GENERIC=y
 CONFIG_USB_SERIAL_AIRCABLE=m
-CONFIG_USB_SERIAL_AIRPRIME=m
 CONFIG_USB_SERIAL_ARK3116=m
 CONFIG_USB_SERIAL_BELKIN=m
 CONFIG_USB_SERIAL_CH341=m
@@ -2734,7 +2741,6 @@ CONFIG_USB_SERIAL_DEBUG=m
 CONFIG_USB_EMI62=m
 CONFIG_USB_EMI26=m
 CONFIG_USB_ADUTUX=m
-CONFIG_USB_AUERSWALD=m
 # CONFIG_USB_RIO500 is not set
 CONFIG_USB_LEGOTOWER=m
 CONFIG_USB_LCD=m
@@ -2770,7 +2776,9 @@ CONFIG_LEDS_CLASS=y
 #
 # LED drivers
 #
+# CONFIG_LEDS_PCA9532 is not set
 # CONFIG_LEDS_GPIO is not set
+# CONFIG_LEDS_PCA955X is not set
 
 #
 # LED Triggers
@@ -2853,6 +2861,7 @@ CONFIG_KS0108_PORT=0x378
 CONFIG_KS0108_DELAY=2
 CONFIG_UIO=m
 CONFIG_UIO_CIF=m
+CONFIG_UIO_PDRV=m
 CONFIG_UIO_SMX=m
 
 #
@@ -2899,6 +2908,7 @@ CONFIG_GFS2_FS_LOCKING_DLM=m
 CONFIG_OCFS2_FS=m
 CONFIG_OCFS2_FS_O2CB=m
 CONFIG_OCFS2_FS_USERSPACE_CLUSTER=m
+CONFIG_OCFS2_FS_STATS=y
 # CONFIG_OCFS2_DEBUG_MASKLOG is not set
 # CONFIG_OCFS2_DEBUG_FS is not set
 CONFIG_DNOTIFY=y
@@ -2959,11 +2969,9 @@ CONFIG_BEFS_FS=m
 CONFIG_BFS_FS=m
 CONFIG_EFS_FS=m
 CONFIG_CRAMFS=m
-CONFIG_SQUASHFS=m
-# CONFIG_SQUASHFS_EMBEDDED is not set
-CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
 CONFIG_VXFS_FS=m
 CONFIG_MINIX_FS=m
+CONFIG_OMFS_FS=m
 # CONFIG_HPFS_FS is not set
 CONFIG_QNX4FS_FS=m
 CONFIG_ROMFS_FS=m
@@ -2988,7 +2996,6 @@ CONFIG_NFS_ACL_SUPPORT=m
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=m
 CONFIG_SUNRPC_GSS=m
-CONFIG_SUNRPC_BIND34=y
 CONFIG_RPCSEC_GSS_KRB5=m
 CONFIG_RPCSEC_GSS_SPKM3=m
 # CONFIG_SMB_FS is not set
@@ -3011,7 +3018,6 @@ CONFIG_NCPFS_SMALLDOS=y
 CONFIG_NCPFS_NLS=y
 CONFIG_NCPFS_EXTRAS=y
 CONFIG_CODA_FS=m
-# CONFIG_CODA_FS_OLD_API is not set
 # CONFIG_AFS_FS is not set
 CONFIG_9P_FS=m
 
@@ -3087,7 +3093,7 @@ CONFIG_BITREVERSE=y
 # CONFIG_GENERIC_FIND_FIRST_BIT is not set
 CONFIG_CRC_CCITT=m
 CONFIG_CRC16=m
-CONFIG_CRC_T10DIF=m
+CONFIG_CRC_T10DIF=y
 CONFIG_CRC_ITU_T=m
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
@@ -3120,6 +3126,8 @@ CONFIG_HEADERS_CHECK=y
 CONFIG_DEBUG_KERNEL=y
 CONFIG_DEBUG_SHIRQ=y
 CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
 CONFIG_SCHED_DEBUG=y
 CONFIG_SCHEDSTATS=y
 CONFIG_TIMER_STATS=y
@@ -3143,6 +3151,7 @@ CONFIG_DEBUG_BUGVERBOSE=y
 CONFIG_DEBUG_INFO=y
 CONFIG_DEBUG_VM=y
 CONFIG_DEBUG_WRITECOUNT=y
+CONFIG_DEBUG_MEMORY_INIT=y
 CONFIG_DEBUG_LIST=y
 CONFIG_DEBUG_SG=y
 CONFIG_FRAME_POINTER=y
@@ -3158,6 +3167,7 @@ CONFIG_FAIL_MAKE_REQUEST=y
 CONFIG_FAULT_INJECTION_DEBUG_FS=y
 CONFIG_FAULT_INJECTION_STACKTRACE_FILTER=y
 CONFIG_LATENCYTOP=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_HAVE_FTRACE=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_TRACER_MAX_TRACE=y
@@ -3168,16 +3178,18 @@ CONFIG_CONTEXT_SWITCH_TRACER=y
 CONFIG_DYNAMIC_FTRACE=y
 # CONFIG_FTRACE_STARTUP_TEST is not set
 # CONFIG_FIREWIRE_OHCI_REMOTE_DMA is not set
+# CONFIG_BUILD_DOCSRC is not set
 # CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
 CONFIG_DEBUG_STACKOVERFLOW=y
 CONFIG_DEBUG_STACK_USAGE=y
-CONFIG_DEBUGGER=y
 # CONFIG_CODE_PATCHING_SELFTEST is not set
 # CONFIG_FTR_FIXUP_SELFTEST is not set
-# CONFIG_KGDB_CONSOLE is not set
 CONFIG_XMON=y
 # CONFIG_XMON_DEFAULT is not set
 CONFIG_XMON_DISASSEMBLY=y
+CONFIG_DEBUGGER=y
 CONFIG_IRQSTACKS=y
 # CONFIG_VIRQ_DEBUG is not set
 # CONFIG_BDI_SWITCH is not set
diff --git a/arch/powerpc/configs/pq2fads_defconfig b/arch/powerpc/configs/pq2fads_defconfig
index bc3bf62ddc2f..b390b7476649 100644
--- a/arch/powerpc/configs/pq2fads_defconfig
+++ b/arch/powerpc/configs/pq2fads_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc5
-# Mon Jun  9 08:52:18 2008
+# Linux kernel version: 2.6.27-rc4
+# Thu Aug 21 00:52:13 2008
 #
 # CONFIG_PPC64 is not set
 
@@ -15,6 +15,7 @@ CONFIG_6xx=y
 # CONFIG_44x is not set
 # CONFIG_E200 is not set
 CONFIG_PPC_FPU=y
+# CONFIG_ALTIVEC is not set
 CONFIG_PPC_STD_MMU=y
 CONFIG_PPC_STD_MMU_32=y
 # CONFIG_PPC_MM_SLICES is not set
@@ -31,12 +32,14 @@ CONFIG_GENERIC_HARDIRQS=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_GENERIC_GPIO=y
 # CONFIG_ARCH_NO_VIRT_TO_BUS is not set
 CONFIG_PPC=y
 CONFIG_EARLY_PRINTK=y
@@ -45,11 +48,13 @@ CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
 CONFIG_ARCH_MAY_HAVE_PC_FDC=y
 CONFIG_PPC_OF=y
 CONFIG_OF=y
-# CONFIG_PPC_UDBG_16550 is not set
+CONFIG_PPC_UDBG_16550=y
 # CONFIG_GENERIC_TBSYNC is not set
 CONFIG_AUDIT_ARCH=y
 CONFIG_GENERIC_BUG=y
 CONFIG_DEFAULT_UIMAGE=y
+CONFIG_HIBERNATE_32=y
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
@@ -82,7 +87,6 @@ CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
@@ -90,6 +94,7 @@ CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
+CONFIG_PCSPKR_PLATFORM=y
 CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
@@ -107,10 +112,16 @@ CONFIG_SLUB=y
 # CONFIG_PROFILING is not set
 # CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
+CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
 # CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+CONFIG_HAVE_CLK=y
 CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
@@ -120,6 +131,7 @@ CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -138,33 +150,43 @@ CONFIG_CLASSIC_RCU=y
 #
 # Platform support
 #
-# CONFIG_PPC_MULTIPLATFORM is not set
-CONFIG_PPC_82xx=y
-# CONFIG_PPC_83xx is not set
-# CONFIG_PPC_86xx is not set
-# CONFIG_PPC_MPC512x is not set
-# CONFIG_PPC_MPC5121 is not set
+CONFIG_PPC_MULTIPLATFORM=y
+CONFIG_CLASSIC32=y
+CONFIG_PPC_CHRP=y
+# CONFIG_MPC5121_ADS is not set
+# CONFIG_MPC5121_GENERIC is not set
+# CONFIG_PPC_MPC52xx is not set
+CONFIG_PPC_PMAC=y
 # CONFIG_PPC_CELL is not set
 # CONFIG_PPC_CELL_NATIVE is not set
+CONFIG_PPC_82xx=y
 # CONFIG_MPC8272_ADS is not set
 CONFIG_PQ2FADS=y
 # CONFIG_EP8248E is not set
 CONFIG_PQ2ADS=y
 CONFIG_8260=y
 CONFIG_PQ2_ADS_PCI_PIC=y
+# CONFIG_PPC_83xx is not set
+# CONFIG_PPC_86xx is not set
+# CONFIG_EMBEDDED6xx is not set
+CONFIG_PPC_NATIVE=y
+# CONFIG_UDBG_RTAS_CONSOLE is not set
 # CONFIG_IPIC is not set
-# CONFIG_MPIC is not set
+CONFIG_MPIC=y
 # CONFIG_MPIC_WEIRD is not set
-# CONFIG_PPC_I8259 is not set
-# CONFIG_PPC_RTAS is not set
+CONFIG_PPC_I8259=y
+CONFIG_PPC_RTAS=y
+# CONFIG_RTAS_ERROR_LOGGING is not set
+CONFIG_RTAS_PROC=y
 # CONFIG_MMIO_NVRAM is not set
-# CONFIG_PPC_MPC106 is not set
+CONFIG_PPC_MPC106=y
 # CONFIG_PPC_970_NAP is not set
 # CONFIG_PPC_INDIRECT_IO is not set
 # CONFIG_GENERIC_IOMAP is not set
 # CONFIG_CPU_FREQ is not set
+# CONFIG_PPC601_SYNC_FIX is not set
+# CONFIG_TAU is not set
 CONFIG_CPM2=y
-CONFIG_PPC_CPM_NEW_BINDING=y
 # CONFIG_FSL_ULI1575 is not set
 CONFIG_CPM=y
 
@@ -181,7 +203,7 @@ CONFIG_HZ_250=y
 # CONFIG_HZ_300 is not set
 # CONFIG_HZ_1000 is not set
 CONFIG_HZ=250
-# CONFIG_SCHED_HRTICK is not set
+CONFIG_SCHED_HRTICK=y
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
@@ -199,6 +221,7 @@ CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_MIGRATION=y
 # CONFIG_RESOURCES_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
@@ -206,6 +229,7 @@ CONFIG_VIRT_TO_BUS=y
 CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
+CONFIG_EXTRA_TARGETS=""
 # CONFIG_PM is not set
 CONFIG_SECCOMP=y
 CONFIG_ISA_DMA_API=y
@@ -213,9 +237,11 @@ CONFIG_ISA_DMA_API=y
 #
 # Bus options
 #
+# CONFIG_ISA is not set
 CONFIG_ZONE_DMA=y
 CONFIG_PPC_INDIRECT_PCI=y
 CONFIG_FSL_SOC=y
+CONFIG_PPC_PCI_CHOICE=y
 CONFIG_PCI=y
 CONFIG_PCI_DOMAINS=y
 CONFIG_PCI_SYSCALL=y
@@ -243,10 +269,6 @@ CONFIG_PAGE_OFFSET=0xc0000000
 CONFIG_KERNEL_START=0xc0000000
 CONFIG_PHYSICAL_START=0x00000000
 CONFIG_TASK_SIZE=0xc0000000
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -447,9 +469,11 @@ CONFIG_MTD_PHYSMAP_OF=y
 #
 # CONFIG_MTD_UBI is not set
 CONFIG_OF_DEVICE=y
+CONFIG_OF_GPIO=y
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_FD is not set
+# CONFIG_MAC_FLOPPY is not set
 # CONFIG_BLK_CPQ_DA is not set
 # CONFIG_BLK_CPQ_CISS_DA is not set
 # CONFIG_BLK_DEV_DAC960 is not set
@@ -461,14 +485,15 @@ CONFIG_BLK_DEV_LOOP=y
 # CONFIG_BLK_DEV_RAM is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_PHANTOM is not set
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_HP_ILO is not set
 CONFIG_HAVE_IDE=y
 CONFIG_IDE=y
-CONFIG_IDE_MAX_HWIFS=4
 CONFIG_BLK_DEV_IDE=y
 
 #
@@ -486,7 +511,6 @@ CONFIG_IDE_PROC_FS=y
 #
 # IDE chipset support/bugfixes
 #
-# CONFIG_IDE_GENERIC is not set
 # CONFIG_BLK_DEV_PLATFORM is not set
 
 #
@@ -498,9 +522,7 @@ CONFIG_IDE_PROC_FS=y
 # CONFIG_BLK_DEV_AMD74XX is not set
 # CONFIG_BLK_DEV_CMD64X is not set
 # CONFIG_BLK_DEV_TRIFLEX is not set
-# CONFIG_BLK_DEV_CY82C693 is not set
 # CONFIG_BLK_DEV_CS5530 is not set
-# CONFIG_BLK_DEV_HPT34X is not set
 # CONFIG_BLK_DEV_HPT366 is not set
 # CONFIG_BLK_DEV_JMICRON is not set
 # CONFIG_BLK_DEV_SC1200 is not set
@@ -517,9 +539,8 @@ CONFIG_IDE_PROC_FS=y
 # CONFIG_BLK_DEV_TRM290 is not set
 # CONFIG_BLK_DEV_VIA82CXXX is not set
 # CONFIG_BLK_DEV_TC86C001 is not set
+# CONFIG_BLK_DEV_IDE_PMAC is not set
 # CONFIG_BLK_DEV_IDEDMA is not set
-# CONFIG_BLK_DEV_HD_ONLY is not set
-# CONFIG_BLK_DEV_HD is not set
 
 #
 # SCSI device support
@@ -537,13 +558,12 @@ CONFIG_IDE_PROC_FS=y
 #
 
 #
-# An alternative FireWire stack is available with EXPERIMENTAL=y
+# A new alternative FireWire stack is available with EXPERIMENTAL=y
 #
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_EQUALIZER is not set
@@ -567,8 +587,11 @@ CONFIG_DAVICOM_PHY=y
 # CONFIG_REALTEK_PHY is not set
 # CONFIG_FIXED_PHY is not set
 CONFIG_MDIO_BITBANG=y
+# CONFIG_MDIO_OF_GPIO is not set
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
+# CONFIG_MACE is not set
+# CONFIG_BMAC is not set
 # CONFIG_HAPPYMEAL is not set
 # CONFIG_SUNGEM is not set
 # CONFIG_CASSINI is not set
@@ -590,7 +613,6 @@ CONFIG_NETDEV_1000=y
 # CONFIG_DL2K is not set
 # CONFIG_E1000 is not set
 # CONFIG_E1000E is not set
-# CONFIG_E1000E_ENABLED is not set
 # CONFIG_IGB is not set
 # CONFIG_NS83820 is not set
 # CONFIG_HAMACHI is not set
@@ -602,6 +624,7 @@ CONFIG_NETDEV_1000=y
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
 # CONFIG_GIANFAR is not set
+# CONFIG_MV643XX_ETH is not set
 # CONFIG_QLA3XXX is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
@@ -667,6 +690,7 @@ CONFIG_KEYBOARD_ATKBD=y
 # CONFIG_KEYBOARD_XTKBD is not set
 # CONFIG_KEYBOARD_NEWTON is not set
 # CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_GPIO is not set
 CONFIG_INPUT_MOUSE=y
 CONFIG_MOUSE_PS2=y
 CONFIG_MOUSE_PS2_ALPS=y
@@ -677,7 +701,9 @@ CONFIG_MOUSE_PS2_TRACKPOINT=y
 # CONFIG_MOUSE_PS2_TOUCHKIT is not set
 # CONFIG_MOUSE_SERIAL is not set
 # CONFIG_MOUSE_APPLETOUCH is not set
+# CONFIG_MOUSE_BCM5974 is not set
 # CONFIG_MOUSE_VSXXXAA is not set
+# CONFIG_MOUSE_GPIO is not set
 # CONFIG_INPUT_JOYSTICK is not set
 # CONFIG_INPUT_TABLET is not set
 # CONFIG_INPUT_TOUCHSCREEN is not set
@@ -692,6 +718,7 @@ CONFIG_SERIO_SERPORT=y
 # CONFIG_SERIO_PCIPS2 is not set
 CONFIG_SERIO_LIBPS2=y
 # CONFIG_SERIO_RAW is not set
+# CONFIG_SERIO_XILINX_XPS_PS2 is not set
 # CONFIG_GAMEPORT is not set
 
 #
@@ -712,6 +739,7 @@ CONFIG_DEVKMEM=y
 # CONFIG_SERIAL_UARTLITE is not set
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_PMACZILOG is not set
 CONFIG_SERIAL_CPM=y
 CONFIG_SERIAL_CPM_CONSOLE=y
 CONFIG_SERIAL_CPM_SCC1=y
@@ -724,6 +752,8 @@ CONFIG_SERIAL_CPM_SCC4=y
 CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_BRIQ_PANEL is not set
+# CONFIG_HVC_RTAS is not set
 # CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
 # CONFIG_NVRAM is not set
@@ -734,10 +764,28 @@ CONFIG_HW_RANDOM=y
 CONFIG_DEVPORT=y
 # CONFIG_I2C is not set
 # CONFIG_SPI is not set
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+
+#
+# I2C GPIO expanders:
+#
+
+#
+# PCI GPIO expanders:
+#
+# CONFIG_GPIO_BT8XX is not set
+
+#
+# SPI GPIO expanders:
+#
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 # CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
 
 #
@@ -749,8 +797,10 @@ CONFIG_SSB_POSSIBLE=y
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
 
 #
 # Multimedia devices
@@ -782,10 +832,6 @@ CONFIG_VIDEO_OUTPUT_CONTROL=y
 # Display device support
 #
 # CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Sound
-#
 # CONFIG_SOUND is not set
 # CONFIG_HID_SUPPORT is not set
 CONFIG_USB_SUPPORT=y
@@ -795,6 +841,8 @@ CONFIG_USB_ARCH_HAS_EHCI=y
 # CONFIG_USB is not set
 # CONFIG_USB_OTG_WHITELIST is not set
 # CONFIG_USB_OTG_BLACKLIST_HUB is not set
+# CONFIG_USB_MUSB_HDRC is not set
+# CONFIG_USB_GADGET_MUSB_HDRC is not set
 
 #
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
@@ -807,7 +855,7 @@ CONFIG_USB_GADGET_SELECTED=y
 # CONFIG_USB_GADGET_ATMEL_USBA is not set
 # CONFIG_USB_GADGET_FSL_USB2 is not set
 # CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_PXA2XX is not set
+# CONFIG_USB_GADGET_PXA25X is not set
 CONFIG_USB_GADGET_M66592=y
 CONFIG_USB_M66592=y
 # CONFIG_USB_GADGET_PXA27X is not set
@@ -826,6 +874,7 @@ CONFIG_USB_ETH_RNDIS=y
 # CONFIG_USB_G_SERIAL is not set
 # CONFIG_USB_MIDI_GADGET is not set
 # CONFIG_USB_G_PRINTER is not set
+# CONFIG_USB_CDC_COMPOSITE is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
@@ -893,6 +942,7 @@ CONFIG_TMPFS=y
 CONFIG_CRAMFS=y
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
 # CONFIG_ROMFS_FS is not set
@@ -902,8 +952,8 @@ CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 CONFIG_NFS_V3_ACL=y
-# CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_NFS_ACL_SUPPORT=y
@@ -983,6 +1033,7 @@ CONFIG_BITREVERSE=y
 # CONFIG_GENERIC_FIND_FIRST_BIT is not set
 CONFIG_CRC_CCITT=y
 # CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
 # CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
@@ -1009,6 +1060,8 @@ CONFIG_MAGIC_SYSRQ=y
 CONFIG_DEBUG_KERNEL=y
 # CONFIG_DEBUG_SHIRQ is not set
 CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
 # CONFIG_SCHED_DEBUG is not set
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
@@ -1026,19 +1079,31 @@ CONFIG_DEBUG_BUGVERBOSE=y
 CONFIG_DEBUG_INFO=y
 # CONFIG_DEBUG_VM is not set
 # CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+# CONFIG_FTRACE is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
 # CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
 # CONFIG_DEBUG_PAGEALLOC is not set
-# CONFIG_DEBUGGER is not set
-# CONFIG_KGDB_CONSOLE is not set
+# CONFIG_CODE_PATCHING_SELFTEST is not set
+# CONFIG_FTR_FIXUP_SELFTEST is not set
+# CONFIG_XMON is not set
 # CONFIG_IRQSTACKS is not set
 CONFIG_BDI_SWITCH=y
+# CONFIG_BOOTX_TEXT is not set
 # CONFIG_PPC_EARLY_DEBUG is not set
 
 #
@@ -1046,6 +1111,7 @@ CONFIG_BDI_SWITCH=y
 #
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
 CONFIG_CRYPTO=y
 
 #
@@ -1086,6 +1152,10 @@ CONFIG_CRYPTO_PCBC=y
 # CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=y
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
 # CONFIG_CRYPTO_SHA1 is not set
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
@@ -1117,6 +1187,7 @@ CONFIG_CRYPTO_DES=y
 # CONFIG_CRYPTO_LZO is not set
 CONFIG_CRYPTO_HW=y
 # CONFIG_CRYPTO_DEV_HIFN_795X is not set
-# CONFIG_PPC_CLOCK is not set
+# CONFIG_CRYPTO_DEV_TALITOS is not set
+CONFIG_PPC_CLOCK=y
 CONFIG_PPC_LIB_RHEAP=y
 # CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/prpmc2800_defconfig b/arch/powerpc/configs/prpmc2800_defconfig
index c6b83577c055..01b54eac1ff6 100644
--- a/arch/powerpc/configs/prpmc2800_defconfig
+++ b/arch/powerpc/configs/prpmc2800_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc5
-# Mon Jun  9 08:52:18 2008
+# Linux kernel version: 2.6.27-rc4
+# Thu Aug 21 00:52:14 2008
 #
 # CONFIG_PPC64 is not set
 
@@ -34,6 +34,7 @@ CONFIG_GENERIC_HARDIRQS=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
@@ -94,7 +95,6 @@ CONFIG_INITRAMFS_SOURCE=""
 CONFIG_SYSCTL=y
 # CONFIG_EMBEDDED is not set
 CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
 CONFIG_HOTPLUG=y
@@ -118,10 +118,16 @@ CONFIG_SLUB=y
 # CONFIG_PROFILING is not set
 # CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
+CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
 # CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+# CONFIG_HAVE_CLK is not set
 CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
@@ -132,6 +138,7 @@ CONFIG_LBD=y
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -151,25 +158,25 @@ CONFIG_CLASSIC_RCU=y
 # Platform support
 #
 CONFIG_PPC_MULTIPLATFORM=y
-# CONFIG_PPC_82xx is not set
-# CONFIG_PPC_83xx is not set
-# CONFIG_PPC_86xx is not set
 CONFIG_CLASSIC32=y
 # CONFIG_PPC_CHRP is not set
-# CONFIG_PPC_MPC512x is not set
-# CONFIG_PPC_MPC5121 is not set
 # CONFIG_MPC5121_ADS is not set
+# CONFIG_MPC5121_GENERIC is not set
 # CONFIG_PPC_MPC52xx is not set
 # CONFIG_PPC_PMAC is not set
 # CONFIG_PPC_CELL is not set
 # CONFIG_PPC_CELL_NATIVE is not set
+# CONFIG_PPC_82xx is not set
 # CONFIG_PQ2ADS is not set
+# CONFIG_PPC_83xx is not set
+# CONFIG_PPC_86xx is not set
 CONFIG_EMBEDDED6xx=y
 # CONFIG_LINKSTATION is not set
 # CONFIG_STORCENTER is not set
 # CONFIG_MPC7448HPC2 is not set
 # CONFIG_PPC_HOLLY is not set
 CONFIG_PPC_PRPMC2800=y
+# CONFIG_PPC_C2K is not set
 CONFIG_MV64X60=y
 # CONFIG_IPIC is not set
 # CONFIG_MPIC is not set
@@ -198,7 +205,7 @@ CONFIG_HZ_250=y
 # CONFIG_HZ_300 is not set
 # CONFIG_HZ_1000 is not set
 CONFIG_HZ=250
-# CONFIG_SCHED_HRTICK is not set
+CONFIG_SCHED_HRTICK=y
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
@@ -221,6 +228,7 @@ CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_MIGRATION=y
 # CONFIG_RESOURCES_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
@@ -228,6 +236,7 @@ CONFIG_VIRT_TO_BUS=y
 CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
+CONFIG_EXTRA_TARGETS=""
 # CONFIG_PM is not set
 # CONFIG_SECCOMP is not set
 CONFIG_ISA_DMA_API=y
@@ -264,10 +273,6 @@ CONFIG_PHYSICAL_START=0x00000000
 CONFIG_TASK_SIZE=0xc0000000
 CONFIG_CONSISTENT_START=0xff100000
 CONFIG_CONSISTENT_SIZE=0x00200000
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -359,7 +364,9 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
+CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_SYS_HYPERVISOR is not set
 # CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
@@ -461,12 +468,14 @@ CONFIG_BLK_DEV_RAM_SIZE=131072
 # CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_PHANTOM is not set
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_HP_ILO is not set
 CONFIG_HAVE_IDE=y
 CONFIG_IDE=y
 CONFIG_BLK_DEV_IDE=y
@@ -487,7 +496,6 @@ CONFIG_IDE_PROC_FS=y
 #
 # IDE chipset support/bugfixes
 #
-CONFIG_IDE_GENERIC=y
 # CONFIG_BLK_DEV_PLATFORM is not set
 CONFIG_BLK_DEV_IDEDMA_SFF=y
 
@@ -505,10 +513,8 @@ CONFIG_BLK_DEV_IDEDMA_PCI=y
 # CONFIG_BLK_DEV_AMD74XX is not set
 # CONFIG_BLK_DEV_CMD64X is not set
 # CONFIG_BLK_DEV_TRIFLEX is not set
-# CONFIG_BLK_DEV_CY82C693 is not set
 # CONFIG_BLK_DEV_CS5520 is not set
 # CONFIG_BLK_DEV_CS5530 is not set
-# CONFIG_BLK_DEV_HPT34X is not set
 # CONFIG_BLK_DEV_HPT366 is not set
 # CONFIG_BLK_DEV_JMICRON is not set
 # CONFIG_BLK_DEV_SC1200 is not set
@@ -526,8 +532,6 @@ CONFIG_BLK_DEV_PDC202XX_NEW=y
 # CONFIG_BLK_DEV_VIA82CXXX is not set
 # CONFIG_BLK_DEV_TC86C001 is not set
 CONFIG_BLK_DEV_IDEDMA=y
-# CONFIG_BLK_DEV_HD_ONLY is not set
-# CONFIG_BLK_DEV_HD is not set
 
 #
 # SCSI device support
@@ -603,6 +607,7 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_NSP32 is not set
 # CONFIG_SCSI_DEBUG is not set
 # CONFIG_SCSI_SRP is not set
+# CONFIG_SCSI_DH is not set
 CONFIG_ATA=y
 # CONFIG_ATA_NONSTANDARD is not set
 CONFIG_SATA_PMP=y
@@ -669,6 +674,10 @@ CONFIG_SATA_MV=y
 #
 # IEEE 1394 (FireWire) support
 #
+
+#
+# Enable only one of the two stacks, unless you know what you are doing
+#
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
@@ -676,7 +685,6 @@ CONFIG_MACINTOSH_DRIVERS=y
 # CONFIG_MAC_EMUMOUSEBTN is not set
 # CONFIG_WINDFARM is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -741,10 +749,8 @@ CONFIG_NETDEV_1000=y
 # CONFIG_ACENIC is not set
 # CONFIG_DL2K is not set
 CONFIG_E1000=y
-# CONFIG_E1000_NAPI is not set
 # CONFIG_E1000_DISABLE_PACKET_SPLIT is not set
 # CONFIG_E1000E is not set
-# CONFIG_E1000E_ENABLED is not set
 # CONFIG_IP1000 is not set
 # CONFIG_IGB is not set
 # CONFIG_NS83820 is not set
@@ -760,6 +766,7 @@ CONFIG_E1000=y
 CONFIG_MV643XX_ETH=y
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
+# CONFIG_ATL1E is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
 # CONFIG_CHELSIO_T3 is not set
@@ -840,6 +847,7 @@ CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
 # Character devices
 #
 CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
 # CONFIG_VT_HW_CONSOLE_BINDING is not set
@@ -875,43 +883,64 @@ CONFIG_DEVPORT=y
 CONFIG_I2C=y
 CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
 
 #
 # I2C Hardware Bus support
 #
+
+#
+# PC SMBus host controller drivers
+#
 # CONFIG_I2C_ALI1535 is not set
 # CONFIG_I2C_ALI1563 is not set
 # CONFIG_I2C_ALI15X3 is not set
 # CONFIG_I2C_AMD756 is not set
 # CONFIG_I2C_AMD8111 is not set
 # CONFIG_I2C_I801 is not set
-# CONFIG_I2C_I810 is not set
+# CONFIG_I2C_ISCH is not set
 # CONFIG_I2C_PIIX4 is not set
-# CONFIG_I2C_MPC is not set
 # CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_PROSAVAGE is not set
-# CONFIG_I2C_SAVAGE4 is not set
-# CONFIG_I2C_SIMTEC is not set
 # CONFIG_I2C_SIS5595 is not set
 # CONFIG_I2C_SIS630 is not set
 # CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_TINY_USB is not set
 # CONFIG_I2C_VIA is not set
 # CONFIG_I2C_VIAPRO is not set
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+# CONFIG_I2C_MPC is not set
+CONFIG_I2C_MV64XXX=y
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Graphics adapter I2C/DDC channel drivers
+#
 # CONFIG_I2C_VOODOO3 is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
 # CONFIG_I2C_PCA_PLATFORM is not set
-CONFIG_I2C_MV64XXX=y
 
 #
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
+# CONFIG_AT24 is not set
 # CONFIG_SENSORS_EEPROM is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
@@ -920,10 +949,13 @@ CONFIG_I2C_MV64XXX=y
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
 # CONFIG_SPI is not set
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+# CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 CONFIG_HWMON=y
 # CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_AD7414 is not set
 # CONFIG_SENSORS_AD7418 is not set
 # CONFIG_SENSORS_ADM1021 is not set
 # CONFIG_SENSORS_ADM1025 is not set
@@ -977,6 +1009,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_W83627EHF is not set
 # CONFIG_HWMON_DEBUG_CHIP is not set
 # CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
 
 #
@@ -988,8 +1021,10 @@ CONFIG_SSB_POSSIBLE=y
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
 
 #
 # Multimedia devices
@@ -1028,10 +1063,6 @@ CONFIG_VIDEO_OUTPUT_CONTROL=y
 CONFIG_VGA_CONSOLE=y
 # CONFIG_VGACON_SOFT_SCROLLBACK is not set
 CONFIG_DUMMY_CONSOLE=y
-
-#
-# Sound
-#
 # CONFIG_SOUND is not set
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
@@ -1060,6 +1091,7 @@ CONFIG_USB_DEVICEFS=y
 # CONFIG_USB_DEVICE_CLASS is not set
 # CONFIG_USB_DYNAMIC_MINORS is not set
 # CONFIG_USB_OTG is not set
+CONFIG_USB_MON=y
 
 #
 # USB Host Controller Drivers
@@ -1102,7 +1134,6 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y
 #
 # CONFIG_USB_MDC800 is not set
 # CONFIG_USB_MICROTEK is not set
-CONFIG_USB_MON=y
 
 #
 # USB port drivers
@@ -1115,7 +1146,6 @@ CONFIG_USB_MON=y
 # CONFIG_USB_EMI62 is not set
 # CONFIG_USB_EMI26 is not set
 # CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_AUERSWALD is not set
 # CONFIG_USB_RIO500 is not set
 # CONFIG_USB_LEGOTOWER is not set
 # CONFIG_USB_LCD is not set
@@ -1169,6 +1199,7 @@ CONFIG_RTC_DRV_MAX6900=y
 # CONFIG_RTC_DRV_PCF8583 is not set
 # CONFIG_RTC_DRV_M41T80 is not set
 # CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
 
 #
 # SPI RTC drivers
@@ -1258,6 +1289,7 @@ CONFIG_TMPFS=y
 # CONFIG_CRAMFS is not set
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
 # CONFIG_ROMFS_FS is not set
@@ -1267,12 +1299,11 @@ CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 # CONFIG_NFS_V3 is not set
 # CONFIG_NFS_V4 is not set
-# CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
 CONFIG_LOCKD=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -1312,6 +1343,7 @@ CONFIG_BITREVERSE=y
 # CONFIG_GENERIC_FIND_FIRST_BIT is not set
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
+CONFIG_CRC_T10DIF=y
 # CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
@@ -1337,7 +1369,16 @@ CONFIG_FRAME_WARN=1024
 # CONFIG_SLUB_DEBUG_ON is not set
 # CONFIG_SLUB_STATS is not set
 CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_MEMORY_INIT=y
+# CONFIG_LATENCYTOP is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+# CONFIG_FTRACE is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
 # CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_IRQSTACKS is not set
 # CONFIG_BOOTX_TEXT is not set
 # CONFIG_PPC_EARLY_DEBUG is not set
@@ -1390,6 +1431,10 @@ CONFIG_CRYPTO=y
 # CONFIG_CRYPTO_MD4 is not set
 # CONFIG_CRYPTO_MD5 is not set
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
 # CONFIG_CRYPTO_SHA1 is not set
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
diff --git a/arch/powerpc/configs/ps3_defconfig b/arch/powerpc/configs/ps3_defconfig
index f9a3d3b394cf..b6eee7c93cdd 100644
--- a/arch/powerpc/configs/ps3_defconfig
+++ b/arch/powerpc/configs/ps3_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26
-# Wed Jul 16 13:59:24 2008
+# Linux kernel version: 2.6.27-rc3
+# Wed Aug 20 08:16:53 2008
 #
 CONFIG_PPC64=y
 
@@ -92,7 +92,6 @@ CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 CONFIG_SYSCTL=y
 # CONFIG_EMBEDDED is not set
 CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
 CONFIG_KALLSYMS_EXTRA_PASS=y
@@ -118,11 +117,16 @@ CONFIG_PROFILING=y
 CONFIG_OPROFILE=m
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
+CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_HAVE_DMA_ATTRS=y
 CONFIG_USE_GENERIC_SMP_HELPERS=y
+# CONFIG_HAVE_CLK is not set
 CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
@@ -179,6 +183,7 @@ CONFIG_PS3_STORAGE=y
 CONFIG_PS3_DISK=y
 CONFIG_PS3_ROM=y
 CONFIG_PS3_FLASH=y
+CONFIG_OPROFILE_PS3=y
 CONFIG_PS3_LPM=m
 CONFIG_PPC_CELL=y
 # CONFIG_PPC_CELL_NATIVE is not set
@@ -218,7 +223,7 @@ CONFIG_HZ_250=y
 # CONFIG_HZ_300 is not set
 # CONFIG_HZ_1000 is not set
 CONFIG_HZ=250
-# CONFIG_SCHED_HRTICK is not set
+CONFIG_SCHED_HRTICK=y
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
@@ -252,8 +257,10 @@ CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
 # CONFIG_SPARSEMEM_VMEMMAP is not set
 CONFIG_MEMORY_HOTPLUG=y
 CONFIG_MEMORY_HOTPLUG_SPARSE=y
+# CONFIG_MEMORY_HOTREMOVE is not set
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_MIGRATION=y
 CONFIG_RESOURCES_64BIT=y
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
@@ -276,19 +283,17 @@ CONFIG_ISA_DMA_API=y
 #
 CONFIG_ZONE_DMA=y
 CONFIG_GENERIC_ISA_DMA=y
+CONFIG_PPC_PCI_CHOICE=y
 # CONFIG_PCI is not set
 # CONFIG_PCI_DOMAINS is not set
 # CONFIG_PCI_SYSCALL is not set
 # CONFIG_ARCH_SUPPORTS_MSI is not set
 # CONFIG_PCCARD is not set
 # CONFIG_HAS_RAPIDIO is not set
+# CONFIG_RELOCATABLE is not set
 CONFIG_PAGE_OFFSET=0xc000000000000000
 CONFIG_KERNEL_START=0xc000000000000000
 CONFIG_PHYSICAL_START=0x00000000
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -399,9 +404,22 @@ CONFIG_BT_HCIUSB_SCO=y
 #
 # Wireless
 #
-# CONFIG_CFG80211 is not set
+CONFIG_CFG80211=m
+CONFIG_NL80211=y
 CONFIG_WIRELESS_EXT=y
-# CONFIG_MAC80211 is not set
+# CONFIG_WIRELESS_EXT_SYSFS is not set
+CONFIG_MAC80211=m
+
+#
+# Rate control algorithm selection
+#
+CONFIG_MAC80211_RC_PID=y
+CONFIG_MAC80211_RC_DEFAULT_PID=y
+CONFIG_MAC80211_RC_DEFAULT="pid"
+# CONFIG_MAC80211_MESH is not set
+# CONFIG_MAC80211_LEDS is not set
+# CONFIG_MAC80211_DEBUGFS is not set
+# CONFIG_MAC80211_DEBUG_MENU is not set
 CONFIG_IEEE80211=m
 # CONFIG_IEEE80211_DEBUG is not set
 CONFIG_IEEE80211_CRYPT_WEP=m
@@ -420,14 +438,79 @@ CONFIG_IEEE80211_CRYPT_TKIP=m
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=m
+CONFIG_FW_LOADER=y
 # CONFIG_FIRMWARE_IN_KERNEL is not set
 CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_DEBUG_DRIVER is not set
 # CONFIG_DEBUG_DEVRES is not set
 # CONFIG_SYS_HYPERVISOR is not set
 # CONFIG_CONNECTOR is not set
-# CONFIG_MTD is not set
+CONFIG_MTD=y
+CONFIG_MTD_DEBUG=y
+CONFIG_MTD_DEBUG_VERBOSE=0
+# CONFIG_MTD_CONCAT is not set
+# CONFIG_MTD_PARTITIONS is not set
+
+#
+# User Modules And Translation Layers
+#
+# CONFIG_MTD_CHAR is not set
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+# CONFIG_MTD_CFI is not set
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+CONFIG_MTD_PS3VRAM=y
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+# CONFIG_MTD_NAND is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
 CONFIG_OF_DEVICE=y
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
@@ -443,6 +526,7 @@ CONFIG_BLK_DEV_RAM_SIZE=65535
 # CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
@@ -494,7 +578,6 @@ CONFIG_SCSI_WAIT_SCAN=m
 # CONFIG_MD is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -510,9 +593,9 @@ CONFIG_MII=m
 # CONFIG_IBM_NEW_EMAC_EMAC4 is not set
 # CONFIG_B44 is not set
 CONFIG_NETDEV_1000=y
-# CONFIG_E1000E_ENABLED is not set
 CONFIG_GELIC_NET=y
 CONFIG_GELIC_WIRELESS=y
+CONFIG_GELIC_WIRELESS_OLD_PSK_INTERFACE=y
 # CONFIG_NETDEV_10000 is not set
 
 #
@@ -523,8 +606,22 @@ CONFIG_WLAN_80211=y
 # CONFIG_LIBERTAS is not set
 # CONFIG_USB_ZD1201 is not set
 # CONFIG_USB_NET_RNDIS_WLAN is not set
+# CONFIG_RTL8187 is not set
+# CONFIG_MAC80211_HWSIM is not set
+# CONFIG_P54_COMMON is not set
 # CONFIG_IWLWIFI_LEDS is not set
 # CONFIG_HOSTAP is not set
+# CONFIG_B43 is not set
+# CONFIG_B43LEGACY is not set
+CONFIG_ZD1211RW=m
+# CONFIG_ZD1211RW_DEBUG is not set
+CONFIG_RT2X00=m
+CONFIG_RT2X00_LIB=m
+CONFIG_RT2X00_LIB_USB=m
+CONFIG_RT2X00_LIB_FIRMWARE=y
+# CONFIG_RT2500USB is not set
+CONFIG_RT73USB=m
+# CONFIG_RT2X00_DEBUG is not set
 
 #
 # USB Network Adapters
@@ -622,6 +719,7 @@ CONFIG_INPUT_JOYSTICK=y
 # Character devices
 #
 CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
 CONFIG_VT_HW_CONSOLE_BINDING=y
@@ -647,6 +745,8 @@ CONFIG_LEGACY_PTY_COUNT=16
 # CONFIG_TCG_TPM is not set
 # CONFIG_I2C is not set
 # CONFIG_SPI is not set
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+# CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
@@ -663,8 +763,10 @@ CONFIG_SSB_POSSIBLE=y
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
 
 #
 # Multimedia devices
@@ -796,6 +898,7 @@ CONFIG_USB_DEVICEFS=y
 # CONFIG_USB_DYNAMIC_MINORS is not set
 CONFIG_USB_SUSPEND=y
 # CONFIG_USB_OTG is not set
+CONFIG_USB_MON=y
 
 #
 # USB Host Controller Drivers
@@ -817,6 +920,10 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y
 # CONFIG_USB_R8A66597_HCD is not set
 
 #
+# Enable Host or Gadget support to see Inventra options
+#
+
+#
 # USB Device Class drivers
 #
 # CONFIG_USB_ACM is not set
@@ -843,6 +950,7 @@ CONFIG_USB_STORAGE=m
 # CONFIG_USB_STORAGE_ALAUDA is not set
 # CONFIG_USB_STORAGE_ONETOUCH is not set
 # CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_SIERRA is not set
 # CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
 # CONFIG_USB_LIBUSUAL is not set
 
@@ -851,7 +959,6 @@ CONFIG_USB_STORAGE=m
 #
 # CONFIG_USB_MDC800 is not set
 # CONFIG_USB_MICROTEK is not set
-CONFIG_USB_MON=y
 
 #
 # USB port drivers
@@ -864,7 +971,6 @@ CONFIG_USB_MON=y
 # CONFIG_USB_EMI62 is not set
 # CONFIG_USB_EMI26 is not set
 # CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_AUERSWALD is not set
 # CONFIG_USB_RIO500 is not set
 # CONFIG_USB_LEGOTOWER is not set
 # CONFIG_USB_LCD is not set
@@ -998,9 +1104,11 @@ CONFIG_HUGETLB_PAGE=y
 # CONFIG_BEFS_FS is not set
 # CONFIG_BFS_FS is not set
 # CONFIG_EFS_FS is not set
+# CONFIG_JFFS2_FS is not set
 # CONFIG_CRAMFS is not set
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
 # CONFIG_ROMFS_FS is not set
@@ -1011,14 +1119,13 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
-# CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_BIND34 is not set
 CONFIG_RPCSEC_GSS_KRB5=y
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -1086,7 +1193,7 @@ CONFIG_BITREVERSE=y
 # CONFIG_GENERIC_FIND_FIRST_BIT is not set
 CONFIG_CRC_CCITT=m
 # CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
+CONFIG_CRC_T10DIF=y
 CONFIG_CRC_ITU_T=m
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
@@ -1115,6 +1222,8 @@ CONFIG_DEBUG_FS=y
 CONFIG_DEBUG_KERNEL=y
 # CONFIG_DEBUG_SHIRQ is not set
 CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
 CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
@@ -1138,6 +1247,7 @@ CONFIG_DEBUG_BUGVERBOSE=y
 CONFIG_DEBUG_INFO=y
 # CONFIG_DEBUG_VM is not set
 CONFIG_DEBUG_WRITECOUNT=y
+CONFIG_DEBUG_MEMORY_INIT=y
 CONFIG_DEBUG_LIST=y
 # CONFIG_DEBUG_SG is not set
 CONFIG_FRAME_POINTER=y
@@ -1146,6 +1256,7 @@ CONFIG_FRAME_POINTER=y
 # CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_LATENCYTOP is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_HAVE_FTRACE=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 # CONFIG_FTRACE is not set
@@ -1153,12 +1264,14 @@ CONFIG_HAVE_DYNAMIC_FTRACE=y
 # CONFIG_SCHED_TRACER is not set
 # CONFIG_CONTEXT_SWITCH_TRACER is not set
 # CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
 CONFIG_DEBUG_STACKOVERFLOW=y
 # CONFIG_DEBUG_STACK_USAGE is not set
 # CONFIG_DEBUG_PAGEALLOC is not set
-# CONFIG_DEBUGGER is not set
 # CONFIG_CODE_PATCHING_SELFTEST is not set
 # CONFIG_FTR_FIXUP_SELFTEST is not set
+# CONFIG_XMON is not set
 CONFIG_IRQSTACKS=y
 # CONFIG_VIRQ_DEBUG is not set
 # CONFIG_BOOTX_TEXT is not set
diff --git a/arch/powerpc/configs/pseries_defconfig b/arch/powerpc/configs/pseries_defconfig
index fe6ffa683d78..e77c5e7a0be2 100644
--- a/arch/powerpc/configs/pseries_defconfig
+++ b/arch/powerpc/configs/pseries_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc3
-# Tue May 20 20:03:28 2008
+# Linux kernel version: 2.6.27-rc4
+# Tue Aug 26 13:31:07 2008
 #
 CONFIG_PPC64=y
 
@@ -14,6 +14,7 @@ CONFIG_POWER4=y
 # CONFIG_TUNE_CELL is not set
 CONFIG_PPC_FPU=y
 CONFIG_ALTIVEC=y
+CONFIG_VSX=y
 CONFIG_PPC_STD_MMU=y
 CONFIG_PPC_MM_SLICES=y
 CONFIG_VIRT_CPU_ACCOUNTING=y
@@ -31,6 +32,7 @@ CONFIG_GENERIC_HARDIRQS=y
 CONFIG_HAVE_SETUP_PER_CPU_AREA=y
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
 CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
@@ -104,7 +106,6 @@ CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 CONFIG_SYSCTL=y
 # CONFIG_EMBEDDED is not set
 CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
@@ -132,11 +133,17 @@ CONFIG_MARKERS=y
 CONFIG_OPROFILE=y
 CONFIG_HAVE_OPROFILE=y
 CONFIG_KPROBES=y
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
 CONFIG_KRETPROBES=y
+CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
-# CONFIG_HAVE_DMA_ATTRS is not set
+CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_HAVE_DMA_ATTRS=y
+CONFIG_USE_GENERIC_SMP_HELPERS=y
+# CONFIG_HAVE_CLK is not set
 CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
@@ -152,6 +159,7 @@ CONFIG_STOP_MACHINE=y
 CONFIG_BLOCK=y
 # CONFIG_BLK_DEV_IO_TRACE is not set
 CONFIG_BLK_DEV_BSG=y
+# CONFIG_BLK_DEV_INTEGRITY is not set
 CONFIG_BLOCK_COMPAT=y
 
 #
@@ -172,17 +180,14 @@ CONFIG_CLASSIC_RCU=y
 # Platform support
 #
 CONFIG_PPC_MULTIPLATFORM=y
-# CONFIG_PPC_82xx is not set
-# CONFIG_PPC_83xx is not set
-# CONFIG_PPC_86xx is not set
 CONFIG_PPC_PSERIES=y
 CONFIG_PPC_SPLPAR=y
 CONFIG_EEH=y
 CONFIG_SCANLOG=m
 CONFIG_LPARCFG=y
+CONFIG_PPC_SMLPAR=y
+CONFIG_CMM=y
 # CONFIG_PPC_ISERIES is not set
-# CONFIG_PPC_MPC512x is not set
-# CONFIG_PPC_MPC5121 is not set
 # CONFIG_PPC_PMAC is not set
 # CONFIG_PPC_MAPLE is not set
 # CONFIG_PPC_PASEMI is not set
@@ -226,7 +231,7 @@ CONFIG_HZ_250=y
 # CONFIG_HZ_300 is not set
 # CONFIG_HZ_1000 is not set
 CONFIG_HZ=250
-# CONFIG_SCHED_HRTICK is not set
+CONFIG_SCHED_HRTICK=y
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
@@ -275,6 +280,7 @@ CONFIG_FORCE_MAX_ZONEORDER=13
 CONFIG_SCHED_SMT=y
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
+CONFIG_EXTRA_TARGETS=""
 # CONFIG_PM is not set
 CONFIG_SECCOMP=y
 CONFIG_ISA_DMA_API=y
@@ -304,10 +310,6 @@ CONFIG_HOTPLUG_PCI_RPA_DLPAR=m
 CONFIG_PAGE_OFFSET=0xc000000000000000
 CONFIG_KERNEL_START=0xc000000000000000
 CONFIG_PHYSICAL_START=0x00000000
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -321,6 +323,7 @@ CONFIG_XFRM_USER=m
 # CONFIG_XFRM_SUB_POLICY is not set
 # CONFIG_XFRM_MIGRATE is not set
 # CONFIG_XFRM_STATISTICS is not set
+CONFIG_XFRM_IPCOMP=m
 CONFIG_NET_KEY=m
 # CONFIG_NET_KEY_MIGRATE is not set
 CONFIG_INET=y
@@ -498,6 +501,8 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_DEBUG_DRIVER is not set
 # CONFIG_DEBUG_DEVRES is not set
 # CONFIG_SYS_HYPERVISOR is not set
@@ -531,12 +536,14 @@ CONFIG_BLK_DEV_RAM_SIZE=65536
 # CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_PHANTOM is not set
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_HP_ILO is not set
 CONFIG_HAVE_IDE=y
 CONFIG_IDE=y
 CONFIG_BLK_DEV_IDE=y
@@ -544,6 +551,7 @@ CONFIG_BLK_DEV_IDE=y
 #
 # Please see Documentation/ide/ide.txt for help/info on IDE drives
 #
+CONFIG_IDE_TIMINGS=y
 # CONFIG_BLK_DEV_IDE_SATA is not set
 CONFIG_BLK_DEV_IDEDISK=y
 # CONFIG_IDEDISK_MULTI_MODE is not set
@@ -575,10 +583,8 @@ CONFIG_BLK_DEV_IDEDMA_PCI=y
 CONFIG_BLK_DEV_AMD74XX=y
 # CONFIG_BLK_DEV_CMD64X is not set
 # CONFIG_BLK_DEV_TRIFLEX is not set
-# CONFIG_BLK_DEV_CY82C693 is not set
 # CONFIG_BLK_DEV_CS5520 is not set
 # CONFIG_BLK_DEV_CS5530 is not set
-# CONFIG_BLK_DEV_HPT34X is not set
 # CONFIG_BLK_DEV_HPT366 is not set
 # CONFIG_BLK_DEV_JMICRON is not set
 # CONFIG_BLK_DEV_SC1200 is not set
@@ -596,8 +602,6 @@ CONFIG_BLK_DEV_AMD74XX=y
 # CONFIG_BLK_DEV_VIA82CXXX is not set
 # CONFIG_BLK_DEV_TC86C001 is not set
 CONFIG_BLK_DEV_IDEDMA=y
-# CONFIG_BLK_DEV_HD_ONLY is not set
-# CONFIG_BLK_DEV_HD is not set
 
 #
 # SCSI device support
@@ -659,6 +663,8 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_GDTH is not set
 # CONFIG_SCSI_IPS is not set
 CONFIG_SCSI_IBMVSCSI=y
+CONFIG_SCSI_IBMVFC=m
+CONFIG_SCSI_IBMVFC_TRACE=y
 # CONFIG_SCSI_INITIO is not set
 # CONFIG_SCSI_INIA100 is not set
 # CONFIG_SCSI_PPA is not set
@@ -681,6 +687,7 @@ CONFIG_SCSI_LPFC=m
 # CONFIG_SCSI_DC390T is not set
 # CONFIG_SCSI_DEBUG is not set
 # CONFIG_SCSI_SRP is not set
+# CONFIG_SCSI_DH is not set
 CONFIG_ATA=y
 # CONFIG_ATA_NONSTANDARD is not set
 CONFIG_SATA_PMP=y
@@ -703,9 +710,6 @@ CONFIG_DM_SNAPSHOT=m
 CONFIG_DM_MIRROR=m
 CONFIG_DM_ZERO=m
 CONFIG_DM_MULTIPATH=m
-CONFIG_DM_MULTIPATH_EMC=m
-# CONFIG_DM_MULTIPATH_RDAC is not set
-# CONFIG_DM_MULTIPATH_HP is not set
 # CONFIG_DM_DELAY is not set
 # CONFIG_DM_UEVENT is not set
 # CONFIG_FUSION is not set
@@ -713,12 +717,15 @@ CONFIG_DM_MULTIPATH_EMC=m
 #
 # IEEE 1394 (FireWire) support
 #
+
+#
+# Enable only one of the two stacks, unless you know what you are doing
+#
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 CONFIG_DUMMY=m
 CONFIG_BONDING=m
 # CONFIG_MACVLAN is not set
@@ -726,7 +733,23 @@ CONFIG_BONDING=m
 CONFIG_TUN=m
 # CONFIG_VETH is not set
 # CONFIG_ARCNET is not set
-# CONFIG_PHYLIB is not set
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+# CONFIG_MARVELL_PHY is not set
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+# CONFIG_SMSC_PHY is not set
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
+# CONFIG_FIXED_PHY is not set
+# CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
 # CONFIG_HAPPYMEAL is not set
@@ -759,6 +782,7 @@ CONFIG_E100=y
 # CONFIG_SIS900 is not set
 # CONFIG_EPIC100 is not set
 # CONFIG_SUNDANCE is not set
+# CONFIG_TLAN is not set
 # CONFIG_VIA_RHINE is not set
 # CONFIG_SC92031 is not set
 # CONFIG_NET_POCKET is not set
@@ -767,10 +791,8 @@ CONFIG_ACENIC=y
 CONFIG_ACENIC_OMIT_TIGON_I=y
 # CONFIG_DL2K is not set
 CONFIG_E1000=y
-# CONFIG_E1000_NAPI is not set
 # CONFIG_E1000_DISABLE_PACKET_SPLIT is not set
 # CONFIG_E1000E is not set
-# CONFIG_E1000E_ENABLED is not set
 # CONFIG_IP1000 is not set
 # CONFIG_IGB is not set
 # CONFIG_NS83820 is not set
@@ -785,14 +807,14 @@ CONFIG_TIGON3=y
 # CONFIG_BNX2 is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
+# CONFIG_ATL1E is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
 # CONFIG_CHELSIO_T3 is not set
+CONFIG_EHEA=y
 # CONFIG_IXGBE is not set
 CONFIG_IXGB=m
-# CONFIG_IXGB_NAPI is not set
 CONFIG_S2IO=m
-# CONFIG_S2IO_NAPI is not set
 # CONFIG_MYRI10GE is not set
 # CONFIG_NETXEN_NIC is not set
 # CONFIG_NIU is not set
@@ -883,6 +905,7 @@ CONFIG_MOUSE_PS2_TRACKPOINT=y
 # CONFIG_MOUSE_PS2_TOUCHKIT is not set
 # CONFIG_MOUSE_SERIAL is not set
 # CONFIG_MOUSE_APPLETOUCH is not set
+# CONFIG_MOUSE_BCM5974 is not set
 # CONFIG_MOUSE_VSXXXAA is not set
 # CONFIG_INPUT_JOYSTICK is not set
 # CONFIG_INPUT_TABLET is not set
@@ -906,12 +929,14 @@ CONFIG_SERIO_I8042=y
 # CONFIG_SERIO_PCIPS2 is not set
 CONFIG_SERIO_LIBPS2=y
 # CONFIG_SERIO_RAW is not set
+# CONFIG_SERIO_XILINX_XPS_PS2 is not set
 # CONFIG_GAMEPORT is not set
 
 #
 # Character devices
 #
 CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
 # CONFIG_VT_HW_CONSOLE_BINDING is not set
@@ -943,6 +968,7 @@ CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_PRINTER is not set
 # CONFIG_PPDEV is not set
 CONFIG_HVC_DRIVER=y
+CONFIG_HVC_IRQ=y
 CONFIG_HVC_CONSOLE=y
 CONFIG_HVC_RTAS=y
 CONFIG_HVCS=m
@@ -961,44 +987,65 @@ CONFIG_DEVPORT=y
 CONFIG_I2C=y
 CONFIG_I2C_BOARDINFO=y
 # CONFIG_I2C_CHARDEV is not set
+CONFIG_I2C_HELPER_AUTO=y
 CONFIG_I2C_ALGOBIT=y
 
 #
 # I2C Hardware Bus support
 #
+
+#
+# PC SMBus host controller drivers
+#
 # CONFIG_I2C_ALI1535 is not set
 # CONFIG_I2C_ALI1563 is not set
 # CONFIG_I2C_ALI15X3 is not set
 # CONFIG_I2C_AMD756 is not set
 # CONFIG_I2C_AMD8111 is not set
 # CONFIG_I2C_I801 is not set
-# CONFIG_I2C_I810 is not set
+# CONFIG_I2C_ISCH is not set
 # CONFIG_I2C_PIIX4 is not set
 # CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_PROSAVAGE is not set
-# CONFIG_I2C_SAVAGE4 is not set
-# CONFIG_I2C_SIMTEC is not set
 # CONFIG_I2C_SIS5595 is not set
 # CONFIG_I2C_SIS630 is not set
 # CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_TINY_USB is not set
 # CONFIG_I2C_VIA is not set
 # CONFIG_I2C_VIAPRO is not set
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT is not set
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Graphics adapter I2C/DDC channel drivers
+#
 # CONFIG_I2C_VOODOO3 is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
 # CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
 
 #
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
+# CONFIG_AT24 is not set
 # CONFIG_SENSORS_EEPROM is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
@@ -1007,10 +1054,13 @@ CONFIG_I2C_ALGOBIT=y
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
 # CONFIG_SPI is not set
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+# CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 # CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
 
 #
@@ -1022,8 +1072,10 @@ CONFIG_SSB_POSSIBLE=y
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
 
 #
 # Multimedia devices
@@ -1102,10 +1154,13 @@ CONFIG_FB_RADEON_BACKLIGHT=y
 # CONFIG_FB_TRIDENT is not set
 # CONFIG_FB_ARK is not set
 # CONFIG_FB_PM3 is not set
+# CONFIG_FB_CARMINE is not set
 CONFIG_FB_IBM_GXT4500=y
 # CONFIG_FB_VIRTUAL is not set
 CONFIG_BACKLIGHT_LCD_SUPPORT=y
 CONFIG_LCD_CLASS_DEVICE=m
+# CONFIG_LCD_ILI9320 is not set
+CONFIG_LCD_PLATFORM=m
 CONFIG_BACKLIGHT_CLASS_DEVICE=y
 # CONFIG_BACKLIGHT_CORGI is not set
 
@@ -1133,10 +1188,6 @@ CONFIG_LOGO=y
 CONFIG_LOGO_LINUX_MONO=y
 CONFIG_LOGO_LINUX_VGA16=y
 CONFIG_LOGO_LINUX_CLUT224=y
-
-#
-# Sound
-#
 # CONFIG_SOUND is not set
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
@@ -1165,6 +1216,7 @@ CONFIG_USB_DEVICEFS=y
 CONFIG_USB_DEVICE_CLASS=y
 # CONFIG_USB_DYNAMIC_MINORS is not set
 # CONFIG_USB_OTG is not set
+CONFIG_USB_MON=y
 
 #
 # USB Host Controller Drivers
@@ -1190,6 +1242,7 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y
 #
 # CONFIG_USB_ACM is not set
 # CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
 
 #
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
@@ -1211,6 +1264,7 @@ CONFIG_USB_STORAGE=y
 # CONFIG_USB_STORAGE_ALAUDA is not set
 CONFIG_USB_STORAGE_ONETOUCH=y
 # CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_SIERRA is not set
 # CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
 # CONFIG_USB_LIBUSUAL is not set
 
@@ -1219,7 +1273,6 @@ CONFIG_USB_STORAGE_ONETOUCH=y
 #
 # CONFIG_USB_MDC800 is not set
 # CONFIG_USB_MICROTEK is not set
-CONFIG_USB_MON=y
 
 #
 # USB port drivers
@@ -1233,7 +1286,6 @@ CONFIG_USB_MON=y
 # CONFIG_USB_EMI62 is not set
 # CONFIG_USB_EMI26 is not set
 # CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_AUERSWALD is not set
 # CONFIG_USB_RIO500 is not set
 # CONFIG_USB_LEGOTOWER is not set
 # CONFIG_USB_LCD is not set
@@ -1250,6 +1302,7 @@ CONFIG_USB_MON=y
 # CONFIG_USB_TRANCEVIBRATOR is not set
 # CONFIG_USB_IOWARRIOR is not set
 # CONFIG_USB_TEST is not set
+# CONFIG_USB_ISIGHTFW is not set
 # CONFIG_USB_GADGET is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
@@ -1316,6 +1369,7 @@ CONFIG_XFS_POSIX_ACL=y
 # CONFIG_GFS2_FS is not set
 CONFIG_OCFS2_FS=m
 CONFIG_OCFS2_FS_O2CB=m
+CONFIG_OCFS2_FS_STATS=y
 CONFIG_OCFS2_DEBUG_MASKLOG=y
 # CONFIG_OCFS2_DEBUG_FS is not set
 CONFIG_DNOTIFY=y
@@ -1371,6 +1425,7 @@ CONFIG_CONFIGFS_FS=m
 CONFIG_CRAMFS=y
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
 # CONFIG_ROMFS_FS is not set
@@ -1394,7 +1449,6 @@ CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 CONFIG_SUNRPC_GSS=y
 CONFIG_SUNRPC_XPRT_RDMA=m
-# CONFIG_SUNRPC_BIND34 is not set
 CONFIG_RPCSEC_GSS_KRB5=y
 CONFIG_RPCSEC_GSS_SPKM3=m
 # CONFIG_SMB_FS is not set
@@ -1463,6 +1517,7 @@ CONFIG_BITREVERSE=y
 # CONFIG_GENERIC_FIND_FIRST_BIT is not set
 CONFIG_CRC_CCITT=m
 # CONFIG_CRC16 is not set
+CONFIG_CRC_T10DIF=y
 CONFIG_CRC_ITU_T=m
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
@@ -1495,8 +1550,10 @@ CONFIG_DEBUG_FS=y
 CONFIG_DEBUG_KERNEL=y
 # CONFIG_DEBUG_SHIRQ is not set
 CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
 CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
+CONFIG_SCHEDSTATS=y
 # CONFIG_TIMER_STATS is not set
 # CONFIG_DEBUG_OBJECTS is not set
 # CONFIG_SLUB_DEBUG_ON is not set
@@ -1508,30 +1565,49 @@ CONFIG_SCHED_DEBUG=y
 # CONFIG_DEBUG_LOCK_ALLOC is not set
 # CONFIG_PROVE_LOCKING is not set
 # CONFIG_LOCK_STAT is not set
+CONFIG_TRACE_IRQFLAGS=y
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
 # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+CONFIG_STACKTRACE=y
 # CONFIG_DEBUG_KOBJECT is not set
 CONFIG_DEBUG_BUGVERBOSE=y
 # CONFIG_DEBUG_INFO is not set
 # CONFIG_DEBUG_VM is not set
 # CONFIG_DEBUG_WRITECOUNT is not set
+CONFIG_DEBUG_MEMORY_INIT=y
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
+CONFIG_FRAME_POINTER=y
 # CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_KPROBES_SANITY_TEST is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_LKDTM is not set
 # CONFIG_FAULT_INJECTION is not set
+CONFIG_LATENCYTOP=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_TRACER_MAX_TRACE=y
+CONFIG_TRACING=y
+# CONFIG_FTRACE is not set
+CONFIG_IRQSOFF_TRACER=y
+CONFIG_SCHED_TRACER=y
+CONFIG_CONTEXT_SWITCH_TRACER=y
+# CONFIG_FTRACE_STARTUP_TEST is not set
 # CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
 CONFIG_DEBUG_STACKOVERFLOW=y
 # CONFIG_DEBUG_STACK_USAGE is not set
 # CONFIG_DEBUG_PAGEALLOC is not set
 CONFIG_HCALL_STATS=y
-CONFIG_DEBUGGER=y
+# CONFIG_CODE_PATCHING_SELFTEST is not set
+# CONFIG_FTR_FIXUP_SELFTEST is not set
 CONFIG_XMON=y
 CONFIG_XMON_DEFAULT=y
 CONFIG_XMON_DISASSEMBLY=y
+CONFIG_DEBUGGER=y
 CONFIG_IRQSTACKS=y
 CONFIG_VIRQ_DEBUG=y
 # CONFIG_BOOTX_TEXT is not set
@@ -1590,6 +1666,10 @@ CONFIG_CRYPTO_CRC32C=m
 CONFIG_CRYPTO_MD4=m
 CONFIG_CRYPTO_MD5=y
 CONFIG_CRYPTO_MICHAEL_MIC=m
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
 CONFIG_CRYPTO_SHA1=m
 CONFIG_CRYPTO_SHA256=m
 CONFIG_CRYPTO_SHA512=m
diff --git a/arch/powerpc/configs/sbc8641d_defconfig b/arch/powerpc/configs/sbc8641d_defconfig
index 8227510b41a9..f545421f9857 100644
--- a/arch/powerpc/configs/sbc8641d_defconfig
+++ b/arch/powerpc/configs/sbc8641d_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc5
-# Mon Jun  9 08:52:19 2008
+# Linux kernel version: 2.6.27-rc4
+# Thu Aug 21 00:52:15 2008
 #
 # CONFIG_PPC64 is not set
 
@@ -33,6 +33,7 @@ CONFIG_GENERIC_HARDIRQS=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_GENERIC_LOCKBREAK=y
@@ -92,7 +93,6 @@ CONFIG_INITRAMFS_SOURCE=""
 CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
@@ -100,6 +100,7 @@ CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
+CONFIG_PCSPKR_PLATFORM=y
 CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
@@ -117,10 +118,16 @@ CONFIG_SLAB=y
 # CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
+CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
 # CONFIG_HAVE_DMA_ATTRS is not set
+CONFIG_USE_GENERIC_SMP_HELPERS=y
+# CONFIG_HAVE_CLK is not set
 CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
@@ -138,6 +145,7 @@ CONFIG_BLOCK=y
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -156,30 +164,40 @@ CONFIG_CLASSIC_RCU=y
 #
 # Platform support
 #
-# CONFIG_PPC_MULTIPLATFORM is not set
-# CONFIG_PPC_82xx is not set
-# CONFIG_PPC_83xx is not set
-CONFIG_PPC_86xx=y
-# CONFIG_PPC_MPC512x is not set
-# CONFIG_PPC_MPC5121 is not set
+CONFIG_PPC_MULTIPLATFORM=y
+CONFIG_CLASSIC32=y
+CONFIG_PPC_CHRP=y
+# CONFIG_MPC5121_ADS is not set
+# CONFIG_MPC5121_GENERIC is not set
+# CONFIG_PPC_MPC52xx is not set
+CONFIG_PPC_PMAC=y
 # CONFIG_PPC_CELL is not set
 # CONFIG_PPC_CELL_NATIVE is not set
+# CONFIG_PPC_82xx is not set
 # CONFIG_PQ2ADS is not set
+# CONFIG_PPC_83xx is not set
+CONFIG_PPC_86xx=y
 # CONFIG_MPC8641_HPCN is not set
 CONFIG_SBC8641D=y
 # CONFIG_MPC8610_HPCD is not set
 CONFIG_MPC8641=y
+CONFIG_PPC_NATIVE=y
+# CONFIG_UDBG_RTAS_CONSOLE is not set
 # CONFIG_IPIC is not set
 CONFIG_MPIC=y
 # CONFIG_MPIC_WEIRD is not set
-# CONFIG_PPC_I8259 is not set
-# CONFIG_PPC_RTAS is not set
+CONFIG_PPC_I8259=y
+CONFIG_PPC_RTAS=y
+# CONFIG_RTAS_ERROR_LOGGING is not set
+CONFIG_RTAS_PROC=y
 # CONFIG_MMIO_NVRAM is not set
-# CONFIG_PPC_MPC106 is not set
+CONFIG_PPC_MPC106=y
 # CONFIG_PPC_970_NAP is not set
 # CONFIG_PPC_INDIRECT_IO is not set
 # CONFIG_GENERIC_IOMAP is not set
 # CONFIG_CPU_FREQ is not set
+# CONFIG_PPC601_SYNC_FIX is not set
+# CONFIG_TAU is not set
 # CONFIG_FSL_ULI1575 is not set
 
 #
@@ -195,7 +213,7 @@ CONFIG_HZ_250=y
 # CONFIG_HZ_300 is not set
 # CONFIG_HZ_1000 is not set
 CONFIG_HZ=250
-# CONFIG_SCHED_HRTICK is not set
+CONFIG_SCHED_HRTICK=y
 # CONFIG_PREEMPT_NONE is not set
 # CONFIG_PREEMPT_VOLUNTARY is not set
 CONFIG_PREEMPT=y
@@ -203,9 +221,11 @@ CONFIG_PREEMPT=y
 CONFIG_BINFMT_ELF=y
 CONFIG_BINFMT_MISC=m
 # CONFIG_IOMMU_HELPER is not set
+# CONFIG_HOTPLUG_CPU is not set
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_HAS_WALK_MEMORY=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+# CONFIG_KEXEC is not set
 CONFIG_IRQ_ALL_CPUS=y
 CONFIG_ARCH_FLATMEM_ENABLE=y
 CONFIG_ARCH_POPULATES_NODE_MAP=y
@@ -219,6 +239,7 @@ CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_MIGRATION=y
 # CONFIG_RESOURCES_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
@@ -226,6 +247,7 @@ CONFIG_VIRT_TO_BUS=y
 CONFIG_FORCE_MAX_ZONEORDER=11
 # CONFIG_PROC_DEVICETREE is not set
 # CONFIG_CMDLINE_BOOL is not set
+CONFIG_EXTRA_TARGETS=""
 # CONFIG_PM is not set
 CONFIG_SECCOMP=y
 CONFIG_ISA_DMA_API=y
@@ -233,11 +255,13 @@ CONFIG_ISA_DMA_API=y
 #
 # Bus options
 #
+# CONFIG_ISA is not set
 CONFIG_ZONE_DMA=y
 CONFIG_GENERIC_ISA_DMA=y
 CONFIG_PPC_INDIRECT_PCI=y
 CONFIG_FSL_SOC=y
 CONFIG_FSL_PCI=y
+CONFIG_PPC_PCI_CHOICE=y
 CONFIG_PCI=y
 CONFIG_PCI_DOMAINS=y
 CONFIG_PCI_SYSCALL=y
@@ -265,10 +289,6 @@ CONFIG_PAGE_OFFSET=0xc0000000
 CONFIG_KERNEL_START=0xc0000000
 CONFIG_PHYSICAL_START=0x00000000
 CONFIG_TASK_SIZE=0xc0000000
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -282,6 +302,7 @@ CONFIG_XFRM_USER=m
 # CONFIG_XFRM_SUB_POLICY is not set
 # CONFIG_XFRM_MIGRATE is not set
 # CONFIG_XFRM_STATISTICS is not set
+CONFIG_XFRM_IPCOMP=m
 CONFIG_NET_KEY=m
 # CONFIG_NET_KEY_MIGRATE is not set
 CONFIG_INET=y
@@ -406,6 +427,7 @@ CONFIG_IP_NF_MANGLE=m
 CONFIG_IP_NF_TARGET_ECN=m
 # CONFIG_IP_NF_TARGET_TTL is not set
 CONFIG_IP_NF_RAW=m
+# CONFIG_IP_NF_SECURITY is not set
 CONFIG_IP_NF_ARPTABLES=m
 CONFIG_IP_NF_ARPFILTER=m
 CONFIG_IP_NF_ARP_MANGLE=m
@@ -429,6 +451,7 @@ CONFIG_IP6_NF_TARGET_LOG=m
 CONFIG_IP6_NF_MANGLE=m
 # CONFIG_IP6_NF_TARGET_HL is not set
 CONFIG_IP6_NF_RAW=m
+# CONFIG_IP6_NF_SECURITY is not set
 
 #
 # Bridge: Netfilter Configuration
@@ -451,8 +474,10 @@ CONFIG_ATM_LANE=m
 CONFIG_ATM_MPOA=m
 CONFIG_ATM_BR2684=m
 # CONFIG_ATM_BR2684_IPFILTER is not set
+CONFIG_STP=m
 CONFIG_BRIDGE=m
 CONFIG_VLAN_8021Q=m
+# CONFIG_VLAN_8021Q_GVRP is not set
 # CONFIG_DECNET is not set
 CONFIG_LLC=m
 # CONFIG_LLC2 is not set
@@ -472,7 +497,6 @@ CONFIG_NET_SCH_HTB=m
 CONFIG_NET_SCH_HFSC=m
 CONFIG_NET_SCH_ATM=m
 CONFIG_NET_SCH_PRIO=m
-# CONFIG_NET_SCH_RR is not set
 CONFIG_NET_SCH_RED=m
 CONFIG_NET_SCH_SFQ=m
 CONFIG_NET_SCH_TEQL=m
@@ -625,6 +649,7 @@ CONFIG_OF_I2C=y
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_FD is not set
+# CONFIG_MAC_FLOPPY is not set
 # CONFIG_BLK_CPQ_DA is not set
 # CONFIG_BLK_CPQ_CISS_DA is not set
 # CONFIG_BLK_DEV_DAC960 is not set
@@ -640,12 +665,14 @@ CONFIG_BLK_DEV_RAM_SIZE=4096
 # CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_PHANTOM is not set
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_HP_ILO is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -680,12 +707,15 @@ CONFIG_DM_ZERO=y
 #
 # IEEE 1394 (FireWire) support
 #
+
+#
+# Enable only one of the two stacks, unless you know what you are doing
+#
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 CONFIG_DUMMY=m
 CONFIG_BONDING=m
 # CONFIG_MACVLAN is not set
@@ -712,6 +742,8 @@ CONFIG_BROADCOM_PHY=y
 # CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
+# CONFIG_MACE is not set
+# CONFIG_BMAC is not set
 # CONFIG_HAPPYMEAL is not set
 # CONFIG_SUNGEM is not set
 # CONFIG_CASSINI is not set
@@ -729,7 +761,6 @@ CONFIG_NETDEV_1000=y
 # CONFIG_DL2K is not set
 # CONFIG_E1000 is not set
 # CONFIG_E1000E is not set
-# CONFIG_E1000E_ENABLED is not set
 # CONFIG_IP1000 is not set
 # CONFIG_IGB is not set
 # CONFIG_NS83820 is not set
@@ -743,9 +774,10 @@ CONFIG_NETDEV_1000=y
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
 CONFIG_GIANFAR=y
-# CONFIG_GFAR_NAPI is not set
+# CONFIG_MV643XX_ETH is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
+# CONFIG_ATL1E is not set
 # CONFIG_NETDEV_10000 is not set
 # CONFIG_TR is not set
 
@@ -768,7 +800,7 @@ CONFIG_ATM_DRIVERS=y
 # CONFIG_ATM_AMBASSADOR is not set
 # CONFIG_ATM_HORIZON is not set
 # CONFIG_ATM_IA is not set
-# CONFIG_ATM_FORE200E_MAYBE is not set
+# CONFIG_ATM_FORE200E is not set
 # CONFIG_ATM_HE is not set
 # CONFIG_FDDI is not set
 # CONFIG_HIPPI is not set
@@ -834,6 +866,7 @@ CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
 # Character devices
 #
 CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
 # CONFIG_VT_HW_CONSOLE_BINDING is not set
@@ -857,11 +890,14 @@ CONFIG_SERIAL_8250_RUNTIME_UARTS=2
 # CONFIG_SERIAL_UARTLITE is not set
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_PMACZILOG is not set
 # CONFIG_SERIAL_JSM is not set
 # CONFIG_SERIAL_OF_PLATFORM is not set
 CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_BRIQ_PANEL is not set
+# CONFIG_HVC_RTAS is not set
 # CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=m
 # CONFIG_NVRAM is not set
@@ -874,42 +910,69 @@ CONFIG_DEVPORT=y
 CONFIG_I2C=y
 CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
 
 #
 # I2C Hardware Bus support
 #
+
+#
+# PC SMBus host controller drivers
+#
 # CONFIG_I2C_ALI1535 is not set
 # CONFIG_I2C_ALI1563 is not set
 # CONFIG_I2C_ALI15X3 is not set
 # CONFIG_I2C_AMD756 is not set
 # CONFIG_I2C_AMD8111 is not set
 # CONFIG_I2C_I801 is not set
-# CONFIG_I2C_I810 is not set
+# CONFIG_I2C_ISCH is not set
 # CONFIG_I2C_PIIX4 is not set
-CONFIG_I2C_MPC=y
 # CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_PROSAVAGE is not set
-# CONFIG_I2C_SAVAGE4 is not set
-# CONFIG_I2C_SIMTEC is not set
 # CONFIG_I2C_SIS5595 is not set
 # CONFIG_I2C_SIS630 is not set
 # CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_STUB is not set
 # CONFIG_I2C_VIA is not set
 # CONFIG_I2C_VIAPRO is not set
+
+#
+# Mac SMBus host controller drivers
+#
+# CONFIG_I2C_HYDRA is not set
+CONFIG_I2C_POWERMAC=y
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+CONFIG_I2C_MPC=y
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+
+#
+# Graphics adapter I2C/DDC channel drivers
+#
 # CONFIG_I2C_VOODOO3 is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
 # CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
 
 #
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
+# CONFIG_AT24 is not set
 # CONFIG_SENSORS_EEPROM is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
@@ -918,10 +981,13 @@ CONFIG_I2C_MPC=y
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
 # CONFIG_SPI is not set
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+# CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 CONFIG_HWMON=y
 # CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_AD7414 is not set
 # CONFIG_SENSORS_AD7418 is not set
 # CONFIG_SENSORS_ADM1021 is not set
 # CONFIG_SENSORS_ADM1025 is not set
@@ -931,6 +997,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_ADM9240 is not set
 # CONFIG_SENSORS_ADT7470 is not set
 # CONFIG_SENSORS_ADT7473 is not set
+# CONFIG_SENSORS_AMS is not set
 # CONFIG_SENSORS_ATXP1 is not set
 # CONFIG_SENSORS_DS1621 is not set
 # CONFIG_SENSORS_I5K_AMB is not set
@@ -975,6 +1042,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_W83627EHF is not set
 # CONFIG_HWMON_DEBUG_CHIP is not set
 # CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
 CONFIG_WATCHDOG=y
 # CONFIG_WATCHDOG_NOWAYOUT is not set
 
@@ -982,6 +1050,9 @@ CONFIG_WATCHDOG=y
 # Watchdog Device Drivers
 #
 CONFIG_SOFT_WATCHDOG=m
+# CONFIG_ALIM7101_WDT is not set
+# CONFIG_8xxx_WDT is not set
+# CONFIG_WATCHDOG_RTAS is not set
 
 #
 # PCI-based Watchdog Cards
@@ -998,8 +1069,10 @@ CONFIG_SSB_POSSIBLE=y
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
 
 #
 # Multimedia devices
@@ -1038,10 +1111,6 @@ CONFIG_VIDEO_OUTPUT_CONTROL=m
 CONFIG_VGA_CONSOLE=y
 # CONFIG_VGACON_SOFT_SCROLLBACK is not set
 CONFIG_DUMMY_CONSOLE=y
-
-#
-# Sound
-#
 # CONFIG_SOUND is not set
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
@@ -1056,6 +1125,10 @@ CONFIG_USB_ARCH_HAS_EHCI=y
 # CONFIG_USB_OTG_BLACKLIST_HUB is not set
 
 #
+# Enable Host or Gadget support to see Inventra options
+#
+
+#
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
 #
 # CONFIG_USB_GADGET is not set
@@ -1096,6 +1169,7 @@ CONFIG_FS_POSIX_ACL=y
 # CONFIG_XFS_FS is not set
 CONFIG_OCFS2_FS=m
 CONFIG_OCFS2_FS_O2CB=m
+CONFIG_OCFS2_FS_STATS=y
 CONFIG_OCFS2_DEBUG_MASKLOG=y
 # CONFIG_OCFS2_DEBUG_FS is not set
 CONFIG_DNOTIFY=y
@@ -1145,6 +1219,7 @@ CONFIG_CONFIGFS_FS=m
 # CONFIG_CRAMFS is not set
 # CONFIG_VXFS_FS is not set
 CONFIG_MINIX_FS=m
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
 CONFIG_ROMFS_FS=m
@@ -1155,14 +1230,13 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
-# CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_BIND34 is not set
 CONFIG_RPCSEC_GSS_KRB5=y
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 CONFIG_SMB_FS=m
@@ -1183,6 +1257,7 @@ CONFIG_CIFS_POSIX=y
 # Partition Types
 #
 # CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MAC_PARTITION=y
 CONFIG_MSDOS_PARTITION=y
 CONFIG_NLS=m
 CONFIG_NLS_DEFAULT="iso8859-1"
@@ -1233,6 +1308,7 @@ CONFIG_BITREVERSE=y
 # CONFIG_GENERIC_FIND_FIRST_BIT is not set
 CONFIG_CRC_CCITT=m
 # CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
 # CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
@@ -1259,6 +1335,8 @@ CONFIG_DEBUG_FS=y
 CONFIG_DEBUG_KERNEL=y
 # CONFIG_DEBUG_SHIRQ is not set
 CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
 CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
@@ -1275,21 +1353,34 @@ CONFIG_SCHED_DEBUG=y
 CONFIG_DEBUG_INFO=y
 # CONFIG_DEBUG_VM is not set
 # CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+# CONFIG_FTRACE is not set
+# CONFIG_PREEMPT_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
 # CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
 # CONFIG_DEBUG_PAGEALLOC is not set
-CONFIG_DEBUGGER=y
+# CONFIG_CODE_PATCHING_SELFTEST is not set
+# CONFIG_FTR_FIXUP_SELFTEST is not set
 # CONFIG_XMON is not set
 # CONFIG_IRQSTACKS is not set
 # CONFIG_VIRQ_DEBUG is not set
 # CONFIG_BDI_SWITCH is not set
+# CONFIG_BOOTX_TEXT is not set
 # CONFIG_PPC_EARLY_DEBUG is not set
 
 #
@@ -1299,7 +1390,6 @@ CONFIG_DEBUGGER=y
 CONFIG_SECURITY=y
 CONFIG_SECURITY_NETWORK=y
 # CONFIG_SECURITY_NETWORK_XFRM is not set
-CONFIG_SECURITY_CAPABILITIES=y
 # CONFIG_SECURITY_FILE_CAPABILITIES is not set
 CONFIG_SECURITY_DEFAULT_MMAP_MIN_ADDR=0
 CONFIG_CRYPTO=y
@@ -1349,6 +1439,10 @@ CONFIG_CRYPTO_CRC32C=m
 CONFIG_CRYPTO_MD4=m
 CONFIG_CRYPTO_MD5=y
 CONFIG_CRYPTO_MICHAEL_MIC=m
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
 CONFIG_CRYPTO_SHA1=m
 CONFIG_CRYPTO_SHA256=m
 CONFIG_CRYPTO_SHA512=m
@@ -1382,5 +1476,6 @@ CONFIG_CRYPTO_DEFLATE=m
 # CONFIG_CRYPTO_LZO is not set
 CONFIG_CRYPTO_HW=y
 # CONFIG_CRYPTO_DEV_HIFN_795X is not set
+# CONFIG_CRYPTO_DEV_TALITOS is not set
 # CONFIG_PPC_CLOCK is not set
 # CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/storcenter_defconfig b/arch/powerpc/configs/storcenter_defconfig
index 88f6aa8273be..4340cc1c5b6a 100644
--- a/arch/powerpc/configs/storcenter_defconfig
+++ b/arch/powerpc/configs/storcenter_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc5
-# Mon Jun  9 08:52:20 2008
+# Linux kernel version: 2.6.27-rc4
+# Thu Aug 21 00:52:16 2008
 #
 # CONFIG_PPC64 is not set
 
@@ -32,6 +32,7 @@ CONFIG_GENERIC_HARDIRQS=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
@@ -87,7 +88,6 @@ CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
 # CONFIG_KALLSYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
@@ -110,10 +110,16 @@ CONFIG_SLUB=y
 # CONFIG_PROFILING is not set
 # CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
+CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
 # CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+# CONFIG_HAVE_CLK is not set
 CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
@@ -130,6 +136,7 @@ CONFIG_LBD=y
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -149,25 +156,25 @@ CONFIG_CLASSIC_RCU=y
 # Platform support
 #
 CONFIG_PPC_MULTIPLATFORM=y
-# CONFIG_PPC_82xx is not set
-# CONFIG_PPC_83xx is not set
-# CONFIG_PPC_86xx is not set
 CONFIG_CLASSIC32=y
 # CONFIG_PPC_CHRP is not set
-# CONFIG_PPC_MPC512x is not set
-# CONFIG_PPC_MPC5121 is not set
 # CONFIG_MPC5121_ADS is not set
+# CONFIG_MPC5121_GENERIC is not set
 # CONFIG_PPC_MPC52xx is not set
 # CONFIG_PPC_PMAC is not set
 # CONFIG_PPC_CELL is not set
 # CONFIG_PPC_CELL_NATIVE is not set
+# CONFIG_PPC_82xx is not set
 # CONFIG_PQ2ADS is not set
+# CONFIG_PPC_83xx is not set
+# CONFIG_PPC_86xx is not set
 CONFIG_EMBEDDED6xx=y
 # CONFIG_LINKSTATION is not set
 CONFIG_STORCENTER=y
 # CONFIG_MPC7448HPC2 is not set
 # CONFIG_PPC_HOLLY is not set
 # CONFIG_PPC_PRPMC2800 is not set
+# CONFIG_PPC_C2K is not set
 CONFIG_MPC10X_BRIDGE=y
 CONFIG_MPC10X_OPENPIC=y
 # CONFIG_MPC10X_STORE_GATHERING is not set
@@ -221,6 +228,7 @@ CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_MIGRATION=y
 # CONFIG_RESOURCES_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
@@ -229,6 +237,7 @@ CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 CONFIG_CMDLINE_BOOL=y
 CONFIG_CMDLINE="console=ttyS0,115200"
+CONFIG_EXTRA_TARGETS=""
 # CONFIG_PM is not set
 # CONFIG_SECCOMP is not set
 CONFIG_ISA_DMA_API=y
@@ -264,10 +273,6 @@ CONFIG_PAGE_OFFSET=0xc0000000
 CONFIG_KERNEL_START=0xc0000000
 CONFIG_PHYSICAL_START=0x00000000
 CONFIG_TASK_SIZE=0xc0000000
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -456,20 +461,22 @@ CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_RAM is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_PHANTOM is not set
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_HP_ILO is not set
 CONFIG_HAVE_IDE=y
 CONFIG_IDE=y
-CONFIG_IDE_MAX_HWIFS=4
 CONFIG_BLK_DEV_IDE=y
 
 #
 # Please see Documentation/ide/ide.txt for help/info on IDE drives
 #
+CONFIG_IDE_TIMINGS=y
 # CONFIG_BLK_DEV_IDE_SATA is not set
 CONFIG_BLK_DEV_IDEDISK=y
 CONFIG_IDEDISK_MULTI_MODE=y
@@ -483,7 +490,6 @@ CONFIG_IDE_PROC_FS=y
 #
 # IDE chipset support/bugfixes
 #
-CONFIG_IDE_GENERIC=y
 # CONFIG_BLK_DEV_PLATFORM is not set
 CONFIG_BLK_DEV_IDEDMA_SFF=y
 
@@ -500,10 +506,8 @@ CONFIG_BLK_DEV_IDEDMA_PCI=y
 # CONFIG_BLK_DEV_AMD74XX is not set
 # CONFIG_BLK_DEV_CMD64X is not set
 # CONFIG_BLK_DEV_TRIFLEX is not set
-# CONFIG_BLK_DEV_CY82C693 is not set
 # CONFIG_BLK_DEV_CS5520 is not set
 # CONFIG_BLK_DEV_CS5530 is not set
-# CONFIG_BLK_DEV_HPT34X is not set
 # CONFIG_BLK_DEV_HPT366 is not set
 # CONFIG_BLK_DEV_JMICRON is not set
 # CONFIG_BLK_DEV_SC1200 is not set
@@ -521,8 +525,6 @@ CONFIG_BLK_DEV_IDEDMA_PCI=y
 CONFIG_BLK_DEV_VIA82CXXX=y
 # CONFIG_BLK_DEV_TC86C001 is not set
 CONFIG_BLK_DEV_IDEDMA=y
-# CONFIG_BLK_DEV_HD_ONLY is not set
-# CONFIG_BLK_DEV_HD is not set
 
 #
 # SCSI device support
@@ -599,6 +601,7 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_NSP32 is not set
 # CONFIG_SCSI_DEBUG is not set
 # CONFIG_SCSI_SRP is not set
+# CONFIG_SCSI_DH is not set
 # CONFIG_ATA is not set
 CONFIG_MD=y
 CONFIG_BLK_DEV_MD=y
@@ -616,12 +619,15 @@ CONFIG_MD_RAID5_RESHAPE=y
 #
 # IEEE 1394 (FireWire) support
 #
+
+#
+# Enable only one of the two stacks, unless you know what you are doing
+#
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 CONFIG_DUMMY=m
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -635,14 +641,12 @@ CONFIG_NETDEV_1000=y
 # CONFIG_DL2K is not set
 # CONFIG_E1000 is not set
 # CONFIG_E1000E is not set
-# CONFIG_E1000E_ENABLED is not set
 # CONFIG_IP1000 is not set
 # CONFIG_IGB is not set
 # CONFIG_NS83820 is not set
 # CONFIG_HAMACHI is not set
 # CONFIG_YELLOWFIN is not set
 CONFIG_R8169=y
-# CONFIG_R8169_NAPI is not set
 # CONFIG_SIS190 is not set
 # CONFIG_SKGE is not set
 # CONFIG_SKY2 is not set
@@ -653,6 +657,7 @@ CONFIG_R8169=y
 # CONFIG_MV643XX_ETH is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
+# CONFIG_ATL1E is not set
 # CONFIG_NETDEV_10000 is not set
 # CONFIG_TR is not set
 
@@ -734,43 +739,64 @@ CONFIG_DEVPORT=y
 CONFIG_I2C=y
 CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
 
 #
 # I2C Hardware Bus support
 #
+
+#
+# PC SMBus host controller drivers
+#
 # CONFIG_I2C_ALI1535 is not set
 # CONFIG_I2C_ALI1563 is not set
 # CONFIG_I2C_ALI15X3 is not set
 # CONFIG_I2C_AMD756 is not set
 # CONFIG_I2C_AMD8111 is not set
 # CONFIG_I2C_I801 is not set
-# CONFIG_I2C_I810 is not set
+# CONFIG_I2C_ISCH is not set
 # CONFIG_I2C_PIIX4 is not set
-CONFIG_I2C_MPC=y
 # CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_PROSAVAGE is not set
-# CONFIG_I2C_SAVAGE4 is not set
-# CONFIG_I2C_SIMTEC is not set
 # CONFIG_I2C_SIS5595 is not set
 # CONFIG_I2C_SIS630 is not set
 # CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_TINY_USB is not set
 # CONFIG_I2C_VIA is not set
 # CONFIG_I2C_VIAPRO is not set
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+CONFIG_I2C_MPC=y
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Graphics adapter I2C/DDC channel drivers
+#
 # CONFIG_I2C_VOODOO3 is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
 # CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
 
 #
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
+# CONFIG_AT24 is not set
 # CONFIG_SENSORS_EEPROM is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
@@ -779,10 +805,13 @@ CONFIG_I2C_MPC=y
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
 # CONFIG_SPI is not set
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+# CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 # CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
 
 #
@@ -794,8 +823,10 @@ CONFIG_SSB_POSSIBLE=y
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
 
 #
 # Multimedia devices
@@ -827,10 +858,6 @@ CONFIG_SSB_POSSIBLE=y
 # Display device support
 #
 # CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Sound
-#
 # CONFIG_SOUND is not set
 CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
@@ -849,6 +876,7 @@ CONFIG_USB_DEVICE_CLASS=y
 # CONFIG_USB_OTG is not set
 # CONFIG_USB_OTG_WHITELIST is not set
 # CONFIG_USB_OTG_BLACKLIST_HUB is not set
+# CONFIG_USB_MON is not set
 
 #
 # USB Host Controller Drivers
@@ -896,6 +924,7 @@ CONFIG_USB_STORAGE=y
 # CONFIG_USB_STORAGE_JUMPSHOT is not set
 # CONFIG_USB_STORAGE_ALAUDA is not set
 # CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_SIERRA is not set
 # CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
 # CONFIG_USB_LIBUSUAL is not set
 
@@ -904,7 +933,6 @@ CONFIG_USB_STORAGE=y
 #
 # CONFIG_USB_MDC800 is not set
 # CONFIG_USB_MICROTEK is not set
-# CONFIG_USB_MON is not set
 
 #
 # USB port drivers
@@ -917,7 +945,6 @@ CONFIG_USB_STORAGE=y
 # CONFIG_USB_EMI62 is not set
 # CONFIG_USB_EMI26 is not set
 # CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_AUERSWALD is not set
 # CONFIG_USB_RIO500 is not set
 # CONFIG_USB_LEGOTOWER is not set
 # CONFIG_USB_LCD is not set
@@ -971,6 +998,7 @@ CONFIG_RTC_DRV_DS1307=y
 # CONFIG_RTC_DRV_PCF8583 is not set
 # CONFIG_RTC_DRV_M41T80 is not set
 # CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
 
 #
 # SPI RTC drivers
@@ -1074,6 +1102,7 @@ CONFIG_JFFS2_RTIME=y
 # CONFIG_CRAMFS is not set
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
 # CONFIG_ROMFS_FS is not set
@@ -1151,6 +1180,7 @@ CONFIG_BITREVERSE=y
 # CONFIG_GENERIC_FIND_FIRST_BIT is not set
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
+CONFIG_CRC_T10DIF=y
 # CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
@@ -1178,7 +1208,16 @@ CONFIG_FRAME_WARN=1024
 # CONFIG_SLUB_DEBUG_ON is not set
 # CONFIG_SLUB_STATS is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+# CONFIG_FTRACE is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
 # CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_IRQSTACKS is not set
 # CONFIG_BOOTX_TEXT is not set
 # CONFIG_PPC_EARLY_DEBUG is not set
diff --git a/include/asm-powerpc/8253pit.h b/arch/powerpc/include/asm/8253pit.h
index b70d6e53b303..b70d6e53b303 100644
--- a/include/asm-powerpc/8253pit.h
+++ b/arch/powerpc/include/asm/8253pit.h
diff --git a/include/asm-powerpc/8xx_immap.h b/arch/powerpc/include/asm/8xx_immap.h
index 4b0e15206006..4b0e15206006 100644
--- a/include/asm-powerpc/8xx_immap.h
+++ b/arch/powerpc/include/asm/8xx_immap.h
diff --git a/arch/powerpc/include/asm/Kbuild b/arch/powerpc/include/asm/Kbuild
new file mode 100644
index 000000000000..5ab7d7fe198c
--- /dev/null
+++ b/arch/powerpc/include/asm/Kbuild
@@ -0,0 +1,37 @@
+include include/asm-generic/Kbuild.asm
+
+header-y += auxvec.h
+header-y += ioctls.h
+header-y += sembuf.h
+header-y += siginfo.h
+header-y += stat.h
+header-y += errno.h
+header-y += ipcbuf.h
+header-y += msgbuf.h
+header-y += shmbuf.h
+header-y += socket.h
+header-y += termbits.h
+header-y += fcntl.h
+header-y += poll.h
+header-y += sockios.h
+header-y += ucontext.h
+header-y += ioctl.h
+header-y += linkage.h
+header-y += resource.h
+header-y += sigcontext.h
+header-y += statfs.h
+header-y += ps3fb.h
+
+unifdef-y += bootx.h
+unifdef-y += byteorder.h
+unifdef-y += cputable.h
+unifdef-y += elf.h
+unifdef-y += nvram.h
+unifdef-y += param.h
+unifdef-y += posix_types.h
+unifdef-y += seccomp.h
+unifdef-y += signal.h
+unifdef-y += spu_info.h
+unifdef-y += termios.h
+unifdef-y += types.h
+unifdef-y += unistd.h
diff --git a/include/asm-powerpc/a.out.h b/arch/powerpc/include/asm/a.out.h
index 89cead6b176e..89cead6b176e 100644
--- a/include/asm-powerpc/a.out.h
+++ b/arch/powerpc/include/asm/a.out.h
diff --git a/include/asm-powerpc/abs_addr.h b/arch/powerpc/include/asm/abs_addr.h
index 98324c5a8286..98324c5a8286 100644
--- a/include/asm-powerpc/abs_addr.h
+++ b/arch/powerpc/include/asm/abs_addr.h
diff --git a/include/asm-powerpc/agp.h b/arch/powerpc/include/asm/agp.h
index 86455c4c31ee..86455c4c31ee 100644
--- a/include/asm-powerpc/agp.h
+++ b/arch/powerpc/include/asm/agp.h
diff --git a/include/asm-powerpc/asm-compat.h b/arch/powerpc/include/asm/asm-compat.h
index 8f0fe7971949..8f0fe7971949 100644
--- a/include/asm-powerpc/asm-compat.h
+++ b/arch/powerpc/include/asm/asm-compat.h
diff --git a/include/asm-powerpc/atomic.h b/arch/powerpc/include/asm/atomic.h
index f3fc733758f5..f3fc733758f5 100644
--- a/include/asm-powerpc/atomic.h
+++ b/arch/powerpc/include/asm/atomic.h
diff --git a/include/asm-powerpc/auxvec.h b/arch/powerpc/include/asm/auxvec.h
index 19a099b62cd6..19a099b62cd6 100644
--- a/include/asm-powerpc/auxvec.h
+++ b/arch/powerpc/include/asm/auxvec.h
diff --git a/include/asm-powerpc/backlight.h b/arch/powerpc/include/asm/backlight.h
index 8cf5c37c3817..8cf5c37c3817 100644
--- a/include/asm-powerpc/backlight.h
+++ b/arch/powerpc/include/asm/backlight.h
diff --git a/include/asm-powerpc/bitops.h b/arch/powerpc/include/asm/bitops.h
index 897eade3afbe..897eade3afbe 100644
--- a/include/asm-powerpc/bitops.h
+++ b/arch/powerpc/include/asm/bitops.h
diff --git a/include/asm-powerpc/bootx.h b/arch/powerpc/include/asm/bootx.h
index 57b82e3f89ce..57b82e3f89ce 100644
--- a/include/asm-powerpc/bootx.h
+++ b/arch/powerpc/include/asm/bootx.h
diff --git a/include/asm-powerpc/btext.h b/arch/powerpc/include/asm/btext.h
index 906f46e31006..906f46e31006 100644
--- a/include/asm-powerpc/btext.h
+++ b/arch/powerpc/include/asm/btext.h
diff --git a/include/asm-powerpc/bug.h b/arch/powerpc/include/asm/bug.h
index e55d1f66b86f..e55d1f66b86f 100644
--- a/include/asm-powerpc/bug.h
+++ b/arch/powerpc/include/asm/bug.h
diff --git a/include/asm-powerpc/bugs.h b/arch/powerpc/include/asm/bugs.h
index 42fdb73e3068..42fdb73e3068 100644
--- a/include/asm-powerpc/bugs.h
+++ b/arch/powerpc/include/asm/bugs.h
diff --git a/include/asm-powerpc/byteorder.h b/arch/powerpc/include/asm/byteorder.h
index b37752214a16..b37752214a16 100644
--- a/include/asm-powerpc/byteorder.h
+++ b/arch/powerpc/include/asm/byteorder.h
diff --git a/include/asm-powerpc/cache.h b/arch/powerpc/include/asm/cache.h
index 81de6eb3455d..81de6eb3455d 100644
--- a/include/asm-powerpc/cache.h
+++ b/arch/powerpc/include/asm/cache.h
diff --git a/include/asm-powerpc/cacheflush.h b/arch/powerpc/include/asm/cacheflush.h
index ba667a383b8c..ba667a383b8c 100644
--- a/include/asm-powerpc/cacheflush.h
+++ b/arch/powerpc/include/asm/cacheflush.h
diff --git a/include/asm-powerpc/cell-pmu.h b/arch/powerpc/include/asm/cell-pmu.h
index 8066eede3a0c..8066eede3a0c 100644
--- a/include/asm-powerpc/cell-pmu.h
+++ b/arch/powerpc/include/asm/cell-pmu.h
diff --git a/include/asm-powerpc/cell-regs.h b/arch/powerpc/include/asm/cell-regs.h
index fd6fd00434ef..fd6fd00434ef 100644
--- a/include/asm-powerpc/cell-regs.h
+++ b/arch/powerpc/include/asm/cell-regs.h
diff --git a/include/asm-powerpc/checksum.h b/arch/powerpc/include/asm/checksum.h
index 7cdf358337cf..7cdf358337cf 100644
--- a/include/asm-powerpc/checksum.h
+++ b/arch/powerpc/include/asm/checksum.h
diff --git a/include/asm-powerpc/clk_interface.h b/arch/powerpc/include/asm/clk_interface.h
index ab1882c1e176..ab1882c1e176 100644
--- a/include/asm-powerpc/clk_interface.h
+++ b/arch/powerpc/include/asm/clk_interface.h
diff --git a/include/asm-powerpc/code-patching.h b/arch/powerpc/include/asm/code-patching.h
index 107d9b915e33..107d9b915e33 100644
--- a/include/asm-powerpc/code-patching.h
+++ b/arch/powerpc/include/asm/code-patching.h
diff --git a/include/asm-powerpc/compat.h b/arch/powerpc/include/asm/compat.h
index d811a8cd7b58..d811a8cd7b58 100644
--- a/include/asm-powerpc/compat.h
+++ b/arch/powerpc/include/asm/compat.h
diff --git a/include/asm-powerpc/cpm.h b/arch/powerpc/include/asm/cpm.h
index 63a55337c2de..24d79e3abd8e 100644
--- a/include/asm-powerpc/cpm.h
+++ b/arch/powerpc/include/asm/cpm.h
@@ -3,6 +3,7 @@
 
 #include <linux/compiler.h>
 #include <linux/types.h>
+#include <linux/of.h>
 
 /* Opcodes common to CPM1 and CPM2
 */
@@ -100,4 +101,6 @@ unsigned long cpm_muram_offset(void __iomem *addr);
 dma_addr_t cpm_muram_dma(void __iomem *addr);
 int cpm_command(u32 command, u8 opcode);
 
+int cpm2_gpiochip_add32(struct device_node *np);
+
 #endif
diff --git a/include/asm-powerpc/cpm1.h b/arch/powerpc/include/asm/cpm1.h
index 2ff798744c1d..2ff798744c1d 100644
--- a/include/asm-powerpc/cpm1.h
+++ b/arch/powerpc/include/asm/cpm1.h
diff --git a/include/asm-powerpc/cpm2.h b/arch/powerpc/include/asm/cpm2.h
index 2c7fd9cee291..0f5e8ff59a85 100644
--- a/include/asm-powerpc/cpm2.h
+++ b/arch/powerpc/include/asm/cpm2.h
@@ -12,6 +12,7 @@
 
 #include <asm/immap_cpm2.h>
 #include <asm/cpm.h>
+#include <sysdev/fsl_soc.h>
 
 #ifdef CONFIG_PPC_85xx
 #define CPM_MAP_ADDR (get_immrbase() + 0x80000)
@@ -93,10 +94,40 @@ extern cpm_cpm2_t __iomem *cpmp; /* Pointer to comm processor */
 #define cpm_dpfree cpm_muram_free
 #define cpm_dpram_addr cpm_muram_addr
 
-extern void cpm_setbrg(uint brg, uint rate);
-extern void cpm2_fastbrg(uint brg, uint rate, int div16);
 extern void cpm2_reset(void);
 
+/* Baud rate generators.
+*/
+#define CPM_BRG_RST		((uint)0x00020000)
+#define CPM_BRG_EN		((uint)0x00010000)
+#define CPM_BRG_EXTC_INT	((uint)0x00000000)
+#define CPM_BRG_EXTC_CLK3_9	((uint)0x00004000)
+#define CPM_BRG_EXTC_CLK5_15	((uint)0x00008000)
+#define CPM_BRG_ATB		((uint)0x00002000)
+#define CPM_BRG_CD_MASK		((uint)0x00001ffe)
+#define CPM_BRG_DIV16		((uint)0x00000001)
+
+#define CPM2_BRG_INT_CLK	(get_brgfreq())
+#define CPM2_BRG_UART_CLK	(CPM2_BRG_INT_CLK/16)
+
+extern void __cpm2_setbrg(uint brg, uint rate, uint clk, int div16, int src);
+
+/* This function is used by UARTS, or anything else that uses a 16x
+ * oversampled clock.
+ */
+static inline void cpm_setbrg(uint brg, uint rate)
+{
+	__cpm2_setbrg(brg, rate, CPM2_BRG_UART_CLK, 0, CPM_BRG_EXTC_INT);
+}
+
+/* This function is used to set high speed synchronous baud rate
+ * clocks.
+ */
+static inline void cpm2_fastbrg(uint brg, uint rate, int div16)
+{
+	__cpm2_setbrg(brg, rate, CPM2_BRG_INT_CLK, div16, CPM_BRG_EXTC_INT);
+}
+
 /* Function code bits, usually generic to devices.
 */
 #define CPMFCR_GBL	((u_char)0x20)	/* Set memory snooping */
@@ -195,17 +226,6 @@ typedef struct smc_uart {
 #define SMCM_TX		((unsigned char)0x02)
 #define SMCM_RX		((unsigned char)0x01)
 
-/* Baud rate generators.
-*/
-#define CPM_BRG_RST		((uint)0x00020000)
-#define CPM_BRG_EN		((uint)0x00010000)
-#define CPM_BRG_EXTC_INT	((uint)0x00000000)
-#define CPM_BRG_EXTC_CLK3_9	((uint)0x00004000)
-#define CPM_BRG_EXTC_CLK5_15	((uint)0x00008000)
-#define CPM_BRG_ATB		((uint)0x00002000)
-#define CPM_BRG_CD_MASK		((uint)0x00001ffe)
-#define CPM_BRG_DIV16		((uint)0x00000001)
-
 /* SCCs.
 */
 #define SCC_GSMRH_IRP		((uint)0x00040000)
@@ -317,6 +337,11 @@ typedef struct scc_param {
 	uint	scc_tcrc;	/* Internal */
 } sccp_t;
 
+/* Function code bits.
+*/
+#define SCC_EB	((u_char) 0x10)	/* Set big endian byte order */
+#define SCC_GBL	((u_char) 0x20) /* Snooping enabled */
+
 /* CPM Ethernet through SCC1.
  */
 typedef struct scc_enet {
diff --git a/include/asm-powerpc/cputable.h b/arch/powerpc/include/asm/cputable.h
index 2a3e9075a5a0..ef8a248dfd55 100644
--- a/include/asm-powerpc/cputable.h
+++ b/arch/powerpc/include/asm/cputable.h
@@ -127,6 +127,8 @@ extern struct cpu_spec *identify_cpu(unsigned long offset, unsigned int pvr);
 extern void do_feature_fixups(unsigned long value, void *fixup_start,
 			      void *fixup_end);
 
+extern const char *powerpc_base_platform;
+
 #endif /* __ASSEMBLY__ */
 
 /* CPU kernel features */
diff --git a/include/asm-powerpc/cputhreads.h b/arch/powerpc/include/asm/cputhreads.h
index fb11b0c459b8..fb11b0c459b8 100644
--- a/include/asm-powerpc/cputhreads.h
+++ b/arch/powerpc/include/asm/cputhreads.h
diff --git a/include/asm-powerpc/cputime.h b/arch/powerpc/include/asm/cputime.h
index f42e623030ee..f42e623030ee 100644
--- a/include/asm-powerpc/cputime.h
+++ b/arch/powerpc/include/asm/cputime.h
diff --git a/include/asm-powerpc/current.h b/arch/powerpc/include/asm/current.h
index e2c7f06931e7..e2c7f06931e7 100644
--- a/include/asm-powerpc/current.h
+++ b/arch/powerpc/include/asm/current.h
diff --git a/include/asm-powerpc/dbdma.h b/arch/powerpc/include/asm/dbdma.h
index e23f07e73cb3..e23f07e73cb3 100644
--- a/include/asm-powerpc/dbdma.h
+++ b/arch/powerpc/include/asm/dbdma.h
diff --git a/include/asm-powerpc/dcr-generic.h b/arch/powerpc/include/asm/dcr-generic.h
index 35b71599ec46..35b71599ec46 100644
--- a/include/asm-powerpc/dcr-generic.h
+++ b/arch/powerpc/include/asm/dcr-generic.h
diff --git a/include/asm-powerpc/dcr-mmio.h b/arch/powerpc/include/asm/dcr-mmio.h
index acd491dbd45a..acd491dbd45a 100644
--- a/include/asm-powerpc/dcr-mmio.h
+++ b/arch/powerpc/include/asm/dcr-mmio.h
diff --git a/include/asm-powerpc/dcr-native.h b/arch/powerpc/include/asm/dcr-native.h
index 72d2b72c7390..72d2b72c7390 100644
--- a/include/asm-powerpc/dcr-native.h
+++ b/arch/powerpc/include/asm/dcr-native.h
diff --git a/include/asm-powerpc/dcr-regs.h b/arch/powerpc/include/asm/dcr-regs.h
index 29b0ecef980a..29b0ecef980a 100644
--- a/include/asm-powerpc/dcr-regs.h
+++ b/arch/powerpc/include/asm/dcr-regs.h
diff --git a/arch/powerpc/include/asm/dcr.h b/arch/powerpc/include/asm/dcr.h
new file mode 100644
index 000000000000..d13fb68bb5c0
--- /dev/null
+++ b/arch/powerpc/include/asm/dcr.h
@@ -0,0 +1,78 @@
+/*
+ * (c) Copyright 2006 Benjamin Herrenschmidt, IBM Corp.
+ *                    <benh@kernel.crashing.org>
+ *
+ *   This program is free software;  you can redistribute it and/or modify
+ *   it under the terms of the GNU General Public License as published by
+ *   the Free Software Foundation; either version 2 of the License, or
+ *   (at your option) any later version.
+ *
+ *   This program is distributed in the hope that it will be useful,
+ *   but WITHOUT ANY WARRANTY;  without even the implied warranty of
+ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See
+ *   the GNU General Public License for more details.
+ *
+ *   You should have received a copy of the GNU General Public License
+ *   along with this program;  if not, write to the Free Software
+ *   Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#ifndef _ASM_POWERPC_DCR_H
+#define _ASM_POWERPC_DCR_H
+#ifdef __KERNEL__
+#ifndef __ASSEMBLY__
+#ifdef CONFIG_PPC_DCR
+
+#ifdef CONFIG_PPC_DCR_NATIVE
+#include <asm/dcr-native.h>
+#endif
+
+#ifdef CONFIG_PPC_DCR_MMIO
+#include <asm/dcr-mmio.h>
+#endif
+
+
+/* Indirection layer for providing both NATIVE and MMIO support. */
+
+#if defined(CONFIG_PPC_DCR_NATIVE) && defined(CONFIG_PPC_DCR_MMIO)
+
+#include <asm/dcr-generic.h>
+
+#define DCR_MAP_OK(host)	dcr_map_ok_generic(host)
+#define dcr_map(dev, dcr_n, dcr_c) dcr_map_generic(dev, dcr_n, dcr_c)
+#define dcr_unmap(host, dcr_c) dcr_unmap_generic(host, dcr_c)
+#define dcr_read(host, dcr_n) dcr_read_generic(host, dcr_n)
+#define dcr_write(host, dcr_n, value) dcr_write_generic(host, dcr_n, value)
+
+#else
+
+#ifdef CONFIG_PPC_DCR_NATIVE
+typedef dcr_host_native_t dcr_host_t;
+#define DCR_MAP_OK(host)	dcr_map_ok_native(host)
+#define dcr_map(dev, dcr_n, dcr_c) dcr_map_native(dev, dcr_n, dcr_c)
+#define dcr_unmap(host, dcr_c) dcr_unmap_native(host, dcr_c)
+#define dcr_read(host, dcr_n) dcr_read_native(host, dcr_n)
+#define dcr_write(host, dcr_n, value) dcr_write_native(host, dcr_n, value)
+#else
+typedef dcr_host_mmio_t dcr_host_t;
+#define DCR_MAP_OK(host)	dcr_map_ok_mmio(host)
+#define dcr_map(dev, dcr_n, dcr_c) dcr_map_mmio(dev, dcr_n, dcr_c)
+#define dcr_unmap(host, dcr_c) dcr_unmap_mmio(host, dcr_c)
+#define dcr_read(host, dcr_n) dcr_read_mmio(host, dcr_n)
+#define dcr_write(host, dcr_n, value) dcr_write_mmio(host, dcr_n, value)
+#endif
+
+#endif /* defined(CONFIG_PPC_DCR_NATIVE) && defined(CONFIG_PPC_DCR_MMIO) */
+
+/*
+ * additional helpers to read the DCR * base from the device-tree
+ */
+struct device_node;
+extern unsigned int dcr_resource_start(struct device_node *np,
+				       unsigned int index);
+extern unsigned int dcr_resource_len(struct device_node *np,
+				     unsigned int index);
+#endif /* CONFIG_PPC_DCR */
+#endif /* __ASSEMBLY__ */
+#endif /* __KERNEL__ */
+#endif /* _ASM_POWERPC_DCR_H */
diff --git a/include/asm-powerpc/delay.h b/arch/powerpc/include/asm/delay.h
index f9200a65c632..f9200a65c632 100644
--- a/include/asm-powerpc/delay.h
+++ b/arch/powerpc/include/asm/delay.h
diff --git a/include/asm-powerpc/device.h b/arch/powerpc/include/asm/device.h
index 228ab2a315b9..228ab2a315b9 100644
--- a/include/asm-powerpc/device.h
+++ b/arch/powerpc/include/asm/device.h
diff --git a/include/asm-powerpc/div64.h b/arch/powerpc/include/asm/div64.h
index 6cd978cefb28..6cd978cefb28 100644
--- a/include/asm-powerpc/div64.h
+++ b/arch/powerpc/include/asm/div64.h
diff --git a/arch/powerpc/include/asm/dma-mapping.h b/arch/powerpc/include/asm/dma-mapping.h
new file mode 100644
index 000000000000..c7ca45f97dd2
--- /dev/null
+++ b/arch/powerpc/include/asm/dma-mapping.h
@@ -0,0 +1,474 @@
+/*
+ * Copyright (C) 2004 IBM
+ *
+ * Implements the generic device dma API for powerpc.
+ * the pci and vio busses
+ */
+#ifndef _ASM_DMA_MAPPING_H
+#define _ASM_DMA_MAPPING_H
+#ifdef __KERNEL__
+
+#include <linux/types.h>
+#include <linux/cache.h>
+/* need struct page definitions */
+#include <linux/mm.h>
+#include <linux/scatterlist.h>
+#include <linux/dma-attrs.h>
+#include <asm/io.h>
+
+#define DMA_ERROR_CODE		(~(dma_addr_t)0x0)
+
+#ifdef CONFIG_NOT_COHERENT_CACHE
+/*
+ * DMA-consistent mapping functions for PowerPCs that don't support
+ * cache snooping.  These allocate/free a region of uncached mapped
+ * memory space for use with DMA devices.  Alternatively, you could
+ * allocate the space "normally" and use the cache management functions
+ * to ensure it is consistent.
+ */
+extern void *__dma_alloc_coherent(size_t size, dma_addr_t *handle, gfp_t gfp);
+extern void __dma_free_coherent(size_t size, void *vaddr);
+extern void __dma_sync(void *vaddr, size_t size, int direction);
+extern void __dma_sync_page(struct page *page, unsigned long offset,
+				 size_t size, int direction);
+
+#else /* ! CONFIG_NOT_COHERENT_CACHE */
+/*
+ * Cache coherent cores.
+ */
+
+#define __dma_alloc_coherent(gfp, size, handle)	NULL
+#define __dma_free_coherent(size, addr)		((void)0)
+#define __dma_sync(addr, size, rw)		((void)0)
+#define __dma_sync_page(pg, off, sz, rw)	((void)0)
+
+#endif /* ! CONFIG_NOT_COHERENT_CACHE */
+
+#ifdef CONFIG_PPC64
+
+static inline unsigned long device_to_mask(struct device *dev)
+{
+	if (dev->dma_mask && *dev->dma_mask)
+		return *dev->dma_mask;
+	/* Assume devices without mask can take 32 bit addresses */
+	return 0xfffffffful;
+}
+
+/*
+ * DMA operations are abstracted for G5 vs. i/pSeries, PCI vs. VIO
+ */
+struct dma_mapping_ops {
+	void *		(*alloc_coherent)(struct device *dev, size_t size,
+				dma_addr_t *dma_handle, gfp_t flag);
+	void		(*free_coherent)(struct device *dev, size_t size,
+				void *vaddr, dma_addr_t dma_handle);
+	dma_addr_t	(*map_single)(struct device *dev, void *ptr,
+				size_t size, enum dma_data_direction direction,
+				struct dma_attrs *attrs);
+	void		(*unmap_single)(struct device *dev, dma_addr_t dma_addr,
+				size_t size, enum dma_data_direction direction,
+				struct dma_attrs *attrs);
+	int		(*map_sg)(struct device *dev, struct scatterlist *sg,
+				int nents, enum dma_data_direction direction,
+				struct dma_attrs *attrs);
+	void		(*unmap_sg)(struct device *dev, struct scatterlist *sg,
+				int nents, enum dma_data_direction direction,
+				struct dma_attrs *attrs);
+	int		(*dma_supported)(struct device *dev, u64 mask);
+	int		(*set_dma_mask)(struct device *dev, u64 dma_mask);
+};
+
+static inline struct dma_mapping_ops *get_dma_ops(struct device *dev)
+{
+	/* We don't handle the NULL dev case for ISA for now. We could
+	 * do it via an out of line call but it is not needed for now. The
+	 * only ISA DMA device we support is the floppy and we have a hack
+	 * in the floppy driver directly to get a device for us.
+	 */
+	if (unlikely(dev == NULL || dev->archdata.dma_ops == NULL))
+		return NULL;
+	return dev->archdata.dma_ops;
+}
+
+static inline void set_dma_ops(struct device *dev, struct dma_mapping_ops *ops)
+{
+	dev->archdata.dma_ops = ops;
+}
+
+static inline int dma_supported(struct device *dev, u64 mask)
+{
+	struct dma_mapping_ops *dma_ops = get_dma_ops(dev);
+
+	if (unlikely(dma_ops == NULL))
+		return 0;
+	if (dma_ops->dma_supported == NULL)
+		return 1;
+	return dma_ops->dma_supported(dev, mask);
+}
+
+/* We have our own implementation of pci_set_dma_mask() */
+#define HAVE_ARCH_PCI_SET_DMA_MASK
+
+static inline int dma_set_mask(struct device *dev, u64 dma_mask)
+{
+	struct dma_mapping_ops *dma_ops = get_dma_ops(dev);
+
+	if (unlikely(dma_ops == NULL))
+		return -EIO;
+	if (dma_ops->set_dma_mask != NULL)
+		return dma_ops->set_dma_mask(dev, dma_mask);
+	if (!dev->dma_mask || !dma_supported(dev, dma_mask))
+		return -EIO;
+	*dev->dma_mask = dma_mask;
+	return 0;
+}
+
+static inline dma_addr_t dma_map_single_attrs(struct device *dev,
+					      void *cpu_addr,
+					      size_t size,
+					      enum dma_data_direction direction,
+					      struct dma_attrs *attrs)
+{
+	struct dma_mapping_ops *dma_ops = get_dma_ops(dev);
+
+	BUG_ON(!dma_ops);
+	return dma_ops->map_single(dev, cpu_addr, size, direction, attrs);
+}
+
+static inline void dma_unmap_single_attrs(struct device *dev,
+					  dma_addr_t dma_addr,
+					  size_t size,
+					  enum dma_data_direction direction,
+					  struct dma_attrs *attrs)
+{
+	struct dma_mapping_ops *dma_ops = get_dma_ops(dev);
+
+	BUG_ON(!dma_ops);
+	dma_ops->unmap_single(dev, dma_addr, size, direction, attrs);
+}
+
+static inline dma_addr_t dma_map_page_attrs(struct device *dev,
+					    struct page *page,
+					    unsigned long offset, size_t size,
+					    enum dma_data_direction direction,
+					    struct dma_attrs *attrs)
+{
+	struct dma_mapping_ops *dma_ops = get_dma_ops(dev);
+
+	BUG_ON(!dma_ops);
+	return dma_ops->map_single(dev, page_address(page) + offset, size,
+			direction, attrs);
+}
+
+static inline void dma_unmap_page_attrs(struct device *dev,
+					dma_addr_t dma_address,
+					size_t size,
+					enum dma_data_direction direction,
+					struct dma_attrs *attrs)
+{
+	struct dma_mapping_ops *dma_ops = get_dma_ops(dev);
+
+	BUG_ON(!dma_ops);
+	dma_ops->unmap_single(dev, dma_address, size, direction, attrs);
+}
+
+static inline int dma_map_sg_attrs(struct device *dev, struct scatterlist *sg,
+				   int nents, enum dma_data_direction direction,
+				   struct dma_attrs *attrs)
+{
+	struct dma_mapping_ops *dma_ops = get_dma_ops(dev);
+
+	BUG_ON(!dma_ops);
+	return dma_ops->map_sg(dev, sg, nents, direction, attrs);
+}
+
+static inline void dma_unmap_sg_attrs(struct device *dev,
+				      struct scatterlist *sg,
+				      int nhwentries,
+				      enum dma_data_direction direction,
+				      struct dma_attrs *attrs)
+{
+	struct dma_mapping_ops *dma_ops = get_dma_ops(dev);
+
+	BUG_ON(!dma_ops);
+	dma_ops->unmap_sg(dev, sg, nhwentries, direction, attrs);
+}
+
+static inline void *dma_alloc_coherent(struct device *dev, size_t size,
+				       dma_addr_t *dma_handle, gfp_t flag)
+{
+	struct dma_mapping_ops *dma_ops = get_dma_ops(dev);
+
+	BUG_ON(!dma_ops);
+	return dma_ops->alloc_coherent(dev, size, dma_handle, flag);
+}
+
+static inline void dma_free_coherent(struct device *dev, size_t size,
+				     void *cpu_addr, dma_addr_t dma_handle)
+{
+	struct dma_mapping_ops *dma_ops = get_dma_ops(dev);
+
+	BUG_ON(!dma_ops);
+	dma_ops->free_coherent(dev, size, cpu_addr, dma_handle);
+}
+
+static inline dma_addr_t dma_map_single(struct device *dev, void *cpu_addr,
+					size_t size,
+					enum dma_data_direction direction)
+{
+	return dma_map_single_attrs(dev, cpu_addr, size, direction, NULL);
+}
+
+static inline void dma_unmap_single(struct device *dev, dma_addr_t dma_addr,
+				    size_t size,
+				    enum dma_data_direction direction)
+{
+	dma_unmap_single_attrs(dev, dma_addr, size, direction, NULL);
+}
+
+static inline dma_addr_t dma_map_page(struct device *dev, struct page *page,
+				      unsigned long offset, size_t size,
+				      enum dma_data_direction direction)
+{
+	return dma_map_page_attrs(dev, page, offset, size, direction, NULL);
+}
+
+static inline void dma_unmap_page(struct device *dev, dma_addr_t dma_address,
+				  size_t size,
+				  enum dma_data_direction direction)
+{
+	dma_unmap_page_attrs(dev, dma_address, size, direction, NULL);
+}
+
+static inline int dma_map_sg(struct device *dev, struct scatterlist *sg,
+			     int nents, enum dma_data_direction direction)
+{
+	return dma_map_sg_attrs(dev, sg, nents, direction, NULL);
+}
+
+static inline void dma_unmap_sg(struct device *dev, struct scatterlist *sg,
+				int nhwentries,
+				enum dma_data_direction direction)
+{
+	dma_unmap_sg_attrs(dev, sg, nhwentries, direction, NULL);
+}
+
+/*
+ * Available generic sets of operations
+ */
+extern struct dma_mapping_ops dma_iommu_ops;
+extern struct dma_mapping_ops dma_direct_ops;
+
+#else /* CONFIG_PPC64 */
+
+#define dma_supported(dev, mask)	(1)
+
+static inline int dma_set_mask(struct device *dev, u64 dma_mask)
+{
+	if (!dev->dma_mask || !dma_supported(dev, mask))
+		return -EIO;
+
+	*dev->dma_mask = dma_mask;
+
+	return 0;
+}
+
+static inline void *dma_alloc_coherent(struct device *dev, size_t size,
+				       dma_addr_t * dma_handle,
+				       gfp_t gfp)
+{
+#ifdef CONFIG_NOT_COHERENT_CACHE
+	return __dma_alloc_coherent(size, dma_handle, gfp);
+#else
+	void *ret;
+	/* ignore region specifiers */
+	gfp &= ~(__GFP_DMA | __GFP_HIGHMEM);
+
+	if (dev == NULL || dev->coherent_dma_mask < 0xffffffff)
+		gfp |= GFP_DMA;
+
+	ret = (void *)__get_free_pages(gfp, get_order(size));
+
+	if (ret != NULL) {
+		memset(ret, 0, size);
+		*dma_handle = virt_to_bus(ret);
+	}
+
+	return ret;
+#endif
+}
+
+static inline void
+dma_free_coherent(struct device *dev, size_t size, void *vaddr,
+		  dma_addr_t dma_handle)
+{
+#ifdef CONFIG_NOT_COHERENT_CACHE
+	__dma_free_coherent(size, vaddr);
+#else
+	free_pages((unsigned long)vaddr, get_order(size));
+#endif
+}
+
+static inline dma_addr_t
+dma_map_single(struct device *dev, void *ptr, size_t size,
+	       enum dma_data_direction direction)
+{
+	BUG_ON(direction == DMA_NONE);
+
+	__dma_sync(ptr, size, direction);
+
+	return virt_to_bus(ptr);
+}
+
+static inline void dma_unmap_single(struct device *dev, dma_addr_t dma_addr,
+				    size_t size,
+				    enum dma_data_direction direction)
+{
+	/* We do nothing. */
+}
+
+static inline dma_addr_t
+dma_map_page(struct device *dev, struct page *page,
+	     unsigned long offset, size_t size,
+	     enum dma_data_direction direction)
+{
+	BUG_ON(direction == DMA_NONE);
+
+	__dma_sync_page(page, offset, size, direction);
+
+	return page_to_bus(page) + offset;
+}
+
+static inline void dma_unmap_page(struct device *dev, dma_addr_t dma_address,
+				  size_t size,
+				  enum dma_data_direction direction)
+{
+	/* We do nothing. */
+}
+
+static inline int
+dma_map_sg(struct device *dev, struct scatterlist *sgl, int nents,
+	   enum dma_data_direction direction)
+{
+	struct scatterlist *sg;
+	int i;
+
+	BUG_ON(direction == DMA_NONE);
+
+	for_each_sg(sgl, sg, nents, i) {
+		BUG_ON(!sg_page(sg));
+		__dma_sync_page(sg_page(sg), sg->offset, sg->length, direction);
+		sg->dma_address = page_to_bus(sg_page(sg)) + sg->offset;
+	}
+
+	return nents;
+}
+
+static inline void dma_unmap_sg(struct device *dev, struct scatterlist *sg,
+				int nhwentries,
+				enum dma_data_direction direction)
+{
+	/* We don't do anything here. */
+}
+
+#endif /* CONFIG_PPC64 */
+
+static inline void dma_sync_single_for_cpu(struct device *dev,
+		dma_addr_t dma_handle, size_t size,
+		enum dma_data_direction direction)
+{
+	BUG_ON(direction == DMA_NONE);
+	__dma_sync(bus_to_virt(dma_handle), size, direction);
+}
+
+static inline void dma_sync_single_for_device(struct device *dev,
+		dma_addr_t dma_handle, size_t size,
+		enum dma_data_direction direction)
+{
+	BUG_ON(direction == DMA_NONE);
+	__dma_sync(bus_to_virt(dma_handle), size, direction);
+}
+
+static inline void dma_sync_sg_for_cpu(struct device *dev,
+		struct scatterlist *sgl, int nents,
+		enum dma_data_direction direction)
+{
+	struct scatterlist *sg;
+	int i;
+
+	BUG_ON(direction == DMA_NONE);
+
+	for_each_sg(sgl, sg, nents, i)
+		__dma_sync_page(sg_page(sg), sg->offset, sg->length, direction);
+}
+
+static inline void dma_sync_sg_for_device(struct device *dev,
+		struct scatterlist *sgl, int nents,
+		enum dma_data_direction direction)
+{
+	struct scatterlist *sg;
+	int i;
+
+	BUG_ON(direction == DMA_NONE);
+
+	for_each_sg(sgl, sg, nents, i)
+		__dma_sync_page(sg_page(sg), sg->offset, sg->length, direction);
+}
+
+static inline int dma_mapping_error(struct device *dev, dma_addr_t dma_addr)
+{
+#ifdef CONFIG_PPC64
+	return (dma_addr == DMA_ERROR_CODE);
+#else
+	return 0;
+#endif
+}
+
+#define dma_alloc_noncoherent(d, s, h, f) dma_alloc_coherent(d, s, h, f)
+#define dma_free_noncoherent(d, s, v, h) dma_free_coherent(d, s, v, h)
+#ifdef CONFIG_NOT_COHERENT_CACHE
+#define dma_is_consistent(d, h)	(0)
+#else
+#define dma_is_consistent(d, h)	(1)
+#endif
+
+static inline int dma_get_cache_alignment(void)
+{
+#ifdef CONFIG_PPC64
+	/* no easy way to get cache size on all processors, so return
+	 * the maximum possible, to be safe */
+	return (1 << INTERNODE_CACHE_SHIFT);
+#else
+	/*
+	 * Each processor family will define its own L1_CACHE_SHIFT,
+	 * L1_CACHE_BYTES wraps to this, so this is always safe.
+	 */
+	return L1_CACHE_BYTES;
+#endif
+}
+
+static inline void dma_sync_single_range_for_cpu(struct device *dev,
+		dma_addr_t dma_handle, unsigned long offset, size_t size,
+		enum dma_data_direction direction)
+{
+	/* just sync everything for now */
+	dma_sync_single_for_cpu(dev, dma_handle, offset + size, direction);
+}
+
+static inline void dma_sync_single_range_for_device(struct device *dev,
+		dma_addr_t dma_handle, unsigned long offset, size_t size,
+		enum dma_data_direction direction)
+{
+	/* just sync everything for now */
+	dma_sync_single_for_device(dev, dma_handle, offset + size, direction);
+}
+
+static inline void dma_cache_sync(struct device *dev, void *vaddr, size_t size,
+		enum dma_data_direction direction)
+{
+	BUG_ON(direction == DMA_NONE);
+	__dma_sync(vaddr, size, (int)direction);
+}
+
+#endif /* __KERNEL__ */
+#endif	/* _ASM_DMA_MAPPING_H */
diff --git a/include/asm-powerpc/dma.h b/arch/powerpc/include/asm/dma.h
index a7e06e25c708..a7e06e25c708 100644
--- a/include/asm-powerpc/dma.h
+++ b/arch/powerpc/include/asm/dma.h
diff --git a/include/asm-powerpc/edac.h b/arch/powerpc/include/asm/edac.h
index 6ead88bbfbb8..6ead88bbfbb8 100644
--- a/include/asm-powerpc/edac.h
+++ b/arch/powerpc/include/asm/edac.h
diff --git a/include/asm-powerpc/eeh.h b/arch/powerpc/include/asm/eeh.h
index b886bec67016..b886bec67016 100644
--- a/include/asm-powerpc/eeh.h
+++ b/arch/powerpc/include/asm/eeh.h
diff --git a/include/asm-powerpc/eeh_event.h b/arch/powerpc/include/asm/eeh_event.h
index cc3cb04539ac..cc3cb04539ac 100644
--- a/include/asm-powerpc/eeh_event.h
+++ b/arch/powerpc/include/asm/eeh_event.h
diff --git a/arch/powerpc/include/asm/elf.h b/arch/powerpc/include/asm/elf.h
new file mode 100644
index 000000000000..80d1f399ee51
--- /dev/null
+++ b/arch/powerpc/include/asm/elf.h
@@ -0,0 +1,424 @@
+#ifndef _ASM_POWERPC_ELF_H
+#define _ASM_POWERPC_ELF_H
+
+#ifdef __KERNEL__
+#include <linux/sched.h>	/* for task_struct */
+#include <asm/page.h>
+#include <asm/string.h>
+#endif
+
+#include <asm/types.h>
+#include <asm/ptrace.h>
+#include <asm/cputable.h>
+#include <asm/auxvec.h>
+
+/* PowerPC relocations defined by the ABIs */
+#define R_PPC_NONE		0
+#define R_PPC_ADDR32		1	/* 32bit absolute address */
+#define R_PPC_ADDR24		2	/* 26bit address, 2 bits ignored.  */
+#define R_PPC_ADDR16		3	/* 16bit absolute address */
+#define R_PPC_ADDR16_LO		4	/* lower 16bit of absolute address */
+#define R_PPC_ADDR16_HI		5	/* high 16bit of absolute address */
+#define R_PPC_ADDR16_HA		6	/* adjusted high 16bit */
+#define R_PPC_ADDR14		7	/* 16bit address, 2 bits ignored */
+#define R_PPC_ADDR14_BRTAKEN	8
+#define R_PPC_ADDR14_BRNTAKEN	9
+#define R_PPC_REL24		10	/* PC relative 26 bit */
+#define R_PPC_REL14		11	/* PC relative 16 bit */
+#define R_PPC_REL14_BRTAKEN	12
+#define R_PPC_REL14_BRNTAKEN	13
+#define R_PPC_GOT16		14
+#define R_PPC_GOT16_LO		15
+#define R_PPC_GOT16_HI		16
+#define R_PPC_GOT16_HA		17
+#define R_PPC_PLTREL24		18
+#define R_PPC_COPY		19
+#define R_PPC_GLOB_DAT		20
+#define R_PPC_JMP_SLOT		21
+#define R_PPC_RELATIVE		22
+#define R_PPC_LOCAL24PC		23
+#define R_PPC_UADDR32		24
+#define R_PPC_UADDR16		25
+#define R_PPC_REL32		26
+#define R_PPC_PLT32		27
+#define R_PPC_PLTREL32		28
+#define R_PPC_PLT16_LO		29
+#define R_PPC_PLT16_HI		30
+#define R_PPC_PLT16_HA		31
+#define R_PPC_SDAREL16		32
+#define R_PPC_SECTOFF		33
+#define R_PPC_SECTOFF_LO	34
+#define R_PPC_SECTOFF_HI	35
+#define R_PPC_SECTOFF_HA	36
+
+/* PowerPC relocations defined for the TLS access ABI.  */
+#define R_PPC_TLS		67 /* none	(sym+add)@tls */
+#define R_PPC_DTPMOD32		68 /* word32	(sym+add)@dtpmod */
+#define R_PPC_TPREL16		69 /* half16*	(sym+add)@tprel */
+#define R_PPC_TPREL16_LO	70 /* half16	(sym+add)@tprel@l */
+#define R_PPC_TPREL16_HI	71 /* half16	(sym+add)@tprel@h */
+#define R_PPC_TPREL16_HA	72 /* half16	(sym+add)@tprel@ha */
+#define R_PPC_TPREL32		73 /* word32	(sym+add)@tprel */
+#define R_PPC_DTPREL16		74 /* half16*	(sym+add)@dtprel */
+#define R_PPC_DTPREL16_LO	75 /* half16	(sym+add)@dtprel@l */
+#define R_PPC_DTPREL16_HI	76 /* half16	(sym+add)@dtprel@h */
+#define R_PPC_DTPREL16_HA	77 /* half16	(sym+add)@dtprel@ha */
+#define R_PPC_DTPREL32		78 /* word32	(sym+add)@dtprel */
+#define R_PPC_GOT_TLSGD16	79 /* half16*	(sym+add)@got@tlsgd */
+#define R_PPC_GOT_TLSGD16_LO	80 /* half16	(sym+add)@got@tlsgd@l */
+#define R_PPC_GOT_TLSGD16_HI	81 /* half16	(sym+add)@got@tlsgd@h */
+#define R_PPC_GOT_TLSGD16_HA	82 /* half16	(sym+add)@got@tlsgd@ha */
+#define R_PPC_GOT_TLSLD16	83 /* half16*	(sym+add)@got@tlsld */
+#define R_PPC_GOT_TLSLD16_LO	84 /* half16	(sym+add)@got@tlsld@l */
+#define R_PPC_GOT_TLSLD16_HI	85 /* half16	(sym+add)@got@tlsld@h */
+#define R_PPC_GOT_TLSLD16_HA	86 /* half16	(sym+add)@got@tlsld@ha */
+#define R_PPC_GOT_TPREL16	87 /* half16*	(sym+add)@got@tprel */
+#define R_PPC_GOT_TPREL16_LO	88 /* half16	(sym+add)@got@tprel@l */
+#define R_PPC_GOT_TPREL16_HI	89 /* half16	(sym+add)@got@tprel@h */
+#define R_PPC_GOT_TPREL16_HA	90 /* half16	(sym+add)@got@tprel@ha */
+#define R_PPC_GOT_DTPREL16	91 /* half16*	(sym+add)@got@dtprel */
+#define R_PPC_GOT_DTPREL16_LO	92 /* half16*	(sym+add)@got@dtprel@l */
+#define R_PPC_GOT_DTPREL16_HI	93 /* half16*	(sym+add)@got@dtprel@h */
+#define R_PPC_GOT_DTPREL16_HA	94 /* half16*	(sym+add)@got@dtprel@ha */
+
+/* keep this the last entry. */
+#define R_PPC_NUM		95
+
+/*
+ * ELF register definitions..
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#define ELF_NGREG	48	/* includes nip, msr, lr, etc. */
+#define ELF_NFPREG	33	/* includes fpscr */
+
+typedef unsigned long elf_greg_t64;
+typedef elf_greg_t64 elf_gregset_t64[ELF_NGREG];
+
+typedef unsigned int elf_greg_t32;
+typedef elf_greg_t32 elf_gregset_t32[ELF_NGREG];
+typedef elf_gregset_t32 compat_elf_gregset_t;
+
+/*
+ * ELF_ARCH, CLASS, and DATA are used to set parameters in the core dumps.
+ */
+#ifdef __powerpc64__
+# define ELF_NVRREG32	33	/* includes vscr & vrsave stuffed together */
+# define ELF_NVRREG	34	/* includes vscr & vrsave in split vectors */
+# define ELF_NVSRHALFREG 32	/* Half the vsx registers */
+# define ELF_GREG_TYPE	elf_greg_t64
+#else
+# define ELF_NEVRREG	34	/* includes acc (as 2) */
+# define ELF_NVRREG	33	/* includes vscr */
+# define ELF_GREG_TYPE	elf_greg_t32
+# define ELF_ARCH	EM_PPC
+# define ELF_CLASS	ELFCLASS32
+# define ELF_DATA	ELFDATA2MSB
+#endif /* __powerpc64__ */
+
+#ifndef ELF_ARCH
+# define ELF_ARCH	EM_PPC64
+# define ELF_CLASS	ELFCLASS64
+# define ELF_DATA	ELFDATA2MSB
+  typedef elf_greg_t64 elf_greg_t;
+  typedef elf_gregset_t64 elf_gregset_t;
+#else
+  /* Assumption: ELF_ARCH == EM_PPC and ELF_CLASS == ELFCLASS32 */
+  typedef elf_greg_t32 elf_greg_t;
+  typedef elf_gregset_t32 elf_gregset_t;
+#endif /* ELF_ARCH */
+
+/* Floating point registers */
+typedef double elf_fpreg_t;
+typedef elf_fpreg_t elf_fpregset_t[ELF_NFPREG];
+
+/* Altivec registers */
+/*
+ * The entries with indexes 0-31 contain the corresponding vector registers. 
+ * The entry with index 32 contains the vscr as the last word (offset 12) 
+ * within the quadword.  This allows the vscr to be stored as either a 
+ * quadword (since it must be copied via a vector register to/from storage) 
+ * or as a word.  
+ *
+ * 64-bit kernel notes: The entry at index 33 contains the vrsave as the first  
+ * word (offset 0) within the quadword.
+ *
+ * This definition of the VMX state is compatible with the current PPC32 
+ * ptrace interface.  This allows signal handling and ptrace to use the same 
+ * structures.  This also simplifies the implementation of a bi-arch 
+ * (combined (32- and 64-bit) gdb.
+ *
+ * Note that it's _not_ compatible with 32 bits ucontext which stuffs the
+ * vrsave along with vscr and so only uses 33 vectors for the register set
+ */
+typedef __vector128 elf_vrreg_t;
+typedef elf_vrreg_t elf_vrregset_t[ELF_NVRREG];
+#ifdef __powerpc64__
+typedef elf_vrreg_t elf_vrregset_t32[ELF_NVRREG32];
+typedef elf_fpreg_t elf_vsrreghalf_t32[ELF_NVSRHALFREG];
+#endif
+
+#ifdef __KERNEL__
+/*
+ * This is used to ensure we don't load something for the wrong architecture.
+ */
+#define elf_check_arch(x) ((x)->e_machine == ELF_ARCH)
+#define compat_elf_check_arch(x)	((x)->e_machine == EM_PPC)
+
+#define USE_ELF_CORE_DUMP
+#define CORE_DUMP_USE_REGSET
+#define ELF_EXEC_PAGESIZE	PAGE_SIZE
+
+/* This is the location that an ET_DYN program is loaded if exec'ed.  Typical
+   use of this is to invoke "./ld.so someprog" to test out a new version of
+   the loader.  We need to make sure that it is out of the way of the program
+   that it will "exec", and that there is sufficient room for the brk.  */
+
+#define ELF_ET_DYN_BASE         (0x20000000)
+
+/*
+ * Our registers are always unsigned longs, whether we're a 32 bit
+ * process or 64 bit, on either a 64 bit or 32 bit kernel.
+ *
+ * This macro relies on elf_regs[i] having the right type to truncate to,
+ * either u32 or u64.  It defines the body of the elf_core_copy_regs
+ * function, either the native one with elf_gregset_t elf_regs or
+ * the 32-bit one with elf_gregset_t32 elf_regs.
+ */
+#define PPC_ELF_CORE_COPY_REGS(elf_regs, regs) \
+	int i, nregs = min(sizeof(*regs) / sizeof(unsigned long), \
+			   (size_t)ELF_NGREG);			  \
+	for (i = 0; i < nregs; i++) \
+		elf_regs[i] = ((unsigned long *) regs)[i]; \
+	memset(&elf_regs[i], 0, (ELF_NGREG - i) * sizeof(elf_regs[0]))
+
+/* Common routine for both 32-bit and 64-bit native processes */
+static inline void ppc_elf_core_copy_regs(elf_gregset_t elf_regs,
+					  struct pt_regs *regs)
+{
+	PPC_ELF_CORE_COPY_REGS(elf_regs, regs);
+}
+#define ELF_CORE_COPY_REGS(gregs, regs) ppc_elf_core_copy_regs(gregs, regs);
+
+typedef elf_vrregset_t elf_fpxregset_t;
+
+/* ELF_HWCAP yields a mask that user programs can use to figure out what
+   instruction set this cpu supports.  This could be done in userspace,
+   but it's not easy, and we've already done it here.  */
+# define ELF_HWCAP	(cur_cpu_spec->cpu_user_features)
+
+/* This yields a string that ld.so will use to load implementation
+   specific libraries for optimization.  This is more specific in
+   intent than poking at uname or /proc/cpuinfo.  */
+
+#define ELF_PLATFORM	(cur_cpu_spec->platform)
+
+/* While ELF_PLATFORM indicates the ISA supported by the platform, it
+ * may not accurately reflect the underlying behavior of the hardware
+ * (as in the case of running in Power5+ compatibility mode on a
+ * Power6 machine).  ELF_BASE_PLATFORM allows ld.so to load libraries
+ * that are tuned for the real hardware.
+ */
+#define ELF_BASE_PLATFORM (powerpc_base_platform)
+
+#ifdef __powerpc64__
+# define ELF_PLAT_INIT(_r, load_addr)	do {	\
+	_r->gpr[2] = load_addr; 		\
+} while (0)
+#endif /* __powerpc64__ */
+
+#ifdef __powerpc64__
+# define SET_PERSONALITY(ex, ibcs2)				\
+do {								\
+	unsigned long new_flags = 0;				\
+	if ((ex).e_ident[EI_CLASS] == ELFCLASS32)		\
+		new_flags = _TIF_32BIT;				\
+	if ((current_thread_info()->flags & _TIF_32BIT)		\
+	    != new_flags)					\
+		set_thread_flag(TIF_ABI_PENDING);		\
+	else							\
+		clear_thread_flag(TIF_ABI_PENDING);		\
+	if (personality(current->personality) != PER_LINUX32)	\
+		set_personality(PER_LINUX |			\
+			(current->personality & (~PER_MASK)));	\
+} while (0)
+/*
+ * An executable for which elf_read_implies_exec() returns TRUE will
+ * have the READ_IMPLIES_EXEC personality flag set automatically. This
+ * is only required to work around bugs in old 32bit toolchains. Since
+ * the 64bit ABI has never had these issues dont enable the workaround
+ * even if we have an executable stack.
+ */
+# define elf_read_implies_exec(ex, exec_stk) (test_thread_flag(TIF_32BIT) ? \
+		(exec_stk != EXSTACK_DISABLE_X) : 0)
+#else 
+# define SET_PERSONALITY(ex, ibcs2) set_personality((ibcs2)?PER_SVR4:PER_LINUX)
+#endif /* __powerpc64__ */
+
+extern int dcache_bsize;
+extern int icache_bsize;
+extern int ucache_bsize;
+
+/* vDSO has arch_setup_additional_pages */
+#define ARCH_HAS_SETUP_ADDITIONAL_PAGES
+struct linux_binprm;
+extern int arch_setup_additional_pages(struct linux_binprm *bprm,
+				       int executable_stack);
+#define VDSO_AUX_ENT(a,b) NEW_AUX_ENT(a,b);
+
+#endif /* __KERNEL__ */
+
+/*
+ * The requirements here are:
+ * - keep the final alignment of sp (sp & 0xf)
+ * - make sure the 32-bit value at the first 16 byte aligned position of
+ *   AUXV is greater than 16 for glibc compatibility.
+ *   AT_IGNOREPPC is used for that.
+ * - for compatibility with glibc ARCH_DLINFO must always be defined on PPC,
+ *   even if DLINFO_ARCH_ITEMS goes to zero or is undefined.
+ * update AT_VECTOR_SIZE_ARCH if the number of NEW_AUX_ENT entries changes
+ */
+#define ARCH_DLINFO							\
+do {									\
+	/* Handle glibc compatibility. */				\
+	NEW_AUX_ENT(AT_IGNOREPPC, AT_IGNOREPPC);			\
+	NEW_AUX_ENT(AT_IGNOREPPC, AT_IGNOREPPC);			\
+	/* Cache size items */						\
+	NEW_AUX_ENT(AT_DCACHEBSIZE, dcache_bsize);			\
+	NEW_AUX_ENT(AT_ICACHEBSIZE, icache_bsize);			\
+	NEW_AUX_ENT(AT_UCACHEBSIZE, ucache_bsize);			\
+	VDSO_AUX_ENT(AT_SYSINFO_EHDR, current->mm->context.vdso_base)	\
+} while (0)
+
+/* PowerPC64 relocations defined by the ABIs */
+#define R_PPC64_NONE    R_PPC_NONE
+#define R_PPC64_ADDR32  R_PPC_ADDR32  /* 32bit absolute address.  */
+#define R_PPC64_ADDR24  R_PPC_ADDR24  /* 26bit address, word aligned.  */
+#define R_PPC64_ADDR16  R_PPC_ADDR16  /* 16bit absolute address. */
+#define R_PPC64_ADDR16_LO R_PPC_ADDR16_LO /* lower 16bits of abs. address.  */
+#define R_PPC64_ADDR16_HI R_PPC_ADDR16_HI /* high 16bits of abs. address. */
+#define R_PPC64_ADDR16_HA R_PPC_ADDR16_HA /* adjusted high 16bits.  */
+#define R_PPC64_ADDR14 R_PPC_ADDR14   /* 16bit address, word aligned.  */
+#define R_PPC64_ADDR14_BRTAKEN  R_PPC_ADDR14_BRTAKEN
+#define R_PPC64_ADDR14_BRNTAKEN R_PPC_ADDR14_BRNTAKEN
+#define R_PPC64_REL24   R_PPC_REL24 /* PC relative 26 bit, word aligned.  */
+#define R_PPC64_REL14   R_PPC_REL14 /* PC relative 16 bit. */
+#define R_PPC64_REL14_BRTAKEN   R_PPC_REL14_BRTAKEN
+#define R_PPC64_REL14_BRNTAKEN  R_PPC_REL14_BRNTAKEN
+#define R_PPC64_GOT16     R_PPC_GOT16
+#define R_PPC64_GOT16_LO  R_PPC_GOT16_LO
+#define R_PPC64_GOT16_HI  R_PPC_GOT16_HI
+#define R_PPC64_GOT16_HA  R_PPC_GOT16_HA
+
+#define R_PPC64_COPY      R_PPC_COPY
+#define R_PPC64_GLOB_DAT  R_PPC_GLOB_DAT
+#define R_PPC64_JMP_SLOT  R_PPC_JMP_SLOT
+#define R_PPC64_RELATIVE  R_PPC_RELATIVE
+
+#define R_PPC64_UADDR32   R_PPC_UADDR32
+#define R_PPC64_UADDR16   R_PPC_UADDR16
+#define R_PPC64_REL32     R_PPC_REL32
+#define R_PPC64_PLT32     R_PPC_PLT32
+#define R_PPC64_PLTREL32  R_PPC_PLTREL32
+#define R_PPC64_PLT16_LO  R_PPC_PLT16_LO
+#define R_PPC64_PLT16_HI  R_PPC_PLT16_HI
+#define R_PPC64_PLT16_HA  R_PPC_PLT16_HA
+
+#define R_PPC64_SECTOFF     R_PPC_SECTOFF
+#define R_PPC64_SECTOFF_LO  R_PPC_SECTOFF_LO
+#define R_PPC64_SECTOFF_HI  R_PPC_SECTOFF_HI
+#define R_PPC64_SECTOFF_HA  R_PPC_SECTOFF_HA
+#define R_PPC64_ADDR30          37  /* word30 (S + A - P) >> 2.  */
+#define R_PPC64_ADDR64          38  /* doubleword64 S + A.  */
+#define R_PPC64_ADDR16_HIGHER   39  /* half16 #higher(S + A).  */
+#define R_PPC64_ADDR16_HIGHERA  40  /* half16 #highera(S + A).  */
+#define R_PPC64_ADDR16_HIGHEST  41  /* half16 #highest(S + A).  */
+#define R_PPC64_ADDR16_HIGHESTA 42  /* half16 #highesta(S + A). */
+#define R_PPC64_UADDR64     43  /* doubleword64 S + A.  */
+#define R_PPC64_REL64       44  /* doubleword64 S + A - P.  */
+#define R_PPC64_PLT64       45  /* doubleword64 L + A.  */
+#define R_PPC64_PLTREL64    46  /* doubleword64 L + A - P.  */
+#define R_PPC64_TOC16       47  /* half16* S + A - .TOC.  */
+#define R_PPC64_TOC16_LO    48  /* half16 #lo(S + A - .TOC.).  */
+#define R_PPC64_TOC16_HI    49  /* half16 #hi(S + A - .TOC.).  */
+#define R_PPC64_TOC16_HA    50  /* half16 #ha(S + A - .TOC.).  */
+#define R_PPC64_TOC         51  /* doubleword64 .TOC. */
+#define R_PPC64_PLTGOT16    52  /* half16* M + A.  */
+#define R_PPC64_PLTGOT16_LO 53  /* half16 #lo(M + A).  */
+#define R_PPC64_PLTGOT16_HI 54  /* half16 #hi(M + A).  */
+#define R_PPC64_PLTGOT16_HA 55  /* half16 #ha(M + A).  */
+
+#define R_PPC64_ADDR16_DS      56 /* half16ds* (S + A) >> 2.  */
+#define R_PPC64_ADDR16_LO_DS   57 /* half16ds  #lo(S + A) >> 2.  */
+#define R_PPC64_GOT16_DS       58 /* half16ds* (G + A) >> 2.  */
+#define R_PPC64_GOT16_LO_DS    59 /* half16ds  #lo(G + A) >> 2.  */
+#define R_PPC64_PLT16_LO_DS    60 /* half16ds  #lo(L + A) >> 2.  */
+#define R_PPC64_SECTOFF_DS     61 /* half16ds* (R + A) >> 2.  */
+#define R_PPC64_SECTOFF_LO_DS  62 /* half16ds  #lo(R + A) >> 2.  */
+#define R_PPC64_TOC16_DS       63 /* half16ds* (S + A - .TOC.) >> 2.  */
+#define R_PPC64_TOC16_LO_DS    64 /* half16ds  #lo(S + A - .TOC.) >> 2.  */
+#define R_PPC64_PLTGOT16_DS    65 /* half16ds* (M + A) >> 2.  */
+#define R_PPC64_PLTGOT16_LO_DS 66 /* half16ds  #lo(M + A) >> 2.  */
+
+/* PowerPC64 relocations defined for the TLS access ABI.  */
+#define R_PPC64_TLS		67 /* none	(sym+add)@tls */
+#define R_PPC64_DTPMOD64	68 /* doubleword64 (sym+add)@dtpmod */
+#define R_PPC64_TPREL16		69 /* half16*	(sym+add)@tprel */
+#define R_PPC64_TPREL16_LO	70 /* half16	(sym+add)@tprel@l */
+#define R_PPC64_TPREL16_HI	71 /* half16	(sym+add)@tprel@h */
+#define R_PPC64_TPREL16_HA	72 /* half16	(sym+add)@tprel@ha */
+#define R_PPC64_TPREL64		73 /* doubleword64 (sym+add)@tprel */
+#define R_PPC64_DTPREL16	74 /* half16*	(sym+add)@dtprel */
+#define R_PPC64_DTPREL16_LO	75 /* half16	(sym+add)@dtprel@l */
+#define R_PPC64_DTPREL16_HI	76 /* half16	(sym+add)@dtprel@h */
+#define R_PPC64_DTPREL16_HA	77 /* half16	(sym+add)@dtprel@ha */
+#define R_PPC64_DTPREL64	78 /* doubleword64 (sym+add)@dtprel */
+#define R_PPC64_GOT_TLSGD16	79 /* half16*	(sym+add)@got@tlsgd */
+#define R_PPC64_GOT_TLSGD16_LO	80 /* half16	(sym+add)@got@tlsgd@l */
+#define R_PPC64_GOT_TLSGD16_HI	81 /* half16	(sym+add)@got@tlsgd@h */
+#define R_PPC64_GOT_TLSGD16_HA	82 /* half16	(sym+add)@got@tlsgd@ha */
+#define R_PPC64_GOT_TLSLD16	83 /* half16*	(sym+add)@got@tlsld */
+#define R_PPC64_GOT_TLSLD16_LO	84 /* half16	(sym+add)@got@tlsld@l */
+#define R_PPC64_GOT_TLSLD16_HI	85 /* half16	(sym+add)@got@tlsld@h */
+#define R_PPC64_GOT_TLSLD16_HA	86 /* half16	(sym+add)@got@tlsld@ha */
+#define R_PPC64_GOT_TPREL16_DS	87 /* half16ds*	(sym+add)@got@tprel */
+#define R_PPC64_GOT_TPREL16_LO_DS 88 /* half16ds (sym+add)@got@tprel@l */
+#define R_PPC64_GOT_TPREL16_HI	89 /* half16	(sym+add)@got@tprel@h */
+#define R_PPC64_GOT_TPREL16_HA	90 /* half16	(sym+add)@got@tprel@ha */
+#define R_PPC64_GOT_DTPREL16_DS	91 /* half16ds*	(sym+add)@got@dtprel */
+#define R_PPC64_GOT_DTPREL16_LO_DS 92 /* half16ds (sym+add)@got@dtprel@l */
+#define R_PPC64_GOT_DTPREL16_HI	93 /* half16	(sym+add)@got@dtprel@h */
+#define R_PPC64_GOT_DTPREL16_HA	94 /* half16	(sym+add)@got@dtprel@ha */
+#define R_PPC64_TPREL16_DS	95 /* half16ds*	(sym+add)@tprel */
+#define R_PPC64_TPREL16_LO_DS	96 /* half16ds	(sym+add)@tprel@l */
+#define R_PPC64_TPREL16_HIGHER	97 /* half16	(sym+add)@tprel@higher */
+#define R_PPC64_TPREL16_HIGHERA	98 /* half16	(sym+add)@tprel@highera */
+#define R_PPC64_TPREL16_HIGHEST	99 /* half16	(sym+add)@tprel@highest */
+#define R_PPC64_TPREL16_HIGHESTA 100 /* half16	(sym+add)@tprel@highesta */
+#define R_PPC64_DTPREL16_DS	101 /* half16ds* (sym+add)@dtprel */
+#define R_PPC64_DTPREL16_LO_DS	102 /* half16ds	(sym+add)@dtprel@l */
+#define R_PPC64_DTPREL16_HIGHER	103 /* half16	(sym+add)@dtprel@higher */
+#define R_PPC64_DTPREL16_HIGHERA 104 /* half16	(sym+add)@dtprel@highera */
+#define R_PPC64_DTPREL16_HIGHEST 105 /* half16	(sym+add)@dtprel@highest */
+#define R_PPC64_DTPREL16_HIGHESTA 106 /* half16	(sym+add)@dtprel@highesta */
+
+/* Keep this the last entry.  */
+#define R_PPC64_NUM		107
+
+#ifdef  __KERNEL__
+
+#ifdef CONFIG_SPU_BASE
+/* Notes used in ET_CORE. Note name is "SPU/<fd>/<filename>". */
+#define NT_SPU		1
+
+#define ARCH_HAVE_EXTRA_ELF_NOTES
+
+#endif /* CONFIG_SPU_BASE */
+
+#endif /* __KERNEL */
+
+#endif /* _ASM_POWERPC_ELF_H */
diff --git a/include/asm-powerpc/emergency-restart.h b/arch/powerpc/include/asm/emergency-restart.h
index 3711bd9d50bd..3711bd9d50bd 100644
--- a/include/asm-powerpc/emergency-restart.h
+++ b/arch/powerpc/include/asm/emergency-restart.h
diff --git a/include/asm-powerpc/errno.h b/arch/powerpc/include/asm/errno.h
index 8c145fd17d86..8c145fd17d86 100644
--- a/include/asm-powerpc/errno.h
+++ b/arch/powerpc/include/asm/errno.h
diff --git a/include/asm-powerpc/exception.h b/arch/powerpc/include/asm/exception.h
index 329148b5acc6..329148b5acc6 100644
--- a/include/asm-powerpc/exception.h
+++ b/arch/powerpc/include/asm/exception.h
diff --git a/include/asm-powerpc/fb.h b/arch/powerpc/include/asm/fb.h
index 411af8d17a69..411af8d17a69 100644
--- a/include/asm-powerpc/fb.h
+++ b/arch/powerpc/include/asm/fb.h
diff --git a/include/asm-powerpc/fcntl.h b/arch/powerpc/include/asm/fcntl.h
index ce5c4516d404..ce5c4516d404 100644
--- a/include/asm-powerpc/fcntl.h
+++ b/arch/powerpc/include/asm/fcntl.h
diff --git a/include/asm-powerpc/feature-fixups.h b/arch/powerpc/include/asm/feature-fixups.h
index a1029967620b..a1029967620b 100644
--- a/include/asm-powerpc/feature-fixups.h
+++ b/arch/powerpc/include/asm/feature-fixups.h
diff --git a/include/asm-powerpc/firmware.h b/arch/powerpc/include/asm/firmware.h
index ef328995ba9d..3a179827528d 100644
--- a/include/asm-powerpc/firmware.h
+++ b/arch/powerpc/include/asm/firmware.h
@@ -46,6 +46,7 @@
 #define FW_FEATURE_PS3_LV1	ASM_CONST(0x0000000000800000)
 #define FW_FEATURE_BEAT		ASM_CONST(0x0000000001000000)
 #define FW_FEATURE_BULK_REMOVE	ASM_CONST(0x0000000002000000)
+#define FW_FEATURE_CMO		ASM_CONST(0x0000000004000000)
 
 #ifndef __ASSEMBLY__
 
@@ -58,7 +59,7 @@ enum {
 		FW_FEATURE_MIGRATE | FW_FEATURE_PERFMON | FW_FEATURE_CRQ |
 		FW_FEATURE_VIO | FW_FEATURE_RDMA | FW_FEATURE_LLAN |
 		FW_FEATURE_BULK | FW_FEATURE_XDABR | FW_FEATURE_MULTITCE |
-		FW_FEATURE_SPLPAR | FW_FEATURE_LPAR,
+		FW_FEATURE_SPLPAR | FW_FEATURE_LPAR | FW_FEATURE_CMO,
 	FW_FEATURE_PSERIES_ALWAYS = 0,
 	FW_FEATURE_ISERIES_POSSIBLE = FW_FEATURE_ISERIES | FW_FEATURE_LPAR,
 	FW_FEATURE_ISERIES_ALWAYS = FW_FEATURE_ISERIES | FW_FEATURE_LPAR,
diff --git a/include/asm-powerpc/fixmap.h b/arch/powerpc/include/asm/fixmap.h
index 8428b38a3d30..8428b38a3d30 100644
--- a/include/asm-powerpc/fixmap.h
+++ b/arch/powerpc/include/asm/fixmap.h
diff --git a/include/asm-powerpc/floppy.h b/arch/powerpc/include/asm/floppy.h
index 24bd34c57e9d..24bd34c57e9d 100644
--- a/include/asm-powerpc/floppy.h
+++ b/arch/powerpc/include/asm/floppy.h
diff --git a/include/asm-powerpc/fs_pd.h b/arch/powerpc/include/asm/fs_pd.h
index 9361cd5342cc..9361cd5342cc 100644
--- a/include/asm-powerpc/fs_pd.h
+++ b/arch/powerpc/include/asm/fs_pd.h
diff --git a/include/asm-powerpc/fsl_gtm.h b/arch/powerpc/include/asm/fsl_gtm.h
index 8e8c9b5032d3..8e8c9b5032d3 100644
--- a/include/asm-powerpc/fsl_gtm.h
+++ b/arch/powerpc/include/asm/fsl_gtm.h
diff --git a/include/asm-powerpc/fsl_lbc.h b/arch/powerpc/include/asm/fsl_lbc.h
index 303f5484c050..303f5484c050 100644
--- a/include/asm-powerpc/fsl_lbc.h
+++ b/arch/powerpc/include/asm/fsl_lbc.h
diff --git a/include/asm-powerpc/ftrace.h b/arch/powerpc/include/asm/ftrace.h
index de921326cca8..de921326cca8 100644
--- a/include/asm-powerpc/ftrace.h
+++ b/arch/powerpc/include/asm/ftrace.h
diff --git a/include/asm-powerpc/futex.h b/arch/powerpc/include/asm/futex.h
index 6d406c5c5de4..6d406c5c5de4 100644
--- a/include/asm-powerpc/futex.h
+++ b/arch/powerpc/include/asm/futex.h
diff --git a/arch/powerpc/include/asm/gpio.h b/arch/powerpc/include/asm/gpio.h
new file mode 100644
index 000000000000..ea04632399d8
--- /dev/null
+++ b/arch/powerpc/include/asm/gpio.h
@@ -0,0 +1,56 @@
+/*
+ * Generic GPIO API implementation for PowerPC.
+ *
+ * Copyright (c) 2007-2008  MontaVista Software, Inc.
+ *
+ * Author: Anton Vorontsov <avorontsov@ru.mvista.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef __ASM_POWERPC_GPIO_H
+#define __ASM_POWERPC_GPIO_H
+
+#include <linux/errno.h>
+#include <asm-generic/gpio.h>
+
+#ifdef CONFIG_GPIOLIB
+
+/*
+ * We don't (yet) implement inlined/rapid versions for on-chip gpios.
+ * Just call gpiolib.
+ */
+static inline int gpio_get_value(unsigned int gpio)
+{
+	return __gpio_get_value(gpio);
+}
+
+static inline void gpio_set_value(unsigned int gpio, int value)
+{
+	__gpio_set_value(gpio, value);
+}
+
+static inline int gpio_cansleep(unsigned int gpio)
+{
+	return __gpio_cansleep(gpio);
+}
+
+/*
+ * Not implemented, yet.
+ */
+static inline int gpio_to_irq(unsigned int gpio)
+{
+	return -ENOSYS;
+}
+
+static inline int irq_to_gpio(unsigned int irq)
+{
+	return -EINVAL;
+}
+
+#endif /* CONFIG_GPIOLIB */
+
+#endif /* __ASM_POWERPC_GPIO_H */
diff --git a/include/asm-powerpc/grackle.h b/arch/powerpc/include/asm/grackle.h
index bd7812a519d4..bd7812a519d4 100644
--- a/include/asm-powerpc/grackle.h
+++ b/arch/powerpc/include/asm/grackle.h
diff --git a/include/asm-powerpc/hardirq.h b/arch/powerpc/include/asm/hardirq.h
index 288e14d53b7f..288e14d53b7f 100644
--- a/include/asm-powerpc/hardirq.h
+++ b/arch/powerpc/include/asm/hardirq.h
diff --git a/include/asm-powerpc/heathrow.h b/arch/powerpc/include/asm/heathrow.h
index 93f54958a9d1..93f54958a9d1 100644
--- a/include/asm-powerpc/heathrow.h
+++ b/arch/powerpc/include/asm/heathrow.h
diff --git a/include/asm-powerpc/highmem.h b/arch/powerpc/include/asm/highmem.h
index 5d99b6489d56..5d99b6489d56 100644
--- a/include/asm-powerpc/highmem.h
+++ b/arch/powerpc/include/asm/highmem.h
diff --git a/include/asm-powerpc/hugetlb.h b/arch/powerpc/include/asm/hugetlb.h
index 26f0d0ab27a5..26f0d0ab27a5 100644
--- a/include/asm-powerpc/hugetlb.h
+++ b/arch/powerpc/include/asm/hugetlb.h
diff --git a/include/asm-powerpc/hvcall.h b/arch/powerpc/include/asm/hvcall.h
index bf6cd7cb996c..6251a4b10be7 100644
--- a/include/asm-powerpc/hvcall.h
+++ b/arch/powerpc/include/asm/hvcall.h
@@ -92,6 +92,11 @@
 #define H_EXACT			(1UL<<(63-24))	/* Use exact PTE or return H_PTEG_FULL */
 #define H_R_XLATE		(1UL<<(63-25))	/* include a valid logical page num in the pte if the valid bit is set */
 #define H_READ_4		(1UL<<(63-26))	/* Return 4 PTEs */
+#define H_PAGE_STATE_CHANGE	(1UL<<(63-28))
+#define H_PAGE_UNUSED		((1UL<<(63-29)) | (1UL<<(63-30)))
+#define H_PAGE_SET_UNUSED	(H_PAGE_STATE_CHANGE | H_PAGE_UNUSED)
+#define H_PAGE_SET_LOANED	(H_PAGE_SET_UNUSED | (1UL<<(63-31)))
+#define H_PAGE_SET_ACTIVE	H_PAGE_STATE_CHANGE
 #define H_AVPN			(1UL<<(63-32))	/* An avpn is provided as a sanity test */
 #define H_ANDCOND		(1UL<<(63-33))
 #define H_ICACHE_INVALIDATE	(1UL<<(63-40))	/* icbi, etc.  (ignored for IO pages) */
@@ -210,7 +215,9 @@
 #define H_JOIN			0x298
 #define H_VASI_STATE            0x2A4
 #define H_ENABLE_CRQ		0x2B0
-#define MAX_HCALL_OPCODE	H_ENABLE_CRQ
+#define H_SET_MPP		0x2D0
+#define H_GET_MPP		0x2D4
+#define MAX_HCALL_OPCODE	H_GET_MPP
 
 #ifndef __ASSEMBLY__
 
@@ -270,6 +277,42 @@ struct hcall_stats {
 };
 #define HCALL_STAT_ARRAY_SIZE	((MAX_HCALL_OPCODE >> 2) + 1)
 
+struct hvcall_mpp_data {
+	unsigned long entitled_mem;
+	unsigned long mapped_mem;
+	unsigned short group_num;
+	unsigned short pool_num;
+	unsigned char mem_weight;
+	unsigned char unallocated_mem_weight;
+	unsigned long unallocated_entitlement;  /* value in bytes */
+	unsigned long pool_size;
+	signed long loan_request;
+	unsigned long backing_mem;
+};
+
+int h_get_mpp(struct hvcall_mpp_data *);
+
+#ifdef CONFIG_PPC_PSERIES
+extern int CMO_PrPSP;
+extern int CMO_SecPSP;
+extern unsigned long CMO_PageSize;
+
+static inline int cmo_get_primary_psp(void)
+{
+	return CMO_PrPSP;
+}
+
+static inline int cmo_get_secondary_psp(void)
+{
+	return CMO_SecPSP;
+}
+
+static inline unsigned long cmo_get_page_size(void)
+{
+	return CMO_PageSize;
+}
+#endif /* CONFIG_PPC_PSERIES */
+
 #endif /* __ASSEMBLY__ */
 #endif /* __KERNEL__ */
 #endif /* _ASM_POWERPC_HVCALL_H */
diff --git a/include/asm-powerpc/hvconsole.h b/arch/powerpc/include/asm/hvconsole.h
index 35ea69e8121f..35ea69e8121f 100644
--- a/include/asm-powerpc/hvconsole.h
+++ b/arch/powerpc/include/asm/hvconsole.h
diff --git a/include/asm-powerpc/hvcserver.h b/arch/powerpc/include/asm/hvcserver.h
index 67d7da3a4da4..67d7da3a4da4 100644
--- a/include/asm-powerpc/hvcserver.h
+++ b/arch/powerpc/include/asm/hvcserver.h
diff --git a/include/asm-powerpc/hw_irq.h b/arch/powerpc/include/asm/hw_irq.h
index f75a5fc64d2e..f75a5fc64d2e 100644
--- a/include/asm-powerpc/hw_irq.h
+++ b/arch/powerpc/include/asm/hw_irq.h
diff --git a/include/asm-powerpc/hydra.h b/arch/powerpc/include/asm/hydra.h
index 1ad4eed07fbe..1ad4eed07fbe 100644
--- a/include/asm-powerpc/hydra.h
+++ b/arch/powerpc/include/asm/hydra.h
diff --git a/arch/powerpc/include/asm/i8259.h b/arch/powerpc/include/asm/i8259.h
new file mode 100644
index 000000000000..105ade297aad
--- /dev/null
+++ b/arch/powerpc/include/asm/i8259.h
@@ -0,0 +1,12 @@
+#ifndef _ASM_POWERPC_I8259_H
+#define _ASM_POWERPC_I8259_H
+#ifdef __KERNEL__
+
+#include <linux/irq.h>
+
+extern void i8259_init(struct device_node *node, unsigned long intack_addr);
+extern unsigned int i8259_irq(void);
+extern struct irq_host *i8259_get_host(void);
+
+#endif /* __KERNEL__ */
+#endif /* _ASM_POWERPC_I8259_H */
diff --git a/include/asm-powerpc/ibmebus.h b/arch/powerpc/include/asm/ibmebus.h
index 1a9d9aea21fa..1a9d9aea21fa 100644
--- a/include/asm-powerpc/ibmebus.h
+++ b/arch/powerpc/include/asm/ibmebus.h
diff --git a/arch/powerpc/include/asm/ide.h b/arch/powerpc/include/asm/ide.h
new file mode 100644
index 000000000000..da01b20aea59
--- /dev/null
+++ b/arch/powerpc/include/asm/ide.h
@@ -0,0 +1,17 @@
+/*
+ *  Copyright (C) 1994-1996 Linus Torvalds & authors
+ *
+ *  This file contains the powerpc architecture specific IDE code.
+ */
+#ifndef _ASM_POWERPC_IDE_H
+#define _ASM_POWERPC_IDE_H
+
+#include <linux/compiler.h>
+#include <asm/io.h>
+
+#define __ide_mm_insw(p, a, c)	readsw((void __iomem *)(p), (a), (c))
+#define __ide_mm_insl(p, a, c)	readsl((void __iomem *)(p), (a), (c))
+#define __ide_mm_outsw(p, a, c)	writesw((void __iomem *)(p), (a), (c))
+#define __ide_mm_outsl(p, a, c)	writesl((void __iomem *)(p), (a), (c))
+
+#endif /* _ASM_POWERPC_IDE_H */
diff --git a/include/asm-powerpc/immap_86xx.h b/arch/powerpc/include/asm/immap_86xx.h
index 0f165e59c326..0f165e59c326 100644
--- a/include/asm-powerpc/immap_86xx.h
+++ b/arch/powerpc/include/asm/immap_86xx.h
diff --git a/include/asm-powerpc/immap_cpm2.h b/arch/powerpc/include/asm/immap_cpm2.h
index 4080bab0468c..4080bab0468c 100644
--- a/include/asm-powerpc/immap_cpm2.h
+++ b/arch/powerpc/include/asm/immap_cpm2.h
diff --git a/include/asm-powerpc/immap_qe.h b/arch/powerpc/include/asm/immap_qe.h
index 7b6f411db3e6..3c2fced3ac22 100644
--- a/include/asm-powerpc/immap_qe.h
+++ b/arch/powerpc/include/asm/immap_qe.h
@@ -1,6 +1,4 @@
 /*
- * include/asm-powerpc/immap_qe.h
- *
  * QUICC Engine (QE) Internal Memory Map.
  * The Internal Memory Map for devices with QE on them. This
  * is the superset of all QE devices (8360, etc.).
diff --git a/include/asm-powerpc/io-defs.h b/arch/powerpc/include/asm/io-defs.h
index 44d7927aec69..44d7927aec69 100644
--- a/include/asm-powerpc/io-defs.h
+++ b/arch/powerpc/include/asm/io-defs.h
diff --git a/include/asm-powerpc/io.h b/arch/powerpc/include/asm/io.h
index 77c7fa025e65..77c7fa025e65 100644
--- a/include/asm-powerpc/io.h
+++ b/arch/powerpc/include/asm/io.h
diff --git a/include/asm-powerpc/ioctl.h b/arch/powerpc/include/asm/ioctl.h
index 57d68304218b..57d68304218b 100644
--- a/include/asm-powerpc/ioctl.h
+++ b/arch/powerpc/include/asm/ioctl.h
diff --git a/include/asm-powerpc/ioctls.h b/arch/powerpc/include/asm/ioctls.h
index 279a6229584b..279a6229584b 100644
--- a/include/asm-powerpc/ioctls.h
+++ b/arch/powerpc/include/asm/ioctls.h
diff --git a/include/asm-powerpc/iommu.h b/arch/powerpc/include/asm/iommu.h
index 51ecfef8d843..51ecfef8d843 100644
--- a/include/asm-powerpc/iommu.h
+++ b/arch/powerpc/include/asm/iommu.h
diff --git a/include/asm-powerpc/ipcbuf.h b/arch/powerpc/include/asm/ipcbuf.h
index 2c3e1d94db1d..2c3e1d94db1d 100644
--- a/include/asm-powerpc/ipcbuf.h
+++ b/arch/powerpc/include/asm/ipcbuf.h
diff --git a/include/asm-powerpc/ipic.h b/arch/powerpc/include/asm/ipic.h
index 8ff08be00146..fb59829983b8 100644
--- a/include/asm-powerpc/ipic.h
+++ b/arch/powerpc/include/asm/ipic.h
@@ -1,6 +1,4 @@
 /*
- * include/asm-powerpc/ipic.h
- *
  * IPIC external definitions and structure.
  *
  * Maintainer: Kumar Gala <galak@kernel.crashing.org>
@@ -79,15 +77,8 @@ extern void ipic_disable_mcp(enum ipic_mcp_irq mcp_irq);
 extern u32 ipic_get_mcp_status(void);
 extern void ipic_clear_mcp_status(u32 mask);
 
-#ifdef CONFIG_PPC_MERGE
 extern struct ipic * ipic_init(struct device_node *node, unsigned int flags);
 extern unsigned int ipic_get_irq(void);
-#else
-extern void ipic_init(phys_addr_t phys_addr, unsigned int flags,
-		unsigned int irq_offset,
-		unsigned char *senses, unsigned int senses_count);
-extern int ipic_get_irq(void);
-#endif
 
 #endif /* __ASM_IPIC_H__ */
 #endif /* __KERNEL__ */
diff --git a/arch/powerpc/include/asm/irq.h b/arch/powerpc/include/asm/irq.h
new file mode 100644
index 000000000000..a372f76836c2
--- /dev/null
+++ b/arch/powerpc/include/asm/irq.h
@@ -0,0 +1,366 @@
+#ifdef __KERNEL__
+#ifndef _ASM_POWERPC_IRQ_H
+#define _ASM_POWERPC_IRQ_H
+
+/*
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#include <linux/threads.h>
+#include <linux/list.h>
+#include <linux/radix-tree.h>
+
+#include <asm/types.h>
+#include <asm/atomic.h>
+
+
+#define get_irq_desc(irq) (&irq_desc[(irq)])
+
+/* Define a way to iterate across irqs. */
+#define for_each_irq(i) \
+	for ((i) = 0; (i) < NR_IRQS; ++(i))
+
+extern atomic_t ppc_n_lost_interrupts;
+
+/* This number is used when no interrupt has been assigned */
+#define NO_IRQ			(0)
+
+/* This is a special irq number to return from get_irq() to tell that
+ * no interrupt happened _and_ ignore it (don't count it as bad). Some
+ * platforms like iSeries rely on that.
+ */
+#define NO_IRQ_IGNORE		((unsigned int)-1)
+
+/* Total number of virq in the platform (make it a CONFIG_* option ? */
+#define NR_IRQS		512
+
+/* Number of irqs reserved for the legacy controller */
+#define NUM_ISA_INTERRUPTS	16
+
+/* This type is the placeholder for a hardware interrupt number. It has to
+ * be big enough to enclose whatever representation is used by a given
+ * platform.
+ */
+typedef unsigned long irq_hw_number_t;
+
+/* Interrupt controller "host" data structure. This could be defined as a
+ * irq domain controller. That is, it handles the mapping between hardware
+ * and virtual interrupt numbers for a given interrupt domain. The host
+ * structure is generally created by the PIC code for a given PIC instance
+ * (though a host can cover more than one PIC if they have a flat number
+ * model). It's the host callbacks that are responsible for setting the
+ * irq_chip on a given irq_desc after it's been mapped.
+ *
+ * The host code and data structures are fairly agnostic to the fact that
+ * we use an open firmware device-tree. We do have references to struct
+ * device_node in two places: in irq_find_host() to find the host matching
+ * a given interrupt controller node, and of course as an argument to its
+ * counterpart host->ops->match() callback. However, those are treated as
+ * generic pointers by the core and the fact that it's actually a device-node
+ * pointer is purely a convention between callers and implementation. This
+ * code could thus be used on other architectures by replacing those two
+ * by some sort of arch-specific void * "token" used to identify interrupt
+ * controllers.
+ */
+struct irq_host;
+struct radix_tree_root;
+
+/* Functions below are provided by the host and called whenever a new mapping
+ * is created or an old mapping is disposed. The host can then proceed to
+ * whatever internal data structures management is required. It also needs
+ * to setup the irq_desc when returning from map().
+ */
+struct irq_host_ops {
+	/* Match an interrupt controller device node to a host, returns
+	 * 1 on a match
+	 */
+	int (*match)(struct irq_host *h, struct device_node *node);
+
+	/* Create or update a mapping between a virtual irq number and a hw
+	 * irq number. This is called only once for a given mapping.
+	 */
+	int (*map)(struct irq_host *h, unsigned int virq, irq_hw_number_t hw);
+
+	/* Dispose of such a mapping */
+	void (*unmap)(struct irq_host *h, unsigned int virq);
+
+	/* Update of such a mapping  */
+	void (*remap)(struct irq_host *h, unsigned int virq, irq_hw_number_t hw);
+
+	/* Translate device-tree interrupt specifier from raw format coming
+	 * from the firmware to a irq_hw_number_t (interrupt line number) and
+	 * type (sense) that can be passed to set_irq_type(). In the absence
+	 * of this callback, irq_create_of_mapping() and irq_of_parse_and_map()
+	 * will return the hw number in the first cell and IRQ_TYPE_NONE for
+	 * the type (which amount to keeping whatever default value the
+	 * interrupt controller has for that line)
+	 */
+	int (*xlate)(struct irq_host *h, struct device_node *ctrler,
+		     u32 *intspec, unsigned int intsize,
+		     irq_hw_number_t *out_hwirq, unsigned int *out_type);
+};
+
+struct irq_host {
+	struct list_head	link;
+
+	/* type of reverse mapping technique */
+	unsigned int		revmap_type;
+#define IRQ_HOST_MAP_LEGACY     0 /* legacy 8259, gets irqs 1..15 */
+#define IRQ_HOST_MAP_NOMAP	1 /* no fast reverse mapping */
+#define IRQ_HOST_MAP_LINEAR	2 /* linear map of interrupts */
+#define IRQ_HOST_MAP_TREE	3 /* radix tree */
+	union {
+		struct {
+			unsigned int size;
+			unsigned int *revmap;
+		} linear;
+		struct radix_tree_root tree;
+	} revmap_data;
+	struct irq_host_ops	*ops;
+	void			*host_data;
+	irq_hw_number_t		inval_irq;
+
+	/* Optional device node pointer */
+	struct device_node	*of_node;
+};
+
+/* The main irq map itself is an array of NR_IRQ entries containing the
+ * associate host and irq number. An entry with a host of NULL is free.
+ * An entry can be allocated if it's free, the allocator always then sets
+ * hwirq first to the host's invalid irq number and then fills ops.
+ */
+struct irq_map_entry {
+	irq_hw_number_t	hwirq;
+	struct irq_host	*host;
+};
+
+extern struct irq_map_entry irq_map[NR_IRQS];
+
+extern irq_hw_number_t virq_to_hw(unsigned int virq);
+
+/**
+ * irq_alloc_host - Allocate a new irq_host data structure
+ * @of_node: optional device-tree node of the interrupt controller
+ * @revmap_type: type of reverse mapping to use
+ * @revmap_arg: for IRQ_HOST_MAP_LINEAR linear only: size of the map
+ * @ops: map/unmap host callbacks
+ * @inval_irq: provide a hw number in that host space that is always invalid
+ *
+ * Allocates and initialize and irq_host structure. Note that in the case of
+ * IRQ_HOST_MAP_LEGACY, the map() callback will be called before this returns
+ * for all legacy interrupts except 0 (which is always the invalid irq for
+ * a legacy controller). For a IRQ_HOST_MAP_LINEAR, the map is allocated by
+ * this call as well. For a IRQ_HOST_MAP_TREE, the radix tree will be allocated
+ * later during boot automatically (the reverse mapping will use the slow path
+ * until that happens).
+ */
+extern struct irq_host *irq_alloc_host(struct device_node *of_node,
+				       unsigned int revmap_type,
+				       unsigned int revmap_arg,
+				       struct irq_host_ops *ops,
+				       irq_hw_number_t inval_irq);
+
+
+/**
+ * irq_find_host - Locates a host for a given device node
+ * @node: device-tree node of the interrupt controller
+ */
+extern struct irq_host *irq_find_host(struct device_node *node);
+
+
+/**
+ * irq_set_default_host - Set a "default" host
+ * @host: default host pointer
+ *
+ * For convenience, it's possible to set a "default" host that will be used
+ * whenever NULL is passed to irq_create_mapping(). It makes life easier for
+ * platforms that want to manipulate a few hard coded interrupt numbers that
+ * aren't properly represented in the device-tree.
+ */
+extern void irq_set_default_host(struct irq_host *host);
+
+
+/**
+ * irq_set_virq_count - Set the maximum number of virt irqs
+ * @count: number of linux virtual irqs, capped with NR_IRQS
+ *
+ * This is mainly for use by platforms like iSeries who want to program
+ * the virtual irq number in the controller to avoid the reverse mapping
+ */
+extern void irq_set_virq_count(unsigned int count);
+
+
+/**
+ * irq_create_mapping - Map a hardware interrupt into linux virq space
+ * @host: host owning this hardware interrupt or NULL for default host
+ * @hwirq: hardware irq number in that host space
+ *
+ * Only one mapping per hardware interrupt is permitted. Returns a linux
+ * virq number.
+ * If the sense/trigger is to be specified, set_irq_type() should be called
+ * on the number returned from that call.
+ */
+extern unsigned int irq_create_mapping(struct irq_host *host,
+				       irq_hw_number_t hwirq);
+
+
+/**
+ * irq_dispose_mapping - Unmap an interrupt
+ * @virq: linux virq number of the interrupt to unmap
+ */
+extern void irq_dispose_mapping(unsigned int virq);
+
+/**
+ * irq_find_mapping - Find a linux virq from an hw irq number.
+ * @host: host owning this hardware interrupt
+ * @hwirq: hardware irq number in that host space
+ *
+ * This is a slow path, for use by generic code. It's expected that an
+ * irq controller implementation directly calls the appropriate low level
+ * mapping function.
+ */
+extern unsigned int irq_find_mapping(struct irq_host *host,
+				     irq_hw_number_t hwirq);
+
+/**
+ * irq_create_direct_mapping - Allocate a virq for direct mapping
+ * @host: host to allocate the virq for or NULL for default host
+ *
+ * This routine is used for irq controllers which can choose the hardware
+ * interrupt numbers they generate. In such a case it's simplest to use
+ * the linux virq as the hardware interrupt number.
+ */
+extern unsigned int irq_create_direct_mapping(struct irq_host *host);
+
+/**
+ * irq_radix_revmap - Find a linux virq from a hw irq number.
+ * @host: host owning this hardware interrupt
+ * @hwirq: hardware irq number in that host space
+ *
+ * This is a fast path, for use by irq controller code that uses radix tree
+ * revmaps
+ */
+extern unsigned int irq_radix_revmap(struct irq_host *host,
+				     irq_hw_number_t hwirq);
+
+/**
+ * irq_linear_revmap - Find a linux virq from a hw irq number.
+ * @host: host owning this hardware interrupt
+ * @hwirq: hardware irq number in that host space
+ *
+ * This is a fast path, for use by irq controller code that uses linear
+ * revmaps. It does fallback to the slow path if the revmap doesn't exist
+ * yet and will create the revmap entry with appropriate locking
+ */
+
+extern unsigned int irq_linear_revmap(struct irq_host *host,
+				      irq_hw_number_t hwirq);
+
+
+
+/**
+ * irq_alloc_virt - Allocate virtual irq numbers
+ * @host: host owning these new virtual irqs
+ * @count: number of consecutive numbers to allocate
+ * @hint: pass a hint number, the allocator will try to use a 1:1 mapping
+ *
+ * This is a low level function that is used internally by irq_create_mapping()
+ * and that can be used by some irq controllers implementations for things
+ * like allocating ranges of numbers for MSIs. The revmaps are left untouched.
+ */
+extern unsigned int irq_alloc_virt(struct irq_host *host,
+				   unsigned int count,
+				   unsigned int hint);
+
+/**
+ * irq_free_virt - Free virtual irq numbers
+ * @virq: virtual irq number of the first interrupt to free
+ * @count: number of interrupts to free
+ *
+ * This function is the opposite of irq_alloc_virt. It will not clear reverse
+ * maps, this should be done previously by unmap'ing the interrupt. In fact,
+ * all interrupts covered by the range being freed should have been unmapped
+ * prior to calling this.
+ */
+extern void irq_free_virt(unsigned int virq, unsigned int count);
+
+
+/* -- OF helpers -- */
+
+/* irq_create_of_mapping - Map a hardware interrupt into linux virq space
+ * @controller: Device node of the interrupt controller
+ * @inspec: Interrupt specifier from the device-tree
+ * @intsize: Size of the interrupt specifier from the device-tree
+ *
+ * This function is identical to irq_create_mapping except that it takes
+ * as input informations straight from the device-tree (typically the results
+ * of the of_irq_map_*() functions.
+ */
+extern unsigned int irq_create_of_mapping(struct device_node *controller,
+					  u32 *intspec, unsigned int intsize);
+
+
+/* irq_of_parse_and_map - Parse nad Map an interrupt into linux virq space
+ * @device: Device node of the device whose interrupt is to be mapped
+ * @index: Index of the interrupt to map
+ *
+ * This function is a wrapper that chains of_irq_map_one() and
+ * irq_create_of_mapping() to make things easier to callers
+ */
+extern unsigned int irq_of_parse_and_map(struct device_node *dev, int index);
+
+/* -- End OF helpers -- */
+
+/**
+ * irq_early_init - Init irq remapping subsystem
+ */
+extern void irq_early_init(void);
+
+static __inline__ int irq_canonicalize(int irq)
+{
+	return irq;
+}
+
+extern int distribute_irqs;
+
+struct irqaction;
+struct pt_regs;
+
+#define __ARCH_HAS_DO_SOFTIRQ
+
+#if defined(CONFIG_BOOKE) || defined(CONFIG_40x)
+/*
+ * Per-cpu stacks for handling critical, debug and machine check
+ * level interrupts.
+ */
+extern struct thread_info *critirq_ctx[NR_CPUS];
+extern struct thread_info *dbgirq_ctx[NR_CPUS];
+extern struct thread_info *mcheckirq_ctx[NR_CPUS];
+extern void exc_lvl_ctx_init(void);
+#else
+#define exc_lvl_ctx_init()
+#endif
+
+#ifdef CONFIG_IRQSTACKS
+/*
+ * Per-cpu stacks for handling hard and soft interrupts.
+ */
+extern struct thread_info *hardirq_ctx[NR_CPUS];
+extern struct thread_info *softirq_ctx[NR_CPUS];
+
+extern void irq_ctx_init(void);
+extern void call_do_softirq(struct thread_info *tp);
+extern int call_handle_irq(int irq, void *p1,
+			   struct thread_info *tp, void *func);
+#else
+#define irq_ctx_init()
+
+#endif /* CONFIG_IRQSTACKS */
+
+extern void do_IRQ(struct pt_regs *regs);
+
+#endif /* _ASM_IRQ_H */
+#endif /* __KERNEL__ */
diff --git a/include/asm-powerpc/irq_regs.h b/arch/powerpc/include/asm/irq_regs.h
index ba94b51a0a70..ba94b51a0a70 100644
--- a/include/asm-powerpc/irq_regs.h
+++ b/arch/powerpc/include/asm/irq_regs.h
diff --git a/arch/powerpc/include/asm/irqflags.h b/arch/powerpc/include/asm/irqflags.h
new file mode 100644
index 000000000000..5f68ecfdf516
--- /dev/null
+++ b/arch/powerpc/include/asm/irqflags.h
@@ -0,0 +1,43 @@
+/*
+ * IRQ flags handling
+ */
+#ifndef _ASM_IRQFLAGS_H
+#define _ASM_IRQFLAGS_H
+
+#ifndef __ASSEMBLY__
+/*
+ * Get definitions for raw_local_save_flags(x), etc.
+ */
+#include <asm/hw_irq.h>
+
+#else
+#ifdef CONFIG_TRACE_IRQFLAGS
+/*
+ * Most of the CPU's IRQ-state tracing is done from assembly code; we
+ * have to call a C function so call a wrapper that saves all the
+ * C-clobbered registers.
+ */
+#define TRACE_ENABLE_INTS	bl .trace_hardirqs_on
+#define TRACE_DISABLE_INTS	bl .trace_hardirqs_off
+#define TRACE_AND_RESTORE_IRQ_PARTIAL(en,skip)	\
+	cmpdi	en,0;				\
+	bne	95f;				\
+	stb	en,PACASOFTIRQEN(r13);		\
+	bl	.trace_hardirqs_off;		\
+	b	skip;				\
+95:	bl	.trace_hardirqs_on;		\
+	li	en,1;
+#define TRACE_AND_RESTORE_IRQ(en)		\
+	TRACE_AND_RESTORE_IRQ_PARTIAL(en,96f);	\
+	stb	en,PACASOFTIRQEN(r13);	        \
+96:
+#else
+#define TRACE_ENABLE_INTS
+#define TRACE_DISABLE_INTS
+#define TRACE_AND_RESTORE_IRQ_PARTIAL(en,skip)
+#define TRACE_AND_RESTORE_IRQ(en)		\
+	stb	en,PACASOFTIRQEN(r13)
+#endif
+#endif
+
+#endif
diff --git a/include/asm-powerpc/iseries/alpaca.h b/arch/powerpc/include/asm/iseries/alpaca.h
index c0cce6727a69..c0cce6727a69 100644
--- a/include/asm-powerpc/iseries/alpaca.h
+++ b/arch/powerpc/include/asm/iseries/alpaca.h
diff --git a/include/asm-powerpc/iseries/hv_call.h b/arch/powerpc/include/asm/iseries/hv_call.h
index 162d653ad51f..162d653ad51f 100644
--- a/include/asm-powerpc/iseries/hv_call.h
+++ b/arch/powerpc/include/asm/iseries/hv_call.h
diff --git a/include/asm-powerpc/iseries/hv_call_event.h b/arch/powerpc/include/asm/iseries/hv_call_event.h
index cc029d388e11..cc029d388e11 100644
--- a/include/asm-powerpc/iseries/hv_call_event.h
+++ b/arch/powerpc/include/asm/iseries/hv_call_event.h
diff --git a/include/asm-powerpc/iseries/hv_call_sc.h b/arch/powerpc/include/asm/iseries/hv_call_sc.h
index f5d210959250..f5d210959250 100644
--- a/include/asm-powerpc/iseries/hv_call_sc.h
+++ b/arch/powerpc/include/asm/iseries/hv_call_sc.h
diff --git a/include/asm-powerpc/iseries/hv_call_xm.h b/arch/powerpc/include/asm/iseries/hv_call_xm.h
index 392ac3f54df0..392ac3f54df0 100644
--- a/include/asm-powerpc/iseries/hv_call_xm.h
+++ b/arch/powerpc/include/asm/iseries/hv_call_xm.h
diff --git a/include/asm-powerpc/iseries/hv_lp_config.h b/arch/powerpc/include/asm/iseries/hv_lp_config.h
index a006fd1e4a2c..a006fd1e4a2c 100644
--- a/include/asm-powerpc/iseries/hv_lp_config.h
+++ b/arch/powerpc/include/asm/iseries/hv_lp_config.h
diff --git a/include/asm-powerpc/iseries/hv_lp_event.h b/arch/powerpc/include/asm/iseries/hv_lp_event.h
index 8f5da7d77202..8f5da7d77202 100644
--- a/include/asm-powerpc/iseries/hv_lp_event.h
+++ b/arch/powerpc/include/asm/iseries/hv_lp_event.h
diff --git a/include/asm-powerpc/iseries/hv_types.h b/arch/powerpc/include/asm/iseries/hv_types.h
index c3e6d2a1d1c3..c3e6d2a1d1c3 100644
--- a/include/asm-powerpc/iseries/hv_types.h
+++ b/arch/powerpc/include/asm/iseries/hv_types.h
diff --git a/include/asm-powerpc/iseries/iommu.h b/arch/powerpc/include/asm/iseries/iommu.h
index c59ee7e4bed1..c59ee7e4bed1 100644
--- a/include/asm-powerpc/iseries/iommu.h
+++ b/arch/powerpc/include/asm/iseries/iommu.h
diff --git a/include/asm-powerpc/iseries/it_lp_queue.h b/arch/powerpc/include/asm/iseries/it_lp_queue.h
index 428278838821..428278838821 100644
--- a/include/asm-powerpc/iseries/it_lp_queue.h
+++ b/arch/powerpc/include/asm/iseries/it_lp_queue.h
diff --git a/include/asm-powerpc/iseries/lpar_map.h b/arch/powerpc/include/asm/iseries/lpar_map.h
index 5e9f3e128ee2..5e9f3e128ee2 100644
--- a/include/asm-powerpc/iseries/lpar_map.h
+++ b/arch/powerpc/include/asm/iseries/lpar_map.h
diff --git a/include/asm-powerpc/iseries/mf.h b/arch/powerpc/include/asm/iseries/mf.h
index eb851a9c9e5c..eb851a9c9e5c 100644
--- a/include/asm-powerpc/iseries/mf.h
+++ b/arch/powerpc/include/asm/iseries/mf.h
diff --git a/include/asm-powerpc/iseries/vio.h b/arch/powerpc/include/asm/iseries/vio.h
index f9ac0d00b951..f9ac0d00b951 100644
--- a/include/asm-powerpc/iseries/vio.h
+++ b/arch/powerpc/include/asm/iseries/vio.h
diff --git a/include/asm-powerpc/kdebug.h b/arch/powerpc/include/asm/kdebug.h
index ae6d206728af..ae6d206728af 100644
--- a/include/asm-powerpc/kdebug.h
+++ b/arch/powerpc/include/asm/kdebug.h
diff --git a/include/asm-powerpc/kdump.h b/arch/powerpc/include/asm/kdump.h
index f6c93c716898..f6c93c716898 100644
--- a/include/asm-powerpc/kdump.h
+++ b/arch/powerpc/include/asm/kdump.h
diff --git a/arch/powerpc/include/asm/kexec.h b/arch/powerpc/include/asm/kexec.h
new file mode 100644
index 000000000000..3736d9b33289
--- /dev/null
+++ b/arch/powerpc/include/asm/kexec.h
@@ -0,0 +1,160 @@
+#ifndef _ASM_POWERPC_KEXEC_H
+#define _ASM_POWERPC_KEXEC_H
+#ifdef __KERNEL__
+
+/*
+ * Maximum page that is mapped directly into kernel memory.
+ * XXX: Since we copy virt we can use any page we allocate
+ */
+#define KEXEC_SOURCE_MEMORY_LIMIT (-1UL)
+
+/*
+ * Maximum address we can reach in physical address mode.
+ * XXX: I want to allow initrd in highmem. Otherwise set to rmo on LPAR.
+ */
+#define KEXEC_DESTINATION_MEMORY_LIMIT (-1UL)
+
+/* Maximum address we can use for the control code buffer */
+#ifdef __powerpc64__
+#define KEXEC_CONTROL_MEMORY_LIMIT (-1UL)
+#else
+/* TASK_SIZE, probably left over from use_mm ?? */
+#define KEXEC_CONTROL_MEMORY_LIMIT TASK_SIZE
+#endif
+
+#define KEXEC_CONTROL_PAGE_SIZE 4096
+
+/* The native architecture */
+#ifdef __powerpc64__
+#define KEXEC_ARCH KEXEC_ARCH_PPC64
+#else
+#define KEXEC_ARCH KEXEC_ARCH_PPC
+#endif
+
+#ifndef __ASSEMBLY__
+#include <linux/cpumask.h>
+
+typedef void (*crash_shutdown_t)(void);
+
+#ifdef CONFIG_KEXEC
+
+#ifdef __powerpc64__
+/*
+ * This function is responsible for capturing register states if coming
+ * via panic or invoking dump using sysrq-trigger.
+ */
+static inline void crash_setup_regs(struct pt_regs *newregs,
+					struct pt_regs *oldregs)
+{
+	if (oldregs)
+		memcpy(newregs, oldregs, sizeof(*newregs));
+	else {
+		/* FIXME Merge this with xmon_save_regs ?? */
+		unsigned long tmp1, tmp2;
+		__asm__ __volatile__ (
+			"std    0,0(%2)\n"
+			"std    1,8(%2)\n"
+			"std    2,16(%2)\n"
+			"std    3,24(%2)\n"
+			"std    4,32(%2)\n"
+			"std    5,40(%2)\n"
+			"std    6,48(%2)\n"
+			"std    7,56(%2)\n"
+			"std    8,64(%2)\n"
+			"std    9,72(%2)\n"
+			"std    10,80(%2)\n"
+			"std    11,88(%2)\n"
+			"std    12,96(%2)\n"
+			"std    13,104(%2)\n"
+			"std    14,112(%2)\n"
+			"std    15,120(%2)\n"
+			"std    16,128(%2)\n"
+			"std    17,136(%2)\n"
+			"std    18,144(%2)\n"
+			"std    19,152(%2)\n"
+			"std    20,160(%2)\n"
+			"std    21,168(%2)\n"
+			"std    22,176(%2)\n"
+			"std    23,184(%2)\n"
+			"std    24,192(%2)\n"
+			"std    25,200(%2)\n"
+			"std    26,208(%2)\n"
+			"std    27,216(%2)\n"
+			"std    28,224(%2)\n"
+			"std    29,232(%2)\n"
+			"std    30,240(%2)\n"
+			"std    31,248(%2)\n"
+			"mfmsr  %0\n"
+			"std    %0, 264(%2)\n"
+			"mfctr  %0\n"
+			"std    %0, 280(%2)\n"
+			"mflr   %0\n"
+			"std    %0, 288(%2)\n"
+			"bl     1f\n"
+		"1:     mflr   %1\n"
+			"std    %1, 256(%2)\n"
+			"mtlr   %0\n"
+			"mfxer  %0\n"
+			"std    %0, 296(%2)\n"
+			: "=&r" (tmp1), "=&r" (tmp2)
+			: "b" (newregs)
+			: "memory");
+	}
+}
+#else
+/*
+ * Provide a dummy definition to avoid build failures. Will remain
+ * empty till crash dump support is enabled.
+ */
+static inline void crash_setup_regs(struct pt_regs *newregs,
+					struct pt_regs *oldregs) { }
+#endif /* !__powerpc64 __ */
+
+extern void kexec_smp_wait(void);	/* get and clear naca physid, wait for
+					  master to copy new code to 0 */
+extern int crashing_cpu;
+extern void crash_send_ipi(void (*crash_ipi_callback)(struct pt_regs *));
+extern cpumask_t cpus_in_sr;
+static inline int kexec_sr_activated(int cpu)
+{
+	return cpu_isset(cpu,cpus_in_sr);
+}
+
+struct kimage;
+struct pt_regs;
+extern void default_machine_kexec(struct kimage *image);
+extern int default_machine_kexec_prepare(struct kimage *image);
+extern void default_machine_crash_shutdown(struct pt_regs *regs);
+extern int crash_shutdown_register(crash_shutdown_t handler);
+extern int crash_shutdown_unregister(crash_shutdown_t handler);
+
+extern void machine_kexec_simple(struct kimage *image);
+extern void crash_kexec_secondary(struct pt_regs *regs);
+extern int overlaps_crashkernel(unsigned long start, unsigned long size);
+extern void reserve_crashkernel(void);
+
+#else /* !CONFIG_KEXEC */
+static inline int kexec_sr_activated(int cpu) { return 0; }
+static inline void crash_kexec_secondary(struct pt_regs *regs) { }
+
+static inline int overlaps_crashkernel(unsigned long start, unsigned long size)
+{
+	return 0;
+}
+
+static inline void reserve_crashkernel(void) { ; }
+
+static inline int crash_shutdown_register(crash_shutdown_t handler)
+{
+	return 0;
+}
+
+static inline int crash_shutdown_unregister(crash_shutdown_t handler)
+{
+	return 0;
+}
+
+#endif /* CONFIG_KEXEC */
+#endif /* ! __ASSEMBLY__ */
+#endif /* __KERNEL__ */
+#endif /* _ASM_POWERPC_KEXEC_H */
diff --git a/include/asm-powerpc/keylargo.h b/arch/powerpc/include/asm/keylargo.h
index d8520ef121f9..d8520ef121f9 100644
--- a/include/asm-powerpc/keylargo.h
+++ b/arch/powerpc/include/asm/keylargo.h
diff --git a/arch/powerpc/include/asm/kgdb.h b/arch/powerpc/include/asm/kgdb.h
new file mode 100644
index 000000000000..edd217006d27
--- /dev/null
+++ b/arch/powerpc/include/asm/kgdb.h
@@ -0,0 +1,63 @@
+/*
+ * The PowerPC (32/64) specific defines / externs for KGDB.  Based on
+ * the previous 32bit and 64bit specific files, which had the following
+ * copyrights:
+ *
+ * PPC64 Mods (C) 2005 Frank Rowand (frowand@mvista.com)
+ * PPC Mods (C) 2004 Tom Rini (trini@mvista.com)
+ * PPC Mods (C) 2003 John Whitney (john.whitney@timesys.com)
+ * PPC Mods (C) 1998 Michael Tesch (tesch@cs.wisc.edu)
+ *
+ *
+ * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
+ * Author: Tom Rini <trini@kernel.crashing.org>
+ *
+ * 2006 (c) MontaVista Software, Inc. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+#ifdef __KERNEL__
+#ifndef __POWERPC_KGDB_H__
+#define __POWERPC_KGDB_H__
+
+#ifndef __ASSEMBLY__
+
+#define BREAK_INSTR_SIZE	4
+#define BUFMAX			((NUMREGBYTES * 2) + 512)
+#define OUTBUFMAX		((NUMREGBYTES * 2) + 512)
+static inline void arch_kgdb_breakpoint(void)
+{
+	asm(".long 0x7d821008"); /* twge r2, r2 */
+}
+#define CACHE_FLUSH_IS_SAFE	1
+
+/* The number bytes of registers we have to save depends on a few
+ * things.  For 64bit we default to not including vector registers and
+ * vector state registers. */
+#ifdef CONFIG_PPC64
+/*
+ * 64 bit (8 byte) registers:
+ *   32 gpr, 32 fpr, nip, msr, link, ctr
+ * 32 bit (4 byte) registers:
+ *   ccr, xer, fpscr
+ */
+#define NUMREGBYTES		((68 * 8) + (3 * 4))
+#define NUMCRITREGBYTES		184
+#else /* CONFIG_PPC32 */
+/* On non-E500 family PPC32 we determine the size by picking the last
+ * register we need, but on E500 we skip sections so we list what we
+ * need to store, and add it up. */
+#ifndef CONFIG_E500
+#define MAXREG			(PT_FPSCR+1)
+#else
+/* 32 GPRs (8 bytes), nip, msr, ccr, link, ctr, xer, acc (8 bytes), spefscr*/
+#define MAXREG                 ((32*2)+6+2+1)
+#endif
+#define NUMREGBYTES		(MAXREG * sizeof(int))
+/* CR/LR, R1, R2, R13-R31 inclusive. */
+#define NUMCRITREGBYTES		(23 * sizeof(int))
+#endif /* 32/64 */
+#endif /* !(__ASSEMBLY__) */
+#endif /* !__POWERPC_KGDB_H__ */
+#endif /* __KERNEL__ */
diff --git a/include/asm-powerpc/kmap_types.h b/arch/powerpc/include/asm/kmap_types.h
index b6bac6f61c16..b6bac6f61c16 100644
--- a/include/asm-powerpc/kmap_types.h
+++ b/arch/powerpc/include/asm/kmap_types.h
diff --git a/include/asm-powerpc/kprobes.h b/arch/powerpc/include/asm/kprobes.h
index d0e7701fa1f6..d0e7701fa1f6 100644
--- a/include/asm-powerpc/kprobes.h
+++ b/arch/powerpc/include/asm/kprobes.h
diff --git a/include/asm-powerpc/kvm.h b/arch/powerpc/include/asm/kvm.h
index f993e4198d5c..f993e4198d5c 100644
--- a/include/asm-powerpc/kvm.h
+++ b/arch/powerpc/include/asm/kvm.h
diff --git a/include/asm-powerpc/kvm_asm.h b/arch/powerpc/include/asm/kvm_asm.h
index 2197764796d9..2197764796d9 100644
--- a/include/asm-powerpc/kvm_asm.h
+++ b/arch/powerpc/include/asm/kvm_asm.h
diff --git a/include/asm-powerpc/kvm_host.h b/arch/powerpc/include/asm/kvm_host.h
index 2655e2a4831e..2655e2a4831e 100644
--- a/include/asm-powerpc/kvm_host.h
+++ b/arch/powerpc/include/asm/kvm_host.h
diff --git a/include/asm-powerpc/kvm_para.h b/arch/powerpc/include/asm/kvm_para.h
index 2d48f6a63d0b..2d48f6a63d0b 100644
--- a/include/asm-powerpc/kvm_para.h
+++ b/arch/powerpc/include/asm/kvm_para.h
diff --git a/include/asm-powerpc/kvm_ppc.h b/arch/powerpc/include/asm/kvm_ppc.h
index 5a21115228af..a8b068792260 100644
--- a/include/asm-powerpc/kvm_ppc.h
+++ b/arch/powerpc/include/asm/kvm_ppc.h
@@ -61,7 +61,8 @@ extern int kvmppc_emulate_mmio(struct kvm_run *run, struct kvm_vcpu *vcpu);
 
 extern void kvmppc_mmu_map(struct kvm_vcpu *vcpu, u64 gvaddr, gfn_t gfn,
                            u64 asid, u32 flags);
-extern void kvmppc_mmu_invalidate(struct kvm_vcpu *vcpu, u64 eaddr, u64 asid);
+extern void kvmppc_mmu_invalidate(struct kvm_vcpu *vcpu, gva_t eaddr,
+                                  gva_t eend, u32 asid);
 extern void kvmppc_mmu_priv_switch(struct kvm_vcpu *vcpu, int usermode);
 
 extern void kvmppc_check_and_deliver_interrupts(struct kvm_vcpu *vcpu);
diff --git a/include/asm-powerpc/libata-portmap.h b/arch/powerpc/include/asm/libata-portmap.h
index 4d8518049f4d..4d8518049f4d 100644
--- a/include/asm-powerpc/libata-portmap.h
+++ b/arch/powerpc/include/asm/libata-portmap.h
diff --git a/include/asm-powerpc/linkage.h b/arch/powerpc/include/asm/linkage.h
index e1c4ac1cc4ba..e1c4ac1cc4ba 100644
--- a/include/asm-powerpc/linkage.h
+++ b/arch/powerpc/include/asm/linkage.h
diff --git a/include/asm-powerpc/lmb.h b/arch/powerpc/include/asm/lmb.h
index 6f5fdf0a19ae..6f5fdf0a19ae 100644
--- a/include/asm-powerpc/lmb.h
+++ b/arch/powerpc/include/asm/lmb.h
diff --git a/include/asm-powerpc/local.h b/arch/powerpc/include/asm/local.h
index 612d83276653..612d83276653 100644
--- a/include/asm-powerpc/local.h
+++ b/arch/powerpc/include/asm/local.h
diff --git a/include/asm-powerpc/lppaca.h b/arch/powerpc/include/asm/lppaca.h
index 567ed92cd91f..2fe268b10333 100644
--- a/include/asm-powerpc/lppaca.h
+++ b/arch/powerpc/include/asm/lppaca.h
@@ -125,7 +125,10 @@ struct lppaca {
 	// NOTE: This value will ALWAYS be zero for dedicated processors and
 	// will NEVER be zero for shared processors (ie, initialized to a 1).
 	volatile u32 yield_count;	// PLIC increments each dispatchx00-x03
-	u8	reserved6[124];		// Reserved                     x04-x7F
+	u32 reserved6;
+	volatile u64 cmo_faults;	// CMO page fault count         x08-x0F
+	volatile u64 cmo_fault_time;	// CMO page fault time          x10-x17
+	u8	reserved7[104];		// Reserved                     x18-x7F
 
 //=============================================================================
 // CACHE_LINE_4-5 0x0180 - 0x027F Contains PMC interrupt data
diff --git a/include/asm-powerpc/lv1call.h b/arch/powerpc/include/asm/lv1call.h
index 81713acf7529..81713acf7529 100644
--- a/include/asm-powerpc/lv1call.h
+++ b/arch/powerpc/include/asm/lv1call.h
diff --git a/include/asm-powerpc/machdep.h b/arch/powerpc/include/asm/machdep.h
index 1233d735fd28..893aafd87fde 100644
--- a/include/asm-powerpc/machdep.h
+++ b/arch/powerpc/include/asm/machdep.h
@@ -76,7 +76,7 @@ struct machdep_calls {
 	 * destroyed as well */
 	void		(*hpte_clear_all)(void);
 
-	void		(*tce_build)(struct iommu_table * tbl,
+	int		(*tce_build)(struct iommu_table *tbl,
 				     long index,
 				     long npages,
 				     unsigned long uaddr,
diff --git a/include/asm-powerpc/macio.h b/arch/powerpc/include/asm/macio.h
index 079c06eae446..079c06eae446 100644
--- a/include/asm-powerpc/macio.h
+++ b/arch/powerpc/include/asm/macio.h
diff --git a/include/asm-powerpc/mc146818rtc.h b/arch/powerpc/include/asm/mc146818rtc.h
index f2741c8b59a1..f2741c8b59a1 100644
--- a/include/asm-powerpc/mc146818rtc.h
+++ b/arch/powerpc/include/asm/mc146818rtc.h
diff --git a/include/asm-powerpc/mediabay.h b/arch/powerpc/include/asm/mediabay.h
index b2efb3325808..b2efb3325808 100644
--- a/include/asm-powerpc/mediabay.h
+++ b/arch/powerpc/include/asm/mediabay.h
diff --git a/include/asm-powerpc/mman.h b/arch/powerpc/include/asm/mman.h
index 9209f755763e..9209f755763e 100644
--- a/include/asm-powerpc/mman.h
+++ b/arch/powerpc/include/asm/mman.h
diff --git a/include/asm-powerpc/mmu-40x.h b/arch/powerpc/include/asm/mmu-40x.h
index 3d108676584c..3d108676584c 100644
--- a/include/asm-powerpc/mmu-40x.h
+++ b/arch/powerpc/include/asm/mmu-40x.h
diff --git a/include/asm-powerpc/mmu-44x.h b/arch/powerpc/include/asm/mmu-44x.h
index a825524c981a..a825524c981a 100644
--- a/include/asm-powerpc/mmu-44x.h
+++ b/arch/powerpc/include/asm/mmu-44x.h
diff --git a/include/asm-powerpc/mmu-8xx.h b/arch/powerpc/include/asm/mmu-8xx.h
index 9db877eb88db..9db877eb88db 100644
--- a/include/asm-powerpc/mmu-8xx.h
+++ b/arch/powerpc/include/asm/mmu-8xx.h
diff --git a/include/asm-powerpc/mmu-fsl-booke.h b/arch/powerpc/include/asm/mmu-fsl-booke.h
index 925d93cf64d8..925d93cf64d8 100644
--- a/include/asm-powerpc/mmu-fsl-booke.h
+++ b/arch/powerpc/include/asm/mmu-fsl-booke.h
diff --git a/include/asm-powerpc/mmu-hash32.h b/arch/powerpc/include/asm/mmu-hash32.h
index 16b1a1e77e64..16b1a1e77e64 100644
--- a/include/asm-powerpc/mmu-hash32.h
+++ b/arch/powerpc/include/asm/mmu-hash32.h
diff --git a/include/asm-powerpc/mmu-hash64.h b/arch/powerpc/include/asm/mmu-hash64.h
index 19c7a9403490..c2df53c5ceb9 100644
--- a/include/asm-powerpc/mmu-hash64.h
+++ b/arch/powerpc/include/asm/mmu-hash64.h
@@ -278,7 +278,7 @@ extern int hash_huge_page(struct mm_struct *mm, unsigned long access,
 			  unsigned long trap);
 
 extern int htab_bolt_mapping(unsigned long vstart, unsigned long vend,
-			     unsigned long pstart, unsigned long mode,
+			     unsigned long pstart, unsigned long prot,
 			     int psize, int ssize);
 extern void set_huge_psize(int psize);
 extern void add_gpage(unsigned long addr, unsigned long page_size,
diff --git a/include/asm-powerpc/mmu.h b/arch/powerpc/include/asm/mmu.h
index 4c0e1b4f975c..4c0e1b4f975c 100644
--- a/include/asm-powerpc/mmu.h
+++ b/arch/powerpc/include/asm/mmu.h
diff --git a/arch/powerpc/include/asm/mmu_context.h b/arch/powerpc/include/asm/mmu_context.h
new file mode 100644
index 000000000000..6b993ef452ff
--- /dev/null
+++ b/arch/powerpc/include/asm/mmu_context.h
@@ -0,0 +1,279 @@
+#ifndef __ASM_POWERPC_MMU_CONTEXT_H
+#define __ASM_POWERPC_MMU_CONTEXT_H
+#ifdef __KERNEL__
+
+#include <asm/mmu.h>	
+#include <asm/cputable.h>
+#include <asm-generic/mm_hooks.h>
+
+#ifndef CONFIG_PPC64
+#include <asm/atomic.h>
+#include <linux/bitops.h>
+
+/*
+ * On 32-bit PowerPC 6xx/7xx/7xxx CPUs, we use a set of 16 VSIDs
+ * (virtual segment identifiers) for each context.  Although the
+ * hardware supports 24-bit VSIDs, and thus >1 million contexts,
+ * we only use 32,768 of them.  That is ample, since there can be
+ * at most around 30,000 tasks in the system anyway, and it means
+ * that we can use a bitmap to indicate which contexts are in use.
+ * Using a bitmap means that we entirely avoid all of the problems
+ * that we used to have when the context number overflowed,
+ * particularly on SMP systems.
+ *  -- paulus.
+ */
+
+/*
+ * This function defines the mapping from contexts to VSIDs (virtual
+ * segment IDs).  We use a skew on both the context and the high 4 bits
+ * of the 32-bit virtual address (the "effective segment ID") in order
+ * to spread out the entries in the MMU hash table.  Note, if this
+ * function is changed then arch/ppc/mm/hashtable.S will have to be
+ * changed to correspond.
+ */
+#define CTX_TO_VSID(ctx, va)	(((ctx) * (897 * 16) + ((va) >> 28) * 0x111) \
+				 & 0xffffff)
+
+/*
+   The MPC8xx has only 16 contexts.  We rotate through them on each
+   task switch.  A better way would be to keep track of tasks that
+   own contexts, and implement an LRU usage.  That way very active
+   tasks don't always have to pay the TLB reload overhead.  The
+   kernel pages are mapped shared, so the kernel can run on behalf
+   of any task that makes a kernel entry.  Shared does not mean they
+   are not protected, just that the ASID comparison is not performed.
+        -- Dan
+
+   The IBM4xx has 256 contexts, so we can just rotate through these
+   as a way of "switching" contexts.  If the TID of the TLB is zero,
+   the PID/TID comparison is disabled, so we can use a TID of zero
+   to represent all kernel pages as shared among all contexts.
+   	-- Dan
+ */
+
+static inline void enter_lazy_tlb(struct mm_struct *mm, struct task_struct *tsk)
+{
+}
+
+#ifdef CONFIG_8xx
+#define NO_CONTEXT      	16
+#define LAST_CONTEXT    	15
+#define FIRST_CONTEXT    	0
+
+#elif defined(CONFIG_4xx)
+#define NO_CONTEXT      	256
+#define LAST_CONTEXT    	255
+#define FIRST_CONTEXT    	1
+
+#elif defined(CONFIG_E200) || defined(CONFIG_E500)
+#define NO_CONTEXT      	256
+#define LAST_CONTEXT    	255
+#define FIRST_CONTEXT    	1
+
+#else
+
+/* PPC 6xx, 7xx CPUs */
+#define NO_CONTEXT      	((unsigned long) -1)
+#define LAST_CONTEXT    	32767
+#define FIRST_CONTEXT    	1
+#endif
+
+/*
+ * Set the current MMU context.
+ * On 32-bit PowerPCs (other than the 8xx embedded chips), this is done by
+ * loading up the segment registers for the user part of the address space.
+ *
+ * Since the PGD is immediately available, it is much faster to simply
+ * pass this along as a second parameter, which is required for 8xx and
+ * can be used for debugging on all processors (if you happen to have
+ * an Abatron).
+ */
+extern void set_context(unsigned long contextid, pgd_t *pgd);
+
+/*
+ * Bitmap of contexts in use.
+ * The size of this bitmap is LAST_CONTEXT + 1 bits.
+ */
+extern unsigned long context_map[];
+
+/*
+ * This caches the next context number that we expect to be free.
+ * Its use is an optimization only, we can't rely on this context
+ * number to be free, but it usually will be.
+ */
+extern unsigned long next_mmu_context;
+
+/*
+ * If we don't have sufficient contexts to give one to every task
+ * that could be in the system, we need to be able to steal contexts.
+ * These variables support that.
+ */
+#if LAST_CONTEXT < 30000
+#define FEW_CONTEXTS	1
+extern atomic_t nr_free_contexts;
+extern struct mm_struct *context_mm[LAST_CONTEXT+1];
+extern void steal_context(void);
+#endif
+
+/*
+ * Get a new mmu context for the address space described by `mm'.
+ */
+static inline void get_mmu_context(struct mm_struct *mm)
+{
+	unsigned long ctx;
+
+	if (mm->context.id != NO_CONTEXT)
+		return;
+#ifdef FEW_CONTEXTS
+	while (atomic_dec_if_positive(&nr_free_contexts) < 0)
+		steal_context();
+#endif
+	ctx = next_mmu_context;
+	while (test_and_set_bit(ctx, context_map)) {
+		ctx = find_next_zero_bit(context_map, LAST_CONTEXT+1, ctx);
+		if (ctx > LAST_CONTEXT)
+			ctx = 0;
+	}
+	next_mmu_context = (ctx + 1) & LAST_CONTEXT;
+	mm->context.id = ctx;
+#ifdef FEW_CONTEXTS
+	context_mm[ctx] = mm;
+#endif
+}
+
+/*
+ * Set up the context for a new address space.
+ */
+static inline int init_new_context(struct task_struct *t, struct mm_struct *mm)
+{
+	mm->context.id = NO_CONTEXT;
+	return 0;
+}
+
+/*
+ * We're finished using the context for an address space.
+ */
+static inline void destroy_context(struct mm_struct *mm)
+{
+	preempt_disable();
+	if (mm->context.id != NO_CONTEXT) {
+		clear_bit(mm->context.id, context_map);
+		mm->context.id = NO_CONTEXT;
+#ifdef FEW_CONTEXTS
+		atomic_inc(&nr_free_contexts);
+#endif
+	}
+	preempt_enable();
+}
+
+static inline void switch_mm(struct mm_struct *prev, struct mm_struct *next,
+			     struct task_struct *tsk)
+{
+#ifdef CONFIG_ALTIVEC
+	if (cpu_has_feature(CPU_FTR_ALTIVEC))
+	asm volatile ("dssall;\n"
+#ifndef CONFIG_POWER4
+	 "sync;\n" /* G4 needs a sync here, G5 apparently not */
+#endif
+	 : : );
+#endif /* CONFIG_ALTIVEC */
+
+	tsk->thread.pgdir = next->pgd;
+
+	/* No need to flush userspace segments if the mm doesnt change */
+	if (prev == next)
+		return;
+
+	/* Setup new userspace context */
+	get_mmu_context(next);
+	set_context(next->context.id, next->pgd);
+}
+
+#define deactivate_mm(tsk,mm)	do { } while (0)
+
+/*
+ * After we have set current->mm to a new value, this activates
+ * the context for the new mm so we see the new mappings.
+ */
+#define activate_mm(active_mm, mm)   switch_mm(active_mm, mm, current)
+
+extern void mmu_context_init(void);
+
+
+#else
+
+#include <linux/kernel.h>	
+#include <linux/mm.h>	
+#include <linux/sched.h>
+
+/*
+ * Copyright (C) 2001 PPC 64 Team, IBM Corp
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+static inline void enter_lazy_tlb(struct mm_struct *mm,
+				  struct task_struct *tsk)
+{
+}
+
+/*
+ * The proto-VSID space has 2^35 - 1 segments available for user mappings.
+ * Each segment contains 2^28 bytes.  Each context maps 2^44 bytes,
+ * so we can support 2^19-1 contexts (19 == 35 + 28 - 44).
+ */
+#define NO_CONTEXT	0
+#define MAX_CONTEXT	((1UL << 19) - 1)
+
+extern int init_new_context(struct task_struct *tsk, struct mm_struct *mm);
+extern void destroy_context(struct mm_struct *mm);
+
+extern void switch_stab(struct task_struct *tsk, struct mm_struct *mm);
+extern void switch_slb(struct task_struct *tsk, struct mm_struct *mm);
+
+/*
+ * switch_mm is the entry point called from the architecture independent
+ * code in kernel/sched.c
+ */
+static inline void switch_mm(struct mm_struct *prev, struct mm_struct *next,
+			     struct task_struct *tsk)
+{
+	if (!cpu_isset(smp_processor_id(), next->cpu_vm_mask))
+		cpu_set(smp_processor_id(), next->cpu_vm_mask);
+
+	/* No need to flush userspace segments if the mm doesnt change */
+	if (prev == next)
+		return;
+
+#ifdef CONFIG_ALTIVEC
+	if (cpu_has_feature(CPU_FTR_ALTIVEC))
+		asm volatile ("dssall");
+#endif /* CONFIG_ALTIVEC */
+
+	if (cpu_has_feature(CPU_FTR_SLB))
+		switch_slb(tsk, next);
+	else
+		switch_stab(tsk, next);
+}
+
+#define deactivate_mm(tsk,mm)	do { } while (0)
+
+/*
+ * After we have set current->mm to a new value, this activates
+ * the context for the new mm so we see the new mappings.
+ */
+static inline void activate_mm(struct mm_struct *prev, struct mm_struct *next)
+{
+	unsigned long flags;
+
+	local_irq_save(flags);
+	switch_mm(prev, next, current);
+	local_irq_restore(flags);
+}
+
+#endif /* CONFIG_PPC64 */
+#endif /* __KERNEL__ */
+#endif /* __ASM_POWERPC_MMU_CONTEXT_H */
diff --git a/include/asm-powerpc/mmzone.h b/arch/powerpc/include/asm/mmzone.h
index 19f299b7e256..19f299b7e256 100644
--- a/include/asm-powerpc/mmzone.h
+++ b/arch/powerpc/include/asm/mmzone.h
diff --git a/include/asm-powerpc/module.h b/arch/powerpc/include/asm/module.h
index e5f14b13ccf0..e5f14b13ccf0 100644
--- a/include/asm-powerpc/module.h
+++ b/arch/powerpc/include/asm/module.h
diff --git a/include/asm-powerpc/mpc512x.h b/arch/powerpc/include/asm/mpc512x.h
index c48a1658eeac..c48a1658eeac 100644
--- a/include/asm-powerpc/mpc512x.h
+++ b/arch/powerpc/include/asm/mpc512x.h
diff --git a/include/asm-powerpc/mpc52xx.h b/arch/powerpc/include/asm/mpc52xx.h
index 81ef10b6b672..81ef10b6b672 100644
--- a/include/asm-powerpc/mpc52xx.h
+++ b/arch/powerpc/include/asm/mpc52xx.h
diff --git a/include/asm-powerpc/mpc52xx_psc.h b/arch/powerpc/include/asm/mpc52xx_psc.h
index 710c5d36efaa..8917ed630565 100644
--- a/include/asm-powerpc/mpc52xx_psc.h
+++ b/arch/powerpc/include/asm/mpc52xx_psc.h
@@ -60,10 +60,12 @@
 #define MPC52xx_PSC_RXTX_FIFO_ALARM	0x0002
 #define MPC52xx_PSC_RXTX_FIFO_EMPTY	0x0001
 
-/* PSC interrupt mask bits */
+/* PSC interrupt status/mask bits */
 #define MPC52xx_PSC_IMR_TXRDY		0x0100
 #define MPC52xx_PSC_IMR_RXRDY		0x0200
 #define MPC52xx_PSC_IMR_DB		0x0400
+#define MPC52xx_PSC_IMR_TXEMP		0x0800
+#define MPC52xx_PSC_IMR_ORERR		0x1000
 #define MPC52xx_PSC_IMR_IPC		0x8000
 
 /* PSC input port change bit */
@@ -92,6 +94,34 @@
 
 #define MPC52xx_PSC_RFNUM_MASK	0x01ff
 
+#define MPC52xx_PSC_SICR_DTS1			(1 << 29)
+#define MPC52xx_PSC_SICR_SHDR			(1 << 28)
+#define MPC52xx_PSC_SICR_SIM_MASK		(0xf << 24)
+#define MPC52xx_PSC_SICR_SIM_UART		(0x0 << 24)
+#define MPC52xx_PSC_SICR_SIM_UART_DCD		(0x8 << 24)
+#define MPC52xx_PSC_SICR_SIM_CODEC_8		(0x1 << 24)
+#define MPC52xx_PSC_SICR_SIM_CODEC_16		(0x2 << 24)
+#define MPC52xx_PSC_SICR_SIM_AC97		(0x3 << 24)
+#define MPC52xx_PSC_SICR_SIM_SIR		(0x8 << 24)
+#define MPC52xx_PSC_SICR_SIM_SIR_DCD		(0xc << 24)
+#define MPC52xx_PSC_SICR_SIM_MIR		(0x5 << 24)
+#define MPC52xx_PSC_SICR_SIM_FIR		(0x6 << 24)
+#define MPC52xx_PSC_SICR_SIM_CODEC_24		(0x7 << 24)
+#define MPC52xx_PSC_SICR_SIM_CODEC_32		(0xf << 24)
+#define MPC52xx_PSC_SICR_GENCLK			(1 << 23)
+#define MPC52xx_PSC_SICR_I2S			(1 << 22)
+#define MPC52xx_PSC_SICR_CLKPOL			(1 << 21)
+#define MPC52xx_PSC_SICR_SYNCPOL		(1 << 20)
+#define MPC52xx_PSC_SICR_CELLSLAVE		(1 << 19)
+#define MPC52xx_PSC_SICR_CELL2XCLK		(1 << 18)
+#define MPC52xx_PSC_SICR_ESAI			(1 << 17)
+#define MPC52xx_PSC_SICR_ENAC97			(1 << 16)
+#define MPC52xx_PSC_SICR_SPI			(1 << 15)
+#define MPC52xx_PSC_SICR_MSTR			(1 << 14)
+#define MPC52xx_PSC_SICR_CPOL			(1 << 13)
+#define MPC52xx_PSC_SICR_CPHA			(1 << 12)
+#define MPC52xx_PSC_SICR_USEEOF			(1 << 11)
+#define MPC52xx_PSC_SICR_DISABLEEOF		(1 << 10)
 
 /* Structure of the hardware registers */
 struct mpc52xx_psc {
@@ -132,8 +162,12 @@ struct mpc52xx_psc {
 	u8		reserved5[3];
 	u8		ctlr;		/* PSC + 0x1c */
 	u8		reserved6[3];
-	u16		ccr;		/* PSC + 0x20 */
-	u8		reserved7[14];
+	/* BitClkDiv field of CCR is byte swapped in
+	 * the hardware for mpc5200/b compatibility */
+	u32		ccr;		/* PSC + 0x20 */
+	u32		ac97_slots;	/* PSC + 0x24 */
+	u32		ac97_cmd;	/* PSC + 0x28 */
+	u32		ac97_data;	/* PSC + 0x2c */
 	u8		ivr;		/* PSC + 0x30 */
 	u8		reserved8[3];
 	u8		ip;		/* PSC + 0x34 */
diff --git a/include/asm-powerpc/mpc6xx.h b/arch/powerpc/include/asm/mpc6xx.h
index effc2291beb2..effc2291beb2 100644
--- a/include/asm-powerpc/mpc6xx.h
+++ b/arch/powerpc/include/asm/mpc6xx.h
diff --git a/include/asm-powerpc/mpc8260.h b/arch/powerpc/include/asm/mpc8260.h
index 03317e1e6185..03317e1e6185 100644
--- a/include/asm-powerpc/mpc8260.h
+++ b/arch/powerpc/include/asm/mpc8260.h
diff --git a/include/asm-powerpc/mpc86xx.h b/arch/powerpc/include/asm/mpc86xx.h
index 15f650f987e7..15f650f987e7 100644
--- a/include/asm-powerpc/mpc86xx.h
+++ b/arch/powerpc/include/asm/mpc86xx.h
diff --git a/include/asm-powerpc/mpc8xx.h b/arch/powerpc/include/asm/mpc8xx.h
index 98f3c4f17328..98f3c4f17328 100644
--- a/include/asm-powerpc/mpc8xx.h
+++ b/arch/powerpc/include/asm/mpc8xx.h
diff --git a/include/asm-powerpc/mpic.h b/arch/powerpc/include/asm/mpic.h
index fe566a348a86..fe566a348a86 100644
--- a/include/asm-powerpc/mpic.h
+++ b/arch/powerpc/include/asm/mpic.h
diff --git a/include/asm-powerpc/msgbuf.h b/arch/powerpc/include/asm/msgbuf.h
index dd76743c7537..dd76743c7537 100644
--- a/include/asm-powerpc/msgbuf.h
+++ b/arch/powerpc/include/asm/msgbuf.h
diff --git a/include/asm-powerpc/mutex.h b/arch/powerpc/include/asm/mutex.h
index 458c1f7fbc18..458c1f7fbc18 100644
--- a/include/asm-powerpc/mutex.h
+++ b/arch/powerpc/include/asm/mutex.h
diff --git a/include/asm-powerpc/nvram.h b/arch/powerpc/include/asm/nvram.h
index efde5ac82f7b..efde5ac82f7b 100644
--- a/include/asm-powerpc/nvram.h
+++ b/arch/powerpc/include/asm/nvram.h
diff --git a/include/asm-powerpc/of_device.h b/arch/powerpc/include/asm/of_device.h
index 3c123990ca2e..3c123990ca2e 100644
--- a/include/asm-powerpc/of_device.h
+++ b/arch/powerpc/include/asm/of_device.h
diff --git a/include/asm-powerpc/of_platform.h b/arch/powerpc/include/asm/of_platform.h
index 18659ef72139..18659ef72139 100644
--- a/include/asm-powerpc/of_platform.h
+++ b/arch/powerpc/include/asm/of_platform.h
diff --git a/include/asm-powerpc/ohare.h b/arch/powerpc/include/asm/ohare.h
index 0d030f9dea24..0d030f9dea24 100644
--- a/include/asm-powerpc/ohare.h
+++ b/arch/powerpc/include/asm/ohare.h
diff --git a/include/asm-powerpc/oprofile_impl.h b/arch/powerpc/include/asm/oprofile_impl.h
index 95035c602ba6..95035c602ba6 100644
--- a/include/asm-powerpc/oprofile_impl.h
+++ b/arch/powerpc/include/asm/oprofile_impl.h
diff --git a/include/asm-powerpc/pSeries_reconfig.h b/arch/powerpc/include/asm/pSeries_reconfig.h
index e482e5352e69..e482e5352e69 100644
--- a/include/asm-powerpc/pSeries_reconfig.h
+++ b/arch/powerpc/include/asm/pSeries_reconfig.h
diff --git a/include/asm-powerpc/paca.h b/arch/powerpc/include/asm/paca.h
index 7b564444ff61..6493a395508b 100644
--- a/include/asm-powerpc/paca.h
+++ b/arch/powerpc/include/asm/paca.h
@@ -1,6 +1,4 @@
 /*
- * include/asm-powerpc/paca.h
- *
  * This control block defines the PACA which defines the processor
  * specific data for each logical processor on the system.
  * There are some pointers defined that are utilized by PLIC.
diff --git a/include/asm-powerpc/page.h b/arch/powerpc/include/asm/page.h
index e088545cb3f5..e088545cb3f5 100644
--- a/include/asm-powerpc/page.h
+++ b/arch/powerpc/include/asm/page.h
diff --git a/include/asm-powerpc/page_32.h b/arch/powerpc/include/asm/page_32.h
index ebfae530a379..ebfae530a379 100644
--- a/include/asm-powerpc/page_32.h
+++ b/arch/powerpc/include/asm/page_32.h
diff --git a/include/asm-powerpc/page_64.h b/arch/powerpc/include/asm/page_64.h
index 043bfdfe4f73..043bfdfe4f73 100644
--- a/include/asm-powerpc/page_64.h
+++ b/arch/powerpc/include/asm/page_64.h
diff --git a/include/asm-powerpc/param.h b/arch/powerpc/include/asm/param.h
index 094f63d4d5ca..094f63d4d5ca 100644
--- a/include/asm-powerpc/param.h
+++ b/arch/powerpc/include/asm/param.h
diff --git a/include/asm-powerpc/parport.h b/arch/powerpc/include/asm/parport.h
index 414c50e2e881..414c50e2e881 100644
--- a/include/asm-powerpc/parport.h
+++ b/arch/powerpc/include/asm/parport.h
diff --git a/include/asm-powerpc/pasemi_dma.h b/arch/powerpc/include/asm/pasemi_dma.h
index 19fd7933e2d9..19fd7933e2d9 100644
--- a/include/asm-powerpc/pasemi_dma.h
+++ b/arch/powerpc/include/asm/pasemi_dma.h
diff --git a/include/asm-powerpc/pci-bridge.h b/arch/powerpc/include/asm/pci-bridge.h
index ae2ea803a0f2..ae2ea803a0f2 100644
--- a/include/asm-powerpc/pci-bridge.h
+++ b/arch/powerpc/include/asm/pci-bridge.h
diff --git a/include/asm-powerpc/pci.h b/arch/powerpc/include/asm/pci.h
index a05a942b1c25..a05a942b1c25 100644
--- a/include/asm-powerpc/pci.h
+++ b/arch/powerpc/include/asm/pci.h
diff --git a/include/asm-powerpc/percpu.h b/arch/powerpc/include/asm/percpu.h
index f879252b7ea6..f879252b7ea6 100644
--- a/include/asm-powerpc/percpu.h
+++ b/arch/powerpc/include/asm/percpu.h
diff --git a/include/asm-powerpc/pgalloc-32.h b/arch/powerpc/include/asm/pgalloc-32.h
index 58c07147b3ea..58c07147b3ea 100644
--- a/include/asm-powerpc/pgalloc-32.h
+++ b/arch/powerpc/include/asm/pgalloc-32.h
diff --git a/include/asm-powerpc/pgalloc-64.h b/arch/powerpc/include/asm/pgalloc-64.h
index 812a1d8f35cb..812a1d8f35cb 100644
--- a/include/asm-powerpc/pgalloc-64.h
+++ b/arch/powerpc/include/asm/pgalloc-64.h
diff --git a/include/asm-powerpc/pgalloc.h b/arch/powerpc/include/asm/pgalloc.h
index b4505ed0f0f2..b4505ed0f0f2 100644
--- a/include/asm-powerpc/pgalloc.h
+++ b/arch/powerpc/include/asm/pgalloc.h
diff --git a/include/asm-powerpc/pgtable-4k.h b/arch/powerpc/include/asm/pgtable-4k.h
index c9601dfb4a1e..6b18ba9d2d85 100644
--- a/include/asm-powerpc/pgtable-4k.h
+++ b/arch/powerpc/include/asm/pgtable-4k.h
@@ -46,6 +46,8 @@
 #define _PAGE_GROUP_IX  0x7000 /* software: HPTE index within group */
 #define _PAGE_F_SECOND  _PAGE_SECONDARY
 #define _PAGE_F_GIX     _PAGE_GROUP_IX
+#define _PAGE_SPECIAL	0x10000 /* software: special page */
+#define __HAVE_ARCH_PTE_SPECIAL
 
 /* PTE flags to conserve for HPTE identification */
 #define _PAGE_HPTEFLAGS (_PAGE_BUSY | _PAGE_HASHPTE | \
diff --git a/include/asm-powerpc/pgtable-64k.h b/arch/powerpc/include/asm/pgtable-64k.h
index 7e54adb35596..07b0d8f09cb6 100644
--- a/include/asm-powerpc/pgtable-64k.h
+++ b/arch/powerpc/include/asm/pgtable-64k.h
@@ -70,6 +70,8 @@ static inline struct subpage_prot_table *pgd_subpage_prot(pgd_t *pgd)
 #define PGDIR_MASK	(~(PGDIR_SIZE-1))
 
 /* Additional PTE bits (don't change without checking asm in hash_low.S) */
+#define __HAVE_ARCH_PTE_SPECIAL
+#define _PAGE_SPECIAL	0x00000400 /* software: special page */
 #define _PAGE_HPTE_SUB	0x0ffff000 /* combo only: sub pages HPTE bits */
 #define _PAGE_HPTE_SUB0	0x08000000 /* combo only: first sub page */
 #define _PAGE_COMBO	0x10000000 /* this is a combo 4k page */
diff --git a/include/asm-powerpc/pgtable-ppc32.h b/arch/powerpc/include/asm/pgtable-ppc32.h
index bdbab72f3ebc..6fe39e327047 100644
--- a/include/asm-powerpc/pgtable-ppc32.h
+++ b/arch/powerpc/include/asm/pgtable-ppc32.h
@@ -401,6 +401,9 @@ extern int icache_44x_need_flush;
 #ifndef _PAGE_COHERENT
 #define _PAGE_COHERENT	0
 #endif
+#ifndef _PAGE_WRITETHRU
+#define _PAGE_WRITETHRU	0
+#endif
 #ifndef _PMD_PRESENT_MASK
 #define _PMD_PRESENT_MASK	_PMD_PRESENT
 #endif
diff --git a/include/asm-powerpc/pgtable-ppc64.h b/arch/powerpc/include/asm/pgtable-ppc64.h
index ba8000352b9a..4597c491e9b5 100644
--- a/include/asm-powerpc/pgtable-ppc64.h
+++ b/arch/powerpc/include/asm/pgtable-ppc64.h
@@ -100,7 +100,7 @@
 
 #define _PAGE_WRENABLE	(_PAGE_RW | _PAGE_DIRTY)
 
-/* __pgprot defined in asm-powerpc/page.h */
+/* __pgprot defined in arch/powerpc/incliude/asm/page.h */
 #define PAGE_NONE	__pgprot(_PAGE_PRESENT | _PAGE_ACCESSED)
 
 #define PAGE_SHARED	__pgprot(_PAGE_BASE | _PAGE_RW | _PAGE_USER)
@@ -153,12 +153,10 @@
 #define __S110	PAGE_SHARED_X
 #define __S111	PAGE_SHARED_X
 
-#ifdef CONFIG_HUGETLB_PAGE
-
+#ifdef CONFIG_PPC_MM_SLICES
 #define HAVE_ARCH_UNMAPPED_AREA
 #define HAVE_ARCH_UNMAPPED_AREA_TOPDOWN
-
-#endif
+#endif /* CONFIG_PPC_MM_SLICES */
 
 #ifndef __ASSEMBLY__
 
@@ -245,7 +243,7 @@ static inline int pte_write(pte_t pte) { return pte_val(pte) & _PAGE_RW;}
 static inline int pte_dirty(pte_t pte) { return pte_val(pte) & _PAGE_DIRTY;}
 static inline int pte_young(pte_t pte) { return pte_val(pte) & _PAGE_ACCESSED;}
 static inline int pte_file(pte_t pte) { return pte_val(pte) & _PAGE_FILE;}
-static inline int pte_special(pte_t pte) { return 0; }
+static inline int pte_special(pte_t pte) { return pte_val(pte) & _PAGE_SPECIAL; }
 
 static inline void pte_uncache(pte_t pte) { pte_val(pte) |= _PAGE_NO_CACHE; }
 static inline void pte_cache(pte_t pte)   { pte_val(pte) &= ~_PAGE_NO_CACHE; }
@@ -265,7 +263,7 @@ static inline pte_t pte_mkyoung(pte_t pte) {
 static inline pte_t pte_mkhuge(pte_t pte) {
 	return pte; }
 static inline pte_t pte_mkspecial(pte_t pte) {
-	return pte; }
+	pte_val(pte) |= _PAGE_SPECIAL; return pte; }
 static inline unsigned long pte_pgprot(pte_t pte)
 {
 	return __pgprot(pte_val(pte)) & PAGE_PROT_BITS;
@@ -461,6 +459,8 @@ void pgtable_cache_init(void);
 	return pt;
 }
 
+pte_t *huge_pte_offset(struct mm_struct *mm, unsigned long address);
+
 #endif /* __ASSEMBLY__ */
 
 #endif /* _ASM_POWERPC_PGTABLE_PPC64_H_ */
diff --git a/arch/powerpc/include/asm/pgtable.h b/arch/powerpc/include/asm/pgtable.h
new file mode 100644
index 000000000000..dbb8ca172e44
--- /dev/null
+++ b/arch/powerpc/include/asm/pgtable.h
@@ -0,0 +1,57 @@
+#ifndef _ASM_POWERPC_PGTABLE_H
+#define _ASM_POWERPC_PGTABLE_H
+#ifdef __KERNEL__
+
+#ifndef __ASSEMBLY__
+#include <asm/processor.h>		/* For TASK_SIZE */
+#include <asm/mmu.h>
+#include <asm/page.h>
+struct mm_struct;
+#endif /* !__ASSEMBLY__ */
+
+#if defined(CONFIG_PPC64)
+#  include <asm/pgtable-ppc64.h>
+#else
+#  include <asm/pgtable-ppc32.h>
+#endif
+
+#ifndef __ASSEMBLY__
+/*
+ * ZERO_PAGE is a global shared page that is always zero: used
+ * for zero-mapped memory areas etc..
+ */
+extern unsigned long empty_zero_page[];
+#define ZERO_PAGE(vaddr) (virt_to_page(empty_zero_page))
+
+extern pgd_t swapper_pg_dir[];
+
+extern void paging_init(void);
+
+/*
+ * kern_addr_valid is intended to indicate whether an address is a valid
+ * kernel address.  Most 32-bit archs define it as always true (like this)
+ * but most 64-bit archs actually perform a test.  What should we do here?
+ */
+#define kern_addr_valid(addr)	(1)
+
+#define io_remap_pfn_range(vma, vaddr, pfn, size, prot)		\
+		remap_pfn_range(vma, vaddr, pfn, size, prot)
+
+#include <asm-generic/pgtable.h>
+
+
+/*
+ * This gets called at the end of handling a page fault, when
+ * the kernel has put a new PTE into the page table for the process.
+ * We use it to ensure coherency between the i-cache and d-cache
+ * for the page which has just been mapped in.
+ * On machines which use an MMU hash table, we use this to put a
+ * corresponding HPTE into the hash table ahead of time, instead of
+ * waiting for the inevitable extra hash-table miss exception.
+ */
+extern void update_mmu_cache(struct vm_area_struct *, unsigned long, pte_t);
+
+#endif /* __ASSEMBLY__ */
+
+#endif /* __KERNEL__ */
+#endif /* _ASM_POWERPC_PGTABLE_H */
diff --git a/include/asm-powerpc/phyp_dump.h b/arch/powerpc/include/asm/phyp_dump.h
index fa74c6c3e106..fa74c6c3e106 100644
--- a/include/asm-powerpc/phyp_dump.h
+++ b/arch/powerpc/include/asm/phyp_dump.h
diff --git a/include/asm-powerpc/pmac_feature.h b/arch/powerpc/include/asm/pmac_feature.h
index 877c35a4356e..877c35a4356e 100644
--- a/include/asm-powerpc/pmac_feature.h
+++ b/arch/powerpc/include/asm/pmac_feature.h
diff --git a/include/asm-powerpc/pmac_low_i2c.h b/arch/powerpc/include/asm/pmac_low_i2c.h
index 131011bd7e76..131011bd7e76 100644
--- a/include/asm-powerpc/pmac_low_i2c.h
+++ b/arch/powerpc/include/asm/pmac_low_i2c.h
diff --git a/include/asm-powerpc/pmac_pfunc.h b/arch/powerpc/include/asm/pmac_pfunc.h
index 1330d6a58c57..1330d6a58c57 100644
--- a/include/asm-powerpc/pmac_pfunc.h
+++ b/arch/powerpc/include/asm/pmac_pfunc.h
diff --git a/include/asm-powerpc/pmc.h b/arch/powerpc/include/asm/pmc.h
index d6a616a1b3ea..d6a616a1b3ea 100644
--- a/include/asm-powerpc/pmc.h
+++ b/arch/powerpc/include/asm/pmc.h
diff --git a/include/asm-powerpc/pmi.h b/arch/powerpc/include/asm/pmi.h
index b4e91fbf5081..b4e91fbf5081 100644
--- a/include/asm-powerpc/pmi.h
+++ b/arch/powerpc/include/asm/pmi.h
diff --git a/include/asm-powerpc/poll.h b/arch/powerpc/include/asm/poll.h
index c98509d3149e..c98509d3149e 100644
--- a/include/asm-powerpc/poll.h
+++ b/arch/powerpc/include/asm/poll.h
diff --git a/include/asm-powerpc/posix_types.h b/arch/powerpc/include/asm/posix_types.h
index c4e396b540df..c4e396b540df 100644
--- a/include/asm-powerpc/posix_types.h
+++ b/arch/powerpc/include/asm/posix_types.h
diff --git a/include/asm-powerpc/ppc-pci.h b/arch/powerpc/include/asm/ppc-pci.h
index 854ab713f56c..854ab713f56c 100644
--- a/include/asm-powerpc/ppc-pci.h
+++ b/arch/powerpc/include/asm/ppc-pci.h
diff --git a/include/asm-powerpc/ppc4xx.h b/arch/powerpc/include/asm/ppc4xx.h
index 033039a80c42..033039a80c42 100644
--- a/include/asm-powerpc/ppc4xx.h
+++ b/arch/powerpc/include/asm/ppc4xx.h
diff --git a/include/asm-powerpc/ppc_asm.h b/arch/powerpc/include/asm/ppc_asm.h
index 0966899d974b..0966899d974b 100644
--- a/include/asm-powerpc/ppc_asm.h
+++ b/arch/powerpc/include/asm/ppc_asm.h
diff --git a/include/asm-powerpc/processor.h b/arch/powerpc/include/asm/processor.h
index 101ed87f7d84..101ed87f7d84 100644
--- a/include/asm-powerpc/processor.h
+++ b/arch/powerpc/include/asm/processor.h
diff --git a/include/asm-powerpc/prom.h b/arch/powerpc/include/asm/prom.h
index eb3bd2e1c7f6..eb3bd2e1c7f6 100644
--- a/include/asm-powerpc/prom.h
+++ b/arch/powerpc/include/asm/prom.h
diff --git a/include/asm-powerpc/ps3.h b/arch/powerpc/include/asm/ps3.h
index f9e34c493cbb..f9e34c493cbb 100644
--- a/include/asm-powerpc/ps3.h
+++ b/arch/powerpc/include/asm/ps3.h
diff --git a/include/asm-powerpc/ps3av.h b/arch/powerpc/include/asm/ps3av.h
index fda98715cd35..fda98715cd35 100644
--- a/include/asm-powerpc/ps3av.h
+++ b/arch/powerpc/include/asm/ps3av.h
diff --git a/include/asm-powerpc/ps3fb.h b/arch/powerpc/include/asm/ps3fb.h
index 3f121fe4010d..3f121fe4010d 100644
--- a/include/asm-powerpc/ps3fb.h
+++ b/arch/powerpc/include/asm/ps3fb.h
diff --git a/include/asm-powerpc/ps3stor.h b/arch/powerpc/include/asm/ps3stor.h
index 6fcaf714fa50..6fcaf714fa50 100644
--- a/include/asm-powerpc/ps3stor.h
+++ b/arch/powerpc/include/asm/ps3stor.h
diff --git a/arch/powerpc/include/asm/ptrace.h b/arch/powerpc/include/asm/ptrace.h
new file mode 100644
index 000000000000..734e0754fb9b
--- /dev/null
+++ b/arch/powerpc/include/asm/ptrace.h
@@ -0,0 +1,293 @@
+#ifndef _ASM_POWERPC_PTRACE_H
+#define _ASM_POWERPC_PTRACE_H
+
+/*
+ * Copyright (C) 2001 PPC64 Team, IBM Corp
+ *
+ * This struct defines the way the registers are stored on the
+ * kernel stack during a system call or other kernel entry.
+ *
+ * this should only contain volatile regs
+ * since we can keep non-volatile in the thread_struct
+ * should set this up when only volatiles are saved
+ * by intr code.
+ *
+ * Since this is going on the stack, *CARE MUST BE TAKEN* to insure
+ * that the overall structure is a multiple of 16 bytes in length.
+ *
+ * Note that the offsets of the fields in this struct correspond with
+ * the PT_* values below.  This simplifies arch/powerpc/kernel/ptrace.c.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#ifndef __ASSEMBLY__
+
+struct pt_regs {
+	unsigned long gpr[32];
+	unsigned long nip;
+	unsigned long msr;
+	unsigned long orig_gpr3;	/* Used for restarting system calls */
+	unsigned long ctr;
+	unsigned long link;
+	unsigned long xer;
+	unsigned long ccr;
+#ifdef __powerpc64__
+	unsigned long softe;		/* Soft enabled/disabled */
+#else
+	unsigned long mq;		/* 601 only (not used at present) */
+					/* Used on APUS to hold IPL value. */
+#endif
+	unsigned long trap;		/* Reason for being here */
+	/* N.B. for critical exceptions on 4xx, the dar and dsisr
+	   fields are overloaded to hold srr0 and srr1. */
+	unsigned long dar;		/* Fault registers */
+	unsigned long dsisr;		/* on 4xx/Book-E used for ESR */
+	unsigned long result;		/* Result of a system call */
+};
+
+#endif /* __ASSEMBLY__ */
+
+#ifdef __KERNEL__
+
+#ifdef __powerpc64__
+
+#define __ARCH_WANT_COMPAT_SYS_PTRACE
+
+#define STACK_FRAME_OVERHEAD	112	/* size of minimum stack frame */
+#define STACK_FRAME_LR_SAVE	2	/* Location of LR in stack frame */
+#define STACK_FRAME_REGS_MARKER	ASM_CONST(0x7265677368657265)
+#define STACK_INT_FRAME_SIZE	(sizeof(struct pt_regs) + \
+					STACK_FRAME_OVERHEAD + 288)
+#define STACK_FRAME_MARKER	12
+
+/* Size of dummy stack frame allocated when calling signal handler. */
+#define __SIGNAL_FRAMESIZE	128
+#define __SIGNAL_FRAMESIZE32	64
+
+#else /* __powerpc64__ */
+
+#define STACK_FRAME_OVERHEAD	16	/* size of minimum stack frame */
+#define STACK_FRAME_LR_SAVE	1	/* Location of LR in stack frame */
+#define STACK_FRAME_REGS_MARKER	ASM_CONST(0x72656773)
+#define STACK_INT_FRAME_SIZE	(sizeof(struct pt_regs) + STACK_FRAME_OVERHEAD)
+#define STACK_FRAME_MARKER	2
+
+/* Size of stack frame allocated when calling signal handler. */
+#define __SIGNAL_FRAMESIZE	64
+
+#endif /* __powerpc64__ */
+
+#ifndef __ASSEMBLY__
+
+#define instruction_pointer(regs) ((regs)->nip)
+#define user_stack_pointer(regs) ((regs)->gpr[1])
+#define regs_return_value(regs) ((regs)->gpr[3])
+
+#ifdef CONFIG_SMP
+extern unsigned long profile_pc(struct pt_regs *regs);
+#else
+#define profile_pc(regs) instruction_pointer(regs)
+#endif
+
+#ifdef __powerpc64__
+#define user_mode(regs) ((((regs)->msr) >> MSR_PR_LG) & 0x1)
+#else
+#define user_mode(regs) (((regs)->msr & MSR_PR) != 0)
+#endif
+
+#define force_successful_syscall_return()   \
+	do { \
+		set_thread_flag(TIF_NOERROR); \
+	} while(0)
+
+struct task_struct;
+extern unsigned long ptrace_get_reg(struct task_struct *task, int regno);
+extern int ptrace_put_reg(struct task_struct *task, int regno,
+			  unsigned long data);
+
+/*
+ * We use the least-significant bit of the trap field to indicate
+ * whether we have saved the full set of registers, or only a
+ * partial set.  A 1 there means the partial set.
+ * On 4xx we use the next bit to indicate whether the exception
+ * is a critical exception (1 means it is).
+ */
+#define FULL_REGS(regs)		(((regs)->trap & 1) == 0)
+#ifndef __powerpc64__
+#define IS_CRITICAL_EXC(regs)	(((regs)->trap & 2) != 0)
+#define IS_MCHECK_EXC(regs)	(((regs)->trap & 4) != 0)
+#define IS_DEBUG_EXC(regs)	(((regs)->trap & 8) != 0)
+#endif /* ! __powerpc64__ */
+#define TRAP(regs)		((regs)->trap & ~0xF)
+#ifdef __powerpc64__
+#define CHECK_FULL_REGS(regs)	BUG_ON(regs->trap & 1)
+#else
+#define CHECK_FULL_REGS(regs)						      \
+do {									      \
+	if ((regs)->trap & 1)						      \
+		printk(KERN_CRIT "%s: partial register set\n", __FUNCTION__); \
+} while (0)
+#endif /* __powerpc64__ */
+
+/*
+ * These are defined as per linux/ptrace.h, which see.
+ */
+#define arch_has_single_step()	(1)
+extern void user_enable_single_step(struct task_struct *);
+extern void user_disable_single_step(struct task_struct *);
+
+#endif /* __ASSEMBLY__ */
+
+#endif /* __KERNEL__ */
+
+/*
+ * Offsets used by 'ptrace' system call interface.
+ * These can't be changed without breaking binary compatibility
+ * with MkLinux, etc.
+ */
+#define PT_R0	0
+#define PT_R1	1
+#define PT_R2	2
+#define PT_R3	3
+#define PT_R4	4
+#define PT_R5	5
+#define PT_R6	6
+#define PT_R7	7
+#define PT_R8	8
+#define PT_R9	9
+#define PT_R10	10
+#define PT_R11	11
+#define PT_R12	12
+#define PT_R13	13
+#define PT_R14	14
+#define PT_R15	15
+#define PT_R16	16
+#define PT_R17	17
+#define PT_R18	18
+#define PT_R19	19
+#define PT_R20	20
+#define PT_R21	21
+#define PT_R22	22
+#define PT_R23	23
+#define PT_R24	24
+#define PT_R25	25
+#define PT_R26	26
+#define PT_R27	27
+#define PT_R28	28
+#define PT_R29	29
+#define PT_R30	30
+#define PT_R31	31
+
+#define PT_NIP	32
+#define PT_MSR	33
+#define PT_ORIG_R3 34
+#define PT_CTR	35
+#define PT_LNK	36
+#define PT_XER	37
+#define PT_CCR	38
+#ifndef __powerpc64__
+#define PT_MQ	39
+#else
+#define PT_SOFTE 39
+#endif
+#define PT_TRAP	40
+#define PT_DAR	41
+#define PT_DSISR 42
+#define PT_RESULT 43
+#define PT_REGS_COUNT 44
+
+#define PT_FPR0	48	/* each FP reg occupies 2 slots in this space */
+
+#ifndef __powerpc64__
+
+#define PT_FPR31 (PT_FPR0 + 2*31)
+#define PT_FPSCR (PT_FPR0 + 2*32 + 1)
+
+#else /* __powerpc64__ */
+
+#define PT_FPSCR (PT_FPR0 + 32)	/* each FP reg occupies 1 slot in 64-bit space */
+
+#ifdef __KERNEL__
+#define PT_FPSCR32 (PT_FPR0 + 2*32 + 1)	/* each FP reg occupies 2 32-bit userspace slots */
+#endif
+
+#define PT_VR0 82	/* each Vector reg occupies 2 slots in 64-bit */
+#define PT_VSCR (PT_VR0 + 32*2 + 1)
+#define PT_VRSAVE (PT_VR0 + 33*2)
+
+#ifdef __KERNEL__
+#define PT_VR0_32 164	/* each Vector reg occupies 4 slots in 32-bit */
+#define PT_VSCR_32 (PT_VR0 + 32*4 + 3)
+#define PT_VRSAVE_32 (PT_VR0 + 33*4)
+#endif
+
+/*
+ * Only store first 32 VSRs here. The second 32 VSRs in VR0-31
+ */
+#define PT_VSR0 150	/* each VSR reg occupies 2 slots in 64-bit */
+#define PT_VSR31 (PT_VSR0 + 2*31)
+#ifdef __KERNEL__
+#define PT_VSR0_32 300 	/* each VSR reg occupies 4 slots in 32-bit */
+#endif
+#endif /* __powerpc64__ */
+
+/*
+ * Get/set all the altivec registers vr0..vr31, vscr, vrsave, in one go.
+ * The transfer totals 34 quadword.  Quadwords 0-31 contain the
+ * corresponding vector registers.  Quadword 32 contains the vscr as the
+ * last word (offset 12) within that quadword.  Quadword 33 contains the
+ * vrsave as the first word (offset 0) within the quadword.
+ *
+ * This definition of the VMX state is compatible with the current PPC32
+ * ptrace interface.  This allows signal handling and ptrace to use the same
+ * structures.  This also simplifies the implementation of a bi-arch
+ * (combined (32- and 64-bit) gdb.
+ */
+#define PTRACE_GETVRREGS	18
+#define PTRACE_SETVRREGS	19
+
+/* Get/set all the upper 32-bits of the SPE registers, accumulator, and
+ * spefscr, in one go */
+#define PTRACE_GETEVRREGS	20
+#define PTRACE_SETEVRREGS	21
+
+/* Get the first 32 128bit VSX registers */
+#define PTRACE_GETVSRREGS	27
+#define PTRACE_SETVSRREGS	28
+
+/*
+ * Get or set a debug register. The first 16 are DABR registers and the
+ * second 16 are IABR registers.
+ */
+#define PTRACE_GET_DEBUGREG	25
+#define PTRACE_SET_DEBUGREG	26
+
+/* (new) PTRACE requests using the same numbers as x86 and the same
+ * argument ordering. Additionally, they support more registers too
+ */
+#define PTRACE_GETREGS            12
+#define PTRACE_SETREGS            13
+#define PTRACE_GETFPREGS          14
+#define PTRACE_SETFPREGS          15
+#define PTRACE_GETREGS64	  22
+#define PTRACE_SETREGS64	  23
+
+/* (old) PTRACE requests with inverted arguments */
+#define PPC_PTRACE_GETREGS	0x99	/* Get GPRs 0 - 31 */
+#define PPC_PTRACE_SETREGS	0x98	/* Set GPRs 0 - 31 */
+#define PPC_PTRACE_GETFPREGS	0x97	/* Get FPRs 0 - 31 */
+#define PPC_PTRACE_SETFPREGS	0x96	/* Set FPRs 0 - 31 */
+
+/* Calls to trace a 64bit program from a 32bit program */
+#define PPC_PTRACE_PEEKTEXT_3264 0x95
+#define PPC_PTRACE_PEEKDATA_3264 0x94
+#define PPC_PTRACE_POKETEXT_3264 0x93
+#define PPC_PTRACE_POKEDATA_3264 0x92
+#define PPC_PTRACE_PEEKUSR_3264  0x91
+#define PPC_PTRACE_POKEUSR_3264  0x90
+
+#endif /* _ASM_POWERPC_PTRACE_H */
diff --git a/include/asm-powerpc/qe.h b/arch/powerpc/include/asm/qe.h
index edee15d269ea..edee15d269ea 100644
--- a/include/asm-powerpc/qe.h
+++ b/arch/powerpc/include/asm/qe.h
diff --git a/include/asm-powerpc/qe_ic.h b/arch/powerpc/include/asm/qe_ic.h
index a779b2c9eaf1..56a7745ca343 100644
--- a/include/asm-powerpc/qe_ic.h
+++ b/arch/powerpc/include/asm/qe_ic.h
@@ -1,6 +1,4 @@
 /*
- * include/asm-powerpc/qe_ic.h
- *
  * Copyright (C) 2006 Freescale Semicondutor, Inc. All rights reserved.
  *
  * Authors: 	Shlomi Gridish <gridish@freescale.com>
diff --git a/include/asm-powerpc/reg.h b/arch/powerpc/include/asm/reg.h
index c6d1ab650778..c6d1ab650778 100644
--- a/include/asm-powerpc/reg.h
+++ b/arch/powerpc/include/asm/reg.h
diff --git a/include/asm-powerpc/reg_8xx.h b/arch/powerpc/include/asm/reg_8xx.h
index e8ea346b21d3..e8ea346b21d3 100644
--- a/include/asm-powerpc/reg_8xx.h
+++ b/arch/powerpc/include/asm/reg_8xx.h
diff --git a/include/asm-powerpc/reg_booke.h b/arch/powerpc/include/asm/reg_booke.h
index be980f4ee495..be980f4ee495 100644
--- a/include/asm-powerpc/reg_booke.h
+++ b/arch/powerpc/include/asm/reg_booke.h
diff --git a/include/asm-powerpc/reg_fsl_emb.h b/arch/powerpc/include/asm/reg_fsl_emb.h
index 1e180a594589..1e180a594589 100644
--- a/include/asm-powerpc/reg_fsl_emb.h
+++ b/arch/powerpc/include/asm/reg_fsl_emb.h
diff --git a/include/asm-powerpc/resource.h b/arch/powerpc/include/asm/resource.h
index 04bc4db8921b..04bc4db8921b 100644
--- a/include/asm-powerpc/resource.h
+++ b/arch/powerpc/include/asm/resource.h
diff --git a/include/asm-powerpc/rheap.h b/arch/powerpc/include/asm/rheap.h
index 172381769cfc..172381769cfc 100644
--- a/include/asm-powerpc/rheap.h
+++ b/arch/powerpc/include/asm/rheap.h
diff --git a/include/asm-powerpc/rio.h b/arch/powerpc/include/asm/rio.h
index 0018bf80cb25..0018bf80cb25 100644
--- a/include/asm-powerpc/rio.h
+++ b/arch/powerpc/include/asm/rio.h
diff --git a/include/asm-powerpc/rtas.h b/arch/powerpc/include/asm/rtas.h
index 8eaa7b28d9d0..8eaa7b28d9d0 100644
--- a/include/asm-powerpc/rtas.h
+++ b/arch/powerpc/include/asm/rtas.h
diff --git a/include/asm-powerpc/rtc.h b/arch/powerpc/include/asm/rtc.h
index f5802926b6c0..f5802926b6c0 100644
--- a/include/asm-powerpc/rtc.h
+++ b/arch/powerpc/include/asm/rtc.h
diff --git a/arch/powerpc/include/asm/rwsem.h b/arch/powerpc/include/asm/rwsem.h
new file mode 100644
index 000000000000..24cd9281ec37
--- /dev/null
+++ b/arch/powerpc/include/asm/rwsem.h
@@ -0,0 +1,173 @@
+#ifndef _ASM_POWERPC_RWSEM_H
+#define _ASM_POWERPC_RWSEM_H
+
+#ifndef _LINUX_RWSEM_H
+#error "Please don't include <asm/rwsem.h> directly, use <linux/rwsem.h> instead."
+#endif
+
+#ifdef __KERNEL__
+
+/*
+ * R/W semaphores for PPC using the stuff in lib/rwsem.c.
+ * Adapted largely from include/asm-i386/rwsem.h
+ * by Paul Mackerras <paulus@samba.org>.
+ */
+
+#include <linux/list.h>
+#include <linux/spinlock.h>
+#include <asm/atomic.h>
+#include <asm/system.h>
+
+/*
+ * the semaphore definition
+ */
+struct rw_semaphore {
+	/* XXX this should be able to be an atomic_t  -- paulus */
+	signed int		count;
+#define RWSEM_UNLOCKED_VALUE		0x00000000
+#define RWSEM_ACTIVE_BIAS		0x00000001
+#define RWSEM_ACTIVE_MASK		0x0000ffff
+#define RWSEM_WAITING_BIAS		(-0x00010000)
+#define RWSEM_ACTIVE_READ_BIAS		RWSEM_ACTIVE_BIAS
+#define RWSEM_ACTIVE_WRITE_BIAS		(RWSEM_WAITING_BIAS + RWSEM_ACTIVE_BIAS)
+	spinlock_t		wait_lock;
+	struct list_head	wait_list;
+#ifdef CONFIG_DEBUG_LOCK_ALLOC
+	struct lockdep_map	dep_map;
+#endif
+};
+
+#ifdef CONFIG_DEBUG_LOCK_ALLOC
+# define __RWSEM_DEP_MAP_INIT(lockname) , .dep_map = { .name = #lockname }
+#else
+# define __RWSEM_DEP_MAP_INIT(lockname)
+#endif
+
+#define __RWSEM_INITIALIZER(name) \
+	{ RWSEM_UNLOCKED_VALUE, __SPIN_LOCK_UNLOCKED((name).wait_lock), \
+	  LIST_HEAD_INIT((name).wait_list) __RWSEM_DEP_MAP_INIT(name) }
+
+#define DECLARE_RWSEM(name)		\
+	struct rw_semaphore name = __RWSEM_INITIALIZER(name)
+
+extern struct rw_semaphore *rwsem_down_read_failed(struct rw_semaphore *sem);
+extern struct rw_semaphore *rwsem_down_write_failed(struct rw_semaphore *sem);
+extern struct rw_semaphore *rwsem_wake(struct rw_semaphore *sem);
+extern struct rw_semaphore *rwsem_downgrade_wake(struct rw_semaphore *sem);
+
+extern void __init_rwsem(struct rw_semaphore *sem, const char *name,
+			 struct lock_class_key *key);
+
+#define init_rwsem(sem)					\
+	do {						\
+		static struct lock_class_key __key;	\
+							\
+		__init_rwsem((sem), #sem, &__key);	\
+	} while (0)
+
+/*
+ * lock for reading
+ */
+static inline void __down_read(struct rw_semaphore *sem)
+{
+	if (unlikely(atomic_inc_return((atomic_t *)(&sem->count)) <= 0))
+		rwsem_down_read_failed(sem);
+}
+
+static inline int __down_read_trylock(struct rw_semaphore *sem)
+{
+	int tmp;
+
+	while ((tmp = sem->count) >= 0) {
+		if (tmp == cmpxchg(&sem->count, tmp,
+				   tmp + RWSEM_ACTIVE_READ_BIAS)) {
+			return 1;
+		}
+	}
+	return 0;
+}
+
+/*
+ * lock for writing
+ */
+static inline void __down_write_nested(struct rw_semaphore *sem, int subclass)
+{
+	int tmp;
+
+	tmp = atomic_add_return(RWSEM_ACTIVE_WRITE_BIAS,
+				(atomic_t *)(&sem->count));
+	if (unlikely(tmp != RWSEM_ACTIVE_WRITE_BIAS))
+		rwsem_down_write_failed(sem);
+}
+
+static inline void __down_write(struct rw_semaphore *sem)
+{
+	__down_write_nested(sem, 0);
+}
+
+static inline int __down_write_trylock(struct rw_semaphore *sem)
+{
+	int tmp;
+
+	tmp = cmpxchg(&sem->count, RWSEM_UNLOCKED_VALUE,
+		      RWSEM_ACTIVE_WRITE_BIAS);
+	return tmp == RWSEM_UNLOCKED_VALUE;
+}
+
+/*
+ * unlock after reading
+ */
+static inline void __up_read(struct rw_semaphore *sem)
+{
+	int tmp;
+
+	tmp = atomic_dec_return((atomic_t *)(&sem->count));
+	if (unlikely(tmp < -1 && (tmp & RWSEM_ACTIVE_MASK) == 0))
+		rwsem_wake(sem);
+}
+
+/*
+ * unlock after writing
+ */
+static inline void __up_write(struct rw_semaphore *sem)
+{
+	if (unlikely(atomic_sub_return(RWSEM_ACTIVE_WRITE_BIAS,
+			      (atomic_t *)(&sem->count)) < 0))
+		rwsem_wake(sem);
+}
+
+/*
+ * implement atomic add functionality
+ */
+static inline void rwsem_atomic_add(int delta, struct rw_semaphore *sem)
+{
+	atomic_add(delta, (atomic_t *)(&sem->count));
+}
+
+/*
+ * downgrade write lock to read lock
+ */
+static inline void __downgrade_write(struct rw_semaphore *sem)
+{
+	int tmp;
+
+	tmp = atomic_add_return(-RWSEM_WAITING_BIAS, (atomic_t *)(&sem->count));
+	if (tmp < 0)
+		rwsem_downgrade_wake(sem);
+}
+
+/*
+ * implement exchange and add functionality
+ */
+static inline int rwsem_atomic_update(int delta, struct rw_semaphore *sem)
+{
+	return atomic_add_return(delta, (atomic_t *)(&sem->count));
+}
+
+static inline int rwsem_is_locked(struct rw_semaphore *sem)
+{
+	return (sem->count != 0);
+}
+
+#endif	/* __KERNEL__ */
+#endif	/* _ASM_POWERPC_RWSEM_H */
diff --git a/include/asm-powerpc/scatterlist.h b/arch/powerpc/include/asm/scatterlist.h
index fcf7d55afe45..fcf7d55afe45 100644
--- a/include/asm-powerpc/scatterlist.h
+++ b/arch/powerpc/include/asm/scatterlist.h
diff --git a/include/asm-powerpc/seccomp.h b/arch/powerpc/include/asm/seccomp.h
index 853765eb1f65..853765eb1f65 100644
--- a/include/asm-powerpc/seccomp.h
+++ b/arch/powerpc/include/asm/seccomp.h
diff --git a/include/asm-powerpc/sections.h b/arch/powerpc/include/asm/sections.h
index 916018e425c4..916018e425c4 100644
--- a/include/asm-powerpc/sections.h
+++ b/arch/powerpc/include/asm/sections.h
diff --git a/include/asm-powerpc/sembuf.h b/arch/powerpc/include/asm/sembuf.h
index 99a41938ae3d..99a41938ae3d 100644
--- a/include/asm-powerpc/sembuf.h
+++ b/arch/powerpc/include/asm/sembuf.h
diff --git a/include/asm-powerpc/serial.h b/arch/powerpc/include/asm/serial.h
index 3e8589b43cb2..3e8589b43cb2 100644
--- a/include/asm-powerpc/serial.h
+++ b/arch/powerpc/include/asm/serial.h
diff --git a/include/asm-powerpc/setjmp.h b/arch/powerpc/include/asm/setjmp.h
index 279d03a1eec6..279d03a1eec6 100644
--- a/include/asm-powerpc/setjmp.h
+++ b/arch/powerpc/include/asm/setjmp.h
diff --git a/include/asm-powerpc/setup.h b/arch/powerpc/include/asm/setup.h
index 817fac0a0714..817fac0a0714 100644
--- a/include/asm-powerpc/setup.h
+++ b/arch/powerpc/include/asm/setup.h
diff --git a/include/asm-powerpc/shmbuf.h b/arch/powerpc/include/asm/shmbuf.h
index 8efa39698b6c..8efa39698b6c 100644
--- a/include/asm-powerpc/shmbuf.h
+++ b/arch/powerpc/include/asm/shmbuf.h
diff --git a/include/asm-powerpc/shmparam.h b/arch/powerpc/include/asm/shmparam.h
index 5cda42a6d39e..5cda42a6d39e 100644
--- a/include/asm-powerpc/shmparam.h
+++ b/arch/powerpc/include/asm/shmparam.h
diff --git a/include/asm-powerpc/sigcontext.h b/arch/powerpc/include/asm/sigcontext.h
index 9c1f24fd5d11..9c1f24fd5d11 100644
--- a/include/asm-powerpc/sigcontext.h
+++ b/arch/powerpc/include/asm/sigcontext.h
diff --git a/include/asm-powerpc/siginfo.h b/arch/powerpc/include/asm/siginfo.h
index 12f1bce037be..12f1bce037be 100644
--- a/include/asm-powerpc/siginfo.h
+++ b/arch/powerpc/include/asm/siginfo.h
diff --git a/arch/powerpc/include/asm/signal.h b/arch/powerpc/include/asm/signal.h
new file mode 100644
index 000000000000..a7360cdd99eb
--- /dev/null
+++ b/arch/powerpc/include/asm/signal.h
@@ -0,0 +1,150 @@
+#ifndef _ASM_POWERPC_SIGNAL_H
+#define _ASM_POWERPC_SIGNAL_H
+
+#include <linux/types.h>
+
+#define _NSIG		64
+#ifdef __powerpc64__
+#define _NSIG_BPW	64
+#else
+#define _NSIG_BPW	32
+#endif
+#define _NSIG_WORDS	(_NSIG / _NSIG_BPW)
+
+typedef unsigned long old_sigset_t;		/* at least 32 bits */
+
+typedef struct {
+	unsigned long sig[_NSIG_WORDS];
+} sigset_t;
+
+#define SIGHUP		 1
+#define SIGINT		 2
+#define SIGQUIT		 3
+#define SIGILL		 4
+#define SIGTRAP		 5
+#define SIGABRT		 6
+#define SIGIOT		 6
+#define SIGBUS		 7
+#define SIGFPE		 8
+#define SIGKILL		 9
+#define SIGUSR1		10
+#define SIGSEGV		11
+#define SIGUSR2		12
+#define SIGPIPE		13
+#define SIGALRM		14
+#define SIGTERM		15
+#define SIGSTKFLT	16
+#define SIGCHLD		17
+#define SIGCONT		18
+#define SIGSTOP		19
+#define SIGTSTP		20
+#define SIGTTIN		21
+#define SIGTTOU		22
+#define SIGURG		23
+#define SIGXCPU		24
+#define SIGXFSZ		25
+#define SIGVTALRM	26
+#define SIGPROF		27
+#define SIGWINCH	28
+#define SIGIO		29
+#define SIGPOLL		SIGIO
+/*
+#define SIGLOST		29
+*/
+#define SIGPWR		30
+#define SIGSYS		31
+#define	SIGUNUSED	31
+
+/* These should not be considered constants from userland.  */
+#define SIGRTMIN	32
+#define SIGRTMAX	_NSIG
+
+/*
+ * SA_FLAGS values:
+ *
+ * SA_ONSTACK is not currently supported, but will allow sigaltstack(2).
+ * SA_RESTART flag to get restarting signals (which were the default long ago)
+ * SA_NOCLDSTOP flag to turn off SIGCHLD when children stop.
+ * SA_RESETHAND clears the handler when the signal is delivered.
+ * SA_NOCLDWAIT flag on SIGCHLD to inhibit zombies.
+ * SA_NODEFER prevents the current signal from being masked in the handler.
+ *
+ * SA_ONESHOT and SA_NOMASK are the historical Linux names for the Single
+ * Unix names RESETHAND and NODEFER respectively.
+ */
+#define SA_NOCLDSTOP	0x00000001U
+#define SA_NOCLDWAIT	0x00000002U
+#define SA_SIGINFO	0x00000004U
+#define SA_ONSTACK	0x08000000U
+#define SA_RESTART	0x10000000U
+#define SA_NODEFER	0x40000000U
+#define SA_RESETHAND	0x80000000U
+
+#define SA_NOMASK	SA_NODEFER
+#define SA_ONESHOT	SA_RESETHAND
+
+#define SA_RESTORER	0x04000000U
+
+/*
+ * sigaltstack controls
+ */
+#define SS_ONSTACK	1
+#define SS_DISABLE	2
+
+#define MINSIGSTKSZ	2048
+#define SIGSTKSZ	8192
+
+#include <asm-generic/signal.h>
+
+struct old_sigaction {
+	__sighandler_t sa_handler;
+	old_sigset_t sa_mask;
+	unsigned long sa_flags;
+	__sigrestore_t sa_restorer;
+};
+
+struct sigaction {
+	__sighandler_t sa_handler;
+	unsigned long sa_flags;
+	__sigrestore_t sa_restorer;
+	sigset_t sa_mask;		/* mask last for extensibility */
+};
+
+struct k_sigaction {
+	struct sigaction sa;
+};
+
+typedef struct sigaltstack {
+	void __user *ss_sp;
+	int ss_flags;
+	size_t ss_size;
+} stack_t;
+
+#ifdef __KERNEL__
+struct pt_regs;
+extern void do_signal(struct pt_regs *regs, unsigned long thread_info_flags);
+#define ptrace_signal_deliver(regs, cookie) do { } while (0)
+#endif /* __KERNEL__ */
+
+#ifndef __powerpc64__
+/*
+ * These are parameters to dbg_sigreturn syscall.  They enable or
+ * disable certain debugging things that can be done from signal
+ * handlers.  The dbg_sigreturn syscall *must* be called from a
+ * SA_SIGINFO signal so the ucontext can be passed to it.  It takes an
+ * array of struct sig_dbg_op, which has the debug operations to
+ * perform before returning from the signal.
+ */
+struct sig_dbg_op {
+	int dbg_type;
+	unsigned long dbg_value;
+};
+
+/* Enable or disable single-stepping.  The value sets the state. */
+#define SIG_DBG_SINGLE_STEPPING		1
+
+/* Enable or disable branch tracing.  The value sets the state. */
+#define SIG_DBG_BRANCH_TRACING		2
+#endif /* ! __powerpc64__ */
+
+#endif /* _ASM_POWERPC_SIGNAL_H */
diff --git a/arch/powerpc/include/asm/smp.h b/arch/powerpc/include/asm/smp.h
new file mode 100644
index 000000000000..4d28e1e4521b
--- /dev/null
+++ b/arch/powerpc/include/asm/smp.h
@@ -0,0 +1,127 @@
+/* 
+ * smp.h: PowerPC-specific SMP code.
+ *
+ * Original was a copy of sparc smp.h.  Now heavily modified
+ * for PPC.
+ *
+ * Copyright (C) 1996 David S. Miller (davem@caip.rutgers.edu)
+ * Copyright (C) 1996-2001 Cort Dougan <cort@fsmlabs.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#ifndef _ASM_POWERPC_SMP_H
+#define _ASM_POWERPC_SMP_H
+#ifdef __KERNEL__
+
+#include <linux/threads.h>
+#include <linux/cpumask.h>
+#include <linux/kernel.h>
+
+#ifndef __ASSEMBLY__
+
+#ifdef CONFIG_PPC64
+#include <asm/paca.h>
+#endif
+#include <asm/percpu.h>
+
+extern int boot_cpuid;
+
+extern void cpu_die(void);
+
+#ifdef CONFIG_SMP
+
+extern void smp_send_debugger_break(int cpu);
+extern void smp_message_recv(int);
+
+DECLARE_PER_CPU(unsigned int, pvr);
+
+#ifdef CONFIG_HOTPLUG_CPU
+extern void fixup_irqs(cpumask_t map);
+int generic_cpu_disable(void);
+int generic_cpu_enable(unsigned int cpu);
+void generic_cpu_die(unsigned int cpu);
+void generic_mach_cpu_die(void);
+#endif
+
+#ifdef CONFIG_PPC64
+#define raw_smp_processor_id()	(local_paca->paca_index)
+#define hard_smp_processor_id() (get_paca()->hw_cpu_id)
+#else
+/* 32-bit */
+extern int smp_hw_index[];
+
+#define raw_smp_processor_id()	(current_thread_info()->cpu)
+#define hard_smp_processor_id() 	(smp_hw_index[smp_processor_id()])
+#define get_hard_smp_processor_id(cpu)	(smp_hw_index[(cpu)])
+#define set_hard_smp_processor_id(cpu, phys)\
+					(smp_hw_index[(cpu)] = (phys))
+#endif
+
+DECLARE_PER_CPU(cpumask_t, cpu_sibling_map);
+DECLARE_PER_CPU(cpumask_t, cpu_core_map);
+extern int cpu_to_core_id(int cpu);
+
+/* Since OpenPIC has only 4 IPIs, we use slightly different message numbers.
+ *
+ * Make sure this matches openpic_request_IPIs in open_pic.c, or what shows up
+ * in /proc/interrupts will be wrong!!! --Troy */
+#define PPC_MSG_CALL_FUNCTION   0
+#define PPC_MSG_RESCHEDULE      1
+#define PPC_MSG_CALL_FUNC_SINGLE	2
+#define PPC_MSG_DEBUGGER_BREAK  3
+
+void smp_init_iSeries(void);
+void smp_init_pSeries(void);
+void smp_init_cell(void);
+void smp_init_celleb(void);
+void smp_setup_cpu_maps(void);
+void smp_setup_cpu_sibling_map(void);
+
+extern int __cpu_disable(void);
+extern void __cpu_die(unsigned int cpu);
+
+#else
+/* for UP */
+#define hard_smp_processor_id()		0
+#define smp_setup_cpu_maps()
+
+#endif /* CONFIG_SMP */
+
+#ifdef CONFIG_PPC64
+#define get_hard_smp_processor_id(CPU) (paca[(CPU)].hw_cpu_id)
+#define set_hard_smp_processor_id(CPU, VAL) \
+	do { (paca[(CPU)].hw_cpu_id = (VAL)); } while (0)
+
+extern void smp_release_cpus(void);
+
+#else
+/* 32-bit */
+#ifndef CONFIG_SMP
+extern int boot_cpuid_phys;
+#define get_hard_smp_processor_id(cpu) 	boot_cpuid_phys
+#define set_hard_smp_processor_id(cpu, phys)
+#endif
+#endif
+
+extern int smt_enabled_at_boot;
+
+extern int smp_mpic_probe(void);
+extern void smp_mpic_setup_cpu(int cpu);
+extern void smp_generic_kick_cpu(int nr);
+
+extern void smp_generic_give_timebase(void);
+extern void smp_generic_take_timebase(void);
+
+extern struct smp_ops_t *smp_ops;
+
+extern void arch_send_call_function_single_ipi(int cpu);
+extern void arch_send_call_function_ipi(cpumask_t mask);
+
+#endif /* __ASSEMBLY__ */
+
+#endif /* __KERNEL__ */
+#endif /* _ASM_POWERPC_SMP_H) */
diff --git a/include/asm-powerpc/smu.h b/arch/powerpc/include/asm/smu.h
index 7ae2753da565..7ae2753da565 100644
--- a/include/asm-powerpc/smu.h
+++ b/arch/powerpc/include/asm/smu.h
diff --git a/include/asm-powerpc/socket.h b/arch/powerpc/include/asm/socket.h
index f5a4e168e498..f5a4e168e498 100644
--- a/include/asm-powerpc/socket.h
+++ b/arch/powerpc/include/asm/socket.h
diff --git a/include/asm-powerpc/sockios.h b/arch/powerpc/include/asm/sockios.h
index 55cef7675a31..55cef7675a31 100644
--- a/include/asm-powerpc/sockios.h
+++ b/arch/powerpc/include/asm/sockios.h
diff --git a/include/asm-powerpc/sparsemem.h b/arch/powerpc/include/asm/sparsemem.h
index 54a47ea2c3aa..54a47ea2c3aa 100644
--- a/include/asm-powerpc/sparsemem.h
+++ b/arch/powerpc/include/asm/sparsemem.h
diff --git a/include/asm-powerpc/spinlock.h b/arch/powerpc/include/asm/spinlock.h
index f56a843f4705..f56a843f4705 100644
--- a/include/asm-powerpc/spinlock.h
+++ b/arch/powerpc/include/asm/spinlock.h
diff --git a/include/asm-powerpc/spinlock_types.h b/arch/powerpc/include/asm/spinlock_types.h
index 74236c9f05b1..74236c9f05b1 100644
--- a/include/asm-powerpc/spinlock_types.h
+++ b/arch/powerpc/include/asm/spinlock_types.h
diff --git a/include/asm-powerpc/spu.h b/arch/powerpc/include/asm/spu.h
index 8b2eb044270a..8b2eb044270a 100644
--- a/include/asm-powerpc/spu.h
+++ b/arch/powerpc/include/asm/spu.h
diff --git a/include/asm-powerpc/spu_csa.h b/arch/powerpc/include/asm/spu_csa.h
index a40fd491250c..a40fd491250c 100644
--- a/include/asm-powerpc/spu_csa.h
+++ b/arch/powerpc/include/asm/spu_csa.h
diff --git a/include/asm-powerpc/spu_info.h b/arch/powerpc/include/asm/spu_info.h
index 3545efbf9891..3545efbf9891 100644
--- a/include/asm-powerpc/spu_info.h
+++ b/arch/powerpc/include/asm/spu_info.h
diff --git a/include/asm-powerpc/spu_priv1.h b/arch/powerpc/include/asm/spu_priv1.h
index 25020a34ce7f..25020a34ce7f 100644
--- a/include/asm-powerpc/spu_priv1.h
+++ b/arch/powerpc/include/asm/spu_priv1.h
diff --git a/include/asm-powerpc/sstep.h b/arch/powerpc/include/asm/sstep.h
index f593b0f9b627..f593b0f9b627 100644
--- a/include/asm-powerpc/sstep.h
+++ b/arch/powerpc/include/asm/sstep.h
diff --git a/include/asm-powerpc/stat.h b/arch/powerpc/include/asm/stat.h
index e4edc510b530..e4edc510b530 100644
--- a/include/asm-powerpc/stat.h
+++ b/arch/powerpc/include/asm/stat.h
diff --git a/include/asm-powerpc/statfs.h b/arch/powerpc/include/asm/statfs.h
index 67024026c10d..67024026c10d 100644
--- a/include/asm-powerpc/statfs.h
+++ b/arch/powerpc/include/asm/statfs.h
diff --git a/include/asm-powerpc/string.h b/arch/powerpc/include/asm/string.h
index e40010abcaf1..e40010abcaf1 100644
--- a/include/asm-powerpc/string.h
+++ b/arch/powerpc/include/asm/string.h
diff --git a/include/asm-powerpc/suspend.h b/arch/powerpc/include/asm/suspend.h
index cbf2c9404c37..cbf2c9404c37 100644
--- a/include/asm-powerpc/suspend.h
+++ b/arch/powerpc/include/asm/suspend.h
diff --git a/include/asm-powerpc/synch.h b/arch/powerpc/include/asm/synch.h
index 45963e80f557..45963e80f557 100644
--- a/include/asm-powerpc/synch.h
+++ b/arch/powerpc/include/asm/synch.h
diff --git a/arch/powerpc/include/asm/syscall.h b/arch/powerpc/include/asm/syscall.h
new file mode 100644
index 000000000000..efa7f0b879f3
--- /dev/null
+++ b/arch/powerpc/include/asm/syscall.h
@@ -0,0 +1,84 @@
+/*
+ * Access to user system call parameters and results
+ *
+ * Copyright (C) 2008 Red Hat, Inc.  All rights reserved.
+ *
+ * This copyrighted material is made available to anyone wishing to use,
+ * modify, copy, or redistribute it subject to the terms and conditions
+ * of the GNU General Public License v.2.
+ *
+ * See asm-generic/syscall.h for descriptions of what we must do here.
+ */
+
+#ifndef _ASM_SYSCALL_H
+#define _ASM_SYSCALL_H	1
+
+#include <linux/sched.h>
+
+static inline long syscall_get_nr(struct task_struct *task,
+				  struct pt_regs *regs)
+{
+	return TRAP(regs) == 0xc00 ? regs->gpr[0] : -1L;
+}
+
+static inline void syscall_rollback(struct task_struct *task,
+				    struct pt_regs *regs)
+{
+	regs->gpr[3] = regs->orig_gpr3;
+}
+
+static inline long syscall_get_error(struct task_struct *task,
+				     struct pt_regs *regs)
+{
+	return (regs->ccr & 0x1000) ? -regs->gpr[3] : 0;
+}
+
+static inline long syscall_get_return_value(struct task_struct *task,
+					    struct pt_regs *regs)
+{
+	return regs->gpr[3];
+}
+
+static inline void syscall_set_return_value(struct task_struct *task,
+					    struct pt_regs *regs,
+					    int error, long val)
+{
+	if (error) {
+		regs->ccr |= 0x1000L;
+		regs->gpr[3] = -error;
+	} else {
+		regs->ccr &= ~0x1000L;
+		regs->gpr[3] = val;
+	}
+}
+
+static inline void syscall_get_arguments(struct task_struct *task,
+					 struct pt_regs *regs,
+					 unsigned int i, unsigned int n,
+					 unsigned long *args)
+{
+	BUG_ON(i + n > 6);
+#ifdef CONFIG_PPC64
+	if (test_tsk_thread_flag(task, TIF_32BIT)) {
+		/*
+		 * Zero-extend 32-bit argument values.  The high bits are
+		 * garbage ignored by the actual syscall dispatch.
+		 */
+		while (n-- > 0)
+			args[n] = (u32) regs->gpr[3 + i + n];
+		return;
+	}
+#endif
+	memcpy(args, &regs->gpr[3 + i], n * sizeof(args[0]));
+}
+
+static inline void syscall_set_arguments(struct task_struct *task,
+					 struct pt_regs *regs,
+					 unsigned int i, unsigned int n,
+					 const unsigned long *args)
+{
+	BUG_ON(i + n > 6);
+	memcpy(&regs->gpr[3 + i], args, n * sizeof(args[0]));
+}
+
+#endif	/* _ASM_SYSCALL_H */
diff --git a/arch/powerpc/include/asm/syscalls.h b/arch/powerpc/include/asm/syscalls.h
new file mode 100644
index 000000000000..eb8eb400c664
--- /dev/null
+++ b/arch/powerpc/include/asm/syscalls.h
@@ -0,0 +1,52 @@
+#ifndef __ASM_POWERPC_SYSCALLS_H
+#define __ASM_POWERPC_SYSCALLS_H
+#ifdef __KERNEL__
+
+#include <linux/compiler.h>
+#include <linux/linkage.h>
+#include <linux/types.h>
+#include <asm/signal.h>
+
+struct new_utsname;
+struct pt_regs;
+struct rtas_args;
+struct sigaction;
+
+asmlinkage unsigned long sys_mmap(unsigned long addr, size_t len,
+		unsigned long prot, unsigned long flags,
+		unsigned long fd, off_t offset);
+asmlinkage unsigned long sys_mmap2(unsigned long addr, size_t len,
+		unsigned long prot, unsigned long flags,
+		unsigned long fd, unsigned long pgoff);
+asmlinkage int sys_execve(unsigned long a0, unsigned long a1,
+		unsigned long a2, unsigned long a3, unsigned long a4,
+		unsigned long a5, struct pt_regs *regs);
+asmlinkage int sys_clone(unsigned long clone_flags, unsigned long usp,
+		int __user *parent_tidp, void __user *child_threadptr,
+		int __user *child_tidp, int p6, struct pt_regs *regs);
+asmlinkage int sys_fork(unsigned long p1, unsigned long p2,
+		unsigned long p3, unsigned long p4, unsigned long p5,
+		unsigned long p6, struct pt_regs *regs);
+asmlinkage int sys_vfork(unsigned long p1, unsigned long p2,
+		unsigned long p3, unsigned long p4, unsigned long p5,
+		unsigned long p6, struct pt_regs *regs);
+asmlinkage long sys_pipe(int __user *fildes);
+asmlinkage long sys_pipe2(int __user *fildes, int flags);
+asmlinkage long sys_rt_sigaction(int sig,
+		const struct sigaction __user *act,
+		struct sigaction __user *oact, size_t sigsetsize);
+asmlinkage int sys_ipc(uint call, int first, unsigned long second,
+		long third, void __user *ptr, long fifth);
+asmlinkage long ppc64_personality(unsigned long personality);
+asmlinkage int ppc_rtas(struct rtas_args __user *uargs);
+asmlinkage time_t sys64_time(time_t __user * tloc);
+asmlinkage long ppc_newuname(struct new_utsname __user * name);
+
+asmlinkage long sys_rt_sigsuspend(sigset_t __user *unewset,
+		size_t sigsetsize);
+asmlinkage long sys_sigaltstack(const stack_t __user *uss,
+		stack_t __user *uoss, unsigned long r5, unsigned long r6,
+		unsigned long r7, unsigned long r8, struct pt_regs *regs);
+
+#endif /* __KERNEL__ */
+#endif /* __ASM_POWERPC_SYSCALLS_H */
diff --git a/include/asm-powerpc/systbl.h b/arch/powerpc/include/asm/systbl.h
index ae7085c65692..f6cc7a43b4fa 100644
--- a/include/asm-powerpc/systbl.h
+++ b/arch/powerpc/include/asm/systbl.h
@@ -92,7 +92,7 @@ COMPAT_SYS_SPU(readlink)
 SYSCALL(uselib)
 SYSCALL(swapon)
 SYSCALL(reboot)
-SYSX(sys_ni_syscall,old32_readdir,old_readdir)
+SYSX(sys_ni_syscall,compat_sys_old_readdir,old_readdir)
 SYSCALL_SPU(mmap)
 SYSCALL_SPU(munmap)
 SYSCALL_SPU(truncate)
@@ -316,3 +316,9 @@ COMPAT_SYS(fallocate)
 SYSCALL(subpage_prot)
 COMPAT_SYS_SPU(timerfd_settime)
 COMPAT_SYS_SPU(timerfd_gettime)
+COMPAT_SYS_SPU(signalfd4)
+SYSCALL_SPU(eventfd2)
+SYSCALL_SPU(epoll_create1)
+SYSCALL_SPU(dup3)
+SYSCALL_SPU(pipe2)
+SYSCALL(inotify_init1)
diff --git a/arch/powerpc/include/asm/system.h b/arch/powerpc/include/asm/system.h
new file mode 100644
index 000000000000..d6648c143322
--- /dev/null
+++ b/arch/powerpc/include/asm/system.h
@@ -0,0 +1,548 @@
+/*
+ * Copyright (C) 1999 Cort Dougan <cort@cs.nmt.edu>
+ */
+#ifndef _ASM_POWERPC_SYSTEM_H
+#define _ASM_POWERPC_SYSTEM_H
+
+#include <linux/kernel.h>
+#include <linux/irqflags.h>
+
+#include <asm/hw_irq.h>
+
+/*
+ * Memory barrier.
+ * The sync instruction guarantees that all memory accesses initiated
+ * by this processor have been performed (with respect to all other
+ * mechanisms that access memory).  The eieio instruction is a barrier
+ * providing an ordering (separately) for (a) cacheable stores and (b)
+ * loads and stores to non-cacheable memory (e.g. I/O devices).
+ *
+ * mb() prevents loads and stores being reordered across this point.
+ * rmb() prevents loads being reordered across this point.
+ * wmb() prevents stores being reordered across this point.
+ * read_barrier_depends() prevents data-dependent loads being reordered
+ *	across this point (nop on PPC).
+ *
+ * We have to use the sync instructions for mb(), since lwsync doesn't
+ * order loads with respect to previous stores.  Lwsync is fine for
+ * rmb(), though. Note that rmb() actually uses a sync on 32-bit
+ * architectures.
+ *
+ * For wmb(), we use sync since wmb is used in drivers to order
+ * stores to system memory with respect to writes to the device.
+ * However, smp_wmb() can be a lighter-weight lwsync or eieio barrier
+ * on SMP since it is only used to order updates to system memory.
+ */
+#define mb()   __asm__ __volatile__ ("sync" : : : "memory")
+#define rmb()  __asm__ __volatile__ ("sync" : : : "memory")
+#define wmb()  __asm__ __volatile__ ("sync" : : : "memory")
+#define read_barrier_depends()  do { } while(0)
+
+#define set_mb(var, value)	do { var = value; mb(); } while (0)
+
+#ifdef __KERNEL__
+#define AT_VECTOR_SIZE_ARCH 6 /* entries in ARCH_DLINFO */
+#ifdef CONFIG_SMP
+
+#ifdef __SUBARCH_HAS_LWSYNC
+#    define SMPWMB      lwsync
+#else
+#    define SMPWMB      eieio
+#endif
+
+#define smp_mb()	mb()
+#define smp_rmb()	rmb()
+#define smp_wmb()	__asm__ __volatile__ (__stringify(SMPWMB) : : :"memory")
+#define smp_read_barrier_depends()	read_barrier_depends()
+#else
+#define smp_mb()	barrier()
+#define smp_rmb()	barrier()
+#define smp_wmb()	barrier()
+#define smp_read_barrier_depends()	do { } while(0)
+#endif /* CONFIG_SMP */
+
+/*
+ * This is a barrier which prevents following instructions from being
+ * started until the value of the argument x is known.  For example, if
+ * x is a variable loaded from memory, this prevents following
+ * instructions from being executed until the load has been performed.
+ */
+#define data_barrier(x)	\
+	asm volatile("twi 0,%0,0; isync" : : "r" (x) : "memory");
+
+struct task_struct;
+struct pt_regs;
+
+#if defined(CONFIG_DEBUGGER) || defined(CONFIG_KEXEC)
+
+extern int (*__debugger)(struct pt_regs *regs);
+extern int (*__debugger_ipi)(struct pt_regs *regs);
+extern int (*__debugger_bpt)(struct pt_regs *regs);
+extern int (*__debugger_sstep)(struct pt_regs *regs);
+extern int (*__debugger_iabr_match)(struct pt_regs *regs);
+extern int (*__debugger_dabr_match)(struct pt_regs *regs);
+extern int (*__debugger_fault_handler)(struct pt_regs *regs);
+
+#define DEBUGGER_BOILERPLATE(__NAME) \
+static inline int __NAME(struct pt_regs *regs) \
+{ \
+	if (unlikely(__ ## __NAME)) \
+		return __ ## __NAME(regs); \
+	return 0; \
+}
+
+DEBUGGER_BOILERPLATE(debugger)
+DEBUGGER_BOILERPLATE(debugger_ipi)
+DEBUGGER_BOILERPLATE(debugger_bpt)
+DEBUGGER_BOILERPLATE(debugger_sstep)
+DEBUGGER_BOILERPLATE(debugger_iabr_match)
+DEBUGGER_BOILERPLATE(debugger_dabr_match)
+DEBUGGER_BOILERPLATE(debugger_fault_handler)
+
+#else
+static inline int debugger(struct pt_regs *regs) { return 0; }
+static inline int debugger_ipi(struct pt_regs *regs) { return 0; }
+static inline int debugger_bpt(struct pt_regs *regs) { return 0; }
+static inline int debugger_sstep(struct pt_regs *regs) { return 0; }
+static inline int debugger_iabr_match(struct pt_regs *regs) { return 0; }
+static inline int debugger_dabr_match(struct pt_regs *regs) { return 0; }
+static inline int debugger_fault_handler(struct pt_regs *regs) { return 0; }
+#endif
+
+extern int set_dabr(unsigned long dabr);
+extern void do_dabr(struct pt_regs *regs, unsigned long address,
+		    unsigned long error_code);
+extern void print_backtrace(unsigned long *);
+extern void show_regs(struct pt_regs * regs);
+extern void flush_instruction_cache(void);
+extern void hard_reset_now(void);
+extern void poweroff_now(void);
+
+#ifdef CONFIG_6xx
+extern long _get_L2CR(void);
+extern long _get_L3CR(void);
+extern void _set_L2CR(unsigned long);
+extern void _set_L3CR(unsigned long);
+#else
+#define _get_L2CR()	0L
+#define _get_L3CR()	0L
+#define _set_L2CR(val)	do { } while(0)
+#define _set_L3CR(val)	do { } while(0)
+#endif
+
+extern void via_cuda_init(void);
+extern void read_rtc_time(void);
+extern void pmac_find_display(void);
+extern void giveup_fpu(struct task_struct *);
+extern void disable_kernel_fp(void);
+extern void enable_kernel_fp(void);
+extern void flush_fp_to_thread(struct task_struct *);
+extern void enable_kernel_altivec(void);
+extern void giveup_altivec(struct task_struct *);
+extern void load_up_altivec(struct task_struct *);
+extern int emulate_altivec(struct pt_regs *);
+extern void __giveup_vsx(struct task_struct *);
+extern void giveup_vsx(struct task_struct *);
+extern void enable_kernel_spe(void);
+extern void giveup_spe(struct task_struct *);
+extern void load_up_spe(struct task_struct *);
+extern int fix_alignment(struct pt_regs *);
+extern void cvt_fd(float *from, double *to, struct thread_struct *thread);
+extern void cvt_df(double *from, float *to, struct thread_struct *thread);
+
+#ifndef CONFIG_SMP
+extern void discard_lazy_cpu_state(void);
+#else
+static inline void discard_lazy_cpu_state(void)
+{
+}
+#endif
+
+#ifdef CONFIG_ALTIVEC
+extern void flush_altivec_to_thread(struct task_struct *);
+#else
+static inline void flush_altivec_to_thread(struct task_struct *t)
+{
+}
+#endif
+
+#ifdef CONFIG_VSX
+extern void flush_vsx_to_thread(struct task_struct *);
+#else
+static inline void flush_vsx_to_thread(struct task_struct *t)
+{
+}
+#endif
+
+#ifdef CONFIG_SPE
+extern void flush_spe_to_thread(struct task_struct *);
+#else
+static inline void flush_spe_to_thread(struct task_struct *t)
+{
+}
+#endif
+
+extern int call_rtas(const char *, int, int, unsigned long *, ...);
+extern void cacheable_memzero(void *p, unsigned int nb);
+extern void *cacheable_memcpy(void *, const void *, unsigned int);
+extern int do_page_fault(struct pt_regs *, unsigned long, unsigned long);
+extern void bad_page_fault(struct pt_regs *, unsigned long, int);
+extern int die(const char *, struct pt_regs *, long);
+extern void _exception(int, struct pt_regs *, int, unsigned long);
+extern void _nmask_and_or_msr(unsigned long nmask, unsigned long or_val);
+
+#ifdef CONFIG_BOOKE_WDT
+extern u32 booke_wdt_enabled;
+extern u32 booke_wdt_period;
+#endif /* CONFIG_BOOKE_WDT */
+
+struct device_node;
+extern void note_scsi_host(struct device_node *, void *);
+
+extern struct task_struct *__switch_to(struct task_struct *,
+	struct task_struct *);
+#define switch_to(prev, next, last)	((last) = __switch_to((prev), (next)))
+
+struct thread_struct;
+extern struct task_struct *_switch(struct thread_struct *prev,
+				   struct thread_struct *next);
+
+extern unsigned int rtas_data;
+extern int mem_init_done;	/* set on boot once kmalloc can be called */
+extern int init_bootmem_done;	/* set on !NUMA once bootmem is available */
+extern unsigned long memory_limit;
+extern unsigned long klimit;
+
+extern void *alloc_maybe_bootmem(size_t size, gfp_t mask);
+extern void *zalloc_maybe_bootmem(size_t size, gfp_t mask);
+
+extern int powersave_nap;	/* set if nap mode can be used in idle loop */
+
+/*
+ * Atomic exchange
+ *
+ * Changes the memory location '*ptr' to be val and returns
+ * the previous value stored there.
+ */
+static __always_inline unsigned long
+__xchg_u32(volatile void *p, unsigned long val)
+{
+	unsigned long prev;
+
+	__asm__ __volatile__(
+	LWSYNC_ON_SMP
+"1:	lwarx	%0,0,%2 \n"
+	PPC405_ERR77(0,%2)
+"	stwcx.	%3,0,%2 \n\
+	bne-	1b"
+	ISYNC_ON_SMP
+	: "=&r" (prev), "+m" (*(volatile unsigned int *)p)
+	: "r" (p), "r" (val)
+	: "cc", "memory");
+
+	return prev;
+}
+
+/*
+ * Atomic exchange
+ *
+ * Changes the memory location '*ptr' to be val and returns
+ * the previous value stored there.
+ */
+static __always_inline unsigned long
+__xchg_u32_local(volatile void *p, unsigned long val)
+{
+	unsigned long prev;
+
+	__asm__ __volatile__(
+"1:	lwarx	%0,0,%2 \n"
+	PPC405_ERR77(0,%2)
+"	stwcx.	%3,0,%2 \n\
+	bne-	1b"
+	: "=&r" (prev), "+m" (*(volatile unsigned int *)p)
+	: "r" (p), "r" (val)
+	: "cc", "memory");
+
+	return prev;
+}
+
+#ifdef CONFIG_PPC64
+static __always_inline unsigned long
+__xchg_u64(volatile void *p, unsigned long val)
+{
+	unsigned long prev;
+
+	__asm__ __volatile__(
+	LWSYNC_ON_SMP
+"1:	ldarx	%0,0,%2 \n"
+	PPC405_ERR77(0,%2)
+"	stdcx.	%3,0,%2 \n\
+	bne-	1b"
+	ISYNC_ON_SMP
+	: "=&r" (prev), "+m" (*(volatile unsigned long *)p)
+	: "r" (p), "r" (val)
+	: "cc", "memory");
+
+	return prev;
+}
+
+static __always_inline unsigned long
+__xchg_u64_local(volatile void *p, unsigned long val)
+{
+	unsigned long prev;
+
+	__asm__ __volatile__(
+"1:	ldarx	%0,0,%2 \n"
+	PPC405_ERR77(0,%2)
+"	stdcx.	%3,0,%2 \n\
+	bne-	1b"
+	: "=&r" (prev), "+m" (*(volatile unsigned long *)p)
+	: "r" (p), "r" (val)
+	: "cc", "memory");
+
+	return prev;
+}
+#endif
+
+/*
+ * This function doesn't exist, so you'll get a linker error
+ * if something tries to do an invalid xchg().
+ */
+extern void __xchg_called_with_bad_pointer(void);
+
+static __always_inline unsigned long
+__xchg(volatile void *ptr, unsigned long x, unsigned int size)
+{
+	switch (size) {
+	case 4:
+		return __xchg_u32(ptr, x);
+#ifdef CONFIG_PPC64
+	case 8:
+		return __xchg_u64(ptr, x);
+#endif
+	}
+	__xchg_called_with_bad_pointer();
+	return x;
+}
+
+static __always_inline unsigned long
+__xchg_local(volatile void *ptr, unsigned long x, unsigned int size)
+{
+	switch (size) {
+	case 4:
+		return __xchg_u32_local(ptr, x);
+#ifdef CONFIG_PPC64
+	case 8:
+		return __xchg_u64_local(ptr, x);
+#endif
+	}
+	__xchg_called_with_bad_pointer();
+	return x;
+}
+#define xchg(ptr,x)							     \
+  ({									     \
+     __typeof__(*(ptr)) _x_ = (x);					     \
+     (__typeof__(*(ptr))) __xchg((ptr), (unsigned long)_x_, sizeof(*(ptr))); \
+  })
+
+#define xchg_local(ptr,x)						     \
+  ({									     \
+     __typeof__(*(ptr)) _x_ = (x);					     \
+     (__typeof__(*(ptr))) __xchg_local((ptr),				     \
+     		(unsigned long)_x_, sizeof(*(ptr))); 			     \
+  })
+
+/*
+ * Compare and exchange - if *p == old, set it to new,
+ * and return the old value of *p.
+ */
+#define __HAVE_ARCH_CMPXCHG	1
+
+static __always_inline unsigned long
+__cmpxchg_u32(volatile unsigned int *p, unsigned long old, unsigned long new)
+{
+	unsigned int prev;
+
+	__asm__ __volatile__ (
+	LWSYNC_ON_SMP
+"1:	lwarx	%0,0,%2		# __cmpxchg_u32\n\
+	cmpw	0,%0,%3\n\
+	bne-	2f\n"
+	PPC405_ERR77(0,%2)
+"	stwcx.	%4,0,%2\n\
+	bne-	1b"
+	ISYNC_ON_SMP
+	"\n\
+2:"
+	: "=&r" (prev), "+m" (*p)
+	: "r" (p), "r" (old), "r" (new)
+	: "cc", "memory");
+
+	return prev;
+}
+
+static __always_inline unsigned long
+__cmpxchg_u32_local(volatile unsigned int *p, unsigned long old,
+			unsigned long new)
+{
+	unsigned int prev;
+
+	__asm__ __volatile__ (
+"1:	lwarx	%0,0,%2		# __cmpxchg_u32\n\
+	cmpw	0,%0,%3\n\
+	bne-	2f\n"
+	PPC405_ERR77(0,%2)
+"	stwcx.	%4,0,%2\n\
+	bne-	1b"
+	"\n\
+2:"
+	: "=&r" (prev), "+m" (*p)
+	: "r" (p), "r" (old), "r" (new)
+	: "cc", "memory");
+
+	return prev;
+}
+
+#ifdef CONFIG_PPC64
+static __always_inline unsigned long
+__cmpxchg_u64(volatile unsigned long *p, unsigned long old, unsigned long new)
+{
+	unsigned long prev;
+
+	__asm__ __volatile__ (
+	LWSYNC_ON_SMP
+"1:	ldarx	%0,0,%2		# __cmpxchg_u64\n\
+	cmpd	0,%0,%3\n\
+	bne-	2f\n\
+	stdcx.	%4,0,%2\n\
+	bne-	1b"
+	ISYNC_ON_SMP
+	"\n\
+2:"
+	: "=&r" (prev), "+m" (*p)
+	: "r" (p), "r" (old), "r" (new)
+	: "cc", "memory");
+
+	return prev;
+}
+
+static __always_inline unsigned long
+__cmpxchg_u64_local(volatile unsigned long *p, unsigned long old,
+			unsigned long new)
+{
+	unsigned long prev;
+
+	__asm__ __volatile__ (
+"1:	ldarx	%0,0,%2		# __cmpxchg_u64\n\
+	cmpd	0,%0,%3\n\
+	bne-	2f\n\
+	stdcx.	%4,0,%2\n\
+	bne-	1b"
+	"\n\
+2:"
+	: "=&r" (prev), "+m" (*p)
+	: "r" (p), "r" (old), "r" (new)
+	: "cc", "memory");
+
+	return prev;
+}
+#endif
+
+/* This function doesn't exist, so you'll get a linker error
+   if something tries to do an invalid cmpxchg().  */
+extern void __cmpxchg_called_with_bad_pointer(void);
+
+static __always_inline unsigned long
+__cmpxchg(volatile void *ptr, unsigned long old, unsigned long new,
+	  unsigned int size)
+{
+	switch (size) {
+	case 4:
+		return __cmpxchg_u32(ptr, old, new);
+#ifdef CONFIG_PPC64
+	case 8:
+		return __cmpxchg_u64(ptr, old, new);
+#endif
+	}
+	__cmpxchg_called_with_bad_pointer();
+	return old;
+}
+
+static __always_inline unsigned long
+__cmpxchg_local(volatile void *ptr, unsigned long old, unsigned long new,
+	  unsigned int size)
+{
+	switch (size) {
+	case 4:
+		return __cmpxchg_u32_local(ptr, old, new);
+#ifdef CONFIG_PPC64
+	case 8:
+		return __cmpxchg_u64_local(ptr, old, new);
+#endif
+	}
+	__cmpxchg_called_with_bad_pointer();
+	return old;
+}
+
+#define cmpxchg(ptr, o, n)						 \
+  ({									 \
+     __typeof__(*(ptr)) _o_ = (o);					 \
+     __typeof__(*(ptr)) _n_ = (n);					 \
+     (__typeof__(*(ptr))) __cmpxchg((ptr), (unsigned long)_o_,		 \
+				    (unsigned long)_n_, sizeof(*(ptr))); \
+  })
+
+
+#define cmpxchg_local(ptr, o, n)					 \
+  ({									 \
+     __typeof__(*(ptr)) _o_ = (o);					 \
+     __typeof__(*(ptr)) _n_ = (n);					 \
+     (__typeof__(*(ptr))) __cmpxchg_local((ptr), (unsigned long)_o_,	 \
+				    (unsigned long)_n_, sizeof(*(ptr))); \
+  })
+
+#ifdef CONFIG_PPC64
+/*
+ * We handle most unaligned accesses in hardware. On the other hand 
+ * unaligned DMA can be very expensive on some ppc64 IO chips (it does
+ * powers of 2 writes until it reaches sufficient alignment).
+ *
+ * Based on this we disable the IP header alignment in network drivers.
+ * We also modify NET_SKB_PAD to be a cacheline in size, thus maintaining
+ * cacheline alignment of buffers.
+ */
+#define NET_IP_ALIGN	0
+#define NET_SKB_PAD	L1_CACHE_BYTES
+
+#define cmpxchg64(ptr, o, n)						\
+  ({									\
+	BUILD_BUG_ON(sizeof(*(ptr)) != 8);				\
+	cmpxchg((ptr), (o), (n));					\
+  })
+#define cmpxchg64_local(ptr, o, n)					\
+  ({									\
+	BUILD_BUG_ON(sizeof(*(ptr)) != 8);				\
+	cmpxchg_local((ptr), (o), (n));					\
+  })
+#else
+#include <asm-generic/cmpxchg-local.h>
+#define cmpxchg64_local(ptr, o, n) __cmpxchg64_local_generic((ptr), (o), (n))
+#endif
+
+#define arch_align_stack(x) (x)
+
+/* Used in very early kernel initialization. */
+extern unsigned long reloc_offset(void);
+extern unsigned long add_reloc_offset(unsigned long);
+extern void reloc_got2(unsigned long);
+
+#define PTRRELOC(x)	((typeof(x)) add_reloc_offset((unsigned long)(x)))
+
+#ifdef CONFIG_VIRT_CPU_ACCOUNTING
+extern void account_system_vtime(struct task_struct *);
+#endif
+
+extern struct dentry *powerpc_debugfs_root;
+
+#endif /* __KERNEL__ */
+#endif /* _ASM_POWERPC_SYSTEM_H */
diff --git a/include/asm-powerpc/tce.h b/arch/powerpc/include/asm/tce.h
index f663634cccc9..f663634cccc9 100644
--- a/include/asm-powerpc/tce.h
+++ b/arch/powerpc/include/asm/tce.h
diff --git a/include/asm-powerpc/termbits.h b/arch/powerpc/include/asm/termbits.h
index 6698188ca550..6698188ca550 100644
--- a/include/asm-powerpc/termbits.h
+++ b/arch/powerpc/include/asm/termbits.h
diff --git a/include/asm-powerpc/termios.h b/arch/powerpc/include/asm/termios.h
index 2c14fea07c8a..2c14fea07c8a 100644
--- a/include/asm-powerpc/termios.h
+++ b/arch/powerpc/include/asm/termios.h
diff --git a/arch/powerpc/include/asm/thread_info.h b/arch/powerpc/include/asm/thread_info.h
new file mode 100644
index 000000000000..9665a26a253a
--- /dev/null
+++ b/arch/powerpc/include/asm/thread_info.h
@@ -0,0 +1,161 @@
+/* thread_info.h: PowerPC low-level thread information
+ * adapted from the i386 version by Paul Mackerras
+ *
+ * Copyright (C) 2002  David Howells (dhowells@redhat.com)
+ * - Incorporating suggestions made by Linus Torvalds and Dave Miller
+ */
+
+#ifndef _ASM_POWERPC_THREAD_INFO_H
+#define _ASM_POWERPC_THREAD_INFO_H
+
+#ifdef __KERNEL__
+
+/* We have 8k stacks on ppc32 and 16k on ppc64 */
+
+#ifdef CONFIG_PPC64
+#define THREAD_SHIFT		14
+#else
+#define THREAD_SHIFT		13
+#endif
+
+#define THREAD_SIZE		(1 << THREAD_SHIFT)
+
+#ifndef __ASSEMBLY__
+#include <linux/cache.h>
+#include <asm/processor.h>
+#include <asm/page.h>
+#include <linux/stringify.h>
+
+/*
+ * low level task data.
+ */
+struct thread_info {
+	struct task_struct *task;		/* main task structure */
+	struct exec_domain *exec_domain;	/* execution domain */
+	int		cpu;			/* cpu we're on */
+	int		preempt_count;		/* 0 => preemptable,
+						   <0 => BUG */
+	struct restart_block restart_block;
+	unsigned long	local_flags;		/* private flags for thread */
+
+	/* low level flags - has atomic operations done on it */
+	unsigned long	flags ____cacheline_aligned_in_smp;
+};
+
+/*
+ * macros/functions for gaining access to the thread information structure
+ *
+ * preempt_count needs to be 1 initially, until the scheduler is functional.
+ */
+#define INIT_THREAD_INFO(tsk)			\
+{						\
+	.task =		&tsk,			\
+	.exec_domain =	&default_exec_domain,	\
+	.cpu =		0,			\
+	.preempt_count = 1,			\
+	.restart_block = {			\
+		.fn = do_no_restart_syscall,	\
+	},					\
+	.flags =	0,			\
+}
+
+#define init_thread_info	(init_thread_union.thread_info)
+#define init_stack		(init_thread_union.stack)
+
+/* thread information allocation */
+
+#if THREAD_SHIFT >= PAGE_SHIFT
+
+#define THREAD_SIZE_ORDER	(THREAD_SHIFT - PAGE_SHIFT)
+
+#else /* THREAD_SHIFT < PAGE_SHIFT */
+
+#define __HAVE_ARCH_THREAD_INFO_ALLOCATOR
+
+extern struct thread_info *alloc_thread_info(struct task_struct *tsk);
+extern void free_thread_info(struct thread_info *ti);
+
+#endif /* THREAD_SHIFT < PAGE_SHIFT */
+
+/* how to get the thread information struct from C */
+static inline struct thread_info *current_thread_info(void)
+{
+	register unsigned long sp asm("r1");
+
+	/* gcc4, at least, is smart enough to turn this into a single
+	 * rlwinm for ppc32 and clrrdi for ppc64 */
+	return (struct thread_info *)(sp & ~(THREAD_SIZE-1));
+}
+
+#endif /* __ASSEMBLY__ */
+
+#define PREEMPT_ACTIVE		0x10000000
+
+/*
+ * thread information flag bit numbers
+ */
+#define TIF_SYSCALL_TRACE	0	/* syscall trace active */
+#define TIF_SIGPENDING		1	/* signal pending */
+#define TIF_NEED_RESCHED	2	/* rescheduling necessary */
+#define TIF_POLLING_NRFLAG	3	/* true if poll_idle() is polling
+					   TIF_NEED_RESCHED */
+#define TIF_32BIT		4	/* 32 bit binary */
+#define TIF_PERFMON_WORK	5	/* work for pfm_handle_work() */
+#define TIF_PERFMON_CTXSW	6	/* perfmon needs ctxsw calls */
+#define TIF_SYSCALL_AUDIT	7	/* syscall auditing active */
+#define TIF_SINGLESTEP		8	/* singlestepping active */
+#define TIF_MEMDIE		9
+#define TIF_SECCOMP		10	/* secure computing */
+#define TIF_RESTOREALL		11	/* Restore all regs (implies NOERROR) */
+#define TIF_NOERROR		12	/* Force successful syscall return */
+#define TIF_NOTIFY_RESUME	13	/* callback before returning to user */
+#define TIF_FREEZE		14	/* Freezing for suspend */
+#define TIF_RUNLATCH		15	/* Is the runlatch enabled? */
+#define TIF_ABI_PENDING		16	/* 32/64 bit switch needed */
+
+/* as above, but as bit values */
+#define _TIF_SYSCALL_TRACE	(1<<TIF_SYSCALL_TRACE)
+#define _TIF_SIGPENDING		(1<<TIF_SIGPENDING)
+#define _TIF_NEED_RESCHED	(1<<TIF_NEED_RESCHED)
+#define _TIF_POLLING_NRFLAG	(1<<TIF_POLLING_NRFLAG)
+#define _TIF_32BIT		(1<<TIF_32BIT)
+#define _TIF_PERFMON_WORK	(1<<TIF_PERFMON_WORK)
+#define _TIF_PERFMON_CTXSW	(1<<TIF_PERFMON_CTXSW)
+#define _TIF_SYSCALL_AUDIT	(1<<TIF_SYSCALL_AUDIT)
+#define _TIF_SINGLESTEP		(1<<TIF_SINGLESTEP)
+#define _TIF_SECCOMP		(1<<TIF_SECCOMP)
+#define _TIF_RESTOREALL		(1<<TIF_RESTOREALL)
+#define _TIF_NOERROR		(1<<TIF_NOERROR)
+#define _TIF_NOTIFY_RESUME	(1<<TIF_NOTIFY_RESUME)
+#define _TIF_FREEZE		(1<<TIF_FREEZE)
+#define _TIF_RUNLATCH		(1<<TIF_RUNLATCH)
+#define _TIF_ABI_PENDING	(1<<TIF_ABI_PENDING)
+#define _TIF_SYSCALL_T_OR_A	(_TIF_SYSCALL_TRACE|_TIF_SYSCALL_AUDIT|_TIF_SECCOMP)
+
+#define _TIF_USER_WORK_MASK	(_TIF_SIGPENDING | _TIF_NEED_RESCHED | \
+				 _TIF_NOTIFY_RESUME)
+#define _TIF_PERSYSCALL_MASK	(_TIF_RESTOREALL|_TIF_NOERROR)
+
+/* Bits in local_flags */
+/* Don't move TLF_NAPPING without adjusting the code in entry_32.S */
+#define TLF_NAPPING		0	/* idle thread enabled NAP mode */
+#define TLF_SLEEPING		1	/* suspend code enabled SLEEP mode */
+#define TLF_RESTORE_SIGMASK	2	/* Restore signal mask in do_signal */
+
+#define _TLF_NAPPING		(1 << TLF_NAPPING)
+#define _TLF_SLEEPING		(1 << TLF_SLEEPING)
+#define _TLF_RESTORE_SIGMASK	(1 << TLF_RESTORE_SIGMASK)
+
+#ifndef __ASSEMBLY__
+#define HAVE_SET_RESTORE_SIGMASK	1
+static inline void set_restore_sigmask(void)
+{
+	struct thread_info *ti = current_thread_info();
+	ti->local_flags |= _TLF_RESTORE_SIGMASK;
+	set_bit(TIF_SIGPENDING, &ti->flags);
+}
+#endif	/* !__ASSEMBLY__ */
+
+#endif /* __KERNEL__ */
+
+#endif /* _ASM_POWERPC_THREAD_INFO_H */
diff --git a/include/asm-powerpc/time.h b/arch/powerpc/include/asm/time.h
index febd581ec9b0..febd581ec9b0 100644
--- a/include/asm-powerpc/time.h
+++ b/arch/powerpc/include/asm/time.h
diff --git a/include/asm-powerpc/timex.h b/arch/powerpc/include/asm/timex.h
index c55e14f7ef44..c55e14f7ef44 100644
--- a/include/asm-powerpc/timex.h
+++ b/arch/powerpc/include/asm/timex.h
diff --git a/include/asm-powerpc/tlb.h b/arch/powerpc/include/asm/tlb.h
index e20ff7541f36..e20ff7541f36 100644
--- a/include/asm-powerpc/tlb.h
+++ b/arch/powerpc/include/asm/tlb.h
diff --git a/arch/powerpc/include/asm/tlbflush.h b/arch/powerpc/include/asm/tlbflush.h
new file mode 100644
index 000000000000..361cd5c7a32b
--- /dev/null
+++ b/arch/powerpc/include/asm/tlbflush.h
@@ -0,0 +1,166 @@
+#ifndef _ASM_POWERPC_TLBFLUSH_H
+#define _ASM_POWERPC_TLBFLUSH_H
+
+/*
+ * TLB flushing:
+ *
+ *  - flush_tlb_mm(mm) flushes the specified mm context TLB's
+ *  - flush_tlb_page(vma, vmaddr) flushes one page
+ *  - flush_tlb_page_nohash(vma, vmaddr) flushes one page if SW loaded TLB
+ *  - flush_tlb_range(vma, start, end) flushes a range of pages
+ *  - flush_tlb_kernel_range(start, end) flushes a range of kernel pages
+ *
+ *  This program is free software; you can redistribute it and/or
+ *  modify it under the terms of the GNU General Public License
+ *  as published by the Free Software Foundation; either version
+ *  2 of the License, or (at your option) any later version.
+ */
+#ifdef __KERNEL__
+
+#if defined(CONFIG_4xx) || defined(CONFIG_8xx) || defined(CONFIG_FSL_BOOKE)
+/*
+ * TLB flushing for software loaded TLB chips
+ *
+ * TODO: (CONFIG_FSL_BOOKE) determine if flush_tlb_range &
+ * flush_tlb_kernel_range are best implemented as tlbia vs
+ * specific tlbie's
+ */
+
+#include <linux/mm.h>
+
+extern void _tlbie(unsigned long address, unsigned int pid);
+
+#if defined(CONFIG_40x) || defined(CONFIG_8xx)
+#define _tlbia()	asm volatile ("tlbia; sync" : : : "memory")
+#else /* CONFIG_44x || CONFIG_FSL_BOOKE */
+extern void _tlbia(void);
+#endif
+
+static inline void flush_tlb_mm(struct mm_struct *mm)
+{
+	_tlbia();
+}
+
+static inline void flush_tlb_page(struct vm_area_struct *vma,
+				  unsigned long vmaddr)
+{
+	_tlbie(vmaddr, vma ? vma->vm_mm->context.id : 0);
+}
+
+static inline void flush_tlb_page_nohash(struct vm_area_struct *vma,
+					 unsigned long vmaddr)
+{
+	_tlbie(vmaddr, vma ? vma->vm_mm->context.id : 0);
+}
+
+static inline void flush_tlb_range(struct vm_area_struct *vma,
+				   unsigned long start, unsigned long end)
+{
+	_tlbia();
+}
+
+static inline void flush_tlb_kernel_range(unsigned long start,
+					  unsigned long end)
+{
+	_tlbia();
+}
+
+#elif defined(CONFIG_PPC32)
+/*
+ * TLB flushing for "classic" hash-MMMU 32-bit CPUs, 6xx, 7xx, 7xxx
+ */
+extern void _tlbie(unsigned long address);
+extern void _tlbia(void);
+
+extern void flush_tlb_mm(struct mm_struct *mm);
+extern void flush_tlb_page(struct vm_area_struct *vma, unsigned long vmaddr);
+extern void flush_tlb_page_nohash(struct vm_area_struct *vma, unsigned long addr);
+extern void flush_tlb_range(struct vm_area_struct *vma, unsigned long start,
+			    unsigned long end);
+extern void flush_tlb_kernel_range(unsigned long start, unsigned long end);
+
+#else
+/*
+ * TLB flushing for 64-bit has-MMU CPUs
+ */
+
+#include <linux/percpu.h>
+#include <asm/page.h>
+
+#define PPC64_TLB_BATCH_NR 192
+
+struct ppc64_tlb_batch {
+	int			active;
+	unsigned long		index;
+	struct mm_struct	*mm;
+	real_pte_t		pte[PPC64_TLB_BATCH_NR];
+	unsigned long		vaddr[PPC64_TLB_BATCH_NR];
+	unsigned int		psize;
+	int			ssize;
+};
+DECLARE_PER_CPU(struct ppc64_tlb_batch, ppc64_tlb_batch);
+
+extern void __flush_tlb_pending(struct ppc64_tlb_batch *batch);
+
+extern void hpte_need_flush(struct mm_struct *mm, unsigned long addr,
+			    pte_t *ptep, unsigned long pte, int huge);
+
+#define __HAVE_ARCH_ENTER_LAZY_MMU_MODE
+
+static inline void arch_enter_lazy_mmu_mode(void)
+{
+	struct ppc64_tlb_batch *batch = &__get_cpu_var(ppc64_tlb_batch);
+
+	batch->active = 1;
+}
+
+static inline void arch_leave_lazy_mmu_mode(void)
+{
+	struct ppc64_tlb_batch *batch = &__get_cpu_var(ppc64_tlb_batch);
+
+	if (batch->index)
+		__flush_tlb_pending(batch);
+	batch->active = 0;
+}
+
+#define arch_flush_lazy_mmu_mode()      do {} while (0)
+
+
+extern void flush_hash_page(unsigned long va, real_pte_t pte, int psize,
+			    int ssize, int local);
+extern void flush_hash_range(unsigned long number, int local);
+
+
+static inline void flush_tlb_mm(struct mm_struct *mm)
+{
+}
+
+static inline void flush_tlb_page(struct vm_area_struct *vma,
+				  unsigned long vmaddr)
+{
+}
+
+static inline void flush_tlb_page_nohash(struct vm_area_struct *vma,
+					 unsigned long vmaddr)
+{
+}
+
+static inline void flush_tlb_range(struct vm_area_struct *vma,
+				   unsigned long start, unsigned long end)
+{
+}
+
+static inline void flush_tlb_kernel_range(unsigned long start,
+					  unsigned long end)
+{
+}
+
+/* Private function for use by PCI IO mapping code */
+extern void __flush_hash_table_range(struct mm_struct *mm, unsigned long start,
+				     unsigned long end);
+
+
+#endif
+
+#endif /*__KERNEL__ */
+#endif /* _ASM_POWERPC_TLBFLUSH_H */
diff --git a/arch/powerpc/include/asm/topology.h b/arch/powerpc/include/asm/topology.h
new file mode 100644
index 000000000000..c32da6f97999
--- /dev/null
+++ b/arch/powerpc/include/asm/topology.h
@@ -0,0 +1,117 @@
+#ifndef _ASM_POWERPC_TOPOLOGY_H
+#define _ASM_POWERPC_TOPOLOGY_H
+#ifdef __KERNEL__
+
+
+struct sys_device;
+struct device_node;
+
+#ifdef CONFIG_NUMA
+
+#include <asm/mmzone.h>
+
+static inline int cpu_to_node(int cpu)
+{
+	return numa_cpu_lookup_table[cpu];
+}
+
+#define parent_node(node)	(node)
+
+static inline cpumask_t node_to_cpumask(int node)
+{
+	return numa_cpumask_lookup_table[node];
+}
+
+static inline int node_to_first_cpu(int node)
+{
+	cpumask_t tmp;
+	tmp = node_to_cpumask(node);
+	return first_cpu(tmp);
+}
+
+int of_node_to_nid(struct device_node *device);
+
+struct pci_bus;
+#ifdef CONFIG_PCI
+extern int pcibus_to_node(struct pci_bus *bus);
+#else
+static inline int pcibus_to_node(struct pci_bus *bus)
+{
+	return -1;
+}
+#endif
+
+#define pcibus_to_cpumask(bus)	(pcibus_to_node(bus) == -1 ? \
+					CPU_MASK_ALL : \
+					node_to_cpumask(pcibus_to_node(bus)) \
+				)
+
+/* sched_domains SD_NODE_INIT for PPC64 machines */
+#define SD_NODE_INIT (struct sched_domain) {		\
+	.span			= CPU_MASK_NONE,	\
+	.parent			= NULL,			\
+	.child			= NULL,			\
+	.groups			= NULL,			\
+	.min_interval		= 8,			\
+	.max_interval		= 32,			\
+	.busy_factor		= 32,			\
+	.imbalance_pct		= 125,			\
+	.cache_nice_tries	= 1,			\
+	.busy_idx		= 3,			\
+	.idle_idx		= 1,			\
+	.newidle_idx		= 2,			\
+	.wake_idx		= 1,			\
+	.flags			= SD_LOAD_BALANCE	\
+				| SD_BALANCE_EXEC	\
+				| SD_BALANCE_NEWIDLE	\
+				| SD_WAKE_IDLE		\
+				| SD_SERIALIZE		\
+				| SD_WAKE_BALANCE,	\
+	.last_balance		= jiffies,		\
+	.balance_interval	= 1,			\
+	.nr_balance_failed	= 0,			\
+}
+
+extern void __init dump_numa_cpu_topology(void);
+
+extern int sysfs_add_device_to_node(struct sys_device *dev, int nid);
+extern void sysfs_remove_device_from_node(struct sys_device *dev, int nid);
+
+#else
+
+static inline int of_node_to_nid(struct device_node *device)
+{
+	return 0;
+}
+
+static inline void dump_numa_cpu_topology(void) {}
+
+static inline int sysfs_add_device_to_node(struct sys_device *dev, int nid)
+{
+	return 0;
+}
+
+static inline void sysfs_remove_device_from_node(struct sys_device *dev,
+						int nid)
+{
+}
+
+#endif /* CONFIG_NUMA */
+
+#include <asm-generic/topology.h>
+
+#ifdef CONFIG_SMP
+#include <asm/cputable.h>
+#define smt_capable()		(cpu_has_feature(CPU_FTR_SMT))
+
+#ifdef CONFIG_PPC64
+#include <asm/smp.h>
+
+#define topology_thread_siblings(cpu)	(per_cpu(cpu_sibling_map, cpu))
+#define topology_core_siblings(cpu)	(per_cpu(cpu_core_map, cpu))
+#define topology_core_id(cpu)		(cpu_to_core_id(cpu))
+#endif
+#endif
+
+#endif /* __KERNEL__ */
+#endif	/* _ASM_POWERPC_TOPOLOGY_H */
diff --git a/include/asm-powerpc/tsi108.h b/arch/powerpc/include/asm/tsi108.h
index f8b60793b7a9..f8b60793b7a9 100644
--- a/include/asm-powerpc/tsi108.h
+++ b/arch/powerpc/include/asm/tsi108.h
diff --git a/include/asm-powerpc/tsi108_irq.h b/arch/powerpc/include/asm/tsi108_irq.h
index 6ed93979fbe4..6ed93979fbe4 100644
--- a/include/asm-powerpc/tsi108_irq.h
+++ b/arch/powerpc/include/asm/tsi108_irq.h
diff --git a/include/asm-powerpc/tsi108_pci.h b/arch/powerpc/include/asm/tsi108_pci.h
index 5653d7cc3e24..5653d7cc3e24 100644
--- a/include/asm-powerpc/tsi108_pci.h
+++ b/arch/powerpc/include/asm/tsi108_pci.h
diff --git a/include/asm-powerpc/types.h b/arch/powerpc/include/asm/types.h
index d3374bc865ba..d3374bc865ba 100644
--- a/include/asm-powerpc/types.h
+++ b/arch/powerpc/include/asm/types.h
diff --git a/include/asm-powerpc/uaccess.h b/arch/powerpc/include/asm/uaccess.h
index bd0fb8495154..bd0fb8495154 100644
--- a/include/asm-powerpc/uaccess.h
+++ b/arch/powerpc/include/asm/uaccess.h
diff --git a/include/asm-powerpc/ucc.h b/arch/powerpc/include/asm/ucc.h
index 46b09ba6bead..46b09ba6bead 100644
--- a/include/asm-powerpc/ucc.h
+++ b/arch/powerpc/include/asm/ucc.h
diff --git a/include/asm-powerpc/ucc_fast.h b/arch/powerpc/include/asm/ucc_fast.h
index fce16abe7ee1..839aab8bf37d 100644
--- a/include/asm-powerpc/ucc_fast.h
+++ b/arch/powerpc/include/asm/ucc_fast.h
@@ -1,6 +1,4 @@
 /*
- * include/asm-powerpc/ucc_fast.h
- *
  * Internal header file for UCC FAST unit routines.
  *
  * Copyright (C) 2006 Freescale Semicondutor, Inc. All rights reserved.
diff --git a/include/asm-powerpc/ucc_slow.h b/arch/powerpc/include/asm/ucc_slow.h
index 0980e6ad335b..0980e6ad335b 100644
--- a/include/asm-powerpc/ucc_slow.h
+++ b/arch/powerpc/include/asm/ucc_slow.h
diff --git a/include/asm-powerpc/ucontext.h b/arch/powerpc/include/asm/ucontext.h
index d9a4ddf0cc86..d9a4ddf0cc86 100644
--- a/include/asm-powerpc/ucontext.h
+++ b/arch/powerpc/include/asm/ucontext.h
diff --git a/include/asm-powerpc/udbg.h b/arch/powerpc/include/asm/udbg.h
index 6418ceea44b7..6418ceea44b7 100644
--- a/include/asm-powerpc/udbg.h
+++ b/arch/powerpc/include/asm/udbg.h
diff --git a/include/asm-powerpc/uic.h b/arch/powerpc/include/asm/uic.h
index 970eb7e2186a..597edfcae3d6 100644
--- a/include/asm-powerpc/uic.h
+++ b/arch/powerpc/include/asm/uic.h
@@ -1,6 +1,4 @@
 /*
- * include/asm-powerpc/uic.h
- *
  * IBM PPC4xx UIC external definitions and structure.
  *
  * Maintainer: David Gibson <dwg@au1.ibm.com>
diff --git a/include/asm-powerpc/unaligned.h b/arch/powerpc/include/asm/unaligned.h
index 5f1b1e3c2137..5f1b1e3c2137 100644
--- a/include/asm-powerpc/unaligned.h
+++ b/arch/powerpc/include/asm/unaligned.h
diff --git a/include/asm-powerpc/uninorth.h b/arch/powerpc/include/asm/uninorth.h
index f737732c3861..f737732c3861 100644
--- a/include/asm-powerpc/uninorth.h
+++ b/arch/powerpc/include/asm/uninorth.h
diff --git a/arch/powerpc/include/asm/unistd.h b/arch/powerpc/include/asm/unistd.h
new file mode 100644
index 000000000000..e07d0c76ed77
--- /dev/null
+++ b/arch/powerpc/include/asm/unistd.h
@@ -0,0 +1,398 @@
+#ifndef _ASM_POWERPC_UNISTD_H_
+#define _ASM_POWERPC_UNISTD_H_
+
+/*
+ * This file contains the system call numbers.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#define __NR_restart_syscall	  0
+#define __NR_exit		  1
+#define __NR_fork		  2
+#define __NR_read		  3
+#define __NR_write		  4
+#define __NR_open		  5
+#define __NR_close		  6
+#define __NR_waitpid		  7
+#define __NR_creat		  8
+#define __NR_link		  9
+#define __NR_unlink		 10
+#define __NR_execve		 11
+#define __NR_chdir		 12
+#define __NR_time		 13
+#define __NR_mknod		 14
+#define __NR_chmod		 15
+#define __NR_lchown		 16
+#define __NR_break		 17
+#define __NR_oldstat		 18
+#define __NR_lseek		 19
+#define __NR_getpid		 20
+#define __NR_mount		 21
+#define __NR_umount		 22
+#define __NR_setuid		 23
+#define __NR_getuid		 24
+#define __NR_stime		 25
+#define __NR_ptrace		 26
+#define __NR_alarm		 27
+#define __NR_oldfstat		 28
+#define __NR_pause		 29
+#define __NR_utime		 30
+#define __NR_stty		 31
+#define __NR_gtty		 32
+#define __NR_access		 33
+#define __NR_nice		 34
+#define __NR_ftime		 35
+#define __NR_sync		 36
+#define __NR_kill		 37
+#define __NR_rename		 38
+#define __NR_mkdir		 39
+#define __NR_rmdir		 40
+#define __NR_dup		 41
+#define __NR_pipe		 42
+#define __NR_times		 43
+#define __NR_prof		 44
+#define __NR_brk		 45
+#define __NR_setgid		 46
+#define __NR_getgid		 47
+#define __NR_signal		 48
+#define __NR_geteuid		 49
+#define __NR_getegid		 50
+#define __NR_acct		 51
+#define __NR_umount2		 52
+#define __NR_lock		 53
+#define __NR_ioctl		 54
+#define __NR_fcntl		 55
+#define __NR_mpx		 56
+#define __NR_setpgid		 57
+#define __NR_ulimit		 58
+#define __NR_oldolduname	 59
+#define __NR_umask		 60
+#define __NR_chroot		 61
+#define __NR_ustat		 62
+#define __NR_dup2		 63
+#define __NR_getppid		 64
+#define __NR_getpgrp		 65
+#define __NR_setsid		 66
+#define __NR_sigaction		 67
+#define __NR_sgetmask		 68
+#define __NR_ssetmask		 69
+#define __NR_setreuid		 70
+#define __NR_setregid		 71
+#define __NR_sigsuspend		 72
+#define __NR_sigpending		 73
+#define __NR_sethostname	 74
+#define __NR_setrlimit		 75
+#define __NR_getrlimit		 76
+#define __NR_getrusage		 77
+#define __NR_gettimeofday	 78
+#define __NR_settimeofday	 79
+#define __NR_getgroups		 80
+#define __NR_setgroups		 81
+#define __NR_select		 82
+#define __NR_symlink		 83
+#define __NR_oldlstat		 84
+#define __NR_readlink		 85
+#define __NR_uselib		 86
+#define __NR_swapon		 87
+#define __NR_reboot		 88
+#define __NR_readdir		 89
+#define __NR_mmap		 90
+#define __NR_munmap		 91
+#define __NR_truncate		 92
+#define __NR_ftruncate		 93
+#define __NR_fchmod		 94
+#define __NR_fchown		 95
+#define __NR_getpriority	 96
+#define __NR_setpriority	 97
+#define __NR_profil		 98
+#define __NR_statfs		 99
+#define __NR_fstatfs		100
+#define __NR_ioperm		101
+#define __NR_socketcall		102
+#define __NR_syslog		103
+#define __NR_setitimer		104
+#define __NR_getitimer		105
+#define __NR_stat		106
+#define __NR_lstat		107
+#define __NR_fstat		108
+#define __NR_olduname		109
+#define __NR_iopl		110
+#define __NR_vhangup		111
+#define __NR_idle		112
+#define __NR_vm86		113
+#define __NR_wait4		114
+#define __NR_swapoff		115
+#define __NR_sysinfo		116
+#define __NR_ipc		117
+#define __NR_fsync		118
+#define __NR_sigreturn		119
+#define __NR_clone		120
+#define __NR_setdomainname	121
+#define __NR_uname		122
+#define __NR_modify_ldt		123
+#define __NR_adjtimex		124
+#define __NR_mprotect		125
+#define __NR_sigprocmask	126
+#define __NR_create_module	127
+#define __NR_init_module	128
+#define __NR_delete_module	129
+#define __NR_get_kernel_syms	130
+#define __NR_quotactl		131
+#define __NR_getpgid		132
+#define __NR_fchdir		133
+#define __NR_bdflush		134
+#define __NR_sysfs		135
+#define __NR_personality	136
+#define __NR_afs_syscall	137 /* Syscall for Andrew File System */
+#define __NR_setfsuid		138
+#define __NR_setfsgid		139
+#define __NR__llseek		140
+#define __NR_getdents		141
+#define __NR__newselect		142
+#define __NR_flock		143
+#define __NR_msync		144
+#define __NR_readv		145
+#define __NR_writev		146
+#define __NR_getsid		147
+#define __NR_fdatasync		148
+#define __NR__sysctl		149
+#define __NR_mlock		150
+#define __NR_munlock		151
+#define __NR_mlockall		152
+#define __NR_munlockall		153
+#define __NR_sched_setparam		154
+#define __NR_sched_getparam		155
+#define __NR_sched_setscheduler		156
+#define __NR_sched_getscheduler		157
+#define __NR_sched_yield		158
+#define __NR_sched_get_priority_max	159
+#define __NR_sched_get_priority_min	160
+#define __NR_sched_rr_get_interval	161
+#define __NR_nanosleep		162
+#define __NR_mremap		163
+#define __NR_setresuid		164
+#define __NR_getresuid		165
+#define __NR_query_module	166
+#define __NR_poll		167
+#define __NR_nfsservctl		168
+#define __NR_setresgid		169
+#define __NR_getresgid		170
+#define __NR_prctl		171
+#define __NR_rt_sigreturn	172
+#define __NR_rt_sigaction	173
+#define __NR_rt_sigprocmask	174
+#define __NR_rt_sigpending	175
+#define __NR_rt_sigtimedwait	176
+#define __NR_rt_sigqueueinfo	177
+#define __NR_rt_sigsuspend	178
+#define __NR_pread64		179
+#define __NR_pwrite64		180
+#define __NR_chown		181
+#define __NR_getcwd		182
+#define __NR_capget		183
+#define __NR_capset		184
+#define __NR_sigaltstack	185
+#define __NR_sendfile		186
+#define __NR_getpmsg		187	/* some people actually want streams */
+#define __NR_putpmsg		188	/* some people actually want streams */
+#define __NR_vfork		189
+#define __NR_ugetrlimit		190	/* SuS compliant getrlimit */
+#define __NR_readahead		191
+#ifndef __powerpc64__			/* these are 32-bit only */
+#define __NR_mmap2		192
+#define __NR_truncate64		193
+#define __NR_ftruncate64	194
+#define __NR_stat64		195
+#define __NR_lstat64		196
+#define __NR_fstat64		197
+#endif
+#define __NR_pciconfig_read	198
+#define __NR_pciconfig_write	199
+#define __NR_pciconfig_iobase	200
+#define __NR_multiplexer	201
+#define __NR_getdents64		202
+#define __NR_pivot_root		203
+#ifndef __powerpc64__
+#define __NR_fcntl64		204
+#endif
+#define __NR_madvise		205
+#define __NR_mincore		206
+#define __NR_gettid		207
+#define __NR_tkill		208
+#define __NR_setxattr		209
+#define __NR_lsetxattr		210
+#define __NR_fsetxattr		211
+#define __NR_getxattr		212
+#define __NR_lgetxattr		213
+#define __NR_fgetxattr		214
+#define __NR_listxattr		215
+#define __NR_llistxattr		216
+#define __NR_flistxattr		217
+#define __NR_removexattr	218
+#define __NR_lremovexattr	219
+#define __NR_fremovexattr	220
+#define __NR_futex		221
+#define __NR_sched_setaffinity	222
+#define __NR_sched_getaffinity	223
+/* 224 currently unused */
+#define __NR_tuxcall		225
+#ifndef __powerpc64__
+#define __NR_sendfile64		226
+#endif
+#define __NR_io_setup		227
+#define __NR_io_destroy		228
+#define __NR_io_getevents	229
+#define __NR_io_submit		230
+#define __NR_io_cancel		231
+#define __NR_set_tid_address	232
+#define __NR_fadvise64		233
+#define __NR_exit_group		234
+#define __NR_lookup_dcookie	235
+#define __NR_epoll_create	236
+#define __NR_epoll_ctl		237
+#define __NR_epoll_wait		238
+#define __NR_remap_file_pages	239
+#define __NR_timer_create	240
+#define __NR_timer_settime	241
+#define __NR_timer_gettime	242
+#define __NR_timer_getoverrun	243
+#define __NR_timer_delete	244
+#define __NR_clock_settime	245
+#define __NR_clock_gettime	246
+#define __NR_clock_getres	247
+#define __NR_clock_nanosleep	248
+#define __NR_swapcontext	249
+#define __NR_tgkill		250
+#define __NR_utimes		251
+#define __NR_statfs64		252
+#define __NR_fstatfs64		253
+#ifndef __powerpc64__
+#define __NR_fadvise64_64	254
+#endif
+#define __NR_rtas		255
+#define __NR_sys_debug_setcontext 256
+/* Number 257 is reserved for vserver */
+#define __NR_migrate_pages	258
+#define __NR_mbind		259
+#define __NR_get_mempolicy	260
+#define __NR_set_mempolicy	261
+#define __NR_mq_open		262
+#define __NR_mq_unlink		263
+#define __NR_mq_timedsend	264
+#define __NR_mq_timedreceive	265
+#define __NR_mq_notify		266
+#define __NR_mq_getsetattr	267
+#define __NR_kexec_load		268
+#define __NR_add_key		269
+#define __NR_request_key	270
+#define __NR_keyctl		271
+#define __NR_waitid		272
+#define __NR_ioprio_set		273
+#define __NR_ioprio_get		274
+#define __NR_inotify_init	275
+#define __NR_inotify_add_watch	276
+#define __NR_inotify_rm_watch	277
+#define __NR_spu_run		278
+#define __NR_spu_create		279
+#define __NR_pselect6		280
+#define __NR_ppoll		281
+#define __NR_unshare		282
+#define __NR_splice		283
+#define __NR_tee		284
+#define __NR_vmsplice		285
+#define __NR_openat		286
+#define __NR_mkdirat		287
+#define __NR_mknodat		288
+#define __NR_fchownat		289
+#define __NR_futimesat		290
+#ifdef __powerpc64__
+#define __NR_newfstatat		291
+#else
+#define __NR_fstatat64		291
+#endif
+#define __NR_unlinkat		292
+#define __NR_renameat		293
+#define __NR_linkat		294
+#define __NR_symlinkat		295
+#define __NR_readlinkat		296
+#define __NR_fchmodat		297
+#define __NR_faccessat		298
+#define __NR_get_robust_list	299
+#define __NR_set_robust_list	300
+#define __NR_move_pages		301
+#define __NR_getcpu		302
+#define __NR_epoll_pwait	303
+#define __NR_utimensat		304
+#define __NR_signalfd		305
+#define __NR_timerfd_create	306
+#define __NR_eventfd		307
+#define __NR_sync_file_range2	308
+#define __NR_fallocate		309
+#define __NR_subpage_prot	310
+#define __NR_timerfd_settime	311
+#define __NR_timerfd_gettime	312
+#define __NR_signalfd4		313
+#define __NR_eventfd2		314
+#define __NR_epoll_create1	315
+#define __NR_dup3		316
+#define __NR_pipe2		317
+#define __NR_inotify_init1	318
+
+#ifdef __KERNEL__
+
+#define __NR_syscalls		319
+
+#define __NR__exit __NR_exit
+#define NR_syscalls	__NR_syscalls
+
+#ifndef __ASSEMBLY__
+
+#include <linux/types.h>
+#include <linux/compiler.h>
+#include <linux/linkage.h>
+
+#define __ARCH_WANT_IPC_PARSE_VERSION
+#define __ARCH_WANT_OLD_READDIR
+#define __ARCH_WANT_STAT64
+#define __ARCH_WANT_SYS_ALARM
+#define __ARCH_WANT_SYS_GETHOSTNAME
+#define __ARCH_WANT_SYS_PAUSE
+#define __ARCH_WANT_SYS_SGETMASK
+#define __ARCH_WANT_SYS_SIGNAL
+#define __ARCH_WANT_SYS_TIME
+#define __ARCH_WANT_SYS_UTIME
+#define __ARCH_WANT_SYS_WAITPID
+#define __ARCH_WANT_SYS_SOCKETCALL
+#define __ARCH_WANT_SYS_FADVISE64
+#define __ARCH_WANT_SYS_GETPGRP
+#define __ARCH_WANT_SYS_LLSEEK
+#define __ARCH_WANT_SYS_NICE
+#define __ARCH_WANT_SYS_OLD_GETRLIMIT
+#define __ARCH_WANT_SYS_OLDUMOUNT
+#define __ARCH_WANT_SYS_SIGPENDING
+#define __ARCH_WANT_SYS_SIGPROCMASK
+#define __ARCH_WANT_SYS_RT_SIGACTION
+#define __ARCH_WANT_SYS_RT_SIGSUSPEND
+#ifdef CONFIG_PPC32
+#define __ARCH_WANT_OLD_STAT
+#endif
+#ifdef CONFIG_PPC64
+#define __ARCH_WANT_COMPAT_SYS_TIME
+#define __ARCH_WANT_COMPAT_SYS_RT_SIGSUSPEND
+#define __ARCH_WANT_SYS_NEWFSTATAT
+#endif
+
+/*
+ * "Conditional" syscalls
+ */
+#define cond_syscall(x) \
+	asmlinkage long x (void) __attribute__((weak,alias("sys_ni_syscall")))
+
+#endif		/* __ASSEMBLY__ */
+#endif		/* __KERNEL__ */
+
+#endif /* _ASM_POWERPC_UNISTD_H_ */
diff --git a/include/asm-powerpc/user.h b/arch/powerpc/include/asm/user.h
index 3fd4545dd74e..3fd4545dd74e 100644
--- a/include/asm-powerpc/user.h
+++ b/arch/powerpc/include/asm/user.h
diff --git a/include/asm-powerpc/vdso.h b/arch/powerpc/include/asm/vdso.h
index 26fc449bd989..26fc449bd989 100644
--- a/include/asm-powerpc/vdso.h
+++ b/arch/powerpc/include/asm/vdso.h
diff --git a/include/asm-powerpc/vdso_datapage.h b/arch/powerpc/include/asm/vdso_datapage.h
index f01393224b52..f01393224b52 100644
--- a/include/asm-powerpc/vdso_datapage.h
+++ b/arch/powerpc/include/asm/vdso_datapage.h
diff --git a/include/asm-powerpc/vga.h b/arch/powerpc/include/asm/vga.h
index a2eac409c1ec..a2eac409c1ec 100644
--- a/include/asm-powerpc/vga.h
+++ b/arch/powerpc/include/asm/vga.h
diff --git a/arch/powerpc/include/asm/vio.h b/arch/powerpc/include/asm/vio.h
new file mode 100644
index 000000000000..0a290a195946
--- /dev/null
+++ b/arch/powerpc/include/asm/vio.h
@@ -0,0 +1,118 @@
+/*
+ * IBM PowerPC Virtual I/O Infrastructure Support.
+ *
+ * Copyright (c) 2003 IBM Corp.
+ *  Dave Engebretsen engebret@us.ibm.com
+ *  Santiago Leon santil@us.ibm.com
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#ifndef _ASM_POWERPC_VIO_H
+#define _ASM_POWERPC_VIO_H
+#ifdef __KERNEL__
+
+#include <linux/init.h>
+#include <linux/errno.h>
+#include <linux/device.h>
+#include <linux/dma-mapping.h>
+#include <linux/mod_devicetable.h>
+
+#include <asm/hvcall.h>
+#include <asm/scatterlist.h>
+
+/*
+ * Architecture-specific constants for drivers to
+ * extract attributes of the device using vio_get_attribute()
+ */
+#define VETH_MAC_ADDR "local-mac-address"
+#define VETH_MCAST_FILTER_SIZE "ibm,mac-address-filters"
+
+/* End architecture-specific constants */
+
+#define h_vio_signal(ua, mode) \
+  plpar_hcall_norets(H_VIO_SIGNAL, ua, mode)
+
+#define VIO_IRQ_DISABLE		0UL
+#define VIO_IRQ_ENABLE		1UL
+
+/*
+ * VIO CMO minimum entitlement for all devices and spare entitlement
+ */
+#define VIO_CMO_MIN_ENT 1562624
+
+struct iommu_table;
+
+/**
+ * vio_dev - This structure is used to describe virtual I/O devices.
+ *
+ * @desired: set from return of driver's get_desired_dma() function
+ * @entitled: bytes of IO data that has been reserved for this device.
+ * @allocated: bytes of IO data currently in use by the device.
+ * @allocs_failed: number of DMA failures due to insufficient entitlement.
+ */
+struct vio_dev {
+	const char *name;
+	const char *type;
+	uint32_t unit_address;
+	unsigned int irq;
+	struct {
+		size_t desired;
+		size_t entitled;
+		size_t allocated;
+		atomic_t allocs_failed;
+	} cmo;
+	struct device dev;
+};
+
+struct vio_driver {
+	const struct vio_device_id *id_table;
+	int (*probe)(struct vio_dev *dev, const struct vio_device_id *id);
+	int (*remove)(struct vio_dev *dev);
+	/* A driver must have a get_desired_dma() function to
+	 * be loaded in a CMO environment if it uses DMA.
+	 */
+	unsigned long (*get_desired_dma)(struct vio_dev *dev);
+	struct device_driver driver;
+};
+
+extern int vio_register_driver(struct vio_driver *drv);
+extern void vio_unregister_driver(struct vio_driver *drv);
+
+extern int vio_cmo_entitlement_update(size_t);
+extern void vio_cmo_set_dev_desired(struct vio_dev *viodev, size_t desired);
+
+extern void __devinit vio_unregister_device(struct vio_dev *dev);
+
+struct device_node;
+
+extern struct vio_dev *vio_register_device_node(
+		struct device_node *node_vdev);
+extern const void *vio_get_attribute(struct vio_dev *vdev, char *which,
+		int *length);
+#ifdef CONFIG_PPC_PSERIES
+extern struct vio_dev *vio_find_node(struct device_node *vnode);
+extern int vio_enable_interrupts(struct vio_dev *dev);
+extern int vio_disable_interrupts(struct vio_dev *dev);
+#else
+static inline int vio_enable_interrupts(struct vio_dev *dev)
+{
+	return 0;
+}
+#endif
+
+static inline struct vio_driver *to_vio_driver(struct device_driver *drv)
+{
+	return container_of(drv, struct vio_driver, driver);
+}
+
+static inline struct vio_dev *to_vio_dev(struct device *dev)
+{
+	return container_of(dev, struct vio_dev, dev);
+}
+
+#endif /* __KERNEL__ */
+#endif /* _ASM_POWERPC_VIO_H */
diff --git a/include/asm-powerpc/xilinx_intc.h b/arch/powerpc/include/asm/xilinx_intc.h
index 343612f8fece..343612f8fece 100644
--- a/include/asm-powerpc/xilinx_intc.h
+++ b/arch/powerpc/include/asm/xilinx_intc.h
diff --git a/include/asm-powerpc/xmon.h b/arch/powerpc/include/asm/xmon.h
index 5eb8e599e5cc..5eb8e599e5cc 100644
--- a/include/asm-powerpc/xmon.h
+++ b/arch/powerpc/include/asm/xmon.h
diff --git a/include/asm-powerpc/xor.h b/arch/powerpc/include/asm/xor.h
index c82eb12a5b18..c82eb12a5b18 100644
--- a/include/asm-powerpc/xor.h
+++ b/arch/powerpc/include/asm/xor.h
diff --git a/arch/powerpc/kernel/Makefile b/arch/powerpc/kernel/Makefile
index 1a4094704b1f..946daea780f1 100644
--- a/arch/powerpc/kernel/Makefile
+++ b/arch/powerpc/kernel/Makefile
@@ -14,12 +14,13 @@ endif
 
 ifdef CONFIG_FTRACE
 # Do not trace early boot code
-CFLAGS_REMOVE_cputable.o = -pg
-CFLAGS_REMOVE_prom_init.o = -pg
+CFLAGS_REMOVE_cputable.o = -pg -mno-sched-epilog
+CFLAGS_REMOVE_prom_init.o = -pg -mno-sched-epilog
+CFLAGS_REMOVE_btext.o = -pg -mno-sched-epilog
 
 ifdef CONFIG_DYNAMIC_FTRACE
 # dynamic ftrace setup.
-CFLAGS_REMOVE_ftrace.o = -pg
+CFLAGS_REMOVE_ftrace.o = -pg -mno-sched-epilog
 endif
 
 endif
@@ -59,8 +60,6 @@ obj64-$(CONFIG_HIBERNATION)	+= swsusp_asm64.o
 obj-$(CONFIG_MODULES)		+= module.o module_$(CONFIG_WORD_SIZE).o
 obj-$(CONFIG_44x)		+= cpu_setup_44x.o
 
-ifeq ($(CONFIG_PPC_MERGE),y)
-
 extra-$(CONFIG_PPC_STD_MMU)	:= head_32.o
 extra-$(CONFIG_PPC64)		:= head_64.o
 extra-$(CONFIG_40x)		:= head_40x.o
@@ -100,12 +99,6 @@ ifneq ($(CONFIG_PPC_INDIRECT_IO),y)
 obj-y				+= iomap.o
 endif
 
-else
-# stuff used from here for ARCH=ppc
-smpobj-$(CONFIG_SMP)		+= smp.o
-
-endif
-
 obj-$(CONFIG_PPC64)		+= $(obj64-y)
 
 extra-$(CONFIG_PPC_FPU)		+= fpu.o
@@ -121,9 +114,6 @@ PHONY += systbl_chk
 systbl_chk: $(src)/systbl_chk.sh $(obj)/systbl_chk.i
 	$(call cmd,systbl_chk)
 
-
-ifeq ($(CONFIG_PPC_MERGE),y)
-
 $(obj)/built-in.o:		prom_init_check
 
 quiet_cmd_prom_init_check = CALL    $<
@@ -133,7 +123,4 @@ PHONY += prom_init_check
 prom_init_check: $(src)/prom_init_check.sh $(obj)/prom_init.o
 	$(call cmd,prom_init_check)
 
-endif
-
-
 clean-files := vmlinux.lds
diff --git a/arch/powerpc/kernel/align.c b/arch/powerpc/kernel/align.c
index 367129789cc0..5af4e9b2dbe2 100644
--- a/arch/powerpc/kernel/align.c
+++ b/arch/powerpc/kernel/align.c
@@ -647,7 +647,7 @@ static int emulate_vsx(unsigned char __user *addr, unsigned int reg,
 		       unsigned int flags, unsigned int length)
 {
 	char *ptr = (char *) &current->thread.TS_FPR(reg);
-	int ret;
+	int ret = 0;
 
 	flush_vsx_to_thread(current);
 
diff --git a/arch/powerpc/kernel/cpu_setup_44x.S b/arch/powerpc/kernel/cpu_setup_44x.S
index 5465e8de0e61..80cac984d85d 100644
--- a/arch/powerpc/kernel/cpu_setup_44x.S
+++ b/arch/powerpc/kernel/cpu_setup_44x.S
@@ -39,12 +39,6 @@ _GLOBAL(__setup_cpu_440gx)
 _GLOBAL(__setup_cpu_440spe)
 	b	__fixup_440A_mcheck
 
- /* Temporary fixup for arch/ppc until we kill the whole thing */
-#ifndef CONFIG_PPC_MERGE
-_GLOBAL(__fixup_440A_mcheck)
-	blr
-#endif
-
 /* enable APU between CPU and FPU */
 _GLOBAL(__init_fpu_44x)
 	mfspr	r3,SPRN_CCR0
diff --git a/arch/powerpc/kernel/cputable.c b/arch/powerpc/kernel/cputable.c
index b936a1dd0a50..25c273c761d1 100644
--- a/arch/powerpc/kernel/cputable.c
+++ b/arch/powerpc/kernel/cputable.c
@@ -23,6 +23,9 @@
 struct cpu_spec* cur_cpu_spec = NULL;
 EXPORT_SYMBOL(cur_cpu_spec);
 
+/* The platform string corresponding to the real PVR */
+const char *powerpc_base_platform;
+
 /* NOTE:
  * Unlike ppc32, ppc64 will only call this once for the boot CPU, it's
  * the responsibility of the appropriate CPU save/restore functions to
@@ -1652,6 +1655,14 @@ struct cpu_spec * __init identify_cpu(unsigned long offset, unsigned int pvr)
 			} else
 				*t = *s;
 			*PTRRELOC(&cur_cpu_spec) = &the_cpu_spec;
+
+			/*
+			 * Set the base platform string once; assumes
+			 * we're called with real pvr first.
+			 */
+			if (*PTRRELOC(&powerpc_base_platform) == NULL)
+				*PTRRELOC(&powerpc_base_platform) = t->platform;
+
 #if defined(CONFIG_PPC64) || defined(CONFIG_BOOKE)
 			/* ppc64 and booke expect identify_cpu to also call
 			 * setup_cpu for that processor. I will consolidate
diff --git a/arch/powerpc/kernel/crash_dump.c b/arch/powerpc/kernel/crash_dump.c
index e0debcca0bfa..a323c9b32ee1 100644
--- a/arch/powerpc/kernel/crash_dump.c
+++ b/arch/powerpc/kernel/crash_dump.c
@@ -86,6 +86,19 @@ static int __init parse_savemaxmem(char *p)
 }
 __setup("savemaxmem=", parse_savemaxmem);
 
+
+static size_t copy_oldmem_vaddr(void *vaddr, char *buf, size_t csize,
+                               unsigned long offset, int userbuf)
+{
+	if (userbuf) {
+		if (copy_to_user((char __user *)buf, (vaddr + offset), csize))
+			return -EFAULT;
+	} else
+		memcpy(buf, (vaddr + offset), csize);
+
+	return csize;
+}
+
 /**
  * copy_oldmem_page - copy one page from "oldmem"
  * @pfn: page frame number to be copied
@@ -107,16 +120,16 @@ ssize_t copy_oldmem_page(unsigned long pfn, char *buf,
 	if (!csize)
 		return 0;
 
-	vaddr = __ioremap(pfn << PAGE_SHIFT, PAGE_SIZE, 0);
+	csize = min(csize, PAGE_SIZE);
 
-	if (userbuf) {
-		if (copy_to_user((char __user *)buf, (vaddr + offset), csize)) {
-			iounmap(vaddr);
-			return -EFAULT;
-		}
-	} else
-		memcpy(buf, (vaddr + offset), csize);
+	if (pfn < max_pfn) {
+		vaddr = __va(pfn << PAGE_SHIFT);
+		csize = copy_oldmem_vaddr(vaddr, buf, csize, offset, userbuf);
+	} else {
+		vaddr = __ioremap(pfn << PAGE_SHIFT, PAGE_SIZE, 0);
+		csize = copy_oldmem_vaddr(vaddr, buf, csize, offset, userbuf);
+		iounmap(vaddr);
+	}
 
-	iounmap(vaddr);
 	return csize;
 }
diff --git a/arch/powerpc/kernel/entry_32.S b/arch/powerpc/kernel/entry_32.S
index da52269aec1e..1cbbf7033641 100644
--- a/arch/powerpc/kernel/entry_32.S
+++ b/arch/powerpc/kernel/entry_32.S
@@ -343,7 +343,12 @@ syscall_dotrace:
 	stw	r0,_TRAP(r1)
 	addi	r3,r1,STACK_FRAME_OVERHEAD
 	bl	do_syscall_trace_enter
-	lwz	r0,GPR0(r1)	/* Restore original registers */
+	/*
+	 * Restore argument registers possibly just changed.
+	 * We use the return value of do_syscall_trace_enter
+	 * for call number to look up in the table (r0).
+	 */
+	mr	r0,r3
 	lwz	r3,GPR3(r1)
 	lwz	r4,GPR4(r1)
 	lwz	r5,GPR5(r1)
@@ -1055,8 +1060,8 @@ do_user_signal:			/* r10 contains MSR_KERNEL here */
 	SAVE_NVGPRS(r1)
 	rlwinm	r3,r3,0,0,30
 	stw	r3,_TRAP(r1)
-2:	li	r3,0
-	addi	r4,r1,STACK_FRAME_OVERHEAD
+2:	addi	r3,r1,STACK_FRAME_OVERHEAD
+	mr	r4,r9
 	bl	do_signal
 	REST_NVGPRS(r1)
 	b	recheck
diff --git a/arch/powerpc/kernel/entry_64.S b/arch/powerpc/kernel/entry_64.S
index d7369243ae44..2d802e97097c 100644
--- a/arch/powerpc/kernel/entry_64.S
+++ b/arch/powerpc/kernel/entry_64.S
@@ -214,7 +214,12 @@ syscall_dotrace:
 	bl	.save_nvgprs
 	addi	r3,r1,STACK_FRAME_OVERHEAD
 	bl	.do_syscall_trace_enter
-	ld	r0,GPR0(r1)	/* Restore original registers */
+	/*
+	 * Restore argument registers possibly just changed.
+	 * We use the return value of do_syscall_trace_enter
+	 * for the call number to look up in the table (r0).
+	 */
+	mr	r0,r3
 	ld	r3,GPR3(r1)
 	ld	r4,GPR4(r1)
 	ld	r5,GPR5(r1)
@@ -638,8 +643,7 @@ user_work:
 	b	.ret_from_except_lite
 
 1:	bl	.save_nvgprs
-	li	r3,0
-	addi	r4,r1,STACK_FRAME_OVERHEAD
+	addi	r3,r1,STACK_FRAME_OVERHEAD
 	bl	.do_signal
 	b	.ret_from_except
 
diff --git a/arch/powerpc/kernel/head_32.S b/arch/powerpc/kernel/head_32.S
index 99ee2f0f0f2b..8bb657519299 100644
--- a/arch/powerpc/kernel/head_32.S
+++ b/arch/powerpc/kernel/head_32.S
@@ -1155,7 +1155,7 @@ flush_tlbs:
 	lis	r10, 0x40
 1:	addic.	r10, r10, -0x1000
 	tlbie	r10
-	blt	1b
+	bgt	1b
 	sync
 	blr
 
diff --git a/arch/powerpc/kernel/ibmebus.c b/arch/powerpc/kernel/ibmebus.c
index 9d42eb57aea3..a06362223f8d 100644
--- a/arch/powerpc/kernel/ibmebus.c
+++ b/arch/powerpc/kernel/ibmebus.c
@@ -233,17 +233,6 @@ void ibmebus_free_irq(u32 ist, void *dev_id)
 }
 EXPORT_SYMBOL(ibmebus_free_irq);
 
-static ssize_t name_show(struct device *dev,
-			 struct device_attribute *attr, char *buf)
-{
-	return sprintf(buf, "%s\n", to_of_device(dev)->node->name);
-}
-
-static struct device_attribute ibmebus_dev_attrs[] = {
-	__ATTR_RO(name),
-	__ATTR_NULL
-};
-
 static char *ibmebus_chomp(const char *in, size_t count)
 {
 	char *out = kmalloc(count + 1, GFP_KERNEL);
@@ -327,7 +316,6 @@ static struct bus_attribute ibmebus_bus_attrs[] = {
 
 struct bus_type ibmebus_bus_type = {
 	.uevent    = of_device_uevent,
-	.dev_attrs = ibmebus_dev_attrs,
 	.bus_attrs = ibmebus_bus_attrs
 };
 EXPORT_SYMBOL(ibmebus_bus_type);
diff --git a/arch/powerpc/kernel/idle_6xx.S b/arch/powerpc/kernel/idle_6xx.S
index 019b02d8844f..15c611de1ee2 100644
--- a/arch/powerpc/kernel/idle_6xx.S
+++ b/arch/powerpc/kernel/idle_6xx.S
@@ -158,7 +158,7 @@ _GLOBAL(power_save_ppc32_restore)
 	stw	r9,_NIP(r11)		/* make it do a blr */
 
 #ifdef CONFIG_SMP
-	mfspr	r12,SPRN_SPRG3
+	rlwinm	r12,r11,0,0,31-THREAD_SHIFT
 	lwz	r11,TI_CPU(r12)		/* get cpu number * 4 */
 	slwi	r11,r11,2
 #else
diff --git a/arch/powerpc/kernel/idle_e500.S b/arch/powerpc/kernel/idle_e500.S
index 06304034b393..47a1a983ff88 100644
--- a/arch/powerpc/kernel/idle_e500.S
+++ b/arch/powerpc/kernel/idle_e500.S
@@ -84,10 +84,11 @@ _GLOBAL(power_save_ppc32_restore)
 	stw	r9,_NIP(r11)		/* make it do a blr */
 
 #ifdef CONFIG_SMP
-	mfspr	r12,SPRN_SPRG3
+	rlwinm	r12,r1,0,0,31-THREAD_SHIFT
 	lwz	r11,TI_CPU(r12)		/* get cpu number * 4 */
 	slwi	r11,r11,2
 #else
 	li	r11,0
 #endif
+
 	b	transfer_to_handler_cont
diff --git a/arch/powerpc/kernel/iommu.c b/arch/powerpc/kernel/iommu.c
index 2385f68c1751..550a19399bfa 100644
--- a/arch/powerpc/kernel/iommu.c
+++ b/arch/powerpc/kernel/iommu.c
@@ -49,6 +49,8 @@ static int novmerge = 1;
 
 static int protect4gb = 1;
 
+static void __iommu_free(struct iommu_table *, dma_addr_t, unsigned int);
+
 static inline unsigned long iommu_num_pages(unsigned long vaddr,
 					    unsigned long slen)
 {
@@ -191,6 +193,7 @@ static dma_addr_t iommu_alloc(struct device *dev, struct iommu_table *tbl,
 {
 	unsigned long entry, flags;
 	dma_addr_t ret = DMA_ERROR_CODE;
+	int build_fail;
 
 	spin_lock_irqsave(&(tbl->it_lock), flags);
 
@@ -205,9 +208,21 @@ static dma_addr_t iommu_alloc(struct device *dev, struct iommu_table *tbl,
 	ret = entry << IOMMU_PAGE_SHIFT;	/* Set the return dma address */
 
 	/* Put the TCEs in the HW table */
-	ppc_md.tce_build(tbl, entry, npages, (unsigned long)page & IOMMU_PAGE_MASK,
-			 direction, attrs);
+	build_fail = ppc_md.tce_build(tbl, entry, npages,
+	                              (unsigned long)page & IOMMU_PAGE_MASK,
+	                              direction, attrs);
+
+	/* ppc_md.tce_build() only returns non-zero for transient errors.
+	 * Clean up the table bitmap in this case and return
+	 * DMA_ERROR_CODE. For all other errors the functionality is
+	 * not altered.
+	 */
+	if (unlikely(build_fail)) {
+		__iommu_free(tbl, ret, npages);
 
+		spin_unlock_irqrestore(&(tbl->it_lock), flags);
+		return DMA_ERROR_CODE;
+	}
 
 	/* Flush/invalidate TLB caches if necessary */
 	if (ppc_md.tce_flush)
@@ -276,7 +291,7 @@ int iommu_map_sg(struct device *dev, struct iommu_table *tbl,
 	dma_addr_t dma_next = 0, dma_addr;
 	unsigned long flags;
 	struct scatterlist *s, *outs, *segstart;
-	int outcount, incount, i;
+	int outcount, incount, i, build_fail = 0;
 	unsigned int align;
 	unsigned long handle;
 	unsigned int max_seg_size;
@@ -337,8 +352,11 @@ int iommu_map_sg(struct device *dev, struct iommu_table *tbl,
 			    npages, entry, dma_addr);
 
 		/* Insert into HW table */
-		ppc_md.tce_build(tbl, entry, npages, vaddr & IOMMU_PAGE_MASK,
-				 direction, attrs);
+		build_fail = ppc_md.tce_build(tbl, entry, npages,
+		                              vaddr & IOMMU_PAGE_MASK,
+		                              direction, attrs);
+		if(unlikely(build_fail))
+			goto failure;
 
 		/* If we are in an open segment, try merging */
 		if (segstart != s) {
diff --git a/arch/powerpc/kernel/irq.c b/arch/powerpc/kernel/irq.c
index 6ac8612da3c3..d972decf0324 100644
--- a/arch/powerpc/kernel/irq.c
+++ b/arch/powerpc/kernel/irq.c
@@ -77,22 +77,12 @@ static int ppc_spurious_interrupts;
 EXPORT_SYMBOL(__irq_offset_value);
 atomic_t ppc_n_lost_interrupts;
 
-#ifndef CONFIG_PPC_MERGE
-#define NR_MASK_WORDS	((NR_IRQS + 31) / 32)
-unsigned long ppc_cached_irq_mask[NR_MASK_WORDS];
-#endif
-
 #ifdef CONFIG_TAU_INT
 extern int tau_initialized;
 extern int tau_interrupts(int);
 #endif
 #endif /* CONFIG_PPC32 */
 
-#if defined(CONFIG_SMP) && !defined(CONFIG_PPC_MERGE)
-extern atomic_t ipi_recv;
-extern atomic_t ipi_sent;
-#endif
-
 #ifdef CONFIG_PPC64
 EXPORT_SYMBOL(irq_desc);
 
@@ -216,21 +206,14 @@ int show_interrupts(struct seq_file *p, void *v)
 skip:
 		spin_unlock_irqrestore(&desc->lock, flags);
 	} else if (i == NR_IRQS) {
-#ifdef CONFIG_PPC32
-#ifdef CONFIG_TAU_INT
+#if defined(CONFIG_PPC32) && defined(CONFIG_TAU_INT)
 		if (tau_initialized){
 			seq_puts(p, "TAU: ");
 			for_each_online_cpu(j)
 				seq_printf(p, "%10u ", tau_interrupts(j));
 			seq_puts(p, "  PowerPC             Thermal Assist (cpu temp)\n");
 		}
-#endif
-#if defined(CONFIG_SMP) && !defined(CONFIG_PPC_MERGE)
-		/* should this be per processor send/receive? */
-		seq_printf(p, "IPI (recv/sent): %10u/%u\n",
-				atomic_read(&ipi_recv), atomic_read(&ipi_sent));
-#endif
-#endif /* CONFIG_PPC32 */
+#endif /* CONFIG_PPC32 && CONFIG_TAU_INT*/
 		seq_printf(p, "BAD: %10u\n", ppc_spurious_interrupts);
 	}
 	return 0;
@@ -454,8 +437,6 @@ void do_softirq(void)
  * IRQ controller and virtual interrupts
  */
 
-#ifdef CONFIG_PPC_MERGE
-
 static LIST_HEAD(irq_hosts);
 static DEFINE_SPINLOCK(irq_big_lock);
 static DEFINE_PER_CPU(unsigned int, irq_radix_reader);
@@ -1114,8 +1095,6 @@ static int __init irq_debugfs_init(void)
 __initcall(irq_debugfs_init);
 #endif /* CONFIG_VIRQ_DEBUG */
 
-#endif /* CONFIG_PPC_MERGE */
-
 #ifdef CONFIG_PPC64
 static int __init setup_noirqdistrib(char *str)
 {
diff --git a/arch/powerpc/kernel/kprobes.c b/arch/powerpc/kernel/kprobes.c
index 4ba2af125450..de79915452c8 100644
--- a/arch/powerpc/kernel/kprobes.c
+++ b/arch/powerpc/kernel/kprobes.c
@@ -144,7 +144,6 @@ static void __kprobes set_current_kprobe(struct kprobe *p, struct pt_regs *regs,
 	kcb->kprobe_saved_msr = regs->msr;
 }
 
-/* Called with kretprobe_lock held */
 void __kprobes arch_prepare_kretprobe(struct kretprobe_instance *ri,
 				      struct pt_regs *regs)
 {
@@ -312,8 +311,7 @@ static int __kprobes trampoline_probe_handler(struct kprobe *p,
 	unsigned long trampoline_address =(unsigned long)&kretprobe_trampoline;
 
 	INIT_HLIST_HEAD(&empty_rp);
-	spin_lock_irqsave(&kretprobe_lock, flags);
-	head = kretprobe_inst_table_head(current);
+	kretprobe_hash_lock(current, &head, &flags);
 
 	/*
 	 * It is possible to have multiple instances associated with a given
@@ -352,7 +350,7 @@ static int __kprobes trampoline_probe_handler(struct kprobe *p,
 	regs->nip = orig_ret_address;
 
 	reset_current_kprobe();
-	spin_unlock_irqrestore(&kretprobe_lock, flags);
+	kretprobe_hash_unlock(current, &flags);
 	preempt_enable_no_resched();
 
 	hlist_for_each_entry_safe(ri, node, tmp, &empty_rp, hlist) {
diff --git a/arch/powerpc/kernel/legacy_serial.c b/arch/powerpc/kernel/legacy_serial.c
index 4d96e1db55ee..9ddfaef1a184 100644
--- a/arch/powerpc/kernel/legacy_serial.c
+++ b/arch/powerpc/kernel/legacy_serial.c
@@ -493,18 +493,18 @@ static int __init serial_dev_init(void)
 device_initcall(serial_dev_init);
 
 
+#ifdef CONFIG_SERIAL_8250_CONSOLE
 /*
  * This is called very early, as part of console_init() (typically just after
  * time_init()). This function is respondible for trying to find a good
  * default console on serial ports. It tries to match the open firmware
- * default output with one of the available serial console drivers, either
- * one of the platform serial ports that have been probed earlier by
- * find_legacy_serial_ports() or some more platform specific ones.
+ * default output with one of the available serial console drivers that have
+ * been probed earlier by find_legacy_serial_ports()
  */
 static int __init check_legacy_serial_console(void)
 {
 	struct device_node *prom_stdout = NULL;
-	int speed = 0, offset = 0;
+	int i, speed = 0, offset = 0;
 	const char *name;
 	const u32 *spd;
 
@@ -548,31 +548,20 @@ static int __init check_legacy_serial_console(void)
 	if (spd)
 		speed = *spd;
 
-	if (0)
-		;
-#ifdef CONFIG_SERIAL_8250_CONSOLE
-	else if (strcmp(name, "serial") == 0) {
-		int i;
-		/* Look for it in probed array */
-		for (i = 0; i < legacy_serial_count; i++) {
-			if (prom_stdout != legacy_serial_infos[i].np)
-				continue;
-			offset = i;
-			speed = legacy_serial_infos[i].speed;
-			break;
-		}
-		if (i >= legacy_serial_count)
-			goto not_found;
+	if (strcmp(name, "serial") != 0)
+		goto not_found;
+
+	/* Look for it in probed array */
+	for (i = 0; i < legacy_serial_count; i++) {
+		if (prom_stdout != legacy_serial_infos[i].np)
+			continue;
+		offset = i;
+		speed = legacy_serial_infos[i].speed;
+		break;
 	}
-#endif /* CONFIG_SERIAL_8250_CONSOLE */
-#ifdef CONFIG_SERIAL_PMACZILOG_CONSOLE
-	else if (strcmp(name, "ch-a") == 0)
-		offset = 0;
-	else if (strcmp(name, "ch-b") == 0)
-		offset = 1;
-#endif /* CONFIG_SERIAL_PMACZILOG_CONSOLE */
-	else
+	if (i >= legacy_serial_count)
 		goto not_found;
+
 	of_node_put(prom_stdout);
 
 	DBG("Found serial console at ttyS%d\n", offset);
@@ -591,3 +580,4 @@ static int __init check_legacy_serial_console(void)
 }
 console_initcall(check_legacy_serial_console);
 
+#endif /* CONFIG_SERIAL_8250_CONSOLE */
diff --git a/arch/powerpc/kernel/lparcfg.c b/arch/powerpc/kernel/lparcfg.c
index 827a5726a035..b3eef30b5131 100644
--- a/arch/powerpc/kernel/lparcfg.c
+++ b/arch/powerpc/kernel/lparcfg.c
@@ -34,8 +34,9 @@
 #include <asm/time.h>
 #include <asm/prom.h>
 #include <asm/vdso_datapage.h>
+#include <asm/vio.h>
 
-#define MODULE_VERS "1.7"
+#define MODULE_VERS "1.8"
 #define MODULE_NAME "lparcfg"
 
 /* #define LPARCFG_DEBUG */
@@ -129,32 +130,46 @@ static int iseries_lparcfg_data(struct seq_file *m, void *v)
 /*
  * Methods used to fetch LPAR data when running on a pSeries platform.
  */
-static void log_plpar_hcall_return(unsigned long rc, char *tag)
+/**
+ * h_get_mpp
+ * H_GET_MPP hcall returns info in 7 parms
+ */
+int h_get_mpp(struct hvcall_mpp_data *mpp_data)
 {
-	switch(rc) {
-	case 0:
-		return;
-	case H_HARDWARE:
-		printk(KERN_INFO "plpar-hcall (%s) "
-				"Hardware fault\n", tag);
-		return;
-	case H_FUNCTION:
-		printk(KERN_INFO "plpar-hcall (%s) "
-				"Function not allowed\n", tag);
-		return;
-	case H_AUTHORITY:
-		printk(KERN_INFO "plpar-hcall (%s) "
-				"Not authorized to this function\n", tag);
-		return;
-	case H_PARAMETER:
-		printk(KERN_INFO "plpar-hcall (%s) "
-				"Bad parameter(s)\n",tag);
-		return;
-	default:
-		printk(KERN_INFO "plpar-hcall (%s) "
-				"Unexpected rc(0x%lx)\n", tag, rc);
-	}
+	int rc;
+	unsigned long retbuf[PLPAR_HCALL9_BUFSIZE];
+
+	rc = plpar_hcall9(H_GET_MPP, retbuf);
+
+	mpp_data->entitled_mem = retbuf[0];
+	mpp_data->mapped_mem = retbuf[1];
+
+	mpp_data->group_num = (retbuf[2] >> 2 * 8) & 0xffff;
+	mpp_data->pool_num = retbuf[2] & 0xffff;
+
+	mpp_data->mem_weight = (retbuf[3] >> 7 * 8) & 0xff;
+	mpp_data->unallocated_mem_weight = (retbuf[3] >> 6 * 8) & 0xff;
+	mpp_data->unallocated_entitlement = retbuf[3] & 0xffffffffffff;
+
+	mpp_data->pool_size = retbuf[4];
+	mpp_data->loan_request = retbuf[5];
+	mpp_data->backing_mem = retbuf[6];
+
+	return rc;
 }
+EXPORT_SYMBOL(h_get_mpp);
+
+struct hvcall_ppp_data {
+	u64	entitlement;
+	u64	unallocated_entitlement;
+	u16	group_num;
+	u16	pool_num;
+	u8	capped;
+	u8	weight;
+	u8	unallocated_weight;
+	u16	active_procs_in_pool;
+	u16	active_system_procs;
+};
 
 /*
  * H_GET_PPP hcall returns info in 4 parms.
@@ -176,27 +191,30 @@ static void log_plpar_hcall_return(unsigned long rc, char *tag)
  *              XXXX - Active processors in Physical Processor Pool.
  *                  XXXX  - Processors active on platform.
  */
-static unsigned int h_get_ppp(unsigned long *entitled,
-			      unsigned long *unallocated,
-			      unsigned long *aggregation,
-			      unsigned long *resource)
+static unsigned int h_get_ppp(struct hvcall_ppp_data *ppp_data)
 {
 	unsigned long rc;
 	unsigned long retbuf[PLPAR_HCALL_BUFSIZE];
 
 	rc = plpar_hcall(H_GET_PPP, retbuf);
 
-	*entitled = retbuf[0];
-	*unallocated = retbuf[1];
-	*aggregation = retbuf[2];
-	*resource = retbuf[3];
+	ppp_data->entitlement = retbuf[0];
+	ppp_data->unallocated_entitlement = retbuf[1];
 
-	log_plpar_hcall_return(rc, "H_GET_PPP");
+	ppp_data->group_num = (retbuf[2] >> 2 * 8) & 0xffff;
+	ppp_data->pool_num = retbuf[2] & 0xffff;
+
+	ppp_data->capped = (retbuf[3] >> 6 * 8) & 0x01;
+	ppp_data->weight = (retbuf[3] >> 5 * 8) & 0xff;
+	ppp_data->unallocated_weight = (retbuf[3] >> 4 * 8) & 0xff;
+	ppp_data->active_procs_in_pool = (retbuf[3] >> 2 * 8) & 0xffff;
+	ppp_data->active_system_procs = retbuf[3] & 0xffff;
 
 	return rc;
 }
 
-static void h_pic(unsigned long *pool_idle_time, unsigned long *num_procs)
+static unsigned h_pic(unsigned long *pool_idle_time,
+		      unsigned long *num_procs)
 {
 	unsigned long rc;
 	unsigned long retbuf[PLPAR_HCALL_BUFSIZE];
@@ -206,8 +224,87 @@ static void h_pic(unsigned long *pool_idle_time, unsigned long *num_procs)
 	*pool_idle_time = retbuf[0];
 	*num_procs = retbuf[1];
 
-	if (rc != H_AUTHORITY)
-		log_plpar_hcall_return(rc, "H_PIC");
+	return rc;
+}
+
+/*
+ * parse_ppp_data
+ * Parse out the data returned from h_get_ppp and h_pic
+ */
+static void parse_ppp_data(struct seq_file *m)
+{
+	struct hvcall_ppp_data ppp_data;
+	int rc;
+
+	rc = h_get_ppp(&ppp_data);
+	if (rc)
+		return;
+
+	seq_printf(m, "partition_entitled_capacity=%ld\n",
+	           ppp_data.entitlement);
+	seq_printf(m, "group=%d\n", ppp_data.group_num);
+	seq_printf(m, "system_active_processors=%d\n",
+	           ppp_data.active_system_procs);
+
+	/* pool related entries are apropriate for shared configs */
+	if (lppaca[0].shared_proc) {
+		unsigned long pool_idle_time, pool_procs;
+
+		seq_printf(m, "pool=%d\n", ppp_data.pool_num);
+
+		/* report pool_capacity in percentage */
+		seq_printf(m, "pool_capacity=%d\n",
+			   ppp_data.active_procs_in_pool * 100);
+
+		h_pic(&pool_idle_time, &pool_procs);
+		seq_printf(m, "pool_idle_time=%ld\n", pool_idle_time);
+		seq_printf(m, "pool_num_procs=%ld\n", pool_procs);
+	}
+
+	seq_printf(m, "unallocated_capacity_weight=%d\n",
+		   ppp_data.unallocated_weight);
+	seq_printf(m, "capacity_weight=%d\n", ppp_data.weight);
+	seq_printf(m, "capped=%d\n", ppp_data.capped);
+	seq_printf(m, "unallocated_capacity=%ld\n",
+		   ppp_data.unallocated_entitlement);
+}
+
+/**
+ * parse_mpp_data
+ * Parse out data returned from h_get_mpp
+ */
+static void parse_mpp_data(struct seq_file *m)
+{
+	struct hvcall_mpp_data mpp_data;
+	int rc;
+
+	rc = h_get_mpp(&mpp_data);
+	if (rc)
+		return;
+
+	seq_printf(m, "entitled_memory=%ld\n", mpp_data.entitled_mem);
+
+	if (mpp_data.mapped_mem != -1)
+		seq_printf(m, "mapped_entitled_memory=%ld\n",
+		           mpp_data.mapped_mem);
+
+	seq_printf(m, "entitled_memory_group_number=%d\n", mpp_data.group_num);
+	seq_printf(m, "entitled_memory_pool_number=%d\n", mpp_data.pool_num);
+
+	seq_printf(m, "entitled_memory_weight=%d\n", mpp_data.mem_weight);
+	seq_printf(m, "unallocated_entitled_memory_weight=%d\n",
+	           mpp_data.unallocated_mem_weight);
+	seq_printf(m, "unallocated_io_mapping_entitlement=%ld\n",
+	           mpp_data.unallocated_entitlement);
+
+	if (mpp_data.pool_size != -1)
+		seq_printf(m, "entitled_memory_pool_size=%ld bytes\n",
+		           mpp_data.pool_size);
+
+	seq_printf(m, "entitled_memory_loan_request=%ld\n",
+	           mpp_data.loan_request);
+
+	seq_printf(m, "backing_memory=%ld bytes\n", mpp_data.backing_mem);
 }
 
 #define SPLPAR_CHARACTERISTICS_TOKEN 20
@@ -313,6 +410,30 @@ static int lparcfg_count_active_processors(void)
 	return count;
 }
 
+static void pseries_cmo_data(struct seq_file *m)
+{
+	int cpu;
+	unsigned long cmo_faults = 0;
+	unsigned long cmo_fault_time = 0;
+
+	seq_printf(m, "cmo_enabled=%d\n", firmware_has_feature(FW_FEATURE_CMO));
+
+	if (!firmware_has_feature(FW_FEATURE_CMO))
+		return;
+
+	for_each_possible_cpu(cpu) {
+		cmo_faults += lppaca[cpu].cmo_faults;
+		cmo_fault_time += lppaca[cpu].cmo_fault_time;
+	}
+
+	seq_printf(m, "cmo_faults=%lu\n", cmo_faults);
+	seq_printf(m, "cmo_fault_time_usec=%lu\n",
+		   cmo_fault_time / tb_ticks_per_usec);
+	seq_printf(m, "cmo_primary_psp=%d\n", cmo_get_primary_psp());
+	seq_printf(m, "cmo_secondary_psp=%d\n", cmo_get_secondary_psp());
+	seq_printf(m, "cmo_page_size=%lu\n", cmo_get_page_size());
+}
+
 static int pseries_lparcfg_data(struct seq_file *m, void *v)
 {
 	int partition_potential_processors;
@@ -334,60 +455,13 @@ static int pseries_lparcfg_data(struct seq_file *m, void *v)
 	partition_active_processors = lparcfg_count_active_processors();
 
 	if (firmware_has_feature(FW_FEATURE_SPLPAR)) {
-		unsigned long h_entitled, h_unallocated;
-		unsigned long h_aggregation, h_resource;
-		unsigned long pool_idle_time, pool_procs;
-		unsigned long purr;
-
-		h_get_ppp(&h_entitled, &h_unallocated, &h_aggregation,
-			  &h_resource);
-
-		seq_printf(m, "R4=0x%lx\n", h_entitled);
-		seq_printf(m, "R5=0x%lx\n", h_unallocated);
-		seq_printf(m, "R6=0x%lx\n", h_aggregation);
-		seq_printf(m, "R7=0x%lx\n", h_resource);
-
-		purr = get_purr();
-
 		/* this call handles the ibm,get-system-parameter contents */
 		parse_system_parameter_string(m);
+		parse_ppp_data(m);
+		parse_mpp_data(m);
+		pseries_cmo_data(m);
 
-		seq_printf(m, "partition_entitled_capacity=%ld\n", h_entitled);
-
-		seq_printf(m, "group=%ld\n", (h_aggregation >> 2 * 8) & 0xffff);
-
-		seq_printf(m, "system_active_processors=%ld\n",
-			   (h_resource >> 0 * 8) & 0xffff);
-
-		/* pool related entries are apropriate for shared configs */
-		if (lppaca[0].shared_proc) {
-
-			h_pic(&pool_idle_time, &pool_procs);
-
-			seq_printf(m, "pool=%ld\n",
-				   (h_aggregation >> 0 * 8) & 0xffff);
-
-			/* report pool_capacity in percentage */
-			seq_printf(m, "pool_capacity=%ld\n",
-				   ((h_resource >> 2 * 8) & 0xffff) * 100);
-
-			seq_printf(m, "pool_idle_time=%ld\n", pool_idle_time);
-
-			seq_printf(m, "pool_num_procs=%ld\n", pool_procs);
-		}
-
-		seq_printf(m, "unallocated_capacity_weight=%ld\n",
-			   (h_resource >> 4 * 8) & 0xFF);
-
-		seq_printf(m, "capacity_weight=%ld\n",
-			   (h_resource >> 5 * 8) & 0xFF);
-
-		seq_printf(m, "capped=%ld\n", (h_resource >> 6 * 8) & 0x01);
-
-		seq_printf(m, "unallocated_capacity=%ld\n", h_unallocated);
-
-		seq_printf(m, "purr=%ld\n", purr);
-
+		seq_printf(m, "purr=%ld\n", get_purr());
 	} else {		/* non SPLPAR case */
 
 		seq_printf(m, "system_active_processors=%d\n",
@@ -414,6 +488,83 @@ static int pseries_lparcfg_data(struct seq_file *m, void *v)
 	return 0;
 }
 
+static ssize_t update_ppp(u64 *entitlement, u8 *weight)
+{
+	struct hvcall_ppp_data ppp_data;
+	u8 new_weight;
+	u64 new_entitled;
+	ssize_t retval;
+
+	/* Get our current parameters */
+	retval = h_get_ppp(&ppp_data);
+	if (retval)
+		return retval;
+
+	if (entitlement) {
+		new_weight = ppp_data.weight;
+		new_entitled = *entitlement;
+	} else if (weight) {
+		new_weight = *weight;
+		new_entitled = ppp_data.entitlement;
+	} else
+		return -EINVAL;
+
+	pr_debug("%s: current_entitled = %lu, current_weight = %u\n",
+	         __FUNCTION__, ppp_data.entitlement, ppp_data.weight);
+
+	pr_debug("%s: new_entitled = %lu, new_weight = %u\n",
+		 __FUNCTION__, new_entitled, new_weight);
+
+	retval = plpar_hcall_norets(H_SET_PPP, new_entitled, new_weight);
+	return retval;
+}
+
+/**
+ * update_mpp
+ *
+ * Update the memory entitlement and weight for the partition.  Caller must
+ * specify either a new entitlement or weight, not both, to be updated
+ * since the h_set_mpp call takes both entitlement and weight as parameters.
+ */
+static ssize_t update_mpp(u64 *entitlement, u8 *weight)
+{
+	struct hvcall_mpp_data mpp_data;
+	u64 new_entitled;
+	u8 new_weight;
+	ssize_t rc;
+
+	if (entitlement) {
+		/* Check with vio to ensure the new memory entitlement
+		 * can be handled.
+		 */
+		rc = vio_cmo_entitlement_update(*entitlement);
+		if (rc)
+			return rc;
+	}
+
+	rc = h_get_mpp(&mpp_data);
+	if (rc)
+		return rc;
+
+	if (entitlement) {
+		new_weight = mpp_data.mem_weight;
+		new_entitled = *entitlement;
+	} else if (weight) {
+		new_weight = *weight;
+		new_entitled = mpp_data.entitled_mem;
+	} else
+		return -EINVAL;
+
+	pr_debug("%s: current_entitled = %lu, current_weight = %u\n",
+	         __FUNCTION__, mpp_data.entitled_mem, mpp_data.mem_weight);
+
+	pr_debug("%s: new_entitled = %lu, new_weight = %u\n",
+	         __FUNCTION__, new_entitled, new_weight);
+
+	rc = plpar_hcall_norets(H_SET_MPP, new_entitled, new_weight);
+	return rc;
+}
+
 /*
  * Interface for changing system parameters (variable capacity weight
  * and entitled capacity).  Format of input is "param_name=value";
@@ -427,35 +578,27 @@ static int pseries_lparcfg_data(struct seq_file *m, void *v)
 static ssize_t lparcfg_write(struct file *file, const char __user * buf,
 			     size_t count, loff_t * off)
 {
-	char *kbuf;
+	int kbuf_sz = 64;
+	char kbuf[kbuf_sz];
 	char *tmp;
 	u64 new_entitled, *new_entitled_ptr = &new_entitled;
 	u8 new_weight, *new_weight_ptr = &new_weight;
-
-	unsigned long current_entitled;	/* parameters for h_get_ppp */
-	unsigned long dummy;
-	unsigned long resource;
-	u8 current_weight;
-
-	ssize_t retval = -ENOMEM;
+	ssize_t retval;
 
 	if (!firmware_has_feature(FW_FEATURE_SPLPAR) ||
 			firmware_has_feature(FW_FEATURE_ISERIES))
 		return -EINVAL;
 
-	kbuf = kmalloc(count, GFP_KERNEL);
-	if (!kbuf)
-		goto out;
+	if (count > kbuf_sz)
+		return -EINVAL;
 
-	retval = -EFAULT;
 	if (copy_from_user(kbuf, buf, count))
-		goto out;
+		return -EFAULT;
 
-	retval = -EINVAL;
 	kbuf[count - 1] = '\0';
 	tmp = strchr(kbuf, '=');
 	if (!tmp)
-		goto out;
+		return -EINVAL;
 
 	*tmp++ = '\0';
 
@@ -463,34 +606,32 @@ static ssize_t lparcfg_write(struct file *file, const char __user * buf,
 		char *endp;
 		*new_entitled_ptr = (u64) simple_strtoul(tmp, &endp, 10);
 		if (endp == tmp)
-			goto out;
-		new_weight_ptr = &current_weight;
+			return -EINVAL;
+
+		retval = update_ppp(new_entitled_ptr, NULL);
 	} else if (!strcmp(kbuf, "capacity_weight")) {
 		char *endp;
 		*new_weight_ptr = (u8) simple_strtoul(tmp, &endp, 10);
 		if (endp == tmp)
-			goto out;
-		new_entitled_ptr = &current_entitled;
-	} else
-		goto out;
-
-	/* Get our current parameters */
-	retval = h_get_ppp(&current_entitled, &dummy, &dummy, &resource);
-	if (retval) {
-		retval = -EIO;
-		goto out;
-	}
-
-	current_weight = (resource >> 5 * 8) & 0xFF;
+			return -EINVAL;
 
-	pr_debug("%s: current_entitled = %lu, current_weight = %u\n",
-		 __func__, current_entitled, current_weight);
+		retval = update_ppp(NULL, new_weight_ptr);
+	} else if (!strcmp(kbuf, "entitled_memory")) {
+		char *endp;
+		*new_entitled_ptr = (u64) simple_strtoul(tmp, &endp, 10);
+		if (endp == tmp)
+			return -EINVAL;
 
-	pr_debug("%s: new_entitled = %lu, new_weight = %u\n",
-		 __func__, *new_entitled_ptr, *new_weight_ptr);
+		retval = update_mpp(new_entitled_ptr, NULL);
+	} else if (!strcmp(kbuf, "entitled_memory_weight")) {
+		char *endp;
+		*new_weight_ptr = (u8) simple_strtoul(tmp, &endp, 10);
+		if (endp == tmp)
+			return -EINVAL;
 
-	retval = plpar_hcall_norets(H_SET_PPP, *new_entitled_ptr,
-				    *new_weight_ptr);
+		retval = update_mpp(NULL, new_weight_ptr);
+	} else
+		return -EINVAL;
 
 	if (retval == H_SUCCESS || retval == H_CONSTRAINED) {
 		retval = count;
@@ -500,14 +641,8 @@ static ssize_t lparcfg_write(struct file *file, const char __user * buf,
 		retval = -EIO;
 	} else if (retval == H_PARAMETER) {
 		retval = -EINVAL;
-	} else {
-		printk(KERN_WARNING "%s: received unknown hv return code %ld",
-		       __func__, retval);
-		retval = -EIO;
 	}
 
-out:
-	kfree(kbuf);
 	return retval;
 }
 
diff --git a/arch/powerpc/kernel/machine_kexec.c b/arch/powerpc/kernel/machine_kexec.c
index 29a0e039d436..aab76887a842 100644
--- a/arch/powerpc/kernel/machine_kexec.c
+++ b/arch/powerpc/kernel/machine_kexec.c
@@ -48,7 +48,7 @@ void machine_kexec_cleanup(struct kimage *image)
  * Do not allocate memory (or fail in any way) in machine_kexec().
  * We are past the point of no return, committed to rebooting now.
  */
-NORET_TYPE void machine_kexec(struct kimage *image)
+void machine_kexec(struct kimage *image)
 {
 	if (ppc_md.machine_kexec)
 		ppc_md.machine_kexec(image);
diff --git a/arch/powerpc/kernel/machine_kexec_32.c b/arch/powerpc/kernel/machine_kexec_32.c
index cbaa34196797..ae63a964b858 100644
--- a/arch/powerpc/kernel/machine_kexec_32.c
+++ b/arch/powerpc/kernel/machine_kexec_32.c
@@ -51,7 +51,7 @@ void default_machine_kexec(struct kimage *image)
 						relocate_new_kernel_size);
 
 	flush_icache_range(reboot_code_buffer,
-				reboot_code_buffer + KEXEC_CONTROL_CODE_SIZE);
+				reboot_code_buffer + KEXEC_CONTROL_PAGE_SIZE);
 	printk(KERN_INFO "Bye!\n");
 
 	/* now call it */
diff --git a/arch/powerpc/kernel/misc_32.S b/arch/powerpc/kernel/misc_32.S
index 6321ae36f729..7a6dfbca7682 100644
--- a/arch/powerpc/kernel/misc_32.S
+++ b/arch/powerpc/kernel/misc_32.S
@@ -899,7 +899,7 @@ relocate_new_kernel:
 
 	/* set a new stack at the bottom of our page... */
 	/* (not really needed now) */
-	addi	r1, r4, KEXEC_CONTROL_CODE_SIZE - 8 /* for LR Save+Back Chain */
+	addi	r1, r4, KEXEC_CONTROL_PAGE_SIZE - 8 /* for LR Save+Back Chain */
 	stw	r0, 0(r1)
 
 	/* Do the copies */
diff --git a/arch/powerpc/kernel/module.c b/arch/powerpc/kernel/module.c
index af07003573c4..7ff292475269 100644
--- a/arch/powerpc/kernel/module.c
+++ b/arch/powerpc/kernel/module.c
@@ -99,18 +99,3 @@ void module_arch_cleanup(struct module *mod)
 {
 	module_bug_cleanup(mod);
 }
-
-struct bug_entry *module_find_bug(unsigned long bugaddr)
-{
-	struct mod_arch_specific *mod;
-	unsigned int i;
-	struct bug_entry *bug;
-
-	list_for_each_entry(mod, &module_bug_list, bug_list) {
-		bug = mod->bug_table;
-		for (i = 0; i < mod->num_bugs; ++i, ++bug)
-			if (bugaddr == bug->bug_addr)
-				return bug;
-	}
-	return NULL;
-}
diff --git a/arch/powerpc/kernel/pci-common.c b/arch/powerpc/kernel/pci-common.c
index 224e9a11765c..ea0c61e09b76 100644
--- a/arch/powerpc/kernel/pci-common.c
+++ b/arch/powerpc/kernel/pci-common.c
@@ -650,11 +650,18 @@ void __devinit pci_process_bridge_OF_ranges(struct pci_controller *hose,
 		}
 	}
 
-	/* Out of paranoia, let's put the ISA hole last if any */
-	if (isa_hole >= 0 && memno > 0 && isa_hole != (memno-1)) {
-		struct resource tmp = hose->mem_resources[isa_hole];
-		hose->mem_resources[isa_hole] = hose->mem_resources[memno-1];
-		hose->mem_resources[memno-1] = tmp;
+	/* If there's an ISA hole and the pci_mem_offset is -not- matching
+	 * the ISA hole offset, then we need to remove the ISA hole from
+	 * the resource list for that brige
+	 */
+	if (isa_hole >= 0 && hose->pci_mem_offset != isa_mb) {
+		unsigned int next = isa_hole + 1;
+		printk(KERN_INFO " Removing ISA hole at 0x%016llx\n", isa_mb);
+		if (next < memno)
+			memmove(&hose->mem_resources[isa_hole],
+				&hose->mem_resources[next],
+				sizeof(struct resource) * (memno - next));
+		hose->mem_resources[--memno].flags = 0;
 	}
 }
 
diff --git a/arch/powerpc/kernel/process.c b/arch/powerpc/kernel/process.c
index 219f3634115e..957bded0020d 100644
--- a/arch/powerpc/kernel/process.c
+++ b/arch/powerpc/kernel/process.c
@@ -47,6 +47,8 @@
 #ifdef CONFIG_PPC64
 #include <asm/firmware.h>
 #endif
+#include <linux/kprobes.h>
+#include <linux/kdebug.h>
 
 extern unsigned long _get_SP(void);
 
@@ -239,21 +241,53 @@ void discard_lazy_cpu_state(void)
 }
 #endif /* CONFIG_SMP */
 
+void do_dabr(struct pt_regs *regs, unsigned long address,
+		    unsigned long error_code)
+{
+	siginfo_t info;
+
+	if (notify_die(DIE_DABR_MATCH, "dabr_match", regs, error_code,
+			11, SIGSEGV) == NOTIFY_STOP)
+		return;
+
+	if (debugger_dabr_match(regs))
+		return;
+
+	/* Clear the DAC and struct entries.  One shot trigger */
+#if defined(CONFIG_BOOKE)
+	mtspr(SPRN_DBCR0, mfspr(SPRN_DBCR0) & ~(DBSR_DAC1R | DBSR_DAC1W
+							| DBCR0_IDM));
+#endif
+
+	/* Clear the DABR */
+	set_dabr(0);
+
+	/* Deliver the signal to userspace */
+	info.si_signo = SIGTRAP;
+	info.si_errno = 0;
+	info.si_code = TRAP_HWBKPT;
+	info.si_addr = (void __user *)address;
+	force_sig_info(SIGTRAP, &info, current);
+}
+
 static DEFINE_PER_CPU(unsigned long, current_dabr);
 
 int set_dabr(unsigned long dabr)
 {
 	__get_cpu_var(current_dabr) = dabr;
 
-#ifdef CONFIG_PPC_MERGE		/* XXX for now */
 	if (ppc_md.set_dabr)
 		return ppc_md.set_dabr(dabr);
-#endif
 
 	/* XXX should we have a CPU_FTR_HAS_DABR ? */
 #if defined(CONFIG_PPC64) || defined(CONFIG_6xx)
 	mtspr(SPRN_DABR, dabr);
 #endif
+
+#if defined(CONFIG_BOOKE)
+	mtspr(SPRN_DAC1, dabr);
+#endif
+
 	return 0;
 }
 
@@ -337,6 +371,12 @@ struct task_struct *__switch_to(struct task_struct *prev,
 	if (unlikely(__get_cpu_var(current_dabr) != new->thread.dabr))
 		set_dabr(new->thread.dabr);
 
+#if defined(CONFIG_BOOKE)
+	/* If new thread DAC (HW breakpoint) is the same then leave it */
+	if (new->thread.dabr)
+		set_dabr(new->thread.dabr);
+#endif
+
 	new_thread = &new->thread;
 	old_thread = &current->thread;
 
@@ -525,6 +565,10 @@ void flush_thread(void)
 	if (current->thread.dabr) {
 		current->thread.dabr = 0;
 		set_dabr(0);
+
+#if defined(CONFIG_BOOKE)
+		current->thread.dbcr0 &= ~(DBSR_DAC1R | DBSR_DAC1W);
+#endif
 	}
 }
 
diff --git a/arch/powerpc/kernel/prom_init.c b/arch/powerpc/kernel/prom_init.c
index 1ea8c8d3ce89..b72849ac7db3 100644
--- a/arch/powerpc/kernel/prom_init.c
+++ b/arch/powerpc/kernel/prom_init.c
@@ -205,8 +205,6 @@ static int __initdata mem_reserve_cnt;
 static cell_t __initdata regbuf[1024];
 
 
-#define MAX_CPU_THREADS 2
-
 /*
  * Error results ... some OF calls will return "-1" on error, some
  * will return 0, some will return either. To simplify, here are
@@ -643,6 +641,11 @@ static void __init early_cmdline_parse(void)
 #else
 #define OV5_MSI			0x00
 #endif /* CONFIG_PCI_MSI */
+#ifdef CONFIG_PPC_SMLPAR
+#define OV5_CMO			0x80	/* Cooperative Memory Overcommitment */
+#else
+#define OV5_CMO			0x00
+#endif
 
 /*
  * The architecture vector has an array of PVR mask/value pairs,
@@ -687,10 +690,12 @@ static unsigned char ibm_architecture_vec[] = {
 	0,				/* don't halt */
 
 	/* option vector 5: PAPR/OF options */
-	3 - 2,				/* length */
+	5 - 2,				/* length */
 	0,				/* don't ignore, don't halt */
 	OV5_LPAR | OV5_SPLPAR | OV5_LARGE_PAGES | OV5_DRCONF_MEMORY |
 	OV5_DONATE_DEDICATE_CPU | OV5_MSI,
+	0,
+	OV5_CMO,
 };
 
 /* Old method - ELF header with PT_NOTE sections */
@@ -1332,10 +1337,6 @@ static void __init prom_hold_cpus(void)
 	unsigned int reg;
 	phandle node;
 	char type[64];
-	int cpuid = 0;
-	unsigned int interrupt_server[MAX_CPU_THREADS];
-	unsigned int cpu_threads, hw_cpu_num;
-	int propsize;
 	struct prom_t *_prom = &RELOC(prom);
 	unsigned long *spinloop
 		= (void *) LOW_ADDR(__secondary_hold_spinloop);
@@ -1379,7 +1380,6 @@ static void __init prom_hold_cpus(void)
 		reg = -1;
 		prom_getprop(node, "reg", &reg, sizeof(reg));
 
-		prom_debug("\ncpuid        = 0x%x\n", cpuid);
 		prom_debug("cpu hw idx   = 0x%x\n", reg);
 
 		/* Init the acknowledge var which will be reset by
@@ -1388,28 +1388,9 @@ static void __init prom_hold_cpus(void)
 		 */
 		*acknowledge = (unsigned long)-1;
 
-		propsize = prom_getprop(node, "ibm,ppc-interrupt-server#s",
-					&interrupt_server,
-					sizeof(interrupt_server));
-		if (propsize < 0) {
-			/* no property.  old hardware has no SMT */
-			cpu_threads = 1;
-			interrupt_server[0] = reg; /* fake it with phys id */
-		} else {
-			/* We have a threaded processor */
-			cpu_threads = propsize / sizeof(u32);
-			if (cpu_threads > MAX_CPU_THREADS) {
-				prom_printf("SMT: too many threads!\n"
-					    "SMT: found %x, max is %x\n",
-					    cpu_threads, MAX_CPU_THREADS);
-				cpu_threads = 1; /* ToDo: panic? */
-			}
-		}
-
-		hw_cpu_num = interrupt_server[0];
-		if (hw_cpu_num != _prom->cpu) {
+		if (reg != _prom->cpu) {
 			/* Primary Thread of non-boot cpu */
-			prom_printf("%x : starting cpu hw idx %x... ", cpuid, reg);
+			prom_printf("starting cpu hw idx %x... ", reg);
 			call_prom("start-cpu", 3, 0, node,
 				  secondary_hold, reg);
 
@@ -1424,17 +1405,10 @@ static void __init prom_hold_cpus(void)
 		}
 #ifdef CONFIG_SMP
 		else
-			prom_printf("%x : boot cpu     %x\n", cpuid, reg);
+			prom_printf("boot cpu hw idx %x\n", reg);
 #endif /* CONFIG_SMP */
-
-		/* Reserve cpu #s for secondary threads.   They start later. */
-		cpuid += cpu_threads;
 	}
 
-	if (cpuid > NR_CPUS)
-		prom_printf("WARNING: maximum CPUs (" __stringify(NR_CPUS)
-			    ") exceeded: ignoring extras\n");
-
 	prom_debug("prom_hold_cpus: end...\n");
 }
 
diff --git a/arch/powerpc/kernel/ptrace.c b/arch/powerpc/kernel/ptrace.c
index 8feb93e7890c..3635be61f899 100644
--- a/arch/powerpc/kernel/ptrace.c
+++ b/arch/powerpc/kernel/ptrace.c
@@ -22,6 +22,7 @@
 #include <linux/errno.h>
 #include <linux/ptrace.h>
 #include <linux/regset.h>
+#include <linux/tracehook.h>
 #include <linux/elf.h>
 #include <linux/user.h>
 #include <linux/security.h>
@@ -374,7 +375,7 @@ static int vsr_get(struct task_struct *target, const struct user_regset *regset,
 	flush_vsx_to_thread(target);
 
 	for (i = 0; i < 32 ; i++)
-		buf[i] = current->thread.fpr[i][TS_VSRLOWOFFSET];
+		buf[i] = target->thread.fpr[i][TS_VSRLOWOFFSET];
 	ret = user_regset_copyout(&pos, &count, &kbuf, &ubuf,
 				  buf, 0, 32 * sizeof(double));
 
@@ -393,7 +394,7 @@ static int vsr_set(struct task_struct *target, const struct user_regset *regset,
 	ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf,
 				 buf, 0, 32 * sizeof(double));
 	for (i = 0; i < 32 ; i++)
-		current->thread.fpr[i][TS_VSRLOWOFFSET] = buf[i];
+		target->thread.fpr[i][TS_VSRLOWOFFSET] = buf[i];
 
 
 	return ret;
@@ -703,7 +704,7 @@ void user_enable_single_step(struct task_struct *task)
 
 	if (regs != NULL) {
 #if defined(CONFIG_40x) || defined(CONFIG_BOOKE)
-		task->thread.dbcr0 = DBCR0_IDM | DBCR0_IC;
+		task->thread.dbcr0 |= DBCR0_IDM | DBCR0_IC;
 		regs->msr |= MSR_DE;
 #else
 		regs->msr |= MSR_SE;
@@ -716,9 +717,16 @@ void user_disable_single_step(struct task_struct *task)
 {
 	struct pt_regs *regs = task->thread.regs;
 
+
+#if defined(CONFIG_BOOKE)
+	/* If DAC then do not single step, skip */
+	if (task->thread.dabr)
+		return;
+#endif
+
 	if (regs != NULL) {
 #if defined(CONFIG_40x) || defined(CONFIG_BOOKE)
-		task->thread.dbcr0 = 0;
+		task->thread.dbcr0 &= ~(DBCR0_IC | DBCR0_IDM);
 		regs->msr &= ~MSR_DE;
 #else
 		regs->msr &= ~MSR_SE;
@@ -727,22 +735,76 @@ void user_disable_single_step(struct task_struct *task)
 	clear_tsk_thread_flag(task, TIF_SINGLESTEP);
 }
 
-static int ptrace_set_debugreg(struct task_struct *task, unsigned long addr,
+int ptrace_set_debugreg(struct task_struct *task, unsigned long addr,
 			       unsigned long data)
 {
-	/* We only support one DABR and no IABRS at the moment */
+	/* For ppc64 we support one DABR and no IABR's at the moment (ppc64).
+	 *  For embedded processors we support one DAC and no IAC's at the
+	 *  moment.
+	 */
 	if (addr > 0)
 		return -EINVAL;
 
-	/* The bottom 3 bits are flags */
+	/* The bottom 3 bits in dabr are flags */
 	if ((data & ~0x7UL) >= TASK_SIZE)
 		return -EIO;
 
-	/* Ensure translation is on */
+#ifndef CONFIG_BOOKE
+
+	/* For processors using DABR (i.e. 970), the bottom 3 bits are flags.
+	 *  It was assumed, on previous implementations, that 3 bits were
+	 *  passed together with the data address, fitting the design of the
+	 *  DABR register, as follows:
+	 *
+	 *  bit 0: Read flag
+	 *  bit 1: Write flag
+	 *  bit 2: Breakpoint translation
+	 *
+	 *  Thus, we use them here as so.
+	 */
+
+	/* Ensure breakpoint translation bit is set */
 	if (data && !(data & DABR_TRANSLATION))
 		return -EIO;
 
+	/* Move contents to the DABR register */
 	task->thread.dabr = data;
+
+#endif
+#if defined(CONFIG_BOOKE)
+
+	/* As described above, it was assumed 3 bits were passed with the data
+	 *  address, but we will assume only the mode bits will be passed
+	 *  as to not cause alignment restrictions for DAC-based processors.
+	 */
+
+	/* DAC's hold the whole address without any mode flags */
+	task->thread.dabr = data & ~0x3UL;
+
+	if (task->thread.dabr == 0) {
+		task->thread.dbcr0 &= ~(DBSR_DAC1R | DBSR_DAC1W | DBCR0_IDM);
+		task->thread.regs->msr &= ~MSR_DE;
+		return 0;
+	}
+
+	/* Read or Write bits must be set */
+
+	if (!(data & 0x3UL))
+		return -EINVAL;
+
+	/* Set the Internal Debugging flag (IDM bit 1) for the DBCR0
+	   register */
+	task->thread.dbcr0 = DBCR0_IDM;
+
+	/* Check for write and read flags and set DBCR0
+	   accordingly */
+	if (data & 0x1UL)
+		task->thread.dbcr0 |= DBSR_DAC1R;
+	if (data & 0x2UL)
+		task->thread.dbcr0 |= DBSR_DAC1W;
+
+	task->thread.regs->msr |= MSR_DE;
+#endif
 	return 0;
 }
 
@@ -913,15 +975,13 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data)
 	case PTRACE_GETVSRREGS:
 		return copy_regset_to_user(child, &user_ppc_native_view,
 					   REGSET_VSX,
-					   0, (32 * sizeof(vector128) +
-					       sizeof(u32)),
+					   0, 32 * sizeof(double),
 					   (void __user *) data);
 
 	case PTRACE_SETVSRREGS:
 		return copy_regset_from_user(child, &user_ppc_native_view,
 					     REGSET_VSX,
-					     0, (32 * sizeof(vector128) +
-						 sizeof(u32)),
+					     0, 32 * sizeof(double),
 					     (const void __user *) data);
 #endif
 #ifdef CONFIG_SPE
@@ -953,31 +1013,24 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data)
 	return ret;
 }
 
-static void do_syscall_trace(void)
+/*
+ * We must return the syscall number to actually look up in the table.
+ * This can be -1L to skip running any syscall at all.
+ */
+long do_syscall_trace_enter(struct pt_regs *regs)
 {
-	/* the 0x80 provides a way for the tracing parent to distinguish
-	   between a syscall stop and SIGTRAP delivery */
-	ptrace_notify(SIGTRAP | ((current->ptrace & PT_TRACESYSGOOD)
-				 ? 0x80 : 0));
-
-	/*
-	 * this isn't the same as continuing with a signal, but it will do
-	 * for normal use.  strace only continues with a signal if the
-	 * stopping signal is not SIGTRAP.  -brl
-	 */
-	if (current->exit_code) {
-		send_sig(current->exit_code, current, 1);
-		current->exit_code = 0;
-	}
-}
+	long ret = 0;
 
-void do_syscall_trace_enter(struct pt_regs *regs)
-{
 	secure_computing(regs->gpr[0]);
 
-	if (test_thread_flag(TIF_SYSCALL_TRACE)
-	    && (current->ptrace & PT_PTRACED))
-		do_syscall_trace();
+	if (test_thread_flag(TIF_SYSCALL_TRACE) &&
+	    tracehook_report_syscall_entry(regs))
+		/*
+		 * Tracing decided this syscall should not happen.
+		 * We'll return a bogus call number to get an ENOSYS
+		 * error, but leave the original number in regs->gpr[0].
+		 */
+		ret = -1L;
 
 	if (unlikely(current->audit_context)) {
 #ifdef CONFIG_PPC64
@@ -995,16 +1048,19 @@ void do_syscall_trace_enter(struct pt_regs *regs)
 					    regs->gpr[5] & 0xffffffff,
 					    regs->gpr[6] & 0xffffffff);
 	}
+
+	return ret ?: regs->gpr[0];
 }
 
 void do_syscall_trace_leave(struct pt_regs *regs)
 {
+	int step;
+
 	if (unlikely(current->audit_context))
 		audit_syscall_exit((regs->ccr&0x10000000)?AUDITSC_FAILURE:AUDITSC_SUCCESS,
 				   regs->result);
 
-	if ((test_thread_flag(TIF_SYSCALL_TRACE)
-	     || test_thread_flag(TIF_SINGLESTEP))
-	    && (current->ptrace & PT_PTRACED))
-		do_syscall_trace();
+	step = test_thread_flag(TIF_SINGLESTEP);
+	if (step || test_thread_flag(TIF_SYSCALL_TRACE))
+		tracehook_report_syscall_exit(regs, step);
 }
diff --git a/arch/powerpc/kernel/ptrace32.c b/arch/powerpc/kernel/ptrace32.c
index 67bf1a1e7e14..197d49c790ad 100644
--- a/arch/powerpc/kernel/ptrace32.c
+++ b/arch/powerpc/kernel/ptrace32.c
@@ -294,6 +294,8 @@ long compat_arch_ptrace(struct task_struct *child, compat_long_t request,
 	case PTRACE_SETFPREGS:
 	case PTRACE_GETVRREGS:
 	case PTRACE_SETVRREGS:
+	case PTRACE_GETVSRREGS:
+	case PTRACE_SETVSRREGS:
 	case PTRACE_GETREGS64:
 	case PTRACE_SETREGS64:
 	case PPC_PTRACE_GETFPREGS:
diff --git a/arch/powerpc/kernel/rtas.c b/arch/powerpc/kernel/rtas.c
index c680f1bbd387..1f8505c23548 100644
--- a/arch/powerpc/kernel/rtas.c
+++ b/arch/powerpc/kernel/rtas.c
@@ -792,6 +792,9 @@ asmlinkage int ppc_rtas(struct rtas_args __user *uargs)
 	if (args.token == RTAS_UNKNOWN_SERVICE)
 		return -EINVAL;
 
+	args.rets = &args.args[nargs];
+	memset(args.rets, 0, args.nret * sizeof(rtas_arg_t));
+
 	/* Need to handle ibm,suspend_me call specially */
 	if (args.token == ibm_suspend_me_token) {
 		rc = rtas_ibm_suspend_me(&args);
@@ -808,8 +811,6 @@ asmlinkage int ppc_rtas(struct rtas_args __user *uargs)
 	enter_rtas(__pa(&rtas.args));
 	args = rtas.args;
 
-	args.rets = &args.args[nargs];
-
 	/* A -1 return code indicates that the last command couldn't
 	   be completed due to a hardware error. */
 	if (args.rets[0] == -1)
diff --git a/arch/powerpc/kernel/rtas_flash.c b/arch/powerpc/kernel/rtas_flash.c
index 09ded5c424a9..149cb112cd1a 100644
--- a/arch/powerpc/kernel/rtas_flash.c
+++ b/arch/powerpc/kernel/rtas_flash.c
@@ -286,7 +286,7 @@ static ssize_t rtas_flash_read(struct file *file, char __user *buf,
 }
 
 /* constructor for flash_block_cache */
-void rtas_block_ctor(struct kmem_cache *cache, void *ptr)
+void rtas_block_ctor(void *ptr)
 {
 	memset(ptr, 0, RTAS_BLK_SIZE);
 }
diff --git a/arch/powerpc/kernel/setup-common.c b/arch/powerpc/kernel/setup-common.c
index 61a3f4132087..9cc5a52711e5 100644
--- a/arch/powerpc/kernel/setup-common.c
+++ b/arch/powerpc/kernel/setup-common.c
@@ -367,7 +367,6 @@ static void __init cpu_init_thread_core_maps(int tpc)
  * setup_cpu_maps - initialize the following cpu maps:
  *                  cpu_possible_map
  *                  cpu_present_map
- *                  cpu_sibling_map
  *
  * Having the possible map set up early allows us to restrict allocations
  * of things like irqstacks to num_possible_cpus() rather than NR_CPUS.
@@ -475,29 +474,6 @@ void __init smp_setup_cpu_maps(void)
 	 */
 	cpu_init_thread_core_maps(nthreads);
 }
-
-/*
- * Being that cpu_sibling_map is now a per_cpu array, then it cannot
- * be initialized until the per_cpu areas have been created.  This
- * function is now called from setup_per_cpu_areas().
- */
-void __init smp_setup_cpu_sibling_map(void)
-{
-#ifdef CONFIG_PPC64
-	int i, cpu, base;
-
-	for_each_possible_cpu(cpu) {
-		DBG("Sibling map for CPU %d:", cpu);
-		base = cpu_first_thread_in_core(cpu);
-		for (i = 0; i < threads_per_core; i++) {
-			cpu_set(base + i, per_cpu(cpu_sibling_map, cpu));
-			DBG(" %d", base + i);
-		}
-		DBG("\n");
-	}
-
-#endif /* CONFIG_PPC64 */
-}
 #endif /* CONFIG_SMP */
 
 #ifdef CONFIG_PCSPKR_PLATFORM
diff --git a/arch/powerpc/kernel/setup_64.c b/arch/powerpc/kernel/setup_64.c
index 04d8de9f0fc6..8b25f51f03bf 100644
--- a/arch/powerpc/kernel/setup_64.c
+++ b/arch/powerpc/kernel/setup_64.c
@@ -611,9 +611,6 @@ void __init setup_per_cpu_areas(void)
 		paca[i].data_offset = ptr - __per_cpu_start;
 		memcpy(ptr, __per_cpu_start, __per_cpu_end - __per_cpu_start);
 	}
-
-	/* Now that per_cpu is setup, initialize cpu_sibling_map */
-	smp_setup_cpu_sibling_map();
 }
 #endif
 
diff --git a/arch/powerpc/kernel/signal.c b/arch/powerpc/kernel/signal.c
index ad55488939c3..a54405ebd7b0 100644
--- a/arch/powerpc/kernel/signal.c
+++ b/arch/powerpc/kernel/signal.c
@@ -9,7 +9,7 @@
  * this archive for more details.
  */
 
-#include <linux/ptrace.h>
+#include <linux/tracehook.h>
 #include <linux/signal.h>
 #include <asm/uaccess.h>
 #include <asm/unistd.h>
@@ -112,7 +112,7 @@ static void check_syscall_restart(struct pt_regs *regs, struct k_sigaction *ka,
 	}
 }
 
-int do_signal(sigset_t *oldset, struct pt_regs *regs)
+static int do_signal_pending(sigset_t *oldset, struct pt_regs *regs)
 {
 	siginfo_t info;
 	int signr;
@@ -145,8 +145,12 @@ int do_signal(sigset_t *oldset, struct pt_regs *regs)
 	 * user space. The DABR will have been cleared if it
 	 * triggered inside the kernel.
 	 */
-	if (current->thread.dabr)
+	if (current->thread.dabr) {
 		set_dabr(current->thread.dabr);
+#if defined(CONFIG_BOOKE)
+		mtspr(SPRN_DBCR0, current->thread.dbcr0);
+#endif
+	}
 
 	if (is32) {
         	if (ka.sa.sa_flags & SA_SIGINFO)
@@ -173,11 +177,28 @@ int do_signal(sigset_t *oldset, struct pt_regs *regs)
 		 * its frame, and we can clear the TLF_RESTORE_SIGMASK flag.
 		 */
 		current_thread_info()->local_flags &= ~_TLF_RESTORE_SIGMASK;
+
+		/*
+		 * Let tracing know that we've done the handler setup.
+		 */
+		tracehook_signal_handler(signr, &info, &ka, regs,
+					 test_thread_flag(TIF_SINGLESTEP));
 	}
 
 	return ret;
 }
 
+void do_signal(struct pt_regs *regs, unsigned long thread_info_flags)
+{
+	if (thread_info_flags & _TIF_SIGPENDING)
+		do_signal_pending(NULL, regs);
+
+	if (thread_info_flags & _TIF_NOTIFY_RESUME) {
+		clear_thread_flag(TIF_NOTIFY_RESUME);
+		tracehook_notify_resume(regs);
+	}
+}
+
 long sys_sigaltstack(const stack_t __user *uss, stack_t __user *uoss,
 		unsigned long r5, unsigned long r6, unsigned long r7,
 		unsigned long r8, struct pt_regs *regs)
diff --git a/arch/powerpc/kernel/smp.c b/arch/powerpc/kernel/smp.c
index f5ae9fa222ea..5337ca7bb649 100644
--- a/arch/powerpc/kernel/smp.c
+++ b/arch/powerpc/kernel/smp.c
@@ -41,6 +41,7 @@
 #include <asm/smp.h>
 #include <asm/time.h>
 #include <asm/machdep.h>
+#include <asm/cputhreads.h>
 #include <asm/cputable.h>
 #include <asm/system.h>
 #include <asm/mpic.h>
@@ -62,10 +63,12 @@ struct thread_info *secondary_ti;
 cpumask_t cpu_possible_map = CPU_MASK_NONE;
 cpumask_t cpu_online_map = CPU_MASK_NONE;
 DEFINE_PER_CPU(cpumask_t, cpu_sibling_map) = CPU_MASK_NONE;
+DEFINE_PER_CPU(cpumask_t, cpu_core_map) = CPU_MASK_NONE;
 
 EXPORT_SYMBOL(cpu_online_map);
 EXPORT_SYMBOL(cpu_possible_map);
 EXPORT_PER_CPU_SYMBOL(cpu_sibling_map);
+EXPORT_PER_CPU_SYMBOL(cpu_core_map);
 
 /* SMP operations for this machine */
 struct smp_ops_t *smp_ops;
@@ -228,6 +231,8 @@ void __devinit smp_prepare_boot_cpu(void)
 	BUG_ON(smp_processor_id() != boot_cpuid);
 
 	cpu_set(boot_cpuid, cpu_online_map);
+	cpu_set(boot_cpuid, per_cpu(cpu_sibling_map, boot_cpuid));
+	cpu_set(boot_cpuid, per_cpu(cpu_core_map, boot_cpuid));
 #ifdef CONFIG_PPC64
 	paca[boot_cpuid].__current = current;
 #endif
@@ -375,11 +380,60 @@ int __cpuinit __cpu_up(unsigned int cpu)
 	return 0;
 }
 
+/* Return the value of the reg property corresponding to the given
+ * logical cpu.
+ */
+int cpu_to_core_id(int cpu)
+{
+	struct device_node *np;
+	const int *reg;
+	int id = -1;
+
+	np = of_get_cpu_node(cpu, NULL);
+	if (!np)
+		goto out;
+
+	reg = of_get_property(np, "reg", NULL);
+	if (!reg)
+		goto out;
+
+	id = *reg;
+out:
+	of_node_put(np);
+	return id;
+}
+
+/* Must be called when no change can occur to cpu_present_map,
+ * i.e. during cpu online or offline.
+ */
+static struct device_node *cpu_to_l2cache(int cpu)
+{
+	struct device_node *np;
+	const phandle *php;
+	phandle ph;
+
+	if (!cpu_present(cpu))
+		return NULL;
+
+	np = of_get_cpu_node(cpu, NULL);
+	if (np == NULL)
+		return NULL;
+
+	php = of_get_property(np, "l2-cache", NULL);
+	if (php == NULL)
+		return NULL;
+	ph = *php;
+	of_node_put(np);
+
+	return of_find_node_by_phandle(ph);
+}
 
 /* Activate a secondary processor. */
 int __devinit start_secondary(void *unused)
 {
 	unsigned int cpu = smp_processor_id();
+	struct device_node *l2_cache;
+	int i, base;
 
 	atomic_inc(&init_mm.mm_count);
 	current->active_mm = &init_mm;
@@ -400,6 +454,33 @@ int __devinit start_secondary(void *unused)
 
 	ipi_call_lock();
 	cpu_set(cpu, cpu_online_map);
+	/* Update sibling maps */
+	base = cpu_first_thread_in_core(cpu);
+	for (i = 0; i < threads_per_core; i++) {
+		if (cpu_is_offline(base + i))
+			continue;
+		cpu_set(cpu, per_cpu(cpu_sibling_map, base + i));
+		cpu_set(base + i, per_cpu(cpu_sibling_map, cpu));
+
+		/* cpu_core_map should be a superset of
+		 * cpu_sibling_map even if we don't have cache
+		 * information, so update the former here, too.
+		 */
+		cpu_set(cpu, per_cpu(cpu_core_map, base +i));
+		cpu_set(base + i, per_cpu(cpu_core_map, cpu));
+	}
+	l2_cache = cpu_to_l2cache(cpu);
+	for_each_online_cpu(i) {
+		struct device_node *np = cpu_to_l2cache(i);
+		if (!np)
+			continue;
+		if (np == l2_cache) {
+			cpu_set(cpu, per_cpu(cpu_core_map, i));
+			cpu_set(i, per_cpu(cpu_core_map, cpu));
+		}
+		of_node_put(np);
+	}
+	of_node_put(l2_cache);
 	ipi_call_unlock();
 
 	local_irq_enable();
@@ -437,10 +518,42 @@ void __init smp_cpus_done(unsigned int max_cpus)
 #ifdef CONFIG_HOTPLUG_CPU
 int __cpu_disable(void)
 {
-	if (smp_ops->cpu_disable)
-		return smp_ops->cpu_disable();
+	struct device_node *l2_cache;
+	int cpu = smp_processor_id();
+	int base, i;
+	int err;
 
-	return -ENOSYS;
+	if (!smp_ops->cpu_disable)
+		return -ENOSYS;
+
+	err = smp_ops->cpu_disable();
+	if (err)
+		return err;
+
+	/* Update sibling maps */
+	base = cpu_first_thread_in_core(cpu);
+	for (i = 0; i < threads_per_core; i++) {
+		cpu_clear(cpu, per_cpu(cpu_sibling_map, base + i));
+		cpu_clear(base + i, per_cpu(cpu_sibling_map, cpu));
+		cpu_clear(cpu, per_cpu(cpu_core_map, base +i));
+		cpu_clear(base + i, per_cpu(cpu_core_map, cpu));
+	}
+
+	l2_cache = cpu_to_l2cache(cpu);
+	for_each_present_cpu(i) {
+		struct device_node *np = cpu_to_l2cache(i);
+		if (!np)
+			continue;
+		if (np == l2_cache) {
+			cpu_clear(cpu, per_cpu(cpu_core_map, i));
+			cpu_clear(i, per_cpu(cpu_core_map, cpu));
+		}
+		of_node_put(np);
+	}
+	of_node_put(l2_cache);
+
+
+	return 0;
 }
 
 void __cpu_die(unsigned int cpu)
diff --git a/arch/powerpc/kernel/stacktrace.c b/arch/powerpc/kernel/stacktrace.c
index f2589645870a..b0dbb1daa4df 100644
--- a/arch/powerpc/kernel/stacktrace.c
+++ b/arch/powerpc/kernel/stacktrace.c
@@ -13,7 +13,6 @@
 #include <linux/module.h>
 #include <linux/sched.h>
 #include <linux/stacktrace.h>
-#include <linux/module.h>
 #include <asm/ptrace.h>
 #include <asm/processor.h>
 
diff --git a/arch/powerpc/kernel/sys_ppc32.c b/arch/powerpc/kernel/sys_ppc32.c
index 709f8cb8bfca..d98634c76060 100644
--- a/arch/powerpc/kernel/sys_ppc32.c
+++ b/arch/powerpc/kernel/sys_ppc32.c
@@ -52,63 +52,6 @@
 #include <asm/ppc-pci.h>
 #include <asm/syscalls.h>
 
-struct old_linux_dirent32 {
-	u32		d_ino;
-	u32		d_offset;
-	unsigned short	d_namlen;
-	char		d_name[1];
-};
-
-struct readdir_callback32 {
-	struct old_linux_dirent32 __user * dirent;
-	int count;
-};
-
-static int fillonedir(void * __buf, const char * name, int namlen,
-		                  off_t offset, u64 ino, unsigned int d_type)
-{
-	struct readdir_callback32 * buf = (struct readdir_callback32 *) __buf;
-	struct old_linux_dirent32 __user * dirent;
-	ino_t d_ino;
-
-	if (buf->count)
-		return -EINVAL;
-	d_ino = ino;
-	if (sizeof(d_ino) < sizeof(ino) && d_ino != ino)
-		return -EOVERFLOW;
-	buf->count++;
-	dirent = buf->dirent;
-	put_user(d_ino, &dirent->d_ino);
-	put_user(offset, &dirent->d_offset);
-	put_user(namlen, &dirent->d_namlen);
-	copy_to_user(dirent->d_name, name, namlen);
-	put_user(0, dirent->d_name + namlen);
-	return 0;
-}
-
-asmlinkage int old32_readdir(unsigned int fd, struct old_linux_dirent32 __user *dirent, unsigned int count)
-{
-	int error = -EBADF;
-	struct file * file;
-	struct readdir_callback32 buf;
-
-	file = fget(fd);
-	if (!file)
-		goto out;
-
-	buf.count = 0;
-	buf.dirent = dirent;
-
-	error = vfs_readdir(file, (filldir_t)fillonedir, &buf);
-	if (error < 0)
-		goto out_putf;
-	error = buf.count;
-
-out_putf:
-	fput(file);
-out:
-	return error;
-}
 
 asmlinkage long ppc32_select(u32 n, compat_ulong_t __user *inp,
 		compat_ulong_t __user *outp, compat_ulong_t __user *exp,
diff --git a/arch/powerpc/kernel/sysfs.c b/arch/powerpc/kernel/sysfs.c
index aba0ba95f062..56d172d16e56 100644
--- a/arch/powerpc/kernel/sysfs.c
+++ b/arch/powerpc/kernel/sysfs.c
@@ -22,6 +22,8 @@
 
 static DEFINE_PER_CPU(struct cpu, cpu_devices);
 
+static DEFINE_PER_CPU(struct kobject *, cache_toplevel);
+
 /* SMT stuff */
 
 #ifdef CONFIG_PPC_MULTIPLATFORM
@@ -297,8 +299,289 @@ static struct sysdev_attribute pa6t_attrs[] = {
 #endif /* CONFIG_DEBUG_KERNEL */
 };
 
+struct cache_desc {
+	struct kobject kobj;
+	struct cache_desc *next;
+	const char *type;	/* Instruction, Data, or Unified */
+	u32 size;		/* total cache size in KB */
+	u32 line_size;		/* in bytes */
+	u32 nr_sets;		/* number of sets */
+	u32 level;		/* e.g. 1, 2, 3... */
+	u32 associativity;	/* e.g. 8-way... 0 is fully associative */
+};
+
+DEFINE_PER_CPU(struct cache_desc *, cache_desc);
+
+static struct cache_desc *kobj_to_cache_desc(struct kobject *k)
+{
+	return container_of(k, struct cache_desc, kobj);
+}
+
+static void cache_desc_release(struct kobject *k)
+{
+	struct cache_desc *desc = kobj_to_cache_desc(k);
+
+	pr_debug("%s: releasing %s\n", __func__, kobject_name(k));
+
+	if (desc->next)
+		kobject_put(&desc->next->kobj);
+
+	kfree(kobj_to_cache_desc(k));
+}
+
+static ssize_t cache_desc_show(struct kobject *k, struct attribute *attr, char *buf)
+{
+	struct kobj_attribute *kobj_attr;
+
+	kobj_attr = container_of(attr, struct kobj_attribute, attr);
+
+	return kobj_attr->show(k, kobj_attr, buf);
+}
+
+static struct sysfs_ops cache_desc_sysfs_ops = {
+	.show = cache_desc_show,
+};
+
+static struct kobj_type cache_desc_type = {
+	.release = cache_desc_release,
+	.sysfs_ops = &cache_desc_sysfs_ops,
+};
+
+static ssize_t cache_size_show(struct kobject *k, struct kobj_attribute *attr, char *buf)
+{
+	struct cache_desc *cache = kobj_to_cache_desc(k);
+
+	return sprintf(buf, "%uK\n", cache->size);
+}
+
+static struct kobj_attribute cache_size_attr =
+	__ATTR(size, 0444, cache_size_show, NULL);
+
+static ssize_t cache_line_size_show(struct kobject *k, struct kobj_attribute *attr, char *buf)
+{
+	struct cache_desc *cache = kobj_to_cache_desc(k);
+
+	return sprintf(buf, "%u\n", cache->line_size);
+}
+
+static struct kobj_attribute cache_line_size_attr =
+	__ATTR(coherency_line_size, 0444, cache_line_size_show, NULL);
+
+static ssize_t cache_nr_sets_show(struct kobject *k, struct kobj_attribute *attr, char *buf)
+{
+	struct cache_desc *cache = kobj_to_cache_desc(k);
+
+	return sprintf(buf, "%u\n", cache->nr_sets);
+}
+
+static struct kobj_attribute cache_nr_sets_attr =
+	__ATTR(number_of_sets, 0444, cache_nr_sets_show, NULL);
+
+static ssize_t cache_type_show(struct kobject *k, struct kobj_attribute *attr, char *buf)
+{
+	struct cache_desc *cache = kobj_to_cache_desc(k);
+
+	return sprintf(buf, "%s\n", cache->type);
+}
+
+static struct kobj_attribute cache_type_attr =
+	__ATTR(type, 0444, cache_type_show, NULL);
+
+static ssize_t cache_level_show(struct kobject *k, struct kobj_attribute *attr, char *buf)
+{
+	struct cache_desc *cache = kobj_to_cache_desc(k);
+
+	return sprintf(buf, "%u\n", cache->level);
+}
+
+static struct kobj_attribute cache_level_attr =
+	__ATTR(level, 0444, cache_level_show, NULL);
+
+static ssize_t cache_assoc_show(struct kobject *k, struct kobj_attribute *attr, char *buf)
+{
+	struct cache_desc *cache = kobj_to_cache_desc(k);
+
+	return sprintf(buf, "%u\n", cache->associativity);
+}
+
+static struct kobj_attribute cache_assoc_attr =
+	__ATTR(ways_of_associativity, 0444, cache_assoc_show, NULL);
+
+struct cache_desc_info {
+	const char *type;
+	const char *size_prop;
+	const char *line_size_prop;
+	const char *nr_sets_prop;
+};
+
+/* PowerPC Processor binding says the [di]-cache-* must be equal on
+ * unified caches, so just use d-cache properties. */
+static struct cache_desc_info ucache_info = {
+	.type = "Unified",
+	.size_prop = "d-cache-size",
+	.line_size_prop = "d-cache-line-size",
+	.nr_sets_prop = "d-cache-sets",
+};
 
-static void register_cpu_online(unsigned int cpu)
+static struct cache_desc_info dcache_info = {
+	.type = "Data",
+	.size_prop = "d-cache-size",
+	.line_size_prop = "d-cache-line-size",
+	.nr_sets_prop = "d-cache-sets",
+};
+
+static struct cache_desc_info icache_info = {
+	.type = "Instruction",
+	.size_prop = "i-cache-size",
+	.line_size_prop = "i-cache-line-size",
+	.nr_sets_prop = "i-cache-sets",
+};
+
+static struct cache_desc * __cpuinit create_cache_desc(struct device_node *np, struct kobject *parent, int index, int level, struct cache_desc_info *info)
+{
+	const u32 *cache_line_size;
+	struct cache_desc *new;
+	const u32 *cache_size;
+	const u32 *nr_sets;
+	int rc;
+
+	new = kzalloc(sizeof(*new), GFP_KERNEL);
+	if (!new)
+		return NULL;
+
+	rc = kobject_init_and_add(&new->kobj, &cache_desc_type, parent,
+				  "index%d", index);
+	if (rc)
+		goto err;
+
+	/* type */
+	new->type = info->type;
+	rc = sysfs_create_file(&new->kobj, &cache_type_attr.attr);
+	WARN_ON(rc);
+
+	/* level */
+	new->level = level;
+	rc = sysfs_create_file(&new->kobj, &cache_level_attr.attr);
+	WARN_ON(rc);
+
+	/* size */
+	cache_size = of_get_property(np, info->size_prop, NULL);
+	if (cache_size) {
+		new->size = *cache_size / 1024;
+		rc = sysfs_create_file(&new->kobj,
+				       &cache_size_attr.attr);
+		WARN_ON(rc);
+	}
+
+	/* coherency_line_size */
+	cache_line_size = of_get_property(np, info->line_size_prop, NULL);
+	if (cache_line_size) {
+		new->line_size = *cache_line_size;
+		rc = sysfs_create_file(&new->kobj,
+				       &cache_line_size_attr.attr);
+		WARN_ON(rc);
+	}
+
+	/* number_of_sets */
+	nr_sets = of_get_property(np, info->nr_sets_prop, NULL);
+	if (nr_sets) {
+		new->nr_sets = *nr_sets;
+		rc = sysfs_create_file(&new->kobj,
+				       &cache_nr_sets_attr.attr);
+		WARN_ON(rc);
+	}
+
+	/* ways_of_associativity */
+	if (new->nr_sets == 1) {
+		/* fully associative */
+		new->associativity = 0;
+		goto create_assoc;
+	}
+
+	if (new->nr_sets && new->size && new->line_size) {
+		/* If we have values for all of these we can derive
+		 * the associativity. */
+		new->associativity =
+			((new->size * 1024) / new->nr_sets) / new->line_size;
+create_assoc:
+		rc = sysfs_create_file(&new->kobj,
+				       &cache_assoc_attr.attr);
+		WARN_ON(rc);
+	}
+
+	return new;
+err:
+	kfree(new);
+	return NULL;
+}
+
+static bool cache_is_unified(struct device_node *np)
+{
+	return of_get_property(np, "cache-unified", NULL);
+}
+
+static struct cache_desc * __cpuinit create_cache_index_info(struct device_node *np, struct kobject *parent, int index, int level)
+{
+	const phandle *next_cache_phandle;
+	struct device_node *next_cache;
+	struct cache_desc *new, **end;
+
+	pr_debug("%s(node = %s, index = %d)\n", __func__, np->full_name, index);
+
+	if (cache_is_unified(np)) {
+		new = create_cache_desc(np, parent, index, level,
+					&ucache_info);
+	} else {
+		new = create_cache_desc(np, parent, index, level,
+					&dcache_info);
+		if (new) {
+			index++;
+			new->next = create_cache_desc(np, parent, index, level,
+						      &icache_info);
+		}
+	}
+	if (!new)
+		return NULL;
+
+	end = &new->next;
+	while (*end)
+		end = &(*end)->next;
+
+	next_cache_phandle = of_get_property(np, "l2-cache", NULL);
+	if (!next_cache_phandle)
+		goto out;
+
+	next_cache = of_find_node_by_phandle(*next_cache_phandle);
+	if (!next_cache)
+		goto out;
+
+	*end = create_cache_index_info(next_cache, parent, ++index, ++level);
+
+	of_node_put(next_cache);
+out:
+	return new;
+}
+
+static void __cpuinit create_cache_info(struct sys_device *sysdev)
+{
+	struct kobject *cache_toplevel;
+	struct device_node *np = NULL;
+	int cpu = sysdev->id;
+
+	cache_toplevel = kobject_create_and_add("cache", &sysdev->kobj);
+	if (!cache_toplevel)
+		return;
+	per_cpu(cache_toplevel, cpu) = cache_toplevel;
+	np = of_get_cpu_node(cpu, NULL);
+	if (np != NULL) {
+		per_cpu(cache_desc, cpu) =
+			create_cache_index_info(np, cache_toplevel, 0, 1);
+		of_node_put(np);
+	}
+	return;
+}
+
+static void __cpuinit register_cpu_online(unsigned int cpu)
 {
 	struct cpu *c = &per_cpu(cpu_devices, cpu);
 	struct sys_device *s = &c->sysdev;
@@ -346,9 +629,33 @@ static void register_cpu_online(unsigned int cpu)
 
 	if (cpu_has_feature(CPU_FTR_DSCR))
 		sysdev_create_file(s, &attr_dscr);
+
+	create_cache_info(s);
 }
 
 #ifdef CONFIG_HOTPLUG_CPU
+static void remove_cache_info(struct sys_device *sysdev)
+{
+	struct kobject *cache_toplevel;
+	struct cache_desc *cache_desc;
+	int cpu = sysdev->id;
+
+	cache_desc = per_cpu(cache_desc, cpu);
+	if (cache_desc != NULL) {
+		sysfs_remove_file(&cache_desc->kobj, &cache_size_attr.attr);
+		sysfs_remove_file(&cache_desc->kobj, &cache_line_size_attr.attr);
+		sysfs_remove_file(&cache_desc->kobj, &cache_type_attr.attr);
+		sysfs_remove_file(&cache_desc->kobj, &cache_level_attr.attr);
+		sysfs_remove_file(&cache_desc->kobj, &cache_nr_sets_attr.attr);
+		sysfs_remove_file(&cache_desc->kobj, &cache_assoc_attr.attr);
+
+		kobject_put(&cache_desc->kobj);
+	}
+	cache_toplevel = per_cpu(cache_toplevel, cpu);
+	if (cache_toplevel != NULL)
+		kobject_put(cache_toplevel);
+}
+
 static void unregister_cpu_online(unsigned int cpu)
 {
 	struct cpu *c = &per_cpu(cpu_devices, cpu);
@@ -399,6 +706,8 @@ static void unregister_cpu_online(unsigned int cpu)
 
 	if (cpu_has_feature(CPU_FTR_DSCR))
 		sysdev_remove_file(s, &attr_dscr);
+
+	remove_cache_info(s);
 }
 #endif /* CONFIG_HOTPLUG_CPU */
 
@@ -529,7 +838,8 @@ static void register_nodes(void)
 #endif
 
 /* Only valid if CPU is present. */
-static ssize_t show_physical_id(struct sys_device *dev, char *buf)
+static ssize_t show_physical_id(struct sys_device *dev,
+				struct sysdev_attribute *attr, char *buf)
 {
 	struct cpu *cpu = container_of(dev, struct cpu, sysdev);
 
diff --git a/arch/powerpc/kernel/traps.c b/arch/powerpc/kernel/traps.c
index 878fbddb6ae1..81ccb8dd1a54 100644
--- a/arch/powerpc/kernel/traps.c
+++ b/arch/powerpc/kernel/traps.c
@@ -1067,6 +1067,22 @@ void __kprobes DebugException(struct pt_regs *regs, unsigned long debug_status)
 		}
 
 		_exception(SIGTRAP, regs, TRAP_TRACE, regs->nip);
+	} else if (debug_status & (DBSR_DAC1R | DBSR_DAC1W)) {
+		regs->msr &= ~MSR_DE;
+
+		if (user_mode(regs)) {
+			current->thread.dbcr0 &= ~(DBSR_DAC1R | DBSR_DAC1W |
+								DBCR0_IDM);
+		} else {
+			/* Disable DAC interupts */
+			mtspr(SPRN_DBCR0, mfspr(SPRN_DBCR0) & ~(DBSR_DAC1R |
+						DBSR_DAC1W | DBCR0_IDM));
+
+			/* Clear the DAC event */
+			mtspr(SPRN_DBSR, (DBSR_DAC1R | DBSR_DAC1W));
+		}
+		/* Setup and send the trap to the handler */
+		do_dabr(regs, mfspr(SPRN_DAC1), debug_status);
 	}
 }
 #endif /* CONFIG_4xx || CONFIG_BOOKE */
diff --git a/arch/powerpc/kernel/vdso.c b/arch/powerpc/kernel/vdso.c
index f177c60ea766..65639a43e644 100644
--- a/arch/powerpc/kernel/vdso.c
+++ b/arch/powerpc/kernel/vdso.c
@@ -788,9 +788,7 @@ static int __init vdso_init(void)
 
 	return 0;
 }
-#ifdef CONFIG_PPC_MERGE
 arch_initcall(vdso_init);
-#endif
 
 int in_gate_area_no_task(unsigned long addr)
 {
diff --git a/arch/powerpc/kernel/vio.c b/arch/powerpc/kernel/vio.c
index b77f8af7ddde..2750fbab1975 100644
--- a/arch/powerpc/kernel/vio.c
+++ b/arch/powerpc/kernel/vio.c
@@ -1,11 +1,12 @@
 /*
  * IBM PowerPC Virtual I/O Infrastructure Support.
  *
- *    Copyright (c) 2003-2005 IBM Corp.
+ *    Copyright (c) 2003,2008 IBM Corp.
  *     Dave Engebretsen engebret@us.ibm.com
  *     Santiago Leon santil@us.ibm.com
  *     Hollis Blanchard <hollisb@us.ibm.com>
  *     Stephen Rothwell
+ *     Robert Jennings <rcjenn@us.ibm.com>
  *
  *      This program is free software; you can redistribute it and/or
  *      modify it under the terms of the GNU General Public License
@@ -46,6 +47,996 @@ static struct vio_dev vio_bus_device  = { /* fake "parent" device */
 	.dev.bus = &vio_bus_type,
 };
 
+#ifdef CONFIG_PPC_SMLPAR
+/**
+ * vio_cmo_pool - A pool of IO memory for CMO use
+ *
+ * @size: The size of the pool in bytes
+ * @free: The amount of free memory in the pool
+ */
+struct vio_cmo_pool {
+	size_t size;
+	size_t free;
+};
+
+/* How many ms to delay queued balance work */
+#define VIO_CMO_BALANCE_DELAY 100
+
+/* Portion out IO memory to CMO devices by this chunk size */
+#define VIO_CMO_BALANCE_CHUNK 131072
+
+/**
+ * vio_cmo_dev_entry - A device that is CMO-enabled and requires entitlement
+ *
+ * @vio_dev: struct vio_dev pointer
+ * @list: pointer to other devices on bus that are being tracked
+ */
+struct vio_cmo_dev_entry {
+	struct vio_dev *viodev;
+	struct list_head list;
+};
+
+/**
+ * vio_cmo - VIO bus accounting structure for CMO entitlement
+ *
+ * @lock: spinlock for entire structure
+ * @balance_q: work queue for balancing system entitlement
+ * @device_list: list of CMO-enabled devices requiring entitlement
+ * @entitled: total system entitlement in bytes
+ * @reserve: pool of memory from which devices reserve entitlement, incl. spare
+ * @excess: pool of excess entitlement not needed for device reserves or spare
+ * @spare: IO memory for device hotplug functionality
+ * @min: minimum necessary for system operation
+ * @desired: desired memory for system operation
+ * @curr: bytes currently allocated
+ * @high: high water mark for IO data usage
+ */
+struct vio_cmo {
+	spinlock_t lock;
+	struct delayed_work balance_q;
+	struct list_head device_list;
+	size_t entitled;
+	struct vio_cmo_pool reserve;
+	struct vio_cmo_pool excess;
+	size_t spare;
+	size_t min;
+	size_t desired;
+	size_t curr;
+	size_t high;
+} vio_cmo;
+
+/**
+ * vio_cmo_OF_devices - Count the number of OF devices that have DMA windows
+ */
+static int vio_cmo_num_OF_devs(void)
+{
+	struct device_node *node_vroot;
+	int count = 0;
+
+	/*
+	 * Count the number of vdevice entries with an
+	 * ibm,my-dma-window OF property
+	 */
+	node_vroot = of_find_node_by_name(NULL, "vdevice");
+	if (node_vroot) {
+		struct device_node *of_node;
+		struct property *prop;
+
+		for_each_child_of_node(node_vroot, of_node) {
+			prop = of_find_property(of_node, "ibm,my-dma-window",
+			                       NULL);
+			if (prop)
+				count++;
+		}
+	}
+	of_node_put(node_vroot);
+	return count;
+}
+
+/**
+ * vio_cmo_alloc - allocate IO memory for CMO-enable devices
+ *
+ * @viodev: VIO device requesting IO memory
+ * @size: size of allocation requested
+ *
+ * Allocations come from memory reserved for the devices and any excess
+ * IO memory available to all devices.  The spare pool used to service
+ * hotplug must be equal to %VIO_CMO_MIN_ENT for the excess pool to be
+ * made available.
+ *
+ * Return codes:
+ *  0 for successful allocation and -ENOMEM for a failure
+ */
+static inline int vio_cmo_alloc(struct vio_dev *viodev, size_t size)
+{
+	unsigned long flags;
+	size_t reserve_free = 0;
+	size_t excess_free = 0;
+	int ret = -ENOMEM;
+
+	spin_lock_irqsave(&vio_cmo.lock, flags);
+
+	/* Determine the amount of free entitlement available in reserve */
+	if (viodev->cmo.entitled > viodev->cmo.allocated)
+		reserve_free = viodev->cmo.entitled - viodev->cmo.allocated;
+
+	/* If spare is not fulfilled, the excess pool can not be used. */
+	if (vio_cmo.spare >= VIO_CMO_MIN_ENT)
+		excess_free = vio_cmo.excess.free;
+
+	/* The request can be satisfied */
+	if ((reserve_free + excess_free) >= size) {
+		vio_cmo.curr += size;
+		if (vio_cmo.curr > vio_cmo.high)
+			vio_cmo.high = vio_cmo.curr;
+		viodev->cmo.allocated += size;
+		size -= min(reserve_free, size);
+		vio_cmo.excess.free -= size;
+		ret = 0;
+	}
+
+	spin_unlock_irqrestore(&vio_cmo.lock, flags);
+	return ret;
+}
+
+/**
+ * vio_cmo_dealloc - deallocate IO memory from CMO-enable devices
+ * @viodev: VIO device freeing IO memory
+ * @size: size of deallocation
+ *
+ * IO memory is freed by the device back to the correct memory pools.
+ * The spare pool is replenished first from either memory pool, then
+ * the reserve pool is used to reduce device entitlement, the excess
+ * pool is used to increase the reserve pool toward the desired entitlement
+ * target, and then the remaining memory is returned to the pools.
+ *
+ */
+static inline void vio_cmo_dealloc(struct vio_dev *viodev, size_t size)
+{
+	unsigned long flags;
+	size_t spare_needed = 0;
+	size_t excess_freed = 0;
+	size_t reserve_freed = size;
+	size_t tmp;
+	int balance = 0;
+
+	spin_lock_irqsave(&vio_cmo.lock, flags);
+	vio_cmo.curr -= size;
+
+	/* Amount of memory freed from the excess pool */
+	if (viodev->cmo.allocated > viodev->cmo.entitled) {
+		excess_freed = min(reserve_freed, (viodev->cmo.allocated -
+		                                   viodev->cmo.entitled));
+		reserve_freed -= excess_freed;
+	}
+
+	/* Remove allocation from device */
+	viodev->cmo.allocated -= (reserve_freed + excess_freed);
+
+	/* Spare is a subset of the reserve pool, replenish it first. */
+	spare_needed = VIO_CMO_MIN_ENT - vio_cmo.spare;
+
+	/*
+	 * Replenish the spare in the reserve pool from the excess pool.
+	 * This moves entitlement into the reserve pool.
+	 */
+	if (spare_needed && excess_freed) {
+		tmp = min(excess_freed, spare_needed);
+		vio_cmo.excess.size -= tmp;
+		vio_cmo.reserve.size += tmp;
+		vio_cmo.spare += tmp;
+		excess_freed -= tmp;
+		spare_needed -= tmp;
+		balance = 1;
+	}
+
+	/*
+	 * Replenish the spare in the reserve pool from the reserve pool.
+	 * This removes entitlement from the device down to VIO_CMO_MIN_ENT,
+	 * if needed, and gives it to the spare pool. The amount of used
+	 * memory in this pool does not change.
+	 */
+	if (spare_needed && reserve_freed) {
+		tmp = min(spare_needed, min(reserve_freed,
+		                            (viodev->cmo.entitled -
+		                             VIO_CMO_MIN_ENT)));
+
+		vio_cmo.spare += tmp;
+		viodev->cmo.entitled -= tmp;
+		reserve_freed -= tmp;
+		spare_needed -= tmp;
+		balance = 1;
+	}
+
+	/*
+	 * Increase the reserve pool until the desired allocation is met.
+	 * Move an allocation freed from the excess pool into the reserve
+	 * pool and schedule a balance operation.
+	 */
+	if (excess_freed && (vio_cmo.desired > vio_cmo.reserve.size)) {
+		tmp = min(excess_freed, (vio_cmo.desired - vio_cmo.reserve.size));
+
+		vio_cmo.excess.size -= tmp;
+		vio_cmo.reserve.size += tmp;
+		excess_freed -= tmp;
+		balance = 1;
+	}
+
+	/* Return memory from the excess pool to that pool */
+	if (excess_freed)
+		vio_cmo.excess.free += excess_freed;
+
+	if (balance)
+		schedule_delayed_work(&vio_cmo.balance_q, VIO_CMO_BALANCE_DELAY);
+	spin_unlock_irqrestore(&vio_cmo.lock, flags);
+}
+
+/**
+ * vio_cmo_entitlement_update - Manage system entitlement changes
+ *
+ * @new_entitlement: new system entitlement to attempt to accommodate
+ *
+ * Increases in entitlement will be used to fulfill the spare entitlement
+ * and the rest is given to the excess pool.  Decreases, if they are
+ * possible, come from the excess pool and from unused device entitlement
+ *
+ * Returns: 0 on success, -ENOMEM when change can not be made
+ */
+int vio_cmo_entitlement_update(size_t new_entitlement)
+{
+	struct vio_dev *viodev;
+	struct vio_cmo_dev_entry *dev_ent;
+	unsigned long flags;
+	size_t avail, delta, tmp;
+
+	spin_lock_irqsave(&vio_cmo.lock, flags);
+
+	/* Entitlement increases */
+	if (new_entitlement > vio_cmo.entitled) {
+		delta = new_entitlement - vio_cmo.entitled;
+
+		/* Fulfill spare allocation */
+		if (vio_cmo.spare < VIO_CMO_MIN_ENT) {
+			tmp = min(delta, (VIO_CMO_MIN_ENT - vio_cmo.spare));
+			vio_cmo.spare += tmp;
+			vio_cmo.reserve.size += tmp;
+			delta -= tmp;
+		}
+
+		/* Remaining new allocation goes to the excess pool */
+		vio_cmo.entitled += delta;
+		vio_cmo.excess.size += delta;
+		vio_cmo.excess.free += delta;
+
+		goto out;
+	}
+
+	/* Entitlement decreases */
+	delta = vio_cmo.entitled - new_entitlement;
+	avail = vio_cmo.excess.free;
+
+	/*
+	 * Need to check how much unused entitlement each device can
+	 * sacrifice to fulfill entitlement change.
+	 */
+	list_for_each_entry(dev_ent, &vio_cmo.device_list, list) {
+		if (avail >= delta)
+			break;
+
+		viodev = dev_ent->viodev;
+		if ((viodev->cmo.entitled > viodev->cmo.allocated) &&
+		    (viodev->cmo.entitled > VIO_CMO_MIN_ENT))
+				avail += viodev->cmo.entitled -
+				         max_t(size_t, viodev->cmo.allocated,
+				               VIO_CMO_MIN_ENT);
+	}
+
+	if (delta <= avail) {
+		vio_cmo.entitled -= delta;
+
+		/* Take entitlement from the excess pool first */
+		tmp = min(vio_cmo.excess.free, delta);
+		vio_cmo.excess.size -= tmp;
+		vio_cmo.excess.free -= tmp;
+		delta -= tmp;
+
+		/*
+		 * Remove all but VIO_CMO_MIN_ENT bytes from devices
+		 * until entitlement change is served
+		 */
+		list_for_each_entry(dev_ent, &vio_cmo.device_list, list) {
+			if (!delta)
+				break;
+
+			viodev = dev_ent->viodev;
+			tmp = 0;
+			if ((viodev->cmo.entitled > viodev->cmo.allocated) &&
+			    (viodev->cmo.entitled > VIO_CMO_MIN_ENT))
+				tmp = viodev->cmo.entitled -
+				      max_t(size_t, viodev->cmo.allocated,
+				            VIO_CMO_MIN_ENT);
+			viodev->cmo.entitled -= min(tmp, delta);
+			delta -= min(tmp, delta);
+		}
+	} else {
+		spin_unlock_irqrestore(&vio_cmo.lock, flags);
+		return -ENOMEM;
+	}
+
+out:
+	schedule_delayed_work(&vio_cmo.balance_q, 0);
+	spin_unlock_irqrestore(&vio_cmo.lock, flags);
+	return 0;
+}
+
+/**
+ * vio_cmo_balance - Balance entitlement among devices
+ *
+ * @work: work queue structure for this operation
+ *
+ * Any system entitlement above the minimum needed for devices, or
+ * already allocated to devices, can be distributed to the devices.
+ * The list of devices is iterated through to recalculate the desired
+ * entitlement level and to determine how much entitlement above the
+ * minimum entitlement is allocated to devices.
+ *
+ * Small chunks of the available entitlement are given to devices until
+ * their requirements are fulfilled or there is no entitlement left to give.
+ * Upon completion sizes of the reserve and excess pools are calculated.
+ *
+ * The system minimum entitlement level is also recalculated here.
+ * Entitlement will be reserved for devices even after vio_bus_remove to
+ * accommodate reloading the driver.  The OF tree is walked to count the
+ * number of devices present and this will remove entitlement for devices
+ * that have actually left the system after having vio_bus_remove called.
+ */
+static void vio_cmo_balance(struct work_struct *work)
+{
+	struct vio_cmo *cmo;
+	struct vio_dev *viodev;
+	struct vio_cmo_dev_entry *dev_ent;
+	unsigned long flags;
+	size_t avail = 0, level, chunk, need;
+	int devcount = 0, fulfilled;
+
+	cmo = container_of(work, struct vio_cmo, balance_q.work);
+
+	spin_lock_irqsave(&vio_cmo.lock, flags);
+
+	/* Calculate minimum entitlement and fulfill spare */
+	cmo->min = vio_cmo_num_OF_devs() * VIO_CMO_MIN_ENT;
+	BUG_ON(cmo->min > cmo->entitled);
+	cmo->spare = min_t(size_t, VIO_CMO_MIN_ENT, (cmo->entitled - cmo->min));
+	cmo->min += cmo->spare;
+	cmo->desired = cmo->min;
+
+	/*
+	 * Determine how much entitlement is available and reset device
+	 * entitlements
+	 */
+	avail = cmo->entitled - cmo->spare;
+	list_for_each_entry(dev_ent, &vio_cmo.device_list, list) {
+		viodev = dev_ent->viodev;
+		devcount++;
+		viodev->cmo.entitled = VIO_CMO_MIN_ENT;
+		cmo->desired += (viodev->cmo.desired - VIO_CMO_MIN_ENT);
+		avail -= max_t(size_t, viodev->cmo.allocated, VIO_CMO_MIN_ENT);
+	}
+
+	/*
+	 * Having provided each device with the minimum entitlement, loop
+	 * over the devices portioning out the remaining entitlement
+	 * until there is nothing left.
+	 */
+	level = VIO_CMO_MIN_ENT;
+	while (avail) {
+		fulfilled = 0;
+		list_for_each_entry(dev_ent, &vio_cmo.device_list, list) {
+			viodev = dev_ent->viodev;
+
+			if (viodev->cmo.desired <= level) {
+				fulfilled++;
+				continue;
+			}
+
+			/*
+			 * Give the device up to VIO_CMO_BALANCE_CHUNK
+			 * bytes of entitlement, but do not exceed the
+			 * desired level of entitlement for the device.
+			 */
+			chunk = min_t(size_t, avail, VIO_CMO_BALANCE_CHUNK);
+			chunk = min(chunk, (viodev->cmo.desired -
+			                    viodev->cmo.entitled));
+			viodev->cmo.entitled += chunk;
+
+			/*
+			 * If the memory for this entitlement increase was
+			 * already allocated to the device it does not come
+			 * from the available pool being portioned out.
+			 */
+			need = max(viodev->cmo.allocated, viodev->cmo.entitled)-
+			       max(viodev->cmo.allocated, level);
+			avail -= need;
+
+		}
+		if (fulfilled == devcount)
+			break;
+		level += VIO_CMO_BALANCE_CHUNK;
+	}
+
+	/* Calculate new reserve and excess pool sizes */
+	cmo->reserve.size = cmo->min;
+	cmo->excess.free = 0;
+	cmo->excess.size = 0;
+	need = 0;
+	list_for_each_entry(dev_ent, &vio_cmo.device_list, list) {
+		viodev = dev_ent->viodev;
+		/* Calculated reserve size above the minimum entitlement */
+		if (viodev->cmo.entitled)
+			cmo->reserve.size += (viodev->cmo.entitled -
+			                      VIO_CMO_MIN_ENT);
+		/* Calculated used excess entitlement */
+		if (viodev->cmo.allocated > viodev->cmo.entitled)
+			need += viodev->cmo.allocated - viodev->cmo.entitled;
+	}
+	cmo->excess.size = cmo->entitled - cmo->reserve.size;
+	cmo->excess.free = cmo->excess.size - need;
+
+	cancel_delayed_work(container_of(work, struct delayed_work, work));
+	spin_unlock_irqrestore(&vio_cmo.lock, flags);
+}
+
+static void *vio_dma_iommu_alloc_coherent(struct device *dev, size_t size,
+                                          dma_addr_t *dma_handle, gfp_t flag)
+{
+	struct vio_dev *viodev = to_vio_dev(dev);
+	void *ret;
+
+	if (vio_cmo_alloc(viodev, roundup(size, IOMMU_PAGE_SIZE))) {
+		atomic_inc(&viodev->cmo.allocs_failed);
+		return NULL;
+	}
+
+	ret = dma_iommu_ops.alloc_coherent(dev, size, dma_handle, flag);
+	if (unlikely(ret == NULL)) {
+		vio_cmo_dealloc(viodev, roundup(size, IOMMU_PAGE_SIZE));
+		atomic_inc(&viodev->cmo.allocs_failed);
+	}
+
+	return ret;
+}
+
+static void vio_dma_iommu_free_coherent(struct device *dev, size_t size,
+                                        void *vaddr, dma_addr_t dma_handle)
+{
+	struct vio_dev *viodev = to_vio_dev(dev);
+
+	dma_iommu_ops.free_coherent(dev, size, vaddr, dma_handle);
+
+	vio_cmo_dealloc(viodev, roundup(size, IOMMU_PAGE_SIZE));
+}
+
+static dma_addr_t vio_dma_iommu_map_single(struct device *dev, void *vaddr,
+                                           size_t size,
+                                           enum dma_data_direction direction,
+                                           struct dma_attrs *attrs)
+{
+	struct vio_dev *viodev = to_vio_dev(dev);
+	dma_addr_t ret = DMA_ERROR_CODE;
+
+	if (vio_cmo_alloc(viodev, roundup(size, IOMMU_PAGE_SIZE))) {
+		atomic_inc(&viodev->cmo.allocs_failed);
+		return ret;
+	}
+
+	ret = dma_iommu_ops.map_single(dev, vaddr, size, direction, attrs);
+	if (unlikely(dma_mapping_error(dev, ret))) {
+		vio_cmo_dealloc(viodev, roundup(size, IOMMU_PAGE_SIZE));
+		atomic_inc(&viodev->cmo.allocs_failed);
+	}
+
+	return ret;
+}
+
+static void vio_dma_iommu_unmap_single(struct device *dev,
+		dma_addr_t dma_handle, size_t size,
+		enum dma_data_direction direction,
+		struct dma_attrs *attrs)
+{
+	struct vio_dev *viodev = to_vio_dev(dev);
+
+	dma_iommu_ops.unmap_single(dev, dma_handle, size, direction, attrs);
+
+	vio_cmo_dealloc(viodev, roundup(size, IOMMU_PAGE_SIZE));
+}
+
+static int vio_dma_iommu_map_sg(struct device *dev, struct scatterlist *sglist,
+                                int nelems, enum dma_data_direction direction,
+                                struct dma_attrs *attrs)
+{
+	struct vio_dev *viodev = to_vio_dev(dev);
+	struct scatterlist *sgl;
+	int ret, count = 0;
+	size_t alloc_size = 0;
+
+	for (sgl = sglist; count < nelems; count++, sgl++)
+		alloc_size += roundup(sgl->length, IOMMU_PAGE_SIZE);
+
+	if (vio_cmo_alloc(viodev, alloc_size)) {
+		atomic_inc(&viodev->cmo.allocs_failed);
+		return 0;
+	}
+
+	ret = dma_iommu_ops.map_sg(dev, sglist, nelems, direction, attrs);
+
+	if (unlikely(!ret)) {
+		vio_cmo_dealloc(viodev, alloc_size);
+		atomic_inc(&viodev->cmo.allocs_failed);
+	}
+
+	for (sgl = sglist, count = 0; count < ret; count++, sgl++)
+		alloc_size -= roundup(sgl->dma_length, IOMMU_PAGE_SIZE);
+	if (alloc_size)
+		vio_cmo_dealloc(viodev, alloc_size);
+
+	return ret;
+}
+
+static void vio_dma_iommu_unmap_sg(struct device *dev,
+		struct scatterlist *sglist, int nelems,
+		enum dma_data_direction direction,
+		struct dma_attrs *attrs)
+{
+	struct vio_dev *viodev = to_vio_dev(dev);
+	struct scatterlist *sgl;
+	size_t alloc_size = 0;
+	int count = 0;
+
+	for (sgl = sglist; count < nelems; count++, sgl++)
+		alloc_size += roundup(sgl->dma_length, IOMMU_PAGE_SIZE);
+
+	dma_iommu_ops.unmap_sg(dev, sglist, nelems, direction, attrs);
+
+	vio_cmo_dealloc(viodev, alloc_size);
+}
+
+struct dma_mapping_ops vio_dma_mapping_ops = {
+	.alloc_coherent = vio_dma_iommu_alloc_coherent,
+	.free_coherent  = vio_dma_iommu_free_coherent,
+	.map_single     = vio_dma_iommu_map_single,
+	.unmap_single   = vio_dma_iommu_unmap_single,
+	.map_sg         = vio_dma_iommu_map_sg,
+	.unmap_sg       = vio_dma_iommu_unmap_sg,
+};
+
+/**
+ * vio_cmo_set_dev_desired - Set desired entitlement for a device
+ *
+ * @viodev: struct vio_dev for device to alter
+ * @new_desired: new desired entitlement level in bytes
+ *
+ * For use by devices to request a change to their entitlement at runtime or
+ * through sysfs.  The desired entitlement level is changed and a balancing
+ * of system resources is scheduled to run in the future.
+ */
+void vio_cmo_set_dev_desired(struct vio_dev *viodev, size_t desired)
+{
+	unsigned long flags;
+	struct vio_cmo_dev_entry *dev_ent;
+	int found = 0;
+
+	if (!firmware_has_feature(FW_FEATURE_CMO))
+		return;
+
+	spin_lock_irqsave(&vio_cmo.lock, flags);
+	if (desired < VIO_CMO_MIN_ENT)
+		desired = VIO_CMO_MIN_ENT;
+
+	/*
+	 * Changes will not be made for devices not in the device list.
+	 * If it is not in the device list, then no driver is loaded
+	 * for the device and it can not receive entitlement.
+	 */
+	list_for_each_entry(dev_ent, &vio_cmo.device_list, list)
+		if (viodev == dev_ent->viodev) {
+			found = 1;
+			break;
+		}
+	if (!found)
+		return;
+
+	/* Increase/decrease in desired device entitlement */
+	if (desired >= viodev->cmo.desired) {
+		/* Just bump the bus and device values prior to a balance*/
+		vio_cmo.desired += desired - viodev->cmo.desired;
+		viodev->cmo.desired = desired;
+	} else {
+		/* Decrease bus and device values for desired entitlement */
+		vio_cmo.desired -= viodev->cmo.desired - desired;
+		viodev->cmo.desired = desired;
+		/*
+		 * If less entitlement is desired than current entitlement, move
+		 * any reserve memory in the change region to the excess pool.
+		 */
+		if (viodev->cmo.entitled > desired) {
+			vio_cmo.reserve.size -= viodev->cmo.entitled - desired;
+			vio_cmo.excess.size += viodev->cmo.entitled - desired;
+			/*
+			 * If entitlement moving from the reserve pool to the
+			 * excess pool is currently unused, add to the excess
+			 * free counter.
+			 */
+			if (viodev->cmo.allocated < viodev->cmo.entitled)
+				vio_cmo.excess.free += viodev->cmo.entitled -
+				                       max(viodev->cmo.allocated, desired);
+			viodev->cmo.entitled = desired;
+		}
+	}
+	schedule_delayed_work(&vio_cmo.balance_q, 0);
+	spin_unlock_irqrestore(&vio_cmo.lock, flags);
+}
+
+/**
+ * vio_cmo_bus_probe - Handle CMO specific bus probe activities
+ *
+ * @viodev - Pointer to struct vio_dev for device
+ *
+ * Determine the devices IO memory entitlement needs, attempting
+ * to satisfy the system minimum entitlement at first and scheduling
+ * a balance operation to take care of the rest at a later time.
+ *
+ * Returns: 0 on success, -EINVAL when device doesn't support CMO, and
+ *          -ENOMEM when entitlement is not available for device or
+ *          device entry.
+ *
+ */
+static int vio_cmo_bus_probe(struct vio_dev *viodev)
+{
+	struct vio_cmo_dev_entry *dev_ent;
+	struct device *dev = &viodev->dev;
+	struct vio_driver *viodrv = to_vio_driver(dev->driver);
+	unsigned long flags;
+	size_t size;
+
+	/*
+	 * Check to see that device has a DMA window and configure
+	 * entitlement for the device.
+	 */
+	if (of_get_property(viodev->dev.archdata.of_node,
+	                    "ibm,my-dma-window", NULL)) {
+		/* Check that the driver is CMO enabled and get desired DMA */
+		if (!viodrv->get_desired_dma) {
+			dev_err(dev, "%s: device driver does not support CMO\n",
+			        __func__);
+			return -EINVAL;
+		}
+
+		viodev->cmo.desired = IOMMU_PAGE_ALIGN(viodrv->get_desired_dma(viodev));
+		if (viodev->cmo.desired < VIO_CMO_MIN_ENT)
+			viodev->cmo.desired = VIO_CMO_MIN_ENT;
+		size = VIO_CMO_MIN_ENT;
+
+		dev_ent = kmalloc(sizeof(struct vio_cmo_dev_entry),
+		                  GFP_KERNEL);
+		if (!dev_ent)
+			return -ENOMEM;
+
+		dev_ent->viodev = viodev;
+		spin_lock_irqsave(&vio_cmo.lock, flags);
+		list_add(&dev_ent->list, &vio_cmo.device_list);
+	} else {
+		viodev->cmo.desired = 0;
+		size = 0;
+		spin_lock_irqsave(&vio_cmo.lock, flags);
+	}
+
+	/*
+	 * If the needs for vio_cmo.min have not changed since they
+	 * were last set, the number of devices in the OF tree has
+	 * been constant and the IO memory for this is already in
+	 * the reserve pool.
+	 */
+	if (vio_cmo.min == ((vio_cmo_num_OF_devs() + 1) *
+	                    VIO_CMO_MIN_ENT)) {
+		/* Updated desired entitlement if device requires it */
+		if (size)
+			vio_cmo.desired += (viodev->cmo.desired -
+		                        VIO_CMO_MIN_ENT);
+	} else {
+		size_t tmp;
+
+		tmp = vio_cmo.spare + vio_cmo.excess.free;
+		if (tmp < size) {
+			dev_err(dev, "%s: insufficient free "
+			        "entitlement to add device. "
+			        "Need %lu, have %lu\n", __func__,
+				size, (vio_cmo.spare + tmp));
+			spin_unlock_irqrestore(&vio_cmo.lock, flags);
+			return -ENOMEM;
+		}
+
+		/* Use excess pool first to fulfill request */
+		tmp = min(size, vio_cmo.excess.free);
+		vio_cmo.excess.free -= tmp;
+		vio_cmo.excess.size -= tmp;
+		vio_cmo.reserve.size += tmp;
+
+		/* Use spare if excess pool was insufficient */
+		vio_cmo.spare -= size - tmp;
+
+		/* Update bus accounting */
+		vio_cmo.min += size;
+		vio_cmo.desired += viodev->cmo.desired;
+	}
+	spin_unlock_irqrestore(&vio_cmo.lock, flags);
+	return 0;
+}
+
+/**
+ * vio_cmo_bus_remove - Handle CMO specific bus removal activities
+ *
+ * @viodev - Pointer to struct vio_dev for device
+ *
+ * Remove the device from the cmo device list.  The minimum entitlement
+ * will be reserved for the device as long as it is in the system.  The
+ * rest of the entitlement the device had been allocated will be returned
+ * to the system.
+ */
+static void vio_cmo_bus_remove(struct vio_dev *viodev)
+{
+	struct vio_cmo_dev_entry *dev_ent;
+	unsigned long flags;
+	size_t tmp;
+
+	spin_lock_irqsave(&vio_cmo.lock, flags);
+	if (viodev->cmo.allocated) {
+		dev_err(&viodev->dev, "%s: device had %lu bytes of IO "
+		        "allocated after remove operation.\n",
+		        __func__, viodev->cmo.allocated);
+		BUG();
+	}
+
+	/*
+	 * Remove the device from the device list being maintained for
+	 * CMO enabled devices.
+	 */
+	list_for_each_entry(dev_ent, &vio_cmo.device_list, list)
+		if (viodev == dev_ent->viodev) {
+			list_del(&dev_ent->list);
+			kfree(dev_ent);
+			break;
+		}
+
+	/*
+	 * Devices may not require any entitlement and they do not need
+	 * to be processed.  Otherwise, return the device's entitlement
+	 * back to the pools.
+	 */
+	if (viodev->cmo.entitled) {
+		/*
+		 * This device has not yet left the OF tree, it's
+		 * minimum entitlement remains in vio_cmo.min and
+		 * vio_cmo.desired
+		 */
+		vio_cmo.desired -= (viodev->cmo.desired - VIO_CMO_MIN_ENT);
+
+		/*
+		 * Save min allocation for device in reserve as long
+		 * as it exists in OF tree as determined by later
+		 * balance operation
+		 */
+		viodev->cmo.entitled -= VIO_CMO_MIN_ENT;
+
+		/* Replenish spare from freed reserve pool */
+		if (viodev->cmo.entitled && (vio_cmo.spare < VIO_CMO_MIN_ENT)) {
+			tmp = min(viodev->cmo.entitled, (VIO_CMO_MIN_ENT -
+			                                 vio_cmo.spare));
+			vio_cmo.spare += tmp;
+			viodev->cmo.entitled -= tmp;
+		}
+
+		/* Remaining reserve goes to excess pool */
+		vio_cmo.excess.size += viodev->cmo.entitled;
+		vio_cmo.excess.free += viodev->cmo.entitled;
+		vio_cmo.reserve.size -= viodev->cmo.entitled;
+
+		/*
+		 * Until the device is removed it will keep a
+		 * minimum entitlement; this will guarantee that
+		 * a module unload/load will result in a success.
+		 */
+		viodev->cmo.entitled = VIO_CMO_MIN_ENT;
+		viodev->cmo.desired = VIO_CMO_MIN_ENT;
+		atomic_set(&viodev->cmo.allocs_failed, 0);
+	}
+
+	spin_unlock_irqrestore(&vio_cmo.lock, flags);
+}
+
+static void vio_cmo_set_dma_ops(struct vio_dev *viodev)
+{
+	vio_dma_mapping_ops.dma_supported = dma_iommu_ops.dma_supported;
+	viodev->dev.archdata.dma_ops = &vio_dma_mapping_ops;
+}
+
+/**
+ * vio_cmo_bus_init - CMO entitlement initialization at bus init time
+ *
+ * Set up the reserve and excess entitlement pools based on available
+ * system entitlement and the number of devices in the OF tree that
+ * require entitlement in the reserve pool.
+ */
+static void vio_cmo_bus_init(void)
+{
+	struct hvcall_mpp_data mpp_data;
+	int err;
+
+	memset(&vio_cmo, 0, sizeof(struct vio_cmo));
+	spin_lock_init(&vio_cmo.lock);
+	INIT_LIST_HEAD(&vio_cmo.device_list);
+	INIT_DELAYED_WORK(&vio_cmo.balance_q, vio_cmo_balance);
+
+	/* Get current system entitlement */
+	err = h_get_mpp(&mpp_data);
+
+	/*
+	 * On failure, continue with entitlement set to 0, will panic()
+	 * later when spare is reserved.
+	 */
+	if (err != H_SUCCESS) {
+		printk(KERN_ERR "%s: unable to determine system IO "\
+		       "entitlement. (%d)\n", __func__, err);
+		vio_cmo.entitled = 0;
+	} else {
+		vio_cmo.entitled = mpp_data.entitled_mem;
+	}
+
+	/* Set reservation and check against entitlement */
+	vio_cmo.spare = VIO_CMO_MIN_ENT;
+	vio_cmo.reserve.size = vio_cmo.spare;
+	vio_cmo.reserve.size += (vio_cmo_num_OF_devs() *
+	                         VIO_CMO_MIN_ENT);
+	if (vio_cmo.reserve.size > vio_cmo.entitled) {
+		printk(KERN_ERR "%s: insufficient system entitlement\n",
+		       __func__);
+		panic("%s: Insufficient system entitlement", __func__);
+	}
+
+	/* Set the remaining accounting variables */
+	vio_cmo.excess.size = vio_cmo.entitled - vio_cmo.reserve.size;
+	vio_cmo.excess.free = vio_cmo.excess.size;
+	vio_cmo.min = vio_cmo.reserve.size;
+	vio_cmo.desired = vio_cmo.reserve.size;
+}
+
+/* sysfs device functions and data structures for CMO */
+
+#define viodev_cmo_rd_attr(name)                                        \
+static ssize_t viodev_cmo_##name##_show(struct device *dev,             \
+                                        struct device_attribute *attr,  \
+                                         char *buf)                     \
+{                                                                       \
+	return sprintf(buf, "%lu\n", to_vio_dev(dev)->cmo.name);        \
+}
+
+static ssize_t viodev_cmo_allocs_failed_show(struct device *dev,
+		struct device_attribute *attr, char *buf)
+{
+	struct vio_dev *viodev = to_vio_dev(dev);
+	return sprintf(buf, "%d\n", atomic_read(&viodev->cmo.allocs_failed));
+}
+
+static ssize_t viodev_cmo_allocs_failed_reset(struct device *dev,
+		struct device_attribute *attr, const char *buf, size_t count)
+{
+	struct vio_dev *viodev = to_vio_dev(dev);
+	atomic_set(&viodev->cmo.allocs_failed, 0);
+	return count;
+}
+
+static ssize_t viodev_cmo_desired_set(struct device *dev,
+		struct device_attribute *attr, const char *buf, size_t count)
+{
+	struct vio_dev *viodev = to_vio_dev(dev);
+	size_t new_desired;
+	int ret;
+
+	ret = strict_strtoul(buf, 10, &new_desired);
+	if (ret)
+		return ret;
+
+	vio_cmo_set_dev_desired(viodev, new_desired);
+	return count;
+}
+
+viodev_cmo_rd_attr(desired);
+viodev_cmo_rd_attr(entitled);
+viodev_cmo_rd_attr(allocated);
+
+static ssize_t name_show(struct device *, struct device_attribute *, char *);
+static ssize_t devspec_show(struct device *, struct device_attribute *, char *);
+static struct device_attribute vio_cmo_dev_attrs[] = {
+	__ATTR_RO(name),
+	__ATTR_RO(devspec),
+	__ATTR(cmo_desired,       S_IWUSR|S_IRUSR|S_IWGRP|S_IRGRP|S_IROTH,
+	       viodev_cmo_desired_show, viodev_cmo_desired_set),
+	__ATTR(cmo_entitled,      S_IRUGO, viodev_cmo_entitled_show,      NULL),
+	__ATTR(cmo_allocated,     S_IRUGO, viodev_cmo_allocated_show,     NULL),
+	__ATTR(cmo_allocs_failed, S_IWUSR|S_IRUSR|S_IWGRP|S_IRGRP|S_IROTH,
+	       viodev_cmo_allocs_failed_show, viodev_cmo_allocs_failed_reset),
+	__ATTR_NULL
+};
+
+/* sysfs bus functions and data structures for CMO */
+
+#define viobus_cmo_rd_attr(name)                                        \
+static ssize_t                                                          \
+viobus_cmo_##name##_show(struct bus_type *bt, char *buf)                \
+{                                                                       \
+	return sprintf(buf, "%lu\n", vio_cmo.name);                     \
+}
+
+#define viobus_cmo_pool_rd_attr(name, var)                              \
+static ssize_t                                                          \
+viobus_cmo_##name##_pool_show_##var(struct bus_type *bt, char *buf)     \
+{                                                                       \
+	return sprintf(buf, "%lu\n", vio_cmo.name.var);                 \
+}
+
+static ssize_t viobus_cmo_high_reset(struct bus_type *bt, const char *buf,
+                                     size_t count)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&vio_cmo.lock, flags);
+	vio_cmo.high = vio_cmo.curr;
+	spin_unlock_irqrestore(&vio_cmo.lock, flags);
+
+	return count;
+}
+
+viobus_cmo_rd_attr(entitled);
+viobus_cmo_pool_rd_attr(reserve, size);
+viobus_cmo_pool_rd_attr(excess, size);
+viobus_cmo_pool_rd_attr(excess, free);
+viobus_cmo_rd_attr(spare);
+viobus_cmo_rd_attr(min);
+viobus_cmo_rd_attr(desired);
+viobus_cmo_rd_attr(curr);
+viobus_cmo_rd_attr(high);
+
+static struct bus_attribute vio_cmo_bus_attrs[] = {
+	__ATTR(cmo_entitled, S_IRUGO, viobus_cmo_entitled_show, NULL),
+	__ATTR(cmo_reserve_size, S_IRUGO, viobus_cmo_reserve_pool_show_size, NULL),
+	__ATTR(cmo_excess_size, S_IRUGO, viobus_cmo_excess_pool_show_size, NULL),
+	__ATTR(cmo_excess_free, S_IRUGO, viobus_cmo_excess_pool_show_free, NULL),
+	__ATTR(cmo_spare,   S_IRUGO, viobus_cmo_spare_show,   NULL),
+	__ATTR(cmo_min,     S_IRUGO, viobus_cmo_min_show,     NULL),
+	__ATTR(cmo_desired, S_IRUGO, viobus_cmo_desired_show, NULL),
+	__ATTR(cmo_curr,    S_IRUGO, viobus_cmo_curr_show,    NULL),
+	__ATTR(cmo_high,    S_IWUSR|S_IRUSR|S_IWGRP|S_IRGRP|S_IROTH,
+	       viobus_cmo_high_show, viobus_cmo_high_reset),
+	__ATTR_NULL
+};
+
+static void vio_cmo_sysfs_init(void)
+{
+	vio_bus_type.dev_attrs = vio_cmo_dev_attrs;
+	vio_bus_type.bus_attrs = vio_cmo_bus_attrs;
+}
+#else /* CONFIG_PPC_SMLPAR */
+/* Dummy functions for iSeries platform */
+int vio_cmo_entitlement_update(size_t new_entitlement) { return 0; }
+void vio_cmo_set_dev_desired(struct vio_dev *viodev, size_t desired) {}
+static int vio_cmo_bus_probe(struct vio_dev *viodev) { return 0; }
+static void vio_cmo_bus_remove(struct vio_dev *viodev) {}
+static void vio_cmo_set_dma_ops(struct vio_dev *viodev) {}
+static void vio_cmo_bus_init(void) {}
+static void vio_cmo_sysfs_init(void) { }
+#endif /* CONFIG_PPC_SMLPAR */
+EXPORT_SYMBOL(vio_cmo_entitlement_update);
+EXPORT_SYMBOL(vio_cmo_set_dev_desired);
+
 static struct iommu_table *vio_build_iommu_table(struct vio_dev *dev)
 {
 	const unsigned char *dma_window;
@@ -114,8 +1105,17 @@ static int vio_bus_probe(struct device *dev)
 		return error;
 
 	id = vio_match_device(viodrv->id_table, viodev);
-	if (id)
+	if (id) {
+		memset(&viodev->cmo, 0, sizeof(viodev->cmo));
+		if (firmware_has_feature(FW_FEATURE_CMO)) {
+			error = vio_cmo_bus_probe(viodev);
+			if (error)
+				return error;
+		}
 		error = viodrv->probe(viodev, id);
+		if (error && firmware_has_feature(FW_FEATURE_CMO))
+			vio_cmo_bus_remove(viodev);
+	}
 
 	return error;
 }
@@ -125,12 +1125,23 @@ static int vio_bus_remove(struct device *dev)
 {
 	struct vio_dev *viodev = to_vio_dev(dev);
 	struct vio_driver *viodrv = to_vio_driver(dev->driver);
+	struct device *devptr;
+	int ret = 1;
+
+	/*
+	 * Hold a reference to the device after the remove function is called
+	 * to allow for CMO accounting cleanup for the device.
+	 */
+	devptr = get_device(dev);
 
 	if (viodrv->remove)
-		return viodrv->remove(viodev);
+		ret = viodrv->remove(viodev);
+
+	if (!ret && firmware_has_feature(FW_FEATURE_CMO))
+		vio_cmo_bus_remove(viodev);
 
-	/* driver can't remove */
-	return 1;
+	put_device(devptr);
+	return ret;
 }
 
 /**
@@ -215,7 +1226,11 @@ struct vio_dev *vio_register_device_node(struct device_node *of_node)
 			viodev->unit_address = *unit_address;
 	}
 	viodev->dev.archdata.of_node = of_node_get(of_node);
-	viodev->dev.archdata.dma_ops = &dma_iommu_ops;
+
+	if (firmware_has_feature(FW_FEATURE_CMO))
+		vio_cmo_set_dma_ops(viodev);
+	else
+		viodev->dev.archdata.dma_ops = &dma_iommu_ops;
 	viodev->dev.archdata.dma_data = vio_build_iommu_table(viodev);
 	viodev->dev.archdata.numa_node = of_node_to_nid(of_node);
 
@@ -245,6 +1260,9 @@ static int __init vio_bus_init(void)
 	int err;
 	struct device_node *node_vroot;
 
+	if (firmware_has_feature(FW_FEATURE_CMO))
+		vio_cmo_sysfs_init();
+
 	err = bus_register(&vio_bus_type);
 	if (err) {
 		printk(KERN_ERR "failed to register VIO bus\n");
@@ -262,6 +1280,9 @@ static int __init vio_bus_init(void)
 		return err;
 	}
 
+	if (firmware_has_feature(FW_FEATURE_CMO))
+		vio_cmo_bus_init();
+
 	node_vroot = of_find_node_by_name(NULL, "vdevice");
 	if (node_vroot) {
 		struct device_node *of_node;
diff --git a/arch/powerpc/kernel/vmlinux.lds.S b/arch/powerpc/kernel/vmlinux.lds.S
index a914411bced5..9f6c1ca1739e 100644
--- a/arch/powerpc/kernel/vmlinux.lds.S
+++ b/arch/powerpc/kernel/vmlinux.lds.S
@@ -66,11 +66,12 @@ SECTIONS
 		__got2_end = .;
 #endif /* CONFIG_PPC32 */
 
-		. = ALIGN(PAGE_SIZE);
-		_etext = .;
-		PROVIDE32 (etext = .);
 	} :kernel
 
+	. = ALIGN(PAGE_SIZE);
+	_etext = .;
+	PROVIDE32 (etext = .);
+
 	/* Read-only data */
 	RODATA
 
@@ -85,7 +86,7 @@ SECTIONS
 
 	/* The dummy segment contents for the bug workaround mentioned above
 	   near PHDRS.  */
-	.dummy : {
+	.dummy : AT(ADDR(.dummy) - LOAD_OFFSET) {
 		LONG(0xf177)
 	} :kernel :dummy
 
diff --git a/arch/powerpc/kvm/44x_tlb.c b/arch/powerpc/kvm/44x_tlb.c
index 75dff7cfa814..5a5602da5091 100644
--- a/arch/powerpc/kvm/44x_tlb.c
+++ b/arch/powerpc/kvm/44x_tlb.c
@@ -177,7 +177,8 @@ void kvmppc_mmu_map(struct kvm_vcpu *vcpu, u64 gvaddr, gfn_t gfn, u64 asid,
 	                                            vcpu->arch.msr & MSR_PR);
 }
 
-void kvmppc_mmu_invalidate(struct kvm_vcpu *vcpu, u64 eaddr, u64 asid)
+void kvmppc_mmu_invalidate(struct kvm_vcpu *vcpu, gva_t eaddr,
+                           gva_t eend, u32 asid)
 {
 	unsigned int pid = asid & 0xff;
 	int i;
@@ -191,7 +192,7 @@ void kvmppc_mmu_invalidate(struct kvm_vcpu *vcpu, u64 eaddr, u64 asid)
 		if (!get_tlb_v(stlbe))
 			continue;
 
-		if (eaddr < get_tlb_eaddr(stlbe))
+		if (eend < get_tlb_eaddr(stlbe))
 			continue;
 
 		if (eaddr > get_tlb_end(stlbe))
diff --git a/arch/powerpc/kvm/emulate.c b/arch/powerpc/kvm/emulate.c
index 000097461283..8c605d0a5488 100644
--- a/arch/powerpc/kvm/emulate.c
+++ b/arch/powerpc/kvm/emulate.c
@@ -137,7 +137,7 @@ static int kvmppc_emul_tlbwe(struct kvm_vcpu *vcpu, u32 inst)
 	if (tlbe->word0 & PPC44x_TLB_VALID) {
 		eaddr = get_tlb_eaddr(tlbe);
 		asid = (tlbe->word0 & PPC44x_TLB_TS) | tlbe->tid;
-		kvmppc_mmu_invalidate(vcpu, eaddr, asid);
+		kvmppc_mmu_invalidate(vcpu, eaddr, get_tlb_end(tlbe), asid);
 	}
 
 	switch (ws) {
diff --git a/arch/powerpc/lib/Makefile b/arch/powerpc/lib/Makefile
index 2a88e8b9a3c6..d69912c07ce7 100644
--- a/arch/powerpc/lib/Makefile
+++ b/arch/powerpc/lib/Makefile
@@ -6,12 +6,10 @@ ifeq ($(CONFIG_PPC64),y)
 EXTRA_CFLAGS		+= -mno-minimal-toc
 endif
 
-ifeq ($(CONFIG_PPC_MERGE),y)
 obj-y			:= string.o alloc.o \
 			   checksum_$(CONFIG_WORD_SIZE).o
 obj-$(CONFIG_PPC32)	+= div64.o copy_32.o crtsavres.o
 obj-$(CONFIG_HAS_IOMEM)	+= devres.o
-endif
 
 obj-$(CONFIG_PPC64)	+= copypage_64.o copyuser_64.o \
 			   memcpy_64.o usercopy_64.o mem_64.o string.o
diff --git a/arch/powerpc/mm/Makefile b/arch/powerpc/mm/Makefile
index 1c00e0196f6c..e7392b45a5ef 100644
--- a/arch/powerpc/mm/Makefile
+++ b/arch/powerpc/mm/Makefile
@@ -12,7 +12,8 @@ obj-y				:= fault.o mem.o \
 				   mmu_context_$(CONFIG_WORD_SIZE).o
 hash-$(CONFIG_PPC_NATIVE)	:= hash_native_64.o
 obj-$(CONFIG_PPC64)		+= hash_utils_64.o \
-				   slb_low.o slb.o stab.o mmap.o $(hash-y)
+				   slb_low.o slb.o stab.o \
+				   gup.o mmap.o $(hash-y)
 obj-$(CONFIG_PPC_STD_MMU_32)	+= ppc_mmu_32.o
 obj-$(CONFIG_PPC_STD_MMU)	+= hash_low_$(CONFIG_WORD_SIZE).o \
 				   tlb_$(CONFIG_WORD_SIZE).o
diff --git a/arch/powerpc/mm/fault.c b/arch/powerpc/mm/fault.c
index 1707d00331fc..565b7a237c84 100644
--- a/arch/powerpc/mm/fault.c
+++ b/arch/powerpc/mm/fault.c
@@ -100,31 +100,6 @@ static int store_updates_sp(struct pt_regs *regs)
 	return 0;
 }
 
-#if !(defined(CONFIG_4xx) || defined(CONFIG_BOOKE))
-static void do_dabr(struct pt_regs *regs, unsigned long address,
-		    unsigned long error_code)
-{
-	siginfo_t info;
-
-	if (notify_die(DIE_DABR_MATCH, "dabr_match", regs, error_code,
-			11, SIGSEGV) == NOTIFY_STOP)
-		return;
-
-	if (debugger_dabr_match(regs))
-		return;
-
-	/* Clear the DABR */
-	set_dabr(0);
-
-	/* Deliver the signal to userspace */
-	info.si_signo = SIGTRAP;
-	info.si_errno = 0;
-	info.si_code = TRAP_HWBKPT;
-	info.si_addr = (void __user *)address;
-	force_sig_info(SIGTRAP, &info, current);
-}
-#endif /* !(CONFIG_4xx || CONFIG_BOOKE)*/
-
 /*
  * For 600- and 800-family processors, the error_code parameter is DSISR
  * for a data fault, SRR1 for an instruction fault. For 400-family processors
diff --git a/arch/powerpc/mm/gup.c b/arch/powerpc/mm/gup.c
new file mode 100644
index 000000000000..9fdf4d6335e4
--- /dev/null
+++ b/arch/powerpc/mm/gup.c
@@ -0,0 +1,280 @@
+/*
+ * Lockless get_user_pages_fast for powerpc
+ *
+ * Copyright (C) 2008 Nick Piggin
+ * Copyright (C) 2008 Novell Inc.
+ */
+#undef DEBUG
+
+#include <linux/sched.h>
+#include <linux/mm.h>
+#include <linux/hugetlb.h>
+#include <linux/vmstat.h>
+#include <linux/pagemap.h>
+#include <linux/rwsem.h>
+#include <asm/pgtable.h>
+
+/*
+ * The performance critical leaf functions are made noinline otherwise gcc
+ * inlines everything into a single function which results in too much
+ * register pressure.
+ */
+static noinline int gup_pte_range(pmd_t pmd, unsigned long addr,
+		unsigned long end, int write, struct page **pages, int *nr)
+{
+	unsigned long mask, result;
+	pte_t *ptep;
+
+	result = _PAGE_PRESENT|_PAGE_USER;
+	if (write)
+		result |= _PAGE_RW;
+	mask = result | _PAGE_SPECIAL;
+
+	ptep = pte_offset_kernel(&pmd, addr);
+	do {
+		pte_t pte = *ptep;
+		struct page *page;
+
+		if ((pte_val(pte) & mask) != result)
+			return 0;
+		VM_BUG_ON(!pfn_valid(pte_pfn(pte)));
+		page = pte_page(pte);
+		if (!page_cache_get_speculative(page))
+			return 0;
+		if (unlikely(pte != *ptep)) {
+			put_page(page);
+			return 0;
+		}
+		pages[*nr] = page;
+		(*nr)++;
+
+	} while (ptep++, addr += PAGE_SIZE, addr != end);
+
+	return 1;
+}
+
+#ifdef CONFIG_HUGETLB_PAGE
+static noinline int gup_huge_pte(pte_t *ptep, struct hstate *hstate,
+				 unsigned long *addr, unsigned long end,
+				 int write, struct page **pages, int *nr)
+{
+	unsigned long mask;
+	unsigned long pte_end;
+	struct page *head, *page;
+	pte_t pte;
+	int refs;
+
+	pte_end = (*addr + huge_page_size(hstate)) & huge_page_mask(hstate);
+	if (pte_end < end)
+		end = pte_end;
+
+	pte = *ptep;
+	mask = _PAGE_PRESENT|_PAGE_USER;
+	if (write)
+		mask |= _PAGE_RW;
+	if ((pte_val(pte) & mask) != mask)
+		return 0;
+	/* hugepages are never "special" */
+	VM_BUG_ON(!pfn_valid(pte_pfn(pte)));
+
+	refs = 0;
+	head = pte_page(pte);
+	page = head + ((*addr & ~huge_page_mask(hstate)) >> PAGE_SHIFT);
+	do {
+		VM_BUG_ON(compound_head(page) != head);
+		pages[*nr] = page;
+		(*nr)++;
+		page++;
+		refs++;
+	} while (*addr += PAGE_SIZE, *addr != end);
+
+	if (!page_cache_add_speculative(head, refs)) {
+		*nr -= refs;
+		return 0;
+	}
+	if (unlikely(pte != *ptep)) {
+		/* Could be optimized better */
+		while (*nr) {
+			put_page(page);
+			(*nr)--;
+		}
+	}
+
+	return 1;
+}
+#endif /* CONFIG_HUGETLB_PAGE */
+
+static int gup_pmd_range(pud_t pud, unsigned long addr, unsigned long end,
+		int write, struct page **pages, int *nr)
+{
+	unsigned long next;
+	pmd_t *pmdp;
+
+	pmdp = pmd_offset(&pud, addr);
+	do {
+		pmd_t pmd = *pmdp;
+
+		next = pmd_addr_end(addr, end);
+		if (pmd_none(pmd))
+			return 0;
+		if (!gup_pte_range(pmd, addr, next, write, pages, nr))
+			return 0;
+	} while (pmdp++, addr = next, addr != end);
+
+	return 1;
+}
+
+static int gup_pud_range(pgd_t pgd, unsigned long addr, unsigned long end,
+		int write, struct page **pages, int *nr)
+{
+	unsigned long next;
+	pud_t *pudp;
+
+	pudp = pud_offset(&pgd, addr);
+	do {
+		pud_t pud = *pudp;
+
+		next = pud_addr_end(addr, end);
+		if (pud_none(pud))
+			return 0;
+		if (!gup_pmd_range(pud, addr, next, write, pages, nr))
+			return 0;
+	} while (pudp++, addr = next, addr != end);
+
+	return 1;
+}
+
+int get_user_pages_fast(unsigned long start, int nr_pages, int write,
+			struct page **pages)
+{
+	struct mm_struct *mm = current->mm;
+	unsigned long addr, len, end;
+	unsigned long next;
+	pgd_t *pgdp;
+	int psize, nr = 0;
+	unsigned int shift;
+
+	pr_debug("%s(%lx,%x,%s)\n", __func__, start, nr_pages, write ? "write" : "read");
+
+	start &= PAGE_MASK;
+	addr = start;
+	len = (unsigned long) nr_pages << PAGE_SHIFT;
+	end = start + len;
+
+	if (unlikely(!access_ok(write ? VERIFY_WRITE : VERIFY_READ,
+					start, len)))
+		goto slow_irqon;
+
+	pr_debug("  aligned: %lx .. %lx\n", start, end);
+
+#ifdef CONFIG_HUGETLB_PAGE
+	/* We bail out on slice boundary crossing when hugetlb is
+	 * enabled in order to not have to deal with two different
+	 * page table formats
+	 */
+	if (addr < SLICE_LOW_TOP) {
+		if (end > SLICE_LOW_TOP)
+			goto slow_irqon;
+
+		if (unlikely(GET_LOW_SLICE_INDEX(addr) !=
+			     GET_LOW_SLICE_INDEX(end - 1)))
+			goto slow_irqon;
+	} else {
+		if (unlikely(GET_HIGH_SLICE_INDEX(addr) !=
+			     GET_HIGH_SLICE_INDEX(end - 1)))
+			goto slow_irqon;
+	}
+#endif /* CONFIG_HUGETLB_PAGE */
+
+	/*
+	 * XXX: batch / limit 'nr', to avoid large irq off latency
+	 * needs some instrumenting to determine the common sizes used by
+	 * important workloads (eg. DB2), and whether limiting the batch size
+	 * will decrease performance.
+	 *
+	 * It seems like we're in the clear for the moment. Direct-IO is
+	 * the main guy that batches up lots of get_user_pages, and even
+	 * they are limited to 64-at-a-time which is not so many.
+	 */
+	/*
+	 * This doesn't prevent pagetable teardown, but does prevent
+	 * the pagetables from being freed on powerpc.
+	 *
+	 * So long as we atomically load page table pointers versus teardown,
+	 * we can follow the address down to the the page and take a ref on it.
+	 */
+	local_irq_disable();
+
+	psize = get_slice_psize(mm, addr);
+	shift = mmu_psize_defs[psize].shift;
+
+#ifdef CONFIG_HUGETLB_PAGE
+	if (unlikely(mmu_huge_psizes[psize])) {
+		pte_t *ptep;
+		unsigned long a = addr;
+		unsigned long sz = ((1UL) << shift);
+		struct hstate *hstate = size_to_hstate(sz);
+
+		BUG_ON(!hstate);
+		/*
+		 * XXX: could be optimized to avoid hstate
+		 * lookup entirely (just use shift)
+		 */
+
+		do {
+			VM_BUG_ON(shift != mmu_psize_defs[get_slice_psize(mm, a)].shift);
+			ptep = huge_pte_offset(mm, a);
+			pr_debug(" %016lx: huge ptep %p\n", a, ptep);
+			if (!ptep || !gup_huge_pte(ptep, hstate, &a, end, write, pages,
+						   &nr))
+				goto slow;
+		} while (a != end);
+	} else
+#endif /* CONFIG_HUGETLB_PAGE */
+	{
+		pgdp = pgd_offset(mm, addr);
+		do {
+			pgd_t pgd = *pgdp;
+
+			VM_BUG_ON(shift != mmu_psize_defs[get_slice_psize(mm, addr)].shift);
+			pr_debug("  %016lx: normal pgd %p\n", addr, (void *)pgd);
+			next = pgd_addr_end(addr, end);
+			if (pgd_none(pgd))
+				goto slow;
+			if (!gup_pud_range(pgd, addr, next, write, pages, &nr))
+				goto slow;
+		} while (pgdp++, addr = next, addr != end);
+	}
+	local_irq_enable();
+
+	VM_BUG_ON(nr != (end - start) >> PAGE_SHIFT);
+	return nr;
+
+	{
+		int ret;
+
+slow:
+		local_irq_enable();
+slow_irqon:
+		pr_debug("  slow path ! nr = %d\n", nr);
+
+		/* Try to get the remaining pages with get_user_pages */
+		start += nr << PAGE_SHIFT;
+		pages += nr;
+
+		down_read(&mm->mmap_sem);
+		ret = get_user_pages(current, mm, start,
+			(end - start) >> PAGE_SHIFT, write, 0, pages, NULL);
+		up_read(&mm->mmap_sem);
+
+		/* Have to be a bit careful with return values */
+		if (nr > 0) {
+			if (ret < 0)
+				ret = nr;
+			else
+				ret += nr;
+		}
+
+		return ret;
+	}
+}
diff --git a/arch/powerpc/mm/hash_utils_64.c b/arch/powerpc/mm/hash_utils_64.c
index 5ce5a4dcd008..8920eea34528 100644
--- a/arch/powerpc/mm/hash_utils_64.c
+++ b/arch/powerpc/mm/hash_utils_64.c
@@ -151,39 +151,58 @@ static struct mmu_psize_def mmu_psize_defaults_gp[] = {
 	},
 };
 
+static unsigned long htab_convert_pte_flags(unsigned long pteflags)
+{
+	unsigned long rflags = pteflags & 0x1fa;
+
+	/* _PAGE_EXEC -> NOEXEC */
+	if ((pteflags & _PAGE_EXEC) == 0)
+		rflags |= HPTE_R_N;
+
+	/* PP bits. PAGE_USER is already PP bit 0x2, so we only
+	 * need to add in 0x1 if it's a read-only user page
+	 */
+	if ((pteflags & _PAGE_USER) && !((pteflags & _PAGE_RW) &&
+					 (pteflags & _PAGE_DIRTY)))
+		rflags |= 1;
+
+	/* Always add C */
+	return rflags | HPTE_R_C;
+}
 
 int htab_bolt_mapping(unsigned long vstart, unsigned long vend,
-		      unsigned long pstart, unsigned long mode,
+		      unsigned long pstart, unsigned long prot,
 		      int psize, int ssize)
 {
 	unsigned long vaddr, paddr;
 	unsigned int step, shift;
-	unsigned long tmp_mode;
 	int ret = 0;
 
 	shift = mmu_psize_defs[psize].shift;
 	step = 1 << shift;
 
+	prot = htab_convert_pte_flags(prot);
+
+	DBG("htab_bolt_mapping(%lx..%lx -> %lx (%lx,%d,%d)\n",
+	    vstart, vend, pstart, prot, psize, ssize);
+
 	for (vaddr = vstart, paddr = pstart; vaddr < vend;
 	     vaddr += step, paddr += step) {
 		unsigned long hash, hpteg;
 		unsigned long vsid = get_kernel_vsid(vaddr, ssize);
 		unsigned long va = hpt_va(vaddr, vsid, ssize);
+		unsigned long tprot = prot;
 
-		tmp_mode = mode;
-		
-		/* Make non-kernel text non-executable */
-		if (!in_kernel_text(vaddr))
-			tmp_mode = mode | HPTE_R_N;
+		/* Make kernel text executable */
+		if (in_kernel_text(vaddr))
+			tprot &= ~HPTE_R_N;
 
 		hash = hpt_hash(va, shift, ssize);
 		hpteg = ((hash & htab_hash_mask) * HPTES_PER_GROUP);
 
-		DBG("htab_bolt_mapping: calling %p\n", ppc_md.hpte_insert);
-
 		BUG_ON(!ppc_md.hpte_insert);
-		ret = ppc_md.hpte_insert(hpteg, va, paddr,
-				tmp_mode, HPTE_V_BOLTED, psize, ssize);
+		ret = ppc_md.hpte_insert(hpteg, va, paddr, tprot,
+					 HPTE_V_BOLTED, psize, ssize);
 
 		if (ret < 0)
 			break;
@@ -519,9 +538,9 @@ static unsigned long __init htab_get_table_size(void)
 #ifdef CONFIG_MEMORY_HOTPLUG
 void create_section_mapping(unsigned long start, unsigned long end)
 {
-		BUG_ON(htab_bolt_mapping(start, end, __pa(start),
-			_PAGE_ACCESSED | _PAGE_DIRTY | _PAGE_COHERENT | PP_RWXX,
-			mmu_linear_psize, mmu_kernel_ssize));
+	BUG_ON(htab_bolt_mapping(start, end, __pa(start),
+				 PAGE_KERNEL, mmu_linear_psize,
+				 mmu_kernel_ssize));
 }
 
 int remove_section_mapping(unsigned long start, unsigned long end)
@@ -570,7 +589,7 @@ void __init htab_initialize(void)
 {
 	unsigned long table;
 	unsigned long pteg_count;
-	unsigned long mode_rw;
+	unsigned long prot;
 	unsigned long base = 0, size = 0, limit;
 	int i;
 
@@ -628,7 +647,7 @@ void __init htab_initialize(void)
 		mtspr(SPRN_SDR1, _SDR1);
 	}
 
-	mode_rw = _PAGE_ACCESSED | _PAGE_DIRTY | _PAGE_COHERENT | PP_RWXX;
+	prot = PAGE_KERNEL;
 
 #ifdef CONFIG_DEBUG_PAGEALLOC
 	linear_map_hash_count = lmb_end_of_DRAM() >> PAGE_SHIFT;
@@ -647,7 +666,8 @@ void __init htab_initialize(void)
 		base = (unsigned long)__va(lmb.memory.region[i].base);
 		size = lmb.memory.region[i].size;
 
-		DBG("creating mapping for region: %lx : %lx\n", base, size);
+		DBG("creating mapping for region: %lx..%lx (prot: %x)\n",
+		    base, size, prot);
 
 #ifdef CONFIG_U3_DART
 		/* Do not map the DART space. Fortunately, it will be aligned
@@ -664,21 +684,21 @@ void __init htab_initialize(void)
 			unsigned long dart_table_end = dart_tablebase + 16 * MB;
 			if (base != dart_tablebase)
 				BUG_ON(htab_bolt_mapping(base, dart_tablebase,
-							__pa(base), mode_rw,
+							__pa(base), prot,
 							mmu_linear_psize,
 							mmu_kernel_ssize));
 			if ((base + size) > dart_table_end)
 				BUG_ON(htab_bolt_mapping(dart_tablebase+16*MB,
 							base + size,
 							__pa(dart_table_end),
-							 mode_rw,
+							 prot,
 							 mmu_linear_psize,
 							 mmu_kernel_ssize));
 			continue;
 		}
 #endif /* CONFIG_U3_DART */
 		BUG_ON(htab_bolt_mapping(base, base + size, __pa(base),
-				mode_rw, mmu_linear_psize, mmu_kernel_ssize));
+				prot, mmu_linear_psize, mmu_kernel_ssize));
        }
 
 	/*
@@ -696,7 +716,7 @@ void __init htab_initialize(void)
 			tce_alloc_start = base + size + 1;
 
 		BUG_ON(htab_bolt_mapping(tce_alloc_start, tce_alloc_end,
-					 __pa(tce_alloc_start), mode_rw,
+					 __pa(tce_alloc_start), prot,
 					 mmu_linear_psize, mmu_kernel_ssize));
 	}
 
@@ -1117,8 +1137,7 @@ static void kernel_map_linear_page(unsigned long vaddr, unsigned long lmi)
 	unsigned long hash, hpteg;
 	unsigned long vsid = get_kernel_vsid(vaddr, mmu_kernel_ssize);
 	unsigned long va = hpt_va(vaddr, vsid, mmu_kernel_ssize);
-	unsigned long mode = _PAGE_ACCESSED | _PAGE_DIRTY |
-		_PAGE_COHERENT | PP_RWXX | HPTE_R_N;
+	unsigned long mode = htab_convert_pte_flags(PAGE_KERNEL);
 	int ret;
 
 	hash = hpt_hash(va, PAGE_SHIFT, mmu_kernel_ssize);
diff --git a/arch/powerpc/mm/hugetlbpage.c b/arch/powerpc/mm/hugetlbpage.c
index fb42c4dd3217..f1c2d55b4377 100644
--- a/arch/powerpc/mm/hugetlbpage.c
+++ b/arch/powerpc/mm/hugetlbpage.c
@@ -113,7 +113,7 @@ static inline pte_t *hugepte_offset(hugepd_t *hpdp, unsigned long addr,
 static int __hugepte_alloc(struct mm_struct *mm, hugepd_t *hpdp,
 			   unsigned long address, unsigned int psize)
 {
-	pte_t *new = kmem_cache_alloc(huge_pgtable_cache(psize),
+	pte_t *new = kmem_cache_zalloc(huge_pgtable_cache(psize),
 				      GFP_KERNEL|__GFP_REPEAT);
 
 	if (! new)
@@ -730,25 +730,27 @@ static int __init hugepage_setup_sz(char *str)
 }
 __setup("hugepagesz=", hugepage_setup_sz);
 
-static void zero_ctor(struct kmem_cache *cache, void *addr)
-{
-	memset(addr, 0, kmem_cache_size(cache));
-}
-
 static int __init hugetlbpage_init(void)
 {
 	unsigned int psize;
 
 	if (!cpu_has_feature(CPU_FTR_16M_PAGE))
 		return -ENODEV;
+
 	/* Add supported huge page sizes.  Need to change HUGE_MAX_HSTATE
 	 * and adjust PTE_NONCACHE_NUM if the number of supported huge page
 	 * sizes changes.
 	 */
 	set_huge_psize(MMU_PAGE_16M);
-	set_huge_psize(MMU_PAGE_64K);
 	set_huge_psize(MMU_PAGE_16G);
 
+	/* Temporarily disable support for 64K huge pages when 64K SPU local
+	 * store support is enabled as the current implementation conflicts.
+	 */
+#ifndef CONFIG_SPU_FS_64K_LS
+	set_huge_psize(MMU_PAGE_64K);
+#endif
+
 	for (psize = 0; psize < MMU_PAGE_COUNT; ++psize) {
 		if (mmu_huge_psizes[psize]) {
 			huge_pgtable_cache(psize) = kmem_cache_create(
@@ -756,7 +758,7 @@ static int __init hugetlbpage_init(void)
 						HUGEPTE_TABLE_SIZE(psize),
 						HUGEPTE_TABLE_SIZE(psize),
 						0,
-						zero_ctor);
+						NULL);
 			if (!huge_pgtable_cache(psize))
 				panic("hugetlbpage_init(): could not create %s"\
 				      "\n", HUGEPTE_CACHE_NAME(psize));
diff --git a/arch/powerpc/mm/init_64.c b/arch/powerpc/mm/init_64.c
index a41bc5aa2043..036fe2f10c77 100644
--- a/arch/powerpc/mm/init_64.c
+++ b/arch/powerpc/mm/init_64.c
@@ -136,9 +136,14 @@ static int __init setup_kcore(void)
 module_init(setup_kcore);
 #endif
 
-static void zero_ctor(struct kmem_cache *cache, void *addr)
+static void pgd_ctor(void *addr)
 {
-	memset(addr, 0, kmem_cache_size(cache));
+	memset(addr, 0, PGD_TABLE_SIZE);
+}
+
+static void pmd_ctor(void *addr)
+{
+	memset(addr, 0, PMD_TABLE_SIZE);
 }
 
 static const unsigned int pgtable_cache_size[2] = {
@@ -163,19 +168,8 @@ struct kmem_cache *pgtable_cache[ARRAY_SIZE(pgtable_cache_size)];
 
 void pgtable_cache_init(void)
 {
-	int i;
-
-	for (i = 0; i < ARRAY_SIZE(pgtable_cache_size); i++) {
-		int size = pgtable_cache_size[i];
-		const char *name = pgtable_cache_name[i];
-
-		pr_debug("Allocating page table cache %s (#%d) "
-			"for size: %08x...\n", name, i, size);
-		pgtable_cache[i] = kmem_cache_create(name,
-						     size, size,
-						     SLAB_PANIC,
-						     zero_ctor);
-	}
+	pgtable_cache[0] = kmem_cache_create(pgtable_cache_name[0], PGD_TABLE_SIZE, PGD_TABLE_SIZE, SLAB_PANIC, pgd_ctor);
+	pgtable_cache[1] = kmem_cache_create(pgtable_cache_name[1], PMD_TABLE_SIZE, PMD_TABLE_SIZE, SLAB_PANIC, pmd_ctor);
 }
 
 #ifdef CONFIG_SPARSEMEM_VMEMMAP
@@ -212,13 +206,10 @@ static int __meminit vmemmap_populated(unsigned long start, int page_size)
 int __meminit vmemmap_populate(struct page *start_page,
 			       unsigned long nr_pages, int node)
 {
-	unsigned long mode_rw;
 	unsigned long start = (unsigned long)start_page;
 	unsigned long end = (unsigned long)(start_page + nr_pages);
 	unsigned long page_size = 1 << mmu_psize_defs[mmu_vmemmap_psize].shift;
 
-	mode_rw = _PAGE_ACCESSED | _PAGE_DIRTY | _PAGE_COHERENT | PP_RWXX;
-
 	/* Align to the page size of the linear mapping. */
 	start = _ALIGN_DOWN(start, page_size);
 
@@ -236,9 +227,9 @@ int __meminit vmemmap_populate(struct page *start_page,
 		pr_debug("vmemmap %08lx allocated at %p, physical %08lx.\n",
 			start, p, __pa(p));
 
-		mapped = htab_bolt_mapping(start, start + page_size,
-					__pa(p), mode_rw, mmu_vmemmap_psize,
-					mmu_kernel_ssize);
+		mapped = htab_bolt_mapping(start, start + page_size, __pa(p),
+					   PAGE_KERNEL, mmu_vmemmap_psize,
+					   mmu_kernel_ssize);
 		BUG_ON(mapped < 0);
 	}
 
diff --git a/arch/powerpc/mm/mem.c b/arch/powerpc/mm/mem.c
index 1ca2235f0965..1c93c255873b 100644
--- a/arch/powerpc/mm/mem.c
+++ b/arch/powerpc/mm/mem.c
@@ -186,45 +186,6 @@ walk_memory_resource(unsigned long start_pfn, unsigned long nr_pages, void *arg,
 }
 EXPORT_SYMBOL_GPL(walk_memory_resource);
 
-void show_mem(void)
-{
-	unsigned long total = 0, reserved = 0;
-	unsigned long shared = 0, cached = 0;
-	unsigned long highmem = 0;
-	struct page *page;
-	pg_data_t *pgdat;
-	unsigned long i;
-
-	printk("Mem-info:\n");
-	show_free_areas();
-	for_each_online_pgdat(pgdat) {
-		unsigned long flags;
-		pgdat_resize_lock(pgdat, &flags);
-		for (i = 0; i < pgdat->node_spanned_pages; i++) {
-			if (!pfn_valid(pgdat->node_start_pfn + i))
-				continue;
-			page = pgdat_page_nr(pgdat, i);
-			total++;
-			if (PageHighMem(page))
-				highmem++;
-			if (PageReserved(page))
-				reserved++;
-			else if (PageSwapCache(page))
-				cached++;
-			else if (page_count(page))
-				shared += page_count(page) - 1;
-		}
-		pgdat_resize_unlock(pgdat, &flags);
-	}
-	printk("%ld pages of RAM\n", total);
-#ifdef CONFIG_HIGHMEM
-	printk("%ld pages of HIGHMEM\n", highmem);
-#endif
-	printk("%ld reserved pages\n", reserved);
-	printk("%ld pages shared\n", shared);
-	printk("%ld pages swap cached\n", cached);
-}
-
 /*
  * Initialize the bootmem system and give it all the memory we
  * have available.  If we are using highmem, we only put the
@@ -350,7 +311,7 @@ void __init paging_init(void)
 #endif /* CONFIG_HIGHMEM */
 
 	printk(KERN_DEBUG "Top of RAM: 0x%llx, Total RAM: 0x%lx\n",
-	       (u64)top_of_ram, total_ram);
+	       (unsigned long long)top_of_ram, total_ram);
 	printk(KERN_DEBUG "Memory hole size: %ldMB\n",
 	       (long int)((top_of_ram - total_ram) >> 20));
 	memset(max_zone_pfns, 0, sizeof(max_zone_pfns));
diff --git a/arch/powerpc/mm/ppc_mmu_32.c b/arch/powerpc/mm/ppc_mmu_32.c
index c53145f61942..6aa120813775 100644
--- a/arch/powerpc/mm/ppc_mmu_32.c
+++ b/arch/powerpc/mm/ppc_mmu_32.c
@@ -236,8 +236,8 @@ void __init MMU_init_hw(void)
 
 	Hash_end = (struct hash_pte *) ((unsigned long)Hash + Hash_size);
 
-	printk("Total memory = %ldMB; using %ldkB for hash table (at %p)\n",
-	       total_memory >> 20, Hash_size >> 10, Hash);
+	printk("Total memory = %lldMB; using %ldkB for hash table (at %p)\n",
+	       (unsigned long long)(total_memory >> 20), Hash_size >> 10, Hash);
 
 
 	/*
diff --git a/arch/powerpc/mm/tlb_64.c b/arch/powerpc/mm/tlb_64.c
index 409fcc7b63ce..be7dd422c0fa 100644
--- a/arch/powerpc/mm/tlb_64.c
+++ b/arch/powerpc/mm/tlb_64.c
@@ -34,7 +34,7 @@
 DEFINE_PER_CPU(struct ppc64_tlb_batch, ppc64_tlb_batch);
 
 /* This is declared as we are using the more or less generic
- * include/asm-powerpc/tlb.h file -- tgall
+ * arch/powerpc/include/asm/tlb.h file -- tgall
  */
 DEFINE_PER_CPU(struct mmu_gather, mmu_gathers);
 static DEFINE_PER_CPU(struct pte_freelist_batch *, pte_freelist_cur);
diff --git a/arch/powerpc/platforms/44x/warp-nand.c b/arch/powerpc/platforms/44x/warp-nand.c
index e55746b824b4..89ecd76127d8 100644
--- a/arch/powerpc/platforms/44x/warp-nand.c
+++ b/arch/powerpc/platforms/44x/warp-nand.c
@@ -24,7 +24,7 @@
 
 static struct resource warp_ndfc = {
 	.start = WARP_NAND_FLASH_REG_ADDR,
-	.end   = WARP_NAND_FLASH_REG_ADDR + WARP_NAND_FLASH_REG_SIZE,
+	.end   = WARP_NAND_FLASH_REG_ADDR + WARP_NAND_FLASH_REG_SIZE - 1,
 	.flags = IORESOURCE_MEM,
 };
 
diff --git a/arch/powerpc/platforms/44x/warp.c b/arch/powerpc/platforms/44x/warp.c
index 9565995cba7f..960edf89be51 100644
--- a/arch/powerpc/platforms/44x/warp.c
+++ b/arch/powerpc/platforms/44x/warp.c
@@ -30,18 +30,6 @@ static __initdata struct of_device_id warp_of_bus[] = {
 	{},
 };
 
-static __initdata struct i2c_board_info warp_i2c_info[] = {
-	{ I2C_BOARD_INFO("ad7414", 0x4a) }
-};
-
-static int __init warp_arch_init(void)
-{
-	/* This should go away once support is moved to the dts. */
-	i2c_register_board_info(0, warp_i2c_info, ARRAY_SIZE(warp_i2c_info));
-	return 0;
-}
-machine_arch_initcall(warp, warp_arch_init);
-
 static int __init warp_device_probe(void)
 {
 	of_platform_bus_probe(NULL, warp_of_bus, NULL);
@@ -223,7 +211,7 @@ static void pika_setup_critical_temp(struct i2c_client *client)
 
 	/* These registers are in 1 degree increments. */
 	i2c_smbus_write_byte_data(client, 2, 65); /* Thigh */
-	i2c_smbus_write_byte_data(client, 3, 55); /* Tlow */
+	i2c_smbus_write_byte_data(client, 3,  0); /* Tlow */
 
 	np = of_find_compatible_node(NULL, NULL, "adi,ad7414");
 	if (np == NULL) {
@@ -289,8 +277,15 @@ found_it:
 	printk(KERN_INFO "PIKA DTM thread running.\n");
 
 	while (!kthread_should_stop()) {
-		u16 temp = swab16(i2c_smbus_read_word_data(client, 0));
-		out_be32(fpga + 0x20, temp);
+		int val;
+
+		val = i2c_smbus_read_word_data(client, 0);
+		if (val < 0)
+			dev_dbg(&client->dev, "DTM read temp failed.\n");
+		else {
+			s16 temp = swab16(val);
+			out_be32(fpga + 0x20, temp);
+		}
 
 		pika_dtm_check_fan(fpga);
 
diff --git a/arch/powerpc/platforms/52xx/Kconfig b/arch/powerpc/platforms/52xx/Kconfig
index d664b1bce381..696a5ee4962d 100644
--- a/arch/powerpc/platforms/52xx/Kconfig
+++ b/arch/powerpc/platforms/52xx/Kconfig
@@ -1,7 +1,6 @@
 config PPC_MPC52xx
 	bool "52xx-based boards"
 	depends on PPC_MULTIPLATFORM && PPC32
-	select FSL_SOC
 	select PPC_CLOCK
 	select PPC_PCI_CHOICE
 
@@ -48,6 +47,7 @@ config PPC_MPC5200_BUGFIX
 config PPC_MPC5200_GPIO
 	bool "MPC5200 GPIO support"
 	depends on PPC_MPC52xx
-	select HAVE_GPIO_LIB
+	select ARCH_REQUIRE_GPIOLIB
+	select GENERIC_GPIO
 	help
 	  Enable gpiolib support for mpc5200 based boards
diff --git a/arch/powerpc/platforms/52xx/Makefile b/arch/powerpc/platforms/52xx/Makefile
index daf0e1568d6d..b8a52062738a 100644
--- a/arch/powerpc/platforms/52xx/Makefile
+++ b/arch/powerpc/platforms/52xx/Makefile
@@ -1,10 +1,8 @@
 #
 # Makefile for 52xx based boards
 #
-ifeq ($(CONFIG_PPC_MERGE),y)
 obj-y				+= mpc52xx_pic.o mpc52xx_common.o
 obj-$(CONFIG_PCI)		+= mpc52xx_pci.o
-endif
 
 obj-$(CONFIG_PPC_MPC5200_SIMPLE) += mpc5200_simple.o
 obj-$(CONFIG_PPC_EFIKA)		+= efika.o
@@ -15,4 +13,4 @@ ifeq ($(CONFIG_PPC_LITE5200),y)
 	obj-$(CONFIG_PM)	+= lite5200_sleep.o lite5200_pm.o
 endif
 
-obj-$(CONFIG_PPC_MPC5200_GPIO)	+= mpc52xx_gpio.o
\ No newline at end of file
+obj-$(CONFIG_PPC_MPC5200_GPIO)	+= mpc52xx_gpio.o
diff --git a/arch/powerpc/platforms/83xx/mpc832x_mds.c b/arch/powerpc/platforms/83xx/mpc832x_mds.c
index dd4be4aee314..ec43477caa63 100644
--- a/arch/powerpc/platforms/83xx/mpc832x_mds.c
+++ b/arch/powerpc/platforms/83xx/mpc832x_mds.c
@@ -105,6 +105,7 @@ static void __init mpc832x_sys_setup_arch(void)
 static struct of_device_id mpc832x_ids[] = {
 	{ .type = "soc", },
 	{ .compatible = "soc", },
+	{ .compatible = "simple-bus", },
 	{ .type = "qe", },
 	{ .compatible = "fsl,qe", },
 	{},
diff --git a/arch/powerpc/platforms/83xx/mpc832x_rdb.c b/arch/powerpc/platforms/83xx/mpc832x_rdb.c
index f049d692d4c8..0300268ce5b8 100644
--- a/arch/powerpc/platforms/83xx/mpc832x_rdb.c
+++ b/arch/powerpc/platforms/83xx/mpc832x_rdb.c
@@ -115,6 +115,7 @@ static void __init mpc832x_rdb_setup_arch(void)
 static struct of_device_id mpc832x_ids[] = {
 	{ .type = "soc", },
 	{ .compatible = "soc", },
+	{ .compatible = "simple-bus", },
 	{ .type = "qe", },
 	{ .compatible = "fsl,qe", },
 	{},
diff --git a/arch/powerpc/platforms/83xx/mpc834x_itx.c b/arch/powerpc/platforms/83xx/mpc834x_itx.c
index 7301d77a08ee..76092d37c7d9 100644
--- a/arch/powerpc/platforms/83xx/mpc834x_itx.c
+++ b/arch/powerpc/platforms/83xx/mpc834x_itx.c
@@ -41,6 +41,7 @@
 
 static struct of_device_id __initdata mpc834x_itx_ids[] = {
 	{ .compatible = "fsl,pq2pro-localbus", },
+	{ .compatible = "simple-bus", },
 	{},
 };
 
diff --git a/arch/powerpc/platforms/83xx/mpc834x_mds.c b/arch/powerpc/platforms/83xx/mpc834x_mds.c
index 30d509aa9f08..fc3f2ed1f3e9 100644
--- a/arch/powerpc/platforms/83xx/mpc834x_mds.c
+++ b/arch/powerpc/platforms/83xx/mpc834x_mds.c
@@ -111,6 +111,7 @@ static void __init mpc834x_mds_init_IRQ(void)
 static struct of_device_id mpc834x_ids[] = {
 	{ .type = "soc", },
 	{ .compatible = "soc", },
+	{ .compatible = "simple-bus", },
 	{},
 };
 
diff --git a/arch/powerpc/platforms/83xx/mpc836x_mds.c b/arch/powerpc/platforms/83xx/mpc836x_mds.c
index 75b80e836576..9d46e5bdd101 100644
--- a/arch/powerpc/platforms/83xx/mpc836x_mds.c
+++ b/arch/powerpc/platforms/83xx/mpc836x_mds.c
@@ -136,6 +136,7 @@ static void __init mpc836x_mds_setup_arch(void)
 static struct of_device_id mpc836x_ids[] = {
 	{ .type = "soc", },
 	{ .compatible = "soc", },
+	{ .compatible = "simple-bus", },
 	{ .type = "qe", },
 	{ .compatible = "fsl,qe", },
 	{},
diff --git a/arch/powerpc/platforms/83xx/sbc834x.c b/arch/powerpc/platforms/83xx/sbc834x.c
index fc21f5c15bab..156c4e218009 100644
--- a/arch/powerpc/platforms/83xx/sbc834x.c
+++ b/arch/powerpc/platforms/83xx/sbc834x.c
@@ -83,6 +83,7 @@ static void __init sbc834x_init_IRQ(void)
 static struct __initdata of_device_id sbc834x_ids[] = {
 	{ .type = "soc", },
 	{ .compatible = "soc", },
+	{ .compatible = "simple-bus", },
 	{},
 };
 
diff --git a/arch/powerpc/platforms/85xx/ksi8560.c b/arch/powerpc/platforms/85xx/ksi8560.c
index 2145adeb220c..8a3b117b6ce2 100644
--- a/arch/powerpc/platforms/85xx/ksi8560.c
+++ b/arch/powerpc/platforms/85xx/ksi8560.c
@@ -222,6 +222,7 @@ static void ksi8560_show_cpuinfo(struct seq_file *m)
 
 static struct of_device_id __initdata of_bus_ids[] = {
 	{ .type = "soc", },
+	{ .type = "simple-bus", },
 	{ .name = "cpm", },
 	{ .name = "localbus", },
 	{},
diff --git a/arch/powerpc/platforms/85xx/mpc8536_ds.c b/arch/powerpc/platforms/85xx/mpc8536_ds.c
index 6b846aa1ced9..1bf5aefdfeb1 100644
--- a/arch/powerpc/platforms/85xx/mpc8536_ds.c
+++ b/arch/powerpc/platforms/85xx/mpc8536_ds.c
@@ -91,6 +91,7 @@ static void __init mpc8536_ds_setup_arch(void)
 static struct of_device_id __initdata mpc8536_ds_ids[] = {
 	{ .type = "soc", },
 	{ .compatible = "soc", },
+	{ .compatible = "simple-bus", },
 	{},
 };
 
diff --git a/arch/powerpc/platforms/85xx/mpc85xx_ads.c b/arch/powerpc/platforms/85xx/mpc85xx_ads.c
index ba498d6f2d02..d17807a6b89a 100644
--- a/arch/powerpc/platforms/85xx/mpc85xx_ads.c
+++ b/arch/powerpc/platforms/85xx/mpc85xx_ads.c
@@ -230,6 +230,7 @@ static struct of_device_id __initdata of_bus_ids[] = {
 	{ .type = "soc", },
 	{ .name = "cpm", },
 	{ .name = "localbus", },
+	{ .compatible = "simple-bus", },
 	{},
 };
 
diff --git a/arch/powerpc/platforms/85xx/mpc85xx_ds.c b/arch/powerpc/platforms/85xx/mpc85xx_ds.c
index 00c535806647..483b65cbabae 100644
--- a/arch/powerpc/platforms/85xx/mpc85xx_ds.c
+++ b/arch/powerpc/platforms/85xx/mpc85xx_ds.c
@@ -186,6 +186,7 @@ static int __init mpc8544_ds_probe(void)
 static struct of_device_id __initdata mpc85xxds_ids[] = {
 	{ .type = "soc", },
 	{ .compatible = "soc", },
+	{ .compatible = "simple-bus", },
 	{},
 };
 
diff --git a/arch/powerpc/platforms/85xx/mpc85xx_mds.c b/arch/powerpc/platforms/85xx/mpc85xx_mds.c
index 43a459f63e31..2494c5155919 100644
--- a/arch/powerpc/platforms/85xx/mpc85xx_mds.c
+++ b/arch/powerpc/platforms/85xx/mpc85xx_mds.c
@@ -260,6 +260,7 @@ machine_arch_initcall(mpc85xx_mds, board_fixups);
 static struct of_device_id mpc85xx_ids[] = {
 	{ .type = "soc", },
 	{ .compatible = "soc", },
+	{ .compatible = "simple-bus", },
 	{ .type = "qe", },
 	{ .compatible = "fsl,qe", },
 	{},
diff --git a/arch/powerpc/platforms/85xx/sbc8560.c b/arch/powerpc/platforms/85xx/sbc8560.c
index 2c580cd24e4f..6509ade71668 100644
--- a/arch/powerpc/platforms/85xx/sbc8560.c
+++ b/arch/powerpc/platforms/85xx/sbc8560.c
@@ -217,6 +217,7 @@ static struct of_device_id __initdata of_bus_ids[] = {
 	{ .type = "soc", },
 	{ .name = "cpm", },
 	{ .name = "localbus", },
+	{ .compatible = "simple-bus", },
 	{},
 };
 
diff --git a/arch/powerpc/platforms/86xx/mpc86xx_smp.c b/arch/powerpc/platforms/86xx/mpc86xx_smp.c
index 835f2dc24dc9..014e26cda08d 100644
--- a/arch/powerpc/platforms/86xx/mpc86xx_smp.c
+++ b/arch/powerpc/platforms/86xx/mpc86xx_smp.c
@@ -19,7 +19,7 @@
 #include <asm/page.h>
 #include <asm/pgtable.h>
 #include <asm/pci-bridge.h>
-#include <asm-powerpc/mpic.h>
+#include <asm/mpic.h>
 #include <asm/mpc86xx.h>
 #include <asm/cacheflush.h>
 
diff --git a/arch/powerpc/platforms/8xx/Kconfig b/arch/powerpc/platforms/8xx/Kconfig
index 6fc849e51e48..71d7562e190b 100644
--- a/arch/powerpc/platforms/8xx/Kconfig
+++ b/arch/powerpc/platforms/8xx/Kconfig
@@ -105,6 +105,16 @@ config 8xx_COPYBACK
 
 	  If in doubt, say Y here.
 
+config 8xx_GPIO
+	bool "GPIO API Support"
+	select GENERIC_GPIO
+	select ARCH_REQUIRE_GPIOLIB
+	help
+	  Saying Y here will cause the ports on an MPC8xx processor to be used
+	  with the GPIO API.  If you say N here, the kernel needs less memory.
+
+	  If in doubt, say Y here.
+
 config 8xx_CPU6
 	bool "CPU6 Silicon Errata (860 Pre Rev. C)"
 	help
diff --git a/arch/powerpc/platforms/Kconfig b/arch/powerpc/platforms/Kconfig
index 1d0968775c0a..4c900efa164e 100644
--- a/arch/powerpc/platforms/Kconfig
+++ b/arch/powerpc/platforms/Kconfig
@@ -254,6 +254,8 @@ config CPM2
 	select CPM
 	select PPC_LIB_RHEAP
 	select PPC_PCI_CHOICE
+	select ARCH_REQUIRE_GPIOLIB
+	select GENERIC_GPIO
 	help
 	  The CPM2 (Communications Processor Module) is a coprocessor on
 	  embedded CPUs made by Freescale.  Selecting this option means that
@@ -281,6 +283,7 @@ config FSL_ULI1575
 
 config CPM
 	bool
+	select PPC_CLOCK
 
 config OF_RTC
 	bool
diff --git a/arch/powerpc/platforms/Makefile b/arch/powerpc/platforms/Makefile
index 423a0234dc31..8079e0b4fd69 100644
--- a/arch/powerpc/platforms/Makefile
+++ b/arch/powerpc/platforms/Makefile
@@ -1,13 +1,7 @@
 
 obj-$(CONFIG_FSL_ULI1575)	+= fsl_uli1575.o
 
-ifeq ($(CONFIG_PPC_MERGE),y)
 obj-$(CONFIG_PPC_PMAC)		+= powermac/
-else
-ifeq ($(CONFIG_PPC64),y)
-obj-$(CONFIG_PPC_PMAC)		+= powermac/
-endif
-endif
 obj-$(CONFIG_PPC_CHRP)		+= chrp/
 obj-$(CONFIG_40x)		+= 40x/
 obj-$(CONFIG_44x)		+= 44x/
diff --git a/arch/powerpc/platforms/cell/cbe_cpufreq_pmi.c b/arch/powerpc/platforms/cell/cbe_cpufreq_pmi.c
index 69288f653144..3233fe84d158 100644
--- a/arch/powerpc/platforms/cell/cbe_cpufreq_pmi.c
+++ b/arch/powerpc/platforms/cell/cbe_cpufreq_pmi.c
@@ -96,6 +96,12 @@ static int pmi_notifier(struct notifier_block *nb,
 	struct cpufreq_frequency_table *cbe_freqs;
 	u8 node;
 
+	/* Should this really be called for CPUFREQ_ADJUST, CPUFREQ_INCOMPATIBLE
+	 * and CPUFREQ_NOTIFY policy events?)
+	 */
+	if (event == CPUFREQ_START)
+		return 0;
+
 	cbe_freqs = cpufreq_frequency_get_table(policy->cpu);
 	node = cbe_cpu_to_node(policy->cpu);
 
diff --git a/arch/powerpc/platforms/cell/celleb_scc_pciex.c b/arch/powerpc/platforms/cell/celleb_scc_pciex.c
index 0e04f8fb152a..3e7e0f1568ef 100644
--- a/arch/powerpc/platforms/cell/celleb_scc_pciex.c
+++ b/arch/powerpc/platforms/cell/celleb_scc_pciex.c
@@ -281,7 +281,7 @@ static int __init scc_pciex_iowa_init(struct iowa_bus *bus, void *data)
 
 	dummy_page_da = dma_map_single(bus->phb->parent, dummy_page_va,
 				       PAGE_SIZE, DMA_FROM_DEVICE);
-	if (dma_mapping_error(dummy_page_da)) {
+	if (dma_mapping_error(bus->phb->parent, dummy_page_da)) {
 		pr_err("PCIEX:Map dummy page failed.\n");
 		kfree(dummy_page_va);
 		return -1;
diff --git a/arch/powerpc/platforms/cell/iommu.c b/arch/powerpc/platforms/cell/iommu.c
index 208005ca262c..e06420af5fe9 100644
--- a/arch/powerpc/platforms/cell/iommu.c
+++ b/arch/powerpc/platforms/cell/iommu.c
@@ -172,7 +172,7 @@ static void invalidate_tce_cache(struct cbe_iommu *iommu, unsigned long *pte,
 	}
 }
 
-static void tce_build_cell(struct iommu_table *tbl, long index, long npages,
+static int tce_build_cell(struct iommu_table *tbl, long index, long npages,
 		unsigned long uaddr, enum dma_data_direction direction,
 		struct dma_attrs *attrs)
 {
@@ -213,6 +213,7 @@ static void tce_build_cell(struct iommu_table *tbl, long index, long npages,
 
 	pr_debug("tce_build_cell(index=%lx,n=%lx,dir=%d,base_pte=%lx)\n",
 		 index, npages, direction, base_pte);
+	return 0;
 }
 
 static void tce_free_cell(struct iommu_table *tbl, long index, long npages)
@@ -1150,12 +1151,23 @@ static int iommu_fixed_disabled;
 
 static int __init setup_iommu_fixed(char *str)
 {
+	struct device_node *pciep;
+
 	if (strcmp(str, "off") == 0)
 		iommu_fixed_disabled = 1;
 
-	else if (strcmp(str, "weak") == 0)
+	/* If we can find a pcie-endpoint in the device tree assume that
+	 * we're on a triblade or a CAB so by default the fixed mapping
+	 * should be set to be weakly ordered; but only if the boot
+	 * option WASN'T set for strong ordering
+	 */
+	pciep = of_find_node_by_type(NULL, "pcie-endpoint");
+
+	if (strcmp(str, "weak") == 0 || (pciep && strcmp(str, "strong") != 0))
 		iommu_fixed_is_weak = 1;
 
+	of_node_put(pciep);
+
 	return 1;
 }
 __setup("iommu_fixed=", setup_iommu_fixed);
diff --git a/arch/powerpc/platforms/cell/spider-pci.c b/arch/powerpc/platforms/cell/spider-pci.c
index 418b605ac35a..5122ec145271 100644
--- a/arch/powerpc/platforms/cell/spider-pci.c
+++ b/arch/powerpc/platforms/cell/spider-pci.c
@@ -111,7 +111,7 @@ static int __init spiderpci_pci_setup_chip(struct pci_controller *phb,
 
 	dummy_page_da = dma_map_single(phb->parent, dummy_page_va,
 				       PAGE_SIZE, DMA_FROM_DEVICE);
-	if (dma_mapping_error(dummy_page_da)) {
+	if (dma_mapping_error(phb->parent, dummy_page_da)) {
 		pr_err("SPIDER-IOWA:Map dummy page filed.\n");
 		kfree(dummy_page_va);
 		return -1;
diff --git a/arch/powerpc/platforms/cell/spufs/inode.c b/arch/powerpc/platforms/cell/spufs/inode.c
index 7123472801d9..690ca7b0dcf6 100644
--- a/arch/powerpc/platforms/cell/spufs/inode.c
+++ b/arch/powerpc/platforms/cell/spufs/inode.c
@@ -78,7 +78,7 @@ spufs_destroy_inode(struct inode *inode)
 }
 
 static void
-spufs_init_once(struct kmem_cache *cachep, void *p)
+spufs_init_once(void *p)
 {
 	struct spufs_inode_info *ei = p;
 
diff --git a/arch/powerpc/platforms/cell/spufs/run.c b/arch/powerpc/platforms/cell/spufs/run.c
index f7edba6cb795..c9bb7cfd3dca 100644
--- a/arch/powerpc/platforms/cell/spufs/run.c
+++ b/arch/powerpc/platforms/cell/spufs/run.c
@@ -206,11 +206,6 @@ static int spu_run_init(struct spu_context *ctx, u32 *npc)
 			(SPU_RUNCNTL_RUNNABLE | SPU_RUNCNTL_ISOLATE);
 		if (runcntl == 0)
 			runcntl = SPU_RUNCNTL_RUNNABLE;
-	}
-
-	if (ctx->flags & SPU_CREATE_NOSCHED) {
-		spuctx_switch_state(ctx, SPU_UTIL_USER);
-		ctx->ops->runcntl_write(ctx, runcntl);
 	} else {
 		unsigned long privcntl;
 
@@ -219,9 +214,15 @@ static int spu_run_init(struct spu_context *ctx, u32 *npc)
 		else
 			privcntl = SPU_PRIVCNTL_MODE_NORMAL;
 
-		ctx->ops->npc_write(ctx, *npc);
 		ctx->ops->privcntl_write(ctx, privcntl);
-		ctx->ops->runcntl_write(ctx, runcntl);
+		ctx->ops->npc_write(ctx, *npc);
+	}
+
+	ctx->ops->runcntl_write(ctx, runcntl);
+
+	if (ctx->flags & SPU_CREATE_NOSCHED) {
+		spuctx_switch_state(ctx, SPU_UTIL_USER);
+	} else {
 
 		if (ctx->state == SPU_STATE_SAVED) {
 			ret = spu_activate(ctx, 0);
diff --git a/arch/powerpc/platforms/cell/spufs/sched.c b/arch/powerpc/platforms/cell/spufs/sched.c
index 34654743363d..1c1b627ee843 100644
--- a/arch/powerpc/platforms/cell/spufs/sched.c
+++ b/arch/powerpc/platforms/cell/spufs/sched.c
@@ -312,11 +312,28 @@ static struct spu *aff_ref_location(struct spu_context *ctx, int mem_aff,
 	 */
 	node = cpu_to_node(raw_smp_processor_id());
 	for (n = 0; n < MAX_NUMNODES; n++, node++) {
+		int available_spus;
+
 		node = (node < MAX_NUMNODES) ? node : 0;
 		if (!node_allowed(ctx, node))
 			continue;
+
+		available_spus = 0;
 		mutex_lock(&cbe_spu_info[node].list_mutex);
 		list_for_each_entry(spu, &cbe_spu_info[node].spus, cbe_list) {
+			if (spu->ctx && spu->ctx->gang
+					&& spu->ctx->aff_offset == 0)
+				available_spus -=
+					(spu->ctx->gang->contexts - 1);
+			else
+				available_spus++;
+		}
+		if (available_spus < ctx->gang->contexts) {
+			mutex_unlock(&cbe_spu_info[node].list_mutex);
+			continue;
+		}
+
+		list_for_each_entry(spu, &cbe_spu_info[node].spus, cbe_list) {
 			if ((!mem_aff || spu->has_mem_affinity) &&
 							sched_spu(spu)) {
 				mutex_unlock(&cbe_spu_info[node].list_mutex);
@@ -389,6 +406,9 @@ static int has_affinity(struct spu_context *ctx)
 	if (list_empty(&ctx->aff_list))
 		return 0;
 
+	if (atomic_read(&ctx->gang->aff_sched_count) == 0)
+		ctx->gang->aff_ref_spu = NULL;
+
 	if (!gang->aff_ref_spu) {
 		if (!(gang->aff_flags & AFF_MERGED))
 			aff_merge_remaining_ctxs(gang);
@@ -416,14 +436,8 @@ static void spu_unbind_context(struct spu *spu, struct spu_context *ctx)
  	if (spu->ctx->flags & SPU_CREATE_NOSCHED)
 		atomic_dec(&cbe_spu_info[spu->node].reserved_spus);
 
-	if (ctx->gang){
-		mutex_lock(&ctx->gang->aff_mutex);
-		if (has_affinity(ctx)) {
-			if (atomic_dec_and_test(&ctx->gang->aff_sched_count))
-				ctx->gang->aff_ref_spu = NULL;
-		}
-		mutex_unlock(&ctx->gang->aff_mutex);
-	}
+	if (ctx->gang)
+		atomic_dec_if_positive(&ctx->gang->aff_sched_count);
 
 	spu_switch_notify(spu, NULL);
 	spu_unmap_mappings(ctx);
@@ -562,10 +576,7 @@ static struct spu *spu_get_idle(struct spu_context *ctx)
 				goto found;
 			mutex_unlock(&cbe_spu_info[node].list_mutex);
 
-			mutex_lock(&ctx->gang->aff_mutex);
-			if (atomic_dec_and_test(&ctx->gang->aff_sched_count))
-				ctx->gang->aff_ref_spu = NULL;
-			mutex_unlock(&ctx->gang->aff_mutex);
+			atomic_dec(&ctx->gang->aff_sched_count);
 			goto not_found;
 		}
 		mutex_unlock(&ctx->gang->aff_mutex);
@@ -630,8 +641,10 @@ static struct spu *find_victim(struct spu_context *ctx)
 
 			if (tmp && tmp->prio > ctx->prio &&
 			    !(tmp->flags & SPU_CREATE_NOSCHED) &&
-			    (!victim || tmp->prio > victim->prio))
+			    (!victim || tmp->prio > victim->prio)) {
 				victim = spu->ctx;
+				get_spu_context(victim);
+			}
 		}
 		mutex_unlock(&cbe_spu_info[node].list_mutex);
 
@@ -647,6 +660,7 @@ static struct spu *find_victim(struct spu_context *ctx)
 			 * look at another context or give up after X retries.
 			 */
 			if (!mutex_trylock(&victim->state_mutex)) {
+				put_spu_context(victim);
 				victim = NULL;
 				goto restart;
 			}
@@ -659,6 +673,7 @@ static struct spu *find_victim(struct spu_context *ctx)
 				 * restart the search.
 				 */
 				mutex_unlock(&victim->state_mutex);
+				put_spu_context(victim);
 				victim = NULL;
 				goto restart;
 			}
@@ -676,6 +691,7 @@ static struct spu *find_victim(struct spu_context *ctx)
 				spu_add_to_rq(victim);
 
 			mutex_unlock(&victim->state_mutex);
+			put_spu_context(victim);
 
 			return spu;
 		}
@@ -974,9 +990,11 @@ static int spusched_thread(void *unused)
 				struct spu_context *ctx = spu->ctx;
 
 				if (ctx) {
+					get_spu_context(ctx);
 					mutex_unlock(mtx);
 					spusched_tick(ctx);
 					mutex_lock(mtx);
+					put_spu_context(ctx);
 				}
 			}
 			mutex_unlock(mtx);
@@ -1019,7 +1037,7 @@ void spuctx_switch_state(struct spu_context *ctx,
 		node = spu->node;
 		if (old_state == SPU_UTIL_USER)
 			atomic_dec(&cbe_spu_info[node].busy_spus);
-		if (new_state == SPU_UTIL_USER);
+		if (new_state == SPU_UTIL_USER)
 			atomic_inc(&cbe_spu_info[node].busy_spus);
 	}
 }
diff --git a/arch/powerpc/platforms/cell/spufs/sputrace.c b/arch/powerpc/platforms/cell/spufs/sputrace.c
index 8c0e95766a62..92d20e993ede 100644
--- a/arch/powerpc/platforms/cell/spufs/sputrace.c
+++ b/arch/powerpc/platforms/cell/spufs/sputrace.c
@@ -196,8 +196,7 @@ static int __init sputrace_init(void)
 	struct proc_dir_entry *entry;
 	int i, error = -ENOMEM;
 
-	sputrace_log = kcalloc(sizeof(struct sputrace),
-				bufsize, GFP_KERNEL);
+	sputrace_log = kcalloc(bufsize, sizeof(struct sputrace), GFP_KERNEL);
 	if (!sputrace_log)
 		goto out;
 
diff --git a/arch/powerpc/platforms/iseries/Kconfig b/arch/powerpc/platforms/iseries/Kconfig
index ea3e541ac74f..45ffd8e542f4 100644
--- a/arch/powerpc/platforms/iseries/Kconfig
+++ b/arch/powerpc/platforms/iseries/Kconfig
@@ -7,15 +7,6 @@ config PPC_ISERIES
 menu "iSeries device drivers"
 	depends on PPC_ISERIES
 
-config VIOCONS
-	bool "iSeries Virtual Console Support (Obsolete)"
-	depends on !HVC_ISERIES
-	default n
-	help
-	  This is the old virtual console driver for legacy iSeries.
-	  You should use the iSeries Hypervisor Virtual Console
-	  support instead.
-
 config VIODASD
 	tristate "iSeries Virtual I/O disk support"
 	help
@@ -38,5 +29,5 @@ endmenu
 
 config VIOPATH
 	bool
-	depends on VIOCONS || VIODASD || VIOCD || VIOTAPE || ISERIES_VETH
+	depends on VIODASD || VIOCD || VIOTAPE || ISERIES_VETH
 	default y
diff --git a/arch/powerpc/platforms/iseries/iommu.c b/arch/powerpc/platforms/iseries/iommu.c
index bc818e4e2033..bb464d1211b2 100644
--- a/arch/powerpc/platforms/iseries/iommu.c
+++ b/arch/powerpc/platforms/iseries/iommu.c
@@ -41,7 +41,7 @@
 #include <asm/iseries/hv_call_event.h>
 #include <asm/iseries/iommu.h>
 
-static void tce_build_iSeries(struct iommu_table *tbl, long index, long npages,
+static int tce_build_iSeries(struct iommu_table *tbl, long index, long npages,
 		unsigned long uaddr, enum dma_data_direction direction,
 		struct dma_attrs *attrs)
 {
@@ -71,6 +71,7 @@ static void tce_build_iSeries(struct iommu_table *tbl, long index, long npages,
 		index++;
 		uaddr += TCE_PAGE_SIZE;
 	}
+	return 0;
 }
 
 static void tce_free_iSeries(struct iommu_table *tbl, long index, long npages)
diff --git a/arch/powerpc/platforms/iseries/mf.c b/arch/powerpc/platforms/iseries/mf.c
index 1dc7295746da..731d7b157749 100644
--- a/arch/powerpc/platforms/iseries/mf.c
+++ b/arch/powerpc/platforms/iseries/mf.c
@@ -871,7 +871,7 @@ static int proc_mf_dump_cmdline(char *page, char **start, off_t off,
 		count = 256 - off;
 
 	dma_addr = iseries_hv_map(page, off + count, DMA_FROM_DEVICE);
-	if (dma_mapping_error(dma_addr))
+	if (dma_mapping_error(NULL, dma_addr))
 		return -ENOMEM;
 	memset(page, 0, off + count);
 	memset(&vsp_cmd, 0, sizeof(vsp_cmd));
diff --git a/arch/powerpc/platforms/pasemi/iommu.c b/arch/powerpc/platforms/pasemi/iommu.c
index 70541b7a5013..a0ff03a3d8da 100644
--- a/arch/powerpc/platforms/pasemi/iommu.c
+++ b/arch/powerpc/platforms/pasemi/iommu.c
@@ -83,7 +83,7 @@ static u32 *iob_l2_base;
 static struct iommu_table iommu_table_iobmap;
 static int iommu_table_iobmap_inited;
 
-static void iobmap_build(struct iommu_table *tbl, long index,
+static int iobmap_build(struct iommu_table *tbl, long index,
 			 long npages, unsigned long uaddr,
 			 enum dma_data_direction direction,
 			 struct dma_attrs *attrs)
@@ -108,6 +108,7 @@ static void iobmap_build(struct iommu_table *tbl, long index,
 		uaddr += IOBMAP_PAGE_SIZE;
 		bus_addr += IOBMAP_PAGE_SIZE;
 	}
+	return 0;
 }
 
 
diff --git a/arch/powerpc/platforms/powermac/Makefile b/arch/powerpc/platforms/powermac/Makefile
index 89774177b209..be60d64be7ad 100644
--- a/arch/powerpc/platforms/powermac/Makefile
+++ b/arch/powerpc/platforms/powermac/Makefile
@@ -2,12 +2,12 @@ CFLAGS_bootx_init.o  		+= -fPIC
 
 ifdef CONFIG_FTRACE
 # Do not trace early boot code
-CFLAGS_REMOVE_bootx_init.o = -pg
+CFLAGS_REMOVE_bootx_init.o = -pg -mno-sched-epilog
 endif
 
 obj-y				+= pic.o setup.o time.o feature.o pci.o \
 				   sleep.o low_i2c.o cache.o pfunc_core.o \
-				   pfunc_base.o
+				   pfunc_base.o udbg_scc.o udbg_adb.o
 obj-$(CONFIG_PMAC_BACKLIGHT)	+= backlight.o
 obj-$(CONFIG_CPU_FREQ_PMAC)	+= cpufreq_32.o
 obj-$(CONFIG_CPU_FREQ_PMAC64)	+= cpufreq_64.o
@@ -19,4 +19,3 @@ obj-$(CONFIG_NVRAM:m=y)		+= nvram.o
 obj-$(CONFIG_PPC64)		+= nvram.o
 obj-$(CONFIG_PPC32)		+= bootx_init.o
 obj-$(CONFIG_SMP)		+= smp.o
-obj-$(CONFIG_PPC_MERGE)		+= udbg_scc.o udbg_adb.o
diff --git a/arch/powerpc/platforms/powermac/setup.c b/arch/powerpc/platforms/powermac/setup.c
index 31635446901a..88ccf3a08a9c 100644
--- a/arch/powerpc/platforms/powermac/setup.c
+++ b/arch/powerpc/platforms/powermac/setup.c
@@ -541,6 +541,78 @@ static int __init pmac_declare_of_platform_devices(void)
 }
 machine_device_initcall(powermac, pmac_declare_of_platform_devices);
 
+#ifdef CONFIG_SERIAL_PMACZILOG_CONSOLE
+/*
+ * This is called very early, as part of console_init() (typically just after
+ * time_init()). This function is respondible for trying to find a good
+ * default console on serial ports. It tries to match the open firmware
+ * default output with one of the available serial console drivers.
+ */
+static int __init check_pmac_serial_console(void)
+{
+	struct device_node *prom_stdout = NULL;
+	int offset = 0;
+	const char *name;
+#ifdef CONFIG_SERIAL_PMACZILOG_TTYS
+	char *devname = "ttyS";
+#else
+	char *devname = "ttyPZ";
+#endif
+
+	pr_debug(" -> check_pmac_serial_console()\n");
+
+	/* The user has requested a console so this is already set up. */
+	if (strstr(boot_command_line, "console=")) {
+		pr_debug(" console was specified !\n");
+		return -EBUSY;
+	}
+
+	if (!of_chosen) {
+		pr_debug(" of_chosen is NULL !\n");
+		return -ENODEV;
+	}
+
+	/* We are getting a weird phandle from OF ... */
+	/* ... So use the full path instead */
+	name = of_get_property(of_chosen, "linux,stdout-path", NULL);
+	if (name == NULL) {
+		pr_debug(" no linux,stdout-path !\n");
+		return -ENODEV;
+	}
+	prom_stdout = of_find_node_by_path(name);
+	if (!prom_stdout) {
+		pr_debug(" can't find stdout package %s !\n", name);
+		return -ENODEV;
+	}
+	pr_debug("stdout is %s\n", prom_stdout->full_name);
+
+	name = of_get_property(prom_stdout, "name", NULL);
+	if (!name) {
+		pr_debug(" stdout package has no name !\n");
+		goto not_found;
+	}
+
+	if (strcmp(name, "ch-a") == 0)
+		offset = 0;
+	else if (strcmp(name, "ch-b") == 0)
+		offset = 1;
+	else
+		goto not_found;
+	of_node_put(prom_stdout);
+
+	pr_debug("Found serial console at %s%d\n", devname, offset);
+
+	return add_preferred_console(devname, offset, NULL);
+
+ not_found:
+	pr_debug("No preferred console found !\n");
+	of_node_put(prom_stdout);
+	return -ENODEV;
+}
+console_initcall(check_pmac_serial_console);
+
+#endif /* CONFIG_SERIAL_PMACZILOG_CONSOLE */
+
 /*
  * Called very early, MMU is off, device-tree isn't unflattened
  */
diff --git a/arch/powerpc/platforms/powermac/udbg_scc.c b/arch/powerpc/platforms/powermac/udbg_scc.c
index 47de4d3fc167..572771fd8463 100644
--- a/arch/powerpc/platforms/powermac/udbg_scc.c
+++ b/arch/powerpc/platforms/powermac/udbg_scc.c
@@ -125,13 +125,23 @@ void udbg_scc_init(int force_scc)
 	out_8(sccc, 0xc0);
 
 	/* If SCC was the OF output port, read the BRG value, else
-	 * Setup for 57600 8N1
+	 * Setup for 38400 or 57600 8N1 depending on the machine
 	 */
 	if (ch_def != NULL) {
 		out_8(sccc, 13);
 		scc_inittab[1] = in_8(sccc);
 		out_8(sccc, 12);
 		scc_inittab[3] = in_8(sccc);
+	} else if (machine_is_compatible("RackMac1,1")
+		   || machine_is_compatible("RackMac1,2")
+		   || machine_is_compatible("MacRISC4")) {
+		/* Xserves and G5s default to 57600 */
+		scc_inittab[1] = 0;
+		scc_inittab[3] = 0;
+	} else {
+		/* Others default to 38400 */
+		scc_inittab[1] = 0;
+		scc_inittab[3] = 1;
 	}
 
 	for (i = 0; i < sizeof(scc_inittab); ++i)
diff --git a/arch/powerpc/platforms/ps3/htab.c b/arch/powerpc/platforms/ps3/htab.c
index 1cf901fa9031..6eb1d4d182c9 100644
--- a/arch/powerpc/platforms/ps3/htab.c
+++ b/arch/powerpc/platforms/ps3/htab.c
@@ -29,138 +29,75 @@
 
 #include "platform.h"
 
-#if defined(DEBUG)
-#define DBG udbg_printf
-#else
-#define DBG pr_debug
-#endif
-
-static struct hash_pte *htab;
-static unsigned long htab_addr;
-static unsigned char *bolttab;
-static unsigned char *inusetab;
-
-static DEFINE_SPINLOCK(ps3_bolttab_lock);
-
-#define debug_dump_hpte(_a, _b, _c, _d, _e, _f, _g) \
-	_debug_dump_hpte(_a, _b, _c, _d, _e, _f, _g, __func__, __LINE__)
-static void _debug_dump_hpte(unsigned long pa, unsigned long va,
-	unsigned long group, unsigned long bitmap, struct hash_pte lhpte,
-	int psize, unsigned long slot, const char* func, int line)
-{
-	DBG("%s:%d: pa     = %lxh\n", func, line, pa);
-	DBG("%s:%d: lpar   = %lxh\n", func, line,
-		ps3_mm_phys_to_lpar(pa));
-	DBG("%s:%d: va     = %lxh\n", func, line, va);
-	DBG("%s:%d: group  = %lxh\n", func, line, group);
-	DBG("%s:%d: bitmap = %lxh\n", func, line, bitmap);
-	DBG("%s:%d: hpte.v = %lxh\n", func, line, lhpte.v);
-	DBG("%s:%d: hpte.r = %lxh\n", func, line, lhpte.r);
-	DBG("%s:%d: psize  = %xh\n", func, line, psize);
-	DBG("%s:%d: slot   = %lxh\n", func, line, slot);
-}
+/**
+ * enum lpar_vas_id - id of LPAR virtual address space.
+ * @lpar_vas_id_current: Current selected virtual address space
+ *
+ * Identify the target LPAR address space.
+ */
+
+enum ps3_lpar_vas_id {
+	PS3_LPAR_VAS_ID_CURRENT = 0,
+};
+
+
+static DEFINE_SPINLOCK(ps3_htab_lock);
 
 static long ps3_hpte_insert(unsigned long hpte_group, unsigned long va,
 	unsigned long pa, unsigned long rflags, unsigned long vflags,
 	int psize, int ssize)
 {
-	unsigned long slot;
-	struct hash_pte lhpte;
-	int secondary = 0;
-	unsigned long result;
-	unsigned long bitmap;
+	int result;
+	u64 hpte_v, hpte_r;
+	u64 inserted_index;
+	u64 evicted_v, evicted_r;
+	u64 hpte_v_array[4], hpte_rs;
 	unsigned long flags;
-	unsigned long p_pteg, s_pteg, b_index, b_mask, cb, ci;
-
-	vflags &= ~HPTE_V_SECONDARY; /* this bit is ignored */
-
-	lhpte.v = hpte_encode_v(va, psize, MMU_SEGSIZE_256M) |
-		vflags | HPTE_V_VALID;
-	lhpte.r = hpte_encode_r(ps3_mm_phys_to_lpar(pa), psize) | rflags;
-
-	p_pteg = hpte_group / HPTES_PER_GROUP;
-	s_pteg = ~p_pteg & htab_hash_mask;
-
-	spin_lock_irqsave(&ps3_bolttab_lock, flags);
-
-	BUG_ON(bolttab[p_pteg] == 0xff && bolttab[s_pteg] == 0xff);
+	long ret = -1;
 
-	bitmap = (inusetab[p_pteg] << 8) | inusetab[s_pteg];
+	/*
+	 * lv1_insert_htab_entry() will search for victim
+	 * entry in both primary and secondary pte group
+	 */
+	vflags &= ~HPTE_V_SECONDARY;
 
-	if (bitmap == 0xffff) {
-		/*
-		 * PTEG is full. Search for victim.
-		 */
-		bitmap &= ~((bolttab[p_pteg] << 8) | bolttab[s_pteg]);
-		do {
-			ci = mftb() & 15;
-			cb = 0x8000UL >> ci;
-		} while ((cb & bitmap) == 0);
-	} else {
-		/*
-		 * search free slot in hardware order
-		 *	[primary]	0, 2, 4, 6, 1, 3, 5, 7
-		 *	[secondary]	0, 2, 4, 6, 1, 3, 5, 7
-		 */
-		for (ci = 0; ci < HPTES_PER_GROUP; ci += 2) {
-			cb = 0x8000UL >> ci;
-			if ((cb & bitmap) == 0)
-				goto found;
-		}
-		for (ci = 1; ci < HPTES_PER_GROUP; ci += 2) {
-			cb = 0x8000UL >> ci;
-			if ((cb & bitmap) == 0)
-				goto found;
-		}
-		for (ci = HPTES_PER_GROUP; ci < HPTES_PER_GROUP*2; ci += 2) {
-			cb = 0x8000UL >> ci;
-			if ((cb & bitmap) == 0)
-				goto found;
-		}
-		for (ci = HPTES_PER_GROUP+1; ci < HPTES_PER_GROUP*2; ci += 2) {
-			cb = 0x8000UL >> ci;
-			if ((cb & bitmap) == 0)
-				goto found;
-		}
-	}
+	hpte_v = hpte_encode_v(va, psize, ssize) | vflags | HPTE_V_VALID;
+	hpte_r = hpte_encode_r(ps3_mm_phys_to_lpar(pa), psize) | rflags;
 
-found:
-	if (ci < HPTES_PER_GROUP) {
-		slot = p_pteg * HPTES_PER_GROUP + ci;
-	} else {
-		slot = s_pteg * HPTES_PER_GROUP + (ci & 7);
-		/* lhpte.dw0.dw0.h = 1; */
-		vflags |= HPTE_V_SECONDARY;
-		lhpte.v |= HPTE_V_SECONDARY;
-	}
+	spin_lock_irqsave(&ps3_htab_lock, flags);
 
-	result = lv1_write_htab_entry(0, slot, lhpte.v, lhpte.r);
+	/* talk hvc to replace entries BOLTED == 0 */
+	result = lv1_insert_htab_entry(PS3_LPAR_VAS_ID_CURRENT, hpte_group,
+				       hpte_v, hpte_r,
+				       HPTE_V_BOLTED, 0,
+				       &inserted_index,
+				       &evicted_v, &evicted_r);
 
 	if (result) {
-		debug_dump_hpte(pa, va, hpte_group, bitmap, lhpte, psize, slot);
+		/* all entries bolted !*/
+		pr_info("%s:result=%d va=%lx pa=%lx ix=%lx v=%lx r=%lx\n",
+			__func__, result, va, pa, hpte_group, hpte_v, hpte_r);
 		BUG();
 	}
 
 	/*
-	 * If used slot is not in primary HPTE group,
-	 * the slot should be in secondary HPTE group.
+	 * see if the entry is inserted into secondary pteg
 	 */
+	result = lv1_read_htab_entries(PS3_LPAR_VAS_ID_CURRENT,
+				       inserted_index & ~0x3UL,
+				       &hpte_v_array[0], &hpte_v_array[1],
+				       &hpte_v_array[2], &hpte_v_array[3],
+				       &hpte_rs);
+	BUG_ON(result);
 
-	if ((hpte_group ^ slot) & ~(HPTES_PER_GROUP - 1)) {
-		secondary = 1;
-		b_index = s_pteg;
-	} else {
-		secondary = 0;
-		b_index = p_pteg;
-	}
+	if (hpte_v_array[inserted_index % 4] & HPTE_V_SECONDARY)
+		ret = (inserted_index & 7) | (1 << 3);
+	else
+		ret = inserted_index & 7;
 
-	b_mask = (lhpte.v & HPTE_V_BOLTED) ? 1 << 7 : 0 << 7;
-	bolttab[b_index] |= b_mask >> (slot & 7);
-	b_mask = 1 << 7;
-	inusetab[b_index] |= b_mask >> (slot & 7);
-	spin_unlock_irqrestore(&ps3_bolttab_lock, flags);
+	spin_unlock_irqrestore(&ps3_htab_lock, flags);
 
-	return (slot & 7) | (secondary << 3);
+	return ret;
 }
 
 static long ps3_hpte_remove(unsigned long hpte_group)
@@ -172,39 +109,48 @@ static long ps3_hpte_remove(unsigned long hpte_group)
 static long ps3_hpte_updatepp(unsigned long slot, unsigned long newpp,
 	unsigned long va, int psize, int ssize, int local)
 {
+	int result;
+	u64 hpte_v, want_v, hpte_rs;
+	u64 hpte_v_array[4];
 	unsigned long flags;
-	unsigned long result;
-	unsigned long pteg, bit;
-	unsigned long hpte_v, want_v;
+	long ret;
 
-	want_v = hpte_encode_v(va, psize, MMU_SEGSIZE_256M);
+	want_v = hpte_encode_v(va, psize, ssize);
 
-	spin_lock_irqsave(&ps3_bolttab_lock, flags);
+	spin_lock_irqsave(&ps3_htab_lock, flags);
 
-	hpte_v = htab[slot].v;
-	if (!HPTE_V_COMPARE(hpte_v, want_v) || !(hpte_v & HPTE_V_VALID)) {
-		spin_unlock_irqrestore(&ps3_bolttab_lock, flags);
-
-		/* ps3_hpte_insert() will be used to update PTE */
-		return -1;
-	}
-
-	result = lv1_write_htab_entry(0, slot, 0, 0);
+	result = lv1_read_htab_entries(PS3_LPAR_VAS_ID_CURRENT, slot & ~0x3UL,
+				       &hpte_v_array[0], &hpte_v_array[1],
+				       &hpte_v_array[2], &hpte_v_array[3],
+				       &hpte_rs);
 
 	if (result) {
-		DBG("%s: va=%lx slot=%lx psize=%d result = %ld (0x%lx)\n",
-		       __func__, va, slot, psize, result, result);
+		pr_info("%s: res=%d read va=%lx slot=%lx psize=%d\n",
+			__func__, result, va, slot, psize);
 		BUG();
 	}
 
-	pteg = slot / HPTES_PER_GROUP;
-	bit = slot % HPTES_PER_GROUP;
-	inusetab[pteg] &= ~(0x80 >> bit);
+	hpte_v = hpte_v_array[slot % 4];
 
-	spin_unlock_irqrestore(&ps3_bolttab_lock, flags);
+	/*
+	 * As lv1_read_htab_entries() does not give us the RPN, we can
+	 * not synthesize the new hpte_r value here, and therefore can
+	 * not update the hpte with lv1_insert_htab_entry(), so we
+	 * insted invalidate it and ask the caller to update it via
+	 * ps3_hpte_insert() by returning a -1 value.
+	 */
+	if (!HPTE_V_COMPARE(hpte_v, want_v) || !(hpte_v & HPTE_V_VALID)) {
+		/* not found */
+		ret = -1;
+	} else {
+		/* entry found, just invalidate it */
+		result = lv1_write_htab_entry(PS3_LPAR_VAS_ID_CURRENT,
+					      slot, 0, 0);
+		ret = -1;
+	}
 
-	/* ps3_hpte_insert() will be used to update PTE */
-	return -1;
+	spin_unlock_irqrestore(&ps3_htab_lock, flags);
+	return ret;
 }
 
 static void ps3_hpte_updateboltedpp(unsigned long newpp, unsigned long ea,
@@ -217,45 +163,35 @@ static void ps3_hpte_invalidate(unsigned long slot, unsigned long va,
 	int psize, int ssize, int local)
 {
 	unsigned long flags;
-	unsigned long result;
-	unsigned long pteg, bit;
+	int result;
+
+	spin_lock_irqsave(&ps3_htab_lock, flags);
 
-	spin_lock_irqsave(&ps3_bolttab_lock, flags);
-	result = lv1_write_htab_entry(0, slot, 0, 0);
+	result = lv1_write_htab_entry(PS3_LPAR_VAS_ID_CURRENT, slot, 0, 0);
 
 	if (result) {
-		DBG("%s: va=%lx slot=%lx psize=%d result = %ld (0x%lx)\n",
-		       __func__, va, slot, psize, result, result);
+		pr_info("%s: res=%d va=%lx slot=%lx psize=%d\n",
+			__func__, result, va, slot, psize);
 		BUG();
 	}
 
-	pteg = slot / HPTES_PER_GROUP;
-	bit = slot % HPTES_PER_GROUP;
-	inusetab[pteg] &= ~(0x80 >> bit);
-	spin_unlock_irqrestore(&ps3_bolttab_lock, flags);
+	spin_unlock_irqrestore(&ps3_htab_lock, flags);
 }
 
 static void ps3_hpte_clear(void)
 {
-	int result;
-
-	DBG(" -> %s:%d\n", __func__, __LINE__);
+	unsigned long hpte_count = (1UL << ppc64_pft_size) >> 4;
+	u64 i;
 
-	result = lv1_unmap_htab(htab_addr);
-	BUG_ON(result);
+	for (i = 0; i < hpte_count; i++)
+		lv1_write_htab_entry(PS3_LPAR_VAS_ID_CURRENT, i, 0, 0);
 
 	ps3_mm_shutdown();
 	ps3_mm_vas_destroy();
-
-	DBG(" <- %s:%d\n", __func__, __LINE__);
 }
 
 void __init ps3_hpte_init(unsigned long htab_size)
 {
-	long bitmap_size;
-
-	DBG(" -> %s:%d\n", __func__, __LINE__);
-
 	ppc_md.hpte_invalidate = ps3_hpte_invalidate;
 	ppc_md.hpte_updatepp = ps3_hpte_updatepp;
 	ppc_md.hpte_updateboltedpp = ps3_hpte_updateboltedpp;
@@ -264,28 +200,5 @@ void __init ps3_hpte_init(unsigned long htab_size)
 	ppc_md.hpte_clear_all = ps3_hpte_clear;
 
 	ppc64_pft_size = __ilog2(htab_size);
-
-	bitmap_size = htab_size / sizeof(struct hash_pte) / 8;
-
-	bolttab = __va(lmb_alloc(bitmap_size, 1));
-	inusetab = __va(lmb_alloc(bitmap_size, 1));
-
-	memset(bolttab, 0, bitmap_size);
-	memset(inusetab, 0, bitmap_size);
-
-	DBG(" <- %s:%d\n", __func__, __LINE__);
 }
 
-void __init ps3_map_htab(void)
-{
-	long result;
-	unsigned long htab_size = (1UL << ppc64_pft_size);
-
-	result = lv1_map_htab(0, &htab_addr);
-
-	htab = (__force struct hash_pte *)ioremap_flags(htab_addr, htab_size,
-					    pgprot_val(PAGE_READONLY_X));
-
-	DBG("%s:%d: lpar %016lxh, virt %016lxh\n", __func__, __LINE__,
-		htab_addr, (unsigned long)htab);
-}
diff --git a/arch/powerpc/platforms/ps3/setup.c b/arch/powerpc/platforms/ps3/setup.c
index a413abbd4123..77bc330263c4 100644
--- a/arch/powerpc/platforms/ps3/setup.c
+++ b/arch/powerpc/platforms/ps3/setup.c
@@ -201,7 +201,6 @@ static void __init ps3_setup_arch(void)
 	       ps3_firmware_version.rev);
 
 	ps3_spu_set_platform();
-	ps3_map_htab();
 
 #ifdef CONFIG_SMP
 	smp_init_ps3();
diff --git a/arch/powerpc/platforms/ps3/spu.c b/arch/powerpc/platforms/ps3/spu.c
index d135cef9ed6a..ccae3d446b98 100644
--- a/arch/powerpc/platforms/ps3/spu.c
+++ b/arch/powerpc/platforms/ps3/spu.c
@@ -186,14 +186,24 @@ static void spu_unmap(struct spu *spu)
 	iounmap(spu_pdata(spu)->shadow);
 }
 
+/**
+ * setup_areas - Map the spu regions into the address space.
+ *
+ * The current HV requires the spu shadow regs to be mapped with the
+ * PTE page protection bits set as read-only (PP=3).  This implementation
+ * uses the low level __ioremap() to bypass the page protection settings
+ * inforced by ioremap_flags() to get the needed PTE bits set for the
+ * shadow regs.
+ */
+
 static int __init setup_areas(struct spu *spu)
 {
 	struct table {char* name; unsigned long addr; unsigned long size;};
+	static const unsigned long shadow_flags = _PAGE_NO_CACHE | 3;
 
-	spu_pdata(spu)->shadow = ioremap_flags(spu_pdata(spu)->shadow_addr,
-					       sizeof(struct spe_shadow),
-					       pgprot_val(PAGE_READONLY) |
-					       _PAGE_NO_CACHE);
+	spu_pdata(spu)->shadow = __ioremap(spu_pdata(spu)->shadow_addr,
+					   sizeof(struct spe_shadow),
+					   shadow_flags);
 	if (!spu_pdata(spu)->shadow) {
 		pr_debug("%s:%d: ioremap shadow failed\n", __func__, __LINE__);
 		goto fail_ioremap;
diff --git a/arch/powerpc/platforms/pseries/Kconfig b/arch/powerpc/platforms/pseries/Kconfig
index 757c0296e0b8..97619fd51e39 100644
--- a/arch/powerpc/platforms/pseries/Kconfig
+++ b/arch/powerpc/platforms/pseries/Kconfig
@@ -40,3 +40,26 @@ config PPC_PSERIES_DEBUG
 	depends on PPC_PSERIES && PPC_EARLY_DEBUG
 	bool "Enable extra debug logging in platforms/pseries"
 	default y
+
+config PPC_SMLPAR
+	bool "Support for shared-memory logical partitions"
+	depends on PPC_PSERIES
+	select LPARCFG
+	default n
+	help
+	  Select this option to enable shared memory partition support.
+	  With this option a system running in an LPAR can be given more
+	  memory than physically available and will allow firmware to
+	  balance memory across many LPARs.
+
+config CMM
+	tristate "Collaborative memory management"
+	depends on PPC_SMLPAR
+	default y
+	help
+	  Select this option, if you want to enable the kernel interface
+	  to reduce the memory size of the system. This is accomplished
+	  by allocating pages of memory and put them "on hold". This only
+	  makes sense for a system running in an LPAR where the unused pages
+	  will be reused for other LPARs. The interface allows firmware to
+	  balance memory across many LPARs.
diff --git a/arch/powerpc/platforms/pseries/Makefile b/arch/powerpc/platforms/pseries/Makefile
index 554c6e42ef2a..dfe574af2dc0 100644
--- a/arch/powerpc/platforms/pseries/Makefile
+++ b/arch/powerpc/platforms/pseries/Makefile
@@ -24,3 +24,4 @@ obj-$(CONFIG_HVC_CONSOLE)	+= hvconsole.o
 obj-$(CONFIG_HVCS)		+= hvcserver.o
 obj-$(CONFIG_HCALL_STATS)	+= hvCall_inst.o
 obj-$(CONFIG_PHYP_DUMP)	+= phyp_dump.o
+obj-$(CONFIG_CMM)		+= cmm.o
diff --git a/arch/powerpc/platforms/pseries/cmm.c b/arch/powerpc/platforms/pseries/cmm.c
new file mode 100644
index 000000000000..38fe32a7cc70
--- /dev/null
+++ b/arch/powerpc/platforms/pseries/cmm.c
@@ -0,0 +1,472 @@
+/*
+ * Collaborative memory management interface.
+ *
+ * Copyright (C) 2008 IBM Corporation
+ * Author(s): Brian King (brking@linux.vnet.ibm.com),
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ *
+ */
+
+#include <linux/ctype.h>
+#include <linux/delay.h>
+#include <linux/errno.h>
+#include <linux/fs.h>
+#include <linux/init.h>
+#include <linux/kthread.h>
+#include <linux/module.h>
+#include <linux/oom.h>
+#include <linux/sched.h>
+#include <linux/stringify.h>
+#include <linux/swap.h>
+#include <linux/sysdev.h>
+#include <asm/firmware.h>
+#include <asm/hvcall.h>
+#include <asm/mmu.h>
+#include <asm/pgalloc.h>
+#include <asm/uaccess.h>
+
+#include "plpar_wrappers.h"
+
+#define CMM_DRIVER_VERSION	"1.0.0"
+#define CMM_DEFAULT_DELAY	1
+#define CMM_DEBUG			0
+#define CMM_DISABLE		0
+#define CMM_OOM_KB		1024
+#define CMM_MIN_MEM_MB		256
+#define KB2PAGES(_p)		((_p)>>(PAGE_SHIFT-10))
+#define PAGES2KB(_p)		((_p)<<(PAGE_SHIFT-10))
+
+static unsigned int delay = CMM_DEFAULT_DELAY;
+static unsigned int oom_kb = CMM_OOM_KB;
+static unsigned int cmm_debug = CMM_DEBUG;
+static unsigned int cmm_disabled = CMM_DISABLE;
+static unsigned long min_mem_mb = CMM_MIN_MEM_MB;
+static struct sys_device cmm_sysdev;
+
+MODULE_AUTHOR("Brian King <brking@linux.vnet.ibm.com>");
+MODULE_DESCRIPTION("IBM System p Collaborative Memory Manager");
+MODULE_LICENSE("GPL");
+MODULE_VERSION(CMM_DRIVER_VERSION);
+
+module_param_named(delay, delay, uint, S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(delay, "Delay (in seconds) between polls to query hypervisor paging requests. "
+		 "[Default=" __stringify(CMM_DEFAULT_DELAY) "]");
+module_param_named(oom_kb, oom_kb, uint, S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(oom_kb, "Amount of memory in kb to free on OOM. "
+		 "[Default=" __stringify(CMM_OOM_KB) "]");
+module_param_named(min_mem_mb, min_mem_mb, ulong, S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(min_mem_mb, "Minimum amount of memory (in MB) to not balloon. "
+		 "[Default=" __stringify(CMM_MIN_MEM_MB) "]");
+module_param_named(debug, cmm_debug, uint, S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(debug, "Enable module debugging logging. Set to 1 to enable. "
+		 "[Default=" __stringify(CMM_DEBUG) "]");
+
+#define CMM_NR_PAGES ((PAGE_SIZE - sizeof(void *) - sizeof(unsigned long)) / sizeof(unsigned long))
+
+#define cmm_dbg(...) if (cmm_debug) { printk(KERN_INFO "cmm: "__VA_ARGS__); }
+
+struct cmm_page_array {
+	struct cmm_page_array *next;
+	unsigned long index;
+	unsigned long page[CMM_NR_PAGES];
+};
+
+static unsigned long loaned_pages;
+static unsigned long loaned_pages_target;
+static unsigned long oom_freed_pages;
+
+static struct cmm_page_array *cmm_page_list;
+static DEFINE_SPINLOCK(cmm_lock);
+
+static struct task_struct *cmm_thread_ptr;
+
+/**
+ * cmm_alloc_pages - Allocate pages and mark them as loaned
+ * @nr:	number of pages to allocate
+ *
+ * Return value:
+ * 	number of pages requested to be allocated which were not
+ **/
+static long cmm_alloc_pages(long nr)
+{
+	struct cmm_page_array *pa, *npa;
+	unsigned long addr;
+	long rc;
+
+	cmm_dbg("Begin request for %ld pages\n", nr);
+
+	while (nr) {
+		addr = __get_free_page(GFP_NOIO | __GFP_NOWARN |
+				       __GFP_NORETRY | __GFP_NOMEMALLOC);
+		if (!addr)
+			break;
+		spin_lock(&cmm_lock);
+		pa = cmm_page_list;
+		if (!pa || pa->index >= CMM_NR_PAGES) {
+			/* Need a new page for the page list. */
+			spin_unlock(&cmm_lock);
+			npa = (struct cmm_page_array *)__get_free_page(GFP_NOIO | __GFP_NOWARN |
+								       __GFP_NORETRY | __GFP_NOMEMALLOC);
+			if (!npa) {
+				pr_info("%s: Can not allocate new page list\n", __FUNCTION__);
+				free_page(addr);
+				break;
+			}
+			spin_lock(&cmm_lock);
+			pa = cmm_page_list;
+
+			if (!pa || pa->index >= CMM_NR_PAGES) {
+				npa->next = pa;
+				npa->index = 0;
+				pa = npa;
+				cmm_page_list = pa;
+			} else
+				free_page((unsigned long) npa);
+		}
+
+		if ((rc = plpar_page_set_loaned(__pa(addr)))) {
+			pr_err("%s: Can not set page to loaned. rc=%ld\n", __FUNCTION__, rc);
+			spin_unlock(&cmm_lock);
+			free_page(addr);
+			break;
+		}
+
+		pa->page[pa->index++] = addr;
+		loaned_pages++;
+		totalram_pages--;
+		spin_unlock(&cmm_lock);
+		nr--;
+	}
+
+	cmm_dbg("End request with %ld pages unfulfilled\n", nr);
+	return nr;
+}
+
+/**
+ * cmm_free_pages - Free pages and mark them as active
+ * @nr:	number of pages to free
+ *
+ * Return value:
+ * 	number of pages requested to be freed which were not
+ **/
+static long cmm_free_pages(long nr)
+{
+	struct cmm_page_array *pa;
+	unsigned long addr;
+
+	cmm_dbg("Begin free of %ld pages.\n", nr);
+	spin_lock(&cmm_lock);
+	pa = cmm_page_list;
+	while (nr) {
+		if (!pa || pa->index <= 0)
+			break;
+		addr = pa->page[--pa->index];
+
+		if (pa->index == 0) {
+			pa = pa->next;
+			free_page((unsigned long) cmm_page_list);
+			cmm_page_list = pa;
+		}
+
+		plpar_page_set_active(__pa(addr));
+		free_page(addr);
+		loaned_pages--;
+		nr--;
+		totalram_pages++;
+	}
+	spin_unlock(&cmm_lock);
+	cmm_dbg("End request with %ld pages unfulfilled\n", nr);
+	return nr;
+}
+
+/**
+ * cmm_oom_notify - OOM notifier
+ * @self:	notifier block struct
+ * @dummy:	not used
+ * @parm:	returned - number of pages freed
+ *
+ * Return value:
+ * 	NOTIFY_OK
+ **/
+static int cmm_oom_notify(struct notifier_block *self,
+			  unsigned long dummy, void *parm)
+{
+	unsigned long *freed = parm;
+	long nr = KB2PAGES(oom_kb);
+
+	cmm_dbg("OOM processing started\n");
+	nr = cmm_free_pages(nr);
+	loaned_pages_target = loaned_pages;
+	*freed += KB2PAGES(oom_kb) - nr;
+	oom_freed_pages += KB2PAGES(oom_kb) - nr;
+	cmm_dbg("OOM processing complete\n");
+	return NOTIFY_OK;
+}
+
+/**
+ * cmm_get_mpp - Read memory performance parameters
+ *
+ * Makes hcall to query the current page loan request from the hypervisor.
+ *
+ * Return value:
+ * 	nothing
+ **/
+static void cmm_get_mpp(void)
+{
+	int rc;
+	struct hvcall_mpp_data mpp_data;
+	unsigned long active_pages_target;
+	signed long page_loan_request;
+
+	rc = h_get_mpp(&mpp_data);
+
+	if (rc != H_SUCCESS)
+		return;
+
+	page_loan_request = div_s64((s64)mpp_data.loan_request, PAGE_SIZE);
+	loaned_pages_target = page_loan_request + loaned_pages;
+	if (loaned_pages_target > oom_freed_pages)
+		loaned_pages_target -= oom_freed_pages;
+	else
+		loaned_pages_target = 0;
+
+	active_pages_target = totalram_pages + loaned_pages - loaned_pages_target;
+
+	if ((min_mem_mb * 1024 * 1024) > (active_pages_target * PAGE_SIZE))
+		loaned_pages_target = totalram_pages + loaned_pages -
+			((min_mem_mb * 1024 * 1024) / PAGE_SIZE);
+
+	cmm_dbg("delta = %ld, loaned = %lu, target = %lu, oom = %lu, totalram = %lu\n",
+		page_loan_request, loaned_pages, loaned_pages_target,
+		oom_freed_pages, totalram_pages);
+}
+
+static struct notifier_block cmm_oom_nb = {
+	.notifier_call = cmm_oom_notify
+};
+
+/**
+ * cmm_thread - CMM task thread
+ * @dummy:	not used
+ *
+ * Return value:
+ * 	0
+ **/
+static int cmm_thread(void *dummy)
+{
+	unsigned long timeleft;
+
+	while (1) {
+		timeleft = msleep_interruptible(delay * 1000);
+
+		if (kthread_should_stop() || timeleft) {
+			loaned_pages_target = loaned_pages;
+			break;
+		}
+
+		cmm_get_mpp();
+
+		if (loaned_pages_target > loaned_pages) {
+			if (cmm_alloc_pages(loaned_pages_target - loaned_pages))
+				loaned_pages_target = loaned_pages;
+		} else if (loaned_pages_target < loaned_pages)
+			cmm_free_pages(loaned_pages - loaned_pages_target);
+	}
+	return 0;
+}
+
+#define CMM_SHOW(name, format, args...)			\
+	static ssize_t show_##name(struct sys_device *dev,	\
+				   struct sysdev_attribute *attr,	\
+				   char *buf)			\
+	{							\
+		return sprintf(buf, format, ##args);		\
+	}							\
+	static SYSDEV_ATTR(name, S_IRUGO, show_##name, NULL)
+
+CMM_SHOW(loaned_kb, "%lu\n", PAGES2KB(loaned_pages));
+CMM_SHOW(loaned_target_kb, "%lu\n", PAGES2KB(loaned_pages_target));
+
+static ssize_t show_oom_pages(struct sys_device *dev,
+			      struct sysdev_attribute *attr, char *buf)
+{
+	return sprintf(buf, "%lu\n", PAGES2KB(oom_freed_pages));
+}
+
+static ssize_t store_oom_pages(struct sys_device *dev,
+			       struct sysdev_attribute *attr,
+			       const char *buf, size_t count)
+{
+	unsigned long val = simple_strtoul (buf, NULL, 10);
+
+	if (!capable(CAP_SYS_ADMIN))
+		return -EPERM;
+	if (val != 0)
+		return -EBADMSG;
+
+	oom_freed_pages = 0;
+	return count;
+}
+
+static SYSDEV_ATTR(oom_freed_kb, S_IWUSR| S_IRUGO,
+		   show_oom_pages, store_oom_pages);
+
+static struct sysdev_attribute *cmm_attrs[] = {
+	&attr_loaned_kb,
+	&attr_loaned_target_kb,
+	&attr_oom_freed_kb,
+};
+
+static struct sysdev_class cmm_sysdev_class = {
+	.name = "cmm",
+};
+
+/**
+ * cmm_sysfs_register - Register with sysfs
+ *
+ * Return value:
+ * 	0 on success / other on failure
+ **/
+static int cmm_sysfs_register(struct sys_device *sysdev)
+{
+	int i, rc;
+
+	if ((rc = sysdev_class_register(&cmm_sysdev_class)))
+		return rc;
+
+	sysdev->id = 0;
+	sysdev->cls = &cmm_sysdev_class;
+
+	if ((rc = sysdev_register(sysdev)))
+		goto class_unregister;
+
+	for (i = 0; i < ARRAY_SIZE(cmm_attrs); i++) {
+		if ((rc = sysdev_create_file(sysdev, cmm_attrs[i])))
+			goto fail;
+	}
+
+	return 0;
+
+fail:
+	while (--i >= 0)
+		sysdev_remove_file(sysdev, cmm_attrs[i]);
+	sysdev_unregister(sysdev);
+class_unregister:
+	sysdev_class_unregister(&cmm_sysdev_class);
+	return rc;
+}
+
+/**
+ * cmm_unregister_sysfs - Unregister from sysfs
+ *
+ **/
+static void cmm_unregister_sysfs(struct sys_device *sysdev)
+{
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(cmm_attrs); i++)
+		sysdev_remove_file(sysdev, cmm_attrs[i]);
+	sysdev_unregister(sysdev);
+	sysdev_class_unregister(&cmm_sysdev_class);
+}
+
+/**
+ * cmm_init - Module initialization
+ *
+ * Return value:
+ * 	0 on success / other on failure
+ **/
+static int cmm_init(void)
+{
+	int rc = -ENOMEM;
+
+	if (!firmware_has_feature(FW_FEATURE_CMO))
+		return -EOPNOTSUPP;
+
+	if ((rc = register_oom_notifier(&cmm_oom_nb)) < 0)
+		return rc;
+
+	if ((rc = cmm_sysfs_register(&cmm_sysdev)))
+		goto out_oom_notifier;
+
+	if (cmm_disabled)
+		return rc;
+
+	cmm_thread_ptr = kthread_run(cmm_thread, NULL, "cmmthread");
+	if (IS_ERR(cmm_thread_ptr)) {
+		rc = PTR_ERR(cmm_thread_ptr);
+		goto out_unregister_sysfs;
+	}
+
+	return rc;
+
+out_unregister_sysfs:
+	cmm_unregister_sysfs(&cmm_sysdev);
+out_oom_notifier:
+	unregister_oom_notifier(&cmm_oom_nb);
+	return rc;
+}
+
+/**
+ * cmm_exit - Module exit
+ *
+ * Return value:
+ * 	nothing
+ **/
+static void cmm_exit(void)
+{
+	if (cmm_thread_ptr)
+		kthread_stop(cmm_thread_ptr);
+	unregister_oom_notifier(&cmm_oom_nb);
+	cmm_free_pages(loaned_pages);
+	cmm_unregister_sysfs(&cmm_sysdev);
+}
+
+/**
+ * cmm_set_disable - Disable/Enable CMM
+ *
+ * Return value:
+ * 	0 on success / other on failure
+ **/
+static int cmm_set_disable(const char *val, struct kernel_param *kp)
+{
+	int disable = simple_strtoul(val, NULL, 10);
+
+	if (disable != 0 && disable != 1)
+		return -EINVAL;
+
+	if (disable && !cmm_disabled) {
+		if (cmm_thread_ptr)
+			kthread_stop(cmm_thread_ptr);
+		cmm_thread_ptr = NULL;
+		cmm_free_pages(loaned_pages);
+	} else if (!disable && cmm_disabled) {
+		cmm_thread_ptr = kthread_run(cmm_thread, NULL, "cmmthread");
+		if (IS_ERR(cmm_thread_ptr))
+			return PTR_ERR(cmm_thread_ptr);
+	}
+
+	cmm_disabled = disable;
+	return 0;
+}
+
+module_param_call(disable, cmm_set_disable, param_get_uint,
+		  &cmm_disabled, S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(disable, "Disable CMM. Set to 1 to disable. "
+		 "[Default=" __stringify(CMM_DISABLE) "]");
+
+module_init(cmm_init);
+module_exit(cmm_exit);
diff --git a/arch/powerpc/platforms/pseries/iommu.c b/arch/powerpc/platforms/pseries/iommu.c
index 5377dd4b849a..a8c446697f9e 100644
--- a/arch/powerpc/platforms/pseries/iommu.c
+++ b/arch/powerpc/platforms/pseries/iommu.c
@@ -48,7 +48,7 @@
 #include "plpar_wrappers.h"
 
 
-static void tce_build_pSeries(struct iommu_table *tbl, long index,
+static int tce_build_pSeries(struct iommu_table *tbl, long index,
 			      long npages, unsigned long uaddr,
 			      enum dma_data_direction direction,
 			      struct dma_attrs *attrs)
@@ -72,6 +72,7 @@ static void tce_build_pSeries(struct iommu_table *tbl, long index,
 		uaddr += TCE_PAGE_SIZE;
 		tcep++;
 	}
+	return 0;
 }
 
 
@@ -94,14 +95,19 @@ static unsigned long tce_get_pseries(struct iommu_table *tbl, long index)
 	return *tcep;
 }
 
-static void tce_build_pSeriesLP(struct iommu_table *tbl, long tcenum,
+static void tce_free_pSeriesLP(struct iommu_table*, long, long);
+static void tce_freemulti_pSeriesLP(struct iommu_table*, long, long);
+
+static int tce_build_pSeriesLP(struct iommu_table *tbl, long tcenum,
 				long npages, unsigned long uaddr,
 				enum dma_data_direction direction,
 				struct dma_attrs *attrs)
 {
-	u64 rc;
+	u64 rc = 0;
 	u64 proto_tce, tce;
 	u64 rpn;
+	int ret = 0;
+	long tcenum_start = tcenum, npages_start = npages;
 
 	rpn = (virt_to_abs(uaddr)) >> TCE_SHIFT;
 	proto_tce = TCE_PCI_READ;
@@ -112,6 +118,13 @@ static void tce_build_pSeriesLP(struct iommu_table *tbl, long tcenum,
 		tce = proto_tce | (rpn & TCE_RPN_MASK) << TCE_RPN_SHIFT;
 		rc = plpar_tce_put((u64)tbl->it_index, (u64)tcenum << 12, tce);
 
+		if (unlikely(rc == H_NOT_ENOUGH_RESOURCES)) {
+			ret = (int)rc;
+			tce_free_pSeriesLP(tbl, tcenum_start,
+			                   (npages_start - (npages + 1)));
+			break;
+		}
+
 		if (rc && printk_ratelimit()) {
 			printk("tce_build_pSeriesLP: plpar_tce_put failed. rc=%ld\n", rc);
 			printk("\tindex   = 0x%lx\n", (u64)tbl->it_index);
@@ -123,25 +136,27 @@ static void tce_build_pSeriesLP(struct iommu_table *tbl, long tcenum,
 		tcenum++;
 		rpn++;
 	}
+	return ret;
 }
 
 static DEFINE_PER_CPU(u64 *, tce_page) = NULL;
 
-static void tce_buildmulti_pSeriesLP(struct iommu_table *tbl, long tcenum,
+static int tce_buildmulti_pSeriesLP(struct iommu_table *tbl, long tcenum,
 				     long npages, unsigned long uaddr,
 				     enum dma_data_direction direction,
 				     struct dma_attrs *attrs)
 {
-	u64 rc;
+	u64 rc = 0;
 	u64 proto_tce;
 	u64 *tcep;
 	u64 rpn;
 	long l, limit;
+	long tcenum_start = tcenum, npages_start = npages;
+	int ret = 0;
 
 	if (npages == 1) {
-		tce_build_pSeriesLP(tbl, tcenum, npages, uaddr,
-				    direction, attrs);
-		return;
+		return tce_build_pSeriesLP(tbl, tcenum, npages, uaddr,
+		                           direction, attrs);
 	}
 
 	tcep = __get_cpu_var(tce_page);
@@ -153,9 +168,8 @@ static void tce_buildmulti_pSeriesLP(struct iommu_table *tbl, long tcenum,
 		tcep = (u64 *)__get_free_page(GFP_ATOMIC);
 		/* If allocation fails, fall back to the loop implementation */
 		if (!tcep) {
-			tce_build_pSeriesLP(tbl, tcenum, npages, uaddr,
+			return tce_build_pSeriesLP(tbl, tcenum, npages, uaddr,
 					    direction, attrs);
-			return;
 		}
 		__get_cpu_var(tce_page) = tcep;
 	}
@@ -187,6 +201,13 @@ static void tce_buildmulti_pSeriesLP(struct iommu_table *tbl, long tcenum,
 		tcenum += limit;
 	} while (npages > 0 && !rc);
 
+	if (unlikely(rc == H_NOT_ENOUGH_RESOURCES)) {
+		ret = (int)rc;
+		tce_freemulti_pSeriesLP(tbl, tcenum_start,
+		                        (npages_start - (npages + limit)));
+		return ret;
+	}
+
 	if (rc && printk_ratelimit()) {
 		printk("tce_buildmulti_pSeriesLP: plpar_tce_put failed. rc=%ld\n", rc);
 		printk("\tindex   = 0x%lx\n", (u64)tbl->it_index);
@@ -194,6 +215,7 @@ static void tce_buildmulti_pSeriesLP(struct iommu_table *tbl, long tcenum,
 		printk("\ttce[0] val = 0x%lx\n", tcep[0]);
 		show_stack(current, (unsigned long *)__get_SP());
 	}
+	return ret;
 }
 
 static void tce_free_pSeriesLP(struct iommu_table *tbl, long tcenum, long npages)
diff --git a/arch/powerpc/platforms/pseries/plpar_wrappers.h b/arch/powerpc/platforms/pseries/plpar_wrappers.h
index d8680b589dc9..d967c1893ab5 100644
--- a/arch/powerpc/platforms/pseries/plpar_wrappers.h
+++ b/arch/powerpc/platforms/pseries/plpar_wrappers.h
@@ -2,6 +2,7 @@
 #define _PSERIES_PLPAR_WRAPPERS_H
 
 #include <asm/hvcall.h>
+#include <asm/page.h>
 
 static inline long poll_pending(void)
 {
@@ -42,6 +43,38 @@ static inline long register_slb_shadow(unsigned long cpu, unsigned long vpa)
 	return vpa_call(0x3, cpu, vpa);
 }
 
+static inline long plpar_page_set_loaned(unsigned long vpa)
+{
+	unsigned long cmo_page_sz = cmo_get_page_size();
+	long rc = 0;
+	int i;
+
+	for (i = 0; !rc && i < PAGE_SIZE; i += cmo_page_sz)
+		rc = plpar_hcall_norets(H_PAGE_INIT, H_PAGE_SET_LOANED, vpa + i, 0);
+
+	for (i -= cmo_page_sz; rc && i != 0; i -= cmo_page_sz)
+		plpar_hcall_norets(H_PAGE_INIT, H_PAGE_SET_ACTIVE,
+				   vpa + i - cmo_page_sz, 0);
+
+	return rc;
+}
+
+static inline long plpar_page_set_active(unsigned long vpa)
+{
+	unsigned long cmo_page_sz = cmo_get_page_size();
+	long rc = 0;
+	int i;
+
+	for (i = 0; !rc && i < PAGE_SIZE; i += cmo_page_sz)
+		rc = plpar_hcall_norets(H_PAGE_INIT, H_PAGE_SET_ACTIVE, vpa + i, 0);
+
+	for (i -= cmo_page_sz; rc && i != 0; i -= cmo_page_sz)
+		plpar_hcall_norets(H_PAGE_INIT, H_PAGE_SET_LOANED,
+				   vpa + i - cmo_page_sz, 0);
+
+	return rc;
+}
+
 extern void vpa_init(int cpu);
 
 static inline long plpar_pte_enter(unsigned long flags,
diff --git a/arch/powerpc/platforms/pseries/setup.c b/arch/powerpc/platforms/pseries/setup.c
index 90beb444e1dd..7b01d67b4e48 100644
--- a/arch/powerpc/platforms/pseries/setup.c
+++ b/arch/powerpc/platforms/pseries/setup.c
@@ -68,6 +68,10 @@
 #include "plpar_wrappers.h"
 #include "pseries.h"
 
+int CMO_PrPSP = -1;
+int CMO_SecPSP = -1;
+unsigned long CMO_PageSize = (ASM_CONST(1) << IOMMU_PAGE_SHIFT);
+EXPORT_SYMBOL(CMO_PageSize);
 
 int fwnmi_active;  /* TRUE if an FWNMI handler is present */
 
@@ -314,6 +318,85 @@ static int pseries_set_xdabr(unsigned long dabr)
 			H_DABRX_KERNEL | H_DABRX_USER);
 }
 
+#define CMO_CHARACTERISTICS_TOKEN 44
+#define CMO_MAXLENGTH 1026
+
+/**
+ * fw_cmo_feature_init - FW_FEATURE_CMO is not stored in ibm,hypertas-functions,
+ * handle that here. (Stolen from parse_system_parameter_string)
+ */
+void pSeries_cmo_feature_init(void)
+{
+	char *ptr, *key, *value, *end;
+	int call_status;
+	int page_order = IOMMU_PAGE_SHIFT;
+
+	pr_debug(" -> fw_cmo_feature_init()\n");
+	spin_lock(&rtas_data_buf_lock);
+	memset(rtas_data_buf, 0, RTAS_DATA_BUF_SIZE);
+	call_status = rtas_call(rtas_token("ibm,get-system-parameter"), 3, 1,
+				NULL,
+				CMO_CHARACTERISTICS_TOKEN,
+				__pa(rtas_data_buf),
+				RTAS_DATA_BUF_SIZE);
+
+	if (call_status != 0) {
+		spin_unlock(&rtas_data_buf_lock);
+		pr_debug("CMO not available\n");
+		pr_debug(" <- fw_cmo_feature_init()\n");
+		return;
+	}
+
+	end = rtas_data_buf + CMO_MAXLENGTH - 2;
+	ptr = rtas_data_buf + 2;	/* step over strlen value */
+	key = value = ptr;
+
+	while (*ptr && (ptr <= end)) {
+		/* Separate the key and value by replacing '=' with '\0' and
+		 * point the value at the string after the '='
+		 */
+		if (ptr[0] == '=') {
+			ptr[0] = '\0';
+			value = ptr + 1;
+		} else if (ptr[0] == '\0' || ptr[0] == ',') {
+			/* Terminate the string containing the key/value pair */
+			ptr[0] = '\0';
+
+			if (key == value) {
+				pr_debug("Malformed key/value pair\n");
+				/* Never found a '=', end processing */
+				break;
+			}
+
+			if (0 == strcmp(key, "CMOPageSize"))
+				page_order = simple_strtol(value, NULL, 10);
+			else if (0 == strcmp(key, "PrPSP"))
+				CMO_PrPSP = simple_strtol(value, NULL, 10);
+			else if (0 == strcmp(key, "SecPSP"))
+				CMO_SecPSP = simple_strtol(value, NULL, 10);
+			value = key = ptr + 1;
+		}
+		ptr++;
+	}
+
+	/* Page size is returned as the power of 2 of the page size,
+	 * convert to the page size in bytes before returning
+	 */
+	CMO_PageSize = 1 << page_order;
+	pr_debug("CMO_PageSize = %lu\n", CMO_PageSize);
+
+	if (CMO_PrPSP != -1 || CMO_SecPSP != -1) {
+		pr_info("CMO enabled\n");
+		pr_debug("CMO enabled, PrPSP=%d, SecPSP=%d\n", CMO_PrPSP,
+		         CMO_SecPSP);
+		powerpc_firmware_features |= FW_FEATURE_CMO;
+	} else
+		pr_debug("CMO not enabled, PrPSP=%d, SecPSP=%d\n", CMO_PrPSP,
+		         CMO_SecPSP);
+	spin_unlock(&rtas_data_buf_lock);
+	pr_debug(" <- fw_cmo_feature_init()\n");
+}
+
 /*
  * Early initialization.  Relocation is on but do not reference unbolted pages
  */
@@ -329,6 +412,7 @@ static void __init pSeries_init_early(void)
 	else if (firmware_has_feature(FW_FEATURE_XDABR))
 		ppc_md.set_dabr = pseries_set_xdabr;
 
+	pSeries_cmo_feature_init();
 	iommu_init_early_pSeries();
 
 	pr_debug(" <- pSeries_init_early()\n");
diff --git a/arch/powerpc/sysdev/Makefile b/arch/powerpc/sysdev/Makefile
index 16a0ed28eb00..a90054b56d5c 100644
--- a/arch/powerpc/sysdev/Makefile
+++ b/arch/powerpc/sysdev/Makefile
@@ -25,7 +25,6 @@ obj-$(CONFIG_MV64X60)		+= $(mv64x60-y) mv64x60_pic.o mv64x60_dev.o \
 obj-$(CONFIG_RTC_DRV_CMOS)	+= rtc_cmos_setup.o
 obj-$(CONFIG_AXON_RAM)		+= axonram.o
 
-ifeq ($(CONFIG_PPC_MERGE),y)
 obj-$(CONFIG_PPC_INDIRECT_PCI)	+= indirect_pci.o
 obj-$(CONFIG_PPC_I8259)		+= i8259.o
 obj-$(CONFIG_IPIC)		+= ipic.o
@@ -36,7 +35,6 @@ obj-$(CONFIG_OF_RTC)		+= of_rtc.o
 ifeq ($(CONFIG_PCI),y)
 obj-$(CONFIG_4xx)		+= ppc4xx_pci.o
 endif
-endif
 
 # Temporary hack until we have migrated to asm-powerpc
 ifeq ($(ARCH),powerpc)
diff --git a/arch/powerpc/sysdev/bestcomm/gen_bd.c b/arch/powerpc/sysdev/bestcomm/gen_bd.c
index a3a134c35b0a..e0a53e3147b2 100644
--- a/arch/powerpc/sysdev/bestcomm/gen_bd.c
+++ b/arch/powerpc/sysdev/bestcomm/gen_bd.c
@@ -11,7 +11,6 @@
  *
  */
 
-#include <linux/version.h>
 #include <linux/module.h>
 #include <linux/kernel.h>
 #include <linux/string.h>
diff --git a/arch/powerpc/sysdev/cpm1.c b/arch/powerpc/sysdev/cpm1.c
index 661df42830b9..4a04823e8423 100644
--- a/arch/powerpc/sysdev/cpm1.c
+++ b/arch/powerpc/sysdev/cpm1.c
@@ -30,6 +30,7 @@
 #include <linux/interrupt.h>
 #include <linux/irq.h>
 #include <linux/module.h>
+#include <linux/spinlock.h>
 #include <asm/page.h>
 #include <asm/pgtable.h>
 #include <asm/8xx_immap.h>
@@ -42,6 +43,10 @@
 
 #include <asm/fs_pd.h>
 
+#ifdef CONFIG_8xx_GPIO
+#include <linux/of_gpio.h>
+#endif
+
 #define CPM_MAP_SIZE    (0x4000)
 
 cpm8xx_t __iomem *cpmp;  /* Pointer to comm processor space */
@@ -290,20 +295,24 @@ struct cpm_ioport16 {
 	__be16 res[3];
 };
 
-struct cpm_ioport32 {
-	__be32 dir, par, sor;
+struct cpm_ioport32b {
+	__be32 dir, par, odr, dat;
+};
+
+struct cpm_ioport32e {
+	__be32 dir, par, sor, odr, dat;
 };
 
 static void cpm1_set_pin32(int port, int pin, int flags)
 {
-	struct cpm_ioport32 __iomem *iop;
+	struct cpm_ioport32e __iomem *iop;
 	pin = 1 << (31 - pin);
 
 	if (port == CPM_PORTB)
-		iop = (struct cpm_ioport32 __iomem *)
+		iop = (struct cpm_ioport32e __iomem *)
 		      &mpc8xx_immr->im_cpm.cp_pbdir;
 	else
-		iop = (struct cpm_ioport32 __iomem *)
+		iop = (struct cpm_ioport32e __iomem *)
 		      &mpc8xx_immr->im_cpm.cp_pedir;
 
 	if (flags & CPM_PIN_OUTPUT)
@@ -498,3 +507,251 @@ int cpm1_clk_setup(enum cpm_clk_target target, int clock, int mode)
 
 	return 0;
 }
+
+/*
+ * GPIO LIB API implementation
+ */
+#ifdef CONFIG_8xx_GPIO
+
+struct cpm1_gpio16_chip {
+	struct of_mm_gpio_chip mm_gc;
+	spinlock_t lock;
+
+	/* shadowed data register to clear/set bits safely */
+	u16 cpdata;
+};
+
+static inline struct cpm1_gpio16_chip *
+to_cpm1_gpio16_chip(struct of_mm_gpio_chip *mm_gc)
+{
+	return container_of(mm_gc, struct cpm1_gpio16_chip, mm_gc);
+}
+
+static void cpm1_gpio16_save_regs(struct of_mm_gpio_chip *mm_gc)
+{
+	struct cpm1_gpio16_chip *cpm1_gc = to_cpm1_gpio16_chip(mm_gc);
+	struct cpm_ioport16 __iomem *iop = mm_gc->regs;
+
+	cpm1_gc->cpdata = in_be16(&iop->dat);
+}
+
+static int cpm1_gpio16_get(struct gpio_chip *gc, unsigned int gpio)
+{
+	struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);
+	struct cpm_ioport16 __iomem *iop = mm_gc->regs;
+	u16 pin_mask;
+
+	pin_mask = 1 << (15 - gpio);
+
+	return !!(in_be16(&iop->dat) & pin_mask);
+}
+
+static void cpm1_gpio16_set(struct gpio_chip *gc, unsigned int gpio, int value)
+{
+	struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);
+	struct cpm1_gpio16_chip *cpm1_gc = to_cpm1_gpio16_chip(mm_gc);
+	struct cpm_ioport16 __iomem *iop = mm_gc->regs;
+	unsigned long flags;
+	u16 pin_mask = 1 << (15 - gpio);
+
+	spin_lock_irqsave(&cpm1_gc->lock, flags);
+
+	if (value)
+		cpm1_gc->cpdata |= pin_mask;
+	else
+		cpm1_gc->cpdata &= ~pin_mask;
+
+	out_be16(&iop->dat, cpm1_gc->cpdata);
+
+	spin_unlock_irqrestore(&cpm1_gc->lock, flags);
+}
+
+static int cpm1_gpio16_dir_out(struct gpio_chip *gc, unsigned int gpio, int val)
+{
+	struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);
+	struct cpm_ioport16 __iomem *iop = mm_gc->regs;
+	u16 pin_mask;
+
+	pin_mask = 1 << (15 - gpio);
+
+	setbits16(&iop->dir, pin_mask);
+
+	cpm1_gpio16_set(gc, gpio, val);
+
+	return 0;
+}
+
+static int cpm1_gpio16_dir_in(struct gpio_chip *gc, unsigned int gpio)
+{
+	struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);
+	struct cpm_ioport16 __iomem *iop = mm_gc->regs;
+	u16 pin_mask;
+
+	pin_mask = 1 << (15 - gpio);
+
+	clrbits16(&iop->dir, pin_mask);
+
+	return 0;
+}
+
+int cpm1_gpiochip_add16(struct device_node *np)
+{
+	struct cpm1_gpio16_chip *cpm1_gc;
+	struct of_mm_gpio_chip *mm_gc;
+	struct of_gpio_chip *of_gc;
+	struct gpio_chip *gc;
+
+	cpm1_gc = kzalloc(sizeof(*cpm1_gc), GFP_KERNEL);
+	if (!cpm1_gc)
+		return -ENOMEM;
+
+	spin_lock_init(&cpm1_gc->lock);
+
+	mm_gc = &cpm1_gc->mm_gc;
+	of_gc = &mm_gc->of_gc;
+	gc = &of_gc->gc;
+
+	mm_gc->save_regs = cpm1_gpio16_save_regs;
+	of_gc->gpio_cells = 2;
+	gc->ngpio = 16;
+	gc->direction_input = cpm1_gpio16_dir_in;
+	gc->direction_output = cpm1_gpio16_dir_out;
+	gc->get = cpm1_gpio16_get;
+	gc->set = cpm1_gpio16_set;
+
+	return of_mm_gpiochip_add(np, mm_gc);
+}
+
+struct cpm1_gpio32_chip {
+	struct of_mm_gpio_chip mm_gc;
+	spinlock_t lock;
+
+	/* shadowed data register to clear/set bits safely */
+	u32 cpdata;
+};
+
+static inline struct cpm1_gpio32_chip *
+to_cpm1_gpio32_chip(struct of_mm_gpio_chip *mm_gc)
+{
+	return container_of(mm_gc, struct cpm1_gpio32_chip, mm_gc);
+}
+
+static void cpm1_gpio32_save_regs(struct of_mm_gpio_chip *mm_gc)
+{
+	struct cpm1_gpio32_chip *cpm1_gc = to_cpm1_gpio32_chip(mm_gc);
+	struct cpm_ioport32b __iomem *iop = mm_gc->regs;
+
+	cpm1_gc->cpdata = in_be32(&iop->dat);
+}
+
+static int cpm1_gpio32_get(struct gpio_chip *gc, unsigned int gpio)
+{
+	struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);
+	struct cpm_ioport32b __iomem *iop = mm_gc->regs;
+	u32 pin_mask;
+
+	pin_mask = 1 << (31 - gpio);
+
+	return !!(in_be32(&iop->dat) & pin_mask);
+}
+
+static void cpm1_gpio32_set(struct gpio_chip *gc, unsigned int gpio, int value)
+{
+	struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);
+	struct cpm1_gpio32_chip *cpm1_gc = to_cpm1_gpio32_chip(mm_gc);
+	struct cpm_ioport32b __iomem *iop = mm_gc->regs;
+	unsigned long flags;
+	u32 pin_mask = 1 << (31 - gpio);
+
+	spin_lock_irqsave(&cpm1_gc->lock, flags);
+
+	if (value)
+		cpm1_gc->cpdata |= pin_mask;
+	else
+		cpm1_gc->cpdata &= ~pin_mask;
+
+	out_be32(&iop->dat, cpm1_gc->cpdata);
+
+	spin_unlock_irqrestore(&cpm1_gc->lock, flags);
+}
+
+static int cpm1_gpio32_dir_out(struct gpio_chip *gc, unsigned int gpio, int val)
+{
+	struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);
+	struct cpm_ioport32b __iomem *iop = mm_gc->regs;
+	u32 pin_mask;
+
+	pin_mask = 1 << (31 - gpio);
+
+	setbits32(&iop->dir, pin_mask);
+
+	cpm1_gpio32_set(gc, gpio, val);
+
+	return 0;
+}
+
+static int cpm1_gpio32_dir_in(struct gpio_chip *gc, unsigned int gpio)
+{
+	struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);
+	struct cpm_ioport32b __iomem *iop = mm_gc->regs;
+	u32 pin_mask;
+
+	pin_mask = 1 << (31 - gpio);
+
+	clrbits32(&iop->dir, pin_mask);
+
+	return 0;
+}
+
+int cpm1_gpiochip_add32(struct device_node *np)
+{
+	struct cpm1_gpio32_chip *cpm1_gc;
+	struct of_mm_gpio_chip *mm_gc;
+	struct of_gpio_chip *of_gc;
+	struct gpio_chip *gc;
+
+	cpm1_gc = kzalloc(sizeof(*cpm1_gc), GFP_KERNEL);
+	if (!cpm1_gc)
+		return -ENOMEM;
+
+	spin_lock_init(&cpm1_gc->lock);
+
+	mm_gc = &cpm1_gc->mm_gc;
+	of_gc = &mm_gc->of_gc;
+	gc = &of_gc->gc;
+
+	mm_gc->save_regs = cpm1_gpio32_save_regs;
+	of_gc->gpio_cells = 2;
+	gc->ngpio = 32;
+	gc->direction_input = cpm1_gpio32_dir_in;
+	gc->direction_output = cpm1_gpio32_dir_out;
+	gc->get = cpm1_gpio32_get;
+	gc->set = cpm1_gpio32_set;
+
+	return of_mm_gpiochip_add(np, mm_gc);
+}
+
+static int cpm_init_par_io(void)
+{
+	struct device_node *np;
+
+	for_each_compatible_node(np, NULL, "fsl,cpm1-pario-bank-a")
+		cpm1_gpiochip_add16(np);
+
+	for_each_compatible_node(np, NULL, "fsl,cpm1-pario-bank-b")
+		cpm1_gpiochip_add32(np);
+
+	for_each_compatible_node(np, NULL, "fsl,cpm1-pario-bank-c")
+		cpm1_gpiochip_add16(np);
+
+	for_each_compatible_node(np, NULL, "fsl,cpm1-pario-bank-d")
+		cpm1_gpiochip_add16(np);
+
+	/* Port E uses CPM2 layout */
+	for_each_compatible_node(np, NULL, "fsl,cpm1-pario-bank-e")
+		cpm2_gpiochip_add32(np);
+	return 0;
+}
+arch_initcall(cpm_init_par_io);
+
+#endif /* CONFIG_8xx_GPIO */
diff --git a/arch/powerpc/sysdev/cpm2.c b/arch/powerpc/sysdev/cpm2.c
index 5a6c5dfc53ef..f1c3395633b9 100644
--- a/arch/powerpc/sysdev/cpm2.c
+++ b/arch/powerpc/sysdev/cpm2.c
@@ -115,16 +115,10 @@ EXPORT_SYMBOL(cpm_command);
  * Baud rate clocks are zero-based in the driver code (as that maps
  * to port numbers).  Documentation uses 1-based numbering.
  */
-#define BRG_INT_CLK	(get_brgfreq())
-#define BRG_UART_CLK	(BRG_INT_CLK/16)
-
-/* This function is used by UARTS, or anything else that uses a 16x
- * oversampled clock.
- */
-void
-cpm_setbrg(uint brg, uint rate)
+void __cpm2_setbrg(uint brg, uint rate, uint clk, int div16, int src)
 {
 	u32 __iomem *bp;
+	u32 val;
 
 	/* This is good enough to get SMCs running.....
 	*/
@@ -135,34 +129,14 @@ cpm_setbrg(uint brg, uint rate)
 		brg -= 4;
 	}
 	bp += brg;
-	out_be32(bp, (((BRG_UART_CLK / rate) - 1) << 1) | CPM_BRG_EN);
-
-	cpm2_unmap(bp);
-}
-
-/* This function is used to set high speed synchronous baud rate
- * clocks.
- */
-void
-cpm2_fastbrg(uint brg, uint rate, int div16)
-{
-	u32 __iomem *bp;
-	u32 val;
-
-	if (brg < 4) {
-		bp = cpm2_map_size(im_brgc1, 16);
-	} else {
-		bp = cpm2_map_size(im_brgc5, 16);
-		brg -= 4;
-	}
-	bp += brg;
-	val = ((BRG_INT_CLK / rate) << 1) | CPM_BRG_EN;
+	val = (((clk / rate) - 1) << 1) | CPM_BRG_EN | src;
 	if (div16)
 		val |= CPM_BRG_DIV16;
 
 	out_be32(bp, val);
 	cpm2_unmap(bp);
 }
+EXPORT_SYMBOL(__cpm2_setbrg);
 
 int cpm2_clk_setup(enum cpm_clk_target target, int clock, int mode)
 {
@@ -377,3 +351,14 @@ void cpm2_set_pin(int port, int pin, int flags)
 	else
 		clrbits32(&iop[port].odr, pin);
 }
+
+static int cpm_init_par_io(void)
+{
+	struct device_node *np;
+
+	for_each_compatible_node(np, NULL, "fsl,cpm2-pario-bank")
+		cpm2_gpiochip_add32(np);
+	return 0;
+}
+arch_initcall(cpm_init_par_io);
+
diff --git a/arch/powerpc/sysdev/cpm_common.c b/arch/powerpc/sysdev/cpm_common.c
index e4b7296acb2c..00d3d17c84a3 100644
--- a/arch/powerpc/sysdev/cpm_common.c
+++ b/arch/powerpc/sysdev/cpm_common.c
@@ -19,6 +19,8 @@
 
 #include <linux/init.h>
 #include <linux/of_device.h>
+#include <linux/spinlock.h>
+#include <linux/of.h>
 
 #include <asm/udbg.h>
 #include <asm/io.h>
@@ -28,6 +30,10 @@
 
 #include <mm/mmu_decl.h>
 
+#if defined(CONFIG_CPM2) || defined(CONFIG_8xx_GPIO)
+#include <linux/of_gpio.h>
+#endif
+
 #ifdef CONFIG_PPC_EARLY_DEBUG_CPM
 static u32 __iomem *cpm_udbg_txdesc =
 	(u32 __iomem __force *)CONFIG_PPC_EARLY_DEBUG_CPM_ADDR;
@@ -207,3 +213,135 @@ dma_addr_t cpm_muram_dma(void __iomem *addr)
 	return muram_pbase + ((u8 __iomem *)addr - muram_vbase);
 }
 EXPORT_SYMBOL(cpm_muram_dma);
+
+#if defined(CONFIG_CPM2) || defined(CONFIG_8xx_GPIO)
+
+struct cpm2_ioports {
+	u32 dir, par, sor, odr, dat;
+	u32 res[3];
+};
+
+struct cpm2_gpio32_chip {
+	struct of_mm_gpio_chip mm_gc;
+	spinlock_t lock;
+
+	/* shadowed data register to clear/set bits safely */
+	u32 cpdata;
+};
+
+static inline struct cpm2_gpio32_chip *
+to_cpm2_gpio32_chip(struct of_mm_gpio_chip *mm_gc)
+{
+	return container_of(mm_gc, struct cpm2_gpio32_chip, mm_gc);
+}
+
+static void cpm2_gpio32_save_regs(struct of_mm_gpio_chip *mm_gc)
+{
+	struct cpm2_gpio32_chip *cpm2_gc = to_cpm2_gpio32_chip(mm_gc);
+	struct cpm2_ioports __iomem *iop = mm_gc->regs;
+
+	cpm2_gc->cpdata = in_be32(&iop->dat);
+}
+
+static int cpm2_gpio32_get(struct gpio_chip *gc, unsigned int gpio)
+{
+	struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);
+	struct cpm2_ioports __iomem *iop = mm_gc->regs;
+	u32 pin_mask;
+
+	pin_mask = 1 << (31 - gpio);
+
+	return !!(in_be32(&iop->dat) & pin_mask);
+}
+
+static void __cpm2_gpio32_set(struct of_mm_gpio_chip *mm_gc, u32 pin_mask,
+	int value)
+{
+	struct cpm2_gpio32_chip *cpm2_gc = to_cpm2_gpio32_chip(mm_gc);
+	struct cpm2_ioports __iomem *iop = mm_gc->regs;
+
+	if (value)
+		cpm2_gc->cpdata |= pin_mask;
+	else
+		cpm2_gc->cpdata &= ~pin_mask;
+
+	out_be32(&iop->dat, cpm2_gc->cpdata);
+}
+
+static void cpm2_gpio32_set(struct gpio_chip *gc, unsigned int gpio, int value)
+{
+	struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);
+	struct cpm2_gpio32_chip *cpm2_gc = to_cpm2_gpio32_chip(mm_gc);
+	unsigned long flags;
+	u32 pin_mask = 1 << (31 - gpio);
+
+	spin_lock_irqsave(&cpm2_gc->lock, flags);
+
+	__cpm2_gpio32_set(mm_gc, pin_mask, value);
+
+	spin_unlock_irqrestore(&cpm2_gc->lock, flags);
+}
+
+static int cpm2_gpio32_dir_out(struct gpio_chip *gc, unsigned int gpio, int val)
+{
+	struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);
+	struct cpm2_gpio32_chip *cpm2_gc = to_cpm2_gpio32_chip(mm_gc);
+	struct cpm2_ioports __iomem *iop = mm_gc->regs;
+	unsigned long flags;
+	u32 pin_mask = 1 << (31 - gpio);
+
+	spin_lock_irqsave(&cpm2_gc->lock, flags);
+
+	setbits32(&iop->dir, pin_mask);
+	__cpm2_gpio32_set(mm_gc, pin_mask, val);
+
+	spin_unlock_irqrestore(&cpm2_gc->lock, flags);
+
+	return 0;
+}
+
+static int cpm2_gpio32_dir_in(struct gpio_chip *gc, unsigned int gpio)
+{
+	struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);
+	struct cpm2_gpio32_chip *cpm2_gc = to_cpm2_gpio32_chip(mm_gc);
+	struct cpm2_ioports __iomem *iop = mm_gc->regs;
+	unsigned long flags;
+	u32 pin_mask = 1 << (31 - gpio);
+
+	spin_lock_irqsave(&cpm2_gc->lock, flags);
+
+	clrbits32(&iop->dir, pin_mask);
+
+	spin_unlock_irqrestore(&cpm2_gc->lock, flags);
+
+	return 0;
+}
+
+int cpm2_gpiochip_add32(struct device_node *np)
+{
+	struct cpm2_gpio32_chip *cpm2_gc;
+	struct of_mm_gpio_chip *mm_gc;
+	struct of_gpio_chip *of_gc;
+	struct gpio_chip *gc;
+
+	cpm2_gc = kzalloc(sizeof(*cpm2_gc), GFP_KERNEL);
+	if (!cpm2_gc)
+		return -ENOMEM;
+
+	spin_lock_init(&cpm2_gc->lock);
+
+	mm_gc = &cpm2_gc->mm_gc;
+	of_gc = &mm_gc->of_gc;
+	gc = &of_gc->gc;
+
+	mm_gc->save_regs = cpm2_gpio32_save_regs;
+	of_gc->gpio_cells = 2;
+	gc->ngpio = 32;
+	gc->direction_input = cpm2_gpio32_dir_in;
+	gc->direction_output = cpm2_gpio32_dir_out;
+	gc->get = cpm2_gpio32_get;
+	gc->set = cpm2_gpio32_set;
+
+	return of_mm_gpiochip_add(np, mm_gc);
+}
+#endif /* CONFIG_CPM2 || CONFIG_8xx_GPIO */
diff --git a/arch/powerpc/sysdev/dart_iommu.c b/arch/powerpc/sysdev/dart_iommu.c
index de8c8b542cfa..89639ecbf381 100644
--- a/arch/powerpc/sysdev/dart_iommu.c
+++ b/arch/powerpc/sysdev/dart_iommu.c
@@ -147,7 +147,7 @@ static void dart_flush(struct iommu_table *tbl)
 	}
 }
 
-static void dart_build(struct iommu_table *tbl, long index,
+static int dart_build(struct iommu_table *tbl, long index,
 		       long npages, unsigned long uaddr,
 		       enum dma_data_direction direction,
 		       struct dma_attrs *attrs)
@@ -184,6 +184,7 @@ static void dart_build(struct iommu_table *tbl, long index,
 	} else {
 		dart_dirty = 1;
 	}
+	return 0;
 }
 
 
diff --git a/arch/powerpc/sysdev/qe_lib/Kconfig b/arch/powerpc/sysdev/qe_lib/Kconfig
index 4bb18f57901e..1ce546462be5 100644
--- a/arch/powerpc/sysdev/qe_lib/Kconfig
+++ b/arch/powerpc/sysdev/qe_lib/Kconfig
@@ -29,7 +29,7 @@ config QE_GPIO
 	bool "QE GPIO support"
 	depends on QUICC_ENGINE
 	select GENERIC_GPIO
-	select HAVE_GPIO_LIB
+	select ARCH_REQUIRE_GPIOLIB
 	help
 	  Say Y here if you're going to use hardware that connects to the
 	  QE GPIOs.
diff --git a/arch/powerpc/sysdev/qe_lib/ucc_fast.c b/arch/powerpc/sysdev/qe_lib/ucc_fast.c
index 1aecb075a72e..25fbbfaa837d 100644
--- a/arch/powerpc/sysdev/qe_lib/ucc_fast.c
+++ b/arch/powerpc/sysdev/qe_lib/ucc_fast.c
@@ -208,6 +208,7 @@ int ucc_fast_init(struct ucc_fast_info * uf_info, struct ucc_fast_private ** ucc
 	uccf->uf_regs = ioremap(uf_info->regs, sizeof(struct ucc_fast));
 	if (uccf->uf_regs == NULL) {
 		printk(KERN_ERR "%s: Cannot map UCC registers\n", __func__);
+		kfree(uccf);
 		return -ENOMEM;
 	}
 
@@ -355,6 +356,9 @@ void ucc_fast_free(struct ucc_fast_private * uccf)
 	if (uccf->ucc_fast_rx_virtual_fifo_base_offset)
 		qe_muram_free(uccf->ucc_fast_rx_virtual_fifo_base_offset);
 
+	if (uccf->uf_regs)
+		iounmap(uccf->uf_regs);
+
 	kfree(uccf);
 }
 EXPORT_SYMBOL(ucc_fast_free);
diff --git a/arch/powerpc/sysdev/qe_lib/ucc_slow.c b/arch/powerpc/sysdev/qe_lib/ucc_slow.c
index a578bc77b9d5..e1d6a1340157 100644
--- a/arch/powerpc/sysdev/qe_lib/ucc_slow.c
+++ b/arch/powerpc/sysdev/qe_lib/ucc_slow.c
@@ -171,6 +171,7 @@ int ucc_slow_init(struct ucc_slow_info * us_info, struct ucc_slow_private ** ucc
 	uccs->us_regs = ioremap(us_info->regs, sizeof(struct ucc_slow));
 	if (uccs->us_regs == NULL) {
 		printk(KERN_ERR "%s: Cannot map UCC registers\n", __func__);
+		kfree(uccs);
 		return -ENOMEM;
 	}
 
@@ -367,10 +368,11 @@ void ucc_slow_free(struct ucc_slow_private * uccs)
 	if (uccs->tx_base_offset)
 		qe_muram_free(uccs->tx_base_offset);
 
-	if (uccs->us_pram) {
+	if (uccs->us_pram)
 		qe_muram_free(uccs->us_pram_offset);
-		uccs->us_pram = NULL;
-	}
+
+	if (uccs->us_regs)
+		iounmap(uccs->us_regs);
 
 	kfree(uccs);
 }
diff --git a/arch/powerpc/sysdev/rtc_cmos_setup.c b/arch/powerpc/sysdev/rtc_cmos_setup.c
index c09ddc0dbeb3..c1879ebfd4f4 100644
--- a/arch/powerpc/sysdev/rtc_cmos_setup.c
+++ b/arch/powerpc/sysdev/rtc_cmos_setup.c
@@ -21,6 +21,7 @@ static int  __init add_rtc(void)
 	struct device_node *np;
 	struct platform_device *pd;
 	struct resource res[2];
+	unsigned int num_res = 1;
 	int ret;
 
 	memset(&res, 0, sizeof(res));
@@ -41,14 +42,24 @@ static int  __init add_rtc(void)
 	if (res[0].start != RTC_PORT(0))
 		return -EINVAL;
 
-	/* Use a fixed interrupt value of 8 since on PPC if we are using this
-	 * its off an i8259 which we ensure has interrupt numbers 0..15. */
-	res[1].start = 8;
-	res[1].end = 8;
-	res[1].flags = IORESOURCE_IRQ;
+	np = of_find_compatible_node(NULL, NULL, "chrp,iic");
+	if (!np)
+		np = of_find_compatible_node(NULL, NULL, "pnpPNP,000");
+	if (np) {
+		of_node_put(np);
+		/*
+		 * Use a fixed interrupt value of 8 since on PPC if we are
+		 * using this its off an i8259 which we ensure has interrupt
+		 * numbers 0..15.
+		 */
+		res[1].start = 8;
+		res[1].end = 8;
+		res[1].flags = IORESOURCE_IRQ;
+		num_res++;
+	}
 
 	pd = platform_device_register_simple("rtc_cmos", -1,
-					     &res[0], 2);
+					     &res[0], num_res);
 
 	if (IS_ERR(pd))
 		return PTR_ERR(pd);
diff --git a/arch/s390/Kconfig b/arch/s390/Kconfig
index eb530b4128ba..8d41908e2513 100644
--- a/arch/s390/Kconfig
+++ b/arch/s390/Kconfig
@@ -317,6 +317,9 @@ config ARCH_ENABLE_MEMORY_HOTPLUG
 	def_bool y
 	depends on SPARSEMEM
 
+config ARCH_ENABLE_MEMORY_HOTREMOVE
+	def_bool y
+
 source "mm/Kconfig"
 
 comment "I/O subsystem configuration"
@@ -565,6 +568,7 @@ bool "s390 guest support (EXPERIMENTAL)"
 	depends on 64BIT && EXPERIMENTAL
 	select VIRTIO
 	select VIRTIO_RING
+	select VIRTIO_CONSOLE
 	help
 	  Select this option if you want to run the kernel under s390 linux
 endmenu
diff --git a/arch/s390/defconfig b/arch/s390/defconfig
index c5cdb975d590..9b0bc2c9fba0 100644
--- a/arch/s390/defconfig
+++ b/arch/s390/defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc4
-# Fri May 30 09:49:33 2008
+# Linux kernel version: 2.6.27-rc4
+# Thu Aug 21 19:43:29 2008
 #
 CONFIG_SCHED_MC=y
 CONFIG_MMU=y
@@ -68,7 +68,6 @@ CONFIG_INITRAMFS_SOURCE=""
 CONFIG_SYSCTL=y
 # CONFIG_EMBEDDED is not set
 CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
@@ -93,11 +92,17 @@ CONFIG_SLAB=y
 # CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 CONFIG_KPROBES=y
+# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
 CONFIG_KRETPROBES=y
+# CONFIG_HAVE_IOREMAP_PROT is not set
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
+# CONFIG_HAVE_ARCH_TRACEHOOK is not set
 # CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+# CONFIG_HAVE_CLK is not set
 CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
@@ -113,6 +118,7 @@ CONFIG_STOP_MACHINE=y
 CONFIG_BLOCK=y
 # CONFIG_BLK_DEV_IO_TRACE is not set
 CONFIG_BLK_DEV_BSG=y
+# CONFIG_BLK_DEV_INTEGRITY is not set
 CONFIG_BLOCK_COMPAT=y
 
 #
@@ -175,6 +181,8 @@ CONFIG_PREEMPT=y
 CONFIG_ARCH_SPARSEMEM_ENABLE=y
 CONFIG_ARCH_SPARSEMEM_DEFAULT=y
 CONFIG_ARCH_SELECT_MEMORY_MODEL=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
 CONFIG_SELECT_MEMORY_MODEL=y
 # CONFIG_FLATMEM_MANUAL is not set
 # CONFIG_DISCONTIGMEM_MANUAL is not set
@@ -185,8 +193,12 @@ CONFIG_HAVE_MEMORY_PRESENT=y
 CONFIG_SPARSEMEM_EXTREME=y
 CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
 CONFIG_SPARSEMEM_VMEMMAP=y
+CONFIG_MEMORY_HOTPLUG=y
+CONFIG_MEMORY_HOTPLUG_SPARSE=y
+CONFIG_MEMORY_HOTREMOVE=y
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_MIGRATION=y
 CONFIG_RESOURCES_64BIT=y
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
@@ -198,6 +210,7 @@ CONFIG_VIRT_TO_BUS=y
 CONFIG_MACHCHK_WARNING=y
 CONFIG_QDIO=y
 # CONFIG_QDIO_DEBUG is not set
+CONFIG_CHSC_SCH=m
 
 #
 # Misc
@@ -206,6 +219,7 @@ CONFIG_IPL=y
 # CONFIG_IPL_TAPE is not set
 CONFIG_IPL_VM=y
 CONFIG_BINFMT_ELF=y
+CONFIG_COMPAT_BINFMT_ELF=y
 CONFIG_BINFMT_MISC=m
 CONFIG_FORCE_MAX_ZONEORDER=9
 # CONFIG_PROCESS_DEBUG is not set
@@ -226,10 +240,6 @@ CONFIG_S390_HYPFS_FS=y
 CONFIG_KEXEC=y
 # CONFIG_ZFCPDUMP is not set
 CONFIG_S390_GUEST=y
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -364,7 +374,6 @@ CONFIG_NET_SCH_CBQ=m
 # CONFIG_NET_SCH_HTB is not set
 # CONFIG_NET_SCH_HFSC is not set
 CONFIG_NET_SCH_PRIO=m
-CONFIG_NET_SCH_RR=m
 CONFIG_NET_SCH_RED=m
 CONFIG_NET_SCH_SFQ=m
 CONFIG_NET_SCH_TEQL=m
@@ -430,7 +439,9 @@ CONFIG_CCW=y
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
+CONFIG_FW_LOADER=y
+# CONFIG_FIRMWARE_IN_KERNEL is not set
+CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_DEBUG_DRIVER is not set
 # CONFIG_DEBUG_DEVRES is not set
 CONFIG_SYS_HYPERVISOR=y
@@ -507,6 +518,11 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_ISCSI_TCP is not set
 # CONFIG_SCSI_DEBUG is not set
 CONFIG_ZFCP=y
+CONFIG_SCSI_DH=m
+CONFIG_SCSI_DH_RDAC=m
+CONFIG_SCSI_DH_HP_SW=m
+CONFIG_SCSI_DH_EMC=m
+CONFIG_SCSI_DH_ALUA=m
 CONFIG_MD=y
 CONFIG_BLK_DEV_MD=y
 CONFIG_MD_LINEAR=m
@@ -522,14 +538,10 @@ CONFIG_DM_CRYPT=y
 CONFIG_DM_SNAPSHOT=y
 CONFIG_DM_MIRROR=y
 CONFIG_DM_ZERO=y
-CONFIG_DM_MULTIPATH=y
-# CONFIG_DM_MULTIPATH_EMC is not set
-# CONFIG_DM_MULTIPATH_RDAC is not set
-# CONFIG_DM_MULTIPATH_HP is not set
+CONFIG_DM_MULTIPATH=m
 # CONFIG_DM_DELAY is not set
 # CONFIG_DM_UEVENT is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 # CONFIG_IFB is not set
 CONFIG_DUMMY=m
 CONFIG_BONDING=m
@@ -544,7 +556,6 @@ CONFIG_NET_ETHERNET=y
 # CONFIG_IBM_NEW_EMAC_TAH is not set
 # CONFIG_IBM_NEW_EMAC_EMAC4 is not set
 CONFIG_NETDEV_1000=y
-# CONFIG_E1000E_ENABLED is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_TR is not set
 # CONFIG_WAN is not set
@@ -576,7 +587,10 @@ CONFIG_DEVKMEM=y
 CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
+CONFIG_HVC_DRIVER=y
+CONFIG_VIRTIO_CONSOLE=y
 CONFIG_HW_RANDOM=m
+CONFIG_HW_RANDOM_VIRTIO=m
 # CONFIG_R3964 is not set
 CONFIG_RAW_DRIVER=m
 CONFIG_MAX_RAW_DEVS=256
@@ -616,6 +630,7 @@ CONFIG_MONWRITER=m
 CONFIG_S390_VMUR=m
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
 
 #
@@ -693,6 +708,7 @@ CONFIG_CONFIGFS_FS=m
 # CONFIG_CRAMFS is not set
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
 # CONFIG_ROMFS_FS is not set
@@ -712,7 +728,6 @@ CONFIG_LOCKD_V4=y
 CONFIG_EXPORTFS=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -780,6 +795,7 @@ CONFIG_DEBUG_BUGVERBOSE=y
 # CONFIG_DEBUG_INFO is not set
 # CONFIG_DEBUG_VM is not set
 # CONFIG_DEBUG_WRITECOUNT is not set
+CONFIG_DEBUG_MEMORY_INIT=y
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_FRAME_POINTER is not set
@@ -789,6 +805,7 @@ CONFIG_DEBUG_BUGVERBOSE=y
 # CONFIG_LKDTM is not set
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_LATENCYTOP is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_SAMPLES=y
 # CONFIG_SAMPLE_KOBJECT is not set
 # CONFIG_SAMPLE_KPROBES is not set
@@ -847,6 +864,10 @@ CONFIG_CRYPTO_HMAC=m
 # CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=m
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
+CONFIG_CRYPTO_RMD128=m
+CONFIG_CRYPTO_RMD160=m
+CONFIG_CRYPTO_RMD256=m
+CONFIG_CRYPTO_RMD320=m
 CONFIG_CRYPTO_SHA1=m
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
@@ -895,6 +916,7 @@ CONFIG_BITREVERSE=m
 # CONFIG_GENERIC_FIND_NEXT_BIT is not set
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
+CONFIG_CRC_T10DIF=y
 # CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=m
 CONFIG_CRC7=m
diff --git a/arch/s390/include/asm/Kbuild b/arch/s390/include/asm/Kbuild
new file mode 100644
index 000000000000..63a23415fba6
--- /dev/null
+++ b/arch/s390/include/asm/Kbuild
@@ -0,0 +1,15 @@
+include include/asm-generic/Kbuild.asm
+
+header-y += dasd.h
+header-y += monwriter.h
+header-y += qeth.h
+header-y += tape390.h
+header-y += ucontext.h
+header-y += vtoc.h
+header-y += zcrypt.h
+header-y += chsc.h
+
+unifdef-y += cmb.h
+unifdef-y += debug.h
+unifdef-y += chpid.h
+unifdef-y += schid.h
diff --git a/include/asm-s390/airq.h b/arch/s390/include/asm/airq.h
index 1ac80d6b0588..1ac80d6b0588 100644
--- a/include/asm-s390/airq.h
+++ b/arch/s390/include/asm/airq.h
diff --git a/include/asm-s390/appldata.h b/arch/s390/include/asm/appldata.h
index 79283dac8281..79283dac8281 100644
--- a/include/asm-s390/appldata.h
+++ b/arch/s390/include/asm/appldata.h
diff --git a/include/asm-s390/atomic.h b/arch/s390/include/asm/atomic.h
index 2d184655bc5d..2d184655bc5d 100644
--- a/include/asm-s390/atomic.h
+++ b/arch/s390/include/asm/atomic.h
diff --git a/include/asm-s390/auxvec.h b/arch/s390/include/asm/auxvec.h
index 0d340720fd99..0d340720fd99 100644
--- a/include/asm-s390/auxvec.h
+++ b/arch/s390/include/asm/auxvec.h
diff --git a/arch/s390/include/asm/bitops.h b/arch/s390/include/asm/bitops.h
new file mode 100644
index 000000000000..8e9243ae0c19
--- /dev/null
+++ b/arch/s390/include/asm/bitops.h
@@ -0,0 +1,884 @@
+#ifndef _S390_BITOPS_H
+#define _S390_BITOPS_H
+
+/*
+ *  include/asm-s390/bitops.h
+ *
+ *  S390 version
+ *    Copyright (C) 1999 IBM Deutschland Entwicklung GmbH, IBM Corporation
+ *    Author(s): Martin Schwidefsky (schwidefsky@de.ibm.com)
+ *
+ *  Derived from "include/asm-i386/bitops.h"
+ *    Copyright (C) 1992, Linus Torvalds
+ *
+ */
+
+#ifdef __KERNEL__
+
+#ifndef _LINUX_BITOPS_H
+#error only <linux/bitops.h> can be included directly
+#endif
+
+#include <linux/compiler.h>
+
+/*
+ * 32 bit bitops format:
+ * bit 0 is the LSB of *addr; bit 31 is the MSB of *addr;
+ * bit 32 is the LSB of *(addr+4). That combined with the
+ * big endian byte order on S390 give the following bit
+ * order in memory:
+ *    1f 1e 1d 1c 1b 1a 19 18 17 16 15 14 13 12 11 10 \
+ *    0f 0e 0d 0c 0b 0a 09 08 07 06 05 04 03 02 01 00
+ * after that follows the next long with bit numbers
+ *    3f 3e 3d 3c 3b 3a 39 38 37 36 35 34 33 32 31 30
+ *    2f 2e 2d 2c 2b 2a 29 28 27 26 25 24 23 22 21 20
+ * The reason for this bit ordering is the fact that
+ * in the architecture independent code bits operations
+ * of the form "flags |= (1 << bitnr)" are used INTERMIXED
+ * with operation of the form "set_bit(bitnr, flags)".
+ *
+ * 64 bit bitops format:
+ * bit 0 is the LSB of *addr; bit 63 is the MSB of *addr;
+ * bit 64 is the LSB of *(addr+8). That combined with the
+ * big endian byte order on S390 give the following bit
+ * order in memory:
+ *    3f 3e 3d 3c 3b 3a 39 38 37 36 35 34 33 32 31 30
+ *    2f 2e 2d 2c 2b 2a 29 28 27 26 25 24 23 22 21 20
+ *    1f 1e 1d 1c 1b 1a 19 18 17 16 15 14 13 12 11 10
+ *    0f 0e 0d 0c 0b 0a 09 08 07 06 05 04 03 02 01 00
+ * after that follows the next long with bit numbers
+ *    7f 7e 7d 7c 7b 7a 79 78 77 76 75 74 73 72 71 70
+ *    6f 6e 6d 6c 6b 6a 69 68 67 66 65 64 63 62 61 60
+ *    5f 5e 5d 5c 5b 5a 59 58 57 56 55 54 53 52 51 50
+ *    4f 4e 4d 4c 4b 4a 49 48 47 46 45 44 43 42 41 40
+ * The reason for this bit ordering is the fact that
+ * in the architecture independent code bits operations
+ * of the form "flags |= (1 << bitnr)" are used INTERMIXED
+ * with operation of the form "set_bit(bitnr, flags)".
+ */
+
+/* bitmap tables from arch/S390/kernel/bitmap.S */
+extern const char _oi_bitmap[];
+extern const char _ni_bitmap[];
+extern const char _zb_findmap[];
+extern const char _sb_findmap[];
+
+#ifndef __s390x__
+
+#define __BITOPS_ALIGN		3
+#define __BITOPS_WORDSIZE	32
+#define __BITOPS_OR		"or"
+#define __BITOPS_AND		"nr"
+#define __BITOPS_XOR		"xr"
+
+#if __GNUC__ > 3 || (__GNUC__ == 3 && __GNUC_MINOR__ > 2)
+
+#define __BITOPS_LOOP(__old, __new, __addr, __val, __op_string)	\
+	asm volatile(						\
+		"	l	%0,%2\n"			\
+		"0:	lr	%1,%0\n"			\
+		__op_string "	%1,%3\n"			\
+		"	cs	%0,%1,%2\n"			\
+		"	jl	0b"				\
+		: "=&d" (__old), "=&d" (__new),			\
+		  "=Q" (*(unsigned long *) __addr)		\
+		: "d" (__val), "Q" (*(unsigned long *) __addr)	\
+		: "cc");
+
+#else /* __GNUC__ */
+
+#define __BITOPS_LOOP(__old, __new, __addr, __val, __op_string)	\
+	asm volatile(						\
+		"	l	%0,0(%4)\n"			\
+		"0:	lr	%1,%0\n"			\
+		__op_string "	%1,%3\n"			\
+		"	cs	%0,%1,0(%4)\n"			\
+		"	jl	0b"				\
+		: "=&d" (__old), "=&d" (__new),			\
+		  "=m" (*(unsigned long *) __addr)		\
+		: "d" (__val), "a" (__addr),			\
+		  "m" (*(unsigned long *) __addr) : "cc");
+
+#endif /* __GNUC__ */
+
+#else /* __s390x__ */
+
+#define __BITOPS_ALIGN		7
+#define __BITOPS_WORDSIZE	64
+#define __BITOPS_OR		"ogr"
+#define __BITOPS_AND		"ngr"
+#define __BITOPS_XOR		"xgr"
+
+#if __GNUC__ > 3 || (__GNUC__ == 3 && __GNUC_MINOR__ > 2)
+
+#define __BITOPS_LOOP(__old, __new, __addr, __val, __op_string)	\
+	asm volatile(						\
+		"	lg	%0,%2\n"			\
+		"0:	lgr	%1,%0\n"			\
+		__op_string "	%1,%3\n"			\
+		"	csg	%0,%1,%2\n"			\
+		"	jl	0b"				\
+		: "=&d" (__old), "=&d" (__new),			\
+		  "=Q" (*(unsigned long *) __addr)		\
+		: "d" (__val), "Q" (*(unsigned long *) __addr)	\
+		: "cc");
+
+#else /* __GNUC__ */
+
+#define __BITOPS_LOOP(__old, __new, __addr, __val, __op_string)	\
+	asm volatile(						\
+		"	lg	%0,0(%4)\n"			\
+		"0:	lgr	%1,%0\n"			\
+		__op_string "	%1,%3\n"			\
+		"	csg	%0,%1,0(%4)\n"			\
+		"	jl	0b"				\
+		: "=&d" (__old), "=&d" (__new),			\
+		  "=m" (*(unsigned long *) __addr)		\
+		: "d" (__val), "a" (__addr),			\
+		  "m" (*(unsigned long *) __addr) : "cc");
+
+
+#endif /* __GNUC__ */
+
+#endif /* __s390x__ */
+
+#define __BITOPS_WORDS(bits) (((bits)+__BITOPS_WORDSIZE-1)/__BITOPS_WORDSIZE)
+#define __BITOPS_BARRIER() asm volatile("" : : : "memory")
+
+#ifdef CONFIG_SMP
+/*
+ * SMP safe set_bit routine based on compare and swap (CS)
+ */
+static inline void set_bit_cs(unsigned long nr, volatile unsigned long *ptr)
+{
+        unsigned long addr, old, new, mask;
+
+	addr = (unsigned long) ptr;
+	/* calculate address for CS */
+	addr += (nr ^ (nr & (__BITOPS_WORDSIZE - 1))) >> 3;
+	/* make OR mask */
+	mask = 1UL << (nr & (__BITOPS_WORDSIZE - 1));
+	/* Do the atomic update. */
+	__BITOPS_LOOP(old, new, addr, mask, __BITOPS_OR);
+}
+
+/*
+ * SMP safe clear_bit routine based on compare and swap (CS)
+ */
+static inline void clear_bit_cs(unsigned long nr, volatile unsigned long *ptr)
+{
+        unsigned long addr, old, new, mask;
+
+	addr = (unsigned long) ptr;
+	/* calculate address for CS */
+	addr += (nr ^ (nr & (__BITOPS_WORDSIZE - 1))) >> 3;
+	/* make AND mask */
+	mask = ~(1UL << (nr & (__BITOPS_WORDSIZE - 1)));
+	/* Do the atomic update. */
+	__BITOPS_LOOP(old, new, addr, mask, __BITOPS_AND);
+}
+
+/*
+ * SMP safe change_bit routine based on compare and swap (CS)
+ */
+static inline void change_bit_cs(unsigned long nr, volatile unsigned long *ptr)
+{
+        unsigned long addr, old, new, mask;
+
+	addr = (unsigned long) ptr;
+	/* calculate address for CS */
+	addr += (nr ^ (nr & (__BITOPS_WORDSIZE - 1))) >> 3;
+	/* make XOR mask */
+	mask = 1UL << (nr & (__BITOPS_WORDSIZE - 1));
+	/* Do the atomic update. */
+	__BITOPS_LOOP(old, new, addr, mask, __BITOPS_XOR);
+}
+
+/*
+ * SMP safe test_and_set_bit routine based on compare and swap (CS)
+ */
+static inline int
+test_and_set_bit_cs(unsigned long nr, volatile unsigned long *ptr)
+{
+        unsigned long addr, old, new, mask;
+
+	addr = (unsigned long) ptr;
+	/* calculate address for CS */
+	addr += (nr ^ (nr & (__BITOPS_WORDSIZE - 1))) >> 3;
+	/* make OR/test mask */
+	mask = 1UL << (nr & (__BITOPS_WORDSIZE - 1));
+	/* Do the atomic update. */
+	__BITOPS_LOOP(old, new, addr, mask, __BITOPS_OR);
+	__BITOPS_BARRIER();
+	return (old & mask) != 0;
+}
+
+/*
+ * SMP safe test_and_clear_bit routine based on compare and swap (CS)
+ */
+static inline int
+test_and_clear_bit_cs(unsigned long nr, volatile unsigned long *ptr)
+{
+        unsigned long addr, old, new, mask;
+
+	addr = (unsigned long) ptr;
+	/* calculate address for CS */
+	addr += (nr ^ (nr & (__BITOPS_WORDSIZE - 1))) >> 3;
+	/* make AND/test mask */
+	mask = ~(1UL << (nr & (__BITOPS_WORDSIZE - 1)));
+	/* Do the atomic update. */
+	__BITOPS_LOOP(old, new, addr, mask, __BITOPS_AND);
+	__BITOPS_BARRIER();
+	return (old ^ new) != 0;
+}
+
+/*
+ * SMP safe test_and_change_bit routine based on compare and swap (CS) 
+ */
+static inline int
+test_and_change_bit_cs(unsigned long nr, volatile unsigned long *ptr)
+{
+        unsigned long addr, old, new, mask;
+
+	addr = (unsigned long) ptr;
+	/* calculate address for CS */
+	addr += (nr ^ (nr & (__BITOPS_WORDSIZE - 1))) >> 3;
+	/* make XOR/test mask */
+	mask = 1UL << (nr & (__BITOPS_WORDSIZE - 1));
+	/* Do the atomic update. */
+	__BITOPS_LOOP(old, new, addr, mask, __BITOPS_XOR);
+	__BITOPS_BARRIER();
+	return (old & mask) != 0;
+}
+#endif /* CONFIG_SMP */
+
+/*
+ * fast, non-SMP set_bit routine
+ */
+static inline void __set_bit(unsigned long nr, volatile unsigned long *ptr)
+{
+	unsigned long addr;
+
+	addr = (unsigned long) ptr + ((nr ^ (__BITOPS_WORDSIZE - 8)) >> 3);
+	asm volatile(
+		"	oc	0(1,%1),0(%2)"
+		: "=m" (*(char *) addr) : "a" (addr),
+		  "a" (_oi_bitmap + (nr & 7)), "m" (*(char *) addr) : "cc" );
+}
+
+static inline void 
+__constant_set_bit(const unsigned long nr, volatile unsigned long *ptr)
+{
+	unsigned long addr;
+
+	addr = ((unsigned long) ptr) + ((nr ^ (__BITOPS_WORDSIZE - 8)) >> 3);
+	*(unsigned char *) addr |= 1 << (nr & 7);
+}
+
+#define set_bit_simple(nr,addr) \
+(__builtin_constant_p((nr)) ? \
+ __constant_set_bit((nr),(addr)) : \
+ __set_bit((nr),(addr)) )
+
+/*
+ * fast, non-SMP clear_bit routine
+ */
+static inline void 
+__clear_bit(unsigned long nr, volatile unsigned long *ptr)
+{
+	unsigned long addr;
+
+	addr = (unsigned long) ptr + ((nr ^ (__BITOPS_WORDSIZE - 8)) >> 3);
+	asm volatile(
+		"	nc	0(1,%1),0(%2)"
+		: "=m" (*(char *) addr)	: "a" (addr),
+		  "a" (_ni_bitmap + (nr & 7)), "m" (*(char *) addr) : "cc");
+}
+
+static inline void 
+__constant_clear_bit(const unsigned long nr, volatile unsigned long *ptr)
+{
+	unsigned long addr;
+
+	addr = ((unsigned long) ptr) + ((nr ^ (__BITOPS_WORDSIZE - 8)) >> 3);
+	*(unsigned char *) addr &= ~(1 << (nr & 7));
+}
+
+#define clear_bit_simple(nr,addr) \
+(__builtin_constant_p((nr)) ? \
+ __constant_clear_bit((nr),(addr)) : \
+ __clear_bit((nr),(addr)) )
+
+/* 
+ * fast, non-SMP change_bit routine 
+ */
+static inline void __change_bit(unsigned long nr, volatile unsigned long *ptr)
+{
+	unsigned long addr;
+
+	addr = (unsigned long) ptr + ((nr ^ (__BITOPS_WORDSIZE - 8)) >> 3);
+	asm volatile(
+		"	xc	0(1,%1),0(%2)"
+		:  "=m" (*(char *) addr) : "a" (addr),
+		   "a" (_oi_bitmap + (nr & 7)), "m" (*(char *) addr) : "cc" );
+}
+
+static inline void 
+__constant_change_bit(const unsigned long nr, volatile unsigned long *ptr) 
+{
+	unsigned long addr;
+
+	addr = ((unsigned long) ptr) + ((nr ^ (__BITOPS_WORDSIZE - 8)) >> 3);
+	*(unsigned char *) addr ^= 1 << (nr & 7);
+}
+
+#define change_bit_simple(nr,addr) \
+(__builtin_constant_p((nr)) ? \
+ __constant_change_bit((nr),(addr)) : \
+ __change_bit((nr),(addr)) )
+
+/*
+ * fast, non-SMP test_and_set_bit routine
+ */
+static inline int
+test_and_set_bit_simple(unsigned long nr, volatile unsigned long *ptr)
+{
+	unsigned long addr;
+	unsigned char ch;
+
+	addr = (unsigned long) ptr + ((nr ^ (__BITOPS_WORDSIZE - 8)) >> 3);
+	ch = *(unsigned char *) addr;
+	asm volatile(
+		"	oc	0(1,%1),0(%2)"
+		: "=m" (*(char *) addr)
+		: "a" (addr), "a" (_oi_bitmap + (nr & 7)),
+		  "m" (*(char *) addr) : "cc", "memory");
+	return (ch >> (nr & 7)) & 1;
+}
+#define __test_and_set_bit(X,Y)		test_and_set_bit_simple(X,Y)
+
+/*
+ * fast, non-SMP test_and_clear_bit routine
+ */
+static inline int
+test_and_clear_bit_simple(unsigned long nr, volatile unsigned long *ptr)
+{
+	unsigned long addr;
+	unsigned char ch;
+
+	addr = (unsigned long) ptr + ((nr ^ (__BITOPS_WORDSIZE - 8)) >> 3);
+	ch = *(unsigned char *) addr;
+	asm volatile(
+		"	nc	0(1,%1),0(%2)"
+		: "=m" (*(char *) addr)
+		: "a" (addr), "a" (_ni_bitmap + (nr & 7)),
+		  "m" (*(char *) addr) : "cc", "memory");
+	return (ch >> (nr & 7)) & 1;
+}
+#define __test_and_clear_bit(X,Y)	test_and_clear_bit_simple(X,Y)
+
+/*
+ * fast, non-SMP test_and_change_bit routine
+ */
+static inline int
+test_and_change_bit_simple(unsigned long nr, volatile unsigned long *ptr)
+{
+	unsigned long addr;
+	unsigned char ch;
+
+	addr = (unsigned long) ptr + ((nr ^ (__BITOPS_WORDSIZE - 8)) >> 3);
+	ch = *(unsigned char *) addr;
+	asm volatile(
+		"	xc	0(1,%1),0(%2)"
+		: "=m" (*(char *) addr)
+		: "a" (addr), "a" (_oi_bitmap + (nr & 7)),
+		  "m" (*(char *) addr) : "cc", "memory");
+	return (ch >> (nr & 7)) & 1;
+}
+#define __test_and_change_bit(X,Y)	test_and_change_bit_simple(X,Y)
+
+#ifdef CONFIG_SMP
+#define set_bit             set_bit_cs
+#define clear_bit           clear_bit_cs
+#define change_bit          change_bit_cs
+#define test_and_set_bit    test_and_set_bit_cs
+#define test_and_clear_bit  test_and_clear_bit_cs
+#define test_and_change_bit test_and_change_bit_cs
+#else
+#define set_bit             set_bit_simple
+#define clear_bit           clear_bit_simple
+#define change_bit          change_bit_simple
+#define test_and_set_bit    test_and_set_bit_simple
+#define test_and_clear_bit  test_and_clear_bit_simple
+#define test_and_change_bit test_and_change_bit_simple
+#endif
+
+
+/*
+ * This routine doesn't need to be atomic.
+ */
+
+static inline int __test_bit(unsigned long nr, const volatile unsigned long *ptr)
+{
+	unsigned long addr;
+	unsigned char ch;
+
+	addr = (unsigned long) ptr + ((nr ^ (__BITOPS_WORDSIZE - 8)) >> 3);
+	ch = *(volatile unsigned char *) addr;
+	return (ch >> (nr & 7)) & 1;
+}
+
+static inline int 
+__constant_test_bit(unsigned long nr, const volatile unsigned long *addr) {
+    return (((volatile char *) addr)
+	    [(nr^(__BITOPS_WORDSIZE-8))>>3] & (1<<(nr&7))) != 0;
+}
+
+#define test_bit(nr,addr) \
+(__builtin_constant_p((nr)) ? \
+ __constant_test_bit((nr),(addr)) : \
+ __test_bit((nr),(addr)) )
+
+/*
+ * Optimized find bit helper functions.
+ */
+
+/**
+ * __ffz_word_loop - find byte offset of first long != -1UL
+ * @addr: pointer to array of unsigned long
+ * @size: size of the array in bits
+ */
+static inline unsigned long __ffz_word_loop(const unsigned long *addr,
+					    unsigned long size)
+{
+	typedef struct { long _[__BITOPS_WORDS(size)]; } addrtype;
+	unsigned long bytes = 0;
+
+	asm volatile(
+#ifndef __s390x__
+		"	ahi	%1,-1\n"
+		"	sra	%1,5\n"
+		"	jz	1f\n"
+		"0:	c	%2,0(%0,%3)\n"
+		"	jne	1f\n"
+		"	la	%0,4(%0)\n"
+		"	brct	%1,0b\n"
+		"1:\n"
+#else
+		"	aghi	%1,-1\n"
+		"	srag	%1,%1,6\n"
+		"	jz	1f\n"
+		"0:	cg	%2,0(%0,%3)\n"
+		"	jne	1f\n"
+		"	la	%0,8(%0)\n"
+		"	brct	%1,0b\n"
+		"1:\n"
+#endif
+		: "+&a" (bytes), "+&d" (size)
+		: "d" (-1UL), "a" (addr), "m" (*(addrtype *) addr)
+		: "cc" );
+	return bytes;
+}
+
+/**
+ * __ffs_word_loop - find byte offset of first long != 0UL
+ * @addr: pointer to array of unsigned long
+ * @size: size of the array in bits
+ */
+static inline unsigned long __ffs_word_loop(const unsigned long *addr,
+					    unsigned long size)
+{
+	typedef struct { long _[__BITOPS_WORDS(size)]; } addrtype;
+	unsigned long bytes = 0;
+
+	asm volatile(
+#ifndef __s390x__
+		"	ahi	%1,-1\n"
+		"	sra	%1,5\n"
+		"	jz	1f\n"
+		"0:	c	%2,0(%0,%3)\n"
+		"	jne	1f\n"
+		"	la	%0,4(%0)\n"
+		"	brct	%1,0b\n"
+		"1:\n"
+#else
+		"	aghi	%1,-1\n"
+		"	srag	%1,%1,6\n"
+		"	jz	1f\n"
+		"0:	cg	%2,0(%0,%3)\n"
+		"	jne	1f\n"
+		"	la	%0,8(%0)\n"
+		"	brct	%1,0b\n"
+		"1:\n"
+#endif
+		: "+&a" (bytes), "+&a" (size)
+		: "d" (0UL), "a" (addr), "m" (*(addrtype *) addr)
+		: "cc" );
+	return bytes;
+}
+
+/**
+ * __ffz_word - add number of the first unset bit
+ * @nr: base value the bit number is added to
+ * @word: the word that is searched for unset bits
+ */
+static inline unsigned long __ffz_word(unsigned long nr, unsigned long word)
+{
+#ifdef __s390x__
+	if (likely((word & 0xffffffff) == 0xffffffff)) {
+		word >>= 32;
+		nr += 32;
+	}
+#endif
+	if (likely((word & 0xffff) == 0xffff)) {
+		word >>= 16;
+		nr += 16;
+	}
+	if (likely((word & 0xff) == 0xff)) {
+		word >>= 8;
+		nr += 8;
+	}
+	return nr + _zb_findmap[(unsigned char) word];
+}
+
+/**
+ * __ffs_word - add number of the first set bit
+ * @nr: base value the bit number is added to
+ * @word: the word that is searched for set bits
+ */
+static inline unsigned long __ffs_word(unsigned long nr, unsigned long word)
+{
+#ifdef __s390x__
+	if (likely((word & 0xffffffff) == 0)) {
+		word >>= 32;
+		nr += 32;
+	}
+#endif
+	if (likely((word & 0xffff) == 0)) {
+		word >>= 16;
+		nr += 16;
+	}
+	if (likely((word & 0xff) == 0)) {
+		word >>= 8;
+		nr += 8;
+	}
+	return nr + _sb_findmap[(unsigned char) word];
+}
+
+
+/**
+ * __load_ulong_be - load big endian unsigned long
+ * @p: pointer to array of unsigned long
+ * @offset: byte offset of source value in the array
+ */
+static inline unsigned long __load_ulong_be(const unsigned long *p,
+					    unsigned long offset)
+{
+	p = (unsigned long *)((unsigned long) p + offset);
+	return *p;
+}
+
+/**
+ * __load_ulong_le - load little endian unsigned long
+ * @p: pointer to array of unsigned long
+ * @offset: byte offset of source value in the array
+ */
+static inline unsigned long __load_ulong_le(const unsigned long *p,
+					    unsigned long offset)
+{
+	unsigned long word;
+
+	p = (unsigned long *)((unsigned long) p + offset);
+#ifndef __s390x__
+	asm volatile(
+		"	ic	%0,0(%1)\n"
+		"	icm	%0,2,1(%1)\n"
+		"	icm	%0,4,2(%1)\n"
+		"	icm	%0,8,3(%1)"
+		: "=&d" (word) : "a" (p), "m" (*p) : "cc");
+#else
+	asm volatile(
+		"	lrvg	%0,%1"
+		: "=d" (word) : "m" (*p) );
+#endif
+	return word;
+}
+
+/*
+ * The various find bit functions.
+ */
+
+/*
+ * ffz - find first zero in word.
+ * @word: The word to search
+ *
+ * Undefined if no zero exists, so code should check against ~0UL first.
+ */
+static inline unsigned long ffz(unsigned long word)
+{
+	return __ffz_word(0, word);
+}
+
+/**
+ * __ffs - find first bit in word.
+ * @word: The word to search
+ *
+ * Undefined if no bit exists, so code should check against 0 first.
+ */
+static inline unsigned long __ffs (unsigned long word)
+{
+	return __ffs_word(0, word);
+}
+
+/**
+ * ffs - find first bit set
+ * @x: the word to search
+ *
+ * This is defined the same way as
+ * the libc and compiler builtin ffs routines, therefore
+ * differs in spirit from the above ffz (man ffs).
+ */
+static inline int ffs(int x)
+{
+	if (!x)
+		return 0;
+	return __ffs_word(1, x);
+}
+
+/**
+ * find_first_zero_bit - find the first zero bit in a memory region
+ * @addr: The address to start the search at
+ * @size: The maximum size to search
+ *
+ * Returns the bit-number of the first zero bit, not the number of the byte
+ * containing a bit.
+ */
+static inline unsigned long find_first_zero_bit(const unsigned long *addr,
+						unsigned long size)
+{
+	unsigned long bytes, bits;
+
+        if (!size)
+                return 0;
+	bytes = __ffz_word_loop(addr, size);
+	bits = __ffz_word(bytes*8, __load_ulong_be(addr, bytes));
+	return (bits < size) ? bits : size;
+}
+
+/**
+ * find_first_bit - find the first set bit in a memory region
+ * @addr: The address to start the search at
+ * @size: The maximum size to search
+ *
+ * Returns the bit-number of the first set bit, not the number of the byte
+ * containing a bit.
+ */
+static inline unsigned long find_first_bit(const unsigned long * addr,
+					   unsigned long size)
+{
+	unsigned long bytes, bits;
+
+        if (!size)
+                return 0;
+	bytes = __ffs_word_loop(addr, size);
+	bits = __ffs_word(bytes*8, __load_ulong_be(addr, bytes));
+	return (bits < size) ? bits : size;
+}
+
+/**
+ * find_next_zero_bit - find the first zero bit in a memory region
+ * @addr: The address to base the search on
+ * @offset: The bitnumber to start searching at
+ * @size: The maximum size to search
+ */
+static inline int find_next_zero_bit (const unsigned long * addr,
+				      unsigned long size,
+				      unsigned long offset)
+{
+        const unsigned long *p;
+	unsigned long bit, set;
+
+	if (offset >= size)
+		return size;
+	bit = offset & (__BITOPS_WORDSIZE - 1);
+	offset -= bit;
+	size -= offset;
+	p = addr + offset / __BITOPS_WORDSIZE;
+	if (bit) {
+		/*
+		 * __ffz_word returns __BITOPS_WORDSIZE
+		 * if no zero bit is present in the word.
+		 */
+		set = __ffz_word(bit, *p >> bit);
+		if (set >= size)
+			return size + offset;
+		if (set < __BITOPS_WORDSIZE)
+			return set + offset;
+		offset += __BITOPS_WORDSIZE;
+		size -= __BITOPS_WORDSIZE;
+		p++;
+	}
+	return offset + find_first_zero_bit(p, size);
+}
+
+/**
+ * find_next_bit - find the first set bit in a memory region
+ * @addr: The address to base the search on
+ * @offset: The bitnumber to start searching at
+ * @size: The maximum size to search
+ */
+static inline int find_next_bit (const unsigned long * addr,
+				 unsigned long size,
+				 unsigned long offset)
+{
+        const unsigned long *p;
+	unsigned long bit, set;
+
+	if (offset >= size)
+		return size;
+	bit = offset & (__BITOPS_WORDSIZE - 1);
+	offset -= bit;
+	size -= offset;
+	p = addr + offset / __BITOPS_WORDSIZE;
+	if (bit) {
+		/*
+		 * __ffs_word returns __BITOPS_WORDSIZE
+		 * if no one bit is present in the word.
+		 */
+		set = __ffs_word(0, *p & (~0UL << bit));
+		if (set >= size)
+			return size + offset;
+		if (set < __BITOPS_WORDSIZE)
+			return set + offset;
+		offset += __BITOPS_WORDSIZE;
+		size -= __BITOPS_WORDSIZE;
+		p++;
+	}
+	return offset + find_first_bit(p, size);
+}
+
+/*
+ * Every architecture must define this function. It's the fastest
+ * way of searching a 140-bit bitmap where the first 100 bits are
+ * unlikely to be set. It's guaranteed that at least one of the 140
+ * bits is cleared.
+ */
+static inline int sched_find_first_bit(unsigned long *b)
+{
+	return find_first_bit(b, 140);
+}
+
+#include <asm-generic/bitops/fls.h>
+#include <asm-generic/bitops/__fls.h>
+#include <asm-generic/bitops/fls64.h>
+
+#include <asm-generic/bitops/hweight.h>
+#include <asm-generic/bitops/lock.h>
+
+/*
+ * ATTENTION: intel byte ordering convention for ext2 and minix !!
+ * bit 0 is the LSB of addr; bit 31 is the MSB of addr;
+ * bit 32 is the LSB of (addr+4).
+ * That combined with the little endian byte order of Intel gives the
+ * following bit order in memory:
+ *    07 06 05 04 03 02 01 00 15 14 13 12 11 10 09 08 \
+ *    23 22 21 20 19 18 17 16 31 30 29 28 27 26 25 24
+ */
+
+#define ext2_set_bit(nr, addr)       \
+	__test_and_set_bit((nr)^(__BITOPS_WORDSIZE - 8), (unsigned long *)addr)
+#define ext2_set_bit_atomic(lock, nr, addr)       \
+	test_and_set_bit((nr)^(__BITOPS_WORDSIZE - 8), (unsigned long *)addr)
+#define ext2_clear_bit(nr, addr)     \
+	__test_and_clear_bit((nr)^(__BITOPS_WORDSIZE - 8), (unsigned long *)addr)
+#define ext2_clear_bit_atomic(lock, nr, addr)     \
+	test_and_clear_bit((nr)^(__BITOPS_WORDSIZE - 8), (unsigned long *)addr)
+#define ext2_test_bit(nr, addr)      \
+	test_bit((nr)^(__BITOPS_WORDSIZE - 8), (unsigned long *)addr)
+
+static inline int ext2_find_first_zero_bit(void *vaddr, unsigned int size)
+{
+	unsigned long bytes, bits;
+
+        if (!size)
+                return 0;
+	bytes = __ffz_word_loop(vaddr, size);
+	bits = __ffz_word(bytes*8, __load_ulong_le(vaddr, bytes));
+	return (bits < size) ? bits : size;
+}
+
+static inline int ext2_find_next_zero_bit(void *vaddr, unsigned long size,
+					  unsigned long offset)
+{
+        unsigned long *addr = vaddr, *p;
+	unsigned long bit, set;
+
+        if (offset >= size)
+                return size;
+	bit = offset & (__BITOPS_WORDSIZE - 1);
+	offset -= bit;
+	size -= offset;
+	p = addr + offset / __BITOPS_WORDSIZE;
+        if (bit) {
+		/*
+		 * s390 version of ffz returns __BITOPS_WORDSIZE
+		 * if no zero bit is present in the word.
+		 */
+		set = __ffz_word(bit, __load_ulong_le(p, 0) >> bit);
+		if (set >= size)
+			return size + offset;
+		if (set < __BITOPS_WORDSIZE)
+			return set + offset;
+		offset += __BITOPS_WORDSIZE;
+		size -= __BITOPS_WORDSIZE;
+		p++;
+        }
+	return offset + ext2_find_first_zero_bit(p, size);
+}
+
+static inline unsigned long ext2_find_first_bit(void *vaddr,
+						unsigned long size)
+{
+	unsigned long bytes, bits;
+
+	if (!size)
+		return 0;
+	bytes = __ffs_word_loop(vaddr, size);
+	bits = __ffs_word(bytes*8, __load_ulong_le(vaddr, bytes));
+	return (bits < size) ? bits : size;
+}
+
+static inline int ext2_find_next_bit(void *vaddr, unsigned long size,
+				     unsigned long offset)
+{
+	unsigned long *addr = vaddr, *p;
+	unsigned long bit, set;
+
+	if (offset >= size)
+		return size;
+	bit = offset & (__BITOPS_WORDSIZE - 1);
+	offset -= bit;
+	size -= offset;
+	p = addr + offset / __BITOPS_WORDSIZE;
+	if (bit) {
+		/*
+		 * s390 version of ffz returns __BITOPS_WORDSIZE
+		 * if no zero bit is present in the word.
+		 */
+		set = __ffs_word(0, __load_ulong_le(p, 0) & (~0UL << bit));
+		if (set >= size)
+			return size + offset;
+		if (set < __BITOPS_WORDSIZE)
+			return set + offset;
+		offset += __BITOPS_WORDSIZE;
+		size -= __BITOPS_WORDSIZE;
+		p++;
+	}
+	return offset + ext2_find_first_bit(p, size);
+}
+
+#include <asm-generic/bitops/minix.h>
+
+#endif /* __KERNEL__ */
+
+#endif /* _S390_BITOPS_H */
diff --git a/include/asm-s390/bug.h b/arch/s390/include/asm/bug.h
index 384e3621e341..384e3621e341 100644
--- a/include/asm-s390/bug.h
+++ b/arch/s390/include/asm/bug.h
diff --git a/include/asm-s390/bugs.h b/arch/s390/include/asm/bugs.h
index 011f1e6a2a6c..011f1e6a2a6c 100644
--- a/include/asm-s390/bugs.h
+++ b/arch/s390/include/asm/bugs.h
diff --git a/include/asm-s390/byteorder.h b/arch/s390/include/asm/byteorder.h
index 1fe2492baa8d..1fe2492baa8d 100644
--- a/include/asm-s390/byteorder.h
+++ b/arch/s390/include/asm/byteorder.h
diff --git a/include/asm-s390/cache.h b/arch/s390/include/asm/cache.h
index 9b866816863c..9b866816863c 100644
--- a/include/asm-s390/cache.h
+++ b/arch/s390/include/asm/cache.h
diff --git a/include/asm-s390/cacheflush.h b/arch/s390/include/asm/cacheflush.h
index 49d5af916d01..49d5af916d01 100644
--- a/include/asm-s390/cacheflush.h
+++ b/arch/s390/include/asm/cacheflush.h
diff --git a/include/asm-s390/ccwdev.h b/arch/s390/include/asm/ccwdev.h
index ba007d8df941..ba007d8df941 100644
--- a/include/asm-s390/ccwdev.h
+++ b/arch/s390/include/asm/ccwdev.h
diff --git a/include/asm-s390/ccwgroup.h b/arch/s390/include/asm/ccwgroup.h
index a27f68985a79..a27f68985a79 100644
--- a/include/asm-s390/ccwgroup.h
+++ b/arch/s390/include/asm/ccwgroup.h
diff --git a/include/asm-s390/checksum.h b/arch/s390/include/asm/checksum.h
index d5a8e7c1477c..d5a8e7c1477c 100644
--- a/include/asm-s390/checksum.h
+++ b/arch/s390/include/asm/checksum.h
diff --git a/include/asm-s390/chpid.h b/arch/s390/include/asm/chpid.h
index dfe3c7f3439a..dfe3c7f3439a 100644
--- a/include/asm-s390/chpid.h
+++ b/arch/s390/include/asm/chpid.h
diff --git a/include/asm-s390/chsc.h b/arch/s390/include/asm/chsc.h
index d38d0cf62d4b..d38d0cf62d4b 100644
--- a/include/asm-s390/chsc.h
+++ b/arch/s390/include/asm/chsc.h
diff --git a/include/asm-s390/cio.h b/arch/s390/include/asm/cio.h
index 6dccb071aec3..6dccb071aec3 100644
--- a/include/asm-s390/cio.h
+++ b/arch/s390/include/asm/cio.h
diff --git a/include/asm-s390/cmb.h b/arch/s390/include/asm/cmb.h
index 50196857d27a..50196857d27a 100644
--- a/include/asm-s390/cmb.h
+++ b/arch/s390/include/asm/cmb.h
diff --git a/include/asm-s390/compat.h b/arch/s390/include/asm/compat.h
index de065b32381a..de065b32381a 100644
--- a/include/asm-s390/compat.h
+++ b/arch/s390/include/asm/compat.h
diff --git a/include/asm-s390/cpcmd.h b/arch/s390/include/asm/cpcmd.h
index 48a9eab16429..48a9eab16429 100644
--- a/include/asm-s390/cpcmd.h
+++ b/arch/s390/include/asm/cpcmd.h
diff --git a/include/asm-s390/cpu.h b/arch/s390/include/asm/cpu.h
index e5a6a9ba3adf..e5a6a9ba3adf 100644
--- a/include/asm-s390/cpu.h
+++ b/arch/s390/include/asm/cpu.h
diff --git a/include/asm-s390/cputime.h b/arch/s390/include/asm/cputime.h
index 133ce054fc89..133ce054fc89 100644
--- a/include/asm-s390/cputime.h
+++ b/arch/s390/include/asm/cputime.h
diff --git a/include/asm-s390/current.h b/arch/s390/include/asm/current.h
index 83cf36cde2da..83cf36cde2da 100644
--- a/include/asm-s390/current.h
+++ b/arch/s390/include/asm/current.h
diff --git a/include/asm-s390/dasd.h b/arch/s390/include/asm/dasd.h
index 3f002e13d024..3f002e13d024 100644
--- a/include/asm-s390/dasd.h
+++ b/arch/s390/include/asm/dasd.h
diff --git a/include/asm-s390/debug.h b/arch/s390/include/asm/debug.h
index 9450ce6e32de..9450ce6e32de 100644
--- a/include/asm-s390/debug.h
+++ b/arch/s390/include/asm/debug.h
diff --git a/include/asm-s390/delay.h b/arch/s390/include/asm/delay.h
index 78357314c450..78357314c450 100644
--- a/include/asm-s390/delay.h
+++ b/arch/s390/include/asm/delay.h
diff --git a/include/asm-s390/device.h b/arch/s390/include/asm/device.h
index d8f9872b0e2d..d8f9872b0e2d 100644
--- a/include/asm-s390/device.h
+++ b/arch/s390/include/asm/device.h
diff --git a/include/asm-s390/diag.h b/arch/s390/include/asm/diag.h
index 72b2e2f2d32d..72b2e2f2d32d 100644
--- a/include/asm-s390/diag.h
+++ b/arch/s390/include/asm/diag.h
diff --git a/include/asm-s390/div64.h b/arch/s390/include/asm/div64.h
index 6cd978cefb28..6cd978cefb28 100644
--- a/include/asm-s390/div64.h
+++ b/arch/s390/include/asm/div64.h
diff --git a/include/asm-s390/dma.h b/arch/s390/include/asm/dma.h
index 7425c6af6cd4..7425c6af6cd4 100644
--- a/include/asm-s390/dma.h
+++ b/arch/s390/include/asm/dma.h
diff --git a/include/asm-s390/ebcdic.h b/arch/s390/include/asm/ebcdic.h
index 7f6f641d32f4..7f6f641d32f4 100644
--- a/include/asm-s390/ebcdic.h
+++ b/arch/s390/include/asm/ebcdic.h
diff --git a/include/asm-s390/elf.h b/arch/s390/include/asm/elf.h
index 3cad56923815..3cad56923815 100644
--- a/include/asm-s390/elf.h
+++ b/arch/s390/include/asm/elf.h
diff --git a/include/asm-s390/emergency-restart.h b/arch/s390/include/asm/emergency-restart.h
index 108d8c48e42e..108d8c48e42e 100644
--- a/include/asm-s390/emergency-restart.h
+++ b/arch/s390/include/asm/emergency-restart.h
diff --git a/include/asm-s390/errno.h b/arch/s390/include/asm/errno.h
index e41d5b37c4d6..e41d5b37c4d6 100644
--- a/include/asm-s390/errno.h
+++ b/arch/s390/include/asm/errno.h
diff --git a/include/asm-s390/etr.h b/arch/s390/include/asm/etr.h
index 80ef58c61970..80ef58c61970 100644
--- a/include/asm-s390/etr.h
+++ b/arch/s390/include/asm/etr.h
diff --git a/include/asm-s390/extmem.h b/arch/s390/include/asm/extmem.h
index 33837d756184..33837d756184 100644
--- a/include/asm-s390/extmem.h
+++ b/arch/s390/include/asm/extmem.h
diff --git a/include/asm-s390/fb.h b/arch/s390/include/asm/fb.h
index c7df38030992..c7df38030992 100644
--- a/include/asm-s390/fb.h
+++ b/arch/s390/include/asm/fb.h
diff --git a/include/asm-s390/fcntl.h b/arch/s390/include/asm/fcntl.h
index 46ab12db5739..46ab12db5739 100644
--- a/include/asm-s390/fcntl.h
+++ b/arch/s390/include/asm/fcntl.h
diff --git a/include/asm-s390/fcx.h b/arch/s390/include/asm/fcx.h
index 8be1f3a58042..8be1f3a58042 100644
--- a/include/asm-s390/fcx.h
+++ b/arch/s390/include/asm/fcx.h
diff --git a/include/asm-s390/futex.h b/arch/s390/include/asm/futex.h
index 5c5d02de49e9..5c5d02de49e9 100644
--- a/include/asm-s390/futex.h
+++ b/arch/s390/include/asm/futex.h
diff --git a/arch/s390/include/asm/hardirq.h b/arch/s390/include/asm/hardirq.h
new file mode 100644
index 000000000000..89ec7056da28
--- /dev/null
+++ b/arch/s390/include/asm/hardirq.h
@@ -0,0 +1,51 @@
+/*
+ *  include/asm-s390/hardirq.h
+ *
+ *  S390 version
+ *    Copyright (C) 1999,2000 IBM Deutschland Entwicklung GmbH, IBM Corporation
+ *    Author(s): Martin Schwidefsky (schwidefsky@de.ibm.com),
+ *               Denis Joseph Barrow (djbarrow@de.ibm.com,barrow_dj@yahoo.com)
+ *
+ *  Derived from "include/asm-i386/hardirq.h"
+ */
+
+#ifndef __ASM_HARDIRQ_H
+#define __ASM_HARDIRQ_H
+
+#include <linux/threads.h>
+#include <linux/sched.h>
+#include <linux/cache.h>
+#include <linux/interrupt.h>
+#include <asm/lowcore.h>
+
+/* irq_cpustat_t is unused currently, but could be converted
+ * into a percpu variable instead of storing softirq_pending
+ * on the lowcore */
+typedef struct {
+	unsigned int __softirq_pending;
+} irq_cpustat_t;
+
+#define local_softirq_pending() (S390_lowcore.softirq_pending)
+
+#define __ARCH_IRQ_STAT
+#define __ARCH_HAS_DO_SOFTIRQ
+
+#define HARDIRQ_BITS	8
+
+void clock_comparator_work(void);
+
+static inline unsigned long long local_tick_disable(void)
+{
+	unsigned long long old;
+
+	old = S390_lowcore.clock_comparator;
+	S390_lowcore.clock_comparator = -1ULL;
+	return old;
+}
+
+static inline void local_tick_enable(unsigned long long comp)
+{
+	S390_lowcore.clock_comparator = comp;
+}
+
+#endif /* __ASM_HARDIRQ_H */
diff --git a/include/asm-s390/hugetlb.h b/arch/s390/include/asm/hugetlb.h
index 670a1d1745d2..670a1d1745d2 100644
--- a/include/asm-s390/hugetlb.h
+++ b/arch/s390/include/asm/hugetlb.h
diff --git a/include/asm-s390/idals.h b/arch/s390/include/asm/idals.h
index e82c10efe65a..e82c10efe65a 100644
--- a/include/asm-s390/idals.h
+++ b/arch/s390/include/asm/idals.h
diff --git a/include/asm-s390/io.h b/arch/s390/include/asm/io.h
index b7ff6afc3caa..b7ff6afc3caa 100644
--- a/include/asm-s390/io.h
+++ b/arch/s390/include/asm/io.h
diff --git a/include/asm-s390/ioctl.h b/arch/s390/include/asm/ioctl.h
index b279fe06dfe5..b279fe06dfe5 100644
--- a/include/asm-s390/ioctl.h
+++ b/arch/s390/include/asm/ioctl.h
diff --git a/include/asm-s390/ioctls.h b/arch/s390/include/asm/ioctls.h
index 40e481b1b461..40e481b1b461 100644
--- a/include/asm-s390/ioctls.h
+++ b/arch/s390/include/asm/ioctls.h
diff --git a/include/asm-s390/ipcbuf.h b/arch/s390/include/asm/ipcbuf.h
index 37f293d12c8f..37f293d12c8f 100644
--- a/include/asm-s390/ipcbuf.h
+++ b/arch/s390/include/asm/ipcbuf.h
diff --git a/include/asm-s390/ipl.h b/arch/s390/include/asm/ipl.h
index eaca6dff5405..1171e6d144a3 100644
--- a/include/asm-s390/ipl.h
+++ b/arch/s390/include/asm/ipl.h
@@ -159,7 +159,8 @@ enum diag308_vm_flags {
 };
 
 enum diag308_rc {
-	DIAG308_RC_OK	= 1,
+	DIAG308_RC_OK		= 0x0001,
+	DIAG308_RC_NOCONFIG	= 0x0102,
 };
 
 extern int diag308(unsigned long subcode, void *addr);
diff --git a/include/asm-s390/irq.h b/arch/s390/include/asm/irq.h
index 7da991a858f8..7da991a858f8 100644
--- a/include/asm-s390/irq.h
+++ b/arch/s390/include/asm/irq.h
diff --git a/include/asm-s390/irq_regs.h b/arch/s390/include/asm/irq_regs.h
index 3dd9c0b70270..3dd9c0b70270 100644
--- a/include/asm-s390/irq_regs.h
+++ b/arch/s390/include/asm/irq_regs.h
diff --git a/include/asm-s390/irqflags.h b/arch/s390/include/asm/irqflags.h
index 3f26131120b7..3f26131120b7 100644
--- a/include/asm-s390/irqflags.h
+++ b/arch/s390/include/asm/irqflags.h
diff --git a/include/asm-s390/isc.h b/arch/s390/include/asm/isc.h
index 34bb8916db4f..34bb8916db4f 100644
--- a/include/asm-s390/isc.h
+++ b/arch/s390/include/asm/isc.h
diff --git a/include/asm-s390/itcw.h b/arch/s390/include/asm/itcw.h
index a9bc5c36b32a..a9bc5c36b32a 100644
--- a/include/asm-s390/itcw.h
+++ b/arch/s390/include/asm/itcw.h
diff --git a/include/asm-s390/kdebug.h b/arch/s390/include/asm/kdebug.h
index 40db27cd6e60..40db27cd6e60 100644
--- a/include/asm-s390/kdebug.h
+++ b/arch/s390/include/asm/kdebug.h
diff --git a/arch/s390/include/asm/kexec.h b/arch/s390/include/asm/kexec.h
new file mode 100644
index 000000000000..bb729b84a21e
--- /dev/null
+++ b/arch/s390/include/asm/kexec.h
@@ -0,0 +1,43 @@
+/*
+ * include/asm-s390/kexec.h
+ *
+ * (C) Copyright IBM Corp. 2005
+ *
+ * Author(s): Rolf Adelsberger <adelsberger@de.ibm.com>
+ *
+ */
+
+#ifndef _S390_KEXEC_H
+#define _S390_KEXEC_H
+
+#ifdef __KERNEL__
+#include <asm/page.h>
+#endif
+#include <asm/processor.h>
+/*
+ * KEXEC_SOURCE_MEMORY_LIMIT maximum page get_free_page can return.
+ * I.e. Maximum page that is mapped directly into kernel memory,
+ * and kmap is not required.
+ */
+
+/* Maximum physical address we can use pages from */
+#define KEXEC_SOURCE_MEMORY_LIMIT (-1UL)
+
+/* Maximum address we can reach in physical address mode */
+#define KEXEC_DESTINATION_MEMORY_LIMIT (-1UL)
+
+/* Maximum address we can use for the control pages */
+/* Not more than 2GB */
+#define KEXEC_CONTROL_MEMORY_LIMIT (1UL<<31)
+
+/* Allocate one page for the pdp and the second for the code */
+#define KEXEC_CONTROL_PAGE_SIZE 4096
+
+/* The native architecture */
+#define KEXEC_ARCH KEXEC_ARCH_S390
+
+/* Provide a dummy definition to avoid build failures. */
+static inline void crash_setup_regs(struct pt_regs *newregs,
+					struct pt_regs *oldregs) { }
+
+#endif /*_S390_KEXEC_H */
diff --git a/include/asm-s390/kmap_types.h b/arch/s390/include/asm/kmap_types.h
index fd1574648223..fd1574648223 100644
--- a/include/asm-s390/kmap_types.h
+++ b/arch/s390/include/asm/kmap_types.h
diff --git a/include/asm-s390/kprobes.h b/arch/s390/include/asm/kprobes.h
index 330f68caffe4..330f68caffe4 100644
--- a/include/asm-s390/kprobes.h
+++ b/arch/s390/include/asm/kprobes.h
diff --git a/include/asm-s390/kvm.h b/arch/s390/include/asm/kvm.h
index d74002f95794..d74002f95794 100644
--- a/include/asm-s390/kvm.h
+++ b/arch/s390/include/asm/kvm.h
diff --git a/include/asm-s390/kvm_host.h b/arch/s390/include/asm/kvm_host.h
index 3234dd5b3511..3c55e4107dcc 100644
--- a/include/asm-s390/kvm_host.h
+++ b/arch/s390/include/asm/kvm_host.h
@@ -111,7 +111,7 @@ struct kvm_vcpu_stat {
 	u32 exit_validity;
 	u32 exit_instruction;
 	u32 instruction_lctl;
-	u32 instruction_lctg;
+	u32 instruction_lctlg;
 	u32 exit_program_interruption;
 	u32 exit_instr_and_program;
 	u32 deliver_emergency_signal;
@@ -231,5 +231,5 @@ struct kvm_arch{
 	struct kvm_s390_float_interrupt float_int;
 };
 
-extern int sie64a(struct kvm_s390_sie_block *, __u64 *);
+extern int sie64a(struct kvm_s390_sie_block *, unsigned long *);
 #endif
diff --git a/include/asm-s390/kvm_para.h b/arch/s390/include/asm/kvm_para.h
index 2c503796b619..2c503796b619 100644
--- a/include/asm-s390/kvm_para.h
+++ b/arch/s390/include/asm/kvm_para.h
diff --git a/include/asm-s390/kvm_virtio.h b/arch/s390/include/asm/kvm_virtio.h
index 5c871a990c29..146100224def 100644
--- a/include/asm-s390/kvm_virtio.h
+++ b/arch/s390/include/asm/kvm_virtio.h
@@ -50,4 +50,14 @@ struct kvm_vqconfig {
 #define KVM_S390_VIRTIO_RESET		1
 #define KVM_S390_VIRTIO_SET_STATUS	2
 
+#ifdef __KERNEL__
+/* early virtio console setup */
+#ifdef CONFIG_VIRTIO_CONSOLE
+extern void s390_virtio_console_init(void);
+#else
+static inline void s390_virtio_console_init(void)
+{
+}
+#endif /* CONFIG_VIRTIO_CONSOLE */
+#endif /* __KERNEL__ */
 #endif
diff --git a/include/asm-s390/linkage.h b/arch/s390/include/asm/linkage.h
index 291c2d01c44f..291c2d01c44f 100644
--- a/include/asm-s390/linkage.h
+++ b/arch/s390/include/asm/linkage.h
diff --git a/include/asm-s390/local.h b/arch/s390/include/asm/local.h
index c11c530f74d0..c11c530f74d0 100644
--- a/include/asm-s390/local.h
+++ b/arch/s390/include/asm/local.h
diff --git a/include/asm-s390/lowcore.h b/arch/s390/include/asm/lowcore.h
index 0bc51d52a899..0bc51d52a899 100644
--- a/include/asm-s390/lowcore.h
+++ b/arch/s390/include/asm/lowcore.h
diff --git a/include/asm-s390/mathemu.h b/arch/s390/include/asm/mathemu.h
index e8dd1ba8edb0..e8dd1ba8edb0 100644
--- a/include/asm-s390/mathemu.h
+++ b/arch/s390/include/asm/mathemu.h
diff --git a/include/asm-s390/mman.h b/arch/s390/include/asm/mman.h
index 7839767d837e..7839767d837e 100644
--- a/include/asm-s390/mman.h
+++ b/arch/s390/include/asm/mman.h
diff --git a/include/asm-s390/mmu.h b/arch/s390/include/asm/mmu.h
index 5dd5e7b3476f..5dd5e7b3476f 100644
--- a/include/asm-s390/mmu.h
+++ b/arch/s390/include/asm/mmu.h
diff --git a/include/asm-s390/mmu_context.h b/arch/s390/include/asm/mmu_context.h
index 4c2fbf48c9c4..4c2fbf48c9c4 100644
--- a/include/asm-s390/mmu_context.h
+++ b/arch/s390/include/asm/mmu_context.h
diff --git a/include/asm-s390/module.h b/arch/s390/include/asm/module.h
index 1cc1c5af705a..1cc1c5af705a 100644
--- a/include/asm-s390/module.h
+++ b/arch/s390/include/asm/module.h
diff --git a/include/asm-s390/monwriter.h b/arch/s390/include/asm/monwriter.h
index f0cbf96c52e6..f0cbf96c52e6 100644
--- a/include/asm-s390/monwriter.h
+++ b/arch/s390/include/asm/monwriter.h
diff --git a/include/asm-s390/msgbuf.h b/arch/s390/include/asm/msgbuf.h
index 1bbdee927924..1bbdee927924 100644
--- a/include/asm-s390/msgbuf.h
+++ b/arch/s390/include/asm/msgbuf.h
diff --git a/include/asm-s390/mutex.h b/arch/s390/include/asm/mutex.h
index 458c1f7fbc18..458c1f7fbc18 100644
--- a/include/asm-s390/mutex.h
+++ b/arch/s390/include/asm/mutex.h
diff --git a/include/asm-s390/page.h b/arch/s390/include/asm/page.h
index 991ba939408c..991ba939408c 100644
--- a/include/asm-s390/page.h
+++ b/arch/s390/include/asm/page.h
diff --git a/include/asm-s390/param.h b/arch/s390/include/asm/param.h
index 34aaa4603347..34aaa4603347 100644
--- a/include/asm-s390/param.h
+++ b/arch/s390/include/asm/param.h
diff --git a/include/asm-s390/pci.h b/arch/s390/include/asm/pci.h
index 42a145c9ddd6..42a145c9ddd6 100644
--- a/include/asm-s390/pci.h
+++ b/arch/s390/include/asm/pci.h
diff --git a/include/asm-s390/percpu.h b/arch/s390/include/asm/percpu.h
index 408d60b4f75b..408d60b4f75b 100644
--- a/include/asm-s390/percpu.h
+++ b/arch/s390/include/asm/percpu.h
diff --git a/include/asm-s390/pgalloc.h b/arch/s390/include/asm/pgalloc.h
index f5b2bf3d7c1d..f5b2bf3d7c1d 100644
--- a/include/asm-s390/pgalloc.h
+++ b/arch/s390/include/asm/pgalloc.h
diff --git a/include/asm-s390/pgtable.h b/arch/s390/include/asm/pgtable.h
index 0bdb704ae051..0bdb704ae051 100644
--- a/include/asm-s390/pgtable.h
+++ b/arch/s390/include/asm/pgtable.h
diff --git a/include/asm-s390/poll.h b/arch/s390/include/asm/poll.h
index c98509d3149e..c98509d3149e 100644
--- a/include/asm-s390/poll.h
+++ b/arch/s390/include/asm/poll.h
diff --git a/include/asm-s390/posix_types.h b/arch/s390/include/asm/posix_types.h
index 397d93fba3a7..397d93fba3a7 100644
--- a/include/asm-s390/posix_types.h
+++ b/arch/s390/include/asm/posix_types.h
diff --git a/include/asm-s390/processor.h b/arch/s390/include/asm/processor.h
index 4af80af2a88f..4af80af2a88f 100644
--- a/include/asm-s390/processor.h
+++ b/arch/s390/include/asm/processor.h
diff --git a/include/asm-s390/ptrace.h b/arch/s390/include/asm/ptrace.h
index af2c9ac28a07..af2c9ac28a07 100644
--- a/include/asm-s390/ptrace.h
+++ b/arch/s390/include/asm/ptrace.h
diff --git a/include/asm-s390/qdio.h b/arch/s390/include/asm/qdio.h
index 6813772171f2..6813772171f2 100644
--- a/include/asm-s390/qdio.h
+++ b/arch/s390/include/asm/qdio.h
diff --git a/include/asm-s390/qeth.h b/arch/s390/include/asm/qeth.h
index 930d378ef75a..930d378ef75a 100644
--- a/include/asm-s390/qeth.h
+++ b/arch/s390/include/asm/qeth.h
diff --git a/include/asm-s390/reset.h b/arch/s390/include/asm/reset.h
index f584f4a52581..f584f4a52581 100644
--- a/include/asm-s390/reset.h
+++ b/arch/s390/include/asm/reset.h
diff --git a/include/asm-s390/resource.h b/arch/s390/include/asm/resource.h
index 366c01de04f2..366c01de04f2 100644
--- a/include/asm-s390/resource.h
+++ b/arch/s390/include/asm/resource.h
diff --git a/include/asm-s390/rwsem.h b/arch/s390/include/asm/rwsem.h
index 9d2a17971805..9d2a17971805 100644
--- a/include/asm-s390/rwsem.h
+++ b/arch/s390/include/asm/rwsem.h
diff --git a/include/asm-s390/s390_ext.h b/arch/s390/include/asm/s390_ext.h
index 2afc060266a2..2afc060266a2 100644
--- a/include/asm-s390/s390_ext.h
+++ b/arch/s390/include/asm/s390_ext.h
diff --git a/include/asm-s390/s390_rdev.h b/arch/s390/include/asm/s390_rdev.h
index 6fa20442a48c..6fa20442a48c 100644
--- a/include/asm-s390/s390_rdev.h
+++ b/arch/s390/include/asm/s390_rdev.h
diff --git a/include/asm-s390/scatterlist.h b/arch/s390/include/asm/scatterlist.h
index 29ec8e28c8df..29ec8e28c8df 100644
--- a/include/asm-s390/scatterlist.h
+++ b/arch/s390/include/asm/scatterlist.h
diff --git a/include/asm-s390/schid.h b/arch/s390/include/asm/schid.h
index 7bdc0fe15691..825503cf3dc2 100644
--- a/include/asm-s390/schid.h
+++ b/arch/s390/include/asm/schid.h
@@ -11,6 +11,7 @@ struct subchannel_id {
 } __attribute__ ((packed, aligned(4)));
 
 #ifdef __KERNEL__
+#include <linux/string.h>
 
 /* Helper function for sane state of pre-allocated subchannel_id. */
 static inline void
diff --git a/include/asm-s390/sclp.h b/arch/s390/include/asm/sclp.h
index fed7bee650a0..fed7bee650a0 100644
--- a/include/asm-s390/sclp.h
+++ b/arch/s390/include/asm/sclp.h
diff --git a/include/asm-s390/sections.h b/arch/s390/include/asm/sections.h
index fbd9116eb17b..fbd9116eb17b 100644
--- a/include/asm-s390/sections.h
+++ b/arch/s390/include/asm/sections.h
diff --git a/include/asm-s390/segment.h b/arch/s390/include/asm/segment.h
index 8bfce3475b1c..8bfce3475b1c 100644
--- a/include/asm-s390/segment.h
+++ b/arch/s390/include/asm/segment.h
diff --git a/include/asm-s390/sembuf.h b/arch/s390/include/asm/sembuf.h
index 32626b0cac4b..32626b0cac4b 100644
--- a/include/asm-s390/sembuf.h
+++ b/arch/s390/include/asm/sembuf.h
diff --git a/arch/s390/include/asm/setup.h b/arch/s390/include/asm/setup.h
new file mode 100644
index 000000000000..2bd9faeb3919
--- /dev/null
+++ b/arch/s390/include/asm/setup.h
@@ -0,0 +1,140 @@
+/*
+ *  include/asm-s390/setup.h
+ *
+ *  S390 version
+ *    Copyright IBM Corp. 1999,2006
+ */
+
+#ifndef _ASM_S390_SETUP_H
+#define _ASM_S390_SETUP_H
+
+#define COMMAND_LINE_SIZE	1024
+
+#define ARCH_COMMAND_LINE_SIZE	896
+
+#ifdef __KERNEL__
+
+#include <asm/types.h>
+
+#define PARMAREA		0x10400
+#define MEMORY_CHUNKS		256
+
+#ifndef __ASSEMBLY__
+
+#ifndef __s390x__
+#define IPL_DEVICE        (*(unsigned long *)  (0x10404))
+#define INITRD_START      (*(unsigned long *)  (0x1040C))
+#define INITRD_SIZE       (*(unsigned long *)  (0x10414))
+#else /* __s390x__ */
+#define IPL_DEVICE        (*(unsigned long *)  (0x10400))
+#define INITRD_START      (*(unsigned long *)  (0x10408))
+#define INITRD_SIZE       (*(unsigned long *)  (0x10410))
+#endif /* __s390x__ */
+#define COMMAND_LINE      ((char *)            (0x10480))
+
+#define CHUNK_READ_WRITE 0
+#define CHUNK_READ_ONLY  1
+
+struct mem_chunk {
+	unsigned long addr;
+	unsigned long size;
+	int type;
+};
+
+extern struct mem_chunk memory_chunk[];
+extern unsigned long real_memory_size;
+
+void detect_memory_layout(struct mem_chunk chunk[]);
+
+#ifdef CONFIG_S390_SWITCH_AMODE
+extern unsigned int switch_amode;
+#else
+#define switch_amode	(0)
+#endif
+
+#ifdef CONFIG_S390_EXEC_PROTECT
+extern unsigned int s390_noexec;
+#else
+#define s390_noexec	(0)
+#endif
+
+/*
+ * Machine features detected in head.S
+ */
+extern unsigned long machine_flags;
+
+#define MACHINE_FLAG_VM		(1UL << 0)
+#define MACHINE_FLAG_IEEE	(1UL << 1)
+#define MACHINE_FLAG_CSP	(1UL << 3)
+#define MACHINE_FLAG_MVPG	(1UL << 4)
+#define MACHINE_FLAG_DIAG44	(1UL << 5)
+#define MACHINE_FLAG_IDTE	(1UL << 6)
+#define MACHINE_FLAG_DIAG9C	(1UL << 7)
+#define MACHINE_FLAG_MVCOS	(1UL << 8)
+#define MACHINE_FLAG_KVM	(1UL << 9)
+#define MACHINE_FLAG_HPAGE	(1UL << 10)
+#define MACHINE_FLAG_PFMF	(1UL << 11)
+
+#define MACHINE_IS_VM		(machine_flags & MACHINE_FLAG_VM)
+#define MACHINE_IS_KVM		(machine_flags & MACHINE_FLAG_KVM)
+#define MACHINE_HAS_DIAG9C	(machine_flags & MACHINE_FLAG_DIAG9C)
+
+#ifndef __s390x__
+#define MACHINE_HAS_IEEE	(machine_flags & MACHINE_FLAG_IEEE)
+#define MACHINE_HAS_CSP		(machine_flags & MACHINE_FLAG_CSP)
+#define MACHINE_HAS_IDTE	(0)
+#define MACHINE_HAS_DIAG44	(1)
+#define MACHINE_HAS_MVPG	(machine_flags & MACHINE_FLAG_MVPG)
+#define MACHINE_HAS_MVCOS	(0)
+#define MACHINE_HAS_HPAGE	(0)
+#define MACHINE_HAS_PFMF	(0)
+#else /* __s390x__ */
+#define MACHINE_HAS_IEEE	(1)
+#define MACHINE_HAS_CSP		(1)
+#define MACHINE_HAS_IDTE	(machine_flags & MACHINE_FLAG_IDTE)
+#define MACHINE_HAS_DIAG44	(machine_flags & MACHINE_FLAG_DIAG44)
+#define MACHINE_HAS_MVPG	(1)
+#define MACHINE_HAS_MVCOS	(machine_flags & MACHINE_FLAG_MVCOS)
+#define MACHINE_HAS_HPAGE	(machine_flags & MACHINE_FLAG_HPAGE)
+#define MACHINE_HAS_PFMF	(machine_flags & MACHINE_FLAG_PFMF)
+#endif /* __s390x__ */
+
+#define ZFCPDUMP_HSA_SIZE	(32UL<<20)
+
+/*
+ * Console mode. Override with conmode=
+ */
+extern unsigned int console_mode;
+extern unsigned int console_devno;
+extern unsigned int console_irq;
+
+extern char vmhalt_cmd[];
+extern char vmpoff_cmd[];
+
+#define CONSOLE_IS_UNDEFINED	(console_mode == 0)
+#define CONSOLE_IS_SCLP		(console_mode == 1)
+#define CONSOLE_IS_3215		(console_mode == 2)
+#define CONSOLE_IS_3270		(console_mode == 3)
+#define SET_CONSOLE_SCLP	do { console_mode = 1; } while (0)
+#define SET_CONSOLE_3215	do { console_mode = 2; } while (0)
+#define SET_CONSOLE_3270	do { console_mode = 3; } while (0)
+
+#define NSS_NAME_SIZE	8
+extern char kernel_nss_name[];
+
+#else /* __ASSEMBLY__ */
+
+#ifndef __s390x__
+#define IPL_DEVICE        0x10404
+#define INITRD_START      0x1040C
+#define INITRD_SIZE       0x10414
+#else /* __s390x__ */
+#define IPL_DEVICE        0x10400
+#define INITRD_START      0x10408
+#define INITRD_SIZE       0x10410
+#endif /* __s390x__ */
+#define COMMAND_LINE      0x10480
+
+#endif /* __ASSEMBLY__ */
+#endif /* __KERNEL__ */
+#endif /* _ASM_S390_SETUP_H */
diff --git a/include/asm-s390/sfp-machine.h b/arch/s390/include/asm/sfp-machine.h
index 4e16aede4b06..4e16aede4b06 100644
--- a/include/asm-s390/sfp-machine.h
+++ b/arch/s390/include/asm/sfp-machine.h
diff --git a/include/asm-s390/sfp-util.h b/arch/s390/include/asm/sfp-util.h
index 0addc6466d95..0addc6466d95 100644
--- a/include/asm-s390/sfp-util.h
+++ b/arch/s390/include/asm/sfp-util.h
diff --git a/include/asm-s390/shmbuf.h b/arch/s390/include/asm/shmbuf.h
index eed2e280ce37..eed2e280ce37 100644
--- a/include/asm-s390/shmbuf.h
+++ b/arch/s390/include/asm/shmbuf.h
diff --git a/include/asm-s390/shmparam.h b/arch/s390/include/asm/shmparam.h
index c2e0c0508e73..c2e0c0508e73 100644
--- a/include/asm-s390/shmparam.h
+++ b/arch/s390/include/asm/shmparam.h
diff --git a/include/asm-s390/sigcontext.h b/arch/s390/include/asm/sigcontext.h
index aeb6e0b13329..aeb6e0b13329 100644
--- a/include/asm-s390/sigcontext.h
+++ b/arch/s390/include/asm/sigcontext.h
diff --git a/include/asm-s390/siginfo.h b/arch/s390/include/asm/siginfo.h
index e0ff1ab054be..e0ff1ab054be 100644
--- a/include/asm-s390/siginfo.h
+++ b/arch/s390/include/asm/siginfo.h
diff --git a/include/asm-s390/signal.h b/arch/s390/include/asm/signal.h
index f6cfddb278cb..f6cfddb278cb 100644
--- a/include/asm-s390/signal.h
+++ b/arch/s390/include/asm/signal.h
diff --git a/include/asm-s390/sigp.h b/arch/s390/include/asm/sigp.h
index e16d56f8dfe1..e16d56f8dfe1 100644
--- a/include/asm-s390/sigp.h
+++ b/arch/s390/include/asm/sigp.h
diff --git a/include/asm-s390/smp.h b/arch/s390/include/asm/smp.h
index ae89cf2478fc..ae89cf2478fc 100644
--- a/include/asm-s390/smp.h
+++ b/arch/s390/include/asm/smp.h
diff --git a/include/asm-s390/socket.h b/arch/s390/include/asm/socket.h
index c786ab623b2d..c786ab623b2d 100644
--- a/include/asm-s390/socket.h
+++ b/arch/s390/include/asm/socket.h
diff --git a/include/asm-s390/sockios.h b/arch/s390/include/asm/sockios.h
index f4fc16c7da59..f4fc16c7da59 100644
--- a/include/asm-s390/sockios.h
+++ b/arch/s390/include/asm/sockios.h
diff --git a/include/asm-s390/sparsemem.h b/arch/s390/include/asm/sparsemem.h
index 545d219e6a2d..545d219e6a2d 100644
--- a/include/asm-s390/sparsemem.h
+++ b/arch/s390/include/asm/sparsemem.h
diff --git a/include/asm-s390/spinlock.h b/arch/s390/include/asm/spinlock.h
index df84ae96915f..df84ae96915f 100644
--- a/include/asm-s390/spinlock.h
+++ b/arch/s390/include/asm/spinlock.h
diff --git a/include/asm-s390/spinlock_types.h b/arch/s390/include/asm/spinlock_types.h
index 654abc40de04..654abc40de04 100644
--- a/include/asm-s390/spinlock_types.h
+++ b/arch/s390/include/asm/spinlock_types.h
diff --git a/include/asm-s390/stat.h b/arch/s390/include/asm/stat.h
index d92959eebb65..d92959eebb65 100644
--- a/include/asm-s390/stat.h
+++ b/arch/s390/include/asm/stat.h
diff --git a/include/asm-s390/statfs.h b/arch/s390/include/asm/statfs.h
index 099a45579190..099a45579190 100644
--- a/include/asm-s390/statfs.h
+++ b/arch/s390/include/asm/statfs.h
diff --git a/include/asm-s390/string.h b/arch/s390/include/asm/string.h
index d074673a6d9b..d074673a6d9b 100644
--- a/include/asm-s390/string.h
+++ b/arch/s390/include/asm/string.h
diff --git a/include/asm-s390/suspend.h b/arch/s390/include/asm/suspend.h
index 1f34580e67a7..1f34580e67a7 100644
--- a/include/asm-s390/suspend.h
+++ b/arch/s390/include/asm/suspend.h
diff --git a/include/asm-s390/sysinfo.h b/arch/s390/include/asm/sysinfo.h
index 79d01343f8b0..79d01343f8b0 100644
--- a/include/asm-s390/sysinfo.h
+++ b/arch/s390/include/asm/sysinfo.h
diff --git a/include/asm-s390/system.h b/arch/s390/include/asm/system.h
index 819e7d99ca0c..819e7d99ca0c 100644
--- a/include/asm-s390/system.h
+++ b/arch/s390/include/asm/system.h
diff --git a/include/asm-s390/tape390.h b/arch/s390/include/asm/tape390.h
index 884fba48f1ff..884fba48f1ff 100644
--- a/include/asm-s390/tape390.h
+++ b/arch/s390/include/asm/tape390.h
diff --git a/include/asm-s390/termbits.h b/arch/s390/include/asm/termbits.h
index 58731853d529..58731853d529 100644
--- a/include/asm-s390/termbits.h
+++ b/arch/s390/include/asm/termbits.h
diff --git a/include/asm-s390/termios.h b/arch/s390/include/asm/termios.h
index 67f66278f533..67f66278f533 100644
--- a/include/asm-s390/termios.h
+++ b/arch/s390/include/asm/termios.h
diff --git a/arch/s390/include/asm/thread_info.h b/arch/s390/include/asm/thread_info.h
new file mode 100644
index 000000000000..91a8f93ad355
--- /dev/null
+++ b/arch/s390/include/asm/thread_info.h
@@ -0,0 +1,118 @@
+/*
+ *  include/asm-s390/thread_info.h
+ *
+ *  S390 version
+ *    Copyright (C) IBM Corp. 2002,2006
+ *    Author(s): Martin Schwidefsky (schwidefsky@de.ibm.com)
+ */
+
+#ifndef _ASM_THREAD_INFO_H
+#define _ASM_THREAD_INFO_H
+
+#ifdef __KERNEL__
+
+/*
+ * Size of kernel stack for each process
+ */
+#ifndef __s390x__
+#ifndef __SMALL_STACK
+#define THREAD_ORDER 1
+#define ASYNC_ORDER  1
+#else
+#define THREAD_ORDER 0
+#define ASYNC_ORDER  0
+#endif
+#else /* __s390x__ */
+#ifndef __SMALL_STACK
+#define THREAD_ORDER 2
+#define ASYNC_ORDER  2
+#else
+#define THREAD_ORDER 1
+#define ASYNC_ORDER  1
+#endif
+#endif /* __s390x__ */
+
+#define THREAD_SIZE (PAGE_SIZE << THREAD_ORDER)
+#define ASYNC_SIZE  (PAGE_SIZE << ASYNC_ORDER)
+
+#ifndef __ASSEMBLY__
+#include <asm/processor.h>
+#include <asm/lowcore.h>
+
+/*
+ * low level task data that entry.S needs immediate access to
+ * - this struct should fit entirely inside of one cache line
+ * - this struct shares the supervisor stack pages
+ * - if the contents of this structure are changed, the assembly constants must also be changed
+ */
+struct thread_info {
+	struct task_struct	*task;		/* main task structure */
+	struct exec_domain	*exec_domain;	/* execution domain */
+	unsigned long		flags;		/* low level flags */
+	unsigned int		cpu;		/* current CPU */
+	int			preempt_count;	/* 0 => preemptable, <0 => BUG */
+	struct restart_block	restart_block;
+};
+
+/*
+ * macros/functions for gaining access to the thread information structure
+ */
+#define INIT_THREAD_INFO(tsk)			\
+{						\
+	.task		= &tsk,			\
+	.exec_domain	= &default_exec_domain,	\
+	.flags		= 0,			\
+	.cpu		= 0,			\
+	.preempt_count	= 1,			\
+	.restart_block	= {			\
+		.fn = do_no_restart_syscall,	\
+	},					\
+}
+
+#define init_thread_info	(init_thread_union.thread_info)
+#define init_stack		(init_thread_union.stack)
+
+/* how to get the thread information struct from C */
+static inline struct thread_info *current_thread_info(void)
+{
+	return (struct thread_info *)((*(unsigned long *) __LC_KERNEL_STACK)-THREAD_SIZE);
+}
+
+#define THREAD_SIZE_ORDER THREAD_ORDER
+
+#endif
+
+/*
+ * thread information flags bit numbers
+ */
+#define TIF_SYSCALL_TRACE	0	/* syscall trace active */
+#define TIF_SIGPENDING		2	/* signal pending */
+#define TIF_NEED_RESCHED	3	/* rescheduling necessary */
+#define TIF_RESTART_SVC		4	/* restart svc with new svc number */
+#define TIF_SYSCALL_AUDIT	5	/* syscall auditing active */
+#define TIF_SINGLE_STEP		6	/* deliver sigtrap on return to user */
+#define TIF_MCCK_PENDING	7	/* machine check handling is pending */
+#define TIF_USEDFPU		16	/* FPU was used by this task this quantum (SMP) */
+#define TIF_POLLING_NRFLAG	17	/* true if poll_idle() is polling 
+					   TIF_NEED_RESCHED */
+#define TIF_31BIT		18	/* 32bit process */ 
+#define TIF_MEMDIE		19
+#define TIF_RESTORE_SIGMASK	20	/* restore signal mask in do_signal() */
+
+#define _TIF_SYSCALL_TRACE	(1<<TIF_SYSCALL_TRACE)
+#define _TIF_RESTORE_SIGMASK	(1<<TIF_RESTORE_SIGMASK)
+#define _TIF_SIGPENDING		(1<<TIF_SIGPENDING)
+#define _TIF_NEED_RESCHED	(1<<TIF_NEED_RESCHED)
+#define _TIF_RESTART_SVC	(1<<TIF_RESTART_SVC)
+#define _TIF_SYSCALL_AUDIT	(1<<TIF_SYSCALL_AUDIT)
+#define _TIF_SINGLE_STEP	(1<<TIF_SINGLE_STEP)
+#define _TIF_MCCK_PENDING	(1<<TIF_MCCK_PENDING)
+#define _TIF_USEDFPU		(1<<TIF_USEDFPU)
+#define _TIF_POLLING_NRFLAG	(1<<TIF_POLLING_NRFLAG)
+#define _TIF_31BIT		(1<<TIF_31BIT)
+
+#endif /* __KERNEL__ */
+
+#define PREEMPT_ACTIVE		0x4000000
+
+#endif /* _ASM_THREAD_INFO_H */
diff --git a/include/asm-s390/timer.h b/arch/s390/include/asm/timer.h
index d98d79e35cd6..d98d79e35cd6 100644
--- a/include/asm-s390/timer.h
+++ b/arch/s390/include/asm/timer.h
diff --git a/include/asm-s390/timex.h b/arch/s390/include/asm/timex.h
index d744c3d62de5..d744c3d62de5 100644
--- a/include/asm-s390/timex.h
+++ b/arch/s390/include/asm/timex.h
diff --git a/include/asm-s390/tlb.h b/arch/s390/include/asm/tlb.h
index 3d8a96d39d9d..3d8a96d39d9d 100644
--- a/include/asm-s390/tlb.h
+++ b/arch/s390/include/asm/tlb.h
diff --git a/include/asm-s390/tlbflush.h b/arch/s390/include/asm/tlbflush.h
index d60394b9745e..d60394b9745e 100644
--- a/include/asm-s390/tlbflush.h
+++ b/arch/s390/include/asm/tlbflush.h
diff --git a/include/asm-s390/todclk.h b/arch/s390/include/asm/todclk.h
index c7f62055488a..c7f62055488a 100644
--- a/include/asm-s390/todclk.h
+++ b/arch/s390/include/asm/todclk.h
diff --git a/include/asm-s390/topology.h b/arch/s390/include/asm/topology.h
index d96c91643458..d96c91643458 100644
--- a/include/asm-s390/topology.h
+++ b/arch/s390/include/asm/topology.h
diff --git a/include/asm-s390/types.h b/arch/s390/include/asm/types.h
index 41c547656130..41c547656130 100644
--- a/include/asm-s390/types.h
+++ b/arch/s390/include/asm/types.h
diff --git a/include/asm-s390/uaccess.h b/arch/s390/include/asm/uaccess.h
index 0235970278f0..0235970278f0 100644
--- a/include/asm-s390/uaccess.h
+++ b/arch/s390/include/asm/uaccess.h
diff --git a/include/asm-s390/ucontext.h b/arch/s390/include/asm/ucontext.h
index d69bec0b03f5..d69bec0b03f5 100644
--- a/include/asm-s390/ucontext.h
+++ b/arch/s390/include/asm/ucontext.h
diff --git a/include/asm-s390/unaligned.h b/arch/s390/include/asm/unaligned.h
index da9627afe5d8..da9627afe5d8 100644
--- a/include/asm-s390/unaligned.h
+++ b/arch/s390/include/asm/unaligned.h
diff --git a/arch/s390/include/asm/unistd.h b/arch/s390/include/asm/unistd.h
new file mode 100644
index 000000000000..c8ad350d1444
--- /dev/null
+++ b/arch/s390/include/asm/unistd.h
@@ -0,0 +1,411 @@
+/*
+ *  include/asm-s390/unistd.h
+ *
+ *  S390 version
+ *
+ *  Derived from "include/asm-i386/unistd.h"
+ */
+
+#ifndef _ASM_S390_UNISTD_H_
+#define _ASM_S390_UNISTD_H_
+
+/*
+ * This file contains the system call numbers.
+ */
+
+#define __NR_exit                 1
+#define __NR_fork                 2
+#define __NR_read                 3
+#define __NR_write                4
+#define __NR_open                 5
+#define __NR_close                6
+#define __NR_restart_syscall	  7
+#define __NR_creat                8
+#define __NR_link                 9
+#define __NR_unlink              10
+#define __NR_execve              11
+#define __NR_chdir               12
+#define __NR_mknod               14
+#define __NR_chmod               15
+#define __NR_lseek               19
+#define __NR_getpid              20
+#define __NR_mount               21
+#define __NR_umount              22
+#define __NR_ptrace              26
+#define __NR_alarm               27
+#define __NR_pause               29
+#define __NR_utime               30
+#define __NR_access              33
+#define __NR_nice                34
+#define __NR_sync                36
+#define __NR_kill                37
+#define __NR_rename              38
+#define __NR_mkdir               39
+#define __NR_rmdir               40
+#define __NR_dup                 41
+#define __NR_pipe                42
+#define __NR_times               43
+#define __NR_brk                 45
+#define __NR_signal              48
+#define __NR_acct                51
+#define __NR_umount2             52
+#define __NR_ioctl               54
+#define __NR_fcntl               55
+#define __NR_setpgid             57
+#define __NR_umask               60
+#define __NR_chroot              61
+#define __NR_ustat               62
+#define __NR_dup2                63
+#define __NR_getppid             64
+#define __NR_getpgrp             65
+#define __NR_setsid              66
+#define __NR_sigaction           67
+#define __NR_sigsuspend          72
+#define __NR_sigpending          73
+#define __NR_sethostname         74
+#define __NR_setrlimit           75
+#define __NR_getrusage           77
+#define __NR_gettimeofday        78
+#define __NR_settimeofday        79
+#define __NR_symlink             83
+#define __NR_readlink            85
+#define __NR_uselib              86
+#define __NR_swapon              87
+#define __NR_reboot              88
+#define __NR_readdir             89
+#define __NR_mmap                90
+#define __NR_munmap              91
+#define __NR_truncate            92
+#define __NR_ftruncate           93
+#define __NR_fchmod              94
+#define __NR_getpriority         96
+#define __NR_setpriority         97
+#define __NR_statfs              99
+#define __NR_fstatfs            100
+#define __NR_socketcall         102
+#define __NR_syslog             103
+#define __NR_setitimer          104
+#define __NR_getitimer          105
+#define __NR_stat               106
+#define __NR_lstat              107
+#define __NR_fstat              108
+#define __NR_lookup_dcookie     110
+#define __NR_vhangup            111
+#define __NR_idle               112
+#define __NR_wait4              114
+#define __NR_swapoff            115
+#define __NR_sysinfo            116
+#define __NR_ipc                117
+#define __NR_fsync              118
+#define __NR_sigreturn          119
+#define __NR_clone              120
+#define __NR_setdomainname      121
+#define __NR_uname              122
+#define __NR_adjtimex           124
+#define __NR_mprotect           125
+#define __NR_sigprocmask        126
+#define __NR_create_module      127
+#define __NR_init_module        128
+#define __NR_delete_module      129
+#define __NR_get_kernel_syms    130
+#define __NR_quotactl           131
+#define __NR_getpgid            132
+#define __NR_fchdir             133
+#define __NR_bdflush            134
+#define __NR_sysfs              135
+#define __NR_personality        136
+#define __NR_afs_syscall        137 /* Syscall for Andrew File System */
+#define __NR_getdents           141
+#define __NR_flock              143
+#define __NR_msync              144
+#define __NR_readv              145
+#define __NR_writev             146
+#define __NR_getsid             147
+#define __NR_fdatasync          148
+#define __NR__sysctl            149
+#define __NR_mlock              150
+#define __NR_munlock            151
+#define __NR_mlockall           152
+#define __NR_munlockall         153
+#define __NR_sched_setparam             154
+#define __NR_sched_getparam             155
+#define __NR_sched_setscheduler         156
+#define __NR_sched_getscheduler         157
+#define __NR_sched_yield                158
+#define __NR_sched_get_priority_max     159
+#define __NR_sched_get_priority_min     160
+#define __NR_sched_rr_get_interval      161
+#define __NR_nanosleep          162
+#define __NR_mremap             163
+#define __NR_query_module       167
+#define __NR_poll               168
+#define __NR_nfsservctl         169
+#define __NR_prctl              172
+#define __NR_rt_sigreturn       173
+#define __NR_rt_sigaction       174
+#define __NR_rt_sigprocmask     175
+#define __NR_rt_sigpending      176
+#define __NR_rt_sigtimedwait    177
+#define __NR_rt_sigqueueinfo    178
+#define __NR_rt_sigsuspend      179
+#define __NR_pread64            180
+#define __NR_pwrite64           181
+#define __NR_getcwd             183
+#define __NR_capget             184
+#define __NR_capset             185
+#define __NR_sigaltstack        186
+#define __NR_sendfile           187
+#define __NR_getpmsg		188
+#define __NR_putpmsg		189
+#define __NR_vfork		190
+#define __NR_pivot_root         217
+#define __NR_mincore            218
+#define __NR_madvise            219
+#define __NR_getdents64		220
+#define __NR_readahead		222
+#define __NR_setxattr		224
+#define __NR_lsetxattr		225
+#define __NR_fsetxattr		226
+#define __NR_getxattr		227
+#define __NR_lgetxattr		228
+#define __NR_fgetxattr		229
+#define __NR_listxattr		230
+#define __NR_llistxattr		231
+#define __NR_flistxattr		232
+#define __NR_removexattr	233
+#define __NR_lremovexattr	234
+#define __NR_fremovexattr	235
+#define __NR_gettid		236
+#define __NR_tkill		237
+#define __NR_futex		238
+#define __NR_sched_setaffinity	239
+#define __NR_sched_getaffinity	240
+#define __NR_tgkill		241
+/* Number 242 is reserved for tux */
+#define __NR_io_setup		243
+#define __NR_io_destroy		244
+#define __NR_io_getevents	245
+#define __NR_io_submit		246
+#define __NR_io_cancel		247
+#define __NR_exit_group		248
+#define __NR_epoll_create	249
+#define __NR_epoll_ctl		250
+#define __NR_epoll_wait		251
+#define __NR_set_tid_address	252
+#define __NR_fadvise64		253
+#define __NR_timer_create	254
+#define __NR_timer_settime	(__NR_timer_create+1)
+#define __NR_timer_gettime	(__NR_timer_create+2)
+#define __NR_timer_getoverrun	(__NR_timer_create+3)
+#define __NR_timer_delete	(__NR_timer_create+4)
+#define __NR_clock_settime	(__NR_timer_create+5)
+#define __NR_clock_gettime	(__NR_timer_create+6)
+#define __NR_clock_getres	(__NR_timer_create+7)
+#define __NR_clock_nanosleep	(__NR_timer_create+8)
+/* Number 263 is reserved for vserver */
+#define __NR_statfs64		265
+#define __NR_fstatfs64		266
+#define __NR_remap_file_pages	267
+/* Number 268 is reserved for new sys_mbind */
+/* Number 269 is reserved for new sys_get_mempolicy */
+/* Number 270 is reserved for new sys_set_mempolicy */
+#define __NR_mq_open		271
+#define __NR_mq_unlink		272
+#define __NR_mq_timedsend	273
+#define __NR_mq_timedreceive	274
+#define __NR_mq_notify		275
+#define __NR_mq_getsetattr	276
+#define __NR_kexec_load		277
+#define __NR_add_key		278
+#define __NR_request_key	279
+#define __NR_keyctl		280
+#define __NR_waitid		281
+#define __NR_ioprio_set		282
+#define __NR_ioprio_get		283
+#define __NR_inotify_init	284
+#define __NR_inotify_add_watch	285
+#define __NR_inotify_rm_watch	286
+/* Number 287 is reserved for new sys_migrate_pages */
+#define __NR_openat		288
+#define __NR_mkdirat		289
+#define __NR_mknodat		290
+#define __NR_fchownat		291
+#define __NR_futimesat		292
+#define __NR_unlinkat		294
+#define __NR_renameat		295
+#define __NR_linkat		296
+#define __NR_symlinkat		297
+#define __NR_readlinkat		298
+#define __NR_fchmodat		299
+#define __NR_faccessat		300
+#define __NR_pselect6		301
+#define __NR_ppoll		302
+#define __NR_unshare		303
+#define __NR_set_robust_list	304
+#define __NR_get_robust_list	305
+#define __NR_splice		306
+#define __NR_sync_file_range	307
+#define __NR_tee		308
+#define __NR_vmsplice		309
+/* Number 310 is reserved for new sys_move_pages */
+#define __NR_getcpu		311
+#define __NR_epoll_pwait	312
+#define __NR_utimes		313
+#define __NR_fallocate		314
+#define __NR_utimensat		315
+#define __NR_signalfd		316
+#define __NR_timerfd		317
+#define __NR_eventfd		318
+#define __NR_timerfd_create	319
+#define __NR_timerfd_settime	320
+#define __NR_timerfd_gettime	321
+#define __NR_signalfd4		322
+#define __NR_eventfd2		323
+#define __NR_inotify_init1	324
+#define __NR_pipe2		325
+#define __NR_dup3		326
+#define __NR_epoll_create1	327
+#define NR_syscalls 328
+
+/* 
+ * There are some system calls that are not present on 64 bit, some
+ * have a different name although they do the same (e.g. __NR_chown32
+ * is __NR_chown on 64 bit).
+ */
+#ifndef __s390x__
+
+#define __NR_time		 13
+#define __NR_lchown		 16
+#define __NR_setuid		 23
+#define __NR_getuid		 24
+#define __NR_stime		 25
+#define __NR_setgid		 46
+#define __NR_getgid		 47
+#define __NR_geteuid		 49
+#define __NR_getegid		 50
+#define __NR_setreuid		 70
+#define __NR_setregid		 71
+#define __NR_getrlimit		 76
+#define __NR_getgroups		 80
+#define __NR_setgroups		 81
+#define __NR_fchown		 95
+#define __NR_ioperm		101
+#define __NR_setfsuid		138
+#define __NR_setfsgid		139
+#define __NR__llseek		140
+#define __NR__newselect 	142
+#define __NR_setresuid		164
+#define __NR_getresuid		165
+#define __NR_setresgid		170
+#define __NR_getresgid		171
+#define __NR_chown		182
+#define __NR_ugetrlimit		191	/* SuS compliant getrlimit */
+#define __NR_mmap2		192
+#define __NR_truncate64		193
+#define __NR_ftruncate64	194
+#define __NR_stat64		195
+#define __NR_lstat64		196
+#define __NR_fstat64		197
+#define __NR_lchown32		198
+#define __NR_getuid32		199
+#define __NR_getgid32		200
+#define __NR_geteuid32		201
+#define __NR_getegid32		202
+#define __NR_setreuid32		203
+#define __NR_setregid32		204
+#define __NR_getgroups32	205
+#define __NR_setgroups32	206
+#define __NR_fchown32		207
+#define __NR_setresuid32	208
+#define __NR_getresuid32	209
+#define __NR_setresgid32	210
+#define __NR_getresgid32	211
+#define __NR_chown32		212
+#define __NR_setuid32		213
+#define __NR_setgid32		214
+#define __NR_setfsuid32		215
+#define __NR_setfsgid32		216
+#define __NR_fcntl64		221
+#define __NR_sendfile64		223
+#define __NR_fadvise64_64	264
+#define __NR_fstatat64		293
+
+#else
+
+#define __NR_select		142
+#define __NR_getrlimit		191	/* SuS compliant getrlimit */
+#define __NR_lchown  		198
+#define __NR_getuid  		199
+#define __NR_getgid  		200
+#define __NR_geteuid  		201
+#define __NR_getegid  		202
+#define __NR_setreuid  		203
+#define __NR_setregid  		204
+#define __NR_getgroups  	205
+#define __NR_setgroups  	206
+#define __NR_fchown  		207
+#define __NR_setresuid  	208
+#define __NR_getresuid  	209
+#define __NR_setresgid  	210
+#define __NR_getresgid  	211
+#define __NR_chown  		212
+#define __NR_setuid  		213
+#define __NR_setgid  		214
+#define __NR_setfsuid  		215
+#define __NR_setfsgid  		216
+#define __NR_newfstatat		293
+
+#endif
+
+#ifdef __KERNEL__
+
+#ifndef CONFIG_64BIT
+#define __IGNORE_select
+#else
+#define __IGNORE_time
+#endif
+
+/* Ignore NUMA system calls. Not wired up on s390. */
+#define __IGNORE_mbind
+#define __IGNORE_get_mempolicy
+#define __IGNORE_set_mempolicy
+#define __IGNORE_migrate_pages
+#define __IGNORE_move_pages
+
+#define __ARCH_WANT_IPC_PARSE_VERSION
+#define __ARCH_WANT_OLD_READDIR
+#define __ARCH_WANT_SYS_ALARM
+#define __ARCH_WANT_SYS_GETHOSTNAME
+#define __ARCH_WANT_SYS_PAUSE
+#define __ARCH_WANT_SYS_SIGNAL
+#define __ARCH_WANT_SYS_UTIME
+#define __ARCH_WANT_SYS_SOCKETCALL
+#define __ARCH_WANT_SYS_FADVISE64
+#define __ARCH_WANT_SYS_GETPGRP
+#define __ARCH_WANT_SYS_LLSEEK
+#define __ARCH_WANT_SYS_NICE
+#define __ARCH_WANT_SYS_OLD_GETRLIMIT
+#define __ARCH_WANT_SYS_OLDUMOUNT
+#define __ARCH_WANT_SYS_SIGPENDING
+#define __ARCH_WANT_SYS_SIGPROCMASK
+#define __ARCH_WANT_SYS_RT_SIGACTION
+#define __ARCH_WANT_SYS_RT_SIGSUSPEND
+# ifndef CONFIG_64BIT
+#   define __ARCH_WANT_STAT64
+#   define __ARCH_WANT_SYS_TIME
+# endif
+# ifdef CONFIG_COMPAT
+#   define __ARCH_WANT_COMPAT_SYS_TIME
+#   define __ARCH_WANT_COMPAT_SYS_RT_SIGSUSPEND
+# endif
+
+/*
+ * "Conditional" syscalls
+ *
+ * What we want is __attribute__((weak,alias("sys_ni_syscall"))),
+ * but it doesn't work on all toolchains, so we just do it by hand
+ */
+#define cond_syscall(x) asm(".weak\t" #x "\n\t.set\t" #x ",sys_ni_syscall")
+
+#endif /* __KERNEL__ */
+#endif /* _ASM_S390_UNISTD_H_ */
diff --git a/include/asm-s390/user.h b/arch/s390/include/asm/user.h
index 1b050e35fdc6..1b050e35fdc6 100644
--- a/include/asm-s390/user.h
+++ b/arch/s390/include/asm/user.h
diff --git a/include/asm-s390/vtoc.h b/arch/s390/include/asm/vtoc.h
index 3a5267d90d29..3a5267d90d29 100644
--- a/include/asm-s390/vtoc.h
+++ b/arch/s390/include/asm/vtoc.h
diff --git a/include/asm-s390/xor.h b/arch/s390/include/asm/xor.h
index c82eb12a5b18..c82eb12a5b18 100644
--- a/include/asm-s390/xor.h
+++ b/arch/s390/include/asm/xor.h
diff --git a/include/asm-s390/zcrypt.h b/arch/s390/include/asm/zcrypt.h
index 00d3bbd44117..00d3bbd44117 100644
--- a/include/asm-s390/zcrypt.h
+++ b/arch/s390/include/asm/zcrypt.h
diff --git a/arch/s390/kernel/compat_wrapper.S b/arch/s390/kernel/compat_wrapper.S
index d003a6e16afb..328a20e880b5 100644
--- a/arch/s390/kernel/compat_wrapper.S
+++ b/arch/s390/kernel/compat_wrapper.S
@@ -1732,3 +1732,40 @@ compat_sys_timerfd_gettime_wrapper:
 	lgfr	%r2,%r2			# int
 	llgtr	%r3,%r3			# struct compat_itimerspec *
 	jg	compat_sys_timerfd_gettime
+
+	.globl compat_sys_signalfd4_wrapper
+compat_sys_signalfd4_wrapper:
+	lgfr	%r2,%r2			# int
+	llgtr	%r3,%r3			# compat_sigset_t *
+	llgfr	%r4,%r4			# compat_size_t
+	lgfr	%r5,%r5			# int
+	jg	compat_sys_signalfd4
+
+	.globl sys_eventfd2_wrapper
+sys_eventfd2_wrapper:
+	llgfr	%r2,%r2			# unsigned int
+	lgfr	%r3,%r3			# int
+	jg	sys_eventfd2
+
+	.globl	sys_inotify_init1_wrapper
+sys_inotify_init1_wrapper:
+	lgfr	%r2,%r2			# int
+	jg	sys_inotify_init1
+
+	.globl	sys_pipe2_wrapper
+sys_pipe2_wrapper:
+	llgtr	%r2,%r2			# u32 *
+	lgfr	%r3,%r3			# int
+	jg	sys_pipe2		# branch to system call
+
+	.globl	sys_dup3_wrapper
+sys_dup3_wrapper:
+	llgfr	%r2,%r2			# unsigned int
+	llgfr	%r3,%r3			# unsigned int
+	lgfr	%r4,%r4			# int
+	jg	sys_dup3		# branch to system call
+
+	.globl	sys_epoll_create1_wrapper
+sys_epoll_create1_wrapper:
+	lgfr	%r2,%r2			# int
+	jg	sys_epoll_create1	# branch to system call
diff --git a/arch/s390/kernel/ipl.c b/arch/s390/kernel/ipl.c
index 54b2779b5e2f..2dcf590faba6 100644
--- a/arch/s390/kernel/ipl.c
+++ b/arch/s390/kernel/ipl.c
@@ -1705,7 +1705,10 @@ void __init setup_ipl(void)
 
 void __init ipl_update_parameters(void)
 {
-	if (diag308(DIAG308_STORE, &ipl_block) == DIAG308_RC_OK)
+	int rc;
+
+	rc = diag308(DIAG308_STORE, &ipl_block);
+	if ((rc == DIAG308_RC_OK) || (rc == DIAG308_RC_NOCONFIG))
 		diag308_set_works = 1;
 }
 
diff --git a/arch/s390/kernel/kprobes.c b/arch/s390/kernel/kprobes.c
index 288ad490a6dd..569079ec4ff0 100644
--- a/arch/s390/kernel/kprobes.c
+++ b/arch/s390/kernel/kprobes.c
@@ -197,7 +197,7 @@ void __kprobes arch_arm_kprobe(struct kprobe *p)
 	args.new = BREAKPOINT_INSTRUCTION;
 
 	kcb->kprobe_status = KPROBE_SWAP_INST;
-	stop_machine_run(swap_instruction, &args, NR_CPUS);
+	stop_machine(swap_instruction, &args, NULL);
 	kcb->kprobe_status = status;
 }
 
@@ -212,7 +212,7 @@ void __kprobes arch_disarm_kprobe(struct kprobe *p)
 	args.new = p->opcode;
 
 	kcb->kprobe_status = KPROBE_SWAP_INST;
-	stop_machine_run(swap_instruction, &args, NR_CPUS);
+	stop_machine(swap_instruction, &args, NULL);
 	kcb->kprobe_status = status;
 }
 
@@ -270,7 +270,6 @@ static void __kprobes set_current_kprobe(struct kprobe *p, struct pt_regs *regs,
 	__ctl_store(kcb->kprobe_saved_ctl, 9, 11);
 }
 
-/* Called with kretprobe_lock held */
 void __kprobes arch_prepare_kretprobe(struct kretprobe_instance *ri,
 					struct pt_regs *regs)
 {
@@ -332,7 +331,7 @@ static int __kprobes kprobe_handler(struct pt_regs *regs)
 		 * No kprobe at this address. The fault has not been
 		 * caused by a kprobe breakpoint. The race of breakpoint
 		 * vs. kprobe remove does not exist because on s390 we
-		 * use stop_machine_run to arm/disarm the breakpoints.
+		 * use stop_machine to arm/disarm the breakpoints.
 		 */
 		goto no_kprobe;
 
@@ -377,8 +376,7 @@ static int __kprobes trampoline_probe_handler(struct kprobe *p,
 	unsigned long trampoline_address = (unsigned long)&kretprobe_trampoline;
 
 	INIT_HLIST_HEAD(&empty_rp);
-	spin_lock_irqsave(&kretprobe_lock, flags);
-	head = kretprobe_inst_table_head(current);
+	kretprobe_hash_lock(current, &head, &flags);
 
 	/*
 	 * It is possible to have multiple instances associated with a given
@@ -417,7 +415,7 @@ static int __kprobes trampoline_probe_handler(struct kprobe *p,
 	regs->psw.addr = orig_ret_address | PSW_ADDR_AMODE;
 
 	reset_current_kprobe();
-	spin_unlock_irqrestore(&kretprobe_lock, flags);
+	kretprobe_hash_unlock(current, &flags);
 	preempt_enable_no_resched();
 
 	hlist_for_each_entry_safe(ri, node, tmp, &empty_rp, hlist) {
diff --git a/arch/s390/kernel/mem_detect.c b/arch/s390/kernel/mem_detect.c
index 18ed7abe16c5..9872999c66d1 100644
--- a/arch/s390/kernel/mem_detect.c
+++ b/arch/s390/kernel/mem_detect.c
@@ -9,27 +9,6 @@
 #include <asm/sclp.h>
 #include <asm/setup.h>
 
-static int memory_fast_detect(struct mem_chunk *chunk)
-{
-	unsigned long val0 = 0;
-	unsigned long val1 = 0xc;
-	int rc = -EOPNOTSUPP;
-
-	if (ipl_flags & IPL_NSS_VALID)
-		return -EOPNOTSUPP;
-	asm volatile(
-		"	diag	%1,%2,0x260\n"
-		"0:	lhi	%0,0\n"
-		"1:\n"
-		EX_TABLE(0b,1b)
-		: "+d" (rc), "+d" (val0), "+d" (val1) : : "cc");
-
-	if (rc || val0 != val1)
-		return -EOPNOTSUPP;
-	chunk->size = val0 + 1;
-	return 0;
-}
-
 static inline int tprot(unsigned long addr)
 {
 	int rc = -EFAULT;
@@ -84,8 +63,6 @@ void detect_memory_layout(struct mem_chunk chunk[])
 	unsigned long flags, cr0;
 
 	memset(chunk, 0, MEMORY_CHUNKS * sizeof(struct mem_chunk));
-	if (memory_fast_detect(&chunk[0]) == 0)
-		return;
 	/* Disable IRQs, DAT and low address protection so tprot does the
 	 * right thing and we don't get scheduled away with low address
 	 * protection disabled.
diff --git a/arch/s390/kernel/process.c b/arch/s390/kernel/process.c
index 9839767d0842..3e2c05cb6a87 100644
--- a/arch/s390/kernel/process.c
+++ b/arch/s390/kernel/process.c
@@ -75,7 +75,9 @@ unsigned long thread_saved_pc(struct task_struct *tsk)
 	return sf->gprs[8];
 }
 
-DEFINE_PER_CPU(struct s390_idle_data, s390_idle);
+DEFINE_PER_CPU(struct s390_idle_data, s390_idle) = {
+	.lock = __SPIN_LOCK_UNLOCKED(s390_idle.lock)
+};
 
 static int s390_idle_enter(void)
 {
diff --git a/arch/s390/kernel/setup.c b/arch/s390/kernel/setup.c
index b358e18273b0..62122bad1e33 100644
--- a/arch/s390/kernel/setup.c
+++ b/arch/s390/kernel/setup.c
@@ -54,6 +54,7 @@
 #include <asm/sections.h>
 #include <asm/ebcdic.h>
 #include <asm/compat.h>
+#include <asm/kvm_virtio.h>
 
 long psw_kernel_bits	= (PSW_BASE_BITS | PSW_MASK_DAT | PSW_ASC_PRIMARY |
 			   PSW_MASK_MCHECK | PSW_DEFAULT_KEY);
@@ -766,7 +767,8 @@ setup_arch(char **cmdline_p)
 		printk("We are running under VM (64 bit mode)\n");
 	else if (MACHINE_IS_KVM) {
 		printk("We are running under KVM (64 bit mode)\n");
-		add_preferred_console("ttyS", 1, NULL);
+		add_preferred_console("hvc", 0, NULL);
+		s390_virtio_console_init();
 	} else
 		printk("We are running native (64 bit mode)\n");
 #endif /* CONFIG_64BIT */
diff --git a/arch/s390/kernel/smp.c b/arch/s390/kernel/smp.c
index b795b3e24afd..00b9b4dec5eb 100644
--- a/arch/s390/kernel/smp.c
+++ b/arch/s390/kernel/smp.c
@@ -610,7 +610,6 @@ static void __init smp_create_idle(unsigned int cpu)
 	if (IS_ERR(p))
 		panic("failed fork for CPU %u: %li", cpu, PTR_ERR(p));
 	current_set[cpu] = p;
-	spin_lock_init(&(&per_cpu(s390_idle, cpu))->lock);
 }
 
 static int __cpuinit smp_alloc_lowcore(int cpu)
@@ -845,7 +844,6 @@ void __init smp_prepare_boot_cpu(void)
 	current_set[0] = current;
 	smp_cpu_state[0] = CPU_STATE_CONFIGURED;
 	smp_cpu_polarization[0] = POLARIZATION_UNKNWN;
-	spin_lock_init(&(&__get_cpu_var(s390_idle))->lock);
 }
 
 void __init smp_cpus_done(unsigned int max_cpus)
diff --git a/arch/s390/kernel/syscalls.S b/arch/s390/kernel/syscalls.S
index c87ec687d4c6..c66d35e55142 100644
--- a/arch/s390/kernel/syscalls.S
+++ b/arch/s390/kernel/syscalls.S
@@ -330,3 +330,9 @@ SYSCALL(sys_eventfd,sys_eventfd,sys_eventfd_wrapper)
 SYSCALL(sys_timerfd_create,sys_timerfd_create,sys_timerfd_create_wrapper)
 SYSCALL(sys_timerfd_settime,sys_timerfd_settime,compat_sys_timerfd_settime_wrapper) /* 320 */
 SYSCALL(sys_timerfd_gettime,sys_timerfd_gettime,compat_sys_timerfd_gettime_wrapper)
+SYSCALL(sys_signalfd4,sys_signalfd4,compat_sys_signalfd4_wrapper)
+SYSCALL(sys_eventfd2,sys_eventfd2,sys_eventfd2_wrapper)
+SYSCALL(sys_inotify_init1,sys_inotify_init1,sys_inotify_init1_wrapper)
+SYSCALL(sys_pipe2,sys_pipe2,sys_pipe2_wrapper) /* 325 */
+SYSCALL(sys_dup3,sys_dup3,sys_dup3_wrapper)
+SYSCALL(sys_epoll_create1,sys_epoll_create1,sys_epoll_create1_wrapper)
diff --git a/arch/s390/kernel/time.c b/arch/s390/kernel/time.c
index ab70d9bd9261..ca114fe46ffb 100644
--- a/arch/s390/kernel/time.c
+++ b/arch/s390/kernel/time.c
@@ -1348,7 +1348,7 @@ early_param("stp", early_parse_stp);
 /*
  * Reset STP attachment.
  */
-static void stp_reset(void)
+static void __init stp_reset(void)
 {
 	int rc;
 
diff --git a/arch/s390/kernel/topology.c b/arch/s390/kernel/topology.c
index 212d618b0095..632b13e10053 100644
--- a/arch/s390/kernel/topology.c
+++ b/arch/s390/kernel/topology.c
@@ -9,7 +9,6 @@
 #include <linux/device.h>
 #include <linux/bootmem.h>
 #include <linux/sched.h>
-#include <linux/kthread.h>
 #include <linux/workqueue.h>
 #include <linux/cpu.h>
 #include <linux/smp.h>
@@ -230,20 +229,9 @@ void arch_update_cpu_topology(void)
 	}
 }
 
-static int topology_kthread(void *data)
-{
-	arch_reinit_sched_domains();
-	return 0;
-}
-
 static void topology_work_fn(struct work_struct *work)
 {
-	/* We can't call arch_reinit_sched_domains() from a multi-threaded
-	 * workqueue context since it may deadlock in case of cpu hotplug.
-	 * So we have to create a kernel thread in order to call
-	 * arch_reinit_sched_domains().
-	 */
-	kthread_run(topology_kthread, NULL, "topology_update");
+	arch_reinit_sched_domains();
 }
 
 void topology_schedule_update(void)
diff --git a/arch/s390/kernel/vmlinux.lds.S b/arch/s390/kernel/vmlinux.lds.S
index 76c1e60c92f3..607bd67a18ce 100644
--- a/arch/s390/kernel/vmlinux.lds.S
+++ b/arch/s390/kernel/vmlinux.lds.S
@@ -55,7 +55,7 @@ SECTIONS
 		__start___ex_table = .;
 		*(__ex_table)
 		__stop___ex_table = .;
-	}
+	} :data
 
 	.data : {		/* Data */
 		DATA_DATA
diff --git a/arch/s390/kvm/gaccess.h b/arch/s390/kvm/gaccess.h
index 4e0633c413f3..ed60f3a74a85 100644
--- a/arch/s390/kvm/gaccess.h
+++ b/arch/s390/kvm/gaccess.h
@@ -18,11 +18,11 @@
 #include <asm/uaccess.h>
 
 static inline void __user *__guestaddr_to_user(struct kvm_vcpu *vcpu,
-					       u64 guestaddr)
+					       unsigned long guestaddr)
 {
-	u64 prefix  = vcpu->arch.sie_block->prefix;
-	u64 origin  = vcpu->kvm->arch.guest_origin;
-	u64 memsize = vcpu->kvm->arch.guest_memsize;
+	unsigned long prefix  = vcpu->arch.sie_block->prefix;
+	unsigned long origin  = vcpu->kvm->arch.guest_origin;
+	unsigned long memsize = vcpu->kvm->arch.guest_memsize;
 
 	if (guestaddr < 2 * PAGE_SIZE)
 		guestaddr += prefix;
@@ -37,7 +37,7 @@ static inline void __user *__guestaddr_to_user(struct kvm_vcpu *vcpu,
 	return (void __user *) guestaddr;
 }
 
-static inline int get_guest_u64(struct kvm_vcpu *vcpu, u64 guestaddr,
+static inline int get_guest_u64(struct kvm_vcpu *vcpu, unsigned long guestaddr,
 				u64 *result)
 {
 	void __user *uptr = __guestaddr_to_user(vcpu, guestaddr);
@@ -47,10 +47,10 @@ static inline int get_guest_u64(struct kvm_vcpu *vcpu, u64 guestaddr,
 	if (IS_ERR((void __force *) uptr))
 		return PTR_ERR((void __force *) uptr);
 
-	return get_user(*result, (u64 __user *) uptr);
+	return get_user(*result, (unsigned long __user *) uptr);
 }
 
-static inline int get_guest_u32(struct kvm_vcpu *vcpu, u64 guestaddr,
+static inline int get_guest_u32(struct kvm_vcpu *vcpu, unsigned long guestaddr,
 				u32 *result)
 {
 	void __user *uptr = __guestaddr_to_user(vcpu, guestaddr);
@@ -63,7 +63,7 @@ static inline int get_guest_u32(struct kvm_vcpu *vcpu, u64 guestaddr,
 	return get_user(*result, (u32 __user *) uptr);
 }
 
-static inline int get_guest_u16(struct kvm_vcpu *vcpu, u64 guestaddr,
+static inline int get_guest_u16(struct kvm_vcpu *vcpu, unsigned long guestaddr,
 				u16 *result)
 {
 	void __user *uptr = __guestaddr_to_user(vcpu, guestaddr);
@@ -76,7 +76,7 @@ static inline int get_guest_u16(struct kvm_vcpu *vcpu, u64 guestaddr,
 	return get_user(*result, (u16 __user *) uptr);
 }
 
-static inline int get_guest_u8(struct kvm_vcpu *vcpu, u64 guestaddr,
+static inline int get_guest_u8(struct kvm_vcpu *vcpu, unsigned long guestaddr,
 			       u8 *result)
 {
 	void __user *uptr = __guestaddr_to_user(vcpu, guestaddr);
@@ -87,7 +87,7 @@ static inline int get_guest_u8(struct kvm_vcpu *vcpu, u64 guestaddr,
 	return get_user(*result, (u8 __user *) uptr);
 }
 
-static inline int put_guest_u64(struct kvm_vcpu *vcpu, u64 guestaddr,
+static inline int put_guest_u64(struct kvm_vcpu *vcpu, unsigned long guestaddr,
 				u64 value)
 {
 	void __user *uptr = __guestaddr_to_user(vcpu, guestaddr);
@@ -100,7 +100,7 @@ static inline int put_guest_u64(struct kvm_vcpu *vcpu, u64 guestaddr,
 	return put_user(value, (u64 __user *) uptr);
 }
 
-static inline int put_guest_u32(struct kvm_vcpu *vcpu, u64 guestaddr,
+static inline int put_guest_u32(struct kvm_vcpu *vcpu, unsigned long guestaddr,
 				u32 value)
 {
 	void __user *uptr = __guestaddr_to_user(vcpu, guestaddr);
@@ -113,7 +113,7 @@ static inline int put_guest_u32(struct kvm_vcpu *vcpu, u64 guestaddr,
 	return put_user(value, (u32 __user *) uptr);
 }
 
-static inline int put_guest_u16(struct kvm_vcpu *vcpu, u64 guestaddr,
+static inline int put_guest_u16(struct kvm_vcpu *vcpu, unsigned long guestaddr,
 				u16 value)
 {
 	void __user *uptr = __guestaddr_to_user(vcpu, guestaddr);
@@ -126,7 +126,7 @@ static inline int put_guest_u16(struct kvm_vcpu *vcpu, u64 guestaddr,
 	return put_user(value, (u16 __user *) uptr);
 }
 
-static inline int put_guest_u8(struct kvm_vcpu *vcpu, u64 guestaddr,
+static inline int put_guest_u8(struct kvm_vcpu *vcpu, unsigned long guestaddr,
 			       u8 value)
 {
 	void __user *uptr = __guestaddr_to_user(vcpu, guestaddr);
@@ -138,7 +138,8 @@ static inline int put_guest_u8(struct kvm_vcpu *vcpu, u64 guestaddr,
 }
 
 
-static inline int __copy_to_guest_slow(struct kvm_vcpu *vcpu, u64 guestdest,
+static inline int __copy_to_guest_slow(struct kvm_vcpu *vcpu,
+				       unsigned long guestdest,
 				       const void *from, unsigned long n)
 {
 	int rc;
@@ -153,12 +154,12 @@ static inline int __copy_to_guest_slow(struct kvm_vcpu *vcpu, u64 guestdest,
 	return 0;
 }
 
-static inline int copy_to_guest(struct kvm_vcpu *vcpu, u64 guestdest,
+static inline int copy_to_guest(struct kvm_vcpu *vcpu, unsigned long guestdest,
 				const void *from, unsigned long n)
 {
-	u64 prefix  = vcpu->arch.sie_block->prefix;
-	u64 origin  = vcpu->kvm->arch.guest_origin;
-	u64 memsize = vcpu->kvm->arch.guest_memsize;
+	unsigned long prefix  = vcpu->arch.sie_block->prefix;
+	unsigned long origin  = vcpu->kvm->arch.guest_origin;
+	unsigned long memsize = vcpu->kvm->arch.guest_memsize;
 
 	if ((guestdest < 2 * PAGE_SIZE) && (guestdest + n > 2 * PAGE_SIZE))
 		goto slowpath;
@@ -189,7 +190,8 @@ slowpath:
 }
 
 static inline int __copy_from_guest_slow(struct kvm_vcpu *vcpu, void *to,
-					 u64 guestsrc, unsigned long n)
+					 unsigned long guestsrc,
+					 unsigned long n)
 {
 	int rc;
 	unsigned long i;
@@ -204,11 +206,11 @@ static inline int __copy_from_guest_slow(struct kvm_vcpu *vcpu, void *to,
 }
 
 static inline int copy_from_guest(struct kvm_vcpu *vcpu, void *to,
-				  u64 guestsrc, unsigned long n)
+				  unsigned long guestsrc, unsigned long n)
 {
-	u64 prefix  = vcpu->arch.sie_block->prefix;
-	u64 origin  = vcpu->kvm->arch.guest_origin;
-	u64 memsize = vcpu->kvm->arch.guest_memsize;
+	unsigned long prefix  = vcpu->arch.sie_block->prefix;
+	unsigned long origin  = vcpu->kvm->arch.guest_origin;
+	unsigned long memsize = vcpu->kvm->arch.guest_memsize;
 
 	if ((guestsrc < 2 * PAGE_SIZE) && (guestsrc + n > 2 * PAGE_SIZE))
 		goto slowpath;
@@ -238,11 +240,12 @@ slowpath:
 	return __copy_from_guest_slow(vcpu, to, guestsrc, n);
 }
 
-static inline int copy_to_guest_absolute(struct kvm_vcpu *vcpu, u64 guestdest,
+static inline int copy_to_guest_absolute(struct kvm_vcpu *vcpu,
+					 unsigned long guestdest,
 					 const void *from, unsigned long n)
 {
-	u64 origin  = vcpu->kvm->arch.guest_origin;
-	u64 memsize = vcpu->kvm->arch.guest_memsize;
+	unsigned long origin  = vcpu->kvm->arch.guest_origin;
+	unsigned long memsize = vcpu->kvm->arch.guest_memsize;
 
 	if (guestdest + n > memsize)
 		return -EFAULT;
@@ -256,10 +259,11 @@ static inline int copy_to_guest_absolute(struct kvm_vcpu *vcpu, u64 guestdest,
 }
 
 static inline int copy_from_guest_absolute(struct kvm_vcpu *vcpu, void *to,
-					   u64 guestsrc, unsigned long n)
+					   unsigned long guestsrc,
+					   unsigned long n)
 {
-	u64 origin  = vcpu->kvm->arch.guest_origin;
-	u64 memsize = vcpu->kvm->arch.guest_memsize;
+	unsigned long origin  = vcpu->kvm->arch.guest_origin;
+	unsigned long memsize = vcpu->kvm->arch.guest_memsize;
 
 	if (guestsrc + n > memsize)
 		return -EFAULT;
diff --git a/arch/s390/kvm/intercept.c b/arch/s390/kvm/intercept.c
index 47a0b642174c..61236102203e 100644
--- a/arch/s390/kvm/intercept.c
+++ b/arch/s390/kvm/intercept.c
@@ -20,7 +20,7 @@
 #include "kvm-s390.h"
 #include "gaccess.h"
 
-static int handle_lctg(struct kvm_vcpu *vcpu)
+static int handle_lctlg(struct kvm_vcpu *vcpu)
 {
 	int reg1 = (vcpu->arch.sie_block->ipa & 0x00f0) >> 4;
 	int reg3 = vcpu->arch.sie_block->ipa & 0x000f;
@@ -30,7 +30,7 @@ static int handle_lctg(struct kvm_vcpu *vcpu)
 	u64 useraddr;
 	int reg, rc;
 
-	vcpu->stat.instruction_lctg++;
+	vcpu->stat.instruction_lctlg++;
 	if ((vcpu->arch.sie_block->ipb & 0xff) != 0x2f)
 		return -ENOTSUPP;
 
@@ -38,9 +38,12 @@ static int handle_lctg(struct kvm_vcpu *vcpu)
 	if (base2)
 		useraddr += vcpu->arch.guest_gprs[base2];
 
+	if (useraddr & 7)
+		return kvm_s390_inject_program_int(vcpu, PGM_SPECIFICATION);
+
 	reg = reg1;
 
-	VCPU_EVENT(vcpu, 5, "lctg r1:%x, r3:%x,b2:%x,d2:%x", reg1, reg3, base2,
+	VCPU_EVENT(vcpu, 5, "lctlg r1:%x, r3:%x,b2:%x,d2:%x", reg1, reg3, base2,
 		   disp2);
 
 	do {
@@ -74,6 +77,9 @@ static int handle_lctl(struct kvm_vcpu *vcpu)
 	if (base2)
 		useraddr += vcpu->arch.guest_gprs[base2];
 
+	if (useraddr & 3)
+		return kvm_s390_inject_program_int(vcpu, PGM_SPECIFICATION);
+
 	VCPU_EVENT(vcpu, 5, "lctl r1:%x, r3:%x,b2:%x,d2:%x", reg1, reg3, base2,
 		   disp2);
 
@@ -99,7 +105,7 @@ static intercept_handler_t instruction_handlers[256] = {
 	[0xae] = kvm_s390_handle_sigp,
 	[0xb2] = kvm_s390_handle_priv,
 	[0xb7] = handle_lctl,
-	[0xeb] = handle_lctg,
+	[0xeb] = handle_lctlg,
 };
 
 static int handle_noop(struct kvm_vcpu *vcpu)
diff --git a/arch/s390/kvm/interrupt.c b/arch/s390/kvm/interrupt.c
index 11230b0db957..2960702b4824 100644
--- a/arch/s390/kvm/interrupt.c
+++ b/arch/s390/kvm/interrupt.c
@@ -13,6 +13,7 @@
 #include <asm/lowcore.h>
 #include <asm/uaccess.h>
 #include <linux/kvm_host.h>
+#include <linux/signal.h>
 #include "kvm-s390.h"
 #include "gaccess.h"
 
@@ -246,15 +247,10 @@ static void __do_deliver_interrupt(struct kvm_vcpu *vcpu,
 	default:
 		BUG();
 	}
-
 	if (exception) {
-		VCPU_EVENT(vcpu, 1, "%s", "program exception while delivering"
-			   " interrupt");
-		kvm_s390_inject_program_int(vcpu, PGM_ADDRESSING);
-		if (inti->type == KVM_S390_PROGRAM_INT) {
-			printk(KERN_WARNING "kvm: recursive program check\n");
-			BUG();
-		}
+		printk("kvm: The guest lowcore is not mapped during interrupt "
+			"delivery, killing userspace\n");
+		do_exit(SIGKILL);
 	}
 }
 
@@ -277,14 +273,11 @@ static int __try_deliver_ckc_interrupt(struct kvm_vcpu *vcpu)
 		__LC_EXT_NEW_PSW, sizeof(psw_t));
 	if (rc == -EFAULT)
 		exception = 1;
-
 	if (exception) {
-		VCPU_EVENT(vcpu, 1, "%s", "program exception while delivering" \
-			   " ckc interrupt");
-		kvm_s390_inject_program_int(vcpu, PGM_ADDRESSING);
-		return 0;
+		printk("kvm: The guest lowcore is not mapped during interrupt "
+			"delivery, killing userspace\n");
+		do_exit(SIGKILL);
 	}
-
 	return 1;
 }
 
diff --git a/arch/s390/kvm/kvm-s390.c b/arch/s390/kvm/kvm-s390.c
index 1782cbcd2829..8b00eb2ddf57 100644
--- a/arch/s390/kvm/kvm-s390.c
+++ b/arch/s390/kvm/kvm-s390.c
@@ -39,7 +39,7 @@ struct kvm_stats_debugfs_item debugfs_entries[] = {
 	{ "exit_instruction", VCPU_STAT(exit_instruction) },
 	{ "exit_program_interruption", VCPU_STAT(exit_program_interruption) },
 	{ "exit_instr_and_program_int", VCPU_STAT(exit_instr_and_program) },
-	{ "instruction_lctg", VCPU_STAT(instruction_lctg) },
+	{ "instruction_lctlg", VCPU_STAT(instruction_lctlg) },
 	{ "instruction_lctl", VCPU_STAT(instruction_lctl) },
 	{ "deliver_emergency_signal", VCPU_STAT(deliver_emergency_signal) },
 	{ "deliver_service_signal", VCPU_STAT(deliver_service_signal) },
@@ -112,7 +112,12 @@ long kvm_arch_dev_ioctl(struct file *filp,
 
 int kvm_dev_ioctl_check_extension(long ext)
 {
-	return 0;
+	switch (ext) {
+	case KVM_CAP_USER_MEMORY:
+		return 1;
+	default:
+		return 0;
+	}
 }
 
 /* Section: vm related */
diff --git a/arch/s390/kvm/priv.c b/arch/s390/kvm/priv.c
index 2e2d2ffb6a07..d1faf5c54405 100644
--- a/arch/s390/kvm/priv.c
+++ b/arch/s390/kvm/priv.c
@@ -158,6 +158,7 @@ static int handle_stfl(struct kvm_vcpu *vcpu)
 
 	vcpu->stat.instruction_stfl++;
 	facility_list &= ~(1UL<<24); /* no stfle */
+	facility_list &= ~(1UL<<23); /* no large pages */
 
 	rc = copy_to_guest(vcpu, offsetof(struct _lowcore, stfl_fac_list),
 			   &facility_list, sizeof(facility_list));
diff --git a/arch/s390/kvm/sigp.c b/arch/s390/kvm/sigp.c
index 5a556114eaa5..170392687ce0 100644
--- a/arch/s390/kvm/sigp.c
+++ b/arch/s390/kvm/sigp.c
@@ -43,7 +43,8 @@
 #define SIGP_STAT_RECEIVER_CHECK    0x00000001UL
 
 
-static int __sigp_sense(struct kvm_vcpu *vcpu, u16 cpu_addr, u64 *reg)
+static int __sigp_sense(struct kvm_vcpu *vcpu, u16 cpu_addr,
+			unsigned long *reg)
 {
 	struct kvm_s390_float_interrupt *fi = &vcpu->kvm->arch.float_int;
 	int rc;
@@ -167,7 +168,7 @@ static int __sigp_set_arch(struct kvm_vcpu *vcpu, u32 parameter)
 }
 
 static int __sigp_set_prefix(struct kvm_vcpu *vcpu, u16 cpu_addr, u32 address,
-			     u64 *reg)
+			     unsigned long *reg)
 {
 	struct kvm_s390_float_interrupt *fi = &vcpu->kvm->arch.float_int;
 	struct kvm_s390_local_interrupt *li;
diff --git a/arch/s390/lib/delay.c b/arch/s390/lib/delay.c
index eae21a8ac72d..fc6ab6094df8 100644
--- a/arch/s390/lib/delay.c
+++ b/arch/s390/lib/delay.c
@@ -43,7 +43,7 @@ void __udelay(unsigned long usecs)
 		local_bh_disable();
 	local_irq_save(flags);
 	if (raw_irqs_disabled_flags(flags)) {
-		old_cc = S390_lowcore.clock_comparator;
+		old_cc = local_tick_disable();
 		S390_lowcore.clock_comparator = -1ULL;
 		__ctl_store(cr0, 0, 0);
 		dummy = (cr0 & 0xffff00e0) | 0x00000800;
@@ -65,7 +65,7 @@ void __udelay(unsigned long usecs)
 
 	if (raw_irqs_disabled_flags(flags)) {
 		__ctl_load(cr0, 0, 0);
-		S390_lowcore.clock_comparator = old_cc;
+		local_tick_enable(old_cc);
 	}
 	if (!irq_context)
 		_local_bh_enable();
diff --git a/arch/s390/mm/init.c b/arch/s390/mm/init.c
index 388cc7420055..1169130a97ef 100644
--- a/arch/s390/mm/init.c
+++ b/arch/s390/mm/init.c
@@ -42,38 +42,6 @@ DEFINE_PER_CPU(struct mmu_gather, mmu_gathers);
 pgd_t swapper_pg_dir[PTRS_PER_PGD] __attribute__((__aligned__(PAGE_SIZE)));
 char  empty_zero_page[PAGE_SIZE] __attribute__((__aligned__(PAGE_SIZE)));
 
-void show_mem(void)
-{
-	unsigned long i, total = 0, reserved = 0;
-	unsigned long shared = 0, cached = 0;
-	unsigned long flags;
-	struct page *page;
-	pg_data_t *pgdat;
-
-	printk("Mem-info:\n");
-	show_free_areas();
-	for_each_online_pgdat(pgdat) {
-		pgdat_resize_lock(pgdat, &flags);
-		for (i = 0; i < pgdat->node_spanned_pages; i++) {
-			if (!pfn_valid(pgdat->node_start_pfn + i))
-				continue;
-			page = pfn_to_page(pgdat->node_start_pfn + i);
-			total++;
-			if (PageReserved(page))
-				reserved++;
-			else if (PageSwapCache(page))
-				cached++;
-			else if (page_count(page))
-				shared += page_count(page) - 1;
-		}
-		pgdat_resize_unlock(pgdat, &flags);
-	}
-	printk("%ld pages of RAM\n", total);
-	printk("%ld reserved pages\n", reserved);
-	printk("%ld pages shared\n", shared);
-	printk("%ld pages swap cached\n", cached);
-}
-
 /*
  * paging_init() sets up the page tables
  */
@@ -211,7 +179,7 @@ int arch_add_memory(int nid, u64 start, u64 size)
 	int rc;
 
 	pgdat = NODE_DATA(nid);
-	zone = pgdat->node_zones + ZONE_NORMAL;
+	zone = pgdat->node_zones + ZONE_MOVABLE;
 	rc = vmem_add_mapping(start, size);
 	if (rc)
 		return rc;
@@ -221,3 +189,14 @@ int arch_add_memory(int nid, u64 start, u64 size)
 	return rc;
 }
 #endif /* CONFIG_MEMORY_HOTPLUG */
+
+#ifdef CONFIG_MEMORY_HOTREMOVE
+int remove_memory(u64 start, u64 size)
+{
+	unsigned long start_pfn, end_pfn;
+
+	start_pfn = PFN_DOWN(start);
+	end_pfn = start_pfn + PFN_DOWN(size);
+	return offline_pages(start_pfn, end_pfn, 120 * HZ);
+}
+#endif /* CONFIG_MEMORY_HOTREMOVE */
diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig
index 8879938f3356..5131d50f851a 100644
--- a/arch/sh/Kconfig
+++ b/arch/sh/Kconfig
@@ -11,6 +11,7 @@ config SUPERH
 	select HAVE_CLK
 	select HAVE_IDE
 	select HAVE_OPROFILE
+	select HAVE_GENERIC_DMA_COHERENT
 	help
 	  The SuperH is a RISC processor targeted for use in embedded systems
 	  and consumer electronics; it was also used in the Sega Dreamcast
@@ -23,6 +24,11 @@ config SUPERH32
 config SUPERH64
 	def_bool y if CPU_SH5
 
+config ARCH_DEFCONFIG
+	string
+	default "arch/sh/configs/shx3_defconfig" if SUPERH32
+	default "arch/sh/configs/cayman_defconfig" if SUPERH64
+
 config RWSEM_GENERIC_SPINLOCK
 	def_bool y
 
@@ -42,6 +48,9 @@ config GENERIC_HWEIGHT
 config GENERIC_HARDIRQS
 	def_bool y
 
+config GENERIC_HARDIRQS_NO__DO_IRQ
+	def_bool y
+
 config GENERIC_IRQ_PROBE
 	def_bool y
 
@@ -57,6 +66,10 @@ config GENERIC_TIME
 config GENERIC_CLOCKEVENTS
 	def_bool n
 
+config GENERIC_LOCKBREAK
+	def_bool y
+	depends on SMP && PREEMPT
+
 config SYS_SUPPORTS_PM
 	bool
 
@@ -88,9 +101,6 @@ config ARCH_HAS_ILOG2_U64
 config ARCH_NO_VIRT_TO_BUS
 	def_bool y
 
-config ARCH_SUPPORTS_AOUT
-	def_bool y
-
 config IO_TRAPPED
 	bool
 
@@ -347,219 +357,10 @@ config CPU_SUBTYPE_SH5_103
 endchoice
 
 source "arch/sh/mm/Kconfig"
+ 
 source "arch/sh/Kconfig.cpu"
 
-menu "Board support"
-
-config SOLUTION_ENGINE
-	bool
-
-config SH_SOLUTION_ENGINE
-	bool "SolutionEngine"
-	select SOLUTION_ENGINE
-	select CPU_HAS_IPR_IRQ
-	depends on CPU_SUBTYPE_SH7705 || CPU_SUBTYPE_SH7709 || CPU_SUBTYPE_SH7710 || \
-	  CPU_SUBTYPE_SH7712 || CPU_SUBTYPE_SH7750 || CPU_SUBTYPE_SH7750S || \
-	  CPU_SUBTYPE_SH7750R 
-	help
-	  Select SolutionEngine if configuring for a Hitachi SH7705, SH7709,
-	  SH7710, SH7712, SH7750, SH7750S or SH7750R evaluation board.
-
-config SH_7206_SOLUTION_ENGINE
-	bool "SolutionEngine7206"
-	select SOLUTION_ENGINE
-	depends on CPU_SUBTYPE_SH7206
-	help
-	  Select 7206 SolutionEngine if configuring for a Hitachi SH7206
-	  evaluation board.
-
-config SH_7619_SOLUTION_ENGINE
-	bool "SolutionEngine7619"
-	select SOLUTION_ENGINE
-	depends on CPU_SUBTYPE_SH7619
-	help
-	  Select 7619 SolutionEngine if configuring for a Hitachi SH7619
-	  evaluation board.
-	
-config SH_7721_SOLUTION_ENGINE
-	bool "SolutionEngine7721"
-	select SOLUTION_ENGINE
-	depends on CPU_SUBTYPE_SH7721
-	help
-	  Select 7721 SolutionEngine if configuring for a Hitachi SH7721
-	  evaluation board.
-
-config SH_7722_SOLUTION_ENGINE
-	bool "SolutionEngine7722"
-	select SOLUTION_ENGINE
-	depends on CPU_SUBTYPE_SH7722
-	help
-	  Select 7722 SolutionEngine if configuring for a Hitachi SH772
-	  evaluation board.
-
-config SH_7751_SOLUTION_ENGINE
-	bool "SolutionEngine7751"
-	select SOLUTION_ENGINE
-	select CPU_HAS_IPR_IRQ
-	depends on CPU_SUBTYPE_SH7751
-	help
-	  Select 7751 SolutionEngine if configuring for a Hitachi SH7751
-	  evaluation board.
-	  
-config SH_7780_SOLUTION_ENGINE
-	bool "SolutionEngine7780"
-	select SOLUTION_ENGINE
-	select SYS_SUPPORTS_PCI
-	depends on CPU_SUBTYPE_SH7780
-	help
-	  Select 7780 SolutionEngine if configuring for a Renesas SH7780
-	  evaluation board.
-
-config SH_7343_SOLUTION_ENGINE
-	bool "SolutionEngine7343"
-	select SOLUTION_ENGINE
-	depends on CPU_SUBTYPE_SH7343
-	help
-	  Select 7343 SolutionEngine if configuring for a Hitachi
-	  SH7343 (SH-Mobile 3AS) evaluation board.
-
-config SH_7751_SYSTEMH
-	bool "SystemH7751R"
-	depends on CPU_SUBTYPE_SH7751R
-	help
-	  Select SystemH if you are configuring for a Renesas SystemH
-	  7751R evaluation board.
-
-config SH_HP6XX
-	bool "HP6XX"
-	select SYS_SUPPORTS_APM_EMULATION
-	select HD6446X_SERIES
-	depends on CPU_SUBTYPE_SH7709
-	help
-	  Select HP6XX if configuring for a HP jornada HP6xx.
-	  More information (hardware only) at
-	  <http://www.hp.com/jornada/>.
-
-config SH_DREAMCAST
-	bool "Dreamcast"
-	select SYS_SUPPORTS_PCI
-	depends on CPU_SUBTYPE_SH7091
-	help
-	  Select Dreamcast if configuring for a SEGA Dreamcast.
-	  More information at <http://www.linux-sh.org>
-
-config SH_SH03
-	bool "Interface CTP/PCI-SH03"
-	depends on CPU_SUBTYPE_SH7751
-	select CPU_HAS_IPR_IRQ
-	select SYS_SUPPORTS_PCI
-	help
-	  CTP/PCI-SH03 is a CPU module computer that is produced
-	  by Interface Corporation.
-	  More information at <http://www.interface.co.jp>
-
-config SH_SECUREEDGE5410
-	bool "SecureEdge5410"
-	depends on CPU_SUBTYPE_SH7751R
-	select CPU_HAS_IPR_IRQ
-	select SYS_SUPPORTS_PCI
-	help
-	  Select SecureEdge5410 if configuring for a SnapGear SH board.
-	  This includes both the OEM SecureEdge products as well as the
-	  SME product line.
-
-config SH_RTS7751R2D
-	bool "RTS7751R2D"
-	depends on CPU_SUBTYPE_SH7751R
-	select SYS_SUPPORTS_PCI
-	select IO_TRAPPED
-	help
-	  Select RTS7751R2D if configuring for a Renesas Technology
-	  Sales SH-Graphics board.
-
-config SH_SDK7780
-	bool "SDK7780R3"
-	depends on CPU_SUBTYPE_SH7780
-	select SYS_SUPPORTS_PCI
-	help
-	  Select SDK7780 if configuring for a Renesas SH7780 SDK7780R3
-	  evaluation board.
-
-config SH_HIGHLANDER
-	bool "Highlander"
-	depends on CPU_SUBTYPE_SH7780 || CPU_SUBTYPE_SH7785
-	select SYS_SUPPORTS_PCI
-	select IO_TRAPPED
-
-config SH_MIGOR
-	bool "Migo-R"
-	depends on CPU_SUBTYPE_SH7722
-	help
-	  Select Migo-R if configuring for the SH7722 Migo-R platform
-          by Renesas System Solutions Asia Pte. Ltd.
-
-config SH_EDOSK7705
-	bool "EDOSK7705"
-	depends on CPU_SUBTYPE_SH7705
-
-config SH_SH4202_MICRODEV
-	bool "SH4-202 MicroDev"
-	depends on CPU_SUBTYPE_SH4_202
-	help
-	  Select SH4-202 MicroDev if configuring for a SuperH MicroDev board
-	  with an SH4-202 CPU.
-
-config SH_LANDISK
-	bool "LANDISK"
-	depends on CPU_SUBTYPE_SH7751R
-	select SYS_SUPPORTS_PCI
-	help
-	  I-O DATA DEVICE, INC. "LANDISK Series" support.
-
-config SH_TITAN
-	bool "TITAN"
-	depends on CPU_SUBTYPE_SH7751R
-	select CPU_HAS_IPR_IRQ
-	select SYS_SUPPORTS_PCI
-	help
-	  Select Titan if you are configuring for a Nimble Microsystems
-	  NetEngine NP51R.
-
-config SH_SHMIN
-	bool "SHMIN"
-	depends on CPU_SUBTYPE_SH7706
-	select CPU_HAS_IPR_IRQ
-	help
-	  Select SHMIN if configuring for the SHMIN board.
-
-config SH_LBOX_RE2
-	bool "L-BOX RE2"
-	depends on CPU_SUBTYPE_SH7751R
-	select SYS_SUPPORTS_PCI
-	help
-	  Select L-BOX RE2 if configuring for the NTT COMWARE L-BOX RE2.
-
-config SH_X3PROTO
-	bool "SH-X3 Prototype board"
-	depends on CPU_SUBTYPE_SHX3
-
-config SH_MAGIC_PANEL_R2
-	bool "Magic Panel R2"
-	depends on CPU_SUBTYPE_SH7720
-	help
-	  Select Magic Panel R2 if configuring for Magic Panel R2.
-
-config SH_CAYMAN
-	bool "Hitachi Cayman"
-	depends on CPU_SUBTYPE_SH5_101 || CPU_SUBTYPE_SH5_103
-	select SYS_SUPPORTS_PCI
-
-endmenu
-
-source "arch/sh/boards/renesas/rts7751r2d/Kconfig"
-source "arch/sh/boards/renesas/r7780rp/Kconfig"
-source "arch/sh/boards/renesas/sdk7780/Kconfig"
-source "arch/sh/boards/magicpanelr2/Kconfig"
+source "arch/sh/boards/Kconfig"
 
 menu "Timer and clock configuration"
 
@@ -686,6 +487,23 @@ config CRASH_DUMP
 
 	  For more details see Documentation/kdump/kdump.txt
 
+config SECCOMP
+	bool "Enable seccomp to safely compute untrusted bytecode"
+	depends on PROC_FS
+	default y
+	help
+	  This kernel feature is useful for number crunching applications
+	  that may need to compute untrusted bytecode during their
+	  execution. By using pipes or other transports made available to
+	  the process as file descriptors supporting the read/write
+	  syscalls, it's possible to isolate those applications in
+	  their own address space using seccomp. Once seccomp is
+	  enabled via prctl, it cannot be disabled and the task is only
+	  allowed to execute a few safe syscalls defined by each seccomp
+	  mode.
+
+	  If unsure, say N.
+
 config SMP
 	bool "Symmetric multi-processing support"
 	depends on SYS_SUPPORTS_SMP
diff --git a/arch/sh/Kconfig.debug b/arch/sh/Kconfig.debug
index 0f4549860226..4d2d102e00d5 100644
--- a/arch/sh/Kconfig.debug
+++ b/arch/sh/Kconfig.debug
@@ -36,7 +36,8 @@ config EARLY_SCIF_CONSOLE_PORT
 	default "0xff804000" if CPU_SUBTYPE_MXG
 	default "0xffc30000" if CPU_SUBTYPE_SHX3
 	default "0xffe00000" if CPU_SUBTYPE_SH7780 || CPU_SUBTYPE_SH7763 || \
-				CPU_SUBTYPE_SH7722 || CPU_SUBTYPE_SH7366
+				CPU_SUBTYPE_SH7722 || CPU_SUBTYPE_SH7366 || \
+				CPU_SUBTYPE_SH7343
 	default "0xffe80000" if CPU_SH4
 	default "0xffea0000" if CPU_SUBTYPE_SH7785
 	default "0xfffe8000" if CPU_SUBTYPE_SH7203
@@ -181,7 +182,7 @@ if SUPERH64
 
 config SH64_PROC_ASIDS
 	bool "Debug: report ASIDs through /proc/asids"
-	depends on PROC_FS
+	depends on PROC_FS && MMU
 
 config SH64_SR_WATCH
 	bool "Debug: set SR.WATCH to enable hardware watchpoints and trace"
diff --git a/arch/sh/Makefile b/arch/sh/Makefile
index fb7b1b15e392..01d85c74481d 100644
--- a/arch/sh/Makefile
+++ b/arch/sh/Makefile
@@ -68,7 +68,7 @@ OBJCOPYFLAGS	:= -O binary -R .note -R .note.gnu.build-id -R .comment \
 defaultimage-$(CONFIG_SUPERH32)	:= zImage
 
 # Set some sensible Kbuild defaults
-KBUILD_DEFCONFIG	:= r7780mp_defconfig
+KBUILD_DEFCONFIG	:= shx3_defconfig
 KBUILD_IMAGE		:= $(defaultimage-y)
 
 #
@@ -91,47 +91,32 @@ LDFLAGS_vmlinux		+= --defsym 'jiffies=jiffies_64+4'
 LDFLAGS			+= -EB
 endif
 
-KBUILD_CFLAGS		+= -pipe $(cflags-y)
-KBUILD_AFLAGS		+= $(cflags-y)
-
 head-y			:= arch/sh/kernel/init_task.o
 head-$(CONFIG_SUPERH32)	+= arch/sh/kernel/head_32.o
 head-$(CONFIG_SUPERH64)	+= arch/sh/kernel/head_64.o
 
-LIBGCC := $(shell $(CC) $(KBUILD_CFLAGS) -print-libgcc-file-name)
-
-core-y				+= arch/sh/kernel/ arch/sh/mm/
+core-y				+= arch/sh/kernel/ arch/sh/mm/ arch/sh/boards/
 core-$(CONFIG_SH_FPU_EMU)	+= arch/sh/math-emu/
 
-# Boards
-machdir-$(CONFIG_SH_SOLUTION_ENGINE)		+= se/770x
-machdir-$(CONFIG_SH_7722_SOLUTION_ENGINE)	+= se/7722
-machdir-$(CONFIG_SH_7751_SOLUTION_ENGINE)	+= se/7751
-machdir-$(CONFIG_SH_7780_SOLUTION_ENGINE)	+= se/7780
-machdir-$(CONFIG_SH_7343_SOLUTION_ENGINE)	+= se/7343
-machdir-$(CONFIG_SH_7721_SOLUTION_ENGINE)	+= se/7721
-machdir-$(CONFIG_SH_HP6XX)			+= hp6xx
-machdir-$(CONFIG_SH_DREAMCAST)			+= dreamcast
-machdir-$(CONFIG_SH_SH03)			+= sh03
-machdir-$(CONFIG_SH_SECUREEDGE5410)		+= snapgear
-machdir-$(CONFIG_SH_RTS7751R2D)			+= renesas/rts7751r2d
-machdir-$(CONFIG_SH_7751_SYSTEMH)		+= renesas/systemh
-machdir-$(CONFIG_SH_EDOSK7705)			+= renesas/edosk7705
-machdir-$(CONFIG_SH_HIGHLANDER)			+= renesas/r7780rp
-machdir-$(CONFIG_SH_MIGOR)			+= renesas/migor
-machdir-$(CONFIG_SH_SDK7780)			+= renesas/sdk7780
-machdir-$(CONFIG_SH_X3PROTO)			+= renesas/x3proto
-machdir-$(CONFIG_SH_SH4202_MICRODEV)		+= superh/microdev
-machdir-$(CONFIG_SH_LANDISK)			+= landisk
-machdir-$(CONFIG_SH_TITAN)			+= titan
-machdir-$(CONFIG_SH_SHMIN)			+= shmin
-machdir-$(CONFIG_SH_7206_SOLUTION_ENGINE)	+= se/7206
-machdir-$(CONFIG_SH_7619_SOLUTION_ENGINE)	+= se/7619
-machdir-$(CONFIG_SH_LBOX_RE2)			+= lboxre2
-machdir-$(CONFIG_SH_MAGIC_PANEL_R2)		+= magicpanelr2
-machdir-$(CONFIG_SH_CAYMAN)			+= cayman
-
-incdir-y	:= $(notdir $(machdir-y))
+# Mach groups
+machdir-$(CONFIG_SOLUTION_ENGINE)		+= mach-se
+machdir-$(CONFIG_SH_HP6XX)			+= mach-hp6xx
+machdir-$(CONFIG_SH_DREAMCAST)			+= mach-dreamcast
+machdir-$(CONFIG_SH_SH03)			+= mach-sh03
+machdir-$(CONFIG_SH_SECUREEDGE5410)		+= mach-snapgear
+machdir-$(CONFIG_SH_RTS7751R2D)			+= mach-r2d
+machdir-$(CONFIG_SH_7751_SYSTEMH)		+= mach-systemh
+machdir-$(CONFIG_SH_EDOSK7705)			+= mach-edosk7705
+machdir-$(CONFIG_SH_HIGHLANDER)			+= mach-highlander
+machdir-$(CONFIG_SH_MIGOR)			+= mach-migor
+machdir-$(CONFIG_SH_SDK7780)			+= mach-sdk7780
+machdir-$(CONFIG_SH_X3PROTO)			+= mach-x3proto
+machdir-$(CONFIG_SH_SH7763RDP)			+= mach-sh7763rdp
+machdir-$(CONFIG_SH_SH4202_MICRODEV)		+= mach-microdev
+machdir-$(CONFIG_SH_LANDISK)			+= mach-landisk
+machdir-$(CONFIG_SH_TITAN)			+= mach-titan
+machdir-$(CONFIG_SH_LBOX_RE2)			+= mach-lboxre2
+machdir-$(CONFIG_SH_CAYMAN)			+= mach-cayman
 
 ifneq ($(machdir-y),)
 core-y	+= $(addprefix arch/sh/boards/, \
@@ -141,67 +126,40 @@ endif
 # Companion chips
 core-$(CONFIG_HD6446X_SERIES)	+= arch/sh/cchips/hd6446x/
 
-cpuincdir-$(CONFIG_CPU_SH2)	:= cpu-sh2
-cpuincdir-$(CONFIG_CPU_SH2A)	:= cpu-sh2a
-cpuincdir-$(CONFIG_CPU_SH3)	:= cpu-sh3
-cpuincdir-$(CONFIG_CPU_SH4)	:= cpu-sh4
-cpuincdir-$(CONFIG_CPU_SH5)	:= cpu-sh5
-
-libs-$(CONFIG_SUPERH32)		:= arch/sh/lib/	$(libs-y)
-libs-$(CONFIG_SUPERH64)		:= arch/sh/lib64/ $(libs-y)
-libs-y				+= $(LIBGCC)
+#
+# CPU header paths
+#
+# These are ordered by optimization level. A CPU family that is a subset
+# of another (ie, SH-2A / SH-2), is picked up first, with increasing
+# levels of genericness if nothing more suitable is situated in the
+# hierarchy.
+#
+# As an example, in order of preference, SH-2A > SH-2 > common definitions.
+#
+cpuincdir-$(CONFIG_CPU_SH2A)	+= cpu-sh2a
+cpuincdir-$(CONFIG_CPU_SH2)	+= cpu-sh2
+cpuincdir-$(CONFIG_CPU_SH3)	+= cpu-sh3
+cpuincdir-$(CONFIG_CPU_SH4)	+= cpu-sh4
+cpuincdir-$(CONFIG_CPU_SH5)	+= cpu-sh5
+cpuincdir-y			+= cpu-common	# Must be last
 
 drivers-y			+= arch/sh/drivers/
 drivers-$(CONFIG_OPROFILE)	+= arch/sh/oprofile/
 
 boot := arch/sh/boot
 
-ifneq ($(KBUILD_SRC),)
-incdir-prefix	:= $(srctree)/include/asm-sh/
-else
-incdir-prefix	:=
-endif
+cflags-y	+= $(foreach d, $(cpuincdir-y), -Iarch/sh/include/$(d)) \
+		   $(foreach d, $(machdir-y), -Iarch/sh/include/$(d))
 
-#	Update machine arch and proc symlinks if something which affects
-#	them changed.  We use .arch and .mach to indicate when they were
-#	updated last, otherwise make uses the target directory mtime.
+KBUILD_CFLAGS		+= -pipe $(cflags-y)
+KBUILD_CPPFLAGS		+= $(cflags-y)
+KBUILD_AFLAGS		+= $(cflags-y)
 
-include/asm-sh/.cpu: $(wildcard include/config/cpu/*.h) \
-		     include/config/auto.conf FORCE
-	@echo '  SYMLINK include/asm-sh/cpu -> include/asm-sh/$(cpuincdir-y)'
-	$(Q)if [ ! -d include/asm-sh ]; then mkdir -p include/asm-sh; fi
-	$(Q)ln -fsn $(incdir-prefix)$(cpuincdir-y) include/asm-sh/cpu
-	@touch $@
+LIBGCC := $(shell $(CC) $(KBUILD_CFLAGS) -print-libgcc-file-name)
 
-#	Most boards have their own mach directories.  For the ones that
-#	don't, just reference the parent directory so the semantics are
-#	kept roughly the same.
-#
-#	When multiple boards are compiled in at the same time, preference
-#	for the mach link is given to whichever has a directory for its
-#	headers. However, this is only a workaround until platforms that
-#	can live in the same kernel image back away from relying on the
-#	mach link.
-
-include/asm-sh/.mach: $(wildcard include/config/sh/*.h) \
-		      include/config/auto.conf FORCE
-	$(Q)if [ ! -d include/asm-sh ]; then mkdir -p include/asm-sh; fi
-	$(Q)rm -f include/asm-sh/mach
-	$(Q)for i in $(incdir-y); do \
-	if [ -d $(srctree)/include/asm-sh/$$i ]; then \
-		echo -n '  SYMLINK include/asm-sh/mach -> '; \
-		echo -e "include/asm-sh/$$i"; \
-		ln -fsn $(incdir-prefix)$$i \
-			include/asm-sh/mach; \
-	else \
-		if [ ! -d include/asm-sh/mach ]; then \
-			echo -n '  SYMLINK include/asm-sh/mach -> '; \
-			echo -e 'include/asm-sh'; \
-			ln -fsn $(incdir-prefix)../asm-sh include/asm-sh/mach; \
-		fi; \
-	fi; \
-	done
-	@touch $@
+libs-$(CONFIG_SUPERH32)		:= arch/sh/lib/	$(libs-y)
+libs-$(CONFIG_SUPERH64)		:= arch/sh/lib64/ $(libs-y)
+libs-y				+= $(LIBGCC)
 
 PHONY += maketools FORCE
 
@@ -215,8 +173,7 @@ zImage uImage uImage.srec vmlinux.srec: vmlinux
 
 compressed: zImage
 
-archprepare: include/asm-sh/.cpu include/asm-sh/.mach maketools \
-	     arch/sh/lib64/syscalltab.h
+archprepare: maketools arch/sh/lib64/syscalltab.h
 
 archclean:
 	$(Q)$(MAKE) $(clean)=$(boot)
@@ -258,6 +215,4 @@ arch/sh/lib64/syscalltab.h: arch/sh/kernel/syscalls_64.S
 	$(call filechk,gen-syscalltab)
 
 CLEAN_FILES += arch/sh/lib64/syscalltab.h \
-	       include/asm-sh/machtypes.h \
-	       include/asm-sh/cpu include/asm-sh/.cpu \
-	       include/asm-sh/mach include/asm-sh/.mach
+	       include/asm-sh/machtypes.h
diff --git a/arch/sh/boards/Kconfig b/arch/sh/boards/Kconfig
new file mode 100644
index 000000000000..ae194869fd60
--- /dev/null
+++ b/arch/sh/boards/Kconfig
@@ -0,0 +1,258 @@
+menu "Board support"
+
+config SOLUTION_ENGINE
+	bool
+
+config SH_SOLUTION_ENGINE
+	bool "SolutionEngine"
+	select SOLUTION_ENGINE
+	select CPU_HAS_IPR_IRQ
+	depends on CPU_SUBTYPE_SH7705 || CPU_SUBTYPE_SH7709 || CPU_SUBTYPE_SH7710 || \
+	  CPU_SUBTYPE_SH7712 || CPU_SUBTYPE_SH7750 || CPU_SUBTYPE_SH7750S || \
+	  CPU_SUBTYPE_SH7750R 
+	help
+	  Select SolutionEngine if configuring for a Hitachi SH7705, SH7709,
+	  SH7710, SH7712, SH7750, SH7750S or SH7750R evaluation board.
+
+config SH_7206_SOLUTION_ENGINE
+	bool "SolutionEngine7206"
+	select SOLUTION_ENGINE
+	depends on CPU_SUBTYPE_SH7206
+	help
+	  Select 7206 SolutionEngine if configuring for a Hitachi SH7206
+	  evaluation board.
+
+config SH_7619_SOLUTION_ENGINE
+	bool "SolutionEngine7619"
+	select SOLUTION_ENGINE
+	depends on CPU_SUBTYPE_SH7619
+	help
+	  Select 7619 SolutionEngine if configuring for a Hitachi SH7619
+	  evaluation board.
+	
+config SH_7721_SOLUTION_ENGINE
+	bool "SolutionEngine7721"
+	select SOLUTION_ENGINE
+	depends on CPU_SUBTYPE_SH7721
+	help
+	  Select 7721 SolutionEngine if configuring for a Hitachi SH7721
+	  evaluation board.
+
+config SH_7722_SOLUTION_ENGINE
+	bool "SolutionEngine7722"
+	select SOLUTION_ENGINE
+	depends on CPU_SUBTYPE_SH7722
+	help
+	  Select 7722 SolutionEngine if configuring for a Hitachi SH772
+	  evaluation board.
+
+config SH_7751_SOLUTION_ENGINE
+	bool "SolutionEngine7751"
+	select SOLUTION_ENGINE
+	select CPU_HAS_IPR_IRQ
+	depends on CPU_SUBTYPE_SH7751
+	help
+	  Select 7751 SolutionEngine if configuring for a Hitachi SH7751
+	  evaluation board.
+	  
+config SH_7780_SOLUTION_ENGINE
+	bool "SolutionEngine7780"
+	select SOLUTION_ENGINE
+	select SYS_SUPPORTS_PCI
+	depends on CPU_SUBTYPE_SH7780
+	help
+	  Select 7780 SolutionEngine if configuring for a Renesas SH7780
+	  evaluation board.
+
+config SH_7343_SOLUTION_ENGINE
+	bool "SolutionEngine7343"
+	select SOLUTION_ENGINE
+	depends on CPU_SUBTYPE_SH7343
+	help
+	  Select 7343 SolutionEngine if configuring for a Hitachi
+	  SH7343 (SH-Mobile 3AS) evaluation board.
+
+config SH_7751_SYSTEMH
+	bool "SystemH7751R"
+	depends on CPU_SUBTYPE_SH7751R
+	help
+	  Select SystemH if you are configuring for a Renesas SystemH
+	  7751R evaluation board.
+
+config SH_HP6XX
+	bool "HP6XX"
+	select SYS_SUPPORTS_APM_EMULATION
+	select HD6446X_SERIES
+	depends on CPU_SUBTYPE_SH7709
+	help
+	  Select HP6XX if configuring for a HP jornada HP6xx.
+	  More information (hardware only) at
+	  <http://www.hp.com/jornada/>.
+
+config SH_DREAMCAST
+	bool "Dreamcast"
+	select SYS_SUPPORTS_PCI
+	depends on CPU_SUBTYPE_SH7091
+	help
+	  Select Dreamcast if configuring for a SEGA Dreamcast.
+	  More information at <http://www.linux-sh.org>
+
+config SH_SH03
+	bool "Interface CTP/PCI-SH03"
+	depends on CPU_SUBTYPE_SH7751
+	select CPU_HAS_IPR_IRQ
+	select SYS_SUPPORTS_PCI
+	help
+	  CTP/PCI-SH03 is a CPU module computer that is produced
+	  by Interface Corporation.
+	  More information at <http://www.interface.co.jp>
+
+config SH_SECUREEDGE5410
+	bool "SecureEdge5410"
+	depends on CPU_SUBTYPE_SH7751R
+	select CPU_HAS_IPR_IRQ
+	select SYS_SUPPORTS_PCI
+	help
+	  Select SecureEdge5410 if configuring for a SnapGear SH board.
+	  This includes both the OEM SecureEdge products as well as the
+	  SME product line.
+
+config SH_RTS7751R2D
+	bool "RTS7751R2D"
+	depends on CPU_SUBTYPE_SH7751R
+	select SYS_SUPPORTS_PCI
+	select IO_TRAPPED
+	help
+	  Select RTS7751R2D if configuring for a Renesas Technology
+	  Sales SH-Graphics board.
+
+config SH_RSK7203
+	bool "RSK7203"
+	depends on CPU_SUBTYPE_SH7203
+
+config SH_SDK7780
+	bool "SDK7780R3"
+	depends on CPU_SUBTYPE_SH7780
+	select SYS_SUPPORTS_PCI
+	help
+	  Select SDK7780 if configuring for a Renesas SH7780 SDK7780R3
+	  evaluation board.
+
+config SH_HIGHLANDER
+	bool "Highlander"
+	depends on CPU_SUBTYPE_SH7780 || CPU_SUBTYPE_SH7785
+	select SYS_SUPPORTS_PCI
+	select IO_TRAPPED
+
+config SH_SH7785LCR
+	bool "SH7785LCR"
+	depends on CPU_SUBTYPE_SH7785
+	select SYS_SUPPORTS_PCI
+	select IO_TRAPPED
+
+config SH_SH7785LCR_29BIT_PHYSMAPS
+	bool "SH7785LCR 29bit physmaps"
+	depends on SH_SH7785LCR
+	default y
+	help
+	  This board has 2 physical memory maps. It can be changed with
+	  DIP switch(S2-5). If you set the DIP switch for S2-5 = ON,
+	  you can access all on-board device in 29bit address mode.
+
+config SH_MIGOR
+	bool "Migo-R"
+	depends on CPU_SUBTYPE_SH7722
+	help
+	  Select Migo-R if configuring for the SH7722 Migo-R platform
+          by Renesas System Solutions Asia Pte. Ltd.
+
+config SH_AP325RXA
+	bool "AP-325RXA"
+	depends on CPU_SUBTYPE_SH7723
+	help
+	  Renesas "AP-325RXA" support.
+	  Compatible with ALGO SYSTEM CO.,LTD. "AP-320A"
+
+config SH_SH7763RDP
+	bool "SH7763RDP"
+	depends on CPU_SUBTYPE_SH7763
+	help
+	  Select SH7763RDP if configuring for a Renesas SH7763
+	  evaluation board.
+
+config SH_EDOSK7705
+	bool "EDOSK7705"
+	depends on CPU_SUBTYPE_SH7705
+
+config SH_SH4202_MICRODEV
+	bool "SH4-202 MicroDev"
+	depends on CPU_SUBTYPE_SH4_202
+	help
+	  Select SH4-202 MicroDev if configuring for a SuperH MicroDev board
+	  with an SH4-202 CPU.
+
+config SH_LANDISK
+	bool "LANDISK"
+	depends on CPU_SUBTYPE_SH7751R
+	select SYS_SUPPORTS_PCI
+	help
+	  I-O DATA DEVICE, INC. "LANDISK Series" support.
+
+config SH_TITAN
+	bool "TITAN"
+	depends on CPU_SUBTYPE_SH7751R
+	select CPU_HAS_IPR_IRQ
+	select SYS_SUPPORTS_PCI
+	help
+	  Select Titan if you are configuring for a Nimble Microsystems
+	  NetEngine NP51R.
+
+config SH_SHMIN
+	bool "SHMIN"
+	depends on CPU_SUBTYPE_SH7706
+	select CPU_HAS_IPR_IRQ
+	help
+	  Select SHMIN if configuring for the SHMIN board.
+
+config SH_LBOX_RE2
+	bool "L-BOX RE2"
+	depends on CPU_SUBTYPE_SH7751R
+	select SYS_SUPPORTS_PCI
+	help
+	  Select L-BOX RE2 if configuring for the NTT COMWARE L-BOX RE2.
+
+config SH_X3PROTO
+	bool "SH-X3 Prototype board"
+	depends on CPU_SUBTYPE_SHX3
+
+config SH_MAGIC_PANEL_R2
+	bool "Magic Panel R2"
+	depends on CPU_SUBTYPE_SH7720
+	help
+	  Select Magic Panel R2 if configuring for Magic Panel R2.
+
+config SH_CAYMAN
+	bool "Hitachi Cayman"
+	depends on CPU_SUBTYPE_SH5_101 || CPU_SUBTYPE_SH5_103
+	select SYS_SUPPORTS_PCI
+
+endmenu
+
+source "arch/sh/boards/mach-r2d/Kconfig"
+source "arch/sh/boards/mach-highlander/Kconfig"
+source "arch/sh/boards/mach-sdk7780/Kconfig"
+source "arch/sh/boards/mach-migor/Kconfig"
+
+if SH_MAGIC_PANEL_R2
+
+menu "Magic Panel R2 options"
+
+config SH_MAGIC_PANEL_R2_VERSION
+	int SH_MAGIC_PANEL_R2_VERSION
+	default "3"
+	help
+	  Set the version of the Magic Panel R2
+
+endmenu
+
+endif
diff --git a/arch/sh/boards/Makefile b/arch/sh/boards/Makefile
new file mode 100644
index 000000000000..463022c7df3c
--- /dev/null
+++ b/arch/sh/boards/Makefile
@@ -0,0 +1,8 @@
+#
+# Specific board support, not covered by a mach group.
+#
+obj-$(CONFIG_SH_AP325RXA)	+= board-ap325rxa.o
+obj-$(CONFIG_SH_MAGIC_PANEL_R2)	+= board-magicpanelr2.o
+obj-$(CONFIG_SH_RSK7203)	+= board-rsk7203.o
+obj-$(CONFIG_SH_SH7785LCR)	+= board-sh7785lcr.o
+obj-$(CONFIG_SH_SHMIN)		+= board-shmin.o
diff --git a/arch/sh/boards/board-ap325rxa.c b/arch/sh/boards/board-ap325rxa.c
new file mode 100644
index 000000000000..fd1612590bf4
--- /dev/null
+++ b/arch/sh/boards/board-ap325rxa.c
@@ -0,0 +1,320 @@
+/*
+ * Renesas - AP-325RXA
+ * (Compatible with Algo System ., LTD. - AP-320A)
+ *
+ * Copyright (C) 2008 Renesas Solutions Corp.
+ * Author : Yusuke Goda <goda.yuske@renesas.com>
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#include <linux/init.h>
+#include <linux/device.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/physmap.h>
+#include <linux/delay.h>
+#include <linux/i2c.h>
+#include <linux/smc911x.h>
+#include <media/soc_camera_platform.h>
+#include <media/sh_mobile_ceu.h>
+#include <asm/sh_mobile_lcdc.h>
+#include <asm/io.h>
+#include <asm/clock.h>
+
+static struct smc911x_platdata smc911x_info = {
+	.flags = SMC911X_USE_32BIT,
+	.irq_flags = IRQF_TRIGGER_LOW,
+};
+
+static struct resource smc9118_resources[] = {
+	[0] = {
+		.start	= 0xb6080000,
+		.end	= 0xb60fffff,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= 35,
+		.end	= 35,
+		.flags	= IORESOURCE_IRQ,
+	}
+};
+
+static struct platform_device smc9118_device = {
+	.name		= "smc911x",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(smc9118_resources),
+	.resource	= smc9118_resources,
+	.dev		= {
+		.platform_data = &smc911x_info,
+	},
+};
+
+static struct mtd_partition ap325rxa_nor_flash_partitions[] = {
+	{
+		 .name = "uboot",
+		 .offset = 0,
+		 .size = (1 * 1024 * 1024),
+		 .mask_flags = MTD_WRITEABLE,	/* Read-only */
+	}, {
+		 .name = "kernel",
+		 .offset = MTDPART_OFS_APPEND,
+		 .size = (2 * 1024 * 1024),
+	}, {
+		 .name = "other",
+		 .offset = MTDPART_OFS_APPEND,
+		 .size = MTDPART_SIZ_FULL,
+	},
+};
+
+static struct physmap_flash_data ap325rxa_nor_flash_data = {
+	.width		= 2,
+	.parts		= ap325rxa_nor_flash_partitions,
+	.nr_parts	= ARRAY_SIZE(ap325rxa_nor_flash_partitions),
+};
+
+static struct resource ap325rxa_nor_flash_resources[] = {
+	[0] = {
+		.name	= "NOR Flash",
+		.start	= 0x00000000,
+		.end	= 0x00ffffff,
+		.flags	= IORESOURCE_MEM,
+	}
+};
+
+static struct platform_device ap325rxa_nor_flash_device = {
+	.name		= "physmap-flash",
+	.resource	= ap325rxa_nor_flash_resources,
+	.num_resources	= ARRAY_SIZE(ap325rxa_nor_flash_resources),
+	.dev		= {
+		.platform_data = &ap325rxa_nor_flash_data,
+	},
+};
+
+#define FPGA_LCDREG	0xB4100180
+#define FPGA_BKLREG	0xB4100212
+#define FPGA_LCDREG_VAL	0x0018
+#define PORT_PHCR	0xA405010E
+#define PORT_PLCR	0xA4050114
+#define PORT_PMCR	0xA4050116
+#define PORT_PRCR	0xA405011C
+#define PORT_PSCR	0xA405011E
+#define PORT_PZCR	0xA405014C
+#define PORT_HIZCRA	0xA4050158
+#define PORT_MSELCRB	0xA4050182
+#define PORT_PSDR	0xA405013E
+#define PORT_PZDR	0xA405016C
+#define PORT_PSELD	0xA4050154
+
+static void ap320_wvga_power_on(void *board_data)
+{
+	msleep(100);
+
+	/* ASD AP-320/325 LCD ON */
+	ctrl_outw(FPGA_LCDREG_VAL, FPGA_LCDREG);
+
+	/* backlight */
+	ctrl_outw((ctrl_inw(PORT_PSCR) & ~0x00C0) | 0x40, PORT_PSCR);
+	ctrl_outb(ctrl_inb(PORT_PSDR) & ~0x08, PORT_PSDR);
+	ctrl_outw(0x100, FPGA_BKLREG);
+}
+
+static struct sh_mobile_lcdc_info lcdc_info = {
+	.clock_source = LCDC_CLK_EXTERNAL,
+	.ch[0] = {
+		.chan = LCDC_CHAN_MAINLCD,
+		.bpp = 16,
+		.interface_type = RGB18,
+		.clock_divider = 1,
+		.lcd_cfg = {
+			.name = "LB070WV1",
+			.xres = 800,
+			.yres = 480,
+			.left_margin = 40,
+			.right_margin = 160,
+			.hsync_len = 8,
+			.upper_margin = 63,
+			.lower_margin = 80,
+			.vsync_len = 1,
+			.sync = 0, /* hsync and vsync are active low */
+		},
+		.lcd_size_cfg = { /* 7.0 inch */
+			.width = 152,
+			.height = 91,
+		},
+		.board_cfg = {
+			.display_on = ap320_wvga_power_on,
+		},
+	}
+};
+
+static struct resource lcdc_resources[] = {
+	[0] = {
+		.name	= "LCDC",
+		.start	= 0xfe940000, /* P4-only space */
+		.end	= 0xfe941fff,
+		.flags	= IORESOURCE_MEM,
+	},
+};
+
+static struct platform_device lcdc_device = {
+	.name		= "sh_mobile_lcdc_fb",
+	.num_resources	= ARRAY_SIZE(lcdc_resources),
+	.resource	= lcdc_resources,
+	.dev		= {
+		.platform_data	= &lcdc_info,
+	},
+};
+
+#ifdef CONFIG_I2C
+static unsigned char camera_ncm03j_magic[] =
+{
+	0x87, 0x00, 0x88, 0x08, 0x89, 0x01, 0x8A, 0xE8,
+	0x1D, 0x00, 0x1E, 0x8A, 0x21, 0x00, 0x33, 0x36,
+	0x36, 0x60, 0x37, 0x08, 0x3B, 0x31, 0x44, 0x0F,
+	0x46, 0xF0, 0x4B, 0x28, 0x4C, 0x21, 0x4D, 0x55,
+	0x4E, 0x1B, 0x4F, 0xC7, 0x50, 0xFC, 0x51, 0x12,
+	0x58, 0x02, 0x66, 0xC0, 0x67, 0x46, 0x6B, 0xA0,
+	0x6C, 0x34, 0x7E, 0x25, 0x7F, 0x25, 0x8D, 0x0F,
+	0x92, 0x40, 0x93, 0x04, 0x94, 0x26, 0x95, 0x0A,
+	0x99, 0x03, 0x9A, 0xF0, 0x9B, 0x14, 0x9D, 0x7A,
+	0xC5, 0x02, 0xD6, 0x07, 0x59, 0x00, 0x5A, 0x1A,
+	0x5B, 0x2A, 0x5C, 0x37, 0x5D, 0x42, 0x5E, 0x56,
+	0xC8, 0x00, 0xC9, 0x1A, 0xCA, 0x2A, 0xCB, 0x37,
+	0xCC, 0x42, 0xCD, 0x56, 0xCE, 0x00, 0xCF, 0x1A,
+	0xD0, 0x2A, 0xD1, 0x37, 0xD2, 0x42, 0xD3, 0x56,
+	0x5F, 0x68, 0x60, 0x87, 0x61, 0xA3, 0x62, 0xBC,
+	0x63, 0xD4, 0x64, 0xEA, 0xD6, 0x0F,
+};
+
+static int camera_set_capture(struct soc_camera_platform_info *info,
+			      int enable)
+{
+	struct i2c_adapter *a = i2c_get_adapter(0);
+	struct i2c_msg msg;
+	int ret = 0;
+	int i;
+
+	if (!enable)
+		return 0; /* no disable for now */
+
+	for (i = 0; i < ARRAY_SIZE(camera_ncm03j_magic); i += 2) {
+		u_int8_t buf[8];
+
+		msg.addr = 0x6e;
+		msg.buf = buf;
+		msg.len = 2;
+		msg.flags = 0;
+
+		buf[0] = camera_ncm03j_magic[i];
+		buf[1] = camera_ncm03j_magic[i + 1];
+
+		ret = (ret < 0) ? ret : i2c_transfer(a, &msg, 1);
+	}
+
+	return ret;
+}
+
+static struct soc_camera_platform_info camera_info = {
+	.iface = 0,
+	.format_name = "UYVY",
+	.format_depth = 16,
+	.format = {
+		.pixelformat = V4L2_PIX_FMT_UYVY,
+		.colorspace = V4L2_COLORSPACE_SMPTE170M,
+		.width = 640,
+		.height = 480,
+	},
+	.bus_param = SOCAM_PCLK_SAMPLE_RISING | SOCAM_HSYNC_ACTIVE_HIGH |
+	SOCAM_VSYNC_ACTIVE_HIGH | SOCAM_MASTER | SOCAM_DATAWIDTH_8,
+	.set_capture = camera_set_capture,
+};
+
+static struct platform_device camera_device = {
+	.name		= "soc_camera_platform",
+	.dev		= {
+		.platform_data	= &camera_info,
+	},
+};
+#endif /* CONFIG_I2C */
+
+static struct sh_mobile_ceu_info sh_mobile_ceu_info = {
+	.flags = SOCAM_PCLK_SAMPLE_RISING | SOCAM_HSYNC_ACTIVE_HIGH |
+	SOCAM_VSYNC_ACTIVE_HIGH | SOCAM_MASTER | SOCAM_DATAWIDTH_8,
+};
+
+static struct resource ceu_resources[] = {
+	[0] = {
+		.name	= "CEU",
+		.start	= 0xfe910000,
+		.end	= 0xfe91009f,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start  = 52,
+		.flags  = IORESOURCE_IRQ,
+	},
+	[2] = {
+		/* place holder for contiguous memory */
+	},
+};
+
+static struct platform_device ceu_device = {
+	.name		= "sh_mobile_ceu",
+	.num_resources	= ARRAY_SIZE(ceu_resources),
+	.resource	= ceu_resources,
+	.dev		= {
+		.platform_data	= &sh_mobile_ceu_info,
+	},
+};
+
+static struct platform_device *ap325rxa_devices[] __initdata = {
+	&smc9118_device,
+	&ap325rxa_nor_flash_device,
+	&lcdc_device,
+	&ceu_device,
+#ifdef CONFIG_I2C
+	&camera_device,
+#endif
+};
+
+static struct i2c_board_info __initdata ap325rxa_i2c_devices[] = {
+};
+
+static int __init ap325rxa_devices_setup(void)
+{
+	clk_always_enable("mstp200"); /* LCDC */
+	clk_always_enable("mstp203"); /* CEU */
+
+	platform_resource_setup_memory(&ceu_device, "ceu", 4 << 20);
+
+	i2c_register_board_info(0, ap325rxa_i2c_devices,
+				ARRAY_SIZE(ap325rxa_i2c_devices));
+ 
+	return platform_add_devices(ap325rxa_devices,
+				ARRAY_SIZE(ap325rxa_devices));
+}
+device_initcall(ap325rxa_devices_setup);
+
+static void __init ap325rxa_setup(char **cmdline_p)
+{
+	/* LCDC configuration */
+	ctrl_outw(ctrl_inw(PORT_PHCR) & ~0xffff, PORT_PHCR);
+	ctrl_outw(ctrl_inw(PORT_PLCR) & ~0xffff, PORT_PLCR);
+	ctrl_outw(ctrl_inw(PORT_PMCR) & ~0xffff, PORT_PMCR);
+	ctrl_outw(ctrl_inw(PORT_PRCR) & ~0x03ff, PORT_PRCR);
+	ctrl_outw(ctrl_inw(PORT_HIZCRA) & ~0x01C0, PORT_HIZCRA);
+
+	/* CEU */
+	ctrl_outw(ctrl_inw(PORT_MSELCRB) & ~0x0001, PORT_MSELCRB);
+	ctrl_outw(ctrl_inw(PORT_PSELD) & ~0x0003, PORT_PSELD);
+	ctrl_outw((ctrl_inw(PORT_PZCR) & ~0xff00) | 0x5500, PORT_PZCR);
+	ctrl_outb((ctrl_inb(PORT_PZDR) & ~0xf0) | 0x20, PORT_PZDR);
+}
+
+static struct sh_machine_vector mv_ap325rxa __initmv = {
+	.mv_name = "AP-325RXA",
+	.mv_setup = ap325rxa_setup,
+};
diff --git a/arch/sh/boards/magicpanelr2/setup.c b/arch/sh/boards/board-magicpanelr2.c
index f3b8b07ea5d6..f3b8b07ea5d6 100644
--- a/arch/sh/boards/magicpanelr2/setup.c
+++ b/arch/sh/boards/board-magicpanelr2.c
diff --git a/arch/sh/boards/board-rsk7203.c b/arch/sh/boards/board-rsk7203.c
new file mode 100644
index 000000000000..ffbedc59a973
--- /dev/null
+++ b/arch/sh/boards/board-rsk7203.c
@@ -0,0 +1,136 @@
+/*
+ * Renesas Technology Europe RSK+ 7203 Support.
+ *
+ * Copyright (C) 2008 Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/init.h>
+#include <linux/types.h>
+#include <linux/platform_device.h>
+#include <linux/interrupt.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/physmap.h>
+#include <linux/mtd/map.h>
+#include <linux/smc911x.h>
+#include <asm/machvec.h>
+#include <asm/io.h>
+
+static struct smc911x_platdata smc911x_info = {
+	.flags		= SMC911X_USE_16BIT,
+	.irq_flags	= IRQF_TRIGGER_LOW,
+};
+
+static struct resource smc911x_resources[] = {
+	[0] = {
+		.start		= 0x24000000,
+		.end		= 0x24000000 + 0x100,
+		.flags		= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start		= 64,
+		.end		= 64,
+		.flags		= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device smc911x_device = {
+	.name		= "smc911x",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(smc911x_resources),
+	.resource	= smc911x_resources,
+	.dev		= {
+		.platform_data = &smc911x_info,
+	},
+};
+
+static const char *probes[] = { "cmdlinepart", NULL };
+
+static struct mtd_partition *parsed_partitions;
+
+static struct mtd_partition rsk7203_partitions[] = {
+	{
+		.name		= "Bootloader",
+		.offset		= 0x00000000,
+		.size		= 0x00040000,
+		.mask_flags	= MTD_WRITEABLE,
+	}, {
+		.name		= "Kernel",
+		.offset		= MTDPART_OFS_NXTBLK,
+		.size		= 0x001c0000,
+	}, {
+		.name		= "Flash_FS",
+		.offset		= MTDPART_OFS_NXTBLK,
+		.size		= MTDPART_SIZ_FULL,
+	}
+};
+
+static struct physmap_flash_data flash_data = {
+	.width		= 2,
+};
+
+static struct resource flash_resource = {
+	.start		= 0x20000000,
+	.end		= 0x20400000,
+	.flags		= IORESOURCE_MEM,
+};
+
+static struct platform_device flash_device = {
+	.name		= "physmap-flash",
+	.id		= -1,
+	.resource	= &flash_resource,
+	.num_resources	= 1,
+	.dev		= {
+		.platform_data = &flash_data,
+	},
+};
+
+static struct mtd_info *flash_mtd;
+
+static struct map_info rsk7203_flash_map = {
+	.name		= "RSK+ Flash",
+	.size		= 0x400000,
+	.bankwidth	= 2,
+};
+
+static void __init set_mtd_partitions(void)
+{
+	int nr_parts = 0;
+
+	simple_map_init(&rsk7203_flash_map);
+	flash_mtd = do_map_probe("cfi_probe", &rsk7203_flash_map);
+	nr_parts = parse_mtd_partitions(flash_mtd, probes,
+					&parsed_partitions, 0);
+	/* If there is no partition table, used the hard coded table */
+	if (nr_parts <= 0) {
+		flash_data.parts = rsk7203_partitions;
+		flash_data.nr_parts = ARRAY_SIZE(rsk7203_partitions);
+	} else {
+		flash_data.nr_parts = nr_parts;
+		flash_data.parts = parsed_partitions;
+	}
+}
+
+
+static struct platform_device *rsk7203_devices[] __initdata = {
+	&smc911x_device,
+	&flash_device,
+};
+
+static int __init rsk7203_devices_setup(void)
+{
+	set_mtd_partitions();
+	return platform_add_devices(rsk7203_devices,
+				    ARRAY_SIZE(rsk7203_devices));
+}
+device_initcall(rsk7203_devices_setup);
+
+/*
+ * The Machine Vector
+ */
+static struct sh_machine_vector mv_rsk7203 __initmv = {
+	.mv_name        = "RSK+7203",
+};
diff --git a/arch/sh/boards/board-sh7785lcr.c b/arch/sh/boards/board-sh7785lcr.c
new file mode 100644
index 000000000000..b95d674ee704
--- /dev/null
+++ b/arch/sh/boards/board-sh7785lcr.c
@@ -0,0 +1,302 @@
+/*
+ * Renesas Technology Corp. R0P7785LC0011RL Support.
+ *
+ * Copyright (C) 2008  Yoshihiro Shimoda
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/sm501.h>
+#include <linux/sm501-regs.h>
+#include <linux/fb.h>
+#include <linux/mtd/physmap.h>
+#include <linux/delay.h>
+#include <linux/i2c.h>
+#include <linux/i2c-pca-platform.h>
+#include <linux/i2c-algo-pca.h>
+#include <asm/heartbeat.h>
+#include <asm/sh7785lcr.h>
+
+/*
+ * NOTE: This board has 2 physical memory maps.
+ *	 Please look at include/asm-sh/sh7785lcr.h or hardware manual.
+ */
+static struct resource heartbeat_resources[] = {
+	[0] = {
+		.start	= PLD_LEDCR,
+		.end	= PLD_LEDCR,
+		.flags	= IORESOURCE_MEM,
+	},
+};
+
+static struct heartbeat_data heartbeat_data = {
+	.regsize = 8,
+};
+
+static struct platform_device heartbeat_device = {
+	.name		= "heartbeat",
+	.id		= -1,
+	.dev	= {
+		.platform_data	= &heartbeat_data,
+	},
+	.num_resources	= ARRAY_SIZE(heartbeat_resources),
+	.resource	= heartbeat_resources,
+};
+
+static struct mtd_partition nor_flash_partitions[] = {
+	{
+		.name		= "loader",
+		.offset		= 0x00000000,
+		.size		= 512 * 1024,
+	},
+	{
+		.name		= "bootenv",
+		.offset		= MTDPART_OFS_APPEND,
+		.size		= 512 * 1024,
+	},
+	{
+		.name		= "kernel",
+		.offset		= MTDPART_OFS_APPEND,
+		.size		= 4 * 1024 * 1024,
+	},
+	{
+		.name		= "data",
+		.offset		= MTDPART_OFS_APPEND,
+		.size		= MTDPART_SIZ_FULL,
+	},
+};
+
+static struct physmap_flash_data nor_flash_data = {
+	.width		= 4,
+	.parts		= nor_flash_partitions,
+	.nr_parts	= ARRAY_SIZE(nor_flash_partitions),
+};
+
+static struct resource nor_flash_resources[] = {
+	[0]	= {
+		.start	= NOR_FLASH_ADDR,
+		.end	= NOR_FLASH_ADDR + NOR_FLASH_SIZE - 1,
+		.flags	= IORESOURCE_MEM,
+	}
+};
+
+static struct platform_device nor_flash_device = {
+	.name		= "physmap-flash",
+	.dev		= {
+		.platform_data	= &nor_flash_data,
+	},
+	.num_resources	= ARRAY_SIZE(nor_flash_resources),
+	.resource	= nor_flash_resources,
+};
+
+static struct resource r8a66597_usb_host_resources[] = {
+	[0] = {
+		.name	= "r8a66597_hcd",
+		.start	= R8A66597_ADDR,
+		.end	= R8A66597_ADDR + R8A66597_SIZE - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.name	= "r8a66597_hcd",
+		.start	= 2,
+		.end	= 2,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device r8a66597_usb_host_device = {
+	.name		= "r8a66597_hcd",
+	.id		= -1,
+	.dev = {
+		.dma_mask		= NULL,
+		.coherent_dma_mask	= 0xffffffff,
+	},
+	.num_resources	= ARRAY_SIZE(r8a66597_usb_host_resources),
+	.resource	= r8a66597_usb_host_resources,
+};
+
+static struct resource sm501_resources[] = {
+	[0]	= {
+		.start	= SM107_MEM_ADDR,
+		.end	= SM107_MEM_ADDR + SM107_MEM_SIZE - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1]	= {
+		.start	= SM107_REG_ADDR,
+		.end	= SM107_REG_ADDR + SM107_REG_SIZE - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[2]	= {
+		.start	= 10,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct fb_videomode sm501_default_mode_crt = {
+	.pixclock	= 35714,	/* 28MHz */
+	.xres		= 640,
+	.yres		= 480,
+	.left_margin	= 105,
+	.right_margin	= 16,
+	.upper_margin	= 33,
+	.lower_margin	= 10,
+	.hsync_len	= 39,
+	.vsync_len	= 2,
+	.sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
+};
+
+static struct fb_videomode sm501_default_mode_pnl = {
+	.pixclock	= 40000,	/* 25MHz */
+	.xres		= 640,
+	.yres		= 480,
+	.left_margin	= 2,
+	.right_margin	= 16,
+	.upper_margin	= 33,
+	.lower_margin	= 10,
+	.hsync_len	= 39,
+	.vsync_len	= 2,
+	.sync		= 0,
+};
+
+static struct sm501_platdata_fbsub sm501_pdata_fbsub_pnl = {
+	.def_bpp	= 16,
+	.def_mode	= &sm501_default_mode_pnl,
+	.flags		= SM501FB_FLAG_USE_INIT_MODE |
+			  SM501FB_FLAG_USE_HWCURSOR |
+			  SM501FB_FLAG_USE_HWACCEL |
+			  SM501FB_FLAG_DISABLE_AT_EXIT |
+			  SM501FB_FLAG_PANEL_NO_VBIASEN,
+};
+
+static struct sm501_platdata_fbsub sm501_pdata_fbsub_crt = {
+	.def_bpp	= 16,
+	.def_mode	= &sm501_default_mode_crt,
+	.flags		= SM501FB_FLAG_USE_INIT_MODE |
+			  SM501FB_FLAG_USE_HWCURSOR |
+			  SM501FB_FLAG_USE_HWACCEL |
+			  SM501FB_FLAG_DISABLE_AT_EXIT,
+};
+
+static struct sm501_platdata_fb sm501_fb_pdata = {
+	.fb_route	= SM501_FB_OWN,
+	.fb_crt		= &sm501_pdata_fbsub_crt,
+	.fb_pnl		= &sm501_pdata_fbsub_pnl,
+};
+
+static struct sm501_initdata sm501_initdata = {
+	.gpio_high	= {
+		.set	= 0x00001fe0,
+		.mask	= 0x0,
+	},
+	.devices	= 0,
+	.mclk		= 84 * 1000000,
+	.m1xclk		= 112 * 1000000,
+};
+
+static struct sm501_platdata sm501_platform_data = {
+	.init		= &sm501_initdata,
+	.fb		= &sm501_fb_pdata,
+};
+
+static struct platform_device sm501_device = {
+	.name		= "sm501",
+	.id		= -1,
+	.dev		= {
+		.platform_data	= &sm501_platform_data,
+	},
+	.num_resources	= ARRAY_SIZE(sm501_resources),
+	.resource	= sm501_resources,
+};
+
+static struct resource i2c_resources[] = {
+	[0] = {
+		.start	= PCA9564_ADDR,
+		.end	= PCA9564_ADDR + PCA9564_SIZE - 1,
+		.flags	= IORESOURCE_MEM | IORESOURCE_MEM_8BIT,
+	},
+	[1] = {
+		.start	= 12,
+		.end	= 12,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct i2c_pca9564_pf_platform_data i2c_platform_data = {
+	.gpio			= 0,
+	.i2c_clock_speed	= I2C_PCA_CON_330kHz,
+	.timeout		= 100,
+};
+
+static struct platform_device i2c_device = {
+	.name		= "i2c-pca-platform",
+	.id		= -1,
+	.dev		= {
+		.platform_data	= &i2c_platform_data,
+	},
+	.num_resources	= ARRAY_SIZE(i2c_resources),
+	.resource	= i2c_resources,
+};
+
+static struct platform_device *sh7785lcr_devices[] __initdata = {
+	&heartbeat_device,
+	&nor_flash_device,
+	&r8a66597_usb_host_device,
+	&sm501_device,
+	&i2c_device,
+};
+
+static struct i2c_board_info __initdata sh7785lcr_i2c_devices[] = {
+	{
+		I2C_BOARD_INFO("r2025sd", 0x32),
+	},
+};
+
+static int __init sh7785lcr_devices_setup(void)
+{
+	i2c_register_board_info(0, sh7785lcr_i2c_devices,
+				ARRAY_SIZE(sh7785lcr_i2c_devices));
+
+	return platform_add_devices(sh7785lcr_devices,
+				    ARRAY_SIZE(sh7785lcr_devices));
+}
+__initcall(sh7785lcr_devices_setup);
+
+/* Initialize IRQ setting */
+void __init init_sh7785lcr_IRQ(void)
+{
+	plat_irq_setup_pins(IRQ_MODE_IRQ7654);
+	plat_irq_setup_pins(IRQ_MODE_IRQ3210);
+}
+
+static void sh7785lcr_power_off(void)
+{
+	ctrl_outb(0x01, P2SEGADDR(PLD_POFCR));
+}
+
+/* Initialize the board */
+static void __init sh7785lcr_setup(char **cmdline_p)
+{
+	void __iomem *sm501_reg;
+
+	printk(KERN_INFO "Renesas Technology Corp. R0P7785LC0011RL support.\n");
+
+	pm_power_off = sh7785lcr_power_off;
+
+	/* sm501 DRAM configuration */
+	sm501_reg = (void __iomem *)0xb3e00000 + SM501_DRAM_CONTROL;
+	writel(0x000307c2, sm501_reg);
+}
+
+/*
+ * The Machine Vector
+ */
+static struct sh_machine_vector mv_sh7785lcr __initmv = {
+	.mv_name		= "SH7785LCR",
+	.mv_setup		= sh7785lcr_setup,
+	.mv_init_irq		= init_sh7785lcr_IRQ,
+};
+
diff --git a/arch/sh/boards/shmin/setup.c b/arch/sh/boards/board-shmin.c
index 16e5dae8ecfb..16e5dae8ecfb 100644
--- a/arch/sh/boards/shmin/setup.c
+++ b/arch/sh/boards/board-shmin.c
diff --git a/arch/sh/boards/cayman/irq.c b/arch/sh/boards/cayman/irq.c
deleted file mode 100644
index 30ec7bebfaf1..000000000000
--- a/arch/sh/boards/cayman/irq.c
+++ /dev/null
@@ -1,197 +0,0 @@
-/*
- * arch/sh/mach-cayman/irq.c - SH-5 Cayman Interrupt Support
- *
- * This file handles the board specific parts of the Cayman interrupt system
- *
- * Copyright (C) 2002 Stuart Menefy
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-#include <linux/io.h>
-#include <linux/irq.h>
-#include <linux/interrupt.h>
-#include <linux/signal.h>
-#include <asm/cpu/irq.h>
-#include <asm/page.h>
-
-/* Setup for the SMSC FDC37C935 / LAN91C100FD */
-#define SMSC_IRQ         IRQ_IRL1
-
-/* Setup for PCI Bus 2, which transmits interrupts via the EPLD */
-#define PCI2_IRQ         IRQ_IRL3
-
-unsigned long epld_virt;
-
-#define EPLD_BASE        0x04002000
-#define EPLD_STATUS_BASE (epld_virt + 0x10)
-#define EPLD_MASK_BASE   (epld_virt + 0x20)
-
-/* Note the SMSC SuperIO chip and SMSC LAN chip interrupts are all muxed onto
-   the same SH-5 interrupt */
-
-static irqreturn_t cayman_interrupt_smsc(int irq, void *dev_id)
-{
-        printk(KERN_INFO "CAYMAN: spurious SMSC interrupt\n");
-	return IRQ_NONE;
-}
-
-static irqreturn_t cayman_interrupt_pci2(int irq, void *dev_id)
-{
-        printk(KERN_INFO "CAYMAN: spurious PCI interrupt, IRQ %d\n", irq);
-	return IRQ_NONE;
-}
-
-static struct irqaction cayman_action_smsc = {
-	.name		= "Cayman SMSC Mux",
-	.handler	= cayman_interrupt_smsc,
-	.flags		= IRQF_DISABLED,
-};
-
-static struct irqaction cayman_action_pci2 = {
-	.name		= "Cayman PCI2 Mux",
-	.handler	= cayman_interrupt_pci2,
-	.flags		= IRQF_DISABLED,
-};
-
-static void enable_cayman_irq(unsigned int irq)
-{
-	unsigned long flags;
-	unsigned long mask;
-	unsigned int reg;
-	unsigned char bit;
-
-	irq -= START_EXT_IRQS;
-	reg = EPLD_MASK_BASE + ((irq / 8) << 2);
-	bit = 1<<(irq % 8);
-	local_irq_save(flags);
-	mask = ctrl_inl(reg);
-	mask |= bit;
-	ctrl_outl(mask, reg);
-	local_irq_restore(flags);
-}
-
-void disable_cayman_irq(unsigned int irq)
-{
-	unsigned long flags;
-	unsigned long mask;
-	unsigned int reg;
-	unsigned char bit;
-
-	irq -= START_EXT_IRQS;
-	reg = EPLD_MASK_BASE + ((irq / 8) << 2);
-	bit = 1<<(irq % 8);
-	local_irq_save(flags);
-	mask = ctrl_inl(reg);
-	mask &= ~bit;
-	ctrl_outl(mask, reg);
-	local_irq_restore(flags);
-}
-
-static void ack_cayman_irq(unsigned int irq)
-{
-	disable_cayman_irq(irq);
-}
-
-static void end_cayman_irq(unsigned int irq)
-{
-	if (!(irq_desc[irq].status & (IRQ_DISABLED|IRQ_INPROGRESS)))
-		enable_cayman_irq(irq);
-}
-
-static unsigned int startup_cayman_irq(unsigned int irq)
-{
-	enable_cayman_irq(irq);
-	return 0; /* never anything pending */
-}
-
-static void shutdown_cayman_irq(unsigned int irq)
-{
-	disable_cayman_irq(irq);
-}
-
-struct hw_interrupt_type cayman_irq_type = {
-	.typename	= "Cayman-IRQ",
-	.startup	= startup_cayman_irq,
-	.shutdown	= shutdown_cayman_irq,
-	.enable		= enable_cayman_irq,
-	.disable	= disable_cayman_irq,
-	.ack		= ack_cayman_irq,
-	.end		= end_cayman_irq,
-};
-
-int cayman_irq_demux(int evt)
-{
-	int irq = intc_evt_to_irq[evt];
-
-	if (irq == SMSC_IRQ) {
-		unsigned long status;
-		int i;
-
-		status = ctrl_inl(EPLD_STATUS_BASE) &
-			 ctrl_inl(EPLD_MASK_BASE) & 0xff;
-		if (status == 0) {
-			irq = -1;
-		} else {
-			for (i=0; i<8; i++) {
-				if (status & (1<<i))
-					break;
-			}
-			irq = START_EXT_IRQS + i;
-		}
-	}
-
-	if (irq == PCI2_IRQ) {
-		unsigned long status;
-		int i;
-
-		status = ctrl_inl(EPLD_STATUS_BASE + 3 * sizeof(u32)) &
-			 ctrl_inl(EPLD_MASK_BASE + 3 * sizeof(u32)) & 0xff;
-		if (status == 0) {
-			irq = -1;
-		} else {
-			for (i=0; i<8; i++) {
-				if (status & (1<<i))
-					break;
-			}
-			irq = START_EXT_IRQS + (3 * 8) + i;
-		}
-	}
-
-	return irq;
-}
-
-#if defined(CONFIG_PROC_FS) && defined(CONFIG_SYSCTL)
-int cayman_irq_describe(char* p, int irq)
-{
-	if (irq < NR_INTC_IRQS) {
-		return intc_irq_describe(p, irq);
-	} else if (irq < NR_INTC_IRQS + 8) {
-		return sprintf(p, "(SMSC %d)", irq - NR_INTC_IRQS);
-	} else if ((irq >= NR_INTC_IRQS + 24) && (irq < NR_INTC_IRQS + 32)) {
-		return sprintf(p, "(PCI2 %d)", irq - (NR_INTC_IRQS + 24));
-	}
-
-	return 0;
-}
-#endif
-
-void init_cayman_irq(void)
-{
-	int i;
-
-	epld_virt = onchip_remap(EPLD_BASE, 1024, "EPLD");
-	if (!epld_virt) {
-		printk(KERN_ERR "Cayman IRQ: Unable to remap EPLD\n");
-		return;
-	}
-
-	for (i=0; i<NR_EXT_IRQS; i++) {
-		irq_desc[START_EXT_IRQS + i].chip = &cayman_irq_type;
-	}
-
-	/* Setup the SMSC interrupt */
-	setup_irq(SMSC_IRQ, &cayman_action_smsc);
-	setup_irq(PCI2_IRQ, &cayman_action_pci2);
-}
diff --git a/arch/sh/boards/cayman/setup.c b/arch/sh/boards/cayman/setup.c
deleted file mode 100644
index 8c9fa472d8f5..000000000000
--- a/arch/sh/boards/cayman/setup.c
+++ /dev/null
@@ -1,187 +0,0 @@
-/*
- * arch/sh/mach-cayman/setup.c
- *
- * SH5 Cayman support
- *
- * Copyright (C) 2002  David J. Mckay & Benedict Gaster
- * Copyright (C) 2003 - 2007  Paul Mundt
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-#include <linux/init.h>
-#include <linux/io.h>
-#include <linux/kernel.h>
-#include <asm/cpu/irq.h>
-
-/*
- * Platform Dependent Interrupt Priorities.
- */
-
-/* Using defaults defined in irq.h */
-#define	RES NO_PRIORITY		/* Disabled */
-#define IR0 IRL0_PRIORITY	/* IRLs */
-#define IR1 IRL1_PRIORITY
-#define IR2 IRL2_PRIORITY
-#define IR3 IRL3_PRIORITY
-#define PCA INTA_PRIORITY	/* PCI Ints */
-#define PCB INTB_PRIORITY
-#define PCC INTC_PRIORITY
-#define PCD INTD_PRIORITY
-#define SER TOP_PRIORITY
-#define ERR TOP_PRIORITY
-#define PW0 TOP_PRIORITY
-#define PW1 TOP_PRIORITY
-#define PW2 TOP_PRIORITY
-#define PW3 TOP_PRIORITY
-#define DM0 NO_PRIORITY		/* DMA Ints */
-#define DM1 NO_PRIORITY
-#define DM2 NO_PRIORITY
-#define DM3 NO_PRIORITY
-#define DAE NO_PRIORITY
-#define TU0 TIMER_PRIORITY	/* TMU Ints */
-#define TU1 NO_PRIORITY
-#define TU2 NO_PRIORITY
-#define TI2 NO_PRIORITY
-#define ATI NO_PRIORITY		/* RTC Ints */
-#define PRI NO_PRIORITY
-#define CUI RTC_PRIORITY
-#define ERI SCIF_PRIORITY	/* SCIF Ints */
-#define RXI SCIF_PRIORITY
-#define BRI SCIF_PRIORITY
-#define TXI SCIF_PRIORITY
-#define ITI TOP_PRIORITY	/* WDT Ints */
-
-/* Setup for the SMSC FDC37C935 */
-#define SMSC_SUPERIO_BASE	0x04000000
-#define SMSC_CONFIG_PORT_ADDR	0x3f0
-#define SMSC_INDEX_PORT_ADDR	SMSC_CONFIG_PORT_ADDR
-#define SMSC_DATA_PORT_ADDR	0x3f1
-
-#define SMSC_ENTER_CONFIG_KEY	0x55
-#define SMSC_EXIT_CONFIG_KEY	0xaa
-
-#define SMCS_LOGICAL_DEV_INDEX	0x07
-#define SMSC_DEVICE_ID_INDEX	0x20
-#define SMSC_DEVICE_REV_INDEX	0x21
-#define SMSC_ACTIVATE_INDEX	0x30
-#define SMSC_PRIMARY_BASE_INDEX  0x60
-#define SMSC_SECONDARY_BASE_INDEX 0x62
-#define SMSC_PRIMARY_INT_INDEX	0x70
-#define SMSC_SECONDARY_INT_INDEX 0x72
-
-#define SMSC_IDE1_DEVICE	1
-#define SMSC_KEYBOARD_DEVICE	7
-#define SMSC_CONFIG_REGISTERS	8
-
-#define SMSC_SUPERIO_READ_INDEXED(index) ({ \
-	outb((index), SMSC_INDEX_PORT_ADDR); \
-	inb(SMSC_DATA_PORT_ADDR); })
-#define SMSC_SUPERIO_WRITE_INDEXED(val, index) ({ \
-	outb((index), SMSC_INDEX_PORT_ADDR); \
-	outb((val),   SMSC_DATA_PORT_ADDR); })
-
-#define IDE1_PRIMARY_BASE	0x01f0
-#define IDE1_SECONDARY_BASE	0x03f6
-
-unsigned long smsc_superio_virt;
-
-int platform_int_priority[NR_INTC_IRQS] = {
-	IR0, IR1, IR2, IR3, PCA, PCB, PCC, PCD,	/* IRQ  0- 7 */
-	RES, RES, RES, RES, SER, ERR, PW3, PW2,	/* IRQ  8-15 */
-	PW1, PW0, DM0, DM1, DM2, DM3, DAE, RES,	/* IRQ 16-23 */
-	RES, RES, RES, RES, RES, RES, RES, RES,	/* IRQ 24-31 */
-	TU0, TU1, TU2, TI2, ATI, PRI, CUI, ERI,	/* IRQ 32-39 */
-	RXI, BRI, TXI, RES, RES, RES, RES, RES,	/* IRQ 40-47 */
-	RES, RES, RES, RES, RES, RES, RES, RES,	/* IRQ 48-55 */
-	RES, RES, RES, RES, RES, RES, RES, ITI,	/* IRQ 56-63 */
-};
-
-static int __init smsc_superio_setup(void)
-{
-	unsigned char devid, devrev;
-
-	smsc_superio_virt = onchip_remap(SMSC_SUPERIO_BASE, 1024, "SMSC SuperIO");
-	if (!smsc_superio_virt) {
-		panic("Unable to remap SMSC SuperIO\n");
-	}
-
-	/* Initially the chip is in run state */
-	/* Put it into configuration state */
-	outb(SMSC_ENTER_CONFIG_KEY, SMSC_CONFIG_PORT_ADDR);
-	outb(SMSC_ENTER_CONFIG_KEY, SMSC_CONFIG_PORT_ADDR);
-
-	/* Read device ID info */
-	devid = SMSC_SUPERIO_READ_INDEXED(SMSC_DEVICE_ID_INDEX);
-	devrev = SMSC_SUPERIO_READ_INDEXED(SMSC_DEVICE_REV_INDEX);
-	printk("SMSC SuperIO devid %02x rev %02x\n", devid, devrev);
-
-	/* Select the keyboard device */
-	SMSC_SUPERIO_WRITE_INDEXED(SMSC_KEYBOARD_DEVICE, SMCS_LOGICAL_DEV_INDEX);
-
-	/* enable it */
-	SMSC_SUPERIO_WRITE_INDEXED(1, SMSC_ACTIVATE_INDEX);
-
-	/* Select the interrupts */
-	/* On a PC keyboard is IRQ1, mouse is IRQ12 */
-	SMSC_SUPERIO_WRITE_INDEXED(1, SMSC_PRIMARY_INT_INDEX);
-	SMSC_SUPERIO_WRITE_INDEXED(12, SMSC_SECONDARY_INT_INDEX);
-
-#ifdef CONFIG_IDE
-	/*
-	 * Only IDE1 exists on the Cayman
-	 */
-
-	/* Power it on */
-	SMSC_SUPERIO_WRITE_INDEXED(1 << SMSC_IDE1_DEVICE, 0x22);
-
-	SMSC_SUPERIO_WRITE_INDEXED(SMSC_IDE1_DEVICE, SMCS_LOGICAL_DEV_INDEX);
-	SMSC_SUPERIO_WRITE_INDEXED(1, SMSC_ACTIVATE_INDEX);
-
-	SMSC_SUPERIO_WRITE_INDEXED(IDE1_PRIMARY_BASE >> 8,
-				   SMSC_PRIMARY_BASE_INDEX + 0);
-	SMSC_SUPERIO_WRITE_INDEXED(IDE1_PRIMARY_BASE & 0xff,
-				   SMSC_PRIMARY_BASE_INDEX + 1);
-
-	SMSC_SUPERIO_WRITE_INDEXED(IDE1_SECONDARY_BASE >> 8,
-				   SMSC_SECONDARY_BASE_INDEX + 0);
-	SMSC_SUPERIO_WRITE_INDEXED(IDE1_SECONDARY_BASE & 0xff,
-				   SMSC_SECONDARY_BASE_INDEX + 1);
-
-	SMSC_SUPERIO_WRITE_INDEXED(14, SMSC_PRIMARY_INT_INDEX);
-
-	SMSC_SUPERIO_WRITE_INDEXED(SMSC_CONFIG_REGISTERS,
-				   SMCS_LOGICAL_DEV_INDEX);
-
-	SMSC_SUPERIO_WRITE_INDEXED(0x00, 0xc2); /* GP42 = nIDE1_OE */
-	SMSC_SUPERIO_WRITE_INDEXED(0x01, 0xc5); /* GP45 = IDE1_IRQ */
-	SMSC_SUPERIO_WRITE_INDEXED(0x00, 0xc6); /* GP46 = nIOROP */
-	SMSC_SUPERIO_WRITE_INDEXED(0x00, 0xc7); /* GP47 = nIOWOP */
-#endif
-
-	/* Exit the configuration state */
-	outb(SMSC_EXIT_CONFIG_KEY, SMSC_CONFIG_PORT_ADDR);
-
-	return 0;
-}
-__initcall(smsc_superio_setup);
-
-static void __iomem *cayman_ioport_map(unsigned long port, unsigned int len)
-{
-	if (port < 0x400) {
-		extern unsigned long smsc_superio_virt;
-		return (void __iomem *)((port << 2) | smsc_superio_virt);
-	}
-
-	return (void __iomem *)port;
-}
-
-extern void init_cayman_irq(void);
-
-static struct sh_machine_vector mv_cayman __initmv = {
-	.mv_name		= "Hitachi Cayman",
-	.mv_nr_irqs		= 64,
-	.mv_ioport_map		= cayman_ioport_map,
-	.mv_init_irq		= init_cayman_irq,
-};
diff --git a/arch/sh/boards/dreamcast/irq.c b/arch/sh/boards/dreamcast/irq.c
deleted file mode 100644
index 9d0673a9092a..000000000000
--- a/arch/sh/boards/dreamcast/irq.c
+++ /dev/null
@@ -1,153 +0,0 @@
-/*
- * arch/sh/boards/dreamcast/irq.c
- *
- * Holly IRQ support for the Sega Dreamcast.
- *
- * Copyright (c) 2001, 2002 M. R. Brown <mrbrown@0xd6.org>
- *
- * This file is part of the LinuxDC project (www.linuxdc.org)
- * Released under the terms of the GNU GPL v2.0
- */
-
-#include <linux/irq.h>
-#include <asm/io.h>
-#include <asm/irq.h>
-#include <asm/dreamcast/sysasic.h>
-
-/* Dreamcast System ASIC Hardware Events -
-
-   The Dreamcast's System ASIC (a.k.a. Holly) is responsible for receiving
-   hardware events from system peripherals and triggering an SH7750 IRQ.
-   Hardware events can trigger IRQs 13, 11, or 9 depending on which bits are
-   set in the Event Mask Registers (EMRs).  When a hardware event is
-   triggered, it's corresponding bit in the Event Status Registers (ESRs)
-   is set, and that bit should be rewritten to the ESR to acknowledge that
-   event.
-
-   There are three 32-bit ESRs located at 0xa05f8900 - 0xa05f6908.  Event
-   types can be found in include/asm-sh/dreamcast/sysasic.h. There are three
-   groups of EMRs that parallel the ESRs.  Each EMR group corresponds to an
-   IRQ, so 0xa05f6910 - 0xa05f6918 triggers IRQ 13, 0xa05f6920 - 0xa05f6928
-   triggers IRQ 11, and 0xa05f6930 - 0xa05f6938 triggers IRQ 9.
-
-   In the kernel, these events are mapped to virtual IRQs so that drivers can
-   respond to them as they would a normal interrupt.  In order to keep this
-   mapping simple, the events are mapped as:
-
-   6900/6910 - Events  0-31, IRQ 13
-   6904/6924 - Events 32-63, IRQ 11
-   6908/6938 - Events 64-95, IRQ  9
-
-*/
-
-#define ESR_BASE 0x005f6900    /* Base event status register */
-#define EMR_BASE 0x005f6910    /* Base event mask register */
-
-/* Helps us determine the EMR group that this event belongs to: 0 = 0x6910,
-   1 = 0x6920, 2 = 0x6930; also determine the event offset */
-#define LEVEL(event) (((event) - HW_EVENT_IRQ_BASE) / 32)
-
-/* Return the hardware event's bit positon within the EMR/ESR */
-#define EVENT_BIT(event) (((event) - HW_EVENT_IRQ_BASE) & 31)
-
-/* For each of these *_irq routines, the IRQ passed in is the virtual IRQ
-   (logically mapped to the corresponding bit for the hardware event). */
-
-/* Disable the hardware event by masking its bit in its EMR */
-static inline void disable_systemasic_irq(unsigned int irq)
-{
-        __u32 emr = EMR_BASE + (LEVEL(irq) << 4) + (LEVEL(irq) << 2);
-        __u32 mask;
-
-        mask = inl(emr);
-        mask &= ~(1 << EVENT_BIT(irq));
-        outl(mask, emr);
-}
-
-/* Enable the hardware event by setting its bit in its EMR */
-static inline void enable_systemasic_irq(unsigned int irq)
-{
-        __u32 emr = EMR_BASE + (LEVEL(irq) << 4) + (LEVEL(irq) << 2);
-        __u32 mask;
-
-        mask = inl(emr);
-        mask |= (1 << EVENT_BIT(irq));
-        outl(mask, emr);
-}
-
-/* Acknowledge a hardware event by writing its bit back to its ESR */
-static void ack_systemasic_irq(unsigned int irq)
-{
-        __u32 esr = ESR_BASE + (LEVEL(irq) << 2);
-        disable_systemasic_irq(irq);
-        outl((1 << EVENT_BIT(irq)), esr);
-}
-
-/* After a IRQ has been ack'd and responded to, it needs to be renabled */
-static void end_systemasic_irq(unsigned int irq)
-{
-        if (!(irq_desc[irq].status & (IRQ_DISABLED|IRQ_INPROGRESS)))
-                enable_systemasic_irq(irq);
-}
-
-static unsigned int startup_systemasic_irq(unsigned int irq)
-{
-        enable_systemasic_irq(irq);
-
-        return 0;
-}
-
-static void shutdown_systemasic_irq(unsigned int irq)
-{
-        disable_systemasic_irq(irq);
-}
-
-struct hw_interrupt_type systemasic_int = {
-        .typename       = "System ASIC",
-        .startup        = startup_systemasic_irq,
-        .shutdown       = shutdown_systemasic_irq,
-        .enable         = enable_systemasic_irq,
-        .disable        = disable_systemasic_irq,
-        .ack            = ack_systemasic_irq,
-        .end            = end_systemasic_irq,
-};
-
-/*
- * Map the hardware event indicated by the processor IRQ to a virtual IRQ.
- */
-int systemasic_irq_demux(int irq)
-{
-        __u32 emr, esr, status, level;
-        __u32 j, bit;
-
-        switch (irq) {
-                case 13:
-                        level = 0;
-                        break;
-                case 11:
-                        level = 1;
-                        break;
-                case  9:
-                        level = 2;
-                        break;
-                default:
-                        return irq;
-        }
-        emr = EMR_BASE + (level << 4) + (level << 2);
-        esr = ESR_BASE + (level << 2);
-
-        /* Mask the ESR to filter any spurious, unwanted interrupts */
-        status = inl(esr);
-        status &= inl(emr);
-
-        /* Now scan and find the first set bit as the event to map */
-        for (bit = 1, j = 0; j < 32; bit <<= 1, j++) {
-                if (status & bit) {
-                        irq = HW_EVENT_IRQ_BASE + j + (level << 5);
-                        return irq;
-                }
-        }
-
-        /* Not reached */
-        return irq;
-}
diff --git a/arch/sh/boards/dreamcast/setup.c b/arch/sh/boards/dreamcast/setup.c
deleted file mode 100644
index 2581c8cd5df7..000000000000
--- a/arch/sh/boards/dreamcast/setup.c
+++ /dev/null
@@ -1,64 +0,0 @@
-/*
- * arch/sh/boards/dreamcast/setup.c
- *
- * Hardware support for the Sega Dreamcast.
- *
- * Copyright (c) 2001, 2002 M. R. Brown <mrbrown@linuxdc.org>
- * Copyright (c) 2002, 2003, 2004 Paul Mundt <lethal@linux-sh.org>
- *
- * This file is part of the LinuxDC project (www.linuxdc.org)
- *
- * Released under the terms of the GNU GPL v2.0.
- *
- * This file originally bore the message (with enclosed-$):
- *	Id: setup_dc.c,v 1.5 2001/05/24 05:09:16 mrbrown Exp
- *	SEGA Dreamcast support
- */
-
-#include <linux/sched.h>
-#include <linux/kernel.h>
-#include <linux/param.h>
-#include <linux/interrupt.h>
-#include <linux/init.h>
-#include <linux/irq.h>
-#include <linux/device.h>
-#include <asm/io.h>
-#include <asm/irq.h>
-#include <asm/rtc.h>
-#include <asm/machvec.h>
-#include <asm/mach/sysasic.h>
-
-extern struct hw_interrupt_type systemasic_int;
-extern void aica_time_init(void);
-extern int gapspci_init(void);
-extern int systemasic_irq_demux(int);
-
-static void __init dreamcast_setup(char **cmdline_p)
-{
-	int i;
-
-	/* Mask all hardware events */
-	/* XXX */
-
-	/* Acknowledge any previous events */
-	/* XXX */
-
-	__set_io_port_base(0xa0000000);
-
-	/* Assign all virtual IRQs to the System ASIC int. handler */
-	for (i = HW_EVENT_IRQ_BASE; i < HW_EVENT_IRQ_MAX; i++)
-		irq_desc[i].chip = &systemasic_int;
-
-	board_time_init = aica_time_init;
-
-#ifdef CONFIG_PCI
-	if (gapspci_init() < 0)
-		printk(KERN_WARNING "GAPSPCI was not detected.\n");
-#endif
-}
-
-static struct sh_machine_vector mv_dreamcast __initmv = {
-	.mv_name		= "Sega Dreamcast",
-	.mv_setup		= dreamcast_setup,
-	.mv_irq_demux		= systemasic_irq_demux,
-};
diff --git a/arch/sh/boards/hp6xx/setup.c b/arch/sh/boards/hp6xx/setup.c
deleted file mode 100644
index 2f414ac3c690..000000000000
--- a/arch/sh/boards/hp6xx/setup.c
+++ /dev/null
@@ -1,121 +0,0 @@
-/*
- * linux/arch/sh/boards/hp6xx/setup.c
- *
- * Copyright (C) 2002 Andriy Skulysh
- * Copyright (C) 2007 Kristoffer Ericson <Kristoffer_e1@hotmail.com>
- *
- * May be copied or modified under the terms of the GNU General Public
- * License.  See linux/COPYING for more information.
- *
- * Setup code for HP620/HP660/HP680/HP690 (internal peripherials only)
- */
-#include <linux/types.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <asm/hd64461.h>
-#include <asm/io.h>
-#include <asm/irq.h>
-#include <asm/hp6xx.h>
-#include <asm/cpu/dac.h>
-
-#define	SCPCR	0xa4000116
-#define	SCPDR	0xa4000136
-
-/* CF Slot */
-static struct resource cf_ide_resources[] = {
-	[0] = {
-		.start = 0x15000000 + 0x1f0,
-		.end   = 0x15000000 + 0x1f0 + 0x08 - 0x01,
-		.flags = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start = 0x15000000 + 0x1fe,
-		.end   = 0x15000000 + 0x1fe + 0x01,
-		.flags = IORESOURCE_MEM,
-	},
-	[2] = {
-		.start = 77,
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device cf_ide_device = {
-	.name		=  "pata_platform",
-	.id		=  -1,
-	.num_resources	= ARRAY_SIZE(cf_ide_resources),
-	.resource	= cf_ide_resources,
-};
-
-static struct platform_device jornadakbd_device = {
-	.name		= "jornada680_kbd",
-	.id		= -1,
-};
-
-static struct platform_device *hp6xx_devices[] __initdata = {
-	&cf_ide_device,
-	&jornadakbd_device,
-};
-
-static void __init hp6xx_init_irq(void)
-{
-	/* Gets touchscreen and powerbutton IRQ working */
-	plat_irq_setup_pins(IRQ_MODE_IRQ);
-}
-
-static int __init hp6xx_devices_setup(void)
-{
-	return platform_add_devices(hp6xx_devices, ARRAY_SIZE(hp6xx_devices));
-}
-
-static void __init hp6xx_setup(char **cmdline_p)
-{
-	u8 v8;
-	u16 v;
-
-	v = inw(HD64461_STBCR);
-	v |=	HD64461_STBCR_SURTST | HD64461_STBCR_SIRST	|
-		HD64461_STBCR_STM1ST | HD64461_STBCR_STM0ST	|
-		HD64461_STBCR_SAFEST | HD64461_STBCR_SPC0ST	|
-		HD64461_STBCR_SMIAST | HD64461_STBCR_SAFECKE_OST|
-		HD64461_STBCR_SAFECKE_IST;
-#ifndef CONFIG_HD64461_ENABLER
-	v |= HD64461_STBCR_SPC1ST;
-#endif
-	outw(v, HD64461_STBCR);
-	v = inw(HD64461_GPADR);
-	v |= HD64461_GPADR_SPEAKER | HD64461_GPADR_PCMCIA0;
-	outw(v, HD64461_GPADR);
-
-	outw(HD64461_PCCGCR_VCC0 | HD64461_PCCSCR_VCC1, HD64461_PCC0GCR);
-
-#ifndef CONFIG_HD64461_ENABLER
-	outw(HD64461_PCCGCR_VCC0 | HD64461_PCCSCR_VCC1, HD64461_PCC1GCR);
-#endif
-
-	sh_dac_output(0, DAC_SPEAKER_VOLUME);
-	sh_dac_disable(DAC_SPEAKER_VOLUME);
-	v8 = ctrl_inb(DACR);
-	v8 &= ~DACR_DAE;
-	ctrl_outb(v8,DACR);
-
-	v8 = ctrl_inb(SCPDR);
-	v8 |= SCPDR_TS_SCAN_X | SCPDR_TS_SCAN_Y;
-	v8 &= ~SCPDR_TS_SCAN_ENABLE;
-	ctrl_outb(v8, SCPDR);
-
-	v = ctrl_inw(SCPCR);
-	v &= ~SCPCR_TS_MASK;
-	v |= SCPCR_TS_ENABLE;
-	ctrl_outw(v, SCPCR);
-}
-device_initcall(hp6xx_devices_setup);
-
-static struct sh_machine_vector mv_hp6xx __initmv = {
-	.mv_name = "hp6xx",
-	.mv_setup = hp6xx_setup,
-	/* IRQ's : CPU(64) + CCHIP(16) + FREE_TO_USE(6) */
-	.mv_nr_irqs = HD64461_IRQBASE + HD64461_IRQ_NUM + 6,
-	.mv_irq_demux = hd64461_irq_demux,
-	/* Enable IRQ0 -> IRQ3 in IRQ_MODE */
-	.mv_init_irq = hp6xx_init_irq,
-};
diff --git a/arch/sh/boards/landisk/irq.c b/arch/sh/boards/landisk/irq.c
deleted file mode 100644
index 258649491d44..000000000000
--- a/arch/sh/boards/landisk/irq.c
+++ /dev/null
@@ -1,56 +0,0 @@
-/*
- * arch/sh/boards/landisk/irq.c
- *
- * I-O DATA Device, Inc. LANDISK Support
- *
- * Copyright (C) 2005-2007 kogiidena
- *
- * Copyright (C) 2001  Ian da Silva, Jeremy Siegel
- * Based largely on io_se.c.
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-#include <linux/init.h>
-#include <linux/irq.h>
-#include <linux/interrupt.h>
-#include <linux/io.h>
-#include <asm/landisk/iodata_landisk.h>
-
-static void disable_landisk_irq(unsigned int irq)
-{
-	unsigned char mask = 0xff ^ (0x01 << (irq - 5));
-
-	ctrl_outb(ctrl_inb(PA_IMASK) & mask, PA_IMASK);
-}
-
-static void enable_landisk_irq(unsigned int irq)
-{
-	unsigned char value = (0x01 << (irq - 5));
-
-	ctrl_outb(ctrl_inb(PA_IMASK) | value, PA_IMASK);
-}
-
-static struct irq_chip landisk_irq_chip __read_mostly = {
-	.name		= "LANDISK",
-	.mask		= disable_landisk_irq,
-	.unmask		= enable_landisk_irq,
-	.mask_ack	= disable_landisk_irq,
-};
-
-/*
- * Initialize IRQ setting
- */
-void __init init_landisk_IRQ(void)
-{
-	int i;
-
-	for (i = 5; i < 14; i++) {
-		disable_irq_nosync(i);
-		set_irq_chip_and_handler_name(i, &landisk_irq_chip,
-					      handle_level_irq, "level");
-		enable_landisk_irq(i);
-	}
-	ctrl_outb(0x00, PA_PWRINT_CLR);
-}
diff --git a/arch/sh/boards/landisk/psw.c b/arch/sh/boards/landisk/psw.c
deleted file mode 100644
index 5a9b70b5decb..000000000000
--- a/arch/sh/boards/landisk/psw.c
+++ /dev/null
@@ -1,143 +0,0 @@
-/*
- * arch/sh/boards/landisk/psw.c
- *
- * push switch support for LANDISK and USL-5P
- *
- * Copyright (C) 2006-2007  Paul Mundt
- * Copyright (C) 2007  kogiidena
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-#include <linux/io.h>
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/platform_device.h>
-#include <asm/landisk/iodata_landisk.h>
-#include <asm/push-switch.h>
-
-static irqreturn_t psw_irq_handler(int irq, void *arg)
-{
-	struct platform_device *pdev = arg;
-	struct push_switch *psw = platform_get_drvdata(pdev);
-	struct push_switch_platform_info *psw_info = pdev->dev.platform_data;
-	unsigned int sw_value;
-	int ret = 0;
-
-	sw_value = (0x0ff & (~ctrl_inb(PA_STATUS)));
-
-	/* Nothing to do if there's no state change */
-	if (psw->state) {
-		ret = 1;
-		goto out;
-	}
-
-	/* Figure out who raised it */
-	if (sw_value & (1 << psw_info->bit)) {
-		psw->state = 1;
-		mod_timer(&psw->debounce, jiffies + 50);
-		ret = 1;
-	}
-
-out:
-	/* Clear the switch IRQs */
-	ctrl_outb(0x00, PA_PWRINT_CLR);
-
-	return IRQ_RETVAL(ret);
-}
-
-static struct resource psw_power_resources[] = {
-	[0] = {
-		.start = IRQ_POWER,
-		.flags = IORESOURCE_IRQ,
-       },
-};
-
-static struct resource psw_usl5p_resources[] = {
-	[0] = {
-		.start = IRQ_BUTTON,
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-static struct push_switch_platform_info psw_power_platform_data = {
-	.name		= "psw_power",
-	.bit		= 4,
-	.irq_flags	= IRQF_SHARED,
-	.irq_handler	= psw_irq_handler,
-};
-
-static struct push_switch_platform_info psw1_platform_data = {
-	.name		= "psw1",
-	.bit		= 0,
-	.irq_flags	= IRQF_SHARED,
-	.irq_handler	= psw_irq_handler,
-};
-
-static struct push_switch_platform_info psw2_platform_data = {
-	.name		= "psw2",
-	.bit		= 2,
-	.irq_flags	= IRQF_SHARED,
-	.irq_handler	= psw_irq_handler,
-};
-
-static struct push_switch_platform_info psw3_platform_data = {
-	.name		= "psw3",
-	.bit		= 1,
-	.irq_flags	= IRQF_SHARED,
-	.irq_handler	= psw_irq_handler,
-};
-
-static struct platform_device psw_power_switch_device = {
-	.name		= "push-switch",
-	.id		= 0,
-	.num_resources	= ARRAY_SIZE(psw_power_resources),
-	.resource	= psw_power_resources,
-	.dev		= {
-		.platform_data = &psw_power_platform_data,
-	},
-};
-
-static struct platform_device psw1_switch_device = {
-	.name		= "push-switch",
-	.id		= 1,
-	.num_resources	= ARRAY_SIZE(psw_usl5p_resources),
-	.resource	= psw_usl5p_resources,
-	.dev		= {
-		.platform_data = &psw1_platform_data,
-	},
-};
-
-static struct platform_device psw2_switch_device = {
-	.name		= "push-switch",
-	.id		= 2,
-	.num_resources	= ARRAY_SIZE(psw_usl5p_resources),
-	.resource	= psw_usl5p_resources,
-	.dev		= {
-		.platform_data = &psw2_platform_data,
-	},
-};
-
-static struct platform_device psw3_switch_device = {
-	.name		= "push-switch",
-	.id		= 3,
-	.num_resources	= ARRAY_SIZE(psw_usl5p_resources),
-	.resource	= psw_usl5p_resources,
-	.dev = {
-		.platform_data = &psw3_platform_data,
-	},
-};
-
-static struct platform_device *psw_devices[] = {
-	&psw_power_switch_device,
-	&psw1_switch_device,
-	&psw2_switch_device,
-	&psw3_switch_device,
-};
-
-static int __init psw_init(void)
-{
-	return platform_add_devices(psw_devices, ARRAY_SIZE(psw_devices));
-}
-module_init(psw_init);
diff --git a/arch/sh/boards/landisk/setup.c b/arch/sh/boards/landisk/setup.c
deleted file mode 100644
index 2b708ec72558..000000000000
--- a/arch/sh/boards/landisk/setup.c
+++ /dev/null
@@ -1,105 +0,0 @@
-/*
- * arch/sh/boards/landisk/setup.c
- *
- * I-O DATA Device, Inc. LANDISK Support.
- *
- * Copyright (C) 2000 Kazumoto Kojima
- * Copyright (C) 2002 Paul Mundt
- * Copylight (C) 2002 Atom Create Engineering Co., Ltd.
- * Copyright (C) 2005-2007 kogiidena
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/ata_platform.h>
-#include <linux/pm.h>
-#include <linux/mm.h>
-#include <asm/machvec.h>
-#include <asm/landisk/iodata_landisk.h>
-#include <asm/io.h>
-
-void init_landisk_IRQ(void);
-
-static void landisk_power_off(void)
-{
-        ctrl_outb(0x01, PA_SHUTDOWN);
-}
-
-static struct resource cf_ide_resources[3];
-
-static struct pata_platform_info pata_info = {
-	.ioport_shift	= 1,
-};
-
-static struct platform_device cf_ide_device = {
-	.name		= "pata_platform",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(cf_ide_resources),
-	.resource	= cf_ide_resources,
-	.dev		= {
-		.platform_data = &pata_info,
-	},
-};
-
-static struct platform_device rtc_device = {
-	.name		= "rs5c313",
-	.id		= -1,
-};
-
-static struct platform_device *landisk_devices[] __initdata = {
-	&cf_ide_device,
-	&rtc_device,
-};
-
-static int __init landisk_devices_setup(void)
-{
-	pgprot_t prot;
-	unsigned long paddrbase;
-	void *cf_ide_base;
-
-	/* open I/O area window */
-	paddrbase = virt_to_phys((void *)PA_AREA5_IO);
-	prot = PAGE_KERNEL_PCC(1, _PAGE_PCC_IO16);
-	cf_ide_base = p3_ioremap(paddrbase, PAGE_SIZE, prot.pgprot);
-	if (!cf_ide_base) {
-		printk("allocate_cf_area : can't open CF I/O window!\n");
-		return -ENOMEM;
-	}
-
-	/* IDE cmd address : 0x1f0-0x1f7 and 0x3f6 */
-	cf_ide_resources[0].start = (unsigned long)cf_ide_base + 0x40;
-	cf_ide_resources[0].end   = (unsigned long)cf_ide_base + 0x40 + 0x0f;
-	cf_ide_resources[0].flags = IORESOURCE_IO;
-	cf_ide_resources[1].start = (unsigned long)cf_ide_base + 0x2c;
-	cf_ide_resources[1].end   = (unsigned long)cf_ide_base + 0x2c + 0x03;
-	cf_ide_resources[1].flags = IORESOURCE_IO;
-	cf_ide_resources[2].start = IRQ_FATA;
-	cf_ide_resources[2].flags = IORESOURCE_IRQ;
-
-	return platform_add_devices(landisk_devices,
-				    ARRAY_SIZE(landisk_devices));
-}
-
-__initcall(landisk_devices_setup);
-
-static void __init landisk_setup(char **cmdline_p)
-{
-        /* LED ON */
-	ctrl_outb(ctrl_inb(PA_LED) | 0x03, PA_LED);
-
-	printk(KERN_INFO "I-O DATA DEVICE, INC. \"LANDISK Series\" support.\n");
-	pm_power_off = landisk_power_off;
-}
-
-/*
- * The Machine Vector
- */
-static struct sh_machine_vector mv_landisk __initmv = {
-	.mv_name = "LANDISK",
-	.mv_nr_irqs = 72,
-	.mv_setup = landisk_setup,
-	.mv_init_irq = init_landisk_IRQ,
-};
diff --git a/arch/sh/boards/cayman/Makefile b/arch/sh/boards/mach-cayman/Makefile
index 489a8f867368..489a8f867368 100644
--- a/arch/sh/boards/cayman/Makefile
+++ b/arch/sh/boards/mach-cayman/Makefile
diff --git a/arch/sh/boards/mach-cayman/irq.c b/arch/sh/boards/mach-cayman/irq.c
new file mode 100644
index 000000000000..ceb37ae92c70
--- /dev/null
+++ b/arch/sh/boards/mach-cayman/irq.c
@@ -0,0 +1,197 @@
+/*
+ * arch/sh/mach-cayman/irq.c - SH-5 Cayman Interrupt Support
+ *
+ * This file handles the board specific parts of the Cayman interrupt system
+ *
+ * Copyright (C) 2002 Stuart Menefy
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/io.h>
+#include <linux/irq.h>
+#include <linux/interrupt.h>
+#include <linux/signal.h>
+#include <cpu/irq.h>
+#include <asm/page.h>
+
+/* Setup for the SMSC FDC37C935 / LAN91C100FD */
+#define SMSC_IRQ         IRQ_IRL1
+
+/* Setup for PCI Bus 2, which transmits interrupts via the EPLD */
+#define PCI2_IRQ         IRQ_IRL3
+
+unsigned long epld_virt;
+
+#define EPLD_BASE        0x04002000
+#define EPLD_STATUS_BASE (epld_virt + 0x10)
+#define EPLD_MASK_BASE   (epld_virt + 0x20)
+
+/* Note the SMSC SuperIO chip and SMSC LAN chip interrupts are all muxed onto
+   the same SH-5 interrupt */
+
+static irqreturn_t cayman_interrupt_smsc(int irq, void *dev_id)
+{
+        printk(KERN_INFO "CAYMAN: spurious SMSC interrupt\n");
+	return IRQ_NONE;
+}
+
+static irqreturn_t cayman_interrupt_pci2(int irq, void *dev_id)
+{
+        printk(KERN_INFO "CAYMAN: spurious PCI interrupt, IRQ %d\n", irq);
+	return IRQ_NONE;
+}
+
+static struct irqaction cayman_action_smsc = {
+	.name		= "Cayman SMSC Mux",
+	.handler	= cayman_interrupt_smsc,
+	.flags		= IRQF_DISABLED,
+};
+
+static struct irqaction cayman_action_pci2 = {
+	.name		= "Cayman PCI2 Mux",
+	.handler	= cayman_interrupt_pci2,
+	.flags		= IRQF_DISABLED,
+};
+
+static void enable_cayman_irq(unsigned int irq)
+{
+	unsigned long flags;
+	unsigned long mask;
+	unsigned int reg;
+	unsigned char bit;
+
+	irq -= START_EXT_IRQS;
+	reg = EPLD_MASK_BASE + ((irq / 8) << 2);
+	bit = 1<<(irq % 8);
+	local_irq_save(flags);
+	mask = ctrl_inl(reg);
+	mask |= bit;
+	ctrl_outl(mask, reg);
+	local_irq_restore(flags);
+}
+
+void disable_cayman_irq(unsigned int irq)
+{
+	unsigned long flags;
+	unsigned long mask;
+	unsigned int reg;
+	unsigned char bit;
+
+	irq -= START_EXT_IRQS;
+	reg = EPLD_MASK_BASE + ((irq / 8) << 2);
+	bit = 1<<(irq % 8);
+	local_irq_save(flags);
+	mask = ctrl_inl(reg);
+	mask &= ~bit;
+	ctrl_outl(mask, reg);
+	local_irq_restore(flags);
+}
+
+static void ack_cayman_irq(unsigned int irq)
+{
+	disable_cayman_irq(irq);
+}
+
+static void end_cayman_irq(unsigned int irq)
+{
+	if (!(irq_desc[irq].status & (IRQ_DISABLED|IRQ_INPROGRESS)))
+		enable_cayman_irq(irq);
+}
+
+static unsigned int startup_cayman_irq(unsigned int irq)
+{
+	enable_cayman_irq(irq);
+	return 0; /* never anything pending */
+}
+
+static void shutdown_cayman_irq(unsigned int irq)
+{
+	disable_cayman_irq(irq);
+}
+
+struct hw_interrupt_type cayman_irq_type = {
+	.typename	= "Cayman-IRQ",
+	.startup	= startup_cayman_irq,
+	.shutdown	= shutdown_cayman_irq,
+	.enable		= enable_cayman_irq,
+	.disable	= disable_cayman_irq,
+	.ack		= ack_cayman_irq,
+	.end		= end_cayman_irq,
+};
+
+int cayman_irq_demux(int evt)
+{
+	int irq = intc_evt_to_irq[evt];
+
+	if (irq == SMSC_IRQ) {
+		unsigned long status;
+		int i;
+
+		status = ctrl_inl(EPLD_STATUS_BASE) &
+			 ctrl_inl(EPLD_MASK_BASE) & 0xff;
+		if (status == 0) {
+			irq = -1;
+		} else {
+			for (i=0; i<8; i++) {
+				if (status & (1<<i))
+					break;
+			}
+			irq = START_EXT_IRQS + i;
+		}
+	}
+
+	if (irq == PCI2_IRQ) {
+		unsigned long status;
+		int i;
+
+		status = ctrl_inl(EPLD_STATUS_BASE + 3 * sizeof(u32)) &
+			 ctrl_inl(EPLD_MASK_BASE + 3 * sizeof(u32)) & 0xff;
+		if (status == 0) {
+			irq = -1;
+		} else {
+			for (i=0; i<8; i++) {
+				if (status & (1<<i))
+					break;
+			}
+			irq = START_EXT_IRQS + (3 * 8) + i;
+		}
+	}
+
+	return irq;
+}
+
+#if defined(CONFIG_PROC_FS) && defined(CONFIG_SYSCTL)
+int cayman_irq_describe(char* p, int irq)
+{
+	if (irq < NR_INTC_IRQS) {
+		return intc_irq_describe(p, irq);
+	} else if (irq < NR_INTC_IRQS + 8) {
+		return sprintf(p, "(SMSC %d)", irq - NR_INTC_IRQS);
+	} else if ((irq >= NR_INTC_IRQS + 24) && (irq < NR_INTC_IRQS + 32)) {
+		return sprintf(p, "(PCI2 %d)", irq - (NR_INTC_IRQS + 24));
+	}
+
+	return 0;
+}
+#endif
+
+void init_cayman_irq(void)
+{
+	int i;
+
+	epld_virt = onchip_remap(EPLD_BASE, 1024, "EPLD");
+	if (!epld_virt) {
+		printk(KERN_ERR "Cayman IRQ: Unable to remap EPLD\n");
+		return;
+	}
+
+	for (i=0; i<NR_EXT_IRQS; i++) {
+		irq_desc[START_EXT_IRQS + i].chip = &cayman_irq_type;
+	}
+
+	/* Setup the SMSC interrupt */
+	setup_irq(SMSC_IRQ, &cayman_action_smsc);
+	setup_irq(PCI2_IRQ, &cayman_action_pci2);
+}
diff --git a/arch/sh/boards/cayman/led.c b/arch/sh/boards/mach-cayman/led.c
index a808eac4ecd6..a808eac4ecd6 100644
--- a/arch/sh/boards/cayman/led.c
+++ b/arch/sh/boards/mach-cayman/led.c
diff --git a/arch/sh/boards/mach-cayman/setup.c b/arch/sh/boards/mach-cayman/setup.c
new file mode 100644
index 000000000000..e7f9cc5f2ff1
--- /dev/null
+++ b/arch/sh/boards/mach-cayman/setup.c
@@ -0,0 +1,187 @@
+/*
+ * arch/sh/mach-cayman/setup.c
+ *
+ * SH5 Cayman support
+ *
+ * Copyright (C) 2002  David J. Mckay & Benedict Gaster
+ * Copyright (C) 2003 - 2007  Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <cpu/irq.h>
+
+/*
+ * Platform Dependent Interrupt Priorities.
+ */
+
+/* Using defaults defined in irq.h */
+#define	RES NO_PRIORITY		/* Disabled */
+#define IR0 IRL0_PRIORITY	/* IRLs */
+#define IR1 IRL1_PRIORITY
+#define IR2 IRL2_PRIORITY
+#define IR3 IRL3_PRIORITY
+#define PCA INTA_PRIORITY	/* PCI Ints */
+#define PCB INTB_PRIORITY
+#define PCC INTC_PRIORITY
+#define PCD INTD_PRIORITY
+#define SER TOP_PRIORITY
+#define ERR TOP_PRIORITY
+#define PW0 TOP_PRIORITY
+#define PW1 TOP_PRIORITY
+#define PW2 TOP_PRIORITY
+#define PW3 TOP_PRIORITY
+#define DM0 NO_PRIORITY		/* DMA Ints */
+#define DM1 NO_PRIORITY
+#define DM2 NO_PRIORITY
+#define DM3 NO_PRIORITY
+#define DAE NO_PRIORITY
+#define TU0 TIMER_PRIORITY	/* TMU Ints */
+#define TU1 NO_PRIORITY
+#define TU2 NO_PRIORITY
+#define TI2 NO_PRIORITY
+#define ATI NO_PRIORITY		/* RTC Ints */
+#define PRI NO_PRIORITY
+#define CUI RTC_PRIORITY
+#define ERI SCIF_PRIORITY	/* SCIF Ints */
+#define RXI SCIF_PRIORITY
+#define BRI SCIF_PRIORITY
+#define TXI SCIF_PRIORITY
+#define ITI TOP_PRIORITY	/* WDT Ints */
+
+/* Setup for the SMSC FDC37C935 */
+#define SMSC_SUPERIO_BASE	0x04000000
+#define SMSC_CONFIG_PORT_ADDR	0x3f0
+#define SMSC_INDEX_PORT_ADDR	SMSC_CONFIG_PORT_ADDR
+#define SMSC_DATA_PORT_ADDR	0x3f1
+
+#define SMSC_ENTER_CONFIG_KEY	0x55
+#define SMSC_EXIT_CONFIG_KEY	0xaa
+
+#define SMCS_LOGICAL_DEV_INDEX	0x07
+#define SMSC_DEVICE_ID_INDEX	0x20
+#define SMSC_DEVICE_REV_INDEX	0x21
+#define SMSC_ACTIVATE_INDEX	0x30
+#define SMSC_PRIMARY_BASE_INDEX  0x60
+#define SMSC_SECONDARY_BASE_INDEX 0x62
+#define SMSC_PRIMARY_INT_INDEX	0x70
+#define SMSC_SECONDARY_INT_INDEX 0x72
+
+#define SMSC_IDE1_DEVICE	1
+#define SMSC_KEYBOARD_DEVICE	7
+#define SMSC_CONFIG_REGISTERS	8
+
+#define SMSC_SUPERIO_READ_INDEXED(index) ({ \
+	outb((index), SMSC_INDEX_PORT_ADDR); \
+	inb(SMSC_DATA_PORT_ADDR); })
+#define SMSC_SUPERIO_WRITE_INDEXED(val, index) ({ \
+	outb((index), SMSC_INDEX_PORT_ADDR); \
+	outb((val),   SMSC_DATA_PORT_ADDR); })
+
+#define IDE1_PRIMARY_BASE	0x01f0
+#define IDE1_SECONDARY_BASE	0x03f6
+
+unsigned long smsc_superio_virt;
+
+int platform_int_priority[NR_INTC_IRQS] = {
+	IR0, IR1, IR2, IR3, PCA, PCB, PCC, PCD,	/* IRQ  0- 7 */
+	RES, RES, RES, RES, SER, ERR, PW3, PW2,	/* IRQ  8-15 */
+	PW1, PW0, DM0, DM1, DM2, DM3, DAE, RES,	/* IRQ 16-23 */
+	RES, RES, RES, RES, RES, RES, RES, RES,	/* IRQ 24-31 */
+	TU0, TU1, TU2, TI2, ATI, PRI, CUI, ERI,	/* IRQ 32-39 */
+	RXI, BRI, TXI, RES, RES, RES, RES, RES,	/* IRQ 40-47 */
+	RES, RES, RES, RES, RES, RES, RES, RES,	/* IRQ 48-55 */
+	RES, RES, RES, RES, RES, RES, RES, ITI,	/* IRQ 56-63 */
+};
+
+static int __init smsc_superio_setup(void)
+{
+	unsigned char devid, devrev;
+
+	smsc_superio_virt = onchip_remap(SMSC_SUPERIO_BASE, 1024, "SMSC SuperIO");
+	if (!smsc_superio_virt) {
+		panic("Unable to remap SMSC SuperIO\n");
+	}
+
+	/* Initially the chip is in run state */
+	/* Put it into configuration state */
+	outb(SMSC_ENTER_CONFIG_KEY, SMSC_CONFIG_PORT_ADDR);
+	outb(SMSC_ENTER_CONFIG_KEY, SMSC_CONFIG_PORT_ADDR);
+
+	/* Read device ID info */
+	devid = SMSC_SUPERIO_READ_INDEXED(SMSC_DEVICE_ID_INDEX);
+	devrev = SMSC_SUPERIO_READ_INDEXED(SMSC_DEVICE_REV_INDEX);
+	printk("SMSC SuperIO devid %02x rev %02x\n", devid, devrev);
+
+	/* Select the keyboard device */
+	SMSC_SUPERIO_WRITE_INDEXED(SMSC_KEYBOARD_DEVICE, SMCS_LOGICAL_DEV_INDEX);
+
+	/* enable it */
+	SMSC_SUPERIO_WRITE_INDEXED(1, SMSC_ACTIVATE_INDEX);
+
+	/* Select the interrupts */
+	/* On a PC keyboard is IRQ1, mouse is IRQ12 */
+	SMSC_SUPERIO_WRITE_INDEXED(1, SMSC_PRIMARY_INT_INDEX);
+	SMSC_SUPERIO_WRITE_INDEXED(12, SMSC_SECONDARY_INT_INDEX);
+
+#ifdef CONFIG_IDE
+	/*
+	 * Only IDE1 exists on the Cayman
+	 */
+
+	/* Power it on */
+	SMSC_SUPERIO_WRITE_INDEXED(1 << SMSC_IDE1_DEVICE, 0x22);
+
+	SMSC_SUPERIO_WRITE_INDEXED(SMSC_IDE1_DEVICE, SMCS_LOGICAL_DEV_INDEX);
+	SMSC_SUPERIO_WRITE_INDEXED(1, SMSC_ACTIVATE_INDEX);
+
+	SMSC_SUPERIO_WRITE_INDEXED(IDE1_PRIMARY_BASE >> 8,
+				   SMSC_PRIMARY_BASE_INDEX + 0);
+	SMSC_SUPERIO_WRITE_INDEXED(IDE1_PRIMARY_BASE & 0xff,
+				   SMSC_PRIMARY_BASE_INDEX + 1);
+
+	SMSC_SUPERIO_WRITE_INDEXED(IDE1_SECONDARY_BASE >> 8,
+				   SMSC_SECONDARY_BASE_INDEX + 0);
+	SMSC_SUPERIO_WRITE_INDEXED(IDE1_SECONDARY_BASE & 0xff,
+				   SMSC_SECONDARY_BASE_INDEX + 1);
+
+	SMSC_SUPERIO_WRITE_INDEXED(14, SMSC_PRIMARY_INT_INDEX);
+
+	SMSC_SUPERIO_WRITE_INDEXED(SMSC_CONFIG_REGISTERS,
+				   SMCS_LOGICAL_DEV_INDEX);
+
+	SMSC_SUPERIO_WRITE_INDEXED(0x00, 0xc2); /* GP42 = nIDE1_OE */
+	SMSC_SUPERIO_WRITE_INDEXED(0x01, 0xc5); /* GP45 = IDE1_IRQ */
+	SMSC_SUPERIO_WRITE_INDEXED(0x00, 0xc6); /* GP46 = nIOROP */
+	SMSC_SUPERIO_WRITE_INDEXED(0x00, 0xc7); /* GP47 = nIOWOP */
+#endif
+
+	/* Exit the configuration state */
+	outb(SMSC_EXIT_CONFIG_KEY, SMSC_CONFIG_PORT_ADDR);
+
+	return 0;
+}
+__initcall(smsc_superio_setup);
+
+static void __iomem *cayman_ioport_map(unsigned long port, unsigned int len)
+{
+	if (port < 0x400) {
+		extern unsigned long smsc_superio_virt;
+		return (void __iomem *)((port << 2) | smsc_superio_virt);
+	}
+
+	return (void __iomem *)port;
+}
+
+extern void init_cayman_irq(void);
+
+static struct sh_machine_vector mv_cayman __initmv = {
+	.mv_name		= "Hitachi Cayman",
+	.mv_nr_irqs		= 64,
+	.mv_ioport_map		= cayman_ioport_map,
+	.mv_init_irq		= init_cayman_irq,
+};
diff --git a/arch/sh/boards/dreamcast/Makefile b/arch/sh/boards/mach-dreamcast/Makefile
index 7b97546c7e5f..7b97546c7e5f 100644
--- a/arch/sh/boards/dreamcast/Makefile
+++ b/arch/sh/boards/mach-dreamcast/Makefile
diff --git a/arch/sh/boards/mach-dreamcast/irq.c b/arch/sh/boards/mach-dreamcast/irq.c
new file mode 100644
index 000000000000..67bdc33dd411
--- /dev/null
+++ b/arch/sh/boards/mach-dreamcast/irq.c
@@ -0,0 +1,153 @@
+/*
+ * arch/sh/boards/dreamcast/irq.c
+ *
+ * Holly IRQ support for the Sega Dreamcast.
+ *
+ * Copyright (c) 2001, 2002 M. R. Brown <mrbrown@0xd6.org>
+ *
+ * This file is part of the LinuxDC project (www.linuxdc.org)
+ * Released under the terms of the GNU GPL v2.0
+ */
+
+#include <linux/irq.h>
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <mach/sysasic.h>
+
+/* Dreamcast System ASIC Hardware Events -
+
+   The Dreamcast's System ASIC (a.k.a. Holly) is responsible for receiving
+   hardware events from system peripherals and triggering an SH7750 IRQ.
+   Hardware events can trigger IRQs 13, 11, or 9 depending on which bits are
+   set in the Event Mask Registers (EMRs).  When a hardware event is
+   triggered, it's corresponding bit in the Event Status Registers (ESRs)
+   is set, and that bit should be rewritten to the ESR to acknowledge that
+   event.
+
+   There are three 32-bit ESRs located at 0xa05f8900 - 0xa05f6908.  Event
+   types can be found in include/asm-sh/dreamcast/sysasic.h. There are three
+   groups of EMRs that parallel the ESRs.  Each EMR group corresponds to an
+   IRQ, so 0xa05f6910 - 0xa05f6918 triggers IRQ 13, 0xa05f6920 - 0xa05f6928
+   triggers IRQ 11, and 0xa05f6930 - 0xa05f6938 triggers IRQ 9.
+
+   In the kernel, these events are mapped to virtual IRQs so that drivers can
+   respond to them as they would a normal interrupt.  In order to keep this
+   mapping simple, the events are mapped as:
+
+   6900/6910 - Events  0-31, IRQ 13
+   6904/6924 - Events 32-63, IRQ 11
+   6908/6938 - Events 64-95, IRQ  9
+
+*/
+
+#define ESR_BASE 0x005f6900    /* Base event status register */
+#define EMR_BASE 0x005f6910    /* Base event mask register */
+
+/* Helps us determine the EMR group that this event belongs to: 0 = 0x6910,
+   1 = 0x6920, 2 = 0x6930; also determine the event offset */
+#define LEVEL(event) (((event) - HW_EVENT_IRQ_BASE) / 32)
+
+/* Return the hardware event's bit positon within the EMR/ESR */
+#define EVENT_BIT(event) (((event) - HW_EVENT_IRQ_BASE) & 31)
+
+/* For each of these *_irq routines, the IRQ passed in is the virtual IRQ
+   (logically mapped to the corresponding bit for the hardware event). */
+
+/* Disable the hardware event by masking its bit in its EMR */
+static inline void disable_systemasic_irq(unsigned int irq)
+{
+        __u32 emr = EMR_BASE + (LEVEL(irq) << 4) + (LEVEL(irq) << 2);
+        __u32 mask;
+
+        mask = inl(emr);
+        mask &= ~(1 << EVENT_BIT(irq));
+        outl(mask, emr);
+}
+
+/* Enable the hardware event by setting its bit in its EMR */
+static inline void enable_systemasic_irq(unsigned int irq)
+{
+        __u32 emr = EMR_BASE + (LEVEL(irq) << 4) + (LEVEL(irq) << 2);
+        __u32 mask;
+
+        mask = inl(emr);
+        mask |= (1 << EVENT_BIT(irq));
+        outl(mask, emr);
+}
+
+/* Acknowledge a hardware event by writing its bit back to its ESR */
+static void ack_systemasic_irq(unsigned int irq)
+{
+        __u32 esr = ESR_BASE + (LEVEL(irq) << 2);
+        disable_systemasic_irq(irq);
+        outl((1 << EVENT_BIT(irq)), esr);
+}
+
+/* After a IRQ has been ack'd and responded to, it needs to be renabled */
+static void end_systemasic_irq(unsigned int irq)
+{
+        if (!(irq_desc[irq].status & (IRQ_DISABLED|IRQ_INPROGRESS)))
+                enable_systemasic_irq(irq);
+}
+
+static unsigned int startup_systemasic_irq(unsigned int irq)
+{
+        enable_systemasic_irq(irq);
+
+        return 0;
+}
+
+static void shutdown_systemasic_irq(unsigned int irq)
+{
+        disable_systemasic_irq(irq);
+}
+
+struct hw_interrupt_type systemasic_int = {
+        .typename       = "System ASIC",
+        .startup        = startup_systemasic_irq,
+        .shutdown       = shutdown_systemasic_irq,
+        .enable         = enable_systemasic_irq,
+        .disable        = disable_systemasic_irq,
+        .ack            = ack_systemasic_irq,
+        .end            = end_systemasic_irq,
+};
+
+/*
+ * Map the hardware event indicated by the processor IRQ to a virtual IRQ.
+ */
+int systemasic_irq_demux(int irq)
+{
+        __u32 emr, esr, status, level;
+        __u32 j, bit;
+
+        switch (irq) {
+                case 13:
+                        level = 0;
+                        break;
+                case 11:
+                        level = 1;
+                        break;
+                case  9:
+                        level = 2;
+                        break;
+                default:
+                        return irq;
+        }
+        emr = EMR_BASE + (level << 4) + (level << 2);
+        esr = ESR_BASE + (level << 2);
+
+        /* Mask the ESR to filter any spurious, unwanted interrupts */
+        status = inl(esr);
+        status &= inl(emr);
+
+        /* Now scan and find the first set bit as the event to map */
+        for (bit = 1, j = 0; j < 32; bit <<= 1, j++) {
+                if (status & bit) {
+                        irq = HW_EVENT_IRQ_BASE + j + (level << 5);
+                        return irq;
+                }
+        }
+
+        /* Not reached */
+        return irq;
+}
diff --git a/arch/sh/boards/dreamcast/rtc.c b/arch/sh/boards/mach-dreamcast/rtc.c
index b3a876a3b859..a7433685798d 100644
--- a/arch/sh/boards/dreamcast/rtc.c
+++ b/arch/sh/boards/mach-dreamcast/rtc.c
@@ -30,7 +30,7 @@
  *
  * Grabs the current RTC seconds counter and adjusts it to the Unix Epoch.
  */
-void aica_rtc_gettimeofday(struct timespec *ts)
+static void aica_rtc_gettimeofday(struct timespec *ts)
 {
 	unsigned long val1, val2;
 
@@ -54,7 +54,7 @@ void aica_rtc_gettimeofday(struct timespec *ts)
  *
  * Adjusts the given @tv to the AICA Epoch and sets the RTC seconds counter.
  */
-int aica_rtc_settimeofday(const time_t secs)
+static int aica_rtc_settimeofday(const time_t secs)
 {
 	unsigned long val1, val2;
 	unsigned long adj = secs + TWENTY_YEARS;
diff --git a/arch/sh/boards/mach-dreamcast/setup.c b/arch/sh/boards/mach-dreamcast/setup.c
new file mode 100644
index 000000000000..7d944fc75e93
--- /dev/null
+++ b/arch/sh/boards/mach-dreamcast/setup.c
@@ -0,0 +1,64 @@
+/*
+ * arch/sh/boards/dreamcast/setup.c
+ *
+ * Hardware support for the Sega Dreamcast.
+ *
+ * Copyright (c) 2001, 2002 M. R. Brown <mrbrown@linuxdc.org>
+ * Copyright (c) 2002, 2003, 2004 Paul Mundt <lethal@linux-sh.org>
+ *
+ * This file is part of the LinuxDC project (www.linuxdc.org)
+ *
+ * Released under the terms of the GNU GPL v2.0.
+ *
+ * This file originally bore the message (with enclosed-$):
+ *	Id: setup_dc.c,v 1.5 2001/05/24 05:09:16 mrbrown Exp
+ *	SEGA Dreamcast support
+ */
+
+#include <linux/sched.h>
+#include <linux/kernel.h>
+#include <linux/param.h>
+#include <linux/interrupt.h>
+#include <linux/init.h>
+#include <linux/irq.h>
+#include <linux/device.h>
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <asm/rtc.h>
+#include <asm/machvec.h>
+#include <mach/sysasic.h>
+
+extern struct hw_interrupt_type systemasic_int;
+extern void aica_time_init(void);
+extern int gapspci_init(void);
+extern int systemasic_irq_demux(int);
+
+static void __init dreamcast_setup(char **cmdline_p)
+{
+	int i;
+
+	/* Mask all hardware events */
+	/* XXX */
+
+	/* Acknowledge any previous events */
+	/* XXX */
+
+	__set_io_port_base(0xa0000000);
+
+	/* Assign all virtual IRQs to the System ASIC int. handler */
+	for (i = HW_EVENT_IRQ_BASE; i < HW_EVENT_IRQ_MAX; i++)
+		irq_desc[i].chip = &systemasic_int;
+
+	board_time_init = aica_time_init;
+
+#ifdef CONFIG_PCI
+	if (gapspci_init() < 0)
+		printk(KERN_WARNING "GAPSPCI was not detected.\n");
+#endif
+}
+
+static struct sh_machine_vector mv_dreamcast __initmv = {
+	.mv_name		= "Sega Dreamcast",
+	.mv_setup		= dreamcast_setup,
+	.mv_irq_demux		= systemasic_irq_demux,
+};
diff --git a/arch/sh/boards/renesas/edosk7705/Makefile b/arch/sh/boards/mach-edosk7705/Makefile
index 14bdd531f116..14bdd531f116 100644
--- a/arch/sh/boards/renesas/edosk7705/Makefile
+++ b/arch/sh/boards/mach-edosk7705/Makefile
diff --git a/arch/sh/boards/renesas/edosk7705/io.c b/arch/sh/boards/mach-edosk7705/io.c
index 541cea2a652f..541cea2a652f 100644
--- a/arch/sh/boards/renesas/edosk7705/io.c
+++ b/arch/sh/boards/mach-edosk7705/io.c
diff --git a/arch/sh/boards/renesas/edosk7705/setup.c b/arch/sh/boards/mach-edosk7705/setup.c
index f076c45308dd..f076c45308dd 100644
--- a/arch/sh/boards/renesas/edosk7705/setup.c
+++ b/arch/sh/boards/mach-edosk7705/setup.c
diff --git a/arch/sh/boards/renesas/r7780rp/Kconfig b/arch/sh/boards/mach-highlander/Kconfig
index fc8f28e04ba3..fc8f28e04ba3 100644
--- a/arch/sh/boards/renesas/r7780rp/Kconfig
+++ b/arch/sh/boards/mach-highlander/Kconfig
diff --git a/arch/sh/boards/renesas/r7780rp/Makefile b/arch/sh/boards/mach-highlander/Makefile
index 20a10080b11f..20a10080b11f 100644
--- a/arch/sh/boards/renesas/r7780rp/Makefile
+++ b/arch/sh/boards/mach-highlander/Makefile
diff --git a/arch/sh/boards/renesas/r7780rp/irq-r7780mp.c b/arch/sh/boards/mach-highlander/irq-r7780mp.c
index ae1cfcb29700..ae1cfcb29700 100644
--- a/arch/sh/boards/renesas/r7780rp/irq-r7780mp.c
+++ b/arch/sh/boards/mach-highlander/irq-r7780mp.c
diff --git a/arch/sh/boards/renesas/r7780rp/irq-r7780rp.c b/arch/sh/boards/mach-highlander/irq-r7780rp.c
index 9d3921fe27c0..9d3921fe27c0 100644
--- a/arch/sh/boards/renesas/r7780rp/irq-r7780rp.c
+++ b/arch/sh/boards/mach-highlander/irq-r7780rp.c
diff --git a/arch/sh/boards/renesas/r7780rp/irq-r7785rp.c b/arch/sh/boards/mach-highlander/irq-r7785rp.c
index 896c045aa39d..896c045aa39d 100644
--- a/arch/sh/boards/renesas/r7780rp/irq-r7785rp.c
+++ b/arch/sh/boards/mach-highlander/irq-r7785rp.c
diff --git a/arch/sh/boards/mach-highlander/psw.c b/arch/sh/boards/mach-highlander/psw.c
new file mode 100644
index 000000000000..be8d5477fc65
--- /dev/null
+++ b/arch/sh/boards/mach-highlander/psw.c
@@ -0,0 +1,122 @@
+/*
+ * arch/sh/boards/renesas/r7780rp/psw.c
+ *
+ * push switch support for RDBRP-1/RDBREVRP-1 debug boards.
+ *
+ * Copyright (C) 2006  Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/io.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+#include <asm/r7780rp.h>
+#include <asm/push-switch.h>
+
+static irqreturn_t psw_irq_handler(int irq, void *arg)
+{
+	struct platform_device *pdev = arg;
+	struct push_switch *psw = platform_get_drvdata(pdev);
+	struct push_switch_platform_info *psw_info = pdev->dev.platform_data;
+	unsigned int l, mask;
+	int ret = 0;
+
+	l = ctrl_inw(PA_DBSW);
+
+	/* Nothing to do if there's no state change */
+	if (psw->state) {
+		ret = 1;
+		goto out;
+	}
+
+	mask = l & 0x70;
+	/* Figure out who raised it */
+	if (mask & (1 << psw_info->bit)) {
+		psw->state = !!(mask & (1 << psw_info->bit));
+		if (psw->state)	/* debounce */
+			mod_timer(&psw->debounce, jiffies + 50);
+
+		ret = 1;
+	}
+
+out:
+	/* Clear the switch IRQs */
+	l |= (0x7 << 12);
+	ctrl_outw(l, PA_DBSW);
+
+	return IRQ_RETVAL(ret);
+}
+
+static struct resource psw_resources[] = {
+	[0] = {
+		.start	= IRQ_PSW,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct push_switch_platform_info s2_platform_data = {
+	.name		= "s2",
+	.bit		= 6,
+	.irq_flags	= IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING |
+			  IRQF_SHARED,
+	.irq_handler	= psw_irq_handler,
+};
+
+static struct platform_device s2_switch_device = {
+	.name		= "push-switch",
+	.id		= 0,
+	.num_resources	= ARRAY_SIZE(psw_resources),
+	.resource	= psw_resources,
+	.dev		= {
+		.platform_data = &s2_platform_data,
+	},
+};
+
+static struct push_switch_platform_info s3_platform_data = {
+	.name		= "s3",
+	.bit		= 5,
+	.irq_flags	= IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING |
+			  IRQF_SHARED,
+	.irq_handler	= psw_irq_handler,
+};
+
+static struct platform_device s3_switch_device = {
+	.name		= "push-switch",
+	.id		= 1,
+	.num_resources	= ARRAY_SIZE(psw_resources),
+	.resource	= psw_resources,
+	.dev		= {
+		.platform_data = &s3_platform_data,
+	},
+};
+
+static struct push_switch_platform_info s4_platform_data = {
+	.name		= "s4",
+	.bit		= 4,
+	.irq_flags	= IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING |
+			  IRQF_SHARED,
+	.irq_handler	= psw_irq_handler,
+};
+
+static struct platform_device s4_switch_device = {
+	.name		= "push-switch",
+	.id		= 2,
+	.num_resources	= ARRAY_SIZE(psw_resources),
+	.resource	= psw_resources,
+	.dev		= {
+		.platform_data = &s4_platform_data,
+	},
+};
+
+static struct platform_device *psw_devices[] = {
+	&s2_switch_device, &s3_switch_device, &s4_switch_device,
+};
+
+static int __init psw_init(void)
+{
+	return platform_add_devices(psw_devices, ARRAY_SIZE(psw_devices));
+}
+module_init(psw_init);
diff --git a/arch/sh/boards/renesas/r7780rp/setup.c b/arch/sh/boards/mach-highlander/setup.c
index bc79afb6fc4c..bc79afb6fc4c 100644
--- a/arch/sh/boards/renesas/r7780rp/setup.c
+++ b/arch/sh/boards/mach-highlander/setup.c
diff --git a/arch/sh/boards/hp6xx/Makefile b/arch/sh/boards/mach-hp6xx/Makefile
index b3124278247c..b3124278247c 100644
--- a/arch/sh/boards/hp6xx/Makefile
+++ b/arch/sh/boards/mach-hp6xx/Makefile
diff --git a/arch/sh/boards/hp6xx/hp6xx_apm.c b/arch/sh/boards/mach-hp6xx/hp6xx_apm.c
index 177f4f028e0d..177f4f028e0d 100644
--- a/arch/sh/boards/hp6xx/hp6xx_apm.c
+++ b/arch/sh/boards/mach-hp6xx/hp6xx_apm.c
diff --git a/arch/sh/boards/hp6xx/pm.c b/arch/sh/boards/mach-hp6xx/pm.c
index d22f6eac9cca..e96684def788 100644
--- a/arch/sh/boards/hp6xx/pm.c
+++ b/arch/sh/boards/mach-hp6xx/pm.c
@@ -13,7 +13,7 @@
 #include <asm/io.h>
 #include <asm/hd64461.h>
 #include <asm/hp6xx.h>
-#include <asm/cpu/dac.h>
+#include <cpu/dac.h>
 #include <asm/pm.h>
 
 #define STBCR		0xffffff82
diff --git a/arch/sh/boards/hp6xx/pm_wakeup.S b/arch/sh/boards/mach-hp6xx/pm_wakeup.S
index 45e9bf0b9115..44b648cf6f23 100644
--- a/arch/sh/boards/hp6xx/pm_wakeup.S
+++ b/arch/sh/boards/mach-hp6xx/pm_wakeup.S
@@ -8,7 +8,7 @@
  */
 
 #include <linux/linkage.h>
-#include <asm/cpu/mmu_context.h>
+#include <cpu/mmu_context.h>
 
 #define k0	r0
 #define k1	r1
diff --git a/arch/sh/boards/mach-hp6xx/setup.c b/arch/sh/boards/mach-hp6xx/setup.c
new file mode 100644
index 000000000000..475b46caec1f
--- /dev/null
+++ b/arch/sh/boards/mach-hp6xx/setup.c
@@ -0,0 +1,121 @@
+/*
+ * linux/arch/sh/boards/hp6xx/setup.c
+ *
+ * Copyright (C) 2002 Andriy Skulysh
+ * Copyright (C) 2007 Kristoffer Ericson <Kristoffer_e1@hotmail.com>
+ *
+ * May be copied or modified under the terms of the GNU General Public
+ * License.  See linux/COPYING for more information.
+ *
+ * Setup code for HP620/HP660/HP680/HP690 (internal peripherials only)
+ */
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <asm/hd64461.h>
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <asm/hp6xx.h>
+#include <cpu/dac.h>
+
+#define	SCPCR	0xa4000116
+#define	SCPDR	0xa4000136
+
+/* CF Slot */
+static struct resource cf_ide_resources[] = {
+	[0] = {
+		.start = 0x15000000 + 0x1f0,
+		.end   = 0x15000000 + 0x1f0 + 0x08 - 0x01,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = 0x15000000 + 0x1fe,
+		.end   = 0x15000000 + 0x1fe + 0x01,
+		.flags = IORESOURCE_MEM,
+	},
+	[2] = {
+		.start = 77,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device cf_ide_device = {
+	.name		=  "pata_platform",
+	.id		=  -1,
+	.num_resources	= ARRAY_SIZE(cf_ide_resources),
+	.resource	= cf_ide_resources,
+};
+
+static struct platform_device jornadakbd_device = {
+	.name		= "jornada680_kbd",
+	.id		= -1,
+};
+
+static struct platform_device *hp6xx_devices[] __initdata = {
+	&cf_ide_device,
+	&jornadakbd_device,
+};
+
+static void __init hp6xx_init_irq(void)
+{
+	/* Gets touchscreen and powerbutton IRQ working */
+	plat_irq_setup_pins(IRQ_MODE_IRQ);
+}
+
+static int __init hp6xx_devices_setup(void)
+{
+	return platform_add_devices(hp6xx_devices, ARRAY_SIZE(hp6xx_devices));
+}
+
+static void __init hp6xx_setup(char **cmdline_p)
+{
+	u8 v8;
+	u16 v;
+
+	v = inw(HD64461_STBCR);
+	v |=	HD64461_STBCR_SURTST | HD64461_STBCR_SIRST	|
+		HD64461_STBCR_STM1ST | HD64461_STBCR_STM0ST	|
+		HD64461_STBCR_SAFEST | HD64461_STBCR_SPC0ST	|
+		HD64461_STBCR_SMIAST | HD64461_STBCR_SAFECKE_OST|
+		HD64461_STBCR_SAFECKE_IST;
+#ifndef CONFIG_HD64461_ENABLER
+	v |= HD64461_STBCR_SPC1ST;
+#endif
+	outw(v, HD64461_STBCR);
+	v = inw(HD64461_GPADR);
+	v |= HD64461_GPADR_SPEAKER | HD64461_GPADR_PCMCIA0;
+	outw(v, HD64461_GPADR);
+
+	outw(HD64461_PCCGCR_VCC0 | HD64461_PCCSCR_VCC1, HD64461_PCC0GCR);
+
+#ifndef CONFIG_HD64461_ENABLER
+	outw(HD64461_PCCGCR_VCC0 | HD64461_PCCSCR_VCC1, HD64461_PCC1GCR);
+#endif
+
+	sh_dac_output(0, DAC_SPEAKER_VOLUME);
+	sh_dac_disable(DAC_SPEAKER_VOLUME);
+	v8 = ctrl_inb(DACR);
+	v8 &= ~DACR_DAE;
+	ctrl_outb(v8,DACR);
+
+	v8 = ctrl_inb(SCPDR);
+	v8 |= SCPDR_TS_SCAN_X | SCPDR_TS_SCAN_Y;
+	v8 &= ~SCPDR_TS_SCAN_ENABLE;
+	ctrl_outb(v8, SCPDR);
+
+	v = ctrl_inw(SCPCR);
+	v &= ~SCPCR_TS_MASK;
+	v |= SCPCR_TS_ENABLE;
+	ctrl_outw(v, SCPCR);
+}
+device_initcall(hp6xx_devices_setup);
+
+static struct sh_machine_vector mv_hp6xx __initmv = {
+	.mv_name = "hp6xx",
+	.mv_setup = hp6xx_setup,
+	/* IRQ's : CPU(64) + CCHIP(16) + FREE_TO_USE(6) */
+	.mv_nr_irqs = HD64461_IRQBASE + HD64461_IRQ_NUM + 6,
+	.mv_irq_demux = hd64461_irq_demux,
+	/* Enable IRQ0 -> IRQ3 in IRQ_MODE */
+	.mv_init_irq = hp6xx_init_irq,
+};
diff --git a/arch/sh/boards/landisk/Makefile b/arch/sh/boards/mach-landisk/Makefile
index a696b4277fa9..a696b4277fa9 100644
--- a/arch/sh/boards/landisk/Makefile
+++ b/arch/sh/boards/mach-landisk/Makefile
diff --git a/arch/sh/boards/landisk/gio.c b/arch/sh/boards/mach-landisk/gio.c
index 0c15b0a50b99..25cdf7358000 100644
--- a/arch/sh/boards/landisk/gio.c
+++ b/arch/sh/boards/mach-landisk/gio.c
@@ -20,8 +20,8 @@
 #include <linux/fs.h>
 #include <asm/io.h>
 #include <asm/uaccess.h>
-#include <asm/landisk/gio.h>
-#include <asm/landisk/iodata_landisk.h>
+#include <mach-landisk/mach/gio.h>
+#include <mach-landisk/mach/iodata_landisk.h>
 
 #define DEVCOUNT                4
 #define GIO_MINOR	        2	/* GIO minor no. */
diff --git a/arch/sh/boards/mach-landisk/irq.c b/arch/sh/boards/mach-landisk/irq.c
new file mode 100644
index 000000000000..7b284cde1f58
--- /dev/null
+++ b/arch/sh/boards/mach-landisk/irq.c
@@ -0,0 +1,56 @@
+/*
+ * arch/sh/boards/landisk/irq.c
+ *
+ * I-O DATA Device, Inc. LANDISK Support
+ *
+ * Copyright (C) 2005-2007 kogiidena
+ *
+ * Copyright (C) 2001  Ian da Silva, Jeremy Siegel
+ * Based largely on io_se.c.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/init.h>
+#include <linux/irq.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <mach-landisk/mach/iodata_landisk.h>
+
+static void disable_landisk_irq(unsigned int irq)
+{
+	unsigned char mask = 0xff ^ (0x01 << (irq - 5));
+
+	ctrl_outb(ctrl_inb(PA_IMASK) & mask, PA_IMASK);
+}
+
+static void enable_landisk_irq(unsigned int irq)
+{
+	unsigned char value = (0x01 << (irq - 5));
+
+	ctrl_outb(ctrl_inb(PA_IMASK) | value, PA_IMASK);
+}
+
+static struct irq_chip landisk_irq_chip __read_mostly = {
+	.name		= "LANDISK",
+	.mask		= disable_landisk_irq,
+	.unmask		= enable_landisk_irq,
+	.mask_ack	= disable_landisk_irq,
+};
+
+/*
+ * Initialize IRQ setting
+ */
+void __init init_landisk_IRQ(void)
+{
+	int i;
+
+	for (i = 5; i < 14; i++) {
+		disable_irq_nosync(i);
+		set_irq_chip_and_handler_name(i, &landisk_irq_chip,
+					      handle_level_irq, "level");
+		enable_landisk_irq(i);
+	}
+	ctrl_outb(0x00, PA_PWRINT_CLR);
+}
diff --git a/arch/sh/boards/mach-landisk/psw.c b/arch/sh/boards/mach-landisk/psw.c
new file mode 100644
index 000000000000..e6b0efa098d1
--- /dev/null
+++ b/arch/sh/boards/mach-landisk/psw.c
@@ -0,0 +1,143 @@
+/*
+ * arch/sh/boards/landisk/psw.c
+ *
+ * push switch support for LANDISK and USL-5P
+ *
+ * Copyright (C) 2006-2007  Paul Mundt
+ * Copyright (C) 2007  kogiidena
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/io.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+#include <mach-landisk/mach/iodata_landisk.h>
+#include <asm/push-switch.h>
+
+static irqreturn_t psw_irq_handler(int irq, void *arg)
+{
+	struct platform_device *pdev = arg;
+	struct push_switch *psw = platform_get_drvdata(pdev);
+	struct push_switch_platform_info *psw_info = pdev->dev.platform_data;
+	unsigned int sw_value;
+	int ret = 0;
+
+	sw_value = (0x0ff & (~ctrl_inb(PA_STATUS)));
+
+	/* Nothing to do if there's no state change */
+	if (psw->state) {
+		ret = 1;
+		goto out;
+	}
+
+	/* Figure out who raised it */
+	if (sw_value & (1 << psw_info->bit)) {
+		psw->state = 1;
+		mod_timer(&psw->debounce, jiffies + 50);
+		ret = 1;
+	}
+
+out:
+	/* Clear the switch IRQs */
+	ctrl_outb(0x00, PA_PWRINT_CLR);
+
+	return IRQ_RETVAL(ret);
+}
+
+static struct resource psw_power_resources[] = {
+	[0] = {
+		.start = IRQ_POWER,
+		.flags = IORESOURCE_IRQ,
+       },
+};
+
+static struct resource psw_usl5p_resources[] = {
+	[0] = {
+		.start = IRQ_BUTTON,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static struct push_switch_platform_info psw_power_platform_data = {
+	.name		= "psw_power",
+	.bit		= 4,
+	.irq_flags	= IRQF_SHARED,
+	.irq_handler	= psw_irq_handler,
+};
+
+static struct push_switch_platform_info psw1_platform_data = {
+	.name		= "psw1",
+	.bit		= 0,
+	.irq_flags	= IRQF_SHARED,
+	.irq_handler	= psw_irq_handler,
+};
+
+static struct push_switch_platform_info psw2_platform_data = {
+	.name		= "psw2",
+	.bit		= 2,
+	.irq_flags	= IRQF_SHARED,
+	.irq_handler	= psw_irq_handler,
+};
+
+static struct push_switch_platform_info psw3_platform_data = {
+	.name		= "psw3",
+	.bit		= 1,
+	.irq_flags	= IRQF_SHARED,
+	.irq_handler	= psw_irq_handler,
+};
+
+static struct platform_device psw_power_switch_device = {
+	.name		= "push-switch",
+	.id		= 0,
+	.num_resources	= ARRAY_SIZE(psw_power_resources),
+	.resource	= psw_power_resources,
+	.dev		= {
+		.platform_data = &psw_power_platform_data,
+	},
+};
+
+static struct platform_device psw1_switch_device = {
+	.name		= "push-switch",
+	.id		= 1,
+	.num_resources	= ARRAY_SIZE(psw_usl5p_resources),
+	.resource	= psw_usl5p_resources,
+	.dev		= {
+		.platform_data = &psw1_platform_data,
+	},
+};
+
+static struct platform_device psw2_switch_device = {
+	.name		= "push-switch",
+	.id		= 2,
+	.num_resources	= ARRAY_SIZE(psw_usl5p_resources),
+	.resource	= psw_usl5p_resources,
+	.dev		= {
+		.platform_data = &psw2_platform_data,
+	},
+};
+
+static struct platform_device psw3_switch_device = {
+	.name		= "push-switch",
+	.id		= 3,
+	.num_resources	= ARRAY_SIZE(psw_usl5p_resources),
+	.resource	= psw_usl5p_resources,
+	.dev = {
+		.platform_data = &psw3_platform_data,
+	},
+};
+
+static struct platform_device *psw_devices[] = {
+	&psw_power_switch_device,
+	&psw1_switch_device,
+	&psw2_switch_device,
+	&psw3_switch_device,
+};
+
+static int __init psw_init(void)
+{
+	return platform_add_devices(psw_devices, ARRAY_SIZE(psw_devices));
+}
+module_init(psw_init);
diff --git a/arch/sh/boards/mach-landisk/setup.c b/arch/sh/boards/mach-landisk/setup.c
new file mode 100644
index 000000000000..db22ea2e6d49
--- /dev/null
+++ b/arch/sh/boards/mach-landisk/setup.c
@@ -0,0 +1,105 @@
+/*
+ * arch/sh/boards/landisk/setup.c
+ *
+ * I-O DATA Device, Inc. LANDISK Support.
+ *
+ * Copyright (C) 2000 Kazumoto Kojima
+ * Copyright (C) 2002 Paul Mundt
+ * Copylight (C) 2002 Atom Create Engineering Co., Ltd.
+ * Copyright (C) 2005-2007 kogiidena
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/ata_platform.h>
+#include <linux/pm.h>
+#include <linux/mm.h>
+#include <asm/machvec.h>
+#include <mach-landisk/mach/iodata_landisk.h>
+#include <asm/io.h>
+
+void init_landisk_IRQ(void);
+
+static void landisk_power_off(void)
+{
+        ctrl_outb(0x01, PA_SHUTDOWN);
+}
+
+static struct resource cf_ide_resources[3];
+
+static struct pata_platform_info pata_info = {
+	.ioport_shift	= 1,
+};
+
+static struct platform_device cf_ide_device = {
+	.name		= "pata_platform",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(cf_ide_resources),
+	.resource	= cf_ide_resources,
+	.dev		= {
+		.platform_data = &pata_info,
+	},
+};
+
+static struct platform_device rtc_device = {
+	.name		= "rs5c313",
+	.id		= -1,
+};
+
+static struct platform_device *landisk_devices[] __initdata = {
+	&cf_ide_device,
+	&rtc_device,
+};
+
+static int __init landisk_devices_setup(void)
+{
+	pgprot_t prot;
+	unsigned long paddrbase;
+	void *cf_ide_base;
+
+	/* open I/O area window */
+	paddrbase = virt_to_phys((void *)PA_AREA5_IO);
+	prot = PAGE_KERNEL_PCC(1, _PAGE_PCC_IO16);
+	cf_ide_base = p3_ioremap(paddrbase, PAGE_SIZE, prot.pgprot);
+	if (!cf_ide_base) {
+		printk("allocate_cf_area : can't open CF I/O window!\n");
+		return -ENOMEM;
+	}
+
+	/* IDE cmd address : 0x1f0-0x1f7 and 0x3f6 */
+	cf_ide_resources[0].start = (unsigned long)cf_ide_base + 0x40;
+	cf_ide_resources[0].end   = (unsigned long)cf_ide_base + 0x40 + 0x0f;
+	cf_ide_resources[0].flags = IORESOURCE_IO;
+	cf_ide_resources[1].start = (unsigned long)cf_ide_base + 0x2c;
+	cf_ide_resources[1].end   = (unsigned long)cf_ide_base + 0x2c + 0x03;
+	cf_ide_resources[1].flags = IORESOURCE_IO;
+	cf_ide_resources[2].start = IRQ_FATA;
+	cf_ide_resources[2].flags = IORESOURCE_IRQ;
+
+	return platform_add_devices(landisk_devices,
+				    ARRAY_SIZE(landisk_devices));
+}
+
+__initcall(landisk_devices_setup);
+
+static void __init landisk_setup(char **cmdline_p)
+{
+        /* LED ON */
+	ctrl_outb(ctrl_inb(PA_LED) | 0x03, PA_LED);
+
+	printk(KERN_INFO "I-O DATA DEVICE, INC. \"LANDISK Series\" support.\n");
+	pm_power_off = landisk_power_off;
+}
+
+/*
+ * The Machine Vector
+ */
+static struct sh_machine_vector mv_landisk __initmv = {
+	.mv_name = "LANDISK",
+	.mv_nr_irqs = 72,
+	.mv_setup = landisk_setup,
+	.mv_init_irq = init_landisk_IRQ,
+};
diff --git a/arch/sh/boards/lboxre2/Makefile b/arch/sh/boards/mach-lboxre2/Makefile
index e9ed140c06f6..e9ed140c06f6 100644
--- a/arch/sh/boards/lboxre2/Makefile
+++ b/arch/sh/boards/mach-lboxre2/Makefile
diff --git a/arch/sh/boards/lboxre2/irq.c b/arch/sh/boards/mach-lboxre2/irq.c
index 5a1c3bbe7b50..5a1c3bbe7b50 100644
--- a/arch/sh/boards/lboxre2/irq.c
+++ b/arch/sh/boards/mach-lboxre2/irq.c
diff --git a/arch/sh/boards/lboxre2/setup.c b/arch/sh/boards/mach-lboxre2/setup.c
index c74440d38ee9..c74440d38ee9 100644
--- a/arch/sh/boards/lboxre2/setup.c
+++ b/arch/sh/boards/mach-lboxre2/setup.c
diff --git a/arch/sh/boards/superh/microdev/Makefile b/arch/sh/boards/mach-microdev/Makefile
index 1387dd6c85eb..1387dd6c85eb 100644
--- a/arch/sh/boards/superh/microdev/Makefile
+++ b/arch/sh/boards/mach-microdev/Makefile
diff --git a/arch/sh/boards/superh/microdev/io.c b/arch/sh/boards/mach-microdev/io.c
index 9f8a540f7e14..9f8a540f7e14 100644
--- a/arch/sh/boards/superh/microdev/io.c
+++ b/arch/sh/boards/mach-microdev/io.c
diff --git a/arch/sh/boards/superh/microdev/irq.c b/arch/sh/boards/mach-microdev/irq.c
index 4d335077a3ff..4d335077a3ff 100644
--- a/arch/sh/boards/superh/microdev/irq.c
+++ b/arch/sh/boards/mach-microdev/irq.c
diff --git a/arch/sh/boards/superh/microdev/led.c b/arch/sh/boards/mach-microdev/led.c
index 36e54b47a752..36e54b47a752 100644
--- a/arch/sh/boards/superh/microdev/led.c
+++ b/arch/sh/boards/mach-microdev/led.c
diff --git a/arch/sh/boards/superh/microdev/setup.c b/arch/sh/boards/mach-microdev/setup.c
index fc8cd06d66cf..fc8cd06d66cf 100644
--- a/arch/sh/boards/superh/microdev/setup.c
+++ b/arch/sh/boards/mach-microdev/setup.c
diff --git a/arch/sh/boards/mach-migor/Kconfig b/arch/sh/boards/mach-migor/Kconfig
new file mode 100644
index 000000000000..a7b3b728ec3c
--- /dev/null
+++ b/arch/sh/boards/mach-migor/Kconfig
@@ -0,0 +1,15 @@
+if SH_MIGOR
+
+choice
+	prompt "Migo-R LCD Panel Board Selection"
+	default SH_MIGOR_QVGA
+
+config SH_MIGOR_QVGA
+	bool "QVGA (320x240)"
+
+config SH_MIGOR_RTA_WVGA
+	bool "RTA WVGA (800x480)"
+
+endchoice
+
+endif
diff --git a/arch/sh/boards/mach-migor/Makefile b/arch/sh/boards/mach-migor/Makefile
new file mode 100644
index 000000000000..5f231dd25c0e
--- /dev/null
+++ b/arch/sh/boards/mach-migor/Makefile
@@ -0,0 +1,2 @@
+obj-y	 := setup.o
+obj-$(CONFIG_SH_MIGOR_QVGA)	+=  lcd_qvga.o
diff --git a/arch/sh/boards/mach-migor/lcd_qvga.c b/arch/sh/boards/mach-migor/lcd_qvga.c
new file mode 100644
index 000000000000..6e9609596448
--- /dev/null
+++ b/arch/sh/boards/mach-migor/lcd_qvga.c
@@ -0,0 +1,165 @@
+/*
+ * Support for SuperH MigoR Quarter VGA LCD Panel
+ *
+ * Copyright (C) 2008 Magnus Damm
+ *
+ * Based on lcd_powertip.c from Kenati Technologies Pvt Ltd.
+ * Copyright (c) 2007 Ujjwal Pande <ujjwal@kenati.com>,
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/fb.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <asm/sh_mobile_lcdc.h>
+#include <asm/migor.h>
+
+/* LCD Module is a PH240320T according to board schematics. This module
+ * is made up of a 240x320 LCD hooked up to a R61505U (or HX8347-A01?)
+ * Driver IC. This IC is connected to the SH7722 built-in LCDC using a
+ * SYS-80 interface configured in 16 bit mode.
+ *
+ * Index 0: "Device Code Read" returns 0x1505.
+ */
+
+static void reset_lcd_module(void)
+{
+	ctrl_outb(ctrl_inb(PORT_PHDR) & ~0x04, PORT_PHDR);
+	mdelay(2);
+	ctrl_outb(ctrl_inb(PORT_PHDR) | 0x04, PORT_PHDR);
+	mdelay(1);
+}
+
+/* DB0-DB7 are connected to D1-D8, and DB8-DB15 to D10-D17 */
+
+static unsigned long adjust_reg18(unsigned short data)
+{
+	unsigned long tmp1, tmp2;
+
+	tmp1 = (data<<1 | 0x00000001) & 0x000001FF;
+	tmp2 = (data<<2 | 0x00000200) & 0x0003FE00;
+	return tmp1 | tmp2;
+}
+
+static void write_reg(void *sys_ops_handle,
+		       struct sh_mobile_lcdc_sys_bus_ops *sys_ops,
+		       unsigned short reg, unsigned short data)
+{
+	sys_ops->write_index(sys_ops_handle, adjust_reg18(reg << 8 | data));
+}
+
+static void write_reg16(void *sys_ops_handle,
+			struct sh_mobile_lcdc_sys_bus_ops *sys_ops,
+			unsigned short reg, unsigned short data)
+{
+	sys_ops->write_index(sys_ops_handle, adjust_reg18(reg));
+	sys_ops->write_data(sys_ops_handle, adjust_reg18(data));
+}
+
+static unsigned long read_reg16(void *sys_ops_handle,
+				struct sh_mobile_lcdc_sys_bus_ops *sys_ops,
+				unsigned short reg)
+{
+	unsigned long data;
+
+	sys_ops->write_index(sys_ops_handle, adjust_reg18(reg));
+	data = sys_ops->read_data(sys_ops_handle);
+	return ((data >> 1) & 0xff) | ((data >> 2) & 0xff00);
+}
+
+static void migor_lcd_qvga_seq(void *sys_ops_handle,
+			       struct sh_mobile_lcdc_sys_bus_ops *sys_ops,
+			       unsigned short const *data, int no_data)
+{
+	int i;
+
+	for (i = 0; i < no_data; i += 2)
+		write_reg16(sys_ops_handle, sys_ops, data[i], data[i + 1]);
+}
+
+static const unsigned short sync_data[] = {
+	0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
+};
+
+static const unsigned short magic0_data[] = {
+	0x0060, 0x2700, 0x0008, 0x0808, 0x0090, 0x001A, 0x0007, 0x0001,
+	0x0017, 0x0001, 0x0019, 0x0000, 0x0010, 0x17B0, 0x0011, 0x0116,
+	0x0012, 0x0198, 0x0013, 0x1400, 0x0029, 0x000C, 0x0012, 0x01B8,
+};
+
+static const unsigned short magic1_data[] = {
+	0x0030, 0x0307, 0x0031, 0x0303, 0x0032, 0x0603, 0x0033, 0x0202,
+	0x0034, 0x0202, 0x0035, 0x0202, 0x0036, 0x1F1F, 0x0037, 0x0303,
+	0x0038, 0x0303, 0x0039, 0x0603, 0x003A, 0x0202, 0x003B, 0x0102,
+	0x003C, 0x0204, 0x003D, 0x0000, 0x0001, 0x0100, 0x0002, 0x0300,
+	0x0003, 0x5028, 0x0020, 0x00ef, 0x0021, 0x0000, 0x0004, 0x0000,
+	0x0009, 0x0000, 0x000A, 0x0008, 0x000C, 0x0000, 0x000D, 0x0000,
+	0x0015, 0x8000,
+};
+
+static const unsigned short magic2_data[] = {
+	0x0061, 0x0001, 0x0092, 0x0100, 0x0093, 0x0001, 0x0007, 0x0021,
+};
+
+static const unsigned short magic3_data[] = {
+	0x0010, 0x16B0, 0x0011, 0x0111, 0x0007, 0x0061,
+};
+
+int migor_lcd_qvga_setup(void *board_data, void *sohandle,
+			 struct sh_mobile_lcdc_sys_bus_ops *so)
+{
+	unsigned long xres = 320;
+	unsigned long yres = 240;
+	int k;
+
+	reset_lcd_module();
+	migor_lcd_qvga_seq(sohandle, so, sync_data, ARRAY_SIZE(sync_data));
+
+	if (read_reg16(sohandle, so, 0) != 0x1505)
+		return -ENODEV;
+
+	pr_info("Migo-R QVGA LCD Module detected.\n");
+
+	migor_lcd_qvga_seq(sohandle, so, sync_data, ARRAY_SIZE(sync_data));
+	write_reg16(sohandle, so, 0x00A4, 0x0001);
+	mdelay(10);
+
+	migor_lcd_qvga_seq(sohandle, so, magic0_data, ARRAY_SIZE(magic0_data));
+	mdelay(100);
+
+	migor_lcd_qvga_seq(sohandle, so, magic1_data, ARRAY_SIZE(magic1_data));
+	write_reg16(sohandle, so, 0x0050, 0xef - (yres - 1));
+	write_reg16(sohandle, so, 0x0051, 0x00ef);
+	write_reg16(sohandle, so, 0x0052, 0x0000);
+	write_reg16(sohandle, so, 0x0053, xres - 1);
+
+	migor_lcd_qvga_seq(sohandle, so, magic2_data, ARRAY_SIZE(magic2_data));
+	mdelay(10);
+
+	migor_lcd_qvga_seq(sohandle, so, magic3_data, ARRAY_SIZE(magic3_data));
+	mdelay(40);
+
+	/* clear GRAM to avoid displaying garbage */
+
+	write_reg16(sohandle, so, 0x0020, 0x0000); /* horiz addr */
+	write_reg16(sohandle, so, 0x0021, 0x0000); /* vert addr */
+
+	for (k = 0; k < (xres * 256); k++) /* yes, 256 words per line */
+		write_reg16(sohandle, so, 0x0022, 0x0000);
+
+	write_reg16(sohandle, so, 0x0020, 0x0000); /* reset horiz addr */
+	write_reg16(sohandle, so, 0x0021, 0x0000); /* reset vert addr */
+	write_reg16(sohandle, so, 0x0007, 0x0173);
+	mdelay(40);
+
+	/* enable display */
+	write_reg(sohandle, so, 0x00, 0x22);
+	mdelay(100);
+	return 0;
+}
diff --git a/arch/sh/boards/mach-migor/setup.c b/arch/sh/boards/mach-migor/setup.c
new file mode 100644
index 000000000000..714dce91cc9b
--- /dev/null
+++ b/arch/sh/boards/mach-migor/setup.c
@@ -0,0 +1,535 @@
+/*
+ * Renesas System Solutions Asia Pte. Ltd - Migo-R
+ *
+ * Copyright (C) 2008 Magnus Damm
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/interrupt.h>
+#include <linux/input.h>
+#include <linux/mtd/physmap.h>
+#include <linux/mtd/nand.h>
+#include <linux/i2c.h>
+#include <linux/smc91x.h>
+#include <linux/delay.h>
+#include <linux/clk.h>
+#include <media/soc_camera_platform.h>
+#include <media/sh_mobile_ceu.h>
+#include <asm/clock.h>
+#include <asm/machvec.h>
+#include <asm/io.h>
+#include <asm/sh_keysc.h>
+#include <asm/sh_mobile_lcdc.h>
+#include <asm/migor.h>
+
+/* Address     IRQ  Size  Bus  Description
+ * 0x00000000       64MB  16   NOR Flash (SP29PL256N)
+ * 0x0c000000       64MB  64   SDRAM (2xK4M563233G)
+ * 0x10000000  IRQ0       16   Ethernet (SMC91C111)
+ * 0x14000000  IRQ4       16   USB 2.0 Host Controller (M66596)
+ * 0x18000000       8GB    8   NAND Flash (K9K8G08U0A)
+ */
+
+static struct smc91x_platdata smc91x_info = {
+	.flags = SMC91X_USE_16BIT,
+};
+
+static struct resource smc91x_eth_resources[] = {
+	[0] = {
+		.name   = "SMC91C111" ,
+		.start  = 0x10000300,
+		.end    = 0x1000030f,
+		.flags  = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start  = 32, /* IRQ0 */
+		.flags  = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
+	},
+};
+
+static struct platform_device smc91x_eth_device = {
+	.name           = "smc91x",
+	.num_resources  = ARRAY_SIZE(smc91x_eth_resources),
+	.resource       = smc91x_eth_resources,
+	.dev	= {
+		.platform_data	= &smc91x_info,
+	},
+};
+
+static struct sh_keysc_info sh_keysc_info = {
+	.mode = SH_KEYSC_MODE_2, /* KEYOUT0->4, KEYIN1->5 */
+	.scan_timing = 3,
+	.delay = 5,
+	.keycodes = {
+		0, KEY_UP, KEY_DOWN, KEY_LEFT, KEY_RIGHT, KEY_ENTER,
+		0, KEY_F, KEY_C, KEY_D,	KEY_H, KEY_1,
+		0, KEY_2, KEY_3, KEY_4,	KEY_5, KEY_6,
+		0, KEY_7, KEY_8, KEY_9, KEY_S, KEY_0,
+		0, KEY_P, KEY_STOP, KEY_REWIND, KEY_PLAY, KEY_FASTFORWARD,
+	},
+};
+
+static struct resource sh_keysc_resources[] = {
+	[0] = {
+		.start  = 0x044b0000,
+		.end    = 0x044b000f,
+		.flags  = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start  = 79,
+		.flags  = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device sh_keysc_device = {
+	.name           = "sh_keysc",
+	.num_resources  = ARRAY_SIZE(sh_keysc_resources),
+	.resource       = sh_keysc_resources,
+	.dev	= {
+		.platform_data	= &sh_keysc_info,
+	},
+};
+
+static struct mtd_partition migor_nor_flash_partitions[] =
+{
+	{
+		.name = "uboot",
+		.offset = 0,
+		.size = (1 * 1024 * 1024),
+		.mask_flags = MTD_WRITEABLE,	/* Read-only */
+	},
+	{
+		.name = "rootfs",
+		.offset = MTDPART_OFS_APPEND,
+		.size = (15 * 1024 * 1024),
+	},
+	{
+		.name = "other",
+		.offset = MTDPART_OFS_APPEND,
+		.size = MTDPART_SIZ_FULL,
+	},
+};
+
+static struct physmap_flash_data migor_nor_flash_data = {
+	.width		= 2,
+	.parts		= migor_nor_flash_partitions,
+	.nr_parts	= ARRAY_SIZE(migor_nor_flash_partitions),
+};
+
+static struct resource migor_nor_flash_resources[] = {
+	[0] = {
+		.name		= "NOR Flash",
+		.start		= 0x00000000,
+		.end		= 0x03ffffff,
+		.flags		= IORESOURCE_MEM,
+	}
+};
+
+static struct platform_device migor_nor_flash_device = {
+	.name		= "physmap-flash",
+	.resource	= migor_nor_flash_resources,
+	.num_resources	= ARRAY_SIZE(migor_nor_flash_resources),
+	.dev		= {
+		.platform_data = &migor_nor_flash_data,
+	},
+};
+
+static struct mtd_partition migor_nand_flash_partitions[] = {
+	{
+		.name		= "nanddata1",
+		.offset		= 0x0,
+		.size		= 512 * 1024 * 1024,
+	},
+	{
+		.name		= "nanddata2",
+		.offset		= MTDPART_OFS_APPEND,
+		.size		= 512 * 1024 * 1024,
+	},
+};
+
+static void migor_nand_flash_cmd_ctl(struct mtd_info *mtd, int cmd,
+				     unsigned int ctrl)
+{
+	struct nand_chip *chip = mtd->priv;
+
+	if (cmd == NAND_CMD_NONE)
+		return;
+
+	if (ctrl & NAND_CLE)
+		writeb(cmd, chip->IO_ADDR_W + 0x00400000);
+	else if (ctrl & NAND_ALE)
+		writeb(cmd, chip->IO_ADDR_W + 0x00800000);
+	else
+		writeb(cmd, chip->IO_ADDR_W);
+}
+
+static int migor_nand_flash_ready(struct mtd_info *mtd)
+{
+	return ctrl_inb(PORT_PADR) & 0x02; /* PTA1 */
+}
+
+struct platform_nand_data migor_nand_flash_data = {
+	.chip = {
+		.nr_chips = 1,
+		.partitions = migor_nand_flash_partitions,
+		.nr_partitions = ARRAY_SIZE(migor_nand_flash_partitions),
+		.chip_delay = 20,
+		.part_probe_types = (const char *[]) { "cmdlinepart", NULL },
+	},
+	.ctrl = {
+		.dev_ready = migor_nand_flash_ready,
+		.cmd_ctrl = migor_nand_flash_cmd_ctl,
+	},
+};
+
+static struct resource migor_nand_flash_resources[] = {
+	[0] = {
+		.name		= "NAND Flash",
+		.start		= 0x18000000,
+		.end		= 0x18ffffff,
+		.flags		= IORESOURCE_MEM,
+	},
+};
+
+static struct platform_device migor_nand_flash_device = {
+	.name		= "gen_nand",
+	.resource	= migor_nand_flash_resources,
+	.num_resources	= ARRAY_SIZE(migor_nand_flash_resources),
+	.dev		= {
+		.platform_data = &migor_nand_flash_data,
+	}
+};
+
+static struct sh_mobile_lcdc_info sh_mobile_lcdc_info = {
+#ifdef CONFIG_SH_MIGOR_RTA_WVGA
+	.clock_source = LCDC_CLK_BUS,
+	.ch[0] = {
+		.chan = LCDC_CHAN_MAINLCD,
+		.bpp = 16,
+		.interface_type = RGB16,
+		.clock_divider = 2,
+		.lcd_cfg = {
+			.name = "LB070WV1",
+			.xres = 800,
+			.yres = 480,
+			.left_margin = 64,
+			.right_margin = 16,
+			.hsync_len = 120,
+			.upper_margin = 1,
+			.lower_margin = 17,
+			.vsync_len = 2,
+			.sync = 0,
+		},
+		.lcd_size_cfg = { /* 7.0 inch */
+			.width = 152,
+			.height = 91,
+		},
+	}
+#endif
+#ifdef CONFIG_SH_MIGOR_QVGA
+	.clock_source = LCDC_CLK_PERIPHERAL,
+	.ch[0] = {
+		.chan = LCDC_CHAN_MAINLCD,
+		.bpp = 16,
+		.interface_type = SYS16A,
+		.clock_divider = 10,
+		.lcd_cfg = {
+			.name = "PH240320T",
+			.xres = 320,
+			.yres = 240,
+			.left_margin = 0,
+			.right_margin = 16,
+			.hsync_len = 8,
+			.upper_margin = 1,
+			.lower_margin = 17,
+			.vsync_len = 2,
+			.sync = FB_SYNC_HOR_HIGH_ACT,
+		},
+		.lcd_size_cfg = { /* 2.4 inch */
+			.width = 49,
+			.height = 37,
+		},
+		.board_cfg = {
+			.setup_sys = migor_lcd_qvga_setup,
+		},
+		.sys_bus_cfg = {
+			.ldmt2r = 0x06000a09,
+			.ldmt3r = 0x180e3418,
+		},
+	}
+#endif
+};
+
+static struct resource migor_lcdc_resources[] = {
+	[0] = {
+		.name	= "LCDC",
+		.start	= 0xfe940000, /* P4-only space */
+		.end	= 0xfe941fff,
+		.flags	= IORESOURCE_MEM,
+	},
+};
+
+static struct platform_device migor_lcdc_device = {
+	.name		= "sh_mobile_lcdc_fb",
+	.num_resources	= ARRAY_SIZE(migor_lcdc_resources),
+	.resource	= migor_lcdc_resources,
+	.dev	= {
+		.platform_data	= &sh_mobile_lcdc_info,
+	},
+};
+
+static struct clk *camera_clk;
+
+static void camera_power_on(void)
+{
+	unsigned char value;
+
+	camera_clk = clk_get(NULL, "video_clk");
+	clk_set_rate(camera_clk, 24000000);
+	clk_enable(camera_clk);	/* start VIO_CKO */
+
+	mdelay(10);
+	value = ctrl_inb(PORT_PTDR);
+	value &= ~0x09;
+#ifndef CONFIG_SH_MIGOR_RTA_WVGA
+	value |= 0x01;
+#endif
+	ctrl_outb(value, PORT_PTDR);
+	mdelay(10);
+
+	ctrl_outb(value | 8, PORT_PTDR);
+}
+
+static void camera_power_off(void)
+{
+	clk_disable(camera_clk); /* stop VIO_CKO */
+	clk_put(camera_clk);
+
+	ctrl_outb(ctrl_inb(PORT_PTDR) & ~0x08, PORT_PTDR);
+}
+
+#ifdef CONFIG_I2C
+static unsigned char camera_ov772x_magic[] =
+{
+	0x09, 0x01, 0x0c, 0x10, 0x0d, 0x41, 0x0e, 0x01,
+	0x12, 0x00, 0x13, 0x8F, 0x14, 0x4A, 0x15, 0x00,
+	0x16, 0x00, 0x17, 0x23, 0x18, 0xa0, 0x19, 0x07,
+	0x1a, 0xf0, 0x1b, 0x40, 0x1f, 0x00, 0x20, 0x10,
+	0x22, 0xff, 0x23, 0x01, 0x28, 0x00, 0x29, 0xa0,
+	0x2a, 0x00, 0x2b, 0x00, 0x2c, 0xf0, 0x2d, 0x00,
+	0x2e, 0x00, 0x30, 0x80, 0x31, 0x60, 0x32, 0x00,
+	0x33, 0x00, 0x34, 0x00, 0x3d, 0x80, 0x3e, 0xe2,
+	0x3f, 0x1f, 0x42, 0x80, 0x43, 0x80, 0x44, 0x80,
+	0x45, 0x80, 0x46, 0x00, 0x47, 0x00, 0x48, 0x00,
+	0x49, 0x50, 0x4a, 0x30, 0x4b, 0x50, 0x4c, 0x50,
+	0x4d, 0x00, 0x4e, 0xef, 0x4f, 0x10, 0x50, 0x60,
+	0x51, 0x00, 0x52, 0x00, 0x53, 0x24, 0x54, 0x7a,
+	0x55, 0xfc, 0x62, 0xff, 0x63, 0xf0, 0x64, 0x1f,
+	0x65, 0x00, 0x66, 0x10, 0x67, 0x00, 0x68, 0x00,
+	0x69, 0x5c, 0x6a, 0x11, 0x6b, 0xa2, 0x6c, 0x01,
+	0x6d, 0x50, 0x6e, 0x80, 0x6f, 0x80, 0x70, 0x0f,
+	0x71, 0x00, 0x72, 0x00, 0x73, 0x0f, 0x74, 0x0f,
+	0x75, 0xff, 0x78, 0x10, 0x79, 0x70, 0x7a, 0x70,
+	0x7b, 0xf0, 0x7c, 0xf0, 0x7d, 0xf0, 0x7e, 0x0e,
+	0x7f, 0x1a, 0x80, 0x31, 0x81, 0x5a, 0x82, 0x69,
+	0x83, 0x75, 0x84, 0x7e, 0x85, 0x88, 0x86, 0x8f,
+	0x87, 0x96, 0x88, 0xa3, 0x89, 0xaf, 0x8a, 0xc4,
+	0x8b, 0xd7, 0x8c, 0xe8, 0x8d, 0x20, 0x8e, 0x00,
+	0x8f, 0x00, 0x90, 0x08, 0x91, 0x10, 0x92, 0x1f,
+	0x93, 0x01, 0x94, 0x2c, 0x95, 0x24, 0x96, 0x08,
+	0x97, 0x14, 0x98, 0x24, 0x99, 0x38, 0x9a, 0x9e,
+	0x9b, 0x00, 0x9c, 0x40, 0x9e, 0x11, 0x9f, 0x02,
+	0xa0, 0x00, 0xa1, 0x40, 0xa2, 0x40, 0xa3, 0x06,
+	0xa4, 0x00, 0xa6, 0x00, 0xa7, 0x40, 0xa8, 0x40,
+	0xa9, 0x80, 0xaa, 0x80, 0xab, 0x06, 0xac, 0xff,
+	0x12, 0x06, 0x64, 0x3f, 0x12, 0x46, 0x17, 0x3f,
+	0x18, 0x50, 0x19, 0x03, 0x1a, 0x78, 0x29, 0x50,
+	0x2c, 0x78,
+};
+
+static int ov772x_set_capture(struct soc_camera_platform_info *info,
+			      int enable)
+{
+	struct i2c_adapter *a = i2c_get_adapter(0);
+	struct i2c_msg msg;
+	int ret = 0;
+	int i;
+
+	if (!enable)
+		return 0; /* camera_power_off() is enough */
+
+	for (i = 0; i < ARRAY_SIZE(camera_ov772x_magic); i += 2) {
+		u_int8_t buf[8];
+
+		msg.addr = 0x21;
+		msg.buf = buf;
+		msg.len = 2;
+		msg.flags = 0;
+
+		buf[0] = camera_ov772x_magic[i];
+		buf[1] = camera_ov772x_magic[i + 1];
+
+		ret = (ret < 0) ? ret : i2c_transfer(a, &msg, 1);
+	}
+
+	return ret;
+}
+
+static struct soc_camera_platform_info ov772x_info = {
+	.iface = 0,
+	.format_name = "RGB565",
+	.format_depth = 16,
+	.format = {
+		.pixelformat = V4L2_PIX_FMT_RGB565,
+		.colorspace = V4L2_COLORSPACE_SRGB,
+		.width = 320,
+		.height = 240,
+	},
+	.bus_param =  SOCAM_PCLK_SAMPLE_RISING | SOCAM_HSYNC_ACTIVE_HIGH |
+	SOCAM_VSYNC_ACTIVE_HIGH | SOCAM_MASTER | SOCAM_DATAWIDTH_8,
+	.set_capture = ov772x_set_capture,
+};
+
+static struct platform_device migor_camera_device = {
+	.name		= "soc_camera_platform",
+	.dev	= {
+		.platform_data	= &ov772x_info,
+	},
+};
+#endif /* CONFIG_I2C */
+
+static struct sh_mobile_ceu_info sh_mobile_ceu_info = {
+	.flags = SOCAM_MASTER | SOCAM_DATAWIDTH_8 | SOCAM_PCLK_SAMPLE_RISING \
+	| SOCAM_HSYNC_ACTIVE_HIGH | SOCAM_VSYNC_ACTIVE_HIGH,
+	.enable_camera = camera_power_on,
+	.disable_camera = camera_power_off,
+};
+
+static struct resource migor_ceu_resources[] = {
+	[0] = {
+		.name	= "CEU",
+		.start	= 0xfe910000,
+		.end	= 0xfe91009f,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start  = 52,
+		.flags  = IORESOURCE_IRQ,
+	},
+	[2] = {
+		/* place holder for contiguous memory */
+	},
+};
+
+static struct platform_device migor_ceu_device = {
+	.name		= "sh_mobile_ceu",
+	.num_resources	= ARRAY_SIZE(migor_ceu_resources),
+	.resource	= migor_ceu_resources,
+	.dev	= {
+		.platform_data	= &sh_mobile_ceu_info,
+	},
+};
+
+static struct platform_device *migor_devices[] __initdata = {
+	&smc91x_eth_device,
+	&sh_keysc_device,
+	&migor_lcdc_device,
+	&migor_ceu_device,
+#ifdef CONFIG_I2C
+	&migor_camera_device,
+#endif
+	&migor_nor_flash_device,
+	&migor_nand_flash_device,
+};
+
+static struct i2c_board_info migor_i2c_devices[] = {
+	{
+		I2C_BOARD_INFO("rs5c372b", 0x32),
+	},
+	{
+		I2C_BOARD_INFO("migor_ts", 0x51),
+		.irq = 38, /* IRQ6 */
+	},
+};
+
+static int __init migor_devices_setup(void)
+{
+	clk_always_enable("mstp214"); /* KEYSC */
+	clk_always_enable("mstp200"); /* LCDC */
+	clk_always_enable("mstp203"); /* CEU */
+
+	platform_resource_setup_memory(&migor_ceu_device, "ceu", 4 << 20);
+
+	i2c_register_board_info(0, migor_i2c_devices,
+				ARRAY_SIZE(migor_i2c_devices));
+ 
+	return platform_add_devices(migor_devices, ARRAY_SIZE(migor_devices));
+}
+__initcall(migor_devices_setup);
+
+static void __init migor_setup(char **cmdline_p)
+{
+	/* SMC91C111 - Enable IRQ0 */
+	ctrl_outw(ctrl_inw(PORT_PJCR) & ~0x0003, PORT_PJCR);
+
+	/* KEYSC */
+	ctrl_outw(ctrl_inw(PORT_PYCR) & ~0x0fff, PORT_PYCR);
+	ctrl_outw(ctrl_inw(PORT_PZCR) & ~0x0ff0, PORT_PZCR);
+	ctrl_outw(ctrl_inw(PORT_PSELA) & ~0x4100, PORT_PSELA);
+	ctrl_outw(ctrl_inw(PORT_HIZCRA) & ~0x4000, PORT_HIZCRA);
+	ctrl_outw(ctrl_inw(PORT_HIZCRC) & ~0xc000, PORT_HIZCRC);
+
+	/* NAND Flash */
+	ctrl_outw(ctrl_inw(PORT_PXCR) & 0x0fff, PORT_PXCR);
+	ctrl_outl((ctrl_inl(BSC_CS6ABCR) & ~0x00000600) | 0x00000200,
+		  BSC_CS6ABCR);
+
+	/* Touch Panel - Enable IRQ6 */
+	ctrl_outw(ctrl_inw(PORT_PZCR) & ~0xc, PORT_PZCR);
+	ctrl_outw((ctrl_inw(PORT_PSELA) | 0x8000), PORT_PSELA);
+	ctrl_outw((ctrl_inw(PORT_HIZCRC) & ~0x4000), PORT_HIZCRC);
+
+#ifdef CONFIG_SH_MIGOR_RTA_WVGA
+	/* LCDC - WVGA - Enable RGB Interface signals */
+	ctrl_outw(ctrl_inw(PORT_PACR) & ~0x0003, PORT_PACR);
+	ctrl_outw(0x0000, PORT_PHCR);
+	ctrl_outw(0x0000, PORT_PLCR);
+	ctrl_outw(0x0000, PORT_PMCR);
+	ctrl_outw(ctrl_inw(PORT_PRCR) & ~0x000f, PORT_PRCR);
+	ctrl_outw((ctrl_inw(PORT_PSELD) & ~0x000d) | 0x0400, PORT_PSELD);
+	ctrl_outw(ctrl_inw(PORT_MSELCRB) & ~0x0100, PORT_MSELCRB);
+	ctrl_outw(ctrl_inw(PORT_HIZCRA) & ~0x01e0, PORT_HIZCRA);
+#endif
+#ifdef CONFIG_SH_MIGOR_QVGA
+	/* LCDC - QVGA - Enable SYS Interface signals */
+	ctrl_outw(ctrl_inw(PORT_PACR) & ~0x0003, PORT_PACR);
+	ctrl_outw((ctrl_inw(PORT_PHCR) & ~0xcfff) | 0x0010, PORT_PHCR);
+	ctrl_outw(0x0000, PORT_PLCR);
+	ctrl_outw(0x0000, PORT_PMCR);
+	ctrl_outw(ctrl_inw(PORT_PRCR) & ~0x030f, PORT_PRCR);
+	ctrl_outw((ctrl_inw(PORT_PSELD) & ~0x0001) | 0x0420, PORT_PSELD);
+	ctrl_outw(ctrl_inw(PORT_MSELCRB) | 0x0100, PORT_MSELCRB);
+	ctrl_outw(ctrl_inw(PORT_HIZCRA) & ~0x01e0, PORT_HIZCRA);
+#endif
+
+	/* CEU */
+	ctrl_outw((ctrl_inw(PORT_PTCR) & ~0x03c3) | 0x0051, PORT_PTCR);
+	ctrl_outw(ctrl_inw(PORT_PUCR) & ~0x03ff, PORT_PUCR);
+	ctrl_outw(ctrl_inw(PORT_PVCR) & ~0x03ff, PORT_PVCR);
+	ctrl_outw(ctrl_inw(PORT_PWCR) & ~0x3c00, PORT_PWCR);
+	ctrl_outw(ctrl_inw(PORT_PSELC) | 0x0001, PORT_PSELC);
+	ctrl_outw(ctrl_inw(PORT_PSELD) & ~0x2000, PORT_PSELD);
+	ctrl_outw(ctrl_inw(PORT_PSELE) | 0x000f, PORT_PSELE);
+	ctrl_outw(ctrl_inw(PORT_MSELCRB) | 0x2200, PORT_MSELCRB);
+	ctrl_outw(ctrl_inw(PORT_HIZCRA) & ~0x0a00, PORT_HIZCRA);
+	ctrl_outw(ctrl_inw(PORT_HIZCRB) & ~0x0003, PORT_HIZCRB);
+}
+
+static struct sh_machine_vector mv_migor __initmv = {
+	.mv_name		= "Migo-R",
+	.mv_setup		= migor_setup,
+};
diff --git a/arch/sh/boards/renesas/rts7751r2d/Kconfig b/arch/sh/boards/mach-r2d/Kconfig
index 8122a9667fc9..8122a9667fc9 100644
--- a/arch/sh/boards/renesas/rts7751r2d/Kconfig
+++ b/arch/sh/boards/mach-r2d/Kconfig
diff --git a/arch/sh/boards/renesas/rts7751r2d/Makefile b/arch/sh/boards/mach-r2d/Makefile
index 0d4c75a72be0..0d4c75a72be0 100644
--- a/arch/sh/boards/renesas/rts7751r2d/Makefile
+++ b/arch/sh/boards/mach-r2d/Makefile
diff --git a/arch/sh/boards/renesas/rts7751r2d/irq.c b/arch/sh/boards/mach-r2d/irq.c
index 8e49f6e51247..8e49f6e51247 100644
--- a/arch/sh/boards/renesas/rts7751r2d/irq.c
+++ b/arch/sh/boards/mach-r2d/irq.c
diff --git a/arch/sh/boards/renesas/rts7751r2d/setup.c b/arch/sh/boards/mach-r2d/setup.c
index 2308e8753bcd..2308e8753bcd 100644
--- a/arch/sh/boards/renesas/rts7751r2d/setup.c
+++ b/arch/sh/boards/mach-r2d/setup.c
diff --git a/arch/sh/boards/renesas/sdk7780/Kconfig b/arch/sh/boards/mach-sdk7780/Kconfig
index 065f1df09bf1..065f1df09bf1 100644
--- a/arch/sh/boards/renesas/sdk7780/Kconfig
+++ b/arch/sh/boards/mach-sdk7780/Kconfig
diff --git a/arch/sh/boards/renesas/sdk7780/Makefile b/arch/sh/boards/mach-sdk7780/Makefile
index 3d8f0befc35d..3d8f0befc35d 100644
--- a/arch/sh/boards/renesas/sdk7780/Makefile
+++ b/arch/sh/boards/mach-sdk7780/Makefile
diff --git a/arch/sh/boards/renesas/sdk7780/irq.c b/arch/sh/boards/mach-sdk7780/irq.c
index 87cdc578f6ff..87cdc578f6ff 100644
--- a/arch/sh/boards/renesas/sdk7780/irq.c
+++ b/arch/sh/boards/mach-sdk7780/irq.c
diff --git a/arch/sh/boards/renesas/sdk7780/setup.c b/arch/sh/boards/mach-sdk7780/setup.c
index acc5932587f1..acc5932587f1 100644
--- a/arch/sh/boards/renesas/sdk7780/setup.c
+++ b/arch/sh/boards/mach-sdk7780/setup.c
diff --git a/arch/sh/boards/se/7206/Makefile b/arch/sh/boards/mach-se/7206/Makefile
index 63e7ed699f39..63e7ed699f39 100644
--- a/arch/sh/boards/se/7206/Makefile
+++ b/arch/sh/boards/mach-se/7206/Makefile
diff --git a/arch/sh/boards/mach-se/7206/io.c b/arch/sh/boards/mach-se/7206/io.c
new file mode 100644
index 000000000000..9c3a33210d61
--- /dev/null
+++ b/arch/sh/boards/mach-se/7206/io.c
@@ -0,0 +1,104 @@
+/* $Id: io.c,v 1.5 2004/02/22 23:08:43 kkojima Exp $
+ *
+ * linux/arch/sh/boards/se/7206/io.c
+ *
+ * Copyright (C) 2006 Yoshinori Sato
+ *
+ * I/O routine for Hitachi 7206 SolutionEngine.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <asm/io.h>
+#include <mach-se/mach/se7206.h>
+
+
+static inline void delay(void)
+{
+	ctrl_inw(0x20000000);  /* P2 ROM Area */
+}
+
+/* MS7750 requires special versions of in*, out* routines, since
+   PC-like io ports are located at upper half byte of 16-bit word which
+   can be accessed only with 16-bit wide.  */
+
+static inline volatile __u16 *
+port2adr(unsigned int port)
+{
+	if (port >= 0x2000 && port < 0x2020)
+		return (volatile __u16 *) (PA_MRSHPC + (port - 0x2000));
+	else if (port >= 0x300 && port < 0x310)
+		return (volatile __u16 *) (PA_SMSC + (port - 0x300));
+
+	return (volatile __u16 *)port;
+}
+
+unsigned char se7206_inb(unsigned long port)
+{
+	return (*port2adr(port)) & 0xff;
+}
+
+unsigned char se7206_inb_p(unsigned long port)
+{
+	unsigned long v;
+
+	v = (*port2adr(port)) & 0xff;
+	delay();
+	return v;
+}
+
+unsigned short se7206_inw(unsigned long port)
+{
+	return *port2adr(port);;
+}
+
+void se7206_outb(unsigned char value, unsigned long port)
+{
+	*(port2adr(port)) = value;
+}
+
+void se7206_outb_p(unsigned char value, unsigned long port)
+{
+	*(port2adr(port)) = value;
+	delay();
+}
+
+void se7206_outw(unsigned short value, unsigned long port)
+{
+	*port2adr(port) = value;
+}
+
+void se7206_insb(unsigned long port, void *addr, unsigned long count)
+{
+	volatile __u16 *p = port2adr(port);
+	__u8 *ap = addr;
+
+	while (count--)
+		*ap++ = *p;
+}
+
+void se7206_insw(unsigned long port, void *addr, unsigned long count)
+{
+	volatile __u16 *p = port2adr(port);
+	__u16 *ap = addr;
+	while (count--)
+		*ap++ = *p;
+}
+
+void se7206_outsb(unsigned long port, const void *addr, unsigned long count)
+{
+	volatile __u16 *p = port2adr(port);
+	const __u8 *ap = addr;
+
+	while (count--)
+		*p = *ap++;
+}
+
+void se7206_outsw(unsigned long port, const void *addr, unsigned long count)
+{
+	volatile __u16 *p = port2adr(port);
+	const __u16 *ap = addr;
+	while (count--)
+		*p = *ap++;
+}
diff --git a/arch/sh/boards/mach-se/7206/irq.c b/arch/sh/boards/mach-se/7206/irq.c
new file mode 100644
index 000000000000..aef7f052851a
--- /dev/null
+++ b/arch/sh/boards/mach-se/7206/irq.c
@@ -0,0 +1,146 @@
+/*
+ * linux/arch/sh/boards/se/7206/irq.c
+ *
+ * Copyright (C) 2005,2006 Yoshinori Sato
+ *
+ * Hitachi SolutionEngine Support.
+ *
+ */
+#include <linux/init.h>
+#include <linux/irq.h>
+#include <linux/io.h>
+#include <linux/interrupt.h>
+#include <mach-se/mach/se7206.h>
+
+#define INTSTS0 0x31800000
+#define INTSTS1 0x31800002
+#define INTMSK0 0x31800004
+#define INTMSK1 0x31800006
+#define INTSEL  0x31800008
+
+#define IRQ0_IRQ 64
+#define IRQ1_IRQ 65
+#define IRQ3_IRQ 67
+
+#define INTC_IPR01 0xfffe0818
+#define INTC_ICR1  0xfffe0802
+
+static void disable_se7206_irq(unsigned int irq)
+{
+	unsigned short val;
+	unsigned short mask = 0xffff ^ (0x0f << 4 * (3 - (IRQ0_IRQ - irq)));
+	unsigned short msk0,msk1;
+
+	/* Set the priority in IPR to 0 */
+	val = ctrl_inw(INTC_IPR01);
+	val &= mask;
+	ctrl_outw(val, INTC_IPR01);
+	/* FPGA mask set */
+	msk0 = ctrl_inw(INTMSK0);
+	msk1 = ctrl_inw(INTMSK1);
+
+	switch (irq) {
+	case IRQ0_IRQ:
+		msk0 |= 0x0010;
+		break;
+	case IRQ1_IRQ:
+		msk0 |= 0x000f;
+		break;
+	case IRQ3_IRQ:
+		msk0 |= 0x0f00;
+		msk1 |= 0x00ff;
+		break;
+	}
+	ctrl_outw(msk0, INTMSK0);
+	ctrl_outw(msk1, INTMSK1);
+}
+
+static void enable_se7206_irq(unsigned int irq)
+{
+	unsigned short val;
+	unsigned short value = (0x0001 << 4 * (3 - (IRQ0_IRQ - irq)));
+	unsigned short msk0,msk1;
+
+	/* Set priority in IPR back to original value */
+	val = ctrl_inw(INTC_IPR01);
+	val |= value;
+	ctrl_outw(val, INTC_IPR01);
+
+	/* FPGA mask reset */
+	msk0 = ctrl_inw(INTMSK0);
+	msk1 = ctrl_inw(INTMSK1);
+
+	switch (irq) {
+	case IRQ0_IRQ:
+		msk0 &= ~0x0010;
+		break;
+	case IRQ1_IRQ:
+		msk0 &= ~0x000f;
+		break;
+	case IRQ3_IRQ:
+		msk0 &= ~0x0f00;
+		msk1 &= ~0x00ff;
+		break;
+	}
+	ctrl_outw(msk0, INTMSK0);
+	ctrl_outw(msk1, INTMSK1);
+}
+
+static void eoi_se7206_irq(unsigned int irq)
+{
+	unsigned short sts0,sts1;
+
+	if (!(irq_desc[irq].status & (IRQ_DISABLED|IRQ_INPROGRESS)))
+		enable_se7206_irq(irq);
+	/* FPGA isr clear */
+	sts0 = ctrl_inw(INTSTS0);
+	sts1 = ctrl_inw(INTSTS1);
+
+	switch (irq) {
+	case IRQ0_IRQ:
+		sts0 &= ~0x0010;
+		break;
+	case IRQ1_IRQ:
+		sts0 &= ~0x000f;
+		break;
+	case IRQ3_IRQ:
+		sts0 &= ~0x0f00;
+		sts1 &= ~0x00ff;
+		break;
+	}
+	ctrl_outw(sts0, INTSTS0);
+	ctrl_outw(sts1, INTSTS1);
+}
+
+static struct irq_chip se7206_irq_chip __read_mostly = {
+	.name		= "SE7206-FPGA",
+	.mask		= disable_se7206_irq,
+	.unmask		= enable_se7206_irq,
+	.mask_ack	= disable_se7206_irq,
+	.eoi		= eoi_se7206_irq,
+};
+
+static void make_se7206_irq(unsigned int irq)
+{
+	disable_irq_nosync(irq);
+	set_irq_chip_and_handler_name(irq, &se7206_irq_chip,
+				      handle_level_irq, "level");
+	disable_se7206_irq(irq);
+}
+
+/*
+ * Initialize IRQ setting
+ */
+void __init init_se7206_IRQ(void)
+{
+	make_se7206_irq(IRQ0_IRQ); /* SMC91C111 */
+	make_se7206_irq(IRQ1_IRQ); /* ATA */
+	make_se7206_irq(IRQ3_IRQ); /* SLOT / PCM */
+	ctrl_outw(inw(INTC_ICR1) | 0x000b ,INTC_ICR1 ) ; /* ICR1 */
+
+	/* FPGA System register setup*/
+	ctrl_outw(0x0000,INTSTS0); /* Clear INTSTS0 */
+	ctrl_outw(0x0000,INTSTS1); /* Clear INTSTS1 */
+	/* IRQ0=LAN, IRQ1=ATA, IRQ3=SLT,PCM */
+	ctrl_outw(0x0001,INTSEL);
+}
diff --git a/arch/sh/boards/mach-se/7206/setup.c b/arch/sh/boards/mach-se/7206/setup.c
new file mode 100644
index 000000000000..f5466384972e
--- /dev/null
+++ b/arch/sh/boards/mach-se/7206/setup.c
@@ -0,0 +1,108 @@
+/*
+ *
+ * linux/arch/sh/boards/se/7206/setup.c
+ *
+ * Copyright (C) 2006  Yoshinori Sato
+ * Copyright (C) 2007 - 2008  Paul Mundt
+ *
+ * Hitachi 7206 SolutionEngine Support.
+ */
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/smc91x.h>
+#include <mach-se/mach/se7206.h>
+#include <asm/io.h>
+#include <asm/machvec.h>
+#include <asm/heartbeat.h>
+
+static struct resource smc91x_resources[] = {
+	[0] = {
+		.name		= "smc91x-regs",
+		.start		= PA_SMSC + 0x300,
+		.end		= PA_SMSC + 0x300 + 0x020 - 1,
+		.flags		= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start		= 64,
+		.end		= 64,
+		.flags		= IORESOURCE_IRQ,
+	},
+};
+
+static struct smc91x_platdata smc91x_info = {
+	.flags	= SMC91X_USE_16BIT,
+};
+
+static struct platform_device smc91x_device = {
+	.name		= "smc91x",
+	.id		= -1,
+	.dev		= {
+		.dma_mask		= NULL,
+		.coherent_dma_mask	= 0xffffffff,
+		.platform_data		= &smc91x_info,
+	},
+	.num_resources	= ARRAY_SIZE(smc91x_resources),
+	.resource	= smc91x_resources,
+};
+
+static unsigned char heartbeat_bit_pos[] = { 8, 9, 10, 11, 12, 13, 14, 15 };
+
+static struct heartbeat_data heartbeat_data = {
+	.bit_pos	= heartbeat_bit_pos,
+	.nr_bits	= ARRAY_SIZE(heartbeat_bit_pos),
+	.regsize	= 32,
+};
+
+static struct resource heartbeat_resources[] = {
+	[0] = {
+		.start	= PA_LED,
+		.end	= PA_LED,
+		.flags	= IORESOURCE_MEM,
+	},
+};
+
+static struct platform_device heartbeat_device = {
+	.name		= "heartbeat",
+	.id		= -1,
+	.dev	= {
+		.platform_data	= &heartbeat_data,
+	},
+	.num_resources	= ARRAY_SIZE(heartbeat_resources),
+	.resource	= heartbeat_resources,
+};
+
+static struct platform_device *se7206_devices[] __initdata = {
+	&smc91x_device,
+	&heartbeat_device,
+};
+
+static int __init se7206_devices_setup(void)
+{
+	return platform_add_devices(se7206_devices, ARRAY_SIZE(se7206_devices));
+}
+__initcall(se7206_devices_setup);
+
+/*
+ * The Machine Vector
+ */
+
+static struct sh_machine_vector mv_se __initmv = {
+	.mv_name		= "SolutionEngine",
+	.mv_nr_irqs		= 256,
+	.mv_inb			= se7206_inb,
+	.mv_inw			= se7206_inw,
+	.mv_outb		= se7206_outb,
+	.mv_outw		= se7206_outw,
+
+	.mv_inb_p		= se7206_inb_p,
+	.mv_inw_p		= se7206_inw,
+	.mv_outb_p		= se7206_outb_p,
+	.mv_outw_p		= se7206_outw,
+
+	.mv_insb		= se7206_insb,
+	.mv_insw		= se7206_insw,
+	.mv_outsb		= se7206_outsb,
+	.mv_outsw		= se7206_outsw,
+
+	.mv_init_irq		= init_se7206_IRQ,
+};
diff --git a/arch/sh/boards/se/7343/Makefile b/arch/sh/boards/mach-se/7343/Makefile
index 3024796c6203..3024796c6203 100644
--- a/arch/sh/boards/se/7343/Makefile
+++ b/arch/sh/boards/mach-se/7343/Makefile
diff --git a/arch/sh/boards/mach-se/7343/io.c b/arch/sh/boards/mach-se/7343/io.c
new file mode 100644
index 000000000000..8741abc1da7b
--- /dev/null
+++ b/arch/sh/boards/mach-se/7343/io.c
@@ -0,0 +1,273 @@
+/*
+ * arch/sh/boards/se/7343/io.c
+ *
+ * I/O routine for SH-Mobile3AS 7343 SolutionEngine.
+ *
+ */
+#include <linux/kernel.h>
+#include <asm/io.h>
+#include <mach-se/mach/se7343.h>
+
+#define badio(fn, a) panic("bad i/o operation %s for %08lx.", #fn, a)
+
+struct iop {
+	unsigned long start, end;
+	unsigned long base;
+	struct iop *(*check) (struct iop * p, unsigned long port);
+	unsigned char (*inb) (struct iop * p, unsigned long port);
+	unsigned short (*inw) (struct iop * p, unsigned long port);
+	void (*outb) (struct iop * p, unsigned char value, unsigned long port);
+	void (*outw) (struct iop * p, unsigned short value, unsigned long port);
+};
+
+struct iop *
+simple_check(struct iop *p, unsigned long port)
+{
+	static int count;
+
+	if (count < 100)
+		count++;
+
+	port &= 0xFFFF;
+
+	if ((p->start <= port) && (port <= p->end))
+		return p;
+	else
+		badio(check, port);
+}
+
+struct iop *
+ide_check(struct iop *p, unsigned long port)
+{
+	if (((0x1f0 <= port) && (port <= 0x1f7)) || (port == 0x3f7))
+		return p;
+	return NULL;
+}
+
+unsigned char
+simple_inb(struct iop *p, unsigned long port)
+{
+	return *(unsigned char *) (p->base + port);
+}
+
+unsigned short
+simple_inw(struct iop *p, unsigned long port)
+{
+	return *(unsigned short *) (p->base + port);
+}
+
+void
+simple_outb(struct iop *p, unsigned char value, unsigned long port)
+{
+	*(unsigned char *) (p->base + port) = value;
+}
+
+void
+simple_outw(struct iop *p, unsigned short value, unsigned long port)
+{
+	*(unsigned short *) (p->base + port) = value;
+}
+
+unsigned char
+pcc_inb(struct iop *p, unsigned long port)
+{
+	unsigned long addr = p->base + port + 0x40000;
+	unsigned long v;
+
+	if (port & 1)
+		addr += 0x00400000;
+	v = *(volatile unsigned char *) addr;
+	return v;
+}
+
+void
+pcc_outb(struct iop *p, unsigned char value, unsigned long port)
+{
+	unsigned long addr = p->base + port + 0x40000;
+
+	if (port & 1)
+		addr += 0x00400000;
+	*(volatile unsigned char *) addr = value;
+}
+
+unsigned char
+bad_inb(struct iop *p, unsigned long port)
+{
+	badio(inb, port);
+}
+
+void
+bad_outb(struct iop *p, unsigned char value, unsigned long port)
+{
+	badio(inw, port);
+}
+
+#ifdef CONFIG_SMC91X
+/* MSTLANEX01 LAN at 0xb400:0000 */
+static struct iop laniop = {
+	.start = 0x00,
+	.end = 0x0F,
+	.base = 0x04000000,
+	.check = simple_check,
+	.inb = simple_inb,
+	.inw = simple_inw,
+	.outb = simple_outb,
+	.outw = simple_outw,
+};
+#endif
+
+#ifdef CONFIG_NE2000
+/* NE2000 pc card NIC */
+static struct iop neiop = {
+	.start = 0x280,
+	.end = 0x29f,
+	.base = 0xb0600000 + 0x80,	/* soft 0x280 -> hard 0x300 */
+	.check = simple_check,
+	.inb = pcc_inb,
+	.inw = simple_inw,
+	.outb = pcc_outb,
+	.outw = simple_outw,
+};
+#endif
+
+#ifdef CONFIG_IDE
+/* CF in CF slot */
+static struct iop cfiop = {
+	.base = 0xb0600000,
+	.check = ide_check,
+	.inb = pcc_inb,
+	.inw = simple_inw,
+	.outb = pcc_outb,
+	.outw = simple_outw,
+};
+#endif
+
+static __inline__ struct iop *
+port2iop(unsigned long port)
+{
+	if (0) ;
+#if defined(CONFIG_SMC91X)
+	else if (laniop.check(&laniop, port))
+		return &laniop;
+#endif
+#if defined(CONFIG_NE2000)
+	else if (neiop.check(&neiop, port))
+		return &neiop;
+#endif
+#if defined(CONFIG_IDE)
+	else if (cfiop.check(&cfiop, port))
+		return &cfiop;
+#endif
+	else
+		return NULL;
+}
+
+static inline void
+delay(void)
+{
+	ctrl_inw(0xac000000);
+	ctrl_inw(0xac000000);
+}
+
+unsigned char
+sh7343se_inb(unsigned long port)
+{
+	struct iop *p = port2iop(port);
+	return (p->inb) (p, port);
+}
+
+unsigned char
+sh7343se_inb_p(unsigned long port)
+{
+	unsigned char v = sh7343se_inb(port);
+	delay();
+	return v;
+}
+
+unsigned short
+sh7343se_inw(unsigned long port)
+{
+	struct iop *p = port2iop(port);
+	return (p->inw) (p, port);
+}
+
+unsigned int
+sh7343se_inl(unsigned long port)
+{
+	badio(inl, port);
+}
+
+void
+sh7343se_outb(unsigned char value, unsigned long port)
+{
+	struct iop *p = port2iop(port);
+	(p->outb) (p, value, port);
+}
+
+void
+sh7343se_outb_p(unsigned char value, unsigned long port)
+{
+	sh7343se_outb(value, port);
+	delay();
+}
+
+void
+sh7343se_outw(unsigned short value, unsigned long port)
+{
+	struct iop *p = port2iop(port);
+	(p->outw) (p, value, port);
+}
+
+void
+sh7343se_outl(unsigned int value, unsigned long port)
+{
+	badio(outl, port);
+}
+
+void
+sh7343se_insb(unsigned long port, void *addr, unsigned long count)
+{
+	unsigned char *a = addr;
+	struct iop *p = port2iop(port);
+	while (count--)
+		*a++ = (p->inb) (p, port);
+}
+
+void
+sh7343se_insw(unsigned long port, void *addr, unsigned long count)
+{
+	unsigned short *a = addr;
+	struct iop *p = port2iop(port);
+	while (count--)
+		*a++ = (p->inw) (p, port);
+}
+
+void
+sh7343se_insl(unsigned long port, void *addr, unsigned long count)
+{
+	badio(insl, port);
+}
+
+void
+sh7343se_outsb(unsigned long port, const void *addr, unsigned long count)
+{
+	unsigned char *a = (unsigned char *) addr;
+	struct iop *p = port2iop(port);
+	while (count--)
+		(p->outb) (p, *a++, port);
+}
+
+void
+sh7343se_outsw(unsigned long port, const void *addr, unsigned long count)
+{
+	unsigned short *a = (unsigned short *) addr;
+	struct iop *p = port2iop(port);
+	while (count--)
+		(p->outw) (p, *a++, port);
+}
+
+void
+sh7343se_outsl(unsigned long port, const void *addr, unsigned long count)
+{
+	badio(outsw, port);
+}
diff --git a/arch/sh/boards/mach-se/7343/irq.c b/arch/sh/boards/mach-se/7343/irq.c
new file mode 100644
index 000000000000..051c29d4eae0
--- /dev/null
+++ b/arch/sh/boards/mach-se/7343/irq.c
@@ -0,0 +1,79 @@
+/*
+ * linux/arch/sh/boards/se/7343/irq.c
+ *
+ * Copyright (C) 2008  Yoshihiro Shimoda
+ *
+ * Based on linux/arch/sh/boards/se/7722/irq.c
+ * Copyright (C) 2007  Nobuhiro Iwamatsu
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/init.h>
+#include <linux/irq.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <mach-se/mach/se7343.h>
+
+static void disable_se7343_irq(unsigned int irq)
+{
+	unsigned int bit = irq - SE7343_FPGA_IRQ_BASE;
+	ctrl_outw(ctrl_inw(PA_CPLD_IMSK) | 1 << bit, PA_CPLD_IMSK);
+}
+
+static void enable_se7343_irq(unsigned int irq)
+{
+	unsigned int bit = irq - SE7343_FPGA_IRQ_BASE;
+	ctrl_outw(ctrl_inw(PA_CPLD_IMSK) & ~(1 << bit), PA_CPLD_IMSK);
+}
+
+static struct irq_chip se7343_irq_chip __read_mostly = {
+	.name           = "SE7343-FPGA",
+	.mask           = disable_se7343_irq,
+	.unmask         = enable_se7343_irq,
+	.mask_ack       = disable_se7343_irq,
+};
+
+static void se7343_irq_demux(unsigned int irq, struct irq_desc *desc)
+{
+	unsigned short intv = ctrl_inw(PA_CPLD_ST);
+	struct irq_desc *ext_desc;
+	unsigned int ext_irq = SE7343_FPGA_IRQ_BASE;
+
+	intv &= (1 << SE7343_FPGA_IRQ_NR) - 1;
+
+	while (intv) {
+		if (intv & 1) {
+			ext_desc = irq_desc + ext_irq;
+			handle_level_irq(ext_irq, ext_desc);
+		}
+		intv >>= 1;
+		ext_irq++;
+	}
+}
+
+/*
+ * Initialize IRQ setting
+ */
+void __init init_7343se_IRQ(void)
+{
+	int i;
+
+	ctrl_outw(0, PA_CPLD_IMSK);	/* disable all irqs */
+	ctrl_outw(0x2000, 0xb03fffec);	/* mrshpc irq enable */
+
+	for (i = 0; i < SE7343_FPGA_IRQ_NR; i++)
+		set_irq_chip_and_handler_name(SE7343_FPGA_IRQ_BASE + i,
+					      &se7343_irq_chip,
+					      handle_level_irq, "level");
+
+	set_irq_chained_handler(IRQ0_IRQ, se7343_irq_demux);
+	set_irq_type(IRQ0_IRQ, IRQ_TYPE_LEVEL_LOW);
+	set_irq_chained_handler(IRQ1_IRQ, se7343_irq_demux);
+	set_irq_type(IRQ1_IRQ, IRQ_TYPE_LEVEL_LOW);
+	set_irq_chained_handler(IRQ4_IRQ, se7343_irq_demux);
+	set_irq_type(IRQ4_IRQ, IRQ_TYPE_LEVEL_LOW);
+	set_irq_chained_handler(IRQ5_IRQ, se7343_irq_demux);
+	set_irq_type(IRQ5_IRQ, IRQ_TYPE_LEVEL_LOW);
+}
diff --git a/arch/sh/boards/mach-se/7343/setup.c b/arch/sh/boards/mach-se/7343/setup.c
new file mode 100644
index 000000000000..486f40bf9274
--- /dev/null
+++ b/arch/sh/boards/mach-se/7343/setup.c
@@ -0,0 +1,152 @@
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/physmap.h>
+#include <asm/machvec.h>
+#include <mach-se/mach/se7343.h>
+#include <asm/heartbeat.h>
+#include <asm/irq.h>
+#include <asm/io.h>
+
+static struct resource smc91x_resources[] = {
+	[0] = {
+		.start	= 0x10000000,
+		.end	= 0x1000000F,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		/*
+		 * shared with other devices via externel
+		 * interrupt controller in FPGA...
+		 */
+		.start	= SMC_IRQ,
+		.end	= SMC_IRQ,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device smc91x_device = {
+	.name		= "smc91x",
+	.id		= 0,
+	.num_resources	= ARRAY_SIZE(smc91x_resources),
+	.resource	= smc91x_resources,
+};
+
+static struct resource heartbeat_resources[] = {
+	[0] = {
+		.start	= PA_LED,
+		.end	= PA_LED,
+		.flags	= IORESOURCE_MEM,
+	},
+};
+
+static struct heartbeat_data heartbeat_data = {
+	.regsize = 16,
+};
+
+static struct platform_device heartbeat_device = {
+	.name		= "heartbeat",
+	.id		= -1,
+	.dev = {
+		.platform_data = &heartbeat_data,
+	},
+	.num_resources	= ARRAY_SIZE(heartbeat_resources),
+	.resource	= heartbeat_resources,
+};
+
+static struct mtd_partition nor_flash_partitions[] = {
+	{
+		.name		= "loader",
+		.offset		= 0x00000000,
+		.size		= 128 * 1024,
+	},
+	{
+		.name		= "rootfs",
+		.offset		= MTDPART_OFS_APPEND,
+		.size		= 31 * 1024 * 1024,
+	},
+	{
+		.name		= "data",
+		.offset		= MTDPART_OFS_APPEND,
+		.size		= MTDPART_SIZ_FULL,
+	},
+};
+
+static struct physmap_flash_data nor_flash_data = {
+	.width		= 2,
+	.parts		= nor_flash_partitions,
+	.nr_parts	= ARRAY_SIZE(nor_flash_partitions),
+};
+
+static struct resource nor_flash_resources[] = {
+	[0]	= {
+		.start	= 0x00000000,
+		.end	= 0x01ffffff,
+		.flags	= IORESOURCE_MEM,
+	}
+};
+
+static struct platform_device nor_flash_device = {
+	.name		= "physmap-flash",
+	.dev		= {
+		.platform_data	= &nor_flash_data,
+	},
+	.num_resources	= ARRAY_SIZE(nor_flash_resources),
+	.resource	= nor_flash_resources,
+};
+
+static struct platform_device *sh7343se_platform_devices[] __initdata = {
+	&smc91x_device,
+	&heartbeat_device,
+	&nor_flash_device,
+};
+
+static int __init sh7343se_devices_setup(void)
+{
+	return platform_add_devices(sh7343se_platform_devices,
+				    ARRAY_SIZE(sh7343se_platform_devices));
+}
+device_initcall(sh7343se_devices_setup);
+
+/*
+ * Initialize the board
+ */
+static void __init sh7343se_setup(char **cmdline_p)
+{
+	ctrl_outw(0xf900, FPGA_OUT);	/* FPGA */
+
+	ctrl_outw(0x0002, PORT_PECR);	/* PORT E 1 = IRQ5 */
+	ctrl_outw(0x0020, PORT_PSELD);
+
+	printk(KERN_INFO "MS7343CP01 Setup...done\n");
+}
+
+/*
+ * The Machine Vector
+ */
+static struct sh_machine_vector mv_7343se __initmv = {
+	.mv_name = "SolutionEngine 7343",
+	.mv_setup = sh7343se_setup,
+	.mv_nr_irqs = 108,
+	.mv_inb = sh7343se_inb,
+	.mv_inw = sh7343se_inw,
+	.mv_inl = sh7343se_inl,
+	.mv_outb = sh7343se_outb,
+	.mv_outw = sh7343se_outw,
+	.mv_outl = sh7343se_outl,
+
+	.mv_inb_p = sh7343se_inb_p,
+	.mv_inw_p = sh7343se_inw,
+	.mv_inl_p = sh7343se_inl,
+	.mv_outb_p = sh7343se_outb_p,
+	.mv_outw_p = sh7343se_outw,
+	.mv_outl_p = sh7343se_outl,
+
+	.mv_insb = sh7343se_insb,
+	.mv_insw = sh7343se_insw,
+	.mv_insl = sh7343se_insl,
+	.mv_outsb = sh7343se_outsb,
+	.mv_outsw = sh7343se_outsw,
+	.mv_outsl = sh7343se_outsl,
+
+	.mv_init_irq = init_7343se_IRQ,
+};
diff --git a/arch/sh/boards/se/770x/Makefile b/arch/sh/boards/mach-se/770x/Makefile
index 8e624b06d5ea..8e624b06d5ea 100644
--- a/arch/sh/boards/se/770x/Makefile
+++ b/arch/sh/boards/mach-se/770x/Makefile
diff --git a/arch/sh/boards/mach-se/770x/io.c b/arch/sh/boards/mach-se/770x/io.c
new file mode 100644
index 000000000000..28833c8786ea
--- /dev/null
+++ b/arch/sh/boards/mach-se/770x/io.c
@@ -0,0 +1,156 @@
+/*
+ * Copyright (C) 2000  Kazumoto Kojima
+ *
+ * I/O routine for Hitachi SolutionEngine.
+ */
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <asm/io.h>
+#include <mach-se/mach/se.h>
+
+/* MS7750 requires special versions of in*, out* routines, since
+   PC-like io ports are located at upper half byte of 16-bit word which
+   can be accessed only with 16-bit wide.  */
+
+static inline volatile __u16 *
+port2adr(unsigned int port)
+{
+	if (port & 0xff000000)
+		return ( volatile __u16 *) port;
+	if (port >= 0x2000)
+		return (volatile __u16 *) (PA_MRSHPC + (port - 0x2000));
+	else if (port >= 0x1000)
+		return (volatile __u16 *) (PA_83902 + (port << 1));
+	else
+		return (volatile __u16 *) (PA_SUPERIO + (port << 1));
+}
+
+static inline int
+shifted_port(unsigned long port)
+{
+	/* For IDE registers, value is not shifted */
+	if ((0x1f0 <= port && port < 0x1f8) || port == 0x3f6)
+		return 0;
+	else
+		return 1;
+}
+
+unsigned char se_inb(unsigned long port)
+{
+	if (shifted_port(port))
+		return (*port2adr(port) >> 8);
+	else
+		return (*port2adr(port))&0xff;
+}
+
+unsigned char se_inb_p(unsigned long port)
+{
+	unsigned long v;
+
+	if (shifted_port(port))
+		v = (*port2adr(port) >> 8);
+	else
+		v = (*port2adr(port))&0xff;
+	ctrl_delay();
+	return v;
+}
+
+unsigned short se_inw(unsigned long port)
+{
+	if (port >= 0x2000)
+		return *port2adr(port);
+	else
+		maybebadio(port);
+	return 0;
+}
+
+unsigned int se_inl(unsigned long port)
+{
+	maybebadio(port);
+	return 0;
+}
+
+void se_outb(unsigned char value, unsigned long port)
+{
+	if (shifted_port(port))
+		*(port2adr(port)) = value << 8;
+	else
+		*(port2adr(port)) = value;
+}
+
+void se_outb_p(unsigned char value, unsigned long port)
+{
+	if (shifted_port(port))
+		*(port2adr(port)) = value << 8;
+	else
+		*(port2adr(port)) = value;
+	ctrl_delay();
+}
+
+void se_outw(unsigned short value, unsigned long port)
+{
+	if (port >= 0x2000)
+		*port2adr(port) = value;
+	else
+		maybebadio(port);
+}
+
+void se_outl(unsigned int value, unsigned long port)
+{
+	maybebadio(port);
+}
+
+void se_insb(unsigned long port, void *addr, unsigned long count)
+{
+	volatile __u16 *p = port2adr(port);
+	__u8 *ap = addr;
+
+	if (shifted_port(port)) {
+		while (count--)
+			*ap++ = *p >> 8;
+	} else {
+		while (count--)
+			*ap++ = *p;
+	}
+}
+
+void se_insw(unsigned long port, void *addr, unsigned long count)
+{
+	volatile __u16 *p = port2adr(port);
+	__u16 *ap = addr;
+	while (count--)
+		*ap++ = *p;
+}
+
+void se_insl(unsigned long port, void *addr, unsigned long count)
+{
+	maybebadio(port);
+}
+
+void se_outsb(unsigned long port, const void *addr, unsigned long count)
+{
+	volatile __u16 *p = port2adr(port);
+	const __u8 *ap = addr;
+
+	if (shifted_port(port)) {
+		while (count--)
+			*p = *ap++ << 8;
+	} else {
+		while (count--)
+			*p = *ap++;
+	}
+}
+
+void se_outsw(unsigned long port, const void *addr, unsigned long count)
+{
+	volatile __u16 *p = port2adr(port);
+	const __u16 *ap = addr;
+
+	while (count--)
+		*p = *ap++;
+}
+
+void se_outsl(unsigned long port, const void *addr, unsigned long count)
+{
+	maybebadio(port);
+}
diff --git a/arch/sh/boards/mach-se/770x/irq.c b/arch/sh/boards/mach-se/770x/irq.c
new file mode 100644
index 000000000000..ec1fea571b52
--- /dev/null
+++ b/arch/sh/boards/mach-se/770x/irq.c
@@ -0,0 +1,108 @@
+/*
+ * linux/arch/sh/boards/se/770x/irq.c
+ *
+ * Copyright (C) 2000  Kazumoto Kojima
+ * Copyright (C) 2006  Nobuhiro Iwamatsu
+ *
+ * Hitachi SolutionEngine Support.
+ *
+ */
+
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <asm/irq.h>
+#include <asm/io.h>
+#include <mach-se/mach/se.h>
+
+static struct ipr_data ipr_irq_table[] = {
+	/*
+	* Super I/O (Just mimic PC):
+	*  1: keyboard
+	*  3: serial 0
+	*  4: serial 1
+	*  5: printer
+	*  6: floppy
+	*  8: rtc
+	* 12: mouse
+	* 14: ide0
+	*/
+#if defined(CONFIG_CPU_SUBTYPE_SH7705)
+	/* This is default value */
+	{ 13, 0, 8,  0x0f-13, },
+	{ 5 , 0, 4,  0x0f- 5, },
+	{ 10, 1, 0,  0x0f-10, },
+	{ 7 , 2, 4,  0x0f- 7, },
+	{ 3 , 2, 0,  0x0f- 3, },
+	{ 1 , 3, 12, 0x0f- 1, },
+	{ 12, 3, 4,  0x0f-12, }, /* LAN */
+	{ 2 , 4, 8,  0x0f- 2, }, /* PCIRQ2 */
+	{ 6 , 4, 4,  0x0f- 6, }, /* PCIRQ1 */
+	{ 14, 4, 0,  0x0f-14, }, /* PCIRQ0 */
+	{ 0 , 5, 12, 0x0f   , }, 
+	{ 4 , 5, 4,  0x0f- 4, },
+	{ 8 , 6, 12, 0x0f- 8, },
+	{ 9 , 6, 8,  0x0f- 9, },
+	{ 11, 6, 4,  0x0f-11, },
+#else
+	{ 14, 0,  8, 0x0f-14, },
+	{ 12, 0,  4, 0x0f-12, },
+	{  8, 1,  4, 0x0f- 8, },
+	{  6, 2, 12, 0x0f- 6, },
+	{  5, 2,  8, 0x0f- 5, },
+	{  4, 2,  4, 0x0f- 4, },
+	{  3, 2,  0, 0x0f- 3, },
+	{  1, 3, 12, 0x0f- 1, },
+#if defined(CONFIG_STNIC)
+	/* ST NIC */
+	{ 10, 3,  4, 0x0f-10, }, 	/* LAN */
+#endif
+	/* MRSHPC IRQs setting */
+	{  0, 4, 12, 0x0f- 0, },	/* PCIRQ3 */
+	{ 11, 4,  8, 0x0f-11, }, 	/* PCIRQ2 */
+	{  9, 4,  4, 0x0f- 9, }, 	/* PCIRQ1 */
+	{  7, 4,  0, 0x0f- 7, }, 	/* PCIRQ0 */
+	/* #2, #13 are allocated for SLOT IRQ #1 and #2 (for now) */
+	/* NOTE: #2 and #13 are not used on PC */
+	{ 13, 6,  4, 0x0f-13, }, 	/* SLOTIRQ2 */
+	{  2, 6,  0, 0x0f- 2, }, 	/* SLOTIRQ1 */
+#endif
+};
+
+static unsigned long ipr_offsets[] = {
+	BCR_ILCRA,
+	BCR_ILCRB,
+	BCR_ILCRC,
+	BCR_ILCRD,
+	BCR_ILCRE,
+	BCR_ILCRF,
+	BCR_ILCRG,
+};
+
+static struct ipr_desc ipr_irq_desc = {
+	.ipr_offsets	= ipr_offsets,
+	.nr_offsets	= ARRAY_SIZE(ipr_offsets),
+
+	.ipr_data	= ipr_irq_table,
+	.nr_irqs	= ARRAY_SIZE(ipr_irq_table),
+	.chip = {
+		.name	= "IPR-se770x",
+	},
+};
+
+/*
+ * Initialize IRQ setting
+ */
+void __init init_se_IRQ(void)
+{
+	/* Disable all interrupts */
+	ctrl_outw(0, BCR_ILCRA);
+	ctrl_outw(0, BCR_ILCRB);
+	ctrl_outw(0, BCR_ILCRC);
+	ctrl_outw(0, BCR_ILCRD);
+	ctrl_outw(0, BCR_ILCRE);
+	ctrl_outw(0, BCR_ILCRF);
+	ctrl_outw(0, BCR_ILCRG);
+
+	register_ipr_controller(&ipr_irq_desc);
+}
diff --git a/arch/sh/boards/mach-se/770x/setup.c b/arch/sh/boards/mach-se/770x/setup.c
new file mode 100644
index 000000000000..9123d9687bf7
--- /dev/null
+++ b/arch/sh/boards/mach-se/770x/setup.c
@@ -0,0 +1,222 @@
+/*
+ * linux/arch/sh/boards/se/770x/setup.c
+ *
+ * Copyright (C) 2000  Kazumoto Kojima
+ *
+ * Hitachi SolutionEngine Support.
+ *
+ */
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <asm/machvec.h>
+#include <mach-se/mach/se.h>
+#include <asm/io.h>
+#include <asm/smc37c93x.h>
+#include <asm/heartbeat.h>
+
+/*
+ * Configure the Super I/O chip
+ */
+static void __init smsc_config(int index, int data)
+{
+	outb_p(index, INDEX_PORT);
+	outb_p(data, DATA_PORT);
+}
+
+/* XXX: Another candidate for a more generic cchip machine vector */
+static void __init smsc_setup(char **cmdline_p)
+{
+	outb_p(CONFIG_ENTER, CONFIG_PORT);
+	outb_p(CONFIG_ENTER, CONFIG_PORT);
+
+	/* FDC */
+	smsc_config(CURRENT_LDN_INDEX, LDN_FDC);
+	smsc_config(ACTIVATE_INDEX, 0x01);
+	smsc_config(IRQ_SELECT_INDEX, 6); /* IRQ6 */
+
+	/* AUXIO (GPIO): to use IDE1 */
+	smsc_config(CURRENT_LDN_INDEX, LDN_AUXIO);
+	smsc_config(GPIO46_INDEX, 0x00); /* nIOROP */
+	smsc_config(GPIO47_INDEX, 0x00); /* nIOWOP */
+
+	/* COM1 */
+	smsc_config(CURRENT_LDN_INDEX, LDN_COM1);
+	smsc_config(ACTIVATE_INDEX, 0x01);
+	smsc_config(IO_BASE_HI_INDEX, 0x03);
+	smsc_config(IO_BASE_LO_INDEX, 0xf8);
+	smsc_config(IRQ_SELECT_INDEX, 4); /* IRQ4 */
+
+	/* COM2 */
+	smsc_config(CURRENT_LDN_INDEX, LDN_COM2);
+	smsc_config(ACTIVATE_INDEX, 0x01);
+	smsc_config(IO_BASE_HI_INDEX, 0x02);
+	smsc_config(IO_BASE_LO_INDEX, 0xf8);
+	smsc_config(IRQ_SELECT_INDEX, 3); /* IRQ3 */
+
+	/* RTC */
+	smsc_config(CURRENT_LDN_INDEX, LDN_RTC);
+	smsc_config(ACTIVATE_INDEX, 0x01);
+	smsc_config(IRQ_SELECT_INDEX, 8); /* IRQ8 */
+
+	/* XXX: PARPORT, KBD, and MOUSE will come here... */
+	outb_p(CONFIG_EXIT, CONFIG_PORT);
+}
+
+
+static struct resource cf_ide_resources[] = {
+	[0] = {
+		.start  = PA_MRSHPC_IO + 0x1f0,
+		.end    = PA_MRSHPC_IO + 0x1f0 + 8,
+		.flags  = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start  = PA_MRSHPC_IO + 0x1f0 + 0x206,
+		.end    = PA_MRSHPC_IO + 0x1f0 + 8 + 0x206 + 8,
+		.flags  = IORESOURCE_MEM,
+	},
+	[2] = {
+		.start  = IRQ_CFCARD,
+		.flags  = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device cf_ide_device  = {
+	.name           = "pata_platform",
+	.id             = -1,
+	.num_resources  = ARRAY_SIZE(cf_ide_resources),
+	.resource       = cf_ide_resources,
+};
+
+static unsigned char heartbeat_bit_pos[] = { 8, 9, 10, 11, 12, 13, 14, 15 };
+
+static struct heartbeat_data heartbeat_data = {
+	.bit_pos	= heartbeat_bit_pos,
+	.nr_bits	= ARRAY_SIZE(heartbeat_bit_pos),
+	.regsize	= 16,
+};
+
+static struct resource heartbeat_resources[] = {
+	[0] = {
+		.start	= PA_LED,
+		.end	= PA_LED,
+		.flags	= IORESOURCE_MEM,
+	},
+};
+
+static struct platform_device heartbeat_device = {
+	.name		= "heartbeat",
+	.id		= -1,
+	.dev	= {
+		.platform_data	= &heartbeat_data,
+	},
+	.num_resources	= ARRAY_SIZE(heartbeat_resources),
+	.resource	= heartbeat_resources,
+};
+
+#if defined(CONFIG_CPU_SUBTYPE_SH7710) ||\
+	defined(CONFIG_CPU_SUBTYPE_SH7712)
+/* SH771X Ethernet driver */
+static struct resource sh_eth0_resources[] = {
+	[0] = {
+		.start = SH_ETH0_BASE,
+		.end = SH_ETH0_BASE + 0x1B8,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = SH_ETH0_IRQ,
+		.end = SH_ETH0_IRQ,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device sh_eth0_device = {
+	.name = "sh-eth",
+	.id	= 0,
+	.dev = {
+		.platform_data = PHY_ID,
+	},
+	.num_resources = ARRAY_SIZE(sh_eth0_resources),
+	.resource = sh_eth0_resources,
+};
+
+static struct resource sh_eth1_resources[] = {
+	[0] = {
+		.start = SH_ETH1_BASE,
+		.end = SH_ETH1_BASE + 0x1B8,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = SH_ETH1_IRQ,
+		.end = SH_ETH1_IRQ,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device sh_eth1_device = {
+	.name = "sh-eth",
+	.id	= 1,
+	.dev = {
+		.platform_data = PHY_ID,
+	},
+	.num_resources = ARRAY_SIZE(sh_eth1_resources),
+	.resource = sh_eth1_resources,
+};
+#endif
+
+static struct platform_device *se_devices[] __initdata = {
+	&heartbeat_device,
+	&cf_ide_device,
+#if defined(CONFIG_CPU_SUBTYPE_SH7710) ||\
+	defined(CONFIG_CPU_SUBTYPE_SH7712)
+	&sh_eth0_device,
+	&sh_eth1_device,
+#endif
+};
+
+static int __init se_devices_setup(void)
+{
+	return platform_add_devices(se_devices, ARRAY_SIZE(se_devices));
+}
+device_initcall(se_devices_setup);
+
+/*
+ * The Machine Vector
+ */
+static struct sh_machine_vector mv_se __initmv = {
+	.mv_name		= "SolutionEngine",
+	.mv_setup		= smsc_setup,
+#if defined(CONFIG_CPU_SH4)
+	.mv_nr_irqs		= 48,
+#elif defined(CONFIG_CPU_SUBTYPE_SH7708)
+	.mv_nr_irqs		= 32,
+#elif defined(CONFIG_CPU_SUBTYPE_SH7709)
+	.mv_nr_irqs		= 61,
+#elif defined(CONFIG_CPU_SUBTYPE_SH7705)
+	.mv_nr_irqs		= 86,
+#elif defined(CONFIG_CPU_SUBTYPE_SH7710) || defined(CONFIG_CPU_SUBTYPE_SH7712)
+	.mv_nr_irqs             = 104,
+#endif
+
+	.mv_inb			= se_inb,
+	.mv_inw			= se_inw,
+	.mv_inl			= se_inl,
+	.mv_outb		= se_outb,
+	.mv_outw		= se_outw,
+	.mv_outl		= se_outl,
+
+	.mv_inb_p		= se_inb_p,
+	.mv_inw_p		= se_inw,
+	.mv_inl_p		= se_inl,
+	.mv_outb_p		= se_outb_p,
+	.mv_outw_p		= se_outw,
+	.mv_outl_p		= se_outl,
+
+	.mv_insb		= se_insb,
+	.mv_insw		= se_insw,
+	.mv_insl		= se_insl,
+	.mv_outsb		= se_outsb,
+	.mv_outsw		= se_outsw,
+	.mv_outsl		= se_outsl,
+
+	.mv_init_irq		= init_se_IRQ,
+};
diff --git a/arch/sh/boards/se/7721/Makefile b/arch/sh/boards/mach-se/7721/Makefile
index 7f09030980b3..7f09030980b3 100644
--- a/arch/sh/boards/se/7721/Makefile
+++ b/arch/sh/boards/mach-se/7721/Makefile
diff --git a/arch/sh/boards/mach-se/7721/irq.c b/arch/sh/boards/mach-se/7721/irq.c
new file mode 100644
index 000000000000..b417acc4dad0
--- /dev/null
+++ b/arch/sh/boards/mach-se/7721/irq.c
@@ -0,0 +1,45 @@
+/*
+ * linux/arch/sh/boards/se/7721/irq.c
+ *
+ * Copyright (C) 2008  Renesas Solutions Corp.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/init.h>
+#include <linux/irq.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <mach-se/mach/se7721.h>
+
+enum {
+	UNUSED = 0,
+
+	/* board specific interrupt sources */
+	MRSHPC,
+};
+
+static struct intc_vect vectors[] __initdata = {
+	INTC_IRQ(MRSHPC, MRSHPC_IRQ0),
+};
+
+static struct intc_prio_reg prio_registers[] __initdata = {
+	{ FPGA_ILSR6, 0, 8, 4, /* IRLMSK */
+	  { 0, MRSHPC } },
+};
+
+static DECLARE_INTC_DESC(intc_desc, "SE7721", vectors,
+			 NULL, NULL, prio_registers, NULL);
+
+/*
+ * Initialize IRQ setting
+ */
+void __init init_se7721_IRQ(void)
+{
+	/* PPCR */
+	ctrl_outw(ctrl_inw(0xa4050118) & ~0x00ff, 0xa4050118);
+
+	register_intc_controller(&intc_desc);
+	intc_set_priority(MRSHPC_IRQ0, 0xf - MRSHPC_IRQ0);
+}
diff --git a/arch/sh/boards/mach-se/7721/setup.c b/arch/sh/boards/mach-se/7721/setup.c
new file mode 100644
index 000000000000..d3fc80ff4d83
--- /dev/null
+++ b/arch/sh/boards/mach-se/7721/setup.c
@@ -0,0 +1,99 @@
+/*
+ * linux/arch/sh/boards/se/7721/setup.c
+ *
+ * Copyright (C) 2008 Renesas Solutions Corp.
+ *
+ * Hitachi UL SolutionEngine 7721 Support.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ */
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <asm/machvec.h>
+#include <mach-se/mach/se7721.h>
+#include <asm/io.h>
+#include <asm/heartbeat.h>
+
+static unsigned char heartbeat_bit_pos[] = { 8, 9, 10, 11, 12, 13, 14, 15 };
+
+static struct heartbeat_data heartbeat_data = {
+	.bit_pos	= heartbeat_bit_pos,
+	.nr_bits	= ARRAY_SIZE(heartbeat_bit_pos),
+	.regsize	= 16,
+};
+
+static struct resource heartbeat_resources[] = {
+	[0] = {
+		.start	= PA_LED,
+		.end	= PA_LED,
+		.flags	= IORESOURCE_MEM,
+	},
+};
+
+static struct platform_device heartbeat_device = {
+	.name		= "heartbeat",
+	.id		= -1,
+	.dev	= {
+		.platform_data	= &heartbeat_data,
+	},
+	.num_resources	= ARRAY_SIZE(heartbeat_resources),
+	.resource	= heartbeat_resources,
+};
+
+static struct resource cf_ide_resources[] = {
+	[0] = {
+		.start	= PA_MRSHPC_IO + 0x1f0,
+		.end	= PA_MRSHPC_IO + 0x1f0 + 8 ,
+		.flags	= IORESOURCE_IO,
+	},
+	[1] = {
+		.start	= PA_MRSHPC_IO + 0x1f0 + 0x206,
+		.end	= PA_MRSHPC_IO + 0x1f0 + 8 + 0x206 + 8,
+		.flags	= IORESOURCE_IO,
+	},
+	[2] = {
+		.start  = MRSHPC_IRQ0,
+		.flags  = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device cf_ide_device = {
+	.name		= "pata_platform",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(cf_ide_resources),
+	.resource	= cf_ide_resources,
+};
+
+static struct platform_device *se7721_devices[] __initdata = {
+	&cf_ide_device,
+	&heartbeat_device
+};
+
+static int __init se7721_devices_setup(void)
+{
+	return platform_add_devices(se7721_devices,
+		ARRAY_SIZE(se7721_devices));
+}
+device_initcall(se7721_devices_setup);
+
+static void __init se7721_setup(char **cmdline_p)
+{
+	/* for USB */
+	ctrl_outw(0x0000, 0xA405010C);	/* PGCR */
+	ctrl_outw(0x0000, 0xA405010E);	/* PHCR */
+	ctrl_outw(0x00AA, 0xA4050118);	/* PPCR */
+	ctrl_outw(0x0000, 0xA4050124);	/* PSELA */
+}
+
+/*
+ * The Machine Vector
+ */
+struct sh_machine_vector mv_se7721 __initmv = {
+	.mv_name		= "Solution Engine 7721",
+	.mv_setup		= se7721_setup,
+	.mv_nr_irqs		= 109,
+	.mv_init_irq		= init_se7721_IRQ,
+};
diff --git a/arch/sh/boards/se/7722/Makefile b/arch/sh/boards/mach-se/7722/Makefile
index 8694373389e5..8694373389e5 100644
--- a/arch/sh/boards/se/7722/Makefile
+++ b/arch/sh/boards/mach-se/7722/Makefile
diff --git a/arch/sh/boards/mach-se/7722/irq.c b/arch/sh/boards/mach-se/7722/irq.c
new file mode 100644
index 000000000000..02d21a3e2a8f
--- /dev/null
+++ b/arch/sh/boards/mach-se/7722/irq.c
@@ -0,0 +1,76 @@
+/*
+ * linux/arch/sh/boards/se/7722/irq.c
+ *
+ * Copyright (C) 2007  Nobuhiro Iwamatsu
+ *
+ * Hitachi UL SolutionEngine 7722 Support.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/init.h>
+#include <linux/irq.h>
+#include <linux/interrupt.h>
+#include <asm/irq.h>
+#include <asm/io.h>
+#include <mach-se/mach/se7722.h>
+
+static void disable_se7722_irq(unsigned int irq)
+{
+	unsigned int bit = irq - SE7722_FPGA_IRQ_BASE;
+	ctrl_outw(ctrl_inw(IRQ01_MASK) | 1 << bit, IRQ01_MASK);
+}
+
+static void enable_se7722_irq(unsigned int irq)
+{
+	unsigned int bit = irq - SE7722_FPGA_IRQ_BASE;
+	ctrl_outw(ctrl_inw(IRQ01_MASK) & ~(1 << bit), IRQ01_MASK);
+}
+
+static struct irq_chip se7722_irq_chip __read_mostly = {
+	.name           = "SE7722-FPGA",
+	.mask           = disable_se7722_irq,
+	.unmask         = enable_se7722_irq,
+	.mask_ack       = disable_se7722_irq,
+};
+
+static void se7722_irq_demux(unsigned int irq, struct irq_desc *desc)
+{
+	unsigned short intv = ctrl_inw(IRQ01_STS);
+	struct irq_desc *ext_desc;
+	unsigned int ext_irq = SE7722_FPGA_IRQ_BASE;
+
+	intv &= (1 << SE7722_FPGA_IRQ_NR) - 1;
+
+	while (intv) {
+		if (intv & 1) {
+			ext_desc = irq_desc + ext_irq;
+			handle_level_irq(ext_irq, ext_desc);
+		}
+		intv >>= 1;
+		ext_irq++;
+	}
+}
+
+/*
+ * Initialize IRQ setting
+ */
+void __init init_se7722_IRQ(void)
+{
+	int i;
+
+	ctrl_outw(0, IRQ01_MASK);       /* disable all irqs */
+	ctrl_outw(0x2000, 0xb03fffec);  /* mrshpc irq enable */
+
+	for (i = 0; i < SE7722_FPGA_IRQ_NR; i++)
+		set_irq_chip_and_handler_name(SE7722_FPGA_IRQ_BASE + i,
+					      &se7722_irq_chip,
+					      handle_level_irq, "level");
+
+	set_irq_chained_handler(IRQ0_IRQ, se7722_irq_demux);
+	set_irq_type(IRQ0_IRQ, IRQ_TYPE_LEVEL_LOW);
+
+	set_irq_chained_handler(IRQ1_IRQ, se7722_irq_demux);
+	set_irq_type(IRQ1_IRQ, IRQ_TYPE_LEVEL_LOW);
+}
diff --git a/arch/sh/boards/mach-se/7722/setup.c b/arch/sh/boards/mach-se/7722/setup.c
new file mode 100644
index 000000000000..fe6f96517e12
--- /dev/null
+++ b/arch/sh/boards/mach-se/7722/setup.c
@@ -0,0 +1,194 @@
+/*
+ * linux/arch/sh/boards/se/7722/setup.c
+ *
+ * Copyright (C) 2007 Nobuhiro Iwamatsu
+ *
+ * Hitachi UL SolutionEngine 7722 Support.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ */
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/ata_platform.h>
+#include <linux/input.h>
+#include <linux/smc91x.h>
+#include <asm/machvec.h>
+#include <asm/clock.h>
+#include <mach-se/mach/se7722.h>
+#include <asm/io.h>
+#include <asm/heartbeat.h>
+#include <asm/sh_keysc.h>
+
+/* Heartbeat */
+static struct heartbeat_data heartbeat_data = {
+	.regsize = 16,
+};
+
+static struct resource heartbeat_resources[] = {
+	[0] = {
+		.start  = PA_LED,
+		.end    = PA_LED,
+		.flags  = IORESOURCE_MEM,
+	},
+};
+
+static struct platform_device heartbeat_device = {
+	.name           = "heartbeat",
+	.id             = -1,
+	.dev = {
+		.platform_data = &heartbeat_data,
+	},
+	.num_resources  = ARRAY_SIZE(heartbeat_resources),
+	.resource       = heartbeat_resources,
+};
+
+/* SMC91x */
+static struct smc91x_platdata smc91x_info = {
+	.flags = SMC91X_USE_16BIT,
+};
+
+static struct resource smc91x_eth_resources[] = {
+	[0] = {
+		.name   = "smc91x-regs" ,
+		.start  = PA_LAN + 0x300,
+		.end    = PA_LAN + 0x300 + 0x10 ,
+		.flags  = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start  = SMC_IRQ,
+		.end    = SMC_IRQ,
+		.flags  = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device smc91x_eth_device = {
+	.name           = "smc91x",
+	.id             = 0,
+	.dev = {
+		.dma_mask               = NULL,         /* don't use dma */
+		.coherent_dma_mask      = 0xffffffff,
+		.platform_data	= &smc91x_info,
+	},
+	.num_resources  = ARRAY_SIZE(smc91x_eth_resources),
+	.resource       = smc91x_eth_resources,
+};
+
+static struct resource cf_ide_resources[] = {
+	[0] = {
+		.start  = PA_MRSHPC_IO + 0x1f0,
+		.end    = PA_MRSHPC_IO + 0x1f0 + 8 ,
+		.flags  = IORESOURCE_IO,
+	},
+	[1] = {
+		.start  = PA_MRSHPC_IO + 0x1f0 + 0x206,
+		.end    = PA_MRSHPC_IO + 0x1f0 +8 + 0x206 + 8,
+		.flags  = IORESOURCE_IO,
+	},
+	[2] = {
+		.start  = MRSHPC_IRQ0,
+		.end    = MRSHPC_IRQ0,
+		.flags  = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device cf_ide_device  = {
+	.name           = "pata_platform",
+	.id             = -1,
+	.num_resources  = ARRAY_SIZE(cf_ide_resources),
+	.resource       = cf_ide_resources,
+};
+
+static struct sh_keysc_info sh_keysc_info = {
+	.mode = SH_KEYSC_MODE_1, /* KEYOUT0->5, KEYIN0->4 */
+	.scan_timing = 3,
+	.delay = 5,
+	.keycodes = { /* SW1 -> SW30 */
+		KEY_A, KEY_B, KEY_C, KEY_D, KEY_E,
+		KEY_F, KEY_G, KEY_H, KEY_I, KEY_J,
+		KEY_K, KEY_L, KEY_M, KEY_N, KEY_O,
+		KEY_P, KEY_Q, KEY_R, KEY_S, KEY_T,
+		KEY_U, KEY_V, KEY_W, KEY_X, KEY_Y,
+		KEY_Z,
+		KEY_HOME, KEY_SLEEP, KEY_WAKEUP, KEY_COFFEE, /* life */
+	},
+};
+
+static struct resource sh_keysc_resources[] = {
+	[0] = {
+		.start  = 0x044b0000,
+		.end    = 0x044b000f,
+		.flags  = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start  = 79,
+		.flags  = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device sh_keysc_device = {
+	.name           = "sh_keysc",
+	.num_resources  = ARRAY_SIZE(sh_keysc_resources),
+	.resource       = sh_keysc_resources,
+	.dev	= {
+		.platform_data	= &sh_keysc_info,
+	},
+};
+
+static struct platform_device *se7722_devices[] __initdata = {
+	&heartbeat_device,
+	&smc91x_eth_device,
+	&cf_ide_device,
+	&sh_keysc_device,
+};
+
+static int __init se7722_devices_setup(void)
+{
+	clk_always_enable("mstp214"); /* KEYSC */
+
+	return platform_add_devices(se7722_devices,
+		ARRAY_SIZE(se7722_devices));
+}
+device_initcall(se7722_devices_setup);
+
+static void __init se7722_setup(char **cmdline_p)
+{
+	ctrl_outw(0x010D, FPGA_OUT);    /* FPGA */
+
+	ctrl_outw(0x0000, PORT_PECR);   /* PORT E 1 = IRQ5 ,E 0 = BS */
+	ctrl_outw(0x1000, PORT_PJCR);   /* PORT J 1 = IRQ1,J 0 =IRQ0 */
+
+	/* LCDC I/O */
+	ctrl_outw(0x0020, PORT_PSELD);
+
+	/* SIOF1*/
+	ctrl_outw(0x0003, PORT_PSELB);
+	ctrl_outw(0xe000, PORT_PSELC);
+	ctrl_outw(0x0000, PORT_PKCR);
+
+	/* LCDC */
+	ctrl_outw(0x4020, PORT_PHCR);
+	ctrl_outw(0x0000, PORT_PLCR);
+	ctrl_outw(0x0000, PORT_PMCR);
+	ctrl_outw(0x0002, PORT_PRCR);
+	ctrl_outw(0x0000, PORT_PXCR);   /* LCDC,CS6A */
+
+	/* KEYSC */
+	ctrl_outw(0x0A10, PORT_PSELA); /* BS,SHHID2 */
+	ctrl_outw(0x0000, PORT_PYCR);
+	ctrl_outw(0x0000, PORT_PZCR);
+	ctrl_outw(ctrl_inw(PORT_HIZCRA) & ~0x4000, PORT_HIZCRA);
+	ctrl_outw(ctrl_inw(PORT_HIZCRC) & ~0xc000, PORT_HIZCRC);
+}
+
+/*
+ * The Machine Vector
+ */
+static struct sh_machine_vector mv_se7722 __initmv = {
+	.mv_name                = "Solution Engine 7722" ,
+	.mv_setup               = se7722_setup ,
+	.mv_nr_irqs		= SE7722_FPGA_IRQ_BASE + SE7722_FPGA_IRQ_NR,
+	.mv_init_irq		= init_se7722_IRQ,
+};
diff --git a/arch/sh/boards/se/7751/Makefile b/arch/sh/boards/mach-se/7751/Makefile
index dbc29f3a9de5..dbc29f3a9de5 100644
--- a/arch/sh/boards/se/7751/Makefile
+++ b/arch/sh/boards/mach-se/7751/Makefile
diff --git a/arch/sh/boards/mach-se/7751/io.c b/arch/sh/boards/mach-se/7751/io.c
new file mode 100644
index 000000000000..6287ae570319
--- /dev/null
+++ b/arch/sh/boards/mach-se/7751/io.c
@@ -0,0 +1,135 @@
+/*
+ * Copyright (C) 2001  Ian da Silva, Jeremy Siegel
+ * Based largely on io_se.c.
+ *
+ * I/O routine for Hitachi 7751 SolutionEngine.
+ *
+ * Initial version only to support LAN access; some
+ * placeholder code from io_se.c left in with the
+ * expectation of later SuperIO and PCMCIA access.
+ */
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/pci.h>
+#include <asm/io.h>
+#include <mach-se/mach/se7751.h>
+#include <asm/addrspace.h>
+
+static inline volatile u16 *port2adr(unsigned int port)
+{
+	if (port >= 0x2000)
+		return (volatile __u16 *) (PA_MRSHPC + (port - 0x2000));
+	maybebadio((unsigned long)port);
+	return (volatile __u16*)port;
+}
+
+/*
+ * General outline: remap really low stuff [eventually] to SuperIO,
+ * stuff in PCI IO space (at or above window at pci.h:PCIBIOS_MIN_IO)
+ * is mapped through the PCI IO window.  Stuff with high bits (PXSEG)
+ * should be way beyond the window, and is used  w/o translation for
+ * compatibility.
+ */
+unsigned char sh7751se_inb(unsigned long port)
+{
+	if (PXSEG(port))
+		return *(volatile unsigned char *)port;
+	else if (is_pci_ioaddr(port))
+		return *(volatile unsigned char *)pci_ioaddr(port);
+	else
+		return (*port2adr(port)) & 0xff;
+}
+
+unsigned char sh7751se_inb_p(unsigned long port)
+{
+	unsigned char v;
+
+        if (PXSEG(port))
+                v = *(volatile unsigned char *)port;
+	else if (is_pci_ioaddr(port))
+                v = *(volatile unsigned char *)pci_ioaddr(port);
+	else
+		v = (*port2adr(port)) & 0xff;
+	ctrl_delay();
+	return v;
+}
+
+unsigned short sh7751se_inw(unsigned long port)
+{
+        if (PXSEG(port))
+                return *(volatile unsigned short *)port;
+	else if (is_pci_ioaddr(port))
+                return *(volatile unsigned short *)pci_ioaddr(port);
+	else if (port >= 0x2000)
+		return *port2adr(port);
+	else
+		maybebadio(port);
+	return 0;
+}
+
+unsigned int sh7751se_inl(unsigned long port)
+{
+        if (PXSEG(port))
+                return *(volatile unsigned long *)port;
+	else if (is_pci_ioaddr(port))
+                return *(volatile unsigned int *)pci_ioaddr(port);
+	else if (port >= 0x2000)
+		return *port2adr(port);
+	else
+		maybebadio(port);
+	return 0;
+}
+
+void sh7751se_outb(unsigned char value, unsigned long port)
+{
+
+        if (PXSEG(port))
+                *(volatile unsigned char *)port = value;
+	else if (is_pci_ioaddr(port))
+		*((unsigned char*)pci_ioaddr(port)) = value;
+	else
+		*(port2adr(port)) = value;
+}
+
+void sh7751se_outb_p(unsigned char value, unsigned long port)
+{
+        if (PXSEG(port))
+                *(volatile unsigned char *)port = value;
+	else if (is_pci_ioaddr(port))
+		*((unsigned char*)pci_ioaddr(port)) = value;
+	else
+		*(port2adr(port)) = value;
+	ctrl_delay();
+}
+
+void sh7751se_outw(unsigned short value, unsigned long port)
+{
+        if (PXSEG(port))
+                *(volatile unsigned short *)port = value;
+	else if (is_pci_ioaddr(port))
+		*((unsigned short *)pci_ioaddr(port)) = value;
+	else if (port >= 0x2000)
+		*port2adr(port) = value;
+	else
+		maybebadio(port);
+}
+
+void sh7751se_outl(unsigned int value, unsigned long port)
+{
+        if (PXSEG(port))
+                *(volatile unsigned long *)port = value;
+	else if (is_pci_ioaddr(port))
+		*((unsigned long*)pci_ioaddr(port)) = value;
+	else
+		maybebadio(port);
+}
+
+void sh7751se_insl(unsigned long port, void *addr, unsigned long count)
+{
+	maybebadio(port);
+}
+
+void sh7751se_outsl(unsigned long port, const void *addr, unsigned long count)
+{
+	maybebadio(port);
+}
diff --git a/arch/sh/boards/mach-se/7751/irq.c b/arch/sh/boards/mach-se/7751/irq.c
new file mode 100644
index 000000000000..5c9847ea1e7c
--- /dev/null
+++ b/arch/sh/boards/mach-se/7751/irq.c
@@ -0,0 +1,50 @@
+/*
+ * linux/arch/sh/boards/se/7751/irq.c
+ *
+ * Copyright (C) 2000  Kazumoto Kojima
+ *
+ * Hitachi SolutionEngine Support.
+ *
+ * Modified for 7751 Solution Engine by
+ * Ian da Silva and Jeremy Siegel, 2001.
+ */
+
+#include <linux/init.h>
+#include <linux/irq.h>
+#include <asm/irq.h>
+#include <mach-se/mach/se7751.h>
+
+static struct ipr_data ipr_irq_table[] = {
+	{ 13, 3, 3, 2 },
+	/* Add additional entries here as drivers are added and tested. */
+};
+
+static unsigned long ipr_offsets[] = {
+	BCR_ILCRA,
+	BCR_ILCRB,
+	BCR_ILCRC,
+	BCR_ILCRD,
+	BCR_ILCRE,
+	BCR_ILCRF,
+	BCR_ILCRG,
+};
+
+static struct ipr_desc ipr_irq_desc = {
+	.ipr_offsets	= ipr_offsets,
+	.nr_offsets	= ARRAY_SIZE(ipr_offsets),
+
+	.ipr_data	= ipr_irq_table,
+	.nr_irqs	= ARRAY_SIZE(ipr_irq_table),
+
+	.chip = {
+		.name	= "IPR-se7751",
+	},
+};
+
+/*
+ * Initialize IRQ setting
+ */
+void __init init_7751se_IRQ(void)
+{
+	register_ipr_controller(&ipr_irq_desc);
+}
diff --git a/arch/sh/boards/se/7751/pci.c b/arch/sh/boards/mach-se/7751/pci.c
index 203b2923fe7f..203b2923fe7f 100644
--- a/arch/sh/boards/se/7751/pci.c
+++ b/arch/sh/boards/mach-se/7751/pci.c
diff --git a/arch/sh/boards/mach-se/7751/setup.c b/arch/sh/boards/mach-se/7751/setup.c
new file mode 100644
index 000000000000..50572512e3e8
--- /dev/null
+++ b/arch/sh/boards/mach-se/7751/setup.c
@@ -0,0 +1,78 @@
+/*
+ * linux/arch/sh/boards/se/7751/setup.c
+ *
+ * Copyright (C) 2000  Kazumoto Kojima
+ *
+ * Hitachi SolutionEngine Support.
+ *
+ * Modified for 7751 Solution Engine by
+ * Ian da Silva and Jeremy Siegel, 2001.
+ */
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <asm/machvec.h>
+#include <mach-se/mach/se7751.h>
+#include <asm/io.h>
+#include <asm/heartbeat.h>
+
+static unsigned char heartbeat_bit_pos[] = { 8, 9, 10, 11, 12, 13, 14, 15 };
+
+static struct heartbeat_data heartbeat_data = {
+	.bit_pos	= heartbeat_bit_pos,
+	.nr_bits	= ARRAY_SIZE(heartbeat_bit_pos),
+};
+
+static struct resource heartbeat_resources[] = {
+	[0] = {
+		.start	= PA_LED,
+		.end	= PA_LED,
+		.flags	= IORESOURCE_MEM,
+	},
+};
+
+static struct platform_device heartbeat_device = {
+	.name		= "heartbeat",
+	.id		= -1,
+	.dev	= {
+		.platform_data	= &heartbeat_data,
+	},
+	.num_resources	= ARRAY_SIZE(heartbeat_resources),
+	.resource	= heartbeat_resources,
+};
+
+static struct platform_device *se7751_devices[] __initdata = {
+	&heartbeat_device,
+};
+
+static int __init se7751_devices_setup(void)
+{
+	return platform_add_devices(se7751_devices, ARRAY_SIZE(se7751_devices));
+}
+__initcall(se7751_devices_setup);
+
+/*
+ * The Machine Vector
+ */
+static struct sh_machine_vector mv_7751se __initmv = {
+	.mv_name		= "7751 SolutionEngine",
+	.mv_nr_irqs		= 72,
+
+	.mv_inb			= sh7751se_inb,
+	.mv_inw			= sh7751se_inw,
+	.mv_inl			= sh7751se_inl,
+	.mv_outb		= sh7751se_outb,
+	.mv_outw		= sh7751se_outw,
+	.mv_outl		= sh7751se_outl,
+
+	.mv_inb_p		= sh7751se_inb_p,
+	.mv_inw_p		= sh7751se_inw,
+	.mv_inl_p		= sh7751se_inl,
+	.mv_outb_p		= sh7751se_outb_p,
+	.mv_outw_p		= sh7751se_outw,
+	.mv_outl_p		= sh7751se_outl,
+
+	.mv_insl		= sh7751se_insl,
+	.mv_outsl		= sh7751se_outsl,
+
+	.mv_init_irq		= init_7751se_IRQ,
+};
diff --git a/arch/sh/boards/se/7780/Makefile b/arch/sh/boards/mach-se/7780/Makefile
index 6b88adae3ecc..6b88adae3ecc 100644
--- a/arch/sh/boards/se/7780/Makefile
+++ b/arch/sh/boards/mach-se/7780/Makefile
diff --git a/arch/sh/boards/mach-se/7780/irq.c b/arch/sh/boards/mach-se/7780/irq.c
new file mode 100644
index 000000000000..66ad292c9fc3
--- /dev/null
+++ b/arch/sh/boards/mach-se/7780/irq.c
@@ -0,0 +1,46 @@
+/*
+ * linux/arch/sh/boards/se/7780/irq.c
+ *
+ * Copyright (C) 2006,2007  Nobuhiro Iwamatsu
+ *
+ * Hitachi UL SolutionEngine 7780 Support.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/init.h>
+#include <linux/irq.h>
+#include <linux/interrupt.h>
+#include <asm/irq.h>
+#include <asm/io.h>
+#include <mach-se/mach/se7780.h>
+
+/*
+ * Initialize IRQ setting
+ */
+void __init init_se7780_IRQ(void)
+{
+	/* enable all interrupt at FPGA */
+	ctrl_outw(0, FPGA_INTMSK1);
+	/* mask SM501 interrupt */
+	ctrl_outw((ctrl_inw(FPGA_INTMSK1) | 0x0002), FPGA_INTMSK1);
+	/* enable all interrupt at FPGA */
+	ctrl_outw(0, FPGA_INTMSK2);
+
+	/* set FPGA INTSEL register */
+	/* FPGA + 0x06 */
+	ctrl_outw( ((IRQPIN_SM501 << IRQPOS_SM501) |
+		(IRQPIN_SMC91CX << IRQPOS_SMC91CX)), FPGA_INTSEL1);
+
+	/* FPGA + 0x08 */
+	ctrl_outw(((IRQPIN_EXTINT4 << IRQPOS_EXTINT4) |
+		(IRQPIN_EXTINT3 << IRQPOS_EXTINT3) |
+		(IRQPIN_EXTINT2 << IRQPOS_EXTINT2) |
+		(IRQPIN_EXTINT1 << IRQPOS_EXTINT1)), FPGA_INTSEL2);
+
+	/* FPGA + 0x0A */
+	ctrl_outw((IRQPIN_PCCPW << IRQPOS_PCCPW), FPGA_INTSEL3);
+
+	plat_irq_setup_pins(IRQ_MODE_IRQ); /* install handlers for IRQ0-7 */
+}
diff --git a/arch/sh/boards/mach-se/7780/setup.c b/arch/sh/boards/mach-se/7780/setup.c
new file mode 100644
index 000000000000..1d3a867e94e3
--- /dev/null
+++ b/arch/sh/boards/mach-se/7780/setup.c
@@ -0,0 +1,124 @@
+/*
+ * linux/arch/sh/boards/se/7780/setup.c
+ *
+ * Copyright (C) 2006,2007  Nobuhiro Iwamatsu
+ *
+ * Hitachi UL SolutionEngine 7780 Support.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <asm/machvec.h>
+#include <mach-se/mach/se7780.h>
+#include <asm/io.h>
+#include <asm/heartbeat.h>
+
+/* Heartbeat */
+static struct heartbeat_data heartbeat_data = {
+	.regsize = 16,
+};
+
+static struct resource heartbeat_resources[] = {
+	[0] = {
+		.start  = PA_LED,
+		.end    = PA_LED,
+		.flags  = IORESOURCE_MEM,
+	},
+};
+
+static struct platform_device heartbeat_device = {
+	.name           = "heartbeat",
+	.id             = -1,
+	.dev = {
+		.platform_data = &heartbeat_data,
+	},
+	.num_resources  = ARRAY_SIZE(heartbeat_resources),
+	.resource       = heartbeat_resources,
+};
+
+/* SMC91x */
+static struct resource smc91x_eth_resources[] = {
+	[0] = {
+		.name   = "smc91x-regs" ,
+		.start  = PA_LAN + 0x300,
+		.end    = PA_LAN + 0x300 + 0x10 ,
+		.flags  = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start  = SMC_IRQ,
+		.end    = SMC_IRQ,
+		.flags  = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device smc91x_eth_device = {
+	.name           = "smc91x",
+	.id             = 0,
+	.dev = {
+		.dma_mask               = NULL,         /* don't use dma */
+		.coherent_dma_mask      = 0xffffffff,
+	},
+	.num_resources  = ARRAY_SIZE(smc91x_eth_resources),
+	.resource       = smc91x_eth_resources,
+};
+
+static struct platform_device *se7780_devices[] __initdata = {
+	&heartbeat_device,
+	&smc91x_eth_device,
+};
+
+static int __init se7780_devices_setup(void)
+{
+	return platform_add_devices(se7780_devices,
+		ARRAY_SIZE(se7780_devices));
+}
+device_initcall(se7780_devices_setup);
+
+#define GPIO_PHCR        0xFFEA000E
+#define GPIO_PMSELR      0xFFEA0080
+#define GPIO_PECR        0xFFEA0008
+
+static void __init se7780_setup(char **cmdline_p)
+{
+	/* "SH-Linux" on LED Display */
+	ctrl_outw( 'S' , PA_LED_DISP + (DISP_SEL0_ADDR << 1) );
+	ctrl_outw( 'H' , PA_LED_DISP + (DISP_SEL1_ADDR << 1) );
+	ctrl_outw( '-' , PA_LED_DISP + (DISP_SEL2_ADDR << 1) );
+	ctrl_outw( 'L' , PA_LED_DISP + (DISP_SEL3_ADDR << 1) );
+	ctrl_outw( 'i' , PA_LED_DISP + (DISP_SEL4_ADDR << 1) );
+	ctrl_outw( 'n' , PA_LED_DISP + (DISP_SEL5_ADDR << 1) );
+	ctrl_outw( 'u' , PA_LED_DISP + (DISP_SEL6_ADDR << 1) );
+	ctrl_outw( 'x' , PA_LED_DISP + (DISP_SEL7_ADDR << 1) );
+
+	printk(KERN_INFO "Hitachi UL Solutions Engine 7780SE03 support.\n");
+
+	/*
+	 * PCI REQ/GNT setting
+	 *   REQ0/GNT0 -> USB
+	 *   REQ1/GNT1 -> PC Card
+	 *   REQ2/GNT2 -> Serial ATA
+	 *   REQ3/GNT3 -> PCI slot
+	 */
+	ctrl_outw(0x0213, FPGA_REQSEL);
+
+	/* GPIO setting */
+	ctrl_outw(0x0000, GPIO_PECR);
+	ctrl_outw(ctrl_inw(GPIO_PHCR)&0xfff3, GPIO_PHCR);
+	ctrl_outw(0x0c00, GPIO_PMSELR);
+
+	/* iVDR Power ON */
+	ctrl_outw(0x0001, FPGA_IVDRPW);
+}
+
+/*
+ * The Machine Vector
+ */
+static struct sh_machine_vector mv_se7780 __initmv = {
+	.mv_name                = "Solution Engine 7780" ,
+	.mv_setup               = se7780_setup ,
+	.mv_nr_irqs		= 111 ,
+	.mv_init_irq		= init_se7780_IRQ,
+};
diff --git a/arch/sh/boards/mach-se/Makefile b/arch/sh/boards/mach-se/Makefile
new file mode 100644
index 000000000000..2de42bae4b4f
--- /dev/null
+++ b/arch/sh/boards/mach-se/Makefile
@@ -0,0 +1,9 @@
+obj-$(CONFIG_SH_7619_SOLUTION_ENGINE)	+= board-se7619.o
+
+obj-$(CONFIG_SH_SOLUTION_ENGINE)	+= 770x/
+obj-$(CONFIG_SH_7206_SOLUTION_ENGINE)	+= 7206/
+obj-$(CONFIG_SH_7722_SOLUTION_ENGINE)	+= 7722/
+obj-$(CONFIG_SH_7751_SOLUTION_ENGINE)	+= 7751/
+obj-$(CONFIG_SH_7780_SOLUTION_ENGINE)	+= 7780/
+obj-$(CONFIG_SH_7343_SOLUTION_ENGINE)	+= 7343/
+obj-$(CONFIG_SH_7721_SOLUTION_ENGINE)	+= 7721/
diff --git a/arch/sh/boards/se/7619/setup.c b/arch/sh/boards/mach-se/board-se7619.c
index 1d0ef7faa10d..1d0ef7faa10d 100644
--- a/arch/sh/boards/se/7619/setup.c
+++ b/arch/sh/boards/mach-se/board-se7619.c
diff --git a/arch/sh/boards/sh03/Makefile b/arch/sh/boards/mach-sh03/Makefile
index 400306a796ec..400306a796ec 100644
--- a/arch/sh/boards/sh03/Makefile
+++ b/arch/sh/boards/mach-sh03/Makefile
diff --git a/arch/sh/boards/sh03/rtc.c b/arch/sh/boards/mach-sh03/rtc.c
index 0a9266bb51c5..0a9266bb51c5 100644
--- a/arch/sh/boards/sh03/rtc.c
+++ b/arch/sh/boards/mach-sh03/rtc.c
diff --git a/arch/sh/boards/mach-sh03/setup.c b/arch/sh/boards/mach-sh03/setup.c
new file mode 100644
index 000000000000..5771219be3fd
--- /dev/null
+++ b/arch/sh/boards/mach-sh03/setup.c
@@ -0,0 +1,75 @@
+/*
+ * linux/arch/sh/boards/sh03/setup.c
+ *
+ * Copyright (C) 2004  Interface Co.,Ltd. Saito.K
+ *
+ */
+
+#include <linux/init.h>
+#include <linux/irq.h>
+#include <linux/pci.h>
+#include <linux/platform_device.h>
+#include <asm/io.h>
+#include <asm/rtc.h>
+#include <mach-sh03/mach/io.h>
+#include <mach-sh03/mach/sh03.h>
+#include <asm/addrspace.h>
+
+static void __init init_sh03_IRQ(void)
+{
+	plat_irq_setup_pins(IRQ_MODE_IRQ);
+}
+
+extern void *cf_io_base;
+
+static void __iomem *sh03_ioport_map(unsigned long port, unsigned int size)
+{
+	if (PXSEG(port))
+		return (void __iomem *)port;
+	/* CompactFlash (IDE) */
+	if (((port >= 0x1f0) && (port <= 0x1f7)) || (port == 0x3f6))
+		return (void __iomem *)((unsigned long)cf_io_base + port);
+
+        return (void __iomem *)(port + PCI_IO_BASE);
+}
+
+/* arch/sh/boards/sh03/rtc.c */
+void sh03_time_init(void);
+
+static void __init sh03_setup(char **cmdline_p)
+{
+	board_time_init = sh03_time_init;
+}
+
+static struct resource heartbeat_resources[] = {
+	[0] = {
+		.start	= 0xa0800000,
+		.end	= 0xa0800000,
+		.flags	= IORESOURCE_MEM,
+	},
+};
+
+static struct platform_device heartbeat_device = {
+	.name		= "heartbeat",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(heartbeat_resources),
+	.resource	= heartbeat_resources,
+};
+
+static struct platform_device *sh03_devices[] __initdata = {
+	&heartbeat_device,
+};
+
+static int __init sh03_devices_setup(void)
+{
+	return platform_add_devices(sh03_devices, ARRAY_SIZE(sh03_devices));
+}
+__initcall(sh03_devices_setup);
+
+static struct sh_machine_vector mv_sh03 __initmv = {
+	.mv_name		= "Interface (CTP/PCI-SH03)",
+	.mv_setup		= sh03_setup,
+	.mv_nr_irqs		= 48,
+	.mv_ioport_map		= sh03_ioport_map,
+	.mv_init_irq		= init_sh03_IRQ,
+};
diff --git a/arch/sh/boards/mach-sh7763rdp/Makefile b/arch/sh/boards/mach-sh7763rdp/Makefile
new file mode 100644
index 000000000000..f6c0b55516d2
--- /dev/null
+++ b/arch/sh/boards/mach-sh7763rdp/Makefile
@@ -0,0 +1 @@
+obj-y    := setup.o irq.o
diff --git a/arch/sh/boards/mach-sh7763rdp/irq.c b/arch/sh/boards/mach-sh7763rdp/irq.c
new file mode 100644
index 000000000000..fd850bad2dec
--- /dev/null
+++ b/arch/sh/boards/mach-sh7763rdp/irq.c
@@ -0,0 +1,45 @@
+/*
+ * linux/arch/sh/boards/renesas/sh7763rdp/irq.c
+ *
+ * Renesas Solutions SH7763RDP Support.
+ *
+ * Copyright (C) 2008 Renesas Solutions Corp.
+ * Copyright (C) 2008  Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#include <linux/init.h>
+#include <linux/irq.h>
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <asm/sh7763rdp.h>
+
+#define INTC_BASE		(0xFFD00000)
+#define INTC_INT2PRI7   (INTC_BASE+0x4001C)
+#define INTC_INT2MSKCR	(INTC_BASE+0x4003C)
+#define INTC_INT2MSKCR1	(INTC_BASE+0x400D4)
+
+/*
+ * Initialize IRQ setting
+ */
+void __init init_sh7763rdp_IRQ(void)
+{
+	/* GPIO enabled */
+	ctrl_outl(1 << 25, INTC_INT2MSKCR);
+
+	/* enable GPIO interrupts */
+	ctrl_outl((ctrl_inl(INTC_INT2PRI7) & 0xFF00FFFF) | 0x000F0000,
+		  INTC_INT2PRI7);
+
+	/* USBH enabled */
+	ctrl_outl(1 << 17, INTC_INT2MSKCR1);
+
+	/* GETHER enabled */
+	ctrl_outl(1 << 16, INTC_INT2MSKCR1);
+
+	/* DMAC enabled */
+	ctrl_outl(1 << 8, INTC_INT2MSKCR);
+}
diff --git a/arch/sh/boards/mach-sh7763rdp/setup.c b/arch/sh/boards/mach-sh7763rdp/setup.c
new file mode 100644
index 000000000000..23850da05e3c
--- /dev/null
+++ b/arch/sh/boards/mach-sh7763rdp/setup.c
@@ -0,0 +1,208 @@
+/*
+ * linux/arch/sh/boards/renesas/sh7763rdp/setup.c
+ *
+ * Renesas Solutions sh7763rdp board
+ *
+ * Copyright (C) 2008 Renesas Solutions Corp.
+ * Copyright (C) 2008 Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/interrupt.h>
+#include <linux/input.h>
+#include <linux/mtd/physmap.h>
+#include <linux/fb.h>
+#include <linux/io.h>
+#include <asm/sh7763rdp.h>
+#include <asm/sh_eth.h>
+#include <asm/sh7760fb.h>
+
+/* NOR Flash */
+static struct mtd_partition sh7763rdp_nor_flash_partitions[] = {
+	{
+		.name = "U-Boot",
+		.offset = 0,
+		.size = (2 * 128 * 1024),
+		.mask_flags = MTD_WRITEABLE,	/* Read-only */
+	}, {
+		.name = "Linux-Kernel",
+		.offset = MTDPART_OFS_APPEND,
+		.size = (20 * 128 * 1024),
+	}, {
+		.name = "Root Filesystem",
+		.offset = MTDPART_OFS_APPEND,
+		.size = MTDPART_SIZ_FULL,
+	},
+};
+
+static struct physmap_flash_data sh7763rdp_nor_flash_data = {
+	.width = 2,
+	.parts = sh7763rdp_nor_flash_partitions,
+	.nr_parts = ARRAY_SIZE(sh7763rdp_nor_flash_partitions),
+};
+
+static struct resource sh7763rdp_nor_flash_resources[] = {
+	[0] = {
+		.name = "NOR Flash",
+		.start = 0,
+		.end = (64 * 1024 * 1024),
+		.flags = IORESOURCE_MEM,
+	},
+};
+
+static struct platform_device sh7763rdp_nor_flash_device = {
+	.name = "physmap-flash",
+	.resource = sh7763rdp_nor_flash_resources,
+	.num_resources = ARRAY_SIZE(sh7763rdp_nor_flash_resources),
+	.dev = {
+		.platform_data = &sh7763rdp_nor_flash_data,
+	},
+};
+
+/* SH-Ether */
+static struct resource sh_eth_resources[] = {
+	{
+		.start  = 0xFEE00800,   /* use eth1 */
+		.end    = 0xFEE00F7C - 1,
+		.flags  = IORESOURCE_MEM,
+	}, {
+		.start  = 58,   /* irq number */
+		.end    = 58,
+		.flags  = IORESOURCE_IRQ,
+	},
+};
+
+static struct sh_eth_plat_data sh7763_eth_pdata = {
+	.phy = 1,
+	.edmac_endian = EDMAC_LITTLE_ENDIAN,
+};
+
+static struct platform_device sh7763rdp_eth_device = {
+	.name       = "sh-eth",
+	.resource   = sh_eth_resources,
+	.num_resources  = ARRAY_SIZE(sh_eth_resources),
+	.dev        = {
+		.platform_data = &sh7763_eth_pdata,
+	},
+};
+
+/* SH7763 LCDC */
+static struct resource sh7763rdp_fb_resources[] = {
+	{
+		.start  = 0xFFE80000,
+		.end    = 0xFFE80442 - 1,
+		.flags  = IORESOURCE_MEM,
+	},
+};
+
+static struct fb_videomode sh7763fb_videomode = {
+	.refresh = 60,
+	.name = "VGA Monitor",
+	.xres = 640,
+	.yres = 480,
+	.pixclock = 10000,
+	.left_margin = 80,
+	.right_margin = 24,
+	.upper_margin = 30,
+	.lower_margin = 1,
+	.hsync_len = 96,
+	.vsync_len = 1,
+	.sync = 0,
+	.vmode = FB_VMODE_NONINTERLACED,
+	.flag = FBINFO_FLAG_DEFAULT,
+};
+
+static struct sh7760fb_platdata sh7763fb_def_pdata = {
+	.def_mode = &sh7763fb_videomode,
+	.ldmtr = (LDMTR_TFT_COLOR_16|LDMTR_MCNT),
+	.lddfr = LDDFR_16BPP_RGB565,
+	.ldpmmr = 0x0000,
+	.ldpspr = 0xFFFF,
+	.ldaclnr = 0x0001,
+	.ldickr = 0x1102,
+	.rotate = 0,
+	.novsync = 0,
+	.blank = NULL,
+};
+
+static struct platform_device sh7763rdp_fb_device = {
+	.name		= "sh7760-lcdc",
+	.resource	= sh7763rdp_fb_resources,
+	.num_resources = ARRAY_SIZE(sh7763rdp_fb_resources),
+	.dev = {
+		.platform_data = &sh7763fb_def_pdata,
+	},
+};
+
+static struct platform_device *sh7763rdp_devices[] __initdata = {
+	&sh7763rdp_nor_flash_device,
+	&sh7763rdp_eth_device,
+	&sh7763rdp_fb_device,
+};
+
+static int __init sh7763rdp_devices_setup(void)
+{
+	return platform_add_devices(sh7763rdp_devices,
+				    ARRAY_SIZE(sh7763rdp_devices));
+}
+device_initcall(sh7763rdp_devices_setup);
+
+static void __init sh7763rdp_setup(char **cmdline_p)
+{
+	/* Board version check */
+	if (ctrl_inw(CPLD_BOARD_ID_ERV_REG) == 0xECB1)
+		printk(KERN_INFO "RTE Standard Configuration\n");
+	else
+		printk(KERN_INFO "RTA Standard Configuration\n");
+
+	/* USB pin select bits (clear bit 5-2 to 0) */
+	ctrl_outw((ctrl_inw(PORT_PSEL2) & 0xFFC3), PORT_PSEL2);
+	/* USBH setup port I controls to other (clear bits 4-9 to 0) */
+	ctrl_outw(ctrl_inw(PORT_PICR) & 0xFC0F, PORT_PICR);
+
+	/* Select USB Host controller */
+	ctrl_outw(0x00, USB_USBHSC);
+
+	/* For LCD */
+	/* set PTJ7-1, bits 15-2 of PJCR to 0 */
+	ctrl_outw(ctrl_inw(PORT_PJCR) & 0x0003, PORT_PJCR);
+	/* set PTI5, bits 11-10 of PICR to 0 */
+	ctrl_outw(ctrl_inw(PORT_PICR) & 0xF3FF, PORT_PICR);
+	ctrl_outw(0, PORT_PKCR);
+	ctrl_outw(0, PORT_PLCR);
+	/* set PSEL2 bits 14-8, 5-4, of PSEL2 to 0 */
+	ctrl_outw((ctrl_inw(PORT_PSEL2) & 0x00C0), PORT_PSEL2);
+	/* set PSEL3 bits 14-12, 6-4, 2-0 of PSEL3 to 0 */
+	ctrl_outw((ctrl_inw(PORT_PSEL3) & 0x0700), PORT_PSEL3);
+
+	/* For HAC */
+	/* bit3-0  0100:HAC & SSI1 enable */
+	ctrl_outw((ctrl_inw(PORT_PSEL1) & 0xFFF0) | 0x0004, PORT_PSEL1);
+	/* bit14      1:SSI_HAC_CLK enable */
+	ctrl_outw(ctrl_inw(PORT_PSEL4) | 0x4000, PORT_PSEL4);
+
+	/* SH-Ether */
+	ctrl_outw((ctrl_inw(PORT_PSEL1) & ~0xff00) | 0x2400, PORT_PSEL1);
+	ctrl_outw(0x0, PORT_PFCR);
+	ctrl_outw(0x0, PORT_PFCR);
+	ctrl_outw(0x0, PORT_PFCR);
+
+	/* MMC */
+	/*selects SCIF and MMC other functions */
+	ctrl_outw(0x0001, PORT_PSEL0);
+	/* MMC clock operates */
+	ctrl_outl(ctrl_inl(MSTPCR1) & ~0x8, MSTPCR1);
+	ctrl_outw(ctrl_inw(PORT_PACR) & ~0x3000, PORT_PACR);
+	ctrl_outw(ctrl_inw(PORT_PCCR) & ~0xCFC3, PORT_PCCR);
+}
+
+static struct sh_machine_vector mv_sh7763rdp __initmv = {
+	.mv_name = "sh7763drp",
+	.mv_setup = sh7763rdp_setup,
+	.mv_nr_irqs = 112,
+	.mv_init_irq = init_sh7763rdp_IRQ,
+};
diff --git a/arch/sh/boards/snapgear/Makefile b/arch/sh/boards/mach-snapgear/Makefile
index d2d2f4b6a502..d2d2f4b6a502 100644
--- a/arch/sh/boards/snapgear/Makefile
+++ b/arch/sh/boards/mach-snapgear/Makefile
diff --git a/arch/sh/boards/snapgear/io.c b/arch/sh/boards/mach-snapgear/io.c
index 0f4824264557..0f4824264557 100644
--- a/arch/sh/boards/snapgear/io.c
+++ b/arch/sh/boards/mach-snapgear/io.c
diff --git a/arch/sh/boards/mach-snapgear/setup.c b/arch/sh/boards/mach-snapgear/setup.c
new file mode 100644
index 000000000000..a5e349d3dda2
--- /dev/null
+++ b/arch/sh/boards/mach-snapgear/setup.c
@@ -0,0 +1,95 @@
+/*
+ * linux/arch/sh/boards/snapgear/setup.c
+ *
+ * Copyright (C) 2002  David McCullough <davidm@snapgear.com>
+ * Copyright (C) 2003  Paul Mundt <lethal@linux-sh.org>
+ *
+ * Based on files with the following comments:
+ *
+ *           Copyright (C) 2000  Kazumoto Kojima
+ *
+ *           Modified for 7751 Solution Engine by
+ *           Ian da Silva and Jeremy Siegel, 2001.
+ */
+#include <linux/init.h>
+#include <linux/irq.h>
+#include <linux/interrupt.h>
+#include <linux/timer.h>
+#include <linux/delay.h>
+#include <linux/module.h>
+#include <linux/sched.h>
+#include <asm/machvec.h>
+#include <asm/snapgear.h>
+#include <asm/irq.h>
+#include <asm/io.h>
+#include <cpu/timer.h>
+
+/*
+ * EraseConfig handling functions
+ */
+
+static irqreturn_t eraseconfig_interrupt(int irq, void *dev_id)
+{
+	(void)ctrl_inb(0xb8000000);	/* dummy read */
+
+	printk("SnapGear: erase switch interrupt!\n");
+
+	return IRQ_HANDLED;
+}
+
+static int __init eraseconfig_init(void)
+{
+	printk("SnapGear: EraseConfig init\n");
+	/* Setup "EraseConfig" switch on external IRQ 0 */
+	if (request_irq(IRL0_IRQ, eraseconfig_interrupt, IRQF_DISABLED,
+				"Erase Config", NULL))
+		printk("SnapGear: failed to register IRQ%d for Reset witch\n",
+				IRL0_IRQ);
+	else
+		printk("SnapGear: registered EraseConfig switch on IRQ%d\n",
+				IRL0_IRQ);
+	return(0);
+}
+
+module_init(eraseconfig_init);
+
+/****************************************************************************/
+/*
+ * Initialize IRQ setting
+ *
+ * IRL0 = erase switch
+ * IRL1 = eth0
+ * IRL2 = eth1
+ * IRL3 = crypto
+ */
+
+static void __init init_snapgear_IRQ(void)
+{
+	printk("Setup SnapGear IRQ/IPR ...\n");
+	/* enable individual interrupt mode for externals */
+	plat_irq_setup_pins(IRQ_MODE_IRQ);
+}
+
+/*
+ * The Machine Vector
+ */
+static struct sh_machine_vector mv_snapgear __initmv = {
+	.mv_name		= "SnapGear SecureEdge5410",
+	.mv_nr_irqs		= 72,
+
+	.mv_inb			= snapgear_inb,
+	.mv_inw			= snapgear_inw,
+	.mv_inl			= snapgear_inl,
+	.mv_outb		= snapgear_outb,
+	.mv_outw		= snapgear_outw,
+	.mv_outl		= snapgear_outl,
+
+	.mv_inb_p		= snapgear_inb_p,
+	.mv_inw_p		= snapgear_inw,
+	.mv_inl_p		= snapgear_inl,
+	.mv_outb_p		= snapgear_outb_p,
+	.mv_outw_p		= snapgear_outw,
+	.mv_outl_p		= snapgear_outl,
+
+	.mv_init_irq		= init_snapgear_IRQ,
+};
diff --git a/arch/sh/boards/renesas/systemh/Makefile b/arch/sh/boards/mach-systemh/Makefile
index 2cc6a23d9d39..2cc6a23d9d39 100644
--- a/arch/sh/boards/renesas/systemh/Makefile
+++ b/arch/sh/boards/mach-systemh/Makefile
diff --git a/arch/sh/boards/renesas/systemh/io.c b/arch/sh/boards/mach-systemh/io.c
index 1b767e1a1428..1b767e1a1428 100644
--- a/arch/sh/boards/renesas/systemh/io.c
+++ b/arch/sh/boards/mach-systemh/io.c
diff --git a/arch/sh/boards/mach-systemh/irq.c b/arch/sh/boards/mach-systemh/irq.c
new file mode 100644
index 000000000000..601c9c8cdbec
--- /dev/null
+++ b/arch/sh/boards/mach-systemh/irq.c
@@ -0,0 +1,101 @@
+/*
+ * linux/arch/sh/boards/renesas/systemh/irq.c
+ *
+ * Copyright (C) 2000  Kazumoto Kojima
+ *
+ * Hitachi SystemH Support.
+ *
+ * Modified for 7751 SystemH by
+ * Jonathan Short.
+ */
+
+#include <linux/init.h>
+#include <linux/irq.h>
+#include <linux/interrupt.h>
+
+#include <asm/io.h>
+#include <asm/systemh7751.h>
+#include <asm/smc37c93x.h>
+
+/* address of external interrupt mask register
+ * address must be set prior to use these (maybe in init_XXX_irq())
+ * XXX : is it better to use .config than specifying it in code? */
+static unsigned long *systemh_irq_mask_register = (unsigned long *)0xB3F10004;
+static unsigned long *systemh_irq_request_register = (unsigned long *)0xB3F10000;
+
+/* forward declaration */
+static unsigned int startup_systemh_irq(unsigned int irq);
+static void shutdown_systemh_irq(unsigned int irq);
+static void enable_systemh_irq(unsigned int irq);
+static void disable_systemh_irq(unsigned int irq);
+static void mask_and_ack_systemh(unsigned int);
+static void end_systemh_irq(unsigned int irq);
+
+/* hw_interrupt_type */
+static struct hw_interrupt_type systemh_irq_type = {
+	.typename = " SystemH Register",
+	.startup = startup_systemh_irq,
+	.shutdown = shutdown_systemh_irq,
+	.enable = enable_systemh_irq,
+	.disable = disable_systemh_irq,
+	.ack = mask_and_ack_systemh,
+	.end = end_systemh_irq
+};
+
+static unsigned int startup_systemh_irq(unsigned int irq)
+{
+	enable_systemh_irq(irq);
+	return 0; /* never anything pending */
+}
+
+static void shutdown_systemh_irq(unsigned int irq)
+{
+	disable_systemh_irq(irq);
+}
+
+static void disable_systemh_irq(unsigned int irq)
+{
+	if (systemh_irq_mask_register) {
+		unsigned long val, mask = 0x01 << 1;
+
+		/* Clear the "irq"th bit in the mask and set it in the request */
+		val = ctrl_inl((unsigned long)systemh_irq_mask_register);
+		val &= ~mask;
+		ctrl_outl(val, (unsigned long)systemh_irq_mask_register);
+
+		val = ctrl_inl((unsigned long)systemh_irq_request_register);
+		val |= mask;
+		ctrl_outl(val, (unsigned long)systemh_irq_request_register);
+	}
+}
+
+static void enable_systemh_irq(unsigned int irq)
+{
+	if (systemh_irq_mask_register) {
+		unsigned long val, mask = 0x01 << 1;
+
+		/* Set "irq"th bit in the mask register */
+		val = ctrl_inl((unsigned long)systemh_irq_mask_register);
+		val |= mask;
+		ctrl_outl(val, (unsigned long)systemh_irq_mask_register);
+	}
+}
+
+static void mask_and_ack_systemh(unsigned int irq)
+{
+	disable_systemh_irq(irq);
+}
+
+static void end_systemh_irq(unsigned int irq)
+{
+	if (!(irq_desc[irq].status & (IRQ_DISABLED|IRQ_INPROGRESS)))
+		enable_systemh_irq(irq);
+}
+
+void make_systemh_irq(unsigned int irq)
+{
+	disable_irq_nosync(irq);
+	irq_desc[irq].chip = &systemh_irq_type;
+	disable_systemh_irq(irq);
+}
+
diff --git a/arch/sh/boards/renesas/systemh/setup.c b/arch/sh/boards/mach-systemh/setup.c
index ee78af842778..ee78af842778 100644
--- a/arch/sh/boards/renesas/systemh/setup.c
+++ b/arch/sh/boards/mach-systemh/setup.c
diff --git a/arch/sh/boards/titan/Makefile b/arch/sh/boards/mach-titan/Makefile
index 08d753700062..08d753700062 100644
--- a/arch/sh/boards/titan/Makefile
+++ b/arch/sh/boards/mach-titan/Makefile
diff --git a/arch/sh/boards/titan/io.c b/arch/sh/boards/mach-titan/io.c
index 4730c1dd697d..4730c1dd697d 100644
--- a/arch/sh/boards/titan/io.c
+++ b/arch/sh/boards/mach-titan/io.c
diff --git a/arch/sh/boards/titan/setup.c b/arch/sh/boards/mach-titan/setup.c
index 5de3b2ad71af..5de3b2ad71af 100644
--- a/arch/sh/boards/titan/setup.c
+++ b/arch/sh/boards/mach-titan/setup.c
diff --git a/arch/sh/boards/renesas/x3proto/Makefile b/arch/sh/boards/mach-x3proto/Makefile
index 983e4551fecf..983e4551fecf 100644
--- a/arch/sh/boards/renesas/x3proto/Makefile
+++ b/arch/sh/boards/mach-x3proto/Makefile
diff --git a/arch/sh/boards/renesas/x3proto/ilsel.c b/arch/sh/boards/mach-x3proto/ilsel.c
index b5c673c39337..b5c673c39337 100644
--- a/arch/sh/boards/renesas/x3proto/ilsel.c
+++ b/arch/sh/boards/mach-x3proto/ilsel.c
diff --git a/arch/sh/boards/mach-x3proto/setup.c b/arch/sh/boards/mach-x3proto/setup.c
new file mode 100644
index 000000000000..a70d23b21788
--- /dev/null
+++ b/arch/sh/boards/mach-x3proto/setup.c
@@ -0,0 +1,144 @@
+/*
+ * arch/sh/boards/renesas/x3proto/setup.c
+ *
+ * Renesas SH-X3 Prototype Board Support.
+ *
+ * Copyright (C) 2007 - 2008 Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/kernel.h>
+#include <linux/io.h>
+#include <linux/smc91x.h>
+#include <asm/ilsel.h>
+
+static struct resource heartbeat_resources[] = {
+	[0] = {
+		.start	= 0xb8140020,
+		.end	= 0xb8140020,
+		.flags	= IORESOURCE_MEM,
+	},
+};
+
+static struct platform_device heartbeat_device = {
+	.name		= "heartbeat",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(heartbeat_resources),
+	.resource	= heartbeat_resources,
+};
+
+static struct smc91x_platdata smc91x_info = {
+	.flags	= SMC91X_USE_16BIT | SMC91X_NOWAIT,
+};
+
+static struct resource smc91x_resources[] = {
+	[0] = {
+		.start		= 0x18000300,
+		.end		= 0x18000300 + 0x10 - 1,
+		.flags		= IORESOURCE_MEM,
+	},
+	[1] = {
+		/* Filled in by ilsel */
+		.flags		= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device smc91x_device = {
+	.name		= "smc91x",
+	.id		= -1,
+	.resource	= smc91x_resources,
+	.num_resources	= ARRAY_SIZE(smc91x_resources),
+	.dev	= {
+		.platform_data = &smc91x_info,
+	},
+};
+
+static struct resource r8a66597_usb_host_resources[] = {
+	[0] = {
+		.name	= "r8a66597_hcd",
+		.start	= 0x18040000,
+		.end	= 0x18080000 - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.name	= "r8a66597_hcd",
+		/* Filled in by ilsel */
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device r8a66597_usb_host_device = {
+	.name		= "r8a66597_hcd",
+	.id		= -1,
+	.dev = {
+		.dma_mask		= NULL,		/* don't use dma */
+		.coherent_dma_mask	= 0xffffffff,
+	},
+	.num_resources	= ARRAY_SIZE(r8a66597_usb_host_resources),
+	.resource	= r8a66597_usb_host_resources,
+};
+
+static struct resource m66592_usb_peripheral_resources[] = {
+	[0] = {
+		.name	= "m66592_udc",
+		.start	= 0x18080000,
+		.end	= 0x180c0000 - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.name	= "m66592_udc",
+		/* Filled in by ilsel */
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device m66592_usb_peripheral_device = {
+	.name		= "m66592_udc",
+	.id		= -1,
+	.dev = {
+		.dma_mask		= NULL,		/* don't use dma */
+		.coherent_dma_mask	= 0xffffffff,
+	},
+	.num_resources	= ARRAY_SIZE(m66592_usb_peripheral_resources),
+	.resource	= m66592_usb_peripheral_resources,
+};
+
+static struct platform_device *x3proto_devices[] __initdata = {
+	&heartbeat_device,
+	&smc91x_device,
+	&r8a66597_usb_host_device,
+	&m66592_usb_peripheral_device,
+};
+
+static int __init x3proto_devices_setup(void)
+{
+	r8a66597_usb_host_resources[1].start =
+		r8a66597_usb_host_resources[1].end = ilsel_enable(ILSEL_USBH_I);
+
+	m66592_usb_peripheral_resources[1].start =
+		m66592_usb_peripheral_resources[1].end = ilsel_enable(ILSEL_USBP_I);
+
+	smc91x_resources[1].start =
+		smc91x_resources[1].end = ilsel_enable(ILSEL_LAN);
+
+	return platform_add_devices(x3proto_devices,
+				    ARRAY_SIZE(x3proto_devices));
+}
+device_initcall(x3proto_devices_setup);
+
+static void __init x3proto_init_irq(void)
+{
+	plat_irq_setup_pins(IRQ_MODE_IRL3210);
+
+	/* Set ICR0.LVLMODE */
+	ctrl_outl(ctrl_inl(0xfe410000) | (1 << 21), 0xfe410000);
+}
+
+static struct sh_machine_vector mv_x3proto __initmv = {
+	.mv_name		= "x3proto",
+	.mv_init_irq		= x3proto_init_irq,
+};
diff --git a/arch/sh/boards/magicpanelr2/Kconfig b/arch/sh/boards/magicpanelr2/Kconfig
deleted file mode 100644
index b0abddc3e84f..000000000000
--- a/arch/sh/boards/magicpanelr2/Kconfig
+++ /dev/null
@@ -1,13 +0,0 @@
-if SH_MAGIC_PANEL_R2
-
-menu "Magic Panel R2 options"
-
-config SH_MAGIC_PANEL_R2_VERSION
-	int SH_MAGIC_PANEL_R2_VERSION
-	default "3"
-	help
-	  Set the version of the Magic Panel R2
-
-endmenu
-
-endif
diff --git a/arch/sh/boards/magicpanelr2/Makefile b/arch/sh/boards/magicpanelr2/Makefile
deleted file mode 100644
index 7a6d586b9072..000000000000
--- a/arch/sh/boards/magicpanelr2/Makefile
+++ /dev/null
@@ -1,5 +0,0 @@
-#
-# Makefile for the Magic Panel specific parts
-#
-
-obj-y	 := setup.o
\ No newline at end of file
diff --git a/arch/sh/boards/renesas/migor/Makefile b/arch/sh/boards/renesas/migor/Makefile
deleted file mode 100644
index 77037567633b..000000000000
--- a/arch/sh/boards/renesas/migor/Makefile
+++ /dev/null
@@ -1 +0,0 @@
-obj-y	 := setup.o
diff --git a/arch/sh/boards/renesas/migor/setup.c b/arch/sh/boards/renesas/migor/setup.c
deleted file mode 100644
index 963c99322095..000000000000
--- a/arch/sh/boards/renesas/migor/setup.c
+++ /dev/null
@@ -1,257 +0,0 @@
-/*
- * Renesas System Solutions Asia Pte. Ltd - Migo-R
- *
- * Copyright (C) 2008 Magnus Damm
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/interrupt.h>
-#include <linux/input.h>
-#include <linux/mtd/physmap.h>
-#include <linux/mtd/nand.h>
-#include <linux/i2c.h>
-#include <linux/smc91x.h>
-#include <asm/machvec.h>
-#include <asm/io.h>
-#include <asm/sh_keysc.h>
-#include <asm/migor.h>
-
-/* Address     IRQ  Size  Bus  Description
- * 0x00000000       64MB  16   NOR Flash (SP29PL256N)
- * 0x0c000000       64MB  64   SDRAM (2xK4M563233G)
- * 0x10000000  IRQ0       16   Ethernet (SMC91C111)
- * 0x14000000  IRQ4       16   USB 2.0 Host Controller (M66596)
- * 0x18000000       8GB    8   NAND Flash (K9K8G08U0A)
- */
-
-static struct smc91x_platdata smc91x_info = {
-	.flags = SMC91X_USE_16BIT,
-};
-
-static struct resource smc91x_eth_resources[] = {
-	[0] = {
-		.name   = "SMC91C111" ,
-		.start  = 0x10000300,
-		.end    = 0x1000030f,
-		.flags  = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start  = 32, /* IRQ0 */
-		.flags  = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
-	},
-};
-
-static struct platform_device smc91x_eth_device = {
-	.name           = "smc91x",
-	.num_resources  = ARRAY_SIZE(smc91x_eth_resources),
-	.resource       = smc91x_eth_resources,
-	.dev	= {
-		.platform_data	= &smc91x_info,
-	},
-};
-
-static struct sh_keysc_info sh_keysc_info = {
-	.mode = SH_KEYSC_MODE_2, /* KEYOUT0->4, KEYIN1->5 */
-	.scan_timing = 3,
-	.delay = 5,
-	.keycodes = {
-		0, KEY_UP, KEY_DOWN, KEY_LEFT, KEY_RIGHT, KEY_ENTER,
-		0, KEY_F, KEY_C, KEY_D,	KEY_H, KEY_1,
-		0, KEY_2, KEY_3, KEY_4,	KEY_5, KEY_6,
-		0, KEY_7, KEY_8, KEY_9, KEY_S, KEY_0,
-		0, KEY_P, KEY_STOP, KEY_REWIND, KEY_PLAY, KEY_FASTFORWARD,
-	},
-};
-
-static struct resource sh_keysc_resources[] = {
-	[0] = {
-		.start  = 0x044b0000,
-		.end    = 0x044b000f,
-		.flags  = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start  = 79,
-		.flags  = IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device sh_keysc_device = {
-	.name           = "sh_keysc",
-	.num_resources  = ARRAY_SIZE(sh_keysc_resources),
-	.resource       = sh_keysc_resources,
-	.dev	= {
-		.platform_data	= &sh_keysc_info,
-	},
-};
-
-static struct mtd_partition migor_nor_flash_partitions[] =
-{
-	{
-		.name = "uboot",
-		.offset = 0,
-		.size = (1 * 1024 * 1024),
-		.mask_flags = MTD_WRITEABLE,	/* Read-only */
-	},
-	{
-		.name = "rootfs",
-		.offset = MTDPART_OFS_APPEND,
-		.size = (15 * 1024 * 1024),
-	},
-	{
-		.name = "other",
-		.offset = MTDPART_OFS_APPEND,
-		.size = MTDPART_SIZ_FULL,
-	},
-};
-
-static struct physmap_flash_data migor_nor_flash_data = {
-	.width		= 2,
-	.parts		= migor_nor_flash_partitions,
-	.nr_parts	= ARRAY_SIZE(migor_nor_flash_partitions),
-};
-
-static struct resource migor_nor_flash_resources[] = {
-	[0] = {
-		.name		= "NOR Flash",
-		.start		= 0x00000000,
-		.end		= 0x03ffffff,
-		.flags		= IORESOURCE_MEM,
-	}
-};
-
-static struct platform_device migor_nor_flash_device = {
-	.name		= "physmap-flash",
-	.resource	= migor_nor_flash_resources,
-	.num_resources	= ARRAY_SIZE(migor_nor_flash_resources),
-	.dev		= {
-		.platform_data = &migor_nor_flash_data,
-	},
-};
-
-static struct mtd_partition migor_nand_flash_partitions[] = {
-	{
-		.name		= "nanddata1",
-		.offset		= 0x0,
-		.size		= 512 * 1024 * 1024,
-	},
-	{
-		.name		= "nanddata2",
-		.offset		= MTDPART_OFS_APPEND,
-		.size		= 512 * 1024 * 1024,
-	},
-};
-
-static void migor_nand_flash_cmd_ctl(struct mtd_info *mtd, int cmd,
-				     unsigned int ctrl)
-{
-	struct nand_chip *chip = mtd->priv;
-
-	if (cmd == NAND_CMD_NONE)
-		return;
-
-	if (ctrl & NAND_CLE)
-		writeb(cmd, chip->IO_ADDR_W + 0x00400000);
-	else if (ctrl & NAND_ALE)
-		writeb(cmd, chip->IO_ADDR_W + 0x00800000);
-	else
-		writeb(cmd, chip->IO_ADDR_W);
-}
-
-static int migor_nand_flash_ready(struct mtd_info *mtd)
-{
-	return ctrl_inb(PORT_PADR) & 0x02; /* PTA1 */
-}
-
-struct platform_nand_data migor_nand_flash_data = {
-	.chip = {
-		.nr_chips = 1,
-		.partitions = migor_nand_flash_partitions,
-		.nr_partitions = ARRAY_SIZE(migor_nand_flash_partitions),
-		.chip_delay = 20,
-		.part_probe_types = (const char *[]) { "cmdlinepart", NULL },
-	},
-	.ctrl = {
-		.dev_ready = migor_nand_flash_ready,
-		.cmd_ctrl = migor_nand_flash_cmd_ctl,
-	},
-};
-
-static struct resource migor_nand_flash_resources[] = {
-	[0] = {
-		.name		= "NAND Flash",
-		.start		= 0x18000000,
-		.end		= 0x18ffffff,
-		.flags		= IORESOURCE_MEM,
-	},
-};
-
-static struct platform_device migor_nand_flash_device = {
-	.name		= "gen_nand",
-	.resource	= migor_nand_flash_resources,
-	.num_resources	= ARRAY_SIZE(migor_nand_flash_resources),
-	.dev		= {
-		.platform_data = &migor_nand_flash_data,
-	}
-};
-
-static struct platform_device *migor_devices[] __initdata = {
-	&smc91x_eth_device,
-	&sh_keysc_device,
-	&migor_nor_flash_device,
-	&migor_nand_flash_device,
-};
-
-static struct i2c_board_info __initdata migor_i2c_devices[] = {
-	{
-		I2C_BOARD_INFO("rs5c372b", 0x32),
-	},
-	{
-		I2C_BOARD_INFO("migor_ts", 0x51),
-		.irq = 38, /* IRQ6 */
-	},
-};
-
-static int __init migor_devices_setup(void)
-{
-	i2c_register_board_info(0, migor_i2c_devices,
-				ARRAY_SIZE(migor_i2c_devices));
- 
-	return platform_add_devices(migor_devices, ARRAY_SIZE(migor_devices));
-}
-__initcall(migor_devices_setup);
-
-static void __init migor_setup(char **cmdline_p)
-{
-	/* SMC91C111 - Enable IRQ0 */
-	ctrl_outw(ctrl_inw(PORT_PJCR) & ~0x0003, PORT_PJCR);
-
-	/* KEYSC */
-	ctrl_outw(ctrl_inw(PORT_PYCR) & ~0x0fff, PORT_PYCR);
-	ctrl_outw(ctrl_inw(PORT_PZCR) & ~0x0ff0, PORT_PZCR);
-	ctrl_outw(ctrl_inw(PORT_PSELA) & ~0x4100, PORT_PSELA);
-	ctrl_outw(ctrl_inw(PORT_HIZCRA) & ~0x4000, PORT_HIZCRA);
-	ctrl_outw(ctrl_inw(PORT_HIZCRC) & ~0xc000, PORT_HIZCRC);
-	ctrl_outl(ctrl_inl(MSTPCR2) & ~0x00004000, MSTPCR2);
-
-	/* NAND Flash */
-	ctrl_outw(ctrl_inw(PORT_PXCR) & 0x0fff, PORT_PXCR);
-	ctrl_outl((ctrl_inl(BSC_CS6ABCR) & ~0x00000600) | 0x00000200,
-		  BSC_CS6ABCR);
-
-	/* I2C */
-	ctrl_outl(ctrl_inl(MSTPCR1) & ~0x00000200, MSTPCR1);
-
-	/* Touch Panel - Enable IRQ6 */
-	ctrl_outw(ctrl_inw(PORT_PZCR) & ~0xc, PORT_PZCR);
-	ctrl_outw((ctrl_inw(PORT_PSELA) | 0x8000), PORT_PSELA);
-	ctrl_outw((ctrl_inw(PORT_HIZCRC) & ~0x4000), PORT_HIZCRC);
-}
-
-static struct sh_machine_vector mv_migor __initmv = {
-	.mv_name		= "Migo-R",
-	.mv_setup		= migor_setup,
-};
diff --git a/arch/sh/boards/renesas/r7780rp/psw.c b/arch/sh/boards/renesas/r7780rp/psw.c
deleted file mode 100644
index c844dfa5d58d..000000000000
--- a/arch/sh/boards/renesas/r7780rp/psw.c
+++ /dev/null
@@ -1,122 +0,0 @@
-/*
- * arch/sh/boards/renesas/r7780rp/psw.c
- *
- * push switch support for RDBRP-1/RDBREVRP-1 debug boards.
- *
- * Copyright (C) 2006  Paul Mundt
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-#include <linux/io.h>
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/platform_device.h>
-#include <asm/mach/r7780rp.h>
-#include <asm/push-switch.h>
-
-static irqreturn_t psw_irq_handler(int irq, void *arg)
-{
-	struct platform_device *pdev = arg;
-	struct push_switch *psw = platform_get_drvdata(pdev);
-	struct push_switch_platform_info *psw_info = pdev->dev.platform_data;
-	unsigned int l, mask;
-	int ret = 0;
-
-	l = ctrl_inw(PA_DBSW);
-
-	/* Nothing to do if there's no state change */
-	if (psw->state) {
-		ret = 1;
-		goto out;
-	}
-
-	mask = l & 0x70;
-	/* Figure out who raised it */
-	if (mask & (1 << psw_info->bit)) {
-		psw->state = !!(mask & (1 << psw_info->bit));
-		if (psw->state)	/* debounce */
-			mod_timer(&psw->debounce, jiffies + 50);
-
-		ret = 1;
-	}
-
-out:
-	/* Clear the switch IRQs */
-	l |= (0x7 << 12);
-	ctrl_outw(l, PA_DBSW);
-
-	return IRQ_RETVAL(ret);
-}
-
-static struct resource psw_resources[] = {
-	[0] = {
-		.start	= IRQ_PSW,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct push_switch_platform_info s2_platform_data = {
-	.name		= "s2",
-	.bit		= 6,
-	.irq_flags	= IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING |
-			  IRQF_SHARED,
-	.irq_handler	= psw_irq_handler,
-};
-
-static struct platform_device s2_switch_device = {
-	.name		= "push-switch",
-	.id		= 0,
-	.num_resources	= ARRAY_SIZE(psw_resources),
-	.resource	= psw_resources,
-	.dev		= {
-		.platform_data = &s2_platform_data,
-	},
-};
-
-static struct push_switch_platform_info s3_platform_data = {
-	.name		= "s3",
-	.bit		= 5,
-	.irq_flags	= IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING |
-			  IRQF_SHARED,
-	.irq_handler	= psw_irq_handler,
-};
-
-static struct platform_device s3_switch_device = {
-	.name		= "push-switch",
-	.id		= 1,
-	.num_resources	= ARRAY_SIZE(psw_resources),
-	.resource	= psw_resources,
-	.dev		= {
-		.platform_data = &s3_platform_data,
-	},
-};
-
-static struct push_switch_platform_info s4_platform_data = {
-	.name		= "s4",
-	.bit		= 4,
-	.irq_flags	= IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING |
-			  IRQF_SHARED,
-	.irq_handler	= psw_irq_handler,
-};
-
-static struct platform_device s4_switch_device = {
-	.name		= "push-switch",
-	.id		= 2,
-	.num_resources	= ARRAY_SIZE(psw_resources),
-	.resource	= psw_resources,
-	.dev		= {
-		.platform_data = &s4_platform_data,
-	},
-};
-
-static struct platform_device *psw_devices[] = {
-	&s2_switch_device, &s3_switch_device, &s4_switch_device,
-};
-
-static int __init psw_init(void)
-{
-	return platform_add_devices(psw_devices, ARRAY_SIZE(psw_devices));
-}
-module_init(psw_init);
diff --git a/arch/sh/boards/renesas/systemh/irq.c b/arch/sh/boards/renesas/systemh/irq.c
deleted file mode 100644
index 0ba2fe674c47..000000000000
--- a/arch/sh/boards/renesas/systemh/irq.c
+++ /dev/null
@@ -1,102 +0,0 @@
-/*
- * linux/arch/sh/boards/renesas/systemh/irq.c
- *
- * Copyright (C) 2000  Kazumoto Kojima
- *
- * Hitachi SystemH Support.
- *
- * Modified for 7751 SystemH by
- * Jonathan Short.
- */
-
-#include <linux/init.h>
-#include <linux/irq.h>
-
-#include <linux/hdreg.h>
-#include <linux/ide.h>
-#include <asm/io.h>
-#include <asm/systemh7751.h>
-#include <asm/smc37c93x.h>
-
-/* address of external interrupt mask register
- * address must be set prior to use these (maybe in init_XXX_irq())
- * XXX : is it better to use .config than specifying it in code? */
-static unsigned long *systemh_irq_mask_register = (unsigned long *)0xB3F10004;
-static unsigned long *systemh_irq_request_register = (unsigned long *)0xB3F10000;
-
-/* forward declaration */
-static unsigned int startup_systemh_irq(unsigned int irq);
-static void shutdown_systemh_irq(unsigned int irq);
-static void enable_systemh_irq(unsigned int irq);
-static void disable_systemh_irq(unsigned int irq);
-static void mask_and_ack_systemh(unsigned int);
-static void end_systemh_irq(unsigned int irq);
-
-/* hw_interrupt_type */
-static struct hw_interrupt_type systemh_irq_type = {
-	.typename = " SystemH Register",
-	.startup = startup_systemh_irq,
-	.shutdown = shutdown_systemh_irq,
-	.enable = enable_systemh_irq,
-	.disable = disable_systemh_irq,
-	.ack = mask_and_ack_systemh,
-	.end = end_systemh_irq
-};
-
-static unsigned int startup_systemh_irq(unsigned int irq)
-{
-	enable_systemh_irq(irq);
-	return 0; /* never anything pending */
-}
-
-static void shutdown_systemh_irq(unsigned int irq)
-{
-	disable_systemh_irq(irq);
-}
-
-static void disable_systemh_irq(unsigned int irq)
-{
-	if (systemh_irq_mask_register) {
-		unsigned long val, mask = 0x01 << 1;
-
-		/* Clear the "irq"th bit in the mask and set it in the request */
-		val = ctrl_inl((unsigned long)systemh_irq_mask_register);
-		val &= ~mask;
-		ctrl_outl(val, (unsigned long)systemh_irq_mask_register);
-
-		val = ctrl_inl((unsigned long)systemh_irq_request_register);
-		val |= mask;
-		ctrl_outl(val, (unsigned long)systemh_irq_request_register);
-	}
-}
-
-static void enable_systemh_irq(unsigned int irq)
-{
-	if (systemh_irq_mask_register) {
-		unsigned long val, mask = 0x01 << 1;
-
-		/* Set "irq"th bit in the mask register */
-		val = ctrl_inl((unsigned long)systemh_irq_mask_register);
-		val |= mask;
-		ctrl_outl(val, (unsigned long)systemh_irq_mask_register);
-	}
-}
-
-static void mask_and_ack_systemh(unsigned int irq)
-{
-	disable_systemh_irq(irq);
-}
-
-static void end_systemh_irq(unsigned int irq)
-{
-	if (!(irq_desc[irq].status & (IRQ_DISABLED|IRQ_INPROGRESS)))
-		enable_systemh_irq(irq);
-}
-
-void make_systemh_irq(unsigned int irq)
-{
-	disable_irq_nosync(irq);
-	irq_desc[irq].chip = &systemh_irq_type;
-	disable_systemh_irq(irq);
-}
-
diff --git a/arch/sh/boards/renesas/x3proto/setup.c b/arch/sh/boards/renesas/x3proto/setup.c
deleted file mode 100644
index abc5b6d418fe..000000000000
--- a/arch/sh/boards/renesas/x3proto/setup.c
+++ /dev/null
@@ -1,136 +0,0 @@
-/*
- * arch/sh/boards/renesas/x3proto/setup.c
- *
- * Renesas SH-X3 Prototype Board Support.
- *
- * Copyright (C) 2007 Paul Mundt
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/kernel.h>
-#include <linux/io.h>
-#include <asm/ilsel.h>
-
-static struct resource heartbeat_resources[] = {
-	[0] = {
-		.start	= 0xb8140020,
-		.end	= 0xb8140020,
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
-static struct platform_device heartbeat_device = {
-	.name		= "heartbeat",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(heartbeat_resources),
-	.resource	= heartbeat_resources,
-};
-
-static struct resource smc91x_resources[] = {
-	[0] = {
-		.start		= 0x18000300,
-		.end		= 0x18000300 + 0x10 - 1,
-		.flags		= IORESOURCE_MEM,
-	},
-	[1] = {
-		/* Filled in by ilsel */
-		.flags		= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device smc91x_device = {
-	.name		= "smc91x",
-	.id		= -1,
-	.resource	= smc91x_resources,
-	.num_resources	= ARRAY_SIZE(smc91x_resources),
-};
-
-static struct resource r8a66597_usb_host_resources[] = {
-	[0] = {
-		.name	= "r8a66597_hcd",
-		.start	= 0x18040000,
-		.end	= 0x18080000 - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.name	= "r8a66597_hcd",
-		/* Filled in by ilsel */
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device r8a66597_usb_host_device = {
-	.name		= "r8a66597_hcd",
-	.id		= -1,
-	.dev = {
-		.dma_mask		= NULL,		/* don't use dma */
-		.coherent_dma_mask	= 0xffffffff,
-	},
-	.num_resources	= ARRAY_SIZE(r8a66597_usb_host_resources),
-	.resource	= r8a66597_usb_host_resources,
-};
-
-static struct resource m66592_usb_peripheral_resources[] = {
-	[0] = {
-		.name	= "m66592_udc",
-		.start	= 0x18080000,
-		.end	= 0x180c0000 - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.name	= "m66592_udc",
-		/* Filled in by ilsel */
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device m66592_usb_peripheral_device = {
-	.name		= "m66592_udc",
-	.id		= -1,
-	.dev = {
-		.dma_mask		= NULL,		/* don't use dma */
-		.coherent_dma_mask	= 0xffffffff,
-	},
-	.num_resources	= ARRAY_SIZE(m66592_usb_peripheral_resources),
-	.resource	= m66592_usb_peripheral_resources,
-};
-
-static struct platform_device *x3proto_devices[] __initdata = {
-	&heartbeat_device,
-	&smc91x_device,
-	&r8a66597_usb_host_device,
-	&m66592_usb_peripheral_device,
-};
-
-static int __init x3proto_devices_setup(void)
-{
-	r8a66597_usb_host_resources[1].start =
-		r8a66597_usb_host_resources[1].end = ilsel_enable(ILSEL_USBH_I);
-
-	m66592_usb_peripheral_resources[1].start =
-		m66592_usb_peripheral_resources[1].end = ilsel_enable(ILSEL_USBP_I);
-
-	smc91x_resources[1].start =
-		smc91x_resources[1].end = ilsel_enable(ILSEL_LAN);
-
-	return platform_add_devices(x3proto_devices,
-				    ARRAY_SIZE(x3proto_devices));
-}
-device_initcall(x3proto_devices_setup);
-
-static void __init x3proto_init_irq(void)
-{
-	plat_irq_setup_pins(IRQ_MODE_IRL3210);
-
-	/* Set ICR0.LVLMODE */
-	ctrl_outl(ctrl_inl(0xfe410000) | (1 << 21), 0xfe410000);
-}
-
-static struct sh_machine_vector mv_x3proto __initmv = {
-	.mv_name		= "x3proto",
-	.mv_init_irq		= x3proto_init_irq,
-};
diff --git a/arch/sh/boards/se/7206/io.c b/arch/sh/boards/se/7206/io.c
deleted file mode 100644
index 1308e618e044..000000000000
--- a/arch/sh/boards/se/7206/io.c
+++ /dev/null
@@ -1,104 +0,0 @@
-/* $Id: io.c,v 1.5 2004/02/22 23:08:43 kkojima Exp $
- *
- * linux/arch/sh/boards/se/7206/io.c
- *
- * Copyright (C) 2006 Yoshinori Sato
- *
- * I/O routine for Hitachi 7206 SolutionEngine.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <asm/io.h>
-#include <asm/se7206.h>
-
-
-static inline void delay(void)
-{
-	ctrl_inw(0x20000000);  /* P2 ROM Area */
-}
-
-/* MS7750 requires special versions of in*, out* routines, since
-   PC-like io ports are located at upper half byte of 16-bit word which
-   can be accessed only with 16-bit wide.  */
-
-static inline volatile __u16 *
-port2adr(unsigned int port)
-{
-	if (port >= 0x2000 && port < 0x2020)
-		return (volatile __u16 *) (PA_MRSHPC + (port - 0x2000));
-	else if (port >= 0x300 && port < 0x310)
-		return (volatile __u16 *) (PA_SMSC + (port - 0x300));
-
-	return (volatile __u16 *)port;
-}
-
-unsigned char se7206_inb(unsigned long port)
-{
-	return (*port2adr(port)) & 0xff;
-}
-
-unsigned char se7206_inb_p(unsigned long port)
-{
-	unsigned long v;
-
-	v = (*port2adr(port)) & 0xff;
-	delay();
-	return v;
-}
-
-unsigned short se7206_inw(unsigned long port)
-{
-	return *port2adr(port);;
-}
-
-void se7206_outb(unsigned char value, unsigned long port)
-{
-	*(port2adr(port)) = value;
-}
-
-void se7206_outb_p(unsigned char value, unsigned long port)
-{
-	*(port2adr(port)) = value;
-	delay();
-}
-
-void se7206_outw(unsigned short value, unsigned long port)
-{
-	*port2adr(port) = value;
-}
-
-void se7206_insb(unsigned long port, void *addr, unsigned long count)
-{
-	volatile __u16 *p = port2adr(port);
-	__u8 *ap = addr;
-
-	while (count--)
-		*ap++ = *p;
-}
-
-void se7206_insw(unsigned long port, void *addr, unsigned long count)
-{
-	volatile __u16 *p = port2adr(port);
-	__u16 *ap = addr;
-	while (count--)
-		*ap++ = *p;
-}
-
-void se7206_outsb(unsigned long port, const void *addr, unsigned long count)
-{
-	volatile __u16 *p = port2adr(port);
-	const __u8 *ap = addr;
-
-	while (count--)
-		*p = *ap++;
-}
-
-void se7206_outsw(unsigned long port, const void *addr, unsigned long count)
-{
-	volatile __u16 *p = port2adr(port);
-	const __u16 *ap = addr;
-	while (count--)
-		*p = *ap++;
-}
diff --git a/arch/sh/boards/se/7206/irq.c b/arch/sh/boards/se/7206/irq.c
deleted file mode 100644
index 9d5bfc77d0de..000000000000
--- a/arch/sh/boards/se/7206/irq.c
+++ /dev/null
@@ -1,146 +0,0 @@
-/*
- * linux/arch/sh/boards/se/7206/irq.c
- *
- * Copyright (C) 2005,2006 Yoshinori Sato
- *
- * Hitachi SolutionEngine Support.
- *
- */
-#include <linux/init.h>
-#include <linux/irq.h>
-#include <linux/io.h>
-#include <linux/interrupt.h>
-#include <asm/se7206.h>
-
-#define INTSTS0 0x31800000
-#define INTSTS1 0x31800002
-#define INTMSK0 0x31800004
-#define INTMSK1 0x31800006
-#define INTSEL  0x31800008
-
-#define IRQ0_IRQ 64
-#define IRQ1_IRQ 65
-#define IRQ3_IRQ 67
-
-#define INTC_IPR01 0xfffe0818
-#define INTC_ICR1  0xfffe0802
-
-static void disable_se7206_irq(unsigned int irq)
-{
-	unsigned short val;
-	unsigned short mask = 0xffff ^ (0x0f << 4 * (3 - (IRQ0_IRQ - irq)));
-	unsigned short msk0,msk1;
-
-	/* Set the priority in IPR to 0 */
-	val = ctrl_inw(INTC_IPR01);
-	val &= mask;
-	ctrl_outw(val, INTC_IPR01);
-	/* FPGA mask set */
-	msk0 = ctrl_inw(INTMSK0);
-	msk1 = ctrl_inw(INTMSK1);
-
-	switch (irq) {
-	case IRQ0_IRQ:
-		msk0 |= 0x0010;
-		break;
-	case IRQ1_IRQ:
-		msk0 |= 0x000f;
-		break;
-	case IRQ3_IRQ:
-		msk0 |= 0x0f00;
-		msk1 |= 0x00ff;
-		break;
-	}
-	ctrl_outw(msk0, INTMSK0);
-	ctrl_outw(msk1, INTMSK1);
-}
-
-static void enable_se7206_irq(unsigned int irq)
-{
-	unsigned short val;
-	unsigned short value = (0x0001 << 4 * (3 - (IRQ0_IRQ - irq)));
-	unsigned short msk0,msk1;
-
-	/* Set priority in IPR back to original value */
-	val = ctrl_inw(INTC_IPR01);
-	val |= value;
-	ctrl_outw(val, INTC_IPR01);
-
-	/* FPGA mask reset */
-	msk0 = ctrl_inw(INTMSK0);
-	msk1 = ctrl_inw(INTMSK1);
-
-	switch (irq) {
-	case IRQ0_IRQ:
-		msk0 &= ~0x0010;
-		break;
-	case IRQ1_IRQ:
-		msk0 &= ~0x000f;
-		break;
-	case IRQ3_IRQ:
-		msk0 &= ~0x0f00;
-		msk1 &= ~0x00ff;
-		break;
-	}
-	ctrl_outw(msk0, INTMSK0);
-	ctrl_outw(msk1, INTMSK1);
-}
-
-static void eoi_se7206_irq(unsigned int irq)
-{
-	unsigned short sts0,sts1;
-
-	if (!(irq_desc[irq].status & (IRQ_DISABLED|IRQ_INPROGRESS)))
-		enable_se7206_irq(irq);
-	/* FPGA isr clear */
-	sts0 = ctrl_inw(INTSTS0);
-	sts1 = ctrl_inw(INTSTS1);
-
-	switch (irq) {
-	case IRQ0_IRQ:
-		sts0 &= ~0x0010;
-		break;
-	case IRQ1_IRQ:
-		sts0 &= ~0x000f;
-		break;
-	case IRQ3_IRQ:
-		sts0 &= ~0x0f00;
-		sts1 &= ~0x00ff;
-		break;
-	}
-	ctrl_outw(sts0, INTSTS0);
-	ctrl_outw(sts1, INTSTS1);
-}
-
-static struct irq_chip se7206_irq_chip __read_mostly = {
-	.name		= "SE7206-FPGA",
-	.mask		= disable_se7206_irq,
-	.unmask		= enable_se7206_irq,
-	.mask_ack	= disable_se7206_irq,
-	.eoi		= eoi_se7206_irq,
-};
-
-static void make_se7206_irq(unsigned int irq)
-{
-	disable_irq_nosync(irq);
-	set_irq_chip_and_handler_name(irq, &se7206_irq_chip,
-				      handle_level_irq, "level");
-	disable_se7206_irq(irq);
-}
-
-/*
- * Initialize IRQ setting
- */
-void __init init_se7206_IRQ(void)
-{
-	make_se7206_irq(IRQ0_IRQ); /* SMC91C111 */
-	make_se7206_irq(IRQ1_IRQ); /* ATA */
-	make_se7206_irq(IRQ3_IRQ); /* SLOT / PCM */
-	ctrl_outw(inw(INTC_ICR1) | 0x000b ,INTC_ICR1 ) ; /* ICR1 */
-
-	/* FPGA System register setup*/
-	ctrl_outw(0x0000,INTSTS0); /* Clear INTSTS0 */
-	ctrl_outw(0x0000,INTSTS1); /* Clear INTSTS1 */
-	/* IRQ0=LAN, IRQ1=ATA, IRQ3=SLT,PCM */
-	ctrl_outw(0x0001,INTSEL);
-}
diff --git a/arch/sh/boards/se/7206/setup.c b/arch/sh/boards/se/7206/setup.c
deleted file mode 100644
index 4fe84cc08406..000000000000
--- a/arch/sh/boards/se/7206/setup.c
+++ /dev/null
@@ -1,108 +0,0 @@
-/*
- *
- * linux/arch/sh/boards/se/7206/setup.c
- *
- * Copyright (C) 2006  Yoshinori Sato
- * Copyright (C) 2007 - 2008  Paul Mundt
- *
- * Hitachi 7206 SolutionEngine Support.
- */
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/smc91x.h>
-#include <asm/se7206.h>
-#include <asm/io.h>
-#include <asm/machvec.h>
-#include <asm/heartbeat.h>
-
-static struct resource smc91x_resources[] = {
-	[0] = {
-		.name		= "smc91x-regs",
-		.start		= PA_SMSC + 0x300,
-		.end		= PA_SMSC + 0x300 + 0x020 - 1,
-		.flags		= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start		= 64,
-		.end		= 64,
-		.flags		= IORESOURCE_IRQ,
-	},
-};
-
-static struct smc91x_platdata smc91x_info = {
-	.flags	= SMC91X_USE_16BIT,
-};
-
-static struct platform_device smc91x_device = {
-	.name		= "smc91x",
-	.id		= -1,
-	.dev		= {
-		.dma_mask		= NULL,
-		.coherent_dma_mask	= 0xffffffff,
-		.platform_data		= &smc91x_info,
-	},
-	.num_resources	= ARRAY_SIZE(smc91x_resources),
-	.resource	= smc91x_resources,
-};
-
-static unsigned char heartbeat_bit_pos[] = { 8, 9, 10, 11, 12, 13, 14, 15 };
-
-static struct heartbeat_data heartbeat_data = {
-	.bit_pos	= heartbeat_bit_pos,
-	.nr_bits	= ARRAY_SIZE(heartbeat_bit_pos),
-	.regsize	= 32,
-};
-
-static struct resource heartbeat_resources[] = {
-	[0] = {
-		.start	= PA_LED,
-		.end	= PA_LED,
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
-static struct platform_device heartbeat_device = {
-	.name		= "heartbeat",
-	.id		= -1,
-	.dev	= {
-		.platform_data	= &heartbeat_data,
-	},
-	.num_resources	= ARRAY_SIZE(heartbeat_resources),
-	.resource	= heartbeat_resources,
-};
-
-static struct platform_device *se7206_devices[] __initdata = {
-	&smc91x_device,
-	&heartbeat_device,
-};
-
-static int __init se7206_devices_setup(void)
-{
-	return platform_add_devices(se7206_devices, ARRAY_SIZE(se7206_devices));
-}
-__initcall(se7206_devices_setup);
-
-/*
- * The Machine Vector
- */
-
-static struct sh_machine_vector mv_se __initmv = {
-	.mv_name		= "SolutionEngine",
-	.mv_nr_irqs		= 256,
-	.mv_inb			= se7206_inb,
-	.mv_inw			= se7206_inw,
-	.mv_outb		= se7206_outb,
-	.mv_outw		= se7206_outw,
-
-	.mv_inb_p		= se7206_inb_p,
-	.mv_inw_p		= se7206_inw,
-	.mv_outb_p		= se7206_outb_p,
-	.mv_outw_p		= se7206_outw,
-
-	.mv_insb		= se7206_insb,
-	.mv_insw		= se7206_insw,
-	.mv_outsb		= se7206_outsb,
-	.mv_outsw		= se7206_outsw,
-
-	.mv_init_irq		= init_se7206_IRQ,
-};
diff --git a/arch/sh/boards/se/7343/io.c b/arch/sh/boards/se/7343/io.c
deleted file mode 100644
index 3a6d11424938..000000000000
--- a/arch/sh/boards/se/7343/io.c
+++ /dev/null
@@ -1,273 +0,0 @@
-/*
- * arch/sh/boards/se/7343/io.c
- *
- * I/O routine for SH-Mobile3AS 7343 SolutionEngine.
- *
- */
-#include <linux/kernel.h>
-#include <asm/io.h>
-#include <asm/mach/se7343.h>
-
-#define badio(fn, a) panic("bad i/o operation %s for %08lx.", #fn, a)
-
-struct iop {
-	unsigned long start, end;
-	unsigned long base;
-	struct iop *(*check) (struct iop * p, unsigned long port);
-	unsigned char (*inb) (struct iop * p, unsigned long port);
-	unsigned short (*inw) (struct iop * p, unsigned long port);
-	void (*outb) (struct iop * p, unsigned char value, unsigned long port);
-	void (*outw) (struct iop * p, unsigned short value, unsigned long port);
-};
-
-struct iop *
-simple_check(struct iop *p, unsigned long port)
-{
-	static int count;
-
-	if (count < 100)
-		count++;
-
-	port &= 0xFFFF;
-
-	if ((p->start <= port) && (port <= p->end))
-		return p;
-	else
-		badio(check, port);
-}
-
-struct iop *
-ide_check(struct iop *p, unsigned long port)
-{
-	if (((0x1f0 <= port) && (port <= 0x1f7)) || (port == 0x3f7))
-		return p;
-	return NULL;
-}
-
-unsigned char
-simple_inb(struct iop *p, unsigned long port)
-{
-	return *(unsigned char *) (p->base + port);
-}
-
-unsigned short
-simple_inw(struct iop *p, unsigned long port)
-{
-	return *(unsigned short *) (p->base + port);
-}
-
-void
-simple_outb(struct iop *p, unsigned char value, unsigned long port)
-{
-	*(unsigned char *) (p->base + port) = value;
-}
-
-void
-simple_outw(struct iop *p, unsigned short value, unsigned long port)
-{
-	*(unsigned short *) (p->base + port) = value;
-}
-
-unsigned char
-pcc_inb(struct iop *p, unsigned long port)
-{
-	unsigned long addr = p->base + port + 0x40000;
-	unsigned long v;
-
-	if (port & 1)
-		addr += 0x00400000;
-	v = *(volatile unsigned char *) addr;
-	return v;
-}
-
-void
-pcc_outb(struct iop *p, unsigned char value, unsigned long port)
-{
-	unsigned long addr = p->base + port + 0x40000;
-
-	if (port & 1)
-		addr += 0x00400000;
-	*(volatile unsigned char *) addr = value;
-}
-
-unsigned char
-bad_inb(struct iop *p, unsigned long port)
-{
-	badio(inb, port);
-}
-
-void
-bad_outb(struct iop *p, unsigned char value, unsigned long port)
-{
-	badio(inw, port);
-}
-
-#ifdef CONFIG_SMC91X
-/* MSTLANEX01 LAN at 0xb400:0000 */
-static struct iop laniop = {
-	.start = 0x00,
-	.end = 0x0F,
-	.base = 0x04000000,
-	.check = simple_check,
-	.inb = simple_inb,
-	.inw = simple_inw,
-	.outb = simple_outb,
-	.outw = simple_outw,
-};
-#endif
-
-#ifdef CONFIG_NE2000
-/* NE2000 pc card NIC */
-static struct iop neiop = {
-	.start = 0x280,
-	.end = 0x29f,
-	.base = 0xb0600000 + 0x80,	/* soft 0x280 -> hard 0x300 */
-	.check = simple_check,
-	.inb = pcc_inb,
-	.inw = simple_inw,
-	.outb = pcc_outb,
-	.outw = simple_outw,
-};
-#endif
-
-#ifdef CONFIG_IDE
-/* CF in CF slot */
-static struct iop cfiop = {
-	.base = 0xb0600000,
-	.check = ide_check,
-	.inb = pcc_inb,
-	.inw = simple_inw,
-	.outb = pcc_outb,
-	.outw = simple_outw,
-};
-#endif
-
-static __inline__ struct iop *
-port2iop(unsigned long port)
-{
-	if (0) ;
-#if defined(CONFIG_SMC91X)
-	else if (laniop.check(&laniop, port))
-		return &laniop;
-#endif
-#if defined(CONFIG_NE2000)
-	else if (neiop.check(&neiop, port))
-		return &neiop;
-#endif
-#if defined(CONFIG_IDE)
-	else if (cfiop.check(&cfiop, port))
-		return &cfiop;
-#endif
-	else
-		return NULL;
-}
-
-static inline void
-delay(void)
-{
-	ctrl_inw(0xac000000);
-	ctrl_inw(0xac000000);
-}
-
-unsigned char
-sh7343se_inb(unsigned long port)
-{
-	struct iop *p = port2iop(port);
-	return (p->inb) (p, port);
-}
-
-unsigned char
-sh7343se_inb_p(unsigned long port)
-{
-	unsigned char v = sh7343se_inb(port);
-	delay();
-	return v;
-}
-
-unsigned short
-sh7343se_inw(unsigned long port)
-{
-	struct iop *p = port2iop(port);
-	return (p->inw) (p, port);
-}
-
-unsigned int
-sh7343se_inl(unsigned long port)
-{
-	badio(inl, port);
-}
-
-void
-sh7343se_outb(unsigned char value, unsigned long port)
-{
-	struct iop *p = port2iop(port);
-	(p->outb) (p, value, port);
-}
-
-void
-sh7343se_outb_p(unsigned char value, unsigned long port)
-{
-	sh7343se_outb(value, port);
-	delay();
-}
-
-void
-sh7343se_outw(unsigned short value, unsigned long port)
-{
-	struct iop *p = port2iop(port);
-	(p->outw) (p, value, port);
-}
-
-void
-sh7343se_outl(unsigned int value, unsigned long port)
-{
-	badio(outl, port);
-}
-
-void
-sh7343se_insb(unsigned long port, void *addr, unsigned long count)
-{
-	unsigned char *a = addr;
-	struct iop *p = port2iop(port);
-	while (count--)
-		*a++ = (p->inb) (p, port);
-}
-
-void
-sh7343se_insw(unsigned long port, void *addr, unsigned long count)
-{
-	unsigned short *a = addr;
-	struct iop *p = port2iop(port);
-	while (count--)
-		*a++ = (p->inw) (p, port);
-}
-
-void
-sh7343se_insl(unsigned long port, void *addr, unsigned long count)
-{
-	badio(insl, port);
-}
-
-void
-sh7343se_outsb(unsigned long port, const void *addr, unsigned long count)
-{
-	unsigned char *a = (unsigned char *) addr;
-	struct iop *p = port2iop(port);
-	while (count--)
-		(p->outb) (p, *a++, port);
-}
-
-void
-sh7343se_outsw(unsigned long port, const void *addr, unsigned long count)
-{
-	unsigned short *a = (unsigned short *) addr;
-	struct iop *p = port2iop(port);
-	while (count--)
-		(p->outw) (p, *a++, port);
-}
-
-void
-sh7343se_outsl(unsigned long port, const void *addr, unsigned long count)
-{
-	badio(outsw, port);
-}
diff --git a/arch/sh/boards/se/7343/irq.c b/arch/sh/boards/se/7343/irq.c
deleted file mode 100644
index 763f6deba814..000000000000
--- a/arch/sh/boards/se/7343/irq.c
+++ /dev/null
@@ -1,202 +0,0 @@
-/*
- * arch/sh/boards/se/7343/irq.c
- *
- */
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <asm/irq.h>
-#include <asm/io.h>
-#include <asm/mach/se7343.h>
-
-static void
-disable_intreq_irq(unsigned int irq)
-{
-	int bit = irq - OFFCHIP_IRQ_BASE;
-	u16 val;
-
-	val = ctrl_inw(PA_CPLD_IMSK);
-	val |= 1 << bit;
-	ctrl_outw(val, PA_CPLD_IMSK);
-}
-
-static void
-enable_intreq_irq(unsigned int irq)
-{
-	int bit = irq - OFFCHIP_IRQ_BASE;
-	u16 val;
-
-	val = ctrl_inw(PA_CPLD_IMSK);
-	val &= ~(1 << bit);
-	ctrl_outw(val, PA_CPLD_IMSK);
-}
-
-static void
-mask_and_ack_intreq_irq(unsigned int irq)
-{
-	disable_intreq_irq(irq);
-}
-
-static unsigned int
-startup_intreq_irq(unsigned int irq)
-{
-	enable_intreq_irq(irq);
-	return 0;
-}
-
-static void
-shutdown_intreq_irq(unsigned int irq)
-{
-	disable_intreq_irq(irq);
-}
-
-static void
-end_intreq_irq(unsigned int irq)
-{
-	if (!(irq_desc[irq].status & (IRQ_DISABLED | IRQ_INPROGRESS)))
-		enable_intreq_irq(irq);
-}
-
-static struct hw_interrupt_type intreq_irq_type = {
-	.typename = "FPGA-IRQ",
-	.startup = startup_intreq_irq,
-	.shutdown = shutdown_intreq_irq,
-	.enable = enable_intreq_irq,
-	.disable = disable_intreq_irq,
-	.ack = mask_and_ack_intreq_irq,
-	.end = end_intreq_irq
-};
-
-static void
-make_intreq_irq(unsigned int irq)
-{
-	disable_irq_nosync(irq);
-	irq_desc[irq].chip = &intreq_irq_type;
-	disable_intreq_irq(irq);
-}
-
-int
-shmse_irq_demux(int irq)
-{
-	int bit;
-	volatile u16 val;
-
-	if (irq == IRQ5_IRQ) {
-		/* Read status Register */
-		val = ctrl_inw(PA_CPLD_ST);
-		bit = ffs(val);
-		if (bit != 0)
-			return OFFCHIP_IRQ_BASE + bit - 1;
-	}
-	return irq;
-}
-
-/* IRQ5 is multiplexed between the following sources:
- * 1. PC Card socket
- * 2. Extension slot
- * 3. USB Controller
- * 4. Serial Controller
- *
- * We configure IRQ5 as a cascade IRQ.
- */
-static struct irqaction irq5 = {
-	.handler = no_action,
-	.mask = CPU_MASK_NONE,
-	.name = "IRQ5-cascade",
-};
-
-static struct ipr_data se7343_irq5_ipr_map[] = {
-	{ IRQ5_IRQ, IRQ5_IPR_ADDR+2, IRQ5_IPR_POS, IRQ5_PRIORITY },
-};
-static struct ipr_data se7343_siof0_vpu_ipr_map[] = {
-	{ SIOF0_IRQ, SIOF0_IPR_ADDR, SIOF0_IPR_POS, SIOF0_PRIORITY },
-	{ VPU_IRQ, VPU_IPR_ADDR, VPU_IPR_POS, 8 },
-};
-static struct ipr_data se7343_other_ipr_map[] = {
-	{ DMTE0_IRQ, DMA1_IPR_ADDR, DMA1_IPR_POS, DMA1_PRIORITY },
-	{ DMTE1_IRQ, DMA1_IPR_ADDR, DMA1_IPR_POS, DMA1_PRIORITY },
-	{ DMTE2_IRQ, DMA1_IPR_ADDR, DMA1_IPR_POS, DMA1_PRIORITY },
-	{ DMTE3_IRQ, DMA1_IPR_ADDR, DMA1_IPR_POS, DMA1_PRIORITY },
-	{ DMTE4_IRQ, DMA2_IPR_ADDR, DMA2_IPR_POS, DMA2_PRIORITY },
-	{ DMTE5_IRQ, DMA2_IPR_ADDR, DMA2_IPR_POS, DMA2_PRIORITY },
-
-	/* I2C block */
-	{ IIC0_ALI_IRQ, IIC0_IPR_ADDR, IIC0_IPR_POS, IIC0_PRIORITY },
-	{ IIC0_TACKI_IRQ, IIC0_IPR_ADDR, IIC0_IPR_POS, IIC0_PRIORITY },
-	{ IIC0_WAITI_IRQ, IIC0_IPR_ADDR, IIC0_IPR_POS, IIC0_PRIORITY },
-	{ IIC0_DTEI_IRQ, IIC0_IPR_ADDR, IIC0_IPR_POS, IIC0_PRIORITY },
-
-	{ IIC1_ALI_IRQ, IIC1_IPR_ADDR, IIC1_IPR_POS, IIC1_PRIORITY },
-	{ IIC1_TACKI_IRQ, IIC1_IPR_ADDR, IIC1_IPR_POS, IIC1_PRIORITY },
-	{ IIC1_WAITI_IRQ, IIC1_IPR_ADDR, IIC1_IPR_POS, IIC1_PRIORITY },
-	{ IIC1_DTEI_IRQ, IIC1_IPR_ADDR, IIC1_IPR_POS, IIC1_PRIORITY },
-
-	/* SIOF */
-	{ SIOF0_IRQ, SIOF0_IPR_ADDR, SIOF0_IPR_POS, SIOF0_PRIORITY },
-
-	/* SIU */
-	{ SIU_IRQ, SIU_IPR_ADDR, SIU_IPR_POS, SIU_PRIORITY },
-
-	/* VIO interrupt */
-	{ CEU_IRQ, VIO_IPR_ADDR, VIO_IPR_POS, VIO_PRIORITY },
-	{ BEU_IRQ, VIO_IPR_ADDR, VIO_IPR_POS, VIO_PRIORITY },
-	{ VEU_IRQ, VIO_IPR_ADDR, VIO_IPR_POS, VIO_PRIORITY },
-
-	/*MFI interrupt*/
-
-	{ MFI_IRQ, MFI_IPR_ADDR, MFI_IPR_POS, MFI_PRIORITY },
-
-	/* LCD controller */
-	{ LCDC_IRQ, LCDC_IPR_ADDR, LCDC_IPR_POS, LCDC_PRIORITY },
-};
-
-/*
- * Initialize IRQ setting
- */
-void __init
-init_7343se_IRQ(void)
-{
-	/* Setup Multiplexed interrupts */
-	ctrl_outw(8, PA_CPLD_MODESET);	/* Set all CPLD interrupts to active
-					 * low.
-					 */
-	/* Mask all CPLD controller interrupts */
-	ctrl_outw(0x0fff, PA_CPLD_IMSK);
-
-	/* PC Card interrupts */
-	make_intreq_irq(PC_IRQ0);
-	make_intreq_irq(PC_IRQ1);
-	make_intreq_irq(PC_IRQ2);
-	make_intreq_irq(PC_IRQ3);
-
-	/* Extension Slot Interrupts */
-	make_intreq_irq(EXT_IRQ0);
-	make_intreq_irq(EXT_IRQ1);
-	make_intreq_irq(EXT_IRQ2);
-	make_intreq_irq(EXT_IRQ3);
-
-	/* USB Controller interrupts */
-	make_intreq_irq(USB_IRQ0);
-	make_intreq_irq(USB_IRQ1);
-
-	/* Serial Controller interrupts */
-	make_intreq_irq(UART_IRQ0);
-	make_intreq_irq(UART_IRQ1);
-
-	/* Setup all external interrupts to be active low */
-	ctrl_outw(0xaaaa, INTC_ICR1);
-
-	make_ipr_irq(se7343_irq5_ipr_map, ARRAY_SIZE(se7343_irq5_ipr_map));
-
-	setup_irq(IRQ5_IRQ, &irq5);
-	/* Set port control to use IRQ5 */
-	*(u16 *)0xA4050108 &= ~0xc;
-
-	make_ipr_irq(se7343_siof0_vpu_ipr_map, ARRAY_SIZE(se7343_siof0_vpu_ipr_map));
-
-	ctrl_outb(0x0f, INTC_IMCR5);	/* enable SCIF IRQ */
-
-	make_ipr_irq(se7343_other_ipr_map, ARRAY_SIZE(se7343_other_ipr_map));
-
-	ctrl_outw(0x2000, PA_MRSHPC + 0x0c);	/* mrshpc irq enable */
-}
diff --git a/arch/sh/boards/se/7343/setup.c b/arch/sh/boards/se/7343/setup.c
deleted file mode 100644
index c9431b3a051b..000000000000
--- a/arch/sh/boards/se/7343/setup.c
+++ /dev/null
@@ -1,94 +0,0 @@
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <asm/machvec.h>
-#include <asm/mach/se7343.h>
-#include <asm/irq.h>
-
-void init_7343se_IRQ(void);
-
-static struct resource smc91x_resources[] = {
-	[0] = {
-		.start	= 0x10000000,
-		.end	= 0x1000000F,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		/*
-		 * shared with other devices via externel
-		 * interrupt controller in FPGA...
-		 */
-		.start	= EXT_IRQ2,
-		.end	= EXT_IRQ2,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device smc91x_device = {
-	.name		= "smc91x",
-	.id		= 0,
-	.num_resources	= ARRAY_SIZE(smc91x_resources),
-	.resource	= smc91x_resources,
-};
-
-static struct resource heartbeat_resources[] = {
-	[0] = {
-		.start	= PA_LED,
-		.end	= PA_LED,
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
-static struct platform_device heartbeat_device = {
-	.name		= "heartbeat",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(heartbeat_resources),
-	.resource	= heartbeat_resources,
-};
-
-static struct platform_device *sh7343se_platform_devices[] __initdata = {
-	&smc91x_device,
-	&heartbeat_device,
-};
-
-static int __init sh7343se_devices_setup(void)
-{
-	return platform_add_devices(sh7343se_platform_devices,
-				    ARRAY_SIZE(sh7343se_platform_devices));
-}
-
-static void __init sh7343se_setup(char **cmdline_p)
-{
-	device_initcall(sh7343se_devices_setup);
-}
-
-/*
- * The Machine Vector
- */
-static struct sh_machine_vector mv_7343se __initmv = {
-	.mv_name = "SolutionEngine 7343",
-	.mv_setup = sh7343se_setup,
-	.mv_nr_irqs = 108,
-	.mv_inb = sh7343se_inb,
-	.mv_inw = sh7343se_inw,
-	.mv_inl = sh7343se_inl,
-	.mv_outb = sh7343se_outb,
-	.mv_outw = sh7343se_outw,
-	.mv_outl = sh7343se_outl,
-
-	.mv_inb_p = sh7343se_inb_p,
-	.mv_inw_p = sh7343se_inw,
-	.mv_inl_p = sh7343se_inl,
-	.mv_outb_p = sh7343se_outb_p,
-	.mv_outw_p = sh7343se_outw,
-	.mv_outl_p = sh7343se_outl,
-
-	.mv_insb = sh7343se_insb,
-	.mv_insw = sh7343se_insw,
-	.mv_insl = sh7343se_insl,
-	.mv_outsb = sh7343se_outsb,
-	.mv_outsw = sh7343se_outsw,
-	.mv_outsl = sh7343se_outsl,
-
-	.mv_init_irq = init_7343se_IRQ,
-	.mv_irq_demux = shmse_irq_demux,
-};
diff --git a/arch/sh/boards/se/7619/Makefile b/arch/sh/boards/se/7619/Makefile
deleted file mode 100644
index d21775c28cda..000000000000
--- a/arch/sh/boards/se/7619/Makefile
+++ /dev/null
@@ -1,5 +0,0 @@
-#
-# Makefile for the 7619 SolutionEngine specific parts of the kernel
-#
-
-obj-y	 := setup.o
diff --git a/arch/sh/boards/se/770x/io.c b/arch/sh/boards/se/770x/io.c
deleted file mode 100644
index c4550473d4c3..000000000000
--- a/arch/sh/boards/se/770x/io.c
+++ /dev/null
@@ -1,187 +0,0 @@
-/* $Id: io.c,v 1.7 2006/02/05 21:55:29 lethal Exp $
- *
- * linux/arch/sh/kernel/io_se.c
- *
- * Copyright (C) 2000  Kazumoto Kojima
- *
- * I/O routine for Hitachi SolutionEngine.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <asm/io.h>
-#include <asm/se.h>
-
-/* SH pcmcia io window base, start and end.  */
-int sh_pcic_io_wbase = 0xb8400000;
-int sh_pcic_io_start;
-int sh_pcic_io_stop;
-int sh_pcic_io_type;
-int sh_pcic_io_dummy;
-
-/* MS7750 requires special versions of in*, out* routines, since
-   PC-like io ports are located at upper half byte of 16-bit word which
-   can be accessed only with 16-bit wide.  */
-
-static inline volatile __u16 *
-port2adr(unsigned int port)
-{
-	if (port & 0xff000000)
-		return ( volatile __u16 *) port;
-	if (port >= 0x2000)
-		return (volatile __u16 *) (PA_MRSHPC + (port - 0x2000));
-	else if (port >= 0x1000)
-		return (volatile __u16 *) (PA_83902 + (port << 1));
-	else if (sh_pcic_io_start <= port && port <= sh_pcic_io_stop)
-		return (volatile __u16 *) (sh_pcic_io_wbase + (port &~ 1));
-	else
-		return (volatile __u16 *) (PA_SUPERIO + (port << 1));
-}
-
-static inline int
-shifted_port(unsigned long port)
-{
-	/* For IDE registers, value is not shifted */
-	if ((0x1f0 <= port && port < 0x1f8) || port == 0x3f6)
-		return 0;
-	else
-		return 1;
-}
-
-unsigned char se_inb(unsigned long port)
-{
-	if (sh_pcic_io_start <= port && port <= sh_pcic_io_stop)
-		return *(__u8 *) (sh_pcic_io_wbase + 0x40000 + port); 
-	else if (shifted_port(port))
-		return (*port2adr(port) >> 8); 
-	else
-		return (*port2adr(port))&0xff; 
-}
-
-unsigned char se_inb_p(unsigned long port)
-{
-	unsigned long v;
-
-	if (sh_pcic_io_start <= port && port <= sh_pcic_io_stop)
-		v = *(__u8 *) (sh_pcic_io_wbase + 0x40000 + port); 
-	else if (shifted_port(port))
-		v = (*port2adr(port) >> 8); 
-	else
-		v = (*port2adr(port))&0xff; 
-	ctrl_delay();
-	return v;
-}
-
-unsigned short se_inw(unsigned long port)
-{
-	if (port >= 0x2000 ||
-	    (sh_pcic_io_start <= port && port <= sh_pcic_io_stop))
-		return *port2adr(port);
-	else
-		maybebadio(port);
-	return 0;
-}
-
-unsigned int se_inl(unsigned long port)
-{
-	maybebadio(port);
-	return 0;
-}
-
-void se_outb(unsigned char value, unsigned long port)
-{
-	if (sh_pcic_io_start <= port && port <= sh_pcic_io_stop)
-		*(__u8 *)(sh_pcic_io_wbase + port) = value; 
-	else if (shifted_port(port))
-		*(port2adr(port)) = value << 8;
-	else
-		*(port2adr(port)) = value;
-}
-
-void se_outb_p(unsigned char value, unsigned long port)
-{
-	if (sh_pcic_io_start <= port && port <= sh_pcic_io_stop)
-		*(__u8 *)(sh_pcic_io_wbase + port) = value; 
-	else if (shifted_port(port))
-		*(port2adr(port)) = value << 8;
-	else
-		*(port2adr(port)) = value;
-	ctrl_delay();
-}
-
-void se_outw(unsigned short value, unsigned long port)
-{
-	if (port >= 0x2000 ||
-	    (sh_pcic_io_start <= port && port <= sh_pcic_io_stop))
-		*port2adr(port) = value;
-	else
-		maybebadio(port);
-}
-
-void se_outl(unsigned int value, unsigned long port)
-{
-	maybebadio(port);
-}
-
-void se_insb(unsigned long port, void *addr, unsigned long count)
-{
-	volatile __u16 *p = port2adr(port);
-	__u8 *ap = addr;
-
-	if (sh_pcic_io_start <= port && port <= sh_pcic_io_stop) {
-		volatile __u8 *bp = (__u8 *) (sh_pcic_io_wbase + 0x40000 + port); 
-		while (count--)
-			*ap++ = *bp;
-	} else if (shifted_port(port)) {
-		while (count--)
-			*ap++ = *p >> 8;
-	} else {
-		while (count--)
-			*ap++ = *p;
-	}
-}
-
-void se_insw(unsigned long port, void *addr, unsigned long count)
-{
-	volatile __u16 *p = port2adr(port);
-	__u16 *ap = addr;
-	while (count--)
-		*ap++ = *p;
-}
-
-void se_insl(unsigned long port, void *addr, unsigned long count)
-{
-	maybebadio(port);
-}
-
-void se_outsb(unsigned long port, const void *addr, unsigned long count)
-{
-	volatile __u16 *p = port2adr(port);
-	const __u8 *ap = addr;
-
-	if (sh_pcic_io_start <= port && port <= sh_pcic_io_stop) {
-		volatile __u8 *bp = (__u8 *) (sh_pcic_io_wbase + port); 
-		while (count--)
-			*bp = *ap++;
-	} else if (shifted_port(port)) {
-		while (count--)
-			*p = *ap++ << 8;
-	} else {
-		while (count--)
-			*p = *ap++;
-	}
-}
-
-void se_outsw(unsigned long port, const void *addr, unsigned long count)
-{
-	volatile __u16 *p = port2adr(port);
-	const __u16 *ap = addr;
-	while (count--)
-		*p = *ap++;
-}
-
-void se_outsl(unsigned long port, const void *addr, unsigned long count)
-{
-	maybebadio(port);
-}
diff --git a/arch/sh/boards/se/770x/irq.c b/arch/sh/boards/se/770x/irq.c
deleted file mode 100644
index cdb0807928a5..000000000000
--- a/arch/sh/boards/se/770x/irq.c
+++ /dev/null
@@ -1,108 +0,0 @@
-/*
- * linux/arch/sh/boards/se/770x/irq.c
- *
- * Copyright (C) 2000  Kazumoto Kojima
- * Copyright (C) 2006  Nobuhiro Iwamatsu
- *
- * Hitachi SolutionEngine Support.
- *
- */
-
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <asm/irq.h>
-#include <asm/io.h>
-#include <asm/se.h>
-
-static struct ipr_data ipr_irq_table[] = {
-	/*
-	* Super I/O (Just mimic PC):
-	*  1: keyboard
-	*  3: serial 0
-	*  4: serial 1
-	*  5: printer
-	*  6: floppy
-	*  8: rtc
-	* 12: mouse
-	* 14: ide0
-	*/
-#if defined(CONFIG_CPU_SUBTYPE_SH7705)
-	/* This is default value */
-	{ 13, 0, 8,  0x0f-13, },
-	{ 5 , 0, 4,  0x0f- 5, },
-	{ 10, 1, 0,  0x0f-10, },
-	{ 7 , 2, 4,  0x0f- 7, },
-	{ 3 , 2, 0,  0x0f- 3, },
-	{ 1 , 3, 12, 0x0f- 1, },
-	{ 12, 3, 4,  0x0f-12, }, /* LAN */
-	{ 2 , 4, 8,  0x0f- 2, }, /* PCIRQ2 */
-	{ 6 , 4, 4,  0x0f- 6, }, /* PCIRQ1 */
-	{ 14, 4, 0,  0x0f-14, }, /* PCIRQ0 */
-	{ 0 , 5, 12, 0x0f   , }, 
-	{ 4 , 5, 4,  0x0f- 4, },
-	{ 8 , 6, 12, 0x0f- 8, },
-	{ 9 , 6, 8,  0x0f- 9, },
-	{ 11, 6, 4,  0x0f-11, },
-#else
-	{ 14, 0,  8, 0x0f-14, },
-	{ 12, 0,  4, 0x0f-12, },
-	{  8, 1,  4, 0x0f- 8, },
-	{  6, 2, 12, 0x0f- 6, },
-	{  5, 2,  8, 0x0f- 5, },
-	{  4, 2,  4, 0x0f- 4, },
-	{  3, 2,  0, 0x0f- 3, },
-	{  1, 3, 12, 0x0f- 1, },
-#if defined(CONFIG_STNIC)
-	/* ST NIC */
-	{ 10, 3,  4, 0x0f-10, }, 	/* LAN */
-#endif
-	/* MRSHPC IRQs setting */
-	{  0, 4, 12, 0x0f- 0, },	/* PCIRQ3 */
-	{ 11, 4,  8, 0x0f-11, }, 	/* PCIRQ2 */
-	{  9, 4,  4, 0x0f- 9, }, 	/* PCIRQ1 */
-	{  7, 4,  0, 0x0f- 7, }, 	/* PCIRQ0 */
-	/* #2, #13 are allocated for SLOT IRQ #1 and #2 (for now) */
-	/* NOTE: #2 and #13 are not used on PC */
-	{ 13, 6,  4, 0x0f-13, }, 	/* SLOTIRQ2 */
-	{  2, 6,  0, 0x0f- 2, }, 	/* SLOTIRQ1 */
-#endif
-};
-
-static unsigned long ipr_offsets[] = {
-	BCR_ILCRA,
-	BCR_ILCRB,
-	BCR_ILCRC,
-	BCR_ILCRD,
-	BCR_ILCRE,
-	BCR_ILCRF,
-	BCR_ILCRG,
-};
-
-static struct ipr_desc ipr_irq_desc = {
-	.ipr_offsets	= ipr_offsets,
-	.nr_offsets	= ARRAY_SIZE(ipr_offsets),
-
-	.ipr_data	= ipr_irq_table,
-	.nr_irqs	= ARRAY_SIZE(ipr_irq_table),
-	.chip = {
-		.name	= "IPR-se770x",
-	},
-};
-
-/*
- * Initialize IRQ setting
- */
-void __init init_se_IRQ(void)
-{
-	/* Disable all interrupts */
-	ctrl_outw(0, BCR_ILCRA);
-	ctrl_outw(0, BCR_ILCRB);
-	ctrl_outw(0, BCR_ILCRC);
-	ctrl_outw(0, BCR_ILCRD);
-	ctrl_outw(0, BCR_ILCRE);
-	ctrl_outw(0, BCR_ILCRF);
-	ctrl_outw(0, BCR_ILCRG);
-
-	register_ipr_controller(&ipr_irq_desc);
-}
diff --git a/arch/sh/boards/se/770x/setup.c b/arch/sh/boards/se/770x/setup.c
deleted file mode 100644
index 318bc8a3969c..000000000000
--- a/arch/sh/boards/se/770x/setup.c
+++ /dev/null
@@ -1,169 +0,0 @@
-/*
- * linux/arch/sh/boards/se/770x/setup.c
- *
- * Copyright (C) 2000  Kazumoto Kojima
- *
- * Hitachi SolutionEngine Support.
- *
- */
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <asm/machvec.h>
-#include <asm/se.h>
-#include <asm/io.h>
-#include <asm/smc37c93x.h>
-#include <asm/heartbeat.h>
-
-void init_se_IRQ(void);
-
-/*
- * Configure the Super I/O chip
- */
-static void __init smsc_config(int index, int data)
-{
-	outb_p(index, INDEX_PORT);
-	outb_p(data, DATA_PORT);
-}
-
-/* XXX: Another candidate for a more generic cchip machine vector */
-static void __init smsc_setup(char **cmdline_p)
-{
-	outb_p(CONFIG_ENTER, CONFIG_PORT);
-	outb_p(CONFIG_ENTER, CONFIG_PORT);
-
-	/* FDC */
-	smsc_config(CURRENT_LDN_INDEX, LDN_FDC);
-	smsc_config(ACTIVATE_INDEX, 0x01);
-	smsc_config(IRQ_SELECT_INDEX, 6); /* IRQ6 */
-
-	/* AUXIO (GPIO): to use IDE1 */
-	smsc_config(CURRENT_LDN_INDEX, LDN_AUXIO);
-	smsc_config(GPIO46_INDEX, 0x00); /* nIOROP */
-	smsc_config(GPIO47_INDEX, 0x00); /* nIOWOP */
-
-	/* COM1 */
-	smsc_config(CURRENT_LDN_INDEX, LDN_COM1);
-	smsc_config(ACTIVATE_INDEX, 0x01);
-	smsc_config(IO_BASE_HI_INDEX, 0x03);
-	smsc_config(IO_BASE_LO_INDEX, 0xf8);
-	smsc_config(IRQ_SELECT_INDEX, 4); /* IRQ4 */
-
-	/* COM2 */
-	smsc_config(CURRENT_LDN_INDEX, LDN_COM2);
-	smsc_config(ACTIVATE_INDEX, 0x01);
-	smsc_config(IO_BASE_HI_INDEX, 0x02);
-	smsc_config(IO_BASE_LO_INDEX, 0xf8);
-	smsc_config(IRQ_SELECT_INDEX, 3); /* IRQ3 */
-
-	/* RTC */
-	smsc_config(CURRENT_LDN_INDEX, LDN_RTC);
-	smsc_config(ACTIVATE_INDEX, 0x01);
-	smsc_config(IRQ_SELECT_INDEX, 8); /* IRQ8 */
-
-	/* XXX: PARPORT, KBD, and MOUSE will come here... */
-	outb_p(CONFIG_EXIT, CONFIG_PORT);
-}
-
-
-static struct resource cf_ide_resources[] = {
-	[0] = {
-		.start  = PA_MRSHPC_IO + 0x1f0,
-		.end    = PA_MRSHPC_IO + 0x1f0 + 8,
-		.flags  = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start  = PA_MRSHPC_IO + 0x1f0 + 0x206,
-		.end    = PA_MRSHPC_IO + 0x1f0 +8 + 0x206 + 8,
-		.flags  = IORESOURCE_MEM,
-	},
-	[2] = {
-		.start  = IRQ_CFCARD,
-		.flags  = IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device cf_ide_device  = {
-	.name           = "pata_platform",
-	.id             = -1,
-	.num_resources  = ARRAY_SIZE(cf_ide_resources),
-	.resource       = cf_ide_resources,
-};
-
-static unsigned char heartbeat_bit_pos[] = { 8, 9, 10, 11, 12, 13, 14, 15 };
-
-static struct heartbeat_data heartbeat_data = {
-	.bit_pos	= heartbeat_bit_pos,
-	.nr_bits	= ARRAY_SIZE(heartbeat_bit_pos),
-	.regsize	= 16,
-};
-
-static struct resource heartbeat_resources[] = {
-	[0] = {
-		.start	= PA_LED,
-		.end	= PA_LED,
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
-static struct platform_device heartbeat_device = {
-	.name		= "heartbeat",
-	.id		= -1,
-	.dev	= {
-		.platform_data	= &heartbeat_data,
-	},
-	.num_resources	= ARRAY_SIZE(heartbeat_resources),
-	.resource	= heartbeat_resources,
-};
-
-static struct platform_device *se_devices[] __initdata = {
-	&heartbeat_device,
-	&cf_ide_device,
-};
-
-static int __init se_devices_setup(void)
-{
-	return platform_add_devices(se_devices, ARRAY_SIZE(se_devices));
-}
-device_initcall(se_devices_setup);
-
-/*
- * The Machine Vector
- */
-static struct sh_machine_vector mv_se __initmv = {
-	.mv_name		= "SolutionEngine",
-	.mv_setup		= smsc_setup,
-#if defined(CONFIG_CPU_SH4)
-	.mv_nr_irqs		= 48,
-#elif defined(CONFIG_CPU_SUBTYPE_SH7708)
-	.mv_nr_irqs		= 32,
-#elif defined(CONFIG_CPU_SUBTYPE_SH7709)
-	.mv_nr_irqs		= 61,
-#elif defined(CONFIG_CPU_SUBTYPE_SH7705)
-	.mv_nr_irqs		= 86,
-#elif defined(CONFIG_CPU_SUBTYPE_SH7710) || defined(CONFIG_CPU_SUBTYPE_SH7712)
-	.mv_nr_irqs             = 104,
-#endif
-
-	.mv_inb			= se_inb,
-	.mv_inw			= se_inw,
-	.mv_inl			= se_inl,
-	.mv_outb		= se_outb,
-	.mv_outw		= se_outw,
-	.mv_outl		= se_outl,
-
-	.mv_inb_p		= se_inb_p,
-	.mv_inw_p		= se_inw,
-	.mv_inl_p		= se_inl,
-	.mv_outb_p		= se_outb_p,
-	.mv_outw_p		= se_outw,
-	.mv_outl_p		= se_outl,
-
-	.mv_insb		= se_insb,
-	.mv_insw		= se_insw,
-	.mv_insl		= se_insl,
-	.mv_outsb		= se_outsb,
-	.mv_outsw		= se_outsw,
-	.mv_outsl		= se_outsl,
-
-	.mv_init_irq		= init_se_IRQ,
-};
diff --git a/arch/sh/boards/se/7721/irq.c b/arch/sh/boards/se/7721/irq.c
deleted file mode 100644
index c4fdd622bf8b..000000000000
--- a/arch/sh/boards/se/7721/irq.c
+++ /dev/null
@@ -1,45 +0,0 @@
-/*
- * linux/arch/sh/boards/se/7721/irq.c
- *
- * Copyright (C) 2008  Renesas Solutions Corp.
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-#include <linux/init.h>
-#include <linux/irq.h>
-#include <linux/interrupt.h>
-#include <linux/io.h>
-#include <asm/se7721.h>
-
-enum {
-	UNUSED = 0,
-
-	/* board specific interrupt sources */
-	MRSHPC,
-};
-
-static struct intc_vect vectors[] __initdata = {
-	INTC_IRQ(MRSHPC, MRSHPC_IRQ0),
-};
-
-static struct intc_prio_reg prio_registers[] __initdata = {
-	{ FPGA_ILSR6, 0, 8, 4, /* IRLMSK */
-	  { 0, MRSHPC } },
-};
-
-static DECLARE_INTC_DESC(intc_desc, "SE7721", vectors,
-			 NULL, NULL, prio_registers, NULL);
-
-/*
- * Initialize IRQ setting
- */
-void __init init_se7721_IRQ(void)
-{
-	/* PPCR */
-	ctrl_outw(ctrl_inw(0xa4050118) & ~0x00ff, 0xa4050118);
-
-	register_intc_controller(&intc_desc);
-	intc_set_priority(MRSHPC_IRQ0, 0xf - MRSHPC_IRQ0);
-}
diff --git a/arch/sh/boards/se/7721/setup.c b/arch/sh/boards/se/7721/setup.c
deleted file mode 100644
index 1be3e92752f7..000000000000
--- a/arch/sh/boards/se/7721/setup.c
+++ /dev/null
@@ -1,99 +0,0 @@
-/*
- * linux/arch/sh/boards/se/7721/setup.c
- *
- * Copyright (C) 2008 Renesas Solutions Corp.
- *
- * Hitachi UL SolutionEngine 7721 Support.
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- */
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <asm/machvec.h>
-#include <asm/se7721.h>
-#include <asm/io.h>
-#include <asm/heartbeat.h>
-
-static unsigned char heartbeat_bit_pos[] = { 8, 9, 10, 11, 12, 13, 14, 15 };
-
-static struct heartbeat_data heartbeat_data = {
-	.bit_pos	= heartbeat_bit_pos,
-	.nr_bits	= ARRAY_SIZE(heartbeat_bit_pos),
-	.regsize	= 16,
-};
-
-static struct resource heartbeat_resources[] = {
-	[0] = {
-		.start	= PA_LED,
-		.end	= PA_LED,
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
-static struct platform_device heartbeat_device = {
-	.name		= "heartbeat",
-	.id		= -1,
-	.dev	= {
-		.platform_data	= &heartbeat_data,
-	},
-	.num_resources	= ARRAY_SIZE(heartbeat_resources),
-	.resource	= heartbeat_resources,
-};
-
-static struct resource cf_ide_resources[] = {
-	[0] = {
-		.start	= PA_MRSHPC_IO + 0x1f0,
-		.end	= PA_MRSHPC_IO + 0x1f0 + 8 ,
-		.flags	= IORESOURCE_IO,
-	},
-	[1] = {
-		.start	= PA_MRSHPC_IO + 0x1f0 + 0x206,
-		.end	= PA_MRSHPC_IO + 0x1f0 + 8 + 0x206 + 8,
-		.flags	= IORESOURCE_IO,
-	},
-	[2] = {
-		.start  = MRSHPC_IRQ0,
-		.flags  = IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device cf_ide_device = {
-	.name		= "pata_platform",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(cf_ide_resources),
-	.resource	= cf_ide_resources,
-};
-
-static struct platform_device *se7721_devices[] __initdata = {
-	&cf_ide_device,
-	&heartbeat_device
-};
-
-static int __init se7721_devices_setup(void)
-{
-	return platform_add_devices(se7721_devices,
-		ARRAY_SIZE(se7721_devices));
-}
-device_initcall(se7721_devices_setup);
-
-static void __init se7721_setup(char **cmdline_p)
-{
-	/* for USB */
-	ctrl_outw(0x0000, 0xA405010C);	/* PGCR */
-	ctrl_outw(0x0000, 0xA405010E);	/* PHCR */
-	ctrl_outw(0x00AA, 0xA4050118);	/* PPCR */
-	ctrl_outw(0x0000, 0xA4050124);	/* PSELA */
-}
-
-/*
- * The Machine Vector
- */
-struct sh_machine_vector mv_se7721 __initmv = {
-	.mv_name		= "Solution Engine 7721",
-	.mv_setup		= se7721_setup,
-	.mv_nr_irqs		= 109,
-	.mv_init_irq		= init_se7721_IRQ,
-};
diff --git a/arch/sh/boards/se/7722/irq.c b/arch/sh/boards/se/7722/irq.c
deleted file mode 100644
index 0b03f3f610b8..000000000000
--- a/arch/sh/boards/se/7722/irq.c
+++ /dev/null
@@ -1,76 +0,0 @@
-/*
- * linux/arch/sh/boards/se/7722/irq.c
- *
- * Copyright (C) 2007  Nobuhiro Iwamatsu
- *
- * Hitachi UL SolutionEngine 7722 Support.
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-#include <linux/init.h>
-#include <linux/irq.h>
-#include <linux/interrupt.h>
-#include <asm/irq.h>
-#include <asm/io.h>
-#include <asm/se7722.h>
-
-static void disable_se7722_irq(unsigned int irq)
-{
-	unsigned int bit = irq - SE7722_FPGA_IRQ_BASE;
-	ctrl_outw(ctrl_inw(IRQ01_MASK) | 1 << bit, IRQ01_MASK);
-}
-
-static void enable_se7722_irq(unsigned int irq)
-{
-	unsigned int bit = irq - SE7722_FPGA_IRQ_BASE;
-	ctrl_outw(ctrl_inw(IRQ01_MASK) & ~(1 << bit), IRQ01_MASK);
-}
-
-static struct irq_chip se7722_irq_chip __read_mostly = {
-	.name           = "SE7722-FPGA",
-	.mask           = disable_se7722_irq,
-	.unmask         = enable_se7722_irq,
-	.mask_ack       = disable_se7722_irq,
-};
-
-static void se7722_irq_demux(unsigned int irq, struct irq_desc *desc)
-{
-	unsigned short intv = ctrl_inw(IRQ01_STS);
-	struct irq_desc *ext_desc;
-	unsigned int ext_irq = SE7722_FPGA_IRQ_BASE;
-
-	intv &= (1 << SE7722_FPGA_IRQ_NR) - 1;
-
-	while (intv) {
-		if (intv & 1) {
-			ext_desc = irq_desc + ext_irq;
-			handle_level_irq(ext_irq, ext_desc);
-		}
-		intv >>= 1;
-		ext_irq++;
-	}
-}
-
-/*
- * Initialize IRQ setting
- */
-void __init init_se7722_IRQ(void)
-{
-	int i;
-
-	ctrl_outw(0, IRQ01_MASK);       /* disable all irqs */
-	ctrl_outw(0x2000, 0xb03fffec);  /* mrshpc irq enable */
-
-	for (i = 0; i < SE7722_FPGA_IRQ_NR; i++)
-		set_irq_chip_and_handler_name(SE7722_FPGA_IRQ_BASE + i,
-					      &se7722_irq_chip,
-					      handle_level_irq, "level");
-
-	set_irq_chained_handler(IRQ0_IRQ, se7722_irq_demux);
-	set_irq_type(IRQ0_IRQ, IRQ_TYPE_LEVEL_LOW);
-
-	set_irq_chained_handler(IRQ1_IRQ, se7722_irq_demux);
-	set_irq_type(IRQ1_IRQ, IRQ_TYPE_LEVEL_LOW);
-}
diff --git a/arch/sh/boards/se/7722/setup.c b/arch/sh/boards/se/7722/setup.c
deleted file mode 100644
index ede3957fc14a..000000000000
--- a/arch/sh/boards/se/7722/setup.c
+++ /dev/null
@@ -1,196 +0,0 @@
-/*
- * linux/arch/sh/boards/se/7722/setup.c
- *
- * Copyright (C) 2007 Nobuhiro Iwamatsu
- *
- * Hitachi UL SolutionEngine 7722 Support.
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- */
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/ata_platform.h>
-#include <linux/input.h>
-#include <linux/smc91x.h>
-#include <asm/machvec.h>
-#include <asm/se7722.h>
-#include <asm/io.h>
-#include <asm/heartbeat.h>
-#include <asm/sh_keysc.h>
-
-/* Heartbeat */
-static struct heartbeat_data heartbeat_data = {
-	.regsize = 16,
-};
-
-static struct resource heartbeat_resources[] = {
-	[0] = {
-		.start  = PA_LED,
-		.end    = PA_LED,
-		.flags  = IORESOURCE_MEM,
-	},
-};
-
-static struct platform_device heartbeat_device = {
-	.name           = "heartbeat",
-	.id             = -1,
-	.dev = {
-		.platform_data = &heartbeat_data,
-	},
-	.num_resources  = ARRAY_SIZE(heartbeat_resources),
-	.resource       = heartbeat_resources,
-};
-
-/* SMC91x */
-static struct smc91x_platdata smc91x_info = {
-	.flags = SMC91X_USE_16BIT,
-};
-
-static struct resource smc91x_eth_resources[] = {
-	[0] = {
-		.name   = "smc91x-regs" ,
-		.start  = PA_LAN + 0x300,
-		.end    = PA_LAN + 0x300 + 0x10 ,
-		.flags  = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start  = SMC_IRQ,
-		.end    = SMC_IRQ,
-		.flags  = IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device smc91x_eth_device = {
-	.name           = "smc91x",
-	.id             = 0,
-	.dev = {
-		.dma_mask               = NULL,         /* don't use dma */
-		.coherent_dma_mask      = 0xffffffff,
-		.platform_data	= &smc91x_info,
-	},
-	.num_resources  = ARRAY_SIZE(smc91x_eth_resources),
-	.resource       = smc91x_eth_resources,
-};
-
-static struct resource cf_ide_resources[] = {
-	[0] = {
-		.start  = PA_MRSHPC_IO + 0x1f0,
-		.end    = PA_MRSHPC_IO + 0x1f0 + 8 ,
-		.flags  = IORESOURCE_IO,
-	},
-	[1] = {
-		.start  = PA_MRSHPC_IO + 0x1f0 + 0x206,
-		.end    = PA_MRSHPC_IO + 0x1f0 +8 + 0x206 + 8,
-		.flags  = IORESOURCE_IO,
-	},
-	[2] = {
-		.start  = MRSHPC_IRQ0,
-		.end    = MRSHPC_IRQ0,
-		.flags  = IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device cf_ide_device  = {
-	.name           = "pata_platform",
-	.id             = -1,
-	.num_resources  = ARRAY_SIZE(cf_ide_resources),
-	.resource       = cf_ide_resources,
-};
-
-static struct sh_keysc_info sh_keysc_info = {
-	.mode = SH_KEYSC_MODE_1, /* KEYOUT0->5, KEYIN0->4 */
-	.scan_timing = 3,
-	.delay = 5,
-	.keycodes = { /* SW1 -> SW30 */
-		KEY_A, KEY_B, KEY_C, KEY_D, KEY_E,
-		KEY_F, KEY_G, KEY_H, KEY_I, KEY_J,
-		KEY_K, KEY_L, KEY_M, KEY_N, KEY_O,
-		KEY_P, KEY_Q, KEY_R, KEY_S, KEY_T,
-		KEY_U, KEY_V, KEY_W, KEY_X, KEY_Y,
-		KEY_Z,
-		KEY_HOME, KEY_SLEEP, KEY_WAKEUP, KEY_COFFEE, /* life */
-	},
-};
-
-static struct resource sh_keysc_resources[] = {
-	[0] = {
-		.start  = 0x044b0000,
-		.end    = 0x044b000f,
-		.flags  = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start  = 79,
-		.flags  = IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device sh_keysc_device = {
-	.name           = "sh_keysc",
-	.num_resources  = ARRAY_SIZE(sh_keysc_resources),
-	.resource       = sh_keysc_resources,
-	.dev	= {
-		.platform_data	= &sh_keysc_info,
-	},
-};
-
-static struct platform_device *se7722_devices[] __initdata = {
-	&heartbeat_device,
-	&smc91x_eth_device,
-	&cf_ide_device,
-	&sh_keysc_device,
-};
-
-static int __init se7722_devices_setup(void)
-{
-	return platform_add_devices(se7722_devices,
-		ARRAY_SIZE(se7722_devices));
-}
-device_initcall(se7722_devices_setup);
-
-static void __init se7722_setup(char **cmdline_p)
-{
-	ctrl_outw(0x010D, FPGA_OUT);    /* FPGA */
-
-	ctrl_outl(0x00051001, MSTPCR0);
-	ctrl_outl(0x00000000, MSTPCR1);
-	/* KEYSC, VOU, BEU, CEU, VEU, VPU, LCDC, USB */
-	ctrl_outl(0xffffb7c0, MSTPCR2);
-
-	ctrl_outw(0x0000, PORT_PECR);   /* PORT E 1 = IRQ5 ,E 0 = BS */
-	ctrl_outw(0x1000, PORT_PJCR);   /* PORT J 1 = IRQ1,J 0 =IRQ0 */
-
-	/* LCDC I/O */
-	ctrl_outw(0x0020, PORT_PSELD);
-
-	/* SIOF1*/
-	ctrl_outw(0x0003, PORT_PSELB);
-	ctrl_outw(0xe000, PORT_PSELC);
-	ctrl_outw(0x0000, PORT_PKCR);
-
-	/* LCDC */
-	ctrl_outw(0x4020, PORT_PHCR);
-	ctrl_outw(0x0000, PORT_PLCR);
-	ctrl_outw(0x0000, PORT_PMCR);
-	ctrl_outw(0x0002, PORT_PRCR);
-	ctrl_outw(0x0000, PORT_PXCR);   /* LCDC,CS6A */
-
-	/* KEYSC */
-	ctrl_outw(0x0A10, PORT_PSELA); /* BS,SHHID2 */
-	ctrl_outw(0x0000, PORT_PYCR);
-	ctrl_outw(0x0000, PORT_PZCR);
-	ctrl_outw(ctrl_inw(PORT_HIZCRA) & ~0x4000, PORT_HIZCRA);
-	ctrl_outw(ctrl_inw(PORT_HIZCRC) & ~0xc000, PORT_HIZCRC);
-}
-
-/*
- * The Machine Vector
- */
-static struct sh_machine_vector mv_se7722 __initmv = {
-	.mv_name                = "Solution Engine 7722" ,
-	.mv_setup               = se7722_setup ,
-	.mv_nr_irqs		= SE7722_FPGA_IRQ_BASE + SE7722_FPGA_IRQ_NR,
-	.mv_init_irq		= init_se7722_IRQ,
-};
diff --git a/arch/sh/boards/se/7751/io.c b/arch/sh/boards/se/7751/io.c
deleted file mode 100644
index e8d846cec89d..000000000000
--- a/arch/sh/boards/se/7751/io.c
+++ /dev/null
@@ -1,135 +0,0 @@
-/*
- * Copyright (C) 2001  Ian da Silva, Jeremy Siegel
- * Based largely on io_se.c.
- *
- * I/O routine for Hitachi 7751 SolutionEngine.
- *
- * Initial version only to support LAN access; some
- * placeholder code from io_se.c left in with the
- * expectation of later SuperIO and PCMCIA access.
- */
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/pci.h>
-#include <asm/io.h>
-#include <asm/se7751.h>
-#include <asm/addrspace.h>
-
-static inline volatile u16 *port2adr(unsigned int port)
-{
-	if (port >= 0x2000)
-		return (volatile __u16 *) (PA_MRSHPC + (port - 0x2000));
-	maybebadio((unsigned long)port);
-	return (volatile __u16*)port;
-}
-
-/*
- * General outline: remap really low stuff [eventually] to SuperIO,
- * stuff in PCI IO space (at or above window at pci.h:PCIBIOS_MIN_IO)
- * is mapped through the PCI IO window.  Stuff with high bits (PXSEG)
- * should be way beyond the window, and is used  w/o translation for
- * compatibility.
- */
-unsigned char sh7751se_inb(unsigned long port)
-{
-	if (PXSEG(port))
-		return *(volatile unsigned char *)port;
-	else if (is_pci_ioaddr(port))
-		return *(volatile unsigned char *)pci_ioaddr(port);
-	else
-		return (*port2adr(port)) & 0xff;
-}
-
-unsigned char sh7751se_inb_p(unsigned long port)
-{
-	unsigned char v;
-
-        if (PXSEG(port))
-                v = *(volatile unsigned char *)port;
-	else if (is_pci_ioaddr(port))
-                v = *(volatile unsigned char *)pci_ioaddr(port);
-	else
-		v = (*port2adr(port)) & 0xff;
-	ctrl_delay();
-	return v;
-}
-
-unsigned short sh7751se_inw(unsigned long port)
-{
-        if (PXSEG(port))
-                return *(volatile unsigned short *)port;
-	else if (is_pci_ioaddr(port))
-                return *(volatile unsigned short *)pci_ioaddr(port);
-	else if (port >= 0x2000)
-		return *port2adr(port);
-	else
-		maybebadio(port);
-	return 0;
-}
-
-unsigned int sh7751se_inl(unsigned long port)
-{
-        if (PXSEG(port))
-                return *(volatile unsigned long *)port;
-	else if (is_pci_ioaddr(port))
-                return *(volatile unsigned int *)pci_ioaddr(port);
-	else if (port >= 0x2000)
-		return *port2adr(port);
-	else
-		maybebadio(port);
-	return 0;
-}
-
-void sh7751se_outb(unsigned char value, unsigned long port)
-{
-
-        if (PXSEG(port))
-                *(volatile unsigned char *)port = value;
-	else if (is_pci_ioaddr(port))
-		*((unsigned char*)pci_ioaddr(port)) = value;
-	else
-		*(port2adr(port)) = value;
-}
-
-void sh7751se_outb_p(unsigned char value, unsigned long port)
-{
-        if (PXSEG(port))
-                *(volatile unsigned char *)port = value;
-	else if (is_pci_ioaddr(port))
-		*((unsigned char*)pci_ioaddr(port)) = value;
-	else
-		*(port2adr(port)) = value;
-	ctrl_delay();
-}
-
-void sh7751se_outw(unsigned short value, unsigned long port)
-{
-        if (PXSEG(port))
-                *(volatile unsigned short *)port = value;
-	else if (is_pci_ioaddr(port))
-		*((unsigned short *)pci_ioaddr(port)) = value;
-	else if (port >= 0x2000)
-		*port2adr(port) = value;
-	else
-		maybebadio(port);
-}
-
-void sh7751se_outl(unsigned int value, unsigned long port)
-{
-        if (PXSEG(port))
-                *(volatile unsigned long *)port = value;
-	else if (is_pci_ioaddr(port))
-		*((unsigned long*)pci_ioaddr(port)) = value;
-	else
-		maybebadio(port);
-}
-
-void sh7751se_insl(unsigned long port, void *addr, unsigned long count)
-{
-	maybebadio(port);
-}
-
-void sh7751se_outsl(unsigned long port, const void *addr, unsigned long count)
-{
-	maybebadio(port);
-}
diff --git a/arch/sh/boards/se/7751/irq.c b/arch/sh/boards/se/7751/irq.c
deleted file mode 100644
index c3d12590e5db..000000000000
--- a/arch/sh/boards/se/7751/irq.c
+++ /dev/null
@@ -1,50 +0,0 @@
-/*
- * linux/arch/sh/boards/se/7751/irq.c
- *
- * Copyright (C) 2000  Kazumoto Kojima
- *
- * Hitachi SolutionEngine Support.
- *
- * Modified for 7751 Solution Engine by
- * Ian da Silva and Jeremy Siegel, 2001.
- */
-
-#include <linux/init.h>
-#include <linux/irq.h>
-#include <asm/irq.h>
-#include <asm/se7751.h>
-
-static struct ipr_data ipr_irq_table[] = {
-	{ 13, 3, 3, 2 },
-	/* Add additional entries here as drivers are added and tested. */
-};
-
-static unsigned long ipr_offsets[] = {
-	BCR_ILCRA,
-	BCR_ILCRB,
-	BCR_ILCRC,
-	BCR_ILCRD,
-	BCR_ILCRE,
-	BCR_ILCRF,
-	BCR_ILCRG,
-};
-
-static struct ipr_desc ipr_irq_desc = {
-	.ipr_offsets	= ipr_offsets,
-	.nr_offsets	= ARRAY_SIZE(ipr_offsets),
-
-	.ipr_data	= ipr_irq_table,
-	.nr_irqs	= ARRAY_SIZE(ipr_irq_table),
-
-	.chip = {
-		.name	= "IPR-se7751",
-	},
-};
-
-/*
- * Initialize IRQ setting
- */
-void __init init_7751se_IRQ(void)
-{
-	register_ipr_controller(&ipr_irq_desc);
-}
diff --git a/arch/sh/boards/se/7751/setup.c b/arch/sh/boards/se/7751/setup.c
deleted file mode 100644
index deefbfd92591..000000000000
--- a/arch/sh/boards/se/7751/setup.c
+++ /dev/null
@@ -1,78 +0,0 @@
-/*
- * linux/arch/sh/boards/se/7751/setup.c
- *
- * Copyright (C) 2000  Kazumoto Kojima
- *
- * Hitachi SolutionEngine Support.
- *
- * Modified for 7751 Solution Engine by
- * Ian da Silva and Jeremy Siegel, 2001.
- */
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <asm/machvec.h>
-#include <asm/se7751.h>
-#include <asm/io.h>
-#include <asm/heartbeat.h>
-
-static unsigned char heartbeat_bit_pos[] = { 8, 9, 10, 11, 12, 13, 14, 15 };
-
-static struct heartbeat_data heartbeat_data = {
-	.bit_pos	= heartbeat_bit_pos,
-	.nr_bits	= ARRAY_SIZE(heartbeat_bit_pos),
-};
-
-static struct resource heartbeat_resources[] = {
-	[0] = {
-		.start	= PA_LED,
-		.end	= PA_LED,
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
-static struct platform_device heartbeat_device = {
-	.name		= "heartbeat",
-	.id		= -1,
-	.dev	= {
-		.platform_data	= &heartbeat_data,
-	},
-	.num_resources	= ARRAY_SIZE(heartbeat_resources),
-	.resource	= heartbeat_resources,
-};
-
-static struct platform_device *se7751_devices[] __initdata = {
-	&heartbeat_device,
-};
-
-static int __init se7751_devices_setup(void)
-{
-	return platform_add_devices(se7751_devices, ARRAY_SIZE(se7751_devices));
-}
-__initcall(se7751_devices_setup);
-
-/*
- * The Machine Vector
- */
-static struct sh_machine_vector mv_7751se __initmv = {
-	.mv_name		= "7751 SolutionEngine",
-	.mv_nr_irqs		= 72,
-
-	.mv_inb			= sh7751se_inb,
-	.mv_inw			= sh7751se_inw,
-	.mv_inl			= sh7751se_inl,
-	.mv_outb		= sh7751se_outb,
-	.mv_outw		= sh7751se_outw,
-	.mv_outl		= sh7751se_outl,
-
-	.mv_inb_p		= sh7751se_inb_p,
-	.mv_inw_p		= sh7751se_inw,
-	.mv_inl_p		= sh7751se_inl,
-	.mv_outb_p		= sh7751se_outb_p,
-	.mv_outw_p		= sh7751se_outw,
-	.mv_outl_p		= sh7751se_outl,
-
-	.mv_insl		= sh7751se_insl,
-	.mv_outsl		= sh7751se_outsl,
-
-	.mv_init_irq		= init_7751se_IRQ,
-};
diff --git a/arch/sh/boards/se/7780/irq.c b/arch/sh/boards/se/7780/irq.c
deleted file mode 100644
index 6bd70da6bb47..000000000000
--- a/arch/sh/boards/se/7780/irq.c
+++ /dev/null
@@ -1,46 +0,0 @@
-/*
- * linux/arch/sh/boards/se/7780/irq.c
- *
- * Copyright (C) 2006,2007  Nobuhiro Iwamatsu
- *
- * Hitachi UL SolutionEngine 7780 Support.
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-#include <linux/init.h>
-#include <linux/irq.h>
-#include <linux/interrupt.h>
-#include <asm/irq.h>
-#include <asm/io.h>
-#include <asm/se7780.h>
-
-/*
- * Initialize IRQ setting
- */
-void __init init_se7780_IRQ(void)
-{
-	/* enable all interrupt at FPGA */
-	ctrl_outw(0, FPGA_INTMSK1);
-	/* mask SM501 interrupt */
-	ctrl_outw((ctrl_inw(FPGA_INTMSK1) | 0x0002), FPGA_INTMSK1);
-	/* enable all interrupt at FPGA */
-	ctrl_outw(0, FPGA_INTMSK2);
-
-	/* set FPGA INTSEL register */
-	/* FPGA + 0x06 */
-	ctrl_outw( ((IRQPIN_SM501 << IRQPOS_SM501) |
-		(IRQPIN_SMC91CX << IRQPOS_SMC91CX)), FPGA_INTSEL1);
-
-	/* FPGA + 0x08 */
-	ctrl_outw(((IRQPIN_EXTINT4 << IRQPOS_EXTINT4) |
-		(IRQPIN_EXTINT3 << IRQPOS_EXTINT3) |
-		(IRQPIN_EXTINT2 << IRQPOS_EXTINT2) |
-		(IRQPIN_EXTINT1 << IRQPOS_EXTINT1)), FPGA_INTSEL2);
-
-	/* FPGA + 0x0A */
-	ctrl_outw((IRQPIN_PCCPW << IRQPOS_PCCPW), FPGA_INTSEL3);
-
-	plat_irq_setup_pins(IRQ_MODE_IRQ); /* install handlers for IRQ0-7 */
-}
diff --git a/arch/sh/boards/se/7780/setup.c b/arch/sh/boards/se/7780/setup.c
deleted file mode 100644
index 0f08ab3b2bec..000000000000
--- a/arch/sh/boards/se/7780/setup.c
+++ /dev/null
@@ -1,124 +0,0 @@
-/*
- * linux/arch/sh/boards/se/7780/setup.c
- *
- * Copyright (C) 2006,2007  Nobuhiro Iwamatsu
- *
- * Hitachi UL SolutionEngine 7780 Support.
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <asm/machvec.h>
-#include <asm/se7780.h>
-#include <asm/io.h>
-#include <asm/heartbeat.h>
-
-/* Heartbeat */
-static struct heartbeat_data heartbeat_data = {
-	.regsize = 16,
-};
-
-static struct resource heartbeat_resources[] = {
-	[0] = {
-		.start  = PA_LED,
-		.end    = PA_LED,
-		.flags  = IORESOURCE_MEM,
-	},
-};
-
-static struct platform_device heartbeat_device = {
-	.name           = "heartbeat",
-	.id             = -1,
-	.dev = {
-		.platform_data = &heartbeat_data,
-	},
-	.num_resources  = ARRAY_SIZE(heartbeat_resources),
-	.resource       = heartbeat_resources,
-};
-
-/* SMC91x */
-static struct resource smc91x_eth_resources[] = {
-	[0] = {
-		.name   = "smc91x-regs" ,
-		.start  = PA_LAN + 0x300,
-		.end    = PA_LAN + 0x300 + 0x10 ,
-		.flags  = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start  = SMC_IRQ,
-		.end    = SMC_IRQ,
-		.flags  = IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device smc91x_eth_device = {
-	.name           = "smc91x",
-	.id             = 0,
-	.dev = {
-		.dma_mask               = NULL,         /* don't use dma */
-		.coherent_dma_mask      = 0xffffffff,
-	},
-	.num_resources  = ARRAY_SIZE(smc91x_eth_resources),
-	.resource       = smc91x_eth_resources,
-};
-
-static struct platform_device *se7780_devices[] __initdata = {
-	&heartbeat_device,
-	&smc91x_eth_device,
-};
-
-static int __init se7780_devices_setup(void)
-{
-	return platform_add_devices(se7780_devices,
-		ARRAY_SIZE(se7780_devices));
-}
-device_initcall(se7780_devices_setup);
-
-#define GPIO_PHCR        0xFFEA000E
-#define GPIO_PMSELR      0xFFEA0080
-#define GPIO_PECR        0xFFEA0008
-
-static void __init se7780_setup(char **cmdline_p)
-{
-	/* "SH-Linux" on LED Display */
-	ctrl_outw( 'S' , PA_LED_DISP + (DISP_SEL0_ADDR << 1) );
-	ctrl_outw( 'H' , PA_LED_DISP + (DISP_SEL1_ADDR << 1) );
-	ctrl_outw( '-' , PA_LED_DISP + (DISP_SEL2_ADDR << 1) );
-	ctrl_outw( 'L' , PA_LED_DISP + (DISP_SEL3_ADDR << 1) );
-	ctrl_outw( 'i' , PA_LED_DISP + (DISP_SEL4_ADDR << 1) );
-	ctrl_outw( 'n' , PA_LED_DISP + (DISP_SEL5_ADDR << 1) );
-	ctrl_outw( 'u' , PA_LED_DISP + (DISP_SEL6_ADDR << 1) );
-	ctrl_outw( 'x' , PA_LED_DISP + (DISP_SEL7_ADDR << 1) );
-
-	printk(KERN_INFO "Hitachi UL Solutions Engine 7780SE03 support.\n");
-
-	/*
-	 * PCI REQ/GNT setting
-	 *   REQ0/GNT0 -> USB
-	 *   REQ1/GNT1 -> PC Card
-	 *   REQ2/GNT2 -> Serial ATA
-	 *   REQ3/GNT3 -> PCI slot
-	 */
-	ctrl_outw(0x0213, FPGA_REQSEL);
-
-	/* GPIO setting */
-	ctrl_outw(0x0000, GPIO_PECR);
-	ctrl_outw(ctrl_inw(GPIO_PHCR)&0xfff3, GPIO_PHCR);
-	ctrl_outw(0x0c00, GPIO_PMSELR);
-
-	/* iVDR Power ON */
-	ctrl_outw(0x0001, FPGA_IVDRPW);
-}
-
-/*
- * The Machine Vector
- */
-static struct sh_machine_vector mv_se7780 __initmv = {
-	.mv_name                = "Solution Engine 7780" ,
-	.mv_setup               = se7780_setup ,
-	.mv_nr_irqs		= 111 ,
-	.mv_init_irq		= init_se7780_IRQ,
-};
diff --git a/arch/sh/boards/sh03/setup.c b/arch/sh/boards/sh03/setup.c
deleted file mode 100644
index 934ac4f1c48f..000000000000
--- a/arch/sh/boards/sh03/setup.c
+++ /dev/null
@@ -1,75 +0,0 @@
-/*
- * linux/arch/sh/boards/sh03/setup.c
- *
- * Copyright (C) 2004  Interface Co.,Ltd. Saito.K
- *
- */
-
-#include <linux/init.h>
-#include <linux/irq.h>
-#include <linux/pci.h>
-#include <linux/platform_device.h>
-#include <asm/io.h>
-#include <asm/rtc.h>
-#include <asm/sh03/io.h>
-#include <asm/sh03/sh03.h>
-#include <asm/addrspace.h>
-
-static void __init init_sh03_IRQ(void)
-{
-	plat_irq_setup_pins(IRQ_MODE_IRQ);
-}
-
-extern void *cf_io_base;
-
-static void __iomem *sh03_ioport_map(unsigned long port, unsigned int size)
-{
-	if (PXSEG(port))
-		return (void __iomem *)port;
-	/* CompactFlash (IDE) */
-	if (((port >= 0x1f0) && (port <= 0x1f7)) || (port == 0x3f6))
-		return (void __iomem *)((unsigned long)cf_io_base + port);
-
-        return (void __iomem *)(port + PCI_IO_BASE);
-}
-
-/* arch/sh/boards/sh03/rtc.c */
-void sh03_time_init(void);
-
-static void __init sh03_setup(char **cmdline_p)
-{
-	board_time_init = sh03_time_init;
-}
-
-static struct resource heartbeat_resources[] = {
-	[0] = {
-		.start	= 0xa0800000,
-		.end	= 0xa0800000,
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
-static struct platform_device heartbeat_device = {
-	.name		= "heartbeat",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(heartbeat_resources),
-	.resource	= heartbeat_resources,
-};
-
-static struct platform_device *sh03_devices[] __initdata = {
-	&heartbeat_device,
-};
-
-static int __init sh03_devices_setup(void)
-{
-	return platform_add_devices(sh03_devices, ARRAY_SIZE(sh03_devices));
-}
-__initcall(sh03_devices_setup);
-
-static struct sh_machine_vector mv_sh03 __initmv = {
-	.mv_name		= "Interface (CTP/PCI-SH03)",
-	.mv_setup		= sh03_setup,
-	.mv_nr_irqs		= 48,
-	.mv_ioport_map		= sh03_ioport_map,
-	.mv_init_irq		= init_sh03_IRQ,
-};
diff --git a/arch/sh/boards/shmin/Makefile b/arch/sh/boards/shmin/Makefile
deleted file mode 100644
index 3190cc72430e..000000000000
--- a/arch/sh/boards/shmin/Makefile
+++ /dev/null
@@ -1,5 +0,0 @@
-#
-# Makefile for the SHMIN board.
-#
-
-obj-y	 := setup.o
diff --git a/arch/sh/boards/snapgear/setup.c b/arch/sh/boards/snapgear/setup.c
deleted file mode 100644
index 7022483f98e8..000000000000
--- a/arch/sh/boards/snapgear/setup.c
+++ /dev/null
@@ -1,95 +0,0 @@
-/*
- * linux/arch/sh/boards/snapgear/setup.c
- *
- * Copyright (C) 2002  David McCullough <davidm@snapgear.com>
- * Copyright (C) 2003  Paul Mundt <lethal@linux-sh.org>
- *
- * Based on files with the following comments:
- *
- *           Copyright (C) 2000  Kazumoto Kojima
- *
- *           Modified for 7751 Solution Engine by
- *           Ian da Silva and Jeremy Siegel, 2001.
- */
-#include <linux/init.h>
-#include <linux/irq.h>
-#include <linux/interrupt.h>
-#include <linux/timer.h>
-#include <linux/delay.h>
-#include <linux/module.h>
-#include <linux/sched.h>
-#include <asm/machvec.h>
-#include <asm/snapgear.h>
-#include <asm/irq.h>
-#include <asm/io.h>
-#include <asm/cpu/timer.h>
-
-/*
- * EraseConfig handling functions
- */
-
-static irqreturn_t eraseconfig_interrupt(int irq, void *dev_id)
-{
-	(void)ctrl_inb(0xb8000000);	/* dummy read */
-
-	printk("SnapGear: erase switch interrupt!\n");
-
-	return IRQ_HANDLED;
-}
-
-static int __init eraseconfig_init(void)
-{
-	printk("SnapGear: EraseConfig init\n");
-	/* Setup "EraseConfig" switch on external IRQ 0 */
-	if (request_irq(IRL0_IRQ, eraseconfig_interrupt, IRQF_DISABLED,
-				"Erase Config", NULL))
-		printk("SnapGear: failed to register IRQ%d for Reset witch\n",
-				IRL0_IRQ);
-	else
-		printk("SnapGear: registered EraseConfig switch on IRQ%d\n",
-				IRL0_IRQ);
-	return(0);
-}
-
-module_init(eraseconfig_init);
-
-/****************************************************************************/
-/*
- * Initialize IRQ setting
- *
- * IRL0 = erase switch
- * IRL1 = eth0
- * IRL2 = eth1
- * IRL3 = crypto
- */
-
-static void __init init_snapgear_IRQ(void)
-{
-	printk("Setup SnapGear IRQ/IPR ...\n");
-	/* enable individual interrupt mode for externals */
-	plat_irq_setup_pins(IRQ_MODE_IRQ);
-}
-
-/*
- * The Machine Vector
- */
-static struct sh_machine_vector mv_snapgear __initmv = {
-	.mv_name		= "SnapGear SecureEdge5410",
-	.mv_nr_irqs		= 72,
-
-	.mv_inb			= snapgear_inb,
-	.mv_inw			= snapgear_inw,
-	.mv_inl			= snapgear_inl,
-	.mv_outb		= snapgear_outb,
-	.mv_outw		= snapgear_outw,
-	.mv_outl		= snapgear_outl,
-
-	.mv_inb_p		= snapgear_inb_p,
-	.mv_inw_p		= snapgear_inw,
-	.mv_inl_p		= snapgear_inl,
-	.mv_outb_p		= snapgear_outb_p,
-	.mv_outw_p		= snapgear_outw,
-	.mv_outl_p		= snapgear_outl,
-
-	.mv_init_irq		= init_snapgear_IRQ,
-};
diff --git a/arch/sh/boot/Makefile b/arch/sh/boot/Makefile
index 89b408620dcb..5b54965eef98 100644
--- a/arch/sh/boot/Makefile
+++ b/arch/sh/boot/Makefile
@@ -18,9 +18,10 @@ CONFIG_PAGE_OFFSET	?= 0x80000000
 CONFIG_MEMORY_START	?= 0x0c000000
 CONFIG_BOOT_LINK_OFFSET	?= 0x00800000
 CONFIG_ZERO_PAGE_OFFSET	?= 0x00001000
+CONFIG_ENTRY_OFFSET	?= 0x00001000
 
 export CONFIG_PAGE_OFFSET CONFIG_MEMORY_START CONFIG_BOOT_LINK_OFFSET \
-       CONFIG_ZERO_PAGE_OFFSET
+       CONFIG_ZERO_PAGE_OFFSET CONFIG_ENTRY_OFFSET
 
 targets := zImage vmlinux.srec uImage uImage.srec
 subdir- := compressed
@@ -40,7 +41,7 @@ KERNEL_LOAD	:= $(shell /bin/bash -c 'printf "0x%08x" \
 KERNEL_ENTRY	:= $(shell /bin/bash -c 'printf "0x%08x" \
 		     $$[$(CONFIG_PAGE_OFFSET)  + \
 			$(CONFIG_MEMORY_START) + \
-			$(CONFIG_ZERO_PAGE_OFFSET)+0x1000]')
+			$(CONFIG_ZERO_PAGE_OFFSET) + $(CONFIG_ENTRY_OFFSET)]')
 
 quiet_cmd_uimage = UIMAGE  $@
       cmd_uimage = $(CONFIG_SHELL) $(MKIMAGE) -A sh -O linux -T kernel \
diff --git a/arch/sh/boot/compressed/Makefile_32 b/arch/sh/boot/compressed/Makefile_32
index c0d25fb1aa60..47685f618ae7 100644
--- a/arch/sh/boot/compressed/Makefile_32
+++ b/arch/sh/boot/compressed/Makefile_32
@@ -35,8 +35,7 @@ $(obj)/vmlinux.bin: vmlinux FORCE
 $(obj)/vmlinux.bin.gz: $(obj)/vmlinux.bin FORCE
 	$(call if_changed,gzip)
 
-LDFLAGS_piggy.o := -r --format binary --oformat elf32-sh-linux -T
 OBJCOPYFLAGS += -R .empty_zero_page
 
-$(obj)/piggy.o: $(obj)/vmlinux.scr $(obj)/vmlinux.bin.gz FORCE
-	$(call if_changed,ld)
+$(obj)/piggy.o: $(obj)/piggy.S $(obj)/vmlinux.bin.gz FORCE
+	$(call if_changed,as_o_S)
diff --git a/arch/sh/boot/compressed/Makefile_64 b/arch/sh/boot/compressed/Makefile_64
index 912f3e205a0d..658d4f915556 100644
--- a/arch/sh/boot/compressed/Makefile_64
+++ b/arch/sh/boot/compressed/Makefile_64
@@ -37,8 +37,7 @@ $(obj)/vmlinux.bin: vmlinux FORCE
 $(obj)/vmlinux.bin.gz: $(obj)/vmlinux.bin FORCE
 	$(call if_changed,gzip)
 
-LDFLAGS_piggy.o := -r --format binary --oformat elf32-sh64-linux -T
 OBJCOPYFLAGS += -R .empty_zero_page
 
-$(obj)/piggy.o: $(obj)/vmlinux.scr $(obj)/vmlinux.bin.gz FORCE
-	$(call if_changed,ld)
+$(obj)/piggy.o: $(obj)/piggy.S $(obj)/vmlinux.bin.gz FORCE
+	$(call if_changed,as_o_S)
diff --git a/arch/sh/boot/compressed/head_64.S b/arch/sh/boot/compressed/head_64.S
index f72c1989f5f2..622eac3cf556 100644
--- a/arch/sh/boot/compressed/head_64.S
+++ b/arch/sh/boot/compressed/head_64.S
@@ -14,8 +14,8 @@
  *   Copyright (C) 2002 Stuart Menefy (stuart.menefy@st.com)
  */
 #include <asm/cache.h>
-#include <asm/cpu/mmu_context.h>
-#include <asm/cpu/registers.h>
+#include <cpu/mmu_context.h>
+#include <cpu/registers.h>
 
 /*
  * Fixed TLB entries to identity map the beginning of RAM
diff --git a/arch/sh/boot/compressed/misc_32.c b/arch/sh/boot/compressed/misc_32.c
index adcea31e663e..f386997e4d9c 100644
--- a/arch/sh/boot/compressed/misc_32.c
+++ b/arch/sh/boot/compressed/misc_32.c
@@ -74,8 +74,6 @@ static unsigned outcnt = 0;  /* bytes in output buffer */
 static int  fill_inbuf(void);
 static void flush_window(void);
 static void error(char *m);
-static void gzip_mark(void **);
-static void gzip_release(void **);
 
 extern char input_data[];
 extern int input_len;
@@ -84,11 +82,7 @@ static long bytes_out = 0;
 static uch *output_data;
 static unsigned long output_ptr = 0;
 
-static void *malloc(int size);
-static void free(void *where);
 static void error(char *m);
-static void gzip_mark(void **);
-static void gzip_release(void **);
 
 int puts(const char *);
 
@@ -101,38 +95,6 @@ static unsigned long free_mem_end_ptr;
 
 #include "../../../../lib/inflate.c"
 
-static void *malloc(int size)
-{
-	void *p;
-
-	if (size <0) error("Malloc error");
-	if (free_mem_ptr == 0) error("Memory error");
-
-	free_mem_ptr = (free_mem_ptr + 3) & ~3;	/* Align */
-
-	p = (void *)free_mem_ptr;
-	free_mem_ptr += size;
-
-	if (free_mem_ptr >= free_mem_end_ptr)
-		error("Out of memory");
-
-	return p;
-}
-
-static void free(void *where)
-{	/* Don't care */
-}
-
-static void gzip_mark(void **ptr)
-{
-	*ptr = (void *) free_mem_ptr;
-}
-
-static void gzip_release(void **ptr)
-{
-	free_mem_ptr = (long) *ptr;
-}
-
 #ifdef CONFIG_SH_STANDARD_BIOS
 size_t strlen(const char *s)
 {
diff --git a/arch/sh/boot/compressed/misc_64.c b/arch/sh/boot/compressed/misc_64.c
index a006ef89b9dd..2941657e18aa 100644
--- a/arch/sh/boot/compressed/misc_64.c
+++ b/arch/sh/boot/compressed/misc_64.c
@@ -72,8 +72,6 @@ static unsigned outcnt = 0;	/* bytes in output buffer */
 static int fill_inbuf(void);
 static void flush_window(void);
 static void error(char *m);
-static void gzip_mark(void **);
-static void gzip_release(void **);
 
 extern char input_data[];
 extern int input_len;
@@ -82,11 +80,7 @@ static long bytes_out = 0;
 static uch *output_data;
 static unsigned long output_ptr = 0;
 
-static void *malloc(int size);
-static void free(void *where);
 static void error(char *m);
-static void gzip_mark(void **);
-static void gzip_release(void **);
 
 static void puts(const char *);
 
@@ -99,40 +93,6 @@ static unsigned long free_mem_end_ptr;
 
 #include "../../../../lib/inflate.c"
 
-static void *malloc(int size)
-{
-	void *p;
-
-	if (size < 0)
-		error("Malloc error\n");
-	if (free_mem_ptr == 0)
-		error("Memory error\n");
-
-	free_mem_ptr = (free_mem_ptr + 3) & ~3;	/* Align */
-
-	p = (void *) free_mem_ptr;
-	free_mem_ptr += size;
-
-	if (free_mem_ptr >= free_mem_end_ptr)
-		error("\nOut of memory\n");
-
-	return p;
-}
-
-static void free(void *where)
-{				/* Don't care */
-}
-
-static void gzip_mark(void **ptr)
-{
-	*ptr = (void *) free_mem_ptr;
-}
-
-static void gzip_release(void **ptr)
-{
-	free_mem_ptr = (long) *ptr;
-}
-
 void puts(const char *s)
 {
 }
diff --git a/arch/sh/boot/compressed/piggy.S b/arch/sh/boot/compressed/piggy.S
new file mode 100644
index 000000000000..566071926b13
--- /dev/null
+++ b/arch/sh/boot/compressed/piggy.S
@@ -0,0 +1,8 @@
+	.global	input_len, input_data
+	.data
+input_len:
+	.long	input_data_end - input_data
+input_data:
+	.incbin	"arch/sh/boot/compressed/vmlinux.bin.gz"
+input_data_end:
+	.end
diff --git a/arch/sh/boot/compressed/vmlinux.scr b/arch/sh/boot/compressed/vmlinux.scr
deleted file mode 100644
index 1ed9d791f863..000000000000
--- a/arch/sh/boot/compressed/vmlinux.scr
+++ /dev/null
@@ -1,9 +0,0 @@
-SECTIONS
-{
-  .data : { 
-	input_len = .;
-	LONG(input_data_end - input_data) input_data = .; 
-	*(.data) 
-	input_data_end = .; 
-	}
-}
diff --git a/arch/sh/configs/ap325rxa_defconfig b/arch/sh/configs/ap325rxa_defconfig
new file mode 100644
index 000000000000..29926a9b9ce2
--- /dev/null
+++ b/arch/sh/configs/ap325rxa_defconfig
@@ -0,0 +1,964 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.26
+# Wed Jul 30 01:18:59 2008
+#
+CONFIG_SUPERH=y
+CONFIG_SUPERH32=y
+CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig"
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_BUG=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_ARCH_NO_VIRT_TO_BUS=y
+CONFIG_ARCH_SUPPORTS_AOUT=y
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+CONFIG_BSD_PROCESS_ACCT=y
+# CONFIG_BSD_PROCESS_ACCT_V3 is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+CONFIG_GROUP_SCHED=y
+CONFIG_FAIR_GROUP_SCHED=y
+# CONFIG_RT_GROUP_SCHED is not set
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
+# CONFIG_BLK_DEV_INITRD is not set
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_EMBEDDED=y
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+# CONFIG_KALLSYMS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
+# CONFIG_HAVE_IOREMAP_PROT is not set
+# CONFIG_HAVE_KPROBES is not set
+# CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_ARCH_TRACEHOOK is not set
+# CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+CONFIG_HAVE_CLK=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+CONFIG_CLASSIC_RCU=y
+
+#
+# System type
+#
+CONFIG_CPU_SH4=y
+CONFIG_CPU_SH4A=y
+CONFIG_CPU_SHX2=y
+# CONFIG_CPU_SUBTYPE_SH7619 is not set
+# CONFIG_CPU_SUBTYPE_SH7203 is not set
+# CONFIG_CPU_SUBTYPE_SH7206 is not set
+# CONFIG_CPU_SUBTYPE_SH7263 is not set
+# CONFIG_CPU_SUBTYPE_MXG is not set
+# CONFIG_CPU_SUBTYPE_SH7705 is not set
+# CONFIG_CPU_SUBTYPE_SH7706 is not set
+# CONFIG_CPU_SUBTYPE_SH7707 is not set
+# CONFIG_CPU_SUBTYPE_SH7708 is not set
+# CONFIG_CPU_SUBTYPE_SH7709 is not set
+# CONFIG_CPU_SUBTYPE_SH7710 is not set
+# CONFIG_CPU_SUBTYPE_SH7712 is not set
+# CONFIG_CPU_SUBTYPE_SH7720 is not set
+# CONFIG_CPU_SUBTYPE_SH7721 is not set
+# CONFIG_CPU_SUBTYPE_SH7750 is not set
+# CONFIG_CPU_SUBTYPE_SH7091 is not set
+# CONFIG_CPU_SUBTYPE_SH7750R is not set
+# CONFIG_CPU_SUBTYPE_SH7750S is not set
+# CONFIG_CPU_SUBTYPE_SH7751 is not set
+# CONFIG_CPU_SUBTYPE_SH7751R is not set
+# CONFIG_CPU_SUBTYPE_SH7760 is not set
+# CONFIG_CPU_SUBTYPE_SH4_202 is not set
+CONFIG_CPU_SUBTYPE_SH7723=y
+# CONFIG_CPU_SUBTYPE_SH7763 is not set
+# CONFIG_CPU_SUBTYPE_SH7770 is not set
+# CONFIG_CPU_SUBTYPE_SH7780 is not set
+# CONFIG_CPU_SUBTYPE_SH7785 is not set
+# CONFIG_CPU_SUBTYPE_SHX3 is not set
+# CONFIG_CPU_SUBTYPE_SH7343 is not set
+# CONFIG_CPU_SUBTYPE_SH7722 is not set
+# CONFIG_CPU_SUBTYPE_SH7366 is not set
+# CONFIG_CPU_SUBTYPE_SH5_101 is not set
+# CONFIG_CPU_SUBTYPE_SH5_103 is not set
+
+#
+# Memory management options
+#
+CONFIG_QUICKLIST=y
+CONFIG_MMU=y
+CONFIG_PAGE_OFFSET=0x80000000
+CONFIG_MEMORY_START=0x08000000
+CONFIG_MEMORY_SIZE=0x08000000
+CONFIG_29BIT=y
+# CONFIG_X2TLB is not set
+CONFIG_VSYSCALL=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_SPARSEMEM_ENABLE=y
+CONFIG_ARCH_SPARSEMEM_DEFAULT=y
+CONFIG_MAX_ACTIVE_REGIONS=1
+CONFIG_ARCH_POPULATES_NODE_MAP=y
+CONFIG_ARCH_SELECT_MEMORY_MODEL=y
+CONFIG_PAGE_SIZE_4KB=y
+# CONFIG_PAGE_SIZE_8KB is not set
+# CONFIG_PAGE_SIZE_16KB is not set
+# CONFIG_PAGE_SIZE_64KB is not set
+CONFIG_ENTRY_OFFSET=0x00001000
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_SPARSEMEM_STATIC=y
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_NR_QUICK=2
+
+#
+# Cache configuration
+#
+# CONFIG_SH_DIRECT_MAPPED is not set
+CONFIG_CACHE_WRITEBACK=y
+# CONFIG_CACHE_WRITETHROUGH is not set
+# CONFIG_CACHE_OFF is not set
+
+#
+# Processor features
+#
+CONFIG_CPU_LITTLE_ENDIAN=y
+# CONFIG_CPU_BIG_ENDIAN is not set
+CONFIG_SH_FPU=y
+# CONFIG_SH_STORE_QUEUES is not set
+CONFIG_CPU_HAS_INTEVT=y
+CONFIG_CPU_HAS_SR_RB=y
+CONFIG_CPU_HAS_PTEA=y
+CONFIG_CPU_HAS_FPU=y
+
+#
+# Board support
+#
+CONFIG_SH_AP325RXA=y
+
+#
+# Timer and clock configuration
+#
+CONFIG_SH_TMU=y
+CONFIG_SH_TIMER_IRQ=16
+CONFIG_SH_PCLK_FREQ=33333333
+CONFIG_TICK_ONESHOT=y
+# CONFIG_NO_HZ is not set
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+
+#
+# CPU Frequency scaling
+#
+# CONFIG_CPU_FREQ is not set
+
+#
+# DMA support
+#
+# CONFIG_SH_DMA is not set
+
+#
+# Companion Chips
+#
+
+#
+# Additional SuperH Device Drivers
+#
+# CONFIG_HEARTBEAT is not set
+# CONFIG_PUSH_SWITCH is not set
+
+#
+# Kernel features
+#
+# CONFIG_HZ_100 is not set
+CONFIG_HZ_250=y
+# CONFIG_HZ_300 is not set
+# CONFIG_HZ_1000 is not set
+CONFIG_HZ=250
+# CONFIG_SCHED_HRTICK is not set
+# CONFIG_KEXEC is not set
+# CONFIG_CRASH_DUMP is not set
+# CONFIG_PREEMPT_NONE is not set
+# CONFIG_PREEMPT_VOLUNTARY is not set
+CONFIG_PREEMPT=y
+# CONFIG_PREEMPT_RCU is not set
+CONFIG_GUSA=y
+
+#
+# Boot options
+#
+CONFIG_ZERO_PAGE_OFFSET=0x00001000
+CONFIG_BOOT_LINK_OFFSET=0x00800000
+CONFIG_CMDLINE_BOOL=y
+CONFIG_CMDLINE="console=tty1 console=ttySC5,38400 root=/dev/nfs ip=dhcp"
+
+#
+# Bus options
+#
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Executable file formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+CONFIG_IP_ADVANCED_ROUTER=y
+CONFIG_ASK_IP_FIB_HASH=y
+# CONFIG_IP_FIB_TRIE is not set
+CONFIG_IP_FIB_HASH=y
+# CONFIG_IP_MULTIPLE_TABLES is not set
+# CONFIG_IP_ROUTE_MULTIPATH is not set
+# CONFIG_IP_ROUTE_VERBOSE is not set
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+# CONFIG_IP_PNP_BOOTP is not set
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
+# CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+CONFIG_MTD_CONCAT=y
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_CFI_INTELEXT is not set
+CONFIG_MTD_CFI_AMDSTD=y
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+CONFIG_MTD_PHYSMAP=y
+CONFIG_MTD_PHYSMAP_START=0xffffffff
+CONFIG_MTD_PHYSMAP_LEN=0
+CONFIG_MTD_PHYSMAP_BANKWIDTH=0
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+# CONFIG_MTD_NAND is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+# CONFIG_BLK_DEV_LOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=4
+CONFIG_BLK_DEV_RAM_SIZE=4096
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+# CONFIG_SCSI_MULTI_LUN is not set
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+CONFIG_SCSI_LOWLEVEL=y
+# CONFIG_ISCSI_TCP is not set
+# CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_DH is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+# CONFIG_PHYLIB is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_AX88796 is not set
+# CONFIG_STNIC is not set
+# CONFIG_SMC91X is not set
+CONFIG_SMC911X=y
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_B44 is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
+# CONFIG_WAN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+CONFIG_VT_HW_CONSOLE_BINDING=y
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_SH_SCI=y
+CONFIG_SERIAL_SH_SCI_NR_UARTS=6
+CONFIG_SERIAL_SH_SCI_CONSOLE=y
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_IPMI_HANDLER is not set
+CONFIG_HW_RANDOM=y
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+# CONFIG_I2C is not set
+# CONFIG_SPI is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+# CONFIG_WATCHDOG is not set
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
+
+#
+# Multimedia devices
+#
+
+#
+# Multimedia core support
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
+# CONFIG_DAB is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+CONFIG_DUMMY_CONSOLE=y
+# CONFIG_SOUND is not set
+# CONFIG_HID_SUPPORT is not set
+# CONFIG_USB_SUPPORT is not set
+# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
+# CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
+# CONFIG_UIO is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+CONFIG_EXT2_FS_XATTR=y
+CONFIG_EXT2_FS_POSIX_ACL=y
+CONFIG_EXT2_FS_SECURITY=y
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+CONFIG_EXT3_FS_XATTR=y
+CONFIG_EXT3_FS_POSIX_ACL=y
+CONFIG_EXT3_FS_SECURITY=y
+# CONFIG_EXT4DEV_FS is not set
+CONFIG_JBD=y
+CONFIG_FS_MBCACHE=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+CONFIG_FS_POSIX_ACL=y
+# CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+# CONFIG_MSDOS_FS is not set
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_KCORE=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLBFS is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_JFFS2_FS is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+# CONFIG_NFS_V4 is not set
+CONFIG_ROOT_NFS=y
+CONFIG_NFSD=y
+CONFIG_NFSD_V3=y
+# CONFIG_NFSD_V3_ACL is not set
+# CONFIG_NFSD_V4 is not set
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_EXPORTFS=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+CONFIG_NLS_CODEPAGE_932=y
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+CONFIG_NLS_ISO8859_1=y
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+# CONFIG_ENABLE_MUST_CHECK is not set
+CONFIG_FRAME_WARN=1024
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_KERNEL is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_SAMPLES is not set
+# CONFIG_SH_STANDARD_BIOS is not set
+# CONFIG_EARLY_SCIF_CONSOLE is not set
+# CONFIG_SH_KGDB is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_MANAGER=y
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_MD4 is not set
+# CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_LZO is not set
+CONFIG_CRYPTO_HW=y
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+CONFIG_CRC_T10DIF=y
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
diff --git a/arch/sh/configs/dreamcast_defconfig b/arch/sh/configs/dreamcast_defconfig
index 57728788b753..3dc1cbd8a981 100644
--- a/arch/sh/configs/dreamcast_defconfig
+++ b/arch/sh/configs/dreamcast_defconfig
@@ -1,14 +1,17 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.23-rc7
-# Fri Sep 21 15:46:27 2007
+# Linux kernel version: 2.6.27-rc1
+# Mon Aug  4 16:49:13 2008
 #
 CONFIG_SUPERH=y
+CONFIG_SUPERH32=y
+CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig"
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
 CONFIG_GENERIC_BUG=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 CONFIG_GENERIC_IRQ_PROBE=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_TIME=y
@@ -37,12 +40,15 @@ CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_BSD_PROCESS_ACCT=y
 # CONFIG_BSD_PROCESS_ACCT_V3 is not set
 # CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
 # CONFIG_AUDIT is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+# CONFIG_GROUP_SCHED is not set
 CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
 # CONFIG_BLK_DEV_INITRD is not set
 CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 CONFIG_SYSCTL=y
@@ -55,21 +61,39 @@ CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
 CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
 CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
+CONFIG_PROFILING=y
+# CONFIG_MARKERS is not set
+# CONFIG_OPROFILE is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
+# CONFIG_HAVE_IOREMAP_PROT is not set
+# CONFIG_HAVE_KPROBES is not set
+# CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_ARCH_TRACEHOOK is not set
+# CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+CONFIG_HAVE_CLK=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
@@ -80,6 +104,7 @@ CONFIG_BLOCK=y
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -93,13 +118,17 @@ CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_CFQ is not set
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_CLASSIC_RCU=y
 
 #
 # System type
 #
 CONFIG_CPU_SH4=y
 # CONFIG_CPU_SUBTYPE_SH7619 is not set
+# CONFIG_CPU_SUBTYPE_SH7203 is not set
 # CONFIG_CPU_SUBTYPE_SH7206 is not set
+# CONFIG_CPU_SUBTYPE_SH7263 is not set
+# CONFIG_CPU_SUBTYPE_MXG is not set
 # CONFIG_CPU_SUBTYPE_SH7705 is not set
 # CONFIG_CPU_SUBTYPE_SH7706 is not set
 # CONFIG_CPU_SUBTYPE_SH7707 is not set
@@ -108,6 +137,7 @@ CONFIG_CPU_SH4=y
 # CONFIG_CPU_SUBTYPE_SH7710 is not set
 # CONFIG_CPU_SUBTYPE_SH7712 is not set
 # CONFIG_CPU_SUBTYPE_SH7720 is not set
+# CONFIG_CPU_SUBTYPE_SH7721 is not set
 # CONFIG_CPU_SUBTYPE_SH7750 is not set
 CONFIG_CPU_SUBTYPE_SH7091=y
 # CONFIG_CPU_SUBTYPE_SH7750R is not set
@@ -116,14 +146,17 @@ CONFIG_CPU_SUBTYPE_SH7091=y
 # CONFIG_CPU_SUBTYPE_SH7751R is not set
 # CONFIG_CPU_SUBTYPE_SH7760 is not set
 # CONFIG_CPU_SUBTYPE_SH4_202 is not set
-# CONFIG_CPU_SUBTYPE_ST40STB1 is not set
-# CONFIG_CPU_SUBTYPE_ST40GX1 is not set
+# CONFIG_CPU_SUBTYPE_SH7723 is not set
+# CONFIG_CPU_SUBTYPE_SH7763 is not set
 # CONFIG_CPU_SUBTYPE_SH7770 is not set
 # CONFIG_CPU_SUBTYPE_SH7780 is not set
 # CONFIG_CPU_SUBTYPE_SH7785 is not set
 # CONFIG_CPU_SUBTYPE_SHX3 is not set
 # CONFIG_CPU_SUBTYPE_SH7343 is not set
 # CONFIG_CPU_SUBTYPE_SH7722 is not set
+# CONFIG_CPU_SUBTYPE_SH7366 is not set
+# CONFIG_CPU_SUBTYPE_SH5_101 is not set
+# CONFIG_CPU_SUBTYPE_SH5_103 is not set
 
 #
 # Memory management options
@@ -133,6 +166,7 @@ CONFIG_MMU=y
 CONFIG_PAGE_OFFSET=0x80000000
 CONFIG_MEMORY_START=0x0c000000
 CONFIG_MEMORY_SIZE=0x01000000
+CONFIG_29BIT=y
 CONFIG_VSYSCALL=y
 CONFIG_ARCH_FLATMEM_ENABLE=y
 CONFIG_ARCH_SPARSEMEM_ENABLE=y
@@ -142,12 +176,15 @@ CONFIG_ARCH_POPULATES_NODE_MAP=y
 CONFIG_ARCH_SELECT_MEMORY_MODEL=y
 CONFIG_PAGE_SIZE_4KB=y
 # CONFIG_PAGE_SIZE_8KB is not set
+# CONFIG_PAGE_SIZE_16KB is not set
 # CONFIG_PAGE_SIZE_64KB is not set
+CONFIG_ENTRY_OFFSET=0x00001000
 CONFIG_HUGETLB_PAGE_SIZE_64K=y
 # CONFIG_HUGETLB_PAGE_SIZE_256K is not set
 # CONFIG_HUGETLB_PAGE_SIZE_1MB is not set
 # CONFIG_HUGETLB_PAGE_SIZE_4MB is not set
 # CONFIG_HUGETLB_PAGE_SIZE_64MB is not set
+# CONFIG_HUGETLB_PAGE_SIZE_512MB is not set
 CONFIG_SELECT_MEMORY_MODEL=y
 CONFIG_FLATMEM_MANUAL=y
 # CONFIG_DISCONTIGMEM_MANUAL is not set
@@ -155,6 +192,8 @@ CONFIG_FLATMEM_MANUAL=y
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 CONFIG_SPARSEMEM_STATIC=y
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_RESOURCES_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
@@ -194,6 +233,7 @@ CONFIG_SH_PCLK_FREQ=49876504
 # CONFIG_TICK_ONESHOT is not set
 # CONFIG_NO_HZ is not set
 # CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
 
 #
 # CPU Frequency scaling
@@ -204,7 +244,10 @@ CONFIG_CPU_FREQ_TABLE=y
 CONFIG_CPU_FREQ_STAT=y
 # CONFIG_CPU_FREQ_STAT_DETAILS is not set
 CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
+# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
 # CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
 CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
 CONFIG_CPU_FREQ_GOV_POWERSAVE=y
 CONFIG_CPU_FREQ_GOV_USERSPACE=y
@@ -239,12 +282,16 @@ CONFIG_HZ_250=y
 # CONFIG_HZ_300 is not set
 # CONFIG_HZ_1000 is not set
 CONFIG_HZ=250
+# CONFIG_SCHED_HRTICK is not set
 # CONFIG_KEXEC is not set
 # CONFIG_CRASH_DUMP is not set
+CONFIG_SECCOMP=y
 # CONFIG_PREEMPT_NONE is not set
 # CONFIG_PREEMPT_VOLUNTARY is not set
 CONFIG_PREEMPT=y
-CONFIG_PREEMPT_BKL=y
+# CONFIG_PREEMPT_RCU is not set
+CONFIG_GUSA=y
+# CONFIG_GUSA_RB is not set
 
 #
 # Boot options
@@ -263,10 +310,7 @@ CONFIG_PCI=y
 CONFIG_SH_PCIDMA_NONCOHERENT=y
 CONFIG_PCI_AUTO=y
 # CONFIG_ARCH_SUPPORTS_MSI is not set
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
+CONFIG_PCI_LEGACY=y
 # CONFIG_PCCARD is not set
 # CONFIG_HOTPLUG_PCI is not set
 
@@ -275,10 +319,6 @@ CONFIG_PCI_AUTO=y
 #
 CONFIG_BINFMT_ELF=y
 # CONFIG_BINFMT_MISC is not set
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -291,6 +331,7 @@ CONFIG_XFRM=y
 # CONFIG_XFRM_USER is not set
 # CONFIG_XFRM_SUB_POLICY is not set
 # CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
 # CONFIG_NET_KEY is not set
 CONFIG_INET=y
 # CONFIG_IP_MULTICAST is not set
@@ -309,6 +350,7 @@ CONFIG_IP_FIB_HASH=y
 CONFIG_INET_XFRM_MODE_TRANSPORT=y
 CONFIG_INET_XFRM_MODE_TUNNEL=y
 CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
 CONFIG_INET_DIAG=y
 CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
@@ -316,8 +358,6 @@ CONFIG_TCP_CONG_CUBIC=y
 CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
 # CONFIG_NETWORK_SECMARK is not set
 # CONFIG_NETFILTER is not set
 # CONFIG_IP_DCCP is not set
@@ -334,10 +374,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
 # CONFIG_NET_SCHED is not set
 
 #
@@ -345,6 +381,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 #
 # CONFIG_NET_PKTGEN is not set
 # CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
@@ -366,6 +403,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 #
 # Generic Driver Options
 #
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 # CONFIG_STANDALONE is not set
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_FW_LOADER is not set
@@ -374,6 +412,7 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_MTD is not set
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
+CONFIG_GDROM=y
 # CONFIG_BLK_CPQ_CISS_DA is not set
 # CONFIG_BLK_DEV_DAC960 is not set
 # CONFIG_BLK_DEV_UMEM is not set
@@ -384,11 +423,15 @@ CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_RAM is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_PHANTOM is not set
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_HP_ILO is not set
+CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
 #
@@ -400,44 +443,49 @@ CONFIG_MISC_DEVICES=y
 # CONFIG_SCSI_NETLINK is not set
 # CONFIG_ATA is not set
 # CONFIG_MD is not set
+# CONFIG_FUSION is not set
 
 #
-# Fusion MPT device support
+# IEEE 1394 (FireWire) support
 #
-# CONFIG_FUSION is not set
 
 #
-# IEEE 1394 (FireWire) support
+# Enable only one of the two stacks, unless you know what you are doing
 #
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
 # CONFIG_EQUALIZER is not set
 # CONFIG_TUN is not set
+# CONFIG_VETH is not set
 # CONFIG_ARCNET is not set
 # CONFIG_PHYLIB is not set
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
+# CONFIG_AX88796 is not set
 # CONFIG_STNIC is not set
 # CONFIG_HAPPYMEAL is not set
 # CONFIG_SUNGEM is not set
 # CONFIG_CASSINI is not set
 # CONFIG_NET_VENDOR_3COM is not set
 # CONFIG_SMC91X is not set
+# CONFIG_SMC911X is not set
 # CONFIG_NET_TULIP is not set
 # CONFIG_HP100 is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
 CONFIG_NET_PCI=y
 # CONFIG_PCNET32 is not set
 # CONFIG_AMD8111_ETH is not set
 # CONFIG_ADAPTEC_STARFIRE is not set
 # CONFIG_B44 is not set
 # CONFIG_FORCEDETH is not set
-# CONFIG_DGRS is not set
 # CONFIG_EEPRO100 is not set
 # CONFIG_E100 is not set
 # CONFIG_FEALNX is not set
@@ -449,6 +497,7 @@ CONFIG_8139TOO=y
 # CONFIG_8139TOO_TUNE_TWISTER is not set
 # CONFIG_8139TOO_8129 is not set
 # CONFIG_8139_OLD_RX_RESET is not set
+# CONFIG_R6040 is not set
 # CONFIG_SIS900 is not set
 # CONFIG_EPIC100 is not set
 # CONFIG_SUNDANCE is not set
@@ -464,12 +513,12 @@ CONFIG_8139TOO=y
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
 # CONFIG_WAN is not set
 # CONFIG_FDDI is not set
 # CONFIG_HIPPI is not set
 # CONFIG_PPP is not set
 # CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
 # CONFIG_NETCONSOLE is not set
 # CONFIG_NETPOLL is not set
 # CONFIG_NET_POLL_CONTROLLER is not set
@@ -491,7 +540,6 @@ CONFIG_INPUT_MOUSEDEV_PSAUX=y
 CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
 # CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
 # CONFIG_INPUT_EVDEV is not set
 # CONFIG_INPUT_EVBUG is not set
 
@@ -505,6 +553,8 @@ CONFIG_INPUT_KEYBOARD=y
 # CONFIG_KEYBOARD_XTKBD is not set
 # CONFIG_KEYBOARD_NEWTON is not set
 # CONFIG_KEYBOARD_STOWAWAY is not set
+CONFIG_KEYBOARD_MAPLE=y
+# CONFIG_KEYBOARD_SH_KEYSC is not set
 CONFIG_INPUT_MOUSE=y
 # CONFIG_MOUSE_PS2 is not set
 # CONFIG_MOUSE_SERIAL is not set
@@ -530,10 +580,13 @@ CONFIG_SERIO_LIBPS2=y
 # Character devices
 #
 CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
 # CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
 # CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_NOZOMI is not set
 
 #
 # Serial drivers
@@ -553,6 +606,19 @@ CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_IPMI_HANDLER is not set
+CONFIG_HW_RANDOM=y
+# CONFIG_R3964 is not set
+# CONFIG_APPLICOM is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_DEVPORT=y
+# CONFIG_I2C is not set
+# CONFIG_SPI is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
 CONFIG_WATCHDOG=y
 # CONFIG_WATCHDOG_NOWAYOUT is not set
 
@@ -568,45 +634,40 @@ CONFIG_SH_WDT=y
 #
 # CONFIG_PCIPCWATCHDOG is not set
 # CONFIG_WDTPCI is not set
-CONFIG_HW_RANDOM=y
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-# CONFIG_DRM is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-CONFIG_DEVPORT=y
-# CONFIG_I2C is not set
 
 #
-# SPI support
+# Sonics Silicon Backplane
 #
-# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
-# CONFIG_HWMON is not set
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
 
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
 
 #
 # Multimedia devices
 #
+
+#
+# Multimedia core support
+#
 # CONFIG_VIDEO_DEV is not set
 # CONFIG_DVB_CORE is not set
-# CONFIG_DAB is not set
+# CONFIG_VIDEO_MEDIA is not set
 
 #
-# Graphics support
+# Multimedia drivers
 #
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+# CONFIG_DAB is not set
 
 #
-# Display device support
+# Graphics support
 #
-# CONFIG_DISPLAY_SUPPORT is not set
+# CONFIG_DRM is not set
 # CONFIG_VGASTATE is not set
 CONFIG_VIDEO_OUTPUT_CONTROL=m
 CONFIG_FB=y
@@ -615,11 +676,12 @@ CONFIG_FIRMWARE_EDID=y
 CONFIG_FB_CFB_FILLRECT=y
 CONFIG_FB_CFB_COPYAREA=y
 CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
 # CONFIG_FB_SYS_FILLRECT is not set
 # CONFIG_FB_SYS_COPYAREA is not set
 # CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
 # CONFIG_FB_SYS_FOPS is not set
-CONFIG_FB_DEFERRED_IO=y
 # CONFIG_FB_SVGALIB is not set
 # CONFIG_FB_MACMODES is not set
 # CONFIG_FB_BACKLIGHT is not set
@@ -653,7 +715,15 @@ CONFIG_FB_PVR2=y
 # CONFIG_FB_TRIDENT is not set
 # CONFIG_FB_ARK is not set
 # CONFIG_FB_PM3 is not set
+# CONFIG_FB_CARMINE is not set
+# CONFIG_FB_SH_MOBILE_LCDC is not set
 # CONFIG_FB_VIRTUAL is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
 
 #
 # Console display driver support
@@ -680,49 +750,30 @@ CONFIG_LOGO=y
 # CONFIG_LOGO_SUPERH_MONO is not set
 # CONFIG_LOGO_SUPERH_VGA16 is not set
 CONFIG_LOGO_SUPERH_CLUT224=y
-
-#
-# Sound
-#
 # CONFIG_SOUND is not set
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
 # CONFIG_HID_DEBUG is not set
+# CONFIG_HIDRAW is not set
 CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
 CONFIG_USB_ARCH_HAS_EHCI=y
 # CONFIG_USB is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
 
 #
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
 #
-
-#
-# USB Gadget Support
-#
 # CONFIG_USB_GADGET is not set
 # CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
 # CONFIG_INFINIBAND is not set
 # CONFIG_RTC_CLASS is not set
-
-#
-# DMA Engine support
-#
-# CONFIG_DMA_ENGINE is not set
-
-#
-# DMA Clients
-#
-
-#
-# DMA Devices
-#
-
-#
-# Userspace I/O
-#
+# CONFIG_DMADEVICES is not set
 # CONFIG_UIO is not set
 
 #
@@ -735,14 +786,11 @@ CONFIG_USB_ARCH_HAS_EHCI=y
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
 # CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
+# CONFIG_DNOTIFY is not set
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
-# CONFIG_DNOTIFY is not set
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
 # CONFIG_FUSE_FS is not set
@@ -771,7 +819,6 @@ CONFIG_TMPFS=y
 # CONFIG_TMPFS_POSIX_ACL is not set
 CONFIG_HUGETLBFS=y
 CONFIG_HUGETLB_PAGE=y
-CONFIG_RAMFS=y
 # CONFIG_CONFIGFS_FS is not set
 
 #
@@ -786,14 +833,14 @@ CONFIG_RAMFS=y
 # CONFIG_EFS_FS is not set
 # CONFIG_CRAMFS is not set
 # CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
+CONFIG_NETWORK_FILESYSTEMS=y
 # CONFIG_NFS_FS is not set
 # CONFIG_NFSD is not set
 # CONFIG_SMB_FS is not set
@@ -807,35 +854,25 @@ CONFIG_RAMFS=y
 #
 # CONFIG_PARTITION_ADVANCED is not set
 CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
 # CONFIG_NLS is not set
-
-#
-# Distributed Lock Manager
-#
 # CONFIG_DLM is not set
 
 #
-# Profiling support
-#
-CONFIG_PROFILING=y
-# CONFIG_OPROFILE is not set
-
-#
 # Kernel hacking
 #
 CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 # CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
 # CONFIG_MAGIC_SYSRQ is not set
 # CONFIG_UNUSED_SYMBOLS is not set
 # CONFIG_DEBUG_FS is not set
 # CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_SAMPLES is not set
 # CONFIG_SH_STANDARD_BIOS is not set
 # CONFIG_EARLY_SCIF_CONSOLE is not set
 # CONFIG_SH_KGDB is not set
@@ -845,14 +882,95 @@ CONFIG_ENABLE_MUST_CHECK=y
 #
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
-# CONFIG_CRYPTO is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+# CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_MD4 is not set
+# CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_LZO is not set
+CONFIG_CRYPTO_HW=y
+# CONFIG_CRYPTO_DEV_HIFN_795X is not set
 
 #
 # Library routines
 #
 CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
 # CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
diff --git a/arch/sh/configs/hp6xx_defconfig b/arch/sh/configs/hp6xx_defconfig
index 756d38dc2f71..41e25b3a5b01 100644
--- a/arch/sh/configs/hp6xx_defconfig
+++ b/arch/sh/configs/hp6xx_defconfig
@@ -1,9 +1,11 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.23-rc4
-# Tue Sep 11 19:42:44 2007
+# Linux kernel version: 2.6.26
+# Wed Jul 30 01:24:57 2008
 #
 CONFIG_SUPERH=y
+CONFIG_SUPERH32=y
+CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig"
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
 CONFIG_GENERIC_BUG=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
@@ -20,6 +22,7 @@ CONFIG_LOCKDEP_SUPPORT=y
 # CONFIG_ARCH_HAS_ILOG2_U32 is not set
 # CONFIG_ARCH_HAS_ILOG2_U64 is not set
 CONFIG_ARCH_NO_VIRT_TO_BUS=y
+CONFIG_ARCH_SUPPORTS_AOUT=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
@@ -34,12 +37,15 @@ CONFIG_SWAP=y
 # CONFIG_SYSVIPC is not set
 CONFIG_BSD_PROCESS_ACCT=y
 # CONFIG_BSD_PROCESS_ACCT_V3 is not set
-# CONFIG_USER_NS is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+# CONFIG_GROUP_SCHED is not set
 CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
 # CONFIG_BLK_DEV_INITRD is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
@@ -52,6 +58,7 @@ CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
 CONFIG_ANON_INODES=y
@@ -64,6 +71,19 @@ CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
+# CONFIG_HAVE_IOREMAP_PROT is not set
+# CONFIG_HAVE_KPROBES is not set
+# CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_ARCH_TRACEHOOK is not set
+# CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+CONFIG_HAVE_CLK=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
@@ -73,6 +93,7 @@ CONFIG_BLOCK=y
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -86,13 +107,17 @@ CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_CFQ is not set
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_CLASSIC_RCU=y
 
 #
 # System type
 #
 CONFIG_CPU_SH3=y
 # CONFIG_CPU_SUBTYPE_SH7619 is not set
+# CONFIG_CPU_SUBTYPE_SH7203 is not set
 # CONFIG_CPU_SUBTYPE_SH7206 is not set
+# CONFIG_CPU_SUBTYPE_SH7263 is not set
+# CONFIG_CPU_SUBTYPE_MXG is not set
 # CONFIG_CPU_SUBTYPE_SH7705 is not set
 # CONFIG_CPU_SUBTYPE_SH7706 is not set
 # CONFIG_CPU_SUBTYPE_SH7707 is not set
@@ -101,6 +126,7 @@ CONFIG_CPU_SUBTYPE_SH7709=y
 # CONFIG_CPU_SUBTYPE_SH7710 is not set
 # CONFIG_CPU_SUBTYPE_SH7712 is not set
 # CONFIG_CPU_SUBTYPE_SH7720 is not set
+# CONFIG_CPU_SUBTYPE_SH7721 is not set
 # CONFIG_CPU_SUBTYPE_SH7750 is not set
 # CONFIG_CPU_SUBTYPE_SH7091 is not set
 # CONFIG_CPU_SUBTYPE_SH7750R is not set
@@ -109,14 +135,17 @@ CONFIG_CPU_SUBTYPE_SH7709=y
 # CONFIG_CPU_SUBTYPE_SH7751R is not set
 # CONFIG_CPU_SUBTYPE_SH7760 is not set
 # CONFIG_CPU_SUBTYPE_SH4_202 is not set
-# CONFIG_CPU_SUBTYPE_ST40STB1 is not set
-# CONFIG_CPU_SUBTYPE_ST40GX1 is not set
+# CONFIG_CPU_SUBTYPE_SH7723 is not set
+# CONFIG_CPU_SUBTYPE_SH7763 is not set
 # CONFIG_CPU_SUBTYPE_SH7770 is not set
 # CONFIG_CPU_SUBTYPE_SH7780 is not set
 # CONFIG_CPU_SUBTYPE_SH7785 is not set
 # CONFIG_CPU_SUBTYPE_SHX3 is not set
 # CONFIG_CPU_SUBTYPE_SH7343 is not set
 # CONFIG_CPU_SUBTYPE_SH7722 is not set
+# CONFIG_CPU_SUBTYPE_SH7366 is not set
+# CONFIG_CPU_SUBTYPE_SH5_101 is not set
+# CONFIG_CPU_SUBTYPE_SH5_103 is not set
 
 #
 # Memory management options
@@ -126,6 +155,7 @@ CONFIG_MMU=y
 CONFIG_PAGE_OFFSET=0x80000000
 CONFIG_MEMORY_START=0x0d000000
 CONFIG_MEMORY_SIZE=0x00400000
+CONFIG_29BIT=y
 CONFIG_VSYSCALL=y
 CONFIG_ARCH_FLATMEM_ENABLE=y
 CONFIG_ARCH_SPARSEMEM_ENABLE=y
@@ -135,7 +165,9 @@ CONFIG_ARCH_POPULATES_NODE_MAP=y
 CONFIG_ARCH_SELECT_MEMORY_MODEL=y
 CONFIG_PAGE_SIZE_4KB=y
 # CONFIG_PAGE_SIZE_8KB is not set
+# CONFIG_PAGE_SIZE_16KB is not set
 # CONFIG_PAGE_SIZE_64KB is not set
+CONFIG_ENTRY_OFFSET=0x00001000
 CONFIG_SELECT_MEMORY_MODEL=y
 CONFIG_FLATMEM_MANUAL=y
 # CONFIG_DISCONTIGMEM_MANUAL is not set
@@ -143,6 +175,8 @@ CONFIG_FLATMEM_MANUAL=y
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 CONFIG_SPARSEMEM_STATIC=y
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_RESOURCES_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
@@ -181,6 +215,7 @@ CONFIG_SH_PCLK_FREQ=22110000
 # CONFIG_TICK_ONESHOT is not set
 # CONFIG_NO_HZ is not set
 # CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
 
 #
 # CPU Frequency scaling
@@ -219,11 +254,14 @@ CONFIG_HZ_250=y
 # CONFIG_HZ_300 is not set
 # CONFIG_HZ_1000 is not set
 CONFIG_HZ=250
+# CONFIG_SCHED_HRTICK is not set
 # CONFIG_KEXEC is not set
 # CONFIG_CRASH_DUMP is not set
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
+CONFIG_GUSA=y
+# CONFIG_GUSA_RB is not set
 
 #
 # Boot options
@@ -237,10 +275,6 @@ CONFIG_BOOT_LINK_OFFSET=0x00800000
 #
 CONFIG_ISA=y
 # CONFIG_ARCH_SUPPORTS_MSI is not set
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
 CONFIG_PCCARD=y
 # CONFIG_PCMCIA_DEBUG is not set
 CONFIG_PCMCIA=y
@@ -263,11 +297,12 @@ CONFIG_BINFMT_ELF=y
 #
 # Power management options (EXPERIMENTAL)
 #
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
 CONFIG_PM=y
-CONFIG_PM_LEGACY=y
 # CONFIG_PM_DEBUG is not set
 CONFIG_PM_SLEEP=y
 CONFIG_SUSPEND=y
+CONFIG_SUSPEND_FREEZER=y
 CONFIG_APM_EMULATION=y
 
 #
@@ -282,9 +317,12 @@ CONFIG_APM_EMULATION=y
 #
 # Generic Driver Options
 #
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 # CONFIG_STANDALONE is not set
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_SYS_HYPERVISOR is not set
 # CONFIG_MTD is not set
 # CONFIG_PARPORT is not set
@@ -294,8 +332,11 @@ CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_LOOP is not set
 # CONFIG_BLK_DEV_RAM is not set
 # CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_EEPROM_93CX6 is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
 #
@@ -332,6 +373,7 @@ CONFIG_BLK_DEV_SD=y
 # CONFIG_SCSI_SPI_ATTRS is not set
 # CONFIG_SCSI_FC_ATTRS is not set
 # CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
 CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_AHA152X is not set
 # CONFIG_SCSI_AIC7XXX_OLD is not set
@@ -342,14 +384,17 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_GENERIC_NCR5380_MMIO is not set
 # CONFIG_SCSI_NCR53C406A is not set
 # CONFIG_SCSI_PAS16 is not set
-# CONFIG_SCSI_PSI240I is not set
 # CONFIG_SCSI_QLOGIC_FAS is not set
 # CONFIG_SCSI_SYM53C416 is not set
 # CONFIG_SCSI_T128 is not set
 # CONFIG_SCSI_DEBUG is not set
 # CONFIG_SCSI_LOWLEVEL_PCMCIA is not set
+# CONFIG_SCSI_DH is not set
 CONFIG_ATA=y
 # CONFIG_ATA_NONSTANDARD is not set
+CONFIG_SATA_PMP=y
+CONFIG_ATA_SFF=y
+# CONFIG_SATA_MV is not set
 # CONFIG_PATA_LEGACY is not set
 # CONFIG_PATA_PCMCIA is not set
 # CONFIG_PATA_QDI is not set
@@ -370,11 +415,9 @@ CONFIG_INPUT_POLLDEV=y
 #
 # CONFIG_INPUT_MOUSEDEV is not set
 # CONFIG_INPUT_JOYDEV is not set
-CONFIG_INPUT_TSDEV=y
-CONFIG_INPUT_TSDEV_SCREEN_X=240
-CONFIG_INPUT_TSDEV_SCREEN_Y=320
 CONFIG_INPUT_EVDEV=y
 # CONFIG_INPUT_EVBUG is not set
+# CONFIG_INPUT_APMPOWER is not set
 
 #
 # Input Device Drivers
@@ -387,6 +430,7 @@ CONFIG_INPUT_KEYBOARD=y
 # CONFIG_KEYBOARD_NEWTON is not set
 # CONFIG_KEYBOARD_STOWAWAY is not set
 CONFIG_KEYBOARD_HP6XX=y
+# CONFIG_KEYBOARD_SH_KEYSC is not set
 # CONFIG_INPUT_MOUSE is not set
 # CONFIG_INPUT_JOYSTICK is not set
 # CONFIG_INPUT_TABLET is not set
@@ -395,12 +439,15 @@ CONFIG_INPUT_TOUCHSCREEN=y
 # CONFIG_TOUCHSCREEN_GUNZE is not set
 # CONFIG_TOUCHSCREEN_ELO is not set
 # CONFIG_TOUCHSCREEN_MTOUCH is not set
+# CONFIG_TOUCHSCREEN_INEXIO is not set
 # CONFIG_TOUCHSCREEN_MK712 is not set
 CONFIG_TOUCHSCREEN_HP600=y
+# CONFIG_TOUCHSCREEN_HTCPEN is not set
 # CONFIG_TOUCHSCREEN_PENMOUNT is not set
 # CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
 # CONFIG_TOUCHSCREEN_TOUCHWIN is not set
 # CONFIG_TOUCHSCREEN_UCB1400 is not set
+# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
 # CONFIG_INPUT_MISC is not set
 
 #
@@ -417,9 +464,11 @@ CONFIG_SERIO=y
 # Character devices
 #
 CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
 # CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
 # CONFIG_SERIAL_NONSTANDARD is not set
 
 #
@@ -439,7 +488,6 @@ CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=64
 # CONFIG_IPMI_HANDLER is not set
-# CONFIG_WATCHDOG is not set
 CONFIG_HW_RANDOM=y
 # CONFIG_DTLK is not set
 # CONFIG_R3964 is not set
@@ -454,39 +502,45 @@ CONFIG_HW_RANDOM=y
 # CONFIG_TCG_TPM is not set
 CONFIG_DEVPORT=y
 # CONFIG_I2C is not set
-
-#
-# SPI support
-#
 # CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+# CONFIG_WATCHDOG is not set
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
 
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
 
 #
 # Multimedia devices
 #
+
+#
+# Multimedia core support
+#
 # CONFIG_VIDEO_DEV is not set
-# CONFIG_DAB is not set
+# CONFIG_VIDEO_MEDIA is not set
 
 #
-# Graphics support
+# Multimedia drivers
 #
-CONFIG_BACKLIGHT_LCD_SUPPORT=y
-CONFIG_LCD_CLASS_DEVICE=y
-CONFIG_BACKLIGHT_CLASS_DEVICE=y
-CONFIG_BACKLIGHT_HP680=y
+# CONFIG_DAB is not set
 
 #
-# Display device support
+# Graphics support
 #
-# CONFIG_DISPLAY_SUPPORT is not set
 # CONFIG_VGASTATE is not set
 CONFIG_VIDEO_OUTPUT_CONTROL=y
 CONFIG_FB=y
@@ -495,11 +549,12 @@ CONFIG_FIRMWARE_EDID=y
 CONFIG_FB_CFB_FILLRECT=y
 CONFIG_FB_CFB_COPYAREA=y
 CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
 # CONFIG_FB_SYS_FILLRECT is not set
 # CONFIG_FB_SYS_COPYAREA is not set
 # CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
 # CONFIG_FB_SYS_FOPS is not set
-CONFIG_FB_DEFERRED_IO=y
 # CONFIG_FB_SVGALIB is not set
 # CONFIG_FB_MACMODES is not set
 # CONFIG_FB_BACKLIGHT is not set
@@ -511,7 +566,20 @@ CONFIG_FB_DEFERRED_IO=y
 #
 # CONFIG_FB_S1D13XXX is not set
 CONFIG_FB_HIT=y
+CONFIG_FB_SH_MOBILE_LCDC=y
 # CONFIG_FB_VIRTUAL is not set
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+CONFIG_LCD_CLASS_DEVICE=y
+# CONFIG_LCD_ILI9320 is not set
+# CONFIG_LCD_PLATFORM is not set
+CONFIG_BACKLIGHT_CLASS_DEVICE=y
+# CONFIG_BACKLIGHT_CORGI is not set
+CONFIG_BACKLIGHT_HP680=y
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
 
 #
 # Console display driver support
@@ -533,15 +601,13 @@ CONFIG_FONT_PEARL_8x8=y
 # CONFIG_FONT_SUN12x22 is not set
 # CONFIG_FONT_10x18 is not set
 # CONFIG_LOGO is not set
-
-#
-# Sound
-#
 # CONFIG_SOUND is not set
 # CONFIG_HID_SUPPORT is not set
 # CONFIG_USB_SUPPORT is not set
 # CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
 CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
 CONFIG_RTC_HCTOSYS=y
@@ -564,9 +630,10 @@ CONFIG_RTC_INTF_DEV=y
 #
 # Platform RTC drivers
 #
+# CONFIG_RTC_DRV_DS1511 is not set
 # CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
 # CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
 # CONFIG_RTC_DRV_M48T86 is not set
 # CONFIG_RTC_DRV_M48T59 is not set
 # CONFIG_RTC_DRV_V3020 is not set
@@ -575,23 +642,7 @@ CONFIG_RTC_INTF_DEV=y
 # on-CPU RTC drivers
 #
 CONFIG_RTC_DRV_SH=y
-
-#
-# DMA Engine support
-#
-# CONFIG_DMA_ENGINE is not set
-
-#
-# DMA Clients
-#
-
-#
-# DMA Devices
-#
-
-#
-# Userspace I/O
-#
+# CONFIG_DMADEVICES is not set
 # CONFIG_UIO is not set
 
 #
@@ -606,13 +657,10 @@ CONFIG_EXT2_FS=y
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
 # CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
+CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
 # CONFIG_FUSE_FS is not set
@@ -643,7 +691,6 @@ CONFIG_SYSFS=y
 # CONFIG_TMPFS is not set
 # CONFIG_HUGETLBFS is not set
 # CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
 # CONFIG_CONFIGFS_FS is not set
 
 #
@@ -658,8 +705,11 @@ CONFIG_RAMFS=y
 # CONFIG_EFS_FS is not set
 # CONFIG_CRAMFS is not set
 # CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
 
@@ -668,10 +718,6 @@ CONFIG_RAMFS=y
 #
 # CONFIG_PARTITION_ADVANCED is not set
 CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
 CONFIG_NLS=y
 CONFIG_NLS_DEFAULT="iso8859-1"
 # CONFIG_NLS_CODEPAGE_437 is not set
@@ -714,22 +760,21 @@ CONFIG_NLS_CODEPAGE_850=y
 # CONFIG_NLS_UTF8 is not set
 
 #
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
 # Kernel hacking
 #
 CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 # CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
 # CONFIG_MAGIC_SYSRQ is not set
 # CONFIG_UNUSED_SYMBOLS is not set
 # CONFIG_DEBUG_FS is not set
 # CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_SAMPLES is not set
 # CONFIG_SH_STANDARD_BIOS is not set
 # CONFIG_EARLY_SCIF_CONSOLE is not set
 # CONFIG_SH_KGDB is not set
@@ -739,50 +784,95 @@ CONFIG_ENABLE_MUST_CHECK=y
 #
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
 CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
 CONFIG_CRYPTO_ALGAPI=y
 CONFIG_CRYPTO_BLKCIPHER=y
 CONFIG_CRYPTO_MANAGER=y
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=y
+# CONFIG_CRYPTO_LRW is not set
+CONFIG_CRYPTO_PCBC=y
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
 # CONFIG_CRYPTO_HMAC is not set
 # CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_NULL is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
 # CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
 # CONFIG_CRYPTO_SHA1 is not set
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
 # CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-CONFIG_CRYPTO_ECB=y
-CONFIG_CRYPTO_CBC=y
-CONFIG_CRYPTO_PCBC=y
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
 # CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
 # CONFIG_CRYPTO_CAST5 is not set
 # CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
 # CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
 # CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_LZO is not set
 # CONFIG_CRYPTO_HW is not set
 
 #
 # Library routines
 #
 CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
 # CONFIG_CRC_CCITT is not set
 CONFIG_CRC16=y
+CONFIG_CRC_T10DIF=y
 # CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
diff --git a/arch/sh/configs/landisk_defconfig b/arch/sh/configs/landisk_defconfig
index 38f934ab50c7..99cc39c5c6ca 100644
--- a/arch/sh/configs/landisk_defconfig
+++ b/arch/sh/configs/landisk_defconfig
@@ -1,44 +1,53 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.19
-# Thu Dec  7 17:13:04 2006
+# Linux kernel version: 2.6.26
+# Wed Jul 30 01:35:07 2008
 #
 CONFIG_SUPERH=y
+CONFIG_SUPERH32=y
+CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig"
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_BUG=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_IRQ_PROBE=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
-# CONFIG_GENERIC_TIME is not set
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_SYS_SUPPORTS_PCI=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_ARCH_NO_VIRT_TO_BUS=y
+CONFIG_ARCH_SUPPORTS_AOUT=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
-# Code maturity level options
+# General setup
 #
 CONFIG_EXPERIMENTAL=y
 CONFIG_BROKEN_ON_SMP=y
 CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
 CONFIG_LOCALVERSION=""
 CONFIG_LOCALVERSION_AUTO=y
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-# CONFIG_IPC_NS is not set
+CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_POSIX_MQUEUE is not set
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
-# CONFIG_UTS_NS is not set
 # CONFIG_AUDIT is not set
 # CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+# CONFIG_GROUP_SCHED is not set
 CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_RELAY is not set
-CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_NAMESPACES is not set
+# CONFIG_BLK_DEV_INITRD is not set
 CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
@@ -50,34 +59,48 @@ CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
-CONFIG_SLAB=y
 CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
+# CONFIG_HAVE_IOREMAP_PROT is not set
+# CONFIG_HAVE_KPROBES is not set
+# CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_ARCH_TRACEHOOK is not set
+# CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+CONFIG_HAVE_CLK=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
-# CONFIG_SLOB is not set
-
-#
-# Loadable module support
-#
 CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
 CONFIG_MODULE_FORCE_UNLOAD=y
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_KMOD=y
-
-#
-# Block layer
-#
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -91,67 +114,26 @@ CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_CFQ is not set
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_CLASSIC_RCU=y
 
 #
 # System type
 #
-# CONFIG_SH_SOLUTION_ENGINE is not set
-# CONFIG_SH_7751_SOLUTION_ENGINE is not set
-# CONFIG_SH_7300_SOLUTION_ENGINE is not set
-# CONFIG_SH_7343_SOLUTION_ENGINE is not set
-# CONFIG_SH_73180_SOLUTION_ENGINE is not set
-# CONFIG_SH_7751_SYSTEMH is not set
-# CONFIG_SH_HP6XX is not set
-# CONFIG_SH_EC3104 is not set
-# CONFIG_SH_SATURN is not set
-# CONFIG_SH_DREAMCAST is not set
-# CONFIG_SH_BIGSUR is not set
-# CONFIG_SH_MPC1211 is not set
-# CONFIG_SH_SH03 is not set
-# CONFIG_SH_SECUREEDGE5410 is not set
-# CONFIG_SH_HS7751RVOIP is not set
-# CONFIG_SH_7710VOIPGW is not set
-# CONFIG_SH_RTS7751R2D is not set
-# CONFIG_SH_R7780RP is not set
-# CONFIG_SH_EDOSK7705 is not set
-# CONFIG_SH_SH4202_MICRODEV is not set
-CONFIG_SH_LANDISK=y
-# CONFIG_SH_TITAN is not set
-# CONFIG_SH_SHMIN is not set
-# CONFIG_SH_7206_SOLUTION_ENGINE is not set
-# CONFIG_SH_7619_SOLUTION_ENGINE is not set
-# CONFIG_SH_UNKNOWN is not set
-
-#
-# Processor selection
-#
 CONFIG_CPU_SH4=y
-
-#
-# SH-2 Processor Support
-#
-# CONFIG_CPU_SUBTYPE_SH7604 is not set
 # CONFIG_CPU_SUBTYPE_SH7619 is not set
-
-#
-# SH-2A Processor Support
-#
+# CONFIG_CPU_SUBTYPE_SH7203 is not set
 # CONFIG_CPU_SUBTYPE_SH7206 is not set
-
-#
-# SH-3 Processor Support
-#
-# CONFIG_CPU_SUBTYPE_SH7300 is not set
+# CONFIG_CPU_SUBTYPE_SH7263 is not set
+# CONFIG_CPU_SUBTYPE_MXG is not set
 # CONFIG_CPU_SUBTYPE_SH7705 is not set
 # CONFIG_CPU_SUBTYPE_SH7706 is not set
 # CONFIG_CPU_SUBTYPE_SH7707 is not set
 # CONFIG_CPU_SUBTYPE_SH7708 is not set
 # CONFIG_CPU_SUBTYPE_SH7709 is not set
 # CONFIG_CPU_SUBTYPE_SH7710 is not set
-
-#
-# SH-4 Processor Support
-#
+# CONFIG_CPU_SUBTYPE_SH7712 is not set
+# CONFIG_CPU_SUBTYPE_SH7720 is not set
+# CONFIG_CPU_SUBTYPE_SH7721 is not set
 # CONFIG_CPU_SUBTYPE_SH7750 is not set
 # CONFIG_CPU_SUBTYPE_SH7091 is not set
 # CONFIG_CPU_SUBTYPE_SH7750R is not set
@@ -160,53 +142,60 @@ CONFIG_CPU_SH4=y
 CONFIG_CPU_SUBTYPE_SH7751R=y
 # CONFIG_CPU_SUBTYPE_SH7760 is not set
 # CONFIG_CPU_SUBTYPE_SH4_202 is not set
-
-#
-# ST40 Processor Support
-#
-# CONFIG_CPU_SUBTYPE_ST40STB1 is not set
-# CONFIG_CPU_SUBTYPE_ST40GX1 is not set
-
-#
-# SH-4A Processor Support
-#
+# CONFIG_CPU_SUBTYPE_SH7723 is not set
+# CONFIG_CPU_SUBTYPE_SH7763 is not set
 # CONFIG_CPU_SUBTYPE_SH7770 is not set
 # CONFIG_CPU_SUBTYPE_SH7780 is not set
 # CONFIG_CPU_SUBTYPE_SH7785 is not set
-
-#
-# SH4AL-DSP Processor Support
-#
-# CONFIG_CPU_SUBTYPE_SH73180 is not set
+# CONFIG_CPU_SUBTYPE_SHX3 is not set
 # CONFIG_CPU_SUBTYPE_SH7343 is not set
+# CONFIG_CPU_SUBTYPE_SH7722 is not set
+# CONFIG_CPU_SUBTYPE_SH7366 is not set
+# CONFIG_CPU_SUBTYPE_SH5_101 is not set
+# CONFIG_CPU_SUBTYPE_SH5_103 is not set
 
 #
 # Memory management options
 #
+CONFIG_QUICKLIST=y
 CONFIG_MMU=y
 CONFIG_PAGE_OFFSET=0x80000000
 CONFIG_MEMORY_START=0x0c000000
 CONFIG_MEMORY_SIZE=0x04000000
+CONFIG_29BIT=y
 CONFIG_VSYSCALL=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_SPARSEMEM_ENABLE=y
+CONFIG_ARCH_SPARSEMEM_DEFAULT=y
+CONFIG_MAX_ACTIVE_REGIONS=1
+CONFIG_ARCH_POPULATES_NODE_MAP=y
+CONFIG_ARCH_SELECT_MEMORY_MODEL=y
 CONFIG_PAGE_SIZE_4KB=y
 # CONFIG_PAGE_SIZE_8KB is not set
+# CONFIG_PAGE_SIZE_16KB is not set
 # CONFIG_PAGE_SIZE_64KB is not set
+CONFIG_ENTRY_OFFSET=0x00001000
 CONFIG_SELECT_MEMORY_MODEL=y
 CONFIG_FLATMEM_MANUAL=y
 # CONFIG_DISCONTIGMEM_MANUAL is not set
 # CONFIG_SPARSEMEM_MANUAL is not set
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPARSEMEM_STATIC=y
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_NR_QUICK=2
 
 #
 # Cache configuration
 #
 # CONFIG_SH_DIRECT_MAPPED is not set
-# CONFIG_SH_WRITETHROUGH is not set
-# CONFIG_SH_OCRAM is not set
+CONFIG_CACHE_WRITEBACK=y
+# CONFIG_CACHE_WRITETHROUGH is not set
+# CONFIG_CACHE_OFF is not set
 
 #
 # Processor features
@@ -214,19 +203,32 @@ CONFIG_SPLIT_PTLOCK_CPUS=4
 CONFIG_CPU_LITTLE_ENDIAN=y
 # CONFIG_CPU_BIG_ENDIAN is not set
 CONFIG_SH_FPU=y
-# CONFIG_SH_DSP is not set
 # CONFIG_SH_STORE_QUEUES is not set
 CONFIG_CPU_HAS_INTEVT=y
-CONFIG_CPU_HAS_INTC_IRQ=y
 CONFIG_CPU_HAS_SR_RB=y
 CONFIG_CPU_HAS_PTEA=y
+CONFIG_CPU_HAS_FPU=y
 
 #
-# Timer support
+# Board support
+#
+# CONFIG_SH_7751_SYSTEMH is not set
+# CONFIG_SH_SECUREEDGE5410 is not set
+# CONFIG_SH_RTS7751R2D is not set
+CONFIG_SH_LANDISK=y
+# CONFIG_SH_TITAN is not set
+# CONFIG_SH_LBOX_RE2 is not set
+
+#
+# Timer and clock configuration
 #
 CONFIG_SH_TMU=y
 CONFIG_SH_TIMER_IRQ=16
 CONFIG_SH_PCLK_FREQ=33333333
+# CONFIG_TICK_ONESHOT is not set
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
 
 #
 # CPU Frequency scaling
@@ -241,12 +243,11 @@ CONFIG_SH_PCLK_FREQ=33333333
 #
 # Companion Chips
 #
-# CONFIG_HD6446X_SERIES is not set
-CONFIG_HEARTBEAT=y
 
 #
 # Additional SuperH Device Drivers
 #
+CONFIG_HEARTBEAT=y
 # CONFIG_PUSH_SWITCH is not set
 
 #
@@ -254,13 +255,17 @@ CONFIG_HEARTBEAT=y
 #
 # CONFIG_HZ_100 is not set
 CONFIG_HZ_250=y
+# CONFIG_HZ_300 is not set
 # CONFIG_HZ_1000 is not set
 CONFIG_HZ=250
+# CONFIG_SCHED_HRTICK is not set
 CONFIG_KEXEC=y
-# CONFIG_SMP is not set
+# CONFIG_CRASH_DUMP is not set
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
+CONFIG_GUSA=y
+# CONFIG_GUSA_RB is not set
 
 #
 # Boot options
@@ -273,16 +278,12 @@ CONFIG_BOOT_LINK_OFFSET=0x00800000
 #
 # Bus options
 #
-CONFIG_ISA=y
 CONFIG_PCI=y
 CONFIG_SH_PCIDMA_NONCOHERENT=y
 CONFIG_PCI_AUTO=y
 CONFIG_PCI_AUTO_UPDATE_RESOURCES=y
-# CONFIG_PCI_MULTITHREAD_PROBE is not set
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+CONFIG_PCI_LEGACY=y
 CONFIG_PCCARD=y
 # CONFIG_PCMCIA_DEBUG is not set
 CONFIG_PCMCIA=y
@@ -301,29 +302,16 @@ CONFIG_YENTA_ENE_TUNE=y
 CONFIG_YENTA_TOSHIBA=y
 # CONFIG_PD6729 is not set
 # CONFIG_I82092 is not set
-# CONFIG_I82365 is not set
-# CONFIG_TCIC is not set
-CONFIG_PCMCIA_PROBE=y
 CONFIG_PCCARD_NONSTATIC=y
-
-#
-# PCI Hotplug Support
-#
 # CONFIG_HOTPLUG_PCI is not set
 
 #
 # Executable file formats
 #
 CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_FLAT is not set
 # CONFIG_BINFMT_MISC is not set
 
 #
-# Power management options (EXPERIMENTAL)
-#
-# CONFIG_PM is not set
-
-#
 # Networking
 #
 CONFIG_NET=y
@@ -331,13 +319,14 @@ CONFIG_NET=y
 #
 # Networking options
 #
-# CONFIG_NETDEBUG is not set
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
 CONFIG_XFRM=y
 # CONFIG_XFRM_USER is not set
 # CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
 # CONFIG_NET_KEY is not set
 CONFIG_INET=y
 # CONFIG_IP_MULTICAST is not set
@@ -364,49 +353,36 @@ CONFIG_IP_PNP=y
 CONFIG_INET_XFRM_MODE_TRANSPORT=y
 CONFIG_INET_XFRM_MODE_TUNNEL=y
 CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
 CONFIG_INET_DIAG=y
 CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
 CONFIG_TCP_CONG_CUBIC=y
 CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_TCP_MD5SIG is not set
-
-#
-# IP: Virtual Server Configuration
-#
 # CONFIG_IP_VS is not set
 # CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
 # CONFIG_NETWORK_SECMARK is not set
 CONFIG_NETFILTER=y
 # CONFIG_NETFILTER_DEBUG is not set
+CONFIG_NETFILTER_ADVANCED=y
 
 #
 # Core Netfilter Configuration
 #
-# CONFIG_NETFILTER_NETLINK is not set
-# CONFIG_NF_CONNTRACK_ENABLED is not set
+# CONFIG_NETFILTER_NETLINK_QUEUE is not set
+# CONFIG_NETFILTER_NETLINK_LOG is not set
+# CONFIG_NF_CONNTRACK is not set
 # CONFIG_NETFILTER_XTABLES is not set
 
 #
 # IP: Netfilter Configuration
 #
 CONFIG_IP_NF_QUEUE=m
-
-#
-# DCCP Configuration (EXPERIMENTAL)
-#
+# CONFIG_IP_NF_IPTABLES is not set
+# CONFIG_IP_NF_ARPTABLES is not set
 # CONFIG_IP_DCCP is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
 # CONFIG_IP_SCTP is not set
-
-#
-# TIPC Configuration (EXPERIMENTAL)
-#
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
@@ -421,10 +397,6 @@ CONFIG_ATALK=m
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
 # CONFIG_NET_SCHED is not set
 
 #
@@ -432,9 +404,20 @@ CONFIG_ATALK=m
 #
 # CONFIG_NET_PKTGEN is not set
 # CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
 # CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
 
 #
 # Device Drivers
@@ -443,35 +426,17 @@ CONFIG_ATALK=m
 #
 # Generic Driver Options
 #
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_SYS_HYPERVISOR is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
 # CONFIG_CONNECTOR is not set
-
-#
-# Memory Technology Devices (MTD)
-#
 # CONFIG_MTD is not set
-
-#
-# Parallel port support
-#
 # CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-# CONFIG_PNP is not set
-
-#
-# Block devices
-#
-# CONFIG_BLK_CPQ_DA is not set
+CONFIG_BLK_DEV=y
 # CONFIG_BLK_CPQ_CISS_DA is not set
 # CONFIG_BLK_DEV_DAC960 is not set
 # CONFIG_BLK_DEV_UMEM is not set
@@ -484,63 +449,66 @@ CONFIG_BLK_DEV_LOOP=y
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
-# CONFIG_BLK_DEV_INITRD is not set
+# CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
-
-#
-# Misc devices
-#
+# CONFIG_BLK_DEV_HD is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_PHANTOM is not set
+# CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
+# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_HP_ILO is not set
+CONFIG_HAVE_IDE=y
 CONFIG_IDE=y
 CONFIG_IDE_MAX_HWIFS=4
 CONFIG_BLK_DEV_IDE=y
 
 #
-# Please see Documentation/ide.txt for help/info on IDE drives
+# Please see Documentation/ide/ide.txt for help/info on IDE drives
 #
+CONFIG_IDE_ATAPI=y
 # CONFIG_BLK_DEV_IDE_SATA is not set
 CONFIG_BLK_DEV_IDEDISK=y
 # CONFIG_IDEDISK_MULTI_MODE is not set
 # CONFIG_BLK_DEV_IDECS is not set
+# CONFIG_BLK_DEV_DELKIN is not set
 CONFIG_BLK_DEV_IDECD=y
+CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y
 # CONFIG_BLK_DEV_IDETAPE is not set
 # CONFIG_BLK_DEV_IDEFLOPPY is not set
 CONFIG_BLK_DEV_IDESCSI=y
 # CONFIG_IDE_TASK_IOCTL is not set
+CONFIG_IDE_PROC_FS=y
 
 #
 # IDE chipset support/bugfixes
 #
-CONFIG_IDE_GENERIC=y
+# CONFIG_BLK_DEV_PLATFORM is not set
+CONFIG_BLK_DEV_IDEDMA_SFF=y
+
+#
+# PCI IDE chipsets support
+#
 CONFIG_BLK_DEV_IDEPCI=y
-CONFIG_IDEPCI_SHARE_IRQ=y
+CONFIG_IDEPCI_PCIBUS_ORDER=y
 CONFIG_BLK_DEV_OFFBOARD=y
 CONFIG_BLK_DEV_GENERIC=y
 # CONFIG_BLK_DEV_OPTI621 is not set
 CONFIG_BLK_DEV_IDEDMA_PCI=y
-# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
-CONFIG_IDEDMA_PCI_AUTO=y
-CONFIG_IDEDMA_ONLYDISK=y
 CONFIG_BLK_DEV_AEC62XX=y
 # CONFIG_BLK_DEV_ALI15X3 is not set
 # CONFIG_BLK_DEV_AMD74XX is not set
 # CONFIG_BLK_DEV_CMD64X is not set
 # CONFIG_BLK_DEV_TRIFLEX is not set
-# CONFIG_BLK_DEV_CY82C693 is not set
 # CONFIG_BLK_DEV_CS5520 is not set
 # CONFIG_BLK_DEV_CS5530 is not set
-# CONFIG_BLK_DEV_HPT34X is not set
 # CONFIG_BLK_DEV_HPT366 is not set
 # CONFIG_BLK_DEV_JMICRON is not set
 # CONFIG_BLK_DEV_SC1200 is not set
 # CONFIG_BLK_DEV_PIIX is not set
+# CONFIG_BLK_DEV_IT8213 is not set
 # CONFIG_BLK_DEV_IT821X is not set
 # CONFIG_BLK_DEV_NS87415 is not set
 # CONFIG_BLK_DEV_PDC202XX_OLD is not set
@@ -550,18 +518,15 @@ CONFIG_BLK_DEV_AEC62XX=y
 # CONFIG_BLK_DEV_SLC90E66 is not set
 # CONFIG_BLK_DEV_TRM290 is not set
 # CONFIG_BLK_DEV_VIA82CXXX is not set
-# CONFIG_IDE_ARM is not set
-# CONFIG_IDE_CHIPSETS is not set
+# CONFIG_BLK_DEV_TC86C001 is not set
 CONFIG_BLK_DEV_IDEDMA=y
-# CONFIG_IDEDMA_IVB is not set
-CONFIG_IDEDMA_AUTO=y
-# CONFIG_BLK_DEV_HD is not set
 
 #
 # SCSI device support
 #
 # CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
 # CONFIG_SCSI_TGT is not set
 # CONFIG_SCSI_NETLINK is not set
 CONFIG_SCSI_PROC_FS=y
@@ -583,6 +548,7 @@ CONFIG_SCSI_MULTI_LUN=y
 # CONFIG_SCSI_CONSTANTS is not set
 # CONFIG_SCSI_LOGGING is not set
 # CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
 
 #
 # SCSI Transports
@@ -590,77 +556,43 @@ CONFIG_SCSI_MULTI_LUN=y
 # CONFIG_SCSI_SPI_ATTRS is not set
 # CONFIG_SCSI_FC_ATTRS is not set
 # CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_ATTRS is not set
 # CONFIG_SCSI_SAS_LIBSAS is not set
-
-#
-# SCSI low-level drivers
-#
+# CONFIG_SCSI_SRP_ATTRS is not set
+CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_ISCSI_TCP is not set
 # CONFIG_BLK_DEV_3W_XXXX_RAID is not set
 # CONFIG_SCSI_3W_9XXX is not set
 # CONFIG_SCSI_ACARD is not set
-# CONFIG_SCSI_AHA152X is not set
 # CONFIG_SCSI_AACRAID is not set
 # CONFIG_SCSI_AIC7XXX is not set
 # CONFIG_SCSI_AIC7XXX_OLD is not set
 # CONFIG_SCSI_AIC79XX is not set
 # CONFIG_SCSI_AIC94XX is not set
-# CONFIG_SCSI_DPT_I2O is not set
-# CONFIG_SCSI_IN2000 is not set
 # CONFIG_SCSI_ARCMSR is not set
 # CONFIG_MEGARAID_NEWGEN is not set
 # CONFIG_MEGARAID_LEGACY is not set
 # CONFIG_MEGARAID_SAS is not set
 # CONFIG_SCSI_HPTIOP is not set
 # CONFIG_SCSI_DMX3191D is not set
-# CONFIG_SCSI_DTC3280 is not set
 # CONFIG_SCSI_FUTURE_DOMAIN is not set
-# CONFIG_SCSI_GENERIC_NCR5380 is not set
-# CONFIG_SCSI_GENERIC_NCR5380_MMIO is not set
 # CONFIG_SCSI_IPS is not set
 # CONFIG_SCSI_INITIO is not set
 # CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_NCR53C406A is not set
+# CONFIG_SCSI_MVSAS is not set
 # CONFIG_SCSI_STEX is not set
 # CONFIG_SCSI_SYM53C8XX_2 is not set
-# CONFIG_SCSI_PAS16 is not set
-# CONFIG_SCSI_PSI240I is not set
-# CONFIG_SCSI_QLOGIC_FAS is not set
 # CONFIG_SCSI_QLOGIC_1280 is not set
 # CONFIG_SCSI_QLA_FC is not set
 # CONFIG_SCSI_QLA_ISCSI is not set
 # CONFIG_SCSI_LPFC is not set
-# CONFIG_SCSI_SYM53C416 is not set
 # CONFIG_SCSI_DC395x is not set
 # CONFIG_SCSI_DC390T is not set
-# CONFIG_SCSI_T128 is not set
 # CONFIG_SCSI_NSP32 is not set
 # CONFIG_SCSI_DEBUG is not set
 # CONFIG_SCSI_SRP is not set
-
-#
-# PCMCIA SCSI adapter support
-#
-# CONFIG_PCMCIA_AHA152X is not set
-# CONFIG_PCMCIA_FDOMAIN is not set
-# CONFIG_PCMCIA_NINJA_SCSI is not set
-# CONFIG_PCMCIA_QLOGIC is not set
-# CONFIG_PCMCIA_SYM53C500 is not set
-
-#
-# Serial ATA (prod) and Parallel ATA (experimental) drivers
-#
+# CONFIG_SCSI_LOWLEVEL_PCMCIA is not set
+# CONFIG_SCSI_DH is not set
 # CONFIG_ATA is not set
-
-#
-# Old CD-ROM drivers (not SCSI, not IDE)
-#
-# CONFIG_CD_NO_IDESCSI is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
 CONFIG_MD=y
 CONFIG_BLK_DEV_MD=m
 CONFIG_MD_LINEAR=m
@@ -671,76 +603,49 @@ CONFIG_MD_RAID1=m
 # CONFIG_MD_MULTIPATH is not set
 # CONFIG_MD_FAULTY is not set
 # CONFIG_BLK_DEV_DM is not set
-
-#
-# Fusion MPT device support
-#
 # CONFIG_FUSION is not set
-# CONFIG_FUSION_SPI is not set
-# CONFIG_FUSION_FC is not set
-# CONFIG_FUSION_SAS is not set
 
 #
 # IEEE 1394 (FireWire) support
 #
-# CONFIG_IEEE1394 is not set
 
 #
-# I2O device support
+# Enable only one of the two stacks, unless you know what you are doing
 #
+# CONFIG_FIREWIRE is not set
+# CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
-
-#
-# Network device support
-#
 CONFIG_NETDEVICES=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
 # CONFIG_EQUALIZER is not set
 CONFIG_TUN=m
-
-#
-# ARCnet devices
-#
+# CONFIG_VETH is not set
 # CONFIG_ARCNET is not set
-
-#
-# PHY device support
-#
 # CONFIG_PHYLIB is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
+# CONFIG_AX88796 is not set
 # CONFIG_STNIC is not set
 # CONFIG_HAPPYMEAL is not set
 # CONFIG_SUNGEM is not set
 # CONFIG_CASSINI is not set
 # CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_NET_VENDOR_SMC is not set
 # CONFIG_SMC91X is not set
-# CONFIG_NET_VENDOR_RACAL is not set
-
-#
-# Tulip family network device support
-#
+# CONFIG_SMC911X is not set
 # CONFIG_NET_TULIP is not set
-# CONFIG_AT1700 is not set
-# CONFIG_DEPCA is not set
 # CONFIG_HP100 is not set
-# CONFIG_NET_ISA is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
 CONFIG_NET_PCI=y
 # CONFIG_PCNET32 is not set
 # CONFIG_AMD8111_ETH is not set
 # CONFIG_ADAPTEC_STARFIRE is not set
-# CONFIG_AC3200 is not set
-# CONFIG_APRICOT is not set
 # CONFIG_B44 is not set
 # CONFIG_FORCEDETH is not set
-# CONFIG_CS89x0 is not set
-# CONFIG_DGRS is not set
 # CONFIG_EEPRO100 is not set
 # CONFIG_E100 is not set
 # CONFIG_FEALNX is not set
@@ -748,18 +653,20 @@ CONFIG_NET_PCI=y
 # CONFIG_NE2K_PCI is not set
 CONFIG_8139CP=y
 # CONFIG_8139TOO is not set
+# CONFIG_R6040 is not set
 # CONFIG_SIS900 is not set
 # CONFIG_EPIC100 is not set
 # CONFIG_SUNDANCE is not set
 # CONFIG_TLAN is not set
 # CONFIG_VIA_RHINE is not set
-
-#
-# Ethernet (1000 Mbit)
-#
+# CONFIG_SC92031 is not set
+CONFIG_NETDEV_1000=y
 # CONFIG_ACENIC is not set
 # CONFIG_DL2K is not set
 # CONFIG_E1000 is not set
+# CONFIG_E1000E is not set
+# CONFIG_IP1000 is not set
+# CONFIG_IGB is not set
 # CONFIG_NS83820 is not set
 # CONFIG_HAMACHI is not set
 # CONFIG_YELLOWFIN is not set
@@ -767,58 +674,53 @@ CONFIG_8139CP=y
 # CONFIG_SIS190 is not set
 # CONFIG_SKGE is not set
 # CONFIG_SKY2 is not set
-# CONFIG_SK98LIN is not set
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
 # CONFIG_QLA3XXX is not set
-
-#
-# Ethernet (10000 Mbit)
-#
+# CONFIG_ATL1 is not set
+# CONFIG_ATL1E is not set
+CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
+# CONFIG_CHELSIO_T3 is not set
+# CONFIG_IXGBE is not set
 # CONFIG_IXGB is not set
 # CONFIG_S2IO is not set
 # CONFIG_MYRI10GE is not set
 # CONFIG_NETXEN_NIC is not set
-
-#
-# Token Ring devices
-#
+# CONFIG_NIU is not set
+# CONFIG_MLX4_CORE is not set
+# CONFIG_TEHUTI is not set
+# CONFIG_BNX2X is not set
+# CONFIG_SFC is not set
 # CONFIG_TR is not set
 
 #
-# Wireless LAN (non-hamradio)
+# Wireless LAN
 #
-# CONFIG_NET_RADIO is not set
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
 
 #
-# PCMCIA network device support
+# USB Network Adapters
 #
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+CONFIG_USB_PEGASUS=m
+CONFIG_USB_RTL8150=m
+# CONFIG_USB_USBNET is not set
 # CONFIG_NET_PCMCIA is not set
-
-#
-# Wan interfaces
-#
 # CONFIG_WAN is not set
 # CONFIG_FDDI is not set
 # CONFIG_HIPPI is not set
 # CONFIG_PPP is not set
 # CONFIG_SLIP is not set
 # CONFIG_NET_FC is not set
-# CONFIG_SHAPER is not set
 # CONFIG_NETCONSOLE is not set
 # CONFIG_NETPOLL is not set
 # CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
 # CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
 # CONFIG_PHONE is not set
 
 #
@@ -826,6 +728,7 @@ CONFIG_8139CP=y
 #
 CONFIG_INPUT=y
 # CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
 
 #
 # Userland interfaces
@@ -835,7 +738,6 @@ CONFIG_INPUT_MOUSEDEV=y
 CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
 # CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
 # CONFIG_INPUT_EVDEV is not set
 # CONFIG_INPUT_EVBUG is not set
 
@@ -845,6 +747,7 @@ CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
 # CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
 # CONFIG_INPUT_TOUCHSCREEN is not set
 # CONFIG_INPUT_MISC is not set
 
@@ -858,10 +761,13 @@ CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
 # Character devices
 #
 CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
 # CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
 # CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_NOZOMI is not set
 
 #
 # Serial drivers
@@ -880,22 +786,10 @@ CONFIG_SERIAL_CORE_CONSOLE=y
 CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
 # CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
 CONFIG_HW_RANDOM=y
-# CONFIG_GEN_RTC is not set
-# CONFIG_DTLK is not set
 # CONFIG_R3964 is not set
 # CONFIG_APPLICOM is not set
-# CONFIG_DRM is not set
 
 #
 # PCMCIA character devices
@@ -903,65 +797,77 @@ CONFIG_HW_RANDOM=y
 # CONFIG_SYNCLINK_CS is not set
 # CONFIG_CARDMAN_4000 is not set
 # CONFIG_CARDMAN_4040 is not set
+# CONFIG_IPWIRELESS is not set
 # CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
 # CONFIG_TCG_TPM is not set
-
-#
-# I2C support
-#
+CONFIG_DEVPORT=y
 # CONFIG_I2C is not set
-
-#
-# SPI support
-#
 # CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
-
-#
-# Dallas's 1-wire bus
-#
 # CONFIG_W1 is not set
-
-#
-# Hardware Monitoring support
-#
+# CONFIG_POWER_SUPPLY is not set
 CONFIG_HWMON=y
 # CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_ABITUGURU is not set
+# CONFIG_SENSORS_I5K_AMB is not set
 # CONFIG_SENSORS_F71805F is not set
+# CONFIG_SENSORS_F71882FG is not set
+# CONFIG_SENSORS_IT87 is not set
+# CONFIG_SENSORS_PC87360 is not set
+# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_SIS5595 is not set
+# CONFIG_SENSORS_SMSC47M1 is not set
+# CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_VIA686A is not set
 # CONFIG_SENSORS_VT1211 is not set
+# CONFIG_SENSORS_VT8231 is not set
+# CONFIG_SENSORS_W83627HF is not set
+# CONFIG_SENSORS_W83627EHF is not set
 # CONFIG_HWMON_DEBUG_CHIP is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+# CONFIG_WATCHDOG is not set
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
 
 #
 # Multimedia devices
 #
-CONFIG_VIDEO_DEV=m
-CONFIG_VIDEO_V4L1=y
-CONFIG_VIDEO_V4L1_COMPAT=y
-CONFIG_VIDEO_V4L2=y
 
 #
-# Video Capture Adapters
+# Multimedia core support
 #
+CONFIG_VIDEO_DEV=m
+CONFIG_VIDEO_V4L2_COMMON=m
+CONFIG_VIDEO_ALLOW_V4L1=y
+CONFIG_VIDEO_V4L1_COMPAT=y
+# CONFIG_DVB_CORE is not set
+CONFIG_VIDEO_MEDIA=m
 
 #
-# Video Capture Adapters
+# Multimedia drivers
 #
+# CONFIG_MEDIA_ATTACH is not set
+CONFIG_VIDEO_V4L2=m
+CONFIG_VIDEO_V4L1=m
+CONFIG_VIDEO_CAPTURE_DRIVERS=y
 # CONFIG_VIDEO_ADV_DEBUG is not set
 CONFIG_VIDEO_HELPER_CHIPS_AUTO=y
 # CONFIG_VIDEO_VIVI is not set
-# CONFIG_VIDEO_PMS is not set
 # CONFIG_VIDEO_CPIA is not set
 # CONFIG_VIDEO_CPIA2 is not set
-# CONFIG_VIDEO_STRADIS is not set
-
-#
-# V4L USB devices
-#
+CONFIG_V4L_USB_DRIVERS=y
+# CONFIG_USB_VIDEO_CLASS is not set
+# CONFIG_USB_GSPCA is not set
 CONFIG_VIDEO_USBVIDEO=m
 CONFIG_USB_VICAM=m
 CONFIG_USB_IBMCAM=m
@@ -975,106 +881,100 @@ CONFIG_USB_STV680=m
 # CONFIG_USB_ZC0301 is not set
 CONFIG_USB_PWC=m
 # CONFIG_USB_PWC_DEBUG is not set
-
-#
-# Radio Adapters
-#
-# CONFIG_RADIO_CADET is not set
-# CONFIG_RADIO_RTRACK is not set
-# CONFIG_RADIO_RTRACK2 is not set
-# CONFIG_RADIO_AZTECH is not set
-# CONFIG_RADIO_GEMTEK is not set
+# CONFIG_USB_ZR364XX is not set
+# CONFIG_USB_STKWEBCAM is not set
+# CONFIG_USB_S2255 is not set
+# CONFIG_SOC_CAMERA is not set
+# CONFIG_VIDEO_SH_MOBILE_CEU is not set
+CONFIG_RADIO_ADAPTERS=y
 # CONFIG_RADIO_GEMTEK_PCI is not set
 # CONFIG_RADIO_MAXIRADIO is not set
 # CONFIG_RADIO_MAESTRO is not set
-# CONFIG_RADIO_SF16FMI is not set
-# CONFIG_RADIO_SF16FMR2 is not set
-# CONFIG_RADIO_TERRATEC is not set
-# CONFIG_RADIO_TRUST is not set
-# CONFIG_RADIO_TYPHOON is not set
-# CONFIG_RADIO_ZOLTRIX is not set
 CONFIG_USB_DSBR=m
+# CONFIG_USB_SI470X is not set
+# CONFIG_DAB is not set
 
 #
-# Digital Video Broadcasting Devices
+# Graphics support
 #
-# CONFIG_DVB is not set
-CONFIG_USB_DABUSB=m
+# CONFIG_DRM is not set
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
-# Graphics support
+# Display device support
 #
-CONFIG_FIRMWARE_EDID=y
-# CONFIG_FB is not set
+# CONFIG_DISPLAY_SUPPORT is not set
 
 #
 # Console display driver support
 #
-# CONFIG_MDA_CONSOLE is not set
 CONFIG_DUMMY_CONSOLE=y
 CONFIG_FONT_8x16=y
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Sound
-#
 CONFIG_SOUND=m
-
-#
-# Advanced Linux Sound Architecture
-#
 # CONFIG_SND is not set
+CONFIG_SOUND_PRIME=m
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+# CONFIG_HID_DEBUG is not set
+# CONFIG_HIDRAW is not set
 
 #
-# Open Sound System
+# USB Input Devices
 #
-CONFIG_SOUND_PRIME=m
-# CONFIG_OSS_OBSOLETE_DRIVER is not set
-# CONFIG_SOUND_BT878 is not set
-# CONFIG_SOUND_ES1371 is not set
-# CONFIG_SOUND_ICH is not set
-# CONFIG_SOUND_TRIDENT is not set
-# CONFIG_SOUND_MSNDCLAS is not set
-# CONFIG_SOUND_MSNDPIN is not set
-# CONFIG_SOUND_VIA82CXXX is not set
+CONFIG_USB_HID=m
+# CONFIG_USB_HIDINPUT_POWERBOOK is not set
+# CONFIG_HID_FF is not set
+# CONFIG_USB_HIDDEV is not set
 
 #
-# USB support
+# USB HID Boot Protocol drivers
 #
+# CONFIG_USB_KBD is not set
+# CONFIG_USB_MOUSE is not set
+CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
 CONFIG_USB_ARCH_HAS_EHCI=y
 CONFIG_USB=y
 # CONFIG_USB_DEBUG is not set
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
 
 #
 # Miscellaneous USB options
 #
 CONFIG_USB_DEVICEFS=y
-# CONFIG_USB_BANDWIDTH is not set
+CONFIG_USB_DEVICE_CLASS=y
 # CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_MULTITHREAD_PROBE is not set
 # CONFIG_USB_OTG is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
 
 #
 # USB Host Controller Drivers
 #
+# CONFIG_USB_C67X00_HCD is not set
 CONFIG_USB_EHCI_HCD=y
-# CONFIG_USB_EHCI_SPLIT_ISO is not set
 # CONFIG_USB_EHCI_ROOT_HUB_TT is not set
 # CONFIG_USB_EHCI_TT_NEWSCHED is not set
 # CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
 CONFIG_USB_OHCI_HCD=y
-# CONFIG_USB_OHCI_BIG_ENDIAN is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
 CONFIG_USB_OHCI_LITTLE_ENDIAN=y
 # CONFIG_USB_UHCI_HCD is not set
 # CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
 
 #
 # USB Device Class drivers
 #
 # CONFIG_USB_ACM is not set
 CONFIG_USB_PRINTER=m
+# CONFIG_USB_WDM is not set
 
 #
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
@@ -1094,66 +994,28 @@ CONFIG_USB_STORAGE_SDDR09=y
 CONFIG_USB_STORAGE_SDDR55=y
 CONFIG_USB_STORAGE_JUMPSHOT=y
 # CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_ONETOUCH is not set
 # CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
 # CONFIG_USB_LIBUSUAL is not set
 
 #
-# USB Input Devices
-#
-CONFIG_USB_HID=m
-CONFIG_USB_HIDINPUT=y
-# CONFIG_USB_HIDINPUT_POWERBOOK is not set
-# CONFIG_HID_FF is not set
-# CONFIG_USB_HIDDEV is not set
-
-#
-# USB HID Boot Protocol drivers
-#
-# CONFIG_USB_KBD is not set
-# CONFIG_USB_MOUSE is not set
-# CONFIG_USB_AIPTEK is not set
-# CONFIG_USB_WACOM is not set
-# CONFIG_USB_ACECAD is not set
-# CONFIG_USB_KBTAB is not set
-# CONFIG_USB_POWERMATE is not set
-# CONFIG_USB_TOUCHSCREEN is not set
-# CONFIG_USB_YEALINK is not set
-# CONFIG_USB_XPAD is not set
-# CONFIG_USB_ATI_REMOTE is not set
-# CONFIG_USB_ATI_REMOTE2 is not set
-# CONFIG_USB_KEYSPAN_REMOTE is not set
-# CONFIG_USB_APPLETOUCH is not set
-
-#
 # USB Imaging devices
 #
 # CONFIG_USB_MDC800 is not set
 # CONFIG_USB_MICROTEK is not set
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-CONFIG_USB_PEGASUS=m
-CONFIG_USB_RTL8150=m
-# CONFIG_USB_USBNET_MII is not set
-# CONFIG_USB_USBNET is not set
 CONFIG_USB_MON=y
 
 #
 # USB port drivers
 #
-
-#
-# USB Serial Converter support
-#
 CONFIG_USB_SERIAL=m
+# CONFIG_USB_EZUSB is not set
 # CONFIG_USB_SERIAL_GENERIC is not set
 # CONFIG_USB_SERIAL_AIRCABLE is not set
-# CONFIG_USB_SERIAL_AIRPRIME is not set
 # CONFIG_USB_SERIAL_ARK3116 is not set
 # CONFIG_USB_SERIAL_BELKIN is not set
+# CONFIG_USB_SERIAL_CH341 is not set
 # CONFIG_USB_SERIAL_WHITEHEAT is not set
 # CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
 # CONFIG_USB_SERIAL_CP2101 is not set
@@ -1168,6 +1030,7 @@ CONFIG_USB_SERIAL_FTDI_SIO=m
 # CONFIG_USB_SERIAL_EDGEPORT_TI is not set
 # CONFIG_USB_SERIAL_GARMIN is not set
 # CONFIG_USB_SERIAL_IPW is not set
+# CONFIG_USB_SERIAL_IUU is not set
 # CONFIG_USB_SERIAL_KEYSPAN_PDA is not set
 # CONFIG_USB_SERIAL_KEYSPAN is not set
 # CONFIG_USB_SERIAL_KLSI is not set
@@ -1175,8 +1038,11 @@ CONFIG_USB_SERIAL_FTDI_SIO=m
 # CONFIG_USB_SERIAL_MCT_U232 is not set
 # CONFIG_USB_SERIAL_MOS7720 is not set
 # CONFIG_USB_SERIAL_MOS7840 is not set
+# CONFIG_USB_SERIAL_MOTOROLA is not set
 # CONFIG_USB_SERIAL_NAVMAN is not set
 CONFIG_USB_SERIAL_PL2303=m
+# CONFIG_USB_SERIAL_OTI6858 is not set
+# CONFIG_USB_SERIAL_SPCP8X5 is not set
 # CONFIG_USB_SERIAL_HP4X is not set
 # CONFIG_USB_SERIAL_SAFE is not set
 # CONFIG_USB_SERIAL_SIERRAWIRELESS is not set
@@ -1197,6 +1063,7 @@ CONFIG_USB_EMI26=m
 # CONFIG_USB_RIO500 is not set
 # CONFIG_USB_LEGOTOWER is not set
 # CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
 # CONFIG_USB_LED is not set
 # CONFIG_USB_CYPRESS_CY7C63 is not set
 # CONFIG_USB_CYTHERM is not set
@@ -1208,61 +1075,18 @@ CONFIG_USB_SISUSBVGA=m
 CONFIG_USB_SISUSBVGA_CON=y
 # CONFIG_USB_LD is not set
 # CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
 # CONFIG_USB_TEST is not set
-
-#
-# USB DSL modem support
-#
-
-#
-# USB Gadget Support
-#
+# CONFIG_USB_ISIGHTFW is not set
 # CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
 # CONFIG_MMC is not set
-
-#
-# LED devices
-#
+# CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
-
-#
-# LED drivers
-#
-
-#
-# LED Triggers
-#
-
-#
-# InfiniBand support
-#
+# CONFIG_ACCESSIBILITY is not set
 # CONFIG_INFINIBAND is not set
-
-#
-# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
-#
-
-#
-# Real Time Clock
-#
 # CONFIG_RTC_CLASS is not set
-
-#
-# DMA Engine support
-#
-# CONFIG_DMA_ENGINE is not set
-
-#
-# DMA Clients
-#
-
-#
-# DMA Devices
-#
+# CONFIG_DMADEVICES is not set
+# CONFIG_UIO is not set
 
 #
 # File systems
@@ -1276,7 +1100,6 @@ CONFIG_EXT3_FS_XATTR=y
 # CONFIG_EXT3_FS_SECURITY is not set
 # CONFIG_EXT4DEV_FS is not set
 CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
 CONFIG_FS_MBCACHE=y
 CONFIG_REISERFS_FS=y
 # CONFIG_REISERFS_CHECK is not set
@@ -1285,14 +1108,11 @@ CONFIG_REISERFS_FS=y
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
 # CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-CONFIG_ROMFS_FS=y
+CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
 # CONFIG_FUSE_FS is not set
@@ -1328,7 +1148,6 @@ CONFIG_TMPFS=y
 # CONFIG_TMPFS_POSIX_ACL is not set
 # CONFIG_HUGETLBFS is not set
 # CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
 # CONFIG_CONFIGFS_FS is not set
 
 #
@@ -1343,26 +1162,24 @@ CONFIG_RAMFS=y
 # CONFIG_EFS_FS is not set
 # CONFIG_CRAMFS is not set
 # CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
+CONFIG_ROMFS_FS=y
 # CONFIG_SYSV_FS is not set
 CONFIG_UFS_FS=m
 # CONFIG_UFS_FS_WRITE is not set
 # CONFIG_UFS_DEBUG is not set
-
-#
-# Network File Systems
-#
+CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=m
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 # CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
 CONFIG_NFSD=m
 CONFIG_NFSD_V3=y
 # CONFIG_NFSD_V3_ACL is not set
 # CONFIG_NFSD_V4 is not set
-CONFIG_NFSD_TCP=y
 CONFIG_LOCKD=m
 CONFIG_LOCKD_V4=y
 CONFIG_EXPORTFS=m
@@ -1376,17 +1193,12 @@ CONFIG_SMB_FS=m
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
 # CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
 
 #
 # Partition Types
 #
 # CONFIG_PARTITION_ADVANCED is not set
 CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
 CONFIG_NLS=y
 CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=y
@@ -1427,46 +1239,128 @@ CONFIG_NLS_CODEPAGE_932=y
 # CONFIG_NLS_KOI8_R is not set
 # CONFIG_NLS_KOI8_U is not set
 # CONFIG_NLS_UTF8 is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
+# CONFIG_DLM is not set
 
 #
 # Kernel hacking
 #
 CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 # CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
 # CONFIG_MAGIC_SYSRQ is not set
 # CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_KERNEL is not set
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_DEBUG_BUGVERBOSE is not set
 # CONFIG_DEBUG_FS is not set
 # CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_KERNEL is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_SAMPLES is not set
 CONFIG_SH_STANDARD_BIOS=y
 # CONFIG_EARLY_SCIF_CONSOLE is not set
 # CONFIG_EARLY_PRINTK is not set
-# CONFIG_KGDB is not set
+# CONFIG_SH_KGDB is not set
 
 #
 # Security options
 #
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+# CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_MD4 is not set
+# CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
 
 #
-# Cryptographic options
+# Compression
 #
-# CONFIG_CRYPTO is not set
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_LZO is not set
+CONFIG_CRYPTO_HW=y
+# CONFIG_CRYPTO_DEV_HIFN_795X is not set
 
 #
 # Library routines
 #
+CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
+CONFIG_CRC_T10DIF=y
+# CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
 # CONFIG_LIBCRC32C is not set
 CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
diff --git a/arch/sh/configs/lboxre2_defconfig b/arch/sh/configs/lboxre2_defconfig
index b68b6cdbb78f..aecdfd33c695 100644
--- a/arch/sh/configs/lboxre2_defconfig
+++ b/arch/sh/configs/lboxre2_defconfig
@@ -1,9 +1,11 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.21-rc4
-# Sat Mar 24 22:04:27 2007
+# Linux kernel version: 2.6.26
+# Wed Jul 30 01:39:41 2008
 #
 CONFIG_SUPERH=y
+CONFIG_SUPERH32=y
+CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig"
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
 CONFIG_GENERIC_BUG=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
@@ -11,37 +13,40 @@ CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_IRQ_PROBE=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
-# CONFIG_GENERIC_TIME is not set
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_SYS_SUPPORTS_PCI=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 # CONFIG_ARCH_HAS_ILOG2_U32 is not set
 # CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_ARCH_NO_VIRT_TO_BUS=y
+CONFIG_ARCH_SUPPORTS_AOUT=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
-# Code maturity level options
+# General setup
 #
 CONFIG_EXPERIMENTAL=y
 CONFIG_BROKEN_ON_SMP=y
 CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
 CONFIG_LOCALVERSION=""
 CONFIG_LOCALVERSION_AUTO=y
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-# CONFIG_IPC_NS is not set
 CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_POSIX_MQUEUE is not set
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
-# CONFIG_UTS_NS is not set
 # CONFIG_AUDIT is not set
 # CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+# CONFIG_GROUP_SCHED is not set
 CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
 # CONFIG_BLK_DEV_INITRD is not set
 CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 CONFIG_SYSCTL=y
@@ -54,34 +59,48 @@ CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
-CONFIG_SLAB=y
 CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
+# CONFIG_HAVE_IOREMAP_PROT is not set
+# CONFIG_HAVE_KPROBES is not set
+# CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_ARCH_TRACEHOOK is not set
+# CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+CONFIG_HAVE_CLK=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
-# CONFIG_SLOB is not set
-
-#
-# Loadable module support
-#
 CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
 CONFIG_MODULE_FORCE_UNLOAD=y
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_KMOD=y
-
-#
-# Block layer
-#
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -95,66 +114,26 @@ CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_CFQ is not set
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_CLASSIC_RCU=y
 
 #
 # System type
 #
-# CONFIG_SH_SOLUTION_ENGINE is not set
-# CONFIG_SH_7751_SOLUTION_ENGINE is not set
-# CONFIG_SH_7300_SOLUTION_ENGINE is not set
-# CONFIG_SH_7343_SOLUTION_ENGINE is not set
-# CONFIG_SH_73180_SOLUTION_ENGINE is not set
-# CONFIG_SH_7751_SYSTEMH is not set
-# CONFIG_SH_HP6XX is not set
-# CONFIG_SH_SATURN is not set
-# CONFIG_SH_DREAMCAST is not set
-# CONFIG_SH_MPC1211 is not set
-# CONFIG_SH_SH03 is not set
-# CONFIG_SH_SECUREEDGE5410 is not set
-# CONFIG_SH_HS7751RVOIP is not set
-# CONFIG_SH_7710VOIPGW is not set
-# CONFIG_SH_RTS7751R2D is not set
-# CONFIG_SH_HIGHLANDER is not set
-# CONFIG_SH_EDOSK7705 is not set
-# CONFIG_SH_SH4202_MICRODEV is not set
-# CONFIG_SH_LANDISK is not set
-# CONFIG_SH_TITAN is not set
-# CONFIG_SH_SHMIN is not set
-# CONFIG_SH_7206_SOLUTION_ENGINE is not set
-# CONFIG_SH_7619_SOLUTION_ENGINE is not set
-CONFIG_SH_LBOX_RE2=y
-# CONFIG_SH_UNKNOWN is not set
-
-#
-# Processor selection
-#
 CONFIG_CPU_SH4=y
-
-#
-# SH-2 Processor Support
-#
-# CONFIG_CPU_SUBTYPE_SH7604 is not set
 # CONFIG_CPU_SUBTYPE_SH7619 is not set
-
-#
-# SH-2A Processor Support
-#
+# CONFIG_CPU_SUBTYPE_SH7203 is not set
 # CONFIG_CPU_SUBTYPE_SH7206 is not set
-
-#
-# SH-3 Processor Support
-#
-# CONFIG_CPU_SUBTYPE_SH7300 is not set
+# CONFIG_CPU_SUBTYPE_SH7263 is not set
+# CONFIG_CPU_SUBTYPE_MXG is not set
 # CONFIG_CPU_SUBTYPE_SH7705 is not set
 # CONFIG_CPU_SUBTYPE_SH7706 is not set
 # CONFIG_CPU_SUBTYPE_SH7707 is not set
 # CONFIG_CPU_SUBTYPE_SH7708 is not set
 # CONFIG_CPU_SUBTYPE_SH7709 is not set
 # CONFIG_CPU_SUBTYPE_SH7710 is not set
-
-#
-# SH-4 Processor Support
-#
+# CONFIG_CPU_SUBTYPE_SH7712 is not set
+# CONFIG_CPU_SUBTYPE_SH7720 is not set
+# CONFIG_CPU_SUBTYPE_SH7721 is not set
 # CONFIG_CPU_SUBTYPE_SH7750 is not set
 # CONFIG_CPU_SUBTYPE_SH7091 is not set
 # CONFIG_CPU_SUBTYPE_SH7750R is not set
@@ -163,55 +142,60 @@ CONFIG_CPU_SH4=y
 CONFIG_CPU_SUBTYPE_SH7751R=y
 # CONFIG_CPU_SUBTYPE_SH7760 is not set
 # CONFIG_CPU_SUBTYPE_SH4_202 is not set
-
-#
-# ST40 Processor Support
-#
-# CONFIG_CPU_SUBTYPE_ST40STB1 is not set
-# CONFIG_CPU_SUBTYPE_ST40GX1 is not set
-
-#
-# SH-4A Processor Support
-#
+# CONFIG_CPU_SUBTYPE_SH7723 is not set
+# CONFIG_CPU_SUBTYPE_SH7763 is not set
 # CONFIG_CPU_SUBTYPE_SH7770 is not set
 # CONFIG_CPU_SUBTYPE_SH7780 is not set
 # CONFIG_CPU_SUBTYPE_SH7785 is not set
-
-#
-# SH4AL-DSP Processor Support
-#
-# CONFIG_CPU_SUBTYPE_SH73180 is not set
+# CONFIG_CPU_SUBTYPE_SHX3 is not set
 # CONFIG_CPU_SUBTYPE_SH7343 is not set
 # CONFIG_CPU_SUBTYPE_SH7722 is not set
+# CONFIG_CPU_SUBTYPE_SH7366 is not set
+# CONFIG_CPU_SUBTYPE_SH5_101 is not set
+# CONFIG_CPU_SUBTYPE_SH5_103 is not set
 
 #
 # Memory management options
 #
+CONFIG_QUICKLIST=y
 CONFIG_MMU=y
 CONFIG_PAGE_OFFSET=0x80000000
 CONFIG_MEMORY_START=0x0c000000
 CONFIG_MEMORY_SIZE=0x04000000
+CONFIG_29BIT=y
 CONFIG_VSYSCALL=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_SPARSEMEM_ENABLE=y
+CONFIG_ARCH_SPARSEMEM_DEFAULT=y
+CONFIG_MAX_ACTIVE_REGIONS=1
+CONFIG_ARCH_POPULATES_NODE_MAP=y
+CONFIG_ARCH_SELECT_MEMORY_MODEL=y
 CONFIG_PAGE_SIZE_4KB=y
 # CONFIG_PAGE_SIZE_8KB is not set
+# CONFIG_PAGE_SIZE_16KB is not set
 # CONFIG_PAGE_SIZE_64KB is not set
+CONFIG_ENTRY_OFFSET=0x00001000
 CONFIG_SELECT_MEMORY_MODEL=y
 CONFIG_FLATMEM_MANUAL=y
 # CONFIG_DISCONTIGMEM_MANUAL is not set
 # CONFIG_SPARSEMEM_MANUAL is not set
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPARSEMEM_STATIC=y
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_RESOURCES_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
+CONFIG_NR_QUICK=2
 
 #
 # Cache configuration
 #
 # CONFIG_SH_DIRECT_MAPPED is not set
-# CONFIG_SH_WRITETHROUGH is not set
-# CONFIG_SH_OCRAM is not set
+CONFIG_CACHE_WRITEBACK=y
+# CONFIG_CACHE_WRITETHROUGH is not set
+# CONFIG_CACHE_OFF is not set
 
 #
 # Processor features
@@ -219,12 +203,21 @@ CONFIG_ZONE_DMA_FLAG=0
 CONFIG_CPU_LITTLE_ENDIAN=y
 # CONFIG_CPU_BIG_ENDIAN is not set
 CONFIG_SH_FPU=y
-# CONFIG_SH_DSP is not set
 # CONFIG_SH_STORE_QUEUES is not set
 CONFIG_CPU_HAS_INTEVT=y
-CONFIG_CPU_HAS_INTC_IRQ=y
 CONFIG_CPU_HAS_SR_RB=y
 CONFIG_CPU_HAS_PTEA=y
+CONFIG_CPU_HAS_FPU=y
+
+#
+# Board support
+#
+# CONFIG_SH_7751_SYSTEMH is not set
+# CONFIG_SH_SECUREEDGE5410 is not set
+# CONFIG_SH_RTS7751R2D is not set
+# CONFIG_SH_LANDISK is not set
+# CONFIG_SH_TITAN is not set
+CONFIG_SH_LBOX_RE2=y
 
 #
 # Timer and clock configuration
@@ -232,6 +225,10 @@ CONFIG_CPU_HAS_PTEA=y
 CONFIG_SH_TMU=y
 CONFIG_SH_TIMER_IRQ=16
 CONFIG_SH_PCLK_FREQ=40000000
+# CONFIG_TICK_ONESHOT is not set
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
 
 #
 # CPU Frequency scaling
@@ -246,7 +243,6 @@ CONFIG_SH_PCLK_FREQ=40000000
 #
 # Companion Chips
 #
-# CONFIG_HD6446X_SERIES is not set
 
 #
 # Additional SuperH Device Drivers
@@ -262,11 +258,14 @@ CONFIG_HZ_250=y
 # CONFIG_HZ_300 is not set
 # CONFIG_HZ_1000 is not set
 CONFIG_HZ=250
+# CONFIG_SCHED_HRTICK is not set
 CONFIG_KEXEC=y
-# CONFIG_SMP is not set
+# CONFIG_CRASH_DUMP is not set
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
+CONFIG_GUSA=y
+# CONFIG_GUSA_RB is not set
 
 #
 # Boot options
@@ -280,15 +279,12 @@ CONFIG_CMDLINE="console=ttySC1,115200 root=/dev/sda1"
 #
 # Bus options
 #
-CONFIG_ISA=y
 CONFIG_PCI=y
 CONFIG_SH_PCIDMA_NONCOHERENT=y
 CONFIG_PCI_AUTO=y
 CONFIG_PCI_AUTO_UPDATE_RESOURCES=y
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+CONFIG_PCI_LEGACY=y
 CONFIG_PCCARD=y
 CONFIG_PCMCIA_DEBUG=y
 CONFIG_PCMCIA=y
@@ -306,29 +302,16 @@ CONFIG_YENTA_O2=y
 # CONFIG_YENTA_TOSHIBA is not set
 # CONFIG_PD6729 is not set
 # CONFIG_I82092 is not set
-# CONFIG_I82365 is not set
-# CONFIG_TCIC is not set
-CONFIG_PCMCIA_PROBE=y
 CONFIG_PCCARD_NONSTATIC=y
-
-#
-# PCI Hotplug Support
-#
 # CONFIG_HOTPLUG_PCI is not set
 
 #
 # Executable file formats
 #
 CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_FLAT is not set
 # CONFIG_BINFMT_MISC is not set
 
 #
-# Power management options (EXPERIMENTAL)
-#
-# CONFIG_PM is not set
-
-#
 # Networking
 #
 CONFIG_NET=y
@@ -336,7 +319,6 @@ CONFIG_NET=y
 #
 # Networking options
 #
-# CONFIG_NETDEBUG is not set
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -344,6 +326,7 @@ CONFIG_XFRM=y
 # CONFIG_XFRM_USER is not set
 # CONFIG_XFRM_SUB_POLICY is not set
 # CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
 # CONFIG_NET_KEY is not set
 CONFIG_INET=y
 # CONFIG_IP_MULTICAST is not set
@@ -370,29 +353,26 @@ CONFIG_IP_PNP=y
 CONFIG_INET_XFRM_MODE_TRANSPORT=y
 CONFIG_INET_XFRM_MODE_TUNNEL=y
 CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
 CONFIG_INET_DIAG=y
 CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
 CONFIG_TCP_CONG_CUBIC=y
 CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_TCP_MD5SIG is not set
-
-#
-# IP: Virtual Server Configuration
-#
 # CONFIG_IP_VS is not set
 # CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
 # CONFIG_NETWORK_SECMARK is not set
 CONFIG_NETFILTER=y
 # CONFIG_NETFILTER_DEBUG is not set
+CONFIG_NETFILTER_ADVANCED=y
 
 #
 # Core Netfilter Configuration
 #
-# CONFIG_NETFILTER_NETLINK is not set
-# CONFIG_NF_CONNTRACK_ENABLED is not set
+# CONFIG_NETFILTER_NETLINK_QUEUE is not set
+# CONFIG_NETFILTER_NETLINK_LOG is not set
+# CONFIG_NF_CONNTRACK is not set
 # CONFIG_NETFILTER_XTABLES is not set
 
 #
@@ -401,20 +381,8 @@ CONFIG_NETFILTER=y
 # CONFIG_IP_NF_QUEUE is not set
 # CONFIG_IP_NF_IPTABLES is not set
 # CONFIG_IP_NF_ARPTABLES is not set
-
-#
-# DCCP Configuration (EXPERIMENTAL)
-#
 # CONFIG_IP_DCCP is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
 # CONFIG_IP_SCTP is not set
-
-#
-# TIPC Configuration (EXPERIMENTAL)
-#
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
@@ -427,10 +395,6 @@ CONFIG_NETFILTER=y
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
 # CONFIG_NET_SCHED is not set
 
 #
@@ -438,9 +402,20 @@ CONFIG_NETFILTER=y
 #
 # CONFIG_NET_PKTGEN is not set
 # CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
 # CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
 
 #
 # Device Drivers
@@ -449,36 +424,17 @@ CONFIG_NETFILTER=y
 #
 # Generic Driver Options
 #
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_SYS_HYPERVISOR is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
 # CONFIG_CONNECTOR is not set
-
-#
-# Memory Technology Devices (MTD)
-#
 # CONFIG_MTD is not set
-
-#
-# Parallel port support
-#
 # CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-# CONFIG_PNP is not set
-# CONFIG_PNPACPI is not set
-
-#
-# Block devices
-#
-# CONFIG_BLK_CPQ_DA is not set
+CONFIG_BLK_DEV=y
 # CONFIG_BLK_CPQ_CISS_DA is not set
 # CONFIG_BLK_DEV_DAC960 is not set
 # CONFIG_BLK_DEV_UMEM is not set
@@ -490,19 +446,18 @@ CONFIG_BLK_DEV_LOOP=y
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
-
-#
-# Misc devices
-#
+# CONFIG_BLK_DEV_HD is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_PHANTOM is not set
+# CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
+# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_HP_ILO is not set
+CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
 #
@@ -510,6 +465,7 @@ CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
 #
 # CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
 # CONFIG_SCSI_TGT is not set
 # CONFIG_SCSI_NETLINK is not set
 CONFIG_SCSI_PROC_FS=y
@@ -531,6 +487,7 @@ CONFIG_BLK_DEV_SD=y
 # CONFIG_SCSI_CONSTANTS is not set
 # CONFIG_SCSI_LOGGING is not set
 # CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
 
 #
 # SCSI Transports
@@ -538,71 +495,49 @@ CONFIG_BLK_DEV_SD=y
 # CONFIG_SCSI_SPI_ATTRS is not set
 # CONFIG_SCSI_FC_ATTRS is not set
 # CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_ATTRS is not set
 # CONFIG_SCSI_SAS_LIBSAS is not set
-
-#
-# SCSI low-level drivers
-#
+# CONFIG_SCSI_SRP_ATTRS is not set
+CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_ISCSI_TCP is not set
 # CONFIG_BLK_DEV_3W_XXXX_RAID is not set
 # CONFIG_SCSI_3W_9XXX is not set
 # CONFIG_SCSI_ACARD is not set
-# CONFIG_SCSI_AHA152X is not set
 # CONFIG_SCSI_AACRAID is not set
 # CONFIG_SCSI_AIC7XXX is not set
 # CONFIG_SCSI_AIC7XXX_OLD is not set
 # CONFIG_SCSI_AIC79XX is not set
 # CONFIG_SCSI_AIC94XX is not set
-# CONFIG_SCSI_DPT_I2O is not set
-# CONFIG_SCSI_IN2000 is not set
 # CONFIG_SCSI_ARCMSR is not set
 # CONFIG_MEGARAID_NEWGEN is not set
 # CONFIG_MEGARAID_LEGACY is not set
 # CONFIG_MEGARAID_SAS is not set
 # CONFIG_SCSI_HPTIOP is not set
 # CONFIG_SCSI_DMX3191D is not set
-# CONFIG_SCSI_DTC3280 is not set
 # CONFIG_SCSI_FUTURE_DOMAIN is not set
-# CONFIG_SCSI_GENERIC_NCR5380 is not set
-# CONFIG_SCSI_GENERIC_NCR5380_MMIO is not set
 # CONFIG_SCSI_IPS is not set
 # CONFIG_SCSI_INITIO is not set
 # CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_NCR53C406A is not set
+# CONFIG_SCSI_MVSAS is not set
 # CONFIG_SCSI_STEX is not set
 # CONFIG_SCSI_SYM53C8XX_2 is not set
 # CONFIG_SCSI_IPR is not set
-# CONFIG_SCSI_PAS16 is not set
-# CONFIG_SCSI_PSI240I is not set
-# CONFIG_SCSI_QLOGIC_FAS is not set
 # CONFIG_SCSI_QLOGIC_1280 is not set
 # CONFIG_SCSI_QLA_FC is not set
 # CONFIG_SCSI_QLA_ISCSI is not set
 # CONFIG_SCSI_LPFC is not set
-# CONFIG_SCSI_SYM53C416 is not set
 # CONFIG_SCSI_DC395x is not set
 # CONFIG_SCSI_DC390T is not set
-# CONFIG_SCSI_T128 is not set
 # CONFIG_SCSI_NSP32 is not set
 # CONFIG_SCSI_DEBUG is not set
 # CONFIG_SCSI_SRP is not set
-
-#
-# PCMCIA SCSI adapter support
-#
-# CONFIG_PCMCIA_AHA152X is not set
-# CONFIG_PCMCIA_FDOMAIN is not set
-# CONFIG_PCMCIA_NINJA_SCSI is not set
-# CONFIG_PCMCIA_QLOGIC is not set
-# CONFIG_PCMCIA_SYM53C500 is not set
-
-#
-# Serial ATA (prod) and Parallel ATA (experimental) drivers
-#
+# CONFIG_SCSI_LOWLEVEL_PCMCIA is not set
+# CONFIG_SCSI_DH is not set
 CONFIG_ATA=y
 # CONFIG_ATA_NONSTANDARD is not set
+CONFIG_SATA_PMP=y
 # CONFIG_SATA_AHCI is not set
+# CONFIG_SATA_SIL24 is not set
+CONFIG_ATA_SFF=y
 # CONFIG_SATA_SVW is not set
 # CONFIG_ATA_PIIX is not set
 # CONFIG_SATA_MV is not set
@@ -612,7 +547,6 @@ CONFIG_ATA=y
 # CONFIG_SATA_PROMISE is not set
 # CONFIG_SATA_SX4 is not set
 # CONFIG_SATA_SIL is not set
-# CONFIG_SATA_SIL24 is not set
 # CONFIG_SATA_SIS is not set
 # CONFIG_SATA_ULI is not set
 # CONFIG_SATA_VIA is not set
@@ -622,6 +556,7 @@ CONFIG_ATA=y
 # CONFIG_PATA_AMD is not set
 # CONFIG_PATA_ARTOP is not set
 # CONFIG_PATA_ATIIXP is not set
+# CONFIG_PATA_CMD640_PCI is not set
 # CONFIG_PATA_CMD64X is not set
 # CONFIG_PATA_CS5520 is not set
 # CONFIG_PATA_CS5530 is not set
@@ -635,18 +570,18 @@ CONFIG_ATA=y
 # CONFIG_PATA_IT821X is not set
 # CONFIG_PATA_IT8213 is not set
 # CONFIG_PATA_JMICRON is not set
-# CONFIG_PATA_LEGACY is not set
 # CONFIG_PATA_TRIFLEX is not set
 # CONFIG_PATA_MARVELL is not set
 # CONFIG_PATA_MPIIX is not set
 # CONFIG_PATA_OLDPIIX is not set
 # CONFIG_PATA_NETCELL is not set
+# CONFIG_PATA_NINJA32 is not set
 # CONFIG_PATA_NS87410 is not set
+# CONFIG_PATA_NS87415 is not set
 # CONFIG_PATA_OPTI is not set
 # CONFIG_PATA_OPTIDMA is not set
 # CONFIG_PATA_PCMCIA is not set
 # CONFIG_PATA_PDC_OLD is not set
-# CONFIG_PATA_QDI is not set
 # CONFIG_PATA_RADISYS is not set
 # CONFIG_PATA_RZ1000 is not set
 # CONFIG_PATA_SC1200 is not set
@@ -656,88 +591,52 @@ CONFIG_ATA=y
 # CONFIG_PATA_SIS is not set
 # CONFIG_PATA_VIA is not set
 # CONFIG_PATA_WINBOND is not set
-# CONFIG_PATA_WINBOND_VLB is not set
 CONFIG_PATA_PLATFORM=y
-
-#
-# Old CD-ROM drivers (not SCSI, not IDE)
-#
-# CONFIG_CD_NO_IDESCSI is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
+# CONFIG_PATA_SCH is not set
 # CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
 # CONFIG_FUSION is not set
-# CONFIG_FUSION_SPI is not set
-# CONFIG_FUSION_FC is not set
-# CONFIG_FUSION_SAS is not set
 
 #
 # IEEE 1394 (FireWire) support
 #
-# CONFIG_IEEE1394 is not set
 
 #
-# I2O device support
+# Enable only one of the two stacks, unless you know what you are doing
 #
+# CONFIG_FIREWIRE is not set
+# CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
-
-#
-# Network device support
-#
 CONFIG_NETDEVICES=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
 # CONFIG_EQUALIZER is not set
 # CONFIG_TUN is not set
-
-#
-# ARCnet devices
-#
+# CONFIG_VETH is not set
 # CONFIG_ARCNET is not set
-
-#
-# PHY device support
-#
 # CONFIG_PHYLIB is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
+# CONFIG_AX88796 is not set
 # CONFIG_STNIC is not set
 # CONFIG_HAPPYMEAL is not set
 # CONFIG_SUNGEM is not set
 # CONFIG_CASSINI is not set
 # CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_NET_VENDOR_SMC is not set
 # CONFIG_SMC91X is not set
-# CONFIG_NET_VENDOR_RACAL is not set
-
-#
-# Tulip family network device support
-#
+# CONFIG_SMC911X is not set
 # CONFIG_NET_TULIP is not set
-# CONFIG_AT1700 is not set
-# CONFIG_DEPCA is not set
 # CONFIG_HP100 is not set
-# CONFIG_NET_ISA is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
 CONFIG_NET_PCI=y
 # CONFIG_PCNET32 is not set
 # CONFIG_AMD8111_ETH is not set
 # CONFIG_ADAPTEC_STARFIRE is not set
-# CONFIG_AC3200 is not set
-# CONFIG_APRICOT is not set
 # CONFIG_B44 is not set
 # CONFIG_FORCEDETH is not set
-# CONFIG_CS89x0 is not set
-# CONFIG_DGRS is not set
 # CONFIG_EEPRO100 is not set
 # CONFIG_E100 is not set
 # CONFIG_FEALNX is not set
@@ -749,19 +648,20 @@ CONFIG_8139TOO_PIO=y
 CONFIG_8139TOO_TUNE_TWISTER=y
 # CONFIG_8139TOO_8129 is not set
 # CONFIG_8139_OLD_RX_RESET is not set
+# CONFIG_R6040 is not set
 # CONFIG_SIS900 is not set
 # CONFIG_EPIC100 is not set
 # CONFIG_SUNDANCE is not set
 # CONFIG_TLAN is not set
 # CONFIG_VIA_RHINE is not set
 # CONFIG_SC92031 is not set
-
-#
-# Ethernet (1000 Mbit)
-#
+CONFIG_NETDEV_1000=y
 # CONFIG_ACENIC is not set
 # CONFIG_DL2K is not set
 # CONFIG_E1000 is not set
+# CONFIG_E1000E is not set
+# CONFIG_IP1000 is not set
+# CONFIG_IGB is not set
 # CONFIG_NS83820 is not set
 # CONFIG_HAMACHI is not set
 # CONFIG_YELLOWFIN is not set
@@ -769,36 +669,33 @@ CONFIG_8139TOO_TUNE_TWISTER=y
 # CONFIG_SIS190 is not set
 # CONFIG_SKGE is not set
 # CONFIG_SKY2 is not set
-# CONFIG_SK98LIN is not set
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
-
-#
-# Ethernet (10000 Mbit)
-#
+# CONFIG_ATL1E is not set
+CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
 # CONFIG_CHELSIO_T3 is not set
+# CONFIG_IXGBE is not set
 # CONFIG_IXGB is not set
 # CONFIG_S2IO is not set
 # CONFIG_MYRI10GE is not set
 # CONFIG_NETXEN_NIC is not set
-
-#
-# Token Ring devices
-#
+# CONFIG_NIU is not set
+# CONFIG_MLX4_CORE is not set
+# CONFIG_TEHUTI is not set
+# CONFIG_BNX2X is not set
+# CONFIG_SFC is not set
 # CONFIG_TR is not set
 
 #
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# PCMCIA network device support
+# Wireless LAN
 #
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
 CONFIG_NET_PCMCIA=y
 # CONFIG_PCMCIA_3C589 is not set
 # CONFIG_PCMCIA_3C574 is not set
@@ -808,29 +705,16 @@ CONFIG_PCMCIA_PCNET=y
 # CONFIG_PCMCIA_SMC91C92 is not set
 # CONFIG_PCMCIA_XIRC2PS is not set
 # CONFIG_PCMCIA_AXNET is not set
-
-#
-# Wan interfaces
-#
 # CONFIG_WAN is not set
 # CONFIG_FDDI is not set
 # CONFIG_HIPPI is not set
 # CONFIG_PPP is not set
 # CONFIG_SLIP is not set
 # CONFIG_NET_FC is not set
-# CONFIG_SHAPER is not set
 # CONFIG_NETCONSOLE is not set
 # CONFIG_NETPOLL is not set
 # CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
 # CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
 # CONFIG_PHONE is not set
 
 #
@@ -838,6 +722,7 @@ CONFIG_PCMCIA_PCNET=y
 #
 CONFIG_INPUT=y
 # CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
 
 #
 # Userland interfaces
@@ -847,7 +732,6 @@ CONFIG_INPUT_MOUSEDEV=y
 CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
 # CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
 # CONFIG_INPUT_EVDEV is not set
 # CONFIG_INPUT_EVBUG is not set
 
@@ -857,6 +741,7 @@ CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
 # CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
 # CONFIG_INPUT_TOUCHSCREEN is not set
 # CONFIG_INPUT_MISC is not set
 
@@ -870,10 +755,13 @@ CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
 # Character devices
 #
 CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
 # CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
 # CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_NOZOMI is not set
 
 #
 # Serial drivers
@@ -892,22 +780,10 @@ CONFIG_SERIAL_CORE_CONSOLE=y
 CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
 # CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
 CONFIG_HW_RANDOM=y
-# CONFIG_GEN_RTC is not set
-# CONFIG_DTLK is not set
 # CONFIG_R3964 is not set
 # CONFIG_APPLICOM is not set
-# CONFIG_DRM is not set
 
 #
 # PCMCIA character devices
@@ -915,125 +791,104 @@ CONFIG_HW_RANDOM=y
 # CONFIG_SYNCLINK_CS is not set
 # CONFIG_CARDMAN_4000 is not set
 # CONFIG_CARDMAN_4040 is not set
+# CONFIG_IPWIRELESS is not set
 # CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
 # CONFIG_TCG_TPM is not set
-
-#
-# I2C support
-#
+CONFIG_DEVPORT=y
 # CONFIG_I2C is not set
-
-#
-# SPI support
-#
 # CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
-
-#
-# Dallas's 1-wire bus
-#
 # CONFIG_W1 is not set
-
-#
-# Hardware Monitoring support
-#
+# CONFIG_POWER_SUPPLY is not set
 CONFIG_HWMON=y
 # CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_ABITUGURU is not set
+# CONFIG_SENSORS_I5K_AMB is not set
 # CONFIG_SENSORS_F71805F is not set
+# CONFIG_SENSORS_F71882FG is not set
+# CONFIG_SENSORS_IT87 is not set
+# CONFIG_SENSORS_PC87360 is not set
 # CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_SIS5595 is not set
+# CONFIG_SENSORS_SMSC47M1 is not set
+# CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_VIA686A is not set
 # CONFIG_SENSORS_VT1211 is not set
+# CONFIG_SENSORS_VT8231 is not set
+# CONFIG_SENSORS_W83627HF is not set
+# CONFIG_SENSORS_W83627EHF is not set
 # CONFIG_HWMON_DEBUG_CHIP is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+# CONFIG_WATCHDOG is not set
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
 
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
 
 #
 # Multimedia devices
 #
+
+#
+# Multimedia core support
+#
 # CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
 
 #
-# Digital Video Broadcasting Devices
+# Multimedia drivers
 #
-# CONFIG_DVB is not set
+# CONFIG_DAB is not set
 
 #
 # Graphics support
 #
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+# CONFIG_DRM is not set
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
 # CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
-# Console display driver support
+# Display device support
 #
-# CONFIG_MDA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
+# CONFIG_DISPLAY_SUPPORT is not set
 
 #
-# Sound
+# Console display driver support
 #
+CONFIG_DUMMY_CONSOLE=y
 # CONFIG_SOUND is not set
-
-#
-# HID Devices
-#
+CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
 # CONFIG_HID_DEBUG is not set
-
-#
-# USB support
-#
+# CONFIG_HIDRAW is not set
+CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
 CONFIG_USB_ARCH_HAS_EHCI=y
 # CONFIG_USB is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
 
 #
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
 #
-
-#
-# USB Gadget Support
-#
 # CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
 # CONFIG_MMC is not set
-
-#
-# LED devices
-#
+# CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
-
-#
-# LED drivers
-#
-
-#
-# LED Triggers
-#
-
-#
-# InfiniBand support
-#
+# CONFIG_ACCESSIBILITY is not set
 # CONFIG_INFINIBAND is not set
-
-#
-# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
-#
-
-#
-# Real Time Clock
-#
 CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
 CONFIG_RTC_HCTOSYS=y
@@ -1047,37 +902,29 @@ CONFIG_RTC_INTF_SYSFS=y
 CONFIG_RTC_INTF_PROC=y
 CONFIG_RTC_INTF_DEV=y
 # CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-
-#
-# RTC drivers
-#
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_SH is not set
 # CONFIG_RTC_DRV_TEST is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# DMA Engine support
-#
-# CONFIG_DMA_ENGINE is not set
-
-#
-# DMA Clients
-#
 
 #
-# DMA Devices
+# SPI RTC drivers
 #
 
 #
-# Auxiliary Display support
+# Platform RTC drivers
 #
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_V3020 is not set
 
 #
-# Virtualization
+# on-CPU RTC drivers
 #
+# CONFIG_RTC_DRV_SH is not set
+# CONFIG_DMADEVICES is not set
+# CONFIG_UIO is not set
 
 #
 # File systems
@@ -1091,20 +938,16 @@ CONFIG_EXT3_FS_XATTR=y
 # CONFIG_EXT3_FS_SECURITY is not set
 # CONFIG_EXT4DEV_FS is not set
 CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
 CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
 # CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-CONFIG_ROMFS_FS=y
+CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
 # CONFIG_FUSE_FS is not set
@@ -1136,7 +979,6 @@ CONFIG_TMPFS=y
 # CONFIG_TMPFS_POSIX_ACL is not set
 # CONFIG_HUGETLBFS is not set
 # CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
 # CONFIG_CONFIGFS_FS is not set
 
 #
@@ -1151,14 +993,14 @@ CONFIG_RAMFS=y
 # CONFIG_EFS_FS is not set
 # CONFIG_CRAMFS is not set
 # CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
+CONFIG_ROMFS_FS=y
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
+CONFIG_NETWORK_FILESYSTEMS=y
 # CONFIG_NFS_FS is not set
 # CONFIG_NFSD is not set
 # CONFIG_SMB_FS is not set
@@ -1166,17 +1008,12 @@ CONFIG_RAMFS=y
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
 # CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
 
 #
 # Partition Types
 #
 # CONFIG_PARTITION_ADVANCED is not set
 CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
 CONFIG_NLS=y
 CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=y
@@ -1217,30 +1054,24 @@ CONFIG_NLS_CODEPAGE_437=y
 # CONFIG_NLS_KOI8_R is not set
 # CONFIG_NLS_KOI8_U is not set
 # CONFIG_NLS_UTF8 is not set
-
-#
-# Distributed Lock Manager
-#
 # CONFIG_DLM is not set
 
 #
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
 # Kernel hacking
 #
 CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 # CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
 # CONFIG_MAGIC_SYSRQ is not set
 # CONFIG_UNUSED_SYMBOLS is not set
 # CONFIG_DEBUG_FS is not set
 # CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
-CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_SAMPLES is not set
 CONFIG_SH_STANDARD_BIOS=y
 # CONFIG_EARLY_SCIF_CONSOLE is not set
 # CONFIG_EARLY_PRINTK is not set
@@ -1251,20 +1082,100 @@ CONFIG_SH_STANDARD_BIOS=y
 #
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+# CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_MD4 is not set
+# CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
 
 #
-# Cryptographic options
+# Compression
 #
-# CONFIG_CRYPTO is not set
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_LZO is not set
+CONFIG_CRYPTO_HW=y
+# CONFIG_CRYPTO_DEV_HIFN_795X is not set
 
 #
 # Library routines
 #
 CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
+CONFIG_CRC_T10DIF=y
+# CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
 # CONFIG_LIBCRC32C is not set
 CONFIG_PLIST=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
diff --git a/arch/sh/configs/magicpanelr2_defconfig b/arch/sh/configs/magicpanelr2_defconfig
index f8398a5f10ee..a3a80f3d27c0 100644
--- a/arch/sh/configs/magicpanelr2_defconfig
+++ b/arch/sh/configs/magicpanelr2_defconfig
@@ -1,9 +1,11 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.23-rc2
-# Fri Aug 17 12:15:16 2007
+# Linux kernel version: 2.6.26
+# Wed Jul 30 01:41:08 2008
 #
 CONFIG_SUPERH=y
+CONFIG_SUPERH32=y
+CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig"
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
 CONFIG_GENERIC_BUG=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
@@ -18,6 +20,7 @@ CONFIG_LOCKDEP_SUPPORT=y
 # CONFIG_ARCH_HAS_ILOG2_U32 is not set
 # CONFIG_ARCH_HAS_ILOG2_U64 is not set
 CONFIG_ARCH_NO_VIRT_TO_BUS=y
+CONFIG_ARCH_SUPPORTS_AOUT=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
@@ -35,12 +38,16 @@ CONFIG_POSIX_MQUEUE=y
 CONFIG_BSD_PROCESS_ACCT=y
 CONFIG_BSD_PROCESS_ACCT_V3=y
 # CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
 CONFIG_AUDIT=y
+# CONFIG_AUDITSYSCALL is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=17
+# CONFIG_CGROUPS is not set
+# CONFIG_GROUP_SCHED is not set
 CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
 CONFIG_RELAY=y
+# CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
@@ -48,6 +55,7 @@ CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
 CONFIG_UID16=y
 CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
@@ -55,6 +63,7 @@ CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
 CONFIG_ANON_INODES=y
@@ -67,10 +76,24 @@ CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
+# CONFIG_HAVE_IOREMAP_PROT is not set
+# CONFIG_HAVE_KPROBES is not set
+# CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_ARCH_TRACEHOOK is not set
+# CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+CONFIG_HAVE_CLK=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 CONFIG_MODVERSIONS=y
@@ -81,6 +104,7 @@ CONFIG_BLOCK=y
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -94,13 +118,17 @@ CONFIG_IOSCHED_NOOP=y
 # CONFIG_DEFAULT_CFQ is not set
 CONFIG_DEFAULT_NOOP=y
 CONFIG_DEFAULT_IOSCHED="noop"
+CONFIG_CLASSIC_RCU=y
 
 #
 # System type
 #
 CONFIG_CPU_SH3=y
 # CONFIG_CPU_SUBTYPE_SH7619 is not set
+# CONFIG_CPU_SUBTYPE_SH7203 is not set
 # CONFIG_CPU_SUBTYPE_SH7206 is not set
+# CONFIG_CPU_SUBTYPE_SH7263 is not set
+# CONFIG_CPU_SUBTYPE_MXG is not set
 # CONFIG_CPU_SUBTYPE_SH7705 is not set
 # CONFIG_CPU_SUBTYPE_SH7706 is not set
 # CONFIG_CPU_SUBTYPE_SH7707 is not set
@@ -109,6 +137,7 @@ CONFIG_CPU_SH3=y
 # CONFIG_CPU_SUBTYPE_SH7710 is not set
 # CONFIG_CPU_SUBTYPE_SH7712 is not set
 CONFIG_CPU_SUBTYPE_SH7720=y
+# CONFIG_CPU_SUBTYPE_SH7721 is not set
 # CONFIG_CPU_SUBTYPE_SH7750 is not set
 # CONFIG_CPU_SUBTYPE_SH7091 is not set
 # CONFIG_CPU_SUBTYPE_SH7750R is not set
@@ -117,14 +146,17 @@ CONFIG_CPU_SUBTYPE_SH7720=y
 # CONFIG_CPU_SUBTYPE_SH7751R is not set
 # CONFIG_CPU_SUBTYPE_SH7760 is not set
 # CONFIG_CPU_SUBTYPE_SH4_202 is not set
-# CONFIG_CPU_SUBTYPE_ST40STB1 is not set
-# CONFIG_CPU_SUBTYPE_ST40GX1 is not set
+# CONFIG_CPU_SUBTYPE_SH7723 is not set
+# CONFIG_CPU_SUBTYPE_SH7763 is not set
 # CONFIG_CPU_SUBTYPE_SH7770 is not set
 # CONFIG_CPU_SUBTYPE_SH7780 is not set
 # CONFIG_CPU_SUBTYPE_SH7785 is not set
 # CONFIG_CPU_SUBTYPE_SHX3 is not set
 # CONFIG_CPU_SUBTYPE_SH7343 is not set
 # CONFIG_CPU_SUBTYPE_SH7722 is not set
+# CONFIG_CPU_SUBTYPE_SH7366 is not set
+# CONFIG_CPU_SUBTYPE_SH5_101 is not set
+# CONFIG_CPU_SUBTYPE_SH5_103 is not set
 
 #
 # Memory management options
@@ -134,6 +166,7 @@ CONFIG_MMU=y
 CONFIG_PAGE_OFFSET=0x80000000
 CONFIG_MEMORY_START=0x0C000000
 CONFIG_MEMORY_SIZE=0x03F00000
+CONFIG_29BIT=y
 CONFIG_VSYSCALL=y
 CONFIG_ARCH_FLATMEM_ENABLE=y
 CONFIG_ARCH_SPARSEMEM_ENABLE=y
@@ -143,7 +176,9 @@ CONFIG_ARCH_POPULATES_NODE_MAP=y
 CONFIG_ARCH_SELECT_MEMORY_MODEL=y
 CONFIG_PAGE_SIZE_4KB=y
 # CONFIG_PAGE_SIZE_8KB is not set
+# CONFIG_PAGE_SIZE_16KB is not set
 # CONFIG_PAGE_SIZE_64KB is not set
+CONFIG_ENTRY_OFFSET=0x00001000
 CONFIG_SELECT_MEMORY_MODEL=y
 CONFIG_FLATMEM_MANUAL=y
 # CONFIG_DISCONTIGMEM_MANUAL is not set
@@ -151,6 +186,8 @@ CONFIG_FLATMEM_MANUAL=y
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 CONFIG_SPARSEMEM_STATIC=y
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_RESOURCES_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
@@ -173,7 +210,6 @@ CONFIG_CPU_LITTLE_ENDIAN=y
 CONFIG_SH_DSP=y
 CONFIG_SH_ADC=y
 CONFIG_CPU_HAS_INTEVT=y
-CONFIG_CPU_HAS_INTC_IRQ=y
 CONFIG_CPU_HAS_SR_RB=y
 CONFIG_CPU_HAS_DSP=y
 
@@ -196,6 +232,7 @@ CONFIG_SH_PCLK_FREQ=24000000
 # CONFIG_TICK_ONESHOT is not set
 # CONFIG_NO_HZ is not set
 # CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
 
 #
 # CPU Frequency scaling
@@ -228,11 +265,14 @@ CONFIG_HZ_250=y
 # CONFIG_HZ_300 is not set
 # CONFIG_HZ_1000 is not set
 CONFIG_HZ=250
+# CONFIG_SCHED_HRTICK is not set
 # CONFIG_KEXEC is not set
 # CONFIG_CRASH_DUMP is not set
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
+CONFIG_GUSA=y
+# CONFIG_GUSA_RB is not set
 
 #
 # Boot options
@@ -245,10 +285,6 @@ CONFIG_BOOT_LINK_OFFSET=0x00800000
 # Bus options
 #
 # CONFIG_ARCH_SUPPORTS_MSI is not set
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
 # CONFIG_PCCARD is not set
 
 #
@@ -289,6 +325,7 @@ CONFIG_IP_PNP_DHCP=y
 # CONFIG_INET_XFRM_MODE_TRANSPORT is not set
 # CONFIG_INET_XFRM_MODE_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
 CONFIG_INET_DIAG=y
 CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
@@ -296,8 +333,6 @@ CONFIG_TCP_CONG_CUBIC=y
 CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
 # CONFIG_NETWORK_SECMARK is not set
 # CONFIG_NETFILTER is not set
 # CONFIG_IP_DCCP is not set
@@ -314,10 +349,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
 # CONFIG_NET_SCHED is not set
 
 #
@@ -325,6 +356,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 #
 # CONFIG_NET_PKTGEN is not set
 # CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
@@ -346,9 +378,12 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 #
 # Generic Driver Options
 #
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 # CONFIG_STANDALONE is not set
 # CONFIG_PREVENT_FIRMWARE_BUILD is not set
 CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_DEBUG_DRIVER is not set
 # CONFIG_DEBUG_DEVRES is not set
 # CONFIG_SYS_HYPERVISOR is not set
@@ -362,6 +397,7 @@ CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
 # CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set
 # CONFIG_MTD_REDBOOT_PARTS_READONLY is not set
 CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_AR7_PARTS is not set
 
 #
 # User Modules And Translation Layers
@@ -374,6 +410,7 @@ CONFIG_MTD_BLOCK=y
 # CONFIG_INFTL is not set
 # CONFIG_RFD_FTL is not set
 # CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
 
 #
 # RAM/ROM/Flash chip drivers
@@ -408,7 +445,6 @@ CONFIG_MTD_PHYSMAP=y
 CONFIG_MTD_PHYSMAP_START=0x0000000
 CONFIG_MTD_PHYSMAP_LEN=0
 CONFIG_MTD_PHYSMAP_BANKWIDTH=0
-# CONFIG_MTD_SOLUTIONENGINE is not set
 # CONFIG_MTD_PLATRAM is not set
 
 #
@@ -440,11 +476,14 @@ CONFIG_BLK_DEV=y
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=65536
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_EEPROM_93CX6 is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
 #
@@ -457,18 +496,24 @@ CONFIG_MISC_DEVICES=y
 # CONFIG_ATA is not set
 # CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
 # CONFIG_EQUALIZER is not set
 # CONFIG_TUN is not set
+# CONFIG_VETH is not set
 # CONFIG_PHYLIB is not set
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
+# CONFIG_AX88796 is not set
 # CONFIG_STNIC is not set
 # CONFIG_SMC91X is not set
 CONFIG_SMC911X=y
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_B44 is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
 
@@ -477,10 +522,10 @@ CONFIG_SMC911X=y
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
 # CONFIG_WAN is not set
 # CONFIG_PPP is not set
 # CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
 # CONFIG_NETCONSOLE is not set
 # CONFIG_NETPOLL is not set
 # CONFIG_NET_POLL_CONTROLLER is not set
@@ -502,7 +547,6 @@ CONFIG_INPUT_MOUSEDEV_PSAUX=y
 CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
 # CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
 CONFIG_INPUT_EVDEV=y
 # CONFIG_INPUT_EVBUG is not set
 
@@ -516,6 +560,7 @@ CONFIG_KEYBOARD_ATKBD=y
 # CONFIG_KEYBOARD_XTKBD is not set
 # CONFIG_KEYBOARD_NEWTON is not set
 # CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_SH_KEYSC is not set
 CONFIG_INPUT_MOUSE=y
 # CONFIG_MOUSE_PS2 is not set
 # CONFIG_MOUSE_SERIAL is not set
@@ -539,9 +584,11 @@ CONFIG_SERIO_LIBPS2=y
 # Character devices
 #
 CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
 # CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
 # CONFIG_SERIAL_NONSTANDARD is not set
 
 #
@@ -569,60 +616,72 @@ CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_IPMI_HANDLER is not set
-# CONFIG_WATCHDOG is not set
 # CONFIG_HW_RANDOM is not set
 # CONFIG_R3964 is not set
 # CONFIG_RAW_DRIVER is not set
 # CONFIG_TCG_TPM is not set
 # CONFIG_I2C is not set
-
-#
-# SPI support
-#
 # CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+# CONFIG_WATCHDOG is not set
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
 
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
 
 #
 # Multimedia devices
 #
+
+#
+# Multimedia core support
+#
 # CONFIG_VIDEO_DEV is not set
 # CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
 CONFIG_DAB=y
 
 #
 # Graphics support
 #
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
 # CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
 # Display device support
 #
 # CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
 
 #
 # Console display driver support
 #
 CONFIG_DUMMY_CONSOLE=y
-
-#
-# Sound
-#
 # CONFIG_SOUND is not set
 # CONFIG_HID_SUPPORT is not set
 # CONFIG_USB_SUPPORT is not set
 # CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
 CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
 # CONFIG_RTC_HCTOSYS is not set
@@ -644,9 +703,10 @@ CONFIG_RTC_INTF_DEV=y
 #
 # Platform RTC drivers
 #
+# CONFIG_RTC_DRV_DS1511 is not set
 # CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
 # CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
 # CONFIG_RTC_DRV_M48T86 is not set
 # CONFIG_RTC_DRV_M48T59 is not set
 # CONFIG_RTC_DRV_V3020 is not set
@@ -655,23 +715,7 @@ CONFIG_RTC_INTF_DEV=y
 # on-CPU RTC drivers
 #
 CONFIG_RTC_DRV_SH=y
-
-#
-# DMA Engine support
-#
-# CONFIG_DMA_ENGINE is not set
-
-#
-# DMA Clients
-#
-
-#
-# DMA Devices
-#
-
-#
-# Userspace I/O
-#
+# CONFIG_DMADEVICES is not set
 # CONFIG_UIO is not set
 
 #
@@ -684,18 +728,14 @@ CONFIG_EXT3_FS=y
 # CONFIG_EXT3_FS_XATTR is not set
 # CONFIG_EXT4DEV_FS is not set
 CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
 # CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
+# CONFIG_DNOTIFY is not set
 # CONFIG_INOTIFY is not set
 # CONFIG_QUOTA is not set
-# CONFIG_DNOTIFY is not set
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
 # CONFIG_FUSE_FS is not set
@@ -724,7 +764,6 @@ CONFIG_TMPFS=y
 # CONFIG_TMPFS_POSIX_ACL is not set
 # CONFIG_HUGETLBFS is not set
 # CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
 # CONFIG_CONFIGFS_FS is not set
 
 #
@@ -744,30 +783,29 @@ CONFIG_JFFS2_FS_DEBUG=0
 # CONFIG_JFFS2_FS_XATTR is not set
 # CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
 CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
 CONFIG_JFFS2_RTIME=y
 # CONFIG_JFFS2_RUBIN is not set
 # CONFIG_CRAMFS is not set
 # CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
+CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 # CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
-CONFIG_SUNRPC_BIND34=y
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -781,10 +819,6 @@ CONFIG_SUNRPC_BIND34=y
 #
 # CONFIG_PARTITION_ADVANCED is not set
 CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
 CONFIG_NLS=y
 CONFIG_NLS_DEFAULT="cp437"
 CONFIG_NLS_CODEPAGE_437=y
@@ -825,23 +859,16 @@ CONFIG_NLS_ISO8859_1=y
 # CONFIG_NLS_KOI8_R is not set
 # CONFIG_NLS_KOI8_U is not set
 # CONFIG_NLS_UTF8 is not set
-
-#
-# Distributed Lock Manager
-#
 # CONFIG_DLM is not set
 
 #
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
 # Kernel hacking
 #
 CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 # CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
 # CONFIG_UNUSED_SYMBOLS is not set
 # CONFIG_DEBUG_FS is not set
@@ -852,6 +879,7 @@ CONFIG_DEBUG_KERNEL=y
 # CONFIG_SCHED_DEBUG is not set
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
 # CONFIG_DEBUG_SLAB is not set
 # CONFIG_DEBUG_RT_MUTEXES is not set
 # CONFIG_RT_MUTEX_TESTER is not set
@@ -866,11 +894,16 @@ CONFIG_DEBUG_KOBJECT=y
 CONFIG_DEBUG_BUGVERBOSE=y
 CONFIG_DEBUG_INFO=y
 # CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
 CONFIG_FRAME_POINTER=y
-# CONFIG_FORCED_INLINING is not set
+# CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_FAULT_INJECTION is not set
+# CONFIG_SAMPLES is not set
 # CONFIG_SH_STANDARD_BIOS is not set
 CONFIG_EARLY_SCIF_CONSOLE=y
 CONFIG_EARLY_SCIF_CONSOLE_PORT=0xa4430000
@@ -879,6 +912,7 @@ CONFIG_EARLY_PRINTK=y
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
 # CONFIG_4KSTACKS is not set
+# CONFIG_IRQSTACKS is not set
 CONFIG_SH_KGDB=y
 
 #
@@ -904,14 +938,17 @@ CONFIG_KGDB_DEFBITS_8=y
 #
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
 # CONFIG_CRYPTO is not set
 
 #
 # Library routines
 #
 CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
 CONFIG_CRC_CCITT=m
 CONFIG_CRC16=m
+# CONFIG_CRC_T10DIF is not set
 # CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
diff --git a/arch/sh/configs/microdev_defconfig b/arch/sh/configs/microdev_defconfig
index e89d951c3c16..e4b900e72dcd 100644
--- a/arch/sh/configs/microdev_defconfig
+++ b/arch/sh/configs/microdev_defconfig
@@ -1,28 +1,35 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.18
-# Tue Oct  3 11:27:01 2006
+# Linux kernel version: 2.6.26
+# Wed Jul 30 01:47:16 2008
 #
 CONFIG_SUPERH=y
+CONFIG_SUPERH32=y
+CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig"
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_BUG=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_IRQ_PROBE=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_ARCH_NO_VIRT_TO_BUS=y
+CONFIG_ARCH_SUPPORTS_AOUT=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
-# Code maturity level options
+# General setup
 #
 CONFIG_EXPERIMENTAL=y
 CONFIG_BROKEN_ON_SMP=y
 CONFIG_LOCK_KERNEL=y
 CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
 CONFIG_LOCALVERSION=""
 CONFIG_LOCALVERSION_AUTO=y
 CONFIG_SWAP=y
@@ -31,10 +38,16 @@ CONFIG_SWAP=y
 CONFIG_BSD_PROCESS_ACCT=y
 # CONFIG_BSD_PROCESS_ACCT_V3 is not set
 # CONFIG_TASKSTATS is not set
-# CONFIG_UTS_NS is not set
 # CONFIG_AUDIT is not set
 # CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+# CONFIG_GROUP_SCHED is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
+CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
@@ -47,29 +60,42 @@ CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
-CONFIG_SLAB=y
 CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
+# CONFIG_HAVE_IOREMAP_PROT is not set
+# CONFIG_HAVE_KPROBES is not set
+# CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_ARCH_TRACEHOOK is not set
+# CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+CONFIG_HAVE_CLK=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
-# CONFIG_SLOB is not set
-
-#
-# Loadable module support
-#
 # CONFIG_MODULES is not set
-
-#
-# Block layer
-#
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -83,59 +109,26 @@ CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_CFQ is not set
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_CLASSIC_RCU=y
 
 #
 # System type
 #
-# CONFIG_SH_SOLUTION_ENGINE is not set
-# CONFIG_SH_7751_SOLUTION_ENGINE is not set
-# CONFIG_SH_7300_SOLUTION_ENGINE is not set
-# CONFIG_SH_7343_SOLUTION_ENGINE is not set
-# CONFIG_SH_73180_SOLUTION_ENGINE is not set
-# CONFIG_SH_7751_SYSTEMH is not set
-# CONFIG_SH_HP6XX is not set
-# CONFIG_SH_EC3104 is not set
-# CONFIG_SH_SATURN is not set
-# CONFIG_SH_DREAMCAST is not set
-# CONFIG_SH_BIGSUR is not set
-# CONFIG_SH_MPC1211 is not set
-# CONFIG_SH_SH03 is not set
-# CONFIG_SH_SECUREEDGE5410 is not set
-# CONFIG_SH_HS7751RVOIP is not set
-# CONFIG_SH_7710VOIPGW is not set
-# CONFIG_SH_RTS7751R2D is not set
-# CONFIG_SH_R7780RP is not set
-# CONFIG_SH_EDOSK7705 is not set
-CONFIG_SH_SH4202_MICRODEV=y
-# CONFIG_SH_LANDISK is not set
-# CONFIG_SH_TITAN is not set
-# CONFIG_SH_SHMIN is not set
-# CONFIG_SH_UNKNOWN is not set
-
-#
-# Processor selection
-#
 CONFIG_CPU_SH4=y
-
-#
-# SH-2 Processor Support
-#
-# CONFIG_CPU_SUBTYPE_SH7604 is not set
-
-#
-# SH-3 Processor Support
-#
-# CONFIG_CPU_SUBTYPE_SH7300 is not set
+# CONFIG_CPU_SUBTYPE_SH7619 is not set
+# CONFIG_CPU_SUBTYPE_SH7203 is not set
+# CONFIG_CPU_SUBTYPE_SH7206 is not set
+# CONFIG_CPU_SUBTYPE_SH7263 is not set
+# CONFIG_CPU_SUBTYPE_MXG is not set
 # CONFIG_CPU_SUBTYPE_SH7705 is not set
 # CONFIG_CPU_SUBTYPE_SH7706 is not set
 # CONFIG_CPU_SUBTYPE_SH7707 is not set
 # CONFIG_CPU_SUBTYPE_SH7708 is not set
 # CONFIG_CPU_SUBTYPE_SH7709 is not set
 # CONFIG_CPU_SUBTYPE_SH7710 is not set
-
-#
-# SH-4 Processor Support
-#
+# CONFIG_CPU_SUBTYPE_SH7712 is not set
+# CONFIG_CPU_SUBTYPE_SH7720 is not set
+# CONFIG_CPU_SUBTYPE_SH7721 is not set
 # CONFIG_CPU_SUBTYPE_SH7750 is not set
 # CONFIG_CPU_SUBTYPE_SH7091 is not set
 # CONFIG_CPU_SUBTYPE_SH7750R is not set
@@ -144,67 +137,94 @@ CONFIG_CPU_SH4=y
 # CONFIG_CPU_SUBTYPE_SH7751R is not set
 # CONFIG_CPU_SUBTYPE_SH7760 is not set
 CONFIG_CPU_SUBTYPE_SH4_202=y
-
-#
-# ST40 Processor Support
-#
-# CONFIG_CPU_SUBTYPE_ST40STB1 is not set
-# CONFIG_CPU_SUBTYPE_ST40GX1 is not set
-
-#
-# SH-4A Processor Support
-#
+# CONFIG_CPU_SUBTYPE_SH7723 is not set
+# CONFIG_CPU_SUBTYPE_SH7763 is not set
 # CONFIG_CPU_SUBTYPE_SH7770 is not set
 # CONFIG_CPU_SUBTYPE_SH7780 is not set
-
-#
-# SH4AL-DSP Processor Support
-#
-# CONFIG_CPU_SUBTYPE_SH73180 is not set
+# CONFIG_CPU_SUBTYPE_SH7785 is not set
+# CONFIG_CPU_SUBTYPE_SHX3 is not set
 # CONFIG_CPU_SUBTYPE_SH7343 is not set
+# CONFIG_CPU_SUBTYPE_SH7722 is not set
+# CONFIG_CPU_SUBTYPE_SH7366 is not set
+# CONFIG_CPU_SUBTYPE_SH5_101 is not set
+# CONFIG_CPU_SUBTYPE_SH5_103 is not set
 
 #
 # Memory management options
 #
+CONFIG_QUICKLIST=y
 CONFIG_MMU=y
 CONFIG_PAGE_OFFSET=0x80000000
 CONFIG_MEMORY_START=0x08000000
 CONFIG_MEMORY_SIZE=0x04000000
+CONFIG_29BIT=y
 CONFIG_VSYSCALL=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_SPARSEMEM_ENABLE=y
+CONFIG_ARCH_SPARSEMEM_DEFAULT=y
+CONFIG_MAX_ACTIVE_REGIONS=1
+CONFIG_ARCH_POPULATES_NODE_MAP=y
+CONFIG_ARCH_SELECT_MEMORY_MODEL=y
+CONFIG_PAGE_SIZE_4KB=y
+# CONFIG_PAGE_SIZE_8KB is not set
+# CONFIG_PAGE_SIZE_16KB is not set
+# CONFIG_PAGE_SIZE_64KB is not set
+CONFIG_ENTRY_OFFSET=0x00001000
 CONFIG_HUGETLB_PAGE_SIZE_64K=y
+# CONFIG_HUGETLB_PAGE_SIZE_256K is not set
 # CONFIG_HUGETLB_PAGE_SIZE_1MB is not set
+# CONFIG_HUGETLB_PAGE_SIZE_4MB is not set
+# CONFIG_HUGETLB_PAGE_SIZE_64MB is not set
+# CONFIG_HUGETLB_PAGE_SIZE_512MB is not set
 CONFIG_SELECT_MEMORY_MODEL=y
 CONFIG_FLATMEM_MANUAL=y
 # CONFIG_DISCONTIGMEM_MANUAL is not set
 # CONFIG_SPARSEMEM_MANUAL is not set
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPARSEMEM_STATIC=y
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_NR_QUICK=2
 
 #
 # Cache configuration
 #
 # CONFIG_SH_DIRECT_MAPPED is not set
-CONFIG_SH_WRITETHROUGH=y
-# CONFIG_SH_OCRAM is not set
+CONFIG_CACHE_WRITEBACK=y
+# CONFIG_CACHE_WRITETHROUGH is not set
+# CONFIG_CACHE_OFF is not set
 
 #
 # Processor features
 #
 CONFIG_CPU_LITTLE_ENDIAN=y
+# CONFIG_CPU_BIG_ENDIAN is not set
 CONFIG_SH_FPU=y
-# CONFIG_SH_DSP is not set
 # CONFIG_SH_STORE_QUEUES is not set
 CONFIG_CPU_HAS_INTEVT=y
 CONFIG_CPU_HAS_SR_RB=y
+CONFIG_CPU_HAS_PTEA=y
+CONFIG_CPU_HAS_FPU=y
 
 #
-# Timer support
+# Board support
+#
+CONFIG_SH_SH4202_MICRODEV=y
+
+#
+# Timer and clock configuration
 #
 CONFIG_SH_TMU=y
+CONFIG_SH_TIMER_IRQ=16
 CONFIG_SH_PCLK_FREQ=66000000
+# CONFIG_TICK_ONESHOT is not set
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
 
 #
 # CPU Frequency scaling
@@ -214,6 +234,7 @@ CONFIG_SH_PCLK_FREQ=66000000
 #
 # DMA support
 #
+CONFIG_SH_DMA_API=y
 CONFIG_SH_DMA=y
 CONFIG_NR_ONCHIP_DMA_CHANNELS=4
 # CONFIG_NR_DMA_CHANNELS_BOOL is not set
@@ -221,22 +242,30 @@ CONFIG_NR_ONCHIP_DMA_CHANNELS=4
 #
 # Companion Chips
 #
-# CONFIG_HD6446X_SERIES is not set
+
+#
+# Additional SuperH Device Drivers
+#
 CONFIG_HEARTBEAT=y
+# CONFIG_PUSH_SWITCH is not set
 
 #
 # Kernel features
 #
 # CONFIG_HZ_100 is not set
 CONFIG_HZ_250=y
+# CONFIG_HZ_300 is not set
 # CONFIG_HZ_1000 is not set
 CONFIG_HZ=250
+# CONFIG_SCHED_HRTICK is not set
 # CONFIG_KEXEC is not set
-# CONFIG_SMP is not set
+# CONFIG_CRASH_DUMP is not set
 # CONFIG_PREEMPT_NONE is not set
 # CONFIG_PREEMPT_VOLUNTARY is not set
 CONFIG_PREEMPT=y
-CONFIG_PREEMPT_BKL=y
+# CONFIG_PREEMPT_RCU is not set
+CONFIG_GUSA=y
+# CONFIG_GUSA_RB is not set
 
 #
 # Boot options
@@ -251,30 +280,16 @@ CONFIG_CMDLINE="console=ttySC0,115200 root=/dev/hda1"
 # Bus options
 #
 CONFIG_SUPERHYWAY=y
-# CONFIG_PCI is not set
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
+# CONFIG_ARCH_SUPPORTS_MSI is not set
 # CONFIG_PCCARD is not set
 
 #
-# PCI Hotplug Support
-#
-
-#
 # Executable file formats
 #
 CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_FLAT is not set
 # CONFIG_BINFMT_MISC is not set
 
 #
-# Power management options (EXPERIMENTAL)
-#
-# CONFIG_PM is not set
-
-#
 # Networking
 #
 CONFIG_NET=y
@@ -282,12 +297,13 @@ CONFIG_NET=y
 #
 # Networking options
 #
-# CONFIG_NETDEBUG is not set
 # CONFIG_PACKET is not set
 # CONFIG_UNIX is not set
 CONFIG_XFRM=y
 # CONFIG_XFRM_USER is not set
 # CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
 # CONFIG_NET_KEY is not set
 CONFIG_INET=y
 # CONFIG_IP_MULTICAST is not set
@@ -308,30 +324,19 @@ CONFIG_IP_PNP=y
 # CONFIG_INET_TUNNEL is not set
 CONFIG_INET_XFRM_MODE_TRANSPORT=y
 CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
 CONFIG_INET_DIAG=y
 CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
 CONFIG_TCP_CONG_CUBIC=y
 CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
 # CONFIG_NETWORK_SECMARK is not set
 # CONFIG_NETFILTER is not set
-
-#
-# DCCP Configuration (EXPERIMENTAL)
-#
 # CONFIG_IP_DCCP is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
 # CONFIG_IP_SCTP is not set
-
-#
-# TIPC Configuration (EXPERIMENTAL)
-#
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
@@ -344,10 +349,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
 # CONFIG_NET_SCHED is not set
 
 #
@@ -355,9 +356,20 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 #
 # CONFIG_NET_PKTGEN is not set
 # CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
 # CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
 
 #
 # Device Drivers
@@ -366,159 +378,96 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 #
 # Generic Driver Options
 #
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_FW_LOADER is not set
 # CONFIG_SYS_HYPERVISOR is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
 # CONFIG_CONNECTOR is not set
-
-#
-# Memory Technology Devices (MTD)
-#
 # CONFIG_MTD is not set
-
-#
-# Parallel port support
-#
 # CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
+CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_COW_COMMON is not set
 # CONFIG_BLK_DEV_LOOP is not set
 # CONFIG_BLK_DEV_NBD is not set
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
-CONFIG_BLK_DEV_INITRD=y
+# CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
+# CONFIG_BLK_DEV_HD is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+CONFIG_HAVE_IDE=y
 CONFIG_IDE=y
 CONFIG_IDE_MAX_HWIFS=1
 CONFIG_BLK_DEV_IDE=y
 
 #
-# Please see Documentation/ide.txt for help/info on IDE drives
+# Please see Documentation/ide/ide.txt for help/info on IDE drives
 #
 # CONFIG_BLK_DEV_IDE_SATA is not set
 CONFIG_BLK_DEV_IDEDISK=y
 # CONFIG_IDEDISK_MULTI_MODE is not set
 CONFIG_BLK_DEV_IDECD=y
+CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y
 # CONFIG_BLK_DEV_IDETAPE is not set
 # CONFIG_BLK_DEV_IDEFLOPPY is not set
 # CONFIG_IDE_TASK_IOCTL is not set
+CONFIG_IDE_PROC_FS=y
 
 #
 # IDE chipset support/bugfixes
 #
-CONFIG_IDE_GENERIC=y
-# CONFIG_IDE_ARM is not set
+# CONFIG_BLK_DEV_PLATFORM is not set
 # CONFIG_BLK_DEV_IDEDMA is not set
-# CONFIG_IDEDMA_AUTO is not set
-# CONFIG_BLK_DEV_HD is not set
 
 #
 # SCSI device support
 #
 # CONFIG_RAID_ATTRS is not set
 # CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
 # CONFIG_SCSI_NETLINK is not set
-
-#
-# Serial ATA (prod) and Parallel ATA (experimental) drivers
-#
 # CONFIG_ATA is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
 # CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
-#
-# Network device support
-#
 CONFIG_NETDEVICES=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
 # CONFIG_EQUALIZER is not set
 # CONFIG_TUN is not set
-
-#
-# PHY device support
-#
+# CONFIG_VETH is not set
 # CONFIG_PHYLIB is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
+# CONFIG_AX88796 is not set
 # CONFIG_STNIC is not set
 CONFIG_SMC91X=y
+# CONFIG_SMC911X is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_B44 is not set
+CONFIG_NETDEV_1000=y
+CONFIG_NETDEV_10000=y
 
 #
-# Ethernet (1000 Mbit)
-#
-
-#
-# Ethernet (10000 Mbit)
-#
-
-#
-# Token Ring devices
-#
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Wan interfaces
+# Wireless LAN
 #
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
 # CONFIG_WAN is not set
 # CONFIG_PPP is not set
 # CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
 # CONFIG_NETCONSOLE is not set
 # CONFIG_NETPOLL is not set
 # CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
 # CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
 # CONFIG_PHONE is not set
 
 #
@@ -536,6 +485,7 @@ CONFIG_SMC91X=y
 # Character devices
 #
 # CONFIG_VT is not set
+CONFIG_DEVKMEM=y
 # CONFIG_SERIAL_NONSTANDARD is not set
 
 #
@@ -554,143 +504,93 @@ CONFIG_SERIAL_CORE_CONSOLE=y
 CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
 # CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
 CONFIG_HW_RANDOM=y
-# CONFIG_GEN_RTC is not set
-# CONFIG_DTLK is not set
 # CONFIG_R3964 is not set
-
-#
-# Ftape, the floppy tape device driver
-#
 # CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
 # CONFIG_TCG_TPM is not set
-# CONFIG_TELCLOCK is not set
-
-#
-# I2C support
-#
 # CONFIG_I2C is not set
-
-#
-# SPI support
-#
 # CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
-
-#
-# Dallas's 1-wire bus
-#
-
-#
-# Hardware Monitoring support
-#
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
 CONFIG_HWMON=y
 # CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_ABITUGURU is not set
 # CONFIG_SENSORS_F71805F is not set
+# CONFIG_SENSORS_F71882FG is not set
+# CONFIG_SENSORS_IT87 is not set
+# CONFIG_SENSORS_PC87360 is not set
+# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_SMSC47M1 is not set
+# CONFIG_SENSORS_SMSC47B397 is not set
 # CONFIG_SENSORS_VT1211 is not set
+# CONFIG_SENSORS_W83627HF is not set
+# CONFIG_SENSORS_W83627EHF is not set
 # CONFIG_HWMON_DEBUG_CHIP is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+# CONFIG_WATCHDOG is not set
 
 #
-# Misc devices
+# Sonics Silicon Backplane
 #
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
 
 #
 # Multimedia devices
 #
+
+#
+# Multimedia core support
+#
 # CONFIG_VIDEO_DEV is not set
-CONFIG_VIDEO_V4L2=y
+# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
 
 #
-# Digital Video Broadcasting Devices
+# Multimedia drivers
 #
-# CONFIG_DVB is not set
+# CONFIG_DAB is not set
 
 #
 # Graphics support
 #
-CONFIG_FIRMWARE_EDID=y
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
 # CONFIG_FB is not set
 # CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
-# Sound
+# Display device support
 #
+# CONFIG_DISPLAY_SUPPORT is not set
 # CONFIG_SOUND is not set
-
-#
-# USB support
-#
-# CONFIG_USB_ARCH_HAS_HCD is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
 # CONFIG_USB_ARCH_HAS_OHCI is not set
 # CONFIG_USB_ARCH_HAS_EHCI is not set
+# CONFIG_USB is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
 
 #
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
 #
-
-#
-# USB Gadget Support
-#
 # CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
 # CONFIG_MMC is not set
-
-#
-# LED devices
-#
+# CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
-
-#
-# LED drivers
-#
-
-#
-# LED Triggers
-#
-
-#
-# InfiniBand support
-#
-
-#
-# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
-#
-
-#
-# Real Time Clock
-#
+# CONFIG_ACCESSIBILITY is not set
 # CONFIG_RTC_CLASS is not set
-
-#
-# DMA Engine support
-#
-# CONFIG_DMA_ENGINE is not set
-
-#
-# DMA Clients
-#
-
-#
-# DMA Devices
-#
+# CONFIG_DMADEVICES is not set
+# CONFIG_UIO is not set
 
 #
 # File systems
@@ -702,20 +602,18 @@ CONFIG_EXT3_FS=y
 CONFIG_EXT3_FS_XATTR=y
 # CONFIG_EXT3_FS_POSIX_ACL is not set
 # CONFIG_EXT3_FS_SECURITY is not set
+# CONFIG_EXT4DEV_FS is not set
 CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
 CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
 # CONFIG_XFS_FS is not set
 # CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
+CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
 # CONFIG_FUSE_FS is not set
@@ -747,7 +645,6 @@ CONFIG_TMPFS=y
 # CONFIG_TMPFS_POSIX_ACL is not set
 CONFIG_HUGETLBFS=y
 CONFIG_HUGETLB_PAGE=y
-CONFIG_RAMFS=y
 # CONFIG_CONFIGFS_FS is not set
 
 #
@@ -762,21 +659,20 @@ CONFIG_RAMFS=y
 # CONFIG_EFS_FS is not set
 # CONFIG_CRAMFS is not set
 # CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
+CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_NFS_COMMON=y
@@ -789,17 +685,12 @@ CONFIG_RPCSEC_GSS_KRB5=y
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
 # CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
 
 #
 # Partition Types
 #
 # CONFIG_PARTITION_ADVANCED is not set
 CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
 CONFIG_NLS=y
 CONFIG_NLS_DEFAULT="iso8859-1"
 # CONFIG_NLS_CODEPAGE_437 is not set
@@ -840,76 +731,127 @@ CONFIG_NLS_DEFAULT="iso8859-1"
 # CONFIG_NLS_KOI8_R is not set
 # CONFIG_NLS_KOI8_U is not set
 # CONFIG_NLS_UTF8 is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
+# CONFIG_DLM is not set
 
 #
 # Kernel hacking
 #
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 # CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
 # CONFIG_MAGIC_SYSRQ is not set
 # CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
-CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_DEBUG_BUGVERBOSE is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_UNWIND_INFO is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_SAMPLES is not set
 # CONFIG_SH_STANDARD_BIOS is not set
 # CONFIG_EARLY_SCIF_CONSOLE is not set
-# CONFIG_KGDB is not set
+# CONFIG_SH_KGDB is not set
 
 #
 # Security options
 #
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
 
 #
-# Cryptographic options
+# Crypto core or helper
 #
-CONFIG_CRYPTO=y
 CONFIG_CRYPTO_ALGAPI=y
 CONFIG_CRYPTO_BLKCIPHER=y
 CONFIG_CRYPTO_MANAGER=y
-# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_GF128MUL is not set
 # CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=y
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
 # CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
 # CONFIG_CRYPTO_SHA1 is not set
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
 # CONFIG_CRYPTO_TGR192 is not set
-CONFIG_CRYPTO_ECB=y
-CONFIG_CRYPTO_CBC=y
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
 # CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
 # CONFIG_CRYPTO_CAST5 is not set
 # CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
 # CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
 
 #
-# Hardware crypto devices
+# Compression
 #
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_LZO is not set
+CONFIG_CRYPTO_HW=y
 
 #
 # Library routines
 #
+CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
+# CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
 # CONFIG_LIBCRC32C is not set
 CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
diff --git a/arch/sh/configs/migor_defconfig b/arch/sh/configs/migor_defconfig
index 287408b2ace6..c4b3e1d8950d 100644
--- a/arch/sh/configs/migor_defconfig
+++ b/arch/sh/configs/migor_defconfig
@@ -1,10 +1,11 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc3
-# Thu May 22 14:30:07 2008
+# Linux kernel version: 2.6.26
+# Wed Jul 30 01:44:41 2008
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
+CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig"
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
 CONFIG_GENERIC_BUG=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
@@ -77,9 +78,14 @@ CONFIG_PROFILING=y
 # CONFIG_MARKERS is not set
 CONFIG_OPROFILE=y
 CONFIG_HAVE_OPROFILE=y
+# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
+# CONFIG_HAVE_IOREMAP_PROT is not set
 # CONFIG_HAVE_KPROBES is not set
 # CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_ARCH_TRACEHOOK is not set
 # CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+CONFIG_HAVE_CLK=y
 CONFIG_PROC_PAGE_MONITOR=y
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
@@ -90,12 +96,13 @@ CONFIG_MODULES=y
 # CONFIG_MODULE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-# CONFIG_KMOD is not set
+CONFIG_KMOD=y
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -173,7 +180,9 @@ CONFIG_ARCH_SELECT_MEMORY_MODEL=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_PAGE_SIZE_4KB=y
 # CONFIG_PAGE_SIZE_8KB is not set
+# CONFIG_PAGE_SIZE_16KB is not set
 # CONFIG_PAGE_SIZE_64KB is not set
+CONFIG_ENTRY_OFFSET=0x00001000
 CONFIG_SELECT_MEMORY_MODEL=y
 # CONFIG_FLATMEM_MANUAL is not set
 # CONFIG_DISCONTIGMEM_MANUAL is not set
@@ -216,6 +225,8 @@ CONFIG_CPU_HAS_DSP=y
 #
 # CONFIG_SH_7722_SOLUTION_ENGINE is not set
 CONFIG_SH_MIGOR=y
+CONFIG_SH_MIGOR_QVGA=y
+# CONFIG_SH_MIGOR_RTA_WVGA is not set
 
 #
 # Timer and clock configuration
@@ -362,6 +373,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 #
 # CONFIG_CFG80211 is not set
 CONFIG_WIRELESS_EXT=y
+CONFIG_WIRELESS_EXT_SYSFS=y
 # CONFIG_MAC80211 is not set
 # CONFIG_IEEE80211 is not set
 # CONFIG_RFKILL is not set
@@ -378,6 +390,8 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=m
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_SYS_HYPERVISOR is not set
 # CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
@@ -475,6 +489,7 @@ CONFIG_BLK_DEV_RAM_SIZE=4096
 # CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
@@ -521,10 +536,10 @@ CONFIG_SCSI_WAIT_SCAN=m
 CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_ISCSI_TCP is not set
 # CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_DH is not set
 # CONFIG_ATA is not set
 # CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -537,6 +552,7 @@ CONFIG_MII=y
 # CONFIG_AX88796 is not set
 # CONFIG_STNIC is not set
 CONFIG_SMC91X=y
+# CONFIG_SMC911X is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
 # CONFIG_IBM_NEW_EMAC_RGMII is not set
 # CONFIG_IBM_NEW_EMAC_TAH is not set
@@ -602,6 +618,7 @@ CONFIG_KEYBOARD_SH_KEYSC=y
 # Character devices
 #
 CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
 CONFIG_VT_HW_CONSOLE_BINDING=y
@@ -636,21 +653,35 @@ CONFIG_I2C_BOARDINFO=y
 #
 # I2C Hardware Bus support
 #
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
 # CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
+CONFIG_I2C_SH_MOBILE=y
 # CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
 # CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_STUB is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
 # CONFIG_I2C_PCA_PLATFORM is not set
-CONFIG_I2C_SH_MOBILE=y
+# CONFIG_I2C_STUB is not set
 
 #
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
+# CONFIG_AT24 is not set
 # CONFIG_SENSORS_EEPROM is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
@@ -663,6 +694,7 @@ CONFIG_I2C_SH_MOBILE=y
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 # CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
 
 #
@@ -674,6 +706,7 @@ CONFIG_SSB_POSSIBLE=y
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
 
@@ -710,10 +743,6 @@ CONFIG_SSB_POSSIBLE=y
 # Console display driver support
 #
 CONFIG_DUMMY_CONSOLE=y
-
-#
-# Sound
-#
 # CONFIG_SOUND is not set
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
@@ -738,7 +767,7 @@ CONFIG_USB_GADGET_SELECTED=y
 # CONFIG_USB_GADGET_ATMEL_USBA is not set
 # CONFIG_USB_GADGET_FSL_USB2 is not set
 # CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_PXA2XX is not set
+# CONFIG_USB_GADGET_PXA25X is not set
 CONFIG_USB_GADGET_M66592=y
 CONFIG_USB_M66592=y
 CONFIG_SUPERH_BUILT_IN_M66592=y
@@ -757,6 +786,7 @@ CONFIG_USB_GADGET_DUALSPEED=y
 CONFIG_USB_G_SERIAL=y
 # CONFIG_USB_MIDI_GADGET is not set
 # CONFIG_USB_G_PRINTER is not set
+# CONFIG_USB_CDC_COMPOSITE is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
@@ -790,6 +820,7 @@ CONFIG_RTC_DRV_RS5C372=y
 # CONFIG_RTC_DRV_PCF8583 is not set
 # CONFIG_RTC_DRV_M41T80 is not set
 # CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
 
 #
 # SPI RTC drivers
@@ -810,6 +841,7 @@ CONFIG_RTC_DRV_RS5C372=y
 # on-CPU RTC drivers
 #
 CONFIG_RTC_DRV_SH=y
+# CONFIG_DMADEVICES is not set
 # CONFIG_UIO is not set
 
 #
@@ -870,6 +902,7 @@ CONFIG_TMPFS=y
 # CONFIG_CRAMFS is not set
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
 # CONFIG_ROMFS_FS is not set
@@ -899,6 +932,7 @@ CONFIG_DEBUG_FS=y
 # CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_SAMPLES is not set
 # CONFIG_SH_STANDARD_BIOS is not set
 CONFIG_EARLY_SCIF_CONSOLE=y
@@ -955,6 +989,10 @@ CONFIG_CRYPTO=y
 # CONFIG_CRYPTO_MD4 is not set
 # CONFIG_CRYPTO_MD5 is not set
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
 # CONFIG_CRYPTO_SHA1 is not set
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
@@ -994,6 +1032,7 @@ CONFIG_BITREVERSE=y
 # CONFIG_GENERIC_FIND_FIRST_BIT is not set
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
+CONFIG_CRC_T10DIF=y
 # CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
diff --git a/arch/sh/configs/r7780mp_defconfig b/arch/sh/configs/r7780mp_defconfig
index 1a072615ffd4..57a300797584 100644
--- a/arch/sh/configs/r7780mp_defconfig
+++ b/arch/sh/configs/r7780mp_defconfig
@@ -1,10 +1,11 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.25-rc4
-# Thu Mar  6 15:39:59 2008
+# Linux kernel version: 2.6.26
+# Wed Jul 30 01:51:13 2008
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
+CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig"
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
 CONFIG_GENERIC_BUG=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
@@ -84,13 +85,20 @@ CONFIG_PROFILING=y
 # CONFIG_MARKERS is not set
 CONFIG_OPROFILE=m
 CONFIG_HAVE_OPROFILE=y
+# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
+# CONFIG_HAVE_IOREMAP_PROT is not set
 # CONFIG_HAVE_KPROBES is not set
 # CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_ARCH_TRACEHOOK is not set
+# CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+CONFIG_HAVE_CLK=y
 CONFIG_PROC_PAGE_MONITOR=y
 CONFIG_SLABINFO=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
@@ -101,6 +109,7 @@ CONFIG_BLOCK=y
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -115,7 +124,6 @@ CONFIG_IOSCHED_NOOP=y
 CONFIG_DEFAULT_NOOP=y
 CONFIG_DEFAULT_IOSCHED="noop"
 CONFIG_CLASSIC_RCU=y
-# CONFIG_PREEMPT_RCU is not set
 
 #
 # System type
@@ -126,6 +134,7 @@ CONFIG_CPU_SH4A=y
 # CONFIG_CPU_SUBTYPE_SH7203 is not set
 # CONFIG_CPU_SUBTYPE_SH7206 is not set
 # CONFIG_CPU_SUBTYPE_SH7263 is not set
+# CONFIG_CPU_SUBTYPE_MXG is not set
 # CONFIG_CPU_SUBTYPE_SH7705 is not set
 # CONFIG_CPU_SUBTYPE_SH7706 is not set
 # CONFIG_CPU_SUBTYPE_SH7707 is not set
@@ -143,6 +152,7 @@ CONFIG_CPU_SH4A=y
 # CONFIG_CPU_SUBTYPE_SH7751R is not set
 # CONFIG_CPU_SUBTYPE_SH7760 is not set
 # CONFIG_CPU_SUBTYPE_SH4_202 is not set
+# CONFIG_CPU_SUBTYPE_SH7723 is not set
 # CONFIG_CPU_SUBTYPE_SH7763 is not set
 # CONFIG_CPU_SUBTYPE_SH7770 is not set
 CONFIG_CPU_SUBTYPE_SH7780=y
@@ -173,7 +183,9 @@ CONFIG_ARCH_POPULATES_NODE_MAP=y
 CONFIG_ARCH_SELECT_MEMORY_MODEL=y
 CONFIG_PAGE_SIZE_4KB=y
 # CONFIG_PAGE_SIZE_8KB is not set
+# CONFIG_PAGE_SIZE_16KB is not set
 # CONFIG_PAGE_SIZE_64KB is not set
+CONFIG_ENTRY_OFFSET=0x00001000
 CONFIG_HUGETLB_PAGE_SIZE_64K=y
 # CONFIG_HUGETLB_PAGE_SIZE_256K is not set
 # CONFIG_HUGETLB_PAGE_SIZE_1MB is not set
@@ -188,6 +200,7 @@ CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 CONFIG_SPARSEMEM_STATIC=y
 # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_RESOURCES_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
@@ -268,7 +281,7 @@ CONFIG_KEXEC=y
 # CONFIG_PREEMPT_NONE is not set
 # CONFIG_PREEMPT_VOLUNTARY is not set
 CONFIG_PREEMPT=y
-CONFIG_RCU_TRACE=y
+# CONFIG_PREEMPT_RCU is not set
 CONFIG_GUSA=y
 
 #
@@ -348,14 +361,13 @@ CONFIG_TCP_CONG_CUBIC=y
 CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
 # CONFIG_NETWORK_SECMARK is not set
 # CONFIG_NETFILTER is not set
 # CONFIG_IP_DCCP is not set
 # CONFIG_IP_SCTP is not set
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
+CONFIG_STP=m
 CONFIG_BRIDGE=m
 # CONFIG_VLAN_8021Q is not set
 # CONFIG_DECNET is not set
@@ -384,6 +396,7 @@ CONFIG_LLC=m
 #
 # CONFIG_CFG80211 is not set
 CONFIG_WIRELESS_EXT=y
+CONFIG_WIRELESS_EXT_SYSFS=y
 # CONFIG_MAC80211 is not set
 # CONFIG_IEEE80211 is not set
 # CONFIG_RFKILL is not set
@@ -400,6 +413,8 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=m
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_DEBUG_DRIVER is not set
 # CONFIG_DEBUG_DEVRES is not set
 # CONFIG_SYS_HYPERVISOR is not set
@@ -420,12 +435,14 @@ CONFIG_BLK_DEV_RAM_SIZE=4096
 # CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_PHANTOM is not set
 CONFIG_EEPROM_93CX6=y
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_HP_ILO is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -499,9 +516,13 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_NSP32 is not set
 # CONFIG_SCSI_DEBUG is not set
 # CONFIG_SCSI_SRP is not set
+# CONFIG_SCSI_DH is not set
 CONFIG_ATA=y
 # CONFIG_ATA_NONSTANDARD is not set
+CONFIG_SATA_PMP=y
 # CONFIG_SATA_AHCI is not set
+# CONFIG_SATA_SIL24 is not set
+CONFIG_ATA_SFF=y
 # CONFIG_SATA_SVW is not set
 # CONFIG_ATA_PIIX is not set
 # CONFIG_SATA_MV is not set
@@ -511,7 +532,6 @@ CONFIG_ATA=y
 # CONFIG_SATA_PROMISE is not set
 # CONFIG_SATA_SX4 is not set
 CONFIG_SATA_SIL=y
-# CONFIG_SATA_SIL24 is not set
 # CONFIG_SATA_SIS is not set
 # CONFIG_SATA_ULI is not set
 # CONFIG_SATA_VIA is not set
@@ -556,17 +576,21 @@ CONFIG_SATA_SIL=y
 # CONFIG_PATA_VIA is not set
 # CONFIG_PATA_WINBOND is not set
 CONFIG_PATA_PLATFORM=y
+# CONFIG_PATA_SCH is not set
 # CONFIG_MD is not set
 # CONFIG_FUSION is not set
 
 #
 # IEEE 1394 (FireWire) support
 #
+
+#
+# Enable only one of the two stacks, unless you know what you are doing
+#
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -585,6 +609,7 @@ CONFIG_AX88796_93CX6=y
 # CONFIG_CASSINI is not set
 # CONFIG_NET_VENDOR_3COM is not set
 # CONFIG_SMC91X is not set
+# CONFIG_SMC911X is not set
 # CONFIG_NET_TULIP is not set
 # CONFIG_HP100 is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
@@ -593,7 +618,6 @@ CONFIG_AX88796_93CX6=y
 # CONFIG_IBM_NEW_EMAC_EMAC4 is not set
 CONFIG_NET_PCI=y
 CONFIG_PCNET32=m
-# CONFIG_PCNET32_NAPI is not set
 # CONFIG_AMD8111_ETH is not set
 # CONFIG_ADAPTEC_STARFIRE is not set
 # CONFIG_B44 is not set
@@ -616,32 +640,28 @@ CONFIG_8139TOO_8129=y
 # CONFIG_TLAN is not set
 CONFIG_VIA_RHINE=m
 CONFIG_VIA_RHINE_MMIO=y
-# CONFIG_VIA_RHINE_NAPI is not set
 # CONFIG_SC92031 is not set
 CONFIG_NETDEV_1000=y
 # CONFIG_ACENIC is not set
 # CONFIG_DL2K is not set
 CONFIG_E1000=m
-# CONFIG_E1000_NAPI is not set
 # CONFIG_E1000_DISABLE_PACKET_SPLIT is not set
 # CONFIG_E1000E is not set
-# CONFIG_E1000E_ENABLED is not set
 # CONFIG_IP1000 is not set
 # CONFIG_IGB is not set
 # CONFIG_NS83820 is not set
 # CONFIG_HAMACHI is not set
 # CONFIG_YELLOWFIN is not set
 CONFIG_R8169=y
-# CONFIG_R8169_NAPI is not set
 # CONFIG_SIS190 is not set
 # CONFIG_SKGE is not set
 # CONFIG_SKY2 is not set
-# CONFIG_SK98LIN is not set
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
+# CONFIG_ATL1E is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
 # CONFIG_CHELSIO_T3 is not set
@@ -654,6 +674,7 @@ CONFIG_NETDEV_10000=y
 # CONFIG_MLX4_CORE is not set
 # CONFIG_TEHUTI is not set
 # CONFIG_BNX2X is not set
+# CONFIG_SFC is not set
 # CONFIG_TR is not set
 
 #
@@ -661,6 +682,7 @@ CONFIG_NETDEV_10000=y
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
 # CONFIG_WAN is not set
 # CONFIG_FDDI is not set
 # CONFIG_HIPPI is not set
@@ -701,6 +723,7 @@ CONFIG_KEYBOARD_ATKBD=y
 # CONFIG_KEYBOARD_XTKBD is not set
 # CONFIG_KEYBOARD_NEWTON is not set
 # CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_SH_KEYSC is not set
 # CONFIG_INPUT_MOUSE is not set
 # CONFIG_INPUT_JOYSTICK is not set
 # CONFIG_INPUT_TABLET is not set
@@ -722,6 +745,7 @@ CONFIG_SERIO_LIBPS2=y
 # Character devices
 #
 # CONFIG_VT is not set
+CONFIG_DEVKMEM=y
 # CONFIG_SERIAL_NONSTANDARD is not set
 # CONFIG_NOZOMI is not set
 
@@ -750,12 +774,7 @@ CONFIG_HW_RANDOM=y
 # CONFIG_TCG_TPM is not set
 CONFIG_DEVPORT=y
 # CONFIG_I2C is not set
-
-#
-# SPI support
-#
 # CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 CONFIG_HWMON=y
@@ -776,6 +795,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_W83627EHF is not set
 # CONFIG_HWMON_DEBUG_CHIP is not set
 CONFIG_THERMAL=y
+# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
 
 #
@@ -787,13 +807,24 @@ CONFIG_SSB_POSSIBLE=y
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
 
 #
 # Multimedia devices
 #
+
+#
+# Multimedia core support
+#
 # CONFIG_VIDEO_DEV is not set
 # CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
 CONFIG_DAB=y
 
 #
@@ -809,24 +840,9 @@ CONFIG_DAB=y
 # Display device support
 #
 # CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Sound
-#
 CONFIG_SOUND=m
-
-#
-# Advanced Linux Sound Architecture
-#
 # CONFIG_SND is not set
-
-#
-# Open Sound System
-#
 CONFIG_SOUND_PRIME=m
-# CONFIG_SOUND_TRIDENT is not set
-# CONFIG_SOUND_MSNDCLAS is not set
-# CONFIG_SOUND_MSNDPIN is not set
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
 # CONFIG_HID_DEBUG is not set
@@ -836,6 +852,8 @@ CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
 CONFIG_USB_ARCH_HAS_EHCI=y
 # CONFIG_USB is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
 
 #
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
@@ -844,6 +862,7 @@ CONFIG_USB_ARCH_HAS_EHCI=y
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
 # CONFIG_INFINIBAND is not set
 CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
@@ -879,10 +898,7 @@ CONFIG_RTC_INTF_DEV=y
 # on-CPU RTC drivers
 #
 CONFIG_RTC_DRV_SH=y
-
-#
-# Userspace I/O
-#
+# CONFIG_DMADEVICES is not set
 # CONFIG_UIO is not set
 
 #
@@ -903,7 +919,6 @@ CONFIG_FS_MBCACHE=y
 # CONFIG_JFS_FS is not set
 CONFIG_FS_POSIX_ACL=y
 # CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
@@ -957,6 +972,7 @@ CONFIG_CONFIGFS_FS=m
 # CONFIG_CRAMFS is not set
 # CONFIG_VXFS_FS is not set
 CONFIG_MINIX_FS=y
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
 # CONFIG_ROMFS_FS is not set
@@ -967,20 +983,17 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
-# CONFIG_NFS_DIRECTIO is not set
+CONFIG_ROOT_NFS=y
 CONFIG_NFSD=y
 CONFIG_NFSD_V3=y
 # CONFIG_NFSD_V3_ACL is not set
 CONFIG_NFSD_V4=y
-CONFIG_NFSD_TCP=y
-CONFIG_ROOT_NFS=y
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_EXPORTFS=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_BIND34 is not set
 CONFIG_RPCSEC_GSS_KRB5=y
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -1043,6 +1056,7 @@ CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 # CONFIG_PRINTK_TIME is not set
 CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
 # CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_FS=y
@@ -1050,9 +1064,12 @@ CONFIG_DEBUG_FS=y
 CONFIG_DEBUG_KERNEL=y
 # CONFIG_DEBUG_SHIRQ is not set
 CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
 CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
 # CONFIG_DEBUG_SLAB is not set
 # CONFIG_DEBUG_PREEMPT is not set
 # CONFIG_DEBUG_SPINLOCK is not set
@@ -1066,6 +1083,8 @@ CONFIG_SCHED_DEBUG=y
 CONFIG_DEBUG_BUGVERBOSE=y
 CONFIG_DEBUG_INFO=y
 # CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_FRAME_POINTER is not set
@@ -1091,51 +1110,84 @@ CONFIG_DEBUG_STACKOVERFLOW=y
 # CONFIG_SECURITY is not set
 # CONFIG_SECURITY_FILE_CAPABILITIES is not set
 CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
 CONFIG_CRYPTO_ALGAPI=y
 CONFIG_CRYPTO_BLKCIPHER=y
-# CONFIG_CRYPTO_SEQIV is not set
 CONFIG_CRYPTO_HASH=y
 CONFIG_CRYPTO_MANAGER=y
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=m
+# CONFIG_CRYPTO_LRW is not set
+CONFIG_CRYPTO_PCBC=m
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
 CONFIG_CRYPTO_HMAC=y
 # CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_NULL is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
 # CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
 # CONFIG_CRYPTO_SHA1 is not set
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
 # CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-CONFIG_CRYPTO_ECB=m
-CONFIG_CRYPTO_CBC=y
-CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_XTS is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
 # CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
 # CONFIG_CRYPTO_CAST5 is not set
 # CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
 # CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_SEED is not set
 # CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
 # CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_TEST is not set
-# CONFIG_CRYPTO_AUTHENC is not set
 # CONFIG_CRYPTO_LZO is not set
 CONFIG_CRYPTO_HW=y
 # CONFIG_CRYPTO_DEV_HIFN_795X is not set
@@ -1144,8 +1196,10 @@ CONFIG_CRYPTO_HW=y
 # Library routines
 #
 CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
+CONFIG_CRC_T10DIF=y
 # CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
diff --git a/arch/sh/configs/r7785rp_defconfig b/arch/sh/configs/r7785rp_defconfig
index 0dc1ce7b9349..1d09d24d4298 100644
--- a/arch/sh/configs/r7785rp_defconfig
+++ b/arch/sh/configs/r7785rp_defconfig
@@ -1,10 +1,11 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.24-rc3
-# Fri Nov 23 14:03:57 2007
+# Linux kernel version: 2.6.26
+# Wed Jul 30 00:59:19 2008
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
+CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig"
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
 CONFIG_GENERIC_BUG=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
@@ -21,6 +22,8 @@ CONFIG_LOCKDEP_SUPPORT=y
 # CONFIG_ARCH_HAS_ILOG2_U32 is not set
 # CONFIG_ARCH_HAS_ILOG2_U64 is not set
 CONFIG_ARCH_NO_VIRT_TO_BUS=y
+CONFIG_ARCH_SUPPORTS_AOUT=y
+CONFIG_IO_TRAPPED=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
@@ -39,18 +42,16 @@ CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_BSD_PROCESS_ACCT=y
 # CONFIG_BSD_PROCESS_ACCT_V3 is not set
 # CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
 # CONFIG_AUDIT is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_CGROUPS is not set
-CONFIG_FAIR_GROUP_SCHED=y
-CONFIG_FAIR_USER_SCHED=y
-# CONFIG_FAIR_CGROUP_SCHED is not set
-# CONFIG_SYSFS_DEPRECATED is not set
+# CONFIG_GROUP_SCHED is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
 # CONFIG_BLK_DEV_INITRD is not set
 CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 CONFIG_SYSCTL=y
@@ -64,20 +65,37 @@ CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 # CONFIG_FUTEX is not set
 CONFIG_ANON_INODES=y
 # CONFIG_EPOLL is not set
 CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
+CONFIG_PROFILING=y
+# CONFIG_MARKERS is not set
+CONFIG_OPROFILE=m
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
+# CONFIG_HAVE_IOREMAP_PROT is not set
+# CONFIG_HAVE_KPROBES is not set
+# CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_ARCH_TRACEHOOK is not set
+# CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+CONFIG_HAVE_CLK=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SLABINFO=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
@@ -88,6 +106,7 @@ CONFIG_BLOCK=y
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -101,6 +120,7 @@ CONFIG_IOSCHED_NOOP=y
 # CONFIG_DEFAULT_CFQ is not set
 CONFIG_DEFAULT_NOOP=y
 CONFIG_DEFAULT_IOSCHED="noop"
+CONFIG_CLASSIC_RCU=y
 
 #
 # System type
@@ -109,7 +129,10 @@ CONFIG_CPU_SH4=y
 CONFIG_CPU_SH4A=y
 CONFIG_CPU_SHX2=y
 # CONFIG_CPU_SUBTYPE_SH7619 is not set
+# CONFIG_CPU_SUBTYPE_SH7203 is not set
 # CONFIG_CPU_SUBTYPE_SH7206 is not set
+# CONFIG_CPU_SUBTYPE_SH7263 is not set
+# CONFIG_CPU_SUBTYPE_MXG is not set
 # CONFIG_CPU_SUBTYPE_SH7705 is not set
 # CONFIG_CPU_SUBTYPE_SH7706 is not set
 # CONFIG_CPU_SUBTYPE_SH7707 is not set
@@ -118,6 +141,7 @@ CONFIG_CPU_SHX2=y
 # CONFIG_CPU_SUBTYPE_SH7710 is not set
 # CONFIG_CPU_SUBTYPE_SH7712 is not set
 # CONFIG_CPU_SUBTYPE_SH7720 is not set
+# CONFIG_CPU_SUBTYPE_SH7721 is not set
 # CONFIG_CPU_SUBTYPE_SH7750 is not set
 # CONFIG_CPU_SUBTYPE_SH7091 is not set
 # CONFIG_CPU_SUBTYPE_SH7750R is not set
@@ -126,12 +150,15 @@ CONFIG_CPU_SHX2=y
 # CONFIG_CPU_SUBTYPE_SH7751R is not set
 # CONFIG_CPU_SUBTYPE_SH7760 is not set
 # CONFIG_CPU_SUBTYPE_SH4_202 is not set
+# CONFIG_CPU_SUBTYPE_SH7723 is not set
+# CONFIG_CPU_SUBTYPE_SH7763 is not set
 # CONFIG_CPU_SUBTYPE_SH7770 is not set
 # CONFIG_CPU_SUBTYPE_SH7780 is not set
 CONFIG_CPU_SUBTYPE_SH7785=y
 # CONFIG_CPU_SUBTYPE_SHX3 is not set
 # CONFIG_CPU_SUBTYPE_SH7343 is not set
 # CONFIG_CPU_SUBTYPE_SH7722 is not set
+# CONFIG_CPU_SUBTYPE_SH7366 is not set
 # CONFIG_CPU_SUBTYPE_SH5_101 is not set
 # CONFIG_CPU_SUBTYPE_SH5_103 is not set
 
@@ -157,7 +184,9 @@ CONFIG_ARCH_SELECT_MEMORY_MODEL=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_PAGE_SIZE_4KB=y
 # CONFIG_PAGE_SIZE_8KB is not set
+# CONFIG_PAGE_SIZE_16KB is not set
 # CONFIG_PAGE_SIZE_64KB is not set
+CONFIG_ENTRY_OFFSET=0x00001000
 # CONFIG_HUGETLB_PAGE_SIZE_64K is not set
 # CONFIG_HUGETLB_PAGE_SIZE_256K is not set
 CONFIG_HUGETLB_PAGE_SIZE_1MB=y
@@ -173,6 +202,7 @@ CONFIG_HAVE_MEMORY_PRESENT=y
 CONFIG_SPARSEMEM_STATIC=y
 # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
 # CONFIG_MEMORY_HOTPLUG is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_RESOURCES_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
@@ -202,6 +232,7 @@ CONFIG_CPU_HAS_FPU=y
 # Board support
 #
 CONFIG_SH_HIGHLANDER=y
+# CONFIG_SH_SH7785LCR is not set
 # CONFIG_SH_R7780RP is not set
 # CONFIG_SH_R7780MP is not set
 CONFIG_SH_R7785RP=y
@@ -245,12 +276,13 @@ CONFIG_HZ_250=y
 # CONFIG_HZ_300 is not set
 # CONFIG_HZ_1000 is not set
 CONFIG_HZ=250
+# CONFIG_SCHED_HRTICK is not set
 CONFIG_KEXEC=y
 # CONFIG_CRASH_DUMP is not set
 # CONFIG_PREEMPT_NONE is not set
 # CONFIG_PREEMPT_VOLUNTARY is not set
 CONFIG_PREEMPT=y
-CONFIG_PREEMPT_BKL=y
+# CONFIG_PREEMPT_RCU is not set
 CONFIG_GUSA=y
 
 #
@@ -295,6 +327,7 @@ CONFIG_XFRM=y
 # CONFIG_XFRM_USER is not set
 # CONFIG_XFRM_SUB_POLICY is not set
 # CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
 # CONFIG_NET_KEY is not set
 CONFIG_INET=y
 # CONFIG_IP_MULTICAST is not set
@@ -329,14 +362,13 @@ CONFIG_TCP_CONG_CUBIC=y
 CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
 # CONFIG_NETWORK_SECMARK is not set
 # CONFIG_NETFILTER is not set
 # CONFIG_IP_DCCP is not set
 # CONFIG_IP_SCTP is not set
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
+CONFIG_STP=m
 CONFIG_BRIDGE=m
 # CONFIG_VLAN_8021Q is not set
 # CONFIG_DECNET is not set
@@ -355,6 +387,7 @@ CONFIG_LLC=m
 #
 # CONFIG_NET_PKTGEN is not set
 # CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
@@ -364,6 +397,7 @@ CONFIG_LLC=m
 #
 # CONFIG_CFG80211 is not set
 CONFIG_WIRELESS_EXT=y
+CONFIG_WIRELESS_EXT_SYSFS=y
 # CONFIG_MAC80211 is not set
 # CONFIG_IEEE80211 is not set
 # CONFIG_RFKILL is not set
@@ -380,6 +414,8 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=m
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_DEBUG_DRIVER is not set
 # CONFIG_DEBUG_DEVRES is not set
 # CONFIG_SYS_HYPERVISOR is not set
@@ -397,14 +433,18 @@ CONFIG_BLK_DEV=y
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_PHANTOM is not set
 CONFIG_EEPROM_93CX6=y
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_HP_ILO is not set
+CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
 #
@@ -464,6 +504,7 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_IPS is not set
 # CONFIG_SCSI_INITIO is not set
 # CONFIG_SCSI_INIA100 is not set
+# CONFIG_SCSI_MVSAS is not set
 # CONFIG_SCSI_STEX is not set
 # CONFIG_SCSI_SYM53C8XX_2 is not set
 # CONFIG_SCSI_IPR is not set
@@ -476,9 +517,13 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_NSP32 is not set
 # CONFIG_SCSI_DEBUG is not set
 # CONFIG_SCSI_SRP is not set
+# CONFIG_SCSI_DH is not set
 CONFIG_ATA=y
 # CONFIG_ATA_NONSTANDARD is not set
+CONFIG_SATA_PMP=y
 # CONFIG_SATA_AHCI is not set
+# CONFIG_SATA_SIL24 is not set
+CONFIG_ATA_SFF=y
 # CONFIG_SATA_SVW is not set
 # CONFIG_ATA_PIIX is not set
 # CONFIG_SATA_MV is not set
@@ -488,7 +533,6 @@ CONFIG_ATA=y
 # CONFIG_SATA_PROMISE is not set
 # CONFIG_SATA_SX4 is not set
 CONFIG_SATA_SIL=y
-# CONFIG_SATA_SIL24 is not set
 # CONFIG_SATA_SIS is not set
 # CONFIG_SATA_ULI is not set
 # CONFIG_SATA_VIA is not set
@@ -517,6 +561,7 @@ CONFIG_SATA_SIL=y
 # CONFIG_PATA_MPIIX is not set
 # CONFIG_PATA_OLDPIIX is not set
 # CONFIG_PATA_NETCELL is not set
+# CONFIG_PATA_NINJA32 is not set
 # CONFIG_PATA_NS87410 is not set
 # CONFIG_PATA_NS87415 is not set
 # CONFIG_PATA_OPTI is not set
@@ -532,24 +577,27 @@ CONFIG_SATA_SIL=y
 # CONFIG_PATA_VIA is not set
 # CONFIG_PATA_WINBOND is not set
 CONFIG_PATA_PLATFORM=y
+# CONFIG_PATA_SCH is not set
 # CONFIG_MD is not set
 # CONFIG_FUSION is not set
 
 #
 # IEEE 1394 (FireWire) support
 #
+
+#
+# Enable only one of the two stacks, unless you know what you are doing
+#
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
 # CONFIG_EQUALIZER is not set
 # CONFIG_TUN is not set
 # CONFIG_VETH is not set
-# CONFIG_IP1000 is not set
 # CONFIG_ARCNET is not set
 # CONFIG_PHYLIB is not set
 CONFIG_NET_ETHERNET=y
@@ -576,20 +624,21 @@ CONFIG_NETDEV_1000=y
 # CONFIG_DL2K is not set
 # CONFIG_E1000 is not set
 # CONFIG_E1000E is not set
+# CONFIG_IP1000 is not set
+# CONFIG_IGB is not set
 # CONFIG_NS83820 is not set
 # CONFIG_HAMACHI is not set
 # CONFIG_YELLOWFIN is not set
 CONFIG_R8169=y
-# CONFIG_R8169_NAPI is not set
 # CONFIG_SIS190 is not set
 # CONFIG_SKGE is not set
 # CONFIG_SKY2 is not set
-# CONFIG_SK98LIN is not set
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
+# CONFIG_ATL1E is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
 # CONFIG_CHELSIO_T3 is not set
@@ -601,6 +650,8 @@ CONFIG_NETDEV_10000=y
 # CONFIG_NIU is not set
 # CONFIG_MLX4_CORE is not set
 # CONFIG_TEHUTI is not set
+# CONFIG_BNX2X is not set
+# CONFIG_SFC is not set
 # CONFIG_TR is not set
 
 #
@@ -608,13 +659,13 @@ CONFIG_NETDEV_10000=y
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
 # CONFIG_WAN is not set
 # CONFIG_FDDI is not set
 # CONFIG_HIPPI is not set
 # CONFIG_PPP is not set
 # CONFIG_SLIP is not set
 # CONFIG_NET_FC is not set
-# CONFIG_SHAPER is not set
 # CONFIG_NETCONSOLE is not set
 # CONFIG_NETPOLL is not set
 # CONFIG_NET_POLL_CONTROLLER is not set
@@ -649,6 +700,7 @@ CONFIG_KEYBOARD_ATKBD=y
 # CONFIG_KEYBOARD_XTKBD is not set
 # CONFIG_KEYBOARD_NEWTON is not set
 # CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_SH_KEYSC is not set
 # CONFIG_INPUT_MOUSE is not set
 # CONFIG_INPUT_JOYSTICK is not set
 # CONFIG_INPUT_TABLET is not set
@@ -670,7 +722,9 @@ CONFIG_SERIO_LIBPS2=y
 # Character devices
 #
 # CONFIG_VT is not set
+CONFIG_DEVKMEM=y
 # CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_NOZOMI is not set
 
 #
 # Serial drivers
@@ -697,12 +751,7 @@ CONFIG_HW_RANDOM=y
 # CONFIG_TCG_TPM is not set
 CONFIG_DEVPORT=y
 # CONFIG_I2C is not set
-
-#
-# SPI support
-#
 # CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 CONFIG_HWMON=y
@@ -722,6 +771,8 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_W83627HF is not set
 # CONFIG_SENSORS_W83627EHF is not set
 # CONFIG_HWMON_DEBUG_CHIP is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
 
 #
@@ -733,13 +784,24 @@ CONFIG_SSB_POSSIBLE=y
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
 
 #
 # Multimedia devices
 #
+
+#
+# Multimedia core support
+#
 # CONFIG_VIDEO_DEV is not set
 # CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
 # CONFIG_DAB is not set
 
 #
@@ -751,15 +813,15 @@ CONFIG_SSB_POSSIBLE=y
 CONFIG_FB=y
 # CONFIG_FIRMWARE_EDID is not set
 # CONFIG_FB_DDC is not set
-# CONFIG_FB_CFB_FILLRECT is not set
-# CONFIG_FB_CFB_COPYAREA is not set
-# CONFIG_FB_CFB_IMAGEBLIT is not set
+CONFIG_FB_CFB_FILLRECT=m
+CONFIG_FB_CFB_COPYAREA=m
+CONFIG_FB_CFB_IMAGEBLIT=m
 # CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
 # CONFIG_FB_SYS_FILLRECT is not set
 # CONFIG_FB_SYS_COPYAREA is not set
 # CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
 # CONFIG_FB_SYS_FOPS is not set
-CONFIG_FB_DEFERRED_IO=y
 # CONFIG_FB_SVGALIB is not set
 # CONFIG_FB_MACMODES is not set
 # CONFIG_FB_BACKLIGHT is not set
@@ -792,6 +854,8 @@ CONFIG_FB_DEFERRED_IO=y
 # CONFIG_FB_TRIDENT is not set
 # CONFIG_FB_ARK is not set
 # CONFIG_FB_PM3 is not set
+# CONFIG_FB_CARMINE is not set
+CONFIG_FB_SH_MOBILE_LCDC=m
 # CONFIG_FB_VIRTUAL is not set
 # CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
@@ -800,24 +864,9 @@ CONFIG_FB_DEFERRED_IO=y
 #
 # CONFIG_DISPLAY_SUPPORT is not set
 # CONFIG_LOGO is not set
-
-#
-# Sound
-#
 CONFIG_SOUND=m
-
-#
-# Advanced Linux Sound Architecture
-#
 # CONFIG_SND is not set
-
-#
-# Open Sound System
-#
 CONFIG_SOUND_PRIME=m
-# CONFIG_SOUND_TRIDENT is not set
-# CONFIG_SOUND_MSNDCLAS is not set
-# CONFIG_SOUND_MSNDPIN is not set
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
 # CONFIG_HID_DEBUG is not set
@@ -827,17 +876,17 @@ CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
 CONFIG_USB_ARCH_HAS_EHCI=y
 # CONFIG_USB is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
 
 #
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
 #
-
-#
-# USB Gadget Support
-#
 # CONFIG_USB_GADGET is not set
 # CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
 # CONFIG_INFINIBAND is not set
 CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
@@ -861,9 +910,10 @@ CONFIG_RTC_INTF_DEV=y
 #
 # Platform RTC drivers
 #
+# CONFIG_RTC_DRV_DS1511 is not set
 # CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
 # CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
 # CONFIG_RTC_DRV_M48T86 is not set
 # CONFIG_RTC_DRV_M48T59 is not set
 # CONFIG_RTC_DRV_V3020 is not set
@@ -872,10 +922,7 @@ CONFIG_RTC_INTF_DEV=y
 # on-CPU RTC drivers
 #
 CONFIG_RTC_DRV_SH=y
-
-#
-# Userspace I/O
-#
+# CONFIG_DMADEVICES is not set
 # CONFIG_UIO is not set
 
 #
@@ -896,14 +943,11 @@ CONFIG_FS_MBCACHE=y
 # CONFIG_JFS_FS is not set
 CONFIG_FS_POSIX_ACL=y
 # CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
-CONFIG_MINIX_FS=y
-# CONFIG_ROMFS_FS is not set
+CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
 CONFIG_FUSE_FS=m
@@ -951,8 +995,11 @@ CONFIG_CONFIGFS_FS=m
 # CONFIG_EFS_FS is not set
 # CONFIG_CRAMFS is not set
 # CONFIG_VXFS_FS is not set
+CONFIG_MINIX_FS=y
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
@@ -960,20 +1007,17 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
-# CONFIG_NFS_DIRECTIO is not set
+CONFIG_ROOT_NFS=y
 CONFIG_NFSD=y
 CONFIG_NFSD_V3=y
 # CONFIG_NFSD_V3_ACL is not set
 CONFIG_NFSD_V4=y
-CONFIG_NFSD_TCP=y
-CONFIG_ROOT_NFS=y
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_EXPORTFS=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_BIND34 is not set
 CONFIG_RPCSEC_GSS_KRB5=y
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -1028,10 +1072,6 @@ CONFIG_NLS_ISO8859_1=y
 # CONFIG_NLS_KOI8_U is not set
 # CONFIG_NLS_UTF8 is not set
 # CONFIG_DLM is not set
-CONFIG_INSTRUMENTATION=y
-CONFIG_PROFILING=y
-CONFIG_OPROFILE=m
-# CONFIG_MARKERS is not set
 
 #
 # Kernel hacking
@@ -1040,6 +1080,7 @@ CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 # CONFIG_PRINTK_TIME is not set
 CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
 # CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_FS=y
@@ -1050,6 +1091,7 @@ CONFIG_DEBUG_KERNEL=y
 CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
 # CONFIG_DEBUG_SLAB is not set
 # CONFIG_DEBUG_PREEMPT is not set
 CONFIG_DEBUG_SPINLOCK=y
@@ -1066,12 +1108,14 @@ CONFIG_STACKTRACE=y
 CONFIG_DEBUG_BUGVERBOSE=y
 CONFIG_DEBUG_INFO=y
 # CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 CONFIG_FRAME_POINTER=y
-CONFIG_FORCED_INLINING=y
 # CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_SAMPLES is not set
 CONFIG_SH_STANDARD_BIOS=y
@@ -1091,54 +1135,96 @@ CONFIG_4KSTACKS=y
 # CONFIG_SECURITY is not set
 # CONFIG_SECURITY_FILE_CAPABILITIES is not set
 CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
 CONFIG_CRYPTO_ALGAPI=y
 CONFIG_CRYPTO_BLKCIPHER=y
 CONFIG_CRYPTO_HASH=y
 CONFIG_CRYPTO_MANAGER=y
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=m
+# CONFIG_CRYPTO_LRW is not set
+CONFIG_CRYPTO_PCBC=m
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
 CONFIG_CRYPTO_HMAC=y
 # CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_NULL is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
 # CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
 # CONFIG_CRYPTO_SHA1 is not set
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
 # CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-CONFIG_CRYPTO_ECB=m
-CONFIG_CRYPTO_CBC=y
-CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_XTS is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
 # CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
 # CONFIG_CRYPTO_CAST5 is not set
 # CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
 # CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_SALSA20 is not set
 # CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
 # CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_TEST is not set
-# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_LZO is not set
 CONFIG_CRYPTO_HW=y
+# CONFIG_CRYPTO_DEV_HIFN_795X is not set
 
 #
 # Library routines
 #
 CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
+CONFIG_CRC_T10DIF=y
 # CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
diff --git a/arch/sh/configs/rsk7203_defconfig b/arch/sh/configs/rsk7203_defconfig
index a0ebd439cbd2..840fe3843ffa 100644
--- a/arch/sh/configs/rsk7203_defconfig
+++ b/arch/sh/configs/rsk7203_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc4
-# Tue Jun  3 13:02:42 2008
+# Linux kernel version: 2.6.26
+# Mon Jul 28 22:23:03 2008
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
@@ -33,21 +33,22 @@ CONFIG_LOCALVERSION=""
 CONFIG_SYSVIPC=y
 CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_POSIX_MQUEUE=y
-# CONFIG_BSD_PROCESS_ACCT is not set
+CONFIG_BSD_PROCESS_ACCT=y
+# CONFIG_BSD_PROCESS_ACCT_V3 is not set
 # CONFIG_TASKSTATS is not set
 # CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
+CONFIG_IKCONFIG=y
+# CONFIG_IKCONFIG_PROC is not set
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_CGROUPS is not set
-CONFIG_GROUP_SCHED=y
-CONFIG_FAIR_GROUP_SCHED=y
-# CONFIG_RT_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_GROUP_SCHED is not set
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
+CONFIG_NAMESPACES=y
+CONFIG_UTS_NS=y
+CONFIG_IPC_NS=y
+CONFIG_USER_NS=y
+CONFIG_PID_NS=y
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
 CONFIG_CC_OPTIMIZE_FOR_SIZE=y
@@ -72,26 +73,36 @@ CONFIG_SIGNALFD=y
 CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_SLAB=y
+# CONFIG_SLAB is not set
 # CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
+CONFIG_SLOB=y
 CONFIG_PROFILING=y
 # CONFIG_MARKERS is not set
 CONFIG_OPROFILE=y
 CONFIG_HAVE_OPROFILE=y
+# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
+# CONFIG_HAVE_IOREMAP_PROT is not set
 # CONFIG_HAVE_KPROBES is not set
 # CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_ARCH_TRACEHOOK is not set
 # CONFIG_HAVE_DMA_ATTRS is not set
-CONFIG_SLABINFO=y
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+CONFIG_HAVE_CLK=y
 CONFIG_RT_MUTEXES=y
 CONFIG_TINY_SHMEM=y
 CONFIG_BASE_SMALL=0
-# CONFIG_MODULES is not set
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+# CONFIG_MODULE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -162,7 +173,9 @@ CONFIG_ARCH_POPULATES_NODE_MAP=y
 CONFIG_ARCH_SELECT_MEMORY_MODEL=y
 CONFIG_PAGE_SIZE_4KB=y
 # CONFIG_PAGE_SIZE_8KB is not set
+# CONFIG_PAGE_SIZE_16KB is not set
 # CONFIG_PAGE_SIZE_64KB is not set
+CONFIG_ENTRY_OFFSET=0x00001000
 CONFIG_SELECT_MEMORY_MODEL=y
 CONFIG_FLATMEM_MANUAL=y
 # CONFIG_DISCONTIGMEM_MANUAL is not set
@@ -196,6 +209,7 @@ CONFIG_CPU_HAS_FPU=y
 #
 # Board support
 #
+CONFIG_SH_RSK7203=y
 
 #
 # Timer and clock configuration
@@ -274,6 +288,7 @@ CONFIG_CMDLINE="console=ttySC0,115200 earlyprintk=serial ignore_loglevel"
 #
 # Executable file formats
 #
+CONFIG_BINFMT_ELF_FDPIC=y
 CONFIG_BINFMT_FLAT=y
 CONFIG_BINFMT_ZFLAT=y
 CONFIG_BINFMT_SHARED_FLAT=y
@@ -424,8 +439,8 @@ CONFIG_MTD_CFI_UTIL=y
 #
 # CONFIG_MTD_COMPLEX_MAPPINGS is not set
 CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_PHYSMAP_START=0x20000000
-CONFIG_MTD_PHYSMAP_LEN=0x01000000
+CONFIG_MTD_PHYSMAP_START=0x0
+CONFIG_MTD_PHYSMAP_LEN=0x0
 CONFIG_MTD_PHYSMAP_BANKWIDTH=4
 # CONFIG_MTD_UCLINUX is not set
 # CONFIG_MTD_PLATRAM is not set
@@ -456,9 +471,11 @@ CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_COW_COMMON is not set
 # CONFIG_BLK_DEV_LOOP is not set
 # CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_UB is not set
 # CONFIG_BLK_DEV_RAM is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
@@ -475,7 +492,6 @@ CONFIG_HAVE_IDE=y
 # CONFIG_ATA is not set
 # CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -487,15 +503,15 @@ CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
 # CONFIG_AX88796 is not set
 # CONFIG_STNIC is not set
-CONFIG_SMC91X=y
+# CONFIG_SMC91X is not set
+CONFIG_SMC911X=y
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
 # CONFIG_IBM_NEW_EMAC_RGMII is not set
 # CONFIG_IBM_NEW_EMAC_TAH is not set
 # CONFIG_IBM_NEW_EMAC_EMAC4 is not set
 # CONFIG_B44 is not set
-CONFIG_NETDEV_1000=y
-# CONFIG_E1000E_ENABLED is not set
-CONFIG_NETDEV_10000=y
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
 
 #
 # Wireless LAN
@@ -503,6 +519,15 @@ CONFIG_NETDEV_10000=y
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
 # CONFIG_IWLWIFI_LEDS is not set
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
 # CONFIG_WAN is not set
 # CONFIG_PPP is not set
 # CONFIG_SLIP is not set
@@ -587,6 +612,7 @@ CONFIG_SSB_POSSIBLE=y
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
 
@@ -605,6 +631,7 @@ CONFIG_SSB_POSSIBLE=y
 # Multimedia drivers
 #
 CONFIG_DAB=y
+# CONFIG_USB_DABUSB is not set
 
 #
 # Graphics support
@@ -618,26 +645,96 @@ CONFIG_VIDEO_OUTPUT_CONTROL=y
 # Display device support
 #
 # CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Sound
-#
 # CONFIG_SOUND is not set
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
 # CONFIG_HID_DEBUG is not set
 # CONFIG_HIDRAW is not set
+
+#
+# USB Input Devices
+#
+CONFIG_USB_HID=y
+# CONFIG_USB_HIDINPUT_POWERBOOK is not set
+# CONFIG_HID_FF is not set
+# CONFIG_USB_HIDDEV is not set
 CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
 # CONFIG_USB_ARCH_HAS_OHCI is not set
 # CONFIG_USB_ARCH_HAS_EHCI is not set
-# CONFIG_USB is not set
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
+
+#
+# Miscellaneous USB options
+#
+CONFIG_USB_DEVICEFS=y
+CONFIG_USB_DEVICE_CLASS=y
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_OTG is not set
 # CONFIG_USB_OTG_WHITELIST is not set
 # CONFIG_USB_OTG_BLACKLIST_HUB is not set
 
 #
+# USB Host Controller Drivers
+#
+# CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
+# CONFIG_USB_SL811_HCD is not set
+CONFIG_USB_R8A66597_HCD=y
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
+
+#
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
 #
+
+#
+# may also be needed; see USB_STORAGE Help for more information
+#
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+CONFIG_USB_MON=y
+
+#
+# USB port drivers
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_AUERSWALD is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_PHIDGET is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_TEST is not set
+# CONFIG_USB_ISIGHTFW is not set
 # CONFIG_USB_GADGET is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
@@ -677,6 +774,7 @@ CONFIG_RTC_INTF_DEV=y
 # on-CPU RTC drivers
 #
 CONFIG_RTC_DRV_SH=y
+# CONFIG_DMADEVICES is not set
 # CONFIG_UIO is not set
 
 #
@@ -734,6 +832,7 @@ CONFIG_SYSFS=y
 # CONFIG_CRAMFS is not set
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
 CONFIG_ROMFS_FS=y
@@ -743,12 +842,11 @@ CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 # CONFIG_NFS_V3 is not set
 # CONFIG_NFS_V4 is not set
-# CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
 CONFIG_LOCKD=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -775,16 +873,20 @@ CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
 # CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
+CONFIG_DEBUG_FS=y
 # CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
 CONFIG_DEBUG_SHIRQ=y
 CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
 CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_DEBUG_SLAB is not set
+CONFIG_DEBUG_OBJECTS=y
+# CONFIG_DEBUG_OBJECTS_SELFTEST is not set
+# CONFIG_DEBUG_OBJECTS_FREE is not set
+# CONFIG_DEBUG_OBJECTS_TIMERS is not set
 # CONFIG_DEBUG_RT_MUTEXES is not set
 # CONFIG_RT_MUTEX_TESTER is not set
 # CONFIG_DEBUG_SPINLOCK is not set
@@ -797,12 +899,14 @@ CONFIG_DEBUG_SPINLOCK_SLEEP=y
 # CONFIG_DEBUG_KOBJECT is not set
 CONFIG_DEBUG_BUGVERBOSE=y
 CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
+CONFIG_DEBUG_VM=y
+CONFIG_DEBUG_WRITECOUNT=y
+# CONFIG_DEBUG_MEMORY_INIT is not set
+CONFIG_DEBUG_LIST=y
+CONFIG_DEBUG_SG=y
 CONFIG_FRAME_POINTER=y
 # CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_SAMPLES is not set
@@ -830,6 +934,7 @@ CONFIG_BITREVERSE=y
 # CONFIG_GENERIC_FIND_FIRST_BIT is not set
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
 # CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
diff --git a/arch/sh/configs/rts7751r2d1_defconfig b/arch/sh/configs/rts7751r2d1_defconfig
index 3a915fd436d9..8413236c1b37 100644
--- a/arch/sh/configs/rts7751r2d1_defconfig
+++ b/arch/sh/configs/rts7751r2d1_defconfig
@@ -1,10 +1,11 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.24
-# Thu Feb  7 16:25:55 2008
+# Linux kernel version: 2.6.26
+# Wed Jul 30 01:55:52 2008
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
+CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig"
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
 CONFIG_GENERIC_BUG=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
@@ -20,6 +21,8 @@ CONFIG_LOCKDEP_SUPPORT=y
 # CONFIG_ARCH_HAS_ILOG2_U32 is not set
 # CONFIG_ARCH_HAS_ILOG2_U64 is not set
 CONFIG_ARCH_NO_VIRT_TO_BUS=y
+CONFIG_ARCH_SUPPORTS_AOUT=y
+CONFIG_IO_TRAPPED=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
@@ -36,17 +39,15 @@ CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_POSIX_MQUEUE is not set
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
 # CONFIG_AUDIT is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_CGROUPS is not set
-CONFIG_FAIR_GROUP_SCHED=y
-CONFIG_FAIR_USER_SCHED=y
-# CONFIG_FAIR_CGROUP_SCHED is not set
+# CONFIG_GROUP_SCHED is not set
 CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
 # CONFIG_BLK_DEV_INITRD is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
@@ -76,22 +77,31 @@ CONFIG_PROFILING=y
 # CONFIG_MARKERS is not set
 CONFIG_OPROFILE=y
 CONFIG_HAVE_OPROFILE=y
+# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
+# CONFIG_HAVE_IOREMAP_PROT is not set
 # CONFIG_HAVE_KPROBES is not set
+# CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_ARCH_TRACEHOOK is not set
+# CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+CONFIG_HAVE_CLK=y
 CONFIG_PROC_PAGE_MONITOR=y
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
 # CONFIG_MODULE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-# CONFIG_KMOD is not set
+CONFIG_KMOD=y
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -106,7 +116,6 @@ CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
 CONFIG_CLASSIC_RCU=y
-# CONFIG_PREEMPT_RCU is not set
 
 #
 # System type
@@ -116,6 +125,7 @@ CONFIG_CPU_SH4=y
 # CONFIG_CPU_SUBTYPE_SH7203 is not set
 # CONFIG_CPU_SUBTYPE_SH7206 is not set
 # CONFIG_CPU_SUBTYPE_SH7263 is not set
+# CONFIG_CPU_SUBTYPE_MXG is not set
 # CONFIG_CPU_SUBTYPE_SH7705 is not set
 # CONFIG_CPU_SUBTYPE_SH7706 is not set
 # CONFIG_CPU_SUBTYPE_SH7707 is not set
@@ -133,6 +143,7 @@ CONFIG_CPU_SH4=y
 CONFIG_CPU_SUBTYPE_SH7751R=y
 # CONFIG_CPU_SUBTYPE_SH7760 is not set
 # CONFIG_CPU_SUBTYPE_SH4_202 is not set
+# CONFIG_CPU_SUBTYPE_SH7723 is not set
 # CONFIG_CPU_SUBTYPE_SH7763 is not set
 # CONFIG_CPU_SUBTYPE_SH7770 is not set
 # CONFIG_CPU_SUBTYPE_SH7780 is not set
@@ -140,6 +151,7 @@ CONFIG_CPU_SUBTYPE_SH7751R=y
 # CONFIG_CPU_SUBTYPE_SHX3 is not set
 # CONFIG_CPU_SUBTYPE_SH7343 is not set
 # CONFIG_CPU_SUBTYPE_SH7722 is not set
+# CONFIG_CPU_SUBTYPE_SH7366 is not set
 # CONFIG_CPU_SUBTYPE_SH5_101 is not set
 # CONFIG_CPU_SUBTYPE_SH5_103 is not set
 
@@ -161,7 +173,9 @@ CONFIG_ARCH_POPULATES_NODE_MAP=y
 CONFIG_ARCH_SELECT_MEMORY_MODEL=y
 CONFIG_PAGE_SIZE_4KB=y
 # CONFIG_PAGE_SIZE_8KB is not set
+# CONFIG_PAGE_SIZE_16KB is not set
 # CONFIG_PAGE_SIZE_64KB is not set
+CONFIG_ENTRY_OFFSET=0x00001000
 CONFIG_SELECT_MEMORY_MODEL=y
 CONFIG_FLATMEM_MANUAL=y
 # CONFIG_DISCONTIGMEM_MANUAL is not set
@@ -170,6 +184,7 @@ CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 CONFIG_SPARSEMEM_STATIC=y
 # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_RESOURCES_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
@@ -256,7 +271,6 @@ CONFIG_HZ=250
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
-CONFIG_RCU_TRACE=y
 CONFIG_GUSA=y
 # CONFIG_GUSA_RB is not set
 
@@ -332,8 +346,6 @@ CONFIG_TCP_CONG_CUBIC=y
 CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
 # CONFIG_NETWORK_SECMARK is not set
 # CONFIG_NETFILTER is not set
 # CONFIG_IP_DCCP is not set
@@ -367,6 +379,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 #
 # CONFIG_CFG80211 is not set
 CONFIG_WIRELESS_EXT=y
+CONFIG_WIRELESS_EXT_SYSFS=y
 # CONFIG_MAC80211 is not set
 # CONFIG_IEEE80211 is not set
 # CONFIG_RFKILL is not set
@@ -383,6 +396,8 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=m
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_SYS_HYPERVISOR is not set
 # CONFIG_CONNECTOR is not set
 # CONFIG_MTD is not set
@@ -399,14 +414,18 @@ CONFIG_BLK_DEV=y
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_PHANTOM is not set
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_HP_ILO is not set
+CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
 #
@@ -466,6 +485,7 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_IPS is not set
 # CONFIG_SCSI_INITIO is not set
 # CONFIG_SCSI_INIA100 is not set
+# CONFIG_SCSI_MVSAS is not set
 # CONFIG_SCSI_STEX is not set
 # CONFIG_SCSI_SYM53C8XX_2 is not set
 # CONFIG_SCSI_IPR is not set
@@ -478,9 +498,13 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_NSP32 is not set
 # CONFIG_SCSI_DEBUG is not set
 # CONFIG_SCSI_SRP is not set
+# CONFIG_SCSI_DH is not set
 CONFIG_ATA=y
 # CONFIG_ATA_NONSTANDARD is not set
+CONFIG_SATA_PMP=y
 # CONFIG_SATA_AHCI is not set
+# CONFIG_SATA_SIL24 is not set
+CONFIG_ATA_SFF=y
 # CONFIG_SATA_SVW is not set
 # CONFIG_ATA_PIIX is not set
 # CONFIG_SATA_MV is not set
@@ -490,7 +514,6 @@ CONFIG_ATA=y
 # CONFIG_SATA_PROMISE is not set
 # CONFIG_SATA_SX4 is not set
 # CONFIG_SATA_SIL is not set
-# CONFIG_SATA_SIL24 is not set
 # CONFIG_SATA_SIS is not set
 # CONFIG_SATA_ULI is not set
 # CONFIG_SATA_VIA is not set
@@ -535,17 +558,21 @@ CONFIG_ATA=y
 # CONFIG_PATA_VIA is not set
 # CONFIG_PATA_WINBOND is not set
 CONFIG_PATA_PLATFORM=y
+# CONFIG_PATA_SCH is not set
 # CONFIG_MD is not set
 # CONFIG_FUSION is not set
 
 #
 # IEEE 1394 (FireWire) support
 #
+
+#
+# Enable only one of the two stacks, unless you know what you are doing
+#
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -564,6 +591,7 @@ CONFIG_MII=y
 # CONFIG_NET_VENDOR_3COM is not set
 # CONFIG_SMC91X is not set
 # CONFIG_ENC28J60 is not set
+# CONFIG_SMC911X is not set
 # CONFIG_NET_TULIP is not set
 # CONFIG_HP100 is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
@@ -599,7 +627,6 @@ CONFIG_NETDEV_1000=y
 # CONFIG_DL2K is not set
 # CONFIG_E1000 is not set
 # CONFIG_E1000E is not set
-# CONFIG_E1000E_ENABLED is not set
 # CONFIG_IP1000 is not set
 # CONFIG_IGB is not set
 # CONFIG_NS83820 is not set
@@ -609,12 +636,12 @@ CONFIG_NETDEV_1000=y
 # CONFIG_SIS190 is not set
 # CONFIG_SKGE is not set
 # CONFIG_SKY2 is not set
-# CONFIG_SK98LIN is not set
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
+# CONFIG_ATL1E is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
 # CONFIG_CHELSIO_T3 is not set
@@ -627,6 +654,7 @@ CONFIG_NETDEV_10000=y
 # CONFIG_MLX4_CORE is not set
 # CONFIG_TEHUTI is not set
 # CONFIG_BNX2X is not set
+# CONFIG_SFC is not set
 # CONFIG_TR is not set
 
 #
@@ -634,6 +662,7 @@ CONFIG_NETDEV_10000=y
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
 
 #
 # USB Network Adapters
@@ -690,9 +719,11 @@ CONFIG_INPUT=y
 # Character devices
 #
 CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
 CONFIG_VT_HW_CONSOLE_BINDING=y
+CONFIG_DEVKMEM=y
 # CONFIG_SERIAL_NONSTANDARD is not set
 # CONFIG_NOZOMI is not set
 
@@ -726,10 +757,6 @@ CONFIG_HW_RANDOM=y
 # CONFIG_TCG_TPM is not set
 CONFIG_DEVPORT=y
 # CONFIG_I2C is not set
-
-#
-# SPI support
-#
 CONFIG_SPI=y
 CONFIG_SPI_MASTER=y
 
@@ -765,6 +792,8 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_W83627HF is not set
 # CONFIG_SENSORS_W83627EHF is not set
 # CONFIG_HWMON_DEBUG_CHIP is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
 
 #
@@ -776,13 +805,24 @@ CONFIG_SSB_POSSIBLE=y
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 CONFIG_MFD_SM501=y
+# CONFIG_HTC_PASIC3 is not set
 
 #
 # Multimedia devices
 #
+
+#
+# Multimedia core support
+#
 # CONFIG_VIDEO_DEV is not set
 # CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
 CONFIG_DAB=y
 # CONFIG_USB_DABUSB is not set
 
@@ -802,8 +842,8 @@ CONFIG_FB_CFB_IMAGEBLIT=y
 # CONFIG_FB_SYS_FILLRECT is not set
 # CONFIG_FB_SYS_COPYAREA is not set
 # CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
 # CONFIG_FB_SYS_FOPS is not set
-CONFIG_FB_DEFERRED_IO=y
 # CONFIG_FB_SVGALIB is not set
 # CONFIG_FB_MACMODES is not set
 # CONFIG_FB_BACKLIGHT is not set
@@ -836,6 +876,8 @@ CONFIG_FB_DEFERRED_IO=y
 # CONFIG_FB_TRIDENT is not set
 # CONFIG_FB_ARK is not set
 # CONFIG_FB_PM3 is not set
+# CONFIG_FB_CARMINE is not set
+CONFIG_FB_SH_MOBILE_LCDC=m
 CONFIG_FB_SM501=y
 # CONFIG_FB_VIRTUAL is not set
 # CONFIG_BACKLIGHT_LCD_SUPPORT is not set
@@ -862,15 +904,7 @@ CONFIG_LOGO=y
 # CONFIG_LOGO_SUPERH_MONO is not set
 # CONFIG_LOGO_SUPERH_VGA16 is not set
 CONFIG_LOGO_SUPERH_CLUT224=y
-
-#
-# Sound
-#
 CONFIG_SOUND=y
-
-#
-# Advanced Linux Sound Architecture
-#
 CONFIG_SND=m
 CONFIG_SND_TIMER=m
 CONFIG_SND_PCM=m
@@ -884,21 +918,17 @@ CONFIG_SND_SUPPORT_OLD_API=y
 CONFIG_SND_VERBOSE_PROCFS=y
 # CONFIG_SND_VERBOSE_PRINTK is not set
 # CONFIG_SND_DEBUG is not set
-
-#
-# Generic devices
-#
+CONFIG_SND_VMASTER=y
 CONFIG_SND_MPU401_UART=m
 CONFIG_SND_OPL3_LIB=m
 CONFIG_SND_AC97_CODEC=m
+CONFIG_SND_DRIVERS=y
 # CONFIG_SND_DUMMY is not set
 # CONFIG_SND_MTPAV is not set
 # CONFIG_SND_SERIAL_U16550 is not set
 # CONFIG_SND_MPU401 is not set
-
-#
-# PCI devices
-#
+# CONFIG_SND_AC97_POWER_SAVE is not set
+CONFIG_SND_PCI=y
 # CONFIG_SND_AD1889 is not set
 # CONFIG_SND_ALS300 is not set
 # CONFIG_SND_ALI5451 is not set
@@ -907,6 +937,7 @@ CONFIG_SND_AC97_CODEC=m
 # CONFIG_SND_AU8810 is not set
 # CONFIG_SND_AU8820 is not set
 # CONFIG_SND_AU8830 is not set
+# CONFIG_SND_AW2 is not set
 # CONFIG_SND_AZT3328 is not set
 # CONFIG_SND_BT87X is not set
 # CONFIG_SND_CA0106 is not set
@@ -957,43 +988,13 @@ CONFIG_SND_AC97_CODEC=m
 # CONFIG_SND_VIRTUOSO is not set
 # CONFIG_SND_VX222 is not set
 CONFIG_SND_YMFPCI=m
-CONFIG_SND_YMFPCI_FIRMWARE_IN_KERNEL=y
-# CONFIG_SND_AC97_POWER_SAVE is not set
-
-#
-# SPI devices
-#
-
-#
-# SUPERH devices
-#
-
-#
-# USB devices
-#
+CONFIG_SND_SPI=y
+CONFIG_SND_SUPERH=y
+CONFIG_SND_USB=y
 # CONFIG_SND_USB_AUDIO is not set
 # CONFIG_SND_USB_CAIAQ is not set
-
-#
-# System on Chip audio support
-#
 # CONFIG_SND_SOC is not set
-
-#
-# SoC Audio support for SuperH
-#
-
-#
-# ALSA SoC audio for Freescale SOCs
-#
-
-#
-# Open Sound System
-#
 CONFIG_SOUND_PRIME=m
-# CONFIG_SOUND_TRIDENT is not set
-# CONFIG_SOUND_MSNDCLAS is not set
-# CONFIG_SOUND_MSNDPIN is not set
 CONFIG_AC97_BUS=m
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
@@ -1022,12 +1023,16 @@ CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
 CONFIG_USB_DEVICE_CLASS=y
 # CONFIG_USB_DYNAMIC_MINORS is not set
 # CONFIG_USB_OTG is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
 
 #
 # USB Host Controller Drivers
 #
+# CONFIG_USB_C67X00_HCD is not set
 # CONFIG_USB_EHCI_HCD is not set
 # CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
 CONFIG_USB_OHCI_HCD=y
 # CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
 # CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
@@ -1041,6 +1046,7 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y
 #
 # CONFIG_USB_ACM is not set
 # CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
 
 #
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
@@ -1060,7 +1066,9 @@ CONFIG_USB_STORAGE=y
 # CONFIG_USB_STORAGE_SDDR55 is not set
 # CONFIG_USB_STORAGE_JUMPSHOT is not set
 # CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_ONETOUCH is not set
 # CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
 CONFIG_USB_LIBUSUAL=y
 
 #
@@ -1096,9 +1104,12 @@ CONFIG_USB_LIBUSUAL=y
 # CONFIG_USB_LD is not set
 # CONFIG_USB_TRANCEVIBRATOR is not set
 # CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_ISIGHTFW is not set
 # CONFIG_USB_GADGET is not set
 # CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
 # CONFIG_INFINIBAND is not set
 CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
@@ -1118,6 +1129,8 @@ CONFIG_RTC_INTF_DEV=y
 #
 # SPI RTC drivers
 #
+# CONFIG_RTC_DRV_M41T94 is not set
+# CONFIG_RTC_DRV_DS1305 is not set
 # CONFIG_RTC_DRV_MAX6902 is not set
 CONFIG_RTC_DRV_R9701=y
 # CONFIG_RTC_DRV_RS5C348 is not set
@@ -1137,10 +1150,7 @@ CONFIG_RTC_DRV_R9701=y
 # on-CPU RTC drivers
 #
 # CONFIG_RTC_DRV_SH is not set
-
-#
-# Userspace I/O
-#
+# CONFIG_DMADEVICES is not set
 # CONFIG_UIO is not set
 
 #
@@ -1155,14 +1165,11 @@ CONFIG_EXT2_FS=y
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
 # CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
-CONFIG_MINIX_FS=y
-# CONFIG_ROMFS_FS is not set
+CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
 # CONFIG_FUSE_FS is not set
@@ -1208,8 +1215,11 @@ CONFIG_TMPFS=y
 # CONFIG_EFS_FS is not set
 # CONFIG_CRAMFS is not set
 # CONFIG_VXFS_FS is not set
+CONFIG_MINIX_FS=y
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
@@ -1275,12 +1285,14 @@ CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 # CONFIG_PRINTK_TIME is not set
 CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
 # CONFIG_MAGIC_SYSRQ is not set
 # CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_FS=y
 # CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_SAMPLES is not set
 # CONFIG_SH_STANDARD_BIOS is not set
 CONFIG_EARLY_SCIF_CONSOLE=y
@@ -1295,48 +1307,81 @@ CONFIG_EARLY_PRINTK=y
 # CONFIG_SECURITY is not set
 # CONFIG_SECURITY_FILE_CAPABILITIES is not set
 CONFIG_CRYPTO=y
-# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Crypto core or helper
+#
 # CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
 # CONFIG_CRYPTO_HMAC is not set
 # CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_NULL is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
 # CONFIG_CRYPTO_MD4 is not set
 # CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
 # CONFIG_CRYPTO_SHA1 is not set
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
 # CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_ECB is not set
-# CONFIG_CRYPTO_CBC is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_XTS is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
 # CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
 # CONFIG_CRYPTO_CAST5 is not set
 # CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
 # CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_SEED is not set
 # CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
 # CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_TEST is not set
-# CONFIG_CRYPTO_AUTHENC is not set
 # CONFIG_CRYPTO_LZO is not set
 CONFIG_CRYPTO_HW=y
 # CONFIG_CRYPTO_DEV_HIFN_795X is not set
@@ -1345,8 +1390,10 @@ CONFIG_CRYPTO_HW=y
 # Library routines
 #
 CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
+CONFIG_CRC_T10DIF=y
 # CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
diff --git a/arch/sh/configs/rts7751r2dplus_defconfig b/arch/sh/configs/rts7751r2dplus_defconfig
index 0a6d3b9e648b..7d9fa6e9ded5 100644
--- a/arch/sh/configs/rts7751r2dplus_defconfig
+++ b/arch/sh/configs/rts7751r2dplus_defconfig
@@ -1,10 +1,11 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.24
-# Thu Feb  7 16:17:47 2008
+# Linux kernel version: 2.6.26
+# Wed Jul 30 01:59:18 2008
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
+CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig"
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
 CONFIG_GENERIC_BUG=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
@@ -20,6 +21,8 @@ CONFIG_LOCKDEP_SUPPORT=y
 # CONFIG_ARCH_HAS_ILOG2_U32 is not set
 # CONFIG_ARCH_HAS_ILOG2_U64 is not set
 CONFIG_ARCH_NO_VIRT_TO_BUS=y
+CONFIG_ARCH_SUPPORTS_AOUT=y
+CONFIG_IO_TRAPPED=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
@@ -36,17 +39,15 @@ CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_POSIX_MQUEUE is not set
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
 # CONFIG_AUDIT is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_CGROUPS is not set
-CONFIG_FAIR_GROUP_SCHED=y
-CONFIG_FAIR_USER_SCHED=y
-# CONFIG_FAIR_CGROUP_SCHED is not set
+# CONFIG_GROUP_SCHED is not set
 CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
 # CONFIG_BLK_DEV_INITRD is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
@@ -76,22 +77,31 @@ CONFIG_PROFILING=y
 # CONFIG_MARKERS is not set
 CONFIG_OPROFILE=y
 CONFIG_HAVE_OPROFILE=y
+# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
+# CONFIG_HAVE_IOREMAP_PROT is not set
 # CONFIG_HAVE_KPROBES is not set
+# CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_ARCH_TRACEHOOK is not set
+# CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+CONFIG_HAVE_CLK=y
 CONFIG_PROC_PAGE_MONITOR=y
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
 # CONFIG_MODULE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-# CONFIG_KMOD is not set
+CONFIG_KMOD=y
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -106,7 +116,6 @@ CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
 CONFIG_CLASSIC_RCU=y
-# CONFIG_PREEMPT_RCU is not set
 
 #
 # System type
@@ -116,6 +125,7 @@ CONFIG_CPU_SH4=y
 # CONFIG_CPU_SUBTYPE_SH7203 is not set
 # CONFIG_CPU_SUBTYPE_SH7206 is not set
 # CONFIG_CPU_SUBTYPE_SH7263 is not set
+# CONFIG_CPU_SUBTYPE_MXG is not set
 # CONFIG_CPU_SUBTYPE_SH7705 is not set
 # CONFIG_CPU_SUBTYPE_SH7706 is not set
 # CONFIG_CPU_SUBTYPE_SH7707 is not set
@@ -133,6 +143,7 @@ CONFIG_CPU_SH4=y
 CONFIG_CPU_SUBTYPE_SH7751R=y
 # CONFIG_CPU_SUBTYPE_SH7760 is not set
 # CONFIG_CPU_SUBTYPE_SH4_202 is not set
+# CONFIG_CPU_SUBTYPE_SH7723 is not set
 # CONFIG_CPU_SUBTYPE_SH7763 is not set
 # CONFIG_CPU_SUBTYPE_SH7770 is not set
 # CONFIG_CPU_SUBTYPE_SH7780 is not set
@@ -140,6 +151,7 @@ CONFIG_CPU_SUBTYPE_SH7751R=y
 # CONFIG_CPU_SUBTYPE_SHX3 is not set
 # CONFIG_CPU_SUBTYPE_SH7343 is not set
 # CONFIG_CPU_SUBTYPE_SH7722 is not set
+# CONFIG_CPU_SUBTYPE_SH7366 is not set
 # CONFIG_CPU_SUBTYPE_SH5_101 is not set
 # CONFIG_CPU_SUBTYPE_SH5_103 is not set
 
@@ -161,7 +173,9 @@ CONFIG_ARCH_POPULATES_NODE_MAP=y
 CONFIG_ARCH_SELECT_MEMORY_MODEL=y
 CONFIG_PAGE_SIZE_4KB=y
 # CONFIG_PAGE_SIZE_8KB is not set
+# CONFIG_PAGE_SIZE_16KB is not set
 # CONFIG_PAGE_SIZE_64KB is not set
+CONFIG_ENTRY_OFFSET=0x00001000
 CONFIG_SELECT_MEMORY_MODEL=y
 CONFIG_FLATMEM_MANUAL=y
 # CONFIG_DISCONTIGMEM_MANUAL is not set
@@ -170,6 +184,7 @@ CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 CONFIG_SPARSEMEM_STATIC=y
 # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_RESOURCES_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
@@ -256,7 +271,6 @@ CONFIG_HZ=250
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
-CONFIG_RCU_TRACE=y
 CONFIG_GUSA=y
 # CONFIG_GUSA_RB is not set
 
@@ -332,8 +346,6 @@ CONFIG_TCP_CONG_CUBIC=y
 CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
 # CONFIG_NETWORK_SECMARK is not set
 # CONFIG_NETFILTER is not set
 # CONFIG_IP_DCCP is not set
@@ -367,6 +379,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 #
 # CONFIG_CFG80211 is not set
 CONFIG_WIRELESS_EXT=y
+CONFIG_WIRELESS_EXT_SYSFS=y
 # CONFIG_MAC80211 is not set
 # CONFIG_IEEE80211 is not set
 # CONFIG_RFKILL is not set
@@ -383,6 +396,8 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=m
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_SYS_HYPERVISOR is not set
 # CONFIG_CONNECTOR is not set
 # CONFIG_MTD is not set
@@ -399,14 +414,18 @@ CONFIG_BLK_DEV=y
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_PHANTOM is not set
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_HP_ILO is not set
+CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
 #
@@ -466,6 +485,7 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_IPS is not set
 # CONFIG_SCSI_INITIO is not set
 # CONFIG_SCSI_INIA100 is not set
+# CONFIG_SCSI_MVSAS is not set
 # CONFIG_SCSI_STEX is not set
 # CONFIG_SCSI_SYM53C8XX_2 is not set
 # CONFIG_SCSI_IPR is not set
@@ -478,9 +498,13 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_NSP32 is not set
 # CONFIG_SCSI_DEBUG is not set
 # CONFIG_SCSI_SRP is not set
+# CONFIG_SCSI_DH is not set
 CONFIG_ATA=y
 # CONFIG_ATA_NONSTANDARD is not set
+CONFIG_SATA_PMP=y
 # CONFIG_SATA_AHCI is not set
+# CONFIG_SATA_SIL24 is not set
+CONFIG_ATA_SFF=y
 # CONFIG_SATA_SVW is not set
 # CONFIG_ATA_PIIX is not set
 # CONFIG_SATA_MV is not set
@@ -490,7 +514,6 @@ CONFIG_ATA=y
 # CONFIG_SATA_PROMISE is not set
 # CONFIG_SATA_SX4 is not set
 # CONFIG_SATA_SIL is not set
-# CONFIG_SATA_SIL24 is not set
 # CONFIG_SATA_SIS is not set
 # CONFIG_SATA_ULI is not set
 # CONFIG_SATA_VIA is not set
@@ -535,17 +558,21 @@ CONFIG_ATA=y
 # CONFIG_PATA_VIA is not set
 # CONFIG_PATA_WINBOND is not set
 CONFIG_PATA_PLATFORM=y
+# CONFIG_PATA_SCH is not set
 # CONFIG_MD is not set
 # CONFIG_FUSION is not set
 
 #
 # IEEE 1394 (FireWire) support
 #
+
+#
+# Enable only one of the two stacks, unless you know what you are doing
+#
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -564,6 +591,7 @@ CONFIG_MII=y
 # CONFIG_NET_VENDOR_3COM is not set
 # CONFIG_SMC91X is not set
 # CONFIG_ENC28J60 is not set
+# CONFIG_SMC911X is not set
 # CONFIG_NET_TULIP is not set
 # CONFIG_HP100 is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
@@ -599,7 +627,6 @@ CONFIG_NETDEV_1000=y
 # CONFIG_DL2K is not set
 # CONFIG_E1000 is not set
 # CONFIG_E1000E is not set
-# CONFIG_E1000E_ENABLED is not set
 # CONFIG_IP1000 is not set
 # CONFIG_IGB is not set
 # CONFIG_NS83820 is not set
@@ -609,12 +636,12 @@ CONFIG_NETDEV_1000=y
 # CONFIG_SIS190 is not set
 # CONFIG_SKGE is not set
 # CONFIG_SKY2 is not set
-# CONFIG_SK98LIN is not set
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
+# CONFIG_ATL1E is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
 # CONFIG_CHELSIO_T3 is not set
@@ -627,6 +654,7 @@ CONFIG_NETDEV_10000=y
 # CONFIG_MLX4_CORE is not set
 # CONFIG_TEHUTI is not set
 # CONFIG_BNX2X is not set
+# CONFIG_SFC is not set
 # CONFIG_TR is not set
 
 #
@@ -634,6 +662,7 @@ CONFIG_NETDEV_10000=y
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
 
 #
 # USB Network Adapters
@@ -690,9 +719,11 @@ CONFIG_INPUT=y
 # Character devices
 #
 CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
 CONFIG_VT_HW_CONSOLE_BINDING=y
+CONFIG_DEVKMEM=y
 # CONFIG_SERIAL_NONSTANDARD is not set
 # CONFIG_NOZOMI is not set
 
@@ -726,10 +757,6 @@ CONFIG_HW_RANDOM=y
 # CONFIG_TCG_TPM is not set
 CONFIG_DEVPORT=y
 # CONFIG_I2C is not set
-
-#
-# SPI support
-#
 CONFIG_SPI=y
 CONFIG_SPI_MASTER=y
 
@@ -765,6 +792,8 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_W83627HF is not set
 # CONFIG_SENSORS_W83627EHF is not set
 # CONFIG_HWMON_DEBUG_CHIP is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
 
 #
@@ -776,13 +805,24 @@ CONFIG_SSB_POSSIBLE=y
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 CONFIG_MFD_SM501=y
+# CONFIG_HTC_PASIC3 is not set
 
 #
 # Multimedia devices
 #
+
+#
+# Multimedia core support
+#
 # CONFIG_VIDEO_DEV is not set
 # CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
 CONFIG_DAB=y
 # CONFIG_USB_DABUSB is not set
 
@@ -802,8 +842,8 @@ CONFIG_FB_CFB_IMAGEBLIT=y
 # CONFIG_FB_SYS_FILLRECT is not set
 # CONFIG_FB_SYS_COPYAREA is not set
 # CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
 # CONFIG_FB_SYS_FOPS is not set
-CONFIG_FB_DEFERRED_IO=y
 # CONFIG_FB_SVGALIB is not set
 # CONFIG_FB_MACMODES is not set
 # CONFIG_FB_BACKLIGHT is not set
@@ -836,6 +876,8 @@ CONFIG_FB_DEFERRED_IO=y
 # CONFIG_FB_TRIDENT is not set
 # CONFIG_FB_ARK is not set
 # CONFIG_FB_PM3 is not set
+# CONFIG_FB_CARMINE is not set
+CONFIG_FB_SH_MOBILE_LCDC=m
 CONFIG_FB_SM501=y
 # CONFIG_FB_VIRTUAL is not set
 # CONFIG_BACKLIGHT_LCD_SUPPORT is not set
@@ -862,15 +904,7 @@ CONFIG_LOGO=y
 # CONFIG_LOGO_SUPERH_MONO is not set
 # CONFIG_LOGO_SUPERH_VGA16 is not set
 CONFIG_LOGO_SUPERH_CLUT224=y
-
-#
-# Sound
-#
 CONFIG_SOUND=y
-
-#
-# Advanced Linux Sound Architecture
-#
 CONFIG_SND=m
 CONFIG_SND_TIMER=m
 CONFIG_SND_PCM=m
@@ -884,21 +918,17 @@ CONFIG_SND_SUPPORT_OLD_API=y
 CONFIG_SND_VERBOSE_PROCFS=y
 # CONFIG_SND_VERBOSE_PRINTK is not set
 # CONFIG_SND_DEBUG is not set
-
-#
-# Generic devices
-#
+CONFIG_SND_VMASTER=y
 CONFIG_SND_MPU401_UART=m
 CONFIG_SND_OPL3_LIB=m
 CONFIG_SND_AC97_CODEC=m
+CONFIG_SND_DRIVERS=y
 # CONFIG_SND_DUMMY is not set
 # CONFIG_SND_MTPAV is not set
 # CONFIG_SND_SERIAL_U16550 is not set
 # CONFIG_SND_MPU401 is not set
-
-#
-# PCI devices
-#
+# CONFIG_SND_AC97_POWER_SAVE is not set
+CONFIG_SND_PCI=y
 # CONFIG_SND_AD1889 is not set
 # CONFIG_SND_ALS300 is not set
 # CONFIG_SND_ALI5451 is not set
@@ -907,6 +937,7 @@ CONFIG_SND_AC97_CODEC=m
 # CONFIG_SND_AU8810 is not set
 # CONFIG_SND_AU8820 is not set
 # CONFIG_SND_AU8830 is not set
+# CONFIG_SND_AW2 is not set
 # CONFIG_SND_AZT3328 is not set
 # CONFIG_SND_BT87X is not set
 # CONFIG_SND_CA0106 is not set
@@ -957,43 +988,13 @@ CONFIG_SND_AC97_CODEC=m
 # CONFIG_SND_VIRTUOSO is not set
 # CONFIG_SND_VX222 is not set
 CONFIG_SND_YMFPCI=m
-CONFIG_SND_YMFPCI_FIRMWARE_IN_KERNEL=y
-# CONFIG_SND_AC97_POWER_SAVE is not set
-
-#
-# SPI devices
-#
-
-#
-# SUPERH devices
-#
-
-#
-# USB devices
-#
+CONFIG_SND_SPI=y
+CONFIG_SND_SUPERH=y
+CONFIG_SND_USB=y
 # CONFIG_SND_USB_AUDIO is not set
 # CONFIG_SND_USB_CAIAQ is not set
-
-#
-# System on Chip audio support
-#
 # CONFIG_SND_SOC is not set
-
-#
-# SoC Audio support for SuperH
-#
-
-#
-# ALSA SoC audio for Freescale SOCs
-#
-
-#
-# Open Sound System
-#
 CONFIG_SOUND_PRIME=m
-# CONFIG_SOUND_TRIDENT is not set
-# CONFIG_SOUND_MSNDCLAS is not set
-# CONFIG_SOUND_MSNDPIN is not set
 CONFIG_AC97_BUS=m
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
@@ -1022,12 +1023,16 @@ CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
 CONFIG_USB_DEVICE_CLASS=y
 # CONFIG_USB_DYNAMIC_MINORS is not set
 # CONFIG_USB_OTG is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
 
 #
 # USB Host Controller Drivers
 #
+# CONFIG_USB_C67X00_HCD is not set
 # CONFIG_USB_EHCI_HCD is not set
 # CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
 CONFIG_USB_OHCI_HCD=y
 # CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
 # CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
@@ -1041,6 +1046,7 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y
 #
 # CONFIG_USB_ACM is not set
 # CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
 
 #
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
@@ -1060,7 +1066,9 @@ CONFIG_USB_STORAGE=y
 # CONFIG_USB_STORAGE_SDDR55 is not set
 # CONFIG_USB_STORAGE_JUMPSHOT is not set
 # CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_ONETOUCH is not set
 # CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
 CONFIG_USB_LIBUSUAL=y
 
 #
@@ -1096,9 +1104,12 @@ CONFIG_USB_LIBUSUAL=y
 # CONFIG_USB_LD is not set
 # CONFIG_USB_TRANCEVIBRATOR is not set
 # CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_ISIGHTFW is not set
 # CONFIG_USB_GADGET is not set
 # CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
 # CONFIG_INFINIBAND is not set
 CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
@@ -1118,6 +1129,8 @@ CONFIG_RTC_INTF_DEV=y
 #
 # SPI RTC drivers
 #
+# CONFIG_RTC_DRV_M41T94 is not set
+# CONFIG_RTC_DRV_DS1305 is not set
 # CONFIG_RTC_DRV_MAX6902 is not set
 CONFIG_RTC_DRV_R9701=y
 # CONFIG_RTC_DRV_RS5C348 is not set
@@ -1137,10 +1150,7 @@ CONFIG_RTC_DRV_R9701=y
 # on-CPU RTC drivers
 #
 # CONFIG_RTC_DRV_SH is not set
-
-#
-# Userspace I/O
-#
+# CONFIG_DMADEVICES is not set
 # CONFIG_UIO is not set
 
 #
@@ -1155,14 +1165,11 @@ CONFIG_EXT2_FS=y
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
 # CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
-CONFIG_MINIX_FS=y
-# CONFIG_ROMFS_FS is not set
+CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
 # CONFIG_FUSE_FS is not set
@@ -1208,8 +1215,11 @@ CONFIG_TMPFS=y
 # CONFIG_EFS_FS is not set
 # CONFIG_CRAMFS is not set
 # CONFIG_VXFS_FS is not set
+CONFIG_MINIX_FS=y
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
@@ -1275,12 +1285,14 @@ CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 # CONFIG_PRINTK_TIME is not set
 CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
 # CONFIG_MAGIC_SYSRQ is not set
 # CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_FS=y
 # CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_SAMPLES is not set
 # CONFIG_SH_STANDARD_BIOS is not set
 CONFIG_EARLY_SCIF_CONSOLE=y
@@ -1295,48 +1307,81 @@ CONFIG_EARLY_PRINTK=y
 # CONFIG_SECURITY is not set
 # CONFIG_SECURITY_FILE_CAPABILITIES is not set
 CONFIG_CRYPTO=y
-# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Crypto core or helper
+#
 # CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
 # CONFIG_CRYPTO_HMAC is not set
 # CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_NULL is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
 # CONFIG_CRYPTO_MD4 is not set
 # CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
 # CONFIG_CRYPTO_SHA1 is not set
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
 # CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_ECB is not set
-# CONFIG_CRYPTO_CBC is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_XTS is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
 # CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
 # CONFIG_CRYPTO_CAST5 is not set
 # CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
 # CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_SEED is not set
 # CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
 # CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_TEST is not set
-# CONFIG_CRYPTO_AUTHENC is not set
 # CONFIG_CRYPTO_LZO is not set
 CONFIG_CRYPTO_HW=y
 # CONFIG_CRYPTO_DEV_HIFN_795X is not set
@@ -1345,8 +1390,10 @@ CONFIG_CRYPTO_HW=y
 # Library routines
 #
 CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
+CONFIG_CRC_T10DIF=y
 # CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
diff --git a/arch/sh/configs/sdk7780_defconfig b/arch/sh/configs/sdk7780_defconfig
index bb9bcd6591ab..6d834f242905 100644
--- a/arch/sh/configs/sdk7780_defconfig
+++ b/arch/sh/configs/sdk7780_defconfig
@@ -1,10 +1,11 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.24-rc7
-# Tue Jan 22 11:34:03 2008
+# Linux kernel version: 2.6.26
+# Wed Jul 30 02:00:12 2008
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
+CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig"
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
 CONFIG_GENERIC_BUG=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
@@ -20,6 +21,7 @@ CONFIG_LOCKDEP_SUPPORT=y
 # CONFIG_ARCH_HAS_ILOG2_U32 is not set
 # CONFIG_ARCH_HAS_ILOG2_U64 is not set
 CONFIG_ARCH_NO_VIRT_TO_BUS=y
+CONFIG_ARCH_SUPPORTS_AOUT=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
@@ -38,24 +40,23 @@ CONFIG_POSIX_MQUEUE=y
 CONFIG_BSD_PROCESS_ACCT=y
 # CONFIG_BSD_PROCESS_ACCT_V3 is not set
 # CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
 # CONFIG_AUDIT is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=18
 # CONFIG_CGROUPS is not set
-CONFIG_FAIR_GROUP_SCHED=y
-CONFIG_FAIR_USER_SCHED=y
-# CONFIG_FAIR_CGROUP_SCHED is not set
+# CONFIG_GROUP_SCHED is not set
 CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
 CONFIG_RELAY=y
+# CONFIG_NAMESPACES is not set
 # CONFIG_BLK_DEV_INITRD is not set
 CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
 CONFIG_UID16=y
 CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
@@ -63,11 +64,13 @@ CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
 CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
 CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_VM_EVENT_COUNTERS=y
@@ -75,11 +78,24 @@ CONFIG_SLUB_DEBUG=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
+# CONFIG_HAVE_IOREMAP_PROT is not set
+# CONFIG_HAVE_KPROBES is not set
+# CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_ARCH_TRACEHOOK is not set
+# CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+CONFIG_HAVE_CLK=y
+CONFIG_PROC_PAGE_MONITOR=y
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
 CONFIG_MODULE_FORCE_UNLOAD=y
 # CONFIG_MODVERSIONS is not set
@@ -90,6 +106,7 @@ CONFIG_LBD=y
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -103,6 +120,7 @@ CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_CFQ is not set
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_CLASSIC_RCU=y
 
 #
 # System type
@@ -113,6 +131,7 @@ CONFIG_CPU_SH4A=y
 # CONFIG_CPU_SUBTYPE_SH7203 is not set
 # CONFIG_CPU_SUBTYPE_SH7206 is not set
 # CONFIG_CPU_SUBTYPE_SH7263 is not set
+# CONFIG_CPU_SUBTYPE_MXG is not set
 # CONFIG_CPU_SUBTYPE_SH7705 is not set
 # CONFIG_CPU_SUBTYPE_SH7706 is not set
 # CONFIG_CPU_SUBTYPE_SH7707 is not set
@@ -130,6 +149,7 @@ CONFIG_CPU_SH4A=y
 # CONFIG_CPU_SUBTYPE_SH7751R is not set
 # CONFIG_CPU_SUBTYPE_SH7760 is not set
 # CONFIG_CPU_SUBTYPE_SH4_202 is not set
+# CONFIG_CPU_SUBTYPE_SH7723 is not set
 # CONFIG_CPU_SUBTYPE_SH7763 is not set
 # CONFIG_CPU_SUBTYPE_SH7770 is not set
 CONFIG_CPU_SUBTYPE_SH7780=y
@@ -137,6 +157,7 @@ CONFIG_CPU_SUBTYPE_SH7780=y
 # CONFIG_CPU_SUBTYPE_SHX3 is not set
 # CONFIG_CPU_SUBTYPE_SH7343 is not set
 # CONFIG_CPU_SUBTYPE_SH7722 is not set
+# CONFIG_CPU_SUBTYPE_SH7366 is not set
 # CONFIG_CPU_SUBTYPE_SH5_101 is not set
 # CONFIG_CPU_SUBTYPE_SH5_103 is not set
 
@@ -159,7 +180,9 @@ CONFIG_ARCH_POPULATES_NODE_MAP=y
 CONFIG_ARCH_SELECT_MEMORY_MODEL=y
 CONFIG_PAGE_SIZE_4KB=y
 # CONFIG_PAGE_SIZE_8KB is not set
+# CONFIG_PAGE_SIZE_16KB is not set
 # CONFIG_PAGE_SIZE_64KB is not set
+CONFIG_ENTRY_OFFSET=0x00001000
 CONFIG_HUGETLB_PAGE_SIZE_64K=y
 # CONFIG_HUGETLB_PAGE_SIZE_256K is not set
 # CONFIG_HUGETLB_PAGE_SIZE_1MB is not set
@@ -174,6 +197,7 @@ CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 CONFIG_SPARSEMEM_STATIC=y
 # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 CONFIG_RESOURCES_64BIT=y
 CONFIG_ZONE_DMA_FLAG=0
@@ -205,7 +229,6 @@ CONFIG_CPU_HAS_FPU=y
 # CONFIG_SH_7780_SOLUTION_ENGINE is not set
 CONFIG_SH_SDK7780=y
 # CONFIG_SH_HIGHLANDER is not set
-# CONFIG_SH_SDK7780_STANDALONE is not set
 CONFIG_SH_SDK7780_BASE=y
 
 #
@@ -250,12 +273,13 @@ CONFIG_HZ_250=y
 # CONFIG_HZ_300 is not set
 # CONFIG_HZ_1000 is not set
 CONFIG_HZ=250
+# CONFIG_SCHED_HRTICK is not set
 # CONFIG_KEXEC is not set
 # CONFIG_CRASH_DUMP is not set
 # CONFIG_PREEMPT_NONE is not set
 # CONFIG_PREEMPT_VOLUNTARY is not set
 CONFIG_PREEMPT=y
-CONFIG_PREEMPT_BKL=y
+# CONFIG_PREEMPT_RCU is not set
 CONFIG_GUSA=y
 
 #
@@ -321,6 +345,7 @@ CONFIG_XFRM=y
 # CONFIG_XFRM_USER is not set
 # CONFIG_XFRM_SUB_POLICY is not set
 # CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
 # CONFIG_NET_KEY is not set
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
@@ -370,8 +395,10 @@ CONFIG_INET6_XFRM_MODE_TUNNEL=y
 # CONFIG_INET6_XFRM_MODE_BEET is not set
 # CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
 CONFIG_IPV6_SIT=y
+CONFIG_IPV6_NDISC_NODETYPE=y
 # CONFIG_IPV6_TUNNEL is not set
 # CONFIG_IPV6_MULTIPLE_TABLES is not set
+# CONFIG_IPV6_MROUTE is not set
 # CONFIG_NETWORK_SECMARK is not set
 # CONFIG_NETFILTER is not set
 # CONFIG_IP_DCCP is not set
@@ -397,7 +424,6 @@ CONFIG_NET_SCHED=y
 # CONFIG_NET_SCH_HTB is not set
 # CONFIG_NET_SCH_HFSC is not set
 # CONFIG_NET_SCH_PRIO is not set
-# CONFIG_NET_SCH_RR is not set
 # CONFIG_NET_SCH_RED is not set
 # CONFIG_NET_SCH_SFQ is not set
 # CONFIG_NET_SCH_TEQL is not set
@@ -405,7 +431,6 @@ CONFIG_NET_SCHED=y
 # CONFIG_NET_SCH_GRED is not set
 # CONFIG_NET_SCH_DSMARK is not set
 # CONFIG_NET_SCH_NETEM is not set
-# CONFIG_NET_SCH_INGRESS is not set
 
 #
 # Classification
@@ -417,9 +442,9 @@ CONFIG_NET_SCHED=y
 # CONFIG_NET_CLS_U32 is not set
 # CONFIG_NET_CLS_RSVP is not set
 # CONFIG_NET_CLS_RSVP6 is not set
+# CONFIG_NET_CLS_FLOW is not set
 # CONFIG_NET_EMATCH is not set
 # CONFIG_NET_CLS_ACT is not set
-# CONFIG_NET_CLS_POLICE is not set
 CONFIG_NET_SCH_FIFO=y
 
 #
@@ -427,6 +452,7 @@ CONFIG_NET_SCH_FIFO=y
 #
 # CONFIG_NET_PKTGEN is not set
 # CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
@@ -452,6 +478,8 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_DEBUG_DRIVER is not set
 # CONFIG_DEBUG_DEVRES is not set
 # CONFIG_SYS_HYPERVISOR is not set
@@ -475,16 +503,18 @@ CONFIG_BLK_DEV_LOOP=y
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
 # CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
 CONFIG_IDE=y
 CONFIG_IDE_MAX_HWIFS=4
 CONFIG_BLK_DEV_IDE=y
 
 #
-# Please see Documentation/ide.txt for help/info on IDE drives
+# Please see Documentation/ide/ide.txt for help/info on IDE drives
 #
 # CONFIG_BLK_DEV_IDE_SATA is not set
 CONFIG_BLK_DEV_IDEDISK=y
@@ -492,6 +522,7 @@ CONFIG_IDEDISK_MULTI_MODE=y
 # CONFIG_BLK_DEV_IDECS is not set
 # CONFIG_BLK_DEV_DELKIN is not set
 CONFIG_BLK_DEV_IDECD=y
+CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y
 # CONFIG_BLK_DEV_IDETAPE is not set
 # CONFIG_BLK_DEV_IDEFLOPPY is not set
 # CONFIG_BLK_DEV_IDESCSI is not set
@@ -501,14 +532,12 @@ CONFIG_IDE_PROC_FS=y
 #
 # IDE chipset support/bugfixes
 #
-CONFIG_IDE_GENERIC=y
 CONFIG_BLK_DEV_PLATFORM=y
 
 #
 # PCI IDE chipsets support
 #
 CONFIG_BLK_DEV_IDEPCI=y
-# CONFIG_IDEPCI_SHARE_IRQ is not set
 CONFIG_IDEPCI_PCIBUS_ORDER=y
 # CONFIG_BLK_DEV_OFFBOARD is not set
 CONFIG_BLK_DEV_GENERIC=y
@@ -518,10 +547,8 @@ CONFIG_BLK_DEV_GENERIC=y
 # CONFIG_BLK_DEV_AMD74XX is not set
 # CONFIG_BLK_DEV_CMD64X is not set
 # CONFIG_BLK_DEV_TRIFLEX is not set
-# CONFIG_BLK_DEV_CY82C693 is not set
 # CONFIG_BLK_DEV_CS5520 is not set
 # CONFIG_BLK_DEV_CS5530 is not set
-# CONFIG_BLK_DEV_HPT34X is not set
 # CONFIG_BLK_DEV_HPT366 is not set
 # CONFIG_BLK_DEV_JMICRON is not set
 # CONFIG_BLK_DEV_SC1200 is not set
@@ -537,10 +564,7 @@ CONFIG_BLK_DEV_GENERIC=y
 # CONFIG_BLK_DEV_TRM290 is not set
 # CONFIG_BLK_DEV_VIA82CXXX is not set
 # CONFIG_BLK_DEV_TC86C001 is not set
-# CONFIG_IDE_ARM is not set
 # CONFIG_BLK_DEV_IDEDMA is not set
-# CONFIG_IDE_ARCH_OBSOLETE_INIT is not set
-# CONFIG_BLK_DEV_HD is not set
 
 #
 # SCSI device support
@@ -600,6 +624,7 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_IPS is not set
 # CONFIG_SCSI_INITIO is not set
 # CONFIG_SCSI_INIA100 is not set
+# CONFIG_SCSI_MVSAS is not set
 # CONFIG_SCSI_STEX is not set
 # CONFIG_SCSI_SYM53C8XX_2 is not set
 # CONFIG_SCSI_IPR is not set
@@ -613,9 +638,13 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_DEBUG is not set
 # CONFIG_SCSI_SRP is not set
 # CONFIG_SCSI_LOWLEVEL_PCMCIA is not set
+# CONFIG_SCSI_DH is not set
 CONFIG_ATA=y
 # CONFIG_ATA_NONSTANDARD is not set
+CONFIG_SATA_PMP=y
 # CONFIG_SATA_AHCI is not set
+# CONFIG_SATA_SIL24 is not set
+CONFIG_ATA_SFF=y
 # CONFIG_SATA_SVW is not set
 # CONFIG_ATA_PIIX is not set
 # CONFIG_SATA_MV is not set
@@ -625,7 +654,6 @@ CONFIG_ATA=y
 # CONFIG_SATA_PROMISE is not set
 # CONFIG_SATA_SX4 is not set
 # CONFIG_SATA_SIL is not set
-# CONFIG_SATA_SIL24 is not set
 # CONFIG_SATA_SIS is not set
 # CONFIG_SATA_ULI is not set
 # CONFIG_SATA_VIA is not set
@@ -654,6 +682,7 @@ CONFIG_ATA=y
 # CONFIG_PATA_MPIIX is not set
 # CONFIG_PATA_OLDPIIX is not set
 # CONFIG_PATA_NETCELL is not set
+# CONFIG_PATA_NINJA32 is not set
 # CONFIG_PATA_NS87410 is not set
 # CONFIG_PATA_NS87415 is not set
 # CONFIG_PATA_OPTI is not set
@@ -670,6 +699,7 @@ CONFIG_ATA=y
 # CONFIG_PATA_VIA is not set
 # CONFIG_PATA_WINBOND is not set
 # CONFIG_PATA_PLATFORM is not set
+# CONFIG_PATA_SCH is not set
 CONFIG_MD=y
 # CONFIG_BLK_DEV_MD is not set
 CONFIG_BLK_DEV_DM=y
@@ -686,11 +716,14 @@ CONFIG_BLK_DEV_DM=y
 #
 # IEEE 1394 (FireWire) support
 #
+
+#
+# Enable only one of the two stacks, unless you know what you are doing
+#
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -708,6 +741,7 @@ CONFIG_MII=y
 # CONFIG_CASSINI is not set
 # CONFIG_NET_VENDOR_3COM is not set
 CONFIG_SMC91X=y
+# CONFIG_SMC911X is not set
 # CONFIG_NET_TULIP is not set
 # CONFIG_HP100 is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
@@ -726,6 +760,7 @@ CONFIG_SMC91X=y
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
 
 #
 # USB Network Adapters
@@ -743,7 +778,6 @@ CONFIG_SMC91X=y
 # CONFIG_PPP is not set
 # CONFIG_SLIP is not set
 # CONFIG_NET_FC is not set
-# CONFIG_SHAPER is not set
 CONFIG_NETCONSOLE=y
 # CONFIG_NETCONSOLE_DYNAMIC is not set
 CONFIG_NETPOLL=y
@@ -780,6 +814,7 @@ CONFIG_KEYBOARD_ATKBD=y
 # CONFIG_KEYBOARD_XTKBD is not set
 # CONFIG_KEYBOARD_NEWTON is not set
 # CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_SH_KEYSC is not set
 CONFIG_INPUT_MOUSE=y
 CONFIG_MOUSE_PS2=y
 CONFIG_MOUSE_PS2_ALPS=y
@@ -812,10 +847,13 @@ CONFIG_SERIO_LIBPS2=y
 # Character devices
 #
 CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
 # CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
 # CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_NOZOMI is not set
 
 #
 # Serial drivers
@@ -847,22 +885,20 @@ CONFIG_HW_RANDOM=y
 # CONFIG_SYNCLINK_CS is not set
 # CONFIG_CARDMAN_4000 is not set
 # CONFIG_CARDMAN_4040 is not set
+# CONFIG_IPWIRELESS is not set
 # CONFIG_RAW_DRIVER is not set
 # CONFIG_TCG_TPM is not set
 CONFIG_DEVPORT=y
 # CONFIG_I2C is not set
-
-#
-# SPI support
-#
 # CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
 # CONFIG_W1 is not set
 CONFIG_POWER_SUPPLY=y
 # CONFIG_POWER_SUPPLY_DEBUG is not set
 # CONFIG_PDA_POWER is not set
 # CONFIG_BATTERY_DS2760 is not set
 # CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
 
 #
@@ -870,8 +906,10 @@ CONFIG_POWER_SUPPLY=y
 #
 CONFIG_SSB_POSSIBLE=y
 CONFIG_SSB=y
+CONFIG_SSB_SPROM=y
 CONFIG_SSB_PCIHOST_POSSIBLE=y
 CONFIG_SSB_PCIHOST=y
+# CONFIG_SSB_B43_PCI_BRIDGE is not set
 CONFIG_SSB_PCMCIAHOST_POSSIBLE=y
 # CONFIG_SSB_PCMCIAHOST is not set
 # CONFIG_SSB_SILENT is not set
@@ -882,13 +920,24 @@ CONFIG_SSB_DRIVER_PCICORE=y
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
 
 #
 # Multimedia devices
 #
+
+#
+# Multimedia core support
+#
 # CONFIG_VIDEO_DEV is not set
 # CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
 # CONFIG_DAB is not set
 
 #
@@ -900,15 +949,15 @@ CONFIG_SSB_DRIVER_PCICORE=y
 CONFIG_FB=y
 # CONFIG_FIRMWARE_EDID is not set
 # CONFIG_FB_DDC is not set
-# CONFIG_FB_CFB_FILLRECT is not set
-# CONFIG_FB_CFB_COPYAREA is not set
-# CONFIG_FB_CFB_IMAGEBLIT is not set
+CONFIG_FB_CFB_FILLRECT=m
+CONFIG_FB_CFB_COPYAREA=m
+CONFIG_FB_CFB_IMAGEBLIT=m
 # CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
 # CONFIG_FB_SYS_FILLRECT is not set
 # CONFIG_FB_SYS_COPYAREA is not set
 # CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
 # CONFIG_FB_SYS_FOPS is not set
-CONFIG_FB_DEFERRED_IO=y
 # CONFIG_FB_SVGALIB is not set
 # CONFIG_FB_MACMODES is not set
 # CONFIG_FB_BACKLIGHT is not set
@@ -941,6 +990,8 @@ CONFIG_FB_DEFERRED_IO=y
 # CONFIG_FB_TRIDENT is not set
 # CONFIG_FB_ARK is not set
 # CONFIG_FB_PM3 is not set
+# CONFIG_FB_CARMINE is not set
+CONFIG_FB_SH_MOBILE_LCDC=m
 # CONFIG_FB_VIRTUAL is not set
 # CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
@@ -970,24 +1021,9 @@ CONFIG_LOGO_LINUX_CLUT224=y
 CONFIG_LOGO_SUPERH_MONO=y
 CONFIG_LOGO_SUPERH_VGA16=y
 CONFIG_LOGO_SUPERH_CLUT224=y
-
-#
-# Sound
-#
 CONFIG_SOUND=y
-
-#
-# Advanced Linux Sound Architecture
-#
 # CONFIG_SND is not set
-
-#
-# Open Sound System
-#
 CONFIG_SOUND_PRIME=y
-# CONFIG_SOUND_TRIDENT is not set
-# CONFIG_SOUND_MSNDCLAS is not set
-# CONFIG_SOUND_MSNDPIN is not set
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
 # CONFIG_HID_DEBUG is not set
@@ -1006,6 +1042,7 @@ CONFIG_USB_ARCH_HAS_OHCI=y
 CONFIG_USB_ARCH_HAS_EHCI=y
 CONFIG_USB=y
 CONFIG_USB_DEBUG=y
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
 
 #
 # Miscellaneous USB options
@@ -1014,15 +1051,18 @@ CONFIG_USB_DEVICEFS=y
 # CONFIG_USB_DEVICE_CLASS is not set
 # CONFIG_USB_DYNAMIC_MINORS is not set
 # CONFIG_USB_OTG is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
 
 #
 # USB Host Controller Drivers
 #
+# CONFIG_USB_C67X00_HCD is not set
 CONFIG_USB_EHCI_HCD=y
-# CONFIG_USB_EHCI_SPLIT_ISO is not set
 # CONFIG_USB_EHCI_ROOT_HUB_TT is not set
 # CONFIG_USB_EHCI_TT_NEWSCHED is not set
 # CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
 # CONFIG_USB_OHCI_HCD is not set
 # CONFIG_USB_UHCI_HCD is not set
 # CONFIG_USB_SL811_HCD is not set
@@ -1033,6 +1073,7 @@ CONFIG_USB_EHCI_HCD=y
 #
 # CONFIG_USB_ACM is not set
 CONFIG_USB_PRINTER=y
+# CONFIG_USB_WDM is not set
 
 #
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
@@ -1054,6 +1095,7 @@ CONFIG_USB_STORAGE=y
 # CONFIG_USB_STORAGE_ALAUDA is not set
 # CONFIG_USB_STORAGE_ONETOUCH is not set
 # CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
 # CONFIG_USB_LIBUSUAL is not set
 
 #
@@ -1067,10 +1109,6 @@ CONFIG_USB_MON=y
 # USB port drivers
 #
 # CONFIG_USB_USS720 is not set
-
-#
-# USB Serial Converter support
-#
 # CONFIG_USB_SERIAL is not set
 
 #
@@ -1096,16 +1134,10 @@ CONFIG_USB_MON=y
 # CONFIG_USB_TRANCEVIBRATOR is not set
 # CONFIG_USB_IOWARRIOR is not set
 # CONFIG_USB_TEST is not set
-
-#
-# USB DSL modem support
-#
-
-#
-# USB Gadget Support
-#
+# CONFIG_USB_ISIGHTFW is not set
 # CONFIG_USB_GADGET is not set
 # CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
 CONFIG_NEW_LEDS=y
 CONFIG_LEDS_CLASS=y
 
@@ -1117,13 +1149,11 @@ CONFIG_LEDS_CLASS=y
 # LED Triggers
 #
 # CONFIG_LEDS_TRIGGERS is not set
+# CONFIG_ACCESSIBILITY is not set
 # CONFIG_INFINIBAND is not set
 # CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
 # CONFIG_AUXDISPLAY is not set
-
-#
-# Userspace I/O
-#
 # CONFIG_UIO is not set
 
 #
@@ -1145,14 +1175,11 @@ CONFIG_FS_MBCACHE=y
 # CONFIG_JFS_FS is not set
 CONFIG_FS_POSIX_ACL=y
 # CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
-CONFIG_MINIX_FS=y
-# CONFIG_ROMFS_FS is not set
+CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
 # CONFIG_AUTOFS_FS is not set
 CONFIG_AUTOFS4_FS=y
 # CONFIG_FUSE_FS is not set
@@ -1203,8 +1230,11 @@ CONFIG_HUGETLB_PAGE=y
 # CONFIG_EFS_FS is not set
 # CONFIG_CRAMFS is not set
 # CONFIG_VXFS_FS is not set
+CONFIG_MINIX_FS=y
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
@@ -1212,19 +1242,16 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 # CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
+CONFIG_ROOT_NFS=y
 CONFIG_NFSD=y
 CONFIG_NFSD_V3=y
 # CONFIG_NFSD_V3_ACL is not set
 # CONFIG_NFSD_V4 is not set
-CONFIG_NFSD_TCP=y
-CONFIG_ROOT_NFS=y
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_EXPORTFS=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -1279,7 +1306,6 @@ CONFIG_NLS_ISO8859_15=y
 # CONFIG_NLS_KOI8_U is not set
 CONFIG_NLS_UTF8=y
 # CONFIG_DLM is not set
-# CONFIG_INSTRUMENTATION is not set
 
 #
 # Kernel hacking
@@ -1288,6 +1314,7 @@ CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 # CONFIG_PRINTK_TIME is not set
 CONFIG_ENABLE_WARN_DEPRECATED=y
 # CONFIG_ENABLE_MUST_CHECK is not set
+CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
 CONFIG_UNUSED_SYMBOLS=y
 # CONFIG_DEBUG_FS is not set
@@ -1295,10 +1322,14 @@ CONFIG_UNUSED_SYMBOLS=y
 CONFIG_DEBUG_KERNEL=y
 # CONFIG_DEBUG_SHIRQ is not set
 CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
 # CONFIG_SCHED_DEBUG is not set
 # CONFIG_SCHEDSTATS is not set
 CONFIG_TIMER_STATS=y
+# CONFIG_DEBUG_OBJECTS is not set
 # CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
 CONFIG_DEBUG_PREEMPT=y
 # CONFIG_DEBUG_RT_MUTEXES is not set
 # CONFIG_RT_MUTEX_TESTER is not set
@@ -1313,12 +1344,14 @@ CONFIG_DEBUG_PREEMPT=y
 CONFIG_DEBUG_BUGVERBOSE=y
 CONFIG_DEBUG_INFO=y
 # CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_FRAME_POINTER is not set
-# CONFIG_FORCED_INLINING is not set
 # CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_SAMPLES is not set
 CONFIG_SH_STANDARD_BIOS=y
@@ -1338,52 +1371,94 @@ CONFIG_DEBUG_STACKOVERFLOW=y
 # CONFIG_SECURITY is not set
 # CONFIG_SECURITY_FILE_CAPABILITIES is not set
 CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
 CONFIG_CRYPTO_ALGAPI=y
 # CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
 # CONFIG_CRYPTO_HMAC is not set
 # CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_NULL is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
 # CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
 # CONFIG_CRYPTO_SHA1 is not set
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
 # CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_ECB is not set
-# CONFIG_CRYPTO_CBC is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_XTS is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
 # CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
 # CONFIG_CRYPTO_CAST5 is not set
 # CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
 # CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_SALSA20 is not set
 # CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
 # CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_TEST is not set
-# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_LZO is not set
 CONFIG_CRYPTO_HW=y
+# CONFIG_CRYPTO_DEV_HIFN_795X is not set
 
 #
 # Library routines
 #
 CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
+CONFIG_CRC_T10DIF=y
 # CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
diff --git a/arch/sh/configs/se7206_defconfig b/arch/sh/configs/se7206_defconfig
index 6b34baa26eae..af15cbef12ba 100644
--- a/arch/sh/configs/se7206_defconfig
+++ b/arch/sh/configs/se7206_defconfig
@@ -1,10 +1,11 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc4
-# Tue Jun  3 20:27:08 2008
+# Linux kernel version: 2.6.26
+# Wed Jul 30 02:06:07 2008
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
+CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig"
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
 CONFIG_GENERIC_BUG=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
@@ -87,9 +88,14 @@ CONFIG_PROFILING=y
 # CONFIG_MARKERS is not set
 CONFIG_OPROFILE=y
 CONFIG_HAVE_OPROFILE=y
+# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
+# CONFIG_HAVE_IOREMAP_PROT is not set
 # CONFIG_HAVE_KPROBES is not set
 # CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_ARCH_TRACEHOOK is not set
 # CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+CONFIG_HAVE_CLK=y
 CONFIG_RT_MUTEXES=y
 CONFIG_TINY_SHMEM=y
 CONFIG_BASE_SMALL=0
@@ -99,12 +105,13 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-# CONFIG_KMOD is not set
+CONFIG_KMOD=y
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -175,7 +182,9 @@ CONFIG_ARCH_POPULATES_NODE_MAP=y
 CONFIG_ARCH_SELECT_MEMORY_MODEL=y
 CONFIG_PAGE_SIZE_4KB=y
 # CONFIG_PAGE_SIZE_8KB is not set
+# CONFIG_PAGE_SIZE_16KB is not set
 # CONFIG_PAGE_SIZE_64KB is not set
+CONFIG_ENTRY_OFFSET=0x00001000
 CONFIG_SELECT_MEMORY_MODEL=y
 CONFIG_FLATMEM_MANUAL=y
 # CONFIG_DISCONTIGMEM_MANUAL is not set
@@ -294,6 +303,7 @@ CONFIG_CF_BASE_ADDR=0xb8000000
 #
 # Executable file formats
 #
+CONFIG_BINFMT_ELF_FDPIC=y
 CONFIG_BINFMT_FLAT=y
 CONFIG_BINFMT_ZFLAT=y
 CONFIG_BINFMT_SHARED_FLAT=y
@@ -487,6 +497,7 @@ CONFIG_BLK_DEV_RAM_SIZE=4096
 # CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 CONFIG_EEPROM_93CX6=y
 # CONFIG_ENCLOSURE_SERVICES is not set
@@ -503,7 +514,6 @@ CONFIG_HAVE_IDE=y
 # CONFIG_ATA is not set
 # CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -516,6 +526,7 @@ CONFIG_MII=y
 # CONFIG_AX88796 is not set
 # CONFIG_STNIC is not set
 CONFIG_SMC91X=y
+# CONFIG_SMC911X is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
 # CONFIG_IBM_NEW_EMAC_RGMII is not set
 # CONFIG_IBM_NEW_EMAC_TAH is not set
@@ -583,6 +594,7 @@ CONFIG_SERIAL_CORE_CONSOLE=y
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 # CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
 
 #
@@ -594,6 +606,7 @@ CONFIG_SSB_POSSIBLE=y
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
 
@@ -625,10 +638,6 @@ CONFIG_SSB_POSSIBLE=y
 # Display device support
 #
 # CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Sound
-#
 # CONFIG_SOUND is not set
 # CONFIG_USB_SUPPORT is not set
 # CONFIG_MMC is not set
@@ -669,6 +678,7 @@ CONFIG_RTC_INTF_DEV=y
 # on-CPU RTC drivers
 #
 CONFIG_RTC_DRV_SH=y
+# CONFIG_DMADEVICES is not set
 # CONFIG_UIO is not set
 
 #
@@ -728,6 +738,7 @@ CONFIG_CONFIGFS_FS=y
 CONFIG_CRAMFS=y
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
 CONFIG_ROMFS_FS=y
@@ -738,13 +749,12 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 # CONFIG_NFS_V4 is not set
-# CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -776,6 +786,8 @@ CONFIG_DEBUG_FS=y
 CONFIG_DEBUG_KERNEL=y
 # CONFIG_DEBUG_SHIRQ is not set
 CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
 CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
@@ -795,6 +807,7 @@ CONFIG_DEBUG_BUGVERBOSE=y
 # CONFIG_DEBUG_INFO is not set
 CONFIG_DEBUG_VM=y
 # CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
 CONFIG_DEBUG_LIST=y
 # CONFIG_DEBUG_SG is not set
 CONFIG_FRAME_POINTER=y
@@ -860,6 +873,10 @@ CONFIG_CRYPTO_ALGAPI=y
 # CONFIG_CRYPTO_MD4 is not set
 # CONFIG_CRYPTO_MD5 is not set
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
 # CONFIG_CRYPTO_SHA1 is not set
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
@@ -899,6 +916,7 @@ CONFIG_BITREVERSE=y
 # CONFIG_GENERIC_FIND_FIRST_BIT is not set
 CONFIG_CRC_CCITT=y
 CONFIG_CRC16=y
+# CONFIG_CRC_T10DIF is not set
 CONFIG_CRC_ITU_T=y
 CONFIG_CRC32=y
 CONFIG_CRC7=y
diff --git a/arch/sh/configs/se7343_defconfig b/arch/sh/configs/se7343_defconfig
index 84c0075e2ad4..4e30b70377e2 100644
--- a/arch/sh/configs/se7343_defconfig
+++ b/arch/sh/configs/se7343_defconfig
@@ -1,40 +1,56 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.18
-# Tue Oct  3 11:46:17 2006
+# Linux kernel version: 2.6.26
+# Wed Jul 30 02:08:38 2008
 #
 CONFIG_SUPERH=y
+CONFIG_SUPERH32=y
+CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig"
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_BUG=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_IRQ_PROBE=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_ARCH_NO_VIRT_TO_BUS=y
+CONFIG_ARCH_SUPPORTS_AOUT=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
-# Code maturity level options
+# General setup
 #
 CONFIG_EXPERIMENTAL=y
 CONFIG_BROKEN_ON_SMP=y
 CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
 CONFIG_LOCALVERSION=""
 CONFIG_LOCALVERSION_AUTO=y
 # CONFIG_SWAP is not set
 CONFIG_SYSVIPC=y
-# CONFIG_IPC_NS is not set
+CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_POSIX_MQUEUE=y
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
-# CONFIG_UTS_NS is not set
 # CONFIG_AUDIT is not set
 # CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+CONFIG_GROUP_SCHED=y
+CONFIG_FAIR_GROUP_SCHED=y
+# CONFIG_RT_GROUP_SCHED is not set
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_RELAY is not set
-CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_NAMESPACES is not set
+# CONFIG_BLK_DEV_INITRD is not set
 CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
@@ -46,33 +62,47 @@ CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 # CONFIG_FUTEX is not set
+CONFIG_ANON_INODES=y
 # CONFIG_EPOLL is not set
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
 # CONFIG_SHMEM is not set
-CONFIG_SLAB=y
 CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
+# CONFIG_HAVE_IOREMAP_PROT is not set
+# CONFIG_HAVE_KPROBES is not set
+# CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_ARCH_TRACEHOOK is not set
+# CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+CONFIG_HAVE_CLK=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SLABINFO=y
 CONFIG_TINY_SHMEM=y
 CONFIG_BASE_SMALL=0
-# CONFIG_SLOB is not set
-
-#
-# Loadable module support
-#
 CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
 CONFIG_MODULE_FORCE_UNLOAD=y
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-# CONFIG_KMOD is not set
-
-#
-# Block layer
-#
+CONFIG_KMOD=y
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -86,62 +116,28 @@ CONFIG_DEFAULT_DEADLINE=y
 # CONFIG_DEFAULT_CFQ is not set
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="deadline"
+CONFIG_CLASSIC_RCU=y
 
 #
 # System type
 #
-CONFIG_SOLUTION_ENGINE=y
-# CONFIG_SH_SOLUTION_ENGINE is not set
-# CONFIG_SH_7751_SOLUTION_ENGINE is not set
-# CONFIG_SH_7300_SOLUTION_ENGINE is not set
-CONFIG_SH_7343_SOLUTION_ENGINE=y
-# CONFIG_SH_73180_SOLUTION_ENGINE is not set
-# CONFIG_SH_7751_SYSTEMH is not set
-# CONFIG_SH_HP6XX is not set
-# CONFIG_SH_EC3104 is not set
-# CONFIG_SH_SATURN is not set
-# CONFIG_SH_DREAMCAST is not set
-# CONFIG_SH_BIGSUR is not set
-# CONFIG_SH_MPC1211 is not set
-# CONFIG_SH_SH03 is not set
-# CONFIG_SH_SECUREEDGE5410 is not set
-# CONFIG_SH_HS7751RVOIP is not set
-# CONFIG_SH_7710VOIPGW is not set
-# CONFIG_SH_RTS7751R2D is not set
-# CONFIG_SH_R7780RP is not set
-# CONFIG_SH_EDOSK7705 is not set
-# CONFIG_SH_SH4202_MICRODEV is not set
-# CONFIG_SH_LANDISK is not set
-# CONFIG_SH_TITAN is not set
-# CONFIG_SH_SHMIN is not set
-# CONFIG_SH_UNKNOWN is not set
-
-#
-# Processor selection
-#
 CONFIG_CPU_SH4=y
 CONFIG_CPU_SH4A=y
 CONFIG_CPU_SH4AL_DSP=y
-
-#
-# SH-2 Processor Support
-#
-# CONFIG_CPU_SUBTYPE_SH7604 is not set
-
-#
-# SH-3 Processor Support
-#
-# CONFIG_CPU_SUBTYPE_SH7300 is not set
+# CONFIG_CPU_SUBTYPE_SH7619 is not set
+# CONFIG_CPU_SUBTYPE_SH7203 is not set
+# CONFIG_CPU_SUBTYPE_SH7206 is not set
+# CONFIG_CPU_SUBTYPE_SH7263 is not set
+# CONFIG_CPU_SUBTYPE_MXG is not set
 # CONFIG_CPU_SUBTYPE_SH7705 is not set
 # CONFIG_CPU_SUBTYPE_SH7706 is not set
 # CONFIG_CPU_SUBTYPE_SH7707 is not set
 # CONFIG_CPU_SUBTYPE_SH7708 is not set
 # CONFIG_CPU_SUBTYPE_SH7709 is not set
 # CONFIG_CPU_SUBTYPE_SH7710 is not set
-
-#
-# SH-4 Processor Support
-#
+# CONFIG_CPU_SUBTYPE_SH7712 is not set
+# CONFIG_CPU_SUBTYPE_SH7720 is not set
+# CONFIG_CPU_SUBTYPE_SH7721 is not set
 # CONFIG_CPU_SUBTYPE_SH7750 is not set
 # CONFIG_CPU_SUBTYPE_SH7091 is not set
 # CONFIG_CPU_SUBTYPE_SH7750R is not set
@@ -150,67 +146,89 @@ CONFIG_CPU_SH4AL_DSP=y
 # CONFIG_CPU_SUBTYPE_SH7751R is not set
 # CONFIG_CPU_SUBTYPE_SH7760 is not set
 # CONFIG_CPU_SUBTYPE_SH4_202 is not set
-
-#
-# ST40 Processor Support
-#
-# CONFIG_CPU_SUBTYPE_ST40STB1 is not set
-# CONFIG_CPU_SUBTYPE_ST40GX1 is not set
-
-#
-# SH-4A Processor Support
-#
+# CONFIG_CPU_SUBTYPE_SH7723 is not set
+# CONFIG_CPU_SUBTYPE_SH7763 is not set
 # CONFIG_CPU_SUBTYPE_SH7770 is not set
 # CONFIG_CPU_SUBTYPE_SH7780 is not set
-
-#
-# SH4AL-DSP Processor Support
-#
-# CONFIG_CPU_SUBTYPE_SH73180 is not set
+# CONFIG_CPU_SUBTYPE_SH7785 is not set
+# CONFIG_CPU_SUBTYPE_SHX3 is not set
 CONFIG_CPU_SUBTYPE_SH7343=y
+# CONFIG_CPU_SUBTYPE_SH7722 is not set
+# CONFIG_CPU_SUBTYPE_SH7366 is not set
+# CONFIG_CPU_SUBTYPE_SH5_101 is not set
+# CONFIG_CPU_SUBTYPE_SH5_103 is not set
 
 #
 # Memory management options
 #
+CONFIG_QUICKLIST=y
 CONFIG_MMU=y
 CONFIG_PAGE_OFFSET=0x80000000
 CONFIG_MEMORY_START=0x0c000000
 CONFIG_MEMORY_SIZE=0x01000000
-CONFIG_32BIT=y
+CONFIG_29BIT=y
 CONFIG_VSYSCALL=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_SPARSEMEM_ENABLE=y
+CONFIG_ARCH_SPARSEMEM_DEFAULT=y
+CONFIG_MAX_ACTIVE_REGIONS=1
+CONFIG_ARCH_POPULATES_NODE_MAP=y
+CONFIG_ARCH_SELECT_MEMORY_MODEL=y
+CONFIG_PAGE_SIZE_4KB=y
+# CONFIG_PAGE_SIZE_8KB is not set
+# CONFIG_PAGE_SIZE_16KB is not set
+# CONFIG_PAGE_SIZE_64KB is not set
+CONFIG_ENTRY_OFFSET=0x00001000
 CONFIG_SELECT_MEMORY_MODEL=y
 CONFIG_FLATMEM_MANUAL=y
 # CONFIG_DISCONTIGMEM_MANUAL is not set
 # CONFIG_SPARSEMEM_MANUAL is not set
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPARSEMEM_STATIC=y
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_NR_QUICK=2
 
 #
 # Cache configuration
 #
 # CONFIG_SH_DIRECT_MAPPED is not set
-# CONFIG_SH_WRITETHROUGH is not set
-# CONFIG_SH_OCRAM is not set
+CONFIG_CACHE_WRITEBACK=y
+# CONFIG_CACHE_WRITETHROUGH is not set
+# CONFIG_CACHE_OFF is not set
 
 #
 # Processor features
 #
 CONFIG_CPU_LITTLE_ENDIAN=y
-# CONFIG_SH_FPU is not set
+# CONFIG_CPU_BIG_ENDIAN is not set
 # CONFIG_SH_FPU_EMU is not set
 CONFIG_SH_DSP=y
 # CONFIG_SH_STORE_QUEUES is not set
 CONFIG_CPU_HAS_INTEVT=y
 CONFIG_CPU_HAS_SR_RB=y
+CONFIG_CPU_HAS_DSP=y
+
+#
+# Board support
+#
+CONFIG_SOLUTION_ENGINE=y
+CONFIG_SH_7343_SOLUTION_ENGINE=y
 
 #
-# Timer support
+# Timer and clock configuration
 #
 CONFIG_SH_TMU=y
+CONFIG_SH_TIMER_IRQ=16
 CONFIG_SH_PCLK_FREQ=27000000
+# CONFIG_TICK_ONESHOT is not set
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
 
 #
 # CPU Frequency scaling
@@ -225,57 +243,50 @@ CONFIG_SH_PCLK_FREQ=27000000
 #
 # Companion Chips
 #
-# CONFIG_HD6446X_SERIES is not set
+
+#
+# Additional SuperH Device Drivers
+#
 CONFIG_HEARTBEAT=y
+# CONFIG_PUSH_SWITCH is not set
 
 #
 # Kernel features
 #
 # CONFIG_HZ_100 is not set
 CONFIG_HZ_250=y
+# CONFIG_HZ_300 is not set
 # CONFIG_HZ_1000 is not set
 CONFIG_HZ=250
+# CONFIG_SCHED_HRTICK is not set
 # CONFIG_KEXEC is not set
-# CONFIG_SMP is not set
+# CONFIG_CRASH_DUMP is not set
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
+CONFIG_GUSA=y
 
 #
 # Boot options
 #
 CONFIG_ZERO_PAGE_OFFSET=0x00001000
 CONFIG_BOOT_LINK_OFFSET=0x00800000
-# CONFIG_UBC_WAKEUP is not set
 # CONFIG_CMDLINE_BOOL is not set
 
 #
 # Bus options
 #
-# CONFIG_PCI is not set
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
+# CONFIG_CF_ENABLER is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
 # CONFIG_PCCARD is not set
 
 #
-# PCI Hotplug Support
-#
-
-#
 # Executable file formats
 #
 CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_FLAT is not set
 # CONFIG_BINFMT_MISC is not set
 
 #
-# Power management options (EXPERIMENTAL)
-#
-# CONFIG_PM is not set
-
-#
 # Networking
 #
 CONFIG_NET=y
@@ -283,22 +294,20 @@ CONFIG_NET=y
 #
 # Networking options
 #
-# CONFIG_NETDEBUG is not set
 CONFIG_PACKET=y
 CONFIG_PACKET_MMAP=y
 CONFIG_UNIX=y
 CONFIG_XFRM=y
 # CONFIG_XFRM_USER is not set
 # CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
 # CONFIG_NET_KEY is not set
 CONFIG_INET=y
 # CONFIG_IP_MULTICAST is not set
 # CONFIG_IP_ADVANCED_ROUTER is not set
 CONFIG_IP_FIB_HASH=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
+# CONFIG_IP_PNP is not set
 # CONFIG_NET_IPIP is not set
 # CONFIG_NET_IPGRE is not set
 # CONFIG_ARPD is not set
@@ -310,29 +319,18 @@ CONFIG_SYN_COOKIES=y
 # CONFIG_INET_TUNNEL is not set
 CONFIG_INET_XFRM_MODE_TRANSPORT=y
 CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
 # CONFIG_INET_DIAG is not set
 # CONFIG_TCP_CONG_ADVANCED is not set
 CONFIG_TCP_CONG_CUBIC=y
 CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
 # CONFIG_NETWORK_SECMARK is not set
 # CONFIG_NETFILTER is not set
-
-#
-# DCCP Configuration (EXPERIMENTAL)
-#
 # CONFIG_IP_DCCP is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
 # CONFIG_IP_SCTP is not set
-
-#
-# TIPC Configuration (EXPERIMENTAL)
-#
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
@@ -345,10 +343,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
 # CONFIG_NET_SCHED is not set
 
 #
@@ -356,9 +350,20 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 #
 # CONFIG_NET_PKTGEN is not set
 # CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
 # CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
 
 #
 # Device Drivers
@@ -367,36 +372,34 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 #
 # Generic Driver Options
 #
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_SYS_HYPERVISOR is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
 # CONFIG_CONNECTOR is not set
-
-#
-# Memory Technology Devices (MTD)
-#
 CONFIG_MTD=y
 # CONFIG_MTD_DEBUG is not set
 CONFIG_MTD_CONCAT=y
 CONFIG_MTD_PARTITIONS=y
 # CONFIG_MTD_REDBOOT_PARTS is not set
 # CONFIG_MTD_CMDLINE_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
 
 #
 # User Modules And Translation Layers
 #
 CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
 # CONFIG_FTL is not set
 # CONFIG_NFTL is not set
 # CONFIG_INFTL is not set
 # CONFIG_RFD_FTL is not set
 # CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
 
 #
 # RAM/ROM/Flash chip drivers
@@ -422,13 +425,15 @@ CONFIG_MTD_CFI_UTIL=y
 CONFIG_MTD_RAM=y
 # CONFIG_MTD_ROM is not set
 # CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_OBSOLETE_CHIPS is not set
 
 #
 # Mapping drivers for chip access
 #
 # CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PHYSMAP is not set
+CONFIG_MTD_PHYSMAP=y
+CONFIG_MTD_PHYSMAP_START=0x0
+CONFIG_MTD_PHYSMAP_LEN=0
+CONFIG_MTD_PHYSMAP_BANKWIDTH=0
 # CONFIG_MTD_PLATRAM is not set
 
 #
@@ -445,130 +450,102 @@ CONFIG_MTD_RAM=y
 # CONFIG_MTD_DOC2000 is not set
 # CONFIG_MTD_DOC2001 is not set
 # CONFIG_MTD_DOC2001PLUS is not set
-
-#
-# NAND Flash Device Drivers
-#
 # CONFIG_MTD_NAND is not set
-
-#
-# OneNAND Flash Device Drivers
-#
 # CONFIG_MTD_ONENAND is not set
 
 #
-# Parallel port support
+# UBI - Unsorted block images
 #
+# CONFIG_MTD_UBI is not set
 # CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
+CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_COW_COMMON is not set
 # CONFIG_BLK_DEV_LOOP is not set
 # CONFIG_BLK_DEV_NBD is not set
 # CONFIG_BLK_DEV_RAM is not set
-# CONFIG_BLK_DEV_INITRD is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
+# CONFIG_BLK_DEV_HD is not set
+# CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
 #
 # SCSI device support
 #
 # CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
 # CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
 
 #
-# Serial ATA (prod) and Parallel ATA (experimental) drivers
+# SCSI support type (disk, tape, CD-ROM)
 #
-# CONFIG_ATA is not set
+# CONFIG_BLK_DEV_SD is not set
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
 
 #
-# Multi-device support (RAID and LVM)
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
 #
-# CONFIG_MD is not set
+CONFIG_SCSI_MULTI_LUN=y
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
 
 #
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
-#
-# Network device support
+# SCSI Transports
 #
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+# CONFIG_SCSI_LOWLEVEL is not set
+# CONFIG_SCSI_DH is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
 CONFIG_NETDEVICES=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
 # CONFIG_EQUALIZER is not set
 # CONFIG_TUN is not set
-
-#
-# PHY device support
-#
+# CONFIG_VETH is not set
 # CONFIG_PHYLIB is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
+# CONFIG_AX88796 is not set
 # CONFIG_STNIC is not set
 CONFIG_SMC91X=y
+# CONFIG_SMC911X is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_B44 is not set
+CONFIG_NETDEV_1000=y
+CONFIG_NETDEV_10000=y
 
 #
-# Ethernet (1000 Mbit)
-#
-
-#
-# Ethernet (10000 Mbit)
-#
-
-#
-# Token Ring devices
-#
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Wan interfaces
+# Wireless LAN
 #
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
 # CONFIG_WAN is not set
 # CONFIG_PPP is not set
 # CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
 # CONFIG_NETCONSOLE is not set
 # CONFIG_NETPOLL is not set
 # CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
 # CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
 # CONFIG_PHONE is not set
 
 #
@@ -576,13 +553,13 @@ CONFIG_SMC91X=y
 #
 CONFIG_INPUT=y
 # CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
 
 #
 # Userland interfaces
 #
 # CONFIG_INPUT_MOUSEDEV is not set
 # CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
 # CONFIG_INPUT_EVDEV is not set
 # CONFIG_INPUT_EVBUG is not set
 
@@ -592,6 +569,7 @@ CONFIG_INPUT=y
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
 # CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
 # CONFIG_INPUT_TOUCHSCREEN is not set
 # CONFIG_INPUT_MISC is not set
 
@@ -605,9 +583,11 @@ CONFIG_INPUT=y
 # Character devices
 #
 CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
 # CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
 # CONFIG_SERIAL_NONSTANDARD is not set
 
 #
@@ -626,156 +606,106 @@ CONFIG_SERIAL_CORE_CONSOLE=y
 # CONFIG_UNIX98_PTYS is not set
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
 # CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
 CONFIG_HW_RANDOM=y
-# CONFIG_GEN_RTC is not set
-# CONFIG_DTLK is not set
 # CONFIG_R3964 is not set
-
-#
-# Ftape, the floppy tape device driver
-#
 # CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
 # CONFIG_TCG_TPM is not set
-# CONFIG_TELCLOCK is not set
-
-#
-# I2C support
-#
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=y
-
-#
-# I2C Algorithms
-#
-# CONFIG_I2C_ALGOBIT is not set
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
-#
-# I2C Hardware Bus support
-#
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_PCA_ISA is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
-# CONFIG_SENSORS_EEPROM is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# SPI support
-#
+# CONFIG_I2C is not set
 # CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+# CONFIG_WATCHDOG is not set
 
 #
-# Dallas's 1-wire bus
+# Sonics Silicon Backplane
 #
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
 
 #
-# Hardware Monitoring support
+# Multifunction device drivers
 #
-# CONFIG_HWMON is not set
-# CONFIG_HWMON_VID is not set
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
 
 #
-# Misc devices
+# Multimedia devices
 #
 
 #
-# Multimedia devices
+# Multimedia core support
 #
 CONFIG_VIDEO_DEV=y
-CONFIG_VIDEO_V4L1=y
+CONFIG_VIDEO_V4L2_COMMON=y
+CONFIG_VIDEO_ALLOW_V4L1=y
 CONFIG_VIDEO_V4L1_COMPAT=y
-CONFIG_VIDEO_V4L2=y
+# CONFIG_DVB_CORE is not set
+CONFIG_VIDEO_MEDIA=y
 
 #
-# Video Capture Adapters
-#
-
-#
-# Video Capture Adapters
+# Multimedia drivers
 #
+# CONFIG_MEDIA_ATTACH is not set
+CONFIG_VIDEO_V4L2=y
+CONFIG_VIDEO_V4L1=y
+CONFIG_VIDEO_CAPTURE_DRIVERS=y
 # CONFIG_VIDEO_ADV_DEBUG is not set
 CONFIG_VIDEO_HELPER_CHIPS_AUTO=y
 # CONFIG_VIDEO_VIVI is not set
 # CONFIG_VIDEO_CPIA is not set
-# CONFIG_VIDEO_SAA5246A is not set
-# CONFIG_VIDEO_SAA5249 is not set
-# CONFIG_TUNER_3036 is not set
-
-#
-# Radio Adapters
-#
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
+# CONFIG_SOC_CAMERA is not set
+# CONFIG_VIDEO_SH_MOBILE_CEU is not set
+CONFIG_RADIO_ADAPTERS=y
+# CONFIG_DAB is not set
 
 #
 # Graphics support
 #
-CONFIG_FIRMWARE_EDID=y
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
 CONFIG_FB=y
-# CONFIG_FB_CFB_FILLRECT is not set
-# CONFIG_FB_CFB_COPYAREA is not set
-# CONFIG_FB_CFB_IMAGEBLIT is not set
+CONFIG_FIRMWARE_EDID=y
+# CONFIG_FB_DDC is not set
+CONFIG_FB_CFB_FILLRECT=m
+CONFIG_FB_CFB_COPYAREA=m
+CONFIG_FB_CFB_IMAGEBLIT=m
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
+# CONFIG_FB_SYS_FOPS is not set
+# CONFIG_FB_SVGALIB is not set
 # CONFIG_FB_MACMODES is not set
 # CONFIG_FB_BACKLIGHT is not set
 # CONFIG_FB_MODE_HELPERS is not set
 # CONFIG_FB_TILEBLITTING is not set
-# CONFIG_FB_EPSON1355 is not set
-# CONFIG_FB_S1D13XXX is not set
-# CONFIG_FB_VIRTUAL is not set
 
 #
-# Console display driver support
+# Frame buffer hardware drivers
 #
-CONFIG_DUMMY_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE is not set
-
-#
-# Logo configuration
-#
-# CONFIG_LOGO is not set
+# CONFIG_FB_S1D13XXX is not set
+CONFIG_FB_SH_MOBILE_LCDC=m
+# CONFIG_FB_VIRTUAL is not set
 # CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
-# Sound
+# Display device support
 #
-CONFIG_SOUND=y
+# CONFIG_DISPLAY_SUPPORT is not set
 
 #
-# Advanced Linux Sound Architecture
+# Console display driver support
 #
+CONFIG_DUMMY_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE is not set
+# CONFIG_LOGO is not set
+CONFIG_SOUND=y
 CONFIG_SND=y
 CONFIG_SND_TIMER=y
 CONFIG_SND_PCM=y
@@ -791,96 +721,49 @@ CONFIG_SND_SUPPORT_OLD_API=y
 CONFIG_SND_VERBOSE_PROCFS=y
 # CONFIG_SND_VERBOSE_PRINTK is not set
 # CONFIG_SND_DEBUG is not set
-
-#
-# Generic devices
-#
+CONFIG_SND_DRIVERS=y
 # CONFIG_SND_DUMMY is not set
 # CONFIG_SND_VIRMIDI is not set
 # CONFIG_SND_MTPAV is not set
 # CONFIG_SND_SERIAL_U16550 is not set
 # CONFIG_SND_MPU401 is not set
-
-#
-# Open Sound System
-#
+CONFIG_SND_SUPERH=y
+# CONFIG_SND_SOC is not set
 # CONFIG_SOUND_PRIME is not set
-
-#
-# USB support
-#
-# CONFIG_USB_ARCH_HAS_HCD is not set
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-# CONFIG_USB_ARCH_HAS_EHCI is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+# CONFIG_HID_DEBUG is not set
+# CONFIG_HIDRAW is not set
+# CONFIG_USB_SUPPORT is not set
 # CONFIG_MMC is not set
-
-#
-# LED devices
-#
+# CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
-
-#
-# LED drivers
-#
-
-#
-# LED Triggers
-#
-
-#
-# InfiniBand support
-#
-
-#
-# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
-#
-
-#
-# Real Time Clock
-#
+# CONFIG_ACCESSIBILITY is not set
 # CONFIG_RTC_CLASS is not set
-
-#
-# DMA Engine support
-#
-# CONFIG_DMA_ENGINE is not set
-
-#
-# DMA Clients
-#
-
-#
-# DMA Devices
-#
+# CONFIG_DMADEVICES is not set
+# CONFIG_UIO is not set
 
 #
 # File systems
 #
-# CONFIG_EXT2_FS is not set
-# CONFIG_EXT3_FS is not set
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+CONFIG_EXT3_FS_XATTR=y
+# CONFIG_EXT3_FS_POSIX_ACL is not set
+# CONFIG_EXT3_FS_SECURITY is not set
+# CONFIG_EXT4DEV_FS is not set
+CONFIG_JBD=y
+CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
 # CONFIG_XFS_FS is not set
 # CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
+# CONFIG_DNOTIFY is not set
 # CONFIG_INOTIFY is not set
 # CONFIG_QUOTA is not set
-# CONFIG_DNOTIFY is not set
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
 # CONFIG_FUSE_FS is not set
@@ -909,7 +792,6 @@ CONFIG_TMPFS=y
 # CONFIG_TMPFS_POSIX_ACL is not set
 # CONFIG_HUGETLBFS is not set
 # CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
 # CONFIG_CONFIGFS_FS is not set
 
 #
@@ -922,35 +804,34 @@ CONFIG_RAMFS=y
 # CONFIG_BEFS_FS is not set
 # CONFIG_BFS_FS is not set
 # CONFIG_EFS_FS is not set
-# CONFIG_JFFS_FS is not set
 CONFIG_JFFS2_FS=y
 CONFIG_JFFS2_FS_DEBUG=0
 CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
 # CONFIG_JFFS2_SUMMARY is not set
 # CONFIG_JFFS2_FS_XATTR is not set
 # CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
 CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
 CONFIG_JFFS2_RTIME=y
 # CONFIG_JFFS2_RUBIN is not set
-# CONFIG_CRAMFS is not set
+CONFIG_CRAMFS=y
 # CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
+CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 # CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
 CONFIG_NFSD=y
 # CONFIG_NFSD_V3 is not set
-# CONFIG_NFSD_TCP is not set
-CONFIG_ROOT_NFS=y
+# CONFIG_NFSD_V4 is not set
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_EXPORTFS=y
@@ -963,56 +844,136 @@ CONFIG_SUNRPC=y
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
 # CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
 
 #
 # Partition Types
 #
 # CONFIG_PARTITION_ADVANCED is not set
 CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
 # CONFIG_NLS is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
+# CONFIG_DLM is not set
 
 #
 # Kernel hacking
 #
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 # CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
 # CONFIG_MAGIC_SYSRQ is not set
 # CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
-CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_DEBUG_BUGVERBOSE is not set
-# CONFIG_DEBUG_FS is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_SAMPLES is not set
 # CONFIG_SH_STANDARD_BIOS is not set
-# CONFIG_EARLY_SCIF_CONSOLE is not set
-# CONFIG_KGDB is not set
+CONFIG_EARLY_SCIF_CONSOLE=y
+CONFIG_EARLY_SCIF_CONSOLE_PORT=0xffe00000
+CONFIG_EARLY_PRINTK=y
+# CONFIG_SH_KGDB is not set
 
 #
 # Security options
 #
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+# CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_MD4 is not set
+# CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
 
 #
-# Cryptographic options
+# Compression
 #
-# CONFIG_CRYPTO is not set
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_LZO is not set
+CONFIG_CRYPTO_HW=y
 
 #
 # Library routines
 #
+CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
+# CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
 # CONFIG_LIBCRC32C is not set
 CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
diff --git a/arch/sh/configs/se7619_defconfig b/arch/sh/configs/se7619_defconfig
index 3a3c3c1f507d..80c1c72edb56 100644
--- a/arch/sh/configs/se7619_defconfig
+++ b/arch/sh/configs/se7619_defconfig
@@ -1,9 +1,11 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.22-rc4
-# Fri Jun 15 19:43:06 2007
+# Linux kernel version: 2.6.26
+# Wed Jul 30 02:12:32 2008
 #
 CONFIG_SUPERH=y
+CONFIG_SUPERH32=y
+CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig"
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
 CONFIG_GENERIC_BUG=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
@@ -17,27 +19,26 @@ CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 # CONFIG_ARCH_HAS_ILOG2_U32 is not set
 # CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_ARCH_NO_VIRT_TO_BUS=y
+CONFIG_ARCH_SUPPORTS_AOUT=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
-# Code maturity level options
+# General setup
 #
 CONFIG_EXPERIMENTAL=y
 CONFIG_BROKEN_ON_SMP=y
 CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
 CONFIG_LOCALVERSION=""
 # CONFIG_LOCALVERSION_AUTO is not set
 # CONFIG_SYSVIPC is not set
 # CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_UTS_NS is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-CONFIG_SYSFS_DEPRECATED=y
+# CONFIG_CGROUPS is not set
+# CONFIG_GROUP_SCHED is not set
 # CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
 # CONFIG_BLK_DEV_INITRD is not set
 CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 CONFIG_SYSCTL=y
@@ -49,6 +50,7 @@ CONFIG_EMBEDDED=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 # CONFIG_ELF_CORE is not set
+CONFIG_COMPAT_BRK=y
 # CONFIG_BASE_FULL is not set
 # CONFIG_FUTEX is not set
 CONFIG_ANON_INODES=y
@@ -60,20 +62,26 @@ CONFIG_EVENTFD=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
+# CONFIG_HAVE_IOREMAP_PROT is not set
+# CONFIG_HAVE_KPROBES is not set
+# CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_ARCH_TRACEHOOK is not set
+# CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+CONFIG_HAVE_CLK=y
+CONFIG_SLABINFO=y
 CONFIG_TINY_SHMEM=y
 CONFIG_BASE_SMALL=1
-
-#
-# Loadable module support
-#
 # CONFIG_MODULES is not set
-
-#
-# Block layer
-#
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -87,14 +95,17 @@ CONFIG_IOSCHED_NOOP=y
 # CONFIG_DEFAULT_CFQ is not set
 CONFIG_DEFAULT_NOOP=y
 CONFIG_DEFAULT_IOSCHED="noop"
+CONFIG_CLASSIC_RCU=y
 
 #
 # System type
 #
 CONFIG_CPU_SH2=y
 CONFIG_CPU_SUBTYPE_SH7619=y
+# CONFIG_CPU_SUBTYPE_SH7203 is not set
 # CONFIG_CPU_SUBTYPE_SH7206 is not set
-# CONFIG_CPU_SUBTYPE_SH7300 is not set
+# CONFIG_CPU_SUBTYPE_SH7263 is not set
+# CONFIG_CPU_SUBTYPE_MXG is not set
 # CONFIG_CPU_SUBTYPE_SH7705 is not set
 # CONFIG_CPU_SUBTYPE_SH7706 is not set
 # CONFIG_CPU_SUBTYPE_SH7707 is not set
@@ -102,6 +113,8 @@ CONFIG_CPU_SUBTYPE_SH7619=y
 # CONFIG_CPU_SUBTYPE_SH7709 is not set
 # CONFIG_CPU_SUBTYPE_SH7710 is not set
 # CONFIG_CPU_SUBTYPE_SH7712 is not set
+# CONFIG_CPU_SUBTYPE_SH7720 is not set
+# CONFIG_CPU_SUBTYPE_SH7721 is not set
 # CONFIG_CPU_SUBTYPE_SH7750 is not set
 # CONFIG_CPU_SUBTYPE_SH7091 is not set
 # CONFIG_CPU_SUBTYPE_SH7750R is not set
@@ -110,14 +123,17 @@ CONFIG_CPU_SUBTYPE_SH7619=y
 # CONFIG_CPU_SUBTYPE_SH7751R is not set
 # CONFIG_CPU_SUBTYPE_SH7760 is not set
 # CONFIG_CPU_SUBTYPE_SH4_202 is not set
-# CONFIG_CPU_SUBTYPE_ST40STB1 is not set
-# CONFIG_CPU_SUBTYPE_ST40GX1 is not set
+# CONFIG_CPU_SUBTYPE_SH7723 is not set
+# CONFIG_CPU_SUBTYPE_SH7763 is not set
 # CONFIG_CPU_SUBTYPE_SH7770 is not set
 # CONFIG_CPU_SUBTYPE_SH7780 is not set
 # CONFIG_CPU_SUBTYPE_SH7785 is not set
-# CONFIG_CPU_SUBTYPE_SH73180 is not set
+# CONFIG_CPU_SUBTYPE_SHX3 is not set
 # CONFIG_CPU_SUBTYPE_SH7343 is not set
 # CONFIG_CPU_SUBTYPE_SH7722 is not set
+# CONFIG_CPU_SUBTYPE_SH7366 is not set
+# CONFIG_CPU_SUBTYPE_SH5_101 is not set
+# CONFIG_CPU_SUBTYPE_SH5_103 is not set
 
 #
 # Memory management options
@@ -126,6 +142,7 @@ CONFIG_QUICKLIST=y
 CONFIG_PAGE_OFFSET=0x00000000
 CONFIG_MEMORY_START=0x0c000000
 CONFIG_MEMORY_SIZE=0x04000000
+CONFIG_29BIT=y
 CONFIG_ARCH_FLATMEM_ENABLE=y
 CONFIG_ARCH_SPARSEMEM_ENABLE=y
 CONFIG_ARCH_SPARSEMEM_DEFAULT=y
@@ -134,7 +151,9 @@ CONFIG_ARCH_POPULATES_NODE_MAP=y
 CONFIG_ARCH_SELECT_MEMORY_MODEL=y
 CONFIG_PAGE_SIZE_4KB=y
 # CONFIG_PAGE_SIZE_8KB is not set
+# CONFIG_PAGE_SIZE_16KB is not set
 # CONFIG_PAGE_SIZE_64KB is not set
+CONFIG_ENTRY_OFFSET=0x00001000
 CONFIG_SELECT_MEMORY_MODEL=y
 CONFIG_FLATMEM_MANUAL=y
 # CONFIG_DISCONTIGMEM_MANUAL is not set
@@ -142,6 +161,8 @@ CONFIG_FLATMEM_MANUAL=y
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 CONFIG_SPARSEMEM_STATIC=y
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_RESOURCES_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
@@ -151,7 +172,9 @@ CONFIG_NR_QUICK=2
 # Cache configuration
 #
 # CONFIG_SH_DIRECT_MAPPED is not set
-CONFIG_SH_WRITETHROUGH=y
+# CONFIG_CACHE_WRITEBACK is not set
+CONFIG_CACHE_WRITETHROUGH=y
+# CONFIG_CACHE_OFF is not set
 
 #
 # Processor features
@@ -159,8 +182,6 @@ CONFIG_SH_WRITETHROUGH=y
 # CONFIG_CPU_LITTLE_ENDIAN is not set
 CONFIG_CPU_BIG_ENDIAN=y
 # CONFIG_SH_FPU_EMU is not set
-# CONFIG_SH_DSP is not set
-CONFIG_CPU_HAS_IPR_IRQ=y
 
 #
 # Board support
@@ -185,7 +206,6 @@ CONFIG_SH_CLK_MD=5
 #
 # DMA support
 #
-# CONFIG_SH_DMA is not set
 
 #
 # Companion Chips
@@ -205,11 +225,13 @@ CONFIG_HZ_100=y
 # CONFIG_HZ_300 is not set
 # CONFIG_HZ_1000 is not set
 CONFIG_HZ=100
+# CONFIG_SCHED_HRTICK is not set
 # CONFIG_KEXEC is not set
 # CONFIG_CRASH_DUMP is not set
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
+CONFIG_GUSA=y
 
 #
 # Boot options
@@ -221,15 +243,13 @@ CONFIG_BOOT_LINK_OFFSET=0x00800000
 #
 # Bus options
 #
+# CONFIG_CF_ENABLER is not set
 # CONFIG_ARCH_SUPPORTS_MSI is not set
 
 #
-# PCCARD (PCMCIA/CardBus) support
-#
-
-#
 # Executable file formats
 #
+CONFIG_BINFMT_ELF_FDPIC=y
 CONFIG_BINFMT_FLAT=y
 CONFIG_BINFMT_ZFLAT=y
 # CONFIG_BINFMT_SHARED_FLAT is not set
@@ -250,10 +270,6 @@ CONFIG_BINFMT_ZFLAT=y
 # CONFIG_STANDALONE is not set
 # CONFIG_PREVENT_FIRMWARE_BUILD is not set
 # CONFIG_SYS_HYPERVISOR is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
 CONFIG_MTD=y
 # CONFIG_MTD_DEBUG is not set
 CONFIG_MTD_CONCAT=y
@@ -263,6 +279,7 @@ CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
 # CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set
 # CONFIG_MTD_REDBOOT_PARTS_READONLY is not set
 # CONFIG_MTD_CMDLINE_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
 
 #
 # User Modules And Translation Layers
@@ -275,6 +292,7 @@ CONFIG_MTD_BLOCK=y
 # CONFIG_INFTL is not set
 # CONFIG_RFD_FTL is not set
 # CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
 
 #
 # RAM/ROM/Flash chip drivers
@@ -334,29 +352,17 @@ CONFIG_MTD_PHYSMAP_BANKWIDTH=2
 # UBI - Unsorted block images
 #
 # CONFIG_MTD_UBI is not set
-
-#
-# Parallel port support
-#
 # CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-# CONFIG_PNPACPI is not set
-
-#
-# Block devices
-#
+CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_COW_COMMON is not set
 # CONFIG_BLK_DEV_LOOP is not set
 # CONFIG_BLK_DEV_RAM is not set
 # CONFIG_CDROM_PKTCDVD is not set
-
-#
-# Misc devices
-#
-# CONFIG_BLINK is not set
+# CONFIG_BLK_DEV_HD is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
 #
@@ -364,21 +370,10 @@ CONFIG_MTD_PHYSMAP_BANKWIDTH=2
 #
 # CONFIG_RAID_ATTRS is not set
 # CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
 # CONFIG_SCSI_NETLINK is not set
 # CONFIG_ATA is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
 # CONFIG_MD is not set
-
-#
-# ISDN subsystem
-#
-
-#
-# Telephony Support
-#
 # CONFIG_PHONE is not set
 
 #
@@ -386,13 +381,13 @@ CONFIG_MTD_PHYSMAP_BANKWIDTH=2
 #
 CONFIG_INPUT=y
 # CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
 
 #
 # Userland interfaces
 #
 # CONFIG_INPUT_MOUSEDEV is not set
 # CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
 # CONFIG_INPUT_EVDEV is not set
 # CONFIG_INPUT_EVBUG is not set
 
@@ -416,6 +411,7 @@ CONFIG_INPUT=y
 # Character devices
 #
 # CONFIG_VT is not set
+CONFIG_DEVKMEM=y
 # CONFIG_SERIAL_NONSTANDARD is not set
 
 #
@@ -433,123 +429,84 @@ CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
 # CONFIG_UNIX98_PTYS is not set
 # CONFIG_LEGACY_PTYS is not set
-
-#
-# IPMI
-#
 # CONFIG_IPMI_HANDLER is not set
-# CONFIG_WATCHDOG is not set
 # CONFIG_HW_RANDOM is not set
 # CONFIG_R3964 is not set
 # CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
 # CONFIG_TCG_TPM is not set
 # CONFIG_I2C is not set
-
-#
-# SPI support
-#
 # CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+# CONFIG_WATCHDOG is not set
 
 #
-# Dallas's 1-wire bus
+# Sonics Silicon Backplane
 #
-# CONFIG_W1 is not set
-# CONFIG_HWMON is not set
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
 
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
 
 #
 # Multimedia devices
 #
+
+#
+# Multimedia core support
+#
 # CONFIG_VIDEO_DEV is not set
-CONFIG_DAB=y
+# CONFIG_VIDEO_MEDIA is not set
 
 #
-# Graphics support
+# Multimedia drivers
 #
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+CONFIG_DAB=y
 
 #
-# Display device support
+# Graphics support
 #
-# CONFIG_DISPLAY_SUPPORT is not set
 # CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
 # CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
-# Sound
+# Display device support
 #
+# CONFIG_DISPLAY_SUPPORT is not set
 # CONFIG_SOUND is not set
-
-#
-# HID Devices
-#
+CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
 # CONFIG_HID_DEBUG is not set
-
-#
-# USB support
-#
-# CONFIG_USB_ARCH_HAS_HCD is not set
+# CONFIG_HIDRAW is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
 # CONFIG_USB_ARCH_HAS_OHCI is not set
 # CONFIG_USB_ARCH_HAS_EHCI is not set
+# CONFIG_USB is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
 
 #
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
 #
-
-#
-# USB Gadget Support
-#
 # CONFIG_USB_GADGET is not set
 # CONFIG_MMC is not set
-
-#
-# LED devices
-#
+# CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
-
-#
-# LED drivers
-#
-
-#
-# LED Triggers
-#
-
-#
-# InfiniBand support
-#
-
-#
-# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
-#
-
-#
-# Real Time Clock
-#
+# CONFIG_ACCESSIBILITY is not set
 # CONFIG_RTC_CLASS is not set
-
-#
-# DMA Engine support
-#
-# CONFIG_DMA_ENGINE is not set
-
-#
-# DMA Clients
-#
-
-#
-# DMA Devices
-#
+# CONFIG_DMADEVICES is not set
+# CONFIG_UIO is not set
 
 #
 # File systems
@@ -561,12 +518,9 @@ CONFIG_HID=y
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
 # CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-CONFIG_ROMFS_FS=y
+# CONFIG_DNOTIFY is not set
 # CONFIG_INOTIFY is not set
 # CONFIG_QUOTA is not set
-# CONFIG_DNOTIFY is not set
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
 # CONFIG_FUSE_FS is not set
@@ -592,7 +546,6 @@ CONFIG_PROC_SYSCTL=y
 # CONFIG_SYSFS is not set
 # CONFIG_TMPFS is not set
 # CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
 
 #
 # Miscellaneous filesystems
@@ -607,8 +560,11 @@ CONFIG_RAMFS=y
 # CONFIG_JFFS2_FS is not set
 # CONFIG_CRAMFS is not set
 # CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
+CONFIG_ROMFS_FS=y
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
 
@@ -617,28 +573,23 @@ CONFIG_RAMFS=y
 #
 # CONFIG_PARTITION_ADVANCED is not set
 CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
 # CONFIG_NLS is not set
 
 #
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
 # Kernel hacking
 #
 CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 # CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
 # CONFIG_ENABLE_MUST_CHECK is not set
+CONFIG_FRAME_WARN=1024
 # CONFIG_MAGIC_SYSRQ is not set
 # CONFIG_UNUSED_SYMBOLS is not set
 # CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_SAMPLES is not set
 # CONFIG_SH_STANDARD_BIOS is not set
 # CONFIG_EARLY_SCIF_CONSOLE is not set
 
@@ -646,20 +597,20 @@ CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 # Security options
 #
 # CONFIG_KEYS is not set
-
-#
-# Cryptographic options
-#
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
 # CONFIG_CRYPTO is not set
 
 #
 # Library routines
 #
 CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
 # CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
 # CONFIG_LIBCRC32C is not set
 CONFIG_ZLIB_INFLATE=y
 CONFIG_HAS_IOMEM=y
diff --git a/arch/sh/configs/se7712_defconfig b/arch/sh/configs/se7712_defconfig
index 2dd83af988f0..7be79cd04eb0 100644
--- a/arch/sh/configs/se7712_defconfig
+++ b/arch/sh/configs/se7712_defconfig
@@ -1,53 +1,57 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.21-rc4
-# Wed Mar 28 10:19:02 2007
+# Linux kernel version: 2.6.26-rc6
+# Wed Jun 18 16:36:08 2008
 #
 CONFIG_SUPERH=y
+CONFIG_SUPERH32=y
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_IRQ_PROBE=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
-# CONFIG_GENERIC_TIME is not set
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 # CONFIG_ARCH_HAS_ILOG2_U32 is not set
 # CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_ARCH_NO_VIRT_TO_BUS=y
+CONFIG_ARCH_SUPPORTS_AOUT=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
-# Code maturity level options
+# General setup
 #
 CONFIG_EXPERIMENTAL=y
 CONFIG_BROKEN_ON_SMP=y
 CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
 CONFIG_LOCALVERSION=""
 # CONFIG_LOCALVERSION_AUTO is not set
 # CONFIG_SWAP is not set
 CONFIG_SYSVIPC=y
-# CONFIG_IPC_NS is not set
 CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_POSIX_MQUEUE=y
 CONFIG_BSD_PROCESS_ACCT=y
 # CONFIG_BSD_PROCESS_ACCT_V3 is not set
 # CONFIG_TASKSTATS is not set
-# CONFIG_UTS_NS is not set
 # CONFIG_AUDIT is not set
 # CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+# CONFIG_GROUP_SCHED is not set
 CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
 # CONFIG_BLK_DEV_INITRD is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
 CONFIG_UID16=y
 CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
@@ -55,33 +59,41 @@ CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 # CONFIG_BUG is not set
 CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
 # CONFIG_BASE_FULL is not set
 CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
 # CONFIG_SHMEM is not set
-CONFIG_SLAB=y
 CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_HAVE_KPROBES is not set
+# CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_DMA_ATTRS is not set
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 CONFIG_TINY_SHMEM=y
 CONFIG_BASE_SMALL=1
-# CONFIG_SLOB is not set
-
-#
-# Loadable module support
-#
 CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
 # CONFIG_MODULE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 # CONFIG_KMOD is not set
-
-#
-# Block layer
-#
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
 
 #
 # IO Schedulers
@@ -95,57 +107,17 @@ CONFIG_IOSCHED_NOOP=y
 # CONFIG_DEFAULT_CFQ is not set
 CONFIG_DEFAULT_NOOP=y
 CONFIG_DEFAULT_IOSCHED="noop"
+CONFIG_CLASSIC_RCU=y
 
 #
 # System type
 #
-CONFIG_SOLUTION_ENGINE=y
-CONFIG_SH_SOLUTION_ENGINE=y
-# CONFIG_SH_7751_SOLUTION_ENGINE is not set
-# CONFIG_SH_7300_SOLUTION_ENGINE is not set
-# CONFIG_SH_7343_SOLUTION_ENGINE is not set
-# CONFIG_SH_73180_SOLUTION_ENGINE is not set
-# CONFIG_SH_7751_SYSTEMH is not set
-# CONFIG_SH_HP6XX is not set
-# CONFIG_SH_SATURN is not set
-# CONFIG_SH_DREAMCAST is not set
-# CONFIG_SH_MPC1211 is not set
-# CONFIG_SH_SH03 is not set
-# CONFIG_SH_SECUREEDGE5410 is not set
-# CONFIG_SH_HS7751RVOIP is not set
-# CONFIG_SH_7710VOIPGW is not set
-# CONFIG_SH_RTS7751R2D is not set
-# CONFIG_SH_HIGHLANDER is not set
-# CONFIG_SH_EDOSK7705 is not set
-# CONFIG_SH_SH4202_MICRODEV is not set
-# CONFIG_SH_LANDISK is not set
-# CONFIG_SH_TITAN is not set
-# CONFIG_SH_SHMIN is not set
-# CONFIG_SH_7206_SOLUTION_ENGINE is not set
-# CONFIG_SH_7619_SOLUTION_ENGINE is not set
-# CONFIG_SH_LBOX_RE2 is not set
-# CONFIG_SH_UNKNOWN is not set
-
-#
-# Processor selection
-#
 CONFIG_CPU_SH3=y
-
-#
-# SH-2 Processor Support
-#
-# CONFIG_CPU_SUBTYPE_SH7604 is not set
 # CONFIG_CPU_SUBTYPE_SH7619 is not set
-
-#
-# SH-2A Processor Support
-#
+# CONFIG_CPU_SUBTYPE_SH7203 is not set
 # CONFIG_CPU_SUBTYPE_SH7206 is not set
-
-#
-# SH-3 Processor Support
-#
-# CONFIG_CPU_SUBTYPE_SH7300 is not set
+# CONFIG_CPU_SUBTYPE_SH7263 is not set
+# CONFIG_CPU_SUBTYPE_MXG is not set
 # CONFIG_CPU_SUBTYPE_SH7705 is not set
 # CONFIG_CPU_SUBTYPE_SH7706 is not set
 # CONFIG_CPU_SUBTYPE_SH7707 is not set
@@ -153,10 +125,8 @@ CONFIG_CPU_SH3=y
 # CONFIG_CPU_SUBTYPE_SH7709 is not set
 # CONFIG_CPU_SUBTYPE_SH7710 is not set
 CONFIG_CPU_SUBTYPE_SH7712=y
-
-#
-# SH-4 Processor Support
-#
+# CONFIG_CPU_SUBTYPE_SH7720 is not set
+# CONFIG_CPU_SUBTYPE_SH7721 is not set
 # CONFIG_CPU_SUBTYPE_SH7750 is not set
 # CONFIG_CPU_SUBTYPE_SH7091 is not set
 # CONFIG_CPU_SUBTYPE_SH7750R is not set
@@ -165,37 +135,37 @@ CONFIG_CPU_SUBTYPE_SH7712=y
 # CONFIG_CPU_SUBTYPE_SH7751R is not set
 # CONFIG_CPU_SUBTYPE_SH7760 is not set
 # CONFIG_CPU_SUBTYPE_SH4_202 is not set
-
-#
-# ST40 Processor Support
-#
-# CONFIG_CPU_SUBTYPE_ST40STB1 is not set
-# CONFIG_CPU_SUBTYPE_ST40GX1 is not set
-
-#
-# SH-4A Processor Support
-#
+# CONFIG_CPU_SUBTYPE_SH7723 is not set
+# CONFIG_CPU_SUBTYPE_SH7763 is not set
 # CONFIG_CPU_SUBTYPE_SH7770 is not set
 # CONFIG_CPU_SUBTYPE_SH7780 is not set
 # CONFIG_CPU_SUBTYPE_SH7785 is not set
-
-#
-# SH4AL-DSP Processor Support
-#
-# CONFIG_CPU_SUBTYPE_SH73180 is not set
+# CONFIG_CPU_SUBTYPE_SHX3 is not set
 # CONFIG_CPU_SUBTYPE_SH7343 is not set
 # CONFIG_CPU_SUBTYPE_SH7722 is not set
+# CONFIG_CPU_SUBTYPE_SH7366 is not set
+# CONFIG_CPU_SUBTYPE_SH5_101 is not set
+# CONFIG_CPU_SUBTYPE_SH5_103 is not set
 
 #
 # Memory management options
 #
+CONFIG_QUICKLIST=y
 CONFIG_MMU=y
 CONFIG_PAGE_OFFSET=0x80000000
 CONFIG_MEMORY_START=0x0c000000
 CONFIG_MEMORY_SIZE=0x02000000
+CONFIG_29BIT=y
 CONFIG_VSYSCALL=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_SPARSEMEM_ENABLE=y
+CONFIG_ARCH_SPARSEMEM_DEFAULT=y
+CONFIG_MAX_ACTIVE_REGIONS=1
+CONFIG_ARCH_POPULATES_NODE_MAP=y
+CONFIG_ARCH_SELECT_MEMORY_MODEL=y
 CONFIG_PAGE_SIZE_4KB=y
 # CONFIG_PAGE_SIZE_8KB is not set
+# CONFIG_PAGE_SIZE_16KB is not set
 # CONFIG_PAGE_SIZE_64KB is not set
 CONFIG_SELECT_MEMORY_MODEL=y
 CONFIG_FLATMEM_MANUAL=y
@@ -203,21 +173,21 @@ CONFIG_FLATMEM_MANUAL=y
 # CONFIG_SPARSEMEM_MANUAL is not set
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPARSEMEM_STATIC=y
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_RESOURCES_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
+CONFIG_NR_QUICK=2
 
 #
 # Cache configuration
 #
 # CONFIG_SH_DIRECT_MAPPED is not set
-# CONFIG_SH_WRITETHROUGH is not set
-# CONFIG_SH_OCRAM is not set
-CONFIG_CF_ENABLER=y
-# CONFIG_CF_AREA5 is not set
-CONFIG_CF_AREA6=y
-CONFIG_CF_BASE_ADDR=0xb8000000
+CONFIG_CACHE_WRITEBACK=y
+# CONFIG_CACHE_WRITETHROUGH is not set
+# CONFIG_CACHE_OFF is not set
 
 #
 # Processor features
@@ -230,6 +200,14 @@ CONFIG_CPU_LITTLE_ENDIAN=y
 CONFIG_CPU_HAS_INTEVT=y
 CONFIG_CPU_HAS_IPR_IRQ=y
 CONFIG_CPU_HAS_SR_RB=y
+CONFIG_CPU_HAS_DSP=y
+
+#
+# Board support
+#
+CONFIG_SOLUTION_ENGINE=y
+CONFIG_SH_SOLUTION_ENGINE=y
+# CONFIG_SH_AP325RXA is not set
 
 #
 # Timer and clock configuration
@@ -237,6 +215,10 @@ CONFIG_CPU_HAS_SR_RB=y
 CONFIG_SH_TMU=y
 CONFIG_SH_TIMER_IRQ=16
 CONFIG_SH_PCLK_FREQ=66666666
+# CONFIG_TICK_ONESHOT is not set
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
 
 #
 # CPU Frequency scaling
@@ -251,7 +233,6 @@ CONFIG_SH_PCLK_FREQ=66666666
 #
 # Companion Chips
 #
-# CONFIG_HD6446X_SERIES is not set
 
 #
 # Additional SuperH Device Drivers
@@ -267,48 +248,40 @@ CONFIG_HZ_250=y
 # CONFIG_HZ_300 is not set
 # CONFIG_HZ_1000 is not set
 CONFIG_HZ=250
+# CONFIG_SCHED_HRTICK is not set
 # CONFIG_KEXEC is not set
-# CONFIG_SMP is not set
+# CONFIG_CRASH_DUMP is not set
 # CONFIG_PREEMPT_NONE is not set
 CONFIG_PREEMPT_VOLUNTARY=y
 # CONFIG_PREEMPT is not set
+CONFIG_GUSA=y
+# CONFIG_GUSA_RB is not set
 
 #
 # Boot options
 #
 CONFIG_ZERO_PAGE_OFFSET=0x00001000
 CONFIG_BOOT_LINK_OFFSET=0x00800000
-# CONFIG_UBC_WAKEUP is not set
 CONFIG_CMDLINE_BOOL=y
 CONFIG_CMDLINE="console=ttySC0,115200 root=/dev/sda1"
 
 #
 # Bus options
 #
-# CONFIG_PCI is not set
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
+CONFIG_CF_ENABLER=y
+# CONFIG_CF_AREA5 is not set
+CONFIG_CF_AREA6=y
+CONFIG_CF_BASE_ADDR=0xb8000000
+# CONFIG_ARCH_SUPPORTS_MSI is not set
 # CONFIG_PCCARD is not set
 
 #
-# PCI Hotplug Support
-#
-
-#
 # Executable file formats
 #
 CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_FLAT is not set
 # CONFIG_BINFMT_MISC is not set
 
 #
-# Power management options (EXPERIMENTAL)
-#
-# CONFIG_PM is not set
-
-#
 # Networking
 #
 CONFIG_NET=y
@@ -316,7 +289,6 @@ CONFIG_NET=y
 #
 # Networking options
 #
-# CONFIG_NETDEBUG is not set
 CONFIG_PACKET=y
 CONFIG_PACKET_MMAP=y
 CONFIG_UNIX=y
@@ -324,6 +296,7 @@ CONFIG_XFRM=y
 # CONFIG_XFRM_USER is not set
 # CONFIG_XFRM_SUB_POLICY is not set
 # CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
 CONFIG_NET_KEY=y
 # CONFIG_NET_KEY_MIGRATE is not set
 CONFIG_INET=y
@@ -334,11 +307,10 @@ CONFIG_ASK_IP_FIB_HASH=y
 CONFIG_IP_FIB_HASH=y
 CONFIG_IP_MULTIPLE_TABLES=y
 CONFIG_IP_ROUTE_MULTIPATH=y
-# CONFIG_IP_ROUTE_MULTIPATH_CACHED is not set
 CONFIG_IP_ROUTE_VERBOSE=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
-# CONFIG_IP_PNP_BOOTP is not set
+CONFIG_IP_PNP_BOOTP=y
 # CONFIG_IP_PNP_RARP is not set
 # CONFIG_NET_IPIP is not set
 # CONFIG_NET_IPGRE is not set
@@ -355,30 +327,17 @@ CONFIG_INET_TUNNEL=y
 CONFIG_INET_XFRM_MODE_TRANSPORT=y
 CONFIG_INET_XFRM_MODE_TUNNEL=y
 CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
 # CONFIG_INET_DIAG is not set
 # CONFIG_TCP_CONG_ADVANCED is not set
 CONFIG_TCP_CONG_CUBIC=y
 CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
 # CONFIG_NETWORK_SECMARK is not set
 # CONFIG_NETFILTER is not set
-
-#
-# DCCP Configuration (EXPERIMENTAL)
-#
 # CONFIG_IP_DCCP is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
 # CONFIG_IP_SCTP is not set
-
-#
-# TIPC Configuration (EXPERIMENTAL)
-#
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
@@ -391,15 +350,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
 CONFIG_NET_SCHED=y
-CONFIG_NET_SCH_FIFO=y
-CONFIG_NET_SCH_CLK_JIFFIES=y
-# CONFIG_NET_SCH_CLK_GETTIMEOFDAY is not set
-# CONFIG_NET_SCH_CLK_CPU is not set
 
 #
 # Queueing/Scheduling
@@ -408,6 +359,7 @@ CONFIG_NET_SCH_CBQ=y
 CONFIG_NET_SCH_HTB=y
 CONFIG_NET_SCH_HFSC=y
 CONFIG_NET_SCH_PRIO=y
+# CONFIG_NET_SCH_RR is not set
 CONFIG_NET_SCH_RED=y
 CONFIG_NET_SCH_SFQ=y
 CONFIG_NET_SCH_TEQL=y
@@ -415,7 +367,6 @@ CONFIG_NET_SCH_TBF=y
 CONFIG_NET_SCH_GRED=y
 CONFIG_NET_SCH_DSMARK=y
 CONFIG_NET_SCH_NETEM=y
-CONFIG_NET_SCH_INGRESS=y
 
 #
 # Classification
@@ -429,50 +380,55 @@ CONFIG_NET_CLS_FW=y
 # CONFIG_NET_CLS_U32 is not set
 # CONFIG_NET_CLS_RSVP is not set
 # CONFIG_NET_CLS_RSVP6 is not set
+# CONFIG_NET_CLS_FLOW is not set
 # CONFIG_NET_EMATCH is not set
 # CONFIG_NET_CLS_ACT is not set
-# CONFIG_NET_CLS_POLICE is not set
 CONFIG_NET_CLS_IND=y
-CONFIG_NET_ESTIMATOR=y
+CONFIG_NET_SCH_FIFO=y
 
 #
 # Network testing
 #
 # CONFIG_NET_PKTGEN is not set
 # CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
-# CONFIG_IEEE80211 is not set
+# CONFIG_AF_RXRPC is not set
 CONFIG_FIB_RULES=y
 
 #
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
+# CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
 # Device Drivers
 #
 
 #
 # Generic Driver Options
 #
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=y
 # CONFIG_DEBUG_DRIVER is not set
 # CONFIG_DEBUG_DEVRES is not set
 # CONFIG_SYS_HYPERVISOR is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
 # CONFIG_CONNECTOR is not set
-
-#
-# Memory Technology Devices (MTD)
-#
 CONFIG_MTD=y
 # CONFIG_MTD_DEBUG is not set
 CONFIG_MTD_CONCAT=y
 CONFIG_MTD_PARTITIONS=y
 # CONFIG_MTD_REDBOOT_PARTS is not set
 # CONFIG_MTD_CMDLINE_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
 
 #
 # User Modules And Translation Layers
@@ -485,6 +441,7 @@ CONFIG_MTD_BLOCK=y
 # CONFIG_INFTL is not set
 # CONFIG_RFD_FTL is not set
 # CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
 
 #
 # RAM/ROM/Flash chip drivers
@@ -510,7 +467,6 @@ CONFIG_MTD_CFI_UTIL=y
 # CONFIG_MTD_RAM is not set
 # CONFIG_MTD_ROM is not set
 # CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_OBSOLETE_CHIPS is not set
 
 #
 # Mapping drivers for chip access
@@ -533,44 +489,25 @@ CONFIG_MTD_CFI_UTIL=y
 # CONFIG_MTD_DOC2000 is not set
 # CONFIG_MTD_DOC2001 is not set
 # CONFIG_MTD_DOC2001PLUS is not set
-
-#
-# NAND Flash Device Drivers
-#
 # CONFIG_MTD_NAND is not set
-
-#
-# OneNAND Flash Device Drivers
-#
 # CONFIG_MTD_ONENAND is not set
 
 #
-# Parallel port support
+# UBI - Unsorted block images
 #
+# CONFIG_MTD_UBI is not set
 # CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-# CONFIG_PNPACPI is not set
-
-#
-# Block devices
-#
+CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_COW_COMMON is not set
 # CONFIG_BLK_DEV_LOOP is not set
 # CONFIG_BLK_DEV_NBD is not set
 # CONFIG_BLK_DEV_RAM is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
-
-#
-# Misc devices
-#
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
+CONFIG_MISC_DEVICES=y
+# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
 #
@@ -578,6 +515,7 @@ CONFIG_MTD_CFI_UTIL=y
 #
 # CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
 # CONFIG_SCSI_TGT is not set
 # CONFIG_SCSI_NETLINK is not set
 CONFIG_SCSI_PROC_FS=y
@@ -599,6 +537,7 @@ CONFIG_BLK_DEV_SD=y
 # CONFIG_SCSI_CONSTANTS is not set
 # CONFIG_SCSI_LOGGING is not set
 # CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
 
 #
 # SCSI Transports
@@ -606,94 +545,72 @@ CONFIG_BLK_DEV_SD=y
 # CONFIG_SCSI_SPI_ATTRS is not set
 # CONFIG_SCSI_FC_ATTRS is not set
 # CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_ATTRS is not set
 # CONFIG_SCSI_SAS_LIBSAS is not set
-
-#
-# SCSI low-level drivers
-#
+# CONFIG_SCSI_SRP_ATTRS is not set
+CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_ISCSI_TCP is not set
 # CONFIG_SCSI_DEBUG is not set
-
-#
-# Serial ATA (prod) and Parallel ATA (experimental) drivers
-#
 CONFIG_ATA=y
 # CONFIG_ATA_NONSTANDARD is not set
+CONFIG_SATA_PMP=y
+CONFIG_ATA_SFF=y
+# CONFIG_SATA_MV is not set
 CONFIG_PATA_PLATFORM=y
-
-#
-# Multi-device support (RAID and LVM)
-#
 # CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
-#
-# Network device support
-#
 CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
 # CONFIG_EQUALIZER is not set
 # CONFIG_TUN is not set
-
-#
-# PHY device support
-#
-
-#
-# Ethernet (10 or 100Mbit)
-#
-# CONFIG_NET_ETHERNET is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-
-#
-# Ethernet (10000 Mbit)
-#
-
-#
-# Token Ring devices
-#
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Wan interfaces
-#
+# CONFIG_VETH is not set
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+# CONFIG_MARVELL_PHY is not set
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+# CONFIG_SMSC_PHY is not set
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
+# CONFIG_FIXED_PHY is not set
+CONFIG_MDIO_BITBANG=y
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_AX88796 is not set
+# CONFIG_STNIC is not set
+CONFIG_SH_ETH=y
+# CONFIG_SMC91X is not set
+# CONFIG_SMC911X is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_B44 is not set
+CONFIG_NETDEV_1000=y
+# CONFIG_E1000E_ENABLED is not set
+CONFIG_NETDEV_10000=y
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
 # CONFIG_WAN is not set
 # CONFIG_PPP is not set
 # CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
 # CONFIG_NETCONSOLE is not set
 # CONFIG_NETPOLL is not set
 # CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
 # CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
 # CONFIG_PHONE is not set
 
 #
@@ -711,6 +628,7 @@ CONFIG_NETDEVICES=y
 # Character devices
 #
 # CONFIG_VT is not set
+CONFIG_DEVKMEM=y
 # CONFIG_SERIAL_NONSTANDARD is not set
 
 #
@@ -728,99 +646,78 @@ CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
 CONFIG_UNIX98_PTYS=y
 # CONFIG_LEGACY_PTYS is not set
-
-#
-# IPMI
-#
 # CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
 CONFIG_HW_RANDOM=m
-# CONFIG_GEN_RTC is not set
-# CONFIG_DTLK is not set
 # CONFIG_R3964 is not set
 # CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
 # CONFIG_TCG_TPM is not set
-
-#
-# I2C support
-#
 # CONFIG_I2C is not set
-
-#
-# SPI support
-#
 # CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
-
-#
-# Dallas's 1-wire bus
-#
 # CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_WATCHDOG is not set
 
 #
-# Hardware Monitoring support
+# Sonics Silicon Backplane
 #
-# CONFIG_HWMON is not set
-# CONFIG_HWMON_VID is not set
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
 
 #
 # Multifunction device drivers
 #
 # CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
 
 #
 # Multimedia devices
 #
+
+#
+# Multimedia core support
+#
 # CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
 
 #
-# Digital Video Broadcasting Devices
+# Multimedia drivers
 #
-# CONFIG_DVB is not set
+# CONFIG_DAB is not set
 
 #
 # Graphics support
 #
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
 # CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
-# Sound
+# Display device support
 #
-# CONFIG_SOUND is not set
+# CONFIG_DISPLAY_SUPPORT is not set
 
 #
-# USB support
+# Sound
 #
-# CONFIG_USB_ARCH_HAS_HCD is not set
+# CONFIG_SOUND is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
 # CONFIG_USB_ARCH_HAS_OHCI is not set
 # CONFIG_USB_ARCH_HAS_EHCI is not set
+# CONFIG_USB is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
 
 #
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
 #
-
-#
-# USB Gadget Support
-#
 # CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
 # CONFIG_MMC is not set
-
-#
-# LED devices
-#
+# CONFIG_MEMSTICK is not set
 CONFIG_NEW_LEDS=y
 CONFIG_LEDS_CLASS=y
 
@@ -834,40 +731,10 @@ CONFIG_LEDS_CLASS=y
 CONFIG_LEDS_TRIGGERS=y
 # CONFIG_LEDS_TRIGGER_TIMER is not set
 # CONFIG_LEDS_TRIGGER_HEARTBEAT is not set
-
-#
-# InfiniBand support
-#
-
-#
-# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
-#
-
-#
-# Real Time Clock
-#
+# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set
+# CONFIG_ACCESSIBILITY is not set
 # CONFIG_RTC_CLASS is not set
-
-#
-# DMA Engine support
-#
-# CONFIG_DMA_ENGINE is not set
-
-#
-# DMA Clients
-#
-
-#
-# DMA Devices
-#
-
-#
-# Auxiliary Display support
-#
-
-#
-# Virtualization
-#
+# CONFIG_UIO is not set
 
 #
 # File systems
@@ -877,20 +744,21 @@ CONFIG_EXT2_FS_XATTR=y
 CONFIG_EXT2_FS_POSIX_ACL=y
 CONFIG_EXT2_FS_SECURITY=y
 # CONFIG_EXT2_FS_XIP is not set
-# CONFIG_EXT3_FS is not set
+CONFIG_EXT3_FS=y
+CONFIG_EXT3_FS_XATTR=y
+# CONFIG_EXT3_FS_POSIX_ACL is not set
+# CONFIG_EXT3_FS_SECURITY is not set
 # CONFIG_EXT4DEV_FS is not set
+CONFIG_JBD=y
 CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 CONFIG_FS_POSIX_ACL=y
 # CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
+# CONFIG_DNOTIFY is not set
 # CONFIG_INOTIFY is not set
 # CONFIG_QUOTA is not set
-# CONFIG_DNOTIFY is not set
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
 # CONFIG_FUSE_FS is not set
@@ -919,7 +787,6 @@ CONFIG_TMPFS=y
 # CONFIG_TMPFS_POSIX_ACL is not set
 # CONFIG_HUGETLBFS is not set
 # CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
 # CONFIG_CONFIGFS_FS is not set
 
 #
@@ -935,68 +802,67 @@ CONFIG_RAMFS=y
 CONFIG_JFFS2_FS=y
 CONFIG_JFFS2_FS_DEBUG=0
 CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
 # CONFIG_JFFS2_SUMMARY is not set
 # CONFIG_JFFS2_FS_XATTR is not set
 # CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
 CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
 CONFIG_JFFS2_RTIME=y
 # CONFIG_JFFS2_RUBIN is not set
 CONFIG_CRAMFS=y
 # CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
-# CONFIG_NFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+# CONFIG_NFS_V3 is not set
+# CONFIG_NFS_V4 is not set
 # CONFIG_NFSD is not set
+CONFIG_ROOT_NFS=y
+CONFIG_LOCKD=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_SUNRPC_BIND34 is not set
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
 # CONFIG_CIFS is not set
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
 # CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
 
 #
 # Partition Types
 #
 # CONFIG_PARTITION_ADVANCED is not set
 CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
 # CONFIG_NLS is not set
-
-#
-# Distributed Lock Manager
-#
 # CONFIG_DLM is not set
 
 #
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
 # Kernel hacking
 #
 CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 # CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
 # CONFIG_MAGIC_SYSRQ is not set
 # CONFIG_UNUSED_SYMBOLS is not set
 # CONFIG_DEBUG_FS is not set
 # CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
 # CONFIG_DEBUG_SHIRQ is not set
-CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_DETECT_SOFTLOCKUP is not set
+CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
 # CONFIG_DEBUG_SLAB is not set
 # CONFIG_DEBUG_RT_MUTEXES is not set
 # CONFIG_RT_MUTEX_TESTER is not set
@@ -1004,21 +870,28 @@ CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_DEBUG_MUTEXES is not set
 # CONFIG_DEBUG_LOCK_ALLOC is not set
 # CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
 # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
 # CONFIG_DEBUG_KOBJECT is not set
 CONFIG_DEBUG_INFO=y
 # CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
 # CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
 CONFIG_FRAME_POINTER=y
-# CONFIG_FORCED_INLINING is not set
+# CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_FAULT_INJECTION is not set
+# CONFIG_SAMPLES is not set
 # CONFIG_SH_STANDARD_BIOS is not set
 # CONFIG_EARLY_SCIF_CONSOLE is not set
+# CONFIG_DEBUG_BOOTMEM is not set
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
 # CONFIG_4KSTACKS is not set
+# CONFIG_IRQSTACKS is not set
 # CONFIG_SH_KGDB is not set
 
 #
@@ -1026,62 +899,100 @@ CONFIG_FRAME_POINTER=y
 #
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
 
 #
-# Cryptographic options
+# Crypto core or helper
 #
-CONFIG_CRYPTO=y
 CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_AEAD=y
 CONFIG_CRYPTO_BLKCIPHER=y
 CONFIG_CRYPTO_HASH=y
 CONFIG_CRYPTO_MANAGER=y
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+CONFIG_CRYPTO_AUTHENC=y
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=m
+# CONFIG_CRYPTO_LRW is not set
+CONFIG_CRYPTO_PCBC=m
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
 CONFIG_CRYPTO_HMAC=y
 # CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_NULL is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
 # CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
 CONFIG_CRYPTO_SHA1=y
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
 # CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-CONFIG_CRYPTO_ECB=m
-CONFIG_CRYPTO_CBC=y
-CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_LRW is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
 # CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
 # CONFIG_CRYPTO_CAST5 is not set
 # CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
 # CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-CONFIG_CRYPTO_DEFLATE=y
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_TEST is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
 
 #
-# Hardware crypto devices
+# Compression
 #
+CONFIG_CRYPTO_DEFLATE=y
+# CONFIG_CRYPTO_LZO is not set
+CONFIG_CRYPTO_HW=y
 
 #
 # Library routines
 #
 CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
 CONFIG_CRC_CCITT=y
 # CONFIG_CRC16 is not set
+# CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
 # CONFIG_LIBCRC32C is not set
 CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=y
 CONFIG_PLIST=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
diff --git a/arch/sh/configs/sh7763rdp_defconfig b/arch/sh/configs/sh7763rdp_defconfig
new file mode 100644
index 000000000000..baf830c4a7e4
--- /dev/null
+++ b/arch/sh/configs/sh7763rdp_defconfig
@@ -0,0 +1,1133 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.27-rc2
+# Fri Aug  8 13:44:20 2008
+#
+CONFIG_SUPERH=y
+CONFIG_SUPERH32=y
+CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig"
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_BUG=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_ARCH_NO_VIRT_TO_BUS=y
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+CONFIG_GROUP_SCHED=y
+CONFIG_FAIR_GROUP_SCHED=y
+# CONFIG_RT_GROUP_SCHED is not set
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_RELAY is not set
+CONFIG_NAMESPACES=y
+CONFIG_UTS_NS=y
+CONFIG_IPC_NS=y
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
+# CONFIG_BLK_DEV_INITRD is not set
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_EMBEDDED=y
+CONFIG_UID16=y
+# CONFIG_SYSCTL_SYSCALL is not set
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+CONFIG_PROFILING=y
+# CONFIG_MARKERS is not set
+CONFIG_OPROFILE=y
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
+# CONFIG_HAVE_IOREMAP_PROT is not set
+# CONFIG_HAVE_KPROBES is not set
+# CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_ARCH_TRACEHOOK is not set
+# CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+CONFIG_HAVE_CLK=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+# CONFIG_MODULE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_CLASSIC_RCU=y
+
+#
+# System type
+#
+CONFIG_CPU_SH4=y
+CONFIG_CPU_SH4A=y
+# CONFIG_CPU_SUBTYPE_SH7619 is not set
+# CONFIG_CPU_SUBTYPE_SH7203 is not set
+# CONFIG_CPU_SUBTYPE_SH7206 is not set
+# CONFIG_CPU_SUBTYPE_SH7263 is not set
+# CONFIG_CPU_SUBTYPE_MXG is not set
+# CONFIG_CPU_SUBTYPE_SH7705 is not set
+# CONFIG_CPU_SUBTYPE_SH7706 is not set
+# CONFIG_CPU_SUBTYPE_SH7707 is not set
+# CONFIG_CPU_SUBTYPE_SH7708 is not set
+# CONFIG_CPU_SUBTYPE_SH7709 is not set
+# CONFIG_CPU_SUBTYPE_SH7710 is not set
+# CONFIG_CPU_SUBTYPE_SH7712 is not set
+# CONFIG_CPU_SUBTYPE_SH7720 is not set
+# CONFIG_CPU_SUBTYPE_SH7721 is not set
+# CONFIG_CPU_SUBTYPE_SH7750 is not set
+# CONFIG_CPU_SUBTYPE_SH7091 is not set
+# CONFIG_CPU_SUBTYPE_SH7750R is not set
+# CONFIG_CPU_SUBTYPE_SH7750S is not set
+# CONFIG_CPU_SUBTYPE_SH7751 is not set
+# CONFIG_CPU_SUBTYPE_SH7751R is not set
+# CONFIG_CPU_SUBTYPE_SH7760 is not set
+# CONFIG_CPU_SUBTYPE_SH4_202 is not set
+# CONFIG_CPU_SUBTYPE_SH7723 is not set
+CONFIG_CPU_SUBTYPE_SH7763=y
+# CONFIG_CPU_SUBTYPE_SH7770 is not set
+# CONFIG_CPU_SUBTYPE_SH7780 is not set
+# CONFIG_CPU_SUBTYPE_SH7785 is not set
+# CONFIG_CPU_SUBTYPE_SHX3 is not set
+# CONFIG_CPU_SUBTYPE_SH7343 is not set
+# CONFIG_CPU_SUBTYPE_SH7722 is not set
+# CONFIG_CPU_SUBTYPE_SH7366 is not set
+# CONFIG_CPU_SUBTYPE_SH5_101 is not set
+# CONFIG_CPU_SUBTYPE_SH5_103 is not set
+
+#
+# Memory management options
+#
+CONFIG_QUICKLIST=y
+CONFIG_MMU=y
+CONFIG_PAGE_OFFSET=0x80000000
+CONFIG_MEMORY_START=0x0c000000
+CONFIG_MEMORY_SIZE=0x04000000
+CONFIG_29BIT=y
+CONFIG_VSYSCALL=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_SPARSEMEM_ENABLE=y
+CONFIG_ARCH_SPARSEMEM_DEFAULT=y
+CONFIG_MAX_ACTIVE_REGIONS=1
+CONFIG_ARCH_POPULATES_NODE_MAP=y
+CONFIG_ARCH_SELECT_MEMORY_MODEL=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+CONFIG_PAGE_SIZE_4KB=y
+# CONFIG_PAGE_SIZE_8KB is not set
+# CONFIG_PAGE_SIZE_16KB is not set
+# CONFIG_PAGE_SIZE_64KB is not set
+CONFIG_ENTRY_OFFSET=0x00001000
+CONFIG_SELECT_MEMORY_MODEL=y
+# CONFIG_FLATMEM_MANUAL is not set
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+CONFIG_SPARSEMEM_MANUAL=y
+CONFIG_SPARSEMEM=y
+CONFIG_HAVE_MEMORY_PRESENT=y
+CONFIG_SPARSEMEM_STATIC=y
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+# CONFIG_MEMORY_HOTPLUG is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_NR_QUICK=2
+
+#
+# Cache configuration
+#
+# CONFIG_SH_DIRECT_MAPPED is not set
+CONFIG_CACHE_WRITEBACK=y
+# CONFIG_CACHE_WRITETHROUGH is not set
+# CONFIG_CACHE_OFF is not set
+
+#
+# Processor features
+#
+CONFIG_CPU_LITTLE_ENDIAN=y
+# CONFIG_CPU_BIG_ENDIAN is not set
+CONFIG_SH_FPU=y
+# CONFIG_SH_STORE_QUEUES is not set
+CONFIG_CPU_HAS_INTEVT=y
+CONFIG_CPU_HAS_SR_RB=y
+CONFIG_CPU_HAS_FPU=y
+
+#
+# Board support
+#
+CONFIG_SH_SH7763RDP=y
+
+#
+# Timer and clock configuration
+#
+CONFIG_SH_TMU=y
+CONFIG_SH_TIMER_IRQ=28
+CONFIG_SH_PCLK_FREQ=66666666
+# CONFIG_TICK_ONESHOT is not set
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+
+#
+# CPU Frequency scaling
+#
+# CONFIG_CPU_FREQ is not set
+
+#
+# DMA support
+#
+# CONFIG_SH_DMA is not set
+
+#
+# Companion Chips
+#
+
+#
+# Additional SuperH Device Drivers
+#
+# CONFIG_HEARTBEAT is not set
+# CONFIG_PUSH_SWITCH is not set
+
+#
+# Kernel features
+#
+# CONFIG_HZ_100 is not set
+CONFIG_HZ_250=y
+# CONFIG_HZ_300 is not set
+# CONFIG_HZ_1000 is not set
+CONFIG_HZ=250
+# CONFIG_SCHED_HRTICK is not set
+# CONFIG_KEXEC is not set
+# CONFIG_CRASH_DUMP is not set
+CONFIG_SECCOMP=y
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+CONFIG_GUSA=y
+
+#
+# Boot options
+#
+CONFIG_ZERO_PAGE_OFFSET=0x00001000
+CONFIG_BOOT_LINK_OFFSET=0x00800000
+CONFIG_CMDLINE_BOOL=y
+CONFIG_CMDLINE="console=ttySC2,115200 root=/dev/sda1 rootdelay=10"
+
+#
+# Bus options
+#
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Executable file formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_MISC is not set
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+CONFIG_WIRELESS_EXT=y
+CONFIG_WIRELESS_EXT_SYSFS=y
+# CONFIG_MAC80211 is not set
+# CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+# CONFIG_MTD_CHAR is not set
+CONFIG_MTD_BLKDEVS=y
+# CONFIG_MTD_BLOCK is not set
+# CONFIG_MTD_BLOCK_RO is not set
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+CONFIG_MTD_JEDECPROBE=y
+CONFIG_MTD_GEN_PROBE=y
+CONFIG_MTD_CFI_ADV_OPTIONS=y
+CONFIG_MTD_CFI_NOSWAP=y
+# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
+# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
+CONFIG_MTD_CFI_GEOMETRY=y
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+# CONFIG_MTD_MAP_BANK_WIDTH_4 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_OTP is not set
+CONFIG_MTD_CFI_INTELEXT=y
+CONFIG_MTD_CFI_AMDSTD=y
+CONFIG_MTD_CFI_STAA=y
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+CONFIG_MTD_COMPLEX_MAPPINGS=y
+CONFIG_MTD_PHYSMAP=y
+CONFIG_MTD_PHYSMAP_START=0x8000000
+CONFIG_MTD_PHYSMAP_LEN=0
+CONFIG_MTD_PHYSMAP_BANKWIDTH=2
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+# CONFIG_MTD_NAND is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+# CONFIG_BLK_DEV_LOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_UB is not set
+# CONFIG_BLK_DEV_RAM is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
+# CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+# CONFIG_SCSI_MULTI_LUN is not set
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+CONFIG_SCSI_LOWLEVEL=y
+# CONFIG_ISCSI_TCP is not set
+# CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_DH is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+# CONFIG_MARVELL_PHY is not set
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+# CONFIG_SMSC_PHY is not set
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
+# CONFIG_FIXED_PHY is not set
+CONFIG_MDIO_BITBANG=y
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_AX88796 is not set
+# CONFIG_STNIC is not set
+CONFIG_SH_ETH=y
+# CONFIG_SMC91X is not set
+# CONFIG_SMC911X is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_B44 is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
+# CONFIG_WAN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_SH_SCI=y
+CONFIG_SERIAL_SH_SCI_NR_UARTS=3
+CONFIG_SERIAL_SH_SCI_CONSOLE=y
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_IPMI_HANDLER is not set
+CONFIG_HW_RANDOM=y
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+# CONFIG_I2C is not set
+# CONFIG_SPI is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+# CONFIG_WATCHDOG is not set
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
+
+#
+# Multimedia devices
+#
+
+#
+# Multimedia core support
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
+# CONFIG_DAB is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+CONFIG_FB_FOREIGN_ENDIAN=y
+CONFIG_FB_BOTH_ENDIAN=y
+# CONFIG_FB_BIG_ENDIAN is not set
+# CONFIG_FB_LITTLE_ENDIAN is not set
+# CONFIG_FB_SYS_FOPS is not set
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_S1D13XXX is not set
+# CONFIG_FB_SH_MOBILE_LCDC is not set
+CONFIG_FB_SH7760=y
+# CONFIG_FB_VIRTUAL is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
+# CONFIG_FONTS is not set
+CONFIG_FONT_8x8=y
+CONFIG_FONT_8x16=y
+CONFIG_LOGO=y
+CONFIG_LOGO_LINUX_MONO=y
+CONFIG_LOGO_LINUX_VGA16=y
+CONFIG_LOGO_LINUX_CLUT224=y
+CONFIG_LOGO_SUPERH_MONO=y
+CONFIG_LOGO_SUPERH_VGA16=y
+CONFIG_LOGO_SUPERH_CLUT224=y
+# CONFIG_SOUND is not set
+# CONFIG_HID_SUPPORT is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
+
+#
+# Miscellaneous USB options
+#
+# CONFIG_USB_DEVICEFS is not set
+CONFIG_USB_DEVICE_CLASS=y
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_OTG is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
+CONFIG_USB_OHCI_HCD=y
+# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# may also be needed; see USB_STORAGE Help for more information
+#
+CONFIG_USB_STORAGE=y
+# CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_ISD200 is not set
+# CONFIG_USB_STORAGE_DPCM is not set
+# CONFIG_USB_STORAGE_USBAT is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_ONETOUCH is not set
+# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+CONFIG_USB_MON=y
+
+#
+# USB port drivers
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_AUERSWALD is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_PHIDGET is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_GADGET is not set
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+# CONFIG_MMC_UNSAFE_RESUME is not set
+
+#
+# MMC/SD Card Drivers
+#
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_BLOCK_BOUNCE=y
+# CONFIG_SDIO_UART is not set
+# CONFIG_MMC_TEST is not set
+
+#
+# MMC/SD Host Controller Drivers
+#
+# CONFIG_MMC_SDHCI is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
+# CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
+# CONFIG_UIO is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+CONFIG_EXT3_FS_XATTR=y
+# CONFIG_EXT3_FS_POSIX_ACL is not set
+# CONFIG_EXT3_FS_SECURITY is not set
+# CONFIG_EXT4DEV_FS is not set
+CONFIG_JBD=y
+CONFIG_FS_MBCACHE=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+CONFIG_FS_POSIX_ACL=y
+# CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+CONFIG_AUTOFS_FS=y
+CONFIG_AUTOFS4_FS=y
+# CONFIG_FUSE_FS is not set
+CONFIG_GENERIC_ACL=y
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_KCORE=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+CONFIG_TMPFS_POSIX_ACL=y
+# CONFIG_HUGETLBFS is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_JFFS2_FS is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+# CONFIG_NFS_V3 is not set
+# CONFIG_NFS_V4 is not set
+CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
+CONFIG_LOCKD=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+CONFIG_NLS_CODEPAGE_737=y
+CONFIG_NLS_CODEPAGE_775=y
+CONFIG_NLS_CODEPAGE_850=y
+CONFIG_NLS_CODEPAGE_852=y
+CONFIG_NLS_CODEPAGE_855=y
+CONFIG_NLS_CODEPAGE_857=y
+CONFIG_NLS_CODEPAGE_860=y
+CONFIG_NLS_CODEPAGE_861=y
+CONFIG_NLS_CODEPAGE_862=y
+CONFIG_NLS_CODEPAGE_863=y
+CONFIG_NLS_CODEPAGE_864=y
+CONFIG_NLS_CODEPAGE_865=y
+CONFIG_NLS_CODEPAGE_866=y
+CONFIG_NLS_CODEPAGE_869=y
+CONFIG_NLS_CODEPAGE_936=y
+CONFIG_NLS_CODEPAGE_950=y
+CONFIG_NLS_CODEPAGE_932=y
+CONFIG_NLS_CODEPAGE_949=y
+CONFIG_NLS_CODEPAGE_874=y
+CONFIG_NLS_ISO8859_8=y
+CONFIG_NLS_CODEPAGE_1250=y
+CONFIG_NLS_CODEPAGE_1251=y
+CONFIG_NLS_ASCII=y
+CONFIG_NLS_ISO8859_1=y
+CONFIG_NLS_ISO8859_2=y
+CONFIG_NLS_ISO8859_3=y
+CONFIG_NLS_ISO8859_4=y
+CONFIG_NLS_ISO8859_5=y
+CONFIG_NLS_ISO8859_6=y
+CONFIG_NLS_ISO8859_7=y
+CONFIG_NLS_ISO8859_9=y
+CONFIG_NLS_ISO8859_13=y
+CONFIG_NLS_ISO8859_14=y
+CONFIG_NLS_ISO8859_15=y
+CONFIG_NLS_KOI8_R=y
+CONFIG_NLS_KOI8_U=y
+CONFIG_NLS_UTF8=y
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+# CONFIG_PRINTK_TIME is not set
+# CONFIG_ENABLE_WARN_DEPRECATED is not set
+# CONFIG_ENABLE_MUST_CHECK is not set
+CONFIG_FRAME_WARN=1024
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_KERNEL is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_SAMPLES is not set
+# CONFIG_SH_STANDARD_BIOS is not set
+# CONFIG_EARLY_SCIF_CONSOLE is not set
+# CONFIG_SH_KGDB is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+# CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_MD4 is not set
+# CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_LZO is not set
+CONFIG_CRYPTO_HW=y
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+CONFIG_CRC_T10DIF=y
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
diff --git a/arch/sh/configs/sh7785lcr_defconfig b/arch/sh/configs/sh7785lcr_defconfig
new file mode 100644
index 000000000000..ff72697365d1
--- /dev/null
+++ b/arch/sh/configs/sh7785lcr_defconfig
@@ -0,0 +1,1388 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.26-rc8
+# Tue Jul 15 21:37:59 2008
+#
+CONFIG_SUPERH=y
+CONFIG_SUPERH32=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_BUG=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_SYS_SUPPORTS_NUMA=y
+CONFIG_SYS_SUPPORTS_PCI=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_ARCH_NO_VIRT_TO_BUS=y
+CONFIG_ARCH_SUPPORTS_AOUT=y
+CONFIG_IO_TRAPPED=y
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+CONFIG_BSD_PROCESS_ACCT=y
+# CONFIG_BSD_PROCESS_ACCT_V3 is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+CONFIG_GROUP_SCHED=y
+CONFIG_FAIR_GROUP_SCHED=y
+# CONFIG_RT_GROUP_SCHED is not set
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
+# CONFIG_BLK_DEV_INITRD is not set
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_EMBEDDED=y
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+CONFIG_PROFILING=y
+# CONFIG_MARKERS is not set
+# CONFIG_OPROFILE is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_HAVE_KPROBES is not set
+# CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_DMA_ATTRS is not set
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+CONFIG_CLASSIC_RCU=y
+
+#
+# System type
+#
+CONFIG_CPU_SH4=y
+CONFIG_CPU_SH4A=y
+CONFIG_CPU_SHX2=y
+# CONFIG_CPU_SUBTYPE_SH7619 is not set
+# CONFIG_CPU_SUBTYPE_SH7203 is not set
+# CONFIG_CPU_SUBTYPE_SH7206 is not set
+# CONFIG_CPU_SUBTYPE_SH7263 is not set
+# CONFIG_CPU_SUBTYPE_MXG is not set
+# CONFIG_CPU_SUBTYPE_SH7705 is not set
+# CONFIG_CPU_SUBTYPE_SH7706 is not set
+# CONFIG_CPU_SUBTYPE_SH7707 is not set
+# CONFIG_CPU_SUBTYPE_SH7708 is not set
+# CONFIG_CPU_SUBTYPE_SH7709 is not set
+# CONFIG_CPU_SUBTYPE_SH7710 is not set
+# CONFIG_CPU_SUBTYPE_SH7712 is not set
+# CONFIG_CPU_SUBTYPE_SH7720 is not set
+# CONFIG_CPU_SUBTYPE_SH7721 is not set
+# CONFIG_CPU_SUBTYPE_SH7750 is not set
+# CONFIG_CPU_SUBTYPE_SH7091 is not set
+# CONFIG_CPU_SUBTYPE_SH7750R is not set
+# CONFIG_CPU_SUBTYPE_SH7750S is not set
+# CONFIG_CPU_SUBTYPE_SH7751 is not set
+# CONFIG_CPU_SUBTYPE_SH7751R is not set
+# CONFIG_CPU_SUBTYPE_SH7760 is not set
+# CONFIG_CPU_SUBTYPE_SH4_202 is not set
+# CONFIG_CPU_SUBTYPE_SH7723 is not set
+# CONFIG_CPU_SUBTYPE_SH7763 is not set
+# CONFIG_CPU_SUBTYPE_SH7770 is not set
+# CONFIG_CPU_SUBTYPE_SH7780 is not set
+CONFIG_CPU_SUBTYPE_SH7785=y
+# CONFIG_CPU_SUBTYPE_SHX3 is not set
+# CONFIG_CPU_SUBTYPE_SH7343 is not set
+# CONFIG_CPU_SUBTYPE_SH7722 is not set
+# CONFIG_CPU_SUBTYPE_SH7366 is not set
+# CONFIG_CPU_SUBTYPE_SH5_101 is not set
+# CONFIG_CPU_SUBTYPE_SH5_103 is not set
+
+#
+# Memory management options
+#
+CONFIG_QUICKLIST=y
+CONFIG_MMU=y
+CONFIG_PAGE_OFFSET=0x80000000
+CONFIG_MEMORY_START=0x08000000
+CONFIG_MEMORY_SIZE=0x08000000
+CONFIG_29BIT=y
+# CONFIG_PMB is not set
+# CONFIG_X2TLB is not set
+CONFIG_VSYSCALL=y
+# CONFIG_NUMA is not set
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_SPARSEMEM_ENABLE=y
+CONFIG_ARCH_SPARSEMEM_DEFAULT=y
+CONFIG_MAX_ACTIVE_REGIONS=2
+CONFIG_ARCH_POPULATES_NODE_MAP=y
+CONFIG_ARCH_SELECT_MEMORY_MODEL=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+CONFIG_PAGE_SIZE_4KB=y
+# CONFIG_PAGE_SIZE_8KB is not set
+# CONFIG_PAGE_SIZE_16KB is not set
+# CONFIG_PAGE_SIZE_64KB is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+# CONFIG_FLATMEM_MANUAL is not set
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+CONFIG_SPARSEMEM_MANUAL=y
+CONFIG_SPARSEMEM=y
+CONFIG_HAVE_MEMORY_PRESENT=y
+CONFIG_SPARSEMEM_STATIC=y
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+# CONFIG_MEMORY_HOTPLUG is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_NR_QUICK=2
+
+#
+# Cache configuration
+#
+# CONFIG_SH_DIRECT_MAPPED is not set
+CONFIG_CACHE_WRITEBACK=y
+# CONFIG_CACHE_WRITETHROUGH is not set
+# CONFIG_CACHE_OFF is not set
+
+#
+# Processor features
+#
+CONFIG_CPU_LITTLE_ENDIAN=y
+# CONFIG_CPU_BIG_ENDIAN is not set
+CONFIG_SH_FPU=y
+CONFIG_SH_STORE_QUEUES=y
+CONFIG_CPU_HAS_INTEVT=y
+CONFIG_CPU_HAS_SR_RB=y
+CONFIG_CPU_HAS_PTEA=y
+CONFIG_CPU_HAS_FPU=y
+
+#
+# Board support
+#
+# CONFIG_SH_HIGHLANDER is not set
+CONFIG_SH_SH7785LCR=y
+CONFIG_SH_SH7785LCR_29BIT_PHYSMAPS=y
+
+#
+# Timer and clock configuration
+#
+CONFIG_SH_TMU=y
+CONFIG_SH_TIMER_IRQ=28
+CONFIG_SH_PCLK_FREQ=50000000
+CONFIG_TICK_ONESHOT=y
+# CONFIG_NO_HZ is not set
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+
+#
+# CPU Frequency scaling
+#
+# CONFIG_CPU_FREQ is not set
+
+#
+# DMA support
+#
+# CONFIG_SH_DMA is not set
+
+#
+# Companion Chips
+#
+
+#
+# Additional SuperH Device Drivers
+#
+CONFIG_HEARTBEAT=y
+# CONFIG_PUSH_SWITCH is not set
+
+#
+# Kernel features
+#
+# CONFIG_HZ_100 is not set
+CONFIG_HZ_250=y
+# CONFIG_HZ_300 is not set
+# CONFIG_HZ_1000 is not set
+CONFIG_HZ=250
+# CONFIG_SCHED_HRTICK is not set
+CONFIG_KEXEC=y
+# CONFIG_CRASH_DUMP is not set
+# CONFIG_PREEMPT_NONE is not set
+# CONFIG_PREEMPT_VOLUNTARY is not set
+CONFIG_PREEMPT=y
+# CONFIG_PREEMPT_RCU is not set
+CONFIG_GUSA=y
+
+#
+# Boot options
+#
+CONFIG_ZERO_PAGE_OFFSET=0x00001000
+CONFIG_BOOT_LINK_OFFSET=0x00800000
+# CONFIG_CMDLINE_BOOL is not set
+
+#
+# Bus options
+#
+CONFIG_PCI=y
+CONFIG_SH_PCIDMA_NONCOHERENT=y
+CONFIG_PCI_AUTO=y
+CONFIG_PCI_AUTO_UPDATE_RESOURCES=y
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+CONFIG_PCI_LEGACY=y
+# CONFIG_PCI_DEBUG is not set
+# CONFIG_PCCARD is not set
+# CONFIG_HOTPLUG_PCI is not set
+
+#
+# Executable file formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+CONFIG_IP_ADVANCED_ROUTER=y
+CONFIG_ASK_IP_FIB_HASH=y
+# CONFIG_IP_FIB_TRIE is not set
+CONFIG_IP_FIB_HASH=y
+# CONFIG_IP_MULTIPLE_TABLES is not set
+# CONFIG_IP_ROUTE_MULTIPATH is not set
+# CONFIG_IP_ROUTE_VERBOSE is not set
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+# CONFIG_IP_PNP_BOOTP is not set
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+CONFIG_WIRELESS_EXT=y
+# CONFIG_MAC80211 is not set
+# CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_FW_LOADER is not set
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+CONFIG_MTD_CONCAT=y
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+# CONFIG_MTD_CMDLINE_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_CFI_INTELEXT is not set
+CONFIG_MTD_CFI_AMDSTD=y
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+CONFIG_MTD_PHYSMAP=y
+CONFIG_MTD_PHYSMAP_START=0x00000000
+CONFIG_MTD_PHYSMAP_LEN=0x0
+CONFIG_MTD_PHYSMAP_BANKWIDTH=0
+# CONFIG_MTD_INTEL_VR_NOR is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_PMC551 is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+# CONFIG_MTD_NAND is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_CPQ_CISS_DA is not set
+# CONFIG_BLK_DEV_DAC960 is not set
+# CONFIG_BLK_DEV_UMEM is not set
+# CONFIG_BLK_DEV_COW_COMMON is not set
+# CONFIG_BLK_DEV_LOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_SX8 is not set
+# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=4096
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+# CONFIG_SCSI_MULTI_LUN is not set
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+# CONFIG_SCSI_LOWLEVEL is not set
+CONFIG_ATA=y
+# CONFIG_ATA_NONSTANDARD is not set
+CONFIG_SATA_PMP=y
+# CONFIG_SATA_AHCI is not set
+# CONFIG_SATA_SIL24 is not set
+CONFIG_ATA_SFF=y
+# CONFIG_SATA_SVW is not set
+# CONFIG_ATA_PIIX is not set
+# CONFIG_SATA_MV is not set
+# CONFIG_SATA_NV is not set
+# CONFIG_PDC_ADMA is not set
+# CONFIG_SATA_QSTOR is not set
+# CONFIG_SATA_PROMISE is not set
+# CONFIG_SATA_SX4 is not set
+CONFIG_SATA_SIL=y
+# CONFIG_SATA_SIS is not set
+# CONFIG_SATA_ULI is not set
+# CONFIG_SATA_VIA is not set
+# CONFIG_SATA_VITESSE is not set
+# CONFIG_SATA_INIC162X is not set
+# CONFIG_PATA_ALI is not set
+# CONFIG_PATA_AMD is not set
+# CONFIG_PATA_ARTOP is not set
+# CONFIG_PATA_ATIIXP is not set
+# CONFIG_PATA_CMD640_PCI is not set
+# CONFIG_PATA_CMD64X is not set
+# CONFIG_PATA_CS5520 is not set
+# CONFIG_PATA_CS5530 is not set
+# CONFIG_PATA_CYPRESS is not set
+# CONFIG_PATA_EFAR is not set
+# CONFIG_ATA_GENERIC is not set
+# CONFIG_PATA_HPT366 is not set
+# CONFIG_PATA_HPT37X is not set
+# CONFIG_PATA_HPT3X2N is not set
+# CONFIG_PATA_HPT3X3 is not set
+# CONFIG_PATA_IT821X is not set
+# CONFIG_PATA_IT8213 is not set
+# CONFIG_PATA_JMICRON is not set
+# CONFIG_PATA_TRIFLEX is not set
+# CONFIG_PATA_MARVELL is not set
+# CONFIG_PATA_MPIIX is not set
+# CONFIG_PATA_OLDPIIX is not set
+# CONFIG_PATA_NETCELL is not set
+# CONFIG_PATA_NINJA32 is not set
+# CONFIG_PATA_NS87410 is not set
+# CONFIG_PATA_NS87415 is not set
+# CONFIG_PATA_OPTI is not set
+# CONFIG_PATA_OPTIDMA is not set
+# CONFIG_PATA_PDC_OLD is not set
+# CONFIG_PATA_RADISYS is not set
+# CONFIG_PATA_RZ1000 is not set
+# CONFIG_PATA_SC1200 is not set
+# CONFIG_PATA_SERVERWORKS is not set
+# CONFIG_PATA_PDC2027X is not set
+# CONFIG_PATA_SIL680 is not set
+# CONFIG_PATA_SIS is not set
+# CONFIG_PATA_VIA is not set
+# CONFIG_PATA_WINBOND is not set
+# CONFIG_PATA_PLATFORM is not set
+# CONFIG_PATA_SCH is not set
+# CONFIG_MD is not set
+# CONFIG_FUSION is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+
+#
+# Enable only one of the two stacks, unless you know what you are doing
+#
+# CONFIG_FIREWIRE is not set
+# CONFIG_IEEE1394 is not set
+# CONFIG_I2O is not set
+CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+# CONFIG_ARCNET is not set
+# CONFIG_NET_ETHERNET is not set
+CONFIG_NETDEV_1000=y
+# CONFIG_ACENIC is not set
+# CONFIG_DL2K is not set
+# CONFIG_E1000 is not set
+# CONFIG_E1000E is not set
+# CONFIG_E1000E_ENABLED is not set
+# CONFIG_IP1000 is not set
+# CONFIG_IGB is not set
+# CONFIG_NS83820 is not set
+# CONFIG_HAMACHI is not set
+# CONFIG_YELLOWFIN is not set
+CONFIG_R8169=y
+# CONFIG_R8169_NAPI is not set
+# CONFIG_SIS190 is not set
+# CONFIG_SKGE is not set
+# CONFIG_SKY2 is not set
+# CONFIG_VIA_VELOCITY is not set
+# CONFIG_TIGON3 is not set
+# CONFIG_BNX2 is not set
+# CONFIG_QLA3XXX is not set
+# CONFIG_ATL1 is not set
+# CONFIG_NETDEV_10000 is not set
+# CONFIG_TR is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
+# CONFIG_WAN is not set
+# CONFIG_FDDI is not set
+# CONFIG_HIPPI is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NET_FC is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ATKBD is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_SH_KEYSC is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+CONFIG_VT_HW_CONSOLE_BINDING=y
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_NOZOMI is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_SH_SCI=y
+CONFIG_SERIAL_SH_SCI_NR_UARTS=6
+CONFIG_SERIAL_SH_SCI_CONSOLE=y
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_JSM is not set
+CONFIG_UNIX98_PTYS=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_IPMI_HANDLER is not set
+CONFIG_HW_RANDOM=y
+# CONFIG_R3964 is not set
+# CONFIG_APPLICOM is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_DEVPORT=y
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+# CONFIG_I2C_CHARDEV is not set
+CONFIG_I2C_ALGOPCA=y
+
+#
+# I2C Hardware Bus support
+#
+# CONFIG_I2C_ALI1535 is not set
+# CONFIG_I2C_ALI1563 is not set
+# CONFIG_I2C_ALI15X3 is not set
+# CONFIG_I2C_AMD756 is not set
+# CONFIG_I2C_AMD8111 is not set
+# CONFIG_I2C_I801 is not set
+# CONFIG_I2C_I810 is not set
+# CONFIG_I2C_PIIX4 is not set
+# CONFIG_I2C_NFORCE2 is not set
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_PROSAVAGE is not set
+# CONFIG_I2C_SAVAGE4 is not set
+# CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_SIS5595 is not set
+# CONFIG_I2C_SIS630 is not set
+# CONFIG_I2C_SIS96X is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_STUB is not set
+# CONFIG_I2C_TINY_USB is not set
+# CONFIG_I2C_VIA is not set
+# CONFIG_I2C_VIAPRO is not set
+# CONFIG_I2C_VOODOO3 is not set
+CONFIG_I2C_PCA_PLATFORM=y
+# CONFIG_I2C_SH_MOBILE is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_DS1682 is not set
+# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+# CONFIG_SPI is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+# CONFIG_WATCHDOG is not set
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+CONFIG_MFD_SM501=y
+# CONFIG_HTC_PASIC3 is not set
+
+#
+# Multimedia devices
+#
+
+#
+# Multimedia core support
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
+# CONFIG_DAB is not set
+
+#
+# Graphics support
+#
+# CONFIG_DRM is not set
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
+# CONFIG_FB_SYS_FOPS is not set
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_CIRRUS is not set
+# CONFIG_FB_PM2 is not set
+# CONFIG_FB_CYBER2000 is not set
+# CONFIG_FB_ASILIANT is not set
+# CONFIG_FB_IMSTT is not set
+# CONFIG_FB_S1D13XXX is not set
+# CONFIG_FB_NVIDIA is not set
+# CONFIG_FB_RIVA is not set
+# CONFIG_FB_MATROX is not set
+# CONFIG_FB_RADEON is not set
+# CONFIG_FB_ATY128 is not set
+# CONFIG_FB_ATY is not set
+# CONFIG_FB_S3 is not set
+# CONFIG_FB_SAVAGE is not set
+# CONFIG_FB_SIS is not set
+# CONFIG_FB_NEOMAGIC is not set
+# CONFIG_FB_KYRO is not set
+# CONFIG_FB_3DFX is not set
+# CONFIG_FB_VOODOO1 is not set
+# CONFIG_FB_VT8623 is not set
+# CONFIG_FB_TRIDENT is not set
+# CONFIG_FB_ARK is not set
+# CONFIG_FB_PM3 is not set
+CONFIG_FB_SM501=y
+# CONFIG_FB_VIRTUAL is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
+# CONFIG_FONTS is not set
+CONFIG_FONT_8x8=y
+CONFIG_FONT_8x16=y
+CONFIG_LOGO=y
+# CONFIG_LOGO_LINUX_MONO is not set
+# CONFIG_LOGO_LINUX_VGA16 is not set
+CONFIG_LOGO_LINUX_CLUT224=y
+# CONFIG_LOGO_SUPERH_MONO is not set
+# CONFIG_LOGO_SUPERH_VGA16 is not set
+# CONFIG_LOGO_SUPERH_CLUT224 is not set
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+# CONFIG_HID_DEBUG is not set
+# CONFIG_HIDRAW is not set
+
+#
+# USB Input Devices
+#
+CONFIG_USB_HID=y
+# CONFIG_USB_HIDINPUT_POWERBOOK is not set
+# CONFIG_HID_FF is not set
+# CONFIG_USB_HIDDEV is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB_ARCH_HAS_EHCI=y
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
+
+#
+# Miscellaneous USB options
+#
+CONFIG_USB_DEVICEFS=y
+CONFIG_USB_DEVICE_CLASS=y
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_OTG is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_C67X00_HCD is not set
+CONFIG_USB_EHCI_HCD=m
+# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
+# CONFIG_USB_EHCI_TT_NEWSCHED is not set
+# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
+CONFIG_USB_OHCI_HCD=m
+# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+# CONFIG_USB_UHCI_HCD is not set
+# CONFIG_USB_SL811_HCD is not set
+CONFIG_USB_R8A66597_HCD=y
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# may also be needed; see USB_STORAGE Help for more information
+#
+CONFIG_USB_STORAGE=y
+# CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_ISD200 is not set
+# CONFIG_USB_STORAGE_DPCM is not set
+# CONFIG_USB_STORAGE_USBAT is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_ONETOUCH is not set
+# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+CONFIG_USB_MON=y
+
+#
+# USB port drivers
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_AUERSWALD is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_PHIDGET is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_SISUSBVGA is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+CONFIG_USB_TEST=m
+# CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_GADGET is not set
+# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
+# CONFIG_INFINIBAND is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+CONFIG_RTC_DRV_RS5C372=y
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
+
+#
+# SPI RTC drivers
+#
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+# CONFIG_RTC_DRV_SH is not set
+# CONFIG_UIO is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+CONFIG_EXT3_FS_XATTR=y
+# CONFIG_EXT3_FS_POSIX_ACL is not set
+# CONFIG_EXT3_FS_SECURITY is not set
+# CONFIG_EXT4DEV_FS is not set
+CONFIG_JBD=y
+CONFIG_FS_MBCACHE=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+CONFIG_FS_POSIX_ACL=y
+# CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+CONFIG_NTFS_FS=y
+# CONFIG_NTFS_DEBUG is not set
+CONFIG_NTFS_RW=y
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_KCORE=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLBFS is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_JFFS2_FS is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_VXFS_FS is not set
+CONFIG_MINIX_FS=y
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+CONFIG_NFS_V4=y
+CONFIG_NFSD=y
+CONFIG_NFSD_V3=y
+# CONFIG_NFSD_V3_ACL is not set
+CONFIG_NFSD_V4=y
+CONFIG_ROOT_NFS=y
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_EXPORTFS=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+CONFIG_SUNRPC_GSS=y
+# CONFIG_SUNRPC_BIND34 is not set
+CONFIG_RPCSEC_GSS_KRB5=y
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+CONFIG_NLS_CODEPAGE_932=y
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+CONFIG_NLS_ISO8859_1=y
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+# CONFIG_PRINTK_TIME is not set
+# CONFIG_ENABLE_WARN_DEPRECATED is not set
+# CONFIG_ENABLE_MUST_CHECK is not set
+CONFIG_FRAME_WARN=1024
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_DEBUG_SLAB is not set
+CONFIG_DEBUG_PREEMPT=y
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_FRAME_POINTER is not set
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_SAMPLES is not set
+# CONFIG_SH_STANDARD_BIOS is not set
+# CONFIG_EARLY_SCIF_CONSOLE is not set
+# CONFIG_DEBUG_BOOTMEM is not set
+# CONFIG_DEBUG_STACKOVERFLOW is not set
+# CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_4KSTACKS is not set
+# CONFIG_IRQSTACKS is not set
+# CONFIG_SH_KGDB is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_MANAGER=y
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+CONFIG_CRYPTO_HMAC=y
+# CONFIG_CRYPTO_XCBC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_MD4 is not set
+CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_LZO is not set
+# CONFIG_CRYPTO_HW is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
diff --git a/arch/sh/drivers/dma/dma-g2.c b/arch/sh/drivers/dma/dma-g2.c
index 0caf11bb7e27..af7bb589c2c8 100644
--- a/arch/sh/drivers/dma/dma-g2.c
+++ b/arch/sh/drivers/dma/dma-g2.c
@@ -14,8 +14,8 @@
 #include <linux/module.h>
 #include <linux/interrupt.h>
 #include <asm/cacheflush.h>
-#include <asm/mach/sysasic.h>
-#include <asm/mach/dma.h>
+#include <mach/sysasic.h>
+#include <mach/dma.h>
 #include <asm/dma.h>
 
 struct g2_channel {
diff --git a/arch/sh/drivers/dma/dma-pvr2.c b/arch/sh/drivers/dma/dma-pvr2.c
index 838fad566eaf..391cbe1c2956 100644
--- a/arch/sh/drivers/dma/dma-pvr2.c
+++ b/arch/sh/drivers/dma/dma-pvr2.c
@@ -13,8 +13,8 @@
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/interrupt.h>
-#include <asm/mach/sysasic.h>
-#include <asm/mach/dma.h>
+#include <mach/sysasic.h>
+#include <mach/dma.h>
 #include <asm/dma.h>
 #include <asm/io.h>
 
diff --git a/arch/sh/drivers/dma/dma-sh.c b/arch/sh/drivers/dma/dma-sh.c
index 71ff3d6f26e2..b2ffe649c7c0 100644
--- a/arch/sh/drivers/dma/dma-sh.c
+++ b/arch/sh/drivers/dma/dma-sh.c
@@ -14,7 +14,7 @@
 #include <linux/init.h>
 #include <linux/interrupt.h>
 #include <linux/module.h>
-#include <asm/dreamcast/dma.h>
+#include <mach-dreamcast/mach/dma.h>
 #include <asm/dma.h>
 #include <asm/io.h>
 #include "dma-sh.h"
diff --git a/arch/sh/drivers/dma/dma-sh.h b/arch/sh/drivers/dma/dma-sh.h
index 0f591fbc922d..b05af34fc15d 100644
--- a/arch/sh/drivers/dma/dma-sh.h
+++ b/arch/sh/drivers/dma/dma-sh.h
@@ -11,7 +11,7 @@
 #ifndef __DMA_SH_H
 #define __DMA_SH_H
 
-#include <asm/cpu/dma.h>
+#include <cpu/dma.h>
 
 /* Definitions for the SuperH DMAC */
 #define REQ_L	0x00000000
diff --git a/arch/sh/drivers/pci/Makefile b/arch/sh/drivers/pci/Makefile
index 0718805774e8..847e90894d1b 100644
--- a/arch/sh/drivers/pci/Makefile
+++ b/arch/sh/drivers/pci/Makefile
@@ -23,3 +23,4 @@ obj-$(CONFIG_SH_LANDISK)		+= ops-landisk.o
 obj-$(CONFIG_SH_LBOX_RE2)		+= ops-lboxre2.o fixups-lboxre2.o
 obj-$(CONFIG_SH_7780_SOLUTION_ENGINE)	+= ops-se7780.o fixups-se7780.o
 obj-$(CONFIG_SH_CAYMAN)			+= ops-cayman.o
+obj-$(CONFIG_SH_SH7785LCR)		+= ops-sh7785lcr.o fixups-sh7785lcr.o
diff --git a/arch/sh/drivers/pci/fixups-dreamcast.c b/arch/sh/drivers/pci/fixups-dreamcast.c
index c44699301eeb..2bf85cf091e1 100644
--- a/arch/sh/drivers/pci/fixups-dreamcast.c
+++ b/arch/sh/drivers/pci/fixups-dreamcast.c
@@ -26,7 +26,7 @@
 
 #include <asm/io.h>
 #include <asm/irq.h>
-#include <asm/mach/pci.h>
+#include <mach/pci.h>
 
 static void __init gapspci_fixup_resources(struct pci_dev *dev)
 {
diff --git a/arch/sh/drivers/pci/fixups-sh7785lcr.c b/arch/sh/drivers/pci/fixups-sh7785lcr.c
new file mode 100644
index 000000000000..4949e601387a
--- /dev/null
+++ b/arch/sh/drivers/pci/fixups-sh7785lcr.c
@@ -0,0 +1,46 @@
+/*
+ * arch/sh/drivers/pci/fixups-sh7785lcr.c
+ *
+ * R0P7785LC0011RL PCI fixups
+ * Copyright (C) 2008  Yoshihiro Shimoda
+ *
+ * Based on arch/sh/drivers/pci/fixups-r7780rp.c
+ * Copyright (C) 2003  Lineo uSolutions, Inc.
+ * Copyright (C) 2004 - 2006  Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/pci.h>
+#include "pci-sh4.h"
+
+int pci_fixup_pcic(void)
+{
+	pci_write_reg(0x000043ff, SH4_PCIINTM);
+	pci_write_reg(0x0000380f, SH4_PCIAINTM);
+
+	pci_write_reg(0xfbb00047, SH7780_PCICMD);
+	pci_write_reg(0x00000000, SH7780_PCIIBAR);
+
+	pci_write_reg(0x00011912, SH7780_PCISVID);
+	pci_write_reg(0x08000000, SH7780_PCICSCR0);
+	pci_write_reg(0x0000001b, SH7780_PCICSAR0);
+	pci_write_reg(0xfd000000, SH7780_PCICSCR1);
+	pci_write_reg(0x0000000f, SH7780_PCICSAR1);
+
+	pci_write_reg(0xfd000000, SH7780_PCIMBR0);
+	pci_write_reg(0x00fc0000, SH7780_PCIMBMR0);
+
+#ifdef CONFIG_32BIT
+	pci_write_reg(0xc0000000, SH7780_PCIMBR2);
+	pci_write_reg(0x20000000 - SH7780_PCI_IO_SIZE, SH7780_PCIMBMR2);
+#endif
+
+	/* Set IOBR for windows containing area specified in pci.h */
+	pci_write_reg((PCIBIOS_MIN_IO & ~(SH7780_PCI_IO_SIZE - 1)),
+		      SH7780_PCIIOBR);
+	pci_write_reg(((SH7780_PCI_IO_SIZE - 1) & (7 << 18)), SH7780_PCIIOBMR);
+
+	return 0;
+}
diff --git a/arch/sh/drivers/pci/ops-cayman.c b/arch/sh/drivers/pci/ops-cayman.c
index 980275ffa30b..5ccf9ea3a9de 100644
--- a/arch/sh/drivers/pci/ops-cayman.c
+++ b/arch/sh/drivers/pci/ops-cayman.c
@@ -2,7 +2,7 @@
 #include <linux/init.h>
 #include <linux/pci.h>
 #include <linux/types.h>
-#include <asm/cpu/irq.h>
+#include <cpu/irq.h>
 #include "pci-sh5.h"
 
 static inline u8 bridge_swizzle(u8 pin, u8 slot)
diff --git a/arch/sh/drivers/pci/ops-dreamcast.c b/arch/sh/drivers/pci/ops-dreamcast.c
index e1284fc69361..f5d2a2aa6f3f 100644
--- a/arch/sh/drivers/pci/ops-dreamcast.c
+++ b/arch/sh/drivers/pci/ops-dreamcast.c
@@ -22,10 +22,11 @@
 #include <linux/init.h>
 #include <linux/irq.h>
 #include <linux/pci.h>
+#include <linux/module.h>
 
 #include <asm/io.h>
 #include <asm/irq.h>
-#include <asm/mach/pci.h>
+#include <mach/pci.h>
 
 static struct resource gapspci_io_resource = {
 	.name	= "GAPSPCI IO",
@@ -48,6 +49,7 @@ struct pci_channel board_pci_channels[] = {
 	  &gapspci_mem_resource, 0, 1 },
 	{ 0, }
 };
+EXPORT_SYMBOL(board_pci_channels);
 
 /*
  * The !gapspci_config_access case really shouldn't happen, ever, unless
diff --git a/arch/sh/drivers/pci/ops-se7780.c b/arch/sh/drivers/pci/ops-se7780.c
index bbdb48c124a2..3145c62484d6 100644
--- a/arch/sh/drivers/pci/ops-se7780.c
+++ b/arch/sh/drivers/pci/ops-se7780.c
@@ -13,7 +13,7 @@
 #include <linux/init.h>
 #include <linux/delay.h>
 #include <linux/pci.h>
-#include <asm/se7780.h>
+#include <mach-se/mach/se7780.h>
 #include <asm/io.h>
 #include "pci-sh4.h"
 
diff --git a/arch/sh/drivers/pci/ops-sh7785lcr.c b/arch/sh/drivers/pci/ops-sh7785lcr.c
new file mode 100644
index 000000000000..b3bd68702059
--- /dev/null
+++ b/arch/sh/drivers/pci/ops-sh7785lcr.c
@@ -0,0 +1,66 @@
+/*
+ * Author:  Ian DaSilva (idasilva@mvista.com)
+ *
+ * Highly leveraged from pci-bigsur.c, written by Dustin McIntire.
+ *
+ * May be copied or modified under the terms of the GNU General Public
+ * License.  See linux/COPYING for more information.
+ *
+ * PCI initialization for the Renesas R0P7785LC0011RL board
+ * Based on arch/sh/drivers/pci/ops-r7780rp.c
+ *
+ */
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/pci.h>
+#include "pci-sh4.h"
+
+static char irq_tab[] __initdata = {
+	65, 66, 67, 68,
+};
+
+int __init pcibios_map_platform_irq(struct pci_dev *pdev, u8 slot, u8 pin)
+{
+	return irq_tab[slot];
+}
+
+static struct resource sh7785_io_resource = {
+	.name	= "SH7785_IO",
+	.start	= SH7780_PCI_IO_BASE,
+	.end	= SH7780_PCI_IO_BASE + SH7780_PCI_IO_SIZE - 1,
+	.flags	= IORESOURCE_IO
+};
+
+static struct resource sh7785_mem_resource = {
+	.name	= "SH7785_mem",
+	.start	= SH7780_PCI_MEMORY_BASE,
+	.end	= SH7780_PCI_MEMORY_BASE + SH7780_PCI_MEM_SIZE - 1,
+	.flags	= IORESOURCE_MEM
+};
+
+struct pci_channel board_pci_channels[] = {
+	{ &sh4_pci_ops, &sh7785_io_resource, &sh7785_mem_resource, 0, 0xff },
+	{ NULL, NULL, NULL, 0, 0 },
+};
+EXPORT_SYMBOL(board_pci_channels);
+
+static struct sh4_pci_address_map sh7785_pci_map = {
+	.window0	= {
+		.base	= SH7780_CS2_BASE_ADDR,
+		.size	= 0x04000000,
+	},
+
+	.window1	= {
+		.base	= SH7780_CS3_BASE_ADDR,
+		.size	= 0x04000000,
+	},
+
+	.flags	= SH4_PCIC_NO_RESET,
+};
+
+int __init pcibios_init_platform(void)
+{
+	return sh7780_pcic_init(&sh7785_pci_map);
+}
diff --git a/arch/sh/drivers/pci/pci-auto.c b/arch/sh/drivers/pci/pci-auto.c
index ea404704ace8..cf48b12ee58c 100644
--- a/arch/sh/drivers/pci/pci-auto.c
+++ b/arch/sh/drivers/pci/pci-auto.c
@@ -78,7 +78,7 @@ static struct pci_dev *fake_pci_dev(struct pci_channel *hose,
 }
 
 #define EARLY_PCI_OP(rw, size, type)					\
-int early_##rw##_config_##size(struct pci_channel *hose,		\
+static int early_##rw##_config_##size(struct pci_channel *hose,		\
 	int top_bus, int bus, int devfn, int offset, type value)	\
 {									\
 	return pci_##rw##_config_##size(				\
diff --git a/arch/sh/drivers/pci/pci-sh5.c b/arch/sh/drivers/pci/pci-sh5.c
index a00a4df8c02d..7a97438762c8 100644
--- a/arch/sh/drivers/pci/pci-sh5.c
+++ b/arch/sh/drivers/pci/pci-sh5.c
@@ -19,7 +19,7 @@
 #include <linux/delay.h>
 #include <linux/types.h>
 #include <linux/irq.h>
-#include <asm/cpu/irq.h>
+#include <cpu/irq.h>
 #include <asm/pci.h>
 #include <asm/io.h>
 #include "pci-sh5.h"
diff --git a/arch/sh/drivers/pci/pci.c b/arch/sh/drivers/pci/pci.c
index f57095a2617c..d3839e609aac 100644
--- a/arch/sh/drivers/pci/pci.c
+++ b/arch/sh/drivers/pci/pci.c
@@ -135,7 +135,7 @@ int pcibios_enable_device(struct pci_dev *dev, int mask)
  *  If we set up a device for bus mastering, we need to check and set
  *  the latency timer as it may not be properly set.
  */
-unsigned int pcibios_max_latency = 255;
+static unsigned int pcibios_max_latency = 255;
 
 void pcibios_set_master(struct pci_dev *dev)
 {
diff --git a/arch/sh/include/asm/.gitignore b/arch/sh/include/asm/.gitignore
new file mode 100644
index 000000000000..378db779fb6c
--- /dev/null
+++ b/arch/sh/include/asm/.gitignore
@@ -0,0 +1 @@
+machtypes.h
diff --git a/include/asm-sh/Kbuild b/arch/sh/include/asm/Kbuild
index 43910cdf78a5..43910cdf78a5 100644
--- a/include/asm-sh/Kbuild
+++ b/arch/sh/include/asm/Kbuild
diff --git a/include/asm-sh/adc.h b/arch/sh/include/asm/adc.h
index 5f85cf74d59d..48824c1fab80 100644
--- a/include/asm-sh/adc.h
+++ b/arch/sh/include/asm/adc.h
@@ -5,7 +5,7 @@
  * Copyright (C) 2004  Andriy Skulysh
  */
 
-#include <asm/cpu/adc.h>
+#include <cpu/adc.h>
 
 int adc_single(unsigned int channel);
 
diff --git a/arch/sh/include/asm/addrspace.h b/arch/sh/include/asm/addrspace.h
new file mode 100644
index 000000000000..2702d81bfc0d
--- /dev/null
+++ b/arch/sh/include/asm/addrspace.h
@@ -0,0 +1,53 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1999 by Kaz Kojima
+ *
+ * Defitions for the address spaces of the SH CPUs.
+ */
+#ifndef __ASM_SH_ADDRSPACE_H
+#define __ASM_SH_ADDRSPACE_H
+
+#ifdef __KERNEL__
+
+#include <cpu/addrspace.h>
+
+/* If this CPU supports segmentation, hook up the helpers */
+#ifdef P1SEG
+
+/*
+   [ P0/U0 (virtual) ]		0x00000000     <------ User space
+   [ P1 (fixed)   cached ]	0x80000000     <------ Kernel space
+   [ P2 (fixed)  non-cachable]	0xA0000000     <------ Physical access
+   [ P3 (virtual) cached]	0xC0000000     <------ vmalloced area
+   [ P4 control   ]		0xE0000000
+ */
+
+/* Returns the privileged segment base of a given address  */
+#define PXSEG(a)	(((unsigned long)(a)) & 0xe0000000)
+
+/* Returns the physical address of a PnSEG (n=1,2) address   */
+#define PHYSADDR(a)	(((unsigned long)(a)) & 0x1fffffff)
+
+#ifdef CONFIG_29BIT
+/*
+ * Map an address to a certain privileged segment
+ */
+#define P1SEGADDR(a)	\
+	((__typeof__(a))(((unsigned long)(a) & 0x1fffffff) | P1SEG))
+#define P2SEGADDR(a)	\
+	((__typeof__(a))(((unsigned long)(a) & 0x1fffffff) | P2SEG))
+#define P3SEGADDR(a)	\
+	((__typeof__(a))(((unsigned long)(a) & 0x1fffffff) | P3SEG))
+#define P4SEGADDR(a)	\
+	((__typeof__(a))(((unsigned long)(a) & 0x1fffffff) | P4SEG))
+#endif /* 29BIT */
+#endif /* P1SEG */
+
+/* Check if an address can be reached in 29 bits */
+#define IS_29BIT(a)	(((unsigned long)(a)) < 0x20000000)
+
+#endif /* __KERNEL__ */
+#endif /* __ASM_SH_ADDRSPACE_H */
diff --git a/include/asm-sh/atomic-grb.h b/arch/sh/include/asm/atomic-grb.h
index 4c5b7dbfcedb..4c5b7dbfcedb 100644
--- a/include/asm-sh/atomic-grb.h
+++ b/arch/sh/include/asm/atomic-grb.h
diff --git a/include/asm-sh/atomic-irq.h b/arch/sh/include/asm/atomic-irq.h
index 74f7943cff6f..74f7943cff6f 100644
--- a/include/asm-sh/atomic-irq.h
+++ b/arch/sh/include/asm/atomic-irq.h
diff --git a/include/asm-sh/atomic-llsc.h b/arch/sh/include/asm/atomic-llsc.h
index 4b00b78e3f4f..4b00b78e3f4f 100644
--- a/include/asm-sh/atomic-llsc.h
+++ b/arch/sh/include/asm/atomic-llsc.h
diff --git a/include/asm-sh/atomic.h b/arch/sh/include/asm/atomic.h
index c043ef003028..c043ef003028 100644
--- a/include/asm-sh/atomic.h
+++ b/arch/sh/include/asm/atomic.h
diff --git a/arch/sh/include/asm/auxvec.h b/arch/sh/include/asm/auxvec.h
new file mode 100644
index 000000000000..483effd65e00
--- /dev/null
+++ b/arch/sh/include/asm/auxvec.h
@@ -0,0 +1,36 @@
+#ifndef __ASM_SH_AUXVEC_H
+#define __ASM_SH_AUXVEC_H
+
+/*
+ * Architecture-neutral AT_ values in 0-17, leave some room
+ * for more of them.
+ */
+
+/*
+ * This entry gives some information about the FPU initialization
+ * performed by the kernel.
+ */
+#define AT_FPUCW		18	/* Used FPU control word.  */
+
+#if defined(CONFIG_VSYSCALL) || !defined(__KERNEL__)
+/*
+ * Only define this in the vsyscall case, the entry point to
+ * the vsyscall page gets placed here. The kernel will attempt
+ * to build a gate VMA we don't care about otherwise..
+ */
+#define AT_SYSINFO_EHDR		33
+#endif
+
+/*
+ * More complete cache descriptions than AT_[DIU]CACHEBSIZE.  If the
+ * value is -1, then the cache doesn't exist.  Otherwise:
+ *
+ *    bit 0-3:	  Cache set-associativity; 0 means fully associative.
+ *    bit 4-7:	  Log2 of cacheline size.
+ *    bit 8-31:	  Size of the entire cache >> 8.
+ */
+#define AT_L1I_CACHESHAPE	34
+#define AT_L1D_CACHESHAPE	35
+#define AT_L2_CACHESHAPE	36
+
+#endif /* __ASM_SH_AUXVEC_H */
diff --git a/include/asm-sh/bitops-grb.h b/arch/sh/include/asm/bitops-grb.h
index a5907b94395b..a5907b94395b 100644
--- a/include/asm-sh/bitops-grb.h
+++ b/arch/sh/include/asm/bitops-grb.h
diff --git a/include/asm-sh/bitops-irq.h b/arch/sh/include/asm/bitops-irq.h
index 653a12750584..653a12750584 100644
--- a/include/asm-sh/bitops-irq.h
+++ b/arch/sh/include/asm/bitops-irq.h
diff --git a/include/asm-sh/bitops.h b/arch/sh/include/asm/bitops.h
index d7d382f63ee5..d7d382f63ee5 100644
--- a/include/asm-sh/bitops.h
+++ b/arch/sh/include/asm/bitops.h
diff --git a/include/asm-sh/bug.h b/arch/sh/include/asm/bug.h
index c01718040166..c01718040166 100644
--- a/include/asm-sh/bug.h
+++ b/arch/sh/include/asm/bug.h
diff --git a/include/asm-sh/bugs.h b/arch/sh/include/asm/bugs.h
index 121b2ecddfc3..121b2ecddfc3 100644
--- a/include/asm-sh/bugs.h
+++ b/arch/sh/include/asm/bugs.h
diff --git a/include/asm-sh/byteorder.h b/arch/sh/include/asm/byteorder.h
index 4c13e6117563..4c13e6117563 100644
--- a/include/asm-sh/byteorder.h
+++ b/arch/sh/include/asm/byteorder.h
diff --git a/arch/sh/include/asm/cache.h b/arch/sh/include/asm/cache.h
new file mode 100644
index 000000000000..02df18ea9608
--- /dev/null
+++ b/arch/sh/include/asm/cache.h
@@ -0,0 +1,51 @@
+/* $Id: cache.h,v 1.6 2004/03/11 18:08:05 lethal Exp $
+ *
+ * include/asm-sh/cache.h
+ *
+ * Copyright 1999 (C) Niibe Yutaka
+ * Copyright 2002, 2003 (C) Paul Mundt
+ */
+#ifndef __ASM_SH_CACHE_H
+#define __ASM_SH_CACHE_H
+#ifdef __KERNEL__
+
+#include <linux/init.h>
+#include <cpu/cache.h>
+
+#define L1_CACHE_BYTES		(1 << L1_CACHE_SHIFT)
+
+#define __read_mostly __attribute__((__section__(".data.read_mostly")))
+
+#ifndef __ASSEMBLY__
+struct cache_info {
+	unsigned int ways;		/* Number of cache ways */
+	unsigned int sets;		/* Number of cache sets */
+	unsigned int linesz;		/* Cache line size (bytes) */
+
+	unsigned int way_size;		/* sets * line size */
+
+	/*
+	 * way_incr is the address offset for accessing the next way
+	 * in memory mapped cache array ops.
+	 */
+	unsigned int way_incr;
+	unsigned int entry_shift;
+	unsigned int entry_mask;
+
+	/*
+	 * Compute a mask which selects the address bits which overlap between
+	 * 1. those used to select the cache set during indexing
+	 * 2. those in the physical page number.
+	 */
+	unsigned int alias_mask;
+
+	unsigned int n_aliases;		/* Number of aliases */
+
+	unsigned long flags;
+};
+
+int __init detect_cpu_and_cache_system(void);
+
+#endif /* __ASSEMBLY__ */
+#endif /* __KERNEL__ */
+#endif /* __ASM_SH_CACHE_H */
diff --git a/arch/sh/include/asm/cacheflush.h b/arch/sh/include/asm/cacheflush.h
new file mode 100644
index 000000000000..09acbc32d6c7
--- /dev/null
+++ b/arch/sh/include/asm/cacheflush.h
@@ -0,0 +1,81 @@
+#ifndef __ASM_SH_CACHEFLUSH_H
+#define __ASM_SH_CACHEFLUSH_H
+
+#ifdef __KERNEL__
+
+#ifdef CONFIG_CACHE_OFF
+/*
+ * Nothing to do when the cache is disabled, initial flush and explicit
+ * disabling is handled at CPU init time.
+ *
+ * See arch/sh/kernel/cpu/init.c:cache_init().
+ */
+#define p3_cache_init()				do { } while (0)
+#define flush_cache_all()			do { } while (0)
+#define flush_cache_mm(mm)			do { } while (0)
+#define flush_cache_dup_mm(mm)			do { } while (0)
+#define flush_cache_range(vma, start, end)	do { } while (0)
+#define flush_cache_page(vma, vmaddr, pfn)	do { } while (0)
+#define flush_dcache_page(page)			do { } while (0)
+#define flush_icache_range(start, end)		do { } while (0)
+#define flush_icache_page(vma,pg)		do { } while (0)
+#define flush_dcache_mmap_lock(mapping)		do { } while (0)
+#define flush_dcache_mmap_unlock(mapping)	do { } while (0)
+#define flush_cache_sigtramp(vaddr)		do { } while (0)
+#define flush_icache_user_range(vma,pg,adr,len)	do { } while (0)
+#define __flush_wback_region(start, size)	do { (void)(start); } while (0)
+#define __flush_purge_region(start, size)	do { (void)(start); } while (0)
+#define __flush_invalidate_region(start, size)	do { (void)(start); } while (0)
+#else
+#include <cpu/cacheflush.h>
+
+/*
+ * Consistent DMA requires that the __flush_xxx() primitives must be set
+ * for any of the enabled non-coherent caches (most of the UP CPUs),
+ * regardless of PIPT or VIPT cache configurations.
+ */
+
+/* Flush (write-back only) a region (smaller than a page) */
+extern void __flush_wback_region(void *start, int size);
+/* Flush (write-back & invalidate) a region (smaller than a page) */
+extern void __flush_purge_region(void *start, int size);
+/* Flush (invalidate only) a region (smaller than a page) */
+extern void __flush_invalidate_region(void *start, int size);
+#endif
+
+#define ARCH_HAS_FLUSH_KERNEL_DCACHE_PAGE
+static inline void flush_kernel_dcache_page(struct page *page)
+{
+	flush_dcache_page(page);
+}
+
+#if defined(CONFIG_CPU_SH4) && !defined(CONFIG_CACHE_OFF)
+extern void copy_to_user_page(struct vm_area_struct *vma,
+	struct page *page, unsigned long vaddr, void *dst, const void *src,
+	unsigned long len);
+
+extern void copy_from_user_page(struct vm_area_struct *vma,
+	struct page *page, unsigned long vaddr, void *dst, const void *src,
+	unsigned long len);
+#else
+#define copy_to_user_page(vma, page, vaddr, dst, src, len)	\
+	do {							\
+		flush_cache_page(vma, vaddr, page_to_pfn(page));\
+		memcpy(dst, src, len);				\
+		flush_icache_user_range(vma, page, vaddr, len);	\
+	} while (0)
+
+#define copy_from_user_page(vma, page, vaddr, dst, src, len)	\
+	do {							\
+		flush_cache_page(vma, vaddr, page_to_pfn(page));\
+		memcpy(dst, src, len);				\
+	} while (0)
+#endif
+
+#define flush_cache_vmap(start, end)		flush_cache_all()
+#define flush_cache_vunmap(start, end)		flush_cache_all()
+
+#define HAVE_ARCH_UNMAPPED_AREA
+
+#endif /* __KERNEL__ */
+#endif /* __ASM_SH_CACHEFLUSH_H */
diff --git a/include/asm-sh/checksum.h b/arch/sh/include/asm/checksum.h
index 67496ab0ef04..67496ab0ef04 100644
--- a/include/asm-sh/checksum.h
+++ b/arch/sh/include/asm/checksum.h
diff --git a/include/asm-sh/checksum_32.h b/arch/sh/include/asm/checksum_32.h
index 14b7ac2f0a07..14b7ac2f0a07 100644
--- a/include/asm-sh/checksum_32.h
+++ b/arch/sh/include/asm/checksum_32.h
diff --git a/include/asm-sh/checksum_64.h b/arch/sh/include/asm/checksum_64.h
index 9c62a031a8f5..9c62a031a8f5 100644
--- a/include/asm-sh/checksum_64.h
+++ b/arch/sh/include/asm/checksum_64.h
diff --git a/arch/sh/include/asm/clock.h b/arch/sh/include/asm/clock.h
new file mode 100644
index 000000000000..720dfab7b15e
--- /dev/null
+++ b/arch/sh/include/asm/clock.h
@@ -0,0 +1,97 @@
+#ifndef __ASM_SH_CLOCK_H
+#define __ASM_SH_CLOCK_H
+
+#include <linux/kref.h>
+#include <linux/list.h>
+#include <linux/seq_file.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+
+struct clk;
+
+struct clk_ops {
+	void (*init)(struct clk *clk);
+	void (*enable)(struct clk *clk);
+	void (*disable)(struct clk *clk);
+	void (*recalc)(struct clk *clk);
+	int (*set_rate)(struct clk *clk, unsigned long rate, int algo_id);
+	long (*round_rate)(struct clk *clk, unsigned long rate);
+};
+
+struct clk {
+	struct list_head	node;
+	const char		*name;
+	int			id;
+	struct module		*owner;
+
+	struct clk		*parent;
+	struct clk_ops		*ops;
+
+	struct kref		kref;
+
+	unsigned long		rate;
+	unsigned long		flags;
+	unsigned long		arch_flags;
+};
+
+#define CLK_ALWAYS_ENABLED	(1 << 0)
+#define CLK_RATE_PROPAGATES	(1 << 1)
+
+/* Should be defined by processor-specific code */
+void arch_init_clk_ops(struct clk_ops **, int type);
+
+/* arch/sh/kernel/cpu/clock.c */
+int clk_init(void);
+
+void clk_recalc_rate(struct clk *);
+
+int clk_register(struct clk *);
+void clk_unregister(struct clk *);
+
+static inline int clk_always_enable(const char *id)
+{
+	struct clk *clk;
+	int ret;
+
+	clk = clk_get(NULL, id);
+	if (IS_ERR(clk))
+		return PTR_ERR(clk);
+
+	ret = clk_enable(clk);
+	if (ret)
+		clk_put(clk);
+
+	return ret;
+}
+
+/* the exported API, in addition to clk_set_rate */
+/**
+ * clk_set_rate_ex - set the clock rate for a clock source, with additional parameter
+ * @clk: clock source
+ * @rate: desired clock rate in Hz
+ * @algo_id: algorithm id to be passed down to ops->set_rate
+ *
+ * Returns success (0) or negative errno.
+ */
+int clk_set_rate_ex(struct clk *clk, unsigned long rate, int algo_id);
+
+enum clk_sh_algo_id {
+	NO_CHANGE = 0,
+
+	IUS_N1_N1,
+	IUS_322,
+	IUS_522,
+	IUS_N11,
+
+	SB_N1,
+
+	SB3_N1,
+	SB3_32,
+	SB3_43,
+	SB3_54,
+
+	BP_N1,
+
+	IP_N1,
+};
+#endif /* __ASM_SH_CLOCK_H */
diff --git a/include/asm-sh/cmpxchg-grb.h b/arch/sh/include/asm/cmpxchg-grb.h
index e2681abe764f..e2681abe764f 100644
--- a/include/asm-sh/cmpxchg-grb.h
+++ b/arch/sh/include/asm/cmpxchg-grb.h
diff --git a/include/asm-sh/cmpxchg-irq.h b/arch/sh/include/asm/cmpxchg-irq.h
index 43049ec0554b..43049ec0554b 100644
--- a/include/asm-sh/cmpxchg-irq.h
+++ b/arch/sh/include/asm/cmpxchg-irq.h
diff --git a/include/asm-sh/cpu-features.h b/arch/sh/include/asm/cpu-features.h
index 86308aa39731..86308aa39731 100644
--- a/include/asm-sh/cpu-features.h
+++ b/arch/sh/include/asm/cpu-features.h
diff --git a/include/asm-sh/cputime.h b/arch/sh/include/asm/cputime.h
index 6ca395d1393e..6ca395d1393e 100644
--- a/include/asm-sh/cputime.h
+++ b/arch/sh/include/asm/cputime.h
diff --git a/include/asm-sh/current.h b/arch/sh/include/asm/current.h
index 62b63880b333..62b63880b333 100644
--- a/include/asm-sh/current.h
+++ b/arch/sh/include/asm/current.h
diff --git a/include/asm-sh/delay.h b/arch/sh/include/asm/delay.h
index 4b16bf9b56bd..4b16bf9b56bd 100644
--- a/include/asm-sh/delay.h
+++ b/arch/sh/include/asm/delay.h
diff --git a/arch/sh/include/asm/device.h b/arch/sh/include/asm/device.h
new file mode 100644
index 000000000000..efd511d0803a
--- /dev/null
+++ b/arch/sh/include/asm/device.h
@@ -0,0 +1,12 @@
+/*
+ * Arch specific extensions to struct device
+ *
+ * This file is released under the GPLv2
+ */
+#include <asm-generic/device.h>
+
+struct platform_device;
+/* allocate contiguous memory chunk and fill in struct resource */
+int platform_resource_setup_memory(struct platform_device *pdev,
+				   char *name, unsigned long memsize);
+
diff --git a/include/asm-sh/div64.h b/arch/sh/include/asm/div64.h
index 6cd978cefb28..6cd978cefb28 100644
--- a/include/asm-sh/div64.h
+++ b/arch/sh/include/asm/div64.h
diff --git a/arch/sh/include/asm/dma-mapping.h b/arch/sh/include/asm/dma-mapping.h
new file mode 100644
index 000000000000..627315ecdb52
--- /dev/null
+++ b/arch/sh/include/asm/dma-mapping.h
@@ -0,0 +1,193 @@
+#ifndef __ASM_SH_DMA_MAPPING_H
+#define __ASM_SH_DMA_MAPPING_H
+
+#include <linux/mm.h>
+#include <linux/scatterlist.h>
+#include <asm/cacheflush.h>
+#include <asm/io.h>
+#include <asm-generic/dma-coherent.h>
+
+extern struct bus_type pci_bus_type;
+
+#define dma_supported(dev, mask)	(1)
+
+static inline int dma_set_mask(struct device *dev, u64 mask)
+{
+	if (!dev->dma_mask || !dma_supported(dev, mask))
+		return -EIO;
+
+	*dev->dma_mask = mask;
+
+	return 0;
+}
+
+void *dma_alloc_coherent(struct device *dev, size_t size,
+			 dma_addr_t *dma_handle, gfp_t flag);
+
+void dma_free_coherent(struct device *dev, size_t size,
+		       void *vaddr, dma_addr_t dma_handle);
+
+void dma_cache_sync(struct device *dev, void *vaddr, size_t size,
+		    enum dma_data_direction dir);
+
+#define dma_alloc_noncoherent(d, s, h, f) dma_alloc_coherent(d, s, h, f)
+#define dma_free_noncoherent(d, s, v, h) dma_free_coherent(d, s, v, h)
+#define dma_is_consistent(d, h) (1)
+
+static inline dma_addr_t dma_map_single(struct device *dev,
+					void *ptr, size_t size,
+					enum dma_data_direction dir)
+{
+#if defined(CONFIG_PCI) && !defined(CONFIG_SH_PCIDMA_NONCOHERENT)
+	if (dev->bus == &pci_bus_type)
+		return virt_to_phys(ptr);
+#endif
+	dma_cache_sync(dev, ptr, size, dir);
+
+	return virt_to_phys(ptr);
+}
+
+#define dma_unmap_single(dev, addr, size, dir)	do { } while (0)
+
+static inline int dma_map_sg(struct device *dev, struct scatterlist *sg,
+			     int nents, enum dma_data_direction dir)
+{
+	int i;
+
+	for (i = 0; i < nents; i++) {
+#if !defined(CONFIG_PCI) || defined(CONFIG_SH_PCIDMA_NONCOHERENT)
+		dma_cache_sync(dev, sg_virt(&sg[i]), sg[i].length, dir);
+#endif
+		sg[i].dma_address = sg_phys(&sg[i]);
+	}
+
+	return nents;
+}
+
+#define dma_unmap_sg(dev, sg, nents, dir)	do { } while (0)
+
+static inline dma_addr_t dma_map_page(struct device *dev, struct page *page,
+				      unsigned long offset, size_t size,
+				      enum dma_data_direction dir)
+{
+	return dma_map_single(dev, page_address(page) + offset, size, dir);
+}
+
+static inline void dma_unmap_page(struct device *dev, dma_addr_t dma_address,
+				  size_t size, enum dma_data_direction dir)
+{
+	dma_unmap_single(dev, dma_address, size, dir);
+}
+
+static inline void dma_sync_single(struct device *dev, dma_addr_t dma_handle,
+				   size_t size, enum dma_data_direction dir)
+{
+#if defined(CONFIG_PCI) && !defined(CONFIG_SH_PCIDMA_NONCOHERENT)
+	if (dev->bus == &pci_bus_type)
+		return;
+#endif
+	dma_cache_sync(dev, phys_to_virt(dma_handle), size, dir);
+}
+
+static inline void dma_sync_single_range(struct device *dev,
+					 dma_addr_t dma_handle,
+					 unsigned long offset, size_t size,
+					 enum dma_data_direction dir)
+{
+#if defined(CONFIG_PCI) && !defined(CONFIG_SH_PCIDMA_NONCOHERENT)
+	if (dev->bus == &pci_bus_type)
+		return;
+#endif
+	dma_cache_sync(dev, phys_to_virt(dma_handle) + offset, size, dir);
+}
+
+static inline void dma_sync_sg(struct device *dev, struct scatterlist *sg,
+			       int nelems, enum dma_data_direction dir)
+{
+	int i;
+
+	for (i = 0; i < nelems; i++) {
+#if !defined(CONFIG_PCI) || defined(CONFIG_SH_PCIDMA_NONCOHERENT)
+		dma_cache_sync(dev, sg_virt(&sg[i]), sg[i].length, dir);
+#endif
+		sg[i].dma_address = sg_phys(&sg[i]);
+	}
+}
+
+static inline void dma_sync_single_for_cpu(struct device *dev,
+					   dma_addr_t dma_handle, size_t size,
+					   enum dma_data_direction dir)
+{
+	dma_sync_single(dev, dma_handle, size, dir);
+}
+
+static inline void dma_sync_single_for_device(struct device *dev,
+					      dma_addr_t dma_handle,
+					      size_t size,
+					      enum dma_data_direction dir)
+{
+	dma_sync_single(dev, dma_handle, size, dir);
+}
+
+static inline void dma_sync_single_range_for_cpu(struct device *dev,
+						 dma_addr_t dma_handle,
+						 unsigned long offset,
+						 size_t size,
+						 enum dma_data_direction direction)
+{
+	dma_sync_single_for_cpu(dev, dma_handle+offset, size, direction);
+}
+
+static inline void dma_sync_single_range_for_device(struct device *dev,
+						    dma_addr_t dma_handle,
+						    unsigned long offset,
+						    size_t size,
+						    enum dma_data_direction direction)
+{
+	dma_sync_single_for_device(dev, dma_handle+offset, size, direction);
+}
+
+
+static inline void dma_sync_sg_for_cpu(struct device *dev,
+				       struct scatterlist *sg, int nelems,
+				       enum dma_data_direction dir)
+{
+	dma_sync_sg(dev, sg, nelems, dir);
+}
+
+static inline void dma_sync_sg_for_device(struct device *dev,
+					  struct scatterlist *sg, int nelems,
+					  enum dma_data_direction dir)
+{
+	dma_sync_sg(dev, sg, nelems, dir);
+}
+
+
+static inline int dma_get_cache_alignment(void)
+{
+	/*
+	 * Each processor family will define its own L1_CACHE_SHIFT,
+	 * L1_CACHE_BYTES wraps to this, so this is always safe.
+	 */
+	return L1_CACHE_BYTES;
+}
+
+static inline int dma_mapping_error(struct device *dev, dma_addr_t dma_addr)
+{
+	return dma_addr == 0;
+}
+
+#define ARCH_HAS_DMA_DECLARE_COHERENT_MEMORY
+
+extern int
+dma_declare_coherent_memory(struct device *dev, dma_addr_t bus_addr,
+			    dma_addr_t device_addr, size_t size, int flags);
+
+extern void
+dma_release_declared_memory(struct device *dev);
+
+extern void *
+dma_mark_declared_memory_occupied(struct device *dev,
+				  dma_addr_t device_addr, size_t size);
+
+#endif /* __ASM_SH_DMA_MAPPING_H */
diff --git a/arch/sh/include/asm/dma.h b/arch/sh/include/asm/dma.h
new file mode 100644
index 000000000000..beca7128e2ab
--- /dev/null
+++ b/arch/sh/include/asm/dma.h
@@ -0,0 +1,166 @@
+/*
+ * include/asm-sh/dma.h
+ *
+ * Copyright (C) 2003, 2004  Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#ifndef __ASM_SH_DMA_H
+#define __ASM_SH_DMA_H
+#ifdef __KERNEL__
+
+#include <linux/spinlock.h>
+#include <linux/wait.h>
+#include <linux/sched.h>
+#include <linux/sysdev.h>
+#include <cpu/dma.h>
+
+/* The maximum address that we can perform a DMA transfer to on this platform */
+/* Don't define MAX_DMA_ADDRESS; it's useless on the SuperH and any
+   occurrence should be flagged as an error.  */
+/* But... */
+/* XXX: This is not applicable to SuperH, just needed for alloc_bootmem */
+#define MAX_DMA_ADDRESS		(PAGE_OFFSET+0x10000000)
+
+#ifdef CONFIG_NR_DMA_CHANNELS
+#  define MAX_DMA_CHANNELS	(CONFIG_NR_DMA_CHANNELS)
+#else
+#  define MAX_DMA_CHANNELS	(CONFIG_NR_ONCHIP_DMA_CHANNELS)
+#endif
+
+/*
+ * Read and write modes can mean drastically different things depending on the
+ * channel configuration. Consult your DMAC documentation and module
+ * implementation for further clues.
+ */
+#define DMA_MODE_READ		0x00
+#define DMA_MODE_WRITE		0x01
+#define DMA_MODE_MASK		0x01
+
+#define DMA_AUTOINIT		0x10
+
+/*
+ * DMAC (dma_info) flags
+ */
+enum {
+	DMAC_CHANNELS_CONFIGURED	= 0x01,
+	DMAC_CHANNELS_TEI_CAPABLE	= 0x02,	/* Transfer end interrupt */
+};
+
+/*
+ * DMA channel capabilities / flags
+ */
+enum {
+	DMA_CONFIGURED			= 0x01,
+
+	/*
+	 * Transfer end interrupt, inherited from DMAC.
+	 * wait_queue used in dma_wait_for_completion.
+	 */
+	DMA_TEI_CAPABLE			= 0x02,
+};
+
+extern spinlock_t dma_spin_lock;
+
+struct dma_channel;
+
+struct dma_ops {
+	int (*request)(struct dma_channel *chan);
+	void (*free)(struct dma_channel *chan);
+
+	int (*get_residue)(struct dma_channel *chan);
+	int (*xfer)(struct dma_channel *chan);
+	int (*configure)(struct dma_channel *chan, unsigned long flags);
+	int (*extend)(struct dma_channel *chan, unsigned long op, void *param);
+};
+
+struct dma_channel {
+	char dev_id[16];		/* unique name per DMAC of channel */
+
+	unsigned int chan;		/* DMAC channel number */
+	unsigned int vchan;		/* Virtual channel number */
+
+	unsigned int mode;
+	unsigned int count;
+
+	unsigned long sar;
+	unsigned long dar;
+
+	const char **caps;
+
+	unsigned long flags;
+	atomic_t busy;
+
+	wait_queue_head_t wait_queue;
+
+	struct sys_device dev;
+	void *priv_data;
+};
+
+struct dma_info {
+	struct platform_device *pdev;
+
+	const char *name;
+	unsigned int nr_channels;
+	unsigned long flags;
+
+	struct dma_ops *ops;
+	struct dma_channel *channels;
+
+	struct list_head list;
+	int first_channel_nr;
+	int first_vchannel_nr;
+};
+
+struct dma_chan_caps {
+	int ch_num;
+	const char **caplist;
+};
+
+#define to_dma_channel(channel) container_of(channel, struct dma_channel, dev)
+
+/* arch/sh/drivers/dma/dma-api.c */
+extern int dma_xfer(unsigned int chan, unsigned long from,
+		    unsigned long to, size_t size, unsigned int mode);
+
+#define dma_write(chan, from, to, size)	\
+	dma_xfer(chan, from, to, size, DMA_MODE_WRITE)
+#define dma_write_page(chan, from, to)	\
+	dma_write(chan, from, to, PAGE_SIZE)
+
+#define dma_read(chan, from, to, size)	\
+	dma_xfer(chan, from, to, size, DMA_MODE_READ)
+#define dma_read_page(chan, from, to)	\
+	dma_read(chan, from, to, PAGE_SIZE)
+
+extern int request_dma_bycap(const char **dmac, const char **caps,
+			     const char *dev_id);
+extern int request_dma(unsigned int chan, const char *dev_id);
+extern void free_dma(unsigned int chan);
+extern int get_dma_residue(unsigned int chan);
+extern struct dma_info *get_dma_info(unsigned int chan);
+extern struct dma_channel *get_dma_channel(unsigned int chan);
+extern void dma_wait_for_completion(unsigned int chan);
+extern void dma_configure_channel(unsigned int chan, unsigned long flags);
+
+extern int register_dmac(struct dma_info *info);
+extern void unregister_dmac(struct dma_info *info);
+extern struct dma_info *get_dma_info_by_name(const char *dmac_name);
+
+extern int dma_extend(unsigned int chan, unsigned long op, void *param);
+extern int register_chan_caps(const char *dmac, struct dma_chan_caps *capslist);
+
+/* arch/sh/drivers/dma/dma-sysfs.c */
+extern int dma_create_sysfs_files(struct dma_channel *, struct dma_info *);
+extern void dma_remove_sysfs_files(struct dma_channel *, struct dma_info *);
+
+#ifdef CONFIG_PCI
+extern int isa_dma_bridge_buggy;
+#else
+#define isa_dma_bridge_buggy	(0)
+#endif
+
+#endif /* __KERNEL__ */
+#endif /* __ASM_SH_DMA_H */
diff --git a/include/asm-sh/dmabrg.h b/arch/sh/include/asm/dmabrg.h
index c5edba216cf1..c5edba216cf1 100644
--- a/include/asm-sh/dmabrg.h
+++ b/arch/sh/include/asm/dmabrg.h
diff --git a/include/asm-sh/edosk7705.h b/arch/sh/include/asm/edosk7705.h
index 5bdc9d9be3de..5bdc9d9be3de 100644
--- a/include/asm-sh/edosk7705.h
+++ b/arch/sh/include/asm/edosk7705.h
diff --git a/arch/sh/include/asm/elf.h b/arch/sh/include/asm/elf.h
new file mode 100644
index 000000000000..f01449a8d378
--- /dev/null
+++ b/arch/sh/include/asm/elf.h
@@ -0,0 +1,244 @@
+#ifndef __ASM_SH_ELF_H
+#define __ASM_SH_ELF_H
+
+#include <linux/utsname.h>
+#include <asm/auxvec.h>
+#include <asm/ptrace.h>
+#include <asm/user.h>
+
+/* ELF header e_flags defines */
+#define EF_SH_PIC		0x100	/* -fpic */
+#define EF_SH_FDPIC		0x8000	/* -mfdpic */
+
+/* SH (particularly SHcompact) relocation types  */
+#define	R_SH_NONE		0
+#define	R_SH_DIR32		1
+#define	R_SH_REL32		2
+#define	R_SH_DIR8WPN		3
+#define	R_SH_IND12W		4
+#define	R_SH_DIR8WPL		5
+#define	R_SH_DIR8WPZ		6
+#define	R_SH_DIR8BP		7
+#define	R_SH_DIR8W		8
+#define	R_SH_DIR8L		9
+#define	R_SH_SWITCH16		25
+#define	R_SH_SWITCH32		26
+#define	R_SH_USES		27
+#define	R_SH_COUNT		28
+#define	R_SH_ALIGN		29
+#define	R_SH_CODE		30
+#define	R_SH_DATA		31
+#define	R_SH_LABEL		32
+#define	R_SH_SWITCH8		33
+#define	R_SH_GNU_VTINHERIT	34
+#define	R_SH_GNU_VTENTRY	35
+#define	R_SH_TLS_GD_32		144
+#define	R_SH_TLS_LD_32		145
+#define	R_SH_TLS_LDO_32		146
+#define	R_SH_TLS_IE_32		147
+#define	R_SH_TLS_LE_32		148
+#define	R_SH_TLS_DTPMOD32	149
+#define	R_SH_TLS_DTPOFF32	150
+#define	R_SH_TLS_TPOFF32	151
+#define	R_SH_GOT32		160
+#define	R_SH_PLT32		161
+#define	R_SH_COPY		162
+#define	R_SH_GLOB_DAT		163
+#define	R_SH_JMP_SLOT		164
+#define	R_SH_RELATIVE		165
+#define	R_SH_GOTOFF		166
+#define	R_SH_GOTPC		167
+
+/* FDPIC relocs */
+#define R_SH_GOT20		70
+#define R_SH_GOTOFF20		71
+#define R_SH_GOTFUNCDESC	72
+#define R_SH_GOTFUNCDESC20	73
+#define R_SH_GOTOFFFUNCDESC	74
+#define R_SH_GOTOFFFUNCDESC20	75
+#define R_SH_FUNCDESC		76
+#define R_SH_FUNCDESC_VALUE	77
+
+#if 0 /* XXX - later .. */
+#define R_SH_GOT20		198
+#define R_SH_GOTOFF20		199
+#define R_SH_GOTFUNCDESC	200
+#define R_SH_GOTFUNCDESC20	201
+#define R_SH_GOTOFFFUNCDESC	202
+#define R_SH_GOTOFFFUNCDESC20	203
+#define R_SH_FUNCDESC		204
+#define R_SH_FUNCDESC_VALUE	205
+#endif
+
+/* SHmedia relocs */
+#define R_SH_IMM_LOW16		246
+#define R_SH_IMM_LOW16_PCREL	247
+#define R_SH_IMM_MEDLOW16	248
+#define R_SH_IMM_MEDLOW16_PCREL	249
+/* Keep this the last entry.  */
+#define	R_SH_NUM		256
+
+/*
+ * ELF register definitions..
+ */
+
+typedef unsigned long elf_greg_t;
+
+#define ELF_NGREG (sizeof (struct pt_regs) / sizeof(elf_greg_t))
+typedef elf_greg_t elf_gregset_t[ELF_NGREG];
+
+typedef struct user_fpu_struct elf_fpregset_t;
+
+/*
+ * These are used to set parameters in the core dumps.
+ */
+#define ELF_CLASS	ELFCLASS32
+#ifdef __LITTLE_ENDIAN__
+#define ELF_DATA	ELFDATA2LSB
+#else
+#define ELF_DATA	ELFDATA2MSB
+#endif
+#define ELF_ARCH	EM_SH
+
+#ifdef __KERNEL__
+/*
+ * This is used to ensure we don't load something for the wrong architecture.
+ */
+#define elf_check_arch(x)		((x)->e_machine == EM_SH)
+#define elf_check_fdpic(x)		((x)->e_flags & EF_SH_FDPIC)
+#define elf_check_const_displacement(x)	((x)->e_flags & EF_SH_PIC)
+
+#define USE_ELF_CORE_DUMP
+#define ELF_FDPIC_CORE_EFLAGS	EF_SH_FDPIC
+#define ELF_EXEC_PAGESIZE	PAGE_SIZE
+
+/* This is the location that an ET_DYN program is loaded if exec'ed.  Typical
+   use of this is to invoke "./ld.so someprog" to test out a new version of
+   the loader.  We need to make sure that it is out of the way of the program
+   that it will "exec", and that there is sufficient room for the brk.  */
+
+#define ELF_ET_DYN_BASE         (2 * TASK_SIZE / 3)
+
+#define ELF_CORE_COPY_REGS(_dest,_regs)				\
+	memcpy((char *) &_dest, (char *) _regs,			\
+	       sizeof(struct pt_regs));
+
+/* This yields a mask that user programs can use to figure out what
+   instruction set this CPU supports.  This could be done in user space,
+   but it's not easy, and we've already done it here.  */
+
+#define ELF_HWCAP	(boot_cpu_data.flags)
+
+/* This yields a string that ld.so will use to load implementation
+   specific libraries for optimization.  This is more specific in
+   intent than poking at uname or /proc/cpuinfo.
+
+   For the moment, we have only optimizations for the Intel generations,
+   but that could change... */
+
+#define ELF_PLATFORM	(utsname()->machine)
+
+#ifdef __SH5__
+#define ELF_PLAT_INIT(_r, load_addr) \
+  do { _r->regs[0]=0; _r->regs[1]=0; _r->regs[2]=0; _r->regs[3]=0; \
+       _r->regs[4]=0; _r->regs[5]=0; _r->regs[6]=0; _r->regs[7]=0; \
+       _r->regs[8]=0; _r->regs[9]=0; _r->regs[10]=0; _r->regs[11]=0; \
+       _r->regs[12]=0; _r->regs[13]=0; _r->regs[14]=0; _r->regs[15]=0; \
+       _r->regs[16]=0; _r->regs[17]=0; _r->regs[18]=0; _r->regs[19]=0; \
+       _r->regs[20]=0; _r->regs[21]=0; _r->regs[22]=0; _r->regs[23]=0; \
+       _r->regs[24]=0; _r->regs[25]=0; _r->regs[26]=0; _r->regs[27]=0; \
+       _r->regs[28]=0; _r->regs[29]=0; _r->regs[30]=0; _r->regs[31]=0; \
+       _r->regs[32]=0; _r->regs[33]=0; _r->regs[34]=0; _r->regs[35]=0; \
+       _r->regs[36]=0; _r->regs[37]=0; _r->regs[38]=0; _r->regs[39]=0; \
+       _r->regs[40]=0; _r->regs[41]=0; _r->regs[42]=0; _r->regs[43]=0; \
+       _r->regs[44]=0; _r->regs[45]=0; _r->regs[46]=0; _r->regs[47]=0; \
+       _r->regs[48]=0; _r->regs[49]=0; _r->regs[50]=0; _r->regs[51]=0; \
+       _r->regs[52]=0; _r->regs[53]=0; _r->regs[54]=0; _r->regs[55]=0; \
+       _r->regs[56]=0; _r->regs[57]=0; _r->regs[58]=0; _r->regs[59]=0; \
+       _r->regs[60]=0; _r->regs[61]=0; _r->regs[62]=0; \
+       _r->tregs[0]=0; _r->tregs[1]=0; _r->tregs[2]=0; _r->tregs[3]=0; \
+       _r->tregs[4]=0; _r->tregs[5]=0; _r->tregs[6]=0; _r->tregs[7]=0; \
+       _r->sr = SR_FD | SR_MMU; } while (0)
+#else
+#define ELF_PLAT_INIT(_r, load_addr) \
+  do { _r->regs[0]=0; _r->regs[1]=0; _r->regs[2]=0; _r->regs[3]=0; \
+       _r->regs[4]=0; _r->regs[5]=0; _r->regs[6]=0; _r->regs[7]=0; \
+       _r->regs[8]=0; _r->regs[9]=0; _r->regs[10]=0; _r->regs[11]=0; \
+       _r->regs[12]=0; _r->regs[13]=0; _r->regs[14]=0; \
+       _r->sr = SR_FD; } while (0)
+
+#define ELF_FDPIC_PLAT_INIT(_r, _exec_map_addr, _interp_map_addr,	\
+			    _dynamic_addr)				\
+do {									\
+	_r->regs[0]	= 0;						\
+	_r->regs[1]	= 0;						\
+	_r->regs[2]	= 0;						\
+	_r->regs[3]	= 0;						\
+	_r->regs[4]	= 0;						\
+	_r->regs[5]	= 0;						\
+	_r->regs[6]	= 0;						\
+	_r->regs[7]	= 0;						\
+	_r->regs[8]	= _exec_map_addr;				\
+	_r->regs[9]	= _interp_map_addr;				\
+	_r->regs[10]	= _dynamic_addr;				\
+	_r->regs[11]	= 0;						\
+	_r->regs[12]	= 0;						\
+	_r->regs[13]	= 0;						\
+	_r->regs[14]	= 0;						\
+	_r->sr		= SR_FD;					\
+} while (0)
+#endif
+
+#define SET_PERSONALITY(ex, ibcs2) set_personality(PER_LINUX_32BIT)
+struct task_struct;
+extern int dump_task_regs (struct task_struct *, elf_gregset_t *);
+extern int dump_task_fpu (struct task_struct *, elf_fpregset_t *);
+
+#define ELF_CORE_COPY_TASK_REGS(tsk, elf_regs) dump_task_regs(tsk, elf_regs)
+#define ELF_CORE_COPY_FPREGS(tsk, elf_fpregs) dump_task_fpu(tsk, elf_fpregs)
+
+#ifdef CONFIG_VSYSCALL
+/* vDSO has arch_setup_additional_pages */
+#define ARCH_HAS_SETUP_ADDITIONAL_PAGES
+struct linux_binprm;
+extern int arch_setup_additional_pages(struct linux_binprm *bprm,
+				       int executable_stack);
+
+extern unsigned int vdso_enabled;
+extern void __kernel_vsyscall;
+
+#define VDSO_BASE		((unsigned long)current->mm->context.vdso)
+#define VDSO_SYM(x)		(VDSO_BASE + (unsigned long)(x))
+
+#define VSYSCALL_AUX_ENT					\
+	if (vdso_enabled)					\
+		NEW_AUX_ENT(AT_SYSINFO_EHDR, VDSO_BASE);
+#else
+#define VSYSCALL_AUX_ENT
+#endif /* CONFIG_VSYSCALL */
+
+#ifdef CONFIG_SH_FPU
+#define FPU_AUX_ENT	NEW_AUX_ENT(AT_FPUCW, FPSCR_INIT)
+#else
+#define FPU_AUX_ENT
+#endif
+
+extern int l1i_cache_shape, l1d_cache_shape, l2_cache_shape;
+
+/* update AT_VECTOR_SIZE_ARCH if the number of NEW_AUX_ENT entries changes */
+#define ARCH_DLINFO						\
+do {								\
+	/* Optional FPU initialization */			\
+	FPU_AUX_ENT;						\
+								\
+	/* Optional vsyscall entry */				\
+	VSYSCALL_AUX_ENT;					\
+								\
+	/* Cache desc */					\
+	NEW_AUX_ENT(AT_L1I_CACHESHAPE, l1i_cache_shape);	\
+	NEW_AUX_ENT(AT_L1D_CACHESHAPE, l1d_cache_shape);	\
+	NEW_AUX_ENT(AT_L2_CACHESHAPE, l2_cache_shape);		\
+} while (0)
+
+#endif /* __KERNEL__ */
+#endif /* __ASM_SH_ELF_H */
diff --git a/include/asm-sh/emergency-restart.h b/arch/sh/include/asm/emergency-restart.h
index 108d8c48e42e..108d8c48e42e 100644
--- a/include/asm-sh/emergency-restart.h
+++ b/arch/sh/include/asm/emergency-restart.h
diff --git a/include/asm-sh/entry-macros.S b/arch/sh/include/asm/entry-macros.S
index 2dab0b8d9454..2dab0b8d9454 100644
--- a/include/asm-sh/entry-macros.S
+++ b/arch/sh/include/asm/entry-macros.S
diff --git a/include/asm-sh/errno.h b/arch/sh/include/asm/errno.h
index 51cf6f9cebb8..51cf6f9cebb8 100644
--- a/include/asm-sh/errno.h
+++ b/arch/sh/include/asm/errno.h
diff --git a/include/asm-sh/fb.h b/arch/sh/include/asm/fb.h
index d92e99cd8c8a..d92e99cd8c8a 100644
--- a/include/asm-sh/fb.h
+++ b/arch/sh/include/asm/fb.h
diff --git a/include/asm-sh/fcntl.h b/arch/sh/include/asm/fcntl.h
index 46ab12db5739..46ab12db5739 100644
--- a/include/asm-sh/fcntl.h
+++ b/arch/sh/include/asm/fcntl.h
diff --git a/include/asm-sh/fixmap.h b/arch/sh/include/asm/fixmap.h
index 721fcc4d5e98..721fcc4d5e98 100644
--- a/include/asm-sh/fixmap.h
+++ b/arch/sh/include/asm/fixmap.h
diff --git a/arch/sh/include/asm/flat.h b/arch/sh/include/asm/flat.h
new file mode 100644
index 000000000000..d3b2b4f109e3
--- /dev/null
+++ b/arch/sh/include/asm/flat.h
@@ -0,0 +1,31 @@
+/*
+ * include/asm-sh/flat.h
+ *
+ * uClinux flat-format executables
+ *
+ * Copyright (C) 2003  Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive for
+ * more details.
+ */
+#ifndef __ASM_SH_FLAT_H
+#define __ASM_SH_FLAT_H
+
+#define	flat_stack_align(sp)			/* nothing needed */
+#define	flat_argvp_envp_on_stack()		0
+#define	flat_old_ram_flag(flags)		(flags)
+#define	flat_reloc_valid(reloc, size)		((reloc) <= (size))
+#define	flat_get_addr_from_rp(rp, relval, flags, p)	get_unaligned(rp)
+#define	flat_put_addr_at_rp(rp, val, relval)	put_unaligned(val,rp)
+#define	flat_get_relocate_addr(rel)		(rel)
+#define	flat_set_persistent(relval, p)		({ (void)p; 0; })
+
+#define FLAT_PLAT_INIT(_r) \
+  do { _r->regs[0]=0; _r->regs[1]=0; _r->regs[2]=0; _r->regs[3]=0; \
+       _r->regs[4]=0; _r->regs[5]=0; _r->regs[6]=0; _r->regs[7]=0; \
+       _r->regs[8]=0; _r->regs[9]=0; _r->regs[10]=0; _r->regs[11]=0; \
+       _r->regs[12]=0; _r->regs[13]=0; _r->regs[14]=0; \
+       _r->sr = SR_FD; } while (0)
+
+#endif /* __ASM_SH_FLAT_H */
diff --git a/include/asm-sh/fpu.h b/arch/sh/include/asm/fpu.h
index 91462fea1507..91462fea1507 100644
--- a/include/asm-sh/fpu.h
+++ b/arch/sh/include/asm/fpu.h
diff --git a/arch/sh/include/asm/freq.h b/arch/sh/include/asm/freq.h
new file mode 100644
index 000000000000..4ece90b09b9c
--- /dev/null
+++ b/arch/sh/include/asm/freq.h
@@ -0,0 +1,18 @@
+/*
+ * include/asm-sh/freq.h
+ *
+ * Copyright (C) 2002, 2003 Paul Mundt
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+#ifndef __ASM_SH_FREQ_H
+#define __ASM_SH_FREQ_H
+#ifdef __KERNEL__
+
+#include <cpu/freq.h>
+
+#endif /* __KERNEL__ */
+#endif /* __ASM_SH_FREQ_H */
diff --git a/include/asm-sh/futex-irq.h b/arch/sh/include/asm/futex-irq.h
index a9f16a7f9aea..a9f16a7f9aea 100644
--- a/include/asm-sh/futex-irq.h
+++ b/arch/sh/include/asm/futex-irq.h
diff --git a/include/asm-sh/futex.h b/arch/sh/include/asm/futex.h
index 68256ec5fa35..68256ec5fa35 100644
--- a/include/asm-sh/futex.h
+++ b/arch/sh/include/asm/futex.h
diff --git a/arch/sh/include/asm/gpio.h b/arch/sh/include/asm/gpio.h
new file mode 100644
index 000000000000..cf32bd2df881
--- /dev/null
+++ b/arch/sh/include/asm/gpio.h
@@ -0,0 +1,19 @@
+/*
+ *  include/asm-sh/gpio.h
+ *
+ *  Copyright (C) 2007 Markus Brunner, Mark Jonas
+ *
+ *  Addresses for the Pin Function Controller
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#ifndef __ASM_SH_GPIO_H
+#define __ASM_SH_GPIO_H
+
+#if defined(CONFIG_CPU_SH3)
+#include <cpu/gpio.h>
+#endif
+
+#endif /* __ASM_SH_GPIO_H */
diff --git a/include/asm-sh/hardirq.h b/arch/sh/include/asm/hardirq.h
index 715ee237fc77..715ee237fc77 100644
--- a/include/asm-sh/hardirq.h
+++ b/arch/sh/include/asm/hardirq.h
diff --git a/include/asm-sh/hd64461.h b/arch/sh/include/asm/hd64461.h
index 8c1353baf00f..8c1353baf00f 100644
--- a/include/asm-sh/hd64461.h
+++ b/arch/sh/include/asm/hd64461.h
diff --git a/include/asm-sh/hd64465/gpio.h b/arch/sh/include/asm/hd64465/gpio.h
index a3cdca2713dd..a3cdca2713dd 100644
--- a/include/asm-sh/hd64465/gpio.h
+++ b/arch/sh/include/asm/hd64465/gpio.h
diff --git a/include/asm-sh/hd64465/hd64465.h b/arch/sh/include/asm/hd64465/hd64465.h
index cfd0e803d2a2..cfd0e803d2a2 100644
--- a/include/asm-sh/hd64465/hd64465.h
+++ b/arch/sh/include/asm/hd64465/hd64465.h
diff --git a/include/asm-sh/hd64465/io.h b/arch/sh/include/asm/hd64465/io.h
index 139f1472e5bb..139f1472e5bb 100644
--- a/include/asm-sh/hd64465/io.h
+++ b/arch/sh/include/asm/hd64465/io.h
diff --git a/include/asm-sh/heartbeat.h b/arch/sh/include/asm/heartbeat.h
index 724a43ed245e..724a43ed245e 100644
--- a/include/asm-sh/heartbeat.h
+++ b/arch/sh/include/asm/heartbeat.h
diff --git a/include/asm-sh/hp6xx.h b/arch/sh/include/asm/hp6xx.h
index 0d4165a32dcd..0d4165a32dcd 100644
--- a/include/asm-sh/hp6xx.h
+++ b/arch/sh/include/asm/hp6xx.h
diff --git a/include/asm-sh/hugetlb.h b/arch/sh/include/asm/hugetlb.h
index 967068fb79ac..967068fb79ac 100644
--- a/include/asm-sh/hugetlb.h
+++ b/arch/sh/include/asm/hugetlb.h
diff --git a/arch/sh/include/asm/hw_irq.h b/arch/sh/include/asm/hw_irq.h
new file mode 100644
index 000000000000..d557b00111bf
--- /dev/null
+++ b/arch/sh/include/asm/hw_irq.h
@@ -0,0 +1,123 @@
+#ifndef __ASM_SH_HW_IRQ_H
+#define __ASM_SH_HW_IRQ_H
+
+#include <linux/init.h>
+#include <asm/atomic.h>
+
+extern atomic_t irq_err_count;
+
+struct ipr_data {
+	unsigned char irq;
+	unsigned char ipr_idx;		/* Index for the IPR registered */
+	unsigned char shift;		/* Number of bits to shift the data */
+	unsigned char priority;		/* The priority */
+};
+
+struct ipr_desc {
+	unsigned long *ipr_offsets;
+	unsigned int nr_offsets;
+	struct ipr_data *ipr_data;
+	unsigned int nr_irqs;
+	struct irq_chip chip;
+};
+
+void register_ipr_controller(struct ipr_desc *);
+
+typedef unsigned char intc_enum;
+
+struct intc_vect {
+	intc_enum enum_id;
+	unsigned short vect;
+};
+
+#define INTC_VECT(enum_id, vect) { enum_id, vect }
+#define INTC_IRQ(enum_id, irq) INTC_VECT(enum_id, irq2evt(irq))
+
+struct intc_group {
+	intc_enum enum_id;
+	intc_enum enum_ids[32];
+};
+
+#define INTC_GROUP(enum_id, ids...) { enum_id, { ids } }
+
+struct intc_mask_reg {
+	unsigned long set_reg, clr_reg, reg_width;
+	intc_enum enum_ids[32];
+#ifdef CONFIG_SMP
+	unsigned long smp;
+#endif
+};
+
+struct intc_prio_reg {
+	unsigned long set_reg, clr_reg, reg_width, field_width;
+	intc_enum enum_ids[16];
+#ifdef CONFIG_SMP
+	unsigned long smp;
+#endif
+};
+
+struct intc_sense_reg {
+	unsigned long reg, reg_width, field_width;
+	intc_enum enum_ids[16];
+};
+
+#ifdef CONFIG_SMP
+#define INTC_SMP(stride, nr) .smp = (stride) | ((nr) << 8)
+#else
+#define INTC_SMP(stride, nr)
+#endif
+
+struct intc_desc {
+	struct intc_vect *vectors;
+	unsigned int nr_vectors;
+	struct intc_group *groups;
+	unsigned int nr_groups;
+	struct intc_mask_reg *mask_regs;
+	unsigned int nr_mask_regs;
+	struct intc_prio_reg *prio_regs;
+	unsigned int nr_prio_regs;
+	struct intc_sense_reg *sense_regs;
+	unsigned int nr_sense_regs;
+	char *name;
+#if defined(CONFIG_CPU_SH3) || defined(CONFIG_CPU_SH4A)
+	struct intc_mask_reg *ack_regs;
+	unsigned int nr_ack_regs;
+#endif
+};
+
+#define _INTC_ARRAY(a) a, sizeof(a)/sizeof(*a)
+#define DECLARE_INTC_DESC(symbol, chipname, vectors, groups,		\
+	mask_regs, prio_regs, sense_regs)				\
+struct intc_desc symbol __initdata = {					\
+	_INTC_ARRAY(vectors), _INTC_ARRAY(groups),			\
+	_INTC_ARRAY(mask_regs), _INTC_ARRAY(prio_regs),			\
+	_INTC_ARRAY(sense_regs),					\
+	chipname,							\
+}
+
+#if defined(CONFIG_CPU_SH3) || defined(CONFIG_CPU_SH4A)
+#define DECLARE_INTC_DESC_ACK(symbol, chipname, vectors, groups,	\
+	mask_regs, prio_regs, sense_regs, ack_regs)			\
+struct intc_desc symbol __initdata = {					\
+	_INTC_ARRAY(vectors), _INTC_ARRAY(groups),			\
+	_INTC_ARRAY(mask_regs), _INTC_ARRAY(prio_regs),			\
+	_INTC_ARRAY(sense_regs),					\
+	chipname,							\
+	_INTC_ARRAY(ack_regs),						\
+}
+#endif
+
+void __init register_intc_controller(struct intc_desc *desc);
+int intc_set_priority(unsigned int irq, unsigned int prio);
+
+void __init plat_irq_setup(void);
+#ifdef CONFIG_CPU_SH3
+void __init plat_irq_setup_sh3(void);
+#endif
+
+enum { IRQ_MODE_IRQ, IRQ_MODE_IRQ7654, IRQ_MODE_IRQ3210,
+       IRQ_MODE_IRL7654_MASK, IRQ_MODE_IRL3210_MASK,
+       IRQ_MODE_IRL7654, IRQ_MODE_IRL3210 };
+void __init plat_irq_setup_pins(int mode);
+
+#endif /* __ASM_SH_HW_IRQ_H */
diff --git a/include/asm-sh/i2c-sh7760.h b/arch/sh/include/asm/i2c-sh7760.h
index 24182116711f..24182116711f 100644
--- a/include/asm-sh/i2c-sh7760.h
+++ b/arch/sh/include/asm/i2c-sh7760.h
diff --git a/include/asm-sh/ilsel.h b/arch/sh/include/asm/ilsel.h
index e3d304b280f6..e3d304b280f6 100644
--- a/include/asm-sh/ilsel.h
+++ b/arch/sh/include/asm/ilsel.h
diff --git a/include/asm-sh/io.h b/arch/sh/include/asm/io.h
index a4fbf0c84fb1..a4fbf0c84fb1 100644
--- a/include/asm-sh/io.h
+++ b/arch/sh/include/asm/io.h
diff --git a/include/asm-sh/io_generic.h b/arch/sh/include/asm/io_generic.h
index 92fc6070d7b3..92fc6070d7b3 100644
--- a/include/asm-sh/io_generic.h
+++ b/arch/sh/include/asm/io_generic.h
diff --git a/include/asm-sh/io_trapped.h b/arch/sh/include/asm/io_trapped.h
index f1251d4f0ba9..f1251d4f0ba9 100644
--- a/include/asm-sh/io_trapped.h
+++ b/arch/sh/include/asm/io_trapped.h
diff --git a/include/asm-sh/ioctl.h b/arch/sh/include/asm/ioctl.h
index b279fe06dfe5..b279fe06dfe5 100644
--- a/include/asm-sh/ioctl.h
+++ b/arch/sh/include/asm/ioctl.h
diff --git a/include/asm-sh/ioctls.h b/arch/sh/include/asm/ioctls.h
index c212c371a4a5..c212c371a4a5 100644
--- a/include/asm-sh/ioctls.h
+++ b/arch/sh/include/asm/ioctls.h
diff --git a/include/asm-sh/ipcbuf.h b/arch/sh/include/asm/ipcbuf.h
index 5ffc9972a7ea..5ffc9972a7ea 100644
--- a/include/asm-sh/ipcbuf.h
+++ b/arch/sh/include/asm/ipcbuf.h
diff --git a/arch/sh/include/asm/irq.h b/arch/sh/include/asm/irq.h
new file mode 100644
index 000000000000..6195a531c1b0
--- /dev/null
+++ b/arch/sh/include/asm/irq.h
@@ -0,0 +1,57 @@
+#ifndef __ASM_SH_IRQ_H
+#define __ASM_SH_IRQ_H
+
+#include <asm/machvec.h>
+
+/*
+ * A sane default based on a reasonable vector table size, platforms are
+ * advised to cap this at the hard limit that they're interested in
+ * through the machvec.
+ */
+#define NR_IRQS 256
+
+/*
+ * Convert back and forth between INTEVT and IRQ values.
+ */
+#ifdef CONFIG_CPU_HAS_INTEVT
+#define evt2irq(evt)		(((evt) >> 5) - 16)
+#define irq2evt(irq)		(((irq) + 16) << 5)
+#else
+#define evt2irq(evt)		(evt)
+#define irq2evt(irq)		(irq)
+#endif
+
+/*
+ * Simple Mask Register Support
+ */
+extern void make_maskreg_irq(unsigned int irq);
+extern unsigned short *irq_mask_register;
+
+/*
+ * PINT IRQs
+ */
+void init_IRQ_pint(void);
+void make_imask_irq(unsigned int irq);
+
+static inline int generic_irq_demux(int irq)
+{
+	return irq;
+}
+
+#define irq_canonicalize(irq)	(irq)
+#define irq_demux(irq)		sh_mv.mv_irq_demux(irq)
+
+#ifdef CONFIG_IRQSTACKS
+extern void irq_ctx_init(int cpu);
+extern void irq_ctx_exit(int cpu);
+# define __ARCH_HAS_DO_SOFTIRQ
+#else
+# define irq_ctx_init(cpu) do { } while (0)
+# define irq_ctx_exit(cpu) do { } while (0)
+#endif
+
+#ifdef CONFIG_CPU_SH5
+#include <cpu/irq.h>
+#endif
+
+#endif /* __ASM_SH_IRQ_H */
diff --git a/include/asm-sh/irq_regs.h b/arch/sh/include/asm/irq_regs.h
index 3dd9c0b70270..3dd9c0b70270 100644
--- a/include/asm-sh/irq_regs.h
+++ b/arch/sh/include/asm/irq_regs.h
diff --git a/include/asm-sh/irqflags.h b/arch/sh/include/asm/irqflags.h
index 46e71da5be6b..46e71da5be6b 100644
--- a/include/asm-sh/irqflags.h
+++ b/arch/sh/include/asm/irqflags.h
diff --git a/include/asm-sh/irqflags_32.h b/arch/sh/include/asm/irqflags_32.h
index 60218f541340..60218f541340 100644
--- a/include/asm-sh/irqflags_32.h
+++ b/arch/sh/include/asm/irqflags_32.h
diff --git a/arch/sh/include/asm/irqflags_64.h b/arch/sh/include/asm/irqflags_64.h
new file mode 100644
index 000000000000..88f65222c1d4
--- /dev/null
+++ b/arch/sh/include/asm/irqflags_64.h
@@ -0,0 +1,85 @@
+#ifndef __ASM_SH_IRQFLAGS_64_H
+#define __ASM_SH_IRQFLAGS_64_H
+
+#include <cpu/registers.h>
+
+#define SR_MASK_LL	0x00000000000000f0LL
+#define SR_BL_LL	0x0000000010000000LL
+
+static inline void raw_local_irq_enable(void)
+{
+	unsigned long long __dummy0, __dummy1 = ~SR_MASK_LL;
+
+	__asm__ __volatile__("getcon	" __SR ", %0\n\t"
+			     "and	%0, %1, %0\n\t"
+			     "putcon	%0, " __SR "\n\t"
+			     : "=&r" (__dummy0)
+			     : "r" (__dummy1));
+}
+
+static inline void raw_local_irq_disable(void)
+{
+	unsigned long long __dummy0, __dummy1 = SR_MASK_LL;
+
+	__asm__ __volatile__("getcon	" __SR ", %0\n\t"
+			     "or	%0, %1, %0\n\t"
+			     "putcon	%0, " __SR "\n\t"
+			     : "=&r" (__dummy0)
+			     : "r" (__dummy1));
+}
+
+static inline void set_bl_bit(void)
+{
+	unsigned long long __dummy0, __dummy1 = SR_BL_LL;
+
+	__asm__ __volatile__("getcon	" __SR ", %0\n\t"
+			     "or	%0, %1, %0\n\t"
+			     "putcon	%0, " __SR "\n\t"
+			     : "=&r" (__dummy0)
+			     : "r" (__dummy1));
+
+}
+
+static inline void clear_bl_bit(void)
+{
+	unsigned long long __dummy0, __dummy1 = ~SR_BL_LL;
+
+	__asm__ __volatile__("getcon	" __SR ", %0\n\t"
+			     "and	%0, %1, %0\n\t"
+			     "putcon	%0, " __SR "\n\t"
+			     : "=&r" (__dummy0)
+			     : "r" (__dummy1));
+}
+
+static inline unsigned long __raw_local_save_flags(void)
+{
+	unsigned long long __dummy = SR_MASK_LL;
+	unsigned long flags;
+
+	__asm__ __volatile__ (
+		"getcon	" __SR ", %0\n\t"
+		"and	%0, %1, %0"
+		: "=&r" (flags)
+		: "r" (__dummy));
+
+	return flags;
+}
+
+static inline unsigned long __raw_local_irq_save(void)
+{
+	unsigned long long __dummy0, __dummy1 = SR_MASK_LL;
+	unsigned long flags;
+
+	__asm__ __volatile__ (
+		"getcon	" __SR ", %1\n\t"
+		"or	%1, r63, %0\n\t"
+		"or	%1, %2, %1\n\t"
+		"putcon	%1, " __SR "\n\t"
+		"and	%0, %2, %0"
+		: "=&r" (flags), "=&r" (__dummy0)
+		: "r" (__dummy1));
+
+	return flags;
+}
+
+#endif /* __ASM_SH_IRQFLAGS_64_H */
diff --git a/include/asm-sh/kdebug.h b/arch/sh/include/asm/kdebug.h
index 49cd69051a88..49cd69051a88 100644
--- a/include/asm-sh/kdebug.h
+++ b/arch/sh/include/asm/kdebug.h
diff --git a/arch/sh/include/asm/kexec.h b/arch/sh/include/asm/kexec.h
new file mode 100644
index 000000000000..765a5e1660fc
--- /dev/null
+++ b/arch/sh/include/asm/kexec.h
@@ -0,0 +1,62 @@
+#ifndef __ASM_SH_KEXEC_H
+#define __ASM_SH_KEXEC_H
+
+#include <asm/ptrace.h>
+#include <asm/string.h>
+
+/*
+ * KEXEC_SOURCE_MEMORY_LIMIT maximum page get_free_page can return.
+ * I.e. Maximum page that is mapped directly into kernel memory,
+ * and kmap is not required.
+ *
+ * Someone correct me if FIXADDR_START - PAGEOFFSET is not the correct
+ * calculation for the amount of memory directly mappable into the
+ * kernel memory space.
+ */
+
+/* Maximum physical address we can use pages from */
+#define KEXEC_SOURCE_MEMORY_LIMIT (-1UL)
+/* Maximum address we can reach in physical address mode */
+#define KEXEC_DESTINATION_MEMORY_LIMIT (-1UL)
+/* Maximum address we can use for the control code buffer */
+#define KEXEC_CONTROL_MEMORY_LIMIT TASK_SIZE
+
+#define KEXEC_CONTROL_PAGE_SIZE	4096
+
+/* The native architecture */
+#define KEXEC_ARCH KEXEC_ARCH_SH
+
+static inline void crash_setup_regs(struct pt_regs *newregs,
+				    struct pt_regs *oldregs)
+{
+	if (oldregs)
+		memcpy(newregs, oldregs, sizeof(*newregs));
+	else {
+		__asm__ __volatile__ ("mov r0, %0" : "=r" (newregs->regs[0]));
+		__asm__ __volatile__ ("mov r1, %0" : "=r" (newregs->regs[1]));
+		__asm__ __volatile__ ("mov r2, %0" : "=r" (newregs->regs[2]));
+		__asm__ __volatile__ ("mov r3, %0" : "=r" (newregs->regs[3]));
+		__asm__ __volatile__ ("mov r4, %0" : "=r" (newregs->regs[4]));
+		__asm__ __volatile__ ("mov r5, %0" : "=r" (newregs->regs[5]));
+		__asm__ __volatile__ ("mov r6, %0" : "=r" (newregs->regs[6]));
+		__asm__ __volatile__ ("mov r7, %0" : "=r" (newregs->regs[7]));
+		__asm__ __volatile__ ("mov r8, %0" : "=r" (newregs->regs[8]));
+		__asm__ __volatile__ ("mov r9, %0" : "=r" (newregs->regs[9]));
+		__asm__ __volatile__ ("mov r10, %0" : "=r" (newregs->regs[10]));
+		__asm__ __volatile__ ("mov r11, %0" : "=r" (newregs->regs[11]));
+		__asm__ __volatile__ ("mov r12, %0" : "=r" (newregs->regs[12]));
+		__asm__ __volatile__ ("mov r13, %0" : "=r" (newregs->regs[13]));
+		__asm__ __volatile__ ("mov r14, %0" : "=r" (newregs->regs[14]));
+		__asm__ __volatile__ ("mov r15, %0" : "=r" (newregs->regs[15]));
+
+		__asm__ __volatile__ ("sts pr, %0" : "=r" (newregs->pr));
+		__asm__ __volatile__ ("sts macl, %0" : "=r" (newregs->macl));
+		__asm__ __volatile__ ("sts mach, %0" : "=r" (newregs->mach));
+
+		__asm__ __volatile__ ("stc gbr, %0" : "=r" (newregs->gbr));
+		__asm__ __volatile__ ("stc sr, %0" : "=r" (newregs->sr));
+
+		newregs->pc = (unsigned long)current_text_addr();
+	}
+}
+#endif /* __ASM_SH_KEXEC_H */
diff --git a/include/asm-sh/kgdb.h b/arch/sh/include/asm/kgdb.h
index 24e42078f36f..24e42078f36f 100644
--- a/include/asm-sh/kgdb.h
+++ b/arch/sh/include/asm/kgdb.h
diff --git a/include/asm-sh/kmap_types.h b/arch/sh/include/asm/kmap_types.h
index 84d565c696be..84d565c696be 100644
--- a/include/asm-sh/kmap_types.h
+++ b/arch/sh/include/asm/kmap_types.h
diff --git a/include/asm-sh/lboxre2.h b/arch/sh/include/asm/lboxre2.h
index e6d160504923..e6d160504923 100644
--- a/include/asm-sh/lboxre2.h
+++ b/arch/sh/include/asm/lboxre2.h
diff --git a/include/asm-sh/linkage.h b/arch/sh/include/asm/linkage.h
index 3565a4f4009f..3565a4f4009f 100644
--- a/include/asm-sh/linkage.h
+++ b/arch/sh/include/asm/linkage.h
diff --git a/include/asm-sh/local.h b/arch/sh/include/asm/local.h
index 9ed9b9cb459a..9ed9b9cb459a 100644
--- a/include/asm-sh/local.h
+++ b/arch/sh/include/asm/local.h
diff --git a/include/asm-sh/machvec.h b/arch/sh/include/asm/machvec.h
index b2e4124070ae..b2e4124070ae 100644
--- a/include/asm-sh/machvec.h
+++ b/arch/sh/include/asm/machvec.h
diff --git a/include/asm-sh/magicpanelr2.h b/arch/sh/include/asm/magicpanelr2.h
index c644a77ee357..c644a77ee357 100644
--- a/include/asm-sh/magicpanelr2.h
+++ b/arch/sh/include/asm/magicpanelr2.h
diff --git a/include/asm-sh/mc146818rtc.h b/arch/sh/include/asm/mc146818rtc.h
index 0aee96a97330..0aee96a97330 100644
--- a/include/asm-sh/mc146818rtc.h
+++ b/arch/sh/include/asm/mc146818rtc.h
diff --git a/include/asm-sh/microdev.h b/arch/sh/include/asm/microdev.h
index 1aed15856e11..1aed15856e11 100644
--- a/include/asm-sh/microdev.h
+++ b/arch/sh/include/asm/microdev.h
diff --git a/include/asm-sh/migor.h b/arch/sh/include/asm/migor.h
index 2329363afdc3..c12b632c540b 100644
--- a/include/asm-sh/migor.h
+++ b/arch/sh/include/asm/migor.h
@@ -16,10 +16,6 @@
 #include <asm/addrspace.h>
 
 /* GPIO */
-#define MSTPCR0 0xa4150030
-#define MSTPCR1 0xa4150034
-#define MSTPCR2 0xa4150038
-
 #define PORT_PACR 0xa4050100
 #define PORT_PDCR 0xa4050106
 #define PORT_PECR 0xa4050108
@@ -29,11 +25,16 @@
 #define PORT_PLCR 0xa4050114
 #define PORT_PMCR 0xa4050116
 #define PORT_PRCR 0xa405011c
+#define PORT_PTCR 0xa4050140
+#define PORT_PUCR 0xa4050142
+#define PORT_PVCR 0xa4050144
 #define PORT_PWCR 0xa4050146
 #define PORT_PXCR 0xa4050148
 #define PORT_PYCR 0xa405014a
 #define PORT_PZCR 0xa405014c
 #define PORT_PADR 0xa4050120
+#define PORT_PHDR 0xa405012e
+#define PORT_PTDR 0xa4050160
 #define PORT_PWDR 0xa4050166
 
 #define PORT_HIZCRA 0xa4050158
@@ -41,13 +42,11 @@
 
 #define PORT_MSELCRB 0xa4050182
 
-#define MSTPCR1 0xa4150034
-#define MSTPCR2 0xa4150038
-
 #define PORT_PSELA 0xa405014e
 #define PORT_PSELB 0xa4050150
 #define PORT_PSELC 0xa4050152
 #define PORT_PSELD 0xa4050154
+#define PORT_PSELE 0xa4050156
 
 #define PORT_HIZCRA 0xa4050158
 #define PORT_HIZCRB 0xa405015a
@@ -55,4 +54,9 @@
 
 #define BSC_CS6ABCR 0xfec1001c
 
+#include <asm/sh_mobile_lcdc.h>
+
+int migor_lcd_qvga_setup(void *board_data, void *sys_ops_handle,
+			 struct sh_mobile_lcdc_sys_bus_ops *sys_ops);
+
 #endif /* __ASM_SH_MIGOR_H */
diff --git a/include/asm-sh/mman.h b/arch/sh/include/asm/mman.h
index 156eb0225cf6..156eb0225cf6 100644
--- a/include/asm-sh/mman.h
+++ b/arch/sh/include/asm/mman.h
diff --git a/arch/sh/include/asm/mmu.h b/arch/sh/include/asm/mmu.h
new file mode 100644
index 000000000000..fdcb93bc6d11
--- /dev/null
+++ b/arch/sh/include/asm/mmu.h
@@ -0,0 +1,76 @@
+#ifndef __MMU_H
+#define __MMU_H
+
+/* Default "unsigned long" context */
+typedef unsigned long mm_context_id_t[NR_CPUS];
+
+typedef struct {
+#ifdef CONFIG_MMU
+	mm_context_id_t		id;
+	void			*vdso;
+#else
+	struct vm_list_struct	*vmlist;
+	unsigned long		end_brk;
+#endif
+#ifdef CONFIG_BINFMT_ELF_FDPIC
+	unsigned long		exec_fdpic_loadmap;
+	unsigned long		interp_fdpic_loadmap;
+#endif
+} mm_context_t;
+
+/*
+ * Privileged Space Mapping Buffer (PMB) definitions
+ */
+#define PMB_PASCR		0xff000070
+#define PMB_IRMCR		0xff000078
+
+#define PMB_ADDR		0xf6100000
+#define PMB_DATA		0xf7100000
+#define PMB_ENTRY_MAX		16
+#define PMB_E_MASK		0x0000000f
+#define PMB_E_SHIFT		8
+
+#define PMB_SZ_16M		0x00000000
+#define PMB_SZ_64M		0x00000010
+#define PMB_SZ_128M		0x00000080
+#define PMB_SZ_512M		0x00000090
+#define PMB_SZ_MASK		PMB_SZ_512M
+#define PMB_C			0x00000008
+#define PMB_WT			0x00000001
+#define PMB_UB			0x00000200
+#define PMB_V			0x00000100
+
+#define PMB_NO_ENTRY		(-1)
+
+struct pmb_entry;
+
+struct pmb_entry {
+	unsigned long vpn;
+	unsigned long ppn;
+	unsigned long flags;
+
+	/*
+	 * 0 .. NR_PMB_ENTRIES for specific entry selection, or
+	 * PMB_NO_ENTRY to search for a free one
+	 */
+	int entry;
+
+	struct pmb_entry *next;
+	/* Adjacent entry link for contiguous multi-entry mappings */
+	struct pmb_entry *link;
+};
+
+/* arch/sh/mm/pmb.c */
+int __set_pmb_entry(unsigned long vpn, unsigned long ppn,
+		    unsigned long flags, int *entry);
+int set_pmb_entry(struct pmb_entry *pmbe);
+void clear_pmb_entry(struct pmb_entry *pmbe);
+struct pmb_entry *pmb_alloc(unsigned long vpn, unsigned long ppn,
+			    unsigned long flags);
+void pmb_free(struct pmb_entry *pmbe);
+long pmb_remap(unsigned long virt, unsigned long phys,
+	       unsigned long size, unsigned long flags);
+void pmb_unmap(unsigned long addr);
+
+#endif /* __MMU_H */
+
diff --git a/arch/sh/include/asm/mmu_context.h b/arch/sh/include/asm/mmu_context.h
new file mode 100644
index 000000000000..04c0c9733ad6
--- /dev/null
+++ b/arch/sh/include/asm/mmu_context.h
@@ -0,0 +1,185 @@
+/*
+ * Copyright (C) 1999 Niibe Yutaka
+ * Copyright (C) 2003 - 2007 Paul Mundt
+ *
+ * ASID handling idea taken from MIPS implementation.
+ */
+#ifndef __ASM_SH_MMU_CONTEXT_H
+#define __ASM_SH_MMU_CONTEXT_H
+
+#ifdef __KERNEL__
+#include <cpu/mmu_context.h>
+#include <asm/tlbflush.h>
+#include <asm/uaccess.h>
+#include <asm/io.h>
+#include <asm-generic/mm_hooks.h>
+
+/*
+ * The MMU "context" consists of two things:
+ *    (a) TLB cache version (or round, cycle whatever expression you like)
+ *    (b) ASID (Address Space IDentifier)
+ */
+#define MMU_CONTEXT_ASID_MASK		0x000000ff
+#define MMU_CONTEXT_VERSION_MASK	0xffffff00
+#define MMU_CONTEXT_FIRST_VERSION	0x00000100
+#define NO_CONTEXT			0
+
+/* ASID is 8-bit value, so it can't be 0x100 */
+#define MMU_NO_ASID			0x100
+
+#define asid_cache(cpu)		(cpu_data[cpu].asid_cache)
+
+#ifdef CONFIG_MMU
+#define cpu_context(cpu, mm)	((mm)->context.id[cpu])
+
+#define cpu_asid(cpu, mm)	\
+	(cpu_context((cpu), (mm)) & MMU_CONTEXT_ASID_MASK)
+
+/*
+ * Virtual Page Number mask
+ */
+#define MMU_VPN_MASK	0xfffff000
+
+#if defined(CONFIG_SUPERH32)
+#include "mmu_context_32.h"
+#else
+#include "mmu_context_64.h"
+#endif
+
+/*
+ * Get MMU context if needed.
+ */
+static inline void get_mmu_context(struct mm_struct *mm, unsigned int cpu)
+{
+	unsigned long asid = asid_cache(cpu);
+
+	/* Check if we have old version of context. */
+	if (((cpu_context(cpu, mm) ^ asid) & MMU_CONTEXT_VERSION_MASK) == 0)
+		/* It's up to date, do nothing */
+		return;
+
+	/* It's old, we need to get new context with new version. */
+	if (!(++asid & MMU_CONTEXT_ASID_MASK)) {
+		/*
+		 * We exhaust ASID of this version.
+		 * Flush all TLB and start new cycle.
+		 */
+		flush_tlb_all();
+
+#ifdef CONFIG_SUPERH64
+		/*
+		 * The SH-5 cache uses the ASIDs, requiring both the I and D
+		 * cache to be flushed when the ASID is exhausted. Weak.
+		 */
+		flush_cache_all();
+#endif
+
+		/*
+		 * Fix version; Note that we avoid version #0
+		 * to distingush NO_CONTEXT.
+		 */
+		if (!asid)
+			asid = MMU_CONTEXT_FIRST_VERSION;
+	}
+
+	cpu_context(cpu, mm) = asid_cache(cpu) = asid;
+}
+
+/*
+ * Initialize the context related info for a new mm_struct
+ * instance.
+ */
+static inline int init_new_context(struct task_struct *tsk,
+				   struct mm_struct *mm)
+{
+	int i;
+
+	for (i = 0; i < num_online_cpus(); i++)
+		cpu_context(i, mm) = NO_CONTEXT;
+
+	return 0;
+}
+
+/*
+ * After we have set current->mm to a new value, this activates
+ * the context for the new mm so we see the new mappings.
+ */
+static inline void activate_context(struct mm_struct *mm, unsigned int cpu)
+{
+	get_mmu_context(mm, cpu);
+	set_asid(cpu_asid(cpu, mm));
+}
+
+static inline void switch_mm(struct mm_struct *prev,
+			     struct mm_struct *next,
+			     struct task_struct *tsk)
+{
+	unsigned int cpu = smp_processor_id();
+
+	if (likely(prev != next)) {
+		cpu_set(cpu, next->cpu_vm_mask);
+		set_TTB(next->pgd);
+		activate_context(next, cpu);
+	} else
+		if (!cpu_test_and_set(cpu, next->cpu_vm_mask))
+			activate_context(next, cpu);
+}
+#else
+#define get_mmu_context(mm)		do { } while (0)
+#define init_new_context(tsk,mm)	(0)
+#define destroy_context(mm)		do { } while (0)
+#define set_asid(asid)			do { } while (0)
+#define get_asid()			(0)
+#define cpu_asid(cpu, mm)		({ (void)cpu; 0; })
+#define switch_and_save_asid(asid)	(0)
+#define set_TTB(pgd)			do { } while (0)
+#define get_TTB()			(0)
+#define activate_context(mm,cpu)	do { } while (0)
+#define switch_mm(prev,next,tsk)	do { } while (0)
+#endif /* CONFIG_MMU */
+
+#define activate_mm(prev, next)		switch_mm((prev),(next),NULL)
+#define deactivate_mm(tsk,mm)		do { } while (0)
+#define enter_lazy_tlb(mm,tsk)		do { } while (0)
+
+#if defined(CONFIG_CPU_SH3) || defined(CONFIG_CPU_SH4)
+/*
+ * If this processor has an MMU, we need methods to turn it off/on ..
+ * paging_init() will also have to be updated for the processor in
+ * question.
+ */
+static inline void enable_mmu(void)
+{
+	unsigned int cpu = smp_processor_id();
+
+	/* Enable MMU */
+	ctrl_outl(MMU_CONTROL_INIT, MMUCR);
+	ctrl_barrier();
+
+	if (asid_cache(cpu) == NO_CONTEXT)
+		asid_cache(cpu) = MMU_CONTEXT_FIRST_VERSION;
+
+	set_asid(asid_cache(cpu) & MMU_CONTEXT_ASID_MASK);
+}
+
+static inline void disable_mmu(void)
+{
+	unsigned long cr;
+
+	cr = ctrl_inl(MMUCR);
+	cr &= ~MMU_CONTROL_INIT;
+	ctrl_outl(cr, MMUCR);
+
+	ctrl_barrier();
+}
+#else
+/*
+ * MMU control handlers for processors lacking memory
+ * management hardware.
+ */
+#define enable_mmu()	do { } while (0)
+#define disable_mmu()	do { } while (0)
+#endif
+
+#endif /* __KERNEL__ */
+#endif /* __ASM_SH_MMU_CONTEXT_H */
diff --git a/include/asm-sh/mmu_context_32.h b/arch/sh/include/asm/mmu_context_32.h
index f4f9aebd68b7..f4f9aebd68b7 100644
--- a/include/asm-sh/mmu_context_32.h
+++ b/arch/sh/include/asm/mmu_context_32.h
diff --git a/include/asm-sh/mmu_context_64.h b/arch/sh/include/asm/mmu_context_64.h
index 9649f1c07caf..de121025d87f 100644
--- a/include/asm-sh/mmu_context_64.h
+++ b/arch/sh/include/asm/mmu_context_64.h
@@ -11,7 +11,7 @@
  * License.  See the file "COPYING" in the main directory of this archive
  * for more details.
  */
-#include <asm/cpu/registers.h>
+#include <cpu/registers.h>
 #include <asm/cacheflush.h>
 
 #define SR_ASID_MASK		0xffffffffff00ffffULL
diff --git a/include/asm-sh/mmzone.h b/arch/sh/include/asm/mmzone.h
index 2969253c4042..2969253c4042 100644
--- a/include/asm-sh/mmzone.h
+++ b/arch/sh/include/asm/mmzone.h
diff --git a/include/asm-sh/module.h b/arch/sh/include/asm/module.h
index 46eccd331660..46eccd331660 100644
--- a/include/asm-sh/module.h
+++ b/arch/sh/include/asm/module.h
diff --git a/include/asm-sh/msgbuf.h b/arch/sh/include/asm/msgbuf.h
index 517432343fb5..517432343fb5 100644
--- a/include/asm-sh/msgbuf.h
+++ b/arch/sh/include/asm/msgbuf.h
diff --git a/include/asm-sh/mutex.h b/arch/sh/include/asm/mutex.h
index 458c1f7fbc18..458c1f7fbc18 100644
--- a/include/asm-sh/mutex.h
+++ b/arch/sh/include/asm/mutex.h
diff --git a/arch/sh/include/asm/page.h b/arch/sh/include/asm/page.h
new file mode 100644
index 000000000000..77fb8bf02e4e
--- /dev/null
+++ b/arch/sh/include/asm/page.h
@@ -0,0 +1,183 @@
+#ifndef __ASM_SH_PAGE_H
+#define __ASM_SH_PAGE_H
+
+/*
+ * Copyright (C) 1999  Niibe Yutaka
+ */
+
+#include <linux/const.h>
+
+/* PAGE_SHIFT determines the page size */
+#if defined(CONFIG_PAGE_SIZE_4KB)
+# define PAGE_SHIFT	12
+#elif defined(CONFIG_PAGE_SIZE_8KB)
+# define PAGE_SHIFT	13
+#elif defined(CONFIG_PAGE_SIZE_16KB)
+# define PAGE_SHIFT	14
+#elif defined(CONFIG_PAGE_SIZE_64KB)
+# define PAGE_SHIFT	16
+#else
+# error "Bogus kernel page size?"
+#endif
+
+#define PAGE_SIZE	(_AC(1, UL) << PAGE_SHIFT)
+#define PAGE_MASK	(~(PAGE_SIZE-1))
+#define PTE_MASK	PAGE_MASK
+
+#if defined(CONFIG_HUGETLB_PAGE_SIZE_64K)
+#define HPAGE_SHIFT	16
+#elif defined(CONFIG_HUGETLB_PAGE_SIZE_256K)
+#define HPAGE_SHIFT	18
+#elif defined(CONFIG_HUGETLB_PAGE_SIZE_1MB)
+#define HPAGE_SHIFT	20
+#elif defined(CONFIG_HUGETLB_PAGE_SIZE_4MB)
+#define HPAGE_SHIFT	22
+#elif defined(CONFIG_HUGETLB_PAGE_SIZE_64MB)
+#define HPAGE_SHIFT	26
+#elif defined(CONFIG_HUGETLB_PAGE_SIZE_512MB)
+#define HPAGE_SHIFT	29
+#endif
+
+#ifdef CONFIG_HUGETLB_PAGE
+#define HPAGE_SIZE		(1UL << HPAGE_SHIFT)
+#define HPAGE_MASK		(~(HPAGE_SIZE-1))
+#define HUGETLB_PAGE_ORDER	(HPAGE_SHIFT-PAGE_SHIFT)
+#endif
+
+#ifndef __ASSEMBLY__
+
+extern unsigned long shm_align_mask;
+extern unsigned long max_low_pfn, min_low_pfn;
+extern unsigned long memory_start, memory_end;
+
+extern void clear_page(void *to);
+extern void copy_page(void *to, void *from);
+
+#if !defined(CONFIG_CACHE_OFF) && defined(CONFIG_MMU) && \
+	(defined(CONFIG_CPU_SH5) || defined(CONFIG_CPU_SH4) || \
+	 defined(CONFIG_SH7705_CACHE_32KB))
+struct page;
+struct vm_area_struct;
+extern void clear_user_page(void *to, unsigned long address, struct page *page);
+extern void copy_user_page(void *to, void *from, unsigned long address,
+			   struct page *page);
+#if defined(CONFIG_CPU_SH4)
+extern void copy_user_highpage(struct page *to, struct page *from,
+			       unsigned long vaddr, struct vm_area_struct *vma);
+#define __HAVE_ARCH_COPY_USER_HIGHPAGE
+#endif
+#else
+#define clear_user_page(page, vaddr, pg)	clear_page(page)
+#define copy_user_page(to, from, vaddr, pg)	copy_page(to, from)
+#endif
+
+/*
+ * These are used to make use of C type-checking..
+ */
+#ifdef CONFIG_X2TLB
+typedef struct { unsigned long pte_low, pte_high; } pte_t;
+typedef struct { unsigned long long pgprot; } pgprot_t;
+typedef struct { unsigned long long pgd; } pgd_t;
+#define pte_val(x) \
+	((x).pte_low | ((unsigned long long)(x).pte_high << 32))
+#define __pte(x) \
+	({ pte_t __pte = {(x), ((unsigned long long)(x)) >> 32}; __pte; })
+#elif defined(CONFIG_SUPERH32)
+typedef struct { unsigned long pte_low; } pte_t;
+typedef struct { unsigned long pgprot; } pgprot_t;
+typedef struct { unsigned long pgd; } pgd_t;
+#define pte_val(x)	((x).pte_low)
+#define __pte(x)	((pte_t) { (x) } )
+#else
+typedef struct { unsigned long long pte_low; } pte_t;
+typedef struct { unsigned long pgprot; } pgprot_t;
+typedef struct { unsigned long pgd; } pgd_t;
+#define pte_val(x)	((x).pte_low)
+#define __pte(x)	((pte_t) { (x) } )
+#endif
+
+#define pgd_val(x)	((x).pgd)
+#define pgprot_val(x)	((x).pgprot)
+
+#define __pgd(x) ((pgd_t) { (x) } )
+#define __pgprot(x)	((pgprot_t) { (x) } )
+
+typedef struct page *pgtable_t;
+
+#endif /* !__ASSEMBLY__ */
+
+/*
+ * __MEMORY_START and SIZE are the physical addresses and size of RAM.
+ */
+#define __MEMORY_START		CONFIG_MEMORY_START
+#define __MEMORY_SIZE		CONFIG_MEMORY_SIZE
+
+/*
+ * PAGE_OFFSET is the virtual address of the start of kernel address
+ * space.
+ */
+#define PAGE_OFFSET		CONFIG_PAGE_OFFSET
+
+/*
+ * Virtual to physical RAM address translation.
+ *
+ * In 29 bit mode, the physical offset of RAM from address 0 is visible in
+ * the kernel virtual address space, and thus we don't have to take
+ * this into account when translating. However in 32 bit mode this offset
+ * is not visible (it is part of the PMB mapping) and so needs to be
+ * added or subtracted as required.
+ */
+#ifdef CONFIG_32BIT
+#define __pa(x)	((unsigned long)(x)-PAGE_OFFSET+__MEMORY_START)
+#define __va(x)	((void *)((unsigned long)(x)+PAGE_OFFSET-__MEMORY_START))
+#else
+#define __pa(x)	((unsigned long)(x)-PAGE_OFFSET)
+#define __va(x)	((void *)((unsigned long)(x)+PAGE_OFFSET))
+#endif
+
+#define pfn_to_kaddr(pfn)	__va((pfn) << PAGE_SHIFT)
+#define page_to_phys(page)	(page_to_pfn(page) << PAGE_SHIFT)
+
+/*
+ * PFN = physical frame number (ie PFN 0 == physical address 0)
+ * PFN_START is the PFN of the first page of RAM. By defining this we
+ * don't have struct page entries for the portion of address space
+ * between physical address 0 and the start of RAM.
+ */
+#define PFN_START		(__MEMORY_START >> PAGE_SHIFT)
+#define ARCH_PFN_OFFSET		(PFN_START)
+#define virt_to_page(kaddr)	pfn_to_page(__pa(kaddr) >> PAGE_SHIFT)
+#ifdef CONFIG_FLATMEM
+#define pfn_valid(pfn)		((pfn) >= min_low_pfn && (pfn) < max_low_pfn)
+#endif
+#define virt_addr_valid(kaddr)	pfn_valid(__pa(kaddr) >> PAGE_SHIFT)
+
+#define VM_DATA_DEFAULT_FLAGS	(VM_READ | VM_WRITE | VM_EXEC | \
+				 VM_MAYREAD | VM_MAYWRITE | VM_MAYEXEC)
+
+#include <asm-generic/memory_model.h>
+#include <asm-generic/page.h>
+
+/* vDSO support */
+#ifdef CONFIG_VSYSCALL
+#define __HAVE_ARCH_GATE_AREA
+#endif
+
+/*
+ * Some drivers need to perform DMA into kmalloc'ed buffers
+ * and so we have to increase the kmalloc minalign for this.
+ */
+#define ARCH_KMALLOC_MINALIGN	L1_CACHE_BYTES
+
+#ifdef CONFIG_SUPERH64
+/*
+ * While BYTES_PER_WORD == 4 on the current sh64 ABI, GCC will still
+ * happily generate {ld/st}.q pairs, requiring us to have 8-byte
+ * alignment to avoid traps. The kmalloc alignment is gauranteed by
+ * virtue of L1_CACHE_BYTES, requiring this to only be special cased
+ * for slab caches.
+ */
+#define ARCH_SLAB_MINALIGN	8
+#endif
+
+#endif /* __ASM_SH_PAGE_H */
diff --git a/include/asm-sh/param.h b/arch/sh/include/asm/param.h
index ae245afdfd6a..ae245afdfd6a 100644
--- a/include/asm-sh/param.h
+++ b/arch/sh/include/asm/param.h
diff --git a/include/asm-sh/parport.h b/arch/sh/include/asm/parport.h
index f67ba60a2acd..f67ba60a2acd 100644
--- a/include/asm-sh/parport.h
+++ b/arch/sh/include/asm/parport.h
diff --git a/include/asm-sh/pci.h b/arch/sh/include/asm/pci.h
index df1d383e18a5..df1d383e18a5 100644
--- a/include/asm-sh/pci.h
+++ b/arch/sh/include/asm/pci.h
diff --git a/include/asm-sh/percpu.h b/arch/sh/include/asm/percpu.h
index 4db4b39a4399..4db4b39a4399 100644
--- a/include/asm-sh/percpu.h
+++ b/arch/sh/include/asm/percpu.h
diff --git a/include/asm-sh/pgalloc.h b/arch/sh/include/asm/pgalloc.h
index 84dd2db7104c..84dd2db7104c 100644
--- a/include/asm-sh/pgalloc.h
+++ b/arch/sh/include/asm/pgalloc.h
diff --git a/include/asm-sh/pgtable.h b/arch/sh/include/asm/pgtable.h
index a4a8f8b93463..a4a8f8b93463 100644
--- a/include/asm-sh/pgtable.h
+++ b/arch/sh/include/asm/pgtable.h
diff --git a/arch/sh/include/asm/pgtable_32.h b/arch/sh/include/asm/pgtable_32.h
new file mode 100644
index 000000000000..72ea209195bd
--- /dev/null
+++ b/arch/sh/include/asm/pgtable_32.h
@@ -0,0 +1,479 @@
+#ifndef __ASM_SH_PGTABLE_32_H
+#define __ASM_SH_PGTABLE_32_H
+
+/*
+ * Linux PTEL encoding.
+ *
+ * Hardware and software bit definitions for the PTEL value (see below for
+ * notes on SH-X2 MMUs and 64-bit PTEs):
+ *
+ * - Bits 0 and 7 are reserved on SH-3 (_PAGE_WT and _PAGE_SZ1 on SH-4).
+ *
+ * - Bit 1 is the SH-bit, but is unused on SH-3 due to an MMU bug (the
+ *   hardware PTEL value can't have the SH-bit set when MMUCR.IX is set,
+ *   which is the default in cpu-sh3/mmu_context.h:MMU_CONTROL_INIT).
+ *
+ *   In order to keep this relatively clean, do not use these for defining
+ *   SH-3 specific flags until all of the other unused bits have been
+ *   exhausted.
+ *
+ * - Bit 9 is reserved by everyone and used by _PAGE_PROTNONE.
+ *
+ * - Bits 10 and 11 are low bits of the PPN that are reserved on >= 4K pages.
+ *   Bit 10 is used for _PAGE_ACCESSED, bit 11 remains unused.
+ *
+ * - On 29 bit platforms, bits 31 to 29 are used for the space attributes
+ *   and timing control which (together with bit 0) are moved into the
+ *   old-style PTEA on the parts that support it.
+ *
+ * XXX: Leave the _PAGE_FILE and _PAGE_WT overhaul for a rainy day.
+ *
+ * SH-X2 MMUs and extended PTEs
+ *
+ * SH-X2 supports an extended mode TLB with split data arrays due to the
+ * number of bits needed for PR and SZ (now EPR and ESZ) encodings. The PR and
+ * SZ bit placeholders still exist in data array 1, but are implemented as
+ * reserved bits, with the real logic existing in data array 2.
+ *
+ * The downside to this is that we can no longer fit everything in to a 32-bit
+ * PTE encoding, so a 64-bit pte_t is necessary for these parts. On the plus
+ * side, this gives us quite a few spare bits to play with for future usage.
+ */
+/* Legacy and compat mode bits */
+#define	_PAGE_WT	0x001		/* WT-bit on SH-4, 0 on SH-3 */
+#define _PAGE_HW_SHARED	0x002		/* SH-bit  : shared among processes */
+#define _PAGE_DIRTY	0x004		/* D-bit   : page changed */
+#define _PAGE_CACHABLE	0x008		/* C-bit   : cachable */
+#define _PAGE_SZ0	0x010		/* SZ0-bit : Size of page */
+#define _PAGE_RW	0x020		/* PR0-bit : write access allowed */
+#define _PAGE_USER	0x040		/* PR1-bit : user space access allowed*/
+#define _PAGE_SZ1	0x080		/* SZ1-bit : Size of page (on SH-4) */
+#define _PAGE_PRESENT	0x100		/* V-bit   : page is valid */
+#define _PAGE_PROTNONE	0x200		/* software: if not present  */
+#define _PAGE_ACCESSED	0x400		/* software: page referenced */
+#define _PAGE_FILE	_PAGE_WT	/* software: pagecache or swap? */
+
+#define _PAGE_SZ_MASK	(_PAGE_SZ0 | _PAGE_SZ1)
+#define _PAGE_PR_MASK	(_PAGE_RW | _PAGE_USER)
+
+/* Extended mode bits */
+#define _PAGE_EXT_ESZ0		0x0010	/* ESZ0-bit: Size of page */
+#define _PAGE_EXT_ESZ1		0x0020	/* ESZ1-bit: Size of page */
+#define _PAGE_EXT_ESZ2		0x0040	/* ESZ2-bit: Size of page */
+#define _PAGE_EXT_ESZ3		0x0080	/* ESZ3-bit: Size of page */
+
+#define _PAGE_EXT_USER_EXEC	0x0100	/* EPR0-bit: User space executable */
+#define _PAGE_EXT_USER_WRITE	0x0200	/* EPR1-bit: User space writable */
+#define _PAGE_EXT_USER_READ	0x0400	/* EPR2-bit: User space readable */
+
+#define _PAGE_EXT_KERN_EXEC	0x0800	/* EPR3-bit: Kernel space executable */
+#define _PAGE_EXT_KERN_WRITE	0x1000	/* EPR4-bit: Kernel space writable */
+#define _PAGE_EXT_KERN_READ	0x2000	/* EPR5-bit: Kernel space readable */
+
+/* Wrapper for extended mode pgprot twiddling */
+#define _PAGE_EXT(x)		((unsigned long long)(x) << 32)
+
+/* software: moves to PTEA.TC (Timing Control) */
+#define _PAGE_PCC_AREA5	0x00000000	/* use BSC registers for area5 */
+#define _PAGE_PCC_AREA6	0x80000000	/* use BSC registers for area6 */
+
+/* software: moves to PTEA.SA[2:0] (Space Attributes) */
+#define _PAGE_PCC_IODYN 0x00000001	/* IO space, dynamically sized bus */
+#define _PAGE_PCC_IO8	0x20000000	/* IO space, 8 bit bus */
+#define _PAGE_PCC_IO16	0x20000001	/* IO space, 16 bit bus */
+#define _PAGE_PCC_COM8	0x40000000	/* Common Memory space, 8 bit bus */
+#define _PAGE_PCC_COM16	0x40000001	/* Common Memory space, 16 bit bus */
+#define _PAGE_PCC_ATR8	0x60000000	/* Attribute Memory space, 8 bit bus */
+#define _PAGE_PCC_ATR16	0x60000001	/* Attribute Memory space, 6 bit bus */
+
+/* Mask which drops unused bits from the PTEL value */
+#if defined(CONFIG_CPU_SH3)
+#define _PAGE_CLEAR_FLAGS	(_PAGE_PROTNONE | _PAGE_ACCESSED| \
+				 _PAGE_FILE	| _PAGE_SZ1	| \
+				 _PAGE_HW_SHARED)
+#elif defined(CONFIG_X2TLB)
+/* Get rid of the legacy PR/SZ bits when using extended mode */
+#define _PAGE_CLEAR_FLAGS	(_PAGE_PROTNONE | _PAGE_ACCESSED | \
+				 _PAGE_FILE | _PAGE_PR_MASK | _PAGE_SZ_MASK)
+#else
+#define _PAGE_CLEAR_FLAGS	(_PAGE_PROTNONE | _PAGE_ACCESSED | _PAGE_FILE)
+#endif
+
+#define _PAGE_FLAGS_HARDWARE_MASK	(PHYS_ADDR_MASK & ~(_PAGE_CLEAR_FLAGS))
+
+/* Hardware flags, page size encoding */
+#if !defined(CONFIG_MMU)
+# define _PAGE_FLAGS_HARD	0ULL
+#elif defined(CONFIG_X2TLB)
+# if defined(CONFIG_PAGE_SIZE_4KB)
+#  define _PAGE_FLAGS_HARD	_PAGE_EXT(_PAGE_EXT_ESZ0)
+# elif defined(CONFIG_PAGE_SIZE_8KB)
+#  define _PAGE_FLAGS_HARD	_PAGE_EXT(_PAGE_EXT_ESZ1)
+# elif defined(CONFIG_PAGE_SIZE_64KB)
+#  define _PAGE_FLAGS_HARD	_PAGE_EXT(_PAGE_EXT_ESZ2)
+# endif
+#else
+# if defined(CONFIG_PAGE_SIZE_4KB)
+#  define _PAGE_FLAGS_HARD	_PAGE_SZ0
+# elif defined(CONFIG_PAGE_SIZE_64KB)
+#  define _PAGE_FLAGS_HARD	_PAGE_SZ1
+# endif
+#endif
+
+#if defined(CONFIG_X2TLB)
+# if defined(CONFIG_HUGETLB_PAGE_SIZE_64K)
+#  define _PAGE_SZHUGE	(_PAGE_EXT_ESZ2)
+# elif defined(CONFIG_HUGETLB_PAGE_SIZE_256K)
+#  define _PAGE_SZHUGE	(_PAGE_EXT_ESZ0 | _PAGE_EXT_ESZ2)
+# elif defined(CONFIG_HUGETLB_PAGE_SIZE_1MB)
+#  define _PAGE_SZHUGE	(_PAGE_EXT_ESZ0 | _PAGE_EXT_ESZ1 | _PAGE_EXT_ESZ2)
+# elif defined(CONFIG_HUGETLB_PAGE_SIZE_4MB)
+#  define _PAGE_SZHUGE	(_PAGE_EXT_ESZ3)
+# elif defined(CONFIG_HUGETLB_PAGE_SIZE_64MB)
+#  define _PAGE_SZHUGE	(_PAGE_EXT_ESZ2 | _PAGE_EXT_ESZ3)
+# endif
+#else
+# if defined(CONFIG_HUGETLB_PAGE_SIZE_64K)
+#  define _PAGE_SZHUGE	(_PAGE_SZ1)
+# elif defined(CONFIG_HUGETLB_PAGE_SIZE_1MB)
+#  define _PAGE_SZHUGE	(_PAGE_SZ0 | _PAGE_SZ1)
+# endif
+#endif
+
+/*
+ * Stub out _PAGE_SZHUGE if we don't have a good definition for it,
+ * to make pte_mkhuge() happy.
+ */
+#ifndef _PAGE_SZHUGE
+# define _PAGE_SZHUGE	(_PAGE_FLAGS_HARD)
+#endif
+
+#define _PAGE_CHG_MASK \
+	(PTE_MASK | _PAGE_ACCESSED | _PAGE_CACHABLE | _PAGE_DIRTY)
+
+#ifndef __ASSEMBLY__
+
+#if defined(CONFIG_X2TLB) /* SH-X2 TLB */
+#define PAGE_NONE	__pgprot(_PAGE_PROTNONE | _PAGE_CACHABLE | \
+				 _PAGE_ACCESSED | _PAGE_FLAGS_HARD)
+
+#define PAGE_SHARED	__pgprot(_PAGE_PRESENT | _PAGE_ACCESSED | \
+				 _PAGE_CACHABLE | _PAGE_FLAGS_HARD | \
+				 _PAGE_EXT(_PAGE_EXT_KERN_READ  | \
+					   _PAGE_EXT_KERN_WRITE | \
+					   _PAGE_EXT_USER_READ  | \
+					   _PAGE_EXT_USER_WRITE))
+
+#define PAGE_EXECREAD	__pgprot(_PAGE_PRESENT | _PAGE_ACCESSED | \
+				 _PAGE_CACHABLE | _PAGE_FLAGS_HARD | \
+				 _PAGE_EXT(_PAGE_EXT_KERN_EXEC | \
+					   _PAGE_EXT_KERN_READ | \
+					   _PAGE_EXT_USER_EXEC | \
+					   _PAGE_EXT_USER_READ))
+
+#define PAGE_COPY	PAGE_EXECREAD
+
+#define PAGE_READONLY	__pgprot(_PAGE_PRESENT | _PAGE_ACCESSED | \
+				 _PAGE_CACHABLE | _PAGE_FLAGS_HARD | \
+				 _PAGE_EXT(_PAGE_EXT_KERN_READ | \
+					   _PAGE_EXT_USER_READ))
+
+#define PAGE_WRITEONLY	__pgprot(_PAGE_PRESENT | _PAGE_ACCESSED | \
+				 _PAGE_CACHABLE | _PAGE_FLAGS_HARD | \
+				 _PAGE_EXT(_PAGE_EXT_KERN_WRITE | \
+					   _PAGE_EXT_USER_WRITE))
+
+#define PAGE_RWX	__pgprot(_PAGE_PRESENT | _PAGE_ACCESSED | \
+				 _PAGE_CACHABLE | _PAGE_FLAGS_HARD | \
+				 _PAGE_EXT(_PAGE_EXT_KERN_WRITE | \
+					   _PAGE_EXT_KERN_READ  | \
+					   _PAGE_EXT_KERN_EXEC  | \
+					   _PAGE_EXT_USER_WRITE | \
+					   _PAGE_EXT_USER_READ  | \
+					   _PAGE_EXT_USER_EXEC))
+
+#define PAGE_KERNEL	__pgprot(_PAGE_PRESENT | _PAGE_CACHABLE | \
+				 _PAGE_DIRTY | _PAGE_ACCESSED | \
+				 _PAGE_HW_SHARED | _PAGE_FLAGS_HARD | \
+				 _PAGE_EXT(_PAGE_EXT_KERN_READ | \
+					   _PAGE_EXT_KERN_WRITE | \
+					   _PAGE_EXT_KERN_EXEC))
+
+#define PAGE_KERNEL_NOCACHE \
+			__pgprot(_PAGE_PRESENT | _PAGE_DIRTY | \
+				 _PAGE_ACCESSED | _PAGE_HW_SHARED | \
+				 _PAGE_FLAGS_HARD | \
+				 _PAGE_EXT(_PAGE_EXT_KERN_READ | \
+					   _PAGE_EXT_KERN_WRITE | \
+					   _PAGE_EXT_KERN_EXEC))
+
+#define PAGE_KERNEL_RO	__pgprot(_PAGE_PRESENT | _PAGE_CACHABLE | \
+				 _PAGE_DIRTY | _PAGE_ACCESSED | \
+				 _PAGE_HW_SHARED | _PAGE_FLAGS_HARD | \
+				 _PAGE_EXT(_PAGE_EXT_KERN_READ | \
+					   _PAGE_EXT_KERN_EXEC))
+
+#define PAGE_KERNEL_PCC(slot, type) \
+			__pgprot(_PAGE_PRESENT | _PAGE_DIRTY | \
+				 _PAGE_ACCESSED | _PAGE_FLAGS_HARD | \
+				 _PAGE_EXT(_PAGE_EXT_KERN_READ | \
+					   _PAGE_EXT_KERN_WRITE | \
+					   _PAGE_EXT_KERN_EXEC) \
+				 (slot ? _PAGE_PCC_AREA5 : _PAGE_PCC_AREA6) | \
+				 (type))
+
+#elif defined(CONFIG_MMU) /* SH-X TLB */
+#define PAGE_NONE	__pgprot(_PAGE_PROTNONE | _PAGE_CACHABLE | \
+				 _PAGE_ACCESSED | _PAGE_FLAGS_HARD)
+
+#define PAGE_SHARED	__pgprot(_PAGE_PRESENT | _PAGE_RW | _PAGE_USER | \
+				 _PAGE_CACHABLE | _PAGE_ACCESSED | \
+				 _PAGE_FLAGS_HARD)
+
+#define PAGE_COPY	__pgprot(_PAGE_PRESENT | _PAGE_USER | _PAGE_CACHABLE | \
+				 _PAGE_ACCESSED | _PAGE_FLAGS_HARD)
+
+#define PAGE_READONLY	__pgprot(_PAGE_PRESENT | _PAGE_USER | _PAGE_CACHABLE | \
+				 _PAGE_ACCESSED | _PAGE_FLAGS_HARD)
+
+#define PAGE_EXECREAD	PAGE_READONLY
+#define PAGE_RWX	PAGE_SHARED
+#define PAGE_WRITEONLY	PAGE_SHARED
+
+#define PAGE_KERNEL	__pgprot(_PAGE_PRESENT | _PAGE_RW | _PAGE_CACHABLE | \
+				 _PAGE_DIRTY | _PAGE_ACCESSED | \
+				 _PAGE_HW_SHARED | _PAGE_FLAGS_HARD)
+
+#define PAGE_KERNEL_NOCACHE \
+			__pgprot(_PAGE_PRESENT | _PAGE_RW | _PAGE_DIRTY | \
+				 _PAGE_ACCESSED | _PAGE_HW_SHARED | \
+				 _PAGE_FLAGS_HARD)
+
+#define PAGE_KERNEL_RO	__pgprot(_PAGE_PRESENT | _PAGE_CACHABLE | \
+				 _PAGE_DIRTY | _PAGE_ACCESSED | \
+				 _PAGE_HW_SHARED | _PAGE_FLAGS_HARD)
+
+#define PAGE_KERNEL_PCC(slot, type) \
+			__pgprot(_PAGE_PRESENT | _PAGE_RW | _PAGE_DIRTY | \
+				 _PAGE_ACCESSED | _PAGE_FLAGS_HARD | \
+				 (slot ? _PAGE_PCC_AREA5 : _PAGE_PCC_AREA6) | \
+				 (type))
+#else /* no mmu */
+#define PAGE_NONE		__pgprot(0)
+#define PAGE_SHARED		__pgprot(0)
+#define PAGE_COPY		__pgprot(0)
+#define PAGE_EXECREAD		__pgprot(0)
+#define PAGE_RWX		__pgprot(0)
+#define PAGE_READONLY		__pgprot(0)
+#define PAGE_WRITEONLY		__pgprot(0)
+#define PAGE_KERNEL		__pgprot(0)
+#define PAGE_KERNEL_NOCACHE	__pgprot(0)
+#define PAGE_KERNEL_RO		__pgprot(0)
+
+#define PAGE_KERNEL_PCC(slot, type) \
+				__pgprot(0)
+#endif
+
+#endif /* __ASSEMBLY__ */
+
+#ifndef __ASSEMBLY__
+
+/*
+ * Certain architectures need to do special things when PTEs
+ * within a page table are directly modified.  Thus, the following
+ * hook is made available.
+ */
+#ifdef CONFIG_X2TLB
+static inline void set_pte(pte_t *ptep, pte_t pte)
+{
+	ptep->pte_high = pte.pte_high;
+	smp_wmb();
+	ptep->pte_low = pte.pte_low;
+}
+#else
+#define set_pte(pteptr, pteval) (*(pteptr) = pteval)
+#endif
+
+#define set_pte_at(mm,addr,ptep,pteval) set_pte(ptep,pteval)
+
+/*
+ * (pmds are folded into pgds so this doesn't get actually called,
+ * but the define is needed for a generic inline function.)
+ */
+#define set_pmd(pmdptr, pmdval) (*(pmdptr) = pmdval)
+
+#define pfn_pte(pfn, prot) \
+	__pte(((unsigned long long)(pfn) << PAGE_SHIFT) | pgprot_val(prot))
+#define pfn_pmd(pfn, prot) \
+	__pmd(((unsigned long long)(pfn) << PAGE_SHIFT) | pgprot_val(prot))
+
+#define pte_none(x)		(!pte_val(x))
+#define pte_present(x)		((x).pte_low & (_PAGE_PRESENT | _PAGE_PROTNONE))
+
+#define pte_clear(mm,addr,xp) do { set_pte_at(mm, addr, xp, __pte(0)); } while (0)
+
+#define pmd_none(x)	(!pmd_val(x))
+#define pmd_present(x)	(pmd_val(x))
+#define pmd_clear(xp)	do { set_pmd(xp, __pmd(0)); } while (0)
+#define	pmd_bad(x)	(pmd_val(x) & ~PAGE_MASK)
+
+#define pages_to_mb(x)	((x) >> (20-PAGE_SHIFT))
+#define pte_page(x)	pfn_to_page(pte_pfn(x))
+
+/*
+ * The following only work if pte_present() is true.
+ * Undefined behaviour if not..
+ */
+#define pte_not_present(pte)	(!((pte).pte_low & _PAGE_PRESENT))
+#define pte_dirty(pte)		((pte).pte_low & _PAGE_DIRTY)
+#define pte_young(pte)		((pte).pte_low & _PAGE_ACCESSED)
+#define pte_file(pte)		((pte).pte_low & _PAGE_FILE)
+#define pte_special(pte)	(0)
+
+#ifdef CONFIG_X2TLB
+#define pte_write(pte)		((pte).pte_high & _PAGE_EXT_USER_WRITE)
+#else
+#define pte_write(pte)		((pte).pte_low & _PAGE_RW)
+#endif
+
+#define PTE_BIT_FUNC(h,fn,op) \
+static inline pte_t pte_##fn(pte_t pte) { pte.pte_##h op; return pte; }
+
+#ifdef CONFIG_X2TLB
+/*
+ * We cheat a bit in the SH-X2 TLB case. As the permission bits are
+ * individually toggled (and user permissions are entirely decoupled from
+ * kernel permissions), we attempt to couple them a bit more sanely here.
+ */
+PTE_BIT_FUNC(high, wrprotect, &= ~_PAGE_EXT_USER_WRITE);
+PTE_BIT_FUNC(high, mkwrite, |= _PAGE_EXT_USER_WRITE | _PAGE_EXT_KERN_WRITE);
+PTE_BIT_FUNC(high, mkhuge, |= _PAGE_SZHUGE);
+#else
+PTE_BIT_FUNC(low, wrprotect, &= ~_PAGE_RW);
+PTE_BIT_FUNC(low, mkwrite, |= _PAGE_RW);
+PTE_BIT_FUNC(low, mkhuge, |= _PAGE_SZHUGE);
+#endif
+
+PTE_BIT_FUNC(low, mkclean, &= ~_PAGE_DIRTY);
+PTE_BIT_FUNC(low, mkdirty, |= _PAGE_DIRTY);
+PTE_BIT_FUNC(low, mkold, &= ~_PAGE_ACCESSED);
+PTE_BIT_FUNC(low, mkyoung, |= _PAGE_ACCESSED);
+
+static inline pte_t pte_mkspecial(pte_t pte) { return pte; }
+
+/*
+ * Macro and implementation to make a page protection as uncachable.
+ */
+#define pgprot_writecombine(prot) \
+	__pgprot(pgprot_val(prot) & ~_PAGE_CACHABLE)
+
+#define pgprot_noncached	 pgprot_writecombine
+
+/*
+ * Conversion functions: convert a page and protection to a page entry,
+ * and a page entry and page directory to the page they refer to.
+ *
+ * extern pte_t mk_pte(struct page *page, pgprot_t pgprot)
+ */
+#define mk_pte(page, pgprot)	pfn_pte(page_to_pfn(page), (pgprot))
+
+static inline pte_t pte_modify(pte_t pte, pgprot_t newprot)
+{
+	pte.pte_low &= _PAGE_CHG_MASK;
+	pte.pte_low |= pgprot_val(newprot);
+
+#ifdef CONFIG_X2TLB
+	pte.pte_high |= pgprot_val(newprot) >> 32;
+#endif
+
+	return pte;
+}
+
+#define pmd_page_vaddr(pmd)	((unsigned long)pmd_val(pmd))
+#define pmd_page(pmd)		(virt_to_page(pmd_val(pmd)))
+
+/* to find an entry in a page-table-directory. */
+#define pgd_index(address)	(((address) >> PGDIR_SHIFT) & (PTRS_PER_PGD-1))
+#define pgd_offset(mm, address)	((mm)->pgd+pgd_index(address))
+
+/* to find an entry in a kernel page-table-directory */
+#define pgd_offset_k(address)	pgd_offset(&init_mm, address)
+
+/* Find an entry in the third-level page table.. */
+#define pte_index(address)	((address >> PAGE_SHIFT) & (PTRS_PER_PTE - 1))
+#define pte_offset_kernel(dir, address) \
+	((pte_t *) pmd_page_vaddr(*(dir)) + pte_index(address))
+#define pte_offset_map(dir, address)		pte_offset_kernel(dir, address)
+#define pte_offset_map_nested(dir, address)	pte_offset_kernel(dir, address)
+
+#define pte_unmap(pte)		do { } while (0)
+#define pte_unmap_nested(pte)	do { } while (0)
+
+#ifdef CONFIG_X2TLB
+#define pte_ERROR(e) \
+	printk("%s:%d: bad pte %p(%08lx%08lx).\n", __FILE__, __LINE__, \
+	       &(e), (e).pte_high, (e).pte_low)
+#define pgd_ERROR(e) \
+	printk("%s:%d: bad pgd %016llx.\n", __FILE__, __LINE__, pgd_val(e))
+#else
+#define pte_ERROR(e) \
+	printk("%s:%d: bad pte %08lx.\n", __FILE__, __LINE__, pte_val(e))
+#define pgd_ERROR(e) \
+	printk("%s:%d: bad pgd %08lx.\n", __FILE__, __LINE__, pgd_val(e))
+#endif
+
+/*
+ * Encode and de-code a swap entry
+ *
+ * Constraints:
+ *	_PAGE_FILE at bit 0
+ *	_PAGE_PRESENT at bit 8
+ *	_PAGE_PROTNONE at bit 9
+ *
+ * For the normal case, we encode the swap type into bits 0:7 and the
+ * swap offset into bits 10:30. For the 64-bit PTE case, we keep the
+ * preserved bits in the low 32-bits and use the upper 32 as the swap
+ * offset (along with a 5-bit type), following the same approach as x86
+ * PAE. This keeps the logic quite simple, and allows for a full 32
+ * PTE_FILE_MAX_BITS, as opposed to the 29-bits we're constrained with
+ * in the pte_low case.
+ *
+ * As is evident by the Alpha code, if we ever get a 64-bit unsigned
+ * long (swp_entry_t) to match up with the 64-bit PTEs, this all becomes
+ * much cleaner..
+ *
+ * NOTE: We should set ZEROs at the position of _PAGE_PRESENT
+ *       and _PAGE_PROTNONE bits
+ */
+#ifdef CONFIG_X2TLB
+#define __swp_type(x)			((x).val & 0x1f)
+#define __swp_offset(x)			((x).val >> 5)
+#define __swp_entry(type, offset)	((swp_entry_t){ (type) | (offset) << 5})
+#define __pte_to_swp_entry(pte)		((swp_entry_t){ (pte).pte_high })
+#define __swp_entry_to_pte(x)		((pte_t){ 0, (x).val })
+
+/*
+ * Encode and decode a nonlinear file mapping entry
+ */
+#define pte_to_pgoff(pte)		((pte).pte_high)
+#define pgoff_to_pte(off)		((pte_t) { _PAGE_FILE, (off) })
+
+#define PTE_FILE_MAX_BITS		32
+#else
+#define __swp_type(x)			((x).val & 0xff)
+#define __swp_offset(x)			((x).val >> 10)
+#define __swp_entry(type, offset)	((swp_entry_t){(type) | (offset) <<10})
+
+#define __pte_to_swp_entry(pte)		((swp_entry_t) { pte_val(pte) >> 1 })
+#define __swp_entry_to_pte(x)		((pte_t) { (x).val << 1 })
+
+/*
+ * Encode and decode a nonlinear file mapping entry
+ */
+#define PTE_FILE_MAX_BITS	29
+#define pte_to_pgoff(pte)	(pte_val(pte) >> 1)
+#define pgoff_to_pte(off)	((pte_t) { ((off) << 1) | _PAGE_FILE })
+#endif
+
+#endif /* __ASSEMBLY__ */
+#endif /* __ASM_SH_PGTABLE_32_H */
diff --git a/include/asm-sh/pgtable_64.h b/arch/sh/include/asm/pgtable_64.h
index c78990cda557..c78990cda557 100644
--- a/include/asm-sh/pgtable_64.h
+++ b/arch/sh/include/asm/pgtable_64.h
diff --git a/include/asm-sh/pm.h b/arch/sh/include/asm/pm.h
index 56fdbd6b1c94..56fdbd6b1c94 100644
--- a/include/asm-sh/pm.h
+++ b/arch/sh/include/asm/pm.h
diff --git a/include/asm-sh/poll.h b/arch/sh/include/asm/poll.h
index c98509d3149e..c98509d3149e 100644
--- a/include/asm-sh/poll.h
+++ b/arch/sh/include/asm/poll.h
diff --git a/include/asm-sh/posix_types.h b/arch/sh/include/asm/posix_types.h
index 4eeb723aee7e..4eeb723aee7e 100644
--- a/include/asm-sh/posix_types.h
+++ b/arch/sh/include/asm/posix_types.h
diff --git a/include/asm-sh/posix_types_32.h b/arch/sh/include/asm/posix_types_32.h
index 0a3d2f54ab27..0a3d2f54ab27 100644
--- a/include/asm-sh/posix_types_32.h
+++ b/arch/sh/include/asm/posix_types_32.h
diff --git a/include/asm-sh/posix_types_64.h b/arch/sh/include/asm/posix_types_64.h
index 0620317a6f0f..0620317a6f0f 100644
--- a/include/asm-sh/posix_types_64.h
+++ b/arch/sh/include/asm/posix_types_64.h
diff --git a/arch/sh/include/asm/processor.h b/arch/sh/include/asm/processor.h
new file mode 100644
index 000000000000..15d9f92ca383
--- /dev/null
+++ b/arch/sh/include/asm/processor.h
@@ -0,0 +1,66 @@
+#ifndef __ASM_SH_PROCESSOR_H
+#define __ASM_SH_PROCESSOR_H
+
+#include <asm/cpu-features.h>
+#include <asm/segment.h>
+
+#ifndef __ASSEMBLY__
+/*
+ *  CPU type and hardware bug flags. Kept separately for each CPU.
+ *
+ *  Each one of these also needs a CONFIG_CPU_SUBTYPE_xxx entry
+ *  in arch/sh/mm/Kconfig, as well as an entry in arch/sh/kernel/setup.c
+ *  for parsing the subtype in get_cpu_subtype().
+ */
+enum cpu_type {
+	/* SH-2 types */
+	CPU_SH7619,
+
+	/* SH-2A types */
+	CPU_SH7203, CPU_SH7206, CPU_SH7263, CPU_MXG,
+
+	/* SH-3 types */
+	CPU_SH7705, CPU_SH7706, CPU_SH7707,
+	CPU_SH7708, CPU_SH7708S, CPU_SH7708R,
+	CPU_SH7709, CPU_SH7709A, CPU_SH7710, CPU_SH7712,
+	CPU_SH7720, CPU_SH7721, CPU_SH7729,
+
+	/* SH-4 types */
+	CPU_SH7750, CPU_SH7750S, CPU_SH7750R, CPU_SH7751, CPU_SH7751R,
+	CPU_SH7760, CPU_SH4_202, CPU_SH4_501,
+
+	/* SH-4A types */
+	CPU_SH7763, CPU_SH7770, CPU_SH7780, CPU_SH7781, CPU_SH7785,
+	CPU_SH7723, CPU_SHX3,
+
+	/* SH4AL-DSP types */
+	CPU_SH7343, CPU_SH7722, CPU_SH7366,
+
+	/* SH-5 types */
+        CPU_SH5_101, CPU_SH5_103,
+
+	/* Unknown subtype */
+	CPU_SH_NONE
+};
+
+/* Forward decl */
+struct sh_cpuinfo;
+
+/* arch/sh/kernel/setup.c */
+const char *get_cpu_subtype(struct sh_cpuinfo *c);
+
+#ifdef CONFIG_VSYSCALL
+int vsyscall_init(void);
+#else
+#define vsyscall_init() do { } while (0)
+#endif
+
+#endif /* __ASSEMBLY__ */
+
+#ifdef CONFIG_SUPERH32
+# include "processor_32.h"
+#else
+# include "processor_64.h"
+#endif
+
+#endif /* __ASM_SH_PROCESSOR_H */
diff --git a/arch/sh/include/asm/processor_32.h b/arch/sh/include/asm/processor_32.h
new file mode 100644
index 000000000000..0dadd75bd93c
--- /dev/null
+++ b/arch/sh/include/asm/processor_32.h
@@ -0,0 +1,216 @@
+/*
+ * include/asm-sh/processor.h
+ *
+ * Copyright (C) 1999, 2000  Niibe Yutaka
+ * Copyright (C) 2002, 2003  Paul Mundt
+ */
+
+#ifndef __ASM_SH_PROCESSOR_32_H
+#define __ASM_SH_PROCESSOR_32_H
+#ifdef __KERNEL__
+
+#include <linux/compiler.h>
+#include <asm/page.h>
+#include <asm/types.h>
+#include <asm/cache.h>
+#include <asm/ptrace.h>
+
+/*
+ * Default implementation of macro that returns current
+ * instruction pointer ("program counter").
+ */
+#define current_text_addr() ({ void *pc; __asm__("mova	1f, %0\n.align 2\n1:":"=z" (pc)); pc; })
+
+/* Core Processor Version Register */
+#define CCN_PVR		0xff000030
+#define CCN_CVR		0xff000040
+#define CCN_PRR		0xff000044
+
+struct sh_cpuinfo {
+	unsigned int type;
+	int cut_major, cut_minor;
+	unsigned long loops_per_jiffy;
+	unsigned long asid_cache;
+
+	struct cache_info icache;	/* Primary I-cache */
+	struct cache_info dcache;	/* Primary D-cache */
+	struct cache_info scache;	/* Secondary cache */
+
+	unsigned long flags;
+} __attribute__ ((aligned(L1_CACHE_BYTES)));
+
+extern struct sh_cpuinfo cpu_data[];
+#define boot_cpu_data cpu_data[0]
+#define current_cpu_data cpu_data[smp_processor_id()]
+#define raw_current_cpu_data cpu_data[raw_smp_processor_id()]
+
+/*
+ * User space process size: 2GB.
+ *
+ * Since SH7709 and SH7750 have "area 7", we can't use 0x7c000000--0x7fffffff
+ */
+#define TASK_SIZE	0x7c000000UL
+
+#define STACK_TOP	TASK_SIZE
+#define STACK_TOP_MAX	STACK_TOP
+
+/* This decides where the kernel will search for a free chunk of vm
+ * space during mmap's.
+ */
+#define TASK_UNMAPPED_BASE	(TASK_SIZE / 3)
+
+/*
+ * Bit of SR register
+ *
+ * FD-bit:
+ *     When it's set, it means the processor doesn't have right to use FPU,
+ *     and it results exception when the floating operation is executed.
+ *
+ * IMASK-bit:
+ *     Interrupt level mask
+ */
+#define SR_DSP		0x00001000
+#define SR_IMASK	0x000000f0
+#define SR_FD		0x00008000
+
+/*
+ * FPU structure and data
+ */
+
+struct sh_fpu_hard_struct {
+	unsigned long fp_regs[16];
+	unsigned long xfp_regs[16];
+	unsigned long fpscr;
+	unsigned long fpul;
+
+	long status; /* software status information */
+};
+
+/* Dummy fpu emulator  */
+struct sh_fpu_soft_struct {
+	unsigned long fp_regs[16];
+	unsigned long xfp_regs[16];
+	unsigned long fpscr;
+	unsigned long fpul;
+
+	unsigned char lookahead;
+	unsigned long entry_pc;
+};
+
+union sh_fpu_union {
+	struct sh_fpu_hard_struct hard;
+	struct sh_fpu_soft_struct soft;
+};
+
+struct thread_struct {
+	/* Saved registers when thread is descheduled */
+	unsigned long sp;
+	unsigned long pc;
+
+	/* Hardware debugging registers */
+	unsigned long ubc_pc;
+
+	/* floating point info */
+	union sh_fpu_union fpu;
+};
+
+/* Count of active tasks with UBC settings */
+extern int ubc_usercnt;
+
+#define INIT_THREAD  {						\
+	.sp = sizeof(init_stack) + (long) &init_stack,		\
+}
+
+/*
+ * Do necessary setup to start up a newly executed thread.
+ */
+#define start_thread(regs, new_pc, new_sp)	 \
+	set_fs(USER_DS);			 \
+	regs->pr = 0;				 \
+	regs->sr = SR_FD;	/* User mode. */ \
+	regs->pc = new_pc;			 \
+	regs->regs[15] = new_sp
+
+/* Forward declaration, a strange C thing */
+struct task_struct;
+struct mm_struct;
+
+/* Free all resources held by a thread. */
+extern void release_thread(struct task_struct *);
+
+/* Prepare to copy thread state - unlazy all lazy status */
+#define prepare_to_copy(tsk)	do { } while (0)
+
+/*
+ * create a kernel thread without removing it from tasklists
+ */
+extern int kernel_thread(int (*fn)(void *), void * arg, unsigned long flags);
+
+/* Copy and release all segment info associated with a VM */
+#define copy_segments(p, mm)	do { } while(0)
+#define release_segments(mm)	do { } while(0)
+
+/*
+ * FPU lazy state save handling.
+ */
+
+static __inline__ void disable_fpu(void)
+{
+	unsigned long __dummy;
+
+	/* Set FD flag in SR */
+	__asm__ __volatile__("stc	sr, %0\n\t"
+			     "or	%1, %0\n\t"
+			     "ldc	%0, sr"
+			     : "=&r" (__dummy)
+			     : "r" (SR_FD));
+}
+
+static __inline__ void enable_fpu(void)
+{
+	unsigned long __dummy;
+
+	/* Clear out FD flag in SR */
+	__asm__ __volatile__("stc	sr, %0\n\t"
+			     "and	%1, %0\n\t"
+			     "ldc	%0, sr"
+			     : "=&r" (__dummy)
+			     : "r" (~SR_FD));
+}
+
+/* Double presision, NANS as NANS, rounding to nearest, no exceptions */
+#define FPSCR_INIT  0x00080000
+
+#define	FPSCR_CAUSE_MASK	0x0001f000	/* Cause bits */
+#define	FPSCR_FLAG_MASK		0x0000007c	/* Flag bits */
+
+/*
+ * Return saved PC of a blocked thread.
+ */
+#define thread_saved_pc(tsk)	(tsk->thread.pc)
+
+void show_trace(struct task_struct *tsk, unsigned long *sp,
+		struct pt_regs *regs);
+extern unsigned long get_wchan(struct task_struct *p);
+
+#define KSTK_EIP(tsk)  (task_pt_regs(tsk)->pc)
+#define KSTK_ESP(tsk)  (task_pt_regs(tsk)->regs[15])
+
+#define cpu_sleep()	__asm__ __volatile__ ("sleep" : : : "memory")
+#define cpu_relax()	barrier()
+
+#if defined(CONFIG_CPU_SH2A) || defined(CONFIG_CPU_SH3) || \
+    defined(CONFIG_CPU_SH4)
+#define PREFETCH_STRIDE		L1_CACHE_BYTES
+#define ARCH_HAS_PREFETCH
+#define ARCH_HAS_PREFETCHW
+static inline void prefetch(void *x)
+{
+	__asm__ __volatile__ ("pref @%0\n\t" : : "r" (x) : "memory");
+}
+
+#define prefetchw(x)	prefetch(x)
+#endif
+
+#endif /* __KERNEL__ */
+#endif /* __ASM_SH_PROCESSOR_32_H */
diff --git a/arch/sh/include/asm/processor_64.h b/arch/sh/include/asm/processor_64.h
new file mode 100644
index 000000000000..770d5169983b
--- /dev/null
+++ b/arch/sh/include/asm/processor_64.h
@@ -0,0 +1,275 @@
+#ifndef __ASM_SH_PROCESSOR_64_H
+#define __ASM_SH_PROCESSOR_64_H
+
+/*
+ * include/asm-sh/processor_64.h
+ *
+ * Copyright (C) 2000, 2001  Paolo Alberelli
+ * Copyright (C) 2003  Paul Mundt
+ * Copyright (C) 2004  Richard Curnow
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#ifndef __ASSEMBLY__
+
+#include <linux/compiler.h>
+#include <asm/page.h>
+#include <asm/types.h>
+#include <asm/cache.h>
+#include <asm/ptrace.h>
+#include <cpu/registers.h>
+
+/*
+ * Default implementation of macro that returns current
+ * instruction pointer ("program counter").
+ */
+#define current_text_addr() ({ \
+void *pc; \
+unsigned long long __dummy = 0; \
+__asm__("gettr	tr0, %1\n\t" \
+	"pta	4, tr0\n\t" \
+	"gettr	tr0, %0\n\t" \
+	"ptabs	%1, tr0\n\t"	\
+	:"=r" (pc), "=r" (__dummy) \
+	: "1" (__dummy)); \
+pc; })
+
+/*
+ * TLB information structure
+ *
+ * Defined for both I and D tlb, per-processor.
+ */
+struct tlb_info {
+	unsigned long long next;
+	unsigned long long first;
+	unsigned long long last;
+
+	unsigned int entries;
+	unsigned int step;
+
+	unsigned long flags;
+};
+
+struct sh_cpuinfo {
+	enum cpu_type type;
+	unsigned long loops_per_jiffy;
+	unsigned long asid_cache;
+
+	unsigned int cpu_clock, master_clock, bus_clock, module_clock;
+
+	/* Cache info */
+	struct cache_info icache;
+	struct cache_info dcache;
+	struct cache_info scache;
+
+	/* TLB info */
+	struct tlb_info itlb;
+	struct tlb_info dtlb;
+
+	unsigned long flags;
+};
+
+extern struct sh_cpuinfo cpu_data[];
+#define boot_cpu_data cpu_data[0]
+#define current_cpu_data cpu_data[smp_processor_id()]
+#define raw_current_cpu_data cpu_data[raw_smp_processor_id()]
+
+#endif
+
+/*
+ * User space process size: 2GB - 4k.
+ */
+#define TASK_SIZE	0x7ffff000UL
+
+#define STACK_TOP	TASK_SIZE
+#define STACK_TOP_MAX	STACK_TOP
+
+/* This decides where the kernel will search for a free chunk of vm
+ * space during mmap's.
+ */
+#define TASK_UNMAPPED_BASE	(TASK_SIZE / 3)
+
+/*
+ * Bit of SR register
+ *
+ * FD-bit:
+ *     When it's set, it means the processor doesn't have right to use FPU,
+ *     and it results exception when the floating operation is executed.
+ *
+ * IMASK-bit:
+ *     Interrupt level mask
+ *
+ * STEP-bit:
+ *     Single step bit
+ *
+ */
+#if defined(CONFIG_SH64_SR_WATCH)
+#define SR_MMU   0x84000000
+#else
+#define SR_MMU   0x80000000
+#endif
+
+#define SR_IMASK 0x000000f0
+#define SR_FD    0x00008000
+#define SR_SSTEP 0x08000000
+
+#ifndef __ASSEMBLY__
+
+/*
+ * FPU structure and data : require 8-byte alignment as we need to access it
+   with fld.p, fst.p
+ */
+
+struct sh_fpu_hard_struct {
+	unsigned long fp_regs[64];
+	unsigned int fpscr;
+	/* long status; * software status information */
+};
+
+#if 0
+/* Dummy fpu emulator  */
+struct sh_fpu_soft_struct {
+	unsigned long long fp_regs[32];
+	unsigned int fpscr;
+	unsigned char lookahead;
+	unsigned long entry_pc;
+};
+#endif
+
+union sh_fpu_union {
+	struct sh_fpu_hard_struct hard;
+	/* 'hard' itself only produces 32 bit alignment, yet we need
+	   to access it using 64 bit load/store as well. */
+	unsigned long long alignment_dummy;
+};
+
+struct thread_struct {
+	unsigned long sp;
+	unsigned long pc;
+	/* This stores the address of the pt_regs built during a context
+	   switch, or of the register save area built for a kernel mode
+	   exception.  It is used for backtracing the stack of a sleeping task
+	   or one that traps in kernel mode. */
+        struct pt_regs *kregs;
+	/* This stores the address of the pt_regs constructed on entry from
+	   user mode.  It is a fixed value over the lifetime of a process, or
+	   NULL for a kernel thread. */
+	struct pt_regs *uregs;
+
+	unsigned long trap_no, error_code;
+	unsigned long address;
+	/* Hardware debugging registers may come here */
+
+	/* floating point info */
+	union sh_fpu_union fpu;
+};
+
+#define INIT_MMAP \
+{ &init_mm, 0, 0, NULL, PAGE_SHARED, VM_READ | VM_WRITE | VM_EXEC, 1, NULL, NULL }
+
+extern  struct pt_regs fake_swapper_regs;
+
+#define INIT_THREAD  {				\
+	.sp		= sizeof(init_stack) +	\
+			  (long) &init_stack,	\
+	.pc		= 0,			\
+        .kregs		= &fake_swapper_regs,	\
+	.uregs	        = NULL,			\
+	.trap_no	= 0,			\
+	.error_code	= 0,			\
+	.address	= 0,			\
+	.fpu		= { { { 0, } }, }	\
+}
+
+/*
+ * Do necessary setup to start up a newly executed thread.
+ */
+#define SR_USER (SR_MMU | SR_FD)
+
+#define start_thread(regs, new_pc, new_sp)			\
+	set_fs(USER_DS);					\
+	regs->sr = SR_USER;	/* User mode. */		\
+	regs->pc = new_pc - 4;	/* Compensate syscall exit */	\
+	regs->pc |= 1;		/* Set SHmedia ! */		\
+	regs->regs[18] = 0;					\
+	regs->regs[15] = new_sp
+
+/* Forward declaration, a strange C thing */
+struct task_struct;
+struct mm_struct;
+
+/* Free all resources held by a thread. */
+extern void release_thread(struct task_struct *);
+/*
+ * create a kernel thread without removing it from tasklists
+ */
+extern int kernel_thread(int (*fn)(void *), void * arg, unsigned long flags);
+
+
+/* Copy and release all segment info associated with a VM */
+#define copy_segments(p, mm)	do { } while (0)
+#define release_segments(mm)	do { } while (0)
+#define forget_segments()	do { } while (0)
+#define prepare_to_copy(tsk)	do { } while (0)
+/*
+ * FPU lazy state save handling.
+ */
+
+static inline void disable_fpu(void)
+{
+	unsigned long long __dummy;
+
+	/* Set FD flag in SR */
+	__asm__ __volatile__("getcon	" __SR ", %0\n\t"
+			     "or	%0, %1, %0\n\t"
+			     "putcon	%0, " __SR "\n\t"
+			     : "=&r" (__dummy)
+			     : "r" (SR_FD));
+}
+
+static inline void enable_fpu(void)
+{
+	unsigned long long __dummy;
+
+	/* Clear out FD flag in SR */
+	__asm__ __volatile__("getcon	" __SR ", %0\n\t"
+			     "and	%0, %1, %0\n\t"
+			     "putcon	%0, " __SR "\n\t"
+			     : "=&r" (__dummy)
+			     : "r" (~SR_FD));
+}
+
+/* Round to nearest, no exceptions on inexact, overflow, underflow,
+   zero-divide, invalid.  Configure option for whether to flush denorms to
+   zero, or except if a denorm is encountered.  */
+#if defined(CONFIG_SH64_FPU_DENORM_FLUSH)
+#define FPSCR_INIT  0x00040000
+#else
+#define FPSCR_INIT  0x00000000
+#endif
+
+#ifdef CONFIG_SH_FPU
+/* Initialise the FP state of a task */
+void fpinit(struct sh_fpu_hard_struct *fpregs);
+#else
+#define fpinit(fpregs)	do { } while (0)
+#endif
+
+extern struct task_struct *last_task_used_math;
+
+/*
+ * Return saved PC of a blocked thread.
+ */
+#define thread_saved_pc(tsk)	(tsk->thread.pc)
+
+extern unsigned long get_wchan(struct task_struct *p);
+
+#define KSTK_EIP(tsk)  ((tsk)->thread.pc)
+#define KSTK_ESP(tsk)  ((tsk)->thread.sp)
+
+#define cpu_relax()	barrier()
+
+#endif	/* __ASSEMBLY__ */
+#endif /* __ASM_SH_PROCESSOR_64_H */
diff --git a/arch/sh/include/asm/ptrace.h b/arch/sh/include/asm/ptrace.h
new file mode 100644
index 000000000000..b86aeabba61a
--- /dev/null
+++ b/arch/sh/include/asm/ptrace.h
@@ -0,0 +1,139 @@
+#ifndef __ASM_SH_PTRACE_H
+#define __ASM_SH_PTRACE_H
+
+/*
+ * Copyright (C) 1999, 2000  Niibe Yutaka
+ *
+ */
+#if defined(__SH5__)
+struct pt_regs {
+	unsigned long long pc;
+	unsigned long long sr;
+	unsigned long long syscall_nr;
+	unsigned long long regs[63];
+	unsigned long long tregs[8];
+	unsigned long long pad[2];
+};
+#else
+/*
+ * GCC defines register number like this:
+ * -----------------------------
+ *	 0 - 15 are integer registers
+ *	17 - 22 are control/special registers
+ *	24 - 39 fp registers
+ *	40 - 47 xd registers
+ *	48 -    fpscr register
+ * -----------------------------
+ *
+ * We follows above, except:
+ *	16 --- program counter (PC)
+ *	22 --- syscall #
+ *	23 --- floating point communication register
+ */
+#define REG_REG0	 0
+#define REG_REG15	15
+
+#define REG_PC		16
+
+#define REG_PR		17
+#define REG_SR		18
+#define REG_GBR		19
+#define REG_MACH	20
+#define REG_MACL	21
+
+#define REG_SYSCALL	22
+
+#define REG_FPREG0	23
+#define REG_FPREG15	38
+#define REG_XFREG0	39
+#define REG_XFREG15	54
+
+#define REG_FPSCR	55
+#define REG_FPUL	56
+
+/*
+ * This struct defines the way the registers are stored on the
+ * kernel stack during a system call or other kernel entry.
+ */
+struct pt_regs {
+	unsigned long regs[16];
+	unsigned long pc;
+	unsigned long pr;
+	unsigned long sr;
+	unsigned long gbr;
+	unsigned long mach;
+	unsigned long macl;
+	long tra;
+};
+
+/*
+ * This struct defines the way the DSP registers are stored on the
+ * kernel stack during a system call or other kernel entry.
+ */
+struct pt_dspregs {
+	unsigned long	a1;
+	unsigned long	a0g;
+	unsigned long	a1g;
+	unsigned long	m0;
+	unsigned long	m1;
+	unsigned long	a0;
+	unsigned long	x0;
+	unsigned long	x1;
+	unsigned long	y0;
+	unsigned long	y1;
+	unsigned long	dsr;
+	unsigned long	rs;
+	unsigned long	re;
+	unsigned long	mod;
+};
+
+#define PTRACE_GETFDPIC		31	/* get the ELF fdpic loadmap address */
+
+#define PTRACE_GETFDPIC_EXEC	0	/* [addr] request the executable loadmap */
+#define PTRACE_GETFDPIC_INTERP	1	/* [addr] request the interpreter loadmap */
+
+#define	PTRACE_GETDSPREGS	55
+#define	PTRACE_SETDSPREGS	56
+#endif
+
+#ifdef __KERNEL__
+#include <asm/addrspace.h>
+
+#define user_mode(regs)			(((regs)->sr & 0x40000000)==0)
+#define instruction_pointer(regs)	((unsigned long)(regs)->pc)
+
+extern void show_regs(struct pt_regs *);
+
+/*
+ * These are defined as per linux/ptrace.h.
+ */
+struct task_struct;
+
+#define arch_has_single_step()	(1)
+extern void user_enable_single_step(struct task_struct *);
+extern void user_disable_single_step(struct task_struct *);
+
+#ifdef CONFIG_SH_DSP
+#define task_pt_regs(task) \
+	((struct pt_regs *) (task_stack_page(task) + THREAD_SIZE \
+		 - sizeof(struct pt_dspregs) - sizeof(unsigned long)) - 1)
+#else
+#define task_pt_regs(task) \
+	((struct pt_regs *) (task_stack_page(task) + THREAD_SIZE \
+		 - sizeof(unsigned long)) - 1)
+#endif
+
+static inline unsigned long profile_pc(struct pt_regs *regs)
+{
+	unsigned long pc = instruction_pointer(regs);
+
+#ifdef P2SEG
+	if (pc >= P2SEG && pc < P3SEG)
+		pc -= 0x20000000;
+#endif
+
+	return pc;
+}
+#endif /* __KERNEL__ */
+
+#endif /* __ASM_SH_PTRACE_H */
diff --git a/include/asm-sh/push-switch.h b/arch/sh/include/asm/push-switch.h
index 4903f9e52dd8..4903f9e52dd8 100644
--- a/include/asm-sh/push-switch.h
+++ b/arch/sh/include/asm/push-switch.h
diff --git a/include/asm-sh/r7780rp.h b/arch/sh/include/asm/r7780rp.h
index 306f7359f7d4..306f7359f7d4 100644
--- a/include/asm-sh/r7780rp.h
+++ b/arch/sh/include/asm/r7780rp.h
diff --git a/include/asm-sh/resource.h b/arch/sh/include/asm/resource.h
index 9c2499a86ec0..9c2499a86ec0 100644
--- a/include/asm-sh/resource.h
+++ b/arch/sh/include/asm/resource.h
diff --git a/arch/sh/include/asm/rtc.h b/arch/sh/include/asm/rtc.h
new file mode 100644
index 000000000000..1813f4202a24
--- /dev/null
+++ b/arch/sh/include/asm/rtc.h
@@ -0,0 +1,16 @@
+#ifndef _ASM_RTC_H
+#define _ASM_RTC_H
+
+extern void (*board_time_init)(void);
+extern void (*rtc_sh_get_time)(struct timespec *);
+extern int (*rtc_sh_set_time)(const time_t);
+
+#define RTC_CAP_4_DIGIT_YEAR	(1 << 0)
+
+struct sh_rtc_platform_info {
+	unsigned long capabilities;
+};
+
+#include <cpu/rtc.h>
+
+#endif /* _ASM_RTC_H */
diff --git a/include/asm-sh/rts7751r2d.h b/arch/sh/include/asm/rts7751r2d.h
index 0a800157b826..0a800157b826 100644
--- a/include/asm-sh/rts7751r2d.h
+++ b/arch/sh/include/asm/rts7751r2d.h
diff --git a/include/asm-sh/rwsem.h b/arch/sh/include/asm/rwsem.h
index 1987f3ea7f1b..1987f3ea7f1b 100644
--- a/include/asm-sh/rwsem.h
+++ b/arch/sh/include/asm/rwsem.h
diff --git a/include/asm-sh/scatterlist.h b/arch/sh/include/asm/scatterlist.h
index 2084d0373693..2084d0373693 100644
--- a/include/asm-sh/scatterlist.h
+++ b/arch/sh/include/asm/scatterlist.h
diff --git a/include/asm-sh/sdk7780.h b/arch/sh/include/asm/sdk7780.h
index 697dc865f21b..697dc865f21b 100644
--- a/include/asm-sh/sdk7780.h
+++ b/arch/sh/include/asm/sdk7780.h
diff --git a/arch/sh/include/asm/seccomp.h b/arch/sh/include/asm/seccomp.h
new file mode 100644
index 000000000000..3280ed3802ef
--- /dev/null
+++ b/arch/sh/include/asm/seccomp.h
@@ -0,0 +1,10 @@
+#ifndef __ASM_SECCOMP_H
+
+#include <linux/unistd.h>
+
+#define __NR_seccomp_read __NR_read
+#define __NR_seccomp_write __NR_write
+#define __NR_seccomp_exit __NR_exit
+#define __NR_seccomp_sigreturn __NR_rt_sigreturn
+
+#endif /* __ASM_SECCOMP_H */
diff --git a/include/asm-sh/sections.h b/arch/sh/include/asm/sections.h
index 8f8f4ad400df..8f8f4ad400df 100644
--- a/include/asm-sh/sections.h
+++ b/arch/sh/include/asm/sections.h
diff --git a/arch/sh/include/asm/segment.h b/arch/sh/include/asm/segment.h
new file mode 100644
index 000000000000..5e2725f4ac49
--- /dev/null
+++ b/arch/sh/include/asm/segment.h
@@ -0,0 +1,34 @@
+#ifndef __ASM_SH_SEGMENT_H
+#define __ASM_SH_SEGMENT_H
+
+#ifndef __ASSEMBLY__
+
+typedef struct {
+	unsigned long seg;
+} mm_segment_t;
+
+#define MAKE_MM_SEG(s)	((mm_segment_t) { (s) })
+
+/*
+ * The fs value determines whether argument validity checking should be
+ * performed or not.  If get_fs() == USER_DS, checking is performed, with
+ * get_fs() == KERNEL_DS, checking is bypassed.
+ *
+ * For historical reasons, these macros are grossly misnamed.
+ */
+#define KERNEL_DS	MAKE_MM_SEG(0xFFFFFFFFUL)
+#ifdef CONFIG_MMU
+#define USER_DS		MAKE_MM_SEG(PAGE_OFFSET)
+#else
+#define USER_DS		KERNEL_DS
+#endif
+
+#define segment_eq(a,b)	((a).seg == (b).seg)
+
+#define get_ds()	(KERNEL_DS)
+
+#define get_fs()	(current_thread_info()->addr_limit)
+#define set_fs(x)	(current_thread_info()->addr_limit = (x))
+
+#endif /* __ASSEMBLY__ */
+#endif /* __ASM_SH_SEGMENT_H */
diff --git a/include/asm-sh/sembuf.h b/arch/sh/include/asm/sembuf.h
index d79f3bd570b2..d79f3bd570b2 100644
--- a/include/asm-sh/sembuf.h
+++ b/arch/sh/include/asm/sembuf.h
diff --git a/arch/sh/include/asm/serial.h b/arch/sh/include/asm/serial.h
new file mode 100644
index 000000000000..e13cc948ee60
--- /dev/null
+++ b/arch/sh/include/asm/serial.h
@@ -0,0 +1,36 @@
+/*
+ * include/asm-sh/serial.h
+ *
+ * Configuration details for 8250, 16450, 16550, etc. serial ports
+ */
+
+#ifndef _ASM_SERIAL_H
+#define _ASM_SERIAL_H
+
+#include <linux/kernel.h>
+
+/*
+ * This assumes you have a 1.8432 MHz clock for your UART.
+ *
+ * It'd be nice if someone built a serial card with a 24.576 MHz
+ * clock, since the 16550A is capable of handling a top speed of 1.5
+ * megabits/second; but this requires the faster clock.
+ */
+#define BASE_BAUD ( 1843200 / 16 )
+
+#define STD_COM_FLAGS (ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST)
+
+#ifdef CONFIG_HD64465
+#include <asm/hd64465/hd64465.h>
+
+#define SERIAL_PORT_DFNS                   \
+        /* UART CLK   PORT IRQ     FLAGS        */                      \
+        { 0, BASE_BAUD, 0x3F8, HD64465_IRQ_UART, STD_COM_FLAGS }  /* ttyS0 */
+
+#else
+
+#define SERIAL_PORT_DFNS
+
+#endif
+
+#endif /* _ASM_SERIAL_H */
diff --git a/include/asm-sh/setup.h b/arch/sh/include/asm/setup.h
index 55a2bd328d99..55a2bd328d99 100644
--- a/include/asm-sh/setup.h
+++ b/arch/sh/include/asm/setup.h
diff --git a/include/asm-sh/sfp-machine.h b/arch/sh/include/asm/sfp-machine.h
index d3c548443f2a..d3c548443f2a 100644
--- a/include/asm-sh/sfp-machine.h
+++ b/arch/sh/include/asm/sfp-machine.h
diff --git a/include/asm-sh/sh7760fb.h b/arch/sh/include/asm/sh7760fb.h
index 8767f61aceca..8767f61aceca 100644
--- a/include/asm-sh/sh7760fb.h
+++ b/arch/sh/include/asm/sh7760fb.h
diff --git a/arch/sh/include/asm/sh7763rdp.h b/arch/sh/include/asm/sh7763rdp.h
new file mode 100644
index 000000000000..8750cc852977
--- /dev/null
+++ b/arch/sh/include/asm/sh7763rdp.h
@@ -0,0 +1,54 @@
+#ifndef __ASM_SH_SH7763RDP_H
+#define __ASM_SH_SH7763RDP_H
+
+/*
+ * linux/include/asm-sh/sh7763drp.h
+ *
+ * Copyright (C) 2008 Renesas Solutions
+ * Copyright (C) 2008 Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ */
+#include <asm/addrspace.h>
+
+/* clock control */
+#define MSTPCR1 0xFFC80038
+
+/* PORT */
+#define PORT_PSEL0	0xFFEF0070
+#define PORT_PSEL1	0xFFEF0072
+#define PORT_PSEL2	0xFFEF0074
+#define PORT_PSEL3	0xFFEF0076
+#define PORT_PSEL4	0xFFEF0078
+
+#define PORT_PACR	0xFFEF0000
+#define PORT_PCCR	0xFFEF0004
+#define PORT_PFCR	0xFFEF000A
+#define PORT_PGCR	0xFFEF000C
+#define PORT_PHCR	0xFFEF000E
+#define PORT_PICR	0xFFEF0010
+#define PORT_PJCR	0xFFEF0012
+#define PORT_PKCR	0xFFEF0014
+#define PORT_PLCR	0xFFEF0016
+#define PORT_PMCR	0xFFEF0018
+#define PORT_PNCR	0xFFEF001A
+
+/* FPGA */
+#define CPLD_BOARD_ID_ERV_REG	0xB1000000
+#define CPLD_CPLD_CMD_REG		0xB1000006
+
+/*
+ * USB SH7763RDP board can use Host only.
+ */
+#define USB_USBHSC	0xFFEC80f0
+
+/* arch/sh/boards/renesas/sh7763rdp/irq.c */
+void init_sh7763rdp_IRQ(void);
+int sh7763rdp_irq_demux(int irq);
+#define __IO_PREFIX	sh7763rdp
+#include <asm/io_generic.h>
+
+#endif /* __ASM_SH_SH7763RDP_H */
diff --git a/arch/sh/include/asm/sh7785lcr.h b/arch/sh/include/asm/sh7785lcr.h
new file mode 100644
index 000000000000..1ce27d5c7491
--- /dev/null
+++ b/arch/sh/include/asm/sh7785lcr.h
@@ -0,0 +1,55 @@
+#ifndef __ASM_SH_RENESAS_SH7785LCR_H
+#define __ASM_SH_RENESAS_SH7785LCR_H
+
+/*
+ * This board has 2 physical memory maps.
+ * It can be changed with DIP switch(S2-5).
+ *
+ * phys address			| S2-5 = OFF	| S2-5 = ON
+ * -----------------------------+---------------+---------------
+ * 0x00000000 - 0x03ffffff(CS0)	| NOR Flash	| NOR Flash
+ * 0x04000000 - 0x05ffffff(CS1)	| PLD		| PLD
+ * 0x06000000 - 0x07ffffff(CS1)	| reserved	| I2C
+ * 0x08000000 - 0x0bffffff(CS2)	| USB		| DDR SDRAM
+ * 0x0c000000 - 0x0fffffff(CS3)	| SD		| DDR SDRAM
+ * 0x10000000 - 0x13ffffff(CS4)	| SM107		| SM107
+ * 0x14000000 - 0x17ffffff(CS5)	| I2C		| USB
+ * 0x18000000 - 0x1bffffff(CS6)	| reserved	| SD
+ * 0x40000000 - 0x5fffffff	| DDR SDRAM	| (cannot use)
+ *
+ */
+
+#define NOR_FLASH_ADDR		0x00000000
+#define NOR_FLASH_SIZE		0x04000000
+
+#define PLD_BASE_ADDR		0x04000000
+#define PLD_PCICR		(PLD_BASE_ADDR + 0x00)
+#define PLD_LCD_BK_CONTR	(PLD_BASE_ADDR + 0x02)
+#define PLD_LOCALCR		(PLD_BASE_ADDR + 0x04)
+#define PLD_POFCR		(PLD_BASE_ADDR + 0x06)
+#define PLD_LEDCR		(PLD_BASE_ADDR + 0x08)
+#define PLD_SWSR		(PLD_BASE_ADDR + 0x0a)
+#define PLD_VERSR		(PLD_BASE_ADDR + 0x0c)
+#define PLD_MMSR		(PLD_BASE_ADDR + 0x0e)
+
+#define SM107_MEM_ADDR		0x10000000
+#define SM107_MEM_SIZE		0x00e00000
+#define SM107_REG_ADDR		0x13e00000
+#define SM107_REG_SIZE		0x00200000
+
+#if defined(CONFIG_SH_SH7785LCR_29BIT_PHYSMAPS)
+#define R8A66597_ADDR		0x14000000	/* USB */
+#define CG200_ADDR		0x18000000	/* SD */
+#define PCA9564_ADDR		0x06000000	/* I2C */
+#else
+#define R8A66597_ADDR		0x08000000
+#define CG200_ADDR		0x0c000000
+#define PCA9564_ADDR		0x14000000
+#endif
+
+#define R8A66597_SIZE		0x00000100
+#define CG200_SIZE		0x00010000
+#define PCA9564_SIZE		0x00000100
+
+#endif  /* __ASM_SH_RENESAS_SH7785LCR_H */
+
diff --git a/include/asm-sh/sh_bios.h b/arch/sh/include/asm/sh_bios.h
index 0ca261956e3d..0ca261956e3d 100644
--- a/include/asm-sh/sh_bios.h
+++ b/arch/sh/include/asm/sh_bios.h
diff --git a/arch/sh/include/asm/sh_eth.h b/arch/sh/include/asm/sh_eth.h
new file mode 100644
index 000000000000..bb832584f3c1
--- /dev/null
+++ b/arch/sh/include/asm/sh_eth.h
@@ -0,0 +1,11 @@
+#ifndef __ASM_SH_ETH_H__
+#define __ASM_SH_ETH_H__
+
+enum {EDMAC_LITTLE_ENDIAN, EDMAC_BIG_ENDIAN};
+
+struct sh_eth_plat_data {
+	int phy;
+	int edmac_endian;
+};
+
+#endif
diff --git a/include/asm-sh/sh_keysc.h b/arch/sh/include/asm/sh_keysc.h
index b5a4dd5a9729..b5a4dd5a9729 100644
--- a/include/asm-sh/sh_keysc.h
+++ b/arch/sh/include/asm/sh_keysc.h
diff --git a/include/asm-sh/sh_mobile_lcdc.h b/arch/sh/include/asm/sh_mobile_lcdc.h
index 27677727df4d..130102f663f5 100644
--- a/include/asm-sh/sh_mobile_lcdc.h
+++ b/arch/sh/include/asm/sh_mobile_lcdc.h
@@ -47,12 +47,18 @@ struct sh_mobile_lcdc_board_cfg {
 	void (*display_off)(void *board_data);
 };
 
+struct sh_mobile_lcdc_lcd_size_cfg { /* width and height of panel in mm */
+	unsigned long width;
+	unsigned long height;
+};
+
 struct sh_mobile_lcdc_chan_cfg {
 	int chan;
 	int bpp;
 	int interface_type; /* selects RGBn or SYSn I/F, see above */
 	int clock_divider;
 	struct fb_videomode lcd_cfg;
+	struct sh_mobile_lcdc_lcd_size_cfg lcd_size_cfg;
 	struct sh_mobile_lcdc_board_cfg board_cfg;
 	struct sh_mobile_lcdc_sys_bus_cfg sys_bus_cfg; /* only for SYSn I/F */
 };
diff --git a/include/asm-sh/shmbuf.h b/arch/sh/include/asm/shmbuf.h
index b2101f490521..b2101f490521 100644
--- a/include/asm-sh/shmbuf.h
+++ b/arch/sh/include/asm/shmbuf.h
diff --git a/include/asm-sh/shmin.h b/arch/sh/include/asm/shmin.h
index 36ba138a81fb..36ba138a81fb 100644
--- a/include/asm-sh/shmin.h
+++ b/arch/sh/include/asm/shmin.h
diff --git a/include/asm-sh/shmparam.h b/arch/sh/include/asm/shmparam.h
index ba1758d90106..ba1758d90106 100644
--- a/include/asm-sh/shmparam.h
+++ b/arch/sh/include/asm/shmparam.h
diff --git a/include/asm-sh/sigcontext.h b/arch/sh/include/asm/sigcontext.h
index 8ce1435bc0bf..8ce1435bc0bf 100644
--- a/include/asm-sh/sigcontext.h
+++ b/arch/sh/include/asm/sigcontext.h
diff --git a/include/asm-sh/siginfo.h b/arch/sh/include/asm/siginfo.h
index 813040ed68a9..813040ed68a9 100644
--- a/include/asm-sh/siginfo.h
+++ b/arch/sh/include/asm/siginfo.h
diff --git a/include/asm-sh/signal.h b/arch/sh/include/asm/signal.h
index 5c5c1e852089..5c5c1e852089 100644
--- a/include/asm-sh/signal.h
+++ b/arch/sh/include/asm/signal.h
diff --git a/include/asm-sh/smc37c93x.h b/arch/sh/include/asm/smc37c93x.h
index 585da2a8fc45..585da2a8fc45 100644
--- a/include/asm-sh/smc37c93x.h
+++ b/arch/sh/include/asm/smc37c93x.h
diff --git a/include/asm-sh/smp.h b/arch/sh/include/asm/smp.h
index 593343cd26ee..593343cd26ee 100644
--- a/include/asm-sh/smp.h
+++ b/arch/sh/include/asm/smp.h
diff --git a/include/asm-sh/snapgear.h b/arch/sh/include/asm/snapgear.h
index 042d95f51c4d..042d95f51c4d 100644
--- a/include/asm-sh/snapgear.h
+++ b/arch/sh/include/asm/snapgear.h
diff --git a/include/asm-sh/socket.h b/arch/sh/include/asm/socket.h
index 6d4bf6512959..6d4bf6512959 100644
--- a/include/asm-sh/socket.h
+++ b/arch/sh/include/asm/socket.h
diff --git a/include/asm-sh/sockios.h b/arch/sh/include/asm/sockios.h
index cf8b96b1f9ab..cf8b96b1f9ab 100644
--- a/include/asm-sh/sockios.h
+++ b/arch/sh/include/asm/sockios.h
diff --git a/include/asm-sh/sparsemem.h b/arch/sh/include/asm/sparsemem.h
index 547a540b6667..547a540b6667 100644
--- a/include/asm-sh/sparsemem.h
+++ b/arch/sh/include/asm/sparsemem.h
diff --git a/include/asm-sh/spi.h b/arch/sh/include/asm/spi.h
index e96f5b0953c8..e96f5b0953c8 100644
--- a/include/asm-sh/spi.h
+++ b/arch/sh/include/asm/spi.h
diff --git a/include/asm-sh/spinlock.h b/arch/sh/include/asm/spinlock.h
index e793181d64da..e793181d64da 100644
--- a/include/asm-sh/spinlock.h
+++ b/arch/sh/include/asm/spinlock.h
diff --git a/include/asm-sh/spinlock_types.h b/arch/sh/include/asm/spinlock_types.h
index b4d244e7b60c..b4d244e7b60c 100644
--- a/include/asm-sh/spinlock_types.h
+++ b/arch/sh/include/asm/spinlock_types.h
diff --git a/include/asm-sh/stat.h b/arch/sh/include/asm/stat.h
index e1810cc6e3da..e1810cc6e3da 100644
--- a/include/asm-sh/stat.h
+++ b/arch/sh/include/asm/stat.h
diff --git a/include/asm-sh/statfs.h b/arch/sh/include/asm/statfs.h
index 9202a023328f..9202a023328f 100644
--- a/include/asm-sh/statfs.h
+++ b/arch/sh/include/asm/statfs.h
diff --git a/include/asm-sh/string.h b/arch/sh/include/asm/string.h
index 8c1ea21dc0ae..8c1ea21dc0ae 100644
--- a/include/asm-sh/string.h
+++ b/arch/sh/include/asm/string.h
diff --git a/include/asm-sh/string_32.h b/arch/sh/include/asm/string_32.h
index 55f8db6bc1d7..55f8db6bc1d7 100644
--- a/include/asm-sh/string_32.h
+++ b/arch/sh/include/asm/string_32.h
diff --git a/include/asm-sh/string_64.h b/arch/sh/include/asm/string_64.h
index aa1fef229c78..aa1fef229c78 100644
--- a/include/asm-sh/string_64.h
+++ b/arch/sh/include/asm/string_64.h
diff --git a/arch/sh/include/asm/system.h b/arch/sh/include/asm/system.h
new file mode 100644
index 000000000000..056d68cd2108
--- /dev/null
+++ b/arch/sh/include/asm/system.h
@@ -0,0 +1,190 @@
+#ifndef __ASM_SH_SYSTEM_H
+#define __ASM_SH_SYSTEM_H
+
+/*
+ * Copyright (C) 1999, 2000  Niibe Yutaka  &  Kaz Kojima
+ * Copyright (C) 2002 Paul Mundt
+ */
+
+#include <linux/irqflags.h>
+#include <linux/compiler.h>
+#include <linux/linkage.h>
+#include <asm/types.h>
+#include <asm/ptrace.h>
+
+#define AT_VECTOR_SIZE_ARCH 5 /* entries in ARCH_DLINFO */
+
+#if defined(CONFIG_CPU_SH4A) || defined(CONFIG_CPU_SH5)
+#define __icbi()			\
+{					\
+	unsigned long __addr;		\
+	__addr = 0xa8000000;		\
+	__asm__ __volatile__(		\
+		"icbi   %0\n\t"		\
+		: /* no output */	\
+		: "m" (__m(__addr)));	\
+}
+#endif
+
+/*
+ * A brief note on ctrl_barrier(), the control register write barrier.
+ *
+ * Legacy SH cores typically require a sequence of 8 nops after
+ * modification of a control register in order for the changes to take
+ * effect. On newer cores (like the sh4a and sh5) this is accomplished
+ * with icbi.
+ *
+ * Also note that on sh4a in the icbi case we can forego a synco for the
+ * write barrier, as it's not necessary for control registers.
+ *
+ * Historically we have only done this type of barrier for the MMUCR, but
+ * it's also necessary for the CCR, so we make it generic here instead.
+ */
+#if defined(CONFIG_CPU_SH4A) || defined(CONFIG_CPU_SH5)
+#define mb()		__asm__ __volatile__ ("synco": : :"memory")
+#define rmb()		mb()
+#define wmb()		__asm__ __volatile__ ("synco": : :"memory")
+#define ctrl_barrier()	__icbi()
+#define read_barrier_depends()	do { } while(0)
+#else
+#define mb()		__asm__ __volatile__ ("": : :"memory")
+#define rmb()		mb()
+#define wmb()		__asm__ __volatile__ ("": : :"memory")
+#define ctrl_barrier()	__asm__ __volatile__ ("nop;nop;nop;nop;nop;nop;nop;nop")
+#define read_barrier_depends()	do { } while(0)
+#endif
+
+#ifdef CONFIG_SMP
+#define smp_mb()	mb()
+#define smp_rmb()	rmb()
+#define smp_wmb()	wmb()
+#define smp_read_barrier_depends()	read_barrier_depends()
+#else
+#define smp_mb()	barrier()
+#define smp_rmb()	barrier()
+#define smp_wmb()	barrier()
+#define smp_read_barrier_depends()	do { } while(0)
+#endif
+
+#define set_mb(var, value) do { (void)xchg(&var, value); } while (0)
+
+#ifdef CONFIG_GUSA_RB
+#include <asm/cmpxchg-grb.h>
+#else
+#include <asm/cmpxchg-irq.h>
+#endif
+
+extern void __xchg_called_with_bad_pointer(void);
+
+#define __xchg(ptr, x, size)				\
+({							\
+	unsigned long __xchg__res;			\
+	volatile void *__xchg_ptr = (ptr);		\
+	switch (size) {					\
+	case 4:						\
+		__xchg__res = xchg_u32(__xchg_ptr, x);	\
+		break;					\
+	case 1:						\
+		__xchg__res = xchg_u8(__xchg_ptr, x);	\
+		break;					\
+	default:					\
+		__xchg_called_with_bad_pointer();	\
+		__xchg__res = x;			\
+		break;					\
+	}						\
+							\
+	__xchg__res;					\
+})
+
+#define xchg(ptr,x)	\
+	((__typeof__(*(ptr)))__xchg((ptr),(unsigned long)(x), sizeof(*(ptr))))
+
+/* This function doesn't exist, so you'll get a linker error
+ * if something tries to do an invalid cmpxchg(). */
+extern void __cmpxchg_called_with_bad_pointer(void);
+
+#define __HAVE_ARCH_CMPXCHG 1
+
+static inline unsigned long __cmpxchg(volatile void * ptr, unsigned long old,
+		unsigned long new, int size)
+{
+	switch (size) {
+	case 4:
+		return __cmpxchg_u32(ptr, old, new);
+	}
+	__cmpxchg_called_with_bad_pointer();
+	return old;
+}
+
+#define cmpxchg(ptr,o,n)						 \
+  ({									 \
+     __typeof__(*(ptr)) _o_ = (o);					 \
+     __typeof__(*(ptr)) _n_ = (n);					 \
+     (__typeof__(*(ptr))) __cmpxchg((ptr), (unsigned long)_o_,		 \
+				    (unsigned long)_n_, sizeof(*(ptr))); \
+  })
+
+extern void die(const char *str, struct pt_regs *regs, long err) __attribute__ ((noreturn));
+
+extern void *set_exception_table_vec(unsigned int vec, void *handler);
+
+static inline void *set_exception_table_evt(unsigned int evt, void *handler)
+{
+	return set_exception_table_vec(evt >> 5, handler);
+}
+
+/*
+ * SH-2A has both 16 and 32-bit opcodes, do lame encoding checks.
+ */
+#ifdef CONFIG_CPU_SH2A
+extern unsigned int instruction_size(unsigned int insn);
+#elif defined(CONFIG_SUPERH32)
+#define instruction_size(insn)	(2)
+#else
+#define instruction_size(insn)	(4)
+#endif
+
+extern unsigned long cached_to_uncached;
+
+extern struct dentry *sh_debugfs_root;
+
+void per_cpu_trap_init(void);
+
+asmlinkage void break_point_trap(void);
+
+#ifdef CONFIG_SUPERH32
+#define BUILD_TRAP_HANDLER(name)					\
+asmlinkage void name##_trap_handler(unsigned long r4, unsigned long r5,	\
+				    unsigned long r6, unsigned long r7,	\
+				    struct pt_regs __regs)
+
+#define TRAP_HANDLER_DECL				\
+	struct pt_regs *regs = RELOC_HIDE(&__regs, 0);	\
+	unsigned int vec = regs->tra;			\
+	(void)vec;
+#else
+#define BUILD_TRAP_HANDLER(name)	\
+asmlinkage void name##_trap_handler(unsigned int vec, struct pt_regs *regs)
+#define TRAP_HANDLER_DECL
+#endif
+
+BUILD_TRAP_HANDLER(address_error);
+BUILD_TRAP_HANDLER(debug);
+BUILD_TRAP_HANDLER(bug);
+BUILD_TRAP_HANDLER(fpu_error);
+BUILD_TRAP_HANDLER(fpu_state_restore);
+
+#define arch_align_stack(x) (x)
+
+struct mem_access {
+	unsigned long (*from)(void *dst, const void *src, unsigned long cnt);
+	unsigned long (*to)(void *dst, const void *src, unsigned long cnt);
+};
+
+#ifdef CONFIG_SUPERH32
+# include "system_32.h"
+#else
+# include "system_64.h"
+#endif
+
+#endif
diff --git a/include/asm-sh/system_32.h b/arch/sh/include/asm/system_32.h
index f11bcf0855ed..f11bcf0855ed 100644
--- a/include/asm-sh/system_32.h
+++ b/arch/sh/include/asm/system_32.h
diff --git a/include/asm-sh/system_64.h b/arch/sh/include/asm/system_64.h
index 943acf5ea07c..943acf5ea07c 100644
--- a/include/asm-sh/system_64.h
+++ b/arch/sh/include/asm/system_64.h
diff --git a/include/asm-sh/systemh7751.h b/arch/sh/include/asm/systemh7751.h
index 4161122c84ef..4161122c84ef 100644
--- a/include/asm-sh/systemh7751.h
+++ b/arch/sh/include/asm/systemh7751.h
diff --git a/include/asm-sh/termbits.h b/arch/sh/include/asm/termbits.h
index 77db116948cf..77db116948cf 100644
--- a/include/asm-sh/termbits.h
+++ b/arch/sh/include/asm/termbits.h
diff --git a/include/asm-sh/termios.h b/arch/sh/include/asm/termios.h
index 0a8c793c76f2..0a8c793c76f2 100644
--- a/include/asm-sh/termios.h
+++ b/arch/sh/include/asm/termios.h
diff --git a/arch/sh/include/asm/thread_info.h b/arch/sh/include/asm/thread_info.h
new file mode 100644
index 000000000000..0a894cafb1dd
--- /dev/null
+++ b/arch/sh/include/asm/thread_info.h
@@ -0,0 +1,162 @@
+#ifndef __ASM_SH_THREAD_INFO_H
+#define __ASM_SH_THREAD_INFO_H
+
+/* SuperH version
+ * Copyright (C) 2002  Niibe Yutaka
+ *
+ * The copyright of original i386 version is:
+ *
+ *  Copyright (C) 2002  David Howells (dhowells@redhat.com)
+ *  - Incorporating suggestions made by Linus Torvalds and Dave Miller
+ */
+#ifdef __KERNEL__
+#include <asm/page.h>
+
+#ifndef __ASSEMBLY__
+#include <asm/processor.h>
+
+struct thread_info {
+	struct task_struct	*task;		/* main task structure */
+	struct exec_domain	*exec_domain;	/* execution domain */
+	unsigned long		flags;		/* low level flags */
+	__u32			cpu;
+	int			preempt_count; /* 0 => preemptable, <0 => BUG */
+	mm_segment_t		addr_limit;	/* thread address space */
+	struct restart_block	restart_block;
+	unsigned long		previous_sp;	/* sp of previous stack in case
+						   of nested IRQ stacks */
+	__u8			supervisor_stack[0];
+};
+
+#endif
+
+#define PREEMPT_ACTIVE		0x10000000
+
+#if defined(CONFIG_4KSTACKS)
+#define THREAD_SIZE_ORDER	(0)
+#elif defined(CONFIG_PAGE_SIZE_4KB)
+#define THREAD_SIZE_ORDER	(1)
+#elif defined(CONFIG_PAGE_SIZE_8KB)
+#define THREAD_SIZE_ORDER	(1)
+#elif defined(CONFIG_PAGE_SIZE_16KB)
+#define THREAD_SIZE_ORDER	(0)
+#elif defined(CONFIG_PAGE_SIZE_64KB)
+#define THREAD_SIZE_ORDER	(0)
+#else
+#error "Unknown thread size"
+#endif
+
+#define THREAD_SIZE	(PAGE_SIZE << THREAD_SIZE_ORDER)
+#define STACK_WARN	(THREAD_SIZE >> 3)
+
+/*
+ * macros/functions for gaining access to the thread information structure
+ */
+#ifndef __ASSEMBLY__
+#define INIT_THREAD_INFO(tsk)			\
+{						\
+	.task		= &tsk,			\
+	.exec_domain	= &default_exec_domain,	\
+	.flags		= 0,			\
+	.cpu		= 0,			\
+	.preempt_count	= 1,			\
+	.addr_limit	= KERNEL_DS,		\
+	.restart_block	= {			\
+		.fn = do_no_restart_syscall,	\
+	},					\
+}
+
+#define init_thread_info	(init_thread_union.thread_info)
+#define init_stack		(init_thread_union.stack)
+
+/* how to get the current stack pointer from C */
+register unsigned long current_stack_pointer asm("r15") __used;
+
+/* how to get the thread information struct from C */
+static inline struct thread_info *current_thread_info(void)
+{
+	struct thread_info *ti;
+#if defined(CONFIG_SUPERH64)
+	__asm__ __volatile__ ("getcon	cr17, %0" : "=r" (ti));
+#elif defined(CONFIG_CPU_HAS_SR_RB)
+	__asm__ __volatile__ ("stc	r7_bank, %0" : "=r" (ti));
+#else
+	unsigned long __dummy;
+
+	__asm__ __volatile__ (
+		"mov	r15, %0\n\t"
+		"and	%1, %0\n\t"
+		: "=&r" (ti), "=r" (__dummy)
+		: "1" (~(THREAD_SIZE - 1))
+		: "memory");
+#endif
+
+	return ti;
+}
+
+#define __HAVE_ARCH_THREAD_INFO_ALLOCATOR
+
+/* thread information allocation */
+#ifdef CONFIG_DEBUG_STACK_USAGE
+#define alloc_thread_info(ti)	kzalloc(THREAD_SIZE, GFP_KERNEL)
+#else
+#define alloc_thread_info(ti)	kmalloc(THREAD_SIZE, GFP_KERNEL)
+#endif
+#define free_thread_info(ti)	kfree(ti)
+
+#endif /* __ASSEMBLY__ */
+
+/*
+ * thread information flags
+ * - these are process state flags that various assembly files may need to access
+ * - pending work-to-be-done flags are in LSW
+ * - other flags in MSW
+ */
+#define TIF_SYSCALL_TRACE	0	/* syscall trace active */
+#define TIF_SIGPENDING		1	/* signal pending */
+#define TIF_NEED_RESCHED	2	/* rescheduling necessary */
+#define TIF_RESTORE_SIGMASK	3	/* restore signal mask in do_signal() */
+#define TIF_SINGLESTEP		4	/* singlestepping active */
+#define TIF_SYSCALL_AUDIT	5	/* syscall auditing active */
+#define TIF_SECCOMP		6	/* secure computing */
+#define TIF_NOTIFY_RESUME	7	/* callback before returning to user */
+#define TIF_USEDFPU		16	/* FPU was used by this task this quantum (SMP) */
+#define TIF_POLLING_NRFLAG	17	/* true if poll_idle() is polling TIF_NEED_RESCHED */
+#define TIF_MEMDIE		18
+#define TIF_FREEZE		19	/* Freezing for suspend */
+
+#define _TIF_SYSCALL_TRACE	(1 << TIF_SYSCALL_TRACE)
+#define _TIF_SIGPENDING		(1 << TIF_SIGPENDING)
+#define _TIF_NEED_RESCHED	(1 << TIF_NEED_RESCHED)
+#define _TIF_RESTORE_SIGMASK	(1 << TIF_RESTORE_SIGMASK)
+#define _TIF_SINGLESTEP		(1 << TIF_SINGLESTEP)
+#define _TIF_SYSCALL_AUDIT	(1 << TIF_SYSCALL_AUDIT)
+#define _TIF_SECCOMP		(1 << TIF_SECCOMP)
+#define _TIF_NOTIFY_RESUME	(1 << TIF_NOTIFY_RESUME)
+#define _TIF_USEDFPU		(1 << TIF_USEDFPU)
+#define _TIF_POLLING_NRFLAG	(1 << TIF_POLLING_NRFLAG)
+#define _TIF_FREEZE		(1 << TIF_FREEZE)
+
+/*
+ * _TIF_ALLWORK_MASK and _TIF_WORK_MASK need to fit within a byte, or we
+ * blow the tst immediate size constraints and need to fix up
+ * arch/sh/kernel/entry-common.S.
+ */
+
+/* work to do in syscall trace */
+#define _TIF_WORK_SYSCALL_MASK	(_TIF_SYSCALL_TRACE | _TIF_SINGLESTEP | \
+				 _TIF_SYSCALL_AUDIT | _TIF_SECCOMP)
+
+/* work to do on any return to u-space */
+#define _TIF_ALLWORK_MASK	(_TIF_SYSCALL_TRACE | _TIF_SIGPENDING      | \
+				 _TIF_NEED_RESCHED  | _TIF_SYSCALL_AUDIT   | \
+				 _TIF_SINGLESTEP    | _TIF_RESTORE_SIGMASK | \
+				 _TIF_NOTIFY_RESUME)
+
+/* work to do on interrupt/exception return */
+#define _TIF_WORK_MASK		(_TIF_ALLWORK_MASK & ~(_TIF_SYSCALL_TRACE | \
+				 _TIF_SYSCALL_AUDIT | _TIF_SINGLESTEP))
+
+#endif /* __KERNEL__ */
+
+#endif /* __ASM_SH_THREAD_INFO_H */
diff --git a/arch/sh/include/asm/timer.h b/arch/sh/include/asm/timer.h
new file mode 100644
index 000000000000..a7ca3a195bb5
--- /dev/null
+++ b/arch/sh/include/asm/timer.h
@@ -0,0 +1,44 @@
+#ifndef __ASM_SH_TIMER_H
+#define __ASM_SH_TIMER_H
+
+#include <linux/sysdev.h>
+#include <linux/clocksource.h>
+#include <cpu/timer.h>
+
+struct sys_timer_ops {
+	int (*init)(void);
+	int (*start)(void);
+	int (*stop)(void);
+	cycle_t (*read)(void);
+#ifndef CONFIG_GENERIC_TIME
+	unsigned long (*get_offset)(void);
+#endif
+};
+
+struct sys_timer {
+	const char		*name;
+
+	struct sys_device	dev;
+	struct sys_timer_ops	*ops;
+};
+
+#define TICK_SIZE (tick_nsec / 1000)
+
+extern struct sys_timer tmu_timer, cmt_timer, mtu2_timer;
+extern struct sys_timer *sys_timer;
+
+#ifndef CONFIG_GENERIC_TIME
+static inline unsigned long get_timer_offset(void)
+{
+	return sys_timer->ops->get_offset();
+}
+#endif
+
+/* arch/sh/kernel/timers/timer.c */
+struct sys_timer *get_sys_timer(void);
+
+/* arch/sh/kernel/time.c */
+void handle_timer_tick(void);
+extern unsigned long sh_hpt_frequency;
+
+#endif /* __ASM_SH_TIMER_H */
diff --git a/include/asm-sh/timex.h b/arch/sh/include/asm/timex.h
index a873e24113cf..a873e24113cf 100644
--- a/include/asm-sh/timex.h
+++ b/arch/sh/include/asm/timex.h
diff --git a/include/asm-sh/titan.h b/arch/sh/include/asm/titan.h
index 03f3583c8918..03f3583c8918 100644
--- a/include/asm-sh/titan.h
+++ b/arch/sh/include/asm/titan.h
diff --git a/include/asm-sh/tlb.h b/arch/sh/include/asm/tlb.h
index 88ff1ae8a6b8..88ff1ae8a6b8 100644
--- a/include/asm-sh/tlb.h
+++ b/arch/sh/include/asm/tlb.h
diff --git a/include/asm-sh/tlb_64.h b/arch/sh/include/asm/tlb_64.h
index 0a96f3af69e3..ef0ae2a28f23 100644
--- a/include/asm-sh/tlb_64.h
+++ b/arch/sh/include/asm/tlb_64.h
@@ -21,11 +21,9 @@
 #ifndef __ASSEMBLY__
 
 /**
- * for_each_dtlb_entry
+ * for_each_dtlb_entry - Iterate over free (non-wired) DTLB entries
  *
  * @tlb:	TLB entry
- *
- * Iterate over free (non-wired) DTLB entries
  */
 #define for_each_dtlb_entry(tlb)		\
 	for (tlb  = cpu_data->dtlb.first;	\
@@ -33,11 +31,9 @@
 	     tlb += cpu_data->dtlb.step)
 
 /**
- * for_each_itlb_entry
+ * for_each_itlb_entry - Iterate over free (non-wired) ITLB entries
  *
  * @tlb:	TLB entry
- *
- * Iterate over free (non-wired) ITLB entries
  */
 #define for_each_itlb_entry(tlb)		\
 	for (tlb  = cpu_data->itlb.first;	\
@@ -45,11 +41,9 @@
 	     tlb += cpu_data->itlb.step)
 
 /**
- * __flush_tlb_slot
+ * __flush_tlb_slot - Flushes TLB slot @slot.
  *
  * @slot:	Address of TLB slot.
- *
- * Flushes TLB slot @slot.
  */
 static inline void __flush_tlb_slot(unsigned long long slot)
 {
diff --git a/include/asm-sh/tlbflush.h b/arch/sh/include/asm/tlbflush.h
index e0ac97221ae6..e0ac97221ae6 100644
--- a/include/asm-sh/tlbflush.h
+++ b/arch/sh/include/asm/tlbflush.h
diff --git a/include/asm-sh/topology.h b/arch/sh/include/asm/topology.h
index 95f0085e098a..95f0085e098a 100644
--- a/include/asm-sh/topology.h
+++ b/arch/sh/include/asm/topology.h
diff --git a/include/asm-sh/types.h b/arch/sh/include/asm/types.h
index beea4e6f8dfd..beea4e6f8dfd 100644
--- a/include/asm-sh/types.h
+++ b/arch/sh/include/asm/types.h
diff --git a/arch/sh/include/asm/uaccess.h b/arch/sh/include/asm/uaccess.h
new file mode 100644
index 000000000000..075848f43b6a
--- /dev/null
+++ b/arch/sh/include/asm/uaccess.h
@@ -0,0 +1,258 @@
+#ifndef __ASM_SH_UACCESS_H
+#define __ASM_SH_UACCESS_H
+
+#include <linux/errno.h>
+#include <linux/sched.h>
+#include <asm/segment.h>
+
+#define VERIFY_READ    0
+#define VERIFY_WRITE   1
+
+#define __addr_ok(addr) \
+	((unsigned long __force)(addr) < current_thread_info()->addr_limit.seg)
+
+/*
+ * __access_ok: Check if address with size is OK or not.
+ *
+ * Uhhuh, this needs 33-bit arithmetic. We have a carry..
+ *
+ * sum := addr + size;  carry? --> flag = true;
+ * if (sum >= addr_limit) flag = true;
+ */
+#define __access_ok(addr, size)		\
+	(__addr_ok((addr) + (size)))
+#define access_ok(type, addr, size)	\
+	(__chk_user_ptr(addr),		\
+	 __access_ok((unsigned long __force)(addr), (size)))
+
+/*
+ * Uh, these should become the main single-value transfer routines ...
+ * They automatically use the right size if we just have the right
+ * pointer type ...
+ *
+ * As SuperH uses the same address space for kernel and user data, we
+ * can just do these as direct assignments.
+ *
+ * Careful to not
+ * (a) re-use the arguments for side effects (sizeof is ok)
+ * (b) require any knowledge of processes at this stage
+ */
+#define put_user(x,ptr)		__put_user_check((x), (ptr), sizeof(*(ptr)))
+#define get_user(x,ptr)		__get_user_check((x), (ptr), sizeof(*(ptr)))
+
+/*
+ * The "__xxx" versions do not do address space checking, useful when
+ * doing multiple accesses to the same area (the user has to do the
+ * checks by hand with "access_ok()")
+ */
+#define __put_user(x,ptr)	__put_user_nocheck((x), (ptr), sizeof(*(ptr)))
+#define __get_user(x,ptr)	__get_user_nocheck((x), (ptr), sizeof(*(ptr)))
+
+struct __large_struct { unsigned long buf[100]; };
+#define __m(x) (*(struct __large_struct __user *)(x))
+
+#define __get_user_nocheck(x,ptr,size)				\
+({								\
+	long __gu_err;						\
+	unsigned long __gu_val;					\
+	const __typeof__(*(ptr)) __user *__gu_addr = (ptr);	\
+	__chk_user_ptr(ptr);					\
+	__get_user_size(__gu_val, __gu_addr, (size), __gu_err);	\
+	(x) = (__typeof__(*(ptr)))__gu_val;			\
+	__gu_err;						\
+})
+
+#define __get_user_check(x,ptr,size)					\
+({									\
+	long __gu_err = -EFAULT;					\
+	unsigned long __gu_val = 0;					\
+	const __typeof__(*(ptr)) *__gu_addr = (ptr);			\
+	if (likely(access_ok(VERIFY_READ, __gu_addr, (size))))		\
+		__get_user_size(__gu_val, __gu_addr, (size), __gu_err);	\
+	(x) = (__typeof__(*(ptr)))__gu_val;				\
+	__gu_err;							\
+})
+
+#define __put_user_nocheck(x,ptr,size)				\
+({								\
+	long __pu_err;						\
+	__typeof__(*(ptr)) __user *__pu_addr = (ptr);		\
+	__typeof__(*(ptr)) __pu_val = x;			\
+	__chk_user_ptr(ptr);					\
+	__put_user_size(__pu_val, __pu_addr, (size), __pu_err);	\
+	__pu_err;						\
+})
+
+#define __put_user_check(x,ptr,size)				\
+({								\
+	long __pu_err = -EFAULT;				\
+	__typeof__(*(ptr)) __user *__pu_addr = (ptr);		\
+	__typeof__(*(ptr)) __pu_val = x;			\
+	if (likely(access_ok(VERIFY_WRITE, __pu_addr, size)))	\
+		__put_user_size(__pu_val, __pu_addr, (size),	\
+				__pu_err);			\
+	__pu_err;						\
+})
+
+#ifdef CONFIG_SUPERH32
+# include "uaccess_32.h"
+#else
+# include "uaccess_64.h"
+#endif
+
+/* Generic arbitrary sized copy.  */
+/* Return the number of bytes NOT copied */
+__kernel_size_t __copy_user(void *to, const void *from, __kernel_size_t n);
+
+static __always_inline unsigned long
+__copy_from_user(void *to, const void __user *from, unsigned long n)
+{
+	return __copy_user(to, (__force void *)from, n);
+}
+
+static __always_inline unsigned long __must_check
+__copy_to_user(void __user *to, const void *from, unsigned long n)
+{
+	return __copy_user((__force void *)to, from, n);
+}
+
+#define __copy_to_user_inatomic __copy_to_user
+#define __copy_from_user_inatomic __copy_from_user
+
+/*
+ * Clear the area and return remaining number of bytes
+ * (on failure.  Usually it's 0.)
+ */
+__kernel_size_t __clear_user(void *addr, __kernel_size_t size);
+
+#define clear_user(addr,n)						\
+({									\
+	void __user * __cl_addr = (addr);				\
+	unsigned long __cl_size = (n);					\
+									\
+	if (__cl_size && access_ok(VERIFY_WRITE,			\
+		((unsigned long)(__cl_addr)), __cl_size))		\
+		__cl_size = __clear_user(__cl_addr, __cl_size);		\
+									\
+	__cl_size;							\
+})
+
+/**
+ * strncpy_from_user: - Copy a NUL terminated string from userspace.
+ * @dst:   Destination address, in kernel space.  This buffer must be at
+ *         least @count bytes long.
+ * @src:   Source address, in user space.
+ * @count: Maximum number of bytes to copy, including the trailing NUL.
+ *
+ * Copies a NUL-terminated string from userspace to kernel space.
+ *
+ * On success, returns the length of the string (not including the trailing
+ * NUL).
+ *
+ * If access to userspace fails, returns -EFAULT (some data may have been
+ * copied).
+ *
+ * If @count is smaller than the length of the string, copies @count bytes
+ * and returns @count.
+ */
+#define strncpy_from_user(dest,src,count)				\
+({									\
+	unsigned long __sfu_src = (unsigned long)(src);			\
+	int __sfu_count = (int)(count);					\
+	long __sfu_res = -EFAULT;					\
+									\
+	if (__access_ok(__sfu_src, __sfu_count))			\
+		__sfu_res = __strncpy_from_user((unsigned long)(dest),	\
+				__sfu_src, __sfu_count);		\
+									\
+	__sfu_res;							\
+})
+
+static inline unsigned long
+copy_from_user(void *to, const void __user *from, unsigned long n)
+{
+	unsigned long __copy_from = (unsigned long) from;
+	__kernel_size_t __copy_size = (__kernel_size_t) n;
+
+	if (__copy_size && __access_ok(__copy_from, __copy_size))
+		return __copy_user(to, from, __copy_size);
+
+	return __copy_size;
+}
+
+static inline unsigned long
+copy_to_user(void __user *to, const void *from, unsigned long n)
+{
+	unsigned long __copy_to = (unsigned long) to;
+	__kernel_size_t __copy_size = (__kernel_size_t) n;
+
+	if (__copy_size && __access_ok(__copy_to, __copy_size))
+		return __copy_user(to, from, __copy_size);
+
+	return __copy_size;
+}
+
+/**
+ * strnlen_user: - Get the size of a string in user space.
+ * @s: The string to measure.
+ * @n: The maximum valid length
+ *
+ * Context: User context only.  This function may sleep.
+ *
+ * Get the size of a NUL-terminated string in user space.
+ *
+ * Returns the size of the string INCLUDING the terminating NUL.
+ * On exception, returns 0.
+ * If the string is too long, returns a value greater than @n.
+ */
+static inline long strnlen_user(const char __user *s, long n)
+{
+	if (!__addr_ok(s))
+		return 0;
+	else
+		return __strnlen_user(s, n);
+}
+
+/**
+ * strlen_user: - Get the size of a string in user space.
+ * @str: The string to measure.
+ *
+ * Context: User context only.  This function may sleep.
+ *
+ * Get the size of a NUL-terminated string in user space.
+ *
+ * Returns the size of the string INCLUDING the terminating NUL.
+ * On exception, returns 0.
+ *
+ * If there is a limit on the length of a valid string, you may wish to
+ * consider using strnlen_user() instead.
+ */
+#define strlen_user(str)	strnlen_user(str, ~0UL >> 1)
+
+/*
+ * The exception table consists of pairs of addresses: the first is the
+ * address of an instruction that is allowed to fault, and the second is
+ * the address at which the program should continue.  No registers are
+ * modified, so it is entirely up to the continuation code to figure out
+ * what to do.
+ *
+ * All the routines below use bits of fixup code that are out of line
+ * with the main instruction path.  This means when everything is well,
+ * we don't even have to jump over them.  Further, they do not intrude
+ * on our cache or tlb entries.
+ */
+struct exception_table_entry {
+	unsigned long insn, fixup;
+};
+
+#if defined(CONFIG_SUPERH64) && defined(CONFIG_MMU)
+#define ARCH_HAS_SEARCH_EXTABLE
+#endif
+
+int fixup_exception(struct pt_regs *regs);
+/* Returns 0 if exception not found and fixup.unit otherwise.  */
+unsigned long search_exception_table(unsigned long addr);
+const struct exception_table_entry *search_exception_tables(unsigned long addr);
+
+
+#endif /* __ASM_SH_UACCESS_H */
diff --git a/arch/sh/include/asm/uaccess_32.h b/arch/sh/include/asm/uaccess_32.h
new file mode 100644
index 000000000000..ae0d24f6653f
--- /dev/null
+++ b/arch/sh/include/asm/uaccess_32.h
@@ -0,0 +1,248 @@
+/*
+ * User space memory access functions
+ *
+ * Copyright (C) 1999, 2002  Niibe Yutaka
+ * Copyright (C) 2003 - 2008  Paul Mundt
+ *
+ *  Based on:
+ *     MIPS implementation version 1.15 by
+ *              Copyright (C) 1996, 1997, 1998 by Ralf Baechle
+ *     and i386 version.
+ */
+#ifndef __ASM_SH_UACCESS_32_H
+#define __ASM_SH_UACCESS_32_H
+
+#define __get_user_size(x,ptr,size,retval)			\
+do {								\
+	retval = 0;						\
+	switch (size) {						\
+	case 1:							\
+		__get_user_asm(x, ptr, retval, "b");		\
+		break;						\
+	case 2:							\
+		__get_user_asm(x, ptr, retval, "w");		\
+		break;						\
+	case 4:							\
+		__get_user_asm(x, ptr, retval, "l");		\
+		break;						\
+	default:						\
+		__get_user_unknown();				\
+		break;						\
+	}							\
+} while (0)
+
+#ifdef CONFIG_MMU
+#define __get_user_asm(x, addr, err, insn) \
+({ \
+__asm__ __volatile__( \
+	"1:\n\t" \
+	"mov." insn "	%2, %1\n\t" \
+	"2:\n" \
+	".section	.fixup,\"ax\"\n" \
+	"3:\n\t" \
+	"mov	#0, %1\n\t" \
+	"mov.l	4f, %0\n\t" \
+	"jmp	@%0\n\t" \
+	" mov	%3, %0\n\t" \
+	".balign	4\n" \
+	"4:	.long	2b\n\t" \
+	".previous\n" \
+	".section	__ex_table,\"a\"\n\t" \
+	".long	1b, 3b\n\t" \
+	".previous" \
+	:"=&r" (err), "=&r" (x) \
+	:"m" (__m(addr)), "i" (-EFAULT), "0" (err)); })
+#else
+#define __get_user_asm(x, addr, err, insn)		\
+do {							\
+	__asm__ __volatile__ (				\
+		"mov." insn "	%1, %0\n\t"		\
+		: "=&r" (x)				\
+		: "m" (__m(addr))			\
+	);						\
+} while (0)
+#endif /* CONFIG_MMU */
+
+extern void __get_user_unknown(void);
+
+#define __put_user_size(x,ptr,size,retval)		\
+do {							\
+	retval = 0;					\
+	switch (size) {					\
+	case 1:						\
+		__put_user_asm(x, ptr, retval, "b");	\
+		break;					\
+	case 2:						\
+		__put_user_asm(x, ptr, retval, "w");	\
+		break;					\
+	case 4:						\
+		__put_user_asm(x, ptr, retval, "l");	\
+		break;					\
+	case 8:						\
+		__put_user_u64(x, ptr, retval);		\
+		break;					\
+	default:					\
+		__put_user_unknown();			\
+	}						\
+} while (0)
+
+#ifdef CONFIG_MMU
+#define __put_user_asm(x, addr, err, insn)			\
+do {								\
+	__asm__ __volatile__ (					\
+		"1:\n\t"					\
+		"mov." insn "	%1, %2\n\t"			\
+		"2:\n"						\
+		".section	.fixup,\"ax\"\n"		\
+		"3:\n\t"					\
+		"mov.l	4f, %0\n\t"				\
+		"jmp	@%0\n\t"				\
+		" mov	%3, %0\n\t"				\
+		".balign	4\n"				\
+		"4:	.long	2b\n\t"				\
+		".previous\n"					\
+		".section	__ex_table,\"a\"\n\t"		\
+		".long	1b, 3b\n\t"				\
+		".previous"					\
+		: "=&r" (err)					\
+		: "r" (x), "m" (__m(addr)), "i" (-EFAULT),	\
+		  "0" (err)					\
+		: "memory"					\
+	);							\
+} while (0)
+#else
+#define __put_user_asm(x, addr, err, insn)		\
+do {							\
+	__asm__ __volatile__ (				\
+		"mov." insn "	%0, %1\n\t"		\
+		: /* no outputs */			\
+		: "r" (x), "m" (__m(addr))		\
+		: "memory"				\
+	);						\
+} while (0)
+#endif /* CONFIG_MMU */
+
+#if defined(CONFIG_CPU_LITTLE_ENDIAN)
+#define __put_user_u64(val,addr,retval) \
+({ \
+__asm__ __volatile__( \
+	"1:\n\t" \
+	"mov.l	%R1,%2\n\t" \
+	"mov.l	%S1,%T2\n\t" \
+	"2:\n" \
+	".section	.fixup,\"ax\"\n" \
+	"3:\n\t" \
+	"mov.l	4f,%0\n\t" \
+	"jmp	@%0\n\t" \
+	" mov	%3,%0\n\t" \
+	".balign	4\n" \
+	"4:	.long	2b\n\t" \
+	".previous\n" \
+	".section	__ex_table,\"a\"\n\t" \
+	".long	1b, 3b\n\t" \
+	".previous" \
+	: "=r" (retval) \
+	: "r" (val), "m" (__m(addr)), "i" (-EFAULT), "0" (retval) \
+        : "memory"); })
+#else
+#define __put_user_u64(val,addr,retval) \
+({ \
+__asm__ __volatile__( \
+	"1:\n\t" \
+	"mov.l	%S1,%2\n\t" \
+	"mov.l	%R1,%T2\n\t" \
+	"2:\n" \
+	".section	.fixup,\"ax\"\n" \
+	"3:\n\t" \
+	"mov.l	4f,%0\n\t" \
+	"jmp	@%0\n\t" \
+	" mov	%3,%0\n\t" \
+	".balign	4\n" \
+	"4:	.long	2b\n\t" \
+	".previous\n" \
+	".section	__ex_table,\"a\"\n\t" \
+	".long	1b, 3b\n\t" \
+	".previous" \
+	: "=r" (retval) \
+	: "r" (val), "m" (__m(addr)), "i" (-EFAULT), "0" (retval) \
+        : "memory"); })
+#endif
+
+extern void __put_user_unknown(void);
+
+static inline int
+__strncpy_from_user(unsigned long __dest, unsigned long __user __src, int __count)
+{
+	__kernel_size_t res;
+	unsigned long __dummy, _d, _s, _c;
+
+	__asm__ __volatile__(
+		"9:\n"
+		"mov.b	@%2+, %1\n\t"
+		"cmp/eq	#0, %1\n\t"
+		"bt/s	2f\n"
+		"1:\n"
+		"mov.b	%1, @%3\n\t"
+		"dt	%4\n\t"
+		"bf/s	9b\n\t"
+		" add	#1, %3\n\t"
+		"2:\n\t"
+		"sub	%4, %0\n"
+		"3:\n"
+		".section .fixup,\"ax\"\n"
+		"4:\n\t"
+		"mov.l	5f, %1\n\t"
+		"jmp	@%1\n\t"
+		" mov	%9, %0\n\t"
+		".balign 4\n"
+		"5:	.long 3b\n"
+		".previous\n"
+		".section __ex_table,\"a\"\n"
+		"	.balign 4\n"
+		"	.long 9b,4b\n"
+		".previous"
+		: "=r" (res), "=&z" (__dummy), "=r" (_s), "=r" (_d), "=r"(_c)
+		: "0" (__count), "2" (__src), "3" (__dest), "4" (__count),
+		  "i" (-EFAULT)
+		: "memory", "t");
+
+	return res;
+}
+
+/*
+ * Return the size of a string (including the ending 0 even when we have
+ * exceeded the maximum string length).
+ */
+static inline long __strnlen_user(const char __user *__s, long __n)
+{
+	unsigned long res;
+	unsigned long __dummy;
+
+	__asm__ __volatile__(
+		"1:\t"
+		"mov.b	@(%0,%3), %1\n\t"
+		"cmp/eq	%4, %0\n\t"
+		"bt/s	2f\n\t"
+		" add	#1, %0\n\t"
+		"tst	%1, %1\n\t"
+		"bf	1b\n\t"
+		"2:\n"
+		".section .fixup,\"ax\"\n"
+		"3:\n\t"
+		"mov.l	4f, %1\n\t"
+		"jmp	@%1\n\t"
+		" mov	#0, %0\n"
+		".balign 4\n"
+		"4:	.long 2b\n"
+		".previous\n"
+		".section __ex_table,\"a\"\n"
+		"	.balign 4\n"
+		"	.long 1b,3b\n"
+		".previous"
+		: "=z" (res), "=&r" (__dummy)
+		: "0" (0), "r" (__s), "r" (__n)
+		: "t");
+	return res;
+}
+
+#endif /* __ASM_SH_UACCESS_32_H */
diff --git a/arch/sh/include/asm/uaccess_64.h b/arch/sh/include/asm/uaccess_64.h
new file mode 100644
index 000000000000..81b3d515fcb3
--- /dev/null
+++ b/arch/sh/include/asm/uaccess_64.h
@@ -0,0 +1,79 @@
+#ifndef __ASM_SH_UACCESS_64_H
+#define __ASM_SH_UACCESS_64_H
+
+/*
+ * include/asm-sh/uaccess_64.h
+ *
+ * Copyright (C) 2000, 2001  Paolo Alberelli
+ * Copyright (C) 2003, 2004  Paul Mundt
+ *
+ * User space memory access functions
+ *
+ * Copyright (C) 1999  Niibe Yutaka
+ *
+ *  Based on:
+ *     MIPS implementation version 1.15 by
+ *              Copyright (C) 1996, 1997, 1998 by Ralf Baechle
+ *     and i386 version.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#define __get_user_size(x,ptr,size,retval)			\
+do {								\
+	retval = 0;						\
+	switch (size) {						\
+	case 1:							\
+		retval = __get_user_asm_b(x, ptr);		\
+		break;						\
+	case 2:							\
+		retval = __get_user_asm_w(x, ptr);		\
+		break;						\
+	case 4:							\
+		retval = __get_user_asm_l(x, ptr);		\
+		break;						\
+	case 8:							\
+		retval = __get_user_asm_q(x, ptr);		\
+		break;						\
+	default:						\
+		__get_user_unknown();				\
+		break;						\
+	}							\
+} while (0)
+
+extern long __get_user_asm_b(void *, long);
+extern long __get_user_asm_w(void *, long);
+extern long __get_user_asm_l(void *, long);
+extern long __get_user_asm_q(void *, long);
+extern void __get_user_unknown(void);
+
+#define __put_user_size(x,ptr,size,retval)			\
+do {								\
+	retval = 0;						\
+	switch (size) {						\
+	case 1:							\
+		retval = __put_user_asm_b(x, ptr);		\
+		break;						\
+	case 2:							\
+		retval = __put_user_asm_w(x, ptr);		\
+		break;						\
+	case 4:							\
+		retval = __put_user_asm_l(x, ptr);		\
+		break;						\
+	case 8:							\
+		retval = __put_user_asm_q(x, ptr);		\
+		break;						\
+	default:						\
+		__put_user_unknown();				\
+	}							\
+} while (0)
+
+extern long __put_user_asm_b(void *, long);
+extern long __put_user_asm_w(void *, long);
+extern long __put_user_asm_l(void *, long);
+extern long __put_user_asm_q(void *, long);
+extern void __put_user_unknown(void);
+
+#endif /* __ASM_SH_UACCESS_64_H */
diff --git a/arch/sh/include/asm/ubc.h b/arch/sh/include/asm/ubc.h
new file mode 100644
index 000000000000..a7b9028bbfbb
--- /dev/null
+++ b/arch/sh/include/asm/ubc.h
@@ -0,0 +1,64 @@
+/*
+ * include/asm-sh/ubc.h
+ *
+ * Copyright (C) 1999 Niibe Yutaka
+ * Copyright (C) 2002, 2003 Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#ifndef __ASM_SH_UBC_H
+#define __ASM_SH_UBC_H
+#ifdef __KERNEL__
+
+#include <cpu/ubc.h>
+
+/* User Break Controller */
+#if defined(CONFIG_CPU_SUBTYPE_SH7707) || defined(CONFIG_CPU_SUBTYPE_SH7709)
+#define UBC_TYPE_SH7729	(current_cpu_data.type == CPU_SH7729)
+#else
+#define UBC_TYPE_SH7729	0
+#endif
+
+#define BAMR_ASID		(1 << 2)
+#define BAMR_NONE		0
+#define BAMR_10			0x1
+#define BAMR_12			0x2
+#define BAMR_ALL		0x3
+#define BAMR_16			0x8
+#define BAMR_20			0x9
+
+#define BBR_INST		(1 << 4)
+#define BBR_DATA		(2 << 4)
+#define BBR_READ		(1 << 2)
+#define BBR_WRITE		(2 << 2)
+#define BBR_BYTE		0x1
+#define BBR_HALF		0x2
+#define BBR_LONG		0x3
+#define BBR_QUAD		(1 << 6)	/* SH7750 */
+#define BBR_CPU			(1 << 6)	/* SH7709A,SH7729 */
+#define BBR_DMA			(2 << 6)	/* SH7709A,SH7729 */
+
+#define BRCR_CMFA		(1 << 15)
+#define BRCR_CMFB		(1 << 14)
+#define BRCR_PCTE		(1 << 11)
+#define BRCR_PCBA		(1 << 10)	/* 1: after execution */
+#define BRCR_DBEB		(1 << 7)
+#define BRCR_PCBB		(1 << 6)
+#define BRCR_SEQ		(1 << 3)
+#define BRCR_UBDE		(1 << 0)
+
+#ifndef __ASSEMBLY__
+/* arch/sh/kernel/cpu/ubc.S */
+extern void ubc_sleep(void);
+
+#ifdef CONFIG_UBC_WAKEUP
+extern void ubc_wakeup(void);
+#else
+#define ubc_wakeup()	do { } while (0)
+#endif
+#endif
+
+#endif /* __KERNEL__ */
+#endif /* __ASM_SH_UBC_H */
diff --git a/include/asm-sh/ucontext.h b/arch/sh/include/asm/ucontext.h
index 202ef1d5a3c4..202ef1d5a3c4 100644
--- a/include/asm-sh/ucontext.h
+++ b/arch/sh/include/asm/ucontext.h
diff --git a/include/asm-sh/unaligned.h b/arch/sh/include/asm/unaligned.h
index c1641a01d50f..c1641a01d50f 100644
--- a/include/asm-sh/unaligned.h
+++ b/arch/sh/include/asm/unaligned.h
diff --git a/arch/sh/include/asm/unistd.h b/arch/sh/include/asm/unistd.h
new file mode 100644
index 000000000000..65be656ead7d
--- /dev/null
+++ b/arch/sh/include/asm/unistd.h
@@ -0,0 +1,13 @@
+#ifdef __KERNEL__
+# ifdef CONFIG_SUPERH32
+#  include "unistd_32.h"
+# else
+#  include "unistd_64.h"
+# endif
+#else
+# ifdef __SH5__
+#  include "unistd_64.h"
+# else
+#  include "unistd_32.h"
+# endif
+#endif
diff --git a/arch/sh/include/asm/unistd_32.h b/arch/sh/include/asm/unistd_32.h
new file mode 100644
index 000000000000..d52c000cf924
--- /dev/null
+++ b/arch/sh/include/asm/unistd_32.h
@@ -0,0 +1,384 @@
+#ifndef __ASM_SH_UNISTD_H
+#define __ASM_SH_UNISTD_H
+
+/*
+ * Copyright (C) 1999  Niibe Yutaka
+ */
+
+/*
+ * This file contains the system call numbers.
+ */
+
+#define __NR_restart_syscall	  0
+#define __NR_exit		  1
+#define __NR_fork		  2
+#define __NR_read		  3
+#define __NR_write		  4
+#define __NR_open		  5
+#define __NR_close		  6
+#define __NR_waitpid		  7
+#define __NR_creat		  8
+#define __NR_link		  9
+#define __NR_unlink		 10
+#define __NR_execve		 11
+#define __NR_chdir		 12
+#define __NR_time		 13
+#define __NR_mknod		 14
+#define __NR_chmod		 15
+#define __NR_lchown		 16
+#define __NR_break		 17
+#define __NR_oldstat		 18
+#define __NR_lseek		 19
+#define __NR_getpid		 20
+#define __NR_mount		 21
+#define __NR_umount		 22
+#define __NR_setuid		 23
+#define __NR_getuid		 24
+#define __NR_stime		 25
+#define __NR_ptrace		 26
+#define __NR_alarm		 27
+#define __NR_oldfstat		 28
+#define __NR_pause		 29
+#define __NR_utime		 30
+#define __NR_stty		 31
+#define __NR_gtty		 32
+#define __NR_access		 33
+#define __NR_nice		 34
+#define __NR_ftime		 35
+#define __NR_sync		 36
+#define __NR_kill		 37
+#define __NR_rename		 38
+#define __NR_mkdir		 39
+#define __NR_rmdir		 40
+#define __NR_dup		 41
+#define __NR_pipe		 42
+#define __NR_times		 43
+#define __NR_prof		 44
+#define __NR_brk		 45
+#define __NR_setgid		 46
+#define __NR_getgid		 47
+#define __NR_signal		 48
+#define __NR_geteuid		 49
+#define __NR_getegid		 50
+#define __NR_acct		 51
+#define __NR_umount2		 52
+#define __NR_lock		 53
+#define __NR_ioctl		 54
+#define __NR_fcntl		 55
+#define __NR_mpx		 56
+#define __NR_setpgid		 57
+#define __NR_ulimit		 58
+#define __NR_oldolduname	 59
+#define __NR_umask		 60
+#define __NR_chroot		 61
+#define __NR_ustat		 62
+#define __NR_dup2		 63
+#define __NR_getppid		 64
+#define __NR_getpgrp		 65
+#define __NR_setsid		 66
+#define __NR_sigaction		 67
+#define __NR_sgetmask		 68
+#define __NR_ssetmask		 69
+#define __NR_setreuid		 70
+#define __NR_setregid		 71
+#define __NR_sigsuspend		 72
+#define __NR_sigpending		 73
+#define __NR_sethostname	 74
+#define __NR_setrlimit		 75
+#define __NR_getrlimit		 76	/* Back compatible 2Gig limited rlimit */
+#define __NR_getrusage		 77
+#define __NR_gettimeofday	 78
+#define __NR_settimeofday	 79
+#define __NR_getgroups		 80
+#define __NR_setgroups		 81
+#define __NR_select		 82
+#define __NR_symlink		 83
+#define __NR_oldlstat		 84
+#define __NR_readlink		 85
+#define __NR_uselib		 86
+#define __NR_swapon		 87
+#define __NR_reboot		 88
+#define __NR_readdir		 89
+#define __NR_mmap		 90
+#define __NR_munmap		 91
+#define __NR_truncate		 92
+#define __NR_ftruncate		 93
+#define __NR_fchmod		 94
+#define __NR_fchown		 95
+#define __NR_getpriority	 96
+#define __NR_setpriority	 97
+#define __NR_profil		 98
+#define __NR_statfs		 99
+#define __NR_fstatfs		100
+#define __NR_ioperm		101
+#define __NR_socketcall		102
+#define __NR_syslog		103
+#define __NR_setitimer		104
+#define __NR_getitimer		105
+#define __NR_stat		106
+#define __NR_lstat		107
+#define __NR_fstat		108
+#define __NR_olduname		109
+#define __NR_iopl		110
+#define __NR_vhangup		111
+#define __NR_idle		112
+#define __NR_vm86old		113
+#define __NR_wait4		114
+#define __NR_swapoff		115
+#define __NR_sysinfo		116
+#define __NR_ipc		117
+#define __NR_fsync		118
+#define __NR_sigreturn		119
+#define __NR_clone		120
+#define __NR_setdomainname	121
+#define __NR_uname		122
+#define __NR_modify_ldt		123
+#define __NR_adjtimex		124
+#define __NR_mprotect		125
+#define __NR_sigprocmask	126
+#define __NR_create_module	127
+#define __NR_init_module	128
+#define __NR_delete_module	129
+#define __NR_get_kernel_syms	130
+#define __NR_quotactl		131
+#define __NR_getpgid		132
+#define __NR_fchdir		133
+#define __NR_bdflush		134
+#define __NR_sysfs		135
+#define __NR_personality	136
+#define __NR_afs_syscall	137 /* Syscall for Andrew File System */
+#define __NR_setfsuid		138
+#define __NR_setfsgid		139
+#define __NR__llseek		140
+#define __NR_getdents		141
+#define __NR__newselect		142
+#define __NR_flock		143
+#define __NR_msync		144
+#define __NR_readv		145
+#define __NR_writev		146
+#define __NR_getsid		147
+#define __NR_fdatasync		148
+#define __NR__sysctl		149
+#define __NR_mlock		150
+#define __NR_munlock		151
+#define __NR_mlockall		152
+#define __NR_munlockall		153
+#define __NR_sched_setparam		154
+#define __NR_sched_getparam		155
+#define __NR_sched_setscheduler		156
+#define __NR_sched_getscheduler		157
+#define __NR_sched_yield		158
+#define __NR_sched_get_priority_max	159
+#define __NR_sched_get_priority_min	160
+#define __NR_sched_rr_get_interval	161
+#define __NR_nanosleep		162
+#define __NR_mremap		163
+#define __NR_setresuid		164
+#define __NR_getresuid		165
+#define __NR_vm86		166
+#define __NR_query_module	167
+#define __NR_poll		168
+#define __NR_nfsservctl		169
+#define __NR_setresgid		170
+#define __NR_getresgid		171
+#define __NR_prctl              172
+#define __NR_rt_sigreturn	173
+#define __NR_rt_sigaction	174
+#define __NR_rt_sigprocmask	175
+#define __NR_rt_sigpending	176
+#define __NR_rt_sigtimedwait	177
+#define __NR_rt_sigqueueinfo	178
+#define __NR_rt_sigsuspend	179
+#define __NR_pread64		180
+#define __NR_pwrite64		181
+#define __NR_chown		182
+#define __NR_getcwd		183
+#define __NR_capget		184
+#define __NR_capset		185
+#define __NR_sigaltstack	186
+#define __NR_sendfile		187
+#define __NR_streams1		188	/* some people actually want it */
+#define __NR_streams2		189	/* some people actually want it */
+#define __NR_vfork		190
+#define __NR_ugetrlimit		191	/* SuS compliant getrlimit */
+#define __NR_mmap2		192
+#define __NR_truncate64		193
+#define __NR_ftruncate64	194
+#define __NR_stat64		195
+#define __NR_lstat64		196
+#define __NR_fstat64		197
+#define __NR_lchown32		198
+#define __NR_getuid32		199
+#define __NR_getgid32		200
+#define __NR_geteuid32		201
+#define __NR_getegid32		202
+#define __NR_setreuid32		203
+#define __NR_setregid32		204
+#define __NR_getgroups32	205
+#define __NR_setgroups32	206
+#define __NR_fchown32		207
+#define __NR_setresuid32	208
+#define __NR_getresuid32	209
+#define __NR_setresgid32	210
+#define __NR_getresgid32	211
+#define __NR_chown32		212
+#define __NR_setuid32		213
+#define __NR_setgid32		214
+#define __NR_setfsuid32		215
+#define __NR_setfsgid32		216
+#define __NR_pivot_root		217
+#define __NR_mincore		218
+#define __NR_madvise		219
+#define __NR_getdents64		220
+#define __NR_fcntl64		221
+/* 223 is unused */
+#define __NR_gettid		224
+#define __NR_readahead		225
+#define __NR_setxattr		226
+#define __NR_lsetxattr		227
+#define __NR_fsetxattr		228
+#define __NR_getxattr		229
+#define __NR_lgetxattr		230
+#define __NR_fgetxattr		231
+#define __NR_listxattr		232
+#define __NR_llistxattr		233
+#define __NR_flistxattr		234
+#define __NR_removexattr	235
+#define __NR_lremovexattr	236
+#define __NR_fremovexattr	237
+#define __NR_tkill		238
+#define __NR_sendfile64		239
+#define __NR_futex		240
+#define __NR_sched_setaffinity	241
+#define __NR_sched_getaffinity	242
+#define __NR_set_thread_area	243
+#define __NR_get_thread_area	244
+#define __NR_io_setup		245
+#define __NR_io_destroy		246
+#define __NR_io_getevents	247
+#define __NR_io_submit		248
+#define __NR_io_cancel		249
+#define __NR_fadvise64		250
+
+#define __NR_exit_group		252
+#define __NR_lookup_dcookie	253
+#define __NR_epoll_create	254
+#define __NR_epoll_ctl		255
+#define __NR_epoll_wait		256
+#define __NR_remap_file_pages	257
+#define __NR_set_tid_address	258
+#define __NR_timer_create	259
+#define __NR_timer_settime	(__NR_timer_create+1)
+#define __NR_timer_gettime	(__NR_timer_create+2)
+#define __NR_timer_getoverrun	(__NR_timer_create+3)
+#define __NR_timer_delete	(__NR_timer_create+4)
+#define __NR_clock_settime	(__NR_timer_create+5)
+#define __NR_clock_gettime	(__NR_timer_create+6)
+#define __NR_clock_getres	(__NR_timer_create+7)
+#define __NR_clock_nanosleep	(__NR_timer_create+8)
+#define __NR_statfs64		268
+#define __NR_fstatfs64		269
+#define __NR_tgkill		270
+#define __NR_utimes		271
+#define __NR_fadvise64_64	272
+#define __NR_vserver		273
+#define __NR_mbind              274
+#define __NR_get_mempolicy      275
+#define __NR_set_mempolicy      276
+#define __NR_mq_open            277
+#define __NR_mq_unlink          (__NR_mq_open+1)
+#define __NR_mq_timedsend       (__NR_mq_open+2)
+#define __NR_mq_timedreceive    (__NR_mq_open+3)
+#define __NR_mq_notify          (__NR_mq_open+4)
+#define __NR_mq_getsetattr      (__NR_mq_open+5)
+#define __NR_kexec_load		283
+#define __NR_waitid		284
+#define __NR_add_key		285
+#define __NR_request_key	286
+#define __NR_keyctl		287
+#define __NR_ioprio_set		288
+#define __NR_ioprio_get		289
+#define __NR_inotify_init	290
+#define __NR_inotify_add_watch	291
+#define __NR_inotify_rm_watch	292
+/* 293 is unused */
+#define __NR_migrate_pages	294
+#define __NR_openat		295
+#define __NR_mkdirat		296
+#define __NR_mknodat		297
+#define __NR_fchownat		298
+#define __NR_futimesat		299
+#define __NR_fstatat64		300
+#define __NR_unlinkat		301
+#define __NR_renameat		302
+#define __NR_linkat		303
+#define __NR_symlinkat		304
+#define __NR_readlinkat		305
+#define __NR_fchmodat		306
+#define __NR_faccessat		307
+#define __NR_pselect6		308
+#define __NR_ppoll		309
+#define __NR_unshare		310
+#define __NR_set_robust_list	311
+#define __NR_get_robust_list	312
+#define __NR_splice		313
+#define __NR_sync_file_range	314
+#define __NR_tee		315
+#define __NR_vmsplice		316
+#define __NR_move_pages		317
+#define __NR_getcpu		318
+#define __NR_epoll_pwait	319
+#define __NR_utimensat		320
+#define __NR_signalfd		321
+#define __NR_timerfd_create	322
+#define __NR_eventfd		323
+#define __NR_fallocate		324
+#define __NR_timerfd_settime	325
+#define __NR_timerfd_gettime	326
+#define __NR_signalfd4		327
+#define __NR_eventfd2		328
+#define __NR_epoll_create1	329
+#define __NR_dup3		330
+#define __NR_pipe2		331
+#define __NR_inotify_init1	332
+
+#define NR_syscalls 333
+
+#ifdef __KERNEL__
+
+#define __ARCH_WANT_IPC_PARSE_VERSION
+#define __ARCH_WANT_OLD_READDIR
+#define __ARCH_WANT_OLD_STAT
+#define __ARCH_WANT_STAT64
+#define __ARCH_WANT_SYS_ALARM
+#define __ARCH_WANT_SYS_GETHOSTNAME
+#define __ARCH_WANT_SYS_PAUSE
+#define __ARCH_WANT_SYS_SGETMASK
+#define __ARCH_WANT_SYS_SIGNAL
+#define __ARCH_WANT_SYS_TIME
+#define __ARCH_WANT_SYS_UTIME
+#define __ARCH_WANT_SYS_WAITPID
+#define __ARCH_WANT_SYS_SOCKETCALL
+#define __ARCH_WANT_SYS_FADVISE64
+#define __ARCH_WANT_SYS_GETPGRP
+#define __ARCH_WANT_SYS_LLSEEK
+#define __ARCH_WANT_SYS_NICE
+#define __ARCH_WANT_SYS_OLD_GETRLIMIT
+#define __ARCH_WANT_SYS_OLDUMOUNT
+#define __ARCH_WANT_SYS_SIGPENDING
+#define __ARCH_WANT_SYS_SIGPROCMASK
+#define __ARCH_WANT_SYS_RT_SIGACTION
+#define __ARCH_WANT_SYS_RT_SIGSUSPEND
+
+/*
+ * "Conditional" syscalls
+ *
+ * What we want is __attribute__((weak,alias("sys_ni_syscall"))),
+ * but it doesn't work on all toolchains, so we just do it by hand
+ */
+#ifndef cond_syscall
+#define cond_syscall(x) asm(".weak\t" #x "\n\t.set\t" #x ",sys_ni_syscall")
+#endif
+
+#endif /* __KERNEL__ */
+#endif /* __ASM_SH_UNISTD_H */
diff --git a/arch/sh/include/asm/unistd_64.h b/arch/sh/include/asm/unistd_64.h
new file mode 100644
index 000000000000..7c54e91753c1
--- /dev/null
+++ b/arch/sh/include/asm/unistd_64.h
@@ -0,0 +1,423 @@
+#ifndef __ASM_SH_UNISTD_64_H
+#define __ASM_SH_UNISTD_64_H
+
+/*
+ * include/asm-sh/unistd_64.h
+ *
+ * This file contains the system call numbers.
+ *
+ * Copyright (C) 2000, 2001  Paolo Alberelli
+ * Copyright (C) 2003 - 2007 Paul Mundt
+ * Copyright (C) 2004  Sean McGoogan
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#define __NR_restart_syscall	  0
+#define __NR_exit		  1
+#define __NR_fork		  2
+#define __NR_read		  3
+#define __NR_write		  4
+#define __NR_open		  5
+#define __NR_close		  6
+#define __NR_waitpid		  7
+#define __NR_creat		  8
+#define __NR_link		  9
+#define __NR_unlink		 10
+#define __NR_execve		 11
+#define __NR_chdir		 12
+#define __NR_time		 13
+#define __NR_mknod		 14
+#define __NR_chmod		 15
+#define __NR_lchown		 16
+#define __NR_break		 17
+#define __NR_oldstat		 18
+#define __NR_lseek		 19
+#define __NR_getpid		 20
+#define __NR_mount		 21
+#define __NR_umount		 22
+#define __NR_setuid		 23
+#define __NR_getuid		 24
+#define __NR_stime		 25
+#define __NR_ptrace		 26
+#define __NR_alarm		 27
+#define __NR_oldfstat		 28
+#define __NR_pause		 29
+#define __NR_utime		 30
+#define __NR_stty		 31
+#define __NR_gtty		 32
+#define __NR_access		 33
+#define __NR_nice		 34
+#define __NR_ftime		 35
+#define __NR_sync		 36
+#define __NR_kill		 37
+#define __NR_rename		 38
+#define __NR_mkdir		 39
+#define __NR_rmdir		 40
+#define __NR_dup		 41
+#define __NR_pipe		 42
+#define __NR_times		 43
+#define __NR_prof		 44
+#define __NR_brk		 45
+#define __NR_setgid		 46
+#define __NR_getgid		 47
+#define __NR_signal		 48
+#define __NR_geteuid		 49
+#define __NR_getegid		 50
+#define __NR_acct		 51
+#define __NR_umount2		 52
+#define __NR_lock		 53
+#define __NR_ioctl		 54
+#define __NR_fcntl		 55
+#define __NR_mpx		 56
+#define __NR_setpgid		 57
+#define __NR_ulimit		 58
+#define __NR_oldolduname	 59
+#define __NR_umask		 60
+#define __NR_chroot		 61
+#define __NR_ustat		 62
+#define __NR_dup2		 63
+#define __NR_getppid		 64
+#define __NR_getpgrp		 65
+#define __NR_setsid		 66
+#define __NR_sigaction		 67
+#define __NR_sgetmask		 68
+#define __NR_ssetmask		 69
+#define __NR_setreuid		 70
+#define __NR_setregid		 71
+#define __NR_sigsuspend		 72
+#define __NR_sigpending		 73
+#define __NR_sethostname	 74
+#define __NR_setrlimit		 75
+#define __NR_getrlimit		 76	/* Back compatible 2Gig limited rlimit */
+#define __NR_getrusage		 77
+#define __NR_gettimeofday	 78
+#define __NR_settimeofday	 79
+#define __NR_getgroups		 80
+#define __NR_setgroups		 81
+#define __NR_select		 82
+#define __NR_symlink		 83
+#define __NR_oldlstat		 84
+#define __NR_readlink		 85
+#define __NR_uselib		 86
+#define __NR_swapon		 87
+#define __NR_reboot		 88
+#define __NR_readdir		 89
+#define __NR_mmap		 90
+#define __NR_munmap		 91
+#define __NR_truncate		 92
+#define __NR_ftruncate		 93
+#define __NR_fchmod		 94
+#define __NR_fchown		 95
+#define __NR_getpriority	 96
+#define __NR_setpriority	 97
+#define __NR_profil		 98
+#define __NR_statfs		 99
+#define __NR_fstatfs		100
+#define __NR_ioperm		101
+#define __NR_socketcall		102	/* old implementation of socket systemcall */
+#define __NR_syslog		103
+#define __NR_setitimer		104
+#define __NR_getitimer		105
+#define __NR_stat		106
+#define __NR_lstat		107
+#define __NR_fstat		108
+#define __NR_olduname		109
+#define __NR_iopl		110
+#define __NR_vhangup		111
+#define __NR_idle		112
+#define __NR_vm86old		113
+#define __NR_wait4		114
+#define __NR_swapoff		115
+#define __NR_sysinfo		116
+#define __NR_ipc		117
+#define __NR_fsync		118
+#define __NR_sigreturn		119
+#define __NR_clone		120
+#define __NR_setdomainname	121
+#define __NR_uname		122
+#define __NR_modify_ldt		123
+#define __NR_adjtimex		124
+#define __NR_mprotect		125
+#define __NR_sigprocmask	126
+#define __NR_create_module	127
+#define __NR_init_module	128
+#define __NR_delete_module	129
+#define __NR_get_kernel_syms	130
+#define __NR_quotactl		131
+#define __NR_getpgid		132
+#define __NR_fchdir		133
+#define __NR_bdflush		134
+#define __NR_sysfs		135
+#define __NR_personality	136
+#define __NR_afs_syscall	137 /* Syscall for Andrew File System */
+#define __NR_setfsuid		138
+#define __NR_setfsgid		139
+#define __NR__llseek		140
+#define __NR_getdents		141
+#define __NR__newselect		142
+#define __NR_flock		143
+#define __NR_msync		144
+#define __NR_readv		145
+#define __NR_writev		146
+#define __NR_getsid		147
+#define __NR_fdatasync		148
+#define __NR__sysctl		149
+#define __NR_mlock		150
+#define __NR_munlock		151
+#define __NR_mlockall		152
+#define __NR_munlockall		153
+#define __NR_sched_setparam		154
+#define __NR_sched_getparam		155
+#define __NR_sched_setscheduler		156
+#define __NR_sched_getscheduler		157
+#define __NR_sched_yield		158
+#define __NR_sched_get_priority_max	159
+#define __NR_sched_get_priority_min	160
+#define __NR_sched_rr_get_interval	161
+#define __NR_nanosleep		162
+#define __NR_mremap		163
+#define __NR_setresuid		164
+#define __NR_getresuid		165
+#define __NR_vm86		166
+#define __NR_query_module	167
+#define __NR_poll		168
+#define __NR_nfsservctl		169
+#define __NR_setresgid		170
+#define __NR_getresgid		171
+#define __NR_prctl              172
+#define __NR_rt_sigreturn	173
+#define __NR_rt_sigaction	174
+#define __NR_rt_sigprocmask	175
+#define __NR_rt_sigpending	176
+#define __NR_rt_sigtimedwait	177
+#define __NR_rt_sigqueueinfo	178
+#define __NR_rt_sigsuspend	179
+#define __NR_pread64		180
+#define __NR_pwrite64		181
+#define __NR_chown		182
+#define __NR_getcwd		183
+#define __NR_capget		184
+#define __NR_capset		185
+#define __NR_sigaltstack	186
+#define __NR_sendfile		187
+#define __NR_streams1		188	/* some people actually want it */
+#define __NR_streams2		189	/* some people actually want it */
+#define __NR_vfork		190
+#define __NR_ugetrlimit		191	/* SuS compliant getrlimit */
+#define __NR_mmap2		192
+#define __NR_truncate64		193
+#define __NR_ftruncate64	194
+#define __NR_stat64		195
+#define __NR_lstat64		196
+#define __NR_fstat64		197
+#define __NR_lchown32		198
+#define __NR_getuid32		199
+#define __NR_getgid32		200
+#define __NR_geteuid32		201
+#define __NR_getegid32		202
+#define __NR_setreuid32		203
+#define __NR_setregid32		204
+#define __NR_getgroups32	205
+#define __NR_setgroups32	206
+#define __NR_fchown32		207
+#define __NR_setresuid32	208
+#define __NR_getresuid32	209
+#define __NR_setresgid32	210
+#define __NR_getresgid32	211
+#define __NR_chown32		212
+#define __NR_setuid32		213
+#define __NR_setgid32		214
+#define __NR_setfsuid32		215
+#define __NR_setfsgid32		216
+#define __NR_pivot_root		217
+#define __NR_mincore		218
+#define __NR_madvise		219
+
+/* Non-multiplexed socket family */
+#define __NR_socket		220
+#define __NR_bind		221
+#define __NR_connect		222
+#define __NR_listen		223
+#define __NR_accept		224
+#define __NR_getsockname	225
+#define __NR_getpeername	226
+#define __NR_socketpair		227
+#define __NR_send		228
+#define __NR_sendto		229
+#define __NR_recv		230
+#define __NR_recvfrom		231
+#define __NR_shutdown		232
+#define __NR_setsockopt		233
+#define __NR_getsockopt		234
+#define __NR_sendmsg		235
+#define __NR_recvmsg		236
+
+/* Non-multiplexed IPC family */
+#define __NR_semop		237
+#define __NR_semget		238
+#define __NR_semctl		239
+#define __NR_msgsnd		240
+#define __NR_msgrcv		241
+#define __NR_msgget		242
+#define __NR_msgctl		243
+#if 0
+#define __NR_shmatcall		244
+#endif
+#define __NR_shmdt		245
+#define __NR_shmget		246
+#define __NR_shmctl		247
+
+#define __NR_getdents64		248
+#define __NR_fcntl64		249
+/* 223 is unused */
+#define __NR_gettid		252
+#define __NR_readahead		253
+#define __NR_setxattr		254
+#define __NR_lsetxattr		255
+#define __NR_fsetxattr		256
+#define __NR_getxattr		257
+#define __NR_lgetxattr		258
+#define __NR_fgetxattr		269
+#define __NR_listxattr		260
+#define __NR_llistxattr		261
+#define __NR_flistxattr		262
+#define __NR_removexattr	263
+#define __NR_lremovexattr	264
+#define __NR_fremovexattr	265
+#define __NR_tkill		266
+#define __NR_sendfile64		267
+#define __NR_futex		268
+#define __NR_sched_setaffinity	269
+#define __NR_sched_getaffinity	270
+#define __NR_set_thread_area	271
+#define __NR_get_thread_area	272
+#define __NR_io_setup		273
+#define __NR_io_destroy		274
+#define __NR_io_getevents	275
+#define __NR_io_submit		276
+#define __NR_io_cancel		277
+#define __NR_fadvise64		278
+#define __NR_exit_group		280
+
+#define __NR_lookup_dcookie	281
+#define __NR_epoll_create	282
+#define __NR_epoll_ctl		283
+#define __NR_epoll_wait		284
+#define __NR_remap_file_pages	285
+#define __NR_set_tid_address	286
+#define __NR_timer_create	287
+#define __NR_timer_settime	(__NR_timer_create+1)
+#define __NR_timer_gettime	(__NR_timer_create+2)
+#define __NR_timer_getoverrun	(__NR_timer_create+3)
+#define __NR_timer_delete	(__NR_timer_create+4)
+#define __NR_clock_settime	(__NR_timer_create+5)
+#define __NR_clock_gettime	(__NR_timer_create+6)
+#define __NR_clock_getres	(__NR_timer_create+7)
+#define __NR_clock_nanosleep	(__NR_timer_create+8)
+#define __NR_statfs64		296
+#define __NR_fstatfs64		297
+#define __NR_tgkill		298
+#define __NR_utimes		299
+#define __NR_fadvise64_64	300
+#define __NR_vserver		301
+#define __NR_mbind              302
+#define __NR_get_mempolicy      303
+#define __NR_set_mempolicy      304
+#define __NR_mq_open            305
+#define __NR_mq_unlink          (__NR_mq_open+1)
+#define __NR_mq_timedsend       (__NR_mq_open+2)
+#define __NR_mq_timedreceive    (__NR_mq_open+3)
+#define __NR_mq_notify          (__NR_mq_open+4)
+#define __NR_mq_getsetattr      (__NR_mq_open+5)
+#define __NR_kexec_load		311
+#define __NR_waitid		312
+#define __NR_add_key		313
+#define __NR_request_key	314
+#define __NR_keyctl		315
+#define __NR_ioprio_set		316
+#define __NR_ioprio_get		317
+#define __NR_inotify_init	318
+#define __NR_inotify_add_watch	319
+#define __NR_inotify_rm_watch	320
+/* 321 is unused */
+#define __NR_migrate_pages	322
+#define __NR_openat		323
+#define __NR_mkdirat		324
+#define __NR_mknodat		325
+#define __NR_fchownat		326
+#define __NR_futimesat		327
+#define __NR_fstatat64		328
+#define __NR_unlinkat		329
+#define __NR_renameat		330
+#define __NR_linkat		331
+#define __NR_symlinkat		332
+#define __NR_readlinkat		333
+#define __NR_fchmodat		334
+#define __NR_faccessat		335
+#define __NR_pselect6		336
+#define __NR_ppoll		337
+#define __NR_unshare		338
+#define __NR_set_robust_list	339
+#define __NR_get_robust_list	340
+#define __NR_splice		341
+#define __NR_sync_file_range	342
+#define __NR_tee		343
+#define __NR_vmsplice		344
+#define __NR_move_pages		345
+#define __NR_getcpu		346
+#define __NR_epoll_pwait	347
+#define __NR_utimensat		348
+#define __NR_signalfd		349
+#define __NR_timerfd_create	350
+#define __NR_eventfd		351
+#define __NR_fallocate		352
+#define __NR_timerfd_settime	353
+#define __NR_timerfd_gettime	354
+#define __NR_signalfd4		355
+#define __NR_eventfd2		356
+#define __NR_epoll_create1	357
+#define __NR_dup3		358
+#define __NR_pipe2		359
+#define __NR_inotify_init1	360
+
+#ifdef __KERNEL__
+
+#define NR_syscalls 361
+
+#define __ARCH_WANT_IPC_PARSE_VERSION
+#define __ARCH_WANT_OLD_READDIR
+#define __ARCH_WANT_OLD_STAT
+#define __ARCH_WANT_STAT64
+#define __ARCH_WANT_SYS_ALARM
+#define __ARCH_WANT_SYS_GETHOSTNAME
+#define __ARCH_WANT_SYS_PAUSE
+#define __ARCH_WANT_SYS_SGETMASK
+#define __ARCH_WANT_SYS_SIGNAL
+#define __ARCH_WANT_SYS_TIME
+#define __ARCH_WANT_SYS_UTIME
+#define __ARCH_WANT_SYS_WAITPID
+#define __ARCH_WANT_SYS_SOCKETCALL
+#define __ARCH_WANT_SYS_FADVISE64
+#define __ARCH_WANT_SYS_GETPGRP
+#define __ARCH_WANT_SYS_LLSEEK
+#define __ARCH_WANT_SYS_NICE
+#define __ARCH_WANT_SYS_OLD_GETRLIMIT
+#define __ARCH_WANT_SYS_OLDUMOUNT
+#define __ARCH_WANT_SYS_SIGPENDING
+#define __ARCH_WANT_SYS_SIGPROCMASK
+#define __ARCH_WANT_SYS_RT_SIGACTION
+
+/*
+ * "Conditional" syscalls
+ *
+ * What we want is __attribute__((weak,alias("sys_ni_syscall"))),
+ * but it doesn't work on all toolchains, so we just do it by hand
+ */
+#ifndef cond_syscall
+#define cond_syscall(x) asm(".weak\t" #x "\n\t.set\t" #x ",sys_ni_syscall")
+#endif
+
+#endif /* __KERNEL__ */
+#endif /* __ASM_SH_UNISTD_64_H */
diff --git a/include/asm-sh/user.h b/arch/sh/include/asm/user.h
index 8fd3cf6c58d4..8fd3cf6c58d4 100644
--- a/include/asm-sh/user.h
+++ b/arch/sh/include/asm/user.h
diff --git a/include/asm-sh/vga.h b/arch/sh/include/asm/vga.h
index 06a5de8ace1a..06a5de8ace1a 100644
--- a/include/asm-sh/vga.h
+++ b/arch/sh/include/asm/vga.h
diff --git a/arch/sh/include/asm/watchdog.h b/arch/sh/include/asm/watchdog.h
new file mode 100644
index 000000000000..f024fed00a72
--- /dev/null
+++ b/arch/sh/include/asm/watchdog.h
@@ -0,0 +1,107 @@
+/*
+ * include/asm-sh/watchdog.h
+ *
+ * Copyright (C) 2002, 2003 Paul Mundt
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+#ifndef __ASM_SH_WATCHDOG_H
+#define __ASM_SH_WATCHDOG_H
+#ifdef __KERNEL__
+
+#include <linux/types.h>
+#include <cpu/watchdog.h>
+#include <asm/io.h>
+
+/* 
+ * See cpu-sh2/watchdog.h for explanation of this stupidity..
+ */
+#ifndef WTCNT_R
+#  define WTCNT_R	WTCNT
+#endif
+
+#ifndef WTCSR_R
+#  define WTCSR_R	WTCSR
+#endif
+
+#define WTCNT_HIGH	0x5a
+#define WTCSR_HIGH	0xa5
+
+#define WTCSR_CKS2	0x04
+#define WTCSR_CKS1	0x02
+#define WTCSR_CKS0	0x01
+
+/*
+ * CKS0-2 supports a number of clock division ratios. At the time the watchdog
+ * is enabled, it defaults to a 41 usec overflow period .. we overload this to
+ * something a little more reasonable, and really can't deal with anything
+ * lower than WTCSR_CKS_1024, else we drop back into the usec range.
+ *
+ * Clock Division Ratio         Overflow Period
+ * --------------------------------------------
+ *     1/32 (initial value)       41 usecs
+ *     1/64                       82 usecs
+ *     1/128                     164 usecs
+ *     1/256                     328 usecs
+ *     1/512                     656 usecs
+ *     1/1024                   1.31 msecs
+ *     1/2048                   2.62 msecs
+ *     1/4096                   5.25 msecs
+ */
+#define WTCSR_CKS_32	0x00
+#define WTCSR_CKS_64	0x01
+#define WTCSR_CKS_128	0x02
+#define WTCSR_CKS_256	0x03
+#define WTCSR_CKS_512	0x04
+#define WTCSR_CKS_1024	0x05
+#define WTCSR_CKS_2048	0x06
+#define WTCSR_CKS_4096	0x07
+
+/**
+ * 	sh_wdt_read_cnt - Read from Counter
+ * 	Reads back the WTCNT value.
+ */
+static inline __u8 sh_wdt_read_cnt(void)
+{
+	return ctrl_inb(WTCNT_R);
+}
+
+/**
+ *	sh_wdt_write_cnt - Write to Counter
+ *	@val: Value to write
+ *
+ *	Writes the given value @val to the lower byte of the timer counter.
+ *	The upper byte is set manually on each write.
+ */
+static inline void sh_wdt_write_cnt(__u8 val)
+{
+	ctrl_outw((WTCNT_HIGH << 8) | (__u16)val, WTCNT);
+}
+
+/**
+ * 	sh_wdt_read_csr - Read from Control/Status Register
+ *
+ *	Reads back the WTCSR value.
+ */
+static inline __u8 sh_wdt_read_csr(void)
+{
+	return ctrl_inb(WTCSR_R);
+}
+
+/**
+ * 	sh_wdt_write_csr - Write to Control/Status Register
+ * 	@val: Value to write
+ *
+ * 	Writes the given value @val to the lower byte of the control/status
+ * 	register. The upper byte is set manually on each write.
+ */
+static inline void sh_wdt_write_csr(__u8 val)
+{
+	ctrl_outw((WTCSR_HIGH << 8) | (__u16)val, WTCSR);
+}
+
+#endif /* __KERNEL__ */
+#endif /* __ASM_SH_WATCHDOG_H */
diff --git a/include/asm-sh/xor.h b/arch/sh/include/asm/xor.h
index c82eb12a5b18..c82eb12a5b18 100644
--- a/include/asm-sh/xor.h
+++ b/arch/sh/include/asm/xor.h
diff --git a/include/asm-sh/cpu-sh2/addrspace.h b/arch/sh/include/cpu-common/cpu/addrspace.h
index 2b9ab93efa4e..2b9ab93efa4e 100644
--- a/include/asm-sh/cpu-sh2/addrspace.h
+++ b/arch/sh/include/cpu-common/cpu/addrspace.h
diff --git a/arch/sh/include/cpu-common/cpu/cacheflush.h b/arch/sh/include/cpu-common/cpu/cacheflush.h
new file mode 100644
index 000000000000..c3db00b73605
--- /dev/null
+++ b/arch/sh/include/cpu-common/cpu/cacheflush.h
@@ -0,0 +1,44 @@
+/*
+ * include/asm-sh/cpu-sh2/cacheflush.h
+ *
+ * Copyright (C) 2003 Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#ifndef __ASM_CPU_SH2_CACHEFLUSH_H
+#define __ASM_CPU_SH2_CACHEFLUSH_H
+
+/*
+ * Cache flushing:
+ *
+ *  - flush_cache_all() flushes entire cache
+ *  - flush_cache_mm(mm) flushes the specified mm context's cache lines
+ *  - flush_cache_dup mm(mm) handles cache flushing when forking
+ *  - flush_cache_page(mm, vmaddr, pfn) flushes a single page
+ *  - flush_cache_range(vma, start, end) flushes a range of pages
+ *
+ *  - flush_dcache_page(pg) flushes(wback&invalidates) a page for dcache
+ *  - flush_icache_range(start, end) flushes(invalidates) a range for icache
+ *  - flush_icache_page(vma, pg) flushes(invalidates) a page for icache
+ *
+ *  Caches are indexed (effectively) by physical address on SH-2, so
+ *  we don't need them.
+ */
+#define flush_cache_all()			do { } while (0)
+#define flush_cache_mm(mm)			do { } while (0)
+#define flush_cache_dup_mm(mm)			do { } while (0)
+#define flush_cache_range(vma, start, end)	do { } while (0)
+#define flush_cache_page(vma, vmaddr, pfn)	do { } while (0)
+#define flush_dcache_page(page)			do { } while (0)
+#define flush_dcache_mmap_lock(mapping)		do { } while (0)
+#define flush_dcache_mmap_unlock(mapping)	do { } while (0)
+#define flush_icache_range(start, end)		do { } while (0)
+#define flush_icache_page(vma,pg)		do { } while (0)
+#define flush_icache_user_range(vma,pg,adr,len)	do { } while (0)
+#define flush_cache_sigtramp(vaddr)		do { } while (0)
+
+#define p3_cache_init()				do { } while (0)
+
+#endif /* __ASM_CPU_SH2_CACHEFLUSH_H */
diff --git a/include/asm-sh/cpu-sh2/mmu_context.h b/arch/sh/include/cpu-common/cpu/mmu_context.h
index beeb299e01ec..beeb299e01ec 100644
--- a/include/asm-sh/cpu-sh2/mmu_context.h
+++ b/arch/sh/include/cpu-common/cpu/mmu_context.h
diff --git a/include/asm-sh/cpu-sh2/rtc.h b/arch/sh/include/cpu-common/cpu/rtc.h
index 39e2d6e94782..39e2d6e94782 100644
--- a/include/asm-sh/cpu-sh2/rtc.h
+++ b/arch/sh/include/cpu-common/cpu/rtc.h
diff --git a/include/asm-sh/cpu-sh2/sigcontext.h b/arch/sh/include/cpu-common/cpu/sigcontext.h
index fe5c15dd6e87..fe5c15dd6e87 100644
--- a/include/asm-sh/cpu-sh2/sigcontext.h
+++ b/arch/sh/include/cpu-common/cpu/sigcontext.h
diff --git a/include/asm-sh/cpu-sh2/timer.h b/arch/sh/include/cpu-common/cpu/timer.h
index a39c241e8195..a39c241e8195 100644
--- a/include/asm-sh/cpu-sh2/timer.h
+++ b/arch/sh/include/cpu-common/cpu/timer.h
diff --git a/arch/sh/include/cpu-sh2/cpu/cache.h b/arch/sh/include/cpu-sh2/cpu/cache.h
new file mode 100644
index 000000000000..673515bc4135
--- /dev/null
+++ b/arch/sh/include/cpu-sh2/cpu/cache.h
@@ -0,0 +1,43 @@
+/*
+ * include/asm-sh/cpu-sh2/cache.h
+ *
+ * Copyright (C) 2003 Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#ifndef __ASM_CPU_SH2_CACHE_H
+#define __ASM_CPU_SH2_CACHE_H
+
+#define L1_CACHE_SHIFT	4
+
+#define SH_CACHE_VALID		1
+#define SH_CACHE_UPDATED	2
+#define SH_CACHE_COMBINED	4
+#define SH_CACHE_ASSOC		8
+
+#if defined(CONFIG_CPU_SUBTYPE_SH7619)
+#define CCR		0xffffffec
+
+#define CCR_CACHE_CE	0x01	/* Cache enable */
+#define CCR_CACHE_WT	0x02    /* CCR[bit1=1,bit2=1] */
+				/* 0x00000000-0x7fffffff: Write-through  */
+				/* 0x80000000-0x9fffffff: Write-back     */
+                                /* 0xc0000000-0xdfffffff: Write-through  */
+#define CCR_CACHE_CB	0x04    /* CCR[bit1=0,bit2=0] */
+				/* 0x00000000-0x7fffffff: Write-back     */
+				/* 0x80000000-0x9fffffff: Write-through  */
+                                /* 0xc0000000-0xdfffffff: Write-back     */
+#define CCR_CACHE_CF	0x08	/* Cache invalidate */
+
+#define CACHE_OC_ADDRESS_ARRAY	0xf0000000
+#define CACHE_OC_DATA_ARRAY	0xf1000000
+
+#define CCR_CACHE_ENABLE	CCR_CACHE_CE
+#define CCR_CACHE_INVALIDATE	CCR_CACHE_CF
+#define CACHE_PHYSADDR_MASK	0x1ffffc00
+
+#endif
+
+#endif /* __ASM_CPU_SH2_CACHE_H */
diff --git a/include/asm-sh/cpu-sh2/dma.h b/arch/sh/include/cpu-sh2/cpu/dma.h
index d66b43cdc637..d66b43cdc637 100644
--- a/include/asm-sh/cpu-sh2/dma.h
+++ b/arch/sh/include/cpu-sh2/cpu/dma.h
diff --git a/include/asm-sh/cpu-sh2/freq.h b/arch/sh/include/cpu-sh2/cpu/freq.h
index 31de475da70b..31de475da70b 100644
--- a/include/asm-sh/cpu-sh2/freq.h
+++ b/arch/sh/include/cpu-sh2/cpu/freq.h
diff --git a/include/asm-sh/cpu-sh2/ubc.h b/arch/sh/include/cpu-sh2/cpu/ubc.h
index ba0e87f19c7a..ba0e87f19c7a 100644
--- a/include/asm-sh/cpu-sh2/ubc.h
+++ b/arch/sh/include/cpu-sh2/cpu/ubc.h
diff --git a/include/asm-sh/cpu-sh2/watchdog.h b/arch/sh/include/cpu-sh2/cpu/watchdog.h
index 393161c9c6d0..393161c9c6d0 100644
--- a/include/asm-sh/cpu-sh2/watchdog.h
+++ b/arch/sh/include/cpu-sh2/cpu/watchdog.h
diff --git a/arch/sh/include/cpu-sh2a/cpu/addrspace.h b/arch/sh/include/cpu-sh2a/cpu/addrspace.h
new file mode 100644
index 000000000000..31eb4b58aa6d
--- /dev/null
+++ b/arch/sh/include/cpu-sh2a/cpu/addrspace.h
@@ -0,0 +1,10 @@
+#ifndef __ASM_SH_CPU_SH2A_ADDRSPACE_H
+#define __ASM_SH_CPU_SH2A_ADDRSPACE_H
+
+#define P0SEG		0x00000000
+#define P1SEG		0x00000000
+#define P2SEG		0x20000000
+#define P3SEG		0x40000000
+#define P4SEG		0x60000000
+
+#endif /* __ASM_SH_CPU_SH2A_ADDRSPACE_H */
diff --git a/arch/sh/include/cpu-sh2a/cpu/cache.h b/arch/sh/include/cpu-sh2a/cpu/cache.h
new file mode 100644
index 000000000000..defb0baa5a06
--- /dev/null
+++ b/arch/sh/include/cpu-sh2a/cpu/cache.h
@@ -0,0 +1,43 @@
+/*
+ * include/asm-sh/cpu-sh2a/cache.h
+ *
+ * Copyright (C) 2004 Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#ifndef __ASM_CPU_SH2A_CACHE_H
+#define __ASM_CPU_SH2A_CACHE_H
+
+#define L1_CACHE_SHIFT	4
+
+#define SH_CACHE_VALID		1
+#define SH_CACHE_UPDATED	2
+#define SH_CACHE_COMBINED	4
+#define SH_CACHE_ASSOC		8
+
+#define CCR		0xfffc1000 /* CCR1 */
+#define CCR2		0xfffc1004
+
+/*
+ * Most of the SH-2A CCR1 definitions resemble the SH-4 ones. All others not
+ * listed here are reserved.
+ */
+#define CCR_CACHE_CB	0x0000	/* Hack */
+#define CCR_CACHE_OCE	0x0001
+#define CCR_CACHE_WT	0x0002
+#define CCR_CACHE_OCI	0x0008	/* OCF */
+#define CCR_CACHE_ICE	0x0100
+#define CCR_CACHE_ICI	0x0800	/* ICF */
+
+#define CACHE_IC_ADDRESS_ARRAY	0xf0000000
+#define CACHE_OC_ADDRESS_ARRAY	0xf0800000
+
+#define CCR_CACHE_ENABLE	(CCR_CACHE_OCE | CCR_CACHE_ICE)
+#define CCR_CACHE_INVALIDATE	(CCR_CACHE_OCI | CCR_CACHE_ICI)
+#define CCR_ICACHE_INVALIDATE	CCR_CACHE_ICI
+#define CCR_OCACHE_INVALIDATE	CCR_CACHE_OCI
+#define CACHE_PHYSADDR_MASK	0x1ffffc00
+
+#endif /* __ASM_CPU_SH2A_CACHE_H */
diff --git a/arch/sh/include/cpu-sh2a/cpu/cacheflush.h b/arch/sh/include/cpu-sh2a/cpu/cacheflush.h
new file mode 100644
index 000000000000..3d3b9205d2ac
--- /dev/null
+++ b/arch/sh/include/cpu-sh2a/cpu/cacheflush.h
@@ -0,0 +1,34 @@
+#ifndef __ASM_CPU_SH2A_CACHEFLUSH_H
+#define __ASM_CPU_SH2A_CACHEFLUSH_H
+
+/* 
+ * Cache flushing:
+ *
+ *  - flush_cache_all() flushes entire cache
+ *  - flush_cache_mm(mm) flushes the specified mm context's cache lines
+ *  - flush_cache_dup mm(mm) handles cache flushing when forking
+ *  - flush_cache_page(mm, vmaddr, pfn) flushes a single page
+ *  - flush_cache_range(vma, start, end) flushes a range of pages
+ *
+ *  - flush_dcache_page(pg) flushes(wback&invalidates) a page for dcache
+ *  - flush_icache_range(start, end) flushes(invalidates) a range for icache
+ *  - flush_icache_page(vma, pg) flushes(invalidates) a page for icache
+ *
+ *  Caches are indexed (effectively) by physical address on SH-2, so
+ *  we don't need them.
+ */
+#define flush_cache_all()			do { } while (0)
+#define flush_cache_mm(mm)			do { } while (0)
+#define flush_cache_dup_mm(mm)			do { } while (0)
+#define flush_cache_range(vma, start, end)	do { } while (0)
+#define flush_cache_page(vma, vmaddr, pfn)	do { } while (0)
+#define flush_dcache_page(page)			do { } while (0)
+#define flush_dcache_mmap_lock(mapping)		do { } while (0)
+#define flush_dcache_mmap_unlock(mapping)	do { } while (0)
+void flush_icache_range(unsigned long start, unsigned long end);
+#define flush_icache_page(vma,pg)		do { } while (0)
+#define flush_icache_user_range(vma,pg,adr,len)	do { } while (0)
+#define flush_cache_sigtramp(vaddr)		do { } while (0)
+
+#define p3_cache_init()				do { } while (0)
+#endif /* __ASM_CPU_SH2A_CACHEFLUSH_H */
diff --git a/arch/sh/include/cpu-sh2a/cpu/dma.h b/arch/sh/include/cpu-sh2a/cpu/dma.h
new file mode 100644
index 000000000000..27a13ef4fdfc
--- /dev/null
+++ b/arch/sh/include/cpu-sh2a/cpu/dma.h
@@ -0,0 +1 @@
+#include <cpu-sh2/cpu/dma.h>
diff --git a/include/asm-sh/cpu-sh2a/freq.h b/arch/sh/include/cpu-sh2a/cpu/freq.h
index 830fd43b6cdc..830fd43b6cdc 100644
--- a/include/asm-sh/cpu-sh2a/freq.h
+++ b/arch/sh/include/cpu-sh2a/cpu/freq.h
diff --git a/include/asm-sh/cpu-sh2a/rtc.h b/arch/sh/include/cpu-sh2a/cpu/rtc.h
index afb511e2bed7..afb511e2bed7 100644
--- a/include/asm-sh/cpu-sh2a/rtc.h
+++ b/arch/sh/include/cpu-sh2a/cpu/rtc.h
diff --git a/arch/sh/include/cpu-sh2a/cpu/ubc.h b/arch/sh/include/cpu-sh2a/cpu/ubc.h
new file mode 100644
index 000000000000..8ce2fc1cf625
--- /dev/null
+++ b/arch/sh/include/cpu-sh2a/cpu/ubc.h
@@ -0,0 +1 @@
+#include <cpu-sh2/cpu/ubc.h>
diff --git a/arch/sh/include/cpu-sh2a/cpu/watchdog.h b/arch/sh/include/cpu-sh2a/cpu/watchdog.h
new file mode 100644
index 000000000000..e7e8259e468c
--- /dev/null
+++ b/arch/sh/include/cpu-sh2a/cpu/watchdog.h
@@ -0,0 +1 @@
+#include <cpu-sh2/cpu/watchdog.h>
diff --git a/include/asm-sh/cpu-sh3/adc.h b/arch/sh/include/cpu-sh3/cpu/adc.h
index b289e3ca19a6..b289e3ca19a6 100644
--- a/include/asm-sh/cpu-sh3/adc.h
+++ b/arch/sh/include/cpu-sh3/cpu/adc.h
diff --git a/include/asm-sh/cpu-sh3/cache.h b/arch/sh/include/cpu-sh3/cpu/cache.h
index bee2d81c56bf..bee2d81c56bf 100644
--- a/include/asm-sh/cpu-sh3/cache.h
+++ b/arch/sh/include/cpu-sh3/cpu/cache.h
diff --git a/arch/sh/include/cpu-sh3/cpu/cacheflush.h b/arch/sh/include/cpu-sh3/cpu/cacheflush.h
new file mode 100644
index 000000000000..1ac27aae6700
--- /dev/null
+++ b/arch/sh/include/cpu-sh3/cpu/cacheflush.h
@@ -0,0 +1,46 @@
+/*
+ * include/asm-sh/cpu-sh3/cacheflush.h
+ *
+ * Copyright (C) 1999 Niibe Yutaka
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#ifndef __ASM_CPU_SH3_CACHEFLUSH_H
+#define __ASM_CPU_SH3_CACHEFLUSH_H
+
+#if defined(CONFIG_SH7705_CACHE_32KB)
+/* SH7705 is an SH3 processor with 32KB cache. This has alias issues like the
+ * SH4. Unlike the SH4 this is a unified cache so we need to do some work
+ * in mmap when 'exec'ing a new binary
+ */
+ /* 32KB cache, 4kb PAGE sizes need to check bit 12 */
+#define CACHE_ALIAS 0x00001000
+
+#define PG_mapped	PG_arch_1
+
+void flush_cache_all(void);
+void flush_cache_mm(struct mm_struct *mm);
+#define flush_cache_dup_mm(mm) flush_cache_mm(mm)
+void flush_cache_range(struct vm_area_struct *vma, unsigned long start,
+                              unsigned long end);
+void flush_cache_page(struct vm_area_struct *vma, unsigned long addr, unsigned long pfn);
+void flush_dcache_page(struct page *pg);
+void flush_icache_range(unsigned long start, unsigned long end);
+void flush_icache_page(struct vm_area_struct *vma, struct page *page);
+
+#define flush_dcache_mmap_lock(mapping)		do { } while (0)
+#define flush_dcache_mmap_unlock(mapping)	do { } while (0)
+
+/* SH3 has unified cache so no special action needed here */
+#define flush_cache_sigtramp(vaddr)		do { } while (0)
+#define flush_icache_user_range(vma,pg,adr,len)	do { } while (0)
+
+#define p3_cache_init()				do { } while (0)
+
+#else
+#include <cpu-common/cpu/cacheflush.h>
+#endif
+
+#endif /* __ASM_CPU_SH3_CACHEFLUSH_H */
diff --git a/include/asm-sh/cpu-sh3/dac.h b/arch/sh/include/cpu-sh3/cpu/dac.h
index 05fda8316ebc..05fda8316ebc 100644
--- a/include/asm-sh/cpu-sh3/dac.h
+++ b/arch/sh/include/cpu-sh3/cpu/dac.h
diff --git a/include/asm-sh/cpu-sh3/dma.h b/arch/sh/include/cpu-sh3/cpu/dma.h
index 6813c3220a1d..6813c3220a1d 100644
--- a/include/asm-sh/cpu-sh3/dma.h
+++ b/arch/sh/include/cpu-sh3/cpu/dma.h
diff --git a/include/asm-sh/cpu-sh3/freq.h b/arch/sh/include/cpu-sh3/cpu/freq.h
index 53c62302b2e3..53c62302b2e3 100644
--- a/include/asm-sh/cpu-sh3/freq.h
+++ b/arch/sh/include/cpu-sh3/cpu/freq.h
diff --git a/include/asm-sh/cpu-sh3/gpio.h b/arch/sh/include/cpu-sh3/cpu/gpio.h
index 4e53eb314b8f..4e53eb314b8f 100644
--- a/include/asm-sh/cpu-sh3/gpio.h
+++ b/arch/sh/include/cpu-sh3/cpu/gpio.h
diff --git a/include/asm-sh/cpu-sh3/mmu_context.h b/arch/sh/include/cpu-sh3/cpu/mmu_context.h
index ab09da73ce77..ab09da73ce77 100644
--- a/include/asm-sh/cpu-sh3/mmu_context.h
+++ b/arch/sh/include/cpu-sh3/cpu/mmu_context.h
diff --git a/include/asm-sh/cpu-sh3/timer.h b/arch/sh/include/cpu-sh3/cpu/timer.h
index 793acf12aa08..793acf12aa08 100644
--- a/include/asm-sh/cpu-sh3/timer.h
+++ b/arch/sh/include/cpu-sh3/cpu/timer.h
diff --git a/include/asm-sh/cpu-sh3/ubc.h b/arch/sh/include/cpu-sh3/cpu/ubc.h
index 4e6381d5ff7a..4e6381d5ff7a 100644
--- a/include/asm-sh/cpu-sh3/ubc.h
+++ b/arch/sh/include/cpu-sh3/cpu/ubc.h
diff --git a/include/asm-sh/cpu-sh3/watchdog.h b/arch/sh/include/cpu-sh3/cpu/watchdog.h
index 4ee0347298d8..4ee0347298d8 100644
--- a/include/asm-sh/cpu-sh3/watchdog.h
+++ b/arch/sh/include/cpu-sh3/cpu/watchdog.h
diff --git a/include/asm-sh/cpu-sh4/addrspace.h b/arch/sh/include/cpu-sh4/cpu/addrspace.h
index a3fa733c1c7d..a3fa733c1c7d 100644
--- a/include/asm-sh/cpu-sh4/addrspace.h
+++ b/arch/sh/include/cpu-sh4/cpu/addrspace.h
diff --git a/include/asm-sh/cpu-sh4/cache.h b/arch/sh/include/cpu-sh4/cpu/cache.h
index 1c61ebf5c8e3..1c61ebf5c8e3 100644
--- a/include/asm-sh/cpu-sh4/cache.h
+++ b/arch/sh/include/cpu-sh4/cpu/cache.h
diff --git a/arch/sh/include/cpu-sh4/cpu/cacheflush.h b/arch/sh/include/cpu-sh4/cpu/cacheflush.h
new file mode 100644
index 000000000000..065306d376eb
--- /dev/null
+++ b/arch/sh/include/cpu-sh4/cpu/cacheflush.h
@@ -0,0 +1,43 @@
+/*
+ * include/asm-sh/cpu-sh4/cacheflush.h
+ *
+ * Copyright (C) 1999 Niibe Yutaka
+ * Copyright (C) 2003 Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#ifndef __ASM_CPU_SH4_CACHEFLUSH_H
+#define __ASM_CPU_SH4_CACHEFLUSH_H
+
+/*
+ *  Caches are broken on SH-4 (unless we use write-through
+ *  caching; in which case they're only semi-broken),
+ *  so we need them.
+ */
+void flush_cache_all(void);
+void flush_dcache_all(void);
+void flush_cache_mm(struct mm_struct *mm);
+#define flush_cache_dup_mm(mm) flush_cache_mm(mm)
+void flush_cache_range(struct vm_area_struct *vma, unsigned long start,
+		       unsigned long end);
+void flush_cache_page(struct vm_area_struct *vma, unsigned long addr,
+		      unsigned long pfn);
+void flush_dcache_page(struct page *pg);
+
+#define flush_dcache_mmap_lock(mapping)		do { } while (0)
+#define flush_dcache_mmap_unlock(mapping)	do { } while (0)
+
+void flush_icache_range(unsigned long start, unsigned long end);
+void flush_icache_user_range(struct vm_area_struct *vma, struct page *page,
+			     unsigned long addr, int len);
+
+#define flush_icache_page(vma,pg)		do { } while (0)
+
+/* Initialization of P3 area for copy_user_page */
+void p3_cache_init(void);
+
+#define PG_mapped	PG_arch_1
+
+#endif /* __ASM_CPU_SH4_CACHEFLUSH_H */
diff --git a/include/asm-sh/cpu-sh4/dma-sh7780.h b/arch/sh/include/cpu-sh4/cpu/dma-sh7780.h
index 71b426a6e482..71b426a6e482 100644
--- a/include/asm-sh/cpu-sh4/dma-sh7780.h
+++ b/arch/sh/include/cpu-sh4/cpu/dma-sh7780.h
diff --git a/arch/sh/include/cpu-sh4/cpu/dma.h b/arch/sh/include/cpu-sh4/cpu/dma.h
new file mode 100644
index 000000000000..235b7cd1fc9a
--- /dev/null
+++ b/arch/sh/include/cpu-sh4/cpu/dma.h
@@ -0,0 +1,65 @@
+#ifndef __ASM_CPU_SH4_DMA_H
+#define __ASM_CPU_SH4_DMA_H
+
+#define DMAOR_INIT	( 0x8000 | DMAOR_DME )
+
+/* SH7751/7760/7780 DMA IRQ sources */
+#define DMTE0_IRQ	34
+#define DMTE1_IRQ	35
+#define DMTE2_IRQ	36
+#define DMTE3_IRQ	37
+#define DMTE4_IRQ	44
+#define DMTE5_IRQ	45
+#define DMTE6_IRQ	46
+#define DMTE7_IRQ	47
+#define DMAE_IRQ	38
+
+#ifdef CONFIG_CPU_SH4A
+#define SH_DMAC_BASE	0xfc808020
+
+#define CHCR_TS_MASK	0x18
+#define CHCR_TS_SHIFT	3
+
+#include <cpu/dma-sh7780.h>
+#else
+#define SH_DMAC_BASE	0xffa00000
+
+/* Definitions for the SuperH DMAC */
+#define TM_BURST	0x0000080
+#define TS_8		0x00000010
+#define TS_16		0x00000020
+#define TS_32		0x00000030
+#define TS_64		0x00000000
+
+#define CHCR_TS_MASK	0x70
+#define CHCR_TS_SHIFT	4
+
+#define DMAOR_COD	0x00000008
+
+/*
+ * The SuperH DMAC supports a number of transmit sizes, we list them here,
+ * with their respective values as they appear in the CHCR registers.
+ *
+ * Defaults to a 64-bit transfer size.
+ */
+enum {
+	XMIT_SZ_64BIT,
+	XMIT_SZ_8BIT,
+	XMIT_SZ_16BIT,
+	XMIT_SZ_32BIT,
+	XMIT_SZ_256BIT,
+};
+
+/*
+ * The DMA count is defined as the number of bytes to transfer.
+ */
+static unsigned int ts_shift[] __maybe_unused = {
+	[XMIT_SZ_64BIT]		= 3,
+	[XMIT_SZ_8BIT]		= 0,
+	[XMIT_SZ_16BIT]		= 1,
+	[XMIT_SZ_32BIT]		= 2,
+	[XMIT_SZ_256BIT]	= 5,
+};
+#endif
+
+#endif /* __ASM_CPU_SH4_DMA_H */
diff --git a/include/asm-sh/cpu-sh4/fpu.h b/arch/sh/include/cpu-sh4/cpu/fpu.h
index febef7342528..febef7342528 100644
--- a/include/asm-sh/cpu-sh4/fpu.h
+++ b/arch/sh/include/cpu-sh4/cpu/fpu.h
diff --git a/arch/sh/include/cpu-sh4/cpu/freq.h b/arch/sh/include/cpu-sh4/cpu/freq.h
new file mode 100644
index 000000000000..c23af81c2e70
--- /dev/null
+++ b/arch/sh/include/cpu-sh4/cpu/freq.h
@@ -0,0 +1,44 @@
+/*
+ * include/asm-sh/cpu-sh4/freq.h
+ *
+ * Copyright (C) 2002, 2003 Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#ifndef __ASM_CPU_SH4_FREQ_H
+#define __ASM_CPU_SH4_FREQ_H
+
+#if defined(CONFIG_CPU_SUBTYPE_SH7722) || \
+    defined(CONFIG_CPU_SUBTYPE_SH7723) || \
+    defined(CONFIG_CPU_SUBTYPE_SH7343) || \
+    defined(CONFIG_CPU_SUBTYPE_SH7366)
+#define FRQCR		        0xa4150000
+#define VCLKCR			0xa4150004
+#define SCLKACR			0xa4150008
+#define SCLKBCR			0xa415000c
+#define IrDACLKCR		0xa4150010
+#define MSTPCR0			0xa4150030
+#define MSTPCR1			0xa4150034
+#define MSTPCR2			0xa4150038
+#elif defined(CONFIG_CPU_SUBTYPE_SH7763) || \
+      defined(CONFIG_CPU_SUBTYPE_SH7780)
+#define	FRQCR			0xffc80000
+#elif defined(CONFIG_CPU_SUBTYPE_SH7785)
+#define FRQCR0			0xffc80000
+#define FRQCR1			0xffc80004
+#define FRQMR1			0xffc80014
+#elif defined(CONFIG_CPU_SUBTYPE_SHX3)
+#define FRQCR			0xffc00014
+#else
+#define FRQCR			0xffc00000
+#define FRQCR_PSTBY		0x0200
+#define FRQCR_PLLEN		0x0400
+#define FRQCR_CKOEN		0x0800
+#endif
+#define MIN_DIVISOR_NR		0
+#define MAX_DIVISOR_NR		3
+
+#endif /* __ASM_CPU_SH4_FREQ_H */
+
diff --git a/include/asm-sh/cpu-sh4/mmu_context.h b/arch/sh/include/cpu-sh4/cpu/mmu_context.h
index 9ea8eb27b18e..9ea8eb27b18e 100644
--- a/include/asm-sh/cpu-sh4/mmu_context.h
+++ b/arch/sh/include/cpu-sh4/cpu/mmu_context.h
diff --git a/include/asm-sh/cpu-sh4/rtc.h b/arch/sh/include/cpu-sh4/cpu/rtc.h
index 25b1e6adfe8c..25b1e6adfe8c 100644
--- a/include/asm-sh/cpu-sh4/rtc.h
+++ b/arch/sh/include/cpu-sh4/cpu/rtc.h
diff --git a/include/asm-sh/cpu-sh4/sigcontext.h b/arch/sh/include/cpu-sh4/cpu/sigcontext.h
index ab392f120e06..ab392f120e06 100644
--- a/include/asm-sh/cpu-sh4/sigcontext.h
+++ b/arch/sh/include/cpu-sh4/cpu/sigcontext.h
diff --git a/include/asm-sh/cpu-sh4/sq.h b/arch/sh/include/cpu-sh4/cpu/sq.h
index 586d6491816a..586d6491816a 100644
--- a/include/asm-sh/cpu-sh4/sq.h
+++ b/arch/sh/include/cpu-sh4/cpu/sq.h
diff --git a/include/asm-sh/cpu-sh4/timer.h b/arch/sh/include/cpu-sh4/cpu/timer.h
index d1e796b96888..d1e796b96888 100644
--- a/include/asm-sh/cpu-sh4/timer.h
+++ b/arch/sh/include/cpu-sh4/cpu/timer.h
diff --git a/include/asm-sh/cpu-sh4/ubc.h b/arch/sh/include/cpu-sh4/cpu/ubc.h
index c86e17050935..c86e17050935 100644
--- a/include/asm-sh/cpu-sh4/ubc.h
+++ b/arch/sh/include/cpu-sh4/cpu/ubc.h
diff --git a/include/asm-sh/cpu-sh4/watchdog.h b/arch/sh/include/cpu-sh4/cpu/watchdog.h
index 259f6a0ce23d..259f6a0ce23d 100644
--- a/include/asm-sh/cpu-sh4/watchdog.h
+++ b/arch/sh/include/cpu-sh4/cpu/watchdog.h
diff --git a/include/asm-sh/cpu-sh5/addrspace.h b/arch/sh/include/cpu-sh5/cpu/addrspace.h
index dc36b9a03af6..dc36b9a03af6 100644
--- a/include/asm-sh/cpu-sh5/addrspace.h
+++ b/arch/sh/include/cpu-sh5/cpu/addrspace.h
diff --git a/include/asm-sh/cpu-sh5/cache.h b/arch/sh/include/cpu-sh5/cpu/cache.h
index ed050ab526f2..ed050ab526f2 100644
--- a/include/asm-sh/cpu-sh5/cache.h
+++ b/arch/sh/include/cpu-sh5/cpu/cache.h
diff --git a/include/asm-sh/cpu-sh5/cacheflush.h b/arch/sh/include/cpu-sh5/cpu/cacheflush.h
index 5a11f0b7e66a..5a11f0b7e66a 100644
--- a/include/asm-sh/cpu-sh5/cacheflush.h
+++ b/arch/sh/include/cpu-sh5/cpu/cacheflush.h
diff --git a/include/asm-sh/cpu-sh5/dma.h b/arch/sh/include/cpu-sh5/cpu/dma.h
index 7bf6bb3d35ed..7bf6bb3d35ed 100644
--- a/include/asm-sh/cpu-sh5/dma.h
+++ b/arch/sh/include/cpu-sh5/cpu/dma.h
diff --git a/include/asm-sh/cpu-sh5/irq.h b/arch/sh/include/cpu-sh5/cpu/irq.h
index f0f0756e6e84..f0f0756e6e84 100644
--- a/include/asm-sh/cpu-sh5/irq.h
+++ b/arch/sh/include/cpu-sh5/cpu/irq.h
diff --git a/include/asm-sh/cpu-sh5/mmu_context.h b/arch/sh/include/cpu-sh5/cpu/mmu_context.h
index 68a1d2cff457..68a1d2cff457 100644
--- a/include/asm-sh/cpu-sh5/mmu_context.h
+++ b/arch/sh/include/cpu-sh5/cpu/mmu_context.h
diff --git a/include/asm-sh/cpu-sh5/registers.h b/arch/sh/include/cpu-sh5/cpu/registers.h
index 6664ea6f1566..6664ea6f1566 100644
--- a/include/asm-sh/cpu-sh5/registers.h
+++ b/arch/sh/include/cpu-sh5/cpu/registers.h
diff --git a/include/asm-sh/cpu-sh5/rtc.h b/arch/sh/include/cpu-sh5/cpu/rtc.h
index 12ea0ed144e1..12ea0ed144e1 100644
--- a/include/asm-sh/cpu-sh5/rtc.h
+++ b/arch/sh/include/cpu-sh5/cpu/rtc.h
diff --git a/include/asm-sh/dreamcast/dma.h b/arch/sh/include/mach-dreamcast/mach/dma.h
index ddd68e788705..ddd68e788705 100644
--- a/include/asm-sh/dreamcast/dma.h
+++ b/arch/sh/include/mach-dreamcast/mach/dma.h
diff --git a/include/asm-sh/dreamcast/maple.h b/arch/sh/include/mach-dreamcast/mach/maple.h
index 51f6a87f1f11..51f6a87f1f11 100644
--- a/include/asm-sh/dreamcast/maple.h
+++ b/arch/sh/include/mach-dreamcast/mach/maple.h
diff --git a/arch/sh/include/mach-dreamcast/mach/pci.h b/arch/sh/include/mach-dreamcast/mach/pci.h
new file mode 100644
index 000000000000..75fc9009e092
--- /dev/null
+++ b/arch/sh/include/mach-dreamcast/mach/pci.h
@@ -0,0 +1,25 @@
+/*
+ * include/asm-sh/dreamcast/pci.h
+ *
+ * Copyright (C) 2001, 2002  M. R. Brown
+ * Copyright (C) 2002, 2003  Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#ifndef __ASM_SH_DREAMCAST_PCI_H
+#define __ASM_SH_DREAMCAST_PCI_H
+
+#include <mach-dreamcast/mach/sysasic.h>
+
+#define	GAPSPCI_REGS		0x01001400
+#define GAPSPCI_DMA_BASE	0x01840000
+#define GAPSPCI_DMA_SIZE	32768
+#define GAPSPCI_BBA_CONFIG	0x01001600
+#define GAPSPCI_BBA_CONFIG_SIZE	0x2000
+
+#define	GAPSPCI_IRQ		HW_EVENT_EXTERNAL
+
+#endif /* __ASM_SH_DREAMCAST_PCI_H */
+
diff --git a/include/asm-sh/dreamcast/sysasic.h b/arch/sh/include/mach-dreamcast/mach/sysasic.h
index f33426608a87..f33426608a87 100644
--- a/include/asm-sh/dreamcast/sysasic.h
+++ b/arch/sh/include/mach-dreamcast/mach/sysasic.h
diff --git a/include/asm-sh/landisk/gio.h b/arch/sh/include/mach-landisk/mach/gio.h
index 35d7368b718a..35d7368b718a 100644
--- a/include/asm-sh/landisk/gio.h
+++ b/arch/sh/include/mach-landisk/mach/gio.h
diff --git a/include/asm-sh/landisk/iodata_landisk.h b/arch/sh/include/mach-landisk/mach/iodata_landisk.h
index 6fb04ab38b9f..6fb04ab38b9f 100644
--- a/include/asm-sh/landisk/iodata_landisk.h
+++ b/arch/sh/include/mach-landisk/mach/iodata_landisk.h
diff --git a/include/asm-sh/se.h b/arch/sh/include/mach-se/mach/se.h
index bd2596c014a9..eb23000e1bbe 100644
--- a/include/asm-sh/se.h
+++ b/arch/sh/include/mach-se/mach/se.h
@@ -76,6 +76,23 @@
 #define IRQ_CFCARD	7
 #endif
 
+/* SH Ether support (SH7710/SH7712) */
+/* Base address */
+#define SH_ETH0_BASE 0xA7000000
+#define SH_ETH1_BASE 0xA7000400
+/* PHY ID */
+#if defined(CONFIG_CPU_SUBTYPE_SH7710)
+# define PHY_ID 0x00
+#elif defined(CONFIG_CPU_SUBTYPE_SH7712)
+# define PHY_ID 0x01
+#endif
+/* Ether IRQ */
+#define SH_ETH0_IRQ	80
+#define SH_ETH1_IRQ	81
+#define SH_TSU_IRQ	82
+
+void init_se_IRQ(void);
+
 #define __IO_PREFIX	se
 #include <asm/io_generic.h>
 
diff --git a/include/asm-sh/se7206.h b/arch/sh/include/mach-se/mach/se7206.h
index 698eb80389ab..698eb80389ab 100644
--- a/include/asm-sh/se7206.h
+++ b/arch/sh/include/mach-se/mach/se7206.h
diff --git a/arch/sh/include/mach-se/mach/se7343.h b/arch/sh/include/mach-se/mach/se7343.h
new file mode 100644
index 000000000000..98458460e632
--- /dev/null
+++ b/arch/sh/include/mach-se/mach/se7343.h
@@ -0,0 +1,149 @@
+#ifndef __ASM_SH_HITACHI_SE7343_H
+#define __ASM_SH_HITACHI_SE7343_H
+
+/*
+ * include/asm-sh/se/se7343.h
+ *
+ * Copyright (C) 2003 Takashi Kusuda <kusuda-takashi@hitachi-ul.co.jp>
+ *
+ * SH-Mobile SolutionEngine 7343 support
+ */
+
+/* Box specific addresses.  */
+
+/* Area 0 */
+#define PA_ROM		0x00000000	/* EPROM */
+#define PA_ROM_SIZE	0x00400000	/* EPROM size 4M byte(Actually 2MB) */
+#define PA_FROM		0x00400000	/* Flash ROM */
+#define PA_FROM_SIZE	0x00400000	/* Flash size 4M byte */
+#define PA_SRAM		0x00800000	/* SRAM */
+#define PA_FROM_SIZE	0x00400000	/* SRAM size 4M byte */
+/* Area 1 */
+#define PA_EXT1		0x04000000
+#define PA_EXT1_SIZE	0x04000000
+/* Area 2 */
+#define PA_EXT2		0x08000000
+#define PA_EXT2_SIZE	0x04000000
+/* Area 3 */
+#define PA_SDRAM	0x0c000000
+#define PA_SDRAM_SIZE	0x04000000
+/* Area 4 */
+#define PA_PCIC		0x10000000	/* MR-SHPC-01 PCMCIA */
+#define PA_MRSHPC       0xb03fffe0      /* MR-SHPC-01 PCMCIA controller */
+#define PA_MRSHPC_MW1   0xb0400000      /* MR-SHPC-01 memory window base */
+#define PA_MRSHPC_MW2   0xb0500000      /* MR-SHPC-01 attribute window base */
+#define PA_MRSHPC_IO    0xb0600000      /* MR-SHPC-01 I/O window base */
+#define MRSHPC_OPTION   (PA_MRSHPC + 6)
+#define MRSHPC_CSR      (PA_MRSHPC + 8)
+#define MRSHPC_ISR      (PA_MRSHPC + 10)
+#define MRSHPC_ICR      (PA_MRSHPC + 12)
+#define MRSHPC_CPWCR    (PA_MRSHPC + 14)
+#define MRSHPC_MW0CR1   (PA_MRSHPC + 16)
+#define MRSHPC_MW1CR1   (PA_MRSHPC + 18)
+#define MRSHPC_IOWCR1   (PA_MRSHPC + 20)
+#define MRSHPC_MW0CR2   (PA_MRSHPC + 22)
+#define MRSHPC_MW1CR2   (PA_MRSHPC + 24)
+#define MRSHPC_IOWCR2   (PA_MRSHPC + 26)
+#define MRSHPC_CDCR     (PA_MRSHPC + 28)
+#define MRSHPC_PCIC_INFO (PA_MRSHPC + 30)
+#define PA_LED		0xb0C00000	/* LED */
+#define LED_SHIFT       0
+#define PA_DIPSW	0xb0900000	/* Dip switch 31 */
+#define PA_CPLD_MODESET	0xb1400004	/* CPLD Mode set register */
+#define PA_CPLD_ST	0xb1400008	/* CPLD Interrupt status register */
+#define PA_CPLD_IMSK	0xb140000a	/* CPLD Interrupt mask register */
+/* Area 5 */
+#define PA_EXT5		0x14000000
+#define PA_EXT5_SIZE	0x04000000
+/* Area 6 */
+#define PA_LCD1		0xb8000000
+#define PA_LCD2		0xb8800000
+
+#define PORT_PACR	0xA4050100
+#define PORT_PBCR	0xA4050102
+#define PORT_PCCR	0xA4050104
+#define PORT_PDCR	0xA4050106
+#define PORT_PECR	0xA4050108
+#define PORT_PFCR	0xA405010A
+#define PORT_PGCR	0xA405010C
+#define PORT_PHCR	0xA405010E
+#define PORT_PJCR	0xA4050110
+#define PORT_PKCR	0xA4050112
+#define PORT_PLCR	0xA4050114
+#define PORT_PMCR	0xA4050116
+#define PORT_PNCR	0xA4050118
+#define PORT_PQCR	0xA405011A
+#define PORT_PRCR	0xA405011C
+#define PORT_PSCR	0xA405011E
+#define PORT_PTCR	0xA4050140
+#define PORT_PUCR	0xA4050142
+#define PORT_PVCR	0xA4050144
+#define PORT_PWCR	0xA4050146
+#define PORT_PYCR	0xA4050148
+#define PORT_PZCR	0xA405014A
+
+#define PORT_PSELA	0xA405014C
+#define PORT_PSELB	0xA405014E
+#define PORT_PSELC	0xA4050150
+#define PORT_PSELD	0xA4050152
+#define PORT_PSELE	0xA4050154
+
+#define PORT_HIZCRA	0xA4050156
+#define PORT_HIZCRB	0xA4050158
+#define PORT_HIZCRC	0xA405015C
+
+#define PORT_DRVCR	0xA4050180
+
+#define PORT_PADR  	0xA4050120
+#define PORT_PBDR  	0xA4050122
+#define PORT_PCDR  	0xA4050124
+#define PORT_PDDR  	0xA4050126
+#define PORT_PEDR  	0xA4050128
+#define PORT_PFDR  	0xA405012A
+#define PORT_PGDR  	0xA405012C
+#define PORT_PHDR  	0xA405012E
+#define PORT_PJDR  	0xA4050130
+#define PORT_PKDR  	0xA4050132
+#define PORT_PLDR  	0xA4050134
+#define PORT_PMDR  	0xA4050136
+#define PORT_PNDR  	0xA4050138
+#define PORT_PQDR  	0xA405013A
+#define PORT_PRDR  	0xA405013C
+#define PORT_PTDR  	0xA4050160
+#define PORT_PUDR  	0xA4050162
+#define PORT_PVDR  	0xA4050164
+#define PORT_PWDR  	0xA4050166
+#define PORT_PYDR  	0xA4050168
+
+#define FPGA_IN		0xb1400000
+#define FPGA_OUT	0xb1400002
+
+#define __IO_PREFIX	sh7343se
+#include <asm/io_generic.h>
+
+#define IRQ0_IRQ        32
+#define IRQ1_IRQ        33
+#define IRQ4_IRQ        36
+#define IRQ5_IRQ        37
+
+#define SE7343_FPGA_IRQ_MRSHPC0	0
+#define SE7343_FPGA_IRQ_MRSHPC1	1
+#define SE7343_FPGA_IRQ_MRSHPC2	2
+#define SE7343_FPGA_IRQ_MRSHPC3	3
+#define SE7343_FPGA_IRQ_SMC	6	/* EXT_IRQ2 */
+#define SE7343_FPGA_IRQ_USB	8
+
+#define SE7343_FPGA_IRQ_NR	11
+#define SE7343_FPGA_IRQ_BASE	120
+
+#define MRSHPC_IRQ3    	(SE7343_FPGA_IRQ_BASE + SE7343_FPGA_IRQ_MRSHPC3)
+#define MRSHPC_IRQ2    	(SE7343_FPGA_IRQ_BASE + SE7343_FPGA_IRQ_MRSHPC2)
+#define MRSHPC_IRQ1    	(SE7343_FPGA_IRQ_BASE + SE7343_FPGA_IRQ_MRSHPC1)
+#define MRSHPC_IRQ0    	(SE7343_FPGA_IRQ_BASE + SE7343_FPGA_IRQ_MRSHPC0)
+#define SMC_IRQ		(SE7343_FPGA_IRQ_BASE + SE7343_FPGA_IRQ_SMC)
+#define USB_IRQ		(SE7343_FPGA_IRQ_BASE + SE7343_FPGA_IRQ_USB)
+
+/* arch/sh/boards/se/7343/irq.c */
+void init_7343se_IRQ(void);
+
+#endif  /* __ASM_SH_HITACHI_SE7343_H */
diff --git a/include/asm-sh/se7721.h b/arch/sh/include/mach-se/mach/se7721.h
index b957f6041193..b957f6041193 100644
--- a/include/asm-sh/se7721.h
+++ b/arch/sh/include/mach-se/mach/se7721.h
diff --git a/include/asm-sh/se7722.h b/arch/sh/include/mach-se/mach/se7722.h
index 3690fe5857a4..e971d9a82f4a 100644
--- a/include/asm-sh/se7722.h
+++ b/arch/sh/include/mach-se/mach/se7722.h
@@ -55,10 +55,6 @@
 
 #define PA_LAN		(PA_AREA6_IO + 0)		/* SMC LAN91C111 */
 /* GPIO */
-#define MSTPCR0         0xA4150030UL
-#define MSTPCR1         0xA4150034UL
-#define MSTPCR2         0xA4150038UL
-
 #define FPGA_IN         0xb1840000UL
 #define FPGA_OUT        0xb1840004UL
 
diff --git a/include/asm-sh/se7751.h b/arch/sh/include/mach-se/mach/se7751.h
index b36792ac5d66..b36792ac5d66 100644
--- a/include/asm-sh/se7751.h
+++ b/arch/sh/include/mach-se/mach/se7751.h
diff --git a/include/asm-sh/se7780.h b/arch/sh/include/mach-se/mach/se7780.h
index 40e9b41458cd..40e9b41458cd 100644
--- a/include/asm-sh/se7780.h
+++ b/arch/sh/include/mach-se/mach/se7780.h
diff --git a/include/asm-sh/sh03/io.h b/arch/sh/include/mach-sh03/mach/io.h
index c39c785bba94..c39c785bba94 100644
--- a/include/asm-sh/sh03/io.h
+++ b/arch/sh/include/mach-sh03/mach/io.h
diff --git a/include/asm-sh/sh03/sh03.h b/arch/sh/include/mach-sh03/mach/sh03.h
index 19c40b80428d..19c40b80428d 100644
--- a/include/asm-sh/sh03/sh03.h
+++ b/arch/sh/include/mach-sh03/mach/sh03.h
diff --git a/arch/sh/kernel/.gitignore b/arch/sh/kernel/.gitignore
new file mode 100644
index 000000000000..c5f676c3c224
--- /dev/null
+++ b/arch/sh/kernel/.gitignore
@@ -0,0 +1 @@
+vmlinux.lds
diff --git a/arch/sh/kernel/Makefile_32 b/arch/sh/kernel/Makefile_32
index 4bbdce36b92b..0e6905fe9fec 100644
--- a/arch/sh/kernel/Makefile_32
+++ b/arch/sh/kernel/Makefile_32
@@ -21,7 +21,7 @@ obj-$(CONFIG_KEXEC)		+= machine_kexec.o relocate_kernel.o
 obj-$(CONFIG_CRASH_DUMP)	+= crash_dump.o
 obj-$(CONFIG_PM)		+= pm.o
 obj-$(CONFIG_STACKTRACE)	+= stacktrace.o
-obj-$(CONFIG_BINFMT_ELF)	+= dump_task.o
+obj-$(CONFIG_ELF_CORE)		+= dump_task.o
 obj-$(CONFIG_IO_TRAPPED)	+= io_trapped.o
 
 EXTRA_CFLAGS += -Werror
diff --git a/arch/sh/kernel/cf-enabler.c b/arch/sh/kernel/cf-enabler.c
index 01ff4d05aab0..bea40339919b 100644
--- a/arch/sh/kernel/cf-enabler.c
+++ b/arch/sh/kernel/cf-enabler.c
@@ -80,11 +80,11 @@ static int __init cf_init_default(void)
 }
 
 #if defined(CONFIG_SH_SOLUTION_ENGINE)
-#include <asm/se.h>
+#include <mach-se/mach/se.h>
 #elif defined(CONFIG_SH_7722_SOLUTION_ENGINE)
-#include <asm/se7722.h>
+#include <mach-se/mach/se7722.h>
 #elif defined(CONFIG_SH_7721_SOLUTION_ENGINE)
-#include <asm/se7721.h>
+#include <mach-se/mach/se7721.h>
 #endif
 
 /*
@@ -157,7 +157,7 @@ static int __init cf_init_se(void)
 }
 #endif
 
-int __init cf_init(void)
+static int __init cf_init(void)
 {
 	if (mach_is_se() || mach_is_7722se() || mach_is_7721se())
 		return cf_init_se();
diff --git a/arch/sh/kernel/cpu/clock.c b/arch/sh/kernel/cpu/clock.c
index b5f1e23ed57c..f5eb56e6bc59 100644
--- a/arch/sh/kernel/cpu/clock.c
+++ b/arch/sh/kernel/cpu/clock.c
@@ -88,7 +88,7 @@ static void propagate_rate(struct clk *clk)
 	}
 }
 
-int __clk_enable(struct clk *clk)
+static int __clk_enable(struct clk *clk)
 {
 	/*
 	 * See if this is the first time we're enabling the clock, some
@@ -111,7 +111,6 @@ int __clk_enable(struct clk *clk)
 
 	return 0;
 }
-EXPORT_SYMBOL_GPL(__clk_enable);
 
 int clk_enable(struct clk *clk)
 {
@@ -131,7 +130,7 @@ static void clk_kref_release(struct kref *kref)
 	/* Nothing to do */
 }
 
-void __clk_disable(struct clk *clk)
+static void __clk_disable(struct clk *clk)
 {
 	int count = kref_put(&clk->kref, clk_kref_release);
 
@@ -143,7 +142,6 @@ void __clk_disable(struct clk *clk)
 			clk->ops->disable(clk);
 	}
 }
-EXPORT_SYMBOL_GPL(__clk_disable);
 
 void clk_disable(struct clk *clk)
 {
@@ -310,15 +308,11 @@ static int show_clocks(char *buf, char **start, off_t off,
 	list_for_each_entry_reverse(clk, &clock_list, node) {
 		unsigned long rate = clk_get_rate(clk);
 
-		/*
-		 * Don't bother listing dummy clocks with no ancestry
-		 * that only support enable and disable ops.
-		 */
-		if (unlikely(!rate && !clk->parent))
-			continue;
-
-		p += sprintf(p, "%-12s\t: %ld.%02ldMHz\n", clk->name,
-			     rate / 1000000, (rate % 1000000) / 10000);
+		p += sprintf(p, "%-12s\t: %ld.%02ldMHz\t%s\n", clk->name,
+			     rate / 1000000, (rate % 1000000) / 10000,
+			     ((clk->flags & CLK_ALWAYS_ENABLED) ||
+			      (atomic_read(&clk->kref.refcount) != 1)) ?
+			     "enabled" : "disabled");
 	}
 
 	return p - buf;
diff --git a/arch/sh/kernel/cpu/irq/intc-sh5.c b/arch/sh/kernel/cpu/irq/intc-sh5.c
index 79baa47af977..726f0335da76 100644
--- a/arch/sh/kernel/cpu/irq/intc-sh5.c
+++ b/arch/sh/kernel/cpu/irq/intc-sh5.c
@@ -20,7 +20,7 @@
 #include <linux/io.h>
 #include <linux/kernel.h>
 #include <linux/bitops.h>
-#include <asm/cpu/irq.h>
+#include <cpu/irq.h>
 #include <asm/page.h>
 
 /*
diff --git a/arch/sh/kernel/cpu/irq/intc.c b/arch/sh/kernel/cpu/irq/intc.c
index da5dae787888..8c70e201bde0 100644
--- a/arch/sh/kernel/cpu/irq/intc.c
+++ b/arch/sh/kernel/cpu/irq/intc.c
@@ -62,7 +62,7 @@ struct intc_desc_int {
 #endif
 
 static unsigned int intc_prio_level[NR_IRQS]; /* for now */
-#ifdef CONFIG_CPU_SH3
+#if defined(CONFIG_CPU_SH3) || defined(CONFIG_CPU_SH4A)
 static unsigned long ack_handle[NR_IRQS];
 #endif
 
@@ -231,7 +231,7 @@ static void intc_disable(unsigned int irq)
 	}
 }
 
-#ifdef CONFIG_CPU_SH3
+#if defined(CONFIG_CPU_SH3) || defined(CONFIG_CPU_SH4A)
 static void intc_mask_ack(unsigned int irq)
 {
 	struct intc_desc_int *d = get_intc_desc(irq);
@@ -244,8 +244,23 @@ static void intc_mask_ack(unsigned int irq)
 
 	if (handle) {
 		addr = INTC_REG(d, _INTC_ADDR_D(handle), 0);
-		ctrl_inb(addr);
-		ctrl_outb(0x3f ^ set_field(0, 1, handle), addr);
+		switch (_INTC_FN(handle)) {
+		case REG_FN_MODIFY_BASE + 0:	/* 8bit */
+			ctrl_inb(addr);
+			ctrl_outb(0xff ^ set_field(0, 1, handle), addr);
+			break;
+		case REG_FN_MODIFY_BASE + 1:	/* 16bit */
+			ctrl_inw(addr);
+			ctrl_outw(0xffff ^ set_field(0, 1, handle), addr);
+			break;
+		case REG_FN_MODIFY_BASE + 3:	/* 32bit */
+			ctrl_inl(addr);
+			ctrl_outl(0xffffffff ^ set_field(0, 1, handle), addr);
+			break;
+		default:
+			BUG();
+			break;
+		}
 	}
 }
 #endif
@@ -466,7 +481,7 @@ static unsigned int __init intc_prio_data(struct intc_desc *desc,
 	return 0;
 }
 
-#ifdef CONFIG_CPU_SH3
+#if defined(CONFIG_CPU_SH3) || defined(CONFIG_CPU_SH4A)
 static unsigned int __init intc_ack_data(struct intc_desc *desc,
 					  struct intc_desc_int *d,
 					  intc_enum enum_id)
@@ -601,7 +616,7 @@ static void __init intc_register_irq(struct intc_desc *desc,
 	/* irq should be disabled by default */
 	d->chip.mask(irq);
 
-#ifdef CONFIG_CPU_SH3
+#if defined(CONFIG_CPU_SH3) || defined(CONFIG_CPU_SH4A)
 	if (desc->ack_regs)
 		ack_handle[irq] = intc_ack_data(desc, d, enum_id);
 #endif
@@ -635,7 +650,7 @@ void __init register_intc_controller(struct intc_desc *desc)
 	d->nr_reg += desc->prio_regs ? desc->nr_prio_regs * 2 : 0;
 	d->nr_reg += desc->sense_regs ? desc->nr_sense_regs : 0;
 
-#ifdef CONFIG_CPU_SH3
+#if defined(CONFIG_CPU_SH3) || defined(CONFIG_CPU_SH4A)
 	d->nr_reg += desc->ack_regs ? desc->nr_ack_regs : 0;
 #endif
 	d->reg = alloc_bootmem(d->nr_reg * sizeof(*d->reg));
@@ -676,7 +691,7 @@ void __init register_intc_controller(struct intc_desc *desc)
 	d->chip.mask_ack = intc_disable;
 	d->chip.set_type = intc_set_sense;
 
-#ifdef CONFIG_CPU_SH3
+#if defined(CONFIG_CPU_SH3) || defined(CONFIG_CPU_SH4A)
 	if (desc->ack_regs) {
 		for (i = 0; i < desc->nr_ack_regs; i++)
 			k += save_reg(d, k, desc->ack_regs[i].set_reg, 0);
diff --git a/arch/sh/kernel/cpu/sh2/entry.S b/arch/sh/kernel/cpu/sh2/entry.S
index 0fc89069d8c7..becc54c45692 100644
--- a/arch/sh/kernel/cpu/sh2/entry.S
+++ b/arch/sh/kernel/cpu/sh2/entry.S
@@ -3,7 +3,7 @@
  *
  * The SH-2 exception entry
  *
- * Copyright (C) 2005,2006 Yoshinori Sato
+ * Copyright (C) 2005-2008 Yoshinori Sato
  * Copyright (C) 2005  AXE,Inc.
  *
  * This file is subject to the terms and conditions of the GNU General Public
@@ -14,7 +14,7 @@
 #include <linux/linkage.h>
 #include <asm/asm-offsets.h>
 #include <asm/thread_info.h>
-#include <asm/cpu/mmu_context.h>
+#include <cpu/mmu_context.h>
 #include <asm/unistd.h>
 #include <asm/errno.h>
 #include <asm/page.h>
@@ -36,43 +36,41 @@ OFF_TRA	=  (16*4+6*4)
 #include <asm/entry-macros.S>
 
 ENTRY(exception_handler)
-	! already saved r0/r1
+	! stack
+	! r0 <- point sp
+	! r1
+	! pc
+	! sr
+	! r0 = temporary
+	! r1 = vector (pseudo EXPEVT / INTEVT / TRA)
 	mov.l	r2,@-sp
 	mov.l	r3,@-sp
-	mov	r0,r1
 	cli
 	mov.l	$cpu_mode,r2
 	mov.l	@r2,r0
 	mov.l	@(5*4,r15),r3	! previous SR
-	shll2	r3		! set "S" flag
-	rotl	r0		! T <- "S" flag
-	rotl	r0		! "S" flag is LSB
-	rotcr	r3		! T -> r3:b30
-	shlr	r3
-	shlr	r0
-	bt/s	1f
-	 mov.l	r3,@(5*4,r15)	! copy cpu mode to SR
+	or	r0,r3		! set MD
+	tst	r0,r0
+	bf/s	1f		! previous mode check
+	 mov.l	r3,@(5*4,r15)	! update SR
 	! switch to kernel mode
-	mov	#1,r0
-	rotr	r0
-	rotr	r0
+	mov.l	__md_bit,r0
 	mov.l	r0,@r2		! enter kernel mode
 	mov.l	$current_thread_info,r2
 	mov.l	@r2,r2
-	mov	#0x20,r0
+	mov	#(THREAD_SIZE >> 8),r0
 	shll8	r0
 	add	r2,r0
 	mov	r15,r2		! r2 = user stack top
 	mov	r0,r15		! switch kernel stack
-	add	#-4,r15		! dummy
 	mov.l	r1,@-r15	! TRA
 	sts.l	macl, @-r15
 	sts.l	mach, @-r15
 	stc.l	gbr, @-r15
-	mov.l	@(4*4,r2),r0
-	mov.l	@(5*4,r2),r1
-	mov.l	r1,@-r15	! original SR
+	mov.l	@(5*4,r2),r0
+	mov.l	r0,@-r15	! original SR
 	sts.l	pr,@-r15
+	mov.l	@(4*4,r2),r0
 	mov.l	r0,@-r15	! original PC
 	mov	r2,r3
 	add	#(4+2)*4,r3	! rewind r0 - r3 + exception frame
@@ -88,14 +86,15 @@ ENTRY(exception_handler)
 	mov.l	r6,@-r15
 	mov.l	r5,@-r15
 	mov.l	r4,@-r15
+	mov	r1,r9		! save TRA
 	mov	r2,r8		! copy user -> kernel stack
-	mov.l	@r8+,r3
+	mov.l	@(0,r8),r3
 	mov.l	r3,@-r15
-	mov.l	@r8+,r2
+	mov.l	@(4,r8),r2
 	mov.l	r2,@-r15
-	mov.l	@r8+,r1
+	mov.l	@(12,r8),r1
 	mov.l	r1,@-r15
-	mov.l	@r8+,r0
+	mov.l	@(8,r8),r0
 	bra	2f
 	 mov.l	r0,@-r15
 1:
@@ -107,10 +106,11 @@ ENTRY(exception_handler)
 	mov.l	r0,@-r15	
 	mov.l	@r2+,r0		! old R2
 	mov.l	r0,@-r15	
-	mov.l	@r2+,r0		! old R1
-	mov.l	r0,@-r15	
-	mov.l	@r2+,r0		! old R0
+	mov.l	@(4,r2),r0	! old R1
 	mov.l	r0,@-r15	
+	mov.l	@r2,r0		! old R0
+	mov.l	r0,@-r15
+	add	#8,r2
 	mov.l	@r2+,r3		! old PC
 	mov.l	@r2+,r0		! old SR
 	add	#-4,r2		! exception frame stub (sr)
@@ -135,14 +135,12 @@ ENTRY(exception_handler)
 	mov.l	r6,@-r2
 	mov.l	r5,@-r2
 	mov.l	r4,@-r2
+	mov	r1,r9
 	mov.l	@(OFF_R0,r15),r0
 	mov.l	@(OFF_R1,r15),r1
 	mov.l	@(OFF_R2,r15),r2
 	mov.l	@(OFF_R3,r15),r3
 2:
-	mov	#OFF_TRA,r8
-	add	r15,r8
-	mov.l	@r8,r9	
 	mov	#64,r8
 	cmp/hs	r8,r9
 	bt	interrupt_entry	! vec >= 64 is interrupt
@@ -150,26 +148,14 @@ ENTRY(exception_handler)
 	cmp/hs	r8,r9
 	bt	trap_entry	! 64 > vec >= 32  is trap
 
-#if defined(CONFIG_SH_FPU)
-	mov     #13,r8
-	cmp/eq  r8,r9
-	bt      10f             ! fpu
-	nop
-#endif
-
 	mov.l	4f,r8
 	mov	r9,r4
 	shll2	r9
 	add	r9,r8
-	mov.l	@r8,r8
-	mov	#0,r9
-	cmp/eq	r9,r8
+	mov.l	@r8,r8		! exception handler address
+	tst	r8,r8
 	bf	3f
 	mov.l	8f,r8		! unhandled exception
-#if defined(CONFIG_SH_FPU)
-10:
-	mov.l	9f, r8		! unhandled exception
-#endif
 3:
 	mov.l	5f,r10
 	jmp	@r8
@@ -188,10 +174,7 @@ interrupt_entry:
 5:	.long	ret_from_exception
 6:	.long	ret_from_irq
 7:	.long	do_IRQ
-8:	.long	do_exception_error
-#ifdef CONFIG_SH_FPU
-9:	.long	fpu_error_trap_handler
-#endif
+8:	.long	exception_error
 
 trap_entry:
 	mov	#0x30,r8
@@ -200,24 +183,9 @@ trap_entry:
 	add	#-0x10,r9	! convert SH2 to SH3/4 ABI
 1:	
 	shll2	r9			! TRA
-	mov	#OFF_TRA,r8
-	add	r15,r8
-	mov.l	r9,@r8
-	mov	r9,r8
-#ifdef CONFIG_TRACE_IRQFLAGS
-	mov.l	2f, r9
-	jsr	@r9
-	 nop
-#endif
-	sti
-	bra	system_call
-	 nop
+	bra	system_call	! jump common systemcall entry
+	 mov	r9,r8
 	
-	.align	2
-#ifdef CONFIG_TRACE_IRQFLAGS
-2:	.long	trace_hardirqs_on
-#endif
-
 #if defined(CONFIG_SH_STANDARD_BIOS)
 	/* Unwind the stack and jmp to the debug entry */
 ENTRY(sh_bios_handler)
@@ -240,7 +208,7 @@ ENTRY(sh_bios_handler)
 	mov.l	@r2,r2
 	stc	sr,r3
 	mov.l	r2,@r0
-	mov.l	r3,@r0
+	mov.l	r3,@(4,r0)
 	mov.l	r1,@(8,r0)	
 	mov.l	@r15+, r0
 	mov.l	@r15+, r1
@@ -272,22 +240,30 @@ ENTRY(address_error_trap_handler)
 	mov.l	1f,r0
 	jmp	@r0
 	 mov	#0,r5				! writeaccess is unknown
-	.align	2
 
+	.align	2
 1:	.long	do_address_error
 
 restore_all:
-	cli
-#ifdef CONFIG_TRACE_IRQFLAGS
-	mov.l	1f, r0
-	jsr	@r0
-	 nop
-#endif
+	stc	sr,r0
+	or	#0xf0,r0
+	ldc	r0,sr				! all interrupt block (same BL = 1)
+	! restore special register
+	! overlap exception frame
+	mov	r15,r0
+	add	#17*4,r0
+	lds.l	@r0+,pr
+	add	#4,r0
+	ldc.l	@r0+,gbr
+	lds.l	@r0+,mach
+	lds.l	@r0+,macl
 	mov	r15,r0
 	mov.l	$cpu_mode,r2
 	mov	#OFF_SR,r3
 	mov.l	@(r0,r3),r1
-	mov.l	r1,@r2
+	mov.l	__md_bit,r3
+	and	r1,r3				! copy MD bit
+	mov.l	r3,@r2
 	shll2	r1				! clear MD bit
 	shlr2	r1
 	mov.l	@(OFF_SP,r0),r2
@@ -297,12 +273,6 @@ restore_all:
 	mov	#OFF_PC,r3
 	mov.l	@(r0,r3),r1
 	mov.l	r1,@r2				! set pc
-	add	#4*16+4,r0
-	lds.l	@r0+,pr
-	add	#4,r0				! skip sr
-	ldc.l	@r0+,gbr
-	lds.l	@r0+,mach
-	lds.l	@r0+,macl
 	get_current_thread_info r0, r1
 	mov.l	$current_thread_info,r1
 	mov.l	r0,@r1
@@ -326,9 +296,8 @@ restore_all:
 	 nop
 
 	.align 2
-#ifdef CONFIG_TRACE_IRQFLAGS
-1:     .long   trace_hardirqs_off
-#endif
+__md_bit:
+	.long	0x40000000
 $current_thread_info:
 	.long	__current_thread_info
 $cpu_mode:	
diff --git a/arch/sh/kernel/cpu/sh2/ex.S b/arch/sh/kernel/cpu/sh2/ex.S
index 6d285af7846c..85b0bf81fc1d 100644
--- a/arch/sh/kernel/cpu/sh2/ex.S
+++ b/arch/sh/kernel/cpu/sh2/ex.S
@@ -18,16 +18,17 @@
 exception_entry:	
 no	=	0
 	.rept	256
-	mov.l	r0,@-sp
-	mov	#no,r0
+	mov.l	r1,@-sp
 	bra	exception_trampoline
-	and	#0xff,r0
+	mov	#no,r1
 no	=	no + 1
 	.endr
 exception_trampoline:
-	mov.l	r1,@-sp
-	mov.l	$exception_handler,r1
-	jmp	@r1
+	mov.l	r0,@-sp
+	mov.l	$exception_handler,r0
+	extu.b	r1,r1
+	jmp	@r0
+	  extu.w	r1,r1
 
 	.align	2
 $exception_entry:
@@ -41,6 +42,6 @@ $exception_handler:
 ENTRY(vbr_base)
 vector	=	0
 	.rept	256
-	.long	exception_entry + vector * 8
+	.long	exception_entry + vector * 6
 vector	=	vector + 1
 	.endr
diff --git a/arch/sh/kernel/cpu/sh2/setup-sh7619.c b/arch/sh/kernel/cpu/sh2/setup-sh7619.c
index cc530f4d84d6..56e5878e5516 100644
--- a/arch/sh/kernel/cpu/sh2/setup-sh7619.c
+++ b/arch/sh/kernel/cpu/sh2/setup-sh7619.c
@@ -96,8 +96,32 @@ static struct platform_device sci_device = {
 	},
 };
 
+static struct resource eth_resources[] = {
+	[0] = {
+		.start = 0xfb000000,
+		.end =   0xfb0001c8,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = 85,
+		.end = 85,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device eth_device = {
+	.name = "sh-eth",
+	.id	= -1,
+	.dev = {
+		.platform_data = (void *)1,
+	},
+	.num_resources = ARRAY_SIZE(eth_resources),
+	.resource = eth_resources,
+};
+
 static struct platform_device *sh7619_devices[] __initdata = {
 	&sci_device,
+	&eth_device,
 };
 
 static int __init sh7619_devices_setup(void)
diff --git a/arch/sh/kernel/cpu/sh2a/Makefile b/arch/sh/kernel/cpu/sh2a/Makefile
index 7e2b90cfa7bf..1ab1ecf4c768 100644
--- a/arch/sh/kernel/cpu/sh2a/Makefile
+++ b/arch/sh/kernel/cpu/sh2a/Makefile
@@ -4,7 +4,7 @@
 
 obj-y	:= common.o probe.o opcode_helper.o
 
-common-y	+= $(addprefix ../sh2/, ex.o entry.o)
+common-y	+= ex.o entry.o
 
 obj-$(CONFIG_SH_FPU)	+= fpu.o
 
diff --git a/arch/sh/kernel/cpu/sh2a/entry.S b/arch/sh/kernel/cpu/sh2a/entry.S
new file mode 100644
index 000000000000..ab3903eeda5c
--- /dev/null
+++ b/arch/sh/kernel/cpu/sh2a/entry.S
@@ -0,0 +1,249 @@
+/*
+ * arch/sh/kernel/cpu/sh2a/entry.S
+ *
+ * The SH-2A exception entry
+ *
+ * Copyright (C) 2008 Yoshinori Sato
+ * Based on arch/sh/kernel/cpu/sh2/entry.S
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#include <linux/linkage.h>
+#include <asm/asm-offsets.h>
+#include <asm/thread_info.h>
+#include <cpu/mmu_context.h>
+#include <asm/unistd.h>
+#include <asm/errno.h>
+#include <asm/page.h>
+	
+/* Offsets to the stack */
+OFF_R0  =  0		/* Return value. New ABI also arg4 */
+OFF_R1  =  4     	/* New ABI: arg5 */
+OFF_R2  =  8     	/* New ABI: arg6 */
+OFF_R3  =  12     	/* New ABI: syscall_nr */
+OFF_R4  =  16     	/* New ABI: arg0 */
+OFF_R5  =  20     	/* New ABI: arg1 */
+OFF_R6  =  24     	/* New ABI: arg2 */
+OFF_R7  =  28     	/* New ABI: arg3 */
+OFF_SP	=  (15*4)
+OFF_PC  =  (16*4)
+OFF_SR	=  (16*4+2*4)
+OFF_TRA	=  (16*4+6*4)
+
+#include <asm/entry-macros.S>
+
+ENTRY(exception_handler)
+	! stack
+	! r0 <- point sp
+	! r1
+	! pc
+	! sr
+	! r0 = temporary
+	! r1 = vector (pseudo EXPEVT / INTEVT / TRA)
+	mov.l	r2,@-sp
+	cli
+	mov.l	$cpu_mode,r2
+	bld.b	#6,@(0,r2)	!previus SR.MD
+	bst.b	#6,@(4*4,r15)	!set cpu mode to SR.MD
+	bt	1f
+	! switch to kernel mode
+	bset.b	#6,@(0,r2)	!set SR.MD
+	mov.l	$current_thread_info,r2
+	mov.l	@r2,r2
+	mov	#(THREAD_SIZE >> 8),r0
+	shll8	r0
+	add	r2,r0		! r0 = kernel stack tail
+	mov	r15,r2		! r2 = user stack top
+	mov	r0,r15		! switch kernel stack
+	mov.l	r1,@-r15	! TRA
+	sts.l	macl, @-r15
+	sts.l	mach, @-r15
+	stc.l	gbr, @-r15
+	mov.l	@(4*4,r2),r0
+	mov.l	r0,@-r15	! original SR
+	sts.l	pr,@-r15
+	mov.l	@(3*4,r2),r0
+	mov.l	r0,@-r15	! original PC
+	mov	r2,r0
+	add	#(3+2)*4,r0	! rewind r0 - r3 + exception frame
+	lds	r0,pr		! pr = original SP
+	movmu.l	r3,@-r15	! save regs
+	mov	r2,r8		! r8 =  previus stack top
+	mov	r1,r9		! r9 = interrupt vector
+	! restore previous stack
+	mov.l	@r8+,r2
+	mov.l	@r8+,r0
+	mov.l	@r8+,r1
+	bra	2f
+	 movml.l r2,@-r15
+1:
+	! in kernel exception
+	mov	r15,r2
+	add	#-((OFF_TRA + 4) - OFF_PC) + 5*4,r15
+	movmu.l	r3,@-r15
+	mov	r2,r8		! r8 = previous stack top
+	mov	r1,r9		! r9 = interrupt vector
+	! restore exception frame & regs
+	mov.l	@r8+,r2		! old R2
+	mov.l	@r8+,r0		! old R0
+	mov.l	@r8+,r1		! old R1
+	mov.l	@r8+,r10	! old PC
+	mov.l	@r8+,r11	! old SR
+	movml.l	r2,@-r15
+	mov.l	r10,@(OFF_PC,r15)
+	mov.l	r11,@(OFF_SR,r15)
+	mov.l	r8,@(OFF_SP,r15)	! save old sp
+	mov	r15,r8
+	add	#OFF_TRA + 4,r8
+	mov.l	r9,@-r8
+	sts.l	macl,@-r8
+	sts.l	mach,@-r8
+	stc.l	gbr,@-r8
+	add	#-4,r8
+	sts.l	pr,@-r8
+2:
+	! dispatch exception / interrupt
+	mov	#64,r8
+	cmp/hs	r8,r9
+	bt	interrupt_entry	! vec >= 64 is interrupt
+	mov	#32,r8
+	cmp/hs	r8,r9
+	bt	trap_entry	! 64 > vec >= 32  is trap
+
+	mov.l	4f,r8
+	mov	r9,r4
+	shll2	r9
+	add	r9,r8
+	mov.l	@r8,r8		! exception handler address
+	tst	r8,r8
+	bf	3f
+	mov.l	8f,r8		! unhandled exception
+3:
+	mov.l	5f,r10
+	jmp	@r8
+	 lds	r10,pr
+
+interrupt_entry:
+	mov	r9,r4
+	mov	r15,r5
+	mov.l	7f,r8
+	mov.l	6f,r9
+	jmp	@r8
+	 lds	r9,pr
+
+	.align	2
+4:	.long	exception_handling_table
+5:	.long	ret_from_exception
+6:	.long	ret_from_irq
+7:	.long	do_IRQ
+8:	.long	exception_error
+
+trap_entry:
+	mov	#0x30,r8
+	cmp/ge	r8,r9		! vector 0x20-0x2f is systemcall
+	bt	1f
+	add	#-0x10,r9	! convert SH2 to SH3/4 ABI
+1:	
+	shll2	r9			! TRA
+	bra	system_call	! jump common systemcall entry
+	 mov	r9,r8
+	
+#if defined(CONFIG_SH_STANDARD_BIOS)
+	/* Unwind the stack and jmp to the debug entry */
+ENTRY(sh_bios_handler)
+	mov	r15,r0
+	add	#(22-4)*4-4,r0
+	ldc.l	@r0+,gbr
+	lds.l	@r0+,mach
+	lds.l	@r0+,macl
+	mov	r15,r0
+	mov.l	@(OFF_SP,r0),r1
+	mov.l	@(OFF_SR,r2),r3
+	mov.l	r3,@-r1
+	mov.l	@(OFF_SP,r2),r3
+	mov.l	r3,@-r1
+	mov	r15,r0
+	add	#(22-4)*4-8,r0
+	mov.l	1f,r2
+	mov.l	@r2,r2
+	stc	sr,r3
+	mov.l	r2,@r0
+	mov.l	r3,@(4,r0)
+	mov.l	r1,@(8,r0)
+	movml.l	@r15+,r14
+	add	#8,r15
+	lds.l	@r15+, pr
+	rte
+	 mov.l	@r15+,r15
+	.align	2
+1:	.long	gdb_vbr_vector
+#endif /* CONFIG_SH_STANDARD_BIOS */
+
+ENTRY(address_error_trap_handler)
+	mov	r15,r4				! regs
+	mov.l	@(OFF_PC,r15),r6		! pc
+	mov.l	1f,r0
+	jmp	@r0
+	 mov	#0,r5				! writeaccess is unknown
+
+	.align	2
+1:	.long	do_address_error
+
+restore_all:
+	stc	sr,r0
+	or	#0xf0,r0
+	ldc	r0,sr				! all interrupt block (same BL = 1)
+	! restore special register
+	! overlap exception frame
+	mov	r15,r0
+	add	#17*4,r0
+	lds.l	@r0+,pr
+	add	#4,r0
+	ldc.l	@r0+,gbr
+	lds.l	@r0+,mach
+	lds.l	@r0+,macl
+	mov	r15,r0
+	mov.l	$cpu_mode,r2
+	bld.b	#6,@(OFF_SR,r15)
+	bst.b	#6,@(0,r2)			! save CPU mode
+	mov.l	@(OFF_SR,r0),r1
+	shll2	r1
+	shlr2	r1				! clear MD bit
+	mov.l	@(OFF_SP,r0),r2
+	add	#-8,r2
+	mov.l	r2,@(OFF_SP,r0)			! point exception frame top
+	mov.l	r1,@(4,r2)			! set sr
+	mov.l	@(OFF_PC,r0),r1
+	mov.l	r1,@r2				! set pc
+	get_current_thread_info r0, r1
+	mov.l	$current_thread_info,r1
+	mov.l	r0,@r1
+	movml.l	@r15+,r14
+	mov.l	@r15,r15
+	rte
+	 nop
+
+	.align 2
+$current_thread_info:
+	.long	__current_thread_info
+$cpu_mode:	
+	.long	__cpu_mode
+		
+! common exception handler
+#include "../../entry-common.S"
+	
+	.data
+! cpu operation mode 
+! bit30 = MD (compatible SH3/4)
+__cpu_mode:
+	.long	0x40000000
+		
+	.section	.bss
+__current_thread_info:
+	.long	0
+
+ENTRY(exception_handling_table)
+	.space	4*32
diff --git a/arch/sh/kernel/cpu/sh2a/ex.S b/arch/sh/kernel/cpu/sh2a/ex.S
new file mode 100644
index 000000000000..3ead9e63965a
--- /dev/null
+++ b/arch/sh/kernel/cpu/sh2a/ex.S
@@ -0,0 +1,72 @@
+/*
+ * arch/sh/kernel/cpu/sh2a/ex.S
+ *
+ * The SH-2A exception vector table
+ *
+ * Copyright (C) 2008 Yoshinori Sato
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#include <linux/linkage.h>
+
+!
+! convert Exception Vector to Exception Number
+!
+
+! exception no 0 to 255
+exception_entry0:
+no	=	0
+	.rept	256
+	mov.l	r1,@-sp
+	bra	exception_trampoline0
+	mov	#no,r1
+no	=	no + 1
+	.endr
+exception_trampoline0:
+	mov.l	r0,@-sp
+	mov.l	1f,r0
+	extu.b	r1,r1
+	jmp	@r0
+	  extu.w	r1,r1
+	 
+	.align	2
+1:	.long	exception_handler
+
+! exception no 256 to 511
+exception_entry1:
+no	=	0
+	.rept	256
+	mov.l	r1,@-sp
+	bra	exception_trampoline1
+	mov	#no,r1
+no	=	no + 1
+	.endr
+exception_trampoline1:
+	mov.l	r0,@-sp
+	extu.b	r1,r1
+	movi20	#0x100,r0
+	add	r0,r1
+	mov.l	1f,r0
+	jmp	@r0
+	  extu.w	r1,r1
+	
+	.align	2
+1:	.long	exception_handler
+
+	!
+! Exception Vector Base
+!
+	.align	2
+ENTRY(vbr_base)
+vector	=	0
+	.rept	256
+	.long	exception_entry0 + vector * 6
+vector	=	vector + 1
+	.endr
+	.rept	256
+	.long	exception_entry1 + vector * 6
+vector	=	vector + 1
+	.endr
diff --git a/arch/sh/kernel/cpu/sh3/entry.S b/arch/sh/kernel/cpu/sh3/entry.S
index 4004073f98cd..3fe482dd05c1 100644
--- a/arch/sh/kernel/cpu/sh3/entry.S
+++ b/arch/sh/kernel/cpu/sh3/entry.S
@@ -14,7 +14,7 @@
 #include <asm/asm-offsets.h>
 #include <asm/thread_info.h>
 #include <asm/unistd.h>
-#include <asm/cpu/mmu_context.h>
+#include <cpu/mmu_context.h>
 #include <asm/page.h>
 
 ! NOTE:
diff --git a/arch/sh/kernel/cpu/sh3/ex.S b/arch/sh/kernel/cpu/sh3/ex.S
index 11b6d9c6edae..dac429726899 100644
--- a/arch/sh/kernel/cpu/sh3/ex.S
+++ b/arch/sh/kernel/cpu/sh3/ex.S
@@ -4,7 +4,7 @@
  *  The SH-3 and SH-4 exception vector table.
 
  *  Copyright (C) 1999, 2000, 2002  Niibe Yutaka
- *  Copyright (C) 2003 - 2006  Paul Mundt
+ *  Copyright (C) 2003 - 2008  Paul Mundt
  *
  * This file is subject to the terms and conditions of the GNU General Public
  * License.  See the file "COPYING" in the main directory of this archive
@@ -12,13 +12,30 @@
  */
 #include <linux/linkage.h>
 
+#if !defined(CONFIG_MMU)
+#define	tlb_miss_load			exception_error
+#define tlb_miss_store			exception_error
+#define initial_page_write		exception_error
+#define tlb_protection_violation_load	exception_error
+#define tlb_protection_violation_store	exception_error
+#define address_error_load		exception_error
+#define address_error_store		exception_error
+#endif
+
+#if !defined(CONFIG_SH_FPU)
+#define	fpu_error_trap_handler		exception_error
+#endif
+
+#if !defined(CONFIG_KGDB_NMI)
+#define kgdb_handle_exception		exception_error
+#endif
+
 	.align 2
 	.data
 
 ENTRY(exception_handling_table)
 	.long	exception_error		/* 000 */
 	.long	exception_error
-#if defined(CONFIG_MMU)
 	.long	tlb_miss_load		/* 040 */
 	.long	tlb_miss_store
 	.long	initial_page_write
@@ -26,30 +43,13 @@ ENTRY(exception_handling_table)
 	.long	tlb_protection_violation_store
 	.long	address_error_load
 	.long	address_error_store	/* 100 */
-#else
-	.long	exception_error	! tlb miss load		/* 040 */
-	.long	exception_error	! tlb miss store
-	.long	exception_error	! initial page write
-	.long	exception_error	! tlb prot violation load
-	.long	exception_error	! tlb prot violation store
-	.long	exception_error	! address error load
-	.long	exception_error	! address error store	/* 100 */
-#endif
-#if defined(CONFIG_SH_FPU)
 	.long	fpu_error_trap_handler	/* 120 */
-#else
-	.long	exception_error		/* 120 */
-#endif
 	.long	exception_error		/* 140 */
 	.long	system_call	! Unconditional Trap	 /* 160 */
 	.long	exception_error	! reserved_instruction (filled by trap_init) /* 180 */
 	.long	exception_error	! illegal_slot_instruction (filled by trap_init) /*1A0*/
 ENTRY(nmi_slot)
-#if defined (CONFIG_KGDB_NMI)
 	.long	kgdb_handle_exception	/* 1C0 */	! Allow trap to debugger
-#else
-	.long	exception_none	/* 1C0 */	! Not implemented yet
-#endif
 ENTRY(user_break_point_trap)
 	.long	break_point_trap	/* 1E0 */
 
diff --git a/arch/sh/kernel/cpu/sh4/fpu.c b/arch/sh/kernel/cpu/sh4/fpu.c
index 8020796139f1..2d452f67fb87 100644
--- a/arch/sh/kernel/cpu/sh4/fpu.c
+++ b/arch/sh/kernel/cpu/sh4/fpu.c
@@ -13,7 +13,7 @@
 #include <linux/sched.h>
 #include <linux/signal.h>
 #include <linux/io.h>
-#include <asm/cpu/fpu.h>
+#include <cpu/fpu.h>
 #include <asm/processor.h>
 #include <asm/system.h>
 #include <asm/fpu.h>
diff --git a/arch/sh/kernel/cpu/sh4/probe.c b/arch/sh/kernel/cpu/sh4/probe.c
index be4926969181..2e42572b1b11 100644
--- a/arch/sh/kernel/cpu/sh4/probe.c
+++ b/arch/sh/kernel/cpu/sh4/probe.c
@@ -50,14 +50,18 @@ int __init detect_cpu_and_cache_system(void)
 	boot_cpu_data.dcache.ways		= 1;
 	boot_cpu_data.dcache.linesz		= L1_CACHE_BYTES;
 
+	/* We don't know the chip cut */
+	boot_cpu_data.cut_major = boot_cpu_data.cut_minor = -1;
+
 	/*
 	 * Setup some generic flags we can probe on SH-4A parts
 	 */
-	if (((pvr >> 24) & 0xff) == 0x10) {
+	if (((pvr >> 16) & 0xff) == 0x10) {
 		if ((cvr & 0x10000000) == 0)
 			boot_cpu_data.flags |= CPU_HAS_DSP;
 
 		boot_cpu_data.flags |= CPU_HAS_LLSC;
+		boot_cpu_data.cut_major = pvr & 0x7f;
 	}
 
 	/* FPU detection works for everyone */
diff --git a/arch/sh/kernel/cpu/sh4/softfloat.c b/arch/sh/kernel/cpu/sh4/softfloat.c
index 7b2d337ee412..828cb57cb959 100644
--- a/arch/sh/kernel/cpu/sh4/softfloat.c
+++ b/arch/sh/kernel/cpu/sh4/softfloat.c
@@ -36,7 +36,7 @@
  * and Kamel Khelifi <kamel.khelifi@st.com>
  */
 #include <linux/kernel.h>
-#include <asm/cpu/fpu.h>
+#include <cpu/fpu.h>
 
 #define LIT64( a ) a##LL
 
diff --git a/arch/sh/kernel/cpu/sh4/sq.c b/arch/sh/kernel/cpu/sh4/sq.c
index 9561b02ade0e..8a8a993f55ea 100644
--- a/arch/sh/kernel/cpu/sh4/sq.c
+++ b/arch/sh/kernel/cpu/sh4/sq.c
@@ -22,7 +22,7 @@
 #include <linux/io.h>
 #include <asm/page.h>
 #include <asm/cacheflush.h>
-#include <asm/cpu/sq.h>
+#include <cpu/sq.h>
 
 struct sq_mapping;
 
@@ -199,7 +199,7 @@ EXPORT_SYMBOL(sq_remap);
 
 /**
  * sq_unmap - Unmap a Store Queue allocation
- * @map: Pre-allocated Store Queue mapping.
+ * @vaddr: Pre-allocated Store Queue mapping.
  *
  * Unmaps the store queue allocation @map that was previously created by
  * sq_remap(). Also frees up the pte that was previously inserted into
diff --git a/arch/sh/kernel/cpu/sh4a/Makefile b/arch/sh/kernel/cpu/sh4a/Makefile
index a880e7968750..9381ad8da263 100644
--- a/arch/sh/kernel/cpu/sh4a/Makefile
+++ b/arch/sh/kernel/cpu/sh4a/Makefile
@@ -21,7 +21,7 @@ clock-$(CONFIG_CPU_SUBTYPE_SH7763)	:= clock-sh7763.o
 clock-$(CONFIG_CPU_SUBTYPE_SH7770)	:= clock-sh7770.o
 clock-$(CONFIG_CPU_SUBTYPE_SH7780)	:= clock-sh7780.o
 clock-$(CONFIG_CPU_SUBTYPE_SH7785)	:= clock-sh7785.o
-clock-$(CONFIG_CPU_SUBTYPE_SH7343)	:= clock-sh7343.o
+clock-$(CONFIG_CPU_SUBTYPE_SH7343)	:= clock-sh7722.o
 clock-$(CONFIG_CPU_SUBTYPE_SH7722)	:= clock-sh7722.o
 clock-$(CONFIG_CPU_SUBTYPE_SH7723)	:= clock-sh7722.o
 clock-$(CONFIG_CPU_SUBTYPE_SH7366)	:= clock-sh7722.o
diff --git a/arch/sh/kernel/cpu/sh4a/clock-sh7343.c b/arch/sh/kernel/cpu/sh4a/clock-sh7343.c
deleted file mode 100644
index 7adc4f16e95a..000000000000
--- a/arch/sh/kernel/cpu/sh4a/clock-sh7343.c
+++ /dev/null
@@ -1,99 +0,0 @@
-/*
- * arch/sh/kernel/cpu/sh4a/clock-sh7343.c
- *
- * SH7343/SH7722 support for the clock framework
- *
- *  Copyright (C) 2006  Paul Mundt
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/io.h>
-#include <asm/clock.h>
-#include <asm/freq.h>
-
-/*
- * SH7343/SH7722 uses a common set of multipliers and divisors, so this
- * is quite simple..
- */
-static int multipliers[] = { 1, 2, 1, 2, 1, 1, 1, 1, 1, 1, 1, 1, 1 };
-static int divisors[] = { 1, 3, 2, 5, 3, 4, 5, 6, 8, 10, 12, 16, 20 };
-
-#define pll_calc() (((ctrl_inl(FRQCR) >> 24) & 0x1f) + 1)
-
-static void master_clk_init(struct clk *clk)
-{
-	clk->parent = clk_get(NULL, "cpu_clk");
-}
-
-static void master_clk_recalc(struct clk *clk)
-{
-	int idx = (ctrl_inl(FRQCR) & 0x000f);
-	clk->rate *= clk->parent->rate * multipliers[idx] / divisors[idx];
-}
-
-static struct clk_ops sh7343_master_clk_ops = {
-	.init		= master_clk_init,
-	.recalc		= master_clk_recalc,
-};
-
-static void module_clk_init(struct clk *clk)
-{
-	clk->parent = NULL;
-	clk->rate = CONFIG_SH_PCLK_FREQ;
-}
-
-static struct clk_ops sh7343_module_clk_ops = {
-	.init		= module_clk_init,
-};
-
-static void bus_clk_init(struct clk *clk)
-{
-	clk->parent = clk_get(NULL, "cpu_clk");
-}
-
-static void bus_clk_recalc(struct clk *clk)
-{
-	int idx = (ctrl_inl(FRQCR) >> 8) & 0x000f;
-	clk->rate = clk->parent->rate * multipliers[idx] / divisors[idx];
-}
-
-static struct clk_ops sh7343_bus_clk_ops = {
-	.init		= bus_clk_init,
-	.recalc		= bus_clk_recalc,
-};
-
-static void cpu_clk_init(struct clk *clk)
-{
-	clk->parent = clk_get(NULL, "module_clk");
-	clk->flags |= CLK_RATE_PROPAGATES;
-	clk_set_rate(clk, clk_get_rate(clk));
-}
-
-static void cpu_clk_recalc(struct clk *clk)
-{
-	int idx = (ctrl_inl(FRQCR) >> 20) & 0x000f;
-	clk->rate = clk->parent->rate * pll_calc() *
-		multipliers[idx] / divisors[idx];
-}
-
-static struct clk_ops sh7343_cpu_clk_ops = {
-	.init		= cpu_clk_init,
-	.recalc		= cpu_clk_recalc,
-};
-
-static struct clk_ops *sh7343_clk_ops[] = {
-	&sh7343_master_clk_ops,
-	&sh7343_module_clk_ops,
-	&sh7343_bus_clk_ops,
-	&sh7343_cpu_clk_ops,
-};
-
-void __init arch_init_clk_ops(struct clk_ops **ops, int idx)
-{
-	if (idx < ARRAY_SIZE(sh7343_clk_ops))
-		*ops = sh7343_clk_ops[idx];
-}
diff --git a/arch/sh/kernel/cpu/sh4a/clock-sh7722.c b/arch/sh/kernel/cpu/sh4a/clock-sh7722.c
index 299138ebe160..db913855c2fd 100644
--- a/arch/sh/kernel/cpu/sh4a/clock-sh7722.c
+++ b/arch/sh/kernel/cpu/sh4a/clock-sh7722.c
@@ -1,7 +1,7 @@
 /*
  * arch/sh/kernel/cpu/sh4a/clock-sh7722.c
  *
- * SH7722 & SH7366 support for the clock framework
+ * SH7343, SH7722, SH7723 & SH7366 support for the clock framework
  *
  * Copyright (c) 2006-2007 Nomad Global Solutions Inc
  * Based on code for sh7343 by Paul Mundt
@@ -14,6 +14,7 @@
 #include <linux/kernel.h>
 #include <linux/io.h>
 #include <linux/errno.h>
+#include <linux/stringify.h>
 #include <asm/clock.h>
 #include <asm/freq.h>
 
@@ -411,40 +412,40 @@ static struct clk_ops sh7722_frqcr_clk_ops = {
  * clock ops methods for SIU A/B and IrDA clock
  *
  */
-static int sh7722_siu_which(struct clk *clk)
+
+#ifndef CONFIG_CPU_SUBTYPE_SH7343
+
+static int sh7722_siu_set_rate(struct clk *clk, unsigned long rate, int algo_id)
 {
-	if (!strcmp(clk->name, "siu_a_clk"))
-		return 0;
-	if (!strcmp(clk->name, "siu_b_clk"))
-		return 1;
-#if defined(CONFIG_CPU_SUBTYPE_SH7722)
-	if (!strcmp(clk->name, "irda_clk"))
-		return 2;
-#endif
-	return -EINVAL;
+	unsigned long r;
+	int div;
+
+	r = ctrl_inl(clk->arch_flags);
+	div = sh7722_find_divisors(clk->parent->rate, rate);
+	if (div < 0)
+		return div;
+	r = (r & ~0xF) | div;
+	ctrl_outl(r, clk->arch_flags);
+	return 0;
 }
 
-static unsigned long sh7722_siu_regs[] = {
-	[0] = SCLKACR,
-	[1] = SCLKBCR,
-#if defined(CONFIG_CPU_SUBTYPE_SH7722)
-	[2] = IrDACLKCR,
-#endif
-};
+static void sh7722_siu_recalc(struct clk *clk)
+{
+	unsigned long r;
+
+	r = ctrl_inl(clk->arch_flags);
+	clk->rate = clk->parent->rate * 2 / divisors2[r & 0xF];
+}
 
 static int sh7722_siu_start_stop(struct clk *clk, int enable)
 {
-	int siu = sh7722_siu_which(clk);
 	unsigned long r;
 
-	if (siu < 0)
-		return siu;
-	BUG_ON(siu > 2);
-	r = ctrl_inl(sh7722_siu_regs[siu]);
+	r = ctrl_inl(clk->arch_flags);
 	if (enable)
-		ctrl_outl(r & ~(1 << 8), sh7722_siu_regs[siu]);
+		ctrl_outl(r & ~(1 << 8), clk->arch_flags);
 	else
-		ctrl_outl(r | (1 << 8), sh7722_siu_regs[siu]);
+		ctrl_outl(r | (1 << 8), clk->arch_flags);
 	return 0;
 }
 
@@ -458,6 +459,15 @@ static void sh7722_siu_disable(struct clk *clk)
 	sh7722_siu_start_stop(clk, 0);
 }
 
+static struct clk_ops sh7722_siu_clk_ops = {
+	.recalc = sh7722_siu_recalc,
+	.set_rate = sh7722_siu_set_rate,
+	.enable = sh7722_siu_enable,
+	.disable = sh7722_siu_disable,
+};
+
+#endif /* CONFIG_CPU_SUBTYPE_SH7343 */
+
 static void sh7722_video_enable(struct clk *clk)
 {
 	unsigned long r;
@@ -494,43 +504,6 @@ static void sh7722_video_recalc(struct clk *clk)
 	clk->rate = clk->parent->rate / ((r & 0x3F) + 1);
 }
 
-static int sh7722_siu_set_rate(struct clk *clk, unsigned long rate, int algo_id)
-{
-	int siu = sh7722_siu_which(clk);
-	unsigned long r;
-	int div;
-
-	if (siu < 0)
-		return siu;
-	BUG_ON(siu > 2);
-	r = ctrl_inl(sh7722_siu_regs[siu]);
-	div = sh7722_find_divisors(clk->parent->rate, rate);
-	if (div < 0)
-		return div;
-	r = (r & ~0xF) | div;
-	ctrl_outl(r, sh7722_siu_regs[siu]);
-	return 0;
-}
-
-static void sh7722_siu_recalc(struct clk *clk)
-{
-	int siu = sh7722_siu_which(clk);
-	unsigned long r;
-
-	if (siu < 0)
-		return /* siu */ ;
-	BUG_ON(siu > 2);
-	r = ctrl_inl(sh7722_siu_regs[siu]);
-	clk->rate = clk->parent->rate * 2 / divisors2[r & 0xF];
-}
-
-static struct clk_ops sh7722_siu_clk_ops = {
-	.recalc = sh7722_siu_recalc,
-	.set_rate = sh7722_siu_set_rate,
-	.enable = sh7722_siu_enable,
-	.disable = sh7722_siu_disable,
-};
-
 static struct clk_ops sh7722_video_clk_ops = {
 	.recalc = sh7722_video_recalc,
 	.set_rate = sh7722_video_set_rate,
@@ -560,6 +533,9 @@ static struct clk sh7722_sdram_clock = {
 	.ops = &sh7722_frqcr_clk_ops,
 };
 
+
+#ifndef CONFIG_CPU_SUBTYPE_SH7343
+
 /*
  * these three clocks - SIU A, SIU B, IrDA - share the same clk_ops
  * methods of clk_ops determine which register they should access by
@@ -567,36 +543,151 @@ static struct clk sh7722_sdram_clock = {
  */
 static struct clk sh7722_siu_a_clock = {
 	.name = "siu_a_clk",
+	.arch_flags = SCLKACR,
 	.ops = &sh7722_siu_clk_ops,
 };
 
 static struct clk sh7722_siu_b_clock = {
 	.name = "siu_b_clk",
+	.arch_flags = SCLKBCR,
 	.ops = &sh7722_siu_clk_ops,
 };
 
 #if defined(CONFIG_CPU_SUBTYPE_SH7722)
 static struct clk sh7722_irda_clock = {
 	.name = "irda_clk",
+	.arch_flags = IrDACLKCR,
 	.ops = &sh7722_siu_clk_ops,
 };
 #endif
+#endif /* CONFIG_CPU_SUBTYPE_SH7343 */
 
 static struct clk sh7722_video_clock = {
 	.name = "video_clk",
 	.ops = &sh7722_video_clk_ops,
 };
 
+static int sh7722_mstpcr_start_stop(struct clk *clk, unsigned long reg,
+				    int enable)
+{
+	unsigned long bit = clk->arch_flags;
+	unsigned long r;
+
+	r = ctrl_inl(reg);
+
+	if (enable)
+		r &= ~(1 << bit);
+	else
+		r |= (1 << bit);
+
+	ctrl_outl(r, reg);
+	return 0;
+}
+
+static void sh7722_mstpcr0_enable(struct clk *clk)
+{
+	sh7722_mstpcr_start_stop(clk, MSTPCR0, 1);
+}
+
+static void sh7722_mstpcr0_disable(struct clk *clk)
+{
+	sh7722_mstpcr_start_stop(clk, MSTPCR0, 0);
+}
+
+static void sh7722_mstpcr1_enable(struct clk *clk)
+{
+	sh7722_mstpcr_start_stop(clk, MSTPCR1, 1);
+}
+
+static void sh7722_mstpcr1_disable(struct clk *clk)
+{
+	sh7722_mstpcr_start_stop(clk, MSTPCR1, 0);
+}
+
+static void sh7722_mstpcr2_enable(struct clk *clk)
+{
+	sh7722_mstpcr_start_stop(clk, MSTPCR2, 1);
+}
+
+static void sh7722_mstpcr2_disable(struct clk *clk)
+{
+	sh7722_mstpcr_start_stop(clk, MSTPCR2, 0);
+}
+
+static struct clk_ops sh7722_mstpcr0_clk_ops = {
+	.enable = sh7722_mstpcr0_enable,
+	.disable = sh7722_mstpcr0_disable,
+};
+
+static struct clk_ops sh7722_mstpcr1_clk_ops = {
+	.enable = sh7722_mstpcr1_enable,
+	.disable = sh7722_mstpcr1_disable,
+};
+
+static struct clk_ops sh7722_mstpcr2_clk_ops = {
+	.enable = sh7722_mstpcr2_enable,
+	.disable = sh7722_mstpcr2_disable,
+};
+
+#define DECLARE_MSTPCRN(regnr, bitnr, bitstr)		\
+{							\
+	.name = "mstp" __stringify(regnr) bitstr,	\
+	.arch_flags = bitnr,				\
+	.ops = &sh7722_mstpcr ## regnr ## _clk_ops,	\
+}
+
+#define DECLARE_MSTPCR(regnr) \
+	DECLARE_MSTPCRN(regnr, 31, "31"), \
+	DECLARE_MSTPCRN(regnr, 30, "30"), \
+	DECLARE_MSTPCRN(regnr, 29, "29"), \
+	DECLARE_MSTPCRN(regnr, 28, "28"), \
+	DECLARE_MSTPCRN(regnr, 27, "27"), \
+	DECLARE_MSTPCRN(regnr, 26, "26"), \
+	DECLARE_MSTPCRN(regnr, 25, "25"), \
+	DECLARE_MSTPCRN(regnr, 24, "24"), \
+	DECLARE_MSTPCRN(regnr, 23, "23"), \
+	DECLARE_MSTPCRN(regnr, 22, "22"), \
+	DECLARE_MSTPCRN(regnr, 21, "21"), \
+	DECLARE_MSTPCRN(regnr, 20, "20"), \
+	DECLARE_MSTPCRN(regnr, 19, "19"), \
+	DECLARE_MSTPCRN(regnr, 18, "18"), \
+	DECLARE_MSTPCRN(regnr, 17, "17"), \
+	DECLARE_MSTPCRN(regnr, 16, "16"), \
+	DECLARE_MSTPCRN(regnr, 15, "15"), \
+	DECLARE_MSTPCRN(regnr, 14, "14"), \
+	DECLARE_MSTPCRN(regnr, 13, "13"), \
+	DECLARE_MSTPCRN(regnr, 12, "12"), \
+	DECLARE_MSTPCRN(regnr, 11, "11"), \
+	DECLARE_MSTPCRN(regnr, 10, "10"), \
+	DECLARE_MSTPCRN(regnr, 9, "09"), \
+	DECLARE_MSTPCRN(regnr, 8, "08"), \
+	DECLARE_MSTPCRN(regnr, 7, "07"), \
+	DECLARE_MSTPCRN(regnr, 6, "06"), \
+	DECLARE_MSTPCRN(regnr, 5, "05"), \
+	DECLARE_MSTPCRN(regnr, 4, "04"), \
+	DECLARE_MSTPCRN(regnr, 3, "03"), \
+	DECLARE_MSTPCRN(regnr, 2, "02"), \
+	DECLARE_MSTPCRN(regnr, 1, "01"), \
+	DECLARE_MSTPCRN(regnr, 0, "00")
+
+static struct clk sh7722_mstpcr[] = {
+	DECLARE_MSTPCR(0),
+	DECLARE_MSTPCR(1),
+	DECLARE_MSTPCR(2),
+};
+
 static struct clk *sh7722_clocks[] = {
 	&sh7722_umem_clock,
 	&sh7722_sh_clock,
 	&sh7722_peripheral_clock,
 	&sh7722_sdram_clock,
+#ifndef CONFIG_CPU_SUBTYPE_SH7343
 	&sh7722_siu_a_clock,
 	&sh7722_siu_b_clock,
 #if defined(CONFIG_CPU_SUBTYPE_SH7722)
 	&sh7722_irda_clock,
 #endif
+#endif
 	&sh7722_video_clock,
 };
 
@@ -629,5 +720,11 @@ int __init arch_clk_init(void)
 		clk_register(sh7722_clocks[i]);
 	}
 	clk_put(master);
+
+	for (i = 0; i < ARRAY_SIZE(sh7722_mstpcr); i++) {
+		pr_debug( "Registering mstpcr '%s'\n", sh7722_mstpcr[i].name);
+		clk_register(&sh7722_mstpcr[i]);
+	}
+
 	return 0;
 }
diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7343.c b/arch/sh/kernel/cpu/sh4a/setup-sh7343.c
index 6d4f50cd4aaf..78881b4214da 100644
--- a/arch/sh/kernel/cpu/sh4a/setup-sh7343.c
+++ b/arch/sh/kernel/cpu/sh4a/setup-sh7343.c
@@ -11,6 +11,104 @@
 #include <linux/init.h>
 #include <linux/serial.h>
 #include <linux/serial_sci.h>
+#include <linux/uio_driver.h>
+#include <asm/clock.h>
+
+static struct resource iic0_resources[] = {
+	[0] = {
+		.name	= "IIC0",
+		.start  = 0x04470000,
+		.end    = 0x04470017,
+		.flags  = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start  = 96,
+		.end    = 99,
+		.flags  = IORESOURCE_IRQ,
+       },
+};
+
+static struct platform_device iic0_device = {
+	.name           = "i2c-sh_mobile",
+	.num_resources  = ARRAY_SIZE(iic0_resources),
+	.resource       = iic0_resources,
+};
+
+static struct resource iic1_resources[] = {
+	[0] = {
+		.name	= "IIC1",
+		.start  = 0x04750000,
+		.end    = 0x04750017,
+		.flags  = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start  = 44,
+		.end    = 47,
+		.flags  = IORESOURCE_IRQ,
+       },
+};
+
+static struct platform_device iic1_device = {
+	.name           = "i2c-sh_mobile",
+	.num_resources  = ARRAY_SIZE(iic1_resources),
+	.resource       = iic1_resources,
+};
+
+static struct uio_info vpu_platform_data = {
+	.name = "VPU4",
+	.version = "0",
+	.irq = 60,
+};
+
+static struct resource vpu_resources[] = {
+	[0] = {
+		.name	= "VPU",
+		.start	= 0xfe900000,
+		.end	= 0xfe9022eb,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		/* place holder for contiguous memory */
+	},
+};
+
+static struct platform_device vpu_device = {
+	.name		= "uio_pdrv_genirq",
+	.id		= 0,
+	.dev = {
+		.platform_data	= &vpu_platform_data,
+	},
+	.resource	= vpu_resources,
+	.num_resources	= ARRAY_SIZE(vpu_resources),
+};
+
+static struct uio_info veu_platform_data = {
+	.name = "VEU",
+	.version = "0",
+	.irq = 54,
+};
+
+static struct resource veu_resources[] = {
+	[0] = {
+		.name	= "VEU",
+		.start	= 0xfe920000,
+		.end	= 0xfe9200b7,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		/* place holder for contiguous memory */
+	},
+};
+
+static struct platform_device veu_device = {
+	.name		= "uio_pdrv_genirq",
+	.id		= 1,
+	.dev = {
+		.platform_data	= &veu_platform_data,
+	},
+	.resource	= veu_resources,
+	.num_resources	= ARRAY_SIZE(veu_resources),
+};
 
 static struct plat_sci_port sci_platform_data[] = {
 	{
@@ -32,16 +130,171 @@ static struct platform_device sci_device = {
 };
 
 static struct platform_device *sh7343_devices[] __initdata = {
+	&iic0_device,
+	&iic1_device,
 	&sci_device,
+	&vpu_device,
+	&veu_device,
 };
 
 static int __init sh7343_devices_setup(void)
 {
+	clk_always_enable("mstp031"); /* TLB */
+	clk_always_enable("mstp030"); /* IC */
+	clk_always_enable("mstp029"); /* OC */
+	clk_always_enable("mstp028"); /* URAM */
+	clk_always_enable("mstp026"); /* XYMEM */
+	clk_always_enable("mstp023"); /* INTC3 */
+	clk_always_enable("mstp022"); /* INTC */
+	clk_always_enable("mstp020"); /* SuperHyway */
+	clk_always_enable("mstp109"); /* I2C0 */
+	clk_always_enable("mstp108"); /* I2C1 */
+	clk_always_enable("mstp202"); /* VEU */
+	clk_always_enable("mstp201"); /* VPU */
+
+	platform_resource_setup_memory(&vpu_device, "vpu", 1 << 20);
+	platform_resource_setup_memory(&veu_device, "veu", 2 << 20);
+
 	return platform_add_devices(sh7343_devices,
 				    ARRAY_SIZE(sh7343_devices));
 }
 __initcall(sh7343_devices_setup);
 
+enum {
+	UNUSED = 0,
+
+	/* interrupt sources */
+	IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7,
+	DMAC0, DMAC1, DMAC2, DMAC3,
+	VIO_CEUI, VIO_BEUI, VIO_VEUI, VOU,
+	MFI, VPU, TPU, Z3D4, USBI0, USBI1,
+	MMC_ERR, MMC_TRAN, MMC_FSTAT, MMC_FRDY,
+	DMAC4, DMAC5, DMAC_DADERR,
+	KEYSC,
+	SCIF, SCIF1, SCIF2, SCIF3, SCIF4,
+	SIOF0, SIOF1, SIO,
+	FLCTL_FLSTEI, FLCTL_FLENDI, FLCTL_FLTREQ0I, FLCTL_FLTREQ1I,
+	I2C0_ALI, I2C0_TACKI, I2C0_WAITI, I2C0_DTEI,
+	I2C1_ALI, I2C1_TACKI, I2C1_WAITI, I2C1_DTEI,
+	SIM_TEI, SIM_TXI, SIM_RXI, SIM_ERI,
+	IRDA,
+	SDHI0, SDHI1, SDHI2, SDHI3,
+	CMT, TSIF, SIU,
+	TMU0, TMU1, TMU2,
+	JPU, LCDC,
+
+	/* interrupt groups */
+
+	DMAC0123, VIOVOU, MMC, DMAC45, FLCTL, I2C0, I2C1, SIM, SDHI, USB,
+};
+
+static struct intc_vect vectors[] __initdata = {
+	INTC_VECT(IRQ0, 0x600), INTC_VECT(IRQ1, 0x620),
+	INTC_VECT(IRQ2, 0x640), INTC_VECT(IRQ3, 0x660),
+	INTC_VECT(IRQ4, 0x680), INTC_VECT(IRQ5, 0x6a0),
+	INTC_VECT(IRQ6, 0x6c0), INTC_VECT(IRQ7, 0x6e0),
+	INTC_VECT(I2C1_ALI, 0x780), INTC_VECT(I2C1_TACKI, 0x7a0),
+	INTC_VECT(I2C1_WAITI, 0x7c0), INTC_VECT(I2C1_DTEI, 0x7e0),
+	INTC_VECT(DMAC0, 0x800), INTC_VECT(DMAC1, 0x820),
+	INTC_VECT(DMAC2, 0x840), INTC_VECT(DMAC3, 0x860),
+	INTC_VECT(VIO_CEUI, 0x880), INTC_VECT(VIO_BEUI, 0x8a0),
+	INTC_VECT(VIO_VEUI, 0x8c0), INTC_VECT(VOU, 0x8e0),
+	INTC_VECT(MFI, 0x900), INTC_VECT(VPU, 0x980),
+	INTC_VECT(TPU, 0x9a0), INTC_VECT(Z3D4, 0x9e0),
+	INTC_VECT(USBI0, 0xa20), INTC_VECT(USBI1, 0xa40),
+	INTC_VECT(MMC_ERR, 0xb00), INTC_VECT(MMC_TRAN, 0xb20),
+	INTC_VECT(MMC_FSTAT, 0xb40), INTC_VECT(MMC_FRDY, 0xb60),
+	INTC_VECT(DMAC4, 0xb80), INTC_VECT(DMAC5, 0xba0),
+	INTC_VECT(DMAC_DADERR, 0xbc0), INTC_VECT(KEYSC, 0xbe0),
+	INTC_VECT(SCIF, 0xc00), INTC_VECT(SCIF1, 0xc20),
+	INTC_VECT(SCIF2, 0xc40), INTC_VECT(SCIF3, 0xc60),
+	INTC_VECT(SIOF0, 0xc80), INTC_VECT(SIOF1, 0xca0),
+	INTC_VECT(SIO, 0xd00),
+	INTC_VECT(FLCTL_FLSTEI, 0xd80), INTC_VECT(FLCTL_FLENDI, 0xda0),
+	INTC_VECT(FLCTL_FLTREQ0I, 0xdc0), INTC_VECT(FLCTL_FLTREQ1I, 0xde0),
+	INTC_VECT(I2C0_ALI, 0xe00), INTC_VECT(I2C0_TACKI, 0xe20),
+	INTC_VECT(I2C0_WAITI, 0xe40), INTC_VECT(I2C0_DTEI, 0xe60),
+	INTC_VECT(SDHI0, 0xe80), INTC_VECT(SDHI1, 0xea0),
+	INTC_VECT(SDHI2, 0xec0), INTC_VECT(SDHI3, 0xee0),
+	INTC_VECT(CMT, 0xf00), INTC_VECT(TSIF, 0xf20),
+	INTC_VECT(SIU, 0xf80),
+	INTC_VECT(TMU0, 0x400), INTC_VECT(TMU1, 0x420),
+	INTC_VECT(TMU2, 0x440),
+	INTC_VECT(JPU, 0x560), INTC_VECT(LCDC, 0x580),
+};
+
+static struct intc_group groups[] __initdata = {
+	INTC_GROUP(DMAC0123, DMAC0, DMAC1, DMAC2, DMAC3),
+	INTC_GROUP(VIOVOU, VIO_CEUI, VIO_BEUI, VIO_VEUI, VOU),
+	INTC_GROUP(MMC, MMC_FRDY, MMC_FSTAT, MMC_TRAN, MMC_ERR),
+	INTC_GROUP(DMAC45, DMAC4, DMAC5, DMAC_DADERR),
+	INTC_GROUP(FLCTL, FLCTL_FLSTEI, FLCTL_FLENDI,
+		   FLCTL_FLTREQ0I, FLCTL_FLTREQ1I),
+	INTC_GROUP(I2C0, I2C0_ALI, I2C0_TACKI, I2C0_WAITI, I2C0_DTEI),
+	INTC_GROUP(I2C1, I2C1_ALI, I2C1_TACKI, I2C1_WAITI, I2C1_DTEI),
+	INTC_GROUP(SIM, SIM_TEI, SIM_TXI, SIM_RXI, SIM_ERI),
+	INTC_GROUP(SDHI, SDHI0, SDHI1, SDHI2, SDHI3),
+	INTC_GROUP(USB, USBI0, USBI1),
+};
+
+static struct intc_mask_reg mask_registers[] __initdata = {
+	{ 0xa4080084, 0xa40800c4, 8, /* IMR1 / IMCR1 */
+	  { VOU, VIO_VEUI, VIO_BEUI, VIO_CEUI, DMAC3, DMAC2, DMAC1, DMAC0 } },
+	{ 0xa4080088, 0xa40800c8, 8, /* IMR2 / IMCR2 */
+	  { 0, 0, 0, VPU, 0, 0, 0, MFI } },
+	{ 0xa408008c, 0xa40800cc, 8, /* IMR3 / IMCR3 */
+	  { SIM_TEI, SIM_TXI, SIM_RXI, SIM_ERI, 0, 0, 0, IRDA } },
+	{ 0xa4080090, 0xa40800d0, 8, /* IMR4 / IMCR4 */
+	  { 0, TMU2, TMU1, TMU0, JPU, 0, 0, LCDC } },
+	{ 0xa4080094, 0xa40800d4, 8, /* IMR5 / IMCR5 */
+	  { KEYSC, DMAC_DADERR, DMAC5, DMAC4, SCIF3, SCIF2, SCIF1, SCIF } },
+	{ 0xa4080098, 0xa40800d8, 8, /* IMR6 / IMCR6 */
+	  { 0, 0, 0, SIO, Z3D4, 0, SIOF1, SIOF0 } },
+	{ 0xa408009c, 0xa40800dc, 8, /* IMR7 / IMCR7 */
+	  { I2C0_DTEI, I2C0_WAITI, I2C0_TACKI, I2C0_ALI,
+	    FLCTL_FLTREQ1I, FLCTL_FLTREQ0I, FLCTL_FLENDI, FLCTL_FLSTEI } },
+	{ 0xa40800a0, 0xa40800e0, 8, /* IMR8 / IMCR8 */
+	  { SDHI3, SDHI2, SDHI1, SDHI0, 0, 0, 0, SIU } },
+	{ 0xa40800a4, 0xa40800e4, 8, /* IMR9 / IMCR9 */
+	  { 0, 0, 0, CMT, 0, USBI1, USBI0 } },
+	{ 0xa40800a8, 0xa40800e8, 8, /* IMR10 / IMCR10 */
+	  { MMC_FRDY, MMC_FSTAT, MMC_TRAN, MMC_ERR } },
+	{ 0xa40800ac, 0xa40800ec, 8, /* IMR11 / IMCR11 */
+	  { I2C1_DTEI, I2C1_WAITI, I2C1_TACKI, I2C1_ALI, TPU, 0, 0, TSIF } },
+	{ 0xa4140044, 0xa4140064, 8, /* INTMSK00 / INTMSKCLR00 */
+	  { IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7 } },
+};
+
+static struct intc_prio_reg prio_registers[] __initdata = {
+	{ 0xa4080000, 0, 16, 4, /* IPRA */ { TMU0, TMU1, TMU2 } },
+	{ 0xa4080004, 0, 16, 4, /* IPRB */ { JPU, LCDC, SIM } },
+	{ 0xa4080010, 0, 16, 4, /* IPRE */ { DMAC0123, VIOVOU, MFI, VPU } },
+	{ 0xa4080014, 0, 16, 4, /* IPRF */ { KEYSC, DMAC45, USB, CMT } },
+	{ 0xa4080018, 0, 16, 4, /* IPRG */ { SCIF, SCIF1, SCIF2, SCIF3 } },
+	{ 0xa408001c, 0, 16, 4, /* IPRH */ { SIOF0, SIOF1, FLCTL, I2C0 } },
+	{ 0xa4080020, 0, 16, 4, /* IPRI */ { SIO, 0, TSIF, I2C1 } },
+	{ 0xa4080024, 0, 16, 4, /* IPRJ */ { Z3D4, 0, SIU } },
+	{ 0xa4080028, 0, 16, 4, /* IPRK */ { 0, MMC, 0, SDHI } },
+	{ 0xa408002c, 0, 16, 4, /* IPRL */ { 0, 0, TPU } },
+	{ 0xa4140010, 0, 32, 4, /* INTPRI00 */
+	  { IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7 } },
+};
+
+static struct intc_sense_reg sense_registers[] __initdata = {
+	{ 0xa414001c, 16, 2, /* ICR1 */
+	  { IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7 } },
+};
+
+static struct intc_mask_reg ack_registers[] __initdata = {
+	{ 0xa4140024, 0, 8, /* INTREQ00 */
+	  { IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7 } },
+};
+
+static DECLARE_INTC_DESC_ACK(intc_desc, "sh7343", vectors, groups,
+			     mask_registers, prio_registers, sense_registers,
+			     ack_registers);
+
 void __init plat_irq_setup(void)
 {
+	register_intc_controller(&intc_desc);
 }
diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7366.c b/arch/sh/kernel/cpu/sh4a/setup-sh7366.c
index f26b5cdad0d1..6851dba02f31 100644
--- a/arch/sh/kernel/cpu/sh4a/setup-sh7366.c
+++ b/arch/sh/kernel/cpu/sh4a/setup-sh7366.c
@@ -13,6 +13,112 @@
 #include <linux/init.h>
 #include <linux/serial.h>
 #include <linux/serial_sci.h>
+#include <linux/uio_driver.h>
+#include <asm/clock.h>
+
+static struct resource iic_resources[] = {
+	[0] = {
+		.name	= "IIC",
+		.start  = 0x04470000,
+		.end    = 0x04470017,
+		.flags  = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start  = 96,
+		.end    = 99,
+		.flags  = IORESOURCE_IRQ,
+       },
+};
+
+static struct platform_device iic_device = {
+	.name           = "i2c-sh_mobile",
+	.num_resources  = ARRAY_SIZE(iic_resources),
+	.resource       = iic_resources,
+};
+
+static struct uio_info vpu_platform_data = {
+	.name = "VPU5",
+	.version = "0",
+	.irq = 60,
+};
+
+static struct resource vpu_resources[] = {
+	[0] = {
+		.name	= "VPU",
+		.start	= 0xfe900000,
+		.end	= 0xfe902807,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		/* place holder for contiguous memory */
+	},
+};
+
+static struct platform_device vpu_device = {
+	.name		= "uio_pdrv_genirq",
+	.id		= 0,
+	.dev = {
+		.platform_data	= &vpu_platform_data,
+	},
+	.resource	= vpu_resources,
+	.num_resources	= ARRAY_SIZE(vpu_resources),
+};
+
+static struct uio_info veu0_platform_data = {
+	.name = "VEU",
+	.version = "0",
+	.irq = 54,
+};
+
+static struct resource veu0_resources[] = {
+	[0] = {
+		.name	= "VEU(1)",
+		.start	= 0xfe920000,
+		.end	= 0xfe9200b7,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		/* place holder for contiguous memory */
+	},
+};
+
+static struct platform_device veu0_device = {
+	.name		= "uio_pdrv_genirq",
+	.id		= 1,
+	.dev = {
+		.platform_data	= &veu0_platform_data,
+	},
+	.resource	= veu0_resources,
+	.num_resources	= ARRAY_SIZE(veu0_resources),
+};
+
+static struct uio_info veu1_platform_data = {
+	.name = "VEU",
+	.version = "0",
+	.irq = 27,
+};
+
+static struct resource veu1_resources[] = {
+	[0] = {
+		.name	= "VEU(2)",
+		.start	= 0xfe924000,
+		.end	= 0xfe9240b7,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		/* place holder for contiguous memory */
+	},
+};
+
+static struct platform_device veu1_device = {
+	.name		= "uio_pdrv_genirq",
+	.id		= 2,
+	.dev = {
+		.platform_data	= &veu1_platform_data,
+	},
+	.resource	= veu1_resources,
+	.num_resources	= ARRAY_SIZE(veu1_resources),
+};
 
 static struct plat_sci_port sci_platform_data[] = {
 	{
@@ -34,11 +140,32 @@ static struct platform_device sci_device = {
 };
 
 static struct platform_device *sh7366_devices[] __initdata = {
+	&iic_device,
 	&sci_device,
+	&vpu_device,
+	&veu0_device,
+	&veu1_device,
 };
 
 static int __init sh7366_devices_setup(void)
 {
+	clk_always_enable("mstp031"); /* TLB */
+	clk_always_enable("mstp030"); /* IC */
+	clk_always_enable("mstp029"); /* OC */
+	clk_always_enable("mstp028"); /* RSMEM */
+	clk_always_enable("mstp026"); /* XYMEM */
+	clk_always_enable("mstp023"); /* INTC3 */
+	clk_always_enable("mstp022"); /* INTC */
+	clk_always_enable("mstp020"); /* SuperHyway */
+	clk_always_enable("mstp109"); /* I2C */
+	clk_always_enable("mstp207"); /* VEU-2 */
+	clk_always_enable("mstp202"); /* VEU-1 */
+	clk_always_enable("mstp201"); /* VPU */
+
+	platform_resource_setup_memory(&vpu_device, "vpu", 2 << 20);
+	platform_resource_setup_memory(&veu0_device, "veu0", 2 << 20);
+	platform_resource_setup_memory(&veu1_device, "veu1", 2 << 20);
+
 	return platform_add_devices(sh7366_devices,
 				    ARRAY_SIZE(sh7366_devices));
 }
@@ -97,7 +224,7 @@ static struct intc_vect vectors[] __initdata = {
 	INTC_VECT(SIU, 0xf80),
 	INTC_VECT(TMU0, 0x400), INTC_VECT(TMU1, 0x420),
 	INTC_VECT(TMU2, 0x440),
-	INTC_VECT(VEU2, 0x580), INTC_VECT(LCDC, 0x580),
+	INTC_VECT(VEU2, 0x560), INTC_VECT(LCDC, 0x580),
 };
 
 static struct intc_group groups[] __initdata = {
@@ -163,8 +290,14 @@ static struct intc_sense_reg sense_registers[] __initdata = {
 	  { IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7 } },
 };
 
-static DECLARE_INTC_DESC(intc_desc, "sh7366", vectors, groups,
-			 mask_registers, prio_registers, sense_registers);
+static struct intc_mask_reg ack_registers[] __initdata = {
+	{ 0xa4140024, 0, 8, /* INTREQ00 */
+	  { IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7 } },
+};
+
+static DECLARE_INTC_DESC_ACK(intc_desc, "sh7366", vectors, groups,
+			     mask_registers, prio_registers, sense_registers,
+			     ack_registers);
 
 void __init plat_irq_setup(void)
 {
diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7722.c b/arch/sh/kernel/cpu/sh4a/setup-sh7722.c
index 62ebccf18b3c..de1ede92176e 100644
--- a/arch/sh/kernel/cpu/sh4a/setup-sh7722.c
+++ b/arch/sh/kernel/cpu/sh4a/setup-sh7722.c
@@ -12,6 +12,8 @@
 #include <linux/serial.h>
 #include <linux/serial_sci.h>
 #include <linux/mm.h>
+#include <linux/uio_driver.h>
+#include <asm/clock.h>
 #include <asm/mmzone.h>
 
 static struct resource usbf_resources[] = {
@@ -59,6 +61,62 @@ static struct platform_device iic_device = {
 	.resource       = iic_resources,
 };
 
+static struct uio_info vpu_platform_data = {
+	.name = "VPU4",
+	.version = "0",
+	.irq = 60,
+};
+
+static struct resource vpu_resources[] = {
+	[0] = {
+		.name	= "VPU",
+		.start	= 0xfe900000,
+		.end	= 0xfe9022eb,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		/* place holder for contiguous memory */
+	},
+};
+
+static struct platform_device vpu_device = {
+	.name		= "uio_pdrv_genirq",
+	.id		= 0,
+	.dev = {
+		.platform_data	= &vpu_platform_data,
+	},
+	.resource	= vpu_resources,
+	.num_resources	= ARRAY_SIZE(vpu_resources),
+};
+
+static struct uio_info veu_platform_data = {
+	.name = "VEU",
+	.version = "0",
+	.irq = 54,
+};
+
+static struct resource veu_resources[] = {
+	[0] = {
+		.name	= "VEU",
+		.start	= 0xfe920000,
+		.end	= 0xfe9200b7,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		/* place holder for contiguous memory */
+	},
+};
+
+static struct platform_device veu_device = {
+	.name		= "uio_pdrv_genirq",
+	.id		= 1,
+	.dev = {
+		.platform_data	= &veu_platform_data,
+	},
+	.resource	= veu_resources,
+	.num_resources	= ARRAY_SIZE(veu_resources),
+};
+
 static struct plat_sci_port sci_platform_data[] = {
 	{
 		.mapbase	= 0xffe00000,
@@ -95,10 +153,27 @@ static struct platform_device *sh7722_devices[] __initdata = {
 	&usbf_device,
 	&iic_device,
 	&sci_device,
+	&vpu_device,
+	&veu_device,
 };
 
 static int __init sh7722_devices_setup(void)
 {
+	clk_always_enable("mstp031"); /* TLB */
+	clk_always_enable("mstp030"); /* IC */
+	clk_always_enable("mstp029"); /* OC */
+	clk_always_enable("mstp028"); /* URAM */
+	clk_always_enable("mstp026"); /* XYMEM */
+	clk_always_enable("mstp022"); /* INTC */
+	clk_always_enable("mstp020"); /* SuperHyway */
+	clk_always_enable("mstp109"); /* I2C */
+	clk_always_enable("mstp211"); /* USB */
+	clk_always_enable("mstp202"); /* VEU */
+	clk_always_enable("mstp201"); /* VPU */
+
+	platform_resource_setup_memory(&vpu_device, "vpu", 1 << 20);
+	platform_resource_setup_memory(&veu_device, "veu", 2 << 20);
+
 	return platform_add_devices(sh7722_devices,
 				    ARRAY_SIZE(sh7722_devices));
 }
@@ -229,8 +304,14 @@ static struct intc_sense_reg sense_registers[] __initdata = {
 	  { IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7 } },
 };
 
-static DECLARE_INTC_DESC(intc_desc, "sh7722", vectors, groups,
-			 mask_registers, prio_registers, sense_registers);
+static struct intc_mask_reg ack_registers[] __initdata = {
+	{ 0xa4140024, 0, 8, /* INTREQ00 */
+	  { IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7 } },
+};
+
+static DECLARE_INTC_DESC_ACK(intc_desc, "sh7722", vectors, groups,
+			     mask_registers, prio_registers, sense_registers,
+			     ack_registers);
 
 void __init plat_irq_setup(void)
 {
diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7723.c b/arch/sh/kernel/cpu/sh4a/setup-sh7723.c
index a0470f2f5479..a7412cede534 100644
--- a/arch/sh/kernel/cpu/sh4a/setup-sh7723.c
+++ b/arch/sh/kernel/cpu/sh4a/setup-sh7723.c
@@ -12,8 +12,94 @@
 #include <linux/serial.h>
 #include <linux/mm.h>
 #include <linux/serial_sci.h>
+#include <linux/uio_driver.h>
+#include <asm/clock.h>
 #include <asm/mmzone.h>
 
+static struct uio_info vpu_platform_data = {
+	.name = "VPU5",
+	.version = "0",
+	.irq = 60,
+};
+
+static struct resource vpu_resources[] = {
+	[0] = {
+		.name	= "VPU",
+		.start	= 0xfe900000,
+		.end	= 0xfe902807,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		/* place holder for contiguous memory */
+	},
+};
+
+static struct platform_device vpu_device = {
+	.name		= "uio_pdrv_genirq",
+	.id		= 0,
+	.dev = {
+		.platform_data	= &vpu_platform_data,
+	},
+	.resource	= vpu_resources,
+	.num_resources	= ARRAY_SIZE(vpu_resources),
+};
+
+static struct uio_info veu0_platform_data = {
+	.name = "VEU2H",
+	.version = "0",
+	.irq = 54,
+};
+
+static struct resource veu0_resources[] = {
+	[0] = {
+		.name	= "VEU2H0",
+		.start	= 0xfe920000,
+		.end	= 0xfe92027b,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		/* place holder for contiguous memory */
+	},
+};
+
+static struct platform_device veu0_device = {
+	.name		= "uio_pdrv_genirq",
+	.id		= 1,
+	.dev = {
+		.platform_data	= &veu0_platform_data,
+	},
+	.resource	= veu0_resources,
+	.num_resources	= ARRAY_SIZE(veu0_resources),
+};
+
+static struct uio_info veu1_platform_data = {
+	.name = "VEU2H",
+	.version = "0",
+	.irq = 27,
+};
+
+static struct resource veu1_resources[] = {
+	[0] = {
+		.name	= "VEU2H1",
+		.start	= 0xfe924000,
+		.end	= 0xfe92427b,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		/* place holder for contiguous memory */
+	},
+};
+
+static struct platform_device veu1_device = {
+	.name		= "uio_pdrv_genirq",
+	.id		= 2,
+	.dev = {
+		.platform_data	= &veu1_platform_data,
+	},
+	.resource	= veu1_resources,
+	.num_resources	= ARRAY_SIZE(veu1_resources),
+};
+
 static struct plat_sci_port sci_platform_data[] = {
 	{
 		.mapbase        = 0xffe00000,
@@ -113,14 +199,56 @@ static struct platform_device sh7723_usb_host_device = {
 	.resource	= sh7723_usb_host_resources,
 };
 
+static struct resource iic_resources[] = {
+	[0] = {
+		.name	= "IIC",
+		.start  = 0x04470000,
+		.end    = 0x04470017,
+		.flags  = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start  = 96,
+		.end    = 99,
+		.flags  = IORESOURCE_IRQ,
+       },
+};
+
+static struct platform_device iic_device = {
+	.name           = "i2c-sh_mobile",
+	.num_resources  = ARRAY_SIZE(iic_resources),
+	.resource       = iic_resources,
+};
+
 static struct platform_device *sh7723_devices[] __initdata = {
 	&sci_device,
 	&rtc_device,
+	&iic_device,
 	&sh7723_usb_host_device,
+	&vpu_device,
+	&veu0_device,
+	&veu1_device,
 };
 
 static int __init sh7723_devices_setup(void)
 {
+	clk_always_enable("mstp031"); /* TLB */
+	clk_always_enable("mstp030"); /* IC */
+	clk_always_enable("mstp029"); /* OC */
+	clk_always_enable("mstp024"); /* FPU */
+	clk_always_enable("mstp022"); /* INTC */
+	clk_always_enable("mstp020"); /* SuperHyway */
+	clk_always_enable("mstp000"); /* MERAM */
+	clk_always_enable("mstp109"); /* I2C */
+	clk_always_enable("mstp108"); /* RTC */
+	clk_always_enable("mstp211"); /* USB */
+	clk_always_enable("mstp206"); /* VEU2H1 */
+	clk_always_enable("mstp202"); /* VEU2H0 */
+	clk_always_enable("mstp201"); /* VPU */
+
+	platform_resource_setup_memory(&vpu_device, "vpu", 2 << 20);
+	platform_resource_setup_memory(&veu0_device, "veu0", 2 << 20);
+	platform_resource_setup_memory(&veu1_device, "veu1", 2 << 20);
+
 	return platform_add_devices(sh7723_devices,
 				    ARRAY_SIZE(sh7723_devices));
 }
@@ -326,8 +454,14 @@ static struct intc_sense_reg sense_registers[] __initdata = {
 	  { IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7 } },
 };
 
-static DECLARE_INTC_DESC(intc_desc, "sh7723", vectors, groups,
-			 mask_registers, prio_registers, sense_registers);
+static struct intc_mask_reg ack_registers[] __initdata = {
+	{ 0xa4140024, 0, 8, /* INTREQ00 */
+	  { IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7 } },
+};
+
+static DECLARE_INTC_DESC_ACK(intc_desc, "sh7723", vectors, groups,
+			     mask_registers, prio_registers, sense_registers,
+			     ack_registers);
 
 void __init plat_irq_setup(void)
 {
diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7763.c b/arch/sh/kernel/cpu/sh4a/setup-sh7763.c
index f189a559462b..3c5b629887a8 100644
--- a/arch/sh/kernel/cpu/sh4a/setup-sh7763.c
+++ b/arch/sh/kernel/cpu/sh4a/setup-sh7763.c
@@ -3,6 +3,7 @@
  *
  *  Copyright (C) 2006  Paul Mundt
  *  Copyright (C) 2007  Yoshihiro Shimoda
+ *  Copyright (C) 2008  Nobuhiro Iwamatsu
  *
  * This file is subject to the terms and conditions of the GNU General Public
  * License.  See the file "COPYING" in the main directory of this archive
@@ -56,6 +57,11 @@ static struct plat_sci_port sci_platform_data[] = {
 		.type		= PORT_SCIF,
 		.irqs		= { 76, 77, 79, 78 },
 	}, {
+		.mapbase	= 0xffe10000,
+		.flags		= UPF_BOOT_AUTOCONF,
+		.type		= PORT_SCIF,
+		.irqs		= { 104, 105, 107, 106 },
+	}, {
 		.flags = 0,
 	}
 };
@@ -208,8 +214,8 @@ static struct intc_vect vectors[] __initdata = {
 	INTC_VECT(TMU5, 0xe40), INTC_VECT(ADC, 0xe60),
 	INTC_VECT(SSI0, 0xe80), INTC_VECT(SSI1, 0xea0),
 	INTC_VECT(SSI2, 0xec0), INTC_VECT(SSI3, 0xee0),
-	INTC_VECT(SCIF1_ERI, 0xf00), INTC_VECT(SCIF1_RXI, 0xf20),
-	INTC_VECT(SCIF1_BRI, 0xf40), INTC_VECT(SCIF1_TXI, 0xf60),
+	INTC_VECT(SCIF2_ERI, 0xf00), INTC_VECT(SCIF2_RXI, 0xf20),
+	INTC_VECT(SCIF2_BRI, 0xf40), INTC_VECT(SCIF2_TXI, 0xf60),
 	INTC_VECT(GPIO_CH0, 0xf80), INTC_VECT(GPIO_CH1, 0xfa0),
 	INTC_VECT(GPIO_CH2, 0xfc0), INTC_VECT(GPIO_CH3, 0xfe0),
 };
@@ -290,9 +296,14 @@ static struct intc_sense_reg irq_sense_registers[] __initdata = {
 					    IRQ4, IRQ5, IRQ6, IRQ7 } },
 };
 
-static DECLARE_INTC_DESC(intc_irq_desc, "sh7763-irq", irq_vectors,
-			NULL, irq_mask_registers, irq_prio_registers,
-			irq_sense_registers);
+static struct intc_mask_reg irq_ack_registers[] __initdata = {
+	{ 0xffd00024, 0, 32, /* INTREQ */
+	  { IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7 } },
+};
+
+static DECLARE_INTC_DESC_ACK(intc_irq_desc, "sh7763-irq", irq_vectors,
+			     NULL, irq_mask_registers, irq_prio_registers,
+			     irq_sense_registers, irq_ack_registers);
 
 
 /* External interrupt pins in IRL mode */
diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7780.c b/arch/sh/kernel/cpu/sh4a/setup-sh7780.c
index 18dbbe23fea1..fb8200cc7440 100644
--- a/arch/sh/kernel/cpu/sh4a/setup-sh7780.c
+++ b/arch/sh/kernel/cpu/sh4a/setup-sh7780.c
@@ -217,9 +217,14 @@ static struct intc_sense_reg irq_sense_registers[] __initdata = {
 					    IRQ4, IRQ5, IRQ6, IRQ7 } },
 };
 
-static DECLARE_INTC_DESC(intc_irq_desc, "sh7780-irq", irq_vectors,
-			 NULL, irq_mask_registers, irq_prio_registers,
-			 irq_sense_registers);
+static struct intc_mask_reg irq_ack_registers[] __initdata = {
+	{ 0xffd00024, 0, 32, /* INTREQ */
+	  { IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7 } },
+};
+
+static DECLARE_INTC_DESC_ACK(intc_irq_desc, "sh7780-irq", irq_vectors,
+			     NULL, irq_mask_registers, irq_prio_registers,
+			     irq_sense_registers, irq_ack_registers);
 
 /* External interrupt pins in IRL mode */
 
diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7785.c b/arch/sh/kernel/cpu/sh4a/setup-sh7785.c
index 621e7329ec63..30baa63b24c8 100644
--- a/arch/sh/kernel/cpu/sh4a/setup-sh7785.c
+++ b/arch/sh/kernel/cpu/sh4a/setup-sh7785.c
@@ -238,13 +238,18 @@ static struct intc_sense_reg sense_registers[] __initdata = {
 					    IRQ4, IRQ5, IRQ6, IRQ7 } },
 };
 
-static DECLARE_INTC_DESC(intc_desc_irq0123, "sh7785-irq0123", vectors_irq0123,
-			 NULL, mask_registers, prio_registers,
-			 sense_registers);
+static struct intc_mask_reg ack_registers[] __initdata = {
+	{ 0xffd00024, 0, 32, /* INTREQ */
+	  { IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7 } },
+};
+
+static DECLARE_INTC_DESC_ACK(intc_desc_irq0123, "sh7785-irq0123",
+			     vectors_irq0123, NULL, mask_registers,
+			     prio_registers, sense_registers, ack_registers);
 
-static DECLARE_INTC_DESC(intc_desc_irq4567, "sh7785-irq4567", vectors_irq4567,
-			 NULL, mask_registers, prio_registers,
-			 sense_registers);
+static DECLARE_INTC_DESC_ACK(intc_desc_irq4567, "sh7785-irq4567",
+			     vectors_irq4567, NULL, mask_registers,
+			     prio_registers, sense_registers, ack_registers);
 
 /* External interrupt pins in IRL mode */
 
diff --git a/arch/sh/kernel/cpu/sh5/entry.S b/arch/sh/kernel/cpu/sh5/entry.S
index 05372ed6c568..04c7da968146 100644
--- a/arch/sh/kernel/cpu/sh5/entry.S
+++ b/arch/sh/kernel/cpu/sh5/entry.S
@@ -11,7 +11,7 @@
  */
 #include <linux/errno.h>
 #include <linux/sys.h>
-#include <asm/cpu/registers.h>
+#include <cpu/registers.h>
 #include <asm/processor.h>
 #include <asm/unistd.h>
 #include <asm/thread_info.h>
@@ -987,11 +987,11 @@ work_resched:
 work_notifysig:
 	gettr	tr1, LINK
 
-	movi	do_signal, r6
+	movi	do_notify_resume, r6
 	ptabs	r6, tr0
 	or	SP, ZERO, r2
-	or	ZERO, ZERO, r3
-	blink	tr0, LINK	    /* Call do_signal(regs, 0), return here */
+	or	r7, ZERO, r3
+	blink	tr0, LINK	    /* Call do_notify_resume(regs, current_thread_info->flags), return here */
 
 restore_all:
 	/* Do prefetches */
@@ -1300,18 +1300,20 @@ syscall_allowed:
 
 	getcon	KCR0, r2
 	ld.l	r2, TI_FLAGS, r4
-	movi	(_TIF_SYSCALL_TRACE | _TIF_SINGLESTEP | _TIF_SYSCALL_AUDIT), r6
+	movi	_TIF_WORK_SYSCALL_MASK, r6
 	and	r6, r4, r6
 	beq/l	r6, ZERO, tr0
 
 	/* Trace it by calling syscall_trace before and after */
-	movi	syscall_trace, r4
+	movi	do_syscall_trace_enter, r4
 	or	SP, ZERO, r2
-	or	ZERO, ZERO, r3
 	ptabs	r4, tr0
 	blink	tr0, LINK
 
-	/* Reload syscall number as r5 is trashed by syscall_trace */
+	/* Save the retval */
+	st.q	SP, FRAME_R(2), r2
+
+	/* Reload syscall number as r5 is trashed by do_syscall_trace_enter */
 	ld.q	SP, FRAME_S(FSYSCALL_ID), r5
 	andi	r5, 0x1ff, r5
 
@@ -1343,9 +1345,8 @@ syscall_ret_trace:
 	/* We get back here only if under trace */
 	st.q	SP, FRAME_R(9), r2	/* Save return value */
 
-	movi	syscall_trace, LINK
+	movi	do_syscall_trace_leave, LINK
 	or	SP, ZERO, r2
-	movi	1, r3
 	ptabs	LINK, tr0
 	blink	tr0, LINK
 
diff --git a/arch/sh/kernel/entry-common.S b/arch/sh/kernel/entry-common.S
index 718bd2356b34..0bc17def55a7 100644
--- a/arch/sh/kernel/entry-common.S
+++ b/arch/sh/kernel/entry-common.S
@@ -192,7 +192,7 @@ work_resched:
 	.align	2
 1:	.long	schedule
 2:	.long	do_notify_resume
-3:	.long	restore_all
+3:	.long	resume_userspace
 #ifdef CONFIG_TRACE_IRQFLAGS
 4:	.long	trace_hardirqs_on
 5:	.long	trace_hardirqs_off
@@ -202,7 +202,7 @@ work_resched:
 syscall_exit_work:
 	! r0: current_thread_info->flags
 	! r8: current_thread_info
-	tst	#_TIF_SYSCALL_TRACE | _TIF_SINGLESTEP | _TIF_SYSCALL_AUDIT, r0
+	tst	#_TIF_WORK_SYSCALL_MASK, r0
 	bt/s	work_pending
 	 tst	#_TIF_NEED_RESCHED, r0
 #ifdef CONFIG_TRACE_IRQFLAGS
@@ -211,10 +211,8 @@ syscall_exit_work:
 	 nop
 #endif
 	sti
-	! XXX setup arguments...
 	mov	r15, r4
-	mov	#1, r5
-	mov.l	4f, r0			! do_syscall_trace
+	mov.l	8f, r0			! do_syscall_trace_leave
 	jsr	@r0
 	 nop
 	bra	resume_userspace
@@ -223,12 +221,11 @@ syscall_exit_work:
 	.align	2
 syscall_trace_entry:
 	!                     	Yes it is traced.
-	! XXX setup arguments...
 	mov     r15, r4
-	mov     #0, r5
-	mov.l	4f, r11		! Call do_syscall_trace which notifies
+	mov.l	7f, r11		! Call do_syscall_trace_enter which notifies
 	jsr	@r11	    	! superior (will chomp R[0-7])
 	 nop
+	mov.l	r0, @(OFF_R0,r15)	! Save return value
 	!			Reload R0-R4 from kernel stack, where the
 	!   	    	    	parent may have modified them using
 	!   	    	    	ptrace(POKEUSR).  (Note that R0-R2 are
@@ -351,7 +348,7 @@ ENTRY(system_call)
 	!
 	get_current_thread_info r8, r10
 	mov.l	@(TI_FLAGS,r8), r8
-	mov	#(_TIF_SYSCALL_TRACE | _TIF_SYSCALL_AUDIT), r10
+	mov	#_TIF_WORK_SYSCALL_MASK, r10
 	tst	r10, r8
 	bf	syscall_trace_entry
 	!
@@ -389,8 +386,9 @@ syscall_exit:
 #endif
 2:	.long	NR_syscalls
 3:	.long	sys_call_table
-4:	.long	do_syscall_trace
 #ifdef CONFIG_TRACE_IRQFLAGS
 5:	.long	trace_hardirqs_on
 6:	.long	trace_hardirqs_off
 #endif
+7:	.long	do_syscall_trace_enter
+8:	.long	do_syscall_trace_leave
diff --git a/arch/sh/kernel/head_64.S b/arch/sh/kernel/head_64.S
index f42d4c0feb76..7ccfb995a398 100644
--- a/arch/sh/kernel/head_64.S
+++ b/arch/sh/kernel/head_64.S
@@ -11,8 +11,8 @@
 #include <asm/page.h>
 #include <asm/cache.h>
 #include <asm/tlb.h>
-#include <asm/cpu/registers.h>
-#include <asm/cpu/mmu_context.h>
+#include <cpu/registers.h>
+#include <cpu/mmu_context.h>
 #include <asm/thread_info.h>
 
 /*
diff --git a/arch/sh/kernel/irq.c b/arch/sh/kernel/irq.c
index a2a99e487e33..64b7690c664c 100644
--- a/arch/sh/kernel/irq.c
+++ b/arch/sh/kernel/irq.c
@@ -15,7 +15,7 @@
 #include <asm/machvec.h>
 #include <asm/uaccess.h>
 #include <asm/thread_info.h>
-#include <asm/cpu/mmu_context.h>
+#include <cpu/mmu_context.h>
 
 atomic_t irq_err_count;
 
diff --git a/arch/sh/kernel/machine_kexec.c b/arch/sh/kernel/machine_kexec.c
index 5c17de51987e..4703dff174d5 100644
--- a/arch/sh/kernel/machine_kexec.c
+++ b/arch/sh/kernel/machine_kexec.c
@@ -13,6 +13,7 @@
 #include <linux/kexec.h>
 #include <linux/delay.h>
 #include <linux/reboot.h>
+#include <linux/numa.h>
 #include <asm/pgtable.h>
 #include <asm/pgalloc.h>
 #include <asm/mmu_context.h>
@@ -70,7 +71,7 @@ static void kexec_info(struct kimage *image)
  * Do not allocate memory (or fail in any way) in machine_kexec().
  * We are past the point of no return, committed to rebooting now.
  */
-NORET_TYPE void machine_kexec(struct kimage *image)
+void machine_kexec(struct kimage *image)
 {
 
 	unsigned long page_list;
@@ -104,3 +105,10 @@ NORET_TYPE void machine_kexec(struct kimage *image)
 	(*rnk)(page_list, reboot_code_buffer, image->start, vbr_reg);
 }
 
+void arch_crash_save_vmcoreinfo(void)
+{
+#ifdef CONFIG_NUMA
+	VMCOREINFO_SYMBOL(node_data);
+	VMCOREINFO_LENGTH(node_data, MAX_NUMNODES);
+#endif
+}
diff --git a/arch/sh/kernel/module.c b/arch/sh/kernel/module.c
index 5482e65375a9..c43081039dd5 100644
--- a/arch/sh/kernel/module.c
+++ b/arch/sh/kernel/module.c
@@ -27,6 +27,7 @@
 #include <linux/moduleloader.h>
 #include <linux/elf.h>
 #include <linux/vmalloc.h>
+#include <linux/bug.h>
 #include <linux/fs.h>
 #include <linux/string.h>
 #include <linux/kernel.h>
@@ -36,7 +37,8 @@ void *module_alloc(unsigned long size)
 {
 	if (size == 0)
 		return NULL;
-	return vmalloc(size);
+
+	return vmalloc_exec(size);
 }
 
 
@@ -145,9 +147,10 @@ int module_finalize(const Elf_Ehdr *hdr,
 		    const Elf_Shdr *sechdrs,
 		    struct module *me)
 {
-	return 0;
+	return module_bug_finalize(hdr, sechdrs, me);
 }
 
 void module_arch_cleanup(struct module *mod)
 {
+	module_bug_cleanup(mod);
 }
diff --git a/arch/sh/kernel/process_32.c b/arch/sh/kernel/process_32.c
index 921892c351da..3326a45749d9 100644
--- a/arch/sh/kernel/process_32.c
+++ b/arch/sh/kernel/process_32.c
@@ -34,18 +34,6 @@ void (*pm_idle)(void);
 void (*pm_power_off)(void);
 EXPORT_SYMBOL(pm_power_off);
 
-void disable_hlt(void)
-{
-	hlt_counter++;
-}
-EXPORT_SYMBOL(disable_hlt);
-
-void enable_hlt(void)
-{
-	hlt_counter--;
-}
-EXPORT_SYMBOL(enable_hlt);
-
 static int __init nohlt_setup(char *__unused)
 {
 	hlt_counter = 1;
@@ -60,7 +48,7 @@ static int __init hlt_setup(char *__unused)
 }
 __setup("hlt", hlt_setup);
 
-void default_idle(void)
+static void default_idle(void)
 {
 	if (!hlt_counter) {
 		clear_thread_flag(TIF_POLLING_NRFLAG);
diff --git a/arch/sh/kernel/process_64.c b/arch/sh/kernel/process_64.c
index 0283d8133075..b9dbd2d3b4a5 100644
--- a/arch/sh/kernel/process_64.c
+++ b/arch/sh/kernel/process_64.c
@@ -36,16 +36,6 @@ static int hlt_counter = 1;
 
 #define HARD_IDLE_TIMEOUT (HZ / 3)
 
-void disable_hlt(void)
-{
-	hlt_counter++;
-}
-
-void enable_hlt(void)
-{
-	hlt_counter--;
-}
-
 static int __init nohlt_setup(char *__unused)
 {
 	hlt_counter = 1;
diff --git a/arch/sh/kernel/ptrace_32.c b/arch/sh/kernel/ptrace_32.c
index fddb547f3c2b..035cb300d3dc 100644
--- a/arch/sh/kernel/ptrace_32.c
+++ b/arch/sh/kernel/ptrace_32.c
@@ -20,6 +20,8 @@
 #include <linux/signal.h>
 #include <linux/io.h>
 #include <linux/audit.h>
+#include <linux/seccomp.h>
+#include <linux/tracehook.h>
 #include <asm/uaccess.h>
 #include <asm/pgtable.h>
 #include <asm/system.h>
@@ -57,7 +59,23 @@ static inline int put_stack_long(struct task_struct *task, int offset,
 	return 0;
 }
 
-static void ptrace_disable_singlestep(struct task_struct *child)
+void user_enable_single_step(struct task_struct *child)
+{
+	struct pt_regs *regs = task_pt_regs(child);
+	long pc;
+
+	pc = get_stack_long(child, (long)&regs->pc);
+
+	/* Next scheduling will set up UBC */
+	if (child->thread.ubc_pc == 0)
+		ubc_usercnt += 1;
+
+	child->thread.ubc_pc = pc;
+
+	set_tsk_thread_flag(child, TIF_SINGLESTEP);
+}
+
+void user_disable_single_step(struct task_struct *child)
 {
 	clear_tsk_thread_flag(child, TIF_SINGLESTEP);
 
@@ -81,7 +99,7 @@ static void ptrace_disable_singlestep(struct task_struct *child)
  */
 void ptrace_disable(struct task_struct *child)
 {
-	ptrace_disable_singlestep(child);
+	user_disable_single_step(child);
 }
 
 long arch_ptrace(struct task_struct *child, long request, long addr, long data)
@@ -90,12 +108,6 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data)
 	int ret;
 
 	switch (request) {
-	/* when I and D space are separate, these will need to be fixed. */
-	case PTRACE_PEEKTEXT: /* read word at location addr. */
-	case PTRACE_PEEKDATA:
-		ret = generic_ptrace_peekdata(child, addr, data);
-		break;
-
 	/* read the word at location addr in the USER area. */
 	case PTRACE_PEEKUSR: {
 		unsigned long tmp;
@@ -125,12 +137,6 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data)
 		break;
 	}
 
-	/* when I and D space are separate, this will have to be fixed. */
-	case PTRACE_POKETEXT: /* write the word at location addr. */
-	case PTRACE_POKEDATA:
-		ret = generic_ptrace_pokedata(child, addr, data);
-		break;
-
 	case PTRACE_POKEUSR: /* write the word at location addr in the USER area */
 		ret = -EIO;
 		if ((addr & 3) || addr < 0 ||
@@ -151,67 +157,6 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data)
 		}
 		break;
 
-	case PTRACE_SYSCALL: /* continue and stop at next (return from) syscall */
-	case PTRACE_CONT: { /* restart after signal. */
-		ret = -EIO;
-		if (!valid_signal(data))
-			break;
-		if (request == PTRACE_SYSCALL)
-			set_tsk_thread_flag(child, TIF_SYSCALL_TRACE);
-		else
-			clear_tsk_thread_flag(child, TIF_SYSCALL_TRACE);
-
-		ptrace_disable_singlestep(child);
-
-		child->exit_code = data;
-		wake_up_process(child);
-		ret = 0;
-		break;
-	}
-
-/*
- * make the child exit.  Best I can do is send it a sigkill.
- * perhaps it should be put in the status that it wants to
- * exit.
- */
-	case PTRACE_KILL: {
-		ret = 0;
-		if (child->exit_state == EXIT_ZOMBIE)	/* already dead */
-			break;
-		ptrace_disable_singlestep(child);
-		child->exit_code = SIGKILL;
-		wake_up_process(child);
-		break;
-	}
-
-	case PTRACE_SINGLESTEP: {  /* set the trap flag. */
-		long pc;
-		struct pt_regs *regs = NULL;
-
-		ret = -EIO;
-		if (!valid_signal(data))
-			break;
-		clear_tsk_thread_flag(child, TIF_SYSCALL_TRACE);
-		if ((child->ptrace & PT_DTRACE) == 0) {
-			/* Spurious delayed TF traps may occur */
-			child->ptrace |= PT_DTRACE;
-		}
-
-		pc = get_stack_long(child, (long)&regs->pc);
-
-		/* Next scheduling will set up UBC */
-		if (child->thread.ubc_pc == 0)
-			ubc_usercnt += 1;
-		child->thread.ubc_pc = pc;
-
-		set_tsk_thread_flag(child, TIF_SINGLESTEP);
-		child->exit_code = data;
-		/* give it a chance to run. */
-		wake_up_process(child);
-		ret = 0;
-		break;
-	}
-
 #ifdef CONFIG_SH_DSP
 	case PTRACE_GETDSPREGS: {
 		unsigned long dp;
@@ -241,6 +186,29 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data)
 		break;
 	}
 #endif
+#ifdef CONFIG_BINFMT_ELF_FDPIC
+	case PTRACE_GETFDPIC: {
+		unsigned long tmp = 0;
+
+		switch (addr) {
+		case PTRACE_GETFDPIC_EXEC:
+			tmp = child->mm->context.exec_fdpic_loadmap;
+			break;
+		case PTRACE_GETFDPIC_INTERP:
+			tmp = child->mm->context.interp_fdpic_loadmap;
+			break;
+		default:
+			break;
+		}
+
+		ret = 0;
+		if (put_user(tmp, (unsigned long *) data)) {
+			ret = -EFAULT;
+			break;
+		}
+		break;
+	}
+#endif
 	default:
 		ret = ptrace_request(child, request, addr, data);
 		break;
@@ -249,39 +217,49 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data)
 	return ret;
 }
 
-asmlinkage void do_syscall_trace(struct pt_regs *regs, int entryexit)
+static inline int audit_arch(void)
 {
-	struct task_struct *tsk = current;
+	int arch = EM_SH;
 
-	if (unlikely(current->audit_context) && entryexit)
-		audit_syscall_exit(AUDITSC_RESULT(regs->regs[0]),
-				   regs->regs[0]);
+#ifdef CONFIG_CPU_LITTLE_ENDIAN
+	arch |= __AUDIT_ARCH_LE;
+#endif
 
-	if (!test_thread_flag(TIF_SYSCALL_TRACE) &&
-	    !test_thread_flag(TIF_SINGLESTEP))
-		goto out;
-	if (!(tsk->ptrace & PT_PTRACED))
-		goto out;
+	return arch;
+}
 
-	/* the 0x80 provides a way for the tracing parent to distinguish
-	   between a syscall stop and SIGTRAP delivery */
-	ptrace_notify(SIGTRAP | ((current->ptrace & PT_TRACESYSGOOD) &&
-				 !test_thread_flag(TIF_SINGLESTEP) ? 0x80 : 0));
+asmlinkage long do_syscall_trace_enter(struct pt_regs *regs)
+{
+	long ret = 0;
 
-	/*
-	 * this isn't the same as continuing with a signal, but it will do
-	 * for normal use.  strace only continues with a signal if the
-	 * stopping signal is not SIGTRAP.  -brl
-	 */
-	if (tsk->exit_code) {
-		send_sig(tsk->exit_code, tsk, 1);
-		tsk->exit_code = 0;
-	}
+	secure_computing(regs->regs[0]);
 
-out:
-	if (unlikely(current->audit_context) && !entryexit)
-		audit_syscall_entry(AUDIT_ARCH_SH, regs->regs[3],
+	if (test_thread_flag(TIF_SYSCALL_TRACE) &&
+	    tracehook_report_syscall_entry(regs))
+		/*
+		 * Tracing decided this syscall should not happen.
+		 * We'll return a bogus call number to get an ENOSYS
+		 * error, but leave the original number in regs->regs[0].
+		 */
+		ret = -1L;
+
+	if (unlikely(current->audit_context))
+		audit_syscall_entry(audit_arch(), regs->regs[3],
 				    regs->regs[4], regs->regs[5],
 				    regs->regs[6], regs->regs[7]);
 
+	return ret ?: regs->regs[0];
+}
+
+asmlinkage void do_syscall_trace_leave(struct pt_regs *regs)
+{
+	int step;
+
+	if (unlikely(current->audit_context))
+		audit_syscall_exit(AUDITSC_RESULT(regs->regs[0]),
+				   regs->regs[0]);
+
+	step = test_thread_flag(TIF_SINGLESTEP);
+	if (step || test_thread_flag(TIF_SYSCALL_TRACE))
+		tracehook_report_syscall_exit(regs, step);
 }
diff --git a/arch/sh/kernel/ptrace_64.c b/arch/sh/kernel/ptrace_64.c
index d453c47dc522..5922edd416db 100644
--- a/arch/sh/kernel/ptrace_64.c
+++ b/arch/sh/kernel/ptrace_64.c
@@ -27,6 +27,8 @@
 #include <linux/signal.h>
 #include <linux/syscalls.h>
 #include <linux/audit.h>
+#include <linux/seccomp.h>
+#include <linux/tracehook.h>
 #include <asm/io.h>
 #include <asm/uaccess.h>
 #include <asm/pgtable.h>
@@ -120,18 +122,23 @@ put_fpu_long(struct task_struct *task, unsigned long addr, unsigned long data)
 	return 0;
 }
 
+void user_enable_single_step(struct task_struct *child)
+{
+	struct pt_regs *regs = child->thread.uregs;
+
+	regs->sr |= SR_SSTEP;	/* auto-resetting upon exception */
+}
+
+void user_disable_single_step(struct task_struct *child)
+{
+	regs->sr &= ~SR_SSTEP;
+}
 
 long arch_ptrace(struct task_struct *child, long request, long addr, long data)
 {
 	int ret;
 
 	switch (request) {
-	/* when I and D space are separate, these will need to be fixed. */
-	case PTRACE_PEEKTEXT: /* read word at location addr. */
-	case PTRACE_PEEKDATA:
-		ret = generic_ptrace_peekdata(child, addr, data);
-		break;
-
 	/* read the word at location addr in the USER area. */
 	case PTRACE_PEEKUSR: {
 		unsigned long tmp;
@@ -154,12 +161,6 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data)
 		break;
 	}
 
-	/* when I and D space are separate, this will have to be fixed. */
-	case PTRACE_POKETEXT: /* write the word at location addr. */
-	case PTRACE_POKEDATA:
-		ret = generic_ptrace_pokedata(child, addr, data);
-		break;
-
 	case PTRACE_POKEUSR:
                 /* write the word at location addr in the USER area. We must
                    disallow any changes to certain SR bits or u_fpvalid, since
@@ -191,58 +192,6 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data)
 		}
 		break;
 
-	case PTRACE_SYSCALL: /* continue and stop at next (return from) syscall */
-	case PTRACE_CONT: { /* restart after signal. */
-		ret = -EIO;
-		if (!valid_signal(data))
-			break;
-		if (request == PTRACE_SYSCALL)
-			set_tsk_thread_flag(child, TIF_SYSCALL_TRACE);
-		else
-			clear_tsk_thread_flag(child, TIF_SYSCALL_TRACE);
-		child->exit_code = data;
-		wake_up_process(child);
-		ret = 0;
-		break;
-	}
-
-/*
- * make the child exit.  Best I can do is send it a sigkill.
- * perhaps it should be put in the status that it wants to
- * exit.
- */
-	case PTRACE_KILL: {
-		ret = 0;
-		if (child->exit_state == EXIT_ZOMBIE)	/* already dead */
-			break;
-		child->exit_code = SIGKILL;
-		wake_up_process(child);
-		break;
-	}
-
-	case PTRACE_SINGLESTEP: {  /* set the trap flag. */
-		struct pt_regs *regs;
-
-		ret = -EIO;
-		if (!valid_signal(data))
-			break;
-		clear_tsk_thread_flag(child, TIF_SYSCALL_TRACE);
-		if ((child->ptrace & PT_DTRACE) == 0) {
-			/* Spurious delayed TF traps may occur */
-			child->ptrace |= PT_DTRACE;
-		}
-
-		regs = child->thread.uregs;
-
-		regs->sr |= SR_SSTEP;	/* auto-resetting upon exception */
-
-		child->exit_code = data;
-		/* give it a chance to run. */
-		wake_up_process(child);
-		ret = 0;
-		break;
-	}
-
 	default:
 		ret = ptrace_request(child, request, addr, data);
 		break;
@@ -273,38 +222,51 @@ asmlinkage int sh64_ptrace(long request, long pid, long addr, long data)
 	return sys_ptrace(request, pid, addr, data);
 }
 
-asmlinkage void syscall_trace(struct pt_regs *regs, int entryexit)
+static inline int audit_arch(void)
 {
-	struct task_struct *tsk = current;
+	int arch = EM_SH;
 
-	if (unlikely(current->audit_context) && entryexit)
-		audit_syscall_exit(AUDITSC_RESULT(regs->regs[9]),
-				   regs->regs[9]);
+#ifdef CONFIG_64BIT
+	arch |= __AUDIT_ARCH_64BIT;
+#endif
+#ifdef CONFIG_CPU_LITTLE_ENDIAN
+	arch |= __AUDIT_ARCH_LE;
+#endif
 
-	if (!test_thread_flag(TIF_SYSCALL_TRACE) &&
-	    !test_thread_flag(TIF_SINGLESTEP))
-		goto out;
-	if (!(tsk->ptrace & PT_PTRACED))
-		goto out;
-
-	ptrace_notify(SIGTRAP | ((current->ptrace & PT_TRACESYSGOOD) &&
-				!test_thread_flag(TIF_SINGLESTEP) ? 0x80 : 0));
-
-	/*
-	 * this isn't the same as continuing with a signal, but it will do
-	 * for normal use.  strace only continues with a signal if the
-	 * stopping signal is not SIGTRAP.  -brl
-	 */
-	if (tsk->exit_code) {
-		send_sig(tsk->exit_code, tsk, 1);
-		tsk->exit_code = 0;
-	}
+	return arch;
+}
 
-out:
-	if (unlikely(current->audit_context) && !entryexit)
-		audit_syscall_entry(AUDIT_ARCH_SH, regs->regs[1],
+asmlinkage long long do_syscall_trace_enter(struct pt_regs *regs)
+{
+	long long ret = 0;
+
+	secure_computing(regs->regs[9]);
+
+	if (test_thread_flag(TIF_SYSCALL_TRACE) &&
+	    tracehook_report_syscall_entry(regs))
+		/*
+		 * Tracing decided this syscall should not happen.
+		 * We'll return a bogus call number to get an ENOSYS
+		 * error, but leave the original number in regs->regs[0].
+		 */
+		ret = -1LL;
+
+	if (unlikely(current->audit_context))
+		audit_syscall_entry(audit_arch(), regs->regs[1],
 				    regs->regs[2], regs->regs[3],
 				    regs->regs[4], regs->regs[5]);
+
+	return ret ?: regs->regs[9];
+}
+
+asmlinkage void do_syscall_trace_leave(struct pt_regs *regs)
+{
+	if (unlikely(current->audit_context))
+		audit_syscall_exit(AUDITSC_RESULT(regs->regs[9]),
+				   regs->regs[9]);
+
+	if (test_thread_flag(TIF_SYSCALL_TRACE))
+		tracehook_report_syscall_exit(regs, 0);
 }
 
 /* Called with interrupts disabled */
@@ -338,5 +300,5 @@ asmlinkage void do_software_break_point(unsigned long long vec,
  */
 void ptrace_disable(struct task_struct *child)
 {
-        /* nothing to do.. */
+	user_disable_single_step(child);
 }
diff --git a/arch/sh/kernel/setup.c b/arch/sh/kernel/setup.c
index bca2bbc575db..a35207655e7b 100644
--- a/arch/sh/kernel/setup.c
+++ b/arch/sh/kernel/setup.c
@@ -25,6 +25,7 @@
 #include <linux/smp.h>
 #include <linux/err.h>
 #include <linux/debugfs.h>
+#include <linux/crash_dump.h>
 #include <asm/uaccess.h>
 #include <asm/io.h>
 #include <asm/page.h>
@@ -286,6 +287,25 @@ static void __init setup_memory(void)
 extern void __init setup_memory(void);
 #endif
 
+/*
+ * Note: elfcorehdr_addr is not just limited to vmcore. It is also used by
+ * is_kdump_kernel() to determine if we are booting after a panic. Hence
+ * ifdef it under CONFIG_CRASH_DUMP and not CONFIG_PROC_VMCORE.
+ */
+#ifdef CONFIG_CRASH_DUMP
+/* elfcorehdr= specifies the location of elf core header
+ * stored by the crashed kernel.
+ */
+static int __init parse_elfcorehdr(char *arg)
+{
+	if (!arg)
+		return -EINVAL;
+	elfcorehdr_addr = memparse(arg, &arg);
+	return 0;
+}
+early_param("elfcorehdr", parse_elfcorehdr);
+#endif
+
 void __init setup_arch(char **cmdline_p)
 {
 	enable_mmu();
@@ -398,6 +418,7 @@ const char *get_cpu_subtype(struct sh_cpuinfo *c)
 {
 	return cpu_name[c->type];
 }
+EXPORT_SYMBOL(get_cpu_subtype);
 
 #ifdef CONFIG_PROC_FS
 /* Symbolic CPU flags, keep in sync with asm/cpu-features.h */
@@ -452,6 +473,12 @@ static int show_cpuinfo(struct seq_file *m, void *v)
 	seq_printf(m, "processor\t: %d\n", cpu);
 	seq_printf(m, "cpu family\t: %s\n", init_utsname()->machine);
 	seq_printf(m, "cpu type\t: %s\n", get_cpu_subtype(c));
+	if (c->cut_major == -1)
+		seq_printf(m, "cut\t\t: unknown\n");
+	else if (c->cut_minor == -1)
+		seq_printf(m, "cut\t\t: %d.x\n", c->cut_major);
+	else
+		seq_printf(m, "cut\t\t: %d.%d\n", c->cut_major, c->cut_minor);
 
 	show_cpuflags(m, c);
 
diff --git a/arch/sh/kernel/sh_ksyms_32.c b/arch/sh/kernel/sh_ksyms_32.c
index 8f916536719c..6e1b1c271658 100644
--- a/arch/sh/kernel/sh_ksyms_32.c
+++ b/arch/sh/kernel/sh_ksyms_32.c
@@ -107,10 +107,12 @@ DECLARE_EXPORT(__movmemSI12_i4);
  * GCC >= 4.2 emits these for division, as do GCC 4.1.x versions of the ST
  * compiler which include backported patches.
  */
-DECLARE_EXPORT(__sdivsi3_i4i);
 DECLARE_EXPORT(__udiv_qrnnd_16);
+#if !defined(CONFIG_CPU_SH2)
+DECLARE_EXPORT(__sdivsi3_i4i);
 DECLARE_EXPORT(__udivsi3_i4i);
 #endif
+#endif
 #else /* GCC 3.x */
 DECLARE_EXPORT(__movstr_i4_even);
 DECLARE_EXPORT(__movstr_i4_odd);
diff --git a/arch/sh/kernel/signal_32.c b/arch/sh/kernel/signal_32.c
index f311551d9a05..51689d29ad45 100644
--- a/arch/sh/kernel/signal_32.c
+++ b/arch/sh/kernel/signal_32.c
@@ -24,6 +24,7 @@
 #include <linux/binfmts.h>
 #include <linux/freezer.h>
 #include <linux/io.h>
+#include <linux/tracehook.h>
 #include <asm/system.h>
 #include <asm/ucontext.h>
 #include <asm/uaccess.h>
@@ -33,6 +34,11 @@
 
 #define _BLOCKABLE (~(sigmask(SIGKILL) | sigmask(SIGSTOP)))
 
+struct fdpic_func_descriptor {
+	unsigned long	text;
+	unsigned long	GOT;
+};
+
 /*
  * Atomically swap in the new signal mask, and wait for a signal.
  */
@@ -368,6 +374,7 @@ static int setup_frame(int sig, struct k_sigaction *ka,
 		err |= __put_user(OR_R0_R0, &frame->retcode[6]);
 		err |= __put_user((__NR_sigreturn), &frame->retcode[7]);
 		regs->pr = (unsigned long) frame->retcode;
+		flush_icache_range(regs->pr, regs->pr + sizeof(frame->retcode));
 	}
 
 	if (err)
@@ -378,18 +385,21 @@ static int setup_frame(int sig, struct k_sigaction *ka,
 	regs->regs[4] = signal; /* Arg for signal handler */
 	regs->regs[5] = 0;
 	regs->regs[6] = (unsigned long) &frame->sc;
-	regs->pc = (unsigned long) ka->sa.sa_handler;
+
+	if (current->personality & FDPIC_FUNCPTRS) {
+		struct fdpic_func_descriptor __user *funcptr =
+			(struct fdpic_func_descriptor __user *)ka->sa.sa_handler;
+
+		__get_user(regs->pc, &funcptr->text);
+		__get_user(regs->regs[12], &funcptr->GOT);
+	} else
+		regs->pc = (unsigned long)ka->sa.sa_handler;
 
 	set_fs(USER_DS);
 
 	pr_debug("SIG deliver (%s:%d): sp=%p pc=%08lx pr=%08lx\n",
 		 current->comm, task_pid_nr(current), frame, regs->pc, regs->pr);
 
-	flush_cache_sigtramp(regs->pr);
-
-	if ((-regs->pr & (L1_CACHE_BYTES-1)) < sizeof(frame->retcode))
-		flush_cache_sigtramp(regs->pr + L1_CACHE_BYTES);
-
 	return 0;
 
 give_sigsegv:
@@ -458,17 +468,22 @@ static int setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t *info,
 	regs->regs[4] = signal; /* Arg for signal handler */
 	regs->regs[5] = (unsigned long) &frame->info;
 	regs->regs[6] = (unsigned long) &frame->uc;
-	regs->pc = (unsigned long) ka->sa.sa_handler;
+
+	if (current->personality & FDPIC_FUNCPTRS) {
+		struct fdpic_func_descriptor __user *funcptr =
+			(struct fdpic_func_descriptor __user *)ka->sa.sa_handler;
+
+		__get_user(regs->pc, &funcptr->text);
+		__get_user(regs->regs[12], &funcptr->GOT);
+	} else
+		regs->pc = (unsigned long)ka->sa.sa_handler;
 
 	set_fs(USER_DS);
 
 	pr_debug("SIG deliver (%s:%d): sp=%p pc=%08lx pr=%08lx\n",
 		 current->comm, task_pid_nr(current), frame, regs->pc, regs->pr);
 
-	flush_cache_sigtramp(regs->pr);
-
-	if ((-regs->pr & (L1_CACHE_BYTES-1)) < sizeof(frame->retcode))
-		flush_cache_sigtramp(regs->pr + L1_CACHE_BYTES);
+	flush_icache_range(regs->pr, regs->pr + sizeof(frame->retcode));
 
 	return 0;
 
@@ -493,14 +508,13 @@ handle_signal(unsigned long sig, struct k_sigaction *ka, siginfo_t *info,
 		switch (regs->regs[0]) {
 			case -ERESTART_RESTARTBLOCK:
 			case -ERESTARTNOHAND:
+			no_system_call_restart:
 				regs->regs[0] = -EINTR;
 				break;
 
 			case -ERESTARTSYS:
-				if (!(ka->sa.sa_flags & SA_RESTART)) {
-					regs->regs[0] = -EINTR;
-					break;
-				}
+				if (!(ka->sa.sa_flags & SA_RESTART))
+					goto no_system_call_restart;
 			/* fallthrough */
 			case -ERESTARTNOINTR:
 				regs->regs[0] = save_r0;
@@ -575,12 +589,15 @@ static void do_signal(struct pt_regs *regs, unsigned int save_r0)
 			 * clear the TIF_RESTORE_SIGMASK flag */
 			if (test_thread_flag(TIF_RESTORE_SIGMASK))
 				clear_thread_flag(TIF_RESTORE_SIGMASK);
+
+			tracehook_signal_handler(signr, &info, &ka, regs,
+					test_thread_flag(TIF_SINGLESTEP));
 		}
 
 		return;
 	}
 
- no_signal:
+no_signal:
 	/* Did we come from a system call? */
 	if (regs->tra >= 0) {
 		/* Restart the system call - no handlers present */
@@ -604,9 +621,14 @@ static void do_signal(struct pt_regs *regs, unsigned int save_r0)
 }
 
 asmlinkage void do_notify_resume(struct pt_regs *regs, unsigned int save_r0,
-				 __u32 thread_info_flags)
+				 unsigned long thread_info_flags)
 {
 	/* deal with pending signal delivery */
-	if (thread_info_flags & (_TIF_SIGPENDING | _TIF_RESTORE_SIGMASK))
+	if (thread_info_flags & _TIF_SIGPENDING)
 		do_signal(regs, save_r0);
+
+	if (thread_info_flags & _TIF_NOTIFY_RESUME) {
+		clear_thread_flag(TIF_NOTIFY_RESUME);
+		tracehook_notify_resume(regs);
+	}
 }
diff --git a/arch/sh/kernel/signal_64.c b/arch/sh/kernel/signal_64.c
index 552eb810cd85..1d62dfef77f1 100644
--- a/arch/sh/kernel/signal_64.c
+++ b/arch/sh/kernel/signal_64.c
@@ -22,6 +22,7 @@
 #include <linux/ptrace.h>
 #include <linux/unistd.h>
 #include <linux/stddef.h>
+#include <linux/tracehook.h>
 #include <asm/ucontext.h>
 #include <asm/uaccess.h>
 #include <asm/pgtable.h>
@@ -42,7 +43,84 @@
 
 #define _BLOCKABLE (~(sigmask(SIGKILL) | sigmask(SIGSTOP)))
 
-asmlinkage int do_signal(struct pt_regs *regs, sigset_t *oldset);
+/*
+ * Note that 'init' is a special process: it doesn't get signals it doesn't
+ * want to handle. Thus you cannot kill init even with a SIGKILL even by
+ * mistake.
+ *
+ * Note that we go through the signals twice: once to check the signals that
+ * the kernel can handle, and then we build all the user-level signal handling
+ * stack-frames in one go after that.
+ */
+static int do_signal(struct pt_regs *regs, sigset_t *oldset)
+{
+	siginfo_t info;
+	int signr;
+	struct k_sigaction ka;
+
+	/*
+	 * We want the common case to go fast, which
+	 * is why we may in certain cases get here from
+	 * kernel mode. Just return without doing anything
+	 * if so.
+	 */
+	if (!user_mode(regs))
+		return 1;
+
+	if (try_to_freeze())
+		goto no_signal;
+
+	if (test_thread_flag(TIF_RESTORE_SIGMASK))
+		oldset = &current->saved_sigmask;
+	else if (!oldset)
+		oldset = &current->blocked;
+
+	signr = get_signal_to_deliver(&info, &ka, regs, 0);
+
+	if (signr > 0) {
+		/* Whee!  Actually deliver the signal.  */
+		handle_signal(signr, &info, &ka, oldset, regs);
+
+		/*
+		 * If a signal was successfully delivered, the saved sigmask
+		 * is in its frame, and we can clear the TIF_RESTORE_SIGMASK
+		 * flag.
+		 */
+		if (test_thread_flag(TIF_RESTORE_SIGMASK))
+			clear_thread_flag(TIF_RESTORE_SIGMASK);
+
+		tracehook_signal_handler(signr, &info, &ka, regs, 0);
+		return 1;
+	}
+
+no_signal:
+	/* Did we come from a system call? */
+	if (regs->syscall_nr >= 0) {
+		/* Restart the system call - no handlers present */
+		switch (regs->regs[REG_RET]) {
+		case -ERESTARTNOHAND:
+		case -ERESTARTSYS:
+		case -ERESTARTNOINTR:
+			/* Decode Syscall # */
+			regs->regs[REG_RET] = regs->syscall_nr;
+			regs->pc -= 4;
+			break;
+
+		case -ERESTART_RESTARTBLOCK:
+			regs->regs[REG_RET] = __NR_restart_syscall;
+			regs->pc -= 4;
+			break;
+		}
+	}
+
+	/* No signal to deliver -- put the saved sigmask back */
+	if (test_thread_flag(TIF_RESTORE_SIGMASK)) {
+		clear_thread_flag(TIF_RESTORE_SIGMASK);
+		sigprocmask(SIG_SETMASK, &current->saved_sigmask, NULL);
+	}
+
+	return 0;
+}
 
 /*
  * Atomically swap in the new signal mask, and wait for a signal.
@@ -643,14 +721,13 @@ handle_signal(unsigned long sig, siginfo_t *info, struct k_sigaction *ka,
 		switch (regs->regs[REG_RET]) {
 			case -ERESTART_RESTARTBLOCK:
 			case -ERESTARTNOHAND:
+			no_system_call_restart:
 				regs->regs[REG_RET] = -EINTR;
 				break;
 
 			case -ERESTARTSYS:
-				if (!(ka->sa.sa_flags & SA_RESTART)) {
-					regs->regs[REG_RET] = -EINTR;
-					break;
-				}
+				if (!(ka->sa.sa_flags & SA_RESTART))
+					goto no_system_call_restart;
 			/* fallthrough */
 			case -ERESTARTNOINTR:
 				/* Decode syscall # */
@@ -673,80 +750,13 @@ handle_signal(unsigned long sig, siginfo_t *info, struct k_sigaction *ka,
 	spin_unlock_irq(&current->sighand->siglock);
 }
 
-/*
- * Note that 'init' is a special process: it doesn't get signals it doesn't
- * want to handle. Thus you cannot kill init even with a SIGKILL even by
- * mistake.
- *
- * Note that we go through the signals twice: once to check the signals that
- * the kernel can handle, and then we build all the user-level signal handling
- * stack-frames in one go after that.
- */
-int do_signal(struct pt_regs *regs, sigset_t *oldset)
+asmlinkage void do_notify_resume(struct pt_regs *regs, unsigned long thread_info_flags)
 {
-	siginfo_t info;
-	int signr;
-	struct k_sigaction ka;
-
-	/*
-	 * We want the common case to go fast, which
-	 * is why we may in certain cases get here from
-	 * kernel mode. Just return without doing anything
-	 * if so.
-	 */
-	if (!user_mode(regs))
-		return 1;
-
-	if (try_to_freeze())
-		goto no_signal;
-
-	if (test_thread_flag(TIF_RESTORE_SIGMASK))
-		oldset = &current->saved_sigmask;
-	else if (!oldset)
-		oldset = &current->blocked;
-
-	signr = get_signal_to_deliver(&info, &ka, regs, 0);
-
-	if (signr > 0) {
-		/* Whee!  Actually deliver the signal.  */
-		handle_signal(signr, &info, &ka, oldset, regs);
+	if (thread_info_flags & _TIF_SIGPENDING)
+		do_signal(regs, 0);
 
-		/*
-		 * If a signal was successfully delivered, the saved sigmask
-		 * is in its frame, and we can clear the TIF_RESTORE_SIGMASK
-		 * flag.
-		 */
-		if (test_thread_flag(TIF_RESTORE_SIGMASK))
-			clear_thread_flag(TIF_RESTORE_SIGMASK);
-
-		return 1;
+	if (thread_info_flags & _TIF_NOTIFY_RESUME) {
+		clear_thread_flag(TIF_NOTIFY_RESUME);
+		tracehook_notify_resume(regs);
 	}
-
-no_signal:
-	/* Did we come from a system call? */
-	if (regs->syscall_nr >= 0) {
-		/* Restart the system call - no handlers present */
-		switch (regs->regs[REG_RET]) {
-		case -ERESTARTNOHAND:
-		case -ERESTARTSYS:
-		case -ERESTARTNOINTR:
-			/* Decode Syscall # */
-			regs->regs[REG_RET] = regs->syscall_nr;
-			regs->pc -= 4;
-			break;
-
-		case -ERESTART_RESTARTBLOCK:
-			regs->regs[REG_RET] = __NR_restart_syscall;
-			regs->pc -= 4;
-			break;
-		}
-	}
-
-	/* No signal to deliver -- put the saved sigmask back */
-	if (test_thread_flag(TIF_RESTORE_SIGMASK)) {
-		clear_thread_flag(TIF_RESTORE_SIGMASK);
-		sigprocmask(SIG_SETMASK, &current->saved_sigmask, NULL);
-	}
-
-	return 0;
 }
diff --git a/arch/sh/kernel/syscalls_32.S b/arch/sh/kernel/syscalls_32.S
index a46cc3a41148..0af693e65764 100644
--- a/arch/sh/kernel/syscalls_32.S
+++ b/arch/sh/kernel/syscalls_32.S
@@ -343,3 +343,9 @@ ENTRY(sys_call_table)
 	.long sys_fallocate
 	.long sys_timerfd_settime	/* 325 */
 	.long sys_timerfd_gettime
+	.long sys_signalfd4
+	.long sys_eventfd2
+	.long sys_epoll_create1
+	.long sys_dup3			/* 330 */
+	.long sys_pipe2
+	.long sys_inotify_init1
diff --git a/arch/sh/kernel/syscalls_64.S b/arch/sh/kernel/syscalls_64.S
index d5d7843aad94..0b436aa3cad7 100644
--- a/arch/sh/kernel/syscalls_64.S
+++ b/arch/sh/kernel/syscalls_64.S
@@ -381,3 +381,9 @@ sys_call_table:
 	.long sys_fallocate
 	.long sys_timerfd_settime
 	.long sys_timerfd_gettime
+	.long sys_signalfd4		/* 355 */
+	.long sys_eventfd2
+	.long sys_epoll_create1
+	.long sys_dup3
+	.long sys_pipe2
+	.long sys_inotify_init1		/* 360 */
diff --git a/arch/sh/kernel/time_32.c b/arch/sh/kernel/time_32.c
index 7281342c044d..0758b5ee8180 100644
--- a/arch/sh/kernel/time_32.c
+++ b/arch/sh/kernel/time_32.c
@@ -211,7 +211,7 @@ unsigned long sh_hpt_frequency = 0;
 
 #define NSEC_PER_CYC_SHIFT	10
 
-struct clocksource clocksource_sh = {
+static struct clocksource clocksource_sh = {
 	.name		= "SuperH",
 	.rating		= 200,
 	.mask		= CLOCKSOURCE_MASK(32),
diff --git a/arch/sh/kernel/time_64.c b/arch/sh/kernel/time_64.c
index 022a55f1c1d4..791edabf7d83 100644
--- a/arch/sh/kernel/time_64.c
+++ b/arch/sh/kernel/time_64.c
@@ -33,8 +33,8 @@
 #include <linux/irq.h>
 #include <linux/io.h>
 #include <linux/platform_device.h>
-#include <asm/cpu/registers.h>	 /* required by inline __asm__ stmt. */
-#include <asm/cpu/irq.h>
+#include <cpu/registers.h>	 /* required by inline __asm__ stmt. */
+#include <cpu/irq.h>
 #include <asm/addrspace.h>
 #include <asm/processor.h>
 #include <asm/uaccess.h>
diff --git a/arch/sh/kernel/timers/timer-tmu.c b/arch/sh/kernel/timers/timer-tmu.c
index 8935570008d2..1ca9ad49b541 100644
--- a/arch/sh/kernel/timers/timer-tmu.c
+++ b/arch/sh/kernel/timers/timer-tmu.c
@@ -209,7 +209,7 @@ static int tmu_timer_init(void)
 	return 0;
 }
 
-struct sys_timer_ops tmu_timer_ops = {
+static struct sys_timer_ops tmu_timer_ops = {
 	.init		= tmu_timer_init,
 	.start		= tmu_timer_start,
 	.stop		= tmu_timer_stop,
diff --git a/arch/sh/kernel/traps_32.c b/arch/sh/kernel/traps_32.c
index e08b3bfeb656..511a9426cec5 100644
--- a/arch/sh/kernel/traps_32.c
+++ b/arch/sh/kernel/traps_32.c
@@ -43,6 +43,7 @@
 # define TRAP_ILLEGAL_SLOT_INST	6
 # define TRAP_ADDRESS_ERROR	9
 # ifdef CONFIG_CPU_SH2A
+#  define TRAP_FPU_ERROR	13
 #  define TRAP_DIVZERO_ERROR	17
 #  define TRAP_DIVOVF_ERROR	18
 # endif
@@ -851,6 +852,9 @@ void __init trap_init(void)
 #ifdef CONFIG_CPU_SH2A
 	set_exception_table_vec(TRAP_DIVZERO_ERROR, do_divide_error);
 	set_exception_table_vec(TRAP_DIVOVF_ERROR, do_divide_error);
+#ifdef CONFIG_SH_FPU
+	set_exception_table_vec(TRAP_FPU_ERROR, fpu_error_trap_handler);
+#endif
 #endif
 
 	/* Setup VBR for boot cpu */
diff --git a/arch/sh/lib/Makefile b/arch/sh/lib/Makefile
index ebb55d1149f5..8596cc78e18d 100644
--- a/arch/sh/lib/Makefile
+++ b/arch/sh/lib/Makefile
@@ -2,9 +2,11 @@
 # Makefile for SuperH-specific library files..
 #
 
-lib-y  = delay.o io.o memset.o memmove.o memchr.o \
+lib-y  = delay.o memset.o memmove.o memchr.o \
 	 checksum.o strlen.o div64.o div64-generic.o
 
+obj-y				+= io.o
+
 memcpy-y			:= memcpy.o
 memcpy-$(CONFIG_CPU_SH4)	:= memcpy-sh4.o
 
diff --git a/arch/sh/lib64/panic.c b/arch/sh/lib64/panic.c
index ff559e2a96f7..da32ba7b5fcc 100644
--- a/arch/sh/lib64/panic.c
+++ b/arch/sh/lib64/panic.c
@@ -8,7 +8,7 @@
 
 #include <linux/kernel.h>
 #include <asm/io.h>
-#include <asm/cpu/registers.h>
+#include <cpu/registers.h>
 
 /* THIS IS A PHYSICAL ADDRESS */
 #define HDSP2534_ADDR (0x04002100)
diff --git a/arch/sh/mm/Kconfig b/arch/sh/mm/Kconfig
index 5fd218430b19..8a03926ea84f 100644
--- a/arch/sh/mm/Kconfig
+++ b/arch/sh/mm/Kconfig
@@ -145,32 +145,48 @@ choice
 
 config PAGE_SIZE_4KB
 	bool "4kB"
-	depends on !X2TLB
+	depends on !MMU || !X2TLB
 	help
 	  This is the default page size used by all SuperH CPUs.
 
 config PAGE_SIZE_8KB
 	bool "8kB"
-	depends on X2TLB
+	depends on !MMU || X2TLB
 	help
 	  This enables 8kB pages as supported by SH-X2 and later MMUs.
 
+config PAGE_SIZE_16KB
+	bool "16kB"
+	depends on !MMU
+	help
+	  This enables 16kB pages on MMU-less SH systems.
+
 config PAGE_SIZE_64KB
 	bool "64kB"
-	depends on CPU_SH4 || CPU_SH5
+	depends on !MMU || CPU_SH4 || CPU_SH5
 	help
 	  This enables support for 64kB pages, possible on all SH-4
 	  CPUs and later.
 
 endchoice
 
+config ENTRY_OFFSET
+	hex
+	default "0x00001000" if PAGE_SIZE_4KB
+	default "0x00002000" if PAGE_SIZE_8KB
+	default "0x00004000" if PAGE_SIZE_16KB
+	default "0x00010000" if PAGE_SIZE_64KB
+	default "0x00000000"
+
 choice
 	prompt "HugeTLB page size"
 	depends on HUGETLB_PAGE && (CPU_SH4 || CPU_SH5) && MMU
+	default HUGETLB_PAGE_SIZE_1MB if PAGE_SIZE_64KB
 	default HUGETLB_PAGE_SIZE_64K
 
 config HUGETLB_PAGE_SIZE_64K
 	bool "64kB"
+	depends on !PAGE_SIZE_64KB
 
 config HUGETLB_PAGE_SIZE_256K
 	bool "256kB"
@@ -223,7 +239,6 @@ choice
 
 config CACHE_WRITEBACK
 	bool "Write-back"
-	depends on CPU_SH2A || CPU_SH3 || CPU_SH4 || CPU_SH5
 
 config CACHE_WRITETHROUGH
 	bool "Write-through"
diff --git a/arch/sh/mm/Makefile_32 b/arch/sh/mm/Makefile_32
index e295db60b91b..70e0906023cc 100644
--- a/arch/sh/mm/Makefile_32
+++ b/arch/sh/mm/Makefile_32
@@ -5,12 +5,15 @@
 obj-y			:= init.o extable_32.o consistent.o
 
 ifndef CONFIG_CACHE_OFF
-obj-$(CONFIG_CPU_SH2)		+= cache-sh2.o
-obj-$(CONFIG_CPU_SH3)		+= cache-sh3.o
-obj-$(CONFIG_CPU_SH4)		+= cache-sh4.o
-obj-$(CONFIG_SH7705_CACHE_32KB)	+= cache-sh7705.o
+cache-$(CONFIG_CPU_SH2)		:= cache-sh2.o
+cache-$(CONFIG_CPU_SH2A)	:= cache-sh2a.o
+cache-$(CONFIG_CPU_SH3)		:= cache-sh3.o
+cache-$(CONFIG_CPU_SH4)		:= cache-sh4.o
+cache-$(CONFIG_SH7705_CACHE_32KB)	+= cache-sh7705.o
 endif
 
+obj-y			+= $(cache-y)
+
 mmu-y			:= tlb-nommu.o pg-nommu.o
 mmu-$(CONFIG_MMU)	:= fault_32.o tlbflush_32.o ioremap_32.o
 
diff --git a/arch/sh/mm/cache-debugfs.c b/arch/sh/mm/cache-debugfs.c
index c5b56d52b7d2..0e189ccd4a77 100644
--- a/arch/sh/mm/cache-debugfs.c
+++ b/arch/sh/mm/cache-debugfs.c
@@ -120,7 +120,7 @@ static const struct file_operations cache_debugfs_fops = {
 	.open		= cache_debugfs_open,
 	.read		= seq_read,
 	.llseek		= seq_lseek,
-	.release	= seq_release,
+	.release	= single_release,
 };
 
 static int __init cache_debugfs_init(void)
diff --git a/arch/sh/mm/cache-sh2.c b/arch/sh/mm/cache-sh2.c
index 6614033f6be9..c4e80d2b764b 100644
--- a/arch/sh/mm/cache-sh2.c
+++ b/arch/sh/mm/cache-sh2.c
@@ -2,6 +2,7 @@
  * arch/sh/mm/cache-sh2.c
  *
  * Copyright (C) 2002 Paul Mundt
+ * Copyright (C) 2008 Yoshinori Sato
  *
  * Released under the terms of the GNU GPL v2.0.
  */
@@ -24,8 +25,15 @@ void __flush_wback_region(void *start, int size)
 	end = ((unsigned long)start + size + L1_CACHE_BYTES-1)
 		& ~(L1_CACHE_BYTES-1);
 	for (v = begin; v < end; v+=L1_CACHE_BYTES) {
-		/* FIXME cache purge */
-		ctrl_outl((v & 0x1ffffc00), (v & 0x00000ff0) | 0x00000008);
+		unsigned long addr = CACHE_OC_ADDRESS_ARRAY | (v & 0x00000ff0);
+		int way;
+		for (way = 0; way < 4; way++) {
+			unsigned long data =  ctrl_inl(addr | (way << 12));
+			if ((data & CACHE_PHYSADDR_MASK) == (v & CACHE_PHYSADDR_MASK)) {
+				data &= ~SH_CACHE_UPDATED;
+				ctrl_outl(data, addr | (way << 12));
+			}
+		}
 	}
 }
 
@@ -37,21 +45,40 @@ void __flush_purge_region(void *start, int size)
 	begin = (unsigned long)start & ~(L1_CACHE_BYTES-1);
 	end = ((unsigned long)start + size + L1_CACHE_BYTES-1)
 		& ~(L1_CACHE_BYTES-1);
-	for (v = begin; v < end; v+=L1_CACHE_BYTES) {
-		ctrl_outl((v & 0x1ffffc00), (v & 0x00000ff0) | 0x00000008);
-	}
+
+	for (v = begin; v < end; v+=L1_CACHE_BYTES)
+		ctrl_outl((v & CACHE_PHYSADDR_MASK),
+			  CACHE_OC_ADDRESS_ARRAY | (v & 0x00000ff0) | 0x00000008);
 }
 
 void __flush_invalidate_region(void *start, int size)
 {
+#ifdef CONFIG_CACHE_WRITEBACK
+	/*
+	 * SH-2 does not support individual line invalidation, only a
+	 * global invalidate.
+	 */
+	unsigned long ccr;
+	unsigned long flags;
+	local_irq_save(flags);
+	jump_to_uncached();
+
+	ccr = ctrl_inl(CCR);
+	ccr |= CCR_CACHE_INVALIDATE;
+	ctrl_outl(ccr, CCR);
+
+	back_to_cached();
+	local_irq_restore(flags);
+#else
 	unsigned long v;
 	unsigned long begin, end;
 
 	begin = (unsigned long)start & ~(L1_CACHE_BYTES-1);
 	end = ((unsigned long)start + size + L1_CACHE_BYTES-1)
 		& ~(L1_CACHE_BYTES-1);
-	for (v = begin; v < end; v+=L1_CACHE_BYTES) {
-		ctrl_outl((v & 0x1ffffc00), (v & 0x00000ff0) | 0x00000008);
-	}
-}
 
+	for (v = begin; v < end; v+=L1_CACHE_BYTES)
+		ctrl_outl((v & CACHE_PHYSADDR_MASK),
+			  CACHE_OC_ADDRESS_ARRAY | (v & 0x00000ff0) | 0x00000008);
+#endif
+}
diff --git a/arch/sh/mm/cache-sh2a.c b/arch/sh/mm/cache-sh2a.c
new file mode 100644
index 000000000000..62c0c5f35120
--- /dev/null
+++ b/arch/sh/mm/cache-sh2a.c
@@ -0,0 +1,129 @@
+/*
+ * arch/sh/mm/cache-sh2a.c
+ *
+ * Copyright (C) 2008 Yoshinori Sato
+ *
+ * Released under the terms of the GNU GPL v2.0.
+ */
+
+#include <linux/init.h>
+#include <linux/mm.h>
+
+#include <asm/cache.h>
+#include <asm/addrspace.h>
+#include <asm/processor.h>
+#include <asm/cacheflush.h>
+#include <asm/io.h>
+
+void __flush_wback_region(void *start, int size)
+{
+	unsigned long v;
+	unsigned long begin, end;
+	unsigned long flags;
+
+	begin = (unsigned long)start & ~(L1_CACHE_BYTES-1);
+	end = ((unsigned long)start + size + L1_CACHE_BYTES-1)
+		& ~(L1_CACHE_BYTES-1);
+
+	local_irq_save(flags);
+	jump_to_uncached();
+
+	for (v = begin; v < end; v+=L1_CACHE_BYTES) {
+		unsigned long addr = CACHE_OC_ADDRESS_ARRAY | (v & 0x000007f0);
+		int way;
+		for (way = 0; way < 4; way++) {
+			unsigned long data =  ctrl_inl(addr | (way << 11));
+			if ((data & CACHE_PHYSADDR_MASK) == (v & CACHE_PHYSADDR_MASK)) {
+				data &= ~SH_CACHE_UPDATED;
+				ctrl_outl(data, addr | (way << 11));
+			}
+		}
+	}
+
+	back_to_cached();
+	local_irq_restore(flags);
+}
+
+void __flush_purge_region(void *start, int size)
+{
+	unsigned long v;
+	unsigned long begin, end;
+	unsigned long flags;
+
+	begin = (unsigned long)start & ~(L1_CACHE_BYTES-1);
+	end = ((unsigned long)start + size + L1_CACHE_BYTES-1)
+		& ~(L1_CACHE_BYTES-1);
+
+	local_irq_save(flags);
+	jump_to_uncached();
+
+	for (v = begin; v < end; v+=L1_CACHE_BYTES) {
+		ctrl_outl((v & CACHE_PHYSADDR_MASK),
+			  CACHE_OC_ADDRESS_ARRAY | (v & 0x000003f0) | 0x00000008);
+	}
+	back_to_cached();
+	local_irq_restore(flags);
+}
+
+void __flush_invalidate_region(void *start, int size)
+{
+	unsigned long v;
+	unsigned long begin, end;
+	unsigned long flags;
+
+	begin = (unsigned long)start & ~(L1_CACHE_BYTES-1);
+	end = ((unsigned long)start + size + L1_CACHE_BYTES-1)
+		& ~(L1_CACHE_BYTES-1);
+	local_irq_save(flags);
+	jump_to_uncached();
+
+#ifdef CONFIG_CACHE_WRITEBACK
+	ctrl_outl(ctrl_inl(CCR) | CCR_OCACHE_INVALIDATE, CCR);
+	/* I-cache invalidate */
+	for (v = begin; v < end; v+=L1_CACHE_BYTES) {
+		ctrl_outl((v & CACHE_PHYSADDR_MASK),
+			  CACHE_IC_ADDRESS_ARRAY | (v & 0x000003f0) | 0x00000008);
+	}
+#else
+	for (v = begin; v < end; v+=L1_CACHE_BYTES) {
+		ctrl_outl((v & CACHE_PHYSADDR_MASK),
+			  CACHE_IC_ADDRESS_ARRAY | (v & 0x000003f0) | 0x00000008);
+		ctrl_outl((v & CACHE_PHYSADDR_MASK),
+			  CACHE_OC_ADDRESS_ARRAY | (v & 0x000003f0) | 0x00000008);
+	}
+#endif
+	back_to_cached();
+	local_irq_restore(flags);
+}
+
+/* WBack O-Cache and flush I-Cache */
+void flush_icache_range(unsigned long start, unsigned long end)
+{
+	unsigned long v;
+	unsigned long flags;
+
+	start = start & ~(L1_CACHE_BYTES-1);
+	end = (end + L1_CACHE_BYTES-1) & ~(L1_CACHE_BYTES-1);
+
+	local_irq_save(flags);
+	jump_to_uncached();
+
+	for (v = start; v < end; v+=L1_CACHE_BYTES) {
+		unsigned long addr = (v & 0x000007f0);
+		int way;
+		/* O-Cache writeback */
+		for (way = 0; way < 4; way++) {
+			unsigned long data =  ctrl_inl(CACHE_OC_ADDRESS_ARRAY | addr | (way << 11));
+			if ((data & CACHE_PHYSADDR_MASK) == (v & CACHE_PHYSADDR_MASK)) {
+				data &= ~SH_CACHE_UPDATED;
+				ctrl_outl(data, CACHE_OC_ADDRESS_ARRAY | addr | (way << 11));
+			}
+		}
+		/* I-Cache invalidate */
+		ctrl_outl(addr,
+			  CACHE_IC_ADDRESS_ARRAY | addr | 0x00000008);
+	}
+
+	back_to_cached();
+	local_irq_restore(flags);
+}
diff --git a/arch/sh/mm/cache-sh4.c b/arch/sh/mm/cache-sh4.c
index 43d7ff6b6ec7..1fdc8d90254a 100644
--- a/arch/sh/mm/cache-sh4.c
+++ b/arch/sh/mm/cache-sh4.c
@@ -4,6 +4,7 @@
  * Copyright (C) 1999, 2000, 2002  Niibe Yutaka
  * Copyright (C) 2001 - 2007  Paul Mundt
  * Copyright (C) 2003  Richard Curnow
+ * Copyright (c) 2007 STMicroelectronics (R&D) Ltd.
  *
  * This file is subject to the terms and conditions of the GNU General Public
  * License.  See the file "COPYING" in the main directory of this archive
@@ -22,6 +23,7 @@
  * entirety.
  */
 #define MAX_DCACHE_PAGES	64	/* XXX: Tune for ways */
+#define MAX_ICACHE_PAGES	32
 
 static void __flush_dcache_segment_1way(unsigned long start,
 					unsigned long extent);
@@ -178,42 +180,45 @@ void __flush_invalidate_region(void *start, int size)
 /*
  * Write back the range of D-cache, and purge the I-cache.
  *
- * Called from kernel/module.c:sys_init_module and routine for a.out format.
+ * Called from kernel/module.c:sys_init_module and routine for a.out format,
+ * signal handler code and kprobes code
  */
 void flush_icache_range(unsigned long start, unsigned long end)
 {
-	flush_cache_all();
-}
-
-/*
- * Write back the D-cache and purge the I-cache for signal trampoline.
- * .. which happens to be the same behavior as flush_icache_range().
- * So, we simply flush out a line.
- */
-void __uses_jump_to_uncached flush_cache_sigtramp(unsigned long addr)
-{
-	unsigned long v, index;
-	unsigned long flags;
+	int icacheaddr;
+	unsigned long flags, v;
 	int i;
 
-	v = addr & ~(L1_CACHE_BYTES-1);
-	asm volatile("ocbwb	%0"
-		     : /* no output */
-		     : "m" (__m(v)));
-
-	index = CACHE_IC_ADDRESS_ARRAY |
-			(v & boot_cpu_data.icache.entry_mask);
-
-	local_irq_save(flags);
-	jump_to_uncached();
-
-	for (i = 0; i < boot_cpu_data.icache.ways;
-	     i++, index += boot_cpu_data.icache.way_incr)
-		ctrl_outl(0, index);	/* Clear out Valid-bit */
-
-	back_to_cached();
-	wmb();
-	local_irq_restore(flags);
+       /* If there are too many pages then just blow the caches */
+        if (((end - start) >> PAGE_SHIFT) >= MAX_ICACHE_PAGES) {
+                flush_cache_all();
+       } else {
+               /* selectively flush d-cache then invalidate the i-cache */
+               /* this is inefficient, so only use for small ranges */
+               start &= ~(L1_CACHE_BYTES-1);
+               end += L1_CACHE_BYTES-1;
+               end &= ~(L1_CACHE_BYTES-1);
+
+               local_irq_save(flags);
+               jump_to_uncached();
+
+               for (v = start; v < end; v+=L1_CACHE_BYTES) {
+                       asm volatile("ocbwb     %0"
+                                    : /* no output */
+                                    : "m" (__m(v)));
+
+                       icacheaddr = CACHE_IC_ADDRESS_ARRAY | (
+                                       v & cpu_data->icache.entry_mask);
+
+                       for (i = 0; i < cpu_data->icache.ways;
+                               i++, icacheaddr += cpu_data->icache.way_incr)
+                                       /* Clear i-cache line valid-bit */
+                                       ctrl_outl(0, icacheaddr);
+               }
+
+		back_to_cached();
+		local_irq_restore(flags);
+	}
 }
 
 static inline void flush_cache_4096(unsigned long start,
diff --git a/arch/sh/mm/consistent.c b/arch/sh/mm/consistent.c
index d3c33fc5b1c2..895bb3f335c7 100644
--- a/arch/sh/mm/consistent.c
+++ b/arch/sh/mm/consistent.c
@@ -10,6 +10,7 @@
  * for more details.
  */
 #include <linux/mm.h>
+#include <linux/platform_device.h>
 #include <linux/dma-mapping.h>
 #include <asm/cacheflush.h>
 #include <asm/addrspace.h>
@@ -27,21 +28,10 @@ void *dma_alloc_coherent(struct device *dev, size_t size,
 			   dma_addr_t *dma_handle, gfp_t gfp)
 {
 	void *ret, *ret_nocache;
-	struct dma_coherent_mem *mem = dev ? dev->dma_mem : NULL;
 	int order = get_order(size);
 
-	if (mem) {
-		int page = bitmap_find_free_region(mem->bitmap, mem->size,
-						     order);
-		if (page >= 0) {
-			*dma_handle = mem->device_base + (page << PAGE_SHIFT);
-			ret = mem->virt_base + (page << PAGE_SHIFT);
-			memset(ret, 0, size);
-			return ret;
-		}
-		if (mem->flags & DMA_MEMORY_EXCLUSIVE)
-			return NULL;
-	}
+	if (dma_alloc_from_coherent(dev, size, dma_handle, &ret))
+		return ret;
 
 	ret = (void *)__get_free_pages(gfp, order);
 	if (!ret)
@@ -71,11 +61,7 @@ void dma_free_coherent(struct device *dev, size_t size,
 	struct dma_coherent_mem *mem = dev ? dev->dma_mem : NULL;
 	int order = get_order(size);
 
-	if (mem && vaddr >= mem->virt_base && vaddr < (mem->virt_base + (mem->size << PAGE_SHIFT))) {
-		int page = (vaddr - mem->virt_base) >> PAGE_SHIFT;
-
-		bitmap_release_region(mem->bitmap, page, order);
-	} else {
+	if (!dma_release_from_coherent(dev, order, vaddr)) {
 		WARN_ON(irqs_disabled());	/* for portability */
 		BUG_ON(mem && mem->flags & DMA_MEMORY_EXCLUSIVE);
 		free_pages((unsigned long)phys_to_virt(dma_handle), order);
@@ -84,83 +70,6 @@ void dma_free_coherent(struct device *dev, size_t size,
 }
 EXPORT_SYMBOL(dma_free_coherent);
 
-int dma_declare_coherent_memory(struct device *dev, dma_addr_t bus_addr,
-				dma_addr_t device_addr, size_t size, int flags)
-{
-	void __iomem *mem_base = NULL;
-	int pages = size >> PAGE_SHIFT;
-	int bitmap_size = BITS_TO_LONGS(pages) * sizeof(long);
-
-	if ((flags & (DMA_MEMORY_MAP | DMA_MEMORY_IO)) == 0)
-		goto out;
-	if (!size)
-		goto out;
-	if (dev->dma_mem)
-		goto out;
-
-	/* FIXME: this routine just ignores DMA_MEMORY_INCLUDES_CHILDREN */
-
-	mem_base = ioremap_nocache(bus_addr, size);
-	if (!mem_base)
-		goto out;
-
-	dev->dma_mem = kmalloc(sizeof(struct dma_coherent_mem), GFP_KERNEL);
-	if (!dev->dma_mem)
-		goto out;
-	dev->dma_mem->bitmap = kzalloc(bitmap_size, GFP_KERNEL);
-	if (!dev->dma_mem->bitmap)
-		goto free1_out;
-
-	dev->dma_mem->virt_base = mem_base;
-	dev->dma_mem->device_base = device_addr;
-	dev->dma_mem->size = pages;
-	dev->dma_mem->flags = flags;
-
-	if (flags & DMA_MEMORY_MAP)
-		return DMA_MEMORY_MAP;
-
-	return DMA_MEMORY_IO;
-
- free1_out:
-	kfree(dev->dma_mem);
- out:
-	if (mem_base)
-		iounmap(mem_base);
-	return 0;
-}
-EXPORT_SYMBOL(dma_declare_coherent_memory);
-
-void dma_release_declared_memory(struct device *dev)
-{
-	struct dma_coherent_mem *mem = dev->dma_mem;
-
-	if (!mem)
-		return;
-	dev->dma_mem = NULL;
-	iounmap(mem->virt_base);
-	kfree(mem->bitmap);
-	kfree(mem);
-}
-EXPORT_SYMBOL(dma_release_declared_memory);
-
-void *dma_mark_declared_memory_occupied(struct device *dev,
-					dma_addr_t device_addr, size_t size)
-{
-	struct dma_coherent_mem *mem = dev->dma_mem;
-	int pages = (size + (device_addr & ~PAGE_MASK) + PAGE_SIZE - 1) >> PAGE_SHIFT;
-	int pos, err;
-
-	if (!mem)
-		return ERR_PTR(-EINVAL);
-
-	pos = (device_addr - mem->device_base) >> PAGE_SHIFT;
-	err = bitmap_allocate_region(mem->bitmap, pos, get_order(pages));
-	if (err != 0)
-		return ERR_PTR(err);
-	return mem->virt_base + (pos << PAGE_SHIFT);
-}
-EXPORT_SYMBOL(dma_mark_declared_memory_occupied);
-
 void dma_cache_sync(struct device *dev, void *vaddr, size_t size,
 		    enum dma_data_direction direction)
 {
@@ -185,3 +94,59 @@ void dma_cache_sync(struct device *dev, void *vaddr, size_t size,
 	}
 }
 EXPORT_SYMBOL(dma_cache_sync);
+
+static int __init memchunk_setup(char *str)
+{
+	return 1; /* accept anything that begins with "memchunk." */
+}
+__setup("memchunk.", memchunk_setup);
+
+static void memchunk_cmdline_override(char *name, unsigned long *sizep)
+{
+	char *p = boot_command_line;
+	int k = strlen(name);
+
+	while ((p = strstr(p, "memchunk."))) {
+		p += 9; /* strlen("memchunk.") */
+		if (!strncmp(name, p, k) && p[k] == '=') {
+			p += k + 1;
+			*sizep = memparse(p, NULL);
+			pr_info("%s: forcing memory chunk size to 0x%08lx\n",
+				name, *sizep);
+			break;
+		}
+	}
+}
+
+int platform_resource_setup_memory(struct platform_device *pdev,
+				   char *name, unsigned long memsize)
+{
+	struct resource *r;
+	dma_addr_t dma_handle;
+	void *buf;
+
+	r = pdev->resource + pdev->num_resources - 1;
+	if (r->flags) {
+		pr_warning("%s: unable to find empty space for resource\n",
+			name);
+		return -EINVAL;
+	}
+
+	memchunk_cmdline_override(name, &memsize);
+	if (!memsize)
+		return 0;
+
+	buf = dma_alloc_coherent(NULL, memsize, &dma_handle, GFP_KERNEL);
+	if (!buf) {
+		pr_warning("%s: unable to allocate memory\n", name);
+		return -ENOMEM;
+	}
+
+	memset(buf, 0, memsize);
+
+	r->flags = IORESOURCE_MEM;
+	r->start = dma_handle;
+	r->end = r->start + memsize - 1;
+	r->name = name;
+	return 0;
+}
diff --git a/arch/sh/mm/fault_32.c b/arch/sh/mm/fault_32.c
index d1fa27594c6e..0c776fdfbdda 100644
--- a/arch/sh/mm/fault_32.c
+++ b/arch/sh/mm/fault_32.c
@@ -37,16 +37,12 @@ asmlinkage void __kprobes do_page_fault(struct pt_regs *regs,
 	int fault;
 	siginfo_t info;
 
-	trace_hardirqs_on();
-	local_irq_enable();
-
 #ifdef CONFIG_SH_KGDB
 	if (kgdb_nofault && kgdb_bus_err_hook)
 		kgdb_bus_err_hook();
 #endif
 
 	tsk = current;
-	mm = tsk->mm;
 	si_code = SEGV_MAPERR;
 
 	if (unlikely(address >= TASK_SIZE)) {
@@ -88,6 +84,14 @@ asmlinkage void __kprobes do_page_fault(struct pt_regs *regs,
 		return;
 	}
 
+	/* Only enable interrupts if they were on before the fault */
+	if ((regs->sr & SR_IMASK) != SR_IMASK) {
+		trace_hardirqs_on();
+		local_irq_enable();
+	}
+
+	mm = tsk->mm;
+
 	/*
 	 * If we're in an interrupt or have no user
 	 * context, we must not take the fault..
diff --git a/arch/sh/mm/fault_64.c b/arch/sh/mm/fault_64.c
index 399d53710d2f..bd63b961b2a9 100644
--- a/arch/sh/mm/fault_64.c
+++ b/arch/sh/mm/fault_64.c
@@ -39,7 +39,7 @@
 #include <asm/uaccess.h>
 #include <asm/pgalloc.h>
 #include <asm/mmu_context.h>
-#include <asm/cpu/registers.h>
+#include <cpu/registers.h>
 
 /* Callable from fault.c, so not static */
 inline void __do_tlb_refill(unsigned long address,
diff --git a/arch/sh/mm/init.c b/arch/sh/mm/init.c
index d652d375eb1e..b75a7acd62fb 100644
--- a/arch/sh/mm/init.c
+++ b/arch/sh/mm/init.c
@@ -25,47 +25,6 @@ DEFINE_PER_CPU(struct mmu_gather, mmu_gathers);
 pgd_t swapper_pg_dir[PTRS_PER_PGD];
 unsigned long cached_to_uncached = 0;
 
-void show_mem(void)
-{
-	int total = 0, reserved = 0, free = 0;
-	int shared = 0, cached = 0, slab = 0;
-	pg_data_t *pgdat;
-
-	printk("Mem-info:\n");
-	show_free_areas();
-
-	for_each_online_pgdat(pgdat) {
-		unsigned long flags, i;
-
-		pgdat_resize_lock(pgdat, &flags);
-		for (i = 0; i < pgdat->node_spanned_pages; i++) {
-			struct page *page = pgdat_page_nr(pgdat, i);
-			total++;
-			if (PageReserved(page))
-				reserved++;
-			else if (PageSwapCache(page))
-				cached++;
-			else if (PageSlab(page))
-				slab++;
-			else if (!page_count(page))
-				free++;
-			else
-				shared += page_count(page) - 1;
-		}
-		pgdat_resize_unlock(pgdat, &flags);
-	}
-
-	printk("Free swap:       %6ldkB\n", nr_swap_pages<<(PAGE_SHIFT-10));
-	printk("%d pages of RAM\n", total);
-	printk("%d free pages\n", free);
-	printk("%d reserved pages\n", reserved);
-	printk("%d slab pages\n", slab);
-	printk("%d pages shared\n", shared);
-	printk("%d pages swap cached\n", cached);
-	printk(KERN_INFO "Total of %ld pages in page table cache\n",
-	       quicklist_total_size());
-}
-
 #ifdef CONFIG_MMU
 static void set_pte_phys(unsigned long addr, unsigned long phys, pgprot_t prot)
 {
diff --git a/arch/sh/mm/pg-sh4.c b/arch/sh/mm/pg-sh4.c
index 8c7a9ca79879..38870e0fc182 100644
--- a/arch/sh/mm/pg-sh4.c
+++ b/arch/sh/mm/pg-sh4.c
@@ -111,7 +111,7 @@ EXPORT_SYMBOL(copy_user_highpage);
 /*
  * For SH-4, we have our own implementation for ptep_get_and_clear
  */
-inline pte_t ptep_get_and_clear(struct mm_struct *mm, unsigned long addr, pte_t *ptep)
+pte_t ptep_get_and_clear(struct mm_struct *mm, unsigned long addr, pte_t *ptep)
 {
 	pte_t pte = *ptep;
 
diff --git a/arch/sh/mm/pg-sh7705.c b/arch/sh/mm/pg-sh7705.c
index 7f885b7f8aff..eaf25147194c 100644
--- a/arch/sh/mm/pg-sh7705.c
+++ b/arch/sh/mm/pg-sh7705.c
@@ -118,7 +118,7 @@ void copy_user_page(void *to, void *from, unsigned long address, struct page *pg
  * For SH7705, we have our own implementation for ptep_get_and_clear
  * Copied from pg-sh4.c
  */
-inline pte_t ptep_get_and_clear(struct mm_struct *mm, unsigned long addr, pte_t *ptep)
+pte_t ptep_get_and_clear(struct mm_struct *mm, unsigned long addr, pte_t *ptep)
 {
 	pte_t pte = *ptep;
 
diff --git a/arch/sh/mm/pmb.c b/arch/sh/mm/pmb.c
index 0b0ec6e04753..cef727669c87 100644
--- a/arch/sh/mm/pmb.c
+++ b/arch/sh/mm/pmb.c
@@ -293,7 +293,7 @@ void pmb_unmap(unsigned long addr)
 	} while (pmbe);
 }
 
-static void pmb_cache_ctor(struct kmem_cache *cachep, void *pmb)
+static void pmb_cache_ctor(void *pmb)
 {
 	struct pmb_entry *pmbe = pmb;
 
@@ -385,7 +385,7 @@ static const struct file_operations pmb_debugfs_fops = {
 	.open		= pmb_debugfs_open,
 	.read		= seq_read,
 	.llseek		= seq_lseek,
-	.release	= seq_release,
+	.release	= single_release,
 };
 
 static int __init pmb_debugfs_init(void)
diff --git a/arch/sh/mm/tlb-sh5.c b/arch/sh/mm/tlb-sh5.c
index f34274a1ded3..dae131243bcc 100644
--- a/arch/sh/mm/tlb-sh5.c
+++ b/arch/sh/mm/tlb-sh5.c
@@ -15,9 +15,7 @@
 #include <asm/mmu_context.h>
 
 /**
- * sh64_tlb_init
- *
- * Perform initial setup for the DTLB and ITLB.
+ * sh64_tlb_init - Perform initial setup for the DTLB and ITLB.
  */
 int __init sh64_tlb_init(void)
 {
@@ -46,9 +44,7 @@ int __init sh64_tlb_init(void)
 }
 
 /**
- * sh64_next_free_dtlb_entry
- *
- * Find the next available DTLB entry
+ * sh64_next_free_dtlb_entry - Find the next available DTLB entry
  */
 unsigned long long sh64_next_free_dtlb_entry(void)
 {
@@ -56,9 +52,7 @@ unsigned long long sh64_next_free_dtlb_entry(void)
 }
 
 /**
- * sh64_get_wired_dtlb_entry
- *
- * Allocate a wired (locked-in) entry in the DTLB
+ * sh64_get_wired_dtlb_entry - Allocate a wired (locked-in) entry in the DTLB
  */
 unsigned long long sh64_get_wired_dtlb_entry(void)
 {
@@ -71,12 +65,10 @@ unsigned long long sh64_get_wired_dtlb_entry(void)
 }
 
 /**
- * sh64_put_wired_dtlb_entry
+ * sh64_put_wired_dtlb_entry - Free a wired (locked-in) entry in the DTLB.
  *
  * @entry:	Address of TLB slot.
  *
- * Free a wired (locked-in) entry in the DTLB.
- *
  * Works like a stack, last one to allocate must be first one to free.
  */
 int sh64_put_wired_dtlb_entry(unsigned long long entry)
@@ -115,7 +107,7 @@ int sh64_put_wired_dtlb_entry(unsigned long long entry)
 }
 
 /**
- * sh64_setup_tlb_slot
+ * sh64_setup_tlb_slot - Load up a translation in a wired slot.
  *
  * @config_addr:	Address of TLB slot.
  * @eaddr:		Virtual address.
@@ -154,7 +146,7 @@ inline void sh64_setup_tlb_slot(unsigned long long config_addr,
 }
 
 /**
- * sh64_teardown_tlb_slot
+ * sh64_teardown_tlb_slot - Teardown a translation.
  *
  * @config_addr:	Address of TLB slot.
  *
diff --git a/arch/sh/tools/mach-types b/arch/sh/tools/mach-types
index 1bba7d36be90..0a11cc08f0a5 100644
--- a/arch/sh/tools/mach-types
+++ b/arch/sh/tools/mach-types
@@ -46,3 +46,7 @@ R2D_1			RTS7751R2D_1
 CAYMAN			SH_CAYMAN
 SDK7780			SH_SDK7780
 MIGOR			SH_MIGOR
+RSK7203			SH_RSK7203
+AP325RXA		SH_AP325RXA
+SH7763RDP		SH_SH7763RDP
+SH7785LCR		SH_SH7785LCR
diff --git a/arch/sparc/Kconfig b/arch/sparc/Kconfig
index 789724e61e83..a214002114ed 100644
--- a/arch/sparc/Kconfig
+++ b/arch/sparc/Kconfig
@@ -68,6 +68,7 @@ config SPARC
 	select HAVE_IDE
 	select HAVE_OPROFILE
 	select HAVE_ARCH_KGDB if !SMP
+	select HAVE_ARCH_TRACEHOOK
 
 # Identify this as a Sparc32 build
 config SPARC32
@@ -298,20 +299,6 @@ config UNIX98_PTYS
 	  Read the instructions in <file:Documentation/Changes> pertaining to
 	  pseudo terminals. It's safe to say N.
 
-config UNIX98_PTY_COUNT
-	int "Maximum number of Unix98 PTYs in use (0-2048)"
-	depends on UNIX98_PTYS
-	default "256"
-	help
-	  The maximum number of Unix98 PTYs that can be used at any one time.
-	  The default is 256, and should be enough for desktop systems. Server
-	  machines which support incoming telnet/rlogin/ssh connections and/or
-	  serve several X terminals may want to increase this: every incoming
-	  connection and every xterm uses up one PTY.
-
-	  When not in use, each additional set of 256 PTYs occupy
-	  approximately 8 KB of kernel memory on 32-bit architectures.
-
 endmenu
 
 source "fs/Kconfig"
diff --git a/arch/sparc/Makefile b/arch/sparc/Makefile
index 6668e6037af6..9592889a6fd0 100644
--- a/arch/sparc/Makefile
+++ b/arch/sparc/Makefile
@@ -52,20 +52,24 @@ endif
 export INIT_Y CORE_Y DRIVERS_Y NET_Y LIBS_Y HEAD_Y kallsyms.o
 
 # Default target
-all: image
+all: zImage
 
 boot := arch/sparc/boot
 
-image tftpboot.img: vmlinux
+image zImage tftpboot.img: vmlinux
 	$(Q)$(MAKE) $(build)=$(boot) $(boot)/$@
 
 archclean:
 	$(Q)$(MAKE) $(clean)=$(boot)
 
+# This is the image used for packaging
+KBUILD_IMAGE := $(boot)/zImage
+
 CLEAN_FILES += arch/$(ARCH)/boot/System.map
 
 # Don't use tabs in echo arguments.
 define archhelp
   echo  '* image        - kernel image ($(boot)/image)'
+  echo  '* zImage       - stripped kernel image ($(boot)/zImage)'
   echo  '  tftpboot.img - image prepared for tftp'
 endef
diff --git a/arch/sparc/boot/Makefile b/arch/sparc/boot/Makefile
index 22d331e1e941..3e77a9f52248 100644
--- a/arch/sparc/boot/Makefile
+++ b/arch/sparc/boot/Makefile
@@ -19,6 +19,9 @@ quiet_cmd_sysmap        = SYSMAP  $(obj)/System.map
       cmd_sysmap        = $(CONFIG_SHELL) $(srctree)/scripts/mksysmap
 quiet_cmd_image = LD      $@
       cmd_image = $(LD) $(LDFLAGS) $(EXTRA_LDFLAGS) $(LDFLAGS_$(@F)) -o $@
+quiet_cmd_strip = STRIP   $@
+      cmd_strip = $(STRIP) -R .comment -R .note -K sun4u_init -K _end -K _start $(obj)/image -o $@
+
 
 define rule_image
 	$(if $($(quiet)cmd_image),               \
@@ -49,6 +52,9 @@ LDFLAGS_image := -T arch/sparc/kernel/vmlinux.lds $(BTOBJS) \
 $(obj)/image: $(obj)/btfix.o FORCE
 	$(call if_changed_rule,image)
 
+$(obj)/zImage: $(obj)/image
+	$(call if_changed,strip)
+
 $(obj)/tftpboot.img: $(obj)/piggyback $(obj)/System.map $(obj)/image FORCE
 	$(call if_changed,elftoaout)
 	$(call if_changed,piggy)
diff --git a/arch/sparc/include/asm/Kbuild b/arch/sparc/include/asm/Kbuild
new file mode 100644
index 000000000000..a5f0ce734ff7
--- /dev/null
+++ b/arch/sparc/include/asm/Kbuild
@@ -0,0 +1,45 @@
+# User exported sparc header files
+include include/asm-generic/Kbuild.asm
+
+header-y += ipcbuf_32.h
+header-y += ipcbuf_64.h
+header-y += posix_types_32.h
+header-y += posix_types_64.h
+header-y += ptrace_32.h
+header-y += ptrace_64.h
+header-y += sigcontext_32.h
+header-y += sigcontext_64.h
+header-y += siginfo_32.h
+header-y += siginfo_64.h
+header-y += signal_32.h
+header-y += signal_64.h
+header-y += stat_32.h
+header-y += stat_64.h
+header-y += statfs_32.h
+header-y += statfs_64.h
+header-y += unistd_32.h
+header-y += unistd_64.h
+
+header-y += apc.h
+header-y += asi.h
+header-y += bpp.h
+header-y += display7seg.h
+header-y += envctrl.h
+header-y += fbio.h
+header-y += jsflash.h
+header-y += openprom.h
+header-y += openprom_32.h
+header-y += openprom_64.h
+header-y += openpromio.h
+header-y += perfctr.h
+header-y += psrcompat.h
+header-y += psr.h
+header-y += pstate.h
+header-y += reg.h
+header-y += reg_32.h
+header-y += reg_64.h
+header-y += traps.h
+header-y += uctx.h
+header-y += utrap.h
+header-y += vfc_ioctls.h
+header-y += watchdog.h
diff --git a/include/asm-sparc/agp.h b/arch/sparc/include/asm/agp.h
index c2456870b05c..c2456870b05c 100644
--- a/include/asm-sparc/agp.h
+++ b/arch/sparc/include/asm/agp.h
diff --git a/include/asm-sparc/apb.h b/arch/sparc/include/asm/apb.h
index 8f3b57db810f..8f3b57db810f 100644
--- a/include/asm-sparc/apb.h
+++ b/arch/sparc/include/asm/apb.h
diff --git a/include/asm-sparc/apc.h b/arch/sparc/include/asm/apc.h
index 24e9a7d4d97e..24e9a7d4d97e 100644
--- a/include/asm-sparc/apc.h
+++ b/arch/sparc/include/asm/apc.h
diff --git a/include/asm-sparc/asi.h b/arch/sparc/include/asm/asi.h
index 74703c5ef985..74703c5ef985 100644
--- a/include/asm-sparc/asi.h
+++ b/arch/sparc/include/asm/asi.h
diff --git a/include/asm-sparc/asmmacro.h b/arch/sparc/include/asm/asmmacro.h
index a619a4d97aae..a619a4d97aae 100644
--- a/include/asm-sparc/asmmacro.h
+++ b/arch/sparc/include/asm/asmmacro.h
diff --git a/arch/sparc/include/asm/atomic.h b/arch/sparc/include/asm/atomic.h
new file mode 100644
index 000000000000..8ff83d8cc33f
--- /dev/null
+++ b/arch/sparc/include/asm/atomic.h
@@ -0,0 +1,8 @@
+#ifndef ___ASM_SPARC_ATOMIC_H
+#define ___ASM_SPARC_ATOMIC_H
+#if defined(__sparc__) && defined(__arch64__)
+#include <asm/atomic_64.h>
+#else
+#include <asm/atomic_32.h>
+#endif
+#endif
diff --git a/include/asm-sparc/atomic_32.h b/arch/sparc/include/asm/atomic_32.h
index 5c944b5a8040..5c944b5a8040 100644
--- a/include/asm-sparc/atomic_32.h
+++ b/arch/sparc/include/asm/atomic_32.h
diff --git a/include/asm-sparc/atomic_64.h b/arch/sparc/include/asm/atomic_64.h
index 2c71ec4a3b18..2c71ec4a3b18 100644
--- a/include/asm-sparc/atomic_64.h
+++ b/arch/sparc/include/asm/atomic_64.h
diff --git a/arch/sparc/include/asm/auxio.h b/arch/sparc/include/asm/auxio.h
new file mode 100644
index 000000000000..13dc67f03011
--- /dev/null
+++ b/arch/sparc/include/asm/auxio.h
@@ -0,0 +1,8 @@
+#ifndef ___ASM_SPARC_AUXIO_H
+#define ___ASM_SPARC_AUXIO_H
+#if defined(__sparc__) && defined(__arch64__)
+#include <asm/auxio_64.h>
+#else
+#include <asm/auxio_32.h>
+#endif
+#endif
diff --git a/include/asm-sparc/auxio_32.h b/arch/sparc/include/asm/auxio_32.h
index 4db8f23db20f..e03e088be95f 100644
--- a/include/asm-sparc/auxio_32.h
+++ b/arch/sparc/include/asm/auxio_32.h
@@ -36,7 +36,7 @@
  * understand the hardware you are querying!
  */
 extern void set_auxio(unsigned char bits_on, unsigned char bits_off);
-extern unsigned char get_auxio(void); /* .../asm-sparc/floppy.h */
+extern unsigned char get_auxio(void); /* .../asm/floppy.h */
 
 /*
  * The following routines are provided for driver-compatibility
diff --git a/include/asm-sparc/auxio_64.h b/arch/sparc/include/asm/auxio_64.h
index f61cd1e3e395..f61cd1e3e395 100644
--- a/include/asm-sparc/auxio_64.h
+++ b/arch/sparc/include/asm/auxio_64.h
diff --git a/include/asm-sparc/auxvec.h b/arch/sparc/include/asm/auxvec.h
index ad6f360261f6..ad6f360261f6 100644
--- a/include/asm-sparc/auxvec.h
+++ b/arch/sparc/include/asm/auxvec.h
diff --git a/include/asm-sparc/backoff.h b/arch/sparc/include/asm/backoff.h
index fa1fdf67e350..fa1fdf67e350 100644
--- a/include/asm-sparc/backoff.h
+++ b/arch/sparc/include/asm/backoff.h
diff --git a/include/asm-sparc/bbc.h b/arch/sparc/include/asm/bbc.h
index 423a85800aae..423a85800aae 100644
--- a/include/asm-sparc/bbc.h
+++ b/arch/sparc/include/asm/bbc.h
diff --git a/include/asm-sparc/bitext.h b/arch/sparc/include/asm/bitext.h
index 297b2f2fcb49..297b2f2fcb49 100644
--- a/include/asm-sparc/bitext.h
+++ b/arch/sparc/include/asm/bitext.h
diff --git a/arch/sparc/include/asm/bitops.h b/arch/sparc/include/asm/bitops.h
new file mode 100644
index 000000000000..b1edd94bd64f
--- /dev/null
+++ b/arch/sparc/include/asm/bitops.h
@@ -0,0 +1,8 @@
+#ifndef ___ASM_SPARC_BITOPS_H
+#define ___ASM_SPARC_BITOPS_H
+#if defined(__sparc__) && defined(__arch64__)
+#include <asm/bitops_64.h>
+#else
+#include <asm/bitops_32.h>
+#endif
+#endif
diff --git a/include/asm-sparc/bitops_32.h b/arch/sparc/include/asm/bitops_32.h
index 68b98a7e6454..68b98a7e6454 100644
--- a/include/asm-sparc/bitops_32.h
+++ b/arch/sparc/include/asm/bitops_32.h
diff --git a/include/asm-sparc/bitops_64.h b/arch/sparc/include/asm/bitops_64.h
index bb87b8080220..bb87b8080220 100644
--- a/include/asm-sparc/bitops_64.h
+++ b/arch/sparc/include/asm/bitops_64.h
diff --git a/include/asm-sparc/bpp.h b/arch/sparc/include/asm/bpp.h
index 31f515e499a7..31f515e499a7 100644
--- a/include/asm-sparc/bpp.h
+++ b/arch/sparc/include/asm/bpp.h
diff --git a/include/asm-sparc/btfixup.h b/arch/sparc/include/asm/btfixup.h
index 08277e6fb4cd..797722cf69f2 100644
--- a/include/asm-sparc/btfixup.h
+++ b/arch/sparc/include/asm/btfixup.h
@@ -1,5 +1,5 @@
 /*
- *  asm-sparc/btfixup.h:    Macros for boot time linking.
+ *  asm/btfixup.h:    Macros for boot time linking.
  *
  *  Copyright (C) 1998 Jakub Jelinek (jj@sunsite.mff.cuni.cz)
  */
diff --git a/include/asm-sparc/bug.h b/arch/sparc/include/asm/bug.h
index 8a59e5a8c217..8a59e5a8c217 100644
--- a/include/asm-sparc/bug.h
+++ b/arch/sparc/include/asm/bug.h
diff --git a/arch/sparc/include/asm/bugs.h b/arch/sparc/include/asm/bugs.h
new file mode 100644
index 000000000000..e179bc12f64a
--- /dev/null
+++ b/arch/sparc/include/asm/bugs.h
@@ -0,0 +1,24 @@
+/* include/asm/bugs.h:  Sparc probes for various bugs.
+ *
+ * Copyright (C) 1996, 2007 David S. Miller (davem@davemloft.net)
+ */
+
+#ifdef CONFIG_SPARC32
+#include <asm/cpudata.h>
+#endif
+
+#ifdef CONFIG_SPARC64
+#include <asm/sstate.h>
+#endif
+
+extern unsigned long loops_per_jiffy;
+
+static void __init check_bugs(void)
+{
+#if defined(CONFIG_SPARC32) && !defined(CONFIG_SMP)
+	cpu_data(0).udelay_val = loops_per_jiffy;
+#endif
+#ifdef CONFIG_SPARC64
+	sstate_running();
+#endif
+}
diff --git a/include/asm-sparc/byteorder.h b/arch/sparc/include/asm/byteorder.h
index bcd83aa351c5..bcd83aa351c5 100644
--- a/include/asm-sparc/byteorder.h
+++ b/arch/sparc/include/asm/byteorder.h
diff --git a/include/asm-sparc/cache.h b/arch/sparc/include/asm/cache.h
index 41f85ae4bd4a..41f85ae4bd4a 100644
--- a/include/asm-sparc/cache.h
+++ b/arch/sparc/include/asm/cache.h
diff --git a/arch/sparc/include/asm/cacheflush.h b/arch/sparc/include/asm/cacheflush.h
new file mode 100644
index 000000000000..049168087b19
--- /dev/null
+++ b/arch/sparc/include/asm/cacheflush.h
@@ -0,0 +1,8 @@
+#ifndef ___ASM_SPARC_CACHEFLUSH_H
+#define ___ASM_SPARC_CACHEFLUSH_H
+#if defined(__sparc__) && defined(__arch64__)
+#include <asm/cacheflush_64.h>
+#else
+#include <asm/cacheflush_32.h>
+#endif
+#endif
diff --git a/include/asm-sparc/cacheflush_32.h b/arch/sparc/include/asm/cacheflush_32.h
index 68ac10910271..68ac10910271 100644
--- a/include/asm-sparc/cacheflush_32.h
+++ b/arch/sparc/include/asm/cacheflush_32.h
diff --git a/include/asm-sparc/cacheflush_64.h b/arch/sparc/include/asm/cacheflush_64.h
index c43321729b3b..c43321729b3b 100644
--- a/include/asm-sparc/cacheflush_64.h
+++ b/arch/sparc/include/asm/cacheflush_64.h
diff --git a/include/asm-sparc/chafsr.h b/arch/sparc/include/asm/chafsr.h
index 85c69b38220b..85c69b38220b 100644
--- a/include/asm-sparc/chafsr.h
+++ b/arch/sparc/include/asm/chafsr.h
diff --git a/arch/sparc/include/asm/checksum.h b/arch/sparc/include/asm/checksum.h
new file mode 100644
index 000000000000..7ac0d7497bc5
--- /dev/null
+++ b/arch/sparc/include/asm/checksum.h
@@ -0,0 +1,8 @@
+#ifndef ___ASM_SPARC_CHECKSUM_H
+#define ___ASM_SPARC_CHECKSUM_H
+#if defined(__sparc__) && defined(__arch64__)
+#include <asm/checksum_64.h>
+#else
+#include <asm/checksum_32.h>
+#endif
+#endif
diff --git a/include/asm-sparc/checksum_32.h b/arch/sparc/include/asm/checksum_32.h
index bdbda1453aa9..bdbda1453aa9 100644
--- a/include/asm-sparc/checksum_32.h
+++ b/arch/sparc/include/asm/checksum_32.h
diff --git a/include/asm-sparc/checksum_64.h b/arch/sparc/include/asm/checksum_64.h
index 019b9615e43c..019b9615e43c 100644
--- a/include/asm-sparc/checksum_64.h
+++ b/arch/sparc/include/asm/checksum_64.h
diff --git a/include/asm-sparc/chmctrl.h b/arch/sparc/include/asm/chmctrl.h
index 859b4a4b0d30..859b4a4b0d30 100644
--- a/include/asm-sparc/chmctrl.h
+++ b/arch/sparc/include/asm/chmctrl.h
diff --git a/include/asm-sparc/clock.h b/arch/sparc/include/asm/clock.h
index 2cf99dadec56..2cf99dadec56 100644
--- a/include/asm-sparc/clock.h
+++ b/arch/sparc/include/asm/clock.h
diff --git a/include/asm-sparc/cmt.h b/arch/sparc/include/asm/cmt.h
index 870db5928577..870db5928577 100644
--- a/include/asm-sparc/cmt.h
+++ b/arch/sparc/include/asm/cmt.h
diff --git a/include/asm-sparc/compat.h b/arch/sparc/include/asm/compat.h
index f260b58f5ce9..f260b58f5ce9 100644
--- a/include/asm-sparc/compat.h
+++ b/arch/sparc/include/asm/compat.h
diff --git a/include/asm-sparc/compat_signal.h b/arch/sparc/include/asm/compat_signal.h
index b759eab9b51c..b759eab9b51c 100644
--- a/include/asm-sparc/compat_signal.h
+++ b/arch/sparc/include/asm/compat_signal.h
diff --git a/include/asm-sparc/contregs.h b/arch/sparc/include/asm/contregs.h
index 48fa8a4ef357..48fa8a4ef357 100644
--- a/include/asm-sparc/contregs.h
+++ b/arch/sparc/include/asm/contregs.h
diff --git a/arch/sparc/include/asm/cpudata.h b/arch/sparc/include/asm/cpudata.h
new file mode 100644
index 000000000000..b5976de7cacd
--- /dev/null
+++ b/arch/sparc/include/asm/cpudata.h
@@ -0,0 +1,8 @@
+#ifndef ___ASM_SPARC_CPUDATA_H
+#define ___ASM_SPARC_CPUDATA_H
+#if defined(__sparc__) && defined(__arch64__)
+#include <asm/cpudata_64.h>
+#else
+#include <asm/cpudata_32.h>
+#endif
+#endif
diff --git a/include/asm-sparc/cpudata_32.h b/arch/sparc/include/asm/cpudata_32.h
index a2c4d51d36c4..31d48a0e32c7 100644
--- a/include/asm-sparc/cpudata_32.h
+++ b/arch/sparc/include/asm/cpudata_32.h
@@ -2,7 +2,7 @@
  *
  * Copyright (C) 2004 Keith M Wesolowski (wesolows@foobazco.org)
  *
- * Based on include/asm-sparc64/cpudata.h and Linux 2.4 smp.h
+ * Based on include/asm/cpudata.h and Linux 2.4 smp.h
  * both (C) David S. Miller.
  */
 
diff --git a/include/asm-sparc/cpudata_64.h b/arch/sparc/include/asm/cpudata_64.h
index 532975ecfe10..532975ecfe10 100644
--- a/include/asm-sparc/cpudata_64.h
+++ b/arch/sparc/include/asm/cpudata_64.h
diff --git a/include/asm-sparc/cputime.h b/arch/sparc/include/asm/cputime.h
index 1a642b81e019..1a642b81e019 100644
--- a/include/asm-sparc/cputime.h
+++ b/arch/sparc/include/asm/cputime.h
diff --git a/arch/sparc/include/asm/current.h b/arch/sparc/include/asm/current.h
new file mode 100644
index 000000000000..10a0df55a574
--- /dev/null
+++ b/arch/sparc/include/asm/current.h
@@ -0,0 +1,34 @@
+/* include/asm/current.h
+ *
+ * Copyright (C) 1999 IBM Deutschland Entwicklung GmbH, IBM Corporation
+ * Copyright (C) 2002 Pete Zaitcev (zaitcev@yahoo.com)
+ * Copyright (C) 2007 David S. Miller (davem@davemloft.net)
+ *
+ *  Derived from "include/asm-s390/current.h" by
+ *  Martin Schwidefsky (schwidefsky@de.ibm.com)
+ *  Derived from "include/asm-i386/current.h"
+*/
+#ifndef _SPARC_CURRENT_H
+#define _SPARC_CURRENT_H
+
+#include <linux/thread_info.h>
+
+#ifdef CONFIG_SPARC64
+register struct task_struct *current asm("g4");
+#endif
+
+#ifdef CONFIG_SPARC32
+/* We might want to consider using %g4 like sparc64 to shave a few cycles.
+ *
+ * Two stage process (inline + #define) for type-checking.
+ * We also obfuscate get_current() to check if anyone used that by mistake.
+ */
+struct task_struct;
+static inline struct task_struct *__get_current(void)
+{
+	return current_thread_info()->task;
+}
+#define current __get_current()
+#endif
+
+#endif /* !(_SPARC_CURRENT_H) */
diff --git a/include/asm-sparc/cypress.h b/arch/sparc/include/asm/cypress.h
index 95e9772ea394..95e9772ea394 100644
--- a/include/asm-sparc/cypress.h
+++ b/arch/sparc/include/asm/cypress.h
diff --git a/include/asm-sparc/dcr.h b/arch/sparc/include/asm/dcr.h
index 620c9ba642e9..620c9ba642e9 100644
--- a/include/asm-sparc/dcr.h
+++ b/arch/sparc/include/asm/dcr.h
diff --git a/include/asm-sparc/dcu.h b/arch/sparc/include/asm/dcu.h
index 0f704e106a1b..0f704e106a1b 100644
--- a/include/asm-sparc/dcu.h
+++ b/arch/sparc/include/asm/dcu.h
diff --git a/arch/sparc/include/asm/delay.h b/arch/sparc/include/asm/delay.h
new file mode 100644
index 000000000000..467caa2a97a0
--- /dev/null
+++ b/arch/sparc/include/asm/delay.h
@@ -0,0 +1,8 @@
+#ifndef ___ASM_SPARC_DELAY_H
+#define ___ASM_SPARC_DELAY_H
+#if defined(__sparc__) && defined(__arch64__)
+#include <asm/delay_64.h>
+#else
+#include <asm/delay_32.h>
+#endif
+#endif
diff --git a/include/asm-sparc/delay_32.h b/arch/sparc/include/asm/delay_32.h
index bc9aba2bead6..bc9aba2bead6 100644
--- a/include/asm-sparc/delay_32.h
+++ b/arch/sparc/include/asm/delay_32.h
diff --git a/include/asm-sparc/delay_64.h b/arch/sparc/include/asm/delay_64.h
index a77aa622d762..a77aa622d762 100644
--- a/include/asm-sparc/delay_64.h
+++ b/arch/sparc/include/asm/delay_64.h
diff --git a/include/asm-sparc/device.h b/arch/sparc/include/asm/device.h
index 19790eb99cc6..19790eb99cc6 100644
--- a/include/asm-sparc/device.h
+++ b/arch/sparc/include/asm/device.h
diff --git a/include/asm-sparc/display7seg.h b/arch/sparc/include/asm/display7seg.h
index 86d4a901df24..86d4a901df24 100644
--- a/include/asm-sparc/display7seg.h
+++ b/arch/sparc/include/asm/display7seg.h
diff --git a/include/asm-sparc/div64.h b/arch/sparc/include/asm/div64.h
index 6cd978cefb28..6cd978cefb28 100644
--- a/include/asm-sparc/div64.h
+++ b/arch/sparc/include/asm/div64.h
diff --git a/arch/sparc/include/asm/dma-mapping.h b/arch/sparc/include/asm/dma-mapping.h
new file mode 100644
index 000000000000..0f4150e26619
--- /dev/null
+++ b/arch/sparc/include/asm/dma-mapping.h
@@ -0,0 +1,8 @@
+#ifndef ___ASM_SPARC_DMA_MAPPING_H
+#define ___ASM_SPARC_DMA_MAPPING_H
+#if defined(__sparc__) && defined(__arch64__)
+#include <asm/dma-mapping_64.h>
+#else
+#include <asm/dma-mapping_32.h>
+#endif
+#endif
diff --git a/include/asm-sparc/dma-mapping_32.h b/arch/sparc/include/asm/dma-mapping_32.h
index f3a641e6b2c8..f3a641e6b2c8 100644
--- a/include/asm-sparc/dma-mapping_32.h
+++ b/arch/sparc/include/asm/dma-mapping_32.h
diff --git a/include/asm-sparc/dma-mapping_64.h b/arch/sparc/include/asm/dma-mapping_64.h
index 38cbec76a33f..bfa64f9702d5 100644
--- a/include/asm-sparc/dma-mapping_64.h
+++ b/arch/sparc/include/asm/dma-mapping_64.h
@@ -135,7 +135,7 @@ static inline void dma_sync_sg_for_device(struct device *dev,
 	/* No flushing needed to sync cpu writes to the device.  */
 }
 
-static inline int dma_mapping_error(dma_addr_t dma_addr)
+static inline int dma_mapping_error(struct device *dev, dma_addr_t dma_addr)
 {
 	return (dma_addr == DMA_ERROR_CODE);
 }
diff --git a/arch/sparc/include/asm/dma.h b/arch/sparc/include/asm/dma.h
new file mode 100644
index 000000000000..aa1d90ac04c5
--- /dev/null
+++ b/arch/sparc/include/asm/dma.h
@@ -0,0 +1,8 @@
+#ifndef ___ASM_SPARC_DMA_H
+#define ___ASM_SPARC_DMA_H
+#if defined(__sparc__) && defined(__arch64__)
+#include <asm/dma_64.h>
+#else
+#include <asm/dma_32.h>
+#endif
+#endif
diff --git a/include/asm-sparc/dma_32.h b/arch/sparc/include/asm/dma_32.h
index 959d6c8a71ae..cf7189c0079b 100644
--- a/include/asm-sparc/dma_32.h
+++ b/arch/sparc/include/asm/dma_32.h
@@ -1,4 +1,4 @@
-/* include/asm-sparc/dma.h
+/* include/asm/dma.h
  *
  * Copyright 1995 (C) David S. Miller (davem@davemloft.net)
  */
diff --git a/include/asm-sparc/dma_64.h b/arch/sparc/include/asm/dma_64.h
index 9d4c024bd3b3..46a8aecffc02 100644
--- a/include/asm-sparc/dma_64.h
+++ b/arch/sparc/include/asm/dma_64.h
@@ -1,5 +1,5 @@
 /*
- * include/asm-sparc64/dma.h
+ * include/asm/dma.h
  *
  * Copyright 1996 (C) David S. Miller (davem@caip.rutgers.edu)
  */
diff --git a/arch/sparc/include/asm/ebus.h b/arch/sparc/include/asm/ebus.h
new file mode 100644
index 000000000000..83a6d16c22e6
--- /dev/null
+++ b/arch/sparc/include/asm/ebus.h
@@ -0,0 +1,8 @@
+#ifndef ___ASM_SPARC_EBUS_H
+#define ___ASM_SPARC_EBUS_H
+#if defined(__sparc__) && defined(__arch64__)
+#include <asm/ebus_64.h>
+#else
+#include <asm/ebus_32.h>
+#endif
+#endif
diff --git a/include/asm-sparc/ebus_32.h b/arch/sparc/include/asm/ebus_32.h
index 29cb7dfc6b79..f91f0b267ce1 100644
--- a/include/asm-sparc/ebus_32.h
+++ b/arch/sparc/include/asm/ebus_32.h
@@ -12,9 +12,9 @@
 #ifndef _LINUX_IOPORT_H
 #include <linux/ioport.h>
 #endif
+#include <linux/of_device.h>
 #include <asm/oplib.h>
 #include <asm/prom.h>
-#include <asm/of_device.h>
 
 struct linux_ebus_child {
 	struct linux_ebus_child		*next;
diff --git a/include/asm-sparc/ebus_64.h b/arch/sparc/include/asm/ebus_64.h
index fcc62b97ced5..14c6a111f60c 100644
--- a/include/asm-sparc/ebus_64.h
+++ b/arch/sparc/include/asm/ebus_64.h
@@ -8,9 +8,10 @@
 #ifndef __SPARC64_EBUS_H
 #define __SPARC64_EBUS_H
 
+#include <linux/of_device.h>
+
 #include <asm/oplib.h>
 #include <asm/prom.h>
-#include <asm/of_device.h>
 
 struct linux_ebus_child {
 	struct linux_ebus_child		*next;
diff --git a/include/asm-sparc/ecc.h b/arch/sparc/include/asm/ecc.h
index ccb84b66fef1..ccb84b66fef1 100644
--- a/include/asm-sparc/ecc.h
+++ b/arch/sparc/include/asm/ecc.h
diff --git a/include/asm-sparc/eeprom.h b/arch/sparc/include/asm/eeprom.h
index e17beeceb405..e17beeceb405 100644
--- a/include/asm-sparc/eeprom.h
+++ b/arch/sparc/include/asm/eeprom.h
diff --git a/arch/sparc/include/asm/elf.h b/arch/sparc/include/asm/elf.h
new file mode 100644
index 000000000000..0a2816c50b07
--- /dev/null
+++ b/arch/sparc/include/asm/elf.h
@@ -0,0 +1,8 @@
+#ifndef ___ASM_SPARC_ELF_H
+#define ___ASM_SPARC_ELF_H
+#if defined(__sparc__) && defined(__arch64__)
+#include <asm/elf_64.h>
+#else
+#include <asm/elf_32.h>
+#endif
+#endif
diff --git a/include/asm-sparc/elf_32.h b/arch/sparc/include/asm/elf_32.h
index d043f80bc2fd..d043f80bc2fd 100644
--- a/include/asm-sparc/elf_32.h
+++ b/arch/sparc/include/asm/elf_32.h
diff --git a/include/asm-sparc/elf_64.h b/arch/sparc/include/asm/elf_64.h
index 0818a1308f4e..0818a1308f4e 100644
--- a/include/asm-sparc/elf_64.h
+++ b/arch/sparc/include/asm/elf_64.h
diff --git a/include/asm-sparc/emergency-restart.h b/arch/sparc/include/asm/emergency-restart.h
index 108d8c48e42e..108d8c48e42e 100644
--- a/include/asm-sparc/emergency-restart.h
+++ b/arch/sparc/include/asm/emergency-restart.h
diff --git a/include/asm-sparc/envctrl.h b/arch/sparc/include/asm/envctrl.h
index 624fa7e2da8e..624fa7e2da8e 100644
--- a/include/asm-sparc/envctrl.h
+++ b/arch/sparc/include/asm/envctrl.h
diff --git a/include/asm-sparc/errno.h b/arch/sparc/include/asm/errno.h
index a9ef172977de..a9ef172977de 100644
--- a/include/asm-sparc/errno.h
+++ b/arch/sparc/include/asm/errno.h
diff --git a/include/asm-sparc/estate.h b/arch/sparc/include/asm/estate.h
index 520c08560d1b..520c08560d1b 100644
--- a/include/asm-sparc/estate.h
+++ b/arch/sparc/include/asm/estate.h
diff --git a/include/asm-sparc/fb.h b/arch/sparc/include/asm/fb.h
index b83e44729655..b83e44729655 100644
--- a/include/asm-sparc/fb.h
+++ b/arch/sparc/include/asm/fb.h
diff --git a/include/asm-sparc/fbio.h b/arch/sparc/include/asm/fbio.h
index b9215a0907d3..b9215a0907d3 100644
--- a/include/asm-sparc/fbio.h
+++ b/arch/sparc/include/asm/fbio.h
diff --git a/include/asm-sparc/fcntl.h b/arch/sparc/include/asm/fcntl.h
index d4d9c9d852c3..d4d9c9d852c3 100644
--- a/include/asm-sparc/fcntl.h
+++ b/arch/sparc/include/asm/fcntl.h
diff --git a/include/asm-sparc/fhc.h b/arch/sparc/include/asm/fhc.h
index 788cbc46a116..788cbc46a116 100644
--- a/include/asm-sparc/fhc.h
+++ b/arch/sparc/include/asm/fhc.h
diff --git a/include/asm-sparc/fixmap.h b/arch/sparc/include/asm/fixmap.h
index f18fc0755adf..f18fc0755adf 100644
--- a/include/asm-sparc/fixmap.h
+++ b/arch/sparc/include/asm/fixmap.h
diff --git a/arch/sparc/include/asm/floppy.h b/arch/sparc/include/asm/floppy.h
new file mode 100644
index 000000000000..faebd335b600
--- /dev/null
+++ b/arch/sparc/include/asm/floppy.h
@@ -0,0 +1,8 @@
+#ifndef ___ASM_SPARC_FLOPPY_H
+#define ___ASM_SPARC_FLOPPY_H
+#if defined(__sparc__) && defined(__arch64__)
+#include <asm/floppy_64.h>
+#else
+#include <asm/floppy_32.h>
+#endif
+#endif
diff --git a/include/asm-sparc/floppy_32.h b/arch/sparc/include/asm/floppy_32.h
index acdd06eafe59..ae3f00bf22ff 100644
--- a/include/asm-sparc/floppy_32.h
+++ b/arch/sparc/include/asm/floppy_32.h
@@ -1,4 +1,4 @@
-/* asm-sparc/floppy.h: Sparc specific parts of the Floppy driver.
+/* asm/floppy.h: Sparc specific parts of the Floppy driver.
  *
  * Copyright (C) 1995 David S. Miller (davem@davemloft.net)
  */
diff --git a/include/asm-sparc/floppy_64.h b/arch/sparc/include/asm/floppy_64.h
index c39db1060bc7..c39db1060bc7 100644
--- a/include/asm-sparc/floppy_64.h
+++ b/arch/sparc/include/asm/floppy_64.h
diff --git a/include/asm-sparc/fpumacro.h b/arch/sparc/include/asm/fpumacro.h
index cc463fec806f..cc463fec806f 100644
--- a/include/asm-sparc/fpumacro.h
+++ b/arch/sparc/include/asm/fpumacro.h
diff --git a/include/asm-sparc64/ftrace.h b/arch/sparc/include/asm/ftrace.h
index d27716cd38c1..d27716cd38c1 100644
--- a/include/asm-sparc64/ftrace.h
+++ b/arch/sparc/include/asm/ftrace.h
diff --git a/arch/sparc/include/asm/futex.h b/arch/sparc/include/asm/futex.h
new file mode 100644
index 000000000000..736335f36713
--- /dev/null
+++ b/arch/sparc/include/asm/futex.h
@@ -0,0 +1,8 @@
+#ifndef ___ASM_SPARC_FUTEX_H
+#define ___ASM_SPARC_FUTEX_H
+#if defined(__sparc__) && defined(__arch64__)
+#include <asm/futex_64.h>
+#else
+#include <asm/futex_32.h>
+#endif
+#endif
diff --git a/include/asm-sparc/futex_32.h b/arch/sparc/include/asm/futex_32.h
index 6a332a9f099c..6a332a9f099c 100644
--- a/include/asm-sparc/futex_32.h
+++ b/arch/sparc/include/asm/futex_32.h
diff --git a/include/asm-sparc/futex_64.h b/arch/sparc/include/asm/futex_64.h
index d8378935ae90..47f95839dc69 100644
--- a/include/asm-sparc/futex_64.h
+++ b/arch/sparc/include/asm/futex_64.h
@@ -59,7 +59,7 @@ static inline int futex_atomic_op_inuser(int encoded_op, int __user *uaddr)
 		__futex_cas_op("or\t%2, %4, %1", ret, oldval, uaddr, oparg);
 		break;
 	case FUTEX_OP_ANDN:
-		__futex_cas_op("and\t%2, %4, %1", ret, oldval, uaddr, oparg);
+		__futex_cas_op("andn\t%2, %4, %1", ret, oldval, uaddr, oparg);
 		break;
 	case FUTEX_OP_XOR:
 		__futex_cas_op("xor\t%2, %4, %1", ret, oldval, uaddr, oparg);
diff --git a/arch/sparc/include/asm/hardirq.h b/arch/sparc/include/asm/hardirq.h
new file mode 100644
index 000000000000..44d4e2345148
--- /dev/null
+++ b/arch/sparc/include/asm/hardirq.h
@@ -0,0 +1,8 @@
+#ifndef ___ASM_SPARC_HARDIRQ_H
+#define ___ASM_SPARC_HARDIRQ_H
+#if defined(__sparc__) && defined(__arch64__)
+#include <asm/hardirq_64.h>
+#else
+#include <asm/hardirq_32.h>
+#endif
+#endif
diff --git a/include/asm-sparc/hardirq_32.h b/arch/sparc/include/asm/hardirq_32.h
index 4f63ed8df551..4f63ed8df551 100644
--- a/include/asm-sparc/hardirq_32.h
+++ b/arch/sparc/include/asm/hardirq_32.h
diff --git a/include/asm-sparc/hardirq_64.h b/arch/sparc/include/asm/hardirq_64.h
index 7c29fd1a87aa..7c29fd1a87aa 100644
--- a/include/asm-sparc/hardirq_64.h
+++ b/arch/sparc/include/asm/hardirq_64.h
diff --git a/arch/sparc/include/asm/head.h b/arch/sparc/include/asm/head.h
new file mode 100644
index 000000000000..be8f03f3e731
--- /dev/null
+++ b/arch/sparc/include/asm/head.h
@@ -0,0 +1,8 @@
+#ifndef ___ASM_SPARC_HEAD_H
+#define ___ASM_SPARC_HEAD_H
+#if defined(__sparc__) && defined(__arch64__)
+#include <asm/head_64.h>
+#else
+#include <asm/head_32.h>
+#endif
+#endif
diff --git a/include/asm-sparc/head_32.h b/arch/sparc/include/asm/head_32.h
index 7c35491a8b53..7c35491a8b53 100644
--- a/include/asm-sparc/head_32.h
+++ b/arch/sparc/include/asm/head_32.h
diff --git a/include/asm-sparc/head_64.h b/arch/sparc/include/asm/head_64.h
index 10e9dabc4c41..10e9dabc4c41 100644
--- a/include/asm-sparc/head_64.h
+++ b/arch/sparc/include/asm/head_64.h
diff --git a/include/asm-sparc/highmem.h b/arch/sparc/include/asm/highmem.h
index 3de42e776274..3de42e776274 100644
--- a/include/asm-sparc/highmem.h
+++ b/arch/sparc/include/asm/highmem.h
diff --git a/include/asm-sparc/hugetlb.h b/arch/sparc/include/asm/hugetlb.h
index 177061064ee6..177061064ee6 100644
--- a/include/asm-sparc/hugetlb.h
+++ b/arch/sparc/include/asm/hugetlb.h
diff --git a/include/asm-sparc/hvtramp.h b/arch/sparc/include/asm/hvtramp.h
index b2b9b947b3a4..b2b9b947b3a4 100644
--- a/include/asm-sparc/hvtramp.h
+++ b/arch/sparc/include/asm/hvtramp.h
diff --git a/include/asm-sparc/hw_irq.h b/arch/sparc/include/asm/hw_irq.h
index 8d30a7694be2..8d30a7694be2 100644
--- a/include/asm-sparc/hw_irq.h
+++ b/arch/sparc/include/asm/hw_irq.h
diff --git a/include/asm-sparc/hypervisor.h b/arch/sparc/include/asm/hypervisor.h
index 109ae24ba242..109ae24ba242 100644
--- a/include/asm-sparc/hypervisor.h
+++ b/arch/sparc/include/asm/hypervisor.h
diff --git a/include/asm-sparc/ide.h b/arch/sparc/include/asm/ide.h
index b7af3d658239..b7af3d658239 100644
--- a/include/asm-sparc/ide.h
+++ b/arch/sparc/include/asm/ide.h
diff --git a/include/asm-sparc/idprom.h b/arch/sparc/include/asm/idprom.h
index 6976aa2439c6..6976aa2439c6 100644
--- a/include/asm-sparc/idprom.h
+++ b/arch/sparc/include/asm/idprom.h
diff --git a/include/asm-sparc/intr_queue.h b/arch/sparc/include/asm/intr_queue.h
index 206077dedc2a..206077dedc2a 100644
--- a/include/asm-sparc/intr_queue.h
+++ b/arch/sparc/include/asm/intr_queue.h
diff --git a/include/asm-sparc/io-unit.h b/arch/sparc/include/asm/io-unit.h
index 96823b47fd45..96823b47fd45 100644
--- a/include/asm-sparc/io-unit.h
+++ b/arch/sparc/include/asm/io-unit.h
diff --git a/arch/sparc/include/asm/io.h b/arch/sparc/include/asm/io.h
new file mode 100644
index 000000000000..a34b2994937a
--- /dev/null
+++ b/arch/sparc/include/asm/io.h
@@ -0,0 +1,8 @@
+#ifndef ___ASM_SPARC_IO_H
+#define ___ASM_SPARC_IO_H
+#if defined(__sparc__) && defined(__arch64__)
+#include <asm/io_64.h>
+#else
+#include <asm/io_32.h>
+#endif
+#endif
diff --git a/include/asm-sparc/io_32.h b/arch/sparc/include/asm/io_32.h
index 10d7da450070..10d7da450070 100644
--- a/include/asm-sparc/io_32.h
+++ b/arch/sparc/include/asm/io_32.h
diff --git a/include/asm-sparc/io_64.h b/arch/sparc/include/asm/io_64.h
index 0bff078ffdd0..0bff078ffdd0 100644
--- a/include/asm-sparc/io_64.h
+++ b/arch/sparc/include/asm/io_64.h
diff --git a/include/asm-sparc/ioctl.h b/arch/sparc/include/asm/ioctl.h
index 7d6bd51321b9..7d6bd51321b9 100644
--- a/include/asm-sparc/ioctl.h
+++ b/arch/sparc/include/asm/ioctl.h
diff --git a/include/asm-sparc/ioctls.h b/arch/sparc/include/asm/ioctls.h
index 1fe6855c5c18..1fe6855c5c18 100644
--- a/include/asm-sparc/ioctls.h
+++ b/arch/sparc/include/asm/ioctls.h
diff --git a/arch/sparc/include/asm/iommu.h b/arch/sparc/include/asm/iommu.h
new file mode 100644
index 000000000000..e650965b4a8d
--- /dev/null
+++ b/arch/sparc/include/asm/iommu.h
@@ -0,0 +1,8 @@
+#ifndef ___ASM_SPARC_IOMMU_H
+#define ___ASM_SPARC_IOMMU_H
+#if defined(__sparc__) && defined(__arch64__)
+#include <asm/iommu_64.h>
+#else
+#include <asm/iommu_32.h>
+#endif
+#endif
diff --git a/include/asm-sparc/iommu_32.h b/arch/sparc/include/asm/iommu_32.h
index 70c589c05a10..70c589c05a10 100644
--- a/include/asm-sparc/iommu_32.h
+++ b/arch/sparc/include/asm/iommu_32.h
diff --git a/include/asm-sparc/iommu_64.h b/arch/sparc/include/asm/iommu_64.h
index d7b9afcba08b..d7b9afcba08b 100644
--- a/include/asm-sparc/iommu_64.h
+++ b/arch/sparc/include/asm/iommu_64.h
diff --git a/arch/sparc/include/asm/ipcbuf.h b/arch/sparc/include/asm/ipcbuf.h
new file mode 100644
index 000000000000..17d6ef7b23a4
--- /dev/null
+++ b/arch/sparc/include/asm/ipcbuf.h
@@ -0,0 +1,8 @@
+#ifndef ___ASM_SPARC_IPCBUF_H
+#define ___ASM_SPARC_IPCBUF_H
+#if defined(__sparc__) && defined(__arch64__)
+#include <asm/ipcbuf_64.h>
+#else
+#include <asm/ipcbuf_32.h>
+#endif
+#endif
diff --git a/include/asm-sparc/ipcbuf_32.h b/arch/sparc/include/asm/ipcbuf_32.h
index 6387209518f2..6387209518f2 100644
--- a/include/asm-sparc/ipcbuf_32.h
+++ b/arch/sparc/include/asm/ipcbuf_32.h
diff --git a/include/asm-sparc/ipcbuf_64.h b/arch/sparc/include/asm/ipcbuf_64.h
index a44b855b98db..a44b855b98db 100644
--- a/include/asm-sparc/ipcbuf_64.h
+++ b/arch/sparc/include/asm/ipcbuf_64.h
diff --git a/arch/sparc/include/asm/irq.h b/arch/sparc/include/asm/irq.h
new file mode 100644
index 000000000000..3b44a6a14074
--- /dev/null
+++ b/arch/sparc/include/asm/irq.h
@@ -0,0 +1,8 @@
+#ifndef ___ASM_SPARC_IRQ_H
+#define ___ASM_SPARC_IRQ_H
+#if defined(__sparc__) && defined(__arch64__)
+#include <asm/irq_64.h>
+#else
+#include <asm/irq_32.h>
+#endif
+#endif
diff --git a/include/asm-sparc/irq_32.h b/arch/sparc/include/asm/irq_32.h
index fe205cc444b8..fe205cc444b8 100644
--- a/include/asm-sparc/irq_32.h
+++ b/arch/sparc/include/asm/irq_32.h
diff --git a/include/asm-sparc/irq_64.h b/arch/sparc/include/asm/irq_64.h
index 0bb9bf531745..e3dd9303643d 100644
--- a/include/asm-sparc/irq_64.h
+++ b/arch/sparc/include/asm/irq_64.h
@@ -90,4 +90,11 @@ static inline unsigned long get_softint(void)
 	return retval;
 }
 
+void __trigger_all_cpu_backtrace(void);
+#define trigger_all_cpu_backtrace() __trigger_all_cpu_backtrace()
+
+extern void *hardirq_stack[NR_CPUS];
+extern void *softirq_stack[NR_CPUS];
+#define __ARCH_HAS_DO_SOFTIRQ
+
 #endif
diff --git a/include/asm-sparc/irq_regs.h b/arch/sparc/include/asm/irq_regs.h
index 3dd9c0b70270..3dd9c0b70270 100644
--- a/include/asm-sparc/irq_regs.h
+++ b/arch/sparc/include/asm/irq_regs.h
diff --git a/arch/sparc/include/asm/irqflags.h b/arch/sparc/include/asm/irqflags.h
new file mode 100644
index 000000000000..1e138632bd3f
--- /dev/null
+++ b/arch/sparc/include/asm/irqflags.h
@@ -0,0 +1,8 @@
+#ifndef ___ASM_SPARC_IRQFLAGS_H
+#define ___ASM_SPARC_IRQFLAGS_H
+#if defined(__sparc__) && defined(__arch64__)
+#include <asm/irqflags_64.h>
+#else
+#include <asm/irqflags_32.h>
+#endif
+#endif
diff --git a/include/asm-sparc/irqflags_32.h b/arch/sparc/include/asm/irqflags_32.h
index db398fb32826..0fca9d97d44f 100644
--- a/include/asm-sparc/irqflags_32.h
+++ b/arch/sparc/include/asm/irqflags_32.h
@@ -1,5 +1,5 @@
 /*
- * include/asm-sparc/irqflags.h
+ * include/asm/irqflags.h
  *
  * IRQ flags handling
  *
diff --git a/arch/sparc/include/asm/irqflags_64.h b/arch/sparc/include/asm/irqflags_64.h
new file mode 100644
index 000000000000..bb42e59162aa
--- /dev/null
+++ b/arch/sparc/include/asm/irqflags_64.h
@@ -0,0 +1,89 @@
+/*
+ * include/asm/irqflags.h
+ *
+ * IRQ flags handling
+ *
+ * This file gets included from lowlevel asm headers too, to provide
+ * wrapped versions of the local_irq_*() APIs, based on the
+ * raw_local_irq_*() functions from the lowlevel headers.
+ */
+#ifndef _ASM_IRQFLAGS_H
+#define _ASM_IRQFLAGS_H
+
+#ifndef __ASSEMBLY__
+
+static inline unsigned long __raw_local_save_flags(void)
+{
+	unsigned long flags;
+
+	__asm__ __volatile__(
+		"rdpr	%%pil, %0"
+		: "=r" (flags)
+	);
+
+	return flags;
+}
+
+#define raw_local_save_flags(flags) \
+		do { (flags) = __raw_local_save_flags(); } while (0)
+
+static inline void raw_local_irq_restore(unsigned long flags)
+{
+	__asm__ __volatile__(
+		"wrpr	%0, %%pil"
+		: /* no output */
+		: "r" (flags)
+		: "memory"
+	);
+}
+
+static inline void raw_local_irq_disable(void)
+{
+	__asm__ __volatile__(
+		"wrpr	15, %%pil"
+		: /* no outputs */
+		: /* no inputs */
+		: "memory"
+	);
+}
+
+static inline void raw_local_irq_enable(void)
+{
+	__asm__ __volatile__(
+		"wrpr	0, %%pil"
+		: /* no outputs */
+		: /* no inputs */
+		: "memory"
+	);
+}
+
+static inline int raw_irqs_disabled_flags(unsigned long flags)
+{
+	return (flags > 0);
+}
+
+static inline int raw_irqs_disabled(void)
+{
+	unsigned long flags = __raw_local_save_flags();
+
+	return raw_irqs_disabled_flags(flags);
+}
+
+/*
+ * For spinlocks, etc:
+ */
+static inline unsigned long __raw_local_irq_save(void)
+{
+	unsigned long flags = __raw_local_save_flags();
+
+	raw_local_irq_disable();
+
+	return flags;
+}
+
+#define raw_local_irq_save(flags) \
+		do { (flags) = __raw_local_irq_save(); } while (0)
+
+#endif /* (__ASSEMBLY__) */
+
+#endif /* !(_ASM_IRQFLAGS_H) */
diff --git a/include/asm-sparc/jsflash.h b/arch/sparc/include/asm/jsflash.h
index 3457f29bd73b..3457f29bd73b 100644
--- a/include/asm-sparc/jsflash.h
+++ b/arch/sparc/include/asm/jsflash.h
diff --git a/arch/sparc/include/asm/kdebug.h b/arch/sparc/include/asm/kdebug.h
new file mode 100644
index 000000000000..8d12581ca386
--- /dev/null
+++ b/arch/sparc/include/asm/kdebug.h
@@ -0,0 +1,8 @@
+#ifndef ___ASM_SPARC_KDEBUG_H
+#define ___ASM_SPARC_KDEBUG_H
+#if defined(__sparc__) && defined(__arch64__)
+#include <asm/kdebug_64.h>
+#else
+#include <asm/kdebug_32.h>
+#endif
+#endif
diff --git a/include/asm-sparc/kdebug_32.h b/arch/sparc/include/asm/kdebug_32.h
index f69fe7d84b3c..f69fe7d84b3c 100644
--- a/include/asm-sparc/kdebug_32.h
+++ b/arch/sparc/include/asm/kdebug_32.h
diff --git a/include/asm-sparc/kdebug_64.h b/arch/sparc/include/asm/kdebug_64.h
index f905b773235a..f905b773235a 100644
--- a/include/asm-sparc/kdebug_64.h
+++ b/arch/sparc/include/asm/kdebug_64.h
diff --git a/include/asm-sparc/kgdb.h b/arch/sparc/include/asm/kgdb.h
index b6ef301d05bf..b6ef301d05bf 100644
--- a/include/asm-sparc/kgdb.h
+++ b/arch/sparc/include/asm/kgdb.h
diff --git a/include/asm-sparc/kmap_types.h b/arch/sparc/include/asm/kmap_types.h
index 602f5e034f7a..602f5e034f7a 100644
--- a/include/asm-sparc/kmap_types.h
+++ b/arch/sparc/include/asm/kmap_types.h
diff --git a/include/asm-sparc/kprobes.h b/arch/sparc/include/asm/kprobes.h
index 5879d71afdaa..5879d71afdaa 100644
--- a/include/asm-sparc/kprobes.h
+++ b/arch/sparc/include/asm/kprobes.h
diff --git a/include/asm-sparc/ldc.h b/arch/sparc/include/asm/ldc.h
index bdb524a7b814..bdb524a7b814 100644
--- a/include/asm-sparc/ldc.h
+++ b/arch/sparc/include/asm/ldc.h
diff --git a/include/asm-sparc/linkage.h b/arch/sparc/include/asm/linkage.h
index 291c2d01c44f..291c2d01c44f 100644
--- a/include/asm-sparc/linkage.h
+++ b/arch/sparc/include/asm/linkage.h
diff --git a/include/asm-sparc/lmb.h b/arch/sparc/include/asm/lmb.h
index 6a352cbcf520..6a352cbcf520 100644
--- a/include/asm-sparc/lmb.h
+++ b/arch/sparc/include/asm/lmb.h
diff --git a/include/asm-sparc/local.h b/arch/sparc/include/asm/local.h
index bc80815a435c..bc80815a435c 100644
--- a/include/asm-sparc/local.h
+++ b/arch/sparc/include/asm/local.h
diff --git a/include/asm-sparc/lsu.h b/arch/sparc/include/asm/lsu.h
index 7190f8de90a0..7190f8de90a0 100644
--- a/include/asm-sparc/lsu.h
+++ b/arch/sparc/include/asm/lsu.h
diff --git a/include/asm-sparc/machines.h b/arch/sparc/include/asm/machines.h
index c28c2f248794..c28c2f248794 100644
--- a/include/asm-sparc/machines.h
+++ b/arch/sparc/include/asm/machines.h
diff --git a/include/asm-sparc/mbus.h b/arch/sparc/include/asm/mbus.h
index 69f07a022ee6..69f07a022ee6 100644
--- a/include/asm-sparc/mbus.h
+++ b/arch/sparc/include/asm/mbus.h
diff --git a/arch/sparc/include/asm/mc146818rtc.h b/arch/sparc/include/asm/mc146818rtc.h
new file mode 100644
index 000000000000..67ed9e3a0235
--- /dev/null
+++ b/arch/sparc/include/asm/mc146818rtc.h
@@ -0,0 +1,8 @@
+#ifndef ___ASM_SPARC_MC146818RTC_H
+#define ___ASM_SPARC_MC146818RTC_H
+#if defined(__sparc__) && defined(__arch64__)
+#include <asm/mc146818rtc_64.h>
+#else
+#include <asm/mc146818rtc_32.h>
+#endif
+#endif
diff --git a/include/asm-sparc/mc146818rtc_32.h b/arch/sparc/include/asm/mc146818rtc_32.h
index fa7eac926582..fa7eac926582 100644
--- a/include/asm-sparc/mc146818rtc_32.h
+++ b/arch/sparc/include/asm/mc146818rtc_32.h
diff --git a/include/asm-sparc/mc146818rtc_64.h b/arch/sparc/include/asm/mc146818rtc_64.h
index e9c0fcc25c6f..e9c0fcc25c6f 100644
--- a/include/asm-sparc/mc146818rtc_64.h
+++ b/arch/sparc/include/asm/mc146818rtc_64.h
diff --git a/include/asm-sparc/mdesc.h b/arch/sparc/include/asm/mdesc.h
index 1acc7272e537..1acc7272e537 100644
--- a/include/asm-sparc/mdesc.h
+++ b/arch/sparc/include/asm/mdesc.h
diff --git a/include/asm-sparc/memreg.h b/arch/sparc/include/asm/memreg.h
index 845ad2b39183..845ad2b39183 100644
--- a/include/asm-sparc/memreg.h
+++ b/arch/sparc/include/asm/memreg.h
diff --git a/include/asm-sparc/mman.h b/arch/sparc/include/asm/mman.h
index fdfbbf0a4736..fdfbbf0a4736 100644
--- a/include/asm-sparc/mman.h
+++ b/arch/sparc/include/asm/mman.h
diff --git a/arch/sparc/include/asm/mmu.h b/arch/sparc/include/asm/mmu.h
new file mode 100644
index 000000000000..88fa313887db
--- /dev/null
+++ b/arch/sparc/include/asm/mmu.h
@@ -0,0 +1,8 @@
+#ifndef ___ASM_SPARC_MMU_H
+#define ___ASM_SPARC_MMU_H
+#if defined(__sparc__) && defined(__arch64__)
+#include <asm/mmu_64.h>
+#else
+#include <asm/mmu_32.h>
+#endif
+#endif
diff --git a/include/asm-sparc/mmu_32.h b/arch/sparc/include/asm/mmu_32.h
index ccd36d26615a..ccd36d26615a 100644
--- a/include/asm-sparc/mmu_32.h
+++ b/arch/sparc/include/asm/mmu_32.h
diff --git a/include/asm-sparc/mmu_64.h b/arch/sparc/include/asm/mmu_64.h
index 9067dc500535..9067dc500535 100644
--- a/include/asm-sparc/mmu_64.h
+++ b/arch/sparc/include/asm/mmu_64.h
diff --git a/arch/sparc/include/asm/mmu_context.h b/arch/sparc/include/asm/mmu_context.h
new file mode 100644
index 000000000000..5531346c64f9
--- /dev/null
+++ b/arch/sparc/include/asm/mmu_context.h
@@ -0,0 +1,8 @@
+#ifndef ___ASM_SPARC_MMU_CONTEXT_H
+#define ___ASM_SPARC_MMU_CONTEXT_H
+#if defined(__sparc__) && defined(__arch64__)
+#include <asm/mmu_context_64.h>
+#else
+#include <asm/mmu_context_32.h>
+#endif
+#endif
diff --git a/include/asm-sparc/mmu_context_32.h b/arch/sparc/include/asm/mmu_context_32.h
index 671a997b9e69..671a997b9e69 100644
--- a/include/asm-sparc/mmu_context_32.h
+++ b/arch/sparc/include/asm/mmu_context_32.h
diff --git a/include/asm-sparc/mmu_context_64.h b/arch/sparc/include/asm/mmu_context_64.h
index 5693ab482606..5693ab482606 100644
--- a/include/asm-sparc/mmu_context_64.h
+++ b/arch/sparc/include/asm/mmu_context_64.h
diff --git a/include/asm-sparc/mmzone.h b/arch/sparc/include/asm/mmzone.h
index ebf5986c12ed..ebf5986c12ed 100644
--- a/include/asm-sparc/mmzone.h
+++ b/arch/sparc/include/asm/mmzone.h
diff --git a/arch/sparc/include/asm/module.h b/arch/sparc/include/asm/module.h
new file mode 100644
index 000000000000..e82cf9a3e60e
--- /dev/null
+++ b/arch/sparc/include/asm/module.h
@@ -0,0 +1,8 @@
+#ifndef ___ASM_SPARC_MODULE_H
+#define ___ASM_SPARC_MODULE_H
+#if defined(__sparc__) && defined(__arch64__)
+#include <asm/module_64.h>
+#else
+#include <asm/module_32.h>
+#endif
+#endif
diff --git a/include/asm-sparc/module_32.h b/arch/sparc/include/asm/module_32.h
index cbd9e67b0c0b..cbd9e67b0c0b 100644
--- a/include/asm-sparc/module_32.h
+++ b/arch/sparc/include/asm/module_32.h
diff --git a/include/asm-sparc/module_64.h b/arch/sparc/include/asm/module_64.h
index 3d77ba465783..3d77ba465783 100644
--- a/include/asm-sparc/module_64.h
+++ b/arch/sparc/include/asm/module_64.h
diff --git a/arch/sparc/include/asm/mostek.h b/arch/sparc/include/asm/mostek.h
new file mode 100644
index 000000000000..433be3e0a69b
--- /dev/null
+++ b/arch/sparc/include/asm/mostek.h
@@ -0,0 +1,8 @@
+#ifndef ___ASM_SPARC_MOSTEK_H
+#define ___ASM_SPARC_MOSTEK_H
+#if defined(__sparc__) && defined(__arch64__)
+#include <asm/mostek_64.h>
+#else
+#include <asm/mostek_32.h>
+#endif
+#endif
diff --git a/include/asm-sparc/mostek_32.h b/arch/sparc/include/asm/mostek_32.h
index a99590c4c507..a99590c4c507 100644
--- a/include/asm-sparc/mostek_32.h
+++ b/arch/sparc/include/asm/mostek_32.h
diff --git a/include/asm-sparc/mostek_64.h b/arch/sparc/include/asm/mostek_64.h
index c5652de2ace2..c5652de2ace2 100644
--- a/include/asm-sparc/mostek_64.h
+++ b/arch/sparc/include/asm/mostek_64.h
diff --git a/include/asm-sparc/mpmbox.h b/arch/sparc/include/asm/mpmbox.h
index f8423039b242..f8423039b242 100644
--- a/include/asm-sparc/mpmbox.h
+++ b/arch/sparc/include/asm/mpmbox.h
diff --git a/include/asm-sparc/msgbuf.h b/arch/sparc/include/asm/msgbuf.h
index efc7cbe9788f..efc7cbe9788f 100644
--- a/include/asm-sparc/msgbuf.h
+++ b/arch/sparc/include/asm/msgbuf.h
diff --git a/include/asm-sparc/msi.h b/arch/sparc/include/asm/msi.h
index 724ca5667052..724ca5667052 100644
--- a/include/asm-sparc/msi.h
+++ b/arch/sparc/include/asm/msi.h
diff --git a/include/asm-sparc/mutex.h b/arch/sparc/include/asm/mutex.h
index 458c1f7fbc18..458c1f7fbc18 100644
--- a/include/asm-sparc/mutex.h
+++ b/arch/sparc/include/asm/mutex.h
diff --git a/include/asm-sparc/mxcc.h b/arch/sparc/include/asm/mxcc.h
index c0517bd05bde..c0517bd05bde 100644
--- a/include/asm-sparc/mxcc.h
+++ b/arch/sparc/include/asm/mxcc.h
diff --git a/include/asm-sparc/ns87303.h b/arch/sparc/include/asm/ns87303.h
index 686defe6aaa0..686defe6aaa0 100644
--- a/include/asm-sparc/ns87303.h
+++ b/arch/sparc/include/asm/ns87303.h
diff --git a/include/asm-sparc/obio.h b/arch/sparc/include/asm/obio.h
index 1a7544ceb574..1a7544ceb574 100644
--- a/include/asm-sparc/obio.h
+++ b/arch/sparc/include/asm/obio.h
diff --git a/arch/sparc/include/asm/of_device.h b/arch/sparc/include/asm/of_device.h
new file mode 100644
index 000000000000..bba777a416d3
--- /dev/null
+++ b/arch/sparc/include/asm/of_device.h
@@ -0,0 +1,37 @@
+#ifndef _ASM_SPARC_OF_DEVICE_H
+#define _ASM_SPARC_OF_DEVICE_H
+#ifdef __KERNEL__
+
+#include <linux/device.h>
+#include <linux/of.h>
+#include <linux/mod_devicetable.h>
+#include <asm/openprom.h>
+
+/*
+ * The of_device is a kind of "base class" that is a superset of
+ * struct device for use by devices attached to an OF node and
+ * probed using OF properties.
+ */
+struct of_device
+{
+	struct device_node		*node;
+	struct device			dev;
+	struct resource			resource[PROMREG_MAX];
+	unsigned int			irqs[PROMINTR_MAX];
+	int				num_irqs;
+
+	void				*sysdata;
+
+	int				slot;
+	int				portid;
+	int				clock_freq;
+};
+
+extern void __iomem *of_ioremap(struct resource *res, unsigned long offset, unsigned long size, char *name);
+extern void of_iounmap(struct resource *res, void __iomem *base, unsigned long size);
+
+/* This is just here during the transition */
+#include <linux/of_platform.h>
+
+#endif /* __KERNEL__ */
+#endif /* _ASM_SPARC_OF_DEVICE_H */
diff --git a/arch/sparc/include/asm/of_platform.h b/arch/sparc/include/asm/of_platform.h
new file mode 100644
index 000000000000..2348ab90a57c
--- /dev/null
+++ b/arch/sparc/include/asm/of_platform.h
@@ -0,0 +1,21 @@
+#ifndef ___ASM_SPARC_OF_PLATFORM_H
+#define ___ASM_SPARC_OF_PLATFORM_H
+/*
+ *    Copyright (C) 2006 Benjamin Herrenschmidt, IBM Corp.
+ *			 <benh@kernel.crashing.org>
+ *    Modified for Sparc by merging parts of asm/of_device.h
+ *		by Stephen Rothwell
+ *
+ *  This program is free software; you can redistribute it and/or
+ *  modify it under the terms of the GNU General Public License
+ *  as published by the Free Software Foundation; either version
+ *  2 of the License, or (at your option) any later version.
+ *
+ */
+
+extern struct bus_type ebus_bus_type;
+extern struct bus_type sbus_bus_type;
+
+#define of_bus_type	of_platform_bus_type	/* for compatibility */
+
+#endif
diff --git a/arch/sparc/include/asm/openprom.h b/arch/sparc/include/asm/openprom.h
new file mode 100644
index 000000000000..aaeae905ed3f
--- /dev/null
+++ b/arch/sparc/include/asm/openprom.h
@@ -0,0 +1,8 @@
+#ifndef ___ASM_SPARC_OPENPROM_H
+#define ___ASM_SPARC_OPENPROM_H
+#if defined(__sparc__) && defined(__arch64__)
+#include <asm/openprom_64.h>
+#else
+#include <asm/openprom_32.h>
+#endif
+#endif
diff --git a/include/asm-sparc/openprom_32.h b/arch/sparc/include/asm/openprom_32.h
index 8b1649f29ed9..8b1649f29ed9 100644
--- a/include/asm-sparc/openprom_32.h
+++ b/arch/sparc/include/asm/openprom_32.h
diff --git a/include/asm-sparc/openprom_64.h b/arch/sparc/include/asm/openprom_64.h
index b69e4a8c9170..b69e4a8c9170 100644
--- a/include/asm-sparc/openprom_64.h
+++ b/arch/sparc/include/asm/openprom_64.h
diff --git a/include/asm-sparc/openpromio.h b/arch/sparc/include/asm/openpromio.h
index 917fb8e9c633..917fb8e9c633 100644
--- a/include/asm-sparc/openpromio.h
+++ b/arch/sparc/include/asm/openpromio.h
diff --git a/arch/sparc/include/asm/oplib.h b/arch/sparc/include/asm/oplib.h
new file mode 100644
index 000000000000..72e04e13a6b4
--- /dev/null
+++ b/arch/sparc/include/asm/oplib.h
@@ -0,0 +1,8 @@
+#ifndef ___ASM_SPARC_OPLIB_H
+#define ___ASM_SPARC_OPLIB_H
+#if defined(__sparc__) && defined(__arch64__)
+#include <asm/oplib_64.h>
+#else
+#include <asm/oplib_32.h>
+#endif
+#endif
diff --git a/include/asm-sparc/oplib_32.h b/arch/sparc/include/asm/oplib_32.h
index b2631da259e0..b2631da259e0 100644
--- a/include/asm-sparc/oplib_32.h
+++ b/arch/sparc/include/asm/oplib_32.h
diff --git a/include/asm-sparc/oplib_64.h b/arch/sparc/include/asm/oplib_64.h
index 6d2c2ca98039..6d2c2ca98039 100644
--- a/include/asm-sparc/oplib_64.h
+++ b/arch/sparc/include/asm/oplib_64.h
diff --git a/arch/sparc/include/asm/page.h b/arch/sparc/include/asm/page.h
new file mode 100644
index 000000000000..f21de0349025
--- /dev/null
+++ b/arch/sparc/include/asm/page.h
@@ -0,0 +1,8 @@
+#ifndef ___ASM_SPARC_PAGE_H
+#define ___ASM_SPARC_PAGE_H
+#if defined(__sparc__) && defined(__arch64__)
+#include <asm/page_64.h>
+#else
+#include <asm/page_32.h>
+#endif
+#endif
diff --git a/include/asm-sparc/page_32.h b/arch/sparc/include/asm/page_32.h
index cf5fb70ca1c1..cf5fb70ca1c1 100644
--- a/include/asm-sparc/page_32.h
+++ b/arch/sparc/include/asm/page_32.h
diff --git a/include/asm-sparc/page_64.h b/arch/sparc/include/asm/page_64.h
index b579b910ef51..b579b910ef51 100644
--- a/include/asm-sparc/page_64.h
+++ b/arch/sparc/include/asm/page_64.h
diff --git a/include/asm-sparc/param.h b/arch/sparc/include/asm/param.h
index 9836d9a3cb9a..9836d9a3cb9a 100644
--- a/include/asm-sparc/param.h
+++ b/arch/sparc/include/asm/param.h
diff --git a/arch/sparc/include/asm/parport.h b/arch/sparc/include/asm/parport.h
new file mode 100644
index 000000000000..d9830621c906
--- /dev/null
+++ b/arch/sparc/include/asm/parport.h
@@ -0,0 +1,247 @@
+/* parport.h: sparc64 specific parport initialization and dma.
+ *
+ * Copyright (C) 1999  Eddie C. Dost  (ecd@skynet.be)
+ */
+
+#ifndef _ASM_SPARC64_PARPORT_H
+#define _ASM_SPARC64_PARPORT_H 1
+
+#include <linux/of_device.h>
+
+#include <asm/ebus.h>
+#include <asm/ns87303.h>
+#include <asm/prom.h>
+
+#define PARPORT_PC_MAX_PORTS	PARPORT_MAX
+
+/*
+ * While sparc64 doesn't have an ISA DMA API, we provide something that looks
+ * close enough to make parport_pc happy
+ */
+#define HAS_DMA
+
+static DEFINE_SPINLOCK(dma_spin_lock);
+
+#define claim_dma_lock() \
+({	unsigned long flags; \
+	spin_lock_irqsave(&dma_spin_lock, flags); \
+	flags; \
+})
+
+#define release_dma_lock(__flags) \
+	spin_unlock_irqrestore(&dma_spin_lock, __flags);
+
+static struct sparc_ebus_info {
+	struct ebus_dma_info info;
+	unsigned int addr;
+	unsigned int count;
+	int lock;
+
+	struct parport *port;
+} sparc_ebus_dmas[PARPORT_PC_MAX_PORTS];
+
+static DECLARE_BITMAP(dma_slot_map, PARPORT_PC_MAX_PORTS);
+
+static inline int request_dma(unsigned int dmanr, const char *device_id)
+{
+	if (dmanr >= PARPORT_PC_MAX_PORTS)
+		return -EINVAL;
+	if (xchg(&sparc_ebus_dmas[dmanr].lock, 1) != 0)
+		return -EBUSY;
+	return 0;
+}
+
+static inline void free_dma(unsigned int dmanr)
+{
+	if (dmanr >= PARPORT_PC_MAX_PORTS) {
+		printk(KERN_WARNING "Trying to free DMA%d\n", dmanr);
+		return;
+	}
+	if (xchg(&sparc_ebus_dmas[dmanr].lock, 0) == 0) {
+		printk(KERN_WARNING "Trying to free free DMA%d\n", dmanr);
+		return;
+	}
+}
+
+static inline void enable_dma(unsigned int dmanr)
+{
+	ebus_dma_enable(&sparc_ebus_dmas[dmanr].info, 1);
+
+	if (ebus_dma_request(&sparc_ebus_dmas[dmanr].info,
+			     sparc_ebus_dmas[dmanr].addr,
+			     sparc_ebus_dmas[dmanr].count))
+		BUG();
+}
+
+static inline void disable_dma(unsigned int dmanr)
+{
+	ebus_dma_enable(&sparc_ebus_dmas[dmanr].info, 0);
+}
+
+static inline void clear_dma_ff(unsigned int dmanr)
+{
+	/* nothing */
+}
+
+static inline void set_dma_mode(unsigned int dmanr, char mode)
+{
+	ebus_dma_prepare(&sparc_ebus_dmas[dmanr].info, (mode != DMA_MODE_WRITE));
+}
+
+static inline void set_dma_addr(unsigned int dmanr, unsigned int addr)
+{
+	sparc_ebus_dmas[dmanr].addr = addr;
+}
+
+static inline void set_dma_count(unsigned int dmanr, unsigned int count)
+{
+	sparc_ebus_dmas[dmanr].count = count;
+}
+
+static inline unsigned int get_dma_residue(unsigned int dmanr)
+{
+	return ebus_dma_residue(&sparc_ebus_dmas[dmanr].info);
+}
+
+static int __devinit ecpp_probe(struct of_device *op, const struct of_device_id *match)
+{
+	unsigned long base = op->resource[0].start;
+	unsigned long config = op->resource[1].start;
+	unsigned long d_base = op->resource[2].start;
+	unsigned long d_len;
+	struct device_node *parent;
+	struct parport *p;
+	int slot, err;
+
+	parent = op->node->parent;
+	if (!strcmp(parent->name, "dma")) {
+		p = parport_pc_probe_port(base, base + 0x400,
+					  op->irqs[0], PARPORT_DMA_NOFIFO,
+					  op->dev.parent->parent);
+		if (!p)
+			return -ENOMEM;
+		dev_set_drvdata(&op->dev, p);
+		return 0;
+	}
+
+	for (slot = 0; slot < PARPORT_PC_MAX_PORTS; slot++) {
+		if (!test_and_set_bit(slot, dma_slot_map))
+			break;
+	}
+	err = -ENODEV;
+	if (slot >= PARPORT_PC_MAX_PORTS)
+		goto out_err;
+
+	spin_lock_init(&sparc_ebus_dmas[slot].info.lock);
+
+	d_len = (op->resource[2].end - d_base) + 1UL;
+	sparc_ebus_dmas[slot].info.regs =
+		of_ioremap(&op->resource[2], 0, d_len, "ECPP DMA");
+
+	if (!sparc_ebus_dmas[slot].info.regs)
+		goto out_clear_map;
+
+	sparc_ebus_dmas[slot].info.flags = 0;
+	sparc_ebus_dmas[slot].info.callback = NULL;
+	sparc_ebus_dmas[slot].info.client_cookie = NULL;
+	sparc_ebus_dmas[slot].info.irq = 0xdeadbeef;
+	strcpy(sparc_ebus_dmas[slot].info.name, "parport");
+	if (ebus_dma_register(&sparc_ebus_dmas[slot].info))
+		goto out_unmap_regs;
+
+	ebus_dma_irq_enable(&sparc_ebus_dmas[slot].info, 1);
+
+	/* Configure IRQ to Push Pull, Level Low */
+	/* Enable ECP, set bit 2 of the CTR first */
+	outb(0x04, base + 0x02);
+	ns87303_modify(config, PCR,
+		       PCR_EPP_ENABLE |
+		       PCR_IRQ_ODRAIN,
+		       PCR_ECP_ENABLE |
+		       PCR_ECP_CLK_ENA |
+		       PCR_IRQ_POLAR);
+
+	/* CTR bit 5 controls direction of port */
+	ns87303_modify(config, PTR,
+		       0, PTR_LPT_REG_DIR);
+
+	p = parport_pc_probe_port(base, base + 0x400,
+				  op->irqs[0],
+				  slot,
+				  op->dev.parent);
+	err = -ENOMEM;
+	if (!p)
+		goto out_disable_irq;
+
+	dev_set_drvdata(&op->dev, p);
+
+	return 0;
+
+out_disable_irq:
+	ebus_dma_irq_enable(&sparc_ebus_dmas[slot].info, 0);
+	ebus_dma_unregister(&sparc_ebus_dmas[slot].info);
+
+out_unmap_regs:
+	of_iounmap(&op->resource[2], sparc_ebus_dmas[slot].info.regs, d_len);
+
+out_clear_map:
+	clear_bit(slot, dma_slot_map);
+
+out_err:
+	return err;
+}
+
+static int __devexit ecpp_remove(struct of_device *op)
+{
+	struct parport *p = dev_get_drvdata(&op->dev);
+	int slot = p->dma;
+
+	parport_pc_unregister_port(p);
+
+	if (slot != PARPORT_DMA_NOFIFO) {
+		unsigned long d_base = op->resource[2].start;
+		unsigned long d_len;
+
+		d_len = (op->resource[2].end - d_base) + 1UL;
+
+		ebus_dma_irq_enable(&sparc_ebus_dmas[slot].info, 0);
+		ebus_dma_unregister(&sparc_ebus_dmas[slot].info);
+		of_iounmap(&op->resource[2],
+			   sparc_ebus_dmas[slot].info.regs,
+			   d_len);
+		clear_bit(slot, dma_slot_map);
+	}
+
+	return 0;
+}
+
+static struct of_device_id ecpp_match[] = {
+	{
+		.name = "ecpp",
+	},
+	{
+		.name = "parallel",
+		.compatible = "ecpp",
+	},
+	{
+		.name = "parallel",
+		.compatible = "ns87317-ecpp",
+	},
+	{},
+};
+
+static struct of_platform_driver ecpp_driver = {
+	.name			= "ecpp",
+	.match_table		= ecpp_match,
+	.probe			= ecpp_probe,
+	.remove			= __devexit_p(ecpp_remove),
+};
+
+static int parport_pc_find_nonpci_ports(int autoirq, int autodma)
+{
+	of_register_driver(&ecpp_driver, &of_bus_type);
+
+	return 0;
+}
+
+#endif /* !(_ASM_SPARC64_PARPORT_H */
diff --git a/include/asm-sparc/pbm.h b/arch/sparc/include/asm/pbm.h
index 458a4916d14d..458a4916d14d 100644
--- a/include/asm-sparc/pbm.h
+++ b/arch/sparc/include/asm/pbm.h
diff --git a/arch/sparc/include/asm/pci.h b/arch/sparc/include/asm/pci.h
new file mode 100644
index 000000000000..6e14fd179335
--- /dev/null
+++ b/arch/sparc/include/asm/pci.h
@@ -0,0 +1,8 @@
+#ifndef ___ASM_SPARC_PCI_H
+#define ___ASM_SPARC_PCI_H
+#if defined(__sparc__) && defined(__arch64__)
+#include <asm/pci_64.h>
+#else
+#include <asm/pci_32.h>
+#endif
+#endif
diff --git a/include/asm-sparc/pci_32.h b/arch/sparc/include/asm/pci_32.h
index b93b6c79e08f..0ee949d220c0 100644
--- a/include/asm-sparc/pci_32.h
+++ b/arch/sparc/include/asm/pci_32.h
@@ -154,7 +154,8 @@ static inline void pci_dma_burst_advice(struct pci_dev *pdev,
 
 #define PCI_DMA_ERROR_CODE      (~(dma_addr_t)0x0)
 
-static inline int pci_dma_mapping_error(dma_addr_t dma_addr)
+static inline int pci_dma_mapping_error(struct pci_dev *pdev,
+					dma_addr_t dma_addr)
 {
         return (dma_addr == PCI_DMA_ERROR_CODE);
 }
diff --git a/include/asm-sparc/pci_64.h b/arch/sparc/include/asm/pci_64.h
index f59f2571295b..4f79a54948f6 100644
--- a/include/asm-sparc/pci_64.h
+++ b/arch/sparc/include/asm/pci_64.h
@@ -140,9 +140,10 @@ extern int pci_dma_supported(struct pci_dev *hwdev, u64 mask);
 #define PCI64_REQUIRED_MASK	(~(dma64_addr_t)0)
 #define PCI64_ADDR_BASE		0xfffc000000000000UL
 
-static inline int pci_dma_mapping_error(dma_addr_t dma_addr)
+static inline int pci_dma_mapping_error(struct pci_dev *pdev,
+					dma_addr_t dma_addr)
 {
-	return dma_mapping_error(dma_addr);
+	return dma_mapping_error(&pdev->dev, dma_addr);
 }
 
 #ifdef CONFIG_PCI
diff --git a/include/asm-sparc/pcic.h b/arch/sparc/include/asm/pcic.h
index f20ef562b265..f20ef562b265 100644
--- a/include/asm-sparc/pcic.h
+++ b/arch/sparc/include/asm/pcic.h
diff --git a/arch/sparc/include/asm/percpu.h b/arch/sparc/include/asm/percpu.h
new file mode 100644
index 000000000000..bfb1d19ff1bf
--- /dev/null
+++ b/arch/sparc/include/asm/percpu.h
@@ -0,0 +1,8 @@
+#ifndef ___ASM_SPARC_PERCPU_H
+#define ___ASM_SPARC_PERCPU_H
+#if defined(__sparc__) && defined(__arch64__)
+#include <asm/percpu_64.h>
+#else
+#include <asm/percpu_32.h>
+#endif
+#endif
diff --git a/include/asm-sparc/percpu_32.h b/arch/sparc/include/asm/percpu_32.h
index 06066a7aaec3..06066a7aaec3 100644
--- a/include/asm-sparc/percpu_32.h
+++ b/arch/sparc/include/asm/percpu_32.h
diff --git a/include/asm-sparc/percpu_64.h b/arch/sparc/include/asm/percpu_64.h
index bee64593023e..bee64593023e 100644
--- a/include/asm-sparc/percpu_64.h
+++ b/arch/sparc/include/asm/percpu_64.h
diff --git a/include/asm-sparc/perfctr.h b/arch/sparc/include/asm/perfctr.h
index 836873002b75..836873002b75 100644
--- a/include/asm-sparc/perfctr.h
+++ b/arch/sparc/include/asm/perfctr.h
diff --git a/arch/sparc/include/asm/pgalloc.h b/arch/sparc/include/asm/pgalloc.h
new file mode 100644
index 000000000000..b6db1f7cdcab
--- /dev/null
+++ b/arch/sparc/include/asm/pgalloc.h
@@ -0,0 +1,8 @@
+#ifndef ___ASM_SPARC_PGALLOC_H
+#define ___ASM_SPARC_PGALLOC_H
+#if defined(__sparc__) && defined(__arch64__)
+#include <asm/pgalloc_64.h>
+#else
+#include <asm/pgalloc_32.h>
+#endif
+#endif
diff --git a/include/asm-sparc/pgalloc_32.h b/arch/sparc/include/asm/pgalloc_32.h
index 681582d26969..681582d26969 100644
--- a/include/asm-sparc/pgalloc_32.h
+++ b/arch/sparc/include/asm/pgalloc_32.h
diff --git a/include/asm-sparc/pgalloc_64.h b/arch/sparc/include/asm/pgalloc_64.h
index 5bdfa2c6e400..5bdfa2c6e400 100644
--- a/include/asm-sparc/pgalloc_64.h
+++ b/arch/sparc/include/asm/pgalloc_64.h
diff --git a/arch/sparc/include/asm/pgtable.h b/arch/sparc/include/asm/pgtable.h
new file mode 100644
index 000000000000..59ba6f620732
--- /dev/null
+++ b/arch/sparc/include/asm/pgtable.h
@@ -0,0 +1,8 @@
+#ifndef ___ASM_SPARC_PGTABLE_H
+#define ___ASM_SPARC_PGTABLE_H
+#if defined(__sparc__) && defined(__arch64__)
+#include <asm/pgtable_64.h>
+#else
+#include <asm/pgtable_32.h>
+#endif
+#endif
diff --git a/arch/sparc/include/asm/pgtable_32.h b/arch/sparc/include/asm/pgtable_32.h
new file mode 100644
index 000000000000..08237fda8874
--- /dev/null
+++ b/arch/sparc/include/asm/pgtable_32.h
@@ -0,0 +1,480 @@
+#ifndef _SPARC_PGTABLE_H
+#define _SPARC_PGTABLE_H
+
+/*  asm/pgtable.h:  Defines and functions used to work
+ *                        with Sparc page tables.
+ *
+ *  Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
+ *  Copyright (C) 1998 Jakub Jelinek (jj@sunsite.mff.cuni.cz)
+ */
+
+#ifndef __ASSEMBLY__
+#include <asm-generic/4level-fixup.h>
+
+#include <linux/spinlock.h>
+#include <linux/swap.h>
+#include <asm/types.h>
+#ifdef CONFIG_SUN4
+#include <asm/pgtsun4.h>
+#else
+#include <asm/pgtsun4c.h>
+#endif
+#include <asm/pgtsrmmu.h>
+#include <asm/vac-ops.h>
+#include <asm/oplib.h>
+#include <asm/btfixup.h>
+#include <asm/system.h>
+
+
+struct vm_area_struct;
+struct page;
+
+extern void load_mmu(void);
+extern unsigned long calc_highpages(void);
+
+BTFIXUPDEF_SIMM13(pgdir_shift)
+BTFIXUPDEF_SETHI(pgdir_size)
+BTFIXUPDEF_SETHI(pgdir_mask)
+
+BTFIXUPDEF_SIMM13(ptrs_per_pmd)
+BTFIXUPDEF_SIMM13(ptrs_per_pgd)
+BTFIXUPDEF_SIMM13(user_ptrs_per_pgd)
+
+#define pte_ERROR(e)   __builtin_trap()
+#define pmd_ERROR(e)   __builtin_trap()
+#define pgd_ERROR(e)   __builtin_trap()
+
+BTFIXUPDEF_INT(page_none)
+BTFIXUPDEF_INT(page_copy)
+BTFIXUPDEF_INT(page_readonly)
+BTFIXUPDEF_INT(page_kernel)
+
+#define PMD_SHIFT		SUN4C_PMD_SHIFT
+#define PMD_SIZE        	(1UL << PMD_SHIFT)
+#define PMD_MASK        	(~(PMD_SIZE-1))
+#define PMD_ALIGN(__addr) 	(((__addr) + ~PMD_MASK) & PMD_MASK)
+#define PGDIR_SHIFT     	BTFIXUP_SIMM13(pgdir_shift)
+#define PGDIR_SIZE      	BTFIXUP_SETHI(pgdir_size)
+#define PGDIR_MASK      	BTFIXUP_SETHI(pgdir_mask)
+#define PTRS_PER_PTE    	1024
+#define PTRS_PER_PMD    	BTFIXUP_SIMM13(ptrs_per_pmd)
+#define PTRS_PER_PGD    	BTFIXUP_SIMM13(ptrs_per_pgd)
+#define USER_PTRS_PER_PGD	BTFIXUP_SIMM13(user_ptrs_per_pgd)
+#define FIRST_USER_ADDRESS	0
+#define PTE_SIZE		(PTRS_PER_PTE*4)
+
+#define PAGE_NONE      __pgprot(BTFIXUP_INT(page_none))
+extern pgprot_t PAGE_SHARED;
+#define PAGE_COPY      __pgprot(BTFIXUP_INT(page_copy))
+#define PAGE_READONLY  __pgprot(BTFIXUP_INT(page_readonly))
+
+extern unsigned long page_kernel;
+
+#ifdef MODULE
+#define PAGE_KERNEL	page_kernel
+#else
+#define PAGE_KERNEL    __pgprot(BTFIXUP_INT(page_kernel))
+#endif
+
+/* Top-level page directory */
+extern pgd_t swapper_pg_dir[1024];
+
+extern void paging_init(void);
+
+/* Page table for 0-4MB for everybody, on the Sparc this
+ * holds the same as on the i386.
+ */
+extern pte_t pg0[1024];
+extern pte_t pg1[1024];
+extern pte_t pg2[1024];
+extern pte_t pg3[1024];
+
+extern unsigned long ptr_in_current_pgd;
+
+/* Here is a trick, since mmap.c need the initializer elements for
+ * protection_map[] to be constant at compile time, I set the following
+ * to all zeros.  I set it to the real values after I link in the
+ * appropriate MMU page table routines at boot time.
+ */
+#define __P000  __pgprot(0)
+#define __P001  __pgprot(0)
+#define __P010  __pgprot(0)
+#define __P011  __pgprot(0)
+#define __P100  __pgprot(0)
+#define __P101  __pgprot(0)
+#define __P110  __pgprot(0)
+#define __P111  __pgprot(0)
+
+#define __S000	__pgprot(0)
+#define __S001	__pgprot(0)
+#define __S010	__pgprot(0)
+#define __S011	__pgprot(0)
+#define __S100	__pgprot(0)
+#define __S101	__pgprot(0)
+#define __S110	__pgprot(0)
+#define __S111	__pgprot(0)
+
+extern int num_contexts;
+
+/* First physical page can be anywhere, the following is needed so that
+ * va-->pa and vice versa conversions work properly without performance
+ * hit for all __pa()/__va() operations.
+ */
+extern unsigned long phys_base;
+extern unsigned long pfn_base;
+
+/*
+ * BAD_PAGETABLE is used when we need a bogus page-table, while
+ * BAD_PAGE is used for a bogus page.
+ *
+ * ZERO_PAGE is a global shared page that is always zero: used
+ * for zero-mapped memory areas etc..
+ */
+extern pte_t * __bad_pagetable(void);
+extern pte_t __bad_page(void);
+extern unsigned long empty_zero_page;
+
+#define BAD_PAGETABLE __bad_pagetable()
+#define BAD_PAGE __bad_page()
+#define ZERO_PAGE(vaddr) (virt_to_page(&empty_zero_page))
+
+/*
+ */
+BTFIXUPDEF_CALL_CONST(struct page *, pmd_page, pmd_t)
+BTFIXUPDEF_CALL_CONST(unsigned long, pgd_page_vaddr, pgd_t)
+
+#define pmd_page(pmd) BTFIXUP_CALL(pmd_page)(pmd)
+#define pgd_page_vaddr(pgd) BTFIXUP_CALL(pgd_page_vaddr)(pgd)
+
+BTFIXUPDEF_SETHI(none_mask)
+BTFIXUPDEF_CALL_CONST(int, pte_present, pte_t)
+BTFIXUPDEF_CALL(void, pte_clear, pte_t *)
+
+static inline int pte_none(pte_t pte)
+{
+	return !(pte_val(pte) & ~BTFIXUP_SETHI(none_mask));
+}
+
+#define pte_present(pte) BTFIXUP_CALL(pte_present)(pte)
+#define pte_clear(mm,addr,pte) BTFIXUP_CALL(pte_clear)(pte)
+
+BTFIXUPDEF_CALL_CONST(int, pmd_bad, pmd_t)
+BTFIXUPDEF_CALL_CONST(int, pmd_present, pmd_t)
+BTFIXUPDEF_CALL(void, pmd_clear, pmd_t *)
+
+static inline int pmd_none(pmd_t pmd)
+{
+	return !(pmd_val(pmd) & ~BTFIXUP_SETHI(none_mask));
+}
+
+#define pmd_bad(pmd) BTFIXUP_CALL(pmd_bad)(pmd)
+#define pmd_present(pmd) BTFIXUP_CALL(pmd_present)(pmd)
+#define pmd_clear(pmd) BTFIXUP_CALL(pmd_clear)(pmd)
+
+BTFIXUPDEF_CALL_CONST(int, pgd_none, pgd_t)
+BTFIXUPDEF_CALL_CONST(int, pgd_bad, pgd_t)
+BTFIXUPDEF_CALL_CONST(int, pgd_present, pgd_t)
+BTFIXUPDEF_CALL(void, pgd_clear, pgd_t *)
+
+#define pgd_none(pgd) BTFIXUP_CALL(pgd_none)(pgd)
+#define pgd_bad(pgd) BTFIXUP_CALL(pgd_bad)(pgd)
+#define pgd_present(pgd) BTFIXUP_CALL(pgd_present)(pgd)
+#define pgd_clear(pgd) BTFIXUP_CALL(pgd_clear)(pgd)
+
+/*
+ * The following only work if pte_present() is true.
+ * Undefined behaviour if not..
+ */
+BTFIXUPDEF_HALF(pte_writei)
+BTFIXUPDEF_HALF(pte_dirtyi)
+BTFIXUPDEF_HALF(pte_youngi)
+
+static int pte_write(pte_t pte) __attribute_const__;
+static inline int pte_write(pte_t pte)
+{
+	return pte_val(pte) & BTFIXUP_HALF(pte_writei);
+}
+
+static int pte_dirty(pte_t pte) __attribute_const__;
+static inline int pte_dirty(pte_t pte)
+{
+	return pte_val(pte) & BTFIXUP_HALF(pte_dirtyi);
+}
+
+static int pte_young(pte_t pte) __attribute_const__;
+static inline int pte_young(pte_t pte)
+{
+	return pte_val(pte) & BTFIXUP_HALF(pte_youngi);
+}
+
+/*
+ * The following only work if pte_present() is not true.
+ */
+BTFIXUPDEF_HALF(pte_filei)
+
+static int pte_file(pte_t pte) __attribute_const__;
+static inline int pte_file(pte_t pte)
+{
+	return pte_val(pte) & BTFIXUP_HALF(pte_filei);
+}
+
+static inline int pte_special(pte_t pte)
+{
+	return 0;
+}
+
+/*
+ */
+BTFIXUPDEF_HALF(pte_wrprotecti)
+BTFIXUPDEF_HALF(pte_mkcleani)
+BTFIXUPDEF_HALF(pte_mkoldi)
+
+static pte_t pte_wrprotect(pte_t pte) __attribute_const__;
+static inline pte_t pte_wrprotect(pte_t pte)
+{
+	return __pte(pte_val(pte) & ~BTFIXUP_HALF(pte_wrprotecti));
+}
+
+static pte_t pte_mkclean(pte_t pte) __attribute_const__;
+static inline pte_t pte_mkclean(pte_t pte)
+{
+	return __pte(pte_val(pte) & ~BTFIXUP_HALF(pte_mkcleani));
+}
+
+static pte_t pte_mkold(pte_t pte) __attribute_const__;
+static inline pte_t pte_mkold(pte_t pte)
+{
+	return __pte(pte_val(pte) & ~BTFIXUP_HALF(pte_mkoldi));
+}
+
+BTFIXUPDEF_CALL_CONST(pte_t, pte_mkwrite, pte_t)
+BTFIXUPDEF_CALL_CONST(pte_t, pte_mkdirty, pte_t)
+BTFIXUPDEF_CALL_CONST(pte_t, pte_mkyoung, pte_t)
+
+#define pte_mkwrite(pte) BTFIXUP_CALL(pte_mkwrite)(pte)
+#define pte_mkdirty(pte) BTFIXUP_CALL(pte_mkdirty)(pte)
+#define pte_mkyoung(pte) BTFIXUP_CALL(pte_mkyoung)(pte)
+
+#define pte_mkspecial(pte)    (pte)
+
+#define pfn_pte(pfn, prot)		mk_pte(pfn_to_page(pfn), prot)
+
+BTFIXUPDEF_CALL(unsigned long,	 pte_pfn, pte_t)
+#define pte_pfn(pte) BTFIXUP_CALL(pte_pfn)(pte)
+#define pte_page(pte)	pfn_to_page(pte_pfn(pte))
+
+/*
+ * Conversion functions: convert a page and protection to a page entry,
+ * and a page entry and page directory to the page they refer to.
+ */
+BTFIXUPDEF_CALL_CONST(pte_t, mk_pte, struct page *, pgprot_t)
+
+BTFIXUPDEF_CALL_CONST(pte_t, mk_pte_phys, unsigned long, pgprot_t)
+BTFIXUPDEF_CALL_CONST(pte_t, mk_pte_io, unsigned long, pgprot_t, int)
+BTFIXUPDEF_CALL_CONST(pgprot_t, pgprot_noncached, pgprot_t)
+
+#define mk_pte(page,pgprot) BTFIXUP_CALL(mk_pte)(page,pgprot)
+#define mk_pte_phys(page,pgprot) BTFIXUP_CALL(mk_pte_phys)(page,pgprot)
+#define mk_pte_io(page,pgprot,space) BTFIXUP_CALL(mk_pte_io)(page,pgprot,space)
+
+#define pgprot_noncached(pgprot) BTFIXUP_CALL(pgprot_noncached)(pgprot)
+
+BTFIXUPDEF_INT(pte_modify_mask)
+
+static pte_t pte_modify(pte_t pte, pgprot_t newprot) __attribute_const__;
+static inline pte_t pte_modify(pte_t pte, pgprot_t newprot)
+{
+	return __pte((pte_val(pte) & BTFIXUP_INT(pte_modify_mask)) |
+		pgprot_val(newprot));
+}
+
+#define pgd_index(address) ((address) >> PGDIR_SHIFT)
+
+/* to find an entry in a page-table-directory */
+#define pgd_offset(mm, address) ((mm)->pgd + pgd_index(address))
+
+/* to find an entry in a kernel page-table-directory */
+#define pgd_offset_k(address) pgd_offset(&init_mm, address)
+
+/* Find an entry in the second-level page table.. */
+BTFIXUPDEF_CALL(pmd_t *, pmd_offset, pgd_t *, unsigned long)
+#define pmd_offset(dir,addr) BTFIXUP_CALL(pmd_offset)(dir,addr)
+
+/* Find an entry in the third-level page table.. */
+BTFIXUPDEF_CALL(pte_t *, pte_offset_kernel, pmd_t *, unsigned long)
+#define pte_offset_kernel(dir,addr) BTFIXUP_CALL(pte_offset_kernel)(dir,addr)
+
+/*
+ * This shortcut works on sun4m (and sun4d) because the nocache area is static,
+ * and sun4c is guaranteed to have no highmem anyway.
+ */
+#define pte_offset_map(d, a)		pte_offset_kernel(d,a)
+#define pte_offset_map_nested(d, a)	pte_offset_kernel(d,a)
+
+#define pte_unmap(pte)		do{}while(0)
+#define pte_unmap_nested(pte)	do{}while(0)
+
+/* Certain architectures need to do special things when pte's
+ * within a page table are directly modified.  Thus, the following
+ * hook is made available.
+ */
+
+BTFIXUPDEF_CALL(void, set_pte, pte_t *, pte_t)
+
+#define set_pte(ptep,pteval) BTFIXUP_CALL(set_pte)(ptep,pteval)
+#define set_pte_at(mm,addr,ptep,pteval) set_pte(ptep,pteval)
+
+struct seq_file;
+BTFIXUPDEF_CALL(void, mmu_info, struct seq_file *)
+
+#define mmu_info(p) BTFIXUP_CALL(mmu_info)(p)
+
+/* Fault handler stuff... */
+#define FAULT_CODE_PROT     0x1
+#define FAULT_CODE_WRITE    0x2
+#define FAULT_CODE_USER     0x4
+
+BTFIXUPDEF_CALL(void, update_mmu_cache, struct vm_area_struct *, unsigned long, pte_t)
+
+#define update_mmu_cache(vma,addr,pte) BTFIXUP_CALL(update_mmu_cache)(vma,addr,pte)
+
+BTFIXUPDEF_CALL(void, sparc_mapiorange, unsigned int, unsigned long,
+    unsigned long, unsigned int)
+BTFIXUPDEF_CALL(void, sparc_unmapiorange, unsigned long, unsigned int)
+#define sparc_mapiorange(bus,pa,va,len) BTFIXUP_CALL(sparc_mapiorange)(bus,pa,va,len)
+#define sparc_unmapiorange(va,len) BTFIXUP_CALL(sparc_unmapiorange)(va,len)
+
+extern int invalid_segment;
+
+/* Encode and de-code a swap entry */
+BTFIXUPDEF_CALL(unsigned long, __swp_type, swp_entry_t)
+BTFIXUPDEF_CALL(unsigned long, __swp_offset, swp_entry_t)
+BTFIXUPDEF_CALL(swp_entry_t, __swp_entry, unsigned long, unsigned long)
+
+#define __swp_type(__x)			BTFIXUP_CALL(__swp_type)(__x)
+#define __swp_offset(__x)		BTFIXUP_CALL(__swp_offset)(__x)
+#define __swp_entry(__type,__off)	BTFIXUP_CALL(__swp_entry)(__type,__off)
+
+#define __pte_to_swp_entry(pte)		((swp_entry_t) { pte_val(pte) })
+#define __swp_entry_to_pte(x)		((pte_t) { (x).val })
+
+/* file-offset-in-pte helpers */
+BTFIXUPDEF_CALL(unsigned long, pte_to_pgoff, pte_t pte);
+BTFIXUPDEF_CALL(pte_t, pgoff_to_pte, unsigned long pgoff);
+
+#define pte_to_pgoff(pte) BTFIXUP_CALL(pte_to_pgoff)(pte)
+#define pgoff_to_pte(off) BTFIXUP_CALL(pgoff_to_pte)(off)
+
+/*
+ * This is made a constant because mm/fremap.c required a constant.
+ * Note that layout of these bits is different between sun4c.c and srmmu.c.
+ */
+#define PTE_FILE_MAX_BITS 24
+
+/*
+ */
+struct ctx_list {
+	struct ctx_list *next;
+	struct ctx_list *prev;
+	unsigned int ctx_number;
+	struct mm_struct *ctx_mm;
+};
+
+extern struct ctx_list *ctx_list_pool;  /* Dynamically allocated */
+extern struct ctx_list ctx_free;        /* Head of free list */
+extern struct ctx_list ctx_used;        /* Head of used contexts list */
+
+#define NO_CONTEXT     -1
+
+static inline void remove_from_ctx_list(struct ctx_list *entry)
+{
+	entry->next->prev = entry->prev;
+	entry->prev->next = entry->next;
+}
+
+static inline void add_to_ctx_list(struct ctx_list *head, struct ctx_list *entry)
+{
+	entry->next = head;
+	(entry->prev = head->prev)->next = entry;
+	head->prev = entry;
+}
+#define add_to_free_ctxlist(entry) add_to_ctx_list(&ctx_free, entry)
+#define add_to_used_ctxlist(entry) add_to_ctx_list(&ctx_used, entry)
+
+static inline unsigned long
+__get_phys (unsigned long addr)
+{
+	switch (sparc_cpu_model){
+	case sun4:
+	case sun4c:
+		return sun4c_get_pte (addr) << PAGE_SHIFT;
+	case sun4m:
+	case sun4d:
+		return ((srmmu_get_pte (addr) & 0xffffff00) << 4);
+	default:
+		return 0;
+	}
+}
+
+static inline int
+__get_iospace (unsigned long addr)
+{
+	switch (sparc_cpu_model){
+	case sun4:
+	case sun4c:
+		return -1; /* Don't check iospace on sun4c */
+	case sun4m:
+	case sun4d:
+		return (srmmu_get_pte (addr) >> 28);
+	default:
+		return -1;
+	}
+}
+
+extern unsigned long *sparc_valid_addr_bitmap;
+
+/* Needs to be defined here and not in linux/mm.h, as it is arch dependent */
+#define kern_addr_valid(addr) \
+	(test_bit(__pa((unsigned long)(addr))>>20, sparc_valid_addr_bitmap))
+
+extern int io_remap_pfn_range(struct vm_area_struct *vma,
+			      unsigned long from, unsigned long pfn,
+			      unsigned long size, pgprot_t prot);
+
+/*
+ * For sparc32&64, the pfn in io_remap_pfn_range() carries <iospace> in
+ * its high 4 bits.  These macros/functions put it there or get it from there.
+ */
+#define MK_IOSPACE_PFN(space, pfn)	(pfn | (space << (BITS_PER_LONG - 4)))
+#define GET_IOSPACE(pfn)		(pfn >> (BITS_PER_LONG - 4))
+#define GET_PFN(pfn)			(pfn & 0x0fffffffUL)
+
+#define __HAVE_ARCH_PTEP_SET_ACCESS_FLAGS
+#define ptep_set_access_flags(__vma, __address, __ptep, __entry, __dirty) \
+({									  \
+	int __changed = !pte_same(*(__ptep), __entry);			  \
+	if (__changed) {						  \
+		set_pte_at((__vma)->vm_mm, (__address), __ptep, __entry); \
+		flush_tlb_page(__vma, __address);			  \
+	}								  \
+	(sparc_cpu_model == sun4c) || __changed;			  \
+})
+
+#include <asm-generic/pgtable.h>
+
+#endif /* !(__ASSEMBLY__) */
+
+#define VMALLOC_START           0xfe600000
+/* XXX Alter this when I get around to fixing sun4c - Anton */
+#define VMALLOC_END             0xffc00000
+
+
+/* We provide our own get_unmapped_area to cope with VA holes for userland */
+#define HAVE_ARCH_UNMAPPED_AREA
+
+/*
+ * No page table caches to initialise
+ */
+#define pgtable_cache_init()	do { } while (0)
+
+#endif /* !(_SPARC_PGTABLE_H) */
diff --git a/include/asm-sparc/pgtable_64.h b/arch/sparc/include/asm/pgtable_64.h
index bb9ec2cce355..bb9ec2cce355 100644
--- a/include/asm-sparc/pgtable_64.h
+++ b/arch/sparc/include/asm/pgtable_64.h
diff --git a/include/asm-sparc/pgtsrmmu.h b/arch/sparc/include/asm/pgtsrmmu.h
index 808555fc1d58..808555fc1d58 100644
--- a/include/asm-sparc/pgtsrmmu.h
+++ b/arch/sparc/include/asm/pgtsrmmu.h
diff --git a/include/asm-sparc/pgtsun4.h b/arch/sparc/include/asm/pgtsun4.h
index 5a0d661fb82e..5a0d661fb82e 100644
--- a/include/asm-sparc/pgtsun4.h
+++ b/arch/sparc/include/asm/pgtsun4.h
diff --git a/include/asm-sparc/pgtsun4c.h b/arch/sparc/include/asm/pgtsun4c.h
index aeb25e912179..aeb25e912179 100644
--- a/include/asm-sparc/pgtsun4c.h
+++ b/arch/sparc/include/asm/pgtsun4c.h
diff --git a/include/asm-sparc/pil.h b/arch/sparc/include/asm/pil.h
index 71819bb943fc..71819bb943fc 100644
--- a/include/asm-sparc/pil.h
+++ b/arch/sparc/include/asm/pil.h
diff --git a/include/asm-sparc/poll.h b/arch/sparc/include/asm/poll.h
index 091d3ad2e830..091d3ad2e830 100644
--- a/include/asm-sparc/poll.h
+++ b/arch/sparc/include/asm/poll.h
diff --git a/arch/sparc/include/asm/posix_types.h b/arch/sparc/include/asm/posix_types.h
new file mode 100644
index 000000000000..03a0e091a884
--- /dev/null
+++ b/arch/sparc/include/asm/posix_types.h
@@ -0,0 +1,8 @@
+#ifndef ___ASM_SPARC_POSIX_TYPES_H
+#define ___ASM_SPARC_POSIX_TYPES_H
+#if defined(__sparc__) && defined(__arch64__)
+#include <asm/posix_types_64.h>
+#else
+#include <asm/posix_types_32.h>
+#endif
+#endif
diff --git a/include/asm-sparc/posix_types_32.h b/arch/sparc/include/asm/posix_types_32.h
index 6bb6eb1ca0f2..6bb6eb1ca0f2 100644
--- a/include/asm-sparc/posix_types_32.h
+++ b/arch/sparc/include/asm/posix_types_32.h
diff --git a/include/asm-sparc/posix_types_64.h b/arch/sparc/include/asm/posix_types_64.h
index ba8f93295763..ba8f93295763 100644
--- a/include/asm-sparc/posix_types_64.h
+++ b/arch/sparc/include/asm/posix_types_64.h
diff --git a/arch/sparc/include/asm/processor.h b/arch/sparc/include/asm/processor.h
new file mode 100644
index 000000000000..9da9646bf6c6
--- /dev/null
+++ b/arch/sparc/include/asm/processor.h
@@ -0,0 +1,8 @@
+#ifndef ___ASM_SPARC_PROCESSOR_H
+#define ___ASM_SPARC_PROCESSOR_H
+#if defined(__sparc__) && defined(__arch64__)
+#include <asm/processor_64.h>
+#else
+#include <asm/processor_32.h>
+#endif
+#endif
diff --git a/arch/sparc/include/asm/processor_32.h b/arch/sparc/include/asm/processor_32.h
new file mode 100644
index 000000000000..2ae67a2e7f3a
--- /dev/null
+++ b/arch/sparc/include/asm/processor_32.h
@@ -0,0 +1,129 @@
+/* include/asm/processor.h
+ *
+ * Copyright (C) 1994 David S. Miller (davem@caip.rutgers.edu)
+ */
+
+#ifndef __ASM_SPARC_PROCESSOR_H
+#define __ASM_SPARC_PROCESSOR_H
+
+/*
+ * Sparc32 implementation of macro that returns current
+ * instruction pointer ("program counter").
+ */
+#define current_text_addr() ({ void *pc; __asm__("sethi %%hi(1f), %0; or %0, %%lo(1f), %0;\n1:" : "=r" (pc)); pc; })
+
+#include <asm/psr.h>
+#include <asm/ptrace.h>
+#include <asm/head.h>
+#include <asm/signal.h>
+#include <asm/btfixup.h>
+#include <asm/page.h>
+
+/*
+ * The sparc has no problems with write protection
+ */
+#define wp_works_ok 1
+#define wp_works_ok__is_a_macro /* for versions in ksyms.c */
+
+/* Whee, this is STACK_TOP + PAGE_SIZE and the lowest kernel address too...
+ * That one page is used to protect kernel from intruders, so that
+ * we can make our access_ok test faster
+ */
+#define TASK_SIZE	PAGE_OFFSET
+#ifdef __KERNEL__
+#define STACK_TOP	(PAGE_OFFSET - PAGE_SIZE)
+#define STACK_TOP_MAX	STACK_TOP
+#endif /* __KERNEL__ */
+
+struct task_struct;
+
+#ifdef __KERNEL__
+struct fpq {
+	unsigned long *insn_addr;
+	unsigned long insn;
+};
+#endif
+
+typedef struct {
+	int seg;
+} mm_segment_t;
+
+/* The Sparc processor specific thread struct. */
+struct thread_struct {
+	struct pt_regs *kregs;
+	unsigned int _pad1;
+
+	/* Special child fork kpsr/kwim values. */
+	unsigned long fork_kpsr __attribute__ ((aligned (8)));
+	unsigned long fork_kwim;
+
+	/* Floating point regs */
+	unsigned long   float_regs[32] __attribute__ ((aligned (8)));
+	unsigned long   fsr;
+	unsigned long   fpqdepth;
+	struct fpq	fpqueue[16];
+	unsigned long flags;
+	mm_segment_t current_ds;
+};
+
+#define SPARC_FLAG_KTHREAD      0x1    /* task is a kernel thread */
+#define SPARC_FLAG_UNALIGNED    0x2    /* is allowed to do unaligned accesses */
+
+#define INIT_THREAD  { \
+	.flags = SPARC_FLAG_KTHREAD, \
+	.current_ds = KERNEL_DS, \
+}
+
+/* Return saved PC of a blocked thread. */
+extern unsigned long thread_saved_pc(struct task_struct *t);
+
+/* Do necessary setup to start up a newly executed thread. */
+static inline void start_thread(struct pt_regs * regs, unsigned long pc,
+				    unsigned long sp)
+{
+	register unsigned long zero asm("g1");
+
+	regs->psr = (regs->psr & (PSR_CWP)) | PSR_S;
+	regs->pc = ((pc & (~3)) - 4);
+	regs->npc = regs->pc + 4;
+	regs->y = 0;
+	zero = 0;
+	__asm__ __volatile__("std\t%%g0, [%0 + %3 + 0x00]\n\t"
+			     "std\t%%g0, [%0 + %3 + 0x08]\n\t"
+			     "std\t%%g0, [%0 + %3 + 0x10]\n\t"
+			     "std\t%%g0, [%0 + %3 + 0x18]\n\t"
+			     "std\t%%g0, [%0 + %3 + 0x20]\n\t"
+			     "std\t%%g0, [%0 + %3 + 0x28]\n\t"
+			     "std\t%%g0, [%0 + %3 + 0x30]\n\t"
+			     "st\t%1, [%0 + %3 + 0x38]\n\t"
+			     "st\t%%g0, [%0 + %3 + 0x3c]"
+			     : /* no outputs */
+			     : "r" (regs),
+			       "r" (sp - sizeof(struct reg_window)),
+			       "r" (zero),
+			       "i" ((const unsigned long)(&((struct pt_regs *)0)->u_regs[0]))
+			     : "memory");
+}
+
+/* Free all resources held by a thread. */
+#define release_thread(tsk)		do { } while(0)
+extern pid_t kernel_thread(int (*fn)(void *), void * arg, unsigned long flags);
+
+/* Prepare to copy thread state - unlazy all lazy status */
+#define prepare_to_copy(tsk)	do { } while (0)
+
+extern unsigned long get_wchan(struct task_struct *);
+
+#define task_pt_regs(tsk) ((tsk)->thread.kregs)
+#define KSTK_EIP(tsk)  ((tsk)->thread.kregs->pc)
+#define KSTK_ESP(tsk)  ((tsk)->thread.kregs->u_regs[UREG_FP])
+
+#ifdef __KERNEL__
+
+extern struct task_struct *last_task_used_math;
+
+#define cpu_relax()	barrier()
+
+#endif
+
+#endif /* __ASM_SPARC_PROCESSOR_H */
diff --git a/arch/sparc/include/asm/processor_64.h b/arch/sparc/include/asm/processor_64.h
new file mode 100644
index 000000000000..137a6bd72fc8
--- /dev/null
+++ b/arch/sparc/include/asm/processor_64.h
@@ -0,0 +1,237 @@
+/*
+ * include/asm/processor.h
+ *
+ * Copyright (C) 1996 David S. Miller (davem@caip.rutgers.edu)
+ */
+
+#ifndef __ASM_SPARC64_PROCESSOR_H
+#define __ASM_SPARC64_PROCESSOR_H
+
+/*
+ * Sparc64 implementation of macro that returns current
+ * instruction pointer ("program counter").
+ */
+#define current_text_addr() ({ void *pc; __asm__("rd %%pc, %0" : "=r" (pc)); pc; })
+
+#include <asm/asi.h>
+#include <asm/pstate.h>
+#include <asm/ptrace.h>
+#include <asm/page.h>
+
+/* The sparc has no problems with write protection */
+#define wp_works_ok 1
+#define wp_works_ok__is_a_macro /* for versions in ksyms.c */
+
+/*
+ * User lives in his very own context, and cannot reference us. Note
+ * that TASK_SIZE is a misnomer, it really gives maximum user virtual
+ * address that the kernel will allocate out.
+ *
+ * XXX No longer using virtual page tables, kill this upper limit...
+ */
+#define VA_BITS		44
+#ifndef __ASSEMBLY__
+#define VPTE_SIZE	(1UL << (VA_BITS - PAGE_SHIFT + 3))
+#else
+#define VPTE_SIZE	(1 << (VA_BITS - PAGE_SHIFT + 3))
+#endif
+
+#define TASK_SIZE	((unsigned long)-VPTE_SIZE)
+#define TASK_SIZE_OF(tsk) \
+	(test_tsk_thread_flag(tsk,TIF_32BIT) ? \
+	 (1UL << 32UL) : TASK_SIZE)
+#ifdef __KERNEL__
+
+#define STACK_TOP32	((1UL << 32UL) - PAGE_SIZE)
+#define STACK_TOP64	(0x0000080000000000UL - (1UL << 32UL))
+
+#define STACK_TOP	(test_thread_flag(TIF_32BIT) ? \
+			 STACK_TOP32 : STACK_TOP64)
+
+#define STACK_TOP_MAX	STACK_TOP64
+
+#endif
+
+#ifndef __ASSEMBLY__
+
+typedef struct {
+	unsigned char seg;
+} mm_segment_t;
+
+/* The Sparc processor specific thread struct. */
+/* XXX This should die, everything can go into thread_info now. */
+struct thread_struct {
+#ifdef CONFIG_DEBUG_SPINLOCK
+	/* How many spinlocks held by this thread.
+	 * Used with spin lock debugging to catch tasks
+	 * sleeping illegally with locks held.
+	 */
+	int smp_lock_count;
+	unsigned int smp_lock_pc;
+#else
+	int dummy; /* f'in gcc bug... */
+#endif
+};
+
+#endif /* !(__ASSEMBLY__) */
+
+#ifndef CONFIG_DEBUG_SPINLOCK
+#define INIT_THREAD  {			\
+	0,				\
+}
+#else /* CONFIG_DEBUG_SPINLOCK */
+#define INIT_THREAD  {					\
+/* smp_lock_count, smp_lock_pc, */			\
+   0,		   0,					\
+}
+#endif /* !(CONFIG_DEBUG_SPINLOCK) */
+
+#ifndef __ASSEMBLY__
+
+#include <linux/types.h>
+
+/* Return saved PC of a blocked thread. */
+struct task_struct;
+extern unsigned long thread_saved_pc(struct task_struct *);
+
+/* On Uniprocessor, even in RMO processes see TSO semantics */
+#ifdef CONFIG_SMP
+#define TSTATE_INITIAL_MM	TSTATE_TSO
+#else
+#define TSTATE_INITIAL_MM	TSTATE_RMO
+#endif
+
+/* Do necessary setup to start up a newly executed thread. */
+#define start_thread(regs, pc, sp) \
+do { \
+	unsigned long __asi = ASI_PNF; \
+	regs->tstate = (regs->tstate & (TSTATE_CWP)) | (TSTATE_INITIAL_MM|TSTATE_IE) | (__asi << 24UL); \
+	regs->tpc = ((pc & (~3)) - 4); \
+	regs->tnpc = regs->tpc + 4; \
+	regs->y = 0; \
+	set_thread_wstate(1 << 3); \
+	if (current_thread_info()->utraps) { \
+		if (*(current_thread_info()->utraps) < 2) \
+			kfree(current_thread_info()->utraps); \
+		else \
+			(*(current_thread_info()->utraps))--; \
+		current_thread_info()->utraps = NULL; \
+	} \
+	__asm__ __volatile__( \
+	"stx		%%g0, [%0 + %2 + 0x00]\n\t" \
+	"stx		%%g0, [%0 + %2 + 0x08]\n\t" \
+	"stx		%%g0, [%0 + %2 + 0x10]\n\t" \
+	"stx		%%g0, [%0 + %2 + 0x18]\n\t" \
+	"stx		%%g0, [%0 + %2 + 0x20]\n\t" \
+	"stx		%%g0, [%0 + %2 + 0x28]\n\t" \
+	"stx		%%g0, [%0 + %2 + 0x30]\n\t" \
+	"stx		%%g0, [%0 + %2 + 0x38]\n\t" \
+	"stx		%%g0, [%0 + %2 + 0x40]\n\t" \
+	"stx		%%g0, [%0 + %2 + 0x48]\n\t" \
+	"stx		%%g0, [%0 + %2 + 0x50]\n\t" \
+	"stx		%%g0, [%0 + %2 + 0x58]\n\t" \
+	"stx		%%g0, [%0 + %2 + 0x60]\n\t" \
+	"stx		%%g0, [%0 + %2 + 0x68]\n\t" \
+	"stx		%1,   [%0 + %2 + 0x70]\n\t" \
+	"stx		%%g0, [%0 + %2 + 0x78]\n\t" \
+	"wrpr		%%g0, (1 << 3), %%wstate\n\t" \
+	: \
+	: "r" (regs), "r" (sp - sizeof(struct reg_window) - STACK_BIAS), \
+	  "i" ((const unsigned long)(&((struct pt_regs *)0)->u_regs[0]))); \
+} while (0)
+
+#define start_thread32(regs, pc, sp) \
+do { \
+	unsigned long __asi = ASI_PNF; \
+	pc &= 0x00000000ffffffffUL; \
+	sp &= 0x00000000ffffffffUL; \
+	regs->tstate = (regs->tstate & (TSTATE_CWP))|(TSTATE_INITIAL_MM|TSTATE_IE|TSTATE_AM) | (__asi << 24UL); \
+	regs->tpc = ((pc & (~3)) - 4); \
+	regs->tnpc = regs->tpc + 4; \
+	regs->y = 0; \
+	set_thread_wstate(2 << 3); \
+	if (current_thread_info()->utraps) { \
+		if (*(current_thread_info()->utraps) < 2) \
+			kfree(current_thread_info()->utraps); \
+		else \
+			(*(current_thread_info()->utraps))--; \
+		current_thread_info()->utraps = NULL; \
+	} \
+	__asm__ __volatile__( \
+	"stx		%%g0, [%0 + %2 + 0x00]\n\t" \
+	"stx		%%g0, [%0 + %2 + 0x08]\n\t" \
+	"stx		%%g0, [%0 + %2 + 0x10]\n\t" \
+	"stx		%%g0, [%0 + %2 + 0x18]\n\t" \
+	"stx		%%g0, [%0 + %2 + 0x20]\n\t" \
+	"stx		%%g0, [%0 + %2 + 0x28]\n\t" \
+	"stx		%%g0, [%0 + %2 + 0x30]\n\t" \
+	"stx		%%g0, [%0 + %2 + 0x38]\n\t" \
+	"stx		%%g0, [%0 + %2 + 0x40]\n\t" \
+	"stx		%%g0, [%0 + %2 + 0x48]\n\t" \
+	"stx		%%g0, [%0 + %2 + 0x50]\n\t" \
+	"stx		%%g0, [%0 + %2 + 0x58]\n\t" \
+	"stx		%%g0, [%0 + %2 + 0x60]\n\t" \
+	"stx		%%g0, [%0 + %2 + 0x68]\n\t" \
+	"stx		%1,   [%0 + %2 + 0x70]\n\t" \
+	"stx		%%g0, [%0 + %2 + 0x78]\n\t" \
+	"wrpr		%%g0, (2 << 3), %%wstate\n\t" \
+	: \
+	: "r" (regs), "r" (sp - sizeof(struct reg_window32)), \
+	  "i" ((const unsigned long)(&((struct pt_regs *)0)->u_regs[0]))); \
+} while (0)
+
+/* Free all resources held by a thread. */
+#define release_thread(tsk)		do { } while (0)
+
+/* Prepare to copy thread state - unlazy all lazy status */
+#define prepare_to_copy(tsk)	do { } while (0)
+
+extern pid_t kernel_thread(int (*fn)(void *), void * arg, unsigned long flags);
+
+extern unsigned long get_wchan(struct task_struct *task);
+
+#define task_pt_regs(tsk) (task_thread_info(tsk)->kregs)
+#define KSTK_EIP(tsk)  (task_pt_regs(tsk)->tpc)
+#define KSTK_ESP(tsk)  (task_pt_regs(tsk)->u_regs[UREG_FP])
+
+#define cpu_relax()	barrier()
+
+/* Prefetch support.  This is tuned for UltraSPARC-III and later.
+ * UltraSPARC-I will treat these as nops, and UltraSPARC-II has
+ * a shallower prefetch queue than later chips.
+ */
+#define ARCH_HAS_PREFETCH
+#define ARCH_HAS_PREFETCHW
+#define ARCH_HAS_SPINLOCK_PREFETCH
+
+static inline void prefetch(const void *x)
+{
+	/* We do not use the read prefetch mnemonic because that
+	 * prefetches into the prefetch-cache which only is accessible
+	 * by floating point operations in UltraSPARC-III and later.
+	 * By contrast, "#one_write" prefetches into the L2 cache
+	 * in shared state.
+	 */
+	__asm__ __volatile__("prefetch [%0], #one_write"
+			     : /* no outputs */
+			     : "r" (x));
+}
+
+static inline void prefetchw(const void *x)
+{
+	/* The most optimal prefetch to use for writes is
+	 * "#n_writes".  This brings the cacheline into the
+	 * L2 cache in "owned" state.
+	 */
+	__asm__ __volatile__("prefetch [%0], #n_writes"
+			     : /* no outputs */
+			     : "r" (x));
+}
+
+#define spin_lock_prefetch(x)	prefetchw(x)
+
+#define HAVE_ARCH_PICK_MMAP_LAYOUT
+
+#endif /* !(__ASSEMBLY__) */
+
+#endif /* !(__ASM_SPARC64_PROCESSOR_H) */
diff --git a/include/asm-sparc/prom.h b/arch/sparc/include/asm/prom.h
index fd55522481cd..fd55522481cd 100644
--- a/include/asm-sparc/prom.h
+++ b/arch/sparc/include/asm/prom.h
diff --git a/include/asm-sparc/psr.h b/arch/sparc/include/asm/psr.h
index b8c0e5f0a66b..b8c0e5f0a66b 100644
--- a/include/asm-sparc/psr.h
+++ b/arch/sparc/include/asm/psr.h
diff --git a/include/asm-sparc/psrcompat.h b/arch/sparc/include/asm/psrcompat.h
index 44b6327dbbf5..44b6327dbbf5 100644
--- a/include/asm-sparc/psrcompat.h
+++ b/arch/sparc/include/asm/psrcompat.h
diff --git a/include/asm-sparc/pstate.h b/arch/sparc/include/asm/pstate.h
index a26a53777bb0..a26a53777bb0 100644
--- a/include/asm-sparc/pstate.h
+++ b/arch/sparc/include/asm/pstate.h
diff --git a/arch/sparc/include/asm/ptrace.h b/arch/sparc/include/asm/ptrace.h
new file mode 100644
index 000000000000..6dcbe2eed2e2
--- /dev/null
+++ b/arch/sparc/include/asm/ptrace.h
@@ -0,0 +1,8 @@
+#ifndef ___ASM_SPARC_PTRACE_H
+#define ___ASM_SPARC_PTRACE_H
+#if defined(__sparc__) && defined(__arch64__)
+#include <asm/ptrace_64.h>
+#else
+#include <asm/ptrace_32.h>
+#endif
+#endif
diff --git a/include/asm-sparc/ptrace_32.h b/arch/sparc/include/asm/ptrace_32.h
index 0401cc7ec38e..d409c4f21a5c 100644
--- a/include/asm-sparc/ptrace_32.h
+++ b/arch/sparc/include/asm/ptrace_32.h
@@ -40,16 +40,6 @@ struct pt_regs {
 #define UREG_FP        UREG_I6
 #define UREG_RETPC     UREG_I7
 
-static inline bool pt_regs_is_syscall(struct pt_regs *regs)
-{
-	return (regs->psr & PSR_SYSCALL);
-}
-
-static inline bool pt_regs_clear_syscall(struct pt_regs *regs)
-{
-	return (regs->psr &= ~PSR_SYSCALL);
-}
-
 /* A register window */
 struct reg_window {
 	unsigned long locals[8];
@@ -72,8 +62,19 @@ struct sparc_stackf {
 
 #ifdef __KERNEL__
 
+static inline bool pt_regs_is_syscall(struct pt_regs *regs)
+{
+	return (regs->psr & PSR_SYSCALL);
+}
+
+static inline bool pt_regs_clear_syscall(struct pt_regs *regs)
+{
+	return (regs->psr &= ~PSR_SYSCALL);
+}
+
 #define user_mode(regs) (!((regs)->psr & PSR_PS))
 #define instruction_pointer(regs) ((regs)->pc)
+#define user_stack_pointer(regs) ((regs)->u_regs[UREG_FP])
 unsigned long profile_pc(struct pt_regs *);
 extern void show_regs(struct pt_regs *);
 #endif
diff --git a/include/asm-sparc/ptrace_64.h b/arch/sparc/include/asm/ptrace_64.h
index a682e66d5c4a..06e4914c13f4 100644
--- a/include/asm-sparc/ptrace_64.h
+++ b/arch/sparc/include/asm/ptrace_64.h
@@ -37,21 +37,6 @@ struct pt_regs {
 	unsigned int magic;
 };
 
-static inline int pt_regs_trap_type(struct pt_regs *regs)
-{
-	return regs->magic & 0x1ff;
-}
-
-static inline bool pt_regs_is_syscall(struct pt_regs *regs)
-{
-	return (regs->tstate & TSTATE_SYSCALL);
-}
-
-static inline bool pt_regs_clear_syscall(struct pt_regs *regs)
-{
-	return (regs->tstate &= ~TSTATE_SYSCALL);
-}
-
 struct pt_regs32 {
 	unsigned int psr;
 	unsigned int pc;
@@ -128,15 +113,30 @@ struct sparc_trapf {
 
 #ifdef __KERNEL__
 
+static inline int pt_regs_trap_type(struct pt_regs *regs)
+{
+	return regs->magic & 0x1ff;
+}
+
+static inline bool pt_regs_is_syscall(struct pt_regs *regs)
+{
+	return (regs->tstate & TSTATE_SYSCALL);
+}
+
+static inline bool pt_regs_clear_syscall(struct pt_regs *regs)
+{
+	return (regs->tstate &= ~TSTATE_SYSCALL);
+}
+
 struct global_reg_snapshot {
 	unsigned long		tstate;
 	unsigned long		tpc;
 	unsigned long		tnpc;
 	unsigned long		o7;
 	unsigned long		i7;
+	unsigned long		rpc;
 	struct thread_info	*thread;
 	unsigned long		pad1;
-	unsigned long		pad2;
 };
 
 #define __ARCH_WANT_COMPAT_SYS_PTRACE
@@ -146,6 +146,7 @@ do {	current_thread_info()->syscall_noerror = 1; \
 } while (0)
 #define user_mode(regs) (!((regs)->tstate & TSTATE_PRIV))
 #define instruction_pointer(regs) ((regs)->tpc)
+#define user_stack_pointer(regs) ((regs)->u_regs[UREG_FP])
 #define regs_return_value(regs) ((regs)->u_regs[UREG_I0])
 #ifdef CONFIG_SMP
 extern unsigned long profile_pc(struct pt_regs *);
@@ -153,7 +154,6 @@ extern unsigned long profile_pc(struct pt_regs *);
 #define profile_pc(regs) instruction_pointer(regs)
 #endif
 extern void show_regs(struct pt_regs *);
-extern void __show_regs(struct pt_regs *);
 #endif
 
 #else /* __ASSEMBLY__ */
@@ -314,9 +314,9 @@ extern void __show_regs(struct pt_regs *);
 #define GR_SNAP_TNPC	0x10
 #define GR_SNAP_O7	0x18
 #define GR_SNAP_I7	0x20
-#define GR_SNAP_THREAD	0x28
-#define GR_SNAP_PAD1	0x30
-#define GR_SNAP_PAD2	0x38
+#define GR_SNAP_RPC	0x28
+#define GR_SNAP_THREAD	0x30
+#define GR_SNAP_PAD1	0x38
 
 #endif  /*  __KERNEL__  */
 
diff --git a/include/asm-sparc/reboot.h b/arch/sparc/include/asm/reboot.h
index 3f3f43f5be5e..3f3f43f5be5e 100644
--- a/include/asm-sparc/reboot.h
+++ b/arch/sparc/include/asm/reboot.h
diff --git a/arch/sparc/include/asm/reg.h b/arch/sparc/include/asm/reg.h
new file mode 100644
index 000000000000..0c16e19cae4d
--- /dev/null
+++ b/arch/sparc/include/asm/reg.h
@@ -0,0 +1,8 @@
+#ifndef ___ASM_SPARC_REG_H
+#define ___ASM_SPARC_REG_H
+#if defined(__sparc__) && defined(__arch64__)
+#include <asm/reg_64.h>
+#else
+#include <asm/reg_32.h>
+#endif
+#endif
diff --git a/include/asm-sparc/reg_32.h b/arch/sparc/include/asm/reg_32.h
index 42fecfcd97e7..1efb056fb3d1 100644
--- a/include/asm-sparc/reg_32.h
+++ b/arch/sparc/include/asm/reg_32.h
@@ -1,5 +1,5 @@
 /*
- * linux/include/asm-sparc/reg.h
+ * linux/include/asm/reg.h
  * Layout of the registers as expected by gdb on the Sparc
  * we should replace the user.h definitions with those in
  * this file, we don't even use the other
diff --git a/include/asm-sparc/reg_64.h b/arch/sparc/include/asm/reg_64.h
index eb24a07ff4d5..6f277d7c7d88 100644
--- a/include/asm-sparc/reg_64.h
+++ b/arch/sparc/include/asm/reg_64.h
@@ -1,5 +1,5 @@
 /*
- * linux/asm-sparc64/reg.h
+ * linux/asm/reg.h
  * Layout of the registers as expected by gdb on the Sparc
  * we should replace the user.h definitions with those in
  * this file, we don't even use the other
diff --git a/include/asm-sparc/resource.h b/arch/sparc/include/asm/resource.h
index fe163cafb4c7..fe163cafb4c7 100644
--- a/include/asm-sparc/resource.h
+++ b/arch/sparc/include/asm/resource.h
diff --git a/include/asm-sparc/ross.h b/arch/sparc/include/asm/ross.h
index ecb6e81786a6..ecb6e81786a6 100644
--- a/include/asm-sparc/ross.h
+++ b/arch/sparc/include/asm/ross.h
diff --git a/include/asm-sparc/rtc.h b/arch/sparc/include/asm/rtc.h
index f9ecb1fe2ecd..f9ecb1fe2ecd 100644
--- a/include/asm-sparc/rtc.h
+++ b/arch/sparc/include/asm/rtc.h
diff --git a/include/asm-sparc/rwsem-const.h b/arch/sparc/include/asm/rwsem-const.h
index a303c9d64d84..a303c9d64d84 100644
--- a/include/asm-sparc/rwsem-const.h
+++ b/arch/sparc/include/asm/rwsem-const.h
diff --git a/include/asm-sparc/rwsem.h b/arch/sparc/include/asm/rwsem.h
index 1dc129ac2feb..1dc129ac2feb 100644
--- a/include/asm-sparc/rwsem.h
+++ b/arch/sparc/include/asm/rwsem.h
diff --git a/include/asm-sparc/sbi.h b/arch/sparc/include/asm/sbi.h
index 5eb7f1965d33..5eb7f1965d33 100644
--- a/include/asm-sparc/sbi.h
+++ b/arch/sparc/include/asm/sbi.h
diff --git a/arch/sparc/include/asm/sbus.h b/arch/sparc/include/asm/sbus.h
new file mode 100644
index 000000000000..f82481ab44db
--- /dev/null
+++ b/arch/sparc/include/asm/sbus.h
@@ -0,0 +1,8 @@
+#ifndef ___ASM_SPARC_SBUS_H
+#define ___ASM_SPARC_SBUS_H
+#if defined(__sparc__) && defined(__arch64__)
+#include <asm/sbus_64.h>
+#else
+#include <asm/sbus_32.h>
+#endif
+#endif
diff --git a/include/asm-sparc/sbus_32.h b/arch/sparc/include/asm/sbus_32.h
index 77b5d3aadc99..a7b4fa21931d 100644
--- a/include/asm-sparc/sbus_32.h
+++ b/arch/sparc/include/asm/sbus_32.h
@@ -9,10 +9,10 @@
 
 #include <linux/dma-mapping.h>
 #include <linux/ioport.h>
+#include <linux/of_device.h>
 
 #include <asm/oplib.h>
 #include <asm/prom.h>
-#include <asm/of_device.h>
 #include <asm/scatterlist.h>
 
 /* We scan which devices are on the SBus using the PROM node device
diff --git a/include/asm-sparc/sbus_64.h b/arch/sparc/include/asm/sbus_64.h
index 0e16b6dd7e96..b606c14343fb 100644
--- a/include/asm-sparc/sbus_64.h
+++ b/arch/sparc/include/asm/sbus_64.h
@@ -8,10 +8,10 @@
 
 #include <linux/dma-mapping.h>
 #include <linux/ioport.h>
+#include <linux/of_device.h>
 
 #include <asm/oplib.h>
 #include <asm/prom.h>
-#include <asm/of_device.h>
 #include <asm/iommu.h>
 #include <asm/scatterlist.h>
 
diff --git a/arch/sparc/include/asm/scatterlist.h b/arch/sparc/include/asm/scatterlist.h
new file mode 100644
index 000000000000..ec21a4517641
--- /dev/null
+++ b/arch/sparc/include/asm/scatterlist.h
@@ -0,0 +1,8 @@
+#ifndef ___ASM_SPARC_SCATTERLIST_H
+#define ___ASM_SPARC_SCATTERLIST_H
+#if defined(__sparc__) && defined(__arch64__)
+#include <asm/scatterlist_64.h>
+#else
+#include <asm/scatterlist_32.h>
+#endif
+#endif
diff --git a/include/asm-sparc/scatterlist_32.h b/arch/sparc/include/asm/scatterlist_32.h
index c82609ca1d0f..c82609ca1d0f 100644
--- a/include/asm-sparc/scatterlist_32.h
+++ b/arch/sparc/include/asm/scatterlist_32.h
diff --git a/include/asm-sparc/scatterlist_64.h b/arch/sparc/include/asm/scatterlist_64.h
index 81bd058f9382..81bd058f9382 100644
--- a/include/asm-sparc/scatterlist_64.h
+++ b/arch/sparc/include/asm/scatterlist_64.h
diff --git a/include/asm-sparc/scratchpad.h b/arch/sparc/include/asm/scratchpad.h
index 5e8b01fb3343..5e8b01fb3343 100644
--- a/include/asm-sparc/scratchpad.h
+++ b/arch/sparc/include/asm/scratchpad.h
diff --git a/include/asm-sparc/seccomp.h b/arch/sparc/include/asm/seccomp.h
index 7fcd9968192b..7fcd9968192b 100644
--- a/include/asm-sparc/seccomp.h
+++ b/arch/sparc/include/asm/seccomp.h
diff --git a/arch/sparc/include/asm/sections.h b/arch/sparc/include/asm/sections.h
new file mode 100644
index 000000000000..c7c69b00967f
--- /dev/null
+++ b/arch/sparc/include/asm/sections.h
@@ -0,0 +1,8 @@
+#ifndef ___ASM_SPARC_SECTIONS_H
+#define ___ASM_SPARC_SECTIONS_H
+#if defined(__sparc__) && defined(__arch64__)
+#include <asm/sections_64.h>
+#else
+#include <asm/sections_32.h>
+#endif
+#endif
diff --git a/include/asm-sparc/sections_32.h b/arch/sparc/include/asm/sections_32.h
index 6832841df051..6832841df051 100644
--- a/include/asm-sparc/sections_32.h
+++ b/arch/sparc/include/asm/sections_32.h
diff --git a/include/asm-sparc/sections_64.h b/arch/sparc/include/asm/sections_64.h
index 3f4b9fdc28d0..3f4b9fdc28d0 100644
--- a/include/asm-sparc/sections_64.h
+++ b/arch/sparc/include/asm/sections_64.h
diff --git a/include/asm-sparc/sembuf.h b/arch/sparc/include/asm/sembuf.h
index faee1be08d67..faee1be08d67 100644
--- a/include/asm-sparc/sembuf.h
+++ b/arch/sparc/include/asm/sembuf.h
diff --git a/include/asm-sparc/setup.h b/arch/sparc/include/asm/setup.h
index 2643c62f4ac0..2643c62f4ac0 100644
--- a/include/asm-sparc/setup.h
+++ b/arch/sparc/include/asm/setup.h
diff --git a/include/asm-sparc/sfafsr.h b/arch/sparc/include/asm/sfafsr.h
index e96137b04a4f..e96137b04a4f 100644
--- a/include/asm-sparc/sfafsr.h
+++ b/arch/sparc/include/asm/sfafsr.h
diff --git a/arch/sparc/include/asm/sfp-machine.h b/arch/sparc/include/asm/sfp-machine.h
new file mode 100644
index 000000000000..4ebc3823ed4f
--- /dev/null
+++ b/arch/sparc/include/asm/sfp-machine.h
@@ -0,0 +1,8 @@
+#ifndef ___ASM_SPARC_SFP_MACHINE_H
+#define ___ASM_SPARC_SFP_MACHINE_H
+#if defined(__sparc__) && defined(__arch64__)
+#include <asm/sfp-machine_64.h>
+#else
+#include <asm/sfp-machine_32.h>
+#endif
+#endif
diff --git a/include/asm-sparc/sfp-machine_32.h b/arch/sparc/include/asm/sfp-machine_32.h
index 01d9c3b5a73b..01d9c3b5a73b 100644
--- a/include/asm-sparc/sfp-machine_32.h
+++ b/arch/sparc/include/asm/sfp-machine_32.h
diff --git a/include/asm-sparc/sfp-machine_64.h b/arch/sparc/include/asm/sfp-machine_64.h
index ca913ef40bd5..ca913ef40bd5 100644
--- a/include/asm-sparc/sfp-machine_64.h
+++ b/arch/sparc/include/asm/sfp-machine_64.h
diff --git a/include/asm-sparc/shmbuf.h b/arch/sparc/include/asm/shmbuf.h
index 83a16055363f..83a16055363f 100644
--- a/include/asm-sparc/shmbuf.h
+++ b/arch/sparc/include/asm/shmbuf.h
diff --git a/arch/sparc/include/asm/shmparam.h b/arch/sparc/include/asm/shmparam.h
new file mode 100644
index 000000000000..8bf0cfe0694f
--- /dev/null
+++ b/arch/sparc/include/asm/shmparam.h
@@ -0,0 +1,8 @@
+#ifndef ___ASM_SPARC_SHMPARAM_H
+#define ___ASM_SPARC_SHMPARAM_H
+#if defined(__sparc__) && defined(__arch64__)
+#include <asm/shmparam_64.h>
+#else
+#include <asm/shmparam_32.h>
+#endif
+#endif
diff --git a/include/asm-sparc/shmparam_32.h b/arch/sparc/include/asm/shmparam_32.h
index 59a1243c12f3..59a1243c12f3 100644
--- a/include/asm-sparc/shmparam_32.h
+++ b/arch/sparc/include/asm/shmparam_32.h
diff --git a/include/asm-sparc/shmparam_64.h b/arch/sparc/include/asm/shmparam_64.h
index 1ed0d6701a9b..1ed0d6701a9b 100644
--- a/include/asm-sparc/shmparam_64.h
+++ b/arch/sparc/include/asm/shmparam_64.h
diff --git a/arch/sparc/include/asm/sigcontext.h b/arch/sparc/include/asm/sigcontext.h
new file mode 100644
index 000000000000..e92de7e286b5
--- /dev/null
+++ b/arch/sparc/include/asm/sigcontext.h
@@ -0,0 +1,8 @@
+#ifndef ___ASM_SPARC_SIGCONTEXT_H
+#define ___ASM_SPARC_SIGCONTEXT_H
+#if defined(__sparc__) && defined(__arch64__)
+#include <asm/sigcontext_64.h>
+#else
+#include <asm/sigcontext_32.h>
+#endif
+#endif
diff --git a/include/asm-sparc/sigcontext_32.h b/arch/sparc/include/asm/sigcontext_32.h
index c5fb60dcbd75..c5fb60dcbd75 100644
--- a/include/asm-sparc/sigcontext_32.h
+++ b/arch/sparc/include/asm/sigcontext_32.h
diff --git a/include/asm-sparc/sigcontext_64.h b/arch/sparc/include/asm/sigcontext_64.h
index 1c868d680cfc..1c868d680cfc 100644
--- a/include/asm-sparc/sigcontext_64.h
+++ b/arch/sparc/include/asm/sigcontext_64.h
diff --git a/arch/sparc/include/asm/siginfo.h b/arch/sparc/include/asm/siginfo.h
new file mode 100644
index 000000000000..bd81f8d7f5ce
--- /dev/null
+++ b/arch/sparc/include/asm/siginfo.h
@@ -0,0 +1,8 @@
+#ifndef ___ASM_SPARC_SIGINFO_H
+#define ___ASM_SPARC_SIGINFO_H
+#if defined(__sparc__) && defined(__arch64__)
+#include <asm/siginfo_64.h>
+#else
+#include <asm/siginfo_32.h>
+#endif
+#endif
diff --git a/include/asm-sparc/siginfo_32.h b/arch/sparc/include/asm/siginfo_32.h
index 3c71af135c52..3c71af135c52 100644
--- a/include/asm-sparc/siginfo_32.h
+++ b/arch/sparc/include/asm/siginfo_32.h
diff --git a/include/asm-sparc/siginfo_64.h b/arch/sparc/include/asm/siginfo_64.h
index c96e6c30f8b0..c96e6c30f8b0 100644
--- a/include/asm-sparc/siginfo_64.h
+++ b/arch/sparc/include/asm/siginfo_64.h
diff --git a/arch/sparc/include/asm/signal.h b/arch/sparc/include/asm/signal.h
new file mode 100644
index 000000000000..27ab05dc203e
--- /dev/null
+++ b/arch/sparc/include/asm/signal.h
@@ -0,0 +1,8 @@
+#ifndef ___ASM_SPARC_SIGNAL_H
+#define ___ASM_SPARC_SIGNAL_H
+#if defined(__sparc__) && defined(__arch64__)
+#include <asm/signal_64.h>
+#else
+#include <asm/signal_32.h>
+#endif
+#endif
diff --git a/include/asm-sparc/signal_32.h b/arch/sparc/include/asm/signal_32.h
index 96a60ab03ca1..96a60ab03ca1 100644
--- a/include/asm-sparc/signal_32.h
+++ b/arch/sparc/include/asm/signal_32.h
diff --git a/include/asm-sparc/signal_64.h b/arch/sparc/include/asm/signal_64.h
index ab1509a101c5..ab1509a101c5 100644
--- a/include/asm-sparc/signal_64.h
+++ b/arch/sparc/include/asm/signal_64.h
diff --git a/arch/sparc/include/asm/smp.h b/arch/sparc/include/asm/smp.h
new file mode 100644
index 000000000000..b59672d0e19b
--- /dev/null
+++ b/arch/sparc/include/asm/smp.h
@@ -0,0 +1,8 @@
+#ifndef ___ASM_SPARC_SMP_H
+#define ___ASM_SPARC_SMP_H
+#if defined(__sparc__) && defined(__arch64__)
+#include <asm/smp_64.h>
+#else
+#include <asm/smp_32.h>
+#endif
+#endif
diff --git a/include/asm-sparc/smp_32.h b/arch/sparc/include/asm/smp_32.h
index 7201752cf934..a8180e546a48 100644
--- a/include/asm-sparc/smp_32.h
+++ b/arch/sparc/include/asm/smp_32.h
@@ -50,27 +50,24 @@ struct seq_file;
 void smp_bogo(struct seq_file *);
 void smp_info(struct seq_file *);
 
-BTFIXUPDEF_CALL(void, smp_cross_call, smpfunc_t, unsigned long, unsigned long, unsigned long, unsigned long, unsigned long)
+BTFIXUPDEF_CALL(void, smp_cross_call, smpfunc_t, cpumask_t, unsigned long, unsigned long, unsigned long, unsigned long)
 BTFIXUPDEF_CALL(int, __hard_smp_processor_id, void)
 BTFIXUPDEF_BLACKBOX(hard_smp_processor_id)
 BTFIXUPDEF_BLACKBOX(load_current)
 
-#define smp_cross_call(func,arg1,arg2,arg3,arg4,arg5) BTFIXUP_CALL(smp_cross_call)(func,arg1,arg2,arg3,arg4,arg5)
+#define smp_cross_call(func,mask,arg1,arg2,arg3,arg4) BTFIXUP_CALL(smp_cross_call)(func,mask,arg1,arg2,arg3,arg4)
 
-static inline void xc0(smpfunc_t func) { smp_cross_call(func, 0, 0, 0, 0, 0); }
+static inline void xc0(smpfunc_t func) { smp_cross_call(func, cpu_online_map, 0, 0, 0, 0); }
 static inline void xc1(smpfunc_t func, unsigned long arg1)
-{ smp_cross_call(func, arg1, 0, 0, 0, 0); }
+{ smp_cross_call(func, cpu_online_map, arg1, 0, 0, 0); }
 static inline void xc2(smpfunc_t func, unsigned long arg1, unsigned long arg2)
-{ smp_cross_call(func, arg1, arg2, 0, 0, 0); }
+{ smp_cross_call(func, cpu_online_map, arg1, arg2, 0, 0); }
 static inline void xc3(smpfunc_t func, unsigned long arg1, unsigned long arg2,
 			   unsigned long arg3)
-{ smp_cross_call(func, arg1, arg2, arg3, 0, 0); }
+{ smp_cross_call(func, cpu_online_map, arg1, arg2, arg3, 0); }
 static inline void xc4(smpfunc_t func, unsigned long arg1, unsigned long arg2,
 			   unsigned long arg3, unsigned long arg4)
-{ smp_cross_call(func, arg1, arg2, arg3, arg4, 0); }
-static inline void xc5(smpfunc_t func, unsigned long arg1, unsigned long arg2,
-			   unsigned long arg3, unsigned long arg4, unsigned long arg5)
-{ smp_cross_call(func, arg1, arg2, arg3, arg4, arg5); }
+{ smp_cross_call(func, cpu_online_map, arg1, arg2, arg3, arg4); }
 
 static inline int smp_call_function(void (*func)(void *info), void *info, int wait)
 {
@@ -78,6 +75,14 @@ static inline int smp_call_function(void (*func)(void *info), void *info, int wa
 	return 0;
 }
 
+static inline int smp_call_function_single(int cpuid, void (*func) (void *info),
+					   void *info, int wait)
+{
+	smp_cross_call((smpfunc_t)func, cpumask_of_cpu(cpuid),
+		       (unsigned long) info, 0, 0, 0);
+	return 0;
+}
+
 static inline int cpu_logical_map(int cpu)
 {
 	return cpu;
diff --git a/include/asm-sparc/smp_64.h b/arch/sparc/include/asm/smp_64.h
index 57224dd37b3a..57224dd37b3a 100644
--- a/include/asm-sparc/smp_64.h
+++ b/arch/sparc/include/asm/smp_64.h
diff --git a/include/asm-sparc/smpprim.h b/arch/sparc/include/asm/smpprim.h
index eb849d862c64..eb849d862c64 100644
--- a/include/asm-sparc/smpprim.h
+++ b/arch/sparc/include/asm/smpprim.h
diff --git a/include/asm-sparc/socket.h b/arch/sparc/include/asm/socket.h
index bf50d0c2d583..bf50d0c2d583 100644
--- a/include/asm-sparc/socket.h
+++ b/arch/sparc/include/asm/socket.h
diff --git a/include/asm-sparc/sockios.h b/arch/sparc/include/asm/sockios.h
index 990ea746486b..990ea746486b 100644
--- a/include/asm-sparc/sockios.h
+++ b/arch/sparc/include/asm/sockios.h
diff --git a/include/asm-sparc/sparsemem.h b/arch/sparc/include/asm/sparsemem.h
index b99d4e4b6d28..b99d4e4b6d28 100644
--- a/include/asm-sparc/sparsemem.h
+++ b/arch/sparc/include/asm/sparsemem.h
diff --git a/arch/sparc/include/asm/spinlock.h b/arch/sparc/include/asm/spinlock.h
new file mode 100644
index 000000000000..f276b0036b2c
--- /dev/null
+++ b/arch/sparc/include/asm/spinlock.h
@@ -0,0 +1,8 @@
+#ifndef ___ASM_SPARC_SPINLOCK_H
+#define ___ASM_SPARC_SPINLOCK_H
+#if defined(__sparc__) && defined(__arch64__)
+#include <asm/spinlock_64.h>
+#else
+#include <asm/spinlock_32.h>
+#endif
+#endif
diff --git a/include/asm-sparc/spinlock_32.h b/arch/sparc/include/asm/spinlock_32.h
index de2249b267c6..de2249b267c6 100644
--- a/include/asm-sparc/spinlock_32.h
+++ b/arch/sparc/include/asm/spinlock_32.h
diff --git a/include/asm-sparc/spinlock_64.h b/arch/sparc/include/asm/spinlock_64.h
index 0006fe9f8c7a..0006fe9f8c7a 100644
--- a/include/asm-sparc/spinlock_64.h
+++ b/arch/sparc/include/asm/spinlock_64.h
diff --git a/include/asm-sparc/spinlock_types.h b/arch/sparc/include/asm/spinlock_types.h
index 37cbe01c585b..37cbe01c585b 100644
--- a/include/asm-sparc/spinlock_types.h
+++ b/arch/sparc/include/asm/spinlock_types.h
diff --git a/include/asm-sparc/spitfire.h b/arch/sparc/include/asm/spitfire.h
index 985ea7e31992..985ea7e31992 100644
--- a/include/asm-sparc/spitfire.h
+++ b/arch/sparc/include/asm/spitfire.h
diff --git a/include/asm-sparc/sstate.h b/arch/sparc/include/asm/sstate.h
index a7c35dbcb281..a7c35dbcb281 100644
--- a/include/asm-sparc/sstate.h
+++ b/arch/sparc/include/asm/sstate.h
diff --git a/include/asm-sparc/stacktrace.h b/arch/sparc/include/asm/stacktrace.h
index 6cee39adf6d6..6cee39adf6d6 100644
--- a/include/asm-sparc/stacktrace.h
+++ b/arch/sparc/include/asm/stacktrace.h
diff --git a/include/asm-sparc/starfire.h b/arch/sparc/include/asm/starfire.h
index 07bafd31e33c..07bafd31e33c 100644
--- a/include/asm-sparc/starfire.h
+++ b/arch/sparc/include/asm/starfire.h
diff --git a/arch/sparc/include/asm/stat.h b/arch/sparc/include/asm/stat.h
new file mode 100644
index 000000000000..d8153013df72
--- /dev/null
+++ b/arch/sparc/include/asm/stat.h
@@ -0,0 +1,8 @@
+#ifndef ___ASM_SPARC_STAT_H
+#define ___ASM_SPARC_STAT_H
+#if defined(__sparc__) && defined(__arch64__)
+#include <asm/stat_64.h>
+#else
+#include <asm/stat_32.h>
+#endif
+#endif
diff --git a/include/asm-sparc/stat_32.h b/arch/sparc/include/asm/stat_32.h
index 2299e1d5d94c..2299e1d5d94c 100644
--- a/include/asm-sparc/stat_32.h
+++ b/arch/sparc/include/asm/stat_32.h
diff --git a/include/asm-sparc/stat_64.h b/arch/sparc/include/asm/stat_64.h
index 9650fdea847f..9650fdea847f 100644
--- a/include/asm-sparc/stat_64.h
+++ b/arch/sparc/include/asm/stat_64.h
diff --git a/arch/sparc/include/asm/statfs.h b/arch/sparc/include/asm/statfs.h
new file mode 100644
index 000000000000..5e937a73743d
--- /dev/null
+++ b/arch/sparc/include/asm/statfs.h
@@ -0,0 +1,8 @@
+#ifndef ___ASM_SPARC_STATFS_H
+#define ___ASM_SPARC_STATFS_H
+#if defined(__sparc__) && defined(__arch64__)
+#include <asm/statfs_64.h>
+#else
+#include <asm/statfs_32.h>
+#endif
+#endif
diff --git a/include/asm-sparc/statfs_32.h b/arch/sparc/include/asm/statfs_32.h
index 304520fa8863..304520fa8863 100644
--- a/include/asm-sparc/statfs_32.h
+++ b/arch/sparc/include/asm/statfs_32.h
diff --git a/include/asm-sparc/statfs_64.h b/arch/sparc/include/asm/statfs_64.h
index 79b3c890a5fa..79b3c890a5fa 100644
--- a/include/asm-sparc/statfs_64.h
+++ b/arch/sparc/include/asm/statfs_64.h
diff --git a/arch/sparc/include/asm/string.h b/arch/sparc/include/asm/string.h
new file mode 100644
index 000000000000..98b72a0c8e6e
--- /dev/null
+++ b/arch/sparc/include/asm/string.h
@@ -0,0 +1,8 @@
+#ifndef ___ASM_SPARC_STRING_H
+#define ___ASM_SPARC_STRING_H
+#if defined(__sparc__) && defined(__arch64__)
+#include <asm/string_64.h>
+#else
+#include <asm/string_32.h>
+#endif
+#endif
diff --git a/include/asm-sparc/string_32.h b/arch/sparc/include/asm/string_32.h
index 6c5fddb7e6b5..6c5fddb7e6b5 100644
--- a/include/asm-sparc/string_32.h
+++ b/arch/sparc/include/asm/string_32.h
diff --git a/include/asm-sparc/string_64.h b/arch/sparc/include/asm/string_64.h
index 43161f2d17eb..43161f2d17eb 100644
--- a/include/asm-sparc/string_64.h
+++ b/arch/sparc/include/asm/string_64.h
diff --git a/include/asm-sparc/sun4paddr.h b/arch/sparc/include/asm/sun4paddr.h
index d52985f19f42..d52985f19f42 100644
--- a/include/asm-sparc/sun4paddr.h
+++ b/arch/sparc/include/asm/sun4paddr.h
diff --git a/include/asm-sparc/sun4prom.h b/arch/sparc/include/asm/sun4prom.h
index 9c8b4cbf629a..9c8b4cbf629a 100644
--- a/include/asm-sparc/sun4prom.h
+++ b/arch/sparc/include/asm/sun4prom.h
diff --git a/arch/sparc/include/asm/sunbpp.h b/arch/sparc/include/asm/sunbpp.h
new file mode 100644
index 000000000000..d81a02eaf78b
--- /dev/null
+++ b/arch/sparc/include/asm/sunbpp.h
@@ -0,0 +1,80 @@
+/*
+ * include/asm/sunbpp.h
+ */
+
+#ifndef _ASM_SPARC_SUNBPP_H
+#define _ASM_SPARC_SUNBPP_H
+
+struct bpp_regs {
+  /* DMA registers */
+  __volatile__ __u32 p_csr;		/* DMA Control/Status Register */
+  __volatile__ __u32 p_addr;		/* Address Register */
+  __volatile__ __u32 p_bcnt;		/* Byte Count Register */
+  __volatile__ __u32 p_tst_csr;		/* Test Control/Status (DMA2 only) */
+  /* Parallel Port registers */
+  __volatile__ __u16 p_hcr;		/* Hardware Configuration Register */
+  __volatile__ __u16 p_ocr;		/* Operation Configuration Register */
+  __volatile__ __u8 p_dr;		/* Parallel Data Register */
+  __volatile__ __u8 p_tcr;		/* Transfer Control Register */
+  __volatile__ __u8 p_or;		/* Output Register */
+  __volatile__ __u8 p_ir;		/* Input Register */
+  __volatile__ __u16 p_icr;		/* Interrupt Control Register */
+};
+
+/* P_HCR. Time is in increments of SBus clock. */
+#define P_HCR_TEST      0x8000      /* Allows buried counters to be read */
+#define P_HCR_DSW       0x7f00      /* Data strobe width (in ticks) */
+#define P_HCR_DDS       0x007f      /* Data setup before strobe (in ticks) */
+
+/* P_OCR. */
+#define P_OCR_MEM_CLR   0x8000
+#define P_OCR_DATA_SRC  0x4000      /* )                  */
+#define P_OCR_DS_DSEL   0x2000      /* )  Bidirectional      */
+#define P_OCR_BUSY_DSEL 0x1000      /* )    selects            */
+#define P_OCR_ACK_DSEL  0x0800      /* )                  */
+#define P_OCR_EN_DIAG   0x0400
+#define P_OCR_BUSY_OP   0x0200      /* Busy operation */
+#define P_OCR_ACK_OP    0x0100      /* Ack operation */
+#define P_OCR_SRST      0x0080      /* Reset state machines. Not selfcleaning. */
+#define P_OCR_IDLE      0x0008      /* PP data transfer state machine is idle */
+#define P_OCR_V_ILCK    0x0002      /* Versatec faded. Zebra only. */
+#define P_OCR_EN_VER    0x0001      /* Enable Versatec (0 - enable). Zebra only. */
+
+/* P_TCR */
+#define P_TCR_DIR       0x08
+#define P_TCR_BUSY      0x04
+#define P_TCR_ACK       0x02
+#define P_TCR_DS        0x01        /* Strobe */
+
+/* P_OR */
+#define P_OR_V3         0x20        /* )                 */
+#define P_OR_V2         0x10        /* ) on Zebra only   */
+#define P_OR_V1         0x08        /* )                 */
+#define P_OR_INIT       0x04
+#define P_OR_AFXN       0x02        /* Auto Feed */
+#define P_OR_SLCT_IN    0x01
+
+/* P_IR */
+#define P_IR_PE         0x04
+#define P_IR_SLCT       0x02
+#define P_IR_ERR        0x01
+
+/* P_ICR */
+#define P_DS_IRQ        0x8000      /* RW1  */
+#define P_ACK_IRQ       0x4000      /* RW1  */
+#define P_BUSY_IRQ      0x2000      /* RW1  */
+#define P_PE_IRQ        0x1000      /* RW1  */
+#define P_SLCT_IRQ      0x0800      /* RW1  */
+#define P_ERR_IRQ       0x0400      /* RW1  */
+#define P_DS_IRQ_EN     0x0200      /* RW   Always on rising edge */
+#define P_ACK_IRQ_EN    0x0100      /* RW   Always on rising edge */
+#define P_BUSY_IRP      0x0080      /* RW   1= rising edge */
+#define P_BUSY_IRQ_EN   0x0040      /* RW   */
+#define P_PE_IRP        0x0020      /* RW   1= rising edge */
+#define P_PE_IRQ_EN     0x0010      /* RW   */
+#define P_SLCT_IRP      0x0008      /* RW   1= rising edge */
+#define P_SLCT_IRQ_EN   0x0004      /* RW   */
+#define P_ERR_IRP       0x0002      /* RW1  1= rising edge */
+#define P_ERR_IRQ_EN    0x0001      /* RW   */
+
+#endif /* !(_ASM_SPARC_SUNBPP_H) */
diff --git a/include/asm-sparc/swift.h b/arch/sparc/include/asm/swift.h
index e535061bf755..e535061bf755 100644
--- a/include/asm-sparc/swift.h
+++ b/arch/sparc/include/asm/swift.h
diff --git a/arch/sparc/include/asm/syscall.h b/arch/sparc/include/asm/syscall.h
new file mode 100644
index 000000000000..7486c605e23c
--- /dev/null
+++ b/arch/sparc/include/asm/syscall.h
@@ -0,0 +1,120 @@
+#ifndef __ASM_SPARC_SYSCALL_H
+#define __ASM_SPARC_SYSCALL_H
+
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <asm/ptrace.h>
+
+/* The system call number is given by the user in %g1 */
+static inline long syscall_get_nr(struct task_struct *task,
+				  struct pt_regs *regs)
+{
+	int syscall_p = pt_regs_is_syscall(regs);
+
+	return (syscall_p ? regs->u_regs[UREG_G1] : -1L);
+}
+
+static inline void syscall_rollback(struct task_struct *task,
+				    struct pt_regs *regs)
+{
+	/* XXX This needs some thought.  On Sparc we don't
+	 * XXX save away the original %o0 value somewhere.
+	 * XXX Instead we hold it in register %l5 at the top
+	 * XXX level trap frame and pass this down to the signal
+	 * XXX dispatch code which is the only place that value
+	 * XXX ever was needed.
+	 */
+}
+
+#ifdef CONFIG_SPARC32
+static inline bool syscall_has_error(struct pt_regs *regs)
+{
+	return (regs->psr & PSR_C) ? true : false;
+}
+static inline void syscall_set_error(struct pt_regs *regs)
+{
+	regs->psr |= PSR_C;
+}
+static inline void syscall_clear_error(struct pt_regs *regs)
+{
+	regs->psr &= ~PSR_C;
+}
+#else
+static inline bool syscall_has_error(struct pt_regs *regs)
+{
+	return (regs->tstate & (TSTATE_XCARRY | TSTATE_ICARRY)) ? true : false;
+}
+static inline void syscall_set_error(struct pt_regs *regs)
+{
+	regs->tstate |= (TSTATE_XCARRY | TSTATE_ICARRY);
+}
+static inline void syscall_clear_error(struct pt_regs *regs)
+{
+	regs->tstate &= ~(TSTATE_XCARRY | TSTATE_ICARRY);
+}
+#endif
+
+static inline long syscall_get_error(struct task_struct *task,
+				     struct pt_regs *regs)
+{
+	long val = regs->u_regs[UREG_I0];
+
+	return (syscall_has_error(regs) ? -val : 0);
+}
+
+static inline long syscall_get_return_value(struct task_struct *task,
+					    struct pt_regs *regs)
+{
+	long val = regs->u_regs[UREG_I0];
+
+	return val;
+}
+
+static inline void syscall_set_return_value(struct task_struct *task,
+					    struct pt_regs *regs,
+					    int error, long val)
+{
+	if (error) {
+		syscall_set_error(regs);
+		regs->u_regs[UREG_I0] = -error;
+	} else {
+		syscall_clear_error(regs);
+		regs->u_regs[UREG_I0] = val;
+	}
+}
+
+static inline void syscall_get_arguments(struct task_struct *task,
+					 struct pt_regs *regs,
+					 unsigned int i, unsigned int n,
+					 unsigned long *args)
+{
+	int zero_extend = 0;
+	unsigned int j;
+
+#ifdef CONFIG_SPARC64
+	if (test_tsk_thread_flag(task, TIF_32BIT))
+		zero_extend = 1;
+#endif
+
+	for (j = 0; j < n; j++) {
+		unsigned long val = regs->u_regs[UREG_I0 + i + j];
+
+		if (zero_extend)
+			args[j] = (u32) val;
+		else
+			args[j] = val;
+	}
+}
+
+static inline void syscall_set_arguments(struct task_struct *task,
+					 struct pt_regs *regs,
+					 unsigned int i, unsigned int n,
+					 const unsigned long *args)
+{
+	unsigned int j;
+
+	for (j = 0; j < n; j++)
+		regs->u_regs[UREG_I0 + i + j] = args[j];
+}
+
+#endif /* __ASM_SPARC_SYSCALL_H */
diff --git a/include/asm-sparc/syscalls.h b/arch/sparc/include/asm/syscalls.h
index 45a43f637a14..45a43f637a14 100644
--- a/include/asm-sparc/syscalls.h
+++ b/arch/sparc/include/asm/syscalls.h
diff --git a/include/asm-sparc/sysen.h b/arch/sparc/include/asm/sysen.h
index 6af34abde6e7..6af34abde6e7 100644
--- a/include/asm-sparc/sysen.h
+++ b/arch/sparc/include/asm/sysen.h
diff --git a/arch/sparc/include/asm/system.h b/arch/sparc/include/asm/system.h
new file mode 100644
index 000000000000..7944a7cfc996
--- /dev/null
+++ b/arch/sparc/include/asm/system.h
@@ -0,0 +1,8 @@
+#ifndef ___ASM_SPARC_SYSTEM_H
+#define ___ASM_SPARC_SYSTEM_H
+#if defined(__sparc__) && defined(__arch64__)
+#include <asm/system_64.h>
+#else
+#include <asm/system_32.h>
+#endif
+#endif
diff --git a/include/asm-sparc/system_32.h b/arch/sparc/include/asm/system_32.h
index b4b024445fc9..b4b024445fc9 100644
--- a/include/asm-sparc/system_32.h
+++ b/arch/sparc/include/asm/system_32.h
diff --git a/include/asm-sparc/system_64.h b/arch/sparc/include/asm/system_64.h
index db9e742a406a..db9e742a406a 100644
--- a/include/asm-sparc/system_64.h
+++ b/arch/sparc/include/asm/system_64.h
diff --git a/include/asm-sparc/termbits.h b/arch/sparc/include/asm/termbits.h
index d6ca3e2754f5..d6ca3e2754f5 100644
--- a/include/asm-sparc/termbits.h
+++ b/arch/sparc/include/asm/termbits.h
diff --git a/include/asm-sparc/termios.h b/arch/sparc/include/asm/termios.h
index e8ba95399643..e8ba95399643 100644
--- a/include/asm-sparc/termios.h
+++ b/arch/sparc/include/asm/termios.h
diff --git a/arch/sparc/include/asm/thread_info.h b/arch/sparc/include/asm/thread_info.h
new file mode 100644
index 000000000000..122d7acc07e6
--- /dev/null
+++ b/arch/sparc/include/asm/thread_info.h
@@ -0,0 +1,8 @@
+#ifndef ___ASM_SPARC_THREAD_INFO_H
+#define ___ASM_SPARC_THREAD_INFO_H
+#if defined(__sparc__) && defined(__arch64__)
+#include <asm/thread_info_64.h>
+#else
+#include <asm/thread_info_32.h>
+#endif
+#endif
diff --git a/include/asm-sparc/thread_info_32.h b/arch/sparc/include/asm/thread_info_32.h
index 91b9f5888c85..cbb892d0dff0 100644
--- a/include/asm-sparc/thread_info_32.h
+++ b/arch/sparc/include/asm/thread_info_32.h
@@ -86,6 +86,8 @@ register struct thread_info *current_thread_info_reg asm("g6");
 #define THREAD_INFO_ORDER  1
 #endif
 
+#define __HAVE_ARCH_THREAD_INFO_ALLOCATOR
+
 BTFIXUPDEF_CALL(struct thread_info *, alloc_thread_info, void)
 #define alloc_thread_info(tsk) BTFIXUP_CALL(alloc_thread_info)()
 
@@ -128,7 +130,7 @@ BTFIXUPDEF_CALL(void, free_thread_info, struct thread_info *)
  * thread information flag bit numbers
  */
 #define TIF_SYSCALL_TRACE	0	/* syscall trace active */
-/* flag bit 1 is available */
+#define TIF_NOTIFY_RESUME	1	/* callback before returning to user */
 #define TIF_SIGPENDING		2	/* signal pending */
 #define TIF_NEED_RESCHED	3	/* rescheduling necessary */
 #define TIF_RESTORE_SIGMASK	4	/* restore signal mask in do_signal() */
@@ -140,12 +142,17 @@ BTFIXUPDEF_CALL(void, free_thread_info, struct thread_info *)
 
 /* as above, but as bit values */
 #define _TIF_SYSCALL_TRACE	(1<<TIF_SYSCALL_TRACE)
+#define _TIF_NOTIFY_RESUME	(1<<TIF_NOTIFY_RESUME)
 #define _TIF_SIGPENDING		(1<<TIF_SIGPENDING)
 #define _TIF_NEED_RESCHED	(1<<TIF_NEED_RESCHED)
 #define _TIF_RESTORE_SIGMASK	(1<<TIF_RESTORE_SIGMASK)
 #define _TIF_USEDFPU		(1<<TIF_USEDFPU)
 #define _TIF_POLLING_NRFLAG	(1<<TIF_POLLING_NRFLAG)
 
+#define _TIF_DO_NOTIFY_RESUME_MASK	(_TIF_NOTIFY_RESUME | \
+					 _TIF_SIGPENDING | \
+					 _TIF_RESTORE_SIGMASK)
+
 #endif /* __KERNEL__ */
 
 #endif /* _ASM_THREAD_INFO_H */
diff --git a/include/asm-sparc/thread_info_64.h b/arch/sparc/include/asm/thread_info_64.h
index c6d2e6c7f844..c0a737d7292c 100644
--- a/include/asm-sparc/thread_info_64.h
+++ b/arch/sparc/include/asm/thread_info_64.h
@@ -155,6 +155,8 @@ register struct thread_info *current_thread_info_reg asm("g6");
 #define __THREAD_INFO_ORDER	0
 #endif /* PAGE_SHIFT == 13 */
 
+#define __HAVE_ARCH_THREAD_INFO_ALLOCATOR
+
 #ifdef CONFIG_DEBUG_STACK_USAGE
 #define alloc_thread_info(tsk)					\
 ({								\
@@ -217,7 +219,7 @@ register struct thread_info *current_thread_info_reg asm("g6");
  *	 nop
  */
 #define TIF_SYSCALL_TRACE	0	/* syscall trace active */
-/* flags bit 1 is available */
+#define TIF_NOTIFY_RESUME	1	/* callback before returning to user */
 #define TIF_SIGPENDING		2	/* signal pending */
 #define TIF_NEED_RESCHED	3	/* rescheduling necessary */
 #define TIF_PERFCTR		4	/* performance counters active */
@@ -237,6 +239,7 @@ register struct thread_info *current_thread_info_reg asm("g6");
 #define TIF_POLLING_NRFLAG	14
 
 #define _TIF_SYSCALL_TRACE	(1<<TIF_SYSCALL_TRACE)
+#define _TIF_NOTIFY_RESUME	(1<<TIF_NOTIFY_RESUME)
 #define _TIF_SIGPENDING		(1<<TIF_SIGPENDING)
 #define _TIF_NEED_RESCHED	(1<<TIF_NEED_RESCHED)
 #define _TIF_PERFCTR		(1<<TIF_PERFCTR)
@@ -248,8 +251,9 @@ register struct thread_info *current_thread_info_reg asm("g6");
 #define _TIF_POLLING_NRFLAG	(1<<TIF_POLLING_NRFLAG)
 
 #define _TIF_USER_WORK_MASK	((0xff << TI_FLAG_WSAVED_SHIFT) | \
-				 (_TIF_SIGPENDING | \
-				  _TIF_NEED_RESCHED | _TIF_PERFCTR))
+				 _TIF_DO_NOTIFY_RESUME_MASK | \
+				 _TIF_NEED_RESCHED | _TIF_PERFCTR)
+#define _TIF_DO_NOTIFY_RESUME_MASK	(_TIF_NOTIFY_RESUME | _TIF_SIGPENDING)
 
 /*
  * Thread-synchronous status.
diff --git a/arch/sparc/include/asm/timer.h b/arch/sparc/include/asm/timer.h
new file mode 100644
index 000000000000..612fd2779d9e
--- /dev/null
+++ b/arch/sparc/include/asm/timer.h
@@ -0,0 +1,8 @@
+#ifndef ___ASM_SPARC_TIMER_H
+#define ___ASM_SPARC_TIMER_H
+#if defined(__sparc__) && defined(__arch64__)
+#include <asm/timer_64.h>
+#else
+#include <asm/timer_32.h>
+#endif
+#endif
diff --git a/include/asm-sparc/timer_32.h b/arch/sparc/include/asm/timer_32.h
index 361e53898dd7..361e53898dd7 100644
--- a/include/asm-sparc/timer_32.h
+++ b/arch/sparc/include/asm/timer_32.h
diff --git a/include/asm-sparc/timer_64.h b/arch/sparc/include/asm/timer_64.h
index 5b779fd1f788..5b779fd1f788 100644
--- a/include/asm-sparc/timer_64.h
+++ b/arch/sparc/include/asm/timer_64.h
diff --git a/arch/sparc/include/asm/timex.h b/arch/sparc/include/asm/timex.h
new file mode 100644
index 000000000000..70cc37b73827
--- /dev/null
+++ b/arch/sparc/include/asm/timex.h
@@ -0,0 +1,8 @@
+#ifndef ___ASM_SPARC_TIMEX_H
+#define ___ASM_SPARC_TIMEX_H
+#if defined(__sparc__) && defined(__arch64__)
+#include <asm/timex_64.h>
+#else
+#include <asm/timex_32.h>
+#endif
+#endif
diff --git a/include/asm-sparc/timex_32.h b/arch/sparc/include/asm/timex_32.h
index 71b45c90ccae..b6ccdb0d6f7d 100644
--- a/include/asm-sparc/timex_32.h
+++ b/arch/sparc/include/asm/timex_32.h
@@ -1,5 +1,5 @@
 /*
- * linux/include/asm-sparc/timex.h
+ * linux/include/asm/timex.h
  *
  * sparc architecture timex specifications
  */
diff --git a/include/asm-sparc/timex_64.h b/arch/sparc/include/asm/timex_64.h
index c622535c4560..18b30bc9823b 100644
--- a/include/asm-sparc/timex_64.h
+++ b/arch/sparc/include/asm/timex_64.h
@@ -1,5 +1,5 @@
 /*
- * linux/include/asm-sparc64/timex.h
+ * linux/include/asm/timex.h
  *
  * sparc64 architecture timex specifications
  */
diff --git a/arch/sparc/include/asm/tlb.h b/arch/sparc/include/asm/tlb.h
new file mode 100644
index 000000000000..92d0393bbcdc
--- /dev/null
+++ b/arch/sparc/include/asm/tlb.h
@@ -0,0 +1,8 @@
+#ifndef ___ASM_SPARC_TLB_H
+#define ___ASM_SPARC_TLB_H
+#if defined(__sparc__) && defined(__arch64__)
+#include <asm/tlb_64.h>
+#else
+#include <asm/tlb_32.h>
+#endif
+#endif
diff --git a/include/asm-sparc/tlb_32.h b/arch/sparc/include/asm/tlb_32.h
index 6d02d1ce53f3..6d02d1ce53f3 100644
--- a/include/asm-sparc/tlb_32.h
+++ b/arch/sparc/include/asm/tlb_32.h
diff --git a/include/asm-sparc/tlb_64.h b/arch/sparc/include/asm/tlb_64.h
index ec81cdedef2c..ec81cdedef2c 100644
--- a/include/asm-sparc/tlb_64.h
+++ b/arch/sparc/include/asm/tlb_64.h
diff --git a/arch/sparc/include/asm/tlbflush.h b/arch/sparc/include/asm/tlbflush.h
new file mode 100644
index 000000000000..2c9629fad1e2
--- /dev/null
+++ b/arch/sparc/include/asm/tlbflush.h
@@ -0,0 +1,8 @@
+#ifndef ___ASM_SPARC_TLBFLUSH_H
+#define ___ASM_SPARC_TLBFLUSH_H
+#if defined(__sparc__) && defined(__arch64__)
+#include <asm/tlbflush_64.h>
+#else
+#include <asm/tlbflush_32.h>
+#endif
+#endif
diff --git a/include/asm-sparc/tlbflush_32.h b/arch/sparc/include/asm/tlbflush_32.h
index fe0a71abc9bb..fe0a71abc9bb 100644
--- a/include/asm-sparc/tlbflush_32.h
+++ b/arch/sparc/include/asm/tlbflush_32.h
diff --git a/include/asm-sparc/tlbflush_64.h b/arch/sparc/include/asm/tlbflush_64.h
index fbb675dbe0c9..fbb675dbe0c9 100644
--- a/include/asm-sparc/tlbflush_64.h
+++ b/arch/sparc/include/asm/tlbflush_64.h
diff --git a/arch/sparc/include/asm/topology.h b/arch/sparc/include/asm/topology.h
new file mode 100644
index 000000000000..ee4f191d394a
--- /dev/null
+++ b/arch/sparc/include/asm/topology.h
@@ -0,0 +1,8 @@
+#ifndef ___ASM_SPARC_TOPOLOGY_H
+#define ___ASM_SPARC_TOPOLOGY_H
+#if defined(__sparc__) && defined(__arch64__)
+#include <asm/topology_64.h>
+#else
+#include <asm/topology_32.h>
+#endif
+#endif
diff --git a/include/asm-sparc/topology_32.h b/arch/sparc/include/asm/topology_32.h
index ee5ac9c9da28..ee5ac9c9da28 100644
--- a/include/asm-sparc/topology_32.h
+++ b/arch/sparc/include/asm/topology_32.h
diff --git a/include/asm-sparc/topology_64.h b/arch/sparc/include/asm/topology_64.h
index 001c04027c82..001c04027c82 100644
--- a/include/asm-sparc/topology_64.h
+++ b/arch/sparc/include/asm/topology_64.h
diff --git a/include/asm-sparc/traps.h b/arch/sparc/include/asm/traps.h
index bebdbf8f43a8..bebdbf8f43a8 100644
--- a/include/asm-sparc/traps.h
+++ b/arch/sparc/include/asm/traps.h
diff --git a/include/asm-sparc/tsb.h b/arch/sparc/include/asm/tsb.h
index 76e4299dd9bc..76e4299dd9bc 100644
--- a/include/asm-sparc/tsb.h
+++ b/arch/sparc/include/asm/tsb.h
diff --git a/include/asm-sparc/tsunami.h b/arch/sparc/include/asm/tsunami.h
index 5bbd1d523baa..5bbd1d523baa 100644
--- a/include/asm-sparc/tsunami.h
+++ b/arch/sparc/include/asm/tsunami.h
diff --git a/include/asm-sparc/ttable.h b/arch/sparc/include/asm/ttable.h
index 5708ba2719fb..5708ba2719fb 100644
--- a/include/asm-sparc/ttable.h
+++ b/arch/sparc/include/asm/ttable.h
diff --git a/include/asm-sparc/turbosparc.h b/arch/sparc/include/asm/turbosparc.h
index 17c73282db0a..17c73282db0a 100644
--- a/include/asm-sparc/turbosparc.h
+++ b/arch/sparc/include/asm/turbosparc.h
diff --git a/include/asm-sparc/types.h b/arch/sparc/include/asm/types.h
index 8c28fde5eaa2..8c28fde5eaa2 100644
--- a/include/asm-sparc/types.h
+++ b/arch/sparc/include/asm/types.h
diff --git a/arch/sparc/include/asm/uaccess.h b/arch/sparc/include/asm/uaccess.h
new file mode 100644
index 000000000000..e88fbe5c0457
--- /dev/null
+++ b/arch/sparc/include/asm/uaccess.h
@@ -0,0 +1,8 @@
+#ifndef ___ASM_SPARC_UACCESS_H
+#define ___ASM_SPARC_UACCESS_H
+#if defined(__sparc__) && defined(__arch64__)
+#include <asm/uaccess_64.h>
+#else
+#include <asm/uaccess_32.h>
+#endif
+#endif
diff --git a/include/asm-sparc/uaccess_32.h b/arch/sparc/include/asm/uaccess_32.h
index 47d5619d43fa..47d5619d43fa 100644
--- a/include/asm-sparc/uaccess_32.h
+++ b/arch/sparc/include/asm/uaccess_32.h
diff --git a/include/asm-sparc/uaccess_64.h b/arch/sparc/include/asm/uaccess_64.h
index 296ef30e05c8..296ef30e05c8 100644
--- a/include/asm-sparc/uaccess_64.h
+++ b/arch/sparc/include/asm/uaccess_64.h
diff --git a/include/asm-sparc/uctx.h b/arch/sparc/include/asm/uctx.h
index dc937c75ffdd..dc937c75ffdd 100644
--- a/include/asm-sparc/uctx.h
+++ b/arch/sparc/include/asm/uctx.h
diff --git a/include/asm-sparc/unaligned.h b/arch/sparc/include/asm/unaligned.h
index 11d2d5fb5902..11d2d5fb5902 100644
--- a/include/asm-sparc/unaligned.h
+++ b/arch/sparc/include/asm/unaligned.h
diff --git a/arch/sparc/include/asm/unistd.h b/arch/sparc/include/asm/unistd.h
new file mode 100644
index 000000000000..4207fb362da0
--- /dev/null
+++ b/arch/sparc/include/asm/unistd.h
@@ -0,0 +1,8 @@
+#ifndef ___ASM_SPARC_UNISTD_H
+#define ___ASM_SPARC_UNISTD_H
+#if defined(__sparc__) && defined(__arch64__)
+#include <asm/unistd_64.h>
+#else
+#include <asm/unistd_32.h>
+#endif
+#endif
diff --git a/arch/sparc/include/asm/unistd_32.h b/arch/sparc/include/asm/unistd_32.h
new file mode 100644
index 000000000000..648643a9f139
--- /dev/null
+++ b/arch/sparc/include/asm/unistd_32.h
@@ -0,0 +1,384 @@
+#ifndef _SPARC_UNISTD_H
+#define _SPARC_UNISTD_H
+
+/*
+ * System calls under the Sparc.
+ *
+ * Don't be scared by the ugly clobbers, it is the only way I can
+ * think of right now to force the arguments into fixed registers
+ * before the trap into the system call with gcc 'asm' statements.
+ *
+ * Copyright (C) 1995, 2007 David S. Miller (davem@davemloft.net)
+ *
+ * SunOS compatibility based upon preliminary work which is:
+ *
+ * Copyright (C) 1995 Adrian M. Rodriguez (adrian@remus.rutgers.edu)
+ */
+
+#define __NR_restart_syscall      0 /* Linux Specific				   */
+#define __NR_exit                 1 /* Common                                      */
+#define __NR_fork                 2 /* Common                                      */
+#define __NR_read                 3 /* Common                                      */
+#define __NR_write                4 /* Common                                      */
+#define __NR_open                 5 /* Common                                      */
+#define __NR_close                6 /* Common                                      */
+#define __NR_wait4                7 /* Common                                      */
+#define __NR_creat                8 /* Common                                      */
+#define __NR_link                 9 /* Common                                      */
+#define __NR_unlink              10 /* Common                                      */
+#define __NR_execv               11 /* SunOS Specific                              */
+#define __NR_chdir               12 /* Common                                      */
+#define __NR_chown		 13 /* Common					   */
+#define __NR_mknod               14 /* Common                                      */
+#define __NR_chmod               15 /* Common                                      */
+#define __NR_lchown              16 /* Common                                      */
+#define __NR_brk                 17 /* Common                                      */
+#define __NR_perfctr             18 /* Performance counter operations              */
+#define __NR_lseek               19 /* Common                                      */
+#define __NR_getpid              20 /* Common                                      */
+#define __NR_capget		 21 /* Linux Specific				   */
+#define __NR_capset		 22 /* Linux Specific				   */
+#define __NR_setuid              23 /* Implemented via setreuid in SunOS           */
+#define __NR_getuid              24 /* Common                                      */
+#define __NR_vmsplice	         25 /* ENOSYS under SunOS			   */
+#define __NR_ptrace              26 /* Common                                      */
+#define __NR_alarm               27 /* Implemented via setitimer in SunOS          */
+#define __NR_sigaltstack	 28 /* Common					   */
+#define __NR_pause               29 /* Is sigblock(0)->sigpause() in SunOS         */
+#define __NR_utime               30 /* Implemented via utimes() under SunOS        */
+#define __NR_lchown32            31 /* Linux sparc32 specific                      */
+#define __NR_fchown32            32 /* Linux sparc32 specific                      */
+#define __NR_access              33 /* Common                                      */
+#define __NR_nice                34 /* Implemented via get/setpriority() in SunOS  */
+#define __NR_chown32             35 /* Linux sparc32 specific                      */
+#define __NR_sync                36 /* Common                                      */
+#define __NR_kill                37 /* Common                                      */
+#define __NR_stat                38 /* Common                                      */
+#define __NR_sendfile		 39 /* Linux Specific				   */
+#define __NR_lstat               40 /* Common                                      */
+#define __NR_dup                 41 /* Common                                      */
+#define __NR_pipe                42 /* Common                                      */
+#define __NR_times               43 /* Implemented via getrusage() in SunOS        */
+#define __NR_getuid32            44 /* Linux sparc32 specific                      */
+#define __NR_umount2             45 /* Linux Specific                              */
+#define __NR_setgid              46 /* Implemented via setregid() in SunOS         */
+#define __NR_getgid              47 /* Common                                      */
+#define __NR_signal              48 /* Implemented via sigvec() in SunOS           */
+#define __NR_geteuid             49 /* SunOS calls getuid()                        */
+#define __NR_getegid             50 /* SunOS calls getgid()                        */
+#define __NR_acct                51 /* Common                                      */
+/* #define __NR_memory_ordering  52    Linux sparc64 specific			   */
+#define __NR_getgid32            53 /* Linux sparc32 specific                      */
+#define __NR_ioctl               54 /* Common                                      */
+#define __NR_reboot              55 /* Common                                      */
+#define __NR_mmap2		 56 /* Linux sparc32 Specific			   */
+#define __NR_symlink             57 /* Common                                      */
+#define __NR_readlink            58 /* Common                                      */
+#define __NR_execve              59 /* Common                                      */
+#define __NR_umask               60 /* Common                                      */
+#define __NR_chroot              61 /* Common                                      */
+#define __NR_fstat               62 /* Common                                      */
+#define __NR_fstat64		 63 /* Linux Specific			           */
+#define __NR_getpagesize         64 /* Common                                      */
+#define __NR_msync               65 /* Common in newer 1.3.x revs...               */
+#define __NR_vfork               66 /* Common                                      */
+#define __NR_pread64             67 /* Linux Specific                              */
+#define __NR_pwrite64            68 /* Linux Specific                              */
+#define __NR_geteuid32           69 /* Linux sparc32, sbrk under SunOS             */
+#define __NR_getegid32           70 /* Linux sparc32, sstk under SunOS             */
+#define __NR_mmap                71 /* Common                                      */
+#define __NR_setreuid32          72 /* Linux sparc32, vadvise under SunOS          */
+#define __NR_munmap              73 /* Common                                      */
+#define __NR_mprotect            74 /* Common                                      */
+#define __NR_madvise             75 /* Common                                      */
+#define __NR_vhangup             76 /* Common                                      */
+#define __NR_truncate64		 77 /* Linux sparc32 Specific			   */
+#define __NR_mincore             78 /* Common                                      */
+#define __NR_getgroups           79 /* Common                                      */
+#define __NR_setgroups           80 /* Common                                      */
+#define __NR_getpgrp             81 /* Common                                      */
+#define __NR_setgroups32         82 /* Linux sparc32, setpgrp under SunOS          */
+#define __NR_setitimer           83 /* Common                                      */
+#define __NR_ftruncate64	 84 /* Linux sparc32 Specific			   */
+#define __NR_swapon              85 /* Common                                      */
+#define __NR_getitimer           86 /* Common                                      */
+#define __NR_setuid32            87 /* Linux sparc32, gethostname under SunOS      */
+#define __NR_sethostname         88 /* Common                                      */
+#define __NR_setgid32            89 /* Linux sparc32, getdtablesize under SunOS    */
+#define __NR_dup2                90 /* Common                                      */
+#define __NR_setfsuid32          91 /* Linux sparc32, getdopt under SunOS          */
+#define __NR_fcntl               92 /* Common                                      */
+#define __NR_select              93 /* Common                                      */
+#define __NR_setfsgid32          94 /* Linux sparc32, setdopt under SunOS          */
+#define __NR_fsync               95 /* Common                                      */
+#define __NR_setpriority         96 /* Common                                      */
+#define __NR_socket              97 /* Common                                      */
+#define __NR_connect             98 /* Common                                      */
+#define __NR_accept              99 /* Common                                      */
+#define __NR_getpriority        100 /* Common                                      */
+#define __NR_rt_sigreturn       101 /* Linux Specific                              */
+#define __NR_rt_sigaction       102 /* Linux Specific                              */
+#define __NR_rt_sigprocmask     103 /* Linux Specific                              */
+#define __NR_rt_sigpending      104 /* Linux Specific                              */
+#define __NR_rt_sigtimedwait    105 /* Linux Specific                              */
+#define __NR_rt_sigqueueinfo    106 /* Linux Specific                              */
+#define __NR_rt_sigsuspend      107 /* Linux Specific                              */
+#define __NR_setresuid32        108 /* Linux Specific, sigvec under SunOS	   */
+#define __NR_getresuid32        109 /* Linux Specific, sigblock under SunOS	   */
+#define __NR_setresgid32        110 /* Linux Specific, sigsetmask under SunOS	   */
+#define __NR_getresgid32        111 /* Linux Specific, sigpause under SunOS	   */
+#define __NR_setregid32         112 /* Linux sparc32, sigstack under SunOS         */
+#define __NR_recvmsg            113 /* Common                                      */
+#define __NR_sendmsg            114 /* Common                                      */
+#define __NR_getgroups32        115 /* Linux sparc32, vtrace under SunOS           */
+#define __NR_gettimeofday       116 /* Common                                      */
+#define __NR_getrusage          117 /* Common                                      */
+#define __NR_getsockopt         118 /* Common                                      */
+#define __NR_getcwd		119 /* Linux Specific				   */
+#define __NR_readv              120 /* Common                                      */
+#define __NR_writev             121 /* Common                                      */
+#define __NR_settimeofday       122 /* Common                                      */
+#define __NR_fchown             123 /* Common                                      */
+#define __NR_fchmod             124 /* Common                                      */
+#define __NR_recvfrom           125 /* Common                                      */
+#define __NR_setreuid           126 /* Common                                      */
+#define __NR_setregid           127 /* Common                                      */
+#define __NR_rename             128 /* Common                                      */
+#define __NR_truncate           129 /* Common                                      */
+#define __NR_ftruncate          130 /* Common                                      */
+#define __NR_flock              131 /* Common                                      */
+#define __NR_lstat64		132 /* Linux Specific			           */
+#define __NR_sendto             133 /* Common                                      */
+#define __NR_shutdown           134 /* Common                                      */
+#define __NR_socketpair         135 /* Common                                      */
+#define __NR_mkdir              136 /* Common                                      */
+#define __NR_rmdir              137 /* Common                                      */
+#define __NR_utimes             138 /* SunOS Specific                              */
+#define __NR_stat64		139 /* Linux Specific			           */
+#define __NR_sendfile64         140 /* adjtime under SunOS                         */
+#define __NR_getpeername        141 /* Common                                      */
+#define __NR_futex              142 /* gethostid under SunOS                       */
+#define __NR_gettid             143 /* ENOSYS under SunOS                          */
+#define __NR_getrlimit          144 /* Common                                      */
+#define __NR_setrlimit          145 /* Common                                      */
+#define __NR_pivot_root		146 /* Linux Specific, killpg under SunOS          */
+#define __NR_prctl		147 /* ENOSYS under SunOS                          */
+#define __NR_pciconfig_read	148 /* ENOSYS under SunOS                          */
+#define __NR_pciconfig_write	149 /* ENOSYS under SunOS                          */
+#define __NR_getsockname        150 /* Common                                      */
+#define __NR_inotify_init       151 /* Linux specific                              */
+#define __NR_inotify_add_watch  152 /* Linux specific                              */
+#define __NR_poll               153 /* Common                                      */
+#define __NR_getdents64		154 /* Linux specific				   */
+#define __NR_fcntl64		155 /* Linux sparc32 Specific                      */
+#define __NR_inotify_rm_watch   156 /* Linux specific				   */
+#define __NR_statfs             157 /* Common                                      */
+#define __NR_fstatfs            158 /* Common                                      */
+#define __NR_umount             159 /* Common                                      */
+#define __NR_sched_set_affinity 160 /* Linux specific, async_daemon under SunOS    */
+#define __NR_sched_get_affinity 161 /* Linux specific, getfh under SunOS           */
+#define __NR_getdomainname      162 /* SunOS Specific                              */
+#define __NR_setdomainname      163 /* Common                                      */
+/* #define __NR_utrap_install   164    Linux sparc64 specific			   */
+#define __NR_quotactl           165 /* Common                                      */
+#define __NR_set_tid_address    166 /* Linux specific, exportfs under SunOS        */
+#define __NR_mount              167 /* Common                                      */
+#define __NR_ustat              168 /* Common                                      */
+#define __NR_setxattr           169 /* SunOS: semsys                               */
+#define __NR_lsetxattr          170 /* SunOS: msgsys                               */
+#define __NR_fsetxattr          171 /* SunOS: shmsys                               */
+#define __NR_getxattr           172 /* SunOS: auditsys                             */
+#define __NR_lgetxattr          173 /* SunOS: rfssys                               */
+#define __NR_getdents           174 /* Common                                      */
+#define __NR_setsid             175 /* Common                                      */
+#define __NR_fchdir             176 /* Common                                      */
+#define __NR_fgetxattr          177 /* SunOS: fchroot                              */
+#define __NR_listxattr          178 /* SunOS: vpixsys                              */
+#define __NR_llistxattr         179 /* SunOS: aioread                              */
+#define __NR_flistxattr         180 /* SunOS: aiowrite                             */
+#define __NR_removexattr        181 /* SunOS: aiowait                              */
+#define __NR_lremovexattr       182 /* SunOS: aiocancel                            */
+#define __NR_sigpending         183 /* Common                                      */
+#define __NR_query_module	184 /* Linux Specific				   */
+#define __NR_setpgid            185 /* Common                                      */
+#define __NR_fremovexattr       186 /* SunOS: pathconf                             */
+#define __NR_tkill              187 /* SunOS: fpathconf                            */
+#define __NR_exit_group		188 /* Linux specific, sysconf undef SunOS         */
+#define __NR_uname              189 /* Linux Specific                              */
+#define __NR_init_module        190 /* Linux Specific                              */
+#define __NR_personality        191 /* Linux Specific                              */
+#define __NR_remap_file_pages   192 /* Linux Specific                              */
+#define __NR_epoll_create       193 /* Linux Specific                              */
+#define __NR_epoll_ctl          194 /* Linux Specific                              */
+#define __NR_epoll_wait         195 /* Linux Specific                              */
+#define __NR_ioprio_set         196 /* Linux Specific                              */
+#define __NR_getppid            197 /* Linux Specific                              */
+#define __NR_sigaction          198 /* Linux Specific                              */
+#define __NR_sgetmask           199 /* Linux Specific                              */
+#define __NR_ssetmask           200 /* Linux Specific                              */
+#define __NR_sigsuspend         201 /* Linux Specific                              */
+#define __NR_oldlstat           202 /* Linux Specific                              */
+#define __NR_uselib             203 /* Linux Specific                              */
+#define __NR_readdir            204 /* Linux Specific                              */
+#define __NR_readahead          205 /* Linux Specific                              */
+#define __NR_socketcall         206 /* Linux Specific                              */
+#define __NR_syslog             207 /* Linux Specific                              */
+#define __NR_lookup_dcookie     208 /* Linux Specific                              */
+#define __NR_fadvise64          209 /* Linux Specific                              */
+#define __NR_fadvise64_64       210 /* Linux Specific                              */
+#define __NR_tgkill             211 /* Linux Specific                              */
+#define __NR_waitpid            212 /* Linux Specific                              */
+#define __NR_swapoff            213 /* Linux Specific                              */
+#define __NR_sysinfo            214 /* Linux Specific                              */
+#define __NR_ipc                215 /* Linux Specific                              */
+#define __NR_sigreturn          216 /* Linux Specific                              */
+#define __NR_clone              217 /* Linux Specific                              */
+#define __NR_ioprio_get         218 /* Linux Specific                              */
+#define __NR_adjtimex           219 /* Linux Specific                              */
+#define __NR_sigprocmask        220 /* Linux Specific                              */
+#define __NR_create_module      221 /* Linux Specific                              */
+#define __NR_delete_module      222 /* Linux Specific                              */
+#define __NR_get_kernel_syms    223 /* Linux Specific                              */
+#define __NR_getpgid            224 /* Linux Specific                              */
+#define __NR_bdflush            225 /* Linux Specific                              */
+#define __NR_sysfs              226 /* Linux Specific                              */
+#define __NR_afs_syscall        227 /* Linux Specific                              */
+#define __NR_setfsuid           228 /* Linux Specific                              */
+#define __NR_setfsgid           229 /* Linux Specific                              */
+#define __NR__newselect         230 /* Linux Specific                              */
+#define __NR_time               231 /* Linux Specific                              */
+#define __NR_splice             232 /* Linux Specific                              */
+#define __NR_stime              233 /* Linux Specific                              */
+#define __NR_statfs64           234 /* Linux Specific                              */
+#define __NR_fstatfs64          235 /* Linux Specific                              */
+#define __NR__llseek            236 /* Linux Specific                              */
+#define __NR_mlock              237
+#define __NR_munlock            238
+#define __NR_mlockall           239
+#define __NR_munlockall         240
+#define __NR_sched_setparam     241
+#define __NR_sched_getparam     242
+#define __NR_sched_setscheduler 243
+#define __NR_sched_getscheduler 244
+#define __NR_sched_yield        245
+#define __NR_sched_get_priority_max 246
+#define __NR_sched_get_priority_min 247
+#define __NR_sched_rr_get_interval  248
+#define __NR_nanosleep          249
+#define __NR_mremap             250
+#define __NR__sysctl            251
+#define __NR_getsid             252
+#define __NR_fdatasync          253
+#define __NR_nfsservctl         254
+#define __NR_sync_file_range	255
+#define __NR_clock_settime	256
+#define __NR_clock_gettime	257
+#define __NR_clock_getres	258
+#define __NR_clock_nanosleep	259
+#define __NR_sched_getaffinity	260
+#define __NR_sched_setaffinity	261
+#define __NR_timer_settime	262
+#define __NR_timer_gettime	263
+#define __NR_timer_getoverrun	264
+#define __NR_timer_delete	265
+#define __NR_timer_create	266
+/* #define __NR_vserver		267 Reserved for VSERVER */
+#define __NR_io_setup		268
+#define __NR_io_destroy		269
+#define __NR_io_submit		270
+#define __NR_io_cancel		271
+#define __NR_io_getevents	272
+#define __NR_mq_open		273
+#define __NR_mq_unlink		274
+#define __NR_mq_timedsend	275
+#define __NR_mq_timedreceive	276
+#define __NR_mq_notify		277
+#define __NR_mq_getsetattr	278
+#define __NR_waitid		279
+#define __NR_tee		280
+#define __NR_add_key		281
+#define __NR_request_key	282
+#define __NR_keyctl		283
+#define __NR_openat		284
+#define __NR_mkdirat		285
+#define __NR_mknodat		286
+#define __NR_fchownat		287
+#define __NR_futimesat		288
+#define __NR_fstatat64		289
+#define __NR_unlinkat		290
+#define __NR_renameat		291
+#define __NR_linkat		292
+#define __NR_symlinkat		293
+#define __NR_readlinkat		294
+#define __NR_fchmodat		295
+#define __NR_faccessat		296
+#define __NR_pselect6		297
+#define __NR_ppoll		298
+#define __NR_unshare		299
+#define __NR_set_robust_list	300
+#define __NR_get_robust_list	301
+#define __NR_migrate_pages	302
+#define __NR_mbind		303
+#define __NR_get_mempolicy	304
+#define __NR_set_mempolicy	305
+#define __NR_kexec_load		306
+#define __NR_move_pages		307
+#define __NR_getcpu		308
+#define __NR_epoll_pwait	309
+#define __NR_utimensat		310
+#define __NR_signalfd		311
+#define __NR_timerfd_create	312
+#define __NR_eventfd		313
+#define __NR_fallocate		314
+#define __NR_timerfd_settime	315
+#define __NR_timerfd_gettime	316
+#define __NR_signalfd4		317
+#define __NR_eventfd2		318
+#define __NR_epoll_create1	319
+#define __NR_dup3		320
+#define __NR_pipe2		321
+#define __NR_inotify_init1	322
+
+#define NR_SYSCALLS		323
+
+/* Sparc 32-bit only has the "setresuid32", "getresuid32" variants,
+ * it never had the plain ones and there is no value to adding those
+ * old versions into the syscall table.
+ */
+#define __IGNORE_setresuid
+#define __IGNORE_getresuid
+#define __IGNORE_setresgid
+#define __IGNORE_getresgid
+
+#ifdef __KERNEL__
+#define __ARCH_WANT_IPC_PARSE_VERSION
+#define __ARCH_WANT_OLD_READDIR
+#define __ARCH_WANT_STAT64
+#define __ARCH_WANT_SYS_ALARM
+#define __ARCH_WANT_SYS_GETHOSTNAME
+#define __ARCH_WANT_SYS_PAUSE
+#define __ARCH_WANT_SYS_SGETMASK
+#define __ARCH_WANT_SYS_SIGNAL
+#define __ARCH_WANT_SYS_TIME
+#define __ARCH_WANT_SYS_UTIME
+#define __ARCH_WANT_SYS_WAITPID
+#define __ARCH_WANT_SYS_SOCKETCALL
+#define __ARCH_WANT_SYS_FADVISE64
+#define __ARCH_WANT_SYS_GETPGRP
+#define __ARCH_WANT_SYS_LLSEEK
+#define __ARCH_WANT_SYS_NICE
+#define __ARCH_WANT_SYS_OLDUMOUNT
+#define __ARCH_WANT_SYS_SIGPENDING
+#define __ARCH_WANT_SYS_SIGPROCMASK
+#define __ARCH_WANT_SYS_RT_SIGSUSPEND
+
+/*
+ * "Conditional" syscalls
+ *
+ * What we want is __attribute__((weak,alias("sys_ni_syscall"))),
+ * but it doesn't work on all toolchains, so we just do it by hand
+ */
+#define cond_syscall(x) asm(".weak\t" #x "\n\t.set\t" #x ",sys_ni_syscall")
+
+#endif /* __KERNEL__ */
+#endif /* _SPARC_UNISTD_H */
diff --git a/arch/sparc/include/asm/unistd_64.h b/arch/sparc/include/asm/unistd_64.h
new file mode 100644
index 000000000000..c5cc0e052321
--- /dev/null
+++ b/arch/sparc/include/asm/unistd_64.h
@@ -0,0 +1,379 @@
+#ifndef _SPARC64_UNISTD_H
+#define _SPARC64_UNISTD_H
+
+/*
+ * System calls under the Sparc.
+ *
+ * Don't be scared by the ugly clobbers, it is the only way I can
+ * think of right now to force the arguments into fixed registers
+ * before the trap into the system call with gcc 'asm' statements.
+ *
+ * Copyright (C) 1995, 2007 David S. Miller (davem@davemloft.net)
+ *
+ * SunOS compatibility based upon preliminary work which is:
+ *
+ * Copyright (C) 1995 Adrian M. Rodriguez (adrian@remus.rutgers.edu)
+ */
+
+#define __NR_restart_syscall      0 /* Linux Specific				   */
+#define __NR_exit                 1 /* Common                                      */
+#define __NR_fork                 2 /* Common                                      */
+#define __NR_read                 3 /* Common                                      */
+#define __NR_write                4 /* Common                                      */
+#define __NR_open                 5 /* Common                                      */
+#define __NR_close                6 /* Common                                      */
+#define __NR_wait4                7 /* Common                                      */
+#define __NR_creat                8 /* Common                                      */
+#define __NR_link                 9 /* Common                                      */
+#define __NR_unlink              10 /* Common                                      */
+#define __NR_execv               11 /* SunOS Specific                              */
+#define __NR_chdir               12 /* Common                                      */
+#define __NR_chown		 13 /* Common					   */
+#define __NR_mknod               14 /* Common                                      */
+#define __NR_chmod               15 /* Common                                      */
+#define __NR_lchown              16 /* Common                                      */
+#define __NR_brk                 17 /* Common                                      */
+#define __NR_perfctr             18 /* Performance counter operations              */
+#define __NR_lseek               19 /* Common                                      */
+#define __NR_getpid              20 /* Common                                      */
+#define __NR_capget		 21 /* Linux Specific				   */
+#define __NR_capset		 22 /* Linux Specific				   */
+#define __NR_setuid              23 /* Implemented via setreuid in SunOS           */
+#define __NR_getuid              24 /* Common                                      */
+#define __NR_vmsplice	         25 /* ENOSYS under SunOS			   */
+#define __NR_ptrace              26 /* Common                                      */
+#define __NR_alarm               27 /* Implemented via setitimer in SunOS          */
+#define __NR_sigaltstack	 28 /* Common					   */
+#define __NR_pause               29 /* Is sigblock(0)->sigpause() in SunOS         */
+#define __NR_utime               30 /* Implemented via utimes() under SunOS        */
+/* #define __NR_lchown32         31    Linux sparc32 specific                      */
+/* #define __NR_fchown32         32    Linux sparc32 specific                      */
+#define __NR_access              33 /* Common                                      */
+#define __NR_nice                34 /* Implemented via get/setpriority() in SunOS  */
+/* #define __NR_chown32          35    Linux sparc32 specific                      */
+#define __NR_sync                36 /* Common                                      */
+#define __NR_kill                37 /* Common                                      */
+#define __NR_stat                38 /* Common                                      */
+#define __NR_sendfile		 39 /* Linux Specific				   */
+#define __NR_lstat               40 /* Common                                      */
+#define __NR_dup                 41 /* Common                                      */
+#define __NR_pipe                42 /* Common                                      */
+#define __NR_times               43 /* Implemented via getrusage() in SunOS        */
+/* #define __NR_getuid32         44    Linux sparc32 specific                      */
+#define __NR_umount2             45 /* Linux Specific                              */
+#define __NR_setgid              46 /* Implemented via setregid() in SunOS         */
+#define __NR_getgid              47 /* Common                                      */
+#define __NR_signal              48 /* Implemented via sigvec() in SunOS           */
+#define __NR_geteuid             49 /* SunOS calls getuid()                        */
+#define __NR_getegid             50 /* SunOS calls getgid()                        */
+#define __NR_acct                51 /* Common                                      */
+#define __NR_memory_ordering	 52 /* Linux Specific				   */
+/* #define __NR_getgid32         53    Linux sparc32 specific                      */
+#define __NR_ioctl               54 /* Common                                      */
+#define __NR_reboot              55 /* Common                                      */
+/* #define __NR_mmap2		 56    Linux sparc32 Specific                      */
+#define __NR_symlink             57 /* Common                                      */
+#define __NR_readlink            58 /* Common                                      */
+#define __NR_execve              59 /* Common                                      */
+#define __NR_umask               60 /* Common                                      */
+#define __NR_chroot              61 /* Common                                      */
+#define __NR_fstat               62 /* Common                                      */
+#define __NR_fstat64             63 /* Linux Specific                              */
+#define __NR_getpagesize         64 /* Common                                      */
+#define __NR_msync               65 /* Common in newer 1.3.x revs...               */
+#define __NR_vfork               66 /* Common                                      */
+#define __NR_pread64             67 /* Linux Specific                              */
+#define __NR_pwrite64            68 /* Linux Specific                              */
+/* #define __NR_geteuid32        69    Linux sparc32, sbrk under SunOS             */
+/* #define __NR_getegid32        70    Linux sparc32, sstk under SunOS             */
+#define __NR_mmap                71 /* Common                                      */
+/* #define __NR_setreuid32       72    Linux sparc32, vadvise under SunOS          */
+#define __NR_munmap              73 /* Common                                      */
+#define __NR_mprotect            74 /* Common                                      */
+#define __NR_madvise             75 /* Common                                      */
+#define __NR_vhangup             76 /* Common                                      */
+/* #define __NR_truncate64       77    Linux sparc32 Specific			   */
+#define __NR_mincore             78 /* Common                                      */
+#define __NR_getgroups           79 /* Common                                      */
+#define __NR_setgroups           80 /* Common                                      */
+#define __NR_getpgrp             81 /* Common                                      */
+/* #define __NR_setgroups32      82    Linux sparc32, setpgrp under SunOS          */
+#define __NR_setitimer           83 /* Common                                      */
+/* #define __NR_ftruncate64      84    Linux sparc32 Specific			   */
+#define __NR_swapon              85 /* Common                                      */
+#define __NR_getitimer           86 /* Common                                      */
+/* #define __NR_setuid32         87    Linux sparc32, gethostname under SunOS      */
+#define __NR_sethostname         88 /* Common                                      */
+/* #define __NR_setgid32         89    Linux sparc32, getdtablesize under SunOS    */
+#define __NR_dup2                90 /* Common                                      */
+/* #define __NR_setfsuid32       91    Linux sparc32, getdopt under SunOS          */
+#define __NR_fcntl               92 /* Common                                      */
+#define __NR_select              93 /* Common                                      */
+/* #define __NR_setfsgid32       94    Linux sparc32, setdopt under SunOS          */
+#define __NR_fsync               95 /* Common                                      */
+#define __NR_setpriority         96 /* Common                                      */
+#define __NR_socket              97 /* Common                                      */
+#define __NR_connect             98 /* Common                                      */
+#define __NR_accept              99 /* Common                                      */
+#define __NR_getpriority        100 /* Common                                      */
+#define __NR_rt_sigreturn       101 /* Linux Specific                              */
+#define __NR_rt_sigaction       102 /* Linux Specific                              */
+#define __NR_rt_sigprocmask     103 /* Linux Specific                              */
+#define __NR_rt_sigpending      104 /* Linux Specific                              */
+#define __NR_rt_sigtimedwait    105 /* Linux Specific                              */
+#define __NR_rt_sigqueueinfo    106 /* Linux Specific                              */
+#define __NR_rt_sigsuspend      107 /* Linux Specific                              */
+#define __NR_setresuid          108 /* Linux Specific, sigvec under SunOS	   */
+#define __NR_getresuid          109 /* Linux Specific, sigblock under SunOS	   */
+#define __NR_setresgid          110 /* Linux Specific, sigsetmask under SunOS	   */
+#define __NR_getresgid          111 /* Linux Specific, sigpause under SunOS	   */
+/* #define __NR_setregid32       75    Linux sparc32, sigstack under SunOS         */
+#define __NR_recvmsg            113 /* Common                                      */
+#define __NR_sendmsg            114 /* Common                                      */
+/* #define __NR_getgroups32     115    Linux sparc32, vtrace under SunOS           */
+#define __NR_gettimeofday       116 /* Common                                      */
+#define __NR_getrusage          117 /* Common                                      */
+#define __NR_getsockopt         118 /* Common                                      */
+#define __NR_getcwd		119 /* Linux Specific				   */
+#define __NR_readv              120 /* Common                                      */
+#define __NR_writev             121 /* Common                                      */
+#define __NR_settimeofday       122 /* Common                                      */
+#define __NR_fchown             123 /* Common                                      */
+#define __NR_fchmod             124 /* Common                                      */
+#define __NR_recvfrom           125 /* Common                                      */
+#define __NR_setreuid           126 /* Common                                      */
+#define __NR_setregid           127 /* Common                                      */
+#define __NR_rename             128 /* Common                                      */
+#define __NR_truncate           129 /* Common                                      */
+#define __NR_ftruncate          130 /* Common                                      */
+#define __NR_flock              131 /* Common                                      */
+#define __NR_lstat64		132 /* Linux Specific                              */
+#define __NR_sendto             133 /* Common                                      */
+#define __NR_shutdown           134 /* Common                                      */
+#define __NR_socketpair         135 /* Common                                      */
+#define __NR_mkdir              136 /* Common                                      */
+#define __NR_rmdir              137 /* Common                                      */
+#define __NR_utimes             138 /* SunOS Specific                              */
+#define __NR_stat64		139 /* Linux Specific			           */
+#define __NR_sendfile64         140 /* adjtime under SunOS                         */
+#define __NR_getpeername        141 /* Common                                      */
+#define __NR_futex              142 /* gethostid under SunOS                       */
+#define __NR_gettid             143 /* ENOSYS under SunOS                          */
+#define __NR_getrlimit		144 /* Common                                      */
+#define __NR_setrlimit          145 /* Common                                      */
+#define __NR_pivot_root		146 /* Linux Specific, killpg under SunOS          */
+#define __NR_prctl		147 /* ENOSYS under SunOS                          */
+#define __NR_pciconfig_read	148 /* ENOSYS under SunOS                          */
+#define __NR_pciconfig_write	149 /* ENOSYS under SunOS                          */
+#define __NR_getsockname        150 /* Common                                      */
+#define __NR_inotify_init       151 /* Linux specific                              */
+#define __NR_inotify_add_watch  152 /* Linux specific                              */
+#define __NR_poll               153 /* Common                                      */
+#define __NR_getdents64		154 /* Linux specific				   */
+/* #define __NR_fcntl64         155    Linux sparc32 Specific                      */
+#define __NR_inotify_rm_watch   156 /* Linux specific				   */
+#define __NR_statfs             157 /* Common                                      */
+#define __NR_fstatfs            158 /* Common                                      */
+#define __NR_umount             159 /* Common                                      */
+#define __NR_sched_set_affinity 160 /* Linux specific, async_daemon under SunOS    */
+#define __NR_sched_get_affinity 161 /* Linux specific, getfh under SunOS           */
+#define __NR_getdomainname      162 /* SunOS Specific                              */
+#define __NR_setdomainname      163 /* Common                                      */
+#define __NR_utrap_install	164 /* SYSV ABI/v9 required			   */
+#define __NR_quotactl           165 /* Common                                      */
+#define __NR_set_tid_address    166 /* Linux specific, exportfs under SunOS        */
+#define __NR_mount              167 /* Common                                      */
+#define __NR_ustat              168 /* Common                                      */
+#define __NR_setxattr           169 /* SunOS: semsys                               */
+#define __NR_lsetxattr          170 /* SunOS: msgsys                               */
+#define __NR_fsetxattr          171 /* SunOS: shmsys                               */
+#define __NR_getxattr           172 /* SunOS: auditsys                             */
+#define __NR_lgetxattr          173 /* SunOS: rfssys                               */
+#define __NR_getdents           174 /* Common                                      */
+#define __NR_setsid             175 /* Common                                      */
+#define __NR_fchdir             176 /* Common                                      */
+#define __NR_fgetxattr          177 /* SunOS: fchroot                              */
+#define __NR_listxattr          178 /* SunOS: vpixsys                              */
+#define __NR_llistxattr         179 /* SunOS: aioread                              */
+#define __NR_flistxattr         180 /* SunOS: aiowrite                             */
+#define __NR_removexattr        181 /* SunOS: aiowait                              */
+#define __NR_lremovexattr       182 /* SunOS: aiocancel                            */
+#define __NR_sigpending         183 /* Common                                      */
+#define __NR_query_module	184 /* Linux Specific				   */
+#define __NR_setpgid            185 /* Common                                      */
+#define __NR_fremovexattr       186 /* SunOS: pathconf                             */
+#define __NR_tkill              187 /* SunOS: fpathconf                            */
+#define __NR_exit_group		188 /* Linux specific, sysconf undef SunOS         */
+#define __NR_uname              189 /* Linux Specific                              */
+#define __NR_init_module        190 /* Linux Specific                              */
+#define __NR_personality        191 /* Linux Specific                              */
+#define __NR_remap_file_pages   192 /* Linux Specific                              */
+#define __NR_epoll_create       193 /* Linux Specific                              */
+#define __NR_epoll_ctl          194 /* Linux Specific                              */
+#define __NR_epoll_wait         195 /* Linux Specific                              */
+#define __NR_ioprio_set         196 /* Linux Specific                              */
+#define __NR_getppid            197 /* Linux Specific                              */
+#define __NR_sigaction          198 /* Linux Specific                              */
+#define __NR_sgetmask           199 /* Linux Specific                              */
+#define __NR_ssetmask           200 /* Linux Specific                              */
+#define __NR_sigsuspend         201 /* Linux Specific                              */
+#define __NR_oldlstat           202 /* Linux Specific                              */
+#define __NR_uselib             203 /* Linux Specific                              */
+#define __NR_readdir            204 /* Linux Specific                              */
+#define __NR_readahead          205 /* Linux Specific                              */
+#define __NR_socketcall         206 /* Linux Specific                              */
+#define __NR_syslog             207 /* Linux Specific                              */
+#define __NR_lookup_dcookie     208 /* Linux Specific                              */
+#define __NR_fadvise64          209 /* Linux Specific                              */
+#define __NR_fadvise64_64       210 /* Linux Specific                              */
+#define __NR_tgkill             211 /* Linux Specific                              */
+#define __NR_waitpid            212 /* Linux Specific                              */
+#define __NR_swapoff            213 /* Linux Specific                              */
+#define __NR_sysinfo            214 /* Linux Specific                              */
+#define __NR_ipc                215 /* Linux Specific                              */
+#define __NR_sigreturn          216 /* Linux Specific                              */
+#define __NR_clone              217 /* Linux Specific                              */
+#define __NR_ioprio_get         218 /* Linux Specific                              */
+#define __NR_adjtimex           219 /* Linux Specific                              */
+#define __NR_sigprocmask        220 /* Linux Specific                              */
+#define __NR_create_module      221 /* Linux Specific                              */
+#define __NR_delete_module      222 /* Linux Specific                              */
+#define __NR_get_kernel_syms    223 /* Linux Specific                              */
+#define __NR_getpgid            224 /* Linux Specific                              */
+#define __NR_bdflush            225 /* Linux Specific                              */
+#define __NR_sysfs              226 /* Linux Specific                              */
+#define __NR_afs_syscall        227 /* Linux Specific                              */
+#define __NR_setfsuid           228 /* Linux Specific                              */
+#define __NR_setfsgid           229 /* Linux Specific                              */
+#define __NR__newselect         230 /* Linux Specific                              */
+#ifdef __KERNEL__
+#define __NR_time		231 /* Linux sparc32                               */
+#endif
+#define __NR_splice             232 /* Linux Specific                              */
+#define __NR_stime              233 /* Linux Specific                              */
+#define __NR_statfs64           234 /* Linux Specific                              */
+#define __NR_fstatfs64          235 /* Linux Specific                              */
+#define __NR__llseek            236 /* Linux Specific                              */
+#define __NR_mlock              237
+#define __NR_munlock            238
+#define __NR_mlockall           239
+#define __NR_munlockall         240
+#define __NR_sched_setparam     241
+#define __NR_sched_getparam     242
+#define __NR_sched_setscheduler 243
+#define __NR_sched_getscheduler 244
+#define __NR_sched_yield        245
+#define __NR_sched_get_priority_max 246
+#define __NR_sched_get_priority_min 247
+#define __NR_sched_rr_get_interval  248
+#define __NR_nanosleep          249
+#define __NR_mremap             250
+#define __NR__sysctl            251
+#define __NR_getsid             252
+#define __NR_fdatasync          253
+#define __NR_nfsservctl         254
+#define __NR_sync_file_range	255
+#define __NR_clock_settime	256
+#define __NR_clock_gettime	257
+#define __NR_clock_getres	258
+#define __NR_clock_nanosleep	259
+#define __NR_sched_getaffinity	260
+#define __NR_sched_setaffinity	261
+#define __NR_timer_settime	262
+#define __NR_timer_gettime	263
+#define __NR_timer_getoverrun	264
+#define __NR_timer_delete	265
+#define __NR_timer_create	266
+/* #define __NR_vserver		267 Reserved for VSERVER */
+#define __NR_io_setup		268
+#define __NR_io_destroy		269
+#define __NR_io_submit		270
+#define __NR_io_cancel		271
+#define __NR_io_getevents	272
+#define __NR_mq_open		273
+#define __NR_mq_unlink		274
+#define __NR_mq_timedsend	275
+#define __NR_mq_timedreceive	276
+#define __NR_mq_notify		277
+#define __NR_mq_getsetattr	278
+#define __NR_waitid		279
+#define __NR_tee		280
+#define __NR_add_key		281
+#define __NR_request_key	282
+#define __NR_keyctl		283
+#define __NR_openat		284
+#define __NR_mkdirat		285
+#define __NR_mknodat		286
+#define __NR_fchownat		287
+#define __NR_futimesat		288
+#define __NR_fstatat64		289
+#define __NR_unlinkat		290
+#define __NR_renameat		291
+#define __NR_linkat		292
+#define __NR_symlinkat		293
+#define __NR_readlinkat		294
+#define __NR_fchmodat		295
+#define __NR_faccessat		296
+#define __NR_pselect6		297
+#define __NR_ppoll		298
+#define __NR_unshare		299
+#define __NR_set_robust_list	300
+#define __NR_get_robust_list	301
+#define __NR_migrate_pages	302
+#define __NR_mbind		303
+#define __NR_get_mempolicy	304
+#define __NR_set_mempolicy	305
+#define __NR_kexec_load		306
+#define __NR_move_pages		307
+#define __NR_getcpu		308
+#define __NR_epoll_pwait	309
+#define __NR_utimensat		310
+#define __NR_signalfd		311
+#define __NR_timerfd_create	312
+#define __NR_eventfd		313
+#define __NR_fallocate		314
+#define __NR_timerfd_settime	315
+#define __NR_timerfd_gettime	316
+#define __NR_signalfd4		317
+#define __NR_eventfd2		318
+#define __NR_epoll_create1	319
+#define __NR_dup3		320
+#define __NR_pipe2		321
+#define __NR_inotify_init1	322
+
+#define NR_SYSCALLS		323
+
+#ifdef __KERNEL__
+#define __ARCH_WANT_IPC_PARSE_VERSION
+#define __ARCH_WANT_OLD_READDIR
+#define __ARCH_WANT_STAT64
+#define __ARCH_WANT_SYS_ALARM
+#define __ARCH_WANT_SYS_GETHOSTNAME
+#define __ARCH_WANT_SYS_PAUSE
+#define __ARCH_WANT_SYS_SGETMASK
+#define __ARCH_WANT_SYS_SIGNAL
+#define __ARCH_WANT_SYS_TIME
+#define __ARCH_WANT_COMPAT_SYS_TIME
+#define __ARCH_WANT_SYS_UTIME
+#define __ARCH_WANT_SYS_WAITPID
+#define __ARCH_WANT_SYS_SOCKETCALL
+#define __ARCH_WANT_SYS_FADVISE64
+#define __ARCH_WANT_SYS_GETPGRP
+#define __ARCH_WANT_SYS_LLSEEK
+#define __ARCH_WANT_SYS_NICE
+#define __ARCH_WANT_SYS_OLDUMOUNT
+#define __ARCH_WANT_SYS_SIGPENDING
+#define __ARCH_WANT_SYS_SIGPROCMASK
+#define __ARCH_WANT_SYS_RT_SIGSUSPEND
+#define __ARCH_WANT_COMPAT_SYS_RT_SIGSUSPEND
+
+/*
+ * "Conditional" syscalls
+ *
+ * What we want is __attribute__((weak,alias("sys_ni_syscall"))),
+ * but it doesn't work on all toolchains, so we just do it by hand
+ */
+#define cond_syscall(x) asm(".weak\t" #x "\n\t.set\t" #x ",sys_ni_syscall")
+
+#endif /* __KERNEL__ */
+#endif /* _SPARC64_UNISTD_H */
diff --git a/include/asm-sparc/upa.h b/arch/sparc/include/asm/upa.h
index 5b1633223f92..5b1633223f92 100644
--- a/include/asm-sparc/upa.h
+++ b/arch/sparc/include/asm/upa.h
diff --git a/include/asm-sparc/user.h b/arch/sparc/include/asm/user.h
index 3400ea87f148..3400ea87f148 100644
--- a/include/asm-sparc/user.h
+++ b/arch/sparc/include/asm/user.h
diff --git a/arch/sparc/include/asm/utrap.h b/arch/sparc/include/asm/utrap.h
new file mode 100644
index 000000000000..b10e527c22d9
--- /dev/null
+++ b/arch/sparc/include/asm/utrap.h
@@ -0,0 +1,51 @@
+/*
+ * include/asm/utrap.h
+ *
+ * Copyright (C) 1997 Jakub Jelinek (jj@sunsite.mff.cuni.cz)
+ */
+
+#ifndef __ASM_SPARC64_UTRAP_H
+#define __ASM_SPARC64_UTRAP_H
+
+#define UT_INSTRUCTION_EXCEPTION		1
+#define UT_INSTRUCTION_ERROR			2
+#define UT_INSTRUCTION_PROTECTION		3
+#define UT_ILLTRAP_INSTRUCTION			4
+#define UT_ILLEGAL_INSTRUCTION			5
+#define UT_PRIVILEGED_OPCODE			6
+#define UT_FP_DISABLED				7
+#define UT_FP_EXCEPTION_IEEE_754		8
+#define UT_FP_EXCEPTION_OTHER			9
+#define UT_TAG_OVERVIEW				10
+#define UT_DIVISION_BY_ZERO			11
+#define UT_DATA_EXCEPTION			12
+#define UT_DATA_ERROR				13
+#define UT_DATA_PROTECTION			14
+#define UT_MEM_ADDRESS_NOT_ALIGNED		15
+#define UT_PRIVILEGED_ACTION			16
+#define UT_ASYNC_DATA_ERROR			17
+#define UT_TRAP_INSTRUCTION_16			18
+#define UT_TRAP_INSTRUCTION_17			19
+#define UT_TRAP_INSTRUCTION_18			20
+#define UT_TRAP_INSTRUCTION_19			21
+#define UT_TRAP_INSTRUCTION_20			22
+#define UT_TRAP_INSTRUCTION_21			23
+#define UT_TRAP_INSTRUCTION_22			24
+#define UT_TRAP_INSTRUCTION_23			25
+#define UT_TRAP_INSTRUCTION_24			26
+#define UT_TRAP_INSTRUCTION_25			27
+#define UT_TRAP_INSTRUCTION_26			28
+#define UT_TRAP_INSTRUCTION_27			29
+#define UT_TRAP_INSTRUCTION_28			30
+#define UT_TRAP_INSTRUCTION_29			31
+#define UT_TRAP_INSTRUCTION_30			32
+#define UT_TRAP_INSTRUCTION_31			33
+
+#define	UTH_NOCHANGE				(-1)
+
+#ifndef __ASSEMBLY__
+typedef int utrap_entry_t;
+typedef void *utrap_handler_t;
+#endif /* __ASSEMBLY__ */
+
+#endif /* !(__ASM_SPARC64_PROCESSOR_H) */
diff --git a/include/asm-sparc/vac-ops.h b/arch/sparc/include/asm/vac-ops.h
index d10527611f11..d10527611f11 100644
--- a/include/asm-sparc/vac-ops.h
+++ b/arch/sparc/include/asm/vac-ops.h
diff --git a/include/asm-sparc/vaddrs.h b/arch/sparc/include/asm/vaddrs.h
index a22fed5a3c6b..541e13755cec 100644
--- a/include/asm-sparc/vaddrs.h
+++ b/arch/sparc/include/asm/vaddrs.h
@@ -4,7 +4,7 @@
 #include <asm/head.h>
 
 /*
- * asm-sparc/vaddrs.h:  Here we define the virtual addresses at
+ * asm/vaddrs.h:  Here we define the virtual addresses at
  *                      which important things will be mapped.
  *
  * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
diff --git a/include/asm-sparc/vfc_ioctls.h b/arch/sparc/include/asm/vfc_ioctls.h
index af8b69007b22..af8b69007b22 100644
--- a/include/asm-sparc/vfc_ioctls.h
+++ b/arch/sparc/include/asm/vfc_ioctls.h
diff --git a/include/asm-sparc/vga.h b/arch/sparc/include/asm/vga.h
index c69d5b2ba19a..c69d5b2ba19a 100644
--- a/include/asm-sparc/vga.h
+++ b/arch/sparc/include/asm/vga.h
diff --git a/include/asm-sparc/viking.h b/arch/sparc/include/asm/viking.h
index 989930aeb093..989930aeb093 100644
--- a/include/asm-sparc/viking.h
+++ b/arch/sparc/include/asm/viking.h
diff --git a/include/asm-sparc/vio.h b/arch/sparc/include/asm/vio.h
index d4de32f0f8af..d4de32f0f8af 100644
--- a/include/asm-sparc/vio.h
+++ b/arch/sparc/include/asm/vio.h
diff --git a/include/asm-sparc/visasm.h b/arch/sparc/include/asm/visasm.h
index de797b9bf552..de797b9bf552 100644
--- a/include/asm-sparc/visasm.h
+++ b/arch/sparc/include/asm/visasm.h
diff --git a/include/asm-sparc/watchdog.h b/arch/sparc/include/asm/watchdog.h
index 5baf2d3919cf..5baf2d3919cf 100644
--- a/include/asm-sparc/watchdog.h
+++ b/arch/sparc/include/asm/watchdog.h
diff --git a/include/asm-sparc/winmacro.h b/arch/sparc/include/asm/winmacro.h
index 5b0a06dc3bcb..5b0a06dc3bcb 100644
--- a/include/asm-sparc/winmacro.h
+++ b/arch/sparc/include/asm/winmacro.h
diff --git a/arch/sparc/include/asm/xor.h b/arch/sparc/include/asm/xor.h
new file mode 100644
index 000000000000..8ed591c7db2d
--- /dev/null
+++ b/arch/sparc/include/asm/xor.h
@@ -0,0 +1,8 @@
+#ifndef ___ASM_SPARC_XOR_H
+#define ___ASM_SPARC_XOR_H
+#if defined(__sparc__) && defined(__arch64__)
+#include <asm/xor_64.h>
+#else
+#include <asm/xor_32.h>
+#endif
+#endif
diff --git a/include/asm-sparc/xor_32.h b/arch/sparc/include/asm/xor_32.h
index f34b2cfa8206..44bfa0787f3f 100644
--- a/include/asm-sparc/xor_32.h
+++ b/arch/sparc/include/asm/xor_32.h
@@ -1,5 +1,5 @@
 /*
- * include/asm-sparc/xor.h
+ * include/asm/xor.h
  *
  * Optimized RAID-5 checksumming functions for 32-bit Sparc.
  *
diff --git a/include/asm-sparc/xor_64.h b/arch/sparc/include/asm/xor_64.h
index a0233884fc94..bee4bf4be3af 100644
--- a/include/asm-sparc/xor_64.h
+++ b/arch/sparc/include/asm/xor_64.h
@@ -1,5 +1,5 @@
 /*
- * include/asm-sparc64/xor.h
+ * include/asm/xor.h
  *
  * High speed xor_block operation for RAID4/5 utilizing the
  * UltraSparc Visual Instruction Set and Niagara block-init
diff --git a/arch/sparc/kernel/entry.S b/arch/sparc/kernel/entry.S
index 2f96256dc515..e8cdf715a546 100644
--- a/arch/sparc/kernel/entry.S
+++ b/arch/sparc/kernel/entry.S
@@ -1196,8 +1196,9 @@ sys_rt_sigreturn:
 	be	1f
 	 nop
 
+	add	%sp, STACKFRAME_SZ, %o0
 	call	syscall_trace
-	 nop
+	 mov	1, %o1
 
 1:
 	/* We are returning to a signal handler. */
@@ -1287,8 +1288,12 @@ linux_fast_syscall:
 	 mov	%i3, %o3
 
 linux_syscall_trace:
+	add	%sp, STACKFRAME_SZ, %o0
 	call	syscall_trace
-	 nop
+	 mov	0, %o1
+	cmp	%o0, 0
+	bne	3f
+	 mov	-ENOSYS, %o0
 	mov	%i0, %o0
 	mov	%i1, %o1
 	mov	%i2, %o2
@@ -1337,6 +1342,7 @@ syscall_is_too_hard:
 	call	%l7
 	 mov	%i5, %o5
 
+3:
 	st	%o0, [%sp + STACKFRAME_SZ + PT_I0]
 
 ret_sys_call:
@@ -1374,6 +1380,8 @@ ret_sys_call:
 	 st	%l2, [%sp + STACKFRAME_SZ + PT_NPC]
 
 linux_syscall_trace2:
+	add	%sp, STACKFRAME_SZ, %o0
+	mov	1, %o1
 	call	syscall_trace
 	 add	%l1, 0x4, %l2			/* npc = npc+4 */
 	st	%l1, [%sp + STACKFRAME_SZ + PT_PC]
diff --git a/arch/sparc/kernel/ioport.c b/arch/sparc/kernel/ioport.c
index 487960919f1f..2a8a847764d8 100644
--- a/arch/sparc/kernel/ioport.c
+++ b/arch/sparc/kernel/ioport.c
@@ -36,12 +36,12 @@
 #include <linux/pci.h>		/* struct pci_dev */
 #include <linux/proc_fs.h>
 #include <linux/scatterlist.h>
+#include <linux/of_device.h>
 
 #include <asm/io.h>
 #include <asm/vaddrs.h>
 #include <asm/oplib.h>
 #include <asm/prom.h>
-#include <asm/of_device.h>
 #include <asm/sbus.h>
 #include <asm/page.h>
 #include <asm/pgalloc.h>
diff --git a/arch/sparc/kernel/of_device.c b/arch/sparc/kernel/of_device.c
index cc4c235c4f59..c481d45f97b7 100644
--- a/arch/sparc/kernel/of_device.c
+++ b/arch/sparc/kernel/of_device.c
@@ -70,7 +70,7 @@ struct of_bus {
 				       int *addrc, int *sizec);
 	int		(*map)(u32 *addr, const u32 *range,
 			       int na, int ns, int pna);
-	unsigned int	(*get_flags)(const u32 *addr);
+	unsigned long	(*get_flags)(const u32 *addr, unsigned long);
 };
 
 /*
@@ -130,8 +130,10 @@ static int of_bus_default_map(u32 *addr, const u32 *range,
 	return 0;
 }
 
-static unsigned int of_bus_default_get_flags(const u32 *addr)
+static unsigned long of_bus_default_get_flags(const u32 *addr, unsigned long flags)
 {
+	if (flags)
+		return flags;
 	return IORESOURCE_MEM;
 }
 
@@ -194,17 +196,21 @@ static int of_bus_pci_map(u32 *addr, const u32 *range,
 	return 0;
 }
 
-static unsigned int of_bus_pci_get_flags(const u32 *addr)
+static unsigned long of_bus_pci_get_flags(const u32 *addr, unsigned long flags)
 {
-	unsigned int flags = 0;
 	u32 w = addr[0];
 
+	/* For PCI, we override whatever child busses may have used.  */
+	flags = 0;
 	switch((w >> 24) & 0x03) {
 	case 0x01:
 		flags |= IORESOURCE_IO;
+		break;
+
 	case 0x02: /* 32 bits */
 	case 0x03: /* 64 bits */
 		flags |= IORESOURCE_MEM;
+		break;
 	}
 	if (w & 0x40000000)
 		flags |= IORESOURCE_PREFETCH;
@@ -362,10 +368,11 @@ static void __init build_device_resources(struct of_device *op,
 		int pna, pns;
 
 		size = of_read_addr(reg + na, ns);
-		flags = bus->get_flags(reg);
 
 		memcpy(addr, reg, na * 4);
 
+		flags = bus->get_flags(reg, 0);
+
 		/* If the immediate parent has no ranges property to apply,
 		 * just use a 1<->1 mapping.
 		 */
@@ -393,6 +400,8 @@ static void __init build_device_resources(struct of_device *op,
 					       dna, dns, pna))
 				break;
 
+			flags = pbus->get_flags(addr, flags);
+
 			dna = pna;
 			dns = pns;
 			dbus = pbus;
diff --git a/arch/sparc/kernel/ptrace.c b/arch/sparc/kernel/ptrace.c
index 81f3b929743f..20699c701412 100644
--- a/arch/sparc/kernel/ptrace.c
+++ b/arch/sparc/kernel/ptrace.c
@@ -21,6 +21,7 @@
 #include <linux/signal.h>
 #include <linux/regset.h>
 #include <linux/elf.h>
+#include <linux/tracehook.h>
 
 #include <asm/pgtable.h>
 #include <asm/system.h>
@@ -450,21 +451,16 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data)
 	return ret;
 }
 
-asmlinkage void syscall_trace(void)
+asmlinkage int syscall_trace(struct pt_regs *regs, int syscall_exit_p)
 {
-	if (!test_thread_flag(TIF_SYSCALL_TRACE))
-		return;
-	if (!(current->ptrace & PT_PTRACED))
-		return;
-	ptrace_notify(SIGTRAP | ((current->ptrace & PT_TRACESYSGOOD)
-				 ? 0x80 : 0));
-	/*
-	 * this isn't the same as continuing with a signal, but it will do
-	 * for normal use.  strace only continues with a signal if the
-	 * stopping signal is not SIGTRAP.  -brl
-	 */
-	if (current->exit_code) {
-		send_sig (current->exit_code, current, 1);
-		current->exit_code = 0;
+	int ret = 0;
+
+	if (test_thread_flag(TIF_SYSCALL_TRACE)) {
+		if (syscall_exit_p)
+			tracehook_report_syscall_exit(regs, 0);
+		else
+			ret = tracehook_report_syscall_entry(regs);
 	}
+
+	return ret;
 }
diff --git a/arch/sparc/kernel/rtrap.S b/arch/sparc/kernel/rtrap.S
index 891f460b7b96..4da2e1f66290 100644
--- a/arch/sparc/kernel/rtrap.S
+++ b/arch/sparc/kernel/rtrap.S
@@ -69,12 +69,13 @@ ret_trap_lockless_ipi:
 
 	ld	[%curptr + TI_FLAGS], %g2
 signal_p:
-	andcc	%g2, (_TIF_SIGPENDING|_TIF_RESTORE_SIGMASK), %g0
+	andcc	%g2, _TIF_DO_NOTIFY_RESUME_MASK, %g0
 	bz,a	ret_trap_continue
 	 ld	[%sp + STACKFRAME_SZ + PT_PSR], %t_psr
 
+	mov	%g2, %o2
 	mov	%l5, %o1
-	call	do_signal
+	call	do_notify_resume
 	 add	%sp, STACKFRAME_SZ, %o0	! pt_regs ptr
 
 	/* Fall through. */
diff --git a/arch/sparc/kernel/signal.c b/arch/sparc/kernel/signal.c
index 3fd1df9f9ba7..c94f91c8b6e0 100644
--- a/arch/sparc/kernel/signal.c
+++ b/arch/sparc/kernel/signal.c
@@ -18,6 +18,7 @@
 #include <linux/smp.h>
 #include <linux/binfmts.h>	/* do_coredum */
 #include <linux/bitops.h>
+#include <linux/tracehook.h>
 
 #include <asm/uaccess.h>
 #include <asm/ptrace.h>
@@ -513,7 +514,7 @@ static inline void syscall_restart(unsigned long orig_i0, struct pt_regs *regs,
  * want to handle. Thus you cannot kill init even with a SIGKILL even by
  * mistake.
  */
-asmlinkage void do_signal(struct pt_regs * regs, unsigned long orig_i0)
+static void do_signal(struct pt_regs *regs, unsigned long orig_i0)
 {
 	struct k_sigaction ka;
 	int restart_syscall;
@@ -552,6 +553,8 @@ asmlinkage void do_signal(struct pt_regs * regs, unsigned long orig_i0)
 		 */
 		if (test_thread_flag(TIF_RESTORE_SIGMASK))
 			clear_thread_flag(TIF_RESTORE_SIGMASK);
+
+		tracehook_signal_handler(signr, &info, &ka, regs, 0);
 		return;
 	}
 	if (restart_syscall &&
@@ -579,6 +582,17 @@ asmlinkage void do_signal(struct pt_regs * regs, unsigned long orig_i0)
 	}
 }
 
+void do_notify_resume(struct pt_regs *regs, unsigned long orig_i0,
+		      unsigned long thread_info_flags)
+{
+	if (thread_info_flags & (_TIF_SIGPENDING | _TIF_RESTORE_SIGMASK))
+		do_signal(regs, orig_i0);
+	if (thread_info_flags & _TIF_NOTIFY_RESUME) {
+		clear_thread_flag(TIF_NOTIFY_RESUME);
+		tracehook_notify_resume(regs);
+	}
+}
+
 asmlinkage int
 do_sys_sigstack(struct sigstack __user *ssptr, struct sigstack __user *ossptr,
 		unsigned long sp)
diff --git a/arch/sparc/kernel/sun4d_smp.c b/arch/sparc/kernel/sun4d_smp.c
index dfde77ff0848..69596402a500 100644
--- a/arch/sparc/kernel/sun4d_smp.c
+++ b/arch/sparc/kernel/sun4d_smp.c
@@ -262,8 +262,9 @@ static struct smp_funcall {
 static DEFINE_SPINLOCK(cross_call_lock);
 
 /* Cross calls must be serialized, at least currently. */
-void smp4d_cross_call(smpfunc_t func, unsigned long arg1, unsigned long arg2,
-		    unsigned long arg3, unsigned long arg4, unsigned long arg5)
+static void smp4d_cross_call(smpfunc_t func, cpumask_t mask, unsigned long arg1,
+			     unsigned long arg2, unsigned long arg3,
+			     unsigned long arg4)
 {
 	if(smp_processors_ready) {
 		register int high = smp_highest_cpu;
@@ -278,7 +279,7 @@ void smp4d_cross_call(smpfunc_t func, unsigned long arg1, unsigned long arg2,
 			register unsigned long a2 asm("i2") = arg2;
 			register unsigned long a3 asm("i3") = arg3;
 			register unsigned long a4 asm("i4") = arg4;
-			register unsigned long a5 asm("i5") = arg5;
+			register unsigned long a5 asm("i5") = 0;
 
 			__asm__ __volatile__(
 				"std %0, [%6]\n\t"
@@ -290,11 +291,10 @@ void smp4d_cross_call(smpfunc_t func, unsigned long arg1, unsigned long arg2,
 
 		/* Init receive/complete mapping, plus fire the IPI's off. */
 		{
-			cpumask_t mask;
 			register int i;
 
-			mask = cpumask_of_cpu(hard_smp4d_processor_id());
-			cpus_andnot(mask, cpu_online_map, mask);
+			cpu_clear(smp_processor_id(), mask);
+			cpus_and(mask, cpu_online_map, mask);
 			for(i = 0; i <= high; i++) {
 				if (cpu_isset(i, mask)) {
 					ccall_info.processors_in[i] = 0;
@@ -309,12 +309,16 @@ void smp4d_cross_call(smpfunc_t func, unsigned long arg1, unsigned long arg2,
 
 			i = 0;
 			do {
+				if (!cpu_isset(i, mask))
+					continue;
 				while(!ccall_info.processors_in[i])
 					barrier();
 			} while(++i <= high);
 
 			i = 0;
 			do {
+				if (!cpu_isset(i, mask))
+					continue;
 				while(!ccall_info.processors_out[i])
 					barrier();
 			} while(++i <= high);
diff --git a/arch/sparc/kernel/sun4m_smp.c b/arch/sparc/kernel/sun4m_smp.c
index 406ac1abc83a..a14a76ac7f36 100644
--- a/arch/sparc/kernel/sun4m_smp.c
+++ b/arch/sparc/kernel/sun4m_smp.c
@@ -244,9 +244,9 @@ static struct smp_funcall {
 static DEFINE_SPINLOCK(cross_call_lock);
 
 /* Cross calls must be serialized, at least currently. */
-static void smp4m_cross_call(smpfunc_t func, unsigned long arg1,
+static void smp4m_cross_call(smpfunc_t func, cpumask_t mask, unsigned long arg1,
 			     unsigned long arg2, unsigned long arg3,
-			     unsigned long arg4, unsigned long arg5)
+			     unsigned long arg4)
 {
 		register int ncpus = SUN4M_NCPUS;
 		unsigned long flags;
@@ -259,14 +259,14 @@ static void smp4m_cross_call(smpfunc_t func, unsigned long arg1,
 		ccall_info.arg2 = arg2;
 		ccall_info.arg3 = arg3;
 		ccall_info.arg4 = arg4;
-		ccall_info.arg5 = arg5;
+		ccall_info.arg5 = 0;
 
 		/* Init receive/complete mapping, plus fire the IPI's off. */
 		{
-			cpumask_t mask = cpu_online_map;
 			register int i;
 
 			cpu_clear(smp_processor_id(), mask);
+			cpus_and(mask, cpu_online_map, mask);
 			for(i = 0; i < ncpus; i++) {
 				if (cpu_isset(i, mask)) {
 					ccall_info.processors_in[i] = 0;
@@ -284,12 +284,16 @@ static void smp4m_cross_call(smpfunc_t func, unsigned long arg1,
 
 			i = 0;
 			do {
+				if (!cpu_isset(i, mask))
+					continue;
 				while(!ccall_info.processors_in[i])
 					barrier();
 			} while(++i < ncpus);
 
 			i = 0;
 			do {
+				if (!cpu_isset(i, mask))
+					continue;
 				while(!ccall_info.processors_out[i])
 					barrier();
 			} while(++i < ncpus);
diff --git a/arch/sparc/kernel/systbls.S b/arch/sparc/kernel/systbls.S
index 5a7c4c8345c3..e1b9233b90ab 100644
--- a/arch/sparc/kernel/systbls.S
+++ b/arch/sparc/kernel/systbls.S
@@ -80,4 +80,5 @@ sys_call_table:
 /*300*/	.long sys_set_robust_list, sys_get_robust_list, sys_migrate_pages, sys_mbind, sys_get_mempolicy
 /*305*/	.long sys_set_mempolicy, sys_kexec_load, sys_move_pages, sys_getcpu, sys_epoll_pwait
 /*310*/	.long sys_utimensat, sys_signalfd, sys_timerfd_create, sys_eventfd, sys_fallocate
-/*315*/	.long sys_timerfd_settime, sys_timerfd_gettime
+/*315*/	.long sys_timerfd_settime, sys_timerfd_gettime, sys_signalfd4, sys_eventfd2, sys_epoll_create1
+/*320*/	.long sys_dup3, sys_pipe2, sys_inotify_init1
diff --git a/arch/sparc/kernel/time.c b/arch/sparc/kernel/time.c
index ab3dd0b257d3..0762f5db1924 100644
--- a/arch/sparc/kernel/time.c
+++ b/arch/sparc/kernel/time.c
@@ -28,6 +28,7 @@
 #include <linux/pci.h>
 #include <linux/ioport.h>
 #include <linux/profile.h>
+#include <linux/of_device.h>
 
 #include <asm/oplib.h>
 #include <asm/timer.h>
@@ -40,7 +41,6 @@
 #include <asm/sun4paddr.h>
 #include <asm/page.h>
 #include <asm/pcic.h>
-#include <asm/of_device.h>
 #include <asm/irq_regs.h>
 
 #include "irq.h"
diff --git a/arch/sparc64/Kconfig b/arch/sparc64/Kconfig
index 7c88263256af..36b4b7ab9cfb 100644
--- a/arch/sparc64/Kconfig
+++ b/arch/sparc64/Kconfig
@@ -17,6 +17,7 @@ config SPARC64
 	select HAVE_LMB
 	select HAVE_ARCH_KGDB
 	select USE_GENERIC_SMP_HELPERS if SMP
+	select HAVE_ARCH_TRACEHOOK
 
 config GENERIC_TIME
 	bool
@@ -230,6 +231,7 @@ endmenu
 
 config NUMA
 	bool "NUMA support"
+	depends on SMP
 
 config NODES_SHIFT
 	int
diff --git a/arch/sparc64/kernel/auxio.c b/arch/sparc64/kernel/auxio.c
index c55f0293eacd..dd5c7bf87619 100644
--- a/arch/sparc64/kernel/auxio.c
+++ b/arch/sparc64/kernel/auxio.c
@@ -9,9 +9,9 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/ioport.h>
+#include <linux/of_device.h>
 
 #include <asm/prom.h>
-#include <asm/of_device.h>
 #include <asm/io.h>
 #include <asm/auxio.h>
 
diff --git a/arch/sparc64/kernel/compat_audit.c b/arch/sparc64/kernel/compat_audit.c
index c1979482aa92..c831b0a4e660 100644
--- a/arch/sparc64/kernel/compat_audit.c
+++ b/arch/sparc64/kernel/compat_audit.c
@@ -1,4 +1,4 @@
-#include <asm-sparc/unistd.h>
+#include <asm/unistd_32.h>
 
 unsigned sparc32_dir_class[] = {
 #include <asm-generic/audit_dir_write.h>
diff --git a/arch/sparc64/kernel/ebus.c b/arch/sparc64/kernel/ebus.c
index 4d58d7ce708d..60d36d142559 100644
--- a/arch/sparc64/kernel/ebus.c
+++ b/arch/sparc64/kernel/ebus.c
@@ -14,13 +14,13 @@
 #include <linux/interrupt.h>
 #include <linux/delay.h>
 #include <linux/pci.h>
+#include <linux/of_device.h>
 
 #include <asm/system.h>
 #include <asm/page.h>
 #include <asm/ebus.h>
 #include <asm/oplib.h>
 #include <asm/prom.h>
-#include <asm/of_device.h>
 #include <asm/bpp.h>
 #include <asm/irq.h>
 #include <asm/io.h>
diff --git a/arch/sparc64/kernel/entry.h b/arch/sparc64/kernel/entry.h
index 32fbab620852..fc294a292899 100644
--- a/arch/sparc64/kernel/entry.h
+++ b/arch/sparc64/kernel/entry.h
@@ -22,8 +22,7 @@ extern void do_notify_resume(struct pt_regs *regs,
 			     unsigned long orig_i0,
 			     unsigned long thread_info_flags);
 
-extern asmlinkage void syscall_trace(struct pt_regs *regs,
-				     int syscall_exit_p);
+extern asmlinkage int syscall_trace(struct pt_regs *regs, int syscall_exit_p);
 
 extern void bad_trap_tl1(struct pt_regs *regs, long lvl);
 
diff --git a/arch/sparc64/kernel/irq.c b/arch/sparc64/kernel/irq.c
index c481673d249c..9b6689d9d570 100644
--- a/arch/sparc64/kernel/irq.c
+++ b/arch/sparc64/kernel/irq.c
@@ -682,10 +682,32 @@ void ack_bad_irq(unsigned int virt_irq)
 	       ino, virt_irq);
 }
 
+void *hardirq_stack[NR_CPUS];
+void *softirq_stack[NR_CPUS];
+
+static __attribute__((always_inline)) void *set_hardirq_stack(void)
+{
+	void *orig_sp, *sp = hardirq_stack[smp_processor_id()];
+
+	__asm__ __volatile__("mov %%sp, %0" : "=r" (orig_sp));
+	if (orig_sp < sp ||
+	    orig_sp > (sp + THREAD_SIZE)) {
+		sp += THREAD_SIZE - 192 - STACK_BIAS;
+		__asm__ __volatile__("mov %0, %%sp" : : "r" (sp));
+	}
+
+	return orig_sp;
+}
+static __attribute__((always_inline)) void restore_hardirq_stack(void *orig_sp)
+{
+	__asm__ __volatile__("mov %0, %%sp" : : "r" (orig_sp));
+}
+
 void handler_irq(int irq, struct pt_regs *regs)
 {
 	unsigned long pstate, bucket_pa;
 	struct pt_regs *old_regs;
+	void *orig_sp;
 
 	clear_softint(1 << irq);
 
@@ -703,6 +725,8 @@ void handler_irq(int irq, struct pt_regs *regs)
 			       "i" (PSTATE_IE)
 			     : "memory");
 
+	orig_sp = set_hardirq_stack();
+
 	while (bucket_pa) {
 		struct irq_desc *desc;
 		unsigned long next_pa;
@@ -719,10 +743,38 @@ void handler_irq(int irq, struct pt_regs *regs)
 		bucket_pa = next_pa;
 	}
 
+	restore_hardirq_stack(orig_sp);
+
 	irq_exit();
 	set_irq_regs(old_regs);
 }
 
+void do_softirq(void)
+{
+	unsigned long flags;
+
+	if (in_interrupt())
+		return;
+
+	local_irq_save(flags);
+
+	if (local_softirq_pending()) {
+		void *orig_sp, *sp = softirq_stack[smp_processor_id()];
+
+		sp += THREAD_SIZE - 192 - STACK_BIAS;
+
+		__asm__ __volatile__("mov %%sp, %0\n\t"
+				     "mov %1, %%sp"
+				     : "=&r" (orig_sp)
+				     : "r" (sp));
+		__do_softirq();
+		__asm__ __volatile__("mov %0, %%sp"
+				     : : "r" (orig_sp));
+	}
+
+	local_irq_restore(flags);
+}
+
 #ifdef CONFIG_HOTPLUG_CPU
 void fixup_irqs(void)
 {
@@ -915,12 +967,18 @@ static void __init sun4v_init_mondo_queues(void)
 		alloc_one_mondo(&tb->nonresum_mondo_pa, tb->nonresum_qmask);
 		alloc_one_kbuf(&tb->nonresum_kernel_buf_pa,
 			       tb->nonresum_qmask);
+	}
+}
+
+static void __init init_send_mondo_info(void)
+{
+	int cpu;
+
+	for_each_possible_cpu(cpu) {
+		struct trap_per_cpu *tb = &trap_block[cpu];
 
 		init_cpu_send_mondo_info(tb);
 	}
-
-	/* Load up the boot cpu's entries.  */
-	sun4v_register_mondo_queues(hard_smp_processor_id());
 }
 
 static struct irqaction timer_irq_action = {
@@ -949,6 +1007,13 @@ void __init init_IRQ(void)
 	if (tlb_type == hypervisor)
 		sun4v_init_mondo_queues();
 
+	init_send_mondo_info();
+
+	if (tlb_type == hypervisor) {
+		/* Load up the boot cpu's entries.  */
+		sun4v_register_mondo_queues(hard_smp_processor_id());
+	}
+
 	/* We need to clear any IRQ's pending in the soft interrupt
 	 * registers, a spurious one could be left around from the
 	 * PROM timer which we just disabled.
diff --git a/arch/sparc64/kernel/kprobes.c b/arch/sparc64/kernel/kprobes.c
index f43b5d755354..201a6e547e4a 100644
--- a/arch/sparc64/kernel/kprobes.c
+++ b/arch/sparc64/kernel/kprobes.c
@@ -478,9 +478,9 @@ int __kprobes longjmp_break_handler(struct kprobe *p, struct pt_regs *regs)
 	return 0;
 }
 
-/* Called with kretprobe_lock held.  The value stored in the return
- * address register is actually 2 instructions before where the
- * callee will return to.  Sequences usually look something like this
+/* The value stored in the return address register is actually 2
+ * instructions before where the callee will return to.
+ * Sequences usually look something like this
  *
  *		call	some_function	<--- return register points here
  *		 nop			<--- call delay slot
@@ -512,8 +512,7 @@ int __kprobes trampoline_probe_handler(struct kprobe *p, struct pt_regs *regs)
 	unsigned long trampoline_address =(unsigned long)&kretprobe_trampoline;
 
 	INIT_HLIST_HEAD(&empty_rp);
-	spin_lock_irqsave(&kretprobe_lock, flags);
-	head = kretprobe_inst_table_head(current);
+	kretprobe_hash_lock(current, &head, &flags);
 
 	/*
 	 * It is possible to have multiple instances associated with a given
@@ -553,7 +552,7 @@ int __kprobes trampoline_probe_handler(struct kprobe *p, struct pt_regs *regs)
 	regs->tnpc = orig_ret_address + 4;
 
 	reset_current_kprobe();
-	spin_unlock_irqrestore(&kretprobe_lock, flags);
+	kretprobe_hash_unlock(current, &flags);
 	preempt_enable_no_resched();
 
 	hlist_for_each_entry_safe(ri, node, tmp, &empty_rp, hlist) {
diff --git a/arch/sparc64/kernel/kstack.h b/arch/sparc64/kernel/kstack.h
new file mode 100644
index 000000000000..4248d969272f
--- /dev/null
+++ b/arch/sparc64/kernel/kstack.h
@@ -0,0 +1,60 @@
+#ifndef _KSTACK_H
+#define _KSTACK_H
+
+#include <linux/thread_info.h>
+#include <linux/sched.h>
+#include <asm/ptrace.h>
+#include <asm/irq.h>
+
+/* SP must be STACK_BIAS adjusted already.  */
+static inline bool kstack_valid(struct thread_info *tp, unsigned long sp)
+{
+	unsigned long base = (unsigned long) tp;
+
+	if (sp >= (base + sizeof(struct thread_info)) &&
+	    sp <= (base + THREAD_SIZE - sizeof(struct sparc_stackf)))
+		return true;
+
+	if (hardirq_stack[tp->cpu]) {
+		base = (unsigned long) hardirq_stack[tp->cpu];
+		if (sp >= base &&
+		    sp <= (base + THREAD_SIZE - sizeof(struct sparc_stackf)))
+			return true;
+		base = (unsigned long) softirq_stack[tp->cpu];
+		if (sp >= base &&
+		    sp <= (base + THREAD_SIZE - sizeof(struct sparc_stackf)))
+			return true;
+	}
+	return false;
+}
+
+/* Does "regs" point to a valid pt_regs trap frame?  */
+static inline bool kstack_is_trap_frame(struct thread_info *tp, struct pt_regs *regs)
+{
+	unsigned long base = (unsigned long) tp;
+	unsigned long addr = (unsigned long) regs;
+
+	if (addr >= base &&
+	    addr <= (base + THREAD_SIZE - sizeof(*regs)))
+		goto check_magic;
+
+	if (hardirq_stack[tp->cpu]) {
+		base = (unsigned long) hardirq_stack[tp->cpu];
+		if (addr >= base &&
+		    addr <= (base + THREAD_SIZE - sizeof(*regs)))
+			goto check_magic;
+		base = (unsigned long) softirq_stack[tp->cpu];
+		if (addr >= base &&
+		    addr <= (base + THREAD_SIZE - sizeof(*regs)))
+			goto check_magic;
+	}
+	return false;
+
+check_magic:
+	if ((regs->magic & ~0x1ff) == PT_REGS_MAGIC)
+		return true;
+	return false;
+
+}
+
+#endif /* _KSTACK_H */
diff --git a/arch/sparc64/kernel/of_device.c b/arch/sparc64/kernel/of_device.c
index 4fd48ab7dda4..f845f150f565 100644
--- a/arch/sparc64/kernel/of_device.c
+++ b/arch/sparc64/kernel/of_device.c
@@ -56,9 +56,6 @@ struct of_device *of_find_device_by_node(struct device_node *dp)
 EXPORT_SYMBOL(of_find_device_by_node);
 
 #ifdef CONFIG_PCI
-struct bus_type isa_bus_type;
-EXPORT_SYMBOL(isa_bus_type);
-
 struct bus_type ebus_bus_type;
 EXPORT_SYMBOL(ebus_bus_type);
 #endif
@@ -99,7 +96,7 @@ struct of_bus {
 				       int *addrc, int *sizec);
 	int		(*map)(u32 *addr, const u32 *range,
 			       int na, int ns, int pna);
-	unsigned int	(*get_flags)(const u32 *addr);
+	unsigned long	(*get_flags)(const u32 *addr, unsigned long);
 };
 
 /*
@@ -159,8 +156,10 @@ static int of_bus_default_map(u32 *addr, const u32 *range,
 	return 0;
 }
 
-static unsigned int of_bus_default_get_flags(const u32 *addr)
+static unsigned long of_bus_default_get_flags(const u32 *addr, unsigned long flags)
 {
+	if (flags)
+		return flags;
 	return IORESOURCE_MEM;
 }
 
@@ -252,17 +251,21 @@ static int of_bus_pci_map(u32 *addr, const u32 *range,
 	return 0;
 }
 
-static unsigned int of_bus_pci_get_flags(const u32 *addr)
+static unsigned long of_bus_pci_get_flags(const u32 *addr, unsigned long flags)
 {
-	unsigned int flags = 0;
 	u32 w = addr[0];
 
+	/* For PCI, we override whatever child busses may have used.  */
+	flags = 0;
 	switch((w >> 24) & 0x03) {
 	case 0x01:
 		flags |= IORESOURCE_IO;
+		break;
+
 	case 0x02: /* 32 bits */
 	case 0x03: /* 64 bits */
 		flags |= IORESOURCE_MEM;
+		break;
 	}
 	if (w & 0x40000000)
 		flags |= IORESOURCE_PREFETCH;
@@ -481,10 +484,10 @@ static void __init build_device_resources(struct of_device *op,
 		int pna, pns;
 
 		size = of_read_addr(reg + na, ns);
-		flags = bus->get_flags(reg);
-
 		memcpy(addr, reg, na * 4);
 
+		flags = bus->get_flags(addr, 0);
+
 		if (use_1to1_mapping(pp)) {
 			result = of_read_addr(addr, na);
 			goto build_res;
@@ -509,6 +512,8 @@ static void __init build_device_resources(struct of_device *op,
 					       dna, dns, pna))
 				break;
 
+			flags = pbus->get_flags(addr, flags);
+
 			dna = pna;
 			dns = pns;
 			dbus = pbus;
@@ -842,8 +847,6 @@ static int __init of_bus_driver_init(void)
 	err = of_bus_type_init(&of_platform_bus_type, "of");
 #ifdef CONFIG_PCI
 	if (!err)
-		err = of_bus_type_init(&isa_bus_type, "isa");
-	if (!err)
 		err = of_bus_type_init(&ebus_bus_type, "ebus");
 #endif
 #ifdef CONFIG_SBUS
diff --git a/arch/sparc64/kernel/pci_common.c b/arch/sparc64/kernel/pci_common.c
index 19fa621d6a60..09a5ec200c61 100644
--- a/arch/sparc64/kernel/pci_common.c
+++ b/arch/sparc64/kernel/pci_common.c
@@ -8,9 +8,9 @@
 #include <linux/init.h>
 #include <linux/pci.h>
 #include <linux/device.h>
+#include <linux/of_device.h>
 
 #include <asm/prom.h>
-#include <asm/of_device.h>
 #include <asm/oplib.h>
 
 #include "pci_impl.h"
diff --git a/arch/sparc64/kernel/pci_psycho.c b/arch/sparc64/kernel/pci_psycho.c
index 994dbe0603da..ef5fe29202c2 100644
--- a/arch/sparc64/kernel/pci_psycho.c
+++ b/arch/sparc64/kernel/pci_psycho.c
@@ -11,12 +11,12 @@
 #include <linux/init.h>
 #include <linux/slab.h>
 #include <linux/interrupt.h>
+#include <linux/of_device.h>
 
 #include <asm/iommu.h>
 #include <asm/irq.h>
 #include <asm/starfire.h>
 #include <asm/prom.h>
-#include <asm/of_device.h>
 #include <asm/oplib.h>
 
 #include "pci_impl.h"
diff --git a/arch/sparc64/kernel/pci_sabre.c b/arch/sparc64/kernel/pci_sabre.c
index 4c34195baf37..ade5184e75d1 100644
--- a/arch/sparc64/kernel/pci_sabre.c
+++ b/arch/sparc64/kernel/pci_sabre.c
@@ -11,6 +11,7 @@
 #include <linux/init.h>
 #include <linux/slab.h>
 #include <linux/interrupt.h>
+#include <linux/of_device.h>
 
 #include <asm/apb.h>
 #include <asm/iommu.h>
@@ -18,7 +19,6 @@
 #include <asm/smp.h>
 #include <asm/oplib.h>
 #include <asm/prom.h>
-#include <asm/of_device.h>
 
 #include "pci_impl.h"
 #include "iommu_common.h"
diff --git a/arch/sparc64/kernel/pci_schizo.c b/arch/sparc64/kernel/pci_schizo.c
index 615edd9c8e2a..9248c6737f0e 100644
--- a/arch/sparc64/kernel/pci_schizo.c
+++ b/arch/sparc64/kernel/pci_schizo.c
@@ -9,13 +9,13 @@
 #include <linux/init.h>
 #include <linux/slab.h>
 #include <linux/interrupt.h>
+#include <linux/of_device.h>
 
 #include <asm/iommu.h>
 #include <asm/irq.h>
 #include <asm/upa.h>
 #include <asm/pstate.h>
 #include <asm/prom.h>
-#include <asm/of_device.h>
 #include <asm/oplib.h>
 
 #include "pci_impl.h"
diff --git a/arch/sparc64/kernel/power.c b/arch/sparc64/kernel/power.c
index eae8ca2a6ba5..3bb987a6d03c 100644
--- a/arch/sparc64/kernel/power.c
+++ b/arch/sparc64/kernel/power.c
@@ -13,11 +13,11 @@
 #include <linux/pm.h>
 #include <linux/syscalls.h>
 #include <linux/reboot.h>
+#include <linux/of_device.h>
 
 #include <asm/system.h>
 #include <asm/auxio.h>
 #include <asm/prom.h>
-#include <asm/of_device.h>
 #include <asm/io.h>
 #include <asm/sstate.h>
 #include <asm/reboot.h>
diff --git a/arch/sparc64/kernel/process.c b/arch/sparc64/kernel/process.c
index 8a9cd3e165b9..15f4178592e7 100644
--- a/arch/sparc64/kernel/process.c
+++ b/arch/sparc64/kernel/process.c
@@ -52,7 +52,7 @@
 #include <asm/irq_regs.h>
 #include <asm/smp.h>
 
-/* #define VERBOSE_SHOWREGS */
+#include "kstack.h"
 
 static void sparc64_yield(int cpu)
 {
@@ -213,22 +213,8 @@ static void show_regwindow(struct pt_regs *regs)
 		printk("I7: <%pS>\n", (void *) rwk->ins[7]);
 }
 
-#ifdef CONFIG_SMP
-static DEFINE_SPINLOCK(regdump_lock);
-#endif
-
-void __show_regs(struct pt_regs * regs)
+void show_regs(struct pt_regs *regs)
 {
-#ifdef CONFIG_SMP
-	unsigned long flags;
-
-	/* Protect against xcall ipis which might lead to livelock on the lock */
-	__asm__ __volatile__("rdpr      %%pstate, %0\n\t"
-			     "wrpr      %0, %1, %%pstate"
-			     : "=r" (flags)
-			     : "i" (PSTATE_IE));
-	spin_lock(&regdump_lock);
-#endif
 	printk("TSTATE: %016lx TPC: %016lx TNPC: %016lx Y: %08x    %s\n", regs->tstate,
 	       regs->tpc, regs->tnpc, regs->y, print_tainted());
 	printk("TPC: <%pS>\n", (void *) regs->tpc);
@@ -246,61 +232,8 @@ void __show_regs(struct pt_regs * regs)
 	       regs->u_regs[15]);
 	printk("RPC: <%pS>\n", (void *) regs->u_regs[15]);
 	show_regwindow(regs);
-#ifdef CONFIG_SMP
-	spin_unlock(&regdump_lock);
-	__asm__ __volatile__("wrpr	%0, 0, %%pstate"
-			     : : "r" (flags));
-#endif
-}
-
-#ifdef VERBOSE_SHOWREGS
-static void idump_from_user (unsigned int *pc)
-{
-	int i;
-	int code;
-	
-	if((((unsigned long) pc) & 3))
-		return;
-	
-	pc -= 3;
-	for(i = -3; i < 6; i++) {
-		get_user(code, pc);
-		printk("%c%08x%c",i?' ':'<',code,i?' ':'>');
-		pc++;
-	}
-	printk("\n");
-}
-#endif
-
-void show_regs(struct pt_regs *regs)
-{
-#ifdef VERBOSE_SHOWREGS
-	extern long etrap, etraptl1;
-#endif
-	__show_regs(regs);
-#if 0
-#ifdef CONFIG_SMP
-	{
-		extern void smp_report_regs(void);
-
-		smp_report_regs();
-	}
-#endif
-#endif
-
-#ifdef VERBOSE_SHOWREGS	
-	if (regs->tpc >= &etrap && regs->tpc < &etraptl1 &&
-	    regs->u_regs[14] >= (long)current - PAGE_SIZE &&
-	    regs->u_regs[14] < (long)current + 6 * PAGE_SIZE) {
-		printk ("*********parent**********\n");
-		__show_regs((struct pt_regs *)(regs->u_regs[14] + PTREGS_OFF));
-		idump_from_user(((struct pt_regs *)(regs->u_regs[14] + PTREGS_OFF))->tpc);
-		printk ("*********endpar**********\n");
-	}
-#endif
 }
 
-#ifdef CONFIG_MAGIC_SYSRQ
 struct global_reg_snapshot global_reg_snapshot[NR_CPUS];
 static DEFINE_SPINLOCK(global_reg_snapshot_lock);
 
@@ -315,14 +248,22 @@ static void __global_reg_self(struct thread_info *tp, struct pt_regs *regs,
 	global_reg_snapshot[this_cpu].o7 = regs->u_regs[UREG_I7];
 
 	if (regs->tstate & TSTATE_PRIV) {
+		struct thread_info *tp = current_thread_info();
 		struct reg_window *rw;
 
 		rw = (struct reg_window *)
 			(regs->u_regs[UREG_FP] + STACK_BIAS);
-		global_reg_snapshot[this_cpu].i7 = rw->ins[6];
-	} else
+		if (kstack_valid(tp, (unsigned long) rw)) {
+			global_reg_snapshot[this_cpu].i7 = rw->ins[7];
+			rw = (struct reg_window *)
+				(rw->ins[6] + STACK_BIAS);
+			if (kstack_valid(tp, (unsigned long) rw))
+				global_reg_snapshot[this_cpu].rpc = rw->ins[7];
+		}
+	} else {
 		global_reg_snapshot[this_cpu].i7 = 0;
-
+		global_reg_snapshot[this_cpu].rpc = 0;
+	}
 	global_reg_snapshot[this_cpu].thread = tp;
 }
 
@@ -341,7 +282,7 @@ static void __global_reg_poll(struct global_reg_snapshot *gp)
 	}
 }
 
-static void sysrq_handle_globreg(int key, struct tty_struct *tty)
+void __trigger_all_cpu_backtrace(void)
 {
 	struct thread_info *tp = current_thread_info();
 	struct pt_regs *regs = get_irq_regs();
@@ -375,13 +316,14 @@ static void sysrq_handle_globreg(int key, struct tty_struct *tty)
 		       ((tp && tp->task) ? tp->task->pid : -1));
 
 		if (gp->tstate & TSTATE_PRIV) {
-			printk("             TPC[%pS] O7[%pS] I7[%pS]\n",
+			printk("             TPC[%pS] O7[%pS] I7[%pS] RPC[%pS]\n",
 			       (void *) gp->tpc,
 			       (void *) gp->o7,
-			       (void *) gp->i7);
+			       (void *) gp->i7,
+			       (void *) gp->rpc);
 		} else {
-			printk("             TPC[%lx] O7[%lx] I7[%lx]\n",
-			       gp->tpc, gp->o7, gp->i7);
+			printk("             TPC[%lx] O7[%lx] I7[%lx] RPC[%lx]\n",
+			       gp->tpc, gp->o7, gp->i7, gp->rpc);
 		}
 	}
 
@@ -390,6 +332,13 @@ static void sysrq_handle_globreg(int key, struct tty_struct *tty)
 	spin_unlock_irqrestore(&global_reg_snapshot_lock, flags);
 }
 
+#ifdef CONFIG_MAGIC_SYSRQ
+
+static void sysrq_handle_globreg(int key, struct tty_struct *tty)
+{
+	__trigger_all_cpu_backtrace();
+}
+
 static struct sysrq_key_op sparc_globalreg_op = {
 	.handler	= sysrq_handle_globreg,
 	.help_msg	= "Globalregs",
@@ -868,7 +817,7 @@ out:
 unsigned long get_wchan(struct task_struct *task)
 {
 	unsigned long pc, fp, bias = 0;
-	unsigned long thread_info_base;
+	struct thread_info *tp;
 	struct reg_window *rw;
         unsigned long ret = 0;
 	int count = 0; 
@@ -877,14 +826,12 @@ unsigned long get_wchan(struct task_struct *task)
             task->state == TASK_RUNNING)
 		goto out;
 
-	thread_info_base = (unsigned long) task_stack_page(task);
+	tp = task_thread_info(task);
 	bias = STACK_BIAS;
 	fp = task_thread_info(task)->ksp + bias;
 
 	do {
-		/* Bogus frame pointer? */
-		if (fp < (thread_info_base + sizeof(struct thread_info)) ||
-		    fp >= (thread_info_base + THREAD_SIZE))
+		if (!kstack_valid(tp, fp))
 			break;
 		rw = (struct reg_window *) fp;
 		pc = rw->ins[7];
diff --git a/arch/sparc64/kernel/prom.c b/arch/sparc64/kernel/prom.c
index ed03a18d3b36..3c048ac4e638 100644
--- a/arch/sparc64/kernel/prom.c
+++ b/arch/sparc64/kernel/prom.c
@@ -21,9 +21,9 @@
 #include <linux/mm.h>
 #include <linux/module.h>
 #include <linux/lmb.h>
+#include <linux/of_device.h>
 
 #include <asm/prom.h>
-#include <asm/of_device.h>
 #include <asm/oplib.h>
 #include <asm/irq.h>
 #include <asm/asi.h>
diff --git a/arch/sparc64/kernel/ptrace.c b/arch/sparc64/kernel/ptrace.c
index f6c9fc92921d..bd578cc4856d 100644
--- a/arch/sparc64/kernel/ptrace.c
+++ b/arch/sparc64/kernel/ptrace.c
@@ -23,6 +23,7 @@
 #include <linux/audit.h>
 #include <linux/signal.h>
 #include <linux/regset.h>
+#include <linux/tracehook.h>
 #include <linux/compat.h>
 #include <linux/elf.h>
 
@@ -1049,8 +1050,10 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data)
 	return ret;
 }
 
-asmlinkage void syscall_trace(struct pt_regs *regs, int syscall_exit_p)
+asmlinkage int syscall_trace(struct pt_regs *regs, int syscall_exit_p)
 {
+	int ret = 0;
+
 	/* do the secure computing check first */
 	secure_computing(regs->u_regs[UREG_G1]);
 
@@ -1064,27 +1067,14 @@ asmlinkage void syscall_trace(struct pt_regs *regs, int syscall_exit_p)
 		audit_syscall_exit(result, regs->u_regs[UREG_I0]);
 	}
 
-	if (!(current->ptrace & PT_PTRACED))
-		goto out;
-
-	if (!test_thread_flag(TIF_SYSCALL_TRACE))
-		goto out;
-
-	ptrace_notify(SIGTRAP | ((current->ptrace & PT_TRACESYSGOOD)
-				 ? 0x80 : 0));
-
-	/*
-	 * this isn't the same as continuing with a signal, but it will do
-	 * for normal use.  strace only continues with a signal if the
-	 * stopping signal is not SIGTRAP.  -brl
-	 */
-	if (current->exit_code) {
-		send_sig(current->exit_code, current, 1);
-		current->exit_code = 0;
+	if (test_thread_flag(TIF_SYSCALL_TRACE)) {
+		if (syscall_exit_p)
+			tracehook_report_syscall_exit(regs, 0);
+		else
+			ret = tracehook_report_syscall_entry(regs);
 	}
 
-out:
-	if (unlikely(current->audit_context) && !syscall_exit_p)
+	if (unlikely(current->audit_context) && !syscall_exit_p && !ret)
 		audit_syscall_entry((test_thread_flag(TIF_32BIT) ?
 				     AUDIT_ARCH_SPARC :
 				     AUDIT_ARCH_SPARC64),
@@ -1093,4 +1083,6 @@ out:
 				    regs->u_regs[UREG_I1],
 				    regs->u_regs[UREG_I2],
 				    regs->u_regs[UREG_I3]);
+
+	return ret;
 }
diff --git a/arch/sparc64/kernel/rtrap.S b/arch/sparc64/kernel/rtrap.S
index c6fc695fe1fe..97a993c1f7f3 100644
--- a/arch/sparc64/kernel/rtrap.S
+++ b/arch/sparc64/kernel/rtrap.S
@@ -46,7 +46,7 @@ __handle_user_windows:
 		wrpr			%g0, RTRAP_PSTATE_IRQOFF, %pstate
 		ldx			[%g6 + TI_FLAGS], %l0
 
-1:		andcc			%l0, _TIF_SIGPENDING, %g0
+1:		andcc			%l0, _TIF_DO_NOTIFY_RESUME_MASK, %g0
 		be,pt			%xcc, __handle_user_windows_continue
 		 nop
 		mov			%l5, %o1
@@ -86,7 +86,7 @@ __handle_perfctrs:
 		 wrpr			%g0, RTRAP_PSTATE, %pstate
 		wrpr			%g0, RTRAP_PSTATE_IRQOFF, %pstate
 		ldx			[%g6 + TI_FLAGS], %l0
-1:		andcc			%l0, _TIF_SIGPENDING, %g0
+1:		andcc			%l0, _TIF_DO_NOTIFY_RESUME_MASK, %g0
 
 		be,pt			%xcc, __handle_perfctrs_continue
 		 sethi			%hi(TSTATE_PEF), %o0
@@ -195,7 +195,7 @@ __handle_preemption_continue:
 		 andcc			%l1, %o0, %g0
 		andcc			%l0, _TIF_NEED_RESCHED, %g0
 		bne,pn			%xcc, __handle_preemption
-		 andcc			%l0, _TIF_SIGPENDING, %g0
+		 andcc			%l0, _TIF_DO_NOTIFY_RESUME_MASK, %g0
 		bne,pn			%xcc, __handle_signal
 __handle_signal_continue:
 		 ldub			[%g6 + TI_WSAVED], %o2
diff --git a/arch/sparc64/kernel/signal.c b/arch/sparc64/kernel/signal.c
index 9667e96fd513..ec82d76dc6f2 100644
--- a/arch/sparc64/kernel/signal.c
+++ b/arch/sparc64/kernel/signal.c
@@ -2,7 +2,7 @@
  *  arch/sparc64/kernel/signal.c
  *
  *  Copyright (C) 1991, 1992  Linus Torvalds
- *  Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
+ *  Copyright (C) 1995, 2008 David S. Miller (davem@davemloft.net)
  *  Copyright (C) 1996 Miguel de Icaza (miguel@nuclecu.unam.mx)
  *  Copyright (C) 1997 Eddie C. Dost   (ecd@skynet.be)
  *  Copyright (C) 1997,1998 Jakub Jelinek   (jj@sunsite.mff.cuni.cz)
@@ -17,6 +17,7 @@
 #include <linux/errno.h>
 #include <linux/wait.h>
 #include <linux/ptrace.h>
+#include <linux/tracehook.h>
 #include <linux/unistd.h>
 #include <linux/mm.h>
 #include <linux/tty.h>
@@ -89,7 +90,9 @@ asmlinkage void sparc64_set_context(struct pt_regs *regs)
 	err |= __get_user(regs->u_regs[UREG_G4], (&(*grp)[MC_G4]));
 	err |= __get_user(regs->u_regs[UREG_G5], (&(*grp)[MC_G5]));
 	err |= __get_user(regs->u_regs[UREG_G6], (&(*grp)[MC_G6]));
-	err |= __get_user(regs->u_regs[UREG_G7], (&(*grp)[MC_G7]));
+
+	/* Skip %g7 as that's the thread register in userspace.  */
+
 	err |= __get_user(regs->u_regs[UREG_I0], (&(*grp)[MC_O0]));
 	err |= __get_user(regs->u_regs[UREG_I1], (&(*grp)[MC_O1]));
 	err |= __get_user(regs->u_regs[UREG_I2], (&(*grp)[MC_O2]));
@@ -574,6 +577,8 @@ static void do_signal(struct pt_regs *regs, unsigned long orig_i0)
 		 * clear the TS_RESTORE_SIGMASK flag.
 		 */
 		current_thread_info()->status &= ~TS_RESTORE_SIGMASK;
+
+		tracehook_signal_handler(signr, &info, &ka, regs, 0);
 		return;
 	}
 	if (restart_syscall &&
@@ -605,4 +610,8 @@ void do_notify_resume(struct pt_regs *regs, unsigned long orig_i0, unsigned long
 {
 	if (thread_info_flags & _TIF_SIGPENDING)
 		do_signal(regs, orig_i0);
+	if (thread_info_flags & _TIF_NOTIFY_RESUME) {
+		clear_thread_flag(TIF_NOTIFY_RESUME);
+		tracehook_notify_resume(regs);
+	}
 }
diff --git a/arch/sparc64/kernel/signal32.c b/arch/sparc64/kernel/signal32.c
index 97cdd1bf4a10..ba5b09ad6666 100644
--- a/arch/sparc64/kernel/signal32.c
+++ b/arch/sparc64/kernel/signal32.c
@@ -19,6 +19,7 @@
 #include <linux/binfmts.h>
 #include <linux/compat.h>
 #include <linux/bitops.h>
+#include <linux/tracehook.h>
 
 #include <asm/uaccess.h>
 #include <asm/ptrace.h>
@@ -794,6 +795,8 @@ void do_signal32(sigset_t *oldset, struct pt_regs * regs,
 		 * clear the TS_RESTORE_SIGMASK flag.
 		 */
 		current_thread_info()->status &= ~TS_RESTORE_SIGMASK;
+
+		tracehook_signal_handler(signr, &info, &ka, regs, 0);
 		return;
 	}
 	if (restart_syscall &&
diff --git a/arch/sparc64/kernel/smp.c b/arch/sparc64/kernel/smp.c
index 7cf72b4bb108..743ccad61c60 100644
--- a/arch/sparc64/kernel/smp.c
+++ b/arch/sparc64/kernel/smp.c
@@ -459,27 +459,35 @@ again:
 	}
 }
 
-static inline void spitfire_xcall_deliver(u64 data0, u64 data1, u64 data2, cpumask_t mask)
+static void spitfire_xcall_deliver(struct trap_per_cpu *tb, int cnt)
 {
+	u64 *mondo, data0, data1, data2;
+	u16 *cpu_list;
 	u64 pstate;
 	int i;
 
 	__asm__ __volatile__("rdpr %%pstate, %0" : "=r" (pstate));
-	for_each_cpu_mask(i, mask)
-		spitfire_xcall_helper(data0, data1, data2, pstate, i);
+	cpu_list = __va(tb->cpu_list_pa);
+	mondo = __va(tb->cpu_mondo_block_pa);
+	data0 = mondo[0];
+	data1 = mondo[1];
+	data2 = mondo[2];
+	for (i = 0; i < cnt; i++)
+		spitfire_xcall_helper(data0, data1, data2, pstate, cpu_list[i]);
 }
 
 /* Cheetah now allows to send the whole 64-bytes of data in the interrupt
  * packet, but we have no use for that.  However we do take advantage of
  * the new pipelining feature (ie. dispatch to multiple cpus simultaneously).
  */
-static void cheetah_xcall_deliver(u64 data0, u64 data1, u64 data2, cpumask_t mask)
+static void cheetah_xcall_deliver(struct trap_per_cpu *tb, int cnt)
 {
-	u64 pstate, ver, busy_mask;
 	int nack_busy_id, is_jbus, need_more;
+	u64 *mondo, pstate, ver, busy_mask;
+	u16 *cpu_list;
 
-	if (cpus_empty(mask))
-		return;
+	cpu_list = __va(tb->cpu_list_pa);
+	mondo = __va(tb->cpu_mondo_block_pa);
 
 	/* Unfortunately, someone at Sun had the brilliant idea to make the
 	 * busy/nack fields hard-coded by ITID number for this Ultra-III
@@ -502,7 +510,7 @@ retry:
 			     "stxa	%2, [%5] %6\n\t"
 			     "membar	#Sync\n\t"
 			     : /* no outputs */
-			     : "r" (data0), "r" (data1), "r" (data2),
+			     : "r" (mondo[0]), "r" (mondo[1]), "r" (mondo[2]),
 			       "r" (0x40), "r" (0x50), "r" (0x60),
 			       "i" (ASI_INTR_W));
 
@@ -511,11 +519,16 @@ retry:
 	{
 		int i;
 
-		for_each_cpu_mask(i, mask) {
-			u64 target = (i << 14) | 0x70;
+		for (i = 0; i < cnt; i++) {
+			u64 target, nr;
 
+			nr = cpu_list[i];
+			if (nr == 0xffff)
+				continue;
+
+			target = (nr << 14) | 0x70;
 			if (is_jbus) {
-				busy_mask |= (0x1UL << (i * 2));
+				busy_mask |= (0x1UL << (nr * 2));
 			} else {
 				target |= (nack_busy_id << 24);
 				busy_mask |= (0x1UL <<
@@ -549,11 +562,13 @@ retry:
 				__asm__ __volatile__("wrpr %0, 0x0, %%pstate"
 						     : : "r" (pstate));
 				if (unlikely(need_more)) {
-					int i, cnt = 0;
-					for_each_cpu_mask(i, mask) {
-						cpu_clear(i, mask);
-						cnt++;
-						if (cnt == 32)
+					int i, this_cnt = 0;
+					for (i = 0; i < cnt; i++) {
+						if (cpu_list[i] == 0xffff)
+							continue;
+						cpu_list[i] = 0xffff;
+						this_cnt++;
+						if (this_cnt == 32)
 							break;
 					}
 					goto retry;
@@ -584,16 +599,20 @@ retry:
 			/* Clear out the mask bits for cpus which did not
 			 * NACK us.
 			 */
-			for_each_cpu_mask(i, mask) {
-				u64 check_mask;
+			for (i = 0; i < cnt; i++) {
+				u64 check_mask, nr;
+
+				nr = cpu_list[i];
+				if (nr == 0xffff)
+					continue;
 
 				if (is_jbus)
-					check_mask = (0x2UL << (2*i));
+					check_mask = (0x2UL << (2*nr));
 				else
 					check_mask = (0x2UL <<
 						      this_busy_nack);
 				if ((dispatch_stat & check_mask) == 0)
-					cpu_clear(i, mask);
+					cpu_list[i] = 0xffff;
 				this_busy_nack += 2;
 				if (this_busy_nack == 64)
 					break;
@@ -605,47 +624,17 @@ retry:
 }
 
 /* Multi-cpu list version.  */
-static void hypervisor_xcall_deliver(u64 data0, u64 data1, u64 data2, cpumask_t mask)
+static void hypervisor_xcall_deliver(struct trap_per_cpu *tb, int cnt)
 {
-	struct trap_per_cpu *tb;
+	int retries, this_cpu, prev_sent, i, saw_cpu_error;
+	unsigned long status;
 	u16 *cpu_list;
-	u64 *mondo;
-	cpumask_t error_mask;
-	unsigned long flags, status;
-	int cnt, retries, this_cpu, prev_sent, i;
-
-	if (cpus_empty(mask))
-		return;
-
-	/* We have to do this whole thing with interrupts fully disabled.
-	 * Otherwise if we send an xcall from interrupt context it will
-	 * corrupt both our mondo block and cpu list state.
-	 *
-	 * One consequence of this is that we cannot use timeout mechanisms
-	 * that depend upon interrupts being delivered locally.  So, for
-	 * example, we cannot sample jiffies and expect it to advance.
-	 *
-	 * Fortunately, udelay() uses %stick/%tick so we can use that.
-	 */
-	local_irq_save(flags);
 
 	this_cpu = smp_processor_id();
-	tb = &trap_block[this_cpu];
-
-	mondo = __va(tb->cpu_mondo_block_pa);
-	mondo[0] = data0;
-	mondo[1] = data1;
-	mondo[2] = data2;
-	wmb();
 
 	cpu_list = __va(tb->cpu_list_pa);
 
-	/* Setup the initial cpu list.  */
-	cnt = 0;
-	for_each_cpu_mask(i, mask)
-		cpu_list[cnt++] = i;
-
-	cpus_clear(error_mask);
+	saw_cpu_error = 0;
 	retries = 0;
 	prev_sent = 0;
 	do {
@@ -690,10 +679,9 @@ static void hypervisor_xcall_deliver(u64 data0, u64 data1, u64 data2, cpumask_t
 					continue;
 
 				err = sun4v_cpu_state(cpu);
-				if (err >= 0 &&
-				    err == HV_CPU_STATE_ERROR) {
+				if (err == HV_CPU_STATE_ERROR) {
+					saw_cpu_error = (cpu + 1);
 					cpu_list[i] = 0xffff;
-					cpu_set(cpu, error_mask);
 				}
 			}
 		} else if (unlikely(status != HV_EWOULDBLOCK))
@@ -717,32 +705,24 @@ static void hypervisor_xcall_deliver(u64 data0, u64 data1, u64 data2, cpumask_t
 		}
 	} while (1);
 
-	local_irq_restore(flags);
-
-	if (unlikely(!cpus_empty(error_mask)))
+	if (unlikely(saw_cpu_error))
 		goto fatal_mondo_cpu_error;
 
 	return;
 
 fatal_mondo_cpu_error:
 	printk(KERN_CRIT "CPU[%d]: SUN4V mondo cpu error, some target cpus "
-	       "were in error state\n",
-	       this_cpu);
-	printk(KERN_CRIT "CPU[%d]: Error mask [ ", this_cpu);
-	for_each_cpu_mask(i, error_mask)
-		printk("%d ", i);
-	printk("]\n");
+	       "(including %d) were in error state\n",
+	       this_cpu, saw_cpu_error - 1);
 	return;
 
 fatal_mondo_timeout:
-	local_irq_restore(flags);
 	printk(KERN_CRIT "CPU[%d]: SUN4V mondo timeout, no forward "
 	       " progress after %d retries.\n",
 	       this_cpu, retries);
 	goto dump_cpu_list_and_out;
 
 fatal_mondo_error:
-	local_irq_restore(flags);
 	printk(KERN_CRIT "CPU[%d]: Unexpected SUN4V mondo error %lu\n",
 	       this_cpu, status);
 	printk(KERN_CRIT "CPU[%d]: Args were cnt(%d) cpulist_pa(%lx) "
@@ -756,58 +736,93 @@ dump_cpu_list_and_out:
 	printk("]\n");
 }
 
-/* Send cross call to all processors mentioned in MASK
- * except self.
+static void (*xcall_deliver_impl)(struct trap_per_cpu *, int);
+
+static void xcall_deliver(u64 data0, u64 data1, u64 data2, const cpumask_t *mask)
+{
+	struct trap_per_cpu *tb;
+	int this_cpu, i, cnt;
+	unsigned long flags;
+	u16 *cpu_list;
+	u64 *mondo;
+
+	/* We have to do this whole thing with interrupts fully disabled.
+	 * Otherwise if we send an xcall from interrupt context it will
+	 * corrupt both our mondo block and cpu list state.
+	 *
+	 * One consequence of this is that we cannot use timeout mechanisms
+	 * that depend upon interrupts being delivered locally.  So, for
+	 * example, we cannot sample jiffies and expect it to advance.
+	 *
+	 * Fortunately, udelay() uses %stick/%tick so we can use that.
+	 */
+	local_irq_save(flags);
+
+	this_cpu = smp_processor_id();
+	tb = &trap_block[this_cpu];
+
+	mondo = __va(tb->cpu_mondo_block_pa);
+	mondo[0] = data0;
+	mondo[1] = data1;
+	mondo[2] = data2;
+	wmb();
+
+	cpu_list = __va(tb->cpu_list_pa);
+
+	/* Setup the initial cpu list.  */
+	cnt = 0;
+	for_each_cpu_mask_nr(i, *mask) {
+		if (i == this_cpu || !cpu_online(i))
+			continue;
+		cpu_list[cnt++] = i;
+	}
+
+	if (cnt)
+		xcall_deliver_impl(tb, cnt);
+
+	local_irq_restore(flags);
+}
+
+/* Send cross call to all processors mentioned in MASK_P
+ * except self.  Really, there are only two cases currently,
+ * "&cpu_online_map" and "&mm->cpu_vm_mask".
  */
-static void smp_cross_call_masked(unsigned long *func, u32 ctx, u64 data1, u64 data2, cpumask_t mask)
+static void smp_cross_call_masked(unsigned long *func, u32 ctx, u64 data1, u64 data2, const cpumask_t *mask)
 {
 	u64 data0 = (((u64)ctx)<<32 | (((u64)func) & 0xffffffff));
-	int this_cpu = get_cpu();
 
-	cpus_and(mask, mask, cpu_online_map);
-	cpu_clear(this_cpu, mask);
-
-	if (tlb_type == spitfire)
-		spitfire_xcall_deliver(data0, data1, data2, mask);
-	else if (tlb_type == cheetah || tlb_type == cheetah_plus)
-		cheetah_xcall_deliver(data0, data1, data2, mask);
-	else
-		hypervisor_xcall_deliver(data0, data1, data2, mask);
-	/* NOTE: Caller runs local copy on master. */
+	xcall_deliver(data0, data1, data2, mask);
+}
 
-	put_cpu();
+/* Send cross call to all processors except self. */
+static void smp_cross_call(unsigned long *func, u32 ctx, u64 data1, u64 data2)
+{
+	smp_cross_call_masked(func, ctx, data1, data2, &cpu_online_map);
 }
 
 extern unsigned long xcall_sync_tick;
 
 static void smp_start_sync_tick_client(int cpu)
 {
-	cpumask_t mask = cpumask_of_cpu(cpu);
-
-	smp_cross_call_masked(&xcall_sync_tick,
-			      0, 0, 0, mask);
+	xcall_deliver((u64) &xcall_sync_tick, 0, 0,
+		      &cpumask_of_cpu(cpu));
 }
 
 extern unsigned long xcall_call_function;
 
 void arch_send_call_function_ipi(cpumask_t mask)
 {
-	smp_cross_call_masked(&xcall_call_function, 0, 0, 0, mask);
+	xcall_deliver((u64) &xcall_call_function, 0, 0, &mask);
 }
 
 extern unsigned long xcall_call_function_single;
 
 void arch_send_call_function_single_ipi(int cpu)
 {
-	cpumask_t mask = cpumask_of_cpu(cpu);
-
-	smp_cross_call_masked(&xcall_call_function_single, 0, 0, 0, mask);
+	xcall_deliver((u64) &xcall_call_function_single, 0, 0,
+		      &cpumask_of_cpu(cpu));
 }
 
-/* Send cross call to all processors except self. */
-#define smp_cross_call(func, ctx, data1, data2) \
-	smp_cross_call_masked(func, ctx, data1, data2, cpu_online_map)
-
 void smp_call_function_client(int irq, struct pt_regs *regs)
 {
 	clear_softint(1 << irq);
@@ -843,10 +858,7 @@ void smp_tsb_sync(struct mm_struct *mm)
 extern unsigned long xcall_flush_tlb_mm;
 extern unsigned long xcall_flush_tlb_pending;
 extern unsigned long xcall_flush_tlb_kernel_range;
-extern unsigned long xcall_report_regs;
-#ifdef CONFIG_MAGIC_SYSRQ
 extern unsigned long xcall_fetch_glob_regs;
-#endif
 extern unsigned long xcall_receive_signal;
 extern unsigned long xcall_new_mmu_context_version;
 #ifdef CONFIG_KGDB
@@ -878,7 +890,6 @@ static inline void __local_flush_dcache_page(struct page *page)
 
 void smp_flush_dcache_page_impl(struct page *page, int cpu)
 {
-	cpumask_t mask = cpumask_of_cpu(cpu);
 	int this_cpu;
 
 	if (tlb_type == hypervisor)
@@ -894,29 +905,24 @@ void smp_flush_dcache_page_impl(struct page *page, int cpu)
 		__local_flush_dcache_page(page);
 	} else if (cpu_online(cpu)) {
 		void *pg_addr = page_address(page);
-		u64 data0;
+		u64 data0 = 0;
 
 		if (tlb_type == spitfire) {
-			data0 =
-				((u64)&xcall_flush_dcache_page_spitfire);
+			data0 = ((u64)&xcall_flush_dcache_page_spitfire);
 			if (page_mapping(page) != NULL)
 				data0 |= ((u64)1 << 32);
-			spitfire_xcall_deliver(data0,
-					       __pa(pg_addr),
-					       (u64) pg_addr,
-					       mask);
 		} else if (tlb_type == cheetah || tlb_type == cheetah_plus) {
 #ifdef DCACHE_ALIASING_POSSIBLE
-			data0 =
-				((u64)&xcall_flush_dcache_page_cheetah);
-			cheetah_xcall_deliver(data0,
-					      __pa(pg_addr),
-					      0, mask);
+			data0 =	((u64)&xcall_flush_dcache_page_cheetah);
 #endif
 		}
+		if (data0) {
+			xcall_deliver(data0, __pa(pg_addr),
+				      (u64) pg_addr, &cpumask_of_cpu(cpu));
 #ifdef CONFIG_DEBUG_DCFLUSH
-		atomic_inc(&dcpage_flushes_xcall);
+			atomic_inc(&dcpage_flushes_xcall);
 #endif
+		}
 	}
 
 	put_cpu();
@@ -924,66 +930,41 @@ void smp_flush_dcache_page_impl(struct page *page, int cpu)
 
 void flush_dcache_page_all(struct mm_struct *mm, struct page *page)
 {
-	void *pg_addr = page_address(page);
-	cpumask_t mask = cpu_online_map;
-	u64 data0;
+	void *pg_addr;
 	int this_cpu;
+	u64 data0;
 
 	if (tlb_type == hypervisor)
 		return;
 
 	this_cpu = get_cpu();
 
-	cpu_clear(this_cpu, mask);
-
 #ifdef CONFIG_DEBUG_DCFLUSH
 	atomic_inc(&dcpage_flushes);
 #endif
-	if (cpus_empty(mask))
-		goto flush_self;
+	data0 = 0;
+	pg_addr = page_address(page);
 	if (tlb_type == spitfire) {
 		data0 = ((u64)&xcall_flush_dcache_page_spitfire);
 		if (page_mapping(page) != NULL)
 			data0 |= ((u64)1 << 32);
-		spitfire_xcall_deliver(data0,
-				       __pa(pg_addr),
-				       (u64) pg_addr,
-				       mask);
 	} else if (tlb_type == cheetah || tlb_type == cheetah_plus) {
 #ifdef DCACHE_ALIASING_POSSIBLE
 		data0 = ((u64)&xcall_flush_dcache_page_cheetah);
-		cheetah_xcall_deliver(data0,
-				      __pa(pg_addr),
-				      0, mask);
 #endif
 	}
+	if (data0) {
+		xcall_deliver(data0, __pa(pg_addr),
+			      (u64) pg_addr, &cpu_online_map);
 #ifdef CONFIG_DEBUG_DCFLUSH
-	atomic_inc(&dcpage_flushes_xcall);
+		atomic_inc(&dcpage_flushes_xcall);
 #endif
- flush_self:
+	}
 	__local_flush_dcache_page(page);
 
 	put_cpu();
 }
 
-static void __smp_receive_signal_mask(cpumask_t mask)
-{
-	smp_cross_call_masked(&xcall_receive_signal, 0, 0, 0, mask);
-}
-
-void smp_receive_signal(int cpu)
-{
-	cpumask_t mask = cpumask_of_cpu(cpu);
-
-	if (cpu_online(cpu))
-		__smp_receive_signal_mask(mask);
-}
-
-void smp_receive_signal_client(int irq, struct pt_regs *regs)
-{
-	clear_softint(1 << irq);
-}
-
 void smp_new_mmu_context_version_client(int irq, struct pt_regs *regs)
 {
 	struct mm_struct *mm;
@@ -1022,17 +1003,10 @@ void kgdb_roundup_cpus(unsigned long flags)
 }
 #endif
 
-void smp_report_regs(void)
-{
-	smp_cross_call(&xcall_report_regs, 0, 0, 0);
-}
-
-#ifdef CONFIG_MAGIC_SYSRQ
 void smp_fetch_global_regs(void)
 {
 	smp_cross_call(&xcall_fetch_glob_regs, 0, 0, 0);
 }
-#endif
 
 /* We know that the window frames of the user have been flushed
  * to the stack before we get here because all callers of us
@@ -1089,7 +1063,7 @@ void smp_flush_tlb_mm(struct mm_struct *mm)
 
 	smp_cross_call_masked(&xcall_flush_tlb_mm,
 			      ctx, 0, 0,
-			      mm->cpu_vm_mask);
+			      &mm->cpu_vm_mask);
 
 local_flush_and_out:
 	__flush_tlb_mm(ctx, SECONDARY_CONTEXT);
@@ -1107,7 +1081,7 @@ void smp_flush_tlb_pending(struct mm_struct *mm, unsigned long nr, unsigned long
 	else
 		smp_cross_call_masked(&xcall_flush_tlb_pending,
 				      ctx, nr, (unsigned long) vaddrs,
-				      mm->cpu_vm_mask);
+				      &mm->cpu_vm_mask);
 
 	__flush_tlb_pending(ctx, nr, vaddrs);
 
@@ -1208,6 +1182,16 @@ void __devinit smp_prepare_boot_cpu(void)
 {
 }
 
+void __init smp_setup_processor_id(void)
+{
+	if (tlb_type == spitfire)
+		xcall_deliver_impl = spitfire_xcall_deliver;
+	else if (tlb_type == cheetah || tlb_type == cheetah_plus)
+		xcall_deliver_impl = cheetah_xcall_deliver;
+	else
+		xcall_deliver_impl = hypervisor_xcall_deliver;
+}
+
 void __devinit smp_fill_in_sib_core_maps(void)
 {
 	unsigned int i;
@@ -1376,7 +1360,13 @@ void __init smp_cpus_done(unsigned int max_cpus)
 
 void smp_send_reschedule(int cpu)
 {
-	smp_receive_signal(cpu);
+	xcall_deliver((u64) &xcall_receive_signal, 0, 0,
+		      &cpumask_of_cpu(cpu));
+}
+
+void smp_receive_signal_client(int irq, struct pt_regs *regs)
+{
+	clear_softint(1 << irq);
 }
 
 /* This is a nop because we capture all other cpus
diff --git a/arch/sparc64/kernel/sparc64_ksyms.c b/arch/sparc64/kernel/sparc64_ksyms.c
index 504e678ee128..0804f71df6cb 100644
--- a/arch/sparc64/kernel/sparc64_ksyms.c
+++ b/arch/sparc64/kernel/sparc64_ksyms.c
@@ -68,7 +68,6 @@ extern void *__memscan_zero(void *, size_t);
 extern void *__memscan_generic(void *, int, size_t);
 extern int __memcmp(const void *, const void *, __kernel_size_t);
 extern __kernel_size_t strlen(const char *);
-extern void show_regs(struct pt_regs *);
 extern void syscall_trace(struct pt_regs *, int);
 extern void sys_sigsuspend(void);
 extern int compat_sys_ioctl(unsigned int fd, unsigned int cmd, u32 arg);
diff --git a/arch/sparc64/kernel/stacktrace.c b/arch/sparc64/kernel/stacktrace.c
index b3e3737750d8..4e21d4a57d3b 100644
--- a/arch/sparc64/kernel/stacktrace.c
+++ b/arch/sparc64/kernel/stacktrace.c
@@ -5,10 +5,12 @@
 #include <asm/ptrace.h>
 #include <asm/stacktrace.h>
 
+#include "kstack.h"
+
 void save_stack_trace(struct stack_trace *trace)
 {
-	unsigned long ksp, fp, thread_base;
 	struct thread_info *tp = task_thread_info(current);
+	unsigned long ksp, fp;
 
 	stack_trace_flush();
 
@@ -18,21 +20,18 @@ void save_stack_trace(struct stack_trace *trace)
 	);
 
 	fp = ksp + STACK_BIAS;
-	thread_base = (unsigned long) tp;
 	do {
 		struct sparc_stackf *sf;
 		struct pt_regs *regs;
 		unsigned long pc;
 
-		/* Bogus frame pointer? */
-		if (fp < (thread_base + sizeof(struct thread_info)) ||
-		    fp >= (thread_base + THREAD_SIZE))
+		if (!kstack_valid(tp, fp))
 			break;
 
 		sf = (struct sparc_stackf *) fp;
 		regs = (struct pt_regs *) (sf + 1);
 
-		if ((regs->magic & ~0x1ff) == PT_REGS_MAGIC) {
+		if (kstack_is_trap_frame(tp, regs)) {
 			if (!(regs->tstate & TSTATE_PRIV))
 				break;
 			pc = regs->tpc;
diff --git a/arch/sparc64/kernel/sys_sparc32.c b/arch/sparc64/kernel/sys_sparc32.c
index 97b77fb5c50e..3d118531baff 100644
--- a/arch/sparc64/kernel/sys_sparc32.c
+++ b/arch/sparc64/kernel/sys_sparc32.c
@@ -58,182 +58,6 @@
 #include <asm/mmu_context.h>
 #include <asm/compat_signal.h>
 
-asmlinkage long sys32_chown16(const char __user * filename, u16 user, u16 group)
-{
-	return sys_chown(filename, low2highuid(user), low2highgid(group));
-}
-
-asmlinkage long sys32_lchown16(const char __user * filename, u16 user, u16 group)
-{
-	return sys_lchown(filename, low2highuid(user), low2highgid(group));
-}
-
-asmlinkage long sys32_fchown16(unsigned int fd, u16 user, u16 group)
-{
-	return sys_fchown(fd, low2highuid(user), low2highgid(group));
-}
-
-asmlinkage long sys32_setregid16(u16 rgid, u16 egid)
-{
-	return sys_setregid(low2highgid(rgid), low2highgid(egid));
-}
-
-asmlinkage long sys32_setgid16(u16 gid)
-{
-	return sys_setgid((gid_t)gid);
-}
-
-asmlinkage long sys32_setreuid16(u16 ruid, u16 euid)
-{
-	return sys_setreuid(low2highuid(ruid), low2highuid(euid));
-}
-
-asmlinkage long sys32_setuid16(u16 uid)
-{
-	return sys_setuid((uid_t)uid);
-}
-
-asmlinkage long sys32_setresuid16(u16 ruid, u16 euid, u16 suid)
-{
-	return sys_setresuid(low2highuid(ruid), low2highuid(euid),
-		low2highuid(suid));
-}
-
-asmlinkage long sys32_getresuid16(u16 __user *ruid, u16 __user *euid, u16 __user *suid)
-{
-	int retval;
-
-	if (!(retval = put_user(high2lowuid(current->uid), ruid)) &&
-	    !(retval = put_user(high2lowuid(current->euid), euid)))
-		retval = put_user(high2lowuid(current->suid), suid);
-
-	return retval;
-}
-
-asmlinkage long sys32_setresgid16(u16 rgid, u16 egid, u16 sgid)
-{
-	return sys_setresgid(low2highgid(rgid), low2highgid(egid),
-		low2highgid(sgid));
-}
-
-asmlinkage long sys32_getresgid16(u16 __user *rgid, u16 __user *egid, u16 __user *sgid)
-{
-	int retval;
-
-	if (!(retval = put_user(high2lowgid(current->gid), rgid)) &&
-	    !(retval = put_user(high2lowgid(current->egid), egid)))
-		retval = put_user(high2lowgid(current->sgid), sgid);
-
-	return retval;
-}
-
-asmlinkage long sys32_setfsuid16(u16 uid)
-{
-	return sys_setfsuid((uid_t)uid);
-}
-
-asmlinkage long sys32_setfsgid16(u16 gid)
-{
-	return sys_setfsgid((gid_t)gid);
-}
-
-static int groups16_to_user(u16 __user *grouplist, struct group_info *group_info)
-{
-	int i;
-	u16 group;
-
-	for (i = 0; i < group_info->ngroups; i++) {
-		group = (u16)GROUP_AT(group_info, i);
-		if (put_user(group, grouplist+i))
-			return -EFAULT;
-	}
-
-	return 0;
-}
-
-static int groups16_from_user(struct group_info *group_info, u16 __user *grouplist)
-{
-	int i;
-	u16 group;
-
-	for (i = 0; i < group_info->ngroups; i++) {
-		if (get_user(group, grouplist+i))
-			return  -EFAULT;
-		GROUP_AT(group_info, i) = (gid_t)group;
-	}
-
-	return 0;
-}
-
-asmlinkage long sys32_getgroups16(int gidsetsize, u16 __user *grouplist)
-{
-	int i;
-
-	if (gidsetsize < 0)
-		return -EINVAL;
-
-	get_group_info(current->group_info);
-	i = current->group_info->ngroups;
-	if (gidsetsize) {
-		if (i > gidsetsize) {
-			i = -EINVAL;
-			goto out;
-		}
-		if (groups16_to_user(grouplist, current->group_info)) {
-			i = -EFAULT;
-			goto out;
-		}
-	}
-out:
-	put_group_info(current->group_info);
-	return i;
-}
-
-asmlinkage long sys32_setgroups16(int gidsetsize, u16 __user *grouplist)
-{
-	struct group_info *group_info;
-	int retval;
-
-	if (!capable(CAP_SETGID))
-		return -EPERM;
-	if ((unsigned)gidsetsize > NGROUPS_MAX)
-		return -EINVAL;
-
-	group_info = groups_alloc(gidsetsize);
-	if (!group_info)
-		return -ENOMEM;
-	retval = groups16_from_user(group_info, grouplist);
-	if (retval) {
-		put_group_info(group_info);
-		return retval;
-	}
-
-	retval = set_current_groups(group_info);
-	put_group_info(group_info);
-
-	return retval;
-}
-
-asmlinkage long sys32_getuid16(void)
-{
-	return high2lowuid(current->uid);
-}
-
-asmlinkage long sys32_geteuid16(void)
-{
-	return high2lowuid(current->euid);
-}
-
-asmlinkage long sys32_getgid16(void)
-{
-	return high2lowgid(current->gid);
-}
-
-asmlinkage long sys32_getegid16(void)
-{
-	return high2lowgid(current->egid);
-}
-
 /* 32-bit timeval and related flotsam.  */
 
 static inline long put_tv32(struct compat_timeval __user *o, struct timeval *i)
diff --git a/arch/sparc64/kernel/syscalls.S b/arch/sparc64/kernel/syscalls.S
index db19ed67acf6..a2f24270ed8a 100644
--- a/arch/sparc64/kernel/syscalls.S
+++ b/arch/sparc64/kernel/syscalls.S
@@ -162,6 +162,8 @@ linux_syscall_trace32:
 	add	%sp, PTREGS_OFF, %o0
 	call	syscall_trace
 	 clr	%o1
+	brnz,pn	%o0, 3f
+	 mov	-ENOSYS, %o0
 	srl	%i0, 0, %o0
 	srl	%i4, 0, %o4
 	srl	%i1, 0, %o1
@@ -173,6 +175,8 @@ linux_syscall_trace:
 	add	%sp, PTREGS_OFF, %o0
 	call	syscall_trace
 	 clr	%o1
+	brnz,pn	%o0, 3f
+	 mov	-ENOSYS, %o0
 	mov	%i0, %o0
 	mov	%i1, %o1
 	mov	%i2, %o2
diff --git a/arch/sparc64/kernel/systbls.S b/arch/sparc64/kernel/systbls.S
index 8b5282d433c4..0fdbf3ba956e 100644
--- a/arch/sparc64/kernel/systbls.S
+++ b/arch/sparc64/kernel/systbls.S
@@ -20,21 +20,21 @@
 sys_call_table32:
 /*0*/	.word sys_restart_syscall, sys32_exit, sys_fork, sys_read, sys_write
 /*5*/	.word sys32_open, sys_close, sys32_wait4, sys32_creat, sys_link
-/*10*/  .word sys_unlink, sunos_execv, sys_chdir, sys32_chown16, sys32_mknod
-/*15*/	.word sys_chmod, sys32_lchown16, sparc_brk, sys32_perfctr, sys32_lseek
-/*20*/	.word sys_getpid, sys_capget, sys_capset, sys32_setuid16, sys32_getuid16
+/*10*/  .word sys_unlink, sunos_execv, sys_chdir, sys_chown16, sys32_mknod
+/*15*/	.word sys_chmod, sys_lchown16, sparc_brk, sys32_perfctr, sys32_lseek
+/*20*/	.word sys_getpid, sys_capget, sys_capset, sys_setuid16, sys_getuid16
 /*25*/	.word sys32_vmsplice, compat_sys_ptrace, sys_alarm, sys32_sigaltstack, sys32_pause
 /*30*/	.word compat_sys_utime, sys_lchown, sys_fchown, sys32_access, sys32_nice
 	.word sys_chown, sys_sync, sys32_kill, compat_sys_newstat, sys32_sendfile
 /*40*/	.word compat_sys_newlstat, sys_dup, sys_pipe, compat_sys_times, sys_getuid
-	.word sys32_umount, sys32_setgid16, sys32_getgid16, sys32_signal, sys32_geteuid16
-/*50*/	.word sys32_getegid16, sys_acct, sys_nis_syscall, sys_getgid, compat_sys_ioctl
+	.word sys32_umount, sys_setgid16, sys_getgid16, sys32_signal, sys_geteuid16
+/*50*/	.word sys_getegid16, sys_acct, sys_nis_syscall, sys_getgid, compat_sys_ioctl
 	.word sys32_reboot, sys32_mmap2, sys_symlink, sys32_readlink, sys32_execve
 /*60*/	.word sys32_umask, sys_chroot, compat_sys_newfstat, compat_sys_fstat64, sys_getpagesize
 	.word sys32_msync, sys_vfork, sys32_pread64, sys32_pwrite64, sys_geteuid
 /*70*/	.word sys_getegid, sys_mmap, sys_setreuid, sys_munmap, sys_mprotect
-	.word sys_madvise, sys_vhangup, sys32_truncate64, sys_mincore, sys32_getgroups16
-/*80*/	.word sys32_setgroups16, sys_getpgrp, sys32_setgroups, sys32_setitimer, sys32_ftruncate64
+	.word sys_madvise, sys_vhangup, sys32_truncate64, sys_mincore, sys_getgroups16
+/*80*/	.word sys_setgroups16, sys_getpgrp, sys32_setgroups, sys32_setitimer, sys32_ftruncate64
 	.word sys32_swapon, sys32_getitimer, sys_setuid, sys32_sethostname, sys_setgid
 /*90*/	.word sys_dup2, sys_setfsuid, compat_sys_fcntl, sys32_select, sys_setfsgid
 	.word sys_fsync, sys32_setpriority, sys_nis_syscall, sys_nis_syscall, sys_nis_syscall
@@ -42,8 +42,8 @@ sys_call_table32:
 	.word compat_sys_rt_sigtimedwait, sys32_rt_sigqueueinfo, compat_sys_rt_sigsuspend, sys_setresuid, sys_getresuid
 /*110*/	.word sys_setresgid, sys_getresgid, sys_setregid, sys_nis_syscall, sys_nis_syscall
 	.word sys32_getgroups, sys32_gettimeofday, sys32_getrusage, sys_nis_syscall, sys_getcwd
-/*120*/	.word compat_sys_readv, compat_sys_writev, sys32_settimeofday, sys32_fchown16, sys_fchmod
-	.word sys_nis_syscall, sys32_setreuid16, sys32_setregid16, sys_rename, sys_truncate
+/*120*/	.word compat_sys_readv, compat_sys_writev, sys32_settimeofday, sys_fchown16, sys_fchmod
+	.word sys_nis_syscall, sys_setreuid16, sys_setregid16, sys_rename, sys_truncate
 /*130*/	.word sys_ftruncate, sys_flock, compat_sys_lstat64, sys_nis_syscall, sys_nis_syscall
 	.word sys_nis_syscall, sys32_mkdir, sys_rmdir, compat_sys_utimes, compat_sys_stat64
 /*140*/	.word sys32_sendfile64, sys_nis_syscall, sys32_futex, sys_gettid, compat_sys_getrlimit
@@ -63,7 +63,7 @@ sys_call_table32:
 /*210*/	.word sys32_fadvise64_64, sys32_tgkill, sys32_waitpid, sys_swapoff, compat_sys_sysinfo
 	.word compat_sys_ipc, sys32_sigreturn, sys_clone, sys32_ioprio_get, compat_sys_adjtimex
 /*220*/	.word sys32_sigprocmask, sys_ni_syscall, sys32_delete_module, sys_ni_syscall, sys32_getpgid
-	.word sys32_bdflush, sys32_sysfs, sys_nis_syscall, sys32_setfsuid16, sys32_setfsgid16
+	.word sys32_bdflush, sys32_sysfs, sys_nis_syscall, sys_setfsuid16, sys_setfsgid16
 /*230*/	.word sys32_select, compat_sys_time, sys32_splice, compat_sys_stime, compat_sys_statfs64
 	.word compat_sys_fstatfs64, sys_llseek, sys_mlock, sys_munlock, sys32_mlockall
 /*240*/	.word sys_munlockall, sys32_sched_setparam, sys32_sched_getparam, sys32_sched_setscheduler, sys32_sched_getscheduler
@@ -81,7 +81,8 @@ sys_call_table32:
 /*300*/	.word compat_sys_set_robust_list, compat_sys_get_robust_list, compat_sys_migrate_pages, compat_sys_mbind, compat_sys_get_mempolicy
 	.word compat_sys_set_mempolicy, compat_sys_kexec_load, compat_sys_move_pages, sys_getcpu, compat_sys_epoll_pwait
 /*310*/	.word compat_sys_utimensat, compat_sys_signalfd, sys_timerfd_create, sys_eventfd, compat_sys_fallocate
-	.word compat_sys_timerfd_settime, compat_sys_timerfd_gettime
+	.word compat_sys_timerfd_settime, compat_sys_timerfd_gettime, compat_sys_signalfd4, sys_eventfd2, sys_epoll_create1
+/*320*/	.word sys_dup3, sys_pipe2, sys_inotify_init1
 
 #endif /* CONFIG_COMPAT */
 
@@ -154,4 +155,5 @@ sys_call_table:
 /*300*/	.word sys_set_robust_list, sys_get_robust_list, sys_migrate_pages, sys_mbind, sys_get_mempolicy
 	.word sys_set_mempolicy, sys_kexec_load, sys_move_pages, sys_getcpu, sys_epoll_pwait
 /*310*/	.word sys_utimensat, sys_signalfd, sys_timerfd_create, sys_eventfd, sys_fallocate
-	.word sys_timerfd_settime, sys_timerfd_gettime
+	.word sys_timerfd_settime, sys_timerfd_gettime, sys_signalfd4, sys_eventfd2, sys_epoll_create1
+/*320*/	.word sys_dup3, sys_pipe2, sys_inotify_init1
diff --git a/arch/sparc64/kernel/time.c b/arch/sparc64/kernel/time.c
index a0c6a97eec6e..cc16fdcf98af 100644
--- a/arch/sparc64/kernel/time.c
+++ b/arch/sparc64/kernel/time.c
@@ -33,6 +33,7 @@
 #include <linux/kernel_stat.h>
 #include <linux/clockchips.h>
 #include <linux/clocksource.h>
+#include <linux/of_device.h>
 
 #include <asm/oplib.h>
 #include <asm/mostek.h>
@@ -40,7 +41,6 @@
 #include <asm/irq.h>
 #include <asm/io.h>
 #include <asm/prom.h>
-#include <asm/of_device.h>
 #include <asm/starfire.h>
 #include <asm/smp.h>
 #include <asm/sections.h>
diff --git a/arch/sparc64/kernel/traps.c b/arch/sparc64/kernel/traps.c
index bd30ecba5630..3d924121c796 100644
--- a/arch/sparc64/kernel/traps.c
+++ b/arch/sparc64/kernel/traps.c
@@ -39,6 +39,7 @@
 #include <asm/prom.h>
 
 #include "entry.h"
+#include "kstack.h"
 
 /* When an irrecoverable trap occurs at tl > 0, the trap entry
  * code logs the trap state registers at every level in the trap
@@ -1777,7 +1778,7 @@ static void sun4v_log_error(struct pt_regs *regs, struct sun4v_error_entry *ent,
 	       pfx,
 	       ent->err_raddr, ent->err_size, ent->err_cpu);
 
-	__show_regs(regs);
+	show_regs(regs);
 
 	if ((cnt = atomic_read(ocnt)) != 0) {
 		atomic_set(ocnt, 0);
@@ -2115,14 +2116,12 @@ void show_stack(struct task_struct *tsk, unsigned long *_ksp)
 		struct pt_regs *regs;
 		unsigned long pc;
 
-		/* Bogus frame pointer? */
-		if (fp < (thread_base + sizeof(struct thread_info)) ||
-		    fp >= (thread_base + THREAD_SIZE))
+		if (!kstack_valid(tp, fp))
 			break;
 		sf = (struct sparc_stackf *) fp;
 		regs = (struct pt_regs *) (sf + 1);
 
-		if ((regs->magic & ~0x1ff) == PT_REGS_MAGIC) {
+		if (kstack_is_trap_frame(tp, regs)) {
 			if (!(regs->tstate & TSTATE_PRIV))
 				break;
 			pc = regs->tpc;
@@ -2177,7 +2176,6 @@ static inline struct reg_window *kernel_stack_up(struct reg_window *rw)
 void die_if_kernel(char *str, struct pt_regs *regs)
 {
 	static int die_counter;
-	extern void smp_report_regs(void);
 	int count = 0;
 	
 	/* Amuse the user. */
@@ -2190,7 +2188,7 @@ void die_if_kernel(char *str, struct pt_regs *regs)
 	printk("%s(%d): %s [#%d]\n", current->comm, task_pid_nr(current), str, ++die_counter);
 	notify_die(DIE_OOPS, str, regs, 0, 255, SIGSEGV);
 	__asm__ __volatile__("flushw");
-	__show_regs(regs);
+	show_regs(regs);
 	add_taint(TAINT_DIE);
 	if (regs->tstate & TSTATE_PRIV) {
 		struct reg_window *rw = (struct reg_window *)
@@ -2215,11 +2213,6 @@ void die_if_kernel(char *str, struct pt_regs *regs)
 		}
 		user_instruction_dump ((unsigned int __user *) regs->tpc);
 	}
-#if 0
-#ifdef CONFIG_SMP
-	smp_report_regs();
-#endif
-#endif                                                	
 	if (regs->tstate & TSTATE_PRIV)
 		do_exit(SIGKILL);
 	do_exit(SIGSEGV);
diff --git a/arch/sparc64/lib/mcount.S b/arch/sparc64/lib/mcount.S
index 7735a7a60533..fad90ddb3a28 100644
--- a/arch/sparc64/lib/mcount.S
+++ b/arch/sparc64/lib/mcount.S
@@ -48,12 +48,45 @@ mcount:
 	sub		%g3, STACK_BIAS, %g3
 	cmp		%sp, %g3
 	bg,pt		%xcc, 1f
-	 sethi		%hi(panicstring), %g3
+	 nop
+	lduh		[%g6 + TI_CPU], %g1
+	sethi		%hi(hardirq_stack), %g3
+	or		%g3, %lo(hardirq_stack), %g3
+	sllx		%g1, 3, %g1
+	ldx		[%g3 + %g1], %g7
+	sub		%g7, STACK_BIAS, %g7
+	cmp		%sp, %g7
+	bleu,pt		%xcc, 2f
+	 sethi		%hi(THREAD_SIZE), %g3
+	add		%g7, %g3, %g7
+	cmp		%sp, %g7
+	blu,pn		%xcc, 1f
+2:	 sethi		%hi(softirq_stack), %g3
+	or		%g3, %lo(softirq_stack), %g3
+	ldx		[%g3 + %g1], %g7
+	cmp		%sp, %g7
+	bleu,pt		%xcc, 2f
+	 sethi		%hi(THREAD_SIZE), %g3
+	add		%g7, %g3, %g7
+	cmp		%sp, %g7
+	blu,pn		%xcc, 1f
+	 nop
+	/* If we are already on ovstack, don't hop onto it
+	 * again, we are already trying to output the stack overflow
+	 * message.
+	 */
 	sethi		%hi(ovstack), %g7		! cant move to panic stack fast enough
 	 or		%g7, %lo(ovstack), %g7
-	add		%g7, OVSTACKSIZE, %g7
+	add		%g7, OVSTACKSIZE, %g3
+	sub		%g3, STACK_BIAS + 192, %g3
 	sub		%g7, STACK_BIAS, %g7
-	mov		%g7, %sp
+	cmp		%sp, %g7
+	blu,pn		%xcc, 2f
+	 cmp		%sp, %g3
+	bleu,pn		%xcc, 1f
+	 nop
+2:	mov		%g3, %sp
+	sethi		%hi(panicstring), %g3
 	call		prom_printf
 	 or		%g3, %lo(panicstring), %o0
 	call		prom_halt
diff --git a/arch/sparc64/mm/init.c b/arch/sparc64/mm/init.c
index 713297473951..a41df7bef035 100644
--- a/arch/sparc64/mm/init.c
+++ b/arch/sparc64/mm/init.c
@@ -49,6 +49,7 @@
 #include <asm/sstate.h>
 #include <asm/mdesc.h>
 #include <asm/cpudata.h>
+#include <asm/irq.h>
 
 #define MAX_PHYS_ADDRESS	(1UL << 42UL)
 #define KPTE_BITMAP_CHUNK_SZ	(256UL * 1024UL * 1024UL)
@@ -392,51 +393,6 @@ void __kprobes flush_icache_range(unsigned long start, unsigned long end)
 	}
 }
 
-void show_mem(void)
-{
-	unsigned long total = 0, reserved = 0;
-	unsigned long shared = 0, cached = 0;
-	pg_data_t *pgdat;
-
-	printk(KERN_INFO "Mem-info:\n");
-	show_free_areas();
-	printk(KERN_INFO "Free swap:       %6ldkB\n",
-	       nr_swap_pages << (PAGE_SHIFT-10));
-	for_each_online_pgdat(pgdat) {
-		unsigned long i, flags;
-
-		pgdat_resize_lock(pgdat, &flags);
-		for (i = 0; i < pgdat->node_spanned_pages; i++) {
-			struct page *page = pgdat_page_nr(pgdat, i);
-			total++;
-			if (PageReserved(page))
-				reserved++;
-			else if (PageSwapCache(page))
-				cached++;
-			else if (page_count(page))
-				shared += page_count(page) - 1;
-		}
-		pgdat_resize_unlock(pgdat, &flags);
-	}
-
-	printk(KERN_INFO "%lu pages of RAM\n", total);
-	printk(KERN_INFO "%lu reserved pages\n", reserved);
-	printk(KERN_INFO "%lu pages shared\n", shared);
-	printk(KERN_INFO "%lu pages swap cached\n", cached);
-
-	printk(KERN_INFO "%lu pages dirty\n",
-	       global_page_state(NR_FILE_DIRTY));
-	printk(KERN_INFO "%lu pages writeback\n",
-	       global_page_state(NR_WRITEBACK));
-	printk(KERN_INFO "%lu pages mapped\n",
-	       global_page_state(NR_FILE_MAPPED));
-	printk(KERN_INFO "%lu pages slab\n",
-		global_page_state(NR_SLAB_RECLAIMABLE) +
-		global_page_state(NR_SLAB_UNRECLAIMABLE));
-	printk(KERN_INFO "%lu pages pagetables\n",
-	       global_page_state(NR_PAGETABLE));
-}
-
 void mmu_info(struct seq_file *m)
 {
 	if (tlb_type == cheetah)
@@ -840,6 +796,9 @@ static unsigned long nid_range(unsigned long start, unsigned long end,
 		start += PAGE_SIZE;
 	}
 
+	if (start > end)
+		start = end;
+
 	return start;
 }
 #else
@@ -1767,8 +1726,7 @@ void __init paging_init(void)
 
 	find_ramdisk(phys_base);
 
-	if (cmdline_memory_size)
-		lmb_enforce_memory_limit(phys_base + cmdline_memory_size);
+	lmb_enforce_memory_limit(cmdline_memory_size);
 
 	lmb_analyze();
 	lmb_dump_all();
@@ -1816,6 +1774,16 @@ void __init paging_init(void)
 	if (tlb_type == hypervisor)
 		sun4v_mdesc_init();
 
+	/* Once the OF device tree and MDESC have been setup, we know
+	 * the list of possible cpus.  Therefore we can allocate the
+	 * IRQ stacks.
+	 */
+	for_each_possible_cpu(i) {
+		/* XXX Use node local allocations... XXX */
+		softirq_stack[i] = __va(lmb_alloc(THREAD_SIZE, THREAD_SIZE));
+		hardirq_stack[i] = __va(lmb_alloc(THREAD_SIZE, THREAD_SIZE));
+	}
+
 	/* Setup bootmem... */
 	last_valid_pfn = end_pfn = bootmem_init(phys_base);
 
@@ -1875,7 +1843,7 @@ static int pavail_rescan_ents __initdata;
  * memory list again, and make sure it provides at least as much
  * memory as 'pavail' does.
  */
-static void setup_valid_addr_bitmap_from_pavail(void)
+static void __init setup_valid_addr_bitmap_from_pavail(void)
 {
 	int i;
 
@@ -1995,6 +1963,15 @@ void __init mem_init(void)
 void free_initmem(void)
 {
 	unsigned long addr, initend;
+	int do_free = 1;
+
+	/* If the physical memory maps were trimmed by kernel command
+	 * line options, don't even try freeing this initmem stuff up.
+	 * The kernel image could have been in the trimmed out region
+	 * and if so the freeing below will free invalid page structs.
+	 */
+	if (cmdline_memory_size)
+		do_free = 0;
 
 	/*
 	 * The init section is aligned to 8k in vmlinux.lds. Page align for >8k pagesizes.
@@ -2009,13 +1986,16 @@ void free_initmem(void)
 			((unsigned long) __va(kern_base)) -
 			((unsigned long) KERNBASE));
 		memset((void *)addr, POISON_FREE_INITMEM, PAGE_SIZE);
-		p = virt_to_page(page);
 
-		ClearPageReserved(p);
-		init_page_count(p);
-		__free_page(p);
-		num_physpages++;
-		totalram_pages++;
+		if (do_free) {
+			p = virt_to_page(page);
+
+			ClearPageReserved(p);
+			init_page_count(p);
+			__free_page(p);
+			num_physpages++;
+			totalram_pages++;
+		}
 	}
 }
 
diff --git a/arch/sparc64/mm/tsb.c b/arch/sparc64/mm/tsb.c
index 3547937b17a2..587f8efb2e05 100644
--- a/arch/sparc64/mm/tsb.c
+++ b/arch/sparc64/mm/tsb.c
@@ -1,9 +1,10 @@
 /* arch/sparc64/mm/tsb.c
  *
- * Copyright (C) 2006 David S. Miller <davem@davemloft.net>
+ * Copyright (C) 2006, 2008 David S. Miller <davem@davemloft.net>
  */
 
 #include <linux/kernel.h>
+#include <linux/preempt.h>
 #include <asm/system.h>
 #include <asm/page.h>
 #include <asm/tlbflush.h>
@@ -415,7 +416,9 @@ retry_tsb_alloc:
 		tsb_context_switch(mm);
 
 		/* Now force other processors to do the same.  */
+		preempt_disable();
 		smp_tsb_sync(mm);
+		preempt_enable();
 
 		/* Now it is safe to free the old tsb.  */
 		kmem_cache_free(tsb_caches[old_cache_index], old_tsb);
diff --git a/arch/sparc64/mm/ultra.S b/arch/sparc64/mm/ultra.S
index 4c8ca131ffaf..86773e89dc1b 100644
--- a/arch/sparc64/mm/ultra.S
+++ b/arch/sparc64/mm/ultra.S
@@ -480,42 +480,6 @@ xcall_sync_tick:
 	b		rtrap_xcall
 	 ldx		[%sp + PTREGS_OFF + PT_V9_TSTATE], %l1
 
-	/* NOTE: This is SPECIAL!!  We do etrap/rtrap however
-	 *       we choose to deal with the "BH's run with
-	 *       %pil==15" problem (described in asm/pil.h)
-	 *       by just invoking rtrap directly past where
-	 *       BH's are checked for.
-	 *
-	 *       We do it like this because we do not want %pil==15
-	 *       lockups to prevent regs being reported.
-	 */
-	.globl		xcall_report_regs
-xcall_report_regs:
-
-661:	rdpr		%pstate, %g2
-	wrpr		%g2, PSTATE_IG | PSTATE_AG, %pstate
-	.section	.sun4v_2insn_patch, "ax"
-	.word		661b
-	nop
-	nop
-	.previous
-
-	rdpr		%pil, %g2
-	wrpr		%g0, 15, %pil
-	sethi		%hi(109f), %g7
-	b,pt		%xcc, etrap_irq
-109:	 or		%g7, %lo(109b), %g7
-#ifdef CONFIG_TRACE_IRQFLAGS
-	call		trace_hardirqs_off
-	 nop
-#endif
-	call		__show_regs
-	 add		%sp, PTREGS_OFF, %o0
-	/* Has to be a non-v9 branch due to the large distance. */
-	b		rtrap_xcall
-	 ldx		[%sp + PTREGS_OFF + PT_V9_TSTATE], %l1
-
-#ifdef CONFIG_MAGIC_SYSRQ
 	.globl		xcall_fetch_glob_regs
 xcall_fetch_glob_regs:
 	sethi		%hi(global_reg_snapshot), %g1
@@ -531,6 +495,13 @@ xcall_fetch_glob_regs:
 	stx		%g7, [%g1 + GR_SNAP_TNPC]
 	stx		%o7, [%g1 + GR_SNAP_O7]
 	stx		%i7, [%g1 + GR_SNAP_I7]
+	/* Don't try this at home kids... */
+	rdpr		%cwp, %g2
+	sub		%g2, 1, %g7
+	wrpr		%g7, %cwp
+	mov		%i7, %g7
+	wrpr		%g2, %cwp
+	stx		%g7, [%g1 + GR_SNAP_RPC]
 	sethi		%hi(trap_block), %g7
 	or		%g7, %lo(trap_block), %g7
 	sllx		%g2, TRAP_BLOCK_SZ_SHIFT, %g2
@@ -539,7 +510,6 @@ xcall_fetch_glob_regs:
 	membar		#StoreStore
 	stx		%g3, [%g1 + GR_SNAP_THREAD]
 	retry
-#endif /* CONFIG_MAGIC_SYSRQ */
 
 #ifdef DCACHE_ALIASING_POSSIBLE
 	.align		32
diff --git a/arch/um/drivers/line.c b/arch/um/drivers/line.c
index 5047490fc299..d741f35d7b3a 100644
--- a/arch/um/drivers/line.c
+++ b/arch/um/drivers/line.c
@@ -362,19 +362,7 @@ static irqreturn_t line_write_interrupt(int irq, void *data)
 	if (tty == NULL)
 		return IRQ_NONE;
 
-	if (test_bit(TTY_DO_WRITE_WAKEUP, &tty->flags) &&
-	   (tty->ldisc.write_wakeup != NULL))
-		(tty->ldisc.write_wakeup)(tty);
-
-	/*
-	 * BLOCKING mode
-	 * In blocking mode, everything sleeps on tty->write_wait.
-	 * Sleeping in the console driver would break non-blocking
-	 * writes.
-	 */
-
-	if (waitqueue_active(&tty->write_wait))
-		wake_up_interruptible(&tty->write_wait);
+	tty_wakeup(tty);
 	return IRQ_HANDLED;
 }
 
diff --git a/arch/um/kernel/mem.c b/arch/um/kernel/mem.c
index e2274ef3155d..61d7e6138ff5 100644
--- a/arch/um/kernel/mem.c
+++ b/arch/um/kernel/mem.c
@@ -264,37 +264,6 @@ void free_initrd_mem(unsigned long start, unsigned long end)
 }
 #endif
 
-void show_mem(void)
-{
-	int pfn, total = 0, reserved = 0;
-	int shared = 0, cached = 0;
-	int high_mem = 0;
-	struct page *page;
-
-	printk(KERN_INFO "Mem-info:\n");
-	show_free_areas();
-	printk(KERN_INFO "Free swap:       %6ldkB\n",
-	       nr_swap_pages<<(PAGE_SHIFT-10));
-	pfn = max_mapnr;
-	while (pfn-- > 0) {
-		page = pfn_to_page(pfn);
-		total++;
-		if (PageHighMem(page))
-			high_mem++;
-		if (PageReserved(page))
-			reserved++;
-		else if (PageSwapCache(page))
-			cached++;
-		else if (page_count(page))
-			shared += page_count(page) - 1;
-	}
-	printk(KERN_INFO "%d pages of RAM\n", total);
-	printk(KERN_INFO "%d pages of HIGHMEM\n", high_mem);
-	printk(KERN_INFO "%d reserved pages\n", reserved);
-	printk(KERN_INFO "%d pages shared\n", shared);
-	printk(KERN_INFO "%d pages swap cached\n", cached);
-}
-
 /* Allocate and free page tables. */
 
 pgd_t *pgd_alloc(struct mm_struct *mm)
diff --git a/arch/um/sys-x86_64/syscall_table.c b/arch/um/sys-x86_64/syscall_table.c
index c128eb897008..32f5fbe2d0d2 100644
--- a/arch/um/sys-x86_64/syscall_table.c
+++ b/arch/um/sys-x86_64/syscall_table.c
@@ -41,12 +41,12 @@
 #define stub_rt_sigreturn sys_rt_sigreturn
 
 #define __SYSCALL(nr, sym) extern asmlinkage void sym(void) ;
-#undef _ASM_X86_64_UNISTD_H_
+#undef ASM_X86__UNISTD_64_H
 #include <asm-x86/unistd_64.h>
 
 #undef __SYSCALL
 #define __SYSCALL(nr, sym) [ nr ] = sym,
-#undef _ASM_X86_64_UNISTD_H_
+#undef ASM_X86__UNISTD_64_H
 
 typedef void (*sys_call_ptr_t)(void);
 
diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index b2ddfcf01728..21ef9dd36187 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -23,11 +23,14 @@ config X86
 	select HAVE_OPROFILE
 	select HAVE_IOREMAP_PROT
 	select HAVE_KPROBES
+	select ARCH_WANT_OPTIONAL_GPIOLIB
 	select HAVE_KRETPROBES
 	select HAVE_DYNAMIC_FTRACE
 	select HAVE_FTRACE
 	select HAVE_KVM if ((X86_32 && !X86_VOYAGER && !X86_VISWS && !X86_NUMAQ) || X86_64)
 	select HAVE_ARCH_KGDB if !X86_VOYAGER
+	select HAVE_GENERIC_DMA_COHERENT if X86_32
+	select HAVE_EFFICIENT_UNALIGNED_ACCESS
 
 config ARCH_DEFCONFIG
 	string
@@ -330,20 +333,6 @@ config X86_BIGSMP
 
 endif
 
-config X86_RDC321X
-	bool "RDC R-321x SoC"
-	depends on X86_32
-	select M486
-	select X86_REBOOTFIXUPS
-	select GENERIC_GPIO
-	select LEDS_CLASS
-	select LEDS_GPIO
-	select NEW_LEDS
-	help
-	  This option is needed for RDC R-321x system-on-chip, also known
-	  as R-8610-(G).
-	  If you don't have one of these chips, you should say N here.
-
 config X86_VSMP
 	bool "Support for ScaleMP vSMP"
 	select PARAVIRT
@@ -367,6 +356,16 @@ config X86_VISWS
 	  A kernel compiled for the Visual Workstation will run on general
 	  PCs as well. See <file:Documentation/sgi-visws.txt> for details.
 
+config X86_RDC321X
+	bool "RDC R-321x SoC"
+	depends on X86_32
+	select M486
+	select X86_REBOOTFIXUPS
+	help
+	  This option is needed for RDC R-321x system-on-chip, also known
+	  as R-8610-(G).
+	  If you don't have one of these chips, you should say N here.
+
 config SCHED_NO_NO_OMIT_FRAME_POINTER
 	def_bool y
 	prompt "Single-depth WCHAN output"
@@ -578,35 +577,29 @@ config SWIOTLB
 
 config IOMMU_HELPER
 	def_bool (CALGARY_IOMMU || GART_IOMMU || SWIOTLB || AMD_IOMMU)
+
 config MAXSMP
 	bool "Configure Maximum number of SMP Processors and NUMA Nodes"
-	depends on X86_64 && SMP
+	depends on X86_64 && SMP && BROKEN
 	default n
 	help
 	  Configure maximum number of CPUS and NUMA Nodes for this architecture.
 	  If unsure, say N.
 
-if MAXSMP
 config NR_CPUS
-	int
-	default "4096"
-endif
-
-if !MAXSMP
-config NR_CPUS
-	int "Maximum number of CPUs (2-4096)"
-	range 2 4096
+	int "Maximum number of CPUs (2-512)" if !MAXSMP
+	range 2 512
 	depends on SMP
+	default "4096" if MAXSMP
 	default "32" if X86_NUMAQ || X86_SUMMIT || X86_BIGSMP || X86_ES7000
 	default "8"
 	help
 	  This allows you to specify the maximum number of CPUs which this
-	  kernel will support.  The maximum supported value is 4096 and the
+	  kernel will support.  The maximum supported value is 512 and the
 	  minimum value which makes sense is 2.
 
 	  This is purely to save memory - each supported CPU adds
 	  approximately eight kilobytes to the kernel image.
-endif
 
 config SCHED_SMT
 	bool "SMT (Hyperthreading) scheduler support"
@@ -952,9 +945,9 @@ config NUMA
 	  local memory controller of the CPU and add some more
 	  NUMA awareness to the kernel.
 
-	  For i386 this is currently highly experimental and should be only
+	  For 32-bit this is currently highly experimental and should be only
 	  used for kernel development. It might also cause boot failures.
-	  For x86_64 this is recommended on all multiprocessor Opteron systems.
+	  For 64-bit this is recommended on all multiprocessor Opteron systems.
 	  If the system is EM64T, you should say N unless your system is
 	  EM64T NUMA.
 
@@ -997,17 +990,10 @@ config NUMA_EMU
 	  into virtual nodes when booted with "numa=fake=N", where N is the
 	  number of nodes. This is only useful for debugging.
 
-if MAXSMP
-
 config NODES_SHIFT
-	int
-	default "9"
-endif
-
-if !MAXSMP
-config NODES_SHIFT
-	int "Maximum NUMA Nodes (as a power of 2)"
+	int "Maximum NUMA Nodes (as a power of 2)" if !MAXSMP
 	range 1 9   if X86_64
+	default "9" if MAXSMP
 	default "6" if X86_64
 	default "4" if X86_NUMAQ
 	default "3"
@@ -1015,7 +1001,6 @@ config NODES_SHIFT
 	help
 	  Specify the maximum number of NUMA Nodes available on the target
 	  system.  Increases memory reserved to accomodate various tables.
-endif
 
 config HAVE_ARCH_BOOTMEM_NODE
 	def_bool y
@@ -1264,7 +1249,7 @@ config KEXEC
 	  strongly in flux, so no good recommendation can be made.
 
 config CRASH_DUMP
-	bool "kernel crash dumps (EXPERIMENTAL)"
+	bool "kernel crash dumps"
 	depends on X86_64 || (X86_32 && HIGHMEM)
 	help
 	  Generate crash dump after being started by kexec.
@@ -1277,6 +1262,14 @@ config CRASH_DUMP
 	  (CONFIG_RELOCATABLE=y).
 	  For more details see Documentation/kdump/kdump.txt
 
+config KEXEC_JUMP
+	bool "kexec jump (EXPERIMENTAL)"
+	depends on EXPERIMENTAL
+	depends on KEXEC && HIBERNATION && X86_32
+	help
+	  Jump between original kernel and kexeced kernel and invoke
+	  code in physical address mode via KEXEC
+
 config PHYSICAL_START
 	hex "Physical address where the kernel is loaded" if (EMBEDDED || CRASH_DUMP)
 	default "0x1000000" if X86_NUMAQ
@@ -1650,6 +1643,14 @@ config DMAR_FLOPPY_WA
 	 workaround will setup a 1:1 mapping for the first
 	 16M to make floppy (an ISA device) work.
 
+config INTR_REMAP
+	bool "Support for Interrupt Remapping (EXPERIMENTAL)"
+	depends on X86_64 && X86_IO_APIC && PCI_MSI && ACPI && EXPERIMENTAL
+	help
+	 Supports Interrupt remapping for IO-APIC and MSI devices.
+	 To use x2apic mode in the CPU's which support x2APIC enhancements or
+	 to support platforms with CPU's having > 8 bit APIC ID, say Y.
+
 source "drivers/pci/pcie/Kconfig"
 
 source "drivers/pci/Kconfig"
diff --git a/arch/x86/Kconfig.cpu b/arch/x86/Kconfig.cpu
index 468ffc2df0e0..1b29d6a87563 100644
--- a/arch/x86/Kconfig.cpu
+++ b/arch/x86/Kconfig.cpu
@@ -416,6 +416,68 @@ config X86_DEBUGCTLMSR
 	def_bool y
 	depends on !(MK6 || MWINCHIPC6 || MWINCHIP2 || MWINCHIP3D || MCYRIXIII || M586MMX || M586TSC || M586 || M486 || M386)
 
+menuconfig PROCESSOR_SELECT
+	default y
+	bool "Supported processor vendors" if EMBEDDED
+	help
+	  This lets you choose what x86 vendor support code your kernel
+	  will include.
+
+config CPU_SUP_INTEL_32
+	default y
+	bool "Support Intel processors" if PROCESSOR_SELECT
+	depends on !64BIT
+	help
+	  This enables extended support for Intel processors
+
+config CPU_SUP_INTEL_64
+	default y
+	bool "Support Intel processors" if PROCESSOR_SELECT
+	depends on 64BIT
+	help
+	  This enables extended support for Intel processors
+
+config CPU_SUP_CYRIX_32
+	default y
+	bool "Support Cyrix processors" if PROCESSOR_SELECT
+	depends on !64BIT
+	help
+	  This enables extended support for Cyrix processors
+
+config CPU_SUP_AMD
+	default y
+	bool "Support AMD processors" if PROCESSOR_SELECT
+	help
+	  This enables extended support for AMD processors
+
+config CPU_SUP_CENTAUR_32
+	default y
+	bool "Support Centaur processors" if PROCESSOR_SELECT
+	depends on !64BIT
+	help
+	  This enables extended support for Centaur processors
+
+config CPU_SUP_CENTAUR_64
+	default y
+	bool "Support Centaur processors" if PROCESSOR_SELECT
+	depends on 64BIT
+	help
+	  This enables extended support for Centaur processors
+
+config CPU_SUP_TRANSMETA_32
+	default y
+	bool "Support Transmeta processors" if PROCESSOR_SELECT
+	depends on !64BIT
+	help
+	  This enables extended support for Transmeta processors
+
+config CPU_SUP_UMC_32
+	default y
+	bool "Support UMC processors" if PROCESSOR_SELECT
+	depends on !64BIT
+	help
+	  This enables extended support for UMC processors
+
 config X86_DS
 	bool "Debug Store support"
 	default y
diff --git a/arch/x86/Makefile b/arch/x86/Makefile
index 919ce21ea654..f5631da585b6 100644
--- a/arch/x86/Makefile
+++ b/arch/x86/Makefile
@@ -118,11 +118,6 @@ mflags-$(CONFIG_X86_GENERICARCH):= -Iinclude/asm-x86/mach-generic
 fcore-$(CONFIG_X86_GENERICARCH)	+= arch/x86/mach-generic/
 mcore-$(CONFIG_X86_GENERICARCH)	:= arch/x86/mach-default/
 
-# RDC R-321x subarch support
-mflags-$(CONFIG_X86_RDC321X)	:= -Iinclude/asm-x86/mach-rdc321x
-mcore-$(CONFIG_X86_RDC321X)	:= arch/x86/mach-default/
-core-$(CONFIG_X86_RDC321X)	+= arch/x86/mach-rdc321x/
-
 # default subarch .h files
 mflags-y += -Iinclude/asm-x86/mach-default
 
diff --git a/arch/x86/boot/boot.h b/arch/x86/boot/boot.h
index a34b9982c7cb..cc0ef13fba7a 100644
--- a/arch/x86/boot/boot.h
+++ b/arch/x86/boot/boot.h
@@ -24,10 +24,14 @@
 #include <linux/edd.h>
 #include <asm/boot.h>
 #include <asm/setup.h>
+#include "bitops.h"
+#include <asm/cpufeature.h>
 
 /* Useful macros */
 #define BUILD_BUG_ON(condition) ((void)sizeof(char[1 - 2*!!(condition)]))
 
+#define ARRAY_SIZE(x) (sizeof(x) / sizeof(*(x)))
+
 extern struct setup_header hdr;
 extern struct boot_params boot_params;
 
@@ -242,6 +246,12 @@ int cmdline_find_option(const char *option, char *buffer, int bufsize);
 int cmdline_find_option_bool(const char *option);
 
 /* cpu.c, cpucheck.c */
+struct cpu_features {
+	int level;		/* Family, or 64 for x86-64 */
+	int model;
+	u32 flags[NCAPINTS];
+};
+extern struct cpu_features cpu;
 int check_cpu(int *cpu_level_ptr, int *req_level_ptr, u32 **err_flags_ptr);
 int validate_cpu(void);
 
diff --git a/arch/x86/boot/compressed/misc.c b/arch/x86/boot/compressed/misc.c
index bc5553b496f7..aaf5a2131efc 100644
--- a/arch/x86/boot/compressed/misc.c
+++ b/arch/x86/boot/compressed/misc.c
@@ -16,7 +16,7 @@
  */
 #undef CONFIG_PARAVIRT
 #ifdef CONFIG_X86_32
-#define _ASM_DESC_H_ 1
+#define ASM_X86__DESC_H 1
 #endif
 
 #ifdef CONFIG_X86_64
@@ -182,8 +182,6 @@ static unsigned		outcnt;
 static int  fill_inbuf(void);
 static void flush_window(void);
 static void error(char *m);
-static void gzip_mark(void **);
-static void gzip_release(void **);
 
 /*
  * This is set up by the setup-routine at boot-time
@@ -196,9 +194,6 @@ extern int input_len;
 
 static long bytes_out;
 
-static void *malloc(int size);
-static void free(void *where);
-
 static void *memset(void *s, int c, unsigned n);
 static void *memcpy(void *dest, const void *src, unsigned n);
 
@@ -220,40 +215,6 @@ static int lines, cols;
 
 #include "../../../../lib/inflate.c"
 
-static void *malloc(int size)
-{
-	void *p;
-
-	if (size < 0)
-		error("Malloc error");
-	if (free_mem_ptr <= 0)
-		error("Memory error");
-
-	free_mem_ptr = (free_mem_ptr + 3) & ~3;	/* Align */
-
-	p = (void *)free_mem_ptr;
-	free_mem_ptr += size;
-
-	if (free_mem_ptr >= free_mem_end_ptr)
-		error("Out of memory");
-
-	return p;
-}
-
-static void free(void *where)
-{	/* Don't care */
-}
-
-static void gzip_mark(void **ptr)
-{
-	*ptr = (void *) free_mem_ptr;
-}
-
-static void gzip_release(void **ptr)
-{
-	free_mem_ptr = (memptr) *ptr;
-}
-
 static void scroll(void)
 {
 	int i;
diff --git a/arch/x86/boot/cpu.c b/arch/x86/boot/cpu.c
index 92d6fd73dc7d..75298fe2edca 100644
--- a/arch/x86/boot/cpu.c
+++ b/arch/x86/boot/cpu.c
@@ -16,9 +16,6 @@
  */
 
 #include "boot.h"
-#include "bitops.h"
-#include <asm/cpufeature.h>
-
 #include "cpustr.h"
 
 static char *cpu_name(int level)
diff --git a/arch/x86/boot/cpucheck.c b/arch/x86/boot/cpucheck.c
index 7804389ee005..4d3ff037201f 100644
--- a/arch/x86/boot/cpucheck.c
+++ b/arch/x86/boot/cpucheck.c
@@ -22,21 +22,13 @@
 
 #ifdef _SETUP
 # include "boot.h"
-# include "bitops.h"
 #endif
 #include <linux/types.h>
-#include <asm/cpufeature.h>
 #include <asm/processor-flags.h>
 #include <asm/required-features.h>
 #include <asm/msr-index.h>
 
-struct cpu_features {
-	int level;		/* Family, or 64 for x86-64 */
-	int model;
-	u32 flags[NCAPINTS];
-};
-
-static struct cpu_features cpu;
+struct cpu_features cpu;
 static u32 cpu_vendor[3];
 static u32 err_flags[NCAPINTS];
 
@@ -46,12 +38,12 @@ static const u32 req_flags[NCAPINTS] =
 {
 	REQUIRED_MASK0,
 	REQUIRED_MASK1,
-	REQUIRED_MASK2,
-	REQUIRED_MASK3,
+	0, /* REQUIRED_MASK2 not implemented in this file */
+	0, /* REQUIRED_MASK3 not implemented in this file */
 	REQUIRED_MASK4,
-	REQUIRED_MASK5,
+	0, /* REQUIRED_MASK5 not implemented in this file */
 	REQUIRED_MASK6,
-	REQUIRED_MASK7,
+	0, /* REQUIRED_MASK7 not implemented in this file */
 };
 
 #define A32(a, b, c, d) (((d) << 24)+((c) << 16)+((b) << 8)+(a))
diff --git a/arch/x86/boot/main.c b/arch/x86/boot/main.c
index 2296164b54d2..197421db1af1 100644
--- a/arch/x86/boot/main.c
+++ b/arch/x86/boot/main.c
@@ -73,6 +73,11 @@ static void keyboard_set_repeat(void)
  */
 static void query_ist(void)
 {
+	/* Some older BIOSes apparently crash on this call, so filter
+	   it from machines too old to have SpeedStep at all. */
+	if (cpu.level < 6)
+		return;
+
 	asm("int $0x15"
 	    : "=a" (boot_params.ist_info.signature),
 	      "=b" (boot_params.ist_info.command),
diff --git a/arch/x86/boot/memory.c b/arch/x86/boot/memory.c
index 53165c97336b..8c3c25f35578 100644
--- a/arch/x86/boot/memory.c
+++ b/arch/x86/boot/memory.c
@@ -13,7 +13,6 @@
  */
 
 #include "boot.h"
-#include <linux/kernel.h>
 
 #define SMAP	0x534d4150	/* ASCII "SMAP" */
 
diff --git a/arch/x86/boot/mkcpustr.c b/arch/x86/boot/mkcpustr.c
index bbe76953bae9..4589caa3e9d1 100644
--- a/arch/x86/boot/mkcpustr.c
+++ b/arch/x86/boot/mkcpustr.c
@@ -15,7 +15,7 @@
 
 #include <stdio.h>
 
-#include "../kernel/cpu/feature_names.c"
+#include "../kernel/cpu/capflags.c"
 
 #if NCAPFLAGS > 8
 # error "Need to adjust the boot code handling of CPUID strings"
diff --git a/arch/x86/configs/i386_defconfig b/arch/x86/configs/i386_defconfig
index 4d73f53287b6..104275e191a8 100644
--- a/arch/x86/configs/i386_defconfig
+++ b/arch/x86/configs/i386_defconfig
@@ -1,13 +1,13 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc1
-# Sun May  4 19:59:02 2008
+# Linux kernel version: 2.6.27-rc4
+# Mon Aug 25 15:04:00 2008
 #
 # CONFIG_64BIT is not set
 CONFIG_X86_32=y
 # CONFIG_X86_64 is not set
 CONFIG_X86=y
-CONFIG_DEFCONFIG_LIST="arch/x86/configs/i386_defconfig"
+CONFIG_ARCH_DEFCONFIG="arch/x86/configs/i386_defconfig"
 # CONFIG_GENERIC_LOCKBREAK is not set
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CMOS_UPDATE=y
@@ -53,6 +53,7 @@ CONFIG_X86_HT=y
 CONFIG_X86_BIOS_REBOOT=y
 CONFIG_X86_TRAMPOLINE=y
 CONFIG_KTIME_SCALAR=y
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
 # General setup
@@ -82,6 +83,7 @@ CONFIG_CGROUPS=y
 CONFIG_CGROUP_NS=y
 # CONFIG_CGROUP_DEVICE is not set
 CONFIG_CPUSETS=y
+CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y
 CONFIG_GROUP_SCHED=y
 CONFIG_FAIR_GROUP_SCHED=y
 # CONFIG_RT_GROUP_SCHED is not set
@@ -105,7 +107,6 @@ CONFIG_SYSCTL=y
 # CONFIG_EMBEDDED is not set
 CONFIG_UID16=y
 CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
 CONFIG_KALLSYMS_EXTRA_PASS=y
@@ -113,6 +114,7 @@ CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
+CONFIG_PCSPKR_PLATFORM=y
 # CONFIG_COMPAT_BRK is not set
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
@@ -132,27 +134,35 @@ CONFIG_MARKERS=y
 # CONFIG_OPROFILE is not set
 CONFIG_HAVE_OPROFILE=y
 CONFIG_KPROBES=y
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
 CONFIG_KRETPROBES=y
+CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
+# CONFIG_HAVE_ARCH_TRACEHOOK is not set
 # CONFIG_HAVE_DMA_ATTRS is not set
+CONFIG_USE_GENERIC_SMP_HELPERS=y
+# CONFIG_HAVE_CLK is not set
 CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
 CONFIG_MODULE_FORCE_UNLOAD=y
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-# CONFIG_KMOD is not set
+CONFIG_KMOD=y
 CONFIG_STOP_MACHINE=y
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 CONFIG_BLK_DEV_IO_TRACE=y
 # CONFIG_LSF is not set
 CONFIG_BLK_DEV_BSG=y
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -176,19 +186,17 @@ CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
 CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
 CONFIG_SMP=y
+CONFIG_X86_FIND_SMP_CONFIG=y
+CONFIG_X86_MPPARSE=y
 CONFIG_X86_PC=y
 # CONFIG_X86_ELAN is not set
 # CONFIG_X86_VOYAGER is not set
-# CONFIG_X86_NUMAQ is not set
-# CONFIG_X86_SUMMIT is not set
-# CONFIG_X86_BIGSMP is not set
-# CONFIG_X86_VISWS is not set
 # CONFIG_X86_GENERICARCH is not set
-# CONFIG_X86_ES7000 is not set
-# CONFIG_X86_RDC321X is not set
 # CONFIG_X86_VSMP is not set
+# CONFIG_X86_RDC321X is not set
 CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
 # CONFIG_PARAVIRT_GUEST is not set
+# CONFIG_MEMTEST is not set
 # CONFIG_M386 is not set
 # CONFIG_M486 is not set
 # CONFIG_M586 is not set
@@ -215,21 +223,19 @@ CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
 # CONFIG_MPSC is not set
 CONFIG_MCORE2=y
 # CONFIG_GENERIC_CPU is not set
-# CONFIG_X86_GENERIC is not set
+CONFIG_X86_GENERIC=y
 CONFIG_X86_CPU=y
 CONFIG_X86_CMPXCHG=y
-CONFIG_X86_L1_CACHE_SHIFT=6
+CONFIG_X86_L1_CACHE_SHIFT=7
 CONFIG_X86_XADD=y
 CONFIG_X86_WP_WORKS_OK=y
 CONFIG_X86_INVLPG=y
 CONFIG_X86_BSWAP=y
 CONFIG_X86_POPAD_OK=y
-CONFIG_X86_GOOD_APIC=y
 CONFIG_X86_INTEL_USERCOPY=y
 CONFIG_X86_USE_PPRO_CHECKSUM=y
-CONFIG_X86_P6_NOP=y
 CONFIG_X86_TSC=y
-CONFIG_X86_MINIMUM_CPU_FAMILY=6
+CONFIG_X86_MINIMUM_CPU_FAMILY=4
 CONFIG_X86_DEBUGCTLMSR=y
 CONFIG_HPET_TIMER=y
 CONFIG_HPET_EMULATE_RTC=y
@@ -247,7 +253,7 @@ CONFIG_X86_IO_APIC=y
 CONFIG_VM86=y
 # CONFIG_TOSHIBA is not set
 # CONFIG_I8K is not set
-# CONFIG_X86_REBOOTFIXUPS is not set
+CONFIG_X86_REBOOTFIXUPS=y
 # CONFIG_MICROCODE is not set
 CONFIG_X86_MSR=y
 CONFIG_X86_CPUID=y
@@ -256,32 +262,28 @@ CONFIG_HIGHMEM4G=y
 # CONFIG_HIGHMEM64G is not set
 CONFIG_PAGE_OFFSET=0xC0000000
 CONFIG_HIGHMEM=y
-CONFIG_NEED_NODE_MEMMAP_SIZE=y
 CONFIG_ARCH_FLATMEM_ENABLE=y
 CONFIG_ARCH_SPARSEMEM_ENABLE=y
 CONFIG_ARCH_SELECT_MEMORY_MODEL=y
 CONFIG_SELECT_MEMORY_MODEL=y
-# CONFIG_FLATMEM_MANUAL is not set
+CONFIG_FLATMEM_MANUAL=y
 # CONFIG_DISCONTIGMEM_MANUAL is not set
-CONFIG_SPARSEMEM_MANUAL=y
-CONFIG_SPARSEMEM=y
-CONFIG_HAVE_MEMORY_PRESENT=y
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
 CONFIG_SPARSEMEM_STATIC=y
 # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
-
-#
-# Memory hotplug is currently incompatible with Software Suspend
-#
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 CONFIG_RESOURCES_64BIT=y
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
-# CONFIG_HIGHPTE is not set
+CONFIG_HIGHPTE=y
 # CONFIG_MATH_EMULATION is not set
 CONFIG_MTRR=y
-# CONFIG_X86_PAT is not set
+# CONFIG_MTRR_SANITIZER is not set
+CONFIG_X86_PAT=y
 CONFIG_EFI=y
 # CONFIG_IRQBALANCE is not set
 CONFIG_SECCOMP=y
@@ -293,6 +295,7 @@ CONFIG_HZ=1000
 CONFIG_SCHED_HRTICK=y
 CONFIG_KEXEC=y
 CONFIG_CRASH_DUMP=y
+# CONFIG_KEXEC_JUMP is not set
 CONFIG_PHYSICAL_START=0x1000000
 CONFIG_RELOCATABLE=y
 CONFIG_PHYSICAL_ALIGN=0x200000
@@ -312,6 +315,7 @@ CONFIG_PM_TRACE_RTC=y
 CONFIG_PM_SLEEP_SMP=y
 CONFIG_PM_SLEEP=y
 CONFIG_SUSPEND=y
+# CONFIG_PM_TEST_SUSPEND is not set
 CONFIG_SUSPEND_FREEZER=y
 CONFIG_HIBERNATION=y
 CONFIG_PM_STD_PARTITION=""
@@ -337,6 +341,7 @@ CONFIG_ACPI_THERMAL=y
 CONFIG_ACPI_BLACKLIST_YEAR=0
 # CONFIG_ACPI_DEBUG is not set
 CONFIG_ACPI_EC=y
+# CONFIG_ACPI_PCI_SLOT is not set
 CONFIG_ACPI_POWER=y
 CONFIG_ACPI_SYSTEM=y
 CONFIG_X86_PM_TIMER=y
@@ -395,8 +400,8 @@ CONFIG_PCI=y
 # CONFIG_PCI_GOBIOS is not set
 # CONFIG_PCI_GOMMCONFIG is not set
 # CONFIG_PCI_GODIRECT is not set
-CONFIG_PCI_GOANY=y
 # CONFIG_PCI_GOOLPC is not set
+CONFIG_PCI_GOANY=y
 CONFIG_PCI_BIOS=y
 CONFIG_PCI_DIRECT=y
 CONFIG_PCI_MMCONFIG=y
@@ -448,10 +453,6 @@ CONFIG_HOTPLUG_PCI=y
 CONFIG_BINFMT_ELF=y
 # CONFIG_BINFMT_AOUT is not set
 CONFIG_BINFMT_MISC=y
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -475,7 +476,10 @@ CONFIG_IP_FIB_HASH=y
 CONFIG_IP_MULTIPLE_TABLES=y
 CONFIG_IP_ROUTE_MULTIPATH=y
 CONFIG_IP_ROUTE_VERBOSE=y
-# CONFIG_IP_PNP is not set
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+CONFIG_IP_PNP_RARP=y
 # CONFIG_NET_IPIP is not set
 # CONFIG_NET_IPGRE is not set
 CONFIG_IP_MROUTE=y
@@ -618,7 +622,6 @@ CONFIG_NET_SCHED=y
 # CONFIG_NET_SCH_HTB is not set
 # CONFIG_NET_SCH_HFSC is not set
 # CONFIG_NET_SCH_PRIO is not set
-# CONFIG_NET_SCH_RR is not set
 # CONFIG_NET_SCH_RED is not set
 # CONFIG_NET_SCH_SFQ is not set
 # CONFIG_NET_SCH_TEQL is not set
@@ -680,28 +683,19 @@ CONFIG_FIB_RULES=y
 CONFIG_CFG80211=y
 CONFIG_NL80211=y
 CONFIG_WIRELESS_EXT=y
+CONFIG_WIRELESS_EXT_SYSFS=y
 CONFIG_MAC80211=y
 
 #
 # Rate control algorithm selection
 #
+CONFIG_MAC80211_RC_PID=y
 CONFIG_MAC80211_RC_DEFAULT_PID=y
-# CONFIG_MAC80211_RC_DEFAULT_NONE is not set
-
-#
-# Selecting 'y' for an algorithm will
-#
-
-#
-# build the algorithm into mac80211.
-#
 CONFIG_MAC80211_RC_DEFAULT="pid"
-CONFIG_MAC80211_RC_PID=y
 # CONFIG_MAC80211_MESH is not set
 CONFIG_MAC80211_LEDS=y
 # CONFIG_MAC80211_DEBUGFS is not set
-# CONFIG_MAC80211_DEBUG_PACKET_ALIGNMENT is not set
-# CONFIG_MAC80211_DEBUG is not set
+# CONFIG_MAC80211_DEBUG_MENU is not set
 # CONFIG_IEEE80211 is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
@@ -717,6 +711,8 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_DEBUG_DRIVER is not set
 CONFIG_DEBUG_DEVRES=y
 # CONFIG_SYS_HYPERVISOR is not set
@@ -749,6 +745,7 @@ CONFIG_BLK_DEV_RAM_SIZE=16384
 # CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_IBM_ASM is not set
 # CONFIG_PHANTOM is not set
@@ -760,10 +757,12 @@ CONFIG_MISC_DEVICES=y
 # CONFIG_FUJITSU_LAPTOP is not set
 # CONFIG_TC1100_WMI is not set
 # CONFIG_MSI_LAPTOP is not set
+# CONFIG_COMPAL_LAPTOP is not set
 # CONFIG_SONY_LAPTOP is not set
 # CONFIG_THINKPAD_ACPI is not set
 # CONFIG_INTEL_MENLOW is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_HP_ILO is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -802,12 +801,13 @@ CONFIG_SCSI_WAIT_SCAN=m
 #
 CONFIG_SCSI_SPI_ATTRS=y
 # CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
+CONFIG_SCSI_ISCSI_ATTRS=y
 # CONFIG_SCSI_SAS_ATTRS is not set
 # CONFIG_SCSI_SAS_LIBSAS is not set
 # CONFIG_SCSI_SRP_ATTRS is not set
 # CONFIG_SCSI_LOWLEVEL is not set
 # CONFIG_SCSI_LOWLEVEL_PCMCIA is not set
+# CONFIG_SCSI_DH is not set
 CONFIG_ATA=y
 # CONFIG_ATA_NONSTANDARD is not set
 CONFIG_ATA_ACPI=y
@@ -842,7 +842,7 @@ CONFIG_PATA_AMD=y
 # CONFIG_PATA_CS5536 is not set
 # CONFIG_PATA_CYPRESS is not set
 # CONFIG_PATA_EFAR is not set
-# CONFIG_ATA_GENERIC is not set
+CONFIG_ATA_GENERIC=y
 # CONFIG_PATA_HPT366 is not set
 # CONFIG_PATA_HPT37X is not set
 # CONFIG_PATA_HPT3X2N is not set
@@ -852,7 +852,7 @@ CONFIG_PATA_AMD=y
 # CONFIG_PATA_JMICRON is not set
 # CONFIG_PATA_TRIFLEX is not set
 # CONFIG_PATA_MARVELL is not set
-# CONFIG_PATA_MPIIX is not set
+CONFIG_PATA_MPIIX=y
 CONFIG_PATA_OLDPIIX=y
 # CONFIG_PATA_NETCELL is not set
 # CONFIG_PATA_NINJA32 is not set
@@ -871,6 +871,7 @@ CONFIG_PATA_OLDPIIX=y
 # CONFIG_PATA_SIS is not set
 # CONFIG_PATA_VIA is not set
 # CONFIG_PATA_WINBOND is not set
+CONFIG_PATA_SCH=y
 CONFIG_MD=y
 CONFIG_BLK_DEV_MD=y
 # CONFIG_MD_LINEAR is not set
@@ -894,13 +895,16 @@ CONFIG_DM_ZERO=y
 #
 # IEEE 1394 (FireWire) support
 #
+
+#
+# Enable only one of the two stacks, unless you know what you are doing
+#
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 CONFIG_MACINTOSH_DRIVERS=y
 CONFIG_MAC_EMUMOUSEBTN=y
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 # CONFIG_IFB is not set
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
@@ -910,7 +914,23 @@ CONFIG_NETDEVICES=y
 # CONFIG_VETH is not set
 # CONFIG_NET_SB1000 is not set
 # CONFIG_ARCNET is not set
-# CONFIG_PHYLIB is not set
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+# CONFIG_MARVELL_PHY is not set
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+# CONFIG_SMSC_PHY is not set
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
+# CONFIG_FIXED_PHY is not set
+# CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
 # CONFIG_HAPPYMEAL is not set
@@ -943,10 +963,10 @@ CONFIG_FORCEDETH=y
 CONFIG_E100=y
 # CONFIG_FEALNX is not set
 # CONFIG_NATSEMI is not set
-# CONFIG_NE2K_PCI is not set
+CONFIG_NE2K_PCI=y
 # CONFIG_8139CP is not set
 CONFIG_8139TOO=y
-CONFIG_8139TOO_PIO=y
+# CONFIG_8139TOO_PIO is not set
 # CONFIG_8139TOO_TUNE_TWISTER is not set
 # CONFIG_8139TOO_8129 is not set
 # CONFIG_8139_OLD_RX_RESET is not set
@@ -961,25 +981,24 @@ CONFIG_NETDEV_1000=y
 # CONFIG_ACENIC is not set
 # CONFIG_DL2K is not set
 CONFIG_E1000=y
-# CONFIG_E1000_NAPI is not set
 # CONFIG_E1000_DISABLE_PACKET_SPLIT is not set
-# CONFIG_E1000E is not set
-# CONFIG_E1000E_ENABLED is not set
+CONFIG_E1000E=y
 # CONFIG_IP1000 is not set
 # CONFIG_IGB is not set
 # CONFIG_NS83820 is not set
 # CONFIG_HAMACHI is not set
 # CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
+CONFIG_R8169=y
 # CONFIG_SIS190 is not set
 # CONFIG_SKGE is not set
 CONFIG_SKY2=y
 # CONFIG_SKY2_DEBUG is not set
 # CONFIG_VIA_VELOCITY is not set
 CONFIG_TIGON3=y
-# CONFIG_BNX2 is not set
+CONFIG_BNX2=y
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
+# CONFIG_ATL1E is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
 # CONFIG_CHELSIO_T3 is not set
@@ -1019,13 +1038,14 @@ CONFIG_WLAN_80211=y
 # CONFIG_RTL8180 is not set
 # CONFIG_RTL8187 is not set
 # CONFIG_ADM8211 is not set
+# CONFIG_MAC80211_HWSIM is not set
 # CONFIG_P54_COMMON is not set
 CONFIG_ATH5K=y
 # CONFIG_ATH5K_DEBUG is not set
-# CONFIG_IWLWIFI is not set
+# CONFIG_ATH9K is not set
 # CONFIG_IWLCORE is not set
 # CONFIG_IWLWIFI_LEDS is not set
-# CONFIG_IWL4965 is not set
+# CONFIG_IWLAGN is not set
 # CONFIG_IWL3945 is not set
 # CONFIG_HOSTAP is not set
 # CONFIG_B43 is not set
@@ -1105,6 +1125,7 @@ CONFIG_MOUSE_PS2_TRACKPOINT=y
 # CONFIG_MOUSE_PS2_TOUCHKIT is not set
 # CONFIG_MOUSE_SERIAL is not set
 # CONFIG_MOUSE_APPLETOUCH is not set
+# CONFIG_MOUSE_BCM5974 is not set
 # CONFIG_MOUSE_VSXXXAA is not set
 CONFIG_INPUT_JOYSTICK=y
 # CONFIG_JOYSTICK_ANALOG is not set
@@ -1139,12 +1160,14 @@ CONFIG_INPUT_TOUCHSCREEN=y
 # CONFIG_TOUCHSCREEN_GUNZE is not set
 # CONFIG_TOUCHSCREEN_ELO is not set
 # CONFIG_TOUCHSCREEN_MTOUCH is not set
+# CONFIG_TOUCHSCREEN_INEXIO is not set
 # CONFIG_TOUCHSCREEN_MK712 is not set
 # CONFIG_TOUCHSCREEN_PENMOUNT is not set
 # CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
 # CONFIG_TOUCHSCREEN_TOUCHWIN is not set
 # CONFIG_TOUCHSCREEN_UCB1400 is not set
 # CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
+# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
 CONFIG_INPUT_MISC=y
 # CONFIG_INPUT_PCSPKR is not set
 # CONFIG_INPUT_APANEL is not set
@@ -1173,6 +1196,7 @@ CONFIG_SERIO_LIBPS2=y
 # Character devices
 #
 CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
 CONFIG_VT_HW_CONSOLE_BINDING=y
@@ -1223,8 +1247,8 @@ CONFIG_UNIX98_PTYS=y
 # CONFIG_LEGACY_PTYS is not set
 # CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
-# CONFIG_HW_RANDOM_INTEL is not set
-# CONFIG_HW_RANDOM_AMD is not set
+CONFIG_HW_RANDOM_INTEL=y
+CONFIG_HW_RANDOM_AMD=y
 CONFIG_HW_RANDOM_GEODE=y
 CONFIG_HW_RANDOM_VIA=y
 CONFIG_NVRAM=y
@@ -1245,7 +1269,6 @@ CONFIG_NVRAM=y
 # CONFIG_CS5535_GPIO is not set
 # CONFIG_RAW_DRIVER is not set
 CONFIG_HPET=y
-# CONFIG_HPET_RTC_IRQ is not set
 # CONFIG_HPET_MMAP is not set
 # CONFIG_HANGCHECK_TIMER is not set
 # CONFIG_TCG_TPM is not set
@@ -1254,43 +1277,64 @@ CONFIG_DEVPORT=y
 CONFIG_I2C=y
 CONFIG_I2C_BOARDINFO=y
 # CONFIG_I2C_CHARDEV is not set
+CONFIG_I2C_HELPER_AUTO=y
 
 #
 # I2C Hardware Bus support
 #
+
+#
+# PC SMBus host controller drivers
+#
 # CONFIG_I2C_ALI1535 is not set
 # CONFIG_I2C_ALI1563 is not set
 # CONFIG_I2C_ALI15X3 is not set
 # CONFIG_I2C_AMD756 is not set
 # CONFIG_I2C_AMD8111 is not set
 CONFIG_I2C_I801=y
-# CONFIG_I2C_I810 is not set
+# CONFIG_I2C_ISCH is not set
 # CONFIG_I2C_PIIX4 is not set
 # CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_PROSAVAGE is not set
-# CONFIG_I2C_SAVAGE4 is not set
-# CONFIG_I2C_SIMTEC is not set
-# CONFIG_SCx200_ACB is not set
 # CONFIG_I2C_SIS5595 is not set
 # CONFIG_I2C_SIS630 is not set
 # CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_TINY_USB is not set
 # CONFIG_I2C_VIA is not set
 # CONFIG_I2C_VIAPRO is not set
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Graphics adapter I2C/DDC channel drivers
+#
 # CONFIG_I2C_VOODOO3 is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
 # CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
+# CONFIG_SCx200_ACB is not set
 
 #
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
+# CONFIG_AT24 is not set
 # CONFIG_SENSORS_EEPROM is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
@@ -1299,6 +1343,8 @@ CONFIG_I2C_I801=y
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
 # CONFIG_SPI is not set
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+# CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
 CONFIG_POWER_SUPPLY=y
 # CONFIG_POWER_SUPPLY_DEBUG is not set
@@ -1360,8 +1406,10 @@ CONFIG_SSB_POSSIBLE=y
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
 
 #
 # Multimedia devices
@@ -1372,6 +1420,7 @@ CONFIG_SSB_POSSIBLE=y
 #
 # CONFIG_VIDEO_DEV is not set
 # CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
 
 #
 # Multimedia drivers
@@ -1418,7 +1467,6 @@ CONFIG_FB_CFB_IMAGEBLIT=y
 # CONFIG_FB_SYS_IMAGEBLIT is not set
 # CONFIG_FB_FOREIGN_ENDIAN is not set
 # CONFIG_FB_SYS_FOPS is not set
-CONFIG_FB_DEFERRED_IO=y
 # CONFIG_FB_SVGALIB is not set
 # CONFIG_FB_MACMODES is not set
 # CONFIG_FB_BACKLIGHT is not set
@@ -1463,6 +1511,7 @@ CONFIG_FB_EFI=y
 # CONFIG_FB_TRIDENT is not set
 # CONFIG_FB_ARK is not set
 # CONFIG_FB_PM3 is not set
+# CONFIG_FB_CARMINE is not set
 # CONFIG_FB_GEODE is not set
 # CONFIG_FB_VIRTUAL is not set
 CONFIG_BACKLIGHT_LCD_SUPPORT=y
@@ -1470,6 +1519,7 @@ CONFIG_BACKLIGHT_LCD_SUPPORT=y
 CONFIG_BACKLIGHT_CLASS_DEVICE=y
 # CONFIG_BACKLIGHT_CORGI is not set
 # CONFIG_BACKLIGHT_PROGEAR is not set
+# CONFIG_BACKLIGHT_MBP_NVIDIA is not set
 
 #
 # Display device support
@@ -1489,15 +1539,7 @@ CONFIG_LOGO=y
 # CONFIG_LOGO_LINUX_MONO is not set
 # CONFIG_LOGO_LINUX_VGA16 is not set
 CONFIG_LOGO_LINUX_CLUT224=y
-
-#
-# Sound
-#
 CONFIG_SOUND=y
-
-#
-# Advanced Linux Sound Architecture
-#
 CONFIG_SND=y
 CONFIG_SND_TIMER=y
 CONFIG_SND_PCM=y
@@ -1515,20 +1557,14 @@ CONFIG_SND_VERBOSE_PROCFS=y
 # CONFIG_SND_VERBOSE_PRINTK is not set
 # CONFIG_SND_DEBUG is not set
 CONFIG_SND_VMASTER=y
-
-#
-# Generic devices
-#
+CONFIG_SND_DRIVERS=y
 # CONFIG_SND_PCSP is not set
 # CONFIG_SND_DUMMY is not set
 # CONFIG_SND_VIRMIDI is not set
 # CONFIG_SND_MTPAV is not set
 # CONFIG_SND_SERIAL_U16550 is not set
 # CONFIG_SND_MPU401 is not set
-
-#
-# PCI devices
-#
+CONFIG_SND_PCI=y
 # CONFIG_SND_AD1889 is not set
 # CONFIG_SND_ALS300 is not set
 # CONFIG_SND_ALS4000 is not set
@@ -1603,36 +1639,14 @@ CONFIG_SND_HDA_GENERIC=y
 # CONFIG_SND_VIRTUOSO is not set
 # CONFIG_SND_VX222 is not set
 # CONFIG_SND_YMFPCI is not set
-
-#
-# USB devices
-#
+CONFIG_SND_USB=y
 # CONFIG_SND_USB_AUDIO is not set
 # CONFIG_SND_USB_USX2Y is not set
 # CONFIG_SND_USB_CAIAQ is not set
-
-#
-# PCMCIA devices
-#
+CONFIG_SND_PCMCIA=y
 # CONFIG_SND_VXPOCKET is not set
 # CONFIG_SND_PDAUDIOCF is not set
-
-#
-# System on Chip audio support
-#
 # CONFIG_SND_SOC is not set
-
-#
-# ALSA SoC audio for Freescale SOCs
-#
-
-#
-# SoC Audio for the Texas Instruments OMAP
-#
-
-#
-# Open Sound System
-#
 # CONFIG_SOUND_PRIME is not set
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
@@ -1668,6 +1682,7 @@ CONFIG_USB_DEVICEFS=y
 # CONFIG_USB_DYNAMIC_MINORS is not set
 CONFIG_USB_SUSPEND=y
 # CONFIG_USB_OTG is not set
+CONFIG_USB_MON=y
 
 #
 # USB Host Controller Drivers
@@ -1691,6 +1706,7 @@ CONFIG_USB_UHCI_HCD=y
 #
 # CONFIG_USB_ACM is not set
 CONFIG_USB_PRINTER=y
+# CONFIG_USB_WDM is not set
 
 #
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
@@ -1712,6 +1728,7 @@ CONFIG_USB_STORAGE=y
 # CONFIG_USB_STORAGE_ALAUDA is not set
 # CONFIG_USB_STORAGE_ONETOUCH is not set
 # CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_SIERRA is not set
 # CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
 CONFIG_USB_LIBUSUAL=y
 
@@ -1720,7 +1737,6 @@ CONFIG_USB_LIBUSUAL=y
 #
 # CONFIG_USB_MDC800 is not set
 # CONFIG_USB_MICROTEK is not set
-CONFIG_USB_MON=y
 
 #
 # USB port drivers
@@ -1733,7 +1749,6 @@ CONFIG_USB_MON=y
 # CONFIG_USB_EMI62 is not set
 # CONFIG_USB_EMI26 is not set
 # CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_AUERSWALD is not set
 # CONFIG_USB_RIO500 is not set
 # CONFIG_USB_LEGOTOWER is not set
 # CONFIG_USB_LCD is not set
@@ -1750,6 +1765,7 @@ CONFIG_USB_MON=y
 # CONFIG_USB_TRANCEVIBRATOR is not set
 # CONFIG_USB_IOWARRIOR is not set
 # CONFIG_USB_TEST is not set
+# CONFIG_USB_ISIGHTFW is not set
 # CONFIG_USB_GADGET is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
@@ -1759,7 +1775,9 @@ CONFIG_LEDS_CLASS=y
 #
 # LED drivers
 #
+# CONFIG_LEDS_PCA9532 is not set
 # CONFIG_LEDS_CLEVO_MAIL is not set
+# CONFIG_LEDS_PCA955X is not set
 
 #
 # LED Triggers
@@ -1805,6 +1823,7 @@ CONFIG_RTC_INTF_DEV=y
 # CONFIG_RTC_DRV_PCF8583 is not set
 # CONFIG_RTC_DRV_M41T80 is not set
 # CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
 
 #
 # SPI RTC drivers
@@ -1837,11 +1856,13 @@ CONFIG_DMADEVICES=y
 # Firmware Drivers
 #
 # CONFIG_EDD is not set
+CONFIG_FIRMWARE_MEMMAP=y
 CONFIG_EFI_VARS=y
 # CONFIG_DELL_RBU is not set
 # CONFIG_DCDBAS is not set
 CONFIG_DMIID=y
-# CONFIG_ISCSI_IBFT_FIND is not set
+CONFIG_ISCSI_IBFT_FIND=y
+CONFIG_ISCSI_IBFT=y
 
 #
 # File systems
@@ -1920,14 +1941,27 @@ CONFIG_HUGETLB_PAGE=y
 # CONFIG_CRAMFS is not set
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
 # CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
-# CONFIG_NFS_FS is not set
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+CONFIG_NFS_V3_ACL=y
+CONFIG_NFS_V4=y
+CONFIG_ROOT_NFS=y
 # CONFIG_NFSD is not set
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_ACL_SUPPORT=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+CONFIG_SUNRPC_GSS=y
+CONFIG_RPCSEC_GSS_KRB5=y
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
 # CONFIG_CIFS is not set
 # CONFIG_NCP_FS is not set
@@ -2001,9 +2035,9 @@ CONFIG_NLS_UTF8=y
 # Kernel hacking
 #
 CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-# CONFIG_PRINTK_TIME is not set
-# CONFIG_ENABLE_WARN_DEPRECATED is not set
-# CONFIG_ENABLE_MUST_CHECK is not set
+CONFIG_PRINTK_TIME=y
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_FRAME_WARN=2048
 CONFIG_MAGIC_SYSRQ=y
 # CONFIG_UNUSED_SYMBOLS is not set
@@ -2033,6 +2067,7 @@ CONFIG_DEBUG_BUGVERBOSE=y
 # CONFIG_DEBUG_INFO is not set
 # CONFIG_DEBUG_VM is not set
 # CONFIG_DEBUG_WRITECOUNT is not set
+CONFIG_DEBUG_MEMORY_INIT=y
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 CONFIG_FRAME_POINTER=y
@@ -2043,23 +2078,32 @@ CONFIG_FRAME_POINTER=y
 # CONFIG_LKDTM is not set
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_LATENCYTOP is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+# CONFIG_FTRACE is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_SYSPROF_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
 CONFIG_PROVIDE_OHCI1394_DMA_INIT=y
 # CONFIG_SAMPLES is not set
-# CONFIG_KGDB is not set
 CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
 # CONFIG_STRICT_DEVMEM is not set
+CONFIG_X86_VERBOSE_BOOTUP=y
 CONFIG_EARLY_PRINTK=y
 CONFIG_DEBUG_STACKOVERFLOW=y
 CONFIG_DEBUG_STACK_USAGE=y
 # CONFIG_DEBUG_PAGEALLOC is not set
+# CONFIG_DEBUG_PER_CPU_MAPS is not set
 # CONFIG_X86_PTDUMP is not set
 CONFIG_DEBUG_RODATA=y
 # CONFIG_DEBUG_RODATA_TEST is not set
 CONFIG_DEBUG_NX_TEST=m
 # CONFIG_4KSTACKS is not set
-CONFIG_X86_FIND_SMP_CONFIG=y
-CONFIG_X86_MPPARSE=y
 CONFIG_DOUBLEFAULT=y
+# CONFIG_MMIOTRACE is not set
 CONFIG_IO_DELAY_TYPE_0X80=0
 CONFIG_IO_DELAY_TYPE_0XED=1
 CONFIG_IO_DELAY_TYPE_UDELAY=2
@@ -2071,6 +2115,7 @@ CONFIG_IO_DELAY_0X80=y
 CONFIG_DEFAULT_IO_DELAY_TYPE=0
 CONFIG_DEBUG_BOOT_PARAMS=y
 # CONFIG_CPA_DEBUG is not set
+# CONFIG_OPTIMIZE_INLINING is not set
 
 #
 # Security options
@@ -2080,7 +2125,6 @@ CONFIG_KEYS_DEBUG_PROC_KEYS=y
 CONFIG_SECURITY=y
 CONFIG_SECURITY_NETWORK=y
 # CONFIG_SECURITY_NETWORK_XFRM is not set
-CONFIG_SECURITY_CAPABILITIES=y
 CONFIG_SECURITY_FILE_CAPABILITIES=y
 # CONFIG_SECURITY_ROOTPLUG is not set
 CONFIG_SECURITY_DEFAULT_MMAP_MIN_ADDR=65536
@@ -2141,6 +2185,10 @@ CONFIG_CRYPTO_HMAC=y
 # CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=y
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
 CONFIG_CRYPTO_SHA1=y
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
@@ -2151,7 +2199,7 @@ CONFIG_CRYPTO_SHA1=y
 # Ciphers
 #
 CONFIG_CRYPTO_AES=y
-# CONFIG_CRYPTO_AES_586 is not set
+CONFIG_CRYPTO_AES_586=y
 # CONFIG_CRYPTO_ANUBIS is not set
 CONFIG_CRYPTO_ARC4=y
 # CONFIG_CRYPTO_BLOWFISH is not set
@@ -2193,6 +2241,7 @@ CONFIG_GENERIC_FIND_FIRST_BIT=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
+CONFIG_CRC_T10DIF=y
 # CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
diff --git a/arch/x86/configs/x86_64_defconfig b/arch/x86/configs/x86_64_defconfig
index a40452429625..678c8acefe04 100644
--- a/arch/x86/configs/x86_64_defconfig
+++ b/arch/x86/configs/x86_64_defconfig
@@ -1,13 +1,13 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc1
-# Sun May  4 19:59:57 2008
+# Linux kernel version: 2.6.27-rc4
+# Mon Aug 25 14:40:46 2008
 #
 CONFIG_64BIT=y
 # CONFIG_X86_32 is not set
 CONFIG_X86_64=y
 CONFIG_X86=y
-CONFIG_DEFCONFIG_LIST="arch/x86/configs/x86_64_defconfig"
+CONFIG_ARCH_DEFCONFIG="arch/x86/configs/x86_64_defconfig"
 # CONFIG_GENERIC_LOCKBREAK is not set
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CMOS_UPDATE=y
@@ -53,6 +53,7 @@ CONFIG_X86_HT=y
 CONFIG_X86_BIOS_REBOOT=y
 CONFIG_X86_TRAMPOLINE=y
 # CONFIG_KTIME_SCALAR is not set
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
 # General setup
@@ -82,6 +83,7 @@ CONFIG_CGROUPS=y
 CONFIG_CGROUP_NS=y
 # CONFIG_CGROUP_DEVICE is not set
 CONFIG_CPUSETS=y
+CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y
 CONFIG_GROUP_SCHED=y
 CONFIG_FAIR_GROUP_SCHED=y
 # CONFIG_RT_GROUP_SCHED is not set
@@ -105,7 +107,6 @@ CONFIG_SYSCTL=y
 # CONFIG_EMBEDDED is not set
 CONFIG_UID16=y
 CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
 CONFIG_KALLSYMS_EXTRA_PASS=y
@@ -113,6 +114,7 @@ CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
+CONFIG_PCSPKR_PLATFORM=y
 # CONFIG_COMPAT_BRK is not set
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
@@ -132,25 +134,33 @@ CONFIG_MARKERS=y
 # CONFIG_OPROFILE is not set
 CONFIG_HAVE_OPROFILE=y
 CONFIG_KPROBES=y
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
 CONFIG_KRETPROBES=y
+CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
+# CONFIG_HAVE_ARCH_TRACEHOOK is not set
 # CONFIG_HAVE_DMA_ATTRS is not set
+CONFIG_USE_GENERIC_SMP_HELPERS=y
+# CONFIG_HAVE_CLK is not set
 CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
 CONFIG_MODULE_FORCE_UNLOAD=y
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-# CONFIG_KMOD is not set
+CONFIG_KMOD=y
 CONFIG_STOP_MACHINE=y
 CONFIG_BLOCK=y
 CONFIG_BLK_DEV_IO_TRACE=y
 CONFIG_BLK_DEV_BSG=y
+# CONFIG_BLK_DEV_INTEGRITY is not set
 CONFIG_BLOCK_COMPAT=y
 
 #
@@ -175,20 +185,15 @@ CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
 CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
 CONFIG_SMP=y
+CONFIG_X86_FIND_SMP_CONFIG=y
+CONFIG_X86_MPPARSE=y
 CONFIG_X86_PC=y
 # CONFIG_X86_ELAN is not set
 # CONFIG_X86_VOYAGER is not set
-# CONFIG_X86_NUMAQ is not set
-# CONFIG_X86_SUMMIT is not set
-# CONFIG_X86_BIGSMP is not set
-# CONFIG_X86_VISWS is not set
 # CONFIG_X86_GENERICARCH is not set
-# CONFIG_X86_ES7000 is not set
-# CONFIG_X86_RDC321X is not set
 # CONFIG_X86_VSMP is not set
 # CONFIG_PARAVIRT_GUEST is not set
-CONFIG_MEMTEST_BOOTPARAM=y
-CONFIG_MEMTEST_BOOTPARAM_VALUE=0
+# CONFIG_MEMTEST is not set
 # CONFIG_M386 is not set
 # CONFIG_M486 is not set
 # CONFIG_M586 is not set
@@ -220,11 +225,12 @@ CONFIG_X86_L1_CACHE_BYTES=64
 CONFIG_X86_INTERNODE_CACHE_BYTES=64
 CONFIG_X86_CMPXCHG=y
 CONFIG_X86_L1_CACHE_SHIFT=6
-CONFIG_X86_GOOD_APIC=y
+CONFIG_X86_WP_WORKS_OK=y
 CONFIG_X86_INTEL_USERCOPY=y
 CONFIG_X86_USE_PPRO_CHECKSUM=y
 CONFIG_X86_P6_NOP=y
 CONFIG_X86_TSC=y
+CONFIG_X86_CMPXCHG64=y
 CONFIG_X86_CMOV=y
 CONFIG_X86_MINIMUM_CPU_FAMILY=64
 CONFIG_X86_DEBUGCTLMSR=y
@@ -234,8 +240,10 @@ CONFIG_DMI=y
 CONFIG_GART_IOMMU=y
 CONFIG_CALGARY_IOMMU=y
 CONFIG_CALGARY_IOMMU_ENABLED_BY_DEFAULT=y
+CONFIG_AMD_IOMMU=y
 CONFIG_SWIOTLB=y
 CONFIG_IOMMU_HELPER=y
+# CONFIG_MAXSMP is not set
 CONFIG_NR_CPUS=4
 # CONFIG_SCHED_SMT is not set
 CONFIG_SCHED_MC=y
@@ -281,6 +289,7 @@ CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
 CONFIG_MTRR=y
+# CONFIG_MTRR_SANITIZER is not set
 # CONFIG_X86_PAT is not set
 CONFIG_EFI=y
 CONFIG_SECCOMP=y
@@ -313,6 +322,7 @@ CONFIG_PM_TRACE_RTC=y
 CONFIG_PM_SLEEP_SMP=y
 CONFIG_PM_SLEEP=y
 CONFIG_SUSPEND=y
+# CONFIG_PM_TEST_SUSPEND is not set
 CONFIG_SUSPEND_FREEZER=y
 CONFIG_HIBERNATION=y
 CONFIG_PM_STD_PARTITION=""
@@ -339,6 +349,7 @@ CONFIG_ACPI_NUMA=y
 CONFIG_ACPI_BLACKLIST_YEAR=0
 # CONFIG_ACPI_DEBUG is not set
 CONFIG_ACPI_EC=y
+# CONFIG_ACPI_PCI_SLOT is not set
 CONFIG_ACPI_POWER=y
 CONFIG_ACPI_SYSTEM=y
 CONFIG_X86_PM_TIMER=y
@@ -437,10 +448,6 @@ CONFIG_IA32_EMULATION=y
 CONFIG_COMPAT=y
 CONFIG_COMPAT_FOR_U64_ALIGNMENT=y
 CONFIG_SYSVIPC_COMPAT=y
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -464,7 +471,10 @@ CONFIG_IP_FIB_HASH=y
 CONFIG_IP_MULTIPLE_TABLES=y
 CONFIG_IP_ROUTE_MULTIPATH=y
 CONFIG_IP_ROUTE_VERBOSE=y
-# CONFIG_IP_PNP is not set
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+CONFIG_IP_PNP_RARP=y
 # CONFIG_NET_IPIP is not set
 # CONFIG_NET_IPGRE is not set
 CONFIG_IP_MROUTE=y
@@ -607,7 +617,6 @@ CONFIG_NET_SCHED=y
 # CONFIG_NET_SCH_HTB is not set
 # CONFIG_NET_SCH_HFSC is not set
 # CONFIG_NET_SCH_PRIO is not set
-# CONFIG_NET_SCH_RR is not set
 # CONFIG_NET_SCH_RED is not set
 # CONFIG_NET_SCH_SFQ is not set
 # CONFIG_NET_SCH_TEQL is not set
@@ -669,28 +678,19 @@ CONFIG_FIB_RULES=y
 CONFIG_CFG80211=y
 CONFIG_NL80211=y
 CONFIG_WIRELESS_EXT=y
+CONFIG_WIRELESS_EXT_SYSFS=y
 CONFIG_MAC80211=y
 
 #
 # Rate control algorithm selection
 #
+CONFIG_MAC80211_RC_PID=y
 CONFIG_MAC80211_RC_DEFAULT_PID=y
-# CONFIG_MAC80211_RC_DEFAULT_NONE is not set
-
-#
-# Selecting 'y' for an algorithm will
-#
-
-#
-# build the algorithm into mac80211.
-#
 CONFIG_MAC80211_RC_DEFAULT="pid"
-CONFIG_MAC80211_RC_PID=y
 # CONFIG_MAC80211_MESH is not set
 CONFIG_MAC80211_LEDS=y
 # CONFIG_MAC80211_DEBUGFS is not set
-# CONFIG_MAC80211_DEBUG_PACKET_ALIGNMENT is not set
-# CONFIG_MAC80211_DEBUG is not set
+# CONFIG_MAC80211_DEBUG_MENU is not set
 # CONFIG_IEEE80211 is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
@@ -706,6 +706,8 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_DEBUG_DRIVER is not set
 CONFIG_DEBUG_DEVRES=y
 # CONFIG_SYS_HYPERVISOR is not set
@@ -738,6 +740,7 @@ CONFIG_BLK_DEV_RAM_SIZE=16384
 # CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_IBM_ASM is not set
 # CONFIG_PHANTOM is not set
@@ -748,10 +751,14 @@ CONFIG_MISC_DEVICES=y
 # CONFIG_ASUS_LAPTOP is not set
 # CONFIG_FUJITSU_LAPTOP is not set
 # CONFIG_MSI_LAPTOP is not set
+# CONFIG_COMPAL_LAPTOP is not set
 # CONFIG_SONY_LAPTOP is not set
 # CONFIG_THINKPAD_ACPI is not set
 # CONFIG_INTEL_MENLOW is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_SGI_XP is not set
+# CONFIG_HP_ILO is not set
+# CONFIG_SGI_GRU is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -790,12 +797,13 @@ CONFIG_SCSI_WAIT_SCAN=m
 #
 CONFIG_SCSI_SPI_ATTRS=y
 # CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
+CONFIG_SCSI_ISCSI_ATTRS=y
 # CONFIG_SCSI_SAS_ATTRS is not set
 # CONFIG_SCSI_SAS_LIBSAS is not set
 # CONFIG_SCSI_SRP_ATTRS is not set
 # CONFIG_SCSI_LOWLEVEL is not set
 # CONFIG_SCSI_LOWLEVEL_PCMCIA is not set
+# CONFIG_SCSI_DH is not set
 CONFIG_ATA=y
 # CONFIG_ATA_NONSTANDARD is not set
 CONFIG_ATA_ACPI=y
@@ -857,6 +865,7 @@ CONFIG_PATA_OLDPIIX=y
 # CONFIG_PATA_SIS is not set
 # CONFIG_PATA_VIA is not set
 # CONFIG_PATA_WINBOND is not set
+CONFIG_PATA_SCH=y
 CONFIG_MD=y
 CONFIG_BLK_DEV_MD=y
 # CONFIG_MD_LINEAR is not set
@@ -880,13 +889,16 @@ CONFIG_DM_ZERO=y
 #
 # IEEE 1394 (FireWire) support
 #
+
+#
+# Enable only one of the two stacks, unless you know what you are doing
+#
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 CONFIG_MACINTOSH_DRIVERS=y
 CONFIG_MAC_EMUMOUSEBTN=y
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 # CONFIG_IFB is not set
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
@@ -896,7 +908,23 @@ CONFIG_NETDEVICES=y
 # CONFIG_VETH is not set
 # CONFIG_NET_SB1000 is not set
 # CONFIG_ARCNET is not set
-# CONFIG_PHYLIB is not set
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+# CONFIG_MARVELL_PHY is not set
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+# CONFIG_SMSC_PHY is not set
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
+# CONFIG_FIXED_PHY is not set
+# CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
 # CONFIG_HAPPYMEAL is not set
@@ -940,16 +968,15 @@ CONFIG_8139TOO_PIO=y
 # CONFIG_SIS900 is not set
 # CONFIG_EPIC100 is not set
 # CONFIG_SUNDANCE is not set
+# CONFIG_TLAN is not set
 # CONFIG_VIA_RHINE is not set
 # CONFIG_SC92031 is not set
 CONFIG_NETDEV_1000=y
 # CONFIG_ACENIC is not set
 # CONFIG_DL2K is not set
 CONFIG_E1000=y
-# CONFIG_E1000_NAPI is not set
 # CONFIG_E1000_DISABLE_PACKET_SPLIT is not set
 # CONFIG_E1000E is not set
-# CONFIG_E1000E_ENABLED is not set
 # CONFIG_IP1000 is not set
 # CONFIG_IGB is not set
 # CONFIG_NS83820 is not set
@@ -965,6 +992,7 @@ CONFIG_TIGON3=y
 # CONFIG_BNX2 is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
+# CONFIG_ATL1E is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
 # CONFIG_CHELSIO_T3 is not set
@@ -1003,13 +1031,14 @@ CONFIG_WLAN_80211=y
 # CONFIG_RTL8180 is not set
 # CONFIG_RTL8187 is not set
 # CONFIG_ADM8211 is not set
+# CONFIG_MAC80211_HWSIM is not set
 # CONFIG_P54_COMMON is not set
 CONFIG_ATH5K=y
 # CONFIG_ATH5K_DEBUG is not set
-# CONFIG_IWLWIFI is not set
+# CONFIG_ATH9K is not set
 # CONFIG_IWLCORE is not set
 # CONFIG_IWLWIFI_LEDS is not set
-# CONFIG_IWL4965 is not set
+# CONFIG_IWLAGN is not set
 # CONFIG_IWL3945 is not set
 # CONFIG_HOSTAP is not set
 # CONFIG_B43 is not set
@@ -1088,6 +1117,7 @@ CONFIG_MOUSE_PS2_TRACKPOINT=y
 # CONFIG_MOUSE_PS2_TOUCHKIT is not set
 # CONFIG_MOUSE_SERIAL is not set
 # CONFIG_MOUSE_APPLETOUCH is not set
+# CONFIG_MOUSE_BCM5974 is not set
 # CONFIG_MOUSE_VSXXXAA is not set
 CONFIG_INPUT_JOYSTICK=y
 # CONFIG_JOYSTICK_ANALOG is not set
@@ -1122,12 +1152,14 @@ CONFIG_INPUT_TOUCHSCREEN=y
 # CONFIG_TOUCHSCREEN_GUNZE is not set
 # CONFIG_TOUCHSCREEN_ELO is not set
 # CONFIG_TOUCHSCREEN_MTOUCH is not set
+# CONFIG_TOUCHSCREEN_INEXIO is not set
 # CONFIG_TOUCHSCREEN_MK712 is not set
 # CONFIG_TOUCHSCREEN_PENMOUNT is not set
 # CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
 # CONFIG_TOUCHSCREEN_TOUCHWIN is not set
 # CONFIG_TOUCHSCREEN_UCB1400 is not set
 # CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
+# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
 CONFIG_INPUT_MISC=y
 # CONFIG_INPUT_PCSPKR is not set
 # CONFIG_INPUT_APANEL is not set
@@ -1155,6 +1187,7 @@ CONFIG_SERIO_LIBPS2=y
 # Character devices
 #
 CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
 CONFIG_VT_HW_CONSOLE_BINDING=y
@@ -1222,7 +1255,6 @@ CONFIG_NVRAM=y
 # CONFIG_PC8736x_GPIO is not set
 # CONFIG_RAW_DRIVER is not set
 CONFIG_HPET=y
-# CONFIG_HPET_RTC_IRQ is not set
 # CONFIG_HPET_MMAP is not set
 # CONFIG_HANGCHECK_TIMER is not set
 # CONFIG_TCG_TPM is not set
@@ -1231,42 +1263,63 @@ CONFIG_DEVPORT=y
 CONFIG_I2C=y
 CONFIG_I2C_BOARDINFO=y
 # CONFIG_I2C_CHARDEV is not set
+CONFIG_I2C_HELPER_AUTO=y
 
 #
 # I2C Hardware Bus support
 #
+
+#
+# PC SMBus host controller drivers
+#
 # CONFIG_I2C_ALI1535 is not set
 # CONFIG_I2C_ALI1563 is not set
 # CONFIG_I2C_ALI15X3 is not set
 # CONFIG_I2C_AMD756 is not set
 # CONFIG_I2C_AMD8111 is not set
 CONFIG_I2C_I801=y
-# CONFIG_I2C_I810 is not set
+# CONFIG_I2C_ISCH is not set
 # CONFIG_I2C_PIIX4 is not set
 # CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_PROSAVAGE is not set
-# CONFIG_I2C_SAVAGE4 is not set
-# CONFIG_I2C_SIMTEC is not set
 # CONFIG_I2C_SIS5595 is not set
 # CONFIG_I2C_SIS630 is not set
 # CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_TINY_USB is not set
 # CONFIG_I2C_VIA is not set
 # CONFIG_I2C_VIAPRO is not set
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Graphics adapter I2C/DDC channel drivers
+#
 # CONFIG_I2C_VOODOO3 is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
 # CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
 
 #
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
+# CONFIG_AT24 is not set
 # CONFIG_SENSORS_EEPROM is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
@@ -1275,6 +1328,8 @@ CONFIG_I2C_I801=y
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
 # CONFIG_SPI is not set
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+# CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
 CONFIG_POWER_SUPPLY=y
 # CONFIG_POWER_SUPPLY_DEBUG is not set
@@ -1335,8 +1390,10 @@ CONFIG_SSB_POSSIBLE=y
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
 
 #
 # Multimedia devices
@@ -1347,6 +1404,7 @@ CONFIG_SSB_POSSIBLE=y
 #
 # CONFIG_VIDEO_DEV is not set
 # CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
 
 #
 # Multimedia drivers
@@ -1387,7 +1445,6 @@ CONFIG_FB_CFB_IMAGEBLIT=y
 # CONFIG_FB_SYS_IMAGEBLIT is not set
 # CONFIG_FB_FOREIGN_ENDIAN is not set
 # CONFIG_FB_SYS_FOPS is not set
-CONFIG_FB_DEFERRED_IO=y
 # CONFIG_FB_SVGALIB is not set
 # CONFIG_FB_MACMODES is not set
 # CONFIG_FB_BACKLIGHT is not set
@@ -1430,6 +1487,7 @@ CONFIG_FB_EFI=y
 # CONFIG_FB_TRIDENT is not set
 # CONFIG_FB_ARK is not set
 # CONFIG_FB_PM3 is not set
+# CONFIG_FB_CARMINE is not set
 # CONFIG_FB_GEODE is not set
 # CONFIG_FB_VIRTUAL is not set
 CONFIG_BACKLIGHT_LCD_SUPPORT=y
@@ -1437,6 +1495,7 @@ CONFIG_BACKLIGHT_LCD_SUPPORT=y
 CONFIG_BACKLIGHT_CLASS_DEVICE=y
 # CONFIG_BACKLIGHT_CORGI is not set
 # CONFIG_BACKLIGHT_PROGEAR is not set
+# CONFIG_BACKLIGHT_MBP_NVIDIA is not set
 
 #
 # Display device support
@@ -1456,15 +1515,7 @@ CONFIG_LOGO=y
 # CONFIG_LOGO_LINUX_MONO is not set
 # CONFIG_LOGO_LINUX_VGA16 is not set
 CONFIG_LOGO_LINUX_CLUT224=y
-
-#
-# Sound
-#
 CONFIG_SOUND=y
-
-#
-# Advanced Linux Sound Architecture
-#
 CONFIG_SND=y
 CONFIG_SND_TIMER=y
 CONFIG_SND_PCM=y
@@ -1482,20 +1533,14 @@ CONFIG_SND_VERBOSE_PROCFS=y
 # CONFIG_SND_VERBOSE_PRINTK is not set
 # CONFIG_SND_DEBUG is not set
 CONFIG_SND_VMASTER=y
-
-#
-# Generic devices
-#
+CONFIG_SND_DRIVERS=y
 # CONFIG_SND_PCSP is not set
 # CONFIG_SND_DUMMY is not set
 # CONFIG_SND_VIRMIDI is not set
 # CONFIG_SND_MTPAV is not set
 # CONFIG_SND_SERIAL_U16550 is not set
 # CONFIG_SND_MPU401 is not set
-
-#
-# PCI devices
-#
+CONFIG_SND_PCI=y
 # CONFIG_SND_AD1889 is not set
 # CONFIG_SND_ALS300 is not set
 # CONFIG_SND_ALS4000 is not set
@@ -1568,36 +1613,14 @@ CONFIG_SND_HDA_GENERIC=y
 # CONFIG_SND_VIRTUOSO is not set
 # CONFIG_SND_VX222 is not set
 # CONFIG_SND_YMFPCI is not set
-
-#
-# USB devices
-#
+CONFIG_SND_USB=y
 # CONFIG_SND_USB_AUDIO is not set
 # CONFIG_SND_USB_USX2Y is not set
 # CONFIG_SND_USB_CAIAQ is not set
-
-#
-# PCMCIA devices
-#
+CONFIG_SND_PCMCIA=y
 # CONFIG_SND_VXPOCKET is not set
 # CONFIG_SND_PDAUDIOCF is not set
-
-#
-# System on Chip audio support
-#
 # CONFIG_SND_SOC is not set
-
-#
-# ALSA SoC audio for Freescale SOCs
-#
-
-#
-# SoC Audio for the Texas Instruments OMAP
-#
-
-#
-# Open Sound System
-#
 # CONFIG_SOUND_PRIME is not set
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
@@ -1633,6 +1656,7 @@ CONFIG_USB_DEVICEFS=y
 # CONFIG_USB_DYNAMIC_MINORS is not set
 CONFIG_USB_SUSPEND=y
 # CONFIG_USB_OTG is not set
+CONFIG_USB_MON=y
 
 #
 # USB Host Controller Drivers
@@ -1656,6 +1680,7 @@ CONFIG_USB_UHCI_HCD=y
 #
 # CONFIG_USB_ACM is not set
 CONFIG_USB_PRINTER=y
+# CONFIG_USB_WDM is not set
 
 #
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
@@ -1677,6 +1702,7 @@ CONFIG_USB_STORAGE=y
 # CONFIG_USB_STORAGE_ALAUDA is not set
 # CONFIG_USB_STORAGE_ONETOUCH is not set
 # CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_SIERRA is not set
 # CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
 CONFIG_USB_LIBUSUAL=y
 
@@ -1685,7 +1711,6 @@ CONFIG_USB_LIBUSUAL=y
 #
 # CONFIG_USB_MDC800 is not set
 # CONFIG_USB_MICROTEK is not set
-CONFIG_USB_MON=y
 
 #
 # USB port drivers
@@ -1698,7 +1723,6 @@ CONFIG_USB_MON=y
 # CONFIG_USB_EMI62 is not set
 # CONFIG_USB_EMI26 is not set
 # CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_AUERSWALD is not set
 # CONFIG_USB_RIO500 is not set
 # CONFIG_USB_LEGOTOWER is not set
 # CONFIG_USB_LCD is not set
@@ -1715,6 +1739,7 @@ CONFIG_USB_MON=y
 # CONFIG_USB_TRANCEVIBRATOR is not set
 # CONFIG_USB_IOWARRIOR is not set
 # CONFIG_USB_TEST is not set
+# CONFIG_USB_ISIGHTFW is not set
 # CONFIG_USB_GADGET is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
@@ -1724,7 +1749,9 @@ CONFIG_LEDS_CLASS=y
 #
 # LED drivers
 #
+# CONFIG_LEDS_PCA9532 is not set
 # CONFIG_LEDS_CLEVO_MAIL is not set
+# CONFIG_LEDS_PCA955X is not set
 
 #
 # LED Triggers
@@ -1770,6 +1797,7 @@ CONFIG_RTC_INTF_DEV=y
 # CONFIG_RTC_DRV_PCF8583 is not set
 # CONFIG_RTC_DRV_M41T80 is not set
 # CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
 
 #
 # SPI RTC drivers
@@ -1802,11 +1830,13 @@ CONFIG_DMADEVICES=y
 # Firmware Drivers
 #
 # CONFIG_EDD is not set
+CONFIG_FIRMWARE_MEMMAP=y
 CONFIG_EFI_VARS=y
 # CONFIG_DELL_RBU is not set
 # CONFIG_DCDBAS is not set
 CONFIG_DMIID=y
-# CONFIG_ISCSI_IBFT_FIND is not set
+CONFIG_ISCSI_IBFT_FIND=y
+CONFIG_ISCSI_IBFT=y
 
 #
 # File systems
@@ -1886,14 +1916,27 @@ CONFIG_HUGETLB_PAGE=y
 # CONFIG_CRAMFS is not set
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
 # CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
-# CONFIG_NFS_FS is not set
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+CONFIG_NFS_V3_ACL=y
+CONFIG_NFS_V4=y
+CONFIG_ROOT_NFS=y
 # CONFIG_NFSD is not set
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_ACL_SUPPORT=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+CONFIG_SUNRPC_GSS=y
+CONFIG_RPCSEC_GSS_KRB5=y
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
 # CONFIG_CIFS is not set
 # CONFIG_NCP_FS is not set
@@ -1967,9 +2010,9 @@ CONFIG_NLS_UTF8=y
 # Kernel hacking
 #
 CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-# CONFIG_PRINTK_TIME is not set
-# CONFIG_ENABLE_WARN_DEPRECATED is not set
-# CONFIG_ENABLE_MUST_CHECK is not set
+CONFIG_PRINTK_TIME=y
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_FRAME_WARN=2048
 CONFIG_MAGIC_SYSRQ=y
 # CONFIG_UNUSED_SYMBOLS is not set
@@ -1998,6 +2041,7 @@ CONFIG_DEBUG_BUGVERBOSE=y
 # CONFIG_DEBUG_INFO is not set
 # CONFIG_DEBUG_VM is not set
 # CONFIG_DEBUG_WRITECOUNT is not set
+CONFIG_DEBUG_MEMORY_INIT=y
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 CONFIG_FRAME_POINTER=y
@@ -2008,11 +2052,20 @@ CONFIG_FRAME_POINTER=y
 # CONFIG_LKDTM is not set
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_LATENCYTOP is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+# CONFIG_FTRACE is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_SYSPROF_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
 CONFIG_PROVIDE_OHCI1394_DMA_INIT=y
 # CONFIG_SAMPLES is not set
-# CONFIG_KGDB is not set
 CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
 # CONFIG_STRICT_DEVMEM is not set
+CONFIG_X86_VERBOSE_BOOTUP=y
 CONFIG_EARLY_PRINTK=y
 CONFIG_DEBUG_STACKOVERFLOW=y
 CONFIG_DEBUG_STACK_USAGE=y
@@ -2023,8 +2076,8 @@ CONFIG_DEBUG_RODATA=y
 # CONFIG_DIRECT_GBPAGES is not set
 # CONFIG_DEBUG_RODATA_TEST is not set
 CONFIG_DEBUG_NX_TEST=m
-CONFIG_X86_MPPARSE=y
 # CONFIG_IOMMU_DEBUG is not set
+# CONFIG_MMIOTRACE is not set
 CONFIG_IO_DELAY_TYPE_0X80=0
 CONFIG_IO_DELAY_TYPE_0XED=1
 CONFIG_IO_DELAY_TYPE_UDELAY=2
@@ -2036,6 +2089,7 @@ CONFIG_IO_DELAY_0X80=y
 CONFIG_DEFAULT_IO_DELAY_TYPE=0
 CONFIG_DEBUG_BOOT_PARAMS=y
 # CONFIG_CPA_DEBUG is not set
+# CONFIG_OPTIMIZE_INLINING is not set
 
 #
 # Security options
@@ -2045,7 +2099,6 @@ CONFIG_KEYS_DEBUG_PROC_KEYS=y
 CONFIG_SECURITY=y
 CONFIG_SECURITY_NETWORK=y
 # CONFIG_SECURITY_NETWORK_XFRM is not set
-CONFIG_SECURITY_CAPABILITIES=y
 CONFIG_SECURITY_FILE_CAPABILITIES=y
 # CONFIG_SECURITY_ROOTPLUG is not set
 CONFIG_SECURITY_DEFAULT_MMAP_MIN_ADDR=65536
@@ -2106,6 +2159,10 @@ CONFIG_CRYPTO_HMAC=y
 # CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=y
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
 CONFIG_CRYPTO_SHA1=y
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
@@ -2155,6 +2212,7 @@ CONFIG_GENERIC_FIND_FIRST_BIT=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
+CONFIG_CRC_T10DIF=y
 # CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
diff --git a/arch/x86/ia32/ia32_aout.c b/arch/x86/ia32/ia32_aout.c
index 58cccb6483b0..a0e1dbe67dc1 100644
--- a/arch/x86/ia32/ia32_aout.c
+++ b/arch/x86/ia32/ia32_aout.c
@@ -441,12 +441,6 @@ beyond_if:
 	regs->r8 = regs->r9 = regs->r10 = regs->r11 =
 	regs->r12 = regs->r13 = regs->r14 = regs->r15 = 0;
 	set_fs(USER_DS);
-	if (unlikely(current->ptrace & PT_PTRACED)) {
-		if (current->ptrace & PT_TRACE_EXEC)
-			ptrace_notify((PTRACE_EVENT_EXEC << 8) | SIGTRAP);
-		else
-			send_sig(SIGTRAP, current, 0);
-	}
 	return 0;
 }
 
diff --git a/arch/x86/ia32/ia32_signal.c b/arch/x86/ia32/ia32_signal.c
index 20af4c79579a..f25a10124005 100644
--- a/arch/x86/ia32/ia32_signal.c
+++ b/arch/x86/ia32/ia32_signal.c
@@ -179,9 +179,10 @@ struct sigframe
 	u32 pretcode;
 	int sig;
 	struct sigcontext_ia32 sc;
-	struct _fpstate_ia32 fpstate;
+	struct _fpstate_ia32 fpstate_unused; /* look at kernel/sigframe.h */
 	unsigned int extramask[_COMPAT_NSIG_WORDS-1];
 	char retcode[8];
+	/* fp state follows here */
 };
 
 struct rt_sigframe
@@ -192,8 +193,8 @@ struct rt_sigframe
 	u32 puc;
 	compat_siginfo_t info;
 	struct ucontext_ia32 uc;
-	struct _fpstate_ia32 fpstate;
 	char retcode[8];
+	/* fp state follows here */
 };
 
 #define COPY(x)		{ 		\
@@ -215,7 +216,7 @@ static int ia32_restore_sigcontext(struct pt_regs *regs,
 				   unsigned int *peax)
 {
 	unsigned int tmpflags, gs, oldgs, err = 0;
-	struct _fpstate_ia32 __user *buf;
+	void __user *buf;
 	u32 tmp;
 
 	/* Always make any pending restarted system calls return -EINTR */
@@ -259,26 +260,12 @@ static int ia32_restore_sigcontext(struct pt_regs *regs,
 
 	err |= __get_user(tmp, &sc->fpstate);
 	buf = compat_ptr(tmp);
-	if (buf) {
-		if (!access_ok(VERIFY_READ, buf, sizeof(*buf)))
-			goto badframe;
-		err |= restore_i387_ia32(buf);
-	} else {
-		struct task_struct *me = current;
-
-		if (used_math()) {
-			clear_fpu(me);
-			clear_used_math();
-		}
-	}
+	err |= restore_i387_xstate_ia32(buf);
 
 	err |= __get_user(tmp, &sc->ax);
 	*peax = tmp;
 
 	return err;
-
-badframe:
-	return 1;
 }
 
 asmlinkage long sys32_sigreturn(struct pt_regs *regs)
@@ -350,7 +337,7 @@ badframe:
  */
 
 static int ia32_setup_sigcontext(struct sigcontext_ia32 __user *sc,
-				 struct _fpstate_ia32 __user *fpstate,
+				 void __user *fpstate,
 				 struct pt_regs *regs, unsigned int mask)
 {
 	int tmp, err = 0;
@@ -381,7 +368,7 @@ static int ia32_setup_sigcontext(struct sigcontext_ia32 __user *sc,
 	err |= __put_user((u32)regs->flags, &sc->flags);
 	err |= __put_user((u32)regs->sp, &sc->sp_at_signal);
 
-	tmp = save_i387_ia32(fpstate);
+	tmp = save_i387_xstate_ia32(fpstate);
 	if (tmp < 0)
 		err = -EFAULT;
 	else {
@@ -402,7 +389,8 @@ static int ia32_setup_sigcontext(struct sigcontext_ia32 __user *sc,
  * Determine which stack to use..
  */
 static void __user *get_sigframe(struct k_sigaction *ka, struct pt_regs *regs,
-				 size_t frame_size)
+				 size_t frame_size,
+				 void **fpstate)
 {
 	unsigned long sp;
 
@@ -421,6 +409,11 @@ static void __user *get_sigframe(struct k_sigaction *ka, struct pt_regs *regs,
 		 ka->sa.sa_restorer)
 		sp = (unsigned long) ka->sa.sa_restorer;
 
+	if (used_math()) {
+		sp = sp - sig_xstate_ia32_size;
+		*fpstate = (struct _fpstate_ia32 *) sp;
+	}
+
 	sp -= frame_size;
 	/* Align the stack pointer according to the i386 ABI,
 	 * i.e. so that on function entry ((sp + 4) & 15) == 0. */
@@ -434,6 +427,7 @@ int ia32_setup_frame(int sig, struct k_sigaction *ka,
 	struct sigframe __user *frame;
 	void __user *restorer;
 	int err = 0;
+	void __user *fpstate = NULL;
 
 	/* copy_to_user optimizes that into a single 8 byte store */
 	static const struct {
@@ -448,7 +442,7 @@ int ia32_setup_frame(int sig, struct k_sigaction *ka,
 		0,
 	};
 
-	frame = get_sigframe(ka, regs, sizeof(*frame));
+	frame = get_sigframe(ka, regs, sizeof(*frame), &fpstate);
 
 	if (!access_ok(VERIFY_WRITE, frame, sizeof(*frame)))
 		goto give_sigsegv;
@@ -457,8 +451,7 @@ int ia32_setup_frame(int sig, struct k_sigaction *ka,
 	if (err)
 		goto give_sigsegv;
 
-	err |= ia32_setup_sigcontext(&frame->sc, &frame->fpstate, regs,
-					set->sig[0]);
+	err |= ia32_setup_sigcontext(&frame->sc, fpstate, regs, set->sig[0]);
 	if (err)
 		goto give_sigsegv;
 
@@ -522,6 +515,7 @@ int ia32_setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t *info,
 	struct rt_sigframe __user *frame;
 	void __user *restorer;
 	int err = 0;
+	void __user *fpstate = NULL;
 
 	/* __copy_to_user optimizes that into a single 8 byte store */
 	static const struct {
@@ -537,7 +531,7 @@ int ia32_setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t *info,
 		0,
 	};
 
-	frame = get_sigframe(ka, regs, sizeof(*frame));
+	frame = get_sigframe(ka, regs, sizeof(*frame), &fpstate);
 
 	if (!access_ok(VERIFY_WRITE, frame, sizeof(*frame)))
 		goto give_sigsegv;
@@ -550,13 +544,16 @@ int ia32_setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t *info,
 		goto give_sigsegv;
 
 	/* Create the ucontext.  */
-	err |= __put_user(0, &frame->uc.uc_flags);
+	if (cpu_has_xsave)
+		err |= __put_user(UC_FP_XSTATE, &frame->uc.uc_flags);
+	else
+		err |= __put_user(0, &frame->uc.uc_flags);
 	err |= __put_user(0, &frame->uc.uc_link);
 	err |= __put_user(current->sas_ss_sp, &frame->uc.uc_stack.ss_sp);
 	err |= __put_user(sas_ss_flags(regs->sp),
 			  &frame->uc.uc_stack.ss_flags);
 	err |= __put_user(current->sas_ss_size, &frame->uc.uc_stack.ss_size);
-	err |= ia32_setup_sigcontext(&frame->uc.uc_mcontext, &frame->fpstate,
+	err |= ia32_setup_sigcontext(&frame->uc.uc_mcontext, fpstate,
 				     regs, set->sig[0]);
 	err |= __copy_to_user(&frame->uc.uc_sigmask, set, sizeof(*set));
 	if (err)
diff --git a/arch/x86/ia32/ia32entry.S b/arch/x86/ia32/ia32entry.S
index e4bd1793a5e4..ffc1bb4fed7d 100644
--- a/arch/x86/ia32/ia32entry.S
+++ b/arch/x86/ia32/ia32entry.S
@@ -201,7 +201,7 @@ sysexit_from_sys_call:
 	movl RDI-ARGOFFSET(%rsp),%r8d	/* reload 5th syscall arg */
 	.endm
 
-	.macro auditsys_exit exit
+	.macro auditsys_exit exit,ebpsave=RBP
 	testl $(_TIF_ALLWORK_MASK & ~_TIF_SYSCALL_AUDIT),TI_flags(%r10)
 	jnz int_ret_from_sys_call
 	TRACE_IRQS_ON
@@ -214,7 +214,7 @@ sysexit_from_sys_call:
 	call audit_syscall_exit
 	GET_THREAD_INFO(%r10)
 	movl RAX-ARGOFFSET(%rsp),%eax	/* reload syscall return value */
-	movl RBP-ARGOFFSET(%rsp),%ebp	/* reload user register value */
+	movl \ebpsave-ARGOFFSET(%rsp),%ebp /* reload user register value */
 	movl $(_TIF_ALLWORK_MASK & ~_TIF_SYSCALL_AUDIT),%edi
 	cli
 	TRACE_IRQS_OFF
@@ -347,7 +347,7 @@ cstar_auditsys:
 	jmp cstar_dispatch
 
 sysretl_audit:
-	auditsys_exit sysretl_from_sys_call
+	auditsys_exit sysretl_from_sys_call, RCX /* user %ebp in RCX slot */
 #endif
 
 cstar_tracesys:
diff --git a/arch/x86/kernel/Makefile b/arch/x86/kernel/Makefile
index 3db651fc8ec5..c9be69fedb70 100644
--- a/arch/x86/kernel/Makefile
+++ b/arch/x86/kernel/Makefile
@@ -38,7 +38,7 @@ obj-y			+= tsc.o io_delay.o rtc.o
 
 obj-$(CONFIG_X86_TRAMPOLINE)	+= trampoline.o
 obj-y				+= process.o
-obj-y				+= i387.o
+obj-y				+= i387.o xsave.o
 obj-y				+= ptrace.o
 obj-y				+= ds.o
 obj-$(CONFIG_X86_32)		+= tls.o
@@ -69,6 +69,7 @@ obj-$(CONFIG_KEXEC)		+= machine_kexec_$(BITS).o
 obj-$(CONFIG_KEXEC)		+= relocate_kernel_$(BITS).o crash.o
 obj-$(CONFIG_CRASH_DUMP)	+= crash_dump_$(BITS).o
 obj-$(CONFIG_X86_NUMAQ)		+= numaq_32.o
+obj-$(CONFIG_X86_ES7000)	+= es7000_32.o
 obj-$(CONFIG_X86_SUMMIT_NUMA)	+= summit_32.o
 obj-y				+= vsmp_64.o
 obj-$(CONFIG_KPROBES)		+= kprobes.o
@@ -104,6 +105,8 @@ obj-$(CONFIG_OLPC)		+= olpc.o
 ifeq ($(CONFIG_X86_64),y)
         obj-y				+= genapic_64.o genapic_flat_64.o genx2apic_uv_x.o tlb_uv.o
 	obj-y				+= bios_uv.o
+        obj-y				+= genx2apic_cluster.o
+        obj-y				+= genx2apic_phys.o
         obj-$(CONFIG_X86_PM_TIMER)	+= pmtimer_64.o
         obj-$(CONFIG_AUDIT)		+= audit_64.o
 
diff --git a/arch/x86/kernel/acpi/boot.c b/arch/x86/kernel/acpi/boot.c
index fa88a1d71290..27ef365e757d 100644
--- a/arch/x86/kernel/acpi/boot.c
+++ b/arch/x86/kernel/acpi/boot.c
@@ -97,6 +97,8 @@ static u64 acpi_lapic_addr __initdata = APIC_DEFAULT_PHYS_BASE;
 #warning ACPI uses CMPXCHG, i486 and later hardware
 #endif
 
+static int acpi_mcfg_64bit_base_addr __initdata = FALSE;
+
 /* --------------------------------------------------------------------------
                               Boot-time Configuration
    -------------------------------------------------------------------------- */
@@ -158,6 +160,14 @@ char *__init __acpi_map_table(unsigned long phys, unsigned long size)
 struct acpi_mcfg_allocation *pci_mmcfg_config;
 int pci_mmcfg_config_num;
 
+static int __init acpi_mcfg_oem_check(struct acpi_table_mcfg *mcfg)
+{
+	if (!strcmp(mcfg->header.oem_id, "SGI"))
+		acpi_mcfg_64bit_base_addr = TRUE;
+
+	return 0;
+}
+
 int __init acpi_parse_mcfg(struct acpi_table_header *header)
 {
 	struct acpi_table_mcfg *mcfg;
@@ -190,8 +200,12 @@ int __init acpi_parse_mcfg(struct acpi_table_header *header)
 	}
 
 	memcpy(pci_mmcfg_config, &mcfg[1], config_size);
+
+	acpi_mcfg_oem_check(mcfg);
+
 	for (i = 0; i < pci_mmcfg_config_num; ++i) {
-		if (pci_mmcfg_config[i].address > 0xFFFFFFFF) {
+		if ((pci_mmcfg_config[i].address > 0xFFFFFFFF) &&
+		    !acpi_mcfg_64bit_base_addr) {
 			printk(KERN_ERR PREFIX
 			       "MMCONFIG not in low 4GB of memory\n");
 			kfree(pci_mmcfg_config);
@@ -761,7 +775,7 @@ static void __init acpi_register_lapic_address(unsigned long address)
 
 	set_fixmap_nocache(FIX_APIC_BASE, address);
 	if (boot_cpu_physical_apicid == -1U) {
-		boot_cpu_physical_apicid  = GET_APIC_ID(read_apic_id());
+		boot_cpu_physical_apicid  = read_apic_id();
 #ifdef CONFIG_X86_32
 		apic_version[boot_cpu_physical_apicid] =
 			 GET_APIC_VERSION(apic_read(APIC_LVR));
@@ -1337,7 +1351,9 @@ static void __init acpi_process_madt(void)
 				acpi_ioapic = 1;
 
 				smp_found_config = 1;
+#ifdef CONFIG_X86_32
 				setup_apic_routing();
+#endif
 			}
 		}
 		if (error == -EINVAL) {
diff --git a/arch/x86/kernel/acpi/cstate.c b/arch/x86/kernel/acpi/cstate.c
index 9220cf46aa10..c2502eb9aa83 100644
--- a/arch/x86/kernel/acpi/cstate.c
+++ b/arch/x86/kernel/acpi/cstate.c
@@ -73,7 +73,6 @@ int acpi_processor_ffh_cstate_probe(unsigned int cpu,
 	struct cpuinfo_x86 *c = &cpu_data(cpu);
 
 	cpumask_t saved_mask;
-	cpumask_of_cpu_ptr(new_mask, cpu);
 	int retval;
 	unsigned int eax, ebx, ecx, edx;
 	unsigned int edx_part;
@@ -92,7 +91,7 @@ int acpi_processor_ffh_cstate_probe(unsigned int cpu,
 
 	/* Make sure we are running on right CPU */
 	saved_mask = current->cpus_allowed;
-	retval = set_cpus_allowed_ptr(current, new_mask);
+	retval = set_cpus_allowed_ptr(current, &cpumask_of_cpu(cpu));
 	if (retval)
 		return -1;
 
diff --git a/arch/x86/kernel/acpi/sleep.c b/arch/x86/kernel/acpi/sleep.c
index fa2161d5003b..426e5d91b63a 100644
--- a/arch/x86/kernel/acpi/sleep.c
+++ b/arch/x86/kernel/acpi/sleep.c
@@ -20,7 +20,7 @@ unsigned long acpi_realmode_flags;
 /* address in low memory of the wakeup routine. */
 static unsigned long acpi_realmode;
 
-#ifdef CONFIG_64BIT
+#if defined(CONFIG_SMP) && defined(CONFIG_64BIT)
 static char temp_stack[10240];
 #endif
 
@@ -86,7 +86,7 @@ int acpi_save_state_mem(void)
 #endif /* !CONFIG_64BIT */
 
 	header->pmode_cr0 = read_cr0();
-	header->pmode_cr4 = read_cr4();
+	header->pmode_cr4 = read_cr4_safe();
 	header->realmode_flags = acpi_realmode_flags;
 	header->real_magic = 0x12345678;
 
diff --git a/arch/x86/kernel/alternative.c b/arch/x86/kernel/alternative.c
index 2763cb37b553..65a0c1b48696 100644
--- a/arch/x86/kernel/alternative.c
+++ b/arch/x86/kernel/alternative.c
@@ -145,35 +145,25 @@ static const unsigned char *const p6_nops[ASM_NOP_MAX+1] = {
 extern char __vsyscall_0;
 const unsigned char *const *find_nop_table(void)
 {
-	return boot_cpu_data.x86_vendor != X86_VENDOR_INTEL ||
-	       boot_cpu_data.x86 < 6 ? k8_nops : p6_nops;
+	if (boot_cpu_data.x86_vendor == X86_VENDOR_INTEL &&
+	    boot_cpu_has(X86_FEATURE_NOPL))
+		return p6_nops;
+	else
+		return k8_nops;
 }
 
 #else /* CONFIG_X86_64 */
 
-static const struct nop {
-	int cpuid;
-	const unsigned char *const *noptable;
-} noptypes[] = {
-	{ X86_FEATURE_K8, k8_nops },
-	{ X86_FEATURE_K7, k7_nops },
-	{ X86_FEATURE_P4, p6_nops },
-	{ X86_FEATURE_P3, p6_nops },
-	{ -1, NULL }
-};
-
 const unsigned char *const *find_nop_table(void)
 {
-	const unsigned char *const *noptable = intel_nops;
-	int i;
-
-	for (i = 0; noptypes[i].cpuid >= 0; i++) {
-		if (boot_cpu_has(noptypes[i].cpuid)) {
-			noptable = noptypes[i].noptable;
-			break;
-		}
-	}
-	return noptable;
+	if (boot_cpu_has(X86_FEATURE_K8))
+		return k8_nops;
+	else if (boot_cpu_has(X86_FEATURE_K7))
+		return k7_nops;
+	else if (boot_cpu_has(X86_FEATURE_NOPL))
+		return p6_nops;
+	else
+		return intel_nops;
 }
 
 #endif /* CONFIG_X86_64 */
diff --git a/arch/x86/kernel/amd_iommu.c b/arch/x86/kernel/amd_iommu.c
index c25210e6ac88..69b4d060b21c 100644
--- a/arch/x86/kernel/amd_iommu.c
+++ b/arch/x86/kernel/amd_iommu.c
@@ -29,9 +29,6 @@
 
 #define CMD_SET_TYPE(cmd, t) ((cmd)->data[1] |= ((t) << 28))
 
-#define to_pages(addr, size) \
-	 (round_up(((addr) & ~PAGE_MASK) + (size), PAGE_SIZE) >> PAGE_SHIFT)
-
 #define EXIT_LOOP_COUNT 10000000
 
 static DEFINE_RWLOCK(amd_iommu_devtable_lock);
@@ -68,7 +65,7 @@ static int __iommu_queue_command(struct amd_iommu *iommu, struct iommu_cmd *cmd)
 	u8 *target;
 
 	tail = readl(iommu->mmio_base + MMIO_CMD_TAIL_OFFSET);
-	target = (iommu->cmd_buf + tail);
+	target = iommu->cmd_buf + tail;
 	memcpy_toio(target, cmd, sizeof(*cmd));
 	tail = (tail + sizeof(*cmd)) % iommu->cmd_buf_size;
 	head = readl(iommu->mmio_base + MMIO_CMD_HEAD_OFFSET);
@@ -104,16 +101,13 @@ static int iommu_queue_command(struct amd_iommu *iommu, struct iommu_cmd *cmd)
  */
 static int iommu_completion_wait(struct amd_iommu *iommu)
 {
-	int ret;
+	int ret, ready = 0;
+	unsigned status = 0;
 	struct iommu_cmd cmd;
-	volatile u64 ready = 0;
-	unsigned long ready_phys = virt_to_phys(&ready);
 	unsigned long i = 0;
 
 	memset(&cmd, 0, sizeof(cmd));
-	cmd.data[0] = LOW_U32(ready_phys) | CMD_COMPL_WAIT_STORE_MASK;
-	cmd.data[1] = upper_32_bits(ready_phys);
-	cmd.data[2] = 1; /* value written to 'ready' */
+	cmd.data[0] = CMD_COMPL_WAIT_INT_MASK;
 	CMD_SET_TYPE(&cmd, CMD_COMPL_WAIT);
 
 	iommu->need_sync = 0;
@@ -125,9 +119,15 @@ static int iommu_completion_wait(struct amd_iommu *iommu)
 
 	while (!ready && (i < EXIT_LOOP_COUNT)) {
 		++i;
-		cpu_relax();
+		/* wait for the bit to become one */
+		status = readl(iommu->mmio_base + MMIO_STATUS_OFFSET);
+		ready = status & MMIO_STATUS_COM_WAIT_INT_MASK;
 	}
 
+	/* set bit back to zero */
+	status &= ~MMIO_STATUS_COM_WAIT_INT_MASK;
+	writel(status, iommu->mmio_base + MMIO_STATUS_OFFSET);
+
 	if (unlikely((i == EXIT_LOOP_COUNT) && printk_ratelimit()))
 		printk(KERN_WARNING "AMD IOMMU: Completion wait loop failed\n");
 
@@ -164,7 +164,7 @@ static int iommu_queue_inv_iommu_pages(struct amd_iommu *iommu,
 	address &= PAGE_MASK;
 	CMD_SET_TYPE(&cmd, CMD_INV_IOMMU_PAGES);
 	cmd.data[1] |= domid;
-	cmd.data[2] = LOW_U32(address);
+	cmd.data[2] = lower_32_bits(address);
 	cmd.data[3] = upper_32_bits(address);
 	if (s) /* size bit - we flush more than one 4kb page */
 		cmd.data[2] |= CMD_INV_IOMMU_PAGES_SIZE_MASK;
@@ -185,7 +185,7 @@ static int iommu_flush_pages(struct amd_iommu *iommu, u16 domid,
 		u64 address, size_t size)
 {
 	int s = 0;
-	unsigned pages = to_pages(address, size);
+	unsigned pages = iommu_num_pages(address, size);
 
 	address &= PAGE_MASK;
 
@@ -557,8 +557,8 @@ static struct dma_ops_domain *dma_ops_domain_alloc(struct amd_iommu *iommu,
 	if (iommu->exclusion_start &&
 	    iommu->exclusion_start < dma_dom->aperture_size) {
 		unsigned long startpage = iommu->exclusion_start >> PAGE_SHIFT;
-		int pages = to_pages(iommu->exclusion_start,
-				iommu->exclusion_length);
+		int pages = iommu_num_pages(iommu->exclusion_start,
+					    iommu->exclusion_length);
 		dma_ops_reserve_addresses(dma_dom, startpage, pages);
 	}
 
@@ -667,7 +667,7 @@ static int get_device_resources(struct device *dev,
 	_bdf = calc_devid(pcidev->bus->number, pcidev->devfn);
 
 	/* device not translated by any IOMMU in the system? */
-	if (_bdf >= amd_iommu_last_bdf) {
+	if (_bdf > amd_iommu_last_bdf) {
 		*iommu = NULL;
 		*domain = NULL;
 		*bdf = 0xffff;
@@ -767,7 +767,7 @@ static dma_addr_t __map_single(struct device *dev,
 	unsigned int pages;
 	int i;
 
-	pages = to_pages(paddr, size);
+	pages = iommu_num_pages(paddr, size);
 	paddr &= PAGE_MASK;
 
 	address = dma_ops_alloc_addresses(dev, dma_dom, pages);
@@ -802,7 +802,7 @@ static void __unmap_single(struct amd_iommu *iommu,
 	if ((dma_addr == 0) || (dma_addr + size > dma_dom->aperture_size))
 		return;
 
-	pages = to_pages(dma_addr, size);
+	pages = iommu_num_pages(dma_addr, size);
 	dma_addr &= PAGE_MASK;
 	start = dma_addr;
 
@@ -1085,7 +1085,7 @@ void prealloc_protection_domains(void)
 
 	while ((dev = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, dev)) != NULL) {
 		devid = (dev->bus->number << 8) | dev->devfn;
-		if (devid >= amd_iommu_last_bdf)
+		if (devid > amd_iommu_last_bdf)
 			continue;
 		devid = amd_iommu_alias_table[devid];
 		if (domain_for_device(devid))
diff --git a/arch/x86/kernel/amd_iommu_init.c b/arch/x86/kernel/amd_iommu_init.c
index c9d8ff2eb130..a69cc0f52042 100644
--- a/arch/x86/kernel/amd_iommu_init.c
+++ b/arch/x86/kernel/amd_iommu_init.c
@@ -732,7 +732,7 @@ static int __init init_exclusion_range(struct ivmd_header *m)
 		set_device_exclusion_range(m->devid, m);
 		break;
 	case ACPI_IVMD_TYPE_ALL:
-		for (i = 0; i < amd_iommu_last_bdf; ++i)
+		for (i = 0; i <= amd_iommu_last_bdf; ++i)
 			set_device_exclusion_range(i, m);
 		break;
 	case ACPI_IVMD_TYPE_RANGE:
@@ -801,6 +801,21 @@ static int __init init_memory_definitions(struct acpi_table_header *table)
 }
 
 /*
+ * Init the device table to not allow DMA access for devices and
+ * suppress all page faults
+ */
+static void init_device_table(void)
+{
+	u16 devid;
+
+	for (devid = 0; devid <= amd_iommu_last_bdf; ++devid) {
+		set_dev_entry_bit(devid, DEV_ENTRY_VALID);
+		set_dev_entry_bit(devid, DEV_ENTRY_TRANSLATION);
+		set_dev_entry_bit(devid, DEV_ENTRY_NO_PAGE_FAULT);
+	}
+}
+
+/*
  * This function finally enables all IOMMUs found in the system after
  * they have been initialized
  */
@@ -931,10 +946,13 @@ int __init amd_iommu_init(void)
 	if (amd_iommu_pd_alloc_bitmap == NULL)
 		goto free;
 
+	/* init the device table */
+	init_device_table();
+
 	/*
 	 * let all alias entries point to itself
 	 */
-	for (i = 0; i < amd_iommu_last_bdf; ++i)
+	for (i = 0; i <= amd_iommu_last_bdf; ++i)
 		amd_iommu_alias_table[i] = i;
 
 	/*
@@ -954,15 +972,15 @@ int __init amd_iommu_init(void)
 	if (acpi_table_parse("IVRS", init_memory_definitions) != 0)
 		goto free;
 
-	ret = amd_iommu_init_dma_ops();
+	ret = sysdev_class_register(&amd_iommu_sysdev_class);
 	if (ret)
 		goto free;
 
-	ret = sysdev_class_register(&amd_iommu_sysdev_class);
+	ret = sysdev_register(&device_amd_iommu);
 	if (ret)
 		goto free;
 
-	ret = sysdev_register(&device_amd_iommu);
+	ret = amd_iommu_init_dma_ops();
 	if (ret)
 		goto free;
 
diff --git a/arch/x86/kernel/apic_32.c b/arch/x86/kernel/apic_32.c
index d6c898358371..584272105051 100644
--- a/arch/x86/kernel/apic_32.c
+++ b/arch/x86/kernel/apic_32.c
@@ -145,13 +145,18 @@ static int modern_apic(void)
 	return lapic_get_version() >= 0x14;
 }
 
-void apic_wait_icr_idle(void)
+/*
+ * Paravirt kernels also might be using these below ops. So we still
+ * use generic apic_read()/apic_write(), which might be pointing to different
+ * ops in PARAVIRT case.
+ */
+void xapic_wait_icr_idle(void)
 {
 	while (apic_read(APIC_ICR) & APIC_ICR_BUSY)
 		cpu_relax();
 }
 
-u32 safe_apic_wait_icr_idle(void)
+u32 safe_xapic_wait_icr_idle(void)
 {
 	u32 send_status;
 	int timeout;
@@ -167,16 +172,48 @@ u32 safe_apic_wait_icr_idle(void)
 	return send_status;
 }
 
+void xapic_icr_write(u32 low, u32 id)
+{
+	apic_write(APIC_ICR2, SET_APIC_DEST_FIELD(id));
+	apic_write(APIC_ICR, low);
+}
+
+u64 xapic_icr_read(void)
+{
+	u32 icr1, icr2;
+
+	icr2 = apic_read(APIC_ICR2);
+	icr1 = apic_read(APIC_ICR);
+
+	return icr1 | ((u64)icr2 << 32);
+}
+
+static struct apic_ops xapic_ops = {
+	.read = native_apic_mem_read,
+	.write = native_apic_mem_write,
+	.icr_read = xapic_icr_read,
+	.icr_write = xapic_icr_write,
+	.wait_icr_idle = xapic_wait_icr_idle,
+	.safe_wait_icr_idle = safe_xapic_wait_icr_idle,
+};
+
+struct apic_ops __read_mostly *apic_ops = &xapic_ops;
+EXPORT_SYMBOL_GPL(apic_ops);
+
 /**
  * enable_NMI_through_LVT0 - enable NMI through local vector table 0
  */
 void __cpuinit enable_NMI_through_LVT0(void)
 {
-	unsigned int v = APIC_DM_NMI;
+	unsigned int v;
+
+	/* unmask and set to NMI */
+	v = APIC_DM_NMI;
 
-	/* Level triggered for 82489DX */
+	/* Level triggered for 82489DX (32bit mode) */
 	if (!lapic_is_integrated())
 		v |= APIC_LVT_LEVEL_TRIGGER;
+
 	apic_write(APIC_LVT0, v);
 }
 
@@ -193,9 +230,13 @@ int get_physical_broadcast(void)
  */
 int lapic_get_maxlvt(void)
 {
-	unsigned int v = apic_read(APIC_LVR);
+	unsigned int v;
 
-	/* 82489DXs do not report # of LVT entries. */
+	v = apic_read(APIC_LVR);
+	/*
+	 * - we always have APIC integrated on 64bit mode
+	 * - 82489DXs do not report # of LVT entries
+	 */
 	return APIC_INTEGRATED(GET_APIC_VERSION(v)) ? GET_APIC_MAXLVT(v) : 2;
 }
 
@@ -1205,7 +1246,7 @@ void __init init_apic_mappings(void)
 	 * default configuration (or the MP table is broken).
 	 */
 	if (boot_cpu_physical_apicid == -1U)
-		boot_cpu_physical_apicid = GET_APIC_ID(read_apic_id());
+		boot_cpu_physical_apicid = read_apic_id();
 
 }
 
@@ -1242,7 +1283,7 @@ int __init APIC_init_uniprocessor(void)
 	 * might be zero if read from MP tables. Get it from LAPIC.
 	 */
 #ifdef CONFIG_CRASH_DUMP
-	boot_cpu_physical_apicid = GET_APIC_ID(read_apic_id());
+	boot_cpu_physical_apicid = read_apic_id();
 #endif
 	physid_set_mask_of_physid(boot_cpu_physical_apicid, &phys_cpu_present_map);
 
@@ -1321,54 +1362,6 @@ void smp_error_interrupt(struct pt_regs *regs)
 	irq_exit();
 }
 
-#ifdef CONFIG_SMP
-void __init smp_intr_init(void)
-{
-	/*
-	 * IRQ0 must be given a fixed assignment and initialized,
-	 * because it's used before the IO-APIC is set up.
-	 */
-	set_intr_gate(FIRST_DEVICE_VECTOR, interrupt[0]);
-
-	/*
-	 * The reschedule interrupt is a CPU-to-CPU reschedule-helper
-	 * IPI, driven by wakeup.
-	 */
-	alloc_intr_gate(RESCHEDULE_VECTOR, reschedule_interrupt);
-
-	/* IPI for invalidation */
-	alloc_intr_gate(INVALIDATE_TLB_VECTOR, invalidate_interrupt);
-
-	/* IPI for generic function call */
-	alloc_intr_gate(CALL_FUNCTION_VECTOR, call_function_interrupt);
-
-	/* IPI for single call function */
-	set_intr_gate(CALL_FUNCTION_SINGLE_VECTOR,
-				call_function_single_interrupt);
-}
-#endif
-
-/*
- * Initialize APIC interrupts
- */
-void __init apic_intr_init(void)
-{
-#ifdef CONFIG_SMP
-	smp_intr_init();
-#endif
-	/* self generated IPI for local APIC timer */
-	alloc_intr_gate(LOCAL_TIMER_VECTOR, apic_timer_interrupt);
-
-	/* IPI vectors for APIC spurious and error interrupts */
-	alloc_intr_gate(SPURIOUS_APIC_VECTOR, spurious_interrupt);
-	alloc_intr_gate(ERROR_APIC_VECTOR, error_interrupt);
-
-	/* thermal monitor LVT interrupt */
-#ifdef CONFIG_X86_MCE_P4THERMAL
-	alloc_intr_gate(THERMAL_APIC_VECTOR, thermal_interrupt);
-#endif
-}
-
 /**
  * connect_bsp_APIC - attach the APIC to the interrupt system
  */
@@ -1454,8 +1447,6 @@ void disconnect_bsp_APIC(int virt_wire_setup)
 	}
 }
 
-unsigned int __cpuinitdata maxcpus = NR_CPUS;
-
 void __cpuinit generic_processor_info(int apicid, int version)
 {
 	int cpu;
@@ -1482,12 +1473,6 @@ void __cpuinit generic_processor_info(int apicid, int version)
 		return;
 	}
 
-	if (num_processors >= maxcpus) {
-		printk(KERN_WARNING "WARNING: maxcpus limit of %i reached."
-			" Processor ignored.\n", maxcpus);
-		return;
-	}
-
 	num_processors++;
 	cpus_complement(tmp_map, cpu_present_map);
 	cpu = first_cpu(tmp_map);
@@ -1720,15 +1705,19 @@ static int __init parse_lapic_timer_c2_ok(char *arg)
 }
 early_param("lapic_timer_c2_ok", parse_lapic_timer_c2_ok);
 
-static int __init apic_set_verbosity(char *str)
+static int __init apic_set_verbosity(char *arg)
 {
-	if (strcmp("debug", str) == 0)
+	if (!arg)
+		return -EINVAL;
+
+	if (strcmp(arg, "debug") == 0)
 		apic_verbosity = APIC_DEBUG;
-	else if (strcmp("verbose", str) == 0)
+	else if (strcmp(arg, "verbose") == 0)
 		apic_verbosity = APIC_VERBOSE;
-	return 1;
+
+	return 0;
 }
-__setup("apic=", apic_set_verbosity);
+early_param("apic", apic_set_verbosity);
 
 static int __init lapic_insert_resource(void)
 {
diff --git a/arch/x86/kernel/apic_64.c b/arch/x86/kernel/apic_64.c
index 7f1f030da7ee..1a6011855af3 100644
--- a/arch/x86/kernel/apic_64.c
+++ b/arch/x86/kernel/apic_64.c
@@ -27,6 +27,7 @@
 #include <linux/clockchips.h>
 #include <linux/acpi_pmtmr.h>
 #include <linux/module.h>
+#include <linux/dmar.h>
 
 #include <asm/atomic.h>
 #include <asm/smp.h>
@@ -39,6 +40,7 @@
 #include <asm/proto.h>
 #include <asm/timex.h>
 #include <asm/apic.h>
+#include <asm/i8259.h>
 
 #include <mach_ipi.h>
 #include <mach_apic.h>
@@ -46,6 +48,11 @@
 static int disable_apic_timer __cpuinitdata;
 static int apic_calibrate_pmtmr __initdata;
 int disable_apic;
+int disable_x2apic;
+int x2apic;
+
+/* x2apic enabled before OS handover */
+int x2apic_preenabled;
 
 /* Local APIC timer works in C2 */
 int local_apic_timer_c2_ok;
@@ -90,7 +97,6 @@ static unsigned long apic_phys;
 
 unsigned long mp_lapic_addr;
 
-unsigned int __cpuinitdata maxcpus = NR_CPUS;
 /*
  * Get the LAPIC version
  */
@@ -119,13 +125,13 @@ static int modern_apic(void)
 	return lapic_get_version() >= 0x14;
 }
 
-void apic_wait_icr_idle(void)
+void xapic_wait_icr_idle(void)
 {
 	while (apic_read(APIC_ICR) & APIC_ICR_BUSY)
 		cpu_relax();
 }
 
-u32 safe_apic_wait_icr_idle(void)
+u32 safe_xapic_wait_icr_idle(void)
 {
 	u32 send_status;
 	int timeout;
@@ -141,6 +147,69 @@ u32 safe_apic_wait_icr_idle(void)
 	return send_status;
 }
 
+void xapic_icr_write(u32 low, u32 id)
+{
+	apic_write(APIC_ICR2, id << 24);
+	apic_write(APIC_ICR, low);
+}
+
+u64 xapic_icr_read(void)
+{
+	u32 icr1, icr2;
+
+	icr2 = apic_read(APIC_ICR2);
+	icr1 = apic_read(APIC_ICR);
+
+	return (icr1 | ((u64)icr2 << 32));
+}
+
+static struct apic_ops xapic_ops = {
+	.read = native_apic_mem_read,
+	.write = native_apic_mem_write,
+	.icr_read = xapic_icr_read,
+	.icr_write = xapic_icr_write,
+	.wait_icr_idle = xapic_wait_icr_idle,
+	.safe_wait_icr_idle = safe_xapic_wait_icr_idle,
+};
+
+struct apic_ops __read_mostly *apic_ops = &xapic_ops;
+
+EXPORT_SYMBOL_GPL(apic_ops);
+
+static void x2apic_wait_icr_idle(void)
+{
+	/* no need to wait for icr idle in x2apic */
+	return;
+}
+
+static u32 safe_x2apic_wait_icr_idle(void)
+{
+	/* no need to wait for icr idle in x2apic */
+	return 0;
+}
+
+void x2apic_icr_write(u32 low, u32 id)
+{
+	wrmsrl(APIC_BASE_MSR + (APIC_ICR >> 4), ((__u64) id) << 32 | low);
+}
+
+u64 x2apic_icr_read(void)
+{
+	unsigned long val;
+
+	rdmsrl(APIC_BASE_MSR + (APIC_ICR >> 4), val);
+	return val;
+}
+
+static struct apic_ops x2apic_ops = {
+	.read = native_apic_msr_read,
+	.write = native_apic_msr_write,
+	.icr_read = x2apic_icr_read,
+	.icr_write = x2apic_icr_write,
+	.wait_icr_idle = x2apic_wait_icr_idle,
+	.safe_wait_icr_idle = safe_x2apic_wait_icr_idle,
+};
+
 /**
  * enable_NMI_through_LVT0 - enable NMI through local vector table 0
  */
@@ -150,6 +219,11 @@ void __cpuinit enable_NMI_through_LVT0(void)
 
 	/* unmask and set to NMI */
 	v = APIC_DM_NMI;
+
+	/* Level triggered for 82489DX (32bit mode) */
+	if (!lapic_is_integrated())
+		v |= APIC_LVT_LEVEL_TRIGGER;
+
 	apic_write(APIC_LVT0, v);
 }
 
@@ -158,11 +232,14 @@ void __cpuinit enable_NMI_through_LVT0(void)
  */
 int lapic_get_maxlvt(void)
 {
-	unsigned int v, maxlvt;
+	unsigned int v;
 
 	v = apic_read(APIC_LVR);
-	maxlvt = GET_APIC_MAXLVT(v);
-	return maxlvt;
+	/*
+	 * - we always have APIC integrated on 64bit mode
+	 * - 82489DXs do not report # of LVT entries
+	 */
+	return APIC_INTEGRATED(GET_APIC_VERSION(v)) ? GET_APIC_MAXLVT(v) : 2;
 }
 
 /*
@@ -630,10 +707,10 @@ int __init verify_local_APIC(void)
 	/*
 	 * The ID register is read/write in a real APIC.
 	 */
-	reg0 = read_apic_id();
+	reg0 = apic_read(APIC_ID);
 	apic_printk(APIC_DEBUG, "Getting ID: %x\n", reg0);
 	apic_write(APIC_ID, reg0 ^ APIC_ID_MASK);
-	reg1 = read_apic_id();
+	reg1 = apic_read(APIC_ID);
 	apic_printk(APIC_DEBUG, "Getting ID: %x\n", reg1);
 	apic_write(APIC_ID, reg0);
 	if (reg1 != (reg0 ^ APIC_ID_MASK))
@@ -834,6 +911,125 @@ void __cpuinit end_local_APIC_setup(void)
 	apic_pm_activate();
 }
 
+void check_x2apic(void)
+{
+	int msr, msr2;
+
+	rdmsr(MSR_IA32_APICBASE, msr, msr2);
+
+	if (msr & X2APIC_ENABLE) {
+		printk("x2apic enabled by BIOS, switching to x2apic ops\n");
+		x2apic_preenabled = x2apic = 1;
+		apic_ops = &x2apic_ops;
+	}
+}
+
+void enable_x2apic(void)
+{
+	int msr, msr2;
+
+	rdmsr(MSR_IA32_APICBASE, msr, msr2);
+	if (!(msr & X2APIC_ENABLE)) {
+		printk("Enabling x2apic\n");
+		wrmsr(MSR_IA32_APICBASE, msr | X2APIC_ENABLE, 0);
+	}
+}
+
+void enable_IR_x2apic(void)
+{
+#ifdef CONFIG_INTR_REMAP
+	int ret;
+	unsigned long flags;
+
+	if (!cpu_has_x2apic)
+		return;
+
+	if (!x2apic_preenabled && disable_x2apic) {
+		printk(KERN_INFO
+		       "Skipped enabling x2apic and Interrupt-remapping "
+		       "because of nox2apic\n");
+		return;
+	}
+
+	if (x2apic_preenabled && disable_x2apic)
+		panic("Bios already enabled x2apic, can't enforce nox2apic");
+
+	if (!x2apic_preenabled && skip_ioapic_setup) {
+		printk(KERN_INFO
+		       "Skipped enabling x2apic and Interrupt-remapping "
+		       "because of skipping io-apic setup\n");
+		return;
+	}
+
+	ret = dmar_table_init();
+	if (ret) {
+		printk(KERN_INFO
+		       "dmar_table_init() failed with %d:\n", ret);
+
+		if (x2apic_preenabled)
+			panic("x2apic enabled by bios. But IR enabling failed");
+		else
+			printk(KERN_INFO
+			       "Not enabling x2apic,Intr-remapping\n");
+		return;
+	}
+
+	local_irq_save(flags);
+	mask_8259A();
+	save_mask_IO_APIC_setup();
+
+	ret = enable_intr_remapping(1);
+
+	if (ret && x2apic_preenabled) {
+		local_irq_restore(flags);
+		panic("x2apic enabled by bios. But IR enabling failed");
+	}
+
+	if (ret)
+		goto end;
+
+	if (!x2apic) {
+		x2apic = 1;
+		apic_ops = &x2apic_ops;
+		enable_x2apic();
+	}
+end:
+	if (ret)
+		/*
+		 * IR enabling failed
+		 */
+		restore_IO_APIC_setup();
+	else
+		reinit_intr_remapped_IO_APIC(x2apic_preenabled);
+
+	unmask_8259A();
+	local_irq_restore(flags);
+
+	if (!ret) {
+		if (!x2apic_preenabled)
+			printk(KERN_INFO
+			       "Enabled x2apic and interrupt-remapping\n");
+		else
+			printk(KERN_INFO
+			       "Enabled Interrupt-remapping\n");
+	} else
+		printk(KERN_ERR
+		       "Failed to enable Interrupt-remapping and x2apic\n");
+#else
+	if (!cpu_has_x2apic)
+		return;
+
+	if (x2apic_preenabled)
+		panic("x2apic enabled prior OS handover,"
+		      " enable CONFIG_INTR_REMAP");
+
+	printk(KERN_INFO "Enable CONFIG_INTR_REMAP for enabling intr-remapping "
+	       " and x2apic\n");
+#endif
+
+	return;
+}
+
 /*
  * Detect and enable local APICs on non-SMP boards.
  * Original code written by Keir Fraser.
@@ -873,7 +1069,7 @@ void __init early_init_lapic_mapping(void)
 	 * Fetch the APIC ID of the BSP in case we have a
 	 * default configuration (or the MP table is broken).
 	 */
-	boot_cpu_physical_apicid = GET_APIC_ID(read_apic_id());
+	boot_cpu_physical_apicid = read_apic_id();
 }
 
 /**
@@ -881,6 +1077,11 @@ void __init early_init_lapic_mapping(void)
  */
 void __init init_apic_mappings(void)
 {
+	if (x2apic) {
+		boot_cpu_physical_apicid = read_apic_id();
+		return;
+	}
+
 	/*
 	 * If no local APIC can be found then set up a fake all
 	 * zeroes page to simulate the local APIC and another
@@ -900,7 +1101,7 @@ void __init init_apic_mappings(void)
 	 * Fetch the APIC ID of the BSP in case we have a
 	 * default configuration (or the MP table is broken).
 	 */
-	boot_cpu_physical_apicid = GET_APIC_ID(read_apic_id());
+	boot_cpu_physical_apicid = read_apic_id();
 }
 
 /*
@@ -919,6 +1120,9 @@ int __init APIC_init_uniprocessor(void)
 		return -1;
 	}
 
+	enable_IR_x2apic();
+	setup_apic_routing();
+
 	verify_local_APIC();
 
 	connect_bsp_APIC();
@@ -1062,12 +1266,6 @@ void __cpuinit generic_processor_info(int apicid, int version)
 		return;
 	}
 
-	if (num_processors >= maxcpus) {
-		printk(KERN_WARNING "WARNING: maxcpus limit of %i reached."
-		       " Processor ignored.\n", maxcpus);
-		return;
-	}
-
 	num_processors++;
 	cpus_complement(tmp_map, cpu_present_map);
 	cpu = first_cpu(tmp_map);
@@ -1100,6 +1298,11 @@ void __cpuinit generic_processor_info(int apicid, int version)
 	cpu_set(cpu, cpu_present_map);
 }
 
+int hard_smp_processor_id(void)
+{
+	return read_apic_id();
+}
+
 /*
  * Power management
  */
@@ -1136,7 +1339,7 @@ static int lapic_suspend(struct sys_device *dev, pm_message_t state)
 
 	maxlvt = lapic_get_maxlvt();
 
-	apic_pm_state.apic_id = read_apic_id();
+	apic_pm_state.apic_id = apic_read(APIC_ID);
 	apic_pm_state.apic_taskpri = apic_read(APIC_TASKPRI);
 	apic_pm_state.apic_ldr = apic_read(APIC_LDR);
 	apic_pm_state.apic_dfr = apic_read(APIC_DFR);
@@ -1171,10 +1374,14 @@ static int lapic_resume(struct sys_device *dev)
 	maxlvt = lapic_get_maxlvt();
 
 	local_irq_save(flags);
-	rdmsr(MSR_IA32_APICBASE, l, h);
-	l &= ~MSR_IA32_APICBASE_BASE;
-	l |= MSR_IA32_APICBASE_ENABLE | mp_lapic_addr;
-	wrmsr(MSR_IA32_APICBASE, l, h);
+	if (!x2apic) {
+		rdmsr(MSR_IA32_APICBASE, l, h);
+		l &= ~MSR_IA32_APICBASE_BASE;
+		l |= MSR_IA32_APICBASE_ENABLE | mp_lapic_addr;
+		wrmsr(MSR_IA32_APICBASE, l, h);
+	} else
+		enable_x2apic();
+
 	apic_write(APIC_LVTERR, ERROR_APIC_VECTOR | APIC_LVT_MASKED);
 	apic_write(APIC_ID, apic_pm_state.apic_id);
 	apic_write(APIC_DFR, apic_pm_state.apic_dfr);
@@ -1314,6 +1521,15 @@ __cpuinit int apic_is_clustered_box(void)
 	return (clusters > 2);
 }
 
+static __init int setup_nox2apic(char *str)
+{
+	disable_x2apic = 1;
+	clear_cpu_cap(&boot_cpu_data, X86_FEATURE_X2APIC);
+	return 0;
+}
+early_param("nox2apic", setup_nox2apic);
+
+
 /*
  * APIC command line parameters
  */
diff --git a/arch/x86/kernel/asm-offsets_64.c b/arch/x86/kernel/asm-offsets_64.c
index aa89387006fe..505543a75a56 100644
--- a/arch/x86/kernel/asm-offsets_64.c
+++ b/arch/x86/kernel/asm-offsets_64.c
@@ -22,7 +22,7 @@
 
 #define __NO_STUBS 1
 #undef __SYSCALL
-#undef _ASM_X86_64_UNISTD_H_
+#undef ASM_X86__UNISTD_64_H
 #define __SYSCALL(nr, sym) [nr] = 1,
 static char syscalls[] = {
 #include <asm/unistd.h>
diff --git a/arch/x86/kernel/cpu/Makefile b/arch/x86/kernel/cpu/Makefile
index ee76eaad3001..510d1bcb058a 100644
--- a/arch/x86/kernel/cpu/Makefile
+++ b/arch/x86/kernel/cpu/Makefile
@@ -3,22 +3,31 @@
 #
 
 obj-y			:= intel_cacheinfo.o addon_cpuid_features.o
-obj-y			+= proc.o feature_names.o
-
-obj-$(CONFIG_X86_32)	+= common.o bugs.o
-obj-$(CONFIG_X86_64)	+= common_64.o bugs_64.o
-obj-$(CONFIG_X86_32)	+= amd.o
-obj-$(CONFIG_X86_64)	+= amd_64.o
-obj-$(CONFIG_X86_32)	+= cyrix.o
-obj-$(CONFIG_X86_32)	+= centaur.o
-obj-$(CONFIG_X86_64)	+= centaur_64.o
-obj-$(CONFIG_X86_32)	+= transmeta.o
-obj-$(CONFIG_X86_32)	+= intel.o
-obj-$(CONFIG_X86_64)	+= intel_64.o
-obj-$(CONFIG_X86_32)	+= umc.o
+obj-y			+= proc.o capflags.o powerflags.o common.o
+
+obj-$(CONFIG_X86_32)	+= bugs.o cmpxchg.o
+obj-$(CONFIG_X86_64)	+= bugs_64.o
+
+obj-$(CONFIG_CPU_SUP_INTEL_32)		+= intel.o
+obj-$(CONFIG_CPU_SUP_INTEL_64)		+= intel_64.o
+obj-$(CONFIG_CPU_SUP_AMD)		+= amd.o
+obj-$(CONFIG_CPU_SUP_CYRIX_32)		+= cyrix.o
+obj-$(CONFIG_CPU_SUP_CENTAUR_32)	+= centaur.o
+obj-$(CONFIG_CPU_SUP_CENTAUR_64)	+= centaur_64.o
+obj-$(CONFIG_CPU_SUP_TRANSMETA_32)	+= transmeta.o
+obj-$(CONFIG_CPU_SUP_UMC_32)		+= umc.o
 
 obj-$(CONFIG_X86_MCE)	+= mcheck/
 obj-$(CONFIG_MTRR)	+= mtrr/
 obj-$(CONFIG_CPU_FREQ)	+= cpufreq/
 
 obj-$(CONFIG_X86_LOCAL_APIC) += perfctr-watchdog.o
+
+quiet_cmd_mkcapflags = MKCAP   $@
+      cmd_mkcapflags = $(PERL) $(srctree)/$(src)/mkcapflags.pl $< $@
+
+cpufeature = $(src)/../../../../include/asm-x86/cpufeature.h
+
+targets += capflags.c
+$(obj)/capflags.c: $(cpufeature) $(src)/mkcapflags.pl FORCE
+	$(call if_changed,mkcapflags)
diff --git a/arch/x86/kernel/cpu/addon_cpuid_features.c b/arch/x86/kernel/cpu/addon_cpuid_features.c
index 84a8220a6072..0d9c993aa93e 100644
--- a/arch/x86/kernel/cpu/addon_cpuid_features.c
+++ b/arch/x86/kernel/cpu/addon_cpuid_features.c
@@ -7,6 +7,8 @@
 #include <asm/pat.h>
 #include <asm/processor.h>
 
+#include <mach_apic.h>
+
 struct cpuid_bit {
 	u16 feature;
 	u8 reg;
@@ -48,6 +50,92 @@ void __cpuinit init_scattered_cpuid_features(struct cpuinfo_x86 *c)
 	}
 }
 
+/* leaf 0xb SMT level */
+#define SMT_LEVEL	0
+
+/* leaf 0xb sub-leaf types */
+#define INVALID_TYPE	0
+#define SMT_TYPE	1
+#define CORE_TYPE	2
+
+#define LEAFB_SUBTYPE(ecx)		(((ecx) >> 8) & 0xff)
+#define BITS_SHIFT_NEXT_LEVEL(eax)	((eax) & 0x1f)
+#define LEVEL_MAX_SIBLINGS(ebx)		((ebx) & 0xffff)
+
+/*
+ * Check for extended topology enumeration cpuid leaf 0xb and if it
+ * exists, use it for populating initial_apicid and cpu topology
+ * detection.
+ */
+void __cpuinit detect_extended_topology(struct cpuinfo_x86 *c)
+{
+#ifdef CONFIG_SMP
+	unsigned int eax, ebx, ecx, edx, sub_index;
+	unsigned int ht_mask_width, core_plus_mask_width;
+	unsigned int core_select_mask, core_level_siblings;
+
+	if (c->cpuid_level < 0xb)
+		return;
+
+	cpuid_count(0xb, SMT_LEVEL, &eax, &ebx, &ecx, &edx);
+
+	/*
+	 * check if the cpuid leaf 0xb is actually implemented.
+	 */
+	if (ebx == 0 || (LEAFB_SUBTYPE(ecx) != SMT_TYPE))
+		return;
+
+	set_cpu_cap(c, X86_FEATURE_XTOPOLOGY);
+
+	/*
+	 * initial apic id, which also represents 32-bit extended x2apic id.
+	 */
+	c->initial_apicid = edx;
+
+	/*
+	 * Populate HT related information from sub-leaf level 0.
+	 */
+	core_level_siblings = smp_num_siblings = LEVEL_MAX_SIBLINGS(ebx);
+	core_plus_mask_width = ht_mask_width = BITS_SHIFT_NEXT_LEVEL(eax);
+
+	sub_index = 1;
+	do {
+		cpuid_count(0xb, sub_index, &eax, &ebx, &ecx, &edx);
+
+		/*
+		 * Check for the Core type in the implemented sub leaves.
+		 */
+		if (LEAFB_SUBTYPE(ecx) == CORE_TYPE) {
+			core_level_siblings = LEVEL_MAX_SIBLINGS(ebx);
+			core_plus_mask_width = BITS_SHIFT_NEXT_LEVEL(eax);
+			break;
+		}
+
+		sub_index++;
+	} while (LEAFB_SUBTYPE(ecx) != INVALID_TYPE);
+
+	core_select_mask = (~(-1 << core_plus_mask_width)) >> ht_mask_width;
+
+#ifdef CONFIG_X86_32
+	c->cpu_core_id = phys_pkg_id(c->initial_apicid, ht_mask_width)
+						 & core_select_mask;
+	c->phys_proc_id = phys_pkg_id(c->initial_apicid, core_plus_mask_width);
+#else
+	c->cpu_core_id = phys_pkg_id(ht_mask_width) & core_select_mask;
+	c->phys_proc_id = phys_pkg_id(core_plus_mask_width);
+#endif
+	c->x86_max_cores = (core_level_siblings / smp_num_siblings);
+
+
+	printk(KERN_INFO  "CPU: Physical Processor ID: %d\n",
+	       c->phys_proc_id);
+	if (c->x86_max_cores > 1)
+		printk(KERN_INFO  "CPU: Processor Core ID: %d\n",
+		       c->cpu_core_id);
+	return;
+#endif
+}
+
 #ifdef CONFIG_X86_PAT
 void __cpuinit validate_pat_support(struct cpuinfo_x86 *c)
 {
@@ -56,9 +144,22 @@ void __cpuinit validate_pat_support(struct cpuinfo_x86 *c)
 
 	switch (c->x86_vendor) {
 	case X86_VENDOR_INTEL:
-		if (c->x86 == 0xF || (c->x86 == 6 && c->x86_model >= 15))
+		/*
+		 * There is a known erratum on Pentium III and Core Solo
+		 * and Core Duo CPUs.
+		 * " Page with PAT set to WC while associated MTRR is UC
+		 *   may consolidate to UC "
+		 * Because of this erratum, it is better to stick with
+		 * setting WC in MTRR rather than using PAT on these CPUs.
+		 *
+		 * Enable PAT WC only on P4, Core 2 or later CPUs.
+		 */
+		if (c->x86 > 0x6 || (c->x86 == 6 && c->x86_model >= 15))
 			return;
-		break;
+
+		pat_disable("PAT WC disabled due to known CPU erratum.");
+		return;
+
 	case X86_VENDOR_AMD:
 	case X86_VENDOR_CENTAUR:
 	case X86_VENDOR_TRANSMETA:
diff --git a/arch/x86/kernel/cpu/amd.c b/arch/x86/kernel/cpu/amd.c
index cae9cabc3031..32e73520adf7 100644
--- a/arch/x86/kernel/cpu/amd.c
+++ b/arch/x86/kernel/cpu/amd.c
@@ -1,13 +1,22 @@
 #include <linux/init.h>
 #include <linux/bitops.h>
 #include <linux/mm.h>
+
 #include <asm/io.h>
 #include <asm/processor.h>
 #include <asm/apic.h>
 
+#ifdef CONFIG_X86_64
+# include <asm/numa_64.h>
+# include <asm/mmconfig.h>
+# include <asm/cacheflush.h>
+#endif
+
 #include <mach_apic.h>
+
 #include "cpu.h"
 
+#ifdef CONFIG_X86_32
 /*
  *	B step AMD K6 before B 9730xxxx have hardware bugs that can cause
  *	misexecution of code under Linux. Owners of such processors should
@@ -24,21 +33,273 @@
 extern void vide(void);
 __asm__(".align 4\nvide: ret");
 
-static void __cpuinit early_init_amd(struct cpuinfo_x86 *c)
+static void __cpuinit init_amd_k5(struct cpuinfo_x86 *c)
 {
-	if (cpuid_eax(0x80000000) >= 0x80000007) {
-		c->x86_power = cpuid_edx(0x80000007);
-		if (c->x86_power & (1<<8))
-			set_cpu_cap(c, X86_FEATURE_CONSTANT_TSC);
+/*
+ * General Systems BIOSen alias the cpu frequency registers
+ * of the Elan at 0x000df000. Unfortuantly, one of the Linux
+ * drivers subsequently pokes it, and changes the CPU speed.
+ * Workaround : Remove the unneeded alias.
+ */
+#define CBAR		(0xfffc) /* Configuration Base Address  (32-bit) */
+#define CBAR_ENB	(0x80000000)
+#define CBAR_KEY	(0X000000CB)
+	if (c->x86_model == 9 || c->x86_model == 10) {
+		if (inl (CBAR) & CBAR_ENB)
+			outl (0 | CBAR_KEY, CBAR);
 	}
 }
 
-static void __cpuinit init_amd(struct cpuinfo_x86 *c)
+
+static void __cpuinit init_amd_k6(struct cpuinfo_x86 *c)
 {
 	u32 l, h;
 	int mbytes = num_physpages >> (20-PAGE_SHIFT);
-	int r;
 
+	if (c->x86_model < 6) {
+		/* Based on AMD doc 20734R - June 2000 */
+		if (c->x86_model == 0) {
+			clear_cpu_cap(c, X86_FEATURE_APIC);
+			set_cpu_cap(c, X86_FEATURE_PGE);
+		}
+		return;
+	}
+
+	if (c->x86_model == 6 && c->x86_mask == 1) {
+		const int K6_BUG_LOOP = 1000000;
+		int n;
+		void (*f_vide)(void);
+		unsigned long d, d2;
+
+		printk(KERN_INFO "AMD K6 stepping B detected - ");
+
+		/*
+		 * It looks like AMD fixed the 2.6.2 bug and improved indirect
+		 * calls at the same time.
+		 */
+
+		n = K6_BUG_LOOP;
+		f_vide = vide;
+		rdtscl(d);
+		while (n--)
+			f_vide();
+		rdtscl(d2);
+		d = d2-d;
+
+		if (d > 20*K6_BUG_LOOP)
+			printk("system stability may be impaired when more than 32 MB are used.\n");
+		else
+			printk("probably OK (after B9730xxxx).\n");
+		printk(KERN_INFO "Please see http://membres.lycos.fr/poulot/k6bug.html\n");
+	}
+
+	/* K6 with old style WHCR */
+	if (c->x86_model < 8 ||
+	   (c->x86_model == 8 && c->x86_mask < 8)) {
+		/* We can only write allocate on the low 508Mb */
+		if (mbytes > 508)
+			mbytes = 508;
+
+		rdmsr(MSR_K6_WHCR, l, h);
+		if ((l&0x0000FFFF) == 0) {
+			unsigned long flags;
+			l = (1<<0)|((mbytes/4)<<1);
+			local_irq_save(flags);
+			wbinvd();
+			wrmsr(MSR_K6_WHCR, l, h);
+			local_irq_restore(flags);
+			printk(KERN_INFO "Enabling old style K6 write allocation for %d Mb\n",
+				mbytes);
+		}
+		return;
+	}
+
+	if ((c->x86_model == 8 && c->x86_mask > 7) ||
+	     c->x86_model == 9 || c->x86_model == 13) {
+		/* The more serious chips .. */
+
+		if (mbytes > 4092)
+			mbytes = 4092;
+
+		rdmsr(MSR_K6_WHCR, l, h);
+		if ((l&0xFFFF0000) == 0) {
+			unsigned long flags;
+			l = ((mbytes>>2)<<22)|(1<<16);
+			local_irq_save(flags);
+			wbinvd();
+			wrmsr(MSR_K6_WHCR, l, h);
+			local_irq_restore(flags);
+			printk(KERN_INFO "Enabling new style K6 write allocation for %d Mb\n",
+				mbytes);
+		}
+
+		return;
+	}
+
+	if (c->x86_model == 10) {
+		/* AMD Geode LX is model 10 */
+		/* placeholder for any needed mods */
+		return;
+	}
+}
+
+static void __cpuinit init_amd_k7(struct cpuinfo_x86 *c)
+{
+	u32 l, h;
+
+	/*
+	 * Bit 15 of Athlon specific MSR 15, needs to be 0
+	 * to enable SSE on Palomino/Morgan/Barton CPU's.
+	 * If the BIOS didn't enable it already, enable it here.
+	 */
+	if (c->x86_model >= 6 && c->x86_model <= 10) {
+		if (!cpu_has(c, X86_FEATURE_XMM)) {
+			printk(KERN_INFO "Enabling disabled K7/SSE Support.\n");
+			rdmsr(MSR_K7_HWCR, l, h);
+			l &= ~0x00008000;
+			wrmsr(MSR_K7_HWCR, l, h);
+			set_cpu_cap(c, X86_FEATURE_XMM);
+		}
+	}
+
+	/*
+	 * It's been determined by AMD that Athlons since model 8 stepping 1
+	 * are more robust with CLK_CTL set to 200xxxxx instead of 600xxxxx
+	 * As per AMD technical note 27212 0.2
+	 */
+	if ((c->x86_model == 8 && c->x86_mask >= 1) || (c->x86_model > 8)) {
+		rdmsr(MSR_K7_CLK_CTL, l, h);
+		if ((l & 0xfff00000) != 0x20000000) {
+			printk ("CPU: CLK_CTL MSR was %x. Reprogramming to %x\n", l,
+				((l & 0x000fffff)|0x20000000));
+			wrmsr(MSR_K7_CLK_CTL, (l & 0x000fffff)|0x20000000, h);
+		}
+	}
+
+	set_cpu_cap(c, X86_FEATURE_K7);
+}
+#endif
+
+#if defined(CONFIG_NUMA) && defined(CONFIG_X86_64)
+static int __cpuinit nearby_node(int apicid)
+{
+	int i, node;
+
+	for (i = apicid - 1; i >= 0; i--) {
+		node = apicid_to_node[i];
+		if (node != NUMA_NO_NODE && node_online(node))
+			return node;
+	}
+	for (i = apicid + 1; i < MAX_LOCAL_APIC; i++) {
+		node = apicid_to_node[i];
+		if (node != NUMA_NO_NODE && node_online(node))
+			return node;
+	}
+	return first_node(node_online_map); /* Shouldn't happen */
+}
+#endif
+
+/*
+ * On a AMD dual core setup the lower bits of the APIC id distingush the cores.
+ * Assumes number of cores is a power of two.
+ */
+static void __cpuinit amd_detect_cmp(struct cpuinfo_x86 *c)
+{
+#ifdef CONFIG_X86_HT
+	unsigned bits;
+
+	bits = c->x86_coreid_bits;
+
+	/* Low order bits define the core id (index of core in socket) */
+	c->cpu_core_id = c->initial_apicid & ((1 << bits)-1);
+	/* Convert the initial APIC ID into the socket ID */
+	c->phys_proc_id = c->initial_apicid >> bits;
+#endif
+}
+
+static void __cpuinit srat_detect_node(struct cpuinfo_x86 *c)
+{
+#if defined(CONFIG_NUMA) && defined(CONFIG_X86_64)
+	int cpu = smp_processor_id();
+	int node;
+	unsigned apicid = hard_smp_processor_id();
+
+	node = c->phys_proc_id;
+	if (apicid_to_node[apicid] != NUMA_NO_NODE)
+		node = apicid_to_node[apicid];
+	if (!node_online(node)) {
+		/* Two possibilities here:
+		   - The CPU is missing memory and no node was created.
+		   In that case try picking one from a nearby CPU
+		   - The APIC IDs differ from the HyperTransport node IDs
+		   which the K8 northbridge parsing fills in.
+		   Assume they are all increased by a constant offset,
+		   but in the same order as the HT nodeids.
+		   If that doesn't result in a usable node fall back to the
+		   path for the previous case.  */
+
+		int ht_nodeid = c->initial_apicid;
+
+		if (ht_nodeid >= 0 &&
+		    apicid_to_node[ht_nodeid] != NUMA_NO_NODE)
+			node = apicid_to_node[ht_nodeid];
+		/* Pick a nearby node */
+		if (!node_online(node))
+			node = nearby_node(apicid);
+	}
+	numa_set_node(cpu, node);
+
+	printk(KERN_INFO "CPU %d/%x -> Node %d\n", cpu, apicid, node);
+#endif
+}
+
+static void __cpuinit early_init_amd_mc(struct cpuinfo_x86 *c)
+{
+#ifdef CONFIG_X86_HT
+	unsigned bits, ecx;
+
+	/* Multi core CPU? */
+	if (c->extended_cpuid_level < 0x80000008)
+		return;
+
+	ecx = cpuid_ecx(0x80000008);
+
+	c->x86_max_cores = (ecx & 0xff) + 1;
+
+	/* CPU telling us the core id bits shift? */
+	bits = (ecx >> 12) & 0xF;
+
+	/* Otherwise recompute */
+	if (bits == 0) {
+		while ((1 << bits) < c->x86_max_cores)
+			bits++;
+	}
+
+	c->x86_coreid_bits = bits;
+#endif
+}
+
+static void __cpuinit early_init_amd(struct cpuinfo_x86 *c)
+{
+	early_init_amd_mc(c);
+
+	/* c->x86_power is 8000_0007 edx. Bit 8 is constant TSC */
+	if (c->x86_power & (1<<8))
+		set_cpu_cap(c, X86_FEATURE_CONSTANT_TSC);
+
+#ifdef CONFIG_X86_64
+	set_cpu_cap(c, X86_FEATURE_SYSCALL32);
+#else
+	/*  Set MTRR capability flag if appropriate */
+	if (c->x86 == 5)
+		if (c->x86_model == 13 || c->x86_model == 9 ||
+		    (c->x86_model == 8 && c->x86_mask >= 8))
+			set_cpu_cap(c, X86_FEATURE_K6_MTRR);
+#endif
+}
+
+static void __cpuinit init_amd(struct cpuinfo_x86 *c)
+{
 #ifdef CONFIG_SMP
 	unsigned long long value;
 
@@ -49,7 +310,7 @@ static void __cpuinit init_amd(struct cpuinfo_x86 *c)
 	 * Errata 63 for SH-B3 steppings
 	 * Errata 122 for all steppings (F+ have it disabled by default)
 	 */
-	if (c->x86 == 15) {
+	if (c->x86 == 0xf) {
 		rdmsrl(MSR_K7_HWCR, value);
 		value |= 1 << 6;
 		wrmsrl(MSR_K7_HWCR, value);
@@ -59,213 +320,119 @@ static void __cpuinit init_amd(struct cpuinfo_x86 *c)
 	early_init_amd(c);
 
 	/*
-	 *	FIXME: We should handle the K5 here. Set up the write
-	 *	range and also turn on MSR 83 bits 4 and 31 (write alloc,
-	 *	no bus pipeline)
-	 */
-
-	/*
 	 * Bit 31 in normal CPUID used for nonstandard 3DNow ID;
 	 * 3DNow is IDd by bit 31 in extended CPUID (1*32+31) anyway
 	 */
 	clear_cpu_cap(c, 0*32+31);
 
-	r = get_model_name(c);
+#ifdef CONFIG_X86_64
+	/* On C+ stepping K8 rep microcode works well for copy/memset */
+	if (c->x86 == 0xf) {
+		u32 level;
 
-	switch (c->x86) {
-	case 4:
-		/*
-		 * General Systems BIOSen alias the cpu frequency registers
-		 * of the Elan at 0x000df000. Unfortuantly, one of the Linux
-		 * drivers subsequently pokes it, and changes the CPU speed.
-		 * Workaround : Remove the unneeded alias.
-		 */
-#define CBAR		(0xfffc) /* Configuration Base Address  (32-bit) */
-#define CBAR_ENB	(0x80000000)
-#define CBAR_KEY	(0X000000CB)
-			if (c->x86_model == 9 || c->x86_model == 10) {
-				if (inl (CBAR) & CBAR_ENB)
-					outl (0 | CBAR_KEY, CBAR);
-			}
-			break;
-	case 5:
-			if (c->x86_model < 6) {
-				/* Based on AMD doc 20734R - June 2000 */
-				if (c->x86_model == 0) {
-					clear_cpu_cap(c, X86_FEATURE_APIC);
-					set_cpu_cap(c, X86_FEATURE_PGE);
-				}
-				break;
-			}
-
-			if (c->x86_model == 6 && c->x86_mask == 1) {
-				const int K6_BUG_LOOP = 1000000;
-				int n;
-				void (*f_vide)(void);
-				unsigned long d, d2;
-
-				printk(KERN_INFO "AMD K6 stepping B detected - ");
-
-				/*
-				 * It looks like AMD fixed the 2.6.2 bug and improved indirect
-				 * calls at the same time.
-				 */
-
-				n = K6_BUG_LOOP;
-				f_vide = vide;
-				rdtscl(d);
-				while (n--)
-					f_vide();
-				rdtscl(d2);
-				d = d2-d;
-
-				if (d > 20*K6_BUG_LOOP)
-					printk("system stability may be impaired when more than 32 MB are used.\n");
-				else
-					printk("probably OK (after B9730xxxx).\n");
-				printk(KERN_INFO "Please see http://membres.lycos.fr/poulot/k6bug.html\n");
-			}
-
-			/* K6 with old style WHCR */
-			if (c->x86_model < 8 ||
-			   (c->x86_model == 8 && c->x86_mask < 8)) {
-				/* We can only write allocate on the low 508Mb */
-				if (mbytes > 508)
-					mbytes = 508;
-
-				rdmsr(MSR_K6_WHCR, l, h);
-				if ((l&0x0000FFFF) == 0) {
-					unsigned long flags;
-					l = (1<<0)|((mbytes/4)<<1);
-					local_irq_save(flags);
-					wbinvd();
-					wrmsr(MSR_K6_WHCR, l, h);
-					local_irq_restore(flags);
-					printk(KERN_INFO "Enabling old style K6 write allocation for %d Mb\n",
-						mbytes);
-				}
-				break;
-			}
-
-			if ((c->x86_model == 8 && c->x86_mask > 7) ||
-			     c->x86_model == 9 || c->x86_model == 13) {
-				/* The more serious chips .. */
-
-				if (mbytes > 4092)
-					mbytes = 4092;
-
-				rdmsr(MSR_K6_WHCR, l, h);
-				if ((l&0xFFFF0000) == 0) {
-					unsigned long flags;
-					l = ((mbytes>>2)<<22)|(1<<16);
-					local_irq_save(flags);
-					wbinvd();
-					wrmsr(MSR_K6_WHCR, l, h);
-					local_irq_restore(flags);
-					printk(KERN_INFO "Enabling new style K6 write allocation for %d Mb\n",
-						mbytes);
-				}
-
-				/*  Set MTRR capability flag if appropriate */
-				if (c->x86_model == 13 || c->x86_model == 9 ||
-				   (c->x86_model == 8 && c->x86_mask >= 8))
-					set_cpu_cap(c, X86_FEATURE_K6_MTRR);
-				break;
-			}
-
-			if (c->x86_model == 10) {
-				/* AMD Geode LX is model 10 */
-				/* placeholder for any needed mods */
-				break;
-			}
-			break;
-	case 6: /* An Athlon/Duron */
-
-			/*
-			 * Bit 15 of Athlon specific MSR 15, needs to be 0
-			 * to enable SSE on Palomino/Morgan/Barton CPU's.
-			 * If the BIOS didn't enable it already, enable it here.
-			 */
-			if (c->x86_model >= 6 && c->x86_model <= 10) {
-				if (!cpu_has(c, X86_FEATURE_XMM)) {
-					printk(KERN_INFO "Enabling disabled K7/SSE Support.\n");
-					rdmsr(MSR_K7_HWCR, l, h);
-					l &= ~0x00008000;
-					wrmsr(MSR_K7_HWCR, l, h);
-					set_cpu_cap(c, X86_FEATURE_XMM);
-				}
-			}
-
-			/*
-			 * It's been determined by AMD that Athlons since model 8 stepping 1
-			 * are more robust with CLK_CTL set to 200xxxxx instead of 600xxxxx
-			 * As per AMD technical note 27212 0.2
-			 */
-			if ((c->x86_model == 8 && c->x86_mask >= 1) || (c->x86_model > 8)) {
-				rdmsr(MSR_K7_CLK_CTL, l, h);
-				if ((l & 0xfff00000) != 0x20000000) {
-					printk ("CPU: CLK_CTL MSR was %x. Reprogramming to %x\n", l,
-						((l & 0x000fffff)|0x20000000));
-					wrmsr(MSR_K7_CLK_CTL, (l & 0x000fffff)|0x20000000, h);
-				}
-			}
-			break;
+		level = cpuid_eax(1);
+		if((level >= 0x0f48 && level < 0x0f50) || level >= 0x0f58)
+			set_cpu_cap(c, X86_FEATURE_REP_GOOD);
 	}
+	if (c->x86 == 0x10 || c->x86 == 0x11)
+		set_cpu_cap(c, X86_FEATURE_REP_GOOD);
+#else
+
+	/*
+	 *	FIXME: We should handle the K5 here. Set up the write
+	 *	range and also turn on MSR 83 bits 4 and 31 (write alloc,
+	 *	no bus pipeline)
+	 */
 
 	switch (c->x86) {
-	case 15:
-	/* Use K8 tuning for Fam10h and Fam11h */
-	case 0x10:
-	case 0x11:
-		set_cpu_cap(c, X86_FEATURE_K8);
+	case 4:
+		init_amd_k5(c);
 		break;
-	case 6:
-		set_cpu_cap(c, X86_FEATURE_K7);
+	case 5:
+		init_amd_k6(c);
+		break;
+	case 6: /* An Athlon/Duron */
+		init_amd_k7(c);
 		break;
 	}
+
+	/* K6s reports MCEs but don't actually have all the MSRs */
+	if (c->x86 < 6)
+		clear_cpu_cap(c, X86_FEATURE_MCE);
+#endif
+
+	/* Enable workaround for FXSAVE leak */
 	if (c->x86 >= 6)
 		set_cpu_cap(c, X86_FEATURE_FXSAVE_LEAK);
 
-	display_cacheinfo(c);
-
-	if (cpuid_eax(0x80000000) >= 0x80000008)
-		c->x86_max_cores = (cpuid_ecx(0x80000008) & 0xff) + 1;
+	if (!c->x86_model_id[0]) {
+		switch (c->x86) {
+		case 0xf:
+			/* Should distinguish Models here, but this is only
+			   a fallback anyways. */
+			strcpy(c->x86_model_id, "Hammer");
+			break;
+		}
+	}
 
-#ifdef CONFIG_X86_HT
-	/*
-	 * On a AMD multi core setup the lower bits of the APIC id
-	 * distinguish the cores.
-	 */
-	if (c->x86_max_cores > 1) {
-		int cpu = smp_processor_id();
-		unsigned bits = (cpuid_ecx(0x80000008) >> 12) & 0xf;
+	display_cacheinfo(c);
 
-		if (bits == 0) {
-			while ((1 << bits) < c->x86_max_cores)
-				bits++;
-		}
-		c->cpu_core_id = c->phys_proc_id & ((1<<bits)-1);
-		c->phys_proc_id >>= bits;
-		printk(KERN_INFO "CPU %d(%d) -> Core %d\n",
-		       cpu, c->x86_max_cores, c->cpu_core_id);
+	/* Multi core CPU? */
+	if (c->extended_cpuid_level >= 0x80000008) {
+		amd_detect_cmp(c);
+		srat_detect_node(c);
 	}
+
+#ifdef CONFIG_X86_32
+	detect_ht(c);
 #endif
 
-	if (cpuid_eax(0x80000000) >= 0x80000006) {
-		if ((c->x86 == 0x10) && (cpuid_edx(0x80000006) & 0xf000))
+	if (c->extended_cpuid_level >= 0x80000006) {
+		if ((c->x86 >= 0x0f) && (cpuid_edx(0x80000006) & 0xf000))
 			num_cache_leaves = 4;
 		else
 			num_cache_leaves = 3;
 	}
 
-	/* K6s reports MCEs but don't actually have all the MSRs */
-	if (c->x86 < 6)
-		clear_cpu_cap(c, X86_FEATURE_MCE);
+	if (c->x86 >= 0xf && c->x86 <= 0x11)
+		set_cpu_cap(c, X86_FEATURE_K8);
 
-	if (cpu_has_xmm2)
+	if (cpu_has_xmm2) {
+		/* MFENCE stops RDTSC speculation */
 		set_cpu_cap(c, X86_FEATURE_MFENCE_RDTSC);
+	}
+
+#ifdef CONFIG_X86_64
+	if (c->x86 == 0x10) {
+		/* do this for boot cpu */
+		if (c == &boot_cpu_data)
+			check_enable_amd_mmconf_dmi();
+
+		fam10h_check_enable_mmcfg();
+	}
+
+	if (c == &boot_cpu_data && c->x86 >= 0xf && c->x86 <= 0x11) {
+		unsigned long long tseg;
+
+		/*
+		 * Split up direct mapping around the TSEG SMM area.
+		 * Don't do it for gbpages because there seems very little
+		 * benefit in doing so.
+		 */
+		if (!rdmsrl_safe(MSR_K8_TSEG_ADDR, &tseg)) {
+		    printk(KERN_DEBUG "tseg: %010llx\n", tseg);
+		    if ((tseg>>PMD_SHIFT) <
+				(max_low_pfn_mapped>>(PMD_SHIFT-PAGE_SHIFT)) ||
+			((tseg>>PMD_SHIFT) <
+				(max_pfn_mapped>>(PMD_SHIFT-PAGE_SHIFT)) &&
+			 (tseg>>PMD_SHIFT) >= (1ULL<<(32 - PMD_SHIFT))))
+			set_memory_4k((unsigned long)__va(tseg), 1);
+		}
+	}
+#endif
 }
 
+#ifdef CONFIG_X86_32
 static unsigned int __cpuinit amd_size_cache(struct cpuinfo_x86 *c, unsigned int size)
 {
 	/* AMD errata T13 (order #21922) */
@@ -278,10 +445,12 @@ static unsigned int __cpuinit amd_size_cache(struct cpuinfo_x86 *c, unsigned int
 	}
 	return size;
 }
+#endif
 
 static struct cpu_dev amd_cpu_dev __cpuinitdata = {
 	.c_vendor	= "AMD",
 	.c_ident	= { "AuthenticAMD" },
+#ifdef CONFIG_X86_32
 	.c_models = {
 		{ .vendor = X86_VENDOR_AMD, .family = 4, .model_names =
 		  {
@@ -294,9 +463,11 @@ static struct cpu_dev amd_cpu_dev __cpuinitdata = {
 		  }
 		},
 	},
+	.c_size_cache	= amd_size_cache,
+#endif
 	.c_early_init   = early_init_amd,
 	.c_init		= init_amd,
-	.c_size_cache	= amd_size_cache,
+	.c_x86_vendor	= X86_VENDOR_AMD,
 };
 
-cpu_vendor_dev_register(X86_VENDOR_AMD, &amd_cpu_dev);
+cpu_dev_register(amd_cpu_dev);
diff --git a/arch/x86/kernel/cpu/amd_64.c b/arch/x86/kernel/cpu/amd_64.c
deleted file mode 100644
index d1692b2a41ff..000000000000
--- a/arch/x86/kernel/cpu/amd_64.c
+++ /dev/null
@@ -1,224 +0,0 @@
-#include <linux/init.h>
-#include <linux/mm.h>
-
-#include <asm/numa_64.h>
-#include <asm/mmconfig.h>
-#include <asm/cacheflush.h>
-
-#include <mach_apic.h>
-
-#include "cpu.h"
-
-int force_mwait __cpuinitdata;
-
-#ifdef CONFIG_NUMA
-static int __cpuinit nearby_node(int apicid)
-{
-	int i, node;
-
-	for (i = apicid - 1; i >= 0; i--) {
-		node = apicid_to_node[i];
-		if (node != NUMA_NO_NODE && node_online(node))
-			return node;
-	}
-	for (i = apicid + 1; i < MAX_LOCAL_APIC; i++) {
-		node = apicid_to_node[i];
-		if (node != NUMA_NO_NODE && node_online(node))
-			return node;
-	}
-	return first_node(node_online_map); /* Shouldn't happen */
-}
-#endif
-
-/*
- * On a AMD dual core setup the lower bits of the APIC id distingush the cores.
- * Assumes number of cores is a power of two.
- */
-static void __cpuinit amd_detect_cmp(struct cpuinfo_x86 *c)
-{
-#ifdef CONFIG_SMP
-	unsigned bits;
-#ifdef CONFIG_NUMA
-	int cpu = smp_processor_id();
-	int node = 0;
-	unsigned apicid = hard_smp_processor_id();
-#endif
-	bits = c->x86_coreid_bits;
-
-	/* Low order bits define the core id (index of core in socket) */
-	c->cpu_core_id = c->initial_apicid & ((1 << bits)-1);
-	/* Convert the initial APIC ID into the socket ID */
-	c->phys_proc_id = c->initial_apicid >> bits;
-
-#ifdef CONFIG_NUMA
-	node = c->phys_proc_id;
-	if (apicid_to_node[apicid] != NUMA_NO_NODE)
-		node = apicid_to_node[apicid];
-	if (!node_online(node)) {
-		/* Two possibilities here:
-		   - The CPU is missing memory and no node was created.
-		   In that case try picking one from a nearby CPU
-		   - The APIC IDs differ from the HyperTransport node IDs
-		   which the K8 northbridge parsing fills in.
-		   Assume they are all increased by a constant offset,
-		   but in the same order as the HT nodeids.
-		   If that doesn't result in a usable node fall back to the
-		   path for the previous case.  */
-
-		int ht_nodeid = c->initial_apicid;
-
-		if (ht_nodeid >= 0 &&
-		    apicid_to_node[ht_nodeid] != NUMA_NO_NODE)
-			node = apicid_to_node[ht_nodeid];
-		/* Pick a nearby node */
-		if (!node_online(node))
-			node = nearby_node(apicid);
-	}
-	numa_set_node(cpu, node);
-
-	printk(KERN_INFO "CPU %d/%x -> Node %d\n", cpu, apicid, node);
-#endif
-#endif
-}
-
-static void __cpuinit early_init_amd_mc(struct cpuinfo_x86 *c)
-{
-#ifdef CONFIG_SMP
-	unsigned bits, ecx;
-
-	/* Multi core CPU? */
-	if (c->extended_cpuid_level < 0x80000008)
-		return;
-
-	ecx = cpuid_ecx(0x80000008);
-
-	c->x86_max_cores = (ecx & 0xff) + 1;
-
-	/* CPU telling us the core id bits shift? */
-	bits = (ecx >> 12) & 0xF;
-
-	/* Otherwise recompute */
-	if (bits == 0) {
-		while ((1 << bits) < c->x86_max_cores)
-			bits++;
-	}
-
-	c->x86_coreid_bits = bits;
-
-#endif
-}
-
-static void __cpuinit early_init_amd(struct cpuinfo_x86 *c)
-{
-	early_init_amd_mc(c);
-
-	/* c->x86_power is 8000_0007 edx. Bit 8 is constant TSC */
-	if (c->x86_power & (1<<8))
-		set_cpu_cap(c, X86_FEATURE_CONSTANT_TSC);
-
-	set_cpu_cap(c, X86_FEATURE_SYSCALL32);
-}
-
-static void __cpuinit init_amd(struct cpuinfo_x86 *c)
-{
-	unsigned level;
-
-#ifdef CONFIG_SMP
-	unsigned long value;
-
-	/*
-	 * Disable TLB flush filter by setting HWCR.FFDIS on K8
-	 * bit 6 of msr C001_0015
-	 *
-	 * Errata 63 for SH-B3 steppings
-	 * Errata 122 for all steppings (F+ have it disabled by default)
-	 */
-	if (c->x86 == 0xf) {
-		rdmsrl(MSR_K8_HWCR, value);
-		value |= 1 << 6;
-		wrmsrl(MSR_K8_HWCR, value);
-	}
-#endif
-
-	/* Bit 31 in normal CPUID used for nonstandard 3DNow ID;
-	   3DNow is IDd by bit 31 in extended CPUID (1*32+31) anyway */
-	clear_cpu_cap(c, 0*32+31);
-
-	/* On C+ stepping K8 rep microcode works well for copy/memset */
-	if (c->x86 == 0xf) {
-		level = cpuid_eax(1);
-		if((level >= 0x0f48 && level < 0x0f50) || level >= 0x0f58)
-			set_cpu_cap(c, X86_FEATURE_REP_GOOD);
-	}
-	if (c->x86 == 0x10 || c->x86 == 0x11)
-		set_cpu_cap(c, X86_FEATURE_REP_GOOD);
-
-	/* Enable workaround for FXSAVE leak */
-	if (c->x86 >= 6)
-		set_cpu_cap(c, X86_FEATURE_FXSAVE_LEAK);
-
-	level = get_model_name(c);
-	if (!level) {
-		switch (c->x86) {
-		case 0xf:
-			/* Should distinguish Models here, but this is only
-			   a fallback anyways. */
-			strcpy(c->x86_model_id, "Hammer");
-			break;
-		}
-	}
-	display_cacheinfo(c);
-
-	/* Multi core CPU? */
-	if (c->extended_cpuid_level >= 0x80000008)
-		amd_detect_cmp(c);
-
-	if (c->extended_cpuid_level >= 0x80000006 &&
-		(cpuid_edx(0x80000006) & 0xf000))
-		num_cache_leaves = 4;
-	else
-		num_cache_leaves = 3;
-
-	if (c->x86 >= 0xf && c->x86 <= 0x11)
-		set_cpu_cap(c, X86_FEATURE_K8);
-
-	/* MFENCE stops RDTSC speculation */
-	set_cpu_cap(c, X86_FEATURE_MFENCE_RDTSC);
-
-	if (c->x86 == 0x10) {
-		/* do this for boot cpu */
-		if (c == &boot_cpu_data)
-			check_enable_amd_mmconf_dmi();
-
-		fam10h_check_enable_mmcfg();
-	}
-
-	if (c == &boot_cpu_data && c->x86 >= 0xf && c->x86 <= 0x11) {
-		unsigned long long tseg;
-
-		/*
-		 * Split up direct mapping around the TSEG SMM area.
-		 * Don't do it for gbpages because there seems very little
-		 * benefit in doing so.
-		 */
-		if (!rdmsrl_safe(MSR_K8_TSEG_ADDR, &tseg)) {
-		    printk(KERN_DEBUG "tseg: %010llx\n", tseg);
-		    if ((tseg>>PMD_SHIFT) <
-				(max_low_pfn_mapped>>(PMD_SHIFT-PAGE_SHIFT)) ||
-			((tseg>>PMD_SHIFT) <
-				(max_pfn_mapped>>(PMD_SHIFT-PAGE_SHIFT)) &&
-			 (tseg>>PMD_SHIFT) >= (1ULL<<(32 - PMD_SHIFT))))
-			set_memory_4k((unsigned long)__va(tseg), 1);
-		}
-	}
-}
-
-static struct cpu_dev amd_cpu_dev __cpuinitdata = {
-	.c_vendor	= "AMD",
-	.c_ident	= { "AuthenticAMD" },
-	.c_early_init   = early_init_amd,
-	.c_init		= init_amd,
-};
-
-cpu_vendor_dev_register(X86_VENDOR_AMD, &amd_cpu_dev);
-
diff --git a/arch/x86/kernel/cpu/bugs.c b/arch/x86/kernel/cpu/bugs.c
index c9b58a806e85..c8e315f1aa83 100644
--- a/arch/x86/kernel/cpu/bugs.c
+++ b/arch/x86/kernel/cpu/bugs.c
@@ -50,6 +50,8 @@ static double __initdata y = 3145727.0;
  */
 static void __init check_fpu(void)
 {
+	s32 fdiv_bug;
+
 	if (!boot_cpu_data.hard_math) {
 #ifndef CONFIG_MATH_EMULATION
 		printk(KERN_EMERG "No coprocessor found and no math emulation present.\n");
@@ -74,8 +76,10 @@ static void __init check_fpu(void)
 		"fistpl %0\n\t"
 		"fwait\n\t"
 		"fninit"
-		: "=m" (*&boot_cpu_data.fdiv_bug)
+		: "=m" (*&fdiv_bug)
 		: "m" (*&x), "m" (*&y));
+
+	boot_cpu_data.fdiv_bug = fdiv_bug;
 	if (boot_cpu_data.fdiv_bug)
 		printk("Hmm, FPU with FDIV bug.\n");
 }
diff --git a/arch/x86/kernel/cpu/centaur.c b/arch/x86/kernel/cpu/centaur.c
index e0f45edd6a55..89bfdd9cacc6 100644
--- a/arch/x86/kernel/cpu/centaur.c
+++ b/arch/x86/kernel/cpu/centaur.c
@@ -289,7 +289,6 @@ static void __cpuinit init_c3(struct cpuinfo_x86 *c)
 	if (c->x86_model >= 6 && c->x86_model < 9)
 		set_cpu_cap(c, X86_FEATURE_3DNOW);
 
-	get_model_name(c);
 	display_cacheinfo(c);
 }
 
@@ -314,6 +313,16 @@ enum {
 		EAMD3D		= 1<<20,
 };
 
+static void __cpuinit early_init_centaur(struct cpuinfo_x86 *c)
+{
+	switch (c->x86) {
+	case 5:
+		/* Emulate MTRRs using Centaur's MCR. */
+		set_cpu_cap(c, X86_FEATURE_CENTAUR_MCR);
+		break;
+	}
+}
+
 static void __cpuinit init_centaur(struct cpuinfo_x86 *c)
 {
 
@@ -462,8 +471,10 @@ centaur_size_cache(struct cpuinfo_x86 *c, unsigned int size)
 static struct cpu_dev centaur_cpu_dev __cpuinitdata = {
 	.c_vendor	= "Centaur",
 	.c_ident	= { "CentaurHauls" },
+	.c_early_init	= early_init_centaur,
 	.c_init		= init_centaur,
 	.c_size_cache	= centaur_size_cache,
+	.c_x86_vendor	= X86_VENDOR_CENTAUR,
 };
 
-cpu_vendor_dev_register(X86_VENDOR_CENTAUR, &centaur_cpu_dev);
+cpu_dev_register(centaur_cpu_dev);
diff --git a/arch/x86/kernel/cpu/centaur_64.c b/arch/x86/kernel/cpu/centaur_64.c
index 1d181c40e2e1..0e5cf17a3c89 100644
--- a/arch/x86/kernel/cpu/centaur_64.c
+++ b/arch/x86/kernel/cpu/centaur_64.c
@@ -16,6 +16,8 @@ static void __cpuinit early_init_centaur(struct cpuinfo_x86 *c)
 
 static void __cpuinit init_centaur(struct cpuinfo_x86 *c)
 {
+	early_init_centaur(c);
+
 	if (c->x86 == 0x6 && c->x86_model >= 0xf) {
 		c->x86_cache_alignment = c->x86_clflush_size * 2;
 		set_cpu_cap(c, X86_FEATURE_CONSTANT_TSC);
@@ -29,7 +31,8 @@ static struct cpu_dev centaur_cpu_dev __cpuinitdata = {
 	.c_ident	= { "CentaurHauls" },
 	.c_early_init	= early_init_centaur,
 	.c_init		= init_centaur,
+	.c_x86_vendor	= X86_VENDOR_CENTAUR,
 };
 
-cpu_vendor_dev_register(X86_VENDOR_CENTAUR, &centaur_cpu_dev);
+cpu_dev_register(centaur_cpu_dev);
 
diff --git a/arch/x86/kernel/cpu/cmpxchg.c b/arch/x86/kernel/cpu/cmpxchg.c
new file mode 100644
index 000000000000..2056ccf572cc
--- /dev/null
+++ b/arch/x86/kernel/cpu/cmpxchg.c
@@ -0,0 +1,72 @@
+/*
+ * cmpxchg*() fallbacks for CPU not supporting these instructions
+ */
+
+#include <linux/kernel.h>
+#include <linux/smp.h>
+#include <linux/module.h>
+
+#ifndef CONFIG_X86_CMPXCHG
+unsigned long cmpxchg_386_u8(volatile void *ptr, u8 old, u8 new)
+{
+	u8 prev;
+	unsigned long flags;
+
+	/* Poor man's cmpxchg for 386. Unsuitable for SMP */
+	local_irq_save(flags);
+	prev = *(u8 *)ptr;
+	if (prev == old)
+		*(u8 *)ptr = new;
+	local_irq_restore(flags);
+	return prev;
+}
+EXPORT_SYMBOL(cmpxchg_386_u8);
+
+unsigned long cmpxchg_386_u16(volatile void *ptr, u16 old, u16 new)
+{
+	u16 prev;
+	unsigned long flags;
+
+	/* Poor man's cmpxchg for 386. Unsuitable for SMP */
+	local_irq_save(flags);
+	prev = *(u16 *)ptr;
+	if (prev == old)
+		*(u16 *)ptr = new;
+	local_irq_restore(flags);
+	return prev;
+}
+EXPORT_SYMBOL(cmpxchg_386_u16);
+
+unsigned long cmpxchg_386_u32(volatile void *ptr, u32 old, u32 new)
+{
+	u32 prev;
+	unsigned long flags;
+
+	/* Poor man's cmpxchg for 386. Unsuitable for SMP */
+	local_irq_save(flags);
+	prev = *(u32 *)ptr;
+	if (prev == old)
+		*(u32 *)ptr = new;
+	local_irq_restore(flags);
+	return prev;
+}
+EXPORT_SYMBOL(cmpxchg_386_u32);
+#endif
+
+#ifndef CONFIG_X86_CMPXCHG64
+unsigned long long cmpxchg_486_u64(volatile void *ptr, u64 old, u64 new)
+{
+	u64 prev;
+	unsigned long flags;
+
+	/* Poor man's cmpxchg8b for 386 and 486. Unsuitable for SMP */
+	local_irq_save(flags);
+	prev = *(u64 *)ptr;
+	if (prev == old)
+		*(u64 *)ptr = new;
+	local_irq_restore(flags);
+	return prev;
+}
+EXPORT_SYMBOL(cmpxchg_486_u64);
+#endif
+
diff --git a/arch/x86/kernel/cpu/common.c b/arch/x86/kernel/cpu/common.c
index 80ab20d4fa39..9a57106c1995 100644
--- a/arch/x86/kernel/cpu/common.c
+++ b/arch/x86/kernel/cpu/common.c
@@ -1,27 +1,62 @@
 #include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/sched.h>
 #include <linux/string.h>
+#include <linux/bootmem.h>
+#include <linux/bitops.h>
+#include <linux/module.h>
+#include <linux/kgdb.h>
+#include <linux/topology.h>
 #include <linux/delay.h>
 #include <linux/smp.h>
-#include <linux/module.h>
 #include <linux/percpu.h>
-#include <linux/bootmem.h>
-#include <asm/processor.h>
 #include <asm/i387.h>
 #include <asm/msr.h>
 #include <asm/io.h>
+#include <asm/linkage.h>
 #include <asm/mmu_context.h>
 #include <asm/mtrr.h>
 #include <asm/mce.h>
 #include <asm/pat.h>
+#include <asm/asm.h>
+#include <asm/numa.h>
 #ifdef CONFIG_X86_LOCAL_APIC
 #include <asm/mpspec.h>
 #include <asm/apic.h>
 #include <mach_apic.h>
+#include <asm/genapic.h>
 #endif
 
+#include <asm/pda.h>
+#include <asm/pgtable.h>
+#include <asm/processor.h>
+#include <asm/desc.h>
+#include <asm/atomic.h>
+#include <asm/proto.h>
+#include <asm/sections.h>
+#include <asm/setup.h>
+
 #include "cpu.h"
 
+static struct cpu_dev *this_cpu __cpuinitdata;
+
+#ifdef CONFIG_X86_64
+/* We need valid kernel segments for data and code in long mode too
+ * IRET will check the segment types  kkeil 2000/10/28
+ * Also sysret mandates a special GDT layout
+ */
+/* The TLS descriptors are currently at a different place compared to i386.
+   Hopefully nobody expects them at a fixed place (Wine?) */
 DEFINE_PER_CPU(struct gdt_page, gdt_page) = { .gdt = {
+	[GDT_ENTRY_KERNEL32_CS] = { { { 0x0000ffff, 0x00cf9b00 } } },
+	[GDT_ENTRY_KERNEL_CS] = { { { 0x0000ffff, 0x00af9b00 } } },
+	[GDT_ENTRY_KERNEL_DS] = { { { 0x0000ffff, 0x00cf9300 } } },
+	[GDT_ENTRY_DEFAULT_USER32_CS] = { { { 0x0000ffff, 0x00cffb00 } } },
+	[GDT_ENTRY_DEFAULT_USER_DS] = { { { 0x0000ffff, 0x00cff300 } } },
+	[GDT_ENTRY_DEFAULT_USER_CS] = { { { 0x0000ffff, 0x00affb00 } } },
+} };
+#else
+DEFINE_PER_CPU_PAGE_ALIGNED(struct gdt_page, gdt_page) = { .gdt = {
 	[GDT_ENTRY_KERNEL_CS] = { { { 0x0000ffff, 0x00cf9a00 } } },
 	[GDT_ENTRY_KERNEL_DS] = { { { 0x0000ffff, 0x00cf9200 } } },
 	[GDT_ENTRY_DEFAULT_USER_CS] = { { { 0x0000ffff, 0x00cffa00 } } },
@@ -55,17 +90,150 @@ DEFINE_PER_CPU(struct gdt_page, gdt_page) = { .gdt = {
 	[GDT_ENTRY_ESPFIX_SS] = { { { 0x00000000, 0x00c09200 } } },
 	[GDT_ENTRY_PERCPU] = { { { 0x00000000, 0x00000000 } } },
 } };
+#endif
 EXPORT_PER_CPU_SYMBOL_GPL(gdt_page);
 
-__u32 cleared_cpu_caps[NCAPINTS] __cpuinitdata;
-
+#ifdef CONFIG_X86_32
 static int cachesize_override __cpuinitdata = -1;
 static int disable_x86_serial_nr __cpuinitdata = 1;
 
-struct cpu_dev *cpu_devs[X86_VENDOR_NUM] = {};
+static int __init cachesize_setup(char *str)
+{
+	get_option(&str, &cachesize_override);
+	return 1;
+}
+__setup("cachesize=", cachesize_setup);
+
+static int __init x86_fxsr_setup(char *s)
+{
+	setup_clear_cpu_cap(X86_FEATURE_FXSR);
+	setup_clear_cpu_cap(X86_FEATURE_XMM);
+	return 1;
+}
+__setup("nofxsr", x86_fxsr_setup);
+
+static int __init x86_sep_setup(char *s)
+{
+	setup_clear_cpu_cap(X86_FEATURE_SEP);
+	return 1;
+}
+__setup("nosep", x86_sep_setup);
+
+/* Standard macro to see if a specific flag is changeable */
+static inline int flag_is_changeable_p(u32 flag)
+{
+	u32 f1, f2;
+
+	asm("pushfl\n\t"
+	    "pushfl\n\t"
+	    "popl %0\n\t"
+	    "movl %0,%1\n\t"
+	    "xorl %2,%0\n\t"
+	    "pushl %0\n\t"
+	    "popfl\n\t"
+	    "pushfl\n\t"
+	    "popl %0\n\t"
+	    "popfl\n\t"
+	    : "=&r" (f1), "=&r" (f2)
+	    : "ir" (flag));
+
+	return ((f1^f2) & flag) != 0;
+}
+
+/* Probe for the CPUID instruction */
+static int __cpuinit have_cpuid_p(void)
+{
+	return flag_is_changeable_p(X86_EFLAGS_ID);
+}
+
+static void __cpuinit squash_the_stupid_serial_number(struct cpuinfo_x86 *c)
+{
+	if (cpu_has(c, X86_FEATURE_PN) && disable_x86_serial_nr) {
+		/* Disable processor serial number */
+		unsigned long lo, hi;
+		rdmsr(MSR_IA32_BBL_CR_CTL, lo, hi);
+		lo |= 0x200000;
+		wrmsr(MSR_IA32_BBL_CR_CTL, lo, hi);
+		printk(KERN_NOTICE "CPU serial number disabled.\n");
+		clear_cpu_cap(c, X86_FEATURE_PN);
+
+		/* Disabling the serial number may affect the cpuid level */
+		c->cpuid_level = cpuid_eax(0);
+	}
+}
+
+static int __init x86_serial_nr_setup(char *s)
+{
+	disable_x86_serial_nr = 0;
+	return 1;
+}
+__setup("serialnumber", x86_serial_nr_setup);
+#else
+static inline int flag_is_changeable_p(u32 flag)
+{
+	return 1;
+}
+/* Probe for the CPUID instruction */
+static inline int have_cpuid_p(void)
+{
+	return 1;
+}
+static inline void squash_the_stupid_serial_number(struct cpuinfo_x86 *c)
+{
+}
+#endif
+
+/*
+ * Naming convention should be: <Name> [(<Codename>)]
+ * This table only is used unless init_<vendor>() below doesn't set it;
+ * in particular, if CPUID levels 0x80000002..4 are supported, this isn't used
+ *
+ */
+
+/* Look up CPU names by table lookup. */
+static char __cpuinit *table_lookup_model(struct cpuinfo_x86 *c)
+{
+	struct cpu_model_info *info;
+
+	if (c->x86_model >= 16)
+		return NULL;	/* Range check */
+
+	if (!this_cpu)
+		return NULL;
+
+	info = this_cpu->c_models;
+
+	while (info && info->family) {
+		if (info->family == c->x86)
+			return info->model_names[c->x86_model];
+		info++;
+	}
+	return NULL;		/* Not found */
+}
+
+__u32 cleared_cpu_caps[NCAPINTS] __cpuinitdata;
+
+/* Current gdt points %fs at the "master" per-cpu area: after this,
+ * it's on the real one. */
+void switch_to_new_gdt(void)
+{
+	struct desc_ptr gdt_descr;
+
+	gdt_descr.address = (long)get_cpu_gdt_table(smp_processor_id());
+	gdt_descr.size = GDT_SIZE - 1;
+	load_gdt(&gdt_descr);
+#ifdef CONFIG_X86_32
+	asm("mov %0, %%fs" : : "r" (__KERNEL_PERCPU) : "memory");
+#endif
+}
+
+static struct cpu_dev *cpu_devs[X86_VENDOR_NUM] = {};
 
 static void __cpuinit default_init(struct cpuinfo_x86 *c)
 {
+#ifdef CONFIG_X86_64
+	display_cacheinfo(c);
+#else
 	/* Not much we can do here... */
 	/* Check if at least it has cpuid */
 	if (c->cpuid_level == -1) {
@@ -75,28 +243,22 @@ static void __cpuinit default_init(struct cpuinfo_x86 *c)
 		else if (c->x86 == 3)
 			strcpy(c->x86_model_id, "386");
 	}
+#endif
 }
 
 static struct cpu_dev __cpuinitdata default_cpu = {
 	.c_init	= default_init,
 	.c_vendor = "Unknown",
+	.c_x86_vendor = X86_VENDOR_UNKNOWN,
 };
-static struct cpu_dev *this_cpu __cpuinitdata = &default_cpu;
-
-static int __init cachesize_setup(char *str)
-{
-	get_option(&str, &cachesize_override);
-	return 1;
-}
-__setup("cachesize=", cachesize_setup);
 
-int __cpuinit get_model_name(struct cpuinfo_x86 *c)
+static void __cpuinit get_model_name(struct cpuinfo_x86 *c)
 {
 	unsigned int *v;
 	char *p, *q;
 
-	if (cpuid_eax(0x80000000) < 0x80000004)
-		return 0;
+	if (c->extended_cpuid_level < 0x80000004)
+		return;
 
 	v = (unsigned int *) c->x86_model_id;
 	cpuid(0x80000002, &v[0], &v[1], &v[2], &v[3]);
@@ -115,30 +277,34 @@ int __cpuinit get_model_name(struct cpuinfo_x86 *c)
 	     while (q <= &c->x86_model_id[48])
 		  *q++ = '\0';	/* Zero-pad the rest */
 	}
-
-	return 1;
 }
 
-
 void __cpuinit display_cacheinfo(struct cpuinfo_x86 *c)
 {
-	unsigned int n, dummy, ecx, edx, l2size;
+	unsigned int n, dummy, ebx, ecx, edx, l2size;
 
-	n = cpuid_eax(0x80000000);
+	n = c->extended_cpuid_level;
 
 	if (n >= 0x80000005) {
-		cpuid(0x80000005, &dummy, &dummy, &ecx, &edx);
+		cpuid(0x80000005, &dummy, &ebx, &ecx, &edx);
 		printk(KERN_INFO "CPU: L1 I Cache: %dK (%d bytes/line), D cache %dK (%d bytes/line)\n",
-			edx>>24, edx&0xFF, ecx>>24, ecx&0xFF);
-		c->x86_cache_size = (ecx>>24)+(edx>>24);
+				edx>>24, edx&0xFF, ecx>>24, ecx&0xFF);
+		c->x86_cache_size = (ecx>>24) + (edx>>24);
+#ifdef CONFIG_X86_64
+		/* On K8 L1 TLB is inclusive, so don't count it */
+		c->x86_tlbsize = 0;
+#endif
 	}
 
 	if (n < 0x80000006)	/* Some chips just has a large L1. */
 		return;
 
-	ecx = cpuid_ecx(0x80000006);
+	cpuid(0x80000006, &dummy, &ebx, &ecx, &edx);
 	l2size = ecx >> 16;
 
+#ifdef CONFIG_X86_64
+	c->x86_tlbsize += ((ebx >> 16) & 0xfff) + (ebx & 0xfff);
+#else
 	/* do processor-specific cache resizing */
 	if (this_cpu->c_size_cache)
 		l2size = this_cpu->c_size_cache(c, l2size);
@@ -149,116 +315,106 @@ void __cpuinit display_cacheinfo(struct cpuinfo_x86 *c)
 
 	if (l2size == 0)
 		return;		/* Again, no L2 cache is possible */
+#endif
 
 	c->x86_cache_size = l2size;
 
 	printk(KERN_INFO "CPU: L2 Cache: %dK (%d bytes/line)\n",
-	       l2size, ecx & 0xFF);
+			l2size, ecx & 0xFF);
 }
 
-/*
- * Naming convention should be: <Name> [(<Codename>)]
- * This table only is used unless init_<vendor>() below doesn't set it;
- * in particular, if CPUID levels 0x80000002..4 are supported, this isn't used
- *
- */
-
-/* Look up CPU names by table lookup. */
-static char __cpuinit *table_lookup_model(struct cpuinfo_x86 *c)
+void __cpuinit detect_ht(struct cpuinfo_x86 *c)
 {
-	struct cpu_model_info *info;
+#ifdef CONFIG_X86_HT
+	u32 eax, ebx, ecx, edx;
+	int index_msb, core_bits;
 
-	if (c->x86_model >= 16)
-		return NULL;	/* Range check */
+	if (!cpu_has(c, X86_FEATURE_HT))
+		return;
 
-	if (!this_cpu)
-		return NULL;
+	if (cpu_has(c, X86_FEATURE_CMP_LEGACY))
+		goto out;
 
-	info = this_cpu->c_models;
+	if (cpu_has(c, X86_FEATURE_XTOPOLOGY))
+		return;
 
-	while (info && info->family) {
-		if (info->family == c->x86)
-			return info->model_names[c->x86_model];
-		info++;
+	cpuid(1, &eax, &ebx, &ecx, &edx);
+
+	smp_num_siblings = (ebx & 0xff0000) >> 16;
+
+	if (smp_num_siblings == 1) {
+		printk(KERN_INFO  "CPU: Hyper-Threading is disabled\n");
+	} else if (smp_num_siblings > 1) {
+
+		if (smp_num_siblings > NR_CPUS) {
+			printk(KERN_WARNING "CPU: Unsupported number of siblings %d",
+					smp_num_siblings);
+			smp_num_siblings = 1;
+			return;
+		}
+
+		index_msb = get_count_order(smp_num_siblings);
+#ifdef CONFIG_X86_64
+		c->phys_proc_id = phys_pkg_id(index_msb);
+#else
+		c->phys_proc_id = phys_pkg_id(c->initial_apicid, index_msb);
+#endif
+
+		smp_num_siblings = smp_num_siblings / c->x86_max_cores;
+
+		index_msb = get_count_order(smp_num_siblings);
+
+		core_bits = get_count_order(c->x86_max_cores);
+
+#ifdef CONFIG_X86_64
+		c->cpu_core_id = phys_pkg_id(index_msb) &
+					       ((1 << core_bits) - 1);
+#else
+		c->cpu_core_id = phys_pkg_id(c->initial_apicid, index_msb) &
+					       ((1 << core_bits) - 1);
+#endif
 	}
-	return NULL;		/* Not found */
-}
 
+out:
+	if ((c->x86_max_cores * smp_num_siblings) > 1) {
+		printk(KERN_INFO  "CPU: Physical Processor ID: %d\n",
+		       c->phys_proc_id);
+		printk(KERN_INFO  "CPU: Processor Core ID: %d\n",
+		       c->cpu_core_id);
+	}
+#endif
+}
 
-static void __cpuinit get_cpu_vendor(struct cpuinfo_x86 *c, int early)
+static void __cpuinit get_cpu_vendor(struct cpuinfo_x86 *c)
 {
 	char *v = c->x86_vendor_id;
 	int i;
 	static int printed;
 
 	for (i = 0; i < X86_VENDOR_NUM; i++) {
-		if (cpu_devs[i]) {
-			if (!strcmp(v, cpu_devs[i]->c_ident[0]) ||
-			    (cpu_devs[i]->c_ident[1] &&
-			     !strcmp(v, cpu_devs[i]->c_ident[1]))) {
-				c->x86_vendor = i;
-				if (!early)
-					this_cpu = cpu_devs[i];
-				return;
-			}
+		if (!cpu_devs[i])
+			break;
+
+		if (!strcmp(v, cpu_devs[i]->c_ident[0]) ||
+		    (cpu_devs[i]->c_ident[1] &&
+		     !strcmp(v, cpu_devs[i]->c_ident[1]))) {
+			this_cpu = cpu_devs[i];
+			c->x86_vendor = this_cpu->c_x86_vendor;
+			return;
 		}
 	}
+
 	if (!printed) {
 		printed++;
 		printk(KERN_ERR "CPU: Vendor unknown, using generic init.\n");
 		printk(KERN_ERR "CPU: Your system may be unstable.\n");
 	}
+
 	c->x86_vendor = X86_VENDOR_UNKNOWN;
 	this_cpu = &default_cpu;
 }
 
-
-static int __init x86_fxsr_setup(char *s)
-{
-	setup_clear_cpu_cap(X86_FEATURE_FXSR);
-	setup_clear_cpu_cap(X86_FEATURE_XMM);
-	return 1;
-}
-__setup("nofxsr", x86_fxsr_setup);
-
-
-static int __init x86_sep_setup(char *s)
-{
-	setup_clear_cpu_cap(X86_FEATURE_SEP);
-	return 1;
-}
-__setup("nosep", x86_sep_setup);
-
-
-/* Standard macro to see if a specific flag is changeable */
-static inline int flag_is_changeable_p(u32 flag)
-{
-	u32 f1, f2;
-
-	asm("pushfl\n\t"
-	    "pushfl\n\t"
-	    "popl %0\n\t"
-	    "movl %0,%1\n\t"
-	    "xorl %2,%0\n\t"
-	    "pushl %0\n\t"
-	    "popfl\n\t"
-	    "pushfl\n\t"
-	    "popl %0\n\t"
-	    "popfl\n\t"
-	    : "=&r" (f1), "=&r" (f2)
-	    : "ir" (flag));
-
-	return ((f1^f2) & flag) != 0;
-}
-
-
-/* Probe for the CPUID instruction */
-static int __cpuinit have_cpuid_p(void)
-{
-	return flag_is_changeable_p(X86_EFLAGS_ID);
-}
-
-void __init cpu_detect(struct cpuinfo_x86 *c)
+void __cpuinit cpu_detect(struct cpuinfo_x86 *c)
 {
 	/* Get vendor name */
 	cpuid(0x00000000, (unsigned int *)&c->cpuid_level,
@@ -267,50 +423,68 @@ void __init cpu_detect(struct cpuinfo_x86 *c)
 	      (unsigned int *)&c->x86_vendor_id[4]);
 
 	c->x86 = 4;
+	/* Intel-defined flags: level 0x00000001 */
 	if (c->cpuid_level >= 0x00000001) {
 		u32 junk, tfms, cap0, misc;
 		cpuid(0x00000001, &tfms, &misc, &junk, &cap0);
-		c->x86 = (tfms >> 8) & 15;
-		c->x86_model = (tfms >> 4) & 15;
+		c->x86 = (tfms >> 8) & 0xf;
+		c->x86_model = (tfms >> 4) & 0xf;
+		c->x86_mask = tfms & 0xf;
 		if (c->x86 == 0xf)
 			c->x86 += (tfms >> 20) & 0xff;
 		if (c->x86 >= 0x6)
-			c->x86_model += ((tfms >> 16) & 0xF) << 4;
-		c->x86_mask = tfms & 15;
+			c->x86_model += ((tfms >> 16) & 0xf) << 4;
 		if (cap0 & (1<<19)) {
-			c->x86_cache_alignment = ((misc >> 8) & 0xff) * 8;
 			c->x86_clflush_size = ((misc >> 8) & 0xff) * 8;
+			c->x86_cache_alignment = c->x86_clflush_size;
 		}
 	}
 }
-static void __cpuinit early_get_cap(struct cpuinfo_x86 *c)
+
+static void __cpuinit get_cpu_cap(struct cpuinfo_x86 *c)
 {
 	u32 tfms, xlvl;
-	unsigned int ebx;
+	u32 ebx;
 
-	memset(&c->x86_capability, 0, sizeof c->x86_capability);
-	if (have_cpuid_p()) {
-		/* Intel-defined flags: level 0x00000001 */
-		if (c->cpuid_level >= 0x00000001) {
-			u32 capability, excap;
-			cpuid(0x00000001, &tfms, &ebx, &excap, &capability);
-			c->x86_capability[0] = capability;
-			c->x86_capability[4] = excap;
-		}
+	/* Intel-defined flags: level 0x00000001 */
+	if (c->cpuid_level >= 0x00000001) {
+		u32 capability, excap;
+		cpuid(0x00000001, &tfms, &ebx, &excap, &capability);
+		c->x86_capability[0] = capability;
+		c->x86_capability[4] = excap;
+	}
 
-		/* AMD-defined flags: level 0x80000001 */
-		xlvl = cpuid_eax(0x80000000);
-		if ((xlvl & 0xffff0000) == 0x80000000) {
-			if (xlvl >= 0x80000001) {
-				c->x86_capability[1] = cpuid_edx(0x80000001);
-				c->x86_capability[6] = cpuid_ecx(0x80000001);
-			}
+	/* AMD-defined flags: level 0x80000001 */
+	xlvl = cpuid_eax(0x80000000);
+	c->extended_cpuid_level = xlvl;
+	if ((xlvl & 0xffff0000) == 0x80000000) {
+		if (xlvl >= 0x80000001) {
+			c->x86_capability[1] = cpuid_edx(0x80000001);
+			c->x86_capability[6] = cpuid_ecx(0x80000001);
 		}
+	}
 
+#ifdef CONFIG_X86_64
+	/* Transmeta-defined flags: level 0x80860001 */
+	xlvl = cpuid_eax(0x80860000);
+	if ((xlvl & 0xffff0000) == 0x80860000) {
+		/* Don't set x86_cpuid_level here for now to not confuse. */
+		if (xlvl >= 0x80860001)
+			c->x86_capability[2] = cpuid_edx(0x80860001);
 	}
 
-}
+	if (c->extended_cpuid_level >= 0x80000008) {
+		u32 eax = cpuid_eax(0x80000008);
+
+		c->x86_virt_bits = (eax >> 8) & 0xff;
+		c->x86_phys_bits = eax & 0xff;
+	}
+#endif
 
+	if (c->extended_cpuid_level >= 0x80000007)
+		c->x86_power = cpuid_edx(0x80000007);
+
+}
 /*
  * Do minimum CPU detection early.
  * Fields really needed: vendor, cpuid_level, family, model, mask,
@@ -320,109 +494,126 @@ static void __cpuinit early_get_cap(struct cpuinfo_x86 *c)
  * WARNING: this function is only called on the BP.  Don't add code here
  * that is supposed to run on all CPUs.
  */
-static void __init early_cpu_detect(void)
+static void __init early_identify_cpu(struct cpuinfo_x86 *c)
 {
-	struct cpuinfo_x86 *c = &boot_cpu_data;
-
-	c->x86_cache_alignment = 32;
+#ifdef CONFIG_X86_64
+	c->x86_clflush_size = 64;
+#else
 	c->x86_clflush_size = 32;
+#endif
+	c->x86_cache_alignment = c->x86_clflush_size;
 
 	if (!have_cpuid_p())
 		return;
 
+	memset(&c->x86_capability, 0, sizeof c->x86_capability);
+
+	c->extended_cpuid_level = 0;
+
 	cpu_detect(c);
 
-	get_cpu_vendor(c, 1);
+	get_cpu_vendor(c);
+
+	get_cpu_cap(c);
 
-	if (c->x86_vendor != X86_VENDOR_UNKNOWN &&
-	    cpu_devs[c->x86_vendor]->c_early_init)
-		cpu_devs[c->x86_vendor]->c_early_init(c);
+	if (this_cpu->c_early_init)
+		this_cpu->c_early_init(c);
 
-	early_get_cap(c);
+	validate_pat_support(c);
 }
 
-static void __cpuinit generic_identify(struct cpuinfo_x86 *c)
+void __init early_cpu_init(void)
 {
-	u32 tfms, xlvl;
-	unsigned int ebx;
-
-	if (have_cpuid_p()) {
-		/* Get vendor name */
-		cpuid(0x00000000, (unsigned int *)&c->cpuid_level,
-		      (unsigned int *)&c->x86_vendor_id[0],
-		      (unsigned int *)&c->x86_vendor_id[8],
-		      (unsigned int *)&c->x86_vendor_id[4]);
-
-		get_cpu_vendor(c, 0);
-		/* Initialize the standard set of capabilities */
-		/* Note that the vendor-specific code below might override */
-		/* Intel-defined flags: level 0x00000001 */
-		if (c->cpuid_level >= 0x00000001) {
-			u32 capability, excap;
-			cpuid(0x00000001, &tfms, &ebx, &excap, &capability);
-			c->x86_capability[0] = capability;
-			c->x86_capability[4] = excap;
-			c->x86 = (tfms >> 8) & 15;
-			c->x86_model = (tfms >> 4) & 15;
-			if (c->x86 == 0xf)
-				c->x86 += (tfms >> 20) & 0xff;
-			if (c->x86 >= 0x6)
-				c->x86_model += ((tfms >> 16) & 0xF) << 4;
-			c->x86_mask = tfms & 15;
-			c->initial_apicid = (ebx >> 24) & 0xFF;
-#ifdef CONFIG_X86_HT
-			c->apicid = phys_pkg_id(c->initial_apicid, 0);
-			c->phys_proc_id = c->initial_apicid;
-#else
-			c->apicid = c->initial_apicid;
-#endif
-			if (test_cpu_cap(c, X86_FEATURE_CLFLSH))
-				c->x86_clflush_size = ((ebx >> 8) & 0xff) * 8;
-		} else {
-			/* Have CPUID level 0 only - unheard of */
-			c->x86 = 4;
-		}
-
-		/* AMD-defined flags: level 0x80000001 */
-		xlvl = cpuid_eax(0x80000000);
-		if ((xlvl & 0xffff0000) == 0x80000000) {
-			if (xlvl >= 0x80000001) {
-				c->x86_capability[1] = cpuid_edx(0x80000001);
-				c->x86_capability[6] = cpuid_ecx(0x80000001);
-			}
-			if (xlvl >= 0x80000004)
-				get_model_name(c); /* Default name */
+	struct cpu_dev **cdev;
+	int count = 0;
+
+	printk("KERNEL supported cpus:\n");
+	for (cdev = __x86_cpu_dev_start; cdev < __x86_cpu_dev_end; cdev++) {
+		struct cpu_dev *cpudev = *cdev;
+		unsigned int j;
+
+		if (count >= X86_VENDOR_NUM)
+			break;
+		cpu_devs[count] = cpudev;
+		count++;
+
+		for (j = 0; j < 2; j++) {
+			if (!cpudev->c_ident[j])
+				continue;
+			printk("  %s %s\n", cpudev->c_vendor,
+				cpudev->c_ident[j]);
 		}
-
-		init_scattered_cpuid_features(c);
 	}
 
+	early_identify_cpu(&boot_cpu_data);
 }
 
-static void __cpuinit squash_the_stupid_serial_number(struct cpuinfo_x86 *c)
+/*
+ * The NOPL instruction is supposed to exist on all CPUs with
+ * family >= 6, unfortunately, that's not true in practice because
+ * of early VIA chips and (more importantly) broken virtualizers that
+ * are not easy to detect.  Hence, probe for it based on first
+ * principles.
+ *
+ * Note: no 64-bit chip is known to lack these, but put the code here
+ * for consistency with 32 bits, and to make it utterly trivial to
+ * diagnose the problem should it ever surface.
+ */
+static void __cpuinit detect_nopl(struct cpuinfo_x86 *c)
 {
-	if (cpu_has(c, X86_FEATURE_PN) && disable_x86_serial_nr) {
-		/* Disable processor serial number */
-		unsigned long lo, hi;
-		rdmsr(MSR_IA32_BBL_CR_CTL, lo, hi);
-		lo |= 0x200000;
-		wrmsr(MSR_IA32_BBL_CR_CTL, lo, hi);
-		printk(KERN_NOTICE "CPU serial number disabled.\n");
-		clear_cpu_cap(c, X86_FEATURE_PN);
-
-		/* Disabling the serial number may affect the cpuid level */
-		c->cpuid_level = cpuid_eax(0);
+	const u32 nopl_signature = 0x888c53b1; /* Random number */
+	u32 has_nopl = nopl_signature;
+
+	clear_cpu_cap(c, X86_FEATURE_NOPL);
+	if (c->x86 >= 6) {
+		asm volatile("\n"
+			     "1:      .byte 0x0f,0x1f,0xc0\n" /* nopl %eax */
+			     "2:\n"
+			     "        .section .fixup,\"ax\"\n"
+			     "3:      xor %0,%0\n"
+			     "        jmp 2b\n"
+			     "        .previous\n"
+			     _ASM_EXTABLE(1b,3b)
+			     : "+a" (has_nopl));
+
+		if (has_nopl == nopl_signature)
+			set_cpu_cap(c, X86_FEATURE_NOPL);
 	}
 }
 
-static int __init x86_serial_nr_setup(char *s)
+static void __cpuinit generic_identify(struct cpuinfo_x86 *c)
 {
-	disable_x86_serial_nr = 0;
-	return 1;
-}
-__setup("serialnumber", x86_serial_nr_setup);
+	if (!have_cpuid_p())
+		return;
+
+	c->extended_cpuid_level = 0;
+
+	cpu_detect(c);
+
+	get_cpu_vendor(c);
+
+	get_cpu_cap(c);
+
+	if (c->cpuid_level >= 0x00000001) {
+		c->initial_apicid = (cpuid_ebx(1) >> 24) & 0xFF;
+#ifdef CONFIG_X86_32
+# ifdef CONFIG_X86_HT
+		c->apicid = phys_pkg_id(c->initial_apicid, 0);
+# else
+		c->apicid = c->initial_apicid;
+# endif
+#endif
+
+#ifdef CONFIG_X86_HT
+		c->phys_proc_id = c->initial_apicid;
+#endif
+	}
 
+	get_model_name(c); /* Default name */
 
+	init_scattered_cpuid_features(c);
+	detect_nopl(c);
+}
 
 /*
  * This does the hard work of actually picking apart the CPU stuff...
@@ -434,12 +625,18 @@ static void __cpuinit identify_cpu(struct cpuinfo_x86 *c)
 	c->loops_per_jiffy = loops_per_jiffy;
 	c->x86_cache_size = -1;
 	c->x86_vendor = X86_VENDOR_UNKNOWN;
-	c->cpuid_level = -1;	/* CPUID not detected */
 	c->x86_model = c->x86_mask = 0;	/* So far unknown... */
 	c->x86_vendor_id[0] = '\0'; /* Unset */
 	c->x86_model_id[0] = '\0';  /* Unset */
 	c->x86_max_cores = 1;
+	c->x86_coreid_bits = 0;
+#ifdef CONFIG_X86_64
+	c->x86_clflush_size = 64;
+#else
+	c->cpuid_level = -1;	/* CPUID not detected */
 	c->x86_clflush_size = 32;
+#endif
+	c->x86_cache_alignment = c->x86_clflush_size;
 	memset(&c->x86_capability, 0, sizeof c->x86_capability);
 
 	if (!have_cpuid_p()) {
@@ -458,6 +655,10 @@ static void __cpuinit identify_cpu(struct cpuinfo_x86 *c)
 	if (this_cpu->c_identify)
 		this_cpu->c_identify(c);
 
+#ifdef CONFIG_X86_64
+	c->apicid = phys_pkg_id(0);
+#endif
+
 	/*
 	 * Vendor-specific initialization.  In this section we
 	 * canonicalize the feature flags, meaning if there are
@@ -491,6 +692,10 @@ static void __cpuinit identify_cpu(struct cpuinfo_x86 *c)
 				c->x86, c->x86_model);
 	}
 
+#ifdef CONFIG_X86_64
+	detect_ht(c);
+#endif
+
 	/*
 	 * On SMP, boot_cpu_data holds the common feature set between
 	 * all CPUs; so make sure that we indicate which features are
@@ -499,7 +704,7 @@ static void __cpuinit identify_cpu(struct cpuinfo_x86 *c)
 	 */
 	if (c != &boot_cpu_data) {
 		/* AND the already accumulated flags with these */
-		for (i = 0 ; i < NCAPINTS ; i++)
+		for (i = 0; i < NCAPINTS; i++)
 			boot_cpu_data.x86_capability[i] &= c->x86_capability[i];
 	}
 
@@ -507,72 +712,79 @@ static void __cpuinit identify_cpu(struct cpuinfo_x86 *c)
 	for (i = 0; i < NCAPINTS; i++)
 		c->x86_capability[i] &= ~cleared_cpu_caps[i];
 
+#ifdef CONFIG_X86_MCE
 	/* Init Machine Check Exception if available. */
 	mcheck_init(c);
+#endif
 
 	select_idle_routine(c);
+
+#if defined(CONFIG_NUMA) && defined(CONFIG_X86_64)
+	numa_add_cpu(smp_processor_id());
+#endif
 }
 
 void __init identify_boot_cpu(void)
 {
 	identify_cpu(&boot_cpu_data);
+#ifdef CONFIG_X86_32
 	sysenter_setup();
 	enable_sep_cpu();
+#endif
 }
 
 void __cpuinit identify_secondary_cpu(struct cpuinfo_x86 *c)
 {
 	BUG_ON(c == &boot_cpu_data);
 	identify_cpu(c);
+#ifdef CONFIG_X86_32
 	enable_sep_cpu();
+#endif
 	mtrr_ap_init();
 }
 
-#ifdef CONFIG_X86_HT
-void __cpuinit detect_ht(struct cpuinfo_x86 *c)
-{
-	u32 	eax, ebx, ecx, edx;
-	int 	index_msb, core_bits;
-
-	cpuid(1, &eax, &ebx, &ecx, &edx);
-
-	if (!cpu_has(c, X86_FEATURE_HT) || cpu_has(c, X86_FEATURE_CMP_LEGACY))
-		return;
-
-	smp_num_siblings = (ebx & 0xff0000) >> 16;
+struct msr_range {
+	unsigned min;
+	unsigned max;
+};
 
-	if (smp_num_siblings == 1) {
-		printk(KERN_INFO  "CPU: Hyper-Threading is disabled\n");
-	} else if (smp_num_siblings > 1) {
+static struct msr_range msr_range_array[] __cpuinitdata = {
+	{ 0x00000000, 0x00000418},
+	{ 0xc0000000, 0xc000040b},
+	{ 0xc0010000, 0xc0010142},
+	{ 0xc0011000, 0xc001103b},
+};
 
-		if (smp_num_siblings > NR_CPUS) {
-			printk(KERN_WARNING "CPU: Unsupported number of the "
-					"siblings %d", smp_num_siblings);
-			smp_num_siblings = 1;
-			return;
+static void __cpuinit print_cpu_msr(void)
+{
+	unsigned index;
+	u64 val;
+	int i;
+	unsigned index_min, index_max;
+
+	for (i = 0; i < ARRAY_SIZE(msr_range_array); i++) {
+		index_min = msr_range_array[i].min;
+		index_max = msr_range_array[i].max;
+		for (index = index_min; index < index_max; index++) {
+			if (rdmsrl_amd_safe(index, &val))
+				continue;
+			printk(KERN_INFO " MSR%08x: %016llx\n", index, val);
 		}
+	}
+}
 
-		index_msb = get_count_order(smp_num_siblings);
-		c->phys_proc_id = phys_pkg_id(c->initial_apicid, index_msb);
-
-		printk(KERN_INFO  "CPU: Physical Processor ID: %d\n",
-		       c->phys_proc_id);
-
-		smp_num_siblings = smp_num_siblings / c->x86_max_cores;
-
-		index_msb = get_count_order(smp_num_siblings) ;
-
-		core_bits = get_count_order(c->x86_max_cores);
+static int show_msr __cpuinitdata;
+static __init int setup_show_msr(char *arg)
+{
+	int num;
 
-		c->cpu_core_id = phys_pkg_id(c->initial_apicid, index_msb) &
-					       ((1 << core_bits) - 1);
+	get_option(&arg, &num);
 
-		if (c->x86_max_cores > 1)
-			printk(KERN_INFO  "CPU: Processor Core ID: %d\n",
-			       c->cpu_core_id);
-	}
+	if (num > 0)
+		show_msr = num;
+	return 1;
 }
-#endif
+__setup("show_msr=", setup_show_msr);
 
 static __init int setup_noclflush(char *arg)
 {
@@ -591,17 +803,25 @@ void __cpuinit print_cpu_info(struct cpuinfo_x86 *c)
 		vendor = c->x86_vendor_id;
 
 	if (vendor && strncmp(c->x86_model_id, vendor, strlen(vendor)))
-		printk("%s ", vendor);
+		printk(KERN_CONT "%s ", vendor);
 
-	if (!c->x86_model_id[0])
-		printk("%d86", c->x86);
+	if (c->x86_model_id[0])
+		printk(KERN_CONT "%s", c->x86_model_id);
 	else
-		printk("%s", c->x86_model_id);
+		printk(KERN_CONT "%d86", c->x86);
 
 	if (c->x86_mask || c->cpuid_level >= 0)
-		printk(" stepping %02x\n", c->x86_mask);
+		printk(KERN_CONT " stepping %02x\n", c->x86_mask);
 	else
-		printk("\n");
+		printk(KERN_CONT "\n");
+
+#ifdef CONFIG_SMP
+	if (c->cpu_index < show_msr)
+		print_cpu_msr();
+#else
+	if (show_msr)
+		print_cpu_msr();
+#endif
 }
 
 static __init int setup_disablecpuid(char *arg)
@@ -617,19 +837,89 @@ __setup("clearcpuid=", setup_disablecpuid);
 
 cpumask_t cpu_initialized __cpuinitdata = CPU_MASK_NONE;
 
-void __init early_cpu_init(void)
+#ifdef CONFIG_X86_64
+struct x8664_pda **_cpu_pda __read_mostly;
+EXPORT_SYMBOL(_cpu_pda);
+
+struct desc_ptr idt_descr = { 256 * 16 - 1, (unsigned long) idt_table };
+
+char boot_cpu_stack[IRQSTACKSIZE] __page_aligned_bss;
+
+void __cpuinit pda_init(int cpu)
 {
-	struct cpu_vendor_dev *cvdev;
+	struct x8664_pda *pda = cpu_pda(cpu);
+
+	/* Setup up data that may be needed in __get_free_pages early */
+	loadsegment(fs, 0);
+	loadsegment(gs, 0);
+	/* Memory clobbers used to order PDA accessed */
+	mb();
+	wrmsrl(MSR_GS_BASE, pda);
+	mb();
+
+	pda->cpunumber = cpu;
+	pda->irqcount = -1;
+	pda->kernelstack = (unsigned long)stack_thread_info() -
+				 PDA_STACKOFFSET + THREAD_SIZE;
+	pda->active_mm = &init_mm;
+	pda->mmu_state = 0;
+
+	if (cpu == 0) {
+		/* others are initialized in smpboot.c */
+		pda->pcurrent = &init_task;
+		pda->irqstackptr = boot_cpu_stack;
+		pda->irqstackptr += IRQSTACKSIZE - 64;
+	} else {
+		if (!pda->irqstackptr) {
+			pda->irqstackptr = (char *)
+				__get_free_pages(GFP_ATOMIC, IRQSTACK_ORDER);
+			if (!pda->irqstackptr)
+				panic("cannot allocate irqstack for cpu %d",
+				      cpu);
+			pda->irqstackptr += IRQSTACKSIZE - 64;
+		}
+
+		if (pda->nodenumber == 0 && cpu_to_node(cpu) != NUMA_NO_NODE)
+			pda->nodenumber = cpu_to_node(cpu);
+	}
+}
+
+char boot_exception_stacks[(N_EXCEPTION_STACKS - 1) * EXCEPTION_STKSZ +
+			   DEBUG_STKSZ] __page_aligned_bss;
 
-	for (cvdev = __x86cpuvendor_start ;
-	     cvdev < __x86cpuvendor_end   ;
-	     cvdev++)
-		cpu_devs[cvdev->vendor] = cvdev->cpu_dev;
+extern asmlinkage void ignore_sysret(void);
 
-	early_cpu_detect();
-	validate_pat_support(&boot_cpu_data);
+/* May not be marked __init: used by software suspend */
+void syscall_init(void)
+{
+	/*
+	 * LSTAR and STAR live in a bit strange symbiosis.
+	 * They both write to the same internal register. STAR allows to
+	 * set CS/DS but only a 32bit target. LSTAR sets the 64bit rip.
+	 */
+	wrmsrl(MSR_STAR,  ((u64)__USER32_CS)<<48  | ((u64)__KERNEL_CS)<<32);
+	wrmsrl(MSR_LSTAR, system_call);
+	wrmsrl(MSR_CSTAR, ignore_sysret);
+
+#ifdef CONFIG_IA32_EMULATION
+	syscall32_cpu_init();
+#endif
+
+	/* Flags to clear on syscall */
+	wrmsrl(MSR_SYSCALL_MASK,
+	       X86_EFLAGS_TF|X86_EFLAGS_DF|X86_EFLAGS_IF|X86_EFLAGS_IOPL);
 }
 
+unsigned long kernel_eflags;
+
+/*
+ * Copies of the original ist values from the tss are only accessed during
+ * debugging, no special alignment required.
+ */
+DEFINE_PER_CPU(struct orig_ist, orig_ist);
+
+#else
+
 /* Make sure %fs is initialized properly in idle threads */
 struct pt_regs * __cpuinit idle_regs(struct pt_regs *regs)
 {
@@ -637,25 +927,136 @@ struct pt_regs * __cpuinit idle_regs(struct pt_regs *regs)
 	regs->fs = __KERNEL_PERCPU;
 	return regs;
 }
-
-/* Current gdt points %fs at the "master" per-cpu area: after this,
- * it's on the real one. */
-void switch_to_new_gdt(void)
-{
-	struct desc_ptr gdt_descr;
-
-	gdt_descr.address = (long)get_cpu_gdt_table(smp_processor_id());
-	gdt_descr.size = GDT_SIZE - 1;
-	load_gdt(&gdt_descr);
-	asm("mov %0, %%fs" : : "r" (__KERNEL_PERCPU) : "memory");
-}
+#endif
 
 /*
  * cpu_init() initializes state that is per-CPU. Some data is already
  * initialized (naturally) in the bootstrap process, such as the GDT
  * and IDT. We reload them nevertheless, this function acts as a
  * 'CPU state barrier', nothing should get across.
+ * A lot of state is already set up in PDA init for 64 bit
  */
+#ifdef CONFIG_X86_64
+void __cpuinit cpu_init(void)
+{
+	int cpu = stack_smp_processor_id();
+	struct tss_struct *t = &per_cpu(init_tss, cpu);
+	struct orig_ist *orig_ist = &per_cpu(orig_ist, cpu);
+	unsigned long v;
+	char *estacks = NULL;
+	struct task_struct *me;
+	int i;
+
+	/* CPU 0 is initialised in head64.c */
+	if (cpu != 0)
+		pda_init(cpu);
+	else
+		estacks = boot_exception_stacks;
+
+	me = current;
+
+	if (cpu_test_and_set(cpu, cpu_initialized))
+		panic("CPU#%d already initialized!\n", cpu);
+
+	printk(KERN_INFO "Initializing CPU#%d\n", cpu);
+
+	clear_in_cr4(X86_CR4_VME|X86_CR4_PVI|X86_CR4_TSD|X86_CR4_DE);
+
+	/*
+	 * Initialize the per-CPU GDT with the boot GDT,
+	 * and set up the GDT descriptor:
+	 */
+
+	switch_to_new_gdt();
+	load_idt((const struct desc_ptr *)&idt_descr);
+
+	memset(me->thread.tls_array, 0, GDT_ENTRY_TLS_ENTRIES * 8);
+	syscall_init();
+
+	wrmsrl(MSR_FS_BASE, 0);
+	wrmsrl(MSR_KERNEL_GS_BASE, 0);
+	barrier();
+
+	check_efer();
+	if (cpu != 0 && x2apic)
+		enable_x2apic();
+
+	/*
+	 * set up and load the per-CPU TSS
+	 */
+	if (!orig_ist->ist[0]) {
+		static const unsigned int order[N_EXCEPTION_STACKS] = {
+		  [0 ... N_EXCEPTION_STACKS - 1] = EXCEPTION_STACK_ORDER,
+		  [DEBUG_STACK - 1] = DEBUG_STACK_ORDER
+		};
+		for (v = 0; v < N_EXCEPTION_STACKS; v++) {
+			if (cpu) {
+				estacks = (char *)__get_free_pages(GFP_ATOMIC, order[v]);
+				if (!estacks)
+					panic("Cannot allocate exception "
+					      "stack %ld %d\n", v, cpu);
+			}
+			estacks += PAGE_SIZE << order[v];
+			orig_ist->ist[v] = t->x86_tss.ist[v] =
+					(unsigned long)estacks;
+		}
+	}
+
+	t->x86_tss.io_bitmap_base = offsetof(struct tss_struct, io_bitmap);
+	/*
+	 * <= is required because the CPU will access up to
+	 * 8 bits beyond the end of the IO permission bitmap.
+	 */
+	for (i = 0; i <= IO_BITMAP_LONGS; i++)
+		t->io_bitmap[i] = ~0UL;
+
+	atomic_inc(&init_mm.mm_count);
+	me->active_mm = &init_mm;
+	if (me->mm)
+		BUG();
+	enter_lazy_tlb(&init_mm, me);
+
+	load_sp0(t, &current->thread);
+	set_tss_desc(cpu, t);
+	load_TR_desc();
+	load_LDT(&init_mm.context);
+
+#ifdef CONFIG_KGDB
+	/*
+	 * If the kgdb is connected no debug regs should be altered.  This
+	 * is only applicable when KGDB and a KGDB I/O module are built
+	 * into the kernel and you are using early debugging with
+	 * kgdbwait. KGDB will control the kernel HW breakpoint registers.
+	 */
+	if (kgdb_connected && arch_kgdb_ops.correct_hw_break)
+		arch_kgdb_ops.correct_hw_break();
+	else {
+#endif
+	/*
+	 * Clear all 6 debug registers:
+	 */
+
+	set_debugreg(0UL, 0);
+	set_debugreg(0UL, 1);
+	set_debugreg(0UL, 2);
+	set_debugreg(0UL, 3);
+	set_debugreg(0UL, 6);
+	set_debugreg(0UL, 7);
+#ifdef CONFIG_KGDB
+	/* If the kgdb is connected no debug regs should be altered. */
+	}
+#endif
+
+	fpu_init();
+
+	raw_local_save_flags(kernel_eflags);
+
+	if (is_uv_system())
+		uv_cpu_init();
+}
+
+#else
+
 void __cpuinit cpu_init(void)
 {
 	int cpu = smp_processor_id();
@@ -709,9 +1110,20 @@ void __cpuinit cpu_init(void)
 	/*
 	 * Force FPU initialization:
 	 */
-	current_thread_info()->status = 0;
+	if (cpu_has_xsave)
+		current_thread_info()->status = TS_XSAVE;
+	else
+		current_thread_info()->status = 0;
 	clear_used_math();
 	mxcsr_feature_mask_init();
+
+	/*
+	 * Boot processor to setup the FP and extended state context info.
+	 */
+	if (!smp_processor_id())
+		init_thread_xstate();
+
+	xsave_init();
 }
 
 #ifdef CONFIG_HOTPLUG_CPU
@@ -725,3 +1137,5 @@ void __cpuinit cpu_uninit(void)
 	per_cpu(cpu_tlbstate, cpu).active_mm = &init_mm;
 }
 #endif
+
+#endif
diff --git a/arch/x86/kernel/cpu/common_64.c b/arch/x86/kernel/cpu/common_64.c
deleted file mode 100644
index dd6e3f15017e..000000000000
--- a/arch/x86/kernel/cpu/common_64.c
+++ /dev/null
@@ -1,670 +0,0 @@
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/sched.h>
-#include <linux/string.h>
-#include <linux/bootmem.h>
-#include <linux/bitops.h>
-#include <linux/module.h>
-#include <linux/kgdb.h>
-#include <linux/topology.h>
-#include <linux/delay.h>
-#include <linux/smp.h>
-#include <linux/percpu.h>
-#include <asm/i387.h>
-#include <asm/msr.h>
-#include <asm/io.h>
-#include <asm/linkage.h>
-#include <asm/mmu_context.h>
-#include <asm/mtrr.h>
-#include <asm/mce.h>
-#include <asm/pat.h>
-#include <asm/numa.h>
-#ifdef CONFIG_X86_LOCAL_APIC
-#include <asm/mpspec.h>
-#include <asm/apic.h>
-#include <mach_apic.h>
-#endif
-#include <asm/pda.h>
-#include <asm/pgtable.h>
-#include <asm/processor.h>
-#include <asm/desc.h>
-#include <asm/atomic.h>
-#include <asm/proto.h>
-#include <asm/sections.h>
-#include <asm/setup.h>
-#include <asm/genapic.h>
-
-#include "cpu.h"
-
-/* We need valid kernel segments for data and code in long mode too
- * IRET will check the segment types  kkeil 2000/10/28
- * Also sysret mandates a special GDT layout
- */
-/* The TLS descriptors are currently at a different place compared to i386.
-   Hopefully nobody expects them at a fixed place (Wine?) */
-DEFINE_PER_CPU(struct gdt_page, gdt_page) = { .gdt = {
-	[GDT_ENTRY_KERNEL32_CS] = { { { 0x0000ffff, 0x00cf9b00 } } },
-	[GDT_ENTRY_KERNEL_CS] = { { { 0x0000ffff, 0x00af9b00 } } },
-	[GDT_ENTRY_KERNEL_DS] = { { { 0x0000ffff, 0x00cf9300 } } },
-	[GDT_ENTRY_DEFAULT_USER32_CS] = { { { 0x0000ffff, 0x00cffb00 } } },
-	[GDT_ENTRY_DEFAULT_USER_DS] = { { { 0x0000ffff, 0x00cff300 } } },
-	[GDT_ENTRY_DEFAULT_USER_CS] = { { { 0x0000ffff, 0x00affb00 } } },
-} };
-EXPORT_PER_CPU_SYMBOL_GPL(gdt_page);
-
-__u32 cleared_cpu_caps[NCAPINTS] __cpuinitdata;
-
-/* Current gdt points %fs at the "master" per-cpu area: after this,
- * it's on the real one. */
-void switch_to_new_gdt(void)
-{
-	struct desc_ptr gdt_descr;
-
-	gdt_descr.address = (long)get_cpu_gdt_table(smp_processor_id());
-	gdt_descr.size = GDT_SIZE - 1;
-	load_gdt(&gdt_descr);
-}
-
-struct cpu_dev *cpu_devs[X86_VENDOR_NUM] = {};
-
-static void __cpuinit default_init(struct cpuinfo_x86 *c)
-{
-	display_cacheinfo(c);
-}
-
-static struct cpu_dev __cpuinitdata default_cpu = {
-	.c_init	= default_init,
-	.c_vendor = "Unknown",
-};
-static struct cpu_dev *this_cpu __cpuinitdata = &default_cpu;
-
-int __cpuinit get_model_name(struct cpuinfo_x86 *c)
-{
-	unsigned int *v;
-
-	if (c->extended_cpuid_level < 0x80000004)
-		return 0;
-
-	v = (unsigned int *) c->x86_model_id;
-	cpuid(0x80000002, &v[0], &v[1], &v[2], &v[3]);
-	cpuid(0x80000003, &v[4], &v[5], &v[6], &v[7]);
-	cpuid(0x80000004, &v[8], &v[9], &v[10], &v[11]);
-	c->x86_model_id[48] = 0;
-	return 1;
-}
-
-
-void __cpuinit display_cacheinfo(struct cpuinfo_x86 *c)
-{
-	unsigned int n, dummy, ebx, ecx, edx;
-
-	n = c->extended_cpuid_level;
-
-	if (n >= 0x80000005) {
-		cpuid(0x80000005, &dummy, &ebx, &ecx, &edx);
-		printk(KERN_INFO "CPU: L1 I Cache: %dK (%d bytes/line), "
-		       "D cache %dK (%d bytes/line)\n",
-		       edx>>24, edx&0xFF, ecx>>24, ecx&0xFF);
-		c->x86_cache_size = (ecx>>24) + (edx>>24);
-		/* On K8 L1 TLB is inclusive, so don't count it */
-		c->x86_tlbsize = 0;
-	}
-
-	if (n >= 0x80000006) {
-		cpuid(0x80000006, &dummy, &ebx, &ecx, &edx);
-		ecx = cpuid_ecx(0x80000006);
-		c->x86_cache_size = ecx >> 16;
-		c->x86_tlbsize += ((ebx >> 16) & 0xfff) + (ebx & 0xfff);
-
-		printk(KERN_INFO "CPU: L2 Cache: %dK (%d bytes/line)\n",
-		c->x86_cache_size, ecx & 0xFF);
-	}
-}
-
-void __cpuinit detect_ht(struct cpuinfo_x86 *c)
-{
-#ifdef CONFIG_SMP
-	u32 eax, ebx, ecx, edx;
-	int index_msb, core_bits;
-
-	cpuid(1, &eax, &ebx, &ecx, &edx);
-
-
-	if (!cpu_has(c, X86_FEATURE_HT))
-		return;
-	if (cpu_has(c, X86_FEATURE_CMP_LEGACY))
-		goto out;
-
-	smp_num_siblings = (ebx & 0xff0000) >> 16;
-
-	if (smp_num_siblings == 1) {
-		printk(KERN_INFO  "CPU: Hyper-Threading is disabled\n");
-	} else if (smp_num_siblings > 1) {
-
-		if (smp_num_siblings > NR_CPUS) {
-			printk(KERN_WARNING "CPU: Unsupported number of "
-			       "siblings %d", smp_num_siblings);
-			smp_num_siblings = 1;
-			return;
-		}
-
-		index_msb = get_count_order(smp_num_siblings);
-		c->phys_proc_id = phys_pkg_id(index_msb);
-
-		smp_num_siblings = smp_num_siblings / c->x86_max_cores;
-
-		index_msb = get_count_order(smp_num_siblings);
-
-		core_bits = get_count_order(c->x86_max_cores);
-
-		c->cpu_core_id = phys_pkg_id(index_msb) &
-					       ((1 << core_bits) - 1);
-	}
-out:
-	if ((c->x86_max_cores * smp_num_siblings) > 1) {
-		printk(KERN_INFO  "CPU: Physical Processor ID: %d\n",
-		       c->phys_proc_id);
-		printk(KERN_INFO  "CPU: Processor Core ID: %d\n",
-		       c->cpu_core_id);
-	}
-
-#endif
-}
-
-static void __cpuinit get_cpu_vendor(struct cpuinfo_x86 *c)
-{
-	char *v = c->x86_vendor_id;
-	int i;
-	static int printed;
-
-	for (i = 0; i < X86_VENDOR_NUM; i++) {
-		if (cpu_devs[i]) {
-			if (!strcmp(v, cpu_devs[i]->c_ident[0]) ||
-			    (cpu_devs[i]->c_ident[1] &&
-			    !strcmp(v, cpu_devs[i]->c_ident[1]))) {
-				c->x86_vendor = i;
-				this_cpu = cpu_devs[i];
-				return;
-			}
-		}
-	}
-	if (!printed) {
-		printed++;
-		printk(KERN_ERR "CPU: Vendor unknown, using generic init.\n");
-		printk(KERN_ERR "CPU: Your system may be unstable.\n");
-	}
-	c->x86_vendor = X86_VENDOR_UNKNOWN;
-}
-
-static void __init early_cpu_support_print(void)
-{
-	int i,j;
-	struct cpu_dev *cpu_devx;
-
-	printk("KERNEL supported cpus:\n");
-	for (i = 0; i < X86_VENDOR_NUM; i++) {
-		cpu_devx = cpu_devs[i];
-		if (!cpu_devx)
-			continue;
-		for (j = 0; j < 2; j++) {
-			if (!cpu_devx->c_ident[j])
-				continue;
-			printk("  %s %s\n", cpu_devx->c_vendor,
-				cpu_devx->c_ident[j]);
-		}
-	}
-}
-
-static void __cpuinit early_identify_cpu(struct cpuinfo_x86 *c);
-
-void __init early_cpu_init(void)
-{
-        struct cpu_vendor_dev *cvdev;
-
-        for (cvdev = __x86cpuvendor_start ;
-             cvdev < __x86cpuvendor_end   ;
-             cvdev++)
-                cpu_devs[cvdev->vendor] = cvdev->cpu_dev;
-	early_cpu_support_print();
-	early_identify_cpu(&boot_cpu_data);
-}
-
-/* Do some early cpuid on the boot CPU to get some parameter that are
-   needed before check_bugs. Everything advanced is in identify_cpu
-   below. */
-static void __cpuinit early_identify_cpu(struct cpuinfo_x86 *c)
-{
-	u32 tfms, xlvl;
-
-	c->loops_per_jiffy = loops_per_jiffy;
-	c->x86_cache_size = -1;
-	c->x86_vendor = X86_VENDOR_UNKNOWN;
-	c->x86_model = c->x86_mask = 0;	/* So far unknown... */
-	c->x86_vendor_id[0] = '\0'; /* Unset */
-	c->x86_model_id[0] = '\0';  /* Unset */
-	c->x86_clflush_size = 64;
-	c->x86_cache_alignment = c->x86_clflush_size;
-	c->x86_max_cores = 1;
-	c->x86_coreid_bits = 0;
-	c->extended_cpuid_level = 0;
-	memset(&c->x86_capability, 0, sizeof c->x86_capability);
-
-	/* Get vendor name */
-	cpuid(0x00000000, (unsigned int *)&c->cpuid_level,
-	      (unsigned int *)&c->x86_vendor_id[0],
-	      (unsigned int *)&c->x86_vendor_id[8],
-	      (unsigned int *)&c->x86_vendor_id[4]);
-
-	get_cpu_vendor(c);
-
-	/* Initialize the standard set of capabilities */
-	/* Note that the vendor-specific code below might override */
-
-	/* Intel-defined flags: level 0x00000001 */
-	if (c->cpuid_level >= 0x00000001) {
-		__u32 misc;
-		cpuid(0x00000001, &tfms, &misc, &c->x86_capability[4],
-		      &c->x86_capability[0]);
-		c->x86 = (tfms >> 8) & 0xf;
-		c->x86_model = (tfms >> 4) & 0xf;
-		c->x86_mask = tfms & 0xf;
-		if (c->x86 == 0xf)
-			c->x86 += (tfms >> 20) & 0xff;
-		if (c->x86 >= 0x6)
-			c->x86_model += ((tfms >> 16) & 0xF) << 4;
-		if (test_cpu_cap(c, X86_FEATURE_CLFLSH))
-			c->x86_clflush_size = ((misc >> 8) & 0xff) * 8;
-	} else {
-		/* Have CPUID level 0 only - unheard of */
-		c->x86 = 4;
-	}
-
-	c->initial_apicid = (cpuid_ebx(1) >> 24) & 0xff;
-#ifdef CONFIG_SMP
-	c->phys_proc_id = c->initial_apicid;
-#endif
-	/* AMD-defined flags: level 0x80000001 */
-	xlvl = cpuid_eax(0x80000000);
-	c->extended_cpuid_level = xlvl;
-	if ((xlvl & 0xffff0000) == 0x80000000) {
-		if (xlvl >= 0x80000001) {
-			c->x86_capability[1] = cpuid_edx(0x80000001);
-			c->x86_capability[6] = cpuid_ecx(0x80000001);
-		}
-		if (xlvl >= 0x80000004)
-			get_model_name(c); /* Default name */
-	}
-
-	/* Transmeta-defined flags: level 0x80860001 */
-	xlvl = cpuid_eax(0x80860000);
-	if ((xlvl & 0xffff0000) == 0x80860000) {
-		/* Don't set x86_cpuid_level here for now to not confuse. */
-		if (xlvl >= 0x80860001)
-			c->x86_capability[2] = cpuid_edx(0x80860001);
-	}
-
-	if (c->extended_cpuid_level >= 0x80000007)
-		c->x86_power = cpuid_edx(0x80000007);
-
-	if (c->extended_cpuid_level >= 0x80000008) {
-		u32 eax = cpuid_eax(0x80000008);
-
-		c->x86_virt_bits = (eax >> 8) & 0xff;
-		c->x86_phys_bits = eax & 0xff;
-	}
-
-	if (c->x86_vendor != X86_VENDOR_UNKNOWN &&
-	    cpu_devs[c->x86_vendor]->c_early_init)
-		cpu_devs[c->x86_vendor]->c_early_init(c);
-
-	validate_pat_support(c);
-}
-
-/*
- * This does the hard work of actually picking apart the CPU stuff...
- */
-static void __cpuinit identify_cpu(struct cpuinfo_x86 *c)
-{
-	int i;
-
-	early_identify_cpu(c);
-
-	init_scattered_cpuid_features(c);
-
-	c->apicid = phys_pkg_id(0);
-
-	/*
-	 * Vendor-specific initialization.  In this section we
-	 * canonicalize the feature flags, meaning if there are
-	 * features a certain CPU supports which CPUID doesn't
-	 * tell us, CPUID claiming incorrect flags, or other bugs,
-	 * we handle them here.
-	 *
-	 * At the end of this section, c->x86_capability better
-	 * indicate the features this CPU genuinely supports!
-	 */
-	if (this_cpu->c_init)
-		this_cpu->c_init(c);
-
-	detect_ht(c);
-
-	/*
-	 * On SMP, boot_cpu_data holds the common feature set between
-	 * all CPUs; so make sure that we indicate which features are
-	 * common between the CPUs.  The first time this routine gets
-	 * executed, c == &boot_cpu_data.
-	 */
-	if (c != &boot_cpu_data) {
-		/* AND the already accumulated flags with these */
-		for (i = 0; i < NCAPINTS; i++)
-			boot_cpu_data.x86_capability[i] &= c->x86_capability[i];
-	}
-
-	/* Clear all flags overriden by options */
-	for (i = 0; i < NCAPINTS; i++)
-		c->x86_capability[i] &= ~cleared_cpu_caps[i];
-
-#ifdef CONFIG_X86_MCE
-	mcheck_init(c);
-#endif
-	select_idle_routine(c);
-
-#ifdef CONFIG_NUMA
-	numa_add_cpu(smp_processor_id());
-#endif
-
-}
-
-void __cpuinit identify_boot_cpu(void)
-{
-	identify_cpu(&boot_cpu_data);
-}
-
-void __cpuinit identify_secondary_cpu(struct cpuinfo_x86 *c)
-{
-	BUG_ON(c == &boot_cpu_data);
-	identify_cpu(c);
-	mtrr_ap_init();
-}
-
-static __init int setup_noclflush(char *arg)
-{
-	setup_clear_cpu_cap(X86_FEATURE_CLFLSH);
-	return 1;
-}
-__setup("noclflush", setup_noclflush);
-
-void __cpuinit print_cpu_info(struct cpuinfo_x86 *c)
-{
-	if (c->x86_model_id[0])
-		printk(KERN_CONT "%s", c->x86_model_id);
-
-	if (c->x86_mask || c->cpuid_level >= 0)
-		printk(KERN_CONT " stepping %02x\n", c->x86_mask);
-	else
-		printk(KERN_CONT "\n");
-}
-
-static __init int setup_disablecpuid(char *arg)
-{
-	int bit;
-	if (get_option(&arg, &bit) && bit < NCAPINTS*32)
-		setup_clear_cpu_cap(bit);
-	else
-		return 0;
-	return 1;
-}
-__setup("clearcpuid=", setup_disablecpuid);
-
-cpumask_t cpu_initialized __cpuinitdata = CPU_MASK_NONE;
-
-struct x8664_pda **_cpu_pda __read_mostly;
-EXPORT_SYMBOL(_cpu_pda);
-
-struct desc_ptr idt_descr = { 256 * 16 - 1, (unsigned long) idt_table };
-
-char boot_cpu_stack[IRQSTACKSIZE] __page_aligned_bss;
-
-unsigned long __supported_pte_mask __read_mostly = ~0UL;
-EXPORT_SYMBOL_GPL(__supported_pte_mask);
-
-static int do_not_nx __cpuinitdata;
-
-/* noexec=on|off
-Control non executable mappings for 64bit processes.
-
-on	Enable(default)
-off	Disable
-*/
-static int __init nonx_setup(char *str)
-{
-	if (!str)
-		return -EINVAL;
-	if (!strncmp(str, "on", 2)) {
-		__supported_pte_mask |= _PAGE_NX;
-		do_not_nx = 0;
-	} else if (!strncmp(str, "off", 3)) {
-		do_not_nx = 1;
-		__supported_pte_mask &= ~_PAGE_NX;
-	}
-	return 0;
-}
-early_param("noexec", nonx_setup);
-
-int force_personality32;
-
-/* noexec32=on|off
-Control non executable heap for 32bit processes.
-To control the stack too use noexec=off
-
-on	PROT_READ does not imply PROT_EXEC for 32bit processes (default)
-off	PROT_READ implies PROT_EXEC
-*/
-static int __init nonx32_setup(char *str)
-{
-	if (!strcmp(str, "on"))
-		force_personality32 &= ~READ_IMPLIES_EXEC;
-	else if (!strcmp(str, "off"))
-		force_personality32 |= READ_IMPLIES_EXEC;
-	return 1;
-}
-__setup("noexec32=", nonx32_setup);
-
-void pda_init(int cpu)
-{
-	struct x8664_pda *pda = cpu_pda(cpu);
-
-	/* Setup up data that may be needed in __get_free_pages early */
-	loadsegment(fs, 0);
-	loadsegment(gs, 0);
-	/* Memory clobbers used to order PDA accessed */
-	mb();
-	wrmsrl(MSR_GS_BASE, pda);
-	mb();
-
-	pda->cpunumber = cpu;
-	pda->irqcount = -1;
-	pda->kernelstack = (unsigned long)stack_thread_info() -
-				 PDA_STACKOFFSET + THREAD_SIZE;
-	pda->active_mm = &init_mm;
-	pda->mmu_state = 0;
-
-	if (cpu == 0) {
-		/* others are initialized in smpboot.c */
-		pda->pcurrent = &init_task;
-		pda->irqstackptr = boot_cpu_stack;
-	} else {
-		pda->irqstackptr = (char *)
-			__get_free_pages(GFP_ATOMIC, IRQSTACK_ORDER);
-		if (!pda->irqstackptr)
-			panic("cannot allocate irqstack for cpu %d", cpu);
-
-		if (pda->nodenumber == 0 && cpu_to_node(cpu) != NUMA_NO_NODE)
-			pda->nodenumber = cpu_to_node(cpu);
-	}
-
-	pda->irqstackptr += IRQSTACKSIZE-64;
-}
-
-char boot_exception_stacks[(N_EXCEPTION_STACKS - 1) * EXCEPTION_STKSZ +
-			   DEBUG_STKSZ] __page_aligned_bss;
-
-extern asmlinkage void ignore_sysret(void);
-
-/* May not be marked __init: used by software suspend */
-void syscall_init(void)
-{
-	/*
-	 * LSTAR and STAR live in a bit strange symbiosis.
-	 * They both write to the same internal register. STAR allows to
-	 * set CS/DS but only a 32bit target. LSTAR sets the 64bit rip.
-	 */
-	wrmsrl(MSR_STAR,  ((u64)__USER32_CS)<<48  | ((u64)__KERNEL_CS)<<32);
-	wrmsrl(MSR_LSTAR, system_call);
-	wrmsrl(MSR_CSTAR, ignore_sysret);
-
-#ifdef CONFIG_IA32_EMULATION
-	syscall32_cpu_init();
-#endif
-
-	/* Flags to clear on syscall */
-	wrmsrl(MSR_SYSCALL_MASK,
-	       X86_EFLAGS_TF|X86_EFLAGS_DF|X86_EFLAGS_IF|X86_EFLAGS_IOPL);
-}
-
-void __cpuinit check_efer(void)
-{
-	unsigned long efer;
-
-	rdmsrl(MSR_EFER, efer);
-	if (!(efer & EFER_NX) || do_not_nx)
-		__supported_pte_mask &= ~_PAGE_NX;
-}
-
-unsigned long kernel_eflags;
-
-/*
- * Copies of the original ist values from the tss are only accessed during
- * debugging, no special alignment required.
- */
-DEFINE_PER_CPU(struct orig_ist, orig_ist);
-
-/*
- * cpu_init() initializes state that is per-CPU. Some data is already
- * initialized (naturally) in the bootstrap process, such as the GDT
- * and IDT. We reload them nevertheless, this function acts as a
- * 'CPU state barrier', nothing should get across.
- * A lot of state is already set up in PDA init.
- */
-void __cpuinit cpu_init(void)
-{
-	int cpu = stack_smp_processor_id();
-	struct tss_struct *t = &per_cpu(init_tss, cpu);
-	struct orig_ist *orig_ist = &per_cpu(orig_ist, cpu);
-	unsigned long v;
-	char *estacks = NULL;
-	struct task_struct *me;
-	int i;
-
-	/* CPU 0 is initialised in head64.c */
-	if (cpu != 0)
-		pda_init(cpu);
-	else
-		estacks = boot_exception_stacks;
-
-	me = current;
-
-	if (cpu_test_and_set(cpu, cpu_initialized))
-		panic("CPU#%d already initialized!\n", cpu);
-
-	printk(KERN_INFO "Initializing CPU#%d\n", cpu);
-
-	clear_in_cr4(X86_CR4_VME|X86_CR4_PVI|X86_CR4_TSD|X86_CR4_DE);
-
-	/*
-	 * Initialize the per-CPU GDT with the boot GDT,
-	 * and set up the GDT descriptor:
-	 */
-
-	switch_to_new_gdt();
-	load_idt((const struct desc_ptr *)&idt_descr);
-
-	memset(me->thread.tls_array, 0, GDT_ENTRY_TLS_ENTRIES * 8);
-	syscall_init();
-
-	wrmsrl(MSR_FS_BASE, 0);
-	wrmsrl(MSR_KERNEL_GS_BASE, 0);
-	barrier();
-
-	check_efer();
-
-	/*
-	 * set up and load the per-CPU TSS
-	 */
-	for (v = 0; v < N_EXCEPTION_STACKS; v++) {
-		static const unsigned int order[N_EXCEPTION_STACKS] = {
-			[0 ... N_EXCEPTION_STACKS - 1] = EXCEPTION_STACK_ORDER,
-			[DEBUG_STACK - 1] = DEBUG_STACK_ORDER
-		};
-		if (cpu) {
-			estacks = (char *)__get_free_pages(GFP_ATOMIC, order[v]);
-			if (!estacks)
-				panic("Cannot allocate exception stack %ld %d\n",
-				      v, cpu);
-		}
-		estacks += PAGE_SIZE << order[v];
-		orig_ist->ist[v] = t->x86_tss.ist[v] = (unsigned long)estacks;
-	}
-
-	t->x86_tss.io_bitmap_base = offsetof(struct tss_struct, io_bitmap);
-	/*
-	 * <= is required because the CPU will access up to
-	 * 8 bits beyond the end of the IO permission bitmap.
-	 */
-	for (i = 0; i <= IO_BITMAP_LONGS; i++)
-		t->io_bitmap[i] = ~0UL;
-
-	atomic_inc(&init_mm.mm_count);
-	me->active_mm = &init_mm;
-	if (me->mm)
-		BUG();
-	enter_lazy_tlb(&init_mm, me);
-
-	load_sp0(t, &current->thread);
-	set_tss_desc(cpu, t);
-	load_TR_desc();
-	load_LDT(&init_mm.context);
-
-#ifdef CONFIG_KGDB
-	/*
-	 * If the kgdb is connected no debug regs should be altered.  This
-	 * is only applicable when KGDB and a KGDB I/O module are built
-	 * into the kernel and you are using early debugging with
-	 * kgdbwait. KGDB will control the kernel HW breakpoint registers.
-	 */
-	if (kgdb_connected && arch_kgdb_ops.correct_hw_break)
-		arch_kgdb_ops.correct_hw_break();
-	else {
-#endif
-	/*
-	 * Clear all 6 debug registers:
-	 */
-
-	set_debugreg(0UL, 0);
-	set_debugreg(0UL, 1);
-	set_debugreg(0UL, 2);
-	set_debugreg(0UL, 3);
-	set_debugreg(0UL, 6);
-	set_debugreg(0UL, 7);
-#ifdef CONFIG_KGDB
-	/* If the kgdb is connected no debug regs should be altered. */
-	}
-#endif
-
-	fpu_init();
-
-	raw_local_save_flags(kernel_eflags);
-
-	if (is_uv_system())
-		uv_cpu_init();
-}
diff --git a/arch/x86/kernel/cpu/cpu.h b/arch/x86/kernel/cpu/cpu.h
index 4d894e8565fe..de4094a39210 100644
--- a/arch/x86/kernel/cpu/cpu.h
+++ b/arch/x86/kernel/cpu/cpu.h
@@ -21,23 +21,16 @@ struct cpu_dev {
 	void		(*c_init)(struct cpuinfo_x86 * c);
 	void		(*c_identify)(struct cpuinfo_x86 * c);
 	unsigned int	(*c_size_cache)(struct cpuinfo_x86 * c, unsigned int size);
+	int	c_x86_vendor;
 };
 
-extern struct cpu_dev * cpu_devs [X86_VENDOR_NUM];
+#define cpu_dev_register(cpu_devX) \
+	static struct cpu_dev *__cpu_dev_##cpu_devX __used \
+	__attribute__((__section__(".x86_cpu_dev.init"))) = \
+	&cpu_devX;
 
-struct cpu_vendor_dev {
-	int vendor;
-	struct cpu_dev *cpu_dev;
-};
-
-#define cpu_vendor_dev_register(cpu_vendor_id, cpu_dev) \
-	static struct cpu_vendor_dev __cpu_vendor_dev_##cpu_vendor_id __used \
-	__attribute__((__section__(".x86cpuvendor.init"))) = \
-	{ cpu_vendor_id, cpu_dev }
-
-extern struct cpu_vendor_dev __x86cpuvendor_start[], __x86cpuvendor_end[];
+extern struct cpu_dev *__x86_cpu_dev_start[], *__x86_cpu_dev_end[];
 
-extern int get_model_name(struct cpuinfo_x86 *c);
 extern void display_cacheinfo(struct cpuinfo_x86 *c);
 
 #endif
diff --git a/arch/x86/kernel/cpu/cpufreq/Kconfig b/arch/x86/kernel/cpu/cpufreq/Kconfig
index cb7a5715596d..efae3b22a0ff 100644
--- a/arch/x86/kernel/cpu/cpufreq/Kconfig
+++ b/arch/x86/kernel/cpu/cpufreq/Kconfig
@@ -235,9 +235,9 @@ config X86_LONGHAUL
 	  If in doubt, say N.
 
 config X86_E_POWERSAVER
-	tristate "VIA C7 Enhanced PowerSaver (EXPERIMENTAL)"
+	tristate "VIA C7 Enhanced PowerSaver"
 	select CPU_FREQ_TABLE
-	depends on X86_32 && EXPERIMENTAL
+	depends on X86_32
 	help
 	  This adds the CPUFreq driver for VIA C7 processors.
 
diff --git a/arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c b/arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c
index ff2fff56f0a8..dd097b835839 100644
--- a/arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c
+++ b/arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c
@@ -200,12 +200,10 @@ static void drv_read(struct drv_cmd *cmd)
 static void drv_write(struct drv_cmd *cmd)
 {
 	cpumask_t saved_mask = current->cpus_allowed;
-	cpumask_of_cpu_ptr_declare(cpu_mask);
 	unsigned int i;
 
 	for_each_cpu_mask_nr(i, cmd->mask) {
-		cpumask_of_cpu_ptr_next(cpu_mask, i);
-		set_cpus_allowed_ptr(current, cpu_mask);
+		set_cpus_allowed_ptr(current, &cpumask_of_cpu(i));
 		do_drv_write(cmd);
 	}
 
@@ -269,12 +267,11 @@ static unsigned int get_measured_perf(unsigned int cpu)
 	} aperf_cur, mperf_cur;
 
 	cpumask_t saved_mask;
-	cpumask_of_cpu_ptr(cpu_mask, cpu);
 	unsigned int perf_percent;
 	unsigned int retval;
 
 	saved_mask = current->cpus_allowed;
-	set_cpus_allowed_ptr(current, cpu_mask);
+	set_cpus_allowed_ptr(current, &cpumask_of_cpu(cpu));
 	if (get_cpu() != cpu) {
 		/* We were not able to run on requested processor */
 		put_cpu();
@@ -340,7 +337,6 @@ static unsigned int get_measured_perf(unsigned int cpu)
 
 static unsigned int get_cur_freq_on_cpu(unsigned int cpu)
 {
-	cpumask_of_cpu_ptr(cpu_mask, cpu);
 	struct acpi_cpufreq_data *data = per_cpu(drv_data, cpu);
 	unsigned int freq;
 	unsigned int cached_freq;
@@ -353,7 +349,7 @@ static unsigned int get_cur_freq_on_cpu(unsigned int cpu)
 	}
 
 	cached_freq = data->freq_table[data->acpi_data->state].frequency;
-	freq = extract_freq(get_cur_val(cpu_mask), data);
+	freq = extract_freq(get_cur_val(&cpumask_of_cpu(cpu)), data);
 	if (freq != cached_freq) {
 		/*
 		 * The dreaded BIOS frequency change behind our back.
diff --git a/arch/x86/kernel/cpu/cpufreq/elanfreq.c b/arch/x86/kernel/cpu/cpufreq/elanfreq.c
index 94619c22f563..e4a4bf870e94 100644
--- a/arch/x86/kernel/cpu/cpufreq/elanfreq.c
+++ b/arch/x86/kernel/cpu/cpufreq/elanfreq.c
@@ -44,7 +44,7 @@ struct s_elan_multiplier {
  * It is important that the frequencies
  * are listed in ascending order here!
  */
-struct s_elan_multiplier elan_multiplier[] = {
+static struct s_elan_multiplier elan_multiplier[] = {
 	{1000,	0x02,	0x18},
 	{2000,	0x02,	0x10},
 	{4000,	0x02,	0x08},
diff --git a/arch/x86/kernel/cpu/cpufreq/powernow-k8.c b/arch/x86/kernel/cpu/cpufreq/powernow-k8.c
index 53c7b6936973..84bb395038d8 100644
--- a/arch/x86/kernel/cpu/cpufreq/powernow-k8.c
+++ b/arch/x86/kernel/cpu/cpufreq/powernow-k8.c
@@ -66,7 +66,6 @@ static u32 find_freq_from_fid(u32 fid)
 	return 800 + (fid * 100);
 }
 
-
 /* Return a frequency in KHz, given an input fid */
 static u32 find_khz_freq_from_fid(u32 fid)
 {
@@ -78,7 +77,6 @@ static u32 find_khz_freq_from_pstate(struct cpufreq_frequency_table *data, u32 p
 	return data[pstate].frequency;
 }
 
-
 /* Return the vco fid for an input fid
  *
  * Each "low" fid has corresponding "high" fid, and you can get to "low" fids
@@ -166,7 +164,6 @@ static void fidvid_msr_init(void)
 	wrmsr(MSR_FIDVID_CTL, lo, hi);
 }
 
-
 /* write the new fid value along with the other control fields to the msr */
 static int write_new_fid(struct powernow_k8_data *data, u32 fid)
 {
@@ -479,12 +476,11 @@ static int core_voltage_post_transition(struct powernow_k8_data *data, u32 reqvi
 static int check_supported_cpu(unsigned int cpu)
 {
 	cpumask_t oldmask;
-	cpumask_of_cpu_ptr(cpu_mask, cpu);
 	u32 eax, ebx, ecx, edx;
 	unsigned int rc = 0;
 
 	oldmask = current->cpus_allowed;
-	set_cpus_allowed_ptr(current, cpu_mask);
+	set_cpus_allowed_ptr(current, &cpumask_of_cpu(cpu));
 
 	if (smp_processor_id() != cpu) {
 		printk(KERN_ERR PFX "limiting to cpu %u failed\n", cpu);
@@ -1017,7 +1013,6 @@ static int transition_frequency_pstate(struct powernow_k8_data *data, unsigned i
 static int powernowk8_target(struct cpufreq_policy *pol, unsigned targfreq, unsigned relation)
 {
 	cpumask_t oldmask;
-	cpumask_of_cpu_ptr(cpu_mask, pol->cpu);
 	struct powernow_k8_data *data = per_cpu(powernow_data, pol->cpu);
 	u32 checkfid;
 	u32 checkvid;
@@ -1032,7 +1027,7 @@ static int powernowk8_target(struct cpufreq_policy *pol, unsigned targfreq, unsi
 
 	/* only run on specific CPU from here on */
 	oldmask = current->cpus_allowed;
-	set_cpus_allowed_ptr(current, cpu_mask);
+	set_cpus_allowed_ptr(current, &cpumask_of_cpu(pol->cpu));
 
 	if (smp_processor_id() != pol->cpu) {
 		printk(KERN_ERR PFX "limiting to cpu %u failed\n", pol->cpu);
@@ -1107,7 +1102,6 @@ static int __cpuinit powernowk8_cpu_init(struct cpufreq_policy *pol)
 {
 	struct powernow_k8_data *data;
 	cpumask_t oldmask;
-	cpumask_of_cpu_ptr_declare(newmask);
 	int rc;
 
 	if (!cpu_online(pol->cpu))
@@ -1159,8 +1153,7 @@ static int __cpuinit powernowk8_cpu_init(struct cpufreq_policy *pol)
 
 	/* only run on specific CPU from here on */
 	oldmask = current->cpus_allowed;
-	cpumask_of_cpu_ptr_next(newmask, pol->cpu);
-	set_cpus_allowed_ptr(current, newmask);
+	set_cpus_allowed_ptr(current, &cpumask_of_cpu(pol->cpu));
 
 	if (smp_processor_id() != pol->cpu) {
 		printk(KERN_ERR PFX "limiting to cpu %u failed\n", pol->cpu);
@@ -1182,7 +1175,7 @@ static int __cpuinit powernowk8_cpu_init(struct cpufreq_policy *pol)
 	set_cpus_allowed_ptr(current, &oldmask);
 
 	if (cpu_family == CPU_HW_PSTATE)
-		pol->cpus = *newmask;
+		pol->cpus = cpumask_of_cpu(pol->cpu);
 	else
 		pol->cpus = per_cpu(cpu_core_map, pol->cpu);
 	data->available_cores = &(pol->cpus);
@@ -1248,7 +1241,6 @@ static unsigned int powernowk8_get (unsigned int cpu)
 {
 	struct powernow_k8_data *data;
 	cpumask_t oldmask = current->cpus_allowed;
-	cpumask_of_cpu_ptr(newmask, cpu);
 	unsigned int khz = 0;
 	unsigned int first;
 
@@ -1258,7 +1250,7 @@ static unsigned int powernowk8_get (unsigned int cpu)
 	if (!data)
 		return -EINVAL;
 
-	set_cpus_allowed_ptr(current, newmask);
+	set_cpus_allowed_ptr(current, &cpumask_of_cpu(cpu));
 	if (smp_processor_id() != cpu) {
 		printk(KERN_ERR PFX
 			"limiting to CPU %d failed in powernowk8_get\n", cpu);
diff --git a/arch/x86/kernel/cpu/cpufreq/speedstep-centrino.c b/arch/x86/kernel/cpu/cpufreq/speedstep-centrino.c
index ca2ac13b7af2..15e13c01cc36 100644
--- a/arch/x86/kernel/cpu/cpufreq/speedstep-centrino.c
+++ b/arch/x86/kernel/cpu/cpufreq/speedstep-centrino.c
@@ -324,10 +324,9 @@ static unsigned int get_cur_freq(unsigned int cpu)
 	unsigned l, h;
 	unsigned clock_freq;
 	cpumask_t saved_mask;
-	cpumask_of_cpu_ptr(new_mask, cpu);
 
 	saved_mask = current->cpus_allowed;
-	set_cpus_allowed_ptr(current, new_mask);
+	set_cpus_allowed_ptr(current, &cpumask_of_cpu(cpu));
 	if (smp_processor_id() != cpu)
 		return 0;
 
@@ -585,15 +584,12 @@ static int centrino_target (struct cpufreq_policy *policy,
 		 * Best effort undo..
 		 */
 
-		if (!cpus_empty(*covered_cpus)) {
-			cpumask_of_cpu_ptr_declare(new_mask);
-
+		if (!cpus_empty(*covered_cpus))
 			for_each_cpu_mask_nr(j, *covered_cpus) {
-				cpumask_of_cpu_ptr_next(new_mask, j);
-				set_cpus_allowed_ptr(current, new_mask);
+				set_cpus_allowed_ptr(current,
+						     &cpumask_of_cpu(j));
 				wrmsr(MSR_IA32_PERF_CTL, oldmsr, h);
 			}
-		}
 
 		tmp = freqs.new;
 		freqs.new = freqs.old;
diff --git a/arch/x86/kernel/cpu/cpufreq/speedstep-ich.c b/arch/x86/kernel/cpu/cpufreq/speedstep-ich.c
index 2f3728dc24f6..191f7263c61d 100644
--- a/arch/x86/kernel/cpu/cpufreq/speedstep-ich.c
+++ b/arch/x86/kernel/cpu/cpufreq/speedstep-ich.c
@@ -244,8 +244,7 @@ static unsigned int _speedstep_get(const cpumask_t *cpus)
 
 static unsigned int speedstep_get(unsigned int cpu)
 {
-	cpumask_of_cpu_ptr(newmask, cpu);
-	return _speedstep_get(newmask);
+	return _speedstep_get(&cpumask_of_cpu(cpu));
 }
 
 /**
diff --git a/arch/x86/kernel/cpu/cyrix.c b/arch/x86/kernel/cpu/cyrix.c
index 3fd7a67bb06a..ffd0f5ed071a 100644
--- a/arch/x86/kernel/cpu/cyrix.c
+++ b/arch/x86/kernel/cpu/cyrix.c
@@ -15,13 +15,11 @@
 /*
  * Read NSC/Cyrix DEVID registers (DIR) to get more detailed info. about the CPU
  */
-static void __cpuinit do_cyrix_devid(unsigned char *dir0, unsigned char *dir1)
+static void __cpuinit __do_cyrix_devid(unsigned char *dir0, unsigned char *dir1)
 {
 	unsigned char ccr2, ccr3;
-	unsigned long flags;
 
 	/* we test for DEVID by checking whether CCR3 is writable */
-	local_irq_save(flags);
 	ccr3 = getCx86(CX86_CCR3);
 	setCx86(CX86_CCR3, ccr3 ^ 0x80);
 	getCx86(0xc0);   /* dummy to change bus */
@@ -44,9 +42,16 @@ static void __cpuinit do_cyrix_devid(unsigned char *dir0, unsigned char *dir1)
 		*dir0 = getCx86(CX86_DIR0);
 		*dir1 = getCx86(CX86_DIR1);
 	}
-	local_irq_restore(flags);
 }
 
+static void __cpuinit do_cyrix_devid(unsigned char *dir0, unsigned char *dir1)
+{
+	unsigned long flags;
+
+	local_irq_save(flags);
+	__do_cyrix_devid(dir0, dir1);
+	local_irq_restore(flags);
+}
 /*
  * Cx86_dir0_msb is a HACK needed by check_cx686_cpuid/slop in bugs.h in
  * order to identify the Cyrix CPU model after we're out of setup.c
@@ -116,7 +121,7 @@ static void __cpuinit set_cx86_reorder(void)
 	setCx86(CX86_CCR3, (ccr3 & 0x0f) | 0x10); /* enable MAPEN */
 
 	/* Load/Store Serialize to mem access disable (=reorder it) */
-	setCx86(CX86_PCR0, getCx86(CX86_PCR0) & ~0x80);
+	setCx86_old(CX86_PCR0, getCx86_old(CX86_PCR0) & ~0x80);
 	/* set load/store serialize from 1GB to 4GB */
 	ccr3 |= 0xe0;
 	setCx86(CX86_CCR3, ccr3);
@@ -127,28 +132,11 @@ static void __cpuinit set_cx86_memwb(void)
 	printk(KERN_INFO "Enable Memory-Write-back mode on Cyrix/NSC processor.\n");
 
 	/* CCR2 bit 2: unlock NW bit */
-	setCx86(CX86_CCR2, getCx86(CX86_CCR2) & ~0x04);
+	setCx86_old(CX86_CCR2, getCx86_old(CX86_CCR2) & ~0x04);
 	/* set 'Not Write-through' */
 	write_cr0(read_cr0() | X86_CR0_NW);
 	/* CCR2 bit 2: lock NW bit and set WT1 */
-	setCx86(CX86_CCR2, getCx86(CX86_CCR2) | 0x14);
-}
-
-static void __cpuinit set_cx86_inc(void)
-{
-	unsigned char ccr3;
-
-	printk(KERN_INFO "Enable Incrementor on Cyrix/NSC processor.\n");
-
-	ccr3 = getCx86(CX86_CCR3);
-	setCx86(CX86_CCR3, (ccr3 & 0x0f) | 0x10); /* enable MAPEN */
-	/* PCR1 -- Performance Control */
-	/* Incrementor on, whatever that is */
-	setCx86(CX86_PCR1, getCx86(CX86_PCR1) | 0x02);
-	/* PCR0 -- Performance Control */
-	/* Incrementor Margin 10 */
-	setCx86(CX86_PCR0, getCx86(CX86_PCR0) | 0x04);
-	setCx86(CX86_CCR3, ccr3);	/* disable MAPEN */
+	setCx86_old(CX86_CCR2, getCx86_old(CX86_CCR2) | 0x14);
 }
 
 /*
@@ -162,23 +150,40 @@ static void __cpuinit geode_configure(void)
 	local_irq_save(flags);
 
 	/* Suspend on halt power saving and enable #SUSP pin */
-	setCx86(CX86_CCR2, getCx86(CX86_CCR2) | 0x88);
+	setCx86_old(CX86_CCR2, getCx86_old(CX86_CCR2) | 0x88);
 
 	ccr3 = getCx86(CX86_CCR3);
 	setCx86(CX86_CCR3, (ccr3 & 0x0f) | 0x10);	/* enable MAPEN */
 
 
 	/* FPU fast, DTE cache, Mem bypass */
-	setCx86(CX86_CCR4, getCx86(CX86_CCR4) | 0x38);
+	setCx86_old(CX86_CCR4, getCx86_old(CX86_CCR4) | 0x38);
 	setCx86(CX86_CCR3, ccr3);			/* disable MAPEN */
 
 	set_cx86_memwb();
 	set_cx86_reorder();
-	set_cx86_inc();
 
 	local_irq_restore(flags);
 }
 
+static void __cpuinit early_init_cyrix(struct cpuinfo_x86 *c)
+{
+	unsigned char dir0, dir0_msn, dir1 = 0;
+
+	__do_cyrix_devid(&dir0, &dir1);
+	dir0_msn = dir0 >> 4; /* identifies CPU "family"   */
+
+	switch (dir0_msn) {
+	case 3: /* 6x86/6x86L */
+		/* Emulate MTRRs using Cyrix's ARRs. */
+		set_cpu_cap(c, X86_FEATURE_CYRIX_ARR);
+		break;
+	case 5: /* 6x86MX/M II */
+		/* Emulate MTRRs using Cyrix's ARRs. */
+		set_cpu_cap(c, X86_FEATURE_CYRIX_ARR);
+		break;
+	}
+}
 
 static void __cpuinit init_cyrix(struct cpuinfo_x86 *c)
 {
@@ -286,7 +291,7 @@ static void __cpuinit init_cyrix(struct cpuinfo_x86 *c)
 		/* GXm supports extended cpuid levels 'ala' AMD */
 		if (c->cpuid_level == 2) {
 			/* Enable cxMMX extensions (GX1 Datasheet 54) */
-			setCx86(CX86_CCR7, getCx86(CX86_CCR7) | 1);
+			setCx86_old(CX86_CCR7, getCx86_old(CX86_CCR7) | 1);
 
 			/*
 			 * GXm : 0x30 ... 0x5f GXm  datasheet 51
@@ -296,7 +301,6 @@ static void __cpuinit init_cyrix(struct cpuinfo_x86 *c)
 			 */
 			if ((0x30 <= dir1 && dir1 <= 0x6f) || (0x80 <= dir1 && dir1 <= 0x8f))
 				geode_configure();
-			get_model_name(c);  /* get CPU marketing name */
 			return;
 		} else { /* MediaGX */
 			Cx86_cb[2] = (dir0_lsn & 1) ? '3' : '4';
@@ -309,7 +313,7 @@ static void __cpuinit init_cyrix(struct cpuinfo_x86 *c)
 		if (dir1 > 7) {
 			dir0_msn++;  /* M II */
 			/* Enable MMX extensions (App note 108) */
-			setCx86(CX86_CCR7, getCx86(CX86_CCR7)|1);
+			setCx86_old(CX86_CCR7, getCx86_old(CX86_CCR7)|1);
 		} else {
 			c->coma_bug = 1;      /* 6x86MX, it has the bug. */
 		}
@@ -424,7 +428,7 @@ static void __cpuinit cyrix_identify(struct cpuinfo_x86 *c)
 			local_irq_save(flags);
 			ccr3 = getCx86(CX86_CCR3);
 			setCx86(CX86_CCR3, (ccr3 & 0x0f) | 0x10);       /* enable MAPEN  */
-			setCx86(CX86_CCR4, getCx86(CX86_CCR4) | 0x80);  /* enable cpuid  */
+			setCx86_old(CX86_CCR4, getCx86_old(CX86_CCR4) | 0x80);  /* enable cpuid  */
 			setCx86(CX86_CCR3, ccr3);                       /* disable MAPEN */
 			local_irq_restore(flags);
 		}
@@ -434,16 +438,19 @@ static void __cpuinit cyrix_identify(struct cpuinfo_x86 *c)
 static struct cpu_dev cyrix_cpu_dev __cpuinitdata = {
 	.c_vendor	= "Cyrix",
 	.c_ident	= { "CyrixInstead" },
+	.c_early_init	= early_init_cyrix,
 	.c_init		= init_cyrix,
 	.c_identify	= cyrix_identify,
+	.c_x86_vendor	= X86_VENDOR_CYRIX,
 };
 
-cpu_vendor_dev_register(X86_VENDOR_CYRIX, &cyrix_cpu_dev);
+cpu_dev_register(cyrix_cpu_dev);
 
 static struct cpu_dev nsc_cpu_dev __cpuinitdata = {
 	.c_vendor	= "NSC",
 	.c_ident	= { "Geode by NSC" },
 	.c_init		= init_nsc,
+	.c_x86_vendor	= X86_VENDOR_NSC,
 };
 
-cpu_vendor_dev_register(X86_VENDOR_NSC, &nsc_cpu_dev);
+cpu_dev_register(nsc_cpu_dev);
diff --git a/arch/x86/kernel/cpu/feature_names.c b/arch/x86/kernel/cpu/feature_names.c
deleted file mode 100644
index e43ad4ad4cba..000000000000
--- a/arch/x86/kernel/cpu/feature_names.c
+++ /dev/null
@@ -1,83 +0,0 @@
-/*
- * Strings for the various x86 capability flags.
- *
- * This file must not contain any executable code.
- */
-
-#include <asm/cpufeature.h>
-
-/*
- * These flag bits must match the definitions in <asm/cpufeature.h>.
- * NULL means this bit is undefined or reserved; either way it doesn't
- * have meaning as far as Linux is concerned.  Note that it's important
- * to realize there is a difference between this table and CPUID -- if
- * applications want to get the raw CPUID data, they should access
- * /dev/cpu/<cpu_nr>/cpuid instead.
- */
-const char * const x86_cap_flags[NCAPINTS*32] = {
-	/* Intel-defined */
-	"fpu", "vme", "de", "pse", "tsc", "msr", "pae", "mce",
-	"cx8", "apic", NULL, "sep", "mtrr", "pge", "mca", "cmov",
-	"pat", "pse36", "pn", "clflush", NULL, "dts", "acpi", "mmx",
-	"fxsr", "sse", "sse2", "ss", "ht", "tm", "ia64", "pbe",
-
-	/* AMD-defined */
-	NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,
-	NULL, NULL, NULL, "syscall", NULL, NULL, NULL, NULL,
-	NULL, NULL, NULL, "mp", "nx", NULL, "mmxext", NULL,
-	NULL, "fxsr_opt", "pdpe1gb", "rdtscp", NULL, "lm",
-	"3dnowext", "3dnow",
-
-	/* Transmeta-defined */
-	"recovery", "longrun", NULL, "lrti", NULL, NULL, NULL, NULL,
-	NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,
-	NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,
-	NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,
-
-	/* Other (Linux-defined) */
-	"cxmmx", "k6_mtrr", "cyrix_arr", "centaur_mcr",
-	NULL, NULL, NULL, NULL,
-	"constant_tsc", "up", NULL, "arch_perfmon",
-	"pebs", "bts", NULL, NULL,
-	"rep_good", NULL, NULL, NULL, NULL, NULL, NULL, NULL,
-	NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,
-
-	/* Intel-defined (#2) */
-	"pni", NULL, NULL, "monitor", "ds_cpl", "vmx", "smx", "est",
-	"tm2", "ssse3", "cid", NULL, NULL, "cx16", "xtpr", NULL,
-	NULL, NULL, "dca", "sse4_1", "sse4_2", NULL, NULL, "popcnt",
-	NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,
-
-	/* VIA/Cyrix/Centaur-defined */
-	NULL, NULL, "rng", "rng_en", NULL, NULL, "ace", "ace_en",
-	"ace2", "ace2_en", "phe", "phe_en", "pmm", "pmm_en", NULL, NULL,
-	NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,
-	NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,
-
-	/* AMD-defined (#2) */
-	"lahf_lm", "cmp_legacy", "svm", "extapic",
-	"cr8_legacy", "abm", "sse4a", "misalignsse",
-	"3dnowprefetch", "osvw", "ibs", "sse5",
-	"skinit", "wdt", NULL, NULL,
-	NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,
-	NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,
-
-	/* Auxiliary (Linux-defined) */
-	"ida", NULL, NULL, NULL, NULL, NULL, NULL, NULL,
-	NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,
-	NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,
-	NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,
-};
-
-const char *const x86_power_flags[32] = {
-	"ts",	/* temperature sensor */
-	"fid",  /* frequency id control */
-	"vid",  /* voltage id control */
-	"ttp",  /* thermal trip */
-	"tm",
-	"stc",
-	"100mhzsteps",
-	"hwpstate",
-	"",	/* tsc invariant mapped to constant_tsc */
-		/* nothing */
-};
diff --git a/arch/x86/kernel/cpu/intel.c b/arch/x86/kernel/cpu/intel.c
index f113ef4595f6..a66989586a84 100644
--- a/arch/x86/kernel/cpu/intel.c
+++ b/arch/x86/kernel/cpu/intel.c
@@ -23,13 +23,6 @@
 #include <mach_apic.h>
 #endif
 
-#ifdef CONFIG_X86_INTEL_USERCOPY
-/*
- * Alignment at which movsl is preferred for bulk memory copies.
- */
-struct movsl_mask movsl_mask __read_mostly;
-#endif
-
 static void __cpuinit early_init_intel(struct cpuinfo_x86 *c)
 {
 	/* Netburst reports 64 bytes clflush size, but does IO in 128 bytes */
@@ -83,7 +76,7 @@ static void __cpuinit Intel_errata_workarounds(struct cpuinfo_x86 *c)
 /*
  * find out the number of processor cores on the die
  */
-static int __cpuinit num_cpu_cores(struct cpuinfo_x86 *c)
+static int __cpuinit intel_num_cpu_cores(struct cpuinfo_x86 *c)
 {
 	unsigned int eax, ebx, ecx, edx;
 
@@ -183,9 +176,16 @@ static void __cpuinit init_intel(struct cpuinfo_x86 *c)
 	if (p)
 		strcpy(c->x86_model_id, p);
 
-	c->x86_max_cores = num_cpu_cores(c);
+	detect_extended_topology(c);
 
-	detect_ht(c);
+	if (!cpu_has(c, X86_FEATURE_XTOPOLOGY)) {
+		/*
+		 * let's use the legacy cpuid vector 0x1 and 0x4 for topology
+		 * detection.
+		 */
+		c->x86_max_cores = intel_num_cpu_cores(c);
+		detect_ht(c);
+	}
 
 	/* Work around errata */
 	Intel_errata_workarounds(c);
@@ -210,9 +210,8 @@ static void __cpuinit init_intel(struct cpuinfo_x86 *c)
 
 	if (cpu_has_xmm2)
 		set_cpu_cap(c, X86_FEATURE_LFENCE_RDTSC);
-	if (c->x86 == 15) {
+	if (c->x86 == 15)
 		set_cpu_cap(c, X86_FEATURE_P4);
-	}
 	if (c->x86 == 6)
 		set_cpu_cap(c, X86_FEATURE_P3);
 	if (cpu_has_ds) {
@@ -311,73 +310,10 @@ static struct cpu_dev intel_cpu_dev __cpuinitdata = {
 	.c_early_init   = early_init_intel,
 	.c_init		= init_intel,
 	.c_size_cache	= intel_size_cache,
+	.c_x86_vendor	= X86_VENDOR_INTEL,
 };
 
-cpu_vendor_dev_register(X86_VENDOR_INTEL, &intel_cpu_dev);
-
-#ifndef CONFIG_X86_CMPXCHG
-unsigned long cmpxchg_386_u8(volatile void *ptr, u8 old, u8 new)
-{
-	u8 prev;
-	unsigned long flags;
-
-	/* Poor man's cmpxchg for 386. Unsuitable for SMP */
-	local_irq_save(flags);
-	prev = *(u8 *)ptr;
-	if (prev == old)
-		*(u8 *)ptr = new;
-	local_irq_restore(flags);
-	return prev;
-}
-EXPORT_SYMBOL(cmpxchg_386_u8);
-
-unsigned long cmpxchg_386_u16(volatile void *ptr, u16 old, u16 new)
-{
-	u16 prev;
-	unsigned long flags;
-
-	/* Poor man's cmpxchg for 386. Unsuitable for SMP */
-	local_irq_save(flags);
-	prev = *(u16 *)ptr;
-	if (prev == old)
-		*(u16 *)ptr = new;
-	local_irq_restore(flags);
-	return prev;
-}
-EXPORT_SYMBOL(cmpxchg_386_u16);
-
-unsigned long cmpxchg_386_u32(volatile void *ptr, u32 old, u32 new)
-{
-	u32 prev;
-	unsigned long flags;
-
-	/* Poor man's cmpxchg for 386. Unsuitable for SMP */
-	local_irq_save(flags);
-	prev = *(u32 *)ptr;
-	if (prev == old)
-		*(u32 *)ptr = new;
-	local_irq_restore(flags);
-	return prev;
-}
-EXPORT_SYMBOL(cmpxchg_386_u32);
-#endif
-
-#ifndef CONFIG_X86_CMPXCHG64
-unsigned long long cmpxchg_486_u64(volatile void *ptr, u64 old, u64 new)
-{
-	u64 prev;
-	unsigned long flags;
-
-	/* Poor man's cmpxchg8b for 386 and 486. Unsuitable for SMP */
-	local_irq_save(flags);
-	prev = *(u64 *)ptr;
-	if (prev == old)
-		*(u64 *)ptr = new;
-	local_irq_restore(flags);
-	return prev;
-}
-EXPORT_SYMBOL(cmpxchg_486_u64);
-#endif
+cpu_dev_register(intel_cpu_dev);
 
 /* arch_initcall(intel_cpu_init); */
 
diff --git a/arch/x86/kernel/cpu/intel_64.c b/arch/x86/kernel/cpu/intel_64.c
index 1019c58d39f0..aef4f2826313 100644
--- a/arch/x86/kernel/cpu/intel_64.c
+++ b/arch/x86/kernel/cpu/intel_64.c
@@ -54,6 +54,8 @@ static void __cpuinit srat_detect_node(void)
 
 static void __cpuinit init_intel(struct cpuinfo_x86 *c)
 {
+	early_init_intel(c);
+
 	init_intel_cacheinfo(c);
 	if (c->cpuid_level > 9) {
 		unsigned eax = cpuid_eax(10);
@@ -69,18 +71,19 @@ static void __cpuinit init_intel(struct cpuinfo_x86 *c)
 			set_cpu_cap(c, X86_FEATURE_BTS);
 		if (!(l1 & (1<<12)))
 			set_cpu_cap(c, X86_FEATURE_PEBS);
-	}
-
-
-	if (cpu_has_bts)
 		ds_init_intel(c);
+	}
 
 	if (c->x86 == 15)
 		c->x86_cache_alignment = c->x86_clflush_size * 2;
 	if (c->x86 == 6)
 		set_cpu_cap(c, X86_FEATURE_REP_GOOD);
-	set_cpu_cap(c, X86_FEATURE_LFENCE_RDTSC);
-	c->x86_max_cores = intel_num_cpu_cores(c);
+	if (cpu_has_xmm2)
+		set_cpu_cap(c, X86_FEATURE_LFENCE_RDTSC);
+
+	detect_extended_topology(c);
+	if (!cpu_has(c, X86_FEATURE_XTOPOLOGY))
+		c->x86_max_cores = intel_num_cpu_cores(c);
 
 	srat_detect_node();
 }
@@ -90,6 +93,7 @@ static struct cpu_dev intel_cpu_dev __cpuinitdata = {
 	.c_ident	= { "GenuineIntel" },
 	.c_early_init   = early_init_intel,
 	.c_init		= init_intel,
+	.c_x86_vendor	= X86_VENDOR_INTEL,
 };
-cpu_vendor_dev_register(X86_VENDOR_INTEL, &intel_cpu_dev);
 
+cpu_dev_register(intel_cpu_dev);
diff --git a/arch/x86/kernel/cpu/intel_cacheinfo.c b/arch/x86/kernel/cpu/intel_cacheinfo.c
index 650d40f7912b..3f46afbb1cf1 100644
--- a/arch/x86/kernel/cpu/intel_cacheinfo.c
+++ b/arch/x86/kernel/cpu/intel_cacheinfo.c
@@ -1,8 +1,8 @@
 /*
- *      Routines to indentify caches on Intel CPU.
+ *	Routines to indentify caches on Intel CPU.
  *
- *      Changes:
- *      Venkatesh Pallipadi	: Adding cache identification through cpuid(4)
+ *	Changes:
+ *	Venkatesh Pallipadi	: Adding cache identification through cpuid(4)
  *		Ashok Raj <ashok.raj@intel.com>: Work with CPU hotplug infrastructure.
  *	Andi Kleen / Andreas Herrmann	: CPUID4 emulation on AMD.
  */
@@ -13,6 +13,7 @@
 #include <linux/compiler.h>
 #include <linux/cpu.h>
 #include <linux/sched.h>
+#include <linux/pci.h>
 
 #include <asm/processor.h>
 #include <asm/smp.h>
@@ -130,9 +131,18 @@ struct _cpuid4_info {
 	union _cpuid4_leaf_ebx ebx;
 	union _cpuid4_leaf_ecx ecx;
 	unsigned long size;
+	unsigned long can_disable;
 	cpumask_t shared_cpu_map;	/* future?: only cpus/node is needed */
 };
 
+#ifdef CONFIG_PCI
+static struct pci_device_id k8_nb_id[] = {
+	{ PCI_DEVICE(PCI_VENDOR_ID_AMD, 0x1103) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_AMD, 0x1203) },
+	{}
+};
+#endif
+
 unsigned short			num_cache_leaves;
 
 /* AMD doesn't have CPUID4. Emulate it here to report the same
@@ -182,9 +192,10 @@ static unsigned short assocs[] __cpuinitdata = {
 static unsigned char levels[] __cpuinitdata = { 1, 1, 2, 3 };
 static unsigned char types[] __cpuinitdata = { 1, 2, 3, 3 };
 
-static void __cpuinit amd_cpuid4(int leaf, union _cpuid4_leaf_eax *eax,
-		       union _cpuid4_leaf_ebx *ebx,
-		       union _cpuid4_leaf_ecx *ecx)
+static void __cpuinit
+amd_cpuid4(int leaf, union _cpuid4_leaf_eax *eax,
+		     union _cpuid4_leaf_ebx *ebx,
+		     union _cpuid4_leaf_ecx *ecx)
 {
 	unsigned dummy;
 	unsigned line_size, lines_per_tag, assoc, size_in_kb;
@@ -251,27 +262,40 @@ static void __cpuinit amd_cpuid4(int leaf, union _cpuid4_leaf_eax *eax,
 		(ebx->split.ways_of_associativity + 1) - 1;
 }
 
-static int __cpuinit cpuid4_cache_lookup(int index, struct _cpuid4_info *this_leaf)
+static void __cpuinit
+amd_check_l3_disable(int index, struct _cpuid4_info *this_leaf)
+{
+	if (index < 3)
+		return;
+	this_leaf->can_disable = 1;
+}
+
+static int
+__cpuinit cpuid4_cache_lookup(int index, struct _cpuid4_info *this_leaf)
 {
 	union _cpuid4_leaf_eax 	eax;
 	union _cpuid4_leaf_ebx 	ebx;
 	union _cpuid4_leaf_ecx 	ecx;
 	unsigned		edx;
 
-	if (boot_cpu_data.x86_vendor == X86_VENDOR_AMD)
+	if (boot_cpu_data.x86_vendor == X86_VENDOR_AMD) {
 		amd_cpuid4(index, &eax, &ebx, &ecx);
-	else
-		cpuid_count(4, index, &eax.full, &ebx.full, &ecx.full,  &edx);
+		if (boot_cpu_data.x86 >= 0x10)
+			amd_check_l3_disable(index, this_leaf);
+	} else {
+		cpuid_count(4, index, &eax.full, &ebx.full, &ecx.full, &edx);
+	}
+
 	if (eax.split.type == CACHE_TYPE_NULL)
 		return -EIO; /* better error ? */
 
 	this_leaf->eax = eax;
 	this_leaf->ebx = ebx;
 	this_leaf->ecx = ecx;
-	this_leaf->size = (ecx.split.number_of_sets + 1) *
-		(ebx.split.coherency_line_size + 1) *
-		(ebx.split.physical_line_partition + 1) *
-		(ebx.split.ways_of_associativity + 1);
+	this_leaf->size = (ecx.split.number_of_sets          + 1) *
+			  (ebx.split.coherency_line_size     + 1) *
+			  (ebx.split.physical_line_partition + 1) *
+			  (ebx.split.ways_of_associativity   + 1);
 	return 0;
 }
 
@@ -453,7 +477,7 @@ unsigned int __cpuinit init_intel_cacheinfo(struct cpuinfo_x86 *c)
 
 /* pointer to _cpuid4_info array (for each cache leaf) */
 static DEFINE_PER_CPU(struct _cpuid4_info *, cpuid4_info);
-#define CPUID4_INFO_IDX(x, y)    (&((per_cpu(cpuid4_info, x))[y]))
+#define CPUID4_INFO_IDX(x, y)	(&((per_cpu(cpuid4_info, x))[y]))
 
 #ifdef CONFIG_SMP
 static void __cpuinit cache_shared_cpu_map_setup(unsigned int cpu, int index)
@@ -490,7 +514,7 @@ static void __cpuinit cache_remove_shared_cpu_map(unsigned int cpu, int index)
 
 	this_leaf = CPUID4_INFO_IDX(cpu, index);
 	for_each_cpu_mask_nr(sibling, this_leaf->shared_cpu_map) {
-		sibling_leaf = CPUID4_INFO_IDX(sibling, index);	
+		sibling_leaf = CPUID4_INFO_IDX(sibling, index);
 		cpu_clear(cpu, sibling_leaf->shared_cpu_map);
 	}
 }
@@ -516,7 +540,6 @@ static int __cpuinit detect_cache_attributes(unsigned int cpu)
 	unsigned long		j;
 	int			retval;
 	cpumask_t		oldmask;
-	cpumask_of_cpu_ptr(newmask, cpu);
 
 	if (num_cache_leaves == 0)
 		return -ENOENT;
@@ -527,7 +550,7 @@ static int __cpuinit detect_cache_attributes(unsigned int cpu)
 		return -ENOMEM;
 
 	oldmask = current->cpus_allowed;
-	retval = set_cpus_allowed_ptr(current, newmask);
+	retval = set_cpus_allowed_ptr(current, &cpumask_of_cpu(cpu));
 	if (retval)
 		goto out;
 
@@ -573,7 +596,7 @@ struct _index_kobject {
 
 /* pointer to array of kobjects for cpuX/cache/indexY */
 static DEFINE_PER_CPU(struct _index_kobject *, index_kobject);
-#define INDEX_KOBJECT_PTR(x, y)    (&((per_cpu(index_kobject, x))[y]))
+#define INDEX_KOBJECT_PTR(x, y)		(&((per_cpu(index_kobject, x))[y]))
 
 #define show_one_plus(file_name, object, val)				\
 static ssize_t show_##file_name						\
@@ -638,6 +661,99 @@ static ssize_t show_type(struct _cpuid4_info *this_leaf, char *buf) {
 	}
 }
 
+#define to_object(k)	container_of(k, struct _index_kobject, kobj)
+#define to_attr(a)	container_of(a, struct _cache_attr, attr)
+
+#ifdef CONFIG_PCI
+static struct pci_dev *get_k8_northbridge(int node)
+{
+	struct pci_dev *dev = NULL;
+	int i;
+
+	for (i = 0; i <= node; i++) {
+		do {
+			dev = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, dev);
+			if (!dev)
+				break;
+		} while (!pci_match_id(&k8_nb_id[0], dev));
+		if (!dev)
+			break;
+	}
+	return dev;
+}
+#else
+static struct pci_dev *get_k8_northbridge(int node)
+{
+	return NULL;
+}
+#endif
+
+static ssize_t show_cache_disable(struct _cpuid4_info *this_leaf, char *buf)
+{
+	int node = cpu_to_node(first_cpu(this_leaf->shared_cpu_map));
+	struct pci_dev *dev = NULL;
+	ssize_t ret = 0;
+	int i;
+
+	if (!this_leaf->can_disable)
+		return sprintf(buf, "Feature not enabled\n");
+
+	dev = get_k8_northbridge(node);
+	if (!dev) {
+		printk(KERN_ERR "Attempting AMD northbridge operation on a system with no northbridge\n");
+		return -EINVAL;
+	}
+
+	for (i = 0; i < 2; i++) {
+		unsigned int reg;
+
+		pci_read_config_dword(dev, 0x1BC + i * 4, &reg);
+
+		ret += sprintf(buf, "%sEntry: %d\n", buf, i);
+		ret += sprintf(buf, "%sReads:  %s\tNew Entries: %s\n",  
+			buf,
+			reg & 0x80000000 ? "Disabled" : "Allowed",
+			reg & 0x40000000 ? "Disabled" : "Allowed");
+		ret += sprintf(buf, "%sSubCache: %x\tIndex: %x\n",
+			buf, (reg & 0x30000) >> 16, reg & 0xfff);
+	}
+	return ret;
+}
+
+static ssize_t
+store_cache_disable(struct _cpuid4_info *this_leaf, const char *buf,
+		    size_t count)
+{
+	int node = cpu_to_node(first_cpu(this_leaf->shared_cpu_map));
+	struct pci_dev *dev = NULL;
+	unsigned int ret, index, val;
+
+	if (!this_leaf->can_disable)
+		return 0;
+
+	if (strlen(buf) > 15)
+		return -EINVAL;
+
+	ret = sscanf(buf, "%x %x", &index, &val);
+	if (ret != 2)
+		return -EINVAL;
+	if (index > 1)
+		return -EINVAL;
+
+	val |= 0xc0000000;
+	dev = get_k8_northbridge(node);
+	if (!dev) {
+		printk(KERN_ERR "Attempting AMD northbridge operation on a system with no northbridge\n");
+		return -EINVAL;
+	}
+
+	pci_write_config_dword(dev, 0x1BC + index * 4, val & ~0x40000000);
+	wbinvd();
+	pci_write_config_dword(dev, 0x1BC + index * 4, val);
+
+	return 1;
+}
+
 struct _cache_attr {
 	struct attribute attr;
 	ssize_t (*show)(struct _cpuid4_info *, char *);
@@ -658,6 +774,8 @@ define_one_ro(size);
 define_one_ro(shared_cpu_map);
 define_one_ro(shared_cpu_list);
 
+static struct _cache_attr cache_disable = __ATTR(cache_disable, 0644, show_cache_disable, store_cache_disable);
+
 static struct attribute * default_attrs[] = {
 	&type.attr,
 	&level.attr,
@@ -668,12 +786,10 @@ static struct attribute * default_attrs[] = {
 	&size.attr,
 	&shared_cpu_map.attr,
 	&shared_cpu_list.attr,
+	&cache_disable.attr,
 	NULL
 };
 
-#define to_object(k) container_of(k, struct _index_kobject, kobj)
-#define to_attr(a) container_of(a, struct _cache_attr, attr)
-
 static ssize_t show(struct kobject * kobj, struct attribute * attr, char * buf)
 {
 	struct _cache_attr *fattr = to_attr(attr);
@@ -683,14 +799,22 @@ static ssize_t show(struct kobject * kobj, struct attribute * attr, char * buf)
 	ret = fattr->show ?
 		fattr->show(CPUID4_INFO_IDX(this_leaf->cpu, this_leaf->index),
 			buf) :
-	       	0;
+		0;
 	return ret;
 }
 
 static ssize_t store(struct kobject * kobj, struct attribute * attr,
 		     const char * buf, size_t count)
 {
-	return 0;
+	struct _cache_attr *fattr = to_attr(attr);
+	struct _index_kobject *this_leaf = to_object(kobj);
+	ssize_t ret;
+
+	ret = fattr->store ?
+		fattr->store(CPUID4_INFO_IDX(this_leaf->cpu, this_leaf->index),
+			buf, count) :
+		0;
+	return ret;
 }
 
 static struct sysfs_ops sysfs_ops = {
diff --git a/arch/x86/kernel/cpu/mcheck/mce_64.c b/arch/x86/kernel/cpu/mcheck/mce_64.c
index 65a339678ece..4b031a4ac856 100644
--- a/arch/x86/kernel/cpu/mcheck/mce_64.c
+++ b/arch/x86/kernel/cpu/mcheck/mce_64.c
@@ -759,6 +759,7 @@ static struct sysdev_class mce_sysclass = {
 };
 
 DEFINE_PER_CPU(struct sys_device, device_mce);
+void (*threshold_cpu_callback)(unsigned long action, unsigned int cpu) __cpuinitdata;
 
 /* Why are there no generic functions for this? */
 #define ACCESSOR(name, var, start) \
@@ -859,7 +860,7 @@ error:
 	return err;
 }
 
-static void mce_remove_device(unsigned int cpu)
+static __cpuinit void mce_remove_device(unsigned int cpu)
 {
 	int i;
 
@@ -883,9 +884,13 @@ static int __cpuinit mce_cpu_callback(struct notifier_block *nfb,
 	case CPU_ONLINE:
 	case CPU_ONLINE_FROZEN:
 		mce_create_device(cpu);
+		if (threshold_cpu_callback)
+			threshold_cpu_callback(action, cpu);
 		break;
 	case CPU_DEAD:
 	case CPU_DEAD_FROZEN:
+		if (threshold_cpu_callback)
+			threshold_cpu_callback(action, cpu);
 		mce_remove_device(cpu);
 		break;
 	}
diff --git a/arch/x86/kernel/cpu/mcheck/mce_amd_64.c b/arch/x86/kernel/cpu/mcheck/mce_amd_64.c
index 88736cadbaa6..5eb390a4b2e9 100644
--- a/arch/x86/kernel/cpu/mcheck/mce_amd_64.c
+++ b/arch/x86/kernel/cpu/mcheck/mce_amd_64.c
@@ -628,6 +628,7 @@ static void threshold_remove_bank(unsigned int cpu, int bank)
 	deallocate_threshold_block(cpu, bank);
 
 free_out:
+	kobject_del(b->kobj);
 	kobject_put(b->kobj);
 	kfree(b);
 	per_cpu(threshold_banks, cpu)[bank] = NULL;
@@ -645,14 +646,11 @@ static void threshold_remove_device(unsigned int cpu)
 }
 
 /* get notified when a cpu comes on/off */
-static int __cpuinit threshold_cpu_callback(struct notifier_block *nfb,
-					    unsigned long action, void *hcpu)
+static void __cpuinit amd_64_threshold_cpu_callback(unsigned long action,
+						     unsigned int cpu)
 {
-	/* cpu was unsigned int to begin with */
-	unsigned int cpu = (unsigned long)hcpu;
-
 	if (cpu >= NR_CPUS)
-		goto out;
+		return;
 
 	switch (action) {
 	case CPU_ONLINE:
@@ -666,14 +664,8 @@ static int __cpuinit threshold_cpu_callback(struct notifier_block *nfb,
 	default:
 		break;
 	}
-      out:
-	return NOTIFY_OK;
 }
 
-static struct notifier_block threshold_cpu_notifier __cpuinitdata = {
-	.notifier_call = threshold_cpu_callback,
-};
-
 static __init int threshold_init_device(void)
 {
 	unsigned lcpu = 0;
@@ -684,7 +676,7 @@ static __init int threshold_init_device(void)
 		if (err)
 			return err;
 	}
-	register_hotcpu_notifier(&threshold_cpu_notifier);
+	threshold_cpu_callback = amd_64_threshold_cpu_callback;
 	return 0;
 }
 
diff --git a/arch/x86/kernel/cpu/mkcapflags.pl b/arch/x86/kernel/cpu/mkcapflags.pl
new file mode 100644
index 000000000000..dfea390e1608
--- /dev/null
+++ b/arch/x86/kernel/cpu/mkcapflags.pl
@@ -0,0 +1,32 @@
+#!/usr/bin/perl
+#
+# Generate the x86_cap_flags[] array from include/asm-x86/cpufeature.h
+#
+
+($in, $out) = @ARGV;
+
+open(IN, "< $in\0")   or die "$0: cannot open: $in: $!\n";
+open(OUT, "> $out\0") or die "$0: cannot create: $out: $!\n";
+
+print OUT "#include <asm/cpufeature.h>\n\n";
+print OUT "const char * const x86_cap_flags[NCAPINTS*32] = {\n";
+
+while (defined($line = <IN>)) {
+	if ($line =~ /^\s*\#\s*define\s+(X86_FEATURE_(\S+))\s+(.*)$/) {
+		$macro = $1;
+		$feature = $2;
+		$tail = $3;
+		if ($tail =~ /\/\*\s*\"([^"]*)\".*\*\//) {
+			$feature = $1;
+		}
+
+		if ($feature ne '') {
+			printf OUT "\t%-32s = \"%s\",\n",
+				"[$macro]", "\L$feature";
+		}
+	}
+}
+print OUT "};\n";
+
+close(IN);
+close(OUT);
diff --git a/arch/x86/kernel/cpu/mtrr/generic.c b/arch/x86/kernel/cpu/mtrr/generic.c
index 509bd3d9eacd..cb7d3b6a80eb 100644
--- a/arch/x86/kernel/cpu/mtrr/generic.c
+++ b/arch/x86/kernel/cpu/mtrr/generic.c
@@ -379,6 +379,7 @@ static void generic_get_mtrr(unsigned int reg, unsigned long *base,
 			     unsigned long *size, mtrr_type *type)
 {
 	unsigned int mask_lo, mask_hi, base_lo, base_hi;
+	unsigned int tmp, hi;
 
 	rdmsr(MTRRphysMask_MSR(reg), mask_lo, mask_hi);
 	if ((mask_lo & 0x800) == 0) {
@@ -392,8 +393,23 @@ static void generic_get_mtrr(unsigned int reg, unsigned long *base,
 	rdmsr(MTRRphysBase_MSR(reg), base_lo, base_hi);
 
 	/* Work out the shifted address mask. */
-	mask_lo = size_or_mask | mask_hi << (32 - PAGE_SHIFT)
-	    | mask_lo >> PAGE_SHIFT;
+	tmp = mask_hi << (32 - PAGE_SHIFT) | mask_lo >> PAGE_SHIFT;
+	mask_lo = size_or_mask | tmp;
+	/* Expand tmp with high bits to all 1s*/
+	hi = fls(tmp);
+	if (hi > 0) {
+		tmp |= ~((1<<(hi - 1)) - 1);
+
+		if (tmp != mask_lo) {
+			static int once = 1;
+
+			if (once) {
+				printk(KERN_INFO "mtrr: your BIOS has set up an incorrect mask, fixing it up.\n");
+				once = 0;
+			}
+			mask_lo = tmp;
+		}
+	}
 
 	/* This works correctly if size is a power of two, i.e. a
 	   contiguous range. */
diff --git a/arch/x86/kernel/cpu/mtrr/main.c b/arch/x86/kernel/cpu/mtrr/main.c
index 6f23969c8faf..58ac5d3d4361 100644
--- a/arch/x86/kernel/cpu/mtrr/main.c
+++ b/arch/x86/kernel/cpu/mtrr/main.c
@@ -729,7 +729,7 @@ struct var_mtrr_range_state {
 	mtrr_type type;
 };
 
-struct var_mtrr_range_state __initdata range_state[RANGE_NUM];
+static struct var_mtrr_range_state __initdata range_state[RANGE_NUM];
 static int __initdata debug_print;
 
 static int __init
@@ -1496,11 +1496,8 @@ int __init mtrr_trim_uncached_memory(unsigned long end_pfn)
 
 	/* kvm/qemu doesn't have mtrr set right, don't trim them all */
 	if (!highest_pfn) {
-		if (!kvm_para_available()) {
-			printk(KERN_WARNING
+		WARN(!kvm_para_available(), KERN_WARNING
 				"WARNING: strange, CPU MTRRs all blank?\n");
-			WARN_ON(1);
-		}
 		return 0;
 	}
 
diff --git a/arch/x86/kernel/cpu/perfctr-watchdog.c b/arch/x86/kernel/cpu/perfctr-watchdog.c
index de7439f82b92..05cc22dbd4ff 100644
--- a/arch/x86/kernel/cpu/perfctr-watchdog.c
+++ b/arch/x86/kernel/cpu/perfctr-watchdog.c
@@ -478,7 +478,13 @@ static int setup_p4_watchdog(unsigned nmi_hz)
 		perfctr_msr = MSR_P4_IQ_PERFCTR1;
 		evntsel_msr = MSR_P4_CRU_ESCR0;
 		cccr_msr = MSR_P4_IQ_CCCR1;
-		cccr_val = P4_CCCR_OVF_PMI1 | P4_CCCR_ESCR_SELECT(4);
+
+		/* Pentium 4 D processors don't support P4_CCCR_OVF_PMI1 */
+		if (boot_cpu_data.x86_model == 4 && boot_cpu_data.x86_mask == 4)
+			cccr_val = P4_CCCR_OVF_PMI0;
+		else
+			cccr_val = P4_CCCR_OVF_PMI1;
+		cccr_val |= P4_CCCR_ESCR_SELECT(4);
 	}
 
 	evntsel = P4_ESCR_EVENT_SELECT(0x3F)
diff --git a/arch/x86/kernel/cpu/powerflags.c b/arch/x86/kernel/cpu/powerflags.c
new file mode 100644
index 000000000000..5abbea297e0c
--- /dev/null
+++ b/arch/x86/kernel/cpu/powerflags.c
@@ -0,0 +1,20 @@
+/*
+ * Strings for the various x86 power flags
+ *
+ * This file must not contain any executable code.
+ */
+
+#include <asm/cpufeature.h>
+
+const char *const x86_power_flags[32] = {
+	"ts",	/* temperature sensor */
+	"fid",  /* frequency id control */
+	"vid",  /* voltage id control */
+	"ttp",  /* thermal trip */
+	"tm",
+	"stc",
+	"100mhzsteps",
+	"hwpstate",
+	"",	/* tsc invariant mapped to constant_tsc */
+		/* nothing */
+};
diff --git a/arch/x86/kernel/cpu/transmeta.c b/arch/x86/kernel/cpu/transmeta.c
index b911a2c61b8f..738e03244f95 100644
--- a/arch/x86/kernel/cpu/transmeta.c
+++ b/arch/x86/kernel/cpu/transmeta.c
@@ -12,7 +12,6 @@ static void __cpuinit init_transmeta(struct cpuinfo_x86 *c)
 	unsigned int cpu_rev, cpu_freq = 0, cpu_flags, new_cpu_rev;
 	char cpu_info[65];
 
-	get_model_name(c);	/* Same as AMD/Cyrix */
 	display_cacheinfo(c);
 
 	/* Print CMS and CPU revision */
@@ -102,6 +101,7 @@ static struct cpu_dev transmeta_cpu_dev __cpuinitdata = {
 	.c_ident	= { "GenuineTMx86", "TransmetaCPU" },
 	.c_init		= init_transmeta,
 	.c_identify	= transmeta_identify,
+	.c_x86_vendor	= X86_VENDOR_TRANSMETA,
 };
 
-cpu_vendor_dev_register(X86_VENDOR_TRANSMETA, &transmeta_cpu_dev);
+cpu_dev_register(transmeta_cpu_dev);
diff --git a/arch/x86/kernel/cpu/umc.c b/arch/x86/kernel/cpu/umc.c
index b1fc90989d75..e777f79e0960 100644
--- a/arch/x86/kernel/cpu/umc.c
+++ b/arch/x86/kernel/cpu/umc.c
@@ -19,7 +19,8 @@ static struct cpu_dev umc_cpu_dev __cpuinitdata = {
 		  }
 		},
 	},
+	.c_x86_vendor	= X86_VENDOR_UMC,
 };
 
-cpu_vendor_dev_register(X86_VENDOR_UMC, &umc_cpu_dev);
+cpu_dev_register(umc_cpu_dev);
 
diff --git a/arch/x86/kernel/cpuid.c b/arch/x86/kernel/cpuid.c
index 14b11b3be31c..8e9cd6a8ec12 100644
--- a/arch/x86/kernel/cpuid.c
+++ b/arch/x86/kernel/cpuid.c
@@ -89,6 +89,8 @@ static ssize_t cpuid_read(struct file *file, char __user *buf,
 	struct cpuid_regs cmd;
 	int cpu = iminor(file->f_path.dentry->d_inode);
 	u64 pos = *ppos;
+	ssize_t bytes = 0;
+	int err = 0;
 
 	if (count % 16)
 		return -EINVAL;	/* Invalid chunk size */
@@ -96,14 +98,19 @@ static ssize_t cpuid_read(struct file *file, char __user *buf,
 	for (; count; count -= 16) {
 		cmd.eax = pos;
 		cmd.ecx = pos >> 32;
-		smp_call_function_single(cpu, cpuid_smp_cpuid, &cmd, 1);
-		if (copy_to_user(tmp, &cmd, 16))
-			return -EFAULT;
+		err = smp_call_function_single(cpu, cpuid_smp_cpuid, &cmd, 1);
+		if (err)
+			break;
+		if (copy_to_user(tmp, &cmd, 16)) {
+			err = -EFAULT;
+			break;
+		}
 		tmp += 16;
+		bytes += 16;
 		*ppos = ++pos;
 	}
 
-	return tmp - buf;
+	return bytes ? bytes : err;
 }
 
 static int cpuid_open(struct inode *inode, struct file *file)
diff --git a/arch/x86/kernel/e820.c b/arch/x86/kernel/e820.c
index 9af89078f7bb..e24d1bc47b46 100644
--- a/arch/x86/kernel/e820.c
+++ b/arch/x86/kernel/e820.c
@@ -148,6 +148,9 @@ void __init e820_print_map(char *who)
 		case E820_NVS:
 			printk(KERN_CONT "(ACPI NVS)\n");
 			break;
+		case E820_UNUSABLE:
+			printk("(unusable)\n");
+			break;
 		default:
 			printk(KERN_CONT "type %u\n", e820.map[i].type);
 			break;
@@ -1260,6 +1263,7 @@ static inline const char *e820_type_to_string(int e820_type)
 	case E820_RAM:	return "System RAM";
 	case E820_ACPI:	return "ACPI Tables";
 	case E820_NVS:	return "ACPI Non-volatile Storage";
+	case E820_UNUSABLE:	return "Unusable memory";
 	default:	return "reserved";
 	}
 }
@@ -1267,6 +1271,7 @@ static inline const char *e820_type_to_string(int e820_type)
 /*
  * Mark e820 reserved areas as busy for the resource manager.
  */
+static struct resource __initdata *e820_res;
 void __init e820_reserve_resources(void)
 {
 	int i;
@@ -1274,6 +1279,7 @@ void __init e820_reserve_resources(void)
 	u64 end;
 
 	res = alloc_bootmem_low(sizeof(struct resource) * e820.nr_map);
+	e820_res = res;
 	for (i = 0; i < e820.nr_map; i++) {
 		end = e820.map[i].addr + e820.map[i].size - 1;
 #ifndef CONFIG_RESOURCES_64BIT
@@ -1287,7 +1293,14 @@ void __init e820_reserve_resources(void)
 		res->end = end;
 
 		res->flags = IORESOURCE_MEM | IORESOURCE_BUSY;
-		insert_resource(&iomem_resource, res);
+
+		/*
+		 * don't register the region that could be conflicted with
+		 * pci device BAR resource and insert them later in
+		 * pcibios_resource_survey()
+		 */
+		if (e820.map[i].type != E820_RESERVED || res->start < (1ULL<<20))
+			insert_resource(&iomem_resource, res);
 		res++;
 	}
 
@@ -1299,6 +1312,19 @@ void __init e820_reserve_resources(void)
 	}
 }
 
+void __init e820_reserve_resources_late(void)
+{
+	int i;
+	struct resource *res;
+
+	res = e820_res;
+	for (i = 0; i < e820.nr_map; i++) {
+		if (!res->parent && res->end)
+			reserve_region_with_split(&iomem_resource, res->start, res->end, res->name);
+		res++;
+	}
+}
+
 char *__init default_machine_specific_memory_setup(void)
 {
 	char *who = "BIOS-e820";
diff --git a/arch/x86/kernel/efi_32.c b/arch/x86/kernel/efi_32.c
index 4b63c8e1f13b..5cab48ee61a4 100644
--- a/arch/x86/kernel/efi_32.c
+++ b/arch/x86/kernel/efi_32.c
@@ -53,7 +53,7 @@ void efi_call_phys_prelog(void)
 	 * directory. If I have PAE, I just need to duplicate one entry in
 	 * page directory.
 	 */
-	cr4 = read_cr4();
+	cr4 = read_cr4_safe();
 
 	if (cr4 & X86_CR4_PAE) {
 		efi_bak_pg_dir_pointer[0].pgd =
@@ -91,7 +91,7 @@ void efi_call_phys_epilog(void)
 	gdt_descr.size = GDT_SIZE - 1;
 	load_gdt(&gdt_descr);
 
-	cr4 = read_cr4();
+	cr4 = read_cr4_safe();
 
 	if (cr4 & X86_CR4_PAE) {
 		swapper_pg_dir[pgd_index(0)].pgd =
diff --git a/arch/x86/kernel/entry_64.S b/arch/x86/kernel/entry_64.S
index 89434d439605..cf3a0b2d0059 100644
--- a/arch/x86/kernel/entry_64.S
+++ b/arch/x86/kernel/entry_64.S
@@ -275,9 +275,9 @@ ENTRY(native_usergs_sysret64)
 ENTRY(ret_from_fork)
 	CFI_DEFAULT_STACK
 	push kernel_eflags(%rip)
-	CFI_ADJUST_CFA_OFFSET 4
+	CFI_ADJUST_CFA_OFFSET 8
 	popf				# reset kernel eflags
-	CFI_ADJUST_CFA_OFFSET -4
+	CFI_ADJUST_CFA_OFFSET -8
 	call schedule_tail
 	GET_THREAD_INFO(%rcx)
 	testl $(_TIF_SYSCALL_TRACE|_TIF_SYSCALL_AUDIT),TI_flags(%rcx)
diff --git a/arch/x86/kernel/es7000_32.c b/arch/x86/kernel/es7000_32.c
new file mode 100644
index 000000000000..849e5cd485b8
--- /dev/null
+++ b/arch/x86/kernel/es7000_32.c
@@ -0,0 +1,345 @@
+/*
+ * Written by: Garry Forsgren, Unisys Corporation
+ *             Natalie Protasevich, Unisys Corporation
+ * This file contains the code to configure and interface
+ * with Unisys ES7000 series hardware system manager.
+ *
+ * Copyright (c) 2003 Unisys Corporation.  All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it would be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write the Free Software Foundation, Inc., 59
+ * Temple Place - Suite 330, Boston MA 02111-1307, USA.
+ *
+ * Contact information: Unisys Corporation, Township Line & Union Meeting
+ * Roads-A, Unisys Way, Blue Bell, Pennsylvania, 19424, or:
+ *
+ * http://www.unisys.com
+ */
+
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/smp.h>
+#include <linux/string.h>
+#include <linux/spinlock.h>
+#include <linux/errno.h>
+#include <linux/notifier.h>
+#include <linux/reboot.h>
+#include <linux/init.h>
+#include <linux/acpi.h>
+#include <asm/io.h>
+#include <asm/nmi.h>
+#include <asm/smp.h>
+#include <asm/apicdef.h>
+#include <mach_mpparse.h>
+
+/*
+ * ES7000 chipsets
+ */
+
+#define NON_UNISYS		0
+#define ES7000_CLASSIC		1
+#define ES7000_ZORRO		2
+
+
+#define	MIP_REG			1
+#define	MIP_PSAI_REG		4
+
+#define	MIP_BUSY		1
+#define	MIP_SPIN		0xf0000
+#define	MIP_VALID		0x0100000000000000ULL
+#define	MIP_PORT(VALUE)	((VALUE >> 32) & 0xffff)
+
+#define	MIP_RD_LO(VALUE)	(VALUE & 0xffffffff)
+
+struct mip_reg_info {
+	unsigned long long mip_info;
+	unsigned long long delivery_info;
+	unsigned long long host_reg;
+	unsigned long long mip_reg;
+};
+
+struct part_info {
+	unsigned char type;
+	unsigned char length;
+	unsigned char part_id;
+	unsigned char apic_mode;
+	unsigned long snum;
+	char ptype[16];
+	char sname[64];
+	char pname[64];
+};
+
+struct psai {
+	unsigned long long entry_type;
+	unsigned long long addr;
+	unsigned long long bep_addr;
+};
+
+struct es7000_mem_info {
+	unsigned char type;
+	unsigned char length;
+	unsigned char resv[6];
+	unsigned long long  start;
+	unsigned long long  size;
+};
+
+struct es7000_oem_table {
+	unsigned long long hdr;
+	struct mip_reg_info mip;
+	struct part_info pif;
+	struct es7000_mem_info shm;
+	struct psai psai;
+};
+
+#ifdef CONFIG_ACPI
+
+struct oem_table {
+	struct acpi_table_header Header;
+	u32 OEMTableAddr;
+	u32 OEMTableSize;
+};
+
+extern int find_unisys_acpi_oem_table(unsigned long *oem_addr);
+#endif
+
+struct mip_reg {
+	unsigned long long off_0;
+	unsigned long long off_8;
+	unsigned long long off_10;
+	unsigned long long off_18;
+	unsigned long long off_20;
+	unsigned long long off_28;
+	unsigned long long off_30;
+	unsigned long long off_38;
+};
+
+#define	MIP_SW_APIC		0x1020b
+#define	MIP_FUNC(VALUE)		(VALUE & 0xff)
+
+/*
+ * ES7000 Globals
+ */
+
+static volatile unsigned long	*psai = NULL;
+static struct mip_reg		*mip_reg;
+static struct mip_reg		*host_reg;
+static int 			mip_port;
+static unsigned long		mip_addr, host_addr;
+
+int es7000_plat;
+
+/*
+ * GSI override for ES7000 platforms.
+ */
+
+static unsigned int base;
+
+static int
+es7000_rename_gsi(int ioapic, int gsi)
+{
+	if (es7000_plat == ES7000_ZORRO)
+		return gsi;
+
+	if (!base) {
+		int i;
+		for (i = 0; i < nr_ioapics; i++)
+			base += nr_ioapic_registers[i];
+	}
+
+	if (!ioapic && (gsi < 16))
+		gsi += base;
+	return gsi;
+}
+
+void __init
+setup_unisys(void)
+{
+	/*
+	 * Determine the generation of the ES7000 currently running.
+	 *
+	 * es7000_plat = 1 if the machine is a 5xx ES7000 box
+	 * es7000_plat = 2 if the machine is a x86_64 ES7000 box
+	 *
+	 */
+	if (!(boot_cpu_data.x86 <= 15 && boot_cpu_data.x86_model <= 2))
+		es7000_plat = ES7000_ZORRO;
+	else
+		es7000_plat = ES7000_CLASSIC;
+	ioapic_renumber_irq = es7000_rename_gsi;
+}
+
+/*
+ * Parse the OEM Table
+ */
+
+int __init
+parse_unisys_oem (char *oemptr)
+{
+	int                     i;
+	int 			success = 0;
+	unsigned char           type, size;
+	unsigned long           val;
+	char                    *tp = NULL;
+	struct psai             *psaip = NULL;
+	struct mip_reg_info 	*mi;
+	struct mip_reg		*host, *mip;
+
+	tp = oemptr;
+
+	tp += 8;
+
+	for (i=0; i <= 6; i++) {
+		type = *tp++;
+		size = *tp++;
+		tp -= 2;
+		switch (type) {
+		case MIP_REG:
+			mi = (struct mip_reg_info *)tp;
+			val = MIP_RD_LO(mi->host_reg);
+			host_addr = val;
+			host = (struct mip_reg *)val;
+			host_reg = __va(host);
+			val = MIP_RD_LO(mi->mip_reg);
+			mip_port = MIP_PORT(mi->mip_info);
+			mip_addr = val;
+			mip = (struct mip_reg *)val;
+			mip_reg = __va(mip);
+			pr_debug("es7000_mipcfg: host_reg = 0x%lx \n",
+				 (unsigned long)host_reg);
+			pr_debug("es7000_mipcfg: mip_reg = 0x%lx \n",
+				 (unsigned long)mip_reg);
+			success++;
+			break;
+		case MIP_PSAI_REG:
+			psaip = (struct psai *)tp;
+			if (tp != NULL) {
+				if (psaip->addr)
+					psai = __va(psaip->addr);
+				else
+					psai = NULL;
+				success++;
+			}
+			break;
+		default:
+			break;
+		}
+		tp += size;
+	}
+
+	if (success < 2) {
+		es7000_plat = NON_UNISYS;
+	} else
+		setup_unisys();
+	return es7000_plat;
+}
+
+#ifdef CONFIG_ACPI
+int __init
+find_unisys_acpi_oem_table(unsigned long *oem_addr)
+{
+	struct acpi_table_header *header = NULL;
+	int i = 0;
+	while (ACPI_SUCCESS(acpi_get_table("OEM1", i++, &header))) {
+		if (!memcmp((char *) &header->oem_id, "UNISYS", 6)) {
+			struct oem_table *t = (struct oem_table *)header;
+			*oem_addr = (unsigned long)__acpi_map_table(t->OEMTableAddr,
+								    t->OEMTableSize);
+			return 0;
+		}
+	}
+	return -1;
+}
+#endif
+
+static void
+es7000_spin(int n)
+{
+	int i = 0;
+
+	while (i++ < n)
+		rep_nop();
+}
+
+static int __init
+es7000_mip_write(struct mip_reg *mip_reg)
+{
+	int			status = 0;
+	int			spin;
+
+	spin = MIP_SPIN;
+	while (((unsigned long long)host_reg->off_38 &
+		(unsigned long long)MIP_VALID) != 0) {
+			if (--spin <= 0) {
+				printk("es7000_mip_write: Timeout waiting for Host Valid Flag");
+				return -1;
+			}
+		es7000_spin(MIP_SPIN);
+	}
+
+	memcpy(host_reg, mip_reg, sizeof(struct mip_reg));
+	outb(1, mip_port);
+
+	spin = MIP_SPIN;
+
+	while (((unsigned long long)mip_reg->off_38 &
+		(unsigned long long)MIP_VALID) == 0) {
+		if (--spin <= 0) {
+			printk("es7000_mip_write: Timeout waiting for MIP Valid Flag");
+			return -1;
+		}
+		es7000_spin(MIP_SPIN);
+	}
+
+	status = ((unsigned long long)mip_reg->off_0 &
+		(unsigned long long)0xffff0000000000ULL) >> 48;
+	mip_reg->off_38 = ((unsigned long long)mip_reg->off_38 &
+		(unsigned long long)~MIP_VALID);
+	return status;
+}
+
+int
+es7000_start_cpu(int cpu, unsigned long eip)
+{
+	unsigned long vect = 0, psaival = 0;
+
+	if (psai == NULL)
+		return -1;
+
+	vect = ((unsigned long)__pa(eip)/0x1000) << 16;
+	psaival = (0x1000000 | vect | cpu);
+
+	while (*psai & 0x1000000)
+                ;
+
+	*psai = psaival;
+
+	return 0;
+
+}
+
+void __init
+es7000_sw_apic(void)
+{
+	if (es7000_plat) {
+		int mip_status;
+		struct mip_reg es7000_mip_reg;
+
+		printk("ES7000: Enabling APIC mode.\n");
+        	memset(&es7000_mip_reg, 0, sizeof(struct mip_reg));
+        	es7000_mip_reg.off_0 = MIP_SW_APIC;
+        	es7000_mip_reg.off_38 = (MIP_VALID);
+        	while ((mip_status = es7000_mip_write(&es7000_mip_reg)) != 0)
+              		printk("es7000_sw_apic: command failed, status = %x\n",
+				mip_status);
+		return;
+	}
+}
diff --git a/arch/x86/kernel/genapic_64.c b/arch/x86/kernel/genapic_64.c
index 1fa8be5bd217..6c9bfc9e1e95 100644
--- a/arch/x86/kernel/genapic_64.c
+++ b/arch/x86/kernel/genapic_64.c
@@ -16,86 +16,63 @@
 #include <linux/ctype.h>
 #include <linux/init.h>
 #include <linux/hardirq.h>
+#include <linux/dmar.h>
 
 #include <asm/smp.h>
 #include <asm/ipi.h>
 #include <asm/genapic.h>
 
-#ifdef CONFIG_ACPI
-#include <acpi/acpi_bus.h>
-#endif
-
-DEFINE_PER_CPU(int, x2apic_extra_bits);
+extern struct genapic apic_flat;
+extern struct genapic apic_physflat;
+extern struct genapic apic_x2xpic_uv_x;
+extern struct genapic apic_x2apic_phys;
+extern struct genapic apic_x2apic_cluster;
 
 struct genapic __read_mostly *genapic = &apic_flat;
 
-static enum uv_system_type uv_system_type;
+static struct genapic *apic_probe[] __initdata = {
+	&apic_x2apic_uv_x,
+	&apic_x2apic_phys,
+	&apic_x2apic_cluster,
+	&apic_physflat,
+	NULL,
+};
 
 /*
  * Check the APIC IDs in bios_cpu_apicid and choose the APIC mode.
  */
 void __init setup_apic_routing(void)
 {
-	if (uv_system_type == UV_NON_UNIQUE_APIC)
-		genapic = &apic_x2apic_uv_x;
-	else
-#ifdef CONFIG_ACPI
-	/*
-	 * Quirk: some x86_64 machines can only use physical APIC mode
-	 * regardless of how many processors are present (x86_64 ES7000
-	 * is an example).
-	 */
-	if (acpi_gbl_FADT.header.revision > FADT2_REVISION_ID &&
-			(acpi_gbl_FADT.flags & ACPI_FADT_APIC_PHYSICAL))
-		genapic = &apic_physflat;
-	else
-#endif
-
-	if (max_physical_apicid < 8)
-		genapic = &apic_flat;
-	else
-		genapic = &apic_physflat;
+	if (genapic == &apic_x2apic_phys || genapic == &apic_x2apic_cluster) {
+		if (!intr_remapping_enabled)
+			genapic = &apic_flat;
+	}
 
-	printk(KERN_INFO "Setting APIC routing to %s\n", genapic->name);
+	if (genapic == &apic_flat) {
+		if (max_physical_apicid >= 8)
+			genapic = &apic_physflat;
+		printk(KERN_INFO "Setting APIC routing to %s\n", genapic->name);
+	}
 }
 
 /* Same for both flat and physical. */
 
-void send_IPI_self(int vector)
+void apic_send_IPI_self(int vector)
 {
 	__send_IPI_shortcut(APIC_DEST_SELF, vector, APIC_DEST_PHYSICAL);
 }
 
 int __init acpi_madt_oem_check(char *oem_id, char *oem_table_id)
 {
-	if (!strcmp(oem_id, "SGI")) {
-		if (!strcmp(oem_table_id, "UVL"))
-			uv_system_type = UV_LEGACY_APIC;
-		else if (!strcmp(oem_table_id, "UVX"))
-			uv_system_type = UV_X2APIC;
-		else if (!strcmp(oem_table_id, "UVH"))
-			uv_system_type = UV_NON_UNIQUE_APIC;
+	int i;
+
+	for (i = 0; apic_probe[i]; ++i) {
+		if (apic_probe[i]->acpi_madt_oem_check(oem_id, oem_table_id)) {
+			genapic = apic_probe[i];
+			printk(KERN_INFO "Setting APIC routing to %s.\n",
+				genapic->name);
+			return 1;
+		}
 	}
 	return 0;
 }
-
-unsigned int read_apic_id(void)
-{
-	unsigned int id;
-
-	WARN_ON(preemptible() && num_online_cpus() > 1);
-	id = apic_read(APIC_ID);
-	if (uv_system_type >= UV_X2APIC)
-		id  |= __get_cpu_var(x2apic_extra_bits);
-	return id;
-}
-
-enum uv_system_type get_uv_system_type(void)
-{
-	return uv_system_type;
-}
-
-int is_uv_system(void)
-{
-	return uv_system_type != UV_NONE;
-}
diff --git a/arch/x86/kernel/genapic_flat_64.c b/arch/x86/kernel/genapic_flat_64.c
index 786548a62d38..9eca5ba7a6b1 100644
--- a/arch/x86/kernel/genapic_flat_64.c
+++ b/arch/x86/kernel/genapic_flat_64.c
@@ -15,9 +15,20 @@
 #include <linux/kernel.h>
 #include <linux/ctype.h>
 #include <linux/init.h>
+#include <linux/hardirq.h>
 #include <asm/smp.h>
 #include <asm/ipi.h>
 #include <asm/genapic.h>
+#include <mach_apicdef.h>
+
+#ifdef CONFIG_ACPI
+#include <acpi/acpi_bus.h>
+#endif
+
+static int __init flat_acpi_madt_oem_check(char *oem_id, char *oem_table_id)
+{
+	return 1;
+}
 
 static cpumask_t flat_target_cpus(void)
 {
@@ -95,9 +106,33 @@ static void flat_send_IPI_all(int vector)
 		__send_IPI_shortcut(APIC_DEST_ALLINC, vector, APIC_DEST_LOGICAL);
 }
 
+static unsigned int get_apic_id(unsigned long x)
+{
+	unsigned int id;
+
+	id = (((x)>>24) & 0xFFu);
+	return id;
+}
+
+static unsigned long set_apic_id(unsigned int id)
+{
+	unsigned long x;
+
+	x = ((id & 0xFFu)<<24);
+	return x;
+}
+
+static unsigned int read_xapic_id(void)
+{
+	unsigned int id;
+
+	id = get_apic_id(apic_read(APIC_ID));
+	return id;
+}
+
 static int flat_apic_id_registered(void)
 {
-	return physid_isset(GET_APIC_ID(read_apic_id()), phys_cpu_present_map);
+	return physid_isset(read_xapic_id(), phys_cpu_present_map);
 }
 
 static unsigned int flat_cpu_mask_to_apicid(cpumask_t cpumask)
@@ -112,6 +147,7 @@ static unsigned int phys_pkg_id(int index_msb)
 
 struct genapic apic_flat =  {
 	.name = "flat",
+	.acpi_madt_oem_check = flat_acpi_madt_oem_check,
 	.int_delivery_mode = dest_LowestPrio,
 	.int_dest_mode = (APIC_DEST_LOGICAL != 0),
 	.target_cpus = flat_target_cpus,
@@ -121,8 +157,12 @@ struct genapic apic_flat =  {
 	.send_IPI_all = flat_send_IPI_all,
 	.send_IPI_allbutself = flat_send_IPI_allbutself,
 	.send_IPI_mask = flat_send_IPI_mask,
+	.send_IPI_self = apic_send_IPI_self,
 	.cpu_mask_to_apicid = flat_cpu_mask_to_apicid,
 	.phys_pkg_id = phys_pkg_id,
+	.get_apic_id = get_apic_id,
+	.set_apic_id = set_apic_id,
+	.apic_id_mask = (0xFFu<<24),
 };
 
 /*
@@ -130,6 +170,21 @@ struct genapic apic_flat =  {
  * We cannot use logical delivery in this case because the mask
  * overflows, so use physical mode.
  */
+static int __init physflat_acpi_madt_oem_check(char *oem_id, char *oem_table_id)
+{
+#ifdef CONFIG_ACPI
+	/*
+	 * Quirk: some x86_64 machines can only use physical APIC mode
+	 * regardless of how many processors are present (x86_64 ES7000
+	 * is an example).
+	 */
+	if (acpi_gbl_FADT.header.revision > FADT2_REVISION_ID &&
+		(acpi_gbl_FADT.flags & ACPI_FADT_APIC_PHYSICAL))
+		return 1;
+#endif
+
+	return 0;
+}
 
 static cpumask_t physflat_target_cpus(void)
 {
@@ -176,6 +231,7 @@ static unsigned int physflat_cpu_mask_to_apicid(cpumask_t cpumask)
 
 struct genapic apic_physflat =  {
 	.name = "physical flat",
+	.acpi_madt_oem_check = physflat_acpi_madt_oem_check,
 	.int_delivery_mode = dest_Fixed,
 	.int_dest_mode = (APIC_DEST_PHYSICAL != 0),
 	.target_cpus = physflat_target_cpus,
@@ -185,6 +241,10 @@ struct genapic apic_physflat =  {
 	.send_IPI_all = physflat_send_IPI_all,
 	.send_IPI_allbutself = physflat_send_IPI_allbutself,
 	.send_IPI_mask = physflat_send_IPI_mask,
+	.send_IPI_self = apic_send_IPI_self,
 	.cpu_mask_to_apicid = physflat_cpu_mask_to_apicid,
 	.phys_pkg_id = phys_pkg_id,
+	.get_apic_id = get_apic_id,
+	.set_apic_id = set_apic_id,
+	.apic_id_mask = (0xFFu<<24),
 };
diff --git a/arch/x86/kernel/genx2apic_cluster.c b/arch/x86/kernel/genx2apic_cluster.c
new file mode 100644
index 000000000000..e4bf2cc0d743
--- /dev/null
+++ b/arch/x86/kernel/genx2apic_cluster.c
@@ -0,0 +1,159 @@
+#include <linux/threads.h>
+#include <linux/cpumask.h>
+#include <linux/string.h>
+#include <linux/kernel.h>
+#include <linux/ctype.h>
+#include <linux/init.h>
+#include <linux/dmar.h>
+
+#include <asm/smp.h>
+#include <asm/ipi.h>
+#include <asm/genapic.h>
+
+DEFINE_PER_CPU(u32, x86_cpu_to_logical_apicid);
+
+static int __init x2apic_acpi_madt_oem_check(char *oem_id, char *oem_table_id)
+{
+	if (cpu_has_x2apic)
+		return 1;
+
+	return 0;
+}
+
+/* Start with all IRQs pointing to boot CPU.  IRQ balancing will shift them. */
+
+static cpumask_t x2apic_target_cpus(void)
+{
+	return cpumask_of_cpu(0);
+}
+
+/*
+ * for now each logical cpu is in its own vector allocation domain.
+ */
+static cpumask_t x2apic_vector_allocation_domain(int cpu)
+{
+	cpumask_t domain = CPU_MASK_NONE;
+	cpu_set(cpu, domain);
+	return domain;
+}
+
+static void __x2apic_send_IPI_dest(unsigned int apicid, int vector,
+				   unsigned int dest)
+{
+	unsigned long cfg;
+
+	cfg = __prepare_ICR(0, vector, dest);
+
+	/*
+	 * send the IPI.
+	 */
+	x2apic_icr_write(cfg, apicid);
+}
+
+/*
+ * for now, we send the IPI's one by one in the cpumask.
+ * TBD: Based on the cpu mask, we can send the IPI's to the cluster group
+ * at once. We have 16 cpu's in a cluster. This will minimize IPI register
+ * writes.
+ */
+static void x2apic_send_IPI_mask(cpumask_t mask, int vector)
+{
+	unsigned long flags;
+	unsigned long query_cpu;
+
+	local_irq_save(flags);
+	for_each_cpu_mask(query_cpu, mask) {
+		__x2apic_send_IPI_dest(per_cpu(x86_cpu_to_logical_apicid, query_cpu),
+				       vector, APIC_DEST_LOGICAL);
+	}
+	local_irq_restore(flags);
+}
+
+static void x2apic_send_IPI_allbutself(int vector)
+{
+	cpumask_t mask = cpu_online_map;
+
+	cpu_clear(smp_processor_id(), mask);
+
+	if (!cpus_empty(mask))
+		x2apic_send_IPI_mask(mask, vector);
+}
+
+static void x2apic_send_IPI_all(int vector)
+{
+	x2apic_send_IPI_mask(cpu_online_map, vector);
+}
+
+static int x2apic_apic_id_registered(void)
+{
+	return 1;
+}
+
+static unsigned int x2apic_cpu_mask_to_apicid(cpumask_t cpumask)
+{
+	int cpu;
+
+	/*
+	 * We're using fixed IRQ delivery, can only return one phys APIC ID.
+	 * May as well be the first.
+	 */
+	cpu = first_cpu(cpumask);
+	if ((unsigned)cpu < NR_CPUS)
+		return per_cpu(x86_cpu_to_logical_apicid, cpu);
+	else
+		return BAD_APICID;
+}
+
+static unsigned int get_apic_id(unsigned long x)
+{
+	unsigned int id;
+
+	id = x;
+	return id;
+}
+
+static unsigned long set_apic_id(unsigned int id)
+{
+	unsigned long x;
+
+	x = id;
+	return x;
+}
+
+static unsigned int phys_pkg_id(int index_msb)
+{
+	return current_cpu_data.initial_apicid >> index_msb;
+}
+
+static void x2apic_send_IPI_self(int vector)
+{
+	apic_write(APIC_SELF_IPI, vector);
+}
+
+static void init_x2apic_ldr(void)
+{
+	int cpu = smp_processor_id();
+
+	per_cpu(x86_cpu_to_logical_apicid, cpu) = apic_read(APIC_LDR);
+	return;
+}
+
+struct genapic apic_x2apic_cluster = {
+	.name = "cluster x2apic",
+	.acpi_madt_oem_check = x2apic_acpi_madt_oem_check,
+	.int_delivery_mode = dest_LowestPrio,
+	.int_dest_mode = (APIC_DEST_LOGICAL != 0),
+	.target_cpus = x2apic_target_cpus,
+	.vector_allocation_domain = x2apic_vector_allocation_domain,
+	.apic_id_registered = x2apic_apic_id_registered,
+	.init_apic_ldr = init_x2apic_ldr,
+	.send_IPI_all = x2apic_send_IPI_all,
+	.send_IPI_allbutself = x2apic_send_IPI_allbutself,
+	.send_IPI_mask = x2apic_send_IPI_mask,
+	.send_IPI_self = x2apic_send_IPI_self,
+	.cpu_mask_to_apicid = x2apic_cpu_mask_to_apicid,
+	.phys_pkg_id = phys_pkg_id,
+	.get_apic_id = get_apic_id,
+	.set_apic_id = set_apic_id,
+	.apic_id_mask = (0xFFFFFFFFu),
+};
diff --git a/arch/x86/kernel/genx2apic_phys.c b/arch/x86/kernel/genx2apic_phys.c
new file mode 100644
index 000000000000..8f1343df2627
--- /dev/null
+++ b/arch/x86/kernel/genx2apic_phys.c
@@ -0,0 +1,154 @@
+#include <linux/threads.h>
+#include <linux/cpumask.h>
+#include <linux/string.h>
+#include <linux/kernel.h>
+#include <linux/ctype.h>
+#include <linux/init.h>
+#include <linux/dmar.h>
+
+#include <asm/smp.h>
+#include <asm/ipi.h>
+#include <asm/genapic.h>
+
+static int x2apic_phys;
+
+static int set_x2apic_phys_mode(char *arg)
+{
+	x2apic_phys = 1;
+	return 0;
+}
+early_param("x2apic_phys", set_x2apic_phys_mode);
+
+static int __init x2apic_acpi_madt_oem_check(char *oem_id, char *oem_table_id)
+{
+	if (cpu_has_x2apic && x2apic_phys)
+		return 1;
+
+	return 0;
+}
+
+/* Start with all IRQs pointing to boot CPU.  IRQ balancing will shift them. */
+
+static cpumask_t x2apic_target_cpus(void)
+{
+	return cpumask_of_cpu(0);
+}
+
+static cpumask_t x2apic_vector_allocation_domain(int cpu)
+{
+	cpumask_t domain = CPU_MASK_NONE;
+	cpu_set(cpu, domain);
+	return domain;
+}
+
+static void __x2apic_send_IPI_dest(unsigned int apicid, int vector,
+				   unsigned int dest)
+{
+	unsigned long cfg;
+
+	cfg = __prepare_ICR(0, vector, dest);
+
+	/*
+	 * send the IPI.
+	 */
+	x2apic_icr_write(cfg, apicid);
+}
+
+static void x2apic_send_IPI_mask(cpumask_t mask, int vector)
+{
+	unsigned long flags;
+	unsigned long query_cpu;
+
+	local_irq_save(flags);
+	for_each_cpu_mask(query_cpu, mask) {
+		__x2apic_send_IPI_dest(per_cpu(x86_cpu_to_apicid, query_cpu),
+				       vector, APIC_DEST_PHYSICAL);
+	}
+	local_irq_restore(flags);
+}
+
+static void x2apic_send_IPI_allbutself(int vector)
+{
+	cpumask_t mask = cpu_online_map;
+
+	cpu_clear(smp_processor_id(), mask);
+
+	if (!cpus_empty(mask))
+		x2apic_send_IPI_mask(mask, vector);
+}
+
+static void x2apic_send_IPI_all(int vector)
+{
+	x2apic_send_IPI_mask(cpu_online_map, vector);
+}
+
+static int x2apic_apic_id_registered(void)
+{
+	return 1;
+}
+
+static unsigned int x2apic_cpu_mask_to_apicid(cpumask_t cpumask)
+{
+	int cpu;
+
+	/*
+	 * We're using fixed IRQ delivery, can only return one phys APIC ID.
+	 * May as well be the first.
+	 */
+	cpu = first_cpu(cpumask);
+	if ((unsigned)cpu < NR_CPUS)
+		return per_cpu(x86_cpu_to_apicid, cpu);
+	else
+		return BAD_APICID;
+}
+
+static unsigned int get_apic_id(unsigned long x)
+{
+	unsigned int id;
+
+	id = x;
+	return id;
+}
+
+static unsigned long set_apic_id(unsigned int id)
+{
+	unsigned long x;
+
+	x = id;
+	return x;
+}
+
+static unsigned int phys_pkg_id(int index_msb)
+{
+	return current_cpu_data.initial_apicid >> index_msb;
+}
+
+void x2apic_send_IPI_self(int vector)
+{
+	apic_write(APIC_SELF_IPI, vector);
+}
+
+void init_x2apic_ldr(void)
+{
+	return;
+}
+
+struct genapic apic_x2apic_phys = {
+	.name = "physical x2apic",
+	.acpi_madt_oem_check = x2apic_acpi_madt_oem_check,
+	.int_delivery_mode = dest_Fixed,
+	.int_dest_mode = (APIC_DEST_PHYSICAL != 0),
+	.target_cpus = x2apic_target_cpus,
+	.vector_allocation_domain = x2apic_vector_allocation_domain,
+	.apic_id_registered = x2apic_apic_id_registered,
+	.init_apic_ldr = init_x2apic_ldr,
+	.send_IPI_all = x2apic_send_IPI_all,
+	.send_IPI_allbutself = x2apic_send_IPI_allbutself,
+	.send_IPI_mask = x2apic_send_IPI_mask,
+	.send_IPI_self = x2apic_send_IPI_self,
+	.cpu_mask_to_apicid = x2apic_cpu_mask_to_apicid,
+	.phys_pkg_id = phys_pkg_id,
+	.get_apic_id = get_apic_id,
+	.set_apic_id = set_apic_id,
+	.apic_id_mask = (0xFFFFFFFFu),
+};
diff --git a/arch/x86/kernel/genx2apic_uv_x.c b/arch/x86/kernel/genx2apic_uv_x.c
index 2cfcbded888a..ae2ffc8a400c 100644
--- a/arch/x86/kernel/genx2apic_uv_x.c
+++ b/arch/x86/kernel/genx2apic_uv_x.c
@@ -12,12 +12,12 @@
 #include <linux/threads.h>
 #include <linux/cpumask.h>
 #include <linux/string.h>
-#include <linux/kernel.h>
 #include <linux/ctype.h>
 #include <linux/init.h>
 #include <linux/sched.h>
 #include <linux/bootmem.h>
 #include <linux/module.h>
+#include <linux/hardirq.h>
 #include <asm/smp.h>
 #include <asm/ipi.h>
 #include <asm/genapic.h>
@@ -26,6 +26,36 @@
 #include <asm/uv/uv_hub.h>
 #include <asm/uv/bios.h>
 
+DEFINE_PER_CPU(int, x2apic_extra_bits);
+
+static enum uv_system_type uv_system_type;
+
+static int __init uv_acpi_madt_oem_check(char *oem_id, char *oem_table_id)
+{
+	if (!strcmp(oem_id, "SGI")) {
+		if (!strcmp(oem_table_id, "UVL"))
+			uv_system_type = UV_LEGACY_APIC;
+		else if (!strcmp(oem_table_id, "UVX"))
+			uv_system_type = UV_X2APIC;
+		else if (!strcmp(oem_table_id, "UVH")) {
+			uv_system_type = UV_NON_UNIQUE_APIC;
+			return 1;
+		}
+	}
+	return 0;
+}
+
+enum uv_system_type get_uv_system_type(void)
+{
+	return uv_system_type;
+}
+
+int is_uv_system(void)
+{
+	return uv_system_type != UV_NONE;
+}
+EXPORT_SYMBOL_GPL(is_uv_system);
+
 DEFINE_PER_CPU(struct uv_hub_info_s, __uv_hub_info);
 EXPORT_PER_CPU_SYMBOL_GPL(__uv_hub_info);
 
@@ -123,6 +153,10 @@ static int uv_apic_id_registered(void)
 	return 1;
 }
 
+static void uv_init_apic_ldr(void)
+{
+}
+
 static unsigned int uv_cpu_mask_to_apicid(cpumask_t cpumask)
 {
 	int cpu;
@@ -138,9 +172,34 @@ static unsigned int uv_cpu_mask_to_apicid(cpumask_t cpumask)
 		return BAD_APICID;
 }
 
+static unsigned int get_apic_id(unsigned long x)
+{
+	unsigned int id;
+
+	WARN_ON(preemptible() && num_online_cpus() > 1);
+	id = x | __get_cpu_var(x2apic_extra_bits);
+
+	return id;
+}
+
+static unsigned long set_apic_id(unsigned int id)
+{
+	unsigned long x;
+
+	/* maskout x2apic_extra_bits ? */
+	x = id;
+	return x;
+}
+
+static unsigned int uv_read_apic_id(void)
+{
+
+	return get_apic_id(apic_read(APIC_ID));
+}
+
 static unsigned int phys_pkg_id(int index_msb)
 {
-	return GET_APIC_ID(read_apic_id()) >> index_msb;
+	return uv_read_apic_id() >> index_msb;
 }
 
 #ifdef ZZZ		/* Needs x2apic patch */
@@ -152,17 +211,22 @@ static void uv_send_IPI_self(int vector)
 
 struct genapic apic_x2apic_uv_x = {
 	.name = "UV large system",
+	.acpi_madt_oem_check = uv_acpi_madt_oem_check,
 	.int_delivery_mode = dest_Fixed,
 	.int_dest_mode = (APIC_DEST_PHYSICAL != 0),
 	.target_cpus = uv_target_cpus,
 	.vector_allocation_domain = uv_vector_allocation_domain,/* Fixme ZZZ */
 	.apic_id_registered = uv_apic_id_registered,
+	.init_apic_ldr = uv_init_apic_ldr,
 	.send_IPI_all = uv_send_IPI_all,
 	.send_IPI_allbutself = uv_send_IPI_allbutself,
 	.send_IPI_mask = uv_send_IPI_mask,
 	/* ZZZ.send_IPI_self = uv_send_IPI_self, */
 	.cpu_mask_to_apicid = uv_cpu_mask_to_apicid,
 	.phys_pkg_id = phys_pkg_id,	/* Fixme ZZZ */
+	.get_apic_id = get_apic_id,
+	.set_apic_id = set_apic_id,
+	.apic_id_mask = (0xFFFFFFFFu),
 };
 
 static __cpuinit void set_x2apic_extra_bits(int pnode)
@@ -222,7 +286,7 @@ static __init void map_low_mmrs(void)
 
 enum map_type {map_wb, map_uc};
 
-static void map_high(char *id, unsigned long base, int shift, enum map_type map_type)
+static __init void map_high(char *id, unsigned long base, int shift, enum map_type map_type)
 {
 	unsigned long bytes, paddr;
 
@@ -293,7 +357,9 @@ static __init void uv_rtc_init(void)
 		sn_rtc_cycles_per_second = ticks_per_sec;
 }
 
-static __init void uv_system_init(void)
+static bool uv_system_inited;
+
+void __init uv_system_init(void)
 {
 	union uvh_si_addr_map_config_u m_n_config;
 	union uvh_node_id_u node_id;
@@ -383,6 +449,7 @@ static __init void uv_system_init(void)
 	map_mmr_high(max_pnode);
 	map_config_high(max_pnode);
 	map_mmioh_high(max_pnode);
+	uv_system_inited = true;
 }
 
 /*
@@ -391,11 +458,12 @@ static __init void uv_system_init(void)
  */
 void __cpuinit uv_cpu_init(void)
 {
-	if (!uv_node_to_blade)
-		uv_system_init();
+	BUG_ON(!uv_system_inited);
 
 	uv_blade_info[uv_numa_blade_id()].nr_online_cpus++;
 
 	if (get_uv_system_type() == UV_NON_UNIQUE_APIC)
 		set_x2apic_extra_bits(uv_hub_info->pnode);
 }
+
+
diff --git a/arch/x86/kernel/head64.c b/arch/x86/kernel/head64.c
index 1b318e903bf6..9bfc4d72fb2e 100644
--- a/arch/x86/kernel/head64.c
+++ b/arch/x86/kernel/head64.c
@@ -88,6 +88,7 @@ void __init x86_64_start_kernel(char * real_mode_data)
 	BUILD_BUG_ON(!(MODULES_VADDR > __START_KERNEL));
 	BUILD_BUG_ON(!(((MODULES_END - 1) & PGDIR_MASK) ==
 				(__START_KERNEL & PGDIR_MASK)));
+	BUILD_BUG_ON(__fix_to_virt(__end_of_fixed_addresses) <= MODULES_END);
 
 	/* clear bss before set_intr_gate with early_idt_handler */
 	clear_bss();
diff --git a/arch/x86/kernel/head_32.S b/arch/x86/kernel/head_32.S
index f67e93441caf..a7010c3a377a 100644
--- a/arch/x86/kernel/head_32.S
+++ b/arch/x86/kernel/head_32.S
@@ -456,9 +456,6 @@ is386:	movl $2,%ecx		# set MP
 1:
 #endif /* CONFIG_SMP */
 	jmp *(initial_code)
-.align 4
-ENTRY(initial_code)
-	.long i386_start_kernel
 
 /*
  * We depend on ET to be correct. This checks for 287/387.
@@ -601,6 +598,11 @@ ignore_int:
 #endif
 	iret
 
+.section .cpuinit.data,"wa"
+.align 4
+ENTRY(initial_code)
+	.long i386_start_kernel
+
 .section .text
 /*
  * Real beginning of normal "text" segment
diff --git a/arch/x86/kernel/hpet.c b/arch/x86/kernel/hpet.c
index ad2b15a1334d..59fd3b6b1303 100644
--- a/arch/x86/kernel/hpet.c
+++ b/arch/x86/kernel/hpet.c
@@ -359,6 +359,7 @@ static int hpet_clocksource_register(void)
 int __init hpet_enable(void)
 {
 	unsigned long id;
+	int i;
 
 	if (!is_hpet_capable())
 		return 0;
@@ -369,6 +370,29 @@ int __init hpet_enable(void)
 	 * Read the period and check for a sane value:
 	 */
 	hpet_period = hpet_readl(HPET_PERIOD);
+
+	/*
+	 * AMD SB700 based systems with spread spectrum enabled use a
+	 * SMM based HPET emulation to provide proper frequency
+	 * setting. The SMM code is initialized with the first HPET
+	 * register access and takes some time to complete. During
+	 * this time the config register reads 0xffffffff. We check
+	 * for max. 1000 loops whether the config register reads a non
+	 * 0xffffffff value to make sure that HPET is up and running
+	 * before we go further. A counting loop is safe, as the HPET
+	 * access takes thousands of CPU cycles. On non SB700 based
+	 * machines this check is only done once and has no side
+	 * effects.
+	 */
+	for (i = 0; hpet_readl(HPET_CFG) == 0xFFFFFFFF; i++) {
+		if (i == 1000) {
+			printk(KERN_WARNING
+			       "HPET config register value = 0xFFFFFFFF. "
+			       "Disabling HPET\n");
+			goto out_nohpet;
+		}
+	}
+
 	if (hpet_period < HPET_MIN_PERIOD || hpet_period > HPET_MAX_PERIOD)
 		goto out_nohpet;
 
diff --git a/arch/x86/kernel/i387.c b/arch/x86/kernel/i387.c
index eb9ddd8efb82..45723f1fe198 100644
--- a/arch/x86/kernel/i387.c
+++ b/arch/x86/kernel/i387.c
@@ -21,9 +21,12 @@
 # include <asm/sigcontext32.h>
 # include <asm/user32.h>
 #else
-# define save_i387_ia32		save_i387
-# define restore_i387_ia32	restore_i387
+# define save_i387_xstate_ia32		save_i387_xstate
+# define restore_i387_xstate_ia32	restore_i387_xstate
 # define _fpstate_ia32		_fpstate
+# define _xstate_ia32		_xstate
+# define sig_xstate_ia32_size   sig_xstate_size
+# define fx_sw_reserved_ia32	fx_sw_reserved
 # define user_i387_ia32_struct	user_i387_struct
 # define user32_fxsr_struct	user_fxsr_struct
 #endif
@@ -36,6 +39,7 @@
 
 static unsigned int		mxcsr_feature_mask __read_mostly = 0xffffffffu;
 unsigned int xstate_size;
+unsigned int sig_xstate_ia32_size = sizeof(struct _fpstate_ia32);
 static struct i387_fxsave_struct fx_scratch __cpuinitdata;
 
 void __cpuinit mxcsr_feature_mask_init(void)
@@ -61,6 +65,11 @@ void __init init_thread_xstate(void)
 		return;
 	}
 
+	if (cpu_has_xsave) {
+		xsave_cntxt_init();
+		return;
+	}
+
 	if (cpu_has_fxsr)
 		xstate_size = sizeof(struct i387_fxsave_struct);
 #ifdef CONFIG_X86_32
@@ -83,9 +92,19 @@ void __cpuinit fpu_init(void)
 
 	write_cr0(oldcr0 & ~(X86_CR0_TS|X86_CR0_EM)); /* clear TS and EM */
 
+	/*
+	 * Boot processor to setup the FP and extended state context info.
+	 */
+	if (!smp_processor_id())
+		init_thread_xstate();
+	xsave_init();
+
 	mxcsr_feature_mask_init();
 	/* clean state in init */
-	current_thread_info()->status = 0;
+	if (cpu_has_xsave)
+		current_thread_info()->status = TS_XSAVE;
+	else
+		current_thread_info()->status = 0;
 	clear_used_math();
 }
 #endif	/* CONFIG_X86_64 */
@@ -195,6 +214,13 @@ int xfpregs_set(struct task_struct *target, const struct user_regset *regset,
 	 */
 	target->thread.xstate->fxsave.mxcsr &= mxcsr_feature_mask;
 
+	/*
+	 * update the header bits in the xsave header, indicating the
+	 * presence of FP and SSE state.
+	 */
+	if (cpu_has_xsave)
+		target->thread.xstate->xsave.xsave_hdr.xstate_bv |= XSTATE_FPSSE;
+
 	return ret;
 }
 
@@ -395,6 +421,12 @@ int fpregs_set(struct task_struct *target, const struct user_regset *regset,
 	if (!ret)
 		convert_to_fxsr(target, &env);
 
+	/*
+	 * update the header bit in the xsave header, indicating the
+	 * presence of FP.
+	 */
+	if (cpu_has_xsave)
+		target->thread.xstate->xsave.xsave_hdr.xstate_bv |= XSTATE_FP;
 	return ret;
 }
 
@@ -407,7 +439,6 @@ static inline int save_i387_fsave(struct _fpstate_ia32 __user *buf)
 	struct task_struct *tsk = current;
 	struct i387_fsave_struct *fp = &tsk->thread.xstate->fsave;
 
-	unlazy_fpu(tsk);
 	fp->status = fp->swd;
 	if (__copy_to_user(buf, fp, sizeof(struct i387_fsave_struct)))
 		return -1;
@@ -421,8 +452,6 @@ static int save_i387_fxsave(struct _fpstate_ia32 __user *buf)
 	struct user_i387_ia32_struct env;
 	int err = 0;
 
-	unlazy_fpu(tsk);
-
 	convert_from_fxsr(&env, tsk);
 	if (__copy_to_user(buf, &env, sizeof(env)))
 		return -1;
@@ -432,16 +461,40 @@ static int save_i387_fxsave(struct _fpstate_ia32 __user *buf)
 	if (err)
 		return -1;
 
-	if (__copy_to_user(&buf->_fxsr_env[0], fx,
-			   sizeof(struct i387_fxsave_struct)))
+	if (__copy_to_user(&buf->_fxsr_env[0], fx, xstate_size))
 		return -1;
 	return 1;
 }
 
-int save_i387_ia32(struct _fpstate_ia32 __user *buf)
+static int save_i387_xsave(void __user *buf)
+{
+	struct _fpstate_ia32 __user *fx = buf;
+	int err = 0;
+
+	if (save_i387_fxsave(fx) < 0)
+		return -1;
+
+	err = __copy_to_user(&fx->sw_reserved, &fx_sw_reserved_ia32,
+			     sizeof(struct _fpx_sw_bytes));
+	err |= __put_user(FP_XSTATE_MAGIC2,
+			  (__u32 __user *) (buf + sig_xstate_ia32_size
+					    - FP_XSTATE_MAGIC2_SIZE));
+	if (err)
+		return -1;
+
+	return 1;
+}
+
+int save_i387_xstate_ia32(void __user *buf)
 {
+	struct _fpstate_ia32 __user *fp = (struct _fpstate_ia32 __user *) buf;
+	struct task_struct *tsk = current;
+
 	if (!used_math())
 		return 0;
+
+	if (!access_ok(VERIFY_WRITE, buf, sig_xstate_ia32_size))
+		return -EACCES;
 	/*
 	 * This will cause a "finit" to be triggered by the next
 	 * attempted FPU operation by the 'current' process.
@@ -451,13 +504,17 @@ int save_i387_ia32(struct _fpstate_ia32 __user *buf)
 	if (!HAVE_HWFP) {
 		return fpregs_soft_get(current, NULL,
 				       0, sizeof(struct user_i387_ia32_struct),
-				       NULL, buf) ? -1 : 1;
+				       NULL, fp) ? -1 : 1;
 	}
 
+	unlazy_fpu(tsk);
+
+	if (cpu_has_xsave)
+		return save_i387_xsave(fp);
 	if (cpu_has_fxsr)
-		return save_i387_fxsave(buf);
+		return save_i387_fxsave(fp);
 	else
-		return save_i387_fsave(buf);
+		return save_i387_fsave(fp);
 }
 
 static inline int restore_i387_fsave(struct _fpstate_ia32 __user *buf)
@@ -468,14 +525,15 @@ static inline int restore_i387_fsave(struct _fpstate_ia32 __user *buf)
 				sizeof(struct i387_fsave_struct));
 }
 
-static int restore_i387_fxsave(struct _fpstate_ia32 __user *buf)
+static int restore_i387_fxsave(struct _fpstate_ia32 __user *buf,
+			       unsigned int size)
 {
 	struct task_struct *tsk = current;
 	struct user_i387_ia32_struct env;
 	int err;
 
 	err = __copy_from_user(&tsk->thread.xstate->fxsave, &buf->_fxsr_env[0],
-			       sizeof(struct i387_fxsave_struct));
+			       size);
 	/* mxcsr reserved bits must be masked to zero for security reasons */
 	tsk->thread.xstate->fxsave.mxcsr &= mxcsr_feature_mask;
 	if (err || __copy_from_user(&env, buf, sizeof(env)))
@@ -485,14 +543,69 @@ static int restore_i387_fxsave(struct _fpstate_ia32 __user *buf)
 	return 0;
 }
 
-int restore_i387_ia32(struct _fpstate_ia32 __user *buf)
+static int restore_i387_xsave(void __user *buf)
+{
+	struct _fpx_sw_bytes fx_sw_user;
+	struct _fpstate_ia32 __user *fx_user =
+			((struct _fpstate_ia32 __user *) buf);
+	struct i387_fxsave_struct __user *fx =
+		(struct i387_fxsave_struct __user *) &fx_user->_fxsr_env[0];
+	struct xsave_hdr_struct *xsave_hdr =
+				&current->thread.xstate->xsave.xsave_hdr;
+	u64 mask;
+	int err;
+
+	if (check_for_xstate(fx, buf, &fx_sw_user))
+		goto fx_only;
+
+	mask = fx_sw_user.xstate_bv;
+
+	err = restore_i387_fxsave(buf, fx_sw_user.xstate_size);
+
+	xsave_hdr->xstate_bv &= pcntxt_mask;
+	/*
+	 * These bits must be zero.
+	 */
+	xsave_hdr->reserved1[0] = xsave_hdr->reserved1[1] = 0;
+
+	/*
+	 * Init the state that is not present in the memory layout
+	 * and enabled by the OS.
+	 */
+	mask = ~(pcntxt_mask & ~mask);
+	xsave_hdr->xstate_bv &= mask;
+
+	return err;
+fx_only:
+	/*
+	 * Couldn't find the extended state information in the memory
+	 * layout. Restore the FP/SSE and init the other extended state
+	 * enabled by the OS.
+	 */
+	xsave_hdr->xstate_bv = XSTATE_FPSSE;
+	return restore_i387_fxsave(buf, sizeof(struct i387_fxsave_struct));
+}
+
+int restore_i387_xstate_ia32(void __user *buf)
 {
 	int err;
 	struct task_struct *tsk = current;
+	struct _fpstate_ia32 __user *fp = (struct _fpstate_ia32 __user *) buf;
 
 	if (HAVE_HWFP)
 		clear_fpu(tsk);
 
+	if (!buf) {
+		if (used_math()) {
+			clear_fpu(tsk);
+			clear_used_math();
+		}
+
+		return 0;
+	} else
+		if (!access_ok(VERIFY_READ, buf, sig_xstate_ia32_size))
+			return -EACCES;
+
 	if (!used_math()) {
 		err = init_fpu(tsk);
 		if (err)
@@ -500,14 +613,17 @@ int restore_i387_ia32(struct _fpstate_ia32 __user *buf)
 	}
 
 	if (HAVE_HWFP) {
-		if (cpu_has_fxsr)
-			err = restore_i387_fxsave(buf);
+		if (cpu_has_xsave)
+			err = restore_i387_xsave(buf);
+		else if (cpu_has_fxsr)
+			err = restore_i387_fxsave(fp, sizeof(struct
+							   i387_fxsave_struct));
 		else
-			err = restore_i387_fsave(buf);
+			err = restore_i387_fsave(fp);
 	} else {
 		err = fpregs_soft_set(current, NULL,
 				      0, sizeof(struct user_i387_ia32_struct),
-				      NULL, buf) != 0;
+				      NULL, fp) != 0;
 	}
 	set_used_math();
 
diff --git a/arch/x86/kernel/i8259.c b/arch/x86/kernel/i8259.c
index dc92b49d9204..4b8a53d841f7 100644
--- a/arch/x86/kernel/i8259.c
+++ b/arch/x86/kernel/i8259.c
@@ -282,6 +282,30 @@ static int __init i8259A_init_sysfs(void)
 
 device_initcall(i8259A_init_sysfs);
 
+void mask_8259A(void)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&i8259A_lock, flags);
+
+	outb(0xff, PIC_MASTER_IMR);	/* mask all of 8259A-1 */
+	outb(0xff, PIC_SLAVE_IMR);	/* mask all of 8259A-2 */
+
+	spin_unlock_irqrestore(&i8259A_lock, flags);
+}
+
+void unmask_8259A(void)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&i8259A_lock, flags);
+
+	outb(cached_master_mask, PIC_MASTER_IMR); /* restore master IRQ mask */
+	outb(cached_slave_mask, PIC_SLAVE_IMR);	  /* restore slave IRQ mask */
+
+	spin_unlock_irqrestore(&i8259A_lock, flags);
+}
+
 void init_8259A(int auto_eoi)
 {
 	unsigned long flags;
diff --git a/arch/x86/kernel/io_apic_32.c b/arch/x86/kernel/io_apic_32.c
index de9aa0e3a9c5..e710289f673e 100644
--- a/arch/x86/kernel/io_apic_32.c
+++ b/arch/x86/kernel/io_apic_32.c
@@ -46,10 +46,13 @@
 #include <asm/nmi.h>
 #include <asm/msidef.h>
 #include <asm/hypertransport.h>
+#include <asm/setup.h>
 
 #include <mach_apic.h>
 #include <mach_apicdef.h>
 
+#define __apicdebuginit(type) static type __init
+
 int (*ioapic_renumber_irq)(int ioapic, int irq);
 atomic_t irq_mis_count;
 
@@ -57,7 +60,7 @@ atomic_t irq_mis_count;
 static struct { int pin, apic; } ioapic_i8259 = { -1, -1 };
 
 static DEFINE_SPINLOCK(ioapic_lock);
-static DEFINE_SPINLOCK(vector_lock);
+DEFINE_SPINLOCK(vector_lock);
 
 int timer_through_8259 __initdata;
 
@@ -1209,10 +1212,6 @@ static int assign_irq_vector(int irq)
 	return vector;
 }
 
-void setup_vector_irq(int cpu)
-{
-}
-
 static struct irq_chip ioapic_chip;
 
 #define IOAPIC_AUTO	-1
@@ -1345,7 +1344,8 @@ static void __init setup_timer_IRQ0_pin(unsigned int apic, unsigned int pin,
 	ioapic_write_entry(apic, pin, entry);
 }
 
-void __init print_IO_APIC(void)
+
+__apicdebuginit(void) print_IO_APIC(void)
 {
 	int apic, i;
 	union IO_APIC_reg_00 reg_00;
@@ -1460,9 +1460,7 @@ void __init print_IO_APIC(void)
 	return;
 }
 
-#if 0
-
-static void print_APIC_bitfield(int base)
+__apicdebuginit(void) print_APIC_bitfield(int base)
 {
 	unsigned int v;
 	int i, j;
@@ -1483,9 +1481,10 @@ static void print_APIC_bitfield(int base)
 	}
 }
 
-void /*__init*/ print_local_APIC(void *dummy)
+__apicdebuginit(void) print_local_APIC(void *dummy)
 {
 	unsigned int v, ver, maxlvt;
+	u64 icr;
 
 	if (apic_verbosity == APIC_QUIET)
 		return;
@@ -1494,7 +1493,7 @@ void /*__init*/ print_local_APIC(void *dummy)
 		smp_processor_id(), hard_smp_processor_id());
 	v = apic_read(APIC_ID);
 	printk(KERN_INFO "... APIC ID:      %08x (%01x)\n", v,
-			GET_APIC_ID(read_apic_id()));
+			GET_APIC_ID(v));
 	v = apic_read(APIC_LVR);
 	printk(KERN_INFO "... APIC VERSION: %08x\n", v);
 	ver = GET_APIC_VERSION(v);
@@ -1536,10 +1535,9 @@ void /*__init*/ print_local_APIC(void *dummy)
 		printk(KERN_DEBUG "... APIC ESR: %08x\n", v);
 	}
 
-	v = apic_read(APIC_ICR);
-	printk(KERN_DEBUG "... APIC ICR: %08x\n", v);
-	v = apic_read(APIC_ICR2);
-	printk(KERN_DEBUG "... APIC ICR2: %08x\n", v);
+	icr = apic_icr_read();
+	printk(KERN_DEBUG "... APIC ICR: %08x\n", icr);
+	printk(KERN_DEBUG "... APIC ICR2: %08x\n", icr >> 32);
 
 	v = apic_read(APIC_LVTT);
 	printk(KERN_DEBUG "... APIC LVTT: %08x\n", v);
@@ -1567,12 +1565,12 @@ void /*__init*/ print_local_APIC(void *dummy)
 	printk("\n");
 }
 
-void print_all_local_APICs(void)
+__apicdebuginit(void) print_all_local_APICs(void)
 {
 	on_each_cpu(print_local_APIC, NULL, 1);
 }
 
-void /*__init*/ print_PIC(void)
+__apicdebuginit(void) print_PIC(void)
 {
 	unsigned int v;
 	unsigned long flags;
@@ -1604,7 +1602,17 @@ void /*__init*/ print_PIC(void)
 	printk(KERN_DEBUG "... PIC ELCR: %04x\n", v);
 }
 
-#endif  /*  0  */
+__apicdebuginit(int) print_all_ICs(void)
+{
+	print_PIC();
+	print_all_local_APICs();
+	print_IO_APIC();
+
+	return 0;
+}
+
+fs_initcall(print_all_ICs);
+
 
 static void __init enable_IO_APIC(void)
 {
@@ -1702,8 +1710,7 @@ void disable_IO_APIC(void)
 		entry.dest_mode       = 0; /* Physical */
 		entry.delivery_mode   = dest_ExtINT; /* ExtInt */
 		entry.vector          = 0;
-		entry.dest.physical.physical_dest =
-					GET_APIC_ID(read_apic_id());
+		entry.dest.physical.physical_dest = read_apic_id();
 
 		/*
 		 * Add it to the IO-APIC irq-routing table:
@@ -1729,10 +1736,8 @@ static void __init setup_ioapic_ids_from_mpc(void)
 	unsigned char old_id;
 	unsigned long flags;
 
-#ifdef CONFIG_X86_NUMAQ
-	if (found_numaq)
+	if (x86_quirks->setup_ioapic_ids && x86_quirks->setup_ioapic_ids())
 		return;
-#endif
 
 	/*
 	 * Don't check I/O APIC IDs for xAPIC systems.  They have
@@ -2333,8 +2338,6 @@ void __init setup_IO_APIC(void)
 	setup_IO_APIC_irqs();
 	init_IO_APIC_traps();
 	check_timer();
-	if (!acpi_ioapic)
-		print_IO_APIC();
 }
 
 /*
diff --git a/arch/x86/kernel/io_apic_64.c b/arch/x86/kernel/io_apic_64.c
index 8269434d1707..a1bec2969c6a 100644
--- a/arch/x86/kernel/io_apic_64.c
+++ b/arch/x86/kernel/io_apic_64.c
@@ -37,6 +37,7 @@
 #include <acpi/acpi_bus.h>
 #endif
 #include <linux/bootmem.h>
+#include <linux/dmar.h>
 
 #include <asm/idle.h>
 #include <asm/io.h>
@@ -49,10 +50,13 @@
 #include <asm/nmi.h>
 #include <asm/msidef.h>
 #include <asm/hypertransport.h>
+#include <asm/irq_remapping.h>
 
 #include <mach_ipi.h>
 #include <mach_apic.h>
 
+#define __apicdebuginit(type) static type __init
+
 struct irq_cfg {
 	cpumask_t domain;
 	cpumask_t old_domain;
@@ -87,8 +91,6 @@ int first_system_vector = 0xfe;
 
 char system_vectors[NR_VECTORS] = { [0 ... NR_VECTORS-1] = SYS_VECTOR_FREE};
 
-#define __apicdebuginit  __init
-
 int sis_apic_bug; /* not actually supported, dummy for compile */
 
 static int no_timer_check;
@@ -101,13 +103,16 @@ int timer_through_8259 __initdata;
 static struct { int pin, apic; } ioapic_i8259 = { -1, -1 };
 
 static DEFINE_SPINLOCK(ioapic_lock);
-DEFINE_SPINLOCK(vector_lock);
+static DEFINE_SPINLOCK(vector_lock);
 
 /*
  * # of IRQ routing registers
  */
 int nr_ioapic_registers[MAX_IO_APICS];
 
+/* I/O APIC RTE contents at the OS boot up */
+struct IO_APIC_route_entry *early_ioapic_entries[MAX_IO_APICS];
+
 /* I/O APIC entries */
 struct mp_config_ioapic mp_ioapics[MAX_IO_APICS];
 int nr_ioapics;
@@ -303,7 +308,12 @@ static void __target_IO_APIC_irq(unsigned int irq, unsigned int dest, u8 vector)
 		pin = entry->pin;
 		if (pin == -1)
 			break;
-		io_apic_write(apic, 0x11 + pin*2, dest);
+		/*
+		 * With interrupt-remapping, destination information comes
+		 * from interrupt-remapping table entry.
+		 */
+		if (!irq_remapped(irq))
+			io_apic_write(apic, 0x11 + pin*2, dest);
 		reg = io_apic_read(apic, 0x10 + pin*2);
 		reg &= ~IO_APIC_REDIR_VECTOR_MASK;
 		reg |= vector;
@@ -440,6 +450,69 @@ static void clear_IO_APIC (void)
 			clear_IO_APIC_pin(apic, pin);
 }
 
+/*
+ * Saves and masks all the unmasked IO-APIC RTE's
+ */
+int save_mask_IO_APIC_setup(void)
+{
+	union IO_APIC_reg_01 reg_01;
+	unsigned long flags;
+	int apic, pin;
+
+	/*
+	 * The number of IO-APIC IRQ registers (== #pins):
+	 */
+	for (apic = 0; apic < nr_ioapics; apic++) {
+		spin_lock_irqsave(&ioapic_lock, flags);
+		reg_01.raw = io_apic_read(apic, 1);
+		spin_unlock_irqrestore(&ioapic_lock, flags);
+		nr_ioapic_registers[apic] = reg_01.bits.entries+1;
+	}
+
+	for (apic = 0; apic < nr_ioapics; apic++) {
+		early_ioapic_entries[apic] =
+			kzalloc(sizeof(struct IO_APIC_route_entry) *
+				nr_ioapic_registers[apic], GFP_KERNEL);
+		if (!early_ioapic_entries[apic])
+			return -ENOMEM;
+	}
+
+	for (apic = 0; apic < nr_ioapics; apic++)
+		for (pin = 0; pin < nr_ioapic_registers[apic]; pin++) {
+			struct IO_APIC_route_entry entry;
+
+			entry = early_ioapic_entries[apic][pin] =
+				ioapic_read_entry(apic, pin);
+			if (!entry.mask) {
+				entry.mask = 1;
+				ioapic_write_entry(apic, pin, entry);
+			}
+		}
+	return 0;
+}
+
+void restore_IO_APIC_setup(void)
+{
+	int apic, pin;
+
+	for (apic = 0; apic < nr_ioapics; apic++)
+		for (pin = 0; pin < nr_ioapic_registers[apic]; pin++)
+			ioapic_write_entry(apic, pin,
+					   early_ioapic_entries[apic][pin]);
+}
+
+void reinit_intr_remapped_IO_APIC(int intr_remapping)
+{
+	/*
+	 * for now plain restore of previous settings.
+	 * TBD: In the case of OS enabling interrupt-remapping,
+	 * IO-APIC RTE's need to be setup to point to interrupt-remapping
+	 * table entries. for now, do a plain restore, and wait for
+	 * the setup_IO_APIC_irqs() to do proper initialization.
+	 */
+	restore_IO_APIC_setup();
+}
+
 int skip_ioapic_setup;
 int ioapic_force;
 
@@ -697,6 +770,19 @@ static int pin_2_irq(int idx, int apic, int pin)
 	return irq;
 }
 
+void lock_vector_lock(void)
+{
+	/* Used to the online set of cpus does not change
+	 * during assign_irq_vector.
+	 */
+	spin_lock(&vector_lock);
+}
+
+void unlock_vector_lock(void)
+{
+	spin_unlock(&vector_lock);
+}
+
 static int __assign_irq_vector(int irq, cpumask_t mask)
 {
 	/*
@@ -802,7 +888,7 @@ static void __clear_irq_vector(int irq)
 	cpus_clear(cfg->domain);
 }
 
-static void __setup_vector_irq(int cpu)
+void __setup_vector_irq(int cpu)
 {
 	/* Initialize vector_irq on a new cpu */
 	/* This function must be called with vector_lock held */
@@ -825,27 +911,99 @@ static void __setup_vector_irq(int cpu)
 	}
 }
 
-void setup_vector_irq(int cpu)
-{
-	spin_lock(&vector_lock);
-	__setup_vector_irq(smp_processor_id());
-	spin_unlock(&vector_lock);
-}
-
-
 static struct irq_chip ioapic_chip;
+#ifdef CONFIG_INTR_REMAP
+static struct irq_chip ir_ioapic_chip;
+#endif
 
 static void ioapic_register_intr(int irq, unsigned long trigger)
 {
-	if (trigger) {
+	if (trigger)
 		irq_desc[irq].status |= IRQ_LEVEL;
-		set_irq_chip_and_handler_name(irq, &ioapic_chip,
-					      handle_fasteoi_irq, "fasteoi");
-	} else {
+	else
 		irq_desc[irq].status &= ~IRQ_LEVEL;
+
+#ifdef CONFIG_INTR_REMAP
+	if (irq_remapped(irq)) {
+		irq_desc[irq].status |= IRQ_MOVE_PCNTXT;
+		if (trigger)
+			set_irq_chip_and_handler_name(irq, &ir_ioapic_chip,
+						      handle_fasteoi_irq,
+						     "fasteoi");
+		else
+			set_irq_chip_and_handler_name(irq, &ir_ioapic_chip,
+						      handle_edge_irq, "edge");
+		return;
+	}
+#endif
+	if (trigger)
+		set_irq_chip_and_handler_name(irq, &ioapic_chip,
+					      handle_fasteoi_irq,
+					      "fasteoi");
+	else
 		set_irq_chip_and_handler_name(irq, &ioapic_chip,
 					      handle_edge_irq, "edge");
+}
+
+static int setup_ioapic_entry(int apic, int irq,
+			      struct IO_APIC_route_entry *entry,
+			      unsigned int destination, int trigger,
+			      int polarity, int vector)
+{
+	/*
+	 * add it to the IO-APIC irq-routing table:
+	 */
+	memset(entry,0,sizeof(*entry));
+
+#ifdef CONFIG_INTR_REMAP
+	if (intr_remapping_enabled) {
+		struct intel_iommu *iommu = map_ioapic_to_ir(apic);
+		struct irte irte;
+		struct IR_IO_APIC_route_entry *ir_entry =
+			(struct IR_IO_APIC_route_entry *) entry;
+		int index;
+
+		if (!iommu)
+			panic("No mapping iommu for ioapic %d\n", apic);
+
+		index = alloc_irte(iommu, irq, 1);
+		if (index < 0)
+			panic("Failed to allocate IRTE for ioapic %d\n", apic);
+
+		memset(&irte, 0, sizeof(irte));
+
+		irte.present = 1;
+		irte.dst_mode = INT_DEST_MODE;
+		irte.trigger_mode = trigger;
+		irte.dlvry_mode = INT_DELIVERY_MODE;
+		irte.vector = vector;
+		irte.dest_id = IRTE_DEST(destination);
+
+		modify_irte(irq, &irte);
+
+		ir_entry->index2 = (index >> 15) & 0x1;
+		ir_entry->zero = 0;
+		ir_entry->format = 1;
+		ir_entry->index = (index & 0x7fff);
+	} else
+#endif
+	{
+		entry->delivery_mode = INT_DELIVERY_MODE;
+		entry->dest_mode = INT_DEST_MODE;
+		entry->dest = destination;
 	}
+
+	entry->mask = 0;				/* enable IRQ */
+	entry->trigger = trigger;
+	entry->polarity = polarity;
+	entry->vector = vector;
+
+	/* Mask level triggered irqs.
+	 * Use IRQ_DELAYED_DISABLE for edge triggered irqs.
+	 */
+	if (trigger)
+		entry->mask = 1;
+	return 0;
 }
 
 static void setup_IO_APIC_irq(int apic, int pin, unsigned int irq,
@@ -870,24 +1028,15 @@ static void setup_IO_APIC_irq(int apic, int pin, unsigned int irq,
 		    apic, mp_ioapics[apic].mp_apicid, pin, cfg->vector,
 		    irq, trigger, polarity);
 
-	/*
-	 * add it to the IO-APIC irq-routing table:
-	 */
-	memset(&entry,0,sizeof(entry));
-
-	entry.delivery_mode = INT_DELIVERY_MODE;
-	entry.dest_mode = INT_DEST_MODE;
-	entry.dest = cpu_mask_to_apicid(mask);
-	entry.mask = 0;				/* enable IRQ */
-	entry.trigger = trigger;
-	entry.polarity = polarity;
-	entry.vector = cfg->vector;
 
-	/* Mask level triggered irqs.
-	 * Use IRQ_DELAYED_DISABLE for edge triggered irqs.
-	 */
-	if (trigger)
-		entry.mask = 1;
+	if (setup_ioapic_entry(mp_ioapics[apic].mp_apicid, irq, &entry,
+			       cpu_mask_to_apicid(mask), trigger, polarity,
+			       cfg->vector)) {
+		printk("Failed to setup ioapic entry for ioapic  %d, pin %d\n",
+		       mp_ioapics[apic].mp_apicid, pin);
+		__clear_irq_vector(irq);
+		return;
+	}
 
 	ioapic_register_intr(irq, trigger);
 	if (irq < 16)
@@ -939,6 +1088,9 @@ static void __init setup_timer_IRQ0_pin(unsigned int apic, unsigned int pin,
 {
 	struct IO_APIC_route_entry entry;
 
+	if (intr_remapping_enabled)
+		return;
+
 	memset(&entry, 0, sizeof(entry));
 
 	/*
@@ -965,7 +1117,8 @@ static void __init setup_timer_IRQ0_pin(unsigned int apic, unsigned int pin,
 	ioapic_write_entry(apic, pin, entry);
 }
 
-void __apicdebuginit print_IO_APIC(void)
+
+__apicdebuginit(void) print_IO_APIC(void)
 {
 	int apic, i;
 	union IO_APIC_reg_00 reg_00;
@@ -1059,9 +1212,7 @@ void __apicdebuginit print_IO_APIC(void)
 	return;
 }
 
-#if 0
-
-static __apicdebuginit void print_APIC_bitfield (int base)
+__apicdebuginit(void) print_APIC_bitfield(int base)
 {
 	unsigned int v;
 	int i, j;
@@ -1082,9 +1233,10 @@ static __apicdebuginit void print_APIC_bitfield (int base)
 	}
 }
 
-void __apicdebuginit print_local_APIC(void * dummy)
+__apicdebuginit(void) print_local_APIC(void *dummy)
 {
 	unsigned int v, ver, maxlvt;
+	unsigned long icr;
 
 	if (apic_verbosity == APIC_QUIET)
 		return;
@@ -1092,7 +1244,7 @@ void __apicdebuginit print_local_APIC(void * dummy)
 	printk("\n" KERN_DEBUG "printing local APIC contents on CPU#%d/%d:\n",
 		smp_processor_id(), hard_smp_processor_id());
 	v = apic_read(APIC_ID);
-	printk(KERN_INFO "... APIC ID:      %08x (%01x)\n", v, GET_APIC_ID(read_apic_id()));
+	printk(KERN_INFO "... APIC ID:      %08x (%01x)\n", v, read_apic_id());
 	v = apic_read(APIC_LVR);
 	printk(KERN_INFO "... APIC VERSION: %08x\n", v);
 	ver = GET_APIC_VERSION(v);
@@ -1128,10 +1280,9 @@ void __apicdebuginit print_local_APIC(void * dummy)
 	v = apic_read(APIC_ESR);
 	printk(KERN_DEBUG "... APIC ESR: %08x\n", v);
 
-	v = apic_read(APIC_ICR);
-	printk(KERN_DEBUG "... APIC ICR: %08x\n", v);
-	v = apic_read(APIC_ICR2);
-	printk(KERN_DEBUG "... APIC ICR2: %08x\n", v);
+	icr = apic_icr_read();
+	printk(KERN_DEBUG "... APIC ICR: %08x\n", icr);
+	printk(KERN_DEBUG "... APIC ICR2: %08x\n", icr >> 32);
 
 	v = apic_read(APIC_LVTT);
 	printk(KERN_DEBUG "... APIC LVTT: %08x\n", v);
@@ -1159,12 +1310,12 @@ void __apicdebuginit print_local_APIC(void * dummy)
 	printk("\n");
 }
 
-void print_all_local_APICs (void)
+__apicdebuginit(void) print_all_local_APICs(void)
 {
 	on_each_cpu(print_local_APIC, NULL, 1);
 }
 
-void __apicdebuginit print_PIC(void)
+__apicdebuginit(void) print_PIC(void)
 {
 	unsigned int v;
 	unsigned long flags;
@@ -1196,7 +1347,17 @@ void __apicdebuginit print_PIC(void)
 	printk(KERN_DEBUG "... PIC ELCR: %04x\n", v);
 }
 
-#endif  /*  0  */
+__apicdebuginit(int) print_all_ICs(void)
+{
+	print_PIC();
+	print_all_local_APICs();
+	print_IO_APIC();
+
+	return 0;
+}
+
+fs_initcall(print_all_ICs);
+
 
 void __init enable_IO_APIC(void)
 {
@@ -1286,7 +1447,7 @@ void disable_IO_APIC(void)
 		entry.dest_mode       = 0; /* Physical */
 		entry.delivery_mode   = dest_ExtINT; /* ExtInt */
 		entry.vector          = 0;
-		entry.dest          = GET_APIC_ID(read_apic_id());
+		entry.dest            = read_apic_id();
 
 		/*
 		 * Add it to the IO-APIC irq-routing table:
@@ -1392,6 +1553,147 @@ static int ioapic_retrigger_irq(unsigned int irq)
  */
 
 #ifdef CONFIG_SMP
+
+#ifdef CONFIG_INTR_REMAP
+static void ir_irq_migration(struct work_struct *work);
+
+static DECLARE_DELAYED_WORK(ir_migration_work, ir_irq_migration);
+
+/*
+ * Migrate the IO-APIC irq in the presence of intr-remapping.
+ *
+ * For edge triggered, irq migration is a simple atomic update(of vector
+ * and cpu destination) of IRTE and flush the hardware cache.
+ *
+ * For level triggered, we need to modify the io-apic RTE aswell with the update
+ * vector information, along with modifying IRTE with vector and destination.
+ * So irq migration for level triggered is little  bit more complex compared to
+ * edge triggered migration. But the good news is, we use the same algorithm
+ * for level triggered migration as we have today, only difference being,
+ * we now initiate the irq migration from process context instead of the
+ * interrupt context.
+ *
+ * In future, when we do a directed EOI (combined with cpu EOI broadcast
+ * suppression) to the IO-APIC, level triggered irq migration will also be
+ * as simple as edge triggered migration and we can do the irq migration
+ * with a simple atomic update to IO-APIC RTE.
+ */
+static void migrate_ioapic_irq(int irq, cpumask_t mask)
+{
+	struct irq_cfg *cfg = irq_cfg + irq;
+	struct irq_desc *desc = irq_desc + irq;
+	cpumask_t tmp, cleanup_mask;
+	struct irte irte;
+	int modify_ioapic_rte = desc->status & IRQ_LEVEL;
+	unsigned int dest;
+	unsigned long flags;
+
+	cpus_and(tmp, mask, cpu_online_map);
+	if (cpus_empty(tmp))
+		return;
+
+	if (get_irte(irq, &irte))
+		return;
+
+	if (assign_irq_vector(irq, mask))
+		return;
+
+	cpus_and(tmp, cfg->domain, mask);
+	dest = cpu_mask_to_apicid(tmp);
+
+	if (modify_ioapic_rte) {
+		spin_lock_irqsave(&ioapic_lock, flags);
+		__target_IO_APIC_irq(irq, dest, cfg->vector);
+		spin_unlock_irqrestore(&ioapic_lock, flags);
+	}
+
+	irte.vector = cfg->vector;
+	irte.dest_id = IRTE_DEST(dest);
+
+	/*
+	 * Modified the IRTE and flushes the Interrupt entry cache.
+	 */
+	modify_irte(irq, &irte);
+
+	if (cfg->move_in_progress) {
+		cpus_and(cleanup_mask, cfg->old_domain, cpu_online_map);
+		cfg->move_cleanup_count = cpus_weight(cleanup_mask);
+		send_IPI_mask(cleanup_mask, IRQ_MOVE_CLEANUP_VECTOR);
+		cfg->move_in_progress = 0;
+	}
+
+	irq_desc[irq].affinity = mask;
+}
+
+static int migrate_irq_remapped_level(int irq)
+{
+	int ret = -1;
+
+	mask_IO_APIC_irq(irq);
+
+	if (io_apic_level_ack_pending(irq)) {
+		/*
+	 	 * Interrupt in progress. Migrating irq now will change the
+		 * vector information in the IO-APIC RTE and that will confuse
+		 * the EOI broadcast performed by cpu.
+		 * So, delay the irq migration to the next instance.
+		 */
+		schedule_delayed_work(&ir_migration_work, 1);
+		goto unmask;
+	}
+
+	/* everthing is clear. we have right of way */
+	migrate_ioapic_irq(irq, irq_desc[irq].pending_mask);
+
+	ret = 0;
+	irq_desc[irq].status &= ~IRQ_MOVE_PENDING;
+	cpus_clear(irq_desc[irq].pending_mask);
+
+unmask:
+	unmask_IO_APIC_irq(irq);
+	return ret;
+}
+
+static void ir_irq_migration(struct work_struct *work)
+{
+	int irq;
+
+	for (irq = 0; irq < NR_IRQS; irq++) {
+		struct irq_desc *desc = irq_desc + irq;
+		if (desc->status & IRQ_MOVE_PENDING) {
+			unsigned long flags;
+
+			spin_lock_irqsave(&desc->lock, flags);
+			if (!desc->chip->set_affinity ||
+			    !(desc->status & IRQ_MOVE_PENDING)) {
+				desc->status &= ~IRQ_MOVE_PENDING;
+				spin_unlock_irqrestore(&desc->lock, flags);
+				continue;
+			}
+
+			desc->chip->set_affinity(irq,
+					         irq_desc[irq].pending_mask);
+			spin_unlock_irqrestore(&desc->lock, flags);
+		}
+	}
+}
+
+/*
+ * Migrates the IRQ destination in the process context.
+ */
+static void set_ir_ioapic_affinity_irq(unsigned int irq, cpumask_t mask)
+{
+	if (irq_desc[irq].status & IRQ_LEVEL) {
+		irq_desc[irq].status |= IRQ_MOVE_PENDING;
+		irq_desc[irq].pending_mask = mask;
+		migrate_irq_remapped_level(irq);
+		return;
+	}
+
+	migrate_ioapic_irq(irq, mask);
+}
+#endif
+
 asmlinkage void smp_irq_move_cleanup_interrupt(void)
 {
 	unsigned vector, me;
@@ -1448,6 +1750,17 @@ static void irq_complete_move(unsigned int irq)
 #else
 static inline void irq_complete_move(unsigned int irq) {}
 #endif
+#ifdef CONFIG_INTR_REMAP
+static void ack_x2apic_level(unsigned int irq)
+{
+	ack_x2APIC_irq();
+}
+
+static void ack_x2apic_edge(unsigned int irq)
+{
+	ack_x2APIC_irq();
+}
+#endif
 
 static void ack_apic_edge(unsigned int irq)
 {
@@ -1522,6 +1835,21 @@ static struct irq_chip ioapic_chip __read_mostly = {
 	.retrigger	= ioapic_retrigger_irq,
 };
 
+#ifdef CONFIG_INTR_REMAP
+static struct irq_chip ir_ioapic_chip __read_mostly = {
+	.name 		= "IR-IO-APIC",
+	.startup 	= startup_ioapic_irq,
+	.mask	 	= mask_IO_APIC_irq,
+	.unmask	 	= unmask_IO_APIC_irq,
+	.ack 		= ack_x2apic_edge,
+	.eoi 		= ack_x2apic_level,
+#ifdef CONFIG_SMP
+	.set_affinity 	= set_ir_ioapic_affinity_irq,
+#endif
+	.retrigger	= ioapic_retrigger_irq,
+};
+#endif
+
 static inline void init_IO_APIC_traps(void)
 {
 	int irq;
@@ -1707,6 +2035,8 @@ static inline void __init check_timer(void)
 	 * 8259A.
 	 */
 	if (pin1 == -1) {
+		if (intr_remapping_enabled)
+			panic("BIOS bug: timer not connected to IO-APIC");
 		pin1 = pin2;
 		apic1 = apic2;
 		no_pin1 = 1;
@@ -1733,6 +2063,8 @@ static inline void __init check_timer(void)
 				clear_IO_APIC_pin(0, pin1);
 			goto out;
 		}
+		if (intr_remapping_enabled)
+			panic("timer doesn't work through Interrupt-remapped IO-APIC");
 		clear_IO_APIC_pin(apic1, pin1);
 		if (!no_pin1)
 			apic_printk(APIC_QUIET, KERN_ERR "..MP-BIOS bug: "
@@ -1849,8 +2181,6 @@ void __init setup_IO_APIC(void)
 	setup_IO_APIC_irqs();
 	init_IO_APIC_traps();
 	check_timer();
-	if (!acpi_ioapic)
-		print_IO_APIC();
 }
 
 struct sysfs_ioapic_data {
@@ -1972,6 +2302,9 @@ void destroy_irq(unsigned int irq)
 
 	dynamic_irq_cleanup(irq);
 
+#ifdef CONFIG_INTR_REMAP
+	free_irte(irq);
+#endif
 	spin_lock_irqsave(&vector_lock, flags);
 	__clear_irq_vector(irq);
 	spin_unlock_irqrestore(&vector_lock, flags);
@@ -1990,10 +2323,41 @@ static int msi_compose_msg(struct pci_dev *pdev, unsigned int irq, struct msi_ms
 
 	tmp = TARGET_CPUS;
 	err = assign_irq_vector(irq, tmp);
-	if (!err) {
-		cpus_and(tmp, cfg->domain, tmp);
-		dest = cpu_mask_to_apicid(tmp);
+	if (err)
+		return err;
+
+	cpus_and(tmp, cfg->domain, tmp);
+	dest = cpu_mask_to_apicid(tmp);
+
+#ifdef CONFIG_INTR_REMAP
+	if (irq_remapped(irq)) {
+		struct irte irte;
+		int ir_index;
+		u16 sub_handle;
+
+		ir_index = map_irq_to_irte_handle(irq, &sub_handle);
+		BUG_ON(ir_index == -1);
 
+		memset (&irte, 0, sizeof(irte));
+
+		irte.present = 1;
+		irte.dst_mode = INT_DEST_MODE;
+		irte.trigger_mode = 0; /* edge */
+		irte.dlvry_mode = INT_DELIVERY_MODE;
+		irte.vector = cfg->vector;
+		irte.dest_id = IRTE_DEST(dest);
+
+		modify_irte(irq, &irte);
+
+		msg->address_hi = MSI_ADDR_BASE_HI;
+		msg->data = sub_handle;
+		msg->address_lo = MSI_ADDR_BASE_LO | MSI_ADDR_IR_EXT_INT |
+				  MSI_ADDR_IR_SHV |
+				  MSI_ADDR_IR_INDEX1(ir_index) |
+				  MSI_ADDR_IR_INDEX2(ir_index);
+	} else
+#endif
+	{
 		msg->address_hi = MSI_ADDR_BASE_HI;
 		msg->address_lo =
 			MSI_ADDR_BASE_LO |
@@ -2044,6 +2408,55 @@ static void set_msi_irq_affinity(unsigned int irq, cpumask_t mask)
 	write_msi_msg(irq, &msg);
 	irq_desc[irq].affinity = mask;
 }
+
+#ifdef CONFIG_INTR_REMAP
+/*
+ * Migrate the MSI irq to another cpumask. This migration is
+ * done in the process context using interrupt-remapping hardware.
+ */
+static void ir_set_msi_irq_affinity(unsigned int irq, cpumask_t mask)
+{
+	struct irq_cfg *cfg = irq_cfg + irq;
+	unsigned int dest;
+	cpumask_t tmp, cleanup_mask;
+	struct irte irte;
+
+	cpus_and(tmp, mask, cpu_online_map);
+	if (cpus_empty(tmp))
+		return;
+
+	if (get_irte(irq, &irte))
+		return;
+
+	if (assign_irq_vector(irq, mask))
+		return;
+
+	cpus_and(tmp, cfg->domain, mask);
+	dest = cpu_mask_to_apicid(tmp);
+
+	irte.vector = cfg->vector;
+	irte.dest_id = IRTE_DEST(dest);
+
+	/*
+	 * atomically update the IRTE with the new destination and vector.
+	 */
+	modify_irte(irq, &irte);
+
+	/*
+	 * After this point, all the interrupts will start arriving
+	 * at the new destination. So, time to cleanup the previous
+	 * vector allocation.
+	 */
+	if (cfg->move_in_progress) {
+		cpus_and(cleanup_mask, cfg->old_domain, cpu_online_map);
+		cfg->move_cleanup_count = cpus_weight(cleanup_mask);
+		send_IPI_mask(cleanup_mask, IRQ_MOVE_CLEANUP_VECTOR);
+		cfg->move_in_progress = 0;
+	}
+
+	irq_desc[irq].affinity = mask;
+}
+#endif
 #endif /* CONFIG_SMP */
 
 /*
@@ -2061,26 +2474,157 @@ static struct irq_chip msi_chip = {
 	.retrigger	= ioapic_retrigger_irq,
 };
 
-int arch_setup_msi_irq(struct pci_dev *dev, struct msi_desc *desc)
+#ifdef CONFIG_INTR_REMAP
+static struct irq_chip msi_ir_chip = {
+	.name		= "IR-PCI-MSI",
+	.unmask		= unmask_msi_irq,
+	.mask		= mask_msi_irq,
+	.ack		= ack_x2apic_edge,
+#ifdef CONFIG_SMP
+	.set_affinity	= ir_set_msi_irq_affinity,
+#endif
+	.retrigger	= ioapic_retrigger_irq,
+};
+
+/*
+ * Map the PCI dev to the corresponding remapping hardware unit
+ * and allocate 'nvec' consecutive interrupt-remapping table entries
+ * in it.
+ */
+static int msi_alloc_irte(struct pci_dev *dev, int irq, int nvec)
 {
+	struct intel_iommu *iommu;
+	int index;
+
+	iommu = map_dev_to_ir(dev);
+	if (!iommu) {
+		printk(KERN_ERR
+		       "Unable to map PCI %s to iommu\n", pci_name(dev));
+		return -ENOENT;
+	}
+
+	index = alloc_irte(iommu, irq, nvec);
+	if (index < 0) {
+		printk(KERN_ERR
+		       "Unable to allocate %d IRTE for PCI %s\n", nvec,
+		        pci_name(dev));
+		return -ENOSPC;
+	}
+	return index;
+}
+#endif
+
+static int setup_msi_irq(struct pci_dev *dev, struct msi_desc *desc, int irq)
+{
+	int ret;
 	struct msi_msg msg;
+
+	ret = msi_compose_msg(dev, irq, &msg);
+	if (ret < 0)
+		return ret;
+
+	set_irq_msi(irq, desc);
+	write_msi_msg(irq, &msg);
+
+#ifdef CONFIG_INTR_REMAP
+	if (irq_remapped(irq)) {
+		struct irq_desc *desc = irq_desc + irq;
+		/*
+		 * irq migration in process context
+		 */
+		desc->status |= IRQ_MOVE_PCNTXT;
+		set_irq_chip_and_handler_name(irq, &msi_ir_chip, handle_edge_irq, "edge");
+	} else
+#endif
+		set_irq_chip_and_handler_name(irq, &msi_chip, handle_edge_irq, "edge");
+
+	return 0;
+}
+
+int arch_setup_msi_irq(struct pci_dev *dev, struct msi_desc *desc)
+{
 	int irq, ret;
+
 	irq = create_irq();
 	if (irq < 0)
 		return irq;
 
-	ret = msi_compose_msg(dev, irq, &msg);
+#ifdef CONFIG_INTR_REMAP
+	if (!intr_remapping_enabled)
+		goto no_ir;
+
+	ret = msi_alloc_irte(dev, irq, 1);
+	if (ret < 0)
+		goto error;
+no_ir:
+#endif
+	ret = setup_msi_irq(dev, desc, irq);
 	if (ret < 0) {
 		destroy_irq(irq);
 		return ret;
 	}
+	return 0;
 
-	set_irq_msi(irq, desc);
-	write_msi_msg(irq, &msg);
+#ifdef CONFIG_INTR_REMAP
+error:
+	destroy_irq(irq);
+	return ret;
+#endif
+}
+
+int arch_setup_msi_irqs(struct pci_dev *dev, int nvec, int type)
+{
+	int irq, ret, sub_handle;
+	struct msi_desc *desc;
+#ifdef CONFIG_INTR_REMAP
+	struct intel_iommu *iommu = 0;
+	int index = 0;
+#endif
 
-	set_irq_chip_and_handler_name(irq, &msi_chip, handle_edge_irq, "edge");
+	sub_handle = 0;
+	list_for_each_entry(desc, &dev->msi_list, list) {
+		irq = create_irq();
+		if (irq < 0)
+			return irq;
+#ifdef CONFIG_INTR_REMAP
+		if (!intr_remapping_enabled)
+			goto no_ir;
 
+		if (!sub_handle) {
+			/*
+			 * allocate the consecutive block of IRTE's
+			 * for 'nvec'
+			 */
+			index = msi_alloc_irte(dev, irq, nvec);
+			if (index < 0) {
+				ret = index;
+				goto error;
+			}
+		} else {
+			iommu = map_dev_to_ir(dev);
+			if (!iommu) {
+				ret = -ENOENT;
+				goto error;
+			}
+			/*
+			 * setup the mapping between the irq and the IRTE
+			 * base index, the sub_handle pointing to the
+			 * appropriate interrupt remap table entry.
+			 */
+			set_irte_irq(irq, iommu, index, sub_handle);
+		}
+no_ir:
+#endif
+		ret = setup_msi_irq(dev, desc, irq);
+		if (ret < 0)
+			goto error;
+		sub_handle++;
+	}
 	return 0;
+
+error:
+	destroy_irq(irq);
+	return ret;
 }
 
 void arch_teardown_msi_irq(unsigned int irq)
@@ -2328,6 +2872,10 @@ void __init setup_ioapic_dest(void)
 				setup_IO_APIC_irq(ioapic, pin, irq,
 						  irq_trigger(irq_entry),
 						  irq_polarity(irq_entry));
+#ifdef CONFIG_INTR_REMAP
+			else if (intr_remapping_enabled)
+				set_ir_ioapic_affinity_irq(irq, TARGET_CPUS);
+#endif
 			else
 				set_ioapic_affinity_irq(irq, TARGET_CPUS);
 		}
diff --git a/arch/x86/kernel/ioport.c b/arch/x86/kernel/ioport.c
index 50e5e4a31c85..191914302744 100644
--- a/arch/x86/kernel/ioport.c
+++ b/arch/x86/kernel/ioport.c
@@ -14,6 +14,7 @@
 #include <linux/slab.h>
 #include <linux/thread_info.h>
 #include <linux/syscalls.h>
+#include <asm/syscalls.h>
 
 /* Set EXTENT bits starting at BASE in BITMAP to value TURN_ON. */
 static void set_bitmap(unsigned long *bitmap, unsigned int base,
diff --git a/arch/x86/kernel/ipi.c b/arch/x86/kernel/ipi.c
index 3f7537b669d3..f1c688e46f35 100644
--- a/arch/x86/kernel/ipi.c
+++ b/arch/x86/kernel/ipi.c
@@ -20,6 +20,8 @@
 
 #ifdef CONFIG_X86_32
 #include <mach_apic.h>
+#include <mach_ipi.h>
+
 /*
  * the following functions deal with sending IPIs between CPUs.
  *
@@ -147,7 +149,6 @@ void send_IPI_mask_sequence(cpumask_t mask, int vector)
 }
 
 /* must come after the send_IPI functions above for inlining */
-#include <mach_ipi.h>
 static int convert_apicid_to_cpu(int apic_id)
 {
 	int i;
diff --git a/arch/x86/kernel/irqinit_32.c b/arch/x86/kernel/irqinit_32.c
index d66914287ee1..9200a1e2752d 100644
--- a/arch/x86/kernel/irqinit_32.c
+++ b/arch/x86/kernel/irqinit_32.c
@@ -74,6 +74,15 @@ void __init init_ISA_irqs (void)
 	}
 }
 
+/*
+ * IRQ2 is cascade interrupt to second interrupt controller
+ */
+static struct irqaction irq2 = {
+	.handler = no_action,
+	.mask = CPU_MASK_NONE,
+	.name = "cascade",
+};
+
 /* Overridden in paravirt.c */
 void init_IRQ(void) __attribute__((weak, alias("native_init_IRQ")));
 
@@ -98,6 +107,46 @@ void __init native_init_IRQ(void)
 			set_intr_gate(vector, interrupt[i]);
 	}
 
+#if defined(CONFIG_X86_LOCAL_APIC) && defined(CONFIG_SMP)
+	/*
+	 * IRQ0 must be given a fixed assignment and initialized,
+	 * because it's used before the IO-APIC is set up.
+	 */
+	set_intr_gate(FIRST_DEVICE_VECTOR, interrupt[0]);
+
+	/*
+	 * The reschedule interrupt is a CPU-to-CPU reschedule-helper
+	 * IPI, driven by wakeup.
+	 */
+	alloc_intr_gate(RESCHEDULE_VECTOR, reschedule_interrupt);
+
+	/* IPI for invalidation */
+	alloc_intr_gate(INVALIDATE_TLB_VECTOR, invalidate_interrupt);
+
+	/* IPI for generic function call */
+	alloc_intr_gate(CALL_FUNCTION_VECTOR, call_function_interrupt);
+
+	/* IPI for single call function */
+	set_intr_gate(CALL_FUNCTION_SINGLE_VECTOR, call_function_single_interrupt);
+#endif
+
+#ifdef CONFIG_X86_LOCAL_APIC
+	/* self generated IPI for local APIC timer */
+	alloc_intr_gate(LOCAL_TIMER_VECTOR, apic_timer_interrupt);
+
+	/* IPI vectors for APIC spurious and error interrupts */
+	alloc_intr_gate(SPURIOUS_APIC_VECTOR, spurious_interrupt);
+	alloc_intr_gate(ERROR_APIC_VECTOR, error_interrupt);
+#endif
+
+#if defined(CONFIG_X86_LOCAL_APIC) && defined(CONFIG_X86_MCE_P4THERMAL)
+	/* thermal monitor LVT interrupt */
+	alloc_intr_gate(THERMAL_APIC_VECTOR, thermal_interrupt);
+#endif
+
+	if (!acpi_ioapic)
+		setup_irq(2, &irq2);
+
 	/* setup after call gates are initialised (usually add in
 	 * the architecture specific gates)
 	 */
diff --git a/arch/x86/kernel/kprobes.c b/arch/x86/kernel/kprobes.c
index 43c019f85f0d..6c27679ec6aa 100644
--- a/arch/x86/kernel/kprobes.c
+++ b/arch/x86/kernel/kprobes.c
@@ -431,7 +431,6 @@ static void __kprobes prepare_singlestep(struct kprobe *p, struct pt_regs *regs)
 		regs->ip = (unsigned long)p->ainsn.insn;
 }
 
-/* Called with kretprobe_lock held */
 void __kprobes arch_prepare_kretprobe(struct kretprobe_instance *ri,
 				      struct pt_regs *regs)
 {
@@ -682,8 +681,7 @@ static __used __kprobes void *trampoline_handler(struct pt_regs *regs)
 	unsigned long trampoline_address = (unsigned long)&kretprobe_trampoline;
 
 	INIT_HLIST_HEAD(&empty_rp);
-	spin_lock_irqsave(&kretprobe_lock, flags);
-	head = kretprobe_inst_table_head(current);
+	kretprobe_hash_lock(current, &head, &flags);
 	/* fixup registers */
 #ifdef CONFIG_X86_64
 	regs->cs = __KERNEL_CS;
@@ -732,7 +730,7 @@ static __used __kprobes void *trampoline_handler(struct pt_regs *regs)
 
 	kretprobe_assert(ri, orig_ret_address, trampoline_address);
 
-	spin_unlock_irqrestore(&kretprobe_lock, flags);
+	kretprobe_hash_unlock(current, &flags);
 
 	hlist_for_each_entry_safe(ri, node, tmp, &empty_rp, hlist) {
 		hlist_del(&ri->hlist);
diff --git a/arch/x86/kernel/ldt.c b/arch/x86/kernel/ldt.c
index 3fee2aa50f3f..0ed5f939b905 100644
--- a/arch/x86/kernel/ldt.c
+++ b/arch/x86/kernel/ldt.c
@@ -18,6 +18,7 @@
 #include <asm/ldt.h>
 #include <asm/desc.h>
 #include <asm/mmu_context.h>
+#include <asm/syscalls.h>
 
 #ifdef CONFIG_SMP
 static void flush_ldt(void *current_mm)
@@ -62,12 +63,10 @@ static int alloc_ldt(mm_context_t *pc, int mincount, int reload)
 
 	if (reload) {
 #ifdef CONFIG_SMP
-		cpumask_of_cpu_ptr_declare(mask);
-
 		preempt_disable();
 		load_LDT(pc);
-		cpumask_of_cpu_ptr_next(mask, smp_processor_id());
-		if (!cpus_equal(current->mm->cpu_vm_mask, *mask))
+		if (!cpus_equal(current->mm->cpu_vm_mask,
+				cpumask_of_cpu(smp_processor_id())))
 			smp_call_function(flush_ldt, current->mm, 1);
 		preempt_enable();
 #else
diff --git a/arch/x86/kernel/machine_kexec_32.c b/arch/x86/kernel/machine_kexec_32.c
index 8864230d55af..0732adba05ca 100644
--- a/arch/x86/kernel/machine_kexec_32.c
+++ b/arch/x86/kernel/machine_kexec_32.c
@@ -12,6 +12,7 @@
 #include <linux/init.h>
 #include <linux/numa.h>
 #include <linux/ftrace.h>
+#include <linux/suspend.h>
 
 #include <asm/pgtable.h>
 #include <asm/pgalloc.h>
@@ -22,6 +23,7 @@
 #include <asm/cpufeature.h>
 #include <asm/desc.h>
 #include <asm/system.h>
+#include <asm/cacheflush.h>
 
 #define PAGE_ALIGNED __attribute__ ((__aligned__(PAGE_SIZE)))
 static u32 kexec_pgd[1024] PAGE_ALIGNED;
@@ -77,7 +79,7 @@ static void load_segments(void)
 /*
  * A architecture hook called to validate the
  * proposed image and prepare the control pages
- * as needed.  The pages for KEXEC_CONTROL_CODE_SIZE
+ * as needed.  The pages for KEXEC_CONTROL_PAGE_SIZE
  * have been allocated, but the segments have yet
  * been copied into the kernel.
  *
@@ -85,10 +87,12 @@ static void load_segments(void)
  * reboot code buffer to allow us to avoid allocations
  * later.
  *
- * Currently nothing.
+ * Make control page executable.
  */
 int machine_kexec_prepare(struct kimage *image)
 {
+	if (nx_enabled)
+		set_pages_x(image->control_code_page, 1);
 	return 0;
 }
 
@@ -98,27 +102,54 @@ int machine_kexec_prepare(struct kimage *image)
  */
 void machine_kexec_cleanup(struct kimage *image)
 {
+	if (nx_enabled)
+		set_pages_nx(image->control_code_page, 1);
 }
 
 /*
  * Do not allocate memory (or fail in any way) in machine_kexec().
  * We are past the point of no return, committed to rebooting now.
  */
-NORET_TYPE void machine_kexec(struct kimage *image)
+void machine_kexec(struct kimage *image)
 {
 	unsigned long page_list[PAGES_NR];
 	void *control_page;
+	int save_ftrace_enabled;
+	asmlinkage unsigned long
+		(*relocate_kernel_ptr)(unsigned long indirection_page,
+				       unsigned long control_page,
+				       unsigned long start_address,
+				       unsigned int has_pae,
+				       unsigned int preserve_context);
+
+#ifdef CONFIG_KEXEC_JUMP
+	if (kexec_image->preserve_context)
+		save_processor_state();
+#endif
 
-	tracer_disable();
+	save_ftrace_enabled = __ftrace_enabled_save();
 
 	/* Interrupts aren't acceptable while we reboot */
 	local_irq_disable();
 
+	if (image->preserve_context) {
+#ifdef CONFIG_X86_IO_APIC
+		/* We need to put APICs in legacy mode so that we can
+		 * get timer interrupts in second kernel. kexec/kdump
+		 * paths already have calls to disable_IO_APIC() in
+		 * one form or other. kexec jump path also need
+		 * one.
+		 */
+		disable_IO_APIC();
+#endif
+	}
+
 	control_page = page_address(image->control_code_page);
-	memcpy(control_page, relocate_kernel, PAGE_SIZE);
+	memcpy(control_page, relocate_kernel, KEXEC_CONTROL_CODE_MAX_SIZE);
 
+	relocate_kernel_ptr = control_page;
 	page_list[PA_CONTROL_PAGE] = __pa(control_page);
-	page_list[VA_CONTROL_PAGE] = (unsigned long)relocate_kernel;
+	page_list[VA_CONTROL_PAGE] = (unsigned long)control_page;
 	page_list[PA_PGD] = __pa(kexec_pgd);
 	page_list[VA_PGD] = (unsigned long)kexec_pgd;
 #ifdef CONFIG_X86_PAE
@@ -131,6 +162,7 @@ NORET_TYPE void machine_kexec(struct kimage *image)
 	page_list[VA_PTE_0] = (unsigned long)kexec_pte0;
 	page_list[PA_PTE_1] = __pa(kexec_pte1);
 	page_list[VA_PTE_1] = (unsigned long)kexec_pte1;
+	page_list[PA_SWAP_PAGE] = (page_to_pfn(image->swap_page) << PAGE_SHIFT);
 
 	/* The segment registers are funny things, they have both a
 	 * visible and an invisible part.  Whenever the visible part is
@@ -149,8 +181,17 @@ NORET_TYPE void machine_kexec(struct kimage *image)
 	set_idt(phys_to_virt(0),0);
 
 	/* now call it */
-	relocate_kernel((unsigned long)image->head, (unsigned long)page_list,
-			image->start, cpu_has_pae);
+	image->start = relocate_kernel_ptr((unsigned long)image->head,
+					   (unsigned long)page_list,
+					   image->start, cpu_has_pae,
+					   image->preserve_context);
+
+#ifdef CONFIG_KEXEC_JUMP
+	if (kexec_image->preserve_context)
+		restore_processor_state();
+#endif
+
+	__ftrace_enabled_restore(save_ftrace_enabled);
 }
 
 void arch_crash_save_vmcoreinfo(void)
diff --git a/arch/x86/kernel/machine_kexec_64.c b/arch/x86/kernel/machine_kexec_64.c
index 9dd9262693a3..c43caa3a91f3 100644
--- a/arch/x86/kernel/machine_kexec_64.c
+++ b/arch/x86/kernel/machine_kexec_64.c
@@ -181,7 +181,7 @@ void machine_kexec_cleanup(struct kimage *image)
  * Do not allocate memory (or fail in any way) in machine_kexec().
  * We are past the point of no return, committed to rebooting now.
  */
-NORET_TYPE void machine_kexec(struct kimage *image)
+void machine_kexec(struct kimage *image)
 {
 	unsigned long page_list[PAGES_NR];
 	void *control_page;
diff --git a/arch/x86/kernel/mfgpt_32.c b/arch/x86/kernel/mfgpt_32.c
index 07c0f828f488..3b599518c322 100644
--- a/arch/x86/kernel/mfgpt_32.c
+++ b/arch/x86/kernel/mfgpt_32.c
@@ -33,6 +33,8 @@
 #include <linux/module.h>
 #include <asm/geode.h>
 
+#define MFGPT_DEFAULT_IRQ	7
+
 static struct mfgpt_timer_t {
 	unsigned int avail:1;
 } mfgpt_timers[MFGPT_MAX_TIMERS];
@@ -157,29 +159,48 @@ int geode_mfgpt_toggle_event(int timer, int cmp, int event, int enable)
 }
 EXPORT_SYMBOL_GPL(geode_mfgpt_toggle_event);
 
-int geode_mfgpt_set_irq(int timer, int cmp, int irq, int enable)
+int geode_mfgpt_set_irq(int timer, int cmp, int *irq, int enable)
 {
-	u32 val, dummy;
-	int offset;
+	u32 zsel, lpc, dummy;
+	int shift;
 
 	if (timer < 0 || timer >= MFGPT_MAX_TIMERS)
 		return -EIO;
 
-	if (geode_mfgpt_toggle_event(timer, cmp, MFGPT_EVENT_IRQ, enable))
+	/*
+	 * Unfortunately, MFGPTs come in pairs sharing their IRQ lines. If VSA
+	 * is using the same CMP of the timer's Siamese twin, the IRQ is set to
+	 * 2, and we mustn't use nor change it.
+	 * XXX: Likewise, 2 Linux drivers might clash if the 2nd overwrites the
+	 * IRQ of the 1st. This can only happen if forcing an IRQ, calling this
+	 * with *irq==0 is safe. Currently there _are_ no 2 drivers.
+	 */
+	rdmsr(MSR_PIC_ZSEL_LOW, zsel, dummy);
+	shift = ((cmp == MFGPT_CMP1 ? 0 : 4) + timer % 4) * 4;
+	if (((zsel >> shift) & 0xF) == 2)
 		return -EIO;
 
-	rdmsr(MSR_PIC_ZSEL_LOW, val, dummy);
+	/* Choose IRQ: if none supplied, keep IRQ already set or use default */
+	if (!*irq)
+		*irq = (zsel >> shift) & 0xF;
+	if (!*irq)
+		*irq = MFGPT_DEFAULT_IRQ;
 
-	offset = (timer % 4) * 4;
-
-	val &= ~((0xF << offset) | (0xF << (offset + 16)));
+	/* Can't use IRQ if it's 0 (=disabled), 2, or routed to LPC */
+	if (*irq < 1 || *irq == 2 || *irq > 15)
+		return -EIO;
+	rdmsr(MSR_PIC_IRQM_LPC, lpc, dummy);
+	if (lpc & (1 << *irq))
+		return -EIO;
 
+	/* All chosen and checked - go for it */
+	if (geode_mfgpt_toggle_event(timer, cmp, MFGPT_EVENT_IRQ, enable))
+		return -EIO;
 	if (enable) {
-		val |= (irq & 0x0F) << (offset);
-		val |= (irq & 0x0F) << (offset + 16);
+		zsel = (zsel & ~(0xF << shift)) | (*irq << shift);
+		wrmsr(MSR_PIC_ZSEL_LOW, zsel, dummy);
 	}
 
-	wrmsr(MSR_PIC_ZSEL_LOW, val, dummy);
 	return 0;
 }
 
@@ -242,7 +263,7 @@ EXPORT_SYMBOL_GPL(geode_mfgpt_alloc_timer);
 static unsigned int mfgpt_tick_mode = CLOCK_EVT_MODE_SHUTDOWN;
 static u16 mfgpt_event_clock;
 
-static int irq = 7;
+static int irq;
 static int __init mfgpt_setup(char *str)
 {
 	get_option(&str, &irq);
@@ -346,7 +367,7 @@ int __init mfgpt_timer_setup(void)
 	mfgpt_event_clock = timer;
 
 	/* Set up the IRQ on the MFGPT side */
-	if (geode_mfgpt_setup_irq(mfgpt_event_clock, MFGPT_CMP2, irq)) {
+	if (geode_mfgpt_setup_irq(mfgpt_event_clock, MFGPT_CMP2, &irq)) {
 		printk(KERN_ERR "mfgpt-timer:  Could not set up IRQ %d\n", irq);
 		return -EIO;
 	}
@@ -374,13 +395,14 @@ int __init mfgpt_timer_setup(void)
 			&mfgpt_clockevent);
 
 	printk(KERN_INFO
-	       "mfgpt-timer:  registering the MFGPT timer as a clock event.\n");
+	       "mfgpt-timer:  Registering MFGPT timer %d as a clock event, using IRQ %d\n",
+	       timer, irq);
 	clockevents_register_device(&mfgpt_clockevent);
 
 	return 0;
 
 err:
-	geode_mfgpt_release_irq(mfgpt_event_clock, MFGPT_CMP2, irq);
+	geode_mfgpt_release_irq(mfgpt_event_clock, MFGPT_CMP2, &irq);
 	printk(KERN_ERR
 	       "mfgpt-timer:  Unable to set up the MFGPT clock source\n");
 	return -EIO;
diff --git a/arch/x86/kernel/microcode.c b/arch/x86/kernel/microcode.c
index 6994c751590e..652fa5c38ebe 100644
--- a/arch/x86/kernel/microcode.c
+++ b/arch/x86/kernel/microcode.c
@@ -388,7 +388,6 @@ static int do_microcode_update (void)
 	void *new_mc = NULL;
 	int cpu;
 	cpumask_t old;
-	cpumask_of_cpu_ptr_declare(newmask);
 
 	old = current->cpus_allowed;
 
@@ -405,8 +404,7 @@ static int do_microcode_update (void)
 
 			if (!uci->valid)
 				continue;
-			cpumask_of_cpu_ptr_next(newmask, cpu);
-			set_cpus_allowed_ptr(current, newmask);
+			set_cpus_allowed_ptr(current, &cpumask_of_cpu(cpu));
 			error = get_maching_microcode(new_mc, cpu);
 			if (error < 0)
 				goto out;
@@ -576,7 +574,6 @@ static int apply_microcode_check_cpu(int cpu)
 	struct cpuinfo_x86 *c = &cpu_data(cpu);
 	struct ucode_cpu_info *uci = ucode_cpu_info + cpu;
 	cpumask_t old;
-	cpumask_of_cpu_ptr(newmask, cpu);
 	unsigned int val[2];
 	int err = 0;
 
@@ -585,7 +582,7 @@ static int apply_microcode_check_cpu(int cpu)
 		return 0;
 
 	old = current->cpus_allowed;
-	set_cpus_allowed_ptr(current, newmask);
+	set_cpus_allowed_ptr(current, &cpumask_of_cpu(cpu));
 
 	/* Check if the microcode we have in memory matches the CPU */
 	if (c->x86_vendor != X86_VENDOR_INTEL || c->x86 < 6 ||
@@ -623,12 +620,11 @@ static int apply_microcode_check_cpu(int cpu)
 static void microcode_init_cpu(int cpu, int resume)
 {
 	cpumask_t old;
-	cpumask_of_cpu_ptr(newmask, cpu);
 	struct ucode_cpu_info *uci = ucode_cpu_info + cpu;
 
 	old = current->cpus_allowed;
 
-	set_cpus_allowed_ptr(current, newmask);
+	set_cpus_allowed_ptr(current, &cpumask_of_cpu(cpu));
 	mutex_lock(&microcode_mutex);
 	collect_cpu_info(cpu);
 	if (uci->valid && system_state == SYSTEM_RUNNING && !resume)
@@ -661,13 +657,10 @@ static ssize_t reload_store(struct sys_device *dev,
 	if (end == buf)
 		return -EINVAL;
 	if (val == 1) {
-		cpumask_t old;
-		cpumask_of_cpu_ptr(newmask, cpu);
-
-		old = current->cpus_allowed;
+		cpumask_t old = current->cpus_allowed;
 
 		get_online_cpus();
-		set_cpus_allowed_ptr(current, newmask);
+		set_cpus_allowed_ptr(current, &cpumask_of_cpu(cpu));
 
 		mutex_lock(&microcode_mutex);
 		if (uci->valid)
diff --git a/arch/x86/kernel/mmconf-fam10h_64.c b/arch/x86/kernel/mmconf-fam10h_64.c
index fdfdc550b366..efc2f361fe85 100644
--- a/arch/x86/kernel/mmconf-fam10h_64.c
+++ b/arch/x86/kernel/mmconf-fam10h_64.c
@@ -238,7 +238,7 @@ static struct dmi_system_id __devinitdata mmconf_dmi_table[] = {
 	{}
 };
 
-void __init check_enable_amd_mmconf_dmi(void)
+void __cpuinit check_enable_amd_mmconf_dmi(void)
 {
 	dmi_check_system(mmconf_dmi_table);
 }
diff --git a/arch/x86/kernel/mpparse.c b/arch/x86/kernel/mpparse.c
index 6ae005ccaed8..f98f4e1dba09 100644
--- a/arch/x86/kernel/mpparse.c
+++ b/arch/x86/kernel/mpparse.c
@@ -49,7 +49,7 @@ static int __init mpf_checksum(unsigned char *mp, int len)
 	return sum & 0xFF;
 }
 
-static void __cpuinit MP_processor_info(struct mpc_config_processor *m)
+static void __init MP_processor_info(struct mpc_config_processor *m)
 {
 	int apicid;
 	char *bootup_cpu = "";
@@ -83,7 +83,7 @@ static void __init MP_bus_info(struct mpc_config_bus *m)
 	if (x86_quirks->mpc_oem_bus_info)
 		x86_quirks->mpc_oem_bus_info(m, str);
 	else
-		printk(KERN_INFO "Bus #%d is %s\n", m->mpc_busid, str);
+		apic_printk(APIC_VERBOSE, "Bus #%d is %s\n", m->mpc_busid, str);
 
 #if MAX_MP_BUSSES < 256
 	if (m->mpc_busid >= MAX_MP_BUSSES) {
@@ -154,7 +154,7 @@ static void __init MP_ioapic_info(struct mpc_config_ioapic *m)
 
 static void print_MP_intsrc_info(struct mpc_config_intsrc *m)
 {
-	printk(KERN_CONT "Int: type %d, pol %d, trig %d, bus %02x,"
+	apic_printk(APIC_VERBOSE, "Int: type %d, pol %d, trig %d, bus %02x,"
 		" IRQ %02x, APIC ID %x, APIC INT %02x\n",
 		m->mpc_irqtype, m->mpc_irqflag & 3,
 		(m->mpc_irqflag >> 2) & 3, m->mpc_srcbus,
@@ -163,7 +163,7 @@ static void print_MP_intsrc_info(struct mpc_config_intsrc *m)
 
 static void __init print_mp_irq_info(struct mp_config_intsrc *mp_irq)
 {
-	printk(KERN_CONT "Int: type %d, pol %d, trig %d, bus %02x,"
+	apic_printk(APIC_VERBOSE, "Int: type %d, pol %d, trig %d, bus %02x,"
 		" IRQ %02x, APIC ID %x, APIC INT %02x\n",
 		mp_irq->mp_irqtype, mp_irq->mp_irqflag & 3,
 		(mp_irq->mp_irqflag >> 2) & 3, mp_irq->mp_srcbus,
@@ -235,7 +235,7 @@ static void __init MP_intsrc_info(struct mpc_config_intsrc *m)
 
 static void __init MP_lintsrc_info(struct mpc_config_lintsrc *m)
 {
-	printk(KERN_INFO "Lint: type %d, pol %d, trig %d, bus %02x,"
+	apic_printk(APIC_VERBOSE, "Lint: type %d, pol %d, trig %d, bus %02x,"
 		" IRQ %02x, APIC ID %x, APIC LINT %02x\n",
 		m->mpc_irqtype, m->mpc_irqflag & 3,
 		(m->mpc_irqflag >> 2) & 3, m->mpc_srcbusid,
@@ -397,7 +397,9 @@ static int __init smp_read_mpc(struct mp_config_table *mpc, unsigned early)
        generic_bigsmp_probe();
 #endif
 
+#ifdef CONFIG_X86_32
 	setup_apic_routing();
+#endif
 	if (!num_processors)
 		printk(KERN_ERR "MPTABLE: no processors registered!\n");
 	return num_processors;
@@ -484,7 +486,7 @@ static void __init construct_default_ioirq_mptable(int mpc_default_type)
 }
 
 
-static void construct_ioapic_table(int mpc_default_type)
+static void __init construct_ioapic_table(int mpc_default_type)
 {
 	struct mpc_config_ioapic ioapic;
 	struct mpc_config_bus bus;
@@ -529,7 +531,7 @@ static void construct_ioapic_table(int mpc_default_type)
 	construct_default_ioirq_mptable(mpc_default_type);
 }
 #else
-static inline void construct_ioapic_table(int mpc_default_type) { }
+static inline void __init construct_ioapic_table(int mpc_default_type) { }
 #endif
 
 static inline void __init construct_default_ISA_mptable(int mpc_default_type)
@@ -695,7 +697,8 @@ static int __init smp_scan_config(unsigned long base, unsigned long length,
 	unsigned int *bp = phys_to_virt(base);
 	struct intel_mp_floating *mpf;
 
-	printk(KERN_DEBUG "Scan SMP from %p for %ld bytes.\n", bp, length);
+	apic_printk(APIC_VERBOSE, "Scan SMP from %p for %ld bytes.\n",
+			bp, length);
 	BUILD_BUG_ON(sizeof(*mpf) != 16);
 
 	while (length > 0) {
diff --git a/arch/x86/kernel/msr.c b/arch/x86/kernel/msr.c
index 9fd809552447..2e2af5d18191 100644
--- a/arch/x86/kernel/msr.c
+++ b/arch/x86/kernel/msr.c
@@ -72,21 +72,28 @@ static ssize_t msr_read(struct file *file, char __user *buf,
 	u32 data[2];
 	u32 reg = *ppos;
 	int cpu = iminor(file->f_path.dentry->d_inode);
-	int err;
+	int err = 0;
+	ssize_t bytes = 0;
 
 	if (count % 8)
 		return -EINVAL;	/* Invalid chunk size */
 
 	for (; count; count -= 8) {
 		err = rdmsr_safe_on_cpu(cpu, reg, &data[0], &data[1]);
-		if (err)
-			return -EIO;
-		if (copy_to_user(tmp, &data, 8))
-			return -EFAULT;
+		if (err) {
+			if (err == -EFAULT) /* Fix idiotic error code */
+				err = -EIO;
+			break;
+		}
+		if (copy_to_user(tmp, &data, 8)) {
+			err = -EFAULT;
+			break;
+		}
 		tmp += 2;
+		bytes += 8;
 	}
 
-	return ((char __user *)tmp) - buf;
+	return bytes ? bytes : err;
 }
 
 static ssize_t msr_write(struct file *file, const char __user *buf,
@@ -96,21 +103,28 @@ static ssize_t msr_write(struct file *file, const char __user *buf,
 	u32 data[2];
 	u32 reg = *ppos;
 	int cpu = iminor(file->f_path.dentry->d_inode);
-	int err;
+	int err = 0;
+	ssize_t bytes = 0;
 
 	if (count % 8)
 		return -EINVAL;	/* Invalid chunk size */
 
 	for (; count; count -= 8) {
-		if (copy_from_user(&data, tmp, 8))
-			return -EFAULT;
+		if (copy_from_user(&data, tmp, 8)) {
+			err = -EFAULT;
+			break;
+		}
 		err = wrmsr_safe_on_cpu(cpu, reg, data[0], data[1]);
-		if (err)
-			return -EIO;
+		if (err) {
+			if (err == -EFAULT) /* Fix idiotic error code */
+				err = -EIO;
+			break;
+		}
 		tmp += 2;
+		bytes += 8;
 	}
 
-	return ((char __user *)tmp) - buf;
+	return bytes ? bytes : err;
 }
 
 static int msr_open(struct inode *inode, struct file *file)
@@ -131,7 +145,7 @@ static int msr_open(struct inode *inode, struct file *file)
 		ret = -EIO;	/* MSR not supported */
 out:
 	unlock_kernel();
-	return 0;
+	return ret;
 }
 
 /*
diff --git a/arch/x86/kernel/nmi.c b/arch/x86/kernel/nmi.c
index ac6d51222e7d..abb78a2cc4ad 100644
--- a/arch/x86/kernel/nmi.c
+++ b/arch/x86/kernel/nmi.c
@@ -114,6 +114,23 @@ static __init void nmi_cpu_busy(void *data)
 }
 #endif
 
+static void report_broken_nmi(int cpu, int *prev_nmi_count)
+{
+	printk(KERN_CONT "\n");
+
+	printk(KERN_WARNING
+		"WARNING: CPU#%d: NMI appears to be stuck (%d->%d)!\n",
+			cpu, prev_nmi_count[cpu], get_nmi_count(cpu));
+
+	printk(KERN_WARNING
+		"Please report this to bugzilla.kernel.org,\n");
+	printk(KERN_WARNING
+		"and attach the output of the 'dmesg' command.\n");
+
+	per_cpu(wd_enabled, cpu) = 0;
+	atomic_dec(&nmi_active);
+}
+
 int __init check_nmi_watchdog(void)
 {
 	unsigned int *prev_nmi_count;
@@ -141,15 +158,8 @@ int __init check_nmi_watchdog(void)
 	for_each_online_cpu(cpu) {
 		if (!per_cpu(wd_enabled, cpu))
 			continue;
-		if (get_nmi_count(cpu) - prev_nmi_count[cpu] <= 5) {
-			printk(KERN_WARNING "WARNING: CPU#%d: NMI "
-				"appears to be stuck (%d->%d)!\n",
-				cpu,
-				prev_nmi_count[cpu],
-				get_nmi_count(cpu));
-			per_cpu(wd_enabled, cpu) = 0;
-			atomic_dec(&nmi_active);
-		}
+		if (get_nmi_count(cpu) - prev_nmi_count[cpu] <= 5)
+			report_broken_nmi(cpu, prev_nmi_count);
 	}
 	endflag = 1;
 	if (!atomic_read(&nmi_active)) {
diff --git a/arch/x86/kernel/numaq_32.c b/arch/x86/kernel/numaq_32.c
index b8c45610b20a..4caff39078e0 100644
--- a/arch/x86/kernel/numaq_32.c
+++ b/arch/x86/kernel/numaq_32.c
@@ -73,7 +73,7 @@ static void __init smp_dump_qct(void)
 }
 
 
-void __init numaq_tsc_disable(void)
+void __cpuinit numaq_tsc_disable(void)
 {
 	if (!found_numaq)
 		return;
@@ -229,6 +229,12 @@ static void __init smp_read_mpc_oem(struct mp_config_oemtable *oemtable,
 	}
 }
 
+static int __init numaq_setup_ioapic_ids(void)
+{
+	/* so can skip it */
+	return 1;
+}
+
 static struct x86_quirks numaq_x86_quirks __initdata = {
 	.arch_pre_time_init	= numaq_pre_time_init,
 	.arch_time_init		= NULL,
@@ -243,6 +249,7 @@ static struct x86_quirks numaq_x86_quirks __initdata = {
 	.mpc_oem_bus_info	= mpc_oem_bus_info,
 	.mpc_oem_pci_bus	= mpc_oem_pci_bus,
 	.smp_read_mpc_oem	= smp_read_mpc_oem,
+	.setup_ioapic_ids	= numaq_setup_ioapic_ids,
 };
 
 void numaq_mps_oem_check(struct mp_config_table *mpc, char *oem,
diff --git a/arch/x86/kernel/paravirt.c b/arch/x86/kernel/paravirt.c
index 94da4d52d798..6b0bb73998dd 100644
--- a/arch/x86/kernel/paravirt.c
+++ b/arch/x86/kernel/paravirt.c
@@ -330,6 +330,7 @@ struct pv_cpu_ops pv_cpu_ops = {
 #endif
 	.wbinvd = native_wbinvd,
 	.read_msr = native_read_msr_safe,
+	.read_msr_amd = native_read_msr_amd_safe,
 	.write_msr = native_write_msr_safe,
 	.read_tsc = native_read_tsc,
 	.read_pmc = native_read_pmc,
@@ -373,8 +374,6 @@ struct pv_cpu_ops pv_cpu_ops = {
 
 struct pv_apic_ops pv_apic_ops = {
 #ifdef CONFIG_X86_LOCAL_APIC
-	.apic_write = native_apic_write,
-	.apic_read = native_apic_read,
 	.setup_boot_clock = setup_boot_APIC_clock,
 	.setup_secondary_clock = setup_secondary_APIC_clock,
 	.startup_ipi_hook = paravirt_nop,
@@ -471,7 +470,7 @@ struct pv_lock_ops pv_lock_ops = {
 	.spin_unlock = __ticket_spin_unlock,
 #endif
 };
-EXPORT_SYMBOL_GPL(pv_lock_ops);
+EXPORT_SYMBOL(pv_lock_ops);
 
 EXPORT_SYMBOL_GPL(pv_time_ops);
 EXPORT_SYMBOL    (pv_cpu_ops);
diff --git a/arch/x86/kernel/pci-calgary_64.c b/arch/x86/kernel/pci-calgary_64.c
index 151f2d171f7c..dcdac6c826e9 100644
--- a/arch/x86/kernel/pci-calgary_64.c
+++ b/arch/x86/kernel/pci-calgary_64.c
@@ -29,6 +29,7 @@
 #include <linux/mm.h>
 #include <linux/spinlock.h>
 #include <linux/string.h>
+#include <linux/crash_dump.h>
 #include <linux/dma-mapping.h>
 #include <linux/bitops.h>
 #include <linux/pci_ids.h>
@@ -36,6 +37,7 @@
 #include <linux/delay.h>
 #include <linux/scatterlist.h>
 #include <linux/iommu-helper.h>
+
 #include <asm/iommu.h>
 #include <asm/calgary.h>
 #include <asm/tce.h>
@@ -167,6 +169,8 @@ static void calgary_dump_error_regs(struct iommu_table *tbl);
 static void calioc2_handle_quirks(struct iommu_table *tbl, struct pci_dev *dev);
 static void calioc2_tce_cache_blast(struct iommu_table *tbl);
 static void calioc2_dump_error_regs(struct iommu_table *tbl);
+static void calgary_init_bitmap_from_tce_table(struct iommu_table *tbl);
+static void get_tce_space_from_tar(void);
 
 static struct cal_chipset_ops calgary_chip_ops = {
 	.handle_quirks = calgary_handle_quirks,
@@ -339,9 +343,8 @@ static void iommu_free(struct iommu_table *tbl, dma_addr_t dma_addr,
 	/* were we called with bad_dma_address? */
 	badend = bad_dma_address + (EMERGENCY_PAGES * PAGE_SIZE);
 	if (unlikely((dma_addr >= bad_dma_address) && (dma_addr < badend))) {
-		printk(KERN_ERR "Calgary: driver tried unmapping bad DMA "
+		WARN(1, KERN_ERR "Calgary: driver tried unmapping bad DMA "
 		       "address 0x%Lx\n", dma_addr);
-		WARN_ON(1);
 		return;
 	}
 
@@ -410,22 +413,6 @@ static void calgary_unmap_sg(struct device *dev,
 	}
 }
 
-static int calgary_nontranslate_map_sg(struct device* dev,
-	struct scatterlist *sg, int nelems, int direction)
-{
-	struct scatterlist *s;
-	int i;
-
-	for_each_sg(sg, s, nelems, i) {
-		struct page *p = sg_page(s);
-
-		BUG_ON(!p);
-		s->dma_address = virt_to_bus(sg_virt(s));
-		s->dma_length = s->length;
-	}
-	return nelems;
-}
-
 static int calgary_map_sg(struct device *dev, struct scatterlist *sg,
 	int nelems, int direction)
 {
@@ -436,9 +423,6 @@ static int calgary_map_sg(struct device *dev, struct scatterlist *sg,
 	unsigned long entry;
 	int i;
 
-	if (!translation_enabled(tbl))
-		return calgary_nontranslate_map_sg(dev, sg, nelems, direction);
-
 	for_each_sg(sg, s, nelems, i) {
 		BUG_ON(!sg_page(s));
 
@@ -474,7 +458,6 @@ error:
 static dma_addr_t calgary_map_single(struct device *dev, phys_addr_t paddr,
 	size_t size, int direction)
 {
-	dma_addr_t dma_handle = bad_dma_address;
 	void *vaddr = phys_to_virt(paddr);
 	unsigned long uaddr;
 	unsigned int npages;
@@ -483,12 +466,7 @@ static dma_addr_t calgary_map_single(struct device *dev, phys_addr_t paddr,
 	uaddr = (unsigned long)vaddr;
 	npages = num_dma_pages(uaddr, size);
 
-	if (translation_enabled(tbl))
-		dma_handle = iommu_alloc(dev, tbl, vaddr, npages, direction);
-	else
-		dma_handle = virt_to_bus(vaddr);
-
-	return dma_handle;
+	return iommu_alloc(dev, tbl, vaddr, npages, direction);
 }
 
 static void calgary_unmap_single(struct device *dev, dma_addr_t dma_handle,
@@ -497,9 +475,6 @@ static void calgary_unmap_single(struct device *dev, dma_addr_t dma_handle,
 	struct iommu_table *tbl = find_iommu_table(dev);
 	unsigned int npages;
 
-	if (!translation_enabled(tbl))
-		return;
-
 	npages = num_dma_pages(dma_handle, size);
 	iommu_free(tbl, dma_handle, npages);
 }
@@ -522,18 +497,12 @@ static void* calgary_alloc_coherent(struct device *dev, size_t size,
 		goto error;
 	memset(ret, 0, size);
 
-	if (translation_enabled(tbl)) {
-		/* set up tces to cover the allocated range */
-		mapping = iommu_alloc(dev, tbl, ret, npages, DMA_BIDIRECTIONAL);
-		if (mapping == bad_dma_address)
-			goto free;
-
-		*dma_handle = mapping;
-	} else /* non translated slot */
-		*dma_handle = virt_to_bus(ret);
-
+	/* set up tces to cover the allocated range */
+	mapping = iommu_alloc(dev, tbl, ret, npages, DMA_BIDIRECTIONAL);
+	if (mapping == bad_dma_address)
+		goto free;
+	*dma_handle = mapping;
 	return ret;
-
 free:
 	free_pages((unsigned long)ret, get_order(size));
 	ret = NULL;
@@ -541,7 +510,7 @@ error:
 	return ret;
 }
 
-static const struct dma_mapping_ops calgary_dma_ops = {
+static struct dma_mapping_ops calgary_dma_ops = {
 	.alloc_coherent = calgary_alloc_coherent,
 	.map_single = calgary_map_single,
 	.unmap_single = calgary_unmap_single,
@@ -830,7 +799,11 @@ static int __init calgary_setup_tar(struct pci_dev *dev, void __iomem *bbar)
 
 	tbl = pci_iommu(dev->bus);
 	tbl->it_base = (unsigned long)bus_info[dev->bus->number].tce_space;
-	tce_free(tbl, 0, tbl->it_size);
+
+	if (is_kdump_kernel())
+		calgary_init_bitmap_from_tce_table(tbl);
+	else
+		tce_free(tbl, 0, tbl->it_size);
 
 	if (is_calgary(dev->device))
 		tbl->chip_ops = &calgary_chip_ops;
@@ -1209,6 +1182,10 @@ static int __init calgary_init(void)
 	if (ret)
 		return ret;
 
+	/* Purely for kdump kernel case */
+	if (is_kdump_kernel())
+		get_tce_space_from_tar();
+
 	do {
 		dev = pci_get_device(PCI_VENDOR_ID_IBM, PCI_ANY_ID, dev);
 		if (!dev)
@@ -1230,6 +1207,16 @@ static int __init calgary_init(void)
 			goto error;
 	} while (1);
 
+	dev = NULL;
+	for_each_pci_dev(dev) {
+		struct iommu_table *tbl;
+
+		tbl = find_iommu_table(&dev->dev);
+
+		if (translation_enabled(tbl))
+			dev->dev.archdata.dma_ops = &calgary_dma_ops;
+	}
+
 	return ret;
 
 error:
@@ -1251,6 +1238,7 @@ error:
 		calgary_disable_translation(dev);
 		calgary_free_bus(dev);
 		pci_dev_put(dev); /* Undo calgary_init_one()'s pci_dev_get() */
+		dev->dev.archdata.dma_ops = NULL;
 	} while (1);
 
 	return ret;
@@ -1280,13 +1268,15 @@ static inline int __init determine_tce_table_size(u64 ram)
 static int __init build_detail_arrays(void)
 {
 	unsigned long ptr;
-	int i, scal_detail_size, rio_detail_size;
+	unsigned numnodes, i;
+	int scal_detail_size, rio_detail_size;
 
-	if (rio_table_hdr->num_scal_dev > MAX_NUMNODES){
+	numnodes = rio_table_hdr->num_scal_dev;
+	if (numnodes > MAX_NUMNODES){
 		printk(KERN_WARNING
 			"Calgary: MAX_NUMNODES too low! Defined as %d, "
 			"but system has %d nodes.\n",
-			MAX_NUMNODES, rio_table_hdr->num_scal_dev);
+			MAX_NUMNODES, numnodes);
 		return -ENODEV;
 	}
 
@@ -1307,8 +1297,7 @@ static int __init build_detail_arrays(void)
 	}
 
 	ptr = ((unsigned long)rio_table_hdr) + 3;
-	for (i = 0; i < rio_table_hdr->num_scal_dev;
-		    i++, ptr += scal_detail_size)
+	for (i = 0; i < numnodes; i++, ptr += scal_detail_size)
 		scal_devs[i] = (struct scal_detail *)ptr;
 
 	for (i = 0; i < rio_table_hdr->num_rio_dev;
@@ -1339,6 +1328,61 @@ static int __init calgary_bus_has_devices(int bus, unsigned short pci_dev)
 	return (val != 0xffffffff);
 }
 
+/*
+ * calgary_init_bitmap_from_tce_table():
+ * Funtion for kdump case. In the second/kdump kernel initialize
+ * the bitmap based on the tce table entries obtained from first kernel
+ */
+static void calgary_init_bitmap_from_tce_table(struct iommu_table *tbl)
+{
+	u64 *tp;
+	unsigned int index;
+	tp = ((u64 *)tbl->it_base);
+	for (index = 0 ; index < tbl->it_size; index++) {
+		if (*tp != 0x0)
+			set_bit(index, tbl->it_map);
+		tp++;
+	}
+}
+
+/*
+ * get_tce_space_from_tar():
+ * Function for kdump case. Get the tce tables from first kernel
+ * by reading the contents of the base adress register of calgary iommu
+ */
+static void __init get_tce_space_from_tar(void)
+{
+	int bus;
+	void __iomem *target;
+	unsigned long tce_space;
+
+	for (bus = 0; bus < MAX_PHB_BUS_NUM; bus++) {
+		struct calgary_bus_info *info = &bus_info[bus];
+		unsigned short pci_device;
+		u32 val;
+
+		val = read_pci_config(bus, 0, 0, 0);
+		pci_device = (val & 0xFFFF0000) >> 16;
+
+		if (!is_cal_pci_dev(pci_device))
+			continue;
+		if (info->translation_disabled)
+			continue;
+
+		if (calgary_bus_has_devices(bus, pci_device) ||
+						translate_empty_slots) {
+			target = calgary_reg(bus_info[bus].bbar,
+						tar_offset(bus));
+			tce_space = be64_to_cpu(readq(target));
+			tce_space = tce_space & TAR_SW_BITS;
+
+			tce_space = tce_space & (~specified_table_size);
+			info->tce_space = (u64 *)__va(tce_space);
+		}
+	}
+	return;
+}
+
 void __init detect_calgary(void)
 {
 	int bus;
@@ -1394,7 +1438,8 @@ void __init detect_calgary(void)
 		return;
 	}
 
-	specified_table_size = determine_tce_table_size(max_pfn * PAGE_SIZE);
+	specified_table_size = determine_tce_table_size((is_kdump_kernel() ?
+					saved_max_pfn : max_pfn) * PAGE_SIZE);
 
 	for (bus = 0; bus < MAX_PHB_BUS_NUM; bus++) {
 		struct calgary_bus_info *info = &bus_info[bus];
@@ -1412,10 +1457,16 @@ void __init detect_calgary(void)
 
 		if (calgary_bus_has_devices(bus, pci_device) ||
 		    translate_empty_slots) {
-			tbl = alloc_tce_table();
-			if (!tbl)
-				goto cleanup;
-			info->tce_space = tbl;
+			/*
+			 * If it is kdump kernel, find and use tce tables
+			 * from first kernel, else allocate tce tables here
+			 */
+			if (!is_kdump_kernel()) {
+				tbl = alloc_tce_table();
+				if (!tbl)
+					goto cleanup;
+				info->tce_space = tbl;
+			}
 			calgary_found = 1;
 		}
 	}
@@ -1430,6 +1481,10 @@ void __init detect_calgary(void)
 		printk(KERN_INFO "PCI-DMA: Calgary TCE table spec is %d, "
 		       "CONFIG_IOMMU_DEBUG is %s.\n", specified_table_size,
 		       debugging ? "enabled" : "disabled");
+
+		/* swiotlb for devices that aren't behind the Calgary. */
+		if (max_pfn > MAX_DMA32_PFN)
+			swiotlb = 1;
 	}
 	return;
 
@@ -1446,7 +1501,7 @@ int __init calgary_iommu_init(void)
 {
 	int ret;
 
-	if (no_iommu || swiotlb)
+	if (no_iommu || (swiotlb && !calgary_detected))
 		return -ENODEV;
 
 	if (!calgary_detected)
@@ -1459,15 +1514,14 @@ int __init calgary_iommu_init(void)
 	if (ret) {
 		printk(KERN_ERR "PCI-DMA: Calgary init failed %d, "
 		       "falling back to no_iommu\n", ret);
-		if (max_pfn > MAX_DMA32_PFN)
-			printk(KERN_ERR "WARNING more than 4GB of memory, "
-					"32bit PCI may malfunction.\n");
 		return ret;
 	}
 
 	force_iommu = 1;
 	bad_dma_address = 0x0;
-	dma_ops = &calgary_dma_ops;
+	/* dma_ops is set to swiotlb or nommu */
+	if (!dma_ops)
+		dma_ops = &nommu_dma_ops;
 
 	return 0;
 }
diff --git a/arch/x86/kernel/pci-dma.c b/arch/x86/kernel/pci-dma.c
index cbecb05551bb..87d4d6964ec2 100644
--- a/arch/x86/kernel/pci-dma.c
+++ b/arch/x86/kernel/pci-dma.c
@@ -11,7 +11,7 @@
 
 static int forbid_dac __read_mostly;
 
-const struct dma_mapping_ops *dma_ops;
+struct dma_mapping_ops *dma_ops;
 EXPORT_SYMBOL(dma_ops);
 
 static int iommu_sac_force __read_mostly;
@@ -123,6 +123,14 @@ void __init pci_iommu_alloc(void)
 
 	pci_swiotlb_init();
 }
+
+unsigned long iommu_num_pages(unsigned long addr, unsigned long len)
+{
+	unsigned long size = roundup((addr & ~PAGE_MASK) + len, PAGE_SIZE);
+
+	return size >> PAGE_SHIFT;
+}
+EXPORT_SYMBOL(iommu_num_pages);
 #endif
 
 /*
@@ -192,126 +200,10 @@ static __init int iommu_setup(char *p)
 }
 early_param("iommu", iommu_setup);
 
-#ifdef CONFIG_X86_32
-int dma_declare_coherent_memory(struct device *dev, dma_addr_t bus_addr,
-				dma_addr_t device_addr, size_t size, int flags)
-{
-	void __iomem *mem_base = NULL;
-	int pages = size >> PAGE_SHIFT;
-	int bitmap_size = BITS_TO_LONGS(pages) * sizeof(long);
-
-	if ((flags & (DMA_MEMORY_MAP | DMA_MEMORY_IO)) == 0)
-		goto out;
-	if (!size)
-		goto out;
-	if (dev->dma_mem)
-		goto out;
-
-	/* FIXME: this routine just ignores DMA_MEMORY_INCLUDES_CHILDREN */
-
-	mem_base = ioremap(bus_addr, size);
-	if (!mem_base)
-		goto out;
-
-	dev->dma_mem = kzalloc(sizeof(struct dma_coherent_mem), GFP_KERNEL);
-	if (!dev->dma_mem)
-		goto out;
-	dev->dma_mem->bitmap = kzalloc(bitmap_size, GFP_KERNEL);
-	if (!dev->dma_mem->bitmap)
-		goto free1_out;
-
-	dev->dma_mem->virt_base = mem_base;
-	dev->dma_mem->device_base = device_addr;
-	dev->dma_mem->size = pages;
-	dev->dma_mem->flags = flags;
-
-	if (flags & DMA_MEMORY_MAP)
-		return DMA_MEMORY_MAP;
-
-	return DMA_MEMORY_IO;
-
- free1_out:
-	kfree(dev->dma_mem);
- out:
-	if (mem_base)
-		iounmap(mem_base);
-	return 0;
-}
-EXPORT_SYMBOL(dma_declare_coherent_memory);
-
-void dma_release_declared_memory(struct device *dev)
-{
-	struct dma_coherent_mem *mem = dev->dma_mem;
-
-	if (!mem)
-		return;
-	dev->dma_mem = NULL;
-	iounmap(mem->virt_base);
-	kfree(mem->bitmap);
-	kfree(mem);
-}
-EXPORT_SYMBOL(dma_release_declared_memory);
-
-void *dma_mark_declared_memory_occupied(struct device *dev,
-					dma_addr_t device_addr, size_t size)
-{
-	struct dma_coherent_mem *mem = dev->dma_mem;
-	int pos, err;
-	int pages = (size + (device_addr & ~PAGE_MASK) + PAGE_SIZE - 1);
-
-	pages >>= PAGE_SHIFT;
-
-	if (!mem)
-		return ERR_PTR(-EINVAL);
-
-	pos = (device_addr - mem->device_base) >> PAGE_SHIFT;
-	err = bitmap_allocate_region(mem->bitmap, pos, get_order(pages));
-	if (err != 0)
-		return ERR_PTR(err);
-	return mem->virt_base + (pos << PAGE_SHIFT);
-}
-EXPORT_SYMBOL(dma_mark_declared_memory_occupied);
-
-static int dma_alloc_from_coherent_mem(struct device *dev, ssize_t size,
-				       dma_addr_t *dma_handle, void **ret)
-{
-	struct dma_coherent_mem *mem = dev ? dev->dma_mem : NULL;
-	int order = get_order(size);
-
-	if (mem) {
-		int page = bitmap_find_free_region(mem->bitmap, mem->size,
-						     order);
-		if (page >= 0) {
-			*dma_handle = mem->device_base + (page << PAGE_SHIFT);
-			*ret = mem->virt_base + (page << PAGE_SHIFT);
-			memset(*ret, 0, size);
-		}
-		if (mem->flags & DMA_MEMORY_EXCLUSIVE)
-			*ret = NULL;
-	}
-	return (mem != NULL);
-}
-
-static int dma_release_coherent(struct device *dev, int order, void *vaddr)
-{
-	struct dma_coherent_mem *mem = dev ? dev->dma_mem : NULL;
-
-	if (mem && vaddr >= mem->virt_base && vaddr <
-		   (mem->virt_base + (mem->size << PAGE_SHIFT))) {
-		int page = (vaddr - mem->virt_base) >> PAGE_SHIFT;
-
-		bitmap_release_region(mem->bitmap, page, order);
-		return 1;
-	}
-	return 0;
-}
-#else
-#define dma_alloc_from_coherent_mem(dev, size, handle, ret) (0)
-#define dma_release_coherent(dev, order, vaddr) (0)
-#endif /* CONFIG_X86_32 */
-
 int dma_supported(struct device *dev, u64 mask)
 {
+	struct dma_mapping_ops *ops = get_dma_ops(dev);
+
 #ifdef CONFIG_PCI
 	if (mask > 0xffffffff && forbid_dac > 0) {
 		dev_info(dev, "PCI: Disallowing DAC for device\n");
@@ -319,8 +211,8 @@ int dma_supported(struct device *dev, u64 mask)
 	}
 #endif
 
-	if (dma_ops->dma_supported)
-		return dma_ops->dma_supported(dev, mask);
+	if (ops->dma_supported)
+		return ops->dma_supported(dev, mask);
 
 	/* Copied from i386. Doesn't make much sense, because it will
 	   only work for pci_alloc_coherent.
@@ -367,6 +259,7 @@ void *
 dma_alloc_coherent(struct device *dev, size_t size, dma_addr_t *dma_handle,
 		   gfp_t gfp)
 {
+	struct dma_mapping_ops *ops = get_dma_ops(dev);
 	void *memory = NULL;
 	struct page *page;
 	unsigned long dma_mask = 0;
@@ -376,7 +269,7 @@ dma_alloc_coherent(struct device *dev, size_t size, dma_addr_t *dma_handle,
 	/* ignore region specifiers */
 	gfp &= ~(__GFP_DMA | __GFP_HIGHMEM | __GFP_DMA32);
 
-	if (dma_alloc_from_coherent_mem(dev, size, dma_handle, &memory))
+	if (dma_alloc_from_coherent(dev, size, dma_handle, &memory))
 		return memory;
 
 	if (!dev) {
@@ -435,8 +328,8 @@ dma_alloc_coherent(struct device *dev, size_t size, dma_addr_t *dma_handle,
 			/* Let low level make its own zone decisions */
 			gfp &= ~(GFP_DMA32|GFP_DMA);
 
-			if (dma_ops->alloc_coherent)
-				return dma_ops->alloc_coherent(dev, size,
+			if (ops->alloc_coherent)
+				return ops->alloc_coherent(dev, size,
 							   dma_handle, gfp);
 			return NULL;
 		}
@@ -448,14 +341,14 @@ dma_alloc_coherent(struct device *dev, size_t size, dma_addr_t *dma_handle,
 		}
 	}
 
-	if (dma_ops->alloc_coherent) {
+	if (ops->alloc_coherent) {
 		free_pages((unsigned long)memory, get_order(size));
 		gfp &= ~(GFP_DMA|GFP_DMA32);
-		return dma_ops->alloc_coherent(dev, size, dma_handle, gfp);
+		return ops->alloc_coherent(dev, size, dma_handle, gfp);
 	}
 
-	if (dma_ops->map_simple) {
-		*dma_handle = dma_ops->map_simple(dev, virt_to_phys(memory),
+	if (ops->map_simple) {
+		*dma_handle = ops->map_simple(dev, virt_to_phys(memory),
 					      size,
 					      PCI_DMA_BIDIRECTIONAL);
 		if (*dma_handle != bad_dma_address)
@@ -477,12 +370,14 @@ EXPORT_SYMBOL(dma_alloc_coherent);
 void dma_free_coherent(struct device *dev, size_t size,
 			 void *vaddr, dma_addr_t bus)
 {
+	struct dma_mapping_ops *ops = get_dma_ops(dev);
+
 	int order = get_order(size);
 	WARN_ON(irqs_disabled());	/* for portability */
-	if (dma_release_coherent(dev, order, vaddr))
+	if (dma_release_from_coherent(dev, order, vaddr))
 		return;
-	if (dma_ops->unmap_single)
-		dma_ops->unmap_single(dev, bus, size, 0);
+	if (ops->unmap_single)
+		ops->unmap_single(dev, bus, size, 0);
 	free_pages((unsigned long)vaddr, order);
 }
 EXPORT_SYMBOL(dma_free_coherent);
diff --git a/arch/x86/kernel/pci-gart_64.c b/arch/x86/kernel/pci-gart_64.c
index df5f142657d2..49285f8fd4d5 100644
--- a/arch/x86/kernel/pci-gart_64.c
+++ b/arch/x86/kernel/pci-gart_64.c
@@ -67,9 +67,6 @@ static u32 gart_unmapped_entry;
 	(((x) & 0xfffff000) | (((x) >> 32) << 4) | GPTE_VALID | GPTE_COHERENT)
 #define GPTE_DECODE(x) (((x) & 0xfffff000) | (((u64)(x) & 0xff0) << 28))
 
-#define to_pages(addr, size) \
-	(round_up(((addr) & ~PAGE_MASK) + (size), PAGE_SIZE) >> PAGE_SHIFT)
-
 #define EMERGENCY_PAGES 32 /* = 128KB */
 
 #ifdef CONFIG_AGP
@@ -241,7 +238,7 @@ nonforced_iommu(struct device *dev, unsigned long addr, size_t size)
 static dma_addr_t dma_map_area(struct device *dev, dma_addr_t phys_mem,
 				size_t size, int dir)
 {
-	unsigned long npages = to_pages(phys_mem, size);
+	unsigned long npages = iommu_num_pages(phys_mem, size);
 	unsigned long iommu_page = alloc_iommu(dev, npages);
 	int i;
 
@@ -304,7 +301,7 @@ static void gart_unmap_single(struct device *dev, dma_addr_t dma_addr,
 		return;
 
 	iommu_page = (dma_addr - iommu_bus_base)>>PAGE_SHIFT;
-	npages = to_pages(dma_addr, size);
+	npages = iommu_num_pages(dma_addr, size);
 	for (i = 0; i < npages; i++) {
 		iommu_gatt_base[iommu_page + i] = gart_unmapped_entry;
 		CLEAR_LEAK(iommu_page + i);
@@ -387,7 +384,7 @@ static int __dma_map_cont(struct device *dev, struct scatterlist *start,
 		}
 
 		addr = phys_addr;
-		pages = to_pages(s->offset, s->length);
+		pages = iommu_num_pages(s->offset, s->length);
 		while (pages--) {
 			iommu_gatt_base[iommu_page] = GPTE_ENCODE(addr);
 			SET_LEAK(iommu_page);
@@ -470,7 +467,7 @@ gart_map_sg(struct device *dev, struct scatterlist *sg, int nents, int dir)
 
 		seg_size += s->length;
 		need = nextneed;
-		pages += to_pages(s->offset, s->length);
+		pages += iommu_num_pages(s->offset, s->length);
 		ps = s;
 	}
 	if (dma_map_cont(dev, start_sg, i - start, sgmap, pages, need) < 0)
@@ -692,8 +689,7 @@ static __init int init_k8_gatt(struct agp_kern_info *info)
 
 extern int agp_amd64_init(void);
 
-static const struct dma_mapping_ops gart_dma_ops = {
-	.mapping_error			= NULL,
+static struct dma_mapping_ops gart_dma_ops = {
 	.map_single			= gart_map_single,
 	.map_simple			= gart_map_simple,
 	.unmap_single			= gart_unmap_single,
diff --git a/arch/x86/kernel/pci-nommu.c b/arch/x86/kernel/pci-nommu.c
index 792b9179eff3..3f91f71cdc3e 100644
--- a/arch/x86/kernel/pci-nommu.c
+++ b/arch/x86/kernel/pci-nommu.c
@@ -72,21 +72,9 @@ static int nommu_map_sg(struct device *hwdev, struct scatterlist *sg,
 	return nents;
 }
 
-/* Make sure we keep the same behaviour */
-static int nommu_mapping_error(dma_addr_t dma_addr)
-{
-#ifdef CONFIG_X86_32
-	return 0;
-#else
-	return (dma_addr == bad_dma_address);
-#endif
-}
-
-
-const struct dma_mapping_ops nommu_dma_ops = {
+struct dma_mapping_ops nommu_dma_ops = {
 	.map_single = nommu_map_single,
 	.map_sg = nommu_map_sg,
-	.mapping_error = nommu_mapping_error,
 	.is_phys = 1,
 };
 
diff --git a/arch/x86/kernel/pci-swiotlb_64.c b/arch/x86/kernel/pci-swiotlb_64.c
index 20df839b9c20..c4ce0332759e 100644
--- a/arch/x86/kernel/pci-swiotlb_64.c
+++ b/arch/x86/kernel/pci-swiotlb_64.c
@@ -18,7 +18,7 @@ swiotlb_map_single_phys(struct device *hwdev, phys_addr_t paddr, size_t size,
 	return swiotlb_map_single(hwdev, phys_to_virt(paddr), size, direction);
 }
 
-const struct dma_mapping_ops swiotlb_dma_ops = {
+struct dma_mapping_ops swiotlb_dma_ops = {
 	.mapping_error = swiotlb_dma_mapping_error,
 	.alloc_coherent = swiotlb_alloc_coherent,
 	.free_coherent = swiotlb_free_coherent,
diff --git a/arch/x86/kernel/process.c b/arch/x86/kernel/process.c
index 7fc4d5b0a6a0..9f94bb1c8117 100644
--- a/arch/x86/kernel/process.c
+++ b/arch/x86/kernel/process.c
@@ -15,7 +15,6 @@ unsigned long idle_nomwait;
 EXPORT_SYMBOL(idle_nomwait);
 
 struct kmem_cache *task_xstate_cachep;
-static int force_mwait __cpuinitdata;
 
 int arch_dup_task_struct(struct task_struct *dst, struct task_struct *src)
 {
diff --git a/arch/x86/kernel/process_32.c b/arch/x86/kernel/process_32.c
index 68f4ae2ac99a..1962d27c6b82 100644
--- a/arch/x86/kernel/process_32.c
+++ b/arch/x86/kernel/process_32.c
@@ -55,6 +55,8 @@
 #include <asm/tlbflush.h>
 #include <asm/cpu.h>
 #include <asm/kdebug.h>
+#include <asm/syscalls.h>
+#include <asm/smp.h>
 
 asmlinkage void ret_from_fork(void) __asm__("ret_from_fork");
 
@@ -95,7 +97,6 @@ static inline void play_dead(void)
 {
 	/* This must be done before dead CPU ack */
 	cpu_exit_clear();
-	wbinvd();
 	mb();
 	/* Ack it */
 	__get_cpu_var(cpu_state) = CPU_DEAD;
@@ -104,8 +105,8 @@ static inline void play_dead(void)
 	 * With physical CPU hotplug, we should halt the cpu
 	 */
 	local_irq_disable();
-	while (1)
-		halt();
+	/* mask all interrupts, flush any and all caches, and halt */
+	wbinvd_halt();
 }
 #else
 static inline void play_dead(void)
diff --git a/arch/x86/kernel/process_64.c b/arch/x86/kernel/process_64.c
index 91ffce47af8e..08a9df08adba 100644
--- a/arch/x86/kernel/process_64.c
+++ b/arch/x86/kernel/process_64.c
@@ -51,6 +51,7 @@
 #include <asm/proto.h>
 #include <asm/ia32.h>
 #include <asm/idle.h>
+#include <asm/syscalls.h>
 
 asmlinkage extern void ret_from_fork(void);
 
@@ -93,14 +94,13 @@ DECLARE_PER_CPU(int, cpu_state);
 static inline void play_dead(void)
 {
 	idle_task_exit();
-	wbinvd();
 	mb();
 	/* Ack it */
 	__get_cpu_var(cpu_state) = CPU_DEAD;
 
 	local_irq_disable();
-	while (1)
-		halt();
+	/* mask all interrupts, flush any and all caches, and halt */
+	wbinvd_halt();
 }
 #else
 static inline void play_dead(void)
diff --git a/arch/x86/kernel/ptrace.c b/arch/x86/kernel/ptrace.c
index ba19bb49bd09..58ce4b50211b 100644
--- a/arch/x86/kernel/ptrace.c
+++ b/arch/x86/kernel/ptrace.c
@@ -69,7 +69,7 @@ static inline bool invalid_selector(u16 value)
 
 #define FLAG_MASK		FLAG_MASK_32
 
-static long *pt_regs_access(struct pt_regs *regs, unsigned long regno)
+static unsigned long *pt_regs_access(struct pt_regs *regs, unsigned long regno)
 {
 	BUILD_BUG_ON(offsetof(struct pt_regs, bx) != 0);
 	regno >>= 2;
diff --git a/arch/x86/kernel/reboot.c b/arch/x86/kernel/reboot.c
index 06a9f643817e..724adfc63cb9 100644
--- a/arch/x86/kernel/reboot.c
+++ b/arch/x86/kernel/reboot.c
@@ -414,25 +414,20 @@ void native_machine_shutdown(void)
 
 	/* The boot cpu is always logical cpu 0 */
 	int reboot_cpu_id = 0;
-	cpumask_of_cpu_ptr(newmask, reboot_cpu_id);
 
 #ifdef CONFIG_X86_32
 	/* See if there has been given a command line override */
 	if ((reboot_cpu != -1) && (reboot_cpu < NR_CPUS) &&
-		cpu_online(reboot_cpu)) {
+		cpu_online(reboot_cpu))
 		reboot_cpu_id = reboot_cpu;
-		cpumask_of_cpu_ptr_next(newmask, reboot_cpu_id);
-	}
 #endif
 
 	/* Make certain the cpu I'm about to reboot on is online */
-	if (!cpu_online(reboot_cpu_id)) {
+	if (!cpu_online(reboot_cpu_id))
 		reboot_cpu_id = smp_processor_id();
-		cpumask_of_cpu_ptr_next(newmask, reboot_cpu_id);
-	}
 
 	/* Make certain I only run on the appropriate processor */
-	set_cpus_allowed_ptr(current, newmask);
+	set_cpus_allowed_ptr(current, &cpumask_of_cpu(reboot_cpu_id));
 
 	/* O.K Now that I'm on the appropriate processor,
 	 * stop all of the others.
diff --git a/arch/x86/kernel/relocate_kernel_32.S b/arch/x86/kernel/relocate_kernel_32.S
index c30fe25d470d..6f50664b2ba5 100644
--- a/arch/x86/kernel/relocate_kernel_32.S
+++ b/arch/x86/kernel/relocate_kernel_32.S
@@ -20,11 +20,45 @@
 #define PAGE_ATTR (_PAGE_PRESENT | _PAGE_RW | _PAGE_ACCESSED | _PAGE_DIRTY)
 #define PAE_PGD_ATTR (_PAGE_PRESENT)
 
+/* control_page + KEXEC_CONTROL_CODE_MAX_SIZE
+ * ~ control_page + PAGE_SIZE are used as data storage and stack for
+ * jumping back
+ */
+#define DATA(offset)		(KEXEC_CONTROL_CODE_MAX_SIZE+(offset))
+
+/* Minimal CPU state */
+#define ESP			DATA(0x0)
+#define CR0			DATA(0x4)
+#define CR3			DATA(0x8)
+#define CR4			DATA(0xc)
+
+/* other data */
+#define CP_VA_CONTROL_PAGE	DATA(0x10)
+#define CP_PA_PGD		DATA(0x14)
+#define CP_PA_SWAP_PAGE		DATA(0x18)
+#define CP_PA_BACKUP_PAGES_MAP	DATA(0x1c)
+
 	.text
 	.align PAGE_SIZE
 	.globl relocate_kernel
 relocate_kernel:
-	movl	8(%esp), %ebp /* list of pages */
+	/* Save the CPU context, used for jumping back */
+
+	pushl	%ebx
+	pushl	%esi
+	pushl	%edi
+	pushl	%ebp
+	pushf
+
+	movl	20+8(%esp), %ebp /* list of pages */
+	movl	PTR(VA_CONTROL_PAGE)(%ebp), %edi
+	movl	%esp, ESP(%edi)
+	movl	%cr0, %eax
+	movl	%eax, CR0(%edi)
+	movl	%cr3, %eax
+	movl	%eax, CR3(%edi)
+	movl	%cr4, %eax
+	movl	%eax, CR4(%edi)
 
 #ifdef CONFIG_X86_PAE
 	/* map the control page at its virtual address */
@@ -138,15 +172,25 @@ relocate_kernel:
 
 relocate_new_kernel:
 	/* read the arguments and say goodbye to the stack */
-	movl  4(%esp), %ebx /* page_list */
-	movl  8(%esp), %ebp /* list of pages */
-	movl  12(%esp), %edx /* start address */
-	movl  16(%esp), %ecx /* cpu_has_pae */
+	movl  20+4(%esp), %ebx /* page_list */
+	movl  20+8(%esp), %ebp /* list of pages */
+	movl  20+12(%esp), %edx /* start address */
+	movl  20+16(%esp), %ecx /* cpu_has_pae */
+	movl  20+20(%esp), %esi /* preserve_context */
 
 	/* zero out flags, and disable interrupts */
 	pushl $0
 	popfl
 
+	/* save some information for jumping back */
+	movl	PTR(VA_CONTROL_PAGE)(%ebp), %edi
+	movl	%edi, CP_VA_CONTROL_PAGE(%edi)
+	movl	PTR(PA_PGD)(%ebp), %eax
+	movl	%eax, CP_PA_PGD(%edi)
+	movl	PTR(PA_SWAP_PAGE)(%ebp), %eax
+	movl	%eax, CP_PA_SWAP_PAGE(%edi)
+	movl	%ebx, CP_PA_BACKUP_PAGES_MAP(%edi)
+
 	/* get physical address of control page now */
 	/* this is impossible after page table switch */
 	movl	PTR(PA_CONTROL_PAGE)(%ebp), %edi
@@ -197,8 +241,90 @@ identity_mapped:
 	xorl	%eax, %eax
 	movl	%eax, %cr3
 
+	movl	CP_PA_SWAP_PAGE(%edi), %eax
+	pushl	%eax
+	pushl	%ebx
+	call	swap_pages
+	addl	$8, %esp
+
+	/* To be certain of avoiding problems with self-modifying code
+	 * I need to execute a serializing instruction here.
+	 * So I flush the TLB, it's handy, and not processor dependent.
+	 */
+	xorl	%eax, %eax
+	movl	%eax, %cr3
+
+	/* set all of the registers to known values */
+	/* leave %esp alone */
+
+	testl	%esi, %esi
+	jnz 1f
+	xorl	%edi, %edi
+	xorl	%eax, %eax
+	xorl	%ebx, %ebx
+	xorl    %ecx, %ecx
+	xorl    %edx, %edx
+	xorl    %esi, %esi
+	xorl    %ebp, %ebp
+	ret
+1:
+	popl	%edx
+	movl	CP_PA_SWAP_PAGE(%edi), %esp
+	addl	$PAGE_SIZE, %esp
+2:
+	call	*%edx
+
+	/* get the re-entry point of the peer system */
+	movl	0(%esp), %ebp
+	call	1f
+1:
+	popl	%ebx
+	subl	$(1b - relocate_kernel), %ebx
+	movl	CP_VA_CONTROL_PAGE(%ebx), %edi
+	lea	PAGE_SIZE(%ebx), %esp
+	movl	CP_PA_SWAP_PAGE(%ebx), %eax
+	movl	CP_PA_BACKUP_PAGES_MAP(%ebx), %edx
+	pushl	%eax
+	pushl	%edx
+	call	swap_pages
+	addl	$8, %esp
+	movl	CP_PA_PGD(%ebx), %eax
+	movl	%eax, %cr3
+	movl	%cr0, %eax
+	orl	$(1<<31), %eax
+	movl	%eax, %cr0
+	lea	PAGE_SIZE(%edi), %esp
+	movl	%edi, %eax
+	addl	$(virtual_mapped - relocate_kernel), %eax
+	pushl	%eax
+	ret
+
+virtual_mapped:
+	movl	CR4(%edi), %eax
+	movl	%eax, %cr4
+	movl	CR3(%edi), %eax
+	movl	%eax, %cr3
+	movl	CR0(%edi), %eax
+	movl	%eax, %cr0
+	movl	ESP(%edi), %esp
+	movl	%ebp, %eax
+
+	popf
+	popl	%ebp
+	popl	%edi
+	popl	%esi
+	popl	%ebx
+	ret
+
 	/* Do the copies */
-	movl	%ebx, %ecx
+swap_pages:
+	movl	8(%esp), %edx
+	movl	4(%esp), %ecx
+	pushl	%ebp
+	pushl	%ebx
+	pushl	%edi
+	pushl	%esi
+	movl	%ecx, %ebx
 	jmp	1f
 
 0:	/* top, read another word from the indirection page */
@@ -226,27 +352,31 @@ identity_mapped:
 	movl    %ecx,   %esi /* For every source page do a copy */
 	andl    $0xfffff000, %esi
 
+	movl	%edi, %eax
+	movl	%esi, %ebp
+
+	movl	%edx, %edi
 	movl    $1024, %ecx
 	rep ; movsl
-	jmp     0b
-
-3:
 
-	/* To be certain of avoiding problems with self-modifying code
-	 * I need to execute a serializing instruction here.
-	 * So I flush the TLB, it's handy, and not processor dependent.
-	 */
-	xorl	%eax, %eax
-	movl	%eax, %cr3
+	movl	%ebp, %edi
+	movl	%eax, %esi
+	movl	$1024, %ecx
+	rep ; movsl
 
-	/* set all of the registers to known values */
-	/* leave %esp alone */
+	movl	%eax, %edi
+	movl	%edx, %esi
+	movl	$1024, %ecx
+	rep ; movsl
 
-	xorl	%eax, %eax
-	xorl	%ebx, %ebx
-	xorl    %ecx, %ecx
-	xorl    %edx, %edx
-	xorl    %esi, %esi
-	xorl    %edi, %edi
-	xorl    %ebp, %ebp
+	lea	PAGE_SIZE(%ebp), %esi
+	jmp     0b
+3:
+	popl	%esi
+	popl	%edi
+	popl	%ebx
+	popl	%ebp
 	ret
+
+	.globl kexec_control_code_size
+.set kexec_control_code_size, . - relocate_kernel
diff --git a/arch/x86/kernel/setup.c b/arch/x86/kernel/setup.c
index b520dae02bf4..673f12cf6eb0 100644
--- a/arch/x86/kernel/setup.c
+++ b/arch/x86/kernel/setup.c
@@ -445,7 +445,7 @@ static void __init reserve_early_setup_data(void)
  * @size: Size of the crashkernel memory to reserve.
  * Returns the base address on success, and -1ULL on failure.
  */
-unsigned long long find_and_reserve_crashkernel(unsigned long long size)
+unsigned long long __init find_and_reserve_crashkernel(unsigned long long size)
 {
 	const unsigned long long alignment = 16<<20; 	/* 16M */
 	unsigned long long start = 0LL;
@@ -670,6 +670,14 @@ void __init setup_arch(char **cmdline_p)
 
 	parse_early_param();
 
+#if defined(CONFIG_VMI) && defined(CONFIG_X86_32)
+	/*
+	 * Must be before kernel pagetables are setup
+	 * or fixmap area is touched.
+	 */
+	vmi_init();
+#endif
+
 	/* after early param, so could get panic from serial */
 	reserve_early_setup_data();
 
@@ -731,6 +739,8 @@ void __init setup_arch(char **cmdline_p)
 	num_physpages = max_pfn;
 
 	check_efer();
+ 	if (cpu_has_x2apic)
+ 		check_x2apic();
 
 	/* How many end-of-memory variables you have, grandma! */
 	/* need this before calling reserve_initrd */
@@ -788,10 +798,6 @@ void __init setup_arch(char **cmdline_p)
 
 	initmem_init(0, max_pfn);
 
-#ifdef CONFIG_X86_64
-	dma32_reserve_bootmem();
-#endif
-
 #ifdef CONFIG_ACPI_SLEEP
 	/*
 	 * Reserve low memory region for sleep support.
@@ -806,20 +812,21 @@ void __init setup_arch(char **cmdline_p)
 #endif
 	reserve_crashkernel();
 
+#ifdef CONFIG_X86_64
+	/*
+	 * dma32_reserve_bootmem() allocates bootmem which may conflict
+	 * with the crashkernel command line, so do that after
+	 * reserve_crashkernel()
+	 */
+	dma32_reserve_bootmem();
+#endif
+
 	reserve_ibft_region();
 
 #ifdef CONFIG_KVM_CLOCK
 	kvmclock_init();
 #endif
 
-#if defined(CONFIG_VMI) && defined(CONFIG_X86_32)
-	/*
-	 * Must be after max_low_pfn is determined, and before kernel
-	 * pagetables are setup.
-	 */
-	vmi_init();
-#endif
-
 	paravirt_pagetable_setup_start(swapper_pg_dir);
 	paging_init();
 	paravirt_pagetable_setup_done(swapper_pg_dir);
@@ -856,12 +863,6 @@ void __init setup_arch(char **cmdline_p)
 	init_apic_mappings();
 	ioapic_init_mappings();
 
-#if defined(CONFIG_SMP) && defined(CONFIG_X86_PC) && defined(CONFIG_X86_32)
-	if (def_to_bigsmp)
-		printk(KERN_WARNING "More than 8 CPUs detected and "
-			"CONFIG_X86_PC cannot handle it.\nUse "
-			"CONFIG_X86_GENERICARCH or CONFIG_X86_BIGSMP.\n");
-#endif
 	kvm_guest_init();
 
 	e820_reserve_resources();
diff --git a/arch/x86/kernel/setup_percpu.c b/arch/x86/kernel/setup_percpu.c
index f7745f94c006..0e67f72d9316 100644
--- a/arch/x86/kernel/setup_percpu.c
+++ b/arch/x86/kernel/setup_percpu.c
@@ -80,24 +80,6 @@ static void __init setup_per_cpu_maps(void)
 #endif
 }
 
-#ifdef CONFIG_HAVE_CPUMASK_OF_CPU_MAP
-cpumask_t *cpumask_of_cpu_map __read_mostly;
-EXPORT_SYMBOL(cpumask_of_cpu_map);
-
-/* requires nr_cpu_ids to be initialized */
-static void __init setup_cpumask_of_cpu(void)
-{
-	int i;
-
-	/* alloc_bootmem zeroes memory */
-	cpumask_of_cpu_map = alloc_bootmem_low(sizeof(cpumask_t) * nr_cpu_ids);
-	for (i = 0; i < nr_cpu_ids; i++)
-		cpu_set(i, cpumask_of_cpu_map[i]);
-}
-#else
-static inline void setup_cpumask_of_cpu(void) { }
-#endif
-
 #ifdef CONFIG_X86_32
 /*
  * Great future not-so-futuristic plan: make i386 and x86_64 do it
@@ -180,9 +162,16 @@ void __init setup_per_cpu_areas(void)
 			printk(KERN_INFO
 			       "cpu %d has no node %d or node-local memory\n",
 				cpu, node);
+			if (ptr)
+				printk(KERN_DEBUG "per cpu data for cpu%d at %016lx\n",
+					 cpu, __pa(ptr));
 		}
-		else
+		else {
 			ptr = alloc_bootmem_pages_node(NODE_DATA(node), size);
+			if (ptr)
+				printk(KERN_DEBUG "per cpu data for cpu%d on node%d at %016lx\n",
+					 cpu, node, __pa(ptr));
+		}
 #endif
 		per_cpu_offset(cpu) = ptr - __per_cpu_start;
 		memcpy(ptr, __per_cpu_start, __per_cpu_end - __per_cpu_start);
@@ -197,9 +186,6 @@ void __init setup_per_cpu_areas(void)
 
 	/* Setup node to cpumask map */
 	setup_node_to_cpumask_map();
-
-	/* Setup cpumask_of_cpu map */
-	setup_cpumask_of_cpu();
 }
 
 #endif
diff --git a/arch/x86/kernel/sigframe.h b/arch/x86/kernel/sigframe.h
index 72bbb519d2dc..6dd7e2b70a4b 100644
--- a/arch/x86/kernel/sigframe.h
+++ b/arch/x86/kernel/sigframe.h
@@ -3,9 +3,18 @@ struct sigframe {
 	char __user *pretcode;
 	int sig;
 	struct sigcontext sc;
-	struct _fpstate fpstate;
+	/*
+	 * fpstate is unused. fpstate is moved/allocated after
+	 * retcode[] below. This movement allows to have the FP state and the
+	 * future state extensions (xsave) stay together.
+	 * And at the same time retaining the unused fpstate, prevents changing
+	 * the offset of extramask[] in the sigframe and thus prevent any
+	 * legacy application accessing/modifying it.
+	 */
+	struct _fpstate fpstate_unused;
 	unsigned long extramask[_NSIG_WORDS-1];
 	char retcode[8];
+	/* fp state follows here */
 };
 
 struct rt_sigframe {
@@ -15,13 +24,14 @@ struct rt_sigframe {
 	void __user *puc;
 	struct siginfo info;
 	struct ucontext uc;
-	struct _fpstate fpstate;
 	char retcode[8];
+	/* fp state follows here */
 };
 #else
 struct rt_sigframe {
 	char __user *pretcode;
 	struct ucontext uc;
 	struct siginfo info;
+	/* fp state follows here */
 };
 #endif
diff --git a/arch/x86/kernel/signal_32.c b/arch/x86/kernel/signal_32.c
index 6fb5bcdd8933..8d380b699c0c 100644
--- a/arch/x86/kernel/signal_32.c
+++ b/arch/x86/kernel/signal_32.c
@@ -26,6 +26,7 @@
 #include <asm/uaccess.h>
 #include <asm/i387.h>
 #include <asm/vdso.h>
+#include <asm/syscalls.h>
 
 #include "sigframe.h"
 
@@ -159,28 +160,14 @@ restore_sigcontext(struct pt_regs *regs, struct sigcontext __user *sc,
 	}
 
 	{
-		struct _fpstate __user *buf;
+		void __user *buf;
 
 		err |= __get_user(buf, &sc->fpstate);
-		if (buf) {
-			if (!access_ok(VERIFY_READ, buf, sizeof(*buf)))
-				goto badframe;
-			err |= restore_i387(buf);
-		} else {
-			struct task_struct *me = current;
-
-			if (used_math()) {
-				clear_fpu(me);
-				clear_used_math();
-			}
-		}
+		err |= restore_i387_xstate(buf);
 	}
 
 	err |= __get_user(*pax, &sc->ax);
 	return err;
-
-badframe:
-	return 1;
 }
 
 asmlinkage unsigned long sys_sigreturn(unsigned long __unused)
@@ -262,7 +249,7 @@ badframe:
  * Set up a signal frame.
  */
 static int
-setup_sigcontext(struct sigcontext __user *sc, struct _fpstate __user *fpstate,
+setup_sigcontext(struct sigcontext __user *sc, void __user *fpstate,
 		 struct pt_regs *regs, unsigned long mask)
 {
 	int tmp, err = 0;
@@ -289,7 +276,7 @@ setup_sigcontext(struct sigcontext __user *sc, struct _fpstate __user *fpstate,
 	err |= __put_user(regs->sp, &sc->sp_at_signal);
 	err |= __put_user(regs->ss, (unsigned int __user *)&sc->ss);
 
-	tmp = save_i387(fpstate);
+	tmp = save_i387_xstate(fpstate);
 	if (tmp < 0)
 		err = 1;
 	else
@@ -306,7 +293,8 @@ setup_sigcontext(struct sigcontext __user *sc, struct _fpstate __user *fpstate,
  * Determine which stack to use..
  */
 static inline void __user *
-get_sigframe(struct k_sigaction *ka, struct pt_regs *regs, size_t frame_size)
+get_sigframe(struct k_sigaction *ka, struct pt_regs *regs, size_t frame_size,
+	     void **fpstate)
 {
 	unsigned long sp;
 
@@ -332,6 +320,11 @@ get_sigframe(struct k_sigaction *ka, struct pt_regs *regs, size_t frame_size)
 			sp = (unsigned long) ka->sa.sa_restorer;
 	}
 
+	if (used_math()) {
+		sp = sp - sig_xstate_size;
+		*fpstate = (struct _fpstate *) sp;
+	}
+
 	sp -= frame_size;
 	/*
 	 * Align the stack pointer according to the i386 ABI,
@@ -350,8 +343,9 @@ setup_frame(int sig, struct k_sigaction *ka, sigset_t *set,
 	void __user *restorer;
 	int err = 0;
 	int usig;
+	void __user *fpstate = NULL;
 
-	frame = get_sigframe(ka, regs, sizeof(*frame));
+	frame = get_sigframe(ka, regs, sizeof(*frame), &fpstate);
 
 	if (!access_ok(VERIFY_WRITE, frame, sizeof(*frame)))
 		goto give_sigsegv;
@@ -366,7 +360,7 @@ setup_frame(int sig, struct k_sigaction *ka, sigset_t *set,
 	if (err)
 		goto give_sigsegv;
 
-	err = setup_sigcontext(&frame->sc, &frame->fpstate, regs, set->sig[0]);
+	err = setup_sigcontext(&frame->sc, fpstate, regs, set->sig[0]);
 	if (err)
 		goto give_sigsegv;
 
@@ -427,8 +421,9 @@ static int setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t *info,
 	void __user *restorer;
 	int err = 0;
 	int usig;
+	void __user *fpstate = NULL;
 
-	frame = get_sigframe(ka, regs, sizeof(*frame));
+	frame = get_sigframe(ka, regs, sizeof(*frame), &fpstate);
 
 	if (!access_ok(VERIFY_WRITE, frame, sizeof(*frame)))
 		goto give_sigsegv;
@@ -447,13 +442,16 @@ static int setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t *info,
 		goto give_sigsegv;
 
 	/* Create the ucontext.  */
-	err |= __put_user(0, &frame->uc.uc_flags);
+	if (cpu_has_xsave)
+		err |= __put_user(UC_FP_XSTATE, &frame->uc.uc_flags);
+	else
+		err |= __put_user(0, &frame->uc.uc_flags);
 	err |= __put_user(0, &frame->uc.uc_link);
 	err |= __put_user(current->sas_ss_sp, &frame->uc.uc_stack.ss_sp);
 	err |= __put_user(sas_ss_flags(regs->sp),
 			  &frame->uc.uc_stack.ss_flags);
 	err |= __put_user(current->sas_ss_size, &frame->uc.uc_stack.ss_size);
-	err |= setup_sigcontext(&frame->uc.uc_mcontext, &frame->fpstate,
+	err |= setup_sigcontext(&frame->uc.uc_mcontext, fpstate,
 				regs, set->sig[0]);
 	err |= __copy_to_user(&frame->uc.uc_sigmask, set, sizeof(*set));
 	if (err)
diff --git a/arch/x86/kernel/signal_64.c b/arch/x86/kernel/signal_64.c
index b45ef8ddd651..4665b598a376 100644
--- a/arch/x86/kernel/signal_64.c
+++ b/arch/x86/kernel/signal_64.c
@@ -26,6 +26,7 @@
 #include <asm/proto.h>
 #include <asm/ia32_unistd.h>
 #include <asm/mce.h>
+#include <asm/syscalls.h>
 #include "sigframe.h"
 
 #define _BLOCKABLE (~(sigmask(SIGKILL) | sigmask(SIGSTOP)))
@@ -54,60 +55,6 @@ sys_sigaltstack(const stack_t __user *uss, stack_t __user *uoss,
 }
 
 /*
- * Signal frame handlers.
- */
-
-static inline int save_i387(struct _fpstate __user *buf)
-{
-	struct task_struct *tsk = current;
-	int err = 0;
-
-	BUILD_BUG_ON(sizeof(struct user_i387_struct) !=
-			sizeof(tsk->thread.xstate->fxsave));
-
-	if ((unsigned long)buf % 16)
-		printk("save_i387: bad fpstate %p\n", buf);
-
-	if (!used_math())
-		return 0;
-	clear_used_math(); /* trigger finit */
-	if (task_thread_info(tsk)->status & TS_USEDFPU) {
-		err = save_i387_checking((struct i387_fxsave_struct __user *)
-					 buf);
-		if (err)
-			return err;
-		task_thread_info(tsk)->status &= ~TS_USEDFPU;
-		stts();
-	} else {
-		if (__copy_to_user(buf, &tsk->thread.xstate->fxsave,
-				   sizeof(struct i387_fxsave_struct)))
-			return -1;
-	}
-	return 1;
-}
-
-/*
- * This restores directly out of user space. Exceptions are handled.
- */
-static inline int restore_i387(struct _fpstate __user *buf)
-{
-	struct task_struct *tsk = current;
-	int err;
-
-	if (!used_math()) {
-		err = init_fpu(tsk);
-		if (err)
-			return err;
-	}
-
-	if (!(task_thread_info(current)->status & TS_USEDFPU)) {
-		clts();
-		task_thread_info(current)->status |= TS_USEDFPU;
-	}
-	return restore_fpu_checking((__force struct i387_fxsave_struct *)buf);
-}
-
-/*
  * Do a signal return; undo the signal stack.
  */
 static int
@@ -151,25 +98,11 @@ restore_sigcontext(struct pt_regs *regs, struct sigcontext __user *sc,
 	{
 		struct _fpstate __user * buf;
 		err |= __get_user(buf, &sc->fpstate);
-
-		if (buf) {
-			if (!access_ok(VERIFY_READ, buf, sizeof(*buf)))
-				goto badframe;
-			err |= restore_i387(buf);
-		} else {
-			struct task_struct *me = current;
-			if (used_math()) {
-				clear_fpu(me);
-				clear_used_math();
-			}
-		}
+		err |= restore_i387_xstate(buf);
 	}
 
 	err |= __get_user(*pax, &sc->ax);
 	return err;
-
-badframe:
-	return 1;
 }
 
 asmlinkage long sys_rt_sigreturn(struct pt_regs *regs)
@@ -260,26 +193,23 @@ get_stack(struct k_sigaction *ka, struct pt_regs *regs, unsigned long size)
 			sp = current->sas_ss_sp + current->sas_ss_size;
 	}
 
-	return (void __user *)round_down(sp - size, 16);
+	return (void __user *)round_down(sp - size, 64);
 }
 
 static int setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t *info,
 			   sigset_t *set, struct pt_regs * regs)
 {
 	struct rt_sigframe __user *frame;
-	struct _fpstate __user *fp = NULL; 
+	void __user *fp = NULL;
 	int err = 0;
 	struct task_struct *me = current;
 
 	if (used_math()) {
-		fp = get_stack(ka, regs, sizeof(struct _fpstate)); 
+		fp = get_stack(ka, regs, sig_xstate_size);
 		frame = (void __user *)round_down(
 			(unsigned long)fp - sizeof(struct rt_sigframe), 16) - 8;
 
-		if (!access_ok(VERIFY_WRITE, fp, sizeof(struct _fpstate)))
-			goto give_sigsegv;
-
-		if (save_i387(fp) < 0) 
+		if (save_i387_xstate(fp) < 0)
 			err |= -1; 
 	} else
 		frame = get_stack(ka, regs, sizeof(struct rt_sigframe)) - 8;
@@ -294,7 +224,10 @@ static int setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t *info,
 	}
 		
 	/* Create the ucontext.  */
-	err |= __put_user(0, &frame->uc.uc_flags);
+	if (cpu_has_xsave)
+		err |= __put_user(UC_FP_XSTATE, &frame->uc.uc_flags);
+	else
+		err |= __put_user(0, &frame->uc.uc_flags);
 	err |= __put_user(0, &frame->uc.uc_link);
 	err |= __put_user(me->sas_ss_sp, &frame->uc.uc_stack.ss_sp);
 	err |= __put_user(sas_ss_flags(regs->sp),
diff --git a/arch/x86/kernel/smpboot.c b/arch/x86/kernel/smpboot.c
index 332512767f4f..aa804c64b167 100644
--- a/arch/x86/kernel/smpboot.c
+++ b/arch/x86/kernel/smpboot.c
@@ -88,7 +88,7 @@ static DEFINE_PER_CPU(struct task_struct *, idle_thread_array);
 #define get_idle_for_cpu(x)      (per_cpu(idle_thread_array, x))
 #define set_idle_for_cpu(x, p)   (per_cpu(idle_thread_array, x) = (p))
 #else
-struct task_struct *idle_thread_array[NR_CPUS] __cpuinitdata ;
+static struct task_struct *idle_thread_array[NR_CPUS] __cpuinitdata ;
 #define get_idle_for_cpu(x)      (idle_thread_array[(x)])
 #define set_idle_for_cpu(x, p)   (idle_thread_array[(x)] = (p))
 #endif
@@ -123,13 +123,12 @@ EXPORT_PER_CPU_SYMBOL(cpu_info);
 
 static atomic_t init_deasserted;
 
-static int boot_cpu_logical_apicid;
 
 /* representing cpus for which sibling maps can be computed */
 static cpumask_t cpu_sibling_setup_map;
 
 /* Set if we find a B stepping CPU */
-int __cpuinitdata smp_b_stepping;
+static int __cpuinitdata smp_b_stepping;
 
 #if defined(CONFIG_NUMA) && defined(CONFIG_X86_32)
 
@@ -165,6 +164,8 @@ static void unmap_cpu_to_node(int cpu)
 #endif
 
 #ifdef CONFIG_X86_32
+static int boot_cpu_logical_apicid;
+
 u8 cpu_2_logical_apicid[NR_CPUS] __read_mostly =
 					{ [0 ... NR_CPUS-1] = BAD_APICID };
 
@@ -210,7 +211,7 @@ static void __cpuinit smp_callin(void)
 	/*
 	 * (This works even if the APIC is not enabled.)
 	 */
-	phys_id = GET_APIC_ID(read_apic_id());
+	phys_id = read_apic_id();
 	cpuid = smp_processor_id();
 	if (cpu_isset(cpuid, cpu_callin_map)) {
 		panic("%s: phys CPU#%d, CPU#%d already present??\n", __func__,
@@ -326,12 +327,16 @@ static void __cpuinit start_secondary(void *unused)
 	 * for which cpus receive the IPI. Holding this
 	 * lock helps us to not include this cpu in a currently in progress
 	 * smp_call_function().
+	 *
+	 * We need to hold vector_lock so there the set of online cpus
+	 * does not change while we are assigning vectors to cpus.  Holding
+	 * this lock ensures we don't half assign or remove an irq from a cpu.
 	 */
 	ipi_call_lock_irq();
-#ifdef CONFIG_X86_IO_APIC
-	setup_vector_irq(smp_processor_id());
-#endif
+	lock_vector_lock();
+	__setup_vector_irq(smp_processor_id());
 	cpu_set(smp_processor_id(), cpu_online_map);
+	unlock_vector_lock();
 	ipi_call_unlock_irq();
 	per_cpu(cpu_state, smp_processor_id()) = CPU_ONLINE;
 
@@ -546,8 +551,7 @@ static inline void __inquire_remote_apic(int apicid)
 			printk(KERN_CONT
 			       "a previous APIC delivery may have failed\n");
 
-		apic_write(APIC_ICR2, SET_APIC_DEST_FIELD(apicid));
-		apic_write(APIC_ICR, APIC_DM_REMRD | regs[i]);
+		apic_icr_write(APIC_DM_REMRD | regs[i], apicid);
 
 		timeout = 0;
 		do {
@@ -579,11 +583,9 @@ wakeup_secondary_cpu(int logical_apicid, unsigned long start_eip)
 	int maxlvt;
 
 	/* Target chip */
-	apic_write(APIC_ICR2, SET_APIC_DEST_FIELD(logical_apicid));
-
 	/* Boot on the stack */
 	/* Kick the second */
-	apic_write(APIC_ICR, APIC_DM_NMI | APIC_DEST_LOGICAL);
+	apic_icr_write(APIC_DM_NMI | APIC_DEST_LOGICAL, logical_apicid);
 
 	pr_debug("Waiting for send to finish...\n");
 	send_status = safe_apic_wait_icr_idle();
@@ -636,13 +638,11 @@ wakeup_secondary_cpu(int phys_apicid, unsigned long start_eip)
 	/*
 	 * Turn INIT on target chip
 	 */
-	apic_write(APIC_ICR2, SET_APIC_DEST_FIELD(phys_apicid));
-
 	/*
 	 * Send IPI
 	 */
-	apic_write(APIC_ICR,
-		   APIC_INT_LEVELTRIG | APIC_INT_ASSERT | APIC_DM_INIT);
+	apic_icr_write(APIC_INT_LEVELTRIG | APIC_INT_ASSERT | APIC_DM_INIT,
+		       phys_apicid);
 
 	pr_debug("Waiting for send to finish...\n");
 	send_status = safe_apic_wait_icr_idle();
@@ -652,10 +652,8 @@ wakeup_secondary_cpu(int phys_apicid, unsigned long start_eip)
 	pr_debug("Deasserting INIT.\n");
 
 	/* Target chip */
-	apic_write(APIC_ICR2, SET_APIC_DEST_FIELD(phys_apicid));
-
 	/* Send IPI */
-	apic_write(APIC_ICR, APIC_INT_LEVELTRIG | APIC_DM_INIT);
+	apic_icr_write(APIC_INT_LEVELTRIG | APIC_DM_INIT, phys_apicid);
 
 	pr_debug("Waiting for send to finish...\n");
 	send_status = safe_apic_wait_icr_idle();
@@ -698,11 +696,10 @@ wakeup_secondary_cpu(int phys_apicid, unsigned long start_eip)
 		 */
 
 		/* Target chip */
-		apic_write(APIC_ICR2, SET_APIC_DEST_FIELD(phys_apicid));
-
 		/* Boot on the stack */
 		/* Kick the second */
-		apic_write(APIC_ICR, APIC_DM_STARTUP | (start_eip >> 12));
+		apic_icr_write(APIC_DM_STARTUP | (start_eip >> 12),
+			       phys_apicid);
 
 		/*
 		 * Give the other CPU some time to accept the IPI.
@@ -752,6 +749,14 @@ static void __cpuinit do_fork_idle(struct work_struct *work)
 }
 
 #ifdef CONFIG_X86_64
+
+/* __ref because it's safe to call free_bootmem when after_bootmem == 0. */
+static void __ref free_bootmem_pda(struct x8664_pda *oldpda)
+{
+	if (!after_bootmem)
+		free_bootmem((unsigned long)oldpda, sizeof(*oldpda));
+}
+
 /*
  * Allocate node local memory for the AP pda.
  *
@@ -780,8 +785,7 @@ int __cpuinit get_local_pda(int cpu)
 
 	if (oldpda) {
 		memcpy(newpda, oldpda, size);
-		if (!after_bootmem)
-			free_bootmem((unsigned long)oldpda, size);
+		free_bootmem_pda(oldpda);
 	}
 
 	newpda->in_bootmem = 0;
@@ -1044,6 +1048,34 @@ static __init void disable_smp(void)
 static int __init smp_sanity_check(unsigned max_cpus)
 {
 	preempt_disable();
+
+#if defined(CONFIG_X86_PC) && defined(CONFIG_X86_32)
+	if (def_to_bigsmp && nr_cpu_ids > 8) {
+		unsigned int cpu;
+		unsigned nr;
+
+		printk(KERN_WARNING
+		       "More than 8 CPUs detected - skipping them.\n"
+		       "Use CONFIG_X86_GENERICARCH and CONFIG_X86_BIGSMP.\n");
+
+		nr = 0;
+		for_each_present_cpu(cpu) {
+			if (nr >= 8)
+				cpu_clear(cpu, cpu_present_map);
+			nr++;
+		}
+
+		nr = 0;
+		for_each_possible_cpu(cpu) {
+			if (nr >= 8)
+				cpu_clear(cpu, cpu_possible_map);
+			nr++;
+		}
+
+		nr_cpu_ids = 8;
+	}
+#endif
+
 	if (!physid_isset(hard_smp_processor_id(), phys_cpu_present_map)) {
 		printk(KERN_WARNING "weird, boot CPU (#%d) not listed"
 				    "by the BIOS.\n", hard_smp_processor_id());
@@ -1136,10 +1168,17 @@ void __init native_smp_prepare_cpus(unsigned int max_cpus)
 	 * Setup boot CPU information
 	 */
 	smp_store_cpu_info(0); /* Final full version of the data */
+#ifdef CONFIG_X86_32
 	boot_cpu_logical_apicid = logical_smp_processor_id();
+#endif
 	current_thread_info()->cpu = 0;  /* needed? */
 	set_cpu_sibling_map(0);
 
+#ifdef CONFIG_X86_64
+	enable_IR_x2apic();
+	setup_apic_routing();
+#endif
+
 	if (smp_sanity_check(max_cpus) < 0) {
 		printk(KERN_INFO "SMP disabled\n");
 		disable_smp();
@@ -1147,9 +1186,9 @@ void __init native_smp_prepare_cpus(unsigned int max_cpus)
 	}
 
 	preempt_disable();
-	if (GET_APIC_ID(read_apic_id()) != boot_cpu_physical_apicid) {
+	if (read_apic_id() != boot_cpu_physical_apicid) {
 		panic("Boot APIC ID in local APIC unexpected (%d vs %d)",
-		     GET_APIC_ID(read_apic_id()), boot_cpu_physical_apicid);
+		     read_apic_id(), boot_cpu_physical_apicid);
 		/* Or can we switch back to PIC here? */
 	}
 	preempt_enable();
@@ -1182,6 +1221,9 @@ void __init native_smp_prepare_cpus(unsigned int max_cpus)
 	printk(KERN_INFO "CPU%d: ", 0);
 	print_cpu_info(&cpu_data(0));
 	setup_boot_clock();
+
+	if (is_uv_system())
+		uv_system_init();
 out:
 	preempt_enable();
 }
@@ -1336,7 +1378,9 @@ int __cpu_disable(void)
 	remove_siblinginfo(cpu);
 
 	/* It's now safe to remove this processor from the online map */
+	lock_vector_lock();
 	remove_cpu_from_maps(cpu);
+	unlock_vector_lock();
 	fixup_irqs(cpu_online_map);
 	return 0;
 }
@@ -1370,17 +1414,3 @@ void __cpu_die(unsigned int cpu)
 	BUG();
 }
 #endif
-
-/*
- * If the BIOS enumerates physical processors before logical,
- * maxcpus=N at enumeration-time can be used to disable HT.
- */
-static int __init parse_maxcpus(char *arg)
-{
-	extern unsigned int maxcpus;
-
-	if (arg)
-		maxcpus = simple_strtoul(arg, NULL, 0);
-	return 0;
-}
-early_param("maxcpus", parse_maxcpus);
diff --git a/arch/x86/kernel/smpcommon.c b/arch/x86/kernel/smpcommon.c
index 99941b37eca0..397e309839dd 100644
--- a/arch/x86/kernel/smpcommon.c
+++ b/arch/x86/kernel/smpcommon.c
@@ -8,18 +8,21 @@
 DEFINE_PER_CPU(unsigned long, this_cpu_off);
 EXPORT_PER_CPU_SYMBOL(this_cpu_off);
 
-/* Initialize the CPU's GDT.  This is either the boot CPU doing itself
-   (still using the master per-cpu area), or a CPU doing it for a
-   secondary which will soon come up. */
+/*
+ * Initialize the CPU's GDT.  This is either the boot CPU doing itself
+ * (still using the master per-cpu area), or a CPU doing it for a
+ * secondary which will soon come up.
+ */
 __cpuinit void init_gdt(int cpu)
 {
-	struct desc_struct *gdt = get_cpu_gdt_table(cpu);
+	struct desc_struct gdt;
 
-	pack_descriptor(&gdt[GDT_ENTRY_PERCPU],
-			__per_cpu_offset[cpu], 0xFFFFF,
+	pack_descriptor(&gdt, __per_cpu_offset[cpu], 0xFFFFF,
 			0x2 | DESCTYPE_S, 0x8);
+	gdt.s = 1;
 
-	gdt[GDT_ENTRY_PERCPU].s = 1;
+	write_gdt_entry(get_cpu_gdt_table(cpu),
+			GDT_ENTRY_PERCPU, &gdt, DESCTYPE_S);
 
 	per_cpu(this_cpu_off, cpu) = __per_cpu_offset[cpu];
 	per_cpu(cpu_number, cpu) = cpu;
diff --git a/arch/x86/kernel/summit_32.c b/arch/x86/kernel/summit_32.c
index d67ce5f044ba..7b987852e876 100644
--- a/arch/x86/kernel/summit_32.c
+++ b/arch/x86/kernel/summit_32.c
@@ -30,7 +30,7 @@
 #include <linux/init.h>
 #include <asm/io.h>
 #include <asm/bios_ebda.h>
-#include <asm/mach-summit/mach_mpparse.h>
+#include <asm/summit/mpparse.h>
 
 static struct rio_table_hdr *rio_table_hdr __initdata;
 static struct scal_detail   *scal_devs[MAX_NUMNODES] __initdata;
diff --git a/arch/x86/kernel/sys_i386_32.c b/arch/x86/kernel/sys_i386_32.c
index 7066cb855a60..1884a8d12bfa 100644
--- a/arch/x86/kernel/sys_i386_32.c
+++ b/arch/x86/kernel/sys_i386_32.c
@@ -22,6 +22,8 @@
 #include <linux/uaccess.h>
 #include <linux/unistd.h>
 
+#include <asm/syscalls.h>
+
 asmlinkage long sys_mmap2(unsigned long addr, unsigned long len,
 			  unsigned long prot, unsigned long flags,
 			  unsigned long fd, unsigned long pgoff)
diff --git a/arch/x86/kernel/sys_x86_64.c b/arch/x86/kernel/sys_x86_64.c
index 3b360ef33817..c9288c883e20 100644
--- a/arch/x86/kernel/sys_x86_64.c
+++ b/arch/x86/kernel/sys_x86_64.c
@@ -16,6 +16,7 @@
 
 #include <asm/uaccess.h>
 #include <asm/ia32.h>
+#include <asm/syscalls.h>
 
 asmlinkage long sys_mmap(unsigned long addr, unsigned long len, unsigned long prot, unsigned long flags,
 	unsigned long fd, unsigned long off)
diff --git a/arch/x86/kernel/syscall_64.c b/arch/x86/kernel/syscall_64.c
index 170d43c17487..3d1be4f0fac5 100644
--- a/arch/x86/kernel/syscall_64.c
+++ b/arch/x86/kernel/syscall_64.c
@@ -8,12 +8,12 @@
 #define __NO_STUBS
 
 #define __SYSCALL(nr, sym) extern asmlinkage void sym(void) ;
-#undef _ASM_X86_64_UNISTD_H_
+#undef ASM_X86__UNISTD_64_H
 #include <asm/unistd_64.h>
 
 #undef __SYSCALL
 #define __SYSCALL(nr, sym) [nr] = sym,
-#undef _ASM_X86_64_UNISTD_H_
+#undef ASM_X86__UNISTD_64_H
 
 typedef void (*sys_call_ptr_t)(void);
 
diff --git a/arch/x86/kernel/time_32.c b/arch/x86/kernel/time_32.c
index ffe3c664afc0..bbecf8b6bf96 100644
--- a/arch/x86/kernel/time_32.c
+++ b/arch/x86/kernel/time_32.c
@@ -36,6 +36,7 @@
 #include <asm/arch_hooks.h>
 #include <asm/hpet.h>
 #include <asm/time.h>
+#include <asm/timer.h>
 
 #include "do_timer.h"
 
diff --git a/arch/x86/kernel/tlb_uv.c b/arch/x86/kernel/tlb_uv.c
index d0fbb7712ab0..8b8c0d6640fa 100644
--- a/arch/x86/kernel/tlb_uv.c
+++ b/arch/x86/kernel/tlb_uv.c
@@ -17,6 +17,7 @@
 #include <asm/genapic.h>
 #include <asm/idle.h>
 #include <asm/tsc.h>
+#include <asm/irq_vectors.h>
 
 #include <mach_apic.h>
 
@@ -783,7 +784,7 @@ static int __init uv_bau_init(void)
 		uv_init_blade(blade, node, cur_cpu);
 		cur_cpu += uv_blade_nr_possible_cpus(blade);
 	}
-	set_intr_gate(UV_BAU_MESSAGE, uv_bau_message_intr1);
+	alloc_intr_gate(UV_BAU_MESSAGE, uv_bau_message_intr1);
 	uv_enable_timeouts();
 
 	return 0;
diff --git a/arch/x86/kernel/tls.c b/arch/x86/kernel/tls.c
index ab6bf375a307..6bb7b8579e70 100644
--- a/arch/x86/kernel/tls.c
+++ b/arch/x86/kernel/tls.c
@@ -10,6 +10,7 @@
 #include <asm/ldt.h>
 #include <asm/processor.h>
 #include <asm/proto.h>
+#include <asm/syscalls.h>
 
 #include "tls.h"
 
diff --git a/arch/x86/kernel/traps_32.c b/arch/x86/kernel/traps_32.c
index 03df8e45e5a1..da5a5964fccb 100644
--- a/arch/x86/kernel/traps_32.c
+++ b/arch/x86/kernel/traps_32.c
@@ -1228,7 +1228,6 @@ void __init trap_init(void)
 
 	set_bit(SYSCALL_VECTOR, used_vectors);
 
-	init_thread_xstate();
 	/*
 	 * Should be a barrier for any external CPU state:
 	 */
diff --git a/arch/x86/kernel/traps_64.c b/arch/x86/kernel/traps_64.c
index 3f18d73f420c..b42068fb7b76 100644
--- a/arch/x86/kernel/traps_64.c
+++ b/arch/x86/kernel/traps_64.c
@@ -339,9 +339,8 @@ static void
 show_trace_log_lvl(struct task_struct *task, struct pt_regs *regs,
 		unsigned long *stack, unsigned long bp, char *log_lvl)
 {
-	printk("\nCall Trace:\n");
+	printk("Call Trace:\n");
 	dump_trace(task, regs, stack, bp, &print_trace_ops, log_lvl);
-	printk("\n");
 }
 
 void show_trace(struct task_struct *task, struct pt_regs *regs,
@@ -386,6 +385,7 @@ show_stack_log_lvl(struct task_struct *task, struct pt_regs *regs,
 		printk(" %016lx", *stack++);
 		touch_nmi_watchdog();
 	}
+	printk("\n");
 	show_trace_log_lvl(task, regs, sp, bp, log_lvl);
 }
 
@@ -443,7 +443,6 @@ void show_registers(struct pt_regs *regs)
 		printk("Stack: ");
 		show_stack_log_lvl(NULL, regs, (unsigned long *)sp,
 				regs->bp, "");
-		printk("\n");
 
 		printk(KERN_EMERG "Code: ");
 
@@ -1131,7 +1130,14 @@ asmlinkage void math_state_restore(void)
 	}
 
 	clts();				/* Allow maths ops (or we recurse) */
-	restore_fpu_checking(&me->thread.xstate->fxsave);
+	/*
+	 * Paranoid restore. send a SIGSEGV if we fail to restore the state.
+	 */
+	if (unlikely(restore_fpu_checking(me))) {
+		stts();
+		force_sig(SIGSEGV, me);
+		return;
+	}
 	task_thread_info(me)->status |= TS_USEDFPU;
 	me->fpu_counter++;
 }
@@ -1166,10 +1172,6 @@ void __init trap_init(void)
 	set_system_gate(IA32_SYSCALL_VECTOR, ia32_syscall);
 #endif
 	/*
-	 * initialize the per thread extended state:
-	 */
-	init_thread_xstate();
-	/*
 	 * Should be a barrier for any external CPU state:
 	 */
 	cpu_init();
diff --git a/arch/x86/kernel/tsc.c b/arch/x86/kernel/tsc.c
index 7603c0553909..8f98e9de1b82 100644
--- a/arch/x86/kernel/tsc.c
+++ b/arch/x86/kernel/tsc.c
@@ -104,7 +104,7 @@ __setup("notsc", notsc_setup);
 /*
  * Read TSC and the reference counters. Take care of SMI disturbance
  */
-static u64 __init tsc_read_refs(u64 *pm, u64 *hpet)
+static u64 tsc_read_refs(u64 *pm, u64 *hpet)
 {
 	u64 t1, t2;
 	int i;
@@ -122,80 +122,216 @@ static u64 __init tsc_read_refs(u64 *pm, u64 *hpet)
 	return ULLONG_MAX;
 }
 
-/**
- * native_calibrate_tsc - calibrate the tsc on boot
+/*
+ * Try to calibrate the TSC against the Programmable
+ * Interrupt Timer and return the frequency of the TSC
+ * in kHz.
+ *
+ * Return ULONG_MAX on failure to calibrate.
  */
-unsigned long native_calibrate_tsc(void)
+static unsigned long pit_calibrate_tsc(void)
 {
-	unsigned long flags;
-	u64 tsc1, tsc2, tr1, tr2, delta, pm1, pm2, hpet1, hpet2;
-	int hpet = is_hpet_enabled();
-	unsigned int tsc_khz_val = 0;
-
-	local_irq_save(flags);
-
-	tsc1 = tsc_read_refs(&pm1, hpet ? &hpet1 : NULL);
+	u64 tsc, t1, t2, delta;
+	unsigned long tscmin, tscmax;
+	int pitcnt;
 
+	/* Set the Gate high, disable speaker */
 	outb((inb(0x61) & ~0x02) | 0x01, 0x61);
 
+	/*
+	 * Setup CTC channel 2* for mode 0, (interrupt on terminal
+	 * count mode), binary count. Set the latch register to 50ms
+	 * (LSB then MSB) to begin countdown.
+	 */
 	outb(0xb0, 0x43);
 	outb((CLOCK_TICK_RATE / (1000 / 50)) & 0xff, 0x42);
 	outb((CLOCK_TICK_RATE / (1000 / 50)) >> 8, 0x42);
-	tr1 = get_cycles();
-	while ((inb(0x61) & 0x20) == 0);
-	tr2 = get_cycles();
 
-	tsc2 = tsc_read_refs(&pm2, hpet ? &hpet2 : NULL);
+	tsc = t1 = t2 = get_cycles();
 
-	local_irq_restore(flags);
+	pitcnt = 0;
+	tscmax = 0;
+	tscmin = ULONG_MAX;
+	while ((inb(0x61) & 0x20) == 0) {
+		t2 = get_cycles();
+		delta = t2 - tsc;
+		tsc = t2;
+		if ((unsigned long) delta < tscmin)
+			tscmin = (unsigned int) delta;
+		if ((unsigned long) delta > tscmax)
+			tscmax = (unsigned int) delta;
+		pitcnt++;
+	}
 
 	/*
-	 * Preset the result with the raw and inaccurate PIT
-	 * calibration value
+	 * Sanity checks:
+	 *
+	 * If we were not able to read the PIT more than 5000
+	 * times, then we have been hit by a massive SMI
+	 *
+	 * If the maximum is 10 times larger than the minimum,
+	 * then we got hit by an SMI as well.
 	 */
-	delta = (tr2 - tr1);
+	if (pitcnt < 5000 || tscmax > 10 * tscmin)
+		return ULONG_MAX;
+
+	/* Calculate the PIT value */
+	delta = t2 - t1;
 	do_div(delta, 50);
-	tsc_khz_val = delta;
+	return delta;
+}
+
+
+/**
+ * native_calibrate_tsc - calibrate the tsc on boot
+ */
+unsigned long native_calibrate_tsc(void)
+{
+	u64 tsc1, tsc2, delta, pm1, pm2, hpet1, hpet2;
+	unsigned long tsc_pit_min = ULONG_MAX, tsc_ref_min = ULONG_MAX;
+	unsigned long flags;
+	int hpet = is_hpet_enabled(), i;
+
+	/*
+	 * Run 5 calibration loops to get the lowest frequency value
+	 * (the best estimate). We use two different calibration modes
+	 * here:
+	 *
+	 * 1) PIT loop. We set the PIT Channel 2 to oneshot mode and
+	 * load a timeout of 50ms. We read the time right after we
+	 * started the timer and wait until the PIT count down reaches
+	 * zero. In each wait loop iteration we read the TSC and check
+	 * the delta to the previous read. We keep track of the min
+	 * and max values of that delta. The delta is mostly defined
+	 * by the IO time of the PIT access, so we can detect when a
+	 * SMI/SMM disturbance happend between the two reads. If the
+	 * maximum time is significantly larger than the minimum time,
+	 * then we discard the result and have another try.
+	 *
+	 * 2) Reference counter. If available we use the HPET or the
+	 * PMTIMER as a reference to check the sanity of that value.
+	 * We use separate TSC readouts and check inside of the
+	 * reference read for a SMI/SMM disturbance. We dicard
+	 * disturbed values here as well. We do that around the PIT
+	 * calibration delay loop as we have to wait for a certain
+	 * amount of time anyway.
+	 */
+	for (i = 0; i < 5; i++) {
+		unsigned long tsc_pit_khz;
+
+		/*
+		 * Read the start value and the reference count of
+		 * hpet/pmtimer when available. Then do the PIT
+		 * calibration, which will take at least 50ms, and
+		 * read the end value.
+		 */
+		local_irq_save(flags);
+		tsc1 = tsc_read_refs(&pm1, hpet ? &hpet1 : NULL);
+		tsc_pit_khz = pit_calibrate_tsc();
+		tsc2 = tsc_read_refs(&pm2, hpet ? &hpet2 : NULL);
+		local_irq_restore(flags);
+
+		/* Pick the lowest PIT TSC calibration so far */
+		tsc_pit_min = min(tsc_pit_min, tsc_pit_khz);
+
+		/* hpet or pmtimer available ? */
+		if (!hpet && !pm1 && !pm2)
+			continue;
+
+		/* Check, whether the sampling was disturbed by an SMI */
+		if (tsc1 == ULLONG_MAX || tsc2 == ULLONG_MAX)
+			continue;
+
+		tsc2 = (tsc2 - tsc1) * 1000000LL;
+
+		if (hpet) {
+			if (hpet2 < hpet1)
+				hpet2 += 0x100000000ULL;
+			hpet2 -= hpet1;
+			tsc1 = ((u64)hpet2 * hpet_readl(HPET_PERIOD));
+			do_div(tsc1, 1000000);
+		} else {
+			if (pm2 < pm1)
+				pm2 += (u64)ACPI_PM_OVRRUN;
+			pm2 -= pm1;
+			tsc1 = pm2 * 1000000000LL;
+			do_div(tsc1, PMTMR_TICKS_PER_SEC);
+		}
+
+		do_div(tsc2, tsc1);
+		tsc_ref_min = min(tsc_ref_min, (unsigned long) tsc2);
+	}
+
+	/*
+	 * Now check the results.
+	 */
+	if (tsc_pit_min == ULONG_MAX) {
+		/* PIT gave no useful value */
+		printk(KERN_WARNING "TSC: Unable to calibrate against PIT\n");
+
+		/* We don't have an alternative source, disable TSC */
+		if (!hpet && !pm1 && !pm2) {
+			printk("TSC: No reference (HPET/PMTIMER) available\n");
+			return 0;
+		}
+
+		/* The alternative source failed as well, disable TSC */
+		if (tsc_ref_min == ULONG_MAX) {
+			printk(KERN_WARNING "TSC: HPET/PMTIMER calibration "
+			       "failed due to SMI disturbance.\n");
+			return 0;
+		}
+
+		/* Use the alternative source */
+		printk(KERN_INFO "TSC: using %s reference calibration\n",
+		       hpet ? "HPET" : "PMTIMER");
+
+		return tsc_ref_min;
+	}
 
-	/* hpet or pmtimer available ? */
+	/* We don't have an alternative source, use the PIT calibration value */
 	if (!hpet && !pm1 && !pm2) {
-		printk(KERN_INFO "TSC calibrated against PIT\n");
-		goto out;
+		printk(KERN_INFO "TSC: Using PIT calibration value\n");
+		return tsc_pit_min;
 	}
 
-	/* Check, whether the sampling was disturbed by an SMI */
-	if (tsc1 == ULLONG_MAX || tsc2 == ULLONG_MAX) {
-		printk(KERN_WARNING "TSC calibration disturbed by SMI, "
-				"using PIT calibration result\n");
-		goto out;
+	/* The alternative source failed, use the PIT calibration value */
+	if (tsc_ref_min == ULONG_MAX) {
+		printk(KERN_WARNING "TSC: HPET/PMTIMER calibration failed due "
+		       "to SMI disturbance. Using PIT calibration\n");
+		return tsc_pit_min;
 	}
 
-	tsc2 = (tsc2 - tsc1) * 1000000LL;
-
-	if (hpet) {
-		printk(KERN_INFO "TSC calibrated against HPET\n");
-		if (hpet2 < hpet1)
-			hpet2 += 0x100000000ULL;
-		hpet2 -= hpet1;
-		tsc1 = ((u64)hpet2 * hpet_readl(HPET_PERIOD));
-		do_div(tsc1, 1000000);
-	} else {
-		printk(KERN_INFO "TSC calibrated against PM_TIMER\n");
-		if (pm2 < pm1)
-			pm2 += (u64)ACPI_PM_OVRRUN;
-		pm2 -= pm1;
-		tsc1 = pm2 * 1000000000LL;
-		do_div(tsc1, PMTMR_TICKS_PER_SEC);
+	/* Check the reference deviation */
+	delta = ((u64) tsc_pit_min) * 100;
+	do_div(delta, tsc_ref_min);
+
+	/*
+	 * If both calibration results are inside a 5% window, the we
+	 * use the lower frequency of those as it is probably the
+	 * closest estimate.
+	 */
+	if (delta >= 95 && delta <= 105) {
+		printk(KERN_INFO "TSC: PIT calibration confirmed by %s.\n",
+		       hpet ? "HPET" : "PMTIMER");
+		printk(KERN_INFO "TSC: using %s calibration value\n",
+		       tsc_pit_min <= tsc_ref_min ? "PIT" :
+		       hpet ? "HPET" : "PMTIMER");
+		return tsc_pit_min <= tsc_ref_min ? tsc_pit_min : tsc_ref_min;
 	}
 
-	do_div(tsc2, tsc1);
-	tsc_khz_val = tsc2;
+	printk(KERN_WARNING "TSC: PIT calibration deviates from %s: %lu %lu.\n",
+	       hpet ? "HPET" : "PMTIMER", tsc_pit_min, tsc_ref_min);
 
-out:
-	return tsc_khz_val;
+	/*
+	 * The calibration values differ too much. In doubt, we use
+	 * the PIT value as we know that there are PMTIMERs around
+	 * running at double speed.
+	 */
+	printk(KERN_INFO "TSC: Using PIT calibration value\n");
+	return tsc_pit_min;
 }
 
-
 #ifdef CONFIG_X86_32
 /* Only called from the Powernow K7 cpu freq driver */
 int recalibrate_cpu_khz(void)
@@ -314,7 +450,7 @@ static int time_cpufreq_notifier(struct notifier_block *nb, unsigned long val,
 			mark_tsc_unstable("cpufreq changes");
 	}
 
-	set_cyc2ns_scale(tsc_khz_ref, freq->cpu);
+	set_cyc2ns_scale(tsc_khz, freq->cpu);
 
 	return 0;
 }
@@ -325,6 +461,10 @@ static struct notifier_block time_cpufreq_notifier_block = {
 
 static int __init cpufreq_tsc(void)
 {
+	if (!cpu_has_tsc)
+		return 0;
+	if (boot_cpu_has(X86_FEATURE_CONSTANT_TSC))
+		return 0;
 	cpufreq_register_notifier(&time_cpufreq_notifier_block,
 				CPUFREQ_TRANSITION_NOTIFIER);
 	return 0;
diff --git a/arch/x86/kernel/tsc_sync.c b/arch/x86/kernel/tsc_sync.c
index 0577825cf89b..9ffb01c31c40 100644
--- a/arch/x86/kernel/tsc_sync.c
+++ b/arch/x86/kernel/tsc_sync.c
@@ -88,11 +88,9 @@ static __cpuinit void check_tsc_warp(void)
 			__raw_spin_unlock(&sync_lock);
 		}
 	}
-	if (!(now-start)) {
-		printk("Warning: zero tsc calibration delta: %Ld [max: %Ld]\n",
+	WARN(!(now-start),
+		"Warning: zero tsc calibration delta: %Ld [max: %Ld]\n",
 			now-start, end-start);
-		WARN_ON(1);
-	}
 }
 
 /*
diff --git a/arch/x86/kernel/visws_quirks.c b/arch/x86/kernel/visws_quirks.c
index 41e01b145c48..594ef47f0a63 100644
--- a/arch/x86/kernel/visws_quirks.c
+++ b/arch/x86/kernel/visws_quirks.c
@@ -184,8 +184,6 @@ static int __init visws_get_smp_config(unsigned int early)
 	return 1;
 }
 
-extern unsigned int __cpuinitdata maxcpus;
-
 /*
  * The Visual Workstation is Intel MP compliant in the hardware
  * sense, but it doesn't have a BIOS(-configuration table).
@@ -244,8 +242,8 @@ static int __init visws_find_smp_config(unsigned int reserve)
 		ncpus = CO_CPU_MAX;
 	}
 
-	if (ncpus > maxcpus)
-		ncpus = maxcpus;
+	if (ncpus > setup_max_cpus)
+		ncpus = setup_max_cpus;
 
 #ifdef CONFIG_X86_LOCAL_APIC
 	smp_found_config = 1;
diff --git a/arch/x86/kernel/vm86_32.c b/arch/x86/kernel/vm86_32.c
index 38f566fa27d2..4eeb5cf9720d 100644
--- a/arch/x86/kernel/vm86_32.c
+++ b/arch/x86/kernel/vm86_32.c
@@ -46,6 +46,7 @@
 #include <asm/io.h>
 #include <asm/tlbflush.h>
 #include <asm/irq.h>
+#include <asm/syscalls.h>
 
 /*
  * Known problems:
diff --git a/arch/x86/kernel/vmi_32.c b/arch/x86/kernel/vmi_32.c
index 0a1b1a9d922d..61531d5c9507 100644
--- a/arch/x86/kernel/vmi_32.c
+++ b/arch/x86/kernel/vmi_32.c
@@ -37,6 +37,7 @@
 #include <asm/timer.h>
 #include <asm/vmi_time.h>
 #include <asm/kmap_types.h>
+#include <asm/setup.h>
 
 /* Convenient for calling VMI functions indirectly in the ROM */
 typedef u32 __attribute__((regparm(1))) (VROMFUNC)(void);
@@ -683,7 +684,7 @@ void vmi_bringup(void)
 {
  	/* We must establish the lowmem mapping for MMU ops to work */
 	if (vmi_ops.set_linear_mapping)
-		vmi_ops.set_linear_mapping(0, (void *)__PAGE_OFFSET, max_low_pfn, 0);
+		vmi_ops.set_linear_mapping(0, (void *)__PAGE_OFFSET, MAXMEM_PFN, 0);
 }
 
 /*
@@ -904,8 +905,8 @@ static inline int __init activate_vmi(void)
 #endif
 
 #ifdef CONFIG_X86_LOCAL_APIC
-	para_fill(pv_apic_ops.apic_read, APICRead);
-	para_fill(pv_apic_ops.apic_write, APICWrite);
+       para_fill(apic_ops->read, APICRead);
+       para_fill(apic_ops->write, APICWrite);
 #endif
 
 	/*
diff --git a/arch/x86/kernel/vmlinux_32.lds.S b/arch/x86/kernel/vmlinux_32.lds.S
index cdb2363697d2..a9b8560adbc2 100644
--- a/arch/x86/kernel/vmlinux_32.lds.S
+++ b/arch/x86/kernel/vmlinux_32.lds.S
@@ -140,10 +140,10 @@ SECTIONS
 	*(.con_initcall.init)
   	__con_initcall_end = .;
   }
-  .x86cpuvendor.init : AT(ADDR(.x86cpuvendor.init) - LOAD_OFFSET) {
-	__x86cpuvendor_start = .;
-	*(.x86cpuvendor.init)
-	__x86cpuvendor_end = .;
+  .x86_cpu_dev.init : AT(ADDR(.x86_cpu_dev.init) - LOAD_OFFSET) {
+	__x86_cpu_dev_start = .;
+	*(.x86_cpu_dev.init)
+	__x86_cpu_dev_end = .;
   }
   SECURITY_INIT
   . = ALIGN(4);
@@ -180,6 +180,7 @@ SECTIONS
   . = ALIGN(PAGE_SIZE);
   .data.percpu  : AT(ADDR(.data.percpu) - LOAD_OFFSET) {
 	__per_cpu_start = .;
+	*(.data.percpu.page_aligned)
 	*(.data.percpu)
 	*(.data.percpu.shared_aligned)
 	__per_cpu_end = .;
@@ -209,3 +210,11 @@ SECTIONS
 
   DWARF_DEBUG
 }
+
+#ifdef CONFIG_KEXEC
+/* Link time checks */
+#include <asm/kexec.h>
+
+ASSERT(kexec_control_code_size <= KEXEC_CONTROL_CODE_MAX_SIZE,
+       "kexec control code size is too big")
+#endif
diff --git a/arch/x86/kernel/vmlinux_64.lds.S b/arch/x86/kernel/vmlinux_64.lds.S
index 63e5c1a22e88..201e81a91a95 100644
--- a/arch/x86/kernel/vmlinux_64.lds.S
+++ b/arch/x86/kernel/vmlinux_64.lds.S
@@ -168,13 +168,12 @@ SECTIONS
 	*(.con_initcall.init)
   }
   __con_initcall_end = .;
-  . = ALIGN(16);
-  __x86cpuvendor_start = .;
-  .x86cpuvendor.init : AT(ADDR(.x86cpuvendor.init) - LOAD_OFFSET) {
-	*(.x86cpuvendor.init)
+  __x86_cpu_dev_start = .;
+  .x86_cpu_dev.init : AT(ADDR(.x86_cpu_dev.init) - LOAD_OFFSET) {
+	*(.x86_cpu_dev.init)
   }
-  __x86cpuvendor_end = .;
   SECURITY_INIT
+  __x86_cpu_dev_end = .;
 
   . = ALIGN(8);
   .parainstructions : AT(ADDR(.parainstructions) - LOAD_OFFSET) {
diff --git a/arch/x86/kernel/xsave.c b/arch/x86/kernel/xsave.c
new file mode 100644
index 000000000000..07713d64debe
--- /dev/null
+++ b/arch/x86/kernel/xsave.c
@@ -0,0 +1,316 @@
+/*
+ * xsave/xrstor support.
+ *
+ * Author: Suresh Siddha <suresh.b.siddha@intel.com>
+ */
+#include <linux/bootmem.h>
+#include <linux/compat.h>
+#include <asm/i387.h>
+#ifdef CONFIG_IA32_EMULATION
+#include <asm/sigcontext32.h>
+#endif
+#include <asm/xcr.h>
+
+/*
+ * Supported feature mask by the CPU and the kernel.
+ */
+u64 pcntxt_mask;
+
+struct _fpx_sw_bytes fx_sw_reserved;
+#ifdef CONFIG_IA32_EMULATION
+struct _fpx_sw_bytes fx_sw_reserved_ia32;
+#endif
+
+/*
+ * Check for the presence of extended state information in the
+ * user fpstate pointer in the sigcontext.
+ */
+int check_for_xstate(struct i387_fxsave_struct __user *buf,
+		     void __user *fpstate,
+		     struct _fpx_sw_bytes *fx_sw_user)
+{
+	int min_xstate_size = sizeof(struct i387_fxsave_struct) +
+			      sizeof(struct xsave_hdr_struct);
+	unsigned int magic2;
+	int err;
+
+	err = __copy_from_user(fx_sw_user, &buf->sw_reserved[0],
+			       sizeof(struct _fpx_sw_bytes));
+
+	if (err)
+		return err;
+
+	/*
+	 * First Magic check failed.
+	 */
+	if (fx_sw_user->magic1 != FP_XSTATE_MAGIC1)
+		return -1;
+
+	/*
+	 * Check for error scenarios.
+	 */
+	if (fx_sw_user->xstate_size < min_xstate_size ||
+	    fx_sw_user->xstate_size > xstate_size ||
+	    fx_sw_user->xstate_size > fx_sw_user->extended_size)
+		return -1;
+
+	err = __get_user(magic2, (__u32 *) (((void *)fpstate) +
+					    fx_sw_user->extended_size -
+					    FP_XSTATE_MAGIC2_SIZE));
+	/*
+	 * Check for the presence of second magic word at the end of memory
+	 * layout. This detects the case where the user just copied the legacy
+	 * fpstate layout with out copying the extended state information
+	 * in the memory layout.
+	 */
+	if (err || magic2 != FP_XSTATE_MAGIC2)
+		return -1;
+
+	return 0;
+}
+
+#ifdef CONFIG_X86_64
+/*
+ * Signal frame handlers.
+ */
+
+int save_i387_xstate(void __user *buf)
+{
+	struct task_struct *tsk = current;
+	int err = 0;
+
+	if (!access_ok(VERIFY_WRITE, buf, sig_xstate_size))
+		return -EACCES;
+
+	BUG_ON(sig_xstate_size < xstate_size);
+
+	if ((unsigned long)buf % 64)
+		printk("save_i387_xstate: bad fpstate %p\n", buf);
+
+	if (!used_math())
+		return 0;
+	clear_used_math(); /* trigger finit */
+	if (task_thread_info(tsk)->status & TS_USEDFPU) {
+		/*
+	 	 * Start with clearing the user buffer. This will present a
+	 	 * clean context for the bytes not touched by the fxsave/xsave.
+		 */
+		__clear_user(buf, sig_xstate_size);
+
+		if (task_thread_info(tsk)->status & TS_XSAVE)
+			err = xsave_user(buf);
+		else
+			err = fxsave_user(buf);
+
+		if (err)
+			return err;
+		task_thread_info(tsk)->status &= ~TS_USEDFPU;
+		stts();
+	} else {
+		if (__copy_to_user(buf, &tsk->thread.xstate->fxsave,
+				   xstate_size))
+			return -1;
+	}
+
+	if (task_thread_info(tsk)->status & TS_XSAVE) {
+		struct _fpstate __user *fx = buf;
+
+		err = __copy_to_user(&fx->sw_reserved, &fx_sw_reserved,
+				     sizeof(struct _fpx_sw_bytes));
+
+		err |= __put_user(FP_XSTATE_MAGIC2,
+				  (__u32 __user *) (buf + sig_xstate_size
+						    - FP_XSTATE_MAGIC2_SIZE));
+	}
+
+	return 1;
+}
+
+/*
+ * Restore the extended state if present. Otherwise, restore the FP/SSE
+ * state.
+ */
+int restore_user_xstate(void __user *buf)
+{
+	struct _fpx_sw_bytes fx_sw_user;
+	u64 mask;
+	int err;
+
+	if (((unsigned long)buf % 64) ||
+	     check_for_xstate(buf, buf, &fx_sw_user))
+		goto fx_only;
+
+	mask = fx_sw_user.xstate_bv;
+
+	/*
+	 * restore the state passed by the user.
+	 */
+	err = xrestore_user(buf, mask);
+	if (err)
+		return err;
+
+	/*
+	 * init the state skipped by the user.
+	 */
+	mask = pcntxt_mask & ~mask;
+
+	xrstor_state(init_xstate_buf, mask);
+
+	return 0;
+
+fx_only:
+	/*
+	 * couldn't find the extended state information in the
+	 * memory layout. Restore just the FP/SSE and init all
+	 * the other extended state.
+	 */
+	xrstor_state(init_xstate_buf, pcntxt_mask & ~XSTATE_FPSSE);
+	return fxrstor_checking((__force struct i387_fxsave_struct *)buf);
+}
+
+/*
+ * This restores directly out of user space. Exceptions are handled.
+ */
+int restore_i387_xstate(void __user *buf)
+{
+	struct task_struct *tsk = current;
+	int err = 0;
+
+	if (!buf) {
+		if (used_math())
+			goto clear;
+		return 0;
+	} else
+		if (!access_ok(VERIFY_READ, buf, sig_xstate_size))
+			return -EACCES;
+
+	if (!used_math()) {
+		err = init_fpu(tsk);
+		if (err)
+			return err;
+	}
+
+	if (!(task_thread_info(current)->status & TS_USEDFPU)) {
+		clts();
+		task_thread_info(current)->status |= TS_USEDFPU;
+	}
+	if (task_thread_info(tsk)->status & TS_XSAVE)
+		err = restore_user_xstate(buf);
+	else
+		err = fxrstor_checking((__force struct i387_fxsave_struct *)
+				       buf);
+	if (unlikely(err)) {
+		/*
+		 * Encountered an error while doing the restore from the
+		 * user buffer, clear the fpu state.
+		 */
+clear:
+		clear_fpu(tsk);
+		clear_used_math();
+	}
+	return err;
+}
+#endif
+
+/*
+ * Prepare the SW reserved portion of the fxsave memory layout, indicating
+ * the presence of the extended state information in the memory layout
+ * pointed by the fpstate pointer in the sigcontext.
+ * This will be saved when ever the FP and extended state context is
+ * saved on the user stack during the signal handler delivery to the user.
+ */
+void prepare_fx_sw_frame(void)
+{
+	int size_extended = (xstate_size - sizeof(struct i387_fxsave_struct)) +
+			     FP_XSTATE_MAGIC2_SIZE;
+
+	sig_xstate_size = sizeof(struct _fpstate) + size_extended;
+
+#ifdef CONFIG_IA32_EMULATION
+	sig_xstate_ia32_size = sizeof(struct _fpstate_ia32) + size_extended;
+#endif
+
+	memset(&fx_sw_reserved, 0, sizeof(fx_sw_reserved));
+
+	fx_sw_reserved.magic1 = FP_XSTATE_MAGIC1;
+	fx_sw_reserved.extended_size = sig_xstate_size;
+	fx_sw_reserved.xstate_bv = pcntxt_mask;
+	fx_sw_reserved.xstate_size = xstate_size;
+#ifdef CONFIG_IA32_EMULATION
+	memcpy(&fx_sw_reserved_ia32, &fx_sw_reserved,
+	       sizeof(struct _fpx_sw_bytes));
+	fx_sw_reserved_ia32.extended_size = sig_xstate_ia32_size;
+#endif
+}
+
+/*
+ * Represents init state for the supported extended state.
+ */
+struct xsave_struct *init_xstate_buf;
+
+#ifdef CONFIG_X86_64
+unsigned int sig_xstate_size = sizeof(struct _fpstate);
+#endif
+
+/*
+ * Enable the extended processor state save/restore feature
+ */
+void __cpuinit xsave_init(void)
+{
+	if (!cpu_has_xsave)
+		return;
+
+	set_in_cr4(X86_CR4_OSXSAVE);
+
+	/*
+	 * Enable all the features that the HW is capable of
+	 * and the Linux kernel is aware of.
+	 */
+	xsetbv(XCR_XFEATURE_ENABLED_MASK, pcntxt_mask);
+}
+
+/*
+ * setup the xstate image representing the init state
+ */
+void setup_xstate_init(void)
+{
+	init_xstate_buf = alloc_bootmem(xstate_size);
+	init_xstate_buf->i387.mxcsr = MXCSR_DEFAULT;
+}
+
+/*
+ * Enable and initialize the xsave feature.
+ */
+void __init xsave_cntxt_init(void)
+{
+	unsigned int eax, ebx, ecx, edx;
+
+	cpuid_count(0xd, 0, &eax, &ebx, &ecx, &edx);
+	pcntxt_mask = eax + ((u64)edx << 32);
+
+	if ((pcntxt_mask & XSTATE_FPSSE) != XSTATE_FPSSE) {
+		printk(KERN_ERR "FP/SSE not shown under xsave features 0x%llx\n",
+		       pcntxt_mask);
+		BUG();
+	}
+
+	/*
+	 * for now OS knows only about FP/SSE
+	 */
+	pcntxt_mask = pcntxt_mask & XCNTXT_MASK;
+	xsave_init();
+
+	/*
+	 * Recompute the context size for enabled features
+	 */
+	cpuid_count(0xd, 0, &eax, &ebx, &ecx, &edx);
+	xstate_size = ebx;
+
+	prepare_fx_sw_frame();
+
+	setup_xstate_init();
+
+	printk(KERN_INFO "xsave/xrstor: enabled xstate_bv 0x%llx, "
+	       "cntxt size 0x%x\n",
+	       pcntxt_mask, xstate_size);
+}
diff --git a/arch/x86/kvm/Kconfig b/arch/x86/kvm/Kconfig
index 8d45fabc5f3b..ce3251ce5504 100644
--- a/arch/x86/kvm/Kconfig
+++ b/arch/x86/kvm/Kconfig
@@ -21,6 +21,7 @@ config KVM
 	tristate "Kernel-based Virtual Machine (KVM) support"
 	depends on HAVE_KVM
 	select PREEMPT_NOTIFIERS
+	select MMU_NOTIFIER
 	select ANON_INODES
 	---help---
 	  Support hosting fully virtualized guest machines using hardware
diff --git a/arch/x86/kvm/mmu.c b/arch/x86/kvm/mmu.c
index b0e4ddca6c18..0bfe2bd305eb 100644
--- a/arch/x86/kvm/mmu.c
+++ b/arch/x86/kvm/mmu.c
@@ -653,6 +653,84 @@ static void rmap_write_protect(struct kvm *kvm, u64 gfn)
 	account_shadowed(kvm, gfn);
 }
 
+static int kvm_unmap_rmapp(struct kvm *kvm, unsigned long *rmapp)
+{
+	u64 *spte;
+	int need_tlb_flush = 0;
+
+	while ((spte = rmap_next(kvm, rmapp, NULL))) {
+		BUG_ON(!(*spte & PT_PRESENT_MASK));
+		rmap_printk("kvm_rmap_unmap_hva: spte %p %llx\n", spte, *spte);
+		rmap_remove(kvm, spte);
+		set_shadow_pte(spte, shadow_trap_nonpresent_pte);
+		need_tlb_flush = 1;
+	}
+	return need_tlb_flush;
+}
+
+static int kvm_handle_hva(struct kvm *kvm, unsigned long hva,
+			  int (*handler)(struct kvm *kvm, unsigned long *rmapp))
+{
+	int i;
+	int retval = 0;
+
+	/*
+	 * If mmap_sem isn't taken, we can look the memslots with only
+	 * the mmu_lock by skipping over the slots with userspace_addr == 0.
+	 */
+	for (i = 0; i < kvm->nmemslots; i++) {
+		struct kvm_memory_slot *memslot = &kvm->memslots[i];
+		unsigned long start = memslot->userspace_addr;
+		unsigned long end;
+
+		/* mmu_lock protects userspace_addr */
+		if (!start)
+			continue;
+
+		end = start + (memslot->npages << PAGE_SHIFT);
+		if (hva >= start && hva < end) {
+			gfn_t gfn_offset = (hva - start) >> PAGE_SHIFT;
+			retval |= handler(kvm, &memslot->rmap[gfn_offset]);
+			retval |= handler(kvm,
+					  &memslot->lpage_info[
+						  gfn_offset /
+						  KVM_PAGES_PER_HPAGE].rmap_pde);
+		}
+	}
+
+	return retval;
+}
+
+int kvm_unmap_hva(struct kvm *kvm, unsigned long hva)
+{
+	return kvm_handle_hva(kvm, hva, kvm_unmap_rmapp);
+}
+
+static int kvm_age_rmapp(struct kvm *kvm, unsigned long *rmapp)
+{
+	u64 *spte;
+	int young = 0;
+
+	spte = rmap_next(kvm, rmapp, NULL);
+	while (spte) {
+		int _young;
+		u64 _spte = *spte;
+		BUG_ON(!(_spte & PT_PRESENT_MASK));
+		_young = _spte & PT_ACCESSED_MASK;
+		if (_young) {
+			young = 1;
+			clear_bit(PT_ACCESSED_SHIFT, (unsigned long *)spte);
+		}
+		spte = rmap_next(kvm, rmapp, spte);
+	}
+	return young;
+}
+
+int kvm_age_hva(struct kvm *kvm, unsigned long hva)
+{
+	return kvm_handle_hva(kvm, hva, kvm_age_rmapp);
+}
+
 #ifdef MMU_DEBUG
 static int is_empty_shadow_page(u64 *spt)
 {
@@ -1203,6 +1281,7 @@ static int nonpaging_map(struct kvm_vcpu *vcpu, gva_t v, int write, gfn_t gfn)
 	int r;
 	int largepage = 0;
 	pfn_t pfn;
+	unsigned long mmu_seq;
 
 	down_read(&current->mm->mmap_sem);
 	if (is_largepage_backed(vcpu, gfn & ~(KVM_PAGES_PER_HPAGE-1))) {
@@ -1210,6 +1289,8 @@ static int nonpaging_map(struct kvm_vcpu *vcpu, gva_t v, int write, gfn_t gfn)
 		largepage = 1;
 	}
 
+	mmu_seq = vcpu->kvm->mmu_notifier_seq;
+	/* implicit mb(), we'll read before PT lock is unlocked */
 	pfn = gfn_to_pfn(vcpu->kvm, gfn);
 	up_read(&current->mm->mmap_sem);
 
@@ -1220,6 +1301,8 @@ static int nonpaging_map(struct kvm_vcpu *vcpu, gva_t v, int write, gfn_t gfn)
 	}
 
 	spin_lock(&vcpu->kvm->mmu_lock);
+	if (mmu_notifier_retry(vcpu, mmu_seq))
+		goto out_unlock;
 	kvm_mmu_free_some_pages(vcpu);
 	r = __direct_map(vcpu, v, write, largepage, gfn, pfn,
 			 PT32E_ROOT_LEVEL);
@@ -1227,6 +1310,11 @@ static int nonpaging_map(struct kvm_vcpu *vcpu, gva_t v, int write, gfn_t gfn)
 
 
 	return r;
+
+out_unlock:
+	spin_unlock(&vcpu->kvm->mmu_lock);
+	kvm_release_pfn_clean(pfn);
+	return 0;
 }
 
 
@@ -1345,6 +1433,7 @@ static int tdp_page_fault(struct kvm_vcpu *vcpu, gva_t gpa,
 	int r;
 	int largepage = 0;
 	gfn_t gfn = gpa >> PAGE_SHIFT;
+	unsigned long mmu_seq;
 
 	ASSERT(vcpu);
 	ASSERT(VALID_PAGE(vcpu->arch.mmu.root_hpa));
@@ -1358,6 +1447,8 @@ static int tdp_page_fault(struct kvm_vcpu *vcpu, gva_t gpa,
 		gfn &= ~(KVM_PAGES_PER_HPAGE-1);
 		largepage = 1;
 	}
+	mmu_seq = vcpu->kvm->mmu_notifier_seq;
+	/* implicit mb(), we'll read before PT lock is unlocked */
 	pfn = gfn_to_pfn(vcpu->kvm, gfn);
 	up_read(&current->mm->mmap_sem);
 	if (is_error_pfn(pfn)) {
@@ -1365,12 +1456,19 @@ static int tdp_page_fault(struct kvm_vcpu *vcpu, gva_t gpa,
 		return 1;
 	}
 	spin_lock(&vcpu->kvm->mmu_lock);
+	if (mmu_notifier_retry(vcpu, mmu_seq))
+		goto out_unlock;
 	kvm_mmu_free_some_pages(vcpu);
 	r = __direct_map(vcpu, gpa, error_code & PFERR_WRITE_MASK,
 			 largepage, gfn, pfn, kvm_x86_ops->get_tdp_level());
 	spin_unlock(&vcpu->kvm->mmu_lock);
 
 	return r;
+
+out_unlock:
+	spin_unlock(&vcpu->kvm->mmu_lock);
+	kvm_release_pfn_clean(pfn);
+	return 0;
 }
 
 static void nonpaging_free(struct kvm_vcpu *vcpu)
@@ -1670,6 +1768,8 @@ static void mmu_guess_page_from_pte_write(struct kvm_vcpu *vcpu, gpa_t gpa,
 		gfn &= ~(KVM_PAGES_PER_HPAGE-1);
 		vcpu->arch.update_pte.largepage = 1;
 	}
+	vcpu->arch.update_pte.mmu_seq = vcpu->kvm->mmu_notifier_seq;
+	/* implicit mb(), we'll read before PT lock is unlocked */
 	pfn = gfn_to_pfn(vcpu->kvm, gfn);
 	up_read(&current->mm->mmap_sem);
 
@@ -1814,6 +1914,7 @@ int kvm_mmu_unprotect_page_virt(struct kvm_vcpu *vcpu, gva_t gva)
 	spin_unlock(&vcpu->kvm->mmu_lock);
 	return r;
 }
+EXPORT_SYMBOL_GPL(kvm_mmu_unprotect_page_virt);
 
 void __kvm_mmu_free_some_pages(struct kvm_vcpu *vcpu)
 {
@@ -1870,6 +1971,12 @@ void kvm_enable_tdp(void)
 }
 EXPORT_SYMBOL_GPL(kvm_enable_tdp);
 
+void kvm_disable_tdp(void)
+{
+	tdp_enabled = false;
+}
+EXPORT_SYMBOL_GPL(kvm_disable_tdp);
+
 static void free_mmu_pages(struct kvm_vcpu *vcpu)
 {
 	struct kvm_mmu_page *sp;
diff --git a/arch/x86/kvm/paging_tmpl.h b/arch/x86/kvm/paging_tmpl.h
index 4d918220baeb..4a814bff21f2 100644
--- a/arch/x86/kvm/paging_tmpl.h
+++ b/arch/x86/kvm/paging_tmpl.h
@@ -263,6 +263,8 @@ static void FNAME(update_pte)(struct kvm_vcpu *vcpu, struct kvm_mmu_page *page,
 	pfn = vcpu->arch.update_pte.pfn;
 	if (is_error_pfn(pfn))
 		return;
+	if (mmu_notifier_retry(vcpu, vcpu->arch.update_pte.mmu_seq))
+		return;
 	kvm_get_pfn(pfn);
 	mmu_set_spte(vcpu, spte, page->role.access, pte_access, 0, 0,
 		     gpte & PT_DIRTY_MASK, NULL, largepage, gpte_to_gfn(gpte),
@@ -343,7 +345,7 @@ static u64 *FNAME(fetch)(struct kvm_vcpu *vcpu, gva_t addr,
 		shadow_addr = __pa(shadow_page->spt);
 		shadow_pte = shadow_addr | PT_PRESENT_MASK | PT_ACCESSED_MASK
 			| PT_WRITABLE_MASK | PT_USER_MASK;
-		*shadow_ent = shadow_pte;
+		set_shadow_pte(shadow_ent, shadow_pte);
 	}
 
 	mmu_set_spte(vcpu, shadow_ent, access, walker->pte_access & access,
@@ -380,6 +382,7 @@ static int FNAME(page_fault)(struct kvm_vcpu *vcpu, gva_t addr,
 	int r;
 	pfn_t pfn;
 	int largepage = 0;
+	unsigned long mmu_seq;
 
 	pgprintk("%s: addr %lx err %x\n", __func__, addr, error_code);
 	kvm_mmu_audit(vcpu, "pre page fault");
@@ -413,6 +416,8 @@ static int FNAME(page_fault)(struct kvm_vcpu *vcpu, gva_t addr,
 			largepage = 1;
 		}
 	}
+	mmu_seq = vcpu->kvm->mmu_notifier_seq;
+	/* implicit mb(), we'll read before PT lock is unlocked */
 	pfn = gfn_to_pfn(vcpu->kvm, walker.gfn);
 	up_read(&current->mm->mmap_sem);
 
@@ -424,6 +429,8 @@ static int FNAME(page_fault)(struct kvm_vcpu *vcpu, gva_t addr,
 	}
 
 	spin_lock(&vcpu->kvm->mmu_lock);
+	if (mmu_notifier_retry(vcpu, mmu_seq))
+		goto out_unlock;
 	kvm_mmu_free_some_pages(vcpu);
 	shadow_pte = FNAME(fetch)(vcpu, addr, &walker, user_fault, write_fault,
 				  largepage, &write_pt, pfn);
@@ -439,6 +446,11 @@ static int FNAME(page_fault)(struct kvm_vcpu *vcpu, gva_t addr,
 	spin_unlock(&vcpu->kvm->mmu_lock);
 
 	return write_pt;
+
+out_unlock:
+	spin_unlock(&vcpu->kvm->mmu_lock);
+	kvm_release_pfn_clean(pfn);
+	return 0;
 }
 
 static gpa_t FNAME(gva_to_gpa)(struct kvm_vcpu *vcpu, gva_t vaddr)
diff --git a/arch/x86/kvm/svm.c b/arch/x86/kvm/svm.c
index b756e876dce3..e2ee264740c7 100644
--- a/arch/x86/kvm/svm.c
+++ b/arch/x86/kvm/svm.c
@@ -453,7 +453,8 @@ static __init int svm_hardware_setup(void)
 	if (npt_enabled) {
 		printk(KERN_INFO "kvm: Nested Paging enabled\n");
 		kvm_enable_tdp();
-	}
+	} else
+		kvm_disable_tdp();
 
 	return 0;
 
@@ -1007,10 +1008,13 @@ static int pf_interception(struct vcpu_svm *svm, struct kvm_run *kvm_run)
 	struct kvm *kvm = svm->vcpu.kvm;
 	u64 fault_address;
 	u32 error_code;
+	bool event_injection = false;
 
 	if (!irqchip_in_kernel(kvm) &&
-		is_external_interrupt(exit_int_info))
+	    is_external_interrupt(exit_int_info)) {
+		event_injection = true;
 		push_irq(&svm->vcpu, exit_int_info & SVM_EVTINJ_VEC_MASK);
+	}
 
 	fault_address  = svm->vmcb->control.exit_info_2;
 	error_code = svm->vmcb->control.exit_info_1;
@@ -1024,6 +1028,8 @@ static int pf_interception(struct vcpu_svm *svm, struct kvm_run *kvm_run)
 			    (u32)fault_address, (u32)(fault_address >> 32),
 			    handler);
 
+	if (event_injection)
+		kvm_mmu_unprotect_page_virt(&svm->vcpu, fault_address);
 	return kvm_mmu_page_fault(&svm->vcpu, fault_address, error_code);
 }
 
diff --git a/arch/x86/kvm/vmx.c b/arch/x86/kvm/vmx.c
index 0cac63701719..2a69773e3b26 100644
--- a/arch/x86/kvm/vmx.c
+++ b/arch/x86/kvm/vmx.c
@@ -2298,6 +2298,8 @@ static int handle_exception(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run)
 		cr2 = vmcs_readl(EXIT_QUALIFICATION);
 		KVMTRACE_3D(PAGE_FAULT, vcpu, error_code, (u32)cr2,
 			    (u32)((u64)cr2 >> 32), handler);
+		if (vect_info & VECTORING_INFO_VALID_MASK)
+			kvm_mmu_unprotect_page_virt(vcpu, cr2);
 		return kvm_mmu_page_fault(vcpu, cr2, error_code);
 	}
 
@@ -3116,15 +3118,6 @@ static struct kvm_vcpu *vmx_create_vcpu(struct kvm *kvm, unsigned int id)
 		return ERR_PTR(-ENOMEM);
 
 	allocate_vpid(vmx);
-	if (id == 0 && vm_need_ept()) {
-		kvm_mmu_set_base_ptes(VMX_EPT_READABLE_MASK |
-			VMX_EPT_WRITABLE_MASK |
-			VMX_EPT_DEFAULT_MT << VMX_EPT_MT_EPTE_SHIFT);
-		kvm_mmu_set_mask_ptes(0ull, VMX_EPT_FAKE_ACCESSED_MASK,
-				VMX_EPT_FAKE_DIRTY_MASK, 0ull,
-				VMX_EPT_EXECUTABLE_MASK);
-		kvm_enable_tdp();
-	}
 
 	err = kvm_vcpu_init(&vmx->vcpu, kvm, id);
 	if (err)
@@ -3303,8 +3296,17 @@ static int __init vmx_init(void)
 	vmx_disable_intercept_for_msr(vmx_msr_bitmap, MSR_IA32_SYSENTER_ESP);
 	vmx_disable_intercept_for_msr(vmx_msr_bitmap, MSR_IA32_SYSENTER_EIP);
 
-	if (cpu_has_vmx_ept())
+	if (vm_need_ept()) {
 		bypass_guest_pf = 0;
+		kvm_mmu_set_base_ptes(VMX_EPT_READABLE_MASK |
+			VMX_EPT_WRITABLE_MASK |
+			VMX_EPT_DEFAULT_MT << VMX_EPT_MT_EPTE_SHIFT);
+		kvm_mmu_set_mask_ptes(0ull, VMX_EPT_FAKE_ACCESSED_MASK,
+				VMX_EPT_FAKE_DIRTY_MASK, 0ull,
+				VMX_EPT_EXECUTABLE_MASK);
+		kvm_enable_tdp();
+	} else
+		kvm_disable_tdp();
 
 	if (bypass_guest_pf)
 		kvm_mmu_set_nonpresent_ptes(~0xffeull, 0ull);
diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c
index 9f1cdb011cff..0d682fc6aeb3 100644
--- a/arch/x86/kvm/x86.c
+++ b/arch/x86/kvm/x86.c
@@ -883,6 +883,7 @@ int kvm_dev_ioctl_check_extension(long ext)
 	case KVM_CAP_PIT:
 	case KVM_CAP_NOP_IO_DELAY:
 	case KVM_CAP_MP_STATE:
+	case KVM_CAP_SYNC_MMU:
 		r = 1;
 		break;
 	case KVM_CAP_COALESCED_MMIO:
@@ -1495,6 +1496,7 @@ static int kvm_vm_ioctl_set_memory_alias(struct kvm *kvm,
 		goto out;
 
 	down_write(&kvm->slots_lock);
+	spin_lock(&kvm->mmu_lock);
 
 	p = &kvm->arch.aliases[alias->slot];
 	p->base_gfn = alias->guest_phys_addr >> PAGE_SHIFT;
@@ -1506,6 +1508,7 @@ static int kvm_vm_ioctl_set_memory_alias(struct kvm *kvm,
 			break;
 	kvm->arch.naliases = n;
 
+	spin_unlock(&kvm->mmu_lock);
 	kvm_mmu_zap_all(kvm);
 
 	up_write(&kvm->slots_lock);
@@ -3184,6 +3187,10 @@ static void seg_desct_to_kvm_desct(struct desc_struct *seg_desc, u16 selector,
 	kvm_desct->base |= seg_desc->base2 << 24;
 	kvm_desct->limit = seg_desc->limit0;
 	kvm_desct->limit |= seg_desc->limit << 16;
+	if (seg_desc->g) {
+		kvm_desct->limit <<= 12;
+		kvm_desct->limit |= 0xfff;
+	}
 	kvm_desct->selector = selector;
 	kvm_desct->type = seg_desc->type;
 	kvm_desct->present = seg_desc->p;
@@ -3223,6 +3230,7 @@ static void get_segment_descritptor_dtable(struct kvm_vcpu *vcpu,
 static int load_guest_segment_descriptor(struct kvm_vcpu *vcpu, u16 selector,
 					 struct desc_struct *seg_desc)
 {
+	gpa_t gpa;
 	struct descriptor_table dtable;
 	u16 index = selector >> 3;
 
@@ -3232,13 +3240,16 @@ static int load_guest_segment_descriptor(struct kvm_vcpu *vcpu, u16 selector,
 		kvm_queue_exception_e(vcpu, GP_VECTOR, selector & 0xfffc);
 		return 1;
 	}
-	return kvm_read_guest(vcpu->kvm, dtable.base + index * 8, seg_desc, 8);
+	gpa = vcpu->arch.mmu.gva_to_gpa(vcpu, dtable.base);
+	gpa += index * 8;
+	return kvm_read_guest(vcpu->kvm, gpa, seg_desc, 8);
 }
 
 /* allowed just for 8 bytes segments */
 static int save_guest_segment_descriptor(struct kvm_vcpu *vcpu, u16 selector,
 					 struct desc_struct *seg_desc)
 {
+	gpa_t gpa;
 	struct descriptor_table dtable;
 	u16 index = selector >> 3;
 
@@ -3246,7 +3257,9 @@ static int save_guest_segment_descriptor(struct kvm_vcpu *vcpu, u16 selector,
 
 	if (dtable.limit < index * 8 + 7)
 		return 1;
-	return kvm_write_guest(vcpu->kvm, dtable.base + index * 8, seg_desc, 8);
+	gpa = vcpu->arch.mmu.gva_to_gpa(vcpu, dtable.base);
+	gpa += index * 8;
+	return kvm_write_guest(vcpu->kvm, gpa, seg_desc, 8);
 }
 
 static u32 get_tss_base_addr(struct kvm_vcpu *vcpu,
@@ -3258,55 +3271,7 @@ static u32 get_tss_base_addr(struct kvm_vcpu *vcpu,
 	base_addr |= (seg_desc->base1 << 16);
 	base_addr |= (seg_desc->base2 << 24);
 
-	return base_addr;
-}
-
-static int load_tss_segment32(struct kvm_vcpu *vcpu,
-			      struct desc_struct *seg_desc,
-			      struct tss_segment_32 *tss)
-{
-	u32 base_addr;
-
-	base_addr = get_tss_base_addr(vcpu, seg_desc);
-
-	return kvm_read_guest(vcpu->kvm, base_addr, tss,
-			      sizeof(struct tss_segment_32));
-}
-
-static int save_tss_segment32(struct kvm_vcpu *vcpu,
-			      struct desc_struct *seg_desc,
-			      struct tss_segment_32 *tss)
-{
-	u32 base_addr;
-
-	base_addr = get_tss_base_addr(vcpu, seg_desc);
-
-	return kvm_write_guest(vcpu->kvm, base_addr, tss,
-			       sizeof(struct tss_segment_32));
-}
-
-static int load_tss_segment16(struct kvm_vcpu *vcpu,
-			      struct desc_struct *seg_desc,
-			      struct tss_segment_16 *tss)
-{
-	u32 base_addr;
-
-	base_addr = get_tss_base_addr(vcpu, seg_desc);
-
-	return kvm_read_guest(vcpu->kvm, base_addr, tss,
-			      sizeof(struct tss_segment_16));
-}
-
-static int save_tss_segment16(struct kvm_vcpu *vcpu,
-			      struct desc_struct *seg_desc,
-			      struct tss_segment_16 *tss)
-{
-	u32 base_addr;
-
-	base_addr = get_tss_base_addr(vcpu, seg_desc);
-
-	return kvm_write_guest(vcpu->kvm, base_addr, tss,
-			       sizeof(struct tss_segment_16));
+	return vcpu->arch.mmu.gva_to_gpa(vcpu, base_addr);
 }
 
 static u16 get_segment_selector(struct kvm_vcpu *vcpu, int seg)
@@ -3466,20 +3431,26 @@ static int load_state_from_tss16(struct kvm_vcpu *vcpu,
 }
 
 static int kvm_task_switch_16(struct kvm_vcpu *vcpu, u16 tss_selector,
-		       struct desc_struct *cseg_desc,
+		       u32 old_tss_base,
 		       struct desc_struct *nseg_desc)
 {
 	struct tss_segment_16 tss_segment_16;
 	int ret = 0;
 
-	if (load_tss_segment16(vcpu, cseg_desc, &tss_segment_16))
+	if (kvm_read_guest(vcpu->kvm, old_tss_base, &tss_segment_16,
+			   sizeof tss_segment_16))
 		goto out;
 
 	save_state_to_tss16(vcpu, &tss_segment_16);
-	save_tss_segment16(vcpu, cseg_desc, &tss_segment_16);
 
-	if (load_tss_segment16(vcpu, nseg_desc, &tss_segment_16))
+	if (kvm_write_guest(vcpu->kvm, old_tss_base, &tss_segment_16,
+			    sizeof tss_segment_16))
+		goto out;
+
+	if (kvm_read_guest(vcpu->kvm, get_tss_base_addr(vcpu, nseg_desc),
+			   &tss_segment_16, sizeof tss_segment_16))
 		goto out;
+
 	if (load_state_from_tss16(vcpu, &tss_segment_16))
 		goto out;
 
@@ -3489,20 +3460,26 @@ out:
 }
 
 static int kvm_task_switch_32(struct kvm_vcpu *vcpu, u16 tss_selector,
-		       struct desc_struct *cseg_desc,
+		       u32 old_tss_base,
 		       struct desc_struct *nseg_desc)
 {
 	struct tss_segment_32 tss_segment_32;
 	int ret = 0;
 
-	if (load_tss_segment32(vcpu, cseg_desc, &tss_segment_32))
+	if (kvm_read_guest(vcpu->kvm, old_tss_base, &tss_segment_32,
+			   sizeof tss_segment_32))
 		goto out;
 
 	save_state_to_tss32(vcpu, &tss_segment_32);
-	save_tss_segment32(vcpu, cseg_desc, &tss_segment_32);
 
-	if (load_tss_segment32(vcpu, nseg_desc, &tss_segment_32))
+	if (kvm_write_guest(vcpu->kvm, old_tss_base, &tss_segment_32,
+			    sizeof tss_segment_32))
 		goto out;
+
+	if (kvm_read_guest(vcpu->kvm, get_tss_base_addr(vcpu, nseg_desc),
+			   &tss_segment_32, sizeof tss_segment_32))
+		goto out;
+
 	if (load_state_from_tss32(vcpu, &tss_segment_32))
 		goto out;
 
@@ -3517,16 +3494,20 @@ int kvm_task_switch(struct kvm_vcpu *vcpu, u16 tss_selector, int reason)
 	struct desc_struct cseg_desc;
 	struct desc_struct nseg_desc;
 	int ret = 0;
+	u32 old_tss_base = get_segment_base(vcpu, VCPU_SREG_TR);
+	u16 old_tss_sel = get_segment_selector(vcpu, VCPU_SREG_TR);
 
-	kvm_get_segment(vcpu, &tr_seg, VCPU_SREG_TR);
+	old_tss_base = vcpu->arch.mmu.gva_to_gpa(vcpu, old_tss_base);
 
+	/* FIXME: Handle errors. Failure to read either TSS or their
+	 * descriptors should generate a pagefault.
+	 */
 	if (load_guest_segment_descriptor(vcpu, tss_selector, &nseg_desc))
 		goto out;
 
-	if (load_guest_segment_descriptor(vcpu, tr_seg.selector, &cseg_desc))
+	if (load_guest_segment_descriptor(vcpu, old_tss_sel, &cseg_desc))
 		goto out;
 
-
 	if (reason != TASK_SWITCH_IRET) {
 		int cpl;
 
@@ -3544,8 +3525,7 @@ int kvm_task_switch(struct kvm_vcpu *vcpu, u16 tss_selector, int reason)
 
 	if (reason == TASK_SWITCH_IRET || reason == TASK_SWITCH_JMP) {
 		cseg_desc.type &= ~(1 << 1); //clear the B flag
-		save_guest_segment_descriptor(vcpu, tr_seg.selector,
-					      &cseg_desc);
+		save_guest_segment_descriptor(vcpu, old_tss_sel, &cseg_desc);
 	}
 
 	if (reason == TASK_SWITCH_IRET) {
@@ -3557,10 +3537,10 @@ int kvm_task_switch(struct kvm_vcpu *vcpu, u16 tss_selector, int reason)
 	kvm_x86_ops->cache_regs(vcpu);
 
 	if (nseg_desc.type & 8)
-		ret = kvm_task_switch_32(vcpu, tss_selector, &cseg_desc,
+		ret = kvm_task_switch_32(vcpu, tss_selector, old_tss_base,
 					 &nseg_desc);
 	else
-		ret = kvm_task_switch_16(vcpu, tss_selector, &cseg_desc,
+		ret = kvm_task_switch_16(vcpu, tss_selector, old_tss_base,
 					 &nseg_desc);
 
 	if (reason == TASK_SWITCH_CALL || reason == TASK_SWITCH_GATE) {
@@ -3995,16 +3975,23 @@ int kvm_arch_set_memory_region(struct kvm *kvm,
 	 */
 	if (!user_alloc) {
 		if (npages && !old.rmap) {
+			unsigned long userspace_addr;
+
 			down_write(&current->mm->mmap_sem);
-			memslot->userspace_addr = do_mmap(NULL, 0,
-						     npages * PAGE_SIZE,
-						     PROT_READ | PROT_WRITE,
-						     MAP_SHARED | MAP_ANONYMOUS,
-						     0);
+			userspace_addr = do_mmap(NULL, 0,
+						 npages * PAGE_SIZE,
+						 PROT_READ | PROT_WRITE,
+						 MAP_SHARED | MAP_ANONYMOUS,
+						 0);
 			up_write(&current->mm->mmap_sem);
 
-			if (IS_ERR((void *)memslot->userspace_addr))
-				return PTR_ERR((void *)memslot->userspace_addr);
+			if (IS_ERR((void *)userspace_addr))
+				return PTR_ERR((void *)userspace_addr);
+
+			/* set userspace_addr atomically for kvm_hva_to_rmapp */
+			spin_lock(&kvm->mmu_lock);
+			memslot->userspace_addr = userspace_addr;
+			spin_unlock(&kvm->mmu_lock);
 		} else {
 			if (!old.user_alloc && old.rmap) {
 				int ret;
diff --git a/arch/x86/lguest/boot.c b/arch/x86/lguest/boot.c
index 0313a5eec412..65f0b8a47bed 100644
--- a/arch/x86/lguest/boot.c
+++ b/arch/x86/lguest/boot.c
@@ -55,6 +55,7 @@
 #include <linux/lguest_launcher.h>
 #include <linux/virtio_console.h>
 #include <linux/pm.h>
+#include <asm/apic.h>
 #include <asm/lguest.h>
 #include <asm/paravirt.h>
 #include <asm/param.h>
@@ -783,14 +784,44 @@ static void lguest_wbinvd(void)
  * code qualifies for Advanced.  It will also never interrupt anything.  It
  * does, however, allow us to get through the Linux boot code. */
 #ifdef CONFIG_X86_LOCAL_APIC
-static void lguest_apic_write(unsigned long reg, u32 v)
+static void lguest_apic_write(u32 reg, u32 v)
 {
 }
 
-static u32 lguest_apic_read(unsigned long reg)
+static u32 lguest_apic_read(u32 reg)
 {
 	return 0;
 }
+
+static u64 lguest_apic_icr_read(void)
+{
+	return 0;
+}
+
+static void lguest_apic_icr_write(u32 low, u32 id)
+{
+	/* Warn to see if there's any stray references */
+	WARN_ON(1);
+}
+
+static void lguest_apic_wait_icr_idle(void)
+{
+	return;
+}
+
+static u32 lguest_apic_safe_wait_icr_idle(void)
+{
+	return 0;
+}
+
+static struct apic_ops lguest_basic_apic_ops = {
+	.read = lguest_apic_read,
+	.write = lguest_apic_write,
+	.icr_read = lguest_apic_icr_read,
+	.icr_write = lguest_apic_icr_write,
+	.wait_icr_idle = lguest_apic_wait_icr_idle,
+	.safe_wait_icr_idle = lguest_apic_safe_wait_icr_idle,
+};
 #endif
 
 /* STOP!  Until an interrupt comes in. */
@@ -990,8 +1021,7 @@ __init void lguest_init(void)
 
 #ifdef CONFIG_X86_LOCAL_APIC
 	/* apic read/write intercepts */
-	pv_apic_ops.apic_write = lguest_apic_write;
-	pv_apic_ops.apic_read = lguest_apic_read;
+	apic_ops = &lguest_basic_apic_ops;
 #endif
 
 	/* time operations */
@@ -1014,6 +1044,9 @@ __init void lguest_init(void)
 	init_pg_tables_start = __pa(pg0);
 	init_pg_tables_end = __pa(pg0);
 
+	/* As described in head_32.S, we map the first 128M of memory. */
+	max_pfn_mapped = (128*1024*1024) >> PAGE_SHIFT;
+
 	/* Load the %fs segment register (the per-cpu segment register) with
 	 * the normal data segment to get through booting. */
 	asm volatile ("mov %0, %%fs" : : "r" (__KERNEL_DS) : "memory");
diff --git a/arch/x86/lib/Makefile b/arch/x86/lib/Makefile
index aa3fa4119424..55e11aa6d66c 100644
--- a/arch/x86/lib/Makefile
+++ b/arch/x86/lib/Makefile
@@ -17,9 +17,6 @@ ifeq ($(CONFIG_X86_32),y)
         lib-$(CONFIG_X86_USE_3DNOW) += mmx_32.o
 else
         obj-y += io_64.o iomap_copy_64.o
-
-        CFLAGS_csum-partial_64.o := -funroll-loops
-
         lib-y += csum-partial_64.o csum-copy_64.o csum-wrappers_64.o
         lib-y += thunk_64.o clear_page_64.o copy_page_64.o
         lib-y += memmove_64.o memset_64.o
diff --git a/arch/x86/lib/copy_user_64.S b/arch/x86/lib/copy_user_64.S
index dfdf428975c0..f118c110af32 100644
--- a/arch/x86/lib/copy_user_64.S
+++ b/arch/x86/lib/copy_user_64.S
@@ -52,7 +52,7 @@
 	jnz 100b
 102:
 	.section .fixup,"ax"
-103:	addl %r8d,%edx			/* ecx is zerorest also */
+103:	addl %ecx,%edx			/* ecx is zerorest also */
 	jmp copy_user_handle_tail
 	.previous
 
diff --git a/arch/x86/lib/copy_user_nocache_64.S b/arch/x86/lib/copy_user_nocache_64.S
index 40e0e309d27e..cb0c112386fb 100644
--- a/arch/x86/lib/copy_user_nocache_64.S
+++ b/arch/x86/lib/copy_user_nocache_64.S
@@ -32,7 +32,7 @@
 	jnz 100b
 102:
 	.section .fixup,"ax"
-103:	addl %r8d,%edx			/* ecx is zerorest also */
+103:	addl %ecx,%edx			/* ecx is zerorest also */
 	jmp copy_user_handle_tail
 	.previous
 
@@ -108,7 +108,6 @@ ENTRY(__copy_user_nocache)
 	jmp 60f
 50:	movl %ecx,%edx
 60:	sfence
-	movl %r8d,%ecx
 	jmp copy_user_handle_tail
 	.previous
 
diff --git a/arch/x86/lib/msr-on-cpu.c b/arch/x86/lib/msr-on-cpu.c
index d5a2b39f882b..01b868ba82f8 100644
--- a/arch/x86/lib/msr-on-cpu.c
+++ b/arch/x86/lib/msr-on-cpu.c
@@ -30,10 +30,11 @@ static int _rdmsr_on_cpu(unsigned int cpu, u32 msr_no, u32 *l, u32 *h, int safe)
 
 	rv.msr_no = msr_no;
 	if (safe) {
-		smp_call_function_single(cpu, __rdmsr_safe_on_cpu, &rv, 1);
-		err = rv.err;
+		err = smp_call_function_single(cpu, __rdmsr_safe_on_cpu,
+					       &rv, 1);
+		err = err ? err : rv.err;
 	} else {
-		smp_call_function_single(cpu, __rdmsr_on_cpu, &rv, 1);
+		err = smp_call_function_single(cpu, __rdmsr_on_cpu, &rv, 1);
 	}
 	*l = rv.l;
 	*h = rv.h;
@@ -64,23 +65,24 @@ static int _wrmsr_on_cpu(unsigned int cpu, u32 msr_no, u32 l, u32 h, int safe)
 	rv.l = l;
 	rv.h = h;
 	if (safe) {
-		smp_call_function_single(cpu, __wrmsr_safe_on_cpu, &rv, 1);
-		err = rv.err;
+		err = smp_call_function_single(cpu, __wrmsr_safe_on_cpu,
+					       &rv, 1);
+		err = err ? err : rv.err;
 	} else {
-		smp_call_function_single(cpu, __wrmsr_on_cpu, &rv, 1);
+		err = smp_call_function_single(cpu, __wrmsr_on_cpu, &rv, 1);
 	}
 
 	return err;
 }
 
-void wrmsr_on_cpu(unsigned int cpu, u32 msr_no, u32 l, u32 h)
+int wrmsr_on_cpu(unsigned int cpu, u32 msr_no, u32 l, u32 h)
 {
-	_wrmsr_on_cpu(cpu, msr_no, l, h, 0);
+	return _wrmsr_on_cpu(cpu, msr_no, l, h, 0);
 }
 
-void rdmsr_on_cpu(unsigned int cpu, u32 msr_no, u32 *l, u32 *h)
+int rdmsr_on_cpu(unsigned int cpu, u32 msr_no, u32 *l, u32 *h)
 {
-	_rdmsr_on_cpu(cpu, msr_no, l, h, 0);
+	return _rdmsr_on_cpu(cpu, msr_no, l, h, 0);
 }
 
 /* These "safe" variants are slower and should be used when the target MSR
diff --git a/arch/x86/lib/usercopy_32.c b/arch/x86/lib/usercopy_32.c
index 24e60944971a..9e68075544f6 100644
--- a/arch/x86/lib/usercopy_32.c
+++ b/arch/x86/lib/usercopy_32.c
@@ -14,6 +14,13 @@
 #include <asm/uaccess.h>
 #include <asm/mmx.h>
 
+#ifdef CONFIG_X86_INTEL_USERCOPY
+/*
+ * Alignment at which movsl is preferred for bulk memory copies.
+ */
+struct movsl_mask movsl_mask __read_mostly;
+#endif
+
 static inline int __movsl_is_ok(unsigned long a1, unsigned long a2, unsigned long n)
 {
 #ifdef CONFIG_X86_INTEL_USERCOPY
diff --git a/arch/x86/mach-default/setup.c b/arch/x86/mach-default/setup.c
index 3d317836be9e..37b9ae4d44c5 100644
--- a/arch/x86/mach-default/setup.c
+++ b/arch/x86/mach-default/setup.c
@@ -10,13 +10,15 @@
 #include <asm/e820.h>
 #include <asm/setup.h>
 
+#include <mach_ipi.h>
+
 #ifdef CONFIG_HOTPLUG_CPU
 #define DEFAULT_SEND_IPI	(1)
 #else
 #define DEFAULT_SEND_IPI	(0)
 #endif
 
-int no_broadcast=DEFAULT_SEND_IPI;
+int no_broadcast = DEFAULT_SEND_IPI;
 
 /**
  * pre_intr_init_hook - initialisation prior to setting up interrupt vectors
@@ -36,15 +38,6 @@ void __init pre_intr_init_hook(void)
 	init_ISA_irqs();
 }
 
-/*
- * IRQ2 is cascade interrupt to second interrupt controller
- */
-static struct irqaction irq2 = {
-	.handler = no_action,
-	.mask = CPU_MASK_NONE,
-	.name = "cascade",
-};
-
 /**
  * intr_init_hook - post gate setup interrupt initialisation
  *
@@ -60,12 +53,6 @@ void __init intr_init_hook(void)
 		if (x86_quirks->arch_intr_init())
 			return;
 	}
-#ifdef CONFIG_X86_LOCAL_APIC
-	apic_intr_init();
-#endif
-
-	if (!acpi_ioapic)
-		setup_irq(2, &irq2);
 }
 
 /**
diff --git a/arch/x86/mach-es7000/Makefile b/arch/x86/mach-es7000/Makefile
deleted file mode 100644
index 3ef8b43b62fc..000000000000
--- a/arch/x86/mach-es7000/Makefile
+++ /dev/null
@@ -1,5 +0,0 @@
-#
-# Makefile for the linux kernel.
-#
-
-obj-$(CONFIG_X86_ES7000)	:= es7000plat.o
diff --git a/arch/x86/mach-es7000/es7000.h b/arch/x86/mach-es7000/es7000.h
deleted file mode 100644
index c8d5aa132fa0..000000000000
--- a/arch/x86/mach-es7000/es7000.h
+++ /dev/null
@@ -1,114 +0,0 @@
-/*
- * Written by: Garry Forsgren, Unisys Corporation
- *             Natalie Protasevich, Unisys Corporation
- * This file contains the code to configure and interface 
- * with Unisys ES7000 series hardware system manager.
- *
- * Copyright (c) 2003 Unisys Corporation.  All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of version 2 of the GNU General Public License as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it would be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write the Free Software Foundation, Inc., 59
- * Temple Place - Suite 330, Boston MA 02111-1307, USA.
- *
- * Contact information: Unisys Corporation, Township Line & Union Meeting 
- * Roads-A, Unisys Way, Blue Bell, Pennsylvania, 19424, or:
- *
- * http://www.unisys.com
- */
-
-/*
- * ES7000 chipsets
- */
-
-#define NON_UNISYS		0
-#define ES7000_CLASSIC		1
-#define ES7000_ZORRO		2
-
-
-#define	MIP_REG			1
-#define	MIP_PSAI_REG		4
-
-#define	MIP_BUSY		1
-#define	MIP_SPIN		0xf0000
-#define	MIP_VALID		0x0100000000000000ULL
-#define	MIP_PORT(VALUE)	((VALUE >> 32) & 0xffff)
-
-#define	MIP_RD_LO(VALUE)	(VALUE & 0xffffffff)   
-
-struct mip_reg_info {
-	unsigned long long mip_info;
-	unsigned long long delivery_info;
-	unsigned long long host_reg;
-	unsigned long long mip_reg;
-};
-
-struct part_info {
-	unsigned char type;   
-	unsigned char length;
-	unsigned char part_id;
-	unsigned char apic_mode;
-	unsigned long snum;    
-	char ptype[16];
-	char sname[64];
-	char pname[64];
-};
-
-struct psai {
-	unsigned long long entry_type;
-	unsigned long long addr;
-	unsigned long long bep_addr;
-};
-
-struct es7000_mem_info {
-	unsigned char type;   
-	unsigned char length;
-	unsigned char resv[6];
-	unsigned long long  start; 
-	unsigned long long  size; 
-};
-
-struct es7000_oem_table {
-	unsigned long long hdr;
-	struct mip_reg_info mip;
-	struct part_info pif;
-	struct es7000_mem_info shm;
-	struct psai psai;
-};
-
-#ifdef CONFIG_ACPI
-
-struct oem_table {
-	struct acpi_table_header Header;
-	u32 OEMTableAddr;
-	u32 OEMTableSize;
-};
-
-extern int find_unisys_acpi_oem_table(unsigned long *oem_addr);
-#endif
-
-struct mip_reg {
-	unsigned long long off_0;
-	unsigned long long off_8;
-	unsigned long long off_10;
-	unsigned long long off_18;
-	unsigned long long off_20;
-	unsigned long long off_28;
-	unsigned long long off_30;
-	unsigned long long off_38;
-};
-
-#define	MIP_SW_APIC		0x1020b
-#define	MIP_FUNC(VALUE) 	(VALUE & 0xff)
-
-extern int parse_unisys_oem (char *oemptr);
-extern void setup_unisys(void);
-extern int es7000_start_cpu(int cpu, unsigned long eip);
-extern void es7000_sw_apic(void);
diff --git a/arch/x86/mach-es7000/es7000plat.c b/arch/x86/mach-es7000/es7000plat.c
deleted file mode 100644
index 50189af14b85..000000000000
--- a/arch/x86/mach-es7000/es7000plat.c
+++ /dev/null
@@ -1,262 +0,0 @@
-/*
- * Written by: Garry Forsgren, Unisys Corporation
- *             Natalie Protasevich, Unisys Corporation
- * This file contains the code to configure and interface
- * with Unisys ES7000 series hardware system manager.
- *
- * Copyright (c) 2003 Unisys Corporation.  All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of version 2 of the GNU General Public License as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it would be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write the Free Software Foundation, Inc., 59
- * Temple Place - Suite 330, Boston MA 02111-1307, USA.
- *
- * Contact information: Unisys Corporation, Township Line & Union Meeting
- * Roads-A, Unisys Way, Blue Bell, Pennsylvania, 19424, or:
- *
- * http://www.unisys.com
- */
-
-#include <linux/module.h>
-#include <linux/types.h>
-#include <linux/kernel.h>
-#include <linux/smp.h>
-#include <linux/string.h>
-#include <linux/spinlock.h>
-#include <linux/errno.h>
-#include <linux/notifier.h>
-#include <linux/reboot.h>
-#include <linux/init.h>
-#include <linux/acpi.h>
-#include <asm/io.h>
-#include <asm/nmi.h>
-#include <asm/smp.h>
-#include <asm/apicdef.h>
-#include "es7000.h"
-#include <mach_mpparse.h>
-
-/*
- * ES7000 Globals
- */
-
-static volatile unsigned long	*psai = NULL;
-static struct mip_reg		*mip_reg;
-static struct mip_reg		*host_reg;
-static int 			mip_port;
-static unsigned long		mip_addr, host_addr;
-
-int es7000_plat;
-
-/*
- * GSI override for ES7000 platforms.
- */
-
-static unsigned int base;
-
-static int
-es7000_rename_gsi(int ioapic, int gsi)
-{
-	if (es7000_plat == ES7000_ZORRO)
-		return gsi;
-
-	if (!base) {
-		int i;
-		for (i = 0; i < nr_ioapics; i++)
-			base += nr_ioapic_registers[i];
-	}
-
-	if (!ioapic && (gsi < 16)) 
-		gsi += base;
-	return gsi;
-}
-
-void __init
-setup_unisys(void)
-{
-	/*
-	 * Determine the generation of the ES7000 currently running.
-	 *
-	 * es7000_plat = 1 if the machine is a 5xx ES7000 box
-	 * es7000_plat = 2 if the machine is a x86_64 ES7000 box
-	 *
-	 */
-	if (!(boot_cpu_data.x86 <= 15 && boot_cpu_data.x86_model <= 2))
-		es7000_plat = ES7000_ZORRO;
-	else
-		es7000_plat = ES7000_CLASSIC;
-	ioapic_renumber_irq = es7000_rename_gsi;
-}
-
-/*
- * Parse the OEM Table
- */
-
-int __init
-parse_unisys_oem (char *oemptr)
-{
-	int                     i;
-	int 			success = 0;
-	unsigned char           type, size;
-	unsigned long           val;
-	char                    *tp = NULL;
-	struct psai             *psaip = NULL;
-	struct mip_reg_info 	*mi;
-	struct mip_reg		*host, *mip;
-
-	tp = oemptr;
-
-	tp += 8;
-
-	for (i=0; i <= 6; i++) {
-		type = *tp++;
-		size = *tp++;
-		tp -= 2;
-		switch (type) {
-		case MIP_REG:
-			mi = (struct mip_reg_info *)tp;
-			val = MIP_RD_LO(mi->host_reg);
-			host_addr = val;
-			host = (struct mip_reg *)val;
-			host_reg = __va(host);
-			val = MIP_RD_LO(mi->mip_reg);
-			mip_port = MIP_PORT(mi->mip_info);
-			mip_addr = val;
-			mip = (struct mip_reg *)val;
-			mip_reg = __va(mip);
-			pr_debug("es7000_mipcfg: host_reg = 0x%lx \n",
-				 (unsigned long)host_reg);
-			pr_debug("es7000_mipcfg: mip_reg = 0x%lx \n",
-				 (unsigned long)mip_reg);
-			success++;
-			break;
-		case MIP_PSAI_REG:
-			psaip = (struct psai *)tp;
-			if (tp != NULL) {
-				if (psaip->addr)
-					psai = __va(psaip->addr);
-				else
-					psai = NULL;
-				success++;
-			}
-			break;
-		default:
-			break;
-		}
-		tp += size;
-	}
-
-	if (success < 2) {
-		es7000_plat = NON_UNISYS;
-	} else
-		setup_unisys();
-	return es7000_plat;
-}
-
-#ifdef CONFIG_ACPI
-int __init
-find_unisys_acpi_oem_table(unsigned long *oem_addr)
-{
-	struct acpi_table_header *header = NULL;
-	int i = 0;
-	while (ACPI_SUCCESS(acpi_get_table("OEM1", i++, &header))) {
-		if (!memcmp((char *) &header->oem_id, "UNISYS", 6)) {
-			struct oem_table *t = (struct oem_table *)header;
-			*oem_addr = (unsigned long)__acpi_map_table(t->OEMTableAddr,
-								    t->OEMTableSize);
-			return 0;
-		}
-	}
-	return -1;
-}
-#endif
-
-static void
-es7000_spin(int n)
-{
-	int i = 0;
-
-	while (i++ < n)
-		rep_nop();
-}
-
-static int __init
-es7000_mip_write(struct mip_reg *mip_reg)
-{
-	int			status = 0;
-	int			spin;
-
-	spin = MIP_SPIN;
-	while (((unsigned long long)host_reg->off_38 &
-		(unsigned long long)MIP_VALID) != 0) {
-			if (--spin <= 0) {
-				printk("es7000_mip_write: Timeout waiting for Host Valid Flag");
-				return -1;
-			}
-		es7000_spin(MIP_SPIN);
-	}
-
-	memcpy(host_reg, mip_reg, sizeof(struct mip_reg));
-	outb(1, mip_port);
-
-	spin = MIP_SPIN;
-
-	while (((unsigned long long)mip_reg->off_38 &
-		(unsigned long long)MIP_VALID) == 0) {
-		if (--spin <= 0) {
-			printk("es7000_mip_write: Timeout waiting for MIP Valid Flag");
-			return -1;
-		}
-		es7000_spin(MIP_SPIN);
-	}
-
-	status = ((unsigned long long)mip_reg->off_0 &
-		(unsigned long long)0xffff0000000000ULL) >> 48;
-	mip_reg->off_38 = ((unsigned long long)mip_reg->off_38 &
-		(unsigned long long)~MIP_VALID);
-	return status;
-}
-
-int
-es7000_start_cpu(int cpu, unsigned long eip)
-{
-	unsigned long vect = 0, psaival = 0;
-
-	if (psai == NULL)
-		return -1;
-
-	vect = ((unsigned long)__pa(eip)/0x1000) << 16;
-	psaival = (0x1000000 | vect | cpu);
-
-	while (*psai & 0x1000000)
-                ;
-
-	*psai = psaival;
-
-	return 0;
-
-}
-
-void __init
-es7000_sw_apic(void)
-{
-	if (es7000_plat) {
-		int mip_status;
-		struct mip_reg es7000_mip_reg;
-
-		printk("ES7000: Enabling APIC mode.\n");
-        	memset(&es7000_mip_reg, 0, sizeof(struct mip_reg));
-        	es7000_mip_reg.off_0 = MIP_SW_APIC;
-        	es7000_mip_reg.off_38 = (MIP_VALID);
-        	while ((mip_status = es7000_mip_write(&es7000_mip_reg)) != 0)
-              		printk("es7000_sw_apic: command failed, status = %x\n",
-				mip_status);
-		return;
-	}
-}
diff --git a/arch/x86/mach-generic/Makefile b/arch/x86/mach-generic/Makefile
index 0dbd7803a1d5..6730f4e7c744 100644
--- a/arch/x86/mach-generic/Makefile
+++ b/arch/x86/mach-generic/Makefile
@@ -9,4 +9,3 @@ obj-$(CONFIG_X86_NUMAQ)		+= numaq.o
 obj-$(CONFIG_X86_SUMMIT)	+= summit.o
 obj-$(CONFIG_X86_BIGSMP)	+= bigsmp.o
 obj-$(CONFIG_X86_ES7000)	+= es7000.o
-obj-$(CONFIG_X86_ES7000)	+= ../../x86/mach-es7000/
diff --git a/arch/x86/mach-generic/bigsmp.c b/arch/x86/mach-generic/bigsmp.c
index 59d771714559..df37fc9d6a26 100644
--- a/arch/x86/mach-generic/bigsmp.c
+++ b/arch/x86/mach-generic/bigsmp.c
@@ -5,18 +5,17 @@
 #define APIC_DEFINITION 1
 #include <linux/threads.h>
 #include <linux/cpumask.h>
-#include <asm/smp.h>
 #include <asm/mpspec.h>
 #include <asm/genapic.h>
 #include <asm/fixmap.h>
 #include <asm/apicdef.h>
 #include <linux/kernel.h>
-#include <linux/smp.h>
 #include <linux/init.h>
 #include <linux/dmi.h>
-#include <asm/mach-bigsmp/mach_apic.h>
-#include <asm/mach-bigsmp/mach_apicdef.h>
-#include <asm/mach-bigsmp/mach_ipi.h>
+#include <asm/bigsmp/apicdef.h>
+#include <linux/smp.h>
+#include <asm/bigsmp/apic.h>
+#include <asm/bigsmp/ipi.h>
 #include <asm/mach-default/mach_mpparse.h>
 
 static int dmi_bigsmp; /* can be set by dmi scanners */
diff --git a/arch/x86/mach-generic/es7000.c b/arch/x86/mach-generic/es7000.c
index 4742626f08c4..520cca0ee04e 100644
--- a/arch/x86/mach-generic/es7000.c
+++ b/arch/x86/mach-generic/es7000.c
@@ -4,20 +4,19 @@
 #define APIC_DEFINITION 1
 #include <linux/threads.h>
 #include <linux/cpumask.h>
-#include <asm/smp.h>
 #include <asm/mpspec.h>
 #include <asm/genapic.h>
 #include <asm/fixmap.h>
 #include <asm/apicdef.h>
 #include <linux/kernel.h>
 #include <linux/string.h>
-#include <linux/smp.h>
 #include <linux/init.h>
-#include <asm/mach-es7000/mach_apicdef.h>
-#include <asm/mach-es7000/mach_apic.h>
-#include <asm/mach-es7000/mach_ipi.h>
-#include <asm/mach-es7000/mach_mpparse.h>
-#include <asm/mach-es7000/mach_wakecpu.h>
+#include <asm/es7000/apicdef.h>
+#include <linux/smp.h>
+#include <asm/es7000/apic.h>
+#include <asm/es7000/ipi.h>
+#include <asm/es7000/mpparse.h>
+#include <asm/es7000/wakecpu.h>
 
 static int probe_es7000(void)
 {
diff --git a/arch/x86/mach-generic/numaq.c b/arch/x86/mach-generic/numaq.c
index 8091e68764c4..8cf58394975e 100644
--- a/arch/x86/mach-generic/numaq.c
+++ b/arch/x86/mach-generic/numaq.c
@@ -4,7 +4,6 @@
 #define APIC_DEFINITION 1
 #include <linux/threads.h>
 #include <linux/cpumask.h>
-#include <linux/smp.h>
 #include <asm/mpspec.h>
 #include <asm/genapic.h>
 #include <asm/fixmap.h>
@@ -12,11 +11,12 @@
 #include <linux/kernel.h>
 #include <linux/string.h>
 #include <linux/init.h>
-#include <asm/mach-numaq/mach_apic.h>
-#include <asm/mach-numaq/mach_apicdef.h>
-#include <asm/mach-numaq/mach_ipi.h>
-#include <asm/mach-numaq/mach_mpparse.h>
-#include <asm/mach-numaq/mach_wakecpu.h>
+#include <asm/numaq/apicdef.h>
+#include <linux/smp.h>
+#include <asm/numaq/apic.h>
+#include <asm/numaq/ipi.h>
+#include <asm/numaq/mpparse.h>
+#include <asm/numaq/wakecpu.h>
 #include <asm/numaq.h>
 
 static int mps_oem_check(struct mp_config_table *mpc, char *oem,
diff --git a/arch/x86/mach-generic/summit.c b/arch/x86/mach-generic/summit.c
index a97ea0f35b1e..6ad6b67a723d 100644
--- a/arch/x86/mach-generic/summit.c
+++ b/arch/x86/mach-generic/summit.c
@@ -4,19 +4,18 @@
 #define APIC_DEFINITION 1
 #include <linux/threads.h>
 #include <linux/cpumask.h>
-#include <asm/smp.h>
 #include <asm/mpspec.h>
 #include <asm/genapic.h>
 #include <asm/fixmap.h>
 #include <asm/apicdef.h>
 #include <linux/kernel.h>
 #include <linux/string.h>
-#include <linux/smp.h>
 #include <linux/init.h>
-#include <asm/mach-summit/mach_apic.h>
-#include <asm/mach-summit/mach_apicdef.h>
-#include <asm/mach-summit/mach_ipi.h>
-#include <asm/mach-summit/mach_mpparse.h>
+#include <asm/summit/apicdef.h>
+#include <linux/smp.h>
+#include <asm/summit/apic.h>
+#include <asm/summit/ipi.h>
+#include <asm/summit/mpparse.h>
 
 static int probe_summit(void)
 {
diff --git a/arch/x86/mach-rdc321x/platform.c b/arch/x86/mach-rdc321x/platform.c
index a037041817c7..4f4e50c3ad3b 100644
--- a/arch/x86/mach-rdc321x/platform.c
+++ b/arch/x86/mach-rdc321x/platform.c
@@ -25,7 +25,6 @@
 #include <linux/list.h>
 #include <linux/device.h>
 #include <linux/platform_device.h>
-#include <linux/version.h>
 #include <linux/leds.h>
 
 #include <asm/gpio.h>
diff --git a/arch/x86/mm/Makefile b/arch/x86/mm/Makefile
index 1fbb844c3d7a..dfb932dcf136 100644
--- a/arch/x86/mm/Makefile
+++ b/arch/x86/mm/Makefile
@@ -1,5 +1,5 @@
 obj-y	:=  init_$(BITS).o fault.o ioremap.o extable.o pageattr.o mmap.o \
-	    pat.o pgtable.o
+	    pat.o pgtable.o gup.o
 
 obj-$(CONFIG_X86_32)		+= pgtable_32.o
 
diff --git a/arch/x86/mm/fault.c b/arch/x86/mm/fault.c
index 455f3fe67b42..8f92cac4e6db 100644
--- a/arch/x86/mm/fault.c
+++ b/arch/x86/mm/fault.c
@@ -35,6 +35,7 @@
 #include <asm/tlbflush.h>
 #include <asm/proto.h>
 #include <asm-generic/sections.h>
+#include <asm/traps.h>
 
 /*
  * Page fault error code bits
@@ -357,8 +358,6 @@ static int is_errata100(struct pt_regs *regs, unsigned long address)
 	return 0;
 }
 
-void do_invalid_op(struct pt_regs *, unsigned long);
-
 static int is_f00f_bug(struct pt_regs *regs, unsigned long address)
 {
 #ifdef CONFIG_X86_F00F_BUG
diff --git a/arch/x86/mm/gup.c b/arch/x86/mm/gup.c
new file mode 100644
index 000000000000..007bb06c7504
--- /dev/null
+++ b/arch/x86/mm/gup.c
@@ -0,0 +1,298 @@
+/*
+ * Lockless get_user_pages_fast for x86
+ *
+ * Copyright (C) 2008 Nick Piggin
+ * Copyright (C) 2008 Novell Inc.
+ */
+#include <linux/sched.h>
+#include <linux/mm.h>
+#include <linux/vmstat.h>
+#include <linux/highmem.h>
+
+#include <asm/pgtable.h>
+
+static inline pte_t gup_get_pte(pte_t *ptep)
+{
+#ifndef CONFIG_X86_PAE
+	return *ptep;
+#else
+	/*
+	 * With get_user_pages_fast, we walk down the pagetables without taking
+	 * any locks.  For this we would like to load the pointers atoimcally,
+	 * but that is not possible (without expensive cmpxchg8b) on PAE.  What
+	 * we do have is the guarantee that a pte will only either go from not
+	 * present to present, or present to not present or both -- it will not
+	 * switch to a completely different present page without a TLB flush in
+	 * between; something that we are blocking by holding interrupts off.
+	 *
+	 * Setting ptes from not present to present goes:
+	 * ptep->pte_high = h;
+	 * smp_wmb();
+	 * ptep->pte_low = l;
+	 *
+	 * And present to not present goes:
+	 * ptep->pte_low = 0;
+	 * smp_wmb();
+	 * ptep->pte_high = 0;
+	 *
+	 * We must ensure here that the load of pte_low sees l iff pte_high
+	 * sees h. We load pte_high *after* loading pte_low, which ensures we
+	 * don't see an older value of pte_high.  *Then* we recheck pte_low,
+	 * which ensures that we haven't picked up a changed pte high. We might
+	 * have got rubbish values from pte_low and pte_high, but we are
+	 * guaranteed that pte_low will not have the present bit set *unless*
+	 * it is 'l'. And get_user_pages_fast only operates on present ptes, so
+	 * we're safe.
+	 *
+	 * gup_get_pte should not be used or copied outside gup.c without being
+	 * very careful -- it does not atomically load the pte or anything that
+	 * is likely to be useful for you.
+	 */
+	pte_t pte;
+
+retry:
+	pte.pte_low = ptep->pte_low;
+	smp_rmb();
+	pte.pte_high = ptep->pte_high;
+	smp_rmb();
+	if (unlikely(pte.pte_low != ptep->pte_low))
+		goto retry;
+
+	return pte;
+#endif
+}
+
+/*
+ * The performance critical leaf functions are made noinline otherwise gcc
+ * inlines everything into a single function which results in too much
+ * register pressure.
+ */
+static noinline int gup_pte_range(pmd_t pmd, unsigned long addr,
+		unsigned long end, int write, struct page **pages, int *nr)
+{
+	unsigned long mask;
+	pte_t *ptep;
+
+	mask = _PAGE_PRESENT|_PAGE_USER;
+	if (write)
+		mask |= _PAGE_RW;
+
+	ptep = pte_offset_map(&pmd, addr);
+	do {
+		pte_t pte = gup_get_pte(ptep);
+		struct page *page;
+
+		if ((pte_val(pte) & (mask | _PAGE_SPECIAL)) != mask) {
+			pte_unmap(ptep);
+			return 0;
+		}
+		VM_BUG_ON(!pfn_valid(pte_pfn(pte)));
+		page = pte_page(pte);
+		get_page(page);
+		pages[*nr] = page;
+		(*nr)++;
+
+	} while (ptep++, addr += PAGE_SIZE, addr != end);
+	pte_unmap(ptep - 1);
+
+	return 1;
+}
+
+static inline void get_head_page_multiple(struct page *page, int nr)
+{
+	VM_BUG_ON(page != compound_head(page));
+	VM_BUG_ON(page_count(page) == 0);
+	atomic_add(nr, &page->_count);
+}
+
+static noinline int gup_huge_pmd(pmd_t pmd, unsigned long addr,
+		unsigned long end, int write, struct page **pages, int *nr)
+{
+	unsigned long mask;
+	pte_t pte = *(pte_t *)&pmd;
+	struct page *head, *page;
+	int refs;
+
+	mask = _PAGE_PRESENT|_PAGE_USER;
+	if (write)
+		mask |= _PAGE_RW;
+	if ((pte_val(pte) & mask) != mask)
+		return 0;
+	/* hugepages are never "special" */
+	VM_BUG_ON(pte_val(pte) & _PAGE_SPECIAL);
+	VM_BUG_ON(!pfn_valid(pte_pfn(pte)));
+
+	refs = 0;
+	head = pte_page(pte);
+	page = head + ((addr & ~PMD_MASK) >> PAGE_SHIFT);
+	do {
+		VM_BUG_ON(compound_head(page) != head);
+		pages[*nr] = page;
+		(*nr)++;
+		page++;
+		refs++;
+	} while (addr += PAGE_SIZE, addr != end);
+	get_head_page_multiple(head, refs);
+
+	return 1;
+}
+
+static int gup_pmd_range(pud_t pud, unsigned long addr, unsigned long end,
+		int write, struct page **pages, int *nr)
+{
+	unsigned long next;
+	pmd_t *pmdp;
+
+	pmdp = pmd_offset(&pud, addr);
+	do {
+		pmd_t pmd = *pmdp;
+
+		next = pmd_addr_end(addr, end);
+		if (pmd_none(pmd))
+			return 0;
+		if (unlikely(pmd_large(pmd))) {
+			if (!gup_huge_pmd(pmd, addr, next, write, pages, nr))
+				return 0;
+		} else {
+			if (!gup_pte_range(pmd, addr, next, write, pages, nr))
+				return 0;
+		}
+	} while (pmdp++, addr = next, addr != end);
+
+	return 1;
+}
+
+static noinline int gup_huge_pud(pud_t pud, unsigned long addr,
+		unsigned long end, int write, struct page **pages, int *nr)
+{
+	unsigned long mask;
+	pte_t pte = *(pte_t *)&pud;
+	struct page *head, *page;
+	int refs;
+
+	mask = _PAGE_PRESENT|_PAGE_USER;
+	if (write)
+		mask |= _PAGE_RW;
+	if ((pte_val(pte) & mask) != mask)
+		return 0;
+	/* hugepages are never "special" */
+	VM_BUG_ON(pte_val(pte) & _PAGE_SPECIAL);
+	VM_BUG_ON(!pfn_valid(pte_pfn(pte)));
+
+	refs = 0;
+	head = pte_page(pte);
+	page = head + ((addr & ~PUD_MASK) >> PAGE_SHIFT);
+	do {
+		VM_BUG_ON(compound_head(page) != head);
+		pages[*nr] = page;
+		(*nr)++;
+		page++;
+		refs++;
+	} while (addr += PAGE_SIZE, addr != end);
+	get_head_page_multiple(head, refs);
+
+	return 1;
+}
+
+static int gup_pud_range(pgd_t pgd, unsigned long addr, unsigned long end,
+			int write, struct page **pages, int *nr)
+{
+	unsigned long next;
+	pud_t *pudp;
+
+	pudp = pud_offset(&pgd, addr);
+	do {
+		pud_t pud = *pudp;
+
+		next = pud_addr_end(addr, end);
+		if (pud_none(pud))
+			return 0;
+		if (unlikely(pud_large(pud))) {
+			if (!gup_huge_pud(pud, addr, next, write, pages, nr))
+				return 0;
+		} else {
+			if (!gup_pmd_range(pud, addr, next, write, pages, nr))
+				return 0;
+		}
+	} while (pudp++, addr = next, addr != end);
+
+	return 1;
+}
+
+int get_user_pages_fast(unsigned long start, int nr_pages, int write,
+			struct page **pages)
+{
+	struct mm_struct *mm = current->mm;
+	unsigned long addr, len, end;
+	unsigned long next;
+	pgd_t *pgdp;
+	int nr = 0;
+
+	start &= PAGE_MASK;
+	addr = start;
+	len = (unsigned long) nr_pages << PAGE_SHIFT;
+	end = start + len;
+	if (unlikely(!access_ok(write ? VERIFY_WRITE : VERIFY_READ,
+					start, len)))
+		goto slow_irqon;
+
+	/*
+	 * XXX: batch / limit 'nr', to avoid large irq off latency
+	 * needs some instrumenting to determine the common sizes used by
+	 * important workloads (eg. DB2), and whether limiting the batch size
+	 * will decrease performance.
+	 *
+	 * It seems like we're in the clear for the moment. Direct-IO is
+	 * the main guy that batches up lots of get_user_pages, and even
+	 * they are limited to 64-at-a-time which is not so many.
+	 */
+	/*
+	 * This doesn't prevent pagetable teardown, but does prevent
+	 * the pagetables and pages from being freed on x86.
+	 *
+	 * So long as we atomically load page table pointers versus teardown
+	 * (which we do on x86, with the above PAE exception), we can follow the
+	 * address down to the the page and take a ref on it.
+	 */
+	local_irq_disable();
+	pgdp = pgd_offset(mm, addr);
+	do {
+		pgd_t pgd = *pgdp;
+
+		next = pgd_addr_end(addr, end);
+		if (pgd_none(pgd))
+			goto slow;
+		if (!gup_pud_range(pgd, addr, next, write, pages, &nr))
+			goto slow;
+	} while (pgdp++, addr = next, addr != end);
+	local_irq_enable();
+
+	VM_BUG_ON(nr != (end - start) >> PAGE_SHIFT);
+	return nr;
+
+	{
+		int ret;
+
+slow:
+		local_irq_enable();
+slow_irqon:
+		/* Try to get the remaining pages with get_user_pages */
+		start += nr << PAGE_SHIFT;
+		pages += nr;
+
+		down_read(&mm->mmap_sem);
+		ret = get_user_pages(current, mm, start,
+			(end - start) >> PAGE_SHIFT, write, 0, pages, NULL);
+		up_read(&mm->mmap_sem);
+
+		/* Have to be a bit careful with return values */
+		if (nr > 0) {
+			if (ret < 0)
+				ret = nr;
+			else
+				ret += nr;
+		}
+
+		return ret;
+	}
+}
diff --git a/arch/x86/mm/init_32.c b/arch/x86/mm/init_32.c
index d37f29376b0c..4974e97dedfe 100644
--- a/arch/x86/mm/init_32.c
+++ b/arch/x86/mm/init_32.c
@@ -47,6 +47,7 @@
 #include <asm/paravirt.h>
 #include <asm/setup.h>
 #include <asm/cacheflush.h>
+#include <asm/smp.h>
 
 unsigned int __VMALLOC_RESERVE = 128 << 20;
 
diff --git a/arch/x86/mm/init_64.c b/arch/x86/mm/init_64.c
index ec37121f6709..1f6806b62eb8 100644
--- a/arch/x86/mm/init_64.c
+++ b/arch/x86/mm/init_64.c
@@ -60,7 +60,7 @@ static unsigned long dma_reserve __initdata;
 
 DEFINE_PER_CPU(struct mmu_gather, mmu_gathers);
 
-int direct_gbpages __meminitdata
+int direct_gbpages
 #ifdef CONFIG_DIRECT_GBPAGES
 				= 1
 #endif
@@ -86,46 +86,69 @@ early_param("gbpages", parse_direct_gbpages_on);
  * around without checking the pgd every time.
  */
 
-void show_mem(void)
+int after_bootmem;
+
+unsigned long __supported_pte_mask __read_mostly = ~0UL;
+EXPORT_SYMBOL_GPL(__supported_pte_mask);
+
+static int do_not_nx __cpuinitdata;
+
+/*
+ * noexec=on|off
+ * Control non-executable mappings for 64-bit processes.
+ *
+ * on	Enable (default)
+ * off	Disable
+ */
+static int __init nonx_setup(char *str)
 {
-	long i, total = 0, reserved = 0;
-	long shared = 0, cached = 0;
-	struct page *page;
-	pg_data_t *pgdat;
-
-	printk(KERN_INFO "Mem-info:\n");
-	show_free_areas();
-	for_each_online_pgdat(pgdat) {
-		for (i = 0; i < pgdat->node_spanned_pages; ++i) {
-			/*
-			 * This loop can take a while with 256 GB and
-			 * 4k pages so defer the NMI watchdog:
-			 */
-			if (unlikely(i % MAX_ORDER_NR_PAGES == 0))
-				touch_nmi_watchdog();
-
-			if (!pfn_valid(pgdat->node_start_pfn + i))
-				continue;
-
-			page = pfn_to_page(pgdat->node_start_pfn + i);
-			total++;
-			if (PageReserved(page))
-				reserved++;
-			else if (PageSwapCache(page))
-				cached++;
-			else if (page_count(page))
-				shared += page_count(page) - 1;
-		}
+	if (!str)
+		return -EINVAL;
+	if (!strncmp(str, "on", 2)) {
+		__supported_pte_mask |= _PAGE_NX;
+		do_not_nx = 0;
+	} else if (!strncmp(str, "off", 3)) {
+		do_not_nx = 1;
+		__supported_pte_mask &= ~_PAGE_NX;
 	}
-	printk(KERN_INFO "%lu pages of RAM\n",		total);
-	printk(KERN_INFO "%lu reserved pages\n",	reserved);
-	printk(KERN_INFO "%lu pages shared\n",		shared);
-	printk(KERN_INFO "%lu pages swap cached\n",	cached);
+	return 0;
 }
+early_param("noexec", nonx_setup);
 
-int after_bootmem;
+void __cpuinit check_efer(void)
+{
+	unsigned long efer;
+
+	rdmsrl(MSR_EFER, efer);
+	if (!(efer & EFER_NX) || do_not_nx)
+		__supported_pte_mask &= ~_PAGE_NX;
+}
+
+int force_personality32;
+
+/*
+ * noexec32=on|off
+ * Control non executable heap for 32bit processes.
+ * To control the stack too use noexec=off
+ *
+ * on	PROT_READ does not imply PROT_EXEC for 32-bit processes (default)
+ * off	PROT_READ implies PROT_EXEC
+ */
+static int __init nonx32_setup(char *str)
+{
+	if (!strcmp(str, "on"))
+		force_personality32 &= ~READ_IMPLIES_EXEC;
+	else if (!strcmp(str, "off"))
+		force_personality32 |= READ_IMPLIES_EXEC;
+	return 1;
+}
+__setup("noexec32=", nonx32_setup);
 
-static __init void *spp_getpage(void)
+/*
+ * NOTE: This function is marked __ref because it calls __init function
+ * (alloc_bootmem_pages). It's safe to do it ONLY when after_bootmem == 0.
+ */
+static __ref void *spp_getpage(void)
 {
 	void *ptr;
 
@@ -274,7 +297,7 @@ static unsigned long __initdata table_start;
 static unsigned long __meminitdata table_end;
 static unsigned long __meminitdata table_top;
 
-static __meminit void *alloc_low_page(unsigned long *phys)
+static __ref void *alloc_low_page(unsigned long *phys)
 {
 	unsigned long pfn = table_end++;
 	void *adr;
@@ -295,7 +318,7 @@ static __meminit void *alloc_low_page(unsigned long *phys)
 	return adr;
 }
 
-static __meminit void unmap_low_page(void *adr)
+static __ref void unmap_low_page(void *adr)
 {
 	if (after_bootmem)
 		return;
@@ -351,6 +374,7 @@ phys_pmd_init(pmd_t *pmd_page, unsigned long address, unsigned long end,
 {
 	unsigned long pages = 0;
 	unsigned long last_map_addr = end;
+	unsigned long start = address;
 
 	int i = pmd_index(address);
 
@@ -368,16 +392,24 @@ phys_pmd_init(pmd_t *pmd_page, unsigned long address, unsigned long end,
 		}
 
 		if (pmd_val(*pmd)) {
-			if (!pmd_large(*pmd))
+			if (!pmd_large(*pmd)) {
+				spin_lock(&init_mm.page_table_lock);
 				last_map_addr = phys_pte_update(pmd, address,
-								 end);
+								end);
+				spin_unlock(&init_mm.page_table_lock);
+			}
+			/* Count entries we're using from level2_ident_pgt */
+			if (start == 0)
+				pages++;
 			continue;
 		}
 
 		if (page_size_mask & (1<<PG_LEVEL_2M)) {
 			pages++;
+			spin_lock(&init_mm.page_table_lock);
 			set_pte((pte_t *)pmd,
 				pfn_pte(address >> PAGE_SHIFT, PAGE_KERNEL_LARGE));
+			spin_unlock(&init_mm.page_table_lock);
 			last_map_addr = (address & PMD_MASK) + PMD_SIZE;
 			continue;
 		}
@@ -386,7 +418,9 @@ phys_pmd_init(pmd_t *pmd_page, unsigned long address, unsigned long end,
 		last_map_addr = phys_pte_init(pte, address, end);
 		unmap_low_page(pte);
 
+		spin_lock(&init_mm.page_table_lock);
 		pmd_populate_kernel(&init_mm, pmd, __va(pte_phys));
+		spin_unlock(&init_mm.page_table_lock);
 	}
 	update_page_count(PG_LEVEL_2M, pages);
 	return last_map_addr;
@@ -399,9 +433,7 @@ phys_pmd_update(pud_t *pud, unsigned long address, unsigned long end,
 	pmd_t *pmd = pmd_offset(pud, 0);
 	unsigned long last_map_addr;
 
-	spin_lock(&init_mm.page_table_lock);
 	last_map_addr = phys_pmd_init(pmd, address, end, page_size_mask);
-	spin_unlock(&init_mm.page_table_lock);
 	__flush_tlb_all();
 	return last_map_addr;
 }
@@ -437,20 +469,21 @@ phys_pud_init(pud_t *pud_page, unsigned long addr, unsigned long end,
 
 		if (page_size_mask & (1<<PG_LEVEL_1G)) {
 			pages++;
+			spin_lock(&init_mm.page_table_lock);
 			set_pte((pte_t *)pud,
 				pfn_pte(addr >> PAGE_SHIFT, PAGE_KERNEL_LARGE));
+			spin_unlock(&init_mm.page_table_lock);
 			last_map_addr = (addr & PUD_MASK) + PUD_SIZE;
 			continue;
 		}
 
 		pmd = alloc_low_page(&pmd_phys);
-
-		spin_lock(&init_mm.page_table_lock);
 		last_map_addr = phys_pmd_init(pmd, addr, end, page_size_mask);
 		unmap_low_page(pmd);
+
+		spin_lock(&init_mm.page_table_lock);
 		pud_populate(&init_mm, pud, __va(pmd_phys));
 		spin_unlock(&init_mm.page_table_lock);
-
 	}
 	__flush_tlb_all();
 	update_page_count(PG_LEVEL_1G, pages);
@@ -542,16 +575,14 @@ static unsigned long __init kernel_physical_mapping_init(unsigned long start,
 			continue;
 		}
 
-		if (after_bootmem)
-			pud = pud_offset(pgd, start & PGDIR_MASK);
-		else
-			pud = alloc_low_page(&pud_phys);
-
+		pud = alloc_low_page(&pud_phys);
 		last_map_addr = phys_pud_init(pud, __pa(start), __pa(next),
 						 page_size_mask);
 		unmap_low_page(pud);
-		pgd_populate(&init_mm, pgd_offset_k(start),
-			     __va(pud_phys));
+
+		spin_lock(&init_mm.page_table_lock);
+		pgd_populate(&init_mm, pgd, __va(pud_phys));
+		spin_unlock(&init_mm.page_table_lock);
 	}
 
 	return last_map_addr;
diff --git a/arch/x86/mm/ioremap.c b/arch/x86/mm/ioremap.c
index 016f335bbeea..cac6da54203b 100644
--- a/arch/x86/mm/ioremap.c
+++ b/arch/x86/mm/ioremap.c
@@ -170,7 +170,7 @@ static void __iomem *__ioremap_caller(resource_size_t phys_addr,
 	phys_addr &= PAGE_MASK;
 	size = PAGE_ALIGN(last_addr+1) - phys_addr;
 
-	retval = reserve_memtype(phys_addr, phys_addr + size,
+	retval = reserve_memtype(phys_addr, (u64)phys_addr + size,
 						prot_val, &new_prot_val);
 	if (retval) {
 		pr_debug("Warning: reserve_memtype returned %d\n", retval);
@@ -421,7 +421,7 @@ void unxlate_dev_mem_ptr(unsigned long phys, void *addr)
 	return;
 }
 
-int __initdata early_ioremap_debug;
+static int __initdata early_ioremap_debug;
 
 static int __init early_ioremap_debug_setup(char *str)
 {
@@ -547,19 +547,17 @@ static inline void __init early_clear_fixmap(enum fixed_addresses idx)
 }
 
 
-int __initdata early_ioremap_nested;
+static int __initdata early_ioremap_nested;
 
 static int __init check_early_ioremap_leak(void)
 {
 	if (!early_ioremap_nested)
 		return 0;
-
-	printk(KERN_WARNING
+	WARN(1, KERN_WARNING
 	       "Debug warning: early ioremap leak of %d areas detected.\n",
-	       early_ioremap_nested);
+		early_ioremap_nested);
 	printk(KERN_WARNING
-	       "please boot with early_ioremap_debug and report the dmesg.\n");
-	WARN_ON(1);
+		"please boot with early_ioremap_debug and report the dmesg.\n");
 
 	return 1;
 }
diff --git a/arch/x86/mm/mmio-mod.c b/arch/x86/mm/mmio-mod.c
index e7397e108beb..635b50e85581 100644
--- a/arch/x86/mm/mmio-mod.c
+++ b/arch/x86/mm/mmio-mod.c
@@ -430,7 +430,9 @@ static void enter_uniprocessor(void)
 						"may miss events.\n");
 }
 
-static void leave_uniprocessor(void)
+/* __ref because leave_uniprocessor calls cpu_up which is __cpuinit,
+   but this whole function is ifdefed CONFIG_HOTPLUG_CPU */
+static void __ref leave_uniprocessor(void)
 {
 	int cpu;
 	int err;
diff --git a/arch/x86/mm/pageattr-test.c b/arch/x86/mm/pageattr-test.c
index 0dcd42eb94e6..d4aa503caaa2 100644
--- a/arch/x86/mm/pageattr-test.c
+++ b/arch/x86/mm/pageattr-test.c
@@ -221,8 +221,7 @@ static int pageattr_test(void)
 	failed += print_split(&sc);
 
 	if (failed) {
-		printk(KERN_ERR "NOT PASSED. Please report.\n");
-		WARN_ON(1);
+		WARN(1, KERN_ERR "NOT PASSED. Please report.\n");
 		return -EINVAL;
 	} else {
 		if (print)
diff --git a/arch/x86/mm/pageattr.c b/arch/x86/mm/pageattr.c
index 65c6e46bf059..43e2f8483e4f 100644
--- a/arch/x86/mm/pageattr.c
+++ b/arch/x86/mm/pageattr.c
@@ -55,13 +55,19 @@ static void split_page_count(int level)
 
 int arch_report_meminfo(char *page)
 {
-	int n = sprintf(page, "DirectMap4k:  %8lu\n"
-			"DirectMap2M:  %8lu\n",
-			direct_pages_count[PG_LEVEL_4K],
-			direct_pages_count[PG_LEVEL_2M]);
+	int n = sprintf(page, "DirectMap4k:  %8lu kB\n",
+			direct_pages_count[PG_LEVEL_4K] << 2);
+#if defined(CONFIG_X86_64) || defined(CONFIG_X86_PAE)
+	n += sprintf(page + n, "DirectMap2M:  %8lu kB\n",
+			direct_pages_count[PG_LEVEL_2M] << 11);
+#else
+	n += sprintf(page + n, "DirectMap4M:  %8lu kB\n",
+			direct_pages_count[PG_LEVEL_2M] << 12);
+#endif
 #ifdef CONFIG_X86_64
-	n += sprintf(page + n, "DirectMap1G:  %8lu\n",
-		     direct_pages_count[PG_LEVEL_1G]);
+	if (direct_gbpages)
+		n += sprintf(page + n, "DirectMap1G:  %8lu kB\n",
+			direct_pages_count[PG_LEVEL_1G] << 20);
 #endif
 	return n;
 }
@@ -592,10 +598,9 @@ repeat:
 	if (!pte_val(old_pte)) {
 		if (!primary)
 			return 0;
-		printk(KERN_WARNING "CPA: called for zero pte. "
+		WARN(1, KERN_WARNING "CPA: called for zero pte. "
 		       "vaddr = %lx cpa->vaddr = %lx\n", address,
 		       cpa->vaddr);
-		WARN_ON(1);
 		return -EINVAL;
 	}
 
@@ -844,7 +849,7 @@ int set_memory_uc(unsigned long addr, int numpages)
 	/*
 	 * for now UC MINUS. see comments in ioremap_nocache()
 	 */
-	if (reserve_memtype(addr, addr + numpages * PAGE_SIZE,
+	if (reserve_memtype(__pa(addr), __pa(addr) + numpages * PAGE_SIZE,
 			    _PAGE_CACHE_UC_MINUS, NULL))
 		return -EINVAL;
 
@@ -863,7 +868,7 @@ int set_memory_wc(unsigned long addr, int numpages)
 	if (!pat_enabled)
 		return set_memory_uc(addr, numpages);
 
-	if (reserve_memtype(addr, addr + numpages * PAGE_SIZE,
+	if (reserve_memtype(__pa(addr), __pa(addr) + numpages * PAGE_SIZE,
 		_PAGE_CACHE_WC, NULL))
 		return -EINVAL;
 
@@ -879,7 +884,7 @@ int _set_memory_wb(unsigned long addr, int numpages)
 
 int set_memory_wb(unsigned long addr, int numpages)
 {
-	free_memtype(addr, addr + numpages * PAGE_SIZE);
+	free_memtype(__pa(addr), __pa(addr) + numpages * PAGE_SIZE);
 
 	return _set_memory_wb(addr, numpages);
 }
diff --git a/arch/x86/mm/pat.c b/arch/x86/mm/pat.c
index 2fe30916d4b6..2a50e0fa64a5 100644
--- a/arch/x86/mm/pat.c
+++ b/arch/x86/mm/pat.c
@@ -207,6 +207,9 @@ static int chk_conflict(struct memtype *new, struct memtype *entry,
 	return -EBUSY;
 }
 
+static struct memtype *cached_entry;
+static u64 cached_start;
+
 /*
  * req_type typically has one of the:
  * - _PAGE_CACHE_WB
@@ -280,11 +283,17 @@ int reserve_memtype(u64 start, u64 end, unsigned long req_type,
 
 	spin_lock(&memtype_lock);
 
+	if (cached_entry && start >= cached_start)
+		entry = cached_entry;
+	else
+		entry = list_entry(&memtype_list, struct memtype, nd);
+
 	/* Search for existing mapping that overlaps the current range */
 	where = NULL;
-	list_for_each_entry(entry, &memtype_list, nd) {
+	list_for_each_entry_continue(entry, &memtype_list, nd) {
 		if (end <= entry->start) {
 			where = entry->nd.prev;
+			cached_entry = list_entry(where, struct memtype, nd);
 			break;
 		} else if (start <= entry->start) { /* end > entry->start */
 			err = chk_conflict(new, entry, new_type);
@@ -292,6 +301,8 @@ int reserve_memtype(u64 start, u64 end, unsigned long req_type,
 				dprintk("Overlap at 0x%Lx-0x%Lx\n",
 					entry->start, entry->end);
 				where = entry->nd.prev;
+				cached_entry = list_entry(where,
+							struct memtype, nd);
 			}
 			break;
 		} else if (start < entry->end) { /* start > entry->start */
@@ -299,7 +310,20 @@ int reserve_memtype(u64 start, u64 end, unsigned long req_type,
 			if (!err) {
 				dprintk("Overlap at 0x%Lx-0x%Lx\n",
 					entry->start, entry->end);
-				where = &entry->nd;
+				cached_entry = list_entry(entry->nd.prev,
+							struct memtype, nd);
+
+				/*
+				 * Move to right position in the linked
+				 * list to add this new entry
+				 */
+				list_for_each_entry_continue(entry,
+							&memtype_list, nd) {
+					if (start <= entry->start) {
+						where = entry->nd.prev;
+						break;
+					}
+				}
 			}
 			break;
 		}
@@ -314,6 +338,8 @@ int reserve_memtype(u64 start, u64 end, unsigned long req_type,
 		return err;
 	}
 
+	cached_start = start;
+
 	if (where)
 		list_add(&new->nd, where);
 	else
@@ -343,6 +369,9 @@ int free_memtype(u64 start, u64 end)
 	spin_lock(&memtype_lock);
 	list_for_each_entry(entry, &memtype_list, nd) {
 		if (entry->start == start && entry->end == end) {
+			if (cached_entry == entry || cached_start == start)
+				cached_entry = NULL;
+
 			list_del(&entry->nd);
 			kfree(entry);
 			err = 0;
@@ -361,14 +390,6 @@ int free_memtype(u64 start, u64 end)
 }
 
 
-/*
- * /dev/mem mmap interface. The memtype used for mapping varies:
- * - Use UC for mappings with O_SYNC flag
- * - Without O_SYNC flag, if there is any conflict in reserve_memtype,
- *   inherit the memtype from existing mapping.
- * - Else use UC_MINUS memtype (for backward compatibility with existing
- *   X drivers.
- */
 pgprot_t phys_mem_access_prot(struct file *file, unsigned long pfn,
 				unsigned long size, pgprot_t vma_prot)
 {
@@ -406,14 +427,14 @@ int phys_mem_access_prot_allowed(struct file *file, unsigned long pfn,
 				unsigned long size, pgprot_t *vma_prot)
 {
 	u64 offset = ((u64) pfn) << PAGE_SHIFT;
-	unsigned long flags = _PAGE_CACHE_UC_MINUS;
+	unsigned long flags = -1;
 	int retval;
 
 	if (!range_is_allowed(pfn, size))
 		return 0;
 
 	if (file->f_flags & O_SYNC) {
-		flags = _PAGE_CACHE_UC;
+		flags = _PAGE_CACHE_UC_MINUS;
 	}
 
 #ifdef CONFIG_X86_32
@@ -436,13 +457,14 @@ int phys_mem_access_prot_allowed(struct file *file, unsigned long pfn,
 #endif
 
 	/*
-	 * With O_SYNC, we can only take UC mapping. Fail if we cannot.
+	 * With O_SYNC, we can only take UC_MINUS mapping. Fail if we cannot.
+	 *
 	 * Without O_SYNC, we want to get
 	 * - WB for WB-able memory and no other conflicting mappings
 	 * - UC_MINUS for non-WB-able memory with no other conflicting mappings
 	 * - Inherit from confliting mappings otherwise
 	 */
-	if (flags != _PAGE_CACHE_UC_MINUS) {
+	if (flags != -1) {
 		retval = reserve_memtype(offset, offset + size, flags, NULL);
 	} else {
 		retval = reserve_memtype(offset, offset + size, -1, &flags);
diff --git a/arch/x86/mm/pgtable.c b/arch/x86/mm/pgtable.c
index 557b2abceef8..d50302774fe2 100644
--- a/arch/x86/mm/pgtable.c
+++ b/arch/x86/mm/pgtable.c
@@ -207,6 +207,9 @@ static void pgd_prepopulate_pmd(struct mm_struct *mm, pgd_t *pgd, pmd_t *pmds[])
 	unsigned long addr;
 	int i;
 
+	if (PREALLOCATED_PMDS == 0) /* Work around gcc-3.4.x bug */
+		return;
+
 	pud = pud_offset(pgd, 0);
 
  	for (addr = i = 0; i < PREALLOCATED_PMDS;
diff --git a/arch/x86/mm/pgtable_32.c b/arch/x86/mm/pgtable_32.c
index b4becbf8c570..cab0abbd1ebe 100644
--- a/arch/x86/mm/pgtable_32.c
+++ b/arch/x86/mm/pgtable_32.c
@@ -20,53 +20,6 @@
 #include <asm/tlb.h>
 #include <asm/tlbflush.h>
 
-void show_mem(void)
-{
-	int total = 0, reserved = 0;
-	int shared = 0, cached = 0;
-	int highmem = 0;
-	struct page *page;
-	pg_data_t *pgdat;
-	unsigned long i;
-	unsigned long flags;
-
-	printk(KERN_INFO "Mem-info:\n");
-	show_free_areas();
-	for_each_online_pgdat(pgdat) {
-		pgdat_resize_lock(pgdat, &flags);
-		for (i = 0; i < pgdat->node_spanned_pages; ++i) {
-			if (unlikely(i % MAX_ORDER_NR_PAGES == 0))
-				touch_nmi_watchdog();
-			page = pgdat_page_nr(pgdat, i);
-			total++;
-			if (PageHighMem(page))
-				highmem++;
-			if (PageReserved(page))
-				reserved++;
-			else if (PageSwapCache(page))
-				cached++;
-			else if (page_count(page))
-				shared += page_count(page) - 1;
-		}
-		pgdat_resize_unlock(pgdat, &flags);
-	}
-	printk(KERN_INFO "%d pages of RAM\n", total);
-	printk(KERN_INFO "%d pages of HIGHMEM\n", highmem);
-	printk(KERN_INFO "%d reserved pages\n", reserved);
-	printk(KERN_INFO "%d pages shared\n", shared);
-	printk(KERN_INFO "%d pages swap cached\n", cached);
-
-	printk(KERN_INFO "%lu pages dirty\n", global_page_state(NR_FILE_DIRTY));
-	printk(KERN_INFO "%lu pages writeback\n",
-					global_page_state(NR_WRITEBACK));
-	printk(KERN_INFO "%lu pages mapped\n", global_page_state(NR_FILE_MAPPED));
-	printk(KERN_INFO "%lu pages slab\n",
-		global_page_state(NR_SLAB_RECLAIMABLE) +
-		global_page_state(NR_SLAB_UNRECLAIMABLE));
-	printk(KERN_INFO "%lu pages pagetables\n",
-					global_page_state(NR_PAGETABLE));
-}
-
 /*
  * Associate a virtual page frame with a given physical page frame 
  * and protection flags for that frame.
diff --git a/arch/x86/mm/srat_32.c b/arch/x86/mm/srat_32.c
index 1eb2973a301c..16ae70fc57e7 100644
--- a/arch/x86/mm/srat_32.c
+++ b/arch/x86/mm/srat_32.c
@@ -178,7 +178,7 @@ void acpi_numa_arch_fixup(void)
  * start of the node, and that the current "end" address is after
  * the previous one.
  */
-static __init void node_read_chunk(int nid, struct node_memory_chunk_s *memory_chunk)
+static __init int node_read_chunk(int nid, struct node_memory_chunk_s *memory_chunk)
 {
 	/*
 	 * Only add present memory as told by the e820.
@@ -189,10 +189,10 @@ static __init void node_read_chunk(int nid, struct node_memory_chunk_s *memory_c
 	if (memory_chunk->start_pfn >= max_pfn) {
 		printk(KERN_INFO "Ignoring SRAT pfns: %08lx - %08lx\n",
 			memory_chunk->start_pfn, memory_chunk->end_pfn);
-		return;
+		return -1;
 	}
 	if (memory_chunk->nid != nid)
-		return;
+		return -1;
 
 	if (!node_has_online_mem(nid))
 		node_start_pfn[nid] = memory_chunk->start_pfn;
@@ -202,6 +202,8 @@ static __init void node_read_chunk(int nid, struct node_memory_chunk_s *memory_c
 
 	if (node_end_pfn[nid] < memory_chunk->end_pfn)
 		node_end_pfn[nid] = memory_chunk->end_pfn;
+
+	return 0;
 }
 
 int __init get_memcfg_from_srat(void)
@@ -259,7 +261,9 @@ int __init get_memcfg_from_srat(void)
 		printk(KERN_DEBUG
 			"chunk %d nid %d start_pfn %08lx end_pfn %08lx\n",
 		       j, chunk->nid, chunk->start_pfn, chunk->end_pfn);
-		node_read_chunk(chunk->nid, chunk);
+		if (node_read_chunk(chunk->nid, chunk))
+			continue;
+
 		e820_register_active_regions(chunk->nid, chunk->start_pfn,
 					     min(chunk->end_pfn, max_pfn));
 	}
diff --git a/arch/x86/oprofile/nmi_int.c b/arch/x86/oprofile/nmi_int.c
index 3f90289410e6..0227694f7dab 100644
--- a/arch/x86/oprofile/nmi_int.c
+++ b/arch/x86/oprofile/nmi_int.c
@@ -15,6 +15,7 @@
 #include <linux/slab.h>
 #include <linux/moduleparam.h>
 #include <linux/kdebug.h>
+#include <linux/cpu.h>
 #include <asm/nmi.h>
 #include <asm/msr.h>
 #include <asm/apic.h>
@@ -28,23 +29,48 @@ static DEFINE_PER_CPU(unsigned long, saved_lvtpc);
 
 static int nmi_start(void);
 static void nmi_stop(void);
+static void nmi_cpu_start(void *dummy);
+static void nmi_cpu_stop(void *dummy);
 
 /* 0 == registered but off, 1 == registered and on */
 static int nmi_enabled = 0;
 
+#ifdef CONFIG_SMP
+static int oprofile_cpu_notifier(struct notifier_block *b, unsigned long action,
+				 void *data)
+{
+	int cpu = (unsigned long)data;
+	switch (action) {
+	case CPU_DOWN_FAILED:
+	case CPU_ONLINE:
+		smp_call_function_single(cpu, nmi_cpu_start, NULL, 0);
+		break;
+	case CPU_DOWN_PREPARE:
+		smp_call_function_single(cpu, nmi_cpu_stop, NULL, 1);
+		break;
+	}
+	return NOTIFY_DONE;
+}
+
+static struct notifier_block oprofile_cpu_nb = {
+	.notifier_call = oprofile_cpu_notifier
+};
+#endif
+
 #ifdef CONFIG_PM
 
 static int nmi_suspend(struct sys_device *dev, pm_message_t state)
 {
+	/* Only one CPU left, just stop that one */
 	if (nmi_enabled == 1)
-		nmi_stop();
+		nmi_cpu_stop(NULL);
 	return 0;
 }
 
 static int nmi_resume(struct sys_device *dev)
 {
 	if (nmi_enabled == 1)
-		nmi_start();
+		nmi_cpu_start(NULL);
 	return 0;
 }
 
@@ -463,6 +489,9 @@ int __init op_nmi_init(struct oprofile_operations *ops)
 	}
 
 	init_sysfs();
+#ifdef CONFIG_SMP
+	register_cpu_notifier(&oprofile_cpu_nb);
+#endif
 	using_nmi = 1;
 	ops->create_files = nmi_create_files;
 	ops->setup = nmi_setup;
@@ -476,6 +505,10 @@ int __init op_nmi_init(struct oprofile_operations *ops)
 
 void op_nmi_exit(void)
 {
-	if (using_nmi)
+	if (using_nmi) {
 		exit_sysfs();
+#ifdef CONFIG_SMP
+		unregister_cpu_notifier(&oprofile_cpu_nb);
+#endif
+	}
 }
diff --git a/arch/x86/pci/acpi.c b/arch/x86/pci/acpi.c
index 19af06927fbc..1d88d2b39771 100644
--- a/arch/x86/pci/acpi.c
+++ b/arch/x86/pci/acpi.c
@@ -250,10 +250,5 @@ int __init pci_acpi_init(void)
 			acpi_pci_irq_enable(dev);
 	}
 
-#ifdef CONFIG_X86_IO_APIC
-	if (acpi_ioapic)
-		print_IO_APIC();
-#endif
-
 	return 0;
 }
diff --git a/arch/x86/pci/amd_bus.c b/arch/x86/pci/amd_bus.c
index dbf532369711..6a0fca78c362 100644
--- a/arch/x86/pci/amd_bus.c
+++ b/arch/x86/pci/amd_bus.c
@@ -1,6 +1,7 @@
 #include <linux/init.h>
 #include <linux/pci.h>
 #include <linux/topology.h>
+#include <linux/cpu.h>
 #include "pci.h"
 
 #ifdef CONFIG_X86_64
@@ -555,15 +556,17 @@ static int __init early_fill_mp_bus_info(void)
 	return 0;
 }
 
-postcore_initcall(early_fill_mp_bus_info);
+#else  /* !CONFIG_X86_64 */
 
-#endif
+static int __init early_fill_mp_bus_info(void) { return 0; }
+
+#endif /* !CONFIG_X86_64 */
 
 /* common 32/64 bit code */
 
 #define ENABLE_CF8_EXT_CFG      (1ULL << 46)
 
-static void enable_pci_io_ecs_per_cpu(void *unused)
+static void enable_pci_io_ecs(void *unused)
 {
 	u64 reg;
 	rdmsrl(MSR_AMD64_NB_CFG, reg);
@@ -573,14 +576,51 @@ static void enable_pci_io_ecs_per_cpu(void *unused)
 	}
 }
 
-static int __init enable_pci_io_ecs(void)
+static int __cpuinit amd_cpu_notify(struct notifier_block *self,
+				    unsigned long action, void *hcpu)
 {
+	int cpu = (long)hcpu;
+	switch(action) {
+	case CPU_ONLINE:
+	case CPU_ONLINE_FROZEN:
+		smp_call_function_single(cpu, enable_pci_io_ecs, NULL, 0);
+		break;
+	default:
+		break;
+	}
+	return NOTIFY_OK;
+}
+
+static struct notifier_block __cpuinitdata amd_cpu_notifier = {
+	.notifier_call	= amd_cpu_notify,
+};
+
+static int __init pci_io_ecs_init(void)
+{
+	int cpu;
+
 	/* assume all cpus from fam10h have IO ECS */
         if (boot_cpu_data.x86 < 0x10)
 		return 0;
-	on_each_cpu(enable_pci_io_ecs_per_cpu, NULL, 1);
+
+	register_cpu_notifier(&amd_cpu_notifier);
+	for_each_online_cpu(cpu)
+		amd_cpu_notify(&amd_cpu_notifier, (unsigned long)CPU_ONLINE,
+			       (void *)(long)cpu);
 	pci_probe |= PCI_HAS_IO_ECS;
+
+	return 0;
+}
+
+static int __init amd_postcore_init(void)
+{
+	if (boot_cpu_data.x86_vendor != X86_VENDOR_AMD)
+		return 0;
+
+	early_fill_mp_bus_info();
+	pci_io_ecs_init();
+
 	return 0;
 }
 
-postcore_initcall(enable_pci_io_ecs);
+postcore_initcall(amd_postcore_init);
diff --git a/arch/x86/pci/fixup.c b/arch/x86/pci/fixup.c
index ff3a6a336342..4bdaa590375d 100644
--- a/arch/x86/pci/fixup.c
+++ b/arch/x86/pci/fixup.c
@@ -23,7 +23,8 @@ static void __devinit pci_fixup_i450nx(struct pci_dev *d)
 		pci_read_config_byte(d, reg++, &busno);
 		pci_read_config_byte(d, reg++, &suba);
 		pci_read_config_byte(d, reg++, &subb);
-		DBG("i450NX PXB %d: %02x/%02x/%02x\n", pxb, busno, suba, subb);
+		dev_dbg(&d->dev, "i450NX PXB %d: %02x/%02x/%02x\n", pxb, busno,
+			suba, subb);
 		if (busno)
 			pci_scan_bus_with_sysdata(busno);	/* Bus A */
 		if (suba < subb)
diff --git a/arch/x86/pci/i386.c b/arch/x86/pci/i386.c
index a09505806b82..844df0cbbd3e 100644
--- a/arch/x86/pci/i386.c
+++ b/arch/x86/pci/i386.c
@@ -33,6 +33,7 @@
 #include <linux/bootmem.h>
 
 #include <asm/pat.h>
+#include <asm/e820.h>
 
 #include "pci.h"
 
@@ -128,10 +129,7 @@ static void __init pcibios_allocate_bus_resources(struct list_head *bus_list)
 				pr = pci_find_parent_resource(dev, r);
 				if (!r->start || !pr ||
 				    request_resource(pr, r) < 0) {
-					printk(KERN_ERR "PCI: Cannot allocate "
-						"resource region %d "
-						"of bridge %s\n",
-						idx, pci_name(dev));
+					dev_err(&dev->dev, "BAR %d: can't allocate resource\n", idx);
 					/*
 					 * Something is wrong with the region.
 					 * Invalidate the resource to prevent
@@ -166,15 +164,13 @@ static void __init pcibios_allocate_resources(int pass)
 			else
 				disabled = !(command & PCI_COMMAND_MEMORY);
 			if (pass == disabled) {
-				DBG("PCI: Resource %08lx-%08lx "
-				    "(f=%lx, d=%d, p=%d)\n",
-				    r->start, r->end, r->flags, disabled, pass);
+				dev_dbg(&dev->dev, "resource %#08llx-%#08llx (f=%lx, d=%d, p=%d)\n",
+					(unsigned long long) r->start,
+					(unsigned long long) r->end,
+					r->flags, disabled, pass);
 				pr = pci_find_parent_resource(dev, r);
 				if (!pr || request_resource(pr, r) < 0) {
-					printk(KERN_ERR "PCI: Cannot allocate "
-						"resource region %d "
-						"of device %s\n",
-						idx, pci_name(dev));
+					dev_err(&dev->dev, "BAR %d: can't allocate resource\n", idx);
 					/* We'll assign a new address later */
 					r->end -= r->start;
 					r->start = 0;
@@ -187,8 +183,7 @@ static void __init pcibios_allocate_resources(int pass)
 				/* Turn the ROM off, leave the resource region,
 				 * but keep it unregistered. */
 				u32 reg;
-				DBG("PCI: Switching off ROM of %s\n",
-					pci_name(dev));
+				dev_dbg(&dev->dev, "disabling ROM\n");
 				r->flags &= ~IORESOURCE_ROM_ENABLE;
 				pci_read_config_dword(dev,
 						dev->rom_base_reg, &reg);
@@ -233,6 +228,8 @@ void __init pcibios_resource_survey(void)
 	pcibios_allocate_bus_resources(&pci_root_buses);
 	pcibios_allocate_resources(0);
 	pcibios_allocate_resources(1);
+
+	e820_reserve_resources_late();
 }
 
 /**
@@ -257,8 +254,7 @@ void pcibios_set_master(struct pci_dev *dev)
 		lat = pcibios_max_latency;
 	else
 		return;
-	printk(KERN_DEBUG "PCI: Setting latency timer of device %s to %d\n",
-		pci_name(dev), lat);
+	dev_printk(KERN_DEBUG, &dev->dev, "setting latency timer to %d\n", lat);
 	pci_write_config_byte(dev, PCI_LATENCY_TIMER, lat);
 }
 
diff --git a/arch/x86/pci/irq.c b/arch/x86/pci/irq.c
index 6a06a2eb0597..8e077185e185 100644
--- a/arch/x86/pci/irq.c
+++ b/arch/x86/pci/irq.c
@@ -436,7 +436,7 @@ static int pirq_vlsi_get(struct pci_dev *router, struct pci_dev *dev, int pirq)
 {
 	WARN_ON_ONCE(pirq >= 9);
 	if (pirq > 8) {
-		printk(KERN_INFO "VLSI router pirq escape (%d)\n", pirq);
+		dev_info(&dev->dev, "VLSI router PIRQ escape (%d)\n", pirq);
 		return 0;
 	}
 	return read_config_nybble(router, 0x74, pirq-1);
@@ -446,7 +446,7 @@ static int pirq_vlsi_set(struct pci_dev *router, struct pci_dev *dev, int pirq,
 {
 	WARN_ON_ONCE(pirq >= 9);
 	if (pirq > 8) {
-		printk(KERN_INFO "VLSI router pirq escape (%d)\n", pirq);
+		dev_info(&dev->dev, "VLSI router PIRQ escape (%d)\n", pirq);
 		return 0;
 	}
 	write_config_nybble(router, 0x74, pirq-1, irq);
@@ -492,15 +492,17 @@ static int pirq_amd756_get(struct pci_dev *router, struct pci_dev *dev, int pirq
 	irq = 0;
 	if (pirq <= 4)
 		irq = read_config_nybble(router, 0x56, pirq - 1);
-	printk(KERN_INFO "AMD756: dev %04x:%04x, router pirq : %d get irq : %2d\n",
-		dev->vendor, dev->device, pirq, irq);
+	dev_info(&dev->dev,
+		 "AMD756: dev [%04x/%04x], router PIRQ %d get IRQ %d\n",
+		 dev->vendor, dev->device, pirq, irq);
 	return irq;
 }
 
 static int pirq_amd756_set(struct pci_dev *router, struct pci_dev *dev, int pirq, int irq)
 {
-	printk(KERN_INFO "AMD756: dev %04x:%04x, router pirq : %d SET irq : %2d\n",
-		dev->vendor, dev->device, pirq, irq);
+	dev_info(&dev->dev,
+		 "AMD756: dev [%04x/%04x], router PIRQ %d set IRQ %d\n",
+		 dev->vendor, dev->device, pirq, irq);
 	if (pirq <= 4)
 		write_config_nybble(router, 0x56, pirq - 1, irq);
 	return 1;
@@ -588,6 +590,8 @@ static __init int intel_router_probe(struct irq_router *r, struct pci_dev *route
 	case PCI_DEVICE_ID_INTEL_ICH10_1:
 	case PCI_DEVICE_ID_INTEL_ICH10_2:
 	case PCI_DEVICE_ID_INTEL_ICH10_3:
+	case PCI_DEVICE_ID_INTEL_PCH_0:
+	case PCI_DEVICE_ID_INTEL_PCH_1:
 		r->name = "PIIX/ICH";
 		r->get = pirq_piix_get;
 		r->set = pirq_piix_set;
@@ -730,7 +734,6 @@ static __init int ali_router_probe(struct irq_router *r, struct pci_dev *router,
 	switch (device) {
 	case PCI_DEVICE_ID_AL_M1533:
 	case PCI_DEVICE_ID_AL_M1563:
-		printk(KERN_DEBUG "PCI: Using ALI IRQ Router\n");
 		r->name = "ALI";
 		r->get = pirq_ali_get;
 		r->set = pirq_ali_set;
@@ -840,11 +843,9 @@ static void __init pirq_find_router(struct irq_router *r)
 			h->probe(r, pirq_router_dev, pirq_router_dev->device))
 			break;
 	}
-	printk(KERN_INFO "PCI: Using IRQ router %s [%04x/%04x] at %s\n",
-		pirq_router.name,
-		pirq_router_dev->vendor,
-		pirq_router_dev->device,
-		pci_name(pirq_router_dev));
+	dev_info(&pirq_router_dev->dev, "%s IRQ router [%04x/%04x]\n",
+		 pirq_router.name,
+		 pirq_router_dev->vendor, pirq_router_dev->device);
 
 	/* The device remains referenced for the kernel lifetime */
 }
@@ -877,7 +878,7 @@ static int pcibios_lookup_irq(struct pci_dev *dev, int assign)
 	/* Find IRQ pin */
 	pci_read_config_byte(dev, PCI_INTERRUPT_PIN, &pin);
 	if (!pin) {
-		DBG(KERN_DEBUG " -> no interrupt pin\n");
+		dev_dbg(&dev->dev, "no interrupt pin\n");
 		return 0;
 	}
 	pin = pin - 1;
@@ -887,20 +888,20 @@ static int pcibios_lookup_irq(struct pci_dev *dev, int assign)
 	if (!pirq_table)
 		return 0;
 
-	DBG(KERN_DEBUG "IRQ for %s[%c]", pci_name(dev), 'A' + pin);
 	info = pirq_get_info(dev);
 	if (!info) {
-		DBG(" -> not found in routing table\n" KERN_DEBUG);
+		dev_dbg(&dev->dev, "PCI INT %c not found in routing table\n",
+			'A' + pin);
 		return 0;
 	}
 	pirq = info->irq[pin].link;
 	mask = info->irq[pin].bitmap;
 	if (!pirq) {
-		DBG(" -> not routed\n" KERN_DEBUG);
+		dev_dbg(&dev->dev, "PCI INT %c not routed\n", 'A' + pin);
 		return 0;
 	}
-	DBG(" -> PIRQ %02x, mask %04x, excl %04x", pirq, mask,
-		pirq_table->exclusive_irqs);
+	dev_dbg(&dev->dev, "PCI INT %c -> PIRQ %02x, mask %04x, excl %04x",
+		'A' + pin, pirq, mask, pirq_table->exclusive_irqs);
 	mask &= pcibios_irq_mask;
 
 	/* Work around broken HP Pavilion Notebooks which assign USB to
@@ -930,10 +931,8 @@ static int pcibios_lookup_irq(struct pci_dev *dev, int assign)
 		if (pci_probe & PCI_USE_PIRQ_MASK)
 			newirq = 0;
 		else
-			printk("\n" KERN_WARNING
-				"PCI: IRQ %i for device %s doesn't match PIRQ mask - try pci=usepirqmask\n"
-				KERN_DEBUG, newirq,
-				pci_name(dev));
+			dev_warn(&dev->dev, "IRQ %d doesn't match PIRQ mask "
+				 "%#x; try pci=usepirqmask\n", newirq, mask);
 	}
 	if (!newirq && assign) {
 		for (i = 0; i < 16; i++) {
@@ -944,39 +943,35 @@ static int pcibios_lookup_irq(struct pci_dev *dev, int assign)
 				newirq = i;
 		}
 	}
-	DBG(" -> newirq=%d", newirq);
+	dev_dbg(&dev->dev, "PCI INT %c -> newirq %d", 'A' + pin, newirq);
 
 	/* Check if it is hardcoded */
 	if ((pirq & 0xf0) == 0xf0) {
 		irq = pirq & 0xf;
-		DBG(" -> hardcoded IRQ %d\n", irq);
-		msg = "Hardcoded";
+		msg = "hardcoded";
 	} else if (r->get && (irq = r->get(pirq_router_dev, dev, pirq)) && \
 	((!(pci_probe & PCI_USE_PIRQ_MASK)) || ((1 << irq) & mask))) {
-		DBG(" -> got IRQ %d\n", irq);
-		msg = "Found";
+		msg = "found";
 		eisa_set_level_irq(irq);
 	} else if (newirq && r->set &&
 		(dev->class >> 8) != PCI_CLASS_DISPLAY_VGA) {
-		DBG(" -> assigning IRQ %d", newirq);
 		if (r->set(pirq_router_dev, dev, pirq, newirq)) {
 			eisa_set_level_irq(newirq);
-			DBG(" ... OK\n");
-			msg = "Assigned";
+			msg = "assigned";
 			irq = newirq;
 		}
 	}
 
 	if (!irq) {
-		DBG(" ... failed\n");
 		if (newirq && mask == (1 << newirq)) {
-			msg = "Guessed";
+			msg = "guessed";
 			irq = newirq;
-		} else
+		} else {
+			dev_dbg(&dev->dev, "can't route interrupt\n");
 			return 0;
+		}
 	}
-	printk(KERN_INFO "PCI: %s IRQ %d for device %s\n", msg, irq,
-		pci_name(dev));
+	dev_info(&dev->dev, "%s PCI INT %c -> IRQ %d\n", msg, 'A' + pin, irq);
 
 	/* Update IRQ for all devices with the same pirq value */
 	while ((dev2 = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, dev2)) != NULL) {
@@ -996,17 +991,17 @@ static int pcibios_lookup_irq(struct pci_dev *dev, int assign)
 			(!(pci_probe & PCI_USE_PIRQ_MASK) || \
 			((1 << dev2->irq) & mask))) {
 #ifndef CONFIG_PCI_MSI
-				printk(KERN_INFO "IRQ routing conflict for %s, have irq %d, want irq %d\n",
-				       pci_name(dev2), dev2->irq, irq);
+				dev_info(&dev2->dev, "IRQ routing conflict: "
+					 "have IRQ %d, want IRQ %d\n",
+					 dev2->irq, irq);
 #endif
 				continue;
 			}
 			dev2->irq = irq;
 			pirq_penalty[irq]++;
 			if (dev != dev2)
-				printk(KERN_INFO
-					"PCI: Sharing IRQ %d with %s\n",
-					irq, pci_name(dev2));
+				dev_info(&dev->dev, "sharing IRQ %d with %s\n",
+					 irq, pci_name(dev2));
 		}
 	}
 	return 1;
@@ -1025,8 +1020,7 @@ static void __init pcibios_fixup_irqs(void)
 		 * already in use.
 		 */
 		if (dev->irq >= 16) {
-			DBG(KERN_DEBUG "%s: ignoring bogus IRQ %d\n",
-				pci_name(dev), dev->irq);
+			dev_dbg(&dev->dev, "ignoring bogus IRQ %d\n", dev->irq);
 			dev->irq = 0;
 		}
 		/*
@@ -1070,12 +1064,12 @@ static void __init pcibios_fixup_irqs(void)
 					irq = IO_APIC_get_PCI_irq_vector(bridge->bus->number,
 							PCI_SLOT(bridge->devfn), pin);
 					if (irq >= 0)
-						printk(KERN_WARNING "PCI: using PPB %s[%c] to get irq %d\n",
-							pci_name(bridge), 'A' + pin, irq);
+						dev_warn(&dev->dev, "using bridge %s INT %c to get IRQ %d\n",
+							 pci_name(bridge),
+							 'A' + pin, irq);
 				}
 				if (irq >= 0) {
-					printk(KERN_INFO "PCI->APIC IRQ transform: %s[%c] -> IRQ %d\n",
-						pci_name(dev), 'A' + pin, irq);
+					dev_info(&dev->dev, "PCI->APIC IRQ transform: INT %c -> IRQ %d\n", 'A' + pin, irq);
 					dev->irq = irq;
 				}
 			}
@@ -1231,25 +1225,24 @@ static int pirq_enable_irq(struct pci_dev *dev)
 				irq = IO_APIC_get_PCI_irq_vector(bridge->bus->number,
 						PCI_SLOT(bridge->devfn), pin);
 				if (irq >= 0)
-					printk(KERN_WARNING
-						"PCI: using PPB %s[%c] to get irq %d\n",
-						pci_name(bridge),
-						'A' + pin, irq);
+					dev_warn(&dev->dev, "using bridge %s "
+						 "INT %c to get IRQ %d\n",
+						 pci_name(bridge), 'A' + pin,
+						 irq);
 				dev = bridge;
 			}
 			dev = temp_dev;
 			if (irq >= 0) {
-				printk(KERN_INFO
-					"PCI->APIC IRQ transform: %s[%c] -> IRQ %d\n",
-					pci_name(dev), 'A' + pin, irq);
+				dev_info(&dev->dev, "PCI->APIC IRQ transform: "
+					 "INT %c -> IRQ %d\n", 'A' + pin, irq);
 				dev->irq = irq;
 				return 0;
 			} else
-				msg = " Probably buggy MP table.";
+				msg = "; probably buggy MP table";
 		} else if (pci_probe & PCI_BIOS_IRQ_SCAN)
 			msg = "";
 		else
-			msg = " Please try using pci=biosirq.";
+			msg = "; please try using pci=biosirq";
 
 		/*
 		 * With IDE legacy devices the IRQ lookup failure is not
@@ -1259,9 +1252,8 @@ static int pirq_enable_irq(struct pci_dev *dev)
 				!(dev->class & 0x5))
 			return 0;
 
-		printk(KERN_WARNING
-			"PCI: No IRQ known for interrupt pin %c of device %s.%s\n",
-			'A' + pin, pci_name(dev), msg);
+		dev_warn(&dev->dev, "can't find IRQ for PCI INT %c%s\n",
+			 'A' + pin, msg);
 	}
 	return 0;
 }
diff --git a/arch/x86/pci/legacy.c b/arch/x86/pci/legacy.c
index ec9ce35e44d6..b722dd481b39 100644
--- a/arch/x86/pci/legacy.c
+++ b/arch/x86/pci/legacy.c
@@ -14,7 +14,7 @@ static void __devinit pcibios_fixup_peer_bridges(void)
 	int n, devfn;
 	long node;
 
-	if (pcibios_last_bus <= 0 || pcibios_last_bus >= 0xff)
+	if (pcibios_last_bus <= 0 || pcibios_last_bus > 0xff)
 		return;
 	DBG("PCI: Peer bridge fixup\n");
 
diff --git a/arch/x86/pci/mmconfig-shared.c b/arch/x86/pci/mmconfig-shared.c
index 23faaa890ffc..654a2234f8f3 100644
--- a/arch/x86/pci/mmconfig-shared.c
+++ b/arch/x86/pci/mmconfig-shared.c
@@ -209,7 +209,7 @@ static int __init pci_mmcfg_check_hostbridge(void)
 	return name != NULL;
 }
 
-static void __init pci_mmcfg_insert_resources(unsigned long resource_flags)
+static void __init pci_mmcfg_insert_resources(void)
 {
 #define PCI_MMCFG_RESOURCE_NAME_LEN 19
 	int i;
@@ -233,7 +233,7 @@ static void __init pci_mmcfg_insert_resources(unsigned long resource_flags)
 			 cfg->pci_segment);
 		res->start = cfg->address;
 		res->end = res->start + (num_buses << 20) - 1;
-		res->flags = IORESOURCE_MEM | resource_flags;
+		res->flags = IORESOURCE_MEM | IORESOURCE_BUSY;
 		insert_resource(&iomem_resource, res);
 		names += PCI_MMCFG_RESOURCE_NAME_LEN;
 	}
@@ -293,7 +293,7 @@ static acpi_status __init find_mboard_resource(acpi_handle handle, u32 lvl,
 	return AE_OK;
 }
 
-static int __init is_acpi_reserved(unsigned long start, unsigned long end)
+static int __init is_acpi_reserved(u64 start, u64 end, unsigned not_used)
 {
 	struct resource mcfg_res;
 
@@ -310,6 +310,41 @@ static int __init is_acpi_reserved(unsigned long start, unsigned long end)
 	return mcfg_res.flags;
 }
 
+typedef int (*check_reserved_t)(u64 start, u64 end, unsigned type);
+
+static int __init is_mmconf_reserved(check_reserved_t is_reserved,
+		u64 addr, u64 size, int i,
+		typeof(pci_mmcfg_config[0]) *cfg, int with_e820)
+{
+	u64 old_size = size;
+	int valid = 0;
+
+	while (!is_reserved(addr, addr + size - 1, E820_RESERVED)) {
+		size >>= 1;
+		if (size < (16UL<<20))
+			break;
+	}
+
+	if (size >= (16UL<<20) || size == old_size) {
+		printk(KERN_NOTICE
+		       "PCI: MCFG area at %Lx reserved in %s\n",
+			addr, with_e820?"E820":"ACPI motherboard resources");
+		valid = 1;
+
+		if (old_size != size) {
+			/* update end_bus_number */
+			cfg->end_bus_number = cfg->start_bus_number + ((size>>20) - 1);
+			printk(KERN_NOTICE "PCI: updated MCFG configuration %d: base %lx "
+			       "segment %hu buses %u - %u\n",
+			       i, (unsigned long)cfg->address, cfg->pci_segment,
+			       (unsigned int)cfg->start_bus_number,
+			       (unsigned int)cfg->end_bus_number);
+		}
+	}
+
+	return valid;
+}
+
 static void __init pci_mmcfg_reject_broken(int early)
 {
 	typeof(pci_mmcfg_config[0]) *cfg;
@@ -324,21 +359,22 @@ static void __init pci_mmcfg_reject_broken(int early)
 
 	for (i = 0; i < pci_mmcfg_config_num; i++) {
 		int valid = 0;
-		u32 size = (cfg->end_bus_number + 1) << 20;
+		u64 addr, size;
+
 		cfg = &pci_mmcfg_config[i];
+		addr = cfg->start_bus_number;
+		addr <<= 20;
+		addr += cfg->address;
+		size = cfg->end_bus_number + 1 - cfg->start_bus_number;
+		size <<= 20;
 		printk(KERN_NOTICE "PCI: MCFG configuration %d: base %lx "
 		       "segment %hu buses %u - %u\n",
 		       i, (unsigned long)cfg->address, cfg->pci_segment,
 		       (unsigned int)cfg->start_bus_number,
 		       (unsigned int)cfg->end_bus_number);
 
-		if (!early &&
-		    is_acpi_reserved(cfg->address, cfg->address + size - 1)) {
-			printk(KERN_NOTICE "PCI: MCFG area at %Lx reserved "
-			       "in ACPI motherboard resources\n",
-			       cfg->address);
-			valid = 1;
-		}
+		if (!early)
+			valid = is_mmconf_reserved(is_acpi_reserved, addr, size, i, cfg, 0);
 
 		if (valid)
 			continue;
@@ -347,16 +383,11 @@ static void __init pci_mmcfg_reject_broken(int early)
 			printk(KERN_ERR "PCI: BIOS Bug: MCFG area at %Lx is not"
 			       " reserved in ACPI motherboard resources\n",
 			       cfg->address);
+
 		/* Don't try to do this check unless configuration
 		   type 1 is available. how about type 2 ?*/
-		if (raw_pci_ops && e820_all_mapped(cfg->address,
-						  cfg->address + size - 1,
-						  E820_RESERVED)) {
-			printk(KERN_NOTICE
-			       "PCI: MCFG area at %Lx reserved in E820\n",
-			       cfg->address);
-			valid = 1;
-		}
+		if (raw_pci_ops)
+			valid = is_mmconf_reserved(e820_all_mapped, addr, size, i, cfg, 1);
 
 		if (!valid)
 			goto reject;
@@ -365,7 +396,7 @@ static void __init pci_mmcfg_reject_broken(int early)
 	return;
 
 reject:
-	printk(KERN_ERR "PCI: Not using MMCONFIG.\n");
+	printk(KERN_INFO "PCI: Not using MMCONFIG.\n");
 	pci_mmcfg_arch_free();
 	kfree(pci_mmcfg_config);
 	pci_mmcfg_config = NULL;
@@ -403,11 +434,9 @@ static void __init __pci_mmcfg_init(int early)
 	    (pci_mmcfg_config[0].address == 0))
 		return;
 
-	if (pci_mmcfg_arch_init()) {
-		if (known_bridge)
-			pci_mmcfg_insert_resources(IORESOURCE_BUSY);
+	if (pci_mmcfg_arch_init())
 		pci_probe = (pci_probe & ~PCI_PROBE_MASK) | PCI_PROBE_MMCONF;
-	} else {
+	else {
 		/*
 		 * Signal not to attempt to insert mmcfg resources because
 		 * the architecture mmcfg setup could not initialize.
@@ -444,7 +473,7 @@ static int __init pci_mmcfg_late_insert_resources(void)
 	 * marked so it won't cause request errors when __request_region is
 	 * called.
 	 */
-	pci_mmcfg_insert_resources(0);
+	pci_mmcfg_insert_resources();
 
 	return 0;
 }
diff --git a/arch/x86/pci/numaq_32.c b/arch/x86/pci/numaq_32.c
index f4b16dc11dad..1177845d3186 100644
--- a/arch/x86/pci/numaq_32.c
+++ b/arch/x86/pci/numaq_32.c
@@ -131,13 +131,14 @@ static void __devinit pci_fixup_i450nx(struct pci_dev *d)
 	u8 busno, suba, subb;
 	int quad = BUS2QUAD(d->bus->number);
 
-	printk("PCI: Searching for i450NX host bridges on %s\n", pci_name(d));
+	dev_info(&d->dev, "searching for i450NX host bridges\n");
 	reg = 0xd0;
 	for(pxb=0; pxb<2; pxb++) {
 		pci_read_config_byte(d, reg++, &busno);
 		pci_read_config_byte(d, reg++, &suba);
 		pci_read_config_byte(d, reg++, &subb);
-		DBG("i450NX PXB %d: %02x/%02x/%02x\n", pxb, busno, suba, subb);
+		dev_dbg(&d->dev, "i450NX PXB %d: %02x/%02x/%02x\n",
+			pxb, busno, suba, subb);
 		if (busno) {
 			/* Bus A */
 			pci_scan_bus_with_sysdata(QUADLOCAL2BUS(quad, busno));
diff --git a/arch/x86/power/cpu_32.c b/arch/x86/power/cpu_32.c
index 7dc5d5cf50a2..274d06082f48 100644
--- a/arch/x86/power/cpu_32.c
+++ b/arch/x86/power/cpu_32.c
@@ -11,6 +11,7 @@
 #include <linux/suspend.h>
 #include <asm/mtrr.h>
 #include <asm/mce.h>
+#include <asm/xcr.h>
 
 static struct saved_context saved_context;
 
@@ -45,7 +46,7 @@ static void __save_processor_state(struct saved_context *ctxt)
 	ctxt->cr0 = read_cr0();
 	ctxt->cr2 = read_cr2();
 	ctxt->cr3 = read_cr3();
-	ctxt->cr4 = read_cr4();
+	ctxt->cr4 = read_cr4_safe();
 }
 
 /* Needed by apm.c */
@@ -98,7 +99,9 @@ static void __restore_processor_state(struct saved_context *ctxt)
 	/*
 	 * control registers
 	 */
-	write_cr4(ctxt->cr4);
+	/* cr4 was introduced in the Pentium CPU */
+	if (ctxt->cr4)
+		write_cr4(ctxt->cr4);
 	write_cr3(ctxt->cr3);
 	write_cr2(ctxt->cr2);
 	write_cr0(ctxt->cr0);
@@ -124,6 +127,12 @@ static void __restore_processor_state(struct saved_context *ctxt)
 	if (boot_cpu_has(X86_FEATURE_SEP))
 		enable_sep_cpu();
 
+	/*
+	 * restore XCR0 for xsave capable cpu's.
+	 */
+	if (cpu_has_xsave)
+		xsetbv(XCR_XFEATURE_ENABLED_MASK, pcntxt_mask);
+
 	fix_processor_context();
 	do_fpu_end();
 	mtrr_ap_init();
diff --git a/arch/x86/power/cpu_64.c b/arch/x86/power/cpu_64.c
index 66bdfb591fd8..e3b6cf70d62c 100644
--- a/arch/x86/power/cpu_64.c
+++ b/arch/x86/power/cpu_64.c
@@ -14,6 +14,7 @@
 #include <asm/page.h>
 #include <asm/pgtable.h>
 #include <asm/mtrr.h>
+#include <asm/xcr.h>
 
 static void fix_processor_context(void);
 
@@ -122,6 +123,12 @@ static void __restore_processor_state(struct saved_context *ctxt)
 	wrmsrl(MSR_GS_BASE, ctxt->gs_base);
 	wrmsrl(MSR_KERNEL_GS_BASE, ctxt->gs_kernel_base);
 
+	/*
+	 * restore XCR0 for xsave capable cpu's.
+	 */
+	if (cpu_has_xsave)
+		xsetbv(XCR_XFEATURE_ENABLED_MASK, pcntxt_mask);
+
 	fix_processor_context();
 
 	do_fpu_end();
diff --git a/arch/x86/power/hibernate_asm_32.S b/arch/x86/power/hibernate_asm_32.S
index b95aa6cfe3cb..4fc7e872c85e 100644
--- a/arch/x86/power/hibernate_asm_32.S
+++ b/arch/x86/power/hibernate_asm_32.S
@@ -28,9 +28,9 @@ ENTRY(swsusp_arch_suspend)
 	ret
 
 ENTRY(restore_image)
-	movl	resume_pg_dir, %ecx
-	subl	$__PAGE_OFFSET, %ecx
-	movl	%ecx, %cr3
+	movl	resume_pg_dir, %eax
+	subl	$__PAGE_OFFSET, %eax
+	movl	%eax, %cr3
 
 	movl	restore_pblist, %edx
 	.p2align 4,,7
@@ -52,17 +52,21 @@ copy_loop:
 
 done:
 	/* go back to the original page tables */
-	movl	$swapper_pg_dir, %ecx
-	subl	$__PAGE_OFFSET, %ecx
-	movl	%ecx, %cr3
+	movl	$swapper_pg_dir, %eax
+	subl	$__PAGE_OFFSET, %eax
+	movl	%eax, %cr3
 	/* Flush TLB, including "global" things (vmalloc) */
-	movl	mmu_cr4_features, %eax
-	movl	%eax, %edx
+	movl	mmu_cr4_features, %ecx
+	jecxz	1f	# cr4 Pentium and higher, skip if zero
+	movl	%ecx, %edx
 	andl	$~(1<<7), %edx;  # PGE
 	movl	%edx, %cr4;  # turn off PGE
-	movl	%cr3, %ecx;  # flush TLB
-	movl	%ecx, %cr3
-	movl	%eax, %cr4;  # turn PGE back on
+1:
+	movl	%cr3, %eax;  # flush TLB
+	movl	%eax, %cr3
+	jecxz	1f	# cr4 Pentium and higher, skip if zero
+	movl	%ecx, %cr4;  # turn PGE back on
+1:
 
 	movl saved_context_esp, %esp
 	movl saved_context_ebp, %ebp
diff --git a/arch/x86/xen/enlighten.c b/arch/x86/xen/enlighten.c
index 9ff6e3cbf08f..8d28925ebed9 100644
--- a/arch/x86/xen/enlighten.c
+++ b/arch/x86/xen/enlighten.c
@@ -36,6 +36,7 @@
 #include <xen/hvc-console.h>
 
 #include <asm/paravirt.h>
+#include <asm/apic.h>
 #include <asm/page.h>
 #include <asm/xen/hypercall.h>
 #include <asm/xen/hypervisor.h>
@@ -580,16 +581,47 @@ static void xen_io_delay(void)
 }
 
 #ifdef CONFIG_X86_LOCAL_APIC
-static u32 xen_apic_read(unsigned long reg)
+static u32 xen_apic_read(u32 reg)
 {
 	return 0;
 }
 
-static void xen_apic_write(unsigned long reg, u32 val)
+static void xen_apic_write(u32 reg, u32 val)
 {
 	/* Warn to see if there's any stray references */
 	WARN_ON(1);
 }
+
+static u64 xen_apic_icr_read(void)
+{
+	return 0;
+}
+
+static void xen_apic_icr_write(u32 low, u32 id)
+{
+	/* Warn to see if there's any stray references */
+	WARN_ON(1);
+}
+
+static void xen_apic_wait_icr_idle(void)
+{
+        return;
+}
+
+static u32 xen_safe_apic_wait_icr_idle(void)
+{
+        return 0;
+}
+
+static struct apic_ops xen_basic_apic_ops = {
+	.read = xen_apic_read,
+	.write = xen_apic_write,
+	.icr_read = xen_apic_icr_read,
+	.icr_write = xen_apic_icr_write,
+	.wait_icr_idle = xen_apic_wait_icr_idle,
+	.safe_wait_icr_idle = xen_safe_apic_wait_icr_idle,
+};
+
 #endif
 
 static void xen_flush_tlb(void)
@@ -1273,8 +1305,6 @@ static const struct pv_irq_ops xen_irq_ops __initdata = {
 
 static const struct pv_apic_ops xen_apic_ops __initdata = {
 #ifdef CONFIG_X86_LOCAL_APIC
-	.apic_write = xen_apic_write,
-	.apic_read = xen_apic_read,
 	.setup_boot_clock = paravirt_nop,
 	.setup_secondary_clock = paravirt_nop,
 	.startup_ipi_hook = paravirt_nop,
@@ -1677,6 +1707,13 @@ asmlinkage void __init xen_start_kernel(void)
 	pv_apic_ops = xen_apic_ops;
 	pv_mmu_ops = xen_mmu_ops;
 
+#ifdef CONFIG_X86_LOCAL_APIC
+	/*
+	 * set up the basic apic ops.
+	 */
+	apic_ops = &xen_basic_apic_ops;
+#endif
+
 	if (xen_feature(XENFEAT_mmu_pt_update_preserve_ad)) {
 		pv_mmu_ops.ptep_modify_prot_start = xen_ptep_modify_prot_start;
 		pv_mmu_ops.ptep_modify_prot_commit = xen_ptep_modify_prot_commit;
diff --git a/arch/xtensa/kernel/xtensa_ksyms.c b/arch/xtensa/kernel/xtensa_ksyms.c
index 6e52cdd6166f..c9a7c5b74a0d 100644
--- a/arch/xtensa/kernel/xtensa_ksyms.c
+++ b/arch/xtensa/kernel/xtensa_ksyms.c
@@ -18,7 +18,6 @@
 #include <linux/interrupt.h>
 #include <asm/irq.h>
 #include <linux/in6.h>
-#include <linux/ide.h>
 
 #include <asm/uaccess.h>
 #include <asm/checksum.h>
diff --git a/arch/xtensa/mm/init.c b/arch/xtensa/mm/init.c
index 81d0560eaea2..34163cfaaffc 100644
--- a/arch/xtensa/mm/init.c
+++ b/arch/xtensa/mm/init.c
@@ -280,36 +280,9 @@ void free_initmem(void)
 	       (&__init_end - &__init_begin) >> 10);
 }
 
-void show_mem(void)
-{
-	int i, free = 0, total = 0, reserved = 0;
-	int shared = 0, cached = 0;
-
-	printk("Mem-info:\n");
-	show_free_areas();
-	printk("Free swap:       %6ldkB\n", nr_swap_pages<<(PAGE_SHIFT-10));
-	i = max_mapnr;
-	while (i-- > 0) {
-		total++;
-		if (PageReserved(mem_map+i))
-			reserved++;
-		else if (PageSwapCache(mem_map+i))
-			cached++;
-		else if (!page_count(mem_map + i))
-			free++;
-		else
-			shared += page_count(mem_map + i) - 1;
-	}
-	printk("%d pages of RAM\n", total);
-	printk("%d reserved pages\n", reserved);
-	printk("%d pages shared\n", shared);
-	printk("%d pages swap cached\n",cached);
-	printk("%d free pages\n", free);
-}
-
 struct kmem_cache *pgtable_cache __read_mostly;
 
-static void pgd_ctor(struct kmem_cache *cache, void* addr)
+static void pgd_ctor(void* addr)
 {
 	pte_t* ptep = (pte_t*)addr;
 	int i;
diff --git a/block/as-iosched.c b/block/as-iosched.c
index 9735acb5b4f5..cf4eb0eefbbf 100644
--- a/block/as-iosched.c
+++ b/block/as-iosched.c
@@ -837,8 +837,7 @@ static void as_completed_request(struct request_queue *q, struct request *rq)
 	WARN_ON(!list_empty(&rq->queuelist));
 
 	if (RQ_STATE(rq) != AS_RQ_REMOVED) {
-		printk("rq->state %d\n", RQ_STATE(rq));
-		WARN_ON(1);
+		WARN(1, "rq->state %d\n", RQ_STATE(rq));
 		goto out;
 	}
 
diff --git a/block/blk-core.c b/block/blk-core.c
index fef79ccb2a11..2cba5ef97b2b 100644
--- a/block/blk-core.c
+++ b/block/blk-core.c
@@ -212,6 +212,24 @@ void blk_plug_device(struct request_queue *q)
 }
 EXPORT_SYMBOL(blk_plug_device);
 
+/**
+ * blk_plug_device_unlocked - plug a device without queue lock held
+ * @q:    The &struct request_queue to plug
+ *
+ * Description:
+ *   Like @blk_plug_device(), but grabs the queue lock and disables
+ *   interrupts.
+ **/
+void blk_plug_device_unlocked(struct request_queue *q)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(q->queue_lock, flags);
+	blk_plug_device(q);
+	spin_unlock_irqrestore(q->queue_lock, flags);
+}
+EXPORT_SYMBOL(blk_plug_device_unlocked);
+
 /*
  * remove the queue from the plugged list, if present. called with
  * queue lock held and interrupts disabled.
@@ -564,6 +582,8 @@ blk_init_queue_node(request_fn_proc *rfn, spinlock_t *lock, int node_id)
 
 	q->sg_reserved_size = INT_MAX;
 
+	blk_set_cmd_filter_defaults(&q->cmd_filter);
+
 	/*
 	 * all done
 	 */
diff --git a/block/blk-map.c b/block/blk-map.c
index ddd96fb11a7d..af37e4ae62f5 100644
--- a/block/blk-map.c
+++ b/block/blk-map.c
@@ -269,7 +269,6 @@ int blk_rq_map_kern(struct request_queue *q, struct request *rq, void *kbuf,
 	int reading = rq_data_dir(rq) == READ;
 	int do_copy = 0;
 	struct bio *bio;
-	unsigned long stack_mask = ~(THREAD_SIZE - 1);
 
 	if (len > (q->max_hw_sectors << 9))
 		return -EINVAL;
@@ -278,11 +277,8 @@ int blk_rq_map_kern(struct request_queue *q, struct request *rq, void *kbuf,
 
 	kaddr = (unsigned long)kbuf;
 	alignment = queue_dma_alignment(q) | q->dma_pad_mask;
-	do_copy = ((kaddr & alignment) || (len & alignment));
-
-	if (!((kaddr & stack_mask) ^
-	      ((unsigned long)current->stack & stack_mask)))
-		do_copy = 1;
+	do_copy = ((kaddr & alignment) || (len & alignment) ||
+		   object_is_on_stack(kbuf));
 
 	if (do_copy)
 		bio = bio_copy_kern(q, kbuf, len, gfp_mask, reading);
diff --git a/block/blk-tag.c b/block/blk-tag.c
index 32667beb03ee..ed5166fbc599 100644
--- a/block/blk-tag.c
+++ b/block/blk-tag.c
@@ -38,7 +38,8 @@ static int __blk_free_tags(struct blk_queue_tag *bqt)
 
 	retval = atomic_dec_and_test(&bqt->refcnt);
 	if (retval) {
-		BUG_ON(bqt->busy);
+		BUG_ON(find_first_bit(bqt->tag_map, bqt->max_depth) <
+							bqt->max_depth);
 
 		kfree(bqt->tag_index);
 		bqt->tag_index = NULL;
@@ -147,7 +148,6 @@ static struct blk_queue_tag *__blk_queue_init_tags(struct request_queue *q,
 	if (init_tag_map(q, tags, depth))
 		goto fail;
 
-	tags->busy = 0;
 	atomic_set(&tags->refcnt, 1);
 	return tags;
 fail:
@@ -313,7 +313,6 @@ void blk_queue_end_tag(struct request_queue *q, struct request *rq)
 	 * unlock memory barrier semantics.
 	 */
 	clear_bit_unlock(tag, bqt->tag_map);
-	bqt->busy--;
 }
 EXPORT_SYMBOL(blk_queue_end_tag);
 
@@ -368,7 +367,6 @@ int blk_queue_start_tag(struct request_queue *q, struct request *rq)
 	bqt->tag_index[tag] = rq;
 	blkdev_dequeue_request(rq);
 	list_add(&rq->queuelist, &q->tag_busy_list);
-	bqt->busy++;
 	return 0;
 }
 EXPORT_SYMBOL(blk_queue_start_tag);
diff --git a/block/bsg.c b/block/bsg.c
index 5a68b09a69ba..0aae8d7ba99c 100644
--- a/block/bsg.c
+++ b/block/bsg.c
@@ -45,8 +45,6 @@ struct bsg_device {
 	char name[BUS_ID_SIZE];
 	int max_queue;
 	unsigned long flags;
-	struct blk_scsi_cmd_filter *cmd_filter;
-	mode_t *f_mode;
 };
 
 enum {
@@ -174,7 +172,8 @@ unlock:
 }
 
 static int blk_fill_sgv4_hdr_rq(struct request_queue *q, struct request *rq,
-				struct sg_io_v4 *hdr, struct bsg_device *bd)
+				struct sg_io_v4 *hdr, struct bsg_device *bd,
+				int has_write_perm)
 {
 	if (hdr->request_len > BLK_MAX_CDB) {
 		rq->cmd = kzalloc(hdr->request_len, GFP_KERNEL);
@@ -187,8 +186,7 @@ static int blk_fill_sgv4_hdr_rq(struct request_queue *q, struct request *rq,
 		return -EFAULT;
 
 	if (hdr->subprotocol == BSG_SUB_PROTOCOL_SCSI_CMD) {
-		if (blk_cmd_filter_verify_command(bd->cmd_filter, rq->cmd,
-						 bd->f_mode))
+		if (blk_verify_command(&q->cmd_filter, rq->cmd, has_write_perm))
 			return -EPERM;
 	} else if (!capable(CAP_SYS_RAWIO))
 		return -EPERM;
@@ -244,7 +242,7 @@ bsg_validate_sgv4_hdr(struct request_queue *q, struct sg_io_v4 *hdr, int *rw)
  * map sg_io_v4 to a request.
  */
 static struct request *
-bsg_map_hdr(struct bsg_device *bd, struct sg_io_v4 *hdr)
+bsg_map_hdr(struct bsg_device *bd, struct sg_io_v4 *hdr, int has_write_perm)
 {
 	struct request_queue *q = bd->queue;
 	struct request *rq, *next_rq = NULL;
@@ -266,7 +264,7 @@ bsg_map_hdr(struct bsg_device *bd, struct sg_io_v4 *hdr)
 	rq = blk_get_request(q, rw, GFP_KERNEL);
 	if (!rq)
 		return ERR_PTR(-ENOMEM);
-	ret = blk_fill_sgv4_hdr_rq(q, rq, hdr, bd);
+	ret = blk_fill_sgv4_hdr_rq(q, rq, hdr, bd, has_write_perm);
 	if (ret)
 		goto out;
 
@@ -568,25 +566,6 @@ static inline void bsg_set_block(struct bsg_device *bd, struct file *file)
 		set_bit(BSG_F_BLOCK, &bd->flags);
 }
 
-static void bsg_set_cmd_filter(struct bsg_device *bd,
-			   struct file *file)
-{
-	struct inode *inode;
-	struct gendisk *disk;
-
-	if (!file)
-		return;
-
-	inode = file->f_dentry->d_inode;
-	if (!inode)
-		return;
-
-	disk = inode->i_bdev->bd_disk;
-
-	bd->cmd_filter = &disk->cmd_filter;
-	bd->f_mode = &file->f_mode;
-}
-
 /*
  * Check if the error is a "real" error that we should return.
  */
@@ -608,7 +587,6 @@ bsg_read(struct file *file, char __user *buf, size_t count, loff_t *ppos)
 	dprintk("%s: read %Zd bytes\n", bd->name, count);
 
 	bsg_set_block(bd, file);
-	bsg_set_cmd_filter(bd, file);
 
 	bytes_read = 0;
 	ret = __bsg_read(buf, count, bd, NULL, &bytes_read);
@@ -621,7 +599,7 @@ bsg_read(struct file *file, char __user *buf, size_t count, loff_t *ppos)
 }
 
 static int __bsg_write(struct bsg_device *bd, const char __user *buf,
-		       size_t count, ssize_t *bytes_written)
+		       size_t count, ssize_t *bytes_written, int has_write_perm)
 {
 	struct bsg_command *bc;
 	struct request *rq;
@@ -652,7 +630,7 @@ static int __bsg_write(struct bsg_device *bd, const char __user *buf,
 		/*
 		 * get a request, fill in the blanks, and add to request queue
 		 */
-		rq = bsg_map_hdr(bd, &bc->hdr);
+		rq = bsg_map_hdr(bd, &bc->hdr, has_write_perm);
 		if (IS_ERR(rq)) {
 			ret = PTR_ERR(rq);
 			rq = NULL;
@@ -683,10 +661,11 @@ bsg_write(struct file *file, const char __user *buf, size_t count, loff_t *ppos)
 	dprintk("%s: write %Zd bytes\n", bd->name, count);
 
 	bsg_set_block(bd, file);
-	bsg_set_cmd_filter(bd, file);
 
 	bytes_written = 0;
-	ret = __bsg_write(bd, buf, count, &bytes_written);
+	ret = __bsg_write(bd, buf, count, &bytes_written,
+			  file->f_mode & FMODE_WRITE);
+
 	*ppos = bytes_written;
 
 	/*
@@ -792,7 +771,6 @@ static struct bsg_device *bsg_add_device(struct inode *inode,
 	bd->queue = rq;
 
 	bsg_set_block(bd, file);
-	bsg_set_cmd_filter(bd, file);
 
 	atomic_set(&bd->ref_count, 1);
 	mutex_lock(&bsg_mutex);
@@ -943,7 +921,7 @@ static long bsg_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
 		if (copy_from_user(&hdr, uarg, sizeof(hdr)))
 			return -EFAULT;
 
-		rq = bsg_map_hdr(bd, &hdr);
+		rq = bsg_map_hdr(bd, &hdr, file->f_mode & FMODE_WRITE);
 		if (IS_ERR(rq))
 			return PTR_ERR(rq);
 
diff --git a/block/cmd-filter.c b/block/cmd-filter.c
index eec4404fd357..228b6447e89f 100644
--- a/block/cmd-filter.c
+++ b/block/cmd-filter.c
@@ -20,15 +20,14 @@
 #include <linux/list.h>
 #include <linux/genhd.h>
 #include <linux/spinlock.h>
-#include <linux/parser.h>
 #include <linux/capability.h>
 #include <linux/bitops.h>
 
 #include <scsi/scsi.h>
 #include <linux/cdrom.h>
 
-int blk_cmd_filter_verify_command(struct blk_scsi_cmd_filter *filter,
-				  unsigned char *cmd, mode_t *f_mode)
+int blk_verify_command(struct blk_cmd_filter *filter,
+		       unsigned char *cmd, int has_write_perm)
 {
 	/* root can do any command. */
 	if (capable(CAP_SYS_RAWIO))
@@ -43,34 +42,15 @@ int blk_cmd_filter_verify_command(struct blk_scsi_cmd_filter *filter,
 		return 0;
 
 	/* Write-safe commands require a writable open */
-	if (test_bit(cmd[0], filter->write_ok) && (*f_mode & FMODE_WRITE))
+	if (test_bit(cmd[0], filter->write_ok) && has_write_perm)
 		return 0;
 
 	return -EPERM;
 }
-EXPORT_SYMBOL(blk_cmd_filter_verify_command);
-
-int blk_verify_command(struct file *file, unsigned char *cmd)
-{
-	struct gendisk *disk;
-	struct inode *inode;
-
-	if (!file)
-		return -EINVAL;
-
-	inode = file->f_dentry->d_inode;
-	if (!inode)
-		return -EINVAL;
-
-	disk = inode->i_bdev->bd_disk;
-
-	return blk_cmd_filter_verify_command(&disk->cmd_filter,
-						 cmd, &file->f_mode);
-}
 EXPORT_SYMBOL(blk_verify_command);
 
 /* and now, the sysfs stuff */
-static ssize_t rcf_cmds_show(struct blk_scsi_cmd_filter *filter, char *page,
+static ssize_t rcf_cmds_show(struct blk_cmd_filter *filter, char *page,
 			     int rw)
 {
 	char *npage = page;
@@ -84,8 +64,7 @@ static ssize_t rcf_cmds_show(struct blk_scsi_cmd_filter *filter, char *page,
 
 	for (i = 0; i < BLK_SCSI_MAX_CMDS; i++) {
 		if (test_bit(i, okbits)) {
-			sprintf(npage, "%02x", i);
-			npage += 2;
+			npage += sprintf(npage, "0x%02x", i);
 			if (i < BLK_SCSI_MAX_CMDS - 1)
 				sprintf(npage++, " ");
 		}
@@ -97,57 +76,65 @@ static ssize_t rcf_cmds_show(struct blk_scsi_cmd_filter *filter, char *page,
 	return npage - page;
 }
 
-static ssize_t rcf_readcmds_show(struct blk_scsi_cmd_filter *filter, char *page)
+static ssize_t rcf_readcmds_show(struct blk_cmd_filter *filter, char *page)
 {
 	return rcf_cmds_show(filter, page, READ);
 }
 
-static ssize_t rcf_writecmds_show(struct blk_scsi_cmd_filter *filter,
+static ssize_t rcf_writecmds_show(struct blk_cmd_filter *filter,
 				 char *page)
 {
 	return rcf_cmds_show(filter, page, WRITE);
 }
 
-static ssize_t rcf_cmds_store(struct blk_scsi_cmd_filter *filter,
+static ssize_t rcf_cmds_store(struct blk_cmd_filter *filter,
 			      const char *page, size_t count, int rw)
 {
-	ssize_t ret = 0;
 	unsigned long okbits[BLK_SCSI_CMD_PER_LONG], *target_okbits;
-	int cmd, status, len;
-	substring_t ss;
-
-	memset(&okbits, 0, sizeof(okbits));
-
-	for (len = strlen(page); len > 0; len -= 3) {
-		if (len < 2)
-			break;
-		ss.from = (char *) page + ret;
-		ss.to = (char *) page + ret + 2;
-		ret += 3;
-		status = match_hex(&ss, &cmd);
+	int cmd, set;
+	char *p, *status;
+
+	if (rw == READ) {
+		memcpy(&okbits, filter->read_ok, sizeof(okbits));
+		target_okbits = filter->read_ok;
+	} else {
+		memcpy(&okbits, filter->write_ok, sizeof(okbits));
+		target_okbits = filter->write_ok;
+	}
+
+	while ((p = strsep((char **)&page, " ")) != NULL) {
+		set = 1;
+
+		if (p[0] == '+') {
+			p++;
+		} else if (p[0] == '-') {
+			set = 0;
+			p++;
+		}
+
+		cmd = simple_strtol(p, &status, 16);
+
 		/* either of these cases means invalid input, so do nothing. */
-		if (status || cmd >= BLK_SCSI_MAX_CMDS)
+		if ((status == p) || cmd >= BLK_SCSI_MAX_CMDS)
 			return -EINVAL;
 
-		__set_bit(cmd, okbits);
+		if (set)
+			__set_bit(cmd, okbits);
+		else
+			__clear_bit(cmd, okbits);
 	}
 
-	if (rw == READ)
-		target_okbits = filter->read_ok;
-	else
-		target_okbits = filter->write_ok;
-
-	memmove(target_okbits, okbits, sizeof(okbits));
+	memcpy(target_okbits, okbits, sizeof(okbits));
 	return count;
 }
 
-static ssize_t rcf_readcmds_store(struct blk_scsi_cmd_filter *filter,
+static ssize_t rcf_readcmds_store(struct blk_cmd_filter *filter,
 				  const char *page, size_t count)
 {
 	return rcf_cmds_store(filter, page, count, READ);
 }
 
-static ssize_t rcf_writecmds_store(struct blk_scsi_cmd_filter *filter,
+static ssize_t rcf_writecmds_store(struct blk_cmd_filter *filter,
 				   const char *page, size_t count)
 {
 	return rcf_cmds_store(filter, page, count, WRITE);
@@ -155,8 +142,8 @@ static ssize_t rcf_writecmds_store(struct blk_scsi_cmd_filter *filter,
 
 struct rcf_sysfs_entry {
 	struct attribute attr;
-	ssize_t (*show)(struct blk_scsi_cmd_filter *, char *);
-	ssize_t (*store)(struct blk_scsi_cmd_filter *, const char *, size_t);
+	ssize_t (*show)(struct blk_cmd_filter *, char *);
+	ssize_t (*store)(struct blk_cmd_filter *, const char *, size_t);
 };
 
 static struct rcf_sysfs_entry rcf_readcmds_entry = {
@@ -183,9 +170,9 @@ static ssize_t
 rcf_attr_show(struct kobject *kobj, struct attribute *attr, char *page)
 {
 	struct rcf_sysfs_entry *entry = to_rcf(attr);
-	struct blk_scsi_cmd_filter *filter;
+	struct blk_cmd_filter *filter;
 
-	filter = container_of(kobj, struct blk_scsi_cmd_filter, kobj);
+	filter = container_of(kobj, struct blk_cmd_filter, kobj);
 	if (entry->show)
 		return entry->show(filter, page);
 
@@ -197,7 +184,7 @@ rcf_attr_store(struct kobject *kobj, struct attribute *attr,
 			const char *page, size_t length)
 {
 	struct rcf_sysfs_entry *entry = to_rcf(attr);
-	struct blk_scsi_cmd_filter *filter;
+	struct blk_cmd_filter *filter;
 
 	if (!capable(CAP_SYS_RAWIO))
 		return -EPERM;
@@ -205,7 +192,7 @@ rcf_attr_store(struct kobject *kobj, struct attribute *attr,
 	if (!entry->store)
 		return -EINVAL;
 
-	filter = container_of(kobj, struct blk_scsi_cmd_filter, kobj);
+	filter = container_of(kobj, struct blk_cmd_filter, kobj);
 	return entry->store(filter, page, length);
 }
 
@@ -219,116 +206,30 @@ static struct kobj_type rcf_ktype = {
 	.default_attrs = default_attrs,
 };
 
-#ifndef MAINTENANCE_IN_CMD
-#define MAINTENANCE_IN_CMD 0xa3
-#endif
-
-static void rcf_set_defaults(struct blk_scsi_cmd_filter *filter)
-{
-	/* Basic read-only commands */
-	__set_bit(TEST_UNIT_READY, filter->read_ok);
-	__set_bit(REQUEST_SENSE, filter->read_ok);
-	__set_bit(READ_6, filter->read_ok);
-	__set_bit(READ_10, filter->read_ok);
-	__set_bit(READ_12, filter->read_ok);
-	__set_bit(READ_16, filter->read_ok);
-	__set_bit(READ_BUFFER, filter->read_ok);
-	__set_bit(READ_DEFECT_DATA, filter->read_ok);
-	__set_bit(READ_CAPACITY, filter->read_ok);
-	__set_bit(READ_LONG, filter->read_ok);
-	__set_bit(INQUIRY, filter->read_ok);
-	__set_bit(MODE_SENSE, filter->read_ok);
-	__set_bit(MODE_SENSE_10, filter->read_ok);
-	__set_bit(LOG_SENSE, filter->read_ok);
-	__set_bit(START_STOP, filter->read_ok);
-	__set_bit(GPCMD_VERIFY_10, filter->read_ok);
-	__set_bit(VERIFY_16, filter->read_ok);
-	__set_bit(REPORT_LUNS, filter->read_ok);
-	__set_bit(SERVICE_ACTION_IN, filter->read_ok);
-	__set_bit(RECEIVE_DIAGNOSTIC, filter->read_ok);
-	__set_bit(MAINTENANCE_IN_CMD, filter->read_ok);
-	__set_bit(GPCMD_READ_BUFFER_CAPACITY, filter->read_ok);
-
-	/* Audio CD commands */
-	__set_bit(GPCMD_PLAY_CD, filter->read_ok);
-	__set_bit(GPCMD_PLAY_AUDIO_10, filter->read_ok);
-	__set_bit(GPCMD_PLAY_AUDIO_MSF, filter->read_ok);
-	__set_bit(GPCMD_PLAY_AUDIO_TI, filter->read_ok);
-	__set_bit(GPCMD_PAUSE_RESUME, filter->read_ok);
-
-	/* CD/DVD data reading */
-	__set_bit(GPCMD_READ_CD, filter->read_ok);
-	__set_bit(GPCMD_READ_CD_MSF, filter->read_ok);
-	__set_bit(GPCMD_READ_DISC_INFO, filter->read_ok);
-	__set_bit(GPCMD_READ_CDVD_CAPACITY, filter->read_ok);
-	__set_bit(GPCMD_READ_DVD_STRUCTURE, filter->read_ok);
-	__set_bit(GPCMD_READ_HEADER, filter->read_ok);
-	__set_bit(GPCMD_READ_TRACK_RZONE_INFO, filter->read_ok);
-	__set_bit(GPCMD_READ_SUBCHANNEL, filter->read_ok);
-	__set_bit(GPCMD_READ_TOC_PMA_ATIP, filter->read_ok);
-	__set_bit(GPCMD_REPORT_KEY, filter->read_ok);
-	__set_bit(GPCMD_SCAN, filter->read_ok);
-	__set_bit(GPCMD_GET_CONFIGURATION, filter->read_ok);
-	__set_bit(GPCMD_READ_FORMAT_CAPACITIES, filter->read_ok);
-	__set_bit(GPCMD_GET_EVENT_STATUS_NOTIFICATION, filter->read_ok);
-	__set_bit(GPCMD_GET_PERFORMANCE, filter->read_ok);
-	__set_bit(GPCMD_SEEK, filter->read_ok);
-	__set_bit(GPCMD_STOP_PLAY_SCAN, filter->read_ok);
-
-	/* Basic writing commands */
-	__set_bit(WRITE_6, filter->write_ok);
-	__set_bit(WRITE_10, filter->write_ok);
-	__set_bit(WRITE_VERIFY, filter->write_ok);
-	__set_bit(WRITE_12, filter->write_ok);
-	__set_bit(WRITE_VERIFY_12, filter->write_ok);
-	__set_bit(WRITE_16, filter->write_ok);
-	__set_bit(WRITE_LONG, filter->write_ok);
-	__set_bit(WRITE_LONG_2, filter->write_ok);
-	__set_bit(ERASE, filter->write_ok);
-	__set_bit(GPCMD_MODE_SELECT_10, filter->write_ok);
-	__set_bit(MODE_SELECT, filter->write_ok);
-	__set_bit(LOG_SELECT, filter->write_ok);
-	__set_bit(GPCMD_BLANK, filter->write_ok);
-	__set_bit(GPCMD_CLOSE_TRACK, filter->write_ok);
-	__set_bit(GPCMD_FLUSH_CACHE, filter->write_ok);
-	__set_bit(GPCMD_FORMAT_UNIT, filter->write_ok);
-	__set_bit(GPCMD_REPAIR_RZONE_TRACK, filter->write_ok);
-	__set_bit(GPCMD_RESERVE_RZONE_TRACK, filter->write_ok);
-	__set_bit(GPCMD_SEND_DVD_STRUCTURE, filter->write_ok);
-	__set_bit(GPCMD_SEND_EVENT, filter->write_ok);
-	__set_bit(GPCMD_SEND_KEY, filter->write_ok);
-	__set_bit(GPCMD_SEND_OPC, filter->write_ok);
-	__set_bit(GPCMD_SEND_CUE_SHEET, filter->write_ok);
-	__set_bit(GPCMD_SET_SPEED, filter->write_ok);
-	__set_bit(GPCMD_PREVENT_ALLOW_MEDIUM_REMOVAL, filter->write_ok);
-	__set_bit(GPCMD_LOAD_UNLOAD, filter->write_ok);
-	__set_bit(GPCMD_SET_STREAMING, filter->write_ok);
-}
-
 int blk_register_filter(struct gendisk *disk)
 {
 	int ret;
-	struct blk_scsi_cmd_filter *filter = &disk->cmd_filter;
+	struct blk_cmd_filter *filter = &disk->queue->cmd_filter;
 	struct kobject *parent = kobject_get(disk->holder_dir->parent);
 
 	if (!parent)
 		return -ENODEV;
 
 	ret = kobject_init_and_add(&filter->kobj, &rcf_ktype, parent,
-				 "%s", "cmd_filter");
+				   "%s", "cmd_filter");
 
 	if (ret < 0)
 		return ret;
 
-	rcf_set_defaults(filter);
 	return 0;
 }
+EXPORT_SYMBOL(blk_register_filter);
 
 void blk_unregister_filter(struct gendisk *disk)
 {
-	struct blk_scsi_cmd_filter *filter = &disk->cmd_filter;
+	struct blk_cmd_filter *filter = &disk->queue->cmd_filter;
 
 	kobject_put(&filter->kobj);
 	kobject_put(disk->holder_dir->parent);
 }
-
+EXPORT_SYMBOL(blk_unregister_filter);
diff --git a/block/genhd.c b/block/genhd.c
index c13cc77291af..e0ce23ac2ece 100644
--- a/block/genhd.c
+++ b/block/genhd.c
@@ -190,7 +190,6 @@ void add_disk(struct gendisk *disk)
 			    disk->minors, NULL, exact_match, exact_lock, disk);
 	register_disk(disk);
 	blk_register_queue(disk);
-	blk_register_filter(disk);
 
 	bdi = &disk->queue->backing_dev_info;
 	bdi_register_dev(bdi, MKDEV(disk->major, disk->first_minor));
@@ -203,7 +202,6 @@ EXPORT_SYMBOL(del_gendisk);	/* in partitions/check.c */
 
 void unlink_gendisk(struct gendisk *disk)
 {
-	blk_unregister_filter(disk);
 	sysfs_remove_link(&disk->dev.kobj, "bdi");
 	bdi_unregister(&disk->queue->backing_dev_info);
 	blk_unregister_queue(disk);
@@ -293,27 +291,30 @@ void __init printk_all_partitions(void)
 /* iterator */
 static int find_start(struct device *dev, void *data)
 {
-	loff_t k = *(loff_t *)data;
+	loff_t *k = data;
 
 	if (dev->type != &disk_type)
 		return 0;
-	if (!k--)
+	if (!*k)
 		return 1;
+	(*k)--;
 	return 0;
 }
 
 static void *part_start(struct seq_file *part, loff_t *pos)
 {
 	struct device *dev;
-	loff_t n = *pos;
+	loff_t k = *pos;
 
-	if (!n)
-		seq_puts(part, "major minor  #blocks  name\n\n");
+	if (!k)
+		part->private = (void *)1LU;	/* tell show to print header */
 
 	mutex_lock(&block_class_lock);
-	dev = class_find_device(&block_class, NULL, (void *)pos, find_start);
-	if (dev)
+	dev = class_find_device(&block_class, NULL, &k, find_start);
+	if (dev) {
+		put_device(dev);
 		return dev_to_disk(dev);
+	}
 	return NULL;
 }
 
@@ -330,8 +331,10 @@ static void *part_next(struct seq_file *part, void *v, loff_t *pos)
 	struct device *dev;
 	++*pos;
 	dev = class_find_device(&block_class, &gp->dev, NULL, find_next);
-	if (dev)
+	if (dev) {
+		put_device(dev);
 		return dev_to_disk(dev);
+	}
 	return NULL;
 }
 
@@ -346,6 +349,17 @@ static int show_partition(struct seq_file *part, void *v)
 	int n;
 	char buf[BDEVNAME_SIZE];
 
+	/*
+	 * Print header if start told us to do.  This is to preserve
+	 * the original behavior of not printing header if no
+	 * partition exists.  This hackery will be removed later with
+	 * class iteration clean up.
+	 */
+	if (part->private) {
+		seq_puts(part, "major minor  #blocks  name\n\n");
+		part->private = NULL;
+	}
+
 	/* Don't show non-partitionable removeable devices or empty devices */
 	if (!get_capacity(sgp) ||
 			(sgp->minors == 1 && (sgp->flags & GENHD_FL_REMOVABLE)))
@@ -568,11 +582,14 @@ static struct device_type disk_type = {
 static void *diskstats_start(struct seq_file *part, loff_t *pos)
 {
 	struct device *dev;
+	loff_t k = *pos;
 
 	mutex_lock(&block_class_lock);
-	dev = class_find_device(&block_class, NULL, (void *)pos, find_start);
-	if (dev)
+	dev = class_find_device(&block_class, NULL, &k, find_start);
+	if (dev) {
+		put_device(dev);
 		return dev_to_disk(dev);
+	}
 	return NULL;
 }
 
@@ -583,8 +600,10 @@ static void *diskstats_next(struct seq_file *part, void *v, loff_t *pos)
 
 	++*pos;
 	dev = class_find_device(&block_class, &gp->dev, NULL, find_next);
-	if (dev)
+	if (dev) {
+		put_device(dev);
 		return dev_to_disk(dev);
+	}
 	return NULL;
 }
 
@@ -712,10 +731,12 @@ dev_t blk_lookup_devt(const char *name, int part)
 	mutex_lock(&block_class_lock);
 	find.name = name;
 	find.part = part;
-	dev = class_find_device(&block_class, NULL, (void *)&find, match_id);
-	if (dev)
+	dev = class_find_device(&block_class, NULL, &find, match_id);
+	if (dev) {
+		put_device(dev);
 		devt = MKDEV(MAJOR(dev->devt),
 			     MINOR(dev->devt) + part);
+	}
 	mutex_unlock(&block_class_lock);
 
 	return devt;
diff --git a/block/ioctl.c b/block/ioctl.c
index 52d6385216ad..77185e5c026a 100644
--- a/block/ioctl.c
+++ b/block/ioctl.c
@@ -17,6 +17,7 @@ static int blkpg_ioctl(struct block_device *bdev, struct blkpg_ioctl_arg __user
 	long long start, length;
 	int part;
 	int i;
+	int err;
 
 	if (!capable(CAP_SYS_ADMIN))
 		return -EACCES;
@@ -61,9 +62,9 @@ static int blkpg_ioctl(struct block_device *bdev, struct blkpg_ioctl_arg __user
 				}
 			}
 			/* all seems OK */
-			add_partition(disk, part, start, length, ADDPART_FLAG_NONE);
+			err = add_partition(disk, part, start, length, ADDPART_FLAG_NONE);
 			mutex_unlock(&bdev->bd_mutex);
-			return 0;
+			return err;
 		case BLKPG_DEL_PARTITION:
 			if (!disk->part[part-1])
 				return -ENXIO;
diff --git a/block/scsi_ioctl.c b/block/scsi_ioctl.c
index c5b9bcfc0a6d..ec4b7f234626 100644
--- a/block/scsi_ioctl.c
+++ b/block/scsi_ioctl.c
@@ -105,12 +105,96 @@ static int sg_emulated_host(struct request_queue *q, int __user *p)
 	return put_user(1, p);
 }
 
+void blk_set_cmd_filter_defaults(struct blk_cmd_filter *filter)
+{
+	/* Basic read-only commands */
+	__set_bit(TEST_UNIT_READY, filter->read_ok);
+	__set_bit(REQUEST_SENSE, filter->read_ok);
+	__set_bit(READ_6, filter->read_ok);
+	__set_bit(READ_10, filter->read_ok);
+	__set_bit(READ_12, filter->read_ok);
+	__set_bit(READ_16, filter->read_ok);
+	__set_bit(READ_BUFFER, filter->read_ok);
+	__set_bit(READ_DEFECT_DATA, filter->read_ok);
+	__set_bit(READ_CAPACITY, filter->read_ok);
+	__set_bit(READ_LONG, filter->read_ok);
+	__set_bit(INQUIRY, filter->read_ok);
+	__set_bit(MODE_SENSE, filter->read_ok);
+	__set_bit(MODE_SENSE_10, filter->read_ok);
+	__set_bit(LOG_SENSE, filter->read_ok);
+	__set_bit(START_STOP, filter->read_ok);
+	__set_bit(GPCMD_VERIFY_10, filter->read_ok);
+	__set_bit(VERIFY_16, filter->read_ok);
+	__set_bit(REPORT_LUNS, filter->read_ok);
+	__set_bit(SERVICE_ACTION_IN, filter->read_ok);
+	__set_bit(RECEIVE_DIAGNOSTIC, filter->read_ok);
+	__set_bit(MAINTENANCE_IN, filter->read_ok);
+	__set_bit(GPCMD_READ_BUFFER_CAPACITY, filter->read_ok);
+
+	/* Audio CD commands */
+	__set_bit(GPCMD_PLAY_CD, filter->read_ok);
+	__set_bit(GPCMD_PLAY_AUDIO_10, filter->read_ok);
+	__set_bit(GPCMD_PLAY_AUDIO_MSF, filter->read_ok);
+	__set_bit(GPCMD_PLAY_AUDIO_TI, filter->read_ok);
+	__set_bit(GPCMD_PAUSE_RESUME, filter->read_ok);
+
+	/* CD/DVD data reading */
+	__set_bit(GPCMD_READ_CD, filter->read_ok);
+	__set_bit(GPCMD_READ_CD_MSF, filter->read_ok);
+	__set_bit(GPCMD_READ_DISC_INFO, filter->read_ok);
+	__set_bit(GPCMD_READ_CDVD_CAPACITY, filter->read_ok);
+	__set_bit(GPCMD_READ_DVD_STRUCTURE, filter->read_ok);
+	__set_bit(GPCMD_READ_HEADER, filter->read_ok);
+	__set_bit(GPCMD_READ_TRACK_RZONE_INFO, filter->read_ok);
+	__set_bit(GPCMD_READ_SUBCHANNEL, filter->read_ok);
+	__set_bit(GPCMD_READ_TOC_PMA_ATIP, filter->read_ok);
+	__set_bit(GPCMD_REPORT_KEY, filter->read_ok);
+	__set_bit(GPCMD_SCAN, filter->read_ok);
+	__set_bit(GPCMD_GET_CONFIGURATION, filter->read_ok);
+	__set_bit(GPCMD_READ_FORMAT_CAPACITIES, filter->read_ok);
+	__set_bit(GPCMD_GET_EVENT_STATUS_NOTIFICATION, filter->read_ok);
+	__set_bit(GPCMD_GET_PERFORMANCE, filter->read_ok);
+	__set_bit(GPCMD_SEEK, filter->read_ok);
+	__set_bit(GPCMD_STOP_PLAY_SCAN, filter->read_ok);
+
+	/* Basic writing commands */
+	__set_bit(WRITE_6, filter->write_ok);
+	__set_bit(WRITE_10, filter->write_ok);
+	__set_bit(WRITE_VERIFY, filter->write_ok);
+	__set_bit(WRITE_12, filter->write_ok);
+	__set_bit(WRITE_VERIFY_12, filter->write_ok);
+	__set_bit(WRITE_16, filter->write_ok);
+	__set_bit(WRITE_LONG, filter->write_ok);
+	__set_bit(WRITE_LONG_2, filter->write_ok);
+	__set_bit(ERASE, filter->write_ok);
+	__set_bit(GPCMD_MODE_SELECT_10, filter->write_ok);
+	__set_bit(MODE_SELECT, filter->write_ok);
+	__set_bit(LOG_SELECT, filter->write_ok);
+	__set_bit(GPCMD_BLANK, filter->write_ok);
+	__set_bit(GPCMD_CLOSE_TRACK, filter->write_ok);
+	__set_bit(GPCMD_FLUSH_CACHE, filter->write_ok);
+	__set_bit(GPCMD_FORMAT_UNIT, filter->write_ok);
+	__set_bit(GPCMD_REPAIR_RZONE_TRACK, filter->write_ok);
+	__set_bit(GPCMD_RESERVE_RZONE_TRACK, filter->write_ok);
+	__set_bit(GPCMD_SEND_DVD_STRUCTURE, filter->write_ok);
+	__set_bit(GPCMD_SEND_EVENT, filter->write_ok);
+	__set_bit(GPCMD_SEND_KEY, filter->write_ok);
+	__set_bit(GPCMD_SEND_OPC, filter->write_ok);
+	__set_bit(GPCMD_SEND_CUE_SHEET, filter->write_ok);
+	__set_bit(GPCMD_SET_SPEED, filter->write_ok);
+	__set_bit(GPCMD_PREVENT_ALLOW_MEDIUM_REMOVAL, filter->write_ok);
+	__set_bit(GPCMD_LOAD_UNLOAD, filter->write_ok);
+	__set_bit(GPCMD_SET_STREAMING, filter->write_ok);
+}
+EXPORT_SYMBOL_GPL(blk_set_cmd_filter_defaults);
+
 static int blk_fill_sghdr_rq(struct request_queue *q, struct request *rq,
 			     struct sg_io_hdr *hdr, struct file *file)
 {
 	if (copy_from_user(rq->cmd, hdr->cmdp, hdr->cmd_len))
 		return -EFAULT;
-	if (blk_verify_command(file, rq->cmd))
+	if (blk_verify_command(&q->cmd_filter, rq->cmd,
+			       file->f_mode & FMODE_WRITE))
 		return -EPERM;
 
 	/*
@@ -298,7 +382,7 @@ int sg_scsi_ioctl(struct file *file, struct request_queue *q,
 		  struct gendisk *disk, struct scsi_ioctl_command __user *sic)
 {
 	struct request *rq;
-	int err;
+	int err, write_perm = 0;
 	unsigned int in_len, out_len, bytes, opcode, cmdlen;
 	char *buffer = NULL, sense[SCSI_SENSE_BUFFERSIZE];
 
@@ -340,7 +424,11 @@ int sg_scsi_ioctl(struct file *file, struct request_queue *q,
 	if (in_len && copy_from_user(buffer, sic->data + cmdlen, in_len))
 		goto error;
 
-	err = blk_verify_command(file, rq->cmd);
+	/* scsi_ioctl passes NULL */
+	if (file && (file->f_mode & FMODE_WRITE))
+		write_perm = 1;
+
+	err = blk_verify_command(&q->cmd_filter, rq->cmd, write_perm);
 	if (err)
 		goto error;
 
@@ -518,7 +606,7 @@ int scsi_cmd_ioctl(struct file *file, struct request_queue *q,
 			hdr.sbp = cgc.sense;
 			if (hdr.sbp)
 				hdr.mx_sb_len = sizeof(struct request_sense);
-			hdr.timeout = cgc.timeout;
+			hdr.timeout = jiffies_to_msecs(cgc.timeout);
 			hdr.cmdp = ((struct cdrom_generic_command __user*) arg)->cmd;
 			hdr.cmd_len = sizeof(cgc.cmd);
 
diff --git a/crypto/async_tx/async_xor.c b/crypto/async_tx/async_xor.c
index 65974c6d3d7a..c029d3eb9ef0 100644
--- a/crypto/async_tx/async_xor.c
+++ b/crypto/async_tx/async_xor.c
@@ -263,11 +263,12 @@ async_xor_zero_sum(struct page *dest, struct page **src_list,
 		if (unlikely(!tx)) {
 			async_tx_quiesce(&depend_tx);
 
-			while (!tx)
+			while (!tx) {
 				dma_async_issue_pending(chan);
 				tx = device->device_prep_dma_zero_sum(chan,
 					dma_src, src_cnt, len, result,
 					dma_prep_flags);
+			}
 		}
 
 		async_tx_submit(chan, tx, flags, depend_tx, cb_fn, cb_param);
diff --git a/crypto/authenc.c b/crypto/authenc.c
index 4b226768752a..fd9f06c63d76 100644
--- a/crypto/authenc.c
+++ b/crypto/authenc.c
@@ -174,8 +174,9 @@ static int crypto_authenc_genicv(struct aead_request *req, u8 *iv,
 static void crypto_authenc_encrypt_done(struct crypto_async_request *req,
 					int err)
 {
+	struct aead_request *areq = req->data;
+
 	if (!err) {
-		struct aead_request *areq = req->data;
 		struct crypto_aead *authenc = crypto_aead_reqtfm(areq);
 		struct crypto_authenc_ctx *ctx = crypto_aead_ctx(authenc);
 		struct ablkcipher_request *abreq = aead_request_ctx(areq);
@@ -185,7 +186,7 @@ static void crypto_authenc_encrypt_done(struct crypto_async_request *req,
 		err = crypto_authenc_genicv(areq, iv, 0);
 	}
 
-	aead_request_complete(req->data, err);
+	aead_request_complete(areq, err);
 }
 
 static int crypto_authenc_encrypt(struct aead_request *req)
@@ -216,14 +217,15 @@ static int crypto_authenc_encrypt(struct aead_request *req)
 static void crypto_authenc_givencrypt_done(struct crypto_async_request *req,
 					   int err)
 {
+	struct aead_request *areq = req->data;
+
 	if (!err) {
-		struct aead_request *areq = req->data;
 		struct skcipher_givcrypt_request *greq = aead_request_ctx(areq);
 
 		err = crypto_authenc_genicv(areq, greq->giv, 0);
 	}
 
-	aead_request_complete(req->data, err);
+	aead_request_complete(areq, err);
 }
 
 static int crypto_authenc_givencrypt(struct aead_givcrypt_request *req)
diff --git a/crypto/digest.c b/crypto/digest.c
index ac0919460d14..5d3f1303da98 100644
--- a/crypto/digest.c
+++ b/crypto/digest.c
@@ -225,7 +225,7 @@ int crypto_init_digest_ops_async(struct crypto_tfm *tfm)
 	struct ahash_tfm  *crt  = &tfm->crt_ahash;
 	struct digest_alg *dalg = &tfm->__crt_alg->cra_digest;
 
-	if (dalg->dia_digestsize > crypto_tfm_alg_blocksize(tfm))
+	if (dalg->dia_digestsize > PAGE_SIZE / 8)
 		return -EINVAL;
 
 	crt->init       = digest_async_init;
diff --git a/crypto/tcrypt.c b/crypto/tcrypt.c
index 59821a22d752..66368022e0bf 100644
--- a/crypto/tcrypt.c
+++ b/crypto/tcrypt.c
@@ -481,21 +481,31 @@ next_one:
 
 			for (k = 0, temp = 0; k < template[i].np; k++) {
 				printk(KERN_INFO "page %u\n", k);
-				q = &axbuf[IDX[k]];
-				hexdump(q, template[i].tap[k]);
+				q = &xbuf[IDX[k]];
+
+				n = template[i].tap[k];
+				if (k == template[i].np - 1)
+					n += enc ? authsize : -authsize;
+				hexdump(q, n);
 				printk(KERN_INFO "%s\n",
-				       memcmp(q, template[i].result + temp,
-					      template[i].tap[k] -
-					      (k < template[i].np - 1 || enc ?
-					       0 : authsize)) ?
+				       memcmp(q, template[i].result + temp, n) ?
 				       "fail" : "pass");
 
-				for (n = 0; q[template[i].tap[k] + n]; n++)
-					;
+				q += n;
+				if (k == template[i].np - 1 && !enc) {
+					if (memcmp(q, template[i].input +
+						      temp + n, authsize))
+						n = authsize;
+					else
+						n = 0;
+				} else {
+					for (n = 0; q[n]; n++)
+						;
+				}
 				if (n) {
 					printk("Result buffer corruption %u "
 					       "bytes:\n", n);
-					hexdump(&q[template[i].tap[k]], n);
+					hexdump(q, n);
 				}
 
 				temp += template[i].tap[k];
diff --git a/drivers/Makefile b/drivers/Makefile
index 808e0ae66aa8..2735bde73475 100644
--- a/drivers/Makefile
+++ b/drivers/Makefile
@@ -5,7 +5,7 @@
 # Rewritten to use lists instead of if-statements.
 #
 
-obj-$(CONFIG_HAVE_GPIO_LIB)	+= gpio/
+obj-y				+= gpio/
 obj-$(CONFIG_PCI)		+= pci/
 obj-$(CONFIG_PARISC)		+= parisc/
 obj-$(CONFIG_RAPIDIO)		+= rapidio/
@@ -57,6 +57,7 @@ obj-$(CONFIG_ATA_OVER_ETH)	+= block/aoe/
 obj-$(CONFIG_PARIDE) 		+= block/paride/
 obj-$(CONFIG_TC)		+= tc/
 obj-$(CONFIG_USB)		+= usb/
+obj-$(CONFIG_USB_MUSB_HDRC)	+= usb/musb/
 obj-$(CONFIG_PCI)		+= usb/
 obj-$(CONFIG_USB_GADGET)	+= usb/gadget/
 obj-$(CONFIG_SERIO)		+= input/serio/
@@ -97,3 +98,4 @@ obj-$(CONFIG_PPC_PS3)		+= ps3/
 obj-$(CONFIG_OF)		+= of/
 obj-$(CONFIG_SSB)		+= ssb/
 obj-$(CONFIG_VIRTIO)		+= virtio/
+obj-$(CONFIG_REGULATOR)		+= regulator/
diff --git a/drivers/acpi/asus_acpi.c b/drivers/acpi/asus_acpi.c
index 44ad90c03c2e..d3d0886d637f 100644
--- a/drivers/acpi/asus_acpi.c
+++ b/drivers/acpi/asus_acpi.c
@@ -78,9 +78,9 @@ MODULE_LICENSE("GPL");
 static uid_t asus_uid;
 static gid_t asus_gid;
 module_param(asus_uid, uint, 0);
-MODULE_PARM_DESC(asus_uid, "UID for entries in /proc/acpi/asus.\n");
+MODULE_PARM_DESC(asus_uid, "UID for entries in /proc/acpi/asus");
 module_param(asus_gid, uint, 0);
-MODULE_PARM_DESC(asus_gid, "GID for entries in /proc/acpi/asus.\n");
+MODULE_PARM_DESC(asus_gid, "GID for entries in /proc/acpi/asus");
 
 /* For each model, all features implemented, 
  * those marked with R are relative to HOTK, A for absolute */
diff --git a/drivers/acpi/dock.c b/drivers/acpi/dock.c
index bb7c51f712bd..7d2edf143f16 100644
--- a/drivers/acpi/dock.c
+++ b/drivers/acpi/dock.c
@@ -563,9 +563,6 @@ EXPORT_SYMBOL_GPL(unregister_hotplug_dock_device);
  */
 static int handle_eject_request(struct dock_station *ds, u32 event)
 {
-	if (!dock_present(ds))
-		return -ENODEV;
-
 	if (dock_in_progress(ds))
 		return -EBUSY;
 
@@ -573,8 +570,16 @@ static int handle_eject_request(struct dock_station *ds, u32 event)
 	 * here we need to generate the undock
 	 * event prior to actually doing the undock
 	 * so that the device struct still exists.
+	 * Also, even send the dock event if the
+	 * device is not present anymore
 	 */
 	dock_event(ds, event, UNDOCK_EVENT);
+
+	if (!dock_present(ds)) {
+		complete_undock(ds);
+		return -ENODEV;
+	}
+
 	hotplug_dock_devices(ds, ACPI_NOTIFY_EJECT_REQUEST);
 	undock(ds);
 	eject_dock(ds);
diff --git a/drivers/acpi/ec.c b/drivers/acpi/ec.c
index 5622aee996b2..13593f9f2197 100644
--- a/drivers/acpi/ec.c
+++ b/drivers/acpi/ec.c
@@ -110,6 +110,31 @@ static struct acpi_ec {
 	u8 handlers_installed;
 } *boot_ec, *first_ec;
 
+/* 
+ * Some Asus system have exchanged ECDT data/command IO addresses.
+ */
+static int print_ecdt_error(const struct dmi_system_id *id)
+{
+	printk(KERN_NOTICE PREFIX "%s detected - "
+		"ECDT has exchanged control/data I/O address\n",
+		id->ident);
+	return 0;
+}
+
+static struct dmi_system_id __cpuinitdata ec_dmi_table[] = {
+	{
+	print_ecdt_error, "Asus L4R", {
+	DMI_MATCH(DMI_BIOS_VERSION, "1008.006"),
+	DMI_MATCH(DMI_PRODUCT_NAME, "L4R"),
+	DMI_MATCH(DMI_BOARD_NAME, "L4R") }, NULL},
+	{
+	print_ecdt_error, "Asus M6R", {
+	DMI_MATCH(DMI_BIOS_VERSION, "0207"),
+	DMI_MATCH(DMI_PRODUCT_NAME, "M6R"),
+	DMI_MATCH(DMI_BOARD_NAME, "M6R") }, NULL},
+	{},
+};
+
 /* --------------------------------------------------------------------------
                              Transaction Management
    -------------------------------------------------------------------------- */
@@ -196,6 +221,8 @@ static int acpi_ec_wait(struct acpi_ec *ec, enum ec_event event, int force_poll)
 				return 0;
 			msleep(1);
 		}
+		if (acpi_ec_check_status(ec,event))
+			return 0;
 	}
 	pr_err(PREFIX "acpi_ec_wait timeout, status = 0x%2.2x, event = %s\n",
 		acpi_ec_read_status(ec),
@@ -911,6 +938,15 @@ int __init acpi_ec_ecdt_probe(void)
 		pr_info(PREFIX "EC description table is found, configuring boot EC\n");
 		boot_ec->command_addr = ecdt_ptr->control.address;
 		boot_ec->data_addr = ecdt_ptr->data.address;
+		if (dmi_check_system(ec_dmi_table)) {
+			/*
+			 * If the board falls into ec_dmi_table, it means
+			 * that ECDT table gives the incorrect command/status
+			 * & data I/O address. Just fix it.
+			 */
+			boot_ec->data_addr = ecdt_ptr->control.address;
+			boot_ec->command_addr = ecdt_ptr->data.address;
+		}
 		boot_ec->gpe = ecdt_ptr->gpe;
 		boot_ec->handle = ACPI_ROOT_OBJECT;
 		acpi_get_handle(ACPI_ROOT_OBJECT, ecdt_ptr->id, &boot_ec->handle);
diff --git a/drivers/acpi/executer/exconfig.c b/drivers/acpi/executer/exconfig.c
index 2a32c843cb4a..8892b9824fae 100644
--- a/drivers/acpi/executer/exconfig.c
+++ b/drivers/acpi/executer/exconfig.c
@@ -479,5 +479,8 @@ acpi_status acpi_ex_unload_table(union acpi_operand_object *ddb_handle)
 
 	acpi_tb_set_table_loaded_flag(table_index, FALSE);
 
+	/* Table unloaded, remove a reference to the ddb_handle object */
+
+	acpi_ut_remove_reference(ddb_handle);
 	return_ACPI_STATUS(AE_OK);
 }
diff --git a/drivers/acpi/namespace/nsnames.c b/drivers/acpi/namespace/nsnames.c
index 549db42f16cf..bd5773878009 100644
--- a/drivers/acpi/namespace/nsnames.c
+++ b/drivers/acpi/namespace/nsnames.c
@@ -56,13 +56,14 @@ ACPI_MODULE_NAME("nsnames")
  *              Size            - Size of the pathname
  *              *name_buffer    - Where to return the pathname
  *
- * RETURN:      Places the pathname into the name_buffer, in external format
+ * RETURN:      Status
+ *              Places the pathname into the name_buffer, in external format
  *              (name segments separated by path separators)
  *
  * DESCRIPTION: Generate a full pathaname
  *
  ******************************************************************************/
-void
+acpi_status
 acpi_ns_build_external_path(struct acpi_namespace_node *node,
 			    acpi_size size, char *name_buffer)
 {
@@ -77,7 +78,7 @@ acpi_ns_build_external_path(struct acpi_namespace_node *node,
 	if (index < ACPI_NAME_SIZE) {
 		name_buffer[0] = AML_ROOT_PREFIX;
 		name_buffer[1] = 0;
-		return;
+		return (AE_OK);
 	}
 
 	/* Store terminator byte, then build name backwards */
@@ -105,11 +106,13 @@ acpi_ns_build_external_path(struct acpi_namespace_node *node,
 
 	if (index != 0) {
 		ACPI_ERROR((AE_INFO,
-			    "Could not construct pathname; index=%X, size=%X, Path=%s",
+			    "Could not construct external pathname; index=%X, size=%X, Path=%s",
 			    (u32) index, (u32) size, &name_buffer[size]));
+
+		return (AE_BAD_PARAMETER);
 	}
 
-	return;
+	return (AE_OK);
 }
 
 #ifdef ACPI_DEBUG_OUTPUT
@@ -129,6 +132,7 @@ acpi_ns_build_external_path(struct acpi_namespace_node *node,
 
 char *acpi_ns_get_external_pathname(struct acpi_namespace_node *node)
 {
+	acpi_status status;
 	char *name_buffer;
 	acpi_size size;
 
@@ -138,8 +142,7 @@ char *acpi_ns_get_external_pathname(struct acpi_namespace_node *node)
 
 	size = acpi_ns_get_pathname_length(node);
 	if (!size) {
-		ACPI_ERROR((AE_INFO, "Invalid node failure"));
-		return_PTR(NULL);
+		return (NULL);
 	}
 
 	/* Allocate a buffer to be returned to caller */
@@ -152,7 +155,11 @@ char *acpi_ns_get_external_pathname(struct acpi_namespace_node *node)
 
 	/* Build the path in the allocated buffer */
 
-	acpi_ns_build_external_path(node, size, name_buffer);
+	status = acpi_ns_build_external_path(node, size, name_buffer);
+	if (ACPI_FAILURE(status)) {
+		return (NULL);
+	}
+
 	return_PTR(name_buffer);
 }
 #endif
@@ -186,7 +193,7 @@ acpi_size acpi_ns_get_pathname_length(struct acpi_namespace_node *node)
 	while (next_node && (next_node != acpi_gbl_root_node)) {
 		if (ACPI_GET_DESCRIPTOR_TYPE(next_node) != ACPI_DESC_TYPE_NAMED) {
 			ACPI_ERROR((AE_INFO,
-				    "Invalid NS Node (%p) while traversing path",
+				    "Invalid Namespace Node (%p) while traversing namespace",
 				    next_node));
 			return 0;
 		}
@@ -234,8 +241,7 @@ acpi_ns_handle_to_pathname(acpi_handle target_handle,
 
 	required_size = acpi_ns_get_pathname_length(node);
 	if (!required_size) {
-		ACPI_ERROR((AE_INFO, "Invalid node failure"));
-		return_ACPI_STATUS(AE_ERROR);
+		return_ACPI_STATUS(AE_BAD_PARAMETER);
 	}
 
 	/* Validate/Allocate/Clear caller buffer */
@@ -247,7 +253,11 @@ acpi_ns_handle_to_pathname(acpi_handle target_handle,
 
 	/* Build the path in the caller buffer */
 
-	acpi_ns_build_external_path(node, required_size, buffer->pointer);
+	status =
+	    acpi_ns_build_external_path(node, required_size, buffer->pointer);
+	if (ACPI_FAILURE(status)) {
+		return_ACPI_STATUS(status);
+	}
 
 	ACPI_DEBUG_PRINT((ACPI_DB_EXEC, "%s [%X]\n",
 			  (char *)buffer->pointer, (u32) required_size));
diff --git a/drivers/acpi/pci_link.c b/drivers/acpi/pci_link.c
index 89f3b2abfdc7..cf47805a7448 100644
--- a/drivers/acpi/pci_link.c
+++ b/drivers/acpi/pci_link.c
@@ -849,7 +849,7 @@ static int __init acpi_irq_penalty_update(char *str, int used)
 		if (irq < 0)
 			continue;
 
-		if (irq >= ACPI_MAX_IRQS)
+		if (irq >= ARRAY_SIZE(acpi_irq_penalty))
 			continue;
 
 		if (used)
@@ -872,10 +872,12 @@ static int __init acpi_irq_penalty_update(char *str, int used)
  */
 void acpi_penalize_isa_irq(int irq, int active)
 {
-	if (active)
-		acpi_irq_penalty[irq] += PIRQ_PENALTY_ISA_USED;
-	else
-		acpi_irq_penalty[irq] += PIRQ_PENALTY_PCI_USING;
+	if (irq >= 0 && irq < ARRAY_SIZE(acpi_irq_penalty)) {
+		if (active)
+			acpi_irq_penalty[irq] += PIRQ_PENALTY_ISA_USED;
+		else
+			acpi_irq_penalty[irq] += PIRQ_PENALTY_PCI_USING;
+	}
 }
 
 /*
diff --git a/drivers/acpi/pci_slot.c b/drivers/acpi/pci_slot.c
index dd376f7ad090..d5b4ef898879 100644
--- a/drivers/acpi/pci_slot.c
+++ b/drivers/acpi/pci_slot.c
@@ -76,9 +76,9 @@ static struct acpi_pci_driver acpi_pci_slot_driver = {
 };
 
 static int
-check_slot(acpi_handle handle, int *device, unsigned long *sun)
+check_slot(acpi_handle handle, unsigned long *sun)
 {
-	int retval = 0;
+	int device = -1;
 	unsigned long adr, sta;
 	acpi_status status;
 	struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL };
@@ -89,32 +89,27 @@ check_slot(acpi_handle handle, int *device, unsigned long *sun)
 	if (check_sta_before_sun) {
 		/* If SxFy doesn't have _STA, we just assume it's there */
 		status = acpi_evaluate_integer(handle, "_STA", NULL, &sta);
-		if (ACPI_SUCCESS(status) && !(sta & ACPI_STA_DEVICE_PRESENT)) {
-			retval = -1;
+		if (ACPI_SUCCESS(status) && !(sta & ACPI_STA_DEVICE_PRESENT))
 			goto out;
-		}
 	}
 
 	status = acpi_evaluate_integer(handle, "_ADR", NULL, &adr);
 	if (ACPI_FAILURE(status)) {
 		dbg("_ADR returned %d on %s\n", status, (char *)buffer.pointer);
-		retval = -1;
 		goto out;
 	}
 
-	*device = (adr >> 16) & 0xffff;
-
 	/* No _SUN == not a slot == bail */
 	status = acpi_evaluate_integer(handle, "_SUN", NULL, sun);
 	if (ACPI_FAILURE(status)) {
 		dbg("_SUN returned %d on %s\n", status, (char *)buffer.pointer);
-		retval = -1;
 		goto out;
 	}
 
+	device = (adr >> 16) & 0xffff;
 out:
 	kfree(buffer.pointer);
-	return retval;
+	return device;
 }
 
 struct callback_args {
@@ -144,7 +139,8 @@ register_slot(acpi_handle handle, u32 lvl, void *context, void **rv)
 	struct callback_args *parent_context = context;
 	struct pci_bus *pci_bus = parent_context->pci_bus;
 
-	if (check_slot(handle, &device, &sun))
+	device = check_slot(handle, &sun);
+	if (device < 0)
 		return AE_OK;
 
 	slot = kmalloc(sizeof(*slot), GFP_KERNEL);
diff --git a/drivers/acpi/processor_core.c b/drivers/acpi/processor_core.c
index e36422a7122c..ee68ac54c0d4 100644
--- a/drivers/acpi/processor_core.c
+++ b/drivers/acpi/processor_core.c
@@ -123,7 +123,7 @@ struct acpi_processor_errata errata __read_mostly;
 static int set_no_mwait(const struct dmi_system_id *id)
 {
 	printk(KERN_NOTICE PREFIX "%s detected - "
-		"disable mwait for CPU C-stetes\n", id->ident);
+		"disabling mwait for CPU C-states\n", id->ident);
 	idle_nomwait = 1;
 	return 0;
 }
@@ -138,7 +138,7 @@ static struct dmi_system_id __cpuinitdata processor_idle_dmi_table[] = {
 	{
 	set_no_mwait, "Extensa 5220", {
 	DMI_MATCH(DMI_BIOS_VENDOR, "Phoenix Technologies LTD"),
-	DMI_MATCH(DMI_SYS_VENDOR, "ACER"),
+	DMI_MATCH(DMI_SYS_VENDOR, "Acer"),
 	DMI_MATCH(DMI_PRODUCT_VERSION, "0100"),
 	DMI_MATCH(DMI_BOARD_NAME, "Columbia") }, NULL},
 	{},
diff --git a/drivers/acpi/processor_idle.c b/drivers/acpi/processor_idle.c
index d592dbb1d12a..cf5b1b7b684f 100644
--- a/drivers/acpi/processor_idle.c
+++ b/drivers/acpi/processor_idle.c
@@ -41,7 +41,6 @@
 #include <linux/pm_qos_params.h>
 #include <linux/clockchips.h>
 #include <linux/cpuidle.h>
-#include <linux/cpuidle.h>
 
 /*
  * Include the apic definitions for x86 to have the APIC timer related defines
@@ -272,6 +271,8 @@ static atomic_t c3_cpu_count;
 /* Common C-state entry for C2, C3, .. */
 static void acpi_cstate_enter(struct acpi_processor_cx *cstate)
 {
+	/* Don't trace irqs off for idle */
+	stop_critical_timings();
 	if (cstate->entry_method == ACPI_CSTATE_FFH) {
 		/* Call into architectural FFH based C-state */
 		acpi_processor_ffh_cstate_enter(cstate);
@@ -284,6 +285,7 @@ static void acpi_cstate_enter(struct acpi_processor_cx *cstate)
 		   gets asserted in time to freeze execution properly. */
 		unused = inl(acpi_gbl_FADT.xpm_timer_block.address);
 	}
+	start_critical_timings();
 }
 #endif /* !CONFIG_CPU_IDLE */
 
@@ -1329,9 +1331,15 @@ int acpi_processor_cst_has_changed(struct acpi_processor *pr)
 	if (!pr->flags.power_setup_done)
 		return -ENODEV;
 
-	/* Fall back to the default idle loop */
-	pm_idle = pm_idle_save;
-	synchronize_sched();	/* Relies on interrupts forcing exit from idle. */
+	/*
+	 * Fall back to the default idle loop, when pm_idle_save had
+	 * been initialized.
+	 */
+	if (pm_idle_save) {
+		pm_idle = pm_idle_save;
+		/* Relies on interrupts forcing exit from idle. */
+		synchronize_sched();
+	}
 
 	pr->flags.power = 0;
 	result = acpi_processor_get_power_info(pr);
@@ -1418,6 +1426,8 @@ static inline void acpi_idle_update_bm_rld(struct acpi_processor *pr,
  */
 static inline void acpi_idle_do_entry(struct acpi_processor_cx *cx)
 {
+	/* Don't trace irqs off for idle */
+	stop_critical_timings();
 	if (cx->entry_method == ACPI_CSTATE_FFH) {
 		/* Call into architectural FFH based C-state */
 		acpi_processor_ffh_cstate_enter(cx);
@@ -1432,6 +1442,7 @@ static inline void acpi_idle_do_entry(struct acpi_processor_cx *cx)
 		   gets asserted in time to freeze execution properly. */
 		unused = inl(acpi_gbl_FADT.xpm_timer_block.address);
 	}
+	start_critical_timings();
 }
 
 /**
@@ -1890,7 +1901,8 @@ int acpi_processor_power_exit(struct acpi_processor *pr,
 
 	/* Unregister the idle handler when processor #0 is removed. */
 	if (pr->id == 0) {
-		pm_idle = pm_idle_save;
+		if (pm_idle_save)
+			pm_idle = pm_idle_save;
 
 		/*
 		 * We are about to unload the current idle thread pm callback
diff --git a/drivers/acpi/processor_perflib.c b/drivers/acpi/processor_perflib.c
index b4749969c6b4..80e32093e977 100644
--- a/drivers/acpi/processor_perflib.c
+++ b/drivers/acpi/processor_perflib.c
@@ -64,7 +64,13 @@ static DEFINE_MUTEX(performance_mutex);
  * policy is adjusted accordingly.
  */
 
-static unsigned int ignore_ppc = 0;
+/* ignore_ppc:
+ * -1 -> cpufreq low level drivers not initialized -> _PSS, etc. not called yet
+ *       ignore _PPC
+ *  0 -> cpufreq low level drivers initialized -> consider _PPC values
+ *  1 -> ignore _PPC totally -> forced by user through boot param
+ */
+static int ignore_ppc = -1;
 module_param(ignore_ppc, uint, 0644);
 MODULE_PARM_DESC(ignore_ppc, "If the frequency of your machine gets wrongly" \
 		 "limited by BIOS, this should help");
@@ -72,7 +78,7 @@ MODULE_PARM_DESC(ignore_ppc, "If the frequency of your machine gets wrongly" \
 #define PPC_REGISTERED   1
 #define PPC_IN_USE       2
 
-static int acpi_processor_ppc_status = 0;
+static int acpi_processor_ppc_status;
 
 static int acpi_processor_ppc_notifier(struct notifier_block *nb,
 				       unsigned long event, void *data)
@@ -81,13 +87,18 @@ static int acpi_processor_ppc_notifier(struct notifier_block *nb,
 	struct acpi_processor *pr;
 	unsigned int ppc = 0;
 
-	if (ignore_ppc)
+	if (event == CPUFREQ_START && ignore_ppc <= 0) {
+		ignore_ppc = 0;
 		return 0;
+	}
 
-	mutex_lock(&performance_mutex);
+	if (ignore_ppc)
+		return 0;
 
 	if (event != CPUFREQ_INCOMPATIBLE)
-		goto out;
+		return 0;
+
+	mutex_lock(&performance_mutex);
 
 	pr = per_cpu(processors, policy->cpu);
 	if (!pr || !pr->performance)
diff --git a/drivers/acpi/processor_throttling.c b/drivers/acpi/processor_throttling.c
index a2c3f9cfa549..a56fc6c4394b 100644
--- a/drivers/acpi/processor_throttling.c
+++ b/drivers/acpi/processor_throttling.c
@@ -827,7 +827,6 @@ static int acpi_processor_get_throttling_ptc(struct acpi_processor *pr)
 static int acpi_processor_get_throttling(struct acpi_processor *pr)
 {
 	cpumask_t saved_mask;
-	cpumask_of_cpu_ptr_declare(new_mask);
 	int ret;
 
 	if (!pr)
@@ -839,8 +838,7 @@ static int acpi_processor_get_throttling(struct acpi_processor *pr)
 	 * Migrate task to the cpu pointed by pr.
 	 */
 	saved_mask = current->cpus_allowed;
-	cpumask_of_cpu_ptr_next(new_mask, pr->id);
-	set_cpus_allowed_ptr(current, new_mask);
+	set_cpus_allowed_ptr(current, &cpumask_of_cpu(pr->id));
 	ret = pr->throttling.acpi_processor_get_throttling(pr);
 	/* restore the previous state */
 	set_cpus_allowed_ptr(current, &saved_mask);
@@ -989,7 +987,6 @@ static int acpi_processor_set_throttling_ptc(struct acpi_processor *pr,
 int acpi_processor_set_throttling(struct acpi_processor *pr, int state)
 {
 	cpumask_t saved_mask;
-	cpumask_of_cpu_ptr_declare(new_mask);
 	int ret = 0;
 	unsigned int i;
 	struct acpi_processor *match_pr;
@@ -1028,8 +1025,7 @@ int acpi_processor_set_throttling(struct acpi_processor *pr, int state)
 	 * it can be called only for the cpu pointed by pr.
 	 */
 	if (p_throttling->shared_type == DOMAIN_COORD_TYPE_SW_ANY) {
-		cpumask_of_cpu_ptr_next(new_mask, pr->id);
-		set_cpus_allowed_ptr(current, new_mask);
+		set_cpus_allowed_ptr(current, &cpumask_of_cpu(pr->id));
 		ret = p_throttling->acpi_processor_set_throttling(pr,
 						t_state.target_state);
 	} else {
@@ -1060,8 +1056,7 @@ int acpi_processor_set_throttling(struct acpi_processor *pr, int state)
 				continue;
 			}
 			t_state.cpu = i;
-			cpumask_of_cpu_ptr_next(new_mask, i);
-			set_cpus_allowed_ptr(current, new_mask);
+			set_cpus_allowed_ptr(current, &cpumask_of_cpu(i));
 			ret = match_pr->throttling.
 				acpi_processor_set_throttling(
 				match_pr, t_state.target_state);
diff --git a/drivers/acpi/resources/rscalc.c b/drivers/acpi/resources/rscalc.c
index f61ebc679e66..d9063ea414e3 100644
--- a/drivers/acpi/resources/rscalc.c
+++ b/drivers/acpi/resources/rscalc.c
@@ -587,6 +587,9 @@ acpi_rs_get_pci_routing_table_length(union acpi_operand_object *package_object,
 			} else {
 				temp_size_needed +=
 				    acpi_ns_get_pathname_length((*sub_object_list)->reference.node);
+				if (!temp_size_needed) {
+					return_ACPI_STATUS(AE_BAD_PARAMETER);
+				}
 			}
 		} else {
 			/*
diff --git a/drivers/acpi/utilities/utalloc.c b/drivers/acpi/utilities/utalloc.c
index e7bf34a7b1d2..7dcb67e0b215 100644
--- a/drivers/acpi/utilities/utalloc.c
+++ b/drivers/acpi/utilities/utalloc.c
@@ -242,10 +242,12 @@ acpi_ut_initialize_buffer(struct acpi_buffer * buffer,
 {
 	acpi_status status = AE_OK;
 
-	if (!required_length) {
-		WARN_ON(1);
-		return AE_ERROR;
+	/* Parameter validation */
+
+	if (!buffer || !required_length) {
+		return (AE_BAD_PARAMETER);
 	}
+
 	switch (buffer->length) {
 	case ACPI_NO_BUFFER:
 
diff --git a/drivers/acpi/utilities/utdelete.c b/drivers/acpi/utilities/utdelete.c
index c5c791a575c9..42609d3a8aa9 100644
--- a/drivers/acpi/utilities/utdelete.c
+++ b/drivers/acpi/utilities/utdelete.c
@@ -135,6 +135,10 @@ static void acpi_ut_delete_internal_obj(union acpi_operand_object *object)
 		obj_pointer = object->package.elements;
 		break;
 
+		/*
+		 * These objects have a possible list of notify handlers.
+		 * Device object also may have a GPE block.
+		 */
 	case ACPI_TYPE_DEVICE:
 
 		if (object->device.gpe_block) {
@@ -142,9 +146,14 @@ static void acpi_ut_delete_internal_obj(union acpi_operand_object *object)
 						       gpe_block);
 		}
 
-		/* Walk the handler list for this device */
+		/*lint -fallthrough */
+
+	case ACPI_TYPE_PROCESSOR:
+	case ACPI_TYPE_THERMAL:
+
+		/* Walk the notify handler list for this object */
 
-		handler_desc = object->device.handler;
+		handler_desc = object->common_notify.handler;
 		while (handler_desc) {
 			next_desc = handler_desc->address_space.next;
 			acpi_ut_remove_reference(handler_desc);
diff --git a/drivers/acpi/utilities/utobject.c b/drivers/acpi/utilities/utobject.c
index e25484495e65..916eff399eb3 100644
--- a/drivers/acpi/utilities/utobject.c
+++ b/drivers/acpi/utilities/utobject.c
@@ -425,6 +425,7 @@ acpi_ut_get_simple_object_size(union acpi_operand_object *internal_object,
 			       acpi_size * obj_length)
 {
 	acpi_size length;
+	acpi_size size;
 	acpi_status status = AE_OK;
 
 	ACPI_FUNCTION_TRACE_PTR(ut_get_simple_object_size, internal_object);
@@ -484,10 +485,14 @@ acpi_ut_get_simple_object_size(union acpi_operand_object *internal_object,
 			 * Get the actual length of the full pathname to this object.
 			 * The reference will be converted to the pathname to the object
 			 */
-			length +=
-			    ACPI_ROUND_UP_TO_NATIVE_WORD
-			    (acpi_ns_get_pathname_length
-			     (internal_object->reference.node));
+			size =
+			    acpi_ns_get_pathname_length(internal_object->
+							reference.node);
+			if (!size) {
+				return_ACPI_STATUS(AE_BAD_PARAMETER);
+			}
+
+			length += ACPI_ROUND_UP_TO_NATIVE_WORD(size);
 			break;
 
 		default:
diff --git a/drivers/acpi/wmi.c b/drivers/acpi/wmi.c
index c33b1c6e93b1..cfe2c833474d 100644
--- a/drivers/acpi/wmi.c
+++ b/drivers/acpi/wmi.c
@@ -347,7 +347,7 @@ struct acpi_buffer *out)
 	strcpy(method, "WQ");
 	strncat(method, block->object_id, 2);
 
-	status = acpi_evaluate_object(handle, method, NULL, out);
+	status = acpi_evaluate_object(handle, method, &input, out);
 
 	/*
 	 * If ACPI_WMI_EXPENSIVE, call the relevant WCxx method, even if
diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c
index dc7596f028b6..c729e6988bbb 100644
--- a/drivers/ata/ahci.c
+++ b/drivers/ata/ahci.c
@@ -486,6 +486,8 @@ static const struct pci_device_id ahci_pci_tbl[] = {
 	{ PCI_VDEVICE(INTEL, 0x502b), board_ahci }, /* Tolapai */
 	{ PCI_VDEVICE(INTEL, 0x3a05), board_ahci }, /* ICH10 */
 	{ PCI_VDEVICE(INTEL, 0x3a25), board_ahci }, /* ICH10 */
+	{ PCI_VDEVICE(INTEL, 0x3b24), board_ahci }, /* PCH RAID */
+	{ PCI_VDEVICE(INTEL, 0x3b2b), board_ahci }, /* PCH RAID */
 
 	/* JMicron 360/1/3/5/6, match class to avoid IDE function */
 	{ PCI_VENDOR_ID_JMICRON, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID,
@@ -575,9 +577,9 @@ static const struct pci_device_id ahci_pci_tbl[] = {
 	{ PCI_VDEVICE(NVIDIA, 0x0bc7), board_ahci },		/* MCP7B */
 
 	/* SiS */
-	{ PCI_VDEVICE(SI, 0x1184), board_ahci_nopmp },		/* SiS 966 */
-	{ PCI_VDEVICE(SI, 0x1185), board_ahci_nopmp },		/* SiS 968 */
-	{ PCI_VDEVICE(SI, 0x0186), board_ahci_nopmp },		/* SiS 968 */
+	{ PCI_VDEVICE(SI, 0x1184), board_ahci },		/* SiS 966 */
+	{ PCI_VDEVICE(SI, 0x1185), board_ahci },		/* SiS 968 */
+	{ PCI_VDEVICE(SI, 0x0186), board_ahci },		/* SiS 968 */
 
 	/* Marvell */
 	{ PCI_VDEVICE(MARVELL, 0x6145), board_ahci_mv },	/* 6145 */
@@ -1273,7 +1275,7 @@ static ssize_t ahci_transmit_led_message(struct ata_port *ap, u32 state,
 	void __iomem *mmio = ap->host->iomap[AHCI_PCI_BAR];
 	u32 em_ctl;
 	u32 message[] = {0, 0};
-	unsigned int flags;
+	unsigned long flags;
 	int pmp;
 	struct ahci_em_priv *emp;
 
diff --git a/drivers/ata/ata_piix.c b/drivers/ata/ata_piix.c
index a90ae03f56b2..b1d08a8f5003 100644
--- a/drivers/ata/ata_piix.c
+++ b/drivers/ata/ata_piix.c
@@ -250,6 +250,7 @@ static const struct pci_device_id piix_pci_tbl[] = {
 	/* Mobile SATA Controller IDE (ICH8M), Apple */
 	{ 0x8086, 0x2828, 0x106b, 0x00a0, 0, 0, ich8m_apple_sata },
 	{ 0x8086, 0x2828, 0x106b, 0x00a1, 0, 0, ich8m_apple_sata },
+	{ 0x8086, 0x2828, 0x106b, 0x00a3, 0, 0, ich8m_apple_sata },
 	/* Mobile SATA Controller IDE (ICH8M) */
 	{ 0x8086, 0x2828, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata },
 	/* SATA Controller IDE (ICH9) */
@@ -274,6 +275,14 @@ static const struct pci_device_id piix_pci_tbl[] = {
 	{ 0x8086, 0x3a20, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata },
 	/* SATA Controller IDE (ICH10) */
 	{ 0x8086, 0x3a26, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_2port_sata },
+	/* SATA Controller IDE (PCH) */
+	{ 0x8086, 0x3b20, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata },
+	/* SATA Controller IDE (PCH) */
+	{ 0x8086, 0x3b26, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_2port_sata },
+	/* SATA Controller IDE (PCH) */
+	{ 0x8086, 0x3b2d, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_2port_sata },
+	/* SATA Controller IDE (PCH) */
+	{ 0x8086, 0x3b2e, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata },
 
 	{ }	/* terminate list */
 };
diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
index 9bef1a84fe3f..79e3a8e7a84a 100644
--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -104,6 +104,7 @@ struct ata_force_param {
 	unsigned long	xfer_mask;
 	unsigned int	horkage_on;
 	unsigned int	horkage_off;
+	unsigned int	lflags;
 };
 
 struct ata_force_ent {
@@ -120,7 +121,7 @@ static char ata_force_param_buf[PAGE_SIZE] __initdata;
 module_param_string(force, ata_force_param_buf, sizeof(ata_force_param_buf), 0);
 MODULE_PARM_DESC(force, "Force ATA configurations including cable type, link speed and transfer mode (see Documentation/kernel-parameters.txt for details)");
 
-int atapi_enabled = 1;
+static int atapi_enabled = 1;
 module_param(atapi_enabled, int, 0444);
 MODULE_PARM_DESC(atapi_enabled, "Enable discovery of ATAPI devices (0=off, 1=on)");
 
@@ -196,22 +197,23 @@ void ata_force_cbl(struct ata_port *ap)
 }
 
 /**
- *	ata_force_spd_limit - force SATA spd limit according to libata.force
+ *	ata_force_link_limits - force link limits according to libata.force
  *	@link: ATA link of interest
  *
- *	Force SATA spd limit according to libata.force and whine about
- *	it.  When only the port part is specified (e.g. 1:), the limit
- *	applies to all links connected to both the host link and all
- *	fan-out ports connected via PMP.  If the device part is
- *	specified as 0 (e.g. 1.00:), it specifies the first fan-out
- *	link not the host link.  Device number 15 always points to the
- *	host link whether PMP is attached or not.
+ *	Force link flags and SATA spd limit according to libata.force
+ *	and whine about it.  When only the port part is specified
+ *	(e.g. 1:), the limit applies to all links connected to both
+ *	the host link and all fan-out ports connected via PMP.  If the
+ *	device part is specified as 0 (e.g. 1.00:), it specifies the
+ *	first fan-out link not the host link.  Device number 15 always
+ *	points to the host link whether PMP is attached or not.
  *
  *	LOCKING:
  *	EH context.
  */
-static void ata_force_spd_limit(struct ata_link *link)
+static void ata_force_link_limits(struct ata_link *link)
 {
+	bool did_spd = false;
 	int linkno, i;
 
 	if (ata_is_host_link(link))
@@ -228,13 +230,22 @@ static void ata_force_spd_limit(struct ata_link *link)
 		if (fe->device != -1 && fe->device != linkno)
 			continue;
 
-		if (!fe->param.spd_limit)
-			continue;
+		/* only honor the first spd limit */
+		if (!did_spd && fe->param.spd_limit) {
+			link->hw_sata_spd_limit = (1 << fe->param.spd_limit) - 1;
+			ata_link_printk(link, KERN_NOTICE,
+					"FORCE: PHY spd limit set to %s\n",
+					fe->param.name);
+			did_spd = true;
+		}
 
-		link->hw_sata_spd_limit = (1 << fe->param.spd_limit) - 1;
-		ata_link_printk(link, KERN_NOTICE,
-			"FORCE: PHY spd limit set to %s\n", fe->param.name);
-		return;
+		/* let lflags stack */
+		if (fe->param.lflags) {
+			link->flags |= fe->param.lflags;
+			ata_link_printk(link, KERN_NOTICE,
+					"FORCE: link flag 0x%x forced -> 0x%x\n",
+					fe->param.lflags, link->flags);
+		}
 	}
 }
 
@@ -1132,6 +1143,8 @@ void ata_id_string(const u16 *id, unsigned char *s,
 {
 	unsigned int c;
 
+	BUG_ON(len & 1);
+
 	while (len > 0) {
 		c = id[ofs] >> 8;
 		*s = c;
@@ -1165,8 +1178,6 @@ void ata_id_c_string(const u16 *id, unsigned char *s,
 {
 	unsigned char *p;
 
-	WARN_ON(!(len & 1));
-
 	ata_id_string(id, s, ofs, len - 1);
 
 	p = s + strnlen(s, len - 1);
@@ -1886,6 +1897,23 @@ static u32 ata_pio_mask_no_iordy(const struct ata_device *adev)
 }
 
 /**
+ *	ata_do_dev_read_id		-	default ID read method
+ *	@dev: device
+ *	@tf: proposed taskfile
+ *	@id: data buffer
+ *
+ *	Issue the identify taskfile and hand back the buffer containing
+ *	identify data. For some RAID controllers and for pre ATA devices
+ *	this function is wrapped or replaced by the driver
+ */
+unsigned int ata_do_dev_read_id(struct ata_device *dev,
+					struct ata_taskfile *tf, u16 *id)
+{
+	return ata_exec_internal(dev, tf, NULL, DMA_FROM_DEVICE,
+				     id, sizeof(id[0]) * ATA_ID_WORDS, 0);
+}
+
+/**
  *	ata_dev_read_id - Read ID data from the specified device
  *	@dev: target device
  *	@p_class: pointer to class of the target device (may be changed)
@@ -1920,7 +1948,7 @@ int ata_dev_read_id(struct ata_device *dev, unsigned int *p_class,
 	if (ata_msg_ctl(ap))
 		ata_dev_printk(dev, KERN_DEBUG, "%s: ENTER\n", __func__);
 
- retry:
+retry:
 	ata_tf_init(dev, &tf);
 
 	switch (class) {
@@ -1948,8 +1976,11 @@ int ata_dev_read_id(struct ata_device *dev, unsigned int *p_class,
 	 */
 	tf.flags |= ATA_TFLAG_POLLING;
 
-	err_mask = ata_exec_internal(dev, &tf, NULL, DMA_FROM_DEVICE,
-				     id, sizeof(id[0]) * ATA_ID_WORDS, 0);
+	if (ap->ops->read_id)
+		err_mask = ap->ops->read_id(dev, &tf, id);
+	else
+		err_mask = ata_do_dev_read_id(dev, &tf, id);
+
 	if (err_mask) {
 		if (err_mask & AC_ERR_NODEV_HINT) {
 			ata_dev_printk(dev, KERN_DEBUG,
@@ -2142,6 +2173,16 @@ int ata_dev_configure(struct ata_device *dev)
 		return 0;
 	}
 
+	if ((!atapi_enabled || (ap->flags & ATA_FLAG_NO_ATAPI)) &&
+	    dev->class == ATA_DEV_ATAPI) {
+		ata_dev_printk(dev, KERN_WARNING,
+			"WARNING: ATAPI is %s, device ignored.\n",
+			atapi_enabled ? "not supported with this driver"
+				      : "disabled");
+		ata_dev_disable(dev);
+		return 0;
+	}
+
 	/* let ACPI work its magic */
 	rc = ata_acpi_on_devcfg(dev);
 	if (rc)
@@ -3247,7 +3288,7 @@ int ata_do_set_mode(struct ata_link *link, struct ata_device **r_failed_dev)
 		dev->dma_mode = ata_xfer_mask2mode(dma_mask);
 
 		found = 1;
-		if (dev->dma_mode != 0xff)
+		if (ata_dma_enabled(dev))
 			used_dma = 1;
 	}
 	if (!found)
@@ -3272,7 +3313,7 @@ int ata_do_set_mode(struct ata_link *link, struct ata_device **r_failed_dev)
 
 	/* step 3: set host DMA timings */
 	ata_link_for_each_dev(dev, link) {
-		if (!ata_dev_enabled(dev) || dev->dma_mode == 0xff)
+		if (!ata_dev_enabled(dev) || !ata_dma_enabled(dev))
 			continue;
 
 		dev->xfer_mode = dev->dma_mode;
@@ -5158,19 +5199,18 @@ void ata_link_init(struct ata_port *ap, struct ata_link *link, int pmp)
  */
 int sata_link_init_spd(struct ata_link *link)
 {
-	u32 scontrol;
 	u8 spd;
 	int rc;
 
-	rc = sata_scr_read(link, SCR_CONTROL, &scontrol);
+	rc = sata_scr_read(link, SCR_CONTROL, &link->saved_scontrol);
 	if (rc)
 		return rc;
 
-	spd = (scontrol >> 4) & 0xf;
+	spd = (link->saved_scontrol >> 4) & 0xf;
 	if (spd)
 		link->hw_sata_spd_limit &= (1 << spd) - 1;
 
-	ata_force_spd_limit(link);
+	ata_force_link_limits(link);
 
 	link->sata_spd_limit = link->hw_sata_spd_limit;
 
@@ -5753,9 +5793,10 @@ static void ata_port_detach(struct ata_port *ap)
 	ata_port_wait_eh(ap);
 
 	/* EH is now guaranteed to see UNLOADING - EH context belongs
-	 * to us.  Disable all existing devices.
+	 * to us.  Restore SControl and disable all existing devices.
 	 */
-	ata_port_for_each_link(link, ap) {
+	__ata_port_for_each_link(link, ap) {
+		sata_scr_write(link, SCR_CONTROL, link->saved_scontrol);
 		ata_link_for_each_dev(dev, link)
 			ata_dev_disable(dev);
 	}
@@ -5961,6 +6002,9 @@ static int __init ata_parse_force_one(char **cur,
 		{ "udma133",	.xfer_mask	= 1 << (ATA_SHIFT_UDMA + 6) },
 		{ "udma/133",	.xfer_mask	= 1 << (ATA_SHIFT_UDMA + 6) },
 		{ "udma7",	.xfer_mask	= 1 << (ATA_SHIFT_UDMA + 7) },
+		{ "nohrst",	.lflags		= ATA_LFLAG_NO_HRST },
+		{ "nosrst",	.lflags		= ATA_LFLAG_NO_SRST },
+		{ "norst",	.lflags		= ATA_LFLAG_NO_HRST | ATA_LFLAG_NO_SRST },
 	};
 	char *start = *cur, *p = *cur;
 	char *id, *val, *endp;
@@ -6088,16 +6132,20 @@ static int __init ata_init(void)
 
 	ata_wq = create_workqueue("ata");
 	if (!ata_wq)
-		return -ENOMEM;
+		goto free_force_tbl;
 
 	ata_aux_wq = create_singlethread_workqueue("ata_aux");
-	if (!ata_aux_wq) {
-		destroy_workqueue(ata_wq);
-		return -ENOMEM;
-	}
+	if (!ata_aux_wq)
+		goto free_wq;
 
 	printk(KERN_DEBUG "libata version " DRV_VERSION " loaded.\n");
 	return 0;
+
+free_wq:
+	destroy_workqueue(ata_wq);
+free_force_tbl:
+	kfree(ata_force_tbl);
+	return -ENOMEM;
 }
 
 static void __exit ata_exit(void)
@@ -6269,6 +6317,7 @@ EXPORT_SYMBOL_GPL(ata_host_resume);
 #endif /* CONFIG_PM */
 EXPORT_SYMBOL_GPL(ata_id_string);
 EXPORT_SYMBOL_GPL(ata_id_c_string);
+EXPORT_SYMBOL_GPL(ata_do_dev_read_id);
 EXPORT_SYMBOL_GPL(ata_scsi_simulate);
 
 EXPORT_SYMBOL_GPL(ata_pio_need_iordy);
diff --git a/drivers/ata/libata-eh.c b/drivers/ata/libata-eh.c
index 58bdc538d229..c1db2f234d2e 100644
--- a/drivers/ata/libata-eh.c
+++ b/drivers/ata/libata-eh.c
@@ -2040,7 +2040,7 @@ static void ata_eh_link_report(struct ata_link *link)
 	}
 
 	if (ehc->i.serror)
-		ata_port_printk(ap, KERN_ERR,
+		ata_link_printk(link, KERN_ERR,
 		  "SError: { %s%s%s%s%s%s%s%s%s%s%s%s%s%s%s%s%s}\n",
 		  ehc->i.serror & SERR_DATA_RECOVERED ? "RecovData " : "",
 		  ehc->i.serror & SERR_COMM_RECOVERED ? "RecovComm " : "",
@@ -2171,18 +2171,12 @@ static int ata_do_reset(struct ata_link *link, ata_reset_fn_t reset,
 }
 
 static int ata_eh_followup_srst_needed(struct ata_link *link,
-				       int rc, int classify,
-				       const unsigned int *classes)
+				       int rc, const unsigned int *classes)
 {
 	if ((link->flags & ATA_LFLAG_NO_SRST) || ata_link_offline(link))
 		return 0;
-	if (rc == -EAGAIN) {
-		if (classify)
-			return 1;
-		rc = 0;
-	}
-	if (rc != 0)
-		return 0;
+	if (rc == -EAGAIN)
+		return 1;
 	if (sata_pmp_supported(link->ap) && ata_is_host_link(link))
 		return 1;
 	return 0;
@@ -2210,6 +2204,10 @@ int ata_eh_reset(struct ata_link *link, int classify,
 	 */
 	while (ata_eh_reset_timeouts[max_tries] != ULONG_MAX)
 		max_tries++;
+	if (link->flags & ATA_LFLAG_NO_HRST)
+		hardreset = NULL;
+	if (link->flags & ATA_LFLAG_NO_SRST)
+		softreset = NULL;
 
 	now = jiffies;
 	deadline = ata_deadline(ehc->last_reset, ATA_EH_RESET_COOL_DOWN);
@@ -2247,10 +2245,10 @@ int ata_eh_reset(struct ata_link *link, int classify,
 	ehc->i.action &= ~ATA_EH_RESET;
 	if (hardreset) {
 		reset = hardreset;
-		ehc->i.action = ATA_EH_HARDRESET;
+		ehc->i.action |= ATA_EH_HARDRESET;
 	} else if (softreset) {
 		reset = softreset;
-		ehc->i.action = ATA_EH_SOFTRESET;
+		ehc->i.action |= ATA_EH_SOFTRESET;
 	}
 
 	if (prereset) {
@@ -2305,9 +2303,11 @@ int ata_eh_reset(struct ata_link *link, int classify,
 			ehc->i.flags |= ATA_EHI_DID_SOFTRESET;
 
 		rc = ata_do_reset(link, reset, classes, deadline);
+		if (rc && rc != -EAGAIN)
+			goto fail;
 
 		if (reset == hardreset &&
-		    ata_eh_followup_srst_needed(link, rc, classify, classes)) {
+		    ata_eh_followup_srst_needed(link, rc, classes)) {
 			/* okay, let's do follow-up softreset */
 			reset = softreset;
 
@@ -2322,10 +2322,6 @@ int ata_eh_reset(struct ata_link *link, int classify,
 			ata_eh_about_to_do(link, NULL, ATA_EH_RESET);
 			rc = ata_do_reset(link, reset, classes, deadline);
 		}
-
-		/* -EAGAIN can happen if we skipped followup SRST */
-		if (rc && rc != -EAGAIN)
-			goto fail;
 	} else {
 		if (verbose)
 			ata_link_printk(link, KERN_INFO, "no reset method "
diff --git a/drivers/ata/libata-scsi.c b/drivers/ata/libata-scsi.c
index f3b4b15a8dc4..b9d3ba423cb2 100644
--- a/drivers/ata/libata-scsi.c
+++ b/drivers/ata/libata-scsi.c
@@ -2551,36 +2551,6 @@ static struct ata_device *__ata_scsi_find_dev(struct ata_port *ap,
 }
 
 /**
- *	ata_scsi_dev_enabled - determine if device is enabled
- *	@dev: ATA device
- *
- *	Determine if commands should be sent to the specified device.
- *
- *	LOCKING:
- *	spin_lock_irqsave(host lock)
- *
- *	RETURNS:
- *	0 if commands are not allowed / 1 if commands are allowed
- */
-
-static int ata_scsi_dev_enabled(struct ata_device *dev)
-{
-	if (unlikely(!ata_dev_enabled(dev)))
-		return 0;
-
-	if (!atapi_enabled || (dev->link->ap->flags & ATA_FLAG_NO_ATAPI)) {
-		if (unlikely(dev->class == ATA_DEV_ATAPI)) {
-			ata_dev_printk(dev, KERN_WARNING,
-				       "WARNING: ATAPI is %s, device ignored.\n",
-				       atapi_enabled ? "not supported with this driver" : "disabled");
-			return 0;
-		}
-	}
-
-	return 1;
-}
-
-/**
  *	ata_scsi_find_dev - lookup ata_device from scsi_cmnd
  *	@ap: ATA port to which the device is attached
  *	@scsidev: SCSI device from which we derive the ATA device
@@ -2601,7 +2571,7 @@ ata_scsi_find_dev(struct ata_port *ap, const struct scsi_device *scsidev)
 {
 	struct ata_device *dev = __ata_scsi_find_dev(ap, scsidev);
 
-	if (unlikely(!dev || !ata_scsi_dev_enabled(dev)))
+	if (unlikely(!dev || !ata_dev_enabled(dev)))
 		return NULL;
 
 	return dev;
@@ -3622,7 +3592,7 @@ int ata_sas_queuecmd(struct scsi_cmnd *cmd, void (*done)(struct scsi_cmnd *),
 
 	ata_scsi_dump_cdb(ap, cmd);
 
-	if (likely(ata_scsi_dev_enabled(ap->link.device)))
+	if (likely(ata_dev_enabled(ap->link.device)))
 		rc = __ata_scsi_queuecmd(cmd, done, ap->link.device);
 	else {
 		cmd->result = (DID_BAD_TARGET << 16);
diff --git a/drivers/ata/libata.h b/drivers/ata/libata.h
index f6f9c28ec7f8..ade5c75b6144 100644
--- a/drivers/ata/libata.h
+++ b/drivers/ata/libata.h
@@ -66,7 +66,6 @@ enum {
 
 extern unsigned int ata_print_id;
 extern struct workqueue_struct *ata_aux_wq;
-extern int atapi_enabled;
 extern int atapi_passthru16;
 extern int libata_fua;
 extern int libata_noacpi;
diff --git a/drivers/ata/pata_acpi.c b/drivers/ata/pata_acpi.c
index fbe605711554..eb919c16a03e 100644
--- a/drivers/ata/pata_acpi.c
+++ b/drivers/ata/pata_acpi.c
@@ -181,7 +181,7 @@ static unsigned int pacpi_qc_issue(struct ata_queued_cmd *qc)
 
 	if (adev != acpi->last) {
 		pacpi_set_piomode(ap, adev);
-		if (adev->dma_mode)
+		if (ata_dma_enabled(adev))
 			pacpi_set_dmamode(ap, adev);
 		acpi->last = adev;
 	}
diff --git a/drivers/ata/pata_ali.c b/drivers/ata/pata_ali.c
index 0f3e659db99a..5ca70fa1f587 100644
--- a/drivers/ata/pata_ali.c
+++ b/drivers/ata/pata_ali.c
@@ -550,8 +550,9 @@ static int ali_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
 		pci_read_config_byte(isa_bridge, 0x5E, &tmp);
 		if ((tmp & 0x1E) == 0x12)
 	        	ppi[0] = &info_20_udma;
-		pci_dev_put(isa_bridge);
 	}
+	pci_dev_put(isa_bridge);
+
 	return ata_pci_sff_init_one(pdev, ppi, &ali_sht, NULL);
 }
 
diff --git a/drivers/ata/pata_at32.c b/drivers/ata/pata_at32.c
index 82fb6e273169..ab61095093b9 100644
--- a/drivers/ata/pata_at32.c
+++ b/drivers/ata/pata_at32.c
@@ -24,8 +24,8 @@
 #include <linux/err.h>
 #include <linux/io.h>
 
-#include <asm/arch/board.h>
-#include <asm/arch/smc.h>
+#include <mach/board.h>
+#include <mach/smc.h>
 
 #define DRV_NAME "pata_at32"
 #define DRV_VERSION "0.0.3"
diff --git a/drivers/ata/pata_atiixp.c b/drivers/ata/pata_atiixp.c
index d7de7baf58a8..e8a0d99d7356 100644
--- a/drivers/ata/pata_atiixp.c
+++ b/drivers/ata/pata_atiixp.c
@@ -183,7 +183,7 @@ static void atiixp_bmdma_start(struct ata_queued_cmd *qc)
 	u16 tmp16;
 
 	pci_read_config_word(pdev, ATIIXP_IDE_UDMA_CONTROL, &tmp16);
-	if (adev->dma_mode >= XFER_UDMA_0)
+	if (ata_using_udma(adev))
 		tmp16 |= (1 << dn);
 	else
 		tmp16 &= ~(1 << dn);
diff --git a/drivers/ata/pata_cs5530.c b/drivers/ata/pata_cs5530.c
index 744beebaaf49..0c4b271a9d5a 100644
--- a/drivers/ata/pata_cs5530.c
+++ b/drivers/ata/pata_cs5530.c
@@ -149,10 +149,10 @@ static unsigned int cs5530_qc_issue(struct ata_queued_cmd *qc)
 	struct ata_device *prev = ap->private_data;
 
 	/* See if the DMA settings could be wrong */
-	if (adev->dma_mode != 0 && adev != prev && prev != NULL) {
+	if (ata_dma_enabled(adev) && adev != prev && prev != NULL) {
 		/* Maybe, but do the channels match MWDMA/UDMA ? */
-		if ((adev->dma_mode >= XFER_UDMA_0 && prev->dma_mode < XFER_UDMA_0) ||
-		    (adev->dma_mode < XFER_UDMA_0 && prev->dma_mode >= XFER_UDMA_0))
+		if ((ata_using_udma(adev) && !ata_using_udma(prev)) ||
+		    (ata_using_udma(prev) && !ata_using_udma(adev)))
 		    	/* Switch the mode bits */
 		    	cs5530_set_dmamode(ap, adev);
 	}
diff --git a/drivers/ata/pata_it821x.c b/drivers/ata/pata_it821x.c
index e10816931b2f..0221c9a46769 100644
--- a/drivers/ata/pata_it821x.c
+++ b/drivers/ata/pata_it821x.c
@@ -80,7 +80,7 @@
 
 
 #define DRV_NAME "pata_it821x"
-#define DRV_VERSION "0.3.8"
+#define DRV_VERSION "0.4.0"
 
 struct it821x_dev
 {
@@ -425,6 +425,8 @@ static unsigned int it821x_smart_qc_issue(struct ata_queued_cmd *qc)
 		case ATA_CMD_WRITE_MULTI:
 		case ATA_CMD_WRITE_MULTI_EXT:
 		case ATA_CMD_ID_ATA:
+		case ATA_CMD_INIT_DEV_PARAMS:
+		case 0xFC:	/* Internal 'report rebuild state' */
 		/* Arguably should just no-op this one */
 		case ATA_CMD_SET_FEATURES:
 			return ata_sff_qc_issue(qc);
@@ -509,7 +511,7 @@ static void it821x_dev_config(struct ata_device *adev)
 
 	if (strstr(model_num, "Integrated Technology Express")) {
 		/* RAID mode */
-		printk(KERN_INFO "IT821x %sRAID%d volume",
+		ata_dev_printk(adev, KERN_INFO, "%sRAID%d volume",
 			adev->id[147]?"Bootable ":"",
 			adev->id[129]);
 		if (adev->id[129] != 1)
@@ -519,37 +521,51 @@ static void it821x_dev_config(struct ata_device *adev)
 	/* This is a controller firmware triggered funny, don't
 	   report the drive faulty! */
 	adev->horkage &= ~ATA_HORKAGE_DIAGNOSTIC;
+	/* No HPA in 'smart' mode */
+	adev->horkage |= ATA_HORKAGE_BROKEN_HPA;
 }
 
 /**
- *	it821x_ident_hack	-	Hack identify data up
- *	@ap: Port
+ *	it821x_read_id	-	Hack identify data up
+ *	@adev: device to read
+ *	@tf: proposed taskfile
+ *	@id: buffer for returned ident data
  *
- *	Walk the devices on this firmware driven port and slightly
+ *	Query the devices on this firmware driven port and slightly
  *	mash the identify data to stop us and common tools trying to
  *	use features not firmware supported. The firmware itself does
  *	some masking (eg SMART) but not enough.
- *
- *	This is a bit of an abuse of the cable method, but it is the
- *	only method called at the right time. We could modify the libata
- *	core specifically for ident hacking but while we have one offender
- *	it seems better to keep the fallout localised.
  */
 
-static int it821x_ident_hack(struct ata_port *ap)
+static unsigned int it821x_read_id(struct ata_device *adev,
+					struct ata_taskfile *tf, u16 *id)
 {
-	struct ata_device *adev;
-	ata_link_for_each_dev(adev, &ap->link) {
-		if (ata_dev_enabled(adev)) {
-			adev->id[84] &= ~(1 << 6);	/* No FUA */
-			adev->id[85] &= ~(1 << 10);	/* No HPA */
-			adev->id[76] = 0;		/* No NCQ/AN etc */
-		}
+	unsigned int err_mask;
+	unsigned char model_num[ATA_ID_PROD_LEN + 1];
+
+	err_mask = ata_do_dev_read_id(adev, tf, id);
+	if (err_mask)
+		return err_mask;
+	ata_id_c_string(id, model_num, ATA_ID_PROD, sizeof(model_num));
+
+	id[83] &= ~(1 << 12);	/* Cache flush is firmware handled */
+	id[83] &= ~(1 << 13);	/* Ditto for LBA48 flushes */
+	id[84] &= ~(1 << 6);	/* No FUA */
+	id[85] &= ~(1 << 10);	/* No HPA */
+	id[76] = 0;		/* No NCQ/AN etc */
+
+	if (strstr(model_num, "Integrated Technology Express")) {
+		/* Set feature bits the firmware neglects */
+		id[49] |= 0x0300;	/* LBA, DMA */
+		id[82] |= 0x0400;	/* LBA48 */
+		id[83] &= 0x7FFF;
+		id[83] |= 0x4000;	/* Word 83 is valid */
+		id[86] |= 0x0400;	/* LBA48 on */
+		id[ATA_ID_MAJOR_VER] |= 0x1F;
 	}
-	return ata_cable_unknown(ap);
+	return err_mask;
 }
 
-
 /**
  *	it821x_check_atapi_dma	-	ATAPI DMA handler
  *	@qc: Command we are about to issue
@@ -577,6 +593,136 @@ static int it821x_check_atapi_dma(struct ata_queued_cmd *qc)
 	return 0;
 }
 
+/**
+ *	it821x_display_disk	-	display disk setup
+ *	@n: Device number
+ *	@buf: Buffer block from firmware
+ *
+ *	Produce a nice informative display of the device setup as provided
+ *	by the firmware.
+ */
+
+static void it821x_display_disk(int n, u8 *buf)
+{
+	unsigned char id[41];
+	int mode = 0;
+	char *mtype = "";
+	char mbuf[8];
+	char *cbl = "(40 wire cable)";
+
+	static const char *types[5] = {
+		"RAID0", "RAID1" "RAID 0+1", "JBOD", "DISK"
+	};
+
+	if (buf[52] > 4)	/* No Disk */
+		return;
+
+	ata_id_c_string((u16 *)buf, id, 0, 41); 
+
+	if (buf[51]) {
+		mode = ffs(buf[51]);
+		mtype = "UDMA";
+	} else if (buf[49]) {
+		mode = ffs(buf[49]);
+		mtype = "MWDMA";
+	}
+
+	if (buf[76])
+		cbl = "";
+
+	if (mode)
+		snprintf(mbuf, 8, "%5s%d", mtype, mode - 1);
+	else
+		strcpy(mbuf, "PIO");
+	if (buf[52] == 4)
+		printk(KERN_INFO "%d: %-6s %-8s          %s %s\n",
+				n, mbuf, types[buf[52]], id, cbl);
+	else
+		printk(KERN_INFO "%d: %-6s %-8s Volume: %1d %s %s\n",
+				n, mbuf, types[buf[52]], buf[53], id, cbl);
+	if (buf[125] < 100)
+		printk(KERN_INFO "%d: Rebuilding: %d%%\n", n, buf[125]);
+}
+
+/**
+ *	it821x_firmware_command		-	issue firmware command
+ *	@ap: IT821x port to interrogate
+ *	@cmd: command
+ *	@len: length
+ *
+ *	Issue firmware commands expecting data back from the controller. We
+ *	use this to issue commands that do not go via the normal paths. Other
+ *	commands such as 0xFC can be issued normally.
+ */
+
+static u8 *it821x_firmware_command(struct ata_port *ap, u8 cmd, int len)
+{
+	u8 status;
+	int n = 0;
+	u16 *buf = kmalloc(len, GFP_KERNEL);
+	if (buf == NULL) {
+		printk(KERN_ERR "it821x_firmware_command: Out of memory\n");
+		return NULL;
+	}
+	/* This isn't quite a normal ATA command as we are talking to the
+	   firmware not the drives */
+	ap->ctl |= ATA_NIEN;
+	iowrite8(ap->ctl, ap->ioaddr.ctl_addr);
+	ata_wait_idle(ap);
+	iowrite8(ATA_DEVICE_OBS, ap->ioaddr.device_addr);
+	iowrite8(cmd, ap->ioaddr.command_addr);
+	udelay(1);
+	/* This should be almost immediate but a little paranoia goes a long
+	   way. */
+	while(n++ < 10) {
+		status = ioread8(ap->ioaddr.status_addr);
+		if (status & ATA_ERR) {
+			kfree(buf);
+			printk(KERN_ERR "it821x_firmware_command: rejected\n");
+			return NULL;
+		}
+		if (status & ATA_DRQ) {
+			ioread16_rep(ap->ioaddr.data_addr, buf, len/2);
+			return (u8 *)buf;
+		}
+		mdelay(1);
+	}
+	kfree(buf);
+	printk(KERN_ERR "it821x_firmware_command: timeout\n");
+	return NULL;
+}
+
+/**
+ *	it821x_probe_firmware	-	firmware reporting/setup
+ *	@ap: IT821x port being probed
+ *
+ *	Probe the firmware of the controller by issuing firmware command
+ *	0xFA and analysing the returned data.
+ */
+
+static void it821x_probe_firmware(struct ata_port *ap)
+{
+	u8 *buf;
+	int i;
+
+	/* This is a bit ugly as we can't just issue a task file to a device
+	   as this is controller magic */
+
+	buf = it821x_firmware_command(ap, 0xFA, 512);
+
+	if (buf != NULL) {
+		printk(KERN_INFO "pata_it821x: Firmware %02X/%02X/%02X%02X\n",
+				buf[505],
+				buf[506],
+				buf[507],
+				buf[508]);
+		for (i = 0; i < 4; i++)
+ 			it821x_display_disk(i, buf + 128 * i);
+		kfree(buf);
+	}
+}
+
+
 
 /**
  *	it821x_port_start	-	port setup
@@ -610,6 +756,8 @@ static int it821x_port_start(struct ata_port *ap)
 		/* Long I/O's although allowed in LBA48 space cause the
 		   onboard firmware to enter the twighlight zone */
 		/* No ATAPI DMA in this mode either */
+		if (ap->port_no == 0)
+			it821x_probe_firmware(ap);
 	}
 	/* Pull the current clocks from 0x50 */
 	if (conf & (1 << (1 + ap->port_no)))
@@ -631,6 +779,25 @@ static int it821x_port_start(struct ata_port *ap)
 	return 0;
 }
 
+/**
+ *	it821x_rdc_cable	-	Cable detect for RDC1010
+ *	@ap: port we are checking
+ *
+ *	Return the RDC1010 cable type. Unlike the IT821x we know how to do
+ *	this and can do host side cable detect
+ */
+
+static int it821x_rdc_cable(struct ata_port *ap)
+{
+	u16 r40;
+	struct pci_dev *pdev = to_pci_dev(ap->host->dev);
+
+	pci_read_config_word(pdev, 0x40, &r40);
+	if (r40 & (1 << (2 + ap->port_no)))
+		return ATA_CBL_PATA40;
+	return ATA_CBL_PATA80;
+}
+
 static struct scsi_host_template it821x_sht = {
 	ATA_BMDMA_SHT(DRV_NAME),
 };
@@ -641,9 +808,10 @@ static struct ata_port_operations it821x_smart_port_ops = {
 	.check_atapi_dma= it821x_check_atapi_dma,
 	.qc_issue	= it821x_smart_qc_issue,
 
-	.cable_detect	= it821x_ident_hack,
+	.cable_detect	= ata_cable_80wire,
 	.set_mode	= it821x_smart_set_mode,
 	.dev_config	= it821x_dev_config,
+	.read_id	= it821x_read_id,
 
 	.port_start	= it821x_port_start,
 };
@@ -664,8 +832,29 @@ static struct ata_port_operations it821x_passthru_port_ops = {
 	.port_start	= it821x_port_start,
 };
 
+static struct ata_port_operations it821x_rdc_port_ops = {
+	.inherits	= &ata_bmdma_port_ops,
+
+	.check_atapi_dma= it821x_check_atapi_dma,
+	.sff_dev_select	= it821x_passthru_dev_select,
+	.bmdma_start 	= it821x_passthru_bmdma_start,
+	.bmdma_stop	= it821x_passthru_bmdma_stop,
+	.qc_issue	= it821x_passthru_qc_issue,
+
+	.cable_detect	= it821x_rdc_cable,
+	.set_piomode	= it821x_passthru_set_piomode,
+	.set_dmamode	= it821x_passthru_set_dmamode,
+
+	.port_start	= it821x_port_start,
+};
+
 static void it821x_disable_raid(struct pci_dev *pdev)
 {
+	/* Neither the RDC nor the IT8211 */
+	if (pdev->vendor != PCI_VENDOR_ID_ITE ||
+			pdev->device != PCI_DEVICE_ID_ITE_8212)
+			return;
+
 	/* Reset local CPU, and set BIOS not ready */
 	pci_write_config_byte(pdev, 0x5E, 0x01);
 
@@ -690,6 +879,7 @@ static int it821x_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
 		.flags = ATA_FLAG_SLAVE_POSS,
 		.pio_mask = 0x1f,
 		.mwdma_mask = 0x07,
+		.udma_mask = ATA_UDMA6,
 		.port_ops = &it821x_smart_port_ops
 	};
 	static const struct ata_port_info info_passthru = {
@@ -699,6 +889,13 @@ static int it821x_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
 		.udma_mask = ATA_UDMA6,
 		.port_ops = &it821x_passthru_port_ops
 	};
+	static const struct ata_port_info info_rdc = {
+		.flags = ATA_FLAG_SLAVE_POSS,
+		.pio_mask = 0x1f,
+		.mwdma_mask = 0x07,
+		/* No UDMA */
+		.port_ops = &it821x_rdc_port_ops
+	};
 
 	const struct ata_port_info *ppi[] = { NULL, NULL };
 	static char *mode[2] = { "pass through", "smart" };
@@ -707,21 +904,25 @@ static int it821x_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
 	rc = pcim_enable_device(pdev);
 	if (rc)
 		return rc;
+		
+	if (pdev->vendor == PCI_VENDOR_ID_RDC) {
+		ppi[0] = &info_rdc;
+	} else {
+		/* Force the card into bypass mode if so requested */
+		if (it8212_noraid) {
+			printk(KERN_INFO DRV_NAME ": forcing bypass mode.\n");
+			it821x_disable_raid(pdev);
+		}
+		pci_read_config_byte(pdev, 0x50, &conf);
+		conf &= 1;
 
-	/* Force the card into bypass mode if so requested */
-	if (it8212_noraid) {
-		printk(KERN_INFO DRV_NAME ": forcing bypass mode.\n");
-		it821x_disable_raid(pdev);
+		printk(KERN_INFO DRV_NAME": controller in %s mode.\n",
+								mode[conf]);
+		if (conf == 0)
+			ppi[0] = &info_passthru;
+		else
+			ppi[0] = &info_smart;
 	}
-	pci_read_config_byte(pdev, 0x50, &conf);
-	conf &= 1;
-
-	printk(KERN_INFO DRV_NAME ": controller in %s mode.\n", mode[conf]);
-	if (conf == 0)
-		ppi[0] = &info_passthru;
-	else
-		ppi[0] = &info_smart;
-
 	return ata_pci_sff_init_one(pdev, ppi, &it821x_sht, NULL);
 }
 
@@ -745,6 +946,7 @@ static int it821x_reinit_one(struct pci_dev *pdev)
 static const struct pci_device_id it821x[] = {
 	{ PCI_VDEVICE(ITE, PCI_DEVICE_ID_ITE_8211), },
 	{ PCI_VDEVICE(ITE, PCI_DEVICE_ID_ITE_8212), },
+	{ PCI_VDEVICE(RDC, 0x1010), },
 
 	{ },
 };
diff --git a/drivers/ata/pata_ixp4xx_cf.c b/drivers/ata/pata_ixp4xx_cf.c
index de8d186f5abf..2014253f6c88 100644
--- a/drivers/ata/pata_ixp4xx_cf.c
+++ b/drivers/ata/pata_ixp4xx_cf.c
@@ -169,7 +169,7 @@ static __devinit int ixp4xx_pata_probe(struct platform_device *pdev)
 
 	irq = platform_get_irq(pdev, 0);
 	if (irq)
-		set_irq_type(irq, IRQT_RISING);
+		set_irq_type(irq, IRQ_TYPE_EDGE_RISING);
 
 	/* Setup expansion bus chip selects */
 	*data->cs0_cfg = data->cs0_bits;
diff --git a/drivers/ata/pata_oldpiix.c b/drivers/ata/pata_oldpiix.c
index e678af383d13..df64f2443001 100644
--- a/drivers/ata/pata_oldpiix.c
+++ b/drivers/ata/pata_oldpiix.c
@@ -198,7 +198,7 @@ static unsigned int oldpiix_qc_issue(struct ata_queued_cmd *qc)
 
 	if (adev != ap->private_data) {
 		oldpiix_set_piomode(ap, adev);
-		if (adev->dma_mode)
+		if (ata_dma_enabled(adev))
 			oldpiix_set_dmamode(ap, adev);
 	}
 	return ata_sff_qc_issue(qc);
diff --git a/drivers/ata/pata_sc1200.c b/drivers/ata/pata_sc1200.c
index cbab397e3db7..0278fd2b8fb1 100644
--- a/drivers/ata/pata_sc1200.c
+++ b/drivers/ata/pata_sc1200.c
@@ -167,10 +167,10 @@ static unsigned int sc1200_qc_issue(struct ata_queued_cmd *qc)
 	struct ata_device *prev = ap->private_data;
 
 	/* See if the DMA settings could be wrong */
-	if (adev->dma_mode != 0 && adev != prev && prev != NULL) {
+	if (ata_dma_enabled(adev) && adev != prev && prev != NULL) {
 		/* Maybe, but do the channels match MWDMA/UDMA ? */
-		if ((adev->dma_mode >= XFER_UDMA_0 && prev->dma_mode < XFER_UDMA_0) ||
-		    (adev->dma_mode < XFER_UDMA_0 && prev->dma_mode >= XFER_UDMA_0))
+		if ((ata_using_udma(adev) && !ata_using_udma(prev)) ||
+		    (ata_using_udma(prev) && !ata_using_udma(adev)))
 		    	/* Switch the mode bits */
 		    	sc1200_set_dmamode(ap, adev);
 	}
diff --git a/drivers/ata/pata_via.c b/drivers/ata/pata_via.c
index 708ed144ede9..8fdb2ce73210 100644
--- a/drivers/ata/pata_via.c
+++ b/drivers/ata/pata_via.c
@@ -98,7 +98,8 @@ static const struct via_isa_bridge {
 	u8 rev_max;
 	u16 flags;
 } via_isa_bridges[] = {
-	{ "vx800",	PCI_DEVICE_ID_VIA_VX800,    0x00, 0x2f, VIA_UDMA_133 | VIA_BAD_AST },
+	{ "vx800",	PCI_DEVICE_ID_VIA_VX800,    0x00, 0x2f, VIA_UDMA_133 |
+	VIA_BAD_AST | VIA_SATA_PATA },
 	{ "vt8237s",	PCI_DEVICE_ID_VIA_8237S,    0x00, 0x2f, VIA_UDMA_133 | VIA_BAD_AST },
 	{ "vt8251",	PCI_DEVICE_ID_VIA_8251,     0x00, 0x2f, VIA_UDMA_133 | VIA_BAD_AST },
 	{ "cx700",	PCI_DEVICE_ID_VIA_CX700,    0x00, 0x2f, VIA_UDMA_133 | VIA_BAD_AST | VIA_SATA_PATA },
@@ -322,6 +323,29 @@ static void via_set_dmamode(struct ata_port *ap, struct ata_device *adev)
 	via_do_set_mode(ap, adev, adev->dma_mode, tclock[mode], set_ast, udma[mode]);
 }
 
+/**
+ *	via_tf_load - send taskfile registers to host controller
+ *	@ap: Port to which output is sent
+ *	@tf: ATA taskfile register set
+ *
+ *	Outputs ATA taskfile to standard ATA host controller.
+ *
+ *	Note: This is to fix the internal bug of via chipsets, which
+ *	will reset the device register after changing the IEN bit on
+ *	ctl register
+ */
+static void via_tf_load(struct ata_port *ap, const struct ata_taskfile *tf)
+{
+	struct ata_taskfile tmp_tf;
+
+	if (ap->ctl != ap->last_ctl && !(tf->flags & ATA_TFLAG_DEVICE)) {
+		tmp_tf = *tf;
+		tmp_tf.flags |= ATA_TFLAG_DEVICE;
+		tf = &tmp_tf;
+	}
+	ata_sff_tf_load(ap, tf);
+}
+
 static struct scsi_host_template via_sht = {
 	ATA_BMDMA_SHT(DRV_NAME),
 };
@@ -332,6 +356,7 @@ static struct ata_port_operations via_port_ops = {
 	.set_piomode	= via_set_piomode,
 	.set_dmamode	= via_set_dmamode,
 	.prereset	= via_pre_reset,
+	.sff_tf_load	= via_tf_load,
 };
 
 static struct ata_port_operations via_port_ops_noirq = {
diff --git a/drivers/ata/sata_mv.c b/drivers/ata/sata_mv.c
index ad169ffbc4cb..13c1d2af18ac 100644
--- a/drivers/ata/sata_mv.c
+++ b/drivers/ata/sata_mv.c
@@ -1134,30 +1134,16 @@ static int mv_qc_defer(struct ata_queued_cmd *qc)
 	if (ap->nr_active_links == 0)
 		return 0;
 
-	if (pp->pp_flags & MV_PP_FLAG_EDMA_EN) {
-		/*
-		 * The port is operating in host queuing mode (EDMA).
-		 * It can accomodate a new qc if the qc protocol
-		 * is compatible with the current host queue mode.
-		 */
-		if (pp->pp_flags & MV_PP_FLAG_NCQ_EN) {
-			/*
-			 * The host queue (EDMA) is in NCQ mode.
-			 * If the new qc is also an NCQ command,
-			 * then allow the new qc.
-			 */
-			if (qc->tf.protocol == ATA_PROT_NCQ)
-				return 0;
-		} else {
-			/*
-			 * The host queue (EDMA) is in non-NCQ, DMA mode.
-			 * If the new qc is also a non-NCQ, DMA command,
-			 * then allow the new qc.
-			 */
-			if (qc->tf.protocol == ATA_PROT_DMA)
-				return 0;
-		}
-	}
+	/*
+	 * The port is operating in host queuing mode (EDMA) with NCQ
+	 * enabled, allow multiple NCQ commands.  EDMA also allows
+	 * queueing multiple DMA commands but libata core currently
+	 * doesn't allow it.
+	 */
+	if ((pp->pp_flags & MV_PP_FLAG_EDMA_EN) &&
+	    (pp->pp_flags & MV_PP_FLAG_NCQ_EN) && ata_is_ncq(qc->tf.protocol))
+		return 0;
+
 	return ATA_DEFER_PORT;
 }
 
@@ -3036,7 +3022,8 @@ static int mv_chip_id(struct ata_host *host, unsigned int board_idx)
 		break;
 	case chip_soc:
 		hpriv->ops = &mv_soc_ops;
-		hp_flags |= MV_HP_FLAG_SOC | MV_HP_ERRATA_60X1C0;
+		hp_flags |= MV_HP_FLAG_SOC | MV_HP_GEN_IIE |
+			MV_HP_ERRATA_60X1C0;
 		break;
 
 	default:
diff --git a/drivers/atm/adummy.c b/drivers/atm/adummy.c
index 2ebd07f2ef81..5effec6f5458 100644
--- a/drivers/atm/adummy.c
+++ b/drivers/atm/adummy.c
@@ -3,7 +3,6 @@
  */
 
 #include <linux/module.h>
-#include <linux/version.h>
 #include <linux/kernel.h>
 #include <linux/skbuff.h>
 #include <linux/errno.h>
diff --git a/drivers/atm/iphase.c b/drivers/atm/iphase.c
index 24df73ad326d..088885ed51b9 100644
--- a/drivers/atm/iphase.c
+++ b/drivers/atm/iphase.c
@@ -156,8 +156,8 @@ static void ia_hack_tcq(IADEV *dev) {
         }
         iavcc_r->vc_desc_cnt--;
         dev->desc_tbl[desc1 -1].timestamp = 0;
-        IF_EVENT(printk("ia_hack: return_q skb = 0x%x desc = %d\n", 
-                                   (u32)dev->desc_tbl[desc1 -1].txskb, desc1);)
+        IF_EVENT(printk("ia_hack: return_q skb = 0x%p desc = %d\n",
+                                   dev->desc_tbl[desc1 -1].txskb, desc1);)
         if (iavcc_r->pcr < dev->rate_limit) {
            IA_SKB_STATE (dev->desc_tbl[desc1-1].txskb) |= IA_TX_DONE;
            if (ia_enque_rtn_q(&dev->tx_return_q, dev->desc_tbl[desc1 -1]) < 0)
@@ -527,8 +527,8 @@ static int ia_cbr_setup (IADEV *dev, struct atm_vcc *vcc) {
       inc = 0;
       testSlot = idealSlot;
       TstSchedTbl = (u16*)(SchedTbl+testSlot);  //set index and read in value
-      IF_CBR(printk("CBR Testslot 0x%x AT Location 0x%x, NumToAssign=%d\n",
-                                testSlot, (u32)TstSchedTbl,toBeAssigned);) 
+      IF_CBR(printk("CBR Testslot 0x%x AT Location 0x%p, NumToAssign=%d\n",
+                                testSlot, TstSchedTbl,toBeAssigned);)
       memcpy((caddr_t)&cbrVC,(caddr_t)TstSchedTbl,sizeof(cbrVC));
       while (cbrVC)  // If another VC at this location, we have to keep looking
       {
@@ -536,8 +536,8 @@ static int ia_cbr_setup (IADEV *dev, struct atm_vcc *vcc) {
           testSlot = idealSlot - inc;
           if (testSlot < 0) { // Wrap if necessary
              testSlot += dev->CbrTotEntries;
-             IF_CBR(printk("Testslot Wrap. STable Start=0x%x,Testslot=%d\n",
-                                                       (u32)SchedTbl,testSlot);)
+             IF_CBR(printk("Testslot Wrap. STable Start=0x%p,Testslot=%d\n",
+                                                       SchedTbl,testSlot);)
           }
           TstSchedTbl = (u16 *)(SchedTbl + testSlot);  // set table index
           memcpy((caddr_t)&cbrVC,(caddr_t)TstSchedTbl,sizeof(cbrVC)); 
@@ -552,8 +552,8 @@ static int ia_cbr_setup (IADEV *dev, struct atm_vcc *vcc) {
           } 
           // set table index and read in value
           TstSchedTbl = (u16*)(SchedTbl + testSlot);
-          IF_CBR(printk("Reading CBR Tbl from 0x%x, CbrVal=0x%x Iteration %d\n",
-                          (u32)TstSchedTbl,cbrVC,inc);) 
+          IF_CBR(printk("Reading CBR Tbl from 0x%p, CbrVal=0x%x Iteration %d\n",
+                          TstSchedTbl,cbrVC,inc);)
           memcpy((caddr_t)&cbrVC,(caddr_t)TstSchedTbl,sizeof(cbrVC));
        } /* while */
        // Move this VCI number into this location of the CBR Sched table.
@@ -1427,11 +1427,11 @@ static int rx_init(struct atm_dev *dev)
 	/* We know this is 32bit bus addressed so the following is safe */
 	writel(iadev->rx_dle_dma & 0xfffff000,
 	       iadev->dma + IPHASE5575_RX_LIST_ADDR);  
-	IF_INIT(printk("Tx Dle list addr: 0x%08x value: 0x%0x\n", 
-                      (u32)(iadev->dma+IPHASE5575_TX_LIST_ADDR), 
+	IF_INIT(printk("Tx Dle list addr: 0x%p value: 0x%0x\n",
+                      iadev->dma+IPHASE5575_TX_LIST_ADDR,
                       *(u32*)(iadev->dma+IPHASE5575_TX_LIST_ADDR));  
-	printk("Rx Dle list addr: 0x%08x value: 0x%0x\n", 
-                      (u32)(iadev->dma+IPHASE5575_RX_LIST_ADDR), 
+	printk("Rx Dle list addr: 0x%p value: 0x%0x\n",
+                      iadev->dma+IPHASE5575_RX_LIST_ADDR,
                       *(u32*)(iadev->dma+IPHASE5575_RX_LIST_ADDR));)  
   
 	writew(0xffff, iadev->reass_reg+REASS_MASK_REG);  
@@ -1470,7 +1470,7 @@ static int rx_init(struct atm_dev *dev)
 		buf_desc_ptr++;		  
 		rx_pkt_start += iadev->rx_buf_sz;  
 	}  
-	IF_INIT(printk("Rx Buffer desc ptr: 0x%0x\n", (u32)(buf_desc_ptr));)  
+	IF_INIT(printk("Rx Buffer desc ptr: 0x%p\n", buf_desc_ptr);)
         i = FREE_BUF_DESC_Q*iadev->memSize; 
 	writew(i >> 16,  iadev->reass_reg+REASS_QUEUE_BASE); 
         writew(i, iadev->reass_reg+FREEQ_ST_ADR);
@@ -1487,7 +1487,7 @@ static int rx_init(struct atm_dev *dev)
 		*freeq_start = (u_short)i;  
 		freeq_start++;  
 	}  
-	IF_INIT(printk("freeq_start: 0x%0x\n", (u32)freeq_start);)  
+	IF_INIT(printk("freeq_start: 0x%p\n", freeq_start);)
         /* Packet Complete Queue */
         i = (PKT_COMP_Q * iadev->memSize) & 0xffff;
         writew(i, iadev->reass_reg+PCQ_ST_ADR);
@@ -1713,7 +1713,7 @@ static void tx_dle_intr(struct atm_dev *dev)
                IA_SKB_STATE(skb) |= IA_DLED;
                skb_queue_tail(&iavcc->txing_skb, skb);
             }
-            IF_EVENT(printk("tx_dle_intr: enque skb = 0x%x \n", (u32)skb);)
+            IF_EVENT(printk("tx_dle_intr: enque skb = 0x%p \n", skb);)
             if (++dle == iadev->tx_dle_q.end)
                  dle = iadev->tx_dle_q.start;
         }
@@ -2044,8 +2044,8 @@ static int tx_init(struct atm_dev *dev)
         writew(tmp16, iadev->seg_reg+CBR_TAB_END+1); // CBR_PTR;
         tmp16 = (CBR_SCHED_TABLE*iadev->memSize + iadev->num_vc*6 - 2) >> 1;
         writew(tmp16, iadev->seg_reg+CBR_TAB_END);
-        IF_INIT(printk("iadev->seg_reg = 0x%x CBR_PTR_BASE = 0x%x\n",
-               (u32)iadev->seg_reg, readw(iadev->seg_reg+CBR_PTR_BASE));)
+        IF_INIT(printk("iadev->seg_reg = 0x%p CBR_PTR_BASE = 0x%x\n",
+               iadev->seg_reg, readw(iadev->seg_reg+CBR_PTR_BASE));)
         IF_INIT(printk("CBR_TAB_BEG = 0x%x, CBR_TAB_END = 0x%x, CBR_PTR = 0x%x\n",
           readw(iadev->seg_reg+CBR_TAB_BEG), readw(iadev->seg_reg+CBR_TAB_END),
           readw(iadev->seg_reg+CBR_TAB_END+1));)
@@ -2963,8 +2963,8 @@ static int ia_pkt_tx (struct atm_vcc *vcc, struct sk_buff *skb) {
  
 	/* Put the packet in a tx buffer */   
 	trailer = iadev->tx_buf[desc-1].cpcs;
-        IF_TX(printk("Sent: skb = 0x%x skb->data: 0x%x len: %d, desc: %d\n",
-                  (u32)skb, (u32)skb->data, skb->len, desc);)
+        IF_TX(printk("Sent: skb = 0x%p skb->data: 0x%p len: %d, desc: %d\n",
+                  skb, skb->data, skb->len, desc);)
 	trailer->control = 0; 
         /*big endian*/ 
 	trailer->length = ((skb->len & 0xff) << 8) | ((skb->len & 0xff00) >> 8);
@@ -3181,7 +3181,7 @@ static int __devinit ia_init_one(struct pci_dev *pdev,
 	}
 	dev->dev_data = iadev;
 	IF_INIT(printk(DEV_LABEL "registered at (itf :%d)\n", dev->number);)
-	IF_INIT(printk("dev_id = 0x%x iadev->LineRate = %d \n", (u32)dev,
+	IF_INIT(printk("dev_id = 0x%p iadev->LineRate = %d \n", dev,
 		iadev->LineRate);)
 
 	pci_set_drvdata(pdev, dev);
diff --git a/drivers/base/class.c b/drivers/base/class.c
index 839d27cecb36..cc5e28c8885c 100644
--- a/drivers/base/class.c
+++ b/drivers/base/class.c
@@ -198,6 +198,7 @@ static void class_create_release(struct class *cls)
  * class_create - create a struct class structure
  * @owner: pointer to the module that is to "own" this struct class
  * @name: pointer to a string for the name of this class.
+ * @key: the lock_class_key for this class; used by mutex lock debugging
  *
  * This is used to create a struct class pointer that can then be used
  * in calls to device_create().
@@ -294,6 +295,12 @@ int class_for_each_device(struct class *class, struct device *start,
 
 	if (!class)
 		return -EINVAL;
+	if (!class->p) {
+		WARN(1, "%s called for class '%s' before it was initialized",
+		     __func__, class->name);
+		return -EINVAL;
+	}
+
 	mutex_lock(&class->p->class_mutex);
 	list_for_each_entry(dev, &class->p->class_devices, node) {
 		if (start) {
@@ -343,6 +350,11 @@ struct device *class_find_device(struct class *class, struct device *start,
 
 	if (!class)
 		return NULL;
+	if (!class->p) {
+		WARN(1, "%s called for class '%s' before it was initialized",
+		     __func__, class->name);
+		return NULL;
+	}
 
 	mutex_lock(&class->p->class_mutex);
 	list_for_each_entry(dev, &class->p->class_devices, node) {
diff --git a/drivers/base/core.c b/drivers/base/core.c
index 7d5c63c81a59..d021c98605b3 100644
--- a/drivers/base/core.c
+++ b/drivers/base/core.c
@@ -53,7 +53,7 @@ static inline int device_is_not_partition(struct device *dev)
  * it is attached to.  If it is not attached to a bus either, an empty
  * string will be returned.
  */
-const char *dev_driver_string(struct device *dev)
+const char *dev_driver_string(const struct device *dev)
 {
 	return dev->driver ? dev->driver->name :
 			(dev->bus ? dev->bus->name :
@@ -116,12 +116,10 @@ static void device_release(struct kobject *kobj)
 		dev->type->release(dev);
 	else if (dev->class && dev->class->dev_release)
 		dev->class->dev_release(dev);
-	else {
-		printk(KERN_ERR "Device '%s' does not have a release() "
+	else
+		WARN(1, KERN_ERR "Device '%s' does not have a release() "
 			"function, it is broken and must be fixed.\n",
 			dev->bus_id);
-		WARN_ON(1);
-	}
 }
 
 static struct kobj_type device_ktype = {
@@ -543,6 +541,7 @@ void device_initialize(struct device *dev)
 	spin_lock_init(&dev->devres_lock);
 	INIT_LIST_HEAD(&dev->devres_head);
 	device_init_wakeup(dev, 0);
+	device_pm_init(dev);
 	set_dev_node(dev, -1);
 }
 
@@ -845,13 +844,19 @@ int device_add(struct device *dev)
 {
 	struct device *parent = NULL;
 	struct class_interface *class_intf;
-	int error;
+	int error = -EINVAL;
 
 	dev = get_device(dev);
-	if (!dev || !strlen(dev->bus_id)) {
-		error = -EINVAL;
-		goto Done;
-	}
+	if (!dev)
+		goto done;
+
+	/* Temporarily support init_name if it is set.
+	 * It will override bus_id for now */
+	if (dev->init_name)
+		dev_set_name(dev, "%s", dev->init_name);
+
+	if (!strlen(dev->bus_id))
+		goto done;
 
 	pr_debug("device: '%s': %s\n", dev->bus_id, __func__);
 
@@ -899,9 +904,10 @@ int device_add(struct device *dev)
 	error = bus_add_device(dev);
 	if (error)
 		goto BusError;
-	error = device_pm_add(dev);
+	error = dpm_sysfs_add(dev);
 	if (error)
-		goto PMError;
+		goto DPMError;
+	device_pm_add(dev);
 	kobject_uevent(&dev->kobj, KOBJ_ADD);
 	bus_attach_device(dev);
 	if (parent)
@@ -919,10 +925,10 @@ int device_add(struct device *dev)
 				class_intf->add_dev(dev, class_intf);
 		mutex_unlock(&dev->class->p->class_mutex);
 	}
- Done:
+done:
 	put_device(dev);
 	return error;
- PMError:
+ DPMError:
 	bus_remove_device(dev);
  BusError:
 	if (dev->bus)
@@ -946,7 +952,7 @@ int device_add(struct device *dev)
 	cleanup_device_parent(dev);
 	if (parent)
 		put_device(parent);
-	goto Done;
+	goto done;
 }
 
 /**
@@ -1009,6 +1015,7 @@ void device_del(struct device *dev)
 	struct class_interface *class_intf;
 
 	device_pm_remove(dev);
+	dpm_sysfs_remove(dev);
 	if (parent)
 		klist_del(&dev->knode_parent);
 	if (MAJOR(dev->devt)) {
diff --git a/drivers/base/driver.c b/drivers/base/driver.c
index 2ef5acf4368b..1e2bda780e48 100644
--- a/drivers/base/driver.c
+++ b/drivers/base/driver.c
@@ -16,9 +16,6 @@
 #include <linux/string.h>
 #include "base.h"
 
-#define to_dev(node) container_of(node, struct device, driver_list)
-
-
 static struct device *next_device(struct klist_iter *i)
 {
 	struct klist_node *n = klist_next(i);
diff --git a/drivers/base/firmware_class.c b/drivers/base/firmware_class.c
index b0be1d18fee2..c9c92b00fd55 100644
--- a/drivers/base/firmware_class.c
+++ b/drivers/base/firmware_class.c
@@ -184,7 +184,7 @@ firmware_data_read(struct kobject *kobj, struct bin_attribute *bin_attr,
 	struct device *dev = to_dev(kobj);
 	struct firmware_priv *fw_priv = dev_get_drvdata(dev);
 	struct firmware *fw;
-	ssize_t ret_count = count;
+	ssize_t ret_count;
 
 	mutex_lock(&fw_lock);
 	fw = fw_priv->fw;
@@ -192,14 +192,8 @@ firmware_data_read(struct kobject *kobj, struct bin_attribute *bin_attr,
 		ret_count = -ENODEV;
 		goto out;
 	}
-	if (offset > fw->size) {
-		ret_count = 0;
-		goto out;
-	}
-	if (offset + ret_count > fw->size)
-		ret_count = fw->size - offset;
-
-	memcpy(buffer, fw->data + offset, ret_count);
+	ret_count = memory_read_from_buffer(buffer, count, &offset,
+						fw->data, fw->size);
 out:
 	mutex_unlock(&fw_lock);
 	return ret_count;
diff --git a/drivers/base/isa.c b/drivers/base/isa.c
index d2222397a401..efd577574948 100644
--- a/drivers/base/isa.c
+++ b/drivers/base/isa.c
@@ -7,6 +7,7 @@
 #include <linux/slab.h>
 #include <linux/module.h>
 #include <linux/init.h>
+#include <linux/dma-mapping.h>
 #include <linux/isa.h>
 
 static struct device isa_bus = {
@@ -141,6 +142,9 @@ int isa_register_driver(struct isa_driver *isa_driver, unsigned int ndev)
 		isa_dev->dev.release		= isa_dev_release;
 		isa_dev->id			= id;
 
+		isa_dev->dev.coherent_dma_mask = DMA_24BIT_MASK;
+		isa_dev->dev.dma_mask = &isa_dev->dev.coherent_dma_mask;
+
 		error = device_register(&isa_dev->dev);
 		if (error) {
 			put_device(&isa_dev->dev);
diff --git a/drivers/base/memory.c b/drivers/base/memory.c
index 855ed1a9f97b..af0d175c025d 100644
--- a/drivers/base/memory.c
+++ b/drivers/base/memory.c
@@ -103,7 +103,8 @@ static ssize_t show_mem_phys_index(struct sys_device *dev,
 /*
  * Show whether the section of memory is likely to be hot-removable
  */
-static ssize_t show_mem_removable(struct sys_device *dev, char *buf)
+static ssize_t show_mem_removable(struct sys_device *dev,
+			struct sysdev_attribute *attr, char *buf)
 {
 	unsigned long start_pfn;
 	int ret;
@@ -204,9 +205,8 @@ memory_block_action(struct memory_block *mem, unsigned long action)
 			}
 			break;
 		default:
-			printk(KERN_WARNING "%s(%p, %ld) unknown action: %ld\n",
+			WARN(1, KERN_WARNING "%s(%p, %ld) unknown action: %ld\n",
 					__func__, mem, action, action);
-			WARN_ON(1);
 			ret = -EINVAL;
 	}
 
diff --git a/drivers/base/power/main.c b/drivers/base/power/main.c
index 3250c5257b74..273a944d4040 100644
--- a/drivers/base/power/main.c
+++ b/drivers/base/power/main.c
@@ -67,20 +67,16 @@ void device_pm_unlock(void)
  *	device_pm_add - add a device to the list of active devices
  *	@dev:	Device to be added to the list
  */
-int device_pm_add(struct device *dev)
+void device_pm_add(struct device *dev)
 {
-	int error;
-
 	pr_debug("PM: Adding info for %s:%s\n",
 		 dev->bus ? dev->bus->name : "No Bus",
 		 kobject_name(&dev->kobj));
 	mutex_lock(&dpm_list_mtx);
 	if (dev->parent) {
-		if (dev->parent->power.status >= DPM_SUSPENDING) {
-			dev_warn(dev, "parent %s is sleeping, will not add\n",
+		if (dev->parent->power.status >= DPM_SUSPENDING)
+			dev_warn(dev, "parent %s should not be sleeping\n",
 				dev->parent->bus_id);
-			WARN_ON(true);
-		}
 	} else if (transition_started) {
 		/*
 		 * We refuse to register parentless devices while a PM
@@ -89,13 +85,9 @@ int device_pm_add(struct device *dev)
 		 */
 		WARN_ON(true);
 	}
-	error = dpm_sysfs_add(dev);
-	if (!error) {
-		dev->power.status = DPM_ON;
-		list_add_tail(&dev->power.entry, &dpm_list);
-	}
+
+	list_add_tail(&dev->power.entry, &dpm_list);
 	mutex_unlock(&dpm_list_mtx);
-	return error;
 }
 
 /**
@@ -110,7 +102,6 @@ void device_pm_remove(struct device *dev)
 		 dev->bus ? dev->bus->name : "No Bus",
 		 kobject_name(&dev->kobj));
 	mutex_lock(&dpm_list_mtx);
-	dpm_sysfs_remove(dev);
 	list_del_init(&dev->power.entry);
 	mutex_unlock(&dpm_list_mtx);
 }
diff --git a/drivers/base/power/power.h b/drivers/base/power/power.h
index a3252c0e2887..41f51fae042f 100644
--- a/drivers/base/power/power.h
+++ b/drivers/base/power/power.h
@@ -1,3 +1,8 @@
+static inline void device_pm_init(struct device *dev)
+{
+	dev->power.status = DPM_ON;
+}
+
 #ifdef CONFIG_PM_SLEEP
 
 /*
@@ -11,12 +16,12 @@ static inline struct device *to_device(struct list_head *entry)
 	return container_of(entry, struct device, power.entry);
 }
 
-extern int device_pm_add(struct device *);
+extern void device_pm_add(struct device *);
 extern void device_pm_remove(struct device *);
 
 #else /* CONFIG_PM_SLEEP */
 
-static inline int device_pm_add(struct device *dev) { return 0; }
+static inline void device_pm_add(struct device *dev) {}
 static inline void device_pm_remove(struct device *dev) {}
 
 #endif
diff --git a/drivers/base/sys.c b/drivers/base/sys.c
index 40fc14f03540..75dd6e22faff 100644
--- a/drivers/base/sys.c
+++ b/drivers/base/sys.c
@@ -168,19 +168,16 @@ int sysdev_driver_register(struct sysdev_class *cls, struct sysdev_driver *drv)
 	int err = 0;
 
 	if (!cls) {
-		printk(KERN_WARNING "sysdev: invalid class passed to "
+		WARN(1, KERN_WARNING "sysdev: invalid class passed to "
 			"sysdev_driver_register!\n");
-		WARN_ON(1);
 		return -EINVAL;
 	}
 
 	/* Check whether this driver has already been added to a class. */
-	if (drv->entry.next && !list_empty(&drv->entry)) {
-		printk(KERN_WARNING "sysdev: class %s: driver (%p) has already"
+	if (drv->entry.next && !list_empty(&drv->entry))
+		WARN(1, KERN_WARNING "sysdev: class %s: driver (%p) has already"
 			" been registered to a class, something is wrong, but "
 			"will forge on!\n", cls->name, drv);
-		WARN_ON(1);
-	}
 
 	mutex_lock(&sysdev_drivers_lock);
 	if (cls && kset_get(&cls->kset)) {
@@ -194,8 +191,7 @@ int sysdev_driver_register(struct sysdev_class *cls, struct sysdev_driver *drv)
 		}
 	} else {
 		err = -EINVAL;
-		printk(KERN_ERR "%s: invalid device class\n", __func__);
-		WARN_ON(1);
+		WARN(1, KERN_ERR "%s: invalid device class\n", __func__);
 	}
 	mutex_unlock(&sysdev_drivers_lock);
 	return err;
diff --git a/drivers/block/aoe/aoechr.c b/drivers/block/aoe/aoechr.c
index c04440cd6a32..181ebb85f0be 100644
--- a/drivers/block/aoe/aoechr.c
+++ b/drivers/block/aoe/aoechr.c
@@ -6,6 +6,7 @@
 
 #include <linux/hdreg.h>
 #include <linux/blkdev.h>
+#include <linux/completion.h>
 #include <linux/delay.h>
 #include <linux/smp_lock.h>
 #include "aoe.h"
@@ -36,7 +37,7 @@ struct ErrMsg {
 
 static struct ErrMsg emsgs[NMSG];
 static int emsgs_head_idx, emsgs_tail_idx;
-static struct semaphore emsgs_sema;
+static struct completion emsgs_comp;
 static spinlock_t emsgs_lock;
 static int nblocked_emsgs_readers;
 static struct class *aoe_class;
@@ -141,7 +142,7 @@ bail:		spin_unlock_irqrestore(&emsgs_lock, flags);
 	spin_unlock_irqrestore(&emsgs_lock, flags);
 
 	if (nblocked_emsgs_readers)
-		up(&emsgs_sema);
+		complete(&emsgs_comp);
 }
 
 static ssize_t
@@ -221,7 +222,7 @@ aoechr_read(struct file *filp, char __user *buf, size_t cnt, loff_t *off)
 
 		spin_unlock_irqrestore(&emsgs_lock, flags);
 
-		n = down_interruptible(&emsgs_sema);
+		n = wait_for_completion_interruptible(&emsgs_comp);
 
 		spin_lock_irqsave(&emsgs_lock, flags);
 
@@ -269,7 +270,7 @@ aoechr_init(void)
 		printk(KERN_ERR "aoe: can't register char device\n");
 		return n;
 	}
-	sema_init(&emsgs_sema, 0);
+	init_completion(&emsgs_comp);
 	spin_lock_init(&emsgs_lock);
 	aoe_class = class_create(THIS_MODULE, "aoe");
 	if (IS_ERR(aoe_class)) {
diff --git a/drivers/block/aoe/aoenet.c b/drivers/block/aoe/aoenet.c
index d625169c8e48..0c81ca731287 100644
--- a/drivers/block/aoe/aoenet.c
+++ b/drivers/block/aoe/aoenet.c
@@ -30,7 +30,7 @@ enum {
 
 static char aoe_iflist[IFLISTSZ];
 module_param_string(aoe_iflist, aoe_iflist, IFLISTSZ, 0600);
-MODULE_PARM_DESC(aoe_iflist, "aoe_iflist=\"dev1 [dev2 ...]\"\n");
+MODULE_PARM_DESC(aoe_iflist, "aoe_iflist=\"dev1 [dev2 ...]\"");
 
 #ifndef MODULE
 static int __init aoe_iflist_setup(char *str)
diff --git a/drivers/block/brd.c b/drivers/block/brd.c
index 24b97b0bef99..d070d492e385 100644
--- a/drivers/block/brd.c
+++ b/drivers/block/brd.c
@@ -571,8 +571,8 @@ out_free:
 		list_del(&brd->brd_list);
 		brd_free(brd);
 	}
+	unregister_blkdev(RAMDISK_MAJOR, "ramdisk");
 
-	unregister_blkdev(RAMDISK_MAJOR, "brd");
 	return -ENOMEM;
 }
 
diff --git a/drivers/block/cciss.c b/drivers/block/cciss.c
index d81632cd7d06..b73116ef9236 100644
--- a/drivers/block/cciss.c
+++ b/drivers/block/cciss.c
@@ -159,7 +159,7 @@ static int cciss_ioctl(struct inode *inode, struct file *filep,
 static int cciss_getgeo(struct block_device *bdev, struct hd_geometry *geo);
 
 static int cciss_revalidate(struct gendisk *disk);
-static int rebuild_lun_table(ctlr_info_t *h, struct gendisk *del_disk);
+static int rebuild_lun_table(ctlr_info_t *h, int first_time);
 static int deregister_disk(struct gendisk *disk, drive_info_struct *drv,
 			   int clear_all);
 
@@ -171,7 +171,6 @@ static void cciss_geometry_inquiry(int ctlr, int logvol,
 			int withirq, sector_t total_size,
 			unsigned int block_size, InquiryData_struct *inq_buff,
 				   drive_info_struct *drv);
-static void cciss_getgeometry(int cntl_num);
 static void __devinit cciss_interrupt_mode(ctlr_info_t *, struct pci_dev *,
 					   __u32);
 static void start_io(ctlr_info_t *h);
@@ -929,8 +928,10 @@ static int cciss_ioctl(struct inode *inode, struct file *filep,
 			return 0;
 		}
 
+	case CCISS_DEREGDISK:
+	case CCISS_REGNEWD:
 	case CCISS_REVALIDVOLS:
-		return rebuild_lun_table(host, NULL);
+		return rebuild_lun_table(host, 0);
 
 	case CCISS_GETLUNINFO:{
 			LogvolInfo_struct luninfo;
@@ -943,12 +944,6 @@ static int cciss_ioctl(struct inode *inode, struct file *filep,
 				return -EFAULT;
 			return 0;
 		}
-	case CCISS_DEREGDISK:
-		return rebuild_lun_table(host, disk);
-
-	case CCISS_REGNEWD:
-		return rebuild_lun_table(host, NULL);
-
 	case CCISS_PASSTHRU:
 		{
 			IOCTL_Command_struct iocommand;
@@ -1134,7 +1129,7 @@ static int cciss_ioctl(struct inode *inode, struct file *filep,
 				if (ioc->Request.Type.Direction == XFER_WRITE) {
 					if (copy_from_user
 					    (buff[sg_used], data_ptr, sz)) {
-						status = -ENOMEM;
+						status = -EFAULT;
 						goto cleanup1;
 					}
 				} else {
@@ -1292,8 +1287,6 @@ static void cciss_check_queues(ctlr_info_t *h)
 				h->next_to_run = curr_queue;
 				break;
 			}
-		} else {
-			curr_queue = (curr_queue + 1) % (h->highest_lun + 1);
 		}
 	}
 }
@@ -1332,15 +1325,84 @@ static void cciss_softirq_done(struct request *rq)
 	spin_unlock_irqrestore(&h->lock, flags);
 }
 
+/* This function gets the serial number of a logical drive via
+ * inquiry page 0x83.  Serial no. is 16 bytes.  If the serial
+ * number cannot be had, for whatever reason, 16 bytes of 0xff
+ * are returned instead.
+ */
+static void cciss_get_serial_no(int ctlr, int logvol, int withirq,
+				unsigned char *serial_no, int buflen)
+{
+#define PAGE_83_INQ_BYTES 64
+	int rc;
+	unsigned char *buf;
+
+	if (buflen > 16)
+		buflen = 16;
+	memset(serial_no, 0xff, buflen);
+	buf = kzalloc(PAGE_83_INQ_BYTES, GFP_KERNEL);
+	if (!buf)
+		return;
+	memset(serial_no, 0, buflen);
+	if (withirq)
+		rc = sendcmd_withirq(CISS_INQUIRY, ctlr, buf,
+			PAGE_83_INQ_BYTES, 1, logvol, 0x83, TYPE_CMD);
+	else
+		rc = sendcmd(CISS_INQUIRY, ctlr, buf,
+			PAGE_83_INQ_BYTES, 1, logvol, 0x83, NULL, TYPE_CMD);
+	if (rc == IO_OK)
+		memcpy(serial_no, &buf[8], buflen);
+	kfree(buf);
+	return;
+}
+
+static void cciss_add_disk(ctlr_info_t *h, struct gendisk *disk,
+				int drv_index)
+{
+	disk->queue = blk_init_queue(do_cciss_request, &h->lock);
+	sprintf(disk->disk_name, "cciss/c%dd%d", h->ctlr, drv_index);
+	disk->major = h->major;
+	disk->first_minor = drv_index << NWD_SHIFT;
+	disk->fops = &cciss_fops;
+	disk->private_data = &h->drv[drv_index];
+
+	/* Set up queue information */
+	blk_queue_bounce_limit(disk->queue, h->pdev->dma_mask);
+
+	/* This is a hardware imposed limit. */
+	blk_queue_max_hw_segments(disk->queue, MAXSGENTRIES);
+
+	/* This is a limit in the driver and could be eliminated. */
+	blk_queue_max_phys_segments(disk->queue, MAXSGENTRIES);
+
+	blk_queue_max_sectors(disk->queue, h->cciss_max_sectors);
+
+	blk_queue_softirq_done(disk->queue, cciss_softirq_done);
+
+	disk->queue->queuedata = h;
+
+	blk_queue_hardsect_size(disk->queue,
+				h->drv[drv_index].block_size);
+
+	/* Make sure all queue data is written out before */
+	/* setting h->drv[drv_index].queue, as setting this */
+	/* allows the interrupt handler to start the queue */
+	wmb();
+	h->drv[drv_index].queue = disk->queue;
+	add_disk(disk);
+}
+
 /* This function will check the usage_count of the drive to be updated/added.
- * If the usage_count is zero then the drive information will be updated and
- * the disk will be re-registered with the kernel.  If not then it will be
- * left alone for the next reboot.  The exception to this is disk 0 which
- * will always be left registered with the kernel since it is also the
- * controller node.  Any changes to disk 0 will show up on the next
- * reboot.
+ * If the usage_count is zero and it is a heretofore unknown drive, or,
+ * the drive's capacity, geometry, or serial number has changed,
+ * then the drive information will be updated and the disk will be
+ * re-registered with the kernel.  If these conditions don't hold,
+ * then it will be left alone for the next reboot.  The exception to this
+ * is disk 0 which will always be left registered with the kernel since it
+ * is also the controller node.  Any changes to disk 0 will show up on
+ * the next reboot.
  */
-static void cciss_update_drive_info(int ctlr, int drv_index)
+static void cciss_update_drive_info(int ctlr, int drv_index, int first_time)
 {
 	ctlr_info_t *h = hba[ctlr];
 	struct gendisk *disk;
@@ -1349,16 +1411,81 @@ static void cciss_update_drive_info(int ctlr, int drv_index)
 	sector_t total_size;
 	unsigned long flags = 0;
 	int ret = 0;
+	drive_info_struct *drvinfo;
+	int was_only_controller_node;
+
+	/* Get information about the disk and modify the driver structure */
+	inq_buff = kmalloc(sizeof(InquiryData_struct), GFP_KERNEL);
+	drvinfo = kmalloc(sizeof(*drvinfo), GFP_KERNEL);
+	if (inq_buff == NULL || drvinfo == NULL)
+		goto mem_msg;
+
+	/* See if we're trying to update the "controller node"
+	 * this will happen the when the first logical drive gets
+	 * created by ACU.
+	 */
+	was_only_controller_node = (drv_index == 0 &&
+				h->drv[0].raid_level == -1);
 
-	/* if the disk already exists then deregister it before proceeding */
-	if (h->drv[drv_index].raid_level != -1) {
+	/* testing to see if 16-byte CDBs are already being used */
+	if (h->cciss_read == CCISS_READ_16) {
+		cciss_read_capacity_16(h->ctlr, drv_index, 1,
+			&total_size, &block_size);
+
+	} else {
+		cciss_read_capacity(ctlr, drv_index, 1,
+				    &total_size, &block_size);
+
+		/* if read_capacity returns all F's this volume is >2TB */
+		/* in size so we switch to 16-byte CDB's for all */
+		/* read/write ops */
+		if (total_size == 0xFFFFFFFFULL) {
+			cciss_read_capacity_16(ctlr, drv_index, 1,
+			&total_size, &block_size);
+			h->cciss_read = CCISS_READ_16;
+			h->cciss_write = CCISS_WRITE_16;
+		} else {
+			h->cciss_read = CCISS_READ_10;
+			h->cciss_write = CCISS_WRITE_10;
+		}
+	}
+
+	cciss_geometry_inquiry(ctlr, drv_index, 1, total_size, block_size,
+			       inq_buff, drvinfo);
+	drvinfo->block_size = block_size;
+	drvinfo->nr_blocks = total_size + 1;
+
+	cciss_get_serial_no(ctlr, drv_index, 1, drvinfo->serial_no,
+			sizeof(drvinfo->serial_no));
+
+	/* Is it the same disk we already know, and nothing's changed? */
+	if (h->drv[drv_index].raid_level != -1 &&
+		((memcmp(drvinfo->serial_no,
+				h->drv[drv_index].serial_no, 16) == 0) &&
+		drvinfo->block_size == h->drv[drv_index].block_size &&
+		drvinfo->nr_blocks == h->drv[drv_index].nr_blocks &&
+		drvinfo->heads == h->drv[drv_index].heads &&
+		drvinfo->sectors == h->drv[drv_index].sectors &&
+		drvinfo->cylinders == h->drv[drv_index].cylinders))
+			/* The disk is unchanged, nothing to update */
+			goto freeret;
+
+	/* If we get here it's not the same disk, or something's changed,
+	 * so we need to * deregister it, and re-register it, if it's not
+	 * in use.
+	 * If the disk already exists then deregister it before proceeding
+	 * (unless it's the first disk (for the controller node).
+	 */
+	if (h->drv[drv_index].raid_level != -1 && drv_index != 0) {
+		printk(KERN_WARNING "disk %d has changed.\n", drv_index);
 		spin_lock_irqsave(CCISS_LOCK(h->ctlr), flags);
 		h->drv[drv_index].busy_configuring = 1;
 		spin_unlock_irqrestore(CCISS_LOCK(h->ctlr), flags);
 
-		/* deregister_disk sets h->drv[drv_index].queue = NULL */
-		/* which keeps the interrupt handler from starting */
-		/* the queue. */
+		/* deregister_disk sets h->drv[drv_index].queue = NULL
+		 * which keeps the interrupt handler from starting
+		 * the queue.
+		 */
 		ret = deregister_disk(h->gendisk[drv_index],
 				      &h->drv[drv_index], 0);
 		h->drv[drv_index].busy_configuring = 0;
@@ -1366,81 +1493,37 @@ static void cciss_update_drive_info(int ctlr, int drv_index)
 
 	/* If the disk is in use return */
 	if (ret)
-		return;
+		goto freeret;
 
-	/* Get information about the disk and modify the driver structure */
-	inq_buff = kmalloc(sizeof(InquiryData_struct), GFP_KERNEL);
-	if (inq_buff == NULL)
-		goto mem_msg;
-
- 	/* testing to see if 16-byte CDBs are already being used */
- 	if (h->cciss_read == CCISS_READ_16) {
- 		cciss_read_capacity_16(h->ctlr, drv_index, 1,
- 			&total_size, &block_size);
- 		goto geo_inq;
- 	}
-
-	cciss_read_capacity(ctlr, drv_index, 1,
-			    &total_size, &block_size);
-
-  	/* if read_capacity returns all F's this volume is >2TB in size */
-  	/* so we switch to 16-byte CDB's for all read/write ops */
-  	if (total_size == 0xFFFFFFFFULL) {
-		cciss_read_capacity_16(ctlr, drv_index, 1,
-		&total_size, &block_size);
-		h->cciss_read = CCISS_READ_16;
-		h->cciss_write = CCISS_WRITE_16;
-	} else {
-		h->cciss_read = CCISS_READ_10;
-		h->cciss_write = CCISS_WRITE_10;
-	}
-geo_inq:
-	cciss_geometry_inquiry(ctlr, drv_index, 1, total_size, block_size,
-			       inq_buff, &h->drv[drv_index]);
+	/* Save the new information from cciss_geometry_inquiry
+	 * and serial number inquiry.
+	 */
+	h->drv[drv_index].block_size = drvinfo->block_size;
+	h->drv[drv_index].nr_blocks = drvinfo->nr_blocks;
+	h->drv[drv_index].heads = drvinfo->heads;
+	h->drv[drv_index].sectors = drvinfo->sectors;
+	h->drv[drv_index].cylinders = drvinfo->cylinders;
+	h->drv[drv_index].raid_level = drvinfo->raid_level;
+	memcpy(h->drv[drv_index].serial_no, drvinfo->serial_no, 16);
 
 	++h->num_luns;
 	disk = h->gendisk[drv_index];
 	set_capacity(disk, h->drv[drv_index].nr_blocks);
 
-	/* if it's the controller it's already added */
-	if (drv_index) {
-		disk->queue = blk_init_queue(do_cciss_request, &h->lock);
-		sprintf(disk->disk_name, "cciss/c%dd%d", ctlr, drv_index);
-		disk->major = h->major;
-		disk->first_minor = drv_index << NWD_SHIFT;
-		disk->fops = &cciss_fops;
-		disk->private_data = &h->drv[drv_index];
-
-		/* Set up queue information */
-		blk_queue_bounce_limit(disk->queue, hba[ctlr]->pdev->dma_mask);
-
-		/* This is a hardware imposed limit. */
-		blk_queue_max_hw_segments(disk->queue, MAXSGENTRIES);
-
-		/* This is a limit in the driver and could be eliminated. */
-		blk_queue_max_phys_segments(disk->queue, MAXSGENTRIES);
-
-		blk_queue_max_sectors(disk->queue, h->cciss_max_sectors);
-
-		blk_queue_softirq_done(disk->queue, cciss_softirq_done);
-
-		disk->queue->queuedata = hba[ctlr];
-
-		blk_queue_hardsect_size(disk->queue,
-					hba[ctlr]->drv[drv_index].block_size);
-
-		/* Make sure all queue data is written out before */
-		/* setting h->drv[drv_index].queue, as setting this */
-		/* allows the interrupt handler to start the queue */
-		wmb();
-		h->drv[drv_index].queue = disk->queue;
-		add_disk(disk);
-	}
+	/* If it's not disk 0 (drv_index != 0)
+	 * or if it was disk 0, but there was previously
+	 * no actual corresponding configured logical drive
+	 * (raid_leve == -1) then we want to update the
+	 * logical drive's information.
+	 */
+	if (drv_index || first_time)
+		cciss_add_disk(h, disk, drv_index);
 
-      freeret:
+freeret:
 	kfree(inq_buff);
+	kfree(drvinfo);
 	return;
-      mem_msg:
+mem_msg:
 	printk(KERN_ERR "cciss: out of memory\n");
 	goto freeret;
 }
@@ -1450,21 +1533,91 @@ geo_inq:
  * where new drives will be added.  If the index to be returned is greater
  * than the highest_lun index for the controller then highest_lun is set
  * to this new index.  If there are no available indexes then -1 is returned.
+ * "controller_node" is used to know if this is a real logical drive, or just
+ * the controller node, which determines if this counts towards highest_lun.
  */
-static int cciss_find_free_drive_index(int ctlr)
+static int cciss_find_free_drive_index(int ctlr, int controller_node)
 {
 	int i;
 
 	for (i = 0; i < CISS_MAX_LUN; i++) {
 		if (hba[ctlr]->drv[i].raid_level == -1) {
 			if (i > hba[ctlr]->highest_lun)
-				hba[ctlr]->highest_lun = i;
+				if (!controller_node)
+					hba[ctlr]->highest_lun = i;
 			return i;
 		}
 	}
 	return -1;
 }
 
+/* cciss_add_gendisk finds a free hba[]->drv structure
+ * and allocates a gendisk if needed, and sets the lunid
+ * in the drvinfo structure.   It returns the index into
+ * the ->drv[] array, or -1 if none are free.
+ * is_controller_node indicates whether highest_lun should
+ * count this disk, or if it's only being added to provide
+ * a means to talk to the controller in case no logical
+ * drives have yet been configured.
+ */
+static int cciss_add_gendisk(ctlr_info_t *h, __u32 lunid, int controller_node)
+{
+	int drv_index;
+
+	drv_index = cciss_find_free_drive_index(h->ctlr, controller_node);
+	if (drv_index == -1)
+		return -1;
+	/*Check if the gendisk needs to be allocated */
+	if (!h->gendisk[drv_index]) {
+		h->gendisk[drv_index] =
+			alloc_disk(1 << NWD_SHIFT);
+		if (!h->gendisk[drv_index]) {
+			printk(KERN_ERR "cciss%d: could not "
+				"allocate a new disk %d\n",
+				h->ctlr, drv_index);
+			return -1;
+		}
+	}
+	h->drv[drv_index].LunID = lunid;
+
+	/* Don't need to mark this busy because nobody */
+	/* else knows about this disk yet to contend */
+	/* for access to it. */
+	h->drv[drv_index].busy_configuring = 0;
+	wmb();
+	return drv_index;
+}
+
+/* This is for the special case of a controller which
+ * has no logical drives.  In this case, we still need
+ * to register a disk so the controller can be accessed
+ * by the Array Config Utility.
+ */
+static void cciss_add_controller_node(ctlr_info_t *h)
+{
+	struct gendisk *disk;
+	int drv_index;
+
+	if (h->gendisk[0] != NULL) /* already did this? Then bail. */
+		return;
+
+	drv_index = cciss_add_gendisk(h, 0, 1);
+	if (drv_index == -1) {
+		printk(KERN_WARNING "cciss%d: could not "
+			"add disk 0.\n", h->ctlr);
+		return;
+	}
+	h->drv[drv_index].block_size = 512;
+	h->drv[drv_index].nr_blocks = 0;
+	h->drv[drv_index].heads = 0;
+	h->drv[drv_index].sectors = 0;
+	h->drv[drv_index].cylinders = 0;
+	h->drv[drv_index].raid_level = -1;
+	memset(h->drv[drv_index].serial_no, 0, 16);
+	disk = h->gendisk[drv_index];
+	cciss_add_disk(h, disk, drv_index);
+}
+
 /* This function will add and remove logical drives from the Logical
  * drive array of the controller and maintain persistency of ordering
  * so that mount points are preserved until the next reboot.  This allows
@@ -1472,15 +1625,12 @@ static int cciss_find_free_drive_index(int ctlr)
  * without a re-ordering of those drives.
  * INPUT
  * h		= The controller to perform the operations on
- * del_disk	= The disk to remove if specified.  If the value given
- *		  is NULL then no disk is removed.
  */
-static int rebuild_lun_table(ctlr_info_t *h, struct gendisk *del_disk)
+static int rebuild_lun_table(ctlr_info_t *h, int first_time)
 {
 	int ctlr = h->ctlr;
 	int num_luns;
 	ReportLunData_struct *ld_buff = NULL;
-	drive_info_struct *drv = NULL;
 	int return_code;
 	int listlength = 0;
 	int i;
@@ -1489,6 +1639,9 @@ static int rebuild_lun_table(ctlr_info_t *h, struct gendisk *del_disk)
 	__u32 lunid = 0;
 	unsigned long flags;
 
+	if (!capable(CAP_SYS_RAWIO))
+		return -EPERM;
+
 	/* Set busy_configuring flag for this operation */
 	spin_lock_irqsave(CCISS_LOCK(h->ctlr), flags);
 	if (h->busy_configuring) {
@@ -1496,100 +1649,100 @@ static int rebuild_lun_table(ctlr_info_t *h, struct gendisk *del_disk)
 		return -EBUSY;
 	}
 	h->busy_configuring = 1;
+	spin_unlock_irqrestore(CCISS_LOCK(h->ctlr), flags);
 
-	/* if del_disk is NULL then we are being called to add a new disk
-	 * and update the logical drive table.  If it is not NULL then
-	 * we will check if the disk is in use or not.
-	 */
-	if (del_disk != NULL) {
-		drv = get_drv(del_disk);
-		drv->busy_configuring = 1;
-		spin_unlock_irqrestore(CCISS_LOCK(h->ctlr), flags);
-		return_code = deregister_disk(del_disk, drv, 1);
-		drv->busy_configuring = 0;
-		h->busy_configuring = 0;
-		return return_code;
-	} else {
-		spin_unlock_irqrestore(CCISS_LOCK(h->ctlr), flags);
-		if (!capable(CAP_SYS_RAWIO))
-			return -EPERM;
+	ld_buff = kzalloc(sizeof(ReportLunData_struct), GFP_KERNEL);
+	if (ld_buff == NULL)
+		goto mem_msg;
 
-		ld_buff = kzalloc(sizeof(ReportLunData_struct), GFP_KERNEL);
-		if (ld_buff == NULL)
-			goto mem_msg;
-
-		return_code = sendcmd_withirq(CISS_REPORT_LOG, ctlr, ld_buff,
-					      sizeof(ReportLunData_struct), 0,
-					      0, 0, TYPE_CMD);
-
-		if (return_code == IO_OK) {
-			listlength =
-				be32_to_cpu(*(__be32 *) ld_buff->LUNListLength);
-		} else {	/* reading number of logical volumes failed */
-			printk(KERN_WARNING "cciss: report logical volume"
-			       " command failed\n");
-			listlength = 0;
-			goto freeret;
-		}
+	return_code = sendcmd_withirq(CISS_REPORT_LOG, ctlr, ld_buff,
+				      sizeof(ReportLunData_struct), 0,
+				      0, 0, TYPE_CMD);
+
+	if (return_code == IO_OK)
+		listlength = be32_to_cpu(*(__be32 *) ld_buff->LUNListLength);
+	else {	/* reading number of logical volumes failed */
+		printk(KERN_WARNING "cciss: report logical volume"
+		       " command failed\n");
+		listlength = 0;
+		goto freeret;
+	}
+
+	num_luns = listlength / 8;	/* 8 bytes per entry */
+	if (num_luns > CISS_MAX_LUN) {
+		num_luns = CISS_MAX_LUN;
+		printk(KERN_WARNING "cciss: more luns configured"
+		       " on controller than can be handled by"
+		       " this driver.\n");
+	}
 
-		num_luns = listlength / 8;	/* 8 bytes per entry */
-		if (num_luns > CISS_MAX_LUN) {
-			num_luns = CISS_MAX_LUN;
-			printk(KERN_WARNING "cciss: more luns configured"
-			       " on controller than can be handled by"
-			       " this driver.\n");
+	if (num_luns == 0)
+		cciss_add_controller_node(h);
+
+	/* Compare controller drive array to driver's drive array
+	 * to see if any drives are missing on the controller due
+	 * to action of Array Config Utility (user deletes drive)
+	 * and deregister logical drives which have disappeared.
+	 */
+	for (i = 0; i <= h->highest_lun; i++) {
+		int j;
+		drv_found = 0;
+		for (j = 0; j < num_luns; j++) {
+			memcpy(&lunid, &ld_buff->LUN[j][0], 4);
+			lunid = le32_to_cpu(lunid);
+			if (h->drv[i].LunID == lunid) {
+				drv_found = 1;
+				break;
+			}
+		}
+		if (!drv_found) {
+			/* Deregister it from the OS, it's gone. */
+			spin_lock_irqsave(CCISS_LOCK(h->ctlr), flags);
+			h->drv[i].busy_configuring = 1;
+			spin_unlock_irqrestore(CCISS_LOCK(h->ctlr), flags);
+			return_code = deregister_disk(h->gendisk[i],
+				&h->drv[i], 1);
+			h->drv[i].busy_configuring = 0;
 		}
+	}
+
+	/* Compare controller drive array to driver's drive array.
+	 * Check for updates in the drive information and any new drives
+	 * on the controller due to ACU adding logical drives, or changing
+	 * a logical drive's size, etc.  Reregister any new/changed drives
+	 */
+	for (i = 0; i < num_luns; i++) {
+		int j;
+
+		drv_found = 0;
+
+		memcpy(&lunid, &ld_buff->LUN[i][0], 4);
+		lunid = le32_to_cpu(lunid);
 
-		/* Compare controller drive array to drivers drive array.
-		 * Check for updates in the drive information and any new drives
-		 * on the controller.
+		/* Find if the LUN is already in the drive array
+		 * of the driver.  If so then update its info
+		 * if not in use.  If it does not exist then find
+		 * the first free index and add it.
 		 */
-		for (i = 0; i < num_luns; i++) {
-			int j;
-
-			drv_found = 0;
-
-			lunid = (0xff &
-				 (unsigned int)(ld_buff->LUN[i][3])) << 24;
-			lunid |= (0xff &
-				  (unsigned int)(ld_buff->LUN[i][2])) << 16;
-			lunid |= (0xff &
-				  (unsigned int)(ld_buff->LUN[i][1])) << 8;
-			lunid |= 0xff & (unsigned int)(ld_buff->LUN[i][0]);
-
-			/* Find if the LUN is already in the drive array
-			 * of the controller.  If so then update its info
-			 * if not is use.  If it does not exist then find
-			 * the first free index and add it.
-			 */
-			for (j = 0; j <= h->highest_lun; j++) {
-				if (h->drv[j].LunID == lunid) {
-					drv_index = j;
-					drv_found = 1;
-				}
+		for (j = 0; j <= h->highest_lun; j++) {
+			if (h->drv[j].raid_level != -1 &&
+				h->drv[j].LunID == lunid) {
+				drv_index = j;
+				drv_found = 1;
+				break;
 			}
+		}
 
-			/* check if the drive was found already in the array */
-			if (!drv_found) {
-				drv_index = cciss_find_free_drive_index(ctlr);
-				if (drv_index == -1)
-					goto freeret;
-
-				/*Check if the gendisk needs to be allocated */
-				if (!h->gendisk[drv_index]){
-					h->gendisk[drv_index] = alloc_disk(1 << NWD_SHIFT);
-					if (!h->gendisk[drv_index]){
-						printk(KERN_ERR "cciss: could not allocate new disk %d\n", drv_index);
-						goto mem_msg;
-					}
-				}
-			}
-			h->drv[drv_index].LunID = lunid;
-			cciss_update_drive_info(ctlr, drv_index);
-		}		/* end for */
-	}			/* end else */
+		/* check if the drive was found already in the array */
+		if (!drv_found) {
+			drv_index = cciss_add_gendisk(h, lunid, 0);
+			if (drv_index == -1)
+				goto freeret;
+		}
+		cciss_update_drive_info(ctlr, drv_index, first_time);
+	}		/* end for */
 
-      freeret:
+freeret:
 	kfree(ld_buff);
 	h->busy_configuring = 0;
 	/* We return -1 here to tell the ACU that we have registered/updated
@@ -1597,8 +1750,9 @@ static int rebuild_lun_table(ctlr_info_t *h, struct gendisk *del_disk)
 	 * additional times.
 	 */
 	return -1;
-      mem_msg:
+mem_msg:
 	printk(KERN_ERR "cciss: out of memory\n");
+	h->busy_configuring = 0;
 	goto freeret;
 }
 
@@ -1654,15 +1808,15 @@ static int deregister_disk(struct gendisk *disk, drive_info_struct *drv,
 		 * other than disk 0 we will call put_disk.  We do not
 		 * do this for disk 0 as we need it to be able to
 		 * configure the controller.
-		*/
+		 */
 		if (clear_all){
 			/* This isn't pretty, but we need to find the
 			 * disk in our array and NULL our the pointer.
 			 * This is so that we will call alloc_disk if
 			 * this index is used again later.
-			*/
+			 */
 			for (i=0; i < CISS_MAX_LUN; i++){
-				if(h->gendisk[i] == disk){
+				if (h->gendisk[i] == disk) {
 					h->gendisk[i] = NULL;
 					break;
 				}
@@ -1690,7 +1844,7 @@ static int deregister_disk(struct gendisk *disk, drive_info_struct *drv,
 		if (drv == h->drv + h->highest_lun) {
 			/* if so, find the new hightest lun */
 			int i, newhighest = -1;
-			for (i = 0; i < h->highest_lun; i++) {
+			for (i = 0; i <= h->highest_lun; i++) {
 				/* if the disk has size > 0, it is available */
 				if (h->drv[i].heads)
 					newhighest = i;
@@ -3201,136 +3355,9 @@ err_out_free_res:
 	return err;
 }
 
-/*
- * Gets information about the local volumes attached to the controller.
+/* Function to find the first free pointer into our hba[] array
+ * Returns -1 if no free entries are left.
  */
-static void cciss_getgeometry(int cntl_num)
-{
-	ReportLunData_struct *ld_buff;
-	InquiryData_struct *inq_buff;
-	int return_code;
-	int i;
-	int listlength = 0;
-	__u32 lunid = 0;
-	unsigned block_size;
-	sector_t total_size;
-
-	ld_buff = kzalloc(sizeof(ReportLunData_struct), GFP_KERNEL);
-	if (ld_buff == NULL) {
-		printk(KERN_ERR "cciss: out of memory\n");
-		return;
-	}
-	inq_buff = kmalloc(sizeof(InquiryData_struct), GFP_KERNEL);
-	if (inq_buff == NULL) {
-		printk(KERN_ERR "cciss: out of memory\n");
-		kfree(ld_buff);
-		return;
-	}
-	/* Get the firmware version */
-	return_code = sendcmd(CISS_INQUIRY, cntl_num, inq_buff,
-			      sizeof(InquiryData_struct), 0, 0, 0, NULL,
-			      TYPE_CMD);
-	if (return_code == IO_OK) {
-		hba[cntl_num]->firm_ver[0] = inq_buff->data_byte[32];
-		hba[cntl_num]->firm_ver[1] = inq_buff->data_byte[33];
-		hba[cntl_num]->firm_ver[2] = inq_buff->data_byte[34];
-		hba[cntl_num]->firm_ver[3] = inq_buff->data_byte[35];
-	} else {		/* send command failed */
-
-		printk(KERN_WARNING "cciss: unable to determine firmware"
-		       " version of controller\n");
-	}
-	/* Get the number of logical volumes */
-	return_code = sendcmd(CISS_REPORT_LOG, cntl_num, ld_buff,
-			      sizeof(ReportLunData_struct), 0, 0, 0, NULL,
-			      TYPE_CMD);
-
-	if (return_code == IO_OK) {
-#ifdef CCISS_DEBUG
-		printk("LUN Data\n--------------------------\n");
-#endif				/* CCISS_DEBUG */
-
-		listlength |=
-		    (0xff & (unsigned int)(ld_buff->LUNListLength[0])) << 24;
-		listlength |=
-		    (0xff & (unsigned int)(ld_buff->LUNListLength[1])) << 16;
-		listlength |=
-		    (0xff & (unsigned int)(ld_buff->LUNListLength[2])) << 8;
-		listlength |= 0xff & (unsigned int)(ld_buff->LUNListLength[3]);
-	} else {		/* reading number of logical volumes failed */
-
-		printk(KERN_WARNING "cciss: report logical volume"
-		       " command failed\n");
-		listlength = 0;
-	}
-	hba[cntl_num]->num_luns = listlength / 8;	// 8 bytes pre entry
-	if (hba[cntl_num]->num_luns > CISS_MAX_LUN) {
-		printk(KERN_ERR
-		       "ciss:  only %d number of logical volumes supported\n",
-		       CISS_MAX_LUN);
-		hba[cntl_num]->num_luns = CISS_MAX_LUN;
-	}
-#ifdef CCISS_DEBUG
-	printk(KERN_DEBUG "Length = %x %x %x %x = %d\n",
-	       ld_buff->LUNListLength[0], ld_buff->LUNListLength[1],
-	       ld_buff->LUNListLength[2], ld_buff->LUNListLength[3],
-	       hba[cntl_num]->num_luns);
-#endif				/* CCISS_DEBUG */
-
-	hba[cntl_num]->highest_lun = hba[cntl_num]->num_luns - 1;
-	for (i = 0; i < CISS_MAX_LUN; i++) {
-		if (i < hba[cntl_num]->num_luns) {
-			lunid = (0xff & (unsigned int)(ld_buff->LUN[i][3]))
-			    << 24;
-			lunid |= (0xff & (unsigned int)(ld_buff->LUN[i][2]))
-			    << 16;
-			lunid |= (0xff & (unsigned int)(ld_buff->LUN[i][1]))
-			    << 8;
-			lunid |= 0xff & (unsigned int)(ld_buff->LUN[i][0]);
-
-			hba[cntl_num]->drv[i].LunID = lunid;
-
-#ifdef CCISS_DEBUG
-			printk(KERN_DEBUG "LUN[%d]:  %x %x %x %x = %x\n", i,
-			       ld_buff->LUN[i][0], ld_buff->LUN[i][1],
-			       ld_buff->LUN[i][2], ld_buff->LUN[i][3],
-			       hba[cntl_num]->drv[i].LunID);
-#endif				/* CCISS_DEBUG */
-
-		/* testing to see if 16-byte CDBs are already being used */
-		if(hba[cntl_num]->cciss_read == CCISS_READ_16) {
-			cciss_read_capacity_16(cntl_num, i, 0,
-					    &total_size, &block_size);
-			goto geo_inq;
-		}
-		cciss_read_capacity(cntl_num, i, 0, &total_size, &block_size);
-
-		/* If read_capacity returns all F's the logical is >2TB */
-		/* so we switch to 16-byte CDBs for all read/write ops */
-		if(total_size == 0xFFFFFFFFULL) {
-			cciss_read_capacity_16(cntl_num, i, 0,
-			&total_size, &block_size);
-			hba[cntl_num]->cciss_read = CCISS_READ_16;
-			hba[cntl_num]->cciss_write = CCISS_WRITE_16;
-		} else {
-			hba[cntl_num]->cciss_read = CCISS_READ_10;
-			hba[cntl_num]->cciss_write = CCISS_WRITE_10;
-		}
-geo_inq:
-			cciss_geometry_inquiry(cntl_num, i, 0, total_size,
-					       block_size, inq_buff,
-					       &hba[cntl_num]->drv[i]);
-		} else {
-			/* initialize raid_level to indicate a free space */
-			hba[cntl_num]->drv[i].raid_level = -1;
-		}
-	}
-	kfree(ld_buff);
-	kfree(inq_buff);
-}
-
-/* Function to find the first free pointer into our hba[] array */
-/* Returns -1 if no free entries are left.  */
 static int alloc_cciss_hba(void)
 {
 	int i;
@@ -3342,11 +3369,6 @@ static int alloc_cciss_hba(void)
 			p = kzalloc(sizeof(ctlr_info_t), GFP_KERNEL);
 			if (!p)
 				goto Enomem;
-			p->gendisk[0] = alloc_disk(1 << NWD_SHIFT);
-			if (!p->gendisk[0]) {
-				kfree(p);
-				goto Enomem;
-			}
 			hba[i] = p;
 			return i;
 		}
@@ -3474,11 +3496,13 @@ static int __devinit cciss_init_one(struct pci_dev *pdev,
 	       ((hba[i]->nr_cmds + BITS_PER_LONG -
 		 1) / BITS_PER_LONG) * sizeof(unsigned long));
 
-#ifdef CCISS_DEBUG
-	printk(KERN_DEBUG "Scanning for drives on controller cciss%d\n", i);
-#endif				/* CCISS_DEBUG */
-
-	cciss_getgeometry(i);
+	hba[i]->num_luns = 0;
+	hba[i]->highest_lun = -1;
+	for (j = 0; j < CISS_MAX_LUN; j++) {
+		hba[i]->drv[j].raid_level = -1;
+		hba[i]->drv[j].queue = NULL;
+		hba[i]->gendisk[j] = NULL;
+	}
 
 	cciss_scsi_setup(i);
 
@@ -3491,76 +3515,10 @@ static int __devinit cciss_init_one(struct pci_dev *pdev,
 
 	hba[i]->busy_initializing = 0;
 
-	do {
-		drive_info_struct *drv = &(hba[i]->drv[j]);
-		struct gendisk *disk = hba[i]->gendisk[j];
-		struct request_queue *q;
-
-		/* Check if the disk was allocated already */
-		if (!disk){
-			hba[i]->gendisk[j] = alloc_disk(1 << NWD_SHIFT);
-			disk = hba[i]->gendisk[j];
-		}
-
-		/* Check that the disk was able to be allocated */
-		if (!disk) {
-			printk(KERN_ERR "cciss: unable to allocate memory for disk %d\n", j);
-			goto clean4;
-		}
-
-		q = blk_init_queue(do_cciss_request, &hba[i]->lock);
-		if (!q) {
-			printk(KERN_ERR
-			       "cciss:  unable to allocate queue for disk %d\n",
-			       j);
-			goto clean4;
-		}
-		drv->queue = q;
-
-		blk_queue_bounce_limit(q, hba[i]->pdev->dma_mask);
-
-		/* This is a hardware imposed limit. */
-		blk_queue_max_hw_segments(q, MAXSGENTRIES);
-
-		/* This is a limit in the driver and could be eliminated. */
-		blk_queue_max_phys_segments(q, MAXSGENTRIES);
-
-		blk_queue_max_sectors(q, hba[i]->cciss_max_sectors);
-
-		blk_queue_softirq_done(q, cciss_softirq_done);
-
-		q->queuedata = hba[i];
-		sprintf(disk->disk_name, "cciss/c%dd%d", i, j);
-		disk->major = hba[i]->major;
-		disk->first_minor = j << NWD_SHIFT;
-		disk->fops = &cciss_fops;
-		disk->queue = q;
-		disk->private_data = drv;
-		disk->driverfs_dev = &pdev->dev;
-		/* we must register the controller even if no disks exist */
-		/* this is for the online array utilities */
-		if (!drv->heads && j)
-			continue;
-		blk_queue_hardsect_size(q, drv->block_size);
-		set_capacity(disk, drv->nr_blocks);
-		j++;
-	} while (j <= hba[i]->highest_lun);
-
-	/* Make sure all queue data is written out before */
-	/* interrupt handler, triggered by add_disk,  */
-	/* is allowed to start them. */
-	wmb();
-
-	for (j = 0; j <= hba[i]->highest_lun; j++)
-		add_disk(hba[i]->gendisk[j]);
-
-	/* we must register the controller even if no disks exist */
-	if (hba[i]->highest_lun == -1)
-		add_disk(hba[i]->gendisk[0]);
-
+	rebuild_lun_table(hba[i], 1);
 	return 1;
 
-      clean4:
+clean4:
 #ifdef CONFIG_CISS_SCSI_TAPE
 	kfree(hba[i]->scsi_rejects.complete);
 #endif
@@ -3575,9 +3533,9 @@ static int __devinit cciss_init_one(struct pci_dev *pdev,
 				    hba[i]->errinfo_pool,
 				    hba[i]->errinfo_pool_dhandle);
 	free_irq(hba[i]->intr[SIMPLE_MODE_INT], hba[i]);
-      clean2:
+clean2:
 	unregister_blkdev(hba[i]->major, hba[i]->devname);
-      clean1:
+clean1:
 	hba[i]->busy_initializing = 0;
 	/* cleanup any queues that may have been initialized */
 	for (j=0; j <= hba[i]->highest_lun; j++){
@@ -3656,7 +3614,9 @@ static void __devexit cciss_remove_one(struct pci_dev *pdev)
 		}
 	}
 
+#ifdef CONFIG_CISS_SCSI_TAPE
 	cciss_unregister_scsi(i);	/* unhook from SCSI subsystem */
+#endif
 
 	cciss_shutdown(pdev);
 
diff --git a/drivers/block/cciss.h b/drivers/block/cciss.h
index b70988dd33ec..24a7efa993ab 100644
--- a/drivers/block/cciss.h
+++ b/drivers/block/cciss.h
@@ -39,6 +39,8 @@ typedef struct _drive_info_struct
 				   *to prevent it from being opened or it's queue
 				   *from being started.
 				  */
+	__u8 serial_no[16]; /* from inquiry page 0x83, */
+			    /* not necc. null terminated. */
 } drive_info_struct;
 
 #ifdef CONFIG_CISS_SCSI_TAPE
diff --git a/drivers/block/cciss_scsi.c b/drivers/block/cciss_scsi.c
index e4bf9a11ca0d..e1233aabda77 100644
--- a/drivers/block/cciss_scsi.c
+++ b/drivers/block/cciss_scsi.c
@@ -358,23 +358,68 @@ find_bus_target_lun(int ctlr, int *bus, int *target, int *lun)
 	}
 	return (!found);	
 }
+struct scsi2map {
+	char scsi3addr[8];
+	int bus, target, lun;
+};
 
 static int 
 cciss_scsi_add_entry(int ctlr, int hostno, 
-		unsigned char *scsi3addr, int devtype)
+		unsigned char *scsi3addr, int devtype,
+		struct scsi2map *added, int *nadded)
 {
 	/* assumes hba[ctlr]->scsi_ctlr->lock is held */ 
 	int n = ccissscsi[ctlr].ndevices;
 	struct cciss_scsi_dev_t *sd;
+	int i, bus, target, lun;
+	unsigned char addr1[8], addr2[8];
 
 	if (n >= CCISS_MAX_SCSI_DEVS_PER_HBA) {
 		printk("cciss%d: Too many devices, "
 			"some will be inaccessible.\n", ctlr);
 		return -1;
 	}
+
+	bus = target = -1;
+	lun = 0;
+	/* Is this device a non-zero lun of a multi-lun device */
+	/* byte 4 of the 8-byte LUN addr will contain the logical unit no. */
+	if (scsi3addr[4] != 0) {
+		/* Search through our list and find the device which */
+		/* has the same 8 byte LUN address, excepting byte 4. */
+		/* Assign the same bus and target for this new LUN. */
+		/* Use the logical unit number from the firmware. */
+		memcpy(addr1, scsi3addr, 8);
+		addr1[4] = 0;
+		for (i = 0; i < n; i++) {
+			sd = &ccissscsi[ctlr].dev[i];
+			memcpy(addr2, sd->scsi3addr, 8);
+			addr2[4] = 0;
+			/* differ only in byte 4? */
+			if (memcmp(addr1, addr2, 8) == 0) {
+				bus = sd->bus;
+				target = sd->target;
+				lun = scsi3addr[4];
+				break;
+			}
+		}
+	}
+
 	sd = &ccissscsi[ctlr].dev[n];
-	if (find_bus_target_lun(ctlr, &sd->bus, &sd->target, &sd->lun) != 0)
-		return -1;
+	if (lun == 0) {
+		if (find_bus_target_lun(ctlr,
+			&sd->bus, &sd->target, &sd->lun) != 0)
+			return -1;
+	} else {
+		sd->bus = bus;
+		sd->target = target;
+		sd->lun = lun;
+	}
+	added[*nadded].bus = sd->bus;
+	added[*nadded].target = sd->target;
+	added[*nadded].lun = sd->lun;
+	(*nadded)++;
+
 	memcpy(&sd->scsi3addr[0], scsi3addr, 8);
 	sd->devtype = devtype;
 	ccissscsi[ctlr].ndevices++;
@@ -390,7 +435,8 @@ cciss_scsi_add_entry(int ctlr, int hostno,
 }
 
 static void
-cciss_scsi_remove_entry(int ctlr, int hostno, int entry)
+cciss_scsi_remove_entry(int ctlr, int hostno, int entry,
+	struct scsi2map *removed, int *nremoved)
 {
 	/* assumes hba[ctlr]->scsi_ctlr->lock is held */ 
 	int i;
@@ -398,6 +444,10 @@ cciss_scsi_remove_entry(int ctlr, int hostno, int entry)
 
 	if (entry < 0 || entry >= CCISS_MAX_SCSI_DEVS_PER_HBA) return;
 	sd = ccissscsi[ctlr].dev[entry];
+	removed[*nremoved].bus    = sd.bus;
+	removed[*nremoved].target = sd.target;
+	removed[*nremoved].lun    = sd.lun;
+	(*nremoved)++;
 	for (i=entry;i<ccissscsi[ctlr].ndevices-1;i++)
 		ccissscsi[ctlr].dev[i] = ccissscsi[ctlr].dev[i+1];
 	ccissscsi[ctlr].ndevices--;
@@ -417,6 +467,26 @@ cciss_scsi_remove_entry(int ctlr, int hostno, int entry)
 	(a)[1] == (b)[1] && \
 	(a)[0] == (b)[0])
 
+static void fixup_botched_add(int ctlr, char *scsi3addr)
+{
+	/* called when scsi_add_device fails in order to re-adjust */
+	/* ccissscsi[] to match the mid layer's view. */
+	unsigned long flags;
+	int i, j;
+	CPQ_TAPE_LOCK(ctlr, flags);
+	for (i = 0; i < ccissscsi[ctlr].ndevices; i++) {
+		if (memcmp(scsi3addr,
+				ccissscsi[ctlr].dev[i].scsi3addr, 8) == 0) {
+			for (j = i; j < ccissscsi[ctlr].ndevices-1; j++)
+				ccissscsi[ctlr].dev[j] =
+					ccissscsi[ctlr].dev[j+1];
+			ccissscsi[ctlr].ndevices--;
+			break;
+		}
+	}
+	CPQ_TAPE_UNLOCK(ctlr, flags);
+}
+
 static int
 adjust_cciss_scsi_table(int ctlr, int hostno,
 	struct cciss_scsi_dev_t sd[], int nsds)
@@ -429,13 +499,33 @@ adjust_cciss_scsi_table(int ctlr, int hostno,
 	int i,j, found, changes=0;
 	struct cciss_scsi_dev_t *csd;
 	unsigned long flags;
+	struct scsi2map *added, *removed;
+	int nadded, nremoved;
+	struct Scsi_Host *sh = NULL;
+
+	added = kzalloc(sizeof(*added) * CCISS_MAX_SCSI_DEVS_PER_HBA,
+			GFP_KERNEL);
+	removed = kzalloc(sizeof(*removed) * CCISS_MAX_SCSI_DEVS_PER_HBA,
+			GFP_KERNEL);
+
+	if (!added || !removed) {
+		printk(KERN_WARNING "cciss%d: Out of memory in "
+			"adjust_cciss_scsi_table\n", ctlr);
+		goto free_and_out;
+	}
 
 	CPQ_TAPE_LOCK(ctlr, flags);
 
+	if (hostno != -1)  /* if it's not the first time... */
+		sh = ((struct cciss_scsi_adapter_data_t *)
+			hba[ctlr]->scsi_ctlr)->scsi_host;
+
 	/* find any devices in ccissscsi[] that are not in 
 	   sd[] and remove them from ccissscsi[] */
 
 	i = 0;
+	nremoved = 0;
+	nadded = 0;
 	while(i<ccissscsi[ctlr].ndevices) {
 		csd = &ccissscsi[ctlr].dev[i];
 		found=0;
@@ -455,8 +545,9 @@ adjust_cciss_scsi_table(int ctlr, int hostno,
 			/* printk("cciss%d: %s device c%db%dt%dl%d removed.\n",
 				ctlr, scsi_device_type(csd->devtype), hostno,
 					csd->bus, csd->target, csd->lun); */
-			cciss_scsi_remove_entry(ctlr, hostno, i);
-			/* note, i not incremented */
+			cciss_scsi_remove_entry(ctlr, hostno, i,
+				removed, &nremoved);
+			/* remove ^^^, hence i not incremented */
 		} 
 		else if (found == 1) { /* device is different kind */
 			changes++;
@@ -464,8 +555,15 @@ adjust_cciss_scsi_table(int ctlr, int hostno,
 				"(device type now %s).\n",
 				ctlr, hostno, csd->bus, csd->target, csd->lun,
 					scsi_device_type(csd->devtype));
+			cciss_scsi_remove_entry(ctlr, hostno, i,
+				removed, &nremoved);
+			/* remove ^^^, hence i not incremented */
+			if (cciss_scsi_add_entry(ctlr, hostno,
+				&sd[j].scsi3addr[0], sd[j].devtype,
+				added, &nadded) != 0)
+				/* we just removed one, so add can't fail. */
+					BUG();
 			csd->devtype = sd[j].devtype;
-			i++;	/* so just move along. */
 		} else 		/* device is same as it ever was, */
 			i++;	/* so just move along. */
 	}
@@ -489,7 +587,9 @@ adjust_cciss_scsi_table(int ctlr, int hostno,
 		if (!found) {
 			changes++;
 			if (cciss_scsi_add_entry(ctlr, hostno, 
-				&sd[i].scsi3addr[0], sd[i].devtype) != 0)
+
+				&sd[i].scsi3addr[0], sd[i].devtype,
+				added, &nadded) != 0)
 				break;
 		} else if (found == 1) {
 			/* should never happen... */
@@ -501,9 +601,50 @@ adjust_cciss_scsi_table(int ctlr, int hostno,
 	}
 	CPQ_TAPE_UNLOCK(ctlr, flags);
 
-	if (!changes) 
-		printk("cciss%d: No device changes detected.\n", ctlr);
+	/* Don't notify scsi mid layer of any changes the first time through */
+	/* (or if there are no changes) scsi_scan_host will do it later the */
+	/* first time through. */
+	if (hostno == -1 || !changes)
+		goto free_and_out;
+
+	/* Notify scsi mid layer of any removed devices */
+	for (i = 0; i < nremoved; i++) {
+		struct scsi_device *sdev =
+			scsi_device_lookup(sh, removed[i].bus,
+				removed[i].target, removed[i].lun);
+		if (sdev != NULL) {
+			scsi_remove_device(sdev);
+			scsi_device_put(sdev);
+		} else {
+			/* We don't expect to get here. */
+			/* future cmds to this device will get selection */
+			/* timeout as if the device was gone. */
+			printk(KERN_WARNING "cciss%d: didn't find "
+				"c%db%dt%dl%d\n for removal.",
+				ctlr, hostno, removed[i].bus,
+				removed[i].target, removed[i].lun);
+		}
+	}
+
+	/* Notify scsi mid layer of any added devices */
+	for (i = 0; i < nadded; i++) {
+		int rc;
+		rc = scsi_add_device(sh, added[i].bus,
+			added[i].target, added[i].lun);
+		if (rc == 0)
+			continue;
+		printk(KERN_WARNING "cciss%d: scsi_add_device "
+			"c%db%dt%dl%d failed, device not added.\n",
+			ctlr, hostno,
+			added[i].bus, added[i].target, added[i].lun);
+		/* now we have to remove it from ccissscsi, */
+		/* since it didn't get added to scsi mid layer */
+		fixup_botched_add(ctlr, added[i].scsi3addr);
+	}
 
+free_and_out:
+	kfree(added);
+	kfree(removed);
 	return 0;
 }
 
@@ -1355,32 +1496,6 @@ cciss_unregister_scsi(int ctlr)
 }
 
 static int 
-cciss_register_scsi(int ctlr)
-{
-	unsigned long flags;
-
-	CPQ_TAPE_LOCK(ctlr, flags);
-
-	/* Since this is really a block driver, the SCSI core may not be 
-	   initialized at init time, in which case, calling scsi_register_host
-	   would hang.  Instead, we do it later, via /proc filesystem
-	   and rc scripts, when we know SCSI core is good to go. */
-
-	/* Only register if SCSI devices are detected. */
-	if (ccissscsi[ctlr].ndevices != 0) {
-		((struct cciss_scsi_adapter_data_t *) 
-			hba[ctlr]->scsi_ctlr)->registered = 1;
-		CPQ_TAPE_UNLOCK(ctlr, flags);
-		return cciss_scsi_detect(ctlr);
-	}
-	CPQ_TAPE_UNLOCK(ctlr, flags);
-	printk(KERN_INFO 
-		"cciss%d: No appropriate SCSI device detected, "
-		"SCSI subsystem not engaged.\n", ctlr);
-	return 0;
-}
-
-static int 
 cciss_engage_scsi(int ctlr)
 {
 	struct cciss_scsi_adapter_data_t *sa;
@@ -1391,15 +1506,15 @@ cciss_engage_scsi(int ctlr)
 	sa = (struct cciss_scsi_adapter_data_t *) hba[ctlr]->scsi_ctlr;
 	stk = &sa->cmd_stack; 
 
-	if (((struct cciss_scsi_adapter_data_t *) 
-		hba[ctlr]->scsi_ctlr)->registered) {
+	if (sa->registered) {
 		printk("cciss%d: SCSI subsystem already engaged.\n", ctlr);
 		spin_unlock_irqrestore(CCISS_LOCK(ctlr), flags);
 		return ENXIO;
 	}
+	sa->registered = 1;
 	spin_unlock_irqrestore(CCISS_LOCK(ctlr), flags);
 	cciss_update_non_disk_devices(ctlr, -1);
-	cciss_register_scsi(ctlr);
+	cciss_scsi_detect(ctlr);
 	return 0;
 }
 
@@ -1493,7 +1608,5 @@ static int  cciss_eh_abort_handler(struct scsi_cmnd *scsicmd)
 /* If no tape support, then these become defined out of existence */
 
 #define cciss_scsi_setup(cntl_num)
-#define cciss_unregister_scsi(ctlr)
-#define cciss_register_scsi(ctlr)
 
 #endif /* CONFIG_CISS_SCSI_TAPE */
diff --git a/drivers/block/nbd.c b/drivers/block/nbd.c
index ad98dda6037d..1778e4a2c672 100644
--- a/drivers/block/nbd.c
+++ b/drivers/block/nbd.c
@@ -707,15 +707,15 @@ static int __init nbd_init(void)
 
 	BUILD_BUG_ON(sizeof(struct nbd_request) != 28);
 
-	nbd_dev = kcalloc(nbds_max, sizeof(*nbd_dev), GFP_KERNEL);
-	if (!nbd_dev)
-		return -ENOMEM;
-
 	if (max_part < 0) {
 		printk(KERN_CRIT "nbd: max_part must be >= 0\n");
 		return -EINVAL;
 	}
 
+	nbd_dev = kcalloc(nbds_max, sizeof(*nbd_dev), GFP_KERNEL);
+	if (!nbd_dev)
+		return -ENOMEM;
+
 	part_shift = 0;
 	if (max_part > 0)
 		part_shift = fls(max_part);
@@ -779,6 +779,7 @@ out:
 		blk_cleanup_queue(nbd_dev[i].disk->queue);
 		put_disk(nbd_dev[i].disk);
 	}
+	kfree(nbd_dev);
 	return err;
 }
 
@@ -795,6 +796,7 @@ static void __exit nbd_cleanup(void)
 		}
 	}
 	unregister_blkdev(NBD_MAJOR, "nbd");
+	kfree(nbd_dev);
 	printk(KERN_INFO "nbd: unregistered device at major %d\n", NBD_MAJOR);
 }
 
diff --git a/drivers/block/pktcdvd.c b/drivers/block/pktcdvd.c
index 158eed4d5161..29b7a648cc6e 100644
--- a/drivers/block/pktcdvd.c
+++ b/drivers/block/pktcdvd.c
@@ -49,7 +49,6 @@
 #include <linux/types.h>
 #include <linux/kernel.h>
 #include <linux/kthread.h>
-#include <linux/smp_lock.h>
 #include <linux/errno.h>
 #include <linux/spinlock.h>
 #include <linux/file.h>
@@ -2798,14 +2797,9 @@ out_mem:
 	return ret;
 }
 
-static long pkt_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
+static int pkt_ioctl(struct inode *inode, struct file *file, unsigned int cmd, unsigned long arg)
 {
-	struct inode *inode = file->f_path.dentry->d_inode;
-	struct pktcdvd_device *pd;
-	long ret;
-
-	lock_kernel();
-	pd = inode->i_bdev->bd_disk->private_data;
+	struct pktcdvd_device *pd = inode->i_bdev->bd_disk->private_data;
 
 	VPRINTK("pkt_ioctl: cmd %x, dev %d:%d\n", cmd, imajor(inode), iminor(inode));
 
@@ -2818,8 +2812,7 @@ static long pkt_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
 	case CDROM_LAST_WRITTEN:
 	case CDROM_SEND_PACKET:
 	case SCSI_IOCTL_SEND_COMMAND:
-		ret = blkdev_ioctl(pd->bdev->bd_inode, file, cmd, arg);
-		break;
+		return blkdev_ioctl(pd->bdev->bd_inode, file, cmd, arg);
 
 	case CDROMEJECT:
 		/*
@@ -2828,15 +2821,14 @@ static long pkt_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
 		 */
 		if (pd->refcnt == 1)
 			pkt_lock_door(pd, 0);
-		ret = blkdev_ioctl(pd->bdev->bd_inode, file, cmd, arg);
-		break;
+		return blkdev_ioctl(pd->bdev->bd_inode, file, cmd, arg);
 
 	default:
 		VPRINTK(DRIVER_NAME": Unknown ioctl for %s (%x)\n", pd->name, cmd);
-		ret = -ENOTTY;
+		return -ENOTTY;
 	}
-	unlock_kernel();
-	return ret;
+
+	return 0;
 }
 
 static int pkt_media_changed(struct gendisk *disk)
@@ -2858,7 +2850,7 @@ static struct block_device_operations pktcdvd_ops = {
 	.owner =		THIS_MODULE,
 	.open =			pkt_open,
 	.release =		pkt_close,
-	.unlocked_ioctl =	pkt_ioctl,
+	.ioctl =		pkt_ioctl,
 	.media_changed =	pkt_media_changed,
 };
 
@@ -3023,8 +3015,7 @@ static void pkt_get_status(struct pkt_ctrl_command *ctrl_cmd)
 	mutex_unlock(&ctl_mutex);
 }
 
-static long pkt_ctl_ioctl(struct file *file, unsigned int cmd,
-						unsigned long arg)
+static int pkt_ctl_ioctl(struct inode *inode, struct file *file, unsigned int cmd, unsigned long arg)
 {
 	void __user *argp = (void __user *)arg;
 	struct pkt_ctrl_command ctrl_cmd;
@@ -3041,22 +3032,16 @@ static long pkt_ctl_ioctl(struct file *file, unsigned int cmd,
 	case PKT_CTRL_CMD_SETUP:
 		if (!capable(CAP_SYS_ADMIN))
 			return -EPERM;
-		lock_kernel();
 		ret = pkt_setup_dev(new_decode_dev(ctrl_cmd.dev), &pkt_dev);
 		ctrl_cmd.pkt_dev = new_encode_dev(pkt_dev);
-		unlock_kernel();
 		break;
 	case PKT_CTRL_CMD_TEARDOWN:
 		if (!capable(CAP_SYS_ADMIN))
 			return -EPERM;
-		lock_kernel();
 		ret = pkt_remove_dev(new_decode_dev(ctrl_cmd.pkt_dev));
-		unlock_kernel();
 		break;
 	case PKT_CTRL_CMD_STATUS:
-		lock_kernel();
 		pkt_get_status(&ctrl_cmd);
-		unlock_kernel();
 		break;
 	default:
 		return -ENOTTY;
@@ -3069,7 +3054,7 @@ static long pkt_ctl_ioctl(struct file *file, unsigned int cmd,
 
 
 static const struct file_operations pkt_ctl_fops = {
-	.unlocked_ioctl	 = pkt_ctl_ioctl,
+	.ioctl	 = pkt_ctl_ioctl,
 	.owner	 = THIS_MODULE,
 };
 
diff --git a/drivers/block/virtio_blk.c b/drivers/block/virtio_blk.c
index dd7ea203f940..42251095134f 100644
--- a/drivers/block/virtio_blk.c
+++ b/drivers/block/virtio_blk.c
@@ -196,6 +196,7 @@ static int virtblk_probe(struct virtio_device *vdev)
 	int err;
 	u64 cap;
 	u32 v;
+	u32 blk_size;
 
 	if (index_to_minor(index) >= 1 << MINORBITS)
 		return -ENOSPC;
@@ -290,6 +291,13 @@ static int virtblk_probe(struct virtio_device *vdev)
 	if (!err)
 		blk_queue_max_hw_segments(vblk->disk->queue, v);
 
+	/* Host can optionally specify the block size of the device */
+	err = virtio_config_val(vdev, VIRTIO_BLK_F_BLK_SIZE,
+				offsetof(struct virtio_blk_config, blk_size),
+				&blk_size);
+	if (!err)
+		blk_queue_hardsect_size(vblk->disk->queue, blk_size);
+
 	add_disk(vblk->disk);
 	return 0;
 
@@ -330,7 +338,7 @@ static struct virtio_device_id id_table[] = {
 
 static unsigned int features[] = {
 	VIRTIO_BLK_F_BARRIER, VIRTIO_BLK_F_SEG_MAX, VIRTIO_BLK_F_SIZE_MAX,
-	VIRTIO_BLK_F_GEOMETRY, VIRTIO_BLK_F_RO,
+	VIRTIO_BLK_F_GEOMETRY, VIRTIO_BLK_F_RO, VIRTIO_BLK_F_BLK_SIZE,
 };
 
 static struct virtio_driver virtio_blk = {
diff --git a/drivers/block/xen-blkfront.c b/drivers/block/xen-blkfront.c
index 9ae05c584234..3ca643cafccd 100644
--- a/drivers/block/xen-blkfront.c
+++ b/drivers/block/xen-blkfront.c
@@ -154,8 +154,8 @@ static int blkif_getgeo(struct block_device *bd, struct hd_geometry *hg)
 	return 0;
 }
 
-int blkif_ioctl(struct inode *inode, struct file *filep,
-		unsigned command, unsigned long argument)
+static int blkif_ioctl(struct inode *inode, struct file *filep,
+		       unsigned command, unsigned long argument)
 {
 	struct blkfront_info *info =
 		inode->i_bdev->bd_disk->private_data;
diff --git a/drivers/bluetooth/Kconfig b/drivers/bluetooth/Kconfig
index a235ca787465..7cb4029a5375 100644
--- a/drivers/bluetooth/Kconfig
+++ b/drivers/bluetooth/Kconfig
@@ -3,8 +3,8 @@ menu "Bluetooth device drivers"
 	depends on BT
 
 config BT_HCIUSB
-	tristate "HCI USB driver"
-	depends on USB
+	tristate "HCI USB driver (old version)"
+	depends on USB && BT_HCIBTUSB=n
 	help
 	  Bluetooth HCI USB driver.
 	  This driver is required if you want to use Bluetooth devices with
@@ -23,15 +23,13 @@ config BT_HCIUSB_SCO
 	  Say Y here to compile support for SCO over HCI USB.
 
 config BT_HCIBTUSB
-	tristate "HCI USB driver (alternate version)"
-	depends on USB && EXPERIMENTAL && BT_HCIUSB=n
+	tristate "HCI USB driver"
+	depends on USB
 	help
 	  Bluetooth HCI USB driver.
 	  This driver is required if you want to use Bluetooth devices with
 	  USB interface.
 
-          This driver is still experimental and has no SCO support.
-
 	  Say Y here to compile support for Bluetooth USB devices into the
 	  kernel or say M to compile it as module (btusb).
 
diff --git a/drivers/bluetooth/bcm203x.c b/drivers/bluetooth/bcm203x.c
index 8919ccf8274b..ee40201c7278 100644
--- a/drivers/bluetooth/bcm203x.c
+++ b/drivers/bluetooth/bcm203x.c
@@ -42,9 +42,7 @@
 #define BT_DBG(D...)
 #endif
 
-#define VERSION "1.1"
-
-static int ignore = 0;
+#define VERSION "1.2"
 
 static struct usb_device_id bcm203x_table[] = {
 	/* Broadcom Blutonium (BCM2033) */
@@ -175,7 +173,7 @@ static int bcm203x_probe(struct usb_interface *intf, const struct usb_device_id
 
 	BT_DBG("intf %p id %p", intf, id);
 
-	if (ignore || (intf->cur_altsetting->desc.bInterfaceNumber != 0))
+	if (intf->cur_altsetting->desc.bInterfaceNumber != 0)
 		return -ENODEV;
 
 	data = kzalloc(sizeof(*data), GFP_KERNEL);
@@ -300,9 +298,6 @@ static void __exit bcm203x_exit(void)
 module_init(bcm203x_init);
 module_exit(bcm203x_exit);
 
-module_param(ignore, bool, 0644);
-MODULE_PARM_DESC(ignore, "Ignore devices from the matching table");
-
 MODULE_AUTHOR("Marcel Holtmann <marcel@holtmann.org>");
 MODULE_DESCRIPTION("Broadcom Blutonium firmware driver ver " VERSION);
 MODULE_VERSION(VERSION);
diff --git a/drivers/bluetooth/bfusb.c b/drivers/bluetooth/bfusb.c
index 0c211adbc063..90a094634630 100644
--- a/drivers/bluetooth/bfusb.c
+++ b/drivers/bluetooth/bfusb.c
@@ -43,9 +43,7 @@
 #define BT_DBG(D...)
 #endif
 
-#define VERSION "1.1"
-
-static int ignore = 0;
+#define VERSION "1.2"
 
 static struct usb_driver bfusb_driver;
 
@@ -656,9 +654,6 @@ static int bfusb_probe(struct usb_interface *intf, const struct usb_device_id *i
 
 	BT_DBG("intf %p id %p", intf, id);
 
-	if (ignore)
-		return -ENODEV;
-
 	/* Check number of endpoints */
 	if (intf->cur_altsetting->desc.bNumEndpoints < 2)
 		return -EIO;
@@ -795,9 +790,6 @@ static void __exit bfusb_exit(void)
 module_init(bfusb_init);
 module_exit(bfusb_exit);
 
-module_param(ignore, bool, 0644);
-MODULE_PARM_DESC(ignore, "Ignore devices from the matching table");
-
 MODULE_AUTHOR("Marcel Holtmann <marcel@holtmann.org>");
 MODULE_DESCRIPTION("BlueFRITZ! USB driver ver " VERSION);
 MODULE_VERSION(VERSION);
diff --git a/drivers/bluetooth/bpa10x.c b/drivers/bluetooth/bpa10x.c
index 3b28658f5a1f..1e55a658e6ce 100644
--- a/drivers/bluetooth/bpa10x.c
+++ b/drivers/bluetooth/bpa10x.c
@@ -40,9 +40,7 @@
 #define BT_DBG(D...)
 #endif
 
-#define VERSION "0.9"
-
-static int ignore = 0;
+#define VERSION "0.10"
 
 static struct usb_device_id bpa10x_table[] = {
 	/* Tektronix BPA 100/105 (Digianswer) */
@@ -460,9 +458,6 @@ static int bpa10x_probe(struct usb_interface *intf, const struct usb_device_id *
 
 	BT_DBG("intf %p id %p", intf, id);
 
-	if (ignore)
-		return -ENODEV;
-
 	if (intf->cur_altsetting->desc.bInterfaceNumber != 0)
 		return -ENODEV;
 
@@ -546,9 +541,6 @@ static void __exit bpa10x_exit(void)
 module_init(bpa10x_init);
 module_exit(bpa10x_exit);
 
-module_param(ignore, bool, 0644);
-MODULE_PARM_DESC(ignore, "Ignore devices from the matching table");
-
 MODULE_AUTHOR("Marcel Holtmann <marcel@holtmann.org>");
 MODULE_DESCRIPTION("Digianswer Bluetooth USB driver ver " VERSION);
 MODULE_VERSION(VERSION);
diff --git a/drivers/bluetooth/bt3c_cs.c b/drivers/bluetooth/bt3c_cs.c
index 593b7c595038..27058477cc8b 100644
--- a/drivers/bluetooth/bt3c_cs.c
+++ b/drivers/bluetooth/bt3c_cs.c
@@ -60,7 +60,7 @@
 /* ======================== Module parameters ======================== */
 
 
-MODULE_AUTHOR("Marcel Holtmann <marcel@holtmann.org>, Jose Orlando Pereira <jop@di.uminho.pt>");
+MODULE_AUTHOR("Marcel Holtmann <marcel@holtmann.org>");
 MODULE_DESCRIPTION("Bluetooth driver for the 3Com Bluetooth PCMCIA card");
 MODULE_LICENSE("GPL");
 MODULE_FIRMWARE("BT3CPCC.bin");
diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
index 12e108914f19..6a010681ecf3 100644
--- a/drivers/bluetooth/btusb.c
+++ b/drivers/bluetooth/btusb.c
@@ -2,7 +2,7 @@
  *
  *  Generic Bluetooth USB driver
  *
- *  Copyright (C) 2005-2007  Marcel Holtmann <marcel@holtmann.org>
+ *  Copyright (C) 2005-2008  Marcel Holtmann <marcel@holtmann.org>
  *
  *
  *  This program is free software; you can redistribute it and/or modify
@@ -41,27 +41,135 @@
 #define BT_DBG(D...)
 #endif
 
-#define VERSION "0.1"
+#define VERSION "0.3"
+
+static int ignore_dga;
+static int ignore_csr;
+static int ignore_sniffer;
+static int disable_scofix;
+static int force_scofix;
+static int reset;
+
+static struct usb_driver btusb_driver;
+
+#define BTUSB_IGNORE		0x01
+#define BTUSB_RESET		0x02
+#define BTUSB_DIGIANSWER	0x04
+#define BTUSB_CSR		0x08
+#define BTUSB_SNIFFER		0x10
+#define BTUSB_BCM92035		0x20
+#define BTUSB_BROKEN_ISOC	0x40
+#define BTUSB_WRONG_SCO_MTU	0x80
 
 static struct usb_device_id btusb_table[] = {
 	/* Generic Bluetooth USB device */
 	{ USB_DEVICE_INFO(0xe0, 0x01, 0x01) },
 
+	/* AVM BlueFRITZ! USB v2.0 */
+	{ USB_DEVICE(0x057c, 0x3800) },
+
+	/* Bluetooth Ultraport Module from IBM */
+	{ USB_DEVICE(0x04bf, 0x030a) },
+
+	/* ALPS Modules with non-standard id */
+	{ USB_DEVICE(0x044e, 0x3001) },
+	{ USB_DEVICE(0x044e, 0x3002) },
+
+	/* Ericsson with non-standard id */
+	{ USB_DEVICE(0x0bdb, 0x1002) },
+
+	/* Canyon CN-BTU1 with HID interfaces */
+	{ USB_DEVICE(0x0c10, 0x0000), .driver_info = BTUSB_RESET },
+
 	{ }	/* Terminating entry */
 };
 
 MODULE_DEVICE_TABLE(usb, btusb_table);
 
 static struct usb_device_id blacklist_table[] = {
+	/* CSR BlueCore devices */
+	{ USB_DEVICE(0x0a12, 0x0001), .driver_info = BTUSB_CSR },
+
+	/* Broadcom BCM2033 without firmware */
+	{ USB_DEVICE(0x0a5c, 0x2033), .driver_info = BTUSB_IGNORE },
+
+	/* Broadcom BCM2035 */
+	{ USB_DEVICE(0x0a5c, 0x2035), .driver_info = BTUSB_RESET | BTUSB_WRONG_SCO_MTU },
+	{ USB_DEVICE(0x0a5c, 0x200a), .driver_info = BTUSB_RESET | BTUSB_WRONG_SCO_MTU },
+
+	/* Broadcom BCM2045 */
+	{ USB_DEVICE(0x0a5c, 0x2039), .driver_info = BTUSB_RESET | BTUSB_WRONG_SCO_MTU },
+	{ USB_DEVICE(0x0a5c, 0x2101), .driver_info = BTUSB_RESET | BTUSB_WRONG_SCO_MTU },
+
+	/* Broadcom BCM2046 */
+	{ USB_DEVICE(0x0a5c, 0x2151), .driver_info = BTUSB_RESET },
+
+	/* IBM/Lenovo ThinkPad with Broadcom chip */
+	{ USB_DEVICE(0x0a5c, 0x201e), .driver_info = BTUSB_RESET | BTUSB_WRONG_SCO_MTU },
+	{ USB_DEVICE(0x0a5c, 0x2110), .driver_info = BTUSB_RESET | BTUSB_WRONG_SCO_MTU },
+
+	/* Targus ACB10US */
+	{ USB_DEVICE(0x0a5c, 0x2100), .driver_info = BTUSB_RESET },
+
+	/* ANYCOM Bluetooth USB-200 and USB-250 */
+	{ USB_DEVICE(0x0a5c, 0x2111), .driver_info = BTUSB_RESET },
+
+	/* HP laptop with Broadcom chip */
+	{ USB_DEVICE(0x03f0, 0x171d), .driver_info = BTUSB_RESET | BTUSB_WRONG_SCO_MTU },
+
+	/* Dell laptop with Broadcom chip */
+	{ USB_DEVICE(0x413c, 0x8126), .driver_info = BTUSB_RESET | BTUSB_WRONG_SCO_MTU },
+
+	/* Dell Wireless 370 */
+	{ USB_DEVICE(0x413c, 0x8156), .driver_info = BTUSB_RESET | BTUSB_WRONG_SCO_MTU },
+
+	/* Dell Wireless 410 */
+	{ USB_DEVICE(0x413c, 0x8152), .driver_info = BTUSB_RESET | BTUSB_WRONG_SCO_MTU },
+
+	/* Microsoft Wireless Transceiver for Bluetooth 2.0 */
+	{ USB_DEVICE(0x045e, 0x009c), .driver_info = BTUSB_RESET },
+
+	/* Kensington Bluetooth USB adapter */
+	{ USB_DEVICE(0x047d, 0x105d), .driver_info = BTUSB_RESET },
+	{ USB_DEVICE(0x047d, 0x105e), .driver_info = BTUSB_RESET | BTUSB_WRONG_SCO_MTU },
+
+	/* ISSC Bluetooth Adapter v3.1 */
+	{ USB_DEVICE(0x1131, 0x1001), .driver_info = BTUSB_RESET },
+
+	/* RTX Telecom based adapters with buggy SCO support */
+	{ USB_DEVICE(0x0400, 0x0807), .driver_info = BTUSB_BROKEN_ISOC },
+	{ USB_DEVICE(0x0400, 0x080a), .driver_info = BTUSB_BROKEN_ISOC },
+
+	/* CONWISE Technology based adapters with buggy SCO support */
+	{ USB_DEVICE(0x0e5e, 0x6622), .driver_info = BTUSB_BROKEN_ISOC },
+
+	/* Belkin F8T012 and F8T013 devices */
+	{ USB_DEVICE(0x050d, 0x0012), .driver_info = BTUSB_RESET | BTUSB_WRONG_SCO_MTU },
+	{ USB_DEVICE(0x050d, 0x0013), .driver_info = BTUSB_RESET | BTUSB_WRONG_SCO_MTU },
+
+	/* Digianswer devices */
+	{ USB_DEVICE(0x08fd, 0x0001), .driver_info = BTUSB_DIGIANSWER },
+	{ USB_DEVICE(0x08fd, 0x0002), .driver_info = BTUSB_IGNORE },
+
+	/* CSR BlueCore Bluetooth Sniffer */
+	{ USB_DEVICE(0x0a12, 0x0002), .driver_info = BTUSB_SNIFFER },
+
+	/* Frontline ComProbe Bluetooth Sniffer */
+	{ USB_DEVICE(0x16d3, 0x0002), .driver_info = BTUSB_SNIFFER },
+
 	{ }	/* Terminating entry */
 };
 
+#define BTUSB_MAX_ISOC_FRAMES	10
+
 #define BTUSB_INTR_RUNNING	0
 #define BTUSB_BULK_RUNNING	1
+#define BTUSB_ISOC_RUNNING	2
 
 struct btusb_data {
 	struct hci_dev       *hdev;
 	struct usb_device    *udev;
+	struct usb_interface *isoc;
 
 	spinlock_t lock;
 
@@ -72,10 +180,15 @@ struct btusb_data {
 	struct usb_anchor tx_anchor;
 	struct usb_anchor intr_anchor;
 	struct usb_anchor bulk_anchor;
+	struct usb_anchor isoc_anchor;
 
 	struct usb_endpoint_descriptor *intr_ep;
 	struct usb_endpoint_descriptor *bulk_tx_ep;
 	struct usb_endpoint_descriptor *bulk_rx_ep;
+	struct usb_endpoint_descriptor *isoc_tx_ep;
+	struct usb_endpoint_descriptor *isoc_rx_ep;
+
+	int isoc_altsetting;
 };
 
 static void btusb_intr_complete(struct urb *urb)
@@ -91,6 +204,8 @@ static void btusb_intr_complete(struct urb *urb)
 		return;
 
 	if (urb->status == 0) {
+		hdev->stat.byte_rx += urb->actual_length;
+
 		if (hci_recv_fragment(hdev, HCI_EVENT_PKT,
 						urb->transfer_buffer,
 						urb->actual_length) < 0) {
@@ -112,7 +227,7 @@ static void btusb_intr_complete(struct urb *urb)
 	}
 }
 
-static inline int btusb_submit_intr_urb(struct hci_dev *hdev)
+static int btusb_submit_intr_urb(struct hci_dev *hdev)
 {
 	struct btusb_data *data = hdev->driver_data;
 	struct urb *urb;
@@ -122,6 +237,9 @@ static inline int btusb_submit_intr_urb(struct hci_dev *hdev)
 
 	BT_DBG("%s", hdev->name);
 
+	if (!data->intr_ep)
+		return -ENODEV;
+
 	urb = usb_alloc_urb(0, GFP_ATOMIC);
 	if (!urb)
 		return -ENOMEM;
@@ -170,6 +288,8 @@ static void btusb_bulk_complete(struct urb *urb)
 		return;
 
 	if (urb->status == 0) {
+		hdev->stat.byte_rx += urb->actual_length;
+
 		if (hci_recv_fragment(hdev, HCI_ACLDATA_PKT,
 						urb->transfer_buffer,
 						urb->actual_length) < 0) {
@@ -191,7 +311,7 @@ static void btusb_bulk_complete(struct urb *urb)
 	}
 }
 
-static inline int btusb_submit_bulk_urb(struct hci_dev *hdev)
+static int btusb_submit_bulk_urb(struct hci_dev *hdev)
 {
 	struct btusb_data *data = hdev->driver_data;
 	struct urb *urb;
@@ -201,6 +321,9 @@ static inline int btusb_submit_bulk_urb(struct hci_dev *hdev)
 
 	BT_DBG("%s", hdev->name);
 
+	if (!data->bulk_rx_ep)
+		return -ENODEV;
+
 	urb = usb_alloc_urb(0, GFP_KERNEL);
 	if (!urb)
 		return -ENOMEM;
@@ -235,6 +358,127 @@ static inline int btusb_submit_bulk_urb(struct hci_dev *hdev)
 	return err;
 }
 
+static void btusb_isoc_complete(struct urb *urb)
+{
+	struct hci_dev *hdev = urb->context;
+	struct btusb_data *data = hdev->driver_data;
+	int i, err;
+
+	BT_DBG("%s urb %p status %d count %d", hdev->name,
+					urb, urb->status, urb->actual_length);
+
+	if (!test_bit(HCI_RUNNING, &hdev->flags))
+		return;
+
+	if (urb->status == 0) {
+		for (i = 0; i < urb->number_of_packets; i++) {
+			unsigned int offset = urb->iso_frame_desc[i].offset;
+			unsigned int length = urb->iso_frame_desc[i].actual_length;
+
+			if (urb->iso_frame_desc[i].status)
+				continue;
+
+			hdev->stat.byte_rx += length;
+
+			if (hci_recv_fragment(hdev, HCI_SCODATA_PKT,
+						urb->transfer_buffer + offset,
+								length) < 0) {
+				BT_ERR("%s corrupted SCO packet", hdev->name);
+				hdev->stat.err_rx++;
+			}
+		}
+	}
+
+	if (!test_bit(BTUSB_ISOC_RUNNING, &data->flags))
+		return;
+
+	usb_anchor_urb(urb, &data->isoc_anchor);
+
+	err = usb_submit_urb(urb, GFP_ATOMIC);
+	if (err < 0) {
+		BT_ERR("%s urb %p failed to resubmit (%d)",
+						hdev->name, urb, -err);
+		usb_unanchor_urb(urb);
+	}
+}
+
+static void inline __fill_isoc_descriptor(struct urb *urb, int len, int mtu)
+{
+	int i, offset = 0;
+
+	BT_DBG("len %d mtu %d", len, mtu);
+
+	for (i = 0; i < BTUSB_MAX_ISOC_FRAMES && len >= mtu;
+					i++, offset += mtu, len -= mtu) {
+		urb->iso_frame_desc[i].offset = offset;
+		urb->iso_frame_desc[i].length = mtu;
+	}
+
+	if (len && i < BTUSB_MAX_ISOC_FRAMES) {
+		urb->iso_frame_desc[i].offset = offset;
+		urb->iso_frame_desc[i].length = len;
+		i++;
+	}
+
+	urb->number_of_packets = i;
+}
+
+static int btusb_submit_isoc_urb(struct hci_dev *hdev)
+{
+	struct btusb_data *data = hdev->driver_data;
+	struct urb *urb;
+	unsigned char *buf;
+	unsigned int pipe;
+	int err, size;
+
+	BT_DBG("%s", hdev->name);
+
+	if (!data->isoc_rx_ep)
+		return -ENODEV;
+
+	urb = usb_alloc_urb(BTUSB_MAX_ISOC_FRAMES, GFP_KERNEL);
+	if (!urb)
+		return -ENOMEM;
+
+	size = le16_to_cpu(data->isoc_rx_ep->wMaxPacketSize) *
+						BTUSB_MAX_ISOC_FRAMES;
+
+	buf = kmalloc(size, GFP_KERNEL);
+	if (!buf) {
+		usb_free_urb(urb);
+		return -ENOMEM;
+	}
+
+	pipe = usb_rcvisocpipe(data->udev, data->isoc_rx_ep->bEndpointAddress);
+
+	urb->dev      = data->udev;
+	urb->pipe     = pipe;
+	urb->context  = hdev;
+	urb->complete = btusb_isoc_complete;
+	urb->interval = data->isoc_rx_ep->bInterval;
+
+	urb->transfer_flags  = URB_FREE_BUFFER | URB_ISO_ASAP;
+	urb->transfer_buffer = buf;
+	urb->transfer_buffer_length = size;
+
+	__fill_isoc_descriptor(urb, size,
+			le16_to_cpu(data->isoc_rx_ep->wMaxPacketSize));
+
+	usb_anchor_urb(urb, &data->isoc_anchor);
+
+	err = usb_submit_urb(urb, GFP_KERNEL);
+	if (err < 0) {
+		BT_ERR("%s urb %p submission failed (%d)",
+						hdev->name, urb, -err);
+		usb_unanchor_urb(urb);
+		kfree(buf);
+	}
+
+	usb_free_urb(urb);
+
+	return err;
+}
+
 static void btusb_tx_complete(struct urb *urb)
 {
 	struct sk_buff *skb = urb->context;
@@ -288,6 +532,9 @@ static int btusb_close(struct hci_dev *hdev)
 	if (!test_and_clear_bit(HCI_RUNNING, &hdev->flags))
 		return 0;
 
+	clear_bit(BTUSB_ISOC_RUNNING, &data->flags);
+	usb_kill_anchored_urbs(&data->intr_anchor);
+
 	clear_bit(BTUSB_BULK_RUNNING, &data->flags);
 	usb_kill_anchored_urbs(&data->bulk_anchor);
 
@@ -349,6 +596,9 @@ static int btusb_send_frame(struct sk_buff *skb)
 		break;
 
 	case HCI_ACLDATA_PKT:
+		if (!data->bulk_tx_ep || hdev->conn_hash.acl_num < 1)
+			return -ENODEV;
+
 		urb = usb_alloc_urb(0, GFP_ATOMIC);
 		if (!urb)
 			return -ENOMEM;
@@ -363,9 +613,31 @@ static int btusb_send_frame(struct sk_buff *skb)
 		break;
 
 	case HCI_SCODATA_PKT:
+		if (!data->isoc_tx_ep || hdev->conn_hash.sco_num < 1)
+			return -ENODEV;
+
+		urb = usb_alloc_urb(BTUSB_MAX_ISOC_FRAMES, GFP_ATOMIC);
+		if (!urb)
+			return -ENOMEM;
+
+		pipe = usb_sndisocpipe(data->udev,
+					data->isoc_tx_ep->bEndpointAddress);
+
+		urb->dev      = data->udev;
+		urb->pipe     = pipe;
+		urb->context  = skb;
+		urb->complete = btusb_tx_complete;
+		urb->interval = data->isoc_tx_ep->bInterval;
+
+		urb->transfer_flags  = URB_ISO_ASAP;
+		urb->transfer_buffer = skb->data;
+		urb->transfer_buffer_length = skb->len;
+
+		__fill_isoc_descriptor(urb, skb->len,
+				le16_to_cpu(data->isoc_tx_ep->wMaxPacketSize));
+
 		hdev->stat.sco_tx++;
-		kfree_skb(skb);
-		return 0;
+		break;
 
 	default:
 		return -EILSEQ;
@@ -404,22 +676,86 @@ static void btusb_notify(struct hci_dev *hdev, unsigned int evt)
 		schedule_work(&data->work);
 }
 
+static int inline __set_isoc_interface(struct hci_dev *hdev, int altsetting)
+{
+	struct btusb_data *data = hdev->driver_data;
+	struct usb_interface *intf = data->isoc;
+	struct usb_endpoint_descriptor *ep_desc;
+	int i, err;
+
+	if (!data->isoc)
+		return -ENODEV;
+
+	err = usb_set_interface(data->udev, 1, altsetting);
+	if (err < 0) {
+		BT_ERR("%s setting interface failed (%d)", hdev->name, -err);
+		return err;
+	}
+
+	data->isoc_altsetting = altsetting;
+
+	data->isoc_tx_ep = NULL;
+	data->isoc_rx_ep = NULL;
+
+	for (i = 0; i < intf->cur_altsetting->desc.bNumEndpoints; i++) {
+		ep_desc = &intf->cur_altsetting->endpoint[i].desc;
+
+		if (!data->isoc_tx_ep && usb_endpoint_is_isoc_out(ep_desc)) {
+			data->isoc_tx_ep = ep_desc;
+			continue;
+		}
+
+		if (!data->isoc_rx_ep && usb_endpoint_is_isoc_in(ep_desc)) {
+			data->isoc_rx_ep = ep_desc;
+			continue;
+		}
+	}
+
+	if (!data->isoc_tx_ep || !data->isoc_rx_ep) {
+		BT_ERR("%s invalid SCO descriptors", hdev->name);
+		return -ENODEV;
+	}
+
+	return 0;
+}
+
 static void btusb_work(struct work_struct *work)
 {
 	struct btusb_data *data = container_of(work, struct btusb_data, work);
 	struct hci_dev *hdev = data->hdev;
 
-	if (hdev->conn_hash.acl_num == 0) {
+	if (hdev->conn_hash.acl_num > 0) {
+		if (!test_and_set_bit(BTUSB_BULK_RUNNING, &data->flags)) {
+			if (btusb_submit_bulk_urb(hdev) < 0)
+				clear_bit(BTUSB_BULK_RUNNING, &data->flags);
+			else
+				btusb_submit_bulk_urb(hdev);
+		}
+	} else {
 		clear_bit(BTUSB_BULK_RUNNING, &data->flags);
 		usb_kill_anchored_urbs(&data->bulk_anchor);
-		return;
 	}
 
-	if (!test_and_set_bit(BTUSB_BULK_RUNNING, &data->flags)) {
-		if (btusb_submit_bulk_urb(hdev) < 0)
-			clear_bit(BTUSB_BULK_RUNNING, &data->flags);
-		else
-			btusb_submit_bulk_urb(hdev);
+	if (hdev->conn_hash.sco_num > 0) {
+		if (data->isoc_altsetting != 2) {
+			clear_bit(BTUSB_ISOC_RUNNING, &data->flags);
+			usb_kill_anchored_urbs(&data->isoc_anchor);
+
+			if (__set_isoc_interface(hdev, 2) < 0)
+				return;
+		}
+
+		if (!test_and_set_bit(BTUSB_ISOC_RUNNING, &data->flags)) {
+			if (btusb_submit_isoc_urb(hdev) < 0)
+				clear_bit(BTUSB_ISOC_RUNNING, &data->flags);
+			else
+				btusb_submit_isoc_urb(hdev);
+		}
+	} else {
+		clear_bit(BTUSB_ISOC_RUNNING, &data->flags);
+		usb_kill_anchored_urbs(&data->isoc_anchor);
+
+		__set_isoc_interface(hdev, 0);
 	}
 }
 
@@ -433,6 +769,7 @@ static int btusb_probe(struct usb_interface *intf,
 
 	BT_DBG("intf %p id %p", intf, id);
 
+	/* interface numbers are hardcoded in the spec */
 	if (intf->cur_altsetting->desc.bInterfaceNumber != 0)
 		return -ENODEV;
 
@@ -443,6 +780,18 @@ static int btusb_probe(struct usb_interface *intf,
 			id = match;
 	}
 
+	if (id->driver_info == BTUSB_IGNORE)
+		return -ENODEV;
+
+	if (ignore_dga && id->driver_info & BTUSB_DIGIANSWER)
+		return -ENODEV;
+
+	if (ignore_csr && id->driver_info & BTUSB_CSR)
+		return -ENODEV;
+
+	if (ignore_sniffer && id->driver_info & BTUSB_SNIFFER)
+		return -ENODEV;
+
 	data = kzalloc(sizeof(*data), GFP_KERNEL);
 	if (!data)
 		return -ENOMEM;
@@ -480,6 +829,7 @@ static int btusb_probe(struct usb_interface *intf,
 	init_usb_anchor(&data->tx_anchor);
 	init_usb_anchor(&data->intr_anchor);
 	init_usb_anchor(&data->bulk_anchor);
+	init_usb_anchor(&data->isoc_anchor);
 
 	hdev = hci_alloc_dev();
 	if (!hdev) {
@@ -503,7 +853,49 @@ static int btusb_probe(struct usb_interface *intf,
 
 	hdev->owner = THIS_MODULE;
 
-	set_bit(HCI_QUIRK_RESET_ON_INIT, &hdev->quirks);
+	/* interface numbers are hardcoded in the spec */
+	data->isoc = usb_ifnum_to_if(data->udev, 1);
+
+	if (reset || id->driver_info & BTUSB_RESET)
+		set_bit(HCI_QUIRK_RESET_ON_INIT, &hdev->quirks);
+
+	if (force_scofix || id->driver_info & BTUSB_WRONG_SCO_MTU) {
+		if (!disable_scofix)
+			set_bit(HCI_QUIRK_FIXUP_BUFFER_SIZE, &hdev->quirks);
+	}
+
+	if (id->driver_info & BTUSB_BROKEN_ISOC)
+		data->isoc = NULL;
+
+	if (id->driver_info & BTUSB_SNIFFER) {
+		struct usb_device *udev = data->udev;
+
+		if (le16_to_cpu(udev->descriptor.bcdDevice) > 0x997)
+			set_bit(HCI_QUIRK_RAW_DEVICE, &hdev->quirks);
+
+		data->isoc = NULL;
+	}
+
+	if (id->driver_info & BTUSB_BCM92035) {
+		unsigned char cmd[] = { 0x3b, 0xfc, 0x01, 0x00 };
+		struct sk_buff *skb;
+
+		skb = bt_skb_alloc(sizeof(cmd), GFP_KERNEL);
+		if (skb) {
+			memcpy(skb_put(skb, sizeof(cmd)), cmd, sizeof(cmd));
+			skb_queue_tail(&hdev->driver_init, skb);
+		}
+	}
+
+	if (data->isoc) {
+		err = usb_driver_claim_interface(&btusb_driver,
+							data->isoc, NULL);
+		if (err < 0) {
+			hci_free_dev(hdev);
+			kfree(data);
+			return err;
+		}
+	}
 
 	err = hci_register_dev(hdev);
 	if (err < 0) {
@@ -529,6 +921,9 @@ static void btusb_disconnect(struct usb_interface *intf)
 
 	hdev = data->hdev;
 
+	if (data->isoc)
+		usb_driver_release_interface(&btusb_driver, data->isoc);
+
 	usb_set_intfdata(intf, NULL);
 
 	hci_unregister_dev(hdev);
@@ -558,6 +953,24 @@ static void __exit btusb_exit(void)
 module_init(btusb_init);
 module_exit(btusb_exit);
 
+module_param(ignore_dga, bool, 0644);
+MODULE_PARM_DESC(ignore_dga, "Ignore devices with id 08fd:0001");
+
+module_param(ignore_csr, bool, 0644);
+MODULE_PARM_DESC(ignore_csr, "Ignore devices with id 0a12:0001");
+
+module_param(ignore_sniffer, bool, 0644);
+MODULE_PARM_DESC(ignore_sniffer, "Ignore devices with id 0a12:0002");
+
+module_param(disable_scofix, bool, 0644);
+MODULE_PARM_DESC(disable_scofix, "Disable fixup of wrong SCO buffer size");
+
+module_param(force_scofix, bool, 0644);
+MODULE_PARM_DESC(force_scofix, "Force fixup of wrong SCO buffers size");
+
+module_param(reset, bool, 0644);
+MODULE_PARM_DESC(reset, "Send HCI reset command on initialization");
+
 MODULE_AUTHOR("Marcel Holtmann <marcel@holtmann.org>");
 MODULE_DESCRIPTION("Generic Bluetooth USB driver ver " VERSION);
 MODULE_VERSION(VERSION);
diff --git a/drivers/bluetooth/hci_ldisc.c b/drivers/bluetooth/hci_ldisc.c
index 69df187d74ce..8dfcf77cb717 100644
--- a/drivers/bluetooth/hci_ldisc.c
+++ b/drivers/bluetooth/hci_ldisc.c
@@ -577,7 +577,7 @@ module_exit(hci_uart_exit);
 module_param(reset, bool, 0644);
 MODULE_PARM_DESC(reset, "Send HCI reset command on initialization");
 
-MODULE_AUTHOR("Maxim Krasnyansky <maxk@qualcomm.com>, Marcel Holtmann <marcel@holtmann.org>");
+MODULE_AUTHOR("Marcel Holtmann <marcel@holtmann.org>");
 MODULE_DESCRIPTION("Bluetooth HCI UART driver ver " VERSION);
 MODULE_VERSION(VERSION);
 MODULE_LICENSE("GPL");
diff --git a/drivers/bluetooth/hci_usb.c b/drivers/bluetooth/hci_usb.c
index 192522ebb771..3c453924f838 100644
--- a/drivers/bluetooth/hci_usb.c
+++ b/drivers/bluetooth/hci_usb.c
@@ -62,7 +62,6 @@
 #define URB_ZERO_PACKET 0
 #endif
 
-static int ignore;
 static int ignore_dga;
 static int ignore_csr;
 static int ignore_sniffer;
@@ -74,7 +73,7 @@ static int reset;
 static int isoc = 2;
 #endif
 
-#define VERSION "2.9"
+#define VERSION "2.10"
 
 static struct usb_driver hci_usb_driver; 
 
@@ -134,6 +133,13 @@ static struct usb_device_id blacklist_ids[] = {
 
 	/* Dell laptop with Broadcom chip */
 	{ USB_DEVICE(0x413c, 0x8126), .driver_info = HCI_RESET | HCI_WRONG_SCO_MTU },
+	/* Dell Wireless 370 */
+	{ USB_DEVICE(0x413c, 0x8156), .driver_info = HCI_RESET | HCI_WRONG_SCO_MTU },
+	/* Dell Wireless 410 */
+	{ USB_DEVICE(0x413c, 0x8152), .driver_info = HCI_RESET | HCI_WRONG_SCO_MTU },
+
+	/* Broadcom 2046 */
+	{ USB_DEVICE(0x0a5c, 0x2151), .driver_info = HCI_RESET },
 
 	/* Microsoft Wireless Transceiver for Bluetooth 2.0 */
 	{ USB_DEVICE(0x045e, 0x009c), .driver_info = HCI_RESET },
@@ -794,7 +800,7 @@ static int hci_usb_probe(struct usb_interface *intf, const struct usb_device_id
 			id = match;
 	}
 
-	if (ignore || id->driver_info & HCI_IGNORE)
+	if (id->driver_info & HCI_IGNORE)
 		return -ENODEV;
 
 	if (ignore_dga && id->driver_info & HCI_DIGIANSWER)
@@ -1101,9 +1107,6 @@ static void __exit hci_usb_exit(void)
 module_init(hci_usb_init);
 module_exit(hci_usb_exit);
 
-module_param(ignore, bool, 0644);
-MODULE_PARM_DESC(ignore, "Ignore devices from the matching table");
-
 module_param(ignore_dga, bool, 0644);
 MODULE_PARM_DESC(ignore_dga, "Ignore devices with id 08fd:0001");
 
@@ -1127,7 +1130,7 @@ module_param(isoc, int, 0644);
 MODULE_PARM_DESC(isoc, "Set isochronous transfers for SCO over HCI support");
 #endif
 
-MODULE_AUTHOR("Maxim Krasnyansky <maxk@qualcomm.com>, Marcel Holtmann <marcel@holtmann.org>");
+MODULE_AUTHOR("Marcel Holtmann <marcel@holtmann.org>");
 MODULE_DESCRIPTION("Bluetooth HCI USB driver ver " VERSION);
 MODULE_VERSION(VERSION);
 MODULE_LICENSE("GPL");
diff --git a/drivers/bluetooth/hci_vhci.c b/drivers/bluetooth/hci_vhci.c
index d97700aa54a9..7320a71b6368 100644
--- a/drivers/bluetooth/hci_vhci.c
+++ b/drivers/bluetooth/hci_vhci.c
@@ -377,7 +377,7 @@ module_exit(vhci_exit);
 module_param(minor, int, 0444);
 MODULE_PARM_DESC(minor, "Miscellaneous minor device number");
 
-MODULE_AUTHOR("Maxim Krasnyansky <maxk@qualcomm.com>, Marcel Holtmann <marcel@holtmann.org>");
+MODULE_AUTHOR("Marcel Holtmann <marcel@holtmann.org>");
 MODULE_DESCRIPTION("Bluetooth virtual HCI driver ver " VERSION);
 MODULE_VERSION(VERSION);
 MODULE_LICENSE("GPL");
diff --git a/drivers/cdrom/cdrom.c b/drivers/cdrom/cdrom.c
index a5da35632651..74031de517e6 100644
--- a/drivers/cdrom/cdrom.c
+++ b/drivers/cdrom/cdrom.c
@@ -408,7 +408,6 @@ int register_cdrom(struct cdrom_device_info *cdi)
 	ENSURE(get_last_session, CDC_MULTI_SESSION);
 	ENSURE(get_mcn, CDC_MCN);
 	ENSURE(reset, CDC_RESET);
-	ENSURE(audio_ioctl, CDC_PLAY_AUDIO);
 	ENSURE(generic_packet, CDC_GENERIC_PACKET);
 	cdi->mc_flags = 0;
 	cdo->n_minors = 0;
@@ -1436,10 +1435,6 @@ static void cdrom_count_tracks(struct cdrom_device_info *cdi, tracktype* tracks)
 	tracks->xa=0;
 	tracks->error=0;
 	cdinfo(CD_COUNT_TRACKS, "entering cdrom_count_tracks\n"); 
-        if (!CDROM_CAN(CDC_PLAY_AUDIO)) { 
-                tracks->error=CDS_NO_INFO;
-                return;
-        }        
 	/* Grab the TOC header so we can see how many tracks there are */
 	if ((ret = cdi->ops->audio_ioctl(cdi, CDROMREADTOCHDR, &header))) {
 		if (ret == -ENOMEDIUM)
@@ -2510,8 +2505,6 @@ static int cdrom_ioctl_get_subchnl(struct cdrom_device_info *cdi,
 
 	/* cdinfo(CD_DO_IOCTL,"entering CDROMSUBCHNL\n");*/
 
-	if (!CDROM_CAN(CDC_PLAY_AUDIO))
-		return -ENOSYS;
 	if (copy_from_user(&q, argp, sizeof(q)))
 		return -EFAULT;
 
@@ -2542,8 +2535,6 @@ static int cdrom_ioctl_read_tochdr(struct cdrom_device_info *cdi,
 
 	/* cdinfo(CD_DO_IOCTL, "entering CDROMREADTOCHDR\n"); */
 
-	if (!CDROM_CAN(CDC_PLAY_AUDIO))
-		return -ENOSYS;
 	if (copy_from_user(&header, argp, sizeof(header)))
 		return -EFAULT;
 
@@ -2566,8 +2557,6 @@ static int cdrom_ioctl_read_tocentry(struct cdrom_device_info *cdi,
 
 	/* cdinfo(CD_DO_IOCTL, "entering CDROMREADTOCENTRY\n"); */
 
-	if (!CDROM_CAN(CDC_PLAY_AUDIO))
-		return -ENOSYS;
 	if (copy_from_user(&entry, argp, sizeof(entry)))
 		return -EFAULT;
 
diff --git a/drivers/cdrom/gdrom.c b/drivers/cdrom/gdrom.c
index 71ec426ecffc..1231d95aa695 100644
--- a/drivers/cdrom/gdrom.c
+++ b/drivers/cdrom/gdrom.c
@@ -39,8 +39,8 @@
 #include <asm/io.h>
 #include <asm/dma.h>
 #include <asm/delay.h>
-#include <asm/mach/dma.h>
-#include <asm/mach/sysasic.h>
+#include <mach/dma.h>
+#include <mach/sysasic.h>
 
 #define GDROM_DEV_NAME "gdrom"
 #define GD_SESSION_OFFSET 150
@@ -471,6 +471,12 @@ cleanup_sense_final:
 	return err;
 }
 
+static int gdrom_audio_ioctl(struct cdrom_device_info *cdi, unsigned int cmd,
+			     void *arg)
+{
+	return -EINVAL;
+}
+
 static struct cdrom_device_ops gdrom_ops = {
 	.open			= gdrom_open,
 	.release		= gdrom_release,
@@ -478,6 +484,7 @@ static struct cdrom_device_ops gdrom_ops = {
 	.media_changed		= gdrom_mediachanged,
 	.get_last_session	= gdrom_get_last_session,
 	.reset			= gdrom_hardreset,
+	.audio_ioctl		= gdrom_audio_ioctl,
 	.capability		= CDC_MULTI_SESSION | CDC_MEDIA_CHANGED |
 				  CDC_RESET | CDC_DRIVE_STATUS | CDC_CD_R,
 	.n_minors		= 1,
diff --git a/drivers/cdrom/viocd.c b/drivers/cdrom/viocd.c
index 9d0dfe6e0d63..031e0e1a1a3b 100644
--- a/drivers/cdrom/viocd.c
+++ b/drivers/cdrom/viocd.c
@@ -550,12 +550,19 @@ return_complete:
 	}
 }
 
+static int viocd_audio_ioctl(struct cdrom_device_info *cdi, unsigned int cmd,
+			     void *arg)
+{
+	return -EINVAL;
+}
+
 static struct cdrom_device_ops viocd_dops = {
 	.open = viocd_open,
 	.release = viocd_release,
 	.media_changed = viocd_media_changed,
 	.lock_door = viocd_lock_door,
 	.generic_packet = viocd_packet,
+	.audio_ioctl = viocd_audio_ioctl,
 	.capability = CDC_CLOSE_TRAY | CDC_OPEN_TRAY | CDC_LOCK | CDC_SELECT_SPEED | CDC_SELECT_DISC | CDC_MULTI_SESSION | CDC_MCN | CDC_MEDIA_CHANGED | CDC_PLAY_AUDIO | CDC_RESET | CDC_DRIVE_STATUS | CDC_GENERIC_PACKET | CDC_CD_R | CDC_CD_RW | CDC_DVD | CDC_DVD_R | CDC_DVD_RAM | CDC_RAM
 };
 
diff --git a/drivers/char/Kconfig b/drivers/char/Kconfig
index 67b07576f8bf..caff85149b9d 100644
--- a/drivers/char/Kconfig
+++ b/drivers/char/Kconfig
@@ -8,7 +8,7 @@ config VT
 	bool "Virtual terminal" if EMBEDDED
 	depends on !S390
 	select INPUT
-	default y if !VIOCONS
+	default y
 	---help---
 	  If you say Y here, you will get support for terminal devices with
 	  display and keyboard devices. These are called "virtual" because you
@@ -36,6 +36,14 @@ config VT
 	  If unsure, say Y, or else you won't be able to do much with your new
 	  shiny Linux system :-)
 
+config CONSOLE_TRANSLATIONS
+	depends on VT
+	default y
+	bool "Enable character translations in console" if EMBEDDED
+	---help---
+	  This enables support for font mapping and Unicode translation
+	  on virtual consoles.
+
 config VT_CONSOLE
 	bool "Support for console on virtual terminal" if EMBEDDED
 	depends on VT
@@ -578,11 +586,14 @@ config HVC_DRIVER
 	  It will automatically be selected if one of the back-end console drivers
 	  is selected.
 
+config HVC_IRQ
+	bool
 
 config HVC_CONSOLE
 	bool "pSeries Hypervisor Virtual Console support"
 	depends on PPC_PSERIES
 	select HVC_DRIVER
+	select HVC_IRQ
 	help
 	  pSeries machines when partitioned support a hypervisor virtual
 	  console. This driver allows each pSeries partition to have a console
@@ -593,6 +604,7 @@ config HVC_ISERIES
 	depends on PPC_ISERIES
 	default y
 	select HVC_DRIVER
+	select HVC_IRQ
 	help
 	  iSeries machines support a hypervisor virtual console.
 
@@ -614,13 +626,18 @@ config HVC_XEN
 	bool "Xen Hypervisor Console support"
 	depends on XEN
 	select HVC_DRIVER
+	select HVC_IRQ
 	default y
 	help
 	  Xen virtual console device driver
 
 config VIRTIO_CONSOLE
-	bool
+	tristate "Virtio console"
+	depends on VIRTIO
 	select HVC_DRIVER
+	help
+	  Virtio console for use with lguest and other hypervisors.
+
 
 config HVCS
 	tristate "IBM Hypervisor Virtual Console Server support"
diff --git a/drivers/char/Makefile b/drivers/char/Makefile
index 4b6e736cfa02..6850f6da7576 100644
--- a/drivers/char/Makefile
+++ b/drivers/char/Makefile
@@ -12,8 +12,8 @@ obj-y	 += mem.o random.o tty_io.o n_tty.o tty_ioctl.o tty_ldisc.o
 obj-$(CONFIG_LEGACY_PTYS)	+= pty.o
 obj-$(CONFIG_UNIX98_PTYS)	+= pty.o
 obj-y				+= misc.o
-obj-$(CONFIG_VT)		+= vt_ioctl.o vc_screen.o consolemap.o \
-				   consolemap_deftbl.o selection.o keyboard.o
+obj-$(CONFIG_VT)		+= vt_ioctl.o vc_screen.o selection.o keyboard.o
+obj-$(CONFIG_CONSOLE_TRANSLATIONS) += consolemap.o consolemap_deftbl.o
 obj-$(CONFIG_HW_CONSOLE)	+= vt.o defkeymap.o
 obj-$(CONFIG_AUDIT)		+= tty_audit.o
 obj-$(CONFIG_MAGIC_SYSRQ)	+= sysrq.o
@@ -48,13 +48,13 @@ obj-$(CONFIG_HVC_ISERIES)	+= hvc_iseries.o
 obj-$(CONFIG_HVC_RTAS)		+= hvc_rtas.o
 obj-$(CONFIG_HVC_BEAT)		+= hvc_beat.o
 obj-$(CONFIG_HVC_DRIVER)	+= hvc_console.o
+obj-$(CONFIG_HVC_IRQ)		+= hvc_irq.o
 obj-$(CONFIG_HVC_XEN)		+= hvc_xen.o
 obj-$(CONFIG_VIRTIO_CONSOLE)	+= virtio_console.o
 obj-$(CONFIG_RAW_DRIVER)	+= raw.o
 obj-$(CONFIG_SGI_SNSC)		+= snsc.o snsc_event.o
 obj-$(CONFIG_MSPEC)		+= mspec.o
 obj-$(CONFIG_MMTIMER)		+= mmtimer.o
-obj-$(CONFIG_VIOCONS)		+= viocons.o
 obj-$(CONFIG_VIOTAPE)		+= viotape.o
 obj-$(CONFIG_HVCS)		+= hvcs.o
 obj-$(CONFIG_IBM_BSR)		+= bsr.o
@@ -63,7 +63,6 @@ obj-$(CONFIG_BRIQ_PANEL)	+= briq_panel.o
 obj-$(CONFIG_BFIN_OTP)		+= bfin-otp.o
 
 obj-$(CONFIG_PRINTER)		+= lp.o
-obj-$(CONFIG_TIPAR)		+= tipar.o
 
 obj-$(CONFIG_APM_EMULATION)	+= apm-emulation.o
 
diff --git a/drivers/char/agp/agp.h b/drivers/char/agp/agp.h
index 81e14bea54bd..4bada0e8b812 100644
--- a/drivers/char/agp/agp.h
+++ b/drivers/char/agp/agp.h
@@ -148,6 +148,9 @@ struct agp_bridge_data {
 	char minor_version;
 	struct list_head list;
 	u32 apbase_config;
+	/* list of agp_memory mapped to the aperture */
+	struct list_head mapped_list;
+	spinlock_t mapped_lock;
 };
 
 #define KB(x)	((x) * 1024)
diff --git a/drivers/char/agp/ali-agp.c b/drivers/char/agp/ali-agp.c
index 1ffb381130c3..31dcd9142d54 100644
--- a/drivers/char/agp/ali-agp.c
+++ b/drivers/char/agp/ali-agp.c
@@ -110,7 +110,8 @@ static int ali_configure(void)
 
 		nlvm_addr+= agp_bridge->gart_bus_addr;
 		nlvm_addr|=(agp_bridge->gart_bus_addr>>12);
-		printk(KERN_INFO PFX "nlvm top &base = %8x\n",nlvm_addr);
+		dev_info(&agp_bridge->dev->dev, "nlvm top &base = %8x\n",
+			 nlvm_addr);
 	}
 #endif
 
@@ -315,8 +316,8 @@ static int __devinit agp_ali_probe(struct pci_dev *pdev,
 			goto found;
 	}
 
-	printk(KERN_ERR PFX "Unsupported ALi chipset (device id: %04x)\n",
-	     pdev->device);
+	dev_err(&pdev->dev, "unsupported ALi chipset [%04x/%04x])\n",
+		pdev->vendor, pdev->device);
 	return -ENODEV;
 
 
@@ -361,8 +362,7 @@ found:
 		bridge->driver = &ali_generic_bridge;
 	}
 
-	printk(KERN_INFO PFX "Detected ALi %s chipset\n",
-			devs[j].chipset_name);
+	dev_info(&pdev->dev, "ALi %s chipset\n", devs[j].chipset_name);
 
 	/* Fill in the mode register */
 	pci_read_config_dword(pdev,
diff --git a/drivers/char/agp/amd-k7-agp.c b/drivers/char/agp/amd-k7-agp.c
index 39a0718bc616..e280531843be 100644
--- a/drivers/char/agp/amd-k7-agp.c
+++ b/drivers/char/agp/amd-k7-agp.c
@@ -419,8 +419,8 @@ static int __devinit agp_amdk7_probe(struct pci_dev *pdev,
 		return -ENODEV;
 
 	j = ent - agp_amdk7_pci_table;
-	printk(KERN_INFO PFX "Detected AMD %s chipset\n",
-	       amd_agp_device_ids[j].chipset_name);
+	dev_info(&pdev->dev, "AMD %s chipset\n",
+		 amd_agp_device_ids[j].chipset_name);
 
 	bridge = agp_alloc_bridge();
 	if (!bridge)
@@ -442,7 +442,7 @@ static int __devinit agp_amdk7_probe(struct pci_dev *pdev,
 		while (!cap_ptr) {
 			gfxcard = pci_get_class(PCI_CLASS_DISPLAY_VGA<<8, gfxcard);
 			if (!gfxcard) {
-				printk (KERN_INFO PFX "Couldn't find an AGP VGA controller.\n");
+				dev_info(&pdev->dev, "no AGP VGA controller\n");
 				return -ENODEV;
 			}
 			cap_ptr = pci_find_capability(gfxcard, PCI_CAP_ID_AGP);
@@ -453,7 +453,7 @@ static int __devinit agp_amdk7_probe(struct pci_dev *pdev,
 		   (if necessary at all). */
 		if (gfxcard->vendor == PCI_VENDOR_ID_NVIDIA) {
 			agp_bridge->flags |= AGP_ERRATA_1X;
-			printk (KERN_INFO PFX "AMD 751 chipset with NVidia GeForce detected. Forcing to 1X due to errata.\n");
+			dev_info(&pdev->dev, "AMD 751 chipset with NVidia GeForce; forcing 1X due to errata\n");
 		}
 		pci_dev_put(gfxcard);
 	}
@@ -469,7 +469,7 @@ static int __devinit agp_amdk7_probe(struct pci_dev *pdev,
 			agp_bridge->flags = AGP_ERRATA_FASTWRITES;
 			agp_bridge->flags |= AGP_ERRATA_SBA;
 			agp_bridge->flags |= AGP_ERRATA_1X;
-			printk (KERN_INFO PFX "AMD 761 chipset with errata detected - disabling AGP fast writes & SBA and forcing to 1X.\n");
+			dev_info(&pdev->dev, "AMD 761 chipset with errata; disabling AGP fast writes & SBA and forcing to 1X\n");
 		}
 	}
 
diff --git a/drivers/char/agp/amd64-agp.c b/drivers/char/agp/amd64-agp.c
index 481ffe87c716..7495c522d8e4 100644
--- a/drivers/char/agp/amd64-agp.c
+++ b/drivers/char/agp/amd64-agp.c
@@ -34,6 +34,7 @@
 
 static struct resource *aperture_resource;
 static int __initdata agp_try_unsupported = 1;
+static int agp_bridges_found;
 
 static void amd64_tlbflush(struct agp_memory *temp)
 {
@@ -293,12 +294,13 @@ static __devinit int fix_northbridge(struct pci_dev *nb, struct pci_dev *agp,
 	 * so let double check that order, and lets trust the AMD NB settings
 	 */
 	if (order >=0 && aper + (32ULL<<(20 + order)) > 0x100000000ULL) {
-		printk(KERN_INFO "Aperture size %u MB is not right, using settings from NB\n",
-				  32 << order);
+		dev_info(&agp->dev, "aperture size %u MB is not right, using settings from NB\n",
+			 32 << order);
 		order = nb_order;
 	}
 
-	printk(KERN_INFO PFX "Aperture from AGP @ %Lx size %u MB\n", aper, 32 << order);
+	dev_info(&agp->dev, "aperture from AGP @ %Lx size %u MB\n",
+		 aper, 32 << order);
 	if (order < 0 || !agp_aperture_valid(aper, (32*1024*1024)<<order))
 		return -1;
 
@@ -319,10 +321,10 @@ static __devinit int cache_nbs (struct pci_dev *pdev, u32 cap_ptr)
 	for (i = 0; i < num_k8_northbridges; i++) {
 		struct pci_dev *dev = k8_northbridges[i];
 		if (fix_northbridge(dev, pdev, cap_ptr) < 0) {
-			printk(KERN_ERR PFX "No usable aperture found.\n");
+			dev_err(&dev->dev, "no usable aperture found\n");
 #ifdef __x86_64__
 			/* should port this to i386 */
-			printk(KERN_ERR PFX "Consider rebooting with iommu=memaper=2 to get a good aperture.\n");
+			dev_err(&dev->dev, "consider rebooting with iommu=memaper=2 to get a good aperture\n");
 #endif
 			return -1;
 		}
@@ -345,14 +347,14 @@ static void __devinit amd8151_init(struct pci_dev *pdev, struct agp_bridge_data
 	default:   revstring="??"; break;
 	}
 
-	printk (KERN_INFO PFX "Detected AMD 8151 AGP Bridge rev %s\n", revstring);
+	dev_info(&pdev->dev, "AMD 8151 AGP Bridge rev %s\n", revstring);
 
 	/*
 	 * Work around errata.
 	 * Chips before B2 stepping incorrectly reporting v3.5
 	 */
 	if (pdev->revision < 0x13) {
-		printk (KERN_INFO PFX "Correcting AGP revision (reports 3.5, is really 3.0)\n");
+		dev_info(&pdev->dev, "correcting AGP revision (reports 3.5, is really 3.0)\n");
 		bridge->major_version = 3;
 		bridge->minor_version = 0;
 	}
@@ -375,11 +377,11 @@ static int __devinit uli_agp_init(struct pci_dev *pdev)
 	struct pci_dev *dev1;
 	int i;
 	unsigned size = amd64_fetch_size();
-	printk(KERN_INFO "Setting up ULi AGP.\n");
+
+	dev_info(&pdev->dev, "setting up ULi AGP\n");
 	dev1 = pci_get_slot (pdev->bus,PCI_DEVFN(0,0));
 	if (dev1 == NULL) {
-		printk(KERN_INFO PFX "Detected a ULi chipset, "
-			"but could not fine the secondary device.\n");
+		dev_info(&pdev->dev, "can't find ULi secondary device\n");
 		return -ENODEV;
 	}
 
@@ -388,7 +390,7 @@ static int __devinit uli_agp_init(struct pci_dev *pdev)
 			break;
 
 	if (i == ARRAY_SIZE(uli_sizes)) {
-		printk(KERN_INFO PFX "No ULi size found for %d\n", size);
+		dev_info(&pdev->dev, "no ULi size found for %d\n", size);
 		return -ENODEV;
 	}
 
@@ -433,13 +435,11 @@ static int nforce3_agp_init(struct pci_dev *pdev)
 	int i;
 	unsigned size = amd64_fetch_size();
 
-	printk(KERN_INFO PFX "Setting up Nforce3 AGP.\n");
+	dev_info(&pdev->dev, "setting up Nforce3 AGP\n");
 
 	dev1 = pci_get_slot(pdev->bus, PCI_DEVFN(11, 0));
 	if (dev1 == NULL) {
-		printk(KERN_INFO PFX "agpgart: Detected an NVIDIA "
-			"nForce3 chipset, but could not find "
-			"the secondary device.\n");
+		dev_info(&pdev->dev, "can't find Nforce3 secondary device\n");
 		return -ENODEV;
 	}
 
@@ -448,7 +448,7 @@ static int nforce3_agp_init(struct pci_dev *pdev)
 			break;
 
 	if (i == ARRAY_SIZE(nforce3_sizes)) {
-		printk(KERN_INFO PFX "No NForce3 size found for %d\n", size);
+		dev_info(&pdev->dev, "no NForce3 size found for %d\n", size);
 		return -ENODEV;
 	}
 
@@ -462,7 +462,7 @@ static int nforce3_agp_init(struct pci_dev *pdev)
 
 	/* if x86-64 aperture base is beyond 4G, exit here */
 	if ( (apbase & 0x7fff) >> (32 - 25) ) {
-		printk(KERN_INFO PFX "aperture base > 4G\n");
+		dev_info(&pdev->dev, "aperture base > 4G\n");
 		return -ENODEV;
 	}
 
@@ -489,6 +489,7 @@ static int __devinit agp_amd64_probe(struct pci_dev *pdev,
 {
 	struct agp_bridge_data *bridge;
 	u8 cap_ptr;
+	int err;
 
 	cap_ptr = pci_find_capability(pdev, PCI_CAP_ID_AGP);
 	if (!cap_ptr)
@@ -504,7 +505,8 @@ static int __devinit agp_amd64_probe(struct pci_dev *pdev,
 	    pdev->device == PCI_DEVICE_ID_AMD_8151_0) {
 		amd8151_init(pdev, bridge);
 	} else {
-		printk(KERN_INFO PFX "Detected AGP bridge %x\n", pdev->devfn);
+		dev_info(&pdev->dev, "AGP bridge [%04x/%04x]\n",
+			 pdev->vendor, pdev->device);
 	}
 
 	bridge->driver = &amd_8151_driver;
@@ -536,7 +538,12 @@ static int __devinit agp_amd64_probe(struct pci_dev *pdev,
 	}
 
 	pci_set_drvdata(pdev, bridge);
-	return agp_add_bridge(bridge);
+	err = agp_add_bridge(bridge);
+	if (err < 0)
+		return err;
+
+	agp_bridges_found++;
+	return 0;
 }
 
 static void __devexit agp_amd64_remove(struct pci_dev *pdev)
@@ -713,7 +720,11 @@ int __init agp_amd64_init(void)
 
 	if (agp_off)
 		return -EINVAL;
-	if (pci_register_driver(&agp_amd64_pci_driver) < 0) {
+	err = pci_register_driver(&agp_amd64_pci_driver);
+	if (err < 0)
+		return err;
+
+	if (agp_bridges_found == 0) {
 		struct pci_dev *dev;
 		if (!agp_try_unsupported && !agp_try_unsupported_boot) {
 			printk(KERN_INFO PFX "No supported AGP bridge found.\n");
diff --git a/drivers/char/agp/ati-agp.c b/drivers/char/agp/ati-agp.c
index 3a4566c0d84f..6ecbcafb34b1 100644
--- a/drivers/char/agp/ati-agp.c
+++ b/drivers/char/agp/ati-agp.c
@@ -486,8 +486,8 @@ static int __devinit agp_ati_probe(struct pci_dev *pdev,
 			goto found;
 	}
 
-	printk(KERN_ERR PFX
-	     "Unsupported Ati chipset (device id: %04x)\n", pdev->device);
+	dev_err(&pdev->dev, "unsupported Ati chipset [%04x/%04x])\n",
+		pdev->vendor, pdev->device);
 	return -ENODEV;
 
 found:
@@ -500,8 +500,7 @@ found:
 
 	bridge->driver = &ati_generic_bridge;
 
-	printk(KERN_INFO PFX "Detected Ati %s chipset\n",
-			devs[j].chipset_name);
+	dev_info(&pdev->dev, "Ati %s chipset\n", devs[j].chipset_name);
 
 	/* Fill in the mode register */
 	pci_read_config_dword(pdev,
diff --git a/drivers/char/agp/backend.c b/drivers/char/agp/backend.c
index 1ec87104e68c..3a3cc03d401c 100644
--- a/drivers/char/agp/backend.c
+++ b/drivers/char/agp/backend.c
@@ -144,7 +144,8 @@ static int agp_backend_initialize(struct agp_bridge_data *bridge)
 		void *addr = bridge->driver->agp_alloc_page(bridge);
 
 		if (!addr) {
-			printk(KERN_ERR PFX "unable to get memory for scratch page.\n");
+			dev_err(&bridge->dev->dev,
+				"can't get memory for scratch page\n");
 			return -ENOMEM;
 		}
 
@@ -155,13 +156,13 @@ static int agp_backend_initialize(struct agp_bridge_data *bridge)
 
 	size_value = bridge->driver->fetch_size();
 	if (size_value == 0) {
-		printk(KERN_ERR PFX "unable to determine aperture size.\n");
+		dev_err(&bridge->dev->dev, "can't determine aperture size\n");
 		rc = -EINVAL;
 		goto err_out;
 	}
 	if (bridge->driver->create_gatt_table(bridge)) {
-		printk(KERN_ERR PFX
-		    "unable to get memory for graphics translation table.\n");
+		dev_err(&bridge->dev->dev,
+			"can't get memory for graphics translation table\n");
 		rc = -ENOMEM;
 		goto err_out;
 	}
@@ -169,7 +170,8 @@ static int agp_backend_initialize(struct agp_bridge_data *bridge)
 
 	bridge->key_list = vmalloc(PAGE_SIZE * 4);
 	if (bridge->key_list == NULL) {
-		printk(KERN_ERR PFX "error allocating memory for key lists.\n");
+		dev_err(&bridge->dev->dev,
+			"can't allocate memory for key lists\n");
 		rc = -ENOMEM;
 		goto err_out;
 	}
@@ -179,10 +181,12 @@ static int agp_backend_initialize(struct agp_bridge_data *bridge)
 	memset(bridge->key_list, 0, PAGE_SIZE * 4);
 
 	if (bridge->driver->configure()) {
-		printk(KERN_ERR PFX "error configuring host chipset.\n");
+		dev_err(&bridge->dev->dev, "error configuring host chipset\n");
 		rc = -EINVAL;
 		goto err_out;
 	}
+	INIT_LIST_HEAD(&bridge->mapped_list);
+	spin_lock_init(&bridge->mapped_lock);
 
 	return 0;
 
@@ -269,25 +273,27 @@ int agp_add_bridge(struct agp_bridge_data *bridge)
 
 	/* Grab reference on the chipset driver. */
 	if (!try_module_get(bridge->driver->owner)) {
-		printk (KERN_INFO PFX "Couldn't lock chipset driver.\n");
+		dev_info(&bridge->dev->dev, "can't lock chipset driver\n");
 		return -EINVAL;
 	}
 
 	error = agp_backend_initialize(bridge);
 	if (error) {
-		printk (KERN_INFO PFX "agp_backend_initialize() failed.\n");
+		dev_info(&bridge->dev->dev,
+			 "agp_backend_initialize() failed\n");
 		goto err_out;
 	}
 
 	if (list_empty(&agp_bridges)) {
 		error = agp_frontend_initialize();
 		if (error) {
-			printk (KERN_INFO PFX "agp_frontend_initialize() failed.\n");
+			dev_info(&bridge->dev->dev,
+				 "agp_frontend_initialize() failed\n");
 			goto frontend_err;
 		}
 
-		printk(KERN_INFO PFX "AGP aperture is %dM @ 0x%lx\n",
-			bridge->driver->fetch_size(), bridge->gart_bus_addr);
+		dev_info(&bridge->dev->dev, "AGP aperture is %dM @ 0x%lx\n",
+			 bridge->driver->fetch_size(), bridge->gart_bus_addr);
 
 	}
 
diff --git a/drivers/char/agp/generic.c b/drivers/char/agp/generic.c
index eaa1a355bb32..118dbde25dc7 100644
--- a/drivers/char/agp/generic.c
+++ b/drivers/char/agp/generic.c
@@ -429,6 +429,10 @@ int agp_bind_memory(struct agp_memory *curr, off_t pg_start)
 
 	curr->is_bound = true;
 	curr->pg_start = pg_start;
+	spin_lock(&agp_bridge->mapped_lock);
+	list_add(&curr->mapped_list, &agp_bridge->mapped_list);
+	spin_unlock(&agp_bridge->mapped_lock);
+
 	return 0;
 }
 EXPORT_SYMBOL(agp_bind_memory);
@@ -461,10 +465,34 @@ int agp_unbind_memory(struct agp_memory *curr)
 
 	curr->is_bound = false;
 	curr->pg_start = 0;
+	spin_lock(&curr->bridge->mapped_lock);
+	list_del(&curr->mapped_list);
+	spin_unlock(&curr->bridge->mapped_lock);
 	return 0;
 }
 EXPORT_SYMBOL(agp_unbind_memory);
 
+/**
+ *	agp_rebind_emmory  -  Rewrite the entire GATT, useful on resume
+ */
+int agp_rebind_memory(void)
+{
+	struct agp_memory *curr;
+	int ret_val = 0;
+
+	spin_lock(&agp_bridge->mapped_lock);
+	list_for_each_entry(curr, &agp_bridge->mapped_list, mapped_list) {
+		ret_val = curr->bridge->driver->insert_memory(curr,
+							      curr->pg_start,
+							      curr->type);
+		if (ret_val != 0)
+			break;
+	}
+	spin_unlock(&agp_bridge->mapped_lock);
+	return ret_val;
+}
+EXPORT_SYMBOL(agp_rebind_memory);
+
 /* End - Routines for handling swapping of agp_memory into the GATT */
 
 
@@ -771,8 +799,8 @@ void agp_device_command(u32 bridge_agpstat, bool agp_v3)
 		if (!agp)
 			continue;
 
-		printk(KERN_INFO PFX "Putting AGP V%d device at %s into %dx mode\n",
-				agp_v3 ? 3 : 2, pci_name(device), mode);
+		dev_info(&device->dev, "putting AGP V%d device into %dx mode\n",
+			 agp_v3 ? 3 : 2, mode);
 		pci_write_config_dword(device, agp + PCI_AGP_COMMAND, bridge_agpstat);
 	}
 }
@@ -800,10 +828,8 @@ void agp_generic_enable(struct agp_bridge_data *bridge, u32 requested_mode)
 
 	get_agp_version(agp_bridge);
 
-	printk(KERN_INFO PFX "Found an AGP %d.%d compliant device at %s.\n",
-				agp_bridge->major_version,
-				agp_bridge->minor_version,
-				pci_name(agp_bridge->dev));
+	dev_info(&agp_bridge->dev->dev, "AGP %d.%d bridge\n",
+		 agp_bridge->major_version, agp_bridge->minor_version);
 
 	pci_read_config_dword(agp_bridge->dev,
 		      agp_bridge->capndx + PCI_AGP_STATUS, &bridge_agpstat);
@@ -832,8 +858,7 @@ void agp_generic_enable(struct agp_bridge_data *bridge, u32 requested_mode)
 		    pci_write_config_dword(bridge->dev,
 					bridge->capndx+AGPCTRL, temp);
 
-		    printk(KERN_INFO PFX "Device is in legacy mode,"
-				" falling back to 2.x\n");
+		    dev_info(&bridge->dev->dev, "bridge is in legacy mode, falling back to 2.x\n");
 		}
 	}
 
diff --git a/drivers/char/agp/intel-agp.c b/drivers/char/agp/intel-agp.c
index df702642ab8f..016fdf0623a4 100644
--- a/drivers/char/agp/intel-agp.c
+++ b/drivers/char/agp/intel-agp.c
@@ -32,8 +32,8 @@
 #define PCI_DEVICE_ID_INTEL_Q35_IG          0x29B2
 #define PCI_DEVICE_ID_INTEL_Q33_HB          0x29D0
 #define PCI_DEVICE_ID_INTEL_Q33_IG          0x29D2
-#define PCI_DEVICE_ID_INTEL_IGD_HB          0x2A40
-#define PCI_DEVICE_ID_INTEL_IGD_IG          0x2A42
+#define PCI_DEVICE_ID_INTEL_GM45_HB         0x2A40
+#define PCI_DEVICE_ID_INTEL_GM45_IG         0x2A42
 #define PCI_DEVICE_ID_INTEL_IGD_E_HB        0x2E00
 #define PCI_DEVICE_ID_INTEL_IGD_E_IG        0x2E02
 #define PCI_DEVICE_ID_INTEL_Q45_HB          0x2E10
@@ -55,7 +55,7 @@
 		 agp_bridge->dev->device == PCI_DEVICE_ID_INTEL_82965G_HB || \
 		 agp_bridge->dev->device == PCI_DEVICE_ID_INTEL_82965GM_HB || \
 		 agp_bridge->dev->device == PCI_DEVICE_ID_INTEL_82965GME_HB || \
-		 agp_bridge->dev->device == PCI_DEVICE_ID_INTEL_IGD_HB)
+		 agp_bridge->dev->device == PCI_DEVICE_ID_INTEL_GM45_HB)
 
 #define IS_G33 (agp_bridge->dev->device == PCI_DEVICE_ID_INTEL_G33_HB || \
 		agp_bridge->dev->device == PCI_DEVICE_ID_INTEL_Q35_HB || \
@@ -161,7 +161,7 @@ static int intel_i810_fetch_size(void)
 	values = A_SIZE_FIX(agp_bridge->driver->aperture_sizes);
 
 	if ((smram_miscc & I810_GMS) == I810_GMS_DISABLE) {
-		printk(KERN_WARNING PFX "i810 is disabled\n");
+		dev_warn(&agp_bridge->dev->dev, "i810 is disabled\n");
 		return 0;
 	}
 	if ((smram_miscc & I810_GFX_MEM_WIN_SIZE) == I810_GFX_MEM_WIN_32M) {
@@ -193,7 +193,8 @@ static int intel_i810_configure(void)
 
 		intel_private.registers = ioremap(temp, 128 * 4096);
 		if (!intel_private.registers) {
-			printk(KERN_ERR PFX "Unable to remap memory.\n");
+			dev_err(&intel_private.pcidev->dev,
+				"can't remap memory\n");
 			return -ENOMEM;
 		}
 	}
@@ -201,7 +202,8 @@ static int intel_i810_configure(void)
 	if ((readl(intel_private.registers+I810_DRAM_CTL)
 		& I810_DRAM_ROW_0) == I810_DRAM_ROW_0_SDRAM) {
 		/* This will need to be dynamically assigned */
-		printk(KERN_INFO PFX "detected 4MB dedicated video ram.\n");
+		dev_info(&intel_private.pcidev->dev,
+			 "detected 4MB dedicated video ram\n");
 		intel_private.num_dcache_entries = 1024;
 	}
 	pci_read_config_dword(intel_private.pcidev, I810_GMADDR, &temp);
@@ -500,8 +502,8 @@ static void intel_i830_init_gtt_entries(void)
 			size = 1024 + 512;
 			break;
 		default:
-			printk(KERN_INFO PFX "Unknown page table size, "
-			       "assuming 512KB\n");
+			dev_info(&intel_private.pcidev->dev,
+				 "unknown page table size, assuming 512KB\n");
 			size = 512;
 		}
 		size += 4; /* add in BIOS popup space */
@@ -515,8 +517,8 @@ static void intel_i830_init_gtt_entries(void)
 			size = 2048;
 			break;
 		default:
-			printk(KERN_INFO PFX "Unknown page table size 0x%x, "
-				"assuming 512KB\n",
+			dev_info(&agp_bridge->dev->dev,
+				 "unknown page table size 0x%x, assuming 512KB\n",
 				(gmch_ctrl & G33_PGETBL_SIZE_MASK));
 			size = 512;
 		}
@@ -627,11 +629,11 @@ static void intel_i830_init_gtt_entries(void)
 		}
 	}
 	if (gtt_entries > 0)
-		printk(KERN_INFO PFX "Detected %dK %s memory.\n",
+		dev_info(&agp_bridge->dev->dev, "detected %dK %s memory\n",
 		       gtt_entries / KB(1), local ? "local" : "stolen");
 	else
-		printk(KERN_INFO PFX
-		       "No pre-allocated video memory detected.\n");
+		dev_info(&agp_bridge->dev->dev,
+		       "no pre-allocated video memory detected\n");
 	gtt_entries /= KB(4);
 
 	intel_private.gtt_entries = gtt_entries;
@@ -801,10 +803,12 @@ static int intel_i830_insert_entries(struct agp_memory *mem, off_t pg_start,
 	num_entries = A_SIZE_FIX(temp)->num_entries;
 
 	if (pg_start < intel_private.gtt_entries) {
-		printk(KERN_DEBUG PFX "pg_start == 0x%.8lx,intel_private.gtt_entries == 0x%.8x\n",
-				pg_start, intel_private.gtt_entries);
+		dev_printk(KERN_DEBUG, &intel_private.pcidev->dev,
+			   "pg_start == 0x%.8lx, intel_private.gtt_entries == 0x%.8x\n",
+			   pg_start, intel_private.gtt_entries);
 
-		printk(KERN_INFO PFX "Trying to insert into local/stolen memory\n");
+		dev_info(&intel_private.pcidev->dev,
+			 "trying to insert into local/stolen memory\n");
 		goto out_err;
 	}
 
@@ -851,7 +855,8 @@ static int intel_i830_remove_entries(struct agp_memory *mem, off_t pg_start,
 		return 0;
 
 	if (pg_start < intel_private.gtt_entries) {
-		printk(KERN_INFO PFX "Trying to disable local/stolen memory\n");
+		dev_info(&intel_private.pcidev->dev,
+			 "trying to disable local/stolen memory\n");
 		return -EINVAL;
 	}
 
@@ -957,7 +962,7 @@ static void intel_i9xx_setup_flush(void)
 	if (intel_private.ifp_resource.start) {
 		intel_private.i9xx_flush_page = ioremap_nocache(intel_private.ifp_resource.start, PAGE_SIZE);
 		if (!intel_private.i9xx_flush_page)
-			printk(KERN_INFO "unable to ioremap flush  page - no chipset flushing");
+			dev_info(&intel_private.pcidev->dev, "can't ioremap flush page - no chipset flushing");
 	}
 }
 
@@ -1028,10 +1033,12 @@ static int intel_i915_insert_entries(struct agp_memory *mem, off_t pg_start,
 	num_entries = A_SIZE_FIX(temp)->num_entries;
 
 	if (pg_start < intel_private.gtt_entries) {
-		printk(KERN_DEBUG PFX "pg_start == 0x%.8lx,intel_private.gtt_entries == 0x%.8x\n",
-				pg_start, intel_private.gtt_entries);
+		dev_printk(KERN_DEBUG, &intel_private.pcidev->dev,
+			   "pg_start == 0x%.8lx, intel_private.gtt_entries == 0x%.8x\n",
+			   pg_start, intel_private.gtt_entries);
 
-		printk(KERN_INFO PFX "Trying to insert into local/stolen memory\n");
+		dev_info(&intel_private.pcidev->dev,
+			 "trying to insert into local/stolen memory\n");
 		goto out_err;
 	}
 
@@ -1078,7 +1085,8 @@ static int intel_i915_remove_entries(struct agp_memory *mem, off_t pg_start,
 		return 0;
 
 	if (pg_start < intel_private.gtt_entries) {
-		printk(KERN_INFO PFX "Trying to disable local/stolen memory\n");
+		dev_info(&intel_private.pcidev->dev,
+			 "trying to disable local/stolen memory\n");
 		return -EINVAL;
 	}
 
@@ -1182,7 +1190,7 @@ static unsigned long intel_i965_mask_memory(struct agp_bridge_data *bridge,
 static void intel_i965_get_gtt_range(int *gtt_offset, int *gtt_size)
 {
 	switch (agp_bridge->dev->device) {
-	case PCI_DEVICE_ID_INTEL_IGD_HB:
+	case PCI_DEVICE_ID_INTEL_GM45_HB:
 	case PCI_DEVICE_ID_INTEL_IGD_E_HB:
 	case PCI_DEVICE_ID_INTEL_Q45_HB:
 	case PCI_DEVICE_ID_INTEL_G45_HB:
@@ -1379,7 +1387,7 @@ static int intel_815_configure(void)
 	/* the Intel 815 chipset spec. says that bits 29-31 in the
 	* ATTBASE register are reserved -> try not to write them */
 	if (agp_bridge->gatt_bus_addr & INTEL_815_ATTBASE_MASK) {
-		printk(KERN_EMERG PFX "gatt bus addr too high");
+		dev_emerg(&agp_bridge->dev->dev, "gatt bus addr too high");
 		return -EINVAL;
 	}
 
@@ -2117,8 +2125,8 @@ static const struct intel_driver_description {
 		NULL, &intel_g33_driver },
 	{ PCI_DEVICE_ID_INTEL_Q33_HB, PCI_DEVICE_ID_INTEL_Q33_IG, 0, "Q33",
 		NULL, &intel_g33_driver },
-	{ PCI_DEVICE_ID_INTEL_IGD_HB, PCI_DEVICE_ID_INTEL_IGD_IG, 0,
-	    "Intel Integrated Graphics Device", NULL, &intel_i965_driver },
+	{ PCI_DEVICE_ID_INTEL_GM45_HB, PCI_DEVICE_ID_INTEL_GM45_IG, 0,
+	    "Mobile Intel? GM45 Express", NULL, &intel_i965_driver },
 	{ PCI_DEVICE_ID_INTEL_IGD_E_HB, PCI_DEVICE_ID_INTEL_IGD_E_IG, 0,
 	    "Intel Integrated Graphics Device", NULL, &intel_i965_driver },
 	{ PCI_DEVICE_ID_INTEL_Q45_HB, PCI_DEVICE_ID_INTEL_Q45_IG, 0,
@@ -2163,8 +2171,8 @@ static int __devinit agp_intel_probe(struct pci_dev *pdev,
 
 	if (intel_agp_chipsets[i].name == NULL) {
 		if (cap_ptr)
-			printk(KERN_WARNING PFX "Unsupported Intel chipset"
-			       "(device id: %04x)\n", pdev->device);
+			dev_warn(&pdev->dev, "unsupported Intel chipset [%04x/%04x]\n",
+				 pdev->vendor, pdev->device);
 		agp_put_bridge(bridge);
 		return -ENODEV;
 	}
@@ -2172,9 +2180,8 @@ static int __devinit agp_intel_probe(struct pci_dev *pdev,
 	if (bridge->driver == NULL) {
 		/* bridge has no AGP and no IGD detected */
 		if (cap_ptr)
-			printk(KERN_WARNING PFX "Failed to find bridge device "
-				"(chip_id: %04x)\n",
-				intel_agp_chipsets[i].gmch_chip_id);
+			dev_warn(&pdev->dev, "can't find bridge device (chip_id: %04x)\n",
+				 intel_agp_chipsets[i].gmch_chip_id);
 		agp_put_bridge(bridge);
 		return -ENODEV;
 	}
@@ -2183,8 +2190,7 @@ static int __devinit agp_intel_probe(struct pci_dev *pdev,
 	bridge->capndx = cap_ptr;
 	bridge->dev_private_data = &intel_private;
 
-	printk(KERN_INFO PFX "Detected an Intel %s Chipset.\n",
-		intel_agp_chipsets[i].name);
+	dev_info(&pdev->dev, "Intel %s Chipset\n", intel_agp_chipsets[i].name);
 
 	/*
 	* The following fixes the case where the BIOS has "forgotten" to
@@ -2194,7 +2200,7 @@ static int __devinit agp_intel_probe(struct pci_dev *pdev,
 	r = &pdev->resource[0];
 	if (!r->start && r->end) {
 		if (pci_assign_resource(pdev, 0)) {
-			printk(KERN_ERR PFX "could not assign resource 0\n");
+			dev_err(&pdev->dev, "can't assign resource 0\n");
 			agp_put_bridge(bridge);
 			return -ENODEV;
 		}
@@ -2206,7 +2212,7 @@ static int __devinit agp_intel_probe(struct pci_dev *pdev,
 	* 20030610 - hamish@zot.org
 	*/
 	if (pci_enable_device(pdev)) {
-		printk(KERN_ERR PFX "Unable to Enable PCI device\n");
+		dev_err(&pdev->dev, "can't enable PCI device\n");
 		agp_put_bridge(bridge);
 		return -ENODEV;
 	}
@@ -2238,6 +2244,7 @@ static void __devexit agp_intel_remove(struct pci_dev *pdev)
 static int agp_intel_resume(struct pci_dev *pdev)
 {
 	struct agp_bridge_data *bridge = pci_get_drvdata(pdev);
+	int ret_val;
 
 	pci_restore_state(pdev);
 
@@ -2265,6 +2272,10 @@ static int agp_intel_resume(struct pci_dev *pdev)
 	else if (bridge->driver == &intel_i965_driver)
 		intel_i915_configure();
 
+	ret_val = agp_rebind_memory();
+	if (ret_val != 0)
+		return ret_val;
+
 	return 0;
 }
 #endif
@@ -2315,7 +2326,7 @@ static struct pci_device_id agp_intel_pci_table[] = {
 	ID(PCI_DEVICE_ID_INTEL_G33_HB),
 	ID(PCI_DEVICE_ID_INTEL_Q35_HB),
 	ID(PCI_DEVICE_ID_INTEL_Q33_HB),
-	ID(PCI_DEVICE_ID_INTEL_IGD_HB),
+	ID(PCI_DEVICE_ID_INTEL_GM45_HB),
 	ID(PCI_DEVICE_ID_INTEL_IGD_E_HB),
 	ID(PCI_DEVICE_ID_INTEL_Q45_HB),
 	ID(PCI_DEVICE_ID_INTEL_G45_HB),
diff --git a/drivers/char/agp/isoch.c b/drivers/char/agp/isoch.c
index 3f9ccde62377..c73385cc4b8a 100644
--- a/drivers/char/agp/isoch.c
+++ b/drivers/char/agp/isoch.c
@@ -153,7 +153,7 @@ static int agp_3_5_isochronous_node_enable(struct agp_bridge_data *bridge,
 
 	/* Check if this configuration has any chance of working */
 	if (tot_bw > target.maxbw) {
-		printk(KERN_ERR PFX "isochronous bandwidth required "
+		dev_err(&td->dev, "isochronous bandwidth required "
 			"by AGP 3.0 devices exceeds that which is supported by "
 			"the AGP 3.0 bridge!\n");
 		ret = -ENODEV;
@@ -188,7 +188,7 @@ static int agp_3_5_isochronous_node_enable(struct agp_bridge_data *bridge,
 	/* Exit if the minimal ISOCH_N allocation among the masters is more
 	 * than the target can handle. */
 	if (tot_n > target.n) {
-		printk(KERN_ERR PFX "number of isochronous "
+		dev_err(&td->dev, "number of isochronous "
 			"transactions per period required by AGP 3.0 devices "
 			"exceeds that which is supported by the AGP 3.0 "
 			"bridge!\n");
@@ -229,7 +229,7 @@ static int agp_3_5_isochronous_node_enable(struct agp_bridge_data *bridge,
 	/* Exit if the minimal RQ needs of the masters exceeds what the target
 	 * can provide. */
 	if (tot_rq > rq_isoch) {
-		printk(KERN_ERR PFX "number of request queue slots "
+		dev_err(&td->dev, "number of request queue slots "
 			"required by the isochronous bandwidth requested by "
 			"AGP 3.0 devices exceeds the number provided by the "
 			"AGP 3.0 bridge!\n");
@@ -359,8 +359,9 @@ int agp_3_5_enable(struct agp_bridge_data *bridge)
 			case 0x0001:    /* Unclassified device */
 				/* Don't know what this is, but log it for investigation. */
 				if (mcapndx != 0) {
-					printk (KERN_INFO PFX "Wacky, found unclassified AGP device. %x:%x\n",
-						dev->vendor, dev->device);
+					dev_info(&td->dev, "wacky, found unclassified AGP device %s [%04x/%04x]\n",
+						 pci_name(dev),
+						 dev->vendor, dev->device);
 				}
 				continue;
 
@@ -407,17 +408,18 @@ int agp_3_5_enable(struct agp_bridge_data *bridge)
 		}
 
 		if (mcapndx == 0) {
-			printk(KERN_ERR PFX "woah!  Non-AGP device "
-				"found on the secondary bus of an AGP 3.5 bridge!\n");
+			dev_err(&td->dev, "woah!  Non-AGP device %s on "
+				"secondary bus of AGP 3.5 bridge!\n",
+				pci_name(dev));
 			ret = -ENODEV;
 			goto free_and_exit;
 		}
 
 		mmajor = (ncapid >> AGP_MAJOR_VERSION_SHIFT) & 0xf;
 		if (mmajor < 3) {
-			printk(KERN_ERR PFX "woah!  AGP 2.0 device "
-				"found on the secondary bus of an AGP 3.5 "
-				"bridge operating with AGP 3.0 electricals!\n");
+			dev_err(&td->dev, "woah!  AGP 2.0 device %s on "
+				"secondary bus of AGP 3.5 bridge operating "
+				"with AGP 3.0 electricals!\n", pci_name(dev));
 			ret = -ENODEV;
 			goto free_and_exit;
 		}
@@ -427,10 +429,10 @@ int agp_3_5_enable(struct agp_bridge_data *bridge)
 		pci_read_config_dword(dev, cur->capndx+AGPSTAT, &mstatus);
 
 		if (((mstatus >> 3) & 0x1) == 0) {
-			printk(KERN_ERR PFX "woah!  AGP 3.x device "
-				"not operating in AGP 3.x mode found on the "
-				"secondary bus of an AGP 3.5 bridge operating "
-				"with AGP 3.0 electricals!\n");
+			dev_err(&td->dev, "woah!  AGP 3.x device %s not "
+				"operating in AGP 3.x mode on secondary bus "
+				"of AGP 3.5 bridge operating with AGP 3.0 "
+				"electricals!\n", pci_name(dev));
 			ret = -ENODEV;
 			goto free_and_exit;
 		}
@@ -444,9 +446,9 @@ int agp_3_5_enable(struct agp_bridge_data *bridge)
 	if (isoch) {
 		ret = agp_3_5_isochronous_node_enable(bridge, dev_list, ndevs);
 		if (ret) {
-			printk(KERN_INFO PFX "Something bad happened setting "
-			       "up isochronous xfers.  Falling back to "
-			       "non-isochronous xfer mode.\n");
+			dev_info(&td->dev, "something bad happened setting "
+				 "up isochronous xfers; falling back to "
+				 "non-isochronous xfer mode\n");
 		} else {
 			goto free_and_exit;
 		}
@@ -466,4 +468,3 @@ free_and_exit:
 get_out:
 	return ret;
 }
-
diff --git a/drivers/char/agp/sis-agp.c b/drivers/char/agp/sis-agp.c
index b6791846809f..2587ef96a960 100644
--- a/drivers/char/agp/sis-agp.c
+++ b/drivers/char/agp/sis-agp.c
@@ -79,10 +79,8 @@ static void sis_delayed_enable(struct agp_bridge_data *bridge, u32 mode)
 	u32 command;
 	int rate;
 
-	printk(KERN_INFO PFX "Found an AGP %d.%d compliant device at %s.\n",
-		agp_bridge->major_version,
-		agp_bridge->minor_version,
-		pci_name(agp_bridge->dev));
+	dev_info(&agp_bridge->dev->dev, "AGP %d.%d bridge\n",
+		 agp_bridge->major_version, agp_bridge->minor_version);
 
 	pci_read_config_dword(agp_bridge->dev, agp_bridge->capndx + PCI_AGP_STATUS, &command);
 	command = agp_collect_device_status(bridge, mode, command);
@@ -94,8 +92,8 @@ static void sis_delayed_enable(struct agp_bridge_data *bridge, u32 mode)
 		if (!agp)
 			continue;
 
-		printk(KERN_INFO PFX "Putting AGP V3 device at %s into %dx mode\n",
-			pci_name(device), rate);
+		dev_info(&agp_bridge->dev->dev, "putting AGP V3 device at %s into %dx mode\n",
+			 pci_name(device), rate);
 
 		pci_write_config_dword(device, agp + PCI_AGP_COMMAND, command);
 
@@ -105,7 +103,7 @@ static void sis_delayed_enable(struct agp_bridge_data *bridge, u32 mode)
 		 * cannot be configured
 		 */
 		if (device->device == bridge->dev->device) {
-			printk(KERN_INFO PFX "SiS delay workaround: giving bridge time to recover.\n");
+			dev_info(&agp_bridge->dev->dev, "SiS delay workaround: giving bridge time to recover\n");
 			msleep(10);
 		}
 	}
@@ -190,7 +188,8 @@ static int __devinit agp_sis_probe(struct pci_dev *pdev,
 		return -ENODEV;
 
 
-	printk(KERN_INFO PFX "Detected SiS chipset - id:%i\n", pdev->device);
+	dev_info(&pdev->dev, "SiS chipset [%04x/%04x]\n",
+		 pdev->vendor, pdev->device);
 	bridge = agp_alloc_bridge();
 	if (!bridge)
 		return -ENOMEM;
@@ -242,7 +241,7 @@ static struct pci_device_id agp_sis_pci_table[] = {
 		.class		= (PCI_CLASS_BRIDGE_HOST << 8),
 		.class_mask	= ~0,
 		.vendor		= PCI_VENDOR_ID_SI,
-		.device		= PCI_DEVICE_ID_SI_5591_AGP,
+		.device		= PCI_DEVICE_ID_SI_5591,
 		.subvendor	= PCI_ANY_ID,
 		.subdevice	= PCI_ANY_ID,
 	},
diff --git a/drivers/char/agp/sworks-agp.c b/drivers/char/agp/sworks-agp.c
index 0e054c134490..2fb27fe4c10c 100644
--- a/drivers/char/agp/sworks-agp.c
+++ b/drivers/char/agp/sworks-agp.c
@@ -241,7 +241,8 @@ static void serverworks_tlbflush(struct agp_memory *temp)
 	while (readb(serverworks_private.registers+SVWRKS_POSTFLUSH) == 1) {
 		cpu_relax();
 		if (time_after(jiffies, timeout)) {
-			printk(KERN_ERR PFX "TLB post flush took more than 3 seconds\n");
+			dev_err(&serverworks_private.svrwrks_dev->dev,
+				"TLB post flush took more than 3 seconds\n");
 			break;
 		}
 	}
@@ -251,7 +252,8 @@ static void serverworks_tlbflush(struct agp_memory *temp)
 	while (readl(serverworks_private.registers+SVWRKS_DIRFLUSH) == 1) {
 		cpu_relax();
 		if (time_after(jiffies, timeout)) {
-			printk(KERN_ERR PFX "TLB Dir flush took more than 3 seconds\n");
+			dev_err(&serverworks_private.svrwrks_dev->dev,
+				"TLB Dir flush took more than 3 seconds\n");
 			break;
 		}
 	}
@@ -271,7 +273,7 @@ static int serverworks_configure(void)
 	temp = (temp & PCI_BASE_ADDRESS_MEM_MASK);
 	serverworks_private.registers = (volatile u8 __iomem *) ioremap(temp, 4096);
 	if (!serverworks_private.registers) {
-		printk (KERN_ERR PFX "Unable to ioremap() memory.\n");
+		dev_err(&agp_bridge->dev->dev, "can't ioremap(%#x)\n", temp);
 		return -ENOMEM;
 	}
 
@@ -451,7 +453,7 @@ static int __devinit agp_serverworks_probe(struct pci_dev *pdev,
 
 	switch (pdev->device) {
 	case 0x0006:
-		printk (KERN_ERR PFX "ServerWorks CNB20HE is unsupported due to lack of documentation.\n");
+		dev_err(&pdev->dev, "ServerWorks CNB20HE is unsupported due to lack of documentation\n");
 		return -ENODEV;
 
 	case PCI_DEVICE_ID_SERVERWORKS_HE:
@@ -461,8 +463,8 @@ static int __devinit agp_serverworks_probe(struct pci_dev *pdev,
 
 	default:
 		if (cap_ptr)
-			printk(KERN_ERR PFX "Unsupported Serverworks chipset "
-					"(device id: %04x)\n", pdev->device);
+			dev_err(&pdev->dev, "unsupported Serverworks chipset "
+				"[%04x/%04x]\n", pdev->vendor, pdev->device);
 		return -ENODEV;
 	}
 
@@ -470,8 +472,7 @@ static int __devinit agp_serverworks_probe(struct pci_dev *pdev,
 	bridge_dev = pci_get_bus_and_slot((unsigned int)pdev->bus->number,
 			PCI_DEVFN(0, 1));
 	if (!bridge_dev) {
-		printk(KERN_INFO PFX "Detected a Serverworks chipset "
-		       "but could not find the secondary device.\n");
+		dev_info(&pdev->dev, "can't find secondary device\n");
 		return -ENODEV;
 	}
 
@@ -482,8 +483,8 @@ static int __devinit agp_serverworks_probe(struct pci_dev *pdev,
 	if (temp & PCI_BASE_ADDRESS_MEM_TYPE_64) {
 		pci_read_config_dword(pdev, SVWRKS_APSIZE + 4, &temp2);
 		if (temp2 != 0) {
-			printk(KERN_INFO PFX "Detected 64 bit aperture address, "
-			       "but top bits are not zero.  Disabling agp\n");
+			dev_info(&pdev->dev, "64 bit aperture address, "
+				 "but top bits are not zero; disabling AGP\n");
 			return -ENODEV;
 		}
 		serverworks_private.mm_addr_ofs = 0x18;
@@ -495,8 +496,8 @@ static int __devinit agp_serverworks_probe(struct pci_dev *pdev,
 		pci_read_config_dword(pdev,
 				serverworks_private.mm_addr_ofs + 4, &temp2);
 		if (temp2 != 0) {
-			printk(KERN_INFO PFX "Detected 64 bit MMIO address, "
-			       "but top bits are not zero.  Disabling agp\n");
+			dev_info(&pdev->dev, "64 bit MMIO address, but top "
+				 "bits are not zero; disabling AGP\n");
 			return -ENODEV;
 		}
 	}
diff --git a/drivers/char/agp/uninorth-agp.c b/drivers/char/agp/uninorth-agp.c
index d2fa3cfca02a..eef72709ec53 100644
--- a/drivers/char/agp/uninorth-agp.c
+++ b/drivers/char/agp/uninorth-agp.c
@@ -46,8 +46,8 @@ static int uninorth_fetch_size(void)
 				break;
 
 		if (i == agp_bridge->driver->num_aperture_sizes) {
-			printk(KERN_ERR PFX "Invalid aperture size, using"
-			       " default\n");
+			dev_err(&agp_bridge->dev->dev, "invalid aperture size, "
+				"using default\n");
 			size = 0;
 			aperture = NULL;
 		}
@@ -108,8 +108,8 @@ static int uninorth_configure(void)
 
 	current_size = A_SIZE_32(agp_bridge->current_size);
 
-	printk(KERN_INFO PFX "configuring for size idx: %d\n",
-	       current_size->size_value);
+	dev_info(&agp_bridge->dev->dev, "configuring for size idx: %d\n",
+		 current_size->size_value);
 
 	/* aperture size and gatt addr */
 	pci_write_config_dword(agp_bridge->dev,
@@ -197,8 +197,9 @@ static int u3_insert_memory(struct agp_memory *mem, off_t pg_start, int type)
 	gp = (u32 *) &agp_bridge->gatt_table[pg_start];
 	for (i = 0; i < mem->page_count; ++i) {
 		if (gp[i]) {
-			printk("u3_insert_memory: entry 0x%x occupied (%x)\n",
-			       i, gp[i]);
+			dev_info(&agp_bridge->dev->dev,
+				 "u3_insert_memory: entry 0x%x occupied (%x)\n",
+				 i, gp[i]);
 			return -EBUSY;
 		}
 	}
@@ -276,8 +277,8 @@ static void uninorth_agp_enable(struct agp_bridge_data *bridge, u32 mode)
 				       &scratch);
 	} while ((scratch & PCI_AGP_COMMAND_AGP) == 0 && ++timeout < 1000);
 	if ((scratch & PCI_AGP_COMMAND_AGP) == 0)
-		printk(KERN_ERR PFX "failed to write UniNorth AGP"
-		       " command register\n");
+		dev_err(&bridge->dev->dev, "can't write UniNorth AGP "
+			"command register\n");
 
 	if (uninorth_rev >= 0x30) {
 		/* This is an AGP V3 */
@@ -330,8 +331,8 @@ static int agp_uninorth_suspend(struct pci_dev *pdev)
 		pci_read_config_dword(device, agp + PCI_AGP_COMMAND, &cmd);
 		if (!(cmd & PCI_AGP_COMMAND_AGP))
 			continue;
-		printk("uninorth-agp: disabling AGP on device %s\n",
-				pci_name(device));
+		dev_info(&pdev->dev, "disabling AGP on device %s\n",
+			 pci_name(device));
 		cmd &= ~PCI_AGP_COMMAND_AGP;
 		pci_write_config_dword(device, agp + PCI_AGP_COMMAND, cmd);
 	}
@@ -341,8 +342,7 @@ static int agp_uninorth_suspend(struct pci_dev *pdev)
 	pci_read_config_dword(pdev, agp + PCI_AGP_COMMAND, &cmd);
 	bridge->dev_private_data = (void *)(long)cmd;
 	if (cmd & PCI_AGP_COMMAND_AGP) {
-		printk("uninorth-agp: disabling AGP on bridge %s\n",
-				pci_name(pdev));
+		dev_info(&pdev->dev, "disabling AGP on bridge\n");
 		cmd &= ~PCI_AGP_COMMAND_AGP;
 		pci_write_config_dword(pdev, agp + PCI_AGP_COMMAND, cmd);
 	}
@@ -591,14 +591,14 @@ static int __devinit agp_uninorth_probe(struct pci_dev *pdev,
 	/* probe for known chipsets */
 	for (j = 0; devs[j].chipset_name != NULL; ++j) {
 		if (pdev->device == devs[j].device_id) {
-			printk(KERN_INFO PFX "Detected Apple %s chipset\n",
-			       devs[j].chipset_name);
+			dev_info(&pdev->dev, "Apple %s chipset\n",
+				 devs[j].chipset_name);
 			goto found;
 		}
 	}
 
-	printk(KERN_ERR PFX "Unsupported Apple chipset (device id: %04x).\n",
-		pdev->device);
+	dev_err(&pdev->dev, "unsupported Apple chipset [%04x/%04x]\n",
+		pdev->vendor, pdev->device);
 	return -ENODEV;
 
  found:
diff --git a/drivers/char/amiserial.c b/drivers/char/amiserial.c
index 3530ff417a51..6e763e3f5a81 100644
--- a/drivers/char/amiserial.c
+++ b/drivers/char/amiserial.c
@@ -1254,7 +1254,7 @@ static int rs_break(struct tty_struct *tty, int break_state)
 	unsigned long flags;
 
 	if (serial_paranoia_check(info, tty->name, "rs_break"))
-		return;
+		return -EINVAL;
 
 	local_irq_save(flags);
 	if (break_state == -1)
diff --git a/drivers/char/ds1302.c b/drivers/char/ds1302.c
index fada6ddefbae..c5e67a623951 100644
--- a/drivers/char/ds1302.c
+++ b/drivers/char/ds1302.c
@@ -20,10 +20,11 @@
 #include <linux/miscdevice.h>
 #include <linux/delay.h>
 #include <linux/bcd.h>
+#include <linux/smp_lock.h>
+#include <linux/uaccess.h>
+#include <linux/io.h>
 
-#include <asm/uaccess.h>
 #include <asm/system.h>
-#include <asm/io.h>
 #include <asm/rtc.h>
 #if defined(CONFIG_M32R)
 #include <asm/m32r.h>
@@ -153,9 +154,7 @@ static unsigned char days_in_mo[] =
 
 /* ioctl that supports RTC_RD_TIME and RTC_SET_TIME (read and set time/date). */
 
-static int
-rtc_ioctl(struct inode *inode, struct file *file, unsigned int cmd,
-	  unsigned long arg)
+static long rtc_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
 {
 	unsigned long flags;
 
@@ -165,7 +164,9 @@ rtc_ioctl(struct inode *inode, struct file *file, unsigned int cmd,
 			struct rtc_time rtc_tm;
 
 			memset(&rtc_tm, 0, sizeof (struct rtc_time));
+			lock_kernel();
 			get_rtc_time(&rtc_tm);
+			unlock_kernel();
 			if (copy_to_user((struct rtc_time*)arg, &rtc_tm, sizeof(struct rtc_time)))
 				return -EFAULT;
 			return 0;
@@ -217,6 +218,7 @@ rtc_ioctl(struct inode *inode, struct file *file, unsigned int cmd,
 			BIN_TO_BCD(mon);
 			BIN_TO_BCD(yrs);
 
+			lock_kernel();
 			local_irq_save(flags);
 			CMOS_WRITE(yrs, RTC_YEAR);
 			CMOS_WRITE(mon, RTC_MONTH);
@@ -225,6 +227,7 @@ rtc_ioctl(struct inode *inode, struct file *file, unsigned int cmd,
 			CMOS_WRITE(min, RTC_MINUTES);
 			CMOS_WRITE(sec, RTC_SECONDS);
 			local_irq_restore(flags);
+			unlock_kernel();
 
 			/* Notice that at this point, the RTC is updated but
 			 * the kernel is still running with the old time.
@@ -244,8 +247,10 @@ rtc_ioctl(struct inode *inode, struct file *file, unsigned int cmd,
 			if(copy_from_user(&tcs_val, (int*)arg, sizeof(int)))
 				return -EFAULT;
 
+			lock_kernel();
 			tcs_val = RTC_TCR_PATTERN | (tcs_val & 0x0F);
 			ds1302_writereg(RTC_TRICKLECHARGER, tcs_val);
+			unlock_kernel();
 			return 0;
 		}
 		default:
@@ -282,7 +287,7 @@ get_rtc_status(char *buf)
 
 static const struct file_operations rtc_fops = {
 	.owner		= THIS_MODULE,
-	.ioctl		= rtc_ioctl,
+	.unlocked_ioctl	= rtc_ioctl,
 };
 
 /* Probe for the chip by writing something to its RAM and try reading it back. */
diff --git a/drivers/char/ds1620.c b/drivers/char/ds1620.c
index 34275c6f1da2..74e9cd81b5b2 100644
--- a/drivers/char/ds1620.c
+++ b/drivers/char/ds1620.c
@@ -10,7 +10,7 @@
 #include <linux/init.h>
 #include <linux/smp_lock.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/uaccess.h>
 #include <asm/therm.h>
diff --git a/drivers/char/dsp56k.c b/drivers/char/dsp56k.c
index 33c466a4888f..ca7c72a486b2 100644
--- a/drivers/char/dsp56k.c
+++ b/drivers/char/dsp56k.c
@@ -36,10 +36,10 @@
 #include <linux/smp_lock.h>
 #include <linux/firmware.h>
 #include <linux/platform_device.h>
+#include <linux/uaccess.h>	/* For put_user and get_user */
 
 #include <asm/atarihw.h>
 #include <asm/traps.h>
-#include <asm/uaccess.h>	/* For put_user and get_user */
 
 #include <asm/dsp56k.h>
 
@@ -303,10 +303,10 @@ static ssize_t dsp56k_write(struct file *file, const char __user *buf, size_t co
 	}
 }
 
-static int dsp56k_ioctl(struct inode *inode, struct file *file,
-			unsigned int cmd, unsigned long arg)
+static long dsp56k_ioctl(struct file *file, unsigned int cmd,
+			 unsigned long arg)
 {
-	int dev = iminor(inode) & 0x0f;
+	int dev = iminor(file->f_path.dentry->d_inode) & 0x0f;
 	void __user *argp = (void __user *)arg;
 
 	switch(dev)
@@ -331,8 +331,9 @@ static int dsp56k_ioctl(struct inode *inode, struct file *file,
 			if (len > DSP56K_MAX_BINARY_LENGTH) {
 				return -EINVAL;
 			}
-    
+			lock_kernel();
 			r = dsp56k_upload(bin, len);
+			unlock_kernel();
 			if (r < 0) {
 				return r;
 			}
@@ -342,12 +343,16 @@ static int dsp56k_ioctl(struct inode *inode, struct file *file,
 		case DSP56K_SET_TX_WSIZE:
 			if (arg > 4 || arg < 1)
 				return -EINVAL;
+			lock_kernel();
 			dsp56k.tx_wsize = (int) arg;
+			unlock_kernel();
 			break;
 		case DSP56K_SET_RX_WSIZE:
 			if (arg > 4 || arg < 1)
 				return -EINVAL;
+			lock_kernel();
 			dsp56k.rx_wsize = (int) arg;
+			unlock_kernel();
 			break;
 		case DSP56K_HOST_FLAGS:
 		{
@@ -359,6 +364,7 @@ static int dsp56k_ioctl(struct inode *inode, struct file *file,
 			if(get_user(out, &hf->out) < 0)
 				return -EFAULT;
 
+			lock_kernel();
 			if ((dir & 0x1) && (out & 0x1))
 				dsp56k_host_interface.icr |= DSP56K_ICR_HF0;
 			else if (dir & 0x1)
@@ -373,14 +379,16 @@ static int dsp56k_ioctl(struct inode *inode, struct file *file,
 			if (dsp56k_host_interface.icr & DSP56K_ICR_HF1) status |= 0x2;
 			if (dsp56k_host_interface.isr & DSP56K_ISR_HF2) status |= 0x4;
 			if (dsp56k_host_interface.isr & DSP56K_ISR_HF3) status |= 0x8;
-
+			unlock_kernel();
 			return put_user(status, &hf->status);
 		}
 		case DSP56K_HOST_CMD:
 			if (arg > 31 || arg < 0)
 				return -EINVAL;
+			lock_kernel();
 			dsp56k_host_interface.cvr = (u_char)((arg & DSP56K_CVR_HV_MASK) |
 							     DSP56K_CVR_HC);
+			unlock_kernel();
 			break;
 		default:
 			return -EINVAL;
@@ -472,7 +480,7 @@ static const struct file_operations dsp56k_fops = {
 	.owner		= THIS_MODULE,
 	.read		= dsp56k_read,
 	.write		= dsp56k_write,
-	.ioctl		= dsp56k_ioctl,
+	.unlocked_ioctl	= dsp56k_ioctl,
 	.open		= dsp56k_open,
 	.release	= dsp56k_release,
 };
diff --git a/drivers/char/efirtc.c b/drivers/char/efirtc.c
index d57ca3e4e534..34d15d548236 100644
--- a/drivers/char/efirtc.c
+++ b/drivers/char/efirtc.c
@@ -37,8 +37,8 @@
 #include <linux/rtc.h>
 #include <linux/proc_fs.h>
 #include <linux/efi.h>
+#include <linux/uaccess.h>
 
-#include <asm/uaccess.h>
 #include <asm/system.h>
 
 #define EFI_RTC_VERSION		"0.4"
@@ -51,8 +51,8 @@
 
 static DEFINE_SPINLOCK(efi_rtc_lock);
 
-static int efi_rtc_ioctl(struct inode *inode, struct file *file,
-		     unsigned int cmd, unsigned long arg);
+static long efi_rtc_ioctl(struct file *file, unsigned int cmd,
+							unsigned long arg);
 
 #define is_leap(year) \
           ((year) % 4 == 0 && ((year) % 100 != 0 || (year) % 400 == 0))
@@ -146,9 +146,8 @@ convert_from_efi_time(efi_time_t *eft, struct rtc_time *wtime)
 	}
 }
 
-static int
-efi_rtc_ioctl(struct inode *inode, struct file *file, unsigned int cmd,
-		     unsigned long arg)
+static long efi_rtc_ioctl(struct file *file, unsigned int cmd,
+							unsigned long arg)
 {
 
 	efi_status_t	status;
@@ -175,13 +174,13 @@ efi_rtc_ioctl(struct inode *inode, struct file *file, unsigned int cmd,
 			return -EINVAL;
 
 		case RTC_RD_TIME:
-
+			lock_kernel();
 			spin_lock_irqsave(&efi_rtc_lock, flags);
 
 			status = efi.get_time(&eft, &cap);
 
 			spin_unlock_irqrestore(&efi_rtc_lock,flags);
-
+			unlock_kernel();
 			if (status != EFI_SUCCESS) {
 				/* should never happen */
 				printk(KERN_ERR "efitime: can't read time\n");
@@ -203,11 +202,13 @@ efi_rtc_ioctl(struct inode *inode, struct file *file, unsigned int cmd,
 
 			convert_to_efi_time(&wtime, &eft);
 
+			lock_kernel();
 			spin_lock_irqsave(&efi_rtc_lock, flags);
 
 			status = efi.set_time(&eft);
 
 			spin_unlock_irqrestore(&efi_rtc_lock,flags);
+			unlock_kernel();
 
 			return status == EFI_SUCCESS ? 0 : -EINVAL;
 
@@ -223,6 +224,7 @@ efi_rtc_ioctl(struct inode *inode, struct file *file, unsigned int cmd,
 
 			convert_to_efi_time(&wtime, &eft);
 
+			lock_kernel();
 			spin_lock_irqsave(&efi_rtc_lock, flags);
 			/*
 			 * XXX Fixme:
@@ -233,16 +235,19 @@ efi_rtc_ioctl(struct inode *inode, struct file *file, unsigned int cmd,
 			status = efi.set_wakeup_time((efi_bool_t)enabled, &eft);
 
 			spin_unlock_irqrestore(&efi_rtc_lock,flags);
+			unlock_kernel();
 
 			return status == EFI_SUCCESS ? 0 : -EINVAL;
 
 		case RTC_WKALM_RD:
 
+			lock_kernel();
 			spin_lock_irqsave(&efi_rtc_lock, flags);
 
 			status = efi.get_wakeup_time((efi_bool_t *)&enabled, (efi_bool_t *)&pending, &eft);
 
 			spin_unlock_irqrestore(&efi_rtc_lock,flags);
+			unlock_kernel();
 
 			if (status != EFI_SUCCESS) return -EINVAL;
 
@@ -256,7 +261,7 @@ efi_rtc_ioctl(struct inode *inode, struct file *file, unsigned int cmd,
 			return copy_to_user(&ewp->time, &wtime,
 					    sizeof(struct rtc_time)) ? -EFAULT : 0;
 	}
-	return -EINVAL;
+	return -ENOTTY;
 }
 
 /*
@@ -265,8 +270,7 @@ efi_rtc_ioctl(struct inode *inode, struct file *file, unsigned int cmd,
  *	up things on a close.
  */
 
-static int
-efi_rtc_open(struct inode *inode, struct file *file)
+static int efi_rtc_open(struct inode *inode, struct file *file)
 {
 	/*
 	 * nothing special to do here
@@ -277,8 +281,7 @@ efi_rtc_open(struct inode *inode, struct file *file)
 	return 0;
 }
 
-static int
-efi_rtc_close(struct inode *inode, struct file *file)
+static int efi_rtc_close(struct inode *inode, struct file *file)
 {
 	return 0;
 }
@@ -289,13 +292,12 @@ efi_rtc_close(struct inode *inode, struct file *file)
 
 static const struct file_operations efi_rtc_fops = {
 	.owner		= THIS_MODULE,
-	.ioctl		= efi_rtc_ioctl,
+	.unlocked_ioctl	= efi_rtc_ioctl,
 	.open		= efi_rtc_open,
 	.release	= efi_rtc_close,
 };
 
-static struct miscdevice efi_rtc_dev=
-{
+static struct miscdevice efi_rtc_dev= {
 	EFI_RTC_MINOR,
 	"efirtc",
 	&efi_rtc_fops
diff --git a/drivers/char/hpet.c b/drivers/char/hpet.c
index fb0a85a1eb36..b3f5dbc6d880 100644
--- a/drivers/char/hpet.c
+++ b/drivers/char/hpet.c
@@ -623,6 +623,7 @@ static inline int hpet_tpcheck(struct hpet_task *tp)
 	return -ENXIO;
 }
 
+#if 0
 int hpet_unregister(struct hpet_task *tp)
 {
 	struct hpet_dev *devp;
@@ -652,6 +653,7 @@ int hpet_unregister(struct hpet_task *tp)
 
 	return 0;
 }
+#endif  /*  0  */
 
 static ctl_table hpet_table[] = {
 	{
diff --git a/drivers/char/hvc_console.c b/drivers/char/hvc_console.c
index 2f9759d625cc..fd64137b1ab9 100644
--- a/drivers/char/hvc_console.c
+++ b/drivers/char/hvc_console.c
@@ -27,7 +27,6 @@
 #include <linux/init.h>
 #include <linux/kbd_kern.h>
 #include <linux/kernel.h>
-#include <linux/kref.h>
 #include <linux/kthread.h>
 #include <linux/list.h>
 #include <linux/module.h>
@@ -75,23 +74,6 @@ static int hvc_init(void);
 static int sysrq_pressed;
 #endif
 
-struct hvc_struct {
-	spinlock_t lock;
-	int index;
-	struct tty_struct *tty;
-	unsigned int count;
-	int do_wakeup;
-	char *outbuf;
-	int outbuf_size;
-	int n_outbuf;
-	uint32_t vtermno;
-	struct hv_ops *ops;
-	int irq_requested;
-	int irq;
-	struct list_head next;
-	struct kref kref; /* ref count & hvc_struct lifetime */
-};
-
 /* dynamic list of hvc_struct instances */
 static LIST_HEAD(hvc_structs);
 
@@ -298,27 +280,15 @@ int hvc_instantiate(uint32_t vtermno, int index, struct hv_ops *ops)
 
 	return 0;
 }
+EXPORT_SYMBOL_GPL(hvc_instantiate);
 
 /* Wake the sleeping khvcd */
-static void hvc_kick(void)
+void hvc_kick(void)
 {
 	hvc_kicked = 1;
 	wake_up_process(hvc_task);
 }
-
-static int hvc_poll(struct hvc_struct *hp);
-
-/*
- * NOTE: This API isn't used if the console adapter doesn't support interrupts.
- * In this case the console is poll driven.
- */
-static irqreturn_t hvc_handle_interrupt(int irq, void *dev_instance)
-{
-	/* if hvc_poll request a repoll, then kick the hvcd thread */
-	if (hvc_poll(dev_instance))
-		hvc_kick();
-	return IRQ_HANDLED;
-}
+EXPORT_SYMBOL_GPL(hvc_kick);
 
 static void hvc_unthrottle(struct tty_struct *tty)
 {
@@ -333,7 +303,6 @@ static int hvc_open(struct tty_struct *tty, struct file * filp)
 {
 	struct hvc_struct *hp;
 	unsigned long flags;
-	int irq = 0;
 	int rc = 0;
 
 	/* Auto increments kref reference if found. */
@@ -352,18 +321,14 @@ static int hvc_open(struct tty_struct *tty, struct file * filp)
 	tty->low_latency = 1; /* Makes flushes to ldisc synchronous. */
 
 	hp->tty = tty;
-	/* Save for request_irq outside of spin_lock. */
-	irq = hp->irq;
-	if (irq)
-		hp->irq_requested = 1;
 
 	spin_unlock_irqrestore(&hp->lock, flags);
-	/* check error, fallback to non-irq */
-	if (irq)
-		rc = request_irq(irq, hvc_handle_interrupt, IRQF_DISABLED, "hvc_console", hp);
+
+	if (hp->ops->notifier_add)
+		rc = hp->ops->notifier_add(hp, hp->data);
 
 	/*
-	 * If the request_irq() fails and we return an error.  The tty layer
+	 * If the notifier fails we return an error.  The tty layer
 	 * will call hvc_close() after a failed open but we don't want to clean
 	 * up there so we'll clean up here and clear out the previously set
 	 * tty fields and return the kref reference.
@@ -371,7 +336,6 @@ static int hvc_open(struct tty_struct *tty, struct file * filp)
 	if (rc) {
 		spin_lock_irqsave(&hp->lock, flags);
 		hp->tty = NULL;
-		hp->irq_requested = 0;
 		spin_unlock_irqrestore(&hp->lock, flags);
 		tty->driver_data = NULL;
 		kref_put(&hp->kref, destroy_hvc_struct);
@@ -386,7 +350,6 @@ static int hvc_open(struct tty_struct *tty, struct file * filp)
 static void hvc_close(struct tty_struct *tty, struct file * filp)
 {
 	struct hvc_struct *hp;
-	int irq = 0;
 	unsigned long flags;
 
 	if (tty_hung_up_p(filp))
@@ -404,9 +367,8 @@ static void hvc_close(struct tty_struct *tty, struct file * filp)
 	spin_lock_irqsave(&hp->lock, flags);
 
 	if (--hp->count == 0) {
-		if (hp->irq_requested)
-			irq = hp->irq;
-		hp->irq_requested = 0;
+		if (hp->ops->notifier_del)
+			hp->ops->notifier_del(hp, hp->data);
 
 		/* We are done with the tty pointer now. */
 		hp->tty = NULL;
@@ -418,10 +380,6 @@ static void hvc_close(struct tty_struct *tty, struct file * filp)
 		 * waking periodically to check chars_in_buffer().
 		 */
 		tty_wait_until_sent(tty, HVC_CLOSE_WAIT);
-
-		if (irq)
-			free_irq(irq, hp);
-
 	} else {
 		if (hp->count < 0)
 			printk(KERN_ERR "hvc_close %X: oops, count is %d\n",
@@ -436,7 +394,6 @@ static void hvc_hangup(struct tty_struct *tty)
 {
 	struct hvc_struct *hp = tty->driver_data;
 	unsigned long flags;
-	int irq = 0;
 	int temp_open_count;
 
 	if (!hp)
@@ -458,13 +415,12 @@ static void hvc_hangup(struct tty_struct *tty)
 	hp->count = 0;
 	hp->n_outbuf = 0;
 	hp->tty = NULL;
-	if (hp->irq_requested)
-		/* Saved for use outside of spin_lock. */
-		irq = hp->irq;
-	hp->irq_requested = 0;
+
+	if (hp->ops->notifier_del)
+			hp->ops->notifier_del(hp, hp->data);
+
 	spin_unlock_irqrestore(&hp->lock, flags);
-	if (irq)
-		free_irq(irq, hp);
+
 	while(temp_open_count) {
 		--temp_open_count;
 		kref_put(&hp->kref, destroy_hvc_struct);
@@ -575,7 +531,7 @@ static u32 timeout = MIN_TIMEOUT;
 #define HVC_POLL_READ	0x00000001
 #define HVC_POLL_WRITE	0x00000002
 
-static int hvc_poll(struct hvc_struct *hp)
+int hvc_poll(struct hvc_struct *hp)
 {
 	struct tty_struct *tty;
 	int i, n, poll_mask = 0;
@@ -602,10 +558,10 @@ static int hvc_poll(struct hvc_struct *hp)
 	if (test_bit(TTY_THROTTLED, &tty->flags))
 		goto throttled;
 
-	/* If we aren't interrupt driven and aren't throttled, we always
+	/* If we aren't notifier driven and aren't throttled, we always
 	 * request a reschedule
 	 */
-	if (hp->irq == 0)
+	if (!hp->irq_requested)
 		poll_mask |= HVC_POLL_READ;
 
 	/* Read data if any */
@@ -674,6 +630,7 @@ static int hvc_poll(struct hvc_struct *hp)
 
 	return poll_mask;
 }
+EXPORT_SYMBOL_GPL(hvc_poll);
 
 /*
  * This kthread is either polling or interrupt driven.  This is determined by
@@ -733,7 +690,7 @@ static const struct tty_operations hvc_ops = {
 	.chars_in_buffer = hvc_chars_in_buffer,
 };
 
-struct hvc_struct __devinit *hvc_alloc(uint32_t vtermno, int irq,
+struct hvc_struct __devinit *hvc_alloc(uint32_t vtermno, int data,
 					struct hv_ops *ops, int outbuf_size)
 {
 	struct hvc_struct *hp;
@@ -754,7 +711,7 @@ struct hvc_struct __devinit *hvc_alloc(uint32_t vtermno, int irq,
 	memset(hp, 0x00, sizeof(*hp));
 
 	hp->vtermno = vtermno;
-	hp->irq = irq;
+	hp->data = data;
 	hp->ops = ops;
 	hp->outbuf_size = outbuf_size;
 	hp->outbuf = &((char *)hp)[ALIGN(sizeof(*hp), sizeof(long))];
@@ -784,6 +741,7 @@ struct hvc_struct __devinit *hvc_alloc(uint32_t vtermno, int irq,
 
 	return hp;
 }
+EXPORT_SYMBOL_GPL(hvc_alloc);
 
 int __devexit hvc_remove(struct hvc_struct *hp)
 {
diff --git a/drivers/char/hvc_console.h b/drivers/char/hvc_console.h
index 42ffb17e15df..9790201718ae 100644
--- a/drivers/char/hvc_console.h
+++ b/drivers/char/hvc_console.h
@@ -6,7 +6,7 @@
  * 	Ryan S. Arnold <rsa@us.ibm.com>
  *
  * hvc_console header information:
- *      moved here from include/asm-powerpc/hvconsole.h
+ *      moved here from arch/powerpc/include/asm/hvconsole.h
  *      and drivers/char/hvc_console.c
  *
  * This program is free software; you can redistribute it and/or modify
@@ -26,6 +26,7 @@
 
 #ifndef HVC_CONSOLE_H
 #define HVC_CONSOLE_H
+#include <linux/kref.h>
 
 /*
  * This is the max number of console adapters that can/will be found as
@@ -42,24 +43,50 @@
  */
 #define HVC_ALLOC_TTY_ADAPTERS	8
 
+struct hvc_struct {
+	spinlock_t lock;
+	int index;
+	struct tty_struct *tty;
+	unsigned int count;
+	int do_wakeup;
+	char *outbuf;
+	int outbuf_size;
+	int n_outbuf;
+	uint32_t vtermno;
+	struct hv_ops *ops;
+	int irq_requested;
+	int data;
+	struct list_head next;
+	struct kref kref; /* ref count & hvc_struct lifetime */
+};
 
 /* implemented by a low level driver */
 struct hv_ops {
 	int (*get_chars)(uint32_t vtermno, char *buf, int count);
 	int (*put_chars)(uint32_t vtermno, const char *buf, int count);
-};
 
-struct hvc_struct;
+	/* Callbacks for notification. Called in open and close */
+	int (*notifier_add)(struct hvc_struct *hp, int irq);
+	void (*notifier_del)(struct hvc_struct *hp, int irq);
+};
 
 /* Register a vterm and a slot index for use as a console (console_init) */
 extern int hvc_instantiate(uint32_t vtermno, int index, struct hv_ops *ops);
 
 /* register a vterm for hvc tty operation (module_init or hotplug add) */
-extern struct hvc_struct * __devinit hvc_alloc(uint32_t vtermno, int irq,
+extern struct hvc_struct * __devinit hvc_alloc(uint32_t vtermno, int data,
 				struct hv_ops *ops, int outbuf_size);
-/* remove a vterm from hvc tty operation (modele_exit or hotplug remove) */
+/* remove a vterm from hvc tty operation (module_exit or hotplug remove) */
 extern int __devexit hvc_remove(struct hvc_struct *hp);
 
+/* data available */
+int hvc_poll(struct hvc_struct *hp);
+void hvc_kick(void);
+
+/* default notifier for irq based notification */
+extern int notifier_add_irq(struct hvc_struct *hp, int data);
+extern void notifier_del_irq(struct hvc_struct *hp, int data);
+
 
 #if defined(CONFIG_XMON) && defined(CONFIG_SMP)
 #include <asm/xmon.h>
diff --git a/drivers/char/hvc_irq.c b/drivers/char/hvc_irq.c
new file mode 100644
index 000000000000..73a59cdb8947
--- /dev/null
+++ b/drivers/char/hvc_irq.c
@@ -0,0 +1,44 @@
+/*
+ * Copyright IBM Corp. 2001,2008
+ *
+ * This file contains the IRQ specific code for hvc_console
+ *
+ */
+
+#include <linux/interrupt.h>
+
+#include "hvc_console.h"
+
+static irqreturn_t hvc_handle_interrupt(int irq, void *dev_instance)
+{
+	/* if hvc_poll request a repoll, then kick the hvcd thread */
+	if (hvc_poll(dev_instance))
+		hvc_kick();
+	return IRQ_HANDLED;
+}
+
+/*
+ * For IRQ based systems these callbacks can be used
+ */
+int notifier_add_irq(struct hvc_struct *hp, int irq)
+{
+	int rc;
+
+	if (!irq) {
+		hp->irq_requested = 0;
+		return 0;
+	}
+	rc = request_irq(irq, hvc_handle_interrupt, IRQF_DISABLED,
+			   "hvc_console", hp);
+	if (!rc)
+		hp->irq_requested = 1;
+	return rc;
+}
+
+void notifier_del_irq(struct hvc_struct *hp, int irq)
+{
+	if (!irq)
+		return;
+	free_irq(irq, hp);
+	hp->irq_requested = 0;
+}
diff --git a/drivers/char/hvc_iseries.c b/drivers/char/hvc_iseries.c
index a08f8f981c11..b71c610fe5ae 100644
--- a/drivers/char/hvc_iseries.c
+++ b/drivers/char/hvc_iseries.c
@@ -200,6 +200,8 @@ done:
 static struct hv_ops hvc_get_put_ops = {
 	.get_chars = get_chars,
 	.put_chars = put_chars,
+	.notifier_add = notifier_add_irq,
+	.notifier_del = notifier_del_irq,
 };
 
 static int __devinit hvc_vio_probe(struct vio_dev *vdev,
diff --git a/drivers/char/hvc_vio.c b/drivers/char/hvc_vio.c
index 79711aa4b41d..93f3840c1682 100644
--- a/drivers/char/hvc_vio.c
+++ b/drivers/char/hvc_vio.c
@@ -80,6 +80,8 @@ static int filtered_get_chars(uint32_t vtermno, char *buf, int count)
 static struct hv_ops hvc_get_put_ops = {
 	.get_chars = filtered_get_chars,
 	.put_chars = hvc_put_chars,
+	.notifier_add = notifier_add_irq,
+	.notifier_del = notifier_del_irq,
 };
 
 static int __devinit hvc_vio_probe(struct vio_dev *vdev,
diff --git a/drivers/char/hvc_xen.c b/drivers/char/hvc_xen.c
index db2ae4216279..6b70aa66a587 100644
--- a/drivers/char/hvc_xen.c
+++ b/drivers/char/hvc_xen.c
@@ -100,6 +100,8 @@ static int read_console(uint32_t vtermno, char *buf, int len)
 static struct hv_ops hvc_ops = {
 	.get_chars = read_console,
 	.put_chars = write_console,
+	.notifier_add = notifier_add_irq,
+	.notifier_del = notifier_del_irq,
 };
 
 static int __init xen_init(void)
diff --git a/drivers/char/hvcs.c b/drivers/char/hvcs.c
index 786d518e9477..473d9b14439a 100644
--- a/drivers/char/hvcs.c
+++ b/drivers/char/hvcs.c
@@ -114,7 +114,7 @@
  * the hvcs_final_close() function in order to get it out of the spinlock.
  * Rearranged hvcs_close().  Cleaned up some printks and did some housekeeping
  * on the changelog.  Removed local CLC_LENGTH and used HVCS_CLC_LENGTH from
- * include/asm-powerpc/hvcserver.h 
+ * arch/powerepc/include/asm/hvcserver.h
  *
  * 1.3.2 -> 1.3.3 Replaced yield() in hvcs_close() with tty_wait_until_sent() to
  * prevent possible lockup with realtime scheduling as similarily pointed out by
diff --git a/drivers/char/hw_random/intel-rng.c b/drivers/char/hw_random/intel-rng.c
index 27fdc0866496..8a2fce0756ec 100644
--- a/drivers/char/hw_random/intel-rng.c
+++ b/drivers/char/hw_random/intel-rng.c
@@ -241,7 +241,7 @@ static int __init intel_rng_hw_init(void *_intel_rng_hw)
 	struct intel_rng_hw *intel_rng_hw = _intel_rng_hw;
 	u8 mfc, dvc;
 
-	/* interrupts disabled in stop_machine_run call */
+	/* interrupts disabled in stop_machine call */
 
 	if (!(intel_rng_hw->fwh_dec_en1_val & FWH_F8_EN_MASK))
 		pci_write_config_byte(intel_rng_hw->dev,
@@ -365,10 +365,10 @@ static int __init mod_init(void)
 	 * location with the Read ID command, all activity on the system
 	 * must be stopped until the state is back to normal.
 	 *
-	 * Use stop_machine_run because IPIs can be blocked by disabling
+	 * Use stop_machine because IPIs can be blocked by disabling
 	 * interrupts.
 	 */
-	err = stop_machine_run(intel_rng_hw_init, intel_rng_hw, NR_CPUS);
+	err = stop_machine(intel_rng_hw_init, intel_rng_hw, NULL);
 	pci_dev_put(dev);
 	iounmap(intel_rng_hw->mem);
 	kfree(intel_rng_hw);
diff --git a/drivers/char/hw_random/ixp4xx-rng.c b/drivers/char/hw_random/ixp4xx-rng.c
index bab43ca32ac1..263567f5f392 100644
--- a/drivers/char/hw_random/ixp4xx-rng.c
+++ b/drivers/char/hw_random/ixp4xx-rng.c
@@ -23,7 +23,7 @@
 #include <linux/hw_random.h>
 
 #include <asm/io.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 
 
 static int ixp4xx_rng_data_read(struct hwrng *rng, u32 *buffer)
diff --git a/drivers/char/hw_random/via-rng.c b/drivers/char/hw_random/via-rng.c
index f7feae4ebb5e..128202e18fc9 100644
--- a/drivers/char/hw_random/via-rng.c
+++ b/drivers/char/hw_random/via-rng.c
@@ -31,6 +31,7 @@
 #include <asm/io.h>
 #include <asm/msr.h>
 #include <asm/cpufeature.h>
+#include <asm/i387.h>
 
 
 #define PFX	KBUILD_MODNAME ": "
@@ -67,16 +68,23 @@ enum {
  * Another possible performance boost may come from simply buffering
  * until we have 4 bytes, thus returning a u32 at a time,
  * instead of the current u8-at-a-time.
+ *
+ * Padlock instructions can generate a spurious DNA fault, so
+ * we have to call them in the context of irq_ts_save/restore()
  */
 
 static inline u32 xstore(u32 *addr, u32 edx_in)
 {
 	u32 eax_out;
+	int ts_state;
+
+	ts_state = irq_ts_save();
 
 	asm(".byte 0x0F,0xA7,0xC0 /* xstore %%edi (addr=%0) */"
 		:"=m"(*addr), "=a"(eax_out)
 		:"D"(addr), "d"(edx_in));
 
+	irq_ts_restore(ts_state);
 	return eax_out;
 }
 
diff --git a/drivers/char/ip2/ip2main.c b/drivers/char/ip2/ip2main.c
index 9cb48fcd316c..689f9dcd3b86 100644
--- a/drivers/char/ip2/ip2main.c
+++ b/drivers/char/ip2/ip2main.c
@@ -203,7 +203,7 @@ static int set_serial_info(i2ChanStrPtr, struct serial_struct __user *);
 
 static ssize_t ip2_ipl_read(struct file *, char __user *, size_t, loff_t *);
 static ssize_t ip2_ipl_write(struct file *, const char __user *, size_t, loff_t *);
-static int ip2_ipl_ioctl(struct inode *, struct file *, UINT, ULONG);
+static long ip2_ipl_ioctl(struct file *, UINT, ULONG);
 static int ip2_ipl_open(struct inode *, struct file *);
 
 static int DumpTraceBuffer(char __user *, int);
@@ -236,7 +236,7 @@ static const struct file_operations ip2_ipl = {
 	.owner		= THIS_MODULE,
 	.read		= ip2_ipl_read,
 	.write		= ip2_ipl_write,
-	.ioctl		= ip2_ipl_ioctl,
+	.unlocked_ioctl	= ip2_ipl_ioctl,
 	.open		= ip2_ipl_open,
 }; 
 
@@ -2845,10 +2845,10 @@ ip2_ipl_write(struct file *pFile, const char __user *pData, size_t count, loff_t
 /*                                                                            */
 /*                                                                            */
 /******************************************************************************/
-static int
-ip2_ipl_ioctl ( struct inode *pInode, struct file *pFile, UINT cmd, ULONG arg )
+static long
+ip2_ipl_ioctl (struct file *pFile, UINT cmd, ULONG arg )
 {
-	unsigned int iplminor = iminor(pInode);
+	unsigned int iplminor = iminor(pFile->f_path.dentry->d_inode);
 	int rc = 0;
 	void __user *argp = (void __user *)arg;
 	ULONG __user *pIndex = argp;
@@ -2859,6 +2859,8 @@ ip2_ipl_ioctl ( struct inode *pInode, struct file *pFile, UINT cmd, ULONG arg )
 	printk (KERN_DEBUG "IP2IPL: ioctl cmd %d, arg %ld\n", cmd, arg );
 #endif
 
+	lock_kernel();
+
 	switch ( iplminor ) {
 	case 0:	    // IPL device
 		rc = -EINVAL;
@@ -2919,6 +2921,7 @@ ip2_ipl_ioctl ( struct inode *pInode, struct file *pFile, UINT cmd, ULONG arg )
 		rc = -ENODEV;
 		break;
 	}
+	unlock_kernel();
 	return rc;
 }
 
diff --git a/drivers/char/ipmi/ipmi_si_intf.c b/drivers/char/ipmi/ipmi_si_intf.c
index 192688344ed2..8e8afb6141f9 100644
--- a/drivers/char/ipmi/ipmi_si_intf.c
+++ b/drivers/char/ipmi/ipmi_si_intf.c
@@ -66,8 +66,8 @@
 #include <linux/ctype.h>
 
 #ifdef CONFIG_PPC_OF
-#include <asm/of_device.h>
-#include <asm/of_platform.h>
+#include <linux/of_device.h>
+#include <linux/of_platform.h>
 #endif
 
 #define PFX "ipmi_si: "
@@ -2695,15 +2695,13 @@ static __devinit void default_find_bmc(void)
 	for (i = 0; ; i++) {
 		if (!ipmi_defaults[i].port)
 			break;
-
-		info = kzalloc(sizeof(*info), GFP_KERNEL);
-		if (!info)
-			return;
-
 #ifdef CONFIG_PPC_MERGE
 		if (check_legacy_ioport(ipmi_defaults[i].port))
 			continue;
 #endif
+		info = kzalloc(sizeof(*info), GFP_KERNEL);
+		if (!info)
+			return;
 
 		info->addr_source = NULL;
 
diff --git a/drivers/char/mwave/mwavedd.c b/drivers/char/mwave/mwavedd.c
index 50243fcd87e8..4f8d67fed292 100644
--- a/drivers/char/mwave/mwavedd.c
+++ b/drivers/char/mwave/mwavedd.c
@@ -86,8 +86,8 @@ module_param(mwave_uart_io, int, 0);
 
 static int mwave_open(struct inode *inode, struct file *file);
 static int mwave_close(struct inode *inode, struct file *file);
-static int mwave_ioctl(struct inode *inode, struct file *filp,
-                       unsigned int iocmd, unsigned long ioarg);
+static long mwave_ioctl(struct file *filp, unsigned int iocmd,
+							unsigned long ioarg);
 
 MWAVE_DEVICE_DATA mwave_s_mdd;
 
@@ -119,16 +119,16 @@ static int mwave_close(struct inode *inode, struct file *file)
 	return retval;
 }
 
-static int mwave_ioctl(struct inode *inode, struct file *file,
-                       unsigned int iocmd, unsigned long ioarg)
+static long mwave_ioctl(struct file *file, unsigned int iocmd,
+							unsigned long ioarg)
 {
 	unsigned int retval = 0;
 	pMWAVE_DEVICE_DATA pDrvData = &mwave_s_mdd;
 	void __user *arg = (void __user *)ioarg;
 
-	PRINTK_5(TRACE_MWAVE,
-		"mwavedd::mwave_ioctl, entry inode %p file %p cmd %x arg %x\n",
-		 inode,  file, iocmd, (int) ioarg);
+	PRINTK_4(TRACE_MWAVE,
+		"mwavedd::mwave_ioctl, entry file %p cmd %x arg %x\n",
+		file, iocmd, (int) ioarg);
 
 	switch (iocmd) {
 
@@ -136,7 +136,9 @@ static int mwave_ioctl(struct inode *inode, struct file *file,
 			PRINTK_1(TRACE_MWAVE,
 				"mwavedd::mwave_ioctl, IOCTL_MW_RESET"
 				" calling tp3780I_ResetDSP\n");
+			lock_kernel();
 			retval = tp3780I_ResetDSP(&pDrvData->rBDData);
+			unlock_kernel();
 			PRINTK_2(TRACE_MWAVE,
 				"mwavedd::mwave_ioctl, IOCTL_MW_RESET"
 				" retval %x from tp3780I_ResetDSP\n",
@@ -147,7 +149,9 @@ static int mwave_ioctl(struct inode *inode, struct file *file,
 			PRINTK_1(TRACE_MWAVE,
 				"mwavedd::mwave_ioctl, IOCTL_MW_RUN"
 				" calling tp3780I_StartDSP\n");
+			lock_kernel();
 			retval = tp3780I_StartDSP(&pDrvData->rBDData);
+			unlock_kernel();
 			PRINTK_2(TRACE_MWAVE,
 				"mwavedd::mwave_ioctl, IOCTL_MW_RUN"
 				" retval %x from tp3780I_StartDSP\n",
@@ -161,8 +165,10 @@ static int mwave_ioctl(struct inode *inode, struct file *file,
 				"mwavedd::mwave_ioctl,"
 				" IOCTL_MW_DSP_ABILITIES calling"
 				" tp3780I_QueryAbilities\n");
+			lock_kernel();
 			retval = tp3780I_QueryAbilities(&pDrvData->rBDData,
 					&rAbilities);
+			unlock_kernel();
 			PRINTK_2(TRACE_MWAVE,
 				"mwavedd::mwave_ioctl, IOCTL_MW_DSP_ABILITIES"
 				" retval %x from tp3780I_QueryAbilities\n",
@@ -193,11 +199,13 @@ static int mwave_ioctl(struct inode *inode, struct file *file,
 				"mwavedd::mwave_ioctl IOCTL_MW_READ_DATA,"
 				" size %lx, ioarg %lx pusBuffer %p\n",
 				rReadData.ulDataLength, ioarg, pusBuffer);
+			lock_kernel();
 			retval = tp3780I_ReadWriteDspDStore(&pDrvData->rBDData,
 					iocmd,
 					pusBuffer,
 					rReadData.ulDataLength,
 					rReadData.usDspAddress);
+			unlock_kernel();
 		}
 			break;
 	
@@ -215,10 +223,12 @@ static int mwave_ioctl(struct inode *inode, struct file *file,
 				" size %lx, ioarg %lx pusBuffer %p\n",
 				rReadData.ulDataLength / 2, ioarg,
 				pusBuffer);
+			lock_kernel();
 			retval = tp3780I_ReadWriteDspDStore(&pDrvData->rBDData,
 				iocmd, pusBuffer,
 				rReadData.ulDataLength / 2,
 				rReadData.usDspAddress);
+			unlock_kernel();
 		}
 			break;
 	
@@ -236,10 +246,12 @@ static int mwave_ioctl(struct inode *inode, struct file *file,
 				" size %lx, ioarg %lx pusBuffer %p\n",
 				rWriteData.ulDataLength, ioarg,
 				pusBuffer);
+			lock_kernel();
 			retval = tp3780I_ReadWriteDspDStore(&pDrvData->rBDData,
 					iocmd, pusBuffer,
 					rWriteData.ulDataLength,
 					rWriteData.usDspAddress);
+			unlock_kernel();
 		}
 			break;
 	
@@ -257,10 +269,12 @@ static int mwave_ioctl(struct inode *inode, struct file *file,
 				" size %lx, ioarg %lx pusBuffer %p\n",
 				rWriteData.ulDataLength, ioarg,
 				pusBuffer);
+			lock_kernel();
 			retval = tp3780I_ReadWriteDspIStore(&pDrvData->rBDData,
 					iocmd, pusBuffer,
 					rWriteData.ulDataLength,
 					rWriteData.usDspAddress);
+			unlock_kernel();
 		}
 			break;
 	
@@ -281,8 +295,10 @@ static int mwave_ioctl(struct inode *inode, struct file *file,
 						ipcnum);
 				return -EINVAL;
 			}
+			lock_kernel();
 			pDrvData->IPCs[ipcnum].bIsHere = FALSE;
 			pDrvData->IPCs[ipcnum].bIsEnabled = TRUE;
+			unlock_kernel();
 	
 			PRINTK_2(TRACE_MWAVE,
 				"mwavedd::mwave_ioctl IOCTL_MW_REGISTER_IPC"
@@ -307,6 +323,7 @@ static int mwave_ioctl(struct inode *inode, struct file *file,
 				return -EINVAL;
 			}
 	
+			lock_kernel();
 			if (pDrvData->IPCs[ipcnum].bIsEnabled == TRUE) {
 				DECLARE_WAITQUEUE(wait, current);
 
@@ -347,6 +364,7 @@ static int mwave_ioctl(struct inode *inode, struct file *file,
 					" processing\n",
 					ipcnum);
 			}
+			unlock_kernel();
 		}
 			break;
 	
@@ -365,19 +383,18 @@ static int mwave_ioctl(struct inode *inode, struct file *file,
 						ipcnum);
 				return -EINVAL;
 			}
+			lock_kernel();
 			if (pDrvData->IPCs[ipcnum].bIsEnabled == TRUE) {
 				pDrvData->IPCs[ipcnum].bIsEnabled = FALSE;
 				if (pDrvData->IPCs[ipcnum].bIsHere == TRUE) {
 					wake_up_interruptible(&pDrvData->IPCs[ipcnum].ipc_wait_queue);
 				}
 			}
+			unlock_kernel();
 		}
 			break;
 	
 		default:
-			PRINTK_ERROR(KERN_ERR_MWAVE "mwavedd::mwave_ioctl:"
-					" Error: Unrecognized iocmd %x\n",
-					iocmd);
 			return -ENOTTY;
 			break;
 	} /* switch */
@@ -460,7 +477,7 @@ static const struct file_operations mwave_fops = {
 	.owner		= THIS_MODULE,
 	.read		= mwave_read,
 	.write		= mwave_write,
-	.ioctl		= mwave_ioctl,
+	.unlocked_ioctl	= mwave_ioctl,
 	.open		= mwave_open,
 	.release	= mwave_close
 };
diff --git a/drivers/char/mwave/mwavedd.h b/drivers/char/mwave/mwavedd.h
index 8eca61e0a19c..7e0d530e2e07 100644
--- a/drivers/char/mwave/mwavedd.h
+++ b/drivers/char/mwave/mwavedd.h
@@ -147,4 +147,6 @@ typedef struct _MWAVE_DEVICE_DATA {
 
 } MWAVE_DEVICE_DATA, *pMWAVE_DEVICE_DATA;
 
+extern MWAVE_DEVICE_DATA mwave_s_mdd;
+
 #endif
diff --git a/drivers/char/mwave/tp3780i.c b/drivers/char/mwave/tp3780i.c
index f282976daaac..c68969708068 100644
--- a/drivers/char/mwave/tp3780i.c
+++ b/drivers/char/mwave/tp3780i.c
@@ -57,8 +57,6 @@
 #include "3780i.h"
 #include "mwavepub.h"
 
-extern MWAVE_DEVICE_DATA mwave_s_mdd;
-
 static unsigned short s_ausThinkpadIrqToField[16] =
 	{ 0xFFFF, 0xFFFF, 0xFFFF, 0x0001, 0x0002, 0x0003, 0xFFFF, 0x0004,
 	0xFFFF, 0xFFFF, 0x0005, 0x0006, 0xFFFF, 0xFFFF, 0xFFFF, 0x0007 };
diff --git a/drivers/char/mxser.c b/drivers/char/mxser.c
index 4c756bbba948..b638403e8e9c 100644
--- a/drivers/char/mxser.c
+++ b/drivers/char/mxser.c
@@ -16,7 +16,6 @@
  *	Fed through a cleanup, indent and remove of non 2.6 code by Alan Cox
  *	<alan@redhat.com>. The original 1.8 code is available on www.moxa.com.
  *	- Fixed x86_64 cleanness
- *	- Fixed sleep with spinlock held in mxser_send_break
  */
 
 #include <linux/module.h>
@@ -49,18 +48,12 @@
 
 #define	MXSER_VERSION	"2.0.4"		/* 1.12 */
 #define	MXSERMAJOR	 174
-#define	MXSERCUMAJOR	 175
 
 #define MXSER_BOARDS		4	/* Max. boards */
 #define MXSER_PORTS_PER_BOARD	8	/* Max. ports per board */
 #define MXSER_PORTS		(MXSER_BOARDS * MXSER_PORTS_PER_BOARD)
 #define MXSER_ISR_PASS_LIMIT	100
 
-#define	MXSER_ERR_IOADDR	-1
-#define	MXSER_ERR_IRQ		-2
-#define	MXSER_ERR_IRQ_CONFLIT	-3
-#define	MXSER_ERR_VECTOR	-4
-
 /*CheckIsMoxaMust return value*/
 #define MOXA_OTHER_UART		0x00
 #define MOXA_MUST_MU150_HWID	0x01
@@ -179,14 +172,15 @@ static struct pci_device_id mxser_pcibrds[] = {
 };
 MODULE_DEVICE_TABLE(pci, mxser_pcibrds);
 
-static int ioaddr[MXSER_BOARDS] = { 0, 0, 0, 0 };
+static unsigned long ioaddr[MXSER_BOARDS];
 static int ttymajor = MXSERMAJOR;
 
 /* Variables for insmod */
 
 MODULE_AUTHOR("Casper Yang");
 MODULE_DESCRIPTION("MOXA Smartio/Industio Family Multiport Board Device Driver");
-module_param_array(ioaddr, int, NULL, 0);
+module_param_array(ioaddr, ulong, NULL, 0);
+MODULE_PARM_DESC(ioaddr, "ISA io addresses to look for a moxa board");
 module_param(ttymajor, int, 0);
 MODULE_LICENSE("GPL");
 
@@ -196,7 +190,6 @@ struct mxser_log {
 	unsigned long txcnt[MXSER_PORTS];
 };
 
-
 struct mxser_mon {
 	unsigned long rxcnt;
 	unsigned long txcnt;
@@ -287,19 +280,9 @@ struct mxser_mstatus {
 	int dcd;
 };
 
-static struct mxser_mstatus GMStatus[MXSER_PORTS];
-
-static int mxserBoardCAP[MXSER_BOARDS] = {
-	0, 0, 0, 0
-	/*  0x180, 0x280, 0x200, 0x320 */
-};
-
 static struct mxser_board mxser_boards[MXSER_BOARDS];
 static struct tty_driver *mxvar_sdriver;
 static struct mxser_log mxvar_log;
-static int mxvar_diagflag;
-static unsigned char mxser_msr[MXSER_PORTS + 1];
-static struct mxser_mon_ext mon_data_ext;
 static int mxser_set_baud_method[MXSER_PORTS + 1];
 
 static void mxser_enable_must_enchance_mode(unsigned long baseio)
@@ -543,6 +526,7 @@ static void process_txrx_fifo(struct mxser_port *info)
 
 static unsigned char mxser_get_msr(int baseaddr, int mode, int port)
 {
+	static unsigned char mxser_msr[MXSER_PORTS + 1];
 	unsigned char status = 0;
 
 	status = inb(baseaddr + UART_MSR);
@@ -1319,13 +1303,9 @@ static void mxser_flush_chars(struct tty_struct *tty)
 	struct mxser_port *info = tty->driver_data;
 	unsigned long flags;
 
-	if (info->xmit_cnt <= 0 ||
-			tty->stopped ||
-			!info->port.xmit_buf ||
-			(tty->hw_stopped &&
-			 (info->type != PORT_16550A) &&
-			 (!info->board->chip_flag)
-			))
+	if (info->xmit_cnt <= 0 || tty->stopped || !info->port.xmit_buf ||
+			(tty->hw_stopped && info->type != PORT_16550A &&
+			 !info->board->chip_flag))
 		return;
 
 	spin_lock_irqsave(&info->slock, flags);
@@ -1343,9 +1323,7 @@ static int mxser_write_room(struct tty_struct *tty)
 	int ret;
 
 	ret = SERIAL_XMIT_SIZE - info->xmit_cnt - 1;
-	if (ret < 0)
-		ret = 0;
-	return ret;
+	return ret < 0 ? 0 : ret;
 }
 
 static int mxser_chars_in_buffer(struct tty_struct *tty)
@@ -1634,6 +1612,10 @@ static int mxser_ioctl_special(unsigned int cmd, void __user *argp)
 
 	switch (cmd) {
 	case MOXA_GET_MAJOR:
+		if (printk_ratelimit())
+			printk(KERN_WARNING "mxser: '%s' uses deprecated ioctl "
+					"%x (GET_MAJOR), fix your userspace\n",
+					current->comm, cmd);
 		return put_user(ttymajor, (int __user *)argp);
 
 	case MOXA_CHKPORTENABLE:
@@ -1651,62 +1633,60 @@ static int mxser_ioctl_special(unsigned int cmd, void __user *argp)
 			ret = -EFAULT;
 		unlock_kernel();
 		return ret;
-	case MOXA_GETMSTATUS:
+	case MOXA_GETMSTATUS: {
+		struct mxser_mstatus ms, __user *msu = argp;
 		lock_kernel();
 		for (i = 0; i < MXSER_BOARDS; i++)
 			for (j = 0; j < MXSER_PORTS_PER_BOARD; j++) {
 				port = &mxser_boards[i].ports[j];
+				memset(&ms, 0, sizeof(ms));
 
-				GMStatus[i].ri = 0;
-				if (!port->ioaddr) {
-					GMStatus[i].dcd = 0;
-					GMStatus[i].dsr = 0;
-					GMStatus[i].cts = 0;
-					continue;
-				}
+				if (!port->ioaddr)
+					goto copy;
 
 				if (!port->port.tty || !port->port.tty->termios)
-					GMStatus[i].cflag =
-						port->normal_termios.c_cflag;
+					ms.cflag = port->normal_termios.c_cflag;
 				else
-					GMStatus[i].cflag =
-						port->port.tty->termios->c_cflag;
+					ms.cflag = port->port.tty->termios->c_cflag;
 
 				status = inb(port->ioaddr + UART_MSR);
-				if (status & 0x80 /*UART_MSR_DCD */ )
-					GMStatus[i].dcd = 1;
-				else
-					GMStatus[i].dcd = 0;
-
-				if (status & 0x20 /*UART_MSR_DSR */ )
-					GMStatus[i].dsr = 1;
-				else
-					GMStatus[i].dsr = 0;
-
-
-				if (status & 0x10 /*UART_MSR_CTS */ )
-					GMStatus[i].cts = 1;
-				else
-					GMStatus[i].cts = 0;
+				if (status & UART_MSR_DCD)
+					ms.dcd = 1;
+				if (status & UART_MSR_DSR)
+					ms.dsr = 1;
+				if (status & UART_MSR_CTS)
+					ms.cts = 1;
+			copy:
+				if (copy_to_user(msu, &ms, sizeof(ms))) {
+					unlock_kernel();
+					return -EFAULT;
+				}
+				msu++;
 			}
 		unlock_kernel();
-		if (copy_to_user(argp, GMStatus,
-				sizeof(struct mxser_mstatus) * MXSER_PORTS))
-			return -EFAULT;
 		return 0;
+	}
 	case MOXA_ASPP_MON_EXT: {
-		int p, shiftbit;
-		unsigned long opmode;
-		unsigned cflag, iflag;
+		struct mxser_mon_ext *me; /* it's 2k, stack unfriendly */
+		unsigned int cflag, iflag, p;
+		u8 opmode;
+
+		me = kzalloc(sizeof(*me), GFP_KERNEL);
+		if (!me)
+			return -ENOMEM;
 
 		lock_kernel();
-		for (i = 0; i < MXSER_BOARDS; i++) {
-			for (j = 0; j < MXSER_PORTS_PER_BOARD; j++) {
+		for (i = 0, p = 0; i < MXSER_BOARDS; i++) {
+			for (j = 0; j < MXSER_PORTS_PER_BOARD; j++, p++) {
+				if (p >= ARRAY_SIZE(me->rx_cnt)) {
+					i = MXSER_BOARDS;
+					break;
+				}
 				port = &mxser_boards[i].ports[j];
 				if (!port->ioaddr)
 					continue;
 
-				status = mxser_get_msr(port->ioaddr, 0, i);
+				status = mxser_get_msr(port->ioaddr, 0, p);
 
 				if (status & UART_MSR_TERI)
 					port->icount.rng++;
@@ -1718,16 +1698,13 @@ static int mxser_ioctl_special(unsigned int cmd, void __user *argp)
 					port->icount.cts++;
 
 				port->mon_data.modem_status = status;
-				mon_data_ext.rx_cnt[i] = port->mon_data.rxcnt;
-				mon_data_ext.tx_cnt[i] = port->mon_data.txcnt;
-				mon_data_ext.up_rxcnt[i] =
-					port->mon_data.up_rxcnt;
-				mon_data_ext.up_txcnt[i] =
-					port->mon_data.up_txcnt;
-				mon_data_ext.modem_status[i] =
+				me->rx_cnt[p] = port->mon_data.rxcnt;
+				me->tx_cnt[p] = port->mon_data.txcnt;
+				me->up_rxcnt[p] = port->mon_data.up_rxcnt;
+				me->up_txcnt[p] = port->mon_data.up_txcnt;
+				me->modem_status[p] =
 					port->mon_data.modem_status;
-				mon_data_ext.baudrate[i] =
-					tty_get_baud_rate(port->port.tty);
+				me->baudrate[p] = tty_get_baud_rate(port->port.tty);
 
 				if (!port->port.tty || !port->port.tty->termios) {
 					cflag = port->normal_termios.c_cflag;
@@ -1737,40 +1714,31 @@ static int mxser_ioctl_special(unsigned int cmd, void __user *argp)
 					iflag = port->port.tty->termios->c_iflag;
 				}
 
-				mon_data_ext.databits[i] = cflag & CSIZE;
-
-				mon_data_ext.stopbits[i] = cflag & CSTOPB;
-
-				mon_data_ext.parity[i] =
-					cflag & (PARENB | PARODD | CMSPAR);
-
-				mon_data_ext.flowctrl[i] = 0x00;
+				me->databits[p] = cflag & CSIZE;
+				me->stopbits[p] = cflag & CSTOPB;
+				me->parity[p] = cflag & (PARENB | PARODD |
+						CMSPAR);
 
 				if (cflag & CRTSCTS)
-					mon_data_ext.flowctrl[i] |= 0x03;
+					me->flowctrl[p] |= 0x03;
 
 				if (iflag & (IXON | IXOFF))
-					mon_data_ext.flowctrl[i] |= 0x0C;
+					me->flowctrl[p] |= 0x0C;
 
 				if (port->type == PORT_16550A)
-					mon_data_ext.fifo[i] = 1;
-				else
-					mon_data_ext.fifo[i] = 0;
+					me->fifo[p] = 1;
 
-				p = i % 4;
-				shiftbit = p * 2;
-				opmode = inb(port->opmode_ioaddr) >> shiftbit;
+				opmode = inb(port->opmode_ioaddr) >>
+						((p % 4) * 2);
 				opmode &= OP_MODE_MASK;
-
-				mon_data_ext.iftype[i] = opmode;
-
+				me->iftype[p] = opmode;
 			}
 		}
 		unlock_kernel();
-		if (copy_to_user(argp, &mon_data_ext,
-					sizeof(mon_data_ext)))
-			return -EFAULT;
-		return 0;
+		if (copy_to_user(argp, me, sizeof(*me)))
+			ret = -EFAULT;
+		kfree(me);
+		return ret;
 	}
 	default:
 		return -ENOIOCTLCMD;
@@ -1804,7 +1772,6 @@ static int mxser_ioctl(struct tty_struct *tty, struct file *file,
 {
 	struct mxser_port *info = tty->driver_data;
 	struct async_icount cnow;
-	struct serial_icounter_struct __user *p_cuser;
 	unsigned long flags;
 	void __user *argp = (void __user *)arg;
 	int retval;
@@ -1884,30 +1851,26 @@ static int mxser_ioctl(struct tty_struct *tty, struct file *file,
 	 * NB: both 1->0 and 0->1 transitions are counted except for
 	 *     RI where only 0->1 is counted.
 	 */
-	case TIOCGICOUNT:
+	case TIOCGICOUNT: {
+		struct serial_icounter_struct icnt = { 0 };
 		spin_lock_irqsave(&info->slock, flags);
 		cnow = info->icount;
 		spin_unlock_irqrestore(&info->slock, flags);
-		p_cuser = argp;
-		if (put_user(cnow.frame, &p_cuser->frame))
-			return -EFAULT;
-		if (put_user(cnow.brk, &p_cuser->brk))
-			return -EFAULT;
-		if (put_user(cnow.overrun, &p_cuser->overrun))
-			return -EFAULT;
-		if (put_user(cnow.buf_overrun, &p_cuser->buf_overrun))
-			return -EFAULT;
-		if (put_user(cnow.parity, &p_cuser->parity))
-			return -EFAULT;
-		if (put_user(cnow.rx, &p_cuser->rx))
-			return -EFAULT;
-		if (put_user(cnow.tx, &p_cuser->tx))
-			return -EFAULT;
-		put_user(cnow.cts, &p_cuser->cts);
-		put_user(cnow.dsr, &p_cuser->dsr);
-		put_user(cnow.rng, &p_cuser->rng);
-		put_user(cnow.dcd, &p_cuser->dcd);
-		return 0;
+
+		icnt.frame = cnow.frame;
+		icnt.brk = cnow.brk;
+		icnt.overrun = cnow.overrun;
+		icnt.buf_overrun = cnow.buf_overrun;
+		icnt.parity = cnow.parity;
+		icnt.rx = cnow.rx;
+		icnt.tx = cnow.tx;
+		icnt.cts = cnow.cts;
+		icnt.dsr = cnow.dsr;
+		icnt.rng = cnow.rng;
+		icnt.dcd = cnow.dcd;
+
+		return copy_to_user(argp, &icnt, sizeof(icnt)) ? -EFAULT : 0;
+	}
 	case MOXA_HighSpeedOn:
 		return put_user(info->baud_base != 115200 ? 1 : 0, (int __user *)argp);
 	case MOXA_SDS_RSTICOUNTER:
@@ -2503,7 +2466,8 @@ static int __devinit mxser_initbrd(struct mxser_board *brd,
 	unsigned int i;
 	int retval;
 
-	printk(KERN_INFO "max. baud rate = %d bps.\n", brd->ports[0].max_baud);
+	printk(KERN_INFO "mxser: max. baud rate = %d bps\n",
+			brd->ports[0].max_baud);
 
 	for (i = 0; i < brd->info->nports; i++) {
 		info = &brd->ports[i];
@@ -2586,28 +2550,32 @@ static int __init mxser_get_ISA_conf(int cap, struct mxser_board *brd)
 		irq = regs[9] & 0xF000;
 		irq = irq | (irq >> 4);
 		if (irq != (regs[9] & 0xFF00))
-			return MXSER_ERR_IRQ_CONFLIT;
+			goto err_irqconflict;
 	} else if (brd->info->nports == 4) {
 		irq = regs[9] & 0xF000;
 		irq = irq | (irq >> 4);
 		irq = irq | (irq >> 8);
 		if (irq != regs[9])
-			return MXSER_ERR_IRQ_CONFLIT;
+			goto err_irqconflict;
 	} else if (brd->info->nports == 8) {
 		irq = regs[9] & 0xF000;
 		irq = irq | (irq >> 4);
 		irq = irq | (irq >> 8);
 		if ((irq != regs[9]) || (irq != regs[10]))
-			return MXSER_ERR_IRQ_CONFLIT;
+			goto err_irqconflict;
 	}
 
-	if (!irq)
-		return MXSER_ERR_IRQ;
+	if (!irq) {
+		printk(KERN_ERR "mxser: interrupt number unset\n");
+		return -EIO;
+	}
 	brd->irq = ((int)(irq & 0xF000) >> 12);
 	for (i = 0; i < 8; i++)
 		brd->ports[i].ioaddr = (int) regs[i + 1] & 0xFFF8;
-	if ((regs[12] & 0x80) == 0)
-		return MXSER_ERR_VECTOR;
+	if ((regs[12] & 0x80) == 0) {
+		printk(KERN_ERR "mxser: invalid interrupt vector\n");
+		return -EIO;
+	}
 	brd->vector = (int)regs[11];	/* interrupt vector */
 	if (id == 1)
 		brd->vector_mask = 0x00FF;
@@ -2634,13 +2602,26 @@ static int __init mxser_get_ISA_conf(int cap, struct mxser_board *brd)
 	else
 		brd->uart_type = PORT_16450;
 	if (!request_region(brd->ports[0].ioaddr, 8 * brd->info->nports,
-			"mxser(IO)"))
-		return MXSER_ERR_IOADDR;
+			"mxser(IO)")) {
+		printk(KERN_ERR "mxser: can't request ports I/O region: "
+				"0x%.8lx-0x%.8lx\n",
+				brd->ports[0].ioaddr, brd->ports[0].ioaddr +
+				8 * brd->info->nports - 1);
+		return -EIO;
+	}
 	if (!request_region(brd->vector, 1, "mxser(vector)")) {
 		release_region(brd->ports[0].ioaddr, 8 * brd->info->nports);
-		return MXSER_ERR_VECTOR;
+		printk(KERN_ERR "mxser: can't request interrupt vector region: "
+				"0x%.8lx-0x%.8lx\n",
+				brd->ports[0].ioaddr, brd->ports[0].ioaddr +
+				8 * brd->info->nports - 1);
+		return -EIO;
 	}
 	return brd->info->nports;
+
+err_irqconflict:
+	printk(KERN_ERR "mxser: invalid interrupt number\n");
+	return -EIO;
 }
 
 static int __devinit mxser_probe(struct pci_dev *pdev,
@@ -2657,20 +2638,20 @@ static int __devinit mxser_probe(struct pci_dev *pdev,
 			break;
 
 	if (i >= MXSER_BOARDS) {
-		printk(KERN_ERR "Too many Smartio/Industio family boards found "
-			"(maximum %d), board not configured\n", MXSER_BOARDS);
+		dev_err(&pdev->dev, "too many boards found (maximum %d), board "
+				"not configured\n", MXSER_BOARDS);
 		goto err;
 	}
 
 	brd = &mxser_boards[i];
 	brd->idx = i * MXSER_PORTS_PER_BOARD;
-	printk(KERN_INFO "Found MOXA %s board (BusNo=%d, DevNo=%d)\n",
+	dev_info(&pdev->dev, "found MOXA %s board (BusNo=%d, DevNo=%d)\n",
 		mxser_cards[ent->driver_data].name,
 		pdev->bus->number, PCI_SLOT(pdev->devfn));
 
 	retval = pci_enable_device(pdev);
 	if (retval) {
-		printk(KERN_ERR "Moxa SmartI/O PCI enable fail !\n");
+		dev_err(&pdev->dev, "PCI enable failed\n");
 		goto err;
 	}
 
@@ -2772,11 +2753,8 @@ static struct pci_driver mxser_driver = {
 static int __init mxser_module_init(void)
 {
 	struct mxser_board *brd;
-	unsigned long cap;
-	unsigned int i, m, isaloop;
-	int retval, b;
-
-	pr_debug("Loading module mxser ...\n");
+	unsigned int b, i, m;
+	int retval;
 
 	mxvar_sdriver = alloc_tty_driver(MXSER_PORTS + 1);
 	if (!mxvar_sdriver)
@@ -2806,74 +2784,43 @@ static int __init mxser_module_init(void)
 		goto err_put;
 	}
 
-	mxvar_diagflag = 0;
-
-	m = 0;
 	/* Start finding ISA boards here */
-	for (isaloop = 0; isaloop < 2; isaloop++)
-		for (b = 0; b < MXSER_BOARDS && m < MXSER_BOARDS; b++) {
-			if (!isaloop)
-				cap = mxserBoardCAP[b]; /* predefined */
-			else
-				cap = ioaddr[b]; /* module param */
-
-			if (!cap)
-				continue;
+	for (m = 0, b = 0; b < MXSER_BOARDS; b++) {
+		if (!ioaddr[b])
+			continue;
+
+		brd = &mxser_boards[m];
+		retval = mxser_get_ISA_conf(!ioaddr[b], brd);
+		if (retval <= 0) {
+			brd->info = NULL;
+			continue;
+		}
 
-			brd = &mxser_boards[m];
-			retval = mxser_get_ISA_conf(cap, brd);
-
-			if (retval != 0)
-				printk(KERN_INFO "Found MOXA %s board "
-					"(CAP=0x%x)\n",
-					brd->info->name, ioaddr[b]);
-
-			if (retval <= 0) {
-				if (retval == MXSER_ERR_IRQ)
-					printk(KERN_ERR "Invalid interrupt "
-						"number, board not "
-						"configured\n");
-				else if (retval == MXSER_ERR_IRQ_CONFLIT)
-					printk(KERN_ERR "Invalid interrupt "
-						"number, board not "
-						"configured\n");
-				else if (retval == MXSER_ERR_VECTOR)
-					printk(KERN_ERR "Invalid interrupt "
-						"vector, board not "
-						"configured\n");
-				else if (retval == MXSER_ERR_IOADDR)
-					printk(KERN_ERR "Invalid I/O address, "
-						"board not configured\n");
-
-				brd->info = NULL;
-				continue;
-			}
+		printk(KERN_INFO "mxser: found MOXA %s board (CAP=0x%lx)\n",
+				brd->info->name, ioaddr[b]);
 
-			/* mxser_initbrd will hook ISR. */
-			if (mxser_initbrd(brd, NULL) < 0) {
-				brd->info = NULL;
-				continue;
-			}
+		/* mxser_initbrd will hook ISR. */
+		if (mxser_initbrd(brd, NULL) < 0) {
+			brd->info = NULL;
+			continue;
+		}
 
-			brd->idx = m * MXSER_PORTS_PER_BOARD;
-			for (i = 0; i < brd->info->nports; i++)
-				tty_register_device(mxvar_sdriver, brd->idx + i,
-						NULL);
+		brd->idx = m * MXSER_PORTS_PER_BOARD;
+		for (i = 0; i < brd->info->nports; i++)
+			tty_register_device(mxvar_sdriver, brd->idx + i, NULL);
 
-			m++;
-		}
+		m++;
+	}
 
 	retval = pci_register_driver(&mxser_driver);
 	if (retval) {
-		printk(KERN_ERR "Can't register pci driver\n");
+		printk(KERN_ERR "mxser: can't register pci driver\n");
 		if (!m) {
 			retval = -ENODEV;
 			goto err_unr;
 		} /* else: we have some ISA cards under control */
 	}
 
-	pr_debug("Done.\n");
-
 	return 0;
 err_unr:
 	tty_unregister_driver(mxvar_sdriver);
@@ -2886,8 +2833,6 @@ static void __exit mxser_module_exit(void)
 {
 	unsigned int i, j;
 
-	pr_debug("Unloading module mxser ...\n");
-
 	pci_unregister_driver(&mxser_driver);
 
 	for (i = 0; i < MXSER_BOARDS; i++) /* ISA remains */
@@ -2901,8 +2846,6 @@ static void __exit mxser_module_exit(void)
 	for (i = 0; i < MXSER_BOARDS; i++)
 		if (mxser_boards[i].info != NULL)
 			mxser_release_res(&mxser_boards[i], NULL, 1);
-
-	pr_debug("Done.\n");
 }
 
 module_init(mxser_module_init);
diff --git a/drivers/char/nwflash.c b/drivers/char/nwflash.c
index ba012c2bdf7a..006be92ee3f3 100644
--- a/drivers/char/nwflash.c
+++ b/drivers/char/nwflash.c
@@ -122,35 +122,20 @@ static int flash_ioctl(struct inode *inodep, struct file *filep, unsigned int cm
 static ssize_t flash_read(struct file *file, char __user *buf, size_t size,
 			  loff_t *ppos)
 {
-	unsigned long p = *ppos;
-	unsigned int count = size;
-	int ret = 0;
+	ssize_t ret;
 
 	if (flashdebug)
-		printk(KERN_DEBUG "flash_read: flash_read: offset=0x%lX, "
-		       "buffer=%p, count=0x%X.\n", p, buf, count);
-
-	if (count)
-		ret = -ENXIO;
+		printk(KERN_DEBUG "flash_read: flash_read: offset=0x%llx, "
+		       "buffer=%p, count=0x%zx.\n", *ppos, buf, size);
+	/*
+	 * We now lock against reads and writes. --rmk
+	 */
+	if (mutex_lock_interruptible(&nwflash_mutex))
+		return -ERESTARTSYS;
 
-	if (p < gbFlashSize) {
-		if (count > gbFlashSize - p)
-			count = gbFlashSize - p;
+	ret = simple_read_from_buffer(buf, size, ppos, (void *)FLASH_BASE, gbFlashSize);
+	mutex_unlock(&nwflash_mutex);
 
-		/*
-		 * We now lock against reads and writes. --rmk
-		 */
-		if (mutex_lock_interruptible(&nwflash_mutex))
-			return -ERESTARTSYS;
-
-		ret = copy_to_user(buf, (void *)(FLASH_BASE + p), count);
-		if (ret == 0) {
-			ret = count;
-			*ppos += count;
-		} else
-			ret = -EFAULT;
-		mutex_unlock(&nwflash_mutex);
-	}
 	return ret;
 }
 
diff --git a/drivers/char/pcmcia/ipwireless/hardware.c b/drivers/char/pcmcia/ipwireless/hardware.c
index 929101ecbae2..4c1820cad712 100644
--- a/drivers/char/pcmcia/ipwireless/hardware.c
+++ b/drivers/char/pcmcia/ipwireless/hardware.c
@@ -30,11 +30,11 @@
 static void ipw_send_setup_packet(struct ipw_hardware *hw);
 static void handle_received_SETUP_packet(struct ipw_hardware *ipw,
 					 unsigned int address,
-					 unsigned char *data, int len,
+					 const unsigned char *data, int len,
 					 int is_last);
 static void ipwireless_setup_timer(unsigned long data);
 static void handle_received_CTRL_packet(struct ipw_hardware *hw,
-		unsigned int channel_idx, unsigned char *data, int len);
+		unsigned int channel_idx, const unsigned char *data, int len);
 
 /*#define TIMING_DIAGNOSTICS*/
 
@@ -79,8 +79,7 @@ static void report_timing(void)
 		timing_stats.last_report_time = jiffies;
 		if (!first)
 			printk(KERN_INFO IPWIRELESS_PCCARD_NAME
-			       ": %u us elapsed - read %lu bytes in %u us, "
-			       "wrote %lu bytes in %u us\n",
+			       ": %u us elapsed - read %lu bytes in %u us, wrote %lu bytes in %u us\n",
 			       jiffies_to_usecs(since),
 			       timing_stats.read_bytes,
 			       jiffies_to_usecs(timing_stats.read_time),
@@ -133,29 +132,17 @@ enum {
 #define NL_FOLLOWING_PACKET_HEADER_SIZE    1
 
 struct nl_first_packet_header {
-#if defined(__BIG_ENDIAN_BITFIELD)
-	unsigned char packet_rank:2;
-	unsigned char address:3;
-	unsigned char protocol:3;
-#else
 	unsigned char protocol:3;
 	unsigned char address:3;
 	unsigned char packet_rank:2;
-#endif
 	unsigned char length_lsb;
 	unsigned char length_msb;
 };
 
 struct nl_packet_header {
-#if defined(__BIG_ENDIAN_BITFIELD)
-	unsigned char packet_rank:2;
-	unsigned char address:3;
-	unsigned char protocol:3;
-#else
 	unsigned char protocol:3;
 	unsigned char address:3;
 	unsigned char packet_rank:2;
-#endif
 };
 
 /* Value of 'packet_rank' above */
@@ -227,15 +214,12 @@ struct MEMINFREG {
 	unsigned short memreg_tx_new;	/* TX2 (new) Register (R/W) */
 };
 
-#define IODMADPR 0x00		/* DMA Data Port Register (R/W) */
-
 #define CARD_PRESENT_VALUE (0xBEEFCAFEUL)
 
 #define MEMTX_TX                       0x0001
 #define MEMRX_RX                       0x0001
 #define MEMRX_RX_DONE                  0x0001
 #define MEMRX_PCINTACKK                0x0001
-#define MEMRX_MEMSPURIOUSINT           0x0001
 
 #define NL_NUM_OF_PRIORITIES       3
 #define NL_NUM_OF_PROTOCOLS        3
@@ -245,7 +229,7 @@ struct ipw_hardware {
 	unsigned int base_port;
 	short hw_version;
 	unsigned short ll_mtu;
-	spinlock_t spinlock;
+	spinlock_t lock;
 
 	int initializing;
 	int init_loops;
@@ -386,26 +370,52 @@ static void dump_data_bytes(const char *type, const unsigned char *data,
 			length < DUMP_MAX_BYTES ? length : DUMP_MAX_BYTES);
 }
 
-static int do_send_fragment(struct ipw_hardware *hw, const unsigned char *data,
+static void swap_packet_bitfield_to_le(unsigned char *data)
+{
+#ifdef __BIG_ENDIAN_BITFIELD
+	unsigned char tmp = *data, ret = 0;
+
+	/*
+	 * transform bits from aa.bbb.ccc to ccc.bbb.aa
+	 */
+	ret |= tmp & 0xc0 >> 6;
+	ret |= tmp & 0x38 >> 1;
+	ret |= tmp & 0x07 << 5;
+	*data = ret & 0xff;
+#endif
+}
+
+static void swap_packet_bitfield_from_le(unsigned char *data)
+{
+#ifdef __BIG_ENDIAN_BITFIELD
+	unsigned char tmp = *data, ret = 0;
+
+	/*
+	 * transform bits from ccc.bbb.aa to aa.bbb.ccc
+	 */
+	ret |= tmp & 0xe0 >> 5;
+	ret |= tmp & 0x1c << 1;
+	ret |= tmp & 0x03 << 6;
+	*data = ret & 0xff;
+#endif
+}
+
+static void do_send_fragment(struct ipw_hardware *hw, unsigned char *data,
 			    unsigned length)
 {
-	int i;
+	unsigned i;
 	unsigned long flags;
 
 	start_timing();
-
-	if (length == 0)
-		return 0;
-
-	if (length > hw->ll_mtu)
-		return -1;
+	BUG_ON(length > hw->ll_mtu);
 
 	if (ipwireless_debug)
 		dump_data_bytes("send", data, length);
 
-	spin_lock_irqsave(&hw->spinlock, flags);
+	spin_lock_irqsave(&hw->lock, flags);
 
 	hw->tx_ready = 0;
+	swap_packet_bitfield_to_le(data);
 
 	if (hw->hw_version == HW_VERSION_1) {
 		outw((unsigned short) length, hw->base_port + IODWR);
@@ -414,7 +424,7 @@ static int do_send_fragment(struct ipw_hardware *hw, const unsigned char *data,
 			unsigned short d = data[i];
 			__le16 raw_data;
 
-			if (likely(i + 1 < length))
+			if (i + 1 < length)
 				d |= data[i + 1] << 8;
 			raw_data = cpu_to_le16(d);
 			outw(raw_data, hw->base_port + IODWR);
@@ -422,32 +432,30 @@ static int do_send_fragment(struct ipw_hardware *hw, const unsigned char *data,
 
 		outw(DCR_TXDONE, hw->base_port + IODCR);
 	} else if (hw->hw_version == HW_VERSION_2) {
-		outw((unsigned short) length, hw->base_port + IODMADPR);
+		outw((unsigned short) length, hw->base_port);
 
 		for (i = 0; i < length; i += 2) {
 			unsigned short d = data[i];
 			__le16 raw_data;
 
-			if ((i + 1 < length))
+			if (i + 1 < length)
 				d |= data[i + 1] << 8;
 			raw_data = cpu_to_le16(d);
-			outw(raw_data, hw->base_port + IODMADPR);
+			outw(raw_data, hw->base_port);
 		}
 		while ((i & 3) != 2) {
-			outw((unsigned short) 0xDEAD, hw->base_port + IODMADPR);
+			outw((unsigned short) 0xDEAD, hw->base_port);
 			i += 2;
 		}
 		writew(MEMRX_RX, &hw->memory_info_regs->memreg_rx);
 	}
 
-	spin_unlock_irqrestore(&hw->spinlock, flags);
+	spin_unlock_irqrestore(&hw->lock, flags);
 
 	end_write_timing(length);
-
-	return 0;
 }
 
-static int do_send_packet(struct ipw_hardware *hw, struct ipw_tx_packet *packet)
+static void do_send_packet(struct ipw_hardware *hw, struct ipw_tx_packet *packet)
 {
 	unsigned short fragment_data_len;
 	unsigned short data_left = packet->length - packet->offset;
@@ -462,6 +470,10 @@ static int do_send_packet(struct ipw_hardware *hw, struct ipw_tx_packet *packet)
 	if (data_left < fragment_data_len)
 		fragment_data_len = data_left;
 
+	/*
+	 * hdr_first is now in machine bitfield order, which will be swapped
+	 * to le just before it goes to hw
+	 */
 	pkt.hdr_first.protocol = packet->protocol;
 	pkt.hdr_first.address = packet->dest_addr;
 	pkt.hdr_first.packet_rank = 0;
@@ -493,25 +505,23 @@ static int do_send_packet(struct ipw_hardware *hw, struct ipw_tx_packet *packet)
 		 */
 		unsigned long flags;
 
-		spin_lock_irqsave(&hw->spinlock, flags);
+		spin_lock_irqsave(&hw->lock, flags);
 		list_add(&packet->queue, &hw->tx_queue[0]);
 		hw->tx_queued++;
-		spin_unlock_irqrestore(&hw->spinlock, flags);
+		spin_unlock_irqrestore(&hw->lock, flags);
 	} else {
 		if (packet->packet_callback)
 			packet->packet_callback(packet->callback_data,
 					packet->length);
 		kfree(packet);
 	}
-
-	return 0;
 }
 
 static void ipw_setup_hardware(struct ipw_hardware *hw)
 {
 	unsigned long flags;
 
-	spin_lock_irqsave(&hw->spinlock, flags);
+	spin_lock_irqsave(&hw->lock, flags);
 	if (hw->hw_version == HW_VERSION_1) {
 		/* Reset RX FIFO */
 		outw(DCR_RXRESET, hw->base_port + IODCR);
@@ -530,7 +540,7 @@ static void ipw_setup_hardware(struct ipw_hardware *hw)
 		csr |= 1;
 		writew(csr, &hw->memregs_CCR->reg_config_and_status);
 	}
-	spin_unlock_irqrestore(&hw->spinlock, flags);
+	spin_unlock_irqrestore(&hw->lock, flags);
 }
 
 /*
@@ -549,28 +559,23 @@ static struct ipw_rx_packet *pool_allocate(struct ipw_hardware *hw,
 	if (!packet) {
 		unsigned long flags;
 
-		/*
-		 * If this is the first fragment, then we will need to fetch a
-		 * packet to put it in.
-		 */
-		spin_lock_irqsave(&hw->spinlock, flags);
-		/* If we have one in our pool, then pull it out. */
+		spin_lock_irqsave(&hw->lock, flags);
 		if (!list_empty(&hw->rx_pool)) {
 			packet = list_first_entry(&hw->rx_pool,
 					struct ipw_rx_packet, queue);
-			list_del(&packet->queue);
 			hw->rx_pool_size--;
-			spin_unlock_irqrestore(&hw->spinlock, flags);
+			spin_unlock_irqrestore(&hw->lock, flags);
+			list_del(&packet->queue);
 		} else {
-			/* Otherwise allocate a new one. */
-			static int min_capacity = 256;
+			const int min_capacity =
+				ipwireless_ppp_mru(hw->network) + 2;
 			int new_capacity;
 
-			spin_unlock_irqrestore(&hw->spinlock, flags);
+			spin_unlock_irqrestore(&hw->lock, flags);
 			new_capacity =
-			    minimum_free_space > min_capacity
-			    ? minimum_free_space
-			    : min_capacity;
+				(minimum_free_space > min_capacity
+				 ? minimum_free_space
+				 : min_capacity);
 			packet = kmalloc(sizeof(struct ipw_rx_packet)
 					+ new_capacity, GFP_ATOMIC);
 			if (!packet)
@@ -580,10 +585,6 @@ static struct ipw_rx_packet *pool_allocate(struct ipw_hardware *hw,
 		packet->length = 0;
 	}
 
-	/*
-	 * If this packet does not have sufficient capacity for the data we
-	 * want to add, then make it bigger.
-	 */
 	if (packet->length + minimum_free_space > packet->capacity) {
 		struct ipw_rx_packet *old_packet = packet;
 
@@ -610,13 +611,15 @@ static void pool_free(struct ipw_hardware *hw, struct ipw_rx_packet *packet)
 		kfree(packet);
 	else {
 		hw->rx_pool_size++;
-		list_add_tail(&packet->queue, &hw->rx_pool);
+		list_add(&packet->queue, &hw->rx_pool);
 	}
 }
 
 static void queue_received_packet(struct ipw_hardware *hw,
-				  unsigned int protocol, unsigned int address,
-				  unsigned char *data, int length, int is_last)
+				  unsigned int protocol,
+				  unsigned int address,
+				  const unsigned char *data, int length,
+				  int is_last)
 {
 	unsigned int channel_idx = address - 1;
 	struct ipw_rx_packet *packet = NULL;
@@ -658,9 +661,9 @@ static void queue_received_packet(struct ipw_hardware *hw,
 			packet = *assem;
 			*assem = NULL;
 			/* Count queued DATA bytes only */
-			spin_lock_irqsave(&hw->spinlock, flags);
+			spin_lock_irqsave(&hw->lock, flags);
 			hw->rx_bytes_queued += packet->length;
-			spin_unlock_irqrestore(&hw->spinlock, flags);
+			spin_unlock_irqrestore(&hw->lock, flags);
 		}
 	} else {
 		/* If it's a CTRL packet, don't assemble, just queue it. */
@@ -682,13 +685,13 @@ static void queue_received_packet(struct ipw_hardware *hw,
 	 * network layer.
 	 */
 	if (packet) {
-		spin_lock_irqsave(&hw->spinlock, flags);
+		spin_lock_irqsave(&hw->lock, flags);
 		list_add_tail(&packet->queue, &hw->rx_queue);
 		/* Block reception of incoming packets if queue is full. */
 		hw->blocking_rx =
-			hw->rx_bytes_queued >= IPWIRELESS_RX_QUEUE_SIZE;
+			(hw->rx_bytes_queued >= IPWIRELESS_RX_QUEUE_SIZE);
 
-		spin_unlock_irqrestore(&hw->spinlock, flags);
+		spin_unlock_irqrestore(&hw->lock, flags);
 		schedule_work(&hw->work_rx);
 	}
 }
@@ -702,7 +705,7 @@ static void ipw_receive_data_work(struct work_struct *work_rx)
 	    container_of(work_rx, struct ipw_hardware, work_rx);
 	unsigned long flags;
 
-	spin_lock_irqsave(&hw->spinlock, flags);
+	spin_lock_irqsave(&hw->lock, flags);
 	while (!list_empty(&hw->rx_queue)) {
 		struct ipw_rx_packet *packet =
 			list_first_entry(&hw->rx_queue,
@@ -720,7 +723,7 @@ static void ipw_receive_data_work(struct work_struct *work_rx)
 		if (packet->protocol == TL_PROTOCOLID_COM_DATA) {
 			if (hw->network != NULL) {
 				/* If the network hasn't been disconnected. */
-				spin_unlock_irqrestore(&hw->spinlock, flags);
+				spin_unlock_irqrestore(&hw->lock, flags);
 				/*
 				 * This must run unlocked due to tty processing
 				 * and mutex locking
@@ -731,7 +734,7 @@ static void ipw_receive_data_work(struct work_struct *work_rx)
 						(unsigned char *)packet
 						+ sizeof(struct ipw_rx_packet),
 						packet->length);
-				spin_lock_irqsave(&hw->spinlock, flags);
+				spin_lock_irqsave(&hw->lock, flags);
 			}
 			/* Count queued DATA bytes only */
 			hw->rx_bytes_queued -= packet->length;
@@ -755,15 +758,15 @@ static void ipw_receive_data_work(struct work_struct *work_rx)
 		if (hw->shutting_down)
 			break;
 	}
-	spin_unlock_irqrestore(&hw->spinlock, flags);
+	spin_unlock_irqrestore(&hw->lock, flags);
 }
 
 static void handle_received_CTRL_packet(struct ipw_hardware *hw,
 					unsigned int channel_idx,
-					unsigned char *data, int len)
+					const unsigned char *data, int len)
 {
-	struct ipw_control_packet_body *body =
-		(struct ipw_control_packet_body *) data;
+	const struct ipw_control_packet_body *body =
+		(const struct ipw_control_packet_body *) data;
 	unsigned int changed_mask;
 
 	if (len != sizeof(struct ipw_control_packet_body)) {
@@ -805,13 +808,13 @@ static void handle_received_CTRL_packet(struct ipw_hardware *hw,
 }
 
 static void handle_received_packet(struct ipw_hardware *hw,
-				   union nl_packet *packet,
+				   const union nl_packet *packet,
 				   unsigned short len)
 {
 	unsigned int protocol = packet->hdr.protocol;
 	unsigned int address = packet->hdr.address;
 	unsigned int header_length;
-	unsigned char *data;
+	const unsigned char *data;
 	unsigned int data_len;
 	int is_last = packet->hdr.packet_rank & NL_LAST_PACKET;
 
@@ -850,7 +853,7 @@ static void acknowledge_data_read(struct ipw_hardware *hw)
 static void do_receive_packet(struct ipw_hardware *hw)
 {
 	unsigned len;
-	unsigned int i;
+	unsigned i;
 	unsigned char pkt[LL_MTU_MAX];
 
 	start_timing();
@@ -859,8 +862,7 @@ static void do_receive_packet(struct ipw_hardware *hw)
 		len = inw(hw->base_port + IODRR);
 		if (len > hw->ll_mtu) {
 			printk(KERN_INFO IPWIRELESS_PCCARD_NAME
-			       ": received a packet of %u bytes - "
-			       "longer than the MTU!\n", len);
+			       ": received a packet of %u bytes - longer than the MTU!\n", len);
 			outw(DCR_RXDONE | DCR_RXRESET, hw->base_port + IODCR);
 			return;
 		}
@@ -873,18 +875,17 @@ static void do_receive_packet(struct ipw_hardware *hw)
 			pkt[i + 1] = (unsigned char) (data >> 8);
 		}
 	} else {
-		len = inw(hw->base_port + IODMADPR);
+		len = inw(hw->base_port);
 		if (len > hw->ll_mtu) {
 			printk(KERN_INFO IPWIRELESS_PCCARD_NAME
-			       ": received a packet of %u bytes - "
-			       "longer than the MTU!\n", len);
+			       ": received a packet of %u bytes - longer than the MTU!\n", len);
 			writew(MEMRX_PCINTACKK,
 				&hw->memory_info_regs->memreg_pc_interrupt_ack);
 			return;
 		}
 
 		for (i = 0; i < len; i += 2) {
-			__le16 raw_data = inw(hw->base_port + IODMADPR);
+			__le16 raw_data = inw(hw->base_port);
 			unsigned short data = le16_to_cpu(raw_data);
 
 			pkt[i] = (unsigned char) data;
@@ -892,13 +893,15 @@ static void do_receive_packet(struct ipw_hardware *hw)
 		}
 
 		while ((i & 3) != 2) {
-			inw(hw->base_port + IODMADPR);
+			inw(hw->base_port);
 			i += 2;
 		}
 	}
 
 	acknowledge_data_read(hw);
 
+	swap_packet_bitfield_from_le(pkt);
+
 	if (ipwireless_debug)
 		dump_data_bytes("recv", pkt, len);
 
@@ -916,8 +919,7 @@ static int get_current_packet_priority(struct ipw_hardware *hw)
 	 * until setup is complete.
 	 */
 	return (hw->to_setup || hw->initializing
-			? PRIO_SETUP + 1 :
-			NL_NUM_OF_PRIORITIES);
+			? PRIO_SETUP + 1 : NL_NUM_OF_PRIORITIES);
 }
 
 /*
@@ -928,17 +930,17 @@ static int get_packets_from_hw(struct ipw_hardware *hw)
 	int received = 0;
 	unsigned long flags;
 
-	spin_lock_irqsave(&hw->spinlock, flags);
+	spin_lock_irqsave(&hw->lock, flags);
 	while (hw->rx_ready && !hw->blocking_rx) {
 		received = 1;
 		hw->rx_ready--;
-		spin_unlock_irqrestore(&hw->spinlock, flags);
+		spin_unlock_irqrestore(&hw->lock, flags);
 
 		do_receive_packet(hw);
 
-		spin_lock_irqsave(&hw->spinlock, flags);
+		spin_lock_irqsave(&hw->lock, flags);
 	}
-	spin_unlock_irqrestore(&hw->spinlock, flags);
+	spin_unlock_irqrestore(&hw->lock, flags);
 
 	return received;
 }
@@ -954,7 +956,7 @@ static int send_pending_packet(struct ipw_hardware *hw, int priority_limit)
 	int more_to_send = 0;
 	unsigned long flags;
 
-	spin_lock_irqsave(&hw->spinlock, flags);
+	spin_lock_irqsave(&hw->lock, flags);
 	if (hw->tx_queued && hw->tx_ready) {
 		int priority;
 		struct ipw_tx_packet *packet = NULL;
@@ -975,17 +977,17 @@ static int send_pending_packet(struct ipw_hardware *hw, int priority_limit)
 		}
 		if (!packet) {
 			hw->tx_queued = 0;
-			spin_unlock_irqrestore(&hw->spinlock, flags);
+			spin_unlock_irqrestore(&hw->lock, flags);
 			return 0;
 		}
 
-		spin_unlock_irqrestore(&hw->spinlock, flags);
+		spin_unlock_irqrestore(&hw->lock, flags);
 
 		/* Send */
 		do_send_packet(hw, packet);
 
 		/* Check if more to send */
-		spin_lock_irqsave(&hw->spinlock, flags);
+		spin_lock_irqsave(&hw->lock, flags);
 		for (priority = 0; priority < priority_limit; priority++)
 			if (!list_empty(&hw->tx_queue[priority])) {
 				more_to_send = 1;
@@ -995,7 +997,7 @@ static int send_pending_packet(struct ipw_hardware *hw, int priority_limit)
 		if (!more_to_send)
 			hw->tx_queued = 0;
 	}
-	spin_unlock_irqrestore(&hw->spinlock, flags);
+	spin_unlock_irqrestore(&hw->lock, flags);
 
 	return more_to_send;
 }
@@ -1008,9 +1010,9 @@ static void ipwireless_do_tasklet(unsigned long hw_)
 	struct ipw_hardware *hw = (struct ipw_hardware *) hw_;
 	unsigned long flags;
 
-	spin_lock_irqsave(&hw->spinlock, flags);
+	spin_lock_irqsave(&hw->lock, flags);
 	if (hw->shutting_down) {
-		spin_unlock_irqrestore(&hw->spinlock, flags);
+		spin_unlock_irqrestore(&hw->lock, flags);
 		return;
 	}
 
@@ -1019,7 +1021,7 @@ static void ipwireless_do_tasklet(unsigned long hw_)
 		 * Initial setup data sent to hardware
 		 */
 		hw->to_setup = 2;
-		spin_unlock_irqrestore(&hw->spinlock, flags);
+		spin_unlock_irqrestore(&hw->lock, flags);
 
 		ipw_setup_hardware(hw);
 		ipw_send_setup_packet(hw);
@@ -1030,7 +1032,7 @@ static void ipwireless_do_tasklet(unsigned long hw_)
 		int priority_limit = get_current_packet_priority(hw);
 		int again;
 
-		spin_unlock_irqrestore(&hw->spinlock, flags);
+		spin_unlock_irqrestore(&hw->lock, flags);
 
 		do {
 			again = send_pending_packet(hw, priority_limit);
@@ -1068,16 +1070,16 @@ static irqreturn_t ipwireless_handle_v1_interrupt(int irq,
 		/* Transmit complete. */
 		if (irqn & IR_TXINTR) {
 			ack |= IR_TXINTR;
-			spin_lock_irqsave(&hw->spinlock, flags);
+			spin_lock_irqsave(&hw->lock, flags);
 			hw->tx_ready = 1;
-			spin_unlock_irqrestore(&hw->spinlock, flags);
+			spin_unlock_irqrestore(&hw->lock, flags);
 		}
 		/* Received data */
 		if (irqn & IR_RXINTR) {
 			ack |= IR_RXINTR;
-			spin_lock_irqsave(&hw->spinlock, flags);
+			spin_lock_irqsave(&hw->lock, flags);
 			hw->rx_ready++;
-			spin_unlock_irqrestore(&hw->spinlock, flags);
+			spin_unlock_irqrestore(&hw->lock, flags);
 		}
 		if (ack != 0) {
 			outw(ack, hw->base_port + IOIR);
@@ -1128,9 +1130,8 @@ static irqreturn_t ipwireless_handle_v2_v3_interrupt(int irq,
 			} else {
 				return IRQ_NONE;
 			}
-		} else {
+		} else
 			return IRQ_NONE;
-		}
 	}
 
 	/*
@@ -1149,9 +1150,9 @@ static irqreturn_t ipwireless_handle_v2_v3_interrupt(int irq,
 		if (hw->serial_number_detected) {
 			if (memtx_serial != hw->last_memtx_serial) {
 				hw->last_memtx_serial = memtx_serial;
-				spin_lock_irqsave(&hw->spinlock, flags);
+				spin_lock_irqsave(&hw->lock, flags);
 				hw->rx_ready++;
-				spin_unlock_irqrestore(&hw->spinlock, flags);
+				spin_unlock_irqrestore(&hw->lock, flags);
 				rx = 1;
 			} else
 				/* Ignore 'Timer Recovery' duplicates. */
@@ -1166,18 +1167,18 @@ static irqreturn_t ipwireless_handle_v2_v3_interrupt(int irq,
 				printk(KERN_DEBUG IPWIRELESS_PCCARD_NAME
 					": memreg_tx serial num detected\n");
 
-				spin_lock_irqsave(&hw->spinlock, flags);
+				spin_lock_irqsave(&hw->lock, flags);
 				hw->rx_ready++;
-				spin_unlock_irqrestore(&hw->spinlock, flags);
+				spin_unlock_irqrestore(&hw->lock, flags);
 			}
 			rx = 1;
 		}
 	}
 	if (memrxdone & MEMRX_RX_DONE) {
 		writew(0, &hw->memory_info_regs->memreg_rx_done);
-		spin_lock_irqsave(&hw->spinlock, flags);
+		spin_lock_irqsave(&hw->lock, flags);
 		hw->tx_ready = 1;
-		spin_unlock_irqrestore(&hw->spinlock, flags);
+		spin_unlock_irqrestore(&hw->lock, flags);
 		tx = 1;
 	}
 	if (tx)
@@ -1195,8 +1196,7 @@ static irqreturn_t ipwireless_handle_v2_v3_interrupt(int irq,
 					": spurious interrupt - new_tx mode\n");
 			else {
 				printk(KERN_WARNING IPWIRELESS_PCCARD_NAME
-					": no valid memreg_tx value - "
-					"switching to the old memreg_tx\n");
+					": no valid memreg_tx value - switching to the old memreg_tx\n");
 				hw->memreg_tx =
 					&hw->memory_info_regs->memreg_tx_old;
 				try_mem_tx_old = 1;
@@ -1211,7 +1211,7 @@ static irqreturn_t ipwireless_handle_v2_v3_interrupt(int irq,
 	return IRQ_HANDLED;
 }
 
-irqreturn_t ipwireless_interrupt(int irq, void *dev_id, struct pt_regs *regs)
+irqreturn_t ipwireless_interrupt(int irq, void *dev_id)
 {
 	struct ipw_hardware *hw = dev_id;
 
@@ -1226,9 +1226,9 @@ static void flush_packets_to_hw(struct ipw_hardware *hw)
 	int priority_limit;
 	unsigned long flags;
 
-	spin_lock_irqsave(&hw->spinlock, flags);
+	spin_lock_irqsave(&hw->lock, flags);
 	priority_limit = get_current_packet_priority(hw);
-	spin_unlock_irqrestore(&hw->spinlock, flags);
+	spin_unlock_irqrestore(&hw->lock, flags);
 
 	while (send_pending_packet(hw, priority_limit));
 }
@@ -1238,10 +1238,10 @@ static void send_packet(struct ipw_hardware *hw, int priority,
 {
 	unsigned long flags;
 
-	spin_lock_irqsave(&hw->spinlock, flags);
+	spin_lock_irqsave(&hw->lock, flags);
 	list_add_tail(&packet->queue, &hw->tx_queue[priority]);
 	hw->tx_queued++;
-	spin_unlock_irqrestore(&hw->spinlock, flags);
+	spin_unlock_irqrestore(&hw->lock, flags);
 
 	flush_packets_to_hw(hw);
 }
@@ -1291,21 +1291,20 @@ static void *alloc_ctrl_packet(int header_size,
 }
 
 int ipwireless_send_packet(struct ipw_hardware *hw, unsigned int channel_idx,
-			    unsigned char *data, unsigned int length,
+			    const unsigned char *data, unsigned int length,
 			    void (*callback) (void *cb, unsigned int length),
 			    void *callback_data)
 {
 	struct ipw_tx_packet *packet;
 
-	packet = alloc_data_packet(length,
-			       (unsigned char) (channel_idx + 1),
-			       TL_PROTOCOLID_COM_DATA);
+	packet = alloc_data_packet(length, (channel_idx + 1),
+			TL_PROTOCOLID_COM_DATA);
 	if (!packet)
 		return -ENOMEM;
 	packet->packet_callback = callback;
 	packet->callback_data = callback_data;
-	memcpy((unsigned char *) packet +
-			sizeof(struct ipw_tx_packet), data, length);
+	memcpy((unsigned char *) packet + sizeof(struct ipw_tx_packet), data,
+			length);
 
 	send_packet(hw, PRIO_DATA, packet);
 	return 0;
@@ -1321,12 +1320,11 @@ static int set_control_line(struct ipw_hardware *hw, int prio,
 		protocolid = TL_PROTOCOLID_SETUP;
 
 	packet = alloc_ctrl_packet(sizeof(struct ipw_control_packet),
-			(unsigned char) (channel_idx + 1),
-			protocolid, line);
+			(channel_idx + 1), protocolid, line);
 	if (!packet)
 		return -ENOMEM;
 	packet->header.length = sizeof(struct ipw_control_packet_body);
-	packet->body.value = (unsigned char) (state == 0 ? 0 : 1);
+	packet->body.value = (state == 0 ? 0 : 1);
 	send_packet(hw, prio, &packet->header);
 	return 0;
 }
@@ -1504,8 +1502,7 @@ static void handle_setup_get_version_rsp(struct ipw_hardware *hw,
 	if (vers_no == TL_SETUP_VERSION)
 		__handle_setup_get_version_rsp(hw);
 	else
-		printk(KERN_ERR
-				IPWIRELESS_PCCARD_NAME
+		printk(KERN_ERR IPWIRELESS_PCCARD_NAME
 				": invalid hardware version no %u\n",
 				(unsigned int) vers_no);
 }
@@ -1528,10 +1525,10 @@ static void ipw_send_setup_packet(struct ipw_hardware *hw)
 
 static void handle_received_SETUP_packet(struct ipw_hardware *hw,
 					 unsigned int address,
-					 unsigned char *data, int len,
+					 const unsigned char *data, int len,
 					 int is_last)
 {
-	union ipw_setup_rx_msg *rx_msg = (union ipw_setup_rx_msg *) data;
+	const union ipw_setup_rx_msg *rx_msg = (const union ipw_setup_rx_msg *) data;
 
 	if (address != ADDR_SETUP_PROT) {
 		printk(KERN_INFO IPWIRELESS_PCCARD_NAME
@@ -1629,7 +1626,7 @@ struct ipw_hardware *ipwireless_hardware_create(void)
 
 	INIT_LIST_HEAD(&hw->rx_queue);
 	INIT_LIST_HEAD(&hw->rx_pool);
-	spin_lock_init(&hw->spinlock);
+	spin_lock_init(&hw->lock);
 	tasklet_init(&hw->tasklet, ipwireless_do_tasklet, (unsigned long) hw);
 	INIT_WORK(&hw->work_rx, ipw_receive_data_work);
 	setup_timer(&hw->setup_timer, ipwireless_setup_timer,
@@ -1651,8 +1648,8 @@ void ipwireless_init_hardware_v1(struct ipw_hardware *hw,
 		enable_irq(hw->irq);
 	}
 	hw->base_port = base_port;
-	hw->hw_version = is_v2_card ? HW_VERSION_2 : HW_VERSION_1;
-	hw->ll_mtu = hw->hw_version == HW_VERSION_1 ? LL_MTU_V1 : LL_MTU_V2;
+	hw->hw_version = (is_v2_card ? HW_VERSION_2 : HW_VERSION_1);
+	hw->ll_mtu = (hw->hw_version == HW_VERSION_1 ? LL_MTU_V1 : LL_MTU_V2);
 	hw->memregs_CCR = (struct MEMCCR __iomem *)
 			((unsigned short __iomem *) attr_memory + 0x200);
 	hw->memory_info_regs = (struct MEMINFREG __iomem *) common_memory;
@@ -1695,10 +1692,10 @@ static void ipwireless_setup_timer(unsigned long data)
 		if (is_card_present(hw)) {
 			unsigned long flags;
 
-			spin_lock_irqsave(&hw->spinlock, flags);
+			spin_lock_irqsave(&hw->lock, flags);
 			hw->to_setup = 1;
 			hw->tx_ready = 1;
-			spin_unlock_irqrestore(&hw->spinlock, flags);
+			spin_unlock_irqrestore(&hw->lock, flags);
 			tasklet_schedule(&hw->tasklet);
 		}
 
diff --git a/drivers/char/pcmcia/ipwireless/hardware.h b/drivers/char/pcmcia/ipwireless/hardware.h
index 19ce5eb266b1..90a8590e43b0 100644
--- a/drivers/char/pcmcia/ipwireless/hardware.h
+++ b/drivers/char/pcmcia/ipwireless/hardware.h
@@ -34,14 +34,14 @@ struct ipw_network;
 
 struct ipw_hardware *ipwireless_hardware_create(void);
 void ipwireless_hardware_free(struct ipw_hardware *hw);
-irqreturn_t ipwireless_interrupt(int irq, void *dev_id, struct pt_regs *regs);
+irqreturn_t ipwireless_interrupt(int irq, void *dev_id);
 int ipwireless_set_DTR(struct ipw_hardware *hw, unsigned int channel_idx,
 		int state);
 int ipwireless_set_RTS(struct ipw_hardware *hw, unsigned int channel_idx,
 		int state);
 int ipwireless_send_packet(struct ipw_hardware *hw,
 			    unsigned int channel_idx,
-			    unsigned char *data,
+			    const unsigned char *data,
 			    unsigned int length,
 			    void (*packet_sent_callback) (void *cb,
 							  unsigned int length),
diff --git a/drivers/char/pcmcia/ipwireless/main.c b/drivers/char/pcmcia/ipwireless/main.c
index cc7dcea2d283..5eca7a99afe6 100644
--- a/drivers/char/pcmcia/ipwireless/main.c
+++ b/drivers/char/pcmcia/ipwireless/main.c
@@ -49,7 +49,7 @@ static void ipwireless_detach(struct pcmcia_device *link);
 /* Debug mode: more verbose, print sent/recv bytes */
 int ipwireless_debug;
 int ipwireless_loopback;
-int ipwireless_out_queue = 1;
+int ipwireless_out_queue = 10;
 
 module_param_named(debug, ipwireless_debug, int, 0);
 module_param_named(loopback, ipwireless_loopback, int, 0);
@@ -57,7 +57,7 @@ module_param_named(out_queue, ipwireless_out_queue, int, 0);
 MODULE_PARM_DESC(debug, "switch on debug messages [0]");
 MODULE_PARM_DESC(loopback,
 		"debug: enable ras_raw channel [0]");
-MODULE_PARM_DESC(out_queue, "debug: set size of outgoing queue [1]");
+MODULE_PARM_DESC(out_queue, "debug: set size of outgoing PPP queue [10]");
 
 /* Executes in process context. */
 static void signalled_reboot_work(struct work_struct *work_reboot)
@@ -88,8 +88,6 @@ static int config_ipwireless(struct ipw_dev *ipw)
 	unsigned short buf[64];
 	cisparse_t parse;
 	unsigned short cor_value;
-	win_req_t request_attr_memory;
-	win_req_t request_common_memory;
 	memreq_t memreq_attr_memory;
 	memreq_t memreq_common_memory;
 
@@ -188,6 +186,9 @@ static int config_ipwireless(struct ipw_dev *ipw)
 		goto exit0;
 	}
 
+	request_region(link->io.BasePort1, link->io.NumPorts1,
+			IPWIRELESS_PCCARD_NAME);
+
 	/* memory settings */
 
 	tuple.DesiredTuple = CISTPL_CFTABLE_ENTRY;
@@ -214,16 +215,16 @@ static int config_ipwireless(struct ipw_dev *ipw)
 	}
 
 	if (parse.cftable_entry.mem.nwin > 0) {
-		request_common_memory.Attributes =
+		ipw->request_common_memory.Attributes =
 			WIN_DATA_WIDTH_16 | WIN_MEMORY_TYPE_CM | WIN_ENABLE;
-		request_common_memory.Base =
+		ipw->request_common_memory.Base =
 			parse.cftable_entry.mem.win[0].host_addr;
-		request_common_memory.Size = parse.cftable_entry.mem.win[0].len;
-		if (request_common_memory.Size < 0x1000)
-			request_common_memory.Size = 0x1000;
-		request_common_memory.AccessSpeed = 0;
+		ipw->request_common_memory.Size = parse.cftable_entry.mem.win[0].len;
+		if (ipw->request_common_memory.Size < 0x1000)
+			ipw->request_common_memory.Size = 0x1000;
+		ipw->request_common_memory.AccessSpeed = 0;
 
-		ret = pcmcia_request_window(&link, &request_common_memory,
+		ret = pcmcia_request_window(&link, &ipw->request_common_memory,
 				&ipw->handle_common_memory);
 
 		if (ret != CS_SUCCESS) {
@@ -246,16 +247,18 @@ static int config_ipwireless(struct ipw_dev *ipw)
 		ipw->is_v2_card =
 			parse.cftable_entry.mem.win[0].len == 0x100;
 
-		ipw->common_memory = ioremap(request_common_memory.Base,
-				request_common_memory.Size);
+		ipw->common_memory = ioremap(ipw->request_common_memory.Base,
+				ipw->request_common_memory.Size);
+		request_mem_region(ipw->request_common_memory.Base,
+				ipw->request_common_memory.Size, IPWIRELESS_PCCARD_NAME);
 
-		request_attr_memory.Attributes =
+		ipw->request_attr_memory.Attributes =
 			WIN_DATA_WIDTH_16 | WIN_MEMORY_TYPE_AM | WIN_ENABLE;
-		request_attr_memory.Base = 0;
-		request_attr_memory.Size = 0;	/* this used to be 0x1000 */
-		request_attr_memory.AccessSpeed = 0;
+		ipw->request_attr_memory.Base = 0;
+		ipw->request_attr_memory.Size = 0;	/* this used to be 0x1000 */
+		ipw->request_attr_memory.AccessSpeed = 0;
 
-		ret = pcmcia_request_window(&link, &request_attr_memory,
+		ret = pcmcia_request_window(&link, &ipw->request_attr_memory,
 				&ipw->handle_attr_memory);
 
 		if (ret != CS_SUCCESS) {
@@ -274,8 +277,10 @@ static int config_ipwireless(struct ipw_dev *ipw)
 			goto exit2;
 		}
 
-		ipw->attr_memory = ioremap(request_attr_memory.Base,
-				request_attr_memory.Size);
+		ipw->attr_memory = ioremap(ipw->request_attr_memory.Base,
+				ipw->request_attr_memory.Size);
+		request_mem_region(ipw->request_attr_memory.Base, ipw->request_attr_memory.Size,
+				IPWIRELESS_PCCARD_NAME);
 	}
 
 	INIT_WORK(&ipw->work_reboot, signalled_reboot_work);
@@ -311,14 +316,13 @@ static int config_ipwireless(struct ipw_dev *ipw)
 			(unsigned int) link->irq.AssignedIRQ);
 	if (ipw->attr_memory && ipw->common_memory)
 		printk(KERN_INFO IPWIRELESS_PCCARD_NAME
-				": attr memory 0x%08lx-0x%08lx, "
-				"common memory 0x%08lx-0x%08lx\n",
-				request_attr_memory.Base,
-				request_attr_memory.Base
-				+ request_attr_memory.Size - 1,
-				request_common_memory.Base,
-				request_common_memory.Base
-				+ request_common_memory.Size - 1);
+			": attr memory 0x%08lx-0x%08lx, common memory 0x%08lx-0x%08lx\n",
+			ipw->request_attr_memory.Base,
+			ipw->request_attr_memory.Base
+			+ ipw->request_attr_memory.Size - 1,
+			ipw->request_common_memory.Base,
+			ipw->request_common_memory.Base
+			+ ipw->request_common_memory.Size - 1);
 
 	ipw->network = ipwireless_network_create(ipw->hardware);
 	if (!ipw->network)
@@ -350,12 +354,16 @@ exit4:
 	pcmcia_disable_device(link);
 exit3:
 	if (ipw->attr_memory) {
+		release_mem_region(ipw->request_attr_memory.Base,
+				ipw->request_attr_memory.Size);
 		iounmap(ipw->attr_memory);
 		pcmcia_release_window(ipw->handle_attr_memory);
 		pcmcia_disable_device(link);
 	}
 exit2:
 	if (ipw->common_memory) {
+		release_mem_region(ipw->request_common_memory.Base,
+				ipw->request_common_memory.Size);
 		iounmap(ipw->common_memory);
 		pcmcia_release_window(ipw->handle_common_memory);
 	}
@@ -367,19 +375,25 @@ exit0:
 
 static void release_ipwireless(struct ipw_dev *ipw)
 {
-	struct pcmcia_device *link = ipw->link;
-
-	pcmcia_disable_device(link);
+	pcmcia_disable_device(ipw->link);
 
-	if (ipw->common_memory)
+	if (ipw->common_memory) {
+		release_mem_region(ipw->request_common_memory.Base,
+				ipw->request_common_memory.Size);
 		iounmap(ipw->common_memory);
-	if (ipw->attr_memory)
+	}
+	if (ipw->attr_memory) {
+		release_mem_region(ipw->request_attr_memory.Base,
+				ipw->request_attr_memory.Size);
 		iounmap(ipw->attr_memory);
+	}
 	if (ipw->common_memory)
 		pcmcia_release_window(ipw->handle_common_memory);
 	if (ipw->attr_memory)
 		pcmcia_release_window(ipw->handle_attr_memory);
-	pcmcia_disable_device(link);
+
+	/* Break the link with Card Services */
+	pcmcia_disable_device(ipw->link);
 }
 
 /*
@@ -437,10 +451,6 @@ static void ipwireless_detach(struct pcmcia_device *link)
 
 	release_ipwireless(ipw);
 
-	/* Break the link with Card Services */
-	if (link)
-		pcmcia_disable_device(link);
-
 	if (ipw->tty != NULL)
 		ipwireless_tty_free(ipw->tty);
 	if (ipw->network != NULL)
diff --git a/drivers/char/pcmcia/ipwireless/main.h b/drivers/char/pcmcia/ipwireless/main.h
index 1bfdcc8d47d6..0e0363af9ab2 100644
--- a/drivers/char/pcmcia/ipwireless/main.h
+++ b/drivers/char/pcmcia/ipwireless/main.h
@@ -45,10 +45,15 @@ struct ipw_tty;
 struct ipw_dev {
 	struct pcmcia_device *link;
 	int is_v2_card;
+
 	window_handle_t handle_attr_memory;
 	void __iomem *attr_memory;
+	win_req_t request_attr_memory;
+
 	window_handle_t handle_common_memory;
 	void __iomem *common_memory;
+	win_req_t request_common_memory;
+
 	dev_node_t nodes[2];
 	/* Reference to attribute memory, containing CIS data */
 	void *attribute_memory;
diff --git a/drivers/char/pcmcia/ipwireless/network.c b/drivers/char/pcmcia/ipwireless/network.c
index fe914d34f7f6..590762a7f217 100644
--- a/drivers/char/pcmcia/ipwireless/network.c
+++ b/drivers/char/pcmcia/ipwireless/network.c
@@ -29,7 +29,6 @@
 #include "main.h"
 #include "tty.h"
 
-#define MAX_OUTGOING_PACKETS_QUEUED   ipwireless_out_queue
 #define MAX_ASSOCIATED_TTYS 2
 
 #define SC_RCV_BITS     (SC_RCV_B7_1|SC_RCV_B7_0|SC_RCV_ODDP|SC_RCV_EVNP)
@@ -46,7 +45,7 @@ struct ipw_network {
 	/* Number of packets queued up in hardware module. */
 	int outgoing_packets_queued;
 	/* Spinlock to avoid interrupts during shutdown */
-	spinlock_t spinlock;
+	spinlock_t lock;
 	struct mutex close_lock;
 
 	/* PPP ioctl data, not actually used anywere */
@@ -68,20 +67,20 @@ static void notify_packet_sent(void *callback_data, unsigned int packet_length)
 	struct ipw_network *network = callback_data;
 	unsigned long flags;
 
-	spin_lock_irqsave(&network->spinlock, flags);
+	spin_lock_irqsave(&network->lock, flags);
 	network->outgoing_packets_queued--;
 	if (network->ppp_channel != NULL) {
 		if (network->ppp_blocked) {
 			network->ppp_blocked = 0;
-			spin_unlock_irqrestore(&network->spinlock, flags);
+			spin_unlock_irqrestore(&network->lock, flags);
 			ppp_output_wakeup(network->ppp_channel);
 			if (ipwireless_debug)
-				printk(KERN_INFO IPWIRELESS_PCCARD_NAME
+				printk(KERN_DEBUG IPWIRELESS_PCCARD_NAME
 				       ": ppp unblocked\n");
 		} else
-			spin_unlock_irqrestore(&network->spinlock, flags);
+			spin_unlock_irqrestore(&network->lock, flags);
 	} else
-		spin_unlock_irqrestore(&network->spinlock, flags);
+		spin_unlock_irqrestore(&network->lock, flags);
 }
 
 /*
@@ -93,8 +92,8 @@ static int ipwireless_ppp_start_xmit(struct ppp_channel *ppp_channel,
 	struct ipw_network *network = ppp_channel->private;
 	unsigned long flags;
 
-	spin_lock_irqsave(&network->spinlock, flags);
-	if (network->outgoing_packets_queued < MAX_OUTGOING_PACKETS_QUEUED) {
+	spin_lock_irqsave(&network->lock, flags);
+	if (network->outgoing_packets_queued < ipwireless_out_queue) {
 		unsigned char *buf;
 		static unsigned char header[] = {
 			PPP_ALLSTATIONS, /* 0xff */
@@ -103,7 +102,7 @@ static int ipwireless_ppp_start_xmit(struct ppp_channel *ppp_channel,
 		int ret;
 
 		network->outgoing_packets_queued++;
-		spin_unlock_irqrestore(&network->spinlock, flags);
+		spin_unlock_irqrestore(&network->lock, flags);
 
 		/*
 		 * If we have the requested amount of headroom in the skb we
@@ -144,7 +143,9 @@ static int ipwireless_ppp_start_xmit(struct ppp_channel *ppp_channel,
 		 * needs to be unblocked once we are ready to send.
 		 */
 		network->ppp_blocked = 1;
-		spin_unlock_irqrestore(&network->spinlock, flags);
+		spin_unlock_irqrestore(&network->lock, flags);
+		if (ipwireless_debug)
+			printk(KERN_DEBUG IPWIRELESS_PCCARD_NAME ": ppp blocked\n");
 		return 0;
 	}
 }
@@ -249,11 +250,11 @@ static void do_go_online(struct work_struct *work_go_online)
 				work_go_online);
 	unsigned long flags;
 
-	spin_lock_irqsave(&network->spinlock, flags);
+	spin_lock_irqsave(&network->lock, flags);
 	if (!network->ppp_channel) {
 		struct ppp_channel *channel;
 
-		spin_unlock_irqrestore(&network->spinlock, flags);
+		spin_unlock_irqrestore(&network->lock, flags);
 		channel = kzalloc(sizeof(struct ppp_channel), GFP_KERNEL);
 		if (!channel) {
 			printk(KERN_ERR IPWIRELESS_PCCARD_NAME
@@ -273,10 +274,10 @@ static void do_go_online(struct work_struct *work_go_online)
 		network->xaccm[3] = 0x60000000U;
 		network->raccm = ~0U;
 		ppp_register_channel(channel);
-		spin_lock_irqsave(&network->spinlock, flags);
+		spin_lock_irqsave(&network->lock, flags);
 		network->ppp_channel = channel;
 	}
-	spin_unlock_irqrestore(&network->spinlock, flags);
+	spin_unlock_irqrestore(&network->lock, flags);
 }
 
 static void do_go_offline(struct work_struct *work_go_offline)
@@ -287,16 +288,16 @@ static void do_go_offline(struct work_struct *work_go_offline)
 	unsigned long flags;
 
 	mutex_lock(&network->close_lock);
-	spin_lock_irqsave(&network->spinlock, flags);
+	spin_lock_irqsave(&network->lock, flags);
 	if (network->ppp_channel != NULL) {
 		struct ppp_channel *channel = network->ppp_channel;
 
 		network->ppp_channel = NULL;
-		spin_unlock_irqrestore(&network->spinlock, flags);
+		spin_unlock_irqrestore(&network->lock, flags);
 		mutex_unlock(&network->close_lock);
 		ppp_unregister_channel(channel);
 	} else {
-		spin_unlock_irqrestore(&network->spinlock, flags);
+		spin_unlock_irqrestore(&network->lock, flags);
 		mutex_unlock(&network->close_lock);
 	}
 }
@@ -381,18 +382,18 @@ void ipwireless_network_packet_received(struct ipw_network *network,
 			 * the PPP layer.
 			 */
 			mutex_lock(&network->close_lock);
-			spin_lock_irqsave(&network->spinlock, flags);
+			spin_lock_irqsave(&network->lock, flags);
 			if (network->ppp_channel != NULL) {
 				struct sk_buff *skb;
 
-				spin_unlock_irqrestore(&network->spinlock,
+				spin_unlock_irqrestore(&network->lock,
 						flags);
 
 				/* Send the data to the ppp_generic module. */
 				skb = ipw_packet_received_skb(data, length);
 				ppp_input(network->ppp_channel, skb);
 			} else
-				spin_unlock_irqrestore(&network->spinlock,
+				spin_unlock_irqrestore(&network->lock,
 						flags);
 			mutex_unlock(&network->close_lock);
 		}
@@ -410,7 +411,7 @@ struct ipw_network *ipwireless_network_create(struct ipw_hardware *hw)
 	if (!network)
 		return NULL;
 
-	spin_lock_init(&network->spinlock);
+	spin_lock_init(&network->lock);
 	mutex_init(&network->close_lock);
 
 	network->hardware = hw;
@@ -478,10 +479,10 @@ int ipwireless_ppp_channel_index(struct ipw_network *network)
 	int ret = -1;
 	unsigned long flags;
 
-	spin_lock_irqsave(&network->spinlock, flags);
+	spin_lock_irqsave(&network->lock, flags);
 	if (network->ppp_channel != NULL)
 		ret = ppp_channel_index(network->ppp_channel);
-	spin_unlock_irqrestore(&network->spinlock, flags);
+	spin_unlock_irqrestore(&network->lock, flags);
 
 	return ret;
 }
@@ -491,10 +492,15 @@ int ipwireless_ppp_unit_number(struct ipw_network *network)
 	int ret = -1;
 	unsigned long flags;
 
-	spin_lock_irqsave(&network->spinlock, flags);
+	spin_lock_irqsave(&network->lock, flags);
 	if (network->ppp_channel != NULL)
 		ret = ppp_unit_number(network->ppp_channel);
-	spin_unlock_irqrestore(&network->spinlock, flags);
+	spin_unlock_irqrestore(&network->lock, flags);
 
 	return ret;
 }
+
+int ipwireless_ppp_mru(const struct ipw_network *network)
+{
+	return network->mru;
+}
diff --git a/drivers/char/pcmcia/ipwireless/network.h b/drivers/char/pcmcia/ipwireless/network.h
index ccacd26fc7ef..561f765b3334 100644
--- a/drivers/char/pcmcia/ipwireless/network.h
+++ b/drivers/char/pcmcia/ipwireless/network.h
@@ -48,5 +48,6 @@ void ipwireless_ppp_open(struct ipw_network *net);
 void ipwireless_ppp_close(struct ipw_network *net);
 int ipwireless_ppp_channel_index(struct ipw_network *net);
 int ipwireless_ppp_unit_number(struct ipw_network *net);
+int ipwireless_ppp_mru(const struct ipw_network *net);
 
 #endif
diff --git a/drivers/char/pcmcia/ipwireless/tty.c b/drivers/char/pcmcia/ipwireless/tty.c
index 42f3815c5ce3..3a23e7694d55 100644
--- a/drivers/char/pcmcia/ipwireless/tty.c
+++ b/drivers/char/pcmcia/ipwireless/tty.c
@@ -29,7 +29,6 @@
 #include <linux/tty_driver.h>
 #include <linux/tty_flip.h>
 #include <linux/uaccess.h>
-#include <linux/version.h>
 
 #include "tty.h"
 #include "network.h"
@@ -259,7 +258,7 @@ static int ipw_write(struct tty_struct *linux_tty,
 	}
 
 	ret = ipwireless_send_packet(tty->hardware, IPW_CHANNEL_RAS,
-			       (unsigned char *) buf, count,
+			       buf, count,
 			       ipw_write_packet_sent_callback, tty);
 	if (ret == -1) {
 		mutex_unlock(&tty->ipw_tty_mutex);
diff --git a/drivers/char/pcmcia/synclink_cs.c b/drivers/char/pcmcia/synclink_cs.c
index d1fceabe3aef..c240562c218b 100644
--- a/drivers/char/pcmcia/synclink_cs.c
+++ b/drivers/char/pcmcia/synclink_cs.c
@@ -232,7 +232,6 @@ typedef struct _mgslpc_info {
 
 	/* SPPP/Cisco HDLC device parts */
 	int netcount;
-	int dosyncppp;
 	spinlock_t netlock;
 
 #if SYNCLINK_GENERIC_HDLC
@@ -459,13 +458,11 @@ static int ttymajor=0;
 
 static int debug_level = 0;
 static int maxframe[MAX_DEVICE_COUNT] = {0,};
-static int dosyncppp[MAX_DEVICE_COUNT] = {1,1,1,1};
 
 module_param(break_on_load, bool, 0);
 module_param(ttymajor, int, 0);
 module_param(debug_level, int, 0);
 module_param_array(maxframe, int, NULL, 0);
-module_param_array(dosyncppp, int, NULL, 0);
 
 MODULE_LICENSE("GPL");
 
@@ -2915,7 +2912,6 @@ static void mgslpc_add_device(MGSLPC_INFO *info)
 	if (info->line < MAX_DEVICE_COUNT) {
 		if (maxframe[info->line])
 			info->max_frame_size = maxframe[info->line];
-		info->dosyncppp = dosyncppp[info->line];
 	}
 
 	mgslpc_device_count++;
diff --git a/drivers/char/ppdev.c b/drivers/char/ppdev.c
index 7af7a7e6b9c2..bee39fdfba73 100644
--- a/drivers/char/ppdev.c
+++ b/drivers/char/ppdev.c
@@ -67,7 +67,7 @@
 #include <linux/major.h>
 #include <linux/ppdev.h>
 #include <linux/smp_lock.h>
-#include <asm/uaccess.h>
+#include <linux/uaccess.h>
 
 #define PP_VERSION "ppdev: user-space parallel port driver"
 #define CHRDEV "ppdev"
@@ -328,10 +328,9 @@ static enum ieee1284_phase init_phase (int mode)
 	return IEEE1284_PH_FWD_IDLE;
 }
 
-static int pp_ioctl(struct inode *inode, struct file *file,
-		    unsigned int cmd, unsigned long arg)
+static int pp_do_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
 {
-	unsigned int minor = iminor(inode);
+	unsigned int minor = iminor(file->f_path.dentry->d_inode);
 	struct pp_struct *pp = file->private_data;
 	struct parport * port;
 	void __user *argp = (void __user *)arg;
@@ -634,6 +633,15 @@ static int pp_ioctl(struct inode *inode, struct file *file,
 	return 0;
 }
 
+static long pp_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
+{
+	long ret;
+	lock_kernel();
+	ret = pp_do_ioctl(file, cmd, arg);
+	unlock_kernel();
+	return ret;
+}
+
 static int pp_open (struct inode * inode, struct file * file)
 {
 	unsigned int minor = iminor(inode);
@@ -745,7 +753,7 @@ static const struct file_operations pp_fops = {
 	.read		= pp_read,
 	.write		= pp_write,
 	.poll		= pp_poll,
-	.ioctl		= pp_ioctl,
+	.unlocked_ioctl	= pp_ioctl,
 	.open		= pp_open,
 	.release	= pp_release,
 };
diff --git a/drivers/char/random.c b/drivers/char/random.c
index e0d0e371909c..7ce1ac4baa6d 100644
--- a/drivers/char/random.c
+++ b/drivers/char/random.c
@@ -407,7 +407,7 @@ struct entropy_store {
 	/* read-write data: */
 	spinlock_t lock;
 	unsigned add_ptr;
-	int entropy_count;
+	int entropy_count;	/* Must at no time exceed ->POOLBITS! */
 	int input_rotate;
 };
 
@@ -520,6 +520,7 @@ static void mix_pool_bytes(struct entropy_store *r, const void *in, int bytes)
 static void credit_entropy_bits(struct entropy_store *r, int nbits)
 {
 	unsigned long flags;
+	int entropy_count;
 
 	if (!nbits)
 		return;
@@ -527,20 +528,20 @@ static void credit_entropy_bits(struct entropy_store *r, int nbits)
 	spin_lock_irqsave(&r->lock, flags);
 
 	DEBUG_ENT("added %d entropy credits to %s\n", nbits, r->name);
-	r->entropy_count += nbits;
-	if (r->entropy_count < 0) {
+	entropy_count = r->entropy_count;
+	entropy_count += nbits;
+	if (entropy_count < 0) {
 		DEBUG_ENT("negative entropy/overflow\n");
-		r->entropy_count = 0;
-	} else if (r->entropy_count > r->poolinfo->POOLBITS)
-		r->entropy_count = r->poolinfo->POOLBITS;
+		entropy_count = 0;
+	} else if (entropy_count > r->poolinfo->POOLBITS)
+		entropy_count = r->poolinfo->POOLBITS;
+	r->entropy_count = entropy_count;
 
 	/* should we wake readers? */
-	if (r == &input_pool &&
-	    r->entropy_count >= random_read_wakeup_thresh) {
+	if (r == &input_pool && entropy_count >= random_read_wakeup_thresh) {
 		wake_up_interruptible(&random_read_wait);
 		kill_fasync(&fasync, SIGIO, POLL_IN);
 	}
-
 	spin_unlock_irqrestore(&r->lock, flags);
 }
 
@@ -1571,6 +1572,7 @@ u32 secure_ipv4_port_ephemeral(__be32 saddr, __be32 daddr, __be16 dport)
 
 	return half_md4_transform(hash, keyptr->secret);
 }
+EXPORT_SYMBOL_GPL(secure_ipv4_port_ephemeral);
 
 #if defined(CONFIG_IPV6) || defined(CONFIG_IPV6_MODULE)
 u32 secure_ipv6_port_ephemeral(const __be32 *saddr, const __be32 *daddr,
diff --git a/drivers/char/rio/rio_linux.c b/drivers/char/rio/rio_linux.c
index 0cdfee152916..a8f68a3f14dd 100644
--- a/drivers/char/rio/rio_linux.c
+++ b/drivers/char/rio/rio_linux.c
@@ -179,7 +179,7 @@ static int rio_set_real_termios(void *ptr);
 static void rio_hungup(void *ptr);
 static void rio_close(void *ptr);
 static int rio_chars_in_buffer(void *ptr);
-static int rio_fw_ioctl(struct inode *inode, struct file *filp, unsigned int cmd, unsigned long arg);
+static long rio_fw_ioctl(struct file *filp, unsigned int cmd, unsigned long arg);
 static int rio_init_drivers(void);
 
 static void my_hd(void *addr, int len);
@@ -240,7 +240,7 @@ static struct real_driver rio_real_driver = {
 
 static const struct file_operations rio_fw_fops = {
 	.owner = THIS_MODULE,
-	.ioctl = rio_fw_ioctl,
+	.unlocked_ioctl = rio_fw_ioctl,
 };
 
 static struct miscdevice rio_fw_device = {
@@ -560,13 +560,15 @@ static void rio_close(void *ptr)
 
 
 
-static int rio_fw_ioctl(struct inode *inode, struct file *filp, unsigned int cmd, unsigned long arg)
+static long rio_fw_ioctl(struct file *filp, unsigned int cmd, unsigned long arg)
 {
 	int rc = 0;
 	func_enter();
 
 	/* The "dev" argument isn't used. */
+	lock_kernel();
 	rc = riocontrol(p, 0, cmd, arg, capable(CAP_SYS_ADMIN));
+	unlock_kernel();
 
 	func_exit();
 	return rc;
diff --git a/drivers/char/rtc.c b/drivers/char/rtc.c
index dbefbb30ed44..f53d4d00faf0 100644
--- a/drivers/char/rtc.c
+++ b/drivers/char/rtc.c
@@ -78,7 +78,6 @@
 #include <linux/wait.h>
 #include <linux/bcd.h>
 #include <linux/delay.h>
-#include <linux/smp_lock.h>
 #include <linux/uaccess.h>
 
 #include <asm/current.h>
@@ -144,6 +143,7 @@ static ssize_t rtc_read(struct file *file, char __user *buf,
 			size_t count, loff_t *ppos);
 
 static long rtc_ioctl(struct file *file, unsigned int cmd, unsigned long arg);
+static void rtc_get_rtc_time(struct rtc_time *rtc_tm);
 
 #ifdef RTC_IRQ
 static unsigned int rtc_poll(struct file *file, poll_table *wait);
@@ -235,7 +235,7 @@ static inline unsigned char rtc_is_updating(void)
  *	(See ./arch/XXXX/kernel/time.c for the set_rtc_mmss() function.)
  */
 
-irqreturn_t rtc_interrupt(int irq, void *dev_id)
+static irqreturn_t rtc_interrupt(int irq, void *dev_id)
 {
 	/*
 	 *	Can be an alarm interrupt, update complete interrupt,
@@ -1303,7 +1303,7 @@ static int rtc_proc_open(struct inode *inode, struct file *file)
 }
 #endif
 
-void rtc_get_rtc_time(struct rtc_time *rtc_tm)
+static void rtc_get_rtc_time(struct rtc_time *rtc_tm)
 {
 	unsigned long uip_watchdog = jiffies, flags;
 	unsigned char ctrl;
diff --git a/drivers/char/ser_a2232.c b/drivers/char/ser_a2232.c
index 4ba3aec9e1cd..7b0c35207d9b 100644
--- a/drivers/char/ser_a2232.c
+++ b/drivers/char/ser_a2232.c
@@ -192,7 +192,7 @@ static inline void a2232_receive_char(struct a2232_port *port, int ch, int err)
 	Maybe one could implement a more efficient version by not only
 	transferring one character at a time.
 */
-	struct tty_struct *tty = port->gs.tty;
+	struct tty_struct *tty = port->gs.port.tty;
 
 #if 0
 	switch(err) {
@@ -226,7 +226,7 @@ static void a2232_disable_tx_interrupts(void *ptr)
 
 	/* Does this here really have to be? */
 	local_irq_save(flags);
-	port->gs.flags &= ~GS_TX_INTEN;
+	port->gs.port.flags &= ~GS_TX_INTEN;
 	local_irq_restore(flags);
 }
 
@@ -242,7 +242,7 @@ static void a2232_enable_tx_interrupts(void *ptr)
 
 	/* Does this here really have to be? */
 	local_irq_save(flags);
-	port->gs.flags |= GS_TX_INTEN;
+	port->gs.port.flags |= GS_TX_INTEN;
 	local_irq_restore(flags);
 }
 
@@ -276,9 +276,9 @@ static void a2232_shutdown_port(void *ptr)
 
 	local_irq_save(flags);
 
-	port->gs.flags &= ~GS_ACTIVE;
+	port->gs.port.flags &= ~GS_ACTIVE;
 	
-	if (port->gs.tty && port->gs.tty->termios->c_cflag & HUPCL) {
+	if (port->gs.port.tty && port->gs.port.tty->termios->c_cflag & HUPCL) {
 		/* Set DTR and RTS to Low, flush output.
 		   The NetBSD driver "msc.c" does it this way. */
 		stat->Command = (	(stat->Command & ~A2232CMD_CMask) | 
@@ -309,7 +309,7 @@ static int  a2232_set_real_termios(void *ptr)
 	volatile struct a2232status *status;
 	volatile struct a2232memory *mem;
 
-	if (!port->gs.tty || !port->gs.tty->termios) return 0;
+	if (!port->gs.port.tty || !port->gs.port.tty->termios) return 0;
 
 	status = a2232stat(port->which_a2232, port->which_port_on_a2232);
 	mem = a2232mem(port->which_a2232);
@@ -345,7 +345,7 @@ static int  a2232_set_real_termios(void *ptr)
 	}
 	a2232_param |= rate;
 
-	cflag  = port->gs.tty->termios->c_cflag;
+	cflag  = port->gs.port.tty->termios->c_cflag;
 
 	// get character size
 	chsize = cflag & CSIZE;
@@ -382,7 +382,7 @@ static int  a2232_set_real_termios(void *ptr)
 		the conventional way of inserting START/STOP characters
 		by hand in throttle()/unthrottle().
 	*/
-	softflow = !!( port->gs.tty->termios->c_iflag & IXOFF );
+	softflow = !!( port->gs.port.tty->termios->c_iflag & IXOFF );
 
 	// get Parity (Enabled/Disabled? If Enabled, Odd or Even?)
 	parity = cflag & (PARENB | PARODD);
@@ -400,9 +400,9 @@ static int  a2232_set_real_termios(void *ptr)
 	/*	Hmm. Maybe an own a2232_port structure
 		member would be cleaner?	*/
 	if (cflag & CLOCAL)
-		port->gs.flags &= ~ASYNC_CHECK_CD;
+		port->gs.port.flags &= ~ASYNC_CHECK_CD;
 	else
-		port->gs.flags |= ASYNC_CHECK_CD;
+		port->gs.port.flags |= ASYNC_CHECK_CD;
 
 
 	/* Now we have all parameters and can go to set them: */
@@ -482,18 +482,18 @@ static int  a2232_open(struct tty_struct * tty, struct file * filp)
 	port = &a2232_ports[line];
 	
 	tty->driver_data = port;
-	port->gs.tty = tty;
-	port->gs.count++;
+	port->gs.port.tty = tty;
+	port->gs.port.count++;
 	retval = gs_init_port(&port->gs);
 	if (retval) {
-		port->gs.count--;
+		port->gs.port.count--;
 		return retval;
 	}
-	port->gs.flags |= GS_ACTIVE;
+	port->gs.port.flags |= GS_ACTIVE;
 	retval = gs_block_til_ready(port, filp);
 
 	if (retval) {
-		port->gs.count--;
+		port->gs.port.count--;
 		return retval;
 	}
 
@@ -522,7 +522,7 @@ int ch, err, n, p;
 		for (p = 0; p < NUMLINES; p++){	/* for every port on this board */
 			err = 0;
 			port = &a2232_ports[n*NUMLINES+p];
-			if ( port->gs.flags & GS_ACTIVE ){ /* if the port is used */
+			if ( port->gs.port.flags & GS_ACTIVE ){ /* if the port is used */
 
 				status = a2232stat(n,p);
 
@@ -577,8 +577,8 @@ int ch, err, n, p;
 				obuf = mem->OutBuf[p];
 				bufpos = status->OutHead;
 				while ( (port->gs.xmit_cnt > 0)		&&
-					(!port->gs.tty->stopped)	&&
-					(!port->gs.tty->hw_stopped) ){	/* While there are chars to transmit */
+					(!port->gs.port.tty->stopped)	&&
+					(!port->gs.port.tty->hw_stopped) ){	/* While there are chars to transmit */
 					if (((bufpos+1) & A2232_IOBUFLENMASK) != status->OutTail) { /* If the A2232 buffer is not full */
 						ch = port->gs.xmit_buf[port->gs.xmit_tail];					/* get the next char to transmit */
 						port->gs.xmit_tail = (port->gs.xmit_tail+1) & (SERIAL_XMIT_SIZE-1); /* modulo-addition for the gs.xmit_buf ring-buffer */
@@ -592,8 +592,8 @@ int ch, err, n, p;
 				status->OutHead = bufpos;
 					
 				/* WakeUp if output buffer runs low */
-				if ((port->gs.xmit_cnt <= port->gs.wakeup_chars) && port->gs.tty) {
-					tty_wakeup(port->gs.tty);
+				if ((port->gs.xmit_cnt <= port->gs.wakeup_chars) && port->gs.port.tty) {
+					tty_wakeup(port->gs.port.tty);
 				}
 			} // if the port is used
 		} // for every port on the board
@@ -613,16 +613,16 @@ int ch, err, n, p;
 						struct a2232_port *port = &a2232_ports[n*7+p];
 						port->cd_status = !(ncd & 1); /* ncd&1 <=> CD is now off */
 
-						if (!(port->gs.flags & ASYNC_CHECK_CD))
+						if (!(port->gs.port.flags & ASYNC_CHECK_CD))
 							;	/* Don't report DCD changes */
 						else if (port->cd_status) { // if DCD on: DCD went UP!
 							
 							/* Are we blocking in open?*/
-							wake_up_interruptible(&port->gs.open_wait);
+							wake_up_interruptible(&port->gs.port.open_wait);
 						}
 						else { // if DCD off: DCD went DOWN!
-							if (port->gs.tty)
-								tty_hangup (port->gs.tty);
+							if (port->gs.port.tty)
+								tty_hangup (port->gs.port.tty);
 						}
 						
 					} // if CD changed for this port
@@ -655,8 +655,8 @@ static void a2232_init_portstructs(void)
 #ifdef NEW_WRITE_LOCKING
 		mutex_init(&(port->gs.port_write_mutex));
 #endif
-		init_waitqueue_head(&port->gs.open_wait);
-		init_waitqueue_head(&port->gs.close_wait);
+		init_waitqueue_head(&port->gs.port.open_wait);
+		init_waitqueue_head(&port->gs.port.close_wait);
 	}
 }
 
diff --git a/drivers/char/sx.c b/drivers/char/sx.c
index 2162439bbe48..c385206f9db5 100644
--- a/drivers/char/sx.c
+++ b/drivers/char/sx.c
@@ -286,8 +286,8 @@ static void sx_close(void *ptr);
 static int sx_chars_in_buffer(void *ptr);
 static int sx_init_board(struct sx_board *board);
 static int sx_init_portstructs(int nboards, int nports);
-static int sx_fw_ioctl(struct inode *inode, struct file *filp,
-		unsigned int cmd, unsigned long arg);
+static long sx_fw_ioctl(struct file *filp, unsigned int cmd,
+						unsigned long arg);
 static int sx_init_drivers(void);
 
 static struct tty_driver *sx_driver;
@@ -396,7 +396,7 @@ static struct real_driver sx_real_driver = {
 
 static const struct file_operations sx_fw_fops = {
 	.owner = THIS_MODULE,
-	.ioctl = sx_fw_ioctl,
+	.unlocked_ioctl = sx_fw_ioctl,
 };
 
 static struct miscdevice sx_fw_device = {
@@ -1686,10 +1686,10 @@ static int do_memtest_w(struct sx_board *board, int min, int max)
 }
 #endif
 
-static int sx_fw_ioctl(struct inode *inode, struct file *filp,
-		unsigned int cmd, unsigned long arg)
+static long sx_fw_ioctl(struct file *filp, unsigned int cmd,
+							unsigned long arg)
 {
-	int rc = 0;
+	long rc = 0;
 	int __user *descr = (int __user *)arg;
 	int i;
 	static struct sx_board *board = NULL;
@@ -1699,13 +1699,10 @@ static int sx_fw_ioctl(struct inode *inode, struct file *filp,
 
 	func_enter();
 
-#if 0
-	/* Removed superuser check: Sysops can use the permissions on the device
-	   file to restrict access. Recommendation: Root only. (root.root 600) */
-	if (!capable(CAP_SYS_ADMIN)) {
+	if (!capable(CAP_SYS_RAWIO))
 		return -EPERM;
-	}
-#endif
+
+	lock_kernel();
 
 	sx_dprintk(SX_DEBUG_FIRMWARE, "IOCTL %x: %lx\n", cmd, arg);
 
@@ -1720,19 +1717,23 @@ static int sx_fw_ioctl(struct inode *inode, struct file *filp,
 		for (i = 0; i < SX_NBOARDS; i++)
 			sx_dprintk(SX_DEBUG_FIRMWARE, "<%x> ", boards[i].flags);
 		sx_dprintk(SX_DEBUG_FIRMWARE, "\n");
+		unlock_kernel();
 		return -EIO;
 	}
 
 	switch (cmd) {
 	case SXIO_SET_BOARD:
 		sx_dprintk(SX_DEBUG_FIRMWARE, "set board to %ld\n", arg);
+		rc = -EIO;
 		if (arg >= SX_NBOARDS)
-			return -EIO;
+			break;
 		sx_dprintk(SX_DEBUG_FIRMWARE, "not out of range\n");
 		if (!(boards[arg].flags & SX_BOARD_PRESENT))
-			return -EIO;
+			break;
 		sx_dprintk(SX_DEBUG_FIRMWARE, ".. and present!\n");
 		board = &boards[arg];
+		rc = 0;
+		/* FIXME: And this does ... nothing?? */
 		break;
 	case SXIO_GET_TYPE:
 		rc = -ENOENT;	/* If we manage to miss one, return error. */
@@ -1746,7 +1747,7 @@ static int sx_fw_ioctl(struct inode *inode, struct file *filp,
 			rc = SX_TYPE_SI;
 		if (IS_EISA_BOARD(board))
 			rc = SX_TYPE_SI;
-		sx_dprintk(SX_DEBUG_FIRMWARE, "returning type= %d\n", rc);
+		sx_dprintk(SX_DEBUG_FIRMWARE, "returning type= %ld\n", rc);
 		break;
 	case SXIO_DO_RAMTEST:
 		if (sx_initialized)	/* Already initialized: better not ramtest the board.  */
@@ -1760,19 +1761,26 @@ static int sx_fw_ioctl(struct inode *inode, struct file *filp,
 			rc = do_memtest(board, 0, 0x7ff8);
 			/* if (!rc) rc = do_memtest_w (board, 0, 0x7ff8); */
 		}
-		sx_dprintk(SX_DEBUG_FIRMWARE, "returning memtest result= %d\n",
-			   rc);
+		sx_dprintk(SX_DEBUG_FIRMWARE,
+				"returning memtest result= %ld\n", rc);
 		break;
 	case SXIO_DOWNLOAD:
-		if (sx_initialized)	/* Already initialized */
-			return -EEXIST;
-		if (!sx_reset(board))
-			return -EIO;
+		if (sx_initialized) {/* Already initialized */
+			rc = -EEXIST;
+			break;
+		}
+		if (!sx_reset(board)) {
+			rc = -EIO;
+			break;
+		}
 		sx_dprintk(SX_DEBUG_INIT, "reset the board...\n");
 
 		tmp = kmalloc(SX_CHUNK_SIZE, GFP_USER);
-		if (!tmp)
-			return -ENOMEM;
+		if (!tmp) {
+			rc = -ENOMEM;
+			break;
+		}
+		/* FIXME: check returns */
 		get_user(nbytes, descr++);
 		get_user(offset, descr++);
 		get_user(data, descr++);
@@ -1782,7 +1790,8 @@ static int sx_fw_ioctl(struct inode *inode, struct file *filp,
 						(i + SX_CHUNK_SIZE > nbytes) ?
 						nbytes - i : SX_CHUNK_SIZE)) {
 					kfree(tmp);
-					return -EFAULT;
+					rc = -EFAULT;
+					break;
 				}
 				memcpy_toio(board->base2 + offset + i, tmp,
 						(i + SX_CHUNK_SIZE > nbytes) ?
@@ -1798,13 +1807,17 @@ static int sx_fw_ioctl(struct inode *inode, struct file *filp,
 		rc = sx_nports;
 		break;
 	case SXIO_INIT:
-		if (sx_initialized)	/* Already initialized */
-			return -EEXIST;
+		if (sx_initialized) {	/* Already initialized */
+			rc = -EEXIST;
+			break;
+		}
 		/* This is not allowed until all boards are initialized... */
 		for (i = 0; i < SX_NBOARDS; i++) {
 			if ((boards[i].flags & SX_BOARD_PRESENT) &&
-				!(boards[i].flags & SX_BOARD_INITIALIZED))
-				return -EIO;
+				!(boards[i].flags & SX_BOARD_INITIALIZED)) {
+				rc = -EIO;
+				break;
+			}
 		}
 		for (i = 0; i < SX_NBOARDS; i++)
 			if (!(boards[i].flags & SX_BOARD_PRESENT))
@@ -1832,10 +1845,10 @@ static int sx_fw_ioctl(struct inode *inode, struct file *filp,
 		rc = sx_nports;
 		break;
 	default:
-		printk(KERN_WARNING "Unknown ioctl on firmware device (%x).\n",
-				cmd);
+		rc = -ENOTTY;
 		break;
 	}
+	unlock_kernel();
 	func_exit();
 	return rc;
 }
diff --git a/drivers/char/synclink.c b/drivers/char/synclink.c
index ef6706f09061..500f5176b6ba 100644
--- a/drivers/char/synclink.c
+++ b/drivers/char/synclink.c
@@ -304,7 +304,6 @@ struct mgsl_struct {
 
 	/* generic HDLC device parts */
 	int netcount;
-	int dosyncppp;
 	spinlock_t netlock;
 
 #if SYNCLINK_GENERIC_HDLC
@@ -868,7 +867,6 @@ static int irq[MAX_ISA_DEVICES];
 static int dma[MAX_ISA_DEVICES];
 static int debug_level;
 static int maxframe[MAX_TOTAL_DEVICES];
-static int dosyncppp[MAX_TOTAL_DEVICES];
 static int txdmabufs[MAX_TOTAL_DEVICES];
 static int txholdbufs[MAX_TOTAL_DEVICES];
 	
@@ -879,7 +877,6 @@ module_param_array(irq, int, NULL, 0);
 module_param_array(dma, int, NULL, 0);
 module_param(debug_level, int, 0);
 module_param_array(maxframe, int, NULL, 0);
-module_param_array(dosyncppp, int, NULL, 0);
 module_param_array(txdmabufs, int, NULL, 0);
 module_param_array(txholdbufs, int, NULL, 0);
 
@@ -4258,7 +4255,6 @@ static void mgsl_add_device( struct mgsl_struct *info )
 	if (info->line < MAX_TOTAL_DEVICES) {
 		if (maxframe[info->line])
 			info->max_frame_size = maxframe[info->line];
-		info->dosyncppp = dosyncppp[info->line];
 
 		if (txdmabufs[info->line]) {
 			info->num_tx_dma_buffers = txdmabufs[info->line];
diff --git a/drivers/char/synclink_gt.c b/drivers/char/synclink_gt.c
index 3e9058993e41..08911ed66494 100644
--- a/drivers/char/synclink_gt.c
+++ b/drivers/char/synclink_gt.c
@@ -47,7 +47,6 @@
 
 
 #include <linux/module.h>
-#include <linux/version.h>
 #include <linux/errno.h>
 #include <linux/signal.h>
 #include <linux/sched.h>
@@ -128,17 +127,14 @@ static int slgt_device_count;
 static int ttymajor;
 static int debug_level;
 static int maxframe[MAX_DEVICES];
-static int dosyncppp[MAX_DEVICES];
 
 module_param(ttymajor, int, 0);
 module_param(debug_level, int, 0);
 module_param_array(maxframe, int, NULL, 0);
-module_param_array(dosyncppp, int, NULL, 0);
 
 MODULE_PARM_DESC(ttymajor, "TTY major device number override: 0=auto assigned");
 MODULE_PARM_DESC(debug_level, "Debug syslog output: 0=disabled, 1 to 5=increasing detail");
 MODULE_PARM_DESC(maxframe, "Maximum frame size used by device (4096 to 65535)");
-MODULE_PARM_DESC(dosyncppp, "Enable synchronous net device, 0=disable 1=enable");
 
 /*
  * tty support and callbacks
@@ -349,7 +345,6 @@ struct slgt_info {
 	/* SPPP/Cisco HDLC device parts */
 
 	int netcount;
-	int dosyncppp;
 	spinlock_t netlock;
 #if SYNCLINK_GENERIC_HDLC
 	struct net_device *netdev;
@@ -3405,7 +3400,6 @@ static void add_device(struct slgt_info *info)
 	if (info->line < MAX_DEVICES) {
 		if (maxframe[info->line])
 			info->max_frame_size = maxframe[info->line];
-		info->dosyncppp = dosyncppp[info->line];
 	}
 
 	slgt_device_count++;
diff --git a/drivers/char/synclinkmp.c b/drivers/char/synclinkmp.c
index c0490cbd0db2..6bdb44f7bec2 100644
--- a/drivers/char/synclinkmp.c
+++ b/drivers/char/synclinkmp.c
@@ -270,7 +270,6 @@ typedef struct _synclinkmp_info {
 
 	/* SPPP/Cisco HDLC device parts */
 	int netcount;
-	int dosyncppp;
 	spinlock_t netlock;
 
 #if SYNCLINK_GENERIC_HDLC
@@ -469,13 +468,11 @@ static int ttymajor = 0;
  */
 static int debug_level = 0;
 static int maxframe[MAX_DEVICES] = {0,};
-static int dosyncppp[MAX_DEVICES] = {0,};
 
 module_param(break_on_load, bool, 0);
 module_param(ttymajor, int, 0);
 module_param(debug_level, int, 0);
 module_param_array(maxframe, int, NULL, 0);
-module_param_array(dosyncppp, int, NULL, 0);
 
 static char *driver_name = "SyncLink MultiPort driver";
 static char *driver_version = "$Revision: 4.38 $";
@@ -3752,7 +3749,6 @@ static void add_device(SLMP_INFO *info)
 	if (info->line < MAX_DEVICES) {
 		if (maxframe[info->line])
 			info->max_frame_size = maxframe[info->line];
-		info->dosyncppp = dosyncppp[info->line];
 	}
 
 	synclinkmp_device_count++;
diff --git a/drivers/char/tpm/tpm.c b/drivers/char/tpm/tpm.c
index e1fc193d9396..ae766d868454 100644
--- a/drivers/char/tpm/tpm.c
+++ b/drivers/char/tpm/tpm.c
@@ -580,91 +580,133 @@ void tpm_continue_selftest(struct tpm_chip *chip)
 }
 EXPORT_SYMBOL_GPL(tpm_continue_selftest);
 
+#define  TPM_INTERNAL_RESULT_SIZE 200
+
 ssize_t tpm_show_enabled(struct device * dev, struct device_attribute * attr,
 			char *buf)
 {
-	u8 data[max_t(int, ARRAY_SIZE(tpm_cap), 35)];
+	u8 *data;
 	ssize_t rc;
 
 	struct tpm_chip *chip = dev_get_drvdata(dev);
 	if (chip == NULL)
 		return -ENODEV;
 
+	data = kzalloc(TPM_INTERNAL_RESULT_SIZE, GFP_KERNEL);
+	if (!data)
+		return -ENOMEM;
+
 	memcpy(data, tpm_cap, sizeof(tpm_cap));
 	data[TPM_CAP_IDX] = TPM_CAP_FLAG;
 	data[TPM_CAP_SUBCAP_IDX] = TPM_CAP_FLAG_PERM;
 
-	rc = transmit_cmd(chip, data, sizeof(data),
-			"attemtping to determine the permanent state");
-	if (rc)
+	rc = transmit_cmd(chip, data, TPM_INTERNAL_RESULT_SIZE,
+			"attemtping to determine the permanent enabled state");
+	if (rc) {
+		kfree(data);
 		return 0;
-	return sprintf(buf, "%d\n", !data[TPM_GET_CAP_PERM_DISABLE_IDX]);
+	}
+
+	rc = sprintf(buf, "%d\n", !data[TPM_GET_CAP_PERM_DISABLE_IDX]);
+
+	kfree(data);
+	return rc;
 }
 EXPORT_SYMBOL_GPL(tpm_show_enabled);
 
 ssize_t tpm_show_active(struct device * dev, struct device_attribute * attr,
 			char *buf)
 {
-	u8 data[max_t(int, ARRAY_SIZE(tpm_cap), 35)];
+	u8 *data;
 	ssize_t rc;
 
 	struct tpm_chip *chip = dev_get_drvdata(dev);
 	if (chip == NULL)
 		return -ENODEV;
 
+	data = kzalloc(TPM_INTERNAL_RESULT_SIZE, GFP_KERNEL);
+	if (!data)
+		return -ENOMEM;
+
 	memcpy(data, tpm_cap, sizeof(tpm_cap));
 	data[TPM_CAP_IDX] = TPM_CAP_FLAG;
 	data[TPM_CAP_SUBCAP_IDX] = TPM_CAP_FLAG_PERM;
 
-	rc = transmit_cmd(chip, data, sizeof(data),
-			"attemtping to determine the permanent state");
-	if (rc)
+	rc = transmit_cmd(chip, data, TPM_INTERNAL_RESULT_SIZE,
+			"attemtping to determine the permanent active state");
+	if (rc) {
+		kfree(data);
 		return 0;
-	return sprintf(buf, "%d\n", !data[TPM_GET_CAP_PERM_INACTIVE_IDX]);
+	}
+
+	rc = sprintf(buf, "%d\n", !data[TPM_GET_CAP_PERM_INACTIVE_IDX]);
+
+	kfree(data);
+	return rc;
 }
 EXPORT_SYMBOL_GPL(tpm_show_active);
 
 ssize_t tpm_show_owned(struct device * dev, struct device_attribute * attr,
 			char *buf)
 {
-	u8 data[sizeof(tpm_cap)];
+	u8 *data;
 	ssize_t rc;
 
 	struct tpm_chip *chip = dev_get_drvdata(dev);
 	if (chip == NULL)
 		return -ENODEV;
 
+	data = kzalloc(TPM_INTERNAL_RESULT_SIZE, GFP_KERNEL);
+	if (!data)
+		return -ENOMEM;
+
 	memcpy(data, tpm_cap, sizeof(tpm_cap));
 	data[TPM_CAP_IDX] = TPM_CAP_PROP;
 	data[TPM_CAP_SUBCAP_IDX] = TPM_CAP_PROP_OWNER;
 
-	rc = transmit_cmd(chip, data, sizeof(data),
+	rc = transmit_cmd(chip, data, TPM_INTERNAL_RESULT_SIZE,
 			"attempting to determine the owner state");
-	if (rc)
+	if (rc) {
+		kfree(data);
 		return 0;
-	return sprintf(buf, "%d\n", data[TPM_GET_CAP_RET_BOOL_1_IDX]);
+	}
+
+	rc = sprintf(buf, "%d\n", data[TPM_GET_CAP_RET_BOOL_1_IDX]);
+
+	kfree(data);
+	return rc;
 }
 EXPORT_SYMBOL_GPL(tpm_show_owned);
 
 ssize_t tpm_show_temp_deactivated(struct device * dev,
 				struct device_attribute * attr, char *buf)
 {
-	u8 data[sizeof(tpm_cap)];
+	u8 *data;
 	ssize_t rc;
 
 	struct tpm_chip *chip = dev_get_drvdata(dev);
 	if (chip == NULL)
 		return -ENODEV;
 
+	data = kzalloc(TPM_INTERNAL_RESULT_SIZE, GFP_KERNEL);
+	if (!data)
+		return -ENOMEM;
+
 	memcpy(data, tpm_cap, sizeof(tpm_cap));
 	data[TPM_CAP_IDX] = TPM_CAP_FLAG;
 	data[TPM_CAP_SUBCAP_IDX] = TPM_CAP_FLAG_VOL;
 
-	rc = transmit_cmd(chip, data, sizeof(data),
+	rc = transmit_cmd(chip, data, TPM_INTERNAL_RESULT_SIZE,
 			"attempting to determine the temporary state");
-	if (rc)
+	if (rc) {
+		kfree(data);
 		return 0;
-	return sprintf(buf, "%d\n", data[TPM_GET_CAP_TEMP_INACTIVE_IDX]);
+	}
+
+	rc = sprintf(buf, "%d\n", data[TPM_GET_CAP_TEMP_INACTIVE_IDX]);
+
+	kfree(data);
+	return rc;
 }
 EXPORT_SYMBOL_GPL(tpm_show_temp_deactivated);
 
@@ -678,7 +720,7 @@ static const u8 pcrread[] = {
 ssize_t tpm_show_pcrs(struct device *dev, struct device_attribute *attr,
 		      char *buf)
 {
-	u8 data[max_t(int, max(ARRAY_SIZE(tpm_cap), ARRAY_SIZE(pcrread)), 30)];
+	u8 *data;
 	ssize_t rc;
 	int i, j, num_pcrs;
 	__be32 index;
@@ -688,21 +730,27 @@ ssize_t tpm_show_pcrs(struct device *dev, struct device_attribute *attr,
 	if (chip == NULL)
 		return -ENODEV;
 
+	data = kzalloc(TPM_INTERNAL_RESULT_SIZE, GFP_KERNEL);
+	if (!data)
+		return -ENOMEM;
+
 	memcpy(data, tpm_cap, sizeof(tpm_cap));
 	data[TPM_CAP_IDX] = TPM_CAP_PROP;
 	data[TPM_CAP_SUBCAP_IDX] = TPM_CAP_PROP_PCR;
 
-	rc = transmit_cmd(chip, data, sizeof(data),
+	rc = transmit_cmd(chip, data, TPM_INTERNAL_RESULT_SIZE,
 			"attempting to determine the number of PCRS");
-	if (rc)
+	if (rc) {
+		kfree(data);
 		return 0;
+	}
 
 	num_pcrs = be32_to_cpu(*((__be32 *) (data + 14)));
 	for (i = 0; i < num_pcrs; i++) {
 		memcpy(data, pcrread, sizeof(pcrread));
 		index = cpu_to_be32(i);
 		memcpy(data + 10, &index, 4);
-		rc = transmit_cmd(chip, data, sizeof(data),
+		rc = transmit_cmd(chip, data, TPM_INTERNAL_RESULT_SIZE,
 				"attempting to read a PCR");
 		if (rc)
 			goto out;
@@ -712,6 +760,7 @@ ssize_t tpm_show_pcrs(struct device *dev, struct device_attribute *attr,
 		str += sprintf(str, "\n");
 	}
 out:
+	kfree(data);
 	return str - buf;
 }
 EXPORT_SYMBOL_GPL(tpm_show_pcrs);
@@ -795,7 +844,7 @@ static const u8 cap_version[] = {
 ssize_t tpm_show_caps(struct device *dev, struct device_attribute *attr,
 		      char *buf)
 {
-	u8 data[max_t(int, max(ARRAY_SIZE(tpm_cap), ARRAY_SIZE(cap_version)), 30)];
+	u8 *data;
 	ssize_t rc;
 	char *str = buf;
 
@@ -803,21 +852,27 @@ ssize_t tpm_show_caps(struct device *dev, struct device_attribute *attr,
 	if (chip == NULL)
 		return -ENODEV;
 
+	data = kzalloc(TPM_INTERNAL_RESULT_SIZE, GFP_KERNEL);
+	if (!data)
+		return -ENOMEM;
+
 	memcpy(data, tpm_cap, sizeof(tpm_cap));
 	data[TPM_CAP_IDX] = TPM_CAP_PROP;
 	data[TPM_CAP_SUBCAP_IDX] = TPM_CAP_PROP_MANUFACTURER;
 
-	rc = transmit_cmd(chip, data, sizeof(data),
+	rc = transmit_cmd(chip, data, TPM_INTERNAL_RESULT_SIZE,
 			"attempting to determine the manufacturer");
-	if (rc)
+	if (rc) {
+		kfree(data);
 		return 0;
+	}
 
 	str += sprintf(str, "Manufacturer: 0x%x\n",
 		       be32_to_cpu(*((__be32 *) (data + TPM_GET_CAP_RET_UINT32_1_IDX))));
 
 	memcpy(data, cap_version, sizeof(cap_version));
 	data[CAP_VERSION_IDX] = CAP_VERSION_1_1;
-	rc = transmit_cmd(chip, data, sizeof(data),
+	rc = transmit_cmd(chip, data, TPM_INTERNAL_RESULT_SIZE,
 			"attempting to determine the 1.1 version");
 	if (rc)
 		goto out;
@@ -828,6 +883,7 @@ ssize_t tpm_show_caps(struct device *dev, struct device_attribute *attr,
 		       (int) data[17]);
 
 out:
+	kfree(data);
 	return str - buf;
 }
 EXPORT_SYMBOL_GPL(tpm_show_caps);
@@ -835,7 +891,7 @@ EXPORT_SYMBOL_GPL(tpm_show_caps);
 ssize_t tpm_show_caps_1_2(struct device * dev,
 			  struct device_attribute * attr, char *buf)
 {
-	u8 data[max_t(int, max(ARRAY_SIZE(tpm_cap), ARRAY_SIZE(cap_version)), 30)];
+	u8 *data;
 	ssize_t len;
 	char *str = buf;
 
@@ -843,15 +899,20 @@ ssize_t tpm_show_caps_1_2(struct device * dev,
 	if (chip == NULL)
 		return -ENODEV;
 
+	data = kzalloc(TPM_INTERNAL_RESULT_SIZE, GFP_KERNEL);
+	if (!data)
+		return -ENOMEM;
+
 	memcpy(data, tpm_cap, sizeof(tpm_cap));
 	data[TPM_CAP_IDX] = TPM_CAP_PROP;
 	data[TPM_CAP_SUBCAP_IDX] = TPM_CAP_PROP_MANUFACTURER;
 
-	if ((len = tpm_transmit(chip, data, sizeof(data))) <=
-	    TPM_ERROR_SIZE) {
+	len = tpm_transmit(chip, data, TPM_INTERNAL_RESULT_SIZE);
+	if (len <= TPM_ERROR_SIZE) {
 		dev_dbg(chip->dev, "A TPM error (%d) occurred "
 			"attempting to determine the manufacturer\n",
 			be32_to_cpu(*((__be32 *) (data + TPM_RET_CODE_IDX))));
+		kfree(data);
 		return 0;
 	}
 
@@ -861,8 +922,8 @@ ssize_t tpm_show_caps_1_2(struct device * dev,
 	memcpy(data, cap_version, sizeof(cap_version));
 	data[CAP_VERSION_IDX] = CAP_VERSION_1_2;
 
-	if ((len = tpm_transmit(chip, data, sizeof(data))) <=
-	    TPM_ERROR_SIZE) {
+	len = tpm_transmit(chip, data, TPM_INTERNAL_RESULT_SIZE);
+	if (len <= TPM_ERROR_SIZE) {
 		dev_err(chip->dev, "A TPM error (%d) occurred "
 			"attempting to determine the 1.2 version\n",
 			be32_to_cpu(*((__be32 *) (data + TPM_RET_CODE_IDX))));
@@ -874,6 +935,7 @@ ssize_t tpm_show_caps_1_2(struct device * dev,
 		       (int) data[19]);
 
 out:
+	kfree(data);
 	return str - buf;
 }
 EXPORT_SYMBOL_GPL(tpm_show_caps_1_2);
@@ -966,7 +1028,7 @@ ssize_t tpm_write(struct file *file, const char __user *buf,
 		  size_t size, loff_t *off)
 {
 	struct tpm_chip *chip = file->private_data;
-	int in_size = size, out_size;
+	size_t in_size = size, out_size;
 
 	/* cannot perform a write until the read has cleared
 	   either via tpm_read or a user_read_timer timeout */
@@ -1001,7 +1063,7 @@ ssize_t tpm_read(struct file *file, char __user *buf,
 		 size_t size, loff_t *off)
 {
 	struct tpm_chip *chip = file->private_data;
-	int ret_size;
+	ssize_t ret_size;
 
 	del_singleshot_timer_sync(&chip->user_read_timer);
 	flush_scheduled_work();
diff --git a/drivers/char/tpm/tpm_bios.c b/drivers/char/tpm/tpm_bios.c
index 60a2d2630e36..68f052b42ed7 100644
--- a/drivers/char/tpm/tpm_bios.c
+++ b/drivers/char/tpm/tpm_bios.c
@@ -448,7 +448,7 @@ out_free:
 	goto out;
 }
 
-const struct file_operations tpm_ascii_bios_measurements_ops = {
+static const struct file_operations tpm_ascii_bios_measurements_ops = {
 	.open = tpm_ascii_bios_measurements_open,
 	.read = seq_read,
 	.llseek = seq_lseek,
@@ -486,7 +486,7 @@ out_free:
 	goto out;
 }
 
-const struct file_operations tpm_binary_bios_measurements_ops = {
+static const struct file_operations tpm_binary_bios_measurements_ops = {
 	.open = tpm_binary_bios_measurements_open,
 	.read = seq_read,
 	.llseek = seq_lseek,
diff --git a/drivers/char/tpm/tpm_tis.c b/drivers/char/tpm/tpm_tis.c
index c7a977bc03e8..ed1879c0dd8d 100644
--- a/drivers/char/tpm/tpm_tis.c
+++ b/drivers/char/tpm/tpm_tis.c
@@ -622,6 +622,7 @@ static struct pnp_device_id tpm_pnp_tbl[] __devinitdata = {
 	{"ATM1200", 0},		/* Atmel */
 	{"IFX0102", 0},		/* Infineon */
 	{"BCM0101", 0},		/* Broadcom */
+	{"BCM0102", 0},		/* Broadcom */
 	{"NSC1200", 0},		/* National */
 	{"ICO0102", 0},		/* Intel */
 	/* Add new here */
diff --git a/drivers/char/tty_io.c b/drivers/char/tty_io.c
index 6f4d856df987..daeb8f766971 100644
--- a/drivers/char/tty_io.c
+++ b/drivers/char/tty_io.c
@@ -1161,8 +1161,8 @@ void disassociate_ctty(int on_exit)
 	tty = get_current_tty();
 	if (tty) {
 		tty_pgrp = get_pid(tty->pgrp);
-		mutex_unlock(&tty_mutex);
 		lock_kernel();
+		mutex_unlock(&tty_mutex);
 		/* XXX: here we race, there is nothing protecting tty */
 		if (on_exit && tty->driver->type != TTY_DRIVER_TYPE_PTY)
 			tty_vhangup(tty);
@@ -2496,45 +2496,26 @@ static int tiocgwinsz(struct tty_struct *tty, struct winsize __user *arg)
 }
 
 /**
- *	tiocswinsz		-	implement window size set ioctl
- *	@tty; tty
- *	@arg: user buffer for result
- *
- *	Copies the user idea of the window size to the kernel. Traditionally
- *	this is just advisory information but for the Linux console it
- *	actually has driver level meaning and triggers a VC resize.
+ *	tty_do_resize		-	resize event
+ *	@tty: tty being resized
+ *	@real_tty: real tty (not the same as tty if using a pty/tty pair)
+ *	@rows: rows (character)
+ *	@cols: cols (character)
  *
- *	Locking:
- *		Called function use the console_sem is used to ensure we do
- *	not try and resize the console twice at once.
- *		The tty->termios_mutex is used to ensure we don't double
- *	resize and get confused. Lock order - tty->termios_mutex before
- *	console sem
+ *	Update the termios variables and send the neccessary signals to
+ *	peform a terminal resize correctly
  */
 
-static int tiocswinsz(struct tty_struct *tty, struct tty_struct *real_tty,
-	struct winsize __user *arg)
+int tty_do_resize(struct tty_struct *tty, struct tty_struct *real_tty,
+					struct winsize *ws)
 {
-	struct winsize tmp_ws;
 	struct pid *pgrp, *rpgrp;
 	unsigned long flags;
 
-	if (copy_from_user(&tmp_ws, arg, sizeof(*arg)))
-		return -EFAULT;
-
-	mutex_lock(&tty->termios_mutex);
-	if (!memcmp(&tmp_ws, &tty->winsize, sizeof(*arg)))
+	/* For a PTY we need to lock the tty side */
+	mutex_lock(&real_tty->termios_mutex);
+	if (!memcmp(ws, &tty->winsize, sizeof(*ws)))
 		goto done;
-
-#ifdef CONFIG_VT
-	if (tty->driver->type == TTY_DRIVER_TYPE_CONSOLE) {
-		if (vc_lock_resize(tty->driver_data, tmp_ws.ws_col,
-					tmp_ws.ws_row)) {
-			mutex_unlock(&tty->termios_mutex);
-			return -ENXIO;
-		}
-	}
-#endif
 	/* Get the PID values and reference them so we can
 	   avoid holding the tty ctrl lock while sending signals */
 	spin_lock_irqsave(&tty->ctrl_lock, flags);
@@ -2550,14 +2531,42 @@ static int tiocswinsz(struct tty_struct *tty, struct tty_struct *real_tty,
 	put_pid(pgrp);
 	put_pid(rpgrp);
 
-	tty->winsize = tmp_ws;
-	real_tty->winsize = tmp_ws;
+	tty->winsize = *ws;
+	real_tty->winsize = *ws;
 done:
-	mutex_unlock(&tty->termios_mutex);
+	mutex_unlock(&real_tty->termios_mutex);
 	return 0;
 }
 
 /**
+ *	tiocswinsz		-	implement window size set ioctl
+ *	@tty; tty
+ *	@arg: user buffer for result
+ *
+ *	Copies the user idea of the window size to the kernel. Traditionally
+ *	this is just advisory information but for the Linux console it
+ *	actually has driver level meaning and triggers a VC resize.
+ *
+ *	Locking:
+ *		Driver dependant. The default do_resize method takes the
+ *	tty termios mutex and ctrl_lock. The console takes its own lock
+ *	then calls into the default method.
+ */
+
+static int tiocswinsz(struct tty_struct *tty, struct tty_struct *real_tty,
+	struct winsize __user *arg)
+{
+	struct winsize tmp_ws;
+	if (copy_from_user(&tmp_ws, arg, sizeof(*arg)))
+		return -EFAULT;
+
+	if (tty->ops->resize)
+		return tty->ops->resize(tty, real_tty, &tmp_ws);
+	else
+		return tty_do_resize(tty, real_tty, &tmp_ws);
+}
+
+/**
  *	tioccons	-	allow admin to move logical console
  *	@file: the file to become console
  *
@@ -3580,7 +3589,6 @@ void proc_clear_tty(struct task_struct *p)
 	p->signal->tty = NULL;
 	spin_unlock_irq(&p->sighand->siglock);
 }
-EXPORT_SYMBOL(proc_clear_tty);
 
 /* Called under the sighand lock */
 
diff --git a/drivers/char/tty_ioctl.c b/drivers/char/tty_ioctl.c
index ea9fc5d03b99..bf34e4597421 100644
--- a/drivers/char/tty_ioctl.c
+++ b/drivers/char/tty_ioctl.c
@@ -937,12 +937,14 @@ int tty_mode_ioctl(struct tty_struct *tty, struct file *file,
 			return 0;
 #endif
 	case TIOCGSOFTCAR:
-		return put_user(C_CLOCAL(tty) ? 1 : 0,
+		/* FIXME: for correctness we may need to take the termios
+		   lock here - review */
+		return put_user(C_CLOCAL(real_tty) ? 1 : 0,
 						(int __user *)arg);
 	case TIOCSSOFTCAR:
 		if (get_user(arg, (unsigned int __user *) arg))
 			return -EFAULT;
-		return tty_change_softcar(tty, arg);
+		return tty_change_softcar(real_tty, arg);
 	default:
 		return -ENOIOCTLCMD;
 	}
diff --git a/drivers/char/tty_ldisc.c b/drivers/char/tty_ldisc.c
index 241cbdea65ab..f307f135cbfb 100644
--- a/drivers/char/tty_ldisc.c
+++ b/drivers/char/tty_ldisc.c
@@ -169,7 +169,7 @@ static int tty_ldisc_get(int disc, struct tty_ldisc *ld)
 	if (disc < N_TTY || disc >= NR_LDISCS)
 		return -EINVAL;
 	err = tty_ldisc_try_get(disc, ld);
-	if (err == -EAGAIN) {
+	if (err < 0) {
 		request_module("tty-ldisc-%d", disc);
 		err = tty_ldisc_try_get(disc, ld);
 	}
diff --git a/drivers/char/viocons.c b/drivers/char/viocons.c
deleted file mode 100644
index 65fb848e1cce..000000000000
--- a/drivers/char/viocons.c
+++ /dev/null
@@ -1,1171 +0,0 @@
-/* -*- linux-c -*-
- *
- *  drivers/char/viocons.c
- *
- *  iSeries Virtual Terminal
- *
- *  Authors: Dave Boutcher <boutcher@us.ibm.com>
- *           Ryan Arnold <ryanarn@us.ibm.com>
- *           Colin Devilbiss <devilbis@us.ibm.com>
- *           Stephen Rothwell
- *
- * (C) Copyright 2000, 2001, 2002, 2003, 2004 IBM Corporation
- *
- * This program is free software;  you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of the
- * License, or (at your option) anyu later version.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software Foundation,
- * Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-#include <linux/kernel.h>
-#include <linux/proc_fs.h>
-#include <linux/errno.h>
-#include <linux/vmalloc.h>
-#include <linux/mm.h>
-#include <linux/console.h>
-#include <linux/module.h>
-#include <asm/uaccess.h>
-#include <linux/init.h>
-#include <linux/wait.h>
-#include <linux/spinlock.h>
-#include <asm/ioctls.h>
-#include <linux/kd.h>
-#include <linux/tty.h>
-#include <linux/tty_flip.h>
-#include <linux/sysrq.h>
-
-#include <asm/firmware.h>
-#include <asm/iseries/vio.h>
-#include <asm/iseries/hv_lp_event.h>
-#include <asm/iseries/hv_call_event.h>
-#include <asm/iseries/hv_lp_config.h>
-#include <asm/iseries/hv_call.h>
-
-#ifdef CONFIG_VT
-#error You must turn off CONFIG_VT to use CONFIG_VIOCONS
-#endif
-
-#define VIOTTY_MAGIC (0x0DCB)
-#define VTTY_PORTS 10
-
-#define VIOCONS_KERN_WARN	KERN_WARNING "viocons: "
-#define VIOCONS_KERN_INFO	KERN_INFO "viocons: "
-
-static DEFINE_SPINLOCK(consolelock);
-static DEFINE_SPINLOCK(consoleloglock);
-
-static int vio_sysrq_pressed;
-
-#define VIOCHAR_NUM_BUF		16
-
-/*
- * Our port information.  We store a pointer to one entry in the
- * tty_driver_data
- */
-static struct port_info {
-	int magic;
-	struct tty_struct *tty;
-	HvLpIndex lp;
-	u8 vcons;
-	u64 seq;	/* sequence number of last HV send */
-	u64 ack;	/* last ack from HV */
-/*
- * When we get writes faster than we can send it to the partition,
- * buffer the data here. Note that used is a bit map of used buffers.
- * It had better have enough bits to hold VIOCHAR_NUM_BUF the bitops assume
- * it is a multiple of unsigned long
- */
-	unsigned long used;
-	u8 *buffer[VIOCHAR_NUM_BUF];
-	int bufferBytes[VIOCHAR_NUM_BUF];
-	int curbuf;
-	int bufferOverflow;
-	int overflowMessage;
-} port_info[VTTY_PORTS];
-
-#define viochar_is_console(pi)	((pi) == &port_info[0])
-#define viochar_port(pi)	((pi) - &port_info[0])
-
-static void initDataEvent(struct viocharlpevent *viochar, HvLpIndex lp);
-
-static struct tty_driver *viotty_driver;
-
-static void hvlog(char *fmt, ...)
-{
-	int i;
-	unsigned long flags;
-	va_list args;
-	static char buf[256];
-
-	spin_lock_irqsave(&consoleloglock, flags);
-	va_start(args, fmt);
-	i = vscnprintf(buf, sizeof(buf) - 1, fmt, args);
-	va_end(args);
-	buf[i++] = '\r';
-	HvCall_writeLogBuffer(buf, i);
-	spin_unlock_irqrestore(&consoleloglock, flags);
-}
-
-static void hvlogOutput(const char *buf, int count)
-{
-	unsigned long flags;
-	int begin;
-	int index;
-	static const char cr = '\r';
-
-	begin = 0;
-	spin_lock_irqsave(&consoleloglock, flags);
-	for (index = 0; index < count; index++) {
-		if (buf[index] == '\n') {
-			/*
-			 * Start right after the last '\n' or at the zeroth
-			 * array position and output the number of characters
-			 * including the newline.
-			 */
-			HvCall_writeLogBuffer(&buf[begin], index - begin + 1);
-			begin = index + 1;
-			HvCall_writeLogBuffer(&cr, 1);
-		}
-	}
-	if ((index - begin) > 0)
-		HvCall_writeLogBuffer(&buf[begin], index - begin);
-	spin_unlock_irqrestore(&consoleloglock, flags);
-}
-
-/*
- * Make sure we're pointing to a valid port_info structure.  Shamelessly
- * plagerized from serial.c
- */
-static inline int viotty_paranoia_check(struct port_info *pi,
-					char *name, const char *routine)
-{
-	static const char *bad_pi_addr = VIOCONS_KERN_WARN
-		"warning: bad address for port_info struct (%s) in %s\n";
-	static const char *badmagic = VIOCONS_KERN_WARN
-		"warning: bad magic number for port_info struct (%s) in %s\n";
-
-	if ((pi < &port_info[0]) || (viochar_port(pi) > VTTY_PORTS)) {
-		printk(bad_pi_addr, name, routine);
-		return 1;
-	}
-	if (pi->magic != VIOTTY_MAGIC) {
-		printk(badmagic, name, routine);
-		return 1;
-	}
-	return 0;
-}
-
-/*
- * Add data to our pending-send buffers.  
- *
- * NOTE: Don't use printk in here because it gets nastily recursive.
- * hvlog can be used to log to the hypervisor buffer
- */
-static int buffer_add(struct port_info *pi, const char *buf, size_t len)
-{
-	size_t bleft;
-	size_t curlen;
-	const char *curbuf;
-	int nextbuf;
-
-	curbuf = buf;
-	bleft = len;
-	while (bleft > 0) {
-		/*
-		 * If there is no space left in the current buffer, we have
-		 * filled everything up, so return.  If we filled the previous
-		 * buffer we would already have moved to the next one.
-		 */
-		if (pi->bufferBytes[pi->curbuf] == VIOCHAR_MAX_DATA) {
-			hvlog ("\n\rviocons: No overflow buffer available for memcpy().\n");
-			pi->bufferOverflow++;
-			pi->overflowMessage = 1;
-			break;
-		}
-
-		/*
-		 * Turn on the "used" bit for this buffer.  If it's already on,
-		 * that's fine.
-		 */
-		set_bit(pi->curbuf, &pi->used);
-
-		/*
-		 * See if this buffer has been allocated.  If not, allocate it.
-		 */
-		if (pi->buffer[pi->curbuf] == NULL) {
-			pi->buffer[pi->curbuf] =
-			    kmalloc(VIOCHAR_MAX_DATA, GFP_ATOMIC);
-			if (pi->buffer[pi->curbuf] == NULL) {
-				hvlog("\n\rviocons: kmalloc failed allocating spaces for buffer %d.",
-					pi->curbuf);
-				break;
-			}
-		}
-
-		/* Figure out how much we can copy into this buffer. */
-		if (bleft < (VIOCHAR_MAX_DATA - pi->bufferBytes[pi->curbuf]))
-			curlen = bleft;
-		else
-			curlen = VIOCHAR_MAX_DATA - pi->bufferBytes[pi->curbuf];
-
-		/* Copy the data into the buffer. */
-		memcpy(pi->buffer[pi->curbuf] + pi->bufferBytes[pi->curbuf],
-				curbuf, curlen);
-
-		pi->bufferBytes[pi->curbuf] += curlen;
-		curbuf += curlen;
-		bleft -= curlen;
-
-		/*
-		 * Now see if we've filled this buffer.  If not then
-		 * we'll try to use it again later.  If we've filled it
-		 * up then we'll advance the curbuf to the next in the
-		 * circular queue.
-		 */
-		if (pi->bufferBytes[pi->curbuf] == VIOCHAR_MAX_DATA) {
-			nextbuf = (pi->curbuf + 1) % VIOCHAR_NUM_BUF;
-			/*
-			 * Move to the next buffer if it hasn't been used yet
-			 */
-			if (test_bit(nextbuf, &pi->used) == 0)
-				pi->curbuf = nextbuf;
-		}
-	}
-	return len - bleft;
-}
-
-/*
- * Send pending data
- *
- * NOTE: Don't use printk in here because it gets nastily recursive.
- * hvlog can be used to log to the hypervisor buffer
- */
-static void send_buffers(struct port_info *pi)
-{
-	HvLpEvent_Rc hvrc;
-	int nextbuf;
-	struct viocharlpevent *viochar;
-	unsigned long flags;
-
-	spin_lock_irqsave(&consolelock, flags);
-
-	viochar = (struct viocharlpevent *)
-	    vio_get_event_buffer(viomajorsubtype_chario);
-
-	/* Make sure we got a buffer */
-	if (viochar == NULL) {
-		hvlog("\n\rviocons: Can't get viochar buffer in sendBuffers().");
-		spin_unlock_irqrestore(&consolelock, flags);
-		return;
-	}
-
-	if (pi->used == 0) {
-		hvlog("\n\rviocons: in sendbuffers(), but no buffers used.\n");
-		vio_free_event_buffer(viomajorsubtype_chario, viochar);
-		spin_unlock_irqrestore(&consolelock, flags);
-		return;
-	}
-
-	/*
-	 * curbuf points to the buffer we're filling.  We want to
-	 * start sending AFTER this one.  
-	 */
-	nextbuf = (pi->curbuf + 1) % VIOCHAR_NUM_BUF;
-
-	/*
-	 * Loop until we find a buffer with the used bit on
-	 */
-	while (test_bit(nextbuf, &pi->used) == 0)
-		nextbuf = (nextbuf + 1) % VIOCHAR_NUM_BUF;
-
-	initDataEvent(viochar, pi->lp);
-
-	/*
-	 * While we have buffers with data, and our send window
-	 * is open, send them
-	 */
-	while ((test_bit(nextbuf, &pi->used)) &&
-	       ((pi->seq - pi->ack) < VIOCHAR_WINDOW)) {
-		viochar->len = pi->bufferBytes[nextbuf];
-		viochar->event.xCorrelationToken = pi->seq++;
-		viochar->event.xSizeMinus1 =
-			offsetof(struct viocharlpevent, data) + viochar->len;
-
-		memcpy(viochar->data, pi->buffer[nextbuf], viochar->len);
-
-		hvrc = HvCallEvent_signalLpEvent(&viochar->event);
-		if (hvrc) {
-			/*
-			 * MUST unlock the spinlock before doing a printk
-			 */
-			vio_free_event_buffer(viomajorsubtype_chario, viochar);
-			spin_unlock_irqrestore(&consolelock, flags);
-
-			printk(VIOCONS_KERN_WARN
-			       "error sending event! return code %d\n",
-			       (int)hvrc);
-			return;
-		}
-
-		/*
-		 * clear the used bit, zero the number of bytes in
-		 * this buffer, and move to the next buffer
-		 */
-		clear_bit(nextbuf, &pi->used);
-		pi->bufferBytes[nextbuf] = 0;
-		nextbuf = (nextbuf + 1) % VIOCHAR_NUM_BUF;
-	}
-
-	/*
-	 * If we have emptied all the buffers, start at 0 again.
-	 * this will re-use any allocated buffers
-	 */
-	if (pi->used == 0) {
-		pi->curbuf = 0;
-
-		if (pi->overflowMessage)
-			pi->overflowMessage = 0;
-
-		if (pi->tty) {
-			tty_wakeup(pi->tty);
-		}
-	}
-
-	vio_free_event_buffer(viomajorsubtype_chario, viochar);
-	spin_unlock_irqrestore(&consolelock, flags);
-}
-
-/*
- * Our internal writer.  Gets called both from the console device and
- * the tty device.  the tty pointer will be NULL if called from the console.
- * Return total number of bytes "written".
- *
- * NOTE: Don't use printk in here because it gets nastily recursive.  hvlog
- * can be used to log to the hypervisor buffer
- */
-static int internal_write(struct port_info *pi, const char *buf, size_t len)
-{
-	HvLpEvent_Rc hvrc;
-	size_t bleft;
-	size_t curlen;
-	const char *curbuf;
-	unsigned long flags;
-	struct viocharlpevent *viochar;
-
-	/*
-	 * Write to the hvlog of inbound data are now done prior to
-	 * calling internal_write() since internal_write() is only called in
-	 * the event that an lp event path is active, which isn't the case for
-	 * logging attempts prior to console initialization.
-	 *
-	 * If there is already data queued for this port, send it prior to
-	 * attempting to send any new data.
-	 */
-	if (pi->used)
-		send_buffers(pi);
-
-	spin_lock_irqsave(&consolelock, flags);
-
-	viochar = vio_get_event_buffer(viomajorsubtype_chario);
-	if (viochar == NULL) {
-		spin_unlock_irqrestore(&consolelock, flags);
-		hvlog("\n\rviocons: Can't get vio buffer in internal_write().");
-		return -EAGAIN;
-	}
-	initDataEvent(viochar, pi->lp);
-
-	curbuf = buf;
-	bleft = len;
-
-	while ((bleft > 0) && (pi->used == 0) &&
-	       ((pi->seq - pi->ack) < VIOCHAR_WINDOW)) {
-		if (bleft > VIOCHAR_MAX_DATA)
-			curlen = VIOCHAR_MAX_DATA;
-		else
-			curlen = bleft;
-
-		viochar->event.xCorrelationToken = pi->seq++;
-		memcpy(viochar->data, curbuf, curlen);
-		viochar->len = curlen;
-		viochar->event.xSizeMinus1 =
-		    offsetof(struct viocharlpevent, data) + curlen;
-
-		hvrc = HvCallEvent_signalLpEvent(&viochar->event);
-		if (hvrc) {
-			hvlog("viocons: error sending event! %d\n", (int)hvrc);
-			goto out;
-		}
-		curbuf += curlen;
-		bleft -= curlen;
-	}
-
-	/* If we didn't send it all, buffer as much of it as we can. */
-	if (bleft > 0)
-		bleft -= buffer_add(pi, curbuf, bleft);
-out:
-	vio_free_event_buffer(viomajorsubtype_chario, viochar);
-	spin_unlock_irqrestore(&consolelock, flags);
-	return len - bleft;
-}
-
-static struct port_info *get_port_data(struct tty_struct *tty)
-{
-	unsigned long flags;
-	struct port_info *pi;
-
-	spin_lock_irqsave(&consolelock, flags);
-	if (tty) {
-		pi = (struct port_info *)tty->driver_data;
-		if (!pi || viotty_paranoia_check(pi, tty->name,
-					     "get_port_data")) {
-			pi = NULL;
-		}
-	} else
-		/*
-		 * If this is the console device, use the lp from
-		 * the first port entry
-		 */
-		pi = &port_info[0];
-	spin_unlock_irqrestore(&consolelock, flags);
-	return pi;
-}
-
-/*
- * Initialize the common fields in a charLpEvent
- */
-static void initDataEvent(struct viocharlpevent *viochar, HvLpIndex lp)
-{
-	struct HvLpEvent *hev = &viochar->event;
-
-	memset(viochar, 0, sizeof(struct viocharlpevent));
-
-	hev->flags = HV_LP_EVENT_VALID | HV_LP_EVENT_DEFERRED_ACK |
-		HV_LP_EVENT_INT;
-	hev->xType = HvLpEvent_Type_VirtualIo;
-	hev->xSubtype = viomajorsubtype_chario | viochardata;
-	hev->xSourceLp = HvLpConfig_getLpIndex();
-	hev->xTargetLp = lp;
-	hev->xSizeMinus1 = sizeof(struct viocharlpevent);
-	hev->xSourceInstanceId = viopath_sourceinst(lp);
-	hev->xTargetInstanceId = viopath_targetinst(lp);
-}
-
-/*
- * early console device write
- */
-static void viocons_write_early(struct console *co, const char *s, unsigned count)
-{
-	hvlogOutput(s, count);
-}
-
-/*
- * console device write
- */
-static void viocons_write(struct console *co, const char *s, unsigned count)
-{
-	int index;
-	int begin;
-	struct port_info *pi;
-
-	static const char cr = '\r';
-
-	/*
-	 * Check port data first because the target LP might be valid but
-	 * simply not active, in which case we want to hvlog the output.
-	 */
-	pi = get_port_data(NULL);
-	if (pi == NULL) {
-		hvlog("\n\rviocons_write: unable to get port data.");
-		return;
-	}
-
-	hvlogOutput(s, count);
-
-	if (!viopath_isactive(pi->lp))
-		return;
-
-	/* 
-	 * Any newline character found will cause a
-	 * carriage return character to be emitted as well. 
-	 */
-	begin = 0;
-	for (index = 0; index < count; index++) {
-		if (s[index] == '\n') {
-			/* 
-			 * Newline found. Print everything up to and 
-			 * including the newline
-			 */
-			internal_write(pi, &s[begin], index - begin + 1);
-			begin = index + 1;
-			/* Emit a carriage return as well */
-			internal_write(pi, &cr, 1);
-		}
-	}
-
-	/* If any characters left to write, write them now */
-	if ((index - begin) > 0)
-		internal_write(pi, &s[begin], index - begin);
-}
-
-/*
- * Work out the device associate with this console
- */
-static struct tty_driver *viocons_device(struct console *c, int *index)
-{
-	*index = c->index;
-	return viotty_driver;
-}
-
-/*
- * console device I/O methods
- */
-static struct console viocons_early = {
-	.name = "viocons",
-	.write = viocons_write_early,
-	.flags = CON_PRINTBUFFER,
-	.index = -1,
-};
-
-static struct console viocons = {
-	.name = "viocons",
-	.write = viocons_write,
-	.device = viocons_device,
-	.flags = CON_PRINTBUFFER,
-	.index = -1,
-};
-
-/*
- * TTY Open method
- */
-static int viotty_open(struct tty_struct *tty, struct file *filp)
-{
-	int port;
-	unsigned long flags;
-	struct port_info *pi;
-
-	port = tty->index;
-
-	if ((port < 0) || (port >= VTTY_PORTS))
-		return -ENODEV;
-
-	spin_lock_irqsave(&consolelock, flags);
-
-	pi = &port_info[port];
-	/* If some other TTY is already connected here, reject the open */
-	if ((pi->tty) && (pi->tty != tty)) {
-		spin_unlock_irqrestore(&consolelock, flags);
-		printk(VIOCONS_KERN_WARN
-		       "attempt to open device twice from different ttys\n");
-		return -EBUSY;
-	}
-	tty->driver_data = pi;
-	pi->tty = tty;
-	spin_unlock_irqrestore(&consolelock, flags);
-
-	return 0;
-}
-
-/*
- * TTY Close method
- */
-static void viotty_close(struct tty_struct *tty, struct file *filp)
-{
-	unsigned long flags;
-	struct port_info *pi;
-
-	spin_lock_irqsave(&consolelock, flags);
-	pi = (struct port_info *)tty->driver_data;
-
-	if (!pi || viotty_paranoia_check(pi, tty->name, "viotty_close")) {
-		spin_unlock_irqrestore(&consolelock, flags);
-		return;
-	}
-	if (tty->count == 1)
-		pi->tty = NULL;
-	spin_unlock_irqrestore(&consolelock, flags);
-}
-
-/*
- * TTY Write method
- */
-static int viotty_write(struct tty_struct *tty, const unsigned char *buf,
-		int count)
-{
-	struct port_info *pi;
-
-	pi = get_port_data(tty);
-	if (pi == NULL) {
-		hvlog("\n\rviotty_write: no port data.");
-		return -ENODEV;
-	}
-
-	if (viochar_is_console(pi))
-		hvlogOutput(buf, count);
-
-	/*
-	 * If the path to this LP is closed, don't bother doing anything more.
-	 * just dump the data on the floor and return count.  For some reason
-	 * some user level programs will attempt to probe available tty's and
-	 * they'll attempt a viotty_write on an invalid port which maps to an
-	 * invalid target lp.  If this is the case then ignore the
-	 * viotty_write call and, since the viopath isn't active to this
-	 * partition, return count.
-	 */
-	if (!viopath_isactive(pi->lp))
-		return count;
-
-	return internal_write(pi, buf, count);
-}
-
-/*
- * TTY put_char method
- */
-static int viotty_put_char(struct tty_struct *tty, unsigned char ch)
-{
-	struct port_info *pi;
-
-	pi = get_port_data(tty);
-	if (pi == NULL)
-		return 0;
-
-	/* This will append '\r' as well if the char is '\n' */
-	if (viochar_is_console(pi))
-		hvlogOutput(&ch, 1);
-
-	if (viopath_isactive(pi->lp))
-		internal_write(pi, &ch, 1);
-	return 1;
-}
-
-/*
- * TTY write_room method
- */
-static int viotty_write_room(struct tty_struct *tty)
-{
-	int i;
-	int room = 0;
-	struct port_info *pi;
-	unsigned long flags;
-
-	spin_lock_irqsave(&consolelock, flags);
-	pi = (struct port_info *)tty->driver_data;
-	if (!pi || viotty_paranoia_check(pi, tty->name, "viotty_write_room")) {
-		spin_unlock_irqrestore(&consolelock, flags);
-		return 0;
-	}
-
-	/* If no buffers are used, return the max size. */
-	if (pi->used == 0) {
-		spin_unlock_irqrestore(&consolelock, flags);
-		return VIOCHAR_MAX_DATA * VIOCHAR_NUM_BUF;
-	}
-
-	/*
-	 * We retain the spinlock because we want to get an accurate
-	 * count and it can change on us between each operation if we
-	 * don't hold the spinlock.
-	 */
-	for (i = 0; ((i < VIOCHAR_NUM_BUF) && (room < VIOCHAR_MAX_DATA)); i++)
-		room += (VIOCHAR_MAX_DATA - pi->bufferBytes[i]);
-	spin_unlock_irqrestore(&consolelock, flags);
-
-	if (room > VIOCHAR_MAX_DATA)
-		room = VIOCHAR_MAX_DATA;
-	return room;
-}
-
-/*
- * TTY chars_in_buffer method
- */
-static int viotty_chars_in_buffer(struct tty_struct *tty)
-{
-	return 0;
-}
-
-static int viotty_ioctl(struct tty_struct *tty, struct file *file,
-			unsigned int cmd, unsigned long arg)
-{
-	switch (cmd) {
-	/*
-	 * the ioctls below read/set the flags usually shown in the leds
-	 * don't use them - they will go away without warning
-	 */
-	case KDGETLED:
-	case KDGKBLED:
-		return put_user(0, (char *)arg);
-
-	case KDSKBLED:
-		return 0;
-	}
-	/* FIXME: WTF is this being called for ??? */
-	lock_kernel();
-	ret =  n_tty_ioctl(tty, file, cmd, arg);
-	unlock_kernel();
-	return ret;
-}
-
-/*
- * Handle an open charLpEvent.  Could be either interrupt or ack
- */
-static void vioHandleOpenEvent(struct HvLpEvent *event)
-{
-	unsigned long flags;
-	struct viocharlpevent *cevent = (struct viocharlpevent *)event;
-	u8 port = cevent->virtual_device;
-	struct port_info *pi;
-	int reject = 0;
-
-	if (hvlpevent_is_ack(event)) {
-		if (port >= VTTY_PORTS)
-			return;
-
-		spin_lock_irqsave(&consolelock, flags);
-		/* Got the lock, don't cause console output */
-
-		pi = &port_info[port];
-		if (event->xRc == HvLpEvent_Rc_Good) {
-			pi->seq = pi->ack = 0;
-			/*
-			 * This line allows connections from the primary
-			 * partition but once one is connected from the
-			 * primary partition nothing short of a reboot
-			 * of linux will allow access from the hosting
-			 * partition again without a required iSeries fix.
-			 */
-			pi->lp = event->xTargetLp;
-		}
-
-		spin_unlock_irqrestore(&consolelock, flags);
-		if (event->xRc != HvLpEvent_Rc_Good)
-			printk(VIOCONS_KERN_WARN
-			       "handle_open_event: event->xRc == (%d).\n",
-			       event->xRc);
-
-		if (event->xCorrelationToken != 0) {
-			atomic_t *aptr= (atomic_t *)event->xCorrelationToken;
-			atomic_set(aptr, 1);
-		} else
-			printk(VIOCONS_KERN_WARN
-			       "weird...got open ack without atomic\n");
-		return;
-	}
-
-	/* This had better require an ack, otherwise complain */
-	if (!hvlpevent_need_ack(event)) {
-		printk(VIOCONS_KERN_WARN "viocharopen without ack bit!\n");
-		return;
-	}
-
-	spin_lock_irqsave(&consolelock, flags);
-	/* Got the lock, don't cause console output */
-
-	/* Make sure this is a good virtual tty */
-	if (port >= VTTY_PORTS) {
-		event->xRc = HvLpEvent_Rc_SubtypeError;
-		cevent->subtype_result_code = viorc_openRejected;
-		/*
-		 * Flag state here since we can't printk while holding
-		 * a spinlock.
-		 */
-		reject = 1;
-	} else {
-		pi = &port_info[port];
-		if ((pi->lp != HvLpIndexInvalid) &&
-				(pi->lp != event->xSourceLp)) {
-			/*
-			 * If this is tty is already connected to a different
-			 * partition, fail.
-			 */
-			event->xRc = HvLpEvent_Rc_SubtypeError;
-			cevent->subtype_result_code = viorc_openRejected;
-			reject = 2;
-		} else {
-			pi->lp = event->xSourceLp;
-			event->xRc = HvLpEvent_Rc_Good;
-			cevent->subtype_result_code = viorc_good;
-			pi->seq = pi->ack = 0;
-			reject = 0;
-		}
-	}
-
-	spin_unlock_irqrestore(&consolelock, flags);
-
-	if (reject == 1)
-		printk(VIOCONS_KERN_WARN "open rejected: bad virtual tty.\n");
-	else if (reject == 2)
-		printk(VIOCONS_KERN_WARN
-			"open rejected: console in exclusive use by another partition.\n");
-
-	/* Return the acknowledgement */
-	HvCallEvent_ackLpEvent(event);
-}
-
-/*
- * Handle a close charLpEvent.  This should ONLY be an Interrupt because the
- * virtual console should never actually issue a close event to the hypervisor
- * because the virtual console never goes away.  A close event coming from the
- * hypervisor simply means that there are no client consoles connected to the
- * virtual console.
- *
- * Regardless of the number of connections masqueraded on the other side of
- * the hypervisor ONLY ONE close event should be called to accompany the ONE
- * open event that is called.  The close event should ONLY be called when NO
- * MORE connections (masqueraded or not) exist on the other side of the
- * hypervisor.
- */
-static void vioHandleCloseEvent(struct HvLpEvent *event)
-{
-	unsigned long flags;
-	struct viocharlpevent *cevent = (struct viocharlpevent *)event;
-	u8 port = cevent->virtual_device;
-
-	if (hvlpevent_is_int(event)) {
-		if (port >= VTTY_PORTS) {
-			printk(VIOCONS_KERN_WARN
-					"close message from invalid virtual device.\n");
-			return;
-		}
-
-		/* For closes, just mark the console partition invalid */
-		spin_lock_irqsave(&consolelock, flags);
-		/* Got the lock, don't cause console output */
-
-		if (port_info[port].lp == event->xSourceLp)
-			port_info[port].lp = HvLpIndexInvalid;
-
-		spin_unlock_irqrestore(&consolelock, flags);
-		printk(VIOCONS_KERN_INFO "close from %d\n", event->xSourceLp);
-	} else
-		printk(VIOCONS_KERN_WARN
-				"got unexpected close acknowlegement\n");
-}
-
-/*
- * Handle a config charLpEvent.  Could be either interrupt or ack
- */
-static void vioHandleConfig(struct HvLpEvent *event)
-{
-	struct viocharlpevent *cevent = (struct viocharlpevent *)event;
-
-	HvCall_writeLogBuffer(cevent->data, cevent->len);
-
-	if (cevent->data[0] == 0x01)
-		printk(VIOCONS_KERN_INFO "window resized to %d: %d: %d: %d\n",
-		       cevent->data[1], cevent->data[2],
-		       cevent->data[3], cevent->data[4]);
-	else
-		printk(VIOCONS_KERN_WARN "unknown config event\n");
-}
-
-/*
- * Handle a data charLpEvent. 
- */
-static void vioHandleData(struct HvLpEvent *event)
-{
-	struct tty_struct *tty;
-	unsigned long flags;
-	struct viocharlpevent *cevent = (struct viocharlpevent *)event;
-	struct port_info *pi;
-	int index;
-	int num_pushed;
-	u8 port = cevent->virtual_device;
-
-	if (port >= VTTY_PORTS) {
-		printk(VIOCONS_KERN_WARN "data on invalid virtual device %d\n",
-				port);
-		return;
-	}
-
-	/*
-	 * Hold the spinlock so that we don't take an interrupt that
-	 * changes tty between the time we fetch the port_info
-	 * pointer and the time we paranoia check.
-	 */
-	spin_lock_irqsave(&consolelock, flags);
-	pi = &port_info[port];
-
-	/*
-	 * Change 05/01/2003 - Ryan Arnold: If a partition other than
-	 * the current exclusive partition tries to send us data
-	 * events then just drop them on the floor because we don't
-	 * want his stinking data.  He isn't authorized to receive
-	 * data because he wasn't the first one to get the console,
-	 * therefore he shouldn't be allowed to send data either.
-	 * This will work without an iSeries fix.
-	 */
-	if (pi->lp != event->xSourceLp) {
-		spin_unlock_irqrestore(&consolelock, flags);
-		return;
-	}
-
-	tty = pi->tty;
-	if (tty == NULL) {
-		spin_unlock_irqrestore(&consolelock, flags);
-		printk(VIOCONS_KERN_WARN "no tty for virtual device %d\n",
-				port);
-		return;
-	}
-
-	if (tty->magic != TTY_MAGIC) {
-		spin_unlock_irqrestore(&consolelock, flags);
-		printk(VIOCONS_KERN_WARN "tty bad magic\n");
-		return;
-	}
-
-	/*
-	 * Just to be paranoid, make sure the tty points back to this port
-	 */
-	pi = (struct port_info *)tty->driver_data;
-	if (!pi || viotty_paranoia_check(pi, tty->name, "vioHandleData")) {
-		spin_unlock_irqrestore(&consolelock, flags);
-		return;
-	}
-	spin_unlock_irqrestore(&consolelock, flags);
-
-	/*
-	 * Change 07/21/2003 - Ryan Arnold: functionality added to
-	 * support sysrq utilizing ^O as the sysrq key.  The sysrq
-	 * functionality will only work if built into the kernel and
-	 * then only if sysrq is enabled through the proc filesystem.
-	 */
-	num_pushed = 0;
-	for (index = 0; index < cevent->len; index++) {
-		/*
-		 * Will be optimized away if !CONFIG_MAGIC_SYSRQ:
-		 */
-		if (sysrq_on()) {
-			/* 0x0f is the ascii character for ^O */
-			if (cevent->data[index] == '\x0f') {
-				vio_sysrq_pressed = 1;
-				/*
-				 * continue because we don't want to add
-				 * the sysrq key into the data string.
-				 */
-				continue;
-			} else if (vio_sysrq_pressed) {
-				handle_sysrq(cevent->data[index], tty);
-				vio_sysrq_pressed = 0;
-				/*
-				 * continue because we don't want to add
-				 * the sysrq sequence into the data string.
-				 */
-				continue;
-			}
-		}
-		/*
-		 * The sysrq sequence isn't included in this check if
-		 * sysrq is enabled and compiled into the kernel because
-		 * the sequence will never get inserted into the buffer.
-		 * Don't attempt to copy more data into the buffer than we
-		 * have room for because it would fail without indication.
-		 */
-		if(tty_insert_flip_char(tty, cevent->data[index], TTY_NORMAL) == 0) {
-			printk(VIOCONS_KERN_WARN "input buffer overflow!\n");
-			break;
-		}
-		num_pushed++;
-	}
-
-	if (num_pushed)
-		tty_flip_buffer_push(tty);
-}
-
-/*
- * Handle an ack charLpEvent. 
- */
-static void vioHandleAck(struct HvLpEvent *event)
-{
-	struct viocharlpevent *cevent = (struct viocharlpevent *)event;
-	unsigned long flags;
-	u8 port = cevent->virtual_device;
-
-	if (port >= VTTY_PORTS) {
-		printk(VIOCONS_KERN_WARN "data on invalid virtual device\n");
-		return;
-	}
-
-	spin_lock_irqsave(&consolelock, flags);
-	port_info[port].ack = event->xCorrelationToken;
-	spin_unlock_irqrestore(&consolelock, flags);
-
-	if (port_info[port].used)
-		send_buffers(&port_info[port]);
-}
-
-/*
- * Handle charLpEvents and route to the appropriate routine
- */
-static void vioHandleCharEvent(struct HvLpEvent *event)
-{
-	int charminor;
-
-	if (event == NULL)
-		return;
-
-	charminor = event->xSubtype & VIOMINOR_SUBTYPE_MASK;
-	switch (charminor) {
-	case viocharopen:
-		vioHandleOpenEvent(event);
-		break;
-	case viocharclose:
-		vioHandleCloseEvent(event);
-		break;
-	case viochardata:
-		vioHandleData(event);
-		break;
-	case viocharack:
-		vioHandleAck(event);
-		break;
-	case viocharconfig:
-		vioHandleConfig(event);
-		break;
-	default:
-		if (hvlpevent_is_int(event) && hvlpevent_need_ack(event)) {
-			event->xRc = HvLpEvent_Rc_InvalidSubtype;
-			HvCallEvent_ackLpEvent(event);
-		}
-	}
-}
-
-/*
- * Send an open event
- */
-static int send_open(HvLpIndex remoteLp, void *sem)
-{
-	return HvCallEvent_signalLpEventFast(remoteLp,
-			HvLpEvent_Type_VirtualIo,
-			viomajorsubtype_chario | viocharopen,
-			HvLpEvent_AckInd_DoAck, HvLpEvent_AckType_ImmediateAck,
-			viopath_sourceinst(remoteLp),
-			viopath_targetinst(remoteLp),
-			(u64)(unsigned long)sem, VIOVERSION << 16,
-			0, 0, 0, 0);
-}
-
-static const struct tty_operations serial_ops = {
-	.open = viotty_open,
-	.close = viotty_close,
-	.write = viotty_write,
-	.put_char = viotty_put_char,
-	.write_room = viotty_write_room,
-	.chars_in_buffer = viotty_chars_in_buffer,
-	.ioctl = viotty_ioctl,
-};
-
-static int __init viocons_init2(void)
-{
-	atomic_t wait_flag;
-	int rc;
-
-	if (!firmware_has_feature(FW_FEATURE_ISERIES))
-		return -ENODEV;
-
-	/* +2 for fudge */
-	rc = viopath_open(HvLpConfig_getPrimaryLpIndex(),
-			viomajorsubtype_chario, VIOCHAR_WINDOW + 2);
-	if (rc)
-		printk(VIOCONS_KERN_WARN "error opening to primary %d\n", rc);
-
-	if (viopath_hostLp == HvLpIndexInvalid)
-		vio_set_hostlp();
-
-	/*
-	 * And if the primary is not the same as the hosting LP, open to the 
-	 * hosting lp
-	 */
-	if ((viopath_hostLp != HvLpIndexInvalid) &&
-	    (viopath_hostLp != HvLpConfig_getPrimaryLpIndex())) {
-		printk(VIOCONS_KERN_INFO "open path to hosting (%d)\n",
-				viopath_hostLp);
-		rc = viopath_open(viopath_hostLp, viomajorsubtype_chario,
-				VIOCHAR_WINDOW + 2);	/* +2 for fudge */
-		if (rc)
-			printk(VIOCONS_KERN_WARN
-				"error opening to partition %d: %d\n",
-				viopath_hostLp, rc);
-	}
-
-	if (vio_setHandler(viomajorsubtype_chario, vioHandleCharEvent) < 0)
-		printk(VIOCONS_KERN_WARN
-				"error seting handler for console events!\n");
-
-	/*
-	 * First, try to open the console to the hosting lp.
-	 * Wait on a semaphore for the response.
-	 */
-	atomic_set(&wait_flag, 0);
-	if ((viopath_isactive(viopath_hostLp)) &&
-	    (send_open(viopath_hostLp, (void *)&wait_flag) == 0)) {
-		printk(VIOCONS_KERN_INFO "hosting partition %d\n",
-			viopath_hostLp);
-		while (atomic_read(&wait_flag) == 0)
-			mb();
-		atomic_set(&wait_flag, 0);
-	}
-
-	/*
-	 * If we don't have an active console, try the primary
-	 */
-	if ((!viopath_isactive(port_info[0].lp)) &&
-	    (viopath_isactive(HvLpConfig_getPrimaryLpIndex())) &&
-	    (send_open(HvLpConfig_getPrimaryLpIndex(), (void *)&wait_flag)
-	     == 0)) {
-		printk(VIOCONS_KERN_INFO "opening console to primary partition\n");
-		while (atomic_read(&wait_flag) == 0)
-			mb();
-	}
-
-	/* Initialize the tty_driver structure */
-	viotty_driver = alloc_tty_driver(VTTY_PORTS);
-	viotty_driver->owner = THIS_MODULE;
-	viotty_driver->driver_name = "vioconsole";
-	viotty_driver->name = "tty";
-	viotty_driver->name_base = 1;
-	viotty_driver->major = TTY_MAJOR;
-	viotty_driver->minor_start = 1;
-	viotty_driver->type = TTY_DRIVER_TYPE_CONSOLE;
-	viotty_driver->subtype = 1;
-	viotty_driver->init_termios = tty_std_termios;
-	viotty_driver->flags = TTY_DRIVER_REAL_RAW | TTY_DRIVER_RESET_TERMIOS;
-	tty_set_operations(viotty_driver, &serial_ops);
-
-	if (tty_register_driver(viotty_driver)) {
-		printk(VIOCONS_KERN_WARN "couldn't register console driver\n");
-		put_tty_driver(viotty_driver);
-		viotty_driver = NULL;
-	}
-
-	unregister_console(&viocons_early);
-	register_console(&viocons);
-
-	return 0;
-}
-
-static int __init viocons_init(void)
-{
-	int i;
-
-	if (!firmware_has_feature(FW_FEATURE_ISERIES))
-		return -ENODEV;
-
-	printk(VIOCONS_KERN_INFO "registering console\n");
-	for (i = 0; i < VTTY_PORTS; i++) {
-		port_info[i].lp = HvLpIndexInvalid;
-		port_info[i].magic = VIOTTY_MAGIC;
-	}
-	HvCall_setLogBufferFormatAndCodepage(HvCall_LogBuffer_ASCII, 437);
-	add_preferred_console("viocons", 0, NULL);
-	register_console(&viocons_early);
-	return 0;
-}
-
-console_initcall(viocons_init);
-module_init(viocons_init2);
diff --git a/drivers/char/virtio_console.c b/drivers/char/virtio_console.c
index dc17fe3a88bc..d0f4eb6fdb7f 100644
--- a/drivers/char/virtio_console.c
+++ b/drivers/char/virtio_console.c
@@ -46,6 +46,9 @@ static char *in, *inbuf;
 /* The operations for our console. */
 static struct hv_ops virtio_cons;
 
+/* The hvc device */
+static struct hvc_struct *hvc;
+
 /*D:310 The put_chars() callback is pretty straightforward.
  *
  * We turn the characters into a scatter-gather list, add it to the output
@@ -134,6 +137,27 @@ int __init virtio_cons_early_init(int (*put_chars)(u32, const char *, int))
 	return hvc_instantiate(0, 0, &virtio_cons);
 }
 
+/*
+ * we support only one console, the hvc struct is a global var
+ * There is no need to do anything
+ */
+static int notifier_add_vio(struct hvc_struct *hp, int data)
+{
+	hp->irq_requested = 1;
+	return 0;
+}
+
+static void notifier_del_vio(struct hvc_struct *hp, int data)
+{
+	hp->irq_requested = 0;
+}
+
+static void hvc_handle_input(struct virtqueue *vq)
+{
+	if (hvc_poll(hvc))
+		hvc_kick();
+}
+
 /*D:370 Once we're further in boot, we get probed like any other virtio device.
  * At this stage we set up the output virtqueue.
  *
@@ -144,7 +168,6 @@ int __init virtio_cons_early_init(int (*put_chars)(u32, const char *, int))
 static int __devinit virtcons_probe(struct virtio_device *dev)
 {
 	int err;
-	struct hvc_struct *hvc;
 
 	vdev = dev;
 
@@ -158,7 +181,7 @@ static int __devinit virtcons_probe(struct virtio_device *dev)
 	/* Find the input queue. */
 	/* FIXME: This is why we want to wean off hvc: we do nothing
 	 * when input comes in. */
-	in_vq = vdev->config->find_vq(vdev, 0, NULL);
+	in_vq = vdev->config->find_vq(vdev, 0, hvc_handle_input);
 	if (IS_ERR(in_vq)) {
 		err = PTR_ERR(in_vq);
 		goto free;
@@ -173,15 +196,18 @@ static int __devinit virtcons_probe(struct virtio_device *dev)
 	/* Start using the new console output. */
 	virtio_cons.get_chars = get_chars;
 	virtio_cons.put_chars = put_chars;
+	virtio_cons.notifier_add = notifier_add_vio;
+	virtio_cons.notifier_del = notifier_del_vio;
 
 	/* The first argument of hvc_alloc() is the virtual console number, so
-	 * we use zero.  The second argument is the interrupt number; we
-	 * currently leave this as zero: it would be better not to use the
-	 * hvc mechanism and fix this (FIXME!).
+	 * we use zero.  The second argument is the parameter for the
+	 * notification mechanism (like irq number). We currently leave this
+	 * as zero, virtqueues have implicit notifications.
 	 *
 	 * The third argument is a "struct hv_ops" containing the put_chars()
-	 * and get_chars() pointers.  The final argument is the output buffer
-	 * size: we can do any size, so we put PAGE_SIZE here. */
+	 * get_chars(), notifier_add() and notifier_del() pointers.
+	 * The final argument is the output buffer size: we can do any size,
+	 * so we put PAGE_SIZE here. */
 	hvc = hvc_alloc(0, 0, &virtio_cons, PAGE_SIZE);
 	if (IS_ERR(hvc)) {
 		err = PTR_ERR(hvc);
diff --git a/drivers/char/vme_scc.c b/drivers/char/vme_scc.c
index 69c5afe97f19..1718b3c481db 100644
--- a/drivers/char/vme_scc.c
+++ b/drivers/char/vme_scc.c
@@ -183,8 +183,8 @@ static void scc_init_portstructs(void)
 #ifdef NEW_WRITE_LOCKING
 		port->gs.port_write_mutex = MUTEX;
 #endif
-		init_waitqueue_head(&port->gs.open_wait);
-		init_waitqueue_head(&port->gs.close_wait);
+		init_waitqueue_head(&port->gs.port.open_wait);
+		init_waitqueue_head(&port->gs.port.close_wait);
 	}
 }
 
@@ -422,7 +422,7 @@ static irqreturn_t scc_rx_int(int irq, void *data)
 {
 	unsigned char	ch;
 	struct scc_port *port = data;
-	struct tty_struct *tty = port->gs.tty;
+	struct tty_struct *tty = port->gs.port.tty;
 	SCC_ACCESS_INIT(port);
 
 	ch = SCCread_NB(RX_DATA_REG);
@@ -453,7 +453,7 @@ static irqreturn_t scc_rx_int(int irq, void *data)
 static irqreturn_t scc_spcond_int(int irq, void *data)
 {
 	struct scc_port *port = data;
-	struct tty_struct *tty = port->gs.tty;
+	struct tty_struct *tty = port->gs.port.tty;
 	unsigned char	stat, ch, err;
 	int		int_pending_mask = port->channel == CHANNEL_A ?
 			                   IPR_A_RX : IPR_B_RX;
@@ -500,7 +500,7 @@ static irqreturn_t scc_tx_int(int irq, void *data)
 	struct scc_port *port = data;
 	SCC_ACCESS_INIT(port);
 
-	if (!port->gs.tty) {
+	if (!port->gs.port.tty) {
 		printk(KERN_WARNING "scc_tx_int with NULL tty!\n");
 		SCCmod (INT_AND_DMA_REG, ~IDR_TX_INT_ENAB, 0);
 		SCCwrite(COMMAND_REG, CR_TX_PENDING_RESET);
@@ -512,8 +512,9 @@ static irqreturn_t scc_tx_int(int irq, void *data)
 			SCCwrite(TX_DATA_REG, port->x_char);
 			port->x_char = 0;
 		}
-		else if ((port->gs.xmit_cnt <= 0) || port->gs.tty->stopped ||
-				port->gs.tty->hw_stopped)
+		else if ((port->gs.xmit_cnt <= 0) ||
+			 port->gs.port.tty->stopped ||
+			 port->gs.port.tty->hw_stopped)
 			break;
 		else {
 			SCCwrite(TX_DATA_REG, port->gs.xmit_buf[port->gs.xmit_tail++]);
@@ -522,15 +523,15 @@ static irqreturn_t scc_tx_int(int irq, void *data)
 				break;
 		}
 	}
-	if ((port->gs.xmit_cnt <= 0) || port->gs.tty->stopped ||
-			port->gs.tty->hw_stopped) {
+	if ((port->gs.xmit_cnt <= 0) || port->gs.port.tty->stopped ||
+	    port->gs.port.tty->hw_stopped) {
 		/* disable tx interrupts */
 		SCCmod (INT_AND_DMA_REG, ~IDR_TX_INT_ENAB, 0);
 		SCCwrite(COMMAND_REG, CR_TX_PENDING_RESET);   /* disable tx_int on next tx underrun? */
-		port->gs.flags &= ~GS_TX_INTEN;
+		port->gs.port.flags &= ~GS_TX_INTEN;
 	}
-	if (port->gs.tty && port->gs.xmit_cnt <= port->gs.wakeup_chars)
-		tty_wakeup(port->gs.tty);
+	if (port->gs.port.tty && port->gs.xmit_cnt <= port->gs.wakeup_chars)
+		tty_wakeup(port->gs.port.tty);
 
 	SCCwrite_NB(COMMAND_REG, CR_HIGHEST_IUS_RESET);
 	return IRQ_HANDLED;
@@ -550,14 +551,14 @@ static irqreturn_t scc_stat_int(int irq, void *data)
 
 	if (changed & SR_DCD) {
 		port->c_dcd = !!(sr & SR_DCD);
-		if (!(port->gs.flags & ASYNC_CHECK_CD))
+		if (!(port->gs.port.flags & ASYNC_CHECK_CD))
 			;	/* Don't report DCD changes */
 		else if (port->c_dcd) {
-			wake_up_interruptible(&port->gs.open_wait);
+			wake_up_interruptible(&port->gs.port.open_wait);
 		}
 		else {
-			if (port->gs.tty)
-				tty_hangup (port->gs.tty);
+			if (port->gs.port.tty)
+				tty_hangup (port->gs.port.tty);
 		}
 	}
 	SCCwrite(COMMAND_REG, CR_EXTSTAT_RESET);
@@ -578,7 +579,7 @@ static void scc_disable_tx_interrupts(void *ptr)
 
 	local_irq_save(flags);
 	SCCmod(INT_AND_DMA_REG, ~IDR_TX_INT_ENAB, 0);
-	port->gs.flags &= ~GS_TX_INTEN;
+	port->gs.port.flags &= ~GS_TX_INTEN;
 	local_irq_restore(flags);
 }
 
@@ -636,8 +637,8 @@ static void scc_shutdown_port(void *ptr)
 {
 	struct scc_port *port = ptr;
 
-	port->gs.flags &= ~ GS_ACTIVE;
-	if (port->gs.tty && port->gs.tty->termios->c_cflag & HUPCL) {
+	port->gs.port.flags &= ~ GS_ACTIVE;
+	if (port->gs.port.tty && port->gs.port.tty->termios->c_cflag & HUPCL) {
 		scc_setsignals (port, 0, 0);
 	}
 }
@@ -652,14 +653,14 @@ static int scc_set_real_termios (void *ptr)
 	struct scc_port *port = ptr;
 	SCC_ACCESS_INIT(port);
 
-	if (!port->gs.tty || !port->gs.tty->termios) return 0;
+	if (!port->gs.port.tty || !port->gs.port.tty->termios) return 0;
 
 	channel = port->channel;
 
 	if (channel == CHANNEL_A)
 		return 0;		/* Settings controlled by boot PROM */
 
-	cflag  = port->gs.tty->termios->c_cflag;
+	cflag  = port->gs.port.tty->termios->c_cflag;
 	baud = port->gs.baud;
 	chsize = (cflag & CSIZE) >> 4;
 
@@ -678,9 +679,9 @@ static int scc_set_real_termios (void *ptr)
 	}
 
 	if (cflag & CLOCAL)
-		port->gs.flags &= ~ASYNC_CHECK_CD;
+		port->gs.port.flags &= ~ASYNC_CHECK_CD;
 	else
-		port->gs.flags |= ASYNC_CHECK_CD;
+		port->gs.port.flags |= ASYNC_CHECK_CD;
 
 #ifdef CONFIG_MVME147_SCC
 	if (MACH_IS_MVME147)
@@ -856,7 +857,7 @@ static int scc_open (struct tty_struct * tty, struct file * filp)
 		{ COMMAND_REG, CR_EXTSTAT_RESET },
 	};
 #endif
-	if (!(port->gs.flags & ASYNC_INITIALIZED)) {
+	if (!(port->gs.port.flags & ASYNC_INITIALIZED)) {
 		local_irq_save(flags);
 #if defined(CONFIG_MVME147_SCC) || defined(CONFIG_MVME162_SCC)
 		if (MACH_IS_MVME147 || MACH_IS_MVME16x) {
@@ -880,18 +881,18 @@ static int scc_open (struct tty_struct * tty, struct file * filp)
 	}
 
 	tty->driver_data = port;
-	port->gs.tty = tty;
-	port->gs.count++;
+	port->gs.port.tty = tty;
+	port->gs.port.count++;
 	retval = gs_init_port(&port->gs);
 	if (retval) {
-		port->gs.count--;
+		port->gs.port.count--;
 		return retval;
 	}
-	port->gs.flags |= GS_ACTIVE;
+	port->gs.port.flags |= GS_ACTIVE;
 	retval = gs_block_til_ready(port, filp);
 
 	if (retval) {
-		port->gs.count--;
+		port->gs.port.count--;
 		return retval;
 	}
 
diff --git a/drivers/char/vt.c b/drivers/char/vt.c
index cb8c90da3934..60359c360912 100644
--- a/drivers/char/vt.c
+++ b/drivers/char/vt.c
@@ -803,7 +803,25 @@ static inline int resize_screen(struct vc_data *vc, int width, int height,
  */
 #define VC_RESIZE_MAXCOL (32767)
 #define VC_RESIZE_MAXROW (32767)
-int vc_resize(struct vc_data *vc, unsigned int cols, unsigned int lines)
+
+/**
+ *	vc_do_resize	-	resizing method for the tty
+ *	@tty: tty being resized
+ *	@real_tty: real tty (different to tty if a pty/tty pair)
+ *	@vc: virtual console private data
+ *	@cols: columns
+ *	@lines: lines
+ *
+ *	Resize a virtual console, clipping according to the actual constraints.
+ *	If the caller passes a tty structure then update the termios winsize
+ *	information and perform any neccessary signal handling.
+ *
+ *	Caller must hold the console semaphore. Takes the termios mutex and
+ *	ctrl_lock of the tty IFF a tty is passed.
+ */
+
+static int vc_do_resize(struct tty_struct *tty, struct tty_struct *real_tty,
+		struct vc_data *vc, unsigned int cols, unsigned int lines)
 {
 	unsigned long old_origin, new_origin, new_scr_end, rlth, rrem, err = 0;
 	unsigned int old_cols, old_rows, old_row_size, old_screen_size;
@@ -907,26 +925,15 @@ int vc_resize(struct vc_data *vc, unsigned int cols, unsigned int lines)
 	gotoxy(vc, vc->vc_x, vc->vc_y);
 	save_cur(vc);
 
-	if (vc->vc_tty) {
-		struct winsize ws, *cws = &vc->vc_tty->winsize;
-		struct pid *pgrp = NULL;
-
+	if (tty) {
+		/* Rewrite the requested winsize data with the actual
+		   resulting sizes */
+		struct winsize ws;
 		memset(&ws, 0, sizeof(ws));
 		ws.ws_row = vc->vc_rows;
 		ws.ws_col = vc->vc_cols;
 		ws.ws_ypixel = vc->vc_scan_lines;
-
-		mutex_lock(&vc->vc_tty->termios_mutex);
-		spin_lock_irq(&vc->vc_tty->ctrl_lock);
-		if ((ws.ws_row != cws->ws_row || ws.ws_col != cws->ws_col))
-			pgrp = get_pid(vc->vc_tty->pgrp);
-		spin_unlock_irq(&vc->vc_tty->ctrl_lock);
-		if (pgrp) {
-			kill_pgrp(vc->vc_tty->pgrp, SIGWINCH, 1);
-			put_pid(pgrp);
-		}
-		*cws = ws;
-		mutex_unlock(&vc->vc_tty->termios_mutex);
+		tty_do_resize(tty, real_tty, &ws);
 	}
 
 	if (CON_IS_VISIBLE(vc))
@@ -934,14 +941,47 @@ int vc_resize(struct vc_data *vc, unsigned int cols, unsigned int lines)
 	return err;
 }
 
-int vc_lock_resize(struct vc_data *vc, unsigned int cols, unsigned int lines)
+/**
+ *	vc_resize		-	resize a VT
+ *	@vc: virtual console
+ *	@cols: columns
+ *	@rows: rows
+ *
+ *	Resize a virtual console as seen from the console end of things. We
+ *	use the common vc_do_resize methods to update the structures. The
+ *	caller must hold the console sem to protect console internals and
+ *	vc->vc_tty
+ */
+
+int vc_resize(struct vc_data *vc, unsigned int cols, unsigned int rows)
+{
+	return vc_do_resize(vc->vc_tty, vc->vc_tty, vc, cols, rows);
+}
+
+/**
+ *	vt_resize		-	resize a VT
+ *	@tty: tty to resize
+ *	@real_tty: tty if a pty/tty pair
+ *	@ws: winsize attributes
+ *
+ *	Resize a virtual terminal. This is called by the tty layer as we
+ *	register our own handler for resizing. The mutual helper does all
+ *	the actual work.
+ *
+ *	Takes the console sem and the called methods then take the tty
+ *	termios_mutex and the tty ctrl_lock in that order.
+ */
+
+int vt_resize(struct tty_struct *tty, struct tty_struct *real_tty,
+	struct winsize *ws)
 {
-	int rc;
+	struct vc_data *vc = tty->driver_data;
+	int ret;
 
 	acquire_console_sem();
-	rc = vc_resize(vc, cols, lines);
+	ret = vc_do_resize(tty, real_tty, vc, ws->ws_col, ws->ws_row);
 	release_console_sem();
-	return rc;
+	return ret;
 }
 
 void vc_deallocate(unsigned int currcons)
@@ -2211,7 +2251,7 @@ rescan_last_byte:
 			c = 0xfffd;
 		    tc = c;
 		} else {	/* no utf or alternate charset mode */
-		    tc = vc->vc_translate[vc->vc_toggle_meta ? (c | 0x80) : c];
+		    tc = vc_translate(vc, c);
 		}
 
 		param.c = tc;
@@ -2909,6 +2949,7 @@ static const struct tty_operations con_ops = {
 	.start = con_start,
 	.throttle = con_throttle,
 	.unthrottle = con_unthrottle,
+	.resize = vt_resize,
 };
 
 int __init vty_init(void)
@@ -4063,7 +4104,6 @@ EXPORT_SYMBOL(default_blu);
 EXPORT_SYMBOL(update_region);
 EXPORT_SYMBOL(redraw_screen);
 EXPORT_SYMBOL(vc_resize);
-EXPORT_SYMBOL(vc_lock_resize);
 EXPORT_SYMBOL(fg_console);
 EXPORT_SYMBOL(console_blank_hook);
 EXPORT_SYMBOL(console_blanked);
diff --git a/drivers/char/vt_ioctl.c b/drivers/char/vt_ioctl.c
index 3211afd9d57e..c904e9ad4a71 100644
--- a/drivers/char/vt_ioctl.c
+++ b/drivers/char/vt_ioctl.c
@@ -947,14 +947,16 @@ int vt_ioctl(struct tty_struct *tty, struct file * file,
 		    get_user(cc, &vtsizes->v_cols))
 			ret = -EFAULT;
 		else {
+			acquire_console_sem();
 			for (i = 0; i < MAX_NR_CONSOLES; i++) {
 				vc = vc_cons[i].d;
 
 				if (vc) {
 					vc->vc_resize_user = 1;
-					vc_lock_resize(vc_cons[i].d, cc, ll);
+					vc_resize(vc_cons[i].d, cc, ll);
 				}
 			}
+			release_console_sem();
 		}
 		break;
 	}
diff --git a/drivers/char/xilinx_hwicap/buffer_icap.h b/drivers/char/xilinx_hwicap/buffer_icap.h
index c5b1840906b2..8b0252bf06e2 100644
--- a/drivers/char/xilinx_hwicap/buffer_icap.h
+++ b/drivers/char/xilinx_hwicap/buffer_icap.h
@@ -38,7 +38,6 @@
 
 #include <linux/types.h>
 #include <linux/cdev.h>
-#include <linux/version.h>
 #include <linux/platform_device.h>
 
 #include <asm/io.h>
diff --git a/drivers/char/xilinx_hwicap/fifo_icap.h b/drivers/char/xilinx_hwicap/fifo_icap.h
index ffabd3ba2bd8..62bda453c90b 100644
--- a/drivers/char/xilinx_hwicap/fifo_icap.h
+++ b/drivers/char/xilinx_hwicap/fifo_icap.h
@@ -38,7 +38,6 @@
 
 #include <linux/types.h>
 #include <linux/cdev.h>
-#include <linux/version.h>
 #include <linux/platform_device.h>
 
 #include <asm/io.h>
diff --git a/drivers/char/xilinx_hwicap/xilinx_hwicap.c b/drivers/char/xilinx_hwicap/xilinx_hwicap.c
index 51966ccf4ea3..278c9857bcf5 100644
--- a/drivers/char/xilinx_hwicap/xilinx_hwicap.c
+++ b/drivers/char/xilinx_hwicap/xilinx_hwicap.c
@@ -74,7 +74,6 @@
  * currently programmed in the FPGA.
  */
 
-#include <linux/version.h>
 #include <linux/module.h>
 #include <linux/kernel.h>
 #include <linux/types.h>
@@ -87,7 +86,6 @@
 #include <linux/mutex.h>
 #include <linux/smp_lock.h>
 #include <linux/sysctl.h>
-#include <linux/version.h>
 #include <linux/fs.h>
 #include <linux/cdev.h>
 #include <linux/platform_device.h>
diff --git a/drivers/char/xilinx_hwicap/xilinx_hwicap.h b/drivers/char/xilinx_hwicap/xilinx_hwicap.h
index 1f9c8b082dbe..24d0d9b938fb 100644
--- a/drivers/char/xilinx_hwicap/xilinx_hwicap.h
+++ b/drivers/char/xilinx_hwicap/xilinx_hwicap.h
@@ -38,7 +38,6 @@
 
 #include <linux/types.h>
 #include <linux/cdev.h>
-#include <linux/version.h>
 #include <linux/platform_device.h>
 
 #include <asm/io.h>
diff --git a/drivers/cpufreq/cpufreq.c b/drivers/cpufreq/cpufreq.c
index 8d6a3ff02672..8a67f16987db 100644
--- a/drivers/cpufreq/cpufreq.c
+++ b/drivers/cpufreq/cpufreq.c
@@ -825,6 +825,9 @@ static int cpufreq_add_dev(struct sys_device *sys_dev)
 	policy->user_policy.min = policy->cpuinfo.min_freq;
 	policy->user_policy.max = policy->cpuinfo.max_freq;
 
+	blocking_notifier_call_chain(&cpufreq_policy_notifier_list,
+				     CPUFREQ_START, policy);
+
 #ifdef CONFIG_SMP
 
 #ifdef CONFIG_HOTPLUG_CPU
diff --git a/drivers/cpufreq/cpufreq_conservative.c b/drivers/cpufreq/cpufreq_conservative.c
index fe565ee43757..ac0bbf2d234f 100644
--- a/drivers/cpufreq/cpufreq_conservative.c
+++ b/drivers/cpufreq/cpufreq_conservative.c
@@ -333,7 +333,7 @@ static void dbs_check_cpu(int cpu)
 {
 	unsigned int idle_ticks, up_idle_ticks, down_idle_ticks;
 	unsigned int tmp_idle_ticks, total_idle_ticks;
-	unsigned int freq_step;
+	unsigned int freq_target;
 	unsigned int freq_down_sampling_rate;
 	struct cpu_dbs_info_s *this_dbs_info = &per_cpu(cpu_dbs_info, cpu);
 	struct cpufreq_policy *policy;
@@ -383,13 +383,13 @@ static void dbs_check_cpu(int cpu)
 		if (this_dbs_info->requested_freq == policy->max)
 			return;
 
-		freq_step = (dbs_tuners_ins.freq_step * policy->max) / 100;
+		freq_target = (dbs_tuners_ins.freq_step * policy->max) / 100;
 
 		/* max freq cannot be less than 100. But who knows.... */
-		if (unlikely(freq_step == 0))
-			freq_step = 5;
+		if (unlikely(freq_target == 0))
+			freq_target = 5;
 
-		this_dbs_info->requested_freq += freq_step;
+		this_dbs_info->requested_freq += freq_target;
 		if (this_dbs_info->requested_freq > policy->max)
 			this_dbs_info->requested_freq = policy->max;
 
@@ -425,19 +425,19 @@ static void dbs_check_cpu(int cpu)
 		/*
 		 * if we are already at the lowest speed then break out early
 		 * or if we 'cannot' reduce the speed as the user might want
-		 * freq_step to be zero
+		 * freq_target to be zero
 		 */
 		if (this_dbs_info->requested_freq == policy->min
 				|| dbs_tuners_ins.freq_step == 0)
 			return;
 
-		freq_step = (dbs_tuners_ins.freq_step * policy->max) / 100;
+		freq_target = (dbs_tuners_ins.freq_step * policy->max) / 100;
 
 		/* max freq cannot be less than 100. But who knows.... */
-		if (unlikely(freq_step == 0))
-			freq_step = 5;
+		if (unlikely(freq_target == 0))
+			freq_target = 5;
 
-		this_dbs_info->requested_freq -= freq_step;
+		this_dbs_info->requested_freq -= freq_target;
 		if (this_dbs_info->requested_freq < policy->min)
 			this_dbs_info->requested_freq = policy->min;
 
diff --git a/drivers/cpuidle/cpuidle.c b/drivers/cpuidle/cpuidle.c
index 5405769020a1..5ce07b517c58 100644
--- a/drivers/cpuidle/cpuidle.c
+++ b/drivers/cpuidle/cpuidle.c
@@ -94,7 +94,7 @@ void cpuidle_install_idle_handler(void)
  */
 void cpuidle_uninstall_idle_handler(void)
 {
-	if (enabled_devices && (pm_idle != pm_idle_old)) {
+	if (enabled_devices && pm_idle_old && (pm_idle != pm_idle_old)) {
 		pm_idle = pm_idle_old;
 		cpuidle_kick_cpus();
 	}
diff --git a/drivers/cpuidle/governors/ladder.c b/drivers/cpuidle/governors/ladder.c
index ba7b9a6b17a1..a4bec3f919aa 100644
--- a/drivers/cpuidle/governors/ladder.c
+++ b/drivers/cpuidle/governors/ladder.c
@@ -67,10 +67,17 @@ static int ladder_select_state(struct cpuidle_device *dev)
 	struct ladder_device *ldev = &__get_cpu_var(ladder_devices);
 	struct ladder_device_state *last_state;
 	int last_residency, last_idx = ldev->last_state_idx;
+	int latency_req = pm_qos_requirement(PM_QOS_CPU_DMA_LATENCY);
 
 	if (unlikely(!ldev))
 		return 0;
 
+	/* Special case when user has set very strict latency requirement */
+	if (unlikely(latency_req == 0)) {
+		ladder_do_selection(ldev, last_idx, 0);
+		return 0;
+	}
+
 	last_state = &ldev->states[last_idx];
 
 	if (dev->states[last_idx].flags & CPUIDLE_FLAG_TIME_VALID)
@@ -81,8 +88,7 @@ static int ladder_select_state(struct cpuidle_device *dev)
 	/* consider promotion */
 	if (last_idx < dev->state_count - 1 &&
 	    last_residency > last_state->threshold.promotion_time &&
-	    dev->states[last_idx + 1].exit_latency <=
-			pm_qos_requirement(PM_QOS_CPU_DMA_LATENCY)) {
+	    dev->states[last_idx + 1].exit_latency <= latency_req) {
 		last_state->stats.promotion_count++;
 		last_state->stats.demotion_count = 0;
 		if (last_state->stats.promotion_count >= last_state->threshold.promotion_count) {
@@ -92,7 +98,19 @@ static int ladder_select_state(struct cpuidle_device *dev)
 	}
 
 	/* consider demotion */
-	if (last_idx > 0 &&
+	if (last_idx > CPUIDLE_DRIVER_STATE_START &&
+	    dev->states[last_idx].exit_latency > latency_req) {
+		int i;
+
+		for (i = last_idx - 1; i > CPUIDLE_DRIVER_STATE_START; i--) {
+			if (dev->states[i].exit_latency <= latency_req)
+				break;
+		}
+		ladder_do_selection(ldev, last_idx, i);
+		return i;
+	}
+
+	if (last_idx > CPUIDLE_DRIVER_STATE_START &&
 	    last_residency < last_state->threshold.demotion_time) {
 		last_state->stats.demotion_count++;
 		last_state->stats.promotion_count = 0;
@@ -117,7 +135,7 @@ static int ladder_enable_device(struct cpuidle_device *dev)
 	struct ladder_device_state *lstate;
 	struct cpuidle_state *state;
 
-	ldev->last_state_idx = 0;
+	ldev->last_state_idx = CPUIDLE_DRIVER_STATE_START;
 
 	for (i = 0; i < dev->state_count; i++) {
 		state = &dev->states[i];
diff --git a/drivers/cpuidle/governors/menu.c b/drivers/cpuidle/governors/menu.c
index 78d77c5dc35c..8d7cf3f31450 100644
--- a/drivers/cpuidle/governors/menu.c
+++ b/drivers/cpuidle/governors/menu.c
@@ -34,21 +34,28 @@ static DEFINE_PER_CPU(struct menu_device, menu_devices);
 static int menu_select(struct cpuidle_device *dev)
 {
 	struct menu_device *data = &__get_cpu_var(menu_devices);
+	int latency_req = pm_qos_requirement(PM_QOS_CPU_DMA_LATENCY);
 	int i;
 
+	/* Special case when user has set very strict latency requirement */
+	if (unlikely(latency_req == 0)) {
+		data->last_state_idx = 0;
+		return 0;
+	}
+
 	/* determine the expected residency time */
 	data->expected_us =
 		(u32) ktime_to_ns(tick_nohz_get_sleep_length()) / 1000;
 
 	/* find the deepest idle state that satisfies our constraints */
-	for (i = 1; i < dev->state_count; i++) {
+	for (i = CPUIDLE_DRIVER_STATE_START + 1; i < dev->state_count; i++) {
 		struct cpuidle_state *s = &dev->states[i];
 
 		if (s->target_residency > data->expected_us)
 			break;
 		if (s->target_residency > data->predicted_us)
 			break;
-		if (s->exit_latency > pm_qos_requirement(PM_QOS_CPU_DMA_LATENCY))
+		if (s->exit_latency > latency_req)
 			break;
 	}
 
@@ -67,9 +74,9 @@ static void menu_reflect(struct cpuidle_device *dev)
 {
 	struct menu_device *data = &__get_cpu_var(menu_devices);
 	int last_idx = data->last_state_idx;
-	unsigned int measured_us =
-		cpuidle_get_last_residency(dev) + data->elapsed_us;
+	unsigned int last_idle_us = cpuidle_get_last_residency(dev);
 	struct cpuidle_state *target = &dev->states[last_idx];
+	unsigned int measured_us;
 
 	/*
 	 * Ugh, this idle state doesn't support residency measurements, so we
@@ -77,20 +84,27 @@ static void menu_reflect(struct cpuidle_device *dev)
 	 * for one full standard timer tick.  However, be aware that this
 	 * could potentially result in a suboptimal state transition.
 	 */
-	if (!(target->flags & CPUIDLE_FLAG_TIME_VALID))
-		measured_us = USEC_PER_SEC / HZ;
+	if (unlikely(!(target->flags & CPUIDLE_FLAG_TIME_VALID)))
+		last_idle_us = USEC_PER_SEC / HZ;
+
+	/*
+	 * measured_us and elapsed_us are the cumulative idle time, since the
+	 * last time we were woken out of idle by an interrupt.
+	 */
+	if (data->elapsed_us <= data->elapsed_us + last_idle_us)
+		measured_us = data->elapsed_us + last_idle_us;
+	else
+		measured_us = -1;
+
+	/* Predict time until next break event */
+	data->predicted_us = max(measured_us, data->last_measured_us);
 
-	/* Predict time remaining until next break event */
-	if (measured_us + BREAK_FUZZ < data->expected_us - target->exit_latency) {
-		data->predicted_us = max(measured_us, data->last_measured_us);
+	if (last_idle_us + BREAK_FUZZ <
+	    data->expected_us - target->exit_latency) {
 		data->last_measured_us = measured_us;
 		data->elapsed_us = 0;
 	} else {
-		if (data->elapsed_us < data->elapsed_us + measured_us)
-			data->elapsed_us = measured_us;
-		else
-			data->elapsed_us = -1;
-		data->predicted_us = max(measured_us, data->last_measured_us);
+		data->elapsed_us = measured_us;
 	}
 }
 
diff --git a/drivers/cpuidle/sysfs.c b/drivers/cpuidle/sysfs.c
index 31a0e0b455b6..97b003839fb6 100644
--- a/drivers/cpuidle/sysfs.c
+++ b/drivers/cpuidle/sysfs.c
@@ -21,8 +21,8 @@ static int __init cpuidle_sysfs_setup(char *unused)
 }
 __setup("cpuidle_sysfs_switch", cpuidle_sysfs_setup);
 
-static ssize_t show_available_governors(struct sys_device *dev,
-		struct sysdev_attribute *attr, char *buf)
+static ssize_t show_available_governors(struct sysdev_class *class,
+					char *buf)
 {
 	ssize_t i = 0;
 	struct cpuidle_governor *tmp;
@@ -40,8 +40,8 @@ out:
 	return i;
 }
 
-static ssize_t show_current_driver(struct sys_device *dev,
-		struct sysdev_attribute *attr, char *buf)
+static ssize_t show_current_driver(struct sysdev_class *class,
+				   char *buf)
 {
 	ssize_t ret;
 
@@ -55,8 +55,8 @@ static ssize_t show_current_driver(struct sys_device *dev,
 	return ret;
 }
 
-static ssize_t show_current_governor(struct sys_device *dev,
-			struct sysdev_attribute *attr, char *buf)
+static ssize_t show_current_governor(struct sysdev_class *class,
+				     char *buf)
 {
 	ssize_t ret;
 
@@ -70,9 +70,8 @@ static ssize_t show_current_governor(struct sys_device *dev,
 	return ret;
 }
 
-static ssize_t store_current_governor(struct sys_device *dev,
-	struct sysdev_attribute *attr,
-	const char *buf, size_t count)
+static ssize_t store_current_governor(struct sysdev_class *class,
+				      const char *buf, size_t count)
 {
 	char gov_name[CPUIDLE_NAME_LEN];
 	int ret = -EINVAL;
@@ -104,8 +103,9 @@ static ssize_t store_current_governor(struct sys_device *dev,
 		return count;
 }
 
-static SYSDEV_ATTR(current_driver, 0444, show_current_driver, NULL);
-static SYSDEV_ATTR(current_governor_ro, 0444, show_current_governor, NULL);
+static SYSDEV_CLASS_ATTR(current_driver, 0444, show_current_driver, NULL);
+static SYSDEV_CLASS_ATTR(current_governor_ro, 0444, show_current_governor,
+			 NULL);
 
 static struct attribute *cpuclass_default_attrs[] = {
 	&attr_current_driver.attr,
@@ -113,9 +113,10 @@ static struct attribute *cpuclass_default_attrs[] = {
 	NULL
 };
 
-static SYSDEV_ATTR(available_governors, 0444, show_available_governors, NULL);
-static SYSDEV_ATTR(current_governor, 0644, show_current_governor,
-	store_current_governor);
+static SYSDEV_CLASS_ATTR(available_governors, 0444, show_available_governors,
+			 NULL);
+static SYSDEV_CLASS_ATTR(current_governor, 0644, show_current_governor,
+			 store_current_governor);
 
 static struct attribute *cpuclass_switch_attrs[] = {
 	&attr_available_governors.attr,
diff --git a/drivers/crypto/ixp4xx_crypto.c b/drivers/crypto/ixp4xx_crypto.c
index 42a107fe9233..2d637e0fbc03 100644
--- a/drivers/crypto/ixp4xx_crypto.c
+++ b/drivers/crypto/ixp4xx_crypto.c
@@ -27,8 +27,8 @@
 #include <crypto/authenc.h>
 #include <crypto/scatterwalk.h>
 
-#include <asm/arch/npe.h>
-#include <asm/arch/qmgr.h>
+#include <mach/npe.h>
+#include <mach/qmgr.h>
 
 #define MAX_KEYLEN 32
 
diff --git a/drivers/crypto/padlock-aes.c b/drivers/crypto/padlock-aes.c
index 54a2a166e566..bf2917d197a0 100644
--- a/drivers/crypto/padlock-aes.c
+++ b/drivers/crypto/padlock-aes.c
@@ -16,6 +16,7 @@
 #include <linux/interrupt.h>
 #include <linux/kernel.h>
 #include <asm/byteorder.h>
+#include <asm/i387.h>
 #include "padlock.h"
 
 /* Control word. */
@@ -141,6 +142,12 @@ static inline void padlock_reset_key(void)
 	asm volatile ("pushfl; popfl");
 }
 
+/*
+ * While the padlock instructions don't use FP/SSE registers, they
+ * generate a spurious DNA fault when cr0.ts is '1'. These instructions
+ * should be used only inside the irq_ts_save/restore() context
+ */
+
 static inline void padlock_xcrypt(const u8 *input, u8 *output, void *key,
 				  void *control_word)
 {
@@ -205,15 +212,23 @@ static inline u8 *padlock_xcrypt_cbc(const u8 *input, u8 *output, void *key,
 static void aes_encrypt(struct crypto_tfm *tfm, u8 *out, const u8 *in)
 {
 	struct aes_ctx *ctx = aes_ctx(tfm);
+	int ts_state;
 	padlock_reset_key();
+
+	ts_state = irq_ts_save();
 	aes_crypt(in, out, ctx->E, &ctx->cword.encrypt);
+	irq_ts_restore(ts_state);
 }
 
 static void aes_decrypt(struct crypto_tfm *tfm, u8 *out, const u8 *in)
 {
 	struct aes_ctx *ctx = aes_ctx(tfm);
+	int ts_state;
 	padlock_reset_key();
+
+	ts_state = irq_ts_save();
 	aes_crypt(in, out, ctx->D, &ctx->cword.decrypt);
+	irq_ts_restore(ts_state);
 }
 
 static struct crypto_alg aes_alg = {
@@ -244,12 +259,14 @@ static int ecb_aes_encrypt(struct blkcipher_desc *desc,
 	struct aes_ctx *ctx = blk_aes_ctx(desc->tfm);
 	struct blkcipher_walk walk;
 	int err;
+	int ts_state;
 
 	padlock_reset_key();
 
 	blkcipher_walk_init(&walk, dst, src, nbytes);
 	err = blkcipher_walk_virt(desc, &walk);
 
+	ts_state = irq_ts_save();
 	while ((nbytes = walk.nbytes)) {
 		padlock_xcrypt_ecb(walk.src.virt.addr, walk.dst.virt.addr,
 				   ctx->E, &ctx->cword.encrypt,
@@ -257,6 +274,7 @@ static int ecb_aes_encrypt(struct blkcipher_desc *desc,
 		nbytes &= AES_BLOCK_SIZE - 1;
 		err = blkcipher_walk_done(desc, &walk, nbytes);
 	}
+	irq_ts_restore(ts_state);
 
 	return err;
 }
@@ -268,12 +286,14 @@ static int ecb_aes_decrypt(struct blkcipher_desc *desc,
 	struct aes_ctx *ctx = blk_aes_ctx(desc->tfm);
 	struct blkcipher_walk walk;
 	int err;
+	int ts_state;
 
 	padlock_reset_key();
 
 	blkcipher_walk_init(&walk, dst, src, nbytes);
 	err = blkcipher_walk_virt(desc, &walk);
 
+	ts_state = irq_ts_save();
 	while ((nbytes = walk.nbytes)) {
 		padlock_xcrypt_ecb(walk.src.virt.addr, walk.dst.virt.addr,
 				   ctx->D, &ctx->cword.decrypt,
@@ -281,7 +301,7 @@ static int ecb_aes_decrypt(struct blkcipher_desc *desc,
 		nbytes &= AES_BLOCK_SIZE - 1;
 		err = blkcipher_walk_done(desc, &walk, nbytes);
 	}
-
+	irq_ts_restore(ts_state);
 	return err;
 }
 
@@ -314,12 +334,14 @@ static int cbc_aes_encrypt(struct blkcipher_desc *desc,
 	struct aes_ctx *ctx = blk_aes_ctx(desc->tfm);
 	struct blkcipher_walk walk;
 	int err;
+	int ts_state;
 
 	padlock_reset_key();
 
 	blkcipher_walk_init(&walk, dst, src, nbytes);
 	err = blkcipher_walk_virt(desc, &walk);
 
+	ts_state = irq_ts_save();
 	while ((nbytes = walk.nbytes)) {
 		u8 *iv = padlock_xcrypt_cbc(walk.src.virt.addr,
 					    walk.dst.virt.addr, ctx->E,
@@ -329,6 +351,7 @@ static int cbc_aes_encrypt(struct blkcipher_desc *desc,
 		nbytes &= AES_BLOCK_SIZE - 1;
 		err = blkcipher_walk_done(desc, &walk, nbytes);
 	}
+	irq_ts_restore(ts_state);
 
 	return err;
 }
@@ -340,12 +363,14 @@ static int cbc_aes_decrypt(struct blkcipher_desc *desc,
 	struct aes_ctx *ctx = blk_aes_ctx(desc->tfm);
 	struct blkcipher_walk walk;
 	int err;
+	int ts_state;
 
 	padlock_reset_key();
 
 	blkcipher_walk_init(&walk, dst, src, nbytes);
 	err = blkcipher_walk_virt(desc, &walk);
 
+	ts_state = irq_ts_save();
 	while ((nbytes = walk.nbytes)) {
 		padlock_xcrypt_cbc(walk.src.virt.addr, walk.dst.virt.addr,
 				   ctx->D, walk.iv, &ctx->cword.decrypt,
@@ -354,6 +379,7 @@ static int cbc_aes_decrypt(struct blkcipher_desc *desc,
 		err = blkcipher_walk_done(desc, &walk, nbytes);
 	}
 
+	irq_ts_restore(ts_state);
 	return err;
 }
 
diff --git a/drivers/crypto/padlock-sha.c b/drivers/crypto/padlock-sha.c
index 40d5680fa013..a7fbadebf623 100644
--- a/drivers/crypto/padlock-sha.c
+++ b/drivers/crypto/padlock-sha.c
@@ -22,6 +22,7 @@
 #include <linux/interrupt.h>
 #include <linux/kernel.h>
 #include <linux/scatterlist.h>
+#include <asm/i387.h>
 #include "padlock.h"
 
 #define SHA1_DEFAULT_FALLBACK	"sha1-generic"
@@ -102,6 +103,7 @@ static void padlock_do_sha1(const char *in, char *out, int count)
 	 *     PadLock microcode needs it that big. */
 	char buf[128+16];
 	char *result = NEAREST_ALIGNED(buf);
+	int ts_state;
 
 	((uint32_t *)result)[0] = SHA1_H0;
 	((uint32_t *)result)[1] = SHA1_H1;
@@ -109,9 +111,12 @@ static void padlock_do_sha1(const char *in, char *out, int count)
 	((uint32_t *)result)[3] = SHA1_H3;
 	((uint32_t *)result)[4] = SHA1_H4;
  
+	/* prevent taking the spurious DNA fault with padlock. */
+	ts_state = irq_ts_save();
 	asm volatile (".byte 0xf3,0x0f,0xa6,0xc8" /* rep xsha1 */
 		      : "+S"(in), "+D"(result)
 		      : "c"(count), "a"(0));
+	irq_ts_restore(ts_state);
 
 	padlock_output_block((uint32_t *)result, (uint32_t *)out, 5);
 }
@@ -123,6 +128,7 @@ static void padlock_do_sha256(const char *in, char *out, int count)
 	 *     PadLock microcode needs it that big. */
 	char buf[128+16];
 	char *result = NEAREST_ALIGNED(buf);
+	int ts_state;
 
 	((uint32_t *)result)[0] = SHA256_H0;
 	((uint32_t *)result)[1] = SHA256_H1;
@@ -133,9 +139,12 @@ static void padlock_do_sha256(const char *in, char *out, int count)
 	((uint32_t *)result)[6] = SHA256_H6;
 	((uint32_t *)result)[7] = SHA256_H7;
 
+	/* prevent taking the spurious DNA fault with padlock. */
+	ts_state = irq_ts_save();
 	asm volatile (".byte 0xf3,0x0f,0xa6,0xd0" /* rep xsha256 */
 		      : "+S"(in), "+D"(result)
 		      : "c"(count), "a"(0));
+	irq_ts_restore(ts_state);
 
 	padlock_output_block((uint32_t *)result, (uint32_t *)out, 8);
 }
diff --git a/drivers/crypto/talitos.c b/drivers/crypto/talitos.c
index b11943dadefd..ee827a7f7c6a 100644
--- a/drivers/crypto/talitos.c
+++ b/drivers/crypto/talitos.c
@@ -96,9 +96,15 @@ struct talitos_private {
 	unsigned int exec_units;
 	unsigned int desc_types;
 
+	/* SEC Compatibility info */
+	unsigned long features;
+
 	/* next channel to be assigned next incoming descriptor */
 	atomic_t last_chan;
 
+	/* per-channel number of requests pending in channel h/w fifo */
+	atomic_t *submit_count;
+
 	/* per-channel request fifo */
 	struct talitos_request **fifo;
 
@@ -130,6 +136,9 @@ struct talitos_private {
 	struct hwrng rng;
 };
 
+/* .features flag */
+#define TALITOS_FTR_SRC_LINK_TBL_LEN_INCLUDES_EXTENT 0x00000001
+
 /*
  * map virtual single (contiguous) pointer to h/w descriptor pointer
  */
@@ -263,15 +272,15 @@ static int talitos_submit(struct device *dev, struct talitos_desc *desc,
 
 	spin_lock_irqsave(&priv->head_lock[ch], flags);
 
-	head = priv->head[ch];
-	request = &priv->fifo[ch][head];
-
-	if (request->desc) {
-		/* request queue is full */
+	if (!atomic_inc_not_zero(&priv->submit_count[ch])) {
+		/* h/w fifo is full */
 		spin_unlock_irqrestore(&priv->head_lock[ch], flags);
 		return -EAGAIN;
 	}
 
+	head = priv->head[ch];
+	request = &priv->fifo[ch][head];
+
 	/* map descriptor and save caller data */
 	request->dma_desc = dma_map_single(dev, desc, sizeof(*desc),
 					   DMA_BIDIRECTIONAL);
@@ -335,6 +344,9 @@ static void flush_channel(struct device *dev, int ch, int error, int reset_ch)
 		priv->tail[ch] = (tail + 1) & (priv->fifo_len - 1);
 
 		spin_unlock_irqrestore(&priv->tail_lock[ch], flags);
+
+		atomic_dec(&priv->submit_count[ch]);
+
 		saved_req.callback(dev, saved_req.desc, saved_req.context,
 				   status);
 		/* channel may resume processing in single desc error case */
@@ -779,7 +791,7 @@ static void ipsec_esp_encrypt_done(struct device *dev,
 	/* copy the generated ICV to dst */
 	if (edesc->dma_len) {
 		icvdata = &edesc->link_tbl[edesc->src_nents +
-					   edesc->dst_nents + 1];
+					   edesc->dst_nents + 2];
 		sg = sg_last(areq->dst, edesc->dst_nents);
 		memcpy((char *)sg_virt(sg) + sg->length - ctx->authsize,
 		       icvdata, ctx->authsize);
@@ -808,7 +820,7 @@ static void ipsec_esp_decrypt_done(struct device *dev,
 		/* auth check */
 		if (edesc->dma_len)
 			icvdata = &edesc->link_tbl[edesc->src_nents +
-						   edesc->dst_nents + 1];
+						   edesc->dst_nents + 2];
 		else
 			icvdata = &edesc->link_tbl[0];
 
@@ -842,7 +854,7 @@ static int sg_to_link_tbl(struct scatterlist *sg, int sg_count,
 
 	/* adjust (decrease) last one (or two) entry's len to cryptlen */
 	link_tbl_ptr--;
-	while (link_tbl_ptr->len <= (-cryptlen)) {
+	while (be16_to_cpu(link_tbl_ptr->len) <= (-cryptlen)) {
 		/* Empty this entry, and move to previous one */
 		cryptlen += be16_to_cpu(link_tbl_ptr->len);
 		link_tbl_ptr->len = 0;
@@ -874,7 +886,7 @@ static int ipsec_esp(struct ipsec_esp_edesc *edesc, struct aead_request *areq,
 	unsigned int cryptlen = areq->cryptlen;
 	unsigned int authsize = ctx->authsize;
 	unsigned int ivsize;
-	int sg_count;
+	int sg_count, ret;
 
 	/* hmac key */
 	map_single_talitos_ptr(dev, &desc->ptr[0], ctx->authkeylen, &ctx->key,
@@ -915,10 +927,30 @@ static int ipsec_esp(struct ipsec_esp_edesc *edesc, struct aead_request *areq,
 		sg_count = sg_to_link_tbl(areq->src, sg_count, cryptlen,
 					  &edesc->link_tbl[0]);
 		if (sg_count > 1) {
+			struct talitos_ptr *link_tbl_ptr =
+				&edesc->link_tbl[sg_count-1];
+			struct scatterlist *sg;
+			struct talitos_private *priv = dev_get_drvdata(dev);
+
 			desc->ptr[4].j_extent |= DESC_PTR_LNKTBL_JUMP;
 			desc->ptr[4].ptr = cpu_to_be32(edesc->dma_link_tbl);
 			dma_sync_single_for_device(ctx->dev, edesc->dma_link_tbl,
 						   edesc->dma_len, DMA_BIDIRECTIONAL);
+			/* If necessary for this SEC revision,
+			 * add a link table entry for ICV.
+			 */
+			if ((priv->features &
+			     TALITOS_FTR_SRC_LINK_TBL_LEN_INCLUDES_EXTENT) &&
+			    (edesc->desc.hdr & DESC_HDR_MODE0_ENCRYPT) == 0) {
+				link_tbl_ptr->j_extent = 0;
+				link_tbl_ptr++;
+				link_tbl_ptr->j_extent = DESC_PTR_LNKTBL_RETURN;
+				link_tbl_ptr->len = cpu_to_be16(authsize);
+				sg = sg_last(areq->src, edesc->src_nents ? : 1);
+				link_tbl_ptr->ptr = cpu_to_be32(
+						(char *)sg_dma_address(sg)
+						+ sg->length - authsize);
+			}
 		} else {
 			/* Only one segment now, so no link tbl needed */
 			desc->ptr[4].ptr = cpu_to_be32(sg_dma_address(areq->src));
@@ -938,12 +970,11 @@ static int ipsec_esp(struct ipsec_esp_edesc *edesc, struct aead_request *areq,
 		desc->ptr[5].ptr = cpu_to_be32(sg_dma_address(areq->dst));
 	} else {
 		struct talitos_ptr *link_tbl_ptr =
-			&edesc->link_tbl[edesc->src_nents];
-		struct scatterlist *sg;
+			&edesc->link_tbl[edesc->src_nents + 1];
 
 		desc->ptr[5].ptr = cpu_to_be32((struct talitos_ptr *)
 					       edesc->dma_link_tbl +
-					       edesc->src_nents);
+					       edesc->src_nents + 1);
 		if (areq->src == areq->dst) {
 			memcpy(link_tbl_ptr, &edesc->link_tbl[0],
 			       edesc->src_nents * sizeof(struct talitos_ptr));
@@ -951,14 +982,10 @@ static int ipsec_esp(struct ipsec_esp_edesc *edesc, struct aead_request *areq,
 			sg_count = sg_to_link_tbl(areq->dst, sg_count, cryptlen,
 						  link_tbl_ptr);
 		}
+		/* Add an entry to the link table for ICV data */
 		link_tbl_ptr += sg_count - 1;
-
-		/* handle case where sg_last contains the ICV exclusively */
-		sg = sg_last(areq->dst, edesc->dst_nents);
-		if (sg->length == ctx->authsize)
-			link_tbl_ptr--;
-
 		link_tbl_ptr->j_extent = 0;
+		sg_count++;
 		link_tbl_ptr++;
 		link_tbl_ptr->j_extent = DESC_PTR_LNKTBL_RETURN;
 		link_tbl_ptr->len = cpu_to_be16(authsize);
@@ -967,7 +994,7 @@ static int ipsec_esp(struct ipsec_esp_edesc *edesc, struct aead_request *areq,
 		link_tbl_ptr->ptr = cpu_to_be32((struct talitos_ptr *)
 						edesc->dma_link_tbl +
 					        edesc->src_nents +
-						edesc->dst_nents + 1);
+						edesc->dst_nents + 2);
 
 		desc->ptr[5].j_extent |= DESC_PTR_LNKTBL_JUMP;
 		dma_sync_single_for_device(ctx->dev, edesc->dma_link_tbl,
@@ -978,7 +1005,12 @@ static int ipsec_esp(struct ipsec_esp_edesc *edesc, struct aead_request *areq,
 	map_single_talitos_ptr(dev, &desc->ptr[6], ivsize, ctx->iv, 0,
 			       DMA_FROM_DEVICE);
 
-	return talitos_submit(dev, desc, callback, areq);
+	ret = talitos_submit(dev, desc, callback, areq);
+	if (ret != -EINPROGRESS) {
+		ipsec_esp_unmap(dev, edesc, areq);
+		kfree(edesc);
+	}
+	return ret;
 }
 
 
@@ -1009,6 +1041,8 @@ static struct ipsec_esp_edesc *ipsec_esp_edesc_alloc(struct aead_request *areq,
 	struct talitos_ctx *ctx = crypto_aead_ctx(authenc);
 	struct ipsec_esp_edesc *edesc;
 	int src_nents, dst_nents, alloc_len, dma_len;
+	gfp_t flags = areq->base.flags & CRYPTO_TFM_REQ_MAY_SLEEP ? GFP_KERNEL :
+		      GFP_ATOMIC;
 
 	if (areq->cryptlen + ctx->authsize > TALITOS_MAX_DATA_LEN) {
 		dev_err(ctx->dev, "cryptlen exceeds h/w max limit\n");
@@ -1022,17 +1056,17 @@ static struct ipsec_esp_edesc *ipsec_esp_edesc_alloc(struct aead_request *areq,
 		dst_nents = src_nents;
 	} else {
 		dst_nents = sg_count(areq->dst, areq->cryptlen + ctx->authsize);
-		dst_nents = (dst_nents == 1) ? 0 : src_nents;
+		dst_nents = (dst_nents == 1) ? 0 : dst_nents;
 	}
 
 	/*
 	 * allocate space for base edesc plus the link tables,
-	 * allowing for a separate entry for the generated ICV (+ 1),
+	 * allowing for two separate entries for ICV and generated ICV (+ 2),
 	 * and the ICV data itself
 	 */
 	alloc_len = sizeof(struct ipsec_esp_edesc);
 	if (src_nents || dst_nents) {
-		dma_len = (src_nents + dst_nents + 1) *
+		dma_len = (src_nents + dst_nents + 2) *
 				 sizeof(struct talitos_ptr) + ctx->authsize;
 		alloc_len += dma_len;
 	} else {
@@ -1040,7 +1074,7 @@ static struct ipsec_esp_edesc *ipsec_esp_edesc_alloc(struct aead_request *areq,
 		alloc_len += icv_stashing ? ctx->authsize : 0;
 	}
 
-	edesc = kmalloc(alloc_len, GFP_DMA);
+	edesc = kmalloc(alloc_len, GFP_DMA | flags);
 	if (!edesc) {
 		dev_err(ctx->dev, "could not allocate edescriptor\n");
 		return ERR_PTR(-ENOMEM);
@@ -1091,7 +1125,7 @@ static int aead_authenc_decrypt(struct aead_request *req)
 	/* stash incoming ICV for later cmp with ICV generated by the h/w */
 	if (edesc->dma_len)
 		icvdata = &edesc->link_tbl[edesc->src_nents +
-					   edesc->dst_nents + 1];
+					   edesc->dst_nents + 2];
 	else
 		icvdata = &edesc->link_tbl[0];
 
@@ -1337,6 +1371,7 @@ static int __devexit talitos_remove(struct of_device *ofdev)
 	if (hw_supports(dev, DESC_HDR_SEL0_RNG))
 		talitos_unregister_rng(dev);
 
+	kfree(priv->submit_count);
 	kfree(priv->tail);
 	kfree(priv->head);
 
@@ -1466,8 +1501,8 @@ static int talitos_probe(struct of_device *ofdev,
 		goto err_out;
 	}
 
-	of_node_put(np);
-	np = NULL;
+	if (of_device_is_compatible(np, "fsl,sec3.0"))
+		priv->features |= TALITOS_FTR_SRC_LINK_TBL_LEN_INCLUDES_EXTENT;
 
 	priv->head_lock = kmalloc(sizeof(spinlock_t) * priv->num_channels,
 				  GFP_KERNEL);
@@ -1504,6 +1539,16 @@ static int talitos_probe(struct of_device *ofdev,
 		}
 	}
 
+	priv->submit_count = kmalloc(sizeof(atomic_t) * priv->num_channels,
+				     GFP_KERNEL);
+	if (!priv->submit_count) {
+		dev_err(dev, "failed to allocate fifo submit count space\n");
+		err = -ENOMEM;
+		goto err_out;
+	}
+	for (i = 0; i < priv->num_channels; i++)
+		atomic_set(&priv->submit_count[i], -priv->chfifo_len);
+
 	priv->head = kzalloc(sizeof(int) * priv->num_channels, GFP_KERNEL);
 	priv->tail = kzalloc(sizeof(int) * priv->num_channels, GFP_KERNEL);
 	if (!priv->head || !priv->tail) {
@@ -1559,8 +1604,6 @@ static int talitos_probe(struct of_device *ofdev,
 
 err_out:
 	talitos_remove(ofdev);
-	if (np)
-		of_node_put(np);
 
 	return err;
 }
diff --git a/drivers/dma/ioat_dma.c b/drivers/dma/ioat_dma.c
index a52156e56886..bc8c6e3470ca 100644
--- a/drivers/dma/ioat_dma.c
+++ b/drivers/dma/ioat_dma.c
@@ -551,7 +551,7 @@ static dma_cookie_t ioat1_tx_submit(struct dma_async_tx_descriptor *tx)
 	/* write address into NextDescriptor field of last desc in chain */
 	to_ioat_desc(ioat_chan->used_desc.prev)->hw->next =
 							first->async_tx.phys;
-	__list_splice(&new_chain, ioat_chan->used_desc.prev);
+	list_splice_tail(&new_chain, &ioat_chan->used_desc);
 
 	ioat_chan->dmacount += desc_count;
 	ioat_chan->pending += desc_count;
diff --git a/drivers/dma/iop-adma.c b/drivers/dma/iop-adma.c
index 85bfeba4d85e..71fba82462cb 100644
--- a/drivers/dma/iop-adma.c
+++ b/drivers/dma/iop-adma.c
@@ -33,7 +33,7 @@
 #include <linux/memory.h>
 #include <linux/ioport.h>
 
-#include <asm/arch/adma.h>
+#include <mach/adma.h>
 
 #define to_iop_adma_chan(chan) container_of(chan, struct iop_adma_chan, common)
 #define to_iop_adma_device(dev) \
diff --git a/drivers/dma/mv_xor.c b/drivers/dma/mv_xor.c
index a4e4494663bf..0328da020a10 100644
--- a/drivers/dma/mv_xor.c
+++ b/drivers/dma/mv_xor.c
@@ -25,7 +25,7 @@
 #include <linux/interrupt.h>
 #include <linux/platform_device.h>
 #include <linux/memory.h>
-#include <asm/plat-orion/mv_xor.h>
+#include <plat/mv_xor.h>
 #include "mv_xor.h"
 
 static void mv_xor_issue_pending(struct dma_chan *chan);
diff --git a/drivers/edac/Kconfig b/drivers/edac/Kconfig
index 6e6c3c4aea6b..5a11e3cbcae2 100644
--- a/drivers/edac/Kconfig
+++ b/drivers/edac/Kconfig
@@ -123,6 +123,13 @@ config EDAC_I5000
 	  Support for error detection and correction the Intel
 	  Greekcreek/Blackford chipsets.
 
+config EDAC_I5100
+	tristate "Intel San Clemente MCH"
+	depends on EDAC_MM_EDAC && X86 && PCI
+	help
+	  Support for error detection and correction the Intel
+	  San Clemente MCH.
+
 config EDAC_MPC85XX
 	tristate "Freescale MPC85xx"
 	depends on EDAC_MM_EDAC && FSL_SOC && MPC85xx
diff --git a/drivers/edac/Makefile b/drivers/edac/Makefile
index 83807731d4a9..e5e9104b5520 100644
--- a/drivers/edac/Makefile
+++ b/drivers/edac/Makefile
@@ -19,6 +19,7 @@ endif
 
 obj-$(CONFIG_EDAC_AMD76X)		+= amd76x_edac.o
 obj-$(CONFIG_EDAC_I5000)		+= i5000_edac.o
+obj-$(CONFIG_EDAC_I5100)		+= i5100_edac.o
 obj-$(CONFIG_EDAC_E7XXX)		+= e7xxx_edac.o
 obj-$(CONFIG_EDAC_E752X)		+= e752x_edac.o
 obj-$(CONFIG_EDAC_I82443BXGX)		+= i82443bxgx_edac.o
diff --git a/drivers/edac/e752x_edac.c b/drivers/edac/e752x_edac.c
index c94a0eb492cb..facfdb1fa71c 100644
--- a/drivers/edac/e752x_edac.c
+++ b/drivers/edac/e752x_edac.c
@@ -28,6 +28,7 @@
 #define E752X_REVISION	" Ver: 2.0.2 " __DATE__
 #define EDAC_MOD_STR	"e752x_edac"
 
+static int report_non_memory_errors;
 static int force_function_unhide;
 static int sysbus_parity = -1;
 
@@ -117,7 +118,7 @@ static struct edac_pci_ctl_info *e752x_pci;
 #define E752X_BUF_FERR		0x70	/* Memory buffer first error reg (8b) */
 #define E752X_BUF_NERR		0x72	/* Memory buffer next error reg (8b) */
 #define E752X_BUF_ERRMASK	0x74	/* Memory buffer error mask reg (8b) */
-#define E752X_BUF_SMICMD	0x7A	/* Memory buffer SMI command reg (8b) */
+#define E752X_BUF_SMICMD	0x7A	/* Memory buffer SMI cmd reg (8b) */
 #define E752X_DRAM_FERR		0x80	/* DRAM first error register (16b) */
 #define E752X_DRAM_NERR		0x82	/* DRAM next error register (16b) */
 #define E752X_DRAM_ERRMASK	0x84	/* DRAM error mask register (8b) */
@@ -127,7 +128,7 @@ static struct edac_pci_ctl_info *e752x_pci;
 					/*     error address register (32b) */
 					/*
 					 * 31    Reserved
-					 * 30:2  CE address (64 byte block 34:6)
+					 * 30:2  CE address (64 byte block 34:6
 					 * 1     Reserved
 					 * 0     HiLoCS
 					 */
@@ -147,11 +148,11 @@ static struct edac_pci_ctl_info *e752x_pci;
 					 * 1     Reserved
 					 * 0     HiLoCS
 					 */
-#define E752X_DRAM_SCRB_ADD	0xA8	/* DRAM first uncorrectable scrub memory */
+#define E752X_DRAM_SCRB_ADD	0xA8	/* DRAM 1st uncorrectable scrub mem */
 					/*     error address register (32b) */
 					/*
 					 * 31    Reserved
-					 * 30:2  CE address (64 byte block 34:6)
+					 * 30:2  CE address (64 byte block 34:6
 					 * 1     Reserved
 					 * 0     HiLoCS
 					 */
@@ -394,9 +395,12 @@ static void do_process_ded_retry(struct mem_ctl_info *mci, u16 error,
 	struct e752x_pvt *pvt = (struct e752x_pvt *)mci->pvt_info;
 
 	error_1b = retry_add;
-	page = error_1b >> (PAGE_SHIFT - 4);	/* convert the addr to 4k page */
-	row = pvt->mc_symmetric ? ((page >> 1) & 3) :	/* chip select are bits 14 & 13 */
+	page = error_1b >> (PAGE_SHIFT - 4);  /* convert the addr to 4k page */
+
+	/* chip select are bits 14 & 13 */
+	row = pvt->mc_symmetric ? ((page >> 1) & 3) :
 		edac_mc_find_csrow_by_page(mci, page);
+
 	e752x_mc_printk(mci, KERN_WARNING,
 			"CE page 0x%lx, row %d : Memory read retry\n",
 			(long unsigned int)page, row);
@@ -422,12 +426,21 @@ static inline void process_threshold_ce(struct mem_ctl_info *mci, u16 error,
 }
 
 static char *global_message[11] = {
-	"PCI Express C1", "PCI Express C", "PCI Express B1",
-	"PCI Express B", "PCI Express A1", "PCI Express A",
-	"DMA Controler", "HUB or NS Interface", "System Bus",
-	"DRAM Controler", "Internal Buffer"
+	"PCI Express C1",
+	"PCI Express C",
+	"PCI Express B1",
+	"PCI Express B",
+	"PCI Express A1",
+	"PCI Express A",
+	"DMA Controller",
+	"HUB or NS Interface",
+	"System Bus",
+	"DRAM Controller",  /* 9th entry */
+	"Internal Buffer"
 };
 
+#define DRAM_ENTRY	9
+
 static char *fatal_message[2] = { "Non-Fatal ", "Fatal " };
 
 static void do_global_error(int fatal, u32 errors)
@@ -435,9 +448,16 @@ static void do_global_error(int fatal, u32 errors)
 	int i;
 
 	for (i = 0; i < 11; i++) {
-		if (errors & (1 << i))
-			e752x_printk(KERN_WARNING, "%sError %s\n",
-				fatal_message[fatal], global_message[i]);
+		if (errors & (1 << i)) {
+			/* If the error is from DRAM Controller OR
+			 * we are to report ALL errors, then
+			 * report the error
+			 */
+			if ((i == DRAM_ENTRY) || report_non_memory_errors)
+				e752x_printk(KERN_WARNING, "%sError %s\n",
+					fatal_message[fatal],
+					global_message[i]);
+		}
 	}
 }
 
@@ -1021,7 +1041,7 @@ static int e752x_get_devs(struct pci_dev *pdev, int dev_idx,
 	struct pci_dev *dev;
 
 	pvt->bridge_ck = pci_get_device(PCI_VENDOR_ID_INTEL,
-					pvt->dev_info->err_dev, pvt->bridge_ck);
+				pvt->dev_info->err_dev, pvt->bridge_ck);
 
 	if (pvt->bridge_ck == NULL)
 		pvt->bridge_ck = pci_scan_single_device(pdev->bus,
@@ -1034,8 +1054,9 @@ static int e752x_get_devs(struct pci_dev *pdev, int dev_idx,
 		return 1;
 	}
 
-	dev = pci_get_device(PCI_VENDOR_ID_INTEL, e752x_devs[dev_idx].ctl_dev,
-			NULL);
+	dev = pci_get_device(PCI_VENDOR_ID_INTEL,
+				e752x_devs[dev_idx].ctl_dev,
+				NULL);
 
 	if (dev == NULL)
 		goto fail;
@@ -1316,7 +1337,8 @@ MODULE_DESCRIPTION("MC support for Intel e752x/3100 memory controllers");
 
 module_param(force_function_unhide, int, 0444);
 MODULE_PARM_DESC(force_function_unhide, "if BIOS sets Dev0:Fun1 up as hidden:"
-		 " 1=force unhide and hope BIOS doesn't fight driver for Dev0:Fun1 access");
+		 " 1=force unhide and hope BIOS doesn't fight driver for "
+		"Dev0:Fun1 access");
 
 module_param(edac_op_state, int, 0444);
 MODULE_PARM_DESC(edac_op_state, "EDAC Error Reporting state: 0=Poll,1=NMI");
@@ -1324,3 +1346,6 @@ MODULE_PARM_DESC(edac_op_state, "EDAC Error Reporting state: 0=Poll,1=NMI");
 module_param(sysbus_parity, int, 0444);
 MODULE_PARM_DESC(sysbus_parity, "0=disable system bus parity checking,"
 		" 1=enable system bus parity checking, default=auto-detect");
+module_param(report_non_memory_errors, int, 0644);
+MODULE_PARM_DESC(report_non_memory_errors, "0=disable non-memory error "
+		"reporting, 1=enable non-memory error reporting");
diff --git a/drivers/edac/edac_core.h b/drivers/edac/edac_core.h
index b27b13c5eb5a..4b55ec607a88 100644
--- a/drivers/edac/edac_core.h
+++ b/drivers/edac/edac_core.h
@@ -34,7 +34,6 @@
 #include <linux/platform_device.h>
 #include <linux/sysdev.h>
 #include <linux/workqueue.h>
-#include <linux/version.h>
 
 #define EDAC_MC_LABEL_LEN	31
 #define EDAC_DEVICE_NAME_LEN	31
diff --git a/drivers/edac/edac_mc_sysfs.c b/drivers/edac/edac_mc_sysfs.c
index 021d18795145..ad218fe4942d 100644
--- a/drivers/edac/edac_mc_sysfs.c
+++ b/drivers/edac/edac_mc_sysfs.c
@@ -44,6 +44,25 @@ int edac_mc_get_poll_msec(void)
 	return edac_mc_poll_msec;
 }
 
+static int edac_set_poll_msec(const char *val, struct kernel_param *kp)
+{
+	long l;
+	int ret;
+
+	if (!val)
+		return -EINVAL;
+
+	ret = strict_strtol(val, 0, &l);
+	if (ret == -EINVAL || ((int)l != l))
+		return -EINVAL;
+	*((int *)kp->arg) = l;
+
+	/* notify edac_mc engine to reset the poll period */
+	edac_mc_reset_delay_period(l);
+
+	return 0;
+}
+
 /* Parameter declarations for above */
 module_param(edac_mc_panic_on_ue, int, 0644);
 MODULE_PARM_DESC(edac_mc_panic_on_ue, "Panic on uncorrected error: 0=off 1=on");
@@ -53,7 +72,8 @@ MODULE_PARM_DESC(edac_mc_log_ue,
 module_param(edac_mc_log_ce, int, 0644);
 MODULE_PARM_DESC(edac_mc_log_ce,
 		 "Log correctable error to console: 0=off 1=on");
-module_param(edac_mc_poll_msec, int, 0644);
+module_param_call(edac_mc_poll_msec, edac_set_poll_msec, param_get_int,
+		  &edac_mc_poll_msec, 0644);
 MODULE_PARM_DESC(edac_mc_poll_msec, "Polling period in milliseconds");
 
 /*
@@ -103,16 +123,6 @@ static const char *edac_caps[] = {
 
 
 
-/*
- * /sys/devices/system/edac/mc;
- *	data structures and methods
- */
-static ssize_t memctrl_int_show(void *ptr, char *buffer)
-{
-	int *value = (int *)ptr;
-	return sprintf(buffer, "%u\n", *value);
-}
-
 static ssize_t memctrl_int_store(void *ptr, const char *buffer, size_t count)
 {
 	int *value = (int *)ptr;
@@ -123,23 +133,6 @@ static ssize_t memctrl_int_store(void *ptr, const char *buffer, size_t count)
 	return count;
 }
 
-/*
- * mc poll_msec time value
- */
-static ssize_t poll_msec_int_store(void *ptr, const char *buffer, size_t count)
-{
-	int *value = (int *)ptr;
-
-	if (isdigit(*buffer)) {
-		*value = simple_strtoul(buffer, NULL, 0);
-
-		/* notify edac_mc engine to reset the poll period */
-		edac_mc_reset_delay_period(*value);
-	}
-
-	return count;
-}
-
 
 /* EDAC sysfs CSROW data structures and methods
  */
@@ -185,7 +178,11 @@ static ssize_t csrow_edac_mode_show(struct csrow_info *csrow, char *data,
 static ssize_t channel_dimm_label_show(struct csrow_info *csrow,
 				char *data, int channel)
 {
-	return snprintf(data, EDAC_MC_LABEL_LEN, "%s",
+	/* if field has not been initialized, there is nothing to send */
+	if (!csrow->channels[channel].label[0])
+		return 0;
+
+	return snprintf(data, EDAC_MC_LABEL_LEN, "%s\n",
 			csrow->channels[channel].label);
 }
 
@@ -649,98 +646,10 @@ static struct kobj_type ktype_mci = {
 	.default_attrs = (struct attribute **)mci_attr,
 };
 
-/* show/store, tables, etc for the MC kset */
-
-
-struct memctrl_dev_attribute {
-	struct attribute attr;
-	void *value;
-	 ssize_t(*show) (void *, char *);
-	 ssize_t(*store) (void *, const char *, size_t);
-};
-
-/* Set of show/store abstract level functions for memory control object */
-static ssize_t memctrl_dev_show(struct kobject *kobj,
-				struct attribute *attr, char *buffer)
-{
-	struct memctrl_dev_attribute *memctrl_dev;
-	memctrl_dev = (struct memctrl_dev_attribute *)attr;
-
-	if (memctrl_dev->show)
-		return memctrl_dev->show(memctrl_dev->value, buffer);
-
-	return -EIO;
-}
-
-static ssize_t memctrl_dev_store(struct kobject *kobj, struct attribute *attr,
-				 const char *buffer, size_t count)
-{
-	struct memctrl_dev_attribute *memctrl_dev;
-	memctrl_dev = (struct memctrl_dev_attribute *)attr;
-
-	if (memctrl_dev->store)
-		return memctrl_dev->store(memctrl_dev->value, buffer, count);
-
-	return -EIO;
-}
-
-static struct sysfs_ops memctrlfs_ops = {
-	.show = memctrl_dev_show,
-	.store = memctrl_dev_store
-};
-
-#define MEMCTRL_ATTR(_name, _mode, _show, _store)			\
-static struct memctrl_dev_attribute attr_##_name = {			\
-	.attr = {.name = __stringify(_name), .mode = _mode },	\
-	.value  = &_name,					\
-	.show   = _show,					\
-	.store  = _store,					\
-};
-
-#define MEMCTRL_STRING_ATTR(_name, _data, _mode, _show, _store)	\
-static struct memctrl_dev_attribute attr_##_name = {			\
-	.attr = {.name = __stringify(_name), .mode = _mode },	\
-	.value  = _data,					\
-	.show   = _show,					\
-	.store  = _store,					\
-};
-
-/* csrow<id> control files */
-MEMCTRL_ATTR(edac_mc_panic_on_ue,
-	S_IRUGO | S_IWUSR, memctrl_int_show, memctrl_int_store);
-
-MEMCTRL_ATTR(edac_mc_log_ue,
-	S_IRUGO | S_IWUSR, memctrl_int_show, memctrl_int_store);
-
-MEMCTRL_ATTR(edac_mc_log_ce,
-	S_IRUGO | S_IWUSR, memctrl_int_show, memctrl_int_store);
-
-MEMCTRL_ATTR(edac_mc_poll_msec,
-	S_IRUGO | S_IWUSR, memctrl_int_show, poll_msec_int_store);
-
-/* Base Attributes of the memory ECC object */
-static struct memctrl_dev_attribute *memctrl_attr[] = {
-	&attr_edac_mc_panic_on_ue,
-	&attr_edac_mc_log_ue,
-	&attr_edac_mc_log_ce,
-	&attr_edac_mc_poll_msec,
-	NULL,
-};
-
-
-/* the ktype for the mc_kset internal kobj */
-static struct kobj_type ktype_mc_set_attribs = {
-	.sysfs_ops = &memctrlfs_ops,
-	.default_attrs = (struct attribute **)memctrl_attr,
-};
-
 /* EDAC memory controller sysfs kset:
  *	/sys/devices/system/edac/mc
  */
-static struct kset mc_kset = {
-	.kobj = {.ktype = &ktype_mc_set_attribs },
-};
-
+static struct kset *mc_kset;
 
 /*
  * edac_mc_register_sysfs_main_kobj
@@ -771,7 +680,7 @@ int edac_mc_register_sysfs_main_kobj(struct mem_ctl_info *mci)
 	}
 
 	/* this instance become part of the mc_kset */
-	kobj_mci->kset = &mc_kset;
+	kobj_mci->kset = mc_kset;
 
 	/* register the mc<id> kobject to the mc_kset */
 	err = kobject_init_and_add(kobj_mci, &ktype_mci, NULL,
@@ -1001,12 +910,9 @@ int edac_sysfs_setup_mc_kset(void)
 	}
 
 	/* Init the MC's kobject */
-	kobject_set_name(&mc_kset.kobj, "mc");
-	mc_kset.kobj.parent = &edac_class->kset.kobj;
-
-	/* register the mc_kset */
-	err = kset_register(&mc_kset);
-	if (err) {
+	mc_kset = kset_create_and_add("mc", NULL, &edac_class->kset.kobj);
+	if (!mc_kset) {
+		err = -ENOMEM;
 		debugf1("%s() Failed to register '.../edac/mc'\n", __func__);
 		goto fail_out;
 	}
@@ -1028,6 +934,6 @@ fail_out:
  */
 void edac_sysfs_teardown_mc_kset(void)
 {
-	kset_unregister(&mc_kset);
+	kset_unregister(mc_kset);
 }
 
diff --git a/drivers/edac/edac_pci_sysfs.c b/drivers/edac/edac_pci_sysfs.c
index 2c1fa1bb6df2..5c153dccc95e 100644
--- a/drivers/edac/edac_pci_sysfs.c
+++ b/drivers/edac/edac_pci_sysfs.c
@@ -28,7 +28,7 @@ static int edac_pci_poll_msec = 1000;	/* one second workq period */
 static atomic_t pci_parity_count = ATOMIC_INIT(0);
 static atomic_t pci_nonparity_count = ATOMIC_INIT(0);
 
-static struct kobject edac_pci_top_main_kobj;
+static struct kobject *edac_pci_top_main_kobj;
 static atomic_t edac_pci_sysfs_refcount = ATOMIC_INIT(0);
 
 /* getter functions for the data variables */
@@ -83,7 +83,7 @@ static void edac_pci_instance_release(struct kobject *kobj)
 	pci = to_instance(kobj);
 
 	/* decrement reference count on top main kobj */
-	kobject_put(&edac_pci_top_main_kobj);
+	kobject_put(edac_pci_top_main_kobj);
 
 	kfree(pci);	/* Free the control struct */
 }
@@ -166,7 +166,7 @@ static int edac_pci_create_instance_kobj(struct edac_pci_ctl_info *pci, int idx)
 	 * track the number of PCI instances we have, and thus nest
 	 * properly on keeping the module loaded
 	 */
-	main_kobj = kobject_get(&edac_pci_top_main_kobj);
+	main_kobj = kobject_get(edac_pci_top_main_kobj);
 	if (!main_kobj) {
 		err = -ENODEV;
 		goto error_out;
@@ -174,11 +174,11 @@ static int edac_pci_create_instance_kobj(struct edac_pci_ctl_info *pci, int idx)
 
 	/* And now register this new kobject under the main kobj */
 	err = kobject_init_and_add(&pci->kobj, &ktype_pci_instance,
-				   &edac_pci_top_main_kobj, "pci%d", idx);
+				   edac_pci_top_main_kobj, "pci%d", idx);
 	if (err != 0) {
 		debugf2("%s() failed to register instance pci%d\n",
 			__func__, idx);
-		kobject_put(&edac_pci_top_main_kobj);
+		kobject_put(edac_pci_top_main_kobj);
 		goto error_out;
 	}
 
@@ -316,9 +316,10 @@ static struct edac_pci_dev_attribute *edac_pci_attr[] = {
  */
 static void edac_pci_release_main_kobj(struct kobject *kobj)
 {
-
 	debugf0("%s() here to module_put(THIS_MODULE)\n", __func__);
 
+	kfree(kobj);
+
 	/* last reference to top EDAC PCI kobject has been removed,
 	 * NOW release our ref count on the core module
 	 */
@@ -369,8 +370,16 @@ static int edac_pci_main_kobj_setup(void)
 		goto decrement_count_fail;
 	}
 
+	edac_pci_top_main_kobj = kzalloc(sizeof(struct kobject), GFP_KERNEL);
+	if (!edac_pci_top_main_kobj) {
+		debugf1("Failed to allocate\n");
+		err = -ENOMEM;
+		goto kzalloc_fail;
+	}
+
 	/* Instanstiate the pci object */
-	err = kobject_init_and_add(&edac_pci_top_main_kobj, &ktype_edac_pci_main_kobj,
+	err = kobject_init_and_add(edac_pci_top_main_kobj,
+				   &ktype_edac_pci_main_kobj,
 				   &edac_class->kset.kobj, "pci");
 	if (err) {
 		debugf1("Failed to register '.../edac/pci'\n");
@@ -381,13 +390,16 @@ static int edac_pci_main_kobj_setup(void)
 	 * for EDAC PCI, then edac_pci_main_kobj_teardown()
 	 * must be used, for resources to be cleaned up properly
 	 */
-	kobject_uevent(&edac_pci_top_main_kobj, KOBJ_ADD);
+	kobject_uevent(edac_pci_top_main_kobj, KOBJ_ADD);
 	debugf1("Registered '.../edac/pci' kobject\n");
 
 	return 0;
 
 	/* Error unwind statck */
 kobject_init_and_add_fail:
+	kfree(edac_pci_top_main_kobj);
+
+kzalloc_fail:
 	module_put(THIS_MODULE);
 
 decrement_count_fail:
@@ -414,7 +426,7 @@ static void edac_pci_main_kobj_teardown(void)
 	if (atomic_dec_return(&edac_pci_sysfs_refcount) == 0) {
 		debugf0("%s() called kobject_put on main kobj\n",
 			__func__);
-		kobject_put(&edac_pci_top_main_kobj);
+		kobject_put(edac_pci_top_main_kobj);
 	}
 }
 
diff --git a/drivers/edac/i5100_edac.c b/drivers/edac/i5100_edac.c
new file mode 100644
index 000000000000..22db05a67bfb
--- /dev/null
+++ b/drivers/edac/i5100_edac.c
@@ -0,0 +1,981 @@
+/*
+ * Intel 5100 Memory Controllers kernel module
+ *
+ * This file may be distributed under the terms of the
+ * GNU General Public License.
+ *
+ * This module is based on the following document:
+ *
+ * Intel 5100X Chipset Memory Controller Hub (MCH) - Datasheet
+ *      http://download.intel.com/design/chipsets/datashts/318378.pdf
+ *
+ */
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/pci.h>
+#include <linux/pci_ids.h>
+#include <linux/slab.h>
+#include <linux/edac.h>
+#include <linux/delay.h>
+#include <linux/mmzone.h>
+
+#include "edac_core.h"
+
+/* register addresses */
+
+/* device 16, func 1 */
+#define I5100_MC		0x40	/* Memory Control Register */
+#define I5100_MS		0x44	/* Memory Status Register */
+#define I5100_SPDDATA		0x48	/* Serial Presence Detect Status Reg */
+#define I5100_SPDCMD		0x4c	/* Serial Presence Detect Command Reg */
+#define I5100_TOLM		0x6c	/* Top of Low Memory */
+#define I5100_MIR0		0x80	/* Memory Interleave Range 0 */
+#define I5100_MIR1		0x84	/* Memory Interleave Range 1 */
+#define I5100_AMIR_0		0x8c	/* Adjusted Memory Interleave Range 0 */
+#define I5100_AMIR_1		0x90	/* Adjusted Memory Interleave Range 1 */
+#define I5100_FERR_NF_MEM	0xa0	/* MC First Non Fatal Errors */
+#define		I5100_FERR_NF_MEM_M16ERR_MASK	(1 << 16)
+#define		I5100_FERR_NF_MEM_M15ERR_MASK	(1 << 15)
+#define		I5100_FERR_NF_MEM_M14ERR_MASK	(1 << 14)
+#define		I5100_FERR_NF_MEM_M12ERR_MASK	(1 << 12)
+#define		I5100_FERR_NF_MEM_M11ERR_MASK	(1 << 11)
+#define		I5100_FERR_NF_MEM_M10ERR_MASK	(1 << 10)
+#define		I5100_FERR_NF_MEM_M6ERR_MASK	(1 << 6)
+#define		I5100_FERR_NF_MEM_M5ERR_MASK	(1 << 5)
+#define		I5100_FERR_NF_MEM_M4ERR_MASK	(1 << 4)
+#define		I5100_FERR_NF_MEM_M1ERR_MASK	1
+#define		I5100_FERR_NF_MEM_ANY_MASK	\
+			(I5100_FERR_NF_MEM_M16ERR_MASK | \
+			I5100_FERR_NF_MEM_M15ERR_MASK | \
+			I5100_FERR_NF_MEM_M14ERR_MASK | \
+			I5100_FERR_NF_MEM_M12ERR_MASK | \
+			I5100_FERR_NF_MEM_M11ERR_MASK | \
+			I5100_FERR_NF_MEM_M10ERR_MASK | \
+			I5100_FERR_NF_MEM_M6ERR_MASK | \
+			I5100_FERR_NF_MEM_M5ERR_MASK | \
+			I5100_FERR_NF_MEM_M4ERR_MASK | \
+			I5100_FERR_NF_MEM_M1ERR_MASK)
+#define	I5100_NERR_NF_MEM	0xa4	/* MC Next Non-Fatal Errors */
+#define I5100_EMASK_MEM		0xa8	/* MC Error Mask Register */
+
+/* device 21 and 22, func 0 */
+#define I5100_MTR_0	0x154	/* Memory Technology Registers 0-3 */
+#define I5100_DMIR	0x15c	/* DIMM Interleave Range */
+#define	I5100_VALIDLOG	0x18c	/* Valid Log Markers */
+#define	I5100_NRECMEMA	0x190	/* Non-Recoverable Memory Error Log Reg A */
+#define	I5100_NRECMEMB	0x194	/* Non-Recoverable Memory Error Log Reg B */
+#define	I5100_REDMEMA	0x198	/* Recoverable Memory Data Error Log Reg A */
+#define	I5100_REDMEMB	0x19c	/* Recoverable Memory Data Error Log Reg B */
+#define	I5100_RECMEMA	0x1a0	/* Recoverable Memory Error Log Reg A */
+#define	I5100_RECMEMB	0x1a4	/* Recoverable Memory Error Log Reg B */
+#define I5100_MTR_4	0x1b0	/* Memory Technology Registers 4,5 */
+
+/* bit field accessors */
+
+static inline u32 i5100_mc_errdeten(u32 mc)
+{
+	return mc >> 5 & 1;
+}
+
+static inline u16 i5100_spddata_rdo(u16 a)
+{
+	return a >> 15 & 1;
+}
+
+static inline u16 i5100_spddata_sbe(u16 a)
+{
+	return a >> 13 & 1;
+}
+
+static inline u16 i5100_spddata_busy(u16 a)
+{
+	return a >> 12 & 1;
+}
+
+static inline u16 i5100_spddata_data(u16 a)
+{
+	return a & ((1 << 8) - 1);
+}
+
+static inline u32 i5100_spdcmd_create(u32 dti, u32 ckovrd, u32 sa, u32 ba,
+				      u32 data, u32 cmd)
+{
+	return	((dti & ((1 << 4) - 1))  << 28) |
+		((ckovrd & 1)            << 27) |
+		((sa & ((1 << 3) - 1))   << 24) |
+		((ba & ((1 << 8) - 1))   << 16) |
+		((data & ((1 << 8) - 1)) <<  8) |
+		(cmd & 1);
+}
+
+static inline u16 i5100_tolm_tolm(u16 a)
+{
+	return a >> 12 & ((1 << 4) - 1);
+}
+
+static inline u16 i5100_mir_limit(u16 a)
+{
+	return a >> 4 & ((1 << 12) - 1);
+}
+
+static inline u16 i5100_mir_way1(u16 a)
+{
+	return a >> 1 & 1;
+}
+
+static inline u16 i5100_mir_way0(u16 a)
+{
+	return a & 1;
+}
+
+static inline u32 i5100_ferr_nf_mem_chan_indx(u32 a)
+{
+	return a >> 28 & 1;
+}
+
+static inline u32 i5100_ferr_nf_mem_any(u32 a)
+{
+	return a & I5100_FERR_NF_MEM_ANY_MASK;
+}
+
+static inline u32 i5100_nerr_nf_mem_any(u32 a)
+{
+	return i5100_ferr_nf_mem_any(a);
+}
+
+static inline u32 i5100_dmir_limit(u32 a)
+{
+	return a >> 16 & ((1 << 11) - 1);
+}
+
+static inline u32 i5100_dmir_rank(u32 a, u32 i)
+{
+	return a >> (4 * i) & ((1 << 2) - 1);
+}
+
+static inline u16 i5100_mtr_present(u16 a)
+{
+	return a >> 10 & 1;
+}
+
+static inline u16 i5100_mtr_ethrottle(u16 a)
+{
+	return a >> 9 & 1;
+}
+
+static inline u16 i5100_mtr_width(u16 a)
+{
+	return a >> 8 & 1;
+}
+
+static inline u16 i5100_mtr_numbank(u16 a)
+{
+	return a >> 6 & 1;
+}
+
+static inline u16 i5100_mtr_numrow(u16 a)
+{
+	return a >> 2 & ((1 << 2) - 1);
+}
+
+static inline u16 i5100_mtr_numcol(u16 a)
+{
+	return a & ((1 << 2) - 1);
+}
+
+
+static inline u32 i5100_validlog_redmemvalid(u32 a)
+{
+	return a >> 2 & 1;
+}
+
+static inline u32 i5100_validlog_recmemvalid(u32 a)
+{
+	return a >> 1 & 1;
+}
+
+static inline u32 i5100_validlog_nrecmemvalid(u32 a)
+{
+	return a & 1;
+}
+
+static inline u32 i5100_nrecmema_merr(u32 a)
+{
+	return a >> 15 & ((1 << 5) - 1);
+}
+
+static inline u32 i5100_nrecmema_bank(u32 a)
+{
+	return a >> 12 & ((1 << 3) - 1);
+}
+
+static inline u32 i5100_nrecmema_rank(u32 a)
+{
+	return a >>  8 & ((1 << 3) - 1);
+}
+
+static inline u32 i5100_nrecmema_dm_buf_id(u32 a)
+{
+	return a & ((1 << 8) - 1);
+}
+
+static inline u32 i5100_nrecmemb_cas(u32 a)
+{
+	return a >> 16 & ((1 << 13) - 1);
+}
+
+static inline u32 i5100_nrecmemb_ras(u32 a)
+{
+	return a & ((1 << 16) - 1);
+}
+
+static inline u32 i5100_redmemb_ecc_locator(u32 a)
+{
+	return a & ((1 << 18) - 1);
+}
+
+static inline u32 i5100_recmema_merr(u32 a)
+{
+	return i5100_nrecmema_merr(a);
+}
+
+static inline u32 i5100_recmema_bank(u32 a)
+{
+	return i5100_nrecmema_bank(a);
+}
+
+static inline u32 i5100_recmema_rank(u32 a)
+{
+	return i5100_nrecmema_rank(a);
+}
+
+static inline u32 i5100_recmema_dm_buf_id(u32 a)
+{
+	return i5100_nrecmema_dm_buf_id(a);
+}
+
+static inline u32 i5100_recmemb_cas(u32 a)
+{
+	return i5100_nrecmemb_cas(a);
+}
+
+static inline u32 i5100_recmemb_ras(u32 a)
+{
+	return i5100_nrecmemb_ras(a);
+}
+
+/* some generic limits */
+#define I5100_MAX_RANKS_PER_CTLR	6
+#define I5100_MAX_CTLRS			2
+#define I5100_MAX_RANKS_PER_DIMM	4
+#define I5100_DIMM_ADDR_LINES		(6 - 3)	/* 64 bits / 8 bits per byte */
+#define I5100_MAX_DIMM_SLOTS_PER_CTLR	4
+#define I5100_MAX_RANK_INTERLEAVE	4
+#define I5100_MAX_DMIRS			5
+
+struct i5100_priv {
+	/* ranks on each dimm -- 0 maps to not present -- obtained via SPD */
+	int dimm_numrank[I5100_MAX_CTLRS][I5100_MAX_DIMM_SLOTS_PER_CTLR];
+
+	/*
+	 * mainboard chip select map -- maps i5100 chip selects to
+	 * DIMM slot chip selects.  In the case of only 4 ranks per
+	 * controller, the mapping is fairly obvious but not unique.
+	 * we map -1 -> NC and assume both controllers use the same
+	 * map...
+	 *
+	 */
+	int dimm_csmap[I5100_MAX_DIMM_SLOTS_PER_CTLR][I5100_MAX_RANKS_PER_DIMM];
+
+	/* memory interleave range */
+	struct {
+		u64	 limit;
+		unsigned way[2];
+	} mir[I5100_MAX_CTLRS];
+
+	/* adjusted memory interleave range register */
+	unsigned amir[I5100_MAX_CTLRS];
+
+	/* dimm interleave range */
+	struct {
+		unsigned rank[I5100_MAX_RANK_INTERLEAVE];
+		u64	 limit;
+	} dmir[I5100_MAX_CTLRS][I5100_MAX_DMIRS];
+
+	/* memory technology registers... */
+	struct {
+		unsigned present;	/* 0 or 1 */
+		unsigned ethrottle;	/* 0 or 1 */
+		unsigned width;		/* 4 or 8 bits  */
+		unsigned numbank;	/* 2 or 3 lines */
+		unsigned numrow;	/* 13 .. 16 lines */
+		unsigned numcol;	/* 11 .. 12 lines */
+	} mtr[I5100_MAX_CTLRS][I5100_MAX_RANKS_PER_CTLR];
+
+	u64 tolm;		/* top of low memory in bytes */
+	unsigned ranksperctlr;	/* number of ranks per controller */
+
+	struct pci_dev *mc;	/* device 16 func 1 */
+	struct pci_dev *ch0mm;	/* device 21 func 0 */
+	struct pci_dev *ch1mm;	/* device 22 func 0 */
+};
+
+/* map a rank/ctlr to a slot number on the mainboard */
+static int i5100_rank_to_slot(const struct mem_ctl_info *mci,
+			      int ctlr, int rank)
+{
+	const struct i5100_priv *priv = mci->pvt_info;
+	int i;
+
+	for (i = 0; i < I5100_MAX_DIMM_SLOTS_PER_CTLR; i++) {
+		int j;
+		const int numrank = priv->dimm_numrank[ctlr][i];
+
+		for (j = 0; j < numrank; j++)
+			if (priv->dimm_csmap[i][j] == rank)
+				return i * 2 + ctlr;
+	}
+
+	return -1;
+}
+
+static const char *i5100_err_msg(unsigned err)
+{
+	static const char *merrs[] = {
+		"unknown", /* 0 */
+		"uncorrectable data ECC on replay", /* 1 */
+		"unknown", /* 2 */
+		"unknown", /* 3 */
+		"aliased uncorrectable demand data ECC", /* 4 */
+		"aliased uncorrectable spare-copy data ECC", /* 5 */
+		"aliased uncorrectable patrol data ECC", /* 6 */
+		"unknown", /* 7 */
+		"unknown", /* 8 */
+		"unknown", /* 9 */
+		"non-aliased uncorrectable demand data ECC", /* 10 */
+		"non-aliased uncorrectable spare-copy data ECC", /* 11 */
+		"non-aliased uncorrectable patrol data ECC", /* 12 */
+		"unknown", /* 13 */
+		"correctable demand data ECC", /* 14 */
+		"correctable spare-copy data ECC", /* 15 */
+		"correctable patrol data ECC", /* 16 */
+		"unknown", /* 17 */
+		"SPD protocol error", /* 18 */
+		"unknown", /* 19 */
+		"spare copy initiated", /* 20 */
+		"spare copy completed", /* 21 */
+	};
+	unsigned i;
+
+	for (i = 0; i < ARRAY_SIZE(merrs); i++)
+		if (1 << i & err)
+			return merrs[i];
+
+	return "none";
+}
+
+/* convert csrow index into a rank (per controller -- 0..5) */
+static int i5100_csrow_to_rank(const struct mem_ctl_info *mci, int csrow)
+{
+	const struct i5100_priv *priv = mci->pvt_info;
+
+	return csrow % priv->ranksperctlr;
+}
+
+/* convert csrow index into a controller (0..1) */
+static int i5100_csrow_to_cntlr(const struct mem_ctl_info *mci, int csrow)
+{
+	const struct i5100_priv *priv = mci->pvt_info;
+
+	return csrow / priv->ranksperctlr;
+}
+
+static unsigned i5100_rank_to_csrow(const struct mem_ctl_info *mci,
+				    int ctlr, int rank)
+{
+	const struct i5100_priv *priv = mci->pvt_info;
+
+	return ctlr * priv->ranksperctlr + rank;
+}
+
+static void i5100_handle_ce(struct mem_ctl_info *mci,
+			    int ctlr,
+			    unsigned bank,
+			    unsigned rank,
+			    unsigned long syndrome,
+			    unsigned cas,
+			    unsigned ras,
+			    const char *msg)
+{
+	const int csrow = i5100_rank_to_csrow(mci, ctlr, rank);
+
+	printk(KERN_ERR
+		"CE ctlr %d, bank %u, rank %u, syndrome 0x%lx, "
+		"cas %u, ras %u, csrow %u, label \"%s\": %s\n",
+		ctlr, bank, rank, syndrome, cas, ras,
+		csrow, mci->csrows[csrow].channels[0].label, msg);
+
+	mci->ce_count++;
+	mci->csrows[csrow].ce_count++;
+	mci->csrows[csrow].channels[0].ce_count++;
+}
+
+static void i5100_handle_ue(struct mem_ctl_info *mci,
+			    int ctlr,
+			    unsigned bank,
+			    unsigned rank,
+			    unsigned long syndrome,
+			    unsigned cas,
+			    unsigned ras,
+			    const char *msg)
+{
+	const int csrow = i5100_rank_to_csrow(mci, ctlr, rank);
+
+	printk(KERN_ERR
+		"UE ctlr %d, bank %u, rank %u, syndrome 0x%lx, "
+		"cas %u, ras %u, csrow %u, label \"%s\": %s\n",
+		ctlr, bank, rank, syndrome, cas, ras,
+		csrow, mci->csrows[csrow].channels[0].label, msg);
+
+	mci->ue_count++;
+	mci->csrows[csrow].ue_count++;
+}
+
+static void i5100_read_log(struct mem_ctl_info *mci, int ctlr,
+			   u32 ferr, u32 nerr)
+{
+	struct i5100_priv *priv = mci->pvt_info;
+	struct pci_dev *pdev = (ctlr) ? priv->ch1mm : priv->ch0mm;
+	u32 dw;
+	u32 dw2;
+	unsigned syndrome = 0;
+	unsigned ecc_loc = 0;
+	unsigned merr;
+	unsigned bank;
+	unsigned rank;
+	unsigned cas;
+	unsigned ras;
+
+	pci_read_config_dword(pdev, I5100_VALIDLOG, &dw);
+
+	if (i5100_validlog_redmemvalid(dw)) {
+		pci_read_config_dword(pdev, I5100_REDMEMA, &dw2);
+		syndrome = dw2;
+		pci_read_config_dword(pdev, I5100_REDMEMB, &dw2);
+		ecc_loc = i5100_redmemb_ecc_locator(dw2);
+	}
+
+	if (i5100_validlog_recmemvalid(dw)) {
+		const char *msg;
+
+		pci_read_config_dword(pdev, I5100_RECMEMA, &dw2);
+		merr = i5100_recmema_merr(dw2);
+		bank = i5100_recmema_bank(dw2);
+		rank = i5100_recmema_rank(dw2);
+
+		pci_read_config_dword(pdev, I5100_RECMEMB, &dw2);
+		cas = i5100_recmemb_cas(dw2);
+		ras = i5100_recmemb_ras(dw2);
+
+		/* FIXME:  not really sure if this is what merr is...
+		 */
+		if (!merr)
+			msg = i5100_err_msg(ferr);
+		else
+			msg = i5100_err_msg(nerr);
+
+		i5100_handle_ce(mci, ctlr, bank, rank, syndrome, cas, ras, msg);
+	}
+
+	if (i5100_validlog_nrecmemvalid(dw)) {
+		const char *msg;
+
+		pci_read_config_dword(pdev, I5100_NRECMEMA, &dw2);
+		merr = i5100_nrecmema_merr(dw2);
+		bank = i5100_nrecmema_bank(dw2);
+		rank = i5100_nrecmema_rank(dw2);
+
+		pci_read_config_dword(pdev, I5100_NRECMEMB, &dw2);
+		cas = i5100_nrecmemb_cas(dw2);
+		ras = i5100_nrecmemb_ras(dw2);
+
+		/* FIXME:  not really sure if this is what merr is...
+		 */
+		if (!merr)
+			msg = i5100_err_msg(ferr);
+		else
+			msg = i5100_err_msg(nerr);
+
+		i5100_handle_ue(mci, ctlr, bank, rank, syndrome, cas, ras, msg);
+	}
+
+	pci_write_config_dword(pdev, I5100_VALIDLOG, dw);
+}
+
+static void i5100_check_error(struct mem_ctl_info *mci)
+{
+	struct i5100_priv *priv = mci->pvt_info;
+	u32 dw;
+
+
+	pci_read_config_dword(priv->mc, I5100_FERR_NF_MEM, &dw);
+	if (i5100_ferr_nf_mem_any(dw)) {
+		u32 dw2;
+
+		pci_read_config_dword(priv->mc, I5100_NERR_NF_MEM, &dw2);
+		if (dw2)
+			pci_write_config_dword(priv->mc, I5100_NERR_NF_MEM,
+					       dw2);
+		pci_write_config_dword(priv->mc, I5100_FERR_NF_MEM, dw);
+
+		i5100_read_log(mci, i5100_ferr_nf_mem_chan_indx(dw),
+			       i5100_ferr_nf_mem_any(dw),
+			       i5100_nerr_nf_mem_any(dw2));
+	}
+}
+
+static struct pci_dev *pci_get_device_func(unsigned vendor,
+					   unsigned device,
+					   unsigned func)
+{
+	struct pci_dev *ret = NULL;
+
+	while (1) {
+		ret = pci_get_device(vendor, device, ret);
+
+		if (!ret)
+			break;
+
+		if (PCI_FUNC(ret->devfn) == func)
+			break;
+	}
+
+	return ret;
+}
+
+static unsigned long __devinit i5100_npages(struct mem_ctl_info *mci,
+					    int csrow)
+{
+	struct i5100_priv *priv = mci->pvt_info;
+	const unsigned ctlr_rank = i5100_csrow_to_rank(mci, csrow);
+	const unsigned ctlr = i5100_csrow_to_cntlr(mci, csrow);
+	unsigned addr_lines;
+
+	/* dimm present? */
+	if (!priv->mtr[ctlr][ctlr_rank].present)
+		return 0ULL;
+
+	addr_lines =
+		I5100_DIMM_ADDR_LINES +
+		priv->mtr[ctlr][ctlr_rank].numcol +
+		priv->mtr[ctlr][ctlr_rank].numrow +
+		priv->mtr[ctlr][ctlr_rank].numbank;
+
+	return (unsigned long)
+		((unsigned long long) (1ULL << addr_lines) / PAGE_SIZE);
+}
+
+static void __devinit i5100_init_mtr(struct mem_ctl_info *mci)
+{
+	struct i5100_priv *priv = mci->pvt_info;
+	struct pci_dev *mms[2] = { priv->ch0mm, priv->ch1mm };
+	int i;
+
+	for (i = 0; i < I5100_MAX_CTLRS; i++) {
+		int j;
+		struct pci_dev *pdev = mms[i];
+
+		for (j = 0; j < I5100_MAX_RANKS_PER_CTLR; j++) {
+			const unsigned addr =
+				(j < 4) ? I5100_MTR_0 + j * 2 :
+					  I5100_MTR_4 + (j - 4) * 2;
+			u16 w;
+
+			pci_read_config_word(pdev, addr, &w);
+
+			priv->mtr[i][j].present = i5100_mtr_present(w);
+			priv->mtr[i][j].ethrottle = i5100_mtr_ethrottle(w);
+			priv->mtr[i][j].width = 4 + 4 * i5100_mtr_width(w);
+			priv->mtr[i][j].numbank = 2 + i5100_mtr_numbank(w);
+			priv->mtr[i][j].numrow = 13 + i5100_mtr_numrow(w);
+			priv->mtr[i][j].numcol = 10 + i5100_mtr_numcol(w);
+		}
+	}
+}
+
+/*
+ * FIXME: make this into a real i2c adapter (so that dimm-decode
+ * will work)?
+ */
+static int i5100_read_spd_byte(const struct mem_ctl_info *mci,
+			       u8 ch, u8 slot, u8 addr, u8 *byte)
+{
+	struct i5100_priv *priv = mci->pvt_info;
+	u16 w;
+	unsigned long et;
+
+	pci_read_config_word(priv->mc, I5100_SPDDATA, &w);
+	if (i5100_spddata_busy(w))
+		return -1;
+
+	pci_write_config_dword(priv->mc, I5100_SPDCMD,
+			       i5100_spdcmd_create(0xa, 1, ch * 4 + slot, addr,
+						   0, 0));
+
+	/* wait up to 100ms */
+	et = jiffies + HZ / 10;
+	udelay(100);
+	while (1) {
+		pci_read_config_word(priv->mc, I5100_SPDDATA, &w);
+		if (!i5100_spddata_busy(w))
+			break;
+		udelay(100);
+	}
+
+	if (!i5100_spddata_rdo(w) || i5100_spddata_sbe(w))
+		return -1;
+
+	*byte = i5100_spddata_data(w);
+
+	return 0;
+}
+
+/*
+ * fill dimm chip select map
+ *
+ * FIXME:
+ *   o only valid for 4 ranks per controller
+ *   o not the only way to may chip selects to dimm slots
+ *   o investigate if there is some way to obtain this map from the bios
+ */
+static void __devinit i5100_init_dimm_csmap(struct mem_ctl_info *mci)
+{
+	struct i5100_priv *priv = mci->pvt_info;
+	int i;
+
+	WARN_ON(priv->ranksperctlr != 4);
+
+	for (i = 0; i < I5100_MAX_DIMM_SLOTS_PER_CTLR; i++) {
+		int j;
+
+		for (j = 0; j < I5100_MAX_RANKS_PER_DIMM; j++)
+			priv->dimm_csmap[i][j] = -1; /* default NC */
+	}
+
+	/* only 2 chip selects per slot... */
+	priv->dimm_csmap[0][0] = 0;
+	priv->dimm_csmap[0][1] = 3;
+	priv->dimm_csmap[1][0] = 1;
+	priv->dimm_csmap[1][1] = 2;
+	priv->dimm_csmap[2][0] = 2;
+	priv->dimm_csmap[3][0] = 3;
+}
+
+static void __devinit i5100_init_dimm_layout(struct pci_dev *pdev,
+					     struct mem_ctl_info *mci)
+{
+	struct i5100_priv *priv = mci->pvt_info;
+	int i;
+
+	for (i = 0; i < I5100_MAX_CTLRS; i++) {
+		int j;
+
+		for (j = 0; j < I5100_MAX_DIMM_SLOTS_PER_CTLR; j++) {
+			u8 rank;
+
+			if (i5100_read_spd_byte(mci, i, j, 5, &rank) < 0)
+				priv->dimm_numrank[i][j] = 0;
+			else
+				priv->dimm_numrank[i][j] = (rank & 3) + 1;
+		}
+	}
+
+	i5100_init_dimm_csmap(mci);
+}
+
+static void __devinit i5100_init_interleaving(struct pci_dev *pdev,
+					      struct mem_ctl_info *mci)
+{
+	u16 w;
+	u32 dw;
+	struct i5100_priv *priv = mci->pvt_info;
+	struct pci_dev *mms[2] = { priv->ch0mm, priv->ch1mm };
+	int i;
+
+	pci_read_config_word(pdev, I5100_TOLM, &w);
+	priv->tolm = (u64) i5100_tolm_tolm(w) * 256 * 1024 * 1024;
+
+	pci_read_config_word(pdev, I5100_MIR0, &w);
+	priv->mir[0].limit = (u64) i5100_mir_limit(w) << 28;
+	priv->mir[0].way[1] = i5100_mir_way1(w);
+	priv->mir[0].way[0] = i5100_mir_way0(w);
+
+	pci_read_config_word(pdev, I5100_MIR1, &w);
+	priv->mir[1].limit = (u64) i5100_mir_limit(w) << 28;
+	priv->mir[1].way[1] = i5100_mir_way1(w);
+	priv->mir[1].way[0] = i5100_mir_way0(w);
+
+	pci_read_config_word(pdev, I5100_AMIR_0, &w);
+	priv->amir[0] = w;
+	pci_read_config_word(pdev, I5100_AMIR_1, &w);
+	priv->amir[1] = w;
+
+	for (i = 0; i < I5100_MAX_CTLRS; i++) {
+		int j;
+
+		for (j = 0; j < 5; j++) {
+			int k;
+
+			pci_read_config_dword(mms[i], I5100_DMIR + j * 4, &dw);
+
+			priv->dmir[i][j].limit =
+				(u64) i5100_dmir_limit(dw) << 28;
+			for (k = 0; k < I5100_MAX_RANKS_PER_DIMM; k++)
+				priv->dmir[i][j].rank[k] =
+					i5100_dmir_rank(dw, k);
+		}
+	}
+
+	i5100_init_mtr(mci);
+}
+
+static void __devinit i5100_init_csrows(struct mem_ctl_info *mci)
+{
+	int i;
+	unsigned long total_pages = 0UL;
+	struct i5100_priv *priv = mci->pvt_info;
+
+	for (i = 0; i < mci->nr_csrows; i++) {
+		const unsigned long npages = i5100_npages(mci, i);
+		const unsigned cntlr = i5100_csrow_to_cntlr(mci, i);
+		const unsigned rank = i5100_csrow_to_rank(mci, i);
+
+		if (!npages)
+			continue;
+
+		/*
+		 * FIXME: these two are totally bogus -- I don't see how to
+		 * map them correctly to this structure...
+		 */
+		mci->csrows[i].first_page = total_pages;
+		mci->csrows[i].last_page = total_pages + npages - 1;
+		mci->csrows[i].page_mask = 0UL;
+
+		mci->csrows[i].nr_pages = npages;
+		mci->csrows[i].grain = 32;
+		mci->csrows[i].csrow_idx = i;
+		mci->csrows[i].dtype =
+			(priv->mtr[cntlr][rank].width == 4) ? DEV_X4 : DEV_X8;
+		mci->csrows[i].ue_count = 0;
+		mci->csrows[i].ce_count = 0;
+		mci->csrows[i].mtype = MEM_RDDR2;
+		mci->csrows[i].edac_mode = EDAC_SECDED;
+		mci->csrows[i].mci = mci;
+		mci->csrows[i].nr_channels = 1;
+		mci->csrows[i].channels[0].chan_idx = 0;
+		mci->csrows[i].channels[0].ce_count = 0;
+		mci->csrows[i].channels[0].csrow = mci->csrows + i;
+		snprintf(mci->csrows[i].channels[0].label,
+			 sizeof(mci->csrows[i].channels[0].label),
+			 "DIMM%u", i5100_rank_to_slot(mci, cntlr, rank));
+
+		total_pages += npages;
+	}
+}
+
+static int __devinit i5100_init_one(struct pci_dev *pdev,
+				    const struct pci_device_id *id)
+{
+	int rc;
+	struct mem_ctl_info *mci;
+	struct i5100_priv *priv;
+	struct pci_dev *ch0mm, *ch1mm;
+	int ret = 0;
+	u32 dw;
+	int ranksperch;
+
+	if (PCI_FUNC(pdev->devfn) != 1)
+		return -ENODEV;
+
+	rc = pci_enable_device(pdev);
+	if (rc < 0) {
+		ret = rc;
+		goto bail;
+	}
+
+	/* ECC enabled? */
+	pci_read_config_dword(pdev, I5100_MC, &dw);
+	if (!i5100_mc_errdeten(dw)) {
+		printk(KERN_INFO "i5100_edac: ECC not enabled.\n");
+		ret = -ENODEV;
+		goto bail_pdev;
+	}
+
+	/* figure out how many ranks, from strapped state of 48GB_Mode input */
+	pci_read_config_dword(pdev, I5100_MS, &dw);
+	ranksperch = !!(dw & (1 << 8)) * 2 + 4;
+
+	if (ranksperch != 4) {
+		/* FIXME: get 6 ranks / controller to work - need hw... */
+		printk(KERN_INFO "i5100_edac: unsupported configuration.\n");
+		ret = -ENODEV;
+		goto bail_pdev;
+	}
+
+	/* enable error reporting... */
+	pci_read_config_dword(pdev, I5100_EMASK_MEM, &dw);
+	dw &= ~I5100_FERR_NF_MEM_ANY_MASK;
+	pci_write_config_dword(pdev, I5100_EMASK_MEM, dw);
+
+	/* device 21, func 0, Channel 0 Memory Map, Error Flag/Mask, etc... */
+	ch0mm = pci_get_device_func(PCI_VENDOR_ID_INTEL,
+				    PCI_DEVICE_ID_INTEL_5100_21, 0);
+	if (!ch0mm) {
+		ret = -ENODEV;
+		goto bail_pdev;
+	}
+
+	rc = pci_enable_device(ch0mm);
+	if (rc < 0) {
+		ret = rc;
+		goto bail_ch0;
+	}
+
+	/* device 22, func 0, Channel 1 Memory Map, Error Flag/Mask, etc... */
+	ch1mm = pci_get_device_func(PCI_VENDOR_ID_INTEL,
+				    PCI_DEVICE_ID_INTEL_5100_22, 0);
+	if (!ch1mm) {
+		ret = -ENODEV;
+		goto bail_disable_ch0;
+	}
+
+	rc = pci_enable_device(ch1mm);
+	if (rc < 0) {
+		ret = rc;
+		goto bail_ch1;
+	}
+
+	mci = edac_mc_alloc(sizeof(*priv), ranksperch * 2, 1, 0);
+	if (!mci) {
+		ret = -ENOMEM;
+		goto bail_disable_ch1;
+	}
+
+	mci->dev = &pdev->dev;
+
+	priv = mci->pvt_info;
+	priv->ranksperctlr = ranksperch;
+	priv->mc = pdev;
+	priv->ch0mm = ch0mm;
+	priv->ch1mm = ch1mm;
+
+	i5100_init_dimm_layout(pdev, mci);
+	i5100_init_interleaving(pdev, mci);
+
+	mci->mtype_cap = MEM_FLAG_FB_DDR2;
+	mci->edac_ctl_cap = EDAC_FLAG_SECDED;
+	mci->edac_cap = EDAC_FLAG_SECDED;
+	mci->mod_name = "i5100_edac.c";
+	mci->mod_ver = "not versioned";
+	mci->ctl_name = "i5100";
+	mci->dev_name = pci_name(pdev);
+	mci->ctl_page_to_phys = NULL;
+
+	mci->edac_check = i5100_check_error;
+
+	i5100_init_csrows(mci);
+
+	/* this strange construction seems to be in every driver, dunno why */
+	switch (edac_op_state) {
+	case EDAC_OPSTATE_POLL:
+	case EDAC_OPSTATE_NMI:
+		break;
+	default:
+		edac_op_state = EDAC_OPSTATE_POLL;
+		break;
+	}
+
+	if (edac_mc_add_mc(mci)) {
+		ret = -ENODEV;
+		goto bail_mc;
+	}
+
+	return ret;
+
+bail_mc:
+	edac_mc_free(mci);
+
+bail_disable_ch1:
+	pci_disable_device(ch1mm);
+
+bail_ch1:
+	pci_dev_put(ch1mm);
+
+bail_disable_ch0:
+	pci_disable_device(ch0mm);
+
+bail_ch0:
+	pci_dev_put(ch0mm);
+
+bail_pdev:
+	pci_disable_device(pdev);
+
+bail:
+	return ret;
+}
+
+static void __devexit i5100_remove_one(struct pci_dev *pdev)
+{
+	struct mem_ctl_info *mci;
+	struct i5100_priv *priv;
+
+	mci = edac_mc_del_mc(&pdev->dev);
+
+	if (!mci)
+		return;
+
+	priv = mci->pvt_info;
+	pci_disable_device(pdev);
+	pci_disable_device(priv->ch0mm);
+	pci_disable_device(priv->ch1mm);
+	pci_dev_put(priv->ch0mm);
+	pci_dev_put(priv->ch1mm);
+
+	edac_mc_free(mci);
+}
+
+static const struct pci_device_id i5100_pci_tbl[] __devinitdata = {
+	/* Device 16, Function 0, Channel 0 Memory Map, Error Flag/Mask, ... */
+	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_5100_16) },
+	{ 0, }
+};
+MODULE_DEVICE_TABLE(pci, i5100_pci_tbl);
+
+static struct pci_driver i5100_driver = {
+	.name = KBUILD_BASENAME,
+	.probe = i5100_init_one,
+	.remove = __devexit_p(i5100_remove_one),
+	.id_table = i5100_pci_tbl,
+};
+
+static int __init i5100_init(void)
+{
+	int pci_rc;
+
+	pci_rc = pci_register_driver(&i5100_driver);
+
+	return (pci_rc < 0) ? pci_rc : 0;
+}
+
+static void __exit i5100_exit(void)
+{
+	pci_unregister_driver(&i5100_driver);
+}
+
+module_init(i5100_init);
+module_exit(i5100_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR
+    ("Arthur Jones <ajones@riverbed.com>");
+MODULE_DESCRIPTION("MC Driver for Intel I5100 memory controllers");
diff --git a/drivers/edac/mpc85xx_edac.c b/drivers/edac/mpc85xx_edac.c
index d49361bfe670..2265d9ca1535 100644
--- a/drivers/edac/mpc85xx_edac.c
+++ b/drivers/edac/mpc85xx_edac.c
@@ -195,14 +195,15 @@ static irqreturn_t mpc85xx_pci_isr(int irq, void *dev_id)
 	return IRQ_HANDLED;
 }
 
-static int __devinit mpc85xx_pci_err_probe(struct platform_device *pdev)
+static int __devinit mpc85xx_pci_err_probe(struct of_device *op,
+					   const struct of_device_id *match)
 {
 	struct edac_pci_ctl_info *pci;
 	struct mpc85xx_pci_pdata *pdata;
-	struct resource *r;
+	struct resource r;
 	int res = 0;
 
-	if (!devres_open_group(&pdev->dev, mpc85xx_pci_err_probe, GFP_KERNEL))
+	if (!devres_open_group(&op->dev, mpc85xx_pci_err_probe, GFP_KERNEL))
 		return -ENOMEM;
 
 	pci = edac_pci_alloc_ctl_info(sizeof(*pdata), "mpc85xx_pci_err");
@@ -212,34 +213,37 @@ static int __devinit mpc85xx_pci_err_probe(struct platform_device *pdev)
 	pdata = pci->pvt_info;
 	pdata->name = "mpc85xx_pci_err";
 	pdata->irq = NO_IRQ;
-	platform_set_drvdata(pdev, pci);
-	pci->dev = &pdev->dev;
+	dev_set_drvdata(&op->dev, pci);
+	pci->dev = &op->dev;
 	pci->mod_name = EDAC_MOD_STR;
 	pci->ctl_name = pdata->name;
-	pci->dev_name = pdev->dev.bus_id;
+	pci->dev_name = op->dev.bus_id;
 
 	if (edac_op_state == EDAC_OPSTATE_POLL)
 		pci->edac_check = mpc85xx_pci_check;
 
 	pdata->edac_idx = edac_pci_idx++;
 
-	r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	if (!r) {
+	res = of_address_to_resource(op->node, 0, &r);
+	if (res) {
 		printk(KERN_ERR "%s: Unable to get resource for "
 		       "PCI err regs\n", __func__);
 		goto err;
 	}
 
-	if (!devm_request_mem_region(&pdev->dev, r->start,
-				     r->end - r->start + 1, pdata->name)) {
+	/* we only need the error registers */
+	r.start += 0xe00;
+
+	if (!devm_request_mem_region(&op->dev, r.start,
+					r.end - r.start + 1, pdata->name)) {
 		printk(KERN_ERR "%s: Error while requesting mem region\n",
 		       __func__);
 		res = -EBUSY;
 		goto err;
 	}
 
-	pdata->pci_vbase = devm_ioremap(&pdev->dev, r->start,
-					r->end - r->start + 1);
+	pdata->pci_vbase = devm_ioremap(&op->dev, r.start,
+					r.end - r.start + 1);
 	if (!pdata->pci_vbase) {
 		printk(KERN_ERR "%s: Unable to setup PCI err regs\n", __func__);
 		res = -ENOMEM;
@@ -266,14 +270,15 @@ static int __devinit mpc85xx_pci_err_probe(struct platform_device *pdev)
 	}
 
 	if (edac_op_state == EDAC_OPSTATE_INT) {
-		pdata->irq = platform_get_irq(pdev, 0);
-		res = devm_request_irq(&pdev->dev, pdata->irq,
+		pdata->irq = irq_of_parse_and_map(op->node, 0);
+		res = devm_request_irq(&op->dev, pdata->irq,
 				       mpc85xx_pci_isr, IRQF_DISABLED,
 				       "[EDAC] PCI err", pci);
 		if (res < 0) {
 			printk(KERN_ERR
 			       "%s: Unable to requiest irq %d for "
 			       "MPC85xx PCI err\n", __func__, pdata->irq);
+			irq_dispose_mapping(pdata->irq);
 			res = -ENODEV;
 			goto err2;
 		}
@@ -282,23 +287,23 @@ static int __devinit mpc85xx_pci_err_probe(struct platform_device *pdev)
 		       pdata->irq);
 	}
 
-	devres_remove_group(&pdev->dev, mpc85xx_pci_err_probe);
+	devres_remove_group(&op->dev, mpc85xx_pci_err_probe);
 	debugf3("%s(): success\n", __func__);
 	printk(KERN_INFO EDAC_MOD_STR " PCI err registered\n");
 
 	return 0;
 
 err2:
-	edac_pci_del_device(&pdev->dev);
+	edac_pci_del_device(&op->dev);
 err:
 	edac_pci_free_ctl_info(pci);
-	devres_release_group(&pdev->dev, mpc85xx_pci_err_probe);
+	devres_release_group(&op->dev, mpc85xx_pci_err_probe);
 	return res;
 }
 
-static int mpc85xx_pci_err_remove(struct platform_device *pdev)
+static int mpc85xx_pci_err_remove(struct of_device *op)
 {
-	struct edac_pci_ctl_info *pci = platform_get_drvdata(pdev);
+	struct edac_pci_ctl_info *pci = dev_get_drvdata(&op->dev);
 	struct mpc85xx_pci_pdata *pdata = pci->pvt_info;
 
 	debugf0("%s()\n", __func__);
@@ -318,12 +323,26 @@ static int mpc85xx_pci_err_remove(struct platform_device *pdev)
 	return 0;
 }
 
-static struct platform_driver mpc85xx_pci_err_driver = {
+static struct of_device_id mpc85xx_pci_err_of_match[] = {
+	{
+	 .compatible = "fsl,mpc8540-pcix",
+	 },
+	{
+	 .compatible = "fsl,mpc8540-pci",
+	},
+	{},
+};
+
+static struct of_platform_driver mpc85xx_pci_err_driver = {
+	.owner = THIS_MODULE,
+	.name = "mpc85xx_pci_err",
+	.match_table = mpc85xx_pci_err_of_match,
 	.probe = mpc85xx_pci_err_probe,
 	.remove = __devexit_p(mpc85xx_pci_err_remove),
 	.driver = {
-		.name = "mpc85xx_pci_err",
-	}
+		   .name = "mpc85xx_pci_err",
+		   .owner = THIS_MODULE,
+		   },
 };
 
 #endif				/* CONFIG_PCI */
@@ -1002,7 +1021,7 @@ static int __init mpc85xx_mc_init(void)
 		printk(KERN_WARNING EDAC_MOD_STR "L2 fails to register\n");
 
 #ifdef CONFIG_PCI
-	res = platform_driver_register(&mpc85xx_pci_err_driver);
+	res = of_register_platform_driver(&mpc85xx_pci_err_driver);
 	if (res)
 		printk(KERN_WARNING EDAC_MOD_STR "PCI fails to register\n");
 #endif
@@ -1025,7 +1044,7 @@ static void __exit mpc85xx_mc_exit(void)
 {
 	mtspr(SPRN_HID1, orig_hid1);
 #ifdef CONFIG_PCI
-	platform_driver_unregister(&mpc85xx_pci_err_driver);
+	of_unregister_platform_driver(&mpc85xx_pci_err_driver);
 #endif
 	of_unregister_platform_driver(&mpc85xx_l2_err_driver);
 	of_unregister_platform_driver(&mpc85xx_mc_err_driver);
diff --git a/drivers/edac/mv64x60_edac.c b/drivers/edac/mv64x60_edac.c
index bf071f140a05..083ce8d0c63d 100644
--- a/drivers/edac/mv64x60_edac.c
+++ b/drivers/edac/mv64x60_edac.c
@@ -71,6 +71,35 @@ static irqreturn_t mv64x60_pci_isr(int irq, void *dev_id)
 	return IRQ_HANDLED;
 }
 
+/*
+ * Bit 0 of MV64x60_PCIx_ERR_MASK does not exist on the 64360 and because of
+ * errata FEr-#11 and FEr-##16 for the 64460, it should be 0 on that chip as
+ * well.  IOW, don't set bit 0.
+ */
+
+/* Erratum FEr PCI-#16: clear bit 0 of PCI SERRn Mask reg. */
+static int __init mv64x60_pci_fixup(struct platform_device *pdev)
+{
+	struct resource *r;
+	void __iomem *pci_serr;
+
+	r = platform_get_resource(pdev, IORESOURCE_MEM, 1);
+	if (!r) {
+		printk(KERN_ERR "%s: Unable to get resource for "
+		       "PCI err regs\n", __func__);
+		return -ENOENT;
+	}
+
+	pci_serr = ioremap(r->start, r->end - r->start + 1);
+	if (!pci_serr)
+		return -ENOMEM;
+
+	out_le32(pci_serr, in_le32(pci_serr) & ~0x1);
+	iounmap(pci_serr);
+
+	return 0;
+}
+
 static int __devinit mv64x60_pci_err_probe(struct platform_device *pdev)
 {
 	struct edac_pci_ctl_info *pci;
@@ -128,6 +157,12 @@ static int __devinit mv64x60_pci_err_probe(struct platform_device *pdev)
 		goto err;
 	}
 
+	res = mv64x60_pci_fixup(pdev);
+	if (res < 0) {
+		printk(KERN_ERR "%s: PCI fixup failed\n", __func__);
+		goto err;
+	}
+
 	out_le32(pdata->pci_vbase + MV64X60_PCI_ERROR_CAUSE, 0);
 	out_le32(pdata->pci_vbase + MV64X60_PCI_ERROR_MASK, 0);
 	out_le32(pdata->pci_vbase + MV64X60_PCI_ERROR_MASK,
@@ -612,7 +647,7 @@ static void get_total_mem(struct mv64x60_mc_pdata *pdata)
 	if (!np)
 		return;
 
-	reg = get_property(np, "reg", NULL);
+	reg = of_get_property(np, "reg", NULL);
 
 	pdata->total_mem = reg[1];
 }
diff --git a/drivers/firewire/Kconfig b/drivers/firewire/Kconfig
index 76f26710fc16..450902438208 100644
--- a/drivers/firewire/Kconfig
+++ b/drivers/firewire/Kconfig
@@ -12,12 +12,17 @@ config FIREWIRE
 	  This is the "Juju" FireWire stack, a new alternative implementation
 	  designed for robustness and simplicity.  You can build either this
 	  stack, or the old stack (the ieee1394 driver, ohci1394 etc.) or both.
-	  Please read http://wiki.linux1394.org/JujuMigration before you
-	  enable the new stack.
+	  Please read http://ieee1394.wiki.kernel.org/index.php/Juju_Migration
+	  before you enable the new stack.
 
 	  To compile this driver as a module, say M here: the module will be
-	  called firewire-core.  It functionally replaces ieee1394, raw1394,
-	  and video1394.
+	  called firewire-core.
+
+	  This module functionally replaces ieee1394, raw1394, and video1394.
+	  To access it from application programs, you generally need at least
+	  libraw1394 version 2.  IIDC/DCAM applications also need libdc1394
+	  version 2.  No libraries are required to access storage devices
+	  through the firewire-sbp2 driver.
 
 config FIREWIRE_OHCI
 	tristate "OHCI-1394 controllers"
diff --git a/drivers/firewire/fw-card.c b/drivers/firewire/fw-card.c
index da873d795aad..bbd73a406e53 100644
--- a/drivers/firewire/fw-card.c
+++ b/drivers/firewire/fw-card.c
@@ -539,7 +539,7 @@ fw_core_remove_card(struct fw_card *card)
 	wait_for_completion(&card->done);
 
 	cancel_delayed_work_sync(&card->work);
-	fw_flush_transactions(card);
+	WARN_ON(!list_empty(&card->transaction_list));
 	del_timer_sync(&card->flush_timer);
 }
 EXPORT_SYMBOL(fw_core_remove_card);
diff --git a/drivers/firewire/fw-cdev.c b/drivers/firewire/fw-cdev.c
index c639915fc3cb..2e6d5848d217 100644
--- a/drivers/firewire/fw-cdev.c
+++ b/drivers/firewire/fw-cdev.c
@@ -369,22 +369,33 @@ complete_transaction(struct fw_card *card, int rcode,
 	struct response *response = data;
 	struct client *client = response->client;
 	unsigned long flags;
+	struct fw_cdev_event_response *r = &response->response;
 
-	if (length < response->response.length)
-		response->response.length = length;
+	if (length < r->length)
+		r->length = length;
 	if (rcode == RCODE_COMPLETE)
-		memcpy(response->response.data, payload,
-		       response->response.length);
+		memcpy(r->data, payload, r->length);
 
 	spin_lock_irqsave(&client->lock, flags);
 	list_del(&response->resource.link);
 	spin_unlock_irqrestore(&client->lock, flags);
 
-	response->response.type   = FW_CDEV_EVENT_RESPONSE;
-	response->response.rcode  = rcode;
-	queue_event(client, &response->event,
-		    &response->response, sizeof(response->response),
-		    response->response.data, response->response.length);
+	r->type   = FW_CDEV_EVENT_RESPONSE;
+	r->rcode  = rcode;
+
+	/*
+	 * In the case that sizeof(*r) doesn't align with the position of the
+	 * data, and the read is short, preserve an extra copy of the data
+	 * to stay compatible with a pre-2.6.27 bug.  Since the bug is harmless
+	 * for short reads and some apps depended on it, this is both safe
+	 * and prudent for compatibility.
+	 */
+	if (r->length <= sizeof(*r) - offsetof(typeof(*r), data))
+		queue_event(client, &response->event, r, sizeof(*r),
+			    r->data, r->length);
+	else
+		queue_event(client, &response->event, r, sizeof(*r) + r->length,
+			    NULL, 0);
 }
 
 static int ioctl_send_request(struct client *client, void *buffer)
diff --git a/drivers/firewire/fw-iso.c b/drivers/firewire/fw-iso.c
index bcbe794a3ea5..e14c03dc0065 100644
--- a/drivers/firewire/fw-iso.c
+++ b/drivers/firewire/fw-iso.c
@@ -50,7 +50,7 @@ fw_iso_buffer_init(struct fw_iso_buffer *buffer, struct fw_card *card,
 
 		address = dma_map_page(card->device, buffer->pages[i],
 				       0, PAGE_SIZE, direction);
-		if (dma_mapping_error(address)) {
+		if (dma_mapping_error(card->device, address)) {
 			__free_page(buffer->pages[i]);
 			goto out_pages;
 		}
diff --git a/drivers/firewire/fw-ohci.c b/drivers/firewire/fw-ohci.c
index 333b12544dd1..251416f2148f 100644
--- a/drivers/firewire/fw-ohci.c
+++ b/drivers/firewire/fw-ohci.c
@@ -171,7 +171,6 @@ struct iso_context {
 struct fw_ohci {
 	struct fw_card card;
 
-	u32 version;
 	__iomem char *registers;
 	dma_addr_t self_id_bus;
 	__le32 *self_id_cpu;
@@ -180,6 +179,8 @@ struct fw_ohci {
 	int generation;
 	int request_generation;	/* for timestamping incoming requests */
 	u32 bus_seconds;
+
+	bool use_dualbuffer;
 	bool old_uninorth;
 	bool bus_reset_packet_quirk;
 
@@ -953,7 +954,7 @@ at_context_queue_packet(struct context *ctx, struct fw_packet *packet)
 		payload_bus =
 			dma_map_single(ohci->card.device, packet->payload,
 				       packet->payload_length, DMA_TO_DEVICE);
-		if (dma_mapping_error(payload_bus)) {
+		if (dma_mapping_error(ohci->card.device, payload_bus)) {
 			packet->ack = RCODE_SEND_ERROR;
 			return -1;
 		}
@@ -1885,7 +1886,7 @@ ohci_allocate_iso_context(struct fw_card *card, int type, size_t header_size)
 	} else {
 		mask = &ohci->ir_context_mask;
 		list = ohci->ir_context_list;
-		if (ohci->version >= OHCI_VERSION_1_1)
+		if (ohci->use_dualbuffer)
 			callback = handle_ir_dualbuffer_packet;
 		else
 			callback = handle_ir_packet_per_buffer;
@@ -1949,7 +1950,7 @@ static int ohci_start_iso(struct fw_iso_context *base,
 	} else {
 		index = ctx - ohci->ir_context_list;
 		control = IR_CONTEXT_ISOCH_HEADER;
-		if (ohci->version >= OHCI_VERSION_1_1)
+		if (ohci->use_dualbuffer)
 			control |= IR_CONTEXT_DUAL_BUFFER_MODE;
 		match = (tags << 28) | (sync << 8) | ctx->base.channel;
 		if (cycle >= 0) {
@@ -2279,7 +2280,7 @@ ohci_queue_iso(struct fw_iso_context *base,
 	spin_lock_irqsave(&ctx->context.ohci->lock, flags);
 	if (base->type == FW_ISO_CONTEXT_TRANSMIT)
 		retval = ohci_queue_iso_transmit(base, packet, buffer, payload);
-	else if (ctx->context.ohci->version >= OHCI_VERSION_1_1)
+	else if (ctx->context.ohci->use_dualbuffer)
 		retval = ohci_queue_iso_receive_dualbuffer(base, packet,
 							 buffer, payload);
 	else
@@ -2341,7 +2342,7 @@ static int __devinit
 pci_probe(struct pci_dev *dev, const struct pci_device_id *ent)
 {
 	struct fw_ohci *ohci;
-	u32 bus_options, max_receive, link_speed;
+	u32 bus_options, max_receive, link_speed, version;
 	u64 guid;
 	int err;
 	size_t size;
@@ -2366,12 +2367,6 @@ pci_probe(struct pci_dev *dev, const struct pci_device_id *ent)
 	pci_write_config_dword(dev, OHCI1394_PCI_HCI_Control, 0);
 	pci_set_drvdata(dev, ohci);
 
-#if defined(CONFIG_PPC_PMAC) && defined(CONFIG_PPC32)
-	ohci->old_uninorth = dev->vendor == PCI_VENDOR_ID_APPLE &&
-			     dev->device == PCI_DEVICE_ID_APPLE_UNI_N_FW;
-#endif
-	ohci->bus_reset_packet_quirk = dev->vendor == PCI_VENDOR_ID_TI;
-
 	spin_lock_init(&ohci->lock);
 
 	tasklet_init(&ohci->bus_reset_tasklet,
@@ -2390,6 +2385,23 @@ pci_probe(struct pci_dev *dev, const struct pci_device_id *ent)
 		goto fail_iomem;
 	}
 
+	version = reg_read(ohci, OHCI1394_Version) & 0x00ff00ff;
+	ohci->use_dualbuffer = version >= OHCI_VERSION_1_1;
+
+/* x86-32 currently doesn't use highmem for dma_alloc_coherent */
+#if !defined(CONFIG_X86_32)
+	/* dual-buffer mode is broken with descriptor addresses above 2G */
+	if (dev->vendor == PCI_VENDOR_ID_TI &&
+	    dev->device == PCI_DEVICE_ID_TI_TSB43AB22)
+		ohci->use_dualbuffer = false;
+#endif
+
+#if defined(CONFIG_PPC_PMAC) && defined(CONFIG_PPC32)
+	ohci->old_uninorth = dev->vendor == PCI_VENDOR_ID_APPLE &&
+			     dev->device == PCI_DEVICE_ID_APPLE_UNI_N_FW;
+#endif
+	ohci->bus_reset_packet_quirk = dev->vendor == PCI_VENDOR_ID_TI;
+
 	ar_context_init(&ohci->ar_request_ctx, ohci,
 			OHCI1394_AsReqRcvContextControlSet);
 
@@ -2441,9 +2453,8 @@ pci_probe(struct pci_dev *dev, const struct pci_device_id *ent)
 	if (err < 0)
 		goto fail_self_id;
 
-	ohci->version = reg_read(ohci, OHCI1394_Version) & 0x00ff00ff;
 	fw_notify("Added fw-ohci device %s, OHCI version %x.%x\n",
-		  dev->dev.bus_id, ohci->version >> 16, ohci->version & 0xff);
+		  dev->dev.bus_id, version >> 16, version & 0xff);
 	return 0;
 
  fail_self_id:
diff --git a/drivers/firewire/fw-sbp2.c b/drivers/firewire/fw-sbp2.c
index 53fc5a641e6d..aaff50ebba1d 100644
--- a/drivers/firewire/fw-sbp2.c
+++ b/drivers/firewire/fw-sbp2.c
@@ -543,7 +543,7 @@ sbp2_send_management_orb(struct sbp2_logical_unit *lu, int node_id,
 	orb->response_bus =
 		dma_map_single(device->card->device, &orb->response,
 			       sizeof(orb->response), DMA_FROM_DEVICE);
-	if (dma_mapping_error(orb->response_bus))
+	if (dma_mapping_error(device->card->device, orb->response_bus))
 		goto fail_mapping_response;
 
 	orb->request.response.high = 0;
@@ -577,7 +577,7 @@ sbp2_send_management_orb(struct sbp2_logical_unit *lu, int node_id,
 	orb->base.request_bus =
 		dma_map_single(device->card->device, &orb->request,
 			       sizeof(orb->request), DMA_TO_DEVICE);
-	if (dma_mapping_error(orb->base.request_bus))
+	if (dma_mapping_error(device->card->device, orb->base.request_bus))
 		goto fail_mapping_request;
 
 	sbp2_send_orb(&orb->base, lu, node_id, generation,
@@ -1424,7 +1424,7 @@ sbp2_map_scatterlist(struct sbp2_command_orb *orb, struct fw_device *device,
 	orb->page_table_bus =
 		dma_map_single(device->card->device, orb->page_table,
 			       sizeof(orb->page_table), DMA_TO_DEVICE);
-	if (dma_mapping_error(orb->page_table_bus))
+	if (dma_mapping_error(device->card->device, orb->page_table_bus))
 		goto fail_page_table;
 
 	/*
@@ -1509,7 +1509,7 @@ static int sbp2_scsi_queuecommand(struct scsi_cmnd *cmd, scsi_done_fn_t done)
 	orb->base.request_bus =
 		dma_map_single(device->card->device, &orb->request,
 			       sizeof(orb->request), DMA_TO_DEVICE);
-	if (dma_mapping_error(orb->base.request_bus))
+	if (dma_mapping_error(device->card->device, orb->base.request_bus))
 		goto out;
 
 	sbp2_send_orb(&orb->base, lu, lu->tgt->node_id, lu->generation,
diff --git a/drivers/firewire/fw-topology.c b/drivers/firewire/fw-topology.c
index 213b0ff8f3d6..c1b81077c4a8 100644
--- a/drivers/firewire/fw-topology.c
+++ b/drivers/firewire/fw-topology.c
@@ -510,8 +510,6 @@ fw_core_handle_bus_reset(struct fw_card *card,
 	struct fw_node *local_node;
 	unsigned long flags;
 
-	fw_flush_transactions(card);
-
 	spin_lock_irqsave(&card->lock, flags);
 
 	/*
diff --git a/drivers/firewire/fw-transaction.c b/drivers/firewire/fw-transaction.c
index 40db80752272..e5d1a0b64fcf 100644
--- a/drivers/firewire/fw-transaction.c
+++ b/drivers/firewire/fw-transaction.c
@@ -22,6 +22,7 @@
 #include <linux/kernel.h>
 #include <linux/kref.h>
 #include <linux/module.h>
+#include <linux/mutex.h>
 #include <linux/init.h>
 #include <linux/interrupt.h>
 #include <linux/pci.h>
@@ -151,7 +152,7 @@ transmit_complete_callback(struct fw_packet *packet,
 
 static void
 fw_fill_request(struct fw_packet *packet, int tcode, int tlabel,
-		int node_id, int source_id, int generation, int speed,
+		int destination_id, int source_id, int generation, int speed,
 		unsigned long long offset, void *payload, size_t length)
 {
 	int ext_tcode;
@@ -166,7 +167,7 @@ fw_fill_request(struct fw_packet *packet, int tcode, int tlabel,
 		HEADER_RETRY(RETRY_X) |
 		HEADER_TLABEL(tlabel) |
 		HEADER_TCODE(tcode) |
-		HEADER_DESTINATION(node_id);
+		HEADER_DESTINATION(destination_id);
 	packet->header[1] =
 		HEADER_OFFSET_HIGH(offset >> 32) | HEADER_SOURCE(source_id);
 	packet->header[2] =
@@ -252,7 +253,7 @@ fw_send_request(struct fw_card *card, struct fw_transaction *t,
 		fw_transaction_callback_t callback, void *callback_data)
 {
 	unsigned long flags;
-	int tlabel, source;
+	int tlabel;
 
 	/*
 	 * Bump the flush timer up 100ms first of all so we
@@ -268,7 +269,6 @@ fw_send_request(struct fw_card *card, struct fw_transaction *t,
 
 	spin_lock_irqsave(&card->lock, flags);
 
-	source = card->node_id;
 	tlabel = card->current_tlabel;
 	if (card->tlabel_mask & (1 << tlabel)) {
 		spin_unlock_irqrestore(&card->lock, flags);
@@ -279,77 +279,58 @@ fw_send_request(struct fw_card *card, struct fw_transaction *t,
 	card->current_tlabel = (card->current_tlabel + 1) & 0x1f;
 	card->tlabel_mask |= (1 << tlabel);
 
-	list_add_tail(&t->link, &card->transaction_list);
-
-	spin_unlock_irqrestore(&card->lock, flags);
-
-	/* Initialize rest of transaction, fill out packet and send it. */
 	t->node_id = node_id;
 	t->tlabel = tlabel;
 	t->callback = callback;
 	t->callback_data = callback_data;
 
-	fw_fill_request(&t->packet, tcode, t->tlabel,
-			node_id, source, generation,
-			speed, offset, payload, length);
+	fw_fill_request(&t->packet, tcode, t->tlabel, node_id, card->node_id,
+			generation, speed, offset, payload, length);
 	t->packet.callback = transmit_complete_callback;
 
+	list_add_tail(&t->link, &card->transaction_list);
+
+	spin_unlock_irqrestore(&card->lock, flags);
+
 	card->driver->send_request(card, &t->packet);
 }
 EXPORT_SYMBOL(fw_send_request);
 
-struct fw_phy_packet {
-	struct fw_packet packet;
-	struct completion done;
-	struct kref kref;
-};
-
-static void phy_packet_release(struct kref *kref)
-{
-	struct fw_phy_packet *p =
-			container_of(kref, struct fw_phy_packet, kref);
-	kfree(p);
-}
+static DEFINE_MUTEX(phy_config_mutex);
+static DECLARE_COMPLETION(phy_config_done);
 
 static void transmit_phy_packet_callback(struct fw_packet *packet,
 					 struct fw_card *card, int status)
 {
-	struct fw_phy_packet *p =
-			container_of(packet, struct fw_phy_packet, packet);
-
-	complete(&p->done);
-	kref_put(&p->kref, phy_packet_release);
+	complete(&phy_config_done);
 }
 
+static struct fw_packet phy_config_packet = {
+	.header_length	= 8,
+	.payload_length	= 0,
+	.speed		= SCODE_100,
+	.callback	= transmit_phy_packet_callback,
+};
+
 void fw_send_phy_config(struct fw_card *card,
 			int node_id, int generation, int gap_count)
 {
-	struct fw_phy_packet *p;
 	long timeout = DIV_ROUND_UP(HZ, 10);
 	u32 data = PHY_IDENTIFIER(PHY_PACKET_CONFIG) |
 		   PHY_CONFIG_ROOT_ID(node_id) |
 		   PHY_CONFIG_GAP_COUNT(gap_count);
 
-	p = kmalloc(sizeof(*p), GFP_KERNEL);
-	if (p == NULL)
-		return;
+	mutex_lock(&phy_config_mutex);
+
+	phy_config_packet.header[0] = data;
+	phy_config_packet.header[1] = ~data;
+	phy_config_packet.generation = generation;
+	INIT_COMPLETION(phy_config_done);
+
+	card->driver->send_request(card, &phy_config_packet);
+	wait_for_completion_timeout(&phy_config_done, timeout);
 
-	p->packet.header[0] = data;
-	p->packet.header[1] = ~data;
-	p->packet.header_length = 8;
-	p->packet.payload_length = 0;
-	p->packet.speed = SCODE_100;
-	p->packet.generation = generation;
-	p->packet.callback = transmit_phy_packet_callback;
-	init_completion(&p->done);
-	kref_set(&p->kref, 2);
-
-	card->driver->send_request(card, &p->packet);
-	timeout = wait_for_completion_timeout(&p->done, timeout);
-	kref_put(&p->kref, phy_packet_release);
-
-	/* will leak p if the callback is never executed */
-	WARN_ON(timeout == 0);
+	mutex_unlock(&phy_config_mutex);
 }
 
 void fw_flush_transactions(struct fw_card *card)
diff --git a/drivers/firmware/dcdbas.c b/drivers/firmware/dcdbas.c
index 0b624e927a6f..50a071f1c945 100644
--- a/drivers/firmware/dcdbas.c
+++ b/drivers/firmware/dcdbas.c
@@ -152,20 +152,11 @@ static ssize_t smi_data_read(struct kobject *kobj,
 			     struct bin_attribute *bin_attr,
 			     char *buf, loff_t pos, size_t count)
 {
-	size_t max_read;
 	ssize_t ret;
 
 	mutex_lock(&smi_data_lock);
-
-	if (pos >= smi_data_buf_size) {
-		ret = 0;
-		goto out;
-	}
-
-	max_read = smi_data_buf_size - pos;
-	ret = min(max_read, count);
-	memcpy(buf, smi_data_buf + pos, ret);
-out:
+	ret = memory_read_from_buffer(buf, count, &pos, smi_data_buf,
+					smi_data_buf_size);
 	mutex_unlock(&smi_data_lock);
 	return ret;
 }
@@ -254,7 +245,6 @@ static ssize_t host_control_on_shutdown_store(struct device *dev,
 static int smi_request(struct smi_cmd *smi_cmd)
 {
 	cpumask_t old_mask;
-	cpumask_of_cpu_ptr(new_mask, 0);
 	int ret = 0;
 
 	if (smi_cmd->magic != SMI_CMD_MAGIC) {
@@ -265,7 +255,7 @@ static int smi_request(struct smi_cmd *smi_cmd)
 
 	/* SMI requires CPU 0 */
 	old_mask = current->cpus_allowed;
-	set_cpus_allowed_ptr(current, new_mask);
+	set_cpus_allowed_ptr(current, &cpumask_of_cpu(0));
 	if (smp_processor_id() != 0) {
 		dev_dbg(&dcdbas_pdev->dev, "%s: failed to get CPU 0\n",
 			__func__);
diff --git a/drivers/firmware/dell_rbu.c b/drivers/firmware/dell_rbu.c
index 7430e218cda6..13946ebd77d6 100644
--- a/drivers/firmware/dell_rbu.c
+++ b/drivers/firmware/dell_rbu.c
@@ -507,11 +507,6 @@ static ssize_t read_packet_data(char *buffer, loff_t pos, size_t count)
 
 static ssize_t read_rbu_mono_data(char *buffer, loff_t pos, size_t count)
 {
-	unsigned char *ptemp = NULL;
-	size_t bytes_left = 0;
-	size_t data_length = 0;
-	ssize_t ret_count = 0;
-
 	/* check to see if we have something to return */
 	if ((rbu_data.image_update_buffer == NULL) ||
 		(rbu_data.bios_image_size == 0)) {
@@ -519,28 +514,11 @@ static ssize_t read_rbu_mono_data(char *buffer, loff_t pos, size_t count)
 			"bios_image_size %lu\n",
 			rbu_data.image_update_buffer,
 			rbu_data.bios_image_size);
-		ret_count = -ENOMEM;
-		goto read_rbu_data_exit;
-	}
-
-	if (pos > rbu_data.bios_image_size) {
-		ret_count = 0;
-		goto read_rbu_data_exit;
+		return -ENOMEM;
 	}
 
-	bytes_left = rbu_data.bios_image_size - pos;
-	data_length = min(bytes_left, count);
-
-	ptemp = rbu_data.image_update_buffer;
-	memcpy(buffer, (ptemp + pos), data_length);
-
-	if ((pos + count) > rbu_data.bios_image_size)
-		/* this was the last copy */
-		ret_count = bytes_left;
-	else
-		ret_count = count;
-      read_rbu_data_exit:
-	return ret_count;
+	return memory_read_from_buffer(buffer, count, &pos,
+			rbu_data.image_update_buffer, rbu_data.bios_image_size);
 }
 
 static ssize_t read_rbu_data(struct kobject *kobj,
diff --git a/drivers/firmware/iscsi_ibft.c b/drivers/firmware/iscsi_ibft.c
index 8024e3bfd877..b91ef63126ed 100644
--- a/drivers/firmware/iscsi_ibft.c
+++ b/drivers/firmware/iscsi_ibft.c
@@ -669,8 +669,7 @@ static int __init ibft_register_kobjects(struct ibft_table_header *header,
 
 	control = (void *)header + sizeof(*header);
 	end = (void *)control + control->hdr.length;
-	eot_offset = (void *)header + header->length -
-		     (void *)control - sizeof(*header);
+	eot_offset = (void *)header + header->length - (void *)control;
 	rc = ibft_verify_hdr("control", (struct ibft_hdr *)control, id_control,
 			     sizeof(*control));
 
diff --git a/drivers/firmware/iscsi_ibft_find.c b/drivers/firmware/iscsi_ibft_find.c
index 11f17440fea6..d53fbbfefa3e 100644
--- a/drivers/firmware/iscsi_ibft_find.c
+++ b/drivers/firmware/iscsi_ibft_find.c
@@ -81,4 +81,3 @@ void __init reserve_ibft_region(void)
 	if (ibft_addr)
 		reserve_bootmem(pos, PAGE_ALIGN(len), BOOTMEM_DEFAULT);
 }
-EXPORT_SYMBOL_GPL(reserve_ibft_region);
diff --git a/drivers/firmware/memmap.c b/drivers/firmware/memmap.c
index e23399c7f773..3bf8ee120d42 100644
--- a/drivers/firmware/memmap.c
+++ b/drivers/firmware/memmap.c
@@ -84,20 +84,23 @@ static struct kobj_type memmap_ktype = {
  */
 
 /*
- * Firmware memory map entries
+ * Firmware memory map entries. No locking is needed because the
+ * firmware_map_add() and firmware_map_add_early() functions are called
+ * in firmware initialisation code in one single thread of execution.
  */
 static LIST_HEAD(map_entries);
 
 /**
- * Common implementation of firmware_map_add() and firmware_map_add_early()
- * which expects a pre-allocated struct firmware_map_entry.
- *
+ * firmware_map_add_entry() - Does the real work to add a firmware memmap entry.
  * @start: Start of the memory range.
  * @end:   End of the memory range (inclusive).
  * @type:  Type of the memory range.
  * @entry: Pre-allocated (either kmalloc() or bootmem allocator), uninitialised
  *         entry.
- */
+ *
+ * Common implementation of firmware_map_add() and firmware_map_add_early()
+ * which expects a pre-allocated struct firmware_map_entry.
+ **/
 static int firmware_map_add_entry(resource_size_t start, resource_size_t end,
 				  const char *type,
 				  struct firmware_map_entry *entry)
@@ -115,33 +118,52 @@ static int firmware_map_add_entry(resource_size_t start, resource_size_t end,
 	return 0;
 }
 
-/*
- * See <linux/firmware-map.h> for documentation.
- */
+/**
+ * firmware_map_add() - Adds a firmware mapping entry.
+ * @start: Start of the memory range.
+ * @end:   End of the memory range (inclusive).
+ * @type:  Type of the memory range.
+ *
+ * This function uses kmalloc() for memory
+ * allocation. Use firmware_map_add_early() if you want to use the bootmem
+ * allocator.
+ *
+ * That function must be called before late_initcall.
+ *
+ * Returns 0 on success, or -ENOMEM if no memory could be allocated.
+ **/
 int firmware_map_add(resource_size_t start, resource_size_t end,
 		     const char *type)
 {
 	struct firmware_map_entry *entry;
 
 	entry = kmalloc(sizeof(struct firmware_map_entry), GFP_ATOMIC);
-	WARN_ON(!entry);
 	if (!entry)
 		return -ENOMEM;
 
 	return firmware_map_add_entry(start, end, type, entry);
 }
 
-/*
- * See <linux/firmware-map.h> for documentation.
- */
+/**
+ * firmware_map_add_early() - Adds a firmware mapping entry.
+ * @start: Start of the memory range.
+ * @end:   End of the memory range (inclusive).
+ * @type:  Type of the memory range.
+ *
+ * Adds a firmware mapping entry. This function uses the bootmem allocator
+ * for memory allocation. Use firmware_map_add() if you want to use kmalloc().
+ *
+ * That function must be called before late_initcall.
+ *
+ * Returns 0 on success, or -ENOMEM if no memory could be allocated.
+ **/
 int __init firmware_map_add_early(resource_size_t start, resource_size_t end,
 				  const char *type)
 {
 	struct firmware_map_entry *entry;
 
 	entry = alloc_bootmem_low(sizeof(struct firmware_map_entry));
-	WARN_ON(!entry);
-	if (!entry)
+	if (WARN_ON(!entry))
 		return -ENOMEM;
 
 	return firmware_map_add_entry(start, end, type, entry);
@@ -153,12 +175,14 @@ int __init firmware_map_add_early(resource_size_t start, resource_size_t end,
 
 static ssize_t start_show(struct firmware_map_entry *entry, char *buf)
 {
-	return snprintf(buf, PAGE_SIZE, "0x%llx\n", entry->start);
+	return snprintf(buf, PAGE_SIZE, "0x%llx\n",
+		(unsigned long long)entry->start);
 }
 
 static ssize_t end_show(struct firmware_map_entry *entry, char *buf)
 {
-	return snprintf(buf, PAGE_SIZE, "0x%llx\n", entry->end);
+	return snprintf(buf, PAGE_SIZE, "0x%llx\n",
+		(unsigned long long)entry->end);
 }
 
 static ssize_t type_show(struct firmware_map_entry *entry, char *buf)
@@ -181,7 +205,10 @@ static ssize_t memmap_attr_show(struct kobject *kobj,
 /*
  * Initialises stuff and adds the entries in the map_entries list to
  * sysfs. Important is that firmware_map_add() and firmware_map_add_early()
- * must be called before late_initcall.
+ * must be called before late_initcall. That's just because that function
+ * is called as late_initcall() function, which means that if you call
+ * firmware_map_add() or firmware_map_add_early() afterwards, the entries
+ * are not added to sysfs.
  */
 static int __init memmap_init(void)
 {
@@ -190,13 +217,13 @@ static int __init memmap_init(void)
 	struct kset *memmap_kset;
 
 	memmap_kset = kset_create_and_add("memmap", NULL, firmware_kobj);
-	WARN_ON(!memmap_kset);
-	if (!memmap_kset)
+	if (WARN_ON(!memmap_kset))
 		return -ENOMEM;
 
 	list_for_each_entry(entry, &map_entries, list) {
 		entry->kobj.kset = memmap_kset;
-		kobject_add(&entry->kobj, NULL, "%d", i++);
+		if (kobject_add(&entry->kobj, NULL, "%d", i++))
+			kobject_put(&entry->kobj);
 	}
 
 	return 0;
diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
index fced1909cbba..dbd42d6c93a7 100644
--- a/drivers/gpio/Kconfig
+++ b/drivers/gpio/Kconfig
@@ -2,15 +2,40 @@
 # GPIO infrastructure and expanders
 #
 
-config HAVE_GPIO_LIB
+config ARCH_WANT_OPTIONAL_GPIOLIB
 	bool
 	help
+	  Select this config option from the architecture Kconfig, if
+	  it is possible to use gpiolib on the architecture, but let the
+	  user decide whether to actually build it or not.
+	  Select this instead of ARCH_REQUIRE_GPIOLIB, if your architecture does
+	  not depend on GPIOs being available, but rather let the user
+	  decide whether he needs it or not.
+
+config ARCH_REQUIRE_GPIOLIB
+	bool
+	select GPIOLIB
+	help
 	  Platforms select gpiolib if they use this infrastructure
 	  for all their GPIOs, usually starting with ones integrated
 	  into SOC processors.
+	  Selecting this from the architecture code will cause the gpiolib
+	  code to always get built in.
+
+
+
+menuconfig GPIOLIB
+	bool "GPIO Support"
+	depends on ARCH_WANT_OPTIONAL_GPIOLIB || ARCH_REQUIRE_GPIOLIB
+	select GENERIC_GPIO
+	help
+	  This enables GPIO support through the generic GPIO library.
+	  You only need to enable this, if you also want to enable
+	  one or more of the GPIO expansion card drivers below.
 
-menu "GPIO Support"
-	depends on HAVE_GPIO_LIB
+	  If unsure, say N.
+
+if GPIOLIB
 
 config DEBUG_GPIO
 	bool "Debug GPIO calls"
@@ -23,10 +48,44 @@ config DEBUG_GPIO
 	  slower.  The diagnostics help catch the type of setup errors
 	  that are most common when setting up new platforms or boards.
 
+config GPIO_SYSFS
+	bool "/sys/class/gpio/... (sysfs interface)"
+	depends on SYSFS && EXPERIMENTAL
+	help
+	  Say Y here to add a sysfs interface for GPIOs.
+
+	  This is mostly useful to work around omissions in a system's
+	  kernel support.  Those are common in custom and semicustom
+	  hardware assembled using standard kernels with a minimum of
+	  custom patches.  In those cases, userspace code may import
+	  a given GPIO from the kernel, if no kernel driver requested it.
+
+	  Kernel drivers may also request that a particular GPIO be
+	  exported to userspace; this can be useful when debugging.
+
 # put expanders in the right section, in alphabetical order
 
 comment "I2C GPIO expanders:"
 
+config GPIO_MAX732X
+	tristate "MAX7319, MAX7320-7327 I2C Port Expanders"
+	depends on I2C
+	help
+	  Say yes here to support the MAX7319, MAX7320-7327 series of I2C
+	  Port Expanders. Each IO port on these chips has a fixed role of
+	  Input (designated by 'I'), Push-Pull Output ('O'), or Open-Drain
+	  Input and Output (designed by 'P'). The combinations are listed
+	  below:
+
+	  8 bits:	max7319 (8I), max7320 (8O), max7321 (8P),
+		  	max7322 (4I4O), max7323 (4P4O)
+
+	  16 bits:	max7324 (8I8O), max7325 (8P8O),
+		  	max7326 (4I12O), max7327 (4P12O)
+
+	  Board setup code must specify the model to use, and the start
+	  number for these GPIOs.
+
 config GPIO_PCA953X
 	tristate "PCA953x, PCA955x, and MAX7310 I/O ports"
 	depends on I2C
@@ -68,6 +127,24 @@ config GPIO_PCF857X
 	  This driver provides an in-kernel interface to those GPIOs using
 	  platform-neutral GPIO calls.
 
+comment "PCI GPIO expanders:"
+
+config GPIO_BT8XX
+	tristate "BT8XX GPIO abuser"
+	depends on PCI && VIDEO_BT848=n
+	help
+	  The BT8xx frame grabber chip has 24 GPIO pins than can be abused
+	  as a cheap PCI GPIO card.
+
+	  This chip can be found on Miro, Hauppauge and STB TV-cards.
+
+	  The card needs to be physically altered for using it as a
+	  GPIO card. For more information on how to build a GPIO card
+	  from a BT8xx TV card, see the documentation file at
+	  Documentation/bt8xxgpio.txt
+
+	  If unsure, say N.
+
 comment "SPI GPIO expanders:"
 
 config GPIO_MAX7301
@@ -83,4 +160,4 @@ config GPIO_MCP23S08
 	  SPI driver for Microchip MCP23S08 I/O expander.  This provides
 	  a GPIO interface supporting inputs and outputs.
 
-endmenu
+endif
diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile
index 16e796dc5410..01b4bbde1956 100644
--- a/drivers/gpio/Makefile
+++ b/drivers/gpio/Makefile
@@ -2,9 +2,11 @@
 
 ccflags-$(CONFIG_DEBUG_GPIO)	+= -DDEBUG
 
-obj-$(CONFIG_HAVE_GPIO_LIB)	+= gpiolib.o
+obj-$(CONFIG_GPIOLIB)		+= gpiolib.o
 
 obj-$(CONFIG_GPIO_MAX7301)	+= max7301.o
+obj-$(CONFIG_GPIO_MAX732X)	+= max732x.o
 obj-$(CONFIG_GPIO_MCP23S08)	+= mcp23s08.o
 obj-$(CONFIG_GPIO_PCA953X)	+= pca953x.o
 obj-$(CONFIG_GPIO_PCF857X)	+= pcf857x.o
+obj-$(CONFIG_GPIO_BT8XX)	+= bt8xxgpio.o
diff --git a/drivers/gpio/bt8xxgpio.c b/drivers/gpio/bt8xxgpio.c
new file mode 100644
index 000000000000..7a1168249dd5
--- /dev/null
+++ b/drivers/gpio/bt8xxgpio.c
@@ -0,0 +1,348 @@
+/*
+
+    bt8xx GPIO abuser
+
+    Copyright (C) 2008 Michael Buesch <mb@bu3sch.de>
+
+    Please do _only_ contact the people listed _above_ with issues related to this driver.
+    All the other people listed below are not related to this driver. Their names
+    are only here, because this driver is derived from the bt848 driver.
+
+
+    Derived from the bt848 driver:
+
+    Copyright (C) 1996,97,98 Ralph  Metzler
+			   & Marcus Metzler
+    (c) 1999-2002 Gerd Knorr
+
+    some v4l2 code lines are taken from Justin's bttv2 driver which is
+    (c) 2000 Justin Schoeman
+
+    V4L1 removal from:
+    (c) 2005-2006 Nickolay V. Shmyrev
+
+    Fixes to be fully V4L2 compliant by
+    (c) 2006 Mauro Carvalho Chehab
+
+    Cropping and overscan support
+    Copyright (C) 2005, 2006 Michael H. Schimek
+    Sponsored by OPQ Systems AB
+
+    This program is free software; you can redistribute it and/or modify
+    it under the terms of the GNU General Public License as published by
+    the Free Software Foundation; either version 2 of the License, or
+    (at your option) any later version.
+
+    This program is distributed in the hope that it will be useful,
+    but WITHOUT ANY WARRANTY; without even the implied warranty of
+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    GNU General Public License for more details.
+
+    You should have received a copy of the GNU General Public License
+    along with this program; if not, write to the Free Software
+    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/spinlock.h>
+
+#include <asm/gpio.h>
+
+/* Steal the hardware definitions from the bttv driver. */
+#include "../media/video/bt8xx/bt848.h"
+
+
+#define BT8XXGPIO_NR_GPIOS		24 /* We have 24 GPIO pins */
+
+
+struct bt8xxgpio {
+	spinlock_t lock;
+
+	void __iomem *mmio;
+	struct pci_dev *pdev;
+	struct gpio_chip gpio;
+
+#ifdef CONFIG_PM
+	u32 saved_outen;
+	u32 saved_data;
+#endif
+};
+
+#define bgwrite(dat, adr)	writel((dat), bg->mmio+(adr))
+#define bgread(adr)		readl(bg->mmio+(adr))
+
+
+static int modparam_gpiobase = -1/* dynamic */;
+module_param_named(gpiobase, modparam_gpiobase, int, 0444);
+MODULE_PARM_DESC(gpiobase, "The GPIO number base. -1 means dynamic, which is the default.");
+
+
+static int bt8xxgpio_gpio_direction_input(struct gpio_chip *gpio, unsigned nr)
+{
+	struct bt8xxgpio *bg = container_of(gpio, struct bt8xxgpio, gpio);
+	unsigned long flags;
+	u32 outen, data;
+
+	spin_lock_irqsave(&bg->lock, flags);
+
+	data = bgread(BT848_GPIO_DATA);
+	data &= ~(1 << nr);
+	bgwrite(data, BT848_GPIO_DATA);
+
+	outen = bgread(BT848_GPIO_OUT_EN);
+	outen &= ~(1 << nr);
+	bgwrite(outen, BT848_GPIO_OUT_EN);
+
+	spin_unlock_irqrestore(&bg->lock, flags);
+
+	return 0;
+}
+
+static int bt8xxgpio_gpio_get(struct gpio_chip *gpio, unsigned nr)
+{
+	struct bt8xxgpio *bg = container_of(gpio, struct bt8xxgpio, gpio);
+	unsigned long flags;
+	u32 val;
+
+	spin_lock_irqsave(&bg->lock, flags);
+	val = bgread(BT848_GPIO_DATA);
+	spin_unlock_irqrestore(&bg->lock, flags);
+
+	return !!(val & (1 << nr));
+}
+
+static int bt8xxgpio_gpio_direction_output(struct gpio_chip *gpio,
+					unsigned nr, int val)
+{
+	struct bt8xxgpio *bg = container_of(gpio, struct bt8xxgpio, gpio);
+	unsigned long flags;
+	u32 outen, data;
+
+	spin_lock_irqsave(&bg->lock, flags);
+
+	outen = bgread(BT848_GPIO_OUT_EN);
+	outen |= (1 << nr);
+	bgwrite(outen, BT848_GPIO_OUT_EN);
+
+	data = bgread(BT848_GPIO_DATA);
+	if (val)
+		data |= (1 << nr);
+	else
+		data &= ~(1 << nr);
+	bgwrite(data, BT848_GPIO_DATA);
+
+	spin_unlock_irqrestore(&bg->lock, flags);
+
+	return 0;
+}
+
+static void bt8xxgpio_gpio_set(struct gpio_chip *gpio,
+			    unsigned nr, int val)
+{
+	struct bt8xxgpio *bg = container_of(gpio, struct bt8xxgpio, gpio);
+	unsigned long flags;
+	u32 data;
+
+	spin_lock_irqsave(&bg->lock, flags);
+
+	data = bgread(BT848_GPIO_DATA);
+	if (val)
+		data |= (1 << nr);
+	else
+		data &= ~(1 << nr);
+	bgwrite(data, BT848_GPIO_DATA);
+
+	spin_unlock_irqrestore(&bg->lock, flags);
+}
+
+static void bt8xxgpio_gpio_setup(struct bt8xxgpio *bg)
+{
+	struct gpio_chip *c = &bg->gpio;
+
+	c->label = bg->pdev->dev.bus_id;
+	c->owner = THIS_MODULE;
+	c->direction_input = bt8xxgpio_gpio_direction_input;
+	c->get = bt8xxgpio_gpio_get;
+	c->direction_output = bt8xxgpio_gpio_direction_output;
+	c->set = bt8xxgpio_gpio_set;
+	c->dbg_show = NULL;
+	c->base = modparam_gpiobase;
+	c->ngpio = BT8XXGPIO_NR_GPIOS;
+	c->can_sleep = 0;
+}
+
+static int bt8xxgpio_probe(struct pci_dev *dev,
+			const struct pci_device_id *pci_id)
+{
+	struct bt8xxgpio *bg;
+	int err;
+
+	bg = kzalloc(sizeof(*bg), GFP_KERNEL);
+	if (!bg)
+		return -ENOMEM;
+
+	bg->pdev = dev;
+	spin_lock_init(&bg->lock);
+
+	err = pci_enable_device(dev);
+	if (err) {
+		printk(KERN_ERR "bt8xxgpio: Can't enable device.\n");
+		goto err_freebg;
+	}
+	if (!request_mem_region(pci_resource_start(dev, 0),
+				pci_resource_len(dev, 0),
+				"bt8xxgpio")) {
+		printk(KERN_WARNING "bt8xxgpio: Can't request iomem (0x%llx).\n",
+		       (unsigned long long)pci_resource_start(dev, 0));
+		err = -EBUSY;
+		goto err_disable;
+	}
+	pci_set_master(dev);
+	pci_set_drvdata(dev, bg);
+
+	bg->mmio = ioremap(pci_resource_start(dev, 0), 0x1000);
+	if (!bg->mmio) {
+		printk(KERN_ERR "bt8xxgpio: ioremap() failed\n");
+		err = -EIO;
+		goto err_release_mem;
+	}
+
+	/* Disable interrupts */
+	bgwrite(0, BT848_INT_MASK);
+
+	/* gpio init */
+	bgwrite(0, BT848_GPIO_DMA_CTL);
+	bgwrite(0, BT848_GPIO_REG_INP);
+	bgwrite(0, BT848_GPIO_OUT_EN);
+
+	bt8xxgpio_gpio_setup(bg);
+	err = gpiochip_add(&bg->gpio);
+	if (err) {
+		printk(KERN_ERR "bt8xxgpio: Failed to register GPIOs\n");
+		goto err_release_mem;
+	}
+
+	printk(KERN_INFO "bt8xxgpio: Abusing BT8xx card for GPIOs %d to %d\n",
+	       bg->gpio.base, bg->gpio.base + BT8XXGPIO_NR_GPIOS - 1);
+
+	return 0;
+
+err_release_mem:
+	release_mem_region(pci_resource_start(dev, 0),
+			   pci_resource_len(dev, 0));
+	pci_set_drvdata(dev, NULL);
+err_disable:
+	pci_disable_device(dev);
+err_freebg:
+	kfree(bg);
+
+	return err;
+}
+
+static void bt8xxgpio_remove(struct pci_dev *pdev)
+{
+	struct bt8xxgpio *bg = pci_get_drvdata(pdev);
+
+	gpiochip_remove(&bg->gpio);
+
+	bgwrite(0, BT848_INT_MASK);
+	bgwrite(~0x0, BT848_INT_STAT);
+	bgwrite(0x0, BT848_GPIO_OUT_EN);
+
+	iounmap(bg->mmio);
+	release_mem_region(pci_resource_start(pdev, 0),
+			   pci_resource_len(pdev, 0));
+	pci_disable_device(pdev);
+
+	pci_set_drvdata(pdev, NULL);
+	kfree(bg);
+}
+
+#ifdef CONFIG_PM
+static int bt8xxgpio_suspend(struct pci_dev *pdev, pm_message_t state)
+{
+	struct bt8xxgpio *bg = pci_get_drvdata(pdev);
+	unsigned long flags;
+
+	spin_lock_irqsave(&bg->lock, flags);
+
+	bg->saved_outen = bgread(BT848_GPIO_OUT_EN);
+	bg->saved_data = bgread(BT848_GPIO_DATA);
+
+	bgwrite(0, BT848_INT_MASK);
+	bgwrite(~0x0, BT848_INT_STAT);
+	bgwrite(0x0, BT848_GPIO_OUT_EN);
+
+	spin_unlock_irqrestore(&bg->lock, flags);
+
+	pci_save_state(pdev);
+	pci_disable_device(pdev);
+	pci_set_power_state(pdev, pci_choose_state(pdev, state));
+
+	return 0;
+}
+
+static int bt8xxgpio_resume(struct pci_dev *pdev)
+{
+	struct bt8xxgpio *bg = pci_get_drvdata(pdev);
+	unsigned long flags;
+	int err;
+
+	pci_set_power_state(pdev, 0);
+	err = pci_enable_device(pdev);
+	if (err)
+		return err;
+	pci_restore_state(pdev);
+
+	spin_lock_irqsave(&bg->lock, flags);
+
+	bgwrite(0, BT848_INT_MASK);
+	bgwrite(0, BT848_GPIO_DMA_CTL);
+	bgwrite(0, BT848_GPIO_REG_INP);
+	bgwrite(bg->saved_outen, BT848_GPIO_OUT_EN);
+	bgwrite(bg->saved_data & bg->saved_outen,
+		BT848_GPIO_DATA);
+
+	spin_unlock_irqrestore(&bg->lock, flags);
+
+	return 0;
+}
+#else
+#define bt8xxgpio_suspend NULL
+#define bt8xxgpio_resume NULL
+#endif /* CONFIG_PM */
+
+static struct pci_device_id bt8xxgpio_pci_tbl[] = {
+	{ PCI_DEVICE(PCI_VENDOR_ID_BROOKTREE, PCI_DEVICE_ID_BT848) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_BROOKTREE, PCI_DEVICE_ID_BT849) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_BROOKTREE, PCI_DEVICE_ID_BT878) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_BROOKTREE, PCI_DEVICE_ID_BT879) },
+	{ 0, },
+};
+MODULE_DEVICE_TABLE(pci, bt8xxgpio_pci_tbl);
+
+static struct pci_driver bt8xxgpio_pci_driver = {
+	.name		= "bt8xxgpio",
+	.id_table	= bt8xxgpio_pci_tbl,
+	.probe		= bt8xxgpio_probe,
+	.remove		= bt8xxgpio_remove,
+	.suspend	= bt8xxgpio_suspend,
+	.resume		= bt8xxgpio_resume,
+};
+
+static int bt8xxgpio_init(void)
+{
+	return pci_register_driver(&bt8xxgpio_pci_driver);
+}
+module_init(bt8xxgpio_init)
+
+static void bt8xxgpio_exit(void)
+{
+	pci_unregister_driver(&bt8xxgpio_pci_driver);
+}
+module_exit(bt8xxgpio_exit)
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Michael Buesch");
+MODULE_DESCRIPTION("Abuse a BT8xx framegrabber card as generic GPIO card");
diff --git a/drivers/gpio/gpiolib.c b/drivers/gpio/gpiolib.c
index beaf6b3a37dc..8d2940517c99 100644
--- a/drivers/gpio/gpiolib.c
+++ b/drivers/gpio/gpiolib.c
@@ -2,8 +2,11 @@
 #include <linux/module.h>
 #include <linux/irq.h>
 #include <linux/spinlock.h>
-
-#include <asm/gpio.h>
+#include <linux/device.h>
+#include <linux/err.h>
+#include <linux/debugfs.h>
+#include <linux/seq_file.h>
+#include <linux/gpio.h>
 
 
 /* Optional implementation infrastructure for GPIO interfaces.
@@ -44,6 +47,8 @@ struct gpio_desc {
 #define FLAG_REQUESTED	0
 #define FLAG_IS_OUT	1
 #define FLAG_RESERVED	2
+#define FLAG_EXPORT	3	/* protected by sysfs_lock */
+#define FLAG_SYSFS	4	/* exported via /sys/class/gpio/control */
 
 #ifdef CONFIG_DEBUG_FS
 	const char		*label;
@@ -151,6 +156,482 @@ err:
 	return ret;
 }
 
+#ifdef CONFIG_GPIO_SYSFS
+
+/* lock protects against unexport_gpio() being called while
+ * sysfs files are active.
+ */
+static DEFINE_MUTEX(sysfs_lock);
+
+/*
+ * /sys/class/gpio/gpioN... only for GPIOs that are exported
+ *   /direction
+ *      * MAY BE OMITTED if kernel won't allow direction changes
+ *      * is read/write as "in" or "out"
+ *      * may also be written as "high" or "low", initializing
+ *        output value as specified ("out" implies "low")
+ *   /value
+ *      * always readable, subject to hardware behavior
+ *      * may be writable, as zero/nonzero
+ *
+ * REVISIT there will likely be an attribute for configuring async
+ * notifications, e.g. to specify polling interval or IRQ trigger type
+ * that would for example trigger a poll() on the "value".
+ */
+
+static ssize_t gpio_direction_show(struct device *dev,
+		struct device_attribute *attr, char *buf)
+{
+	const struct gpio_desc	*desc = dev_get_drvdata(dev);
+	ssize_t			status;
+
+	mutex_lock(&sysfs_lock);
+
+	if (!test_bit(FLAG_EXPORT, &desc->flags))
+		status = -EIO;
+	else
+		status = sprintf(buf, "%s\n",
+			test_bit(FLAG_IS_OUT, &desc->flags)
+				? "out" : "in");
+
+	mutex_unlock(&sysfs_lock);
+	return status;
+}
+
+static ssize_t gpio_direction_store(struct device *dev,
+		struct device_attribute *attr, const char *buf, size_t size)
+{
+	const struct gpio_desc	*desc = dev_get_drvdata(dev);
+	unsigned		gpio = desc - gpio_desc;
+	ssize_t			status;
+
+	mutex_lock(&sysfs_lock);
+
+	if (!test_bit(FLAG_EXPORT, &desc->flags))
+		status = -EIO;
+	else if (sysfs_streq(buf, "high"))
+		status = gpio_direction_output(gpio, 1);
+	else if (sysfs_streq(buf, "out") || sysfs_streq(buf, "low"))
+		status = gpio_direction_output(gpio, 0);
+	else if (sysfs_streq(buf, "in"))
+		status = gpio_direction_input(gpio);
+	else
+		status = -EINVAL;
+
+	mutex_unlock(&sysfs_lock);
+	return status ? : size;
+}
+
+static const DEVICE_ATTR(direction, 0644,
+		gpio_direction_show, gpio_direction_store);
+
+static ssize_t gpio_value_show(struct device *dev,
+		struct device_attribute *attr, char *buf)
+{
+	const struct gpio_desc	*desc = dev_get_drvdata(dev);
+	unsigned		gpio = desc - gpio_desc;
+	ssize_t			status;
+
+	mutex_lock(&sysfs_lock);
+
+	if (!test_bit(FLAG_EXPORT, &desc->flags))
+		status = -EIO;
+	else
+		status = sprintf(buf, "%d\n", gpio_get_value_cansleep(gpio));
+
+	mutex_unlock(&sysfs_lock);
+	return status;
+}
+
+static ssize_t gpio_value_store(struct device *dev,
+		struct device_attribute *attr, const char *buf, size_t size)
+{
+	const struct gpio_desc	*desc = dev_get_drvdata(dev);
+	unsigned		gpio = desc - gpio_desc;
+	ssize_t			status;
+
+	mutex_lock(&sysfs_lock);
+
+	if (!test_bit(FLAG_EXPORT, &desc->flags))
+		status = -EIO;
+	else if (!test_bit(FLAG_IS_OUT, &desc->flags))
+		status = -EPERM;
+	else {
+		long		value;
+
+		status = strict_strtol(buf, 0, &value);
+		if (status == 0) {
+			gpio_set_value_cansleep(gpio, value != 0);
+			status = size;
+		}
+	}
+
+	mutex_unlock(&sysfs_lock);
+	return status;
+}
+
+static /*const*/ DEVICE_ATTR(value, 0644,
+		gpio_value_show, gpio_value_store);
+
+static const struct attribute *gpio_attrs[] = {
+	&dev_attr_direction.attr,
+	&dev_attr_value.attr,
+	NULL,
+};
+
+static const struct attribute_group gpio_attr_group = {
+	.attrs = (struct attribute **) gpio_attrs,
+};
+
+/*
+ * /sys/class/gpio/gpiochipN/
+ *   /base ... matching gpio_chip.base (N)
+ *   /label ... matching gpio_chip.label
+ *   /ngpio ... matching gpio_chip.ngpio
+ */
+
+static ssize_t chip_base_show(struct device *dev,
+			       struct device_attribute *attr, char *buf)
+{
+	const struct gpio_chip	*chip = dev_get_drvdata(dev);
+
+	return sprintf(buf, "%d\n", chip->base);
+}
+static DEVICE_ATTR(base, 0444, chip_base_show, NULL);
+
+static ssize_t chip_label_show(struct device *dev,
+			       struct device_attribute *attr, char *buf)
+{
+	const struct gpio_chip	*chip = dev_get_drvdata(dev);
+
+	return sprintf(buf, "%s\n", chip->label ? : "");
+}
+static DEVICE_ATTR(label, 0444, chip_label_show, NULL);
+
+static ssize_t chip_ngpio_show(struct device *dev,
+			       struct device_attribute *attr, char *buf)
+{
+	const struct gpio_chip	*chip = dev_get_drvdata(dev);
+
+	return sprintf(buf, "%u\n", chip->ngpio);
+}
+static DEVICE_ATTR(ngpio, 0444, chip_ngpio_show, NULL);
+
+static const struct attribute *gpiochip_attrs[] = {
+	&dev_attr_base.attr,
+	&dev_attr_label.attr,
+	&dev_attr_ngpio.attr,
+	NULL,
+};
+
+static const struct attribute_group gpiochip_attr_group = {
+	.attrs = (struct attribute **) gpiochip_attrs,
+};
+
+/*
+ * /sys/class/gpio/export ... write-only
+ *	integer N ... number of GPIO to export (full access)
+ * /sys/class/gpio/unexport ... write-only
+ *	integer N ... number of GPIO to unexport
+ */
+static ssize_t export_store(struct class *class, const char *buf, size_t len)
+{
+	long	gpio;
+	int	status;
+
+	status = strict_strtol(buf, 0, &gpio);
+	if (status < 0)
+		goto done;
+
+	/* No extra locking here; FLAG_SYSFS just signifies that the
+	 * request and export were done by on behalf of userspace, so
+	 * they may be undone on its behalf too.
+	 */
+
+	status = gpio_request(gpio, "sysfs");
+	if (status < 0)
+		goto done;
+
+	status = gpio_export(gpio, true);
+	if (status < 0)
+		gpio_free(gpio);
+	else
+		set_bit(FLAG_SYSFS, &gpio_desc[gpio].flags);
+
+done:
+	if (status)
+		pr_debug("%s: status %d\n", __func__, status);
+	return status ? : len;
+}
+
+static ssize_t unexport_store(struct class *class, const char *buf, size_t len)
+{
+	long	gpio;
+	int	status;
+
+	status = strict_strtol(buf, 0, &gpio);
+	if (status < 0)
+		goto done;
+
+	status = -EINVAL;
+
+	/* reject bogus commands (gpio_unexport ignores them) */
+	if (!gpio_is_valid(gpio))
+		goto done;
+
+	/* No extra locking here; FLAG_SYSFS just signifies that the
+	 * request and export were done by on behalf of userspace, so
+	 * they may be undone on its behalf too.
+	 */
+	if (test_and_clear_bit(FLAG_SYSFS, &gpio_desc[gpio].flags)) {
+		status = 0;
+		gpio_free(gpio);
+	}
+done:
+	if (status)
+		pr_debug("%s: status %d\n", __func__, status);
+	return status ? : len;
+}
+
+static struct class_attribute gpio_class_attrs[] = {
+	__ATTR(export, 0200, NULL, export_store),
+	__ATTR(unexport, 0200, NULL, unexport_store),
+	__ATTR_NULL,
+};
+
+static struct class gpio_class = {
+	.name =		"gpio",
+	.owner =	THIS_MODULE,
+
+	.class_attrs =	gpio_class_attrs,
+};
+
+
+/**
+ * gpio_export - export a GPIO through sysfs
+ * @gpio: gpio to make available, already requested
+ * @direction_may_change: true if userspace may change gpio direction
+ * Context: arch_initcall or later
+ *
+ * When drivers want to make a GPIO accessible to userspace after they
+ * have requested it -- perhaps while debugging, or as part of their
+ * public interface -- they may use this routine.  If the GPIO can
+ * change direction (some can't) and the caller allows it, userspace
+ * will see "direction" sysfs attribute which may be used to change
+ * the gpio's direction.  A "value" attribute will always be provided.
+ *
+ * Returns zero on success, else an error.
+ */
+int gpio_export(unsigned gpio, bool direction_may_change)
+{
+	unsigned long		flags;
+	struct gpio_desc	*desc;
+	int			status = -EINVAL;
+
+	/* can't export until sysfs is available ... */
+	if (!gpio_class.p) {
+		pr_debug("%s: called too early!\n", __func__);
+		return -ENOENT;
+	}
+
+	if (!gpio_is_valid(gpio))
+		goto done;
+
+	mutex_lock(&sysfs_lock);
+
+	spin_lock_irqsave(&gpio_lock, flags);
+	desc = &gpio_desc[gpio];
+	if (test_bit(FLAG_REQUESTED, &desc->flags)
+			&& !test_bit(FLAG_EXPORT, &desc->flags)) {
+		status = 0;
+		if (!desc->chip->direction_input
+				|| !desc->chip->direction_output)
+			direction_may_change = false;
+	}
+	spin_unlock_irqrestore(&gpio_lock, flags);
+
+	if (status == 0) {
+		struct device	*dev;
+
+		dev = device_create(&gpio_class, desc->chip->dev, MKDEV(0, 0),
+					desc, "gpio%d", gpio);
+		if (dev) {
+			if (direction_may_change)
+				status = sysfs_create_group(&dev->kobj,
+						&gpio_attr_group);
+			else
+				status = device_create_file(dev,
+						&dev_attr_value);
+			if (status != 0)
+				device_unregister(dev);
+		} else
+			status = -ENODEV;
+		if (status == 0)
+			set_bit(FLAG_EXPORT, &desc->flags);
+	}
+
+	mutex_unlock(&sysfs_lock);
+
+done:
+	if (status)
+		pr_debug("%s: gpio%d status %d\n", __func__, gpio, status);
+
+	return status;
+}
+EXPORT_SYMBOL_GPL(gpio_export);
+
+static int match_export(struct device *dev, void *data)
+{
+	return dev_get_drvdata(dev) == data;
+}
+
+/**
+ * gpio_unexport - reverse effect of gpio_export()
+ * @gpio: gpio to make unavailable
+ *
+ * This is implicit on gpio_free().
+ */
+void gpio_unexport(unsigned gpio)
+{
+	struct gpio_desc	*desc;
+	int			status = -EINVAL;
+
+	if (!gpio_is_valid(gpio))
+		goto done;
+
+	mutex_lock(&sysfs_lock);
+
+	desc = &gpio_desc[gpio];
+	if (test_bit(FLAG_EXPORT, &desc->flags)) {
+		struct device	*dev = NULL;
+
+		dev = class_find_device(&gpio_class, NULL, desc, match_export);
+		if (dev) {
+			clear_bit(FLAG_EXPORT, &desc->flags);
+			put_device(dev);
+			device_unregister(dev);
+			status = 0;
+		} else
+			status = -ENODEV;
+	}
+
+	mutex_unlock(&sysfs_lock);
+done:
+	if (status)
+		pr_debug("%s: gpio%d status %d\n", __func__, gpio, status);
+}
+EXPORT_SYMBOL_GPL(gpio_unexport);
+
+static int gpiochip_export(struct gpio_chip *chip)
+{
+	int		status;
+	struct device	*dev;
+
+	/* Many systems register gpio chips for SOC support very early,
+	 * before driver model support is available.  In those cases we
+	 * export this later, in gpiolib_sysfs_init() ... here we just
+	 * verify that _some_ field of gpio_class got initialized.
+	 */
+	if (!gpio_class.p)
+		return 0;
+
+	/* use chip->base for the ID; it's already known to be unique */
+	mutex_lock(&sysfs_lock);
+	dev = device_create(&gpio_class, chip->dev, MKDEV(0, 0), chip,
+				"gpiochip%d", chip->base);
+	if (dev) {
+		status = sysfs_create_group(&dev->kobj,
+				&gpiochip_attr_group);
+	} else
+		status = -ENODEV;
+	chip->exported = (status == 0);
+	mutex_unlock(&sysfs_lock);
+
+	if (status) {
+		unsigned long	flags;
+		unsigned	gpio;
+
+		spin_lock_irqsave(&gpio_lock, flags);
+		gpio = chip->base;
+		while (gpio_desc[gpio].chip == chip)
+			gpio_desc[gpio++].chip = NULL;
+		spin_unlock_irqrestore(&gpio_lock, flags);
+
+		pr_debug("%s: chip %s status %d\n", __func__,
+				chip->label, status);
+	}
+
+	return status;
+}
+
+static void gpiochip_unexport(struct gpio_chip *chip)
+{
+	int			status;
+	struct device		*dev;
+
+	mutex_lock(&sysfs_lock);
+	dev = class_find_device(&gpio_class, NULL, chip, match_export);
+	if (dev) {
+		put_device(dev);
+		device_unregister(dev);
+		chip->exported = 0;
+		status = 0;
+	} else
+		status = -ENODEV;
+	mutex_unlock(&sysfs_lock);
+
+	if (status)
+		pr_debug("%s: chip %s status %d\n", __func__,
+				chip->label, status);
+}
+
+static int __init gpiolib_sysfs_init(void)
+{
+	int		status;
+	unsigned long	flags;
+	unsigned	gpio;
+
+	status = class_register(&gpio_class);
+	if (status < 0)
+		return status;
+
+	/* Scan and register the gpio_chips which registered very
+	 * early (e.g. before the class_register above was called).
+	 *
+	 * We run before arch_initcall() so chip->dev nodes can have
+	 * registered, and so arch_initcall() can always gpio_export().
+	 */
+	spin_lock_irqsave(&gpio_lock, flags);
+	for (gpio = 0; gpio < ARCH_NR_GPIOS; gpio++) {
+		struct gpio_chip	*chip;
+
+		chip = gpio_desc[gpio].chip;
+		if (!chip || chip->exported)
+			continue;
+
+		spin_unlock_irqrestore(&gpio_lock, flags);
+		status = gpiochip_export(chip);
+		spin_lock_irqsave(&gpio_lock, flags);
+	}
+	spin_unlock_irqrestore(&gpio_lock, flags);
+
+
+	return status;
+}
+postcore_initcall(gpiolib_sysfs_init);
+
+#else
+static inline int gpiochip_export(struct gpio_chip *chip)
+{
+	return 0;
+}
+
+static inline void gpiochip_unexport(struct gpio_chip *chip)
+{
+}
+
+#endif /* CONFIG_GPIO_SYSFS */
+
 /**
  * gpiochip_add() - register a gpio_chip
  * @chip: the chip to register, with chip->base initialized
@@ -160,6 +641,11 @@ err:
  * because the chip->base is invalid or already associated with a
  * different chip.  Otherwise it returns zero as a success code.
  *
+ * When gpiochip_add() is called very early during boot, so that GPIOs
+ * can be freely used, the chip->dev device must be registered before
+ * the gpio framework's arch_initcall().  Otherwise sysfs initialization
+ * for GPIOs will fail rudely.
+ *
  * If chip->base is negative, this requests dynamic assignment of
  * a range of valid GPIOs.
  */
@@ -182,7 +668,7 @@ int gpiochip_add(struct gpio_chip *chip)
 		base = gpiochip_find_base(chip->ngpio);
 		if (base < 0) {
 			status = base;
-			goto fail_unlock;
+			goto unlock;
 		}
 		chip->base = base;
 	}
@@ -197,12 +683,23 @@ int gpiochip_add(struct gpio_chip *chip)
 	if (status == 0) {
 		for (id = base; id < base + chip->ngpio; id++) {
 			gpio_desc[id].chip = chip;
-			gpio_desc[id].flags = 0;
+
+			/* REVISIT:  most hardware initializes GPIOs as
+			 * inputs (often with pullups enabled) so power
+			 * usage is minimized.  Linux code should set the
+			 * gpio direction first thing; but until it does,
+			 * we may expose the wrong direction in sysfs.
+			 */
+			gpio_desc[id].flags = !chip->direction_input
+				? (1 << FLAG_IS_OUT)
+				: 0;
 		}
 	}
 
-fail_unlock:
+unlock:
 	spin_unlock_irqrestore(&gpio_lock, flags);
+	if (status == 0)
+		status = gpiochip_export(chip);
 fail:
 	/* failures here can mean systems won't boot... */
 	if (status)
@@ -239,6 +736,10 @@ int gpiochip_remove(struct gpio_chip *chip)
 	}
 
 	spin_unlock_irqrestore(&gpio_lock, flags);
+
+	if (status == 0)
+		gpiochip_unexport(chip);
+
 	return status;
 }
 EXPORT_SYMBOL_GPL(gpiochip_remove);
@@ -296,6 +797,8 @@ void gpio_free(unsigned gpio)
 		return;
 	}
 
+	gpio_unexport(gpio);
+
 	spin_lock_irqsave(&gpio_lock, flags);
 
 	desc = &gpio_desc[gpio];
@@ -534,10 +1037,6 @@ EXPORT_SYMBOL_GPL(gpio_set_value_cansleep);
 
 #ifdef CONFIG_DEBUG_FS
 
-#include <linux/debugfs.h>
-#include <linux/seq_file.h>
-
-
 static void gpiolib_dbg_show(struct seq_file *s, struct gpio_chip *chip)
 {
 	unsigned		i;
@@ -614,17 +1113,28 @@ static int gpiolib_show(struct seq_file *s, void *unused)
 	/* REVISIT this isn't locked against gpio_chip removal ... */
 
 	for (gpio = 0; gpio_is_valid(gpio); gpio++) {
+		struct device *dev;
+
 		if (chip == gpio_desc[gpio].chip)
 			continue;
 		chip = gpio_desc[gpio].chip;
 		if (!chip)
 			continue;
 
-		seq_printf(s, "%sGPIOs %d-%d, %s%s:\n",
+		seq_printf(s, "%sGPIOs %d-%d",
 				started ? "\n" : "",
-				chip->base, chip->base + chip->ngpio - 1,
-				chip->label ? : "generic",
-				chip->can_sleep ? ", can sleep" : "");
+				chip->base, chip->base + chip->ngpio - 1);
+		dev = chip->dev;
+		if (dev)
+			seq_printf(s, ", %s/%s",
+				dev->bus ? dev->bus->name : "no-bus",
+				dev->bus_id);
+		if (chip->label)
+			seq_printf(s, ", %s", chip->label);
+		if (chip->can_sleep)
+			seq_printf(s, ", can sleep");
+		seq_printf(s, ":\n");
+
 		started = 1;
 		if (chip->dbg_show)
 			chip->dbg_show(s, chip);
diff --git a/drivers/gpio/max732x.c b/drivers/gpio/max732x.c
new file mode 100644
index 000000000000..b51c8135ca28
--- /dev/null
+++ b/drivers/gpio/max732x.c
@@ -0,0 +1,385 @@
+/*
+ *  max732x.c - I2C Port Expander with 8/16 I/O
+ *
+ *  Copyright (C) 2007 Marvell International Ltd.
+ *  Copyright (C) 2008 Jack Ren <jack.ren@marvell.com>
+ *  Copyright (C) 2008 Eric Miao <eric.miao@marvell.com>
+ *
+ *  Derived from drivers/gpio/pca953x.c
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; version 2 of the License.
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/string.h>
+#include <linux/gpio.h>
+
+#include <linux/i2c.h>
+#include <linux/i2c/max732x.h>
+
+
+/*
+ * Each port of MAX732x (including MAX7319) falls into one of the
+ * following three types:
+ *
+ *   - Push Pull Output
+ *   - Input
+ *   - Open Drain I/O
+ *
+ * designated by 'O', 'I' and 'P' individually according to MAXIM's
+ * datasheets.
+ *
+ * There are two groups of I/O ports, each group usually includes
+ * up to 8 I/O ports, and is accessed by a specific I2C address:
+ *
+ *   - Group A : by I2C address 0b'110xxxx
+ *   - Group B : by I2C address 0b'101xxxx
+ *
+ * where 'xxxx' is decided by the connections of pin AD2/AD0.  The
+ * address used also affects the initial state of output signals.
+ *
+ * Within each group of ports, there are five known combinations of
+ * I/O ports: 4I4O, 4P4O, 8I, 8P, 8O, see the definitions below for
+ * the detailed organization of these ports.
+ *
+ * GPIO numbers start from 'gpio_base + 0' to 'gpio_base + 8/16',
+ * and GPIOs from GROUP_A are numbered before those from GROUP_B
+ * (if there are two groups).
+ *
+ * NOTE: MAX7328/MAX7329 are drop-in replacements for PCF8574/a, so
+ * they are not supported by this driver.
+ */
+
+#define PORT_NONE	0x0	/* '/' No Port */
+#define PORT_OUTPUT	0x1	/* 'O' Push-Pull, Output Only */
+#define PORT_INPUT	0x2	/* 'I' Input Only */
+#define PORT_OPENDRAIN	0x3	/* 'P' Open-Drain, I/O */
+
+#define IO_4I4O		0x5AA5	/* O7 O6 I5 I4 I3 I2 O1 O0 */
+#define IO_4P4O		0x5FF5	/* O7 O6 P5 P4 P3 P2 O1 O0 */
+#define IO_8I		0xAAAA	/* I7 I6 I5 I4 I3 I2 I1 I0 */
+#define IO_8P		0xFFFF	/* P7 P6 P5 P4 P3 P2 P1 P0 */
+#define IO_8O		0x5555	/* O7 O6 O5 O4 O3 O2 O1 O0 */
+
+#define GROUP_A(x)	((x) & 0xffff)	/* I2C Addr: 0b'110xxxx */
+#define GROUP_B(x)	((x) << 16)	/* I2C Addr: 0b'101xxxx */
+
+static const struct i2c_device_id max732x_id[] = {
+	{ "max7319", GROUP_A(IO_8I) },
+	{ "max7320", GROUP_B(IO_8O) },
+	{ "max7321", GROUP_A(IO_8P) },
+	{ "max7322", GROUP_A(IO_4I4O) },
+	{ "max7323", GROUP_A(IO_4P4O) },
+	{ "max7324", GROUP_A(IO_8I) | GROUP_B(IO_8O) },
+	{ "max7325", GROUP_A(IO_8P) | GROUP_B(IO_8O) },
+	{ "max7326", GROUP_A(IO_4I4O) | GROUP_B(IO_8O) },
+	{ "max7327", GROUP_A(IO_4P4O) | GROUP_B(IO_8O) },
+	{ },
+};
+MODULE_DEVICE_TABLE(i2c, max732x_id);
+
+struct max732x_chip {
+	struct gpio_chip gpio_chip;
+
+	struct i2c_client *client;	/* "main" client */
+	struct i2c_client *client_dummy;
+	struct i2c_client *client_group_a;
+	struct i2c_client *client_group_b;
+
+	unsigned int	mask_group_a;
+	unsigned int	dir_input;
+	unsigned int	dir_output;
+
+	struct mutex	lock;
+	uint8_t		reg_out[2];
+};
+
+static int max732x_write(struct max732x_chip *chip, int group_a, uint8_t val)
+{
+	struct i2c_client *client;
+	int ret;
+
+	client = group_a ? chip->client_group_a : chip->client_group_b;
+	ret = i2c_smbus_write_byte(client, val);
+	if (ret < 0) {
+		dev_err(&client->dev, "failed writing\n");
+		return ret;
+	}
+
+	return 0;
+}
+
+static int max732x_read(struct max732x_chip *chip, int group_a, uint8_t *val)
+{
+	struct i2c_client *client;
+	int ret;
+
+	client = group_a ? chip->client_group_a : chip->client_group_b;
+	ret = i2c_smbus_read_byte(client);
+	if (ret < 0) {
+		dev_err(&client->dev, "failed reading\n");
+		return ret;
+	}
+
+	*val = (uint8_t)ret;
+	return 0;
+}
+
+static inline int is_group_a(struct max732x_chip *chip, unsigned off)
+{
+	return (1u << off) & chip->mask_group_a;
+}
+
+static int max732x_gpio_get_value(struct gpio_chip *gc, unsigned off)
+{
+	struct max732x_chip *chip;
+	uint8_t reg_val;
+	int ret;
+
+	chip = container_of(gc, struct max732x_chip, gpio_chip);
+
+	ret = max732x_read(chip, is_group_a(chip, off), &reg_val);
+	if (ret < 0)
+		return 0;
+
+	return reg_val & (1u << (off & 0x7));
+}
+
+static void max732x_gpio_set_value(struct gpio_chip *gc, unsigned off, int val)
+{
+	struct max732x_chip *chip;
+	uint8_t reg_out, mask = 1u << (off & 0x7);
+	int ret;
+
+	chip = container_of(gc, struct max732x_chip, gpio_chip);
+
+	mutex_lock(&chip->lock);
+
+	reg_out = (off > 7) ? chip->reg_out[1] : chip->reg_out[0];
+	reg_out = (val) ? reg_out | mask : reg_out & ~mask;
+
+	ret = max732x_write(chip, is_group_a(chip, off), reg_out);
+	if (ret < 0)
+		goto out;
+
+	/* update the shadow register then */
+	if (off > 7)
+		chip->reg_out[1] = reg_out;
+	else
+		chip->reg_out[0] = reg_out;
+out:
+	mutex_unlock(&chip->lock);
+}
+
+static int max732x_gpio_direction_input(struct gpio_chip *gc, unsigned off)
+{
+	struct max732x_chip *chip;
+	unsigned int mask = 1u << off;
+
+	chip = container_of(gc, struct max732x_chip, gpio_chip);
+
+	if ((mask & chip->dir_input) == 0) {
+		dev_dbg(&chip->client->dev, "%s port %d is output only\n",
+			chip->client->name, off);
+		return -EACCES;
+	}
+
+	return 0;
+}
+
+static int max732x_gpio_direction_output(struct gpio_chip *gc,
+		unsigned off, int val)
+{
+	struct max732x_chip *chip;
+	unsigned int mask = 1u << off;
+
+	chip = container_of(gc, struct max732x_chip, gpio_chip);
+
+	if ((mask & chip->dir_output) == 0) {
+		dev_dbg(&chip->client->dev, "%s port %d is input only\n",
+			chip->client->name, off);
+		return -EACCES;
+	}
+
+	max732x_gpio_set_value(gc, off, val);
+	return 0;
+}
+
+static int __devinit max732x_setup_gpio(struct max732x_chip *chip,
+					const struct i2c_device_id *id,
+					unsigned gpio_start)
+{
+	struct gpio_chip *gc = &chip->gpio_chip;
+	uint32_t id_data = id->driver_data;
+	int i, port = 0;
+
+	for (i = 0; i < 16; i++, id_data >>= 2) {
+		unsigned int mask = 1 << port;
+
+		switch (id_data & 0x3) {
+		case PORT_OUTPUT:
+			chip->dir_output |= mask;
+			break;
+		case PORT_INPUT:
+			chip->dir_input |= mask;
+			break;
+		case PORT_OPENDRAIN:
+			chip->dir_output |= mask;
+			chip->dir_input |= mask;
+			break;
+		default:
+			continue;
+		}
+
+		if (i < 8)
+			chip->mask_group_a |= mask;
+		port++;
+	}
+
+	if (chip->dir_input)
+		gc->direction_input = max732x_gpio_direction_input;
+	if (chip->dir_output) {
+		gc->direction_output = max732x_gpio_direction_output;
+		gc->set = max732x_gpio_set_value;
+	}
+	gc->get = max732x_gpio_get_value;
+	gc->can_sleep = 1;
+
+	gc->base = gpio_start;
+	gc->ngpio = port;
+	gc->label = chip->client->name;
+	gc->owner = THIS_MODULE;
+
+	return port;
+}
+
+static int __devinit max732x_probe(struct i2c_client *client,
+				   const struct i2c_device_id *id)
+{
+	struct max732x_platform_data *pdata;
+	struct max732x_chip *chip;
+	struct i2c_client *c;
+	uint16_t addr_a, addr_b;
+	int ret, nr_port;
+
+	pdata = client->dev.platform_data;
+	if (pdata == NULL)
+		return -ENODEV;
+
+	chip = kzalloc(sizeof(struct max732x_chip), GFP_KERNEL);
+	if (chip == NULL)
+		return -ENOMEM;
+	chip->client = client;
+
+	nr_port = max732x_setup_gpio(chip, id, pdata->gpio_base);
+
+	addr_a = (client->addr & 0x0f) | 0x60;
+	addr_b = (client->addr & 0x0f) | 0x50;
+
+	switch (client->addr & 0x70) {
+	case 0x60:
+		chip->client_group_a = client;
+		if (nr_port > 7) {
+			c = i2c_new_dummy(client->adapter, addr_b);
+			chip->client_group_b = chip->client_dummy = c;
+		}
+		break;
+	case 0x50:
+		chip->client_group_b = client;
+		if (nr_port > 7) {
+			c = i2c_new_dummy(client->adapter, addr_a);
+			chip->client_group_a = chip->client_dummy = c;
+		}
+		break;
+	default:
+		dev_err(&client->dev, "invalid I2C address specified %02x\n",
+				client->addr);
+		ret = -EINVAL;
+		goto out_failed;
+	}
+
+	mutex_init(&chip->lock);
+
+	max732x_read(chip, is_group_a(chip, 0), &chip->reg_out[0]);
+	if (nr_port > 7)
+		max732x_read(chip, is_group_a(chip, 8), &chip->reg_out[1]);
+
+	ret = gpiochip_add(&chip->gpio_chip);
+	if (ret)
+		goto out_failed;
+
+	if (pdata->setup) {
+		ret = pdata->setup(client, chip->gpio_chip.base,
+				chip->gpio_chip.ngpio, pdata->context);
+		if (ret < 0)
+			dev_warn(&client->dev, "setup failed, %d\n", ret);
+	}
+
+	i2c_set_clientdata(client, chip);
+	return 0;
+
+out_failed:
+	kfree(chip);
+	return ret;
+}
+
+static int __devexit max732x_remove(struct i2c_client *client)
+{
+	struct max732x_platform_data *pdata = client->dev.platform_data;
+	struct max732x_chip *chip = i2c_get_clientdata(client);
+	int ret;
+
+	if (pdata->teardown) {
+		ret = pdata->teardown(client, chip->gpio_chip.base,
+				chip->gpio_chip.ngpio, pdata->context);
+		if (ret < 0) {
+			dev_err(&client->dev, "%s failed, %d\n",
+					"teardown", ret);
+			return ret;
+		}
+	}
+
+	ret = gpiochip_remove(&chip->gpio_chip);
+	if (ret) {
+		dev_err(&client->dev, "%s failed, %d\n",
+				"gpiochip_remove()", ret);
+		return ret;
+	}
+
+	/* unregister any dummy i2c_client */
+	if (chip->client_dummy)
+		i2c_unregister_device(chip->client_dummy);
+
+	kfree(chip);
+	return 0;
+}
+
+static struct i2c_driver max732x_driver = {
+	.driver = {
+		.name	= "max732x",
+		.owner	= THIS_MODULE,
+	},
+	.probe		= max732x_probe,
+	.remove		= __devexit_p(max732x_remove),
+	.id_table	= max732x_id,
+};
+
+static int __init max732x_init(void)
+{
+	return i2c_add_driver(&max732x_driver);
+}
+module_init(max732x_init);
+
+static void __exit max732x_exit(void)
+{
+	i2c_del_driver(&max732x_driver);
+}
+module_exit(max732x_exit);
+
+MODULE_AUTHOR("Eric Miao <eric.miao@marvell.com>");
+MODULE_DESCRIPTION("GPIO expander driver for MAX732X");
+MODULE_LICENSE("GPL");
diff --git a/drivers/gpio/mcp23s08.c b/drivers/gpio/mcp23s08.c
index 7f92fdd5f0e2..8a1b405fefda 100644
--- a/drivers/gpio/mcp23s08.c
+++ b/drivers/gpio/mcp23s08.c
@@ -40,15 +40,26 @@ struct mcp23s08 {
 	struct spi_device	*spi;
 	u8			addr;
 
+	u8			cache[11];
 	/* lock protects the cached values */
 	struct mutex		lock;
-	u8			cache[11];
 
 	struct gpio_chip	chip;
 
 	struct work_struct	work;
 };
 
+/* A given spi_device can represent up to four mcp23s08 chips
+ * sharing the same chipselect but using different addresses
+ * (e.g. chips #0 and #3 might be populated, but not #1 or $2).
+ * Driver data holds all the per-chip data.
+ */
+struct mcp23s08_driver_data {
+	unsigned		ngpio;
+	struct mcp23s08		*mcp[4];
+	struct mcp23s08		chip[];
+};
+
 static int mcp23s08_read(struct mcp23s08 *mcp, unsigned reg)
 {
 	u8	tx[2], rx[1];
@@ -208,25 +219,18 @@ done:
 
 /*----------------------------------------------------------------------*/
 
-static int mcp23s08_probe(struct spi_device *spi)
+static int mcp23s08_probe_one(struct spi_device *spi, unsigned addr,
+		unsigned base, unsigned pullups)
 {
-	struct mcp23s08			*mcp;
-	struct mcp23s08_platform_data	*pdata;
+	struct mcp23s08_driver_data	*data = spi_get_drvdata(spi);
+	struct mcp23s08			*mcp = data->mcp[addr];
 	int				status;
 	int				do_update = 0;
 
-	pdata = spi->dev.platform_data;
-	if (!pdata || pdata->slave > 3 || !pdata->base)
-		return -ENODEV;
-
-	mcp = kzalloc(sizeof *mcp, GFP_KERNEL);
-	if (!mcp)
-		return -ENOMEM;
-
 	mutex_init(&mcp->lock);
 
 	mcp->spi = spi;
-	mcp->addr = 0x40 | (pdata->slave << 1);
+	mcp->addr = 0x40 | (addr << 1);
 
 	mcp->chip.label = "mcp23s08",
 
@@ -236,26 +240,28 @@ static int mcp23s08_probe(struct spi_device *spi)
 	mcp->chip.set = mcp23s08_set;
 	mcp->chip.dbg_show = mcp23s08_dbg_show;
 
-	mcp->chip.base = pdata->base;
+	mcp->chip.base = base;
 	mcp->chip.ngpio = 8;
 	mcp->chip.can_sleep = 1;
+	mcp->chip.dev = &spi->dev;
 	mcp->chip.owner = THIS_MODULE;
 
-	spi_set_drvdata(spi, mcp);
-
-	/* verify MCP_IOCON.SEQOP = 0, so sequential reads work */
+	/* verify MCP_IOCON.SEQOP = 0, so sequential reads work,
+	 * and MCP_IOCON.HAEN = 1, so we work with all chips.
+	 */
 	status = mcp23s08_read(mcp, MCP_IOCON);
 	if (status < 0)
 		goto fail;
-	if (status & IOCON_SEQOP) {
+	if ((status & IOCON_SEQOP) || !(status & IOCON_HAEN)) {
 		status &= ~IOCON_SEQOP;
+		status |= IOCON_HAEN;
 		status = mcp23s08_write(mcp, MCP_IOCON, (u8) status);
 		if (status < 0)
 			goto fail;
 	}
 
 	/* configure ~100K pullups */
-	status = mcp23s08_write(mcp, MCP_GPPU, pdata->pullups);
+	status = mcp23s08_write(mcp, MCP_GPPU, pullups);
 	if (status < 0)
 		goto fail;
 
@@ -282,11 +288,58 @@ static int mcp23s08_probe(struct spi_device *spi)
 		tx[1] = MCP_IPOL;
 		memcpy(&tx[2], &mcp->cache[MCP_IPOL], sizeof(tx) - 2);
 		status = spi_write_then_read(mcp->spi, tx, sizeof tx, NULL, 0);
-
-		/* FIXME check status... */
+		if (status < 0)
+			goto fail;
 	}
 
 	status = gpiochip_add(&mcp->chip);
+fail:
+	if (status < 0)
+		dev_dbg(&spi->dev, "can't setup chip %d, --> %d\n",
+				addr, status);
+	return status;
+}
+
+static int mcp23s08_probe(struct spi_device *spi)
+{
+	struct mcp23s08_platform_data	*pdata;
+	unsigned			addr;
+	unsigned			chips = 0;
+	struct mcp23s08_driver_data	*data;
+	int				status;
+	unsigned			base;
+
+	pdata = spi->dev.platform_data;
+	if (!pdata || !gpio_is_valid(pdata->base))
+		return -ENODEV;
+
+	for (addr = 0; addr < 4; addr++) {
+		if (!pdata->chip[addr].is_present)
+			continue;
+		chips++;
+	}
+	if (!chips)
+		return -ENODEV;
+
+	data = kzalloc(sizeof *data + chips * sizeof(struct mcp23s08),
+			GFP_KERNEL);
+	if (!data)
+		return -ENOMEM;
+	spi_set_drvdata(spi, data);
+
+	base = pdata->base;
+	for (addr = 0; addr < 4; addr++) {
+		if (!pdata->chip[addr].is_present)
+			continue;
+		chips--;
+		data->mcp[addr] = &data->chip[chips];
+		status = mcp23s08_probe_one(spi, addr, base,
+				pdata->chip[addr].pullups);
+		if (status < 0)
+			goto fail;
+		base += 8;
+	}
+	data->ngpio = base - pdata->base;
 
 	/* NOTE:  these chips have a relatively sane IRQ framework, with
 	 * per-signal masking and level/edge triggering.  It's not yet
@@ -294,8 +347,9 @@ static int mcp23s08_probe(struct spi_device *spi)
 	 */
 
 	if (pdata->setup) {
-		status = pdata->setup(spi, mcp->chip.base,
-				mcp->chip.ngpio, pdata->context);
+		status = pdata->setup(spi,
+				pdata->base, data->ngpio,
+				pdata->context);
 		if (status < 0)
 			dev_dbg(&spi->dev, "setup --> %d\n", status);
 	}
@@ -303,19 +357,29 @@ static int mcp23s08_probe(struct spi_device *spi)
 	return 0;
 
 fail:
-	kfree(mcp);
+	for (addr = 0; addr < 4; addr++) {
+		int tmp;
+
+		if (!data->mcp[addr])
+			continue;
+		tmp = gpiochip_remove(&data->mcp[addr]->chip);
+		if (tmp < 0)
+			dev_err(&spi->dev, "%s --> %d\n", "remove", tmp);
+	}
+	kfree(data);
 	return status;
 }
 
 static int mcp23s08_remove(struct spi_device *spi)
 {
-	struct mcp23s08			*mcp = spi_get_drvdata(spi);
+	struct mcp23s08_driver_data	*data = spi_get_drvdata(spi);
 	struct mcp23s08_platform_data	*pdata = spi->dev.platform_data;
+	unsigned			addr;
 	int				status = 0;
 
 	if (pdata->teardown) {
 		status = pdata->teardown(spi,
-				mcp->chip.base, mcp->chip.ngpio,
+				pdata->base, data->ngpio,
 				pdata->context);
 		if (status < 0) {
 			dev_err(&spi->dev, "%s --> %d\n", "teardown", status);
@@ -323,11 +387,20 @@ static int mcp23s08_remove(struct spi_device *spi)
 		}
 	}
 
-	status = gpiochip_remove(&mcp->chip);
+	for (addr = 0; addr < 4; addr++) {
+		int tmp;
+
+		if (!data->mcp[addr])
+			continue;
+
+		tmp = gpiochip_remove(&data->mcp[addr]->chip);
+		if (tmp < 0) {
+			dev_err(&spi->dev, "%s --> %d\n", "remove", tmp);
+			status = tmp;
+		}
+	}
 	if (status == 0)
-		kfree(mcp);
-	else
-		dev_err(&spi->dev, "%s --> %d\n", "remove", status);
+		kfree(data);
 	return status;
 }
 
@@ -355,4 +428,3 @@ static void __exit mcp23s08_exit(void)
 module_exit(mcp23s08_exit);
 
 MODULE_LICENSE("GPL");
-
diff --git a/drivers/gpio/pca953x.c b/drivers/gpio/pca953x.c
index a380730b61ab..cc8468692ae0 100644
--- a/drivers/gpio/pca953x.c
+++ b/drivers/gpio/pca953x.c
@@ -188,6 +188,7 @@ static void pca953x_setup_gpio(struct pca953x_chip *chip, int gpios)
 	gc->base = chip->gpio_start;
 	gc->ngpio = gpios;
 	gc->label = chip->client->name;
+	gc->dev = &chip->client->dev;
 	gc->owner = THIS_MODULE;
 }
 
diff --git a/drivers/gpio/pcf857x.c b/drivers/gpio/pcf857x.c
index d25d356c4f20..fc9c6ae739ee 100644
--- a/drivers/gpio/pcf857x.c
+++ b/drivers/gpio/pcf857x.c
@@ -200,6 +200,7 @@ static int pcf857x_probe(struct i2c_client *client,
 
 	gpio->chip.base = pdata->gpio_base;
 	gpio->chip.can_sleep = 1;
+	gpio->chip.dev = &client->dev;
 	gpio->chip.owner = THIS_MODULE;
 
 	/* NOTE:  the OnSemi jlc1562b is also largely compatible with
diff --git a/drivers/gpu/drm/drm_drv.c b/drivers/gpu/drm/drm_drv.c
index 564138714bb5..452c2d866ec5 100644
--- a/drivers/gpu/drm/drm_drv.c
+++ b/drivers/gpu/drm/drm_drv.c
@@ -318,7 +318,7 @@ static void drm_cleanup(struct drm_device * dev)
 		DRM_ERROR("Cannot unload module\n");
 }
 
-int drm_minors_cleanup(int id, void *ptr, void *data)
+static int drm_minors_cleanup(int id, void *ptr, void *data)
 {
 	struct drm_minor *minor = ptr;
 	struct drm_device *dev;
diff --git a/drivers/gpu/drm/drm_irq.c b/drivers/gpu/drm/drm_irq.c
index 089c015c01d1..53f0e5af1cc8 100644
--- a/drivers/gpu/drm/drm_irq.c
+++ b/drivers/gpu/drm/drm_irq.c
@@ -400,27 +400,31 @@ static void drm_locked_tasklet_func(unsigned long data)
 {
 	struct drm_device *dev = (struct drm_device *)data;
 	unsigned long irqflags;
-
+	void (*tasklet_func)(struct drm_device *);
+	
 	spin_lock_irqsave(&dev->tasklet_lock, irqflags);
+	tasklet_func = dev->locked_tasklet_func;
+	spin_unlock_irqrestore(&dev->tasklet_lock, irqflags);
 
-	if (!dev->locked_tasklet_func ||
+	if (!tasklet_func ||
 	    !drm_lock_take(&dev->lock,
 			   DRM_KERNEL_CONTEXT)) {
-		spin_unlock_irqrestore(&dev->tasklet_lock, irqflags);
 		return;
 	}
 
 	dev->lock.lock_time = jiffies;
 	atomic_inc(&dev->counts[_DRM_STAT_LOCKS]);
 
-	dev->locked_tasklet_func(dev);
+	spin_lock_irqsave(&dev->tasklet_lock, irqflags);
+	tasklet_func = dev->locked_tasklet_func;
+	dev->locked_tasklet_func = NULL;
+	spin_unlock_irqrestore(&dev->tasklet_lock, irqflags);
+	
+	if (tasklet_func != NULL)
+		tasklet_func(dev);
 
 	drm_lock_free(&dev->lock,
 		      DRM_KERNEL_CONTEXT);
-
-	dev->locked_tasklet_func = NULL;
-
-	spin_unlock_irqrestore(&dev->tasklet_lock, irqflags);
 }
 
 /**
diff --git a/drivers/gpu/drm/drm_lock.c b/drivers/gpu/drm/drm_lock.c
index 0998723cde79..a4caf95485d7 100644
--- a/drivers/gpu/drm/drm_lock.c
+++ b/drivers/gpu/drm/drm_lock.c
@@ -105,14 +105,19 @@ int drm_lock(struct drm_device *dev, void *data, struct drm_file *file_priv)
 		  ret ? "interrupted" : "has lock");
 	if (ret) return ret;
 
-	sigemptyset(&dev->sigmask);
-	sigaddset(&dev->sigmask, SIGSTOP);
-	sigaddset(&dev->sigmask, SIGTSTP);
-	sigaddset(&dev->sigmask, SIGTTIN);
-	sigaddset(&dev->sigmask, SIGTTOU);
-	dev->sigdata.context = lock->context;
-	dev->sigdata.lock = dev->lock.hw_lock;
-	block_all_signals(drm_notifier, &dev->sigdata, &dev->sigmask);
+	/* don't set the block all signals on the master process for now 
+	 * really probably not the correct answer but lets us debug xkb
+ 	 * xserver for now */
+	if (!file_priv->master) {
+		sigemptyset(&dev->sigmask);
+		sigaddset(&dev->sigmask, SIGSTOP);
+		sigaddset(&dev->sigmask, SIGTSTP);
+		sigaddset(&dev->sigmask, SIGTTIN);
+		sigaddset(&dev->sigmask, SIGTTOU);
+		dev->sigdata.context = lock->context;
+		dev->sigdata.lock = dev->lock.hw_lock;
+		block_all_signals(drm_notifier, &dev->sigdata, &dev->sigmask);
+	}
 
 	if (dev->driver->dma_ready && (lock->flags & _DRM_LOCK_READY))
 		dev->driver->dma_ready(dev);
@@ -150,6 +155,7 @@ int drm_unlock(struct drm_device *dev, void *data, struct drm_file *file_priv)
 {
 	struct drm_lock *lock = data;
 	unsigned long irqflags;
+	void (*tasklet_func)(struct drm_device *);
 
 	if (lock->context == DRM_KERNEL_CONTEXT) {
 		DRM_ERROR("Process %d using kernel context %d\n",
@@ -158,14 +164,11 @@ int drm_unlock(struct drm_device *dev, void *data, struct drm_file *file_priv)
 	}
 
 	spin_lock_irqsave(&dev->tasklet_lock, irqflags);
-
-	if (dev->locked_tasklet_func) {
-		dev->locked_tasklet_func(dev);
-
-		dev->locked_tasklet_func = NULL;
-	}
-
+	tasklet_func = dev->locked_tasklet_func;
+	dev->locked_tasklet_func = NULL;
 	spin_unlock_irqrestore(&dev->tasklet_lock, irqflags);
+	if (tasklet_func != NULL)
+		tasklet_func(dev);
 
 	atomic_inc(&dev->counts[_DRM_STAT_UNLOCKS]);
 
diff --git a/drivers/gpu/drm/radeon/r300_cmdbuf.c b/drivers/gpu/drm/radeon/r300_cmdbuf.c
index 702df45320f7..4b27d9abb7bc 100644
--- a/drivers/gpu/drm/radeon/r300_cmdbuf.c
+++ b/drivers/gpu/drm/radeon/r300_cmdbuf.c
@@ -77,6 +77,9 @@ static int r300_emit_cliprects(drm_radeon_private_t *dev_priv,
 				return -EFAULT;
 			}
 
+			box.x2--; /* Hardware expects inclusive bottom-right corner */
+			box.y2--;
+
 			if ((dev_priv->flags & RADEON_FAMILY_MASK) >= CHIP_RV515) {
 				box.x1 = (box.x1) &
 					R300_CLIPRECT_MASK;
@@ -95,8 +98,8 @@ static int r300_emit_cliprects(drm_radeon_private_t *dev_priv,
 					R300_CLIPRECT_MASK;
 				box.y2 = (box.y2 + R300_CLIPRECT_OFFSET) &
 					R300_CLIPRECT_MASK;
-
 			}
+
 			OUT_RING((box.x1 << R300_CLIPRECT_X_SHIFT) |
 				 (box.y1 << R300_CLIPRECT_Y_SHIFT));
 			OUT_RING((box.x2 << R300_CLIPRECT_X_SHIFT) |
@@ -136,6 +139,18 @@ static int r300_emit_cliprects(drm_radeon_private_t *dev_priv,
 		ADVANCE_RING();
 	}
 
+	/* flus cache and wait idle clean after cliprect change */
+	BEGIN_RING(2);
+	OUT_RING(CP_PACKET0(R300_RB3D_DSTCACHE_CTLSTAT, 0));
+	OUT_RING(R300_RB3D_DC_FLUSH);
+	ADVANCE_RING();
+	BEGIN_RING(2);
+	OUT_RING(CP_PACKET0(RADEON_WAIT_UNTIL, 0));
+	OUT_RING(RADEON_WAIT_3D_IDLECLEAN);
+	ADVANCE_RING();
+	/* set flush flag */
+	dev_priv->track_flush |= RADEON_FLUSH_EMITED;
+
 	return 0;
 }
 
@@ -166,13 +181,13 @@ void r300_init_reg_flags(struct drm_device *dev)
 	ADD_RANGE(0x21DC, 1);
 	ADD_RANGE(R300_VAP_UNKNOWN_221C, 1);
 	ADD_RANGE(R300_VAP_CLIP_X_0, 4);
-	ADD_RANGE(R300_VAP_PVS_WAITIDLE, 1);
+	ADD_RANGE(R300_VAP_PVS_STATE_FLUSH_REG, 1);
 	ADD_RANGE(R300_VAP_UNKNOWN_2288, 1);
 	ADD_RANGE(R300_VAP_OUTPUT_VTX_FMT_0, 2);
 	ADD_RANGE(R300_VAP_PVS_CNTL_1, 3);
 	ADD_RANGE(R300_GB_ENABLE, 1);
 	ADD_RANGE(R300_GB_MSPOS0, 5);
-	ADD_RANGE(R300_TX_CNTL, 1);
+	ADD_RANGE(R300_TX_INVALTAGS, 1);
 	ADD_RANGE(R300_TX_ENABLE, 1);
 	ADD_RANGE(0x4200, 4);
 	ADD_RANGE(0x4214, 1);
@@ -388,15 +403,28 @@ static __inline__ int r300_emit_vpu(drm_radeon_private_t *dev_priv,
 	if (sz * 16 > cmdbuf->bufsz)
 		return -EINVAL;
 
-	BEGIN_RING(5 + sz * 4);
-	/* Wait for VAP to come to senses.. */
-	/* there is no need to emit it multiple times, (only once before VAP is programmed,
-	   but this optimization is for later */
-	OUT_RING_REG(R300_VAP_PVS_WAITIDLE, 0);
+	/* VAP is very sensitive so we purge cache before we program it
+	 * and we also flush its state before & after */
+	BEGIN_RING(6);
+	OUT_RING(CP_PACKET0(R300_RB3D_DSTCACHE_CTLSTAT, 0));
+	OUT_RING(R300_RB3D_DC_FLUSH);
+	OUT_RING(CP_PACKET0(RADEON_WAIT_UNTIL, 0));
+	OUT_RING(RADEON_WAIT_3D_IDLECLEAN);
+	OUT_RING(CP_PACKET0(R300_VAP_PVS_STATE_FLUSH_REG, 0));
+	OUT_RING(0);
+	ADVANCE_RING();
+	/* set flush flag */
+	dev_priv->track_flush |= RADEON_FLUSH_EMITED;
+
+	BEGIN_RING(3 + sz * 4);
 	OUT_RING_REG(R300_VAP_PVS_UPLOAD_ADDRESS, addr);
 	OUT_RING(CP_PACKET0_TABLE(R300_VAP_PVS_UPLOAD_DATA, sz * 4 - 1));
 	OUT_RING_TABLE((int *)cmdbuf->buf, sz * 4);
+	ADVANCE_RING();
 
+	BEGIN_RING(2);
+	OUT_RING(CP_PACKET0(R300_VAP_PVS_STATE_FLUSH_REG, 0));
+	OUT_RING(0);
 	ADVANCE_RING();
 
 	cmdbuf->buf += sz * 16;
@@ -424,6 +452,15 @@ static __inline__ int r300_emit_clear(drm_radeon_private_t *dev_priv,
 	OUT_RING_TABLE((int *)cmdbuf->buf, 8);
 	ADVANCE_RING();
 
+	BEGIN_RING(4);
+	OUT_RING(CP_PACKET0(R300_RB3D_DSTCACHE_CTLSTAT, 0));
+	OUT_RING(R300_RB3D_DC_FLUSH);
+	OUT_RING(CP_PACKET0(RADEON_WAIT_UNTIL, 0));
+	OUT_RING(RADEON_WAIT_3D_IDLECLEAN);
+	ADVANCE_RING();
+	/* set flush flag */
+	dev_priv->track_flush |= RADEON_FLUSH_EMITED;
+
 	cmdbuf->buf += 8 * 4;
 	cmdbuf->bufsz -= 8 * 4;
 
@@ -543,22 +580,23 @@ static __inline__ int r300_emit_bitblt_multi(drm_radeon_private_t *dev_priv,
 	return 0;
 }
 
-static __inline__ int r300_emit_indx_buffer(drm_radeon_private_t *dev_priv,
-					     drm_radeon_kcmd_buffer_t *cmdbuf)
+static __inline__ int r300_emit_draw_indx_2(drm_radeon_private_t *dev_priv,
+					    drm_radeon_kcmd_buffer_t *cmdbuf)
 {
-	u32 *cmd = (u32 *) cmdbuf->buf;
-	int count, ret;
+	u32 *cmd;
+	int count;
+	int expected_count;
 	RING_LOCALS;
 
-	count=(cmd[0]>>16) & 0x3fff;
+	cmd = (u32 *) cmdbuf->buf;
+	count = (cmd[0]>>16) & 0x3fff;
+	expected_count = cmd[1] >> 16;
+	if (!(cmd[1] & R300_VAP_VF_CNTL__INDEX_SIZE_32bit))
+		expected_count = (expected_count+1)/2;
 
-	if ((cmd[1] & 0x8000ffff) != 0x80000810) {
-		DRM_ERROR("Invalid indx_buffer reg address %08X\n", cmd[1]);
-		return -EINVAL;
-	}
-	ret = !radeon_check_offset(dev_priv, cmd[2]);
-	if (ret) {
-		DRM_ERROR("Invalid indx_buffer offset is %08X\n", cmd[2]);
+	if (count && count != expected_count) {
+		DRM_ERROR("3D_DRAW_INDX_2: packet size %i, expected %i\n",
+			count, expected_count);
 		return -EINVAL;
 	}
 
@@ -570,6 +608,50 @@ static __inline__ int r300_emit_indx_buffer(drm_radeon_private_t *dev_priv,
 	cmdbuf->buf += (count+2)*4;
 	cmdbuf->bufsz -= (count+2)*4;
 
+	if (!count) {
+		drm_r300_cmd_header_t header;
+
+		if (cmdbuf->bufsz < 4*4 + sizeof(header)) {
+			DRM_ERROR("3D_DRAW_INDX_2: expect subsequent INDX_BUFFER, but stream is too short.\n");
+			return -EINVAL;
+		}
+
+		header.u = *(unsigned int *)cmdbuf->buf;
+
+		cmdbuf->buf += sizeof(header);
+		cmdbuf->bufsz -= sizeof(header);
+		cmd = (u32 *) cmdbuf->buf;
+
+		if (header.header.cmd_type != R300_CMD_PACKET3 ||
+		    header.packet3.packet != R300_CMD_PACKET3_RAW ||
+		    cmd[0] != CP_PACKET3(RADEON_CP_INDX_BUFFER, 2)) {
+			DRM_ERROR("3D_DRAW_INDX_2: expect subsequent INDX_BUFFER.\n");
+			return -EINVAL;
+		}
+
+		if ((cmd[1] & 0x8000ffff) != 0x80000810) {
+			DRM_ERROR("Invalid indx_buffer reg address %08X\n", cmd[1]);
+			return -EINVAL;
+		}
+		if (!radeon_check_offset(dev_priv, cmd[2])) {
+			DRM_ERROR("Invalid indx_buffer offset is %08X\n", cmd[2]);
+			return -EINVAL;
+		}
+		if (cmd[3] != expected_count) {
+			DRM_ERROR("INDX_BUFFER: buffer size %i, expected %i\n",
+				cmd[3], expected_count);
+			return -EINVAL;
+		}
+
+		BEGIN_RING(4);
+		OUT_RING(cmd[0]);
+		OUT_RING_TABLE((int *)(cmdbuf->buf + 4), 3);
+		ADVANCE_RING();
+
+		cmdbuf->buf += 4*4;
+		cmdbuf->bufsz -= 4*4;
+	}
+
 	return 0;
 }
 
@@ -613,11 +695,22 @@ static __inline__ int r300_emit_raw_packet3(drm_radeon_private_t *dev_priv,
 	case RADEON_CNTL_BITBLT_MULTI:
 		return r300_emit_bitblt_multi(dev_priv, cmdbuf);
 
-	case RADEON_CP_INDX_BUFFER:	/* DRAW_INDX_2 without INDX_BUFFER seems to lock up the gpu */
-		return r300_emit_indx_buffer(dev_priv, cmdbuf);
-	case RADEON_CP_3D_DRAW_IMMD_2:	/* triggers drawing using in-packet vertex data */
-	case RADEON_CP_3D_DRAW_VBUF_2:	/* triggers drawing of vertex buffers setup elsewhere */
-	case RADEON_CP_3D_DRAW_INDX_2:	/* triggers drawing using indices to vertex buffer */
+	case RADEON_CP_INDX_BUFFER:
+		DRM_ERROR("packet3 INDX_BUFFER without preceding 3D_DRAW_INDX_2 is illegal.\n");
+		return -EINVAL;
+	case RADEON_CP_3D_DRAW_IMMD_2:
+		/* triggers drawing using in-packet vertex data */
+	case RADEON_CP_3D_DRAW_VBUF_2:
+		/* triggers drawing of vertex buffers setup elsewhere */
+		dev_priv->track_flush &= ~(RADEON_FLUSH_EMITED |
+					   RADEON_PURGE_EMITED);
+		break;
+	case RADEON_CP_3D_DRAW_INDX_2:
+		/* triggers drawing using indices to vertex buffer */
+		/* whenever we send vertex we clear flush & purge */
+		dev_priv->track_flush &= ~(RADEON_FLUSH_EMITED |
+					   RADEON_PURGE_EMITED);
+		return r300_emit_draw_indx_2(dev_priv, cmdbuf);
 	case RADEON_WAIT_FOR_IDLE:
 	case RADEON_CP_NOP:
 		/* these packets are safe */
@@ -713,17 +806,53 @@ static __inline__ int r300_emit_packet3(drm_radeon_private_t *dev_priv,
  */
 static __inline__ void r300_pacify(drm_radeon_private_t *dev_priv)
 {
+	uint32_t cache_z, cache_3d, cache_2d;
 	RING_LOCALS;
 
-	BEGIN_RING(6);
-	OUT_RING(CP_PACKET0(R300_RB3D_DSTCACHE_CTLSTAT, 0));
-	OUT_RING(R300_RB3D_DSTCACHE_UNKNOWN_0A);
+	cache_z = R300_ZC_FLUSH;
+	cache_2d = R300_RB2D_DC_FLUSH;
+	cache_3d = R300_RB3D_DC_FLUSH;
+	if (!(dev_priv->track_flush & RADEON_PURGE_EMITED)) {
+		/* we can purge, primitive where draw since last purge */
+		cache_z |= R300_ZC_FREE;
+		cache_2d |= R300_RB2D_DC_FREE;
+		cache_3d |= R300_RB3D_DC_FREE;
+	}
+
+	/* flush & purge zbuffer */
+	BEGIN_RING(2);
 	OUT_RING(CP_PACKET0(R300_ZB_ZCACHE_CTLSTAT, 0));
-	OUT_RING(R300_ZB_ZCACHE_CTLSTAT_ZC_FLUSH_FLUSH_AND_FREE|
-		 R300_ZB_ZCACHE_CTLSTAT_ZC_FREE_FREE);
-	OUT_RING(CP_PACKET3(RADEON_CP_NOP, 0));
-	OUT_RING(0x0);
+	OUT_RING(cache_z);
+	ADVANCE_RING();
+	/* flush & purge 3d */
+	BEGIN_RING(2);
+	OUT_RING(CP_PACKET0(R300_RB3D_DSTCACHE_CTLSTAT, 0));
+	OUT_RING(cache_3d);
+	ADVANCE_RING();
+	/* flush & purge texture */
+	BEGIN_RING(2);
+	OUT_RING(CP_PACKET0(R300_TX_INVALTAGS, 0));
+	OUT_RING(0);
+	ADVANCE_RING();
+	/* FIXME: is this one really needed ? */
+	BEGIN_RING(2);
+	OUT_RING(CP_PACKET0(R300_RB3D_AARESOLVE_CTL, 0));
+	OUT_RING(0);
+	ADVANCE_RING();
+	BEGIN_RING(2);
+	OUT_RING(CP_PACKET0(RADEON_WAIT_UNTIL, 0));
+	OUT_RING(RADEON_WAIT_3D_IDLECLEAN);
+	ADVANCE_RING();
+	/* flush & purge 2d through E2 as RB2D will trigger lockup */
+	BEGIN_RING(4);
+	OUT_RING(CP_PACKET0(R300_DSTCACHE_CTLSTAT, 0));
+	OUT_RING(cache_2d);
+	OUT_RING(CP_PACKET0(RADEON_WAIT_UNTIL, 0));
+	OUT_RING(RADEON_WAIT_2D_IDLECLEAN |
+		 RADEON_WAIT_HOST_IDLECLEAN);
 	ADVANCE_RING();
+	/* set flush & purge flags */
+	dev_priv->track_flush |= RADEON_FLUSH_EMITED | RADEON_PURGE_EMITED;
 }
 
 /**
@@ -905,8 +1034,7 @@ int r300_do_cp_cmdbuf(struct drm_device *dev,
 
 	DRM_DEBUG("\n");
 
-	/* See the comment above r300_emit_begin3d for why this call must be here,
-	 * and what the cleanup gotos are for. */
+	/* pacify */
 	r300_pacify(dev_priv);
 
 	if (cmdbuf->nbox <= R300_SIMULTANEOUS_CLIPRECTS) {
diff --git a/drivers/gpu/drm/radeon/r300_reg.h b/drivers/gpu/drm/radeon/r300_reg.h
index a6802f26afc4..ee6f811599a3 100644
--- a/drivers/gpu/drm/radeon/r300_reg.h
+++ b/drivers/gpu/drm/radeon/r300_reg.h
@@ -317,7 +317,7 @@ USE OR OTHER DEALINGS IN THE SOFTWARE.
  * Therefore, I suspect writing zero to 0x2284 synchronizes the engine and
  * avoids bugs caused by still running shaders reading bad data from memory.
  */
-#define R300_VAP_PVS_WAITIDLE               0x2284 /* GUESS */
+#define R300_VAP_PVS_STATE_FLUSH_REG        0x2284
 
 /* Absolutely no clue what this register is about. */
 #define R300_VAP_UNKNOWN_2288               0x2288
@@ -513,7 +513,7 @@ USE OR OTHER DEALINGS IN THE SOFTWARE.
 /* gap */
 
 /* Zero to flush caches. */
-#define R300_TX_CNTL                        0x4100
+#define R300_TX_INVALTAGS                   0x4100
 #define R300_TX_FLUSH                       0x0
 
 /* The upper enable bits are guessed, based on fglrx reported limits. */
@@ -1362,6 +1362,7 @@ USE OR OTHER DEALINGS IN THE SOFTWARE.
 #define R300_RB3D_COLORPITCH2               0x4E40 /* GUESS */
 #define R300_RB3D_COLORPITCH3               0x4E44 /* GUESS */
 
+#define R300_RB3D_AARESOLVE_CTL             0x4E88
 /* gap */
 
 /* Guess by Vladimir.
diff --git a/drivers/gpu/drm/radeon/radeon_cp.c b/drivers/gpu/drm/radeon/radeon_cp.c
index f0de81a5689d..248ab4a7d39f 100644
--- a/drivers/gpu/drm/radeon/radeon_cp.c
+++ b/drivers/gpu/drm/radeon/radeon_cp.c
@@ -40,6 +40,7 @@
 #define RADEON_FIFO_DEBUG	0
 
 static int radeon_do_cleanup_cp(struct drm_device * dev);
+static void radeon_do_cp_start(drm_radeon_private_t * dev_priv);
 
 static u32 R500_READ_MCIND(drm_radeon_private_t *dev_priv, int addr)
 {
@@ -198,23 +199,8 @@ static int radeon_do_pixcache_flush(drm_radeon_private_t * dev_priv)
 			DRM_UDELAY(1);
 		}
 	} else {
-		/* 3D */
-		tmp = RADEON_READ(R300_RB3D_DSTCACHE_CTLSTAT);
-		tmp |= RADEON_RB3D_DC_FLUSH_ALL;
-		RADEON_WRITE(R300_RB3D_DSTCACHE_CTLSTAT, tmp);
-
-		/* 2D */
-		tmp = RADEON_READ(R300_DSTCACHE_CTLSTAT);
-		tmp |= RADEON_RB3D_DC_FLUSH_ALL;
-		RADEON_WRITE(R300_DSTCACHE_CTLSTAT, tmp);
-
-		for (i = 0; i < dev_priv->usec_timeout; i++) {
-			if (!(RADEON_READ(R300_DSTCACHE_CTLSTAT)
-			  & RADEON_RB3D_DC_BUSY)) {
-				return 0;
-			}
-			DRM_UDELAY(1);
-		}
+		/* don't flush or purge cache here or lockup */
+		return 0;
 	}
 
 #if RADEON_FIFO_DEBUG
@@ -237,6 +223,9 @@ static int radeon_do_wait_for_fifo(drm_radeon_private_t * dev_priv, int entries)
 			return 0;
 		DRM_UDELAY(1);
 	}
+	DRM_DEBUG("wait for fifo failed status : 0x%08X 0x%08X\n",
+		 RADEON_READ(RADEON_RBBM_STATUS),
+		 RADEON_READ(R300_VAP_CNTL_STATUS));
 
 #if RADEON_FIFO_DEBUG
 	DRM_ERROR("failed!\n");
@@ -263,6 +252,9 @@ static int radeon_do_wait_for_idle(drm_radeon_private_t * dev_priv)
 		}
 		DRM_UDELAY(1);
 	}
+	DRM_DEBUG("wait idle failed status : 0x%08X 0x%08X\n",
+		 RADEON_READ(RADEON_RBBM_STATUS),
+		 RADEON_READ(R300_VAP_CNTL_STATUS));
 
 #if RADEON_FIFO_DEBUG
 	DRM_ERROR("failed!\n");
@@ -443,14 +435,20 @@ static void radeon_do_cp_start(drm_radeon_private_t * dev_priv)
 
 	dev_priv->cp_running = 1;
 
-	BEGIN_RING(6);
-
+	BEGIN_RING(8);
+	/* isync can only be written through cp on r5xx write it here */
+	OUT_RING(CP_PACKET0(RADEON_ISYNC_CNTL, 0));
+	OUT_RING(RADEON_ISYNC_ANY2D_IDLE3D |
+		 RADEON_ISYNC_ANY3D_IDLE2D |
+		 RADEON_ISYNC_WAIT_IDLEGUI |
+		 RADEON_ISYNC_CPSCRATCH_IDLEGUI);
 	RADEON_PURGE_CACHE();
 	RADEON_PURGE_ZCACHE();
 	RADEON_WAIT_UNTIL_IDLE();
-
 	ADVANCE_RING();
 	COMMIT_RING();
+
+	dev_priv->track_flush |= RADEON_FLUSH_EMITED | RADEON_PURGE_EMITED;
 }
 
 /* Reset the Command Processor.  This will not flush any pending
diff --git a/drivers/gpu/drm/radeon/radeon_drv.c b/drivers/gpu/drm/radeon/radeon_drv.c
index 349ac3d3b848..637bd7faf132 100644
--- a/drivers/gpu/drm/radeon/radeon_drv.c
+++ b/drivers/gpu/drm/radeon/radeon_drv.c
@@ -38,7 +38,7 @@
 
 int radeon_no_wb;
 
-MODULE_PARM_DESC(no_wb, "Disable AGP writeback for scratch registers\n");
+MODULE_PARM_DESC(no_wb, "Disable AGP writeback for scratch registers");
 module_param_named(no_wb, radeon_no_wb, int, 0444);
 
 static int dri_library_name(struct drm_device *dev, char *buf)
diff --git a/drivers/gpu/drm/radeon/radeon_drv.h b/drivers/gpu/drm/radeon/radeon_drv.h
index 3f0eca957aa7..099381693175 100644
--- a/drivers/gpu/drm/radeon/radeon_drv.h
+++ b/drivers/gpu/drm/radeon/radeon_drv.h
@@ -220,6 +220,9 @@ struct radeon_virt_surface {
 	struct drm_file *file_priv;
 };
 
+#define RADEON_FLUSH_EMITED	(1 < 0)
+#define RADEON_PURGE_EMITED	(1 < 1)
+
 typedef struct drm_radeon_private {
 	drm_radeon_ring_buffer_t ring;
 	drm_radeon_sarea_t *sarea_priv;
@@ -311,6 +314,7 @@ typedef struct drm_radeon_private {
 	unsigned long fb_aper_offset;
 
 	int num_gb_pipes;
+	int track_flush;
 } drm_radeon_private_t;
 
 typedef struct drm_radeon_buf_priv {
@@ -693,7 +697,6 @@ extern int r300_do_cp_cmdbuf(struct drm_device * dev,
 #define R300_ZB_ZCACHE_CTLSTAT                  0x4f18
 #	define R300_ZC_FLUSH		        (1 << 0)
 #	define R300_ZC_FREE		        (1 << 1)
-#	define R300_ZC_FLUSH_ALL		0x3
 #	define R300_ZC_BUSY		        (1 << 31)
 #define RADEON_RB3D_DSTCACHE_CTLSTAT	0x325c
 #	define RADEON_RB3D_DC_FLUSH		(3 << 0)
@@ -701,6 +704,8 @@ extern int r300_do_cp_cmdbuf(struct drm_device * dev,
 #	define RADEON_RB3D_DC_FLUSH_ALL		0xf
 #	define RADEON_RB3D_DC_BUSY		(1 << 31)
 #define R300_RB3D_DSTCACHE_CTLSTAT              0x4e4c
+#	define R300_RB3D_DC_FLUSH		(2 << 0)
+#	define R300_RB3D_DC_FREE		(2 << 2)
 #	define R300_RB3D_DC_FINISH		(1 << 4)
 #define RADEON_RB3D_ZSTENCILCNTL	0x1c2c
 #	define RADEON_Z_TEST_MASK		(7 << 4)
@@ -1246,17 +1251,17 @@ do {									\
 		OUT_RING(RADEON_RB3D_DC_FLUSH);				\
 	} else {                                                        \
 		OUT_RING(CP_PACKET0(R300_RB3D_DSTCACHE_CTLSTAT, 0));	\
-		OUT_RING(RADEON_RB3D_DC_FLUSH);				\
+		OUT_RING(R300_RB3D_DC_FLUSH);				\
 	}                                                               \
 } while (0)
 
 #define RADEON_PURGE_CACHE() do {					\
 	if ((dev_priv->flags & RADEON_FAMILY_MASK) <= CHIP_RV280) {	\
 		OUT_RING(CP_PACKET0(RADEON_RB3D_DSTCACHE_CTLSTAT, 0));	\
-		OUT_RING(RADEON_RB3D_DC_FLUSH_ALL);			\
+		OUT_RING(RADEON_RB3D_DC_FLUSH | RADEON_RB3D_DC_FREE);	\
 	} else {                                                        \
 		OUT_RING(CP_PACKET0(R300_RB3D_DSTCACHE_CTLSTAT, 0));	\
-		OUT_RING(RADEON_RB3D_DC_FLUSH_ALL);			\
+		OUT_RING(R300_RB3D_DC_FLUSH | R300_RB3D_DC_FREE);	\
 	}                                                               \
 } while (0)
 
@@ -1273,10 +1278,10 @@ do {									\
 #define RADEON_PURGE_ZCACHE() do {					\
 	if ((dev_priv->flags & RADEON_FAMILY_MASK) <= CHIP_RV280) {	\
 		OUT_RING(CP_PACKET0(RADEON_RB3D_ZCACHE_CTLSTAT, 0));	\
-		OUT_RING(RADEON_RB3D_ZC_FLUSH_ALL);			\
+		OUT_RING(RADEON_RB3D_ZC_FLUSH | RADEON_RB3D_ZC_FREE);			\
 	} else {                                                        \
-		OUT_RING(CP_PACKET0(R300_RB3D_DSTCACHE_CTLSTAT, 0));	\
-		OUT_RING(R300_ZC_FLUSH_ALL);				\
+		OUT_RING(CP_PACKET0(R300_ZB_ZCACHE_CTLSTAT, 0));	\
+		OUT_RING(R300_ZC_FLUSH | R300_ZC_FREE);				\
 	}                                                               \
 } while (0)
 
diff --git a/drivers/hid/usbhid/hid-quirks.c b/drivers/hid/usbhid/hid-quirks.c
index 61e78a4369b9..b15f88249639 100644
--- a/drivers/hid/usbhid/hid-quirks.c
+++ b/drivers/hid/usbhid/hid-quirks.c
@@ -654,12 +654,12 @@ static const struct hid_blacklist {
 	{ USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_WIRELESS_ANSI, HID_QUIRK_APPLE_NUMLOCK_EMULATION | HID_QUIRK_APPLE_HAS_FN },
 	{ USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_WIRELESS_ISO, HID_QUIRK_APPLE_NUMLOCK_EMULATION | HID_QUIRK_APPLE_HAS_FN | HID_QUIRK_APPLE_ISO_KEYBOARD },
 	{ USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_WIRELESS_JIS, HID_QUIRK_APPLE_NUMLOCK_EMULATION | HID_QUIRK_APPLE_HAS_FN },
-	{ USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING_ANSI, HID_QUIRK_APPLE_HAS_FN },
-	{ USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING_ISO, HID_QUIRK_APPLE_HAS_FN | HID_QUIRK_APPLE_ISO_KEYBOARD },
-	{ USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING_JIS, HID_QUIRK_APPLE_HAS_FN },
-	{ USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING2_ANSI, HID_QUIRK_APPLE_HAS_FN },
-	{ USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING2_ISO, HID_QUIRK_APPLE_HAS_FN | HID_QUIRK_APPLE_ISO_KEYBOARD },
-	{ USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING2_JIS, HID_QUIRK_APPLE_HAS_FN },
+	{ USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING_ANSI, HID_QUIRK_APPLE_HAS_FN | HID_QUIRK_IGNORE_MOUSE },
+	{ USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING_ISO, HID_QUIRK_APPLE_HAS_FN | HID_QUIRK_APPLE_ISO_KEYBOARD | HID_QUIRK_IGNORE_MOUSE},
+	{ USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING_JIS, HID_QUIRK_APPLE_HAS_FN | HID_QUIRK_IGNORE_MOUSE},
+	{ USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING2_ANSI, HID_QUIRK_APPLE_HAS_FN | HID_QUIRK_IGNORE_MOUSE},
+	{ USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING2_ISO, HID_QUIRK_APPLE_HAS_FN | HID_QUIRK_APPLE_ISO_KEYBOARD | HID_QUIRK_IGNORE_MOUSE },
+	{ USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING2_JIS, HID_QUIRK_APPLE_HAS_FN  | HID_QUIRK_IGNORE_MOUSE },
 	{ USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_FOUNTAIN_TP_ONLY, HID_QUIRK_APPLE_NUMLOCK_EMULATION | HID_QUIRK_APPLE_HAS_FN | HID_QUIRK_IGNORE_MOUSE },
 	{ USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER1_TP_ONLY, HID_QUIRK_APPLE_NUMLOCK_EMULATION | HID_QUIRK_APPLE_HAS_FN | HID_QUIRK_IGNORE_MOUSE },
 
diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
index 00ff53348491..d402e8d813ce 100644
--- a/drivers/hwmon/Kconfig
+++ b/drivers/hwmon/Kconfig
@@ -57,6 +57,16 @@ config SENSORS_ABITUGURU3
 	  This driver can also be built as a module.  If so, the module
 	  will be called abituguru3.
 
+config SENSORS_AD7414
+	tristate "Analog Devices AD7414"
+	depends on I2C && EXPERIMENTAL
+	help
+	  If you say yes here you get support for the Analog Devices
+	  AD7414 temperature monitoring chip.
+
+	  This driver can also be built as a module. If so, the module
+	  will be called ad7414.
+
 config SENSORS_AD7418
 	tristate "Analog Devices AD7416, AD7417 and AD7418"
 	depends on I2C && EXPERIMENTAL
@@ -67,6 +77,22 @@ config SENSORS_AD7418
 	  This driver can also be built as a module. If so, the module
 	  will be called ad7418.
 
+config SENSORS_ADCXX
+	tristate "National Semiconductor ADCxxxSxxx"
+	depends on SPI_MASTER && EXPERIMENTAL
+	help
+	  If you say yes here you get support for the National Semiconductor
+	  ADC<bb><c>S<sss> chip family, where
+	  * bb  is the resolution in number of bits (8, 10, 12)
+	  * c   is the number of channels (1, 2, 4, 8)
+	  * sss is the maximum conversion speed (021 for 200 kSPS, 051 for 500
+	    kSPS and 101 for 1 MSPS)
+
+	  Examples : ADC081S101, ADC124S501, ...
+
+	  This driver can also be built as a module.  If so, the module
+	  will be called adcxx.
+
 config SENSORS_ADM1021
 	tristate "Analog Devices ADM1021 and compatibles"
 	depends on I2C
@@ -124,7 +150,7 @@ config SENSORS_ADM1031
 
 config SENSORS_ADM9240
 	tristate "Analog Devices ADM9240 and compatibles"
-	depends on I2C && EXPERIMENTAL
+	depends on I2C
 	select HWMON_VID
 	help
 	  If you say yes here you get support for Analog Devices ADM9240,
@@ -394,13 +420,24 @@ config SENSORS_LM75
 	tristate "National Semiconductor LM75 and compatibles"
 	depends on I2C
 	help
-	  If you say yes here you get support for National Semiconductor LM75
-	  sensor chips and clones: Dallas Semiconductor DS75 and DS1775 (in
-	  9-bit precision mode), and TelCom (now Microchip) TCN75.
+	  If you say yes here you get support for one common type of
+	  temperature sensor chip, with models including:
+
+		- Dallas Semiconductor DS75 and DS1775
+		- Maxim MAX6625 and MAX6626
+		- Microchip MCP980x
+		- National Semiconductor LM75
+		- NXP's LM75A
+		- ST Microelectronics STDS75
+		- TelCom (now Microchip) TCN75
+		- Texas Instruments TMP100, TMP101, TMP75, TMP175, TMP275
+
+	  This driver supports driver model based binding through board
+	  specific I2C device tables.
 
-	  The DS75 and DS1775 in 10- to 12-bit precision modes will require
-	  a force module parameter. The driver will not handle the extra
-	  precision anyhow.
+	  It also supports the "legacy" style of driver binding.  To use
+	  that with some chips which don't replicate LM75 quirks exactly,
+	  you may need the "force" module parameter.
 
 	  This driver can also be built as a module.  If so, the module
 	  will be called lm75.
@@ -564,8 +601,8 @@ config SENSORS_DME1737
 	select HWMON_VID
 	help
 	  If you say yes here you get support for the hardware monitoring
-	  and fan control features of the SMSC DME1737 (and compatibles
-	  like the Asus A8000) and SCH311x Super-I/O chips.
+	  and fan control features of the SMSC DME1737, SCH311x, SCH5027, and
+	  Asus A8000 Super-I/O chips.
 
 	  This driver can also be built as a module.  If so, the module
 	  will be called dme1737.
diff --git a/drivers/hwmon/Makefile b/drivers/hwmon/Makefile
index d098677e08de..950134ab8426 100644
--- a/drivers/hwmon/Makefile
+++ b/drivers/hwmon/Makefile
@@ -15,7 +15,9 @@ obj-$(CONFIG_SENSORS_W83791D)	+= w83791d.o
 
 obj-$(CONFIG_SENSORS_ABITUGURU)	+= abituguru.o
 obj-$(CONFIG_SENSORS_ABITUGURU3)+= abituguru3.o
+obj-$(CONFIG_SENSORS_AD7414)	+= ad7414.o
 obj-$(CONFIG_SENSORS_AD7418)	+= ad7418.o
+obj-$(CONFIG_SENSORS_ADCXX)	+= adcxx.o
 obj-$(CONFIG_SENSORS_ADM1021)	+= adm1021.o
 obj-$(CONFIG_SENSORS_ADM1025)	+= adm1025.o
 obj-$(CONFIG_SENSORS_ADM1026)	+= adm1026.o
diff --git a/drivers/hwmon/abituguru3.c b/drivers/hwmon/abituguru3.c
index f00f497b9ca9..d568c65c1370 100644
--- a/drivers/hwmon/abituguru3.c
+++ b/drivers/hwmon/abituguru3.c
@@ -1,5 +1,8 @@
 /*
-    abituguru3.c Copyright (c) 2006 Hans de Goede <j.w.r.degoede@hhs.nl>
+    abituguru3.c
+
+    Copyright (c) 2006-2008 Hans de Goede <j.w.r.degoede@hhs.nl>
+    Copyright (c) 2008 Alistair John Strachan <alistair@devzero.co.uk>
 
     This program is free software; you can redistribute it and/or modify
     it under the terms of the GNU General Public License as published by
@@ -116,7 +119,7 @@ struct abituguru3_sensor_info {
 
 struct abituguru3_motherboard_info {
 	u16 id;
-	const char *name;
+	const char *dmi_name;
 	/* + 1 -> end of sensors indicated by a sensor with name == NULL */
 	struct abituguru3_sensor_info sensors[ABIT_UGURU3_MAX_NO_SENSORS + 1];
 };
@@ -161,7 +164,7 @@ struct abituguru3_data {
 
 /* Constants */
 static const struct abituguru3_motherboard_info abituguru3_motherboards[] = {
-	{ 0x000C, "unknown", {
+	{ 0x000C, NULL /* Unknown, need DMI string */, {
 		{ "CPU Core",		 0, 0, 10, 1, 0 },
 		{ "DDR",		 1, 0, 10, 1, 0 },
 		{ "DDR VTT",		 2, 0, 10, 1, 0 },
@@ -183,7 +186,7 @@ static const struct abituguru3_motherboard_info abituguru3_motherboards[] = {
 		{ "AUX1 Fan",		35, 2, 60, 1, 0 },
 		{ NULL, 0, 0, 0, 0, 0 } }
 	},
-	{ 0x000D, "Abit AW8", {
+	{ 0x000D, NULL /* Abit AW8, need DMI string */, {
 		{ "CPU Core",		 0, 0, 10, 1, 0 },
 		{ "DDR",		 1, 0, 10, 1, 0 },
 		{ "DDR VTT",		 2, 0, 10, 1, 0 },
@@ -212,7 +215,7 @@ static const struct abituguru3_motherboard_info abituguru3_motherboards[] = {
 		{ "AUX5 Fan",		39, 2, 60, 1, 0 },
 		{ NULL, 0, 0, 0, 0, 0 } }
 	},
-	{ 0x000E, "AL-8", {
+	{ 0x000E, NULL /* AL-8, need DMI string */, {
 		{ "CPU Core",		 0, 0, 10, 1, 0 },
 		{ "DDR",		 1, 0, 10, 1, 0 },
 		{ "DDR VTT",		 2, 0, 10, 1, 0 },
@@ -233,7 +236,7 @@ static const struct abituguru3_motherboard_info abituguru3_motherboards[] = {
 		{ "SYS Fan",		34, 2, 60, 1, 0 },
 		{ NULL, 0, 0, 0, 0, 0 } }
 	},
-	{ 0x000F, "unknown", {
+	{ 0x000F, NULL /* Unknown, need DMI string */, {
 		{ "CPU Core",		 0, 0, 10, 1, 0 },
 		{ "DDR",		 1, 0, 10, 1, 0 },
 		{ "DDR VTT",		 2, 0, 10, 1, 0 },
@@ -254,7 +257,7 @@ static const struct abituguru3_motherboard_info abituguru3_motherboards[] = {
 		{ "SYS Fan",		34, 2, 60, 1, 0 },
 		{ NULL, 0, 0, 0, 0, 0 } }
 	},
-	{ 0x0010, "Abit NI8 SLI GR", {
+	{ 0x0010, NULL /* Abit NI8 SLI GR, need DMI string */, {
 		{ "CPU Core",		 0, 0, 10, 1, 0 },
 		{ "DDR",		 1, 0, 10, 1, 0 },
 		{ "DDR VTT",		 2, 0, 10, 1, 0 },
@@ -276,7 +279,7 @@ static const struct abituguru3_motherboard_info abituguru3_motherboards[] = {
 		{ "OTES1 Fan",		36, 2, 60, 1, 0 },
 		{ NULL, 0, 0, 0, 0, 0 } }
 	},
-	{ 0x0011, "Abit AT8 32X", {
+	{ 0x0011, NULL /* Abit AT8 32X, need DMI string */, {
 		{ "CPU Core",		 0, 0, 10, 1, 0 },
 		{ "DDR",		 1, 0, 20, 1, 0 },
 		{ "DDR VTT",		 2, 0, 10, 1, 0 },
@@ -302,7 +305,7 @@ static const struct abituguru3_motherboard_info abituguru3_motherboards[] = {
 		{ "AUX2 Fan",		36, 2, 60, 1, 0 },
 		{ NULL, 0, 0, 0, 0, 0 } }
 	},
-	{ 0x0012, "Abit AN8 32X", {
+	{ 0x0012, NULL /* Abit AN8 32X, need DMI string */, {
 		{ "CPU Core",		 0, 0, 10, 1, 0 },
 		{ "DDR",		 1, 0, 20, 1, 0 },
 		{ "DDR VTT",		 2, 0, 10, 1, 0 },
@@ -324,7 +327,7 @@ static const struct abituguru3_motherboard_info abituguru3_motherboards[] = {
 		{ "AUX1 Fan",		36, 2, 60, 1, 0 },
 		{ NULL, 0, 0, 0, 0, 0 } }
 	},
-	{ 0x0013, "Abit AW8D", {
+	{ 0x0013, NULL /* Abit AW8D, need DMI string */, {
 		{ "CPU Core",		 0, 0, 10, 1, 0 },
 		{ "DDR",		 1, 0, 10, 1, 0 },
 		{ "DDR VTT",		 2, 0, 10, 1, 0 },
@@ -353,7 +356,7 @@ static const struct abituguru3_motherboard_info abituguru3_motherboards[] = {
 		{ "AUX5 Fan",		39, 2, 60, 1, 0 },
 		{ NULL, 0, 0, 0, 0, 0 } }
 	},
-	{ 0x0014, "Abit AB9 Pro", {
+	{ 0x0014, NULL /* Abit AB9 Pro, need DMI string */, {
 		{ "CPU Core",		 0, 0, 10, 1, 0 },
 		{ "DDR",		 1, 0, 10, 1, 0 },
 		{ "DDR VTT",		 2, 0, 10, 1, 0 },
@@ -374,7 +377,7 @@ static const struct abituguru3_motherboard_info abituguru3_motherboards[] = {
 		{ "SYS Fan",		34, 2, 60, 1, 0 },
 		{ NULL, 0, 0, 0, 0, 0 } }
 	},
-	{ 0x0015, "unknown", {
+	{ 0x0015, NULL /* Unknown, need DMI string */, {
 		{ "CPU Core",		 0, 0, 10, 1, 0 },
 		{ "DDR",		 1, 0, 20, 1, 0 },
 		{ "DDR VTT",		 2, 0, 10, 1, 0 },
@@ -398,7 +401,7 @@ static const struct abituguru3_motherboard_info abituguru3_motherboards[] = {
 		{ "AUX3 Fan",		36, 2, 60, 1, 0 },
 		{ NULL, 0, 0, 0, 0, 0 } }
 	},
-	{ 0x0016, "AW9D-MAX", {
+	{ 0x0016, NULL /* AW9D-MAX, need DMI string */, {
 		{ "CPU Core",		 0, 0, 10, 1, 0 },
 		{ "DDR2",		 1, 0, 20, 1, 0 },
 		{ "DDR2 VTT",		 2, 0, 10, 1, 0 },
@@ -426,7 +429,7 @@ static const struct abituguru3_motherboard_info abituguru3_motherboards[] = {
 		{ "OTES1 Fan",		38, 2, 60, 1, 0 },
 		{ NULL, 0, 0, 0, 0, 0 } }
 	},
-	{ 0x0017, "unknown", {
+	{ 0x0017, NULL /* Unknown, need DMI string */, {
 		{ "CPU Core",		 0, 0, 10, 1, 0 },
 		{ "DDR2",		 1, 0, 20, 1, 0 },
 		{ "DDR2 VTT",		 2, 0, 10, 1, 0 },
@@ -451,7 +454,7 @@ static const struct abituguru3_motherboard_info abituguru3_motherboards[] = {
 		{ "AUX3 FAN",		37, 2, 60, 1, 0 },
 		{ NULL, 0, 0, 0, 0, 0 } }
 	},
-	{ 0x0018, "unknown", {
+	{ 0x0018, NULL /* Unknown, need DMI string */, {
 		{ "CPU Core",		 0, 0, 10, 1, 0 },
 		{ "DDR2",		 1, 0, 20, 1, 0 },
 		{ "DDR2 VTT",		 2, 0, 10, 1, 0 },
@@ -478,7 +481,7 @@ static const struct abituguru3_motherboard_info abituguru3_motherboards[] = {
 		{ "AUX3 Fan",		36, 2, 60, 1, 0 },
 		{ NULL, 0, 0, 0, 0, 0 } }
 	},
-	{ 0x0019, "unknown", {
+	{ 0x0019, NULL /* Unknown, need DMI string */, {
 		{ "CPU Core",		 7, 0, 10, 1, 0 },
 		{ "DDR2",		13, 0, 20, 1, 0 },
 		{ "DDR2 VTT",		14, 0, 10, 1, 0 },
@@ -505,7 +508,7 @@ static const struct abituguru3_motherboard_info abituguru3_motherboards[] = {
 		{ "AUX3 FAN",		36, 2, 60, 1, 0 },
 		{ NULL, 0, 0, 0, 0, 0 } }
 	},
-	{ 0x001A, "Abit IP35 Pro", {
+	{ 0x001A, "IP35 Pro(Intel P35-ICH9R)", {
 		{ "CPU Core",		 0, 0, 10, 1, 0 },
 		{ "DDR2",		 1, 0, 20, 1, 0 },
 		{ "DDR2 VTT",		 2, 0, 10, 1, 0 },
@@ -533,7 +536,7 @@ static const struct abituguru3_motherboard_info abituguru3_motherboards[] = {
 		{ "AUX4 Fan",		37, 2, 60, 1, 0 },
 		{ NULL, 0, 0, 0, 0, 0 } }
 	},
-	{ 0x001B, "unknown", {
+	{ 0x001B, NULL /* Unknown, need DMI string */, {
 		{ "CPU Core",		 0, 0, 10, 1, 0 },
 		{ "DDR3",		 1, 0, 20, 1, 0 },
 		{ "DDR3 VTT",		 2, 0, 10, 1, 0 },
@@ -560,7 +563,7 @@ static const struct abituguru3_motherboard_info abituguru3_motherboards[] = {
 		{ "AUX3 Fan",		36, 2, 60, 1, 0 },
 		{ NULL, 0, 0, 0, 0, 0 } }
 	},
-	{ 0x001C, "unknown", {
+	{ 0x001C, NULL /* Unknown, need DMI string */, {
 		{ "CPU Core",		 0, 0, 10, 1, 0 },
 		{ "DDR2",		 1, 0, 20, 1, 0 },
 		{ "DDR2 VTT",		 2, 0, 10, 1, 0 },
@@ -935,9 +938,18 @@ static int __devinit abituguru3_probe(struct platform_device *pdev)
 		goto abituguru3_probe_error;
 	}
 	data->sensors = abituguru3_motherboards[i].sensors;
+
 	printk(KERN_INFO ABIT_UGURU3_NAME ": found Abit uGuru3, motherboard "
-		"ID: %04X (%s)\n", (unsigned int)id,
-		abituguru3_motherboards[i].name);
+		"ID: %04X\n", (unsigned int)id);
+
+#ifdef CONFIG_DMI
+	if (!abituguru3_motherboards[i].dmi_name) {
+		printk(KERN_WARNING ABIT_UGURU3_NAME ": this motherboard was "
+			"not detected using DMI. Please send the output of "
+			"\"dmidecode\" to the abituguru3 maintainer"
+			"(see MAINTAINERS)\n");
+	}
+#endif
 
 	/* Fill the sysfs attr array */
 	sysfs_attr_i = 0;
@@ -1109,6 +1121,46 @@ static struct platform_driver abituguru3_driver = {
 	.resume = abituguru3_resume
 };
 
+#ifdef CONFIG_DMI
+
+static int __init abituguru3_dmi_detect(void)
+{
+	const char *board_vendor, *board_name;
+	int i, err = (force) ? 1 : -ENODEV;
+
+	board_vendor = dmi_get_system_info(DMI_BOARD_VENDOR);
+	if (!board_vendor || strcmp(board_vendor, "http://www.abit.com.tw/"))
+		return err;
+
+	board_name = dmi_get_system_info(DMI_BOARD_NAME);
+	if (!board_name)
+		return err;
+
+	for (i = 0; abituguru3_motherboards[i].id; i++) {
+		const char *dmi_name = abituguru3_motherboards[i].dmi_name;
+		if (dmi_name && !strcmp(dmi_name, board_name))
+			break;
+	}
+
+	if (!abituguru3_motherboards[i].id)
+		return 1;
+
+	return 0;
+}
+
+#else /* !CONFIG_DMI */
+
+static inline int abituguru3_dmi_detect(void)
+{
+	return -ENODEV;
+}
+
+#endif /* CONFIG_DMI */
+
+/* FIXME: Manual detection should die eventually; we need to collect stable
+ *        DMI model names first before we can rely entirely on CONFIG_DMI.
+ */
+
 static int __init abituguru3_detect(void)
 {
 	/* See if there is an uguru3 there. An idle uGuru3 will hold 0x00 or
@@ -1119,7 +1171,7 @@ static int __init abituguru3_detect(void)
 	if (((data_val == 0x00) || (data_val == 0x08)) &&
 			((cmd_val == 0xAC) || (cmd_val == 0x05) ||
 			 (cmd_val == 0x55)))
-		return ABIT_UGURU3_BASE;
+		return 0;
 
 	ABIT_UGURU3_DEBUG("no Abit uGuru3 found, data = 0x%02X, cmd = "
 		"0x%02X\n", (unsigned int)data_val, (unsigned int)cmd_val);
@@ -1127,7 +1179,7 @@ static int __init abituguru3_detect(void)
 	if (force) {
 		printk(KERN_INFO ABIT_UGURU3_NAME ": Assuming Abit uGuru3 is "
 				"present because of \"force\" parameter\n");
-		return ABIT_UGURU3_BASE;
+		return 0;
 	}
 
 	/* No uGuru3 found */
@@ -1138,27 +1190,29 @@ static struct platform_device *abituguru3_pdev;
 
 static int __init abituguru3_init(void)
 {
-	int address, err;
 	struct resource res = { .flags = IORESOURCE_IO };
-
-#ifdef CONFIG_DMI
-	const char *board_vendor = dmi_get_system_info(DMI_BOARD_VENDOR);
-
-	/* safety check, refuse to load on non Abit motherboards */
-	if (!force && (!board_vendor ||
-			strcmp(board_vendor, "http://www.abit.com.tw/")))
-		return -ENODEV;
-#endif
-
-	address = abituguru3_detect();
-	if (address < 0)
-		return address;
+	int err;
+
+	/* Attempt DMI detection first */
+	err = abituguru3_dmi_detect();
+	if (err < 0)
+		return err;
+
+	/* Fall back to manual detection if there was no exact
+	 * board name match, or force was specified.
+	 */
+	if (err > 0) {
+		err = abituguru3_detect();
+		if (err)
+			return err;
+	}
 
 	err = platform_driver_register(&abituguru3_driver);
 	if (err)
 		goto exit;
 
-	abituguru3_pdev = platform_device_alloc(ABIT_UGURU3_NAME, address);
+	abituguru3_pdev = platform_device_alloc(ABIT_UGURU3_NAME,
+						ABIT_UGURU3_BASE);
 	if (!abituguru3_pdev) {
 		printk(KERN_ERR ABIT_UGURU3_NAME
 			": Device allocation failed\n");
@@ -1166,8 +1220,8 @@ static int __init abituguru3_init(void)
 		goto exit_driver_unregister;
 	}
 
-	res.start = address;
-	res.end = address + ABIT_UGURU3_REGION_LENGTH - 1;
+	res.start = ABIT_UGURU3_BASE;
+	res.end = ABIT_UGURU3_BASE + ABIT_UGURU3_REGION_LENGTH - 1;
 	res.name = ABIT_UGURU3_NAME;
 
 	err = platform_device_add_resources(abituguru3_pdev, &res, 1);
diff --git a/drivers/hwmon/ad7414.c b/drivers/hwmon/ad7414.c
new file mode 100644
index 000000000000..ce8d94fbfd7e
--- /dev/null
+++ b/drivers/hwmon/ad7414.c
@@ -0,0 +1,268 @@
+/*
+ * An hwmon driver for the Analog Devices AD7414
+ *
+ * Copyright 2006 Stefan Roese <sr at denx.de>, DENX Software Engineering
+ *
+ * Copyright (c) 2008 PIKA Technologies
+ *   Sean MacLennan <smaclennan@pikatech.com>
+ *
+ * Copyright (c) 2008 Spansion Inc.
+ *   Frank Edelhaeuser <frank.edelhaeuser at spansion.com>
+ *   (converted to "new style" I2C driver model, removed checkpatch.pl warnings)
+ *
+ * Based on ad7418.c
+ * Copyright 2006 Tower Technologies, Alessandro Zummo <a.zummo at towertech.it>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/module.h>
+#include <linux/jiffies.h>
+#include <linux/i2c.h>
+#include <linux/hwmon.h>
+#include <linux/hwmon-sysfs.h>
+#include <linux/err.h>
+#include <linux/mutex.h>
+#include <linux/sysfs.h>
+
+
+/* AD7414 registers */
+#define AD7414_REG_TEMP		0x00
+#define AD7414_REG_CONF		0x01
+#define AD7414_REG_T_HIGH	0x02
+#define AD7414_REG_T_LOW	0x03
+
+static u8 AD7414_REG_LIMIT[] = { AD7414_REG_T_HIGH, AD7414_REG_T_LOW };
+
+struct ad7414_data {
+	struct device		*hwmon_dev;
+	struct mutex		lock;	/* atomic read data updates */
+	char			valid;	/* !=0 if following fields are valid */
+	unsigned long		next_update;	/* In jiffies */
+	s16			temp_input;	/* Register values */
+	s8			temps[ARRAY_SIZE(AD7414_REG_LIMIT)];
+};
+
+/* REG: (0.25C/bit, two's complement) << 6 */
+static inline int ad7414_temp_from_reg(s16 reg)
+{
+	/* use integer division instead of equivalent right shift to
+	 * guarantee arithmetic shift and preserve the sign
+	 */
+	return ((int)reg / 64) * 250;
+}
+
+static inline int ad7414_read(struct i2c_client *client, u8 reg)
+{
+	if (reg == AD7414_REG_TEMP) {
+		int value = i2c_smbus_read_word_data(client, reg);
+		return (value < 0) ? value : swab16(value);
+	} else
+		return i2c_smbus_read_byte_data(client, reg);
+}
+
+static inline int ad7414_write(struct i2c_client *client, u8 reg, u8 value)
+{
+	return i2c_smbus_write_byte_data(client, reg, value);
+}
+
+struct ad7414_data *ad7414_update_device(struct device *dev)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct ad7414_data *data = i2c_get_clientdata(client);
+
+	mutex_lock(&data->lock);
+
+	if (time_after(jiffies, data->next_update) || !data->valid) {
+		int value, i;
+
+		dev_dbg(&client->dev, "starting ad7414 update\n");
+
+		value = ad7414_read(client, AD7414_REG_TEMP);
+		if (value < 0)
+			dev_dbg(&client->dev, "AD7414_REG_TEMP err %d\n",
+				value);
+		else
+			data->temp_input = value;
+
+		for (i = 0; i < ARRAY_SIZE(AD7414_REG_LIMIT); ++i) {
+			value = ad7414_read(client, AD7414_REG_LIMIT[i]);
+			if (value < 0)
+				dev_dbg(&client->dev, "AD7414 reg %d err %d\n",
+					AD7414_REG_LIMIT[i], value);
+			else
+				data->temps[i] = value;
+		}
+
+		data->next_update = jiffies + HZ + HZ / 2;
+		data->valid = 1;
+	}
+
+	mutex_unlock(&data->lock);
+
+	return data;
+}
+
+static ssize_t show_temp_input(struct device *dev,
+			       struct device_attribute *attr, char *buf)
+{
+	struct ad7414_data *data = ad7414_update_device(dev);
+	return sprintf(buf, "%d\n", ad7414_temp_from_reg(data->temp_input));
+}
+static SENSOR_DEVICE_ATTR(temp1_input, S_IRUGO, show_temp_input, NULL, 0);
+
+static ssize_t show_max_min(struct device *dev, struct device_attribute *attr,
+			  char *buf)
+{
+	int index = to_sensor_dev_attr(attr)->index;
+	struct ad7414_data *data = ad7414_update_device(dev);
+	return sprintf(buf, "%d\n", data->temps[index] * 1000);
+}
+
+static ssize_t set_max_min(struct device *dev,
+			   struct device_attribute *attr,
+			   const char *buf, size_t count)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct ad7414_data *data = i2c_get_clientdata(client);
+	int index = to_sensor_dev_attr(attr)->index;
+	u8 reg = AD7414_REG_LIMIT[index];
+	long temp = simple_strtol(buf, NULL, 10);
+
+	temp = SENSORS_LIMIT(temp, -40000, 85000);
+	temp = (temp + (temp < 0 ? -500 : 500)) / 1000;
+
+	mutex_lock(&data->lock);
+	data->temps[index] = temp;
+	ad7414_write(client, reg, temp);
+	mutex_unlock(&data->lock);
+	return count;
+}
+
+static SENSOR_DEVICE_ATTR(temp1_max, S_IWUSR | S_IRUGO,
+			  show_max_min, set_max_min, 0);
+static SENSOR_DEVICE_ATTR(temp1_min, S_IWUSR | S_IRUGO,
+			  show_max_min, set_max_min, 1);
+
+static ssize_t show_alarm(struct device *dev, struct device_attribute *attr,
+			  char *buf)
+{
+	int bitnr = to_sensor_dev_attr(attr)->index;
+	struct ad7414_data *data = ad7414_update_device(dev);
+	int value = (data->temp_input >> bitnr) & 1;
+	return sprintf(buf, "%d\n", value);
+}
+
+static SENSOR_DEVICE_ATTR(temp1_min_alarm, S_IRUGO, show_alarm, NULL, 3);
+static SENSOR_DEVICE_ATTR(temp1_max_alarm, S_IRUGO, show_alarm, NULL, 4);
+
+static struct attribute *ad7414_attributes[] = {
+	&sensor_dev_attr_temp1_input.dev_attr.attr,
+	&sensor_dev_attr_temp1_max.dev_attr.attr,
+	&sensor_dev_attr_temp1_min.dev_attr.attr,
+	&sensor_dev_attr_temp1_max_alarm.dev_attr.attr,
+	&sensor_dev_attr_temp1_min_alarm.dev_attr.attr,
+	NULL
+};
+
+static const struct attribute_group ad7414_group = {
+	.attrs = ad7414_attributes,
+};
+
+static int ad7414_probe(struct i2c_client *client,
+			const struct i2c_device_id *dev_id)
+{
+	struct ad7414_data *data;
+	int conf;
+	int err = 0;
+
+	if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_BYTE_DATA |
+				     I2C_FUNC_SMBUS_READ_WORD_DATA))
+		goto exit;
+
+	data = kzalloc(sizeof(struct ad7414_data), GFP_KERNEL);
+	if (!data) {
+		err = -ENOMEM;
+		goto exit;
+	}
+
+	i2c_set_clientdata(client, data);
+	mutex_init(&data->lock);
+
+	dev_info(&client->dev, "chip found\n");
+
+	/* Make sure the chip is powered up. */
+	conf = i2c_smbus_read_byte_data(client, AD7414_REG_CONF);
+	if (conf < 0)
+		dev_warn(&client->dev,
+			 "ad7414_probe unable to read config register.\n");
+	else {
+		conf &= ~(1 << 7);
+		i2c_smbus_write_byte_data(client, AD7414_REG_CONF, conf);
+	}
+
+	/* Register sysfs hooks */
+	err = sysfs_create_group(&client->dev.kobj, &ad7414_group);
+	if (err)
+		goto exit_free;
+
+	data->hwmon_dev = hwmon_device_register(&client->dev);
+	if (IS_ERR(data->hwmon_dev)) {
+		err = PTR_ERR(data->hwmon_dev);
+		goto exit_remove;
+	}
+
+	return 0;
+
+exit_remove:
+	sysfs_remove_group(&client->dev.kobj, &ad7414_group);
+exit_free:
+	kfree(data);
+exit:
+	return err;
+}
+
+static int __devexit ad7414_remove(struct i2c_client *client)
+{
+	struct ad7414_data *data = i2c_get_clientdata(client);
+
+	hwmon_device_unregister(data->hwmon_dev);
+	sysfs_remove_group(&client->dev.kobj, &ad7414_group);
+	kfree(data);
+	return 0;
+}
+
+static const struct i2c_device_id ad7414_id[] = {
+	{ "ad7414", 0 },
+	{}
+};
+
+static struct i2c_driver ad7414_driver = {
+	.driver = {
+		.name	= "ad7414",
+	},
+	.probe	= ad7414_probe,
+	.remove	= __devexit_p(ad7414_remove),
+	.id_table = ad7414_id,
+};
+
+static int __init ad7414_init(void)
+{
+	return i2c_add_driver(&ad7414_driver);
+}
+module_init(ad7414_init);
+
+static void __exit ad7414_exit(void)
+{
+	i2c_del_driver(&ad7414_driver);
+}
+module_exit(ad7414_exit);
+
+MODULE_AUTHOR("Stefan Roese <sr at denx.de>, "
+	      "Frank Edelhaeuser <frank.edelhaeuser at spansion.com>");
+
+MODULE_DESCRIPTION("AD7414 driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/hwmon/adcxx.c b/drivers/hwmon/adcxx.c
new file mode 100644
index 000000000000..242294db3db6
--- /dev/null
+++ b/drivers/hwmon/adcxx.c
@@ -0,0 +1,329 @@
+/*
+ * adcxx.c
+ *
+ * The adcxx4s is an AD converter family from National Semiconductor (NS).
+ *
+ * Copyright (c) 2008 Marc Pignat <marc.pignat@hevs.ch>
+ *
+ * The adcxx4s communicates with a host processor via an SPI/Microwire Bus
+ * interface. This driver supports the whole family of devices with name
+ * ADC<bb><c>S<sss>, where
+ * * bb is the resolution in number of bits (8, 10, 12)
+ * * c is the number of channels (1, 2, 4, 8)
+ * * sss is the maximum conversion speed (021 for 200 kSPS, 051 for 500 kSPS
+ *   and 101 for 1 MSPS)
+ *
+ * Complete datasheets are available at National's website here:
+ * http://www.national.com/ds/DC/ADC<bb><c>S<sss>.pdf
+ *
+ * Handling of 8, 10 and 12 bits converters are the same, the
+ * unavailable bits are 0 :)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/device.h>
+#include <linux/err.h>
+#include <linux/sysfs.h>
+#include <linux/hwmon.h>
+#include <linux/hwmon-sysfs.h>
+#include <linux/mutex.h>
+#include <linux/spi/spi.h>
+
+#define DRVNAME		"adcxx"
+
+struct adcxx {
+	struct device *hwmon_dev;
+	struct mutex lock;
+	u32 channels;
+	u32 reference; /* in millivolts */
+};
+
+/* sysfs hook function */
+static ssize_t adcxx_read(struct device *dev,
+		struct device_attribute *devattr, char *buf)
+{
+	struct spi_device *spi = to_spi_device(dev);
+	struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+	struct adcxx *adc = dev_get_drvdata(&spi->dev);
+	u8 tx_buf[2] = { attr->index << 3 }; /* other bits are don't care */
+	u8 rx_buf[2];
+	int status;
+	int value;
+
+	if (mutex_lock_interruptible(&adc->lock))
+		return -ERESTARTSYS;
+
+	status = spi_write_then_read(spi, tx_buf, sizeof(tx_buf),
+					rx_buf, sizeof(rx_buf));
+	if (status < 0) {
+		dev_warn(dev, "spi_write_then_read failed with status %d\n",
+				status);
+		goto out;
+	}
+
+	value = (rx_buf[0] << 8) + rx_buf[1];
+	dev_dbg(dev, "raw value = 0x%x\n", value);
+
+	value = value * adc->reference >> 12;
+	status = sprintf(buf, "%d\n", value);
+out:
+	mutex_unlock(&adc->lock);
+	return status;
+}
+
+static ssize_t adcxx_show_min(struct device *dev,
+		struct device_attribute *devattr, char *buf)
+{
+	/* The minimum reference is 0 for this chip family */
+	return sprintf(buf, "0\n");
+}
+
+static ssize_t adcxx_show_max(struct device *dev,
+		struct device_attribute *devattr, char *buf)
+{
+	struct spi_device *spi = to_spi_device(dev);
+	struct adcxx *adc = dev_get_drvdata(&spi->dev);
+	u32 reference;
+
+	if (mutex_lock_interruptible(&adc->lock))
+		return -ERESTARTSYS;
+
+	reference = adc->reference;
+
+	mutex_unlock(&adc->lock);
+
+	return sprintf(buf, "%d\n", reference);
+}
+
+static ssize_t adcxx_set_max(struct device *dev,
+	struct device_attribute *devattr, const char *buf, size_t count)
+{
+	struct spi_device *spi = to_spi_device(dev);
+	struct adcxx *adc = dev_get_drvdata(&spi->dev);
+	unsigned long value;
+
+	if (strict_strtoul(buf, 10, &value))
+		return -EINVAL;
+
+	if (mutex_lock_interruptible(&adc->lock))
+		return -ERESTARTSYS;
+
+	adc->reference = value;
+
+	mutex_unlock(&adc->lock);
+
+	return count;
+}
+
+static ssize_t adcxx_show_name(struct device *dev, struct device_attribute
+			      *devattr, char *buf)
+{
+	struct spi_device *spi = to_spi_device(dev);
+	struct adcxx *adc = dev_get_drvdata(&spi->dev);
+
+	return sprintf(buf, "adcxx%ds\n", adc->channels);
+}
+
+static struct sensor_device_attribute ad_input[] = {
+	SENSOR_ATTR(name, S_IRUGO, adcxx_show_name, NULL, 0),
+	SENSOR_ATTR(in_min, S_IRUGO, adcxx_show_min, NULL, 0),
+	SENSOR_ATTR(in_max, S_IWUSR | S_IRUGO, adcxx_show_max,
+					adcxx_set_max, 0),
+	SENSOR_ATTR(in0_input, S_IRUGO, adcxx_read, NULL, 0),
+	SENSOR_ATTR(in1_input, S_IRUGO, adcxx_read, NULL, 1),
+	SENSOR_ATTR(in2_input, S_IRUGO, adcxx_read, NULL, 2),
+	SENSOR_ATTR(in3_input, S_IRUGO, adcxx_read, NULL, 3),
+	SENSOR_ATTR(in4_input, S_IRUGO, adcxx_read, NULL, 4),
+	SENSOR_ATTR(in5_input, S_IRUGO, adcxx_read, NULL, 5),
+	SENSOR_ATTR(in6_input, S_IRUGO, adcxx_read, NULL, 6),
+	SENSOR_ATTR(in7_input, S_IRUGO, adcxx_read, NULL, 7),
+};
+
+/*----------------------------------------------------------------------*/
+
+static int __devinit adcxx_probe(struct spi_device *spi, int channels)
+{
+	struct adcxx *adc;
+	int status;
+	int i;
+
+	adc = kzalloc(sizeof *adc, GFP_KERNEL);
+	if (!adc)
+		return -ENOMEM;
+
+	/* set a default value for the reference */
+	adc->reference = 3300;
+	adc->channels = channels;
+	mutex_init(&adc->lock);
+
+	mutex_lock(&adc->lock);
+
+	dev_set_drvdata(&spi->dev, adc);
+
+	for (i = 0; i < 3 + adc->channels; i++) {
+		status = device_create_file(&spi->dev, &ad_input[i].dev_attr);
+		if (status) {
+			dev_err(&spi->dev, "device_create_file failed.\n");
+			goto out_err;
+		}
+	}
+
+	adc->hwmon_dev = hwmon_device_register(&spi->dev);
+	if (IS_ERR(adc->hwmon_dev)) {
+		dev_err(&spi->dev, "hwmon_device_register failed.\n");
+		status = PTR_ERR(adc->hwmon_dev);
+		goto out_err;
+	}
+
+	mutex_unlock(&adc->lock);
+	return 0;
+
+out_err:
+	for (i--; i >= 0; i--)
+		device_remove_file(&spi->dev, &ad_input[i].dev_attr);
+
+	dev_set_drvdata(&spi->dev, NULL);
+	mutex_unlock(&adc->lock);
+	kfree(adc);
+	return status;
+}
+
+static int __devinit adcxx1s_probe(struct spi_device *spi)
+{
+	return adcxx_probe(spi, 1);
+}
+
+static int __devinit adcxx2s_probe(struct spi_device *spi)
+{
+	return adcxx_probe(spi, 2);
+}
+
+static int __devinit adcxx4s_probe(struct spi_device *spi)
+{
+	return adcxx_probe(spi, 4);
+}
+
+static int __devinit adcxx8s_probe(struct spi_device *spi)
+{
+	return adcxx_probe(spi, 8);
+}
+
+static int __devexit adcxx_remove(struct spi_device *spi)
+{
+	struct adcxx *adc = dev_get_drvdata(&spi->dev);
+	int i;
+
+	mutex_lock(&adc->lock);
+	hwmon_device_unregister(adc->hwmon_dev);
+	for (i = 0; i < 3 + adc->channels; i++)
+		device_remove_file(&spi->dev, &ad_input[i].dev_attr);
+
+	dev_set_drvdata(&spi->dev, NULL);
+	mutex_unlock(&adc->lock);
+	kfree(adc);
+
+	return 0;
+}
+
+static struct spi_driver adcxx1s_driver = {
+	.driver = {
+		.name	= "adcxx1s",
+		.owner	= THIS_MODULE,
+	},
+	.probe	= adcxx1s_probe,
+	.remove	= __devexit_p(adcxx_remove),
+};
+
+static struct spi_driver adcxx2s_driver = {
+	.driver = {
+		.name	= "adcxx2s",
+		.owner	= THIS_MODULE,
+	},
+	.probe	= adcxx2s_probe,
+	.remove	= __devexit_p(adcxx_remove),
+};
+
+static struct spi_driver adcxx4s_driver = {
+	.driver = {
+		.name	= "adcxx4s",
+		.owner	= THIS_MODULE,
+	},
+	.probe	= adcxx4s_probe,
+	.remove	= __devexit_p(adcxx_remove),
+};
+
+static struct spi_driver adcxx8s_driver = {
+	.driver = {
+		.name	= "adcxx8s",
+		.owner	= THIS_MODULE,
+	},
+	.probe	= adcxx8s_probe,
+	.remove	= __devexit_p(adcxx_remove),
+};
+
+static int __init init_adcxx(void)
+{
+	int status;
+	status = spi_register_driver(&adcxx1s_driver);
+	if (status)
+		goto reg_1_failed;
+
+	status = spi_register_driver(&adcxx2s_driver);
+	if (status)
+		goto reg_2_failed;
+
+	status = spi_register_driver(&adcxx4s_driver);
+	if (status)
+		goto reg_4_failed;
+
+	status = spi_register_driver(&adcxx8s_driver);
+	if (status)
+		goto reg_8_failed;
+
+	return status;
+
+reg_8_failed:
+	spi_unregister_driver(&adcxx4s_driver);
+reg_4_failed:
+	spi_unregister_driver(&adcxx2s_driver);
+reg_2_failed:
+	spi_unregister_driver(&adcxx1s_driver);
+reg_1_failed:
+	return status;
+}
+
+static void __exit exit_adcxx(void)
+{
+	spi_unregister_driver(&adcxx1s_driver);
+	spi_unregister_driver(&adcxx2s_driver);
+	spi_unregister_driver(&adcxx4s_driver);
+	spi_unregister_driver(&adcxx8s_driver);
+}
+
+module_init(init_adcxx);
+module_exit(exit_adcxx);
+
+MODULE_AUTHOR("Marc Pignat");
+MODULE_DESCRIPTION("National Semiconductor adcxx8sxxx Linux driver");
+MODULE_LICENSE("GPL");
+
+MODULE_ALIAS("adcxx1s");
+MODULE_ALIAS("adcxx2s");
+MODULE_ALIAS("adcxx4s");
+MODULE_ALIAS("adcxx8s");
diff --git a/drivers/hwmon/adt7473.c b/drivers/hwmon/adt7473.c
index ce4a7cb5a116..3a0b63136479 100644
--- a/drivers/hwmon/adt7473.c
+++ b/drivers/hwmon/adt7473.c
@@ -39,32 +39,20 @@ I2C_CLIENT_INSMOD_1(adt7473);
 #define ADT7473_REG_BASE_ADDR			0x20
 
 #define ADT7473_REG_VOLT_BASE_ADDR		0x21
-#define ADT7473_REG_VOLT_MAX_ADDR		0x22
 #define ADT7473_REG_VOLT_MIN_BASE_ADDR		0x46
-#define ADT7473_REG_VOLT_MIN_MAX_ADDR		0x49
 
 #define ADT7473_REG_TEMP_BASE_ADDR		0x25
-#define ADT7473_REG_TEMP_MAX_ADDR		0x27
 #define ADT7473_REG_TEMP_LIMITS_BASE_ADDR	0x4E
-#define ADT7473_REG_TEMP_LIMITS_MAX_ADDR	0x53
 #define ADT7473_REG_TEMP_TMIN_BASE_ADDR		0x67
-#define ADT7473_REG_TEMP_TMIN_MAX_ADDR		0x69
 #define ADT7473_REG_TEMP_TMAX_BASE_ADDR		0x6A
-#define ADT7473_REG_TEMP_TMAX_MAX_ADDR		0x6C
 
 #define ADT7473_REG_FAN_BASE_ADDR		0x28
-#define ADT7473_REG_FAN_MAX_ADDR		0x2F
 #define ADT7473_REG_FAN_MIN_BASE_ADDR		0x54
-#define ADT7473_REG_FAN_MIN_MAX_ADDR		0x5B
 
 #define ADT7473_REG_PWM_BASE_ADDR		0x30
-#define ADT7473_REG_PWM_MAX_ADDR		0x32
 #define	ADT7473_REG_PWM_MIN_BASE_ADDR		0x64
-#define ADT7473_REG_PWM_MIN_MAX_ADDR		0x66
 #define ADT7473_REG_PWM_MAX_BASE_ADDR		0x38
-#define ADT7473_REG_PWM_MAX_MAX_ADDR		0x3A
 #define ADT7473_REG_PWM_BHVR_BASE_ADDR		0x5C
-#define ADT7473_REG_PWM_BHVR_MAX_ADDR		0x5E
 #define		ADT7473_PWM_BHVR_MASK		0xE0
 #define		ADT7473_PWM_BHVR_SHIFT		5
 
@@ -102,7 +90,6 @@ I2C_CLIENT_INSMOD_1(adt7473);
 #define		ADT7473_FAN4_ALARM		0x20
 #define		ADT7473_R1T_SHORT		0x40
 #define		ADT7473_R2T_SHORT		0x80
-#define ADT7473_REG_MAX_ADDR			0x80
 
 #define ALARM2(x)	((x) << 8)
 
@@ -583,10 +570,9 @@ static ssize_t set_max_duty_at_crit(struct device *dev,
 	struct i2c_client *client = to_i2c_client(dev);
 	struct adt7473_data *data = i2c_get_clientdata(client);
 	int temp = simple_strtol(buf, NULL, 10);
-	temp = temp && 0xFF;
 
 	mutex_lock(&data->lock);
-	data->max_duty_at_overheat = temp;
+	data->max_duty_at_overheat = !!temp;
 	reg = i2c_smbus_read_byte_data(client, ADT7473_REG_CFG4);
 	if (temp)
 		reg |= ADT7473_CFG4_MAX_DUTY_AT_OVT;
diff --git a/drivers/hwmon/applesmc.c b/drivers/hwmon/applesmc.c
index aacc0c4b809c..b06b8e090a27 100644
--- a/drivers/hwmon/applesmc.c
+++ b/drivers/hwmon/applesmc.c
@@ -98,6 +98,12 @@ static const char* temperature_sensors_sets[][36] = {
 	  "TH1P", "TH2P", "TH3P", "TMAP", "TMAS", "TMBS", "TM0P", "TM0S",
 	  "TM1P", "TM1S", "TM2P", "TM2S", "TM3S", "TM8P", "TM8S", "TM9P",
 	  "TM9S", "TN0H", "TS0C", NULL },
+/* Set 5: iMac */
+	{ "TC0D", "TA0P", "TG0P", "TG0D", "TG0H", "TH0P", "Tm0P", "TO0P",
+	  "Tp0C", NULL },
+/* Set 6: Macbook3 set */
+	{ "TB0T", "TC0D", "TC0P", "TM0P", "TN0P", "TTF0", "TW0P", "Th0H",
+	  "Th0S", "Th1H", NULL },
 };
 
 /* List of keys used to read/write fan speeds */
@@ -1223,6 +1229,10 @@ static __initdata struct dmi_match_data applesmc_dmi_data[] = {
 	{ .accelerometer = 0, .light = 0, .temperature_set = 3 },
 /* MacPro: temperature set 4 */
 	{ .accelerometer = 0, .light = 0, .temperature_set = 4 },
+/* iMac: temperature set 5 */
+	{ .accelerometer = 0, .light = 0, .temperature_set = 5 },
+/* MacBook3: accelerometer and temperature set 6 */
+	{ .accelerometer = 1, .light = 0, .temperature_set = 6 },
 };
 
 /* Note that DMI_MATCH(...,"MacBook") will match "MacBookPro1,1".
@@ -1232,10 +1242,14 @@ static __initdata struct dmi_system_id applesmc_whitelist[] = {
 	  DMI_MATCH(DMI_BOARD_VENDOR,"Apple"),
 	  DMI_MATCH(DMI_PRODUCT_NAME,"MacBookPro") },
 		(void*)&applesmc_dmi_data[0]},
-	{ applesmc_dmi_match, "Apple MacBook", {
+	{ applesmc_dmi_match, "Apple MacBook (v2)", {
 	  DMI_MATCH(DMI_BOARD_VENDOR,"Apple"),
 	  DMI_MATCH(DMI_PRODUCT_NAME,"MacBook2") },
 		(void*)&applesmc_dmi_data[1]},
+	{ applesmc_dmi_match, "Apple MacBook (v3)", {
+	  DMI_MATCH(DMI_BOARD_VENDOR,"Apple"),
+	  DMI_MATCH(DMI_PRODUCT_NAME,"MacBook3") },
+		(void*)&applesmc_dmi_data[6]},
 	{ applesmc_dmi_match, "Apple MacBook", {
 	  DMI_MATCH(DMI_BOARD_VENDOR,"Apple"),
 	  DMI_MATCH(DMI_PRODUCT_NAME,"MacBook") },
@@ -1248,6 +1262,10 @@ static __initdata struct dmi_system_id applesmc_whitelist[] = {
 	  DMI_MATCH(DMI_BOARD_VENDOR,"Apple"),
 	  DMI_MATCH(DMI_PRODUCT_NAME,"MacPro2") },
 		(void*)&applesmc_dmi_data[4]},
+	{ applesmc_dmi_match, "Apple iMac", {
+	  DMI_MATCH(DMI_BOARD_VENDOR,"Apple"),
+	  DMI_MATCH(DMI_PRODUCT_NAME,"iMac") },
+		(void*)&applesmc_dmi_data[5]},
 	{ .ident = NULL }
 };
 
diff --git a/drivers/hwmon/coretemp.c b/drivers/hwmon/coretemp.c
index 70239acecc8e..93c17223b527 100644
--- a/drivers/hwmon/coretemp.c
+++ b/drivers/hwmon/coretemp.c
@@ -413,10 +413,11 @@ static int __init coretemp_init(void)
 	for_each_online_cpu(i) {
 		struct cpuinfo_x86 *c = &cpu_data(i);
 
-		/* check if family 6, models 0xe, 0xf, 0x16, 0x17 */
+		/* check if family 6, models 0xe, 0xf, 0x16, 0x17, 0x1A */
 		if ((c->cpuid_level < 0) || (c->x86 != 0x6) ||
 		    !((c->x86_model == 0xe) || (c->x86_model == 0xf) ||
-			(c->x86_model == 0x16) || (c->x86_model == 0x17))) {
+			(c->x86_model == 0x16) || (c->x86_model == 0x17) ||
+			(c->x86_model == 0x1A))) {
 
 			/* supported CPU not found, but report the unknown
 			   family 6 CPU */
diff --git a/drivers/hwmon/dme1737.c b/drivers/hwmon/dme1737.c
index 7673f65877e1..cdb8311e4ef7 100644
--- a/drivers/hwmon/dme1737.c
+++ b/drivers/hwmon/dme1737.c
@@ -1,11 +1,11 @@
 /*
- * dme1737.c - Driver for the SMSC DME1737, Asus A8000, and SMSC SCH311x
- *             Super-I/O chips integrated hardware monitoring features.
- * Copyright (c) 2007 Juerg Haefliger <juergh@gmail.com>
+ * dme1737.c - Driver for the SMSC DME1737, Asus A8000, SMSC SCH311x and
+ *             SCH5027 Super-I/O chips integrated hardware monitoring features.
+ * Copyright (c) 2007, 2008 Juerg Haefliger <juergh@gmail.com>
  *
  * This driver is an I2C/ISA hybrid, meaning that it uses the I2C bus to access
- * the chip registers if a DME1737 (or A8000) is found and the ISA bus if a
- * SCH311x chip is found. Both types of chips have very similar hardware
+ * the chip registers if a DME1737, A8000, or SCH5027 is found and the ISA bus
+ * if a SCH311x chip is found. Both types of chips have very similar hardware
  * monitoring capabilities but differ in the way they can be accessed.
  *
  * This program is free software; you can redistribute it and/or modify
@@ -48,11 +48,19 @@ static unsigned short force_id;
 module_param(force_id, ushort, 0);
 MODULE_PARM_DESC(force_id, "Override the detected device ID");
 
+static int probe_all_addr;
+module_param(probe_all_addr, bool, 0);
+MODULE_PARM_DESC(probe_all_addr, "Include probing of non-standard LPC "
+		 "addresses");
+
 /* Addresses to scan */
 static const unsigned short normal_i2c[] = {0x2c, 0x2d, 0x2e, I2C_CLIENT_END};
 
 /* Insmod parameters */
-I2C_CLIENT_INSMOD_1(dme1737);
+I2C_CLIENT_INSMOD_2(dme1737, sch5027);
+
+/* ISA chip types */
+enum isa_chips { sch311x = sch5027 + 1 };
 
 /* ---------------------------------------------------------------------
  * Registers
@@ -158,6 +166,7 @@ static const u8 DME1737_BIT_ALARM_FAN[] = {10, 11, 12, 13, 22, 23};
 #define DME1737_VERSTEP		0x88
 #define DME1737_VERSTEP_MASK	0xf8
 #define SCH311X_DEVICE		0x8c
+#define SCH5027_VERSTEP		0x69
 
 /* Length of ISA address segment */
 #define DME1737_EXTENT	2
@@ -176,6 +185,8 @@ struct dme1737_data {
 	int valid;			/* !=0 if following fields are valid */
 	unsigned long last_update;	/* in jiffies */
 	unsigned long last_vbat;	/* in jiffies */
+	enum chips type;
+	const int *in_nominal;		/* pointer to IN_NOMINAL array */
 
 	u8 vid;
 	u8 pwm_rr_en;
@@ -210,20 +221,27 @@ struct dme1737_data {
 };
 
 /* Nominal voltage values */
-static const int IN_NOMINAL[] = {5000, 2250, 3300, 5000, 12000, 3300, 3300};
+static const int IN_NOMINAL_DME1737[] = {5000, 2250, 3300, 5000, 12000, 3300,
+					 3300};
+static const int IN_NOMINAL_SCH311x[] = {2500, 1500, 3300, 5000, 12000, 3300,
+					 3300};
+static const int IN_NOMINAL_SCH5027[] = {5000, 2250, 3300, 1125, 1125, 3300,
+					 3300};
+#define IN_NOMINAL(type)	((type) == sch311x ? IN_NOMINAL_SCH311x : \
+				 (type) == sch5027 ? IN_NOMINAL_SCH5027 : \
+				 IN_NOMINAL_DME1737)
 
 /* Voltage input
  * Voltage inputs have 16 bits resolution, limit values have 8 bits
  * resolution. */
-static inline int IN_FROM_REG(int reg, int ix, int res)
+static inline int IN_FROM_REG(int reg, int nominal, int res)
 {
-	return (reg * IN_NOMINAL[ix] + (3 << (res - 3))) / (3 << (res - 2));
+	return (reg * nominal + (3 << (res - 3))) / (3 << (res - 2));
 }
 
-static inline int IN_TO_REG(int val, int ix)
+static inline int IN_TO_REG(int val, int nominal)
 {
-	return SENSORS_LIMIT((val * 192 + IN_NOMINAL[ix] / 2) /
-			     IN_NOMINAL[ix], 0, 255);
+	return SENSORS_LIMIT((val * 192 + nominal / 2) / nominal, 0, 255);
 }
 
 /* Temperature input
@@ -552,7 +570,10 @@ static struct dme1737_data *dme1737_update_device(struct device *dev)
 
 	/* Sample register contents every 1 sec */
 	if (time_after(jiffies, data->last_update + HZ) || !data->valid) {
-		data->vid = dme1737_read(client, DME1737_REG_VID) & 0x3f;
+		if (data->type != sch5027) {
+			data->vid = dme1737_read(client, DME1737_REG_VID) &
+				0x3f;
+		}
 
 		/* In (voltage) registers */
 		for (ix = 0; ix < ARRAY_SIZE(data->in); ix++) {
@@ -580,8 +601,10 @@ static struct dme1737_data *dme1737_update_device(struct device *dev)
 					DME1737_REG_TEMP_MIN(ix));
 			data->temp_max[ix] = dme1737_read(client,
 					DME1737_REG_TEMP_MAX(ix));
-			data->temp_offset[ix] = dme1737_read(client,
-					DME1737_REG_TEMP_OFFSET(ix));
+			if (data->type != sch5027) {
+				data->temp_offset[ix] = dme1737_read(client,
+						DME1737_REG_TEMP_OFFSET(ix));
+			}
 		}
 
 		/* In and temp LSB registers
@@ -656,9 +679,11 @@ static struct dme1737_data *dme1737_update_device(struct device *dev)
 			data->zone_abs[ix] = dme1737_read(client,
 					DME1737_REG_ZONE_ABS(ix));
 		}
-		for (ix = 0; ix < ARRAY_SIZE(data->zone_hyst); ix++) {
-			data->zone_hyst[ix] = dme1737_read(client,
+		if (data->type != sch5027) {
+			for (ix = 0; ix < ARRAY_SIZE(data->zone_hyst); ix++) {
+				data->zone_hyst[ix] = dme1737_read(client,
 						DME1737_REG_ZONE_HYST(ix));
+			}
 		}
 
 		/* Alarm registers */
@@ -722,13 +747,13 @@ static ssize_t show_in(struct device *dev, struct device_attribute *attr,
 
 	switch (fn) {
 	case SYS_IN_INPUT:
-		res = IN_FROM_REG(data->in[ix], ix, 16);
+		res = IN_FROM_REG(data->in[ix], data->in_nominal[ix], 16);
 		break;
 	case SYS_IN_MIN:
-		res = IN_FROM_REG(data->in_min[ix], ix, 8);
+		res = IN_FROM_REG(data->in_min[ix], data->in_nominal[ix], 8);
 		break;
 	case SYS_IN_MAX:
-		res = IN_FROM_REG(data->in_max[ix], ix, 8);
+		res = IN_FROM_REG(data->in_max[ix], data->in_nominal[ix], 8);
 		break;
 	case SYS_IN_ALARM:
 		res = (data->alarms >> DME1737_BIT_ALARM_IN[ix]) & 0x01;
@@ -755,12 +780,12 @@ static ssize_t set_in(struct device *dev, struct device_attribute *attr,
 	mutex_lock(&data->update_lock);
 	switch (fn) {
 	case SYS_IN_MIN:
-		data->in_min[ix] = IN_TO_REG(val, ix);
+		data->in_min[ix] = IN_TO_REG(val, data->in_nominal[ix]);
 		dme1737_write(client, DME1737_REG_IN_MIN(ix),
 			      data->in_min[ix]);
 		break;
 	case SYS_IN_MAX:
-		data->in_max[ix] = IN_TO_REG(val, ix);
+		data->in_max[ix] = IN_TO_REG(val, data->in_nominal[ix]);
 		dme1737_write(client, DME1737_REG_IN_MAX(ix),
 			      data->in_max[ix]);
 		break;
@@ -1153,7 +1178,7 @@ static ssize_t show_pwm(struct device *dev, struct device_attribute *attr,
 	return sprintf(buf, "%d\n", res);
 }
 
-static struct attribute *dme1737_attr_pwm[];
+static struct attribute *dme1737_pwm_chmod_attr[];
 static void dme1737_chmod_file(struct device*, struct attribute*, mode_t);
 
 static ssize_t set_pwm(struct device *dev, struct device_attribute *attr,
@@ -1217,7 +1242,7 @@ static ssize_t set_pwm(struct device *dev, struct device_attribute *attr,
 		switch (val) {
 		case 0:
 			/* Change permissions of pwm[ix] to read-only */
-			dme1737_chmod_file(dev, dme1737_attr_pwm[ix],
+			dme1737_chmod_file(dev, dme1737_pwm_chmod_attr[ix],
 					   S_IRUGO);
 			/* Turn fan fully on */
 			data->pwm_config[ix] = PWM_EN_TO_REG(0,
@@ -1232,12 +1257,12 @@ static ssize_t set_pwm(struct device *dev, struct device_attribute *attr,
 			dme1737_write(client, DME1737_REG_PWM_CONFIG(ix),
 				      data->pwm_config[ix]);
 			/* Change permissions of pwm[ix] to read-writeable */
-			dme1737_chmod_file(dev, dme1737_attr_pwm[ix],
+			dme1737_chmod_file(dev, dme1737_pwm_chmod_attr[ix],
 					   S_IRUGO | S_IWUSR);
 			break;
 		case 2:
 			/* Change permissions of pwm[ix] to read-only */
-			dme1737_chmod_file(dev, dme1737_attr_pwm[ix],
+			dme1737_chmod_file(dev, dme1737_pwm_chmod_attr[ix],
 					   S_IRUGO);
 			/* Turn on auto mode using the saved zone channel
 			 * assignment */
@@ -1501,9 +1526,9 @@ SENSOR_DEVICE_ATTR_PWM_1TO3(3);
 /* PWMs 5-6 */
 
 #define SENSOR_DEVICE_ATTR_PWM_5TO6(ix) \
-static SENSOR_DEVICE_ATTR_2(pwm##ix, S_IRUGO | S_IWUSR, \
+static SENSOR_DEVICE_ATTR_2(pwm##ix, S_IRUGO, \
 	show_pwm, set_pwm, SYS_PWM, ix-1); \
-static SENSOR_DEVICE_ATTR_2(pwm##ix##_freq, S_IRUGO | S_IWUSR, \
+static SENSOR_DEVICE_ATTR_2(pwm##ix##_freq, S_IRUGO, \
 	show_pwm, set_pwm, SYS_PWM_FREQ, ix-1); \
 static SENSOR_DEVICE_ATTR_2(pwm##ix##_enable, S_IRUGO, \
 	show_pwm, NULL, SYS_PWM_ENABLE, ix-1)
@@ -1517,225 +1542,286 @@ static DEVICE_ATTR(vrm, S_IRUGO | S_IWUSR, show_vrm, set_vrm);
 static DEVICE_ATTR(cpu0_vid, S_IRUGO, show_vid, NULL);
 static DEVICE_ATTR(name, S_IRUGO, show_name, NULL);   /* for ISA devices */
 
-#define SENSOR_DEV_ATTR_IN(ix) \
-&sensor_dev_attr_in##ix##_input.dev_attr.attr, \
-&sensor_dev_attr_in##ix##_min.dev_attr.attr, \
-&sensor_dev_attr_in##ix##_max.dev_attr.attr, \
-&sensor_dev_attr_in##ix##_alarm.dev_attr.attr
-
-/* These attributes are read-writeable only if the chip is *not* locked */
-#define SENSOR_DEV_ATTR_TEMP_LOCK(ix) \
-&sensor_dev_attr_temp##ix##_offset.dev_attr.attr
-
-#define SENSOR_DEV_ATTR_TEMP(ix) \
-SENSOR_DEV_ATTR_TEMP_LOCK(ix), \
-&sensor_dev_attr_temp##ix##_input.dev_attr.attr, \
-&sensor_dev_attr_temp##ix##_min.dev_attr.attr, \
-&sensor_dev_attr_temp##ix##_max.dev_attr.attr, \
-&sensor_dev_attr_temp##ix##_alarm.dev_attr.attr, \
-&sensor_dev_attr_temp##ix##_fault.dev_attr.attr
-
-/* These attributes are read-writeable only if the chip is *not* locked */
-#define SENSOR_DEV_ATTR_ZONE_LOCK(ix) \
-&sensor_dev_attr_zone##ix##_auto_point1_temp_hyst.dev_attr.attr, \
-&sensor_dev_attr_zone##ix##_auto_point1_temp.dev_attr.attr, \
-&sensor_dev_attr_zone##ix##_auto_point2_temp.dev_attr.attr, \
-&sensor_dev_attr_zone##ix##_auto_point3_temp.dev_attr.attr
-
-#define SENSOR_DEV_ATTR_ZONE(ix) \
-SENSOR_DEV_ATTR_ZONE_LOCK(ix), \
-&sensor_dev_attr_zone##ix##_auto_channels_temp.dev_attr.attr
-
-#define SENSOR_DEV_ATTR_FAN_1TO4(ix) \
-&sensor_dev_attr_fan##ix##_input.dev_attr.attr, \
-&sensor_dev_attr_fan##ix##_min.dev_attr.attr, \
-&sensor_dev_attr_fan##ix##_alarm.dev_attr.attr, \
-&sensor_dev_attr_fan##ix##_type.dev_attr.attr
-
-#define SENSOR_DEV_ATTR_FAN_5TO6(ix) \
-&sensor_dev_attr_fan##ix##_input.dev_attr.attr, \
-&sensor_dev_attr_fan##ix##_min.dev_attr.attr, \
-&sensor_dev_attr_fan##ix##_alarm.dev_attr.attr, \
-&sensor_dev_attr_fan##ix##_max.dev_attr.attr
-
-/* These attributes are read-writeable only if the chip is *not* locked */
-#define SENSOR_DEV_ATTR_PWM_1TO3_LOCK(ix) \
-&sensor_dev_attr_pwm##ix##_freq.dev_attr.attr, \
-&sensor_dev_attr_pwm##ix##_enable.dev_attr.attr, \
-&sensor_dev_attr_pwm##ix##_ramp_rate.dev_attr.attr, \
-&sensor_dev_attr_pwm##ix##_auto_channels_zone.dev_attr.attr, \
-&sensor_dev_attr_pwm##ix##_auto_pwm_min.dev_attr.attr, \
-&sensor_dev_attr_pwm##ix##_auto_point1_pwm.dev_attr.attr
-
-#define SENSOR_DEV_ATTR_PWM_1TO3(ix) \
-SENSOR_DEV_ATTR_PWM_1TO3_LOCK(ix), \
-&sensor_dev_attr_pwm##ix.dev_attr.attr, \
-&sensor_dev_attr_pwm##ix##_auto_point2_pwm.dev_attr.attr
-
-/* These attributes are read-writeable only if the chip is *not* locked */
-#define SENSOR_DEV_ATTR_PWM_5TO6_LOCK(ix) \
-&sensor_dev_attr_pwm##ix.dev_attr.attr, \
-&sensor_dev_attr_pwm##ix##_freq.dev_attr.attr
-
-#define SENSOR_DEV_ATTR_PWM_5TO6(ix) \
-SENSOR_DEV_ATTR_PWM_5TO6_LOCK(ix), \
-&sensor_dev_attr_pwm##ix##_enable.dev_attr.attr
-
 /* This struct holds all the attributes that are always present and need to be
  * created unconditionally. The attributes that need modification of their
  * permissions are created read-only and write permissions are added or removed
  * on the fly when required */
 static struct attribute *dme1737_attr[] ={
 	/* Voltages */
-	SENSOR_DEV_ATTR_IN(0),
-	SENSOR_DEV_ATTR_IN(1),
-	SENSOR_DEV_ATTR_IN(2),
-	SENSOR_DEV_ATTR_IN(3),
-	SENSOR_DEV_ATTR_IN(4),
-	SENSOR_DEV_ATTR_IN(5),
-	SENSOR_DEV_ATTR_IN(6),
+	&sensor_dev_attr_in0_input.dev_attr.attr,
+	&sensor_dev_attr_in0_min.dev_attr.attr,
+	&sensor_dev_attr_in0_max.dev_attr.attr,
+	&sensor_dev_attr_in0_alarm.dev_attr.attr,
+	&sensor_dev_attr_in1_input.dev_attr.attr,
+	&sensor_dev_attr_in1_min.dev_attr.attr,
+	&sensor_dev_attr_in1_max.dev_attr.attr,
+	&sensor_dev_attr_in1_alarm.dev_attr.attr,
+	&sensor_dev_attr_in2_input.dev_attr.attr,
+	&sensor_dev_attr_in2_min.dev_attr.attr,
+	&sensor_dev_attr_in2_max.dev_attr.attr,
+	&sensor_dev_attr_in2_alarm.dev_attr.attr,
+	&sensor_dev_attr_in3_input.dev_attr.attr,
+	&sensor_dev_attr_in3_min.dev_attr.attr,
+	&sensor_dev_attr_in3_max.dev_attr.attr,
+	&sensor_dev_attr_in3_alarm.dev_attr.attr,
+	&sensor_dev_attr_in4_input.dev_attr.attr,
+	&sensor_dev_attr_in4_min.dev_attr.attr,
+	&sensor_dev_attr_in4_max.dev_attr.attr,
+	&sensor_dev_attr_in4_alarm.dev_attr.attr,
+	&sensor_dev_attr_in5_input.dev_attr.attr,
+	&sensor_dev_attr_in5_min.dev_attr.attr,
+	&sensor_dev_attr_in5_max.dev_attr.attr,
+	&sensor_dev_attr_in5_alarm.dev_attr.attr,
+	&sensor_dev_attr_in6_input.dev_attr.attr,
+	&sensor_dev_attr_in6_min.dev_attr.attr,
+	&sensor_dev_attr_in6_max.dev_attr.attr,
+	&sensor_dev_attr_in6_alarm.dev_attr.attr,
+	/* Temperatures */
+	&sensor_dev_attr_temp1_input.dev_attr.attr,
+	&sensor_dev_attr_temp1_min.dev_attr.attr,
+	&sensor_dev_attr_temp1_max.dev_attr.attr,
+	&sensor_dev_attr_temp1_alarm.dev_attr.attr,
+	&sensor_dev_attr_temp1_fault.dev_attr.attr,
+	&sensor_dev_attr_temp2_input.dev_attr.attr,
+	&sensor_dev_attr_temp2_min.dev_attr.attr,
+	&sensor_dev_attr_temp2_max.dev_attr.attr,
+	&sensor_dev_attr_temp2_alarm.dev_attr.attr,
+	&sensor_dev_attr_temp2_fault.dev_attr.attr,
+	&sensor_dev_attr_temp3_input.dev_attr.attr,
+	&sensor_dev_attr_temp3_min.dev_attr.attr,
+	&sensor_dev_attr_temp3_max.dev_attr.attr,
+	&sensor_dev_attr_temp3_alarm.dev_attr.attr,
+	&sensor_dev_attr_temp3_fault.dev_attr.attr,
+	/* Zones */
+	&sensor_dev_attr_zone1_auto_point1_temp.dev_attr.attr,
+	&sensor_dev_attr_zone1_auto_point2_temp.dev_attr.attr,
+	&sensor_dev_attr_zone1_auto_point3_temp.dev_attr.attr,
+	&sensor_dev_attr_zone1_auto_channels_temp.dev_attr.attr,
+	&sensor_dev_attr_zone2_auto_point1_temp.dev_attr.attr,
+	&sensor_dev_attr_zone2_auto_point2_temp.dev_attr.attr,
+	&sensor_dev_attr_zone2_auto_point3_temp.dev_attr.attr,
+	&sensor_dev_attr_zone2_auto_channels_temp.dev_attr.attr,
+	&sensor_dev_attr_zone3_auto_point1_temp.dev_attr.attr,
+	&sensor_dev_attr_zone3_auto_point2_temp.dev_attr.attr,
+	&sensor_dev_attr_zone3_auto_point3_temp.dev_attr.attr,
+	&sensor_dev_attr_zone3_auto_channels_temp.dev_attr.attr,
+	NULL
+};
+
+static const struct attribute_group dme1737_group = {
+	.attrs = dme1737_attr,
+};
+
+/* The following struct holds misc attributes, which are not available in all
+ * chips. Their creation depends on the chip type which is determined during
+ * module load. */
+static struct attribute *dme1737_misc_attr[] = {
 	/* Temperatures */
-	SENSOR_DEV_ATTR_TEMP(1),
-	SENSOR_DEV_ATTR_TEMP(2),
-	SENSOR_DEV_ATTR_TEMP(3),
+	&sensor_dev_attr_temp1_offset.dev_attr.attr,
+	&sensor_dev_attr_temp2_offset.dev_attr.attr,
+	&sensor_dev_attr_temp3_offset.dev_attr.attr,
 	/* Zones */
-	SENSOR_DEV_ATTR_ZONE(1),
-	SENSOR_DEV_ATTR_ZONE(2),
-	SENSOR_DEV_ATTR_ZONE(3),
+	&sensor_dev_attr_zone1_auto_point1_temp_hyst.dev_attr.attr,
+	&sensor_dev_attr_zone2_auto_point1_temp_hyst.dev_attr.attr,
+	&sensor_dev_attr_zone3_auto_point1_temp_hyst.dev_attr.attr,
 	/* Misc */
 	&dev_attr_vrm.attr,
 	&dev_attr_cpu0_vid.attr,
 	NULL
 };
 
-static const struct attribute_group dme1737_group = {
-	.attrs = dme1737_attr,
+static const struct attribute_group dme1737_misc_group = {
+	.attrs = dme1737_misc_attr,
 };
 
 /* The following structs hold the PWM attributes, some of which are optional.
  * Their creation depends on the chip configuration which is determined during
  * module load. */
-static struct attribute *dme1737_attr_pwm1[] = {
-	SENSOR_DEV_ATTR_PWM_1TO3(1),
+static struct attribute *dme1737_pwm1_attr[] = {
+	&sensor_dev_attr_pwm1.dev_attr.attr,
+	&sensor_dev_attr_pwm1_freq.dev_attr.attr,
+	&sensor_dev_attr_pwm1_enable.dev_attr.attr,
+	&sensor_dev_attr_pwm1_ramp_rate.dev_attr.attr,
+	&sensor_dev_attr_pwm1_auto_channels_zone.dev_attr.attr,
+	&sensor_dev_attr_pwm1_auto_point1_pwm.dev_attr.attr,
+	&sensor_dev_attr_pwm1_auto_point2_pwm.dev_attr.attr,
 	NULL
 };
-static struct attribute *dme1737_attr_pwm2[] = {
-	SENSOR_DEV_ATTR_PWM_1TO3(2),
+static struct attribute *dme1737_pwm2_attr[] = {
+	&sensor_dev_attr_pwm2.dev_attr.attr,
+	&sensor_dev_attr_pwm2_freq.dev_attr.attr,
+	&sensor_dev_attr_pwm2_enable.dev_attr.attr,
+	&sensor_dev_attr_pwm2_ramp_rate.dev_attr.attr,
+	&sensor_dev_attr_pwm2_auto_channels_zone.dev_attr.attr,
+	&sensor_dev_attr_pwm2_auto_point1_pwm.dev_attr.attr,
+	&sensor_dev_attr_pwm2_auto_point2_pwm.dev_attr.attr,
 	NULL
 };
-static struct attribute *dme1737_attr_pwm3[] = {
-	SENSOR_DEV_ATTR_PWM_1TO3(3),
+static struct attribute *dme1737_pwm3_attr[] = {
+	&sensor_dev_attr_pwm3.dev_attr.attr,
+	&sensor_dev_attr_pwm3_freq.dev_attr.attr,
+	&sensor_dev_attr_pwm3_enable.dev_attr.attr,
+	&sensor_dev_attr_pwm3_ramp_rate.dev_attr.attr,
+	&sensor_dev_attr_pwm3_auto_channels_zone.dev_attr.attr,
+	&sensor_dev_attr_pwm3_auto_point1_pwm.dev_attr.attr,
+	&sensor_dev_attr_pwm3_auto_point2_pwm.dev_attr.attr,
 	NULL
 };
-static struct attribute *dme1737_attr_pwm5[] = {
-	SENSOR_DEV_ATTR_PWM_5TO6(5),
+static struct attribute *dme1737_pwm5_attr[] = {
+	&sensor_dev_attr_pwm5.dev_attr.attr,
+	&sensor_dev_attr_pwm5_freq.dev_attr.attr,
+	&sensor_dev_attr_pwm5_enable.dev_attr.attr,
 	NULL
 };
-static struct attribute *dme1737_attr_pwm6[] = {
-	SENSOR_DEV_ATTR_PWM_5TO6(6),
+static struct attribute *dme1737_pwm6_attr[] = {
+	&sensor_dev_attr_pwm6.dev_attr.attr,
+	&sensor_dev_attr_pwm6_freq.dev_attr.attr,
+	&sensor_dev_attr_pwm6_enable.dev_attr.attr,
 	NULL
 };
 
 static const struct attribute_group dme1737_pwm_group[] = {
-	{ .attrs = dme1737_attr_pwm1 },
-	{ .attrs = dme1737_attr_pwm2 },
-	{ .attrs = dme1737_attr_pwm3 },
+	{ .attrs = dme1737_pwm1_attr },
+	{ .attrs = dme1737_pwm2_attr },
+	{ .attrs = dme1737_pwm3_attr },
 	{ .attrs = NULL },
-	{ .attrs = dme1737_attr_pwm5 },
-	{ .attrs = dme1737_attr_pwm6 },
+	{ .attrs = dme1737_pwm5_attr },
+	{ .attrs = dme1737_pwm6_attr },
+};
+
+/* The following struct holds misc PWM attributes, which are not available in
+ * all chips. Their creation depends on the chip type which is determined
+ * during module load. */
+static struct attribute *dme1737_pwm_misc_attr[] = {
+	&sensor_dev_attr_pwm1_auto_pwm_min.dev_attr.attr,
+	&sensor_dev_attr_pwm2_auto_pwm_min.dev_attr.attr,
+	&sensor_dev_attr_pwm3_auto_pwm_min.dev_attr.attr,
 };
 
 /* The following structs hold the fan attributes, some of which are optional.
  * Their creation depends on the chip configuration which is determined during
  * module load. */
-static struct attribute *dme1737_attr_fan1[] = {
-	SENSOR_DEV_ATTR_FAN_1TO4(1),
+static struct attribute *dme1737_fan1_attr[] = {
+	&sensor_dev_attr_fan1_input.dev_attr.attr,
+	&sensor_dev_attr_fan1_min.dev_attr.attr,
+	&sensor_dev_attr_fan1_alarm.dev_attr.attr,
+	&sensor_dev_attr_fan1_type.dev_attr.attr,
 	NULL
 };
-static struct attribute *dme1737_attr_fan2[] = {
-	SENSOR_DEV_ATTR_FAN_1TO4(2),
+static struct attribute *dme1737_fan2_attr[] = {
+	&sensor_dev_attr_fan2_input.dev_attr.attr,
+	&sensor_dev_attr_fan2_min.dev_attr.attr,
+	&sensor_dev_attr_fan2_alarm.dev_attr.attr,
+	&sensor_dev_attr_fan2_type.dev_attr.attr,
 	NULL
 };
-static struct attribute *dme1737_attr_fan3[] = {
-	SENSOR_DEV_ATTR_FAN_1TO4(3),
+static struct attribute *dme1737_fan3_attr[] = {
+	&sensor_dev_attr_fan3_input.dev_attr.attr,
+	&sensor_dev_attr_fan3_min.dev_attr.attr,
+	&sensor_dev_attr_fan3_alarm.dev_attr.attr,
+	&sensor_dev_attr_fan3_type.dev_attr.attr,
 	NULL
 };
-static struct attribute *dme1737_attr_fan4[] = {
-	SENSOR_DEV_ATTR_FAN_1TO4(4),
+static struct attribute *dme1737_fan4_attr[] = {
+	&sensor_dev_attr_fan4_input.dev_attr.attr,
+	&sensor_dev_attr_fan4_min.dev_attr.attr,
+	&sensor_dev_attr_fan4_alarm.dev_attr.attr,
+	&sensor_dev_attr_fan4_type.dev_attr.attr,
 	NULL
 };
-static struct attribute *dme1737_attr_fan5[] = {
-	SENSOR_DEV_ATTR_FAN_5TO6(5),
+static struct attribute *dme1737_fan5_attr[] = {
+	&sensor_dev_attr_fan5_input.dev_attr.attr,
+	&sensor_dev_attr_fan5_min.dev_attr.attr,
+	&sensor_dev_attr_fan5_alarm.dev_attr.attr,
+	&sensor_dev_attr_fan5_max.dev_attr.attr,
 	NULL
 };
-static struct attribute *dme1737_attr_fan6[] = {
-	SENSOR_DEV_ATTR_FAN_5TO6(6),
+static struct attribute *dme1737_fan6_attr[] = {
+	&sensor_dev_attr_fan6_input.dev_attr.attr,
+	&sensor_dev_attr_fan6_min.dev_attr.attr,
+	&sensor_dev_attr_fan6_alarm.dev_attr.attr,
+	&sensor_dev_attr_fan6_max.dev_attr.attr,
 	NULL
 };
 
 static const struct attribute_group dme1737_fan_group[] = {
-	{ .attrs = dme1737_attr_fan1 },
-	{ .attrs = dme1737_attr_fan2 },
-	{ .attrs = dme1737_attr_fan3 },
-	{ .attrs = dme1737_attr_fan4 },
-	{ .attrs = dme1737_attr_fan5 },
-	{ .attrs = dme1737_attr_fan6 },
+	{ .attrs = dme1737_fan1_attr },
+	{ .attrs = dme1737_fan2_attr },
+	{ .attrs = dme1737_fan3_attr },
+	{ .attrs = dme1737_fan4_attr },
+	{ .attrs = dme1737_fan5_attr },
+	{ .attrs = dme1737_fan6_attr },
 };
 
-/* The permissions of all of the following attributes are changed to read-
+/* The permissions of the following zone attributes are changed to read-
  * writeable if the chip is *not* locked. Otherwise they stay read-only. */
-static struct attribute *dme1737_attr_lock[] = {
-	/* Temperatures */
-	SENSOR_DEV_ATTR_TEMP_LOCK(1),
-	SENSOR_DEV_ATTR_TEMP_LOCK(2),
-	SENSOR_DEV_ATTR_TEMP_LOCK(3),
-	/* Zones */
-	SENSOR_DEV_ATTR_ZONE_LOCK(1),
-	SENSOR_DEV_ATTR_ZONE_LOCK(2),
-	SENSOR_DEV_ATTR_ZONE_LOCK(3),
+static struct attribute *dme1737_zone_chmod_attr[] = {
+	&sensor_dev_attr_zone1_auto_point1_temp.dev_attr.attr,
+	&sensor_dev_attr_zone1_auto_point2_temp.dev_attr.attr,
+	&sensor_dev_attr_zone1_auto_point3_temp.dev_attr.attr,
+	&sensor_dev_attr_zone2_auto_point1_temp.dev_attr.attr,
+	&sensor_dev_attr_zone2_auto_point2_temp.dev_attr.attr,
+	&sensor_dev_attr_zone2_auto_point3_temp.dev_attr.attr,
+	&sensor_dev_attr_zone3_auto_point1_temp.dev_attr.attr,
+	&sensor_dev_attr_zone3_auto_point2_temp.dev_attr.attr,
+	&sensor_dev_attr_zone3_auto_point3_temp.dev_attr.attr,
 	NULL
 };
 
-static const struct attribute_group dme1737_lock_group = {
-	.attrs = dme1737_attr_lock,
+static const struct attribute_group dme1737_zone_chmod_group = {
+	.attrs = dme1737_zone_chmod_attr,
 };
 
 /* The permissions of the following PWM attributes are changed to read-
  * writeable if the chip is *not* locked and the respective PWM is available.
  * Otherwise they stay read-only. */
-static struct attribute *dme1737_attr_pwm1_lock[] = {
-	SENSOR_DEV_ATTR_PWM_1TO3_LOCK(1),
+static struct attribute *dme1737_pwm1_chmod_attr[] = {
+	&sensor_dev_attr_pwm1_freq.dev_attr.attr,
+	&sensor_dev_attr_pwm1_enable.dev_attr.attr,
+	&sensor_dev_attr_pwm1_ramp_rate.dev_attr.attr,
+	&sensor_dev_attr_pwm1_auto_channels_zone.dev_attr.attr,
+	&sensor_dev_attr_pwm1_auto_point1_pwm.dev_attr.attr,
 	NULL
 };
-static struct attribute *dme1737_attr_pwm2_lock[] = {
-	SENSOR_DEV_ATTR_PWM_1TO3_LOCK(2),
+static struct attribute *dme1737_pwm2_chmod_attr[] = {
+	&sensor_dev_attr_pwm2_freq.dev_attr.attr,
+	&sensor_dev_attr_pwm2_enable.dev_attr.attr,
+	&sensor_dev_attr_pwm2_ramp_rate.dev_attr.attr,
+	&sensor_dev_attr_pwm2_auto_channels_zone.dev_attr.attr,
+	&sensor_dev_attr_pwm2_auto_point1_pwm.dev_attr.attr,
 	NULL
 };
-static struct attribute *dme1737_attr_pwm3_lock[] = {
-	SENSOR_DEV_ATTR_PWM_1TO3_LOCK(3),
+static struct attribute *dme1737_pwm3_chmod_attr[] = {
+	&sensor_dev_attr_pwm3_freq.dev_attr.attr,
+	&sensor_dev_attr_pwm3_enable.dev_attr.attr,
+	&sensor_dev_attr_pwm3_ramp_rate.dev_attr.attr,
+	&sensor_dev_attr_pwm3_auto_channels_zone.dev_attr.attr,
+	&sensor_dev_attr_pwm3_auto_point1_pwm.dev_attr.attr,
 	NULL
 };
-static struct attribute *dme1737_attr_pwm5_lock[] = {
-	SENSOR_DEV_ATTR_PWM_5TO6_LOCK(5),
+static struct attribute *dme1737_pwm5_chmod_attr[] = {
+	&sensor_dev_attr_pwm5.dev_attr.attr,
+	&sensor_dev_attr_pwm5_freq.dev_attr.attr,
 	NULL
 };
-static struct attribute *dme1737_attr_pwm6_lock[] = {
-	SENSOR_DEV_ATTR_PWM_5TO6_LOCK(6),
+static struct attribute *dme1737_pwm6_chmod_attr[] = {
+	&sensor_dev_attr_pwm6.dev_attr.attr,
+	&sensor_dev_attr_pwm6_freq.dev_attr.attr,
 	NULL
 };
 
-static const struct attribute_group dme1737_pwm_lock_group[] = {
-	{ .attrs = dme1737_attr_pwm1_lock },
-	{ .attrs = dme1737_attr_pwm2_lock },
-	{ .attrs = dme1737_attr_pwm3_lock },
+static const struct attribute_group dme1737_pwm_chmod_group[] = {
+	{ .attrs = dme1737_pwm1_chmod_attr },
+	{ .attrs = dme1737_pwm2_chmod_attr },
+	{ .attrs = dme1737_pwm3_chmod_attr },
 	{ .attrs = NULL },
-	{ .attrs = dme1737_attr_pwm5_lock },
-	{ .attrs = dme1737_attr_pwm6_lock },
+	{ .attrs = dme1737_pwm5_chmod_attr },
+	{ .attrs = dme1737_pwm6_chmod_attr },
 };
 
 /* Pwm[1-3] are read-writeable if the associated pwm is in manual mode and the
  * chip is not locked. Otherwise they are read-only. */
-static struct attribute *dme1737_attr_pwm[] = {
+static struct attribute *dme1737_pwm_chmod_attr[] = {
 	&sensor_dev_attr_pwm1.dev_attr.attr,
 	&sensor_dev_attr_pwm2.dev_attr.attr,
 	&sensor_dev_attr_pwm3.dev_attr.attr,
@@ -1809,9 +1895,17 @@ static void dme1737_remove_files(struct device *dev)
 		if (data->has_pwm & (1 << ix)) {
 			sysfs_remove_group(&dev->kobj,
 					   &dme1737_pwm_group[ix]);
+			if (data->type != sch5027 && ix < 3) {
+				sysfs_remove_file(&dev->kobj,
+						  dme1737_pwm_misc_attr[ix]);
+			}
 		}
 	}
 
+	if (data->type != sch5027) {
+		sysfs_remove_group(&dev->kobj, &dme1737_misc_group);
+	}
+
 	sysfs_remove_group(&dev->kobj, &dme1737_group);
 
 	if (!data->client.driver) {
@@ -1835,6 +1929,13 @@ static int dme1737_create_files(struct device *dev)
 		goto exit_remove;
 	}
 
+	/* Create misc sysfs attributes */
+	if ((data->type != sch5027) &&
+	    (err = sysfs_create_group(&dev->kobj,
+				      &dme1737_misc_group))) {
+		goto exit_remove;
+	}
+
 	/* Create fan sysfs attributes */
 	for (ix = 0; ix < ARRAY_SIZE(dme1737_fan_group); ix++) {
 		if (data->has_fan & (1 << ix)) {
@@ -1852,6 +1953,11 @@ static int dme1737_create_files(struct device *dev)
 						&dme1737_pwm_group[ix]))) {
 				goto exit_remove;
 			}
+			if (data->type != sch5027 && ix < 3 &&
+			    (err = sysfs_create_file(&dev->kobj,
+						dme1737_pwm_misc_attr[ix]))) {
+				goto exit_remove;
+			}
 		}
 	}
 
@@ -1861,16 +1967,27 @@ static int dme1737_create_files(struct device *dev)
 		dev_info(dev, "Device is locked. Some attributes "
 			 "will be read-only.\n");
 	} else {
-		/* Change permissions of standard attributes */
-		dme1737_chmod_group(dev, &dme1737_lock_group,
+		/* Change permissions of zone sysfs attributes */
+		dme1737_chmod_group(dev, &dme1737_zone_chmod_group,
 				    S_IRUGO | S_IWUSR);
 
-		/* Change permissions of PWM attributes */
-		for (ix = 0; ix < ARRAY_SIZE(dme1737_pwm_lock_group); ix++) {
+		/* Change permissions of misc sysfs attributes */
+		if (data->type != sch5027) {
+			dme1737_chmod_group(dev, &dme1737_misc_group,
+					    S_IRUGO | S_IWUSR);
+		}
+
+		/* Change permissions of PWM sysfs attributes */
+		for (ix = 0; ix < ARRAY_SIZE(dme1737_pwm_chmod_group); ix++) {
 			if (data->has_pwm & (1 << ix)) {
 				dme1737_chmod_group(dev,
-						&dme1737_pwm_lock_group[ix],
+						&dme1737_pwm_chmod_group[ix],
+						S_IRUGO | S_IWUSR);
+				if (data->type != sch5027 && ix < 3) {
+					dme1737_chmod_file(dev,
+						dme1737_pwm_misc_attr[ix],
 						S_IRUGO | S_IWUSR);
+				}
 			}
 		}
 
@@ -1879,7 +1996,7 @@ static int dme1737_create_files(struct device *dev)
 			if ((data->has_pwm & (1 << ix)) &&
 			    (PWM_EN_FROM_REG(data->pwm_config[ix]) == 1)) {
 				dme1737_chmod_file(dev,
-						dme1737_attr_pwm[ix],
+						dme1737_pwm_chmod_attr[ix],
 						S_IRUGO | S_IWUSR);
 			}
 		}
@@ -1900,6 +2017,9 @@ static int dme1737_init_device(struct device *dev)
 	int ix;
 	u8 reg;
 
+	/* Point to the right nominal voltages array */
+	data->in_nominal = IN_NOMINAL(data->type);
+
 	data->config = dme1737_read(client, DME1737_REG_CONFIG);
 	/* Inform if part is not monitoring/started */
 	if (!(data->config & 0x01)) {
@@ -2010,7 +2130,9 @@ static int dme1737_init_device(struct device *dev)
 	data->pwm_acz[2] = 4;	/* pwm3 -> zone3 */
 
 	/* Set VRM */
-	data->vrm = vid_which_vrm();
+	if (data->type != sch5027) {
+		data->vrm = vid_which_vrm();
+	}
 
 	return 0;
 }
@@ -2029,9 +2151,10 @@ static int dme1737_i2c_get_features(int sio_cip, struct dme1737_data *data)
 	dme1737_sio_enter(sio_cip);
 
 	/* Check device ID
-	 * The DME1737 can return either 0x78 or 0x77 as its device ID. */
+	 * The DME1737 can return either 0x78 or 0x77 as its device ID.
+	 * The SCH5027 returns 0x89 as its device ID. */
 	reg = force_id ? force_id : dme1737_sio_inb(sio_cip, 0x20);
-	if (!(reg == 0x77 || reg == 0x78)) {
+	if (!(reg == 0x77 || reg == 0x78 || reg == 0x89)) {
 		err = -ENODEV;
 		goto exit;
 	}
@@ -2100,15 +2223,25 @@ static int dme1737_i2c_detect(struct i2c_adapter *adapter, int address,
 		company = dme1737_read(client, DME1737_REG_COMPANY);
 		verstep = dme1737_read(client, DME1737_REG_VERSTEP);
 
-		if (!((company == DME1737_COMPANY_SMSC) &&
-		      ((verstep & DME1737_VERSTEP_MASK) == DME1737_VERSTEP))) {
+		if (company == DME1737_COMPANY_SMSC &&
+		    (verstep & DME1737_VERSTEP_MASK) == DME1737_VERSTEP) {
+			kind = dme1737;
+		} else if (company == DME1737_COMPANY_SMSC &&
+			   verstep == SCH5027_VERSTEP) {
+			kind = sch5027;
+		} else {
 			err = -ENODEV;
 			goto exit_kfree;
 		}
 	}
 
-	kind = dme1737;
-	name = "dme1737";
+	if (kind == sch5027) {
+		name = "sch5027";
+	} else {
+		kind = dme1737;
+		name = "dme1737";
+	}
+	data->type = kind;
 
 	/* Fill in the remaining client fields and put it into the global
 	 * list */
@@ -2120,8 +2253,9 @@ static int dme1737_i2c_detect(struct i2c_adapter *adapter, int address,
 		goto exit_kfree;
 	}
 
-	dev_info(dev, "Found a DME1737 chip at 0x%02x (rev 0x%02x).\n",
-		 client->addr, verstep);
+	dev_info(dev, "Found a %s chip at 0x%02x (rev 0x%02x).\n",
+		 kind == sch5027 ? "SCH5027" : "DME1737", client->addr,
+		 verstep);
 
 	/* Initialize the DME1737 chip */
 	if ((err = dme1737_init_device(dev))) {
@@ -2293,14 +2427,18 @@ static int __devinit dme1737_isa_probe(struct platform_device *pdev)
 	client->addr = res->start;
 	platform_set_drvdata(pdev, data);
 
-	company = dme1737_read(client, DME1737_REG_COMPANY);
-	device = dme1737_read(client, DME1737_REG_DEVICE);
+	/* Skip chip detection if module is loaded with force_id parameter */
+	if (!force_id) {
+		company = dme1737_read(client, DME1737_REG_COMPANY);
+		device = dme1737_read(client, DME1737_REG_DEVICE);
 
-	if (!((company == DME1737_COMPANY_SMSC) &&
-	      (device == SCH311X_DEVICE))) {
-		err = -ENODEV;
-		goto exit_kfree;
+		if (!((company == DME1737_COMPANY_SMSC) &&
+		      (device == SCH311X_DEVICE))) {
+			err = -ENODEV;
+			goto exit_kfree;
+		}
 	}
+	data->type = sch311x;
 
 	/* Fill in the remaining client fields and initialize the mutex */
 	strlcpy(client->name, "sch311x", I2C_NAME_SIZE);
@@ -2377,7 +2515,10 @@ static int __init dme1737_init(void)
 	}
 
 	if (dme1737_isa_detect(0x2e, &addr) &&
-	    dme1737_isa_detect(0x4e, &addr)) {
+	    dme1737_isa_detect(0x4e, &addr) &&
+	    (!probe_all_addr ||
+	     (dme1737_isa_detect(0x162e, &addr) &&
+	      dme1737_isa_detect(0x164e, &addr)))) {
 		/* Return 0 if we didn't find an ISA device */
 		return 0;
 	}
diff --git a/drivers/hwmon/f71882fg.c b/drivers/hwmon/f71882fg.c
index cbeb4984b5c7..67067e9a323e 100644
--- a/drivers/hwmon/f71882fg.c
+++ b/drivers/hwmon/f71882fg.c
@@ -87,8 +87,6 @@ static inline void superio_enter(int base);
 static inline void superio_select(int base, int ld);
 static inline void superio_exit(int base);
 
-static inline u16 fan_from_reg ( u16 reg );
-
 struct f71882fg_data {
 	unsigned short addr;
 	struct device *hwmon_dev;
@@ -116,10 +114,6 @@ struct f71882fg_data {
 	u8	temp_diode_open;
 };
 
-static u8 f71882fg_read8(struct f71882fg_data *data, u8 reg);
-static u16 f71882fg_read16(struct f71882fg_data *data, u8 reg);
-static void f71882fg_write8(struct f71882fg_data *data, u8 reg, u8 val);
-
 /* Sysfs in*/
 static ssize_t show_in(struct device *dev, struct device_attribute *devattr,
 	char *buf);
diff --git a/drivers/hwmon/hwmon-vid.c b/drivers/hwmon/hwmon-vid.c
index 3330667280b9..c54eff92be4a 100644
--- a/drivers/hwmon/hwmon-vid.c
+++ b/drivers/hwmon/hwmon-vid.c
@@ -1,76 +1,82 @@
 /*
-    hwmon-vid.c - VID/VRM/VRD voltage conversions
-
-    Copyright (c) 2004 Rudolf Marek <r.marek@assembler.cz>
-
-    Partly imported from i2c-vid.h of the lm_sensors project
-    Copyright (c) 2002 Mark D. Studebaker <mdsxyz123@yahoo.com>
-    With assistance from Trent Piepho <xyzzy@speakeasy.org>
-
-    This program is free software; you can redistribute it and/or modify
-    it under the terms of the GNU General Public License as published by
-    the Free Software Foundation; either version 2 of the License, or
-    (at your option) any later version.
-
-    This program is distributed in the hope that it will be useful,
-    but WITHOUT ANY WARRANTY; without even the implied warranty of
-    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-    GNU General Public License for more details.
-
-    You should have received a copy of the GNU General Public License
-    along with this program; if not, write to the Free Software
-    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-*/
+ * hwmon-vid.c - VID/VRM/VRD voltage conversions
+ *
+ * Copyright (c) 2004 Rudolf Marek <r.marek@assembler.cz>
+ *
+ * Partly imported from i2c-vid.h of the lm_sensors project
+ * Copyright (c) 2002 Mark D. Studebaker <mdsxyz123@yahoo.com>
+ * With assistance from Trent Piepho <xyzzy@speakeasy.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
 
 #include <linux/module.h>
 #include <linux/kernel.h>
 #include <linux/hwmon-vid.h>
 
 /*
-    Common code for decoding VID pins.
-
-    References:
-
-    For VRM 8.4 to 9.1, "VRM x.y DC-DC Converter Design Guidelines",
-    available at http://developer.intel.com/.
-
-    For VRD 10.0 and up, "VRD x.y Design Guide",
-    available at http://developer.intel.com/.
-
-    AMD Opteron processors don't follow the Intel specifications.
-    I'm going to "make up" 2.4 as the spec number for the Opterons.
-    No good reason just a mnemonic for the 24x Opteron processor
-    series.
-
-    Opteron VID encoding is:
-       00000  =  1.550 V
-       00001  =  1.525 V
-        . . . .
-       11110  =  0.800 V
-       11111  =  0.000 V (off)
-
-    The 17 specification is in fact Intel Mobile Voltage Positioning -
-    (IMVP-II). You can find more information in the datasheet of Max1718
-    http://www.maxim-ic.com/quick_view2.cfm/qv_pk/2452
-
-    The 13 specification corresponds to the Intel Pentium M series. There
-    doesn't seem to be any named specification for these. The conversion
-    tables are detailed directly in the various Pentium M datasheets:
-    http://www.intel.com/design/intarch/pentiumm/docs_pentiumm.htm
-
-    The 14 specification corresponds to Intel Core series. There
-    doesn't seem to be any named specification for these. The conversion
-    tables are detailed directly in the various Pentium Core datasheets:
-    http://www.intel.com/design/mobile/datashts/309221.htm
-
-    The 110 (VRM 11) specification corresponds to Intel Conroe based series.
-    http://www.intel.com/design/processor/applnots/313214.htm
-*/
-
-/* vrm is the VRM/VRD document version multiplied by 10.
-   val is the 4-bit or more VID code.
-   Returned value is in mV to avoid floating point in the kernel.
-   Some VID have some bits in uV scale, this is rounded to mV */
+ * Common code for decoding VID pins.
+ *
+ * References:
+ *
+ * For VRM 8.4 to 9.1, "VRM x.y DC-DC Converter Design Guidelines",
+ * available at http://developer.intel.com/.
+ *
+ * For VRD 10.0 and up, "VRD x.y Design Guide",
+ * available at http://developer.intel.com/.
+ *
+ * AMD Athlon 64 and AMD Opteron Processors, AMD Publication 26094,
+ * http://www.amd.com/us-en/assets/content_type/white_papers_and_tech_docs/26094.PDF
+ * Table 74. VID Code Voltages
+ * This corresponds to an arbitrary VRM code of 24 in the functions below.
+ * These CPU models (K8 revision <= E) have 5 VID pins. See also:
+ * Revision Guide for AMD Athlon 64 and AMD Opteron Processors, AMD Publication 25759,
+ * http://www.amd.com/us-en/assets/content_type/white_papers_and_tech_docs/25759.pdf
+ *
+ * AMD NPT Family 0Fh Processors, AMD Publication 32559,
+ * http://www.amd.com/us-en/assets/content_type/white_papers_and_tech_docs/32559.pdf
+ * Table 71. VID Code Voltages
+ * This corresponds to an arbitrary VRM code of 25 in the functions below.
+ * These CPU models (K8 revision >= F) have 6 VID pins. See also:
+ * Revision Guide for AMD NPT Family 0Fh Processors, AMD Publication 33610,
+ * http://www.amd.com/us-en/assets/content_type/white_papers_and_tech_docs/33610.pdf
+ *
+ * The 17 specification is in fact Intel Mobile Voltage Positioning -
+ * (IMVP-II). You can find more information in the datasheet of Max1718
+ * http://www.maxim-ic.com/quick_view2.cfm/qv_pk/2452
+ *
+ * The 13 specification corresponds to the Intel Pentium M series. There
+ * doesn't seem to be any named specification for these. The conversion
+ * tables are detailed directly in the various Pentium M datasheets:
+ * http://www.intel.com/design/intarch/pentiumm/docs_pentiumm.htm
+ *
+ * The 14 specification corresponds to Intel Core series. There
+ * doesn't seem to be any named specification for these. The conversion
+ * tables are detailed directly in the various Pentium Core datasheets:
+ * http://www.intel.com/design/mobile/datashts/309221.htm
+ *
+ * The 110 (VRM 11) specification corresponds to Intel Conroe based series.
+ * http://www.intel.com/design/processor/applnots/313214.htm
+ */
+
+/*
+ * vrm is the VRM/VRD document version multiplied by 10.
+ * val is the 4-bit or more VID code.
+ * Returned value is in mV to avoid floating point in the kernel.
+ * Some VID have some bits in uV scale, this is rounded to mV.
+ */
 int vid_from_reg(int val, u8 vrm)
 {
 	int vid;
@@ -96,9 +102,16 @@ int vid_from_reg(int val, u8 vrm)
 		if (val < 0x02 || val > 0xb2)
 			return 0;
 		return((1600000 - (val - 2) * 6250 + 500) / 1000);
-	case 24:                /* Opteron processor */
+
+	case 24:		/* Athlon64 & Opteron */
 		val &= 0x1f;
-		return(val == 0x1f ? 0 : 1550 - val * 25);
+		if (val == 0x1f)
+			return 0;
+				/* fall through */
+	case 25:		/* AMD NPT 0Fh */
+		val &= 0x3f;
+		return (val < 32) ? 1550 - 25 * val
+			: 775 - (25 * (val - 31)) / 2;
 
 	case 91:		/* VRM 9.1 */
 	case 90:		/* VRM 9.0 */
@@ -141,9 +154,9 @@ int vid_from_reg(int val, u8 vrm)
 
 
 /*
-    After this point is the code to automatically determine which
-    VRM/VRD specification should be used depending on the CPU.
-*/
+ * After this point is the code to automatically determine which
+ * VRM/VRD specification should be used depending on the CPU.
+ */
 
 struct vrm_model {
 	u8 vendor;
@@ -157,11 +170,16 @@ struct vrm_model {
 
 #ifdef CONFIG_X86
 
-/* the stepping parameter is highest acceptable stepping for current line */
+/*
+ * The stepping parameter is highest acceptable stepping for current line.
+ * The model match must be exact for 4-bit values. For model values 0x10
+ * and above (extended model), all models below the parameter will match.
+ */
 
 static struct vrm_model vrm_models[] = {
 	{X86_VENDOR_AMD, 0x6, ANY, ANY, 90},		/* Athlon Duron etc */
-	{X86_VENDOR_AMD, 0xF, ANY, ANY, 24},		/* Athlon 64, Opteron and above VRM 24 */
+	{X86_VENDOR_AMD, 0xF, 0x3F, ANY, 24},		/* Athlon 64, Opteron */
+	{X86_VENDOR_AMD, 0xF, ANY, ANY, 25},		/* NPT family 0Fh */
 	{X86_VENDOR_INTEL, 0x6, 0x9, ANY, 13},		/* Pentium M (130 nm) */
 	{X86_VENDOR_INTEL, 0x6, 0xB, ANY, 85},		/* Tualatin */
 	{X86_VENDOR_INTEL, 0x6, 0xD, ANY, 13},		/* Pentium M (90 nm) */
@@ -189,6 +207,8 @@ static u8 find_vrm(u8 eff_family, u8 eff_model, u8 eff_stepping, u8 vendor)
 		if (vrm_models[i].vendor==vendor)
 			if ((vrm_models[i].eff_family==eff_family)
 			 && ((vrm_models[i].eff_model==eff_model) ||
+			     (vrm_models[i].eff_model >= 0x10 &&
+			      eff_model <= vrm_models[i].eff_model) ||
 			     (vrm_models[i].eff_model==ANY)) &&
 			     (eff_stepping <= vrm_models[i].eff_stepping))
 				return vrm_models[i].vrm_type;
diff --git a/drivers/hwmon/i5k_amb.c b/drivers/hwmon/i5k_amb.c
index f9e2ed621f7b..2ede9388096b 100644
--- a/drivers/hwmon/i5k_amb.c
+++ b/drivers/hwmon/i5k_amb.c
@@ -81,6 +81,8 @@ static unsigned long amb_reg_temp(unsigned int amb)
 #define MAX_AMBS_PER_CHANNEL		16
 #define MAX_AMBS			(MAX_MEM_CHANNELS * \
 					 MAX_AMBS_PER_CHANNEL)
+#define CHANNEL_SHIFT			4
+#define DIMM_MASK			0xF
 /*
  * Ugly hack: For some reason the highest bit is set if there
  * are _any_ DIMMs in the channel.  Attempting to read from
@@ -89,7 +91,7 @@ static unsigned long amb_reg_temp(unsigned int amb)
  * might prevent us from seeing the 16th DIMM in the channel.
  */
 #define REAL_MAX_AMBS_PER_CHANNEL	15
-#define KNOBS_PER_AMB			5
+#define KNOBS_PER_AMB			6
 
 static unsigned long amb_num_from_reg(unsigned int byte_num, unsigned int bit)
 {
@@ -238,6 +240,16 @@ static ssize_t show_amb_temp(struct device *dev,
 		500 * amb_read_byte(data, amb_reg_temp(attr->index)));
 }
 
+static ssize_t show_label(struct device *dev,
+			  struct device_attribute *devattr,
+			  char *buf)
+{
+	struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+
+	return sprintf(buf, "Ch. %d DIMM %d\n", attr->index >> CHANNEL_SHIFT,
+		       attr->index & DIMM_MASK);
+}
+
 static int __devinit i5k_amb_hwmon_init(struct platform_device *pdev)
 {
 	int i, j, k, d = 0;
@@ -268,6 +280,20 @@ static int __devinit i5k_amb_hwmon_init(struct platform_device *pdev)
 				continue;
 			d++;
 
+			/* sysfs label */
+			iattr = data->attrs + data->num_attrs;
+			snprintf(iattr->name, AMB_SYSFS_NAME_LEN,
+				 "temp%d_label", d);
+			iattr->s_attr.dev_attr.attr.name = iattr->name;
+			iattr->s_attr.dev_attr.attr.mode = S_IRUGO;
+			iattr->s_attr.dev_attr.show = show_label;
+			iattr->s_attr.index = k;
+			res = device_create_file(&pdev->dev,
+						 &iattr->s_attr.dev_attr);
+			if (res)
+				goto exit_remove;
+			data->num_attrs++;
+
 			/* Temperature sysfs knob */
 			iattr = data->attrs + data->num_attrs;
 			snprintf(iattr->name, AMB_SYSFS_NAME_LEN,
diff --git a/drivers/hwmon/ibmaem.c b/drivers/hwmon/ibmaem.c
index c9416e657487..0f70dc204105 100644
--- a/drivers/hwmon/ibmaem.c
+++ b/drivers/hwmon/ibmaem.c
@@ -1,6 +1,6 @@
 /*
- * A hwmon driver for the IBM Active Energy Manager temperature/power sensors
- * and capping functionality.
+ * A hwmon driver for the IBM System Director Active Energy Manager (AEM)
+ * temperature/power/energy sensors and capping functionality.
  * Copyright (C) 2008 IBM
  *
  * Author: Darrick J. Wong <djwong@us.ibm.com>
@@ -463,12 +463,18 @@ static int aem_read_sensor(struct aem_data *data, u8 elt, u8 reg,
 }
 
 /* Update AEM energy registers */
+static void update_aem_energy_one(struct aem_data *data, int which)
+{
+	aem_read_sensor(data, AEM_ENERGY_ELEMENT, which,
+			&data->energy[which], 8);
+}
+
 static void update_aem_energy(struct aem_data *data)
 {
-	aem_read_sensor(data, AEM_ENERGY_ELEMENT, 0, &data->energy[0], 8);
+	update_aem_energy_one(data, 0);
 	if (data->ver_major < 2)
 		return;
-	aem_read_sensor(data, AEM_ENERGY_ELEMENT, 1, &data->energy[1], 8);
+	update_aem_energy_one(data, 1);
 }
 
 /* Update all AEM1 sensors */
@@ -676,7 +682,8 @@ static int aem_find_aem2(struct aem_ipmi_data *data,
 		return -ETIMEDOUT;
 
 	if (data->rx_result || data->rx_msg_len != sizeof(*fi_resp) ||
-	    memcmp(&fi_resp->id, &system_x_id, sizeof(system_x_id)))
+	    memcmp(&fi_resp->id, &system_x_id, sizeof(system_x_id)) ||
+	    fi_resp->num_instances <= instance_num)
 		return -ENOENT;
 
 	return 0;
@@ -849,7 +856,7 @@ static ssize_t aem_show_power(struct device *dev,
 	struct timespec b, a;
 
 	mutex_lock(&data->lock);
-	update_aem_energy(data);
+	update_aem_energy_one(data, attr->index);
 	getnstimeofday(&b);
 	before = data->energy[attr->index];
 
@@ -861,7 +868,7 @@ static ssize_t aem_show_power(struct device *dev,
 		return 0;
 	}
 
-	update_aem_energy(data);
+	update_aem_energy_one(data, attr->index);
 	getnstimeofday(&a);
 	after = data->energy[attr->index];
 	mutex_unlock(&data->lock);
@@ -880,7 +887,9 @@ static ssize_t aem_show_energy(struct device *dev,
 {
 	struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
 	struct aem_data *a = dev_get_drvdata(dev);
-	a->update(a);
+	mutex_lock(&a->lock);
+	update_aem_energy_one(a, attr->index);
+	mutex_unlock(&a->lock);
 
 	return sprintf(buf, "%llu\n",
 			(unsigned long long)a->energy[attr->index] * 1000);
@@ -1104,7 +1113,7 @@ static void __exit aem_exit(void)
 }
 
 MODULE_AUTHOR("Darrick J. Wong <djwong@us.ibm.com>");
-MODULE_DESCRIPTION("IBM Active Energy Manager power/temp sensor driver");
+MODULE_DESCRIPTION("IBM AEM power/temp/energy sensor driver");
 MODULE_LICENSE("GPL");
 
 module_init(aem_init);
diff --git a/drivers/hwmon/it87.c b/drivers/hwmon/it87.c
index e12c132ff83a..30cdb0956779 100644
--- a/drivers/hwmon/it87.c
+++ b/drivers/hwmon/it87.c
@@ -151,9 +151,9 @@ static int fix_pwm_polarity;
 /* The IT8718F has the VID value in a different register, in Super-I/O
    configuration space. */
 #define IT87_REG_VID           0x0a
-/* Warning: register 0x0b is used for something completely different in
-   new chips/revisions. I suspect only 16-bit tachometer mode will work
-   for these. */
+/* The IT8705F and IT8712F earlier than revision 0x08 use register 0x0b
+   for fan divisors. Later IT8712F revisions must use 16-bit tachometer
+   mode. */
 #define IT87_REG_FAN_DIV       0x0b
 #define IT87_REG_FAN_16BIT     0x0c
 
@@ -234,6 +234,7 @@ static const unsigned int pwm_freq[8] = {
 struct it87_sio_data {
 	enum chips type;
 	/* Values read from Super-I/O config space */
+	u8 revision;
 	u8 vid_value;
 };
 
@@ -242,6 +243,7 @@ struct it87_sio_data {
 struct it87_data {
 	struct device *hwmon_dev;
 	enum chips type;
+	u8 revision;
 
 	unsigned short addr;
 	const char *name;
@@ -268,6 +270,16 @@ struct it87_data {
 	u8 manual_pwm_ctl[3];   /* manual PWM value set by user */
 };
 
+static inline int has_16bit_fans(const struct it87_data *data)
+{
+	/* IT8705F Datasheet 0.4.1, 3h == Version G.
+	   IT8712F Datasheet 0.9.1, section 8.3.5 indicates 7h == Version I.
+	   These are the first revisions with 16bit tachometer support. */
+	return (data->type == it87 && data->revision >= 0x03)
+	    || (data->type == it8712 && data->revision >= 0x07)
+	    || data->type == it8716
+	    || data->type == it8718;
+}
 
 static int it87_probe(struct platform_device *pdev);
 static int __devexit it87_remove(struct platform_device *pdev);
@@ -991,8 +1003,9 @@ static int __init it87_find(unsigned short *address,
 	}
 
 	err = 0;
+	sio_data->revision = superio_inb(DEVREV) & 0x0f;
 	pr_info("it87: Found IT%04xF chip at 0x%x, revision %d\n",
-		chip_type, *address, superio_inb(DEVREV) & 0x0f);
+		chip_type, *address, sio_data->revision);
 
 	/* Read GPIO config and VID value from LDN 7 (GPIO) */
 	if (chip_type != IT8705F_DEVID) {
@@ -1045,6 +1058,7 @@ static int __devinit it87_probe(struct platform_device *pdev)
 
 	data->addr = res->start;
 	data->type = sio_data->type;
+	data->revision = sio_data->revision;
 	data->name = names[sio_data->type];
 
 	/* Now, we do the remaining detection. */
@@ -1069,7 +1083,7 @@ static int __devinit it87_probe(struct platform_device *pdev)
 		goto ERROR2;
 
 	/* Do not create fan files for disabled fans */
-	if (data->type == it8716 || data->type == it8718) {
+	if (has_16bit_fans(data)) {
 		/* 16-bit tachometers */
 		if (data->has_fan & (1 << 0)) {
 			if ((err = device_create_file(dev,
@@ -1350,7 +1364,7 @@ static void __devinit it87_init_device(struct platform_device *pdev)
 	data->has_fan = (data->fan_main_ctrl >> 4) & 0x07;
 
 	/* Set tachometers to 16-bit mode if needed */
-	if (data->type == it8716 || data->type == it8718) {
+	if (has_16bit_fans(data)) {
 		tmp = it87_read_value(data, IT87_REG_FAN_16BIT);
 		if (~tmp & 0x07 & data->has_fan) {
 			dev_dbg(&pdev->dev,
@@ -1358,10 +1372,13 @@ static void __devinit it87_init_device(struct platform_device *pdev)
 			it87_write_value(data, IT87_REG_FAN_16BIT,
 					 tmp | 0x07);
 		}
-		if (tmp & (1 << 4))
-			data->has_fan |= (1 << 3);	/* fan4 enabled */
-		if (tmp & (1 << 5))
-			data->has_fan |= (1 << 4);	/* fan5 enabled */
+		/* IT8705F only supports three fans. */
+		if (data->type != it87) {
+			if (tmp & (1 << 4))
+				data->has_fan |= (1 << 3); /* fan4 enabled */
+			if (tmp & (1 << 5))
+				data->has_fan |= (1 << 4); /* fan5 enabled */
+		}
 	}
 
 	/* Set current fan mode registers and the default settings for the
@@ -1426,7 +1443,7 @@ static struct it87_data *it87_update_device(struct device *dev)
 			data->fan[i] = it87_read_value(data,
 				       IT87_REG_FAN[i]);
 			/* Add high byte if in 16-bit mode */
-			if (data->type == it8716 || data->type == it8718) {
+			if (has_16bit_fans(data)) {
 				data->fan[i] |= it87_read_value(data,
 						IT87_REG_FANX[i]) << 8;
 				data->fan_min[i] |= it87_read_value(data,
@@ -1443,8 +1460,7 @@ static struct it87_data *it87_update_device(struct device *dev)
 		}
 
 		/* Newer chips don't have clock dividers */
-		if ((data->has_fan & 0x07) && data->type != it8716
-		 && data->type != it8718) {
+		if ((data->has_fan & 0x07) && !has_16bit_fans(data)) {
 			i = it87_read_value(data, IT87_REG_FAN_DIV);
 			data->fan_div[0] = i & 0x07;
 			data->fan_div[1] = (i >> 3) & 0x07;
@@ -1460,7 +1476,8 @@ static struct it87_data *it87_update_device(struct device *dev)
 		data->fan_ctl = it87_read_value(data, IT87_REG_FAN_CTL);
 
 		data->sensor = it87_read_value(data, IT87_REG_TEMP_ENABLE);
-		/* The 8705 does not have VID capability */
+		/* The 8705 does not have VID capability.
+		   The 8718 does not use IT87_REG_VID for the same purpose. */
 		if (data->type == it8712 || data->type == it8716) {
 			data->vid = it87_read_value(data, IT87_REG_VID);
 			/* The older IT8712F revisions had only 5 VID pins,
diff --git a/drivers/hwmon/lm75.c b/drivers/hwmon/lm75.c
index de698dc73020..8f9595f2fb53 100644
--- a/drivers/hwmon/lm75.c
+++ b/drivers/hwmon/lm75.c
@@ -30,14 +30,37 @@
 #include "lm75.h"
 
 
-/* Addresses to scan */
+/*
+ * This driver handles the LM75 and compatible digital temperature sensors.
+ * Only types which are _not_ listed in I2C_CLIENT_INSMOD_*() need to be
+ * listed here.  We start at 9 since I2C_CLIENT_INSMOD_*() currently allow
+ * definition of up to 8 chip types (plus zero).
+ */
+
+enum lm75_type {		/* keep sorted in alphabetical order */
+	ds1775 = 9,
+	ds75,
+	/* lm75 -- in I2C_CLIENT_INSMOD_1() */
+	lm75a,
+	max6625,
+	max6626,
+	mcp980x,
+	stds75,
+	tcn75,
+	tmp100,
+	tmp101,
+	tmp175,
+	tmp275,
+	tmp75,
+};
+
+/* Addresses scanned */
 static const unsigned short normal_i2c[] = { 0x48, 0x49, 0x4a, 0x4b, 0x4c,
 					0x4d, 0x4e, 0x4f, I2C_CLIENT_END };
 
 /* Insmod parameters */
 I2C_CLIENT_INSMOD_1(lm75);
 
-/* Many LM75 constants specified below */
 
 /* The LM75 registers */
 #define LM75_REG_CONF		0x01
@@ -49,10 +72,10 @@ static const u8 LM75_REG_TEMP[3] = {
 
 /* Each client has this additional data */
 struct lm75_data {
-	struct i2c_client	client;
-	struct device *hwmon_dev;
+	struct device		*hwmon_dev;
 	struct mutex		update_lock;
-	char			valid;		/* !=0 if following fields are valid */
+	u8			orig_conf;
+	char			valid;		/* !=0 if registers are valid */
 	unsigned long		last_updated;	/* In jiffies */
 	u16			temp[3];	/* Register values,
 						   0 = input
@@ -60,23 +83,14 @@ struct lm75_data {
 						   2 = hyst */
 };
 
-static int lm75_attach_adapter(struct i2c_adapter *adapter);
-static int lm75_detect(struct i2c_adapter *adapter, int address, int kind);
-static void lm75_init_client(struct i2c_client *client);
-static int lm75_detach_client(struct i2c_client *client);
 static int lm75_read_value(struct i2c_client *client, u8 reg);
 static int lm75_write_value(struct i2c_client *client, u8 reg, u16 value);
 static struct lm75_data *lm75_update_device(struct device *dev);
 
 
-/* This is the driver that will be inserted */
-static struct i2c_driver lm75_driver = {
-	.driver = {
-		.name	= "lm75",
-	},
-	.attach_adapter	= lm75_attach_adapter,
-	.detach_client	= lm75_detach_client,
-};
+/*-----------------------------------------------------------------------*/
+
+/* sysfs attributes for hwmon */
 
 static ssize_t show_temp(struct device *dev, struct device_attribute *da,
 			 char *buf)
@@ -109,13 +123,6 @@ static SENSOR_DEVICE_ATTR(temp1_max_hyst, S_IWUSR | S_IRUGO,
 			show_temp, set_temp, 2);
 static SENSOR_DEVICE_ATTR(temp1_input, S_IRUGO, show_temp, NULL, 0);
 
-static int lm75_attach_adapter(struct i2c_adapter *adapter)
-{
-	if (!(adapter->class & I2C_CLASS_HWMON))
-		return 0;
-	return i2c_probe(adapter, &addr_data, lm75_detect);
-}
-
 static struct attribute *lm75_attributes[] = {
 	&sensor_dev_attr_temp1_input.dev_attr.attr,
 	&sensor_dev_attr_temp1_max.dev_attr.attr,
@@ -128,33 +135,114 @@ static const struct attribute_group lm75_group = {
 	.attrs = lm75_attributes,
 };
 
-/* This function is called by i2c_probe */
-static int lm75_detect(struct i2c_adapter *adapter, int address, int kind)
+/*-----------------------------------------------------------------------*/
+
+/* device probe and removal */
+
+static int
+lm75_probe(struct i2c_client *client, const struct i2c_device_id *id)
 {
-	int i;
-	struct i2c_client *new_client;
 	struct lm75_data *data;
-	int err = 0;
-	const char *name = "";
+	int status;
+	u8 set_mask, clr_mask;
+	int new;
 
-	if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA |
-				     I2C_FUNC_SMBUS_WORD_DATA))
-		goto exit;
-
-	/* OK. For now, we presume we have a valid client. We now create the
-	   client structure, even though we cannot fill it completely yet.
-	   But it allows us to access lm75_{read,write}_value. */
-	if (!(data = kzalloc(sizeof(struct lm75_data), GFP_KERNEL))) {
-		err = -ENOMEM;
-		goto exit;
+	if (!i2c_check_functionality(client->adapter,
+			I2C_FUNC_SMBUS_BYTE_DATA | I2C_FUNC_SMBUS_WORD_DATA))
+		return -EIO;
+
+	data = kzalloc(sizeof(struct lm75_data), GFP_KERNEL);
+	if (!data)
+		return -ENOMEM;
+
+	i2c_set_clientdata(client, data);
+	mutex_init(&data->update_lock);
+
+	/* Set to LM75 resolution (9 bits, 1/2 degree C) and range.
+	 * Then tweak to be more precise when appropriate.
+	 */
+	set_mask = 0;
+	clr_mask = (1 << 0)			/* continuous conversions */
+		| (1 << 6) | (1 << 5);		/* 9-bit mode */
+
+	/* configure as specified */
+	status = lm75_read_value(client, LM75_REG_CONF);
+	if (status < 0) {
+		dev_dbg(&client->dev, "Can't read config? %d\n", status);
+		goto exit_free;
 	}
+	data->orig_conf = status;
+	new = status & ~clr_mask;
+	new |= set_mask;
+	if (status != new)
+		lm75_write_value(client, LM75_REG_CONF, new);
+	dev_dbg(&client->dev, "Config %02x\n", new);
+
+	/* Register sysfs hooks */
+	status = sysfs_create_group(&client->dev.kobj, &lm75_group);
+	if (status)
+		goto exit_free;
+
+	data->hwmon_dev = hwmon_device_register(&client->dev);
+	if (IS_ERR(data->hwmon_dev)) {
+		status = PTR_ERR(data->hwmon_dev);
+		goto exit_remove;
+	}
+
+	dev_info(&client->dev, "%s: sensor '%s'\n",
+		data->hwmon_dev->bus_id, client->name);
+
+	return 0;
+
+exit_remove:
+	sysfs_remove_group(&client->dev.kobj, &lm75_group);
+exit_free:
+	i2c_set_clientdata(client, NULL);
+	kfree(data);
+	return status;
+}
+
+static int lm75_remove(struct i2c_client *client)
+{
+	struct lm75_data *data = i2c_get_clientdata(client);
+
+	hwmon_device_unregister(data->hwmon_dev);
+	sysfs_remove_group(&client->dev.kobj, &lm75_group);
+	lm75_write_value(client, LM75_REG_CONF, data->orig_conf);
+	i2c_set_clientdata(client, NULL);
+	kfree(data);
+	return 0;
+}
+
+static const struct i2c_device_id lm75_ids[] = {
+	{ "ds1775", ds1775, },
+	{ "ds75", ds75, },
+	{ "lm75", lm75, },
+	{ "lm75a", lm75a, },
+	{ "max6625", max6625, },
+	{ "max6626", max6626, },
+	{ "mcp980x", mcp980x, },
+	{ "stds75", stds75, },
+	{ "tcn75", tcn75, },
+	{ "tmp100", tmp100, },
+	{ "tmp101", tmp101, },
+	{ "tmp175", tmp175, },
+	{ "tmp275", tmp275, },
+	{ "tmp75", tmp75, },
+	{ /* LIST END */ }
+};
+MODULE_DEVICE_TABLE(i2c, lm75_ids);
+
+/* Return 0 if detection is successful, -ENODEV otherwise */
+static int lm75_detect(struct i2c_client *new_client, int kind,
+		       struct i2c_board_info *info)
+{
+	struct i2c_adapter *adapter = new_client->adapter;
+	int i;
 
-	new_client = &data->client;
-	i2c_set_clientdata(new_client, data);
-	new_client->addr = address;
-	new_client->adapter = adapter;
-	new_client->driver = &lm75_driver;
-	new_client->flags = 0;
+	if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA |
+				     I2C_FUNC_SMBUS_WORD_DATA))
+		return -ENODEV;
 
 	/* Now, we do the remaining detection. There is no identification-
 	   dedicated register so we have to rely on several tricks:
@@ -174,77 +262,49 @@ static int lm75_detect(struct i2c_adapter *adapter, int address, int kind)
 		 || i2c_smbus_read_word_data(new_client, 5) != hyst
 		 || i2c_smbus_read_word_data(new_client, 6) != hyst
 		 || i2c_smbus_read_word_data(new_client, 7) != hyst)
-		 	goto exit_free;
+			return -ENODEV;
 		os = i2c_smbus_read_word_data(new_client, 3);
 		if (i2c_smbus_read_word_data(new_client, 4) != os
 		 || i2c_smbus_read_word_data(new_client, 5) != os
 		 || i2c_smbus_read_word_data(new_client, 6) != os
 		 || i2c_smbus_read_word_data(new_client, 7) != os)
-		 	goto exit_free;
+			return -ENODEV;
 
 		/* Unused bits */
 		if (conf & 0xe0)
-		 	goto exit_free;
+			return -ENODEV;
 
 		/* Addresses cycling */
 		for (i = 8; i < 0xff; i += 8)
 			if (i2c_smbus_read_byte_data(new_client, i + 1) != conf
 			 || i2c_smbus_read_word_data(new_client, i + 2) != hyst
 			 || i2c_smbus_read_word_data(new_client, i + 3) != os)
-				goto exit_free;
+				return -ENODEV;
 	}
 
-	/* Determine the chip type - only one kind supported! */
-	if (kind <= 0)
-		kind = lm75;
-
-	if (kind == lm75) {
-		name = "lm75";
-	}
-
-	/* Fill in the remaining client fields and put it into the global list */
-	strlcpy(new_client->name, name, I2C_NAME_SIZE);
-	data->valid = 0;
-	mutex_init(&data->update_lock);
-
-	/* Tell the I2C layer a new client has arrived */
-	if ((err = i2c_attach_client(new_client)))
-		goto exit_free;
-
-	/* Initialize the LM75 chip */
-	lm75_init_client(new_client);
-	
-	/* Register sysfs hooks */
-	if ((err = sysfs_create_group(&new_client->dev.kobj, &lm75_group)))
-		goto exit_detach;
-
-	data->hwmon_dev = hwmon_device_register(&new_client->dev);
-	if (IS_ERR(data->hwmon_dev)) {
-		err = PTR_ERR(data->hwmon_dev);
-		goto exit_remove;
-	}
+	/* NOTE: we treat "force=..." and "force_lm75=..." the same.
+	 * Only new-style driver binding distinguishes chip types.
+	 */
+	strlcpy(info->type, "lm75", I2C_NAME_SIZE);
 
 	return 0;
-
-exit_remove:
-	sysfs_remove_group(&new_client->dev.kobj, &lm75_group);
-exit_detach:
-	i2c_detach_client(new_client);
-exit_free:
-	kfree(data);
-exit:
-	return err;
 }
 
-static int lm75_detach_client(struct i2c_client *client)
-{
-	struct lm75_data *data = i2c_get_clientdata(client);
-	hwmon_device_unregister(data->hwmon_dev);
-	sysfs_remove_group(&client->dev.kobj, &lm75_group);
-	i2c_detach_client(client);
-	kfree(data);
-	return 0;
-}
+static struct i2c_driver lm75_driver = {
+	.class		= I2C_CLASS_HWMON,
+	.driver = {
+		.name	= "lm75",
+	},
+	.probe		= lm75_probe,
+	.remove		= lm75_remove,
+	.id_table	= lm75_ids,
+	.detect		= lm75_detect,
+	.address_data	= &addr_data,
+};
+
+/*-----------------------------------------------------------------------*/
+
+/* register access */
 
 /* All registers are word-sized, except for the configuration register.
    LM75 uses a high-byte first convention, which is exactly opposite to
@@ -268,16 +328,6 @@ static int lm75_write_value(struct i2c_client *client, u8 reg, u16 value)
 		return i2c_smbus_write_word_data(client, reg, swab16(value));
 }
 
-static void lm75_init_client(struct i2c_client *client)
-{
-	int reg;
-
-	/* Enable if in shutdown mode */
-	reg = lm75_read_value(client, LM75_REG_CONF);
-	if (reg >= 0 && (reg & 0x01))
-		lm75_write_value(client, LM75_REG_CONF, reg & 0xfe);
-}
-
 static struct lm75_data *lm75_update_device(struct device *dev)
 {
 	struct i2c_client *client = to_i2c_client(dev);
@@ -309,6 +359,10 @@ static struct lm75_data *lm75_update_device(struct device *dev)
 	return data;
 }
 
+/*-----------------------------------------------------------------------*/
+
+/* module glue */
+
 static int __init sensors_lm75_init(void)
 {
 	return i2c_add_driver(&lm75_driver);
diff --git a/drivers/hwmon/lm85.c b/drivers/hwmon/lm85.c
index ee5eca1c1921..12d446f54f97 100644
--- a/drivers/hwmon/lm85.c
+++ b/drivers/hwmon/lm85.c
@@ -1,7 +1,7 @@
 /*
     lm85.c - Part of lm_sensors, Linux kernel modules for hardware
              monitoring
-    Copyright (c) 1998, 1999  Frodo Looijaard <frodol@dds.nl> 
+    Copyright (c) 1998, 1999  Frodo Looijaard <frodol@dds.nl>
     Copyright (c) 2002, 2003  Philip Pokorny <ppokorny@penguincomputing.com>
     Copyright (c) 2003        Margit Schubert-While <margitsw@t-online.de>
     Copyright (c) 2004        Justin Thiessen <jthiessen@penguincomputing.com>
@@ -51,24 +51,17 @@ I2C_CLIENT_INSMOD_6(lm85b, lm85c, adm1027, adt7463, emc6d100, emc6d102);
 #define	LM85_REG_TEMP_MAX(nr)		(0x4f + (nr) * 2)
 
 /* Fan speeds are LSB, MSB (2 bytes) */
-#define	LM85_REG_FAN(nr)		(0x28 + (nr) *2)
-#define	LM85_REG_FAN_MIN(nr)		(0x54 + (nr) *2)
+#define	LM85_REG_FAN(nr)		(0x28 + (nr) * 2)
+#define	LM85_REG_FAN_MIN(nr)		(0x54 + (nr) * 2)
 
 #define	LM85_REG_PWM(nr)		(0x30 + (nr))
 
-#define	ADT7463_REG_OPPOINT(nr)		(0x33 + (nr))
-
-#define	ADT7463_REG_TMIN_CTL1		0x36
-#define	ADT7463_REG_TMIN_CTL2		0x37
-
-#define	LM85_REG_DEVICE			0x3d
 #define	LM85_REG_COMPANY		0x3e
 #define	LM85_REG_VERSTEP		0x3f
 /* These are the recognized values for the above regs */
-#define	LM85_DEVICE_ADX			0x27
 #define	LM85_COMPANY_NATIONAL		0x01
 #define	LM85_COMPANY_ANALOG_DEV		0x41
-#define	LM85_COMPANY_SMSC      		0x5c
+#define	LM85_COMPANY_SMSC		0x5c
 #define	LM85_VERSTEP_VMASK              0xf0
 #define	LM85_VERSTEP_GENERIC		0x60
 #define	LM85_VERSTEP_LM85C		0x60
@@ -91,58 +84,45 @@ I2C_CLIENT_INSMOD_6(lm85b, lm85c, adm1027, adt7463, emc6d100, emc6d102);
 #define	LM85_REG_AFAN_CONFIG(nr)	(0x5c + (nr))
 #define	LM85_REG_AFAN_RANGE(nr)		(0x5f + (nr))
 #define	LM85_REG_AFAN_SPIKE1		0x62
-#define	LM85_REG_AFAN_SPIKE2		0x63
 #define	LM85_REG_AFAN_MINPWM(nr)	(0x64 + (nr))
 #define	LM85_REG_AFAN_LIMIT(nr)		(0x67 + (nr))
 #define	LM85_REG_AFAN_CRITICAL(nr)	(0x6a + (nr))
 #define	LM85_REG_AFAN_HYST1		0x6d
 #define	LM85_REG_AFAN_HYST2		0x6e
 
-#define	LM85_REG_TACH_MODE		0x74
-#define	LM85_REG_SPINUP_CTL		0x75
-
-#define	ADM1027_REG_TEMP_OFFSET(nr)	(0x70 + (nr))
-#define	ADM1027_REG_CONFIG2		0x73
-#define	ADM1027_REG_INTMASK1		0x74
-#define	ADM1027_REG_INTMASK2		0x75
 #define	ADM1027_REG_EXTEND_ADC1		0x76
 #define	ADM1027_REG_EXTEND_ADC2		0x77
-#define	ADM1027_REG_CONFIG3		0x78
-#define	ADM1027_REG_FAN_PPR		0x7b
-
-#define	ADT7463_REG_THERM		0x79
-#define	ADT7463_REG_THERM_LIMIT		0x7A
 
 #define EMC6D100_REG_ALARM3             0x7d
 /* IN5, IN6 and IN7 */
-#define	EMC6D100_REG_IN(nr)             (0x70 + ((nr)-5))
-#define	EMC6D100_REG_IN_MIN(nr)         (0x73 + ((nr)-5) * 2)
-#define	EMC6D100_REG_IN_MAX(nr)         (0x74 + ((nr)-5) * 2)
+#define	EMC6D100_REG_IN(nr)             (0x70 + ((nr) - 5))
+#define	EMC6D100_REG_IN_MIN(nr)         (0x73 + ((nr) - 5) * 2)
+#define	EMC6D100_REG_IN_MAX(nr)         (0x74 + ((nr) - 5) * 2)
 #define	EMC6D102_REG_EXTEND_ADC1	0x85
 #define	EMC6D102_REG_EXTEND_ADC2	0x86
 #define	EMC6D102_REG_EXTEND_ADC3	0x87
 #define	EMC6D102_REG_EXTEND_ADC4	0x88
 
 
-/* Conversions. Rounding and limit checking is only done on the TO_REG 
+/* Conversions. Rounding and limit checking is only done on the TO_REG
    variants. Note that you should be a bit careful with which arguments
    these macros are called: arguments may be evaluated more than once.
  */
 
 /* IN are scaled acording to built-in resistors */
-static int lm85_scaling[] = {  /* .001 Volts */
-		2500, 2250, 3300, 5000, 12000,
-		3300, 1500, 1800 /*EMC6D100*/
-	};
-#define SCALE(val,from,to)		(((val)*(to) + ((from)/2))/(from))
+static const int lm85_scaling[] = {  /* .001 Volts */
+	2500, 2250, 3300, 5000, 12000,
+	3300, 1500, 1800 /*EMC6D100*/
+};
+#define SCALE(val, from, to)	(((val) * (to) + ((from) / 2)) / (from))
 
-#define INS_TO_REG(n,val)	\
-		SENSORS_LIMIT(SCALE(val,lm85_scaling[n],192),0,255)
+#define INS_TO_REG(n, val)	\
+		SENSORS_LIMIT(SCALE(val, lm85_scaling[n], 192), 0, 255)
 
-#define INSEXT_FROM_REG(n,val,ext)	\
+#define INSEXT_FROM_REG(n, val, ext)	\
 		SCALE(((val) << 4) + (ext), 192 << 4, lm85_scaling[n])
 
-#define INS_FROM_REG(n,val)	SCALE((val), 192, lm85_scaling[n])
+#define INS_FROM_REG(n, val)	SCALE((val), 192, lm85_scaling[n])
 
 /* FAN speed is measured using 90kHz clock */
 static inline u16 FAN_TO_REG(unsigned long val)
@@ -151,16 +131,17 @@ static inline u16 FAN_TO_REG(unsigned long val)
 		return 0xffff;
 	return SENSORS_LIMIT(5400000 / val, 1, 0xfffe);
 }
-#define FAN_FROM_REG(val)	((val)==0?-1:(val)==0xffff?0:5400000/(val))
+#define FAN_FROM_REG(val)	((val) == 0 ? -1 : (val) == 0xffff ? 0 : \
+				 5400000 / (val))
 
 /* Temperature is reported in .001 degC increments */
 #define TEMP_TO_REG(val)	\
-		SENSORS_LIMIT(SCALE(val,1000,1),-127,127)
-#define TEMPEXT_FROM_REG(val,ext)	\
+		SENSORS_LIMIT(SCALE(val, 1000, 1), -127, 127)
+#define TEMPEXT_FROM_REG(val, ext)	\
 		SCALE(((val) << 4) + (ext), 16, 1000)
 #define TEMP_FROM_REG(val)	((val) * 1000)
 
-#define PWM_TO_REG(val)			(SENSORS_LIMIT(val,0,255))
+#define PWM_TO_REG(val)			SENSORS_LIMIT(val, 0, 255)
 #define PWM_FROM_REG(val)		(val)
 
 
@@ -183,17 +164,17 @@ static inline u16 FAN_TO_REG(unsigned long val)
  */
 
 /* These are the zone temperature range encodings in .001 degree C */
-static int lm85_range_map[] = {   
-		2000,  2500,  3300,  4000,  5000,  6600,
-		8000, 10000, 13300, 16000, 20000, 26600,
-		32000, 40000, 53300, 80000
-	};
-static int RANGE_TO_REG( int range )
+static const int lm85_range_map[] = {
+	2000, 2500, 3300, 4000, 5000, 6600, 8000, 10000,
+	13300, 16000, 20000, 26600, 32000, 40000, 53300, 80000
+};
+
+static int RANGE_TO_REG(int range)
 {
 	int i;
 
 	if (range >= lm85_range_map[15])
-		return 15 ;
+		return 15;
 
 	/* Find the closest match */
 	for (i = 14; i >= 0; --i) {
@@ -207,28 +188,25 @@ static int RANGE_TO_REG( int range )
 
 	return 0;
 }
-#define RANGE_FROM_REG(val) (lm85_range_map[(val)&0x0f])
+#define RANGE_FROM_REG(val)	lm85_range_map[(val) & 0x0f]
 
-/* These are the Acoustic Enhancement, or Temperature smoothing encodings
- * NOTE: The enable/disable bit is INCLUDED in these encodings as the
- *       MSB (bit 3, value 8).  If the enable bit is 0, the encoded value
- *       is ignored, or set to 0.
- */
 /* These are the PWM frequency encodings */
-static int lm85_freq_map[] = { /* .1 Hz */
-		100, 150, 230, 300, 380, 470, 620, 940
-	};
-static int FREQ_TO_REG( int freq )
+static const int lm85_freq_map[] = { /* .1 Hz */
+	100, 150, 230, 300, 380, 470, 620, 940
+};
+
+static int FREQ_TO_REG(int freq)
 {
 	int i;
 
-	if( freq >= lm85_freq_map[7] ) { return 7 ; }
-	for( i = 0 ; i < 7 ; ++i )
-		if( freq <= lm85_freq_map[i] )
-			break ;
-	return( i & 0x07 );
+	if (freq >= lm85_freq_map[7])
+		return 7;
+	for (i = 0; i < 7; ++i)
+		if (freq <= lm85_freq_map[i])
+			break;
+	return i;
 }
-#define FREQ_FROM_REG(val) (lm85_freq_map[(val)&0x07])
+#define FREQ_FROM_REG(val)	lm85_freq_map[(val) & 0x07]
 
 /* Since we can't use strings, I'm abusing these numbers
  *   to stand in for the following meanings:
@@ -242,30 +220,23 @@ static int FREQ_TO_REG( int freq )
  *     -2 -- PWM responds to manual control
  */
 
-static int lm85_zone_map[] = { 1, 2, 3, -1, 0, 23, 123, -2 };
-#define ZONE_FROM_REG(val) (lm85_zone_map[((val)>>5)&0x07])
+static const int lm85_zone_map[] = { 1, 2, 3, -1, 0, 23, 123, -2 };
+#define ZONE_FROM_REG(val)	lm85_zone_map[(val) >> 5]
 
-static int ZONE_TO_REG( int zone )
+static int ZONE_TO_REG(int zone)
 {
 	int i;
 
-	for( i = 0 ; i <= 7 ; ++i )
-		if( zone == lm85_zone_map[i] )
-			break ;
-	if( i > 7 )   /* Not found. */
+	for (i = 0; i <= 7; ++i)
+		if (zone == lm85_zone_map[i])
+			break;
+	if (i > 7)   /* Not found. */
 		i = 3;  /* Always 100% */
-	return( (i & 0x07)<<5 );
+	return i << 5;
 }
 
-#define HYST_TO_REG(val) (SENSORS_LIMIT(((val)+500)/1000,0,15))
-#define HYST_FROM_REG(val) ((val)*1000)
-
-#define OFFSET_TO_REG(val) (SENSORS_LIMIT((val)/25,-127,127))
-#define OFFSET_FROM_REG(val) ((val)*25)
-
-#define PPR_MASK(fan) (0x03<<(fan *2))
-#define PPR_TO_REG(val,fan) (SENSORS_LIMIT((val)-1,0,3)<<(fan *2))
-#define PPR_FROM_REG(val,fan) ((((val)>>(fan * 2))&0x03)+1)
+#define HYST_TO_REG(val)	SENSORS_LIMIT(((val) + 500) / 1000, 0, 15)
+#define HYST_FROM_REG(val)	((val) * 1000)
 
 /* Chip sampling rates
  *
@@ -292,11 +263,11 @@ struct lm85_zone {
 	u8 hyst;	/* Low limit hysteresis. (0-15) */
 	u8 range;	/* Temp range, encoded */
 	s8 critical;	/* "All fans ON" temp limit */
-	u8 off_desired; /* Actual "off" temperature specified.  Preserved 
+	u8 off_desired; /* Actual "off" temperature specified.  Preserved
 			 * to prevent "drift" as other autofan control
 			 * values change.
 			 */
-	u8 max_desired; /* Actual "max" temperature specified.  Preserved 
+	u8 max_desired; /* Actual "max" temperature specified.  Preserved
 			 * to prevent "drift" as other autofan control
 			 * values change.
 			 */
@@ -327,23 +298,13 @@ struct lm85_data {
 	s8 temp[3];		/* Register value */
 	s8 temp_min[3];		/* Register value */
 	s8 temp_max[3];		/* Register value */
-	s8 temp_offset[3];	/* Register value */
 	u16 fan[4];		/* Register value */
 	u16 fan_min[4];		/* Register value */
 	u8 pwm[3];		/* Register value */
-	u8 spinup_ctl;		/* Register encoding, combined */
-	u8 tach_mode;		/* Register encoding, combined */
 	u8 temp_ext[3];		/* Decoded values */
 	u8 in_ext[8];		/* Decoded values */
-	u8 fan_ppr;		/* Register value */
-	u8 smooth[3];		/* Register encoding */
 	u8 vid;			/* Register value */
 	u8 vrm;			/* VRM version */
-	u8 syncpwm3;		/* Saved PWM3 for TACH 2,3,4 config */
-	u8 oppoint[3];		/* Register value */
-	u16 tmin_ctl;		/* Register value */
-	unsigned long therm_total; /* Cummulative therm count */
-	u8 therm_limit;		/* Register value */
 	u32 alarms;		/* Register encoding, combined */
 	struct lm85_autofan autofan[3];
 	struct lm85_zone zone[3];
@@ -355,9 +316,8 @@ static int lm85_detect(struct i2c_adapter *adapter, int address,
 static int lm85_detach_client(struct i2c_client *client);
 
 static int lm85_read_value(struct i2c_client *client, u8 reg);
-static int lm85_write_value(struct i2c_client *client, u8 reg, int value);
+static void lm85_write_value(struct i2c_client *client, u8 reg, int value);
 static struct lm85_data *lm85_update_device(struct device *dev);
-static void lm85_init_client(struct i2c_client *client);
 
 
 static struct i2c_driver lm85_driver = {
@@ -375,7 +335,7 @@ static ssize_t show_fan(struct device *dev, struct device_attribute *attr,
 {
 	int nr = to_sensor_dev_attr(attr)->index;
 	struct lm85_data *data = lm85_update_device(dev);
-	return sprintf(buf,"%d\n", FAN_FROM_REG(data->fan[nr]) );
+	return sprintf(buf, "%d\n", FAN_FROM_REG(data->fan[nr]));
 }
 
 static ssize_t show_fan_min(struct device *dev, struct device_attribute *attr,
@@ -383,7 +343,7 @@ static ssize_t show_fan_min(struct device *dev, struct device_attribute *attr,
 {
 	int nr = to_sensor_dev_attr(attr)->index;
 	struct lm85_data *data = lm85_update_device(dev);
-	return sprintf(buf,"%d\n", FAN_FROM_REG(data->fan_min[nr]) );
+	return sprintf(buf, "%d\n", FAN_FROM_REG(data->fan_min[nr]));
 }
 
 static ssize_t set_fan_min(struct device *dev, struct device_attribute *attr,
@@ -414,7 +374,8 @@ show_fan_offset(4);
 
 /* vid, vrm, alarms */
 
-static ssize_t show_vid_reg(struct device *dev, struct device_attribute *attr, char *buf)
+static ssize_t show_vid_reg(struct device *dev, struct device_attribute *attr,
+		char *buf)
 {
 	struct lm85_data *data = lm85_update_device(dev);
 	int vid;
@@ -432,13 +393,15 @@ static ssize_t show_vid_reg(struct device *dev, struct device_attribute *attr, c
 
 static DEVICE_ATTR(cpu0_vid, S_IRUGO, show_vid_reg, NULL);
 
-static ssize_t show_vrm_reg(struct device *dev, struct device_attribute *attr, char *buf)
+static ssize_t show_vrm_reg(struct device *dev, struct device_attribute *attr,
+		char *buf)
 {
 	struct lm85_data *data = dev_get_drvdata(dev);
 	return sprintf(buf, "%ld\n", (long) data->vrm);
 }
 
-static ssize_t store_vrm_reg(struct device *dev, struct device_attribute *attr, const char *buf, size_t count)
+static ssize_t store_vrm_reg(struct device *dev, struct device_attribute *attr,
+		const char *buf, size_t count)
 {
 	struct lm85_data *data = dev_get_drvdata(dev);
 	data->vrm = simple_strtoul(buf, NULL, 10);
@@ -447,7 +410,8 @@ static ssize_t store_vrm_reg(struct device *dev, struct device_attribute *attr,
 
 static DEVICE_ATTR(vrm, S_IRUGO | S_IWUSR, show_vrm_reg, store_vrm_reg);
 
-static ssize_t show_alarms_reg(struct device *dev, struct device_attribute *attr, char *buf)
+static ssize_t show_alarms_reg(struct device *dev, struct device_attribute
+		*attr, char *buf)
 {
 	struct lm85_data *data = lm85_update_device(dev);
 	return sprintf(buf, "%u\n", data->alarms);
@@ -488,7 +452,7 @@ static ssize_t show_pwm(struct device *dev, struct device_attribute *attr,
 {
 	int nr = to_sensor_dev_attr(attr)->index;
 	struct lm85_data *data = lm85_update_device(dev);
-	return sprintf(buf,"%d\n", PWM_FROM_REG(data->pwm[nr]) );
+	return sprintf(buf, "%d\n", PWM_FROM_REG(data->pwm[nr]));
 }
 
 static ssize_t set_pwm(struct device *dev, struct device_attribute *attr,
@@ -581,17 +545,16 @@ static ssize_t show_in(struct device *dev, struct device_attribute *attr,
 {
 	int nr = to_sensor_dev_attr(attr)->index;
 	struct lm85_data *data = lm85_update_device(dev);
-	return sprintf(	buf, "%d\n", INSEXT_FROM_REG(nr,
-						     data->in[nr],
-						     data->in_ext[nr]));
+	return sprintf(buf, "%d\n", INSEXT_FROM_REG(nr, data->in[nr],
+						    data->in_ext[nr]));
 }
 
-static ssize_t show_in_min(struct device *dev,  struct device_attribute *attr,
+static ssize_t show_in_min(struct device *dev, struct device_attribute *attr,
 		char *buf)
 {
 	int nr = to_sensor_dev_attr(attr)->index;
 	struct lm85_data *data = lm85_update_device(dev);
-	return sprintf(buf,"%d\n", INS_FROM_REG(nr, data->in_min[nr]) );
+	return sprintf(buf, "%d\n", INS_FROM_REG(nr, data->in_min[nr]));
 }
 
 static ssize_t set_in_min(struct device *dev, struct device_attribute *attr,
@@ -614,7 +577,7 @@ static ssize_t show_in_max(struct device *dev, struct device_attribute *attr,
 {
 	int nr = to_sensor_dev_attr(attr)->index;
 	struct lm85_data *data = lm85_update_device(dev);
-	return sprintf(buf,"%d\n", INS_FROM_REG(nr, data->in_max[nr]) );
+	return sprintf(buf, "%d\n", INS_FROM_REG(nr, data->in_max[nr]));
 }
 
 static ssize_t set_in_max(struct device *dev, struct device_attribute *attr,
@@ -656,8 +619,8 @@ static ssize_t show_temp(struct device *dev, struct device_attribute *attr,
 {
 	int nr = to_sensor_dev_attr(attr)->index;
 	struct lm85_data *data = lm85_update_device(dev);
-	return sprintf(buf,"%d\n", TEMPEXT_FROM_REG(data->temp[nr],
-						    data->temp_ext[nr]));
+	return sprintf(buf, "%d\n", TEMPEXT_FROM_REG(data->temp[nr],
+						     data->temp_ext[nr]));
 }
 
 static ssize_t show_temp_min(struct device *dev, struct device_attribute *attr,
@@ -665,7 +628,7 @@ static ssize_t show_temp_min(struct device *dev, struct device_attribute *attr,
 {
 	int nr = to_sensor_dev_attr(attr)->index;
 	struct lm85_data *data = lm85_update_device(dev);
-	return sprintf(buf,"%d\n", TEMP_FROM_REG(data->temp_min[nr]) );
+	return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp_min[nr]));
 }
 
 static ssize_t set_temp_min(struct device *dev, struct device_attribute *attr,
@@ -688,7 +651,7 @@ static ssize_t show_temp_max(struct device *dev, struct device_attribute *attr,
 {
 	int nr = to_sensor_dev_attr(attr)->index;
 	struct lm85_data *data = lm85_update_device(dev);
-	return sprintf(buf,"%d\n", TEMP_FROM_REG(data->temp_max[nr]) );
+	return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp_max[nr]));
 }
 
 static ssize_t set_temp_max(struct device *dev, struct device_attribute *attr,
@@ -697,7 +660,7 @@ static ssize_t set_temp_max(struct device *dev, struct device_attribute *attr,
 	int nr = to_sensor_dev_attr(attr)->index;
 	struct i2c_client *client = to_i2c_client(dev);
 	struct lm85_data *data = i2c_get_clientdata(client);
-	long val = simple_strtol(buf, NULL, 10);	
+	long val = simple_strtol(buf, NULL, 10);
 
 	mutex_lock(&data->update_lock);
 	data->temp_max[nr] = TEMP_TO_REG(val);
@@ -726,7 +689,7 @@ static ssize_t show_pwm_auto_channels(struct device *dev,
 {
 	int nr = to_sensor_dev_attr(attr)->index;
 	struct lm85_data *data = lm85_update_device(dev);
-	return sprintf(buf,"%d\n", ZONE_FROM_REG(data->autofan[nr].config));
+	return sprintf(buf, "%d\n", ZONE_FROM_REG(data->autofan[nr].config));
 }
 
 static ssize_t set_pwm_auto_channels(struct device *dev,
@@ -735,11 +698,11 @@ static ssize_t set_pwm_auto_channels(struct device *dev,
 	int nr = to_sensor_dev_attr(attr)->index;
 	struct i2c_client *client = to_i2c_client(dev);
 	struct lm85_data *data = i2c_get_clientdata(client);
-	long val = simple_strtol(buf, NULL, 10);   
+	long val = simple_strtol(buf, NULL, 10);
 
 	mutex_lock(&data->update_lock);
 	data->autofan[nr].config = (data->autofan[nr].config & (~0xe0))
-		| ZONE_TO_REG(val) ;
+		| ZONE_TO_REG(val);
 	lm85_write_value(client, LM85_REG_AFAN_CONFIG(nr),
 		data->autofan[nr].config);
 	mutex_unlock(&data->update_lock);
@@ -751,7 +714,7 @@ static ssize_t show_pwm_auto_pwm_min(struct device *dev,
 {
 	int nr = to_sensor_dev_attr(attr)->index;
 	struct lm85_data *data = lm85_update_device(dev);
-	return sprintf(buf,"%d\n", PWM_FROM_REG(data->autofan[nr].min_pwm));
+	return sprintf(buf, "%d\n", PWM_FROM_REG(data->autofan[nr].min_pwm));
 }
 
 static ssize_t set_pwm_auto_pwm_min(struct device *dev,
@@ -775,7 +738,7 @@ static ssize_t show_pwm_auto_pwm_minctl(struct device *dev,
 {
 	int nr = to_sensor_dev_attr(attr)->index;
 	struct lm85_data *data = lm85_update_device(dev);
-	return sprintf(buf,"%d\n", data->autofan[nr].min_off);
+	return sprintf(buf, "%d\n", data->autofan[nr].min_off);
 }
 
 static ssize_t set_pwm_auto_pwm_minctl(struct device *dev,
@@ -785,15 +748,15 @@ static ssize_t set_pwm_auto_pwm_minctl(struct device *dev,
 	struct i2c_client *client = to_i2c_client(dev);
 	struct lm85_data *data = i2c_get_clientdata(client);
 	long val = simple_strtol(buf, NULL, 10);
+	u8 tmp;
 
 	mutex_lock(&data->update_lock);
 	data->autofan[nr].min_off = val;
-	lm85_write_value(client, LM85_REG_AFAN_SPIKE1, data->smooth[0]
-		| data->syncpwm3
-		| (data->autofan[0].min_off ? 0x20 : 0)
-		| (data->autofan[1].min_off ? 0x40 : 0)
-		| (data->autofan[2].min_off ? 0x80 : 0)
-	);
+	tmp = lm85_read_value(client, LM85_REG_AFAN_SPIKE1);
+	tmp &= ~(0x20 << nr);
+	if (data->autofan[nr].min_off)
+		tmp |= 0x20 << nr;
+	lm85_write_value(client, LM85_REG_AFAN_SPIKE1, tmp);
 	mutex_unlock(&data->update_lock);
 	return count;
 }
@@ -803,7 +766,7 @@ static ssize_t show_pwm_auto_pwm_freq(struct device *dev,
 {
 	int nr = to_sensor_dev_attr(attr)->index;
 	struct lm85_data *data = lm85_update_device(dev);
-	return sprintf(buf,"%d\n", FREQ_FROM_REG(data->autofan[nr].freq));
+	return sprintf(buf, "%d\n", FREQ_FROM_REG(data->autofan[nr].freq));
 }
 
 static ssize_t set_pwm_auto_pwm_freq(struct device *dev,
@@ -818,8 +781,7 @@ static ssize_t set_pwm_auto_pwm_freq(struct device *dev,
 	data->autofan[nr].freq = FREQ_TO_REG(val);
 	lm85_write_value(client, LM85_REG_AFAN_RANGE(nr),
 		(data->zone[nr].range << 4)
-		| data->autofan[nr].freq
-	); 
+		| data->autofan[nr].freq);
 	mutex_unlock(&data->update_lock);
 	return count;
 }
@@ -849,7 +811,7 @@ static ssize_t show_temp_auto_temp_off(struct device *dev,
 {
 	int nr = to_sensor_dev_attr(attr)->index;
 	struct lm85_data *data = lm85_update_device(dev);
-	return sprintf(buf,"%d\n", TEMP_FROM_REG(data->zone[nr].limit) -
+	return sprintf(buf, "%d\n", TEMP_FROM_REG(data->zone[nr].limit) -
 		HYST_FROM_REG(data->zone[nr].hyst));
 }
 
@@ -866,15 +828,13 @@ static ssize_t set_temp_auto_temp_off(struct device *dev,
 	min = TEMP_FROM_REG(data->zone[nr].limit);
 	data->zone[nr].off_desired = TEMP_TO_REG(val);
 	data->zone[nr].hyst = HYST_TO_REG(min - val);
-	if ( nr == 0 || nr == 1 ) {
+	if (nr == 0 || nr == 1) {
 		lm85_write_value(client, LM85_REG_AFAN_HYST1,
 			(data->zone[0].hyst << 4)
-			| data->zone[1].hyst
-			);
+			| data->zone[1].hyst);
 	} else {
 		lm85_write_value(client, LM85_REG_AFAN_HYST2,
-			(data->zone[2].hyst << 4)
-		);
+			(data->zone[2].hyst << 4));
 	}
 	mutex_unlock(&data->update_lock);
 	return count;
@@ -885,7 +845,7 @@ static ssize_t show_temp_auto_temp_min(struct device *dev,
 {
 	int nr = to_sensor_dev_attr(attr)->index;
 	struct lm85_data *data = lm85_update_device(dev);
-	return sprintf(buf,"%d\n", TEMP_FROM_REG(data->zone[nr].limit) );
+	return sprintf(buf, "%d\n", TEMP_FROM_REG(data->zone[nr].limit));
 }
 
 static ssize_t set_temp_auto_temp_min(struct device *dev,
@@ -913,15 +873,13 @@ static ssize_t set_temp_auto_temp_min(struct device *dev,
 	data->zone[nr].hyst = HYST_TO_REG(TEMP_FROM_REG(
 		data->zone[nr].limit) - TEMP_FROM_REG(
 		data->zone[nr].off_desired));
-	if ( nr == 0 || nr == 1 ) {
+	if (nr == 0 || nr == 1) {
 		lm85_write_value(client, LM85_REG_AFAN_HYST1,
 			(data->zone[0].hyst << 4)
-			| data->zone[1].hyst
-			);
+			| data->zone[1].hyst);
 	} else {
 		lm85_write_value(client, LM85_REG_AFAN_HYST2,
-			(data->zone[2].hyst << 4)
-		);
+			(data->zone[2].hyst << 4));
 	}
 	mutex_unlock(&data->update_lock);
 	return count;
@@ -932,7 +890,7 @@ static ssize_t show_temp_auto_temp_max(struct device *dev,
 {
 	int nr = to_sensor_dev_attr(attr)->index;
 	struct lm85_data *data = lm85_update_device(dev);
-	return sprintf(buf,"%d\n", TEMP_FROM_REG(data->zone[nr].limit) +
+	return sprintf(buf, "%d\n", TEMP_FROM_REG(data->zone[nr].limit) +
 		RANGE_FROM_REG(data->zone[nr].range));
 }
 
@@ -962,11 +920,11 @@ static ssize_t show_temp_auto_temp_crit(struct device *dev,
 {
 	int nr = to_sensor_dev_attr(attr)->index;
 	struct lm85_data *data = lm85_update_device(dev);
-	return sprintf(buf,"%d\n", TEMP_FROM_REG(data->zone[nr].critical));
+	return sprintf(buf, "%d\n", TEMP_FROM_REG(data->zone[nr].critical));
 }
 
 static ssize_t set_temp_auto_temp_crit(struct device *dev,
-		struct device_attribute *attr,const char *buf, size_t count)
+		struct device_attribute *attr, const char *buf, size_t count)
 {
 	int nr = to_sensor_dev_attr(attr)->index;
 	struct i2c_client *client = to_i2c_client(dev);
@@ -1127,20 +1085,37 @@ static const struct attribute_group lm85_group_in567 = {
 	.attrs = lm85_attributes_in567,
 };
 
+static void lm85_init_client(struct i2c_client *client)
+{
+	int value;
+
+	/* Start monitoring if needed */
+	value = lm85_read_value(client, LM85_REG_CONFIG);
+	if (!(value & 0x01)) {
+		dev_info(&client->dev, "Starting monitoring\n");
+		lm85_write_value(client, LM85_REG_CONFIG, value | 0x01);
+	}
+
+	/* Warn about unusual configuration bits */
+	if (value & 0x02)
+		dev_warn(&client->dev, "Device configuration is locked\n");
+	if (!(value & 0x04))
+		dev_warn(&client->dev, "Device is not ready\n");
+}
+
 static int lm85_detect(struct i2c_adapter *adapter, int address,
 		int kind)
 {
-	int company, verstep ;
-	struct i2c_client *new_client = NULL;
+	int company, verstep;
+	struct i2c_client *client;
 	struct lm85_data *data;
 	int err = 0;
-	const char *type_name = "";
+	const char *type_name;
 
-	if (!i2c_check_functionality(adapter,
-					I2C_FUNC_SMBUS_BYTE_DATA)) {
+	if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) {
 		/* We need to be able to do byte I/O */
-		goto ERROR0 ;
-	};
+		goto ERROR0;
+	}
 
 	/* OK. For now, we presume we have a valid client. We now create the
 	   client structure, even though we cannot fill it completely yet.
@@ -1151,138 +1126,145 @@ static int lm85_detect(struct i2c_adapter *adapter, int address,
 		goto ERROR0;
 	}
 
-	new_client = &data->client;
-	i2c_set_clientdata(new_client, data);
-	new_client->addr = address;
-	new_client->adapter = adapter;
-	new_client->driver = &lm85_driver;
-	new_client->flags = 0;
+	client = &data->client;
+	i2c_set_clientdata(client, data);
+	client->addr = address;
+	client->adapter = adapter;
+	client->driver = &lm85_driver;
 
 	/* Now, we do the remaining detection. */
 
-	company = lm85_read_value(new_client, LM85_REG_COMPANY);
-	verstep = lm85_read_value(new_client, LM85_REG_VERSTEP);
+	company = lm85_read_value(client, LM85_REG_COMPANY);
+	verstep = lm85_read_value(client, LM85_REG_VERSTEP);
 
 	dev_dbg(&adapter->dev, "Detecting device at %d,0x%02x with"
 		" COMPANY: 0x%02x and VERSTEP: 0x%02x\n",
-		i2c_adapter_id(new_client->adapter), new_client->addr,
+		i2c_adapter_id(client->adapter), client->addr,
 		company, verstep);
 
 	/* If auto-detecting, Determine the chip type. */
 	if (kind <= 0) {
 		dev_dbg(&adapter->dev, "Autodetecting device at %d,0x%02x ...\n",
-			i2c_adapter_id(adapter), address );
-		if( company == LM85_COMPANY_NATIONAL
-		    && verstep == LM85_VERSTEP_LM85C ) {
-			kind = lm85c ;
-		} else if( company == LM85_COMPANY_NATIONAL
-		    && verstep == LM85_VERSTEP_LM85B ) {
-			kind = lm85b ;
-		} else if( company == LM85_COMPANY_NATIONAL
-		    && (verstep & LM85_VERSTEP_VMASK) == LM85_VERSTEP_GENERIC ) {
+			i2c_adapter_id(adapter), address);
+		if (company == LM85_COMPANY_NATIONAL
+		    && verstep == LM85_VERSTEP_LM85C) {
+			kind = lm85c;
+		} else if (company == LM85_COMPANY_NATIONAL
+		    && verstep == LM85_VERSTEP_LM85B) {
+			kind = lm85b;
+		} else if (company == LM85_COMPANY_NATIONAL
+		    && (verstep & LM85_VERSTEP_VMASK) == LM85_VERSTEP_GENERIC) {
 			dev_err(&adapter->dev, "Unrecognized version/stepping 0x%02x"
 				" Defaulting to LM85.\n", verstep);
-			kind = any_chip ;
-		} else if( company == LM85_COMPANY_ANALOG_DEV
-		    && verstep == LM85_VERSTEP_ADM1027 ) {
-			kind = adm1027 ;
-		} else if( company == LM85_COMPANY_ANALOG_DEV
+			kind = any_chip;
+		} else if (company == LM85_COMPANY_ANALOG_DEV
+		    && verstep == LM85_VERSTEP_ADM1027) {
+			kind = adm1027;
+		} else if (company == LM85_COMPANY_ANALOG_DEV
 		    && (verstep == LM85_VERSTEP_ADT7463
-			 || verstep == LM85_VERSTEP_ADT7463C) ) {
-			kind = adt7463 ;
-		} else if( company == LM85_COMPANY_ANALOG_DEV
-		    && (verstep & LM85_VERSTEP_VMASK) == LM85_VERSTEP_GENERIC ) {
+			 || verstep == LM85_VERSTEP_ADT7463C)) {
+			kind = adt7463;
+		} else if (company == LM85_COMPANY_ANALOG_DEV
+		    && (verstep & LM85_VERSTEP_VMASK) == LM85_VERSTEP_GENERIC) {
 			dev_err(&adapter->dev, "Unrecognized version/stepping 0x%02x"
-				" Defaulting to Generic LM85.\n", verstep );
-			kind = any_chip ;
-		} else if( company == LM85_COMPANY_SMSC
+				" Defaulting to Generic LM85.\n", verstep);
+			kind = any_chip;
+		} else if (company == LM85_COMPANY_SMSC
 		    && (verstep == LM85_VERSTEP_EMC6D100_A0
-			 || verstep == LM85_VERSTEP_EMC6D100_A1) ) {
+			 || verstep == LM85_VERSTEP_EMC6D100_A1)) {
 			/* Unfortunately, we can't tell a '100 from a '101
 			 * from the registers.  Since a '101 is a '100
 			 * in a package with fewer pins and therefore no
 			 * 3.3V, 1.5V or 1.8V inputs, perhaps if those
 			 * inputs read 0, then it's a '101.
 			 */
-			kind = emc6d100 ;
-		} else if( company == LM85_COMPANY_SMSC
+			kind = emc6d100;
+		} else if (company == LM85_COMPANY_SMSC
 		    && verstep == LM85_VERSTEP_EMC6D102) {
-			kind = emc6d102 ;
-		} else if( company == LM85_COMPANY_SMSC
+			kind = emc6d102;
+		} else if (company == LM85_COMPANY_SMSC
 		    && (verstep & LM85_VERSTEP_VMASK) == LM85_VERSTEP_GENERIC) {
 			dev_err(&adapter->dev, "lm85: Detected SMSC chip\n");
 			dev_err(&adapter->dev, "lm85: Unrecognized version/stepping 0x%02x"
-			    " Defaulting to Generic LM85.\n", verstep );
-			kind = any_chip ;
-		} else if( kind == any_chip
+			    " Defaulting to Generic LM85.\n", verstep);
+			kind = any_chip;
+		} else if (kind == any_chip
 		    && (verstep & LM85_VERSTEP_VMASK) == LM85_VERSTEP_GENERIC) {
 			dev_err(&adapter->dev, "Generic LM85 Version 6 detected\n");
 			/* Leave kind as "any_chip" */
 		} else {
 			dev_dbg(&adapter->dev, "Autodetection failed\n");
-			/* Not an LM85 ... */
-			if( kind == any_chip ) {  /* User used force=x,y */
+			/* Not an LM85... */
+			if (kind == any_chip) {  /* User used force=x,y */
 				dev_err(&adapter->dev, "Generic LM85 Version 6 not"
 					" found at %d,0x%02x. Try force_lm85c.\n",
-					i2c_adapter_id(adapter), address );
+					i2c_adapter_id(adapter), address);
 			}
-			err = 0 ;
+			err = 0;
 			goto ERROR1;
 		}
 	}
 
 	/* Fill in the chip specific driver values */
-	if ( kind == any_chip ) {
-		type_name = "lm85";
-	} else if ( kind == lm85b ) {
+	switch (kind) {
+	case lm85b:
 		type_name = "lm85b";
-	} else if ( kind == lm85c ) {
+		break;
+	case lm85c:
 		type_name = "lm85c";
-	} else if ( kind == adm1027 ) {
+		break;
+	case adm1027:
 		type_name = "adm1027";
-	} else if ( kind == adt7463 ) {
+		break;
+	case adt7463:
 		type_name = "adt7463";
-	} else if ( kind == emc6d100){
+		break;
+	case emc6d100:
 		type_name = "emc6d100";
-	} else if ( kind == emc6d102 ) {
+		break;
+	case emc6d102:
 		type_name = "emc6d102";
+		break;
+	default:
+		type_name = "lm85";
 	}
-	strlcpy(new_client->name, type_name, I2C_NAME_SIZE);
+	strlcpy(client->name, type_name, I2C_NAME_SIZE);
 
 	/* Fill in the remaining client fields */
 	data->type = kind;
-	data->valid = 0;
 	mutex_init(&data->update_lock);
 
 	/* Tell the I2C layer a new client has arrived */
-	if ((err = i2c_attach_client(new_client)))
+	err = i2c_attach_client(client);
+	if (err)
 		goto ERROR1;
 
 	/* Set the VRM version */
 	data->vrm = vid_which_vrm();
 
 	/* Initialize the LM85 chip */
-	lm85_init_client(new_client);
+	lm85_init_client(client);
 
 	/* Register sysfs hooks */
-	if ((err = sysfs_create_group(&new_client->dev.kobj, &lm85_group)))
+	err = sysfs_create_group(&client->dev.kobj, &lm85_group);
+	if (err)
 		goto ERROR2;
 
 	/* The ADT7463 has an optional VRM 10 mode where pin 21 is used
 	   as a sixth digital VID input rather than an analog input. */
-	data->vid = lm85_read_value(new_client, LM85_REG_VID);
+	data->vid = lm85_read_value(client, LM85_REG_VID);
 	if (!(kind == adt7463 && (data->vid & 0x80)))
-		if ((err = sysfs_create_group(&new_client->dev.kobj,
+		if ((err = sysfs_create_group(&client->dev.kobj,
 					&lm85_group_in4)))
 			goto ERROR3;
 
 	/* The EMC6D100 has 3 additional voltage inputs */
 	if (kind == emc6d100)
-		if ((err = sysfs_create_group(&new_client->dev.kobj,
+		if ((err = sysfs_create_group(&client->dev.kobj,
 					&lm85_group_in567)))
 			goto ERROR3;
 
-	data->hwmon_dev = hwmon_device_register(&new_client->dev);
+	data->hwmon_dev = hwmon_device_register(&client->dev);
 	if (IS_ERR(data->hwmon_dev)) {
 		err = PTR_ERR(data->hwmon_dev);
 		goto ERROR3;
@@ -1291,16 +1273,16 @@ static int lm85_detect(struct i2c_adapter *adapter, int address,
 	return 0;
 
 	/* Error out and cleanup code */
-    ERROR3:
-	sysfs_remove_group(&new_client->dev.kobj, &lm85_group);
-	sysfs_remove_group(&new_client->dev.kobj, &lm85_group_in4);
+ ERROR3:
+	sysfs_remove_group(&client->dev.kobj, &lm85_group);
+	sysfs_remove_group(&client->dev.kobj, &lm85_group_in4);
 	if (kind == emc6d100)
-		sysfs_remove_group(&new_client->dev.kobj, &lm85_group_in567);
-    ERROR2:
-	i2c_detach_client(new_client);
-    ERROR1:
+		sysfs_remove_group(&client->dev.kobj, &lm85_group_in567);
+ ERROR2:
+	i2c_detach_client(client);
+ ERROR1:
 	kfree(data);
-    ERROR0:
+ ERROR0:
 	return err;
 }
 
@@ -1323,100 +1305,46 @@ static int lm85_read_value(struct i2c_client *client, u8 reg)
 	int res;
 
 	/* What size location is it? */
-	switch( reg ) {
-	case LM85_REG_FAN(0) :  /* Read WORD data */
-	case LM85_REG_FAN(1) :
-	case LM85_REG_FAN(2) :
-	case LM85_REG_FAN(3) :
-	case LM85_REG_FAN_MIN(0) :
-	case LM85_REG_FAN_MIN(1) :
-	case LM85_REG_FAN_MIN(2) :
-	case LM85_REG_FAN_MIN(3) :
-	case LM85_REG_ALARM1 :	/* Read both bytes at once */
-		res = i2c_smbus_read_byte_data(client, reg) & 0xff ;
-		res |= i2c_smbus_read_byte_data(client, reg+1) << 8 ;
-		break ;
-	case ADT7463_REG_TMIN_CTL1 :  /* Read WORD MSB, LSB */
-		res = i2c_smbus_read_byte_data(client, reg) << 8 ;
-		res |= i2c_smbus_read_byte_data(client, reg+1) & 0xff ;
-		break ;
+	switch (reg) {
+	case LM85_REG_FAN(0):  /* Read WORD data */
+	case LM85_REG_FAN(1):
+	case LM85_REG_FAN(2):
+	case LM85_REG_FAN(3):
+	case LM85_REG_FAN_MIN(0):
+	case LM85_REG_FAN_MIN(1):
+	case LM85_REG_FAN_MIN(2):
+	case LM85_REG_FAN_MIN(3):
+	case LM85_REG_ALARM1:	/* Read both bytes at once */
+		res = i2c_smbus_read_byte_data(client, reg) & 0xff;
+		res |= i2c_smbus_read_byte_data(client, reg + 1) << 8;
+		break;
 	default:	/* Read BYTE data */
 		res = i2c_smbus_read_byte_data(client, reg);
-		break ;
+		break;
 	}
 
-	return res ;
+	return res;
 }
 
-static int lm85_write_value(struct i2c_client *client, u8 reg, int value)
+static void lm85_write_value(struct i2c_client *client, u8 reg, int value)
 {
-	int res ;
-
-	switch( reg ) {
-	case LM85_REG_FAN(0) :  /* Write WORD data */
-	case LM85_REG_FAN(1) :
-	case LM85_REG_FAN(2) :
-	case LM85_REG_FAN(3) :
-	case LM85_REG_FAN_MIN(0) :
-	case LM85_REG_FAN_MIN(1) :
-	case LM85_REG_FAN_MIN(2) :
-	case LM85_REG_FAN_MIN(3) :
+	switch (reg) {
+	case LM85_REG_FAN(0):  /* Write WORD data */
+	case LM85_REG_FAN(1):
+	case LM85_REG_FAN(2):
+	case LM85_REG_FAN(3):
+	case LM85_REG_FAN_MIN(0):
+	case LM85_REG_FAN_MIN(1):
+	case LM85_REG_FAN_MIN(2):
+	case LM85_REG_FAN_MIN(3):
 	/* NOTE: ALARM is read only, so not included here */
-		res = i2c_smbus_write_byte_data(client, reg, value & 0xff) ;
-		res |= i2c_smbus_write_byte_data(client, reg+1, (value>>8) & 0xff) ;
-		break ;
-	case ADT7463_REG_TMIN_CTL1 :  /* Write WORD MSB, LSB */
-		res = i2c_smbus_write_byte_data(client, reg, (value>>8) & 0xff);
-		res |= i2c_smbus_write_byte_data(client, reg+1, value & 0xff) ;
-		break ;
+		i2c_smbus_write_byte_data(client, reg, value & 0xff);
+		i2c_smbus_write_byte_data(client, reg + 1, value >> 8);
+		break;
 	default:	/* Write BYTE data */
-		res = i2c_smbus_write_byte_data(client, reg, value);
-		break ;
+		i2c_smbus_write_byte_data(client, reg, value);
+		break;
 	}
-
-	return res ;
-}
-
-static void lm85_init_client(struct i2c_client *client)
-{
-	int value;
-	struct lm85_data *data = i2c_get_clientdata(client);
-
-	dev_dbg(&client->dev, "Initializing device\n");
-
-	/* Warn if part was not "READY" */
-	value = lm85_read_value(client, LM85_REG_CONFIG);
-	dev_dbg(&client->dev, "LM85_REG_CONFIG is: 0x%02x\n", value);
-	if( value & 0x02 ) {
-		dev_err(&client->dev, "Client (%d,0x%02x) config is locked.\n",
-			    i2c_adapter_id(client->adapter), client->addr );
-	};
-	if( ! (value & 0x04) ) {
-		dev_err(&client->dev, "Client (%d,0x%02x) is not ready.\n",
-			    i2c_adapter_id(client->adapter), client->addr );
-	};
-	if( value & 0x10
-	    && ( data->type == adm1027
-		|| data->type == adt7463 ) ) {
-		dev_err(&client->dev, "Client (%d,0x%02x) VxI mode is set.  "
-			"Please report this to the lm85 maintainer.\n",
-			    i2c_adapter_id(client->adapter), client->addr );
-	};
-
-	/* WE INTENTIONALLY make no changes to the limits,
-	 *   offsets, pwms, fans and zones.  If they were
-	 *   configured, we don't want to mess with them.
-	 *   If they weren't, the default is 100% PWM, no
-	 *   control and will suffice until 'sensors -s'
-	 *   can be run by the user.
-	 */
-
-	/* Start monitoring */
-	value = lm85_read_value(client, LM85_REG_CONFIG);
-	/* Try to clear LOCK, Set START, save everything else */
-	value = (value & ~ 0x02) | 0x01 ;
-	dev_dbg(&client->dev, "Setting CONFIG to: 0x%02x\n", value);
-	lm85_write_value(client, LM85_REG_CONFIG, value);
 }
 
 static struct lm85_data *lm85_update_device(struct device *dev)
@@ -1427,28 +1355,30 @@ static struct lm85_data *lm85_update_device(struct device *dev)
 
 	mutex_lock(&data->update_lock);
 
-	if ( !data->valid ||
-	     time_after(jiffies, data->last_reading + LM85_DATA_INTERVAL) ) {
+	if (!data->valid ||
+	     time_after(jiffies, data->last_reading + LM85_DATA_INTERVAL)) {
 		/* Things that change quickly */
 		dev_dbg(&client->dev, "Reading sensor values\n");
-		
+
 		/* Have to read extended bits first to "freeze" the
 		 * more significant bits that are read later.
 		 * There are 2 additional resolution bits per channel and we
 		 * have room for 4, so we shift them to the left.
 		 */
-		if ( (data->type == adm1027) || (data->type == adt7463) ) {
+		if (data->type == adm1027 || data->type == adt7463) {
 			int ext1 = lm85_read_value(client,
 						   ADM1027_REG_EXTEND_ADC1);
 			int ext2 =  lm85_read_value(client,
 						    ADM1027_REG_EXTEND_ADC2);
 			int val = (ext1 << 8) + ext2;
 
-			for(i = 0; i <= 4; i++)
-				data->in_ext[i] = ((val>>(i * 2))&0x03) << 2;
+			for (i = 0; i <= 4; i++)
+				data->in_ext[i] =
+					((val >> (i * 2)) & 0x03) << 2;
 
-			for(i = 0; i <= 2; i++)
-				data->temp_ext[i] = (val>>((i + 4) * 2))&0x0c;
+			for (i = 0; i <= 2; i++)
+				data->temp_ext[i] =
+					(val >> ((i + 4) * 2)) & 0x0c;
 		}
 
 		data->vid = lm85_read_value(client, LM85_REG_VID);
@@ -1456,6 +1386,8 @@ static struct lm85_data *lm85_update_device(struct device *dev)
 		for (i = 0; i <= 3; ++i) {
 			data->in[i] =
 			    lm85_read_value(client, LM85_REG_IN(i));
+			data->fan[i] =
+			    lm85_read_value(client, LM85_REG_FAN(i));
 		}
 
 		if (!(data->type == adt7463 && (data->vid & 0x80))) {
@@ -1463,38 +1395,25 @@ static struct lm85_data *lm85_update_device(struct device *dev)
 				      LM85_REG_IN(4));
 		}
 
-		for (i = 0; i <= 3; ++i) {
-			data->fan[i] =
-			    lm85_read_value(client, LM85_REG_FAN(i));
-		}
-
 		for (i = 0; i <= 2; ++i) {
 			data->temp[i] =
 			    lm85_read_value(client, LM85_REG_TEMP(i));
-		}
-
-		for (i = 0; i <= 2; ++i) {
 			data->pwm[i] =
 			    lm85_read_value(client, LM85_REG_PWM(i));
 		}
 
 		data->alarms = lm85_read_value(client, LM85_REG_ALARM1);
 
-		if ( data->type == adt7463 ) {
-			if( data->therm_total < ULONG_MAX - 256 ) {
-			    data->therm_total +=
-				lm85_read_value(client, ADT7463_REG_THERM );
-			}
-		} else if ( data->type == emc6d100 ) {
+		if (data->type == emc6d100) {
 			/* Three more voltage sensors */
 			for (i = 5; i <= 7; ++i) {
-				data->in[i] =
-					lm85_read_value(client, EMC6D100_REG_IN(i));
+				data->in[i] = lm85_read_value(client,
+							EMC6D100_REG_IN(i));
 			}
 			/* More alarm bits */
-			data->alarms |=
-				lm85_read_value(client, EMC6D100_REG_ALARM3) << 16;
-		} else if (data->type == emc6d102 ) {
+			data->alarms |= lm85_read_value(client,
+						EMC6D100_REG_ALARM3) << 16;
+		} else if (data->type == emc6d102) {
 			/* Have to read LSB bits after the MSB ones because
 			   the reading of the MSB bits has frozen the
 			   LSBs (backward from the ADM1027).
@@ -1509,20 +1428,20 @@ static struct lm85_data *lm85_update_device(struct device *dev)
 						   EMC6D102_REG_EXTEND_ADC4);
 			data->in_ext[0] = ext3 & 0x0f;
 			data->in_ext[1] = ext4 & 0x0f;
-			data->in_ext[2] = (ext4 >> 4) & 0x0f;
-			data->in_ext[3] = (ext3 >> 4) & 0x0f;
-			data->in_ext[4] = (ext2 >> 4) & 0x0f;
+			data->in_ext[2] = ext4 >> 4;
+			data->in_ext[3] = ext3 >> 4;
+			data->in_ext[4] = ext2 >> 4;
 
 			data->temp_ext[0] = ext1 & 0x0f;
 			data->temp_ext[1] = ext2 & 0x0f;
-			data->temp_ext[2] = (ext1 >> 4) & 0x0f;
+			data->temp_ext[2] = ext1 >> 4;
 		}
 
-		data->last_reading = jiffies ;
-	};  /* last_reading */
+		data->last_reading = jiffies;
+	}  /* last_reading */
 
-	if ( !data->valid ||
-	     time_after(jiffies, data->last_config + LM85_CONFIG_INTERVAL) ) {
+	if (!data->valid ||
+	     time_after(jiffies, data->last_config + LM85_CONFIG_INTERVAL)) {
 		/* Things that don't change often */
 		dev_dbg(&client->dev, "Reading config values\n");
 
@@ -1531,6 +1450,8 @@ static struct lm85_data *lm85_update_device(struct device *dev)
 			    lm85_read_value(client, LM85_REG_IN_MIN(i));
 			data->in_max[i] =
 			    lm85_read_value(client, LM85_REG_IN_MAX(i));
+			data->fan_min[i] =
+			    lm85_read_value(client, LM85_REG_FAN_MIN(i));
 		}
 
 		if (!(data->type == adt7463 && (data->vid & 0x80))) {
@@ -1540,34 +1461,28 @@ static struct lm85_data *lm85_update_device(struct device *dev)
 					  LM85_REG_IN_MAX(4));
 		}
 
-		if ( data->type == emc6d100 ) {
+		if (data->type == emc6d100) {
 			for (i = 5; i <= 7; ++i) {
-				data->in_min[i] =
-					lm85_read_value(client, EMC6D100_REG_IN_MIN(i));
-				data->in_max[i] =
-					lm85_read_value(client, EMC6D100_REG_IN_MAX(i));
+				data->in_min[i] = lm85_read_value(client,
+						EMC6D100_REG_IN_MIN(i));
+				data->in_max[i] = lm85_read_value(client,
+						EMC6D100_REG_IN_MAX(i));
 			}
 		}
 
-		for (i = 0; i <= 3; ++i) {
-			data->fan_min[i] =
-			    lm85_read_value(client, LM85_REG_FAN_MIN(i));
-		}
-
 		for (i = 0; i <= 2; ++i) {
+			int val;
+
 			data->temp_min[i] =
 			    lm85_read_value(client, LM85_REG_TEMP_MIN(i));
 			data->temp_max[i] =
 			    lm85_read_value(client, LM85_REG_TEMP_MAX(i));
-		}
 
-		for (i = 0; i <= 2; ++i) {
-			int val ;
 			data->autofan[i].config =
 			    lm85_read_value(client, LM85_REG_AFAN_CONFIG(i));
 			val = lm85_read_value(client, LM85_REG_AFAN_RANGE(i));
-			data->autofan[i].freq = val & 0x07 ;
-			data->zone[i].range = (val >> 4) & 0x0f ;
+			data->autofan[i].freq = val & 0x07;
+			data->zone[i].range = val >> 4;
 			data->autofan[i].min_pwm =
 			    lm85_read_value(client, LM85_REG_AFAN_MINPWM(i));
 			data->zone[i].limit =
@@ -1577,50 +1492,19 @@ static struct lm85_data *lm85_update_device(struct device *dev)
 		}
 
 		i = lm85_read_value(client, LM85_REG_AFAN_SPIKE1);
-		data->smooth[0] = i & 0x0f ;
-		data->syncpwm3 = i & 0x10 ;  /* Save PWM3 config */
-		data->autofan[0].min_off = (i & 0x20) != 0 ;
-		data->autofan[1].min_off = (i & 0x40) != 0 ;
-		data->autofan[2].min_off = (i & 0x80) != 0 ;
-		i = lm85_read_value(client, LM85_REG_AFAN_SPIKE2);
-		data->smooth[1] = (i>>4) & 0x0f ;
-		data->smooth[2] = i & 0x0f ;
+		data->autofan[0].min_off = (i & 0x20) != 0;
+		data->autofan[1].min_off = (i & 0x40) != 0;
+		data->autofan[2].min_off = (i & 0x80) != 0;
 
 		i = lm85_read_value(client, LM85_REG_AFAN_HYST1);
-		data->zone[0].hyst = (i>>4) & 0x0f ;
-		data->zone[1].hyst = i & 0x0f ;
+		data->zone[0].hyst = i >> 4;
+		data->zone[1].hyst = i & 0x0f;
 
 		i = lm85_read_value(client, LM85_REG_AFAN_HYST2);
-		data->zone[2].hyst = (i>>4) & 0x0f ;
-
-		if ( (data->type == lm85b) || (data->type == lm85c) ) {
-			data->tach_mode = lm85_read_value(client,
-				LM85_REG_TACH_MODE );
-			data->spinup_ctl = lm85_read_value(client,
-				LM85_REG_SPINUP_CTL );
-		} else if ( (data->type == adt7463) || (data->type == adm1027) ) {
-			if ( data->type == adt7463 ) {
-				for (i = 0; i <= 2; ++i) {
-				    data->oppoint[i] = lm85_read_value(client,
-					ADT7463_REG_OPPOINT(i) );
-				}
-				data->tmin_ctl = lm85_read_value(client,
-					ADT7463_REG_TMIN_CTL1 );
-				data->therm_limit = lm85_read_value(client,
-					ADT7463_REG_THERM_LIMIT );
-			}
-			for (i = 0; i <= 2; ++i) {
-			    data->temp_offset[i] = lm85_read_value(client,
-				ADM1027_REG_TEMP_OFFSET(i) );
-			}
-			data->tach_mode = lm85_read_value(client,
-				ADM1027_REG_CONFIG3 );
-			data->fan_ppr = lm85_read_value(client,
-				ADM1027_REG_FAN_PPR );
-		}
-	
+		data->zone[2].hyst = i >> 4;
+
 		data->last_config = jiffies;
-	};  /* last_config */
+	}  /* last_config */
 
 	data->valid = 1;
 
@@ -1635,17 +1519,15 @@ static int __init sm_lm85_init(void)
 	return i2c_add_driver(&lm85_driver);
 }
 
-static void  __exit sm_lm85_exit(void)
+static void __exit sm_lm85_exit(void)
 {
 	i2c_del_driver(&lm85_driver);
 }
 
-/* Thanks to Richard Barrington for adding the LM85 to sensors-detect.
- * Thanks to Margit Schubert-While <margitsw@t-online.de> for help with
- *     post 2.7.0 CVS changes.
- */
 MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Philip Pokorny <ppokorny@penguincomputing.com>, Margit Schubert-While <margitsw@t-online.de>, Justin Thiessen <jthiessen@penguincomputing.com");
+MODULE_AUTHOR("Philip Pokorny <ppokorny@penguincomputing.com>, "
+	"Margit Schubert-While <margitsw@t-online.de>, "
+	"Justin Thiessen <jthiessen@penguincomputing.com>");
 MODULE_DESCRIPTION("LM85-B, LM85-C driver");
 
 module_init(sm_lm85_init);
diff --git a/drivers/hwmon/thmc50.c b/drivers/hwmon/thmc50.c
index 3b01001108c1..7d97431e132f 100644
--- a/drivers/hwmon/thmc50.c
+++ b/drivers/hwmon/thmc50.c
@@ -55,8 +55,11 @@ I2C_CLIENT_MODULE_PARM(adm1022_temp3, "List of adapter,address pairs "
 static const u8 THMC50_REG_TEMP[] = { 0x27, 0x26, 0x20 };
 static const u8 THMC50_REG_TEMP_MIN[] = { 0x3A, 0x38, 0x2C };
 static const u8 THMC50_REG_TEMP_MAX[] = { 0x39, 0x37, 0x2B };
+static const u8 THMC50_REG_TEMP_CRITICAL[] = { 0x13, 0x14, 0x14 };
+static const u8 THMC50_REG_TEMP_DEFAULT[] = { 0x17, 0x18, 0x18 };
 
 #define THMC50_REG_CONF_nFANOFF			0x20
+#define THMC50_REG_CONF_PROGRAMMED		0x08
 
 /* Each client has this additional data */
 struct thmc50_data {
@@ -72,6 +75,7 @@ struct thmc50_data {
 	s8 temp_input[3];
 	s8 temp_max[3];
 	s8 temp_min[3];
+	s8 temp_critical[3];
 	u8 analog_out;
 	u8 alarms;
 };
@@ -199,6 +203,15 @@ static ssize_t set_temp_max(struct device *dev, struct device_attribute *attr,
 	return count;
 }
 
+static ssize_t show_temp_critical(struct device *dev,
+				  struct device_attribute *attr,
+				  char *buf)
+{
+	int nr = to_sensor_dev_attr(attr)->index;
+	struct thmc50_data *data = thmc50_update_device(dev);
+	return sprintf(buf, "%d\n", data->temp_critical[nr] * 1000);
+}
+
 static ssize_t show_alarm(struct device *dev, struct device_attribute *attr,
 			  char *buf)
 {
@@ -214,7 +227,9 @@ static SENSOR_DEVICE_ATTR(temp##offset##_input, S_IRUGO, show_temp,	\
 static SENSOR_DEVICE_ATTR(temp##offset##_min, S_IRUGO | S_IWUSR,	\
 			show_temp_min, set_temp_min, offset - 1);	\
 static SENSOR_DEVICE_ATTR(temp##offset##_max, S_IRUGO | S_IWUSR,	\
-			show_temp_max, set_temp_max, offset - 1);
+			show_temp_max, set_temp_max, offset - 1);	\
+static SENSOR_DEVICE_ATTR(temp##offset##_crit, S_IRUGO,			\
+			show_temp_critical, NULL, offset - 1);
 
 temp_reg(1);
 temp_reg(2);
@@ -234,10 +249,12 @@ static struct attribute *thmc50_attributes[] = {
 	&sensor_dev_attr_temp1_max.dev_attr.attr,
 	&sensor_dev_attr_temp1_min.dev_attr.attr,
 	&sensor_dev_attr_temp1_input.dev_attr.attr,
+	&sensor_dev_attr_temp1_crit.dev_attr.attr,
 	&sensor_dev_attr_temp1_alarm.dev_attr.attr,
 	&sensor_dev_attr_temp2_max.dev_attr.attr,
 	&sensor_dev_attr_temp2_min.dev_attr.attr,
 	&sensor_dev_attr_temp2_input.dev_attr.attr,
+	&sensor_dev_attr_temp2_crit.dev_attr.attr,
 	&sensor_dev_attr_temp2_alarm.dev_attr.attr,
 	&sensor_dev_attr_temp2_fault.dev_attr.attr,
 	&sensor_dev_attr_pwm1.dev_attr.attr,
@@ -254,6 +271,7 @@ static struct attribute *temp3_attributes[] = {
 	&sensor_dev_attr_temp3_max.dev_attr.attr,
 	&sensor_dev_attr_temp3_min.dev_attr.attr,
 	&sensor_dev_attr_temp3_input.dev_attr.attr,
+	&sensor_dev_attr_temp3_crit.dev_attr.attr,
 	&sensor_dev_attr_temp3_alarm.dev_attr.attr,
 	&sensor_dev_attr_temp3_fault.dev_attr.attr,
 	NULL
@@ -429,6 +447,10 @@ static struct thmc50_data *thmc50_update_device(struct device *dev)
 
 		int temps = data->has_temp3 ? 3 : 2;
 		int i;
+		int prog = i2c_smbus_read_byte_data(client, THMC50_REG_CONF);
+
+		prog &= THMC50_REG_CONF_PROGRAMMED;
+
 		for (i = 0; i < temps; i++) {
 			data->temp_input[i] = i2c_smbus_read_byte_data(client,
 						THMC50_REG_TEMP[i]);
@@ -436,6 +458,10 @@ static struct thmc50_data *thmc50_update_device(struct device *dev)
 						THMC50_REG_TEMP_MAX[i]);
 			data->temp_min[i] = i2c_smbus_read_byte_data(client,
 						THMC50_REG_TEMP_MIN[i]);
+			data->temp_critical[i] =
+				i2c_smbus_read_byte_data(client,
+					prog ? THMC50_REG_TEMP_CRITICAL[i]
+					     : THMC50_REG_TEMP_DEFAULT[i]);
 		}
 		data->analog_out =
 		    i2c_smbus_read_byte_data(client, THMC50_REG_ANALOG_OUT);
diff --git a/drivers/hwmon/w83627hf.c b/drivers/hwmon/w83627hf.c
index 9564fb069957..b30e5796cb26 100644
--- a/drivers/hwmon/w83627hf.c
+++ b/drivers/hwmon/w83627hf.c
@@ -67,10 +67,6 @@ module_param(force_i2c, byte, 0);
 MODULE_PARM_DESC(force_i2c,
 		 "Initialize the i2c address of the sensors");
 
-static int reset;
-module_param(reset, bool, 0);
-MODULE_PARM_DESC(reset, "Set to one to reset chip on load");
-
 static int init = 1;
 module_param(init, bool, 0);
 MODULE_PARM_DESC(init, "Set to zero to bypass chip initialization");
@@ -209,6 +205,13 @@ static const u16 w83627hf_reg_temp_over[]	= { 0x39, 0x155, 0x255 };
 #define W83627HF_REG_PWM1 0x5A
 #define W83627HF_REG_PWM2 0x5B
 
+static const u8 W83627THF_REG_PWM_ENABLE[] = {
+	0x04,		/* FAN 1 mode */
+	0x04,		/* FAN 2 mode */
+	0x12,		/* FAN AUX mode */
+};
+static const u8 W83627THF_PWM_ENABLE_SHIFT[] = { 2, 4, 1 };
+
 #define W83627THF_REG_PWM1		0x01	/* 697HF/637HF/687THF too */
 #define W83627THF_REG_PWM2		0x03	/* 697HF/637HF/687THF too */
 #define W83627THF_REG_PWM3		0x11	/* 637HF/687THF too */
@@ -366,6 +369,9 @@ struct w83627hf_data {
 	u32 alarms;		/* Register encoding, combined */
 	u32 beep_mask;		/* Register encoding, combined */
 	u8 pwm[3];		/* Register value */
+	u8 pwm_enable[3];	/* 1 = manual
+				   2 = thermal cruise (also called SmartFan I)
+				   3 = fan speed cruise */
 	u8 pwm_freq[3];		/* Register value */
 	u16 sens[3];		/* 1 = pentium diode; 2 = 3904 diode;
 				   4 = thermistor */
@@ -957,6 +963,42 @@ static SENSOR_DEVICE_ATTR(pwm2, S_IRUGO|S_IWUSR, show_pwm, store_pwm, 1);
 static SENSOR_DEVICE_ATTR(pwm3, S_IRUGO|S_IWUSR, show_pwm, store_pwm, 2);
 
 static ssize_t
+show_pwm_enable(struct device *dev, struct device_attribute *devattr, char *buf)
+{
+	int nr = to_sensor_dev_attr(devattr)->index;
+	struct w83627hf_data *data = w83627hf_update_device(dev);
+	return sprintf(buf, "%d\n", data->pwm_enable[nr]);
+}
+
+static ssize_t
+store_pwm_enable(struct device *dev, struct device_attribute *devattr,
+	  const char *buf, size_t count)
+{
+	int nr = to_sensor_dev_attr(devattr)->index;
+	struct w83627hf_data *data = dev_get_drvdata(dev);
+	unsigned long val = simple_strtoul(buf, NULL, 10);
+	u8 reg;
+
+	if (!val || (val > 3))	/* modes 1, 2 and 3 are supported */
+		return -EINVAL;
+	mutex_lock(&data->update_lock);
+	data->pwm_enable[nr] = val;
+	reg = w83627hf_read_value(data, W83627THF_REG_PWM_ENABLE[nr]);
+	reg &= ~(0x03 << W83627THF_PWM_ENABLE_SHIFT[nr]);
+	reg |= (val - 1) << W83627THF_PWM_ENABLE_SHIFT[nr];
+	w83627hf_write_value(data, W83627THF_REG_PWM_ENABLE[nr], reg);
+	mutex_unlock(&data->update_lock);
+	return count;
+}
+
+static SENSOR_DEVICE_ATTR(pwm1_enable, S_IRUGO|S_IWUSR, show_pwm_enable,
+						  store_pwm_enable, 0);
+static SENSOR_DEVICE_ATTR(pwm2_enable, S_IRUGO|S_IWUSR, show_pwm_enable,
+						  store_pwm_enable, 1);
+static SENSOR_DEVICE_ATTR(pwm3_enable, S_IRUGO|S_IWUSR, show_pwm_enable,
+						  store_pwm_enable, 2);
+
+static ssize_t
 show_pwm_freq(struct device *dev, struct device_attribute *devattr, char *buf)
 {
 	int nr = to_sensor_dev_attr(devattr)->index;
@@ -1223,6 +1265,11 @@ static struct attribute *w83627hf_attributes_opt[] = {
 	&sensor_dev_attr_pwm1_freq.dev_attr.attr,
 	&sensor_dev_attr_pwm2_freq.dev_attr.attr,
 	&sensor_dev_attr_pwm3_freq.dev_attr.attr,
+
+	&sensor_dev_attr_pwm1_enable.dev_attr.attr,
+	&sensor_dev_attr_pwm2_enable.dev_attr.attr,
+	&sensor_dev_attr_pwm3_enable.dev_attr.attr,
+
 	NULL
 };
 
@@ -1366,6 +1413,19 @@ static int __devinit w83627hf_probe(struct platform_device *pdev)
 				&sensor_dev_attr_pwm3_freq.dev_attr)))
 			goto ERROR4;
 
+	if (data->type != w83627hf)
+		if ((err = device_create_file(dev,
+				&sensor_dev_attr_pwm1_enable.dev_attr))
+		 || (err = device_create_file(dev,
+				&sensor_dev_attr_pwm2_enable.dev_attr)))
+			goto ERROR4;
+
+	if (data->type == w83627thf || data->type == w83637hf
+	 || data->type == w83687thf)
+		if ((err = device_create_file(dev,
+				&sensor_dev_attr_pwm3_enable.dev_attr)))
+			goto ERROR4;
+
 	data->hwmon_dev = hwmon_device_register(dev);
 	if (IS_ERR(data->hwmon_dev)) {
 		err = PTR_ERR(data->hwmon_dev);
@@ -1536,29 +1596,6 @@ static void __devinit w83627hf_init_device(struct platform_device *pdev)
 	enum chips type = data->type;
 	u8 tmp;
 
-	if (reset) {
-		/* Resetting the chip has been the default for a long time,
-		   but repeatedly caused problems (fans going to full
-		   speed...) so it is now optional. It might even go away if
-		   nobody reports it as being useful, as I see very little
-		   reason why this would be needed at all. */
-		dev_info(&pdev->dev, "If reset=1 solved a problem you were "
-			 "having, please report!\n");
-
-		/* save this register */
-		i = w83627hf_read_value(data, W83781D_REG_BEEP_CONFIG);
-		/* Reset all except Watchdog values and last conversion values
-		   This sets fan-divs to 2, among others */
-		w83627hf_write_value(data, W83781D_REG_CONFIG, 0x80);
-		/* Restore the register and disable power-on abnormal beep.
-		   This saves FAN 1/2/3 input/output values set by BIOS. */
-		w83627hf_write_value(data, W83781D_REG_BEEP_CONFIG, i | 0x80);
-		/* Disable master beep-enable (reset turns it on).
-		   Individual beeps should be reset to off but for some reason
-		   disabling this bit helps some people not get beeped */
-		w83627hf_write_value(data, W83781D_REG_BEEP_INTS2, 0);
-	}
-
 	/* Minimize conflicts with other winbond i2c-only clients...  */
 	/* disable i2c subclients... how to disable main i2c client?? */
 	/* force i2c address to relatively uncommon address */
@@ -1655,6 +1692,7 @@ static struct w83627hf_data *w83627hf_update_device(struct device *dev)
 {
 	struct w83627hf_data *data = dev_get_drvdata(dev);
 	int i, num_temps = (data->type == w83697hf) ? 2 : 3;
+	int num_pwms = (data->type == w83697hf) ? 2 : 3;
 
 	mutex_lock(&data->update_lock);
 
@@ -1707,6 +1745,15 @@ static struct w83627hf_data *w83627hf_update_device(struct device *dev)
 					break;
 			}
 		}
+		if (data->type != w83627hf) {
+			for (i = 0; i < num_pwms; i++) {
+				u8 tmp = w83627hf_read_value(data,
+					W83627THF_REG_PWM_ENABLE[i]);
+				data->pwm_enable[i] =
+					((tmp >> W83627THF_PWM_ENABLE_SHIFT[i])
+					& 0x03) + 1;
+			}
+		}
 		for (i = 0; i < num_temps; i++) {
 			data->temp[i] = w83627hf_read_value(
 						data, w83627hf_reg_temp[i]);
diff --git a/drivers/hwmon/w83791d.c b/drivers/hwmon/w83791d.c
index e4e91c9d480a..de21142d106c 100644
--- a/drivers/hwmon/w83791d.c
+++ b/drivers/hwmon/w83791d.c
@@ -233,11 +233,9 @@ static u8 fan_to_reg(long rpm, int div)
 static u8 div_to_reg(int nr, long val)
 {
 	int i;
-	int max;
 
-	/* first three fan's divisor max out at 8, rest max out at 128 */
-	max = (nr < 3) ? 8 : 128;
-	val = SENSORS_LIMIT(val, 1, max) >> 1;
+	/* fan divisors max out at 128 */
+	val = SENSORS_LIMIT(val, 1, 128) >> 1;
 	for (i = 0; i < 7; i++) {
 		if (val == 0)
 			break;
@@ -530,6 +528,7 @@ static ssize_t store_fan_div(struct device *dev, struct device_attribute *attr,
 	unsigned long min;
 	u8 tmp_fan_div;
 	u8 fan_div_reg;
+	u8 vbat_reg;
 	int indx = 0;
 	u8 keep_mask = 0;
 	u8 new_shift = 0;
@@ -581,6 +580,16 @@ static ssize_t store_fan_div(struct device *dev, struct device_attribute *attr,
 	w83791d_write(client, W83791D_REG_FAN_DIV[indx],
 				fan_div_reg | tmp_fan_div);
 
+	/* Bit 2 of fans 0-2 is stored in the vbat register (bits 5-7) */
+	if (nr < 3) {
+		keep_mask = ~(1 << (nr + 5));
+		vbat_reg = w83791d_read(client, W83791D_REG_VBAT)
+				& keep_mask;
+		tmp_fan_div = (data->fan_div[nr] << (3 + nr)) & ~keep_mask;
+		w83791d_write(client, W83791D_REG_VBAT,
+				vbat_reg | tmp_fan_div);
+	}
+
 	/* Restore fan_min */
 	data->fan_min[nr] = fan_to_reg(min, DIV_FROM_REG(data->fan_div[nr]));
 	w83791d_write(client, W83791D_REG_FAN_MIN[nr], data->fan_min[nr]);
@@ -1046,9 +1055,10 @@ static int w83791d_probe(struct i2c_client *client,
 {
 	struct w83791d_data *data;
 	struct device *dev = &client->dev;
-	int i, val1, err;
+	int i, err;
 
 #ifdef DEBUG
+	int val1;
 	val1 = w83791d_read(client, W83791D_REG_DID_VID4);
 	dev_dbg(dev, "Device ID version: %d.%d (0x%02x)\n",
 			(val1 >> 5) & 0x07, (val1 >> 1) & 0x0f, val1);
@@ -1182,6 +1192,7 @@ static struct w83791d_data *w83791d_update_device(struct device *dev)
 	struct w83791d_data *data = i2c_get_clientdata(client);
 	int i, j;
 	u8 reg_array_tmp[3];
+	u8 vbat_reg;
 
 	mutex_lock(&data->update_lock);
 
@@ -1219,6 +1230,12 @@ static struct w83791d_data *w83791d_update_device(struct device *dev)
 		data->fan_div[3] = reg_array_tmp[2] & 0x07;
 		data->fan_div[4] = (reg_array_tmp[2] >> 4) & 0x07;
 
+		/* The fan divisor for fans 0-2 get bit 2 from
+		   bits 5-7 respectively of vbat register */
+		vbat_reg = w83791d_read(client, W83791D_REG_VBAT);
+		for (i = 0; i < 3; i++)
+			data->fan_div[i] |= (vbat_reg >> (3 + i)) & 0x04;
+
 		/* Update the first temperature sensor */
 		for (i = 0; i < 3; i++) {
 			data->temp1[i] = w83791d_read(client,
diff --git a/drivers/i2c/Kconfig b/drivers/i2c/Kconfig
index 96867347bcbf..711ca08ab776 100644
--- a/drivers/i2c/Kconfig
+++ b/drivers/i2c/Kconfig
@@ -38,6 +38,20 @@ config I2C_CHARDEV
 	  This support is also available as a module.  If so, the module 
 	  will be called i2c-dev.
 
+config I2C_HELPER_AUTO
+	bool "Autoselect pertinent helper modules"
+	default y
+	help
+	  Some I2C bus drivers require so-called "I2C algorithm" modules
+	  to work. These are basically software-only abstractions of generic
+	  I2C interfaces. This option will autoselect them so that you don't
+	  have to care.
+
+	  Unselect this only if you need to enable additional helper
+	  modules, for example for use with external I2C bus drivers.
+
+	  In doubt, say Y.
+
 source drivers/i2c/algos/Kconfig
 source drivers/i2c/busses/Kconfig
 source drivers/i2c/chips/Kconfig
diff --git a/drivers/i2c/algos/Kconfig b/drivers/i2c/algos/Kconfig
index 7137a17402fe..b788579b8227 100644
--- a/drivers/i2c/algos/Kconfig
+++ b/drivers/i2c/algos/Kconfig
@@ -2,15 +2,20 @@
 # I2C algorithm drivers configuration
 #
 
+menu "I2C Algorithms"
+	depends on !I2C_HELPER_AUTO
+
 config I2C_ALGOBIT
-	tristate
+	tristate "I2C bit-banging interfaces"
 
 config I2C_ALGOPCF
-	tristate
+	tristate "I2C PCF 8584 interfaces"
 
 config I2C_ALGOPCA
-	tristate
+	tristate "I2C PCA 9564 interfaces"
 
 config I2C_ALGO_SGI
 	tristate
 	depends on SGI_IP22 || SGI_IP32 || X86_VISWS
+
+endmenu
diff --git a/drivers/i2c/busses/i2c-acorn.c b/drivers/i2c/busses/i2c-acorn.c
index 7c2be3558a24..75089febbc13 100644
--- a/drivers/i2c/busses/i2c-acorn.c
+++ b/drivers/i2c/busses/i2c-acorn.c
@@ -16,7 +16,7 @@
 #include <linux/i2c.h>
 #include <linux/i2c-algo-bit.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 #include <asm/hardware/ioc.h>
 #include <asm/system.h>
diff --git a/drivers/i2c/busses/i2c-amd756-s4882.c b/drivers/i2c/busses/i2c-amd756-s4882.c
index 72872d1e63ef..8ba2bcf727d3 100644
--- a/drivers/i2c/busses/i2c-amd756-s4882.c
+++ b/drivers/i2c/busses/i2c-amd756-s4882.c
@@ -155,6 +155,9 @@ static int __init amd756_s4882_init(void)
 	int i, error;
 	union i2c_smbus_data ioconfig;
 
+	if (!amd756_smbus.dev.parent)
+		return -ENODEV;
+
 	/* Configure the PCA9556 multiplexer */
 	ioconfig.byte = 0x00; /* All I/O to output mode */
 	error = i2c_smbus_xfer(&amd756_smbus, 0x18, 0, I2C_SMBUS_WRITE, 0x03,
@@ -168,11 +171,7 @@ static int __init amd756_s4882_init(void)
 	/* Unregister physical bus */
 	error = i2c_del_adapter(&amd756_smbus);
 	if (error) {
-		if (error == -EINVAL)
-			error = -ENODEV;
-		else
-			dev_err(&amd756_smbus.dev, "Physical bus removal "
-				"failed\n");
+		dev_err(&amd756_smbus.dev, "Physical bus removal failed\n");
 		goto ERROR0;
 	}
 
diff --git a/drivers/i2c/busses/i2c-at91.c b/drivers/i2c/busses/i2c-at91.c
index 73d61946a534..9efb02137254 100644
--- a/drivers/i2c/busses/i2c-at91.c
+++ b/drivers/i2c/busses/i2c-at91.c
@@ -14,7 +14,6 @@
 */
 
 #include <linux/module.h>
-#include <linux/version.h>
 #include <linux/kernel.h>
 #include <linux/err.h>
 #include <linux/slab.h>
@@ -27,9 +26,9 @@
 
 #include <asm/io.h>
 
-#include <asm/arch/at91_twi.h>
-#include <asm/arch/board.h>
-#include <asm/arch/cpu.h>
+#include <mach/at91_twi.h>
+#include <mach/board.h>
+#include <mach/cpu.h>
 
 #define TWI_CLOCK		100000		/* Hz. max 400 Kbits/sec */
 
diff --git a/drivers/i2c/busses/i2c-bfin-twi.c b/drivers/i2c/busses/i2c-bfin-twi.c
index 48d084bdf7c8..3c855ff2992f 100644
--- a/drivers/i2c/busses/i2c-bfin-twi.c
+++ b/drivers/i2c/busses/i2c-bfin-twi.c
@@ -49,6 +49,8 @@ struct bfin_twi_iface {
 	struct i2c_msg 		*pmsg;
 	int			msg_num;
 	int			cur_msg;
+	u16			saved_clkdiv;
+	u16			saved_control;
 	void __iomem		*regs_base;
 };
 
@@ -565,32 +567,43 @@ static u32 bfin_twi_functionality(struct i2c_adapter *adap)
 	       I2C_FUNC_I2C;
 }
 
-
 static struct i2c_algorithm bfin_twi_algorithm = {
 	.master_xfer   = bfin_twi_master_xfer,
 	.smbus_xfer    = bfin_twi_smbus_xfer,
 	.functionality = bfin_twi_functionality,
 };
 
-
-static int i2c_bfin_twi_suspend(struct platform_device *dev, pm_message_t state)
+static int i2c_bfin_twi_suspend(struct platform_device *pdev, pm_message_t state)
 {
-	struct bfin_twi_iface *iface = platform_get_drvdata(dev);
+	struct bfin_twi_iface *iface = platform_get_drvdata(pdev);
+
+	iface->saved_clkdiv = read_CLKDIV(iface);
+	iface->saved_control = read_CONTROL(iface);
+
+	free_irq(iface->irq, iface);
 
 	/* Disable TWI */
-	write_CONTROL(iface, read_CONTROL(iface) & ~TWI_ENA);
-	SSYNC();
+	write_CONTROL(iface, iface->saved_control & ~TWI_ENA);
 
 	return 0;
 }
 
-static int i2c_bfin_twi_resume(struct platform_device *dev)
+static int i2c_bfin_twi_resume(struct platform_device *pdev)
 {
-	struct bfin_twi_iface *iface = platform_get_drvdata(dev);
+	struct bfin_twi_iface *iface = platform_get_drvdata(pdev);
 
-	/* Enable TWI */
-	write_CONTROL(iface, read_CONTROL(iface) | TWI_ENA);
-	SSYNC();
+	int rc = request_irq(iface->irq, bfin_twi_interrupt_entry,
+		IRQF_DISABLED, pdev->name, iface);
+	if (rc) {
+		dev_err(&pdev->dev, "Can't get IRQ %d !\n", iface->irq);
+		return -ENODEV;
+	}
+
+	/* Resume TWI interface clock as specified */
+	write_CLKDIV(iface, iface->saved_clkdiv);
+
+	/* Resume TWI */
+	write_CONTROL(iface, iface->saved_control);
 
 	return 0;
 }
diff --git a/drivers/i2c/busses/i2c-davinci.c b/drivers/i2c/busses/i2c-davinci.c
index af3846eda985..5d7789834b95 100644
--- a/drivers/i2c/busses/i2c-davinci.c
+++ b/drivers/i2c/busses/i2c-davinci.c
@@ -36,10 +36,9 @@
 #include <linux/platform_device.h>
 #include <linux/io.h>
 
-#include <asm/hardware.h>
-#include <asm/mach-types.h>
+#include <mach/hardware.h>
 
-#include <asm/arch/i2c.h>
+#include <mach/i2c.h>
 
 /* ----- global defines ----------------------------------------------- */
 
diff --git a/drivers/i2c/busses/i2c-gpio.c b/drivers/i2c/busses/i2c-gpio.c
index 79b455a1f090..32104eac8d3d 100644
--- a/drivers/i2c/busses/i2c-gpio.c
+++ b/drivers/i2c/busses/i2c-gpio.c
@@ -77,7 +77,7 @@ static int i2c_gpio_getscl(void *data)
 	return gpio_get_value(pdata->scl_pin);
 }
 
-static int __init i2c_gpio_probe(struct platform_device *pdev)
+static int __devinit i2c_gpio_probe(struct platform_device *pdev)
 {
 	struct i2c_gpio_platform_data *pdata;
 	struct i2c_algo_bit_data *bit_data;
@@ -174,7 +174,7 @@ err_alloc_adap:
 	return ret;
 }
 
-static int __exit i2c_gpio_remove(struct platform_device *pdev)
+static int __devexit i2c_gpio_remove(struct platform_device *pdev)
 {
 	struct i2c_gpio_platform_data *pdata;
 	struct i2c_adapter *adap;
@@ -196,14 +196,15 @@ static struct platform_driver i2c_gpio_driver = {
 		.name	= "i2c-gpio",
 		.owner	= THIS_MODULE,
 	},
-	.remove		= __exit_p(i2c_gpio_remove),
+	.probe		= i2c_gpio_probe,
+	.remove		= __devexit_p(i2c_gpio_remove),
 };
 
 static int __init i2c_gpio_init(void)
 {
 	int ret;
 
-	ret = platform_driver_probe(&i2c_gpio_driver, i2c_gpio_probe);
+	ret = platform_driver_register(&i2c_gpio_driver);
 	if (ret)
 		printk(KERN_ERR "i2c-gpio: probe failed: %d\n", ret);
 
diff --git a/drivers/i2c/busses/i2c-ixp2000.c b/drivers/i2c/busses/i2c-ixp2000.c
index 5af9e6521e6c..05d72e981353 100644
--- a/drivers/i2c/busses/i2c-ixp2000.c
+++ b/drivers/i2c/busses/i2c-ixp2000.c
@@ -33,8 +33,8 @@
 #include <linux/i2c.h>
 #include <linux/i2c-algo-bit.h>
 
-#include <asm/hardware.h>	/* Pick up IXP2000-specific bits */
-#include <asm/arch/gpio.h>
+#include <mach/hardware.h>	/* Pick up IXP2000-specific bits */
+#include <mach/gpio.h>
 
 static inline int ixp2000_scl_pin(void *data)
 {
diff --git a/drivers/i2c/busses/i2c-nforce2-s4985.c b/drivers/i2c/busses/i2c-nforce2-s4985.c
index d1a4cbcf2aa4..29015eb9ca46 100644
--- a/drivers/i2c/busses/i2c-nforce2-s4985.c
+++ b/drivers/i2c/busses/i2c-nforce2-s4985.c
@@ -150,6 +150,9 @@ static int __init nforce2_s4985_init(void)
 	int i, error;
 	union i2c_smbus_data ioconfig;
 
+	if (!nforce2_smbus)
+		return -ENODEV;
+
 	/* Configure the PCA9556 multiplexer */
 	ioconfig.byte = 0x00; /* All I/O to output mode */
 	error = i2c_smbus_xfer(nforce2_smbus, 0x18, 0, I2C_SMBUS_WRITE, 0x03,
@@ -161,8 +164,6 @@ static int __init nforce2_s4985_init(void)
 	}
 
 	/* Unregister physical bus */
-	if (!nforce2_smbus)
-		return -ENODEV;
 	error = i2c_del_adapter(nforce2_smbus);
 	if (error) {
 		dev_err(&nforce2_smbus->dev, "Physical bus removal failed\n");
diff --git a/drivers/i2c/busses/i2c-pnx.c b/drivers/i2c/busses/i2c-pnx.c
index 1ca21084ffcf..ec15cff556b9 100644
--- a/drivers/i2c/busses/i2c-pnx.c
+++ b/drivers/i2c/busses/i2c-pnx.c
@@ -19,7 +19,7 @@
 #include <linux/completion.h>
 #include <linux/platform_device.h>
 #include <linux/i2c-pnx.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/irq.h>
 #include <asm/uaccess.h>
 
diff --git a/drivers/i2c/busses/i2c-pxa.c b/drivers/i2c/busses/i2c-pxa.c
index af9e6034d7fb..44d838410f15 100644
--- a/drivers/i2c/busses/i2c-pxa.c
+++ b/drivers/i2c/busses/i2c-pxa.c
@@ -34,11 +34,11 @@
 #include <linux/err.h>
 #include <linux/clk.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/irq.h>
 #include <asm/io.h>
-#include <asm/arch/i2c.h>
-#include <asm/arch/pxa-regs.h>
+#include <mach/i2c.h>
+#include <mach/pxa-regs.h>
 
 struct pxa_i2c {
 	spinlock_t		lock;
diff --git a/drivers/i2c/busses/i2c-s3c2410.c b/drivers/i2c/busses/i2c-s3c2410.c
index 007390ad9810..c772e02c2803 100644
--- a/drivers/i2c/busses/i2c-s3c2410.c
+++ b/drivers/i2c/busses/i2c-s3c2410.c
@@ -33,12 +33,13 @@
 #include <linux/err.h>
 #include <linux/platform_device.h>
 #include <linux/clk.h>
+#include <linux/cpufreq.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/irq.h>
 #include <asm/io.h>
 
-#include <asm/arch/regs-gpio.h>
+#include <mach/regs-gpio.h>
 #include <asm/plat-s3c/regs-iic.h>
 #include <asm/plat-s3c/iic.h>
 
@@ -64,6 +65,7 @@ struct s3c24xx_i2c {
 	unsigned int		tx_setup;
 
 	enum s3c24xx_i2c_state	state;
+	unsigned long		clkrate;
 
 	void __iomem		*regs;
 	struct clk		*clk;
@@ -71,6 +73,10 @@ struct s3c24xx_i2c {
 	struct resource		*irq;
 	struct resource		*ioarea;
 	struct i2c_adapter	adap;
+
+#ifdef CONFIG_CPU_FREQ
+	struct notifier_block	freq_transition;
+#endif
 };
 
 /* default platform data to use if not supplied in the platform_device
@@ -501,6 +507,9 @@ static int s3c24xx_i2c_doxfer(struct s3c24xx_i2c *i2c, struct i2c_msg *msgs, int
 	unsigned long timeout;
 	int ret;
 
+	if (!readl(i2c->regs + S3C2410_IICCON) & S3C2410_IICCON_IRQEN)
+		return -EIO;
+
 	ret = s3c24xx_i2c_set_master(i2c);
 	if (ret != 0) {
 		dev_err(i2c->dev, "cannot get bus (error %d)\n", ret);
@@ -636,27 +645,28 @@ static inline int freq_acceptable(unsigned int freq, unsigned int wanted)
 	return (diff >= -2 && diff <= 2);
 }
 
-/* s3c24xx_i2c_getdivisor
+/* s3c24xx_i2c_clockrate
  *
  * work out a divisor for the user requested frequency setting,
  * either by the requested frequency, or scanning the acceptable
  * range of frequencies until something is found
 */
 
-static int s3c24xx_i2c_getdivisor(struct s3c24xx_i2c *i2c,
-				  struct s3c2410_platform_i2c *pdata,
-				  unsigned long *iicon,
-				  unsigned int *got)
+static int s3c24xx_i2c_clockrate(struct s3c24xx_i2c *i2c, unsigned int *got)
 {
+	struct s3c2410_platform_i2c *pdata;
 	unsigned long clkin = clk_get_rate(i2c->clk);
-	
 	unsigned int divs, div1;
+	u32 iiccon;
 	int freq;
 	int start, end;
 
+	i2c->clkrate = clkin;
+
+	pdata = s3c24xx_i2c_get_platformdata(i2c->adap.dev.parent);
 	clkin /= 1000;		/* clkin now in KHz */
      
-	dev_dbg(i2c->dev,  "pdata %p, freq %lu %lu..%lu\n",
+	dev_dbg(i2c->dev, "pdata %p, freq %lu %lu..%lu\n",
 		 pdata, pdata->bus_freq, pdata->min_freq, pdata->max_freq);
 
 	if (pdata->bus_freq != 0) {
@@ -688,11 +698,79 @@ static int s3c24xx_i2c_getdivisor(struct s3c24xx_i2c *i2c,
 
  found:
 	*got = freq;
-	*iicon |= (divs-1);
-	*iicon |= (div1 == 512) ? S3C2410_IICCON_TXDIV_512 : 0;
+
+	iiccon = readl(i2c->regs + S3C2410_IICCON);
+	iiccon &= ~(S3C2410_IICCON_SCALEMASK | S3C2410_IICCON_TXDIV_512);
+	iiccon |= (divs-1);
+
+	if (div1 == 512)
+		iiccon |= S3C2410_IICCON_TXDIV_512;
+
+	writel(iiccon, i2c->regs + S3C2410_IICCON);
+
+	return 0;
+}
+
+#ifdef CONFIG_CPU_FREQ
+
+#define freq_to_i2c(_n) container_of(_n, struct s3c24xx_i2c, freq_transition)
+
+static int s3c24xx_i2c_cpufreq_transition(struct notifier_block *nb,
+					  unsigned long val, void *data)
+{
+	struct s3c24xx_i2c *i2c = freq_to_i2c(nb);
+	unsigned long flags;
+	unsigned int got;
+	int delta_f;
+	int ret;
+
+	delta_f = clk_get_rate(i2c->clk) - i2c->clkrate;
+
+	/* if we're post-change and the input clock has slowed down
+	 * or at pre-change and the clock is about to speed up, then
+	 * adjust our clock rate. <0 is slow, >0 speedup.
+	 */
+
+	if ((val == CPUFREQ_POSTCHANGE && delta_f < 0) ||
+	    (val == CPUFREQ_PRECHANGE && delta_f > 0)) {
+		spin_lock_irqsave(&i2c->lock, flags);
+		ret = s3c24xx_i2c_clockrate(i2c, &got);
+		spin_unlock_irqrestore(&i2c->lock, flags);
+
+		if (ret < 0)
+			dev_err(i2c->dev, "cannot find frequency\n");
+		else
+			dev_info(i2c->dev, "setting freq %d\n", got);
+	}
+
+	return 0;
+}
+
+static inline int s3c24xx_i2c_register_cpufreq(struct s3c24xx_i2c *i2c)
+{
+	i2c->freq_transition.notifier_call = s3c24xx_i2c_cpufreq_transition;
+
+	return cpufreq_register_notifier(&i2c->freq_transition,
+					 CPUFREQ_TRANSITION_NOTIFIER);
+}
+
+static inline void s3c24xx_i2c_deregister_cpufreq(struct s3c24xx_i2c *i2c)
+{
+	cpufreq_unregister_notifier(&i2c->freq_transition,
+				    CPUFREQ_TRANSITION_NOTIFIER);
+}
+
+#else
+static inline int s3c24xx_i2c_register_cpufreq(struct s3c24xx_i2c *i2c)
+{
 	return 0;
 }
 
+static inline void s3c24xx_i2c_deregister_cpufreq(struct s3c24xx_i2c *i2c)
+{
+}
+#endif
+
 /* s3c24xx_i2c_init
  *
  * initialise the controller, set the IO lines and frequency 
@@ -719,9 +797,12 @@ static int s3c24xx_i2c_init(struct s3c24xx_i2c *i2c)
 
 	dev_info(i2c->dev, "slave address 0x%02x\n", pdata->slave_addr);
 
+	writel(iicon, i2c->regs + S3C2410_IICCON);
+
 	/* we need to work out the divisors for the clock... */
 
-	if (s3c24xx_i2c_getdivisor(i2c, pdata, &iicon, &freq) != 0) {
+	if (s3c24xx_i2c_clockrate(i2c, &freq) != 0) {
+		writel(0, i2c->regs + S3C2410_IICCON);
 		dev_err(i2c->dev, "cannot meet bus frequency required\n");
 		return -EINVAL;
 	}
@@ -730,8 +811,6 @@ static int s3c24xx_i2c_init(struct s3c24xx_i2c *i2c)
 
 	dev_info(i2c->dev, "bus frequency set to %d KHz\n", freq);
 	dev_dbg(i2c->dev, "S3C2410_IICCON=0x%02lx\n", iicon);
-	
-	writel(iicon, i2c->regs + S3C2410_IICCON);
 
 	/* check for s3c2440 i2c controller  */
 
@@ -752,9 +831,12 @@ static int s3c24xx_i2c_init(struct s3c24xx_i2c *i2c)
 static int s3c24xx_i2c_probe(struct platform_device *pdev)
 {
 	struct s3c24xx_i2c *i2c = &s3c24xx_i2c;
+	struct s3c2410_platform_i2c *pdata;
 	struct resource *res;
 	int ret;
 
+	pdata = s3c24xx_i2c_get_platformdata(&pdev->dev);
+
 	/* find the clock and enable it */
 
 	i2c->dev = &pdev->dev;
@@ -832,17 +914,34 @@ static int s3c24xx_i2c_probe(struct platform_device *pdev)
 	dev_dbg(&pdev->dev, "irq resource %p (%lu)\n", res,
 		(unsigned long)res->start);
 
-	ret = i2c_add_adapter(&i2c->adap);
+	ret = s3c24xx_i2c_register_cpufreq(i2c);
 	if (ret < 0) {
-		dev_err(&pdev->dev, "failed to add bus to i2c core\n");
+		dev_err(&pdev->dev, "failed to register cpufreq notifier\n");
 		goto err_irq;
 	}
 
+	/* Note, previous versions of the driver used i2c_add_adapter()
+	 * to add the bus at any number. We now pass the bus number via
+	 * the platform data, so if unset it will now default to always
+	 * being bus 0.
+	 */
+
+	i2c->adap.nr = pdata->bus_num;
+
+	ret = i2c_add_numbered_adapter(&i2c->adap);
+	if (ret < 0) {
+		dev_err(&pdev->dev, "failed to add bus to i2c core\n");
+		goto err_cpufreq;
+	}
+
 	platform_set_drvdata(pdev, i2c);
 
 	dev_info(&pdev->dev, "%s: S3C I2C adapter\n", i2c->adap.dev.bus_id);
 	return 0;
 
+ err_cpufreq:
+	s3c24xx_i2c_deregister_cpufreq(i2c);
+
  err_irq:
 	free_irq(i2c->irq->start, i2c);
 
@@ -870,6 +969,8 @@ static int s3c24xx_i2c_remove(struct platform_device *pdev)
 {
 	struct s3c24xx_i2c *i2c = platform_get_drvdata(pdev);
 
+	s3c24xx_i2c_deregister_cpufreq(i2c);
+
 	i2c_del_adapter(&i2c->adap);
 	free_irq(i2c->irq->start, i2c);
 
diff --git a/drivers/i2c/chips/Kconfig b/drivers/i2c/chips/Kconfig
index 50e0a4653741..a95cb9465d65 100644
--- a/drivers/i2c/chips/Kconfig
+++ b/drivers/i2c/chips/Kconfig
@@ -126,7 +126,7 @@ config ISP1301_OMAP
 
 config TPS65010
 	tristate "TPS6501x Power Management chips"
-	depends on HAVE_GPIO_LIB
+	depends on GPIOLIB
 	default y if MACH_OMAP_H2 || MACH_OMAP_H3 || MACH_OMAP_OSK
 	help
 	  If you say yes here you get support for the TPS6501x series of
diff --git a/drivers/i2c/chips/at24.c b/drivers/i2c/chips/at24.c
index e764c94f3e3d..2a4acb269569 100644
--- a/drivers/i2c/chips/at24.c
+++ b/drivers/i2c/chips/at24.c
@@ -188,7 +188,7 @@ static ssize_t at24_eeprom_read(struct at24_data *at24, char *buf,
 			count = I2C_SMBUS_BLOCK_MAX;
 		status = i2c_smbus_read_i2c_block_data(client, offset,
 				count, buf);
-		dev_dbg(&client->dev, "smbus read %zd@%d --> %d\n",
+		dev_dbg(&client->dev, "smbus read %zu@%d --> %d\n",
 				count, offset, status);
 		return (status < 0) ? -EIO : status;
 	}
@@ -214,7 +214,7 @@ static ssize_t at24_eeprom_read(struct at24_data *at24, char *buf,
 	msg[1].len = count;
 
 	status = i2c_transfer(client->adapter, msg, 2);
-	dev_dbg(&client->dev, "i2c read %zd@%d --> %d\n",
+	dev_dbg(&client->dev, "i2c read %zu@%d --> %d\n",
 			count, offset, status);
 
 	if (status == 2)
@@ -334,7 +334,7 @@ static ssize_t at24_eeprom_write(struct at24_data *at24, char *buf,
 			if (status == 1)
 				status = count;
 		}
-		dev_dbg(&client->dev, "write %zd@%d --> %zd (%ld)\n",
+		dev_dbg(&client->dev, "write %zu@%d --> %zd (%ld)\n",
 				count, offset, status, jiffies);
 
 		if (status == count)
@@ -512,7 +512,7 @@ static int at24_probe(struct i2c_client *client, const struct i2c_device_id *id)
 
 	i2c_set_clientdata(client, at24);
 
-	dev_info(&client->dev, "%Zd byte %s EEPROM %s\n",
+	dev_info(&client->dev, "%zu byte %s EEPROM %s\n",
 		at24->bin.size, client->name,
 		writable ? "(writable)" : "(read-only)");
 	dev_dbg(&client->dev,
diff --git a/drivers/i2c/chips/isp1301_omap.c b/drivers/i2c/chips/isp1301_omap.c
index 03a33f1b9cd3..4655b794ebe3 100644
--- a/drivers/i2c/chips/isp1301_omap.c
+++ b/drivers/i2c/chips/isp1301_omap.c
@@ -33,7 +33,7 @@
 #include <linux/workqueue.h>
 
 #include <asm/irq.h>
-#include <asm/arch/usb.h>
+#include <mach/usb.h>
 
 
 #ifndef	DEBUG
@@ -94,7 +94,7 @@ struct isp1301 {
 /* board-specific PM hooks */
 
 #include <asm/gpio.h>
-#include <asm/arch/mux.h>
+#include <mach/mux.h>
 #include <asm/mach-types.h>
 
 
@@ -1593,7 +1593,7 @@ fail1:
 	if (machine_is_omap_h2()) {
 		/* full speed signaling by default */
 		isp1301_set_bits(isp, ISP1301_MODE_CONTROL_1,
-			MC1_SPEED_REG);
+			MC1_SPEED);
 		isp1301_set_bits(isp, ISP1301_MODE_CONTROL_2,
 			MC2_SPD_SUSP_CTRL);
 
diff --git a/drivers/i2c/chips/menelaus.c b/drivers/i2c/chips/menelaus.c
index b36db1797c11..176126d3a01d 100644
--- a/drivers/i2c/chips/menelaus.c
+++ b/drivers/i2c/chips/menelaus.c
@@ -41,11 +41,10 @@
 #include <linux/rtc.h>
 #include <linux/bcd.h>
 
-#include <asm/mach-types.h>
 #include <asm/mach/irq.h>
 
-#include <asm/arch/gpio.h>
-#include <asm/arch/menelaus.h>
+#include <mach/gpio.h>
+#include <mach/menelaus.h>
 
 #define DRIVER_NAME			"menelaus"
 
diff --git a/drivers/i2c/chips/tps65010.c b/drivers/i2c/chips/tps65010.c
index 85949685191b..cf02e8fceb42 100644
--- a/drivers/i2c/chips/tps65010.c
+++ b/drivers/i2c/chips/tps65010.c
@@ -636,6 +636,8 @@ static int tps65010_probe(struct i2c_client *client,
 		tps->outmask = board->outmask;
 
 		tps->chip.label = client->name;
+		tps->chip.dev = &client->dev;
+		tps->chip.owner = THIS_MODULE;
 
 		tps->chip.set = tps65010_gpio_set;
 		tps->chip.direction_output = tps65010_output;
diff --git a/drivers/i2c/i2c-core.c b/drivers/i2c/i2c-core.c
index 7bf38c418086..b346a687ab59 100644
--- a/drivers/i2c/i2c-core.c
+++ b/drivers/i2c/i2c-core.c
@@ -108,6 +108,9 @@ static int i2c_device_probe(struct device *dev)
 	if (!driver->probe || !driver->id_table)
 		return -ENODEV;
 	client->driver = driver;
+	if (!device_can_wakeup(&client->dev))
+		device_init_wakeup(&client->dev,
+					client->flags & I2C_CLIENT_WAKE);
 	dev_dbg(dev, "probe\n");
 
 	status = driver->probe(client, i2c_match_id(driver->id_table, client));
@@ -262,9 +265,8 @@ i2c_new_device(struct i2c_adapter *adap, struct i2c_board_info const *info)
 	client->adapter = adap;
 
 	client->dev.platform_data = info->platform_data;
-	device_init_wakeup(&client->dev, info->flags & I2C_CLIENT_WAKE);
 
-	client->flags = info->flags & ~I2C_CLIENT_WAKE;
+	client->flags = info->flags;
 	client->addr = info->addr;
 	client->irq = info->irq;
 
@@ -813,7 +815,12 @@ static int i2c_check_addr(struct i2c_adapter *adapter, int addr)
 int i2c_attach_client(struct i2c_client *client)
 {
 	struct i2c_adapter *adapter = client->adapter;
-	int res = 0;
+	int res;
+
+	/* Check for address business */
+	res = i2c_check_addr(adapter, client->addr);
+	if (res)
+		return res;
 
 	client->dev.parent = &client->adapter->dev;
 	client->dev.bus = &i2c_bus_type;
@@ -1183,8 +1190,8 @@ int i2c_probe(struct i2c_adapter *adapter,
 		 && address_data->normal_i2c[0] == I2C_CLIENT_END)
 			return 0;
 
-		dev_warn(&adapter->dev, "SMBus Quick command not supported, "
-			 "can't probe for chips\n");
+		dev_dbg(&adapter->dev, "SMBus Quick command not supported, "
+			"can't probe for chips\n");
 		return -EOPNOTSUPP;
 	}
 
@@ -1345,6 +1352,10 @@ static int i2c_detect(struct i2c_adapter *adapter, struct i2c_driver *driver)
 		}
 	}
 
+	/* Stop here if the classes do not match */
+	if (!(adapter->class & driver->class))
+		goto exit_free;
+
 	/* Stop here if we can't use SMBUS_QUICK */
 	if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_QUICK)) {
 		if (address_data->probe[0] == I2C_CLIENT_END
@@ -1357,10 +1368,6 @@ static int i2c_detect(struct i2c_adapter *adapter, struct i2c_driver *driver)
 		goto exit_free;
 	}
 
-	/* Stop here if the classes do not match */
-	if (!(adapter->class & driver->class))
-		goto exit_free;
-
 	/* Probe entries are done second, and are not affected by ignore
 	   entries either */
 	for (i = 0; address_data->probe[i] != I2C_CLIENT_END; i += 2) {
@@ -1451,9 +1458,11 @@ i2c_new_probed_device(struct i2c_adapter *adap,
 		if ((addr_list[i] & ~0x07) == 0x30
 		 || (addr_list[i] & ~0x0f) == 0x50
 		 || !i2c_check_functionality(adap, I2C_FUNC_SMBUS_QUICK)) {
+			union i2c_smbus_data data;
+
 			if (i2c_smbus_xfer(adap, addr_list[i], 0,
 					   I2C_SMBUS_READ, 0,
-					   I2C_SMBUS_BYTE, NULL) >= 0)
+					   I2C_SMBUS_BYTE, &data) >= 0)
 				break;
 		} else {
 			if (i2c_smbus_xfer(adap, addr_list[i], 0,
diff --git a/drivers/i2c/i2c-dev.c b/drivers/i2c/i2c-dev.c
index 9d55c6383b23..af4491fa7e34 100644
--- a/drivers/i2c/i2c-dev.c
+++ b/drivers/i2c/i2c-dev.c
@@ -147,7 +147,7 @@ static ssize_t i2cdev_read (struct file *file, char __user *buf, size_t count,
 	if (tmp==NULL)
 		return -ENOMEM;
 
-	pr_debug("i2c-dev: i2c-%d reading %zd bytes.\n",
+	pr_debug("i2c-dev: i2c-%d reading %zu bytes.\n",
 		iminor(file->f_path.dentry->d_inode), count);
 
 	ret = i2c_master_recv(client,tmp,count);
@@ -175,7 +175,7 @@ static ssize_t i2cdev_write (struct file *file, const char __user *buf, size_t c
 		return -EFAULT;
 	}
 
-	pr_debug("i2c-dev: i2c-%d writing %zd bytes.\n",
+	pr_debug("i2c-dev: i2c-%d writing %zu bytes.\n",
 		iminor(file->f_path.dentry->d_inode), count);
 
 	ret = i2c_master_send(client,tmp,count);
diff --git a/drivers/ide/Kconfig b/drivers/ide/Kconfig
index 130ef64b44f7..fc735ab08ff4 100644
--- a/drivers/ide/Kconfig
+++ b/drivers/ide/Kconfig
@@ -54,16 +54,6 @@ menuconfig IDE
 
 if IDE
 
-config IDE_MAX_HWIFS
-	int "Max IDE interfaces"
-	depends on ALPHA || SUPERH || IA64 || EMBEDDED
-	range 1 10
-	default 4
-	help
-	  This is the maximum number of IDE hardware interfaces that will
-	  be supported by the driver. Make sure it is at least as high as
-	  the number of IDE interfaces in your system.
-
 config BLK_DEV_IDE
 	tristate "Enhanced IDE/MFM/RLL disk/cdrom/tape/floppy support"
 	---help---
@@ -252,7 +242,7 @@ config BLK_DEV_IDEFLOPPY
 	  module will be called ide-floppy.
 
 config BLK_DEV_IDESCSI
-	tristate "SCSI emulation support"
+	tristate "SCSI emulation support (DEPRECATED)"
 	depends on SCSI
 	select IDE_ATAPI
 	---help---
@@ -265,20 +255,6 @@ config BLK_DEV_IDESCSI
 	  and will allow you to use a SCSI device driver instead of a native
 	  ATAPI driver.
 
-	  This is useful if you have an ATAPI device for which no native
-	  driver has been written (for example, an ATAPI PD-CD drive);
-	  you can then use this emulation together with an appropriate SCSI
-	  device driver. In order to do this, say Y here and to "SCSI support"
-	  and "SCSI generic support", below. You must then provide the kernel
-	  command line "hdx=ide-scsi" (try "man bootparam" or see the
-	  documentation of your boot loader (lilo or loadlin) about how to
-	  pass options to the kernel at boot time) for devices if you want the
-	  native EIDE sub-drivers to skip over the native support, so that
-	  this SCSI emulation can be used instead.
-
-	  Note that this option does NOT allow you to attach SCSI devices to a
-	  box that doesn't have a SCSI host adapter installed.
-
 	  If both this SCSI emulation and native ATAPI support are compiled
 	  into the kernel, the native support will be used.
 
diff --git a/drivers/ide/arm/ide_arm.c b/drivers/ide/arm/ide_arm.c
index 176532ffae0e..f728f2927b5a 100644
--- a/drivers/ide/arm/ide_arm.c
+++ b/drivers/ide/arm/ide_arm.c
@@ -11,13 +11,12 @@
 #include <linux/init.h>
 #include <linux/ide.h>
 
-#include <asm/mach-types.h>
 #include <asm/irq.h>
 
 #define DRV_NAME "ide_arm"
 
 #ifdef CONFIG_ARCH_CLPS7500
-# include <asm/arch/hardware.h>
+# include <mach/hardware.h>
 #
 # define IDE_ARM_IO	(ISASLOT_IO + 0x1f0)
 # define IDE_ARM_IRQ	IRQ_ISA_14
diff --git a/drivers/ide/arm/palm_bk3710.c b/drivers/ide/arm/palm_bk3710.c
index 3e842d60eae9..4fd91dcf1dc2 100644
--- a/drivers/ide/arm/palm_bk3710.c
+++ b/drivers/ide/arm/palm_bk3710.c
@@ -309,7 +309,7 @@ static void __devinit palm_bk3710_chipinit(void __iomem *base)
 	palm_bk3710_setpiomode(base, NULL, 1, 600, 0);
 }
 
-static u8 __devinit palm_bk3710_cable_detect(ide_hwif_t *hwif)
+static u8 palm_bk3710_cable_detect(ide_hwif_t *hwif)
 {
 	return ATA_CBL_PATA80;
 }
@@ -343,11 +343,10 @@ static struct ide_port_info __devinitdata palm_bk3710_port_info = {
 	.mwdma_mask		= ATA_MWDMA2,
 };
 
-static int __devinit palm_bk3710_probe(struct platform_device *pdev)
+static int __init palm_bk3710_probe(struct platform_device *pdev)
 {
 	struct clk *clk;
 	struct resource *mem, *irq;
-	struct ide_host *host;
 	unsigned long base, rate;
 	int i, rc;
 	hw_regs_t hw, *hws[] = { &hw, NULL, NULL, NULL };
@@ -390,6 +389,7 @@ static int __devinit palm_bk3710_probe(struct platform_device *pdev)
 		hw.io_ports_array[i] = base + IDE_PALM_ATA_PRI_REG_OFFSET + i;
 	hw.io_ports.ctl_addr = base + IDE_PALM_ATA_PRI_CTL_OFFSET;
 	hw.irq = irq->start;
+	hw.dev = &pdev->dev;
 	hw.chipset = ide_palm3710;
 
 	palm_bk3710_port_info.udma_mask = rate < 100000000 ? ATA_UDMA4 :
@@ -413,13 +413,11 @@ static struct platform_driver platform_bk_driver = {
 		.name = "palm_bk3710",
 		.owner = THIS_MODULE,
 	},
-	.probe = palm_bk3710_probe,
-	.remove = NULL,
 };
 
 static int __init palm_bk3710_init(void)
 {
-	return platform_driver_register(&platform_bk_driver);
+	return platform_driver_probe(&platform_bk_driver, palm_bk3710_probe);
 }
 
 module_init(palm_bk3710_init);
diff --git a/drivers/ide/ide-cd.c b/drivers/ide/ide-cd.c
index e617cf08aef6..f1489999cf91 100644
--- a/drivers/ide/ide-cd.c
+++ b/drivers/ide/ide-cd.c
@@ -66,11 +66,11 @@ static struct cdrom_info *ide_cd_get(struct gendisk *disk)
 	mutex_lock(&idecd_ref_mutex);
 	cd = ide_cd_g(disk);
 	if (cd) {
-		kref_get(&cd->kref);
-		if (ide_device_get(cd->drive)) {
-			kref_put(&cd->kref, ide_cd_release);
+		if (ide_device_get(cd->drive))
 			cd = NULL;
-		}
+		else
+			kref_get(&cd->kref);
+
 	}
 	mutex_unlock(&idecd_ref_mutex);
 	return cd;
@@ -78,9 +78,11 @@ static struct cdrom_info *ide_cd_get(struct gendisk *disk)
 
 static void ide_cd_put(struct cdrom_info *cd)
 {
+	ide_drive_t *drive = cd->drive;
+
 	mutex_lock(&idecd_ref_mutex);
-	ide_device_put(cd->drive);
 	kref_put(&cd->kref, ide_cd_release);
+	ide_device_put(drive);
 	mutex_unlock(&idecd_ref_mutex);
 }
 
@@ -1270,9 +1272,9 @@ static ide_startstop_t ide_cd_do_request(ide_drive_t *drive, struct request *rq,
  */
 static void msf_from_bcd(struct atapi_msf *msf)
 {
-	msf->minute = BCD2BIN(msf->minute);
-	msf->second = BCD2BIN(msf->second);
-	msf->frame  = BCD2BIN(msf->frame);
+	msf->minute = bcd2bin(msf->minute);
+	msf->second = bcd2bin(msf->second);
+	msf->frame  = bcd2bin(msf->frame);
 }
 
 int cdrom_check_status(ide_drive_t *drive, struct request_sense *sense)
@@ -1305,6 +1307,7 @@ static int cdrom_read_capacity(ide_drive_t *drive, unsigned long *capacity,
 	int stat;
 	unsigned char cmd[BLK_MAX_CDB];
 	unsigned len = sizeof(capbuf);
+	u32 blocklen;
 
 	memset(cmd, 0, BLK_MAX_CDB);
 	cmd[0] = GPCMD_READ_CDVD_CAPACITY;
@@ -1317,23 +1320,24 @@ static int cdrom_read_capacity(ide_drive_t *drive, unsigned long *capacity,
 	/*
 	 * Sanity check the given block size
 	 */
-	switch (capbuf.blocklen) {
-	case __constant_cpu_to_be32(512):
-	case __constant_cpu_to_be32(1024):
-	case __constant_cpu_to_be32(2048):
-	case __constant_cpu_to_be32(4096):
+	blocklen = be32_to_cpu(capbuf.blocklen);
+	switch (blocklen) {
+	case 512:
+	case 1024:
+	case 2048:
+	case 4096:
 		break;
 	default:
 		printk(KERN_ERR "%s: weird block size %u\n",
-			drive->name, capbuf.blocklen);
+			drive->name, blocklen);
 		printk(KERN_ERR "%s: default to 2kb block size\n",
 			drive->name);
-		capbuf.blocklen = __constant_cpu_to_be32(2048);
+		blocklen = 2048;
 		break;
 	}
 
 	*capacity = 1 + be32_to_cpu(capbuf.lba);
-	*sectors_per_frame = be32_to_cpu(capbuf.blocklen) >> SECTOR_BITS;
+	*sectors_per_frame = blocklen >> SECTOR_BITS;
 	return 0;
 }
 
@@ -1411,8 +1415,8 @@ int ide_cd_read_toc(ide_drive_t *drive, struct request_sense *sense)
 		return stat;
 
 	if (drive->atapi_flags & IDE_AFLAG_TOCTRACKS_AS_BCD) {
-		toc->hdr.first_track = BCD2BIN(toc->hdr.first_track);
-		toc->hdr.last_track  = BCD2BIN(toc->hdr.last_track);
+		toc->hdr.first_track = bcd2bin(toc->hdr.first_track);
+		toc->hdr.last_track  = bcd2bin(toc->hdr.last_track);
 	}
 
 	ntracks = toc->hdr.last_track - toc->hdr.first_track + 1;
@@ -1452,8 +1456,8 @@ int ide_cd_read_toc(ide_drive_t *drive, struct request_sense *sense)
 			return stat;
 
 		if (drive->atapi_flags & IDE_AFLAG_TOCTRACKS_AS_BCD) {
-			toc->hdr.first_track = (u8)BIN2BCD(CDROM_LEADOUT);
-			toc->hdr.last_track = (u8)BIN2BCD(CDROM_LEADOUT);
+			toc->hdr.first_track = (u8)bin2bcd(CDROM_LEADOUT);
+			toc->hdr.last_track = (u8)bin2bcd(CDROM_LEADOUT);
 		} else {
 			toc->hdr.first_track = CDROM_LEADOUT;
 			toc->hdr.last_track = CDROM_LEADOUT;
@@ -1466,14 +1470,14 @@ int ide_cd_read_toc(ide_drive_t *drive, struct request_sense *sense)
 	toc->hdr.toc_length = be16_to_cpu(toc->hdr.toc_length);
 
 	if (drive->atapi_flags & IDE_AFLAG_TOCTRACKS_AS_BCD) {
-		toc->hdr.first_track = BCD2BIN(toc->hdr.first_track);
-		toc->hdr.last_track  = BCD2BIN(toc->hdr.last_track);
+		toc->hdr.first_track = bcd2bin(toc->hdr.first_track);
+		toc->hdr.last_track  = bcd2bin(toc->hdr.last_track);
 	}
 
 	for (i = 0; i <= ntracks; i++) {
 		if (drive->atapi_flags & IDE_AFLAG_TOCADDR_AS_BCD) {
 			if (drive->atapi_flags & IDE_AFLAG_TOCTRACKS_AS_BCD)
-				toc->ent[i].track = BCD2BIN(toc->ent[i].track);
+				toc->ent[i].track = bcd2bin(toc->ent[i].track);
 			msf_from_bcd(&toc->ent[i].addr.msf);
 		}
 		toc->ent[i].addr.lba = msf_to_lba(toc->ent[i].addr.msf.minute,
@@ -1929,6 +1933,7 @@ static void ide_cd_remove(ide_drive_t *drive)
 
 	ide_proc_unregister_driver(drive, info->driver);
 
+	blk_unregister_filter(info->disk);
 	del_gendisk(info->disk);
 
 	ide_cd_put(info);
@@ -2154,6 +2159,7 @@ static int ide_cd_probe(ide_drive_t *drive)
 	g->fops = &idecd_ops;
 	g->flags |= GENHD_FL_REMOVABLE;
 	add_disk(g);
+	blk_register_filter(g);
 	return 0;
 
 out_free_cd:
diff --git a/drivers/ide/ide-disk.c b/drivers/ide/ide-disk.c
index 28d85b410f7c..07ef88bd109b 100644
--- a/drivers/ide/ide-disk.c
+++ b/drivers/ide/ide-disk.c
@@ -65,11 +65,10 @@ static struct ide_disk_obj *ide_disk_get(struct gendisk *disk)
 	mutex_lock(&idedisk_ref_mutex);
 	idkp = ide_disk_g(disk);
 	if (idkp) {
-		kref_get(&idkp->kref);
-		if (ide_device_get(idkp->drive)) {
-			kref_put(&idkp->kref, ide_disk_release);
+		if (ide_device_get(idkp->drive))
 			idkp = NULL;
-		}
+		else
+			kref_get(&idkp->kref);
 	}
 	mutex_unlock(&idedisk_ref_mutex);
 	return idkp;
@@ -77,9 +76,11 @@ static struct ide_disk_obj *ide_disk_get(struct gendisk *disk)
 
 static void ide_disk_put(struct ide_disk_obj *idkp)
 {
+	ide_drive_t *drive = idkp->drive;
+
 	mutex_lock(&idedisk_ref_mutex);
-	ide_device_put(idkp->drive);
 	kref_put(&idkp->kref, ide_disk_release);
+	ide_device_put(drive);
 	mutex_unlock(&idedisk_ref_mutex);
 }
 
@@ -444,20 +445,6 @@ static void idedisk_check_hpa(ide_drive_t *drive)
 	}
 }
 
-/*
- * Compute drive->capacity, the full capacity of the drive
- * Called with drive->id != NULL.
- *
- * To compute capacity, this uses either of
- *
- *    1. CHS value set by user       (whatever user sets will be trusted)
- *    2. LBA value from target drive (require new ATA feature)
- *    3. LBA value from system BIOS  (new one is OK, old one may break)
- *    4. CHS value from system BIOS  (traditional style)
- *
- * in above order (i.e., if value of higher priority is available,
- * reset will be ignored).
- */
 static void init_idedisk_capacity(ide_drive_t *drive)
 {
 	struct hd_driveid *id = drive->id;
diff --git a/drivers/ide/ide-dma.c b/drivers/ide/ide-dma.c
index 71c377a7bcf2..adc682755857 100644
--- a/drivers/ide/ide-dma.c
+++ b/drivers/ide/ide-dma.c
@@ -649,11 +649,7 @@ static unsigned int ide_get_mode_mask(ide_drive_t *drive, u8 base, u8 req_mode)
 		if (id->field_valid & 2) {
 			mask = id->dma_1word & hwif->swdma_mask;
 		} else if (id->tDMA) {
-			/*
-			 * ide_fix_driveid() doesn't convert ->tDMA to the
-			 * CPU endianness so we need to do it here
-			 */
-			u8 mode = le16_to_cpu(id->tDMA);
+			u8 mode = id->tDMA;
 
 			/*
 			 * if the mode is valid convert it to the mask
diff --git a/drivers/ide/ide-floppy.c b/drivers/ide/ide-floppy.c
index ca11a26746f1..e9034c0125f3 100644
--- a/drivers/ide/ide-floppy.c
+++ b/drivers/ide/ide-floppy.c
@@ -167,11 +167,10 @@ static struct ide_floppy_obj *ide_floppy_get(struct gendisk *disk)
 	mutex_lock(&idefloppy_ref_mutex);
 	floppy = ide_floppy_g(disk);
 	if (floppy) {
-		kref_get(&floppy->kref);
-		if (ide_device_get(floppy->drive)) {
-			kref_put(&floppy->kref, idefloppy_cleanup_obj);
+		if (ide_device_get(floppy->drive))
 			floppy = NULL;
-		}
+		else
+			kref_get(&floppy->kref);
 	}
 	mutex_unlock(&idefloppy_ref_mutex);
 	return floppy;
@@ -179,9 +178,11 @@ static struct ide_floppy_obj *ide_floppy_get(struct gendisk *disk)
 
 static void ide_floppy_put(struct ide_floppy_obj *floppy)
 {
+	ide_drive_t *drive = floppy->drive;
+
 	mutex_lock(&idefloppy_ref_mutex);
-	ide_device_put(floppy->drive);
 	kref_put(&floppy->kref, idefloppy_cleanup_obj);
+	ide_device_put(drive);
 	mutex_unlock(&idefloppy_ref_mutex);
 }
 
diff --git a/drivers/ide/ide-iops.c b/drivers/ide/ide-iops.c
index 8aae91764513..2cbadffe922e 100644
--- a/drivers/ide/ide-iops.c
+++ b/drivers/ide/ide-iops.c
@@ -484,11 +484,11 @@ void ide_fix_driveid (struct hd_driveid *id)
 	for (i = 0; i < 3; i++)
 		id->words157_159[i] = __le16_to_cpu(id->words157_159[i]);
 	id->cfa_power      = __le16_to_cpu(id->cfa_power);
-	for (i = 0; i < 14; i++)
+	for (i = 0; i < 15; i++)
 		id->words161_175[i] = __le16_to_cpu(id->words161_175[i]);
-	for (i = 0; i < 31; i++)
+	for (i = 0; i < 30; i++)
 		id->words176_205[i] = __le16_to_cpu(id->words176_205[i]);
-	for (i = 0; i < 48; i++)
+	for (i = 0; i < 49; i++)
 		id->words206_254[i] = __le16_to_cpu(id->words206_254[i]);
 	id->integrity_word  = __le16_to_cpu(id->integrity_word);
 # else
diff --git a/drivers/ide/ide-tape.c b/drivers/ide/ide-tape.c
index 82c2afe4d28a..1bce84b56630 100644
--- a/drivers/ide/ide-tape.c
+++ b/drivers/ide/ide-tape.c
@@ -331,11 +331,10 @@ static struct ide_tape_obj *ide_tape_get(struct gendisk *disk)
 	mutex_lock(&idetape_ref_mutex);
 	tape = ide_tape_g(disk);
 	if (tape) {
-		kref_get(&tape->kref);
-		if (ide_device_get(tape->drive)) {
-			kref_put(&tape->kref, ide_tape_release);
+		if (ide_device_get(tape->drive))
 			tape = NULL;
-		}
+		else
+			kref_get(&tape->kref);
 	}
 	mutex_unlock(&idetape_ref_mutex);
 	return tape;
@@ -343,9 +342,11 @@ static struct ide_tape_obj *ide_tape_get(struct gendisk *disk)
 
 static void ide_tape_put(struct ide_tape_obj *tape)
 {
+	ide_drive_t *drive = tape->drive;
+
 	mutex_lock(&idetape_ref_mutex);
-	ide_device_put(tape->drive);
 	kref_put(&tape->kref, ide_tape_release);
+	ide_device_put(drive);
 	mutex_unlock(&idetape_ref_mutex);
 }
 
diff --git a/drivers/ide/pci/aec62xx.c b/drivers/ide/pci/aec62xx.c
index e0c8fe7d9fea..3187215e8f89 100644
--- a/drivers/ide/pci/aec62xx.c
+++ b/drivers/ide/pci/aec62xx.c
@@ -160,7 +160,7 @@ static unsigned int __devinit init_chipset_aec62xx(struct pci_dev *dev)
 	return dev->irq;
 }
 
-static u8 __devinit atp86x_cable_detect(ide_hwif_t *hwif)
+static u8 atp86x_cable_detect(ide_hwif_t *hwif)
 {
 	struct pci_dev *dev = to_pci_dev(hwif->dev);
 	u8 ata66 = 0, mask = hwif->channel ? 0x02 : 0x01;
@@ -307,7 +307,7 @@ static struct pci_driver driver = {
 	.name		= "AEC62xx_IDE",
 	.id_table	= aec62xx_pci_tbl,
 	.probe		= aec62xx_init_one,
-	.remove		= aec62xx_remove,
+	.remove		= __devexit_p(aec62xx_remove),
 };
 
 static int __init aec62xx_ide_init(void)
diff --git a/drivers/ide/pci/alim15x3.c b/drivers/ide/pci/alim15x3.c
index b582687e0cd4..d647526af557 100644
--- a/drivers/ide/pci/alim15x3.c
+++ b/drivers/ide/pci/alim15x3.c
@@ -371,7 +371,7 @@ static int ali_cable_override(struct pci_dev *pdev)
  *	FIXME: frobs bits that are not defined on newer ALi devicea
  */
 
-static u8 __devinit ali_cable_detect(ide_hwif_t *hwif)
+static u8 ali_cable_detect(ide_hwif_t *hwif)
 {
 	struct pci_dev *dev = to_pci_dev(hwif->dev);
 	unsigned long flags;
diff --git a/drivers/ide/pci/amd74xx.c b/drivers/ide/pci/amd74xx.c
index 2cea7bf51a0f..1e66a960a96a 100644
--- a/drivers/ide/pci/amd74xx.c
+++ b/drivers/ide/pci/amd74xx.c
@@ -175,7 +175,7 @@ static unsigned int __devinit init_chipset_amd74xx(struct pci_dev *dev)
 	return dev->irq;
 }
 
-static u8 __devinit amd_cable_detect(ide_hwif_t *hwif)
+static u8 amd_cable_detect(ide_hwif_t *hwif)
 {
 	if ((amd_80w >> hwif->channel) & 1)
 		return ATA_CBL_PATA80;
diff --git a/drivers/ide/pci/atiixp.c b/drivers/ide/pci/atiixp.c
index 332f08f43b56..41f6cb6c163a 100644
--- a/drivers/ide/pci/atiixp.c
+++ b/drivers/ide/pci/atiixp.c
@@ -119,7 +119,7 @@ static void atiixp_set_dma_mode(ide_drive_t *drive, const u8 speed)
 	spin_unlock_irqrestore(&atiixp_lock, flags);
 }
 
-static u8 __devinit atiixp_cable_detect(ide_hwif_t *hwif)
+static u8 atiixp_cable_detect(ide_hwif_t *hwif)
 {
 	struct pci_dev *pdev = to_pci_dev(hwif->dev);
 	u8 udma_mode = 0, ch = hwif->channel;
diff --git a/drivers/ide/pci/cmd64x.c b/drivers/ide/pci/cmd64x.c
index 1360b4fa9fd3..e064398e03b4 100644
--- a/drivers/ide/pci/cmd64x.c
+++ b/drivers/ide/pci/cmd64x.c
@@ -354,7 +354,7 @@ static unsigned int __devinit init_chipset_cmd64x(struct pci_dev *dev)
 	return 0;
 }
 
-static u8 __devinit cmd64x_cable_detect(ide_hwif_t *hwif)
+static u8 cmd64x_cable_detect(ide_hwif_t *hwif)
 {
 	struct pci_dev  *dev	= to_pci_dev(hwif->dev);
 	u8 bmidecsr = 0, mask	= hwif->channel ? 0x02 : 0x01;
diff --git a/drivers/ide/pci/cs5520.c b/drivers/ide/pci/cs5520.c
index c0364b287f17..151844fcbb07 100644
--- a/drivers/ide/pci/cs5520.c
+++ b/drivers/ide/pci/cs5520.c
@@ -96,6 +96,7 @@ static const struct ide_port_ops cs5520_port_ops = {
 
 static const struct ide_port_info cyrix_chipset __devinitdata = {
 	.name		= DRV_NAME,
+	.enablebits	= { { 0x60, 0x01, 0x01 }, { 0x60, 0x02, 0x02 } },
 	.port_ops	= &cs5520_port_ops,
 	.host_flags	= IDE_HFLAG_ISA_PORTS | IDE_HFLAG_CS5520,
 	.pio_mask	= ATA_PIO4,
diff --git a/drivers/ide/pci/cs5535.c b/drivers/ide/pci/cs5535.c
index f7b50cdeefa6..dd3dc23af995 100644
--- a/drivers/ide/pci/cs5535.c
+++ b/drivers/ide/pci/cs5535.c
@@ -153,7 +153,7 @@ static void cs5535_set_pio_mode(ide_drive_t *drive, const u8 pio)
 	cs5535_set_speed(drive, XFER_PIO_0 + pio);
 }
 
-static u8 __devinit cs5535_cable_detect(ide_hwif_t *hwif)
+static u8 cs5535_cable_detect(ide_hwif_t *hwif)
 {
 	struct pci_dev *dev = to_pci_dev(hwif->dev);
 	u8 bit;
diff --git a/drivers/ide/pci/cy82c693.c b/drivers/ide/pci/cy82c693.c
index bfae2f882f48..e6d8ee88d56d 100644
--- a/drivers/ide/pci/cy82c693.c
+++ b/drivers/ide/pci/cy82c693.c
@@ -447,7 +447,7 @@ static struct pci_driver driver = {
 	.name		= "Cypress_IDE",
 	.id_table	= cy82c693_pci_tbl,
 	.probe		= cy82c693_init_one,
-	.remove		= cy82c693_remove,
+	.remove		= __devexit_p(cy82c693_remove),
 };
 
 static int __init cy82c693_ide_init(void)
diff --git a/drivers/ide/pci/hpt366.c b/drivers/ide/pci/hpt366.c
index 5271b246b88c..eb107eef0dbc 100644
--- a/drivers/ide/pci/hpt366.c
+++ b/drivers/ide/pci/hpt366.c
@@ -1214,7 +1214,7 @@ static unsigned int __devinit init_chipset_hpt366(struct pci_dev *dev)
 	return dev->irq;
 }
 
-static u8 __devinit hpt3xx_cable_detect(ide_hwif_t *hwif)
+static u8 hpt3xx_cable_detect(ide_hwif_t *hwif)
 {
 	struct pci_dev	*dev	= to_pci_dev(hwif->dev);
 	struct ide_host *host	= pci_get_drvdata(dev);
@@ -1620,7 +1620,7 @@ static struct pci_driver driver = {
 	.name		= "HPT366_IDE",
 	.id_table	= hpt366_pci_tbl,
 	.probe		= hpt366_init_one,
-	.remove		= hpt366_remove,
+	.remove		= __devexit_p(hpt366_remove),
 };
 
 static int __init hpt366_ide_init(void)
diff --git a/drivers/ide/pci/it8213.c b/drivers/ide/pci/it8213.c
index 6eba8f188264..652e47dd7e89 100644
--- a/drivers/ide/pci/it8213.c
+++ b/drivers/ide/pci/it8213.c
@@ -141,7 +141,7 @@ static void it8213_set_dma_mode(ide_drive_t *drive, const u8 speed)
 	}
 }
 
-static u8 __devinit it8213_cable_detect(ide_hwif_t *hwif)
+static u8 it8213_cable_detect(ide_hwif_t *hwif)
 {
 	struct pci_dev *dev = to_pci_dev(hwif->dev);
 	u8 reg42h = 0;
diff --git a/drivers/ide/pci/it821x.c b/drivers/ide/pci/it821x.c
index e16a1d113a2a..4a1508a707cc 100644
--- a/drivers/ide/pci/it821x.c
+++ b/drivers/ide/pci/it821x.c
@@ -428,7 +428,7 @@ static void it821x_set_dma_mode(ide_drive_t *drive, const u8 speed)
  *	the needed logic onboard.
  */
 
-static u8 __devinit it821x_cable_detect(ide_hwif_t *hwif)
+static u8 it821x_cable_detect(ide_hwif_t *hwif)
 {
 	/* The reference driver also only does disk side */
 	return ATA_CBL_PATA80;
@@ -443,7 +443,7 @@ static u8 __devinit it821x_cable_detect(ide_hwif_t *hwif)
  *	final tuning that is needed, or fixups to work around bugs.
  */
 
-static void __devinit it821x_quirkproc(ide_drive_t *drive)
+static void it821x_quirkproc(ide_drive_t *drive)
 {
 	struct it821x_dev *itdev = ide_get_hwifdata(drive->hwif);
 	struct hd_driveid *id = drive->id;
@@ -686,7 +686,7 @@ static struct pci_driver driver = {
 	.name		= "ITE821x IDE",
 	.id_table	= it821x_pci_tbl,
 	.probe		= it821x_init_one,
-	.remove		= it821x_remove,
+	.remove		= __devexit_p(it821x_remove),
 };
 
 static int __init it821x_ide_init(void)
diff --git a/drivers/ide/pci/jmicron.c b/drivers/ide/pci/jmicron.c
index 545b6e172d9b..bb9d09d8f196 100644
--- a/drivers/ide/pci/jmicron.c
+++ b/drivers/ide/pci/jmicron.c
@@ -27,7 +27,7 @@ typedef enum {
  *	Returns the cable type.
  */
 
-static u8 __devinit jmicron_cable_detect(ide_hwif_t *hwif)
+static u8 jmicron_cable_detect(ide_hwif_t *hwif)
 {
 	struct pci_dev *pdev = to_pci_dev(hwif->dev);
 
diff --git a/drivers/ide/pci/pdc202xx_new.c b/drivers/ide/pci/pdc202xx_new.c
index 998615fa285f..d477da6b5858 100644
--- a/drivers/ide/pci/pdc202xx_new.c
+++ b/drivers/ide/pci/pdc202xx_new.c
@@ -193,7 +193,7 @@ static void pdcnew_set_pio_mode(ide_drive_t *drive, const u8 pio)
 	}
 }
 
-static u8 __devinit pdcnew_cable_detect(ide_hwif_t *hwif)
+static u8 pdcnew_cable_detect(ide_hwif_t *hwif)
 {
 	if (get_indexed_reg(hwif, 0x0b) & 0x04)
 		return ATA_CBL_PATA40;
@@ -566,7 +566,7 @@ static struct pci_driver driver = {
 	.name		= "Promise_IDE",
 	.id_table	= pdc202new_pci_tbl,
 	.probe		= pdc202new_init_one,
-	.remove		= pdc202new_remove,
+	.remove		= __devexit_p(pdc202new_remove),
 };
 
 static int __init pdc202new_ide_init(void)
diff --git a/drivers/ide/pci/pdc202xx_old.c b/drivers/ide/pci/pdc202xx_old.c
index 6ff2def58da0..de9a27400462 100644
--- a/drivers/ide/pci/pdc202xx_old.c
+++ b/drivers/ide/pci/pdc202xx_old.c
@@ -117,7 +117,7 @@ static void pdc202xx_set_pio_mode(ide_drive_t *drive, const u8 pio)
 	pdc202xx_set_mode(drive, XFER_PIO_0 + pio);
 }
 
-static u8 __devinit pdc2026x_cable_detect(ide_hwif_t *hwif)
+static u8 pdc2026x_cable_detect(ide_hwif_t *hwif)
 {
 	struct pci_dev *dev = to_pci_dev(hwif->dev);
 	u16 CIS, mask = hwif->channel ? (1 << 11) : (1 << 10);
diff --git a/drivers/ide/pci/piix.c b/drivers/ide/pci/piix.c
index 7fc3022dcf68..30cfc815fe31 100644
--- a/drivers/ide/pci/piix.c
+++ b/drivers/ide/pci/piix.c
@@ -256,7 +256,7 @@ static const struct ich_laptop ich_laptop[] = {
 	{ 0, }
 };
 
-static u8 __devinit piix_cable_detect(ide_hwif_t *hwif)
+static u8 piix_cable_detect(ide_hwif_t *hwif)
 {
 	struct pci_dev *pdev = to_pci_dev(hwif->dev);
 	const struct ich_laptop *lap = &ich_laptop[0];
diff --git a/drivers/ide/pci/scc_pata.c b/drivers/ide/pci/scc_pata.c
index 94a7ab864236..44cccd1e086a 100644
--- a/drivers/ide/pci/scc_pata.c
+++ b/drivers/ide/pci/scc_pata.c
@@ -827,7 +827,7 @@ static void __devinit init_iops_scc(ide_hwif_t *hwif)
 	init_mmio_iops_scc(hwif);
 }
 
-static u8 __devinit scc_cable_detect(ide_hwif_t *hwif)
+static u8 scc_cable_detect(ide_hwif_t *hwif)
 {
 	return ATA_CBL_PATA80;
 }
@@ -954,7 +954,7 @@ static struct pci_driver driver = {
 	.name = "SCC IDE",
 	.id_table = scc_pci_tbl,
 	.probe = scc_init_one,
-	.remove = scc_remove,
+	.remove = __devexit_p(scc_remove),
 };
 
 static int scc_ide_init(void)
diff --git a/drivers/ide/pci/serverworks.c b/drivers/ide/pci/serverworks.c
index d173f2937722..c3bdc6e51a48 100644
--- a/drivers/ide/pci/serverworks.c
+++ b/drivers/ide/pci/serverworks.c
@@ -272,7 +272,7 @@ static unsigned int __devinit init_chipset_svwks(struct pci_dev *dev)
 	return dev->irq;
 }
 
-static u8 __devinit ata66_svwks_svwks(ide_hwif_t *hwif)
+static u8 ata66_svwks_svwks(ide_hwif_t *hwif)
 {
 	return ATA_CBL_PATA80;
 }
@@ -284,7 +284,7 @@ static u8 __devinit ata66_svwks_svwks(ide_hwif_t *hwif)
  * Bit 14 clear = primary IDE channel does not have 80-pin cable.
  * Bit 14 set   = primary IDE channel has 80-pin cable.
  */
-static u8 __devinit ata66_svwks_dell(ide_hwif_t *hwif)
+static u8 ata66_svwks_dell(ide_hwif_t *hwif)
 {
 	struct pci_dev *dev = to_pci_dev(hwif->dev);
 
@@ -303,7 +303,7 @@ static u8 __devinit ata66_svwks_dell(ide_hwif_t *hwif)
  *
  * WARNING: this only works on Alpine hardware!
  */
-static u8 __devinit ata66_svwks_cobalt(ide_hwif_t *hwif)
+static u8 ata66_svwks_cobalt(ide_hwif_t *hwif)
 {
 	struct pci_dev *dev = to_pci_dev(hwif->dev);
 
@@ -315,7 +315,7 @@ static u8 __devinit ata66_svwks_cobalt(ide_hwif_t *hwif)
 	return ATA_CBL_PATA40;
 }
 
-static u8 __devinit svwks_cable_detect(ide_hwif_t *hwif)
+static u8 svwks_cable_detect(ide_hwif_t *hwif)
 {
 	struct pci_dev *dev = to_pci_dev(hwif->dev);
 
diff --git a/drivers/ide/pci/sgiioc4.c b/drivers/ide/pci/sgiioc4.c
index 42eef19a18f1..681306c9d79b 100644
--- a/drivers/ide/pci/sgiioc4.c
+++ b/drivers/ide/pci/sgiioc4.c
@@ -621,9 +621,9 @@ sgiioc4_ide_setup_pci_device(struct pci_dev *dev)
 	if (!request_mem_region(cmd_phys_base, IOC4_CMD_CTL_BLK_SIZE,
 	    DRV_NAME)) {
 		printk(KERN_ERR
-			"%s : %s -- ERROR, Addresses "
+			"%s %s: -- ERROR, Addresses "
 			"0x%p to 0x%p ALREADY in use\n",
-		       __func__, DRV_NAME, (void *) cmd_phys_base,
+		       DRV_NAME, pci_name(dev), (void *)cmd_phys_base,
 		       (void *) cmd_phys_base + IOC4_CMD_CTL_BLK_SIZE);
 		return -ENOMEM;
 	}
diff --git a/drivers/ide/pci/siimage.c b/drivers/ide/pci/siimage.c
index b8ad9ad6cf0d..db2b88a369ab 100644
--- a/drivers/ide/pci/siimage.c
+++ b/drivers/ide/pci/siimage.c
@@ -639,7 +639,7 @@ static int is_dev_seagate_sata(ide_drive_t *drive)
  *	that can occur before we know what drives are present.
  */
 
-static void __devinit sil_quirkproc(ide_drive_t *drive)
+static void sil_quirkproc(ide_drive_t *drive)
 {
 	ide_hwif_t *hwif = drive->hwif;
 
@@ -679,7 +679,7 @@ static void __devinit init_iops_siimage(ide_hwif_t *hwif)
  *	Check for the presence of an ATA66 capable cable on the interface.
  */
 
-static u8 __devinit sil_cable_detect(ide_hwif_t *hwif)
+static u8 sil_cable_detect(ide_hwif_t *hwif)
 {
 	struct pci_dev *dev	= to_pci_dev(hwif->dev);
 	unsigned long addr	= siimage_selreg(hwif, 0);
@@ -832,7 +832,7 @@ static struct pci_driver driver = {
 	.name		= "SiI_IDE",
 	.id_table	= siimage_pci_tbl,
 	.probe		= siimage_init_one,
-	.remove		= siimage_remove,
+	.remove		= __devexit_p(siimage_remove),
 };
 
 static int __init siimage_ide_init(void)
diff --git a/drivers/ide/pci/sis5513.c b/drivers/ide/pci/sis5513.c
index cc95f90b53b7..5efe21d6ef97 100644
--- a/drivers/ide/pci/sis5513.c
+++ b/drivers/ide/pci/sis5513.c
@@ -518,7 +518,7 @@ static const struct sis_laptop sis_laptop[] = {
 	{ 0, }
 };
 
-static u8 __devinit sis_cable_detect(ide_hwif_t *hwif)
+static u8 sis_cable_detect(ide_hwif_t *hwif)
 {
 	struct pci_dev *pdev = to_pci_dev(hwif->dev);
 	const struct sis_laptop *lap = &sis_laptop[0];
@@ -610,7 +610,7 @@ static struct pci_driver driver = {
 	.name		= "SIS_IDE",
 	.id_table	= sis5513_pci_tbl,
 	.probe		= sis5513_init_one,
-	.remove		= sis5513_remove,
+	.remove		= __devexit_p(sis5513_remove),
 };
 
 static int __init sis5513_ide_init(void)
diff --git a/drivers/ide/pci/slc90e66.c b/drivers/ide/pci/slc90e66.c
index 13d1fa491f26..866d6c65e3a0 100644
--- a/drivers/ide/pci/slc90e66.c
+++ b/drivers/ide/pci/slc90e66.c
@@ -116,7 +116,7 @@ static void slc90e66_set_dma_mode(ide_drive_t *drive, const u8 speed)
 	}
 }
 
-static u8 __devinit slc90e66_cable_detect(ide_hwif_t *hwif)
+static u8 slc90e66_cable_detect(ide_hwif_t *hwif)
 {
 	struct pci_dev *dev = to_pci_dev(hwif->dev);
 	u8 reg47 = 0, mask = hwif->channel ? 0x01 : 0x02;
diff --git a/drivers/ide/pci/tc86c001.c b/drivers/ide/pci/tc86c001.c
index b1cb8a9ce5a9..927277c54ec9 100644
--- a/drivers/ide/pci/tc86c001.c
+++ b/drivers/ide/pci/tc86c001.c
@@ -131,7 +131,7 @@ static void tc86c001_dma_start(ide_drive_t *drive)
 	ide_dma_start(drive);
 }
 
-static u8 __devinit tc86c001_cable_detect(ide_hwif_t *hwif)
+static u8 tc86c001_cable_detect(ide_hwif_t *hwif)
 {
 	struct pci_dev *dev = to_pci_dev(hwif->dev);
 	unsigned long sc_base = pci_resource_start(dev, 5);
@@ -249,7 +249,7 @@ static struct pci_driver driver = {
 	.name		= "TC86C001",
 	.id_table	= tc86c001_pci_tbl,
 	.probe		= tc86c001_init_one,
-	.remove		= tc86c001_remove,
+	.remove		= __devexit_p(tc86c001_remove),
 };
 
 static int __init tc86c001_ide_init(void)
diff --git a/drivers/ide/pci/via82cxxx.c b/drivers/ide/pci/via82cxxx.c
index 454d2bf62dce..94fb9ab3223f 100644
--- a/drivers/ide/pci/via82cxxx.c
+++ b/drivers/ide/pci/via82cxxx.c
@@ -352,7 +352,7 @@ static int via_cable_override(struct pci_dev *pdev)
 	return 0;
 }
 
-static u8 __devinit via82cxxx_cable_detect(ide_hwif_t *hwif)
+static u8 via82cxxx_cable_detect(ide_hwif_t *hwif)
 {
 	struct pci_dev *pdev = to_pci_dev(hwif->dev);
 	struct ide_host *host = pci_get_drvdata(pdev);
@@ -491,7 +491,7 @@ static struct pci_driver driver = {
 	.name 		= "VIA_IDE",
 	.id_table 	= via_pci_tbl,
 	.probe 		= via_init_one,
-	.remove		= via_remove,
+	.remove		= __devexit_p(via_remove),
 };
 
 static int __init via_ide_init(void)
diff --git a/drivers/ide/ppc/pmac.c b/drivers/ide/ppc/pmac.c
index c521bf6e1bf2..fa2be26272d5 100644
--- a/drivers/ide/ppc/pmac.c
+++ b/drivers/ide/ppc/pmac.c
@@ -1086,6 +1086,11 @@ static int __devinit pmac_ide_setup_device(pmac_ide_hwif_t *pmif, hw_regs_t *hw)
 	/* Make sure we have sane timings */
 	sanitize_timings(pmif);
 
+	host = ide_host_alloc(&d, hws);
+	if (host == NULL)
+		return -ENOMEM;
+	hwif = host->ports[0];
+
 #ifndef CONFIG_PPC64
 	/* XXX FIXME: Media bay stuff need re-organizing */
 	if (np->parent && np->parent->name
@@ -1119,11 +1124,11 @@ static int __devinit pmac_ide_setup_device(pmac_ide_hwif_t *pmif, hw_regs_t *hw)
 			 pmif->mdev ? "macio" : "PCI", pmif->aapl_bus_id,
 			 pmif->mediabay ? " (mediabay)" : "", hw->irq);
 
-	rc = ide_host_add(&d, hws, &host);
-	if (rc)
+	rc = ide_host_register(host, &d, hws);
+	if (rc) {
+		ide_host_free(host);
 		return rc;
-
-	hwif = host->ports[0];
+	}
 
 	return 0;
 }
diff --git a/drivers/ieee1394/nodemgr.c b/drivers/ieee1394/nodemgr.c
index 994a21e5a0aa..16240a789650 100644
--- a/drivers/ieee1394/nodemgr.c
+++ b/drivers/ieee1394/nodemgr.c
@@ -844,7 +844,7 @@ static struct node_entry *nodemgr_create_node(octlet_t guid, struct csr1212_csr
 	ne->host = host;
 	ne->nodeid = nodeid;
 	ne->generation = generation;
-	ne->needs_probe = 1;
+	ne->needs_probe = true;
 
 	ne->guid = guid;
 	ne->guid_vendor_id = (guid >> 40) & 0xffffff;
@@ -1144,7 +1144,7 @@ static void nodemgr_process_root_directory(struct host_info *hi, struct node_ent
 	struct csr1212_keyval *kv, *vendor_name_kv = NULL;
 	u8 last_key_id = 0;
 
-	ne->needs_probe = 0;
+	ne->needs_probe = false;
 
 	csr1212_for_each_dir_entry(ne->csr, kv, ne->csr->root_kv, dentry) {
 		switch (kv->key.id) {
@@ -1295,7 +1295,7 @@ static void nodemgr_update_node(struct node_entry *ne, struct csr1212_csr *csr,
 		nodemgr_update_bus_options(ne);
 
 		/* Mark the node as new, so it gets re-probed */
-		ne->needs_probe = 1;
+		ne->needs_probe = true;
 	} else {
 		/* old cache is valid, so update its generation */
 		struct nodemgr_csr_info *ci = ne->csr->private;
@@ -1566,57 +1566,60 @@ static void nodemgr_probe_ne(struct host_info *hi, struct node_entry *ne, int ge
 struct probe_param {
 	struct host_info *hi;
 	int generation;
+	bool probe_now;
 };
 
-static int __nodemgr_node_probe(struct device *dev, void *data)
+static int node_probe(struct device *dev, void *data)
 {
-	struct probe_param *param = (struct probe_param *)data;
+	struct probe_param *p = data;
 	struct node_entry *ne;
 
+	if (p->generation != get_hpsb_generation(p->hi->host))
+		return -EAGAIN;
+
 	ne = container_of(dev, struct node_entry, node_dev);
-	if (!ne->needs_probe)
-		nodemgr_probe_ne(param->hi, ne, param->generation);
-	if (ne->needs_probe)
-		nodemgr_probe_ne(param->hi, ne, param->generation);
+	if (ne->needs_probe == p->probe_now)
+		nodemgr_probe_ne(p->hi, ne, p->generation);
 	return 0;
 }
 
 static void nodemgr_node_probe(struct host_info *hi, int generation)
 {
-	struct hpsb_host *host = hi->host;
-	struct probe_param param;
+	struct probe_param p;
 
-	param.hi = hi;
-	param.generation = generation;
-	/* Do some processing of the nodes we've probed. This pulls them
+	p.hi = hi;
+	p.generation = generation;
+	/*
+	 * Do some processing of the nodes we've probed. This pulls them
 	 * into the sysfs layer if needed, and can result in processing of
 	 * unit-directories, or just updating the node and it's
 	 * unit-directories.
 	 *
 	 * Run updates before probes. Usually, updates are time-critical
-	 * while probes are time-consuming. (Well, those probes need some
-	 * improvement...) */
-
-	class_for_each_device(&nodemgr_ne_class, NULL, &param,
-			      __nodemgr_node_probe);
-
-	/* If we had a bus reset while we were scanning the bus, it is
-	 * possible that we did not probe all nodes.  In that case, we
-	 * skip the clean up for now, since we could remove nodes that
-	 * were still on the bus.  Another bus scan is pending which will
-	 * do the clean up eventually.
+	 * while probes are time-consuming.
 	 *
+	 * Meanwhile, another bus reset may have happened. In this case we
+	 * skip everything here and let the next bus scan handle it.
+	 * Otherwise we may prematurely remove nodes which are still there.
+	 */
+	p.probe_now = false;
+	if (class_for_each_device(&nodemgr_ne_class, NULL, &p, node_probe) != 0)
+		return;
+
+	p.probe_now = true;
+	if (class_for_each_device(&nodemgr_ne_class, NULL, &p, node_probe) != 0)
+		return;
+	/*
 	 * Now let's tell the bus to rescan our devices. This may seem
 	 * like overhead, but the driver-model core will only scan a
 	 * device for a driver when either the device is added, or when a
 	 * new driver is added. A bus reset is a good reason to rescan
 	 * devices that were there before.  For example, an sbp2 device
 	 * may become available for login, if the host that held it was
-	 * just removed.  */
-
-	if (generation == get_hpsb_generation(host))
-		if (bus_rescan_devices(&ieee1394_bus_type))
-			HPSB_DEBUG("bus_rescan_devices had an error");
+	 * just removed.
+	 */
+	if (bus_rescan_devices(&ieee1394_bus_type) != 0)
+		HPSB_DEBUG("bus_rescan_devices had an error");
 }
 
 static int nodemgr_send_resume_packet(struct hpsb_host *host)
diff --git a/drivers/ieee1394/nodemgr.h b/drivers/ieee1394/nodemgr.h
index 919e92e2a955..6eb26465a84c 100644
--- a/drivers/ieee1394/nodemgr.h
+++ b/drivers/ieee1394/nodemgr.h
@@ -97,7 +97,7 @@ struct node_entry {
 	struct hpsb_host *host;		/* Host this node is attached to */
 	nodeid_t nodeid;		/* NodeID */
 	struct bus_options busopt;	/* Bus Options */
-	int needs_probe;
+	bool needs_probe;
 	unsigned int generation;	/* Synced with hpsb generation */
 
 	/* The following is read from the config rom */
diff --git a/drivers/ieee1394/sbp2.c b/drivers/ieee1394/sbp2.c
index 9cbf3154d243..1d6ad3435537 100644
--- a/drivers/ieee1394/sbp2.c
+++ b/drivers/ieee1394/sbp2.c
@@ -731,15 +731,26 @@ static int sbp2_update(struct unit_directory *ud)
 {
 	struct sbp2_lu *lu = ud->device.driver_data;
 
-	if (sbp2_reconnect_device(lu)) {
-		/* Reconnect has failed. Perhaps we didn't reconnect fast
-		 * enough. Try a regular login, but first log out just in
-		 * case of any weirdness. */
+	if (sbp2_reconnect_device(lu) != 0) {
+		/*
+		 * Reconnect failed.  If another bus reset happened,
+		 * let nodemgr proceed and call sbp2_update again later
+		 * (or sbp2_remove if this node went away).
+		 */
+		if (!hpsb_node_entry_valid(lu->ne))
+			return 0;
+		/*
+		 * Or the target rejected the reconnect because we weren't
+		 * fast enough.  Try a regular login, but first log out
+		 * just in case of any weirdness.
+		 */
 		sbp2_logout_device(lu);
 
-		if (sbp2_login_device(lu)) {
-			/* Login failed too, just fail, and the backend
-			 * will call our sbp2_remove for us */
+		if (sbp2_login_device(lu) != 0) {
+			if (!hpsb_node_entry_valid(lu->ne))
+				return 0;
+
+			/* Maybe another initiator won the login. */
 			SBP2_ERR("Failed to reconnect to sbp2 device!");
 			return -EBUSY;
 		}
diff --git a/drivers/infiniband/core/cma.c b/drivers/infiniband/core/cma.c
index e980ff3335db..d951896ff7fc 100644
--- a/drivers/infiniband/core/cma.c
+++ b/drivers/infiniband/core/cma.c
@@ -155,9 +155,7 @@ struct cma_multicast {
 	} multicast;
 	struct list_head	list;
 	void			*context;
-	struct sockaddr		addr;
-	u8			pad[sizeof(struct sockaddr_in6) -
-				    sizeof(struct sockaddr)];
+	struct sockaddr_storage	addr;
 };
 
 struct cma_work {
@@ -786,8 +784,8 @@ static void cma_cancel_operation(struct rdma_id_private *id_priv,
 		cma_cancel_route(id_priv);
 		break;
 	case CMA_LISTEN:
-		if (cma_any_addr(&id_priv->id.route.addr.src_addr) &&
-		    !id_priv->cma_dev)
+		if (cma_any_addr((struct sockaddr *) &id_priv->id.route.addr.src_addr)
+				&& !id_priv->cma_dev)
 			cma_cancel_listens(id_priv);
 		break;
 	default:
@@ -1026,7 +1024,7 @@ static struct rdma_id_private *cma_new_conn_id(struct rdma_cm_id *listen_id,
 		rt->path_rec[1] = *ib_event->param.req_rcvd.alternate_path;
 
 	ib_addr_set_dgid(&rt->addr.dev_addr, &rt->path_rec[0].dgid);
-	ret = rdma_translate_ip(&id->route.addr.src_addr,
+	ret = rdma_translate_ip((struct sockaddr *) &id->route.addr.src_addr,
 				&id->route.addr.dev_addr);
 	if (ret)
 		goto destroy_id;
@@ -1064,7 +1062,7 @@ static struct rdma_id_private *cma_new_udp_id(struct rdma_cm_id *listen_id,
 	cma_save_net_info(&id->route.addr, &listen_id->route.addr,
 			  ip_ver, port, src, dst);
 
-	ret = rdma_translate_ip(&id->route.addr.src_addr,
+	ret = rdma_translate_ip((struct sockaddr *) &id->route.addr.src_addr,
 				&id->route.addr.dev_addr);
 	if (ret)
 		goto err;
@@ -1377,7 +1375,7 @@ static int cma_ib_listen(struct rdma_id_private *id_priv)
 	if (IS_ERR(id_priv->cm_id.ib))
 		return PTR_ERR(id_priv->cm_id.ib);
 
-	addr = &id_priv->id.route.addr.src_addr;
+	addr = (struct sockaddr *) &id_priv->id.route.addr.src_addr;
 	svc_id = cma_get_service_id(id_priv->id.ps, addr);
 	if (cma_any_addr(addr))
 		ret = ib_cm_listen(id_priv->cm_id.ib, svc_id, 0, NULL);
@@ -1443,7 +1441,7 @@ static void cma_listen_on_dev(struct rdma_id_private *id_priv,
 
 	dev_id_priv->state = CMA_ADDR_BOUND;
 	memcpy(&id->route.addr.src_addr, &id_priv->id.route.addr.src_addr,
-	       ip_addr_size(&id_priv->id.route.addr.src_addr));
+	       ip_addr_size((struct sockaddr *) &id_priv->id.route.addr.src_addr));
 
 	cma_attach_to_dev(dev_id_priv, cma_dev);
 	list_add_tail(&dev_id_priv->listen_list, &id_priv->listen_list);
@@ -1563,13 +1561,14 @@ static int cma_query_ib_route(struct rdma_id_private *id_priv, int timeout_ms,
 	path_rec.pkey = cpu_to_be16(ib_addr_get_pkey(&addr->dev_addr));
 	path_rec.numb_path = 1;
 	path_rec.reversible = 1;
-	path_rec.service_id = cma_get_service_id(id_priv->id.ps, &addr->dst_addr);
+	path_rec.service_id = cma_get_service_id(id_priv->id.ps,
+							(struct sockaddr *) &addr->dst_addr);
 
 	comp_mask = IB_SA_PATH_REC_DGID | IB_SA_PATH_REC_SGID |
 		    IB_SA_PATH_REC_PKEY | IB_SA_PATH_REC_NUMB_PATH |
 		    IB_SA_PATH_REC_REVERSIBLE | IB_SA_PATH_REC_SERVICE_ID;
 
-	if (addr->src_addr.sa_family == AF_INET) {
+	if (addr->src_addr.ss_family == AF_INET) {
 		path_rec.qos_class = cpu_to_be16((u16) id_priv->tos);
 		comp_mask |= IB_SA_PATH_REC_QOS_CLASS;
 	} else {
@@ -1848,7 +1847,7 @@ static int cma_resolve_loopback(struct rdma_id_private *id_priv)
 	ib_addr_get_sgid(&id_priv->id.route.addr.dev_addr, &gid);
 	ib_addr_set_dgid(&id_priv->id.route.addr.dev_addr, &gid);
 
-	if (cma_zero_addr(&id_priv->id.route.addr.src_addr)) {
+	if (cma_zero_addr((struct sockaddr *) &id_priv->id.route.addr.src_addr)) {
 		src_in = (struct sockaddr_in *)&id_priv->id.route.addr.src_addr;
 		dst_in = (struct sockaddr_in *)&id_priv->id.route.addr.dst_addr;
 		src_in->sin_family = dst_in->sin_family;
@@ -1897,7 +1896,7 @@ int rdma_resolve_addr(struct rdma_cm_id *id, struct sockaddr *src_addr,
 	if (cma_any_addr(dst_addr))
 		ret = cma_resolve_loopback(id_priv);
 	else
-		ret = rdma_resolve_ip(&addr_client, &id->route.addr.src_addr,
+		ret = rdma_resolve_ip(&addr_client, (struct sockaddr *) &id->route.addr.src_addr,
 				      dst_addr, &id->route.addr.dev_addr,
 				      timeout_ms, addr_handler, id_priv);
 	if (ret)
@@ -2021,11 +2020,11 @@ static int cma_use_port(struct idr *ps, struct rdma_id_private *id_priv)
 	 * We don't support binding to any address if anyone is bound to
 	 * a specific address on the same port.
 	 */
-	if (cma_any_addr(&id_priv->id.route.addr.src_addr))
+	if (cma_any_addr((struct sockaddr *) &id_priv->id.route.addr.src_addr))
 		return -EADDRNOTAVAIL;
 
 	hlist_for_each_entry(cur_id, node, &bind_list->owners, node) {
-		if (cma_any_addr(&cur_id->id.route.addr.src_addr))
+		if (cma_any_addr((struct sockaddr *) &cur_id->id.route.addr.src_addr))
 			return -EADDRNOTAVAIL;
 
 		cur_sin = (struct sockaddr_in *) &cur_id->id.route.addr.src_addr;
@@ -2060,7 +2059,7 @@ static int cma_get_port(struct rdma_id_private *id_priv)
 	}
 
 	mutex_lock(&lock);
-	if (cma_any_port(&id_priv->id.route.addr.src_addr))
+	if (cma_any_port((struct sockaddr *) &id_priv->id.route.addr.src_addr))
 		ret = cma_alloc_any_port(ps, id_priv);
 	else
 		ret = cma_use_port(ps, id_priv);
@@ -2232,7 +2231,7 @@ static int cma_resolve_ib_udp(struct rdma_id_private *id_priv,
 
 	req.path = route->path_rec;
 	req.service_id = cma_get_service_id(id_priv->id.ps,
-					    &route->addr.dst_addr);
+					    (struct sockaddr *) &route->addr.dst_addr);
 	req.timeout_ms = 1 << (CMA_CM_RESPONSE_TIMEOUT - 8);
 	req.max_cm_retries = CMA_MAX_CM_RETRIES;
 
@@ -2283,7 +2282,7 @@ static int cma_connect_ib(struct rdma_id_private *id_priv,
 		req.alternate_path = &route->path_rec[1];
 
 	req.service_id = cma_get_service_id(id_priv->id.ps,
-					    &route->addr.dst_addr);
+					    (struct sockaddr *) &route->addr.dst_addr);
 	req.qp_num = id_priv->qp_num;
 	req.qp_type = IB_QPT_RC;
 	req.starting_psn = id_priv->seq_num;
@@ -2667,7 +2666,7 @@ static int cma_join_ib_multicast(struct rdma_id_private *id_priv,
 	if (ret)
 		return ret;
 
-	cma_set_mgid(id_priv, &mc->addr, &rec.mgid);
+	cma_set_mgid(id_priv, (struct sockaddr *) &mc->addr, &rec.mgid);
 	if (id_priv->id.ps == RDMA_PS_UDP)
 		rec.qkey = cpu_to_be32(RDMA_UDP_QKEY);
 	ib_addr_get_sgid(dev_addr, &rec.port_gid);
diff --git a/drivers/infiniband/core/mad_rmpp.c b/drivers/infiniband/core/mad_rmpp.c
index d0ef7d61c037..3af2b84cd838 100644
--- a/drivers/infiniband/core/mad_rmpp.c
+++ b/drivers/infiniband/core/mad_rmpp.c
@@ -133,7 +133,7 @@ static void ack_recv(struct mad_rmpp_recv *rmpp_recv,
 	msg = ib_create_send_mad(&rmpp_recv->agent->agent, recv_wc->wc->src_qp,
 				 recv_wc->wc->pkey_index, 1, hdr_len,
 				 0, GFP_KERNEL);
-	if (!msg)
+	if (IS_ERR(msg))
 		return;
 
 	format_ack(msg, (struct ib_rmpp_mad *) recv_wc->recv_buf.mad, rmpp_recv);
diff --git a/drivers/infiniband/core/ucm.c b/drivers/infiniband/core/ucm.c
index 9494005d1c9a..e603736682bf 100644
--- a/drivers/infiniband/core/ucm.c
+++ b/drivers/infiniband/core/ucm.c
@@ -43,7 +43,6 @@
 #include <linux/cdev.h>
 #include <linux/idr.h>
 #include <linux/mutex.h>
-#include <linux/smp_lock.h>
 
 #include <asm/uaccess.h>
 
@@ -1154,11 +1153,18 @@ static unsigned int ib_ucm_poll(struct file *filp,
 	return mask;
 }
 
+/*
+ * ib_ucm_open() does not need the BKL:
+ *
+ *  - no global state is referred to;
+ *  - there is no ioctl method to race against;
+ *  - no further module initialization is required for open to work
+ *    after the device is registered.
+ */
 static int ib_ucm_open(struct inode *inode, struct file *filp)
 {
 	struct ib_ucm_file *file;
 
-	cycle_kernel_lock();
 	file = kmalloc(sizeof(*file), GFP_KERNEL);
 	if (!file)
 		return -ENOMEM;
diff --git a/drivers/infiniband/core/ucma.c b/drivers/infiniband/core/ucma.c
index 195f97302fe5..3ddacf39b7ba 100644
--- a/drivers/infiniband/core/ucma.c
+++ b/drivers/infiniband/core/ucma.c
@@ -38,7 +38,6 @@
 #include <linux/in.h>
 #include <linux/in6.h>
 #include <linux/miscdevice.h>
-#include <linux/smp_lock.h>
 
 #include <rdma/rdma_user_cm.h>
 #include <rdma/ib_marshall.h>
@@ -82,9 +81,7 @@ struct ucma_multicast {
 
 	u64			uid;
 	struct list_head	list;
-	struct sockaddr		addr;
-	u8			pad[sizeof(struct sockaddr_in6) -
-				    sizeof(struct sockaddr)];
+	struct sockaddr_storage	addr;
 };
 
 struct ucma_event {
@@ -604,11 +601,11 @@ static ssize_t ucma_query_route(struct ucma_file *file,
 		return PTR_ERR(ctx);
 
 	memset(&resp, 0, sizeof resp);
-	addr = &ctx->cm_id->route.addr.src_addr;
+	addr = (struct sockaddr *) &ctx->cm_id->route.addr.src_addr;
 	memcpy(&resp.src_addr, addr, addr->sa_family == AF_INET ?
 				     sizeof(struct sockaddr_in) :
 				     sizeof(struct sockaddr_in6));
-	addr = &ctx->cm_id->route.addr.dst_addr;
+	addr = (struct sockaddr *) &ctx->cm_id->route.addr.dst_addr;
 	memcpy(&resp.dst_addr, addr, addr->sa_family == AF_INET ?
 				     sizeof(struct sockaddr_in) :
 				     sizeof(struct sockaddr_in6));
@@ -914,7 +911,7 @@ static ssize_t ucma_join_multicast(struct ucma_file *file,
 
 	mc->uid = cmd.uid;
 	memcpy(&mc->addr, &cmd.addr, sizeof cmd.addr);
-	ret = rdma_join_multicast(ctx->cm_id, &mc->addr, mc);
+	ret = rdma_join_multicast(ctx->cm_id, (struct sockaddr *) &mc->addr, mc);
 	if (ret)
 		goto err2;
 
@@ -930,7 +927,7 @@ static ssize_t ucma_join_multicast(struct ucma_file *file,
 	return 0;
 
 err3:
-	rdma_leave_multicast(ctx->cm_id, &mc->addr);
+	rdma_leave_multicast(ctx->cm_id, (struct sockaddr *) &mc->addr);
 	ucma_cleanup_mc_events(mc);
 err2:
 	mutex_lock(&mut);
@@ -976,7 +973,7 @@ static ssize_t ucma_leave_multicast(struct ucma_file *file,
 		goto out;
 	}
 
-	rdma_leave_multicast(mc->ctx->cm_id, &mc->addr);
+	rdma_leave_multicast(mc->ctx->cm_id, (struct sockaddr *) &mc->addr);
 	mutex_lock(&mc->ctx->file->mut);
 	ucma_cleanup_mc_events(mc);
 	list_del(&mc->list);
@@ -1149,6 +1146,14 @@ static unsigned int ucma_poll(struct file *filp, struct poll_table_struct *wait)
 	return mask;
 }
 
+/*
+ * ucma_open() does not need the BKL:
+ *
+ *  - no global state is referred to;
+ *  - there is no ioctl method to race against;
+ *  - no further module initialization is required for open to work
+ *    after the device is registered.
+ */
 static int ucma_open(struct inode *inode, struct file *filp)
 {
 	struct ucma_file *file;
@@ -1157,7 +1162,6 @@ static int ucma_open(struct inode *inode, struct file *filp)
 	if (!file)
 		return -ENOMEM;
 
-	lock_kernel();
 	INIT_LIST_HEAD(&file->event_list);
 	INIT_LIST_HEAD(&file->ctx_list);
 	init_waitqueue_head(&file->poll_wait);
@@ -1165,7 +1169,6 @@ static int ucma_open(struct inode *inode, struct file *filp)
 
 	filp->private_data = file;
 	file->filp = filp;
-	unlock_kernel();
 	return 0;
 }
 
diff --git a/drivers/infiniband/hw/cxgb3/cxio_hal.c b/drivers/infiniband/hw/cxgb3/cxio_hal.c
index f6d5747153a5..4dcf08b3fd83 100644
--- a/drivers/infiniband/hw/cxgb3/cxio_hal.c
+++ b/drivers/infiniband/hw/cxgb3/cxio_hal.c
@@ -725,9 +725,9 @@ static int __cxio_tpt_op(struct cxio_rdev *rdev_p, u32 reset_tpt_entry,
 				V_TPT_STAG_TYPE(type) | V_TPT_PDID(pdid));
 		BUG_ON(page_size >= 28);
 		tpt.flags_pagesize_qpid = cpu_to_be32(V_TPT_PERM(perm) |
-				F_TPT_MW_BIND_ENABLE |
-				V_TPT_ADDR_TYPE((zbva ? TPT_ZBTO : TPT_VATO)) |
-				V_TPT_PAGE_SIZE(page_size));
+			((perm & TPT_MW_BIND) ? F_TPT_MW_BIND_ENABLE : 0) |
+			V_TPT_ADDR_TYPE((zbva ? TPT_ZBTO : TPT_VATO)) |
+			V_TPT_PAGE_SIZE(page_size));
 		tpt.rsvd_pbl_addr = reset_tpt_entry ? 0 :
 				    cpu_to_be32(V_TPT_PBL_ADDR(PBL_OFF(rdev_p, pbl_addr)>>3));
 		tpt.len = cpu_to_be32(len);
diff --git a/drivers/infiniband/hw/cxgb3/iwch_provider.c b/drivers/infiniband/hw/cxgb3/iwch_provider.c
index b89640aa6e10..eb778bfd6f66 100644
--- a/drivers/infiniband/hw/cxgb3/iwch_provider.c
+++ b/drivers/infiniband/hw/cxgb3/iwch_provider.c
@@ -1187,28 +1187,6 @@ static ssize_t show_rev(struct device *dev, struct device_attribute *attr,
 	return sprintf(buf, "%d\n", iwch_dev->rdev.t3cdev_p->type);
 }
 
-static int fw_supports_fastreg(struct iwch_dev *iwch_dev)
-{
-	struct ethtool_drvinfo info;
-	struct net_device *lldev = iwch_dev->rdev.t3cdev_p->lldev;
-	char *cp, *next;
-	unsigned fw_maj, fw_min;
-
-	rtnl_lock();
-	lldev->ethtool_ops->get_drvinfo(lldev, &info);
-	rtnl_unlock();
-
-	next = info.fw_version+1;
-	cp = strsep(&next, ".");
-	sscanf(cp, "%i", &fw_maj);
-	cp = strsep(&next, ".");
-	sscanf(cp, "%i", &fw_min);
-
-	PDBG("%s maj %u min %u\n", __func__, fw_maj, fw_min);
-
-	return fw_maj > 6 || (fw_maj == 6 && fw_min > 0);
-}
-
 static ssize_t show_fw_ver(struct device *dev, struct device_attribute *attr, char *buf)
 {
 	struct iwch_dev *iwch_dev = container_of(dev, struct iwch_dev,
@@ -1325,12 +1303,12 @@ int iwch_register_device(struct iwch_dev *dev)
 	memset(&dev->ibdev.node_guid, 0, sizeof(dev->ibdev.node_guid));
 	memcpy(&dev->ibdev.node_guid, dev->rdev.t3cdev_p->lldev->dev_addr, 6);
 	dev->ibdev.owner = THIS_MODULE;
-	dev->device_cap_flags = IB_DEVICE_LOCAL_DMA_LKEY | IB_DEVICE_MEM_WINDOW;
+	dev->device_cap_flags = IB_DEVICE_LOCAL_DMA_LKEY |
+				IB_DEVICE_MEM_WINDOW |
+				IB_DEVICE_MEM_MGT_EXTENSIONS;
 
 	/* cxgb3 supports STag 0. */
 	dev->ibdev.local_dma_lkey = 0;
-	if (fw_supports_fastreg(dev))
-		dev->device_cap_flags |= IB_DEVICE_MEM_MGT_EXTENSIONS;
 
 	dev->ibdev.uverbs_cmd_mask =
 	    (1ull << IB_USER_VERBS_CMD_GET_CONTEXT) |
diff --git a/drivers/infiniband/hw/cxgb3/iwch_provider.h b/drivers/infiniband/hw/cxgb3/iwch_provider.h
index f5ceca05c435..a237d49bdcc9 100644
--- a/drivers/infiniband/hw/cxgb3/iwch_provider.h
+++ b/drivers/infiniband/hw/cxgb3/iwch_provider.h
@@ -293,9 +293,16 @@ static inline u32 iwch_ib_to_tpt_access(int acc)
 	return (acc & IB_ACCESS_REMOTE_WRITE ? TPT_REMOTE_WRITE : 0) |
 	       (acc & IB_ACCESS_REMOTE_READ ? TPT_REMOTE_READ : 0) |
 	       (acc & IB_ACCESS_LOCAL_WRITE ? TPT_LOCAL_WRITE : 0) |
+	       (acc & IB_ACCESS_MW_BIND ? TPT_MW_BIND : 0) |
 	       TPT_LOCAL_READ;
 }
 
+static inline u32 iwch_ib_to_tpt_bind_access(int acc)
+{
+	return (acc & IB_ACCESS_REMOTE_WRITE ? TPT_REMOTE_WRITE : 0) |
+	       (acc & IB_ACCESS_REMOTE_READ ? TPT_REMOTE_READ : 0);
+}
+
 enum iwch_mmid_state {
 	IWCH_STAG_STATE_VALID,
 	IWCH_STAG_STATE_INVALID
diff --git a/drivers/infiniband/hw/cxgb3/iwch_qp.c b/drivers/infiniband/hw/cxgb3/iwch_qp.c
index 9a3be3a9d5dc..3e4585c2318a 100644
--- a/drivers/infiniband/hw/cxgb3/iwch_qp.c
+++ b/drivers/infiniband/hw/cxgb3/iwch_qp.c
@@ -565,7 +565,7 @@ int iwch_bind_mw(struct ib_qp *qp,
 	wqe->bind.type = TPT_VATO;
 
 	/* TBD: check perms */
-	wqe->bind.perms = iwch_ib_to_tpt_access(mw_bind->mw_access_flags);
+	wqe->bind.perms = iwch_ib_to_tpt_bind_access(mw_bind->mw_access_flags);
 	wqe->bind.mr_stag = cpu_to_be32(mw_bind->mr->lkey);
 	wqe->bind.mw_stag = cpu_to_be32(mw->rkey);
 	wqe->bind.mw_len = cpu_to_be32(mw_bind->length);
@@ -879,20 +879,13 @@ static int rdma_init(struct iwch_dev *rhp, struct iwch_qp *qhp,
 		(qhp->attr.mpa_attr.xmit_marker_enabled << 1) |
 		(qhp->attr.mpa_attr.crc_enabled << 2);
 
-	/*
-	 * XXX - The IWCM doesn't quite handle getting these
-	 * attrs set before going into RTS.  For now, just turn
-	 * them on always...
-	 */
-#if 0
-	init_attr.qpcaps = qhp->attr.enableRdmaRead |
-		(qhp->attr.enableRdmaWrite << 1) |
-		(qhp->attr.enableBind << 2) |
-		(qhp->attr.enable_stag0_fastreg << 3) |
-		(qhp->attr.enable_stag0_fastreg << 4);
-#else
-	init_attr.qpcaps = 0x1f;
-#endif
+	init_attr.qpcaps = uP_RI_QP_RDMA_READ_ENABLE |
+			   uP_RI_QP_RDMA_WRITE_ENABLE |
+			   uP_RI_QP_BIND_ENABLE;
+	if (!qhp->ibqp.uobject)
+		init_attr.qpcaps |= uP_RI_QP_STAG0_ENABLE |
+				    uP_RI_QP_FAST_REGISTER_ENABLE;
+
 	init_attr.tcp_emss = qhp->ep->emss;
 	init_attr.ord = qhp->attr.max_ord;
 	init_attr.ird = qhp->attr.max_ird;
@@ -900,8 +893,6 @@ static int rdma_init(struct iwch_dev *rhp, struct iwch_qp *qhp,
 	init_attr.qp_dma_size = (1UL << qhp->wq.size_log2);
 	init_attr.rqe_count = iwch_rqes_posted(qhp);
 	init_attr.flags = qhp->attr.mpa_attr.initiator ? MPA_INITIATOR : 0;
-	if (!qhp->ibqp.uobject)
-		init_attr.flags |= PRIV_QP;
 	if (peer2peer) {
 		init_attr.rtr_type = RTR_READ;
 		if (init_attr.ord == 0 && qhp->attr.mpa_attr.initiator)
diff --git a/drivers/infiniband/hw/ehca/ehca_classes.h b/drivers/infiniband/hw/ehca/ehca_classes.h
index 0b0618edd645..1ab919f836a8 100644
--- a/drivers/infiniband/hw/ehca/ehca_classes.h
+++ b/drivers/infiniband/hw/ehca/ehca_classes.h
@@ -156,6 +156,14 @@ struct ehca_mod_qp_parm {
 
 #define EHCA_MOD_QP_PARM_MAX 4
 
+#define QMAP_IDX_MASK 0xFFFFULL
+
+/* struct for tracking if cqes have been reported to the application */
+struct ehca_qmap_entry {
+	u16 app_wr_id;
+	u16 reported;
+};
+
 struct ehca_qp {
 	union {
 		struct ib_qp ib_qp;
@@ -165,6 +173,7 @@ struct ehca_qp {
 	enum ehca_ext_qp_type ext_type;
 	enum ib_qp_state state;
 	struct ipz_queue ipz_squeue;
+	struct ehca_qmap_entry *sq_map;
 	struct ipz_queue ipz_rqueue;
 	struct h_galpas galpas;
 	u32 qkey;
diff --git a/drivers/infiniband/hw/ehca/ehca_qes.h b/drivers/infiniband/hw/ehca/ehca_qes.h
index 818803057ebf..5d28e3e98a20 100644
--- a/drivers/infiniband/hw/ehca/ehca_qes.h
+++ b/drivers/infiniband/hw/ehca/ehca_qes.h
@@ -213,6 +213,7 @@ struct ehca_wqe {
 #define WC_STATUS_ERROR_BIT 0x80000000
 #define WC_STATUS_REMOTE_ERROR_FLAGS 0x0000F800
 #define WC_STATUS_PURGE_BIT 0x10
+#define WC_SEND_RECEIVE_BIT 0x80
 
 struct ehca_cqe {
 	u64 work_request_id;
diff --git a/drivers/infiniband/hw/ehca/ehca_qp.c b/drivers/infiniband/hw/ehca/ehca_qp.c
index ea13efddf175..b6bcee036734 100644
--- a/drivers/infiniband/hw/ehca/ehca_qp.c
+++ b/drivers/infiniband/hw/ehca/ehca_qp.c
@@ -412,6 +412,7 @@ static struct ehca_qp *internal_create_qp(
 	struct ehca_shca *shca = container_of(pd->device, struct ehca_shca,
 					      ib_device);
 	struct ib_ucontext *context = NULL;
+	u32 nr_qes;
 	u64 h_ret;
 	int is_llqp = 0, has_srq = 0;
 	int qp_type, max_send_sge, max_recv_sge, ret;
@@ -715,6 +716,15 @@ static struct ehca_qp *internal_create_qp(
 				 "and pages ret=%i", ret);
 			goto create_qp_exit2;
 		}
+		nr_qes = my_qp->ipz_squeue.queue_length /
+			 my_qp->ipz_squeue.qe_size;
+		my_qp->sq_map = vmalloc(nr_qes *
+					sizeof(struct ehca_qmap_entry));
+		if (!my_qp->sq_map) {
+			ehca_err(pd->device, "Couldn't allocate squeue "
+				 "map ret=%i", ret);
+			goto create_qp_exit3;
+		}
 	}
 
 	if (HAS_RQ(my_qp)) {
@@ -724,7 +734,7 @@ static struct ehca_qp *internal_create_qp(
 		if (ret) {
 			ehca_err(pd->device, "Couldn't initialize rqueue "
 				 "and pages ret=%i", ret);
-			goto create_qp_exit3;
+			goto create_qp_exit4;
 		}
 	}
 
@@ -770,7 +780,7 @@ static struct ehca_qp *internal_create_qp(
 			if (!my_qp->mod_qp_parm) {
 				ehca_err(pd->device,
 					 "Could not alloc mod_qp_parm");
-				goto create_qp_exit4;
+				goto create_qp_exit5;
 			}
 		}
 	}
@@ -780,7 +790,7 @@ static struct ehca_qp *internal_create_qp(
 		h_ret = ehca_define_sqp(shca, my_qp, init_attr);
 		if (h_ret != H_SUCCESS) {
 			ret = ehca2ib_return_code(h_ret);
-			goto create_qp_exit5;
+			goto create_qp_exit6;
 		}
 	}
 
@@ -789,7 +799,7 @@ static struct ehca_qp *internal_create_qp(
 		if (ret) {
 			ehca_err(pd->device,
 				 "Couldn't assign qp to send_cq ret=%i", ret);
-			goto create_qp_exit5;
+			goto create_qp_exit6;
 		}
 	}
 
@@ -815,22 +825,26 @@ static struct ehca_qp *internal_create_qp(
 		if (ib_copy_to_udata(udata, &resp, sizeof resp)) {
 			ehca_err(pd->device, "Copy to udata failed");
 			ret = -EINVAL;
-			goto create_qp_exit6;
+			goto create_qp_exit7;
 		}
 	}
 
 	return my_qp;
 
-create_qp_exit6:
+create_qp_exit7:
 	ehca_cq_unassign_qp(my_qp->send_cq, my_qp->real_qp_num);
 
-create_qp_exit5:
+create_qp_exit6:
 	kfree(my_qp->mod_qp_parm);
 
-create_qp_exit4:
+create_qp_exit5:
 	if (HAS_RQ(my_qp))
 		ipz_queue_dtor(my_pd, &my_qp->ipz_rqueue);
 
+create_qp_exit4:
+	if (HAS_SQ(my_qp))
+		vfree(my_qp->sq_map);
+
 create_qp_exit3:
 	if (HAS_SQ(my_qp))
 		ipz_queue_dtor(my_pd, &my_qp->ipz_squeue);
@@ -1534,8 +1548,6 @@ static int internal_modify_qp(struct ib_qp *ibqp,
 	if (attr_mask & IB_QP_QKEY)
 		my_qp->qkey = attr->qkey;
 
-	my_qp->state = qp_new_state;
-
 modify_qp_exit2:
 	if (squeue_locked) { /* this means: sqe -> rts */
 		spin_unlock_irqrestore(&my_qp->spinlock_s, flags);
@@ -1551,6 +1563,8 @@ modify_qp_exit1:
 int ehca_modify_qp(struct ib_qp *ibqp, struct ib_qp_attr *attr, int attr_mask,
 		   struct ib_udata *udata)
 {
+	int ret = 0;
+
 	struct ehca_shca *shca = container_of(ibqp->device, struct ehca_shca,
 					      ib_device);
 	struct ehca_qp *my_qp = container_of(ibqp, struct ehca_qp, ib_qp);
@@ -1597,12 +1611,18 @@ int ehca_modify_qp(struct ib_qp *ibqp, struct ib_qp_attr *attr, int attr_mask,
 				 attr->qp_state, my_qp->init_attr.port_num,
 				 ibqp->qp_type);
 			spin_unlock_irqrestore(&sport->mod_sqp_lock, flags);
-			return 0;
+			goto out;
 		}
 		spin_unlock_irqrestore(&sport->mod_sqp_lock, flags);
 	}
 
-	return internal_modify_qp(ibqp, attr, attr_mask, 0);
+	ret = internal_modify_qp(ibqp, attr, attr_mask, 0);
+
+out:
+	if ((ret == 0) && (attr_mask & IB_QP_STATE))
+		my_qp->state = attr->qp_state;
+
+	return ret;
 }
 
 void ehca_recover_sqp(struct ib_qp *sqp)
@@ -1973,8 +1993,10 @@ static int internal_destroy_qp(struct ib_device *dev, struct ehca_qp *my_qp,
 
 	if (HAS_RQ(my_qp))
 		ipz_queue_dtor(my_pd, &my_qp->ipz_rqueue);
-	if (HAS_SQ(my_qp))
+	if (HAS_SQ(my_qp)) {
 		ipz_queue_dtor(my_pd, &my_qp->ipz_squeue);
+		vfree(my_qp->sq_map);
+	}
 	kmem_cache_free(qp_cache, my_qp);
 	atomic_dec(&shca->num_qps);
 	return 0;
diff --git a/drivers/infiniband/hw/ehca/ehca_reqs.c b/drivers/infiniband/hw/ehca/ehca_reqs.c
index dd9bc68f1c7b..4426d82fe798 100644
--- a/drivers/infiniband/hw/ehca/ehca_reqs.c
+++ b/drivers/infiniband/hw/ehca/ehca_reqs.c
@@ -42,7 +42,7 @@
  */
 
 
-#include <asm-powerpc/system.h>
+#include <asm/system.h>
 #include "ehca_classes.h"
 #include "ehca_tools.h"
 #include "ehca_qes.h"
@@ -139,6 +139,7 @@ static void trace_send_wr_ud(const struct ib_send_wr *send_wr)
 static inline int ehca_write_swqe(struct ehca_qp *qp,
 				  struct ehca_wqe *wqe_p,
 				  const struct ib_send_wr *send_wr,
+				  u32 sq_map_idx,
 				  int hidden)
 {
 	u32 idx;
@@ -157,7 +158,11 @@ static inline int ehca_write_swqe(struct ehca_qp *qp,
 	/* clear wqe header until sglist */
 	memset(wqe_p, 0, offsetof(struct ehca_wqe, u.ud_av.sg_list));
 
-	wqe_p->work_request_id = send_wr->wr_id;
+	wqe_p->work_request_id = send_wr->wr_id & ~QMAP_IDX_MASK;
+	wqe_p->work_request_id |= sq_map_idx & QMAP_IDX_MASK;
+
+	qp->sq_map[sq_map_idx].app_wr_id = send_wr->wr_id & QMAP_IDX_MASK;
+	qp->sq_map[sq_map_idx].reported = 0;
 
 	switch (send_wr->opcode) {
 	case IB_WR_SEND:
@@ -381,6 +386,7 @@ static inline int post_one_send(struct ehca_qp *my_qp,
 {
 	struct ehca_wqe *wqe_p;
 	int ret;
+	u32 sq_map_idx;
 	u64 start_offset = my_qp->ipz_squeue.current_q_offset;
 
 	/* get pointer next to free WQE */
@@ -393,8 +399,15 @@ static inline int post_one_send(struct ehca_qp *my_qp,
 			 "qp_num=%x", my_qp->ib_qp.qp_num);
 		return -ENOMEM;
 	}
+
+	/*
+	 * Get the index of the WQE in the send queue. The same index is used
+	 * for writing into the sq_map.
+	 */
+	sq_map_idx = start_offset / my_qp->ipz_squeue.qe_size;
+
 	/* write a SEND WQE into the QUEUE */
-	ret = ehca_write_swqe(my_qp, wqe_p, cur_send_wr, hidden);
+	ret = ehca_write_swqe(my_qp, wqe_p, cur_send_wr, sq_map_idx, hidden);
 	/*
 	 * if something failed,
 	 * reset the free entry pointer to the start value
@@ -589,7 +602,7 @@ static inline int ehca_poll_cq_one(struct ib_cq *cq, struct ib_wc *wc)
 	struct ehca_qp *my_qp;
 	int cqe_count = 0, is_error;
 
-poll_cq_one_read_cqe:
+repoll:
 	cqe = (struct ehca_cqe *)
 		ipz_qeit_get_inc_valid(&my_cq->ipz_queue);
 	if (!cqe) {
@@ -617,7 +630,7 @@ poll_cq_one_read_cqe:
 			ehca_dmp(cqe, 64, "cq_num=%x qp_num=%x",
 				 my_cq->cq_number, cqe->local_qp_number);
 			/* ignore this purged cqe */
-			goto poll_cq_one_read_cqe;
+			goto repoll;
 		}
 		spin_lock_irqsave(&qp->spinlock_s, flags);
 		purgeflag = qp->sqerr_purgeflag;
@@ -636,7 +649,7 @@ poll_cq_one_read_cqe:
 			 * that caused sqe and turn off purge flag
 			 */
 			qp->sqerr_purgeflag = 0;
-			goto poll_cq_one_read_cqe;
+			goto repoll;
 		}
 	}
 
@@ -654,8 +667,34 @@ poll_cq_one_read_cqe:
 			 my_cq, my_cq->cq_number);
 	}
 
-	/* we got a completion! */
-	wc->wr_id = cqe->work_request_id;
+	read_lock(&ehca_qp_idr_lock);
+	my_qp = idr_find(&ehca_qp_idr, cqe->qp_token);
+	read_unlock(&ehca_qp_idr_lock);
+	if (!my_qp)
+		goto repoll;
+	wc->qp = &my_qp->ib_qp;
+
+	if (!(cqe->w_completion_flags & WC_SEND_RECEIVE_BIT)) {
+		struct ehca_qmap_entry *qmap_entry;
+		/*
+		 * We got a send completion and need to restore the original
+		 * wr_id.
+		 */
+		qmap_entry = &my_qp->sq_map[cqe->work_request_id &
+					    QMAP_IDX_MASK];
+
+		if (qmap_entry->reported) {
+			ehca_warn(cq->device, "Double cqe on qp_num=%#x",
+				  my_qp->real_qp_num);
+			/* found a double cqe, discard it and read next one */
+			goto repoll;
+		}
+		wc->wr_id = cqe->work_request_id & ~QMAP_IDX_MASK;
+		wc->wr_id |= qmap_entry->app_wr_id;
+		qmap_entry->reported = 1;
+	} else
+		/* We got a receive completion. */
+		wc->wr_id = cqe->work_request_id;
 
 	/* eval ib_wc_opcode */
 	wc->opcode = ib_wc_opcode[cqe->optype]-1;
@@ -667,7 +706,7 @@ poll_cq_one_read_cqe:
 		ehca_dmp(cqe, 64, "ehca_cq=%p cq_num=%x",
 			 my_cq, my_cq->cq_number);
 		/* update also queue adder to throw away this entry!!! */
-		goto poll_cq_one_exit0;
+		goto repoll;
 	}
 
 	/* eval ib_wc_status */
@@ -678,11 +717,6 @@ poll_cq_one_read_cqe:
 	} else
 		wc->status = IB_WC_SUCCESS;
 
-	read_lock(&ehca_qp_idr_lock);
-	my_qp = idr_find(&ehca_qp_idr, cqe->qp_token);
-	wc->qp = &my_qp->ib_qp;
-	read_unlock(&ehca_qp_idr_lock);
-
 	wc->byte_len = cqe->nr_bytes_transferred;
 	wc->pkey_index = cqe->pkey_index;
 	wc->slid = cqe->rlid;
diff --git a/drivers/infiniband/hw/ehca/ehca_tools.h b/drivers/infiniband/hw/ehca/ehca_tools.h
index ec950bf8c479..21f7d06f14ad 100644
--- a/drivers/infiniband/hw/ehca/ehca_tools.h
+++ b/drivers/infiniband/hw/ehca/ehca_tools.h
@@ -54,7 +54,6 @@
 #include <linux/module.h>
 #include <linux/moduleparam.h>
 #include <linux/vmalloc.h>
-#include <linux/version.h>
 #include <linux/notifier.h>
 #include <linux/cpu.h>
 #include <linux/device.h>
diff --git a/drivers/infiniband/hw/ipath/ipath_driver.c b/drivers/infiniband/hw/ipath/ipath_driver.c
index daad09a45910..ad0aab60b051 100644
--- a/drivers/infiniband/hw/ipath/ipath_driver.c
+++ b/drivers/infiniband/hw/ipath/ipath_driver.c
@@ -1259,7 +1259,7 @@ reloop:
 			 */
 			ipath_cdbg(ERRPKT, "Error Pkt, but no eflags! egrbuf"
 				  " %x, len %x hdrq+%x rhf: %Lx\n",
-				  etail, tlen, l,
+				  etail, tlen, l, (unsigned long long)
 				  le64_to_cpu(*(__le64 *) rhf_addr));
 			if (ipath_debug & __IPATH_ERRPKTDBG) {
 				u32 j, *d, dw = rsize-2;
@@ -1457,7 +1457,8 @@ static void ipath_reset_availshadow(struct ipath_devdata *dd)
 			0xaaaaaaaaaaaaaaaaULL); /* All BUSY bits in qword */
 		if (oldval != dd->ipath_pioavailshadow[i])
 			ipath_dbg("shadow[%d] was %Lx, now %lx\n",
-				i, oldval, dd->ipath_pioavailshadow[i]);
+				i, (unsigned long long) oldval,
+				dd->ipath_pioavailshadow[i]);
 	}
 	spin_unlock_irqrestore(&ipath_pioavail_lock, flags);
 }
diff --git a/drivers/infiniband/hw/ipath/ipath_fs.c b/drivers/infiniband/hw/ipath/ipath_fs.c
index 23faba9d21eb..8bb5170b4e41 100644
--- a/drivers/infiniband/hw/ipath/ipath_fs.c
+++ b/drivers/infiniband/hw/ipath/ipath_fs.c
@@ -31,7 +31,6 @@
  * SOFTWARE.
  */
 
-#include <linux/version.h>
 #include <linux/module.h>
 #include <linux/fs.h>
 #include <linux/mount.h>
diff --git a/drivers/infiniband/hw/ipath/ipath_iba7220.c b/drivers/infiniband/hw/ipath/ipath_iba7220.c
index fb70712ac85c..9839e20119bc 100644
--- a/drivers/infiniband/hw/ipath/ipath_iba7220.c
+++ b/drivers/infiniband/hw/ipath/ipath_iba7220.c
@@ -528,7 +528,7 @@ static const struct ipath_cregs ipath_7220_cregs = {
 
 static char int_type[16] = "auto";
 module_param_string(interrupt_type, int_type, sizeof(int_type), 0444);
-MODULE_PARM_DESC(int_type, " interrupt_type=auto|force_msi|force_intx\n");
+MODULE_PARM_DESC(int_type, " interrupt_type=auto|force_msi|force_intx");
 
 /* packet rate matching delay; chip has support */
 static u8 rate_to_delay[2][2] = {
@@ -1032,7 +1032,7 @@ static int ipath_7220_bringup_serdes(struct ipath_devdata *dd)
 	ipath_cdbg(VERBOSE, "done: xgxs=%llx from %llx\n",
 		   (unsigned long long)
 		   ipath_read_kreg64(dd, dd->ipath_kregs->kr_xgxsconfig),
-		   prev_val);
+		   (unsigned long long) prev_val);
 
 	guid = be64_to_cpu(dd->ipath_guid);
 
@@ -1042,7 +1042,8 @@ static int ipath_7220_bringup_serdes(struct ipath_devdata *dd)
 		ipath_dbg("No GUID for heartbeat, faking %llx\n",
 			(unsigned long long)guid);
 	} else
-		ipath_cdbg(VERBOSE, "Wrote %llX to HRTBT_GUID\n", guid);
+		ipath_cdbg(VERBOSE, "Wrote %llX to HRTBT_GUID\n",
+			(unsigned long long) guid);
 	ipath_write_kreg(dd, dd->ipath_kregs->kr_hrtbt_guid, guid);
 	return ret;
 }
@@ -1719,7 +1720,7 @@ static void ipath_7220_put_tid(struct ipath_devdata *dd, u64 __iomem *tidptr,
 				 "not 2KB aligned!\n", pa);
 			return;
 		}
-		if (pa >= (1UL << IBA7220_TID_SZ_SHIFT)) {
+		if (chippa >= (1UL << IBA7220_TID_SZ_SHIFT)) {
 			ipath_dev_err(dd,
 				      "BUG: Physical page address 0x%lx "
 				      "larger than supported\n", pa);
@@ -2505,7 +2506,7 @@ done:
 	if (dd->ipath_flags & IPATH_IB_AUTONEG_INPROG) {
 		ipath_dbg("Did not get to DDR INIT (%x) after %Lu msecs\n",
 			ipath_ib_state(dd, dd->ipath_lastibcstat),
-			jiffies_to_msecs(jiffies)-startms);
+			(unsigned long long) jiffies_to_msecs(jiffies)-startms);
 		dd->ipath_flags &= ~IPATH_IB_AUTONEG_INPROG;
 		if (dd->ipath_autoneg_tries == IPATH_AUTONEG_TRIES) {
 			dd->ipath_flags |= IPATH_IB_AUTONEG_FAILED;
diff --git a/drivers/infiniband/hw/ipath/ipath_intr.c b/drivers/infiniband/hw/ipath/ipath_intr.c
index 26900b3b7a4e..6c21b4b5ec71 100644
--- a/drivers/infiniband/hw/ipath/ipath_intr.c
+++ b/drivers/infiniband/hw/ipath/ipath_intr.c
@@ -356,9 +356,10 @@ static void handle_e_ibstatuschanged(struct ipath_devdata *dd,
 			dd->ipath_cregs->cr_iblinkerrrecovcnt);
 		if (linkrecov != dd->ipath_lastlinkrecov) {
 			ipath_dbg("IB linkrecov up %Lx (%s %s) recov %Lu\n",
-				ibcs, ib_linkstate(dd, ibcs),
+				(unsigned long long) ibcs,
+				ib_linkstate(dd, ibcs),
 				ipath_ibcstatus_str[ltstate],
-				linkrecov);
+				(unsigned long long) linkrecov);
 			/* and no more until active again */
 			dd->ipath_lastlinkrecov = 0;
 			ipath_set_linkstate(dd, IPATH_IB_LINKDOWN);
@@ -1118,9 +1119,11 @@ irqreturn_t ipath_intr(int irq, void *data)
 	if (unlikely(istat & ~dd->ipath_i_bitsextant))
 		ipath_dev_err(dd,
 			      "interrupt with unknown interrupts %Lx set\n",
+			      (unsigned long long)
 			      istat & ~dd->ipath_i_bitsextant);
 	else if (istat & ~INFINIPATH_I_ERROR) /* errors do own printing */
-		ipath_cdbg(VERBOSE, "intr stat=0x%Lx\n", istat);
+		ipath_cdbg(VERBOSE, "intr stat=0x%Lx\n",
+			(unsigned long long) istat);
 
 	if (istat & INFINIPATH_I_ERROR) {
 		ipath_stats.sps_errints++;
@@ -1128,7 +1131,8 @@ irqreturn_t ipath_intr(int irq, void *data)
 					  dd->ipath_kregs->kr_errorstatus);
 		if (!estat)
 			dev_info(&dd->pcidev->dev, "error interrupt (%Lx), "
-				 "but no error bits set!\n", istat);
+				 "but no error bits set!\n",
+				 (unsigned long long) istat);
 		else if (estat == -1LL)
 			/*
 			 * should we try clearing all, or hope next read
diff --git a/drivers/infiniband/hw/ipath/ipath_sdma.c b/drivers/infiniband/hw/ipath/ipath_sdma.c
index eaba03273e4f..284c9bca517e 100644
--- a/drivers/infiniband/hw/ipath/ipath_sdma.c
+++ b/drivers/infiniband/hw/ipath/ipath_sdma.c
@@ -698,7 +698,7 @@ retry:
 
 	addr = dma_map_single(&dd->pcidev->dev, tx->txreq.map_addr,
 			      tx->map_len, DMA_TO_DEVICE);
-	if (dma_mapping_error(addr)) {
+	if (dma_mapping_error(&dd->pcidev->dev, addr)) {
 		ret = -EIO;
 		goto unlock;
 	}
diff --git a/drivers/infiniband/hw/ipath/ipath_ud.c b/drivers/infiniband/hw/ipath/ipath_ud.c
index 36aa242c487c..729446f56aab 100644
--- a/drivers/infiniband/hw/ipath/ipath_ud.c
+++ b/drivers/infiniband/hw/ipath/ipath_ud.c
@@ -267,6 +267,7 @@ int ipath_make_ud_req(struct ipath_qp *qp)
 	u16 lrh0;
 	u16 lid;
 	int ret = 0;
+	int next_cur;
 
 	spin_lock_irqsave(&qp->s_lock, flags);
 
@@ -290,8 +291,9 @@ int ipath_make_ud_req(struct ipath_qp *qp)
 		goto bail;
 
 	wqe = get_swqe_ptr(qp, qp->s_cur);
-	if (++qp->s_cur >= qp->s_size)
-		qp->s_cur = 0;
+	next_cur = qp->s_cur + 1;
+	if (next_cur >= qp->s_size)
+		next_cur = 0;
 
 	/* Construct the header. */
 	ah_attr = &to_iah(wqe->wr.wr.ud.ah)->attr;
@@ -315,6 +317,7 @@ int ipath_make_ud_req(struct ipath_qp *qp)
 				qp->s_flags |= IPATH_S_WAIT_DMA;
 				goto bail;
 			}
+			qp->s_cur = next_cur;
 			spin_unlock_irqrestore(&qp->s_lock, flags);
 			ipath_ud_loopback(qp, wqe);
 			spin_lock_irqsave(&qp->s_lock, flags);
@@ -323,6 +326,7 @@ int ipath_make_ud_req(struct ipath_qp *qp)
 		}
 	}
 
+	qp->s_cur = next_cur;
 	extra_bytes = -wqe->length & 3;
 	nwords = (wqe->length + extra_bytes) >> 2;
 
diff --git a/drivers/infiniband/hw/ipath/ipath_user_sdma.c b/drivers/infiniband/hw/ipath/ipath_user_sdma.c
index 86e016916cd1..82d9a0b5ca2f 100644
--- a/drivers/infiniband/hw/ipath/ipath_user_sdma.c
+++ b/drivers/infiniband/hw/ipath/ipath_user_sdma.c
@@ -206,7 +206,7 @@ static int ipath_user_sdma_coalesce(const struct ipath_devdata *dd,
 
 	dma_addr = dma_map_page(&dd->pcidev->dev, page, 0, len,
 				DMA_TO_DEVICE);
-	if (dma_mapping_error(dma_addr)) {
+	if (dma_mapping_error(&dd->pcidev->dev, dma_addr)) {
 		ret = -ENOMEM;
 		goto free_unmap;
 	}
@@ -301,7 +301,7 @@ static int ipath_user_sdma_pin_pages(const struct ipath_devdata *dd,
 				     pages[j], 0, flen, DMA_TO_DEVICE);
 		unsigned long fofs = addr & ~PAGE_MASK;
 
-		if (dma_mapping_error(dma_addr)) {
+		if (dma_mapping_error(&dd->pcidev->dev, dma_addr)) {
 			ret = -ENOMEM;
 			goto done;
 		}
@@ -508,7 +508,7 @@ static int ipath_user_sdma_queue_pkts(const struct ipath_devdata *dd,
 		if (page) {
 			dma_addr = dma_map_page(&dd->pcidev->dev,
 						page, 0, len, DMA_TO_DEVICE);
-			if (dma_mapping_error(dma_addr)) {
+			if (dma_mapping_error(&dd->pcidev->dev, dma_addr)) {
 				ret = -ENOMEM;
 				goto free_pbc;
 			}
diff --git a/drivers/infiniband/hw/ipath/ipath_verbs.c b/drivers/infiniband/hw/ipath/ipath_verbs.c
index 55c718828826..b766e40e9ebf 100644
--- a/drivers/infiniband/hw/ipath/ipath_verbs.c
+++ b/drivers/infiniband/hw/ipath/ipath_verbs.c
@@ -1021,7 +1021,7 @@ static void sdma_complete(void *cookie, int status)
 	struct ipath_verbs_txreq *tx = cookie;
 	struct ipath_qp *qp = tx->qp;
 	struct ipath_ibdev *dev = to_idev(qp->ibqp.device);
-	unsigned int flags;
+	unsigned long flags;
 	enum ib_wc_status ibs = status == IPATH_SDMA_TXREQ_S_OK ?
 		IB_WC_SUCCESS : IB_WC_WR_FLUSH_ERR;
 
@@ -1051,7 +1051,7 @@ static void sdma_complete(void *cookie, int status)
 
 static void decrement_dma_busy(struct ipath_qp *qp)
 {
-	unsigned int flags;
+	unsigned long flags;
 
 	if (atomic_dec_and_test(&qp->s_dma_busy)) {
 		spin_lock_irqsave(&qp->s_lock, flags);
@@ -1221,7 +1221,7 @@ static int ipath_verbs_send_pio(struct ipath_qp *qp,
 	unsigned flush_wc;
 	u32 control;
 	int ret;
-	unsigned int flags;
+	unsigned long flags;
 
 	piobuf = ipath_getpiobuf(dd, plen, NULL);
 	if (unlikely(piobuf == NULL)) {
diff --git a/drivers/infiniband/hw/mlx4/cq.c b/drivers/infiniband/hw/mlx4/cq.c
index 0b191a4842ce..d0866a3636e2 100644
--- a/drivers/infiniband/hw/mlx4/cq.c
+++ b/drivers/infiniband/hw/mlx4/cq.c
@@ -1,5 +1,6 @@
 /*
  * Copyright (c) 2007 Cisco Systems, Inc. All rights reserved.
+ * Copyright (c) 2007, 2008 Mellanox Technologies. All rights reserved.
  *
  * This software is available to you under a choice of one of two
  * licenses.  You may choose to be licensed under the terms of the GNU
@@ -514,17 +515,17 @@ static void mlx4_ib_handle_error_cqe(struct mlx4_err_cqe *cqe,
 	wc->vendor_err = cqe->vendor_err_syndrome;
 }
 
-static int mlx4_ib_ipoib_csum_ok(__be32 status, __be16 checksum)
+static int mlx4_ib_ipoib_csum_ok(__be16 status, __be16 checksum)
 {
-	return ((status & cpu_to_be32(MLX4_CQE_IPOIB_STATUS_IPV4	|
-				      MLX4_CQE_IPOIB_STATUS_IPV4F	|
-				      MLX4_CQE_IPOIB_STATUS_IPV4OPT	|
-				      MLX4_CQE_IPOIB_STATUS_IPV6	|
-				      MLX4_CQE_IPOIB_STATUS_IPOK)) ==
-		cpu_to_be32(MLX4_CQE_IPOIB_STATUS_IPV4	|
-			    MLX4_CQE_IPOIB_STATUS_IPOK))		&&
-		(status & cpu_to_be32(MLX4_CQE_IPOIB_STATUS_UDP	|
-				      MLX4_CQE_IPOIB_STATUS_TCP))	&&
+	return ((status & cpu_to_be16(MLX4_CQE_STATUS_IPV4      |
+				      MLX4_CQE_STATUS_IPV4F     |
+				      MLX4_CQE_STATUS_IPV4OPT   |
+				      MLX4_CQE_STATUS_IPV6      |
+				      MLX4_CQE_STATUS_IPOK)) ==
+		cpu_to_be16(MLX4_CQE_STATUS_IPV4        |
+			    MLX4_CQE_STATUS_IPOK))              &&
+		(status & cpu_to_be16(MLX4_CQE_STATUS_UDP       |
+				      MLX4_CQE_STATUS_TCP))     &&
 		checksum == cpu_to_be16(0xffff);
 }
 
@@ -581,17 +582,17 @@ repoll:
 	}
 
 	if (!*cur_qp ||
-	    (be32_to_cpu(cqe->my_qpn) & 0xffffff) != (*cur_qp)->mqp.qpn) {
+	    (be32_to_cpu(cqe->vlan_my_qpn) & MLX4_CQE_QPN_MASK) != (*cur_qp)->mqp.qpn) {
 		/*
 		 * We do not have to take the QP table lock here,
 		 * because CQs will be locked while QPs are removed
 		 * from the table.
 		 */
 		mqp = __mlx4_qp_lookup(to_mdev(cq->ibcq.device)->dev,
-				       be32_to_cpu(cqe->my_qpn));
+				       be32_to_cpu(cqe->vlan_my_qpn));
 		if (unlikely(!mqp)) {
 			printk(KERN_WARNING "CQ %06x with entry for unknown QPN %06x\n",
-			       cq->mcq.cqn, be32_to_cpu(cqe->my_qpn) & 0xffffff);
+			       cq->mcq.cqn, be32_to_cpu(cqe->vlan_my_qpn) & MLX4_CQE_QPN_MASK);
 			return -EINVAL;
 		}
 
@@ -691,14 +692,13 @@ repoll:
 		}
 
 		wc->slid	   = be16_to_cpu(cqe->rlid);
-		wc->sl		   = cqe->sl >> 4;
+		wc->sl		   = be16_to_cpu(cqe->sl_vid >> 12);
 		g_mlpath_rqpn	   = be32_to_cpu(cqe->g_mlpath_rqpn);
 		wc->src_qp	   = g_mlpath_rqpn & 0xffffff;
 		wc->dlid_path_bits = (g_mlpath_rqpn >> 24) & 0x7f;
 		wc->wc_flags	  |= g_mlpath_rqpn & 0x80000000 ? IB_WC_GRH : 0;
 		wc->pkey_index     = be32_to_cpu(cqe->immed_rss_invalid) & 0x7f;
-		wc->csum_ok	   = mlx4_ib_ipoib_csum_ok(cqe->ipoib_status,
-							   cqe->checksum);
+		wc->csum_ok	   = mlx4_ib_ipoib_csum_ok(cqe->status, cqe->checksum);
 	}
 
 	return 0;
@@ -766,7 +766,7 @@ void __mlx4_ib_cq_clean(struct mlx4_ib_cq *cq, u32 qpn, struct mlx4_ib_srq *srq)
 	 */
 	while ((int) --prod_index - (int) cq->mcq.cons_index >= 0) {
 		cqe = get_cqe(cq, prod_index & cq->ibcq.cqe);
-		if ((be32_to_cpu(cqe->my_qpn) & 0xffffff) == qpn) {
+		if ((be32_to_cpu(cqe->vlan_my_qpn) & MLX4_CQE_QPN_MASK) == qpn) {
 			if (srq && !(cqe->owner_sr_opcode & MLX4_CQE_IS_SEND_MASK))
 				mlx4_ib_free_srq_wqe(srq, be16_to_cpu(cqe->wqe_index));
 			++nfreed;
diff --git a/drivers/infiniband/hw/mlx4/main.c b/drivers/infiniband/hw/mlx4/main.c
index 38d6907ab521..a3c2851c0545 100644
--- a/drivers/infiniband/hw/mlx4/main.c
+++ b/drivers/infiniband/hw/mlx4/main.c
@@ -1,5 +1,6 @@
 /*
  * Copyright (c) 2006, 2007 Cisco Systems, Inc. All rights reserved.
+ * Copyright (c) 2007, 2008 Mellanox Technologies. All rights reserved.
  *
  * This software is available to you under a choice of one of two
  * licenses.  You may choose to be licensed under the terms of the GNU
diff --git a/drivers/infiniband/hw/mlx4/mlx4_ib.h b/drivers/infiniband/hw/mlx4/mlx4_ib.h
index d26a91317d4d..6e2b0dc21b61 100644
--- a/drivers/infiniband/hw/mlx4/mlx4_ib.h
+++ b/drivers/infiniband/hw/mlx4/mlx4_ib.h
@@ -1,5 +1,6 @@
 /*
  * Copyright (c) 2006, 2007 Cisco Systems.  All rights reserved.
+ * Copyright (c) 2007, 2008 Mellanox Technologies. All rights reserved.
  *
  * This software is available to you under a choice of one of two
  * licenses.  You may choose to be licensed under the terms of the GNU
diff --git a/drivers/infiniband/hw/mlx4/mr.c b/drivers/infiniband/hw/mlx4/mr.c
index db2086faa4ed..87f5c5a87b98 100644
--- a/drivers/infiniband/hw/mlx4/mr.c
+++ b/drivers/infiniband/hw/mlx4/mr.c
@@ -1,5 +1,6 @@
 /*
  * Copyright (c) 2007 Cisco Systems, Inc. All rights reserved.
+ * Copyright (c) 2007, 2008 Mellanox Technologies. All rights reserved.
  *
  * This software is available to you under a choice of one of two
  * licenses.  You may choose to be licensed under the terms of the GNU
@@ -203,6 +204,8 @@ struct ib_mr *mlx4_ib_alloc_fast_reg_mr(struct ib_pd *pd,
 	if (err)
 		goto err_mr;
 
+	mr->ibmr.rkey = mr->ibmr.lkey = mr->mmr.key;
+
 	return &mr->ibmr;
 
 err_mr:
diff --git a/drivers/infiniband/hw/mlx4/qp.c b/drivers/infiniband/hw/mlx4/qp.c
index 02a99bc4442e..f29dbb767e87 100644
--- a/drivers/infiniband/hw/mlx4/qp.c
+++ b/drivers/infiniband/hw/mlx4/qp.c
@@ -1,5 +1,6 @@
 /*
  * Copyright (c) 2007 Cisco Systems, Inc. All rights reserved.
+ * Copyright (c) 2007, 2008 Mellanox Technologies. All rights reserved.
  *
  * This software is available to you under a choice of one of two
  * licenses.  You may choose to be licensed under the terms of the GNU
@@ -901,7 +902,7 @@ static int __mlx4_ib_modify_qp(struct ib_qp *ibqp,
 			context->mtu_msgmax = (IB_MTU_4096 << 5) |
 					      ilog2(dev->dev->caps.max_gso_sz);
 		else
-			context->mtu_msgmax = (IB_MTU_4096 << 5) | 11;
+			context->mtu_msgmax = (IB_MTU_4096 << 5) | 12;
 	} else if (attr_mask & IB_QP_PATH_MTU) {
 		if (attr->path_mtu < IB_MTU_256 || attr->path_mtu > IB_MTU_4096) {
 			printk(KERN_ERR "path MTU (%u) is invalid\n",
diff --git a/drivers/infiniband/hw/mlx4/srq.c b/drivers/infiniband/hw/mlx4/srq.c
index 12d6bc6f8007..d42565258fb7 100644
--- a/drivers/infiniband/hw/mlx4/srq.c
+++ b/drivers/infiniband/hw/mlx4/srq.c
@@ -1,5 +1,6 @@
 /*
  * Copyright (c) 2007 Cisco Systems, Inc. All rights reserved.
+ * Copyright (c) 2007, 2008 Mellanox Technologies. All rights reserved.
  *
  * This software is available to you under a choice of one of two
  * licenses.  You may choose to be licensed under the terms of the GNU
diff --git a/drivers/infiniband/hw/mlx4/user.h b/drivers/infiniband/hw/mlx4/user.h
index e2d11be4525c..13beedeeef9f 100644
--- a/drivers/infiniband/hw/mlx4/user.h
+++ b/drivers/infiniband/hw/mlx4/user.h
@@ -1,5 +1,6 @@
 /*
  * Copyright (c) 2007 Cisco Systems, Inc. All rights reserved.
+ * Copyright (c) 2007, 2008 Mellanox Technologies. All rights reserved.
  *
  * This software is available to you under a choice of one of two
  * licenses.  You may choose to be licensed under the terms of the GNU
diff --git a/drivers/infiniband/hw/mthca/mthca_eq.c b/drivers/infiniband/hw/mthca/mthca_eq.c
index 4e36aa7cb3d2..cc6858f0b65b 100644
--- a/drivers/infiniband/hw/mthca/mthca_eq.c
+++ b/drivers/infiniband/hw/mthca/mthca_eq.c
@@ -780,7 +780,7 @@ int mthca_map_eq_icm(struct mthca_dev *dev, u64 icm_virt)
 		return -ENOMEM;
 	dev->eq_table.icm_dma  = pci_map_page(dev->pdev, dev->eq_table.icm_page, 0,
 					      PAGE_SIZE, PCI_DMA_BIDIRECTIONAL);
-	if (pci_dma_mapping_error(dev->eq_table.icm_dma)) {
+	if (pci_dma_mapping_error(dev->pdev, dev->eq_table.icm_dma)) {
 		__free_page(dev->eq_table.icm_page);
 		return -ENOMEM;
 	}
diff --git a/drivers/infiniband/hw/nes/nes.c b/drivers/infiniband/hw/nes/nes.c
index d2884e778098..b0cab64e5e3d 100644
--- a/drivers/infiniband/hw/nes/nes.c
+++ b/drivers/infiniband/hw/nes/nes.c
@@ -276,6 +276,7 @@ static void nes_cqp_rem_ref_callback(struct nes_device *nesdev, struct nes_cqp_r
 	}
 	nes_free_resource(nesadapter, nesadapter->allocated_qps, nesqp->hwqp.qp_id);
 
+	nesadapter->qp_table[nesqp->hwqp.qp_id-NES_FIRST_QPN] = NULL;
 	kfree(nesqp->allocated_buffer);
 
 }
@@ -289,7 +290,6 @@ void nes_rem_ref(struct ib_qp *ibqp)
 	struct nes_qp *nesqp;
 	struct nes_vnic *nesvnic = to_nesvnic(ibqp->device);
 	struct nes_device *nesdev = nesvnic->nesdev;
-	struct nes_adapter *nesadapter = nesdev->nesadapter;
 	struct nes_hw_cqp_wqe *cqp_wqe;
 	struct nes_cqp_request *cqp_request;
 	u32 opcode;
@@ -303,8 +303,6 @@ void nes_rem_ref(struct ib_qp *ibqp)
 	}
 
 	if (atomic_dec_and_test(&nesqp->refcount)) {
-		nesadapter->qp_table[nesqp->hwqp.qp_id-NES_FIRST_QPN] = NULL;
-
 		/* Destroy the QP */
 		cqp_request = nes_get_cqp_request(nesdev);
 		if (cqp_request == NULL) {
diff --git a/drivers/infiniband/hw/nes/nes.h b/drivers/infiniband/hw/nes/nes.h
index 39bd897b40c6..8eb7ae96974d 100644
--- a/drivers/infiniband/hw/nes/nes.h
+++ b/drivers/infiniband/hw/nes/nes.h
@@ -43,7 +43,6 @@
 #include <linux/dma-mapping.h>
 #include <linux/workqueue.h>
 #include <linux/slab.h>
-#include <linux/version.h>
 #include <asm/io.h>
 #include <linux/crc32c.h>
 
diff --git a/drivers/infiniband/hw/nes/nes_cm.c b/drivers/infiniband/hw/nes/nes_cm.c
index 6aa531d5276d..9f0b964b2c99 100644
--- a/drivers/infiniband/hw/nes/nes_cm.c
+++ b/drivers/infiniband/hw/nes/nes_cm.c
@@ -74,36 +74,59 @@ atomic_t cm_nodes_destroyed;
 atomic_t cm_accel_dropped_pkts;
 atomic_t cm_resets_recvd;
 
-static inline int mini_cm_accelerated(struct nes_cm_core *, struct nes_cm_node *);
+static inline int mini_cm_accelerated(struct nes_cm_core *,
+	struct nes_cm_node *);
 static struct nes_cm_listener *mini_cm_listen(struct nes_cm_core *,
-		struct nes_vnic *, struct nes_cm_info *);
-static int add_ref_cm_node(struct nes_cm_node *);
-static int rem_ref_cm_node(struct nes_cm_core *, struct nes_cm_node *);
+	struct nes_vnic *, struct nes_cm_info *);
 static int mini_cm_del_listen(struct nes_cm_core *, struct nes_cm_listener *);
-static struct sk_buff *form_cm_frame(struct sk_buff *, struct nes_cm_node *,
-				     void *, u32, void *, u32, u8);
-static struct sk_buff *get_free_pkt(struct nes_cm_node *cm_node);
-
 static struct nes_cm_node *mini_cm_connect(struct nes_cm_core *,
-					   struct nes_vnic *,
-					   struct ietf_mpa_frame *,
-					   struct nes_cm_info *);
+	struct nes_vnic *, u16, void *, struct nes_cm_info *);
+static int mini_cm_close(struct nes_cm_core *, struct nes_cm_node *);
 static int mini_cm_accept(struct nes_cm_core *, struct ietf_mpa_frame *,
-			  struct nes_cm_node *);
+	struct nes_cm_node *);
 static int mini_cm_reject(struct nes_cm_core *, struct ietf_mpa_frame *,
-			  struct nes_cm_node *);
-static int mini_cm_close(struct nes_cm_core *, struct nes_cm_node *);
-static int mini_cm_recv_pkt(struct nes_cm_core *, struct nes_vnic *,
-			    struct sk_buff *);
+	struct nes_cm_node *);
+static void mini_cm_recv_pkt(struct nes_cm_core *, struct nes_vnic *,
+	struct sk_buff *);
 static int mini_cm_dealloc_core(struct nes_cm_core *);
 static int mini_cm_get(struct nes_cm_core *);
 static int mini_cm_set(struct nes_cm_core *, u32, u32);
+
+static struct sk_buff *form_cm_frame(struct sk_buff *, struct nes_cm_node *,
+	void *, u32, void *, u32, u8);
+static struct sk_buff *get_free_pkt(struct nes_cm_node *cm_node);
+static int add_ref_cm_node(struct nes_cm_node *);
+static int rem_ref_cm_node(struct nes_cm_core *, struct nes_cm_node *);
+
 static int nes_cm_disconn_true(struct nes_qp *);
 static int nes_cm_post_event(struct nes_cm_event *event);
 static int nes_disconnect(struct nes_qp *nesqp, int abrupt);
 static void nes_disconnect_worker(struct work_struct *work);
-static int send_ack(struct nes_cm_node *cm_node);
+
+static int send_mpa_request(struct nes_cm_node *, struct sk_buff *);
+static int send_syn(struct nes_cm_node *, u32, struct sk_buff *);
+static int send_reset(struct nes_cm_node *, struct sk_buff *);
+static int send_ack(struct nes_cm_node *cm_node, struct sk_buff *skb);
 static int send_fin(struct nes_cm_node *cm_node, struct sk_buff *skb);
+static void process_packet(struct nes_cm_node *, struct sk_buff *,
+	struct nes_cm_core *);
+
+static void active_open_err(struct nes_cm_node *, struct sk_buff *, int);
+static void passive_open_err(struct nes_cm_node *, struct sk_buff *, int);
+static void cleanup_retrans_entry(struct nes_cm_node *);
+static void handle_rcv_mpa(struct nes_cm_node *, struct sk_buff *,
+	enum nes_cm_event_type);
+static void free_retrans_entry(struct nes_cm_node *cm_node);
+static int handle_tcp_options(struct nes_cm_node *cm_node, struct tcphdr *tcph,
+	struct sk_buff *skb, int optionsize, int passive);
+
+/* CM event handler functions */
+static void cm_event_connected(struct nes_cm_event *);
+static void cm_event_connect_error(struct nes_cm_event *);
+static void cm_event_reset(struct nes_cm_event *);
+static void cm_event_mpa_req(struct nes_cm_event *);
+
+static void print_core(struct nes_cm_core *core);
 
 /* External CM API Interface */
 /* instance of function pointers for client API */
@@ -158,11 +181,11 @@ static struct nes_cm_event *create_event(struct nes_cm_node *cm_node,
 	event->cm_info.loc_port = cm_node->loc_port;
 	event->cm_info.cm_id = cm_node->cm_id;
 
-	nes_debug(NES_DBG_CM, "Created event=%p, type=%u, dst_addr=%08x[%x],"
-			" src_addr=%08x[%x]\n",
-			event, type,
-			event->cm_info.loc_addr, event->cm_info.loc_port,
-			event->cm_info.rem_addr, event->cm_info.rem_port);
+	nes_debug(NES_DBG_CM, "cm_node=%p Created event=%p, type=%u, "
+		"dst_addr=%08x[%x], src_addr=%08x[%x]\n",
+		cm_node, event, type, event->cm_info.loc_addr,
+		event->cm_info.loc_port, event->cm_info.rem_addr,
+		event->cm_info.rem_port);
 
 	nes_cm_post_event(event);
 	return event;
@@ -172,14 +195,11 @@ static struct nes_cm_event *create_event(struct nes_cm_node *cm_node,
 /**
  * send_mpa_request
  */
-static int send_mpa_request(struct nes_cm_node *cm_node)
+static int send_mpa_request(struct nes_cm_node *cm_node, struct sk_buff *skb)
 {
-	struct sk_buff *skb;
 	int ret;
-
-	skb = get_free_pkt(cm_node);
 	if (!skb) {
-		nes_debug(NES_DBG_CM, "Failed to get a Free pkt\n");
+		nes_debug(NES_DBG_CM, "skb set to NULL\n");
 		return -1;
 	}
 
@@ -188,9 +208,8 @@ static int send_mpa_request(struct nes_cm_node *cm_node)
 			cm_node->mpa_frame_size, SET_ACK);
 
 	ret = schedule_nes_timer(cm_node, skb, NES_TIMER_TYPE_SEND, 1, 0);
-	if (ret < 0) {
+	if (ret < 0)
 		return ret;
-	}
 
 	return 0;
 }
@@ -229,46 +248,12 @@ static int parse_mpa(struct nes_cm_node *cm_node, u8 *buffer, u32 len)
 
 
 /**
- * handle_exception_pkt - process an exception packet.
- * We have been in a TSA state, and we have now received SW
- * TCP/IP traffic should be a FIN request or IP pkt with options
- */
-static int handle_exception_pkt(struct nes_cm_node *cm_node, struct sk_buff *skb)
-{
-	int ret = 0;
-	struct tcphdr *tcph = tcp_hdr(skb);
-
-	/* first check to see if this a FIN pkt */
-	if (tcph->fin) {
-		/* we need to ACK the FIN request */
-		send_ack(cm_node);
-
-		/* check which side we are (client/server) and set next state accordingly */
-		if (cm_node->tcp_cntxt.client)
-			cm_node->state = NES_CM_STATE_CLOSING;
-		else {
-			/* we are the server side */
-			cm_node->state = NES_CM_STATE_CLOSE_WAIT;
-			/* since this is a self contained CM we don't wait for */
-			/* an APP to close us, just send final FIN immediately */
-			ret = send_fin(cm_node, NULL);
-			cm_node->state = NES_CM_STATE_LAST_ACK;
-		}
-	} else {
-		ret = -EINVAL;
-	}
-
-	return ret;
-}
-
-
-/**
  * form_cm_frame - get a free packet and build empty frame Use
  * node info to build.
  */
-static struct sk_buff *form_cm_frame(struct sk_buff *skb, struct nes_cm_node *cm_node,
-				     void *options, u32 optionsize, void *data,
-				     u32 datasize, u8 flags)
+static struct sk_buff *form_cm_frame(struct sk_buff *skb,
+	struct nes_cm_node *cm_node, void *options, u32 optionsize,
+	void *data, u32 datasize, u8 flags)
 {
 	struct tcphdr *tcph;
 	struct iphdr *iph;
@@ -332,10 +317,12 @@ static struct sk_buff *form_cm_frame(struct sk_buff *skb, struct nes_cm_node *cm
 		cm_node->tcp_cntxt.loc_seq_num++;
 		tcph->syn = 1;
 	} else
-		cm_node->tcp_cntxt.loc_seq_num += datasize;	/* data (no headers) */
+		cm_node->tcp_cntxt.loc_seq_num += datasize;
 
-	if (flags & SET_FIN)
+	if (flags & SET_FIN) {
+		cm_node->tcp_cntxt.loc_seq_num++;
 		tcph->fin = 1;
+	}
 
 	if (flags & SET_RST)
 		tcph->rst = 1;
@@ -389,7 +376,7 @@ int schedule_nes_timer(struct nes_cm_node *cm_node, struct sk_buff *skb,
 		int close_when_complete)
 {
 	unsigned long  flags;
-	struct nes_cm_core *cm_core;
+	struct nes_cm_core *cm_core = cm_node->cm_core;
 	struct nes_timer_entry *new_send;
 	int ret = 0;
 	u32 was_timer_set;
@@ -411,7 +398,7 @@ int schedule_nes_timer(struct nes_cm_node *cm_node, struct sk_buff *skb,
 	new_send->close_when_complete = close_when_complete;
 
 	if (type == NES_TIMER_TYPE_CLOSE) {
-		new_send->timetosend += (HZ/2);	/* TODO: decide on the correct value here */
+		new_send->timetosend += (HZ/10);
 		spin_lock_irqsave(&cm_node->recv_list_lock, flags);
 		list_add_tail(&new_send->list, &cm_node->recv_list);
 		spin_unlock_irqrestore(&cm_node->recv_list_lock, flags);
@@ -420,36 +407,28 @@ int schedule_nes_timer(struct nes_cm_node *cm_node, struct sk_buff *skb,
 	if (type == NES_TIMER_TYPE_SEND) {
 		new_send->seq_num = ntohl(tcp_hdr(skb)->seq);
 		atomic_inc(&new_send->skb->users);
+		spin_lock_irqsave(&cm_node->retrans_list_lock, flags);
+		cm_node->send_entry = new_send;
+		add_ref_cm_node(cm_node);
+		spin_unlock_irqrestore(&cm_node->retrans_list_lock, flags);
+		new_send->timetosend = jiffies + NES_RETRY_TIMEOUT;
 
 		ret = nes_nic_cm_xmit(new_send->skb, cm_node->netdev);
 		if (ret != NETDEV_TX_OK) {
-			nes_debug(NES_DBG_CM, "Error sending packet %p (jiffies = %lu)\n",
-					new_send, jiffies);
+			nes_debug(NES_DBG_CM, "Error sending packet %p "
+				"(jiffies = %lu)\n", new_send, jiffies);
 			atomic_dec(&new_send->skb->users);
 			new_send->timetosend = jiffies;
 		} else {
 			cm_packets_sent++;
 			if (!send_retrans) {
+				cleanup_retrans_entry(cm_node);
 				if (close_when_complete)
-					rem_ref_cm_node(cm_node->cm_core, cm_node);
-				dev_kfree_skb_any(new_send->skb);
-				kfree(new_send);
+					rem_ref_cm_node(cm_core, cm_node);
 				return ret;
 			}
-			new_send->timetosend = jiffies + NES_RETRY_TIMEOUT;
 		}
-		spin_lock_irqsave(&cm_node->retrans_list_lock, flags);
-		list_add_tail(&new_send->list, &cm_node->retrans_list);
-		spin_unlock_irqrestore(&cm_node->retrans_list_lock, flags);
-	}
-	if (type == NES_TIMER_TYPE_RECV) {
-		new_send->seq_num = ntohl(tcp_hdr(skb)->seq);
-		new_send->timetosend = jiffies;
-		spin_lock_irqsave(&cm_node->recv_list_lock, flags);
-		list_add_tail(&new_send->list, &cm_node->recv_list);
-		spin_unlock_irqrestore(&cm_node->recv_list_lock, flags);
 	}
-	cm_core = cm_node->cm_core;
 
 	was_timer_set = timer_pending(&cm_core->tcp_timer);
 
@@ -476,23 +455,27 @@ static void nes_cm_timer_tick(unsigned long pass)
 	struct list_head *list_node, *list_node_temp;
 	struct nes_cm_core *cm_core = g_cm_core;
 	struct nes_qp *nesqp;
-	struct sk_buff *skb;
 	u32 settimer = 0;
 	int ret = NETDEV_TX_OK;
-	int    node_done;
+	enum nes_cm_node_state last_state;
 
 	spin_lock_irqsave(&cm_core->ht_lock, flags);
 
-	list_for_each_safe(list_node, list_core_temp, &cm_core->connected_nodes) {
+	list_for_each_safe(list_node, list_core_temp,
+		&cm_core->connected_nodes) {
 		cm_node = container_of(list_node, struct nes_cm_node, list);
 		add_ref_cm_node(cm_node);
 		spin_unlock_irqrestore(&cm_core->ht_lock, flags);
 		spin_lock_irqsave(&cm_node->recv_list_lock, flags);
-		list_for_each_safe(list_core, list_node_temp, &cm_node->recv_list) {
-			recv_entry = container_of(list_core, struct nes_timer_entry, list);
-			if ((time_after(recv_entry->timetosend, jiffies)) &&
-					(recv_entry->type == NES_TIMER_TYPE_CLOSE)) {
-				if (nexttimeout > recv_entry->timetosend || !settimer) {
+		list_for_each_safe(list_core, list_node_temp,
+			&cm_node->recv_list) {
+			recv_entry = container_of(list_core,
+				struct nes_timer_entry, list);
+			if (!recv_entry)
+				break;
+			if (time_after(recv_entry->timetosend, jiffies)) {
+				if (nexttimeout > recv_entry->timetosend ||
+					!settimer) {
 					nexttimeout = recv_entry->timetosend;
 					settimer = 1;
 				}
@@ -501,157 +484,143 @@ static void nes_cm_timer_tick(unsigned long pass)
 			list_del(&recv_entry->list);
 			cm_id = cm_node->cm_id;
 			spin_unlock_irqrestore(&cm_node->recv_list_lock, flags);
-			if (recv_entry->type == NES_TIMER_TYPE_CLOSE) {
-				nesqp = (struct nes_qp *)recv_entry->skb;
-				spin_lock_irqsave(&nesqp->lock, qplockflags);
-				if (nesqp->cm_id) {
-					nes_debug(NES_DBG_CM, "QP%u: cm_id = %p, refcount = %d: "
-							"****** HIT A NES_TIMER_TYPE_CLOSE"
-							" with something to do!!! ******\n",
-							nesqp->hwqp.qp_id, cm_id,
-							atomic_read(&nesqp->refcount));
-					nesqp->hw_tcp_state = NES_AEQE_TCP_STATE_CLOSED;
-					nesqp->last_aeq = NES_AEQE_AEID_RESET_SENT;
-					nesqp->ibqp_state = IB_QPS_ERR;
-					spin_unlock_irqrestore(&nesqp->lock, qplockflags);
-					nes_cm_disconn(nesqp);
-				} else {
-					spin_unlock_irqrestore(&nesqp->lock, qplockflags);
-					nes_debug(NES_DBG_CM, "QP%u: cm_id = %p, refcount = %d:"
-							" ****** HIT A NES_TIMER_TYPE_CLOSE"
-							" with nothing to do!!! ******\n",
-							nesqp->hwqp.qp_id, cm_id,
-							atomic_read(&nesqp->refcount));
-					nes_rem_ref(&nesqp->ibqp);
-				}
-				if (cm_id)
-					cm_id->rem_ref(cm_id);
+			nesqp = (struct nes_qp *)recv_entry->skb;
+			spin_lock_irqsave(&nesqp->lock, qplockflags);
+			if (nesqp->cm_id) {
+				nes_debug(NES_DBG_CM, "QP%u: cm_id = %p, "
+					"refcount = %d: HIT A "
+					"NES_TIMER_TYPE_CLOSE with something "
+					"to do!!!\n", nesqp->hwqp.qp_id, cm_id,
+					atomic_read(&nesqp->refcount));
+				nesqp->hw_tcp_state = NES_AEQE_TCP_STATE_CLOSED;
+				nesqp->last_aeq = NES_AEQE_AEID_RESET_SENT;
+				nesqp->ibqp_state = IB_QPS_ERR;
+				spin_unlock_irqrestore(&nesqp->lock,
+					qplockflags);
+				nes_cm_disconn(nesqp);
+			} else {
+				spin_unlock_irqrestore(&nesqp->lock,
+					qplockflags);
+				nes_debug(NES_DBG_CM, "QP%u: cm_id = %p, "
+					"refcount = %d: HIT A "
+					"NES_TIMER_TYPE_CLOSE with nothing "
+					"to do!!!\n", nesqp->hwqp.qp_id, cm_id,
+					atomic_read(&nesqp->refcount));
 			}
+			if (cm_id)
+				cm_id->rem_ref(cm_id);
+
 			kfree(recv_entry);
 			spin_lock_irqsave(&cm_node->recv_list_lock, flags);
 		}
 		spin_unlock_irqrestore(&cm_node->recv_list_lock, flags);
 
 		spin_lock_irqsave(&cm_node->retrans_list_lock, flags);
-		node_done = 0;
-		list_for_each_safe(list_core, list_node_temp, &cm_node->retrans_list) {
-			if (node_done) {
-				break;
-			}
-			send_entry = container_of(list_core, struct nes_timer_entry, list);
+		do {
+			send_entry = cm_node->send_entry;
+			if (!send_entry)
+				continue;
 			if (time_after(send_entry->timetosend, jiffies)) {
 				if (cm_node->state != NES_CM_STATE_TSA) {
-					if ((nexttimeout > send_entry->timetosend) || !settimer) {
-						nexttimeout = send_entry->timetosend;
+					if ((nexttimeout >
+						send_entry->timetosend) ||
+						!settimer) {
+						nexttimeout =
+							send_entry->timetosend;
 						settimer = 1;
+						continue;
 					}
-					node_done = 1;
-					continue;
 				} else {
-					list_del(&send_entry->list);
-					skb = send_entry->skb;
-					spin_unlock_irqrestore(&cm_node->retrans_list_lock, flags);
-					dev_kfree_skb_any(skb);
-					kfree(send_entry);
-					spin_lock_irqsave(&cm_node->retrans_list_lock, flags);
+					free_retrans_entry(cm_node);
 					continue;
 				}
 			}
-			if (send_entry->type == NES_TIMER_NODE_CLEANUP) {
-				list_del(&send_entry->list);
-				spin_unlock_irqrestore(&cm_node->retrans_list_lock, flags);
-				kfree(send_entry);
-				spin_lock_irqsave(&cm_node->retrans_list_lock, flags);
-				continue;
-			}
-			if ((send_entry->seq_num < cm_node->tcp_cntxt.rem_ack_num) ||
-					(cm_node->state == NES_CM_STATE_TSA) ||
-					(cm_node->state == NES_CM_STATE_CLOSED)) {
-				skb = send_entry->skb;
-				list_del(&send_entry->list);
-				spin_unlock_irqrestore(&cm_node->retrans_list_lock, flags);
-				kfree(send_entry);
-				dev_kfree_skb_any(skb);
-				spin_lock_irqsave(&cm_node->retrans_list_lock, flags);
+
+			if ((cm_node->state == NES_CM_STATE_TSA) ||
+				(cm_node->state == NES_CM_STATE_CLOSED)) {
+				free_retrans_entry(cm_node);
 				continue;
 			}
 
-			if (!send_entry->retranscount || !send_entry->retrycount) {
+			if (!send_entry->retranscount ||
+				!send_entry->retrycount) {
 				cm_packets_dropped++;
-				skb = send_entry->skb;
-				list_del(&send_entry->list);
-				spin_unlock_irqrestore(&cm_node->retrans_list_lock, flags);
-				dev_kfree_skb_any(skb);
-				kfree(send_entry);
-				if (cm_node->state == NES_CM_STATE_SYN_RCVD) {
-					/* this node never even generated an indication up to the cm */
+				last_state = cm_node->state;
+				cm_node->state = NES_CM_STATE_CLOSED;
+				free_retrans_entry(cm_node);
+				spin_unlock_irqrestore(
+					&cm_node->retrans_list_lock, flags);
+				if (last_state == NES_CM_STATE_SYN_RCVD)
 					rem_ref_cm_node(cm_core, cm_node);
-				} else {
-					cm_node->state = NES_CM_STATE_CLOSED;
-					create_event(cm_node, NES_CM_EVENT_ABORTED);
-				}
-				spin_lock_irqsave(&cm_node->retrans_list_lock, flags);
+				else
+					create_event(cm_node,
+						NES_CM_EVENT_ABORTED);
+				spin_lock_irqsave(&cm_node->retrans_list_lock,
+					flags);
 				continue;
 			}
-			/* this seems like the correct place, but leave send entry unprotected */
-			/* spin_unlock_irqrestore(&cm_node->retrans_list_lock, flags); */
 			atomic_inc(&send_entry->skb->users);
 			cm_packets_retrans++;
-			nes_debug(NES_DBG_CM, "Retransmitting send_entry %p for node %p,"
-					" jiffies = %lu, time to send =  %lu, retranscount = %u, "
-					"send_entry->seq_num = 0x%08X, cm_node->tcp_cntxt.rem_ack_num = 0x%08X\n",
-					send_entry, cm_node, jiffies, send_entry->timetosend, send_entry->retranscount,
-					send_entry->seq_num, cm_node->tcp_cntxt.rem_ack_num);
-
-			spin_unlock_irqrestore(&cm_node->retrans_list_lock, flags);
+			nes_debug(NES_DBG_CM, "Retransmitting send_entry %p "
+				"for node %p, jiffies = %lu, time to send = "
+				"%lu, retranscount = %u, send_entry->seq_num = "
+				"0x%08X, cm_node->tcp_cntxt.rem_ack_num = "
+				"0x%08X\n", send_entry, cm_node, jiffies,
+				send_entry->timetosend,
+				send_entry->retranscount,
+				send_entry->seq_num,
+				cm_node->tcp_cntxt.rem_ack_num);
+
+			spin_unlock_irqrestore(&cm_node->retrans_list_lock,
+				flags);
 			ret = nes_nic_cm_xmit(send_entry->skb, cm_node->netdev);
+			spin_lock_irqsave(&cm_node->retrans_list_lock, flags);
 			if (ret != NETDEV_TX_OK) {
+				nes_debug(NES_DBG_CM, "rexmit failed for "
+					"node=%p\n", cm_node);
 				cm_packets_bounced++;
 				atomic_dec(&send_entry->skb->users);
 				send_entry->retrycount--;
 				nexttimeout = jiffies + NES_SHORT_TIME;
 				settimer = 1;
-				node_done = 1;
-				spin_lock_irqsave(&cm_node->retrans_list_lock, flags);
 				continue;
 			} else {
 				cm_packets_sent++;
 			}
-			spin_lock_irqsave(&cm_node->retrans_list_lock, flags);
-			list_del(&send_entry->list);
-			nes_debug(NES_DBG_CM, "Packet Sent: retrans count = %u, retry count = %u.\n",
-					send_entry->retranscount, send_entry->retrycount);
+			nes_debug(NES_DBG_CM, "Packet Sent: retrans count = "
+				"%u, retry count = %u.\n",
+				send_entry->retranscount,
+				send_entry->retrycount);
 			if (send_entry->send_retrans) {
 				send_entry->retranscount--;
-				send_entry->timetosend = jiffies + NES_RETRY_TIMEOUT;
-				if (nexttimeout > send_entry->timetosend || !settimer) {
+				send_entry->timetosend = jiffies +
+					NES_RETRY_TIMEOUT;
+				if (nexttimeout > send_entry->timetosend ||
+					!settimer) {
 					nexttimeout = send_entry->timetosend;
 					settimer = 1;
 				}
-				list_add(&send_entry->list, &cm_node->retrans_list);
-				continue;
 			} else {
 				int close_when_complete;
-				skb = send_entry->skb;
-				close_when_complete = send_entry->close_when_complete;
-				spin_unlock_irqrestore(&cm_node->retrans_list_lock, flags);
-				if (close_when_complete) {
-					BUG_ON(atomic_read(&cm_node->ref_count) == 1);
-					rem_ref_cm_node(cm_core, cm_node);
-				}
-				dev_kfree_skb_any(skb);
-				kfree(send_entry);
-				spin_lock_irqsave(&cm_node->retrans_list_lock, flags);
-				continue;
+				close_when_complete =
+					send_entry->close_when_complete;
+				nes_debug(NES_DBG_CM, "cm_node=%p state=%d\n",
+					cm_node, cm_node->state);
+				free_retrans_entry(cm_node);
+				if (close_when_complete)
+					rem_ref_cm_node(cm_node->cm_core,
+						cm_node);
 			}
-		}
-		spin_unlock_irqrestore(&cm_node->retrans_list_lock, flags);
-
-		rem_ref_cm_node(cm_core, cm_node);
+		} while (0);
 
+		spin_unlock_irqrestore(&cm_node->retrans_list_lock, flags);
+		rem_ref_cm_node(cm_node->cm_core, cm_node);
 		spin_lock_irqsave(&cm_core->ht_lock, flags);
-		if (ret != NETDEV_TX_OK)
+		if (ret != NETDEV_TX_OK) {
+			nes_debug(NES_DBG_CM, "rexmit failed for cm_node=%p\n",
+				cm_node);
 			break;
+		}
 	}
 	spin_unlock_irqrestore(&cm_core->ht_lock, flags);
 
@@ -667,14 +636,14 @@ static void nes_cm_timer_tick(unsigned long pass)
 /**
  * send_syn
  */
-static int send_syn(struct nes_cm_node *cm_node, u32 sendack)
+static int send_syn(struct nes_cm_node *cm_node, u32 sendack,
+	struct sk_buff *skb)
 {
 	int ret;
 	int flags = SET_SYN;
-	struct sk_buff *skb;
 	char optionsbuffer[sizeof(struct option_mss) +
-			sizeof(struct option_windowscale) +
-			sizeof(struct option_base) + 1];
+		sizeof(struct option_windowscale) + sizeof(struct option_base) +
+		TCP_OPTIONS_PADDING];
 
 	int optionssize = 0;
 	/* Sending MSS option */
@@ -695,8 +664,7 @@ static int send_syn(struct nes_cm_node *cm_node, u32 sendack)
 	options->as_windowscale.shiftcount = cm_node->tcp_cntxt.rcv_wscale;
 	optionssize += sizeof(struct option_windowscale);
 
-	if (sendack && !(NES_DRV_OPT_SUPRESS_OPTION_BC & nes_drv_opt)
-			) {
+	if (sendack && !(NES_DRV_OPT_SUPRESS_OPTION_BC & nes_drv_opt)) {
 		options = (union all_known_options *)&optionsbuffer[optionssize];
 		options->as_base.optionnum = OPTION_NUMBER_WRITE0;
 		options->as_base.length = sizeof(struct option_base);
@@ -714,7 +682,8 @@ static int send_syn(struct nes_cm_node *cm_node, u32 sendack)
 	options->as_end = OPTION_NUMBER_END;
 	optionssize += 1;
 
-	skb = get_free_pkt(cm_node);
+	if (!skb)
+		skb = get_free_pkt(cm_node);
 	if (!skb) {
 		nes_debug(NES_DBG_CM, "Failed to get a Free pkt\n");
 		return -1;
@@ -733,18 +702,18 @@ static int send_syn(struct nes_cm_node *cm_node, u32 sendack)
 /**
  * send_reset
  */
-static int send_reset(struct nes_cm_node *cm_node)
+static int send_reset(struct nes_cm_node *cm_node, struct sk_buff *skb)
 {
 	int ret;
-	struct sk_buff *skb = get_free_pkt(cm_node);
 	int flags = SET_RST | SET_ACK;
 
+	if (!skb)
+		skb = get_free_pkt(cm_node);
 	if (!skb) {
 		nes_debug(NES_DBG_CM, "Failed to get a Free pkt\n");
 		return -1;
 	}
 
-	add_ref_cm_node(cm_node);
 	form_cm_frame(skb, cm_node, NULL, 0, NULL, 0, flags);
 	ret = schedule_nes_timer(cm_node, skb, NES_TIMER_TYPE_SEND, 0, 1);
 
@@ -755,10 +724,12 @@ static int send_reset(struct nes_cm_node *cm_node)
 /**
  * send_ack
  */
-static int send_ack(struct nes_cm_node *cm_node)
+static int send_ack(struct nes_cm_node *cm_node, struct sk_buff *skb)
 {
 	int ret;
-	struct sk_buff *skb = get_free_pkt(cm_node);
+
+	if (!skb)
+		skb = get_free_pkt(cm_node);
 
 	if (!skb) {
 		nes_debug(NES_DBG_CM, "Failed to get a Free pkt\n");
@@ -922,7 +893,8 @@ static int add_hte_node(struct nes_cm_core *cm_core, struct nes_cm_node *cm_node
 	if (!cm_node || !cm_core)
 		return -EINVAL;
 
-	nes_debug(NES_DBG_CM, "Adding Node to Active Connection HT\n");
+	nes_debug(NES_DBG_CM, "Adding Node %p to Active Connection HT\n",
+		cm_node);
 
 	/* first, make an index into our hash table */
 	hashkey = make_hashkey(cm_node->loc_port, cm_node->loc_addr,
@@ -946,10 +918,35 @@ static int add_hte_node(struct nes_cm_core *cm_core, struct nes_cm_node *cm_node
  * mini_cm_dec_refcnt_listen
  */
 static int mini_cm_dec_refcnt_listen(struct nes_cm_core *cm_core,
-		struct nes_cm_listener *listener, int free_hanging_nodes)
+	struct nes_cm_listener *listener, int free_hanging_nodes)
 {
 	int ret = 1;
 	unsigned long flags;
+	struct list_head *list_pos = NULL;
+	struct list_head *list_temp = NULL;
+	struct nes_cm_node *cm_node = NULL;
+
+	nes_debug(NES_DBG_CM, "attempting listener= %p free_nodes= %d, "
+		"refcnt=%d\n", listener, free_hanging_nodes,
+		atomic_read(&listener->ref_count));
+	/* free non-accelerated child nodes for this listener */
+	if (free_hanging_nodes) {
+		spin_lock_irqsave(&cm_core->ht_lock, flags);
+		list_for_each_safe(list_pos, list_temp,
+			&g_cm_core->connected_nodes) {
+			cm_node = container_of(list_pos, struct nes_cm_node,
+				list);
+			if ((cm_node->listener == listener) &&
+				(!cm_node->accelerated)) {
+				cleanup_retrans_entry(cm_node);
+				spin_unlock_irqrestore(&cm_core->ht_lock,
+					flags);
+				send_reset(cm_node, NULL);
+				spin_lock_irqsave(&cm_core->ht_lock, flags);
+			}
+		}
+		spin_unlock_irqrestore(&cm_core->ht_lock, flags);
+	}
 	spin_lock_irqsave(&cm_core->listen_list_lock, flags);
 	if (!atomic_dec_return(&listener->ref_count)) {
 		list_del(&listener->list);
@@ -1067,18 +1064,18 @@ static struct nes_cm_node *make_cm_node(struct nes_cm_core *cm_core,
 	cm_node->loc_port = cm_info->loc_port;
 	cm_node->rem_port = cm_info->rem_port;
 	cm_node->send_write0 = send_first;
-	nes_debug(NES_DBG_CM, "Make node addresses : loc = " NIPQUAD_FMT ":%x, rem = " NIPQUAD_FMT ":%x\n",
-		  HIPQUAD(cm_node->loc_addr), cm_node->loc_port,
-		  HIPQUAD(cm_node->rem_addr), cm_node->rem_port);
+	nes_debug(NES_DBG_CM, "Make node addresses : loc = " NIPQUAD_FMT
+			":%x, rem = " NIPQUAD_FMT ":%x\n",
+			HIPQUAD(cm_node->loc_addr), cm_node->loc_port,
+			HIPQUAD(cm_node->rem_addr), cm_node->rem_port);
 	cm_node->listener = listener;
 	cm_node->netdev = nesvnic->netdev;
 	cm_node->cm_id = cm_info->cm_id;
 	memcpy(cm_node->loc_mac, nesvnic->netdev->dev_addr, ETH_ALEN);
 
-	nes_debug(NES_DBG_CM, "listener=%p, cm_id=%p\n",
-			cm_node->listener, cm_node->cm_id);
+	nes_debug(NES_DBG_CM, "listener=%p, cm_id=%p\n", cm_node->listener,
+			cm_node->cm_id);
 
-	INIT_LIST_HEAD(&cm_node->retrans_list);
 	spin_lock_init(&cm_node->retrans_list_lock);
 	INIT_LIST_HEAD(&cm_node->recv_list);
 	spin_lock_init(&cm_node->recv_list_lock);
@@ -1142,10 +1139,9 @@ static int add_ref_cm_node(struct nes_cm_node *cm_node)
  * rem_ref_cm_node - destroy an instance of a cm node
  */
 static int rem_ref_cm_node(struct nes_cm_core *cm_core,
-		struct nes_cm_node *cm_node)
+	struct nes_cm_node *cm_node)
 {
 	unsigned long flags, qplockflags;
-	struct nes_timer_entry *send_entry;
 	struct nes_timer_entry *recv_entry;
 	struct iw_cm_id *cm_id;
 	struct list_head *list_core, *list_node_temp;
@@ -1169,48 +1165,33 @@ static int rem_ref_cm_node(struct nes_cm_core *cm_core,
 		atomic_dec(&cm_node->listener->pend_accepts_cnt);
 		BUG_ON(atomic_read(&cm_node->listener->pend_accepts_cnt) < 0);
 	}
-
-	spin_lock_irqsave(&cm_node->retrans_list_lock, flags);
-	list_for_each_safe(list_core, list_node_temp, &cm_node->retrans_list) {
-		send_entry = container_of(list_core, struct nes_timer_entry, list);
-		list_del(&send_entry->list);
-		spin_unlock_irqrestore(&cm_node->retrans_list_lock, flags);
-		dev_kfree_skb_any(send_entry->skb);
-		kfree(send_entry);
-		spin_lock_irqsave(&cm_node->retrans_list_lock, flags);
-		continue;
-	}
-	spin_unlock_irqrestore(&cm_node->retrans_list_lock, flags);
-
+	BUG_ON(cm_node->send_entry);
 	spin_lock_irqsave(&cm_node->recv_list_lock, flags);
 	list_for_each_safe(list_core, list_node_temp, &cm_node->recv_list) {
-		recv_entry = container_of(list_core, struct nes_timer_entry, list);
+		recv_entry = container_of(list_core, struct nes_timer_entry,
+				list);
 		list_del(&recv_entry->list);
 		cm_id = cm_node->cm_id;
 		spin_unlock_irqrestore(&cm_node->recv_list_lock, flags);
-		if (recv_entry->type == NES_TIMER_TYPE_CLOSE) {
-			nesqp = (struct nes_qp *)recv_entry->skb;
-			spin_lock_irqsave(&nesqp->lock, qplockflags);
-			if (nesqp->cm_id) {
-				nes_debug(NES_DBG_CM, "QP%u: cm_id = %p: ****** HIT A NES_TIMER_TYPE_CLOSE"
-						" with something to do!!! ******\n",
-						nesqp->hwqp.qp_id, cm_id);
-				nesqp->hw_tcp_state = NES_AEQE_TCP_STATE_CLOSED;
-				nesqp->last_aeq = NES_AEQE_AEID_RESET_SENT;
-				nesqp->ibqp_state = IB_QPS_ERR;
-				spin_unlock_irqrestore(&nesqp->lock, qplockflags);
-				nes_cm_disconn(nesqp);
-			} else {
-				spin_unlock_irqrestore(&nesqp->lock, qplockflags);
-				nes_debug(NES_DBG_CM, "QP%u: cm_id = %p: ****** HIT A NES_TIMER_TYPE_CLOSE"
-						" with nothing to do!!! ******\n",
-						nesqp->hwqp.qp_id, cm_id);
-				nes_rem_ref(&nesqp->ibqp);
-			}
-			cm_id->rem_ref(cm_id);
-		} else if (recv_entry->type == NES_TIMER_TYPE_RECV) {
-			dev_kfree_skb_any(recv_entry->skb);
+		nesqp = (struct nes_qp *)recv_entry->skb;
+		spin_lock_irqsave(&nesqp->lock, qplockflags);
+		if (nesqp->cm_id) {
+			nes_debug(NES_DBG_CM, "QP%u: cm_id = %p: HIT A "
+				"NES_TIMER_TYPE_CLOSE with something to do!\n",
+				nesqp->hwqp.qp_id, cm_id);
+			nesqp->hw_tcp_state = NES_AEQE_TCP_STATE_CLOSED;
+			nesqp->last_aeq = NES_AEQE_AEID_RESET_SENT;
+			nesqp->ibqp_state = IB_QPS_ERR;
+			spin_unlock_irqrestore(&nesqp->lock, qplockflags);
+			nes_cm_disconn(nesqp);
+		} else {
+			spin_unlock_irqrestore(&nesqp->lock, qplockflags);
+			nes_debug(NES_DBG_CM, "QP%u: cm_id = %p: HIT A "
+				"NES_TIMER_TYPE_CLOSE with nothing to do!\n",
+				nesqp->hwqp.qp_id, cm_id);
 		}
+		cm_id->rem_ref(cm_id);
+
 		kfree(recv_entry);
 		spin_lock_irqsave(&cm_node->recv_list_lock, flags);
 	}
@@ -1221,23 +1202,31 @@ static int rem_ref_cm_node(struct nes_cm_core *cm_core,
 	} else {
 		if (cm_node->apbvt_set && cm_node->nesvnic) {
 			nes_manage_apbvt(cm_node->nesvnic, cm_node->loc_port,
-					PCI_FUNC(cm_node->nesvnic->nesdev->pcidev->devfn),
-					NES_MANAGE_APBVT_DEL);
+				PCI_FUNC(
+				cm_node->nesvnic->nesdev->pcidev->devfn),
+				NES_MANAGE_APBVT_DEL);
 		}
 	}
 
-	kfree(cm_node);
 	atomic_dec(&cm_core->node_cnt);
 	atomic_inc(&cm_nodes_destroyed);
+	nesqp = cm_node->nesqp;
+	if (nesqp) {
+		nesqp->cm_node = NULL;
+		nes_rem_ref(&nesqp->ibqp);
+		cm_node->nesqp = NULL;
+	}
 
+	cm_node->freed = 1;
+	kfree(cm_node);
 	return 0;
 }
 
-
 /**
  * process_options
  */
-static int process_options(struct nes_cm_node *cm_node, u8 *optionsloc, u32 optionsize, u32 syn_packet)
+static int process_options(struct nes_cm_node *cm_node, u8 *optionsloc,
+	u32 optionsize, u32 syn_packet)
 {
 	u32 tmp;
 	u32 offset = 0;
@@ -1247,35 +1236,37 @@ static int process_options(struct nes_cm_node *cm_node, u8 *optionsloc, u32 opti
 	while (offset < optionsize) {
 		all_options = (union all_known_options *)(optionsloc + offset);
 		switch (all_options->as_base.optionnum) {
-			case OPTION_NUMBER_END:
-				offset = optionsize;
-				break;
-			case OPTION_NUMBER_NONE:
-				offset += 1;
-				continue;
-			case OPTION_NUMBER_MSS:
-				nes_debug(NES_DBG_CM, "%s: MSS Length: %d Offset: %d Size: %d\n",
-						__func__,
-						all_options->as_mss.length, offset, optionsize);
-				got_mss_option = 1;
-				if (all_options->as_mss.length != 4) {
-					return 1;
-				} else {
-					tmp = ntohs(all_options->as_mss.mss);
-					if (tmp > 0 && tmp < cm_node->tcp_cntxt.mss)
-						cm_node->tcp_cntxt.mss = tmp;
-				}
-				break;
-			case OPTION_NUMBER_WINDOW_SCALE:
-				cm_node->tcp_cntxt.snd_wscale = all_options->as_windowscale.shiftcount;
-				break;
-			case OPTION_NUMBER_WRITE0:
-				cm_node->send_write0 = 1;
-				break;
-			default:
-				nes_debug(NES_DBG_CM, "TCP Option not understood: %x\n",
-						all_options->as_base.optionnum);
-				break;
+		case OPTION_NUMBER_END:
+			offset = optionsize;
+			break;
+		case OPTION_NUMBER_NONE:
+			offset += 1;
+			continue;
+		case OPTION_NUMBER_MSS:
+			nes_debug(NES_DBG_CM, "%s: MSS Length: %d Offset: %d "
+				"Size: %d\n", __func__,
+				all_options->as_mss.length, offset, optionsize);
+			got_mss_option = 1;
+			if (all_options->as_mss.length != 4) {
+				return 1;
+			} else {
+				tmp = ntohs(all_options->as_mss.mss);
+				if (tmp > 0 && tmp <
+					cm_node->tcp_cntxt.mss)
+					cm_node->tcp_cntxt.mss = tmp;
+			}
+			break;
+		case OPTION_NUMBER_WINDOW_SCALE:
+			cm_node->tcp_cntxt.snd_wscale =
+				all_options->as_windowscale.shiftcount;
+			break;
+		case OPTION_NUMBER_WRITE0:
+			cm_node->send_write0 = 1;
+			break;
+		default:
+			nes_debug(NES_DBG_CM, "TCP Option not understood: %x\n",
+				all_options->as_base.optionnum);
+			break;
 		}
 		offset += all_options->as_base.length;
 	}
@@ -1284,300 +1275,491 @@ static int process_options(struct nes_cm_node *cm_node, u8 *optionsloc, u32 opti
 	return 0;
 }
 
+static void drop_packet(struct sk_buff *skb)
+{
+	atomic_inc(&cm_accel_dropped_pkts);
+	dev_kfree_skb_any(skb);
+}
 
-/**
- * process_packet
- */
-static int process_packet(struct nes_cm_node *cm_node, struct sk_buff *skb,
-			  struct nes_cm_core *cm_core)
+static void handle_fin_pkt(struct nes_cm_node *cm_node, struct sk_buff *skb,
+	struct tcphdr *tcph)
 {
-	int optionsize;
-	int datasize;
-	int ret = 0;
-	struct tcphdr *tcph = tcp_hdr(skb);
-	u32 inc_sequence;
-	if (cm_node->state == NES_CM_STATE_SYN_SENT && tcph->syn) {
-		inc_sequence = ntohl(tcph->seq);
-		cm_node->tcp_cntxt.rcv_nxt = inc_sequence;
+	atomic_inc(&cm_resets_recvd);
+	nes_debug(NES_DBG_CM, "Received FIN, cm_node = %p, state = %u. "
+		"refcnt=%d\n", cm_node, cm_node->state,
+		atomic_read(&cm_node->ref_count));
+	cm_node->tcp_cntxt.rcv_nxt++;
+	cleanup_retrans_entry(cm_node);
+	switch (cm_node->state) {
+	case NES_CM_STATE_SYN_RCVD:
+	case NES_CM_STATE_SYN_SENT:
+	case NES_CM_STATE_ESTABLISHED:
+	case NES_CM_STATE_MPAREQ_SENT:
+		cm_node->state = NES_CM_STATE_LAST_ACK;
+		send_fin(cm_node, skb);
+		break;
+	case NES_CM_STATE_FIN_WAIT1:
+		cm_node->state = NES_CM_STATE_CLOSING;
+		send_ack(cm_node, skb);
+		break;
+	case NES_CM_STATE_FIN_WAIT2:
+		cm_node->state = NES_CM_STATE_TIME_WAIT;
+		send_ack(cm_node, skb);
+		cm_node->state = NES_CM_STATE_CLOSED;
+		break;
+	case NES_CM_STATE_TSA:
+	default:
+		nes_debug(NES_DBG_CM, "Error Rcvd FIN for node-%p state = %d\n",
+			cm_node, cm_node->state);
+		drop_packet(skb);
+		break;
 	}
+}
 
-	if ((!tcph) || (cm_node->state == NES_CM_STATE_TSA)) {
-		BUG_ON(!tcph);
-		atomic_inc(&cm_accel_dropped_pkts);
-		return -1;
-	}
 
-	if (tcph->rst) {
-		atomic_inc(&cm_resets_recvd);
-		nes_debug(NES_DBG_CM, "Received Reset, cm_node = %p, state = %u. refcnt=%d\n",
-				cm_node, cm_node->state, atomic_read(&cm_node->ref_count));
-		switch (cm_node->state) {
-			case NES_CM_STATE_LISTENING:
-				rem_ref_cm_node(cm_core, cm_node);
-				break;
-			case NES_CM_STATE_TSA:
-			case NES_CM_STATE_CLOSED:
-				break;
-			case NES_CM_STATE_SYN_RCVD:
-					nes_debug(NES_DBG_CM, "Received a reset for local 0x%08X:%04X,"
-							" remote 0x%08X:%04X, node state = %u\n",
-							cm_node->loc_addr, cm_node->loc_port,
-							cm_node->rem_addr, cm_node->rem_port,
-							cm_node->state);
-				rem_ref_cm_node(cm_core, cm_node);
-				break;
-			case NES_CM_STATE_ONE_SIDE_ESTABLISHED:
-			case NES_CM_STATE_ESTABLISHED:
-			case NES_CM_STATE_MPAREQ_SENT:
-			default:
-					nes_debug(NES_DBG_CM, "Received a reset for local 0x%08X:%04X,"
-							" remote 0x%08X:%04X, node state = %u refcnt=%d\n",
-							cm_node->loc_addr, cm_node->loc_port,
-							cm_node->rem_addr, cm_node->rem_port,
-							cm_node->state, atomic_read(&cm_node->ref_count));
-				/* create event */
-				cm_node->state = NES_CM_STATE_CLOSED;
+static void handle_rst_pkt(struct nes_cm_node *cm_node, struct sk_buff *skb,
+	struct tcphdr *tcph)
+{
 
-				create_event(cm_node, NES_CM_EVENT_ABORTED);
-				break;
+	int	reset = 0;	/* whether to send reset in case of err.. */
+	atomic_inc(&cm_resets_recvd);
+	nes_debug(NES_DBG_CM, "Received Reset, cm_node = %p, state = %u."
+			" refcnt=%d\n", cm_node, cm_node->state,
+			atomic_read(&cm_node->ref_count));
+	cleanup_retrans_entry(cm_node);
+	switch (cm_node->state) {
+	case NES_CM_STATE_SYN_SENT:
+	case NES_CM_STATE_MPAREQ_SENT:
+		nes_debug(NES_DBG_CM, "%s[%u] create abort for cm_node=%p "
+			"listener=%p state=%d\n", __func__, __LINE__, cm_node,
+			cm_node->listener, cm_node->state);
+		active_open_err(cm_node, skb, reset);
+		break;
+	/* For PASSIVE open states, remove the cm_node event */
+	case NES_CM_STATE_ESTABLISHED:
+	case NES_CM_STATE_SYN_RCVD:
+	case NES_CM_STATE_LISTENING:
+		nes_debug(NES_DBG_CM, "Bad state %s[%u]\n", __func__, __LINE__);
+		passive_open_err(cm_node, skb, reset);
+		break;
+	case NES_CM_STATE_TSA:
+	default:
+		break;
+	}
+}
 
+static void handle_rcv_mpa(struct nes_cm_node *cm_node, struct sk_buff *skb,
+	enum nes_cm_event_type type)
+{
+
+	int	ret;
+	int datasize = skb->len;
+	u8 *dataloc = skb->data;
+	ret = parse_mpa(cm_node, dataloc, datasize);
+	if (ret < 0) {
+		nes_debug(NES_DBG_CM, "didn't like MPA Request\n");
+		if (type == NES_CM_EVENT_CONNECTED) {
+			nes_debug(NES_DBG_CM, "%s[%u] create abort for "
+				"cm_node=%p listener=%p state=%d\n", __func__,
+				__LINE__, cm_node, cm_node->listener,
+				cm_node->state);
+			active_open_err(cm_node, skb, 1);
+		} else {
+			passive_open_err(cm_node, skb, 1);
 		}
-		return -1;
+	} else {
+		cleanup_retrans_entry(cm_node);
+		dev_kfree_skb_any(skb);
+		if (type == NES_CM_EVENT_CONNECTED)
+			cm_node->state = NES_CM_STATE_TSA;
+		create_event(cm_node, type);
+
+	}
+	return ;
+}
+
+static void indicate_pkt_err(struct nes_cm_node *cm_node, struct sk_buff *skb)
+{
+	switch (cm_node->state) {
+	case NES_CM_STATE_SYN_SENT:
+	case NES_CM_STATE_MPAREQ_SENT:
+		nes_debug(NES_DBG_CM, "%s[%u] create abort for cm_node=%p "
+			"listener=%p state=%d\n", __func__, __LINE__, cm_node,
+			cm_node->listener, cm_node->state);
+		active_open_err(cm_node, skb, 1);
+		break;
+	case NES_CM_STATE_ESTABLISHED:
+	case NES_CM_STATE_SYN_RCVD:
+		passive_open_err(cm_node, skb, 1);
+		break;
+	case NES_CM_STATE_TSA:
+	default:
+		drop_packet(skb);
 	}
+}
+
+static int check_syn(struct nes_cm_node *cm_node, struct tcphdr *tcph,
+	struct sk_buff *skb)
+{
+	int err;
+
+	err = ((ntohl(tcph->ack_seq) == cm_node->tcp_cntxt.loc_seq_num))? 0 : 1;
+	if (err)
+		active_open_err(cm_node, skb, 1);
+
+	return err;
+}
+
+static int check_seq(struct nes_cm_node *cm_node, struct tcphdr *tcph,
+	struct sk_buff *skb)
+{
+	int err = 0;
+	u32 seq;
+	u32 ack_seq;
+	u32 loc_seq_num = cm_node->tcp_cntxt.loc_seq_num;
+	u32 rcv_nxt = cm_node->tcp_cntxt.rcv_nxt;
+	u32 rcv_wnd;
+	seq = ntohl(tcph->seq);
+	ack_seq = ntohl(tcph->ack_seq);
+	rcv_wnd = cm_node->tcp_cntxt.rcv_wnd;
+	if (ack_seq != loc_seq_num)
+		err = 1;
+	else if ((seq + rcv_wnd) < rcv_nxt)
+		err = 1;
+	if (err) {
+		nes_debug(NES_DBG_CM, "%s[%u] create abort for cm_node=%p "
+			"listener=%p state=%d\n", __func__, __LINE__, cm_node,
+			cm_node->listener, cm_node->state);
+		indicate_pkt_err(cm_node, skb);
+		nes_debug(NES_DBG_CM, "seq ERROR cm_node =%p seq=0x%08X "
+			"rcv_nxt=0x%08X rcv_wnd=0x%x\n", cm_node, seq, rcv_nxt,
+			rcv_wnd);
+	}
+	return err;
+}
+
+/*
+ * handle_syn_pkt() is for Passive node. The syn packet is received when a node
+ * is created with a listener or it may comein as rexmitted packet which in
+ * that case will be just dropped.
+ */
+
+static void handle_syn_pkt(struct nes_cm_node *cm_node, struct sk_buff *skb,
+	struct tcphdr *tcph)
+{
+	int ret;
+	u32 inc_sequence;
+	int optionsize;
 
 	optionsize = (tcph->doff << 2) - sizeof(struct tcphdr);
+	skb_pull(skb, tcph->doff << 2);
+	inc_sequence = ntohl(tcph->seq);
 
-	skb_pull(skb, ip_hdr(skb)->ihl << 2);
+	switch (cm_node->state) {
+	case NES_CM_STATE_SYN_SENT:
+	case NES_CM_STATE_MPAREQ_SENT:
+		/* Rcvd syn on active open connection*/
+		active_open_err(cm_node, skb, 1);
+		break;
+	case NES_CM_STATE_LISTENING:
+		/* Passive OPEN */
+		cm_node->accept_pend = 1;
+		atomic_inc(&cm_node->listener->pend_accepts_cnt);
+		if (atomic_read(&cm_node->listener->pend_accepts_cnt) >
+				cm_node->listener->backlog) {
+			nes_debug(NES_DBG_CM, "drop syn due to backlog "
+				"pressure \n");
+			cm_backlog_drops++;
+			passive_open_err(cm_node, skb, 0);
+			break;
+		}
+		ret = handle_tcp_options(cm_node, tcph, skb, optionsize,
+			1);
+		if (ret) {
+			passive_open_err(cm_node, skb, 0);
+			/* drop pkt */
+			break;
+		}
+		cm_node->tcp_cntxt.rcv_nxt = inc_sequence + 1;
+		BUG_ON(cm_node->send_entry);
+		cm_node->state = NES_CM_STATE_SYN_RCVD;
+		send_syn(cm_node, 1, skb);
+		break;
+	case NES_CM_STATE_TSA:
+	case NES_CM_STATE_ESTABLISHED:
+	case NES_CM_STATE_FIN_WAIT1:
+	case NES_CM_STATE_FIN_WAIT2:
+	case NES_CM_STATE_MPAREQ_RCVD:
+	case NES_CM_STATE_LAST_ACK:
+	case NES_CM_STATE_CLOSING:
+	case NES_CM_STATE_UNKNOWN:
+	case NES_CM_STATE_CLOSED:
+	default:
+		drop_packet(skb);
+		break;
+	}
+}
+
+static void handle_synack_pkt(struct nes_cm_node *cm_node, struct sk_buff *skb,
+	struct tcphdr *tcph)
+{
+
+	int ret;
+	u32 inc_sequence;
+	int optionsize;
+
+	optionsize = (tcph->doff << 2) - sizeof(struct tcphdr);
 	skb_pull(skb, tcph->doff << 2);
+	inc_sequence = ntohl(tcph->seq);
+	switch (cm_node->state) {
+	case NES_CM_STATE_SYN_SENT:
+		/* active open */
+		if (check_syn(cm_node, tcph, skb))
+			return;
+		cm_node->tcp_cntxt.rem_ack_num = ntohl(tcph->ack_seq);
+		/* setup options */
+		ret = handle_tcp_options(cm_node, tcph, skb, optionsize, 0);
+		if (ret) {
+			nes_debug(NES_DBG_CM, "cm_node=%p tcp_options failed\n",
+				cm_node);
+			break;
+		}
+		cleanup_retrans_entry(cm_node);
+		cm_node->tcp_cntxt.rcv_nxt = inc_sequence + 1;
+		send_mpa_request(cm_node, skb);
+		cm_node->state = NES_CM_STATE_MPAREQ_SENT;
+		break;
+	case NES_CM_STATE_MPAREQ_RCVD:
+		/* passive open, so should not be here */
+		passive_open_err(cm_node, skb, 1);
+		break;
+	case NES_CM_STATE_ESTABLISHED:
+	case NES_CM_STATE_FIN_WAIT1:
+	case NES_CM_STATE_FIN_WAIT2:
+	case NES_CM_STATE_LAST_ACK:
+	case NES_CM_STATE_TSA:
+	case NES_CM_STATE_CLOSING:
+	case NES_CM_STATE_UNKNOWN:
+	case NES_CM_STATE_CLOSED:
+	case NES_CM_STATE_MPAREQ_SENT:
+	default:
+		drop_packet(skb);
+		break;
+	}
+}
 
-	datasize = skb->len;
+static void handle_ack_pkt(struct nes_cm_node *cm_node, struct sk_buff *skb,
+	struct tcphdr *tcph)
+{
+	int datasize = 0;
+	u32 inc_sequence;
+	u32 rem_seq_ack;
+	u32 rem_seq;
+	if (check_seq(cm_node, tcph, skb))
+		return;
+
+	skb_pull(skb, tcph->doff << 2);
 	inc_sequence = ntohl(tcph->seq);
-	nes_debug(NES_DBG_CM, "datasize = %u, sequence = 0x%08X, ack_seq = 0x%08X,"
-			" rcv_nxt = 0x%08X Flags: %s %s.\n",
-			datasize, inc_sequence, ntohl(tcph->ack_seq),
-			cm_node->tcp_cntxt.rcv_nxt, (tcph->syn ? "SYN":""),
-			(tcph->ack ? "ACK":""));
-
-	if (!tcph->syn && (inc_sequence != cm_node->tcp_cntxt.rcv_nxt)
-		) {
-		nes_debug(NES_DBG_CM, "dropping packet, datasize = %u, sequence = 0x%08X,"
-				" ack_seq = 0x%08X, rcv_nxt = 0x%08X Flags: %s.\n",
-				datasize, inc_sequence, ntohl(tcph->ack_seq),
-				cm_node->tcp_cntxt.rcv_nxt, (tcph->ack ? "ACK":""));
-		if (cm_node->state == NES_CM_STATE_LISTENING) {
-			rem_ref_cm_node(cm_core, cm_node);
+	rem_seq = ntohl(tcph->seq);
+	rem_seq_ack =  ntohl(tcph->ack_seq);
+	datasize = skb->len;
+
+	switch (cm_node->state) {
+	case NES_CM_STATE_SYN_RCVD:
+		/* Passive OPEN */
+		cm_node->tcp_cntxt.rem_ack_num = ntohl(tcph->ack_seq);
+		cm_node->state = NES_CM_STATE_ESTABLISHED;
+		if (datasize) {
+			cm_node->tcp_cntxt.rcv_nxt = inc_sequence + datasize;
+			cm_node->state = NES_CM_STATE_MPAREQ_RCVD;
+			handle_rcv_mpa(cm_node, skb, NES_CM_EVENT_MPA_REQ);
+		 } else { /* rcvd ACK only */
+			dev_kfree_skb_any(skb);
+			cleanup_retrans_entry(cm_node);
+		 }
+		break;
+	case NES_CM_STATE_ESTABLISHED:
+		/* Passive OPEN */
+		/* We expect mpa frame to be received only */
+		if (datasize) {
+			cm_node->tcp_cntxt.rcv_nxt = inc_sequence + datasize;
+			cm_node->state = NES_CM_STATE_MPAREQ_RCVD;
+			handle_rcv_mpa(cm_node, skb,
+				NES_CM_EVENT_MPA_REQ);
+		} else
+			drop_packet(skb);
+		break;
+	case NES_CM_STATE_MPAREQ_SENT:
+		cm_node->tcp_cntxt.rem_ack_num = ntohl(tcph->ack_seq);
+		if (datasize) {
+			cm_node->tcp_cntxt.rcv_nxt = inc_sequence + datasize;
+			handle_rcv_mpa(cm_node, skb, NES_CM_EVENT_CONNECTED);
+		} else { /* Could be just an ack pkt.. */
+			cleanup_retrans_entry(cm_node);
+			dev_kfree_skb_any(skb);
 		}
-		return -1;
+		break;
+	case NES_CM_STATE_FIN_WAIT1:
+	case NES_CM_STATE_SYN_SENT:
+	case NES_CM_STATE_FIN_WAIT2:
+	case NES_CM_STATE_TSA:
+	case NES_CM_STATE_CLOSED:
+	case NES_CM_STATE_MPAREQ_RCVD:
+	case NES_CM_STATE_LAST_ACK:
+	case NES_CM_STATE_CLOSING:
+	case NES_CM_STATE_UNKNOWN:
+	default:
+		drop_packet(skb);
+		break;
 	}
+}
 
-		cm_node->tcp_cntxt.rcv_nxt = inc_sequence + datasize;
 
 
+static int handle_tcp_options(struct nes_cm_node *cm_node, struct tcphdr *tcph,
+	struct sk_buff *skb, int optionsize, int passive)
+{
+	u8 *optionsloc = (u8 *)&tcph[1];
 	if (optionsize) {
-		u8 *optionsloc = (u8 *)&tcph[1];
-		if (process_options(cm_node, optionsloc, optionsize, (u32)tcph->syn)) {
-			nes_debug(NES_DBG_CM, "%s: Node %p, Sending RESET\n", __func__, cm_node);
-			send_reset(cm_node);
-			if (cm_node->state != NES_CM_STATE_SYN_SENT)
-			rem_ref_cm_node(cm_core, cm_node);
-			return 0;
+		if (process_options(cm_node, optionsloc, optionsize,
+			(u32)tcph->syn)) {
+			nes_debug(NES_DBG_CM, "%s: Node %p, Sending RESET\n",
+				__func__, cm_node);
+			if (passive)
+				passive_open_err(cm_node, skb, 0);
+			else
+				active_open_err(cm_node, skb, 0);
+			return 1;
 		}
-	} else if (tcph->syn)
-		cm_node->tcp_cntxt.mss = NES_CM_DEFAULT_MSS;
+	}
 
 	cm_node->tcp_cntxt.snd_wnd = ntohs(tcph->window) <<
 			cm_node->tcp_cntxt.snd_wscale;
 
-	if (cm_node->tcp_cntxt.snd_wnd > cm_node->tcp_cntxt.max_snd_wnd) {
+	if (cm_node->tcp_cntxt.snd_wnd > cm_node->tcp_cntxt.max_snd_wnd)
 		cm_node->tcp_cntxt.max_snd_wnd = cm_node->tcp_cntxt.snd_wnd;
-	}
+	return 0;
+}
 
-	if (tcph->ack) {
-		cm_node->tcp_cntxt.rem_ack_num = ntohl(tcph->ack_seq);
-		switch (cm_node->state) {
-			case NES_CM_STATE_SYN_RCVD:
-			case NES_CM_STATE_SYN_SENT:
-				/* read and stash current sequence number */
-				if (cm_node->tcp_cntxt.rem_ack_num != cm_node->tcp_cntxt.loc_seq_num) {
-					nes_debug(NES_DBG_CM, "ERROR - cm_node->tcp_cntxt.rem_ack_num !="
-							" cm_node->tcp_cntxt.loc_seq_num\n");
-					send_reset(cm_node);
-					return 0;
-				}
-				if (cm_node->state == NES_CM_STATE_SYN_SENT)
-					cm_node->state = NES_CM_STATE_ONE_SIDE_ESTABLISHED;
-				else {
-						cm_node->state = NES_CM_STATE_ESTABLISHED;
-				}
-				break;
-			case NES_CM_STATE_LAST_ACK:
-				cm_node->state = NES_CM_STATE_CLOSED;
-				break;
-			case NES_CM_STATE_FIN_WAIT1:
-				cm_node->state = NES_CM_STATE_FIN_WAIT2;
-				break;
-			case NES_CM_STATE_CLOSING:
-				cm_node->state = NES_CM_STATE_TIME_WAIT;
-				/* need to schedule this to happen in 2MSL timeouts */
-				cm_node->state = NES_CM_STATE_CLOSED;
-				break;
-			case NES_CM_STATE_ONE_SIDE_ESTABLISHED:
-			case NES_CM_STATE_ESTABLISHED:
-			case NES_CM_STATE_MPAREQ_SENT:
-			case NES_CM_STATE_CLOSE_WAIT:
-			case NES_CM_STATE_TIME_WAIT:
-			case NES_CM_STATE_CLOSED:
-				break;
-			case NES_CM_STATE_LISTENING:
-				nes_debug(NES_DBG_CM, "Received an ACK on a listening port (SYN %d)\n", tcph->syn);
-				cm_node->tcp_cntxt.loc_seq_num = ntohl(tcph->ack_seq);
-				send_reset(cm_node);
-				/* send_reset bumps refcount, this should have been a new node */
-				rem_ref_cm_node(cm_core, cm_node);
-				return -1;
-				break;
-			case NES_CM_STATE_TSA:
-				nes_debug(NES_DBG_CM, "Received a packet with the ack bit set while in TSA state\n");
-				break;
-			case NES_CM_STATE_UNKNOWN:
-			case NES_CM_STATE_INITED:
-			case NES_CM_STATE_ACCEPTING:
-			case NES_CM_STATE_FIN_WAIT2:
-			default:
-				nes_debug(NES_DBG_CM, "Received ack from unknown state: %x\n",
-						cm_node->state);
-				send_reset(cm_node);
-				break;
-		}
-	}
+/*
+ * active_open_err() will send reset() if flag set..
+ * It will also send ABORT event.
+ */
 
-	if (tcph->syn) {
-		if (cm_node->state == NES_CM_STATE_LISTENING) {
-			/* do not exceed backlog */
-			atomic_inc(&cm_node->listener->pend_accepts_cnt);
-			if (atomic_read(&cm_node->listener->pend_accepts_cnt) >
-					cm_node->listener->backlog) {
-				nes_debug(NES_DBG_CM, "drop syn due to backlog pressure \n");
-				cm_backlog_drops++;
-				atomic_dec(&cm_node->listener->pend_accepts_cnt);
-				rem_ref_cm_node(cm_core, cm_node);
-				return 0;
-			}
-			cm_node->accept_pend = 1;
+static void active_open_err(struct nes_cm_node *cm_node, struct sk_buff *skb,
+	int reset)
+{
+	cleanup_retrans_entry(cm_node);
+	if (reset) {
+		nes_debug(NES_DBG_CM, "ERROR active err called for cm_node=%p, "
+				"state=%d\n", cm_node, cm_node->state);
+		add_ref_cm_node(cm_node);
+		send_reset(cm_node, skb);
+	} else
+		dev_kfree_skb_any(skb);
 
-		}
-		if (datasize == 0)
-			cm_node->tcp_cntxt.rcv_nxt ++;
+	cm_node->state = NES_CM_STATE_CLOSED;
+	create_event(cm_node, NES_CM_EVENT_ABORTED);
+}
 
-		if (cm_node->state == NES_CM_STATE_LISTENING) {
-			cm_node->state = NES_CM_STATE_SYN_RCVD;
-			send_syn(cm_node, 1);
-		}
-		if (cm_node->state == NES_CM_STATE_ONE_SIDE_ESTABLISHED) {
-			cm_node->state = NES_CM_STATE_ESTABLISHED;
-			/* send final handshake ACK */
-			ret = send_ack(cm_node);
-			if (ret < 0)
-				return ret;
+/*
+ * passive_open_err() will either do a reset() or will free up the skb and
+ * remove the cm_node.
+ */
 
-				cm_node->state = NES_CM_STATE_MPAREQ_SENT;
-				ret = send_mpa_request(cm_node);
-				if (ret < 0)
-					return ret;
-		}
+static void passive_open_err(struct nes_cm_node *cm_node, struct sk_buff *skb,
+	int reset)
+{
+	cleanup_retrans_entry(cm_node);
+	cm_node->state = NES_CM_STATE_CLOSED;
+	if (reset) {
+		nes_debug(NES_DBG_CM, "passive_open_err sending RST for "
+			"cm_node=%p state =%d\n", cm_node, cm_node->state);
+		send_reset(cm_node, skb);
+	} else {
+		dev_kfree_skb_any(skb);
+		rem_ref_cm_node(cm_node->cm_core, cm_node);
 	}
+}
 
-	if (tcph->fin) {
-		cm_node->tcp_cntxt.rcv_nxt++;
-		switch (cm_node->state) {
-			case NES_CM_STATE_SYN_RCVD:
-			case NES_CM_STATE_SYN_SENT:
-			case NES_CM_STATE_ONE_SIDE_ESTABLISHED:
-			case NES_CM_STATE_ESTABLISHED:
-			case NES_CM_STATE_ACCEPTING:
-			case NES_CM_STATE_MPAREQ_SENT:
-				cm_node->state = NES_CM_STATE_CLOSE_WAIT;
-				cm_node->state = NES_CM_STATE_LAST_ACK;
-				ret = send_fin(cm_node, NULL);
-				break;
-			case NES_CM_STATE_FIN_WAIT1:
-				cm_node->state = NES_CM_STATE_CLOSING;
-				ret = send_ack(cm_node);
-				break;
-			case NES_CM_STATE_FIN_WAIT2:
-				cm_node->state = NES_CM_STATE_TIME_WAIT;
-				cm_node->tcp_cntxt.loc_seq_num ++;
-				ret = send_ack(cm_node);
-				/* need to schedule this to happen in 2MSL timeouts */
-				cm_node->state = NES_CM_STATE_CLOSED;
-				break;
-			case NES_CM_STATE_CLOSE_WAIT:
-			case NES_CM_STATE_LAST_ACK:
-			case NES_CM_STATE_CLOSING:
-			case NES_CM_STATE_TSA:
-			default:
-				nes_debug(NES_DBG_CM, "Received a fin while in %x state\n",
-						cm_node->state);
-				ret = -EINVAL;
-				break;
-		}
+/*
+ * free_retrans_entry() routines assumes that the retrans_list_lock has
+ * been acquired before calling.
+ */
+static void free_retrans_entry(struct nes_cm_node *cm_node)
+{
+	struct nes_timer_entry *send_entry;
+	send_entry = cm_node->send_entry;
+	if (send_entry) {
+		cm_node->send_entry = NULL;
+		dev_kfree_skb_any(send_entry->skb);
+		kfree(send_entry);
+		rem_ref_cm_node(cm_node->cm_core, cm_node);
 	}
+}
 
-	if (datasize) {
-		u8 *dataloc = skb->data;
-		/* figure out what state we are in and handle transition to next state */
-		switch (cm_node->state) {
-			case NES_CM_STATE_LISTENING:
-			case NES_CM_STATE_SYN_RCVD:
-			case NES_CM_STATE_SYN_SENT:
-			case NES_CM_STATE_FIN_WAIT1:
-			case NES_CM_STATE_FIN_WAIT2:
-			case NES_CM_STATE_CLOSE_WAIT:
-			case NES_CM_STATE_LAST_ACK:
-			case NES_CM_STATE_CLOSING:
-				break;
-			case  NES_CM_STATE_MPAREQ_SENT:
-				/* recv the mpa res frame, ret=frame len (incl priv data) */
-				ret = parse_mpa(cm_node, dataloc, datasize);
-				if (ret < 0)
-					break;
-				/* set the req frame payload len in skb */
-				/* we are done handling this state, set node to a TSA state */
-				cm_node->state = NES_CM_STATE_TSA;
-				send_ack(cm_node);
-				create_event(cm_node, NES_CM_EVENT_CONNECTED);
-				break;
-
-			case  NES_CM_STATE_ESTABLISHED:
-				/* we are expecting an MPA req frame */
-				ret = parse_mpa(cm_node, dataloc, datasize);
-				if (ret < 0) {
-					break;
-				}
-				cm_node->state = NES_CM_STATE_TSA;
-				send_ack(cm_node);
-				/* we got a valid MPA request, create an event */
-				create_event(cm_node, NES_CM_EVENT_MPA_REQ);
-				break;
-			case  NES_CM_STATE_TSA:
-				handle_exception_pkt(cm_node, skb);
-				break;
-			case NES_CM_STATE_UNKNOWN:
-			case NES_CM_STATE_INITED:
-			default:
-				ret = -1;
-		}
-	}
+static void cleanup_retrans_entry(struct nes_cm_node *cm_node)
+{
+	unsigned long flags;
 
-	return ret;
+	spin_lock_irqsave(&cm_node->retrans_list_lock, flags);
+	free_retrans_entry(cm_node);
+	spin_unlock_irqrestore(&cm_node->retrans_list_lock, flags);
 }
 
+/**
+ * process_packet
+ * Returns skb if to be freed, else it will return NULL if already used..
+ */
+static void process_packet(struct nes_cm_node *cm_node, struct sk_buff *skb,
+	struct nes_cm_core *cm_core)
+{
+	enum nes_tcpip_pkt_type	pkt_type = NES_PKT_TYPE_UNKNOWN;
+	struct tcphdr *tcph = tcp_hdr(skb);
+	skb_pull(skb, ip_hdr(skb)->ihl << 2);
+
+	nes_debug(NES_DBG_CM, "process_packet: cm_node=%p state =%d syn=%d "
+		"ack=%d rst=%d fin=%d\n", cm_node, cm_node->state, tcph->syn,
+		tcph->ack, tcph->rst, tcph->fin);
+
+	if (tcph->rst)
+		pkt_type = NES_PKT_TYPE_RST;
+	else if (tcph->syn) {
+		pkt_type = NES_PKT_TYPE_SYN;
+		if (tcph->ack)
+			pkt_type = NES_PKT_TYPE_SYNACK;
+	} else if (tcph->fin)
+		pkt_type = NES_PKT_TYPE_FIN;
+	else if (tcph->ack)
+		pkt_type = NES_PKT_TYPE_ACK;
+
+	switch (pkt_type) {
+	case NES_PKT_TYPE_SYN:
+		handle_syn_pkt(cm_node, skb, tcph);
+		break;
+	case NES_PKT_TYPE_SYNACK:
+		handle_synack_pkt(cm_node, skb, tcph);
+		break;
+	case NES_PKT_TYPE_ACK:
+		handle_ack_pkt(cm_node, skb, tcph);
+		break;
+	case NES_PKT_TYPE_RST:
+		handle_rst_pkt(cm_node, skb, tcph);
+		break;
+	case NES_PKT_TYPE_FIN:
+		handle_fin_pkt(cm_node, skb, tcph);
+		break;
+	default:
+		drop_packet(skb);
+		break;
+	}
+}
 
 /**
  * mini_cm_listen - create a listen node with params
  */
 static struct nes_cm_listener *mini_cm_listen(struct nes_cm_core *cm_core,
-		struct nes_vnic *nesvnic, struct nes_cm_info *cm_info)
+	struct nes_vnic *nesvnic, struct nes_cm_info *cm_info)
 {
 	struct nes_cm_listener *listener;
 	unsigned long flags;
@@ -1644,37 +1826,36 @@ static struct nes_cm_listener *mini_cm_listen(struct nes_cm_core *cm_core,
 /**
  * mini_cm_connect - make a connection node with params
  */
-static struct nes_cm_node *mini_cm_connect(struct nes_cm_core *cm_core,
-					   struct nes_vnic *nesvnic,
-					   struct ietf_mpa_frame *mpa_frame,
-					   struct nes_cm_info *cm_info)
+struct nes_cm_node *mini_cm_connect(struct nes_cm_core *cm_core,
+	struct nes_vnic *nesvnic, u16 private_data_len,
+	void *private_data, struct nes_cm_info *cm_info)
 {
 	int ret = 0;
 	struct nes_cm_node *cm_node;
 	struct nes_cm_listener *loopbackremotelistener;
 	struct nes_cm_node *loopbackremotenode;
 	struct nes_cm_info loopback_cm_info;
-
-	u16 mpa_frame_size = sizeof(struct ietf_mpa_frame) +
-			ntohs(mpa_frame->priv_data_len);
-
-	cm_info->loc_addr = htonl(cm_info->loc_addr);
-	cm_info->rem_addr = htonl(cm_info->rem_addr);
-	cm_info->loc_port = htons(cm_info->loc_port);
-	cm_info->rem_port = htons(cm_info->rem_port);
+	u16 mpa_frame_size = sizeof(struct ietf_mpa_frame) + private_data_len;
+	struct ietf_mpa_frame *mpa_frame = NULL;
 
 	/* create a CM connection node */
 	cm_node = make_cm_node(cm_core, nesvnic, cm_info, NULL);
 	if (!cm_node)
 		return NULL;
+	mpa_frame = &cm_node->mpa_frame;
+	strcpy(mpa_frame->key, IEFT_MPA_KEY_REQ);
+	mpa_frame->flags = IETF_MPA_FLAGS_CRC;
+	mpa_frame->rev =  IETF_MPA_VERSION;
+	mpa_frame->priv_data_len = htons(private_data_len);
 
 	/* set our node side to client (active) side */
 	cm_node->tcp_cntxt.client = 1;
 	cm_node->tcp_cntxt.rcv_wscale = NES_CM_DEFAULT_RCV_WND_SCALE;
 
 	if (cm_info->loc_addr == cm_info->rem_addr) {
-		loopbackremotelistener = find_listener(cm_core, cm_node->rem_addr,
-				cm_node->rem_port, NES_CM_LISTENER_ACTIVE_STATE);
+		loopbackremotelistener = find_listener(cm_core,
+				ntohl(nesvnic->local_ipaddr), cm_node->rem_port,
+				NES_CM_LISTENER_ACTIVE_STATE);
 		if (loopbackremotelistener == NULL) {
 			create_event(cm_node, NES_CM_EVENT_ABORTED);
 		} else {
@@ -1683,26 +1864,35 @@ static struct nes_cm_node *mini_cm_connect(struct nes_cm_core *cm_core,
 			loopback_cm_info.loc_port = cm_info->rem_port;
 			loopback_cm_info.rem_port = cm_info->loc_port;
 			loopback_cm_info.cm_id = loopbackremotelistener->cm_id;
-			loopbackremotenode = make_cm_node(cm_core, nesvnic, &loopback_cm_info,
-					loopbackremotelistener);
+			loopbackremotenode = make_cm_node(cm_core, nesvnic,
+				&loopback_cm_info, loopbackremotelistener);
 			loopbackremotenode->loopbackpartner = cm_node;
-			loopbackremotenode->tcp_cntxt.rcv_wscale = NES_CM_DEFAULT_RCV_WND_SCALE;
+			loopbackremotenode->tcp_cntxt.rcv_wscale =
+				NES_CM_DEFAULT_RCV_WND_SCALE;
 			cm_node->loopbackpartner = loopbackremotenode;
-			memcpy(loopbackremotenode->mpa_frame_buf, &mpa_frame->priv_data,
-					mpa_frame_size);
-			loopbackremotenode->mpa_frame_size = mpa_frame_size -
-					sizeof(struct ietf_mpa_frame);
+			memcpy(loopbackremotenode->mpa_frame_buf, private_data,
+				private_data_len);
+			loopbackremotenode->mpa_frame_size = private_data_len;
 
-			/* we are done handling this state, set node to a TSA state */
+			/* we are done handling this state. */
+			/* set node to a TSA state */
 			cm_node->state = NES_CM_STATE_TSA;
-			cm_node->tcp_cntxt.rcv_nxt = loopbackremotenode->tcp_cntxt.loc_seq_num;
-			loopbackremotenode->tcp_cntxt.rcv_nxt = cm_node->tcp_cntxt.loc_seq_num;
-			cm_node->tcp_cntxt.max_snd_wnd = loopbackremotenode->tcp_cntxt.rcv_wnd;
-			loopbackremotenode->tcp_cntxt.max_snd_wnd = cm_node->tcp_cntxt.rcv_wnd;
-			cm_node->tcp_cntxt.snd_wnd = loopbackremotenode->tcp_cntxt.rcv_wnd;
-			loopbackremotenode->tcp_cntxt.snd_wnd = cm_node->tcp_cntxt.rcv_wnd;
-			cm_node->tcp_cntxt.snd_wscale = loopbackremotenode->tcp_cntxt.rcv_wscale;
-			loopbackremotenode->tcp_cntxt.snd_wscale = cm_node->tcp_cntxt.rcv_wscale;
+			cm_node->tcp_cntxt.rcv_nxt =
+				loopbackremotenode->tcp_cntxt.loc_seq_num;
+			loopbackremotenode->tcp_cntxt.rcv_nxt =
+				cm_node->tcp_cntxt.loc_seq_num;
+			cm_node->tcp_cntxt.max_snd_wnd =
+				loopbackremotenode->tcp_cntxt.rcv_wnd;
+			loopbackremotenode->tcp_cntxt.max_snd_wnd =
+				cm_node->tcp_cntxt.rcv_wnd;
+			cm_node->tcp_cntxt.snd_wnd =
+				loopbackremotenode->tcp_cntxt.rcv_wnd;
+			loopbackremotenode->tcp_cntxt.snd_wnd =
+				cm_node->tcp_cntxt.rcv_wnd;
+			cm_node->tcp_cntxt.snd_wscale =
+				loopbackremotenode->tcp_cntxt.rcv_wscale;
+			loopbackremotenode->tcp_cntxt.snd_wscale =
+				cm_node->tcp_cntxt.rcv_wscale;
 
 			create_event(loopbackremotenode, NES_CM_EVENT_MPA_REQ);
 		}
@@ -1712,16 +1902,29 @@ static struct nes_cm_node *mini_cm_connect(struct nes_cm_core *cm_core,
 	/* set our node side to client (active) side */
 	cm_node->tcp_cntxt.client = 1;
 	/* init our MPA frame ptr */
-	memcpy(&cm_node->mpa_frame, mpa_frame, mpa_frame_size);
+	memcpy(mpa_frame->priv_data, private_data, private_data_len);
+
 	cm_node->mpa_frame_size = mpa_frame_size;
 
 	/* send a syn and goto syn sent state */
 	cm_node->state = NES_CM_STATE_SYN_SENT;
-	ret = send_syn(cm_node, 0);
+	ret = send_syn(cm_node, 0, NULL);
+
+	if (ret) {
+		/* error in sending the syn free up the cm_node struct */
+		nes_debug(NES_DBG_CM, "Api - connect() FAILED: dest "
+			"addr=0x%08X, port=0x%04x, cm_node=%p, cm_id = %p.\n",
+			cm_node->rem_addr, cm_node->rem_port, cm_node,
+			cm_node->cm_id);
+		rem_ref_cm_node(cm_node->cm_core, cm_node);
+		cm_node = NULL;
+	}
 
-	nes_debug(NES_DBG_CM, "Api - connect(): dest addr=0x%08X, port=0x%04x,"
-			" cm_node=%p, cm_id = %p.\n",
-			cm_node->rem_addr, cm_node->rem_port, cm_node, cm_node->cm_id);
+	if (cm_node)
+		nes_debug(NES_DBG_CM, "Api - connect(): dest addr=0x%08X,"
+			"port=0x%04x, cm_node=%p, cm_id = %p.\n",
+			cm_node->rem_addr, cm_node->rem_port, cm_node,
+			cm_node->cm_id);
 
 	return cm_node;
 }
@@ -1731,8 +1934,8 @@ static struct nes_cm_node *mini_cm_connect(struct nes_cm_core *cm_core,
  * mini_cm_accept - accept a connection
  * This function is never called
  */
-static int mini_cm_accept(struct nes_cm_core *cm_core, struct ietf_mpa_frame *mpa_frame,
-			  struct nes_cm_node *cm_node)
+static int mini_cm_accept(struct nes_cm_core *cm_core,
+	struct ietf_mpa_frame *mpa_frame, struct nes_cm_node *cm_node)
 {
 	return 0;
 }
@@ -1742,32 +1945,26 @@ static int mini_cm_accept(struct nes_cm_core *cm_core, struct ietf_mpa_frame *mp
  * mini_cm_reject - reject and teardown a connection
  */
 static int mini_cm_reject(struct nes_cm_core *cm_core,
-			  struct ietf_mpa_frame *mpa_frame,
-			  struct nes_cm_node *cm_node)
+	struct ietf_mpa_frame *mpa_frame, struct nes_cm_node *cm_node)
 {
 	int ret = 0;
-	struct sk_buff *skb;
-	u16 mpa_frame_size = sizeof(struct ietf_mpa_frame) +
-			ntohs(mpa_frame->priv_data_len);
 
-	skb = get_free_pkt(cm_node);
-	if (!skb) {
-		nes_debug(NES_DBG_CM, "Failed to get a Free pkt\n");
-		return -1;
-	}
-
-	/* send an MPA Request frame */
-	form_cm_frame(skb, cm_node, NULL, 0, mpa_frame, mpa_frame_size, SET_ACK | SET_FIN);
-	ret = schedule_nes_timer(cm_node, skb, NES_TIMER_TYPE_SEND, 1, 0);
+	nes_debug(NES_DBG_CM, "%s cm_node=%p type=%d state=%d\n",
+		__func__, cm_node, cm_node->tcp_cntxt.client, cm_node->state);
 
+	if (cm_node->tcp_cntxt.client)
+		return ret;
+	cleanup_retrans_entry(cm_node);
 	cm_node->state = NES_CM_STATE_CLOSED;
 	ret = send_fin(cm_node, NULL);
 
-	if (ret < 0) {
-		printk(KERN_INFO PFX "failed to send MPA Reply (reject)\n");
-		return ret;
+	if (cm_node->accept_pend) {
+		BUG_ON(!cm_node->listener);
+		atomic_dec(&cm_node->listener->pend_accepts_cnt);
+		BUG_ON(atomic_read(&cm_node->listener->pend_accepts_cnt) < 0);
 	}
 
+	ret = send_reset(cm_node, NULL);
 	return ret;
 }
 
@@ -1783,35 +1980,39 @@ static int mini_cm_close(struct nes_cm_core *cm_core, struct nes_cm_node *cm_nod
 		return -EINVAL;
 
 	switch (cm_node->state) {
-		/* if passed in node is null, create a reference key node for node search */
-		/* check if we found an owner node for this pkt */
-		case NES_CM_STATE_SYN_RCVD:
-		case NES_CM_STATE_SYN_SENT:
-		case NES_CM_STATE_ONE_SIDE_ESTABLISHED:
-		case NES_CM_STATE_ESTABLISHED:
-		case NES_CM_STATE_ACCEPTING:
-		case NES_CM_STATE_MPAREQ_SENT:
-			cm_node->state = NES_CM_STATE_FIN_WAIT1;
-			send_fin(cm_node, NULL);
-			break;
-		case NES_CM_STATE_CLOSE_WAIT:
-			cm_node->state = NES_CM_STATE_LAST_ACK;
-			send_fin(cm_node, NULL);
-			break;
-		case NES_CM_STATE_FIN_WAIT1:
-		case NES_CM_STATE_FIN_WAIT2:
-		case NES_CM_STATE_LAST_ACK:
-		case NES_CM_STATE_TIME_WAIT:
-		case NES_CM_STATE_CLOSING:
-			ret = -1;
-			break;
-		case NES_CM_STATE_LISTENING:
-		case NES_CM_STATE_UNKNOWN:
-		case NES_CM_STATE_INITED:
-		case NES_CM_STATE_CLOSED:
-		case NES_CM_STATE_TSA:
-			ret = rem_ref_cm_node(cm_core, cm_node);
-			break;
+	case NES_CM_STATE_SYN_RCVD:
+	case NES_CM_STATE_SYN_SENT:
+	case NES_CM_STATE_ONE_SIDE_ESTABLISHED:
+	case NES_CM_STATE_ESTABLISHED:
+	case NES_CM_STATE_ACCEPTING:
+	case NES_CM_STATE_MPAREQ_SENT:
+	case NES_CM_STATE_MPAREQ_RCVD:
+		cleanup_retrans_entry(cm_node);
+		send_reset(cm_node, NULL);
+		break;
+	case NES_CM_STATE_CLOSE_WAIT:
+		cm_node->state = NES_CM_STATE_LAST_ACK;
+		send_fin(cm_node, NULL);
+		break;
+	case NES_CM_STATE_FIN_WAIT1:
+	case NES_CM_STATE_FIN_WAIT2:
+	case NES_CM_STATE_LAST_ACK:
+	case NES_CM_STATE_TIME_WAIT:
+	case NES_CM_STATE_CLOSING:
+		ret = -1;
+		break;
+	case NES_CM_STATE_LISTENING:
+	case NES_CM_STATE_UNKNOWN:
+	case NES_CM_STATE_INITED:
+	case NES_CM_STATE_CLOSED:
+		ret = rem_ref_cm_node(cm_core, cm_node);
+		break;
+	case NES_CM_STATE_TSA:
+		if (cm_node->send_entry)
+			printk(KERN_ERR "ERROR Close got called from STATE_TSA "
+				"send_entry=%p\n", cm_node->send_entry);
+		ret = rem_ref_cm_node(cm_core, cm_node);
+		break;
 	}
 	cm_node->cm_id = NULL;
 	return ret;
@@ -1822,25 +2023,30 @@ static int mini_cm_close(struct nes_cm_core *cm_core, struct nes_cm_node *cm_nod
  * recv_pkt - recv an ETHERNET packet, and process it through CM
  * node state machine
  */
-static int mini_cm_recv_pkt(struct nes_cm_core *cm_core, struct nes_vnic *nesvnic,
-			    struct sk_buff *skb)
+static void mini_cm_recv_pkt(struct nes_cm_core *cm_core,
+	struct nes_vnic *nesvnic, struct sk_buff *skb)
 {
 	struct nes_cm_node *cm_node = NULL;
 	struct nes_cm_listener *listener = NULL;
 	struct iphdr *iph;
 	struct tcphdr *tcph;
 	struct nes_cm_info nfo;
-	int ret = 0;
 
-	if (!skb || skb->len < sizeof(struct iphdr) + sizeof(struct tcphdr)) {
-		ret = -EINVAL;
-		goto out;
+	if (!skb)
+		return;
+	if (skb->len < sizeof(struct iphdr) + sizeof(struct tcphdr)) {
+		dev_kfree_skb_any(skb);
+		return;
 	}
 
 	iph = (struct iphdr *)skb->data;
 	tcph = (struct tcphdr *)(skb->data + sizeof(struct iphdr));
 	skb_reset_network_header(skb);
 	skb_set_transport_header(skb, sizeof(*tcph));
+	if (!tcph) {
+		dev_kfree_skb_any(skb);
+		return;
+	}
 	skb->len = ntohs(iph->tot_len);
 
 	nfo.loc_addr = ntohl(iph->daddr);
@@ -1853,61 +2059,60 @@ static int mini_cm_recv_pkt(struct nes_cm_core *cm_core, struct nes_vnic *nesvni
 		  NIPQUAD(iph->daddr), tcph->dest,
 		  NIPQUAD(iph->saddr), tcph->source);
 
-	/* note: this call is going to increment cm_node ref count */
-	cm_node = find_node(cm_core,
+	do {
+		cm_node = find_node(cm_core,
 			nfo.rem_port, nfo.rem_addr,
 			nfo.loc_port, nfo.loc_addr);
 
-	if (!cm_node) {
-		listener = find_listener(cm_core, nfo.loc_addr, nfo.loc_port,
-				NES_CM_LISTENER_ACTIVE_STATE);
-		if (listener) {
-			nfo.cm_id = listener->cm_id;
-			nfo.conn_type = listener->conn_type;
-		} else {
-			nfo.cm_id = NULL;
-			nfo.conn_type = 0;
-		}
-
-		cm_node = make_cm_node(cm_core, nesvnic, &nfo, listener);
 		if (!cm_node) {
-			nes_debug(NES_DBG_CM, "Unable to allocate node\n");
+			/* Only type of packet accepted are for */
+			/* the PASSIVE open (syn only) */
+			if ((!tcph->syn) || (tcph->ack)) {
+				cm_packets_dropped++;
+				break;
+			}
+			listener = find_listener(cm_core, nfo.loc_addr,
+				nfo.loc_port,
+				NES_CM_LISTENER_ACTIVE_STATE);
 			if (listener) {
-				nes_debug(NES_DBG_CM, "unable to allocate node and decrementing listener refcount\n");
+				nfo.cm_id = listener->cm_id;
+				nfo.conn_type = listener->conn_type;
+			} else {
+				nes_debug(NES_DBG_CM, "Unable to find listener "
+					"for the pkt\n");
+				cm_packets_dropped++;
+				dev_kfree_skb_any(skb);
+				break;
+			}
+
+			cm_node = make_cm_node(cm_core, nesvnic, &nfo,
+				listener);
+			if (!cm_node) {
+				nes_debug(NES_DBG_CM, "Unable to allocate "
+					"node\n");
+				cm_packets_dropped++;
 				atomic_dec(&listener->ref_count);
+				dev_kfree_skb_any(skb);
+				break;
 			}
-			ret = -1;
-			goto out;
-		}
-		if (!listener) {
-			nes_debug(NES_DBG_CM, "Packet found for unknown port %x refcnt=%d\n",
-					nfo.loc_port, atomic_read(&cm_node->ref_count));
-			if (!tcph->rst) {
-				nes_debug(NES_DBG_CM, "Packet found for unknown port=%d"
-						" rem_port=%d refcnt=%d\n",
-						nfo.loc_port, nfo.rem_port, atomic_read(&cm_node->ref_count));
-
-				cm_node->tcp_cntxt.rcv_nxt = ntohl(tcph->seq);
-				cm_node->tcp_cntxt.loc_seq_num = ntohl(tcph->ack_seq);
-				send_reset(cm_node);
+			if (!tcph->rst && !tcph->fin) {
+				cm_node->state = NES_CM_STATE_LISTENING;
+			} else {
+				cm_packets_dropped++;
+				rem_ref_cm_node(cm_core, cm_node);
+				dev_kfree_skb_any(skb);
+				break;
 			}
+			add_ref_cm_node(cm_node);
+		} else if (cm_node->state == NES_CM_STATE_TSA) {
 			rem_ref_cm_node(cm_core, cm_node);
-			ret = -1;
-			goto out;
+			atomic_inc(&cm_accel_dropped_pkts);
+			dev_kfree_skb_any(skb);
+			break;
 		}
-		add_ref_cm_node(cm_node);
-		cm_node->state = NES_CM_STATE_LISTENING;
-	}
-
-	nes_debug(NES_DBG_CM, "Processing Packet for node %p, data = (%p):\n",
-			cm_node, skb->data);
-	process_packet(cm_node, skb, cm_core);
-
-	rem_ref_cm_node(cm_core, cm_node);
-	out:
-	if (skb)
-		dev_kfree_skb_any(skb);
-	return ret;
+		process_packet(cm_node, skb, cm_core);
+		rem_ref_cm_node(cm_core, cm_node);
+	} while (0);
 }
 
 
@@ -2107,15 +2312,12 @@ int nes_cm_disconn(struct nes_qp *nesqp)
 	if (nesqp->disconn_pending == 0) {
 		nesqp->disconn_pending++;
 		spin_unlock_irqrestore(&nesqp->lock, flags);
-		/* nes_add_ref(&nesqp->ibqp); */
 		/* init our disconnect work element, to */
 		INIT_WORK(&nesqp->disconn_work, nes_disconnect_worker);
 
 		queue_work(g_cm_core->disconn_wq, &nesqp->disconn_work);
-	} else {
+	} else
 		spin_unlock_irqrestore(&nesqp->lock, flags);
-		nes_rem_ref(&nesqp->ibqp);
-	}
 
 	return 0;
 }
@@ -2161,7 +2363,6 @@ static int nes_cm_disconn_true(struct nes_qp *nesqp)
 		nes_debug(NES_DBG_CM, "QP%u disconnect_worker cmid is NULL\n",
 				nesqp->hwqp.qp_id);
 		spin_unlock_irqrestore(&nesqp->lock, flags);
-		nes_rem_ref(&nesqp->ibqp);
 		return -1;
 	}
 
@@ -2182,30 +2383,31 @@ static int nes_cm_disconn_true(struct nes_qp *nesqp)
 			atomic_inc(&cm_disconnects);
 			cm_event.event = IW_CM_EVENT_DISCONNECT;
 			if (last_ae == NES_AEQE_AEID_LLP_CONNECTION_RESET) {
-				issued_disconnect_reset = 1;
 				cm_event.status = IW_CM_EVENT_STATUS_RESET;
-				nes_debug(NES_DBG_CM, "Generating a CM Disconnect Event (status reset) for "
-						" QP%u, cm_id = %p. \n",
-						nesqp->hwqp.qp_id, cm_id);
-			} else {
+				nes_debug(NES_DBG_CM, "Generating a CM "
+					"Disconnect Event (status reset) for "
+					"QP%u, cm_id = %p. \n",
+					nesqp->hwqp.qp_id, cm_id);
+			} else
 				cm_event.status = IW_CM_EVENT_STATUS_OK;
-			}
 
 			cm_event.local_addr = cm_id->local_addr;
 			cm_event.remote_addr = cm_id->remote_addr;
 			cm_event.private_data = NULL;
 			cm_event.private_data_len = 0;
 
-			nes_debug(NES_DBG_CM, "Generating a CM Disconnect Event for "
-					" QP%u, SQ Head = %u, SQ Tail = %u. cm_id = %p, refcount = %u.\n",
-					nesqp->hwqp.qp_id,
-					nesqp->hwqp.sq_head, nesqp->hwqp.sq_tail, cm_id,
-					atomic_read(&nesqp->refcount));
+			nes_debug(NES_DBG_CM, "Generating a CM Disconnect Event"
+				" for  QP%u, SQ Head = %u, SQ Tail = %u. "
+				"cm_id = %p, refcount = %u.\n",
+				nesqp->hwqp.qp_id, nesqp->hwqp.sq_head,
+				nesqp->hwqp.sq_tail, cm_id,
+				atomic_read(&nesqp->refcount));
 
 			spin_unlock_irqrestore(&nesqp->lock, flags);
 			ret = cm_id->event_handler(cm_id, &cm_event);
 			if (ret)
-				nes_debug(NES_DBG_CM, "OFA CM event_handler returned, ret=%d\n", ret);
+				nes_debug(NES_DBG_CM, "OFA CM event_handler "
+					"returned, ret=%d\n", ret);
 			spin_lock_irqsave(&nesqp->lock, flags);
 		}
 
@@ -2247,31 +2449,24 @@ static int nes_cm_disconn_true(struct nes_qp *nesqp)
 			if (nesqp->flush_issued == 0) {
 				nesqp->flush_issued = 1;
 				spin_unlock_irqrestore(&nesqp->lock, flags);
-				flush_wqes(nesvnic->nesdev, nesqp, NES_CQP_FLUSH_RQ, 1);
-			} else {
+				flush_wqes(nesvnic->nesdev, nesqp,
+					NES_CQP_FLUSH_RQ, 1);
+			} else
 				spin_unlock_irqrestore(&nesqp->lock, flags);
-			}
-
-			/* This reference is from either ModifyQP or the AE processing,
-					there is still a race here with modifyqp */
-			nes_rem_ref(&nesqp->ibqp);
-
 		} else {
 			cm_id = nesqp->cm_id;
 			spin_unlock_irqrestore(&nesqp->lock, flags);
 			/* check to see if the inbound reset beat the outbound reset */
 			if ((!cm_id) && (last_ae==NES_AEQE_AEID_RESET_SENT)) {
-				nes_debug(NES_DBG_CM, "QP%u: Decing refcount due to inbound reset"
-						" beating the outbound reset.\n",
-						nesqp->hwqp.qp_id);
-				nes_rem_ref(&nesqp->ibqp);
+				nes_debug(NES_DBG_CM, "QP%u: Decing refcount "
+					"due to inbound reset beating the "
+					"outbound reset.\n", nesqp->hwqp.qp_id);
 			}
 		}
 	} else {
 		nesqp->disconn_pending = 0;
 		spin_unlock_irqrestore(&nesqp->lock, flags);
 	}
-	nes_rem_ref(&nesqp->ibqp);
 
 	return 0;
 }
@@ -2349,71 +2544,82 @@ int nes_accept(struct iw_cm_id *cm_id, struct iw_cm_conn_param *conn_param)
 	nesdev = nesvnic->nesdev;
 	adapter = nesdev->nesadapter;
 
-	nes_debug(NES_DBG_CM, "nesvnic=%p, netdev=%p, %s\n",
-			nesvnic, nesvnic->netdev, nesvnic->netdev->name);
-
-	/* since this is from a listen, we were able to put node handle into cm_id */
 	cm_node = (struct nes_cm_node *)cm_id->provider_data;
+	nes_debug(NES_DBG_CM, "nes_accept: cm_node= %p nesvnic=%p, netdev=%p,"
+		"%s\n", cm_node, nesvnic, nesvnic->netdev,
+		nesvnic->netdev->name);
 
 	/* associate the node with the QP */
 	nesqp->cm_node = (void *)cm_node;
+	cm_node->nesqp = nesqp;
+	nes_add_ref(&nesqp->ibqp);
 
-	nes_debug(NES_DBG_CM, "QP%u, cm_node=%p, jiffies = %lu\n",
-			nesqp->hwqp.qp_id, cm_node, jiffies);
+	nes_debug(NES_DBG_CM, "QP%u, cm_node=%p, jiffies = %lu listener = %p\n",
+		nesqp->hwqp.qp_id, cm_node, jiffies, cm_node->listener);
 	atomic_inc(&cm_accepts);
 
 	nes_debug(NES_DBG_CM, "netdev refcnt = %u.\n",
 			atomic_read(&nesvnic->netdev->refcnt));
 
-		/* allocate the ietf frame and space for private data */
-		nesqp->ietf_frame = pci_alloc_consistent(nesdev->pcidev,
-				sizeof(struct ietf_mpa_frame) + conn_param->private_data_len,
-				&nesqp->ietf_frame_pbase);
-
-		if (!nesqp->ietf_frame) {
-			nes_debug(NES_DBG_CM, "Unable to allocate memory for private data\n");
-			return -ENOMEM;
-		}
+	/* allocate the ietf frame and space for private data */
+	nesqp->ietf_frame = pci_alloc_consistent(nesdev->pcidev,
+		sizeof(struct ietf_mpa_frame) + conn_param->private_data_len,
+		&nesqp->ietf_frame_pbase);
 
+	if (!nesqp->ietf_frame) {
+		nes_debug(NES_DBG_CM, "Unable to allocate memory for private "
+			"data\n");
+		return -ENOMEM;
+	}
 
-		/* setup the MPA frame */
-		nesqp->private_data_len = conn_param->private_data_len;
-		memcpy(nesqp->ietf_frame->key, IEFT_MPA_KEY_REP, IETF_MPA_KEY_SIZE);
 
-		memcpy(nesqp->ietf_frame->priv_data, conn_param->private_data,
-				conn_param->private_data_len);
+	/* setup the MPA frame */
+	nesqp->private_data_len = conn_param->private_data_len;
+	memcpy(nesqp->ietf_frame->key, IEFT_MPA_KEY_REP, IETF_MPA_KEY_SIZE);
 
-		nesqp->ietf_frame->priv_data_len = cpu_to_be16(conn_param->private_data_len);
-		nesqp->ietf_frame->rev = mpa_version;
-		nesqp->ietf_frame->flags = IETF_MPA_FLAGS_CRC;
+	memcpy(nesqp->ietf_frame->priv_data, conn_param->private_data,
+			conn_param->private_data_len);
 
-		/* setup our first outgoing iWarp send WQE (the IETF frame response) */
-		wqe = &nesqp->hwqp.sq_vbase[0];
+	nesqp->ietf_frame->priv_data_len =
+		cpu_to_be16(conn_param->private_data_len);
+	nesqp->ietf_frame->rev = mpa_version;
+	nesqp->ietf_frame->flags = IETF_MPA_FLAGS_CRC;
 
-		if (cm_id->remote_addr.sin_addr.s_addr != cm_id->local_addr.sin_addr.s_addr) {
-			u64temp = (unsigned long)nesqp;
-			u64temp |= NES_SW_CONTEXT_ALIGN>>1;
-			set_wqe_64bit_value(wqe->wqe_words, NES_IWARP_SQ_WQE_COMP_CTX_LOW_IDX,
-					    u64temp);
-			wqe->wqe_words[NES_IWARP_SQ_WQE_MISC_IDX] =
-					cpu_to_le32(NES_IWARP_SQ_WQE_STREAMING | NES_IWARP_SQ_WQE_WRPDU);
-			wqe->wqe_words[NES_IWARP_SQ_WQE_TOTAL_PAYLOAD_IDX] =
-					cpu_to_le32(conn_param->private_data_len + sizeof(struct ietf_mpa_frame));
-			wqe->wqe_words[NES_IWARP_SQ_WQE_FRAG0_LOW_IDX] =
-					cpu_to_le32((u32)nesqp->ietf_frame_pbase);
-			wqe->wqe_words[NES_IWARP_SQ_WQE_FRAG0_HIGH_IDX] =
-					cpu_to_le32((u32)((u64)nesqp->ietf_frame_pbase >> 32));
-			wqe->wqe_words[NES_IWARP_SQ_WQE_LENGTH0_IDX] =
-					cpu_to_le32(conn_param->private_data_len + sizeof(struct ietf_mpa_frame));
-			wqe->wqe_words[NES_IWARP_SQ_WQE_STAG0_IDX] = 0;
-
-			nesqp->nesqp_context->ird_ord_sizes |= cpu_to_le32(
-					NES_QPCONTEXT_ORDIRD_LSMM_PRESENT | NES_QPCONTEXT_ORDIRD_WRPDU);
-		} else {
-			nesqp->nesqp_context->ird_ord_sizes |= cpu_to_le32((NES_QPCONTEXT_ORDIRD_LSMM_PRESENT |
-					NES_QPCONTEXT_ORDIRD_WRPDU | NES_QPCONTEXT_ORDIRD_ALSMM));
-		}
-		nesqp->skip_lsmm = 1;
+	/* setup our first outgoing iWarp send WQE (the IETF frame response) */
+	wqe = &nesqp->hwqp.sq_vbase[0];
+
+	if (cm_id->remote_addr.sin_addr.s_addr !=
+			cm_id->local_addr.sin_addr.s_addr) {
+		u64temp = (unsigned long)nesqp;
+		u64temp |= NES_SW_CONTEXT_ALIGN>>1;
+		set_wqe_64bit_value(wqe->wqe_words,
+			NES_IWARP_SQ_WQE_COMP_CTX_LOW_IDX,
+			u64temp);
+		wqe->wqe_words[NES_IWARP_SQ_WQE_MISC_IDX] =
+			cpu_to_le32(NES_IWARP_SQ_WQE_STREAMING |
+			NES_IWARP_SQ_WQE_WRPDU);
+		wqe->wqe_words[NES_IWARP_SQ_WQE_TOTAL_PAYLOAD_IDX] =
+			cpu_to_le32(conn_param->private_data_len +
+			sizeof(struct ietf_mpa_frame));
+		wqe->wqe_words[NES_IWARP_SQ_WQE_FRAG0_LOW_IDX] =
+			cpu_to_le32((u32)nesqp->ietf_frame_pbase);
+		wqe->wqe_words[NES_IWARP_SQ_WQE_FRAG0_HIGH_IDX] =
+			cpu_to_le32((u32)((u64)nesqp->ietf_frame_pbase >> 32));
+		wqe->wqe_words[NES_IWARP_SQ_WQE_LENGTH0_IDX] =
+			cpu_to_le32(conn_param->private_data_len +
+			sizeof(struct ietf_mpa_frame));
+		wqe->wqe_words[NES_IWARP_SQ_WQE_STAG0_IDX] = 0;
+
+		nesqp->nesqp_context->ird_ord_sizes |=
+			cpu_to_le32(NES_QPCONTEXT_ORDIRD_LSMM_PRESENT |
+			NES_QPCONTEXT_ORDIRD_WRPDU);
+	} else {
+		nesqp->nesqp_context->ird_ord_sizes |=
+			cpu_to_le32((NES_QPCONTEXT_ORDIRD_LSMM_PRESENT |
+			NES_QPCONTEXT_ORDIRD_WRPDU |
+			NES_QPCONTEXT_ORDIRD_ALSMM));
+	}
+	nesqp->skip_lsmm = 1;
 
 
 	/* Cache the cm_id in the qp */
@@ -2424,55 +2630,75 @@ int nes_accept(struct iw_cm_id *cm_id, struct iw_cm_conn_param *conn_param)
 	cm_id->provider_data = nesqp;
 	nesqp->active_conn   = 0;
 
+	if (cm_node->state == NES_CM_STATE_TSA)
+		nes_debug(NES_DBG_CM, "Already state = TSA for cm_node=%p\n",
+			cm_node);
+
 	nes_cm_init_tsa_conn(nesqp, cm_node);
 
-	nesqp->nesqp_context->tcpPorts[0] = cpu_to_le16(ntohs(cm_id->local_addr.sin_port));
-	nesqp->nesqp_context->tcpPorts[1] = cpu_to_le16(ntohs(cm_id->remote_addr.sin_port));
-	nesqp->nesqp_context->ip0 = cpu_to_le32(ntohl(cm_id->remote_addr.sin_addr.s_addr));
+	nesqp->nesqp_context->tcpPorts[0] =
+		cpu_to_le16(ntohs(cm_id->local_addr.sin_port));
+	nesqp->nesqp_context->tcpPorts[1] =
+		cpu_to_le16(ntohs(cm_id->remote_addr.sin_port));
+
+	if (ipv4_is_loopback(cm_id->remote_addr.sin_addr.s_addr))
+		nesqp->nesqp_context->ip0 =
+			cpu_to_le32(ntohl(nesvnic->local_ipaddr));
+	else
+		nesqp->nesqp_context->ip0 =
+			cpu_to_le32(ntohl(cm_id->remote_addr.sin_addr.s_addr));
 
 	nesqp->nesqp_context->misc2 |= cpu_to_le32(
-			(u32)PCI_FUNC(nesdev->pcidev->devfn) << NES_QPCONTEXT_MISC2_SRC_IP_SHIFT);
+			(u32)PCI_FUNC(nesdev->pcidev->devfn) <<
+			NES_QPCONTEXT_MISC2_SRC_IP_SHIFT);
 
-	nesqp->nesqp_context->arp_index_vlan |= cpu_to_le32(
-			nes_arp_table(nesdev, le32_to_cpu(nesqp->nesqp_context->ip0), NULL,
+	nesqp->nesqp_context->arp_index_vlan |=
+		cpu_to_le32(nes_arp_table(nesdev,
+			le32_to_cpu(nesqp->nesqp_context->ip0), NULL,
 			NES_ARP_RESOLVE) << 16);
 
 	nesqp->nesqp_context->ts_val_delta = cpu_to_le32(
-			jiffies - nes_read_indexed(nesdev, NES_IDX_TCP_NOW));
+		jiffies - nes_read_indexed(nesdev, NES_IDX_TCP_NOW));
 
 	nesqp->nesqp_context->ird_index = cpu_to_le32(nesqp->hwqp.qp_id);
 
 	nesqp->nesqp_context->ird_ord_sizes |= cpu_to_le32(
-			((u32)1 << NES_QPCONTEXT_ORDIRD_IWARP_MODE_SHIFT));
-	nesqp->nesqp_context->ird_ord_sizes |= cpu_to_le32((u32)conn_param->ord);
+		((u32)1 << NES_QPCONTEXT_ORDIRD_IWARP_MODE_SHIFT));
+	nesqp->nesqp_context->ird_ord_sizes |=
+		cpu_to_le32((u32)conn_param->ord);
 
 	memset(&nes_quad, 0, sizeof(nes_quad));
-	nes_quad.DstIpAdrIndex = cpu_to_le32((u32)PCI_FUNC(nesdev->pcidev->devfn) << 24);
-	nes_quad.SrcIpadr      = cm_id->remote_addr.sin_addr.s_addr;
-	nes_quad.TcpPorts[0]   = cm_id->remote_addr.sin_port;
-	nes_quad.TcpPorts[1]   = cm_id->local_addr.sin_port;
+	nes_quad.DstIpAdrIndex =
+		cpu_to_le32((u32)PCI_FUNC(nesdev->pcidev->devfn) << 24);
+	if (ipv4_is_loopback(cm_id->remote_addr.sin_addr.s_addr))
+		nes_quad.SrcIpadr = nesvnic->local_ipaddr;
+	else
+		nes_quad.SrcIpadr = cm_id->remote_addr.sin_addr.s_addr;
+	nes_quad.TcpPorts[0] = cm_id->remote_addr.sin_port;
+	nes_quad.TcpPorts[1] = cm_id->local_addr.sin_port;
 
 	/* Produce hash key */
 	crc_value = get_crc_value(&nes_quad);
 	nesqp->hte_index = cpu_to_be32(crc_value ^ 0xffffffff);
 	nes_debug(NES_DBG_CM, "HTE Index = 0x%08X, CRC = 0x%08X\n",
-			nesqp->hte_index, nesqp->hte_index & adapter->hte_index_mask);
+		nesqp->hte_index, nesqp->hte_index & adapter->hte_index_mask);
 
 	nesqp->hte_index &= adapter->hte_index_mask;
 	nesqp->nesqp_context->hte_index = cpu_to_le32(nesqp->hte_index);
 
 	cm_node->cm_core->api->accelerated(cm_node->cm_core, cm_node);
 
-	nes_debug(NES_DBG_CM, "QP%u, Destination IP = 0x%08X:0x%04X, local = 0x%08X:0x%04X,"
-			" rcv_nxt=0x%08X, snd_nxt=0x%08X, mpa + private data length=%zu.\n",
-			nesqp->hwqp.qp_id,
+	nes_debug(NES_DBG_CM, "QP%u, Destination IP = 0x%08X:0x%04X, local = "
+			"0x%08X:0x%04X, rcv_nxt=0x%08X, snd_nxt=0x%08X, mpa + "
+			"private data length=%zu.\n", nesqp->hwqp.qp_id,
 			ntohl(cm_id->remote_addr.sin_addr.s_addr),
 			ntohs(cm_id->remote_addr.sin_port),
 			ntohl(cm_id->local_addr.sin_addr.s_addr),
 			ntohs(cm_id->local_addr.sin_port),
 			le32_to_cpu(nesqp->nesqp_context->rcv_nxt),
 			le32_to_cpu(nesqp->nesqp_context->snd_nxt),
-			conn_param->private_data_len+sizeof(struct ietf_mpa_frame));
+			conn_param->private_data_len +
+			sizeof(struct ietf_mpa_frame));
 
 	attr.qp_state = IB_QPS_RTS;
 	nes_modify_qp(&nesqp->ibqp, &attr, IB_QP_STATE, NULL);
@@ -2489,15 +2715,16 @@ int nes_accept(struct iw_cm_id *cm_id, struct iw_cm_conn_param *conn_param)
 	cm_event.private_data_len = 0;
 	ret = cm_id->event_handler(cm_id, &cm_event);
 	if (cm_node->loopbackpartner) {
-		cm_node->loopbackpartner->mpa_frame_size = nesqp->private_data_len;
+		cm_node->loopbackpartner->mpa_frame_size =
+			nesqp->private_data_len;
 		/* copy entire MPA frame to our cm_node's frame */
-		memcpy(cm_node->loopbackpartner->mpa_frame_buf, nesqp->ietf_frame->priv_data,
-			   nesqp->private_data_len);
+		memcpy(cm_node->loopbackpartner->mpa_frame_buf,
+			nesqp->ietf_frame->priv_data, nesqp->private_data_len);
 		create_event(cm_node->loopbackpartner, NES_CM_EVENT_CONNECTED);
 	}
 	if (ret)
-		printk("%s[%u] OFA CM event_handler returned, ret=%d\n",
-				__func__, __LINE__, ret);
+		printk(KERN_ERR "%s[%u] OFA CM event_handler returned, "
+			"ret=%d\n", __func__, __LINE__, ret);
 
 	return 0;
 }
@@ -2555,74 +2782,61 @@ int nes_connect(struct iw_cm_id *cm_id, struct iw_cm_conn_param *conn_param)
 	if (!nesdev)
 		return -EINVAL;
 
-	atomic_inc(&cm_connects);
-
-	nesqp->ietf_frame = kzalloc(sizeof(struct ietf_mpa_frame) +
-			conn_param->private_data_len, GFP_KERNEL);
-	if (!nesqp->ietf_frame)
-		return -ENOMEM;
+	nes_debug(NES_DBG_CM, "QP%u, current IP = 0x%08X, Destination IP = "
+		"0x%08X:0x%04X, local = 0x%08X:0x%04X.\n", nesqp->hwqp.qp_id,
+		ntohl(nesvnic->local_ipaddr),
+		ntohl(cm_id->remote_addr.sin_addr.s_addr),
+		ntohs(cm_id->remote_addr.sin_port),
+		ntohl(cm_id->local_addr.sin_addr.s_addr),
+		ntohs(cm_id->local_addr.sin_port));
 
-	/* set qp as having an active connection */
+	atomic_inc(&cm_connects);
 	nesqp->active_conn = 1;
 
-	nes_debug(NES_DBG_CM, "QP%u, Destination IP = 0x%08X:0x%04X, local = 0x%08X:0x%04X.\n",
-			nesqp->hwqp.qp_id,
-			ntohl(cm_id->remote_addr.sin_addr.s_addr),
-			ntohs(cm_id->remote_addr.sin_port),
-			ntohl(cm_id->local_addr.sin_addr.s_addr),
-			ntohs(cm_id->local_addr.sin_port));
-
 	/* cache the cm_id in the qp */
 	nesqp->cm_id = cm_id;
 
 	cm_id->provider_data = nesqp;
 
-	/* copy the private data */
-	if (conn_param->private_data_len) {
-		memcpy(nesqp->ietf_frame->priv_data, conn_param->private_data,
-				conn_param->private_data_len);
-	}
-
 	nesqp->private_data_len = conn_param->private_data_len;
 	nesqp->nesqp_context->ird_ord_sizes |= cpu_to_le32((u32)conn_param->ord);
 	nes_debug(NES_DBG_CM, "requested ord = 0x%08X.\n", (u32)conn_param->ord);
-	nes_debug(NES_DBG_CM, "mpa private data len =%u\n", conn_param->private_data_len);
-
-	strcpy(&nesqp->ietf_frame->key[0], IEFT_MPA_KEY_REQ);
-	nesqp->ietf_frame->flags = IETF_MPA_FLAGS_CRC;
-	nesqp->ietf_frame->rev = IETF_MPA_VERSION;
-	nesqp->ietf_frame->priv_data_len = htons(conn_param->private_data_len);
+	nes_debug(NES_DBG_CM, "mpa private data len =%u\n",
+		conn_param->private_data_len);
 
-	if (cm_id->local_addr.sin_addr.s_addr != cm_id->remote_addr.sin_addr.s_addr)
+	if (cm_id->local_addr.sin_addr.s_addr !=
+		cm_id->remote_addr.sin_addr.s_addr)
 		nes_manage_apbvt(nesvnic, ntohs(cm_id->local_addr.sin_port),
-				PCI_FUNC(nesdev->pcidev->devfn), NES_MANAGE_APBVT_ADD);
+			PCI_FUNC(nesdev->pcidev->devfn), NES_MANAGE_APBVT_ADD);
 
 	/* set up the connection params for the node */
-	cm_info.loc_addr = (cm_id->local_addr.sin_addr.s_addr);
-	cm_info.loc_port = (cm_id->local_addr.sin_port);
-	cm_info.rem_addr = (cm_id->remote_addr.sin_addr.s_addr);
-	cm_info.rem_port = (cm_id->remote_addr.sin_port);
+	cm_info.loc_addr = htonl(cm_id->local_addr.sin_addr.s_addr);
+	cm_info.loc_port = htons(cm_id->local_addr.sin_port);
+	cm_info.rem_addr = htonl(cm_id->remote_addr.sin_addr.s_addr);
+	cm_info.rem_port = htons(cm_id->remote_addr.sin_port);
 	cm_info.cm_id = cm_id;
 	cm_info.conn_type = NES_CM_IWARP_CONN_TYPE;
 
 	cm_id->add_ref(cm_id);
-	nes_add_ref(&nesqp->ibqp);
 
 	/* create a connect CM node connection */
-	cm_node = g_cm_core->api->connect(g_cm_core, nesvnic, nesqp->ietf_frame, &cm_info);
+	cm_node = g_cm_core->api->connect(g_cm_core, nesvnic,
+		conn_param->private_data_len, (void *)conn_param->private_data,
+		&cm_info);
 	if (!cm_node) {
-		if (cm_id->local_addr.sin_addr.s_addr != cm_id->remote_addr.sin_addr.s_addr)
+		if (cm_id->local_addr.sin_addr.s_addr !=
+				cm_id->remote_addr.sin_addr.s_addr)
 			nes_manage_apbvt(nesvnic, ntohs(cm_id->local_addr.sin_port),
-					PCI_FUNC(nesdev->pcidev->devfn), NES_MANAGE_APBVT_DEL);
-		nes_rem_ref(&nesqp->ibqp);
-		kfree(nesqp->ietf_frame);
-		nesqp->ietf_frame = NULL;
+				PCI_FUNC(nesdev->pcidev->devfn),
+				NES_MANAGE_APBVT_DEL);
+
 		cm_id->rem_ref(cm_id);
 		return -ENOMEM;
 	}
 
 	cm_node->apbvt_set = 1;
 	nesqp->cm_node = cm_node;
+	cm_node->nesqp = nesqp;
 
 	return 0;
 }
@@ -2664,7 +2878,7 @@ int nes_create_listen(struct iw_cm_id *cm_id, int backlog)
 
 	cm_node = g_cm_core->api->listen(g_cm_core, nesvnic, &cm_info);
 	if (!cm_node) {
-		printk("%s[%u] Error returned from listen API call\n",
+		printk(KERN_ERR "%s[%u] Error returned from listen API call\n",
 				__func__, __LINE__);
 		return -ENOMEM;
 	}
@@ -2672,10 +2886,13 @@ int nes_create_listen(struct iw_cm_id *cm_id, int backlog)
 	cm_id->provider_data = cm_node;
 
 	if (!cm_node->reused_node) {
-		err = nes_manage_apbvt(nesvnic, ntohs(cm_id->local_addr.sin_port),
-				PCI_FUNC(nesvnic->nesdev->pcidev->devfn), NES_MANAGE_APBVT_ADD);
+		err = nes_manage_apbvt(nesvnic,
+			ntohs(cm_id->local_addr.sin_port),
+			PCI_FUNC(nesvnic->nesdev->pcidev->devfn),
+			NES_MANAGE_APBVT_ADD);
 		if (err) {
-			printk("nes_manage_apbvt call returned %d.\n", err);
+			printk(KERN_ERR "nes_manage_apbvt call returned %d.\n",
+				err);
 			g_cm_core->api->stop_listener(g_cm_core, (void *)cm_node);
 			return err;
 		}
@@ -2795,53 +3012,70 @@ static void cm_event_connected(struct nes_cm_event *event)
 	nes_cm_init_tsa_conn(nesqp, cm_node);
 
 	/* set the QP tsa context */
-	nesqp->nesqp_context->tcpPorts[0] = cpu_to_le16(ntohs(cm_id->local_addr.sin_port));
-	nesqp->nesqp_context->tcpPorts[1] = cpu_to_le16(ntohs(cm_id->remote_addr.sin_port));
-	nesqp->nesqp_context->ip0 = cpu_to_le32(ntohl(cm_id->remote_addr.sin_addr.s_addr));
+	nesqp->nesqp_context->tcpPorts[0] =
+		cpu_to_le16(ntohs(cm_id->local_addr.sin_port));
+	nesqp->nesqp_context->tcpPorts[1] =
+		cpu_to_le16(ntohs(cm_id->remote_addr.sin_port));
+	if (ipv4_is_loopback(cm_id->remote_addr.sin_addr.s_addr))
+		nesqp->nesqp_context->ip0 =
+			cpu_to_le32(ntohl(nesvnic->local_ipaddr));
+	else
+		nesqp->nesqp_context->ip0 =
+			cpu_to_le32(ntohl(cm_id->remote_addr.sin_addr.s_addr));
 
 	nesqp->nesqp_context->misc2 |= cpu_to_le32(
-			(u32)PCI_FUNC(nesdev->pcidev->devfn) << NES_QPCONTEXT_MISC2_SRC_IP_SHIFT);
+			(u32)PCI_FUNC(nesdev->pcidev->devfn) <<
+			NES_QPCONTEXT_MISC2_SRC_IP_SHIFT);
 	nesqp->nesqp_context->arp_index_vlan |= cpu_to_le32(
-			nes_arp_table(nesdev, le32_to_cpu(nesqp->nesqp_context->ip0),
+			nes_arp_table(nesdev,
+			le32_to_cpu(nesqp->nesqp_context->ip0),
 			NULL, NES_ARP_RESOLVE) << 16);
 	nesqp->nesqp_context->ts_val_delta = cpu_to_le32(
 			jiffies - nes_read_indexed(nesdev, NES_IDX_TCP_NOW));
 	nesqp->nesqp_context->ird_index = cpu_to_le32(nesqp->hwqp.qp_id);
 	nesqp->nesqp_context->ird_ord_sizes |=
-			cpu_to_le32((u32)1 << NES_QPCONTEXT_ORDIRD_IWARP_MODE_SHIFT);
+			cpu_to_le32((u32)1 <<
+			NES_QPCONTEXT_ORDIRD_IWARP_MODE_SHIFT);
 
 	/* Adjust tail for not having a LSMM */
 	nesqp->hwqp.sq_tail = 1;
 
 #if defined(NES_SEND_FIRST_WRITE)
-		if (cm_node->send_write0) {
-			nes_debug(NES_DBG_CM, "Sending first write.\n");
-			wqe = &nesqp->hwqp.sq_vbase[0];
-			u64temp = (unsigned long)nesqp;
-			u64temp |= NES_SW_CONTEXT_ALIGN>>1;
-			set_wqe_64bit_value(wqe->wqe_words, NES_IWARP_SQ_WQE_COMP_CTX_LOW_IDX,
-					    u64temp);
-			wqe->wqe_words[NES_IWARP_SQ_WQE_MISC_IDX] = cpu_to_le32(NES_IWARP_SQ_OP_RDMAW);
-			wqe->wqe_words[NES_IWARP_SQ_WQE_TOTAL_PAYLOAD_IDX] = 0;
-			wqe->wqe_words[NES_IWARP_SQ_WQE_FRAG0_LOW_IDX] = 0;
-			wqe->wqe_words[NES_IWARP_SQ_WQE_FRAG0_HIGH_IDX] = 0;
-			wqe->wqe_words[NES_IWARP_SQ_WQE_LENGTH0_IDX] = 0;
-			wqe->wqe_words[NES_IWARP_SQ_WQE_STAG0_IDX] = 0;
-
-			/* use the reserved spot on the WQ for the extra first WQE */
-			nesqp->nesqp_context->ird_ord_sizes &= cpu_to_le32(~(NES_QPCONTEXT_ORDIRD_LSMM_PRESENT |
-					NES_QPCONTEXT_ORDIRD_WRPDU | NES_QPCONTEXT_ORDIRD_ALSMM));
-			nesqp->skip_lsmm = 1;
-			nesqp->hwqp.sq_tail = 0;
-			nes_write32(nesdev->regs + NES_WQE_ALLOC,
-					(1 << 24) | 0x00800000 | nesqp->hwqp.qp_id);
-		}
+	if (cm_node->send_write0) {
+		nes_debug(NES_DBG_CM, "Sending first write.\n");
+		wqe = &nesqp->hwqp.sq_vbase[0];
+		u64temp = (unsigned long)nesqp;
+		u64temp |= NES_SW_CONTEXT_ALIGN>>1;
+		set_wqe_64bit_value(wqe->wqe_words,
+				NES_IWARP_SQ_WQE_COMP_CTX_LOW_IDX, u64temp);
+		wqe->wqe_words[NES_IWARP_SQ_WQE_MISC_IDX] =
+			cpu_to_le32(NES_IWARP_SQ_OP_RDMAW);
+		wqe->wqe_words[NES_IWARP_SQ_WQE_TOTAL_PAYLOAD_IDX] = 0;
+		wqe->wqe_words[NES_IWARP_SQ_WQE_FRAG0_LOW_IDX] = 0;
+		wqe->wqe_words[NES_IWARP_SQ_WQE_FRAG0_HIGH_IDX] = 0;
+		wqe->wqe_words[NES_IWARP_SQ_WQE_LENGTH0_IDX] = 0;
+		wqe->wqe_words[NES_IWARP_SQ_WQE_STAG0_IDX] = 0;
+
+		/* use the reserved spot on the WQ for the extra first WQE */
+		nesqp->nesqp_context->ird_ord_sizes &=
+			cpu_to_le32(~(NES_QPCONTEXT_ORDIRD_LSMM_PRESENT |
+						NES_QPCONTEXT_ORDIRD_WRPDU |
+						NES_QPCONTEXT_ORDIRD_ALSMM));
+		nesqp->skip_lsmm = 1;
+		nesqp->hwqp.sq_tail = 0;
+		nes_write32(nesdev->regs + NES_WQE_ALLOC,
+				(1 << 24) | 0x00800000 | nesqp->hwqp.qp_id);
+	}
 #endif
 
 	memset(&nes_quad, 0, sizeof(nes_quad));
 
-	nes_quad.DstIpAdrIndex = cpu_to_le32((u32)PCI_FUNC(nesdev->pcidev->devfn) << 24);
-	nes_quad.SrcIpadr = cm_id->remote_addr.sin_addr.s_addr;
+	nes_quad.DstIpAdrIndex =
+		cpu_to_le32((u32)PCI_FUNC(nesdev->pcidev->devfn) << 24);
+	if (ipv4_is_loopback(cm_id->remote_addr.sin_addr.s_addr))
+		nes_quad.SrcIpadr = nesvnic->local_ipaddr;
+	else
+		nes_quad.SrcIpadr = cm_id->remote_addr.sin_addr.s_addr;
 	nes_quad.TcpPorts[0] = cm_id->remote_addr.sin_port;
 	nes_quad.TcpPorts[1] = cm_id->local_addr.sin_port;
 
@@ -2858,10 +3092,6 @@ static void cm_event_connected(struct nes_cm_event *event)
 	nesqp->private_data_len = (u8) cm_node->mpa_frame_size;
 	cm_node->cm_core->api->accelerated(cm_node->cm_core, cm_node);
 
-	/* modify QP state to rts */
-	attr.qp_state = IB_QPS_RTS;
-	nes_modify_qp(&nesqp->ibqp, &attr, IB_QP_STATE, NULL);
-
 	/* notify OF layer we successfully created the requested connection */
 	cm_event.event = IW_CM_EVENT_CONNECT_REPLY;
 	cm_event.status = IW_CM_EVENT_STATUS_ACCEPTED;
@@ -2870,20 +3100,21 @@ static void cm_event_connected(struct nes_cm_event *event)
 	cm_event.local_addr.sin_port = cm_id->local_addr.sin_port;
 	cm_event.remote_addr = cm_id->remote_addr;
 
-		cm_event.private_data = (void *)event->cm_node->mpa_frame_buf;
-		cm_event.private_data_len = (u8) event->cm_node->mpa_frame_size;
+	cm_event.private_data = (void *)event->cm_node->mpa_frame_buf;
+	cm_event.private_data_len = (u8) event->cm_node->mpa_frame_size;
 
 	cm_event.local_addr.sin_addr.s_addr = event->cm_info.rem_addr;
 	ret = cm_id->event_handler(cm_id, &cm_event);
 	nes_debug(NES_DBG_CM, "OFA CM event_handler returned, ret=%d\n", ret);
 
 	if (ret)
-		printk("%s[%u] OFA CM event_handler returned, ret=%d\n",
-				__func__, __LINE__, ret);
-	nes_debug(NES_DBG_CM, "Exiting connect thread for QP%u. jiffies = %lu\n",
-			nesqp->hwqp.qp_id, jiffies );
+		printk(KERN_ERR "%s[%u] OFA CM event_handler returned, "
+			"ret=%d\n", __func__, __LINE__, ret);
+	attr.qp_state = IB_QPS_RTS;
+	nes_modify_qp(&nesqp->ibqp, &attr, IB_QP_STATE, NULL);
 
-	nes_rem_ref(&nesqp->ibqp);
+	nes_debug(NES_DBG_CM, "Exiting connect thread for QP%u. jiffies = "
+		"%lu\n", nesqp->hwqp.qp_id, jiffies);
 
 	return;
 }
@@ -2927,17 +3158,19 @@ static void cm_event_connect_error(struct nes_cm_event *event)
 	cm_event.private_data = NULL;
 	cm_event.private_data_len = 0;
 
-	nes_debug(NES_DBG_CM, "call CM_EVENT REJECTED, local_addr=%08x, remove_addr=%08x\n",
-			cm_event.local_addr.sin_addr.s_addr, cm_event.remote_addr.sin_addr.s_addr);
+	nes_debug(NES_DBG_CM, "call CM_EVENT REJECTED, local_addr=%08x, "
+		"remove_addr=%08x\n", cm_event.local_addr.sin_addr.s_addr,
+		cm_event.remote_addr.sin_addr.s_addr);
 
 	ret = cm_id->event_handler(cm_id, &cm_event);
 	nes_debug(NES_DBG_CM, "OFA CM event_handler returned, ret=%d\n", ret);
 	if (ret)
-		printk("%s[%u] OFA CM event_handler returned, ret=%d\n",
-				__func__, __LINE__, ret);
+		printk(KERN_ERR "%s[%u] OFA CM event_handler returned, "
+			"ret=%d\n", __func__, __LINE__, ret);
 	nes_rem_ref(&nesqp->ibqp);
-		cm_id->rem_ref(cm_id);
+	cm_id->rem_ref(cm_id);
 
+	rem_ref_cm_node(event->cm_node->cm_core, event->cm_node);
 	return;
 }
 
@@ -3040,7 +3273,8 @@ static int nes_cm_post_event(struct nes_cm_event *event)
 	add_ref_cm_node(event->cm_node);
 	event->cm_info.cm_id->add_ref(event->cm_info.cm_id);
 	INIT_WORK(&event->event_work, nes_cm_event_handler);
-	nes_debug(NES_DBG_CM, "queue_work, event=%p\n", event);
+	nes_debug(NES_DBG_CM, "cm_node=%p queue_work, event=%p\n",
+		event->cm_node, event);
 
 	queue_work(event->cm_node->cm_core->event_wq, &event->event_work);
 
@@ -3056,46 +3290,48 @@ static int nes_cm_post_event(struct nes_cm_event *event)
  */
 static void nes_cm_event_handler(struct work_struct *work)
 {
-	struct nes_cm_event *event = container_of(work, struct nes_cm_event, event_work);
+	struct nes_cm_event *event = container_of(work, struct nes_cm_event,
+			event_work);
 	struct nes_cm_core *cm_core;
 
-	if ((!event) || (!event->cm_node) || (!event->cm_node->cm_core)) {
+	if ((!event) || (!event->cm_node) || (!event->cm_node->cm_core))
 		return;
-	}
+
 	cm_core = event->cm_node->cm_core;
 	nes_debug(NES_DBG_CM, "event=%p, event->type=%u, events posted=%u\n",
-			event, event->type, atomic_read(&cm_core->events_posted));
+		event, event->type, atomic_read(&cm_core->events_posted));
 
 	switch (event->type) {
-		case NES_CM_EVENT_MPA_REQ:
-			cm_event_mpa_req(event);
-			nes_debug(NES_DBG_CM, "CM Event: MPA REQUEST\n");
-			break;
-		case NES_CM_EVENT_RESET:
-			nes_debug(NES_DBG_CM, "CM Event: RESET\n");
-			cm_event_reset(event);
-			break;
-		case NES_CM_EVENT_CONNECTED:
-			if ((!event->cm_node->cm_id) ||
-				(event->cm_node->state != NES_CM_STATE_TSA)) {
-				break;
-			}
-			cm_event_connected(event);
-			nes_debug(NES_DBG_CM, "CM Event: CONNECTED\n");
+	case NES_CM_EVENT_MPA_REQ:
+		cm_event_mpa_req(event);
+		nes_debug(NES_DBG_CM, "cm_node=%p CM Event: MPA REQUEST\n",
+			event->cm_node);
+		break;
+	case NES_CM_EVENT_RESET:
+		nes_debug(NES_DBG_CM, "cm_node = %p CM Event: RESET\n",
+			event->cm_node);
+		cm_event_reset(event);
+		break;
+	case NES_CM_EVENT_CONNECTED:
+		if ((!event->cm_node->cm_id) ||
+			(event->cm_node->state != NES_CM_STATE_TSA))
 			break;
-		case NES_CM_EVENT_ABORTED:
-			if ((!event->cm_node->cm_id) || (event->cm_node->state == NES_CM_STATE_TSA)) {
-				break;
-			}
-			cm_event_connect_error(event);
-			nes_debug(NES_DBG_CM, "CM Event: ABORTED\n");
-			break;
-		case NES_CM_EVENT_DROPPED_PKT:
-			nes_debug(NES_DBG_CM, "CM Event: DROPPED PKT\n");
-			break;
-		default:
-			nes_debug(NES_DBG_CM, "CM Event: UNKNOWN EVENT TYPE\n");
+		cm_event_connected(event);
+		nes_debug(NES_DBG_CM, "CM Event: CONNECTED\n");
+		break;
+	case NES_CM_EVENT_ABORTED:
+		if ((!event->cm_node->cm_id) ||
+			(event->cm_node->state == NES_CM_STATE_TSA))
 			break;
+		cm_event_connect_error(event);
+		nes_debug(NES_DBG_CM, "CM Event: ABORTED\n");
+		break;
+	case NES_CM_EVENT_DROPPED_PKT:
+		nes_debug(NES_DBG_CM, "CM Event: DROPPED PKT\n");
+		break;
+	default:
+		nes_debug(NES_DBG_CM, "CM Event: UNKNOWN EVENT TYPE\n");
+		break;
 	}
 
 	atomic_dec(&cm_core->events_posted);
diff --git a/drivers/infiniband/hw/nes/nes_cm.h b/drivers/infiniband/hw/nes/nes_cm.h
index 7717cb2ab500..367b3d290140 100644
--- a/drivers/infiniband/hw/nes/nes_cm.h
+++ b/drivers/infiniband/hw/nes/nes_cm.h
@@ -83,6 +83,8 @@ enum nes_timer_type {
 #define SET_FIN 4
 #define SET_RST 8
 
+#define TCP_OPTIONS_PADDING	3
+
 struct option_base {
 	u8 optionnum;
 	u8 length;
@@ -177,6 +179,7 @@ enum nes_cm_node_state {
 	NES_CM_STATE_ESTABLISHED,
 	NES_CM_STATE_ACCEPTING,
 	NES_CM_STATE_MPAREQ_SENT,
+	NES_CM_STATE_MPAREQ_RCVD,
 	NES_CM_STATE_TSA,
 	NES_CM_STATE_FIN_WAIT1,
 	NES_CM_STATE_FIN_WAIT2,
@@ -187,6 +190,16 @@ enum nes_cm_node_state {
 	NES_CM_STATE_CLOSED
 };
 
+enum nes_tcpip_pkt_type {
+	NES_PKT_TYPE_UNKNOWN,
+	NES_PKT_TYPE_SYN,
+	NES_PKT_TYPE_SYNACK,
+	NES_PKT_TYPE_ACK,
+	NES_PKT_TYPE_FIN,
+	NES_PKT_TYPE_RST
+};
+
+
 /* type of nes connection */
 enum nes_cm_conn_type {
 	NES_CM_IWARP_CONN_TYPE,
@@ -257,7 +270,9 @@ struct nes_cm_node {
 	struct net_device         *netdev;
 
 	struct nes_cm_node        *loopbackpartner;
-	struct list_head          retrans_list;
+
+	struct nes_timer_entry	*send_entry;
+
 	spinlock_t                retrans_list_lock;
 	struct list_head          recv_list;
 	spinlock_t                recv_list_lock;
@@ -276,6 +291,8 @@ struct nes_cm_node {
 	struct nes_vnic           *nesvnic;
 	int                       apbvt_set;
 	int                       accept_pend;
+	int			freed;
+	struct nes_qp		*nesqp;
 };
 
 /* structure for client or CM to fill when making CM api calls. */
@@ -366,14 +383,14 @@ struct nes_cm_ops {
 			struct nes_cm_info *);
 	int (*stop_listener)(struct nes_cm_core *, struct nes_cm_listener *);
 	struct nes_cm_node * (*connect)(struct nes_cm_core *,
-			struct nes_vnic *, struct ietf_mpa_frame *,
+			struct nes_vnic *, u16, void *,
 			struct nes_cm_info *);
 	int (*close)(struct nes_cm_core *, struct nes_cm_node *);
 	int (*accept)(struct nes_cm_core *, struct ietf_mpa_frame *,
 			struct nes_cm_node *);
 	int (*reject)(struct nes_cm_core *, struct ietf_mpa_frame *,
 			struct nes_cm_node *);
-	int (*recv_pkt)(struct nes_cm_core *, struct nes_vnic *,
+	void (*recv_pkt)(struct nes_cm_core *, struct nes_vnic *,
 			struct sk_buff *);
 	int (*destroy_cm_core)(struct nes_cm_core *);
 	int (*get)(struct nes_cm_core *);
diff --git a/drivers/infiniband/hw/nes/nes_hw.c b/drivers/infiniband/hw/nes/nes_hw.c
index 85f26d19a32b..1513d4066f1b 100644
--- a/drivers/infiniband/hw/nes/nes_hw.c
+++ b/drivers/infiniband/hw/nes/nes_hw.c
@@ -2814,7 +2814,6 @@ static void nes_process_iwarp_aeqe(struct nes_device *nesdev,
 			nesqp = *((struct nes_qp **)&context);
 			if (atomic_inc_return(&nesqp->close_timer_started) == 1) {
 				nesqp->cm_id->add_ref(nesqp->cm_id);
-				nes_add_ref(&nesqp->ibqp);
 				schedule_nes_timer(nesqp->cm_node, (struct sk_buff *)nesqp,
 						NES_TIMER_TYPE_CLOSE, 1, 0);
 				nes_debug(NES_DBG_AEQ, "QP%u Not decrementing QP refcount (%d),"
@@ -2838,7 +2837,6 @@ static void nes_process_iwarp_aeqe(struct nes_device *nesdev,
 			if (async_event_id == NES_AEQE_AEID_RESET_SENT) {
 				tcp_state = NES_AEQE_TCP_STATE_CLOSED;
 			}
-			nes_add_ref(&nesqp->ibqp);
 			spin_lock_irqsave(&nesqp->lock, flags);
 			nesqp->hw_iwarp_state = iwarp_state;
 			nesqp->hw_tcp_state = tcp_state;
@@ -2876,7 +2874,6 @@ static void nes_process_iwarp_aeqe(struct nes_device *nesdev,
 				}
 				spin_unlock_irqrestore(&nesqp->lock, flags);
 				if (next_iwarp_state) {
-					nes_add_ref(&nesqp->ibqp);
 					nes_debug(NES_DBG_AEQ, "issuing hw modifyqp for QP%u. next state = 0x%08X,"
 							" also added another reference\n",
 							nesqp->hwqp.qp_id, next_iwarp_state);
@@ -2888,7 +2885,6 @@ static void nes_process_iwarp_aeqe(struct nes_device *nesdev,
 					/* FIN Received but ib state not RTS,
 							close complete will be on its way */
 					spin_unlock_irqrestore(&nesqp->lock, flags);
-					nes_rem_ref(&nesqp->ibqp);
 					return;
 				}
 				spin_unlock_irqrestore(&nesqp->lock, flags);
@@ -2922,7 +2918,6 @@ static void nes_process_iwarp_aeqe(struct nes_device *nesdev,
 			if ((tcp_state == NES_AEQE_TCP_STATE_CLOSE_WAIT) ||
 					((nesqp->ibqp_state == IB_QPS_RTS)&&
 					(async_event_id == NES_AEQE_AEID_LLP_CONNECTION_RESET))) {
-				nes_add_ref(&nesqp->ibqp);
 				nes_cm_disconn(nesqp);
 			} else {
 				nesqp->in_disconnect = 0;
@@ -2931,7 +2926,6 @@ static void nes_process_iwarp_aeqe(struct nes_device *nesdev,
 			break;
 		case NES_AEQE_AEID_LLP_TOO_MANY_RETRIES:
 			nesqp = *((struct nes_qp **)&context);
-			nes_add_ref(&nesqp->ibqp);
 			spin_lock_irqsave(&nesqp->lock, flags);
 			nesqp->hw_iwarp_state = NES_AEQE_IWARP_STATE_ERROR;
 			nesqp->hw_tcp_state = NES_AEQE_TCP_STATE_CLOSED;
@@ -3042,7 +3036,6 @@ static void nes_process_iwarp_aeqe(struct nes_device *nesdev,
 				nesqp->ibqp.event_handler(&ibevent, nesqp->ibqp.qp_context);
 			}
 			/* tell cm to disconnect, cm will queue work to thread */
-			nes_add_ref(&nesqp->ibqp);
 			nes_cm_disconn(nesqp);
 			break;
 		case NES_AEQE_AEID_DDP_UBE_INVALID_MSN_NO_BUFFER_AVAILABLE:
@@ -3062,7 +3055,6 @@ static void nes_process_iwarp_aeqe(struct nes_device *nesdev,
 				nesqp->ibqp.event_handler(&ibevent, nesqp->ibqp.qp_context);
 			}
 			/* tell cm to disconnect, cm will queue work to thread */
-			nes_add_ref(&nesqp->ibqp);
 			nes_cm_disconn(nesqp);
 			break;
 		case NES_AEQE_AEID_LLP_RECEIVED_MPA_CRC_ERROR:
@@ -3082,7 +3074,6 @@ static void nes_process_iwarp_aeqe(struct nes_device *nesdev,
 				nesqp->ibqp.event_handler(&ibevent, nesqp->ibqp.qp_context);
 			}
 			/* tell cm to disconnect, cm will queue work to thread */
-			nes_add_ref(&nesqp->ibqp);
 			nes_cm_disconn(nesqp);
 			break;
 			/* TODO: additional AEs need to be here */
diff --git a/drivers/infiniband/hw/nes/nes_verbs.c b/drivers/infiniband/hw/nes/nes_verbs.c
index e3939d13484e..d79942e84979 100644
--- a/drivers/infiniband/hw/nes/nes_verbs.c
+++ b/drivers/infiniband/hw/nes/nes_verbs.c
@@ -2867,7 +2867,6 @@ int nes_modify_qp(struct ib_qp *ibqp, struct ib_qp_attr *attr,
 			nesqp->hwqp.qp_id, attr->qp_state, nesqp->ibqp_state,
 			nesqp->iwarp_state, atomic_read(&nesqp->refcount));
 
-	nes_add_ref(&nesqp->ibqp);
 	spin_lock_irqsave(&nesqp->lock, qplockflags);
 
 	nes_debug(NES_DBG_MOD_QP, "QP%u: hw_iwarp_state=0x%X, hw_tcp_state=0x%X,"
@@ -2882,7 +2881,6 @@ int nes_modify_qp(struct ib_qp *ibqp, struct ib_qp_attr *attr,
 						nesqp->hwqp.qp_id);
 				if (nesqp->iwarp_state > (u32)NES_CQP_QP_IWARP_STATE_IDLE) {
 					spin_unlock_irqrestore(&nesqp->lock, qplockflags);
-					nes_rem_ref(&nesqp->ibqp);
 					return -EINVAL;
 				}
 				next_iwarp_state = NES_CQP_QP_IWARP_STATE_IDLE;
@@ -2893,7 +2891,6 @@ int nes_modify_qp(struct ib_qp *ibqp, struct ib_qp_attr *attr,
 						nesqp->hwqp.qp_id);
 				if (nesqp->iwarp_state>(u32)NES_CQP_QP_IWARP_STATE_IDLE) {
 					spin_unlock_irqrestore(&nesqp->lock, qplockflags);
-					nes_rem_ref(&nesqp->ibqp);
 					return -EINVAL;
 				}
 				next_iwarp_state = NES_CQP_QP_IWARP_STATE_IDLE;
@@ -2904,14 +2901,12 @@ int nes_modify_qp(struct ib_qp *ibqp, struct ib_qp_attr *attr,
 						nesqp->hwqp.qp_id);
 				if (nesqp->iwarp_state>(u32)NES_CQP_QP_IWARP_STATE_RTS) {
 					spin_unlock_irqrestore(&nesqp->lock, qplockflags);
-					nes_rem_ref(&nesqp->ibqp);
 					return -EINVAL;
 				}
 				if (nesqp->cm_id == NULL) {
 					nes_debug(NES_DBG_MOD_QP, "QP%u: Failing attempt to move QP to RTS without a CM_ID. \n",
 							nesqp->hwqp.qp_id );
 					spin_unlock_irqrestore(&nesqp->lock, qplockflags);
-					nes_rem_ref(&nesqp->ibqp);
 					return -EINVAL;
 				}
 				next_iwarp_state = NES_CQP_QP_IWARP_STATE_RTS;
@@ -2929,7 +2924,6 @@ int nes_modify_qp(struct ib_qp *ibqp, struct ib_qp_attr *attr,
 						nesqp->hwqp.qp_id, nesqp->hwqp.sq_head, nesqp->hwqp.sq_tail);
 				if (nesqp->iwarp_state == (u32)NES_CQP_QP_IWARP_STATE_CLOSING) {
 					spin_unlock_irqrestore(&nesqp->lock, qplockflags);
-					nes_rem_ref(&nesqp->ibqp);
 					return 0;
 				} else {
 					if (nesqp->iwarp_state > (u32)NES_CQP_QP_IWARP_STATE_CLOSING) {
@@ -2937,7 +2931,6 @@ int nes_modify_qp(struct ib_qp *ibqp, struct ib_qp_attr *attr,
 								" ignored due to current iWARP state\n",
 								nesqp->hwqp.qp_id);
 						spin_unlock_irqrestore(&nesqp->lock, qplockflags);
-						nes_rem_ref(&nesqp->ibqp);
 						return -EINVAL;
 					}
 					if (nesqp->hw_iwarp_state != NES_AEQE_IWARP_STATE_RTS) {
@@ -2969,7 +2962,6 @@ int nes_modify_qp(struct ib_qp *ibqp, struct ib_qp_attr *attr,
 						nesqp->hwqp.qp_id);
 				if (nesqp->iwarp_state>=(u32)NES_CQP_QP_IWARP_STATE_TERMINATE) {
 					spin_unlock_irqrestore(&nesqp->lock, qplockflags);
-					nes_rem_ref(&nesqp->ibqp);
 					return -EINVAL;
 				}
 				/* next_iwarp_state = (NES_CQP_QP_IWARP_STATE_TERMINATE | 0x02000000); */
@@ -2982,7 +2974,6 @@ int nes_modify_qp(struct ib_qp *ibqp, struct ib_qp_attr *attr,
 			case IB_QPS_RESET:
 				if (nesqp->iwarp_state == (u32)NES_CQP_QP_IWARP_STATE_ERROR) {
 					spin_unlock_irqrestore(&nesqp->lock, qplockflags);
-					nes_rem_ref(&nesqp->ibqp);
 					return -EINVAL;
 				}
 				nes_debug(NES_DBG_MOD_QP, "QP%u: new state = error\n",
@@ -3008,7 +2999,6 @@ int nes_modify_qp(struct ib_qp *ibqp, struct ib_qp_attr *attr,
 				break;
 			default:
 				spin_unlock_irqrestore(&nesqp->lock, qplockflags);
-				nes_rem_ref(&nesqp->ibqp);
 				return -EINVAL;
 				break;
 		}
@@ -3088,7 +3078,6 @@ int nes_modify_qp(struct ib_qp *ibqp, struct ib_qp_attr *attr,
 							nesqp->hwqp.qp_id, atomic_read(&nesqp->refcount),
 							original_last_aeq, nesqp->last_aeq);
 					/* this one is for the cm_disconnect thread */
-					nes_add_ref(&nesqp->ibqp);
 					spin_lock_irqsave(&nesqp->lock, qplockflags);
 					nesqp->hw_tcp_state = NES_AEQE_TCP_STATE_CLOSED;
 					nesqp->last_aeq = NES_AEQE_AEID_RESET_SENT;
@@ -3097,14 +3086,12 @@ int nes_modify_qp(struct ib_qp *ibqp, struct ib_qp_attr *attr,
 				} else {
 					nes_debug(NES_DBG_MOD_QP, "QP%u No fake disconnect, QP refcount=%d\n",
 							nesqp->hwqp.qp_id, atomic_read(&nesqp->refcount));
-					nes_rem_ref(&nesqp->ibqp);
 				}
 			} else {
 				spin_lock_irqsave(&nesqp->lock, qplockflags);
 				if (nesqp->cm_id) {
 					/* These two are for the timer thread */
 					if (atomic_inc_return(&nesqp->close_timer_started) == 1) {
-						nes_add_ref(&nesqp->ibqp);
 						nesqp->cm_id->add_ref(nesqp->cm_id);
 						nes_debug(NES_DBG_MOD_QP, "QP%u Not decrementing QP refcount (%d),"
 								" need ae to finish up, original_last_aeq = 0x%04X."
@@ -3128,14 +3115,12 @@ int nes_modify_qp(struct ib_qp *ibqp, struct ib_qp_attr *attr,
 					" original_last_aeq = 0x%04X. last_aeq = 0x%04X.\n",
 					nesqp->hwqp.qp_id, atomic_read(&nesqp->refcount),
 					original_last_aeq, nesqp->last_aeq);
-			nes_rem_ref(&nesqp->ibqp);
 		}
 	} else {
 		nes_debug(NES_DBG_MOD_QP, "QP%u Decrementing QP refcount (%d), No ae to finish up,"
 				" original_last_aeq = 0x%04X. last_aeq = 0x%04X.\n",
 				nesqp->hwqp.qp_id, atomic_read(&nesqp->refcount),
 				original_last_aeq, nesqp->last_aeq);
-		nes_rem_ref(&nesqp->ibqp);
 	}
 
 	err = 0;
diff --git a/drivers/infiniband/ulp/ipoib/Kconfig b/drivers/infiniband/ulp/ipoib/Kconfig
index 691525cf394a..9d9a9dc51f18 100644
--- a/drivers/infiniband/ulp/ipoib/Kconfig
+++ b/drivers/infiniband/ulp/ipoib/Kconfig
@@ -11,16 +11,17 @@ config INFINIBAND_IPOIB
 
 config INFINIBAND_IPOIB_CM
 	bool "IP-over-InfiniBand Connected Mode support"
-	depends on INFINIBAND_IPOIB && EXPERIMENTAL
+	depends on INFINIBAND_IPOIB
 	default n
 	---help---
-	  This option enables experimental support for IPoIB connected mode.
-	  After enabling this option, you need to switch to connected mode through
-	  /sys/class/net/ibXXX/mode to actually create connections, and then increase
-	  the interface MTU with e.g. ifconfig ib0 mtu 65520.
+	  This option enables support for IPoIB connected mode.  After
+	  enabling this option, you need to switch to connected mode
+	  through /sys/class/net/ibXXX/mode to actually create
+	  connections, and then increase the interface MTU with
+	  e.g. ifconfig ib0 mtu 65520.
 
-	  WARNING: Enabling connected mode will trigger some
-	  packet drops for multicast and UD mode traffic from this interface,
+	  WARNING: Enabling connected mode will trigger some packet
+	  drops for multicast and UD mode traffic from this interface,
 	  unless you limit mtu for these destinations to 2044.
 
 config INFINIBAND_IPOIB_DEBUG
@@ -33,9 +34,10 @@ config INFINIBAND_IPOIB_DEBUG
 	  debug_level and mcast_debug_level module parameters (which
 	  can also be set after the driver is loaded through sysfs).
 
-	  This option also creates an "ipoib_debugfs," which can be
-	  mounted to expose debugging information about IB multicast
-	  groups used by the IPoIB driver.
+	  This option also creates a directory tree under ipoib/ in
+	  debugfs, which contains files that expose debugging
+	  information about IB multicast groups used by the IPoIB
+	  driver.
 
 config INFINIBAND_IPOIB_DEBUG_DATA
 	bool "IP-over-InfiniBand data path debugging"
diff --git a/drivers/infiniband/ulp/ipoib/ipoib_cm.c b/drivers/infiniband/ulp/ipoib/ipoib_cm.c
index 0f2d3045061a..341ffedafed6 100644
--- a/drivers/infiniband/ulp/ipoib/ipoib_cm.c
+++ b/drivers/infiniband/ulp/ipoib/ipoib_cm.c
@@ -202,7 +202,7 @@ static void ipoib_cm_free_rx_ring(struct net_device *dev,
 			dev_kfree_skb_any(rx_ring[i].skb);
 		}
 
-	kfree(rx_ring);
+	vfree(rx_ring);
 }
 
 static void ipoib_cm_start_rx_drain(struct ipoib_dev_priv *priv)
@@ -337,7 +337,7 @@ static void ipoib_cm_init_rx_wr(struct net_device *dev,
 		sge[i].length = PAGE_SIZE;
 
 	wr->next    = NULL;
-	wr->sg_list = priv->cm.rx_sge;
+	wr->sg_list = sge;
 	wr->num_sge = priv->cm.num_frags;
 }
 
@@ -352,9 +352,14 @@ static int ipoib_cm_nonsrq_init_rx(struct net_device *dev, struct ib_cm_id *cm_i
 	int ret;
 	int i;
 
-	rx->rx_ring = kcalloc(ipoib_recvq_size, sizeof *rx->rx_ring, GFP_KERNEL);
-	if (!rx->rx_ring)
+	rx->rx_ring = vmalloc(ipoib_recvq_size * sizeof *rx->rx_ring);
+	if (!rx->rx_ring) {
+		printk(KERN_WARNING "%s: failed to allocate CM non-SRQ ring (%d entries)\n",
+		       priv->ca->name, ipoib_recvq_size);
 		return -ENOMEM;
+	}
+
+	memset(rx->rx_ring, 0, ipoib_recvq_size * sizeof *rx->rx_ring);
 
 	t = kmalloc(sizeof *t, GFP_KERNEL);
 	if (!t) {
@@ -1494,14 +1499,16 @@ static void ipoib_cm_create_srq(struct net_device *dev, int max_sge)
 		return;
 	}
 
-	priv->cm.srq_ring = kzalloc(ipoib_recvq_size * sizeof *priv->cm.srq_ring,
-				    GFP_KERNEL);
+	priv->cm.srq_ring = vmalloc(ipoib_recvq_size * sizeof *priv->cm.srq_ring);
 	if (!priv->cm.srq_ring) {
 		printk(KERN_WARNING "%s: failed to allocate CM SRQ ring (%d entries)\n",
 		       priv->ca->name, ipoib_recvq_size);
 		ib_destroy_srq(priv->cm.srq);
 		priv->cm.srq = NULL;
+		return;
 	}
+
+	memset(priv->cm.srq_ring, 0, ipoib_recvq_size * sizeof *priv->cm.srq_ring);
 }
 
 int ipoib_cm_dev_init(struct net_device *dev)
diff --git a/drivers/infiniband/ulp/ipoib/ipoib_main.c b/drivers/infiniband/ulp/ipoib/ipoib_main.c
index f51201b17bfd..7e9e218738fa 100644
--- a/drivers/infiniband/ulp/ipoib/ipoib_main.c
+++ b/drivers/infiniband/ulp/ipoib/ipoib_main.c
@@ -156,14 +156,8 @@ static int ipoib_stop(struct net_device *dev)
 
 	netif_stop_queue(dev);
 
-	/*
-	 * Now flush workqueue to make sure a scheduled task doesn't
-	 * bring our internal state back up.
-	 */
-	flush_workqueue(ipoib_workqueue);
-
-	ipoib_ib_dev_down(dev, 1);
-	ipoib_ib_dev_stop(dev, 1);
+	ipoib_ib_dev_down(dev, 0);
+	ipoib_ib_dev_stop(dev, 0);
 
 	if (!test_bit(IPOIB_FLAG_SUBINTERFACE, &priv->flags)) {
 		struct ipoib_dev_priv *cpriv;
@@ -1314,7 +1308,7 @@ sysfs_failed:
 
 register_failed:
 	ib_unregister_event_handler(&priv->event_handler);
-	flush_scheduled_work();
+	flush_workqueue(ipoib_workqueue);
 
 event_failed:
 	ipoib_dev_cleanup(priv->dev);
@@ -1373,7 +1367,12 @@ static void ipoib_remove_one(struct ib_device *device)
 
 	list_for_each_entry_safe(priv, tmp, dev_list, list) {
 		ib_unregister_event_handler(&priv->event_handler);
-		flush_scheduled_work();
+
+		rtnl_lock();
+		dev_change_flags(priv->dev, priv->dev->flags & ~IFF_UP);
+		rtnl_unlock();
+
+		flush_workqueue(ipoib_workqueue);
 
 		unregister_netdev(priv->dev);
 		ipoib_dev_cleanup(priv->dev);
diff --git a/drivers/infiniband/ulp/ipoib/ipoib_multicast.c b/drivers/infiniband/ulp/ipoib/ipoib_multicast.c
index 8950e9546f4e..ac33c8f3ea85 100644
--- a/drivers/infiniband/ulp/ipoib/ipoib_multicast.c
+++ b/drivers/infiniband/ulp/ipoib/ipoib_multicast.c
@@ -392,8 +392,16 @@ static int ipoib_mcast_join_complete(int status,
 					   &priv->mcast_task, 0);
 		mutex_unlock(&mcast_mutex);
 
-		if (mcast == priv->broadcast)
+		if (mcast == priv->broadcast) {
+			/*
+			 * Take RTNL lock here to avoid racing with
+			 * ipoib_stop() and turning the carrier back
+			 * on while a device is being removed.
+			 */
+			rtnl_lock();
 			netif_carrier_on(dev);
+			rtnl_unlock();
+		}
 
 		return 0;
 	}
diff --git a/drivers/infiniband/ulp/iser/iser_verbs.c b/drivers/infiniband/ulp/iser/iser_verbs.c
index 63462ecca147..26ff6214a81f 100644
--- a/drivers/infiniband/ulp/iser/iser_verbs.c
+++ b/drivers/infiniband/ulp/iser/iser_verbs.c
@@ -33,7 +33,6 @@
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/delay.h>
-#include <linux/version.h>
 
 #include "iscsi_iser.h"
 
diff --git a/drivers/input/evdev.c b/drivers/input/evdev.c
index 2d65411f6763..3524bef62be6 100644
--- a/drivers/input/evdev.c
+++ b/drivers/input/evdev.c
@@ -647,6 +647,47 @@ static int str_to_user(const char *str, unsigned int maxlen, void __user *p)
 	return copy_to_user(p, str, len) ? -EFAULT : len;
 }
 
+#define OLD_KEY_MAX	0x1ff
+static int handle_eviocgbit(struct input_dev *dev, unsigned int cmd, void __user *p, int compat_mode)
+{
+	static unsigned long keymax_warn_time;
+	unsigned long *bits;
+	int len;
+
+	switch (_IOC_NR(cmd) & EV_MAX) {
+
+	case      0: bits = dev->evbit;  len = EV_MAX;  break;
+	case EV_KEY: bits = dev->keybit; len = KEY_MAX; break;
+	case EV_REL: bits = dev->relbit; len = REL_MAX; break;
+	case EV_ABS: bits = dev->absbit; len = ABS_MAX; break;
+	case EV_MSC: bits = dev->mscbit; len = MSC_MAX; break;
+	case EV_LED: bits = dev->ledbit; len = LED_MAX; break;
+	case EV_SND: bits = dev->sndbit; len = SND_MAX; break;
+	case EV_FF:  bits = dev->ffbit;  len = FF_MAX;  break;
+	case EV_SW:  bits = dev->swbit;  len = SW_MAX;  break;
+	default: return -EINVAL;
+	}
+
+	/*
+	 * Work around bugs in userspace programs that like to do
+	 * EVIOCGBIT(EV_KEY, KEY_MAX) and not realize that 'len'
+	 * should be in bytes, not in bits.
+	 */
+	if ((_IOC_NR(cmd) & EV_MAX) == EV_KEY && _IOC_SIZE(cmd) == OLD_KEY_MAX) {
+		len = OLD_KEY_MAX;
+		if (printk_timed_ratelimit(&keymax_warn_time, 10 * 1000))
+			printk(KERN_WARNING
+				"evdev.c(EVIOCGBIT): Suspicious buffer size %u, "
+				"limiting output to %zu bytes. See "
+				"http://userweb.kernel.org/~dtor/eviocgbit-bug.html\n",
+				OLD_KEY_MAX,
+				BITS_TO_LONGS(OLD_KEY_MAX) * sizeof(long));
+	}
+
+	return bits_to_user(bits, len, _IOC_SIZE(cmd), p, compat_mode);
+}
+#undef OLD_KEY_MAX
+
 static long evdev_do_ioctl(struct file *file, unsigned int cmd,
 			   void __user *p, int compat_mode)
 {
@@ -733,26 +774,8 @@ static long evdev_do_ioctl(struct file *file, unsigned int cmd,
 
 		if (_IOC_DIR(cmd) == _IOC_READ) {
 
-			if ((_IOC_NR(cmd) & ~EV_MAX) == _IOC_NR(EVIOCGBIT(0, 0))) {
-
-				unsigned long *bits;
-				int len;
-
-				switch (_IOC_NR(cmd) & EV_MAX) {
-
-				case      0: bits = dev->evbit;  len = EV_MAX;  break;
-				case EV_KEY: bits = dev->keybit; len = KEY_MAX; break;
-				case EV_REL: bits = dev->relbit; len = REL_MAX; break;
-				case EV_ABS: bits = dev->absbit; len = ABS_MAX; break;
-				case EV_MSC: bits = dev->mscbit; len = MSC_MAX; break;
-				case EV_LED: bits = dev->ledbit; len = LED_MAX; break;
-				case EV_SND: bits = dev->sndbit; len = SND_MAX; break;
-				case EV_FF:  bits = dev->ffbit;  len = FF_MAX;  break;
-				case EV_SW:  bits = dev->swbit;  len = SW_MAX;  break;
-				default: return -EINVAL;
-				}
-				return bits_to_user(bits, len, _IOC_SIZE(cmd), p, compat_mode);
-			}
+			if ((_IOC_NR(cmd) & ~EV_MAX) == _IOC_NR(EVIOCGBIT(0, 0)))
+				return handle_eviocgbit(dev, cmd, p, compat_mode);
 
 			if (_IOC_NR(cmd) == _IOC_NR(EVIOCGKEY(0)))
 				return bits_to_user(dev->key, KEY_MAX, _IOC_SIZE(cmd),
diff --git a/drivers/input/joystick/xpad.c b/drivers/input/joystick/xpad.c
index 87d3e7eabffd..6791be81eb29 100644
--- a/drivers/input/joystick/xpad.c
+++ b/drivers/input/joystick/xpad.c
@@ -127,6 +127,7 @@ static const struct xpad_device {
 	{ 0x0738, 0x4716, "Mad Catz Wired Xbox 360 Controller", MAP_DPAD_TO_AXES, XTYPE_XBOX360 },
 	{ 0x0738, 0x6040, "Mad Catz Beat Pad Pro", MAP_DPAD_TO_BUTTONS, XTYPE_XBOX },
 	{ 0x0c12, 0x8802, "Zeroplus Xbox Controller", MAP_DPAD_TO_AXES, XTYPE_XBOX },
+	{ 0x0c12, 0x880a, "Pelican Eclipse PL-2023", MAP_DPAD_TO_AXES, XTYPE_XBOX },
 	{ 0x0c12, 0x8810, "Zeroplus Xbox Controller", MAP_DPAD_TO_AXES, XTYPE_XBOX },
 	{ 0x0c12, 0x9902, "HAMA VibraX - *FAULTY HARDWARE*", MAP_DPAD_TO_AXES, XTYPE_XBOX },
 	{ 0x0e4c, 0x1097, "Radica Gamester Controller", MAP_DPAD_TO_AXES, XTYPE_XBOX },
diff --git a/drivers/input/keyboard/aaed2000_kbd.c b/drivers/input/keyboard/aaed2000_kbd.c
index 8a77bfcd05bc..18222a689a03 100644
--- a/drivers/input/keyboard/aaed2000_kbd.c
+++ b/drivers/input/keyboard/aaed2000_kbd.c
@@ -20,8 +20,8 @@
 #include <linux/module.h>
 #include <linux/slab.h>
 
-#include <asm/arch/hardware.h>
-#include <asm/arch/aaed2000.h>
+#include <mach/hardware.h>
+#include <mach/aaed2000.h>
 
 #define KB_ROWS			12
 #define KB_COLS			8
diff --git a/drivers/input/keyboard/bf54x-keys.c b/drivers/input/keyboard/bf54x-keys.c
index 54ed8e2e1c02..e348cfccc17a 100644
--- a/drivers/input/keyboard/bf54x-keys.c
+++ b/drivers/input/keyboard/bf54x-keys.c
@@ -29,7 +29,6 @@
  */
 
 #include <linux/module.h>
-#include <linux/version.h>
 
 #include <linux/init.h>
 #include <linux/fs.h>
@@ -44,7 +43,7 @@
 #include <linux/input.h>
 
 #include <asm/portmux.h>
-#include <asm/mach/bf54x_keys.h>
+#include <mach/bf54x_keys.h>
 
 #define DRV_NAME	"bf54x-keys"
 #define TIME_SCALE	100	/* 100 ns */
diff --git a/drivers/input/keyboard/corgikbd.c b/drivers/input/keyboard/corgikbd.c
index 1aa46ae12630..134e67bf6a90 100644
--- a/drivers/input/keyboard/corgikbd.c
+++ b/drivers/input/keyboard/corgikbd.c
@@ -20,10 +20,10 @@
 #include <linux/module.h>
 #include <linux/slab.h>
 
-#include <asm/arch/corgi.h>
-#include <asm/arch/hardware.h>
-#include <asm/arch/pxa-regs.h>
-#include <asm/arch/pxa2xx-gpio.h>
+#include <mach/corgi.h>
+#include <mach/hardware.h>
+#include <mach/pxa-regs.h>
+#include <mach/pxa2xx-gpio.h>
 #include <asm/hardware/scoop.h>
 
 #define KB_ROWS				8
diff --git a/drivers/input/keyboard/gpio_keys.c b/drivers/input/keyboard/gpio_keys.c
index be58730e636a..ec96b369dd7a 100644
--- a/drivers/input/keyboard/gpio_keys.c
+++ b/drivers/input/keyboard/gpio_keys.c
@@ -9,7 +9,6 @@
  */
 
 #include <linux/module.h>
-#include <linux/version.h>
 
 #include <linux/init.h>
 #include <linux/fs.h>
@@ -118,6 +117,7 @@ static int __devinit gpio_keys_probe(struct platform_device *pdev)
 		unsigned int type = button->type ?: EV_KEY;
 
 		bdata->input = input;
+		bdata->button = button;
 		setup_timer(&bdata->timer,
 			    gpio_check_button, (unsigned long)bdata);
 
@@ -256,7 +256,7 @@ static int gpio_keys_resume(struct platform_device *pdev)
 #define gpio_keys_resume	NULL
 #endif
 
-struct platform_driver gpio_keys_device_driver = {
+static struct platform_driver gpio_keys_device_driver = {
 	.probe		= gpio_keys_probe,
 	.remove		= __devexit_p(gpio_keys_remove),
 	.suspend	= gpio_keys_suspend,
diff --git a/drivers/input/keyboard/jornada720_kbd.c b/drivers/input/keyboard/jornada720_kbd.c
index ce650af6d649..4e016d823069 100644
--- a/drivers/input/keyboard/jornada720_kbd.c
+++ b/drivers/input/keyboard/jornada720_kbd.c
@@ -24,8 +24,8 @@
 #include <linux/module.h>
 #include <linux/platform_device.h>
 
-#include <asm/arch/jornada720.h>
-#include <asm/hardware.h>
+#include <mach/jornada720.h>
+#include <mach/hardware.h>
 
 MODULE_AUTHOR("Kristoffer Ericson <Kristoffer.Ericson@gmail.com>");
 MODULE_DESCRIPTION("HP Jornada 710/720/728 keyboard driver");
diff --git a/drivers/input/keyboard/maple_keyb.c b/drivers/input/keyboard/maple_keyb.c
index 2b404284c28a..22f17a593be7 100644
--- a/drivers/input/keyboard/maple_keyb.c
+++ b/drivers/input/keyboard/maple_keyb.c
@@ -2,7 +2,7 @@
  * SEGA Dreamcast keyboard driver
  * Based on drivers/usb/usbkbd.c
  * Copyright YAEGASHI Takeshi, 2001
- * Porting to 2.6 Copyright Adrian McMenamin, 2007
+ * Porting to 2.6 Copyright Adrian McMenamin, 2007, 2008
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -27,7 +27,6 @@
 #include <linux/init.h>
 #include <linux/timer.h>
 #include <linux/maple.h>
-#include <asm/mach/maple.h>
 
 /* Very simple mutex to ensure proper cleanup */
 static DEFINE_MUTEX(maple_keyb_mutex);
@@ -46,39 +45,51 @@ struct dc_kbd {
 };
 
 static const unsigned short dc_kbd_keycode[NR_SCANCODES] = {
-	KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_A, KEY_B, KEY_C, KEY_D,
-	KEY_E, KEY_F, KEY_G, KEY_H, KEY_I, KEY_J, KEY_K, KEY_L,
-	KEY_M, KEY_N, KEY_O, KEY_P, KEY_Q, KEY_R, KEY_S, KEY_T,
-	KEY_U, KEY_V, KEY_W, KEY_X, KEY_Y, KEY_Z, KEY_1, KEY_2,
-	KEY_3, KEY_4, KEY_5, KEY_6, KEY_7, KEY_8, KEY_9, KEY_0,
-	KEY_ENTER, KEY_ESC, KEY_BACKSPACE, KEY_TAB, KEY_SPACE, KEY_MINUS, KEY_EQUAL, KEY_LEFTBRACE,
-	KEY_RIGHTBRACE, KEY_BACKSLASH, KEY_BACKSLASH, KEY_SEMICOLON, KEY_APOSTROPHE, KEY_GRAVE, KEY_COMMA,
-	KEY_DOT, KEY_SLASH, KEY_CAPSLOCK, KEY_F1, KEY_F2, KEY_F3, KEY_F4, KEY_F5, KEY_F6,
+	KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_A, KEY_B,
+	KEY_C, KEY_D, KEY_E, KEY_F, KEY_G, KEY_H, KEY_I, KEY_J, KEY_K, KEY_L,
+	KEY_M, KEY_N, KEY_O, KEY_P, KEY_Q, KEY_R, KEY_S, KEY_T, KEY_U, KEY_V,
+	KEY_W, KEY_X, KEY_Y, KEY_Z, KEY_1, KEY_2, KEY_3, KEY_4, KEY_5, KEY_6,
+	KEY_7, KEY_8, KEY_9, KEY_0, KEY_ENTER, KEY_ESC, KEY_BACKSPACE,
+	KEY_TAB, KEY_SPACE, KEY_MINUS, KEY_EQUAL, KEY_LEFTBRACE,
+	KEY_RIGHTBRACE, KEY_BACKSLASH, KEY_BACKSLASH, KEY_SEMICOLON,
+	KEY_APOSTROPHE, KEY_GRAVE, KEY_COMMA, KEY_DOT, KEY_SLASH,
+	KEY_CAPSLOCK, KEY_F1, KEY_F2, KEY_F3, KEY_F4, KEY_F5, KEY_F6,
 	KEY_F7, KEY_F8, KEY_F9, KEY_F10, KEY_F11, KEY_F12, KEY_SYSRQ,
-	KEY_SCROLLLOCK, KEY_PAUSE, KEY_INSERT, KEY_HOME, KEY_PAGEUP, KEY_DELETE,
-	KEY_END, KEY_PAGEDOWN, KEY_RIGHT, KEY_LEFT, KEY_DOWN, KEY_UP,
-	KEY_NUMLOCK, KEY_KPSLASH, KEY_KPASTERISK, KEY_KPMINUS, KEY_KPPLUS, KEY_KPENTER, KEY_KP1, KEY_KP2,
-	KEY_KP3, KEY_KP4, KEY_KP5, KEY_KP6, KEY_KP7, KEY_KP8, KEY_KP9, KEY_KP0, KEY_KPDOT,
-	KEY_102ND, KEY_COMPOSE, KEY_POWER, KEY_KPEQUAL, KEY_F13, KEY_F14, KEY_F15,
-	KEY_F16, KEY_F17, KEY_F18, KEY_F19, KEY_F20,
-	KEY_F21, KEY_F22, KEY_F23, KEY_F24, KEY_OPEN, KEY_HELP, KEY_PROPS, KEY_FRONT,
-	KEY_STOP, KEY_AGAIN, KEY_UNDO, KEY_CUT, KEY_COPY, KEY_PASTE, KEY_FIND, KEY_MUTE,
-	KEY_VOLUMEUP, KEY_VOLUMEDOWN, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_KPCOMMA, KEY_RESERVED, KEY_RO, KEY_KATAKANAHIRAGANA , KEY_YEN,
-	KEY_HENKAN, KEY_MUHENKAN, KEY_KPJPCOMMA, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED,
-	KEY_HANGEUL, KEY_HANJA, KEY_KATAKANA, KEY_HIRAGANA, KEY_ZENKAKUHANKAKU, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED,
-	KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED,
-	KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED,
-	KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED,
-	KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED,
-	KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED,
-	KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED,
-	KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED,
-	KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED,
-	KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED,
-	KEY_LEFTCTRL, KEY_LEFTSHIFT, KEY_LEFTALT, KEY_LEFTMETA, KEY_RIGHTCTRL, KEY_RIGHTSHIFT, KEY_RIGHTALT, KEY_RIGHTMETA,
-	KEY_PLAYPAUSE, KEY_STOPCD, KEY_PREVIOUSSONG, KEY_NEXTSONG, KEY_EJECTCD, KEY_VOLUMEUP, KEY_VOLUMEDOWN, KEY_MUTE,
-	KEY_WWW, KEY_BACK, KEY_FORWARD, KEY_STOP, KEY_FIND, KEY_SCROLLUP, KEY_SCROLLDOWN, KEY_EDIT, KEY_SLEEP,
-	KEY_SCREENLOCK, KEY_REFRESH, KEY_CALC, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED
+	KEY_SCROLLLOCK, KEY_PAUSE, KEY_INSERT, KEY_HOME, KEY_PAGEUP,
+	KEY_DELETE, KEY_END, KEY_PAGEDOWN, KEY_RIGHT, KEY_LEFT, KEY_DOWN,
+	KEY_UP, KEY_NUMLOCK, KEY_KPSLASH, KEY_KPASTERISK, KEY_KPMINUS,
+	KEY_KPPLUS, KEY_KPENTER, KEY_KP1, KEY_KP2, KEY_KP3, KEY_KP4, KEY_KP5,
+	KEY_KP6, KEY_KP7, KEY_KP8, KEY_KP9, KEY_KP0, KEY_KPDOT, KEY_102ND,
+	KEY_COMPOSE, KEY_POWER, KEY_KPEQUAL, KEY_F13, KEY_F14, KEY_F15,
+	KEY_F16, KEY_F17, KEY_F18, KEY_F19, KEY_F20, KEY_F21, KEY_F22,
+	KEY_F23, KEY_F24, KEY_OPEN, KEY_HELP, KEY_PROPS, KEY_FRONT, KEY_STOP,
+	KEY_AGAIN, KEY_UNDO, KEY_CUT, KEY_COPY, KEY_PASTE, KEY_FIND, KEY_MUTE,
+	KEY_VOLUMEUP, KEY_VOLUMEDOWN, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED,
+	KEY_KPCOMMA, KEY_RESERVED, KEY_RO, KEY_KATAKANAHIRAGANA , KEY_YEN,
+	KEY_HENKAN, KEY_MUHENKAN, KEY_KPJPCOMMA, KEY_RESERVED, KEY_RESERVED,
+	KEY_RESERVED, KEY_HANGEUL, KEY_HANJA, KEY_KATAKANA, KEY_HIRAGANA,
+	KEY_ZENKAKUHANKAKU, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED,
+	KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED,
+	KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED,
+	KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED,
+	KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED,
+	KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED,
+	KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED,
+	KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED,
+	KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED,
+	KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED,
+	KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED,
+	KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED,
+	KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED,
+	KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED,
+	KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED,
+	KEY_RESERVED, KEY_RESERVED, KEY_LEFTCTRL, KEY_LEFTSHIFT, KEY_LEFTALT,
+	KEY_LEFTMETA, KEY_RIGHTCTRL, KEY_RIGHTSHIFT, KEY_RIGHTALT,
+	KEY_RIGHTMETA, KEY_PLAYPAUSE, KEY_STOPCD, KEY_PREVIOUSSONG,
+	KEY_NEXTSONG, KEY_EJECTCD, KEY_VOLUMEUP, KEY_VOLUMEDOWN, KEY_MUTE,
+	KEY_WWW, KEY_BACK, KEY_FORWARD, KEY_STOP, KEY_FIND, KEY_SCROLLUP,
+	KEY_SCROLLDOWN, KEY_EDIT, KEY_SLEEP, KEY_SCREENLOCK, KEY_REFRESH,
+	KEY_CALC, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED
 };
 
 static void dc_scan_kbd(struct dc_kbd *kbd)
@@ -128,12 +139,12 @@ static void dc_scan_kbd(struct dc_kbd *kbd)
 static void dc_kbd_callback(struct mapleq *mq)
 {
 	struct maple_device *mapledev = mq->dev;
-	struct dc_kbd *kbd = mapledev->private_data;
+	struct dc_kbd *kbd = maple_get_drvdata(mapledev);
 	unsigned long *buf = mq->recvbuf;
 
 	/*
-	 * We should always be getting the lock because the only
-	 * time it may be locked if driver is in cleanup phase.
+	 * We should always get the lock because the only
+	 * time it may be locked is if the driver is in the cleanup phase.
 	 */
 	if (likely(mutex_trylock(&maple_keyb_mutex))) {
 
@@ -146,106 +157,96 @@ static void dc_kbd_callback(struct mapleq *mq)
 	}
 }
 
-static int dc_kbd_connect(struct maple_device *mdev)
+static int probe_maple_kbd(struct device *dev)
 {
+	struct maple_device *mdev = to_maple_dev(dev);
+	struct maple_driver *mdrv = to_maple_driver(dev->driver);
 	int i, error;
 	struct dc_kbd *kbd;
-	struct input_dev *dev;
+	struct input_dev *idev;
 
 	if (!(mdev->function & MAPLE_FUNC_KEYBOARD))
 		return -EINVAL;
 
 	kbd = kzalloc(sizeof(struct dc_kbd), GFP_KERNEL);
-	dev = input_allocate_device();
-	if (!kbd || !dev) {
+	idev = input_allocate_device();
+	if (!kbd || !idev) {
 		error = -ENOMEM;
 		goto fail;
 	}
 
-	mdev->private_data = kbd;
-
-	kbd->dev = dev;
+	kbd->dev = idev;
 	memcpy(kbd->keycode, dc_kbd_keycode, sizeof(kbd->keycode));
 
-	dev->name = mdev->product_name;
-	dev->evbit[0] = BIT(EV_KEY) | BIT(EV_REP);
-	dev->keycode = kbd->keycode;
-	dev->keycodesize = sizeof (unsigned short);
-	dev->keycodemax = ARRAY_SIZE(kbd->keycode);
-	dev->id.bustype = BUS_HOST;
-	dev->dev.parent = &mdev->dev;
+	idev->name = mdev->product_name;
+	idev->evbit[0] = BIT(EV_KEY) | BIT(EV_REP);
+	idev->keycode = kbd->keycode;
+	idev->keycodesize = sizeof(unsigned short);
+	idev->keycodemax = ARRAY_SIZE(kbd->keycode);
+	idev->id.bustype = BUS_HOST;
+	idev->dev.parent = &mdev->dev;
 
 	for (i = 0; i < NR_SCANCODES; i++)
-		__set_bit(dc_kbd_keycode[i], dev->keybit);
-	__clear_bit(KEY_RESERVED, dev->keybit);
+		__set_bit(dc_kbd_keycode[i], idev->keybit);
+	__clear_bit(KEY_RESERVED, idev->keybit);
 
-	input_set_capability(dev, EV_MSC, MSC_SCAN);
-	input_set_drvdata(dev, kbd);
+	input_set_capability(idev, EV_MSC, MSC_SCAN);
+	input_set_drvdata(idev, kbd);
 
-	error = input_register_device(dev);
+	error = input_register_device(idev);
 	if (error)
 		goto fail;
 
 	/* Maple polling is locked to VBLANK - which may be just 50/s */
-	maple_getcond_callback(mdev, dc_kbd_callback, HZ/50, MAPLE_FUNC_KEYBOARD);
-	return 0;
+	maple_getcond_callback(mdev, dc_kbd_callback, HZ/50,
+		MAPLE_FUNC_KEYBOARD);
 
- fail:
-	input_free_device(dev);
+	mdev->driver = mdrv;
+
+	maple_set_drvdata(mdev, kbd);
+
+	return error;
+
+fail:
+	input_free_device(idev);
 	kfree(kbd);
-	mdev->private_data = NULL;
+	maple_set_drvdata(mdev, NULL);
 	return error;
 }
 
-static void dc_kbd_disconnect(struct maple_device *mdev)
+static int remove_maple_kbd(struct device *dev)
 {
-	struct dc_kbd *kbd;
+	struct maple_device *mdev = to_maple_dev(dev);
+	struct dc_kbd *kbd = maple_get_drvdata(mdev);
 
 	mutex_lock(&maple_keyb_mutex);
 
-	kbd = mdev->private_data;
-	mdev->private_data = NULL;
 	input_unregister_device(kbd->dev);
 	kfree(kbd);
 
-	mutex_unlock(&maple_keyb_mutex);
-}
-
-/* allow the keyboard to be used */
-static int probe_maple_kbd(struct device *dev)
-{
-	struct maple_device *mdev = to_maple_dev(dev);
-	struct maple_driver *mdrv = to_maple_driver(dev->driver);
-	int error;
-
-	error = dc_kbd_connect(mdev);
-	if (error)
-		return error;
-
-	mdev->driver = mdrv;
-	mdev->registered = 1;
+	maple_set_drvdata(mdev, NULL);
 
+	mutex_unlock(&maple_keyb_mutex);
 	return 0;
 }
 
 static struct maple_driver dc_kbd_driver = {
 	.function = MAPLE_FUNC_KEYBOARD,
-	.connect = dc_kbd_connect,
-	.disconnect = dc_kbd_disconnect,
 	.drv = {
 		.name = "Dreamcast_keyboard",
 		.probe = probe_maple_kbd,
-       },
+		.remove = remove_maple_kbd,
+	},
 };
 
 static int __init dc_kbd_init(void)
 {
-	return maple_driver_register(&dc_kbd_driver.drv);
+	return maple_driver_register(&dc_kbd_driver);
 }
 
 static void __exit dc_kbd_exit(void)
 {
-	driver_unregister(&dc_kbd_driver.drv);
+	maple_driver_unregister(&dc_kbd_driver);
 }
 
 module_init(dc_kbd_init);
diff --git a/drivers/input/keyboard/omap-keypad.c b/drivers/input/keyboard/omap-keypad.c
index 10afd2068068..dcea87a0bc56 100644
--- a/drivers/input/keyboard/omap-keypad.c
+++ b/drivers/input/keyboard/omap-keypad.c
@@ -34,14 +34,13 @@
 #include <linux/platform_device.h>
 #include <linux/mutex.h>
 #include <linux/errno.h>
-#include <asm/arch/gpio.h>
-#include <asm/arch/keypad.h>
-#include <asm/arch/menelaus.h>
+#include <mach/gpio.h>
+#include <mach/keypad.h>
+#include <mach/menelaus.h>
 #include <asm/irq.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
-#include <asm/mach-types.h>
-#include <asm/arch/mux.h>
+#include <mach/mux.h>
 
 #undef NEW_BOARD_LEARNING_MODE
 
diff --git a/drivers/input/keyboard/pxa27x_keypad.c b/drivers/input/keyboard/pxa27x_keypad.c
index 6f1516f50750..6d30c6d334c3 100644
--- a/drivers/input/keyboard/pxa27x_keypad.c
+++ b/drivers/input/keyboard/pxa27x_keypad.c
@@ -26,12 +26,11 @@
 #include <linux/clk.h>
 #include <linux/err.h>
 
-#include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 
-#include <asm/arch/hardware.h>
-#include <asm/arch/pxa27x_keypad.h>
+#include <mach/hardware.h>
+#include <mach/pxa27x_keypad.h>
 
 /*
  * Keypad Controller registers
diff --git a/drivers/input/keyboard/sh_keysc.c b/drivers/input/keyboard/sh_keysc.c
index 8486abc457ed..c600ab7f93e8 100644
--- a/drivers/input/keyboard/sh_keysc.c
+++ b/drivers/input/keyboard/sh_keysc.c
@@ -158,25 +158,18 @@ static int __devinit sh_keysc_probe(struct platform_device *pdev)
 	memcpy(&priv->pdata, pdev->dev.platform_data, sizeof(priv->pdata));
 	pdata = &priv->pdata;
 
-	res = request_mem_region(res->start, res_size(res), pdev->name);
-	if (res == NULL) {
-		dev_err(&pdev->dev, "failed to request I/O memory\n");
-		error = -EBUSY;
-		goto err1;
-	}
-
 	priv->iomem_base = ioremap_nocache(res->start, res_size(res));
 	if (priv->iomem_base == NULL) {
 		dev_err(&pdev->dev, "failed to remap I/O memory\n");
 		error = -ENXIO;
-		goto err2;
+		goto err1;
 	}
 
 	priv->input = input_allocate_device();
 	if (!priv->input) {
 		dev_err(&pdev->dev, "failed to allocate input device\n");
 		error = -ENOMEM;
-		goto err3;
+		goto err2;
 	}
 
 	input = priv->input;
@@ -194,7 +187,7 @@ static int __devinit sh_keysc_probe(struct platform_device *pdev)
 	error = request_irq(irq, sh_keysc_isr, 0, pdev->name, pdev);
 	if (error) {
 		dev_err(&pdev->dev, "failed to request IRQ\n");
-		goto err4;
+		goto err3;
 	}
 
 	for (i = 0; i < SH_KEYSC_MAXKEYS; i++) {
@@ -206,7 +199,7 @@ static int __devinit sh_keysc_probe(struct platform_device *pdev)
 	error = input_register_device(input);
 	if (error) {
 		dev_err(&pdev->dev, "failed to register input device\n");
-		goto err5;
+		goto err4;
 	}
 
 	iowrite16((sh_keysc_mode[pdata->mode].kymd << 8) |
@@ -214,14 +207,12 @@ static int __devinit sh_keysc_probe(struct platform_device *pdev)
 	iowrite16(0, priv->iomem_base + KYOUTDR_OFFS);
 	iowrite16(KYCR2_IRQ_LEVEL, priv->iomem_base + KYCR2_OFFS);
 	return 0;
- err5:
-	free_irq(irq, pdev);
  err4:
-	input_free_device(input);
+	free_irq(irq, pdev);
  err3:
-	iounmap(priv->iomem_base);
+	input_free_device(input);
  err2:
-	release_mem_region(res->start, res_size(res));
+	iounmap(priv->iomem_base);
  err1:
 	platform_set_drvdata(pdev, NULL);
 	kfree(priv);
@@ -232,7 +223,6 @@ static int __devinit sh_keysc_probe(struct platform_device *pdev)
 static int __devexit sh_keysc_remove(struct platform_device *pdev)
 {
 	struct sh_keysc_priv *priv = platform_get_drvdata(pdev);
-	struct resource *res;
 
 	iowrite16(KYCR2_IRQ_DISABLED, priv->iomem_base + KYCR2_OFFS);
 
@@ -240,9 +230,6 @@ static int __devexit sh_keysc_remove(struct platform_device *pdev)
 	free_irq(platform_get_irq(pdev, 0), pdev);
 	iounmap(priv->iomem_base);
 
-	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	release_mem_region(res->start, res_size(res));
-
 	platform_set_drvdata(pdev, NULL);
 	kfree(priv);
 	return 0;
diff --git a/drivers/input/keyboard/spitzkbd.c b/drivers/input/keyboard/spitzkbd.c
index 1aa37181c40f..de67b8e0a799 100644
--- a/drivers/input/keyboard/spitzkbd.c
+++ b/drivers/input/keyboard/spitzkbd.c
@@ -20,10 +20,10 @@
 #include <linux/module.h>
 #include <linux/slab.h>
 
-#include <asm/arch/spitz.h>
-#include <asm/arch/hardware.h>
-#include <asm/arch/pxa-regs.h>
-#include <asm/arch/pxa2xx-gpio.h>
+#include <mach/spitz.h>
+#include <mach/hardware.h>
+#include <mach/pxa-regs.h>
+#include <mach/pxa2xx-gpio.h>
 
 #define KB_ROWS			7
 #define KB_COLS			11
diff --git a/drivers/input/keyboard/tosakbd.c b/drivers/input/keyboard/tosakbd.c
index b12b7ee4b6aa..44cb50af3ce9 100644
--- a/drivers/input/keyboard/tosakbd.c
+++ b/drivers/input/keyboard/tosakbd.c
@@ -19,8 +19,8 @@
 #include <linux/delay.h>
 #include <linux/interrupt.h>
 
-#include <asm/arch/gpio.h>
-#include <asm/arch/tosa.h>
+#include <mach/gpio.h>
+#include <mach/tosa.h>
 
 #define KB_ROWMASK(r)		(1 << (r))
 #define SCANCODE(r, c)		(((r)<<4) + (c) + 1)
diff --git a/drivers/input/misc/cobalt_btns.c b/drivers/input/misc/cobalt_btns.c
index 6a1f48b76e32..2adf9cb265da 100644
--- a/drivers/input/misc/cobalt_btns.c
+++ b/drivers/input/misc/cobalt_btns.c
@@ -148,6 +148,9 @@ static int __devexit cobalt_buttons_remove(struct platform_device *pdev)
 	return 0;
 }
 
+MODULE_AUTHOR("Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>");
+MODULE_DESCRIPTION("Cobalt button interface driver");
+MODULE_LICENSE("GPL");
 /* work with hotplug and coldplug */
 MODULE_ALIAS("platform:Cobalt buttons");
 
diff --git a/drivers/input/misc/ixp4xx-beeper.c b/drivers/input/misc/ixp4xx-beeper.c
index 798d84c44d03..9946d73624b9 100644
--- a/drivers/input/misc/ixp4xx-beeper.c
+++ b/drivers/input/misc/ixp4xx-beeper.c
@@ -20,7 +20,7 @@
 #include <linux/delay.h>
 #include <linux/platform_device.h>
 #include <linux/interrupt.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 
 MODULE_AUTHOR("Alessandro Zummo <a.zummo@towertech.it>");
 MODULE_DESCRIPTION("ixp4xx beeper driver");
diff --git a/drivers/input/misc/uinput.c b/drivers/input/misc/uinput.c
index 2bcfa0b35061..223d56d5555b 100644
--- a/drivers/input/misc/uinput.c
+++ b/drivers/input/misc/uinput.c
@@ -37,7 +37,6 @@
 #include <linux/fs.h>
 #include <linux/miscdevice.h>
 #include <linux/uinput.h>
-#include <linux/smp_lock.h>
 
 static int uinput_dev_event(struct input_dev *dev, unsigned int type, unsigned int code, int value)
 {
diff --git a/drivers/input/mouse/Kconfig b/drivers/input/mouse/Kconfig
index 7bbea097cda2..f996546fc443 100644
--- a/drivers/input/mouse/Kconfig
+++ b/drivers/input/mouse/Kconfig
@@ -130,6 +130,29 @@ config MOUSE_APPLETOUCH
 	  To compile this driver as a module, choose M here: the
 	  module will be called appletouch.
 
+config MOUSE_BCM5974
+	tristate "Apple USB BCM5974 Multitouch trackpad support"
+	depends on USB_ARCH_HAS_HCD
+	select USB
+	help
+	  Say Y here if you have an Apple USB BCM5974 Multitouch
+	  trackpad.
+
+	  The BCM5974 is the multitouch trackpad found in the Macbook
+	  Air (JAN2008) and Macbook Pro Penryn (FEB2008) laptops.
+
+	  It is also found in the IPhone (2007) and Ipod Touch (2008).
+
+	  This driver provides multitouch functionality together with
+	  the synaptics X11 driver.
+
+	  The interface is currently identical to the appletouch interface,
+	  for further information, see
+	  <file:Documentation/input/appletouch.txt>.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called bcm5974.
+
 config MOUSE_INPORT
 	tristate "InPort/MS/ATIXL busmouse"
 	depends on ISA
diff --git a/drivers/input/mouse/Makefile b/drivers/input/mouse/Makefile
index 9e6e36330820..d4d202516090 100644
--- a/drivers/input/mouse/Makefile
+++ b/drivers/input/mouse/Makefile
@@ -6,6 +6,7 @@
 
 obj-$(CONFIG_MOUSE_AMIGA)	+= amimouse.o
 obj-$(CONFIG_MOUSE_APPLETOUCH)	+= appletouch.o
+obj-$(CONFIG_MOUSE_BCM5974)	+= bcm5974.o
 obj-$(CONFIG_MOUSE_ATARI)	+= atarimouse.o
 obj-$(CONFIG_MOUSE_RISCPC)	+= rpcmouse.o
 obj-$(CONFIG_MOUSE_INPORT)	+= inport.o
diff --git a/drivers/input/mouse/bcm5974.c b/drivers/input/mouse/bcm5974.c
new file mode 100644
index 000000000000..2ec921bf3c60
--- /dev/null
+++ b/drivers/input/mouse/bcm5974.c
@@ -0,0 +1,681 @@
+/*
+ * Apple USB BCM5974 (Macbook Air and Penryn Macbook Pro) multitouch driver
+ *
+ * Copyright (C) 2008	   Henrik Rydberg (rydberg@euromail.se)
+ *
+ * The USB initialization and package decoding was made by
+ * Scott Shawcroft as part of the touchd user-space driver project:
+ * Copyright (C) 2008	   Scott Shawcroft (scott.shawcroft@gmail.com)
+ *
+ * The BCM5974 driver is based on the appletouch driver:
+ * Copyright (C) 2001-2004 Greg Kroah-Hartman (greg@kroah.com)
+ * Copyright (C) 2005      Johannes Berg (johannes@sipsolutions.net)
+ * Copyright (C) 2005	   Stelian Pop (stelian@popies.net)
+ * Copyright (C) 2005	   Frank Arnold (frank@scirocco-5v-turbo.de)
+ * Copyright (C) 2005	   Peter Osterlund (petero2@telia.com)
+ * Copyright (C) 2005	   Michael Hanselmann (linux-kernel@hansmi.ch)
+ * Copyright (C) 2006	   Nicolas Boichat (nicolas@boichat.ch)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/module.h>
+#include <linux/usb/input.h>
+#include <linux/hid.h>
+#include <linux/mutex.h>
+
+#define USB_VENDOR_ID_APPLE		0x05ac
+
+/* MacbookAir, aka wellspring */
+#define USB_DEVICE_ID_APPLE_WELLSPRING_ANSI	0x0223
+#define USB_DEVICE_ID_APPLE_WELLSPRING_ISO	0x0224
+#define USB_DEVICE_ID_APPLE_WELLSPRING_JIS	0x0225
+/* MacbookProPenryn, aka wellspring2 */
+#define USB_DEVICE_ID_APPLE_WELLSPRING2_ANSI	0x0230
+#define USB_DEVICE_ID_APPLE_WELLSPRING2_ISO	0x0231
+#define USB_DEVICE_ID_APPLE_WELLSPRING2_JIS	0x0232
+
+#define BCM5974_DEVICE(prod) {					\
+	.match_flags = (USB_DEVICE_ID_MATCH_DEVICE |		\
+			USB_DEVICE_ID_MATCH_INT_CLASS |		\
+			USB_DEVICE_ID_MATCH_INT_PROTOCOL),	\
+	.idVendor = USB_VENDOR_ID_APPLE,			\
+	.idProduct = (prod),					\
+	.bInterfaceClass = USB_INTERFACE_CLASS_HID,		\
+	.bInterfaceProtocol = USB_INTERFACE_PROTOCOL_MOUSE	\
+}
+
+/* table of devices that work with this driver */
+static const struct usb_device_id bcm5974_table [] = {
+	/* MacbookAir1.1 */
+	BCM5974_DEVICE(USB_DEVICE_ID_APPLE_WELLSPRING_ANSI),
+	BCM5974_DEVICE(USB_DEVICE_ID_APPLE_WELLSPRING_ISO),
+	BCM5974_DEVICE(USB_DEVICE_ID_APPLE_WELLSPRING_JIS),
+	/* MacbookProPenryn */
+	BCM5974_DEVICE(USB_DEVICE_ID_APPLE_WELLSPRING2_ANSI),
+	BCM5974_DEVICE(USB_DEVICE_ID_APPLE_WELLSPRING2_ISO),
+	BCM5974_DEVICE(USB_DEVICE_ID_APPLE_WELLSPRING2_JIS),
+	/* Terminating entry */
+	{}
+};
+MODULE_DEVICE_TABLE(usb, bcm5974_table);
+
+MODULE_AUTHOR("Henrik Rydberg");
+MODULE_DESCRIPTION("Apple USB BCM5974 multitouch driver");
+MODULE_LICENSE("GPL");
+
+#define dprintk(level, format, a...)\
+	{ if (debug >= level) printk(KERN_DEBUG format, ##a); }
+
+static int debug = 1;
+module_param(debug, int, 0644);
+MODULE_PARM_DESC(debug, "Activate debugging output");
+
+/* button data structure */
+struct bt_data {
+	u8 unknown1;		/* constant */
+	u8 button;		/* left button */
+	u8 rel_x;		/* relative x coordinate */
+	u8 rel_y;		/* relative y coordinate */
+};
+
+/* trackpad header structure */
+struct tp_header {
+	u8 unknown1[16];	/* constants, timers, etc */
+	u8 fingers;		/* number of fingers on trackpad */
+	u8 unknown2[9];		/* constants, timers, etc */
+};
+
+/* trackpad finger structure */
+struct tp_finger {
+	__le16 origin;		/* left/right origin? */
+	__le16 abs_x;		/* absolute x coodinate */
+	__le16 abs_y;		/* absolute y coodinate */
+	__le16 rel_x;		/* relative x coodinate */
+	__le16 rel_y;		/* relative y coodinate */
+	__le16 size_major;	/* finger size, major axis? */
+	__le16 size_minor;	/* finger size, minor axis? */
+	__le16 orientation;	/* 16384 when point, else 15 bit angle */
+	__le16 force_major;	/* trackpad force, major axis? */
+	__le16 force_minor;	/* trackpad force, minor axis? */
+	__le16 unused[3];	/* zeros */
+	__le16 multi;		/* one finger: varies, more fingers: constant */
+};
+
+/* trackpad data structure, empirically at least ten fingers */
+struct tp_data {
+	struct tp_header header;
+	struct tp_finger finger[16];
+};
+
+/* device-specific parameters */
+struct bcm5974_param {
+	int dim;		/* logical dimension */
+	int fuzz;		/* logical noise value */
+	int devmin;		/* device minimum reading */
+	int devmax;		/* device maximum reading */
+};
+
+/* device-specific configuration */
+struct bcm5974_config {
+	int ansi, iso, jis;	/* the product id of this device */
+	int bt_ep;		/* the endpoint of the button interface */
+	int bt_datalen;		/* data length of the button interface */
+	int tp_ep;		/* the endpoint of the trackpad interface */
+	int tp_datalen;		/* data length of the trackpad interface */
+	struct bcm5974_param p;	/* finger pressure limits */
+	struct bcm5974_param w;	/* finger width limits */
+	struct bcm5974_param x;	/* horizontal limits */
+	struct bcm5974_param y;	/* vertical limits */
+};
+
+/* logical device structure */
+struct bcm5974 {
+	char phys[64];
+	struct usb_device *udev;	/* usb device */
+	struct usb_interface *intf;	/* our interface */
+	struct input_dev *input;	/* input dev */
+	struct bcm5974_config cfg;	/* device configuration */
+	struct mutex pm_mutex;		/* serialize access to open/suspend */
+	int opened;			/* 1: opened, 0: closed */
+	struct urb *bt_urb;		/* button usb request block */
+	struct bt_data *bt_data;	/* button transferred data */
+	struct urb *tp_urb;		/* trackpad usb request block */
+	struct tp_data *tp_data;	/* trackpad transferred data */
+};
+
+/* logical dimensions */
+#define DIM_PRESSURE	256		/* maximum finger pressure */
+#define DIM_WIDTH	16		/* maximum finger width */
+#define DIM_X		1280		/* maximum trackpad x value */
+#define DIM_Y		800		/* maximum trackpad y value */
+
+/* logical signal quality */
+#define SN_PRESSURE	45		/* pressure signal-to-noise ratio */
+#define SN_WIDTH	100		/* width signal-to-noise ratio */
+#define SN_COORD	250		/* coordinate signal-to-noise ratio */
+
+/* device constants */
+static const struct bcm5974_config bcm5974_config_table[] = {
+	{
+		USB_DEVICE_ID_APPLE_WELLSPRING_ANSI,
+		USB_DEVICE_ID_APPLE_WELLSPRING_ISO,
+		USB_DEVICE_ID_APPLE_WELLSPRING_JIS,
+		0x84, sizeof(struct bt_data),
+		0x81, sizeof(struct tp_data),
+		{ DIM_PRESSURE, DIM_PRESSURE / SN_PRESSURE, 0, 256 },
+		{ DIM_WIDTH, DIM_WIDTH / SN_WIDTH, 0, 2048 },
+		{ DIM_X, DIM_X / SN_COORD, -4824, 5342 },
+		{ DIM_Y, DIM_Y / SN_COORD, -172, 5820 }
+	},
+	{
+		USB_DEVICE_ID_APPLE_WELLSPRING2_ANSI,
+		USB_DEVICE_ID_APPLE_WELLSPRING2_ISO,
+		USB_DEVICE_ID_APPLE_WELLSPRING2_JIS,
+		0x84, sizeof(struct bt_data),
+		0x81, sizeof(struct tp_data),
+		{ DIM_PRESSURE, DIM_PRESSURE / SN_PRESSURE, 0, 256 },
+		{ DIM_WIDTH, DIM_WIDTH / SN_WIDTH, 0, 2048 },
+		{ DIM_X, DIM_X / SN_COORD, -4824, 4824 },
+		{ DIM_Y, DIM_Y / SN_COORD, -172, 4290 }
+	},
+	{}
+};
+
+/* return the device-specific configuration by device */
+static const struct bcm5974_config *bcm5974_get_config(struct usb_device *udev)
+{
+	u16 id = le16_to_cpu(udev->descriptor.idProduct);
+	const struct bcm5974_config *cfg;
+
+	for (cfg = bcm5974_config_table; cfg->ansi; ++cfg)
+		if (cfg->ansi == id || cfg->iso == id || cfg->jis == id)
+			return cfg;
+
+	return bcm5974_config_table;
+}
+
+/* convert 16-bit little endian to signed integer */
+static inline int raw2int(__le16 x)
+{
+	return (signed short)le16_to_cpu(x);
+}
+
+/* scale device data to logical dimensions (asserts devmin < devmax) */
+static inline int int2scale(const struct bcm5974_param *p, int x)
+{
+	return x * p->dim / (p->devmax - p->devmin);
+}
+
+/* all logical value ranges are [0,dim). */
+static inline int int2bound(const struct bcm5974_param *p, int x)
+{
+	int s = int2scale(p, x);
+
+	return clamp_val(s, 0, p->dim - 1);
+}
+
+/* setup which logical events to report */
+static void setup_events_to_report(struct input_dev *input_dev,
+				   const struct bcm5974_config *cfg)
+{
+	__set_bit(EV_ABS, input_dev->evbit);
+
+	input_set_abs_params(input_dev, ABS_PRESSURE,
+				0, cfg->p.dim, cfg->p.fuzz, 0);
+	input_set_abs_params(input_dev, ABS_TOOL_WIDTH,
+				0, cfg->w.dim, cfg->w.fuzz, 0);
+	input_set_abs_params(input_dev, ABS_X,
+				0, cfg->x.dim, cfg->x.fuzz, 0);
+	input_set_abs_params(input_dev, ABS_Y,
+				0, cfg->y.dim, cfg->y.fuzz, 0);
+
+	__set_bit(EV_KEY, input_dev->evbit);
+	__set_bit(BTN_TOOL_FINGER, input_dev->keybit);
+	__set_bit(BTN_TOOL_DOUBLETAP, input_dev->keybit);
+	__set_bit(BTN_TOOL_TRIPLETAP, input_dev->keybit);
+	__set_bit(BTN_LEFT, input_dev->keybit);
+}
+
+/* report button data as logical button state */
+static int report_bt_state(struct bcm5974 *dev, int size)
+{
+	if (size != sizeof(struct bt_data))
+		return -EIO;
+
+	input_report_key(dev->input, BTN_LEFT, dev->bt_data->button);
+	input_sync(dev->input);
+
+	return 0;
+}
+
+/* report trackpad data as logical trackpad state */
+static int report_tp_state(struct bcm5974 *dev, int size)
+{
+	const struct bcm5974_config *c = &dev->cfg;
+	const struct tp_finger *f = dev->tp_data->finger;
+	struct input_dev *input = dev->input;
+	const int fingers = (size - 26) / 28;
+	int p = 0, w, x, y, n = 0;
+
+	if (size < 26 || (size - 26) % 28 != 0)
+		return -EIO;
+
+	if (fingers) {
+		p = raw2int(f->force_major);
+		w = raw2int(f->size_major);
+		x = raw2int(f->abs_x);
+		y = raw2int(f->abs_y);
+		n = p > 0 ? fingers : 0;
+
+		dprintk(9,
+			"bcm5974: p: %+05d w: %+05d x: %+05d y: %+05d n: %d\n",
+			p, w, x, y, n);
+
+		input_report_abs(input, ABS_TOOL_WIDTH, int2bound(&c->w, w));
+		input_report_abs(input, ABS_X, int2bound(&c->x, x - c->x.devmin));
+		input_report_abs(input, ABS_Y, int2bound(&c->y, c->y.devmax - y));
+	}
+
+	input_report_abs(input, ABS_PRESSURE, int2bound(&c->p, p));
+
+	input_report_key(input, BTN_TOOL_FINGER, n == 1);
+	input_report_key(input, BTN_TOOL_DOUBLETAP, n == 2);
+	input_report_key(input, BTN_TOOL_TRIPLETAP, n > 2);
+
+	input_sync(input);
+
+	return 0;
+}
+
+/* Wellspring initialization constants */
+#define BCM5974_WELLSPRING_MODE_READ_REQUEST_ID		1
+#define BCM5974_WELLSPRING_MODE_WRITE_REQUEST_ID	9
+#define BCM5974_WELLSPRING_MODE_REQUEST_VALUE		0x300
+#define BCM5974_WELLSPRING_MODE_REQUEST_INDEX		0
+#define BCM5974_WELLSPRING_MODE_VENDOR_VALUE		0x01
+
+static int bcm5974_wellspring_mode(struct bcm5974 *dev)
+{
+	char *data = kmalloc(8, GFP_KERNEL);
+	int retval = 0, size;
+
+	if (!data) {
+		err("bcm5974: out of memory");
+		retval = -ENOMEM;
+		goto out;
+	}
+
+	/* read configuration */
+	size = usb_control_msg(dev->udev, usb_rcvctrlpipe(dev->udev, 0),
+			BCM5974_WELLSPRING_MODE_READ_REQUEST_ID,
+			USB_DIR_IN | USB_TYPE_CLASS | USB_RECIP_INTERFACE,
+			BCM5974_WELLSPRING_MODE_REQUEST_VALUE,
+			BCM5974_WELLSPRING_MODE_REQUEST_INDEX, data, 8, 5000);
+
+	if (size != 8) {
+		err("bcm5974: could not read from device");
+		retval = -EIO;
+		goto out;
+	}
+
+	/* apply the mode switch */
+	data[0] = BCM5974_WELLSPRING_MODE_VENDOR_VALUE;
+
+	/* write configuration */
+	size = usb_control_msg(dev->udev, usb_sndctrlpipe(dev->udev, 0),
+			BCM5974_WELLSPRING_MODE_WRITE_REQUEST_ID,
+			USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_INTERFACE,
+			BCM5974_WELLSPRING_MODE_REQUEST_VALUE,
+			BCM5974_WELLSPRING_MODE_REQUEST_INDEX, data, 8, 5000);
+
+	if (size != 8) {
+		err("bcm5974: could not write to device");
+		retval = -EIO;
+		goto out;
+	}
+
+	dprintk(2, "bcm5974: switched to wellspring mode.\n");
+
+ out:
+	kfree(data);
+	return retval;
+}
+
+static void bcm5974_irq_button(struct urb *urb)
+{
+	struct bcm5974 *dev = urb->context;
+	int error;
+
+	switch (urb->status) {
+	case 0:
+		break;
+	case -EOVERFLOW:
+	case -ECONNRESET:
+	case -ENOENT:
+	case -ESHUTDOWN:
+		dbg("bcm5974: button urb shutting down: %d", urb->status);
+		return;
+	default:
+		dbg("bcm5974: button urb status: %d", urb->status);
+		goto exit;
+	}
+
+	if (report_bt_state(dev, dev->bt_urb->actual_length))
+		dprintk(1, "bcm5974: bad button package, length: %d\n",
+			dev->bt_urb->actual_length);
+
+exit:
+	error = usb_submit_urb(dev->bt_urb, GFP_ATOMIC);
+	if (error)
+		err("bcm5974: button urb failed: %d", error);
+}
+
+static void bcm5974_irq_trackpad(struct urb *urb)
+{
+	struct bcm5974 *dev = urb->context;
+	int error;
+
+	switch (urb->status) {
+	case 0:
+		break;
+	case -EOVERFLOW:
+	case -ECONNRESET:
+	case -ENOENT:
+	case -ESHUTDOWN:
+		dbg("bcm5974: trackpad urb shutting down: %d", urb->status);
+		return;
+	default:
+		dbg("bcm5974: trackpad urb status: %d", urb->status);
+		goto exit;
+	}
+
+	/* control response ignored */
+	if (dev->tp_urb->actual_length == 2)
+		goto exit;
+
+	if (report_tp_state(dev, dev->tp_urb->actual_length))
+		dprintk(1, "bcm5974: bad trackpad package, length: %d\n",
+			dev->tp_urb->actual_length);
+
+exit:
+	error = usb_submit_urb(dev->tp_urb, GFP_ATOMIC);
+	if (error)
+		err("bcm5974: trackpad urb failed: %d", error);
+}
+
+/*
+ * The Wellspring trackpad, like many recent Apple trackpads, share
+ * the usb device with the keyboard. Since keyboards are usually
+ * handled by the HID system, the device ends up being handled by two
+ * modules. Setting up the device therefore becomes slightly
+ * complicated. To enable multitouch features, a mode switch is
+ * required, which is usually applied via the control interface of the
+ * device.  It can be argued where this switch should take place. In
+ * some drivers, like appletouch, the switch is made during
+ * probe. However, the hid module may also alter the state of the
+ * device, resulting in trackpad malfunction under certain
+ * circumstances. To get around this problem, there is at least one
+ * example that utilizes the USB_QUIRK_RESET_RESUME quirk in order to
+ * recieve a reset_resume request rather than the normal resume.
+ * Since the implementation of reset_resume is equal to mode switch
+ * plus start_traffic, it seems easier to always do the switch when
+ * starting traffic on the device.
+ */
+static int bcm5974_start_traffic(struct bcm5974 *dev)
+{
+	if (bcm5974_wellspring_mode(dev)) {
+		dprintk(1, "bcm5974: mode switch failed\n");
+		goto error;
+	}
+
+	if (usb_submit_urb(dev->bt_urb, GFP_KERNEL))
+		goto error;
+
+	if (usb_submit_urb(dev->tp_urb, GFP_KERNEL))
+		goto err_kill_bt;
+
+	return 0;
+
+err_kill_bt:
+	usb_kill_urb(dev->bt_urb);
+error:
+	return -EIO;
+}
+
+static void bcm5974_pause_traffic(struct bcm5974 *dev)
+{
+	usb_kill_urb(dev->tp_urb);
+	usb_kill_urb(dev->bt_urb);
+}
+
+/*
+ * The code below implements open/close and manual suspend/resume.
+ * All functions may be called in random order.
+ *
+ * Opening a suspended device fails with EACCES - permission denied.
+ *
+ * Failing a resume leaves the device resumed but closed.
+ */
+static int bcm5974_open(struct input_dev *input)
+{
+	struct bcm5974 *dev = input_get_drvdata(input);
+	int error;
+
+	error = usb_autopm_get_interface(dev->intf);
+	if (error)
+		return error;
+
+	mutex_lock(&dev->pm_mutex);
+
+	error = bcm5974_start_traffic(dev);
+	if (!error)
+		dev->opened = 1;
+
+	mutex_unlock(&dev->pm_mutex);
+
+	if (error)
+		usb_autopm_put_interface(dev->intf);
+
+	return error;
+}
+
+static void bcm5974_close(struct input_dev *input)
+{
+	struct bcm5974 *dev = input_get_drvdata(input);
+
+	mutex_lock(&dev->pm_mutex);
+
+	bcm5974_pause_traffic(dev);
+	dev->opened = 0;
+
+	mutex_unlock(&dev->pm_mutex);
+
+	usb_autopm_put_interface(dev->intf);
+}
+
+static int bcm5974_suspend(struct usb_interface *iface, pm_message_t message)
+{
+	struct bcm5974 *dev = usb_get_intfdata(iface);
+
+	mutex_lock(&dev->pm_mutex);
+
+	if (dev->opened)
+		bcm5974_pause_traffic(dev);
+
+	mutex_unlock(&dev->pm_mutex);
+
+	return 0;
+}
+
+static int bcm5974_resume(struct usb_interface *iface)
+{
+	struct bcm5974 *dev = usb_get_intfdata(iface);
+	int error = 0;
+
+	mutex_lock(&dev->pm_mutex);
+
+	if (dev->opened)
+		error = bcm5974_start_traffic(dev);
+
+	mutex_unlock(&dev->pm_mutex);
+
+	return error;
+}
+
+static int bcm5974_probe(struct usb_interface *iface,
+			 const struct usb_device_id *id)
+{
+	struct usb_device *udev = interface_to_usbdev(iface);
+	const struct bcm5974_config *cfg;
+	struct bcm5974 *dev;
+	struct input_dev *input_dev;
+	int error = -ENOMEM;
+
+	/* find the product index */
+	cfg = bcm5974_get_config(udev);
+
+	/* allocate memory for our device state and initialize it */
+	dev = kzalloc(sizeof(struct bcm5974), GFP_KERNEL);
+	input_dev = input_allocate_device();
+	if (!dev || !input_dev) {
+		err("bcm5974: out of memory");
+		goto err_free_devs;
+	}
+
+	dev->udev = udev;
+	dev->intf = iface;
+	dev->input = input_dev;
+	dev->cfg = *cfg;
+	mutex_init(&dev->pm_mutex);
+
+	/* setup urbs */
+	dev->bt_urb = usb_alloc_urb(0, GFP_KERNEL);
+	if (!dev->bt_urb)
+		goto err_free_devs;
+
+	dev->tp_urb = usb_alloc_urb(0, GFP_KERNEL);
+	if (!dev->tp_urb)
+		goto err_free_bt_urb;
+
+	dev->bt_data = usb_buffer_alloc(dev->udev,
+					dev->cfg.bt_datalen, GFP_KERNEL,
+					&dev->bt_urb->transfer_dma);
+	if (!dev->bt_data)
+		goto err_free_urb;
+
+	dev->tp_data = usb_buffer_alloc(dev->udev,
+					dev->cfg.tp_datalen, GFP_KERNEL,
+					&dev->tp_urb->transfer_dma);
+	if (!dev->tp_data)
+		goto err_free_bt_buffer;
+
+	usb_fill_int_urb(dev->bt_urb, udev,
+			 usb_rcvintpipe(udev, cfg->bt_ep),
+			 dev->bt_data, dev->cfg.bt_datalen,
+			 bcm5974_irq_button, dev, 1);
+
+	usb_fill_int_urb(dev->tp_urb, udev,
+			 usb_rcvintpipe(udev, cfg->tp_ep),
+			 dev->tp_data, dev->cfg.tp_datalen,
+			 bcm5974_irq_trackpad, dev, 1);
+
+	/* create bcm5974 device */
+	usb_make_path(udev, dev->phys, sizeof(dev->phys));
+	strlcat(dev->phys, "/input0", sizeof(dev->phys));
+
+	input_dev->name = "bcm5974";
+	input_dev->phys = dev->phys;
+	usb_to_input_id(dev->udev, &input_dev->id);
+	input_dev->dev.parent = &iface->dev;
+
+	input_set_drvdata(input_dev, dev);
+
+	input_dev->open = bcm5974_open;
+	input_dev->close = bcm5974_close;
+
+	setup_events_to_report(input_dev, cfg);
+
+	error = input_register_device(dev->input);
+	if (error)
+		goto err_free_buffer;
+
+	/* save our data pointer in this interface device */
+	usb_set_intfdata(iface, dev);
+
+	return 0;
+
+err_free_buffer:
+	usb_buffer_free(dev->udev, dev->cfg.tp_datalen,
+		dev->tp_data, dev->tp_urb->transfer_dma);
+err_free_bt_buffer:
+	usb_buffer_free(dev->udev, dev->cfg.bt_datalen,
+		dev->bt_data, dev->bt_urb->transfer_dma);
+err_free_urb:
+	usb_free_urb(dev->tp_urb);
+err_free_bt_urb:
+	usb_free_urb(dev->bt_urb);
+err_free_devs:
+	usb_set_intfdata(iface, NULL);
+	input_free_device(input_dev);
+	kfree(dev);
+	return error;
+}
+
+static void bcm5974_disconnect(struct usb_interface *iface)
+{
+	struct bcm5974 *dev = usb_get_intfdata(iface);
+
+	usb_set_intfdata(iface, NULL);
+
+	input_unregister_device(dev->input);
+	usb_buffer_free(dev->udev, dev->cfg.tp_datalen,
+			dev->tp_data, dev->tp_urb->transfer_dma);
+	usb_buffer_free(dev->udev, dev->cfg.bt_datalen,
+			dev->bt_data, dev->bt_urb->transfer_dma);
+	usb_free_urb(dev->tp_urb);
+	usb_free_urb(dev->bt_urb);
+	kfree(dev);
+}
+
+static struct usb_driver bcm5974_driver = {
+	.name			= "bcm5974",
+	.probe			= bcm5974_probe,
+	.disconnect		= bcm5974_disconnect,
+	.suspend		= bcm5974_suspend,
+	.resume			= bcm5974_resume,
+	.reset_resume		= bcm5974_resume,
+	.id_table		= bcm5974_table,
+	.supports_autosuspend	= 1,
+};
+
+static int __init bcm5974_init(void)
+{
+	return usb_register(&bcm5974_driver);
+}
+
+static void __exit bcm5974_exit(void)
+{
+	usb_deregister(&bcm5974_driver);
+}
+
+module_init(bcm5974_init);
+module_exit(bcm5974_exit);
+
diff --git a/drivers/input/mouse/gpio_mouse.c b/drivers/input/mouse/gpio_mouse.c
index 339290184871..72cf5e33790e 100644
--- a/drivers/input/mouse/gpio_mouse.c
+++ b/drivers/input/mouse/gpio_mouse.c
@@ -9,7 +9,6 @@
  */
 
 #include <linux/init.h>
-#include <linux/version.h>
 #include <linux/module.h>
 #include <linux/platform_device.h>
 #include <linux/input-polldev.h>
diff --git a/drivers/input/mouse/rpcmouse.c b/drivers/input/mouse/rpcmouse.c
index 18a48636ba4a..56c079ef5018 100644
--- a/drivers/input/mouse/rpcmouse.c
+++ b/drivers/input/mouse/rpcmouse.c
@@ -23,7 +23,7 @@
 #include <linux/init.h>
 #include <linux/input.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/irq.h>
 #include <asm/io.h>
 #include <asm/hardware/iomd.h>
diff --git a/drivers/input/serio/hp_sdc.c b/drivers/input/serio/hp_sdc.c
index aad664d5259f..0d395979b2d1 100644
--- a/drivers/input/serio/hp_sdc.c
+++ b/drivers/input/serio/hp_sdc.c
@@ -70,7 +70,6 @@
 #include <linux/semaphore.h>
 #include <linux/slab.h>
 #include <linux/hil.h>
-#include <linux/semaphore.h>
 #include <asm/io.h>
 #include <asm/system.h>
 
diff --git a/drivers/input/serio/i8042-sparcio.h b/drivers/input/serio/i8042-sparcio.h
index d9ca55891cd7..692a79ec2a22 100644
--- a/drivers/input/serio/i8042-sparcio.h
+++ b/drivers/input/serio/i8042-sparcio.h
@@ -1,10 +1,11 @@
 #ifndef _I8042_SPARCIO_H
 #define _I8042_SPARCIO_H
 
+#include <linux/of_device.h>
+
 #include <asm/io.h>
 #include <asm/oplib.h>
 #include <asm/prom.h>
-#include <asm/of_device.h>
 
 static int i8042_kbd_irq = -1;
 static int i8042_aux_irq = -1;
@@ -41,6 +42,8 @@ static inline void i8042_write_command(int val)
 	writeb(val, kbd_iobase + 0x64UL);
 }
 
+#ifdef CONFIG_PCI
+
 #define OBP_PS2KBD_NAME1	"kb_ps2"
 #define OBP_PS2KBD_NAME2	"keyboard"
 #define OBP_PS2MS_NAME1		"kdmouse"
@@ -101,9 +104,6 @@ static struct of_platform_driver sparc_i8042_driver = {
 
 static int __init i8042_platform_init(void)
 {
-#ifndef CONFIG_PCI
-	return -ENODEV;
-#else
 	struct device_node *root = of_find_node_by_path("/");
 
 	if (!strcmp(root->name, "SUNW,JavaStation-1")) {
@@ -131,17 +131,25 @@ static int __init i8042_platform_init(void)
 	i8042_reset = 1;
 
 	return 0;
-#endif /* CONFIG_PCI */
 }
 
 static inline void i8042_platform_exit(void)
 {
-#ifdef CONFIG_PCI
 	struct device_node *root = of_find_node_by_path("/");
 
 	if (strcmp(root->name, "SUNW,JavaStation-1"))
 		of_unregister_driver(&sparc_i8042_driver);
-#endif
 }
 
+#else /* !CONFIG_PCI */
+static int __init i8042_platform_init(void)
+{
+	return -ENODEV;
+}
+
+static inline void i8042_platform_exit(void)
+{
+}
+#endif /* !CONFIG_PCI */
+
 #endif /* _I8042_SPARCIO_H */
diff --git a/drivers/input/serio/i8042-x86ia64io.h b/drivers/input/serio/i8042-x86ia64io.h
index fe732a574ec2..3282b741e246 100644
--- a/drivers/input/serio/i8042-x86ia64io.h
+++ b/drivers/input/serio/i8042-x86ia64io.h
@@ -394,6 +394,13 @@ static struct dmi_system_id __initdata i8042_dmi_dritek_table[] = {
 			DMI_MATCH(DMI_PRODUCT_NAME, "TravelMate 2490"),
 		},
 	},
+	{
+		.ident = "Acer TravelMate 4280",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Acer"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "TravelMate 4280"),
+		},
+	},
 	{ }
 };
 
diff --git a/drivers/input/serio/rpckbd.c b/drivers/input/serio/rpckbd.c
index 1567b7782478..7f36edd34f8b 100644
--- a/drivers/input/serio/rpckbd.c
+++ b/drivers/input/serio/rpckbd.c
@@ -35,7 +35,7 @@
 #include <linux/platform_device.h>
 
 #include <asm/irq.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 #include <asm/hardware/iomd.h>
 #include <asm/system.h>
diff --git a/drivers/input/serio/serio.c b/drivers/input/serio/serio.c
index 78f2abb5c11b..2f12d60eee3b 100644
--- a/drivers/input/serio/serio.c
+++ b/drivers/input/serio/serio.c
@@ -63,8 +63,9 @@ static LIST_HEAD(serio_list);
 static struct bus_type serio_bus;
 
 static void serio_add_port(struct serio *serio);
-static void serio_reconnect_port(struct serio *serio);
+static int serio_reconnect_port(struct serio *serio);
 static void serio_disconnect_port(struct serio *serio);
+static void serio_reconnect_chain(struct serio *serio);
 static void serio_attach_driver(struct serio_driver *drv);
 
 static int serio_connect_driver(struct serio *serio, struct serio_driver *drv)
@@ -161,6 +162,7 @@ static void serio_find_driver(struct serio *serio)
 enum serio_event_type {
 	SERIO_RESCAN_PORT,
 	SERIO_RECONNECT_PORT,
+	SERIO_RECONNECT_CHAIN,
 	SERIO_REGISTER_PORT,
 	SERIO_ATTACH_DRIVER,
 };
@@ -315,6 +317,10 @@ static void serio_handle_event(void)
 				serio_find_driver(event->object);
 				break;
 
+			case SERIO_RECONNECT_CHAIN:
+				serio_reconnect_chain(event->object);
+				break;
+
 			case SERIO_ATTACH_DRIVER:
 				serio_attach_driver(event->object);
 				break;
@@ -470,7 +476,7 @@ static ssize_t serio_rebind_driver(struct device *dev, struct device_attribute *
 	if (!strncmp(buf, "none", count)) {
 		serio_disconnect_port(serio);
 	} else if (!strncmp(buf, "reconnect", count)) {
-		serio_reconnect_port(serio);
+		serio_reconnect_chain(serio);
 	} else if (!strncmp(buf, "rescan", count)) {
 		serio_disconnect_port(serio);
 		serio_find_driver(serio);
@@ -620,14 +626,30 @@ static void serio_destroy_port(struct serio *serio)
 }
 
 /*
+ * Reconnect serio port (re-initialize attached device).
+ * If reconnect fails (old device is no longer attached or
+ * there was no device to begin with) we do full rescan in
+ * hope of finding a driver for the port.
+ */
+static int serio_reconnect_port(struct serio *serio)
+{
+	int error = serio_reconnect_driver(serio);
+
+	if (error) {
+		serio_disconnect_port(serio);
+		serio_find_driver(serio);
+	}
+
+	return error;
+}
+
+/*
  * Reconnect serio port and all its children (re-initialize attached devices)
  */
-static void serio_reconnect_port(struct serio *serio)
+static void serio_reconnect_chain(struct serio *serio)
 {
 	do {
-		if (serio_reconnect_driver(serio)) {
-			serio_disconnect_port(serio);
-			serio_find_driver(serio);
+		if (serio_reconnect_port(serio)) {
 			/* Ok, old children are now gone, we are done */
 			break;
 		}
@@ -673,7 +695,7 @@ void serio_rescan(struct serio *serio)
 
 void serio_reconnect(struct serio *serio)
 {
-	serio_queue_event(serio, NULL, SERIO_RECONNECT_PORT);
+	serio_queue_event(serio, NULL, SERIO_RECONNECT_CHAIN);
 }
 
 /*
@@ -927,19 +949,16 @@ static int serio_suspend(struct device *dev, pm_message_t state)
 
 static int serio_resume(struct device *dev)
 {
-	struct serio *serio = to_serio_port(dev);
-
-	if (dev->power.power_state.event != PM_EVENT_ON &&
-	    serio_reconnect_driver(serio)) {
-		/*
-		 * Driver re-probing can take a while, so better let kseriod
-		 * deal with it.
-		 */
-		serio_rescan(serio);
+	/*
+	 * Driver reconnect can take a while, so better let kseriod
+	 * deal with it.
+	 */
+	if (dev->power.power_state.event != PM_EVENT_ON) {
+		dev->power.power_state = PMSG_ON;
+		serio_queue_event(to_serio_port(dev), NULL,
+				  SERIO_RECONNECT_PORT);
 	}
 
-	dev->power.power_state = PMSG_ON;
-
 	return 0;
 }
 #endif /* CONFIG_PM */
diff --git a/drivers/input/serio/xilinx_ps2.c b/drivers/input/serio/xilinx_ps2.c
index 0ed044d5e685..765007899d9a 100644
--- a/drivers/input/serio/xilinx_ps2.c
+++ b/drivers/input/serio/xilinx_ps2.c
@@ -269,8 +269,8 @@ static int xps2_setup(struct device *dev, struct resource *regs_res,
 	 * we have the PS2 in a good state */
 	out_be32(drvdata->base_address + XPS2_SRST_OFFSET, XPS2_SRST_RESET);
 
-	dev_info(dev, "Xilinx PS2 at 0x%08X mapped to 0x%08X, irq=%d\n",
-		drvdata->phys_addr, (u32)drvdata->base_address, drvdata->irq);
+	dev_info(dev, "Xilinx PS2 at 0x%08X mapped to 0x%p, irq=%d\n",
+		drvdata->phys_addr, drvdata->base_address, drvdata->irq);
 
 	serio = &drvdata->serio;
 	serio->id.type = SERIO_8042;
diff --git a/drivers/input/tablet/gtco.c b/drivers/input/tablet/gtco.c
index b9b7a98bc5a5..7df0228e836e 100644
--- a/drivers/input/tablet/gtco.c
+++ b/drivers/input/tablet/gtco.c
@@ -64,7 +64,6 @@ Scott Hill shill@gtcocalcomp.com
 #include <asm/byteorder.h>
 
 
-#include <linux/version.h>
 #include <linux/usb/input.h>
 
 /* Version with a Major number of 2 is for kernel inclusion only. */
diff --git a/drivers/input/touchscreen/Kconfig b/drivers/input/touchscreen/Kconfig
index e57366521572..25287e80e236 100644
--- a/drivers/input/touchscreen/Kconfig
+++ b/drivers/input/touchscreen/Kconfig
@@ -205,6 +205,18 @@ config TOUCHSCREEN_TOUCHWIN
 	  To compile this driver as a module, choose M here: the
 	  module will be called touchwin.
 
+config TOUCHSCREEN_ATMEL_TSADCC
+	tristate "Atmel Touchscreen Interface"
+	depends on ARCH_AT91SAM9RL
+	help
+	  Say Y here if you have a 4-wire touchscreen connected to the
+          ADC Controller on your Atmel SoC (such as the AT91SAM9RL).
+
+	  If unsure, say N.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called atmel_tsadcc.
+
 config TOUCHSCREEN_UCB1400
 	tristate "Philips UCB1400 touchscreen"
 	select AC97_BUS
@@ -237,29 +249,26 @@ config TOUCHSCREEN_WM97XX
 config TOUCHSCREEN_WM9705
 	bool "WM9705 Touchscreen interface support"
 	depends on TOUCHSCREEN_WM97XX
+	default y
 	help
-	  Say Y here if you have a Wolfson Microelectronics WM9705
-	  touchscreen controller connected to your system.
-
-	  If unsure, say N.
+	  Say Y here to enable support for the Wolfson Microelectronics
+	  WM9705 touchscreen controller.
 
 config TOUCHSCREEN_WM9712
 	bool "WM9712 Touchscreen interface support"
 	depends on TOUCHSCREEN_WM97XX
+	default y
 	help
-	  Say Y here if you have a Wolfson Microelectronics WM9712
-	  touchscreen controller connected to your system.
-
-	  If unsure, say N.
+	  Say Y here to enable support for the Wolfson Microelectronics
+	  WM9712 touchscreen controller.
 
 config TOUCHSCREEN_WM9713
 	bool "WM9713 Touchscreen interface support"
 	depends on TOUCHSCREEN_WM97XX
+	default y
 	help
-	  Say Y here if you have a Wolfson Microelectronics WM9713 touchscreen
-	  controller connected to your system.
-
-	  If unsure, say N.
+	  Say Y here to enable support for the Wolfson Microelectronics
+	  WM9713 touchscreen controller.
 
 config TOUCHSCREEN_WM97XX_MAINSTONE
 	tristate "WM97xx Mainstone accelerated touch"
diff --git a/drivers/input/touchscreen/Makefile b/drivers/input/touchscreen/Makefile
index 39a804cd80f1..15cf29079489 100644
--- a/drivers/input/touchscreen/Makefile
+++ b/drivers/input/touchscreen/Makefile
@@ -7,6 +7,7 @@
 wm97xx-ts-y := wm97xx-core.o
 
 obj-$(CONFIG_TOUCHSCREEN_ADS7846)	+= ads7846.o
+obj-$(CONFIG_TOUCHSCREEN_ATMEL_TSADCC)	+= atmel_tsadcc.o
 obj-$(CONFIG_TOUCHSCREEN_BITSY)		+= h3600_ts_input.o
 obj-$(CONFIG_TOUCHSCREEN_CORGI)		+= corgi_ts.o
 obj-$(CONFIG_TOUCHSCREEN_GUNZE)		+= gunze.o
diff --git a/drivers/input/touchscreen/ads7846.c b/drivers/input/touchscreen/ads7846.c
index 907a45fe9d40..ce6f48c695f5 100644
--- a/drivers/input/touchscreen/ads7846.c
+++ b/drivers/input/touchscreen/ads7846.c
@@ -517,7 +517,9 @@ static void ads7846_rx(void *ads)
 	if (x == MAX_12BIT)
 		x = 0;
 
-	if (likely(x && z1)) {
+	if (ts->model == 7843) {
+		Rt = ts->pressure_max / 2;
+	} else if (likely(x && z1)) {
 		/* compute touch pressure resistance using equation #2 */
 		Rt = z2;
 		Rt -= z1;
@@ -525,11 +527,9 @@ static void ads7846_rx(void *ads)
 		Rt *= ts->x_plate_ohms;
 		Rt /= z1;
 		Rt = (Rt + 2047) >> 12;
-	} else
+	} else {
 		Rt = 0;
-
-	if (ts->model == 7843)
-		Rt = ts->pressure_max / 2;
+	}
 
 	/* Sample found inconsistent by debouncing or pressure is beyond
 	 * the maximum. Don't report it to user space, repeat at least
@@ -633,19 +633,17 @@ static void ads7846_rx_val(void *ads)
 	struct ads7846 *ts = ads;
 	struct spi_message *m;
 	struct spi_transfer *t;
-	u16 *rx_val;
 	int val;
 	int action;
 	int status;
 
 	m = &ts->msg[ts->msg_idx];
 	t = list_entry(m->transfers.prev, struct spi_transfer, transfer_list);
-	rx_val = t->rx_buf;
 
 	/* adjust:  on-wire is a must-ignore bit, a BE12 value, then padding;
 	 * built from two 8 bit values written msb-first.
 	 */
-	val = be16_to_cpu(*rx_val) >> 3;
+	val = be16_to_cpup((__be16 *)t->rx_buf) >> 3;
 
 	action = ts->filter(ts->filter_data, ts->msg_idx, &val);
 	switch (action) {
@@ -659,7 +657,7 @@ static void ads7846_rx_val(void *ads)
 		m = ts->last_msg;
 		break;
 	case ADS7846_FILTER_OK:
-		*rx_val = val;
+		*(u16 *)t->rx_buf = val;
 		ts->tc.ignore = 0;
 		m = &ts->msg[++ts->msg_idx];
 		break;
diff --git a/drivers/input/touchscreen/atmel_tsadcc.c b/drivers/input/touchscreen/atmel_tsadcc.c
new file mode 100644
index 000000000000..eee126b19e8b
--- /dev/null
+++ b/drivers/input/touchscreen/atmel_tsadcc.c
@@ -0,0 +1,332 @@
+/*
+ *  Atmel Touch Screen Driver
+ *
+ *  Copyright (c) 2008 ATMEL
+ *  Copyright (c) 2008 Dan Liang
+ *  Copyright (c) 2008 TimeSys Corporation
+ *  Copyright (c) 2008 Justin Waters
+ *
+ *  Based on touchscreen code from Atmel Corporation.
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation.
+ */
+#include <linux/init.h>
+#include <linux/err.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/input.h>
+#include <linux/slab.h>
+#include <linux/interrupt.h>
+#include <linux/clk.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+
+/* Register definitions based on AT91SAM9RL64 preliminary draft datasheet */
+
+#define ATMEL_TSADCC_CR		0x00	/* Control register */
+#define   ATMEL_TSADCC_SWRST	(1 << 0)	/* Software Reset*/
+#define	  ATMEL_TSADCC_START	(1 << 1)	/* Start conversion */
+
+#define ATMEL_TSADCC_MR		0x04	/* Mode register */
+#define	  ATMEL_TSADCC_TSAMOD	(3    <<  0)	/* ADC mode */
+#define	    ATMEL_TSADCC_TSAMOD_ADC_ONLY_MODE	(0x0)	/* ADC Mode */
+#define	    ATMEL_TSADCC_TSAMOD_TS_ONLY_MODE	(0x1)	/* Touch Screen Only Mode */
+#define	  ATMEL_TSADCC_LOWRES	(1    <<  4)	/* Resolution selection */
+#define	  ATMEL_TSADCC_SLEEP	(1    <<  5)	/* Sleep mode */
+#define	  ATMEL_TSADCC_PENDET	(1    <<  6)	/* Pen Detect selection */
+#define	  ATMEL_TSADCC_PRESCAL	(0x3f <<  8)	/* Prescalar Rate Selection */
+#define	  ATMEL_TSADCC_STARTUP	(0x7f << 16)	/* Start Up time */
+#define	  ATMEL_TSADCC_SHTIM	(0xf  << 24)	/* Sample & Hold time */
+#define	  ATMEL_TSADCC_PENDBC	(0xf  << 28)	/* Pen Detect debouncing time */
+
+#define ATMEL_TSADCC_TRGR	0x08	/* Trigger register */
+#define	  ATMEL_TSADCC_TRGMOD	(7      <<  0)	/* Trigger mode */
+#define	    ATMEL_TSADCC_TRGMOD_NONE		(0 << 0)
+#define     ATMEL_TSADCC_TRGMOD_EXT_RISING	(1 << 0)
+#define     ATMEL_TSADCC_TRGMOD_EXT_FALLING	(2 << 0)
+#define     ATMEL_TSADCC_TRGMOD_EXT_ANY		(3 << 0)
+#define     ATMEL_TSADCC_TRGMOD_PENDET		(4 << 0)
+#define     ATMEL_TSADCC_TRGMOD_PERIOD		(5 << 0)
+#define     ATMEL_TSADCC_TRGMOD_CONTINUOUS	(6 << 0)
+#define   ATMEL_TSADCC_TRGPER	(0xffff << 16)	/* Trigger period */
+
+#define ATMEL_TSADCC_TSR	0x0C	/* Touch Screen register */
+#define	  ATMEL_TSADCC_TSFREQ	(0xf <<  0)	/* TS Frequency in Interleaved mode */
+#define	  ATMEL_TSADCC_TSSHTIM	(0xf << 24)	/* Sample & Hold time */
+
+#define ATMEL_TSADCC_CHER	0x10	/* Channel Enable register */
+#define ATMEL_TSADCC_CHDR	0x14	/* Channel Disable register */
+#define ATMEL_TSADCC_CHSR	0x18	/* Channel Status register */
+#define	  ATMEL_TSADCC_CH(n)	(1 << (n))	/* Channel number */
+
+#define ATMEL_TSADCC_SR		0x1C	/* Status register */
+#define	  ATMEL_TSADCC_EOC(n)	(1 << ((n)+0))	/* End of conversion for channel N */
+#define	  ATMEL_TSADCC_OVRE(n)	(1 << ((n)+8))	/* Overrun error for channel N */
+#define	  ATMEL_TSADCC_DRDY	(1 << 16)	/* Data Ready */
+#define	  ATMEL_TSADCC_GOVRE	(1 << 17)	/* General Overrun Error */
+#define	  ATMEL_TSADCC_ENDRX	(1 << 18)	/* End of RX Buffer */
+#define	  ATMEL_TSADCC_RXBUFF	(1 << 19)	/* TX Buffer full */
+#define	  ATMEL_TSADCC_PENCNT	(1 << 20)	/* Pen contact */
+#define	  ATMEL_TSADCC_NOCNT	(1 << 21)	/* No contact */
+
+#define ATMEL_TSADCC_LCDR	0x20	/* Last Converted Data register */
+#define	  ATMEL_TSADCC_DATA	(0x3ff << 0)	/* Channel data */
+
+#define ATMEL_TSADCC_IER	0x24	/* Interrupt Enable register */
+#define ATMEL_TSADCC_IDR	0x28	/* Interrupt Disable register */
+#define ATMEL_TSADCC_IMR	0x2C	/* Interrupt Mask register */
+#define ATMEL_TSADCC_CDR0	0x30	/* Channel Data 0 */
+#define ATMEL_TSADCC_CDR1	0x34	/* Channel Data 1 */
+#define ATMEL_TSADCC_CDR2	0x38	/* Channel Data 2 */
+#define ATMEL_TSADCC_CDR3	0x3C	/* Channel Data 3 */
+#define ATMEL_TSADCC_CDR4	0x40	/* Channel Data 4 */
+#define ATMEL_TSADCC_CDR5	0x44	/* Channel Data 5 */
+
+#define ADC_CLOCK	1000000
+
+struct atmel_tsadcc {
+	struct input_dev	*input;
+	char			phys[32];
+	struct clk		*clk;
+	int			irq;
+};
+
+static void __iomem		*tsc_base;
+
+#define atmel_tsadcc_read(reg)		__raw_readl(tsc_base + (reg))
+#define atmel_tsadcc_write(reg, val)	__raw_writel((val), tsc_base + (reg))
+
+static irqreturn_t atmel_tsadcc_interrupt(int irq, void *dev)
+{
+	struct input_dev *input_dev = ((struct atmel_tsadcc *)dev)->input;
+
+	unsigned int absx;
+	unsigned int absy;
+	unsigned int status;
+	unsigned int reg;
+
+	status = atmel_tsadcc_read(ATMEL_TSADCC_SR);
+	status &= atmel_tsadcc_read(ATMEL_TSADCC_IMR);
+
+	if (status & ATMEL_TSADCC_NOCNT) {
+		/* Contact lost */
+		reg = atmel_tsadcc_read(ATMEL_TSADCC_MR) | ATMEL_TSADCC_PENDBC;
+
+		atmel_tsadcc_write(ATMEL_TSADCC_MR, reg);
+		atmel_tsadcc_write(ATMEL_TSADCC_TRGR, ATMEL_TSADCC_TRGMOD_NONE);
+		atmel_tsadcc_write(ATMEL_TSADCC_IDR,
+				   ATMEL_TSADCC_EOC(3) | ATMEL_TSADCC_NOCNT);
+		atmel_tsadcc_write(ATMEL_TSADCC_IER, ATMEL_TSADCC_PENCNT);
+
+		input_report_key(input_dev, BTN_TOUCH, 0);
+		input_sync(input_dev);
+
+	} else if (status & ATMEL_TSADCC_PENCNT) {
+		/* Pen detected */
+		reg = atmel_tsadcc_read(ATMEL_TSADCC_MR);
+		reg &= ~ATMEL_TSADCC_PENDBC;
+
+		atmel_tsadcc_write(ATMEL_TSADCC_IDR, ATMEL_TSADCC_PENCNT);
+		atmel_tsadcc_write(ATMEL_TSADCC_MR, reg);
+		atmel_tsadcc_write(ATMEL_TSADCC_IER,
+				   ATMEL_TSADCC_EOC(3) | ATMEL_TSADCC_NOCNT);
+		atmel_tsadcc_write(ATMEL_TSADCC_TRGR,
+				   ATMEL_TSADCC_TRGMOD_PERIOD | (0x0FFF << 16));
+
+	} else if (status & ATMEL_TSADCC_EOC(3)) {
+		/* Conversion finished */
+
+		absx = atmel_tsadcc_read(ATMEL_TSADCC_CDR3) << 10;
+		absx /= atmel_tsadcc_read(ATMEL_TSADCC_CDR2);
+
+		absy = atmel_tsadcc_read(ATMEL_TSADCC_CDR1) << 10;
+		absy /= atmel_tsadcc_read(ATMEL_TSADCC_CDR0);
+
+		input_report_abs(input_dev, ABS_X, absx);
+		input_report_abs(input_dev, ABS_Y, absy);
+		input_report_key(input_dev, BTN_TOUCH, 1);
+		input_sync(input_dev);
+	}
+
+	return IRQ_HANDLED;
+}
+
+/*
+ * The functions for inserting/removing us as a module.
+ */
+
+static int __devinit atmel_tsadcc_probe(struct platform_device *pdev)
+{
+	struct atmel_tsadcc	*ts_dev;
+	struct input_dev	*input_dev;
+	struct resource		*res;
+	int		err = 0;
+	unsigned int	prsc;
+	unsigned int	reg;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!res) {
+		dev_err(&pdev->dev, "no mmio resource defined.\n");
+		return -ENXIO;
+	}
+
+	/* Allocate memory for device */
+	ts_dev = kzalloc(sizeof(struct atmel_tsadcc), GFP_KERNEL);
+	if (!ts_dev) {
+		dev_err(&pdev->dev, "failed to allocate memory.\n");
+		return -ENOMEM;
+	}
+	platform_set_drvdata(pdev, ts_dev);
+
+	input_dev = input_allocate_device();
+	if (!input_dev) {
+		dev_err(&pdev->dev, "failed to allocate input device.\n");
+		err = -EBUSY;
+		goto err_free_mem;
+	}
+
+	ts_dev->irq = platform_get_irq(pdev, 0);
+	if (ts_dev->irq < 0) {
+		dev_err(&pdev->dev, "no irq ID is designated.\n");
+		err = -ENODEV;
+		goto err_free_dev;
+	}
+
+	if (!request_mem_region(res->start, res->end - res->start + 1,
+				"atmel tsadcc regs")) {
+		dev_err(&pdev->dev, "resources is unavailable.\n");
+		err = -EBUSY;
+		goto err_free_dev;
+	}
+
+	tsc_base = ioremap(res->start, res->end - res->start + 1);
+	if (!tsc_base) {
+		dev_err(&pdev->dev, "failed to map registers.\n");
+		err = -ENOMEM;
+		goto err_release_mem;
+	}
+
+	err = request_irq(ts_dev->irq, atmel_tsadcc_interrupt, IRQF_DISABLED,
+			pdev->dev.driver->name, ts_dev);
+	if (err) {
+		dev_err(&pdev->dev, "failed to allocate irq.\n");
+		goto err_unmap_regs;
+	}
+
+	ts_dev->clk = clk_get(&pdev->dev, "tsc_clk");
+	if (IS_ERR(ts_dev->clk)) {
+		dev_err(&pdev->dev, "failed to get ts_clk\n");
+		err = PTR_ERR(ts_dev->clk);
+		goto err_free_irq;
+	}
+
+	ts_dev->input = input_dev;
+
+	snprintf(ts_dev->phys, sizeof(ts_dev->phys),
+		 "%s/input0", pdev->dev.bus_id);
+
+	input_dev->name = "atmel touch screen controller";
+	input_dev->phys = ts_dev->phys;
+	input_dev->dev.parent = &pdev->dev;
+
+	input_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS);
+	input_dev->keybit[BIT_WORD(BTN_TOUCH)] = BIT_MASK(BTN_TOUCH);
+
+	input_set_abs_params(input_dev, ABS_X, 0, 0x3FF, 0, 0);
+	input_set_abs_params(input_dev, ABS_Y, 0, 0x3FF, 0, 0);
+
+	/* clk_enable() always returns 0, no need to check it */
+	clk_enable(ts_dev->clk);
+
+	prsc = clk_get_rate(ts_dev->clk);
+	dev_info(&pdev->dev, "Master clock is set at: %d Hz\n", prsc);
+
+	prsc = prsc / ADC_CLOCK / 2 - 1;
+
+	reg = ATMEL_TSADCC_TSAMOD_TS_ONLY_MODE		|
+		((0x00 << 5) & ATMEL_TSADCC_SLEEP)	|	/* Normal Mode */
+		((0x01 << 6) & ATMEL_TSADCC_PENDET)	|	/* Enable Pen Detect */
+		((prsc << 8) & ATMEL_TSADCC_PRESCAL)	|	/* PRESCAL */
+		((0x13 << 16) & ATMEL_TSADCC_STARTUP)	|	/* STARTUP */
+		((0x0F << 28) & ATMEL_TSADCC_PENDBC);		/* PENDBC */
+
+	atmel_tsadcc_write(ATMEL_TSADCC_CR, ATMEL_TSADCC_SWRST);
+	atmel_tsadcc_write(ATMEL_TSADCC_MR, reg);
+	atmel_tsadcc_write(ATMEL_TSADCC_TRGR, ATMEL_TSADCC_TRGMOD_NONE);
+	atmel_tsadcc_write(ATMEL_TSADCC_TSR, (0x3 << 24) & ATMEL_TSADCC_TSSHTIM);
+
+	atmel_tsadcc_read(ATMEL_TSADCC_SR);
+	atmel_tsadcc_write(ATMEL_TSADCC_IER, ATMEL_TSADCC_PENCNT);
+
+	/* All went ok, so register to the input system */
+	err = input_register_device(input_dev);
+	if (err)
+		goto err_fail;
+
+	return 0;
+
+err_fail:
+	clk_disable(ts_dev->clk);
+	clk_put(ts_dev->clk);
+err_free_irq:
+	free_irq(ts_dev->irq, ts_dev);
+err_unmap_regs:
+	iounmap(tsc_base);
+err_release_mem:
+	release_mem_region(res->start, res->end - res->start + 1);
+err_free_dev:
+	input_free_device(ts_dev->input);
+err_free_mem:
+	kfree(ts_dev);
+	return err;
+}
+
+static int __devexit atmel_tsadcc_remove(struct platform_device *pdev)
+{
+	struct atmel_tsadcc *ts_dev = dev_get_drvdata(&pdev->dev);
+	struct resource *res;
+
+	free_irq(ts_dev->irq, ts_dev);
+
+	input_unregister_device(ts_dev->input);
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	iounmap(tsc_base);
+	release_mem_region(res->start, res->end - res->start + 1);
+
+	clk_disable(ts_dev->clk);
+	clk_put(ts_dev->clk);
+
+	kfree(ts_dev);
+
+	return 0;
+}
+
+static struct platform_driver atmel_tsadcc_driver = {
+	.probe		= atmel_tsadcc_probe,
+	.remove		= __devexit_p(atmel_tsadcc_remove),
+	.driver		= {
+		.name	= "atmel_tsadcc",
+	},
+};
+
+static int __init atmel_tsadcc_init(void)
+{
+	return platform_driver_register(&atmel_tsadcc_driver);
+}
+
+static void __exit atmel_tsadcc_exit(void)
+{
+	platform_driver_unregister(&atmel_tsadcc_driver);
+}
+
+module_init(atmel_tsadcc_init);
+module_exit(atmel_tsadcc_exit);
+
+
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("Atmel TouchScreen Driver");
+MODULE_AUTHOR("Dan Liang <dan.liang@atmel.com>");
+
diff --git a/drivers/input/touchscreen/corgi_ts.c b/drivers/input/touchscreen/corgi_ts.c
index 4e9d8eece2e0..65202c9f63ff 100644
--- a/drivers/input/touchscreen/corgi_ts.c
+++ b/drivers/input/touchscreen/corgi_ts.c
@@ -19,10 +19,10 @@
 #include <linux/slab.h>
 #include <linux/irq.h>
 
-#include <asm/arch/sharpsl.h>
-#include <asm/arch/hardware.h>
-#include <asm/arch/pxa-regs.h>
-#include <asm/arch/pxa2xx-gpio.h>
+#include <mach/sharpsl.h>
+#include <mach/hardware.h>
+#include <mach/pxa-regs.h>
+#include <mach/pxa2xx-gpio.h>
 
 
 #define PWR_MODE_ACTIVE		0
@@ -195,7 +195,7 @@ static void ts_interrupt_main(struct corgi_ts *corgi_ts, int isTimer)
 {
 	if ((GPLR(IRQ_TO_GPIO(corgi_ts->irq_gpio)) & GPIO_bit(IRQ_TO_GPIO(corgi_ts->irq_gpio))) == 0) {
 		/* Disable Interrupt */
-		set_irq_type(corgi_ts->irq_gpio, IRQT_NOEDGE);
+		set_irq_type(corgi_ts->irq_gpio, IRQ_TYPE_NONE);
 		if (read_xydata(corgi_ts)) {
 			corgi_ts->pendown = 1;
 			new_data(corgi_ts);
@@ -214,7 +214,7 @@ static void ts_interrupt_main(struct corgi_ts *corgi_ts, int isTimer)
 		}
 
 		/* Enable Falling Edge */
-		set_irq_type(corgi_ts->irq_gpio, IRQT_FALLING);
+		set_irq_type(corgi_ts->irq_gpio, IRQ_TYPE_EDGE_FALLING);
 		corgi_ts->pendown = 0;
 	}
 }
@@ -258,7 +258,7 @@ static int corgits_resume(struct platform_device *dev)
 
 	corgi_ssp_ads7846_putget((4u << ADSCTRL_ADR_SH) | ADSCTRL_STS);
 	/* Enable Falling Edge */
-	set_irq_type(corgi_ts->irq_gpio, IRQT_FALLING);
+	set_irq_type(corgi_ts->irq_gpio, IRQ_TYPE_EDGE_FALLING);
 	corgi_ts->power_mode = PWR_MODE_ACTIVE;
 
 	return 0;
@@ -333,7 +333,7 @@ static int __init corgits_probe(struct platform_device *pdev)
 	corgi_ts->power_mode = PWR_MODE_ACTIVE;
 
 	/* Enable Falling Edge */
-	set_irq_type(corgi_ts->irq_gpio, IRQT_FALLING);
+	set_irq_type(corgi_ts->irq_gpio, IRQ_TYPE_EDGE_FALLING);
 
 	return 0;
 
diff --git a/drivers/input/touchscreen/h3600_ts_input.c b/drivers/input/touchscreen/h3600_ts_input.c
index 4f86081dc7fc..4d3139e2099d 100644
--- a/drivers/input/touchscreen/h3600_ts_input.c
+++ b/drivers/input/touchscreen/h3600_ts_input.c
@@ -39,8 +39,8 @@
 #include <linux/delay.h>
 
 /* SA1100 serial defines */
-#include <asm/arch/hardware.h>
-#include <asm/arch/irqs.h>
+#include <mach/hardware.h>
+#include <mach/irqs.h>
 
 #define DRIVER_DESC	"H3600 touchscreen driver"
 
diff --git a/drivers/input/touchscreen/jornada720_ts.c b/drivers/input/touchscreen/jornada720_ts.c
index 1aca108b1031..bf44f9d68342 100644
--- a/drivers/input/touchscreen/jornada720_ts.c
+++ b/drivers/input/touchscreen/jornada720_ts.c
@@ -19,8 +19,8 @@
 #include <linux/interrupt.h>
 #include <linux/module.h>
 
-#include <asm/hardware.h>
-#include <asm/arch/jornada720.h>
+#include <mach/hardware.h>
+#include <mach/jornada720.h>
 
 MODULE_AUTHOR("Kristoffer Ericson <kristoffer.ericson@gmail.com>");
 MODULE_DESCRIPTION("HP Jornada 710/720/728 touchscreen driver");
diff --git a/drivers/input/touchscreen/mainstone-wm97xx.c b/drivers/input/touchscreen/mainstone-wm97xx.c
index a79f029b91c0..37a555f37306 100644
--- a/drivers/input/touchscreen/mainstone-wm97xx.c
+++ b/drivers/input/touchscreen/mainstone-wm97xx.c
@@ -25,7 +25,6 @@
 
 #include <linux/module.h>
 #include <linux/moduleparam.h>
-#include <linux/version.h>
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/delay.h>
@@ -33,7 +32,7 @@
 #include <linux/interrupt.h>
 #include <linux/wm97xx.h>
 #include <linux/io.h>
-#include <asm/arch/pxa-regs.h>
+#include <mach/pxa-regs.h>
 
 #define VERSION		"0.13"
 
@@ -198,7 +197,7 @@ static int wm97xx_acc_startup(struct wm97xx *wm)
 		switch (wm->id) {
 		case WM9705_ID2:
 			wm->pen_irq = IRQ_GPIO(4);
-			set_irq_type(IRQ_GPIO(4), IRQT_BOTHEDGE);
+			set_irq_type(IRQ_GPIO(4), IRQ_TYPE_EDGE_BOTH);
 			break;
 		case WM9712_ID2:
 		case WM9713_ID2:
diff --git a/drivers/input/touchscreen/migor_ts.c b/drivers/input/touchscreen/migor_ts.c
index c1cd99d58981..504ca11749a1 100644
--- a/drivers/input/touchscreen/migor_ts.c
+++ b/drivers/input/touchscreen/migor_ts.c
@@ -173,7 +173,7 @@ static int migor_ts_probe(struct i2c_client *client,
 	input_set_abs_params(input, ABS_X, 95, 955, 0, 0);
 	input_set_abs_params(input, ABS_Y, 85, 935, 0, 0);
 
-	input->name = client->driver_name;
+	input->name = client->name;
 	input->id.bustype = BUS_I2C;
 	input->dev.parent = &client->dev;
 
@@ -192,7 +192,7 @@ static int migor_ts_probe(struct i2c_client *client,
 		goto err1;
 
 	error = request_irq(priv->irq, migor_ts_isr, IRQF_TRIGGER_LOW,
-			    client->driver_name, priv);
+			    client->name, priv);
 	if (error) {
 		dev_err(&client->dev, "Unable to request touchscreen IRQ.\n");
 		goto err2;
@@ -224,12 +224,19 @@ static int migor_ts_remove(struct i2c_client *client)
 	return 0;
 }
 
+static const struct i2c_device_id migor_ts_id[] = {
+	{ "migor_ts", 0 },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, migor_ts);
+
 static struct i2c_driver migor_ts_driver = {
 	.driver = {
 		.name = "migor_ts",
 	},
 	.probe = migor_ts_probe,
 	.remove = migor_ts_remove,
+	.id_table = migor_ts_id,
 };
 
 static int __init migor_ts_init(void)
diff --git a/drivers/input/touchscreen/wm9705.c b/drivers/input/touchscreen/wm9705.c
index 978e1a13ffc7..372efbc694ff 100644
--- a/drivers/input/touchscreen/wm9705.c
+++ b/drivers/input/touchscreen/wm9705.c
@@ -17,7 +17,6 @@
 
 #include <linux/module.h>
 #include <linux/moduleparam.h>
-#include <linux/version.h>
 #include <linux/kernel.h>
 #include <linux/input.h>
 #include <linux/delay.h>
diff --git a/drivers/input/touchscreen/wm9712.c b/drivers/input/touchscreen/wm9712.c
index 4c5d85a249ae..c8bb1e7335fc 100644
--- a/drivers/input/touchscreen/wm9712.c
+++ b/drivers/input/touchscreen/wm9712.c
@@ -17,7 +17,6 @@
 
 #include <linux/module.h>
 #include <linux/moduleparam.h>
-#include <linux/version.h>
 #include <linux/kernel.h>
 #include <linux/input.h>
 #include <linux/delay.h>
diff --git a/drivers/input/touchscreen/wm9713.c b/drivers/input/touchscreen/wm9713.c
index 838458792ea0..781ee83547e6 100644
--- a/drivers/input/touchscreen/wm9713.c
+++ b/drivers/input/touchscreen/wm9713.c
@@ -17,7 +17,6 @@
 
 #include <linux/module.h>
 #include <linux/moduleparam.h>
-#include <linux/version.h>
 #include <linux/kernel.h>
 #include <linux/input.h>
 #include <linux/delay.h>
diff --git a/drivers/input/touchscreen/wm97xx-core.c b/drivers/input/touchscreen/wm97xx-core.c
index cdc24ad314e0..d589ab0e3adc 100644
--- a/drivers/input/touchscreen/wm97xx-core.c
+++ b/drivers/input/touchscreen/wm97xx-core.c
@@ -37,7 +37,6 @@
 
 #include <linux/module.h>
 #include <linux/moduleparam.h>
-#include <linux/version.h>
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/delay.h>
diff --git a/drivers/isdn/Kconfig b/drivers/isdn/Kconfig
index 66f946aa30b3..3d113c6e4a70 100644
--- a/drivers/isdn/Kconfig
+++ b/drivers/isdn/Kconfig
@@ -3,7 +3,7 @@
 #
 
 menuconfig ISDN
-	tristate "ISDN support"
+	bool "ISDN support"
 	depends on NET
 	depends on !S390
 	---help---
@@ -21,6 +21,8 @@ menuconfig ISDN
 
 if ISDN
 
+source "drivers/isdn/mISDN/Kconfig"
+
 menuconfig ISDN_I4L
 	tristate "Old ISDN4Linux (deprecated)"
 	---help---
diff --git a/drivers/isdn/Makefile b/drivers/isdn/Makefile
index 988142c30a6d..f1f777570e8e 100644
--- a/drivers/isdn/Makefile
+++ b/drivers/isdn/Makefile
@@ -4,7 +4,8 @@
 
 obj-$(CONFIG_ISDN_I4L)			+= i4l/
 obj-$(CONFIG_ISDN_CAPI)			+= capi/
-obj-$(CONFIG_ISDN_CAPI)			+= hardware/
+obj-$(CONFIG_MISDN)			+= mISDN/
+obj-$(CONFIG_ISDN)			+= hardware/
 obj-$(CONFIG_ISDN_DIVERSION)		+= divert/
 obj-$(CONFIG_ISDN_DRV_HISAX)		+= hisax/
 obj-$(CONFIG_ISDN_DRV_ICN)		+= icn/
diff --git a/drivers/isdn/gigaset/isocdata.c b/drivers/isdn/gigaset/isocdata.c
index e30a7773f93c..fbce5222d83c 100644
--- a/drivers/isdn/gigaset/isocdata.c
+++ b/drivers/isdn/gigaset/isocdata.c
@@ -247,7 +247,6 @@ static inline void dump_bytes(enum debuglevel level, const char *tag,
 #ifdef CONFIG_GIGASET_DEBUG
 	unsigned char c;
 	static char dbgline[3 * 32 + 1];
-	static const char hexdigit[] = "0123456789abcdef";
 	int i = 0;
 	while (count-- > 0) {
 		if (i > sizeof(dbgline) - 4) {
@@ -258,8 +257,8 @@ static inline void dump_bytes(enum debuglevel level, const char *tag,
 		c = *bytes++;
 		dbgline[i] = (i && !(i % 12)) ? '-' : ' ';
 		i++;
-		dbgline[i++] = hexdigit[(c >> 4) & 0x0f];
-		dbgline[i++] = hexdigit[c & 0x0f];
+		dbgline[i++] = hex_asc_hi(c);
+		dbgline[i++] = hex_asc_lo(c);
 	}
 	dbgline[i] = '\0';
 	gig_dbg(level, "%s:%s", tag, dbgline);
diff --git a/drivers/isdn/hardware/Makefile b/drivers/isdn/hardware/Makefile
index 11c8a183948c..a5d8fce4c4c4 100644
--- a/drivers/isdn/hardware/Makefile
+++ b/drivers/isdn/hardware/Makefile
@@ -4,3 +4,4 @@
 
 obj-$(CONFIG_CAPI_AVM)		+= avm/
 obj-$(CONFIG_CAPI_EICON)	+= eicon/
+obj-$(CONFIG_MISDN)		+= mISDN/
diff --git a/drivers/isdn/hardware/mISDN/Kconfig b/drivers/isdn/hardware/mISDN/Kconfig
new file mode 100644
index 000000000000..14793480c453
--- /dev/null
+++ b/drivers/isdn/hardware/mISDN/Kconfig
@@ -0,0 +1,25 @@
+#
+# Hardware for mISDN
+#
+comment "mISDN hardware drivers"
+
+config MISDN_HFCPCI
+	tristate "Support for HFC PCI cards"
+	depends on MISDN
+	depends on PCI
+	help
+	  Enable support for cards with Cologne Chip AG's
+          HFC PCI chip.
+
+config MISDN_HFCMULTI
+	tristate "Support for HFC multiport cards (HFC-4S/8S/E1)"
+	depends on PCI
+	depends on MISDN
+	help
+	  Enable support for cards with Cologne Chip AG's HFC multiport
+	  chip. There are three types of chips that are quite similar,
+	  but the interface is different:
+	   * HFC-4S (4 S/T interfaces on one chip)
+	   * HFC-8S (8 S/T interfaces on one chip)
+	   * HFC-E1 (E1 interface for 2Mbit ISDN)
+
diff --git a/drivers/isdn/hardware/mISDN/Makefile b/drivers/isdn/hardware/mISDN/Makefile
new file mode 100644
index 000000000000..1e7ca5332ad7
--- /dev/null
+++ b/drivers/isdn/hardware/mISDN/Makefile
@@ -0,0 +1,7 @@
+#
+# Makefile for the modular ISDN hardware drivers
+#
+#
+
+obj-$(CONFIG_MISDN_HFCPCI) += hfcpci.o
+obj-$(CONFIG_MISDN_HFCMULTI) += hfcmulti.o
diff --git a/drivers/isdn/hardware/mISDN/hfc_multi.h b/drivers/isdn/hardware/mISDN/hfc_multi.h
new file mode 100644
index 000000000000..a33d87afc843
--- /dev/null
+++ b/drivers/isdn/hardware/mISDN/hfc_multi.h
@@ -0,0 +1,1204 @@
+/*
+ * see notice in hfc_multi.c
+ */
+
+extern void ztdummy_extern_interrupt(void);
+extern void ztdummy_register_interrupt(void);
+extern int ztdummy_unregister_interrupt(void);
+
+#define DEBUG_HFCMULTI_FIFO	0x00010000
+#define	DEBUG_HFCMULTI_CRC	0x00020000
+#define	DEBUG_HFCMULTI_INIT	0x00040000
+#define	DEBUG_HFCMULTI_PLXSD	0x00080000
+#define	DEBUG_HFCMULTI_MODE	0x00100000
+#define	DEBUG_HFCMULTI_MSG	0x00200000
+#define	DEBUG_HFCMULTI_STATE	0x00400000
+#define	DEBUG_HFCMULTI_SYNC	0x01000000
+#define	DEBUG_HFCMULTI_DTMF	0x02000000
+#define	DEBUG_HFCMULTI_LOCK	0x80000000
+
+#define	PCI_ENA_REGIO	0x01
+#define	PCI_ENA_MEMIO	0x02
+
+/*
+ * NOTE: some registers are assigned multiple times due to different modes
+ *       also registers are assigned differen for HFC-4s/8s and HFC-E1
+ */
+
+/*
+#define MAX_FRAME_SIZE	2048
+*/
+
+struct hfc_chan {
+	struct dchannel	*dch;	/* link if channel is a D-channel */
+	struct bchannel	*bch;	/* link if channel is a B-channel */
+	int		port; 	/* the interface port this */
+				/* channel is associated with */
+	int		nt_timer; /* -1 if off, 0 if elapsed, >0 if running */
+	int		los, ais, slip_tx, slip_rx, rdi; /* current alarms */
+	int		jitter;
+	u_long		cfg;	/* port configuration */
+	int		sync;	/* sync state (used by E1) */
+	u_int		protocol; /* current protocol */
+	int		slot_tx; /* current pcm slot */
+	int		bank_tx; /* current pcm bank */
+	int		slot_rx;
+	int		bank_rx;
+	int		conf;	/* conference setting of TX slot */
+	int		txpending;	/* if there is currently data in */
+					/* the FIFO 0=no, 1=yes, 2=splloop */
+	int		rx_off; /* set to turn fifo receive off */
+	int		coeff_count; /* curren coeff block */
+	s32		*coeff; /* memory pointer to 8 coeff blocks */
+};
+
+
+struct hfcm_hw {
+	u_char	r_ctrl;
+	u_char	r_irq_ctrl;
+	u_char	r_cirm;
+	u_char	r_ram_sz;
+	u_char	r_pcm_md0;
+	u_char	r_irqmsk_misc;
+	u_char	r_dtmf;
+	u_char	r_st_sync;
+	u_char	r_sci_msk;
+	u_char	r_tx0, r_tx1;
+	u_char	a_st_ctrl0[8];
+	timer_t	timer;
+};
+
+
+/* for each stack these flags are used (cfg) */
+#define	HFC_CFG_NONCAP_TX	1 /* S/T TX interface has less capacity */
+#define	HFC_CFG_DIS_ECHANNEL	2 /* disable E-channel processing */
+#define	HFC_CFG_REG_ECHANNEL	3 /* register E-channel */
+#define	HFC_CFG_OPTICAL		4 /* the E1 interface is optical */
+#define	HFC_CFG_REPORT_LOS	5 /* the card should report loss of signal */
+#define	HFC_CFG_REPORT_AIS	6 /* the card should report alarm ind. sign. */
+#define	HFC_CFG_REPORT_SLIP	7 /* the card should report bit slips */
+#define	HFC_CFG_REPORT_RDI	8 /* the card should report remote alarm */
+#define	HFC_CFG_DTMF		9 /* enable DTMF-detection */
+#define	HFC_CFG_CRC4		10 /* disable CRC-4 Multiframe mode, */
+					/* use double frame instead. */
+
+#define	HFC_CHIP_EXRAM_128	0 /* external ram 128k */
+#define	HFC_CHIP_EXRAM_512	1 /* external ram 256k */
+#define	HFC_CHIP_REVISION0	2 /* old fifo handling */
+#define	HFC_CHIP_PCM_SLAVE	3 /* PCM is slave */
+#define	HFC_CHIP_PCM_MASTER	4 /* PCM is master */
+#define	HFC_CHIP_RX_SYNC	5 /* disable pll sync for pcm */
+#define	HFC_CHIP_DTMF		6 /* DTMF decoding is enabled */
+#define	HFC_CHIP_ULAW		7 /* ULAW mode */
+#define	HFC_CHIP_CLOCK2		8 /* double clock mode */
+#define	HFC_CHIP_E1CLOCK_GET	9 /* always get clock from E1 interface */
+#define	HFC_CHIP_E1CLOCK_PUT	10 /* always put clock from E1 interface */
+#define	HFC_CHIP_WATCHDOG	11 /* whether we should send signals */
+					/* to the watchdog */
+#define	HFC_CHIP_B410P		12 /* whether we have a b410p with echocan in */
+					/* hw */
+#define	HFC_CHIP_PLXSD		13 /* whether we have a Speech-Design PLX */
+
+#define HFC_IO_MODE_PCIMEM	0x00 /* normal memory mapped IO */
+#define HFC_IO_MODE_REGIO	0x01 /* PCI io access */
+#define HFC_IO_MODE_PLXSD	0x02 /* access HFC via PLX9030 */
+
+/* table entry in the PCI devices list */
+struct hm_map {
+	char *vendor_name;
+	char *card_name;
+	int type;
+	int ports;
+	int clock2;
+	int leds;
+	int opticalsupport;
+	int dip_type;
+	int io_mode;
+};
+
+struct hfc_multi {
+	struct list_head	list;
+	struct hm_map	*mtyp;
+	int		id;
+	int		pcm;	/* id of pcm bus */
+	int		type;
+	int		ports;
+
+	u_int		irq;	/* irq used by card */
+	u_int		irqcnt;
+	struct pci_dev	*pci_dev;
+	int		io_mode; /* selects mode */
+#ifdef HFC_REGISTER_DEBUG
+	void		(*HFC_outb)(struct hfc_multi *hc, u_char reg,
+				u_char val, const char *function, int line);
+	void		(*HFC_outb_nodebug)(struct hfc_multi *hc, u_char reg,
+				u_char val, const char *function, int line);
+	u_char		(*HFC_inb)(struct hfc_multi *hc, u_char reg,
+				const char *function, int line);
+	u_char		(*HFC_inb_nodebug)(struct hfc_multi *hc, u_char reg,
+				const char *function, int line);
+	u_short		(*HFC_inw)(struct hfc_multi *hc, u_char reg,
+				const char *function, int line);
+	u_short		(*HFC_inw_nodebug)(struct hfc_multi *hc, u_char reg,
+				const char *function, int line);
+	void		(*HFC_wait)(struct hfc_multi *hc,
+				const char *function, int line);
+	void		(*HFC_wait_nodebug)(struct hfc_multi *hc,
+				const char *function, int line);
+#else
+	void		(*HFC_outb)(struct hfc_multi *hc, u_char reg,
+				u_char val);
+	void		(*HFC_outb_nodebug)(struct hfc_multi *hc, u_char reg,
+				u_char val);
+	u_char		(*HFC_inb)(struct hfc_multi *hc, u_char reg);
+	u_char		(*HFC_inb_nodebug)(struct hfc_multi *hc, u_char reg);
+	u_short		(*HFC_inw)(struct hfc_multi *hc, u_char reg);
+	u_short		(*HFC_inw_nodebug)(struct hfc_multi *hc, u_char reg);
+	void		(*HFC_wait)(struct hfc_multi *hc);
+	void		(*HFC_wait_nodebug)(struct hfc_multi *hc);
+#endif
+	void		(*read_fifo)(struct hfc_multi *hc, u_char *data,
+				int len);
+	void		(*write_fifo)(struct hfc_multi *hc, u_char *data,
+				int len);
+	u_long		pci_origmembase, plx_origmembase, dsp_origmembase;
+	u_char		*pci_membase; /* PCI memory (MUST BE BYTE POINTER) */
+	u_char		*plx_membase; /* PLX memory */
+	u_char		*dsp_membase; /* DSP on PLX */
+	u_long		pci_iobase; /* PCI IO */
+	struct hfcm_hw	hw;	/* remember data of write-only-registers */
+
+	u_long		chip;	/* chip configuration */
+	int		masterclk; /* port that provides master clock -1=off */
+	int		dtmf;	/* flag that dtmf is currently in process */
+	int		Flen;	/* F-buffer size */
+	int		Zlen;	/* Z-buffer size (must be int for calculation)*/
+	int		max_trans; /* maximum transparent fifo fill */
+	int		Zmin;	/* Z-buffer offset */
+	int		DTMFbase; /* base address of DTMF coefficients */
+
+	u_int		slots;	/* number of PCM slots */
+	u_int		leds;	/* type of leds */
+	u_int		ledcount; /* used to animate leds */
+	u_long		ledstate; /* save last state of leds */
+	int		opticalsupport; /* has the e1 board */
+					/* an optical Interface */
+	int		dslot;	/* channel # of d-channel (E1) default 16 */
+
+	u_long		wdcount; 	/* every 500 ms we need to */
+					/* send the watchdog a signal */
+	u_char		wdbyte; /* watchdog toggle byte */
+	u_int		activity[8]; 	/* if there is any action on this */
+					/* port (will be cleared after */
+					/* showing led-states) */
+	int		e1_state; /* keep track of last state */
+	int		e1_getclock; /* if sync is retrieved from interface */
+	int		syncronized; /* keep track of existing sync interface */
+	int		e1_resync; /* resync jobs */
+
+	spinlock_t	lock;	/* the lock */
+
+	/*
+	 * the channel index is counted from 0, regardless where the channel
+	 * is located on the hfc-channel.
+	 * the bch->channel is equvalent to the hfc-channel
+	 */
+	struct hfc_chan	chan[32];
+	u_char		created[8]; /* what port is created */
+	signed char	slot_owner[256]; /* owner channel of slot */
+};
+
+/* PLX GPIOs */
+#define	PLX_GPIO4_DIR_BIT	13
+#define	PLX_GPIO4_BIT		14
+#define	PLX_GPIO5_DIR_BIT	16
+#define	PLX_GPIO5_BIT		17
+#define	PLX_GPIO6_DIR_BIT	19
+#define	PLX_GPIO6_BIT		20
+#define	PLX_GPIO7_DIR_BIT	22
+#define	PLX_GPIO7_BIT		23
+#define PLX_GPIO8_DIR_BIT	25
+#define PLX_GPIO8_BIT		26
+
+#define	PLX_GPIO4		(1 << PLX_GPIO4_BIT)
+#define	PLX_GPIO5		(1 << PLX_GPIO5_BIT)
+#define	PLX_GPIO6		(1 << PLX_GPIO6_BIT)
+#define	PLX_GPIO7		(1 << PLX_GPIO7_BIT)
+#define PLX_GPIO8		(1 << PLX_GPIO8_BIT)
+
+#define	PLX_GPIO4_DIR		(1 << PLX_GPIO4_DIR_BIT)
+#define	PLX_GPIO5_DIR		(1 << PLX_GPIO5_DIR_BIT)
+#define	PLX_GPIO6_DIR		(1 << PLX_GPIO6_DIR_BIT)
+#define	PLX_GPIO7_DIR		(1 << PLX_GPIO7_DIR_BIT)
+#define PLX_GPIO8_DIR		(1 << PLX_GPIO8_DIR_BIT)
+
+#define	PLX_TERM_ON			PLX_GPIO7
+#define	PLX_SLAVE_EN_N		PLX_GPIO5
+#define	PLX_MASTER_EN		PLX_GPIO6
+#define	PLX_SYNC_O_EN		PLX_GPIO4
+#define PLX_DSP_RES_N		PLX_GPIO8
+/* GPIO4..8 Enable & Set to OUT, SLAVE_EN_N = 1 */
+#define PLX_GPIOC_INIT		(PLX_GPIO4_DIR | PLX_GPIO5_DIR | PLX_GPIO6_DIR \
+			| PLX_GPIO7_DIR | PLX_GPIO8_DIR | PLX_SLAVE_EN_N)
+
+/* PLX Interrupt Control/STATUS */
+#define PLX_INTCSR_LINTI1_ENABLE 0x01
+#define PLX_INTCSR_LINTI1_STATUS 0x04
+#define PLX_INTCSR_LINTI2_ENABLE 0x08
+#define PLX_INTCSR_LINTI2_STATUS 0x20
+#define PLX_INTCSR_PCIINT_ENABLE 0x40
+
+/* PLX Registers */
+#define PLX_INTCSR 0x4c
+#define PLX_CNTRL  0x50
+#define PLX_GPIOC  0x54
+
+
+/*
+ * REGISTER SETTING FOR HFC-4S/8S AND HFC-E1
+ */
+
+/* write only registers */
+#define R_CIRM			0x00
+#define R_CTRL			0x01
+#define R_BRG_PCM_CFG 		0x02
+#define R_RAM_ADDR0		0x08
+#define R_RAM_ADDR1		0x09
+#define R_RAM_ADDR2		0x0A
+#define R_FIRST_FIFO		0x0B
+#define R_RAM_SZ		0x0C
+#define R_FIFO_MD		0x0D
+#define R_INC_RES_FIFO		0x0E
+#define R_FSM_IDX		0x0F
+#define R_FIFO			0x0F
+#define R_SLOT			0x10
+#define R_IRQMSK_MISC		0x11
+#define R_SCI_MSK		0x12
+#define R_IRQ_CTRL		0x13
+#define R_PCM_MD0		0x14
+#define R_PCM_MD1		0x15
+#define R_PCM_MD2		0x15
+#define R_SH0H			0x15
+#define R_SH1H			0x15
+#define R_SH0L			0x15
+#define R_SH1L			0x15
+#define R_SL_SEL0		0x15
+#define R_SL_SEL1		0x15
+#define R_SL_SEL2		0x15
+#define R_SL_SEL3		0x15
+#define R_SL_SEL4		0x15
+#define R_SL_SEL5		0x15
+#define R_SL_SEL6		0x15
+#define R_SL_SEL7		0x15
+#define R_ST_SEL		0x16
+#define R_ST_SYNC		0x17
+#define R_CONF_EN		0x18
+#define R_TI_WD			0x1A
+#define R_BERT_WD_MD		0x1B
+#define R_DTMF			0x1C
+#define R_DTMF_N		0x1D
+#define R_E1_WR_STA		0x20
+#define R_E1_RD_STA		0x20
+#define R_LOS0			0x22
+#define R_LOS1			0x23
+#define R_RX0			0x24
+#define R_RX_FR0		0x25
+#define R_RX_FR1		0x26
+#define R_TX0			0x28
+#define R_TX1			0x29
+#define R_TX_FR0		0x2C
+
+#define R_TX_FR1		0x2D
+#define R_TX_FR2		0x2E
+#define R_JATT_ATT		0x2F /* undocumented */
+#define A_ST_RD_STATE		0x30
+#define A_ST_WR_STATE		0x30
+#define R_RX_OFF		0x30
+#define A_ST_CTRL0		0x31
+#define R_SYNC_OUT		0x31
+#define A_ST_CTRL1		0x32
+#define A_ST_CTRL2		0x33
+#define A_ST_SQ_WR		0x34
+#define R_TX_OFF		0x34
+#define R_SYNC_CTRL		0x35
+#define A_ST_CLK_DLY		0x37
+#define R_PWM0			0x38
+#define R_PWM1			0x39
+#define A_ST_B1_TX		0x3C
+#define A_ST_B2_TX		0x3D
+#define A_ST_D_TX		0x3E
+#define R_GPIO_OUT0		0x40
+#define R_GPIO_OUT1		0x41
+#define R_GPIO_EN0		0x42
+#define R_GPIO_EN1		0x43
+#define R_GPIO_SEL		0x44
+#define R_BRG_CTRL		0x45
+#define R_PWM_MD		0x46
+#define R_BRG_MD		0x47
+#define R_BRG_TIM0		0x48
+#define R_BRG_TIM1		0x49
+#define R_BRG_TIM2		0x4A
+#define R_BRG_TIM3		0x4B
+#define R_BRG_TIM_SEL01		0x4C
+#define R_BRG_TIM_SEL23		0x4D
+#define R_BRG_TIM_SEL45		0x4E
+#define R_BRG_TIM_SEL67		0x4F
+#define A_SL_CFG		0xD0
+#define A_CONF			0xD1
+#define A_CH_MSK		0xF4
+#define A_CON_HDLC		0xFA
+#define A_SUBCH_CFG		0xFB
+#define A_CHANNEL		0xFC
+#define A_FIFO_SEQ		0xFD
+#define A_IRQ_MSK		0xFF
+
+/* read only registers */
+#define A_Z12			0x04
+#define A_Z1L			0x04
+#define A_Z1			0x04
+#define A_Z1H			0x05
+#define A_Z2L			0x06
+#define A_Z2			0x06
+#define A_Z2H			0x07
+#define A_F1			0x0C
+#define A_F12			0x0C
+#define A_F2			0x0D
+#define R_IRQ_OVIEW		0x10
+#define R_IRQ_MISC		0x11
+#define R_IRQ_STATECH		0x12
+#define R_CONF_OFLOW		0x14
+#define R_RAM_USE		0x15
+#define R_CHIP_ID		0x16
+#define R_BERT_STA		0x17
+#define R_F0_CNTL		0x18
+#define R_F0_CNTH		0x19
+#define R_BERT_EC		0x1A
+#define R_BERT_ECL		0x1A
+#define R_BERT_ECH		0x1B
+#define R_STATUS		0x1C
+#define R_CHIP_RV		0x1F
+#define R_STATE			0x20
+#define R_SYNC_STA		0x24
+#define R_RX_SL0_0		0x25
+#define R_RX_SL0_1		0x26
+#define R_RX_SL0_2		0x27
+#define R_JATT_DIR		0x2b /* undocumented */
+#define R_SLIP			0x2c
+#define A_ST_RD_STA		0x30
+#define R_FAS_EC		0x30
+#define R_FAS_ECL		0x30
+#define R_FAS_ECH		0x31
+#define R_VIO_EC		0x32
+#define R_VIO_ECL		0x32
+#define R_VIO_ECH		0x33
+#define A_ST_SQ_RD		0x34
+#define R_CRC_EC		0x34
+#define R_CRC_ECL		0x34
+#define R_CRC_ECH		0x35
+#define R_E_EC			0x36
+#define R_E_ECL			0x36
+#define R_E_ECH			0x37
+#define R_SA6_SA13_EC		0x38
+#define R_SA6_SA13_ECL		0x38
+#define R_SA6_SA13_ECH		0x39
+#define R_SA6_SA23_EC		0x3A
+#define R_SA6_SA23_ECL		0x3A
+#define R_SA6_SA23_ECH		0x3B
+#define A_ST_B1_RX		0x3C
+#define A_ST_B2_RX		0x3D
+#define A_ST_D_RX		0x3E
+#define A_ST_E_RX		0x3F
+#define R_GPIO_IN0		0x40
+#define R_GPIO_IN1		0x41
+#define R_GPI_IN0		0x44
+#define R_GPI_IN1		0x45
+#define R_GPI_IN2		0x46
+#define R_GPI_IN3		0x47
+#define R_INT_DATA		0x88
+#define R_IRQ_FIFO_BL0		0xC8
+#define R_IRQ_FIFO_BL1		0xC9
+#define R_IRQ_FIFO_BL2		0xCA
+#define R_IRQ_FIFO_BL3		0xCB
+#define R_IRQ_FIFO_BL4		0xCC
+#define R_IRQ_FIFO_BL5		0xCD
+#define R_IRQ_FIFO_BL6		0xCE
+#define R_IRQ_FIFO_BL7		0xCF
+
+/* read and write registers */
+#define A_FIFO_DATA0		0x80
+#define A_FIFO_DATA1		0x80
+#define A_FIFO_DATA2		0x80
+#define A_FIFO_DATA0_NOINC	0x84
+#define A_FIFO_DATA1_NOINC	0x84
+#define A_FIFO_DATA2_NOINC	0x84
+#define R_RAM_DATA		0xC0
+
+
+/*
+ * BIT SETTING FOR HFC-4S/8S AND HFC-E1
+ */
+
+/* chapter 2: universal bus interface */
+/* R_CIRM */
+#define V_IRQ_SEL		0x01
+#define V_SRES			0x08
+#define V_HFCRES		0x10
+#define V_PCMRES		0x20
+#define V_STRES			0x40
+#define V_ETRES			0x40
+#define V_RLD_EPR		0x80
+/* R_CTRL */
+#define V_FIFO_LPRIO		0x02
+#define V_SLOW_RD		0x04
+#define V_EXT_RAM		0x08
+#define V_CLK_OFF		0x20
+#define V_ST_CLK		0x40
+/* R_RAM_ADDR0 */
+#define V_RAM_ADDR2		0x01
+#define V_ADDR_RES		0x40
+#define V_ADDR_INC		0x80
+/* R_RAM_SZ */
+#define V_RAM_SZ		0x01
+#define V_PWM0_16KHZ		0x10
+#define V_PWM1_16KHZ		0x20
+#define V_FZ_MD			0x80
+/* R_CHIP_ID */
+#define V_PNP_IRQ		0x01
+#define V_CHIP_ID		0x10
+
+/* chapter 3: data flow */
+/* R_FIRST_FIFO */
+#define V_FIRST_FIRO_DIR	0x01
+#define V_FIRST_FIFO_NUM	0x02
+/* R_FIFO_MD */
+#define V_FIFO_MD		0x01
+#define V_CSM_MD		0x04
+#define V_FSM_MD		0x08
+#define V_FIFO_SZ		0x10
+/* R_FIFO */
+#define V_FIFO_DIR		0x01
+#define V_FIFO_NUM		0x02
+#define V_REV			0x80
+/* R_SLOT */
+#define V_SL_DIR		0x01
+#define V_SL_NUM		0x02
+/* A_SL_CFG */
+#define V_CH_DIR		0x01
+#define V_CH_SEL		0x02
+#define V_ROUTING		0x40
+/* A_CON_HDLC */
+#define V_IFF			0x01
+#define V_HDLC_TRP		0x02
+#define V_TRP_IRQ		0x04
+#define V_DATA_FLOW		0x20
+/* A_SUBCH_CFG */
+#define V_BIT_CNT		0x01
+#define V_START_BIT		0x08
+#define V_LOOP_FIFO		0x40
+#define V_INV_DATA		0x80
+/* A_CHANNEL */
+#define V_CH_DIR0		0x01
+#define V_CH_NUM0		0x02
+/* A_FIFO_SEQ */
+#define V_NEXT_FIFO_DIR		0x01
+#define V_NEXT_FIFO_NUM		0x02
+#define V_SEQ_END		0x40
+
+/* chapter 4: FIFO handling and HDLC controller */
+/* R_INC_RES_FIFO */
+#define V_INC_F			0x01
+#define V_RES_F			0x02
+#define V_RES_LOST		0x04
+
+/* chapter 5: S/T interface */
+/* R_SCI_MSK */
+#define V_SCI_MSK_ST0		0x01
+#define V_SCI_MSK_ST1		0x02
+#define V_SCI_MSK_ST2		0x04
+#define V_SCI_MSK_ST3		0x08
+#define V_SCI_MSK_ST4		0x10
+#define V_SCI_MSK_ST5		0x20
+#define V_SCI_MSK_ST6		0x40
+#define V_SCI_MSK_ST7		0x80
+/* R_ST_SEL */
+#define V_ST_SEL		0x01
+#define V_MULT_ST		0x08
+/* R_ST_SYNC */
+#define V_SYNC_SEL		0x01
+#define V_AUTO_SYNC		0x08
+/* A_ST_WR_STA */
+#define V_ST_SET_STA		0x01
+#define V_ST_LD_STA		0x10
+#define V_ST_ACT		0x20
+#define V_SET_G2_G3		0x80
+/* A_ST_CTRL0 */
+#define V_B1_EN			0x01
+#define V_B2_EN			0x02
+#define V_ST_MD			0x04
+#define V_D_PRIO		0x08
+#define V_SQ_EN			0x10
+#define V_96KHZ			0x20
+#define V_TX_LI			0x40
+#define V_ST_STOP		0x80
+/* A_ST_CTRL1 */
+#define V_G2_G3_EN		0x01
+#define V_D_HI			0x04
+#define V_E_IGNO		0x08
+#define V_E_LO			0x10
+#define V_B12_SWAP		0x80
+/* A_ST_CTRL2 */
+#define V_B1_RX_EN		0x01
+#define V_B2_RX_EN		0x02
+#define V_ST_TRIS		0x40
+/* A_ST_CLK_DLY */
+#define V_ST_CK_DLY		0x01
+#define V_ST_SMPL		0x10
+/* A_ST_D_TX */
+#define V_ST_D_TX		0x40
+/* R_IRQ_STATECH */
+#define V_SCI_ST0		0x01
+#define V_SCI_ST1		0x02
+#define V_SCI_ST2		0x04
+#define V_SCI_ST3		0x08
+#define V_SCI_ST4		0x10
+#define V_SCI_ST5		0x20
+#define V_SCI_ST6		0x40
+#define V_SCI_ST7		0x80
+/* A_ST_RD_STA */
+#define V_ST_STA		0x01
+#define V_FR_SYNC_ST		0x10
+#define V_TI2_EXP		0x20
+#define V_INFO0			0x40
+#define V_G2_G3			0x80
+/* A_ST_SQ_RD */
+#define V_ST_SQ			0x01
+#define V_MF_RX_RDY		0x10
+#define V_MF_TX_RDY		0x80
+/* A_ST_D_RX */
+#define V_ST_D_RX		0x40
+/* A_ST_E_RX */
+#define V_ST_E_RX		0x40
+
+/* chapter 5: E1 interface */
+/* R_E1_WR_STA */
+/* R_E1_RD_STA */
+#define V_E1_SET_STA		0x01
+#define V_E1_LD_STA		0x10
+/* R_RX0 */
+#define V_RX_CODE		0x01
+#define V_RX_FBAUD		0x04
+#define V_RX_CMI		0x08
+#define V_RX_INV_CMI		0x10
+#define V_RX_INV_CLK		0x20
+#define V_RX_INV_DATA		0x40
+#define V_AIS_ITU		0x80
+/* R_RX_FR0 */
+#define V_NO_INSYNC		0x01
+#define V_AUTO_RESYNC		0x02
+#define V_AUTO_RECO		0x04
+#define V_SWORD_COND		0x08
+#define V_SYNC_LOSS		0x10
+#define V_XCRC_SYNC		0x20
+#define V_MF_RESYNC		0x40
+#define V_RESYNC		0x80
+/* R_RX_FR1 */
+#define V_RX_MF			0x01
+#define V_RX_MF_SYNC		0x02
+#define V_RX_SL0_RAM		0x04
+#define V_ERR_SIM		0x20
+#define V_RES_NMF		0x40
+/* R_TX0 */
+#define V_TX_CODE		0x01
+#define V_TX_FBAUD		0x04
+#define V_TX_CMI_CODE		0x08
+#define V_TX_INV_CMI_CODE	0x10
+#define V_TX_INV_CLK		0x20
+#define V_TX_INV_DATA		0x40
+#define V_OUT_EN		0x80
+/* R_TX1 */
+#define V_INV_CLK		0x01
+#define V_EXCHG_DATA_LI		0x02
+#define V_AIS_OUT		0x04
+#define V_ATX			0x20
+#define V_NTRI			0x40
+#define V_AUTO_ERR_RES		0x80
+/* R_TX_FR0 */
+#define V_TRP_FAS		0x01
+#define V_TRP_NFAS		0x02
+#define V_TRP_RAL		0x04
+#define V_TRP_SA		0x08
+/* R_TX_FR1 */
+#define V_TX_FAS		0x01
+#define V_TX_NFAS		0x02
+#define V_TX_RAL		0x04
+#define V_TX_SA			0x08
+/* R_TX_FR2 */
+#define V_TX_MF			0x01
+#define V_TRP_SL0		0x02
+#define V_TX_SL0_RAM		0x04
+#define V_TX_E			0x10
+#define V_NEG_E			0x20
+#define V_XS12_ON		0x40
+#define V_XS15_ON		0x80
+/* R_RX_OFF */
+#define V_RX_SZ			0x01
+#define V_RX_INIT		0x04
+/* R_SYNC_OUT */
+#define V_SYNC_E1_RX		0x01
+#define V_IPATS0		0x20
+#define V_IPATS1		0x40
+#define V_IPATS2		0x80
+/* R_TX_OFF */
+#define V_TX_SZ			0x01
+#define V_TX_INIT		0x04
+/* R_SYNC_CTRL */
+#define V_EXT_CLK_SYNC		0x01
+#define V_SYNC_OFFS		0x02
+#define V_PCM_SYNC		0x04
+#define V_NEG_CLK		0x08
+#define V_HCLK			0x10
+/*
+#define V_JATT_AUTO_DEL		0x20
+#define V_JATT_AUTO		0x40
+*/
+#define V_JATT_OFF		0x80
+/* R_STATE */
+#define V_E1_STA		0x01
+#define V_ALT_FR_RX		0x40
+#define V_ALT_FR_TX		0x80
+/* R_SYNC_STA */
+#define V_RX_STA		0x01
+#define V_FR_SYNC_E1		0x04
+#define V_SIG_LOS		0x08
+#define V_MFA_STA		0x10
+#define V_AIS			0x40
+#define V_NO_MF_SYNC		0x80
+/* R_RX_SL0_0 */
+#define V_SI_FAS		0x01
+#define V_SI_NFAS		0x02
+#define V_A			0x04
+#define V_CRC_OK		0x08
+#define V_TX_E1			0x10
+#define V_TX_E2			0x20
+#define V_RX_E1			0x40
+#define V_RX_E2			0x80
+/* R_SLIP */
+#define V_SLIP_RX		0x01
+#define V_FOSLIP_RX		0x08
+#define V_SLIP_TX		0x10
+#define V_FOSLIP_TX		0x80
+
+/* chapter 6: PCM interface */
+/* R_PCM_MD0 */
+#define V_PCM_MD		0x01
+#define V_C4_POL		0x02
+#define V_F0_NEG		0x04
+#define V_F0_LEN		0x08
+#define V_PCM_ADDR		0x10
+/* R_SL_SEL0 */
+#define V_SL_SEL0		0x01
+#define V_SH_SEL0		0x80
+/* R_SL_SEL1 */
+#define V_SL_SEL1		0x01
+#define V_SH_SEL1		0x80
+/* R_SL_SEL2 */
+#define V_SL_SEL2		0x01
+#define V_SH_SEL2		0x80
+/* R_SL_SEL3 */
+#define V_SL_SEL3		0x01
+#define V_SH_SEL3		0x80
+/* R_SL_SEL4 */
+#define V_SL_SEL4		0x01
+#define V_SH_SEL4		0x80
+/* R_SL_SEL5 */
+#define V_SL_SEL5		0x01
+#define V_SH_SEL5		0x80
+/* R_SL_SEL6 */
+#define V_SL_SEL6		0x01
+#define V_SH_SEL6		0x80
+/* R_SL_SEL7 */
+#define V_SL_SEL7		0x01
+#define V_SH_SEL7		0x80
+/* R_PCM_MD1 */
+#define V_ODEC_CON		0x01
+#define V_PLL_ADJ		0x04
+#define V_PCM_DR		0x10
+#define V_PCM_LOOP		0x40
+/* R_PCM_MD2 */
+#define V_SYNC_PLL		0x02
+#define V_SYNC_SRC		0x04
+#define V_SYNC_OUT		0x08
+#define V_ICR_FR_TIME		0x40
+#define V_EN_PLL		0x80
+
+/* chapter 7: pulse width modulation */
+/* R_PWM_MD */
+#define V_EXT_IRQ_EN		0x08
+#define V_PWM0_MD		0x10
+#define V_PWM1_MD		0x40
+
+/* chapter 8: multiparty audio conferences */
+/* R_CONF_EN */
+#define V_CONF_EN		0x01
+#define V_ULAW			0x80
+/* A_CONF */
+#define V_CONF_NUM		0x01
+#define V_NOISE_SUPPR		0x08
+#define V_ATT_LEV		0x20
+#define V_CONF_SL		0x80
+/* R_CONF_OFLOW */
+#define V_CONF_OFLOW0		0x01
+#define V_CONF_OFLOW1		0x02
+#define V_CONF_OFLOW2		0x04
+#define V_CONF_OFLOW3		0x08
+#define V_CONF_OFLOW4		0x10
+#define V_CONF_OFLOW5		0x20
+#define V_CONF_OFLOW6		0x40
+#define V_CONF_OFLOW7		0x80
+
+/* chapter 9: DTMF contoller */
+/* R_DTMF0 */
+#define V_DTMF_EN		0x01
+#define V_HARM_SEL		0x02
+#define V_DTMF_RX_CH		0x04
+#define V_DTMF_STOP		0x08
+#define V_CHBL_SEL		0x10
+#define V_RST_DTMF		0x40
+#define V_ULAW_SEL		0x80
+
+/* chapter 10: BERT */
+/* R_BERT_WD_MD */
+#define V_PAT_SEQ		0x01
+#define V_BERT_ERR		0x08
+#define V_AUTO_WD_RES		0x20
+#define V_WD_RES		0x80
+/* R_BERT_STA */
+#define V_BERT_SYNC_SRC		0x01
+#define V_BERT_SYNC		0x10
+#define V_BERT_INV_DATA		0x20
+
+/* chapter 11: auxiliary interface */
+/* R_BRG_PCM_CFG */
+#define V_BRG_EN		0x01
+#define V_BRG_MD		0x02
+#define V_PCM_CLK		0x20
+#define V_ADDR_WRDLY		0x40
+/* R_BRG_CTRL */
+#define V_BRG_CS		0x01
+#define V_BRG_ADDR		0x08
+#define V_BRG_CS_SRC		0x80
+/* R_BRG_MD */
+#define V_BRG_MD0		0x01
+#define V_BRG_MD1		0x02
+#define V_BRG_MD2		0x04
+#define V_BRG_MD3		0x08
+#define V_BRG_MD4		0x10
+#define V_BRG_MD5		0x20
+#define V_BRG_MD6		0x40
+#define V_BRG_MD7		0x80
+/* R_BRG_TIM0 */
+#define V_BRG_TIM0_IDLE		0x01
+#define V_BRG_TIM0_CLK		0x10
+/* R_BRG_TIM1 */
+#define V_BRG_TIM1_IDLE		0x01
+#define V_BRG_TIM1_CLK		0x10
+/* R_BRG_TIM2 */
+#define V_BRG_TIM2_IDLE		0x01
+#define V_BRG_TIM2_CLK		0x10
+/* R_BRG_TIM3 */
+#define V_BRG_TIM3_IDLE		0x01
+#define V_BRG_TIM3_CLK		0x10
+/* R_BRG_TIM_SEL01 */
+#define V_BRG_WR_SEL0		0x01
+#define V_BRG_RD_SEL0		0x04
+#define V_BRG_WR_SEL1		0x10
+#define V_BRG_RD_SEL1		0x40
+/* R_BRG_TIM_SEL23 */
+#define V_BRG_WR_SEL2		0x01
+#define V_BRG_RD_SEL2		0x04
+#define V_BRG_WR_SEL3		0x10
+#define V_BRG_RD_SEL3		0x40
+/* R_BRG_TIM_SEL45 */
+#define V_BRG_WR_SEL4		0x01
+#define V_BRG_RD_SEL4		0x04
+#define V_BRG_WR_SEL5		0x10
+#define V_BRG_RD_SEL5		0x40
+/* R_BRG_TIM_SEL67 */
+#define V_BRG_WR_SEL6		0x01
+#define V_BRG_RD_SEL6		0x04
+#define V_BRG_WR_SEL7		0x10
+#define V_BRG_RD_SEL7		0x40
+
+/* chapter 12: clock, reset, interrupt, timer and watchdog */
+/* R_IRQMSK_MISC */
+#define V_STA_IRQMSK		0x01
+#define V_TI_IRQMSK		0x02
+#define V_PROC_IRQMSK		0x04
+#define V_DTMF_IRQMSK		0x08
+#define V_IRQ1S_MSK		0x10
+#define V_SA6_IRQMSK		0x20
+#define V_RX_EOMF_MSK		0x40
+#define V_TX_EOMF_MSK		0x80
+/* R_IRQ_CTRL */
+#define V_FIFO_IRQ		0x01
+#define V_GLOB_IRQ_EN		0x08
+#define V_IRQ_POL		0x10
+/* R_TI_WD */
+#define V_EV_TS			0x01
+#define V_WD_TS			0x10
+/* A_IRQ_MSK */
+#define V_IRQ			0x01
+#define V_BERT_EN		0x02
+#define V_MIX_IRQ		0x04
+/* R_IRQ_OVIEW */
+#define V_IRQ_FIFO_BL0		0x01
+#define V_IRQ_FIFO_BL1		0x02
+#define V_IRQ_FIFO_BL2		0x04
+#define V_IRQ_FIFO_BL3		0x08
+#define V_IRQ_FIFO_BL4		0x10
+#define V_IRQ_FIFO_BL5		0x20
+#define V_IRQ_FIFO_BL6		0x40
+#define V_IRQ_FIFO_BL7		0x80
+/* R_IRQ_MISC */
+#define V_STA_IRQ		0x01
+#define V_TI_IRQ		0x02
+#define V_IRQ_PROC		0x04
+#define V_DTMF_IRQ		0x08
+#define V_IRQ1S			0x10
+#define V_SA6_IRQ		0x20
+#define V_RX_EOMF		0x40
+#define V_TX_EOMF		0x80
+/* R_STATUS */
+#define V_BUSY			0x01
+#define V_PROC			0x02
+#define V_DTMF_STA		0x04
+#define V_LOST_STA		0x08
+#define V_SYNC_IN		0x10
+#define V_EXT_IRQSTA		0x20
+#define V_MISC_IRQSTA		0x40
+#define V_FR_IRQSTA		0x80
+/* R_IRQ_FIFO_BL0 */
+#define V_IRQ_FIFO0_TX		0x01
+#define V_IRQ_FIFO0_RX		0x02
+#define V_IRQ_FIFO1_TX		0x04
+#define V_IRQ_FIFO1_RX		0x08
+#define V_IRQ_FIFO2_TX		0x10
+#define V_IRQ_FIFO2_RX		0x20
+#define V_IRQ_FIFO3_TX		0x40
+#define V_IRQ_FIFO3_RX		0x80
+/* R_IRQ_FIFO_BL1 */
+#define V_IRQ_FIFO4_TX		0x01
+#define V_IRQ_FIFO4_RX		0x02
+#define V_IRQ_FIFO5_TX		0x04
+#define V_IRQ_FIFO5_RX		0x08
+#define V_IRQ_FIFO6_TX		0x10
+#define V_IRQ_FIFO6_RX		0x20
+#define V_IRQ_FIFO7_TX		0x40
+#define V_IRQ_FIFO7_RX		0x80
+/* R_IRQ_FIFO_BL2 */
+#define V_IRQ_FIFO8_TX		0x01
+#define V_IRQ_FIFO8_RX		0x02
+#define V_IRQ_FIFO9_TX		0x04
+#define V_IRQ_FIFO9_RX		0x08
+#define V_IRQ_FIFO10_TX		0x10
+#define V_IRQ_FIFO10_RX		0x20
+#define V_IRQ_FIFO11_TX		0x40
+#define V_IRQ_FIFO11_RX		0x80
+/* R_IRQ_FIFO_BL3 */
+#define V_IRQ_FIFO12_TX		0x01
+#define V_IRQ_FIFO12_RX		0x02
+#define V_IRQ_FIFO13_TX		0x04
+#define V_IRQ_FIFO13_RX		0x08
+#define V_IRQ_FIFO14_TX		0x10
+#define V_IRQ_FIFO14_RX		0x20
+#define V_IRQ_FIFO15_TX		0x40
+#define V_IRQ_FIFO15_RX		0x80
+/* R_IRQ_FIFO_BL4 */
+#define V_IRQ_FIFO16_TX		0x01
+#define V_IRQ_FIFO16_RX		0x02
+#define V_IRQ_FIFO17_TX		0x04
+#define V_IRQ_FIFO17_RX		0x08
+#define V_IRQ_FIFO18_TX		0x10
+#define V_IRQ_FIFO18_RX		0x20
+#define V_IRQ_FIFO19_TX		0x40
+#define V_IRQ_FIFO19_RX		0x80
+/* R_IRQ_FIFO_BL5 */
+#define V_IRQ_FIFO20_TX		0x01
+#define V_IRQ_FIFO20_RX		0x02
+#define V_IRQ_FIFO21_TX		0x04
+#define V_IRQ_FIFO21_RX		0x08
+#define V_IRQ_FIFO22_TX		0x10
+#define V_IRQ_FIFO22_RX		0x20
+#define V_IRQ_FIFO23_TX		0x40
+#define V_IRQ_FIFO23_RX		0x80
+/* R_IRQ_FIFO_BL6 */
+#define V_IRQ_FIFO24_TX		0x01
+#define V_IRQ_FIFO24_RX		0x02
+#define V_IRQ_FIFO25_TX		0x04
+#define V_IRQ_FIFO25_RX		0x08
+#define V_IRQ_FIFO26_TX		0x10
+#define V_IRQ_FIFO26_RX		0x20
+#define V_IRQ_FIFO27_TX		0x40
+#define V_IRQ_FIFO27_RX		0x80
+/* R_IRQ_FIFO_BL7 */
+#define V_IRQ_FIFO28_TX		0x01
+#define V_IRQ_FIFO28_RX		0x02
+#define V_IRQ_FIFO29_TX		0x04
+#define V_IRQ_FIFO29_RX		0x08
+#define V_IRQ_FIFO30_TX		0x10
+#define V_IRQ_FIFO30_RX		0x20
+#define V_IRQ_FIFO31_TX		0x40
+#define V_IRQ_FIFO31_RX		0x80
+
+/* chapter 13: general purpose I/O pins (GPIO) and input pins (GPI) */
+/* R_GPIO_OUT0 */
+#define V_GPIO_OUT0		0x01
+#define V_GPIO_OUT1		0x02
+#define V_GPIO_OUT2		0x04
+#define V_GPIO_OUT3		0x08
+#define V_GPIO_OUT4		0x10
+#define V_GPIO_OUT5		0x20
+#define V_GPIO_OUT6		0x40
+#define V_GPIO_OUT7		0x80
+/* R_GPIO_OUT1 */
+#define V_GPIO_OUT8		0x01
+#define V_GPIO_OUT9		0x02
+#define V_GPIO_OUT10		0x04
+#define V_GPIO_OUT11		0x08
+#define V_GPIO_OUT12		0x10
+#define V_GPIO_OUT13		0x20
+#define V_GPIO_OUT14		0x40
+#define V_GPIO_OUT15		0x80
+/* R_GPIO_EN0 */
+#define V_GPIO_EN0		0x01
+#define V_GPIO_EN1		0x02
+#define V_GPIO_EN2		0x04
+#define V_GPIO_EN3		0x08
+#define V_GPIO_EN4		0x10
+#define V_GPIO_EN5		0x20
+#define V_GPIO_EN6		0x40
+#define V_GPIO_EN7		0x80
+/* R_GPIO_EN1 */
+#define V_GPIO_EN8		0x01
+#define V_GPIO_EN9		0x02
+#define V_GPIO_EN10		0x04
+#define V_GPIO_EN11		0x08
+#define V_GPIO_EN12		0x10
+#define V_GPIO_EN13		0x20
+#define V_GPIO_EN14		0x40
+#define V_GPIO_EN15		0x80
+/* R_GPIO_SEL */
+#define V_GPIO_SEL0		0x01
+#define V_GPIO_SEL1		0x02
+#define V_GPIO_SEL2		0x04
+#define V_GPIO_SEL3		0x08
+#define V_GPIO_SEL4		0x10
+#define V_GPIO_SEL5		0x20
+#define V_GPIO_SEL6		0x40
+#define V_GPIO_SEL7		0x80
+/* R_GPIO_IN0 */
+#define V_GPIO_IN0		0x01
+#define V_GPIO_IN1		0x02
+#define V_GPIO_IN2		0x04
+#define V_GPIO_IN3		0x08
+#define V_GPIO_IN4		0x10
+#define V_GPIO_IN5		0x20
+#define V_GPIO_IN6		0x40
+#define V_GPIO_IN7		0x80
+/* R_GPIO_IN1 */
+#define V_GPIO_IN8		0x01
+#define V_GPIO_IN9		0x02
+#define V_GPIO_IN10		0x04
+#define V_GPIO_IN11		0x08
+#define V_GPIO_IN12		0x10
+#define V_GPIO_IN13		0x20
+#define V_GPIO_IN14		0x40
+#define V_GPIO_IN15		0x80
+/* R_GPI_IN0 */
+#define V_GPI_IN0		0x01
+#define V_GPI_IN1		0x02
+#define V_GPI_IN2		0x04
+#define V_GPI_IN3		0x08
+#define V_GPI_IN4		0x10
+#define V_GPI_IN5		0x20
+#define V_GPI_IN6		0x40
+#define V_GPI_IN7		0x80
+/* R_GPI_IN1 */
+#define V_GPI_IN8		0x01
+#define V_GPI_IN9		0x02
+#define V_GPI_IN10		0x04
+#define V_GPI_IN11		0x08
+#define V_GPI_IN12		0x10
+#define V_GPI_IN13		0x20
+#define V_GPI_IN14		0x40
+#define V_GPI_IN15		0x80
+/* R_GPI_IN2 */
+#define V_GPI_IN16		0x01
+#define V_GPI_IN17		0x02
+#define V_GPI_IN18		0x04
+#define V_GPI_IN19		0x08
+#define V_GPI_IN20		0x10
+#define V_GPI_IN21		0x20
+#define V_GPI_IN22		0x40
+#define V_GPI_IN23		0x80
+/* R_GPI_IN3 */
+#define V_GPI_IN24		0x01
+#define V_GPI_IN25		0x02
+#define V_GPI_IN26		0x04
+#define V_GPI_IN27		0x08
+#define V_GPI_IN28		0x10
+#define V_GPI_IN29		0x20
+#define V_GPI_IN30		0x40
+#define V_GPI_IN31		0x80
+
+/* map of all registers, used for debugging */
+
+#ifdef HFC_REGISTER_DEBUG
+struct hfc_register_names {
+	char *name;
+	u_char reg;
+} hfc_register_names[] = {
+	/* write registers */
+	{"R_CIRM",		0x00},
+	{"R_CTRL",		0x01},
+	{"R_BRG_PCM_CFG ",	0x02},
+	{"R_RAM_ADDR0",		0x08},
+	{"R_RAM_ADDR1",		0x09},
+	{"R_RAM_ADDR2",		0x0A},
+	{"R_FIRST_FIFO",	0x0B},
+	{"R_RAM_SZ",		0x0C},
+	{"R_FIFO_MD",		0x0D},
+	{"R_INC_RES_FIFO",	0x0E},
+	{"R_FIFO / R_FSM_IDX",	0x0F},
+	{"R_SLOT",		0x10},
+	{"R_IRQMSK_MISC",	0x11},
+	{"R_SCI_MSK",		0x12},
+	{"R_IRQ_CTRL",		0x13},
+	{"R_PCM_MD0",		0x14},
+	{"R_0x15",		0x15},
+	{"R_ST_SEL",		0x16},
+	{"R_ST_SYNC",		0x17},
+	{"R_CONF_EN",		0x18},
+	{"R_TI_WD",		0x1A},
+	{"R_BERT_WD_MD",	0x1B},
+	{"R_DTMF",		0x1C},
+	{"R_DTMF_N",		0x1D},
+	{"R_E1_XX_STA",		0x20},
+	{"R_LOS0",		0x22},
+	{"R_LOS1",		0x23},
+	{"R_RX0",		0x24},
+	{"R_RX_FR0",		0x25},
+	{"R_RX_FR1",		0x26},
+	{"R_TX0",		0x28},
+	{"R_TX1",		0x29},
+	{"R_TX_FR0",		0x2C},
+	{"R_TX_FR1",		0x2D},
+	{"R_TX_FR2",		0x2E},
+	{"R_JATT_ATT",		0x2F},
+	{"A_ST_xx_STA/R_RX_OFF", 0x30},
+	{"A_ST_CTRL0/R_SYNC_OUT", 0x31},
+	{"A_ST_CTRL1",		0x32},
+	{"A_ST_CTRL2",		0x33},
+	{"A_ST_SQ_WR",		0x34},
+	{"R_TX_OFF",		0x34},
+	{"R_SYNC_CTRL",		0x35},
+	{"A_ST_CLK_DLY",	0x37},
+	{"R_PWM0",		0x38},
+	{"R_PWM1",		0x39},
+	{"A_ST_B1_TX",		0x3C},
+	{"A_ST_B2_TX",		0x3D},
+	{"A_ST_D_TX",		0x3E},
+	{"R_GPIO_OUT0",		0x40},
+	{"R_GPIO_OUT1",		0x41},
+	{"R_GPIO_EN0",		0x42},
+	{"R_GPIO_EN1",		0x43},
+	{"R_GPIO_SEL",		0x44},
+	{"R_BRG_CTRL",		0x45},
+	{"R_PWM_MD",		0x46},
+	{"R_BRG_MD",		0x47},
+	{"R_BRG_TIM0",		0x48},
+	{"R_BRG_TIM1",		0x49},
+	{"R_BRG_TIM2",		0x4A},
+	{"R_BRG_TIM3",		0x4B},
+	{"R_BRG_TIM_SEL01",	0x4C},
+	{"R_BRG_TIM_SEL23",	0x4D},
+	{"R_BRG_TIM_SEL45",	0x4E},
+	{"R_BRG_TIM_SEL67",	0x4F},
+	{"A_FIFO_DATA0-2",	0x80},
+	{"A_FIFO_DATA0-2_NOINC", 0x84},
+	{"R_RAM_DATA",		0xC0},
+	{"A_SL_CFG",		0xD0},
+	{"A_CONF",		0xD1},
+	{"A_CH_MSK",		0xF4},
+	{"A_CON_HDLC",		0xFA},
+	{"A_SUBCH_CFG",		0xFB},
+	{"A_CHANNEL",		0xFC},
+	{"A_FIFO_SEQ",		0xFD},
+	{"A_IRQ_MSK",		0xFF},
+	{NULL, 0},
+
+	/* read registers */
+	{"A_Z1",		0x04},
+	{"A_Z1H",		0x05},
+	{"A_Z2",		0x06},
+	{"A_Z2H",		0x07},
+	{"A_F1",		0x0C},
+	{"A_F2",		0x0D},
+	{"R_IRQ_OVIEW",		0x10},
+	{"R_IRQ_MISC",		0x11},
+	{"R_IRQ_STATECH",	0x12},
+	{"R_CONF_OFLOW",	0x14},
+	{"R_RAM_USE",		0x15},
+	{"R_CHIP_ID",		0x16},
+	{"R_BERT_STA",		0x17},
+	{"R_F0_CNTL",		0x18},
+	{"R_F0_CNTH",		0x19},
+	{"R_BERT_ECL",		0x1A},
+	{"R_BERT_ECH",		0x1B},
+	{"R_STATUS",		0x1C},
+	{"R_CHIP_RV",		0x1F},
+	{"R_STATE",		0x20},
+	{"R_SYNC_STA",		0x24},
+	{"R_RX_SL0_0",		0x25},
+	{"R_RX_SL0_1",		0x26},
+	{"R_RX_SL0_2",		0x27},
+	{"R_JATT_DIR",		0x2b},
+	{"R_SLIP",		0x2c},
+	{"A_ST_RD_STA",		0x30},
+	{"R_FAS_ECL",		0x30},
+	{"R_FAS_ECH",		0x31},
+	{"R_VIO_ECL",		0x32},
+	{"R_VIO_ECH",		0x33},
+	{"R_CRC_ECL / A_ST_SQ_RD", 0x34},
+	{"R_CRC_ECH",		0x35},
+	{"R_E_ECL",		0x36},
+	{"R_E_ECH",		0x37},
+	{"R_SA6_SA13_ECL",	0x38},
+	{"R_SA6_SA13_ECH",	0x39},
+	{"R_SA6_SA23_ECL",	0x3A},
+	{"R_SA6_SA23_ECH",	0x3B},
+	{"A_ST_B1_RX",		0x3C},
+	{"A_ST_B2_RX",		0x3D},
+	{"A_ST_D_RX",		0x3E},
+	{"A_ST_E_RX",		0x3F},
+	{"R_GPIO_IN0",		0x40},
+	{"R_GPIO_IN1",		0x41},
+	{"R_GPI_IN0",		0x44},
+	{"R_GPI_IN1",		0x45},
+	{"R_GPI_IN2",		0x46},
+	{"R_GPI_IN3",		0x47},
+	{"A_FIFO_DATA0-2",	0x80},
+	{"A_FIFO_DATA0-2_NOINC", 0x84},
+	{"R_INT_DATA",		0x88},
+	{"R_RAM_DATA",		0xC0},
+	{"R_IRQ_FIFO_BL0",	0xC8},
+	{"R_IRQ_FIFO_BL1",	0xC9},
+	{"R_IRQ_FIFO_BL2",	0xCA},
+	{"R_IRQ_FIFO_BL3",	0xCB},
+	{"R_IRQ_FIFO_BL4",	0xCC},
+	{"R_IRQ_FIFO_BL5",	0xCD},
+	{"R_IRQ_FIFO_BL6",	0xCE},
+	{"R_IRQ_FIFO_BL7",	0xCF},
+};
+#endif /* HFC_REGISTER_DEBUG */
+
diff --git a/drivers/isdn/hardware/mISDN/hfc_pci.h b/drivers/isdn/hardware/mISDN/hfc_pci.h
new file mode 100644
index 000000000000..fd2c9be6d849
--- /dev/null
+++ b/drivers/isdn/hardware/mISDN/hfc_pci.h
@@ -0,0 +1,228 @@
+/*
+ *  specific defines for CCD's HFC 2BDS0 PCI chips
+ *
+ * Author     Werner Cornelius (werner@isdn4linux.de)
+ *
+ * Copyright 1999  by Werner Cornelius (werner@isdn4linux.de)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ */
+
+/*
+ * thresholds for transparent B-channel mode
+ * change mask and threshold simultaneously
+ */
+#define HFCPCI_BTRANS_THRESHOLD 128
+#define HFCPCI_BTRANS_MAX	256
+#define HFCPCI_BTRANS_THRESMASK 0x00
+
+/* defines for PCI config */
+#define PCI_ENA_MEMIO		0x02
+#define PCI_ENA_MASTER		0x04
+
+/* GCI/IOM bus monitor registers */
+#define HCFPCI_C_I		0x08
+#define HFCPCI_TRxR		0x0C
+#define HFCPCI_MON1_D		0x28
+#define HFCPCI_MON2_D		0x2C
+
+/* GCI/IOM bus timeslot registers */
+#define HFCPCI_B1_SSL		0x80
+#define HFCPCI_B2_SSL		0x84
+#define HFCPCI_AUX1_SSL		0x88
+#define HFCPCI_AUX2_SSL		0x8C
+#define HFCPCI_B1_RSL		0x90
+#define HFCPCI_B2_RSL		0x94
+#define HFCPCI_AUX1_RSL		0x98
+#define HFCPCI_AUX2_RSL		0x9C
+
+/* GCI/IOM bus data registers */
+#define HFCPCI_B1_D		0xA0
+#define HFCPCI_B2_D		0xA4
+#define HFCPCI_AUX1_D		0xA8
+#define HFCPCI_AUX2_D		0xAC
+
+/* GCI/IOM bus configuration registers */
+#define HFCPCI_MST_EMOD		0xB4
+#define HFCPCI_MST_MODE		0xB8
+#define HFCPCI_CONNECT 		0xBC
+
+
+/* Interrupt and status registers */
+#define HFCPCI_FIFO_EN		0x44
+#define HFCPCI_TRM		0x48
+#define HFCPCI_B_MODE		0x4C
+#define HFCPCI_CHIP_ID		0x58
+#define HFCPCI_CIRM		0x60
+#define HFCPCI_CTMT		0x64
+#define HFCPCI_INT_M1		0x68
+#define HFCPCI_INT_M2		0x6C
+#define HFCPCI_INT_S1		0x78
+#define HFCPCI_INT_S2		0x7C
+#define HFCPCI_STATUS		0x70
+
+/* S/T section registers */
+#define HFCPCI_STATES		0xC0
+#define HFCPCI_SCTRL		0xC4
+#define HFCPCI_SCTRL_E		0xC8
+#define HFCPCI_SCTRL_R		0xCC
+#define HFCPCI_SQ		0xD0
+#define HFCPCI_CLKDEL		0xDC
+#define HFCPCI_B1_REC		0xF0
+#define HFCPCI_B1_SEND		0xF0
+#define HFCPCI_B2_REC		0xF4
+#define HFCPCI_B2_SEND		0xF4
+#define HFCPCI_D_REC		0xF8
+#define HFCPCI_D_SEND		0xF8
+#define HFCPCI_E_REC		0xFC
+
+
+/* bits in status register (READ) */
+#define HFCPCI_PCI_PROC		0x02
+#define HFCPCI_NBUSY		0x04
+#define HFCPCI_TIMER_ELAP	0x10
+#define HFCPCI_STATINT		0x20
+#define HFCPCI_FRAMEINT		0x40
+#define HFCPCI_ANYINT		0x80
+
+/* bits in CTMT (Write) */
+#define HFCPCI_CLTIMER		0x80
+#define HFCPCI_TIM3_125		0x04
+#define HFCPCI_TIM25		0x10
+#define HFCPCI_TIM50		0x14
+#define HFCPCI_TIM400		0x18
+#define HFCPCI_TIM800		0x1C
+#define HFCPCI_AUTO_TIMER	0x20
+#define HFCPCI_TRANSB2		0x02
+#define HFCPCI_TRANSB1		0x01
+
+/* bits in CIRM (Write) */
+#define HFCPCI_AUX_MSK		0x07
+#define HFCPCI_RESET		0x08
+#define HFCPCI_B1_REV		0x40
+#define HFCPCI_B2_REV		0x80
+
+/* bits in INT_M1 and INT_S1 */
+#define HFCPCI_INTS_B1TRANS	0x01
+#define HFCPCI_INTS_B2TRANS	0x02
+#define HFCPCI_INTS_DTRANS	0x04
+#define HFCPCI_INTS_B1REC	0x08
+#define HFCPCI_INTS_B2REC	0x10
+#define HFCPCI_INTS_DREC	0x20
+#define HFCPCI_INTS_L1STATE	0x40
+#define HFCPCI_INTS_TIMER	0x80
+
+/* bits in INT_M2 */
+#define HFCPCI_PROC_TRANS	0x01
+#define HFCPCI_GCI_I_CHG	0x02
+#define HFCPCI_GCI_MON_REC	0x04
+#define HFCPCI_IRQ_ENABLE	0x08
+#define HFCPCI_PMESEL		0x80
+
+/* bits in STATES */
+#define HFCPCI_STATE_MSK	0x0F
+#define HFCPCI_LOAD_STATE	0x10
+#define HFCPCI_ACTIVATE		0x20
+#define HFCPCI_DO_ACTION	0x40
+#define HFCPCI_NT_G2_G3		0x80
+
+/* bits in HFCD_MST_MODE */
+#define HFCPCI_MASTER		0x01
+#define HFCPCI_SLAVE		0x00
+#define HFCPCI_F0IO_POSITIV	0x02
+#define HFCPCI_F0_NEGATIV	0x04
+#define HFCPCI_F0_2C4		0x08
+/* remaining bits are for codecs control */
+
+/* bits in HFCD_SCTRL */
+#define SCTRL_B1_ENA		0x01
+#define SCTRL_B2_ENA		0x02
+#define SCTRL_MODE_TE		0x00
+#define SCTRL_MODE_NT		0x04
+#define SCTRL_LOW_PRIO		0x08
+#define SCTRL_SQ_ENA		0x10
+#define SCTRL_TEST		0x20
+#define SCTRL_NONE_CAP		0x40
+#define SCTRL_PWR_DOWN		0x80
+
+/* bits in SCTRL_E  */
+#define HFCPCI_AUTO_AWAKE	0x01
+#define HFCPCI_DBIT_1		0x04
+#define HFCPCI_IGNORE_COL	0x08
+#define HFCPCI_CHG_B1_B2	0x80
+
+/* bits in FIFO_EN register */
+#define HFCPCI_FIFOEN_B1	0x03
+#define HFCPCI_FIFOEN_B2	0x0C
+#define HFCPCI_FIFOEN_DTX	0x10
+#define HFCPCI_FIFOEN_B1TX	0x01
+#define HFCPCI_FIFOEN_B1RX	0x02
+#define HFCPCI_FIFOEN_B2TX	0x04
+#define HFCPCI_FIFOEN_B2RX	0x08
+
+
+/* definitions of fifo memory area */
+#define MAX_D_FRAMES 15
+#define MAX_B_FRAMES 31
+#define B_SUB_VAL    0x200
+#define B_FIFO_SIZE  (0x2000 - B_SUB_VAL)
+#define D_FIFO_SIZE  512
+#define D_FREG_MASK  0xF
+
+struct zt {
+	unsigned short z1;  /* Z1 pointer 16 Bit */
+	unsigned short z2;  /* Z2 pointer 16 Bit */
+};
+
+struct dfifo {
+	u_char data[D_FIFO_SIZE]; /* FIFO data space */
+	u_char fill1[0x20A0-D_FIFO_SIZE]; /* reserved, do not use */
+	u_char f1, f2; /* f pointers */
+	u_char fill2[0x20C0-0x20A2]; /* reserved, do not use */
+	/* mask index with D_FREG_MASK for access */
+	struct zt za[MAX_D_FRAMES+1];
+	u_char fill3[0x4000-0x2100]; /* align 16K */
+};
+
+struct bzfifo {
+	struct zt	za[MAX_B_FRAMES+1]; /* only range 0x0..0x1F allowed */
+	u_char		f1, f2; /* f pointers */
+	u_char		fill[0x2100-0x2082]; /* alignment */
+};
+
+
+union fifo_area {
+	struct {
+		struct dfifo d_tx; /* D-send channel */
+		struct dfifo d_rx; /* D-receive channel */
+	} d_chan;
+	struct {
+		u_char		fill1[0x200];
+		u_char		txdat_b1[B_FIFO_SIZE];
+		struct bzfifo	txbz_b1;
+		struct bzfifo	txbz_b2;
+		u_char		txdat_b2[B_FIFO_SIZE];
+		u_char		fill2[D_FIFO_SIZE];
+		u_char		rxdat_b1[B_FIFO_SIZE];
+		struct bzfifo	rxbz_b1;
+		struct bzfifo	rxbz_b2;
+		u_char rxdat_b2[B_FIFO_SIZE];
+	} b_chans;
+	u_char fill[32768];
+};
+
+#define Write_hfc(a, b, c) (writeb(c, (a->hw.pci_io)+b))
+#define Read_hfc(a, b) (readb((a->hw.pci_io)+b))
diff --git a/drivers/isdn/hardware/mISDN/hfcmulti.c b/drivers/isdn/hardware/mISDN/hfcmulti.c
new file mode 100644
index 000000000000..1eac03f39d00
--- /dev/null
+++ b/drivers/isdn/hardware/mISDN/hfcmulti.c
@@ -0,0 +1,5319 @@
+/*
+ * hfcmulti.c  low level driver for hfc-4s/hfc-8s/hfc-e1 based cards
+ *
+ * Author	Andreas Eversberg (jolly@eversberg.eu)
+ * ported to mqueue mechanism:
+ *		Peter Sprenger (sprengermoving-bytes.de)
+ *
+ * inspired by existing hfc-pci driver:
+ * Copyright 1999  by Werner Cornelius (werner@isdn-development.de)
+ * Copyright 2008  by Karsten Keil (kkeil@suse.de)
+ * Copyright 2008  by Andreas Eversberg (jolly@eversberg.eu)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ *
+ * Thanks to Cologne Chip AG for this great controller!
+ */
+
+/*
+ * module parameters:
+ * type:
+ *	By default (0), the card is automatically detected.
+ *	Or use the following combinations:
+ *	Bit 0-7   = 0x00001 = HFC-E1 (1 port)
+ * or	Bit 0-7   = 0x00004 = HFC-4S (4 ports)
+ * or	Bit 0-7   = 0x00008 = HFC-8S (8 ports)
+ *	Bit 8     = 0x00100 = uLaw (instead of aLaw)
+ *	Bit 9     = 0x00200 = Disable DTMF detect on all B-channels via hardware
+ *	Bit 10    = spare
+ *	Bit 11    = 0x00800 = Force PCM bus into slave mode. (otherwhise auto)
+ * or   Bit 12    = 0x01000 = Force PCM bus into master mode. (otherwhise auto)
+ *	Bit 13	  = spare
+ *	Bit 14    = 0x04000 = Use external ram (128K)
+ *	Bit 15    = 0x08000 = Use external ram (512K)
+ *	Bit 16    = 0x10000 = Use 64 timeslots instead of 32
+ * or	Bit 17    = 0x20000 = Use 128 timeslots instead of anything else
+ *	Bit 18    = spare
+ *	Bit 19    = 0x80000 = Send the Watchdog a Signal (Dual E1 with Watchdog)
+ * (all other bits are reserved and shall be 0)
+ *	example: 0x20204 one HFC-4S with dtmf detection and 128 timeslots on PCM
+ *		 bus (PCM master)
+ *
+ * port: (optional or required for all ports on all installed cards)
+ *	HFC-4S/HFC-8S only bits:
+ *	Bit 0	  = 0x001 = Use master clock for this S/T interface
+ *			    (ony once per chip).
+ *	Bit 1     = 0x002 = transmitter line setup (non capacitive mode)
+ *			    Don't use this unless you know what you are doing!
+ *	Bit 2     = 0x004 = Disable E-channel. (No E-channel processing)
+ *	example: 0x0001,0x0000,0x0000,0x0000 one HFC-4S with master clock
+ *		 received from port 1
+ *
+ *	HFC-E1 only bits:
+ *	Bit 0     = 0x0001 = interface: 0=copper, 1=optical
+ *	Bit 1     = 0x0002 = reserved (later for 32 B-channels transparent mode)
+ *	Bit 2     = 0x0004 = Report LOS
+ *	Bit 3     = 0x0008 = Report AIS
+ *	Bit 4     = 0x0010 = Report SLIP
+ *	Bit 5     = 0x0020 = Report RDI
+ *	Bit 8     = 0x0100 = Turn off CRC-4 Multiframe Mode, use double frame
+ *			     mode instead.
+ *	Bit 9	  = 0x0200 = Force get clock from interface, even in NT mode.
+ * or	Bit 10	  = 0x0400 = Force put clock to interface, even in TE mode.
+ *	Bit 11    = 0x0800 = Use direct RX clock for PCM sync rather than PLL.
+ *			     (E1 only)
+ *	Bit 12-13 = 0xX000 = elastic jitter buffer (1-3), Set both bits to 0
+ *			     for default.
+ * (all other bits are reserved and shall be 0)
+ *
+ * debug:
+ *	NOTE: only one debug value must be given for all cards
+ *	enable debugging (see hfc_multi.h for debug options)
+ *
+ * poll:
+ *	NOTE: only one poll value must be given for all cards
+ *	Give the number of samples for each fifo process.
+ *	By default 128 is used. Decrease to reduce delay, increase to
+ *	reduce cpu load. If unsure, don't mess with it!
+ *	Valid is 8, 16, 32, 64, 128, 256.
+ *
+ * pcm:
+ *	NOTE: only one pcm value must be given for every card.
+ *	The PCM bus id tells the mISDNdsp module about the connected PCM bus.
+ *	By default (0), the PCM bus id is 100 for the card that is PCM master.
+ *	If multiple cards are PCM master (because they are not interconnected),
+ *	each card with PCM master will have increasing PCM id.
+ *	All PCM busses with the same ID are expected to be connected and have
+ *	common time slots slots.
+ *	Only one chip of the PCM bus must be master, the others slave.
+ *	-1 means no support of PCM bus not even.
+ *	Omit this value, if all cards are interconnected or none is connected.
+ *	If unsure, don't give this parameter.
+ *
+ * dslot:
+ *	NOTE: only one poll value must be given for every card.
+ *	Also this value must be given for non-E1 cards. If omitted, the E1
+ *	card has D-channel on time slot 16, which is default.
+ *	If 1..15 or 17..31, an alternate time slot is used for D-channel.
+ *	In this case, the application must be able to handle this.
+ *	If -1 is given, the D-channel is disabled and all 31 slots can be used
+ *	for B-channel. (only for specific applications)
+ *	If you don't know how to use it, you don't need it!
+ *
+ * iomode:
+ *	NOTE: only one mode value must be given for every card.
+ *	-> See hfc_multi.h for HFC_IO_MODE_* values
+ *	By default, the IO mode is pci memory IO (MEMIO).
+ *	Some cards requre specific IO mode, so it cannot be changed.
+ *	It may be usefull to set IO mode to register io (REGIO) to solve
+ *	PCI bridge problems.
+ *	If unsure, don't give this parameter.
+ *
+ * clockdelay_nt:
+ *	NOTE: only one clockdelay_nt value must be given once for all cards.
+ *	Give the value of the clock control register (A_ST_CLK_DLY)
+ *	of the S/T interfaces in NT mode.
+ *	This register is needed for the TBR3 certification, so don't change it.
+ *
+ * clockdelay_te:
+ *	NOTE: only one clockdelay_te value must be given once
+ *	Give the value of the clock control register (A_ST_CLK_DLY)
+ *	of the S/T interfaces in TE mode.
+ *	This register is needed for the TBR3 certification, so don't change it.
+ */
+
+/*
+ * debug register access (never use this, it will flood your system log)
+ * #define HFC_REGISTER_DEBUG
+ */
+
+static const char *hfcmulti_revision = "2.02";
+
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/delay.h>
+#include <linux/mISDNhw.h>
+#include <linux/mISDNdsp.h>
+
+/*
+#define IRQCOUNT_DEBUG
+#define IRQ_DEBUG
+*/
+
+#include "hfc_multi.h"
+#ifdef ECHOPREP
+#include "gaintab.h"
+#endif
+
+#define	MAX_CARDS	8
+#define	MAX_PORTS	(8 * MAX_CARDS)
+
+static LIST_HEAD(HFClist);
+static spinlock_t HFClock; /* global hfc list lock */
+
+static void ph_state_change(struct dchannel *);
+static void (*hfc_interrupt)(void);
+static void (*register_interrupt)(void);
+static int (*unregister_interrupt)(void);
+static int interrupt_registered;
+
+static struct hfc_multi *syncmaster;
+int plxsd_master; /* if we have a master card (yet) */
+static spinlock_t plx_lock; /* may not acquire other lock inside */
+EXPORT_SYMBOL(plx_lock);
+
+#define	TYP_E1		1
+#define	TYP_4S		4
+#define TYP_8S		8
+
+static int poll_timer = 6;	/* default = 128 samples = 16ms */
+/* number of POLL_TIMER interrupts for G2 timeout (ca 1s) */
+static int nt_t1_count[] = { 3840, 1920, 960, 480, 240, 120, 60, 30  };
+#define	CLKDEL_TE	0x0f	/* CLKDEL in TE mode */
+#define	CLKDEL_NT	0x6c	/* CLKDEL in NT mode
+				   (0x60 MUST be included!) */
+static u_char silence =	0xff;	/* silence by LAW */
+
+#define	DIP_4S	0x1		/* DIP Switches for Beronet 1S/2S/4S cards */
+#define	DIP_8S	0x2		/* DIP Switches for Beronet 8S+ cards */
+#define	DIP_E1	0x3		/* DIP Switches for Beronet E1 cards */
+
+/*
+ * module stuff
+ */
+
+static uint	type[MAX_CARDS];
+static uint	pcm[MAX_CARDS];
+static uint	dslot[MAX_CARDS];
+static uint	iomode[MAX_CARDS];
+static uint	port[MAX_PORTS];
+static uint	debug;
+static uint	poll;
+static uint	timer;
+static uint	clockdelay_te = CLKDEL_TE;
+static uint	clockdelay_nt = CLKDEL_NT;
+
+static int	HFC_cnt, Port_cnt, PCM_cnt = 99;
+
+MODULE_AUTHOR("Andreas Eversberg");
+MODULE_LICENSE("GPL");
+module_param(debug, uint, S_IRUGO | S_IWUSR);
+module_param(poll, uint, S_IRUGO | S_IWUSR);
+module_param(timer, uint, S_IRUGO | S_IWUSR);
+module_param(clockdelay_te, uint, S_IRUGO | S_IWUSR);
+module_param(clockdelay_nt, uint, S_IRUGO | S_IWUSR);
+module_param_array(type, uint, NULL, S_IRUGO | S_IWUSR);
+module_param_array(pcm, uint, NULL, S_IRUGO | S_IWUSR);
+module_param_array(dslot, uint, NULL, S_IRUGO | S_IWUSR);
+module_param_array(iomode, uint, NULL, S_IRUGO | S_IWUSR);
+module_param_array(port, uint, NULL, S_IRUGO | S_IWUSR);
+
+#ifdef HFC_REGISTER_DEBUG
+#define HFC_outb(hc, reg, val) \
+	(hc->HFC_outb(hc, reg, val, __func__, __LINE__))
+#define HFC_outb_nodebug(hc, reg, val) \
+	(hc->HFC_outb_nodebug(hc, reg, val, __func__, __LINE__))
+#define HFC_inb(hc, reg) \
+	(hc->HFC_inb(hc, reg, __func__, __LINE__))
+#define HFC_inb_nodebug(hc, reg) \
+	(hc->HFC_inb_nodebug(hc, reg, __func__, __LINE__))
+#define HFC_inw(hc, reg) \
+	(hc->HFC_inw(hc, reg, __func__, __LINE__))
+#define HFC_inw_nodebug(hc, reg) \
+	(hc->HFC_inw_nodebug(hc, reg, __func__, __LINE__))
+#define HFC_wait(hc) \
+	(hc->HFC_wait(hc, __func__, __LINE__))
+#define HFC_wait_nodebug(hc) \
+	(hc->HFC_wait_nodebug(hc, __func__, __LINE__))
+#else
+#define HFC_outb(hc, reg, val)		(hc->HFC_outb(hc, reg, val))
+#define HFC_outb_nodebug(hc, reg, val)	(hc->HFC_outb_nodebug(hc, reg, val))
+#define HFC_inb(hc, reg)		(hc->HFC_inb(hc, reg))
+#define HFC_inb_nodebug(hc, reg)	(hc->HFC_inb_nodebug(hc, reg))
+#define HFC_inw(hc, reg)		(hc->HFC_inw(hc, reg))
+#define HFC_inw_nodebug(hc, reg)	(hc->HFC_inw_nodebug(hc, reg))
+#define HFC_wait(hc)			(hc->HFC_wait(hc))
+#define HFC_wait_nodebug(hc)		(hc->HFC_wait_nodebug(hc))
+#endif
+
+/* HFC_IO_MODE_PCIMEM */
+static void
+#ifdef HFC_REGISTER_DEBUG
+HFC_outb_pcimem(struct hfc_multi *hc, u_char reg, u_char val,
+		const char *function, int line)
+#else
+HFC_outb_pcimem(struct hfc_multi *hc, u_char reg, u_char val)
+#endif
+{
+	writeb(val, (hc->pci_membase)+reg);
+}
+static u_char
+#ifdef HFC_REGISTER_DEBUG
+HFC_inb_pcimem(struct hfc_multi *hc, u_char reg, const char *function, int line)
+#else
+HFC_inb_pcimem(struct hfc_multi *hc, u_char reg)
+#endif
+{
+	return readb((hc->pci_membase)+reg);
+}
+static u_short
+#ifdef HFC_REGISTER_DEBUG
+HFC_inw_pcimem(struct hfc_multi *hc, u_char reg, const char *function, int line)
+#else
+HFC_inw_pcimem(struct hfc_multi *hc, u_char reg)
+#endif
+{
+	return readw((hc->pci_membase)+reg);
+}
+static void
+#ifdef HFC_REGISTER_DEBUG
+HFC_wait_pcimem(struct hfc_multi *hc, const char *function, int line)
+#else
+HFC_wait_pcimem(struct hfc_multi *hc)
+#endif
+{
+	while (readb((hc->pci_membase)+R_STATUS) & V_BUSY);
+}
+
+/* HFC_IO_MODE_REGIO */
+static void
+#ifdef HFC_REGISTER_DEBUG
+HFC_outb_regio(struct hfc_multi *hc, u_char reg, u_char val,
+	const char *function, int line)
+#else
+HFC_outb_regio(struct hfc_multi *hc, u_char reg, u_char val)
+#endif
+{
+	outb(reg, (hc->pci_iobase)+4);
+	outb(val, hc->pci_iobase);
+}
+static u_char
+#ifdef HFC_REGISTER_DEBUG
+HFC_inb_regio(struct hfc_multi *hc, u_char reg, const char *function, int line)
+#else
+HFC_inb_regio(struct hfc_multi *hc, u_char reg)
+#endif
+{
+	outb(reg, (hc->pci_iobase)+4);
+	return inb(hc->pci_iobase);
+}
+static u_short
+#ifdef HFC_REGISTER_DEBUG
+HFC_inw_regio(struct hfc_multi *hc, u_char reg, const char *function, int line)
+#else
+HFC_inw_regio(struct hfc_multi *hc, u_char reg)
+#endif
+{
+	outb(reg, (hc->pci_iobase)+4);
+	return inw(hc->pci_iobase);
+}
+static void
+#ifdef HFC_REGISTER_DEBUG
+HFC_wait_regio(struct hfc_multi *hc, const char *function, int line)
+#else
+HFC_wait_regio(struct hfc_multi *hc)
+#endif
+{
+	outb(R_STATUS, (hc->pci_iobase)+4);
+	while (inb(hc->pci_iobase) & V_BUSY);
+}
+
+#ifdef HFC_REGISTER_DEBUG
+static void
+HFC_outb_debug(struct hfc_multi *hc, u_char reg, u_char val,
+		const char *function, int line)
+{
+	char regname[256] = "", bits[9] = "xxxxxxxx";
+	int i;
+
+	i = -1;
+	while (hfc_register_names[++i].name) {
+		if (hfc_register_names[i].reg == reg)
+			strcat(regname, hfc_register_names[i].name);
+	}
+	if (regname[0] == '\0')
+		strcpy(regname, "register");
+
+	bits[7] = '0'+(!!(val&1));
+	bits[6] = '0'+(!!(val&2));
+	bits[5] = '0'+(!!(val&4));
+	bits[4] = '0'+(!!(val&8));
+	bits[3] = '0'+(!!(val&16));
+	bits[2] = '0'+(!!(val&32));
+	bits[1] = '0'+(!!(val&64));
+	bits[0] = '0'+(!!(val&128));
+	printk(KERN_DEBUG
+	    "HFC_outb(chip %d, %02x=%s, 0x%02x=%s); in %s() line %d\n",
+	    hc->id, reg, regname, val, bits, function, line);
+	HFC_outb_nodebug(hc, reg, val);
+}
+static u_char
+HFC_inb_debug(struct hfc_multi *hc, u_char reg, const char *function, int line)
+{
+	char regname[256] = "", bits[9] = "xxxxxxxx";
+	u_char val = HFC_inb_nodebug(hc, reg);
+	int i;
+
+	i = 0;
+	while (hfc_register_names[i++].name)
+		;
+	while (hfc_register_names[++i].name) {
+		if (hfc_register_names[i].reg == reg)
+			strcat(regname, hfc_register_names[i].name);
+	}
+	if (regname[0] == '\0')
+		strcpy(regname, "register");
+
+	bits[7] = '0'+(!!(val&1));
+	bits[6] = '0'+(!!(val&2));
+	bits[5] = '0'+(!!(val&4));
+	bits[4] = '0'+(!!(val&8));
+	bits[3] = '0'+(!!(val&16));
+	bits[2] = '0'+(!!(val&32));
+	bits[1] = '0'+(!!(val&64));
+	bits[0] = '0'+(!!(val&128));
+	printk(KERN_DEBUG
+	    "HFC_inb(chip %d, %02x=%s) = 0x%02x=%s; in %s() line %d\n",
+	    hc->id, reg, regname, val, bits, function, line);
+	return val;
+}
+static u_short
+HFC_inw_debug(struct hfc_multi *hc, u_char reg, const char *function, int line)
+{
+	char regname[256] = "";
+	u_short val = HFC_inw_nodebug(hc, reg);
+	int i;
+
+	i = 0;
+	while (hfc_register_names[i++].name)
+		;
+	while (hfc_register_names[++i].name) {
+		if (hfc_register_names[i].reg == reg)
+			strcat(regname, hfc_register_names[i].name);
+	}
+	if (regname[0] == '\0')
+		strcpy(regname, "register");
+
+	printk(KERN_DEBUG
+	    "HFC_inw(chip %d, %02x=%s) = 0x%04x; in %s() line %d\n",
+	    hc->id, reg, regname, val, function, line);
+	return val;
+}
+static void
+HFC_wait_debug(struct hfc_multi *hc, const char *function, int line)
+{
+	printk(KERN_DEBUG "HFC_wait(chip %d); in %s() line %d\n",
+	    hc->id, function, line);
+	HFC_wait_nodebug(hc);
+}
+#endif
+
+/* write fifo data (REGIO) */
+void
+write_fifo_regio(struct hfc_multi *hc, u_char *data, int len)
+{
+	outb(A_FIFO_DATA0, (hc->pci_iobase)+4);
+	while (len>>2) {
+		outl(cpu_to_le32(*(u32 *)data), hc->pci_iobase);
+		data += 4;
+		len -= 4;
+	}
+	while (len>>1) {
+		outw(cpu_to_le16(*(u16 *)data), hc->pci_iobase);
+		data += 2;
+		len -= 2;
+	}
+	while (len) {
+		outb(*data, hc->pci_iobase);
+		data++;
+		len--;
+	}
+}
+/* write fifo data (PCIMEM) */
+void
+write_fifo_pcimem(struct hfc_multi *hc, u_char *data, int len)
+{
+	while (len>>2) {
+		writel(cpu_to_le32(*(u32 *)data),
+			hc->pci_membase + A_FIFO_DATA0);
+		data += 4;
+		len -= 4;
+	}
+	while (len>>1) {
+		writew(cpu_to_le16(*(u16 *)data),
+			hc->pci_membase + A_FIFO_DATA0);
+		data += 2;
+		len -= 2;
+	}
+	while (len) {
+		writeb(*data, hc->pci_membase + A_FIFO_DATA0);
+		data++;
+		len--;
+	}
+}
+/* read fifo data (REGIO) */
+void
+read_fifo_regio(struct hfc_multi *hc, u_char *data, int len)
+{
+	outb(A_FIFO_DATA0, (hc->pci_iobase)+4);
+	while (len>>2) {
+		*(u32 *)data = le32_to_cpu(inl(hc->pci_iobase));
+		data += 4;
+		len -= 4;
+	}
+	while (len>>1) {
+		*(u16 *)data = le16_to_cpu(inw(hc->pci_iobase));
+		data += 2;
+		len -= 2;
+	}
+	while (len) {
+		*data = inb(hc->pci_iobase);
+		data++;
+		len--;
+	}
+}
+
+/* read fifo data (PCIMEM) */
+void
+read_fifo_pcimem(struct hfc_multi *hc, u_char *data, int len)
+{
+	while (len>>2) {
+		*(u32 *)data =
+			le32_to_cpu(readl(hc->pci_membase + A_FIFO_DATA0));
+		data += 4;
+		len -= 4;
+	}
+	while (len>>1) {
+		*(u16 *)data =
+			le16_to_cpu(readw(hc->pci_membase + A_FIFO_DATA0));
+		data += 2;
+		len -= 2;
+	}
+	while (len) {
+		*data = readb(hc->pci_membase + A_FIFO_DATA0);
+		data++;
+		len--;
+	}
+}
+
+
+static void
+enable_hwirq(struct hfc_multi *hc)
+{
+	hc->hw.r_irq_ctrl |= V_GLOB_IRQ_EN;
+	HFC_outb(hc, R_IRQ_CTRL, hc->hw.r_irq_ctrl);
+}
+
+static void
+disable_hwirq(struct hfc_multi *hc)
+{
+	hc->hw.r_irq_ctrl &= ~((u_char)V_GLOB_IRQ_EN);
+	HFC_outb(hc, R_IRQ_CTRL, hc->hw.r_irq_ctrl);
+}
+
+#define	NUM_EC 2
+#define	MAX_TDM_CHAN 32
+
+
+inline void
+enablepcibridge(struct hfc_multi *c)
+{
+	HFC_outb(c, R_BRG_PCM_CFG, (0x0 << 6) | 0x3); /* was _io before */
+}
+
+inline void
+disablepcibridge(struct hfc_multi *c)
+{
+	HFC_outb(c, R_BRG_PCM_CFG, (0x0 << 6) | 0x2); /* was _io before */
+}
+
+inline unsigned char
+readpcibridge(struct hfc_multi *hc, unsigned char address)
+{
+	unsigned short cipv;
+	unsigned char data;
+
+	if (!hc->pci_iobase)
+		return 0;
+
+	/* slow down a PCI read access by 1 PCI clock cycle */
+	HFC_outb(hc, R_CTRL, 0x4); /*was _io before*/
+
+	if (address == 0)
+		cipv = 0x4000;
+	else
+		cipv = 0x5800;
+
+	/* select local bridge port address by writing to CIP port */
+	/* data = HFC_inb(c, cipv); * was _io before */
+	outw(cipv, hc->pci_iobase + 4);
+	data = inb(hc->pci_iobase);
+
+	/* restore R_CTRL for normal PCI read cycle speed */
+	HFC_outb(hc, R_CTRL, 0x0); /* was _io before */
+
+	return data;
+}
+
+inline void
+writepcibridge(struct hfc_multi *hc, unsigned char address, unsigned char data)
+{
+	unsigned short cipv;
+	unsigned int datav;
+
+	if (!hc->pci_iobase)
+		return;
+
+	if (address == 0)
+		cipv = 0x4000;
+	else
+		cipv = 0x5800;
+
+	/* select local bridge port address by writing to CIP port */
+	outw(cipv, hc->pci_iobase + 4);
+	/* define a 32 bit dword with 4 identical bytes for write sequence */
+	datav = data | ((__u32) data << 8) | ((__u32) data << 16) |
+	    ((__u32) data << 24);
+
+	/*
+	 * write this 32 bit dword to the bridge data port
+	 * this will initiate a write sequence of up to 4 writes to the same
+	 * address on the local bus interface the number of write accesses
+	 * is undefined but >=1 and depends on the next PCI transaction
+	 * during write sequence on the local bus
+	 */
+	outl(datav, hc->pci_iobase);
+}
+
+inline void
+cpld_set_reg(struct hfc_multi *hc, unsigned char reg)
+{
+	/* Do data pin read low byte */
+	HFC_outb(hc, R_GPIO_OUT1, reg);
+}
+
+inline void
+cpld_write_reg(struct hfc_multi *hc, unsigned char reg, unsigned char val)
+{
+	cpld_set_reg(hc, reg);
+
+	enablepcibridge(hc);
+	writepcibridge(hc, 1, val);
+	disablepcibridge(hc);
+
+	return;
+}
+
+inline unsigned char
+cpld_read_reg(struct hfc_multi *hc, unsigned char reg)
+{
+	unsigned char bytein;
+
+	cpld_set_reg(hc, reg);
+
+	/* Do data pin read low byte */
+	HFC_outb(hc, R_GPIO_OUT1, reg);
+
+	enablepcibridge(hc);
+	bytein = readpcibridge(hc, 1);
+	disablepcibridge(hc);
+
+	return bytein;
+}
+
+inline void
+vpm_write_address(struct hfc_multi *hc, unsigned short addr)
+{
+	cpld_write_reg(hc, 0, 0xff & addr);
+	cpld_write_reg(hc, 1, 0x01 & (addr >> 8));
+}
+
+inline unsigned short
+vpm_read_address(struct hfc_multi *c)
+{
+	unsigned short addr;
+	unsigned short highbit;
+
+	addr = cpld_read_reg(c, 0);
+	highbit = cpld_read_reg(c, 1);
+
+	addr = addr | (highbit << 8);
+
+	return addr & 0x1ff;
+}
+
+inline unsigned char
+vpm_in(struct hfc_multi *c, int which, unsigned short addr)
+{
+	unsigned char res;
+
+	vpm_write_address(c, addr);
+
+	if (!which)
+		cpld_set_reg(c, 2);
+	else
+		cpld_set_reg(c, 3);
+
+	enablepcibridge(c);
+	res = readpcibridge(c, 1);
+	disablepcibridge(c);
+
+	cpld_set_reg(c, 0);
+
+	return res;
+}
+
+inline void
+vpm_out(struct hfc_multi *c, int which, unsigned short addr,
+    unsigned char data)
+{
+	vpm_write_address(c, addr);
+
+	enablepcibridge(c);
+
+	if (!which)
+		cpld_set_reg(c, 2);
+	else
+		cpld_set_reg(c, 3);
+
+	writepcibridge(c, 1, data);
+
+	cpld_set_reg(c, 0);
+
+	disablepcibridge(c);
+
+	{
+	unsigned char regin;
+	regin = vpm_in(c, which, addr);
+	if (regin != data)
+		printk(KERN_DEBUG "Wrote 0x%x to register 0x%x but got back "
+			"0x%x\n", data, addr, regin);
+	}
+
+}
+
+
+void
+vpm_init(struct hfc_multi *wc)
+{
+	unsigned char reg;
+	unsigned int mask;
+	unsigned int i, x, y;
+	unsigned int ver;
+
+	for (x = 0; x < NUM_EC; x++) {
+		/* Setup GPIO's */
+		if (!x) {
+			ver = vpm_in(wc, x, 0x1a0);
+			printk(KERN_DEBUG "VPM: Chip %d: ver %02x\n", x, ver);
+		}
+
+		for (y = 0; y < 4; y++) {
+			vpm_out(wc, x, 0x1a8 + y, 0x00); /* GPIO out */
+			vpm_out(wc, x, 0x1ac + y, 0x00); /* GPIO dir */
+			vpm_out(wc, x, 0x1b0 + y, 0x00); /* GPIO sel */
+		}
+
+		/* Setup TDM path - sets fsync and tdm_clk as inputs */
+		reg = vpm_in(wc, x, 0x1a3); /* misc_con */
+		vpm_out(wc, x, 0x1a3, reg & ~2);
+
+		/* Setup Echo length (256 taps) */
+		vpm_out(wc, x, 0x022, 1);
+		vpm_out(wc, x, 0x023, 0xff);
+
+		/* Setup timeslots */
+		vpm_out(wc, x, 0x02f, 0x00);
+		mask = 0x02020202 << (x * 4);
+
+		/* Setup the tdm channel masks for all chips */
+		for (i = 0; i < 4; i++)
+			vpm_out(wc, x, 0x33 - i, (mask >> (i << 3)) & 0xff);
+
+		/* Setup convergence rate */
+		printk(KERN_DEBUG "VPM: A-law mode\n");
+		reg = 0x00 | 0x10 | 0x01;
+		vpm_out(wc, x, 0x20, reg);
+		printk(KERN_DEBUG "VPM reg 0x20 is %x\n", reg);
+		/*vpm_out(wc, x, 0x20, (0x00 | 0x08 | 0x20 | 0x10)); */
+
+		vpm_out(wc, x, 0x24, 0x02);
+		reg = vpm_in(wc, x, 0x24);
+		printk(KERN_DEBUG "NLP Thresh is set to %d (0x%x)\n", reg, reg);
+
+		/* Initialize echo cans */
+		for (i = 0; i < MAX_TDM_CHAN; i++) {
+			if (mask & (0x00000001 << i))
+				vpm_out(wc, x, i, 0x00);
+		}
+
+		/*
+		 * ARM arch at least disallows a udelay of
+		 * more than 2ms... it gives a fake "__bad_udelay"
+		 * reference at link-time.
+		 * long delays in kernel code are pretty sucky anyway
+		 * for now work around it using 5 x 2ms instead of 1 x 10ms
+		 */
+
+		udelay(2000);
+		udelay(2000);
+		udelay(2000);
+		udelay(2000);
+		udelay(2000);
+
+		/* Put in bypass mode */
+		for (i = 0; i < MAX_TDM_CHAN; i++) {
+			if (mask & (0x00000001 << i))
+				vpm_out(wc, x, i, 0x01);
+		}
+
+		/* Enable bypass */
+		for (i = 0; i < MAX_TDM_CHAN; i++) {
+			if (mask & (0x00000001 << i))
+				vpm_out(wc, x, 0x78 + i, 0x01);
+		}
+
+	}
+}
+
+void
+vpm_check(struct hfc_multi *hctmp)
+{
+	unsigned char gpi2;
+
+	gpi2 = HFC_inb(hctmp, R_GPI_IN2);
+
+	if ((gpi2 & 0x3) != 0x3)
+		printk(KERN_DEBUG "Got interrupt 0x%x from VPM!\n", gpi2);
+}
+
+
+/*
+ * Interface to enable/disable the HW Echocan
+ *
+ * these functions are called within a spin_lock_irqsave on
+ * the channel instance lock, so we are not disturbed by irqs
+ *
+ * we can later easily change the interface to make  other
+ * things configurable, for now we configure the taps
+ *
+ */
+
+void
+vpm_echocan_on(struct hfc_multi *hc, int ch, int taps)
+{
+	unsigned int timeslot;
+	unsigned int unit;
+	struct bchannel *bch = hc->chan[ch].bch;
+#ifdef TXADJ
+	int txadj = -4;
+	struct sk_buff *skb;
+#endif
+	if (hc->chan[ch].protocol != ISDN_P_B_RAW)
+		return;
+
+	if (!bch)
+		return;
+
+#ifdef TXADJ
+	skb = _alloc_mISDN_skb(PH_CONTROL_IND, HFC_VOL_CHANGE_TX,
+		sizeof(int), &txadj, GFP_ATOMIC);
+	if (skb)
+		recv_Bchannel_skb(bch, skb);
+#endif
+
+	timeslot = ((ch/4)*8) + ((ch%4)*4) + 1;
+	unit = ch % 4;
+
+	printk(KERN_NOTICE "vpm_echocan_on called taps [%d] on timeslot %d\n",
+	    taps, timeslot);
+
+	vpm_out(hc, unit, timeslot, 0x7e);
+}
+
+void
+vpm_echocan_off(struct hfc_multi *hc, int ch)
+{
+	unsigned int timeslot;
+	unsigned int unit;
+	struct bchannel *bch = hc->chan[ch].bch;
+#ifdef TXADJ
+	int txadj = 0;
+	struct sk_buff *skb;
+#endif
+
+	if (hc->chan[ch].protocol != ISDN_P_B_RAW)
+		return;
+
+	if (!bch)
+		return;
+
+#ifdef TXADJ
+	skb = _alloc_mISDN_skb(PH_CONTROL_IND, HFC_VOL_CHANGE_TX,
+		sizeof(int), &txadj, GFP_ATOMIC);
+	if (skb)
+		recv_Bchannel_skb(bch, skb);
+#endif
+
+	timeslot = ((ch/4)*8) + ((ch%4)*4) + 1;
+	unit = ch % 4;
+
+	printk(KERN_NOTICE "vpm_echocan_off called on timeslot %d\n",
+	    timeslot);
+	/* FILLME */
+	vpm_out(hc, unit, timeslot, 0x01);
+}
+
+
+/*
+ * Speech Design resync feature
+ * NOTE: This is called sometimes outside interrupt handler.
+ * We must lock irqsave, so no other interrupt (other card) will occurr!
+ * Also multiple interrupts may nest, so must lock each access (lists, card)!
+ */
+static inline void
+hfcmulti_resync(struct hfc_multi *locked, struct hfc_multi *newmaster, int rm)
+{
+	struct hfc_multi *hc, *next, *pcmmaster = 0;
+	u_int *plx_acc_32, pv;
+	u_long flags;
+
+	spin_lock_irqsave(&HFClock, flags);
+	spin_lock(&plx_lock); /* must be locked inside other locks */
+
+	if (debug & DEBUG_HFCMULTI_PLXSD)
+		printk(KERN_DEBUG "%s: RESYNC(syncmaster=0x%p)\n",
+			__func__, syncmaster);
+
+	/* select new master */
+	if (newmaster) {
+		if (debug & DEBUG_HFCMULTI_PLXSD)
+			printk(KERN_DEBUG "using provided controller\n");
+	} else {
+		list_for_each_entry_safe(hc, next, &HFClist, list) {
+			if (test_bit(HFC_CHIP_PLXSD, &hc->chip)) {
+				if (hc->syncronized) {
+					newmaster = hc;
+					break;
+				}
+			}
+		}
+	}
+
+	/* Disable sync of all cards */
+	list_for_each_entry_safe(hc, next, &HFClist, list) {
+		if (test_bit(HFC_CHIP_PLXSD, &hc->chip)) {
+			plx_acc_32 = (u_int *)(hc->plx_membase+PLX_GPIOC);
+			pv = readl(plx_acc_32);
+			pv &= ~PLX_SYNC_O_EN;
+			writel(pv, plx_acc_32);
+			if (test_bit(HFC_CHIP_PCM_MASTER, &hc->chip)) {
+				pcmmaster = hc;
+				if (hc->type == 1) {
+					if (debug & DEBUG_HFCMULTI_PLXSD)
+						printk(KERN_DEBUG
+							"Schedule SYNC_I\n");
+					hc->e1_resync |= 1; /* get SYNC_I */
+				}
+			}
+		}
+	}
+
+	if (newmaster) {
+		hc = newmaster;
+		if (debug & DEBUG_HFCMULTI_PLXSD)
+			printk(KERN_DEBUG "id=%d (0x%p) = syncronized with "
+				"interface.\n", hc->id, hc);
+		/* Enable new sync master */
+		plx_acc_32 = (u_int *)(hc->plx_membase+PLX_GPIOC);
+		pv = readl(plx_acc_32);
+		pv |= PLX_SYNC_O_EN;
+		writel(pv, plx_acc_32);
+		/* switch to jatt PLL, if not disabled by RX_SYNC */
+		if (hc->type == 1 && !test_bit(HFC_CHIP_RX_SYNC, &hc->chip)) {
+			if (debug & DEBUG_HFCMULTI_PLXSD)
+				printk(KERN_DEBUG "Schedule jatt PLL\n");
+			hc->e1_resync |= 2; /* switch to jatt */
+		}
+	} else {
+		if (pcmmaster) {
+			hc = pcmmaster;
+			if (debug & DEBUG_HFCMULTI_PLXSD)
+				printk(KERN_DEBUG
+					"id=%d (0x%p) = PCM master syncronized "
+					"with QUARTZ\n", hc->id, hc);
+			if (hc->type == 1) {
+				/* Use the crystal clock for the PCM
+				   master card */
+				if (debug & DEBUG_HFCMULTI_PLXSD)
+					printk(KERN_DEBUG
+					    "Schedule QUARTZ for HFC-E1\n");
+				hc->e1_resync |= 4; /* switch quartz */
+			} else {
+				if (debug & DEBUG_HFCMULTI_PLXSD)
+					printk(KERN_DEBUG
+					    "QUARTZ is automatically "
+					    "enabled by HFC-%dS\n", hc->type);
+			}
+			plx_acc_32 = (u_int *)(hc->plx_membase+PLX_GPIOC);
+			pv = readl(plx_acc_32);
+			pv |= PLX_SYNC_O_EN;
+			writel(pv, plx_acc_32);
+		} else
+			if (!rm)
+				printk(KERN_ERR "%s no pcm master, this MUST "
+					"not happen!\n", __func__);
+	}
+	syncmaster = newmaster;
+
+	spin_unlock(&plx_lock);
+	spin_unlock_irqrestore(&HFClock, flags);
+}
+
+/* This must be called AND hc must be locked irqsave!!! */
+inline void
+plxsd_checksync(struct hfc_multi *hc, int rm)
+{
+	if (hc->syncronized) {
+		if (syncmaster == NULL) {
+			if (debug & DEBUG_HFCMULTI_PLXSD)
+				printk(KERN_WARNING "%s: GOT sync on card %d"
+					" (id=%d)\n", __func__, hc->id + 1,
+					hc->id);
+			hfcmulti_resync(hc, hc, rm);
+		}
+	} else {
+		if (syncmaster == hc) {
+			if (debug & DEBUG_HFCMULTI_PLXSD)
+				printk(KERN_WARNING "%s: LOST sync on card %d"
+					" (id=%d)\n", __func__, hc->id + 1,
+					hc->id);
+			hfcmulti_resync(hc, NULL, rm);
+		}
+	}
+}
+
+
+/*
+ * free hardware resources used by driver
+ */
+static void
+release_io_hfcmulti(struct hfc_multi *hc)
+{
+	u_int	*plx_acc_32, pv;
+	u_long	plx_flags;
+
+	if (debug & DEBUG_HFCMULTI_INIT)
+		printk(KERN_DEBUG "%s: entered\n", __func__);
+
+	/* soft reset also masks all interrupts */
+	hc->hw.r_cirm |= V_SRES;
+	HFC_outb(hc, R_CIRM, hc->hw.r_cirm);
+	udelay(1000);
+	hc->hw.r_cirm &= ~V_SRES;
+	HFC_outb(hc, R_CIRM, hc->hw.r_cirm);
+	udelay(1000); /* instead of 'wait' that may cause locking */
+
+	/* release Speech Design card, if PLX was initialized */
+	if (test_bit(HFC_CHIP_PLXSD, &hc->chip) && hc->plx_membase) {
+		if (debug & DEBUG_HFCMULTI_PLXSD)
+			printk(KERN_DEBUG "%s: release PLXSD card %d\n",
+			    __func__, hc->id + 1);
+		spin_lock_irqsave(&plx_lock, plx_flags);
+		plx_acc_32 = (u_int *)(hc->plx_membase+PLX_GPIOC);
+		writel(PLX_GPIOC_INIT, plx_acc_32);
+		pv = readl(plx_acc_32);
+		/* Termination off */
+		pv &= ~PLX_TERM_ON;
+		/* Disconnect the PCM */
+		pv |= PLX_SLAVE_EN_N;
+		pv &= ~PLX_MASTER_EN;
+		pv &= ~PLX_SYNC_O_EN;
+		/* Put the DSP in Reset */
+		pv &= ~PLX_DSP_RES_N;
+		writel(pv, plx_acc_32);
+		if (debug & DEBUG_HFCMULTI_INIT)
+			printk(KERN_WARNING "%s: PCM off: PLX_GPIO=%x\n",
+				__func__, pv);
+		spin_unlock_irqrestore(&plx_lock, plx_flags);
+	}
+
+	/* disable memory mapped ports / io ports */
+	test_and_clear_bit(HFC_CHIP_PLXSD, &hc->chip); /* prevent resync */
+	pci_write_config_word(hc->pci_dev, PCI_COMMAND, 0);
+	if (hc->pci_membase)
+		iounmap((void *)hc->pci_membase);
+	if (hc->plx_membase)
+		iounmap((void *)hc->plx_membase);
+	if (hc->pci_iobase)
+		release_region(hc->pci_iobase, 8);
+
+	if (hc->pci_dev) {
+		pci_disable_device(hc->pci_dev);
+		pci_set_drvdata(hc->pci_dev, NULL);
+	}
+	if (debug & DEBUG_HFCMULTI_INIT)
+		printk(KERN_DEBUG "%s: done\n", __func__);
+}
+
+/*
+ * function called to reset the HFC chip. A complete software reset of chip
+ * and fifos is done. All configuration of the chip is done.
+ */
+
+static int
+init_chip(struct hfc_multi *hc)
+{
+	u_long			flags, val, val2 = 0, rev;
+	int			i, err = 0;
+	u_char			r_conf_en, rval;
+	u_int			*plx_acc_32, pv;
+	u_long			plx_flags, hfc_flags;
+	int			plx_count;
+	struct hfc_multi	*pos, *next, *plx_last_hc;
+
+	spin_lock_irqsave(&hc->lock, flags);
+	/* reset all registers */
+	memset(&hc->hw, 0, sizeof(struct hfcm_hw));
+
+	/* revision check */
+	if (debug & DEBUG_HFCMULTI_INIT)
+		printk(KERN_DEBUG "%s: entered\n", __func__);
+	val = HFC_inb(hc, R_CHIP_ID)>>4;
+	if (val != 0x8 && val != 0xc && val != 0xe) {
+		printk(KERN_INFO "HFC_multi: unknown CHIP_ID:%x\n", (u_int)val);
+		err = -EIO;
+		goto out;
+	}
+	rev = HFC_inb(hc, R_CHIP_RV);
+	printk(KERN_INFO
+	    "HFC_multi: detected HFC with chip ID=0x%lx revision=%ld%s\n",
+	    val, rev, (rev == 0) ? " (old FIFO handling)" : "");
+	if (rev == 0) {
+		test_and_set_bit(HFC_CHIP_REVISION0, &hc->chip);
+		printk(KERN_WARNING
+		    "HFC_multi: NOTE: Your chip is revision 0, "
+		    "ask Cologne Chip for update. Newer chips "
+		    "have a better FIFO handling. Old chips "
+		    "still work but may have slightly lower "
+		    "HDLC transmit performance.\n");
+	}
+	if (rev > 1) {
+		printk(KERN_WARNING "HFC_multi: WARNING: This driver doesn't "
+		    "consider chip revision = %ld. The chip / "
+		    "bridge may not work.\n", rev);
+	}
+
+	/* set s-ram size */
+	hc->Flen = 0x10;
+	hc->Zmin = 0x80;
+	hc->Zlen = 384;
+	hc->DTMFbase = 0x1000;
+	if (test_bit(HFC_CHIP_EXRAM_128, &hc->chip)) {
+		if (debug & DEBUG_HFCMULTI_INIT)
+			printk(KERN_DEBUG "%s: changing to 128K extenal RAM\n",
+			    __func__);
+		hc->hw.r_ctrl |= V_EXT_RAM;
+		hc->hw.r_ram_sz = 1;
+		hc->Flen = 0x20;
+		hc->Zmin = 0xc0;
+		hc->Zlen = 1856;
+		hc->DTMFbase = 0x2000;
+	}
+	if (test_bit(HFC_CHIP_EXRAM_512, &hc->chip)) {
+		if (debug & DEBUG_HFCMULTI_INIT)
+			printk(KERN_DEBUG "%s: changing to 512K extenal RAM\n",
+			    __func__);
+		hc->hw.r_ctrl |= V_EXT_RAM;
+		hc->hw.r_ram_sz = 2;
+		hc->Flen = 0x20;
+		hc->Zmin = 0xc0;
+		hc->Zlen = 8000;
+		hc->DTMFbase = 0x2000;
+	}
+	hc->max_trans = poll << 1;
+	if (hc->max_trans > hc->Zlen)
+		hc->max_trans = hc->Zlen;
+
+	/* Speech Design PLX bridge */
+	if (test_bit(HFC_CHIP_PLXSD, &hc->chip)) {
+		if (debug & DEBUG_HFCMULTI_PLXSD)
+			printk(KERN_DEBUG "%s: initializing PLXSD card %d\n",
+			    __func__, hc->id + 1);
+		spin_lock_irqsave(&plx_lock, plx_flags);
+		plx_acc_32 = (u_int *)(hc->plx_membase+PLX_GPIOC);
+		writel(PLX_GPIOC_INIT, plx_acc_32);
+		pv = readl(plx_acc_32);
+		/* The first and the last cards are terminating the PCM bus */
+		pv |= PLX_TERM_ON; /* hc is currently the last */
+		/* Disconnect the PCM */
+		pv |= PLX_SLAVE_EN_N;
+		pv &= ~PLX_MASTER_EN;
+		pv &= ~PLX_SYNC_O_EN;
+		/* Put the DSP in Reset */
+		pv &= ~PLX_DSP_RES_N;
+		writel(pv, plx_acc_32);
+		spin_unlock_irqrestore(&plx_lock, plx_flags);
+		if (debug & DEBUG_HFCMULTI_INIT)
+			printk(KERN_WARNING "%s: slave/term: PLX_GPIO=%x\n",
+				__func__, pv);
+		/*
+		 * If we are the 3rd PLXSD card or higher, we must turn
+		 * termination of last PLXSD card off.
+		 */
+		spin_lock_irqsave(&HFClock, hfc_flags);
+		plx_count = 0;
+		plx_last_hc = NULL;
+		list_for_each_entry_safe(pos, next, &HFClist, list) {
+			if (test_bit(HFC_CHIP_PLXSD, &pos->chip)) {
+				plx_count++;
+				if (pos != hc)
+					plx_last_hc = pos;
+			}
+		}
+		if (plx_count >= 3) {
+			if (debug & DEBUG_HFCMULTI_PLXSD)
+				printk(KERN_DEBUG "%s: card %d is between, so "
+					"we disable termination\n",
+				    __func__, plx_last_hc->id + 1);
+			spin_lock_irqsave(&plx_lock, plx_flags);
+			plx_acc_32 = (u_int *)(plx_last_hc->plx_membase
+					+ PLX_GPIOC);
+			pv = readl(plx_acc_32);
+			pv &= ~PLX_TERM_ON;
+			writel(pv, plx_acc_32);
+			spin_unlock_irqrestore(&plx_lock, plx_flags);
+			if (debug & DEBUG_HFCMULTI_INIT)
+			    printk(KERN_WARNING "%s: term off: PLX_GPIO=%x\n",
+					__func__, pv);
+		}
+		spin_unlock_irqrestore(&HFClock, hfc_flags);
+		hc->hw.r_pcm_md0 = V_F0_LEN; /* shift clock for DSP */
+	}
+
+	/* we only want the real Z2 read-pointer for revision > 0 */
+	if (!test_bit(HFC_CHIP_REVISION0, &hc->chip))
+		hc->hw.r_ram_sz |= V_FZ_MD;
+
+	/* select pcm mode */
+	if (test_bit(HFC_CHIP_PCM_SLAVE, &hc->chip)) {
+		if (debug & DEBUG_HFCMULTI_INIT)
+			printk(KERN_DEBUG "%s: setting PCM into slave mode\n",
+			    __func__);
+	} else
+	if (test_bit(HFC_CHIP_PCM_MASTER, &hc->chip) && !plxsd_master) {
+		if (debug & DEBUG_HFCMULTI_INIT)
+			printk(KERN_DEBUG "%s: setting PCM into master mode\n",
+			    __func__);
+		hc->hw.r_pcm_md0 |= V_PCM_MD;
+	} else {
+		if (debug & DEBUG_HFCMULTI_INIT)
+			printk(KERN_DEBUG "%s: performing PCM auto detect\n",
+			    __func__);
+	}
+
+	/* soft reset */
+	HFC_outb(hc, R_CTRL, hc->hw.r_ctrl);
+	HFC_outb(hc, R_RAM_SZ, hc->hw.r_ram_sz);
+	HFC_outb(hc, R_FIFO_MD, 0);
+	hc->hw.r_cirm = V_SRES | V_HFCRES | V_PCMRES | V_STRES | V_RLD_EPR;
+	HFC_outb(hc, R_CIRM, hc->hw.r_cirm);
+	udelay(100);
+	hc->hw.r_cirm = 0;
+	HFC_outb(hc, R_CIRM, hc->hw.r_cirm);
+	udelay(100);
+	HFC_outb(hc, R_RAM_SZ, hc->hw.r_ram_sz);
+
+	/* Speech Design PLX bridge pcm and sync mode */
+	if (test_bit(HFC_CHIP_PLXSD, &hc->chip)) {
+		spin_lock_irqsave(&plx_lock, plx_flags);
+		plx_acc_32 = (u_int *)(hc->plx_membase+PLX_GPIOC);
+		pv = readl(plx_acc_32);
+		/* Connect PCM */
+		if (hc->hw.r_pcm_md0 & V_PCM_MD) {
+			pv |= PLX_MASTER_EN | PLX_SLAVE_EN_N;
+			pv |= PLX_SYNC_O_EN;
+			if (debug & DEBUG_HFCMULTI_INIT)
+				printk(KERN_WARNING "%s: master: PLX_GPIO=%x\n",
+					__func__, pv);
+		} else {
+			pv &= ~(PLX_MASTER_EN | PLX_SLAVE_EN_N);
+			pv &= ~PLX_SYNC_O_EN;
+			if (debug & DEBUG_HFCMULTI_INIT)
+				printk(KERN_WARNING "%s: slave: PLX_GPIO=%x\n",
+					__func__, pv);
+		}
+		writel(pv, plx_acc_32);
+		spin_unlock_irqrestore(&plx_lock, plx_flags);
+	}
+
+	/* PCM setup */
+	HFC_outb(hc, R_PCM_MD0, hc->hw.r_pcm_md0 | 0x90);
+	if (hc->slots == 32)
+		HFC_outb(hc, R_PCM_MD1, 0x00);
+	if (hc->slots == 64)
+		HFC_outb(hc, R_PCM_MD1, 0x10);
+	if (hc->slots == 128)
+		HFC_outb(hc, R_PCM_MD1, 0x20);
+	HFC_outb(hc, R_PCM_MD0, hc->hw.r_pcm_md0 | 0xa0);
+	if (test_bit(HFC_CHIP_PLXSD, &hc->chip))
+		HFC_outb(hc, R_PCM_MD2, V_SYNC_SRC); /* sync via SYNC_I / O */
+	else
+		HFC_outb(hc, R_PCM_MD2, 0x00); /* sync from interface */
+	HFC_outb(hc, R_PCM_MD0, hc->hw.r_pcm_md0 | 0x00);
+	for (i = 0; i < 256; i++) {
+		HFC_outb_nodebug(hc, R_SLOT, i);
+		HFC_outb_nodebug(hc, A_SL_CFG, 0);
+		HFC_outb_nodebug(hc, A_CONF, 0);
+		hc->slot_owner[i] = -1;
+	}
+
+	/* set clock speed */
+	if (test_bit(HFC_CHIP_CLOCK2, &hc->chip)) {
+		if (debug & DEBUG_HFCMULTI_INIT)
+			printk(KERN_DEBUG
+			    "%s: setting double clock\n", __func__);
+		HFC_outb(hc, R_BRG_PCM_CFG, V_PCM_CLK);
+	}
+
+	/* B410P GPIO */
+	if (test_bit(HFC_CHIP_B410P, &hc->chip)) {
+		printk(KERN_NOTICE "Setting GPIOs\n");
+		HFC_outb(hc, R_GPIO_SEL, 0x30);
+		HFC_outb(hc, R_GPIO_EN1, 0x3);
+		udelay(1000);
+		printk(KERN_NOTICE "calling vpm_init\n");
+		vpm_init(hc);
+	}
+
+	/* check if R_F0_CNT counts (8 kHz frame count) */
+	val = HFC_inb(hc, R_F0_CNTL);
+	val += HFC_inb(hc, R_F0_CNTH) << 8;
+	if (debug & DEBUG_HFCMULTI_INIT)
+		printk(KERN_DEBUG
+		    "HFC_multi F0_CNT %ld after reset\n", val);
+	spin_unlock_irqrestore(&hc->lock, flags);
+	set_current_state(TASK_UNINTERRUPTIBLE);
+	schedule_timeout((HZ/100)?:1); /* Timeout minimum 10ms */
+	spin_lock_irqsave(&hc->lock, flags);
+	val2 = HFC_inb(hc, R_F0_CNTL);
+	val2 += HFC_inb(hc, R_F0_CNTH) << 8;
+	if (debug & DEBUG_HFCMULTI_INIT)
+		printk(KERN_DEBUG
+			"HFC_multi F0_CNT %ld after 10 ms (1st try)\n",
+		    val2);
+	if (val2 >= val+8) { /* 1 ms */
+		/* it counts, so we keep the pcm mode */
+		if (test_bit(HFC_CHIP_PCM_MASTER, &hc->chip))
+			printk(KERN_INFO "controller is PCM bus MASTER\n");
+		else
+		if (test_bit(HFC_CHIP_PCM_SLAVE, &hc->chip))
+			printk(KERN_INFO "controller is PCM bus SLAVE\n");
+		else {
+			test_and_set_bit(HFC_CHIP_PCM_SLAVE, &hc->chip);
+			printk(KERN_INFO "controller is PCM bus SLAVE "
+				"(auto detected)\n");
+		}
+	} else {
+		/* does not count */
+		if (test_bit(HFC_CHIP_PCM_MASTER, &hc->chip)) {
+controller_fail:
+			printk(KERN_ERR "HFC_multi ERROR, getting no 125us "
+			    "pulse. Seems that controller fails.\n");
+			err = -EIO;
+			goto out;
+		}
+		if (test_bit(HFC_CHIP_PCM_SLAVE, &hc->chip)) {
+			printk(KERN_INFO "controller is PCM bus SLAVE "
+				"(ignoring missing PCM clock)\n");
+		} else {
+			/* only one pcm master */
+			if (test_bit(HFC_CHIP_PLXSD, &hc->chip)
+				&& plxsd_master) {
+				printk(KERN_ERR "HFC_multi ERROR, no clock "
+				    "on another Speech Design card found. "
+				    "Please be sure to connect PCM cable.\n");
+				err = -EIO;
+				goto out;
+			}
+			/* retry with master clock */
+			if (test_bit(HFC_CHIP_PLXSD, &hc->chip)) {
+				spin_lock_irqsave(&plx_lock, plx_flags);
+				plx_acc_32 = (u_int *)(hc->plx_membase +
+					PLX_GPIOC);
+				pv = readl(plx_acc_32);
+				pv |= PLX_MASTER_EN | PLX_SLAVE_EN_N;
+				pv |= PLX_SYNC_O_EN;
+				writel(pv, plx_acc_32);
+				spin_unlock_irqrestore(&plx_lock, plx_flags);
+				if (debug & DEBUG_HFCMULTI_INIT)
+				    printk(KERN_WARNING "%s: master: PLX_GPIO"
+					"=%x\n", __func__, pv);
+			}
+			hc->hw.r_pcm_md0 |= V_PCM_MD;
+			HFC_outb(hc, R_PCM_MD0, hc->hw.r_pcm_md0 | 0x00);
+			spin_unlock_irqrestore(&hc->lock, flags);
+			set_current_state(TASK_UNINTERRUPTIBLE);
+			schedule_timeout((HZ/100)?:1); /* Timeout min. 10ms */
+			spin_lock_irqsave(&hc->lock, flags);
+			val2 = HFC_inb(hc, R_F0_CNTL);
+			val2 += HFC_inb(hc, R_F0_CNTH) << 8;
+			if (debug & DEBUG_HFCMULTI_INIT)
+				printk(KERN_DEBUG "HFC_multi F0_CNT %ld after "
+					"10 ms (2nd try)\n", val2);
+			if (val2 >= val+8) { /* 1 ms */
+				test_and_set_bit(HFC_CHIP_PCM_MASTER,
+					&hc->chip);
+				printk(KERN_INFO "controller is PCM bus MASTER "
+					"(auto detected)\n");
+			} else
+				goto controller_fail;
+		}
+	}
+
+	/* Release the DSP Reset */
+	if (test_bit(HFC_CHIP_PLXSD, &hc->chip)) {
+		if (test_bit(HFC_CHIP_PCM_MASTER, &hc->chip))
+			plxsd_master = 1;
+		spin_lock_irqsave(&plx_lock, plx_flags);
+		plx_acc_32 = (u_int *)(hc->plx_membase+PLX_GPIOC);
+		pv = readl(plx_acc_32);
+		pv |=  PLX_DSP_RES_N;
+		writel(pv, plx_acc_32);
+		spin_unlock_irqrestore(&plx_lock, plx_flags);
+		if (debug & DEBUG_HFCMULTI_INIT)
+			printk(KERN_WARNING "%s: reset off: PLX_GPIO=%x\n",
+				__func__, pv);
+	}
+
+	/* pcm id */
+	if (hc->pcm)
+		printk(KERN_INFO "controller has given PCM BUS ID %d\n",
+			hc->pcm);
+	else {
+		if (test_bit(HFC_CHIP_PCM_MASTER, &hc->chip)
+		 || test_bit(HFC_CHIP_PLXSD, &hc->chip)) {
+			PCM_cnt++; /* SD has proprietary bridging */
+		}
+		hc->pcm = PCM_cnt;
+		printk(KERN_INFO "controller has PCM BUS ID %d "
+			"(auto selected)\n", hc->pcm);
+	}
+
+	/* set up timer */
+	HFC_outb(hc, R_TI_WD, poll_timer);
+	hc->hw.r_irqmsk_misc |= V_TI_IRQMSK;
+
+	/*
+	 * set up 125us interrupt, only if function pointer is available
+	 * and module parameter timer is set
+	 */
+	if (timer && hfc_interrupt && register_interrupt) {
+		/* only one chip should use this interrupt */
+		timer = 0;
+		interrupt_registered = 1;
+		hc->hw.r_irqmsk_misc |= V_PROC_IRQMSK;
+		/* deactivate other interrupts in ztdummy */
+		register_interrupt();
+	}
+
+	/* set E1 state machine IRQ */
+	if (hc->type == 1)
+		hc->hw.r_irqmsk_misc |= V_STA_IRQMSK;
+
+	/* set DTMF detection */
+	if (test_bit(HFC_CHIP_DTMF, &hc->chip)) {
+		if (debug & DEBUG_HFCMULTI_INIT)
+			printk(KERN_DEBUG "%s: enabling DTMF detection "
+			    "for all B-channel\n", __func__);
+		hc->hw.r_dtmf = V_DTMF_EN | V_DTMF_STOP;
+		if (test_bit(HFC_CHIP_ULAW, &hc->chip))
+			hc->hw.r_dtmf |= V_ULAW_SEL;
+		HFC_outb(hc, R_DTMF_N, 102 - 1);
+		hc->hw.r_irqmsk_misc |= V_DTMF_IRQMSK;
+	}
+
+	/* conference engine */
+	if (test_bit(HFC_CHIP_ULAW, &hc->chip))
+		r_conf_en = V_CONF_EN | V_ULAW;
+	else
+		r_conf_en = V_CONF_EN;
+	HFC_outb(hc, R_CONF_EN, r_conf_en);
+
+	/* setting leds */
+	switch (hc->leds) {
+	case 1: /* HFC-E1 OEM */
+		if (test_bit(HFC_CHIP_WATCHDOG, &hc->chip))
+			HFC_outb(hc, R_GPIO_SEL, 0x32);
+		else
+			HFC_outb(hc, R_GPIO_SEL, 0x30);
+
+		HFC_outb(hc, R_GPIO_EN1, 0x0f);
+		HFC_outb(hc, R_GPIO_OUT1, 0x00);
+
+		HFC_outb(hc, R_GPIO_EN0, V_GPIO_EN2 | V_GPIO_EN3);
+		break;
+
+	case 2: /* HFC-4S OEM */
+	case 3:
+		HFC_outb(hc, R_GPIO_SEL, 0xf0);
+		HFC_outb(hc, R_GPIO_EN1, 0xff);
+		HFC_outb(hc, R_GPIO_OUT1, 0x00);
+		break;
+	}
+
+	/* set master clock */
+	if (hc->masterclk >= 0) {
+		if (debug & DEBUG_HFCMULTI_INIT)
+			printk(KERN_DEBUG "%s: setting ST master clock "
+			    "to port %d (0..%d)\n",
+			    __func__, hc->masterclk, hc->ports-1);
+		hc->hw.r_st_sync = hc->masterclk | V_AUTO_SYNC;
+		HFC_outb(hc, R_ST_SYNC, hc->hw.r_st_sync);
+	}
+
+	/* setting misc irq */
+	HFC_outb(hc, R_IRQMSK_MISC, hc->hw.r_irqmsk_misc);
+	if (debug & DEBUG_HFCMULTI_INIT)
+		printk(KERN_DEBUG "r_irqmsk_misc.2: 0x%x\n",
+		    hc->hw.r_irqmsk_misc);
+
+	/* RAM access test */
+	HFC_outb(hc, R_RAM_ADDR0, 0);
+	HFC_outb(hc, R_RAM_ADDR1, 0);
+	HFC_outb(hc, R_RAM_ADDR2, 0);
+	for (i = 0; i < 256; i++) {
+		HFC_outb_nodebug(hc, R_RAM_ADDR0, i);
+		HFC_outb_nodebug(hc, R_RAM_DATA, ((i*3)&0xff));
+	}
+	for (i = 0; i < 256; i++) {
+		HFC_outb_nodebug(hc, R_RAM_ADDR0, i);
+		HFC_inb_nodebug(hc, R_RAM_DATA);
+		rval = HFC_inb_nodebug(hc, R_INT_DATA);
+		if (rval != ((i * 3) & 0xff)) {
+			printk(KERN_DEBUG
+			    "addr:%x val:%x should:%x\n", i, rval,
+			    (i * 3) & 0xff);
+			err++;
+		}
+	}
+	if (err) {
+		printk(KERN_DEBUG "aborting - %d RAM access errors\n", err);
+		err = -EIO;
+		goto out;
+	}
+
+	if (debug & DEBUG_HFCMULTI_INIT)
+		printk(KERN_DEBUG "%s: done\n", __func__);
+out:
+	spin_unlock_irqrestore(&hc->lock, flags);
+	return err;
+}
+
+
+/*
+ * control the watchdog
+ */
+static void
+hfcmulti_watchdog(struct hfc_multi *hc)
+{
+	hc->wdcount++;
+
+	if (hc->wdcount > 10) {
+		hc->wdcount = 0;
+		hc->wdbyte = hc->wdbyte == V_GPIO_OUT2 ?
+		    V_GPIO_OUT3 : V_GPIO_OUT2;
+
+	/* printk("Sending Watchdog Kill %x\n",hc->wdbyte); */
+		HFC_outb(hc, R_GPIO_EN0, V_GPIO_EN2 | V_GPIO_EN3);
+		HFC_outb(hc, R_GPIO_OUT0, hc->wdbyte);
+	}
+}
+
+
+
+/*
+ * output leds
+ */
+static void
+hfcmulti_leds(struct hfc_multi *hc)
+{
+	unsigned long lled;
+	unsigned long leddw;
+	int i, state, active, leds;
+	struct dchannel *dch;
+	int led[4];
+
+	hc->ledcount += poll;
+	if (hc->ledcount > 4096) {
+		hc->ledcount -= 4096;
+		hc->ledstate = 0xAFFEAFFE;
+	}
+
+	switch (hc->leds) {
+	case 1: /* HFC-E1 OEM */
+		/* 2 red blinking: NT mode deactivate
+		 * 2 red steady:   TE mode deactivate
+		 * left green:     L1 active
+		 * left red:       frame sync, but no L1
+		 * right green:    L2 active
+		 */
+		if (hc->chan[hc->dslot].sync != 2) { /* no frame sync */
+			if (hc->chan[hc->dslot].dch->dev.D.protocol
+				!= ISDN_P_NT_E1) {
+				led[0] = 1;
+				led[1] = 1;
+			} else if (hc->ledcount>>11) {
+				led[0] = 1;
+				led[1] = 1;
+			} else {
+				led[0] = 0;
+				led[1] = 0;
+			}
+			led[2] = 0;
+			led[3] = 0;
+		} else { /* with frame sync */
+			/* TODO make it work */
+			led[0] = 0;
+			led[1] = 0;
+			led[2] = 0;
+			led[3] = 1;
+		}
+		leds = (led[0] | (led[1]<<2) | (led[2]<<1) | (led[3]<<3))^0xF;
+			/* leds are inverted */
+		if (leds != (int)hc->ledstate) {
+			HFC_outb_nodebug(hc, R_GPIO_OUT1, leds);
+			hc->ledstate = leds;
+		}
+		break;
+
+	case 2: /* HFC-4S OEM */
+		/* red blinking = PH_DEACTIVATE NT Mode
+		 * red steady   = PH_DEACTIVATE TE Mode
+		 * green steady = PH_ACTIVATE
+		 */
+		for (i = 0; i < 4; i++) {
+			state = 0;
+			active = -1;
+			dch = hc->chan[(i << 2) | 2].dch;
+			if (dch) {
+				state = dch->state;
+				if (dch->dev.D.protocol == ISDN_P_NT_S0)
+					active = 3;
+				else
+					active = 7;
+			}
+			if (state) {
+				if (state == active) {
+					led[i] = 1; /* led green */
+				} else
+					if (dch->dev.D.protocol == ISDN_P_TE_S0)
+						/* TE mode: led red */
+						led[i] = 2;
+					else
+						if (hc->ledcount>>11)
+							/* led red */
+							led[i] = 2;
+						else
+							/* led off */
+							led[i] = 0;
+			} else
+				led[i] = 0; /* led off */
+		}
+		if (test_bit(HFC_CHIP_B410P, &hc->chip)) {
+			leds = 0;
+			for (i = 0; i < 4; i++) {
+				if (led[i] == 1) {
+					/*green*/
+					leds |= (0x2 << (i * 2));
+				} else if (led[i] == 2) {
+					/*red*/
+					leds |= (0x1 << (i * 2));
+				}
+			}
+			if (leds != (int)hc->ledstate) {
+				vpm_out(hc, 0, 0x1a8 + 3, leds);
+				hc->ledstate = leds;
+			}
+		} else {
+			leds = ((led[3] > 0) << 0) | ((led[1] > 0) << 1) |
+			    ((led[0] > 0) << 2) | ((led[2] > 0) << 3) |
+			    ((led[3] & 1) << 4) | ((led[1] & 1) << 5) |
+			    ((led[0] & 1) << 6) | ((led[2] & 1) << 7);
+			if (leds != (int)hc->ledstate) {
+				HFC_outb_nodebug(hc, R_GPIO_EN1, leds & 0x0F);
+				HFC_outb_nodebug(hc, R_GPIO_OUT1, leds >> 4);
+				hc->ledstate = leds;
+			}
+		}
+		break;
+
+	case 3: /* HFC 1S/2S Beronet */
+		/* red blinking = PH_DEACTIVATE NT Mode
+		 * red steady   = PH_DEACTIVATE TE Mode
+		 * green steady = PH_ACTIVATE
+		 */
+		for (i = 0; i < 2; i++) {
+			state = 0;
+			active = -1;
+			dch = hc->chan[(i << 2) | 2].dch;
+			if (dch) {
+				state = dch->state;
+				if (dch->dev.D.protocol == ISDN_P_NT_S0)
+					active = 3;
+				else
+					active = 7;
+			}
+			if (state) {
+				if (state == active) {
+					led[i] = 1; /* led green */
+				} else
+					if (dch->dev.D.protocol == ISDN_P_TE_S0)
+						/* TE mode: led red */
+						led[i] = 2;
+					else
+						if (hc->ledcount >> 11)
+							/* led red */
+							led[i] = 2;
+						else
+							/* led off */
+							led[i] = 0;
+			} else
+				led[i] = 0; /* led off */
+		}
+
+
+		leds = (led[0] > 0) | ((led[1] > 0)<<1) | ((led[0]&1)<<2)
+			| ((led[1]&1)<<3);
+		if (leds != (int)hc->ledstate) {
+			HFC_outb_nodebug(hc, R_GPIO_EN1,
+			    ((led[0] > 0) << 2) | ((led[1] > 0) << 3));
+			HFC_outb_nodebug(hc, R_GPIO_OUT1,
+			    ((led[0] & 1) << 2) | ((led[1] & 1) << 3));
+			hc->ledstate = leds;
+		}
+		break;
+	case 8: /* HFC 8S+ Beronet */
+		lled = 0;
+
+		for (i = 0; i < 8; i++) {
+			state = 0;
+			active = -1;
+			dch = hc->chan[(i << 2) | 2].dch;
+			if (dch) {
+				state = dch->state;
+				if (dch->dev.D.protocol == ISDN_P_NT_S0)
+					active = 3;
+				else
+					active = 7;
+			}
+			if (state) {
+				if (state == active) {
+					lled |= 0 << i;
+				} else
+					if (hc->ledcount >> 11)
+						lled |= 0 << i;
+					else
+						lled |= 1 << i;
+			} else
+				lled |= 1 << i;
+		}
+		leddw = lled << 24 | lled << 16 | lled << 8 | lled;
+		if (leddw != hc->ledstate) {
+			/* HFC_outb(hc, R_BRG_PCM_CFG, 1);
+			HFC_outb(c, R_BRG_PCM_CFG, (0x0 << 6) | 0x3); */
+			/* was _io before */
+			HFC_outb_nodebug(hc, R_BRG_PCM_CFG, 1 | V_PCM_CLK);
+			outw(0x4000, hc->pci_iobase + 4);
+			outl(leddw, hc->pci_iobase);
+			HFC_outb_nodebug(hc, R_BRG_PCM_CFG, V_PCM_CLK);
+			hc->ledstate = leddw;
+		}
+		break;
+	}
+}
+/*
+ * read dtmf coefficients
+ */
+
+static void
+hfcmulti_dtmf(struct hfc_multi *hc)
+{
+	s32		*coeff;
+	u_int		mantissa;
+	int		co, ch;
+	struct bchannel	*bch = NULL;
+	u8		exponent;
+	int		dtmf = 0;
+	int		addr;
+	u16		w_float;
+	struct sk_buff	*skb;
+	struct mISDNhead *hh;
+
+	if (debug & DEBUG_HFCMULTI_DTMF)
+		printk(KERN_DEBUG "%s: dtmf detection irq\n", __func__);
+	for (ch = 0; ch <= 31; ch++) {
+		/* only process enabled B-channels */
+		bch = hc->chan[ch].bch;
+		if (!bch)
+			continue;
+		if (!hc->created[hc->chan[ch].port])
+			continue;
+		if (!test_bit(FLG_TRANSPARENT, &bch->Flags))
+			continue;
+		if (debug & DEBUG_HFCMULTI_DTMF)
+			printk(KERN_DEBUG "%s: dtmf channel %d:",
+				__func__, ch);
+		coeff = &(hc->chan[ch].coeff[hc->chan[ch].coeff_count * 16]);
+		dtmf = 1;
+		for (co = 0; co < 8; co++) {
+			/* read W(n-1) coefficient */
+			addr = hc->DTMFbase + ((co<<7) | (ch<<2));
+			HFC_outb_nodebug(hc, R_RAM_ADDR0, addr);
+			HFC_outb_nodebug(hc, R_RAM_ADDR1, addr>>8);
+			HFC_outb_nodebug(hc, R_RAM_ADDR2, (addr>>16)
+				| V_ADDR_INC);
+			w_float = HFC_inb_nodebug(hc, R_RAM_DATA);
+			w_float |= (HFC_inb_nodebug(hc, R_RAM_DATA) << 8);
+			if (debug & DEBUG_HFCMULTI_DTMF)
+				printk(" %04x", w_float);
+
+			/* decode float (see chip doc) */
+			mantissa = w_float & 0x0fff;
+			if (w_float & 0x8000)
+				mantissa |= 0xfffff000;
+			exponent = (w_float>>12) & 0x7;
+			if (exponent) {
+				mantissa ^= 0x1000;
+				mantissa <<= (exponent-1);
+			}
+
+			/* store coefficient */
+			coeff[co<<1] = mantissa;
+
+			/* read W(n) coefficient */
+			w_float = HFC_inb_nodebug(hc, R_RAM_DATA);
+			w_float |= (HFC_inb_nodebug(hc, R_RAM_DATA) << 8);
+			if (debug & DEBUG_HFCMULTI_DTMF)
+				printk(" %04x", w_float);
+
+			/* decode float (see chip doc) */
+			mantissa = w_float & 0x0fff;
+			if (w_float & 0x8000)
+				mantissa |= 0xfffff000;
+			exponent = (w_float>>12) & 0x7;
+			if (exponent) {
+				mantissa ^= 0x1000;
+				mantissa <<= (exponent-1);
+			}
+
+			/* store coefficient */
+			coeff[(co<<1)|1] = mantissa;
+		}
+		if (debug & DEBUG_HFCMULTI_DTMF)
+			printk("%s: DTMF ready %08x %08x %08x %08x "
+			    "%08x %08x %08x %08x\n", __func__,
+			    coeff[0], coeff[1], coeff[2], coeff[3],
+			    coeff[4], coeff[5], coeff[6], coeff[7]);
+		hc->chan[ch].coeff_count++;
+		if (hc->chan[ch].coeff_count == 8) {
+			hc->chan[ch].coeff_count = 0;
+			skb = mI_alloc_skb(512, GFP_ATOMIC);
+			if (!skb) {
+				printk(KERN_WARNING "%s: No memory for skb\n",
+				    __func__);
+				continue;
+			}
+			hh = mISDN_HEAD_P(skb);
+			hh->prim = PH_CONTROL_IND;
+			hh->id = DTMF_HFC_COEF;
+			memcpy(skb_put(skb, 512), hc->chan[ch].coeff, 512);
+			recv_Bchannel_skb(bch, skb);
+		}
+	}
+
+	/* restart DTMF processing */
+	hc->dtmf = dtmf;
+	if (dtmf)
+		HFC_outb_nodebug(hc, R_DTMF, hc->hw.r_dtmf | V_RST_DTMF);
+}
+
+
+/*
+ * fill fifo as much as possible
+ */
+
+static void
+hfcmulti_tx(struct hfc_multi *hc, int ch)
+{
+	int i, ii, temp, len = 0;
+	int Zspace, z1, z2; /* must be int for calculation */
+	int Fspace, f1, f2;
+	u_char *d;
+	int *txpending, slot_tx;
+	struct	bchannel *bch;
+	struct  dchannel *dch;
+	struct  sk_buff **sp = NULL;
+	int *idxp;
+
+	bch = hc->chan[ch].bch;
+	dch = hc->chan[ch].dch;
+	if ((!dch) && (!bch))
+		return;
+
+	txpending = &hc->chan[ch].txpending;
+	slot_tx = hc->chan[ch].slot_tx;
+	if (dch) {
+		if (!test_bit(FLG_ACTIVE, &dch->Flags))
+			return;
+		sp = &dch->tx_skb;
+		idxp = &dch->tx_idx;
+	} else {
+		if (!test_bit(FLG_ACTIVE, &bch->Flags))
+			return;
+		sp = &bch->tx_skb;
+		idxp = &bch->tx_idx;
+	}
+	if (*sp)
+		len = (*sp)->len;
+
+	if ((!len) && *txpending != 1)
+		return; /* no data */
+
+	if (test_bit(HFC_CHIP_B410P, &hc->chip) &&
+	    (hc->chan[ch].protocol == ISDN_P_B_RAW) &&
+	    (hc->chan[ch].slot_rx < 0) &&
+	    (hc->chan[ch].slot_tx < 0))
+		HFC_outb_nodebug(hc, R_FIFO, 0x20 | (ch << 1));
+	else
+		HFC_outb_nodebug(hc, R_FIFO, ch << 1);
+	HFC_wait_nodebug(hc);
+
+	if (*txpending == 2) {
+		/* reset fifo */
+		HFC_outb_nodebug(hc, R_INC_RES_FIFO, V_RES_F);
+		HFC_wait_nodebug(hc);
+		HFC_outb(hc, A_SUBCH_CFG, 0);
+		*txpending = 1;
+	}
+next_frame:
+	if (dch || test_bit(FLG_HDLC, &bch->Flags)) {
+		f1 = HFC_inb_nodebug(hc, A_F1);
+		f2 = HFC_inb_nodebug(hc, A_F2);
+		while (f2 != (temp = HFC_inb_nodebug(hc, A_F2))) {
+			if (debug & DEBUG_HFCMULTI_FIFO)
+				printk(KERN_DEBUG
+				    "%s(card %d): reread f2 because %d!=%d\n",
+				    __func__, hc->id + 1, temp, f2);
+			f2 = temp; /* repeat until F2 is equal */
+		}
+		Fspace = f2 - f1 - 1;
+		if (Fspace < 0)
+			Fspace += hc->Flen;
+		/*
+		 * Old FIFO handling doesn't give us the current Z2 read
+		 * pointer, so we cannot send the next frame before the fifo
+		 * is empty. It makes no difference except for a slightly
+		 * lower performance.
+		 */
+		if (test_bit(HFC_CHIP_REVISION0, &hc->chip)) {
+			if (f1 != f2)
+				Fspace = 0;
+			else
+				Fspace = 1;
+		}
+		/* one frame only for ST D-channels, to allow resending */
+		if (hc->type != 1 && dch) {
+			if (f1 != f2)
+				Fspace = 0;
+		}
+		/* F-counter full condition */
+		if (Fspace == 0)
+			return;
+	}
+	z1 = HFC_inw_nodebug(hc, A_Z1) - hc->Zmin;
+	z2 = HFC_inw_nodebug(hc, A_Z2) - hc->Zmin;
+	while (z2 != (temp = (HFC_inw_nodebug(hc, A_Z2) - hc->Zmin))) {
+		if (debug & DEBUG_HFCMULTI_FIFO)
+			printk(KERN_DEBUG "%s(card %d): reread z2 because "
+				"%d!=%d\n", __func__, hc->id + 1, temp, z2);
+		z2 = temp; /* repeat unti Z2 is equal */
+	}
+	Zspace = z2 - z1;
+	if (Zspace <= 0)
+		Zspace += hc->Zlen;
+	Zspace -= 4; /* keep not too full, so pointers will not overrun */
+	/* fill transparent data only to maxinum transparent load (minus 4) */
+	if (bch && test_bit(FLG_TRANSPARENT, &bch->Flags))
+		Zspace = Zspace - hc->Zlen + hc->max_trans;
+	if (Zspace <= 0) /* no space of 4 bytes */
+		return;
+
+	/* if no data */
+	if (!len) {
+		if (z1 == z2) { /* empty */
+			/* if done with FIFO audio data during PCM connection */
+			if (bch && (!test_bit(FLG_HDLC, &bch->Flags)) &&
+			    *txpending && slot_tx >= 0) {
+				if (debug & DEBUG_HFCMULTI_MODE)
+					printk(KERN_DEBUG
+					    "%s: reconnecting PCM due to no "
+					    "more FIFO data: channel %d "
+					    "slot_tx %d\n",
+					    __func__, ch, slot_tx);
+				/* connect slot */
+				HFC_outb(hc, A_CON_HDLC, 0xc0 | 0x00 |
+				    V_HDLC_TRP | V_IFF);
+				HFC_outb_nodebug(hc, R_FIFO, ch<<1 | 1);
+				HFC_wait_nodebug(hc);
+				HFC_outb(hc, A_CON_HDLC, 0xc0 | 0x00 |
+				    V_HDLC_TRP | V_IFF);
+				HFC_outb_nodebug(hc, R_FIFO, ch<<1);
+				HFC_wait_nodebug(hc);
+			}
+			*txpending = 0;
+		}
+		return; /* no data */
+	}
+
+	/* if audio data and connected slot */
+	if (bch && (!test_bit(FLG_HDLC, &bch->Flags)) && (!*txpending)
+		&& slot_tx >= 0) {
+		if (debug & DEBUG_HFCMULTI_MODE)
+			printk(KERN_DEBUG "%s: disconnecting PCM due to "
+			    "FIFO data: channel %d slot_tx %d\n",
+			    __func__, ch, slot_tx);
+		/* disconnect slot */
+		HFC_outb(hc, A_CON_HDLC, 0x80 | 0x00 | V_HDLC_TRP | V_IFF);
+		HFC_outb_nodebug(hc, R_FIFO, ch<<1 | 1);
+		HFC_wait_nodebug(hc);
+		HFC_outb(hc, A_CON_HDLC, 0x80 | 0x00 | V_HDLC_TRP | V_IFF);
+		HFC_outb_nodebug(hc, R_FIFO, ch<<1);
+		HFC_wait_nodebug(hc);
+	}
+	*txpending = 1;
+
+	/* show activity */
+	hc->activity[hc->chan[ch].port] = 1;
+
+	/* fill fifo to what we have left */
+	ii = len;
+	if (dch || test_bit(FLG_HDLC, &bch->Flags))
+		temp = 1;
+	else
+		temp = 0;
+	i = *idxp;
+	d = (*sp)->data + i;
+	if (ii - i > Zspace)
+		ii = Zspace + i;
+	if (debug & DEBUG_HFCMULTI_FIFO)
+		printk(KERN_DEBUG "%s(card %d): fifo(%d) has %d bytes space "
+		    "left (z1=%04x, z2=%04x) sending %d of %d bytes %s\n",
+			__func__, hc->id + 1, ch, Zspace, z1, z2, ii-i, len-i,
+			temp ? "HDLC":"TRANS");
+
+
+	/* Have to prep the audio data */
+	hc->write_fifo(hc, d, ii - i);
+	*idxp = ii;
+
+	/* if not all data has been written */
+	if (ii != len) {
+		/* NOTE: fifo is started by the calling function */
+		return;
+	}
+
+	/* if all data has been written, terminate frame */
+	if (dch || test_bit(FLG_HDLC, &bch->Flags)) {
+		/* increment f-counter */
+		HFC_outb_nodebug(hc, R_INC_RES_FIFO, V_INC_F);
+		HFC_wait_nodebug(hc);
+	}
+
+	/* send confirm, since get_net_bframe will not do it with trans */
+	if (bch && test_bit(FLG_TRANSPARENT, &bch->Flags))
+		confirm_Bsend(bch);
+
+	/* check for next frame */
+	dev_kfree_skb(*sp);
+	if (bch && get_next_bframe(bch)) { /* hdlc is confirmed here */
+		len = (*sp)->len;
+		goto next_frame;
+	}
+	if (dch && get_next_dframe(dch)) {
+		len = (*sp)->len;
+		goto next_frame;
+	}
+
+	/*
+	 * now we have no more data, so in case of transparent,
+	 * we set the last byte in fifo to 'silence' in case we will get
+	 * no more data at all. this prevents sending an undefined value.
+	 */
+	if (bch && test_bit(FLG_TRANSPARENT, &bch->Flags))
+		HFC_outb_nodebug(hc, A_FIFO_DATA0_NOINC, silence);
+}
+
+
+/* NOTE: only called if E1 card is in active state */
+static void
+hfcmulti_rx(struct hfc_multi *hc, int ch)
+{
+	int temp;
+	int Zsize, z1, z2 = 0; /* = 0, to make GCC happy */
+	int f1 = 0, f2 = 0; /* = 0, to make GCC happy */
+	int again = 0;
+	struct	bchannel *bch;
+	struct  dchannel *dch;
+	struct sk_buff	*skb, **sp = NULL;
+	int	maxlen;
+
+	bch = hc->chan[ch].bch;
+	dch = hc->chan[ch].dch;
+	if ((!dch) && (!bch))
+		return;
+	if (dch) {
+		if (!test_bit(FLG_ACTIVE, &dch->Flags))
+			return;
+		sp = &dch->rx_skb;
+		maxlen = dch->maxlen;
+	} else {
+		if (!test_bit(FLG_ACTIVE, &bch->Flags))
+			return;
+		sp = &bch->rx_skb;
+		maxlen = bch->maxlen;
+	}
+next_frame:
+	/* on first AND before getting next valid frame, R_FIFO must be written
+	   to. */
+	if (test_bit(HFC_CHIP_B410P, &hc->chip) &&
+	    (hc->chan[ch].protocol == ISDN_P_B_RAW) &&
+	    (hc->chan[ch].slot_rx < 0) &&
+	    (hc->chan[ch].slot_tx < 0))
+		HFC_outb_nodebug(hc, R_FIFO, 0x20 | (ch<<1) | 1);
+	else
+		HFC_outb_nodebug(hc, R_FIFO, (ch<<1)|1);
+	HFC_wait_nodebug(hc);
+
+	/* ignore if rx is off BUT change fifo (above) to start pending TX */
+	if (hc->chan[ch].rx_off)
+		return;
+
+	if (dch || test_bit(FLG_HDLC, &bch->Flags)) {
+		f1 = HFC_inb_nodebug(hc, A_F1);
+		while (f1 != (temp = HFC_inb_nodebug(hc, A_F1))) {
+			if (debug & DEBUG_HFCMULTI_FIFO)
+				printk(KERN_DEBUG
+				    "%s(card %d): reread f1 because %d!=%d\n",
+				    __func__, hc->id + 1, temp, f1);
+			f1 = temp; /* repeat until F1 is equal */
+		}
+		f2 = HFC_inb_nodebug(hc, A_F2);
+	}
+	z1 = HFC_inw_nodebug(hc, A_Z1) - hc->Zmin;
+	while (z1 != (temp = (HFC_inw_nodebug(hc, A_Z1) - hc->Zmin))) {
+		if (debug & DEBUG_HFCMULTI_FIFO)
+			printk(KERN_DEBUG "%s(card %d): reread z2 because "
+				"%d!=%d\n", __func__, hc->id + 1, temp, z2);
+		z1 = temp; /* repeat until Z1 is equal */
+	}
+	z2 = HFC_inw_nodebug(hc, A_Z2) - hc->Zmin;
+	Zsize = z1 - z2;
+	if ((dch || test_bit(FLG_HDLC, &bch->Flags)) && f1 != f2)
+		/* complete hdlc frame */
+		Zsize++;
+	if (Zsize < 0)
+		Zsize += hc->Zlen;
+	/* if buffer is empty */
+	if (Zsize <= 0)
+		return;
+
+	if (*sp == NULL) {
+		*sp = mI_alloc_skb(maxlen + 3, GFP_ATOMIC);
+		if (*sp == NULL) {
+			printk(KERN_DEBUG "%s: No mem for rx_skb\n",
+			    __func__);
+			return;
+		}
+	}
+	/* show activity */
+	hc->activity[hc->chan[ch].port] = 1;
+
+	/* empty fifo with what we have */
+	if (dch || test_bit(FLG_HDLC, &bch->Flags)) {
+		if (debug & DEBUG_HFCMULTI_FIFO)
+			printk(KERN_DEBUG "%s(card %d): fifo(%d) reading %d "
+			    "bytes (z1=%04x, z2=%04x) HDLC %s (f1=%d, f2=%d) "
+			    "got=%d (again %d)\n", __func__, hc->id + 1, ch,
+			    Zsize, z1, z2, (f1 == f2) ? "fragment" : "COMPLETE",
+			    f1, f2, Zsize + (*sp)->len, again);
+		/* HDLC */
+		if ((Zsize + (*sp)->len) > (maxlen + 3)) {
+			if (debug & DEBUG_HFCMULTI_FIFO)
+				printk(KERN_DEBUG
+				    "%s(card %d): hdlc-frame too large.\n",
+				    __func__, hc->id + 1);
+			skb_trim(*sp, 0);
+			HFC_outb_nodebug(hc, R_INC_RES_FIFO, V_RES_F);
+			HFC_wait_nodebug(hc);
+			return;
+		}
+
+		hc->read_fifo(hc, skb_put(*sp, Zsize), Zsize);
+
+		if (f1 != f2) {
+			/* increment Z2,F2-counter */
+			HFC_outb_nodebug(hc, R_INC_RES_FIFO, V_INC_F);
+			HFC_wait_nodebug(hc);
+			/* check size */
+			if ((*sp)->len < 4) {
+				if (debug & DEBUG_HFCMULTI_FIFO)
+					printk(KERN_DEBUG
+					    "%s(card %d): Frame below minimum "
+					    "size\n", __func__, hc->id + 1);
+				skb_trim(*sp, 0);
+				goto next_frame;
+			}
+			/* there is at least one complete frame, check crc */
+			if ((*sp)->data[(*sp)->len - 1]) {
+				if (debug & DEBUG_HFCMULTI_CRC)
+					printk(KERN_DEBUG
+					    "%s: CRC-error\n", __func__);
+				skb_trim(*sp, 0);
+				goto next_frame;
+			}
+			skb_trim(*sp, (*sp)->len - 3);
+			if ((*sp)->len < MISDN_COPY_SIZE) {
+				skb = *sp;
+				*sp = mI_alloc_skb(skb->len, GFP_ATOMIC);
+				if (*sp) {
+					memcpy(skb_put(*sp, skb->len),
+					    skb->data, skb->len);
+					skb_trim(skb, 0);
+				} else {
+					printk(KERN_DEBUG "%s: No mem\n",
+					    __func__);
+					*sp = skb;
+					skb = NULL;
+				}
+			} else {
+				skb = NULL;
+			}
+			if (debug & DEBUG_HFCMULTI_FIFO) {
+				printk(KERN_DEBUG "%s(card %d):",
+					__func__, hc->id + 1);
+				temp = 0;
+				while (temp < (*sp)->len)
+					printk(" %02x", (*sp)->data[temp++]);
+				printk("\n");
+			}
+			if (dch)
+				recv_Dchannel(dch);
+			else
+				recv_Bchannel(bch);
+			*sp = skb;
+			again++;
+			goto next_frame;
+		}
+		/* there is an incomplete frame */
+	} else {
+		/* transparent */
+		if (Zsize > skb_tailroom(*sp))
+			Zsize = skb_tailroom(*sp);
+		hc->read_fifo(hc, skb_put(*sp, Zsize), Zsize);
+		if (((*sp)->len) < MISDN_COPY_SIZE) {
+			skb = *sp;
+			*sp = mI_alloc_skb(skb->len, GFP_ATOMIC);
+			if (*sp) {
+				memcpy(skb_put(*sp, skb->len),
+				    skb->data, skb->len);
+				skb_trim(skb, 0);
+			} else {
+				printk(KERN_DEBUG "%s: No mem\n", __func__);
+				*sp = skb;
+				skb = NULL;
+			}
+		} else {
+			skb = NULL;
+		}
+		if (debug & DEBUG_HFCMULTI_FIFO)
+			printk(KERN_DEBUG
+			    "%s(card %d): fifo(%d) reading %d bytes "
+			    "(z1=%04x, z2=%04x) TRANS\n",
+				__func__, hc->id + 1, ch, Zsize, z1, z2);
+		/* only bch is transparent */
+		recv_Bchannel(bch);
+		*sp = skb;
+	}
+}
+
+
+/*
+ * Interrupt handler
+ */
+static void
+signal_state_up(struct dchannel *dch, int info, char *msg)
+{
+	struct sk_buff	*skb;
+	int		id, data = info;
+
+	if (debug & DEBUG_HFCMULTI_STATE)
+		printk(KERN_DEBUG "%s: %s\n", __func__, msg);
+
+	id = TEI_SAPI | (GROUP_TEI << 8); /* manager address */
+
+	skb = _alloc_mISDN_skb(MPH_INFORMATION_IND, id, sizeof(data), &data,
+		GFP_ATOMIC);
+	if (!skb)
+		return;
+	recv_Dchannel_skb(dch, skb);
+}
+
+static inline void
+handle_timer_irq(struct hfc_multi *hc)
+{
+	int		ch, temp;
+	struct dchannel	*dch;
+	u_long		flags;
+
+	/* process queued resync jobs */
+	if (hc->e1_resync) {
+		/* lock, so e1_resync gets not changed */
+		spin_lock_irqsave(&HFClock, flags);
+		if (hc->e1_resync & 1) {
+			if (debug & DEBUG_HFCMULTI_PLXSD)
+				printk(KERN_DEBUG "Enable SYNC_I\n");
+			HFC_outb(hc, R_SYNC_CTRL, V_EXT_CLK_SYNC);
+			/* disable JATT, if RX_SYNC is set */
+			if (test_bit(HFC_CHIP_RX_SYNC, &hc->chip))
+				HFC_outb(hc, R_SYNC_OUT, V_SYNC_E1_RX);
+		}
+		if (hc->e1_resync & 2) {
+			if (debug & DEBUG_HFCMULTI_PLXSD)
+				printk(KERN_DEBUG "Enable jatt PLL\n");
+			HFC_outb(hc, R_SYNC_CTRL, V_SYNC_OFFS);
+		}
+		if (hc->e1_resync & 4) {
+			if (debug & DEBUG_HFCMULTI_PLXSD)
+				printk(KERN_DEBUG
+				    "Enable QUARTZ for HFC-E1\n");
+			/* set jatt to quartz */
+			HFC_outb(hc, R_SYNC_CTRL, V_EXT_CLK_SYNC
+				| V_JATT_OFF);
+			/* switch to JATT, in case it is not already */
+			HFC_outb(hc, R_SYNC_OUT, 0);
+		}
+		hc->e1_resync = 0;
+		spin_unlock_irqrestore(&HFClock, flags);
+	}
+
+	if (hc->type != 1 || hc->e1_state == 1)
+		for (ch = 0; ch <= 31; ch++) {
+			if (hc->created[hc->chan[ch].port]) {
+				hfcmulti_tx(hc, ch);
+				/* fifo is started when switching to rx-fifo */
+				hfcmulti_rx(hc, ch);
+				if (hc->chan[ch].dch &&
+				    hc->chan[ch].nt_timer > -1) {
+					dch = hc->chan[ch].dch;
+					if (!(--hc->chan[ch].nt_timer)) {
+						schedule_event(dch,
+						    FLG_PHCHANGE);
+						if (debug &
+						    DEBUG_HFCMULTI_STATE)
+							printk(KERN_DEBUG
+							    "%s: nt_timer at "
+							    "state %x\n",
+							    __func__,
+							    dch->state);
+					}
+				}
+			}
+		}
+	if (hc->type == 1 && hc->created[0]) {
+		dch = hc->chan[hc->dslot].dch;
+		if (test_bit(HFC_CFG_REPORT_LOS, &hc->chan[hc->dslot].cfg)) {
+			/* LOS */
+			temp = HFC_inb_nodebug(hc, R_SYNC_STA) & V_SIG_LOS;
+			if (!temp && hc->chan[hc->dslot].los)
+				signal_state_up(dch, L1_SIGNAL_LOS_ON,
+				    "LOS detected");
+			if (temp && !hc->chan[hc->dslot].los)
+				signal_state_up(dch, L1_SIGNAL_LOS_OFF,
+				    "LOS gone");
+			hc->chan[hc->dslot].los = temp;
+		}
+		if (test_bit(HFC_CFG_REPORT_AIS, &hc->chan[hc->dslot].cfg)) {
+			/* AIS */
+			temp = HFC_inb_nodebug(hc, R_SYNC_STA) & V_AIS;
+			if (!temp && hc->chan[hc->dslot].ais)
+				signal_state_up(dch, L1_SIGNAL_AIS_ON,
+				    "AIS detected");
+			if (temp && !hc->chan[hc->dslot].ais)
+				signal_state_up(dch, L1_SIGNAL_AIS_OFF,
+				    "AIS gone");
+			hc->chan[hc->dslot].ais = temp;
+		}
+		if (test_bit(HFC_CFG_REPORT_SLIP, &hc->chan[hc->dslot].cfg)) {
+			/* SLIP */
+			temp = HFC_inb_nodebug(hc, R_SLIP) & V_FOSLIP_RX;
+			if (!temp && hc->chan[hc->dslot].slip_rx)
+				signal_state_up(dch, L1_SIGNAL_SLIP_RX,
+				    " bit SLIP detected RX");
+			hc->chan[hc->dslot].slip_rx = temp;
+			temp = HFC_inb_nodebug(hc, R_SLIP) & V_FOSLIP_TX;
+			if (!temp && hc->chan[hc->dslot].slip_tx)
+				signal_state_up(dch, L1_SIGNAL_SLIP_TX,
+				    " bit SLIP detected TX");
+			hc->chan[hc->dslot].slip_tx = temp;
+		}
+		if (test_bit(HFC_CFG_REPORT_RDI, &hc->chan[hc->dslot].cfg)) {
+			/* RDI */
+			temp = HFC_inb_nodebug(hc, R_RX_SL0_0) & V_A;
+			if (!temp && hc->chan[hc->dslot].rdi)
+				signal_state_up(dch, L1_SIGNAL_RDI_ON,
+				    "RDI detected");
+			if (temp && !hc->chan[hc->dslot].rdi)
+				signal_state_up(dch, L1_SIGNAL_RDI_OFF,
+				    "RDI gone");
+			hc->chan[hc->dslot].rdi = temp;
+		}
+		temp = HFC_inb_nodebug(hc, R_JATT_DIR);
+		switch (hc->chan[hc->dslot].sync) {
+		case 0:
+			if ((temp & 0x60) == 0x60) {
+				if (debug & DEBUG_HFCMULTI_SYNC)
+					printk(KERN_DEBUG
+					    "%s: (id=%d) E1 now "
+					    "in clock sync\n",
+					    __func__, hc->id);
+				HFC_outb(hc, R_RX_OFF,
+				    hc->chan[hc->dslot].jitter | V_RX_INIT);
+				HFC_outb(hc, R_TX_OFF,
+				    hc->chan[hc->dslot].jitter | V_RX_INIT);
+				hc->chan[hc->dslot].sync = 1;
+				goto check_framesync;
+			}
+			break;
+		case 1:
+			if ((temp & 0x60) != 0x60) {
+				if (debug & DEBUG_HFCMULTI_SYNC)
+					printk(KERN_DEBUG
+					    "%s: (id=%d) E1 "
+					    "lost clock sync\n",
+					    __func__, hc->id);
+				hc->chan[hc->dslot].sync = 0;
+				break;
+			}
+check_framesync:
+			temp = HFC_inb_nodebug(hc, R_SYNC_STA);
+			if (temp == 0x27) {
+				if (debug & DEBUG_HFCMULTI_SYNC)
+					printk(KERN_DEBUG
+					    "%s: (id=%d) E1 "
+					    "now in frame sync\n",
+					    __func__, hc->id);
+				hc->chan[hc->dslot].sync = 2;
+			}
+			break;
+		case 2:
+			if ((temp & 0x60) != 0x60) {
+				if (debug & DEBUG_HFCMULTI_SYNC)
+					printk(KERN_DEBUG
+					    "%s: (id=%d) E1 lost "
+					    "clock & frame sync\n",
+					    __func__, hc->id);
+				hc->chan[hc->dslot].sync = 0;
+				break;
+			}
+			temp = HFC_inb_nodebug(hc, R_SYNC_STA);
+			if (temp != 0x27) {
+				if (debug & DEBUG_HFCMULTI_SYNC)
+					printk(KERN_DEBUG
+					    "%s: (id=%d) E1 "
+					    "lost frame sync\n",
+					    __func__, hc->id);
+				hc->chan[hc->dslot].sync = 1;
+			}
+			break;
+		}
+	}
+
+	if (test_bit(HFC_CHIP_WATCHDOG, &hc->chip))
+		hfcmulti_watchdog(hc);
+
+	if (hc->leds)
+		hfcmulti_leds(hc);
+}
+
+static void
+ph_state_irq(struct hfc_multi *hc, u_char r_irq_statech)
+{
+	struct dchannel	*dch;
+	int		ch;
+	int		active;
+	u_char		st_status, temp;
+
+	/* state machine */
+	for (ch = 0; ch <= 31; ch++) {
+		if (hc->chan[ch].dch) {
+			dch = hc->chan[ch].dch;
+			if (r_irq_statech & 1) {
+				HFC_outb_nodebug(hc, R_ST_SEL,
+					hc->chan[ch].port);
+				/* undocumented: delay after R_ST_SEL */
+				udelay(1);
+				/* undocumented: status changes during read */
+				st_status = HFC_inb_nodebug(hc, A_ST_RD_STATE);
+				while (st_status != (temp =
+					HFC_inb_nodebug(hc, A_ST_RD_STATE))) {
+					if (debug & DEBUG_HFCMULTI_STATE)
+						printk(KERN_DEBUG "%s: reread "
+						    "STATE because %d!=%d\n",
+						    __func__, temp,
+						    st_status);
+					st_status = temp; /* repeat */
+				}
+
+				/* Speech Design TE-sync indication */
+				if (test_bit(HFC_CHIP_PLXSD, &hc->chip) &&
+					dch->dev.D.protocol == ISDN_P_TE_S0) {
+					if (st_status & V_FR_SYNC_ST)
+						hc->syncronized |=
+						    (1 << hc->chan[ch].port);
+					else
+						hc->syncronized &=
+						   ~(1 << hc->chan[ch].port);
+				}
+				dch->state = st_status & 0x0f;
+				if (dch->dev.D.protocol == ISDN_P_NT_S0)
+					active = 3;
+				else
+					active = 7;
+				if (dch->state == active) {
+					HFC_outb_nodebug(hc, R_FIFO,
+						(ch << 1) | 1);
+					HFC_wait_nodebug(hc);
+					HFC_outb_nodebug(hc,
+						R_INC_RES_FIFO, V_RES_F);
+					HFC_wait_nodebug(hc);
+					dch->tx_idx = 0;
+				}
+				schedule_event(dch, FLG_PHCHANGE);
+				if (debug & DEBUG_HFCMULTI_STATE)
+					printk(KERN_DEBUG
+					    "%s: S/T newstate %x port %d\n",
+					    __func__, dch->state,
+					    hc->chan[ch].port);
+			}
+			r_irq_statech >>= 1;
+		}
+	}
+	if (test_bit(HFC_CHIP_PLXSD, &hc->chip))
+		plxsd_checksync(hc, 0);
+}
+
+static void
+fifo_irq(struct hfc_multi *hc, int block)
+{
+	int	ch, j;
+	struct dchannel	*dch;
+	struct bchannel	*bch;
+	u_char r_irq_fifo_bl;
+
+	r_irq_fifo_bl = HFC_inb_nodebug(hc, R_IRQ_FIFO_BL0 + block);
+	j = 0;
+	while (j < 8) {
+		ch = (block << 2) + (j >> 1);
+		dch = hc->chan[ch].dch;
+		bch = hc->chan[ch].bch;
+		if (((!dch) && (!bch)) || (!hc->created[hc->chan[ch].port])) {
+			j += 2;
+			continue;
+		}
+		if (dch && (r_irq_fifo_bl & (1 << j)) &&
+		    test_bit(FLG_ACTIVE, &dch->Flags)) {
+			hfcmulti_tx(hc, ch);
+			/* start fifo */
+			HFC_outb_nodebug(hc, R_FIFO, 0);
+			HFC_wait_nodebug(hc);
+		}
+		if (bch && (r_irq_fifo_bl & (1 << j)) &&
+		    test_bit(FLG_ACTIVE, &bch->Flags)) {
+			hfcmulti_tx(hc, ch);
+			/* start fifo */
+			HFC_outb_nodebug(hc, R_FIFO, 0);
+			HFC_wait_nodebug(hc);
+		}
+		j++;
+		if (dch && (r_irq_fifo_bl & (1 << j)) &&
+		    test_bit(FLG_ACTIVE, &dch->Flags)) {
+			hfcmulti_rx(hc, ch);
+		}
+		if (bch && (r_irq_fifo_bl & (1 << j)) &&
+		    test_bit(FLG_ACTIVE, &bch->Flags)) {
+			hfcmulti_rx(hc, ch);
+		}
+		j++;
+	}
+}
+
+#ifdef IRQ_DEBUG
+int irqsem;
+#endif
+static irqreturn_t
+hfcmulti_interrupt(int intno, void *dev_id)
+{
+#ifdef IRQCOUNT_DEBUG
+	static int iq1 = 0, iq2 = 0, iq3 = 0, iq4 = 0,
+	    iq5 = 0, iq6 = 0, iqcnt = 0;
+#endif
+	static int		count;
+	struct hfc_multi	*hc = dev_id;
+	struct dchannel		*dch;
+	u_char			r_irq_statech, status, r_irq_misc, r_irq_oview;
+	int			i;
+	u_short			*plx_acc, wval;
+	u_char			e1_syncsta, temp;
+	u_long			flags;
+
+	if (!hc) {
+		printk(KERN_ERR "HFC-multi: Spurious interrupt!\n");
+		return IRQ_NONE;
+	}
+
+	spin_lock(&hc->lock);
+
+#ifdef IRQ_DEBUG
+	if (irqsem)
+		printk(KERN_ERR "irq for card %d during irq from "
+		"card %d, this is no bug.\n", hc->id + 1, irqsem);
+	irqsem = hc->id + 1;
+#endif
+
+	if (test_bit(HFC_CHIP_PLXSD, &hc->chip)) {
+		spin_lock_irqsave(&plx_lock, flags);
+		plx_acc = (u_short *)(hc->plx_membase + PLX_INTCSR);
+		wval = readw(plx_acc);
+		spin_unlock_irqrestore(&plx_lock, flags);
+		if (!(wval & PLX_INTCSR_LINTI1_STATUS))
+			goto irq_notforus;
+	}
+
+	status = HFC_inb_nodebug(hc, R_STATUS);
+	r_irq_statech = HFC_inb_nodebug(hc, R_IRQ_STATECH);
+#ifdef IRQCOUNT_DEBUG
+	if (r_irq_statech)
+		iq1++;
+	if (status & V_DTMF_STA)
+		iq2++;
+	if (status & V_LOST_STA)
+		iq3++;
+	if (status & V_EXT_IRQSTA)
+		iq4++;
+	if (status & V_MISC_IRQSTA)
+		iq5++;
+	if (status & V_FR_IRQSTA)
+		iq6++;
+	if (iqcnt++ > 5000) {
+		printk(KERN_ERR "iq1:%x iq2:%x iq3:%x iq4:%x iq5:%x iq6:%x\n",
+		    iq1, iq2, iq3, iq4, iq5, iq6);
+		iqcnt = 0;
+	}
+#endif
+	if (!r_irq_statech &&
+	    !(status & (V_DTMF_STA | V_LOST_STA | V_EXT_IRQSTA |
+	    V_MISC_IRQSTA | V_FR_IRQSTA))) {
+		/* irq is not for us */
+		goto irq_notforus;
+	}
+	hc->irqcnt++;
+	if (r_irq_statech) {
+		if (hc->type != 1)
+			ph_state_irq(hc, r_irq_statech);
+	}
+	if (status & V_EXT_IRQSTA)
+		; /* external IRQ */
+	if (status & V_LOST_STA) {
+		/* LOST IRQ */
+		HFC_outb(hc, R_INC_RES_FIFO, V_RES_LOST); /* clear irq! */
+	}
+	if (status & V_MISC_IRQSTA) {
+		/* misc IRQ */
+		r_irq_misc = HFC_inb_nodebug(hc, R_IRQ_MISC);
+		if (r_irq_misc & V_STA_IRQ) {
+			if (hc->type == 1) {
+				/* state machine */
+				dch = hc->chan[hc->dslot].dch;
+				e1_syncsta = HFC_inb_nodebug(hc, R_SYNC_STA);
+				if (test_bit(HFC_CHIP_PLXSD, &hc->chip)
+				 && hc->e1_getclock) {
+					if (e1_syncsta & V_FR_SYNC_E1)
+						hc->syncronized = 1;
+					else
+						hc->syncronized = 0;
+				}
+				/* undocumented: status changes during read */
+				dch->state = HFC_inb_nodebug(hc, R_E1_RD_STA);
+				while (dch->state != (temp =
+					HFC_inb_nodebug(hc, R_E1_RD_STA))) {
+					if (debug & DEBUG_HFCMULTI_STATE)
+						printk(KERN_DEBUG "%s: reread "
+						    "STATE because %d!=%d\n",
+						    __func__, temp,
+						    dch->state);
+					dch->state = temp; /* repeat */
+				}
+				dch->state = HFC_inb_nodebug(hc, R_E1_RD_STA)
+					& 0x7;
+				schedule_event(dch, FLG_PHCHANGE);
+				if (debug & DEBUG_HFCMULTI_STATE)
+					printk(KERN_DEBUG
+					    "%s: E1 (id=%d) newstate %x\n",
+					    __func__, hc->id, dch->state);
+				if (test_bit(HFC_CHIP_PLXSD, &hc->chip))
+					plxsd_checksync(hc, 0);
+			}
+		}
+		if (r_irq_misc & V_TI_IRQ)
+			handle_timer_irq(hc);
+
+		if (r_irq_misc & V_DTMF_IRQ) {
+			/* -> DTMF IRQ */
+			hfcmulti_dtmf(hc);
+		}
+		/* TODO: REPLACE !!!! 125 us Interrupts are not acceptable  */
+		if (r_irq_misc & V_IRQ_PROC) {
+			/* IRQ every 125us */
+			count++;
+			/* generate 1kHz signal */
+			if (count == 8) {
+				if (hfc_interrupt)
+					hfc_interrupt();
+				count = 0;
+			}
+		}
+
+	}
+	if (status & V_FR_IRQSTA) {
+		/* FIFO IRQ */
+		r_irq_oview = HFC_inb_nodebug(hc, R_IRQ_OVIEW);
+		for (i = 0; i < 8; i++) {
+			if (r_irq_oview & (1 << i))
+				fifo_irq(hc, i);
+		}
+	}
+
+#ifdef IRQ_DEBUG
+	irqsem = 0;
+#endif
+	spin_unlock(&hc->lock);
+	return IRQ_HANDLED;
+
+irq_notforus:
+#ifdef IRQ_DEBUG
+	irqsem = 0;
+#endif
+	spin_unlock(&hc->lock);
+	return IRQ_NONE;
+}
+
+
+/*
+ * timer callback for D-chan busy resolution. Currently no function
+ */
+
+static void
+hfcmulti_dbusy_timer(struct hfc_multi *hc)
+{
+}
+
+
+/*
+ * activate/deactivate hardware for selected channels and mode
+ *
+ * configure B-channel with the given protocol
+ * ch eqals to the HFC-channel (0-31)
+ * ch is the number of channel (0-4,4-7,8-11,12-15,16-19,20-23,24-27,28-31
+ * for S/T, 1-31 for E1)
+ * the hdlc interrupts will be set/unset
+ */
+static int
+mode_hfcmulti(struct hfc_multi *hc, int ch, int protocol, int slot_tx,
+    int bank_tx, int slot_rx, int bank_rx)
+{
+	int flow_tx = 0, flow_rx = 0, routing = 0;
+	int oslot_tx, oslot_rx;
+	int conf;
+
+	if (ch < 0 || ch > 31)
+		return EINVAL;
+	oslot_tx = hc->chan[ch].slot_tx;
+	oslot_rx = hc->chan[ch].slot_rx;
+	conf = hc->chan[ch].conf;
+
+	if (debug & DEBUG_HFCMULTI_MODE)
+		printk(KERN_DEBUG
+		    "%s: card %d channel %d protocol %x slot old=%d new=%d "
+		    "bank new=%d (TX) slot old=%d new=%d bank new=%d (RX)\n",
+		    __func__, hc->id, ch, protocol, oslot_tx, slot_tx,
+		    bank_tx, oslot_rx, slot_rx, bank_rx);
+
+	if (oslot_tx >= 0 && slot_tx != oslot_tx) {
+		/* remove from slot */
+		if (debug & DEBUG_HFCMULTI_MODE)
+			printk(KERN_DEBUG "%s: remove from slot %d (TX)\n",
+			    __func__, oslot_tx);
+		if (hc->slot_owner[oslot_tx<<1] == ch) {
+			HFC_outb(hc, R_SLOT, oslot_tx << 1);
+			HFC_outb(hc, A_SL_CFG, 0);
+			HFC_outb(hc, A_CONF, 0);
+			hc->slot_owner[oslot_tx<<1] = -1;
+		} else {
+			if (debug & DEBUG_HFCMULTI_MODE)
+				printk(KERN_DEBUG
+				    "%s: we are not owner of this tx slot "
+				    "anymore, channel %d is.\n",
+				    __func__, hc->slot_owner[oslot_tx<<1]);
+		}
+	}
+
+	if (oslot_rx >= 0 && slot_rx != oslot_rx) {
+		/* remove from slot */
+		if (debug & DEBUG_HFCMULTI_MODE)
+			printk(KERN_DEBUG
+			    "%s: remove from slot %d (RX)\n",
+			    __func__, oslot_rx);
+		if (hc->slot_owner[(oslot_rx << 1) | 1] == ch) {
+			HFC_outb(hc, R_SLOT, (oslot_rx << 1) | V_SL_DIR);
+			HFC_outb(hc, A_SL_CFG, 0);
+			hc->slot_owner[(oslot_rx << 1) | 1] = -1;
+		} else {
+			if (debug & DEBUG_HFCMULTI_MODE)
+				printk(KERN_DEBUG
+				    "%s: we are not owner of this rx slot "
+				    "anymore, channel %d is.\n",
+				    __func__,
+				    hc->slot_owner[(oslot_rx << 1) | 1]);
+		}
+	}
+
+	if (slot_tx < 0) {
+		flow_tx = 0x80; /* FIFO->ST */
+		/* disable pcm slot */
+		hc->chan[ch].slot_tx = -1;
+		hc->chan[ch].bank_tx = 0;
+	} else {
+		/* set pcm slot */
+		if (hc->chan[ch].txpending)
+			flow_tx = 0x80; /* FIFO->ST */
+		else
+			flow_tx = 0xc0; /* PCM->ST */
+		/* put on slot */
+		routing = bank_tx ? 0xc0 : 0x80;
+		if (conf >= 0 || bank_tx > 1)
+			routing = 0x40; /* loop */
+		if (debug & DEBUG_HFCMULTI_MODE)
+			printk(KERN_DEBUG "%s: put channel %d to slot %d bank"
+			    " %d flow %02x routing %02x conf %d (TX)\n",
+			    __func__, ch, slot_tx, bank_tx,
+			    flow_tx, routing, conf);
+		HFC_outb(hc, R_SLOT, slot_tx << 1);
+		HFC_outb(hc, A_SL_CFG, (ch<<1) | routing);
+		HFC_outb(hc, A_CONF, (conf < 0) ? 0 : (conf | V_CONF_SL));
+		hc->slot_owner[slot_tx << 1] = ch;
+		hc->chan[ch].slot_tx = slot_tx;
+		hc->chan[ch].bank_tx = bank_tx;
+	}
+	if (slot_rx < 0) {
+		/* disable pcm slot */
+		flow_rx = 0x80; /* ST->FIFO */
+		hc->chan[ch].slot_rx = -1;
+		hc->chan[ch].bank_rx = 0;
+	} else {
+		/* set pcm slot */
+		if (hc->chan[ch].txpending)
+			flow_rx = 0x80; /* ST->FIFO */
+		else
+			flow_rx = 0xc0; /* ST->(FIFO,PCM) */
+		/* put on slot */
+		routing = bank_rx?0x80:0xc0; /* reversed */
+		if (conf >= 0 || bank_rx > 1)
+			routing = 0x40; /* loop */
+		if (debug & DEBUG_HFCMULTI_MODE)
+			printk(KERN_DEBUG "%s: put channel %d to slot %d bank"
+			    " %d flow %02x routing %02x conf %d (RX)\n",
+			    __func__, ch, slot_rx, bank_rx,
+			    flow_rx, routing, conf);
+		HFC_outb(hc, R_SLOT, (slot_rx<<1) | V_SL_DIR);
+		HFC_outb(hc, A_SL_CFG, (ch<<1) | V_CH_DIR | routing);
+		hc->slot_owner[(slot_rx<<1)|1] = ch;
+		hc->chan[ch].slot_rx = slot_rx;
+		hc->chan[ch].bank_rx = bank_rx;
+	}
+
+	switch (protocol) {
+	case (ISDN_P_NONE):
+		/* disable TX fifo */
+		HFC_outb(hc, R_FIFO, ch << 1);
+		HFC_wait(hc);
+		HFC_outb(hc, A_CON_HDLC, flow_tx | 0x00 | V_IFF);
+		HFC_outb(hc, A_SUBCH_CFG, 0);
+		HFC_outb(hc, A_IRQ_MSK, 0);
+		HFC_outb(hc, R_INC_RES_FIFO, V_RES_F);
+		HFC_wait(hc);
+		/* disable RX fifo */
+		HFC_outb(hc, R_FIFO, (ch<<1)|1);
+		HFC_wait(hc);
+		HFC_outb(hc, A_CON_HDLC, flow_rx | 0x00);
+		HFC_outb(hc, A_SUBCH_CFG, 0);
+		HFC_outb(hc, A_IRQ_MSK, 0);
+		HFC_outb(hc, R_INC_RES_FIFO, V_RES_F);
+		HFC_wait(hc);
+		if (hc->chan[ch].bch && hc->type != 1) {
+			hc->hw.a_st_ctrl0[hc->chan[ch].port] &=
+			    ((ch & 0x3) == 0)? ~V_B1_EN: ~V_B2_EN;
+			HFC_outb(hc, R_ST_SEL, hc->chan[ch].port);
+			/* undocumented: delay after R_ST_SEL */
+			udelay(1);
+			HFC_outb(hc, A_ST_CTRL0,
+			    hc->hw.a_st_ctrl0[hc->chan[ch].port]);
+		}
+		if (hc->chan[ch].bch) {
+			test_and_clear_bit(FLG_HDLC, &hc->chan[ch].bch->Flags);
+			test_and_clear_bit(FLG_TRANSPARENT,
+			    &hc->chan[ch].bch->Flags);
+		}
+		break;
+	case (ISDN_P_B_RAW): /* B-channel */
+
+		if (test_bit(HFC_CHIP_B410P, &hc->chip) &&
+		    (hc->chan[ch].slot_rx < 0) &&
+		    (hc->chan[ch].slot_tx < 0)) {
+
+			printk(KERN_DEBUG
+			    "Setting B-channel %d to echo cancelable "
+			    "state on PCM slot %d\n", ch,
+			    ((ch / 4) * 8) + ((ch % 4) * 4) + 1);
+			printk(KERN_DEBUG
+			    "Enabling pass through for channel\n");
+			vpm_out(hc, ch, ((ch / 4) * 8) +
+			    ((ch % 4) * 4) + 1, 0x01);
+			/* rx path */
+			/* S/T -> PCM */
+			HFC_outb(hc, R_FIFO, (ch << 1));
+			HFC_wait(hc);
+			HFC_outb(hc, A_CON_HDLC, 0xc0 | V_HDLC_TRP | V_IFF);
+			HFC_outb(hc, R_SLOT, (((ch / 4) * 8) +
+			    ((ch % 4) * 4) + 1) << 1);
+			HFC_outb(hc, A_SL_CFG, 0x80 | (ch << 1));
+
+			/* PCM -> FIFO */
+			HFC_outb(hc, R_FIFO, 0x20 | (ch << 1) | 1);
+			HFC_wait(hc);
+			HFC_outb(hc, A_CON_HDLC, 0x20 | V_HDLC_TRP | V_IFF);
+			HFC_outb(hc, A_SUBCH_CFG, 0);
+			HFC_outb(hc, A_IRQ_MSK, 0);
+			HFC_outb(hc, R_INC_RES_FIFO, V_RES_F);
+			HFC_wait(hc);
+			HFC_outb(hc, R_SLOT, ((((ch / 4) * 8) +
+			    ((ch % 4) * 4) + 1) << 1) | 1);
+			HFC_outb(hc, A_SL_CFG, 0x80 | 0x20 | (ch << 1) | 1);
+
+			/* tx path */
+			/* PCM -> S/T */
+			HFC_outb(hc, R_FIFO, (ch << 1) | 1);
+			HFC_wait(hc);
+			HFC_outb(hc, A_CON_HDLC, 0xc0 | V_HDLC_TRP | V_IFF);
+			HFC_outb(hc, R_SLOT, ((((ch / 4) * 8) +
+			    ((ch % 4) * 4)) << 1) | 1);
+			HFC_outb(hc, A_SL_CFG, 0x80 | 0x40 | (ch << 1) | 1);
+
+			/* FIFO -> PCM */
+			HFC_outb(hc, R_FIFO, 0x20 | (ch << 1));
+			HFC_wait(hc);
+			HFC_outb(hc, A_CON_HDLC, 0x20 | V_HDLC_TRP | V_IFF);
+			HFC_outb(hc, A_SUBCH_CFG, 0);
+			HFC_outb(hc, A_IRQ_MSK, 0);
+			HFC_outb(hc, R_INC_RES_FIFO, V_RES_F);
+			HFC_wait(hc);
+			/* tx silence */
+			HFC_outb_nodebug(hc, A_FIFO_DATA0_NOINC, silence);
+			HFC_outb(hc, R_SLOT, (((ch / 4) * 8) +
+			    ((ch % 4) * 4)) << 1);
+			HFC_outb(hc, A_SL_CFG, 0x80 | 0x20 | (ch << 1));
+		} else {
+			/* enable TX fifo */
+			HFC_outb(hc, R_FIFO, ch << 1);
+			HFC_wait(hc);
+			HFC_outb(hc, A_CON_HDLC, flow_tx | 0x00 |
+			    V_HDLC_TRP | V_IFF);
+			HFC_outb(hc, A_SUBCH_CFG, 0);
+			HFC_outb(hc, A_IRQ_MSK, 0);
+			HFC_outb(hc, R_INC_RES_FIFO, V_RES_F);
+			HFC_wait(hc);
+			/* tx silence */
+			HFC_outb_nodebug(hc, A_FIFO_DATA0_NOINC, silence);
+			/* enable RX fifo */
+			HFC_outb(hc, R_FIFO, (ch<<1)|1);
+			HFC_wait(hc);
+			HFC_outb(hc, A_CON_HDLC, flow_rx | 0x00 | V_HDLC_TRP);
+			HFC_outb(hc, A_SUBCH_CFG, 0);
+			HFC_outb(hc, A_IRQ_MSK, 0);
+			HFC_outb(hc, R_INC_RES_FIFO, V_RES_F);
+			HFC_wait(hc);
+		}
+		if (hc->type != 1) {
+			hc->hw.a_st_ctrl0[hc->chan[ch].port] |=
+			    ((ch & 0x3) == 0) ? V_B1_EN : V_B2_EN;
+			HFC_outb(hc, R_ST_SEL, hc->chan[ch].port);
+			/* undocumented: delay after R_ST_SEL */
+			udelay(1);
+			HFC_outb(hc, A_ST_CTRL0,
+			    hc->hw.a_st_ctrl0[hc->chan[ch].port]);
+		}
+		if (hc->chan[ch].bch)
+			test_and_set_bit(FLG_TRANSPARENT,
+			    &hc->chan[ch].bch->Flags);
+		break;
+	case (ISDN_P_B_HDLC): /* B-channel */
+	case (ISDN_P_TE_S0): /* D-channel */
+	case (ISDN_P_NT_S0):
+	case (ISDN_P_TE_E1):
+	case (ISDN_P_NT_E1):
+		/* enable TX fifo */
+		HFC_outb(hc, R_FIFO, ch<<1);
+		HFC_wait(hc);
+		if (hc->type == 1 || hc->chan[ch].bch) {
+			/* E1 or B-channel */
+			HFC_outb(hc, A_CON_HDLC, flow_tx | 0x04);
+			HFC_outb(hc, A_SUBCH_CFG, 0);
+		} else {
+			/* D-Channel without HDLC fill flags */
+			HFC_outb(hc, A_CON_HDLC, flow_tx | 0x04 | V_IFF);
+			HFC_outb(hc, A_SUBCH_CFG, 2);
+		}
+		HFC_outb(hc, A_IRQ_MSK, V_IRQ);
+		HFC_outb(hc, R_INC_RES_FIFO, V_RES_F);
+		HFC_wait(hc);
+		/* enable RX fifo */
+		HFC_outb(hc, R_FIFO, (ch<<1)|1);
+		HFC_wait(hc);
+		HFC_outb(hc, A_CON_HDLC, flow_rx | 0x04);
+		if (hc->type == 1 || hc->chan[ch].bch)
+			HFC_outb(hc, A_SUBCH_CFG, 0); /* full 8 bits */
+		else
+			HFC_outb(hc, A_SUBCH_CFG, 2); /* 2 bits dchannel */
+		HFC_outb(hc, A_IRQ_MSK, V_IRQ);
+		HFC_outb(hc, R_INC_RES_FIFO, V_RES_F);
+		HFC_wait(hc);
+		if (hc->chan[ch].bch) {
+			test_and_set_bit(FLG_HDLC, &hc->chan[ch].bch->Flags);
+			if (hc->type != 1) {
+				hc->hw.a_st_ctrl0[hc->chan[ch].port] |=
+				  ((ch&0x3) == 0) ? V_B1_EN : V_B2_EN;
+				HFC_outb(hc, R_ST_SEL, hc->chan[ch].port);
+				/* undocumented: delay after R_ST_SEL */
+				udelay(1);
+				HFC_outb(hc, A_ST_CTRL0,
+				  hc->hw.a_st_ctrl0[hc->chan[ch].port]);
+			}
+		}
+		break;
+	default:
+		printk(KERN_DEBUG "%s: protocol not known %x\n",
+		    __func__, protocol);
+		hc->chan[ch].protocol = ISDN_P_NONE;
+		return -ENOPROTOOPT;
+	}
+	hc->chan[ch].protocol = protocol;
+	return 0;
+}
+
+
+/*
+ * connect/disconnect PCM
+ */
+
+static void
+hfcmulti_pcm(struct hfc_multi *hc, int ch, int slot_tx, int bank_tx,
+    int slot_rx, int bank_rx)
+{
+	if (slot_rx < 0 || slot_rx < 0 || bank_tx < 0 || bank_rx < 0) {
+		/* disable PCM */
+		mode_hfcmulti(hc, ch, hc->chan[ch].protocol, -1, 0, -1, 0);
+		return;
+	}
+
+	/* enable pcm */
+	mode_hfcmulti(hc, ch, hc->chan[ch].protocol, slot_tx, bank_tx,
+		slot_rx, bank_rx);
+}
+
+/*
+ * set/disable conference
+ */
+
+static void
+hfcmulti_conf(struct hfc_multi *hc, int ch, int num)
+{
+	if (num >= 0 && num <= 7)
+		hc->chan[ch].conf = num;
+	else
+		hc->chan[ch].conf = -1;
+	mode_hfcmulti(hc, ch, hc->chan[ch].protocol, hc->chan[ch].slot_tx,
+	    hc->chan[ch].bank_tx, hc->chan[ch].slot_rx,
+	    hc->chan[ch].bank_rx);
+}
+
+
+/*
+ * set/disable sample loop
+ */
+
+/* NOTE: this function is experimental and therefore disabled */
+
+/*
+ * Layer 1 callback function
+ */
+static int
+hfcm_l1callback(struct dchannel *dch, u_int cmd)
+{
+	struct hfc_multi	*hc = dch->hw;
+	u_long	flags;
+
+	switch (cmd) {
+	case INFO3_P8:
+	case INFO3_P10:
+		break;
+	case HW_RESET_REQ:
+		/* start activation */
+		spin_lock_irqsave(&hc->lock, flags);
+		if (hc->type == 1) {
+			if (debug & DEBUG_HFCMULTI_MSG)
+				printk(KERN_DEBUG
+				    "%s: HW_RESET_REQ no BRI\n",
+				    __func__);
+		} else {
+			HFC_outb(hc, R_ST_SEL, hc->chan[dch->slot].port);
+			/* undocumented: delay after R_ST_SEL */
+			udelay(1);
+			HFC_outb(hc, A_ST_WR_STATE, V_ST_LD_STA | 3); /* F3 */
+			udelay(6); /* wait at least 5,21us */
+			HFC_outb(hc, A_ST_WR_STATE, 3);
+			HFC_outb(hc, A_ST_WR_STATE, 3 | (V_ST_ACT*3));
+				/* activate */
+		}
+		spin_unlock_irqrestore(&hc->lock, flags);
+		l1_event(dch->l1, HW_POWERUP_IND);
+		break;
+	case HW_DEACT_REQ:
+		/* start deactivation */
+		spin_lock_irqsave(&hc->lock, flags);
+		if (hc->type == 1) {
+			if (debug & DEBUG_HFCMULTI_MSG)
+				printk(KERN_DEBUG
+				    "%s: HW_DEACT_REQ no BRI\n",
+				    __func__);
+		} else {
+			HFC_outb(hc, R_ST_SEL, hc->chan[dch->slot].port);
+			/* undocumented: delay after R_ST_SEL */
+			udelay(1);
+			HFC_outb(hc, A_ST_WR_STATE, V_ST_ACT*2);
+				/* deactivate */
+			if (test_bit(HFC_CHIP_PLXSD, &hc->chip)) {
+				hc->syncronized &=
+				   ~(1 << hc->chan[dch->slot].port);
+				plxsd_checksync(hc, 0);
+			}
+		}
+		skb_queue_purge(&dch->squeue);
+		if (dch->tx_skb) {
+			dev_kfree_skb(dch->tx_skb);
+			dch->tx_skb = NULL;
+		}
+		dch->tx_idx = 0;
+		if (dch->rx_skb) {
+			dev_kfree_skb(dch->rx_skb);
+			dch->rx_skb = NULL;
+		}
+		test_and_clear_bit(FLG_TX_BUSY, &dch->Flags);
+		if (test_and_clear_bit(FLG_BUSY_TIMER, &dch->Flags))
+			del_timer(&dch->timer);
+		spin_unlock_irqrestore(&hc->lock, flags);
+		break;
+	case HW_POWERUP_REQ:
+		spin_lock_irqsave(&hc->lock, flags);
+		if (hc->type == 1) {
+			if (debug & DEBUG_HFCMULTI_MSG)
+				printk(KERN_DEBUG
+				    "%s: HW_POWERUP_REQ no BRI\n",
+				    __func__);
+		} else {
+			HFC_outb(hc, R_ST_SEL, hc->chan[dch->slot].port);
+			/* undocumented: delay after R_ST_SEL */
+			udelay(1);
+			HFC_outb(hc, A_ST_WR_STATE, 3 | 0x10); /* activate */
+			udelay(6); /* wait at least 5,21us */
+			HFC_outb(hc, A_ST_WR_STATE, 3); /* activate */
+		}
+		spin_unlock_irqrestore(&hc->lock, flags);
+		break;
+	case PH_ACTIVATE_IND:
+		test_and_set_bit(FLG_ACTIVE, &dch->Flags);
+		_queue_data(&dch->dev.D, cmd, MISDN_ID_ANY, 0, NULL,
+			GFP_ATOMIC);
+		break;
+	case PH_DEACTIVATE_IND:
+		test_and_clear_bit(FLG_ACTIVE, &dch->Flags);
+		_queue_data(&dch->dev.D, cmd, MISDN_ID_ANY, 0, NULL,
+			GFP_ATOMIC);
+		break;
+	default:
+		if (dch->debug & DEBUG_HW)
+			printk(KERN_DEBUG "%s: unknown command %x\n",
+			    __func__, cmd);
+		return -1;
+	}
+	return 0;
+}
+
+/*
+ * Layer2 -> Layer 1 Transfer
+ */
+
+static int
+handle_dmsg(struct mISDNchannel *ch, struct sk_buff *skb)
+{
+	struct mISDNdevice	*dev = container_of(ch, struct mISDNdevice, D);
+	struct dchannel		*dch = container_of(dev, struct dchannel, dev);
+	struct hfc_multi	*hc = dch->hw;
+	struct mISDNhead	*hh = mISDN_HEAD_P(skb);
+	int			ret = -EINVAL;
+	unsigned int		id;
+	u_long			flags;
+
+	switch (hh->prim) {
+	case PH_DATA_REQ:
+		if (skb->len < 1)
+			break;
+		spin_lock_irqsave(&hc->lock, flags);
+		ret = dchannel_senddata(dch, skb);
+		if (ret > 0) { /* direct TX */
+			id = hh->id; /* skb can be freed */
+			hfcmulti_tx(hc, dch->slot);
+			ret = 0;
+			/* start fifo */
+			HFC_outb(hc, R_FIFO, 0);
+			HFC_wait(hc);
+			spin_unlock_irqrestore(&hc->lock, flags);
+			queue_ch_frame(ch, PH_DATA_CNF, id, NULL);
+		} else
+			spin_unlock_irqrestore(&hc->lock, flags);
+		return ret;
+	case PH_ACTIVATE_REQ:
+		if (dch->dev.D.protocol != ISDN_P_TE_S0) {
+			spin_lock_irqsave(&hc->lock, flags);
+			ret = 0;
+			if (debug & DEBUG_HFCMULTI_MSG)
+				printk(KERN_DEBUG
+				    "%s: PH_ACTIVATE port %d (0..%d)\n",
+				    __func__, hc->chan[dch->slot].port,
+				    hc->ports-1);
+			/* start activation */
+			if (hc->type == 1) {
+				ph_state_change(dch);
+				if (debug & DEBUG_HFCMULTI_STATE)
+					printk(KERN_DEBUG
+					    "%s: E1 report state %x \n",
+					    __func__, dch->state);
+			} else {
+				HFC_outb(hc, R_ST_SEL,
+				    hc->chan[dch->slot].port);
+				/* undocumented: delay after R_ST_SEL */
+				udelay(1);
+				HFC_outb(hc, A_ST_WR_STATE, V_ST_LD_STA | 1);
+				    /* G1 */
+				udelay(6); /* wait at least 5,21us */
+				HFC_outb(hc, A_ST_WR_STATE, 1);
+				HFC_outb(hc, A_ST_WR_STATE, 1 |
+				    (V_ST_ACT*3)); /* activate */
+				dch->state = 1;
+			}
+			spin_unlock_irqrestore(&hc->lock, flags);
+		} else
+			ret = l1_event(dch->l1, hh->prim);
+		break;
+	case PH_DEACTIVATE_REQ:
+		test_and_clear_bit(FLG_L2_ACTIVATED, &dch->Flags);
+		if (dch->dev.D.protocol != ISDN_P_TE_S0) {
+			spin_lock_irqsave(&hc->lock, flags);
+			if (debug & DEBUG_HFCMULTI_MSG)
+				printk(KERN_DEBUG
+				    "%s: PH_DEACTIVATE port %d (0..%d)\n",
+				    __func__, hc->chan[dch->slot].port,
+				    hc->ports-1);
+			/* start deactivation */
+			if (hc->type == 1) {
+				if (debug & DEBUG_HFCMULTI_MSG)
+					printk(KERN_DEBUG
+					    "%s: PH_DEACTIVATE no BRI\n",
+					    __func__);
+			} else {
+				HFC_outb(hc, R_ST_SEL,
+				    hc->chan[dch->slot].port);
+				/* undocumented: delay after R_ST_SEL */
+				udelay(1);
+				HFC_outb(hc, A_ST_WR_STATE, V_ST_ACT * 2);
+				    /* deactivate */
+				dch->state = 1;
+			}
+			skb_queue_purge(&dch->squeue);
+			if (dch->tx_skb) {
+				dev_kfree_skb(dch->tx_skb);
+				dch->tx_skb = NULL;
+			}
+			dch->tx_idx = 0;
+			if (dch->rx_skb) {
+				dev_kfree_skb(dch->rx_skb);
+				dch->rx_skb = NULL;
+			}
+			test_and_clear_bit(FLG_TX_BUSY, &dch->Flags);
+			if (test_and_clear_bit(FLG_BUSY_TIMER, &dch->Flags))
+				del_timer(&dch->timer);
+#ifdef FIXME
+			if (test_and_clear_bit(FLG_L1_BUSY, &dch->Flags))
+				dchannel_sched_event(&hc->dch, D_CLEARBUSY);
+#endif
+			ret = 0;
+			spin_unlock_irqrestore(&hc->lock, flags);
+		} else
+			ret = l1_event(dch->l1, hh->prim);
+		break;
+	}
+	if (!ret)
+		dev_kfree_skb(skb);
+	return ret;
+}
+
+static void
+deactivate_bchannel(struct bchannel *bch)
+{
+	struct hfc_multi	*hc = bch->hw;
+	u_long			flags;
+
+	spin_lock_irqsave(&hc->lock, flags);
+	if (test_and_clear_bit(FLG_TX_NEXT, &bch->Flags)) {
+		dev_kfree_skb(bch->next_skb);
+		bch->next_skb = NULL;
+	}
+	if (bch->tx_skb) {
+		dev_kfree_skb(bch->tx_skb);
+		bch->tx_skb = NULL;
+	}
+	bch->tx_idx = 0;
+	if (bch->rx_skb) {
+		dev_kfree_skb(bch->rx_skb);
+		bch->rx_skb = NULL;
+	}
+	hc->chan[bch->slot].coeff_count = 0;
+	test_and_clear_bit(FLG_ACTIVE, &bch->Flags);
+	test_and_clear_bit(FLG_TX_BUSY, &bch->Flags);
+	hc->chan[bch->slot].rx_off = 0;
+	hc->chan[bch->slot].conf = -1;
+	mode_hfcmulti(hc, bch->slot, ISDN_P_NONE, -1, 0, -1, 0);
+	spin_unlock_irqrestore(&hc->lock, flags);
+}
+
+static int
+handle_bmsg(struct mISDNchannel *ch, struct sk_buff *skb)
+{
+	struct bchannel		*bch = container_of(ch, struct bchannel, ch);
+	struct hfc_multi	*hc = bch->hw;
+	int			ret = -EINVAL;
+	struct mISDNhead	*hh = mISDN_HEAD_P(skb);
+	unsigned int		id;
+	u_long			flags;
+
+	switch (hh->prim) {
+	case PH_DATA_REQ:
+		if (!skb->len)
+			break;
+		spin_lock_irqsave(&hc->lock, flags);
+		ret = bchannel_senddata(bch, skb);
+		if (ret > 0) { /* direct TX */
+			id = hh->id; /* skb can be freed */
+			hfcmulti_tx(hc, bch->slot);
+			ret = 0;
+			/* start fifo */
+			HFC_outb_nodebug(hc, R_FIFO, 0);
+			HFC_wait_nodebug(hc);
+			if (!test_bit(FLG_TRANSPARENT, &bch->Flags)) {
+				spin_unlock_irqrestore(&hc->lock, flags);
+				queue_ch_frame(ch, PH_DATA_CNF, id, NULL);
+			} else
+				spin_unlock_irqrestore(&hc->lock, flags);
+		} else
+			spin_unlock_irqrestore(&hc->lock, flags);
+		return ret;
+	case PH_ACTIVATE_REQ:
+		if (debug & DEBUG_HFCMULTI_MSG)
+			printk(KERN_DEBUG "%s: PH_ACTIVATE ch %d (0..32)\n",
+				__func__, bch->slot);
+		spin_lock_irqsave(&hc->lock, flags);
+		/* activate B-channel if not already activated */
+		if (!test_and_set_bit(FLG_ACTIVE, &bch->Flags)) {
+			hc->chan[bch->slot].txpending = 0;
+			ret = mode_hfcmulti(hc, bch->slot,
+				ch->protocol,
+				hc->chan[bch->slot].slot_tx,
+				hc->chan[bch->slot].bank_tx,
+				hc->chan[bch->slot].slot_rx,
+				hc->chan[bch->slot].bank_rx);
+			if (!ret) {
+				if (ch->protocol == ISDN_P_B_RAW && !hc->dtmf
+					&& test_bit(HFC_CHIP_DTMF, &hc->chip)) {
+					/* start decoder */
+					hc->dtmf = 1;
+					if (debug & DEBUG_HFCMULTI_DTMF)
+						printk(KERN_DEBUG
+						    "%s: start dtmf decoder\n",
+							__func__);
+					HFC_outb(hc, R_DTMF, hc->hw.r_dtmf |
+					    V_RST_DTMF);
+				}
+			}
+		} else
+			ret = 0;
+		spin_unlock_irqrestore(&hc->lock, flags);
+		if (!ret)
+			_queue_data(ch, PH_ACTIVATE_IND, MISDN_ID_ANY, 0, NULL,
+				GFP_KERNEL);
+		break;
+	case PH_CONTROL_REQ:
+		spin_lock_irqsave(&hc->lock, flags);
+		switch (hh->id) {
+		case HFC_SPL_LOOP_ON: /* set sample loop */
+			if (debug & DEBUG_HFCMULTI_MSG)
+			printk(KERN_DEBUG
+			    "%s: HFC_SPL_LOOP_ON (len = %d)\n",
+			    __func__, skb->len);
+			ret = 0;
+			break;
+		case HFC_SPL_LOOP_OFF: /* set silence */
+			if (debug & DEBUG_HFCMULTI_MSG)
+				printk(KERN_DEBUG "%s: HFC_SPL_LOOP_OFF\n",
+				    __func__);
+			ret = 0;
+			break;
+		default:
+			printk(KERN_ERR
+			     "%s: unknown PH_CONTROL_REQ info %x\n",
+			     __func__, hh->id);
+			ret = -EINVAL;
+		}
+		spin_unlock_irqrestore(&hc->lock, flags);
+		break;
+	case PH_DEACTIVATE_REQ:
+		deactivate_bchannel(bch); /* locked there */
+		_queue_data(ch, PH_DEACTIVATE_IND, MISDN_ID_ANY, 0, NULL,
+			GFP_KERNEL);
+		ret = 0;
+		break;
+	}
+	if (!ret)
+		dev_kfree_skb(skb);
+	return ret;
+}
+
+/*
+ * bchannel control function
+ */
+static int
+channel_bctrl(struct bchannel *bch, struct mISDN_ctrl_req *cq)
+{
+	int			ret = 0;
+	struct dsp_features	*features =
+		(struct dsp_features *)(*((u_long *)&cq->p1));
+	struct hfc_multi	*hc = bch->hw;
+	int			slot_tx;
+	int			bank_tx;
+	int			slot_rx;
+	int			bank_rx;
+	int			num;
+
+	switch (cq->op) {
+	case MISDN_CTRL_GETOP:
+		cq->op = MISDN_CTRL_HFC_OP | MISDN_CTRL_HW_FEATURES_OP
+			| MISDN_CTRL_RX_OFF;
+		break;
+	case MISDN_CTRL_RX_OFF: /* turn off / on rx stream */
+		hc->chan[bch->slot].rx_off = !!cq->p1;
+		if (!hc->chan[bch->slot].rx_off) {
+			/* reset fifo on rx on */
+			HFC_outb_nodebug(hc, R_FIFO, (bch->slot << 1) | 1);
+			HFC_wait_nodebug(hc);
+			HFC_outb_nodebug(hc, R_INC_RES_FIFO, V_RES_F);
+			HFC_wait_nodebug(hc);
+		}
+		if (debug & DEBUG_HFCMULTI_MSG)
+			printk(KERN_DEBUG "%s: RX_OFF request (nr=%d off=%d)\n",
+			    __func__, bch->nr, hc->chan[bch->slot].rx_off);
+		break;
+	case MISDN_CTRL_HW_FEATURES: /* fill features structure */
+		if (debug & DEBUG_HFCMULTI_MSG)
+			printk(KERN_DEBUG "%s: HW_FEATURE request\n",
+			    __func__);
+		/* create confirm */
+		features->hfc_id = hc->id;
+		if (test_bit(HFC_CHIP_DTMF, &hc->chip))
+			features->hfc_dtmf = 1;
+		features->hfc_loops = 0;
+		if (test_bit(HFC_CHIP_B410P, &hc->chip)) {
+			features->hfc_echocanhw = 1;
+		} else {
+			features->pcm_id = hc->pcm;
+			features->pcm_slots = hc->slots;
+			features->pcm_banks = 2;
+		}
+		break;
+	case MISDN_CTRL_HFC_PCM_CONN: /* connect to pcm timeslot (0..N) */
+		slot_tx = cq->p1 & 0xff;
+		bank_tx = cq->p1 >> 8;
+		slot_rx = cq->p2 & 0xff;
+		bank_rx = cq->p2 >> 8;
+		if (debug & DEBUG_HFCMULTI_MSG)
+			printk(KERN_DEBUG
+			    "%s: HFC_PCM_CONN slot %d bank %d (TX) "
+			    "slot %d bank %d (RX)\n",
+			    __func__, slot_tx, bank_tx,
+			    slot_rx, bank_rx);
+		if (slot_tx < hc->slots && bank_tx <= 2 &&
+		    slot_rx < hc->slots && bank_rx <= 2)
+			hfcmulti_pcm(hc, bch->slot,
+			    slot_tx, bank_tx, slot_rx, bank_rx);
+		else {
+			printk(KERN_WARNING
+			    "%s: HFC_PCM_CONN slot %d bank %d (TX) "
+			    "slot %d bank %d (RX) out of range\n",
+			    __func__, slot_tx, bank_tx,
+			    slot_rx, bank_rx);
+			ret = -EINVAL;
+		}
+		break;
+	case MISDN_CTRL_HFC_PCM_DISC: /* release interface from pcm timeslot */
+		if (debug & DEBUG_HFCMULTI_MSG)
+			printk(KERN_DEBUG "%s: HFC_PCM_DISC\n",
+			    __func__);
+		hfcmulti_pcm(hc, bch->slot, -1, 0, -1, 0);
+		break;
+	case MISDN_CTRL_HFC_CONF_JOIN: /* join conference (0..7) */
+		num = cq->p1 & 0xff;
+		if (debug & DEBUG_HFCMULTI_MSG)
+			printk(KERN_DEBUG "%s: HFC_CONF_JOIN conf %d\n",
+			    __func__, num);
+		if (num <= 7)
+			hfcmulti_conf(hc, bch->slot, num);
+		else {
+			printk(KERN_WARNING
+			    "%s: HW_CONF_JOIN conf %d out of range\n",
+			    __func__, num);
+			ret = -EINVAL;
+		}
+		break;
+	case MISDN_CTRL_HFC_CONF_SPLIT: /* split conference */
+		if (debug & DEBUG_HFCMULTI_MSG)
+			printk(KERN_DEBUG "%s: HFC_CONF_SPLIT\n", __func__);
+		hfcmulti_conf(hc, bch->slot, -1);
+		break;
+	case MISDN_CTRL_HFC_ECHOCAN_ON:
+		if (debug & DEBUG_HFCMULTI_MSG)
+			printk(KERN_DEBUG "%s: HFC_ECHOCAN_ON\n", __func__);
+		if (test_bit(HFC_CHIP_B410P, &hc->chip))
+			vpm_echocan_on(hc, bch->slot, cq->p1);
+		else
+			ret = -EINVAL;
+		break;
+
+	case MISDN_CTRL_HFC_ECHOCAN_OFF:
+		if (debug & DEBUG_HFCMULTI_MSG)
+			printk(KERN_DEBUG "%s: HFC_ECHOCAN_OFF\n",
+				__func__);
+		if (test_bit(HFC_CHIP_B410P, &hc->chip))
+			vpm_echocan_off(hc, bch->slot);
+		else
+			ret = -EINVAL;
+		break;
+	default:
+		printk(KERN_WARNING "%s: unknown Op %x\n",
+		    __func__, cq->op);
+		ret = -EINVAL;
+		break;
+	}
+	return ret;
+}
+
+static int
+hfcm_bctrl(struct mISDNchannel *ch, u_int cmd, void *arg)
+{
+	struct bchannel		*bch = container_of(ch, struct bchannel, ch);
+	struct hfc_multi	*hc = bch->hw;
+	int			err = -EINVAL;
+	u_long	flags;
+
+	if (bch->debug & DEBUG_HW)
+		printk(KERN_DEBUG "%s: cmd:%x %p\n",
+		    __func__, cmd, arg);
+	switch (cmd) {
+	case CLOSE_CHANNEL:
+		test_and_clear_bit(FLG_OPEN, &bch->Flags);
+		if (test_bit(FLG_ACTIVE, &bch->Flags))
+			deactivate_bchannel(bch); /* locked there */
+		ch->protocol = ISDN_P_NONE;
+		ch->peer = NULL;
+		module_put(THIS_MODULE);
+		err = 0;
+		break;
+	case CONTROL_CHANNEL:
+		spin_lock_irqsave(&hc->lock, flags);
+		err = channel_bctrl(bch, arg);
+		spin_unlock_irqrestore(&hc->lock, flags);
+		break;
+	default:
+		printk(KERN_WARNING "%s: unknown prim(%x)\n",
+			__func__, cmd);
+	}
+	return err;
+}
+
+/*
+ * handle D-channel events
+ *
+ * handle state change event
+ */
+static void
+ph_state_change(struct dchannel *dch)
+{
+	struct hfc_multi *hc = dch->hw;
+	int ch, i;
+
+	if (!dch) {
+		printk(KERN_WARNING "%s: ERROR given dch is NULL\n",
+		    __func__);
+		return;
+	}
+	ch = dch->slot;
+
+	if (hc->type == 1) {
+		if (dch->dev.D.protocol == ISDN_P_TE_E1) {
+			if (debug & DEBUG_HFCMULTI_STATE)
+				printk(KERN_DEBUG
+				    "%s: E1 TE (id=%d) newstate %x\n",
+				    __func__, hc->id, dch->state);
+		} else {
+			if (debug & DEBUG_HFCMULTI_STATE)
+				printk(KERN_DEBUG
+				    "%s: E1 NT (id=%d) newstate %x\n",
+				    __func__, hc->id, dch->state);
+		}
+		switch (dch->state) {
+		case (1):
+			if (hc->e1_state != 1) {
+			    for (i = 1; i <= 31; i++) {
+				/* reset fifos on e1 activation */
+				HFC_outb_nodebug(hc, R_FIFO, (i << 1) | 1);
+				HFC_wait_nodebug(hc);
+				HFC_outb_nodebug(hc,
+					R_INC_RES_FIFO, V_RES_F);
+				HFC_wait_nodebug(hc);
+			    }
+			}
+			test_and_set_bit(FLG_ACTIVE, &dch->Flags);
+			_queue_data(&dch->dev.D, PH_ACTIVATE_IND,
+			    MISDN_ID_ANY, 0, NULL, GFP_ATOMIC);
+			break;
+
+		default:
+			if (hc->e1_state != 1)
+				return;
+			test_and_clear_bit(FLG_ACTIVE, &dch->Flags);
+			_queue_data(&dch->dev.D, PH_DEACTIVATE_IND,
+			    MISDN_ID_ANY, 0, NULL, GFP_ATOMIC);
+		}
+		hc->e1_state = dch->state;
+	} else {
+		if (dch->dev.D.protocol == ISDN_P_TE_S0) {
+			if (debug & DEBUG_HFCMULTI_STATE)
+				printk(KERN_DEBUG
+				    "%s: S/T TE newstate %x\n",
+				    __func__, dch->state);
+			switch (dch->state) {
+			case (0):
+				l1_event(dch->l1, HW_RESET_IND);
+				break;
+			case (3):
+				l1_event(dch->l1, HW_DEACT_IND);
+				break;
+			case (5):
+			case (8):
+				l1_event(dch->l1, ANYSIGNAL);
+				break;
+			case (6):
+				l1_event(dch->l1, INFO2);
+				break;
+			case (7):
+				l1_event(dch->l1, INFO4_P8);
+				break;
+			}
+		} else {
+			if (debug & DEBUG_HFCMULTI_STATE)
+				printk(KERN_DEBUG "%s: S/T NT newstate %x\n",
+				    __func__, dch->state);
+			switch (dch->state) {
+			case (2):
+				if (hc->chan[ch].nt_timer == 0) {
+					hc->chan[ch].nt_timer = -1;
+					HFC_outb(hc, R_ST_SEL,
+					    hc->chan[ch].port);
+					/* undocumented: delay after R_ST_SEL */
+					udelay(1);
+					HFC_outb(hc, A_ST_WR_STATE, 4 |
+					    V_ST_LD_STA); /* G4 */
+					udelay(6); /* wait at least 5,21us */
+					HFC_outb(hc, A_ST_WR_STATE, 4);
+					dch->state = 4;
+				} else {
+					/* one extra count for the next event */
+					hc->chan[ch].nt_timer =
+					    nt_t1_count[poll_timer] + 1;
+					HFC_outb(hc, R_ST_SEL,
+					    hc->chan[ch].port);
+					/* undocumented: delay after R_ST_SEL */
+					udelay(1);
+					/* allow G2 -> G3 transition */
+					HFC_outb(hc, A_ST_WR_STATE, 2 |
+					    V_SET_G2_G3);
+				}
+				break;
+			case (1):
+				hc->chan[ch].nt_timer = -1;
+				test_and_clear_bit(FLG_ACTIVE, &dch->Flags);
+				_queue_data(&dch->dev.D, PH_DEACTIVATE_IND,
+				    MISDN_ID_ANY, 0, NULL, GFP_ATOMIC);
+				break;
+			case (4):
+				hc->chan[ch].nt_timer = -1;
+				break;
+			case (3):
+				hc->chan[ch].nt_timer = -1;
+				test_and_set_bit(FLG_ACTIVE, &dch->Flags);
+				_queue_data(&dch->dev.D, PH_ACTIVATE_IND,
+				    MISDN_ID_ANY, 0, NULL, GFP_ATOMIC);
+				break;
+			}
+		}
+	}
+}
+
+/*
+ * called for card mode init message
+ */
+
+static void
+hfcmulti_initmode(struct dchannel *dch)
+{
+	struct hfc_multi *hc = dch->hw;
+	u_char		a_st_wr_state, r_e1_wr_sta;
+	int		i, pt;
+
+	if (debug & DEBUG_HFCMULTI_INIT)
+		printk(KERN_DEBUG "%s: entered\n", __func__);
+
+	if (hc->type == 1) {
+		hc->chan[hc->dslot].slot_tx = -1;
+		hc->chan[hc->dslot].slot_rx = -1;
+		hc->chan[hc->dslot].conf = -1;
+		if (hc->dslot) {
+			mode_hfcmulti(hc, hc->dslot, dch->dev.D.protocol,
+				-1, 0, -1, 0);
+			dch->timer.function = (void *) hfcmulti_dbusy_timer;
+			dch->timer.data = (long) dch;
+			init_timer(&dch->timer);
+		}
+		for (i = 1; i <= 31; i++) {
+			if (i == hc->dslot)
+				continue;
+			hc->chan[i].slot_tx = -1;
+			hc->chan[i].slot_rx = -1;
+			hc->chan[i].conf = -1;
+			mode_hfcmulti(hc, i, ISDN_P_NONE, -1, 0, -1, 0);
+		}
+		/* E1 */
+		if (test_bit(HFC_CFG_REPORT_LOS, &hc->chan[hc->dslot].cfg)) {
+			HFC_outb(hc, R_LOS0, 255); /* 2 ms */
+			HFC_outb(hc, R_LOS1, 255); /* 512 ms */
+		}
+		if (test_bit(HFC_CFG_OPTICAL, &hc->chan[hc->dslot].cfg)) {
+			HFC_outb(hc, R_RX0, 0);
+			hc->hw.r_tx0 = 0 | V_OUT_EN;
+		} else {
+			HFC_outb(hc, R_RX0, 1);
+			hc->hw.r_tx0 = 1 | V_OUT_EN;
+		}
+		hc->hw.r_tx1 = V_ATX | V_NTRI;
+		HFC_outb(hc, R_TX0, hc->hw.r_tx0);
+		HFC_outb(hc, R_TX1, hc->hw.r_tx1);
+		HFC_outb(hc, R_TX_FR0, 0x00);
+		HFC_outb(hc, R_TX_FR1, 0xf8);
+
+		if (test_bit(HFC_CFG_CRC4, &hc->chan[hc->dslot].cfg))
+			HFC_outb(hc, R_TX_FR2, V_TX_MF | V_TX_E | V_NEG_E);
+
+		HFC_outb(hc, R_RX_FR0, V_AUTO_RESYNC | V_AUTO_RECO | 0);
+
+		if (test_bit(HFC_CFG_CRC4, &hc->chan[hc->dslot].cfg))
+			HFC_outb(hc, R_RX_FR1, V_RX_MF | V_RX_MF_SYNC);
+
+		if (dch->dev.D.protocol == ISDN_P_NT_E1) {
+			if (debug & DEBUG_HFCMULTI_INIT)
+				printk(KERN_DEBUG "%s: E1 port is NT-mode\n",
+				    __func__);
+			r_e1_wr_sta = 0; /* G0 */
+			hc->e1_getclock = 0;
+		} else {
+			if (debug & DEBUG_HFCMULTI_INIT)
+				printk(KERN_DEBUG "%s: E1 port is TE-mode\n",
+				    __func__);
+			r_e1_wr_sta = 0; /* F0 */
+			hc->e1_getclock = 1;
+		}
+		if (test_bit(HFC_CHIP_RX_SYNC, &hc->chip))
+			HFC_outb(hc, R_SYNC_OUT, V_SYNC_E1_RX);
+		else
+			HFC_outb(hc, R_SYNC_OUT, 0);
+		if (test_bit(HFC_CHIP_E1CLOCK_GET, &hc->chip))
+			hc->e1_getclock = 1;
+		if (test_bit(HFC_CHIP_E1CLOCK_PUT, &hc->chip))
+			hc->e1_getclock = 0;
+		if (test_bit(HFC_CHIP_PCM_SLAVE, &hc->chip)) {
+			/* SLAVE (clock master) */
+			if (debug & DEBUG_HFCMULTI_INIT)
+				printk(KERN_DEBUG
+				    "%s: E1 port is clock master "
+				    "(clock from PCM)\n", __func__);
+			HFC_outb(hc, R_SYNC_CTRL, V_EXT_CLK_SYNC | V_PCM_SYNC);
+		} else {
+			if (hc->e1_getclock) {
+				/* MASTER (clock slave) */
+				if (debug & DEBUG_HFCMULTI_INIT)
+					printk(KERN_DEBUG
+					    "%s: E1 port is clock slave "
+					    "(clock to PCM)\n", __func__);
+				HFC_outb(hc, R_SYNC_CTRL, V_SYNC_OFFS);
+			} else {
+				/* MASTER (clock master) */
+				if (debug & DEBUG_HFCMULTI_INIT)
+					printk(KERN_DEBUG "%s: E1 port is "
+					    "clock master "
+					    "(clock from QUARTZ)\n",
+					    __func__);
+				HFC_outb(hc, R_SYNC_CTRL, V_EXT_CLK_SYNC |
+				    V_PCM_SYNC | V_JATT_OFF);
+				HFC_outb(hc, R_SYNC_OUT, 0);
+			}
+		}
+		HFC_outb(hc, R_JATT_ATT, 0x9c); /* undoc register */
+		HFC_outb(hc, R_PWM_MD, V_PWM0_MD);
+		HFC_outb(hc, R_PWM0, 0x50);
+		HFC_outb(hc, R_PWM1, 0xff);
+		/* state machine setup */
+		HFC_outb(hc, R_E1_WR_STA, r_e1_wr_sta | V_E1_LD_STA);
+		udelay(6); /* wait at least 5,21us */
+		HFC_outb(hc, R_E1_WR_STA, r_e1_wr_sta);
+		if (test_bit(HFC_CHIP_PLXSD, &hc->chip)) {
+			hc->syncronized = 0;
+			plxsd_checksync(hc, 0);
+		}
+	} else {
+		i = dch->slot;
+		hc->chan[i].slot_tx = -1;
+		hc->chan[i].slot_rx = -1;
+		hc->chan[i].conf = -1;
+		mode_hfcmulti(hc, i, dch->dev.D.protocol, -1, 0, -1, 0);
+		dch->timer.function = (void *)hfcmulti_dbusy_timer;
+		dch->timer.data = (long) dch;
+		init_timer(&dch->timer);
+		hc->chan[i - 2].slot_tx = -1;
+		hc->chan[i - 2].slot_rx = -1;
+		hc->chan[i - 2].conf = -1;
+		mode_hfcmulti(hc, i - 2, ISDN_P_NONE, -1, 0, -1, 0);
+		hc->chan[i - 1].slot_tx = -1;
+		hc->chan[i - 1].slot_rx = -1;
+		hc->chan[i - 1].conf = -1;
+		mode_hfcmulti(hc, i - 1, ISDN_P_NONE, -1, 0, -1, 0);
+		/* ST */
+		pt = hc->chan[i].port;
+		/* select interface */
+		HFC_outb(hc, R_ST_SEL, pt);
+		/* undocumented: delay after R_ST_SEL */
+		udelay(1);
+		if (dch->dev.D.protocol == ISDN_P_NT_S0) {
+			if (debug & DEBUG_HFCMULTI_INIT)
+				printk(KERN_DEBUG
+				    "%s: ST port %d is NT-mode\n",
+				    __func__, pt);
+			/* clock delay */
+			HFC_outb(hc, A_ST_CLK_DLY, clockdelay_nt);
+			a_st_wr_state = 1; /* G1 */
+			hc->hw.a_st_ctrl0[pt] = V_ST_MD;
+		} else {
+			if (debug & DEBUG_HFCMULTI_INIT)
+				printk(KERN_DEBUG
+				    "%s: ST port %d is TE-mode\n",
+				    __func__, pt);
+			/* clock delay */
+			HFC_outb(hc, A_ST_CLK_DLY, clockdelay_te);
+			a_st_wr_state = 2; /* F2 */
+			hc->hw.a_st_ctrl0[pt] = 0;
+		}
+		if (!test_bit(HFC_CFG_NONCAP_TX, &hc->chan[i].cfg))
+			hc->hw.a_st_ctrl0[pt] |= V_TX_LI;
+		/* line setup */
+		HFC_outb(hc, A_ST_CTRL0,  hc->hw.a_st_ctrl0[pt]);
+		/* disable E-channel */
+		if ((dch->dev.D.protocol == ISDN_P_NT_S0) ||
+		    test_bit(HFC_CFG_DIS_ECHANNEL, &hc->chan[i].cfg))
+			HFC_outb(hc, A_ST_CTRL1, V_E_IGNO);
+		else
+			HFC_outb(hc, A_ST_CTRL1, 0);
+		/* enable B-channel receive */
+		HFC_outb(hc, A_ST_CTRL2,  V_B1_RX_EN | V_B2_RX_EN);
+		/* state machine setup */
+		HFC_outb(hc, A_ST_WR_STATE, a_st_wr_state | V_ST_LD_STA);
+		udelay(6); /* wait at least 5,21us */
+		HFC_outb(hc, A_ST_WR_STATE, a_st_wr_state);
+		hc->hw.r_sci_msk |= 1 << pt;
+		/* state machine interrupts */
+		HFC_outb(hc, R_SCI_MSK, hc->hw.r_sci_msk);
+		/* unset sync on port */
+		if (test_bit(HFC_CHIP_PLXSD, &hc->chip)) {
+			hc->syncronized &=
+			   ~(1 << hc->chan[dch->slot].port);
+			plxsd_checksync(hc, 0);
+		}
+	}
+	if (debug & DEBUG_HFCMULTI_INIT)
+		printk("%s: done\n", __func__);
+}
+
+
+static int
+open_dchannel(struct hfc_multi *hc, struct dchannel *dch,
+    struct channel_req *rq)
+{
+	int	err = 0;
+	u_long	flags;
+
+	if (debug & DEBUG_HW_OPEN)
+		printk(KERN_DEBUG "%s: dev(%d) open from %p\n", __func__,
+		    dch->dev.id, __builtin_return_address(0));
+	if (rq->protocol == ISDN_P_NONE)
+		return -EINVAL;
+	if ((dch->dev.D.protocol != ISDN_P_NONE) &&
+	    (dch->dev.D.protocol != rq->protocol)) {
+	    if (debug & DEBUG_HFCMULTI_MODE)
+		printk(KERN_WARNING "%s: change protocol %x to %x\n",
+		    __func__, dch->dev.D.protocol, rq->protocol);
+	}
+	if ((dch->dev.D.protocol == ISDN_P_TE_S0)
+	 && (rq->protocol != ISDN_P_TE_S0))
+		l1_event(dch->l1, CLOSE_CHANNEL);
+	if (dch->dev.D.protocol != rq->protocol) {
+		if (rq->protocol == ISDN_P_TE_S0) {
+			err = create_l1(dch, hfcm_l1callback);
+			if (err)
+				return err;
+		}
+		dch->dev.D.protocol = rq->protocol;
+		spin_lock_irqsave(&hc->lock, flags);
+		hfcmulti_initmode(dch);
+		spin_unlock_irqrestore(&hc->lock, flags);
+	}
+
+	if (((rq->protocol == ISDN_P_NT_S0) && (dch->state == 3)) ||
+	    ((rq->protocol == ISDN_P_TE_S0) && (dch->state == 7)) ||
+	    ((rq->protocol == ISDN_P_NT_E1) && (dch->state == 1)) ||
+	    ((rq->protocol == ISDN_P_TE_E1) && (dch->state == 1))) {
+		_queue_data(&dch->dev.D, PH_ACTIVATE_IND, MISDN_ID_ANY,
+		    0, NULL, GFP_KERNEL);
+	}
+	rq->ch = &dch->dev.D;
+	if (!try_module_get(THIS_MODULE))
+		printk(KERN_WARNING "%s:cannot get module\n", __func__);
+	return 0;
+}
+
+static int
+open_bchannel(struct hfc_multi *hc, struct dchannel *dch,
+    struct channel_req *rq)
+{
+	struct bchannel	*bch;
+	int		ch;
+
+	if (!test_channelmap(rq->adr.channel, dch->dev.channelmap))
+		return -EINVAL;
+	if (rq->protocol == ISDN_P_NONE)
+		return -EINVAL;
+	if (hc->type == 1)
+		ch = rq->adr.channel;
+	else
+		ch = (rq->adr.channel - 1) + (dch->slot - 2);
+	bch = hc->chan[ch].bch;
+	if (!bch) {
+		printk(KERN_ERR "%s:internal error ch %d has no bch\n",
+		    __func__, ch);
+		return -EINVAL;
+	}
+	if (test_and_set_bit(FLG_OPEN, &bch->Flags))
+		return -EBUSY; /* b-channel can be only open once */
+	bch->ch.protocol = rq->protocol;
+	hc->chan[ch].rx_off = 0;
+	rq->ch = &bch->ch;
+	if (!try_module_get(THIS_MODULE))
+		printk(KERN_WARNING "%s:cannot get module\n", __func__);
+	return 0;
+}
+
+/*
+ * device control function
+ */
+static int
+channel_dctrl(struct dchannel *dch, struct mISDN_ctrl_req *cq)
+{
+	int	ret = 0;
+
+	switch (cq->op) {
+	case MISDN_CTRL_GETOP:
+		cq->op = 0;
+		break;
+	default:
+		printk(KERN_WARNING "%s: unknown Op %x\n",
+		    __func__, cq->op);
+		ret = -EINVAL;
+		break;
+	}
+	return ret;
+}
+
+static int
+hfcm_dctrl(struct mISDNchannel *ch, u_int cmd, void *arg)
+{
+	struct mISDNdevice	*dev = container_of(ch, struct mISDNdevice, D);
+	struct dchannel		*dch = container_of(dev, struct dchannel, dev);
+	struct hfc_multi	*hc = dch->hw;
+	struct channel_req	*rq;
+	int			err = 0;
+	u_long			flags;
+
+	if (dch->debug & DEBUG_HW)
+		printk(KERN_DEBUG "%s: cmd:%x %p\n",
+		    __func__, cmd, arg);
+	switch (cmd) {
+	case OPEN_CHANNEL:
+		rq = arg;
+		switch (rq->protocol) {
+		case ISDN_P_TE_S0:
+		case ISDN_P_NT_S0:
+			if (hc->type == 1) {
+				err = -EINVAL;
+				break;
+			}
+			err = open_dchannel(hc, dch, rq); /* locked there */
+			break;
+		case ISDN_P_TE_E1:
+		case ISDN_P_NT_E1:
+			if (hc->type != 1) {
+				err = -EINVAL;
+				break;
+			}
+			err = open_dchannel(hc, dch, rq); /* locked there */
+			break;
+		default:
+			spin_lock_irqsave(&hc->lock, flags);
+			err = open_bchannel(hc, dch, rq);
+			spin_unlock_irqrestore(&hc->lock, flags);
+		}
+		break;
+	case CLOSE_CHANNEL:
+		if (debug & DEBUG_HW_OPEN)
+			printk(KERN_DEBUG "%s: dev(%d) close from %p\n",
+			    __func__, dch->dev.id,
+			    __builtin_return_address(0));
+		module_put(THIS_MODULE);
+		break;
+	case CONTROL_CHANNEL:
+		spin_lock_irqsave(&hc->lock, flags);
+		err = channel_dctrl(dch, arg);
+		spin_unlock_irqrestore(&hc->lock, flags);
+		break;
+	default:
+		if (dch->debug & DEBUG_HW)
+			printk(KERN_DEBUG "%s: unknown command %x\n",
+			    __func__, cmd);
+		err = -EINVAL;
+	}
+	return err;
+}
+
+/*
+ * initialize the card
+ */
+
+/*
+ * start timer irq, wait some time and check if we have interrupts.
+ * if not, reset chip and try again.
+ */
+static int
+init_card(struct hfc_multi *hc)
+{
+	int	err = -EIO;
+	u_long	flags;
+	u_short	*plx_acc;
+	u_long	plx_flags;
+
+	if (debug & DEBUG_HFCMULTI_INIT)
+		printk(KERN_DEBUG "%s: entered\n", __func__);
+
+	spin_lock_irqsave(&hc->lock, flags);
+	/* set interrupts but leave global interrupt disabled */
+	hc->hw.r_irq_ctrl = V_FIFO_IRQ;
+	disable_hwirq(hc);
+	spin_unlock_irqrestore(&hc->lock, flags);
+
+	if (request_irq(hc->pci_dev->irq, hfcmulti_interrupt, IRQF_SHARED,
+	    "HFC-multi", hc)) {
+		printk(KERN_WARNING "mISDN: Could not get interrupt %d.\n",
+		    hc->pci_dev->irq);
+		return -EIO;
+	}
+	hc->irq = hc->pci_dev->irq;
+
+	if (test_bit(HFC_CHIP_PLXSD, &hc->chip)) {
+		spin_lock_irqsave(&plx_lock, plx_flags);
+		plx_acc = (u_short *)(hc->plx_membase+PLX_INTCSR);
+		writew((PLX_INTCSR_PCIINT_ENABLE | PLX_INTCSR_LINTI1_ENABLE),
+			plx_acc); /* enable PCI & LINT1 irq */
+		spin_unlock_irqrestore(&plx_lock, plx_flags);
+	}
+
+	if (debug & DEBUG_HFCMULTI_INIT)
+		printk(KERN_DEBUG "%s: IRQ %d count %d\n",
+		    __func__, hc->irq, hc->irqcnt);
+	err = init_chip(hc);
+	if (err)
+		goto error;
+	/*
+	 * Finally enable IRQ output
+	 * this is only allowed, if an IRQ routine is allready
+	 * established for this HFC, so don't do that earlier
+	 */
+	spin_lock_irqsave(&hc->lock, flags);
+	enable_hwirq(hc);
+	spin_unlock_irqrestore(&hc->lock, flags);
+	/* printk(KERN_DEBUG "no master irq set!!!\n"); */
+	set_current_state(TASK_UNINTERRUPTIBLE);
+	schedule_timeout((100*HZ)/1000); /* Timeout 100ms */
+	/* turn IRQ off until chip is completely initialized */
+	spin_lock_irqsave(&hc->lock, flags);
+	disable_hwirq(hc);
+	spin_unlock_irqrestore(&hc->lock, flags);
+	if (debug & DEBUG_HFCMULTI_INIT)
+		printk(KERN_DEBUG "%s: IRQ %d count %d\n",
+		    __func__, hc->irq, hc->irqcnt);
+	if (hc->irqcnt) {
+		if (debug & DEBUG_HFCMULTI_INIT)
+			printk(KERN_DEBUG "%s: done\n", __func__);
+
+		return 0;
+	}
+	if (test_bit(HFC_CHIP_PCM_SLAVE, &hc->chip)) {
+		printk(KERN_INFO "ignoring missing interrupts\n");
+		return 0;
+	}
+
+	printk(KERN_ERR "HFC PCI: IRQ(%d) getting no interrupts during init.\n",
+		hc->irq);
+
+	err = -EIO;
+
+error:
+	if (test_bit(HFC_CHIP_PLXSD, &hc->chip)) {
+		spin_lock_irqsave(&plx_lock, plx_flags);
+		plx_acc = (u_short *)(hc->plx_membase+PLX_INTCSR);
+		writew(0x00, plx_acc); /*disable IRQs*/
+		spin_unlock_irqrestore(&plx_lock, plx_flags);
+	}
+
+	if (debug & DEBUG_HFCMULTI_INIT)
+		printk(KERN_WARNING "%s: free irq %d\n", __func__, hc->irq);
+	if (hc->irq) {
+		free_irq(hc->irq, hc);
+		hc->irq = 0;
+	}
+
+	if (debug & DEBUG_HFCMULTI_INIT)
+		printk(KERN_DEBUG "%s: done (err=%d)\n", __func__, err);
+	return err;
+}
+
+/*
+ * find pci device and set it up
+ */
+
+static int
+setup_pci(struct hfc_multi *hc, struct pci_dev *pdev,
+		const struct pci_device_id *ent)
+{
+	struct hm_map	*m = (struct hm_map *)ent->driver_data;
+
+	printk(KERN_INFO
+	    "HFC-multi: card manufacturer: '%s' card name: '%s' clock: %s\n",
+	    m->vendor_name, m->card_name, m->clock2 ? "double" : "normal");
+
+	hc->pci_dev = pdev;
+	if (m->clock2)
+		test_and_set_bit(HFC_CHIP_CLOCK2, &hc->chip);
+
+	if (ent->device == 0xB410) {
+		test_and_set_bit(HFC_CHIP_B410P, &hc->chip);
+		test_and_set_bit(HFC_CHIP_PCM_MASTER, &hc->chip);
+		test_and_clear_bit(HFC_CHIP_PCM_SLAVE, &hc->chip);
+		hc->slots = 32;
+	}
+
+	if (hc->pci_dev->irq <= 0) {
+		printk(KERN_WARNING "HFC-multi: No IRQ for PCI card found.\n");
+		return -EIO;
+	}
+	if (pci_enable_device(hc->pci_dev)) {
+		printk(KERN_WARNING "HFC-multi: Error enabling PCI card.\n");
+		return -EIO;
+	}
+	hc->leds = m->leds;
+	hc->ledstate = 0xAFFEAFFE;
+	hc->opticalsupport = m->opticalsupport;
+
+	/* set memory access methods */
+	if (m->io_mode) /* use mode from card config */
+		hc->io_mode = m->io_mode;
+	switch (hc->io_mode) {
+	case HFC_IO_MODE_PLXSD:
+		test_and_set_bit(HFC_CHIP_PLXSD, &hc->chip);
+		hc->slots = 128; /* required */
+		/* fall through */
+	case HFC_IO_MODE_PCIMEM:
+		hc->HFC_outb = HFC_outb_pcimem;
+		hc->HFC_inb = HFC_inb_pcimem;
+		hc->HFC_inw = HFC_inw_pcimem;
+		hc->HFC_wait = HFC_wait_pcimem;
+		hc->read_fifo = read_fifo_pcimem;
+		hc->write_fifo = write_fifo_pcimem;
+		break;
+	case HFC_IO_MODE_REGIO:
+		hc->HFC_outb = HFC_outb_regio;
+		hc->HFC_inb = HFC_inb_regio;
+		hc->HFC_inw = HFC_inw_regio;
+		hc->HFC_wait = HFC_wait_regio;
+		hc->read_fifo = read_fifo_regio;
+		hc->write_fifo = write_fifo_regio;
+		break;
+	default:
+		printk(KERN_WARNING "HFC-multi: Invalid IO mode.\n");
+		pci_disable_device(hc->pci_dev);
+		return -EIO;
+	}
+	hc->HFC_outb_nodebug = hc->HFC_outb;
+	hc->HFC_inb_nodebug = hc->HFC_inb;
+	hc->HFC_inw_nodebug = hc->HFC_inw;
+	hc->HFC_wait_nodebug = hc->HFC_wait;
+#ifdef HFC_REGISTER_DEBUG
+	hc->HFC_outb = HFC_outb_debug;
+	hc->HFC_inb = HFC_inb_debug;
+	hc->HFC_inw = HFC_inw_debug;
+	hc->HFC_wait = HFC_wait_debug;
+#endif
+	hc->pci_iobase = 0;
+	hc->pci_membase = NULL;
+	hc->plx_membase = NULL;
+
+	switch (hc->io_mode) {
+	case HFC_IO_MODE_PLXSD:
+		hc->plx_origmembase =  hc->pci_dev->resource[0].start;
+		/* MEMBASE 1 is PLX PCI Bridge */
+
+		if (!hc->plx_origmembase) {
+			printk(KERN_WARNING
+			  "HFC-multi: No IO-Memory for PCI PLX bridge found\n");
+			pci_disable_device(hc->pci_dev);
+			return -EIO;
+		}
+
+		hc->plx_membase = ioremap(hc->plx_origmembase, 0x80);
+		if (!hc->plx_membase) {
+			printk(KERN_WARNING
+			    "HFC-multi: failed to remap plx address space. "
+			    "(internal error)\n");
+			pci_disable_device(hc->pci_dev);
+			return -EIO;
+		}
+		printk(KERN_INFO
+		    "HFC-multi: plx_membase:%#lx plx_origmembase:%#lx\n",
+		    (u_long)hc->plx_membase, hc->plx_origmembase);
+
+		hc->pci_origmembase =  hc->pci_dev->resource[2].start;
+		    /* MEMBASE 1 is PLX PCI Bridge */
+		if (!hc->pci_origmembase) {
+			printk(KERN_WARNING
+			    "HFC-multi: No IO-Memory for PCI card found\n");
+			pci_disable_device(hc->pci_dev);
+			return -EIO;
+		}
+
+		hc->pci_membase = ioremap(hc->pci_origmembase, 0x400);
+		if (!hc->pci_membase) {
+			printk(KERN_WARNING "HFC-multi: failed to remap io "
+			    "address space. (internal error)\n");
+			pci_disable_device(hc->pci_dev);
+			return -EIO;
+		}
+
+		printk(KERN_INFO
+		    "card %d: defined at MEMBASE %#lx (%#lx) IRQ %d HZ %d "
+		    "leds-type %d\n",
+		    hc->id, (u_long)hc->pci_membase, hc->pci_origmembase,
+		    hc->pci_dev->irq, HZ, hc->leds);
+		pci_write_config_word(hc->pci_dev, PCI_COMMAND, PCI_ENA_MEMIO);
+		break;
+	case HFC_IO_MODE_PCIMEM:
+		hc->pci_origmembase = hc->pci_dev->resource[1].start;
+		if (!hc->pci_origmembase) {
+			printk(KERN_WARNING
+			    "HFC-multi: No IO-Memory for PCI card found\n");
+			pci_disable_device(hc->pci_dev);
+			return -EIO;
+		}
+
+		hc->pci_membase = ioremap(hc->pci_origmembase, 256);
+		if (!hc->pci_membase) {
+			printk(KERN_WARNING
+			    "HFC-multi: failed to remap io address space. "
+			    "(internal error)\n");
+			pci_disable_device(hc->pci_dev);
+			return -EIO;
+		}
+		printk(KERN_INFO "card %d: defined at MEMBASE %#lx (%#lx) IRQ %d "
+		    "HZ %d leds-type %d\n", hc->id, (u_long)hc->pci_membase,
+		    hc->pci_origmembase, hc->pci_dev->irq, HZ, hc->leds);
+		pci_write_config_word(hc->pci_dev, PCI_COMMAND, PCI_ENA_MEMIO);
+		break;
+	case HFC_IO_MODE_REGIO:
+		hc->pci_iobase = (u_int) hc->pci_dev->resource[0].start;
+		if (!hc->pci_iobase) {
+			printk(KERN_WARNING
+				"HFC-multi: No IO for PCI card found\n");
+			pci_disable_device(hc->pci_dev);
+			return -EIO;
+		}
+
+		if (!request_region(hc->pci_iobase, 8, "hfcmulti")) {
+			printk(KERN_WARNING "HFC-multi: failed to request "
+			    "address space at 0x%08lx (internal error)\n",
+			    hc->pci_iobase);
+			pci_disable_device(hc->pci_dev);
+			return -EIO;
+		}
+
+		printk(KERN_INFO
+		    "%s %s: defined at IOBASE %#x IRQ %d HZ %d leds-type %d\n",
+		    m->vendor_name, m->card_name, (u_int) hc->pci_iobase,
+		    hc->pci_dev->irq, HZ, hc->leds);
+		pci_write_config_word(hc->pci_dev, PCI_COMMAND, PCI_ENA_REGIO);
+		break;
+	default:
+		printk(KERN_WARNING "HFC-multi: Invalid IO mode.\n");
+		pci_disable_device(hc->pci_dev);
+		return -EIO;
+	}
+
+	pci_set_drvdata(hc->pci_dev, hc);
+
+	/* At this point the needed PCI config is done */
+	/* fifos are still not enabled */
+	return 0;
+}
+
+
+/*
+ * remove port
+ */
+
+static void
+release_port(struct hfc_multi *hc, struct dchannel *dch)
+{
+	int	pt, ci, i = 0;
+	u_long	flags;
+	struct bchannel *pb;
+
+	ci = dch->slot;
+	pt = hc->chan[ci].port;
+
+	if (debug & DEBUG_HFCMULTI_INIT)
+		printk(KERN_DEBUG "%s: entered for port %d\n",
+			__func__, pt + 1);
+
+	if (pt >= hc->ports) {
+		printk(KERN_WARNING "%s: ERROR port out of range (%d).\n",
+		     __func__, pt + 1);
+		return;
+	}
+
+	if (debug & DEBUG_HFCMULTI_INIT)
+		printk(KERN_DEBUG "%s: releasing port=%d\n",
+		    __func__, pt + 1);
+
+	if (dch->dev.D.protocol == ISDN_P_TE_S0)
+		l1_event(dch->l1, CLOSE_CHANNEL);
+
+	hc->chan[ci].dch = NULL;
+
+	if (hc->created[pt]) {
+		hc->created[pt] = 0;
+		mISDN_unregister_device(&dch->dev);
+	}
+
+	spin_lock_irqsave(&hc->lock, flags);
+
+	if (dch->timer.function) {
+		del_timer(&dch->timer);
+		dch->timer.function = NULL;
+	}
+
+	if (hc->type == 1) { /* E1 */
+		/* remove sync */
+		if (test_bit(HFC_CHIP_PLXSD, &hc->chip)) {
+			hc->syncronized = 0;
+			plxsd_checksync(hc, 1);
+		}
+		/* free channels */
+		for (i = 0; i <= 31; i++) {
+			if (hc->chan[i].bch) {
+				if (debug & DEBUG_HFCMULTI_INIT)
+					printk(KERN_DEBUG
+					    "%s: free port %d channel %d\n",
+					    __func__, hc->chan[i].port+1, i);
+				pb = hc->chan[i].bch;
+				hc->chan[i].bch = NULL;
+				spin_unlock_irqrestore(&hc->lock, flags);
+				mISDN_freebchannel(pb);
+				kfree(pb);
+				kfree(hc->chan[i].coeff);
+				spin_lock_irqsave(&hc->lock, flags);
+			}
+		}
+	} else {
+		/* remove sync */
+		if (test_bit(HFC_CHIP_PLXSD, &hc->chip)) {
+			hc->syncronized &=
+			   ~(1 << hc->chan[ci].port);
+			plxsd_checksync(hc, 1);
+		}
+		/* free channels */
+		if (hc->chan[ci - 2].bch) {
+			if (debug & DEBUG_HFCMULTI_INIT)
+				printk(KERN_DEBUG
+				    "%s: free port %d channel %d\n",
+				    __func__, hc->chan[ci - 2].port+1,
+				    ci - 2);
+			pb = hc->chan[ci - 2].bch;
+			hc->chan[ci - 2].bch = NULL;
+			spin_unlock_irqrestore(&hc->lock, flags);
+			mISDN_freebchannel(pb);
+			kfree(pb);
+			kfree(hc->chan[ci - 2].coeff);
+			spin_lock_irqsave(&hc->lock, flags);
+		}
+		if (hc->chan[ci - 1].bch) {
+			if (debug & DEBUG_HFCMULTI_INIT)
+				printk(KERN_DEBUG
+				    "%s: free port %d channel %d\n",
+				    __func__, hc->chan[ci - 1].port+1,
+				    ci - 1);
+			pb = hc->chan[ci - 1].bch;
+			hc->chan[ci - 1].bch = NULL;
+			spin_unlock_irqrestore(&hc->lock, flags);
+			mISDN_freebchannel(pb);
+			kfree(pb);
+			kfree(hc->chan[ci - 1].coeff);
+			spin_lock_irqsave(&hc->lock, flags);
+		}
+	}
+
+	spin_unlock_irqrestore(&hc->lock, flags);
+
+	if (debug & DEBUG_HFCMULTI_INIT)
+		printk(KERN_DEBUG "%s: free port %d channel D\n", __func__, pt);
+	mISDN_freedchannel(dch);
+	kfree(dch);
+
+	if (debug & DEBUG_HFCMULTI_INIT)
+		printk(KERN_DEBUG "%s: done!\n", __func__);
+}
+
+static void
+release_card(struct hfc_multi *hc)
+{
+	u_long	flags;
+	int	ch;
+
+	if (debug & DEBUG_HFCMULTI_INIT)
+		printk(KERN_WARNING "%s: release card (%d) entered\n",
+		    __func__, hc->id);
+
+	spin_lock_irqsave(&hc->lock, flags);
+	disable_hwirq(hc);
+	spin_unlock_irqrestore(&hc->lock, flags);
+
+	udelay(1000);
+
+	/* dimm leds */
+	if (hc->leds)
+		hfcmulti_leds(hc);
+
+	/* disable D-channels & B-channels */
+	if (debug & DEBUG_HFCMULTI_INIT)
+		printk(KERN_DEBUG "%s: disable all channels (d and b)\n",
+		    __func__);
+	for (ch = 0; ch <= 31; ch++) {
+		if (hc->chan[ch].dch)
+			release_port(hc, hc->chan[ch].dch);
+	}
+
+	/* release hardware & irq */
+	if (hc->irq) {
+		if (debug & DEBUG_HFCMULTI_INIT)
+			printk(KERN_WARNING "%s: free irq %d\n",
+			    __func__, hc->irq);
+		free_irq(hc->irq, hc);
+		hc->irq = 0;
+
+	}
+	release_io_hfcmulti(hc);
+
+	if (debug & DEBUG_HFCMULTI_INIT)
+		printk(KERN_WARNING "%s: remove instance from list\n",
+		     __func__);
+	list_del(&hc->list);
+
+	if (debug & DEBUG_HFCMULTI_INIT)
+		printk(KERN_WARNING "%s: delete instance\n", __func__);
+	if (hc == syncmaster)
+		syncmaster = NULL;
+	kfree(hc);
+	if (debug & DEBUG_HFCMULTI_INIT)
+		printk(KERN_WARNING "%s: card successfully removed\n",
+		    __func__);
+}
+
+static int
+init_e1_port(struct hfc_multi *hc, struct hm_map *m)
+{
+	struct dchannel	*dch;
+	struct bchannel	*bch;
+	int		ch, ret = 0;
+	char		name[MISDN_MAX_IDLEN];
+
+	dch = kzalloc(sizeof(struct dchannel), GFP_KERNEL);
+	if (!dch)
+		return -ENOMEM;
+	dch->debug = debug;
+	mISDN_initdchannel(dch, MAX_DFRAME_LEN_L1, ph_state_change);
+	dch->hw = hc;
+	dch->dev.Dprotocols = (1 << ISDN_P_TE_E1) | (1 << ISDN_P_NT_E1);
+	dch->dev.Bprotocols = (1 << (ISDN_P_B_RAW & ISDN_P_B_MASK)) |
+	    (1 << (ISDN_P_B_HDLC & ISDN_P_B_MASK));
+	dch->dev.D.send = handle_dmsg;
+	dch->dev.D.ctrl = hfcm_dctrl;
+	dch->dev.nrbchan = (hc->dslot)?30:31;
+	dch->slot = hc->dslot;
+	hc->chan[hc->dslot].dch = dch;
+	hc->chan[hc->dslot].port = 0;
+	hc->chan[hc->dslot].nt_timer = -1;
+	for (ch = 1; ch <= 31; ch++) {
+		if (ch == hc->dslot) /* skip dchannel */
+			continue;
+		bch = kzalloc(sizeof(struct bchannel), GFP_KERNEL);
+		if (!bch) {
+			printk(KERN_ERR "%s: no memory for bchannel\n",
+			    __func__);
+			ret = -ENOMEM;
+			goto free_chan;
+		}
+		hc->chan[ch].coeff = kzalloc(512, GFP_KERNEL);
+		if (!hc->chan[ch].coeff) {
+			printk(KERN_ERR "%s: no memory for coeffs\n",
+			    __func__);
+			ret = -ENOMEM;
+			goto free_chan;
+		}
+		bch->nr = ch;
+		bch->slot = ch;
+		bch->debug = debug;
+		mISDN_initbchannel(bch, MAX_DATA_MEM);
+		bch->hw = hc;
+		bch->ch.send = handle_bmsg;
+		bch->ch.ctrl = hfcm_bctrl;
+		bch->ch.nr = ch;
+		list_add(&bch->ch.list, &dch->dev.bchannels);
+		hc->chan[ch].bch = bch;
+		hc->chan[ch].port = 0;
+		set_channelmap(bch->nr, dch->dev.channelmap);
+	}
+	/* set optical line type */
+	if (port[Port_cnt] & 0x001) {
+		if (!m->opticalsupport)  {
+			printk(KERN_INFO
+			    "This board has no optical "
+			    "support\n");
+		} else {
+			if (debug & DEBUG_HFCMULTI_INIT)
+				printk(KERN_DEBUG
+				    "%s: PORT set optical "
+				    "interfacs: card(%d) "
+				    "port(%d)\n",
+				    __func__,
+				    HFC_cnt + 1, 1);
+			test_and_set_bit(HFC_CFG_OPTICAL,
+			    &hc->chan[hc->dslot].cfg);
+		}
+	}
+	/* set LOS report */
+	if (port[Port_cnt] & 0x004) {
+		if (debug & DEBUG_HFCMULTI_INIT)
+			printk(KERN_DEBUG "%s: PORT set "
+			    "LOS report: card(%d) port(%d)\n",
+			    __func__, HFC_cnt + 1, 1);
+		test_and_set_bit(HFC_CFG_REPORT_LOS,
+		    &hc->chan[hc->dslot].cfg);
+	}
+	/* set AIS report */
+	if (port[Port_cnt] & 0x008) {
+		if (debug & DEBUG_HFCMULTI_INIT)
+			printk(KERN_DEBUG "%s: PORT set "
+			    "AIS report: card(%d) port(%d)\n",
+			    __func__, HFC_cnt + 1, 1);
+		test_and_set_bit(HFC_CFG_REPORT_AIS,
+		    &hc->chan[hc->dslot].cfg);
+	}
+	/* set SLIP report */
+	if (port[Port_cnt] & 0x010) {
+		if (debug & DEBUG_HFCMULTI_INIT)
+			printk(KERN_DEBUG
+			    "%s: PORT set SLIP report: "
+			    "card(%d) port(%d)\n",
+			    __func__, HFC_cnt + 1, 1);
+		test_and_set_bit(HFC_CFG_REPORT_SLIP,
+		    &hc->chan[hc->dslot].cfg);
+	}
+	/* set RDI report */
+	if (port[Port_cnt] & 0x020) {
+		if (debug & DEBUG_HFCMULTI_INIT)
+			printk(KERN_DEBUG
+			    "%s: PORT set RDI report: "
+			    "card(%d) port(%d)\n",
+			    __func__, HFC_cnt + 1, 1);
+		test_and_set_bit(HFC_CFG_REPORT_RDI,
+		    &hc->chan[hc->dslot].cfg);
+	}
+	/* set CRC-4 Mode */
+	if (!(port[Port_cnt] & 0x100)) {
+		if (debug & DEBUG_HFCMULTI_INIT)
+			printk(KERN_DEBUG "%s: PORT turn on CRC4 report:"
+				" card(%d) port(%d)\n",
+				__func__, HFC_cnt + 1, 1);
+		test_and_set_bit(HFC_CFG_CRC4,
+		    &hc->chan[hc->dslot].cfg);
+	} else {
+		if (debug & DEBUG_HFCMULTI_INIT)
+			printk(KERN_DEBUG "%s: PORT turn off CRC4"
+				" report: card(%d) port(%d)\n",
+				__func__, HFC_cnt + 1, 1);
+	}
+	/* set forced clock */
+	if (port[Port_cnt] & 0x0200) {
+		if (debug & DEBUG_HFCMULTI_INIT)
+			printk(KERN_DEBUG "%s: PORT force getting clock from "
+				"E1: card(%d) port(%d)\n",
+				__func__, HFC_cnt + 1, 1);
+		test_and_set_bit(HFC_CHIP_E1CLOCK_GET, &hc->chip);
+	} else
+	if (port[Port_cnt] & 0x0400) {
+		if (debug & DEBUG_HFCMULTI_INIT)
+			printk(KERN_DEBUG "%s: PORT force putting clock to "
+				"E1: card(%d) port(%d)\n",
+				__func__, HFC_cnt + 1, 1);
+		test_and_set_bit(HFC_CHIP_E1CLOCK_PUT, &hc->chip);
+	}
+	/* set JATT PLL */
+	if (port[Port_cnt] & 0x0800) {
+		if (debug & DEBUG_HFCMULTI_INIT)
+			printk(KERN_DEBUG "%s: PORT disable JATT PLL on "
+				"E1: card(%d) port(%d)\n",
+				__func__, HFC_cnt + 1, 1);
+		test_and_set_bit(HFC_CHIP_RX_SYNC, &hc->chip);
+	}
+	/* set elastic jitter buffer */
+	if (port[Port_cnt] & 0x3000) {
+		hc->chan[hc->dslot].jitter = (port[Port_cnt]>>12) & 0x3;
+		if (debug & DEBUG_HFCMULTI_INIT)
+			printk(KERN_DEBUG
+			    "%s: PORT set elastic "
+			    "buffer to %d: card(%d) port(%d)\n",
+			    __func__, hc->chan[hc->dslot].jitter,
+			    HFC_cnt + 1, 1);
+	} else
+		hc->chan[hc->dslot].jitter = 2; /* default */
+	snprintf(name, MISDN_MAX_IDLEN - 1, "hfc-e1.%d", HFC_cnt + 1);
+	ret = mISDN_register_device(&dch->dev, name);
+	if (ret)
+		goto free_chan;
+	hc->created[0] = 1;
+	return ret;
+free_chan:
+	release_port(hc, dch);
+	return ret;
+}
+
+static int
+init_multi_port(struct hfc_multi *hc, int pt)
+{
+	struct dchannel	*dch;
+	struct bchannel	*bch;
+	int		ch, i, ret = 0;
+	char		name[MISDN_MAX_IDLEN];
+
+	dch = kzalloc(sizeof(struct dchannel), GFP_KERNEL);
+	if (!dch)
+		return -ENOMEM;
+	dch->debug = debug;
+	mISDN_initdchannel(dch, MAX_DFRAME_LEN_L1, ph_state_change);
+	dch->hw = hc;
+	dch->dev.Dprotocols = (1 << ISDN_P_TE_S0) | (1 << ISDN_P_NT_S0);
+	dch->dev.Bprotocols = (1 << (ISDN_P_B_RAW & ISDN_P_B_MASK)) |
+	    (1 << (ISDN_P_B_HDLC & ISDN_P_B_MASK));
+	dch->dev.D.send = handle_dmsg;
+	dch->dev.D.ctrl = hfcm_dctrl;
+	dch->dev.nrbchan = 2;
+	i = pt << 2;
+	dch->slot = i + 2;
+	hc->chan[i + 2].dch = dch;
+	hc->chan[i + 2].port = pt;
+	hc->chan[i + 2].nt_timer = -1;
+	for (ch = 0; ch < dch->dev.nrbchan; ch++) {
+		bch = kzalloc(sizeof(struct bchannel), GFP_KERNEL);
+		if (!bch) {
+			printk(KERN_ERR "%s: no memory for bchannel\n",
+			    __func__);
+			ret = -ENOMEM;
+			goto free_chan;
+		}
+		hc->chan[i + ch].coeff = kzalloc(512, GFP_KERNEL);
+		if (!hc->chan[i + ch].coeff) {
+			printk(KERN_ERR "%s: no memory for coeffs\n",
+			    __func__);
+			ret = -ENOMEM;
+			goto free_chan;
+		}
+		bch->nr = ch + 1;
+		bch->slot = i + ch;
+		bch->debug = debug;
+		mISDN_initbchannel(bch, MAX_DATA_MEM);
+		bch->hw = hc;
+		bch->ch.send = handle_bmsg;
+		bch->ch.ctrl = hfcm_bctrl;
+		bch->ch.nr = ch + 1;
+		list_add(&bch->ch.list, &dch->dev.bchannels);
+		hc->chan[i + ch].bch = bch;
+		hc->chan[i + ch].port = pt;
+		set_channelmap(bch->nr, dch->dev.channelmap);
+	}
+	/* set master clock */
+	if (port[Port_cnt] & 0x001) {
+		if (debug & DEBUG_HFCMULTI_INIT)
+			printk(KERN_DEBUG
+			    "%s: PROTOCOL set master clock: "
+			    "card(%d) port(%d)\n",
+			    __func__, HFC_cnt + 1, pt + 1);
+		if (dch->dev.D.protocol != ISDN_P_TE_S0) {
+			printk(KERN_ERR "Error: Master clock "
+			    "for port(%d) of card(%d) is only"
+			    " possible with TE-mode\n",
+			    pt + 1, HFC_cnt + 1);
+			ret = -EINVAL;
+			goto free_chan;
+		}
+		if (hc->masterclk >= 0) {
+			printk(KERN_ERR "Error: Master clock "
+			    "for port(%d) of card(%d) already "
+			    "defined for port(%d)\n",
+			    pt + 1, HFC_cnt + 1, hc->masterclk+1);
+			ret = -EINVAL;
+			goto free_chan;
+		}
+		hc->masterclk = pt;
+	}
+	/* set transmitter line to non capacitive */
+	if (port[Port_cnt] & 0x002) {
+		if (debug & DEBUG_HFCMULTI_INIT)
+			printk(KERN_DEBUG
+			    "%s: PROTOCOL set non capacitive "
+			    "transmitter: card(%d) port(%d)\n",
+			    __func__, HFC_cnt + 1, pt + 1);
+		test_and_set_bit(HFC_CFG_NONCAP_TX,
+		    &hc->chan[i + 2].cfg);
+	}
+	/* disable E-channel */
+	if (port[Port_cnt] & 0x004) {
+	if (debug & DEBUG_HFCMULTI_INIT)
+			printk(KERN_DEBUG
+			    "%s: PROTOCOL disable E-channel: "
+			    "card(%d) port(%d)\n",
+			    __func__, HFC_cnt + 1, pt + 1);
+		test_and_set_bit(HFC_CFG_DIS_ECHANNEL,
+		    &hc->chan[i + 2].cfg);
+	}
+	snprintf(name, MISDN_MAX_IDLEN - 1, "hfc-%ds.%d/%d",
+		hc->type, HFC_cnt + 1, pt + 1);
+	ret = mISDN_register_device(&dch->dev, name);
+	if (ret)
+		goto free_chan;
+	hc->created[pt] = 1;
+	return ret;
+free_chan:
+	release_port(hc, dch);
+	return ret;
+}
+
+static int
+hfcmulti_init(struct pci_dev *pdev, const struct pci_device_id *ent)
+{
+	struct hm_map	*m = (struct hm_map *)ent->driver_data;
+	int		ret_err = 0;
+	int		pt;
+	struct hfc_multi	*hc;
+	u_long		flags;
+	u_char		dips = 0, pmj = 0; /* dip settings, port mode Jumpers */
+
+	if (HFC_cnt >= MAX_CARDS) {
+		printk(KERN_ERR "too many cards (max=%d).\n",
+			MAX_CARDS);
+		return -EINVAL;
+	}
+	if ((type[HFC_cnt] & 0xff) && (type[HFC_cnt] & 0xff) != m->type) {
+		printk(KERN_WARNING "HFC-MULTI: Card '%s:%s' type %d found but "
+		    "type[%d] %d was supplied as module parameter\n",
+		    m->vendor_name, m->card_name, m->type, HFC_cnt,
+		    type[HFC_cnt] & 0xff);
+		printk(KERN_WARNING "HFC-MULTI: Load module without parameters "
+			"first, to see cards and their types.");
+		return -EINVAL;
+	}
+	if (debug & DEBUG_HFCMULTI_INIT)
+		printk(KERN_DEBUG "%s: Registering %s:%s chip type %d (0x%x)\n",
+		    __func__, m->vendor_name, m->card_name, m->type,
+		    type[HFC_cnt]);
+
+	/* allocate card+fifo structure */
+	hc = kzalloc(sizeof(struct hfc_multi), GFP_KERNEL);
+	if (!hc) {
+		printk(KERN_ERR "No kmem for HFC-Multi card\n");
+		return -ENOMEM;
+	}
+	spin_lock_init(&hc->lock);
+	hc->mtyp = m;
+	hc->type =  m->type;
+	hc->ports = m->ports;
+	hc->id = HFC_cnt;
+	hc->pcm = pcm[HFC_cnt];
+	hc->io_mode = iomode[HFC_cnt];
+	if (dslot[HFC_cnt] < 0) {
+		hc->dslot = 0;
+		printk(KERN_INFO "HFC-E1 card has disabled D-channel, but "
+			"31 B-channels\n");
+	} if (dslot[HFC_cnt] > 0 && dslot[HFC_cnt] < 32) {
+		hc->dslot = dslot[HFC_cnt];
+		printk(KERN_INFO "HFC-E1 card has alternating D-channel on "
+			"time slot %d\n", dslot[HFC_cnt]);
+	} else
+		hc->dslot = 16;
+
+	/* set chip specific features */
+	hc->masterclk = -1;
+	if (type[HFC_cnt] & 0x100) {
+		test_and_set_bit(HFC_CHIP_ULAW, &hc->chip);
+		silence = 0xff; /* ulaw silence */
+	} else
+		silence = 0x2a; /* alaw silence */
+	if (!(type[HFC_cnt] & 0x200))
+		test_and_set_bit(HFC_CHIP_DTMF, &hc->chip);
+
+	if (type[HFC_cnt] & 0x800)
+		test_and_set_bit(HFC_CHIP_PCM_SLAVE, &hc->chip);
+	if (type[HFC_cnt] & 0x1000) {
+		test_and_set_bit(HFC_CHIP_PCM_MASTER, &hc->chip);
+		test_and_clear_bit(HFC_CHIP_PCM_SLAVE, &hc->chip);
+	}
+	if (type[HFC_cnt] & 0x4000)
+		test_and_set_bit(HFC_CHIP_EXRAM_128, &hc->chip);
+	if (type[HFC_cnt] & 0x8000)
+		test_and_set_bit(HFC_CHIP_EXRAM_512, &hc->chip);
+	hc->slots = 32;
+	if (type[HFC_cnt] & 0x10000)
+		hc->slots = 64;
+	if (type[HFC_cnt] & 0x20000)
+		hc->slots = 128;
+	if (type[HFC_cnt] & 0x80000) {
+		test_and_set_bit(HFC_CHIP_WATCHDOG, &hc->chip);
+		hc->wdcount = 0;
+		hc->wdbyte = V_GPIO_OUT2;
+		printk(KERN_NOTICE "Watchdog enabled\n");
+	}
+
+	/* setup pci, hc->slots may change due to PLXSD */
+	ret_err = setup_pci(hc, pdev, ent);
+	if (ret_err) {
+		if (hc == syncmaster)
+			syncmaster = NULL;
+		kfree(hc);
+		return ret_err;
+	}
+
+	/* crate channels */
+	for (pt = 0; pt < hc->ports; pt++) {
+		if (Port_cnt >= MAX_PORTS) {
+			printk(KERN_ERR "too many ports (max=%d).\n",
+				MAX_PORTS);
+			ret_err = -EINVAL;
+			goto free_card;
+		}
+		if (hc->type == 1)
+			ret_err = init_e1_port(hc, m);
+		else
+			ret_err = init_multi_port(hc, pt);
+		if (debug & DEBUG_HFCMULTI_INIT)
+			printk(KERN_DEBUG
+			    "%s: Registering D-channel, card(%d) port(%d)"
+			    "result %d\n",
+			    __func__, HFC_cnt + 1, pt, ret_err);
+
+		if (ret_err) {
+			while (pt) { /* release already registered ports */
+				pt--;
+				release_port(hc, hc->chan[(pt << 2) + 2].dch);
+			}
+			goto free_card;
+		}
+		Port_cnt++;
+	}
+
+	/* disp switches */
+	switch (m->dip_type) {
+	case DIP_4S:
+		/*
+		 * get DIP Setting for beroNet 1S/2S/4S cards
+		 *  check if Port Jumper config matches
+		 * module param 'protocol'
+		 * DIP Setting: (collect GPIO 13/14/15 (R_GPIO_IN1) +
+		 * GPI 19/23 (R_GPI_IN2))
+		 */
+		dips = ((~HFC_inb(hc, R_GPIO_IN1) & 0xE0) >> 5) |
+			((~HFC_inb(hc, R_GPI_IN2) & 0x80) >> 3) |
+			(~HFC_inb(hc, R_GPI_IN2) & 0x08);
+
+		/* Port mode (TE/NT) jumpers */
+		pmj = ((HFC_inb(hc, R_GPI_IN3) >> 4)  & 0xf);
+
+		if (test_bit(HFC_CHIP_B410P, &hc->chip))
+			pmj = ~pmj & 0xf;
+
+		printk(KERN_INFO "%s: %s DIPs(0x%x) jumpers(0x%x)\n",
+			m->vendor_name, m->card_name, dips, pmj);
+		break;
+	case DIP_8S:
+		/*
+		 * get DIP Setting for beroNet 8S0+ cards
+		 *
+		 * enable PCI auxbridge function
+		 */
+		HFC_outb(hc, R_BRG_PCM_CFG, 1 | V_PCM_CLK);
+		/* prepare access to auxport */
+		outw(0x4000, hc->pci_iobase + 4);
+		/*
+		 * some dummy reads are required to
+		 * read valid DIP switch data
+		 */
+		dips = inb(hc->pci_iobase);
+		dips = inb(hc->pci_iobase);
+		dips = inb(hc->pci_iobase);
+		dips = ~inb(hc->pci_iobase) & 0x3F;
+		outw(0x0, hc->pci_iobase + 4);
+		/* disable PCI auxbridge function */
+		HFC_outb(hc, R_BRG_PCM_CFG, V_PCM_CLK);
+		printk(KERN_INFO "%s: %s DIPs(0x%x)\n",
+		    m->vendor_name, m->card_name, dips);
+		break;
+	case DIP_E1:
+		/*
+		 * get DIP Setting for beroNet E1 cards
+		 * DIP Setting: collect GPI 4/5/6/7 (R_GPI_IN0)
+		 */
+		dips = (~HFC_inb(hc, R_GPI_IN0) & 0xF0)>>4;
+		printk(KERN_INFO "%s: %s DIPs(0x%x)\n",
+		    m->vendor_name, m->card_name, dips);
+		break;
+	}
+
+	/* add to list */
+	spin_lock_irqsave(&HFClock, flags);
+	list_add_tail(&hc->list, &HFClist);
+	spin_unlock_irqrestore(&HFClock, flags);
+
+	/* initialize hardware */
+	ret_err = init_card(hc);
+	if (ret_err) {
+		printk(KERN_ERR "init card returns %d\n", ret_err);
+		release_card(hc);
+		return ret_err;
+	}
+
+	/* start IRQ and return */
+	spin_lock_irqsave(&hc->lock, flags);
+	enable_hwirq(hc);
+	spin_unlock_irqrestore(&hc->lock, flags);
+	return 0;
+
+free_card:
+	release_io_hfcmulti(hc);
+	if (hc == syncmaster)
+		syncmaster = NULL;
+	kfree(hc);
+	return ret_err;
+}
+
+static void __devexit hfc_remove_pci(struct pci_dev *pdev)
+{
+	struct hfc_multi	*card = pci_get_drvdata(pdev);
+	u_long			flags;
+
+	if (debug)
+		printk(KERN_INFO "removing hfc_multi card vendor:%x "
+		    "device:%x subvendor:%x subdevice:%x\n",
+		    pdev->vendor, pdev->device,
+		    pdev->subsystem_vendor, pdev->subsystem_device);
+
+	if (card) {
+		spin_lock_irqsave(&HFClock, flags);
+		release_card(card);
+		spin_unlock_irqrestore(&HFClock, flags);
+	}  else {
+		if (debug)
+			printk(KERN_WARNING "%s: drvdata allready removed\n",
+			    __func__);
+	}
+}
+
+#define	VENDOR_CCD	"Cologne Chip AG"
+#define	VENDOR_BN	"beroNet GmbH"
+#define	VENDOR_DIG	"Digium Inc."
+#define VENDOR_JH	"Junghanns.NET GmbH"
+#define VENDOR_PRIM	"PrimuX"
+
+static const struct hm_map hfcm_map[] = {
+/*0*/	{VENDOR_BN, "HFC-1S Card (mini PCI)", 4, 1, 1, 3, 0, DIP_4S, 0},
+/*1*/	{VENDOR_BN, "HFC-2S Card", 4, 2, 1, 3, 0, DIP_4S, 0},
+/*2*/	{VENDOR_BN, "HFC-2S Card (mini PCI)", 4, 2, 1, 3, 0, DIP_4S, 0},
+/*3*/	{VENDOR_BN, "HFC-4S Card", 4, 4, 1, 2, 0, DIP_4S, 0},
+/*4*/	{VENDOR_BN, "HFC-4S Card (mini PCI)", 4, 4, 1, 2, 0, 0, 0},
+/*5*/	{VENDOR_CCD, "HFC-4S Eval (old)", 4, 4, 0, 0, 0, 0, 0},
+/*6*/	{VENDOR_CCD, "HFC-4S IOB4ST", 4, 4, 1, 2, 0, DIP_4S, 0},
+/*7*/	{VENDOR_CCD, "HFC-4S", 4, 4, 1, 2, 0, 0, 0},
+/*8*/	{VENDOR_DIG, "HFC-4S Card", 4, 4, 0, 2, 0, 0, HFC_IO_MODE_REGIO},
+/*9*/	{VENDOR_CCD, "HFC-4S Swyx 4xS0 SX2 QuadBri", 4, 4, 1, 2, 0, 0, 0},
+/*10*/	{VENDOR_JH, "HFC-4S (junghanns 2.0)", 4, 4, 1, 2, 0, 0, 0},
+/*11*/	{VENDOR_PRIM, "HFC-2S Primux Card", 4, 2, 0, 0, 0, 0, 0},
+
+/*12*/	{VENDOR_BN, "HFC-8S Card", 8, 8, 1, 0, 0, 0, 0},
+/*13*/	{VENDOR_BN, "HFC-8S Card (+)", 8, 8, 1, 8, 0, DIP_8S,
+		HFC_IO_MODE_REGIO},
+/*14*/	{VENDOR_CCD, "HFC-8S Eval (old)", 8, 8, 0, 0, 0, 0, 0},
+/*15*/	{VENDOR_CCD, "HFC-8S IOB4ST Recording", 8, 8, 1, 0, 0, 0, 0},
+
+/*16*/	{VENDOR_CCD, "HFC-8S IOB8ST", 8, 8, 1, 0, 0, 0, 0},
+/*17*/	{VENDOR_CCD, "HFC-8S", 8, 8, 1, 0, 0, 0, 0},
+/*18*/	{VENDOR_CCD, "HFC-8S", 8, 8, 1, 0, 0, 0, 0},
+
+/*19*/	{VENDOR_BN, "HFC-E1 Card", 1, 1, 0, 1, 0, DIP_E1, 0},
+/*20*/	{VENDOR_BN, "HFC-E1 Card (mini PCI)", 1, 1, 0, 1, 0, 0, 0},
+/*21*/	{VENDOR_BN, "HFC-E1+ Card (Dual)", 1, 1, 0, 1, 0, DIP_E1, 0},
+/*22*/	{VENDOR_BN, "HFC-E1 Card (Dual)", 1, 1, 0, 1, 0, DIP_E1, 0},
+
+/*23*/	{VENDOR_CCD, "HFC-E1 Eval (old)", 1, 1, 0, 0, 0, 0, 0},
+/*24*/	{VENDOR_CCD, "HFC-E1 IOB1E1", 1, 1, 0, 1, 0, 0, 0},
+/*25*/	{VENDOR_CCD, "HFC-E1", 1, 1, 0, 1, 0, 0, 0},
+
+/*26*/	{VENDOR_CCD, "HFC-4S Speech Design", 4, 4, 0, 0, 0, 0,
+		HFC_IO_MODE_PLXSD},
+/*27*/	{VENDOR_CCD, "HFC-E1 Speech Design", 1, 1, 0, 0, 0, 0,
+		HFC_IO_MODE_PLXSD},
+/*28*/	{VENDOR_CCD, "HFC-4S OpenVox", 4, 4, 1, 0, 0, 0, 0},
+/*29*/	{VENDOR_CCD, "HFC-2S OpenVox", 4, 2, 1, 0, 0, 0, 0},
+/*30*/	{VENDOR_CCD, "HFC-8S OpenVox", 8, 8, 1, 0, 0, 0, 0},
+};
+
+#undef H
+#define H(x)	((unsigned long)&hfcm_map[x])
+static struct pci_device_id hfmultipci_ids[] __devinitdata = {
+
+	/* Cards with HFC-4S Chip */
+	{ PCI_VENDOR_ID_CCD, PCI_DEVICE_ID_CCD_HFC4S, PCI_VENDOR_ID_CCD,
+		PCI_SUBDEVICE_ID_CCD_BN1SM, 0, 0, H(0)}, /* BN1S mini PCI */
+	{ PCI_VENDOR_ID_CCD, PCI_DEVICE_ID_CCD_HFC4S, PCI_VENDOR_ID_CCD,
+		PCI_SUBDEVICE_ID_CCD_BN2S, 0, 0, H(1)}, /* BN2S */
+	{ PCI_VENDOR_ID_CCD, PCI_DEVICE_ID_CCD_HFC4S, PCI_VENDOR_ID_CCD,
+		PCI_SUBDEVICE_ID_CCD_BN2SM, 0, 0, H(2)}, /* BN2S mini PCI */
+	{ PCI_VENDOR_ID_CCD, PCI_DEVICE_ID_CCD_HFC4S, PCI_VENDOR_ID_CCD,
+		PCI_SUBDEVICE_ID_CCD_BN4S, 0, 0, H(3)}, /* BN4S */
+	{ PCI_VENDOR_ID_CCD, PCI_DEVICE_ID_CCD_HFC4S, PCI_VENDOR_ID_CCD,
+		PCI_SUBDEVICE_ID_CCD_BN4SM, 0, 0, H(4)}, /* BN4S mini PCI */
+	{ PCI_VENDOR_ID_CCD, PCI_DEVICE_ID_CCD_HFC4S, PCI_VENDOR_ID_CCD,
+		PCI_DEVICE_ID_CCD_HFC4S, 0, 0, H(5)}, /* Old Eval */
+	{ PCI_VENDOR_ID_CCD, PCI_DEVICE_ID_CCD_HFC4S, PCI_VENDOR_ID_CCD,
+		PCI_SUBDEVICE_ID_CCD_IOB4ST, 0, 0, H(6)}, /* IOB4ST */
+	{ PCI_VENDOR_ID_CCD, PCI_DEVICE_ID_CCD_HFC4S, PCI_VENDOR_ID_CCD,
+		PCI_SUBDEVICE_ID_CCD_HFC4S, 0, 0, H(7)}, /* 4S */
+	{ PCI_VENDOR_ID_DIGIUM, PCI_DEVICE_ID_DIGIUM_HFC4S,
+		PCI_VENDOR_ID_DIGIUM, PCI_DEVICE_ID_DIGIUM_HFC4S, 0, 0, H(8)},
+	{ PCI_VENDOR_ID_CCD, PCI_DEVICE_ID_CCD_HFC4S, PCI_VENDOR_ID_CCD,
+		PCI_SUBDEVICE_ID_CCD_SWYX4S, 0, 0, H(9)}, /* 4S Swyx */
+	{ PCI_VENDOR_ID_CCD, PCI_DEVICE_ID_CCD_HFC4S, PCI_VENDOR_ID_CCD,
+		PCI_SUBDEVICE_ID_CCD_JH4S20, 0, 0, H(10)},
+	{ PCI_VENDOR_ID_CCD, PCI_DEVICE_ID_CCD_HFC4S, PCI_VENDOR_ID_CCD,
+		PCI_SUBDEVICE_ID_CCD_PMX2S, 0, 0, H(11)}, /* Primux */
+	{ PCI_VENDOR_ID_CCD, PCI_DEVICE_ID_CCD_HFC4S, PCI_VENDOR_ID_CCD,
+		PCI_SUBDEVICE_ID_CCD_OV4S, 0, 0, H(28)}, /* OpenVox 4 */
+	{ PCI_VENDOR_ID_CCD, PCI_DEVICE_ID_CCD_HFC4S, PCI_VENDOR_ID_CCD,
+		PCI_SUBDEVICE_ID_CCD_OV2S, 0, 0, H(29)}, /* OpenVox 2 */
+
+	/* Cards with HFC-8S Chip */
+	{ PCI_VENDOR_ID_CCD, PCI_DEVICE_ID_CCD_HFC8S, PCI_VENDOR_ID_CCD,
+	PCI_SUBDEVICE_ID_CCD_BN8S, 0, 0, H(12)}, /* BN8S */
+	{ PCI_VENDOR_ID_CCD, PCI_DEVICE_ID_CCD_HFC8S, PCI_VENDOR_ID_CCD,
+	PCI_SUBDEVICE_ID_CCD_BN8SP, 0, 0, H(13)}, /* BN8S+ */
+	{ PCI_VENDOR_ID_CCD, PCI_DEVICE_ID_CCD_HFC8S, PCI_VENDOR_ID_CCD,
+	PCI_DEVICE_ID_CCD_HFC8S, 0, 0, H(14)}, /* old Eval */
+	{ PCI_VENDOR_ID_CCD, PCI_DEVICE_ID_CCD_HFC8S, PCI_VENDOR_ID_CCD,
+	PCI_SUBDEVICE_ID_CCD_IOB8STR, 0, 0, H(15)},
+	    /* IOB8ST Recording */
+	{ PCI_VENDOR_ID_CCD, PCI_DEVICE_ID_CCD_HFC8S, PCI_VENDOR_ID_CCD,
+		PCI_SUBDEVICE_ID_CCD_IOB8ST, 0, 0, H(16)}, /* IOB8ST  */
+	{ PCI_VENDOR_ID_CCD, PCI_DEVICE_ID_CCD_HFC8S, PCI_VENDOR_ID_CCD,
+		PCI_SUBDEVICE_ID_CCD_IOB8ST_1, 0, 0, H(17)}, /* IOB8ST  */
+	{ PCI_VENDOR_ID_CCD, PCI_DEVICE_ID_CCD_HFC8S, PCI_VENDOR_ID_CCD,
+		PCI_SUBDEVICE_ID_CCD_HFC8S, 0, 0, H(18)}, /* 8S */
+	{ PCI_VENDOR_ID_CCD, PCI_DEVICE_ID_CCD_HFC8S, PCI_VENDOR_ID_CCD,
+		PCI_SUBDEVICE_ID_CCD_OV8S, 0, 0, H(30)}, /* OpenVox 8 */
+
+
+	/* Cards with HFC-E1 Chip */
+	{ PCI_VENDOR_ID_CCD, PCI_DEVICE_ID_CCD_HFCE1, PCI_VENDOR_ID_CCD,
+		PCI_SUBDEVICE_ID_CCD_BNE1, 0, 0, H(19)}, /* BNE1 */
+	{ PCI_VENDOR_ID_CCD, PCI_DEVICE_ID_CCD_HFCE1, PCI_VENDOR_ID_CCD,
+		PCI_SUBDEVICE_ID_CCD_BNE1M, 0, 0, H(20)}, /* BNE1 mini PCI */
+	{ PCI_VENDOR_ID_CCD, PCI_DEVICE_ID_CCD_HFCE1, PCI_VENDOR_ID_CCD,
+		PCI_SUBDEVICE_ID_CCD_BNE1DP, 0, 0, H(21)}, /* BNE1 + (Dual) */
+	{ PCI_VENDOR_ID_CCD, PCI_DEVICE_ID_CCD_HFCE1, PCI_VENDOR_ID_CCD,
+		PCI_SUBDEVICE_ID_CCD_BNE1D, 0, 0, H(22)}, /* BNE1 (Dual) */
+
+	{ PCI_VENDOR_ID_CCD, PCI_DEVICE_ID_CCD_HFCE1, PCI_VENDOR_ID_CCD,
+		PCI_DEVICE_ID_CCD_HFCE1, 0, 0, H(23)}, /* Old Eval */
+	{ PCI_VENDOR_ID_CCD, PCI_DEVICE_ID_CCD_HFCE1, PCI_VENDOR_ID_CCD,
+		PCI_SUBDEVICE_ID_CCD_IOB1E1, 0, 0, H(24)}, /* IOB1E1 */
+	{ PCI_VENDOR_ID_CCD, PCI_DEVICE_ID_CCD_HFCE1, PCI_VENDOR_ID_CCD,
+		PCI_SUBDEVICE_ID_CCD_HFCE1, 0, 0, H(25)}, /* E1 */
+
+	{ PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9030, PCI_VENDOR_ID_CCD,
+		PCI_SUBDEVICE_ID_CCD_SPD4S, 0, 0, H(26)}, /* PLX PCI Bridge */
+	{ PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9030, PCI_VENDOR_ID_CCD,
+		PCI_SUBDEVICE_ID_CCD_SPDE1, 0, 0, H(27)}, /* PLX PCI Bridge */
+	{ PCI_VENDOR_ID_CCD, PCI_DEVICE_ID_CCD_HFC4S, PCI_ANY_ID, PCI_ANY_ID,
+		0, 0, 0},
+	{ PCI_VENDOR_ID_CCD, PCI_DEVICE_ID_CCD_HFC8S, PCI_ANY_ID, PCI_ANY_ID,
+		0, 0, 0},
+	{ PCI_VENDOR_ID_CCD, PCI_DEVICE_ID_CCD_HFCE1, PCI_ANY_ID, PCI_ANY_ID,
+		0, 0, 0},
+	{0, }
+};
+#undef H
+
+MODULE_DEVICE_TABLE(pci, hfmultipci_ids);
+
+static int
+hfcmulti_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
+{
+	struct hm_map	*m = (struct hm_map *)ent->driver_data;
+	int		ret;
+
+	if (m == NULL) {
+		if (ent->vendor == PCI_VENDOR_ID_CCD)
+			if (ent->device == PCI_DEVICE_ID_CCD_HFC4S ||
+			    ent->device == PCI_DEVICE_ID_CCD_HFC8S ||
+			    ent->device == PCI_DEVICE_ID_CCD_HFCE1)
+				printk(KERN_ERR
+				    "unknown HFC multiport controller "
+				    "(vendor:%x device:%x subvendor:%x "
+				    "subdevice:%x) Please contact the "
+				    "driver maintainer for support.\n",
+				    ent->vendor, ent->device,
+				    ent->subvendor, ent->subdevice);
+		return -ENODEV;
+	}
+	ret = hfcmulti_init(pdev, ent);
+	if (ret)
+		return ret;
+	HFC_cnt++;
+	printk(KERN_INFO "%d devices registered\n", HFC_cnt);
+	return 0;
+}
+
+static struct pci_driver hfcmultipci_driver = {
+	.name		= "hfc_multi",
+	.probe		= hfcmulti_probe,
+	.remove		= __devexit_p(hfc_remove_pci),
+	.id_table	= hfmultipci_ids,
+};
+
+static void __exit
+HFCmulti_cleanup(void)
+{
+	struct hfc_multi *card, *next;
+
+	/* unload interrupt function symbol */
+	if (hfc_interrupt)
+		symbol_put(ztdummy_extern_interrupt);
+	if (register_interrupt)
+		symbol_put(ztdummy_register_interrupt);
+	if (unregister_interrupt) {
+		if (interrupt_registered) {
+			interrupt_registered = 0;
+			unregister_interrupt();
+		}
+		symbol_put(ztdummy_unregister_interrupt);
+	}
+
+	list_for_each_entry_safe(card, next, &HFClist, list)
+		release_card(card);
+	/* get rid of all devices of this driver */
+	pci_unregister_driver(&hfcmultipci_driver);
+}
+
+static int __init
+HFCmulti_init(void)
+{
+	int err;
+
+#ifdef IRQ_DEBUG
+	printk(KERN_ERR "%s: IRQ_DEBUG IS ENABLED!\n", __func__);
+#endif
+
+	spin_lock_init(&HFClock);
+	spin_lock_init(&plx_lock);
+
+	if (debug & DEBUG_HFCMULTI_INIT)
+		printk(KERN_DEBUG "%s: init entered\n", __func__);
+
+	hfc_interrupt = symbol_get(ztdummy_extern_interrupt);
+	register_interrupt = symbol_get(ztdummy_register_interrupt);
+	unregister_interrupt = symbol_get(ztdummy_unregister_interrupt);
+	printk(KERN_INFO "mISDN: HFC-multi driver %s\n",
+	    hfcmulti_revision);
+
+	switch (poll) {
+	case 0:
+		poll_timer = 6;
+		poll = 128;
+		break;
+		/*
+		 * wenn dieses break nochmal verschwindet,
+		 * gibt es heisse ohren :-)
+		 * "without the break you will get hot ears ???"
+		 */
+	case 8:
+		poll_timer = 2;
+		break;
+	case 16:
+		poll_timer = 3;
+		break;
+	case 32:
+		poll_timer = 4;
+		break;
+	case 64:
+		poll_timer = 5;
+		break;
+	case 128:
+		poll_timer = 6;
+		break;
+	case 256:
+		poll_timer = 7;
+		break;
+	default:
+		printk(KERN_ERR
+		    "%s: Wrong poll value (%d).\n", __func__, poll);
+		err = -EINVAL;
+		return err;
+
+	}
+
+	err = pci_register_driver(&hfcmultipci_driver);
+	if (err < 0) {
+		printk(KERN_ERR "error registering pci driver: %x\n", err);
+		if (hfc_interrupt)
+			symbol_put(ztdummy_extern_interrupt);
+		if (register_interrupt)
+			symbol_put(ztdummy_register_interrupt);
+		if (unregister_interrupt) {
+			if (interrupt_registered) {
+				interrupt_registered = 0;
+				unregister_interrupt();
+			}
+			symbol_put(ztdummy_unregister_interrupt);
+		}
+		return err;
+	}
+	return 0;
+}
+
+
+module_init(HFCmulti_init);
+module_exit(HFCmulti_cleanup);
diff --git a/drivers/isdn/hardware/mISDN/hfcpci.c b/drivers/isdn/hardware/mISDN/hfcpci.c
new file mode 100644
index 000000000000..9cf5edbb1a9b
--- /dev/null
+++ b/drivers/isdn/hardware/mISDN/hfcpci.c
@@ -0,0 +1,2255 @@
+/*
+ *
+ * hfcpci.c     low level driver for CCD's hfc-pci based cards
+ *
+ * Author     Werner Cornelius (werner@isdn4linux.de)
+ *            based on existing driver for CCD hfc ISA cards
+ *            type approval valid for HFC-S PCI A based card
+ *
+ * Copyright 1999  by Werner Cornelius (werner@isdn-development.de)
+ * Copyright 2008  by Karsten Keil <kkeil@novell.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/delay.h>
+#include <linux/mISDNhw.h>
+
+#include "hfc_pci.h"
+
+static const char *hfcpci_revision = "2.0";
+
+#define MAX_CARDS	8
+static int HFC_cnt;
+static uint debug;
+
+MODULE_AUTHOR("Karsten Keil");
+MODULE_LICENSE("GPL");
+module_param(debug, uint, 0);
+
+static LIST_HEAD(HFClist);
+DEFINE_RWLOCK(HFClock);
+
+enum {
+	HFC_CCD_2BD0,
+	HFC_CCD_B000,
+	HFC_CCD_B006,
+	HFC_CCD_B007,
+	HFC_CCD_B008,
+	HFC_CCD_B009,
+	HFC_CCD_B00A,
+	HFC_CCD_B00B,
+	HFC_CCD_B00C,
+	HFC_CCD_B100,
+	HFC_CCD_B700,
+	HFC_CCD_B701,
+	HFC_ASUS_0675,
+	HFC_BERKOM_A1T,
+	HFC_BERKOM_TCONCEPT,
+	HFC_ANIGMA_MC145575,
+	HFC_ZOLTRIX_2BD0,
+	HFC_DIGI_DF_M_IOM2_E,
+	HFC_DIGI_DF_M_E,
+	HFC_DIGI_DF_M_IOM2_A,
+	HFC_DIGI_DF_M_A,
+	HFC_ABOCOM_2BD1,
+	HFC_SITECOM_DC105V2,
+};
+
+struct hfcPCI_hw {
+	unsigned char		cirm;
+	unsigned char		ctmt;
+	unsigned char		clkdel;
+	unsigned char		states;
+	unsigned char		conn;
+	unsigned char		mst_m;
+	unsigned char		int_m1;
+	unsigned char		int_m2;
+	unsigned char		sctrl;
+	unsigned char		sctrl_r;
+	unsigned char		sctrl_e;
+	unsigned char		trm;
+	unsigned char		fifo_en;
+	unsigned char		bswapped;
+	unsigned char		protocol;
+	int			nt_timer;
+	unsigned char		*pci_io; /* start of PCI IO memory */
+	dma_addr_t		dmahandle;
+	void			*fifos; /* FIFO memory */
+	int			last_bfifo_cnt[2];
+	    /* marker saving last b-fifo frame count */
+	struct timer_list	timer;
+};
+
+#define	HFC_CFG_MASTER		1
+#define HFC_CFG_SLAVE		2
+#define	HFC_CFG_PCM		3
+#define HFC_CFG_2HFC		4
+#define HFC_CFG_SLAVEHFC	5
+#define HFC_CFG_NEG_F0		6
+#define HFC_CFG_SW_DD_DU	7
+
+#define FLG_HFC_TIMER_T1	16
+#define FLG_HFC_TIMER_T3	17
+
+#define NT_T1_COUNT	1120	/* number of 3.125ms interrupts (3.5s) */
+#define NT_T3_COUNT	31	/* number of 3.125ms interrupts (97 ms) */
+#define CLKDEL_TE	0x0e	/* CLKDEL in TE mode */
+#define CLKDEL_NT	0x6c	/* CLKDEL in NT mode */
+
+
+struct hfc_pci {
+	struct list_head	list;
+	u_char			subtype;
+	u_char			chanlimit;
+	u_char			initdone;
+	u_long			cfg;
+	u_int			irq;
+	u_int			irqcnt;
+	struct pci_dev		*pdev;
+	struct hfcPCI_hw	hw;
+	spinlock_t		lock;	/* card lock */
+	struct dchannel		dch;
+	struct bchannel		bch[2];
+};
+
+/* Interface functions */
+static void
+enable_hwirq(struct hfc_pci *hc)
+{
+	hc->hw.int_m2 |= HFCPCI_IRQ_ENABLE;
+	Write_hfc(hc, HFCPCI_INT_M2, hc->hw.int_m2);
+}
+
+static void
+disable_hwirq(struct hfc_pci *hc)
+{
+	hc->hw.int_m2 &= ~((u_char)HFCPCI_IRQ_ENABLE);
+	Write_hfc(hc, HFCPCI_INT_M2, hc->hw.int_m2);
+}
+
+/*
+ * free hardware resources used by driver
+ */
+static void
+release_io_hfcpci(struct hfc_pci *hc)
+{
+	/* disable memory mapped ports + busmaster */
+	pci_write_config_word(hc->pdev, PCI_COMMAND, 0);
+	del_timer(&hc->hw.timer);
+	pci_free_consistent(hc->pdev, 0x8000, hc->hw.fifos, hc->hw.dmahandle);
+	iounmap((void *)hc->hw.pci_io);
+}
+
+/*
+ * set mode (NT or TE)
+ */
+static void
+hfcpci_setmode(struct hfc_pci *hc)
+{
+	if (hc->hw.protocol == ISDN_P_NT_S0) {
+		hc->hw.clkdel = CLKDEL_NT;	/* ST-Bit delay for NT-Mode */
+		hc->hw.sctrl |= SCTRL_MODE_NT;	/* NT-MODE */
+		hc->hw.states = 1;		/* G1 */
+	} else {
+		hc->hw.clkdel = CLKDEL_TE;	/* ST-Bit delay for TE-Mode */
+		hc->hw.sctrl &= ~SCTRL_MODE_NT;	/* TE-MODE */
+		hc->hw.states = 2;		/* F2 */
+	}
+	Write_hfc(hc, HFCPCI_CLKDEL, hc->hw.clkdel);
+	Write_hfc(hc, HFCPCI_STATES, HFCPCI_LOAD_STATE | hc->hw.states);
+	udelay(10);
+	Write_hfc(hc, HFCPCI_STATES, hc->hw.states | 0x40); /* Deactivate */
+	Write_hfc(hc, HFCPCI_SCTRL, hc->hw.sctrl);
+}
+
+/*
+ * function called to reset the HFC PCI chip. A complete software reset of chip
+ * and fifos is done.
+ */
+static void
+reset_hfcpci(struct hfc_pci *hc)
+{
+	u_char	val;
+	int	cnt = 0;
+
+	printk(KERN_DEBUG "reset_hfcpci: entered\n");
+	val = Read_hfc(hc, HFCPCI_CHIP_ID);
+	printk(KERN_INFO "HFC_PCI: resetting HFC ChipId(%x)\n", val);
+	/* enable memory mapped ports, disable busmaster */
+	pci_write_config_word(hc->pdev, PCI_COMMAND, PCI_ENA_MEMIO);
+	disable_hwirq(hc);
+	/* enable memory ports + busmaster */
+	pci_write_config_word(hc->pdev, PCI_COMMAND,
+	    PCI_ENA_MEMIO + PCI_ENA_MASTER);
+	val = Read_hfc(hc, HFCPCI_STATUS);
+	printk(KERN_DEBUG "HFC-PCI status(%x) before reset\n", val);
+	hc->hw.cirm = HFCPCI_RESET;	/* Reset On */
+	Write_hfc(hc, HFCPCI_CIRM, hc->hw.cirm);
+	set_current_state(TASK_UNINTERRUPTIBLE);
+	mdelay(10);			/* Timeout 10ms */
+	hc->hw.cirm = 0;		/* Reset Off */
+	Write_hfc(hc, HFCPCI_CIRM, hc->hw.cirm);
+	val = Read_hfc(hc, HFCPCI_STATUS);
+	printk(KERN_DEBUG "HFC-PCI status(%x) after reset\n", val);
+	while (cnt < 50000) { /* max 50000 us */
+		udelay(5);
+		cnt += 5;
+		val = Read_hfc(hc, HFCPCI_STATUS);
+		if (!(val & 2))
+			break;
+	}
+	printk(KERN_DEBUG "HFC-PCI status(%x) after %dus\n", val, cnt);
+
+	hc->hw.fifo_en = 0x30;	/* only D fifos enabled */
+
+	hc->hw.bswapped = 0;	/* no exchange */
+	hc->hw.ctmt = HFCPCI_TIM3_125 | HFCPCI_AUTO_TIMER;
+	hc->hw.trm = HFCPCI_BTRANS_THRESMASK; /* no echo connect , threshold */
+	hc->hw.sctrl = 0x40;	/* set tx_lo mode, error in datasheet ! */
+	hc->hw.sctrl_r = 0;
+	hc->hw.sctrl_e = HFCPCI_AUTO_AWAKE;	/* S/T Auto awake */
+	hc->hw.mst_m = 0;
+	if (test_bit(HFC_CFG_MASTER, &hc->cfg))
+		hc->hw.mst_m |= HFCPCI_MASTER;	/* HFC Master Mode */
+	if (test_bit(HFC_CFG_NEG_F0, &hc->cfg))
+		hc->hw.mst_m |= HFCPCI_F0_NEGATIV;
+	Write_hfc(hc, HFCPCI_FIFO_EN, hc->hw.fifo_en);
+	Write_hfc(hc, HFCPCI_TRM, hc->hw.trm);
+	Write_hfc(hc, HFCPCI_SCTRL_E, hc->hw.sctrl_e);
+	Write_hfc(hc, HFCPCI_CTMT, hc->hw.ctmt);
+
+	hc->hw.int_m1 = HFCPCI_INTS_DTRANS | HFCPCI_INTS_DREC |
+	    HFCPCI_INTS_L1STATE | HFCPCI_INTS_TIMER;
+	Write_hfc(hc, HFCPCI_INT_M1, hc->hw.int_m1);
+
+	/* Clear already pending ints */
+	if (Read_hfc(hc, HFCPCI_INT_S1));
+
+	/* set NT/TE mode */
+	hfcpci_setmode(hc);
+
+	Write_hfc(hc, HFCPCI_MST_MODE, hc->hw.mst_m);
+	Write_hfc(hc, HFCPCI_SCTRL_R, hc->hw.sctrl_r);
+
+	/*
+	 * Init GCI/IOM2 in master mode
+	 * Slots 0 and 1 are set for B-chan 1 and 2
+	 * D- and monitor/CI channel are not enabled
+	 * STIO1 is used as output for data, B1+B2 from ST->IOM+HFC
+	 * STIO2 is used as data input, B1+B2 from IOM->ST
+	 * ST B-channel send disabled -> continous 1s
+	 * The IOM slots are always enabled
+	 */
+	if (test_bit(HFC_CFG_PCM, &hc->cfg)) {
+		/* set data flow directions: connect B1,B2: HFC to/from PCM */
+		hc->hw.conn = 0x09;
+	} else {
+		hc->hw.conn = 0x36;	/* set data flow directions */
+		if (test_bit(HFC_CFG_SW_DD_DU, &hc->cfg)) {
+			Write_hfc(hc, HFCPCI_B1_SSL, 0xC0);
+			Write_hfc(hc, HFCPCI_B2_SSL, 0xC1);
+			Write_hfc(hc, HFCPCI_B1_RSL, 0xC0);
+			Write_hfc(hc, HFCPCI_B2_RSL, 0xC1);
+		} else {
+			Write_hfc(hc, HFCPCI_B1_SSL, 0x80);
+			Write_hfc(hc, HFCPCI_B2_SSL, 0x81);
+			Write_hfc(hc, HFCPCI_B1_RSL, 0x80);
+			Write_hfc(hc, HFCPCI_B2_RSL, 0x81);
+		}
+	}
+	Write_hfc(hc, HFCPCI_CONNECT, hc->hw.conn);
+	val = Read_hfc(hc, HFCPCI_INT_S2);
+}
+
+/*
+ * Timer function called when kernel timer expires
+ */
+static void
+hfcpci_Timer(struct hfc_pci *hc)
+{
+	hc->hw.timer.expires = jiffies + 75;
+	/* WD RESET */
+/*
+ *	WriteReg(hc, HFCD_DATA, HFCD_CTMT, hc->hw.ctmt | 0x80);
+ *	add_timer(&hc->hw.timer);
+ */
+}
+
+
+/*
+ * select a b-channel entry matching and active
+ */
+static struct bchannel *
+Sel_BCS(struct hfc_pci *hc, int channel)
+{
+	if (test_bit(FLG_ACTIVE, &hc->bch[0].Flags) &&
+		(hc->bch[0].nr & channel))
+		return &hc->bch[0];
+	else if (test_bit(FLG_ACTIVE, &hc->bch[1].Flags) &&
+		(hc->bch[1].nr & channel))
+		return &hc->bch[1];
+	else
+		return NULL;
+}
+
+/*
+ * clear the desired B-channel rx fifo
+ */
+static void
+hfcpci_clear_fifo_rx(struct hfc_pci *hc, int fifo)
+{
+	u_char		fifo_state;
+	struct bzfifo	*bzr;
+
+	if (fifo) {
+		bzr = &((union fifo_area *)(hc->hw.fifos))->b_chans.rxbz_b2;
+		fifo_state = hc->hw.fifo_en & HFCPCI_FIFOEN_B2RX;
+	} else {
+		bzr = &((union fifo_area *)(hc->hw.fifos))->b_chans.rxbz_b1;
+		fifo_state = hc->hw.fifo_en & HFCPCI_FIFOEN_B1RX;
+	}
+	if (fifo_state)
+		hc->hw.fifo_en ^= fifo_state;
+	Write_hfc(hc, HFCPCI_FIFO_EN, hc->hw.fifo_en);
+	hc->hw.last_bfifo_cnt[fifo] = 0;
+	bzr->f1 = MAX_B_FRAMES;
+	bzr->f2 = bzr->f1;	/* init F pointers to remain constant */
+	bzr->za[MAX_B_FRAMES].z1 = cpu_to_le16(B_FIFO_SIZE + B_SUB_VAL - 1);
+	bzr->za[MAX_B_FRAMES].z2 = cpu_to_le16(
+	    le16_to_cpu(bzr->za[MAX_B_FRAMES].z1));
+	if (fifo_state)
+		hc->hw.fifo_en |= fifo_state;
+	Write_hfc(hc, HFCPCI_FIFO_EN, hc->hw.fifo_en);
+}
+
+/*
+ * clear the desired B-channel tx fifo
+ */
+static void hfcpci_clear_fifo_tx(struct hfc_pci *hc, int fifo)
+{
+	u_char		fifo_state;
+	struct bzfifo	*bzt;
+
+	if (fifo) {
+		bzt = &((union fifo_area *)(hc->hw.fifos))->b_chans.txbz_b2;
+		fifo_state = hc->hw.fifo_en & HFCPCI_FIFOEN_B2TX;
+	} else {
+		bzt = &((union fifo_area *)(hc->hw.fifos))->b_chans.txbz_b1;
+		fifo_state = hc->hw.fifo_en & HFCPCI_FIFOEN_B1TX;
+	}
+	if (fifo_state)
+		hc->hw.fifo_en ^= fifo_state;
+	Write_hfc(hc, HFCPCI_FIFO_EN, hc->hw.fifo_en);
+	if (hc->bch[fifo].debug & DEBUG_HW_BCHANNEL)
+		printk(KERN_DEBUG "hfcpci_clear_fifo_tx%d f1(%x) f2(%x) "
+		    "z1(%x) z2(%x) state(%x)\n",
+		    fifo, bzt->f1, bzt->f2,
+		    le16_to_cpu(bzt->za[MAX_B_FRAMES].z1),
+		    le16_to_cpu(bzt->za[MAX_B_FRAMES].z2),
+		    fifo_state);
+	bzt->f2 = MAX_B_FRAMES;
+	bzt->f1 = bzt->f2;	/* init F pointers to remain constant */
+	bzt->za[MAX_B_FRAMES].z1 = cpu_to_le16(B_FIFO_SIZE + B_SUB_VAL - 1);
+	bzt->za[MAX_B_FRAMES].z2 = cpu_to_le16(
+	    le16_to_cpu(bzt->za[MAX_B_FRAMES].z1 - 1));
+	if (fifo_state)
+		hc->hw.fifo_en |= fifo_state;
+	Write_hfc(hc, HFCPCI_FIFO_EN, hc->hw.fifo_en);
+	if (hc->bch[fifo].debug & DEBUG_HW_BCHANNEL)
+		printk(KERN_DEBUG
+		    "hfcpci_clear_fifo_tx%d f1(%x) f2(%x) z1(%x) z2(%x)\n",
+		    fifo, bzt->f1, bzt->f2,
+		    le16_to_cpu(bzt->za[MAX_B_FRAMES].z1),
+		    le16_to_cpu(bzt->za[MAX_B_FRAMES].z2));
+}
+
+/*
+ * read a complete B-frame out of the buffer
+ */
+static void
+hfcpci_empty_bfifo(struct bchannel *bch, struct bzfifo *bz,
+    u_char *bdata, int count)
+{
+	u_char		*ptr, *ptr1, new_f2;
+	int		total, maxlen, new_z2;
+	struct zt	*zp;
+
+	if ((bch->debug & DEBUG_HW_BCHANNEL) && !(bch->debug & DEBUG_HW_BFIFO))
+		printk(KERN_DEBUG "hfcpci_empty_fifo\n");
+	zp = &bz->za[bz->f2];	/* point to Z-Regs */
+	new_z2 = le16_to_cpu(zp->z2) + count;	/* new position in fifo */
+	if (new_z2 >= (B_FIFO_SIZE + B_SUB_VAL))
+		new_z2 -= B_FIFO_SIZE;	/* buffer wrap */
+	new_f2 = (bz->f2 + 1) & MAX_B_FRAMES;
+	if ((count > MAX_DATA_SIZE + 3) || (count < 4) ||
+	    (*(bdata + (le16_to_cpu(zp->z1) - B_SUB_VAL)))) {
+		if (bch->debug & DEBUG_HW)
+			printk(KERN_DEBUG "hfcpci_empty_fifo: incoming packet "
+			    "invalid length %d or crc\n", count);
+#ifdef ERROR_STATISTIC
+		bch->err_inv++;
+#endif
+		bz->za[new_f2].z2 = cpu_to_le16(new_z2);
+		bz->f2 = new_f2;	/* next buffer */
+	} else {
+		bch->rx_skb = mI_alloc_skb(count - 3, GFP_ATOMIC);
+		if (!bch->rx_skb) {
+			printk(KERN_WARNING "HFCPCI: receive out of memory\n");
+			return;
+		}
+		total = count;
+		count -= 3;
+		ptr = skb_put(bch->rx_skb, count);
+
+		if (le16_to_cpu(zp->z2) + count <= B_FIFO_SIZE + B_SUB_VAL)
+			maxlen = count;		/* complete transfer */
+		else
+			maxlen = B_FIFO_SIZE + B_SUB_VAL -
+			    le16_to_cpu(zp->z2);	/* maximum */
+
+		ptr1 = bdata + (le16_to_cpu(zp->z2) - B_SUB_VAL);
+		    /* start of data */
+		memcpy(ptr, ptr1, maxlen);	/* copy data */
+		count -= maxlen;
+
+		if (count) {	/* rest remaining */
+			ptr += maxlen;
+			ptr1 = bdata;	/* start of buffer */
+			memcpy(ptr, ptr1, count);	/* rest */
+		}
+		bz->za[new_f2].z2 = cpu_to_le16(new_z2);
+		bz->f2 = new_f2;	/* next buffer */
+		recv_Bchannel(bch);
+	}
+}
+
+/*
+ * D-channel receive procedure
+ */
+static int
+receive_dmsg(struct hfc_pci *hc)
+{
+	struct dchannel	*dch = &hc->dch;
+	int		maxlen;
+	int		rcnt, total;
+	int		count = 5;
+	u_char		*ptr, *ptr1;
+	struct dfifo	*df;
+	struct zt	*zp;
+
+	df = &((union fifo_area *)(hc->hw.fifos))->d_chan.d_rx;
+	while (((df->f1 & D_FREG_MASK) != (df->f2 & D_FREG_MASK)) && count--) {
+		zp = &df->za[df->f2 & D_FREG_MASK];
+		rcnt = le16_to_cpu(zp->z1) - le16_to_cpu(zp->z2);
+		if (rcnt < 0)
+			rcnt += D_FIFO_SIZE;
+		rcnt++;
+		if (dch->debug & DEBUG_HW_DCHANNEL)
+			printk(KERN_DEBUG
+			    "hfcpci recd f1(%d) f2(%d) z1(%x) z2(%x) cnt(%d)\n",
+				df->f1, df->f2,
+				le16_to_cpu(zp->z1),
+				le16_to_cpu(zp->z2),
+				rcnt);
+
+		if ((rcnt > MAX_DFRAME_LEN + 3) || (rcnt < 4) ||
+		    (df->data[le16_to_cpu(zp->z1)])) {
+			if (dch->debug & DEBUG_HW)
+				printk(KERN_DEBUG
+				    "empty_fifo hfcpci paket inv. len "
+				    "%d or crc %d\n",
+				    rcnt,
+				    df->data[le16_to_cpu(zp->z1)]);
+#ifdef ERROR_STATISTIC
+			cs->err_rx++;
+#endif
+			df->f2 = ((df->f2 + 1) & MAX_D_FRAMES) |
+			    (MAX_D_FRAMES + 1);	/* next buffer */
+			df->za[df->f2 & D_FREG_MASK].z2 =
+			    cpu_to_le16((zp->z2 + rcnt) & (D_FIFO_SIZE - 1));
+		} else {
+			dch->rx_skb = mI_alloc_skb(rcnt - 3, GFP_ATOMIC);
+			if (!dch->rx_skb) {
+				printk(KERN_WARNING
+				    "HFC-PCI: D receive out of memory\n");
+				break;
+			}
+			total = rcnt;
+			rcnt -= 3;
+			ptr = skb_put(dch->rx_skb, rcnt);
+
+			if (le16_to_cpu(zp->z2) + rcnt <= D_FIFO_SIZE)
+				maxlen = rcnt;	/* complete transfer */
+			else
+				maxlen = D_FIFO_SIZE - le16_to_cpu(zp->z2);
+				    /* maximum */
+
+			ptr1 = df->data + le16_to_cpu(zp->z2);
+			    /* start of data */
+			memcpy(ptr, ptr1, maxlen);	/* copy data */
+			rcnt -= maxlen;
+
+			if (rcnt) {	/* rest remaining */
+				ptr += maxlen;
+				ptr1 = df->data;	/* start of buffer */
+				memcpy(ptr, ptr1, rcnt);	/* rest */
+			}
+			df->f2 = ((df->f2 + 1) & MAX_D_FRAMES) |
+			    (MAX_D_FRAMES + 1);	/* next buffer */
+			df->za[df->f2 & D_FREG_MASK].z2 = cpu_to_le16((
+			    le16_to_cpu(zp->z2) + total) & (D_FIFO_SIZE - 1));
+			recv_Dchannel(dch);
+		}
+	}
+	return 1;
+}
+
+/*
+ * check for transparent receive data and read max one threshold size if avail
+ */
+int
+hfcpci_empty_fifo_trans(struct bchannel *bch, struct bzfifo *bz, u_char *bdata)
+{
+	unsigned short	*z1r, *z2r;
+	int		new_z2, fcnt, maxlen;
+	u_char		*ptr, *ptr1;
+
+	z1r = &bz->za[MAX_B_FRAMES].z1;		/* pointer to z reg */
+	z2r = z1r + 1;
+
+	fcnt = le16_to_cpu(*z1r) - le16_to_cpu(*z2r);
+	if (!fcnt)
+		return 0;	/* no data avail */
+
+	if (fcnt <= 0)
+		fcnt += B_FIFO_SIZE;	/* bytes actually buffered */
+	if (fcnt > HFCPCI_BTRANS_THRESHOLD)
+		fcnt = HFCPCI_BTRANS_THRESHOLD;		/* limit size */
+
+	new_z2 = le16_to_cpu(*z2r) + fcnt;	/* new position in fifo */
+	if (new_z2 >= (B_FIFO_SIZE + B_SUB_VAL))
+		new_z2 -= B_FIFO_SIZE;	/* buffer wrap */
+
+	bch->rx_skb = mI_alloc_skb(fcnt, GFP_ATOMIC);
+	if (bch->rx_skb) {
+		ptr = skb_put(bch->rx_skb, fcnt);
+		if (le16_to_cpu(*z2r) + fcnt <= B_FIFO_SIZE + B_SUB_VAL)
+			maxlen = fcnt;	/* complete transfer */
+		else
+			maxlen = B_FIFO_SIZE + B_SUB_VAL - le16_to_cpu(*z2r);
+			    /* maximum */
+
+		ptr1 = bdata + (le16_to_cpu(*z2r) - B_SUB_VAL);
+		    /* start of data */
+		memcpy(ptr, ptr1, maxlen);	/* copy data */
+		fcnt -= maxlen;
+
+		if (fcnt) {	/* rest remaining */
+			ptr += maxlen;
+			ptr1 = bdata;	/* start of buffer */
+			memcpy(ptr, ptr1, fcnt);	/* rest */
+		}
+		recv_Bchannel(bch);
+	} else
+		printk(KERN_WARNING "HFCPCI: receive out of memory\n");
+
+	*z2r = cpu_to_le16(new_z2);		/* new position */
+	return 1;
+}
+
+/*
+ * B-channel main receive routine
+ */
+void
+main_rec_hfcpci(struct bchannel *bch)
+{
+	struct hfc_pci	*hc = bch->hw;
+	int		rcnt, real_fifo;
+	int		receive, count = 5;
+	struct bzfifo	*bz;
+	u_char		*bdata;
+	struct zt	*zp;
+
+
+	if ((bch->nr & 2) && (!hc->hw.bswapped)) {
+		bz = &((union fifo_area *)(hc->hw.fifos))->b_chans.rxbz_b2;
+		bdata = ((union fifo_area *)(hc->hw.fifos))->b_chans.rxdat_b2;
+		real_fifo = 1;
+	} else {
+		bz = &((union fifo_area *)(hc->hw.fifos))->b_chans.rxbz_b1;
+		bdata = ((union fifo_area *)(hc->hw.fifos))->b_chans.rxdat_b1;
+		real_fifo = 0;
+	}
+Begin:
+	count--;
+	if (bz->f1 != bz->f2) {
+		if (bch->debug & DEBUG_HW_BCHANNEL)
+			printk(KERN_DEBUG "hfcpci rec ch(%x) f1(%d) f2(%d)\n",
+			    bch->nr, bz->f1, bz->f2);
+		zp = &bz->za[bz->f2];
+
+		rcnt = le16_to_cpu(zp->z1) - le16_to_cpu(zp->z2);
+		if (rcnt < 0)
+			rcnt += B_FIFO_SIZE;
+		rcnt++;
+		if (bch->debug & DEBUG_HW_BCHANNEL)
+			printk(KERN_DEBUG
+			    "hfcpci rec ch(%x) z1(%x) z2(%x) cnt(%d)\n",
+			    bch->nr, le16_to_cpu(zp->z1),
+			    le16_to_cpu(zp->z2), rcnt);
+		hfcpci_empty_bfifo(bch, bz, bdata, rcnt);
+		rcnt = bz->f1 - bz->f2;
+		if (rcnt < 0)
+			rcnt += MAX_B_FRAMES + 1;
+		if (hc->hw.last_bfifo_cnt[real_fifo] > rcnt + 1) {
+			rcnt = 0;
+			hfcpci_clear_fifo_rx(hc, real_fifo);
+		}
+		hc->hw.last_bfifo_cnt[real_fifo] = rcnt;
+		if (rcnt > 1)
+			receive = 1;
+		else
+			receive = 0;
+	} else if (test_bit(FLG_TRANSPARENT, &bch->Flags))
+		receive = hfcpci_empty_fifo_trans(bch, bz, bdata);
+	else
+		receive = 0;
+	if (count && receive)
+		goto Begin;
+
+}
+
+/*
+ * D-channel send routine
+ */
+static void
+hfcpci_fill_dfifo(struct hfc_pci *hc)
+{
+	struct dchannel	*dch = &hc->dch;
+	int		fcnt;
+	int		count, new_z1, maxlen;
+	struct dfifo	*df;
+	u_char		*src, *dst, new_f1;
+
+	if ((dch->debug & DEBUG_HW_DCHANNEL) && !(dch->debug & DEBUG_HW_DFIFO))
+		printk(KERN_DEBUG "%s\n", __func__);
+
+	if (!dch->tx_skb)
+		return;
+	count = dch->tx_skb->len - dch->tx_idx;
+	if (count <= 0)
+		return;
+	df = &((union fifo_area *) (hc->hw.fifos))->d_chan.d_tx;
+
+	if (dch->debug & DEBUG_HW_DFIFO)
+		printk(KERN_DEBUG "%s:f1(%d) f2(%d) z1(f1)(%x)\n", __func__,
+		    df->f1, df->f2,
+		    le16_to_cpu(df->za[df->f1 & D_FREG_MASK].z1));
+	fcnt = df->f1 - df->f2;	/* frame count actually buffered */
+	if (fcnt < 0)
+		fcnt += (MAX_D_FRAMES + 1);	/* if wrap around */
+	if (fcnt > (MAX_D_FRAMES - 1)) {
+		if (dch->debug & DEBUG_HW_DCHANNEL)
+			printk(KERN_DEBUG
+			    "hfcpci_fill_Dfifo more as 14 frames\n");
+#ifdef ERROR_STATISTIC
+		cs->err_tx++;
+#endif
+		return;
+	}
+	/* now determine free bytes in FIFO buffer */
+	maxlen = le16_to_cpu(df->za[df->f2 & D_FREG_MASK].z2) -
+	    le16_to_cpu(df->za[df->f1 & D_FREG_MASK].z1) - 1;
+	if (maxlen <= 0)
+		maxlen += D_FIFO_SIZE;	/* count now contains available bytes */
+
+	if (dch->debug & DEBUG_HW_DCHANNEL)
+		printk(KERN_DEBUG "hfcpci_fill_Dfifo count(%d/%d)\n",
+			count, maxlen);
+	if (count > maxlen) {
+		if (dch->debug & DEBUG_HW_DCHANNEL)
+			printk(KERN_DEBUG "hfcpci_fill_Dfifo no fifo mem\n");
+		return;
+	}
+	new_z1 = (le16_to_cpu(df->za[df->f1 & D_FREG_MASK].z1) + count) &
+	    (D_FIFO_SIZE - 1);
+	new_f1 = ((df->f1 + 1) & D_FREG_MASK) | (D_FREG_MASK + 1);
+	src = dch->tx_skb->data + dch->tx_idx;	/* source pointer */
+	dst = df->data + le16_to_cpu(df->za[df->f1 & D_FREG_MASK].z1);
+	maxlen = D_FIFO_SIZE - le16_to_cpu(df->za[df->f1 & D_FREG_MASK].z1);
+	    /* end fifo */
+	if (maxlen > count)
+		maxlen = count;	/* limit size */
+	memcpy(dst, src, maxlen);	/* first copy */
+
+	count -= maxlen;	/* remaining bytes */
+	if (count) {
+		dst = df->data;	/* start of buffer */
+		src += maxlen;	/* new position */
+		memcpy(dst, src, count);
+	}
+	df->za[new_f1 & D_FREG_MASK].z1 = cpu_to_le16(new_z1);
+	    /* for next buffer */
+	df->za[df->f1 & D_FREG_MASK].z1 = cpu_to_le16(new_z1);
+	    /* new pos actual buffer */
+	df->f1 = new_f1;	/* next frame */
+	dch->tx_idx = dch->tx_skb->len;
+}
+
+/*
+ * B-channel send routine
+ */
+static void
+hfcpci_fill_fifo(struct bchannel *bch)
+{
+	struct hfc_pci 	*hc = bch->hw;
+	int		maxlen, fcnt;
+	int		count, new_z1;
+	struct bzfifo	*bz;
+	u_char		*bdata;
+	u_char		new_f1, *src, *dst;
+	unsigned short	*z1t, *z2t;
+
+	if ((bch->debug & DEBUG_HW_BCHANNEL) && !(bch->debug & DEBUG_HW_BFIFO))
+		printk(KERN_DEBUG "%s\n", __func__);
+	if ((!bch->tx_skb) || bch->tx_skb->len <= 0)
+		return;
+	count = bch->tx_skb->len - bch->tx_idx;
+	if ((bch->nr & 2) && (!hc->hw.bswapped)) {
+		bz = &((union fifo_area *)(hc->hw.fifos))->b_chans.txbz_b2;
+		bdata = ((union fifo_area *)(hc->hw.fifos))->b_chans.txdat_b2;
+	} else {
+		bz = &((union fifo_area *)(hc->hw.fifos))->b_chans.txbz_b1;
+		bdata = ((union fifo_area *)(hc->hw.fifos))->b_chans.txdat_b1;
+	}
+
+	if (test_bit(FLG_TRANSPARENT, &bch->Flags)) {
+		z1t = &bz->za[MAX_B_FRAMES].z1;
+		z2t = z1t + 1;
+		if (bch->debug & DEBUG_HW_BCHANNEL)
+			printk(KERN_DEBUG "hfcpci_fill_fifo_trans ch(%x) "
+			    "cnt(%d) z1(%x) z2(%x)\n", bch->nr, count,
+			    le16_to_cpu(*z1t), le16_to_cpu(*z2t));
+		fcnt = le16_to_cpu(*z2t) - le16_to_cpu(*z1t);
+		if (fcnt <= 0)
+			fcnt += B_FIFO_SIZE;
+			    /* fcnt contains available bytes in fifo */
+		fcnt = B_FIFO_SIZE - fcnt;
+		    /* remaining bytes to send (bytes in fifo) */
+next_t_frame:
+		count = bch->tx_skb->len - bch->tx_idx;
+		/* maximum fill shall be HFCPCI_BTRANS_MAX */
+		if (count > HFCPCI_BTRANS_MAX - fcnt)
+			count = HFCPCI_BTRANS_MAX - fcnt;
+		if (count <= 0)
+			return;
+		/* data is suitable for fifo */
+		new_z1 = le16_to_cpu(*z1t) + count;
+		    /* new buffer Position */
+		if (new_z1 >= (B_FIFO_SIZE + B_SUB_VAL))
+			new_z1 -= B_FIFO_SIZE;	/* buffer wrap */
+		src = bch->tx_skb->data + bch->tx_idx;
+		    /* source pointer */
+		dst = bdata + (le16_to_cpu(*z1t) - B_SUB_VAL);
+		maxlen = (B_FIFO_SIZE + B_SUB_VAL) - le16_to_cpu(*z1t);
+		    /* end of fifo */
+		if (bch->debug & DEBUG_HW_BFIFO)
+			printk(KERN_DEBUG "hfcpci_FFt fcnt(%d) "
+			    "maxl(%d) nz1(%x) dst(%p)\n",
+			    fcnt, maxlen, new_z1, dst);
+		fcnt += count;
+		bch->tx_idx += count;
+		if (maxlen > count)
+			maxlen = count;		/* limit size */
+		memcpy(dst, src, maxlen);	/* first copy */
+		count -= maxlen;	/* remaining bytes */
+		if (count) {
+			dst = bdata;	/* start of buffer */
+			src += maxlen;	/* new position */
+			memcpy(dst, src, count);
+		}
+		*z1t = cpu_to_le16(new_z1);	/* now send data */
+		if (bch->tx_idx < bch->tx_skb->len)
+			return;
+		/* send confirm, on trans, free on hdlc. */
+		if (test_bit(FLG_TRANSPARENT, &bch->Flags))
+			confirm_Bsend(bch);
+		dev_kfree_skb(bch->tx_skb);
+		if (get_next_bframe(bch))
+			goto next_t_frame;
+		return;
+	}
+	if (bch->debug & DEBUG_HW_BCHANNEL)
+		printk(KERN_DEBUG
+		    "%s: ch(%x) f1(%d) f2(%d) z1(f1)(%x)\n",
+		    __func__, bch->nr, bz->f1, bz->f2,
+		    bz->za[bz->f1].z1);
+	fcnt = bz->f1 - bz->f2;	/* frame count actually buffered */
+	if (fcnt < 0)
+		fcnt += (MAX_B_FRAMES + 1);	/* if wrap around */
+	if (fcnt > (MAX_B_FRAMES - 1)) {
+		if (bch->debug & DEBUG_HW_BCHANNEL)
+			printk(KERN_DEBUG
+			    "hfcpci_fill_Bfifo more as 14 frames\n");
+		return;
+	}
+	/* now determine free bytes in FIFO buffer */
+	maxlen = le16_to_cpu(bz->za[bz->f2].z2) -
+	    le16_to_cpu(bz->za[bz->f1].z1) - 1;
+	if (maxlen <= 0)
+		maxlen += B_FIFO_SIZE;	/* count now contains available bytes */
+
+	if (bch->debug & DEBUG_HW_BCHANNEL)
+		printk(KERN_DEBUG "hfcpci_fill_fifo ch(%x) count(%d/%d)\n",
+			bch->nr, count, maxlen);
+
+	if (maxlen < count) {
+		if (bch->debug & DEBUG_HW_BCHANNEL)
+			printk(KERN_DEBUG "hfcpci_fill_fifo no fifo mem\n");
+		return;
+	}
+	new_z1 = le16_to_cpu(bz->za[bz->f1].z1) + count;
+	    /* new buffer Position */
+	if (new_z1 >= (B_FIFO_SIZE + B_SUB_VAL))
+		new_z1 -= B_FIFO_SIZE;	/* buffer wrap */
+
+	new_f1 = ((bz->f1 + 1) & MAX_B_FRAMES);
+	src = bch->tx_skb->data + bch->tx_idx;	/* source pointer */
+	dst = bdata + (le16_to_cpu(bz->za[bz->f1].z1) - B_SUB_VAL);
+	maxlen = (B_FIFO_SIZE + B_SUB_VAL) - le16_to_cpu(bz->za[bz->f1].z1);
+	    /* end fifo */
+	if (maxlen > count)
+		maxlen = count;	/* limit size */
+	memcpy(dst, src, maxlen);	/* first copy */
+
+	count -= maxlen;	/* remaining bytes */
+	if (count) {
+		dst = bdata;	/* start of buffer */
+		src += maxlen;	/* new position */
+		memcpy(dst, src, count);
+	}
+	bz->za[new_f1].z1 = cpu_to_le16(new_z1);	/* for next buffer */
+	bz->f1 = new_f1;	/* next frame */
+	dev_kfree_skb(bch->tx_skb);
+	get_next_bframe(bch);
+}
+
+
+
+/*
+ * handle L1 state changes TE
+ */
+
+static void
+ph_state_te(struct dchannel *dch)
+{
+	if (dch->debug)
+		printk(KERN_DEBUG "%s: TE newstate %x\n",
+			__func__, dch->state);
+	switch (dch->state) {
+	case 0:
+		l1_event(dch->l1, HW_RESET_IND);
+		break;
+	case 3:
+		l1_event(dch->l1, HW_DEACT_IND);
+		break;
+	case 5:
+	case 8:
+		l1_event(dch->l1, ANYSIGNAL);
+		break;
+	case 6:
+		l1_event(dch->l1, INFO2);
+		break;
+	case 7:
+		l1_event(dch->l1, INFO4_P8);
+		break;
+	}
+}
+
+/*
+ * handle L1 state changes NT
+ */
+
+static void
+handle_nt_timer3(struct dchannel *dch) {
+	struct hfc_pci	*hc = dch->hw;
+
+	test_and_clear_bit(FLG_HFC_TIMER_T3, &dch->Flags);
+	hc->hw.int_m1 &= ~HFCPCI_INTS_TIMER;
+	Write_hfc(hc, HFCPCI_INT_M1, hc->hw.int_m1);
+	hc->hw.nt_timer = 0;
+	test_and_set_bit(FLG_ACTIVE, &dch->Flags);
+	if (test_bit(HFC_CFG_MASTER, &hc->cfg))
+		hc->hw.mst_m |= HFCPCI_MASTER;
+	Write_hfc(hc, HFCPCI_MST_MODE, hc->hw.mst_m);
+	_queue_data(&dch->dev.D, PH_ACTIVATE_IND,
+	    MISDN_ID_ANY, 0, NULL, GFP_ATOMIC);
+}
+
+static void
+ph_state_nt(struct dchannel *dch)
+{
+	struct hfc_pci	*hc = dch->hw;
+
+	if (dch->debug)
+		printk(KERN_DEBUG "%s: NT newstate %x\n",
+			__func__, dch->state);
+	switch (dch->state) {
+	case 2:
+		if (hc->hw.nt_timer < 0) {
+			hc->hw.nt_timer = 0;
+			test_and_clear_bit(FLG_HFC_TIMER_T3, &dch->Flags);
+			test_and_clear_bit(FLG_HFC_TIMER_T1, &dch->Flags);
+			hc->hw.int_m1 &= ~HFCPCI_INTS_TIMER;
+			Write_hfc(hc, HFCPCI_INT_M1, hc->hw.int_m1);
+			/* Clear already pending ints */
+			if (Read_hfc(hc, HFCPCI_INT_S1));
+			Write_hfc(hc, HFCPCI_STATES, 4 | HFCPCI_LOAD_STATE);
+			udelay(10);
+			Write_hfc(hc, HFCPCI_STATES, 4);
+			dch->state = 4;
+		} else if (hc->hw.nt_timer == 0) {
+			hc->hw.int_m1 |= HFCPCI_INTS_TIMER;
+			Write_hfc(hc, HFCPCI_INT_M1, hc->hw.int_m1);
+			hc->hw.nt_timer = NT_T1_COUNT;
+			hc->hw.ctmt &= ~HFCPCI_AUTO_TIMER;
+			hc->hw.ctmt |= HFCPCI_TIM3_125;
+			Write_hfc(hc, HFCPCI_CTMT, hc->hw.ctmt |
+				HFCPCI_CLTIMER);
+			test_and_clear_bit(FLG_HFC_TIMER_T3, &dch->Flags);
+			test_and_set_bit(FLG_HFC_TIMER_T1, &dch->Flags);
+			/* allow G2 -> G3 transition */
+			Write_hfc(hc, HFCPCI_STATES, 2 | HFCPCI_NT_G2_G3);
+		} else {
+			Write_hfc(hc, HFCPCI_STATES, 2 | HFCPCI_NT_G2_G3);
+		}
+		break;
+	case 1:
+		hc->hw.nt_timer = 0;
+		test_and_clear_bit(FLG_HFC_TIMER_T3, &dch->Flags);
+		test_and_clear_bit(FLG_HFC_TIMER_T1, &dch->Flags);
+		hc->hw.int_m1 &= ~HFCPCI_INTS_TIMER;
+		Write_hfc(hc, HFCPCI_INT_M1, hc->hw.int_m1);
+		test_and_clear_bit(FLG_ACTIVE, &dch->Flags);
+		hc->hw.mst_m &= ~HFCPCI_MASTER;
+		Write_hfc(hc, HFCPCI_MST_MODE, hc->hw.mst_m);
+		test_and_clear_bit(FLG_L2_ACTIVATED, &dch->Flags);
+		_queue_data(&dch->dev.D, PH_DEACTIVATE_IND,
+		    MISDN_ID_ANY, 0, NULL, GFP_ATOMIC);
+		break;
+	case 4:
+		hc->hw.nt_timer = 0;
+		test_and_clear_bit(FLG_HFC_TIMER_T3, &dch->Flags);
+		test_and_clear_bit(FLG_HFC_TIMER_T1, &dch->Flags);
+		hc->hw.int_m1 &= ~HFCPCI_INTS_TIMER;
+		Write_hfc(hc, HFCPCI_INT_M1, hc->hw.int_m1);
+		break;
+	case 3:
+		if (!test_and_set_bit(FLG_HFC_TIMER_T3, &dch->Flags)) {
+			if (!test_and_clear_bit(FLG_L2_ACTIVATED,
+			    &dch->Flags)) {
+				handle_nt_timer3(dch);
+				break;
+			}
+			test_and_clear_bit(FLG_HFC_TIMER_T1, &dch->Flags);
+			hc->hw.int_m1 |= HFCPCI_INTS_TIMER;
+			Write_hfc(hc, HFCPCI_INT_M1, hc->hw.int_m1);
+			hc->hw.nt_timer = NT_T3_COUNT;
+			hc->hw.ctmt &= ~HFCPCI_AUTO_TIMER;
+			hc->hw.ctmt |= HFCPCI_TIM3_125;
+			Write_hfc(hc, HFCPCI_CTMT, hc->hw.ctmt |
+				HFCPCI_CLTIMER);
+		}
+		break;
+	}
+}
+
+static void
+ph_state(struct dchannel *dch)
+{
+	struct hfc_pci	*hc = dch->hw;
+
+	if (hc->hw.protocol == ISDN_P_NT_S0) {
+		if (test_bit(FLG_HFC_TIMER_T3, &dch->Flags) &&
+		    hc->hw.nt_timer < 0)
+			handle_nt_timer3(dch);
+		else
+			ph_state_nt(dch);
+	} else
+		ph_state_te(dch);
+}
+
+/*
+ * Layer 1 callback function
+ */
+static int
+hfc_l1callback(struct dchannel *dch, u_int cmd)
+{
+	struct hfc_pci		*hc = dch->hw;
+
+	switch (cmd) {
+	case INFO3_P8:
+	case INFO3_P10:
+		if (test_bit(HFC_CFG_MASTER, &hc->cfg))
+			hc->hw.mst_m |= HFCPCI_MASTER;
+		Write_hfc(hc, HFCPCI_MST_MODE, hc->hw.mst_m);
+		break;
+	case HW_RESET_REQ:
+		Write_hfc(hc, HFCPCI_STATES, HFCPCI_LOAD_STATE | 3);
+		/* HFC ST 3 */
+		udelay(6);
+		Write_hfc(hc, HFCPCI_STATES, 3);	/* HFC ST 2 */
+		if (test_bit(HFC_CFG_MASTER, &hc->cfg))
+			hc->hw.mst_m |= HFCPCI_MASTER;
+		Write_hfc(hc, HFCPCI_MST_MODE, hc->hw.mst_m);
+		Write_hfc(hc, HFCPCI_STATES, HFCPCI_ACTIVATE |
+		   HFCPCI_DO_ACTION);
+		l1_event(dch->l1, HW_POWERUP_IND);
+		break;
+	case HW_DEACT_REQ:
+		hc->hw.mst_m &= ~HFCPCI_MASTER;
+		Write_hfc(hc, HFCPCI_MST_MODE, hc->hw.mst_m);
+		skb_queue_purge(&dch->squeue);
+		if (dch->tx_skb) {
+			dev_kfree_skb(dch->tx_skb);
+			dch->tx_skb = NULL;
+		}
+		dch->tx_idx = 0;
+		if (dch->rx_skb) {
+			dev_kfree_skb(dch->rx_skb);
+			dch->rx_skb = NULL;
+		}
+		test_and_clear_bit(FLG_TX_BUSY, &dch->Flags);
+		if (test_and_clear_bit(FLG_BUSY_TIMER, &dch->Flags))
+			del_timer(&dch->timer);
+		break;
+	case HW_POWERUP_REQ:
+		Write_hfc(hc, HFCPCI_STATES, HFCPCI_DO_ACTION);
+		break;
+	case PH_ACTIVATE_IND:
+		test_and_set_bit(FLG_ACTIVE, &dch->Flags);
+		_queue_data(&dch->dev.D, cmd, MISDN_ID_ANY, 0, NULL,
+			GFP_ATOMIC);
+		break;
+	case PH_DEACTIVATE_IND:
+		test_and_clear_bit(FLG_ACTIVE, &dch->Flags);
+		_queue_data(&dch->dev.D, cmd, MISDN_ID_ANY, 0, NULL,
+			GFP_ATOMIC);
+		break;
+	default:
+		if (dch->debug & DEBUG_HW)
+			printk(KERN_DEBUG "%s: unknown command %x\n",
+			    __func__, cmd);
+		return -1;
+	}
+	return 0;
+}
+
+/*
+ * Interrupt handler
+ */
+static inline void
+tx_birq(struct bchannel *bch)
+{
+	if (bch->tx_skb && bch->tx_idx < bch->tx_skb->len)
+		hfcpci_fill_fifo(bch);
+	else {
+		if (bch->tx_skb)
+			dev_kfree_skb(bch->tx_skb);
+		if (get_next_bframe(bch))
+			hfcpci_fill_fifo(bch);
+	}
+}
+
+static inline void
+tx_dirq(struct dchannel *dch)
+{
+	if (dch->tx_skb && dch->tx_idx < dch->tx_skb->len)
+		hfcpci_fill_dfifo(dch->hw);
+	else {
+		if (dch->tx_skb)
+			dev_kfree_skb(dch->tx_skb);
+		if (get_next_dframe(dch))
+			hfcpci_fill_dfifo(dch->hw);
+	}
+}
+
+static irqreturn_t
+hfcpci_int(int intno, void *dev_id)
+{
+	struct hfc_pci	*hc = dev_id;
+	u_char		exval;
+	struct bchannel	*bch;
+	u_char		val, stat;
+
+	spin_lock(&hc->lock);
+	if (!(hc->hw.int_m2 & 0x08)) {
+		spin_unlock(&hc->lock);
+		return IRQ_NONE; /* not initialised */
+	}
+	stat = Read_hfc(hc, HFCPCI_STATUS);
+	if (HFCPCI_ANYINT & stat) {
+		val = Read_hfc(hc, HFCPCI_INT_S1);
+		if (hc->dch.debug & DEBUG_HW_DCHANNEL)
+			printk(KERN_DEBUG
+			    "HFC-PCI: stat(%02x) s1(%02x)\n", stat, val);
+	} else {
+		/* shared */
+		spin_unlock(&hc->lock);
+		return IRQ_NONE;
+	}
+	hc->irqcnt++;
+
+	if (hc->dch.debug & DEBUG_HW_DCHANNEL)
+		printk(KERN_DEBUG "HFC-PCI irq %x\n", val);
+	val &= hc->hw.int_m1;
+	if (val & 0x40) {	/* state machine irq */
+		exval = Read_hfc(hc, HFCPCI_STATES) & 0xf;
+		if (hc->dch.debug & DEBUG_HW_DCHANNEL)
+			printk(KERN_DEBUG "ph_state chg %d->%d\n",
+				hc->dch.state, exval);
+		hc->dch.state = exval;
+		schedule_event(&hc->dch, FLG_PHCHANGE);
+		val &= ~0x40;
+	}
+	if (val & 0x80) {	/* timer irq */
+		if (hc->hw.protocol == ISDN_P_NT_S0) {
+			if ((--hc->hw.nt_timer) < 0)
+				schedule_event(&hc->dch, FLG_PHCHANGE);
+		}
+		val &= ~0x80;
+		Write_hfc(hc, HFCPCI_CTMT, hc->hw.ctmt | HFCPCI_CLTIMER);
+	}
+	if (val & 0x08) {
+		bch = Sel_BCS(hc, hc->hw.bswapped ? 2 : 1);
+		if (bch)
+			main_rec_hfcpci(bch);
+		else if (hc->dch.debug)
+			printk(KERN_DEBUG "hfcpci spurious 0x08 IRQ\n");
+	}
+	if (val & 0x10) {
+		bch = Sel_BCS(hc, 2);
+		if (bch)
+			main_rec_hfcpci(bch);
+		else if (hc->dch.debug)
+			printk(KERN_DEBUG "hfcpci spurious 0x10 IRQ\n");
+	}
+	if (val & 0x01) {
+		bch = Sel_BCS(hc, hc->hw.bswapped ? 2 : 1);
+		if (bch)
+			tx_birq(bch);
+		else if (hc->dch.debug)
+			printk(KERN_DEBUG "hfcpci spurious 0x01 IRQ\n");
+	}
+	if (val & 0x02) {
+		bch = Sel_BCS(hc, 2);
+		if (bch)
+			tx_birq(bch);
+		else if (hc->dch.debug)
+			printk(KERN_DEBUG "hfcpci spurious 0x02 IRQ\n");
+	}
+	if (val & 0x20)
+		receive_dmsg(hc);
+	if (val & 0x04) {	/* dframe transmitted */
+		if (test_and_clear_bit(FLG_BUSY_TIMER, &hc->dch.Flags))
+			del_timer(&hc->dch.timer);
+		tx_dirq(&hc->dch);
+	}
+	spin_unlock(&hc->lock);
+	return IRQ_HANDLED;
+}
+
+/*
+ * timer callback for D-chan busy resolution. Currently no function
+ */
+static void
+hfcpci_dbusy_timer(struct hfc_pci *hc)
+{
+}
+
+/*
+ * activate/deactivate hardware for selected channels and mode
+ */
+static int
+mode_hfcpci(struct bchannel *bch, int bc, int protocol)
+{
+	struct hfc_pci	*hc = bch->hw;
+	int		fifo2;
+	u_char		rx_slot = 0, tx_slot = 0, pcm_mode;
+
+	if (bch->debug & DEBUG_HW_BCHANNEL)
+		printk(KERN_DEBUG
+		    "HFCPCI bchannel protocol %x-->%x ch %x-->%x\n",
+		    bch->state, protocol, bch->nr, bc);
+
+	fifo2 = bc;
+	pcm_mode = (bc>>24) & 0xff;
+	if (pcm_mode) { /* PCM SLOT USE */
+		if (!test_bit(HFC_CFG_PCM, &hc->cfg))
+			printk(KERN_WARNING
+			    "%s: pcm channel id without HFC_CFG_PCM\n",
+			    __func__);
+		rx_slot = (bc>>8) & 0xff;
+		tx_slot = (bc>>16) & 0xff;
+		bc = bc & 0xff;
+	} else if (test_bit(HFC_CFG_PCM, &hc->cfg) &&
+	    (protocol > ISDN_P_NONE))
+		printk(KERN_WARNING "%s: no pcm channel id but HFC_CFG_PCM\n",
+		    __func__);
+	if (hc->chanlimit > 1) {
+		hc->hw.bswapped = 0;	/* B1 and B2 normal mode */
+		hc->hw.sctrl_e &= ~0x80;
+	} else {
+		if (bc & 2) {
+			if (protocol != ISDN_P_NONE) {
+				hc->hw.bswapped = 1; /* B1 and B2 exchanged */
+				hc->hw.sctrl_e |= 0x80;
+			} else {
+				hc->hw.bswapped = 0; /* B1 and B2 normal mode */
+				hc->hw.sctrl_e &= ~0x80;
+			}
+			fifo2 = 1;
+		} else {
+			hc->hw.bswapped = 0;	/* B1 and B2 normal mode */
+			hc->hw.sctrl_e &= ~0x80;
+		}
+	}
+	switch (protocol) {
+	case (-1): /* used for init */
+		bch->state = -1;
+		bch->nr = bc;
+	case (ISDN_P_NONE):
+		if (bch->state == ISDN_P_NONE)
+			return 0;
+		if (bc & 2) {
+			hc->hw.sctrl &= ~SCTRL_B2_ENA;
+			hc->hw.sctrl_r &= ~SCTRL_B2_ENA;
+		} else {
+			hc->hw.sctrl &= ~SCTRL_B1_ENA;
+			hc->hw.sctrl_r &= ~SCTRL_B1_ENA;
+		}
+		if (fifo2 & 2) {
+			hc->hw.fifo_en &= ~HFCPCI_FIFOEN_B2;
+			hc->hw.int_m1 &= ~(HFCPCI_INTS_B2TRANS +
+				HFCPCI_INTS_B2REC);
+		} else {
+			hc->hw.fifo_en &= ~HFCPCI_FIFOEN_B1;
+			hc->hw.int_m1 &= ~(HFCPCI_INTS_B1TRANS +
+				HFCPCI_INTS_B1REC);
+		}
+#ifdef REVERSE_BITORDER
+		if (bch->nr & 2)
+			hc->hw.cirm &= 0x7f;
+		else
+			hc->hw.cirm &= 0xbf;
+#endif
+		bch->state = ISDN_P_NONE;
+		bch->nr = bc;
+		test_and_clear_bit(FLG_HDLC, &bch->Flags);
+		test_and_clear_bit(FLG_TRANSPARENT, &bch->Flags);
+		break;
+	case (ISDN_P_B_RAW):
+		bch->state = protocol;
+		bch->nr = bc;
+		hfcpci_clear_fifo_rx(hc, (fifo2 & 2)?1:0);
+		hfcpci_clear_fifo_tx(hc, (fifo2 & 2)?1:0);
+		if (bc & 2) {
+			hc->hw.sctrl |= SCTRL_B2_ENA;
+			hc->hw.sctrl_r |= SCTRL_B2_ENA;
+#ifdef REVERSE_BITORDER
+			hc->hw.cirm |= 0x80;
+#endif
+		} else {
+			hc->hw.sctrl |= SCTRL_B1_ENA;
+			hc->hw.sctrl_r |= SCTRL_B1_ENA;
+#ifdef REVERSE_BITORDER
+			hc->hw.cirm |= 0x40;
+#endif
+		}
+		if (fifo2 & 2) {
+			hc->hw.fifo_en |= HFCPCI_FIFOEN_B2;
+			hc->hw.int_m1 |= (HFCPCI_INTS_B2TRANS +
+			    HFCPCI_INTS_B2REC);
+			hc->hw.ctmt |= 2;
+			hc->hw.conn &= ~0x18;
+		} else {
+			hc->hw.fifo_en |= HFCPCI_FIFOEN_B1;
+			hc->hw.int_m1 |= (HFCPCI_INTS_B1TRANS +
+			    HFCPCI_INTS_B1REC);
+			hc->hw.ctmt |= 1;
+			hc->hw.conn &= ~0x03;
+		}
+		test_and_set_bit(FLG_TRANSPARENT, &bch->Flags);
+		break;
+	case (ISDN_P_B_HDLC):
+		bch->state = protocol;
+		bch->nr = bc;
+		hfcpci_clear_fifo_rx(hc, (fifo2 & 2)?1:0);
+		hfcpci_clear_fifo_tx(hc, (fifo2 & 2)?1:0);
+		if (bc & 2) {
+			hc->hw.sctrl |= SCTRL_B2_ENA;
+			hc->hw.sctrl_r |= SCTRL_B2_ENA;
+		} else {
+			hc->hw.sctrl |= SCTRL_B1_ENA;
+			hc->hw.sctrl_r |= SCTRL_B1_ENA;
+		}
+		if (fifo2 & 2) {
+			hc->hw.last_bfifo_cnt[1] = 0;
+			hc->hw.fifo_en |= HFCPCI_FIFOEN_B2;
+			hc->hw.int_m1 |= (HFCPCI_INTS_B2TRANS +
+			    HFCPCI_INTS_B2REC);
+			hc->hw.ctmt &= ~2;
+			hc->hw.conn &= ~0x18;
+		} else {
+			hc->hw.last_bfifo_cnt[0] = 0;
+			hc->hw.fifo_en |= HFCPCI_FIFOEN_B1;
+			hc->hw.int_m1 |= (HFCPCI_INTS_B1TRANS +
+			    HFCPCI_INTS_B1REC);
+			hc->hw.ctmt &= ~1;
+			hc->hw.conn &= ~0x03;
+		}
+		test_and_set_bit(FLG_HDLC, &bch->Flags);
+		break;
+	default:
+		printk(KERN_DEBUG "prot not known %x\n", protocol);
+		return -ENOPROTOOPT;
+	}
+	if (test_bit(HFC_CFG_PCM, &hc->cfg)) {
+		if ((protocol == ISDN_P_NONE) ||
+			(protocol == -1)) {	/* init case */
+			rx_slot = 0;
+			tx_slot = 0;
+		} else {
+			if (test_bit(HFC_CFG_SW_DD_DU, &hc->cfg)) {
+				rx_slot |= 0xC0;
+				tx_slot |= 0xC0;
+			} else {
+				rx_slot |= 0x80;
+				tx_slot |= 0x80;
+			}
+		}
+		if (bc & 2) {
+			hc->hw.conn &= 0xc7;
+			hc->hw.conn |= 0x08;
+			printk(KERN_DEBUG "%s: Write_hfc: B2_SSL 0x%x\n",
+				__func__, tx_slot);
+			printk(KERN_DEBUG "%s: Write_hfc: B2_RSL 0x%x\n",
+				__func__, rx_slot);
+			Write_hfc(hc, HFCPCI_B2_SSL, tx_slot);
+			Write_hfc(hc, HFCPCI_B2_RSL, rx_slot);
+		} else {
+			hc->hw.conn &= 0xf8;
+			hc->hw.conn |= 0x01;
+			printk(KERN_DEBUG "%s: Write_hfc: B1_SSL 0x%x\n",
+				__func__, tx_slot);
+			printk(KERN_DEBUG "%s: Write_hfc: B1_RSL 0x%x\n",
+				__func__, rx_slot);
+			Write_hfc(hc, HFCPCI_B1_SSL, tx_slot);
+			Write_hfc(hc, HFCPCI_B1_RSL, rx_slot);
+		}
+	}
+	Write_hfc(hc, HFCPCI_SCTRL_E, hc->hw.sctrl_e);
+	Write_hfc(hc, HFCPCI_INT_M1, hc->hw.int_m1);
+	Write_hfc(hc, HFCPCI_FIFO_EN, hc->hw.fifo_en);
+	Write_hfc(hc, HFCPCI_SCTRL, hc->hw.sctrl);
+	Write_hfc(hc, HFCPCI_SCTRL_R, hc->hw.sctrl_r);
+	Write_hfc(hc, HFCPCI_CTMT, hc->hw.ctmt);
+	Write_hfc(hc, HFCPCI_CONNECT, hc->hw.conn);
+#ifdef REVERSE_BITORDER
+	Write_hfc(hc, HFCPCI_CIRM, hc->hw.cirm);
+#endif
+	return 0;
+}
+
+static int
+set_hfcpci_rxtest(struct bchannel *bch, int protocol, int chan)
+{
+	struct hfc_pci	*hc = bch->hw;
+
+	if (bch->debug & DEBUG_HW_BCHANNEL)
+		printk(KERN_DEBUG
+		    "HFCPCI bchannel test rx protocol %x-->%x ch %x-->%x\n",
+		    bch->state, protocol, bch->nr, chan);
+	if (bch->nr != chan) {
+		printk(KERN_DEBUG
+		    "HFCPCI rxtest wrong channel parameter %x/%x\n",
+		    bch->nr, chan);
+		return -EINVAL;
+	}
+	switch (protocol) {
+	case (ISDN_P_B_RAW):
+		bch->state = protocol;
+		hfcpci_clear_fifo_rx(hc, (chan & 2)?1:0);
+		if (chan & 2) {
+			hc->hw.sctrl_r |= SCTRL_B2_ENA;
+			hc->hw.fifo_en |= HFCPCI_FIFOEN_B2RX;
+			hc->hw.int_m1 |= HFCPCI_INTS_B2REC;
+			hc->hw.ctmt |= 2;
+			hc->hw.conn &= ~0x18;
+#ifdef REVERSE_BITORDER
+			hc->hw.cirm |= 0x80;
+#endif
+		} else {
+			hc->hw.sctrl_r |= SCTRL_B1_ENA;
+			hc->hw.fifo_en |= HFCPCI_FIFOEN_B1RX;
+			hc->hw.int_m1 |= HFCPCI_INTS_B1REC;
+			hc->hw.ctmt |= 1;
+			hc->hw.conn &= ~0x03;
+#ifdef REVERSE_BITORDER
+			hc->hw.cirm |= 0x40;
+#endif
+		}
+		break;
+	case (ISDN_P_B_HDLC):
+		bch->state = protocol;
+		hfcpci_clear_fifo_rx(hc, (chan & 2)?1:0);
+		if (chan & 2) {
+			hc->hw.sctrl_r |= SCTRL_B2_ENA;
+			hc->hw.last_bfifo_cnt[1] = 0;
+			hc->hw.fifo_en |= HFCPCI_FIFOEN_B2RX;
+			hc->hw.int_m1 |= HFCPCI_INTS_B2REC;
+			hc->hw.ctmt &= ~2;
+			hc->hw.conn &= ~0x18;
+		} else {
+			hc->hw.sctrl_r |= SCTRL_B1_ENA;
+			hc->hw.last_bfifo_cnt[0] = 0;
+			hc->hw.fifo_en |= HFCPCI_FIFOEN_B1RX;
+			hc->hw.int_m1 |= HFCPCI_INTS_B1REC;
+			hc->hw.ctmt &= ~1;
+			hc->hw.conn &= ~0x03;
+		}
+		break;
+	default:
+		printk(KERN_DEBUG "prot not known %x\n", protocol);
+		return -ENOPROTOOPT;
+	}
+	Write_hfc(hc, HFCPCI_INT_M1, hc->hw.int_m1);
+	Write_hfc(hc, HFCPCI_FIFO_EN, hc->hw.fifo_en);
+	Write_hfc(hc, HFCPCI_SCTRL_R, hc->hw.sctrl_r);
+	Write_hfc(hc, HFCPCI_CTMT, hc->hw.ctmt);
+	Write_hfc(hc, HFCPCI_CONNECT, hc->hw.conn);
+#ifdef REVERSE_BITORDER
+	Write_hfc(hc, HFCPCI_CIRM, hc->hw.cirm);
+#endif
+	return 0;
+}
+
+static void
+deactivate_bchannel(struct bchannel *bch)
+{
+	struct hfc_pci	*hc = bch->hw;
+	u_long		flags;
+
+	spin_lock_irqsave(&hc->lock, flags);
+	if (test_and_clear_bit(FLG_TX_NEXT, &bch->Flags)) {
+		dev_kfree_skb(bch->next_skb);
+		bch->next_skb = NULL;
+	}
+	if (bch->tx_skb) {
+		dev_kfree_skb(bch->tx_skb);
+		bch->tx_skb = NULL;
+	}
+	bch->tx_idx = 0;
+	if (bch->rx_skb) {
+		dev_kfree_skb(bch->rx_skb);
+		bch->rx_skb = NULL;
+	}
+	mode_hfcpci(bch, bch->nr, ISDN_P_NONE);
+	test_and_clear_bit(FLG_ACTIVE, &bch->Flags);
+	test_and_clear_bit(FLG_TX_BUSY, &bch->Flags);
+	spin_unlock_irqrestore(&hc->lock, flags);
+}
+
+/*
+ * Layer 1 B-channel hardware access
+ */
+static int
+channel_bctrl(struct bchannel *bch, struct mISDN_ctrl_req *cq)
+{
+	int			ret = 0;
+
+	switch (cq->op) {
+	case MISDN_CTRL_GETOP:
+		cq->op = 0;
+		break;
+	default:
+		printk(KERN_WARNING "%s: unknown Op %x\n", __func__, cq->op);
+		ret = -EINVAL;
+		break;
+	}
+	return ret;
+}
+static int
+hfc_bctrl(struct mISDNchannel *ch, u_int cmd, void *arg)
+{
+	struct bchannel	*bch = container_of(ch, struct bchannel, ch);
+	struct hfc_pci	*hc = bch->hw;
+	int		ret = -EINVAL;
+	u_long		flags;
+
+	if (bch->debug & DEBUG_HW)
+		printk(KERN_DEBUG "%s: cmd:%x %p\n", __func__, cmd, arg);
+	switch (cmd) {
+	case HW_TESTRX_RAW:
+		spin_lock_irqsave(&hc->lock, flags);
+		ret = set_hfcpci_rxtest(bch, ISDN_P_B_RAW, (int)(long)arg);
+		spin_unlock_irqrestore(&hc->lock, flags);
+		break;
+	case HW_TESTRX_HDLC:
+		spin_lock_irqsave(&hc->lock, flags);
+		ret = set_hfcpci_rxtest(bch, ISDN_P_B_HDLC, (int)(long)arg);
+		spin_unlock_irqrestore(&hc->lock, flags);
+		break;
+	case HW_TESTRX_OFF:
+		spin_lock_irqsave(&hc->lock, flags);
+		mode_hfcpci(bch, bch->nr, ISDN_P_NONE);
+		spin_unlock_irqrestore(&hc->lock, flags);
+		ret = 0;
+		break;
+	case CLOSE_CHANNEL:
+		test_and_clear_bit(FLG_OPEN, &bch->Flags);
+		if (test_bit(FLG_ACTIVE, &bch->Flags))
+			deactivate_bchannel(bch);
+		ch->protocol = ISDN_P_NONE;
+		ch->peer = NULL;
+		module_put(THIS_MODULE);
+		ret = 0;
+		break;
+	case CONTROL_CHANNEL:
+		ret = channel_bctrl(bch, arg);
+		break;
+	default:
+		printk(KERN_WARNING "%s: unknown prim(%x)\n",
+			__func__, cmd);
+	}
+	return ret;
+}
+
+/*
+ * Layer2 -> Layer 1 Dchannel data
+ */
+static int
+hfcpci_l2l1D(struct mISDNchannel *ch, struct sk_buff *skb)
+{
+	struct mISDNdevice	*dev = container_of(ch, struct mISDNdevice, D);
+	struct dchannel		*dch = container_of(dev, struct dchannel, dev);
+	struct hfc_pci		*hc = dch->hw;
+	int			ret = -EINVAL;
+	struct mISDNhead	*hh = mISDN_HEAD_P(skb);
+	unsigned int		id;
+	u_long			flags;
+
+	switch (hh->prim) {
+	case PH_DATA_REQ:
+		spin_lock_irqsave(&hc->lock, flags);
+		ret = dchannel_senddata(dch, skb);
+		if (ret > 0) { /* direct TX */
+			id = hh->id; /* skb can be freed */
+			hfcpci_fill_dfifo(dch->hw);
+			ret = 0;
+			spin_unlock_irqrestore(&hc->lock, flags);
+			queue_ch_frame(ch, PH_DATA_CNF, id, NULL);
+		} else
+			spin_unlock_irqrestore(&hc->lock, flags);
+		return ret;
+	case PH_ACTIVATE_REQ:
+		spin_lock_irqsave(&hc->lock, flags);
+		if (hc->hw.protocol == ISDN_P_NT_S0) {
+			ret = 0;
+			if (test_bit(HFC_CFG_MASTER, &hc->cfg))
+				hc->hw.mst_m |= HFCPCI_MASTER;
+			Write_hfc(hc, HFCPCI_MST_MODE, hc->hw.mst_m);
+			if (test_bit(FLG_ACTIVE, &dch->Flags)) {
+				spin_unlock_irqrestore(&hc->lock, flags);
+				_queue_data(&dch->dev.D, PH_ACTIVATE_IND,
+				    MISDN_ID_ANY, 0, NULL, GFP_ATOMIC);
+				break;
+			}
+			test_and_set_bit(FLG_L2_ACTIVATED, &dch->Flags);
+			Write_hfc(hc, HFCPCI_STATES, HFCPCI_ACTIVATE |
+			    HFCPCI_DO_ACTION | 1);
+		} else
+			ret = l1_event(dch->l1, hh->prim);
+		spin_unlock_irqrestore(&hc->lock, flags);
+		break;
+	case PH_DEACTIVATE_REQ:
+		test_and_clear_bit(FLG_L2_ACTIVATED, &dch->Flags);
+		spin_lock_irqsave(&hc->lock, flags);
+		if (hc->hw.protocol == ISDN_P_NT_S0) {
+			/* prepare deactivation */
+			Write_hfc(hc, HFCPCI_STATES, 0x40);
+			skb_queue_purge(&dch->squeue);
+			if (dch->tx_skb) {
+				dev_kfree_skb(dch->tx_skb);
+				dch->tx_skb = NULL;
+			}
+			dch->tx_idx = 0;
+			if (dch->rx_skb) {
+				dev_kfree_skb(dch->rx_skb);
+				dch->rx_skb = NULL;
+			}
+			test_and_clear_bit(FLG_TX_BUSY, &dch->Flags);
+			if (test_and_clear_bit(FLG_BUSY_TIMER, &dch->Flags))
+				del_timer(&dch->timer);
+#ifdef FIXME
+			if (test_and_clear_bit(FLG_L1_BUSY, &dch->Flags))
+				dchannel_sched_event(&hc->dch, D_CLEARBUSY);
+#endif
+			hc->hw.mst_m &= ~HFCPCI_MASTER;
+			Write_hfc(hc, HFCPCI_MST_MODE, hc->hw.mst_m);
+			ret = 0;
+		} else {
+			ret = l1_event(dch->l1, hh->prim);
+		}
+		spin_unlock_irqrestore(&hc->lock, flags);
+		break;
+	}
+	if (!ret)
+		dev_kfree_skb(skb);
+	return ret;
+}
+
+/*
+ * Layer2 -> Layer 1 Bchannel data
+ */
+static int
+hfcpci_l2l1B(struct mISDNchannel *ch, struct sk_buff *skb)
+{
+	struct bchannel		*bch = container_of(ch, struct bchannel, ch);
+	struct hfc_pci		*hc = bch->hw;
+	int			ret = -EINVAL;
+	struct mISDNhead	*hh = mISDN_HEAD_P(skb);
+	unsigned int		id;
+	u_long			flags;
+
+	switch (hh->prim) {
+	case PH_DATA_REQ:
+		spin_lock_irqsave(&hc->lock, flags);
+		ret = bchannel_senddata(bch, skb);
+		if (ret > 0) { /* direct TX */
+			id = hh->id; /* skb can be freed */
+			hfcpci_fill_fifo(bch);
+			ret = 0;
+			spin_unlock_irqrestore(&hc->lock, flags);
+			if (!test_bit(FLG_TRANSPARENT, &bch->Flags))
+				queue_ch_frame(ch, PH_DATA_CNF, id, NULL);
+		} else
+			spin_unlock_irqrestore(&hc->lock, flags);
+		return ret;
+	case PH_ACTIVATE_REQ:
+		spin_lock_irqsave(&hc->lock, flags);
+		if (!test_and_set_bit(FLG_ACTIVE, &bch->Flags))
+			ret = mode_hfcpci(bch, bch->nr, ch->protocol);
+		else
+			ret = 0;
+		spin_unlock_irqrestore(&hc->lock, flags);
+		if (!ret)
+			_queue_data(ch, PH_ACTIVATE_IND, MISDN_ID_ANY, 0,
+				NULL, GFP_KERNEL);
+		break;
+	case PH_DEACTIVATE_REQ:
+		deactivate_bchannel(bch);
+		_queue_data(ch, PH_DEACTIVATE_IND, MISDN_ID_ANY, 0,
+			NULL, GFP_KERNEL);
+		ret = 0;
+		break;
+	}
+	if (!ret)
+		dev_kfree_skb(skb);
+	return ret;
+}
+
+/*
+ * called for card init message
+ */
+
+void
+inithfcpci(struct hfc_pci *hc)
+{
+	printk(KERN_DEBUG "inithfcpci: entered\n");
+	hc->dch.timer.function = (void *) hfcpci_dbusy_timer;
+	hc->dch.timer.data = (long) &hc->dch;
+	init_timer(&hc->dch.timer);
+	hc->chanlimit = 2;
+	mode_hfcpci(&hc->bch[0], 1, -1);
+	mode_hfcpci(&hc->bch[1], 2, -1);
+}
+
+
+static int
+init_card(struct hfc_pci *hc)
+{
+	int	cnt = 3;
+	u_long	flags;
+
+	printk(KERN_DEBUG "init_card: entered\n");
+
+
+	spin_lock_irqsave(&hc->lock, flags);
+	disable_hwirq(hc);
+	spin_unlock_irqrestore(&hc->lock, flags);
+	if (request_irq(hc->irq, hfcpci_int, IRQF_SHARED, "HFC PCI", hc)) {
+		printk(KERN_WARNING
+		    "mISDN: couldn't get interrupt %d\n", hc->irq);
+		return -EIO;
+	}
+	spin_lock_irqsave(&hc->lock, flags);
+	reset_hfcpci(hc);
+	while (cnt) {
+		inithfcpci(hc);
+		/*
+		 * Finally enable IRQ output
+		 * this is only allowed, if an IRQ routine is allready
+		 * established for this HFC, so don't do that earlier
+		 */
+		enable_hwirq(hc);
+		spin_unlock_irqrestore(&hc->lock, flags);
+		/* Timeout 80ms */
+		current->state = TASK_UNINTERRUPTIBLE;
+		schedule_timeout((80*HZ)/1000);
+		printk(KERN_INFO "HFC PCI: IRQ %d count %d\n",
+			hc->irq, hc->irqcnt);
+		/* now switch timer interrupt off */
+		spin_lock_irqsave(&hc->lock, flags);
+		hc->hw.int_m1 &= ~HFCPCI_INTS_TIMER;
+		Write_hfc(hc, HFCPCI_INT_M1, hc->hw.int_m1);
+		/* reinit mode reg */
+		Write_hfc(hc, HFCPCI_MST_MODE, hc->hw.mst_m);
+		if (!hc->irqcnt) {
+			printk(KERN_WARNING
+			    "HFC PCI: IRQ(%d) getting no interrupts "
+			    "during init %d\n", hc->irq, 4 - cnt);
+			if (cnt == 1) {
+				spin_unlock_irqrestore(&hc->lock, flags);
+				return -EIO;
+			} else {
+				reset_hfcpci(hc);
+				cnt--;
+			}
+		} else {
+			spin_unlock_irqrestore(&hc->lock, flags);
+			hc->initdone = 1;
+			return 0;
+		}
+	}
+	disable_hwirq(hc);
+	spin_unlock_irqrestore(&hc->lock, flags);
+	free_irq(hc->irq, hc);
+	return -EIO;
+}
+
+static int
+channel_ctrl(struct hfc_pci *hc, struct mISDN_ctrl_req *cq)
+{
+	int	ret = 0;
+	u_char	slot;
+
+	switch (cq->op) {
+	case MISDN_CTRL_GETOP:
+		cq->op = MISDN_CTRL_LOOP | MISDN_CTRL_CONNECT |
+		    MISDN_CTRL_DISCONNECT;
+		break;
+	case MISDN_CTRL_LOOP:
+		/* channel 0 disabled loop */
+		if (cq->channel < 0 || cq->channel > 2) {
+			ret = -EINVAL;
+			break;
+		}
+		if (cq->channel & 1) {
+			if (test_bit(HFC_CFG_SW_DD_DU, &hc->cfg))
+				slot = 0xC0;
+			else
+				slot = 0x80;
+			printk(KERN_DEBUG "%s: Write_hfc: B1_SSL/RSL 0x%x\n",
+			    __func__, slot);
+			Write_hfc(hc, HFCPCI_B1_SSL, slot);
+			Write_hfc(hc, HFCPCI_B1_RSL, slot);
+			hc->hw.conn = (hc->hw.conn & ~7) | 6;
+			Write_hfc(hc, HFCPCI_CONNECT, hc->hw.conn);
+		}
+		if (cq->channel & 2) {
+			if (test_bit(HFC_CFG_SW_DD_DU, &hc->cfg))
+				slot = 0xC1;
+			else
+				slot = 0x81;
+			printk(KERN_DEBUG "%s: Write_hfc: B2_SSL/RSL 0x%x\n",
+			    __func__, slot);
+			Write_hfc(hc, HFCPCI_B2_SSL, slot);
+			Write_hfc(hc, HFCPCI_B2_RSL, slot);
+			hc->hw.conn = (hc->hw.conn & ~0x38) | 0x30;
+			Write_hfc(hc, HFCPCI_CONNECT, hc->hw.conn);
+		}
+		if (cq->channel & 3)
+			hc->hw.trm |= 0x80;	/* enable IOM-loop */
+		else {
+			hc->hw.conn = (hc->hw.conn & ~0x3f) | 0x09;
+			Write_hfc(hc, HFCPCI_CONNECT, hc->hw.conn);
+			hc->hw.trm &= 0x7f;	/* disable IOM-loop */
+		}
+		Write_hfc(hc, HFCPCI_TRM, hc->hw.trm);
+		break;
+	case MISDN_CTRL_CONNECT:
+		if (cq->channel == cq->p1) {
+			ret = -EINVAL;
+			break;
+		}
+		if (cq->channel < 1 || cq->channel > 2 ||
+		    cq->p1 < 1 || cq->p1 > 2) {
+			ret = -EINVAL;
+			break;
+		}
+		if (test_bit(HFC_CFG_SW_DD_DU, &hc->cfg))
+			slot = 0xC0;
+		else
+			slot = 0x80;
+		printk(KERN_DEBUG "%s: Write_hfc: B1_SSL/RSL 0x%x\n",
+		    __func__, slot);
+		Write_hfc(hc, HFCPCI_B1_SSL, slot);
+		Write_hfc(hc, HFCPCI_B2_RSL, slot);
+		if (test_bit(HFC_CFG_SW_DD_DU, &hc->cfg))
+			slot = 0xC1;
+		else
+			slot = 0x81;
+		printk(KERN_DEBUG "%s: Write_hfc: B2_SSL/RSL 0x%x\n",
+		    __func__, slot);
+		Write_hfc(hc, HFCPCI_B2_SSL, slot);
+		Write_hfc(hc, HFCPCI_B1_RSL, slot);
+		hc->hw.conn = (hc->hw.conn & ~0x3f) | 0x36;
+		Write_hfc(hc, HFCPCI_CONNECT, hc->hw.conn);
+		hc->hw.trm |= 0x80;
+		Write_hfc(hc, HFCPCI_TRM, hc->hw.trm);
+		break;
+	case MISDN_CTRL_DISCONNECT:
+		hc->hw.conn = (hc->hw.conn & ~0x3f) | 0x09;
+		Write_hfc(hc, HFCPCI_CONNECT, hc->hw.conn);
+		hc->hw.trm &= 0x7f;	/* disable IOM-loop */
+		break;
+	default:
+		printk(KERN_WARNING "%s: unknown Op %x\n",
+		    __func__, cq->op);
+		ret = -EINVAL;
+		break;
+	}
+	return ret;
+}
+
+static int
+open_dchannel(struct hfc_pci *hc, struct mISDNchannel *ch,
+    struct channel_req *rq)
+{
+	int err = 0;
+
+	if (debug & DEBUG_HW_OPEN)
+		printk(KERN_DEBUG "%s: dev(%d) open from %p\n", __func__,
+		    hc->dch.dev.id, __builtin_return_address(0));
+	if (rq->protocol == ISDN_P_NONE)
+		return -EINVAL;
+	if (!hc->initdone) {
+		if (rq->protocol == ISDN_P_TE_S0) {
+			err = create_l1(&hc->dch, hfc_l1callback);
+			if (err)
+				return err;
+		}
+		hc->hw.protocol = rq->protocol;
+		ch->protocol = rq->protocol;
+		err = init_card(hc);
+		if (err)
+			return err;
+	} else {
+		if (rq->protocol != ch->protocol) {
+			if (hc->hw.protocol == ISDN_P_TE_S0)
+				l1_event(hc->dch.l1, CLOSE_CHANNEL);
+			hc->hw.protocol = rq->protocol;
+			ch->protocol = rq->protocol;
+			hfcpci_setmode(hc);
+		}
+	}
+
+	if (((ch->protocol == ISDN_P_NT_S0) && (hc->dch.state == 3)) ||
+	    ((ch->protocol == ISDN_P_TE_S0) && (hc->dch.state == 7))) {
+		_queue_data(ch, PH_ACTIVATE_IND, MISDN_ID_ANY,
+		    0, NULL, GFP_KERNEL);
+	}
+	rq->ch = ch;
+	if (!try_module_get(THIS_MODULE))
+		printk(KERN_WARNING "%s:cannot get module\n", __func__);
+	return 0;
+}
+
+static int
+open_bchannel(struct hfc_pci *hc, struct channel_req *rq)
+{
+	struct bchannel		*bch;
+
+	if (rq->adr.channel > 2)
+		return -EINVAL;
+	if (rq->protocol == ISDN_P_NONE)
+		return -EINVAL;
+	bch = &hc->bch[rq->adr.channel - 1];
+	if (test_and_set_bit(FLG_OPEN, &bch->Flags))
+		return -EBUSY; /* b-channel can be only open once */
+	bch->ch.protocol = rq->protocol;
+	rq->ch = &bch->ch; /* TODO: E-channel */
+	if (!try_module_get(THIS_MODULE))
+		printk(KERN_WARNING "%s:cannot get module\n", __func__);
+	return 0;
+}
+
+/*
+ * device control function
+ */
+static int
+hfc_dctrl(struct mISDNchannel *ch, u_int cmd, void *arg)
+{
+	struct mISDNdevice	*dev = container_of(ch, struct mISDNdevice, D);
+	struct dchannel		*dch = container_of(dev, struct dchannel, dev);
+	struct hfc_pci		*hc = dch->hw;
+	struct channel_req	*rq;
+	int			err = 0;
+
+	if (dch->debug & DEBUG_HW)
+		printk(KERN_DEBUG "%s: cmd:%x %p\n",
+		    __func__, cmd, arg);
+	switch (cmd) {
+	case OPEN_CHANNEL:
+		rq = arg;
+		if (rq->adr.channel == 0)
+			err = open_dchannel(hc, ch, rq);
+		else
+			err = open_bchannel(hc, rq);
+		break;
+	case CLOSE_CHANNEL:
+		if (debug & DEBUG_HW_OPEN)
+			printk(KERN_DEBUG "%s: dev(%d) close from %p\n",
+			    __func__, hc->dch.dev.id,
+			    __builtin_return_address(0));
+		module_put(THIS_MODULE);
+		break;
+	case CONTROL_CHANNEL:
+		err = channel_ctrl(hc, arg);
+		break;
+	default:
+		if (dch->debug & DEBUG_HW)
+			printk(KERN_DEBUG "%s: unknown command %x\n",
+			    __func__, cmd);
+		return -EINVAL;
+	}
+	return err;
+}
+
+static int
+setup_hw(struct hfc_pci *hc)
+{
+	void	*buffer;
+
+	printk(KERN_INFO "mISDN: HFC-PCI driver %s\n", hfcpci_revision);
+	hc->hw.cirm = 0;
+	hc->dch.state = 0;
+	pci_set_master(hc->pdev);
+	if (!hc->irq) {
+		printk(KERN_WARNING "HFC-PCI: No IRQ for PCI card found\n");
+		return 1;
+	}
+	hc->hw.pci_io = (char *)(ulong)hc->pdev->resource[1].start;
+
+	if (!hc->hw.pci_io) {
+		printk(KERN_WARNING "HFC-PCI: No IO-Mem for PCI card found\n");
+		return 1;
+	}
+	/* Allocate memory for FIFOS */
+	/* the memory needs to be on a 32k boundary within the first 4G */
+	pci_set_dma_mask(hc->pdev, 0xFFFF8000);
+	buffer = pci_alloc_consistent(hc->pdev, 0x8000, &hc->hw.dmahandle);
+	/* We silently assume the address is okay if nonzero */
+	if (!buffer) {
+		printk(KERN_WARNING
+		    "HFC-PCI: Error allocating memory for FIFO!\n");
+		return 1;
+	}
+	hc->hw.fifos = buffer;
+	pci_write_config_dword(hc->pdev, 0x80, hc->hw.dmahandle);
+	hc->hw.pci_io = ioremap((ulong) hc->hw.pci_io, 256);
+	printk(KERN_INFO
+		"HFC-PCI: defined at mem %#lx fifo %#lx(%#lx) IRQ %d HZ %d\n",
+		(u_long) hc->hw.pci_io, (u_long) hc->hw.fifos,
+		(u_long) hc->hw.dmahandle, hc->irq, HZ);
+	/* enable memory mapped ports, disable busmaster */
+	pci_write_config_word(hc->pdev, PCI_COMMAND, PCI_ENA_MEMIO);
+	hc->hw.int_m2 = 0;
+	disable_hwirq(hc);
+	hc->hw.int_m1 = 0;
+	Write_hfc(hc, HFCPCI_INT_M1, hc->hw.int_m1);
+	/* At this point the needed PCI config is done */
+	/* fifos are still not enabled */
+	hc->hw.timer.function = (void *) hfcpci_Timer;
+	hc->hw.timer.data = (long) hc;
+	init_timer(&hc->hw.timer);
+	/* default PCM master */
+	test_and_set_bit(HFC_CFG_MASTER, &hc->cfg);
+	return 0;
+}
+
+static void
+release_card(struct hfc_pci *hc) {
+	u_long	flags;
+
+	spin_lock_irqsave(&hc->lock, flags);
+	hc->hw.int_m2 = 0; /* interrupt output off ! */
+	disable_hwirq(hc);
+	mode_hfcpci(&hc->bch[0], 1, ISDN_P_NONE);
+	mode_hfcpci(&hc->bch[1], 2, ISDN_P_NONE);
+	if (hc->dch.timer.function != NULL) {
+		del_timer(&hc->dch.timer);
+		hc->dch.timer.function = NULL;
+	}
+	spin_unlock_irqrestore(&hc->lock, flags);
+	if (hc->hw.protocol == ISDN_P_TE_S0)
+		l1_event(hc->dch.l1, CLOSE_CHANNEL);
+	if (hc->initdone)
+		free_irq(hc->irq, hc);
+	release_io_hfcpci(hc); /* must release after free_irq! */
+	mISDN_unregister_device(&hc->dch.dev);
+	mISDN_freebchannel(&hc->bch[1]);
+	mISDN_freebchannel(&hc->bch[0]);
+	mISDN_freedchannel(&hc->dch);
+	list_del(&hc->list);
+	pci_set_drvdata(hc->pdev, NULL);
+	kfree(hc);
+}
+
+static int
+setup_card(struct hfc_pci *card)
+{
+	int		err = -EINVAL;
+	u_int		i;
+	u_long		flags;
+	char		name[MISDN_MAX_IDLEN];
+
+	if (HFC_cnt >= MAX_CARDS)
+		return -EINVAL; /* maybe better value */
+
+	card->dch.debug = debug;
+	spin_lock_init(&card->lock);
+	mISDN_initdchannel(&card->dch, MAX_DFRAME_LEN_L1, ph_state);
+	card->dch.hw = card;
+	card->dch.dev.Dprotocols = (1 << ISDN_P_TE_S0) | (1 << ISDN_P_NT_S0);
+	card->dch.dev.Bprotocols = (1 << (ISDN_P_B_RAW & ISDN_P_B_MASK)) |
+	    (1 << (ISDN_P_B_HDLC & ISDN_P_B_MASK));
+	card->dch.dev.D.send = hfcpci_l2l1D;
+	card->dch.dev.D.ctrl = hfc_dctrl;
+	card->dch.dev.nrbchan = 2;
+	for (i = 0; i < 2; i++) {
+		card->bch[i].nr = i + 1;
+		set_channelmap(i + 1, card->dch.dev.channelmap);
+		card->bch[i].debug = debug;
+		mISDN_initbchannel(&card->bch[i], MAX_DATA_MEM);
+		card->bch[i].hw = card;
+		card->bch[i].ch.send = hfcpci_l2l1B;
+		card->bch[i].ch.ctrl = hfc_bctrl;
+		card->bch[i].ch.nr = i + 1;
+		list_add(&card->bch[i].ch.list, &card->dch.dev.bchannels);
+	}
+	err = setup_hw(card);
+	if (err)
+		goto error;
+	snprintf(name, MISDN_MAX_IDLEN - 1, "hfc-pci.%d", HFC_cnt + 1);
+	err = mISDN_register_device(&card->dch.dev, name);
+	if (err)
+		goto error;
+	HFC_cnt++;
+	write_lock_irqsave(&HFClock, flags);
+	list_add_tail(&card->list, &HFClist);
+	write_unlock_irqrestore(&HFClock, flags);
+	printk(KERN_INFO "HFC %d cards installed\n", HFC_cnt);
+	return 0;
+error:
+	mISDN_freebchannel(&card->bch[1]);
+	mISDN_freebchannel(&card->bch[0]);
+	mISDN_freedchannel(&card->dch);
+	kfree(card);
+	return err;
+}
+
+/* private data in the PCI devices list */
+struct _hfc_map {
+	u_int	subtype;
+	u_int	flag;
+	char	*name;
+};
+
+static const struct _hfc_map hfc_map[] =
+{
+	{HFC_CCD_2BD0, 0, "CCD/Billion/Asuscom 2BD0"},
+	{HFC_CCD_B000, 0, "Billion B000"},
+	{HFC_CCD_B006, 0, "Billion B006"},
+	{HFC_CCD_B007, 0, "Billion B007"},
+	{HFC_CCD_B008, 0, "Billion B008"},
+	{HFC_CCD_B009, 0, "Billion B009"},
+	{HFC_CCD_B00A, 0, "Billion B00A"},
+	{HFC_CCD_B00B, 0, "Billion B00B"},
+	{HFC_CCD_B00C, 0, "Billion B00C"},
+	{HFC_CCD_B100, 0, "Seyeon B100"},
+	{HFC_CCD_B700, 0, "Primux II S0 B700"},
+	{HFC_CCD_B701, 0, "Primux II S0 NT B701"},
+	{HFC_ABOCOM_2BD1, 0, "Abocom/Magitek 2BD1"},
+	{HFC_ASUS_0675, 0, "Asuscom/Askey 675"},
+	{HFC_BERKOM_TCONCEPT, 0, "German telekom T-Concept"},
+	{HFC_BERKOM_A1T, 0, "German telekom A1T"},
+	{HFC_ANIGMA_MC145575, 0, "Motorola MC145575"},
+	{HFC_ZOLTRIX_2BD0, 0, "Zoltrix 2BD0"},
+	{HFC_DIGI_DF_M_IOM2_E, 0,
+	    "Digi International DataFire Micro V IOM2 (Europe)"},
+	{HFC_DIGI_DF_M_E, 0,
+	    "Digi International DataFire Micro V (Europe)"},
+	{HFC_DIGI_DF_M_IOM2_A, 0,
+	    "Digi International DataFire Micro V IOM2 (North America)"},
+	{HFC_DIGI_DF_M_A, 0,
+	    "Digi International DataFire Micro V (North America)"},
+	{HFC_SITECOM_DC105V2, 0, "Sitecom Connectivity DC-105 ISDN TA"},
+	{},
+};
+
+static struct pci_device_id hfc_ids[] =
+{
+	{PCI_VENDOR_ID_CCD, PCI_DEVICE_ID_CCD_2BD0,
+		PCI_ANY_ID, PCI_ANY_ID, 0, 0, (unsigned long) &hfc_map[0]},
+	{PCI_VENDOR_ID_CCD, PCI_DEVICE_ID_CCD_B000,
+		PCI_ANY_ID, PCI_ANY_ID, 0, 0, (unsigned long) &hfc_map[1]},
+	{PCI_VENDOR_ID_CCD, PCI_DEVICE_ID_CCD_B006,
+		PCI_ANY_ID, PCI_ANY_ID, 0, 0, (unsigned long) &hfc_map[2]},
+	{PCI_VENDOR_ID_CCD, PCI_DEVICE_ID_CCD_B007,
+		PCI_ANY_ID, PCI_ANY_ID, 0, 0, (unsigned long) &hfc_map[3]},
+	{PCI_VENDOR_ID_CCD, PCI_DEVICE_ID_CCD_B008,
+		PCI_ANY_ID, PCI_ANY_ID, 0, 0, (unsigned long) &hfc_map[4]},
+	{PCI_VENDOR_ID_CCD, PCI_DEVICE_ID_CCD_B009,
+		PCI_ANY_ID, PCI_ANY_ID, 0, 0, (unsigned long) &hfc_map[5]},
+	{PCI_VENDOR_ID_CCD, PCI_DEVICE_ID_CCD_B00A,
+		PCI_ANY_ID, PCI_ANY_ID, 0, 0, (unsigned long) &hfc_map[6]},
+	{PCI_VENDOR_ID_CCD, PCI_DEVICE_ID_CCD_B00B,
+		PCI_ANY_ID, PCI_ANY_ID, 0, 0, (unsigned long) &hfc_map[7]},
+	{PCI_VENDOR_ID_CCD, PCI_DEVICE_ID_CCD_B00C,
+		PCI_ANY_ID, PCI_ANY_ID, 0, 0, (unsigned long) &hfc_map[8]},
+	{PCI_VENDOR_ID_CCD, PCI_DEVICE_ID_CCD_B100,
+		PCI_ANY_ID, PCI_ANY_ID, 0, 0, (unsigned long) &hfc_map[9]},
+	{PCI_VENDOR_ID_CCD, PCI_DEVICE_ID_CCD_B700,
+		PCI_ANY_ID, PCI_ANY_ID, 0, 0, (unsigned long) &hfc_map[10]},
+	{PCI_VENDOR_ID_CCD, PCI_DEVICE_ID_CCD_B701,
+		PCI_ANY_ID, PCI_ANY_ID, 0, 0, (unsigned long) &hfc_map[11]},
+	{PCI_VENDOR_ID_ABOCOM, PCI_DEVICE_ID_ABOCOM_2BD1,
+		PCI_ANY_ID, PCI_ANY_ID, 0, 0, (unsigned long) &hfc_map[12]},
+	{PCI_VENDOR_ID_ASUSTEK, PCI_DEVICE_ID_ASUSTEK_0675,
+		PCI_ANY_ID, PCI_ANY_ID, 0, 0, (unsigned long) &hfc_map[13]},
+	{PCI_VENDOR_ID_BERKOM, PCI_DEVICE_ID_BERKOM_T_CONCEPT,
+		PCI_ANY_ID, PCI_ANY_ID, 0, 0, (unsigned long) &hfc_map[14]},
+	{PCI_VENDOR_ID_BERKOM, PCI_DEVICE_ID_BERKOM_A1T,
+		PCI_ANY_ID, PCI_ANY_ID, 0, 0, (unsigned long) &hfc_map[15]},
+	{PCI_VENDOR_ID_ANIGMA, PCI_DEVICE_ID_ANIGMA_MC145575,
+		PCI_ANY_ID, PCI_ANY_ID, 0, 0, (unsigned long) &hfc_map[16]},
+	{PCI_VENDOR_ID_ZOLTRIX, PCI_DEVICE_ID_ZOLTRIX_2BD0,
+		PCI_ANY_ID, PCI_ANY_ID, 0, 0, (unsigned long) &hfc_map[17]},
+	{PCI_VENDOR_ID_DIGI, PCI_DEVICE_ID_DIGI_DF_M_IOM2_E,
+		PCI_ANY_ID, PCI_ANY_ID, 0, 0, (unsigned long) &hfc_map[18]},
+	{PCI_VENDOR_ID_DIGI, PCI_DEVICE_ID_DIGI_DF_M_E,
+		PCI_ANY_ID, PCI_ANY_ID, 0, 0, (unsigned long) &hfc_map[19]},
+	{PCI_VENDOR_ID_DIGI, PCI_DEVICE_ID_DIGI_DF_M_IOM2_A,
+		PCI_ANY_ID, PCI_ANY_ID, 0, 0, (unsigned long) &hfc_map[20]},
+	{PCI_VENDOR_ID_DIGI, PCI_DEVICE_ID_DIGI_DF_M_A,
+		PCI_ANY_ID, PCI_ANY_ID, 0, 0, (unsigned long) &hfc_map[21]},
+	{PCI_VENDOR_ID_SITECOM, PCI_DEVICE_ID_SITECOM_DC105V2,
+		PCI_ANY_ID, PCI_ANY_ID, 0, 0, (unsigned long) &hfc_map[22]},
+	{},
+};
+
+static int __devinit
+hfc_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
+{
+	int		err = -ENOMEM;
+	struct hfc_pci	*card;
+	struct _hfc_map	*m = (struct _hfc_map *)ent->driver_data;
+
+	card = kzalloc(sizeof(struct hfc_pci), GFP_ATOMIC);
+	if (!card) {
+		printk(KERN_ERR "No kmem for HFC card\n");
+		return err;
+	}
+	card->pdev = pdev;
+	card->subtype = m->subtype;
+	err = pci_enable_device(pdev);
+	if (err) {
+		kfree(card);
+		return err;
+	}
+
+	printk(KERN_INFO "mISDN_hfcpci: found adapter %s at %s\n",
+	       m->name, pci_name(pdev));
+
+	card->irq = pdev->irq;
+	pci_set_drvdata(pdev, card);
+	err = setup_card(card);
+	if (err)
+		pci_set_drvdata(pdev, NULL);
+	return err;
+}
+
+static void __devexit
+hfc_remove_pci(struct pci_dev *pdev)
+{
+	struct hfc_pci	*card = pci_get_drvdata(pdev);
+	u_long		flags;
+
+	if (card) {
+		write_lock_irqsave(&HFClock, flags);
+		release_card(card);
+		write_unlock_irqrestore(&HFClock, flags);
+	} else
+		if (debug)
+			printk(KERN_WARNING "%s: drvdata allready removed\n",
+			    __func__);
+}
+
+
+static struct pci_driver hfc_driver = {
+	.name = "hfcpci",
+	.probe = hfc_probe,
+	.remove = __devexit_p(hfc_remove_pci),
+	.id_table = hfc_ids,
+};
+
+static int __init
+HFC_init(void)
+{
+	int		err;
+
+	err = pci_register_driver(&hfc_driver);
+	return err;
+}
+
+static void __exit
+HFC_cleanup(void)
+{
+	struct hfc_pci	*card, *next;
+
+	list_for_each_entry_safe(card, next, &HFClist, list) {
+		release_card(card);
+	}
+	pci_unregister_driver(&hfc_driver);
+}
+
+module_init(HFC_init);
+module_exit(HFC_cleanup);
diff --git a/drivers/isdn/hisax/hisax_fcpcipnp.c b/drivers/isdn/hisax/hisax_fcpcipnp.c
index c0b4db2f8364..1925118122f8 100644
--- a/drivers/isdn/hisax/hisax_fcpcipnp.c
+++ b/drivers/isdn/hisax/hisax_fcpcipnp.c
@@ -974,8 +974,6 @@ static struct pnp_driver fcpnp_driver = {
 	.remove		= __devexit_p(fcpnp_remove),
 	.id_table	= fcpnp_ids,
 };
-#else
-static struct pnp_driver fcpnp_driver;
 #endif
 
 static void __devexit fcpci_remove(struct pci_dev *pdev)
diff --git a/drivers/isdn/hisax/st5481.h b/drivers/isdn/hisax/st5481.h
index 2044e7173ab4..cff7a6354334 100644
--- a/drivers/isdn/hisax/st5481.h
+++ b/drivers/isdn/hisax/st5481.h
@@ -220,7 +220,7 @@ enum {
 #define ERR(format, arg...) \
 printk(KERN_ERR "%s:%s: " format "\n" , __FILE__,  __func__ , ## arg)
 
-#define WARN(format, arg...) \
+#define WARNING(format, arg...) \
 printk(KERN_WARNING "%s:%s: " format "\n" , __FILE__,  __func__ , ## arg)
 
 #define INFO(format, arg...) \
@@ -412,7 +412,7 @@ struct st5481_adapter {
 ({ \
 	int status; \
 	if ((status = usb_submit_urb(urb, mem_flags)) < 0) { \
-		WARN("usb_submit_urb failed,status=%d", status); \
+		WARNING("usb_submit_urb failed,status=%d", status); \
 	} \
         status; \
 })
diff --git a/drivers/isdn/hisax/st5481_b.c b/drivers/isdn/hisax/st5481_b.c
index fa64115cd7c7..0074b600a0ef 100644
--- a/drivers/isdn/hisax/st5481_b.c
+++ b/drivers/isdn/hisax/st5481_b.c
@@ -180,7 +180,7 @@ static void usb_b_out_complete(struct urb *urb)
 				DBG(4,"urb killed status %d", urb->status);
 				return; // Give up
 			default: 
-				WARN("urb status %d",urb->status);
+				WARNING("urb status %d",urb->status);
 				if (b_out->busy == 0) {
 					st5481_usb_pipe_reset(adapter, (bcs->channel+1)*2 | USB_DIR_OUT, NULL, NULL);
 				}
@@ -372,6 +372,6 @@ void st5481_b_l2l1(struct hisax_if *ifc, int pr, void *arg)
 		B_L1L2(bcs, PH_DEACTIVATE | INDICATION, NULL);
 		break;
 	default:
-		WARN("pr %#x\n", pr);
+		WARNING("pr %#x\n", pr);
 	}
 }
diff --git a/drivers/isdn/hisax/st5481_d.c b/drivers/isdn/hisax/st5481_d.c
index b8c4855cc889..077991c1cd05 100644
--- a/drivers/isdn/hisax/st5481_d.c
+++ b/drivers/isdn/hisax/st5481_d.c
@@ -389,7 +389,7 @@ static void usb_d_out_complete(struct urb *urb)
 				DBG(1,"urb killed status %d", urb->status);
 				break;
 			default: 
-				WARN("urb status %d",urb->status);
+				WARNING("urb status %d",urb->status);
 				if (d_out->busy == 0) {
 					st5481_usb_pipe_reset(adapter, EP_D_OUT | USB_DIR_OUT, fifo_reseted, adapter);
 				}
@@ -420,7 +420,7 @@ static void dout_start_xmit(struct FsmInst *fsm, int event, void *arg)
 	isdnhdlc_out_init(&d_out->hdlc_state, 1, 0);
 
 	if (test_and_set_bit(buf_nr, &d_out->busy)) {
-		WARN("ep %d urb %d busy %#lx", EP_D_OUT, buf_nr, d_out->busy);
+		WARNING("ep %d urb %d busy %#lx", EP_D_OUT, buf_nr, d_out->busy);
 		return;
 	}
 	urb = d_out->urb[buf_nr];
@@ -601,7 +601,7 @@ void st5481_d_l2l1(struct hisax_if *hisax_d_if, int pr, void *arg)
 		FsmEvent(&adapter->d_out.fsm, EV_DOUT_START_XMIT, NULL);
 		break;
 	default:
-		WARN("pr %#x\n", pr);
+		WARNING("pr %#x\n", pr);
 		break;
 	}
 }
diff --git a/drivers/isdn/hisax/st5481_usb.c b/drivers/isdn/hisax/st5481_usb.c
index 427a8b0520f5..ec3c0e507669 100644
--- a/drivers/isdn/hisax/st5481_usb.c
+++ b/drivers/isdn/hisax/st5481_usb.c
@@ -66,7 +66,7 @@ static void usb_ctrl_msg(struct st5481_adapter *adapter,
 	struct ctrl_msg *ctrl_msg;
 	
 	if ((w_index = fifo_add(&ctrl->msg_fifo.f)) < 0) {
-		WARN("control msg FIFO full");
+		WARNING("control msg FIFO full");
 		return;
 	}
 	ctrl_msg = &ctrl->msg_fifo.data[w_index]; 
@@ -139,7 +139,7 @@ static void usb_ctrl_complete(struct urb *urb)
 				DBG(1,"urb killed status %d", urb->status);
 				return; // Give up
 			default: 
-				WARN("urb status %d",urb->status);
+				WARNING("urb status %d",urb->status);
 				break;
 		}
 	}
@@ -198,7 +198,7 @@ static void usb_int_complete(struct urb *urb)
 			DBG(2, "urb shutting down with status: %d", urb->status);
 			return;
 		default:
-			WARN("nonzero urb status received: %d", urb->status);
+			WARNING("nonzero urb status received: %d", urb->status);
 			goto exit;
 	}
 
@@ -235,7 +235,7 @@ static void usb_int_complete(struct urb *urb)
 exit:
 	status = usb_submit_urb (urb, GFP_ATOMIC);
 	if (status)
-		WARN("usb_submit_urb failed with result %d", status);
+		WARNING("usb_submit_urb failed with result %d", status);
 }
 
 /* ======================================================================
@@ -257,7 +257,7 @@ int st5481_setup_usb(struct st5481_adapter *adapter)
 	DBG(2,"");
 	
 	if ((status = usb_reset_configuration (dev)) < 0) {
-		WARN("reset_configuration failed,status=%d",status);
+		WARNING("reset_configuration failed,status=%d",status);
 		return status;
 	}
 
@@ -269,7 +269,7 @@ int st5481_setup_usb(struct st5481_adapter *adapter)
 
 	// Check if the config is sane
 	if ( altsetting->desc.bNumEndpoints != 7 ) {
-		WARN("expecting 7 got %d endpoints!", altsetting->desc.bNumEndpoints);
+		WARNING("expecting 7 got %d endpoints!", altsetting->desc.bNumEndpoints);
 		return -EINVAL;
 	}
 
@@ -279,7 +279,7 @@ int st5481_setup_usb(struct st5481_adapter *adapter)
 
 	// Use alternative setting 3 on interface 0 to have 2B+D
 	if ((status = usb_set_interface (dev, 0, 3)) < 0) {
-		WARN("usb_set_interface failed,status=%d",status);
+		WARNING("usb_set_interface failed,status=%d",status);
 		return status;
 	}
 
@@ -497,7 +497,7 @@ static void usb_in_complete(struct urb *urb)
 				DBG(1,"urb killed status %d", urb->status);
 				return; // Give up
 			default: 
-				WARN("urb status %d",urb->status);
+				WARNING("urb status %d",urb->status);
 				break;
 		}
 	}
@@ -523,7 +523,7 @@ static void usb_in_complete(struct urb *urb)
 			DBG(4,"count=%d",status);
 			DBG_PACKET(0x400, in->rcvbuf, status);
 			if (!(skb = dev_alloc_skb(status))) {
-				WARN("receive out of memory\n");
+				WARNING("receive out of memory\n");
 				break;
 			}
 			memcpy(skb_put(skb, status), in->rcvbuf, status);
diff --git a/drivers/isdn/hysdn/hysdn_pof.h b/drivers/isdn/hysdn/hysdn_pof.h
index a368d6caca0e..3a72b908900f 100644
--- a/drivers/isdn/hysdn/hysdn_pof.h
+++ b/drivers/isdn/hysdn/hysdn_pof.h
@@ -60,7 +60,7 @@ typedef struct PofRecHdr_tag {	/* Pof record header */
 
 typedef struct PofTimeStamp_tag {
 /*00 */ unsigned long UnixTime __attribute__((packed));
-	/*04 */ unsigned char DateTimeText[0x28] __attribute__((packed));
+	/*04 */ unsigned char DateTimeText[0x28];
 	/* =40 */
 /*2C */
 } tPofTimeStamp;
diff --git a/drivers/isdn/mISDN/Kconfig b/drivers/isdn/mISDN/Kconfig
new file mode 100644
index 000000000000..4938355c4072
--- /dev/null
+++ b/drivers/isdn/mISDN/Kconfig
@@ -0,0 +1,44 @@
+#
+# modularer ISDN driver
+#
+
+menuconfig MISDN
+	tristate "Modular ISDN driver"
+	help
+	  Enable support for the modular ISDN driver.
+
+if MISDN != n
+
+config MISDN_DSP
+	tristate "Digital Audio Processing of transparent data"
+	depends on MISDN
+	help
+	  Enable support for digital audio processing capability.
+	  This module may be used for special applications that require
+	  cross connecting of bchannels, conferencing, dtmf decoding
+	  echo cancelation, tone generation, and Blowfish encryption and
+	  decryption.
+	  It may use hardware features if available.
+	  E.g. it is required for PBX4Linux. Go to http://isdn.eversberg.eu
+	  and get more informations about this module and it's usage.
+	  If unsure, say 'N'.
+
+config MISDN_L1OIP
+	tristate "ISDN over IP tunnel"
+	depends on MISDN
+	help
+	  Enable support for ISDN over IP tunnel.
+
+	  It features:
+	    - dynamic IP exchange, if one or both peers have dynamic IPs
+	    - BRI (S0) and PRI (S2M) interface
+	    - layer 1 control via network keepalive frames
+	    - direct tunneling of physical interface via IP
+
+	  NOTE: This protocol is called 'Layer 1 over IP' and is not
+	  compatible with ISDNoIP (Agfeo) or TDMoIP. Protocol description is
+	  provided in the source code.
+
+source "drivers/isdn/hardware/mISDN/Kconfig"
+
+endif #MISDN
diff --git a/drivers/isdn/mISDN/Makefile b/drivers/isdn/mISDN/Makefile
new file mode 100644
index 000000000000..1cb5e633cf75
--- /dev/null
+++ b/drivers/isdn/mISDN/Makefile
@@ -0,0 +1,13 @@
+#
+# Makefile for the modular ISDN driver
+#
+
+obj-$(CONFIG_MISDN) += mISDN_core.o
+obj-$(CONFIG_MISDN_DSP) += mISDN_dsp.o
+obj-$(CONFIG_MISDN_L1OIP) += l1oip.o
+
+# multi objects
+
+mISDN_core-objs := core.o fsm.o socket.o hwchannel.o stack.o layer1.o layer2.o tei.o timerdev.o
+mISDN_dsp-objs := dsp_core.o dsp_cmx.o dsp_tones.o dsp_dtmf.o dsp_audio.o dsp_blowfish.o dsp_pipeline.o dsp_hwec.o
+l1oip-objs := l1oip_core.o l1oip_codec.o
diff --git a/drivers/isdn/mISDN/core.c b/drivers/isdn/mISDN/core.c
new file mode 100644
index 000000000000..33068177b7c9
--- /dev/null
+++ b/drivers/isdn/mISDN/core.c
@@ -0,0 +1,244 @@
+/*
+ * Copyright 2008  by Karsten Keil <kkeil@novell.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <linux/types.h>
+#include <linux/stddef.h>
+#include <linux/module.h>
+#include <linux/spinlock.h>
+#include <linux/mISDNif.h>
+#include "core.h"
+
+static u_int debug;
+
+MODULE_AUTHOR("Karsten Keil");
+MODULE_LICENSE("GPL");
+module_param(debug, uint, S_IRUGO | S_IWUSR);
+
+static LIST_HEAD(devices);
+DEFINE_RWLOCK(device_lock);
+static u64		device_ids;
+#define MAX_DEVICE_ID	63
+
+static LIST_HEAD(Bprotocols);
+DEFINE_RWLOCK(bp_lock);
+
+struct mISDNdevice
+*get_mdevice(u_int id)
+{
+	struct mISDNdevice	*dev;
+
+	read_lock(&device_lock);
+	list_for_each_entry(dev, &devices, D.list)
+		if (dev->id == id) {
+			read_unlock(&device_lock);
+			return dev;
+		}
+	read_unlock(&device_lock);
+	return NULL;
+}
+
+int
+get_mdevice_count(void)
+{
+	struct mISDNdevice	*dev;
+	int			cnt = 0;
+
+	read_lock(&device_lock);
+	list_for_each_entry(dev, &devices, D.list)
+		cnt++;
+	read_unlock(&device_lock);
+	return cnt;
+}
+
+static int
+get_free_devid(void)
+{
+	u_int	i;
+
+	for (i = 0; i <= MAX_DEVICE_ID; i++)
+		if (!test_and_set_bit(i, (u_long *)&device_ids))
+			return i;
+	return -1;
+}
+
+int
+mISDN_register_device(struct mISDNdevice *dev, char *name)
+{
+	u_long	flags;
+	int	err;
+
+	dev->id = get_free_devid();
+	if (dev->id < 0)
+		return -EBUSY;
+	if (name && name[0])
+		strcpy(dev->name, name);
+	else
+		sprintf(dev->name, "mISDN%d", dev->id);
+	if (debug & DEBUG_CORE)
+		printk(KERN_DEBUG "mISDN_register %s %d\n",
+			dev->name, dev->id);
+	err = create_stack(dev);
+	if (err)
+		return err;
+	write_lock_irqsave(&device_lock, flags);
+	list_add_tail(&dev->D.list, &devices);
+	write_unlock_irqrestore(&device_lock, flags);
+	return 0;
+}
+EXPORT_SYMBOL(mISDN_register_device);
+
+void
+mISDN_unregister_device(struct mISDNdevice *dev) {
+	u_long	flags;
+
+	if (debug & DEBUG_CORE)
+		printk(KERN_DEBUG "mISDN_unregister %s %d\n",
+			dev->name, dev->id);
+	write_lock_irqsave(&device_lock, flags);
+	list_del(&dev->D.list);
+	write_unlock_irqrestore(&device_lock, flags);
+	test_and_clear_bit(dev->id, (u_long *)&device_ids);
+	delete_stack(dev);
+}
+EXPORT_SYMBOL(mISDN_unregister_device);
+
+u_int
+get_all_Bprotocols(void)
+{
+	struct Bprotocol	*bp;
+	u_int	m = 0;
+
+	read_lock(&bp_lock);
+	list_for_each_entry(bp, &Bprotocols, list)
+		m |= bp->Bprotocols;
+	read_unlock(&bp_lock);
+	return m;
+}
+
+struct Bprotocol *
+get_Bprotocol4mask(u_int m)
+{
+	struct Bprotocol	*bp;
+
+	read_lock(&bp_lock);
+	list_for_each_entry(bp, &Bprotocols, list)
+		if (bp->Bprotocols & m) {
+			read_unlock(&bp_lock);
+			return bp;
+		}
+	read_unlock(&bp_lock);
+	return NULL;
+}
+
+struct Bprotocol *
+get_Bprotocol4id(u_int id)
+{
+	u_int	m;
+
+	if (id < ISDN_P_B_START || id > 63) {
+		printk(KERN_WARNING "%s id not in range  %d\n",
+		    __func__, id);
+		return NULL;
+	}
+	m = 1 << (id & ISDN_P_B_MASK);
+	return get_Bprotocol4mask(m);
+}
+
+int
+mISDN_register_Bprotocol(struct Bprotocol *bp)
+{
+	u_long			flags;
+	struct Bprotocol	*old;
+
+	if (debug & DEBUG_CORE)
+		printk(KERN_DEBUG "%s: %s/%x\n", __func__,
+		    bp->name, bp->Bprotocols);
+	old = get_Bprotocol4mask(bp->Bprotocols);
+	if (old) {
+		printk(KERN_WARNING
+		    "register duplicate protocol old %s/%x new %s/%x\n",
+		    old->name, old->Bprotocols, bp->name, bp->Bprotocols);
+		return -EBUSY;
+	}
+	write_lock_irqsave(&bp_lock, flags);
+	list_add_tail(&bp->list, &Bprotocols);
+	write_unlock_irqrestore(&bp_lock, flags);
+	return 0;
+}
+EXPORT_SYMBOL(mISDN_register_Bprotocol);
+
+void
+mISDN_unregister_Bprotocol(struct Bprotocol *bp)
+{
+	u_long	flags;
+
+	if (debug & DEBUG_CORE)
+		printk(KERN_DEBUG "%s: %s/%x\n", __func__, bp->name,
+			bp->Bprotocols);
+	write_lock_irqsave(&bp_lock, flags);
+	list_del(&bp->list);
+	write_unlock_irqrestore(&bp_lock, flags);
+}
+EXPORT_SYMBOL(mISDN_unregister_Bprotocol);
+
+int
+mISDNInit(void)
+{
+	int	err;
+
+	printk(KERN_INFO "Modular ISDN core version %d.%d.%d\n",
+		MISDN_MAJOR_VERSION, MISDN_MINOR_VERSION, MISDN_RELEASE);
+	mISDN_initstack(&debug);
+	err = mISDN_inittimer(&debug);
+	if (err)
+		goto error;
+	err = l1_init(&debug);
+	if (err) {
+		mISDN_timer_cleanup();
+		goto error;
+	}
+	err = Isdnl2_Init(&debug);
+	if (err) {
+		mISDN_timer_cleanup();
+		l1_cleanup();
+		goto error;
+	}
+	err = misdn_sock_init(&debug);
+	if (err) {
+		mISDN_timer_cleanup();
+		l1_cleanup();
+		Isdnl2_cleanup();
+	}
+error:
+	return err;
+}
+
+void mISDN_cleanup(void)
+{
+	misdn_sock_cleanup();
+	mISDN_timer_cleanup();
+	l1_cleanup();
+	Isdnl2_cleanup();
+
+	if (!list_empty(&devices))
+		printk(KERN_ERR "%s devices still registered\n", __func__);
+
+	if (!list_empty(&Bprotocols))
+		printk(KERN_ERR "%s Bprotocols still registered\n", __func__);
+	printk(KERN_DEBUG "mISDNcore unloaded\n");
+}
+
+module_init(mISDNInit);
+module_exit(mISDN_cleanup);
+
diff --git a/drivers/isdn/mISDN/core.h b/drivers/isdn/mISDN/core.h
new file mode 100644
index 000000000000..7da7233b4c1a
--- /dev/null
+++ b/drivers/isdn/mISDN/core.h
@@ -0,0 +1,77 @@
+/*
+ * Copyright 2008  by Karsten Keil <kkeil@novell.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#ifndef mISDN_CORE_H
+#define mISDN_CORE_H
+
+extern struct mISDNdevice	*get_mdevice(u_int);
+extern int			get_mdevice_count(void);
+
+/* stack status flag */
+#define mISDN_STACK_ACTION_MASK		0x0000ffff
+#define mISDN_STACK_COMMAND_MASK	0x000f0000
+#define mISDN_STACK_STATUS_MASK		0xfff00000
+/* action bits 0-15 */
+#define mISDN_STACK_WORK	0
+#define mISDN_STACK_SETUP	1
+#define mISDN_STACK_CLEARING	2
+#define mISDN_STACK_RESTART	3
+#define mISDN_STACK_WAKEUP	4
+#define mISDN_STACK_ABORT	15
+/* command bits 16-19 */
+#define mISDN_STACK_STOPPED	16
+#define mISDN_STACK_INIT	17
+#define mISDN_STACK_THREADSTART	18
+/* status bits 20-31 */
+#define mISDN_STACK_BCHANNEL	20
+#define mISDN_STACK_ACTIVE      29
+#define mISDN_STACK_RUNNING     30
+#define mISDN_STACK_KILLED      31
+
+
+/* manager options */
+#define MGR_OPT_USER		24
+#define MGR_OPT_NETWORK		25
+
+extern int	connect_Bstack(struct mISDNdevice *, struct mISDNchannel *,
+			u_int, struct sockaddr_mISDN *);
+extern int	connect_layer1(struct mISDNdevice *, struct mISDNchannel *,
+			u_int, struct sockaddr_mISDN *);
+extern int	create_l2entity(struct mISDNdevice *, struct mISDNchannel *,
+			u_int, struct sockaddr_mISDN *);
+
+extern int	create_stack(struct mISDNdevice *);
+extern int	create_teimanager(struct mISDNdevice *);
+extern void	delete_teimanager(struct mISDNchannel *);
+extern void	delete_channel(struct mISDNchannel *);
+extern void	delete_stack(struct mISDNdevice *);
+extern void	mISDN_initstack(u_int *);
+extern int      misdn_sock_init(u_int *);
+extern void     misdn_sock_cleanup(void);
+extern void	add_layer2(struct mISDNchannel *, struct mISDNstack *);
+extern void	__add_layer2(struct mISDNchannel *, struct mISDNstack *);
+
+extern u_int		get_all_Bprotocols(void);
+struct Bprotocol	*get_Bprotocol4mask(u_int);
+struct Bprotocol	*get_Bprotocol4id(u_int);
+
+extern int	mISDN_inittimer(u_int *);
+extern void	mISDN_timer_cleanup(void);
+
+extern int	l1_init(u_int *);
+extern void	l1_cleanup(void);
+extern int 	Isdnl2_Init(u_int *);
+extern void	Isdnl2_cleanup(void);
+
+#endif
diff --git a/drivers/isdn/mISDN/dsp.h b/drivers/isdn/mISDN/dsp.h
new file mode 100644
index 000000000000..6c3fed6b8d4f
--- /dev/null
+++ b/drivers/isdn/mISDN/dsp.h
@@ -0,0 +1,263 @@
+/*
+ * Audio support data for ISDN4Linux.
+ *
+ * Copyright 2002/2003 by Andreas Eversberg (jolly@eversberg.eu)
+ *
+ * This software may be used and distributed according to the terms
+ * of the GNU General Public License, incorporated herein by reference.
+ *
+ */
+
+#define DEBUG_DSP_CTRL		0x0001
+#define DEBUG_DSP_CORE		0x0002
+#define DEBUG_DSP_DTMF		0x0004
+#define DEBUG_DSP_CMX		0x0010
+#define DEBUG_DSP_TONE		0x0020
+#define DEBUG_DSP_BLOWFISH	0x0040
+#define DEBUG_DSP_DELAY		0x0100
+#define DEBUG_DSP_DTMFCOEFF	0x8000 /* heavy output */
+
+/* options may be:
+ *
+ * bit 0 = use ulaw instead of alaw
+ * bit 1 = enable hfc hardware accelleration for all channels
+ *
+ */
+#define DSP_OPT_ULAW		(1<<0)
+#define DSP_OPT_NOHARDWARE	(1<<1)
+
+#include <linux/timer.h>
+#include <linux/workqueue.h>
+
+#include "dsp_ecdis.h"
+
+extern int dsp_options;
+extern int dsp_debug;
+extern int dsp_poll;
+extern int dsp_tics;
+extern spinlock_t dsp_lock;
+extern struct work_struct dsp_workq;
+extern u32 dsp_poll_diff; /* calculated fix-comma corrected poll value */
+
+/***************
+ * audio stuff *
+ ***************/
+
+extern s32 dsp_audio_alaw_to_s32[256];
+extern s32 dsp_audio_ulaw_to_s32[256];
+extern s32 *dsp_audio_law_to_s32;
+extern u8 dsp_audio_s16_to_law[65536];
+extern u8 dsp_audio_alaw_to_ulaw[256];
+extern u8 dsp_audio_mix_law[65536];
+extern u8 dsp_audio_seven2law[128];
+extern u8 dsp_audio_law2seven[256];
+extern void dsp_audio_generate_law_tables(void);
+extern void dsp_audio_generate_s2law_table(void);
+extern void dsp_audio_generate_seven(void);
+extern void dsp_audio_generate_mix_table(void);
+extern void dsp_audio_generate_ulaw_samples(void);
+extern void dsp_audio_generate_volume_changes(void);
+extern u8 dsp_silence;
+
+
+/*************
+ * cmx stuff *
+ *************/
+
+#define MAX_POLL	256	/* maximum number of send-chunks */
+
+#define CMX_BUFF_SIZE	0x8000	/* must be 2**n (0x1000 about 1/2 second) */
+#define CMX_BUFF_HALF	0x4000	/* CMX_BUFF_SIZE / 2 */
+#define CMX_BUFF_MASK	0x7fff	/* CMX_BUFF_SIZE - 1 */
+
+/* how many seconds will we check the lowest delay until the jitter buffer
+   is reduced by that delay */
+#define MAX_SECONDS_JITTER_CHECK 5
+
+extern struct timer_list dsp_spl_tl;
+extern u32 dsp_spl_jiffies;
+
+/* the structure of conferences:
+ *
+ * each conference has a unique number, given by user space.
+ * the conferences are linked in a chain.
+ * each conference has members linked in a chain.
+ * each dsplayer points to a member, each member points to a dsplayer.
+ */
+
+/* all members within a conference (this is linked 1:1 with the dsp) */
+struct dsp;
+struct dsp_conf_member {
+	struct list_head	list;
+	struct dsp		*dsp;
+};
+
+/* the list of all conferences */
+struct dsp_conf {
+	struct list_head	list;
+	u32			id;
+				/* all cmx stacks with the same ID are
+				 connected */
+	struct list_head	mlist;
+	int			software; /* conf is processed by software */
+	int			hardware; /* conf is processed by hardware */
+				/* note: if both unset, has only one member */
+};
+
+
+/**************
+ * DTMF stuff *
+ **************/
+
+#define DSP_DTMF_NPOINTS 102
+
+#define ECHOCAN_BUFLEN (4*128)
+
+struct dsp_dtmf {
+	int		treshold; /* above this is dtmf (square of) */
+	int		software; /* dtmf uses software decoding */
+	int		hardware; /* dtmf uses hardware decoding */
+	int		size; /* number of bytes in buffer */
+	signed short	buffer[DSP_DTMF_NPOINTS];
+		/* buffers one full dtmf frame */
+	u8		lastwhat, lastdigit;
+	int		count;
+	u8		digits[16]; /* just the dtmf result */
+};
+
+
+/******************
+ * pipeline stuff *
+ ******************/
+struct dsp_pipeline {
+	rwlock_t  lock;
+	struct list_head list;
+	int inuse;
+};
+
+/***************
+ * tones stuff *
+ ***************/
+
+struct dsp_tone {
+	int		software; /* tones are generated by software */
+	int		hardware; /* tones are generated by hardware */
+	int		tone;
+	void		*pattern;
+	int		count;
+	int		index;
+	struct timer_list tl;
+};
+
+/*****************
+ * general stuff *
+ *****************/
+
+struct dsp {
+	struct list_head list;
+	struct mISDNchannel	ch;
+	struct mISDNchannel	*up;
+	unsigned char	name[64];
+	int		b_active;
+	int		echo; /* echo is enabled */
+	int		rx_disabled; /* what the user wants */
+	int		rx_is_off; /* what the card is */
+	int		tx_mix;
+	struct dsp_tone	tone;
+	struct dsp_dtmf	dtmf;
+	int		tx_volume, rx_volume;
+
+	/* queue for sending frames */
+	struct work_struct	workq;
+	struct sk_buff_head	sendq;
+	int		hdlc;	/* if mode is hdlc */
+	int		data_pending;	/* currently an unconfirmed frame */
+
+	/* conference stuff */
+	u32		conf_id;
+	struct dsp_conf	*conf;
+	struct dsp_conf_member
+			*member;
+
+	/* buffer stuff */
+	int		rx_W; /* current write pos for data without timestamp */
+	int		rx_R; /* current read pos for transmit clock */
+	int		rx_init; /* if set, pointers will be adjusted first */
+	int		tx_W; /* current write pos for transmit data */
+	int		tx_R; /* current read pos for transmit clock */
+	int		rx_delay[MAX_SECONDS_JITTER_CHECK];
+	int		tx_delay[MAX_SECONDS_JITTER_CHECK];
+	u8		tx_buff[CMX_BUFF_SIZE];
+	u8		rx_buff[CMX_BUFF_SIZE];
+	int		last_tx; /* if set, we transmitted last poll interval */
+	int		cmx_delay; /* initial delay of buffers,
+				or 0 for dynamic jitter buffer */
+	int		tx_dejitter; /* if set, dejitter tx buffer */
+	int		tx_data; /* enables tx-data of CMX to upper layer */
+
+	/* hardware stuff */
+	struct dsp_features features;
+	int		features_rx_off; /* set if rx_off is featured */
+	int		pcm_slot_rx; /* current PCM slot (or -1) */
+	int		pcm_bank_rx;
+	int		pcm_slot_tx;
+	int		pcm_bank_tx;
+	int		hfc_conf; /* unique id of current conference (or -1) */
+
+	/* encryption stuff */
+	int		bf_enable;
+	u32		bf_p[18];
+	u32		bf_s[1024];
+	int		bf_crypt_pos;
+	u8		bf_data_in[9];
+	u8		bf_crypt_out[9];
+	int		bf_decrypt_in_pos;
+	int		bf_decrypt_out_pos;
+	u8		bf_crypt_inring[16];
+	u8		bf_data_out[9];
+	int		bf_sync;
+
+	struct dsp_pipeline
+			pipeline;
+};
+
+/* functions */
+
+extern void dsp_change_volume(struct sk_buff *skb, int volume);
+
+extern struct list_head dsp_ilist;
+extern struct list_head conf_ilist;
+extern void dsp_cmx_debug(struct dsp *dsp);
+extern void dsp_cmx_hardware(struct dsp_conf *conf, struct dsp *dsp);
+extern int dsp_cmx_conf(struct dsp *dsp, u32 conf_id);
+extern void dsp_cmx_receive(struct dsp *dsp, struct sk_buff *skb);
+extern void dsp_cmx_hdlc(struct dsp *dsp, struct sk_buff *skb);
+extern void dsp_cmx_send(void *arg);
+extern void dsp_cmx_transmit(struct dsp *dsp, struct sk_buff *skb);
+extern int dsp_cmx_del_conf_member(struct dsp *dsp);
+extern int dsp_cmx_del_conf(struct dsp_conf *conf);
+
+extern void dsp_dtmf_goertzel_init(struct dsp *dsp);
+extern void dsp_dtmf_hardware(struct dsp *dsp);
+extern u8 *dsp_dtmf_goertzel_decode(struct dsp *dsp, u8 *data, int len,
+		int fmt);
+
+extern int dsp_tone(struct dsp *dsp, int tone);
+extern void dsp_tone_copy(struct dsp *dsp, u8 *data, int len);
+extern void dsp_tone_timeout(void *arg);
+
+extern void dsp_bf_encrypt(struct dsp *dsp, u8 *data, int len);
+extern void dsp_bf_decrypt(struct dsp *dsp, u8 *data, int len);
+extern int dsp_bf_init(struct dsp *dsp, const u8 *key, unsigned int keylen);
+extern void dsp_bf_cleanup(struct dsp *dsp);
+
+extern int  dsp_pipeline_module_init(void);
+extern void dsp_pipeline_module_exit(void);
+extern int  dsp_pipeline_init(struct dsp_pipeline *pipeline);
+extern void dsp_pipeline_destroy(struct dsp_pipeline *pipeline);
+extern int  dsp_pipeline_build(struct dsp_pipeline *pipeline, const char *cfg);
+extern void dsp_pipeline_process_tx(struct dsp_pipeline *pipeline, u8 *data,
+		int len);
+extern void dsp_pipeline_process_rx(struct dsp_pipeline *pipeline, u8 *data,
+		int len);
+
diff --git a/drivers/isdn/mISDN/dsp_audio.c b/drivers/isdn/mISDN/dsp_audio.c
new file mode 100644
index 000000000000..1c2dd5694773
--- /dev/null
+++ b/drivers/isdn/mISDN/dsp_audio.c
@@ -0,0 +1,434 @@
+/*
+ * Audio support data for mISDN_dsp.
+ *
+ * Copyright 2002/2003 by Andreas Eversberg (jolly@eversberg.eu)
+ * Rewritten by Peter
+ *
+ * This software may be used and distributed according to the terms
+ * of the GNU General Public License, incorporated herein by reference.
+ *
+ */
+
+#include <linux/delay.h>
+#include <linux/mISDNif.h>
+#include <linux/mISDNdsp.h>
+#include "core.h"
+#include "dsp.h"
+
+/* ulaw[unsigned char] -> signed 16-bit */
+s32 dsp_audio_ulaw_to_s32[256];
+/* alaw[unsigned char] -> signed 16-bit */
+s32 dsp_audio_alaw_to_s32[256];
+
+s32 *dsp_audio_law_to_s32;
+EXPORT_SYMBOL(dsp_audio_law_to_s32);
+
+/* signed 16-bit -> law */
+u8 dsp_audio_s16_to_law[65536];
+EXPORT_SYMBOL(dsp_audio_s16_to_law);
+
+/* alaw -> ulaw */
+u8 dsp_audio_alaw_to_ulaw[256];
+/* ulaw -> alaw */
+u8 dsp_audio_ulaw_to_alaw[256];
+u8 dsp_silence;
+
+
+/*****************************************************
+ * generate table for conversion of s16 to alaw/ulaw *
+ *****************************************************/
+
+#define AMI_MASK 0x55
+
+static inline unsigned char linear2alaw(short int linear)
+{
+	int mask;
+	int seg;
+	int pcm_val;
+	static int seg_end[8] = {
+		0xFF, 0x1FF, 0x3FF, 0x7FF, 0xFFF, 0x1FFF, 0x3FFF, 0x7FFF
+	};
+
+	pcm_val = linear;
+	if (pcm_val >= 0) {
+		/* Sign (7th) bit = 1 */
+		mask = AMI_MASK | 0x80;
+	} else {
+		/* Sign bit = 0 */
+		mask = AMI_MASK;
+		pcm_val = -pcm_val;
+	}
+
+	/* Convert the scaled magnitude to segment number. */
+	for (seg = 0;  seg < 8;  seg++) {
+		if (pcm_val <= seg_end[seg])
+			break;
+	}
+	/* Combine the sign, segment, and quantization bits. */
+	return  ((seg << 4) |
+		 ((pcm_val >> ((seg)  ?  (seg + 3)  :  4)) & 0x0F)) ^ mask;
+}
+
+
+static inline short int alaw2linear(unsigned char alaw)
+{
+	int i;
+	int seg;
+
+	alaw ^= AMI_MASK;
+	i = ((alaw & 0x0F) << 4) + 8 /* rounding error */;
+	seg = (((int) alaw & 0x70) >> 4);
+	if (seg)
+		i = (i + 0x100) << (seg - 1);
+	return (short int) ((alaw & 0x80)  ?  i  :  -i);
+}
+
+static inline short int ulaw2linear(unsigned char ulaw)
+{
+	short mu, e, f, y;
+	static short etab[] = {0, 132, 396, 924, 1980, 4092, 8316, 16764};
+
+	mu = 255 - ulaw;
+	e = (mu & 0x70) / 16;
+	f = mu & 0x0f;
+	y = f * (1 << (e + 3));
+	y += etab[e];
+	if (mu & 0x80)
+		y = -y;
+	return y;
+}
+
+#define BIAS 0x84   /*!< define the add-in bias for 16 bit samples */
+
+static unsigned char linear2ulaw(short sample)
+{
+	static int exp_lut[256] = {
+		0, 0, 1, 1, 2, 2, 2, 2, 3, 3, 3, 3, 3, 3, 3, 3,
+		4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4,
+		5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5,
+		5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5,
+		6, 6, 6, 6, 6, 6, 6, 6, 6, 6, 6, 6, 6, 6, 6, 6,
+		6, 6, 6, 6, 6, 6, 6, 6, 6, 6, 6, 6, 6, 6, 6, 6,
+		6, 6, 6, 6, 6, 6, 6, 6, 6, 6, 6, 6, 6, 6, 6, 6,
+		6, 6, 6, 6, 6, 6, 6, 6, 6, 6, 6, 6, 6, 6, 6, 6,
+		7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7,
+		7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7,
+		7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7,
+		7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7,
+		7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7,
+		7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7,
+		7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7,
+		7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7};
+	int sign, exponent, mantissa;
+	unsigned char ulawbyte;
+
+	/* Get the sample into sign-magnitude. */
+	sign = (sample >> 8) & 0x80;	  /* set aside the sign */
+	if (sign != 0)
+		sample = -sample;	      /* get magnitude */
+
+	/* Convert from 16 bit linear to ulaw. */
+	sample = sample + BIAS;
+	exponent = exp_lut[(sample >> 7) & 0xFF];
+	mantissa = (sample >> (exponent + 3)) & 0x0F;
+	ulawbyte = ~(sign | (exponent << 4) | mantissa);
+
+	return ulawbyte;
+}
+
+static int reverse_bits(int i)
+{
+	int z, j;
+	z = 0;
+
+	for (j = 0; j < 8; j++) {
+		if ((i & (1 << j)) != 0)
+			z |= 1 << (7 - j);
+	}
+	return z;
+}
+
+
+void dsp_audio_generate_law_tables(void)
+{
+	int i;
+	for (i = 0; i < 256; i++)
+		dsp_audio_alaw_to_s32[i] = alaw2linear(reverse_bits(i));
+
+	for (i = 0; i < 256; i++)
+		dsp_audio_ulaw_to_s32[i] = ulaw2linear(reverse_bits(i));
+
+	for (i = 0; i < 256; i++) {
+		dsp_audio_alaw_to_ulaw[i] =
+			linear2ulaw(dsp_audio_alaw_to_s32[i]);
+		dsp_audio_ulaw_to_alaw[i] =
+			linear2alaw(dsp_audio_ulaw_to_s32[i]);
+	}
+}
+
+void
+dsp_audio_generate_s2law_table(void)
+{
+	int i;
+
+	if (dsp_options & DSP_OPT_ULAW) {
+		/* generating ulaw-table */
+		for (i = -32768; i < 32768; i++) {
+			dsp_audio_s16_to_law[i & 0xffff] =
+				reverse_bits(linear2ulaw(i));
+		}
+	} else {
+		/* generating alaw-table */
+		for (i = -32768; i < 32768; i++) {
+			dsp_audio_s16_to_law[i & 0xffff] =
+				reverse_bits(linear2alaw(i));
+		}
+	}
+}
+
+
+/*
+ * the seven bit sample is the number of every second alaw-sample ordered by
+ * aplitude. 0x00 is negative, 0x7f is positive amplitude.
+ */
+u8 dsp_audio_seven2law[128];
+u8 dsp_audio_law2seven[256];
+
+/********************************************************************
+ * generate table for conversion law from/to 7-bit alaw-like sample *
+ ********************************************************************/
+
+void
+dsp_audio_generate_seven(void)
+{
+	int i, j, k;
+	u8 spl;
+	u8 sorted_alaw[256];
+
+	/* generate alaw table, sorted by the linear value */
+	for (i = 0; i < 256; i++) {
+		j = 0;
+		for (k = 0; k < 256; k++) {
+			if (dsp_audio_alaw_to_s32[k]
+				< dsp_audio_alaw_to_s32[i]) {
+			j++;
+			}
+		}
+		sorted_alaw[j] = i;
+	}
+
+	/* generate tabels */
+	for (i = 0; i < 256; i++) {
+		/* spl is the source: the law-sample (converted to alaw) */
+		spl = i;
+		if (dsp_options & DSP_OPT_ULAW)
+			spl = dsp_audio_ulaw_to_alaw[i];
+		/* find the 7-bit-sample */
+		for (j = 0; j < 256; j++) {
+			if (sorted_alaw[j] == spl)
+				break;
+		}
+		/* write 7-bit audio value */
+		dsp_audio_law2seven[i] = j >> 1;
+	}
+	for (i = 0; i < 128; i++) {
+		spl = sorted_alaw[i << 1];
+		if (dsp_options & DSP_OPT_ULAW)
+			spl = dsp_audio_alaw_to_ulaw[spl];
+		dsp_audio_seven2law[i] = spl;
+	}
+}
+
+
+/* mix 2*law -> law */
+u8 dsp_audio_mix_law[65536];
+
+/******************************************************
+ * generate mix table to mix two law samples into one *
+ ******************************************************/
+
+void
+dsp_audio_generate_mix_table(void)
+{
+	int i, j;
+	s32 sample;
+
+	i = 0;
+	while (i < 256) {
+		j = 0;
+		while (j < 256) {
+			sample = dsp_audio_law_to_s32[i];
+			sample += dsp_audio_law_to_s32[j];
+			if (sample > 32767)
+				sample = 32767;
+			if (sample < -32768)
+				sample = -32768;
+			dsp_audio_mix_law[(i<<8)|j] =
+				dsp_audio_s16_to_law[sample & 0xffff];
+			j++;
+		}
+		i++;
+	}
+}
+
+
+/*************************************
+ * generate different volume changes *
+ *************************************/
+
+static u8 dsp_audio_reduce8[256];
+static u8 dsp_audio_reduce7[256];
+static u8 dsp_audio_reduce6[256];
+static u8 dsp_audio_reduce5[256];
+static u8 dsp_audio_reduce4[256];
+static u8 dsp_audio_reduce3[256];
+static u8 dsp_audio_reduce2[256];
+static u8 dsp_audio_reduce1[256];
+static u8 dsp_audio_increase1[256];
+static u8 dsp_audio_increase2[256];
+static u8 dsp_audio_increase3[256];
+static u8 dsp_audio_increase4[256];
+static u8 dsp_audio_increase5[256];
+static u8 dsp_audio_increase6[256];
+static u8 dsp_audio_increase7[256];
+static u8 dsp_audio_increase8[256];
+
+static u8 *dsp_audio_volume_change[16] = {
+	dsp_audio_reduce8,
+	dsp_audio_reduce7,
+	dsp_audio_reduce6,
+	dsp_audio_reduce5,
+	dsp_audio_reduce4,
+	dsp_audio_reduce3,
+	dsp_audio_reduce2,
+	dsp_audio_reduce1,
+	dsp_audio_increase1,
+	dsp_audio_increase2,
+	dsp_audio_increase3,
+	dsp_audio_increase4,
+	dsp_audio_increase5,
+	dsp_audio_increase6,
+	dsp_audio_increase7,
+	dsp_audio_increase8,
+};
+
+void
+dsp_audio_generate_volume_changes(void)
+{
+	register s32 sample;
+	int i;
+	int num[]   = { 110, 125, 150, 175, 200, 300, 400, 500 };
+	int denum[] = { 100, 100, 100, 100, 100, 100, 100, 100 };
+
+	i = 0;
+	while (i < 256) {
+		dsp_audio_reduce8[i] = dsp_audio_s16_to_law[
+			(dsp_audio_law_to_s32[i] * denum[7] / num[7]) & 0xffff];
+		dsp_audio_reduce7[i] = dsp_audio_s16_to_law[
+			(dsp_audio_law_to_s32[i] * denum[6] / num[6]) & 0xffff];
+		dsp_audio_reduce6[i] = dsp_audio_s16_to_law[
+			(dsp_audio_law_to_s32[i] * denum[5] / num[5]) & 0xffff];
+		dsp_audio_reduce5[i] = dsp_audio_s16_to_law[
+			(dsp_audio_law_to_s32[i] * denum[4] / num[4]) & 0xffff];
+		dsp_audio_reduce4[i] = dsp_audio_s16_to_law[
+			(dsp_audio_law_to_s32[i] * denum[3] / num[3]) & 0xffff];
+		dsp_audio_reduce3[i] = dsp_audio_s16_to_law[
+			(dsp_audio_law_to_s32[i] * denum[2] / num[2]) & 0xffff];
+		dsp_audio_reduce2[i] = dsp_audio_s16_to_law[
+			(dsp_audio_law_to_s32[i] * denum[1] / num[1]) & 0xffff];
+		dsp_audio_reduce1[i] = dsp_audio_s16_to_law[
+			(dsp_audio_law_to_s32[i] * denum[0] / num[0]) & 0xffff];
+		sample = dsp_audio_law_to_s32[i] * num[0] / denum[0];
+		if (sample < -32768)
+			sample = -32768;
+		else if (sample > 32767)
+			sample = 32767;
+		dsp_audio_increase1[i] = dsp_audio_s16_to_law[sample & 0xffff];
+		sample = dsp_audio_law_to_s32[i] * num[1] / denum[1];
+		if (sample < -32768)
+			sample = -32768;
+		else if (sample > 32767)
+			sample = 32767;
+		dsp_audio_increase2[i] = dsp_audio_s16_to_law[sample & 0xffff];
+		sample = dsp_audio_law_to_s32[i] * num[2] / denum[2];
+		if (sample < -32768)
+			sample = -32768;
+		else if (sample > 32767)
+			sample = 32767;
+		dsp_audio_increase3[i] = dsp_audio_s16_to_law[sample & 0xffff];
+		sample = dsp_audio_law_to_s32[i] * num[3] / denum[3];
+		if (sample < -32768)
+			sample = -32768;
+		else if (sample > 32767)
+			sample = 32767;
+		dsp_audio_increase4[i] = dsp_audio_s16_to_law[sample & 0xffff];
+		sample = dsp_audio_law_to_s32[i] * num[4] / denum[4];
+		if (sample < -32768)
+			sample = -32768;
+		else if (sample > 32767)
+			sample = 32767;
+		dsp_audio_increase5[i] = dsp_audio_s16_to_law[sample & 0xffff];
+		sample = dsp_audio_law_to_s32[i] * num[5] / denum[5];
+		if (sample < -32768)
+			sample = -32768;
+		else if (sample > 32767)
+			sample = 32767;
+		dsp_audio_increase6[i] = dsp_audio_s16_to_law[sample & 0xffff];
+		sample = dsp_audio_law_to_s32[i] * num[6] / denum[6];
+		if (sample < -32768)
+			sample = -32768;
+		else if (sample > 32767)
+			sample = 32767;
+		dsp_audio_increase7[i] = dsp_audio_s16_to_law[sample & 0xffff];
+		sample = dsp_audio_law_to_s32[i] * num[7] / denum[7];
+		if (sample < -32768)
+			sample = -32768;
+		else if (sample > 32767)
+			sample = 32767;
+		dsp_audio_increase8[i] = dsp_audio_s16_to_law[sample & 0xffff];
+
+		i++;
+	}
+}
+
+
+/**************************************
+ * change the volume of the given skb *
+ **************************************/
+
+/* this is a helper function for changing volume of skb. the range may be
+ * -8 to 8, which is a shift to the power of 2. 0 == no volume, 3 == volume*8
+ */
+void
+dsp_change_volume(struct sk_buff *skb, int volume)
+{
+	u8 *volume_change;
+	int i, ii;
+	u8 *p;
+	int shift;
+
+	if (volume == 0)
+		return;
+
+	/* get correct conversion table */
+	if (volume < 0) {
+		shift = volume + 8;
+		if (shift < 0)
+			shift = 0;
+	} else {
+		shift = volume + 7;
+		if (shift > 15)
+			shift = 15;
+	}
+	volume_change = dsp_audio_volume_change[shift];
+	i = 0;
+	ii = skb->len;
+	p = skb->data;
+	/* change volume */
+	while (i < ii) {
+		*p = volume_change[*p];
+		p++;
+		i++;
+	}
+}
+
diff --git a/drivers/isdn/mISDN/dsp_biquad.h b/drivers/isdn/mISDN/dsp_biquad.h
new file mode 100644
index 000000000000..038191bc45f5
--- /dev/null
+++ b/drivers/isdn/mISDN/dsp_biquad.h
@@ -0,0 +1,65 @@
+/*
+ * SpanDSP - a series of DSP components for telephony
+ *
+ * biquad.h - General telephony bi-quad section routines (currently this just
+ *            handles canonic/type 2 form)
+ *
+ * Written by Steve Underwood <steveu@coppice.org>
+ *
+ * Copyright (C) 2001 Steve Underwood
+ *
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ */
+
+struct biquad2_state {
+	int32_t gain;
+	int32_t a1;
+	int32_t a2;
+	int32_t b1;
+	int32_t b2;
+
+	int32_t z1;
+	int32_t z2;
+};
+
+static inline void biquad2_init(struct biquad2_state *bq,
+    int32_t gain, int32_t a1, int32_t a2, int32_t b1, int32_t b2)
+{
+	bq->gain = gain;
+	bq->a1 = a1;
+	bq->a2 = a2;
+	bq->b1 = b1;
+	bq->b2 = b2;
+
+	bq->z1 = 0;
+	bq->z2 = 0;
+}
+
+static inline int16_t biquad2(struct biquad2_state *bq, int16_t sample)
+{
+	int32_t y;
+	int32_t z0;
+
+	z0 = sample*bq->gain + bq->z1*bq->a1 + bq->z2*bq->a2;
+	y = z0 + bq->z1*bq->b1 + bq->z2*bq->b2;
+
+	bq->z2 = bq->z1;
+	bq->z1 = z0 >> 15;
+	y >>= 15;
+	return  y;
+}
diff --git a/drivers/isdn/mISDN/dsp_blowfish.c b/drivers/isdn/mISDN/dsp_blowfish.c
new file mode 100644
index 000000000000..18e411e95bba
--- /dev/null
+++ b/drivers/isdn/mISDN/dsp_blowfish.c
@@ -0,0 +1,672 @@
+/*
+ * Blowfish encryption/decryption for mISDN_dsp.
+ *
+ * Copyright Andreas Eversberg (jolly@eversberg.eu)
+ *
+ * This software may be used and distributed according to the terms
+ * of the GNU General Public License, incorporated herein by reference.
+ *
+ */
+
+#include <linux/mISDNif.h>
+#include <linux/mISDNdsp.h>
+#include "core.h"
+#include "dsp.h"
+
+/*
+ * how to encode a sample stream to 64-bit blocks that will be encryped
+ *
+ * first of all, data is collected until a block of 9 samples are received.
+ * of course, a packet may have much more than 9 sample, but is may have
+ * not excacly the multiple of 9 samples. if there is a rest, the next
+ * received data will complete the block.
+ *
+ * the block is then converted to 9 uLAW samples without the least sigificant
+ * bit. the result is a 7-bit encoded sample.
+ *
+ * the samples will be reoganised to form 8 bytes of data:
+ * (5(6) means: encoded sample no. 5, bit 6)
+ *
+ * 0(6) 0(5) 0(4) 0(3) 0(2) 0(1) 0(0) 1(6)
+ * 1(5) 1(4) 1(3) 1(2) 1(1) 1(0) 2(6) 2(5)
+ * 2(4) 2(3) 2(2) 2(1) 2(0) 3(6) 3(5) 3(4)
+ * 3(3) 3(2) 3(1) 3(0) 4(6) 4(5) 4(4) 4(3)
+ * 4(2) 4(1) 4(0) 5(6) 5(5) 5(4) 5(3) 5(2)
+ * 5(1) 5(0) 6(6) 6(5) 6(4) 6(3) 6(2) 6(1)
+ * 6(0) 7(6) 7(5) 7(4) 7(3) 7(2) 7(1) 7(0)
+ * 8(6) 8(5) 8(4) 8(3) 8(2) 8(1) 8(0)
+ *
+ * the missing bit 0 of the last byte is filled with some
+ * random noise, to fill all 8 bytes.
+ *
+ * the 8 bytes will be encrypted using blowfish.
+ *
+ * the result will be converted into 9 bytes. the bit 7 is used for
+ * checksumme (CS) for sync (0, 1) and for the last bit:
+ * (5(6) means: crypted byte 5, bit 6)
+ *
+ * 1    0(7) 0(6) 0(5) 0(4) 0(3) 0(2) 0(1)
+ * 0    0(0) 1(7) 1(6) 1(5) 1(4) 1(3) 1(2)
+ * 0    1(1) 1(0) 2(7) 2(6) 2(5) 2(4) 2(3)
+ * 0    2(2) 2(1) 2(0) 3(7) 3(6) 3(5) 3(4)
+ * 0    3(3) 3(2) 3(1) 3(0) 4(7) 4(6) 4(5)
+ * CS   4(4) 4(3) 4(2) 4(1) 4(0) 5(7) 5(6)
+ * CS   5(5) 5(4) 5(3) 5(2) 5(1) 5(0) 6(7)
+ * CS   6(6) 6(5) 6(4) 6(3) 6(2) 6(1) 6(0)
+ * 7(0) 7(6) 7(5) 7(4) 7(3) 7(2) 7(1) 7(0)
+ *
+ * the checksum is used to detect transmission errors and frame drops.
+ *
+ * synchronisation of received block is done by shifting the upper bit of each
+ * byte (bit 7) to a shift register. if the rigister has the first five bits
+ * (10000), this is used to find the sync. only if sync has been found, the
+ * current block of 9 received bytes are decrypted. before that the check
+ * sum is calculated. if it is incorrect the block is dropped.
+ * this will avoid loud noise due to corrupt encrypted data.
+ *
+ * if the last block is corrupt, the current decoded block is repeated
+ * until a valid block has been received.
+ */
+
+/*
+ *  some blowfish parts are taken from the
+ * crypto-api for faster implementation
+ */
+
+struct bf_ctx {
+	u32 p[18];
+	u32 s[1024];
+};
+
+static const u32 bf_pbox[16 + 2] = {
+	0x243f6a88, 0x85a308d3, 0x13198a2e, 0x03707344,
+	0xa4093822, 0x299f31d0, 0x082efa98, 0xec4e6c89,
+	0x452821e6, 0x38d01377, 0xbe5466cf, 0x34e90c6c,
+	0xc0ac29b7, 0xc97c50dd, 0x3f84d5b5, 0xb5470917,
+	0x9216d5d9, 0x8979fb1b,
+};
+
+static const u32 bf_sbox[256 * 4] = {
+	0xd1310ba6, 0x98dfb5ac, 0x2ffd72db, 0xd01adfb7,
+	0xb8e1afed, 0x6a267e96, 0xba7c9045, 0xf12c7f99,
+	0x24a19947, 0xb3916cf7, 0x0801f2e2, 0x858efc16,
+	0x636920d8, 0x71574e69, 0xa458fea3, 0xf4933d7e,
+	0x0d95748f, 0x728eb658, 0x718bcd58, 0x82154aee,
+	0x7b54a41d, 0xc25a59b5, 0x9c30d539, 0x2af26013,
+	0xc5d1b023, 0x286085f0, 0xca417918, 0xb8db38ef,
+	0x8e79dcb0, 0x603a180e, 0x6c9e0e8b, 0xb01e8a3e,
+	0xd71577c1, 0xbd314b27, 0x78af2fda, 0x55605c60,
+	0xe65525f3, 0xaa55ab94, 0x57489862, 0x63e81440,
+	0x55ca396a, 0x2aab10b6, 0xb4cc5c34, 0x1141e8ce,
+	0xa15486af, 0x7c72e993, 0xb3ee1411, 0x636fbc2a,
+	0x2ba9c55d, 0x741831f6, 0xce5c3e16, 0x9b87931e,
+	0xafd6ba33, 0x6c24cf5c, 0x7a325381, 0x28958677,
+	0x3b8f4898, 0x6b4bb9af, 0xc4bfe81b, 0x66282193,
+	0x61d809cc, 0xfb21a991, 0x487cac60, 0x5dec8032,
+	0xef845d5d, 0xe98575b1, 0xdc262302, 0xeb651b88,
+	0x23893e81, 0xd396acc5, 0x0f6d6ff3, 0x83f44239,
+	0x2e0b4482, 0xa4842004, 0x69c8f04a, 0x9e1f9b5e,
+	0x21c66842, 0xf6e96c9a, 0x670c9c61, 0xabd388f0,
+	0x6a51a0d2, 0xd8542f68, 0x960fa728, 0xab5133a3,
+	0x6eef0b6c, 0x137a3be4, 0xba3bf050, 0x7efb2a98,
+	0xa1f1651d, 0x39af0176, 0x66ca593e, 0x82430e88,
+	0x8cee8619, 0x456f9fb4, 0x7d84a5c3, 0x3b8b5ebe,
+	0xe06f75d8, 0x85c12073, 0x401a449f, 0x56c16aa6,
+	0x4ed3aa62, 0x363f7706, 0x1bfedf72, 0x429b023d,
+	0x37d0d724, 0xd00a1248, 0xdb0fead3, 0x49f1c09b,
+	0x075372c9, 0x80991b7b, 0x25d479d8, 0xf6e8def7,
+	0xe3fe501a, 0xb6794c3b, 0x976ce0bd, 0x04c006ba,
+	0xc1a94fb6, 0x409f60c4, 0x5e5c9ec2, 0x196a2463,
+	0x68fb6faf, 0x3e6c53b5, 0x1339b2eb, 0x3b52ec6f,
+	0x6dfc511f, 0x9b30952c, 0xcc814544, 0xaf5ebd09,
+	0xbee3d004, 0xde334afd, 0x660f2807, 0x192e4bb3,
+	0xc0cba857, 0x45c8740f, 0xd20b5f39, 0xb9d3fbdb,
+	0x5579c0bd, 0x1a60320a, 0xd6a100c6, 0x402c7279,
+	0x679f25fe, 0xfb1fa3cc, 0x8ea5e9f8, 0xdb3222f8,
+	0x3c7516df, 0xfd616b15, 0x2f501ec8, 0xad0552ab,
+	0x323db5fa, 0xfd238760, 0x53317b48, 0x3e00df82,
+	0x9e5c57bb, 0xca6f8ca0, 0x1a87562e, 0xdf1769db,
+	0xd542a8f6, 0x287effc3, 0xac6732c6, 0x8c4f5573,
+	0x695b27b0, 0xbbca58c8, 0xe1ffa35d, 0xb8f011a0,
+	0x10fa3d98, 0xfd2183b8, 0x4afcb56c, 0x2dd1d35b,
+	0x9a53e479, 0xb6f84565, 0xd28e49bc, 0x4bfb9790,
+	0xe1ddf2da, 0xa4cb7e33, 0x62fb1341, 0xcee4c6e8,
+	0xef20cada, 0x36774c01, 0xd07e9efe, 0x2bf11fb4,
+	0x95dbda4d, 0xae909198, 0xeaad8e71, 0x6b93d5a0,
+	0xd08ed1d0, 0xafc725e0, 0x8e3c5b2f, 0x8e7594b7,
+	0x8ff6e2fb, 0xf2122b64, 0x8888b812, 0x900df01c,
+	0x4fad5ea0, 0x688fc31c, 0xd1cff191, 0xb3a8c1ad,
+	0x2f2f2218, 0xbe0e1777, 0xea752dfe, 0x8b021fa1,
+	0xe5a0cc0f, 0xb56f74e8, 0x18acf3d6, 0xce89e299,
+	0xb4a84fe0, 0xfd13e0b7, 0x7cc43b81, 0xd2ada8d9,
+	0x165fa266, 0x80957705, 0x93cc7314, 0x211a1477,
+	0xe6ad2065, 0x77b5fa86, 0xc75442f5, 0xfb9d35cf,
+	0xebcdaf0c, 0x7b3e89a0, 0xd6411bd3, 0xae1e7e49,
+	0x00250e2d, 0x2071b35e, 0x226800bb, 0x57b8e0af,
+	0x2464369b, 0xf009b91e, 0x5563911d, 0x59dfa6aa,
+	0x78c14389, 0xd95a537f, 0x207d5ba2, 0x02e5b9c5,
+	0x83260376, 0x6295cfa9, 0x11c81968, 0x4e734a41,
+	0xb3472dca, 0x7b14a94a, 0x1b510052, 0x9a532915,
+	0xd60f573f, 0xbc9bc6e4, 0x2b60a476, 0x81e67400,
+	0x08ba6fb5, 0x571be91f, 0xf296ec6b, 0x2a0dd915,
+	0xb6636521, 0xe7b9f9b6, 0xff34052e, 0xc5855664,
+	0x53b02d5d, 0xa99f8fa1, 0x08ba4799, 0x6e85076a,
+	0x4b7a70e9, 0xb5b32944, 0xdb75092e, 0xc4192623,
+	0xad6ea6b0, 0x49a7df7d, 0x9cee60b8, 0x8fedb266,
+	0xecaa8c71, 0x699a17ff, 0x5664526c, 0xc2b19ee1,
+	0x193602a5, 0x75094c29, 0xa0591340, 0xe4183a3e,
+	0x3f54989a, 0x5b429d65, 0x6b8fe4d6, 0x99f73fd6,
+	0xa1d29c07, 0xefe830f5, 0x4d2d38e6, 0xf0255dc1,
+	0x4cdd2086, 0x8470eb26, 0x6382e9c6, 0x021ecc5e,
+	0x09686b3f, 0x3ebaefc9, 0x3c971814, 0x6b6a70a1,
+	0x687f3584, 0x52a0e286, 0xb79c5305, 0xaa500737,
+	0x3e07841c, 0x7fdeae5c, 0x8e7d44ec, 0x5716f2b8,
+	0xb03ada37, 0xf0500c0d, 0xf01c1f04, 0x0200b3ff,
+	0xae0cf51a, 0x3cb574b2, 0x25837a58, 0xdc0921bd,
+	0xd19113f9, 0x7ca92ff6, 0x94324773, 0x22f54701,
+	0x3ae5e581, 0x37c2dadc, 0xc8b57634, 0x9af3dda7,
+	0xa9446146, 0x0fd0030e, 0xecc8c73e, 0xa4751e41,
+	0xe238cd99, 0x3bea0e2f, 0x3280bba1, 0x183eb331,
+	0x4e548b38, 0x4f6db908, 0x6f420d03, 0xf60a04bf,
+	0x2cb81290, 0x24977c79, 0x5679b072, 0xbcaf89af,
+	0xde9a771f, 0xd9930810, 0xb38bae12, 0xdccf3f2e,
+	0x5512721f, 0x2e6b7124, 0x501adde6, 0x9f84cd87,
+	0x7a584718, 0x7408da17, 0xbc9f9abc, 0xe94b7d8c,
+	0xec7aec3a, 0xdb851dfa, 0x63094366, 0xc464c3d2,
+	0xef1c1847, 0x3215d908, 0xdd433b37, 0x24c2ba16,
+	0x12a14d43, 0x2a65c451, 0x50940002, 0x133ae4dd,
+	0x71dff89e, 0x10314e55, 0x81ac77d6, 0x5f11199b,
+	0x043556f1, 0xd7a3c76b, 0x3c11183b, 0x5924a509,
+	0xf28fe6ed, 0x97f1fbfa, 0x9ebabf2c, 0x1e153c6e,
+	0x86e34570, 0xeae96fb1, 0x860e5e0a, 0x5a3e2ab3,
+	0x771fe71c, 0x4e3d06fa, 0x2965dcb9, 0x99e71d0f,
+	0x803e89d6, 0x5266c825, 0x2e4cc978, 0x9c10b36a,
+	0xc6150eba, 0x94e2ea78, 0xa5fc3c53, 0x1e0a2df4,
+	0xf2f74ea7, 0x361d2b3d, 0x1939260f, 0x19c27960,
+	0x5223a708, 0xf71312b6, 0xebadfe6e, 0xeac31f66,
+	0xe3bc4595, 0xa67bc883, 0xb17f37d1, 0x018cff28,
+	0xc332ddef, 0xbe6c5aa5, 0x65582185, 0x68ab9802,
+	0xeecea50f, 0xdb2f953b, 0x2aef7dad, 0x5b6e2f84,
+	0x1521b628, 0x29076170, 0xecdd4775, 0x619f1510,
+	0x13cca830, 0xeb61bd96, 0x0334fe1e, 0xaa0363cf,
+	0xb5735c90, 0x4c70a239, 0xd59e9e0b, 0xcbaade14,
+	0xeecc86bc, 0x60622ca7, 0x9cab5cab, 0xb2f3846e,
+	0x648b1eaf, 0x19bdf0ca, 0xa02369b9, 0x655abb50,
+	0x40685a32, 0x3c2ab4b3, 0x319ee9d5, 0xc021b8f7,
+	0x9b540b19, 0x875fa099, 0x95f7997e, 0x623d7da8,
+	0xf837889a, 0x97e32d77, 0x11ed935f, 0x16681281,
+	0x0e358829, 0xc7e61fd6, 0x96dedfa1, 0x7858ba99,
+	0x57f584a5, 0x1b227263, 0x9b83c3ff, 0x1ac24696,
+	0xcdb30aeb, 0x532e3054, 0x8fd948e4, 0x6dbc3128,
+	0x58ebf2ef, 0x34c6ffea, 0xfe28ed61, 0xee7c3c73,
+	0x5d4a14d9, 0xe864b7e3, 0x42105d14, 0x203e13e0,
+	0x45eee2b6, 0xa3aaabea, 0xdb6c4f15, 0xfacb4fd0,
+	0xc742f442, 0xef6abbb5, 0x654f3b1d, 0x41cd2105,
+	0xd81e799e, 0x86854dc7, 0xe44b476a, 0x3d816250,
+	0xcf62a1f2, 0x5b8d2646, 0xfc8883a0, 0xc1c7b6a3,
+	0x7f1524c3, 0x69cb7492, 0x47848a0b, 0x5692b285,
+	0x095bbf00, 0xad19489d, 0x1462b174, 0x23820e00,
+	0x58428d2a, 0x0c55f5ea, 0x1dadf43e, 0x233f7061,
+	0x3372f092, 0x8d937e41, 0xd65fecf1, 0x6c223bdb,
+	0x7cde3759, 0xcbee7460, 0x4085f2a7, 0xce77326e,
+	0xa6078084, 0x19f8509e, 0xe8efd855, 0x61d99735,
+	0xa969a7aa, 0xc50c06c2, 0x5a04abfc, 0x800bcadc,
+	0x9e447a2e, 0xc3453484, 0xfdd56705, 0x0e1e9ec9,
+	0xdb73dbd3, 0x105588cd, 0x675fda79, 0xe3674340,
+	0xc5c43465, 0x713e38d8, 0x3d28f89e, 0xf16dff20,
+	0x153e21e7, 0x8fb03d4a, 0xe6e39f2b, 0xdb83adf7,
+	0xe93d5a68, 0x948140f7, 0xf64c261c, 0x94692934,
+	0x411520f7, 0x7602d4f7, 0xbcf46b2e, 0xd4a20068,
+	0xd4082471, 0x3320f46a, 0x43b7d4b7, 0x500061af,
+	0x1e39f62e, 0x97244546, 0x14214f74, 0xbf8b8840,
+	0x4d95fc1d, 0x96b591af, 0x70f4ddd3, 0x66a02f45,
+	0xbfbc09ec, 0x03bd9785, 0x7fac6dd0, 0x31cb8504,
+	0x96eb27b3, 0x55fd3941, 0xda2547e6, 0xabca0a9a,
+	0x28507825, 0x530429f4, 0x0a2c86da, 0xe9b66dfb,
+	0x68dc1462, 0xd7486900, 0x680ec0a4, 0x27a18dee,
+	0x4f3ffea2, 0xe887ad8c, 0xb58ce006, 0x7af4d6b6,
+	0xaace1e7c, 0xd3375fec, 0xce78a399, 0x406b2a42,
+	0x20fe9e35, 0xd9f385b9, 0xee39d7ab, 0x3b124e8b,
+	0x1dc9faf7, 0x4b6d1856, 0x26a36631, 0xeae397b2,
+	0x3a6efa74, 0xdd5b4332, 0x6841e7f7, 0xca7820fb,
+	0xfb0af54e, 0xd8feb397, 0x454056ac, 0xba489527,
+	0x55533a3a, 0x20838d87, 0xfe6ba9b7, 0xd096954b,
+	0x55a867bc, 0xa1159a58, 0xcca92963, 0x99e1db33,
+	0xa62a4a56, 0x3f3125f9, 0x5ef47e1c, 0x9029317c,
+	0xfdf8e802, 0x04272f70, 0x80bb155c, 0x05282ce3,
+	0x95c11548, 0xe4c66d22, 0x48c1133f, 0xc70f86dc,
+	0x07f9c9ee, 0x41041f0f, 0x404779a4, 0x5d886e17,
+	0x325f51eb, 0xd59bc0d1, 0xf2bcc18f, 0x41113564,
+	0x257b7834, 0x602a9c60, 0xdff8e8a3, 0x1f636c1b,
+	0x0e12b4c2, 0x02e1329e, 0xaf664fd1, 0xcad18115,
+	0x6b2395e0, 0x333e92e1, 0x3b240b62, 0xeebeb922,
+	0x85b2a20e, 0xe6ba0d99, 0xde720c8c, 0x2da2f728,
+	0xd0127845, 0x95b794fd, 0x647d0862, 0xe7ccf5f0,
+	0x5449a36f, 0x877d48fa, 0xc39dfd27, 0xf33e8d1e,
+	0x0a476341, 0x992eff74, 0x3a6f6eab, 0xf4f8fd37,
+	0xa812dc60, 0xa1ebddf8, 0x991be14c, 0xdb6e6b0d,
+	0xc67b5510, 0x6d672c37, 0x2765d43b, 0xdcd0e804,
+	0xf1290dc7, 0xcc00ffa3, 0xb5390f92, 0x690fed0b,
+	0x667b9ffb, 0xcedb7d9c, 0xa091cf0b, 0xd9155ea3,
+	0xbb132f88, 0x515bad24, 0x7b9479bf, 0x763bd6eb,
+	0x37392eb3, 0xcc115979, 0x8026e297, 0xf42e312d,
+	0x6842ada7, 0xc66a2b3b, 0x12754ccc, 0x782ef11c,
+	0x6a124237, 0xb79251e7, 0x06a1bbe6, 0x4bfb6350,
+	0x1a6b1018, 0x11caedfa, 0x3d25bdd8, 0xe2e1c3c9,
+	0x44421659, 0x0a121386, 0xd90cec6e, 0xd5abea2a,
+	0x64af674e, 0xda86a85f, 0xbebfe988, 0x64e4c3fe,
+	0x9dbc8057, 0xf0f7c086, 0x60787bf8, 0x6003604d,
+	0xd1fd8346, 0xf6381fb0, 0x7745ae04, 0xd736fccc,
+	0x83426b33, 0xf01eab71, 0xb0804187, 0x3c005e5f,
+	0x77a057be, 0xbde8ae24, 0x55464299, 0xbf582e61,
+	0x4e58f48f, 0xf2ddfda2, 0xf474ef38, 0x8789bdc2,
+	0x5366f9c3, 0xc8b38e74, 0xb475f255, 0x46fcd9b9,
+	0x7aeb2661, 0x8b1ddf84, 0x846a0e79, 0x915f95e2,
+	0x466e598e, 0x20b45770, 0x8cd55591, 0xc902de4c,
+	0xb90bace1, 0xbb8205d0, 0x11a86248, 0x7574a99e,
+	0xb77f19b6, 0xe0a9dc09, 0x662d09a1, 0xc4324633,
+	0xe85a1f02, 0x09f0be8c, 0x4a99a025, 0x1d6efe10,
+	0x1ab93d1d, 0x0ba5a4df, 0xa186f20f, 0x2868f169,
+	0xdcb7da83, 0x573906fe, 0xa1e2ce9b, 0x4fcd7f52,
+	0x50115e01, 0xa70683fa, 0xa002b5c4, 0x0de6d027,
+	0x9af88c27, 0x773f8641, 0xc3604c06, 0x61a806b5,
+	0xf0177a28, 0xc0f586e0, 0x006058aa, 0x30dc7d62,
+	0x11e69ed7, 0x2338ea63, 0x53c2dd94, 0xc2c21634,
+	0xbbcbee56, 0x90bcb6de, 0xebfc7da1, 0xce591d76,
+	0x6f05e409, 0x4b7c0188, 0x39720a3d, 0x7c927c24,
+	0x86e3725f, 0x724d9db9, 0x1ac15bb4, 0xd39eb8fc,
+	0xed545578, 0x08fca5b5, 0xd83d7cd3, 0x4dad0fc4,
+	0x1e50ef5e, 0xb161e6f8, 0xa28514d9, 0x6c51133c,
+	0x6fd5c7e7, 0x56e14ec4, 0x362abfce, 0xddc6c837,
+	0xd79a3234, 0x92638212, 0x670efa8e, 0x406000e0,
+	0x3a39ce37, 0xd3faf5cf, 0xabc27737, 0x5ac52d1b,
+	0x5cb0679e, 0x4fa33742, 0xd3822740, 0x99bc9bbe,
+	0xd5118e9d, 0xbf0f7315, 0xd62d1c7e, 0xc700c47b,
+	0xb78c1b6b, 0x21a19045, 0xb26eb1be, 0x6a366eb4,
+	0x5748ab2f, 0xbc946e79, 0xc6a376d2, 0x6549c2c8,
+	0x530ff8ee, 0x468dde7d, 0xd5730a1d, 0x4cd04dc6,
+	0x2939bbdb, 0xa9ba4650, 0xac9526e8, 0xbe5ee304,
+	0xa1fad5f0, 0x6a2d519a, 0x63ef8ce2, 0x9a86ee22,
+	0xc089c2b8, 0x43242ef6, 0xa51e03aa, 0x9cf2d0a4,
+	0x83c061ba, 0x9be96a4d, 0x8fe51550, 0xba645bd6,
+	0x2826a2f9, 0xa73a3ae1, 0x4ba99586, 0xef5562e9,
+	0xc72fefd3, 0xf752f7da, 0x3f046f69, 0x77fa0a59,
+	0x80e4a915, 0x87b08601, 0x9b09e6ad, 0x3b3ee593,
+	0xe990fd5a, 0x9e34d797, 0x2cf0b7d9, 0x022b8b51,
+	0x96d5ac3a, 0x017da67d, 0xd1cf3ed6, 0x7c7d2d28,
+	0x1f9f25cf, 0xadf2b89b, 0x5ad6b472, 0x5a88f54c,
+	0xe029ac71, 0xe019a5e6, 0x47b0acfd, 0xed93fa9b,
+	0xe8d3c48d, 0x283b57cc, 0xf8d56629, 0x79132e28,
+	0x785f0191, 0xed756055, 0xf7960e44, 0xe3d35e8c,
+	0x15056dd4, 0x88f46dba, 0x03a16125, 0x0564f0bd,
+	0xc3eb9e15, 0x3c9057a2, 0x97271aec, 0xa93a072a,
+	0x1b3f6d9b, 0x1e6321f5, 0xf59c66fb, 0x26dcf319,
+	0x7533d928, 0xb155fdf5, 0x03563482, 0x8aba3cbb,
+	0x28517711, 0xc20ad9f8, 0xabcc5167, 0xccad925f,
+	0x4de81751, 0x3830dc8e, 0x379d5862, 0x9320f991,
+	0xea7a90c2, 0xfb3e7bce, 0x5121ce64, 0x774fbe32,
+	0xa8b6e37e, 0xc3293d46, 0x48de5369, 0x6413e680,
+	0xa2ae0810, 0xdd6db224, 0x69852dfd, 0x09072166,
+	0xb39a460a, 0x6445c0dd, 0x586cdecf, 0x1c20c8ae,
+	0x5bbef7dd, 0x1b588d40, 0xccd2017f, 0x6bb4e3bb,
+	0xdda26a7e, 0x3a59ff45, 0x3e350a44, 0xbcb4cdd5,
+	0x72eacea8, 0xfa6484bb, 0x8d6612ae, 0xbf3c6f47,
+	0xd29be463, 0x542f5d9e, 0xaec2771b, 0xf64e6370,
+	0x740e0d8d, 0xe75b1357, 0xf8721671, 0xaf537d5d,
+	0x4040cb08, 0x4eb4e2cc, 0x34d2466a, 0x0115af84,
+	0xe1b00428, 0x95983a1d, 0x06b89fb4, 0xce6ea048,
+	0x6f3f3b82, 0x3520ab82, 0x011a1d4b, 0x277227f8,
+	0x611560b1, 0xe7933fdc, 0xbb3a792b, 0x344525bd,
+	0xa08839e1, 0x51ce794b, 0x2f32c9b7, 0xa01fbac9,
+	0xe01cc87e, 0xbcc7d1f6, 0xcf0111c3, 0xa1e8aac7,
+	0x1a908749, 0xd44fbd9a, 0xd0dadecb, 0xd50ada38,
+	0x0339c32a, 0xc6913667, 0x8df9317c, 0xe0b12b4f,
+	0xf79e59b7, 0x43f5bb3a, 0xf2d519ff, 0x27d9459c,
+	0xbf97222c, 0x15e6fc2a, 0x0f91fc71, 0x9b941525,
+	0xfae59361, 0xceb69ceb, 0xc2a86459, 0x12baa8d1,
+	0xb6c1075e, 0xe3056a0c, 0x10d25065, 0xcb03a442,
+	0xe0ec6e0e, 0x1698db3b, 0x4c98a0be, 0x3278e964,
+	0x9f1f9532, 0xe0d392df, 0xd3a0342b, 0x8971f21e,
+	0x1b0a7441, 0x4ba3348c, 0xc5be7120, 0xc37632d8,
+	0xdf359f8d, 0x9b992f2e, 0xe60b6f47, 0x0fe3f11d,
+	0xe54cda54, 0x1edad891, 0xce6279cf, 0xcd3e7e6f,
+	0x1618b166, 0xfd2c1d05, 0x848fd2c5, 0xf6fb2299,
+	0xf523f357, 0xa6327623, 0x93a83531, 0x56cccd02,
+	0xacf08162, 0x5a75ebb5, 0x6e163697, 0x88d273cc,
+	0xde966292, 0x81b949d0, 0x4c50901b, 0x71c65614,
+	0xe6c6c7bd, 0x327a140a, 0x45e1d006, 0xc3f27b9a,
+	0xc9aa53fd, 0x62a80f00, 0xbb25bfe2, 0x35bdd2f6,
+	0x71126905, 0xb2040222, 0xb6cbcf7c, 0xcd769c2b,
+	0x53113ec0, 0x1640e3d3, 0x38abbd60, 0x2547adf0,
+	0xba38209c, 0xf746ce76, 0x77afa1c5, 0x20756060,
+	0x85cbfe4e, 0x8ae88dd8, 0x7aaaf9b0, 0x4cf9aa7e,
+	0x1948c25c, 0x02fb8a8c, 0x01c36ae4, 0xd6ebe1f9,
+	0x90d4f869, 0xa65cdea0, 0x3f09252d, 0xc208e69f,
+	0xb74e6132, 0xce77e25b, 0x578fdfe3, 0x3ac372e6,
+};
+
+/*
+ * Round loop unrolling macros, S is a pointer to a S-Box array
+ * organized in 4 unsigned longs at a row.
+ */
+#define GET32_3(x) (((x) & 0xff))
+#define GET32_2(x) (((x) >> (8)) & (0xff))
+#define GET32_1(x) (((x) >> (16)) & (0xff))
+#define GET32_0(x) (((x) >> (24)) & (0xff))
+
+#define bf_F(x) (((S[GET32_0(x)] + S[256 + GET32_1(x)]) ^ \
+    S[512 + GET32_2(x)]) + S[768 + GET32_3(x)])
+
+#define EROUND(a, b, n)  do { b ^= P[n]; a ^= bf_F(b); } while (0)
+#define DROUND(a, b, n)  do { a ^= bf_F(b); b ^= P[n]; } while (0)
+
+
+/*
+ * encrypt isdn data frame
+ * every block with 9 samples is encrypted
+ */
+void
+dsp_bf_encrypt(struct dsp *dsp, u8 *data, int len)
+{
+	int i = 0, j = dsp->bf_crypt_pos;
+	u8 *bf_data_in = dsp->bf_data_in;
+	u8 *bf_crypt_out = dsp->bf_crypt_out;
+	u32 *P = dsp->bf_p;
+	u32 *S = dsp->bf_s;
+	u32 yl, yr;
+	u32 cs;
+	u8 nibble;
+
+	while (i < len) {
+		/* collect a block of 9 samples */
+		if (j < 9) {
+			bf_data_in[j] = *data;
+			*data++ = bf_crypt_out[j++];
+			i++;
+			continue;
+		}
+		j = 0;
+		/* transcode 9 samples xlaw to 8 bytes */
+		yl = dsp_audio_law2seven[bf_data_in[0]];
+		yl = (yl<<7) | dsp_audio_law2seven[bf_data_in[1]];
+		yl = (yl<<7) | dsp_audio_law2seven[bf_data_in[2]];
+		yl = (yl<<7) | dsp_audio_law2seven[bf_data_in[3]];
+		nibble = dsp_audio_law2seven[bf_data_in[4]];
+		yr = nibble;
+		yl = (yl<<4) | (nibble>>3);
+		yr = (yr<<7) | dsp_audio_law2seven[bf_data_in[5]];
+		yr = (yr<<7) | dsp_audio_law2seven[bf_data_in[6]];
+		yr = (yr<<7) | dsp_audio_law2seven[bf_data_in[7]];
+		yr = (yr<<7) | dsp_audio_law2seven[bf_data_in[8]];
+		yr = (yr<<1) | (bf_data_in[0] & 1);
+
+		/* fill unused bit with random noise of audio input */
+		/* encrypt */
+
+		EROUND(yr, yl, 0);
+		EROUND(yl, yr, 1);
+		EROUND(yr, yl, 2);
+		EROUND(yl, yr, 3);
+		EROUND(yr, yl, 4);
+		EROUND(yl, yr, 5);
+		EROUND(yr, yl, 6);
+		EROUND(yl, yr, 7);
+		EROUND(yr, yl, 8);
+		EROUND(yl, yr, 9);
+		EROUND(yr, yl, 10);
+		EROUND(yl, yr, 11);
+		EROUND(yr, yl, 12);
+		EROUND(yl, yr, 13);
+		EROUND(yr, yl, 14);
+		EROUND(yl, yr, 15);
+		yl ^= P[16];
+		yr ^= P[17];
+
+		/* calculate 3-bit checksumme */
+		cs = yl ^ (yl>>3) ^ (yl>>6) ^ (yl>>9) ^ (yl>>12) ^ (yl>>15)
+			^ (yl>>18) ^ (yl>>21) ^ (yl>>24) ^ (yl>>27) ^ (yl>>30)
+			^ (yr<<2) ^ (yr>>1) ^ (yr>>4) ^ (yr>>7) ^ (yr>>10)
+			^ (yr>>13) ^ (yr>>16) ^ (yr>>19) ^ (yr>>22) ^ (yr>>25)
+			^ (yr>>28) ^ (yr>>31);
+
+		/*
+		 * transcode 8 crypted bytes to 9 data bytes with sync
+		 * and checksum information
+		 */
+		bf_crypt_out[0] = (yl>>25) | 0x80;
+		bf_crypt_out[1] = (yl>>18) & 0x7f;
+		bf_crypt_out[2] = (yl>>11) & 0x7f;
+		bf_crypt_out[3] = (yl>>4) & 0x7f;
+		bf_crypt_out[4] = ((yl<<3) & 0x78) | ((yr>>29) & 0x07);
+		bf_crypt_out[5] = ((yr>>22) & 0x7f) | ((cs<<5) & 0x80);
+		bf_crypt_out[6] = ((yr>>15) & 0x7f) | ((cs<<6) & 0x80);
+		bf_crypt_out[7] = ((yr>>8) & 0x7f) | (cs<<7);
+		bf_crypt_out[8] = yr;
+	}
+
+	/* write current count */
+	dsp->bf_crypt_pos = j;
+
+}
+
+
+/*
+ * decrypt isdn data frame
+ * every block with 9 bytes is decrypted
+ */
+void
+dsp_bf_decrypt(struct dsp *dsp, u8 *data, int len)
+{
+	int i = 0;
+	u8 j = dsp->bf_decrypt_in_pos;
+	u8 k = dsp->bf_decrypt_out_pos;
+	u8 *bf_crypt_inring = dsp->bf_crypt_inring;
+	u8 *bf_data_out = dsp->bf_data_out;
+	u16 sync = dsp->bf_sync;
+	u32 *P = dsp->bf_p;
+	u32 *S = dsp->bf_s;
+	u32 yl, yr;
+	u8 nibble;
+	u8 cs, cs0, cs1, cs2;
+
+	while (i < len) {
+		/*
+		 * shift upper bit and rotate data to buffer ring
+		 * send current decrypted data
+		 */
+		sync = (sync<<1) | ((*data)>>7);
+		bf_crypt_inring[j++ & 15] = *data;
+		*data++ = bf_data_out[k++];
+		i++;
+		if (k == 9)
+			k = 0; /* repeat if no sync has been found */
+		/* check if not in sync */
+		if ((sync&0x1f0) != 0x100)
+			continue;
+		j -= 9;
+		/* transcode receive data to 64 bit block of encrypted data */
+		yl = bf_crypt_inring[j++ & 15];
+		yl = (yl<<7) | bf_crypt_inring[j++ & 15]; /* bit7 = 0 */
+		yl = (yl<<7) | bf_crypt_inring[j++ & 15]; /* bit7 = 0 */
+		yl = (yl<<7) | bf_crypt_inring[j++ & 15]; /* bit7 = 0 */
+		nibble = bf_crypt_inring[j++ & 15]; /* bit7 = 0 */
+		yr = nibble;
+		yl = (yl<<4) | (nibble>>3);
+		cs2 = bf_crypt_inring[j++ & 15];
+		yr = (yr<<7) | (cs2 & 0x7f);
+		cs1 = bf_crypt_inring[j++ & 15];
+		yr = (yr<<7) | (cs1 & 0x7f);
+		cs0 = bf_crypt_inring[j++ & 15];
+		yr = (yr<<7) | (cs0 & 0x7f);
+		yr = (yr<<8) | bf_crypt_inring[j++ & 15];
+
+		/* calculate 3-bit checksumme */
+		cs = yl ^ (yl>>3) ^ (yl>>6) ^ (yl>>9) ^ (yl>>12) ^ (yl>>15)
+			^ (yl>>18) ^ (yl>>21) ^ (yl>>24) ^ (yl>>27) ^ (yl>>30)
+			^ (yr<<2) ^ (yr>>1) ^ (yr>>4) ^ (yr>>7) ^ (yr>>10)
+			^ (yr>>13) ^ (yr>>16) ^ (yr>>19) ^ (yr>>22) ^ (yr>>25)
+			^ (yr>>28) ^ (yr>>31);
+
+		/* check if frame is valid */
+		if ((cs&0x7) != (((cs2>>5)&4) | ((cs1>>6)&2) | (cs0 >> 7))) {
+			if (dsp_debug & DEBUG_DSP_BLOWFISH)
+				printk(KERN_DEBUG
+				    "DSP BLOWFISH: received corrupt frame, "
+				    "checksumme is not correct\n");
+			continue;
+		}
+
+		/* decrypt */
+		yr ^= P[17];
+		yl ^= P[16];
+		DROUND(yl, yr, 15);
+		DROUND(yr, yl, 14);
+		DROUND(yl, yr, 13);
+		DROUND(yr, yl, 12);
+		DROUND(yl, yr, 11);
+		DROUND(yr, yl, 10);
+		DROUND(yl, yr, 9);
+		DROUND(yr, yl, 8);
+		DROUND(yl, yr, 7);
+		DROUND(yr, yl, 6);
+		DROUND(yl, yr, 5);
+		DROUND(yr, yl, 4);
+		DROUND(yl, yr, 3);
+		DROUND(yr, yl, 2);
+		DROUND(yl, yr, 1);
+		DROUND(yr, yl, 0);
+
+		/* transcode 8 crypted bytes to 9 sample bytes */
+		bf_data_out[0] = dsp_audio_seven2law[(yl>>25) & 0x7f];
+		bf_data_out[1] = dsp_audio_seven2law[(yl>>18) & 0x7f];
+		bf_data_out[2] = dsp_audio_seven2law[(yl>>11) & 0x7f];
+		bf_data_out[3] = dsp_audio_seven2law[(yl>>4) & 0x7f];
+		bf_data_out[4] = dsp_audio_seven2law[((yl<<3) & 0x78) |
+		    ((yr>>29) & 0x07)];
+
+		bf_data_out[5] = dsp_audio_seven2law[(yr>>22) & 0x7f];
+		bf_data_out[6] = dsp_audio_seven2law[(yr>>15) & 0x7f];
+		bf_data_out[7] = dsp_audio_seven2law[(yr>>8) & 0x7f];
+		bf_data_out[8] = dsp_audio_seven2law[(yr>>1) & 0x7f];
+		k = 0; /* start with new decoded frame */
+	}
+
+	/* write current count and sync */
+	dsp->bf_decrypt_in_pos = j;
+	dsp->bf_decrypt_out_pos = k;
+	dsp->bf_sync = sync;
+}
+
+
+/* used to encrypt S and P boxes */
+static inline void
+encrypt_block(const u32 *P, const u32 *S, u32 *dst, u32 *src)
+{
+	u32 yl = src[0];
+	u32 yr = src[1];
+
+	EROUND(yr, yl, 0);
+	EROUND(yl, yr, 1);
+	EROUND(yr, yl, 2);
+	EROUND(yl, yr, 3);
+	EROUND(yr, yl, 4);
+	EROUND(yl, yr, 5);
+	EROUND(yr, yl, 6);
+	EROUND(yl, yr, 7);
+	EROUND(yr, yl, 8);
+	EROUND(yl, yr, 9);
+	EROUND(yr, yl, 10);
+	EROUND(yl, yr, 11);
+	EROUND(yr, yl, 12);
+	EROUND(yl, yr, 13);
+	EROUND(yr, yl, 14);
+	EROUND(yl, yr, 15);
+
+	yl ^= P[16];
+	yr ^= P[17];
+
+	dst[0] = yr;
+	dst[1] = yl;
+}
+
+/*
+ * initialize the dsp for encryption and decryption using the same key
+ * Calculates the blowfish S and P boxes for encryption and decryption.
+ * The margin of keylen must be 4-56 bytes.
+ * returns 0 if ok.
+ */
+int
+dsp_bf_init(struct dsp *dsp, const u8 *key, uint keylen)
+{
+	short i, j, count;
+	u32 data[2], temp;
+	u32 *P = (u32 *)dsp->bf_p;
+	u32 *S = (u32 *)dsp->bf_s;
+
+	if (keylen < 4 || keylen > 56)
+		return 1;
+
+	/* Set dsp states */
+	i = 0;
+	while (i < 9) {
+		dsp->bf_crypt_out[i] = 0xff;
+		dsp->bf_data_out[i] = dsp_silence;
+		i++;
+	}
+	dsp->bf_crypt_pos = 0;
+	dsp->bf_decrypt_in_pos = 0;
+	dsp->bf_decrypt_out_pos = 0;
+	dsp->bf_sync = 0x1ff;
+	dsp->bf_enable = 1;
+
+	/* Copy the initialization s-boxes */
+	for (i = 0, count = 0; i < 256; i++)
+		for (j = 0; j < 4; j++, count++)
+			S[count] = bf_sbox[count];
+
+	/* Set the p-boxes */
+	for (i = 0; i < 16 + 2; i++)
+		P[i] = bf_pbox[i];
+
+	/* Actual subkey generation */
+	for (j = 0, i = 0; i < 16 + 2; i++) {
+		temp = (((u32)key[j] << 24) |
+		    ((u32)key[(j + 1) % keylen] << 16) |
+		    ((u32)key[(j + 2) % keylen] << 8) |
+		    ((u32)key[(j + 3) % keylen]));
+
+		P[i] = P[i] ^ temp;
+		j = (j + 4) % keylen;
+	}
+
+	data[0] = 0x00000000;
+	data[1] = 0x00000000;
+
+	for (i = 0; i < 16 + 2; i += 2) {
+		encrypt_block(P, S, data, data);
+
+		P[i] = data[0];
+		P[i + 1] = data[1];
+	}
+
+	for (i = 0; i < 4; i++) {
+		for (j = 0, count = i * 256; j < 256; j += 2, count += 2) {
+			encrypt_block(P, S, data, data);
+
+			S[count] = data[0];
+			S[count + 1] = data[1];
+		}
+	}
+
+	return 0;
+}
+
+
+/*
+ * turn encryption off
+ */
+void
+dsp_bf_cleanup(struct dsp *dsp)
+{
+	dsp->bf_enable = 0;
+}
diff --git a/drivers/isdn/mISDN/dsp_cmx.c b/drivers/isdn/mISDN/dsp_cmx.c
new file mode 100644
index 000000000000..e92b1ba4b45e
--- /dev/null
+++ b/drivers/isdn/mISDN/dsp_cmx.c
@@ -0,0 +1,1886 @@
+/*
+ * Audio crossconnecting/conferrencing (hardware level).
+ *
+ * Copyright 2002 by Andreas Eversberg (jolly@eversberg.eu)
+ *
+ * This software may be used and distributed according to the terms
+ * of the GNU General Public License, incorporated herein by reference.
+ *
+ */
+
+/*
+ * The process of adding and removing parties to/from a conference:
+ *
+ * There is a chain of struct dsp_conf which has one or more members in a chain
+ * of struct dsp_conf_member.
+ *
+ * After a party is added, the conference is checked for hardware capability.
+ * Also if a party is removed, the conference is checked again.
+ *
+ * There are 3 different solutions: -1 = software, 0 = hardware-crossconnect
+ * 1-n = hardware-conference. The n will give the conference number.
+ *
+ * Depending on the change after removal or insertion of a party, hardware
+ * commands are given.
+ *
+ * The current solution is stored within the struct dsp_conf entry.
+ */
+
+/*
+ * HOW THE CMX WORKS:
+ *
+ * There are 3 types of interaction: One member is alone, in this case only
+ * data flow from upper to lower layer is done.
+ * Two members will also exchange their data so they are crossconnected.
+ * Three or more members will be added in a conference and will hear each
+ * other but will not receive their own speech (echo) if not enabled.
+ *
+ * Features of CMX are:
+ *  - Crossconnecting or even conference, if more than two members are together.
+ *  - Force mixing of transmit data with other crossconnect/conference members.
+ *  - Echo generation to benchmark the delay of audio processing.
+ *  - Use hardware to minimize cpu load, disable FIFO load and minimize delay.
+ *  - Dejittering and clock generation.
+ *
+ * There are 2 buffers:
+ *
+ *
+ * RX-Buffer
+ *                 R             W
+ *                 |             |
+ * ----------------+-------------+-------------------
+ *
+ * The rx-buffer is a ring buffer used to store the received data for each
+ * individual member. This is only the case if data needs to be dejittered
+ * or in case of a conference where different clocks require reclocking.
+ * The transmit-clock (R) will read the buffer.
+ * If the clock overruns the write-pointer, we will have a buffer underrun.
+ * If the write pointer always has a certain distance from the transmit-
+ * clock, we will have a delay. The delay will dynamically be increased and
+ * reduced.
+ *
+ *
+ * TX-Buffer
+ *                  R        W
+ *                  |        |
+ * -----------------+--------+-----------------------
+ *
+ * The tx-buffer is a ring buffer to queue the transmit data from user space
+ * until it will be mixed or sent. There are two pointers, R and W. If the write
+ * pointer W would reach or overrun R, the buffer would overrun. In this case
+ * (some) data is dropped so that it will not overrun.
+ * Additionally a dynamic dejittering can be enabled. this allows data from
+ * user space that have jitter and different clock source.
+ *
+ *
+ * Clock:
+ *
+ * A Clock is not required, if the data source has exactly one clock. In this
+ * case the data source is forwarded to the destination.
+ *
+ * A Clock is required, because the data source
+ *  - has multiple clocks.
+ *  - has no usable clock due to jitter or packet loss (VoIP).
+ * In this case the system's clock is used. The clock resolution depends on
+ * the jiffie resolution.
+ *
+ * If a member joins a conference:
+ *
+ * - If a member joins, its rx_buff is set to silence and change read pointer
+ *   to transmit clock.
+ *
+ * The procedure of received data from card is explained in cmx_receive.
+ * The procedure of received data from user space is explained in cmx_transmit.
+ * The procedure of transmit data to card is cmx_send.
+ *
+ *
+ * Interaction with other features:
+ *
+ * DTMF:
+ * DTMF decoding is done before the data is crossconnected.
+ *
+ * Volume change:
+ * Changing rx-volume is done before the data is crossconnected. The tx-volume
+ * must be changed whenever data is transmitted to the card by the cmx.
+ *
+ * Tones:
+ * If a tone is enabled, it will be processed whenever data is transmitted to
+ * the card. It will replace the tx-data from the user space.
+ * If tones are generated by hardware, this conference member is removed for
+ * this time.
+ *
+ * Disable rx-data:
+ * If cmx is realized in hardware, rx data will be disabled if requested by
+ * the upper layer. If dtmf decoding is done by software and enabled, rx data
+ * will not be diabled but blocked to the upper layer.
+ *
+ * HFC conference engine:
+ * If it is possible to realize all features using hardware, hardware will be
+ * used if not forbidden by control command. Disabling rx-data provides
+ * absolutely traffic free audio processing. (except for the quick 1-frame
+ * upload of a tone loop, only once for a new tone)
+ *
+ */
+
+/* delay.h is required for hw_lock.h */
+
+#include <linux/delay.h>
+#include <linux/mISDNif.h>
+#include <linux/mISDNdsp.h>
+#include "core.h"
+#include "dsp.h"
+/*
+ * debugging of multi party conference,
+ * by using conference even with two members
+ */
+
+/* #define CMX_CONF_DEBUG */
+
+/*#define CMX_DEBUG * massive read/write pointer output */
+/*#define CMX_TX_DEBUG * massive read/write on tx-buffer with content */
+
+static inline int
+count_list_member(struct list_head *head)
+{
+	int			cnt = 0;
+	struct list_head	*m;
+
+	list_for_each(m, head)
+		cnt++;
+	return cnt;
+}
+
+/*
+ * debug cmx memory structure
+ */
+void
+dsp_cmx_debug(struct dsp *dsp)
+{
+	struct dsp_conf	*conf;
+	struct dsp_conf_member	*member;
+	struct dsp		*odsp;
+
+	printk(KERN_DEBUG "-----Current DSP\n");
+	list_for_each_entry(odsp, &dsp_ilist, list) {
+		printk(KERN_DEBUG "* %s echo=%d txmix=%d",
+		    odsp->name, odsp->echo, odsp->tx_mix);
+		if (odsp->conf)
+			printk(" (Conf %d)", odsp->conf->id);
+		if (dsp == odsp)
+			printk(" *this*");
+		printk("\n");
+	}
+	printk(KERN_DEBUG "-----Current Conf:\n");
+	list_for_each_entry(conf, &conf_ilist, list) {
+		printk(KERN_DEBUG "* Conf %d (%p)\n", conf->id, conf);
+		list_for_each_entry(member, &conf->mlist, list) {
+			printk(KERN_DEBUG
+			    "  - member = %s (slot_tx %d, bank_tx %d, "
+			    "slot_rx %d, bank_rx %d hfc_conf %d)%s\n",
+			    member->dsp->name, member->dsp->pcm_slot_tx,
+			    member->dsp->pcm_bank_tx, member->dsp->pcm_slot_rx,
+			    member->dsp->pcm_bank_rx, member->dsp->hfc_conf,
+			    (member->dsp == dsp) ? " *this*" : "");
+		}
+	}
+	printk(KERN_DEBUG "-----end\n");
+}
+
+/*
+ * search conference
+ */
+static struct dsp_conf *
+dsp_cmx_search_conf(u32 id)
+{
+	struct dsp_conf *conf;
+
+	if (!id) {
+		printk(KERN_WARNING "%s: conference ID is 0.\n", __func__);
+		return NULL;
+	}
+
+	/* search conference */
+	list_for_each_entry(conf, &conf_ilist, list)
+		if (conf->id == id)
+			return conf;
+
+	return NULL;
+}
+
+
+/*
+ * add member to conference
+ */
+static int
+dsp_cmx_add_conf_member(struct dsp *dsp, struct dsp_conf *conf)
+{
+	struct dsp_conf_member *member;
+
+	if (!conf || !dsp) {
+		printk(KERN_WARNING "%s: conf or dsp is 0.\n", __func__);
+		return -EINVAL;
+	}
+	if (dsp->member) {
+		printk(KERN_WARNING "%s: dsp is already member in a conf.\n",
+			__func__);
+		return -EINVAL;
+	}
+
+	if (dsp->conf) {
+		printk(KERN_WARNING "%s: dsp is already in a conf.\n",
+			__func__);
+		return -EINVAL;
+	}
+
+	member = kzalloc(sizeof(struct dsp_conf_member), GFP_ATOMIC);
+	if (!member) {
+		printk(KERN_ERR "kmalloc struct dsp_conf_member failed\n");
+		return -ENOMEM;
+	}
+	member->dsp = dsp;
+	/* clear rx buffer */
+	memset(dsp->rx_buff, dsp_silence, sizeof(dsp->rx_buff));
+	dsp->rx_init = 1; /* rx_W and rx_R will be adjusted on first frame */
+	dsp->rx_W = 0;
+	dsp->rx_R = 0;
+
+	list_add_tail(&member->list, &conf->mlist);
+
+	dsp->conf = conf;
+	dsp->member = member;
+
+	return 0;
+}
+
+
+/*
+ * del member from conference
+ */
+int
+dsp_cmx_del_conf_member(struct dsp *dsp)
+{
+	struct dsp_conf_member *member;
+
+	if (!dsp) {
+		printk(KERN_WARNING "%s: dsp is 0.\n",
+			__func__);
+		return -EINVAL;
+	}
+
+	if (!dsp->conf) {
+		printk(KERN_WARNING "%s: dsp is not in a conf.\n",
+			__func__);
+		return -EINVAL;
+	}
+
+	if (list_empty(&dsp->conf->mlist)) {
+		printk(KERN_WARNING "%s: dsp has linked an empty conf.\n",
+			__func__);
+		return -EINVAL;
+	}
+
+	/* find us in conf */
+	list_for_each_entry(member, &dsp->conf->mlist, list) {
+		if (member->dsp == dsp) {
+			list_del(&member->list);
+			dsp->conf = NULL;
+			dsp->member = NULL;
+			kfree(member);
+			return 0;
+		}
+	}
+	printk(KERN_WARNING
+	    "%s: dsp is not present in its own conf_meber list.\n",
+	    __func__);
+
+	return -EINVAL;
+}
+
+
+/*
+ * new conference
+ */
+static struct dsp_conf
+*dsp_cmx_new_conf(u32 id)
+{
+	struct dsp_conf *conf;
+
+	if (!id) {
+		printk(KERN_WARNING "%s: id is 0.\n",
+		    __func__);
+		return NULL;
+	}
+
+	conf = kzalloc(sizeof(struct dsp_conf), GFP_ATOMIC);
+	if (!conf) {
+		printk(KERN_ERR "kmalloc struct dsp_conf failed\n");
+		return NULL;
+	}
+	INIT_LIST_HEAD(&conf->mlist);
+	conf->id = id;
+
+	list_add_tail(&conf->list, &conf_ilist);
+
+	return conf;
+}
+
+
+/*
+ * del conference
+ */
+int
+dsp_cmx_del_conf(struct dsp_conf *conf)
+{
+	if (!conf) {
+		printk(KERN_WARNING "%s: conf is null.\n",
+		    __func__);
+		return -EINVAL;
+	}
+
+	if (!list_empty(&conf->mlist)) {
+		printk(KERN_WARNING "%s: conf not empty.\n",
+		    __func__);
+		return -EINVAL;
+	}
+	list_del(&conf->list);
+	kfree(conf);
+
+	return 0;
+}
+
+
+/*
+ * send HW message to hfc card
+ */
+static void
+dsp_cmx_hw_message(struct dsp *dsp, u32 message, u32 param1, u32 param2,
+    u32 param3, u32 param4)
+{
+	struct mISDN_ctrl_req cq;
+
+	memset(&cq, 0, sizeof(cq));
+	cq.op = message;
+	cq.p1 = param1 | (param2 << 8);
+	cq.p2 = param3 | (param4 << 8);
+	if (dsp->ch.peer)
+		dsp->ch.peer->ctrl(dsp->ch.peer, CONTROL_CHANNEL, &cq);
+}
+
+
+/*
+ * do hardware update and set the software/hardware flag
+ *
+ * either a conference or a dsp instance can be given
+ * if only dsp instance is given, the instance is not associated with a conf
+ * and therefore removed. if a conference is given, the dsp is expected to
+ * be member of that conference.
+ */
+void
+dsp_cmx_hardware(struct dsp_conf *conf, struct dsp *dsp)
+{
+	struct dsp_conf_member	*member, *nextm;
+	struct dsp		*finddsp;
+	int		memb = 0, i, ii, i1, i2;
+	int		freeunits[8];
+	u_char		freeslots[256];
+	int		same_hfc = -1, same_pcm = -1, current_conf = -1,
+	    all_conf = 1;
+
+	/* dsp gets updated (no conf) */
+	if (!conf) {
+		if (!dsp)
+			return;
+		if (dsp_debug & DEBUG_DSP_CMX)
+			printk(KERN_DEBUG "%s checking dsp %s\n",
+			    __func__, dsp->name);
+one_member:
+		/* remove HFC conference if enabled */
+		if (dsp->hfc_conf >= 0) {
+			if (dsp_debug & DEBUG_DSP_CMX)
+				printk(KERN_DEBUG
+				    "%s removing %s from HFC conf %d "
+				    "because dsp is split\n", __func__,
+				    dsp->name, dsp->hfc_conf);
+			dsp_cmx_hw_message(dsp, MISDN_CTRL_HFC_CONF_SPLIT,
+			    0, 0, 0, 0);
+			dsp->hfc_conf = -1;
+		}
+		/* process hw echo */
+		if (dsp->features.pcm_banks < 1)
+			return;
+		if (!dsp->echo) {
+			/* NO ECHO: remove PCM slot if assigned */
+			if (dsp->pcm_slot_tx >= 0 || dsp->pcm_slot_rx >= 0) {
+				if (dsp_debug & DEBUG_DSP_CMX)
+					printk(KERN_DEBUG "%s removing %s from"
+					    " PCM slot %d (TX) %d (RX) because"
+					    " dsp is split (no echo)\n",
+					    __func__, dsp->name,
+					    dsp->pcm_slot_tx, dsp->pcm_slot_rx);
+				dsp_cmx_hw_message(dsp, MISDN_CTRL_HFC_PCM_DISC,
+				    0, 0, 0, 0);
+				dsp->pcm_slot_tx = -1;
+				dsp->pcm_bank_tx = -1;
+				dsp->pcm_slot_rx = -1;
+				dsp->pcm_bank_rx = -1;
+			}
+			return;
+		}
+		/* ECHO: already echo */
+		if (dsp->pcm_slot_tx >= 0 && dsp->pcm_slot_rx < 0 &&
+		    dsp->pcm_bank_tx == 2 && dsp->pcm_bank_rx == 2)
+			return;
+		/* ECHO: if slot already assigned */
+		if (dsp->pcm_slot_tx >= 0) {
+			dsp->pcm_slot_rx = dsp->pcm_slot_tx;
+			dsp->pcm_bank_tx = 2; /* 2 means loop */
+			dsp->pcm_bank_rx = 2;
+			if (dsp_debug & DEBUG_DSP_CMX)
+				printk(KERN_DEBUG
+				    "%s refresh %s for echo using slot %d\n",
+				    __func__, dsp->name,
+				    dsp->pcm_slot_tx);
+			dsp_cmx_hw_message(dsp, MISDN_CTRL_HFC_PCM_CONN,
+			    dsp->pcm_slot_tx, 2, dsp->pcm_slot_rx, 2);
+			return;
+		}
+		/* ECHO: find slot */
+		dsp->pcm_slot_tx = -1;
+		dsp->pcm_slot_rx = -1;
+		memset(freeslots, 1, sizeof(freeslots));
+		list_for_each_entry(finddsp, &dsp_ilist, list) {
+			if (finddsp->features.pcm_id == dsp->features.pcm_id) {
+				if (finddsp->pcm_slot_rx >= 0 &&
+				    finddsp->pcm_slot_rx < sizeof(freeslots))
+					freeslots[finddsp->pcm_slot_tx] = 0;
+				if (finddsp->pcm_slot_tx >= 0 &&
+				    finddsp->pcm_slot_tx < sizeof(freeslots))
+					freeslots[finddsp->pcm_slot_rx] = 0;
+			}
+		}
+		i = 0;
+		ii = dsp->features.pcm_slots;
+		while (i < ii) {
+			if (freeslots[i])
+				break;
+			i++;
+		}
+		if (i == ii) {
+			if (dsp_debug & DEBUG_DSP_CMX)
+				printk(KERN_DEBUG
+				    "%s no slot available for echo\n",
+				    __func__);
+			/* no more slots available */
+			return;
+		}
+		/* assign free slot */
+		dsp->pcm_slot_tx = i;
+		dsp->pcm_slot_rx = i;
+		dsp->pcm_bank_tx = 2; /* loop */
+		dsp->pcm_bank_rx = 2;
+		if (dsp_debug & DEBUG_DSP_CMX)
+			printk(KERN_DEBUG
+			    "%s assign echo for %s using slot %d\n",
+			    __func__, dsp->name, dsp->pcm_slot_tx);
+		dsp_cmx_hw_message(dsp, MISDN_CTRL_HFC_PCM_CONN,
+		    dsp->pcm_slot_tx, 2, dsp->pcm_slot_rx, 2);
+		return;
+	}
+
+	/* conf gets updated (all members) */
+	if (dsp_debug & DEBUG_DSP_CMX)
+		printk(KERN_DEBUG "%s checking conference %d\n",
+		    __func__, conf->id);
+
+	if (list_empty(&conf->mlist)) {
+		printk(KERN_ERR "%s: conference whithout members\n",
+		    __func__);
+		return;
+	}
+	member = list_entry(conf->mlist.next, struct dsp_conf_member, list);
+	same_hfc = member->dsp->features.hfc_id;
+	same_pcm = member->dsp->features.pcm_id;
+	/* check all members in our conference */
+	list_for_each_entry(member, &conf->mlist, list) {
+		/* check if member uses mixing */
+		if (member->dsp->tx_mix) {
+			if (dsp_debug & DEBUG_DSP_CMX)
+				printk(KERN_DEBUG
+				    "%s dsp %s cannot form a conf, because "
+				    "tx_mix is turned on\n", __func__,
+				    member->dsp->name);
+conf_software:
+			list_for_each_entry(member, &conf->mlist, list) {
+				dsp = member->dsp;
+				/* remove HFC conference if enabled */
+				if (dsp->hfc_conf >= 0) {
+					if (dsp_debug & DEBUG_DSP_CMX)
+						printk(KERN_DEBUG
+						    "%s removing %s from HFC "
+						    "conf %d because not "
+						    "possible with hardware\n",
+						    __func__,
+						    dsp->name,
+						    dsp->hfc_conf);
+					dsp_cmx_hw_message(dsp,
+					    MISDN_CTRL_HFC_CONF_SPLIT,
+					    0, 0, 0, 0);
+					dsp->hfc_conf = -1;
+				}
+				/* remove PCM slot if assigned */
+				if (dsp->pcm_slot_tx >= 0 ||
+				    dsp->pcm_slot_rx >= 0) {
+					if (dsp_debug & DEBUG_DSP_CMX)
+						printk(KERN_DEBUG "%s removing "
+						    "%s from PCM slot %d (TX)"
+						    " slot %d (RX) because not"
+						    " possible with hardware\n",
+						    __func__,
+						    dsp->name,
+						    dsp->pcm_slot_tx,
+						    dsp->pcm_slot_rx);
+					dsp_cmx_hw_message(dsp,
+					    MISDN_CTRL_HFC_PCM_DISC,
+					    0, 0, 0, 0);
+					dsp->pcm_slot_tx = -1;
+					dsp->pcm_bank_tx = -1;
+					dsp->pcm_slot_rx = -1;
+					dsp->pcm_bank_rx = -1;
+				}
+			}
+			conf->hardware = 0;
+			conf->software = 1;
+			return;
+		}
+		/* check if member has echo turned on */
+		if (member->dsp->echo) {
+			if (dsp_debug & DEBUG_DSP_CMX)
+				printk(KERN_DEBUG
+				    "%s dsp %s cannot form a conf, because "
+				    "echo is turned on\n", __func__,
+				    member->dsp->name);
+			goto conf_software;
+		}
+		/* check if member has tx_mix turned on */
+		if (member->dsp->tx_mix) {
+			if (dsp_debug & DEBUG_DSP_CMX)
+				printk(KERN_DEBUG
+				    "%s dsp %s cannot form a conf, because "
+				    "tx_mix is turned on\n",
+				    __func__, member->dsp->name);
+			goto conf_software;
+		}
+		/* check if member changes volume at an not suppoted level */
+		if (member->dsp->tx_volume) {
+			if (dsp_debug & DEBUG_DSP_CMX)
+				printk(KERN_DEBUG
+				    "%s dsp %s cannot form a conf, because "
+				    "tx_volume is changed\n",
+				    __func__, member->dsp->name);
+			goto conf_software;
+		}
+		if (member->dsp->rx_volume) {
+			if (dsp_debug & DEBUG_DSP_CMX)
+				printk(KERN_DEBUG
+				    "%s dsp %s cannot form a conf, because "
+				    "rx_volume is changed\n",
+				    __func__, member->dsp->name);
+			goto conf_software;
+		}
+		/* check if tx-data turned on */
+		if (member->dsp->tx_data) {
+			if (dsp_debug & DEBUG_DSP_CMX)
+				printk(KERN_DEBUG
+				    "%s dsp %s cannot form a conf, because "
+				    "tx_data is turned on\n",
+				    __func__, member->dsp->name);
+			goto conf_software;
+		}
+		/* check if pipeline exists */
+		if (member->dsp->pipeline.inuse) {
+			if (dsp_debug & DEBUG_DSP_CMX)
+				printk(KERN_DEBUG
+				    "%s dsp %s cannot form a conf, because "
+				    "pipeline exists\n", __func__,
+				    member->dsp->name);
+			goto conf_software;
+		}
+		/* check if encryption is enabled */
+		if (member->dsp->bf_enable) {
+			if (dsp_debug & DEBUG_DSP_CMX)
+				printk(KERN_DEBUG "%s dsp %s cannot form a "
+				    "conf, because encryption is enabled\n",
+				    __func__, member->dsp->name);
+			goto conf_software;
+		}
+		/* check if member is on a card with PCM support */
+		if (member->dsp->features.pcm_id < 0) {
+			if (dsp_debug & DEBUG_DSP_CMX)
+				printk(KERN_DEBUG
+				    "%s dsp %s cannot form a conf, because "
+				    "dsp has no PCM bus\n",
+				    __func__, member->dsp->name);
+			goto conf_software;
+		}
+		/* check if relations are on the same PCM bus */
+		if (member->dsp->features.pcm_id != same_pcm) {
+			if (dsp_debug & DEBUG_DSP_CMX)
+				printk(KERN_DEBUG
+				    "%s dsp %s cannot form a conf, because "
+				    "dsp is on a different PCM bus than the "
+				    "first dsp\n",
+				    __func__, member->dsp->name);
+			goto conf_software;
+		}
+		/* determine if members are on the same hfc chip */
+		if (same_hfc != member->dsp->features.hfc_id)
+			same_hfc = -1;
+		/* if there are members already in a conference */
+		if (current_conf < 0 && member->dsp->hfc_conf >= 0)
+			current_conf = member->dsp->hfc_conf;
+		/* if any member is not in a conference */
+		if (member->dsp->hfc_conf < 0)
+			all_conf = 0;
+
+		memb++;
+	}
+
+	/* if no member, this is an error */
+	if (memb < 1)
+		return;
+
+	/* one member */
+	if (memb == 1) {
+		if (dsp_debug & DEBUG_DSP_CMX)
+			printk(KERN_DEBUG
+			    "%s conf %d cannot form a HW conference, "
+			    "because dsp is alone\n", __func__, conf->id);
+		conf->hardware = 0;
+		conf->software = 0;
+		member = list_entry(conf->mlist.next, struct dsp_conf_member,
+			list);
+		dsp = member->dsp;
+		goto one_member;
+	}
+
+	/*
+	 * ok, now we are sure that all members are on the same pcm.
+	 * now we will see if we have only two members, so we can do
+	 * crossconnections, which don't have any limitations.
+	 */
+
+	/* if we have only two members */
+	if (memb == 2) {
+		member = list_entry(conf->mlist.next, struct dsp_conf_member,
+			list);
+		nextm = list_entry(member->list.next, struct dsp_conf_member,
+			list);
+		/* remove HFC conference if enabled */
+		if (member->dsp->hfc_conf >= 0) {
+			if (dsp_debug & DEBUG_DSP_CMX)
+				printk(KERN_DEBUG
+				    "%s removing %s from HFC conf %d because "
+				    "two parties require only a PCM slot\n",
+				    __func__, member->dsp->name,
+				    member->dsp->hfc_conf);
+			dsp_cmx_hw_message(member->dsp,
+			    MISDN_CTRL_HFC_CONF_SPLIT, 0, 0, 0, 0);
+			member->dsp->hfc_conf = -1;
+		}
+		if (nextm->dsp->hfc_conf >= 0) {
+			if (dsp_debug & DEBUG_DSP_CMX)
+				printk(KERN_DEBUG
+				    "%s removing %s from HFC conf %d because "
+				    "two parties require only a PCM slot\n",
+				    __func__, nextm->dsp->name,
+				    nextm->dsp->hfc_conf);
+			dsp_cmx_hw_message(nextm->dsp,
+			    MISDN_CTRL_HFC_CONF_SPLIT, 0, 0, 0, 0);
+			nextm->dsp->hfc_conf = -1;
+		}
+		/* if members have two banks (and not on the same chip) */
+		if (member->dsp->features.pcm_banks > 1 &&
+		    nextm->dsp->features.pcm_banks > 1 &&
+		    member->dsp->features.hfc_id !=
+		    nextm->dsp->features.hfc_id) {
+			/* if both members have same slots with crossed banks */
+			if (member->dsp->pcm_slot_tx >= 0 &&
+			    member->dsp->pcm_slot_rx >= 0 &&
+			    nextm->dsp->pcm_slot_tx >= 0 &&
+			    nextm->dsp->pcm_slot_rx >= 0 &&
+			    nextm->dsp->pcm_slot_tx ==
+			    member->dsp->pcm_slot_rx &&
+			    nextm->dsp->pcm_slot_rx ==
+			    member->dsp->pcm_slot_tx &&
+			    nextm->dsp->pcm_slot_tx ==
+			    member->dsp->pcm_slot_tx &&
+			    member->dsp->pcm_bank_tx !=
+			    member->dsp->pcm_bank_rx &&
+			    nextm->dsp->pcm_bank_tx !=
+			    nextm->dsp->pcm_bank_rx) {
+				/* all members have same slot */
+				if (dsp_debug & DEBUG_DSP_CMX)
+					printk(KERN_DEBUG
+					    "%s dsp %s & %s stay joined on "
+					    "PCM slot %d bank %d (TX) bank %d "
+					    "(RX) (on different chips)\n",
+					    __func__,
+					    member->dsp->name,
+					    nextm->dsp->name,
+					    member->dsp->pcm_slot_tx,
+					    member->dsp->pcm_bank_tx,
+					    member->dsp->pcm_bank_rx);
+				conf->hardware = 0;
+				conf->software = 1;
+				return;
+			}
+			/* find a new slot */
+			memset(freeslots, 1, sizeof(freeslots));
+			list_for_each_entry(dsp, &dsp_ilist, list) {
+				if (dsp != member->dsp &&
+				    dsp != nextm->dsp &&
+				    member->dsp->features.pcm_id ==
+				    dsp->features.pcm_id) {
+					if (dsp->pcm_slot_rx >= 0 &&
+					    dsp->pcm_slot_rx <
+					    sizeof(freeslots))
+						freeslots[dsp->pcm_slot_tx] = 0;
+					if (dsp->pcm_slot_tx >= 0 &&
+					    dsp->pcm_slot_tx <
+					    sizeof(freeslots))
+						freeslots[dsp->pcm_slot_rx] = 0;
+				}
+			}
+			i = 0;
+			ii = member->dsp->features.pcm_slots;
+			while (i < ii) {
+				if (freeslots[i])
+					break;
+				i++;
+			}
+			if (i == ii) {
+				if (dsp_debug & DEBUG_DSP_CMX)
+					printk(KERN_DEBUG
+					    "%s no slot available for "
+					    "%s & %s\n", __func__,
+					    member->dsp->name,
+					    nextm->dsp->name);
+				/* no more slots available */
+				goto conf_software;
+			}
+			/* assign free slot */
+			member->dsp->pcm_slot_tx = i;
+			member->dsp->pcm_slot_rx = i;
+			nextm->dsp->pcm_slot_tx = i;
+			nextm->dsp->pcm_slot_rx = i;
+			member->dsp->pcm_bank_rx = 0;
+			member->dsp->pcm_bank_tx = 1;
+			nextm->dsp->pcm_bank_rx = 1;
+			nextm->dsp->pcm_bank_tx = 0;
+			if (dsp_debug & DEBUG_DSP_CMX)
+				printk(KERN_DEBUG
+				    "%s adding %s & %s to new PCM slot %d "
+				    "(TX and RX on different chips) because "
+				    "both members have not same slots\n",
+				    __func__,
+				    member->dsp->name,
+				    nextm->dsp->name,
+				    member->dsp->pcm_slot_tx);
+			dsp_cmx_hw_message(member->dsp, MISDN_CTRL_HFC_PCM_CONN,
+			    member->dsp->pcm_slot_tx, member->dsp->pcm_bank_tx,
+			    member->dsp->pcm_slot_rx, member->dsp->pcm_bank_rx);
+			dsp_cmx_hw_message(nextm->dsp, MISDN_CTRL_HFC_PCM_CONN,
+			    nextm->dsp->pcm_slot_tx, nextm->dsp->pcm_bank_tx,
+			    nextm->dsp->pcm_slot_rx, nextm->dsp->pcm_bank_rx);
+			conf->hardware = 1;
+			conf->software = 0;
+			return;
+		/* if members have one bank (or on the same chip) */
+		} else {
+			/* if both members have different crossed slots */
+			if (member->dsp->pcm_slot_tx >= 0 &&
+			    member->dsp->pcm_slot_rx >= 0 &&
+			    nextm->dsp->pcm_slot_tx >= 0 &&
+			    nextm->dsp->pcm_slot_rx >= 0 &&
+			    nextm->dsp->pcm_slot_tx ==
+			    member->dsp->pcm_slot_rx &&
+			    nextm->dsp->pcm_slot_rx ==
+			    member->dsp->pcm_slot_tx &&
+			    member->dsp->pcm_slot_tx !=
+			    member->dsp->pcm_slot_rx &&
+			    member->dsp->pcm_bank_tx == 0 &&
+			    member->dsp->pcm_bank_rx == 0 &&
+			    nextm->dsp->pcm_bank_tx == 0 &&
+			    nextm->dsp->pcm_bank_rx == 0) {
+				/* all members have same slot */
+				if (dsp_debug & DEBUG_DSP_CMX)
+					printk(KERN_DEBUG
+					    "%s dsp %s & %s stay joined on PCM "
+					    "slot %d (TX) %d (RX) on same chip "
+					    "or one bank PCM)\n", __func__,
+					    member->dsp->name,
+					    nextm->dsp->name,
+					    member->dsp->pcm_slot_tx,
+					    member->dsp->pcm_slot_rx);
+				conf->hardware = 0;
+				conf->software = 1;
+				return;
+			}
+			/* find two new slot */
+			memset(freeslots, 1, sizeof(freeslots));
+			list_for_each_entry(dsp, &dsp_ilist, list) {
+				if (dsp != member->dsp &&
+				    dsp != nextm->dsp &&
+				    member->dsp->features.pcm_id ==
+				    dsp->features.pcm_id) {
+					if (dsp->pcm_slot_rx >= 0 &&
+					    dsp->pcm_slot_rx <
+					    sizeof(freeslots))
+						freeslots[dsp->pcm_slot_tx] = 0;
+					if (dsp->pcm_slot_tx >= 0 &&
+					    dsp->pcm_slot_tx <
+					    sizeof(freeslots))
+						freeslots[dsp->pcm_slot_rx] = 0;
+				}
+			}
+			i1 = 0;
+			ii = member->dsp->features.pcm_slots;
+			while (i1 < ii) {
+				if (freeslots[i1])
+					break;
+				i1++;
+			}
+			if (i1 == ii) {
+				if (dsp_debug & DEBUG_DSP_CMX)
+					printk(KERN_DEBUG
+					    "%s no slot available "
+					    "for %s & %s\n", __func__,
+					    member->dsp->name,
+					    nextm->dsp->name);
+				/* no more slots available */
+				goto conf_software;
+			}
+			i2 = i1+1;
+			while (i2 < ii) {
+				if (freeslots[i2])
+					break;
+				i2++;
+			}
+			if (i2 == ii) {
+				if (dsp_debug & DEBUG_DSP_CMX)
+					printk(KERN_DEBUG
+					    "%s no slot available "
+					    "for %s & %s\n",
+					    __func__,
+					    member->dsp->name,
+					    nextm->dsp->name);
+				/* no more slots available */
+				goto conf_software;
+			}
+			/* assign free slots */
+			member->dsp->pcm_slot_tx = i1;
+			member->dsp->pcm_slot_rx = i2;
+			nextm->dsp->pcm_slot_tx = i2;
+			nextm->dsp->pcm_slot_rx = i1;
+			member->dsp->pcm_bank_rx = 0;
+			member->dsp->pcm_bank_tx = 0;
+			nextm->dsp->pcm_bank_rx = 0;
+			nextm->dsp->pcm_bank_tx = 0;
+			if (dsp_debug & DEBUG_DSP_CMX)
+				printk(KERN_DEBUG
+				    "%s adding %s & %s to new PCM slot %d "
+				    "(TX) %d (RX) on same chip or one bank "
+				    "PCM, because both members have not "
+				    "crossed slots\n", __func__,
+				    member->dsp->name,
+				    nextm->dsp->name,
+				    member->dsp->pcm_slot_tx,
+				    member->dsp->pcm_slot_rx);
+			dsp_cmx_hw_message(member->dsp, MISDN_CTRL_HFC_PCM_CONN,
+			    member->dsp->pcm_slot_tx, member->dsp->pcm_bank_tx,
+			    member->dsp->pcm_slot_rx, member->dsp->pcm_bank_rx);
+			dsp_cmx_hw_message(nextm->dsp, MISDN_CTRL_HFC_PCM_CONN,
+			    nextm->dsp->pcm_slot_tx, nextm->dsp->pcm_bank_tx,
+			    nextm->dsp->pcm_slot_rx, nextm->dsp->pcm_bank_rx);
+			conf->hardware = 1;
+			conf->software = 0;
+			return;
+		}
+	}
+
+	/*
+	 * if we have more than two, we may check if we have a conference
+	 * unit available on the chip. also all members must be on the same
+	 */
+
+	/* if not the same HFC chip */
+	if (same_hfc < 0) {
+		if (dsp_debug & DEBUG_DSP_CMX)
+			printk(KERN_DEBUG
+			    "%s conference %d cannot be formed, because "
+			    "members are on different chips or not "
+			    "on HFC chip\n",
+			    __func__, conf->id);
+		goto conf_software;
+	}
+
+	/* for more than two members.. */
+
+	/* in case of hdlc, we change to software */
+	if (dsp->hdlc)
+		goto conf_software;
+
+	/* if all members already have the same conference */
+	if (all_conf)
+		return;
+
+	/*
+	 * if there is an existing conference, but not all members have joined
+	 */
+	if (current_conf >= 0) {
+join_members:
+		list_for_each_entry(member, &conf->mlist, list) {
+			/* join to current conference */
+			if (member->dsp->hfc_conf == current_conf)
+				continue;
+			/* get a free timeslot first */
+			memset(freeslots, 1, sizeof(freeslots));
+			list_for_each_entry(dsp, &dsp_ilist, list) {
+				/*
+				 * not checking current member, because
+				 * slot will be overwritten.
+				 */
+				if (
+				    dsp != member->dsp &&
+				/* dsp must be on the same PCM */
+				    member->dsp->features.pcm_id ==
+				    dsp->features.pcm_id) {
+					/* dsp must be on a slot */
+					if (dsp->pcm_slot_tx >= 0 &&
+					    dsp->pcm_slot_tx <
+					    sizeof(freeslots))
+						freeslots[dsp->pcm_slot_tx] = 0;
+					if (dsp->pcm_slot_rx >= 0 &&
+					    dsp->pcm_slot_rx <
+					    sizeof(freeslots))
+						freeslots[dsp->pcm_slot_rx] = 0;
+				}
+			}
+			i = 0;
+			ii = member->dsp->features.pcm_slots;
+			while (i < ii) {
+				if (freeslots[i])
+					break;
+				i++;
+			}
+			if (i == ii) {
+				/* no more slots available */
+				if (dsp_debug & DEBUG_DSP_CMX)
+					printk(KERN_DEBUG
+					    "%s conference %d cannot be formed,"
+					    " because no slot free\n",
+					    __func__, conf->id);
+				goto conf_software;
+			}
+			if (dsp_debug & DEBUG_DSP_CMX)
+				printk(KERN_DEBUG
+				    "%s changing dsp %s to HW conference "
+				    "%d slot %d\n", __func__,
+				    member->dsp->name, current_conf, i);
+			/* assign free slot & set PCM & join conf */
+			member->dsp->pcm_slot_tx = i;
+			member->dsp->pcm_slot_rx = i;
+			member->dsp->pcm_bank_tx = 2; /* loop */
+			member->dsp->pcm_bank_rx = 2;
+			member->dsp->hfc_conf = current_conf;
+			dsp_cmx_hw_message(member->dsp, MISDN_CTRL_HFC_PCM_CONN,
+			    i, 2, i, 2);
+			dsp_cmx_hw_message(member->dsp,
+			    MISDN_CTRL_HFC_CONF_JOIN, current_conf, 0, 0, 0);
+		}
+		return;
+	}
+
+	/*
+	 * no member is in a conference yet, so we find a free one
+	 */
+	memset(freeunits, 1, sizeof(freeunits));
+	list_for_each_entry(dsp, &dsp_ilist, list) {
+		/* dsp must be on the same chip */
+		if (dsp->features.hfc_id == same_hfc &&
+		    /* dsp must have joined a HW conference */
+		    dsp->hfc_conf >= 0 &&
+		    /* slot must be within range */
+		    dsp->hfc_conf < 8)
+			freeunits[dsp->hfc_conf] = 0;
+	}
+	i = 0;
+	ii = 8;
+	while (i < ii) {
+		if (freeunits[i])
+			break;
+		i++;
+	}
+	if (i == ii) {
+		/* no more conferences available */
+		if (dsp_debug & DEBUG_DSP_CMX)
+			printk(KERN_DEBUG
+			    "%s conference %d cannot be formed, because "
+			    "no conference number free\n",
+			    __func__, conf->id);
+		goto conf_software;
+	}
+	/* join all members */
+	current_conf = i;
+	goto join_members;
+}
+
+
+/*
+ * conf_id != 0: join or change conference
+ * conf_id == 0: split from conference if not already
+ */
+int
+dsp_cmx_conf(struct dsp *dsp, u32 conf_id)
+{
+	int err;
+	struct dsp_conf *conf;
+	struct dsp_conf_member	*member;
+
+	/* if conference doesn't change */
+	if (dsp->conf_id == conf_id)
+		return 0;
+
+	/* first remove us from current conf */
+	if (dsp->conf_id) {
+		if (dsp_debug & DEBUG_DSP_CMX)
+			printk(KERN_DEBUG "removing us from conference %d\n",
+				dsp->conf->id);
+		/* remove us from conf */
+		conf = dsp->conf;
+		err = dsp_cmx_del_conf_member(dsp);
+		if (err)
+			return err;
+		dsp->conf_id = 0;
+
+		/* update hardware */
+		dsp_cmx_hardware(NULL, dsp);
+
+		/* conf now empty? */
+		if (list_empty(&conf->mlist)) {
+			if (dsp_debug & DEBUG_DSP_CMX)
+				printk(KERN_DEBUG
+				    "conference is empty, so we remove it.\n");
+			err = dsp_cmx_del_conf(conf);
+			if (err)
+				return err;
+		} else {
+			/* update members left on conf */
+			dsp_cmx_hardware(conf, NULL);
+		}
+	}
+
+	/* if split */
+	if (!conf_id)
+		return 0;
+
+	/* now add us to conf */
+	if (dsp_debug & DEBUG_DSP_CMX)
+		printk(KERN_DEBUG "searching conference %d\n",
+			conf_id);
+	conf = dsp_cmx_search_conf(conf_id);
+	if (!conf) {
+		if (dsp_debug & DEBUG_DSP_CMX)
+			printk(KERN_DEBUG
+			    "conference doesn't exist yet, creating.\n");
+		/* the conference doesn't exist, so we create */
+		conf = dsp_cmx_new_conf(conf_id);
+		if (!conf)
+			return -EINVAL;
+	} else if (!list_empty(&conf->mlist)) {
+		member = list_entry(conf->mlist.next, struct dsp_conf_member,
+			list);
+		if (dsp->hdlc && !member->dsp->hdlc) {
+			if (dsp_debug & DEBUG_DSP_CMX)
+				printk(KERN_DEBUG
+				    "cannot join transparent conference.\n");
+			return -EINVAL;
+		}
+		if (!dsp->hdlc && member->dsp->hdlc) {
+			if (dsp_debug & DEBUG_DSP_CMX)
+				printk(KERN_DEBUG
+				    "cannot join hdlc conference.\n");
+			return -EINVAL;
+		}
+	}
+	/* add conference member */
+	err = dsp_cmx_add_conf_member(dsp, conf);
+	if (err)
+		return err;
+	dsp->conf_id = conf_id;
+
+	/* if we are alone, we do nothing! */
+	if (list_empty(&conf->mlist)) {
+		if (dsp_debug & DEBUG_DSP_CMX)
+			printk(KERN_DEBUG
+			    "we are alone in this conference, so exit.\n");
+		/* update hardware */
+		dsp_cmx_hardware(NULL, dsp);
+		return 0;
+	}
+
+	/* update members on conf */
+	dsp_cmx_hardware(conf, NULL);
+
+	return 0;
+}
+
+
+/*
+ * audio data is received from card
+ */
+void
+dsp_cmx_receive(struct dsp *dsp, struct sk_buff *skb)
+{
+	u8 *d, *p;
+	int len = skb->len;
+	struct mISDNhead *hh = mISDN_HEAD_P(skb);
+	int w, i, ii;
+
+	/* check if we have sompen */
+	if (len < 1)
+		return;
+
+	/* half of the buffer should be larger than maximum packet size */
+	if (len >= CMX_BUFF_HALF) {
+		printk(KERN_ERR
+		    "%s line %d: packet from card is too large (%d bytes). "
+		    "please make card send smaller packets OR increase "
+		    "CMX_BUFF_SIZE\n", __FILE__, __LINE__, len);
+		return;
+	}
+
+	/*
+	 * initialize pointers if not already -
+	 * also add delay if requested by PH_SIGNAL
+	 */
+	if (dsp->rx_init) {
+		dsp->rx_init = 0;
+		if (dsp->features.unordered) {
+			dsp->rx_R = (hh->id & CMX_BUFF_MASK);
+			dsp->rx_W = (dsp->rx_R + dsp->cmx_delay)
+				& CMX_BUFF_MASK;
+		} else {
+			dsp->rx_R = 0;
+			dsp->rx_W = dsp->cmx_delay;
+		}
+	}
+	/* if frame contains time code, write directly */
+	if (dsp->features.unordered) {
+		dsp->rx_W = (hh->id & CMX_BUFF_MASK);
+		/* printk(KERN_DEBUG "%s %08x\n", dsp->name, hh->id); */
+	}
+	/*
+	 * if we underrun (or maybe overrun),
+	 * we set our new read pointer, and write silence to buffer
+	 */
+	if (((dsp->rx_W-dsp->rx_R) & CMX_BUFF_MASK) >= CMX_BUFF_HALF) {
+		if (dsp_debug & DEBUG_DSP_CMX)
+			printk(KERN_DEBUG
+			    "cmx_receive(dsp=%lx): UNDERRUN (or overrun the "
+			    "maximum delay), adjusting read pointer! "
+			    "(inst %s)\n", (u_long)dsp, dsp->name);
+		/* flush buffer */
+		if (dsp->features.unordered) {
+			dsp->rx_R = (hh->id & CMX_BUFF_MASK);
+			dsp->rx_W = (dsp->rx_R + dsp->cmx_delay)
+				& CMX_BUFF_MASK;
+		} else {
+			dsp->rx_R = 0;
+			dsp->rx_W = dsp->cmx_delay;
+		}
+		memset(dsp->rx_buff, dsp_silence, sizeof(dsp->rx_buff));
+	}
+	/* if we have reached double delay, jump back to middle */
+	if (dsp->cmx_delay)
+		if (((dsp->rx_W - dsp->rx_R) & CMX_BUFF_MASK) >=
+		    (dsp->cmx_delay << 1)) {
+			if (dsp_debug & DEBUG_DSP_CMX)
+				printk(KERN_DEBUG
+				    "cmx_receive(dsp=%lx): OVERRUN (because "
+				    "twice the delay is reached), adjusting "
+				    "read pointer! (inst %s)\n",
+				    (u_long)dsp, dsp->name);
+		/* flush buffer */
+		if (dsp->features.unordered) {
+			dsp->rx_R = (hh->id & CMX_BUFF_MASK);
+			dsp->rx_W = (dsp->rx_R + dsp->cmx_delay)
+				& CMX_BUFF_MASK;
+		} else {
+			dsp->rx_R = 0;
+			dsp->rx_W = dsp->cmx_delay;
+		}
+		memset(dsp->rx_buff, dsp_silence, sizeof(dsp->rx_buff));
+	}
+
+	/* show where to write */
+#ifdef CMX_DEBUG
+	printk(KERN_DEBUG
+	    "cmx_receive(dsp=%lx): rx_R(dsp)=%05x rx_W(dsp)=%05x len=%d %s\n",
+	    (u_long)dsp, dsp->rx_R, dsp->rx_W, len, dsp->name);
+#endif
+
+	/* write data into rx_buffer */
+	p = skb->data;
+	d = dsp->rx_buff;
+	w = dsp->rx_W;
+	i = 0;
+	ii = len;
+	while (i < ii) {
+		d[w++ & CMX_BUFF_MASK] = *p++;
+		i++;
+	}
+
+	/* increase write-pointer */
+	dsp->rx_W = ((dsp->rx_W+len) & CMX_BUFF_MASK);
+}
+
+
+/*
+ * send (mixed) audio data to card and control jitter
+ */
+static void
+dsp_cmx_send_member(struct dsp *dsp, int len, s32 *c, int members)
+{
+	struct dsp_conf *conf = dsp->conf;
+	struct dsp *member, *other;
+	register s32 sample;
+	u8 *d, *p, *q, *o_q;
+	struct sk_buff *nskb, *txskb;
+	int r, rr, t, tt, o_r, o_rr;
+	int preload = 0;
+	struct mISDNhead *hh, *thh;
+
+	/* don't process if: */
+	if (!dsp->b_active) { /* if not active */
+		dsp->last_tx = 0;
+		return;
+	}
+	if (dsp->pcm_slot_tx >= 0 && /* connected to pcm slot */
+	    dsp->tx_R == dsp->tx_W && /* AND no tx-data */
+	    !(dsp->tone.tone && dsp->tone.software)) { /* AND not soft tones */
+		dsp->last_tx = 0;
+		return;
+	}
+
+#ifdef CMX_DEBUG
+	printk(KERN_DEBUG
+	    "SEND members=%d dsp=%s, conf=%p, rx_R=%05x rx_W=%05x\n",
+	    members, dsp->name, conf, dsp->rx_R, dsp->rx_W);
+#endif
+
+	/* preload if we have delay set */
+	if (dsp->cmx_delay && !dsp->last_tx) {
+		preload = len;
+		if (preload < 128)
+			preload = 128;
+	}
+
+	/* PREPARE RESULT */
+	nskb = mI_alloc_skb(len + preload, GFP_ATOMIC);
+	if (!nskb) {
+		printk(KERN_ERR
+		    "FATAL ERROR in mISDN_dsp.o: cannot alloc %d bytes\n",
+		    len + preload);
+		return;
+	}
+	hh = mISDN_HEAD_P(nskb);
+	hh->prim = PH_DATA_REQ;
+	hh->id = 0;
+	dsp->last_tx = 1;
+
+	/* set pointers, indexes and stuff */
+	member = dsp;
+	p = dsp->tx_buff; /* transmit data */
+	q = dsp->rx_buff; /* received data */
+	d = skb_put(nskb, preload + len); /* result */
+	t = dsp->tx_R; /* tx-pointers */
+	tt = dsp->tx_W;
+	r = dsp->rx_R; /* rx-pointers */
+	rr = (r + len) & CMX_BUFF_MASK;
+
+	/* preload with silence, if required */
+	if (preload) {
+		memset(d, dsp_silence, preload);
+		d += preload;
+	}
+
+	/* PROCESS TONES/TX-DATA ONLY */
+	if (dsp->tone.tone && dsp->tone.software) {
+		/* -> copy tone */
+		dsp_tone_copy(dsp, d, len);
+		dsp->tx_R = 0; /* clear tx buffer */
+		dsp->tx_W = 0;
+		goto send_packet;
+	}
+	/* if we have tx-data but do not use mixing */
+	if (!dsp->tx_mix && t != tt) {
+		/* -> send tx-data and continue when not enough */
+#ifdef CMX_TX_DEBUG
+	sprintf(debugbuf, "TX sending (%04x-%04x)%p: ", t, tt, p);
+#endif
+		while (r != rr && t != tt) {
+#ifdef CMX_TX_DEBUG
+			if (strlen(debugbuf) < 48)
+			    sprintf(debugbuf+strlen(debugbuf), " %02x", p[t]);
+#endif
+			*d++ = p[t]; /* write tx_buff */
+			t = (t+1) & CMX_BUFF_MASK;
+			r = (r+1) & CMX_BUFF_MASK;
+		}
+		if (r == rr) {
+			dsp->tx_R = t;
+#ifdef CMX_TX_DEBUG
+	printk(KERN_DEBUG "%s\n", debugbuf);
+#endif
+			goto send_packet;
+		}
+	}
+#ifdef CMX_TX_DEBUG
+	printk(KERN_DEBUG "%s\n", debugbuf);
+#endif
+
+	/* PROCESS DATA (one member / no conf) */
+	if (!conf || members <= 1) {
+		/* -> if echo is NOT enabled */
+		if (!dsp->echo) {
+			/* -> send tx-data if available or use 0-volume */
+			while (r != rr && t != tt) {
+				*d++ = p[t]; /* write tx_buff */
+				t = (t+1) & CMX_BUFF_MASK;
+				r = (r+1) & CMX_BUFF_MASK;
+			}
+			if (r != rr)
+				memset(d, dsp_silence, (rr-r)&CMX_BUFF_MASK);
+		/* -> if echo is enabled */
+		} else {
+			/*
+			 * -> mix tx-data with echo if available,
+			 * or use echo only
+			 */
+			while (r != rr && t != tt) {
+				*d++ = dsp_audio_mix_law[(p[t]<<8)|q[r]];
+				t = (t+1) & CMX_BUFF_MASK;
+				r = (r+1) & CMX_BUFF_MASK;
+			}
+			while (r != rr) {
+				*d++ = q[r]; /* echo */
+				r = (r+1) & CMX_BUFF_MASK;
+			}
+		}
+		dsp->tx_R = t;
+		goto send_packet;
+	}
+	/* PROCESS DATA (two members) */
+#ifdef CMX_CONF_DEBUG
+	if (0) {
+#else
+	if (members == 2) {
+#endif
+		/* "other" becomes other party */
+		other = (list_entry(conf->mlist.next,
+		    struct dsp_conf_member, list))->dsp;
+		if (other == member)
+			other = (list_entry(conf->mlist.prev,
+			    struct dsp_conf_member, list))->dsp;
+		o_q = other->rx_buff; /* received data */
+		o_rr = (other->rx_R + len) & CMX_BUFF_MASK;
+			/* end of rx-pointer */
+		o_r = (o_rr - rr + r) & CMX_BUFF_MASK;
+			/* start rx-pointer at current read position*/
+		/* -> if echo is NOT enabled */
+		if (!dsp->echo) {
+			/*
+			 * -> copy other member's rx-data,
+			 * if tx-data is available, mix
+			 */
+			while (o_r != o_rr && t != tt) {
+				*d++ = dsp_audio_mix_law[(p[t]<<8)|o_q[o_r]];
+				t = (t+1) & CMX_BUFF_MASK;
+				o_r = (o_r+1) & CMX_BUFF_MASK;
+			}
+			while (o_r != o_rr) {
+				*d++ = o_q[o_r];
+				o_r = (o_r+1) & CMX_BUFF_MASK;
+			}
+		/* -> if echo is enabled */
+		} else {
+			/*
+			 * -> mix other member's rx-data with echo,
+			 * if tx-data is available, mix
+			 */
+			while (r != rr && t != tt) {
+				sample = dsp_audio_law_to_s32[p[t]] +
+				    dsp_audio_law_to_s32[q[r]] +
+				    dsp_audio_law_to_s32[o_q[o_r]];
+				if (sample < -32768)
+					sample = -32768;
+				else if (sample > 32767)
+					sample = 32767;
+				*d++ = dsp_audio_s16_to_law[sample & 0xffff];
+				    /* tx-data + rx_data + echo */
+				t = (t+1) & CMX_BUFF_MASK;
+				r = (r+1) & CMX_BUFF_MASK;
+				o_r = (o_r+1) & CMX_BUFF_MASK;
+			}
+			while (r != rr) {
+				*d++ = dsp_audio_mix_law[(q[r]<<8)|o_q[o_r]];
+				r = (r+1) & CMX_BUFF_MASK;
+				o_r = (o_r+1) & CMX_BUFF_MASK;
+			}
+		}
+		dsp->tx_R = t;
+		goto send_packet;
+	}
+#ifdef DSP_NEVER_DEFINED
+	}
+#endif
+	/* PROCESS DATA (three or more members) */
+	/* -> if echo is NOT enabled */
+	if (!dsp->echo) {
+		/*
+		 * -> substract rx-data from conf-data,
+		 * if tx-data is available, mix
+		 */
+		while (r != rr && t != tt) {
+			sample = dsp_audio_law_to_s32[p[t]] + *c++ -
+			    dsp_audio_law_to_s32[q[r]];
+			if (sample < -32768)
+				sample = -32768;
+			else if (sample > 32767)
+				sample = 32767;
+			*d++ = dsp_audio_s16_to_law[sample & 0xffff];
+			    /* conf-rx+tx */
+			r = (r+1) & CMX_BUFF_MASK;
+			t = (t+1) & CMX_BUFF_MASK;
+		}
+		while (r != rr) {
+			sample = *c++ - dsp_audio_law_to_s32[q[r]];
+			if (sample < -32768)
+				sample = -32768;
+			else if (sample > 32767)
+				sample = 32767;
+			*d++ = dsp_audio_s16_to_law[sample & 0xffff];
+			    /* conf-rx */
+			r = (r+1) & CMX_BUFF_MASK;
+		}
+	/* -> if echo is enabled */
+	} else {
+		/*
+		 * -> encode conf-data, if tx-data
+		 * is available, mix
+		 */
+		while (r != rr && t != tt) {
+			sample = dsp_audio_law_to_s32[p[t]] + *c++;
+			if (sample < -32768)
+				sample = -32768;
+			else if (sample > 32767)
+				sample = 32767;
+			*d++ = dsp_audio_s16_to_law[sample & 0xffff];
+			    /* conf(echo)+tx */
+			t = (t+1) & CMX_BUFF_MASK;
+			r = (r+1) & CMX_BUFF_MASK;
+		}
+		while (r != rr) {
+			sample = *c++;
+			if (sample < -32768)
+				sample = -32768;
+			else if (sample > 32767)
+				sample = 32767;
+			*d++ = dsp_audio_s16_to_law[sample & 0xffff];
+			    /* conf(echo) */
+			r = (r+1) & CMX_BUFF_MASK;
+		}
+	}
+	dsp->tx_R = t;
+	goto send_packet;
+
+send_packet:
+	/*
+	 * send tx-data if enabled - don't filter,
+	 * becuase we want what we send, not what we filtered
+	 */
+	if (dsp->tx_data) {
+		/* PREPARE RESULT */
+		txskb = mI_alloc_skb(len, GFP_ATOMIC);
+		if (!txskb) {
+			printk(KERN_ERR
+			    "FATAL ERROR in mISDN_dsp.o: "
+			    "cannot alloc %d bytes\n", len);
+		} else {
+			thh = mISDN_HEAD_P(txskb);
+			thh->prim = DL_DATA_REQ;
+			thh->id = 0;
+			memcpy(skb_put(txskb, len), nskb->data+preload, len);
+			/* queue (trigger later) */
+			skb_queue_tail(&dsp->sendq, txskb);
+		}
+	}
+	/* adjust volume */
+	if (dsp->tx_volume)
+		dsp_change_volume(nskb, dsp->tx_volume);
+	/* pipeline */
+	if (dsp->pipeline.inuse)
+		dsp_pipeline_process_tx(&dsp->pipeline, nskb->data, nskb->len);
+	/* crypt */
+	if (dsp->bf_enable)
+		dsp_bf_encrypt(dsp, nskb->data, nskb->len);
+	/* queue and trigger */
+	skb_queue_tail(&dsp->sendq, nskb);
+	schedule_work(&dsp->workq);
+}
+
+u32	samplecount;
+struct timer_list dsp_spl_tl;
+u32	dsp_spl_jiffies; /* calculate the next time to fire */
+u32	dsp_start_jiffies; /* jiffies at the time, the calculation begins */
+struct timeval dsp_start_tv; /* time at start of calculation */
+
+void
+dsp_cmx_send(void *arg)
+{
+	struct dsp_conf *conf;
+	struct dsp_conf_member *member;
+	struct dsp *dsp;
+	int mustmix, members;
+	s32 mixbuffer[MAX_POLL+100], *c;
+	u8 *p, *q;
+	int r, rr;
+	int jittercheck = 0, delay, i;
+	u_long flags;
+	struct timeval tv;
+	u32 elapsed;
+	s16 length;
+
+	/* lock */
+	spin_lock_irqsave(&dsp_lock, flags);
+
+	if (!dsp_start_tv.tv_sec) {
+		do_gettimeofday(&dsp_start_tv);
+		length = dsp_poll;
+	} else {
+		do_gettimeofday(&tv);
+		elapsed = ((tv.tv_sec - dsp_start_tv.tv_sec) * 8000)
+		    + ((s32)(tv.tv_usec / 125) - (dsp_start_tv.tv_usec / 125));
+		dsp_start_tv.tv_sec = tv.tv_sec;
+		dsp_start_tv.tv_usec = tv.tv_usec;
+		length = elapsed;
+	}
+	if (length > MAX_POLL + 100)
+		length = MAX_POLL + 100;
+/* printk(KERN_DEBUG "len=%d dsp_count=0x%x.%04x dsp_poll_diff=0x%x.%04x\n",
+ length, dsp_count >> 16, dsp_count & 0xffff, dsp_poll_diff >> 16,
+ dsp_poll_diff & 0xffff);
+ */
+
+	/*
+	 * check if jitter needs to be checked
+	 * (this is about every second = 8192 samples)
+	 */
+	samplecount += length;
+	if ((samplecount & 8191) < length)
+		jittercheck = 1;
+
+	/* loop all members that do not require conference mixing */
+	list_for_each_entry(dsp, &dsp_ilist, list) {
+		if (dsp->hdlc)
+			continue;
+		conf = dsp->conf;
+		mustmix = 0;
+		members = 0;
+		if (conf) {
+			members = count_list_member(&conf->mlist);
+#ifdef CMX_CONF_DEBUG
+			if (conf->software && members > 1)
+#else
+			if (conf->software && members > 2)
+#endif
+				mustmix = 1;
+		}
+
+		/* transmission required */
+		if (!mustmix) {
+			dsp_cmx_send_member(dsp, length, mixbuffer, members);
+
+			/*
+			 * unused mixbuffer is given to prevent a
+			 * potential null-pointer-bug
+			 */
+		}
+	}
+
+	/* loop all members that require conference mixing */
+	list_for_each_entry(conf, &conf_ilist, list) {
+		/* count members and check hardware */
+		members = count_list_member(&conf->mlist);
+#ifdef CMX_CONF_DEBUG
+		if (conf->software && members > 1) {
+#else
+		if (conf->software && members > 2) {
+#endif
+			/* check for hdlc conf */
+			member = list_entry(conf->mlist.next,
+				struct dsp_conf_member, list);
+			if (member->dsp->hdlc)
+				continue;
+			/* mix all data */
+			memset(mixbuffer, 0, length*sizeof(s32));
+			list_for_each_entry(member, &conf->mlist, list) {
+				dsp = member->dsp;
+				/* get range of data to mix */
+				c = mixbuffer;
+				q = dsp->rx_buff;
+				r = dsp->rx_R;
+				rr = (r + length) & CMX_BUFF_MASK;
+				/* add member's data */
+				while (r != rr) {
+					*c++ += dsp_audio_law_to_s32[q[r]];
+					r = (r+1) & CMX_BUFF_MASK;
+				}
+			}
+
+			/* process each member */
+			list_for_each_entry(member, &conf->mlist, list) {
+				/* transmission */
+				dsp_cmx_send_member(member->dsp, length,
+				    mixbuffer, members);
+			}
+		}
+	}
+
+	/* delete rx-data, increment buffers, change pointers */
+	list_for_each_entry(dsp, &dsp_ilist, list) {
+		if (dsp->hdlc)
+			continue;
+		p = dsp->rx_buff;
+		q = dsp->tx_buff;
+		r = dsp->rx_R;
+		/* move receive pointer when receiving */
+		if (!dsp->rx_is_off) {
+			rr = (r + length) & CMX_BUFF_MASK;
+			/* delete rx-data */
+			while (r != rr) {
+				p[r] = dsp_silence;
+				r = (r+1) & CMX_BUFF_MASK;
+			}
+			/* increment rx-buffer pointer */
+			dsp->rx_R = r; /* write incremented read pointer */
+		}
+
+		/* check current rx_delay */
+		delay = (dsp->rx_W-dsp->rx_R) & CMX_BUFF_MASK;
+		if (delay >= CMX_BUFF_HALF)
+			delay = 0; /* will be the delay before next write */
+		/* check for lower delay */
+		if (delay < dsp->rx_delay[0])
+			dsp->rx_delay[0] = delay;
+		/* check current tx_delay */
+		delay = (dsp->tx_W-dsp->tx_R) & CMX_BUFF_MASK;
+		if (delay >= CMX_BUFF_HALF)
+			delay = 0; /* will be the delay before next write */
+		/* check for lower delay */
+		if (delay < dsp->tx_delay[0])
+			dsp->tx_delay[0] = delay;
+		if (jittercheck) {
+			/* find the lowest of all rx_delays */
+			delay = dsp->rx_delay[0];
+			i = 1;
+			while (i < MAX_SECONDS_JITTER_CHECK) {
+				if (delay > dsp->rx_delay[i])
+					delay = dsp->rx_delay[i];
+				i++;
+			}
+			/*
+			 * remove rx_delay only if we have delay AND we
+			 * have not preset cmx_delay
+			 */
+			if (delay && !dsp->cmx_delay) {
+				if (dsp_debug & DEBUG_DSP_CMX)
+					printk(KERN_DEBUG
+					    "%s lowest rx_delay of %d bytes for"
+					    " dsp %s are now removed.\n",
+					    __func__, delay,
+					    dsp->name);
+				r = dsp->rx_R;
+				rr = (r + delay) & CMX_BUFF_MASK;
+				/* delete rx-data */
+				while (r != rr) {
+					p[r] = dsp_silence;
+					r = (r+1) & CMX_BUFF_MASK;
+				}
+				/* increment rx-buffer pointer */
+				dsp->rx_R = r;
+				    /* write incremented read pointer */
+			}
+			/* find the lowest of all tx_delays */
+			delay = dsp->tx_delay[0];
+			i = 1;
+			while (i < MAX_SECONDS_JITTER_CHECK) {
+				if (delay > dsp->tx_delay[i])
+					delay = dsp->tx_delay[i];
+				i++;
+			}
+			/*
+			 * remove delay only if we have delay AND we
+			 * have enabled tx_dejitter
+			 */
+			if (delay && dsp->tx_dejitter) {
+				if (dsp_debug & DEBUG_DSP_CMX)
+					printk(KERN_DEBUG
+					    "%s lowest tx_delay of %d bytes for"
+					    " dsp %s are now removed.\n",
+					    __func__, delay,
+					    dsp->name);
+				r = dsp->tx_R;
+				rr = (r + delay) & CMX_BUFF_MASK;
+				/* delete tx-data */
+				while (r != rr) {
+					q[r] = dsp_silence;
+					r = (r+1) & CMX_BUFF_MASK;
+				}
+				/* increment rx-buffer pointer */
+				dsp->tx_R = r;
+				    /* write incremented read pointer */
+			}
+			/* scroll up delays */
+			i = MAX_SECONDS_JITTER_CHECK - 1;
+			while (i) {
+				dsp->rx_delay[i] = dsp->rx_delay[i-1];
+				dsp->tx_delay[i] = dsp->tx_delay[i-1];
+				i--;
+			}
+			dsp->tx_delay[0] = CMX_BUFF_HALF; /* (infinite) delay */
+			dsp->rx_delay[0] = CMX_BUFF_HALF; /* (infinite) delay */
+		}
+	}
+
+	/* if next event would be in the past ... */
+	if ((s32)(dsp_spl_jiffies+dsp_tics-jiffies) <= 0)
+		dsp_spl_jiffies = jiffies + 1;
+	else
+		dsp_spl_jiffies += dsp_tics;
+
+	dsp_spl_tl.expires = dsp_spl_jiffies;
+	add_timer(&dsp_spl_tl);
+
+	/* unlock */
+	spin_unlock_irqrestore(&dsp_lock, flags);
+}
+
+/*
+ * audio data is transmitted from upper layer to the dsp
+ */
+void
+dsp_cmx_transmit(struct dsp *dsp, struct sk_buff *skb)
+{
+	u_int w, ww;
+	u8 *d, *p;
+	int space; /* todo: , l = skb->len; */
+#ifdef CMX_TX_DEBUG
+	char debugbuf[256] = "";
+#endif
+
+	/* check if there is enough space, and then copy */
+	w = dsp->tx_W;
+	ww = dsp->tx_R;
+	p = dsp->tx_buff;
+	d = skb->data;
+	space = ww-w;
+	if (space <= 0)
+		space += CMX_BUFF_SIZE;
+	/* write-pointer should not overrun nor reach read pointer */
+	if (space-1 < skb->len)
+		/* write to the space we have left */
+		ww = (ww - 1) & CMX_BUFF_MASK;
+	else
+		/* write until all byte are copied */
+		ww = (w + skb->len) & CMX_BUFF_MASK;
+	dsp->tx_W = ww;
+
+	/* show current buffer */
+#ifdef CMX_DEBUG
+	printk(KERN_DEBUG
+	    "cmx_transmit(dsp=%lx) %d bytes to 0x%x-0x%x. %s\n",
+	    (u_long)dsp, (ww-w)&CMX_BUFF_MASK, w, ww, dsp->name);
+#endif
+
+	/* copy transmit data to tx-buffer */
+#ifdef CMX_TX_DEBUG
+	sprintf(debugbuf, "TX getting (%04x-%04x)%p: ", w, ww, p);
+#endif
+	while (w != ww) {
+#ifdef CMX_TX_DEBUG
+		if (strlen(debugbuf) < 48)
+			sprintf(debugbuf+strlen(debugbuf), " %02x", *d);
+#endif
+		p[w] = *d++;
+		w = (w+1) & CMX_BUFF_MASK;
+	}
+#ifdef CMX_TX_DEBUG
+	printk(KERN_DEBUG "%s\n", debugbuf);
+#endif
+
+}
+
+/*
+ * hdlc data is received from card and sent to all members.
+ */
+void
+dsp_cmx_hdlc(struct dsp *dsp, struct sk_buff *skb)
+{
+	struct sk_buff *nskb = NULL;
+	struct dsp_conf_member *member;
+	struct mISDNhead *hh;
+
+	/* not if not active */
+	if (!dsp->b_active)
+		return;
+
+	/* check if we have sompen */
+	if (skb->len < 1)
+		return;
+
+	/* no conf */
+	if (!dsp->conf) {
+		/* in case of hardware (echo) */
+		if (dsp->pcm_slot_tx >= 0)
+			return;
+		if (dsp->echo)
+			nskb = skb_clone(skb, GFP_ATOMIC);
+			if (nskb) {
+				hh = mISDN_HEAD_P(nskb);
+				hh->prim = PH_DATA_REQ;
+				hh->id = 0;
+				skb_queue_tail(&dsp->sendq, nskb);
+				schedule_work(&dsp->workq);
+			}
+		return;
+	}
+	/* in case of hardware conference */
+	if (dsp->conf->hardware)
+		return;
+	list_for_each_entry(member, &dsp->conf->mlist, list) {
+		if (dsp->echo || member->dsp != dsp) {
+			nskb = skb_clone(skb, GFP_ATOMIC);
+			if (nskb) {
+				hh = mISDN_HEAD_P(nskb);
+				hh->prim = PH_DATA_REQ;
+				hh->id = 0;
+				skb_queue_tail(&member->dsp->sendq, nskb);
+				schedule_work(&member->dsp->workq);
+			}
+		}
+	}
+}
+
+
diff --git a/drivers/isdn/mISDN/dsp_core.c b/drivers/isdn/mISDN/dsp_core.c
new file mode 100644
index 000000000000..2f10ed82c0db
--- /dev/null
+++ b/drivers/isdn/mISDN/dsp_core.c
@@ -0,0 +1,1191 @@
+/*
+ * Author       Andreas Eversberg (jolly@eversberg.eu)
+ * Based on source code structure by
+ *		Karsten Keil (keil@isdn4linux.de)
+ *
+ *		This file is (c) under GNU PUBLIC LICENSE
+ *		For changes and modifications please read
+ *		../../../Documentation/isdn/mISDN.cert
+ *
+ * Thanks to    Karsten Keil (great drivers)
+ *              Cologne Chip (great chips)
+ *
+ * This module does:
+ *		Real-time tone generation
+ *		DTMF detection
+ *		Real-time cross-connection and conferrence
+ *		Compensate jitter due to system load and hardware fault.
+ *		All features are done in kernel space and will be realized
+ *		using hardware, if available and supported by chip set.
+ *		Blowfish encryption/decryption
+ */
+
+/* STRUCTURE:
+ *
+ * The dsp module provides layer 2 for b-channels (64kbit). It provides
+ * transparent audio forwarding with special digital signal processing:
+ *
+ * - (1) generation of tones
+ * - (2) detection of dtmf tones
+ * - (3) crossconnecting and conferences (clocking)
+ * - (4) echo generation for delay test
+ * - (5) volume control
+ * - (6) disable receive data
+ * - (7) pipeline
+ * - (8) encryption/decryption
+ *
+ * Look:
+ *             TX            RX
+ *         ------upper layer------
+ *             |             ^
+ *             |             |(6)
+ *             v             |
+ *       +-----+-------------+-----+
+ *       |(3)(4)                   |
+ *       |           CMX           |
+ *       |                         |
+ *       |           +-------------+
+ *       |           |       ^
+ *       |           |       |
+ *       |+---------+|  +----+----+
+ *       ||(1)      ||  |(2)      |
+ *       ||         ||  |         |
+ *       ||  Tones  ||  |  DTMF   |
+ *       ||         ||  |         |
+ *       ||         ||  |         |
+ *       |+----+----+|  +----+----+
+ *       +-----+-----+       ^
+ *             |             |
+ *             v             |
+ *        +----+----+   +----+----+
+ *        |(5)      |   |(5)      |
+ *        |         |   |         |
+ *        |TX Volume|   |RX Volume|
+ *        |         |   |         |
+ *        |         |   |         |
+ *        +----+----+   +----+----+
+ *             |             ^
+ *             |             |
+ *             v             |
+ *        +----+-------------+----+
+ *        |(7)                    |
+ *        |                       |
+ *        |  Pipeline Processing  |
+ *        |                       |
+ *        |                       |
+ *        +----+-------------+----+
+ *             |             ^
+ *             |             |
+ *             v             |
+ *        +----+----+   +----+----+
+ *        |(8)      |   |(8)      |
+ *        |         |   |         |
+ *        | Encrypt |   | Decrypt |
+ *        |         |   |         |
+ *        |         |   |         |
+ *        +----+----+   +----+----+
+ *             |             ^
+ *             |             |
+ *             v             |
+ *         ------card  layer------
+ *             TX            RX
+ *
+ * Above you can see the logical data flow. If software is used to do the
+ * process, it is actually the real data flow. If hardware is used, data
+ * may not flow, but hardware commands to the card, to provide the data flow
+ * as shown.
+ *
+ * NOTE: The channel must be activated in order to make dsp work, even if
+ * no data flow to the upper layer is intended. Activation can be done
+ * after and before controlling the setting using PH_CONTROL requests.
+ *
+ * DTMF: Will be detected by hardware if possible. It is done before CMX
+ * processing.
+ *
+ * Tones: Will be generated via software if endless looped audio fifos are
+ * not supported by hardware. Tones will override all data from CMX.
+ * It is not required to join a conference to use tones at any time.
+ *
+ * CMX: Is transparent when not used. When it is used, it will do
+ * crossconnections and conferences via software if not possible through
+ * hardware. If hardware capability is available, hardware is used.
+ *
+ * Echo: Is generated by CMX and is used to check performane of hard and
+ * software CMX.
+ *
+ * The CMX has special functions for conferences with one, two and more
+ * members. It will allow different types of data flow. Receive and transmit
+ * data to/form upper layer may be swithed on/off individually without loosing
+ * features of CMX, Tones and DTMF.
+ *
+ * Echo Cancellation: Sometimes we like to cancel echo from the interface.
+ * Note that a VoIP call may not have echo caused by the IP phone. The echo
+ * is generated by the telephone line connected to it. Because the delay
+ * is high, it becomes an echo. RESULT: Echo Cachelation is required if
+ * both echo AND delay is applied to an interface.
+ * Remember that software CMX always generates a more or less delay.
+ *
+ * If all used features can be realized in hardware, and if transmit and/or
+ * receive data ist disabled, the card may not send/receive any data at all.
+ * Not receiving is usefull if only announcements are played. Not sending is
+ * usefull if an answering machine records audio. Not sending and receiving is
+ * usefull during most states of the call. If supported by hardware, tones
+ * will be played without cpu load. Small PBXs and NT-Mode applications will
+ * not need expensive hardware when processing calls.
+ *
+ *
+ * LOCKING:
+ *
+ * When data is received from upper or lower layer (card), the complete dsp
+ * module is locked by a global lock.  This lock MUST lock irq, because it
+ * must lock timer events by DSP poll timer.
+ * When data is ready to be transmitted down, the data is queued and sent
+ * outside lock and timer event.
+ * PH_CONTROL must not change any settings, join or split conference members
+ * during process of data.
+ *
+ * HDLC:
+ *
+ * It works quite the same as transparent, except that HDLC data is forwarded
+ * to all other conference members if no hardware bridging is possible.
+ * Send data will be writte to sendq. Sendq will be sent if confirm is received.
+ * Conference cannot join, if one member is not hdlc.
+ *
+ */
+
+#include <linux/delay.h>
+#include <linux/mISDNif.h>
+#include <linux/mISDNdsp.h>
+#include <linux/module.h>
+#include <linux/vmalloc.h>
+#include "core.h"
+#include "dsp.h"
+
+const char *mISDN_dsp_revision = "2.0";
+
+static int debug;
+static int options;
+static int poll;
+static int dtmfthreshold = 100;
+
+MODULE_AUTHOR("Andreas Eversberg");
+module_param(debug, uint, S_IRUGO | S_IWUSR);
+module_param(options, uint, S_IRUGO | S_IWUSR);
+module_param(poll, uint, S_IRUGO | S_IWUSR);
+module_param(dtmfthreshold, uint, S_IRUGO | S_IWUSR);
+MODULE_LICENSE("GPL");
+
+/*int spinnest = 0;*/
+
+spinlock_t dsp_lock; /* global dsp lock */
+struct list_head dsp_ilist;
+struct list_head conf_ilist;
+int dsp_debug;
+int dsp_options;
+int dsp_poll, dsp_tics;
+
+/* check if rx may be turned off or must be turned on */
+static void
+dsp_rx_off_member(struct dsp *dsp)
+{
+	struct mISDN_ctrl_req	cq;
+	int rx_off = 1;
+
+	if (!dsp->features_rx_off)
+		return;
+
+	/* not disabled */
+	if (!dsp->rx_disabled)
+		rx_off = 0;
+	/* software dtmf */
+	else if (dsp->dtmf.software)
+		rx_off = 0;
+	/* echo in software */
+	else if (dsp->echo && dsp->pcm_slot_tx < 0)
+		rx_off = 0;
+	/* bridge in software */
+	else if (dsp->conf) {
+		if (dsp->conf->software)
+			rx_off = 0;
+	}
+
+	if (rx_off == dsp->rx_is_off)
+		return;
+
+	if (!dsp->ch.peer) {
+		if (dsp_debug & DEBUG_DSP_CORE)
+			printk(KERN_DEBUG "%s: no peer, no rx_off\n",
+				__func__);
+		return;
+	}
+	cq.op = MISDN_CTRL_RX_OFF;
+	cq.p1 = rx_off;
+	if (dsp->ch.peer->ctrl(dsp->ch.peer, CONTROL_CHANNEL, &cq)) {
+		printk(KERN_DEBUG "%s: 2nd CONTROL_CHANNEL failed\n",
+			__func__);
+		return;
+	}
+	dsp->rx_is_off = rx_off;
+	if (dsp_debug & DEBUG_DSP_CORE)
+		printk(KERN_DEBUG "%s: %s set rx_off = %d\n",
+			__func__, dsp->name, rx_off);
+}
+static void
+dsp_rx_off(struct dsp *dsp)
+{
+	struct dsp_conf_member	*member;
+
+	if (dsp_options & DSP_OPT_NOHARDWARE)
+		return;
+
+	/* no conf */
+	if (!dsp->conf) {
+		dsp_rx_off_member(dsp);
+		return;
+	}
+	/* check all members in conf */
+	list_for_each_entry(member, &dsp->conf->mlist, list) {
+		dsp_rx_off_member(member->dsp);
+	}
+}
+
+static int
+dsp_control_req(struct dsp *dsp, struct mISDNhead *hh, struct sk_buff *skb)
+{
+	struct		sk_buff *nskb;
+	int ret = 0;
+	int cont;
+	u8 *data;
+	int len;
+
+	if (skb->len < sizeof(int))
+		printk(KERN_ERR "%s: PH_CONTROL message too short\n", __func__);
+	cont = *((int *)skb->data);
+	len = skb->len - sizeof(int);
+	data = skb->data + sizeof(int);
+
+	switch (cont) {
+	case DTMF_TONE_START: /* turn on DTMF */
+		if (dsp->hdlc) {
+			ret = -EINVAL;
+			break;
+		}
+		if (dsp_debug & DEBUG_DSP_CORE)
+			printk(KERN_DEBUG "%s: start dtmf\n", __func__);
+		if (len == sizeof(int)) {
+			printk(KERN_NOTICE "changing DTMF Threshold "
+				"to %d\n", *((int *)data));
+			dsp->dtmf.treshold = (*(int *)data) * 10000;
+		}
+		/* init goertzel */
+		dsp_dtmf_goertzel_init(dsp);
+
+		/* check dtmf hardware */
+		dsp_dtmf_hardware(dsp);
+		break;
+	case DTMF_TONE_STOP: /* turn off DTMF */
+		if (dsp_debug & DEBUG_DSP_CORE)
+			printk(KERN_DEBUG "%s: stop dtmf\n", __func__);
+		dsp->dtmf.hardware = 0;
+		dsp->dtmf.software = 0;
+		break;
+	case DSP_CONF_JOIN: /* join / update conference */
+		if (len < sizeof(int)) {
+			ret = -EINVAL;
+			break;
+		}
+		if (*((u32 *)data) == 0)
+			goto conf_split;
+		if (dsp_debug & DEBUG_DSP_CORE)
+			printk(KERN_DEBUG "%s: join conference %d\n",
+				__func__, *((u32 *)data));
+		ret = dsp_cmx_conf(dsp, *((u32 *)data));
+			/* dsp_cmx_hardware will also be called here */
+		dsp_rx_off(dsp);
+		if (dsp_debug & DEBUG_DSP_CMX)
+			dsp_cmx_debug(dsp);
+		break;
+	case DSP_CONF_SPLIT: /* remove from conference */
+conf_split:
+		if (dsp_debug & DEBUG_DSP_CORE)
+			printk(KERN_DEBUG "%s: release conference\n", __func__);
+		ret = dsp_cmx_conf(dsp, 0);
+			/* dsp_cmx_hardware will also be called here */
+		if (dsp_debug & DEBUG_DSP_CMX)
+			dsp_cmx_debug(dsp);
+		dsp_rx_off(dsp);
+		break;
+	case DSP_TONE_PATT_ON: /* play tone */
+		if (dsp->hdlc) {
+			ret = -EINVAL;
+			break;
+		}
+		if (len < sizeof(int)) {
+			ret = -EINVAL;
+			break;
+		}
+		if (dsp_debug & DEBUG_DSP_CORE)
+			printk(KERN_DEBUG "%s: turn tone 0x%x on\n",
+				__func__, *((int *)skb->data));
+		ret = dsp_tone(dsp, *((int *)data));
+		if (!ret) {
+			dsp_cmx_hardware(dsp->conf, dsp);
+			dsp_rx_off(dsp);
+		}
+		if (!dsp->tone.tone)
+			goto tone_off;
+		break;
+	case DSP_TONE_PATT_OFF: /* stop tone */
+		if (dsp->hdlc) {
+			ret = -EINVAL;
+			break;
+		}
+		if (dsp_debug & DEBUG_DSP_CORE)
+			printk(KERN_DEBUG "%s: turn tone off\n", __func__);
+		dsp_tone(dsp, 0);
+		dsp_cmx_hardware(dsp->conf, dsp);
+		dsp_rx_off(dsp);
+		/* reset tx buffers (user space data) */
+tone_off:
+		dsp->rx_W = 0;
+		dsp->rx_R = 0;
+		break;
+	case DSP_VOL_CHANGE_TX: /* change volume */
+		if (dsp->hdlc) {
+			ret = -EINVAL;
+			break;
+		}
+		if (len < sizeof(int)) {
+			ret = -EINVAL;
+			break;
+		}
+		dsp->tx_volume = *((int *)data);
+		if (dsp_debug & DEBUG_DSP_CORE)
+			printk(KERN_DEBUG "%s: change tx vol to %d\n",
+				__func__, dsp->tx_volume);
+		dsp_cmx_hardware(dsp->conf, dsp);
+		dsp_dtmf_hardware(dsp);
+		dsp_rx_off(dsp);
+		break;
+	case DSP_VOL_CHANGE_RX: /* change volume */
+		if (dsp->hdlc) {
+			ret = -EINVAL;
+			break;
+		}
+		if (len < sizeof(int)) {
+			ret = -EINVAL;
+			break;
+		}
+		dsp->rx_volume = *((int *)data);
+		if (dsp_debug & DEBUG_DSP_CORE)
+			printk(KERN_DEBUG "%s: change rx vol to %d\n",
+				__func__, dsp->tx_volume);
+		dsp_cmx_hardware(dsp->conf, dsp);
+		dsp_dtmf_hardware(dsp);
+		dsp_rx_off(dsp);
+		break;
+	case DSP_ECHO_ON: /* enable echo */
+		dsp->echo = 1; /* soft echo */
+		if (dsp_debug & DEBUG_DSP_CORE)
+			printk(KERN_DEBUG "%s: enable cmx-echo\n", __func__);
+		dsp_cmx_hardware(dsp->conf, dsp);
+		dsp_rx_off(dsp);
+		if (dsp_debug & DEBUG_DSP_CMX)
+			dsp_cmx_debug(dsp);
+		break;
+	case DSP_ECHO_OFF: /* disable echo */
+		dsp->echo = 0;
+		if (dsp_debug & DEBUG_DSP_CORE)
+			printk(KERN_DEBUG "%s: disable cmx-echo\n", __func__);
+		dsp_cmx_hardware(dsp->conf, dsp);
+		dsp_rx_off(dsp);
+		if (dsp_debug & DEBUG_DSP_CMX)
+			dsp_cmx_debug(dsp);
+		break;
+	case DSP_RECEIVE_ON: /* enable receive to user space */
+		if (dsp_debug & DEBUG_DSP_CORE)
+			printk(KERN_DEBUG "%s: enable receive to user "
+				"space\n", __func__);
+		dsp->rx_disabled = 0;
+		dsp_rx_off(dsp);
+		break;
+	case DSP_RECEIVE_OFF: /* disable receive to user space */
+		if (dsp_debug & DEBUG_DSP_CORE)
+			printk(KERN_DEBUG "%s: disable receive to "
+				"user space\n", __func__);
+		dsp->rx_disabled = 1;
+		dsp_rx_off(dsp);
+		break;
+	case DSP_MIX_ON: /* enable mixing of tx data */
+		if (dsp->hdlc) {
+			ret = -EINVAL;
+			break;
+		}
+		if (dsp_debug & DEBUG_DSP_CORE)
+			printk(KERN_DEBUG "%s: enable mixing of "
+				"tx-data with conf mebers\n", __func__);
+		dsp->tx_mix = 1;
+		dsp_cmx_hardware(dsp->conf, dsp);
+		dsp_rx_off(dsp);
+		if (dsp_debug & DEBUG_DSP_CMX)
+			dsp_cmx_debug(dsp);
+		break;
+	case DSP_MIX_OFF: /* disable mixing of tx data */
+		if (dsp->hdlc) {
+			ret = -EINVAL;
+			break;
+		}
+		if (dsp_debug & DEBUG_DSP_CORE)
+			printk(KERN_DEBUG "%s: disable mixing of "
+				"tx-data with conf mebers\n", __func__);
+		dsp->tx_mix = 0;
+		dsp_cmx_hardware(dsp->conf, dsp);
+		dsp_rx_off(dsp);
+		if (dsp_debug & DEBUG_DSP_CMX)
+			dsp_cmx_debug(dsp);
+		break;
+	case DSP_TXDATA_ON: /* enable txdata */
+		dsp->tx_data = 1;
+		if (dsp_debug & DEBUG_DSP_CORE)
+			printk(KERN_DEBUG "%s: enable tx-data\n", __func__);
+		dsp_cmx_hardware(dsp->conf, dsp);
+		dsp_rx_off(dsp);
+		if (dsp_debug & DEBUG_DSP_CMX)
+			dsp_cmx_debug(dsp);
+		break;
+	case DSP_TXDATA_OFF: /* disable txdata */
+		dsp->tx_data = 0;
+		if (dsp_debug & DEBUG_DSP_CORE)
+			printk(KERN_DEBUG "%s: disable tx-data\n", __func__);
+		dsp_cmx_hardware(dsp->conf, dsp);
+		dsp_rx_off(dsp);
+		if (dsp_debug & DEBUG_DSP_CMX)
+			dsp_cmx_debug(dsp);
+		break;
+	case DSP_DELAY: /* use delay algorithm instead of dynamic
+			   jitter algorithm */
+		if (dsp->hdlc) {
+			ret = -EINVAL;
+			break;
+		}
+		if (len < sizeof(int)) {
+			ret = -EINVAL;
+			break;
+		}
+		dsp->cmx_delay = (*((int *)data)) << 3;
+			/* miliseconds to samples */
+		if (dsp->cmx_delay >= (CMX_BUFF_HALF>>1))
+			/* clip to half of maximum usable buffer
+			(half of half buffer) */
+			dsp->cmx_delay = (CMX_BUFF_HALF>>1) - 1;
+		if (dsp_debug & DEBUG_DSP_CORE)
+			printk(KERN_DEBUG "%s: use delay algorithm to "
+				"compensate jitter (%d samples)\n",
+				__func__, dsp->cmx_delay);
+		break;
+	case DSP_JITTER: /* use dynamic jitter algorithm instead of
+		    delay algorithm */
+		if (dsp->hdlc) {
+			ret = -EINVAL;
+			break;
+		}
+		dsp->cmx_delay = 0;
+		if (dsp_debug & DEBUG_DSP_CORE)
+			printk(KERN_DEBUG "%s: use jitter algorithm to "
+				"compensate jitter\n", __func__);
+		break;
+	case DSP_TX_DEJITTER: /* use dynamic jitter algorithm for tx-buffer */
+		if (dsp->hdlc) {
+			ret = -EINVAL;
+			break;
+		}
+		dsp->tx_dejitter = 1;
+		if (dsp_debug & DEBUG_DSP_CORE)
+			printk(KERN_DEBUG "%s: use dejitter on TX "
+				"buffer\n", __func__);
+		break;
+	case DSP_TX_DEJ_OFF: /* use tx-buffer without dejittering*/
+		if (dsp->hdlc) {
+			ret = -EINVAL;
+			break;
+		}
+		dsp->tx_dejitter = 0;
+		if (dsp_debug & DEBUG_DSP_CORE)
+			printk(KERN_DEBUG "%s: use TX buffer without "
+				"dejittering\n", __func__);
+		break;
+	case DSP_PIPELINE_CFG:
+		if (dsp->hdlc) {
+			ret = -EINVAL;
+			break;
+		}
+		if (len > 0 && ((char *)data)[len - 1]) {
+			printk(KERN_DEBUG "%s: pipeline config string "
+				"is not NULL terminated!\n", __func__);
+			ret = -EINVAL;
+		} else {
+			dsp->pipeline.inuse = 1;
+			dsp_cmx_hardware(dsp->conf, dsp);
+			ret = dsp_pipeline_build(&dsp->pipeline,
+				len > 0 ? (char *)data : NULL);
+			dsp_cmx_hardware(dsp->conf, dsp);
+			dsp_rx_off(dsp);
+		}
+		break;
+	case DSP_BF_ENABLE_KEY: /* turn blowfish on */
+		if (dsp->hdlc) {
+			ret = -EINVAL;
+			break;
+		}
+		if (len < 4 || len > 56) {
+			ret = -EINVAL;
+			break;
+		}
+		if (dsp_debug & DEBUG_DSP_CORE)
+			printk(KERN_DEBUG "%s: turn blowfish on (key "
+				"not shown)\n", __func__);
+		ret = dsp_bf_init(dsp, (u8 *)data, len);
+		/* set new cont */
+		if (!ret)
+			cont = DSP_BF_ACCEPT;
+		else
+			cont = DSP_BF_REJECT;
+		/* send indication if it worked to set it */
+		nskb = _alloc_mISDN_skb(PH_CONTROL_IND, MISDN_ID_ANY,
+			sizeof(int), &cont, GFP_ATOMIC);
+		if (nskb) {
+			if (dsp->up) {
+				if (dsp->up->send(dsp->up, nskb))
+					dev_kfree_skb(nskb);
+			} else
+				dev_kfree_skb(nskb);
+		}
+		if (!ret) {
+			dsp_cmx_hardware(dsp->conf, dsp);
+			dsp_dtmf_hardware(dsp);
+			dsp_rx_off(dsp);
+		}
+		break;
+	case DSP_BF_DISABLE: /* turn blowfish off */
+		if (dsp->hdlc) {
+			ret = -EINVAL;
+			break;
+		}
+		if (dsp_debug & DEBUG_DSP_CORE)
+			printk(KERN_DEBUG "%s: turn blowfish off\n", __func__);
+		dsp_bf_cleanup(dsp);
+		dsp_cmx_hardware(dsp->conf, dsp);
+		dsp_dtmf_hardware(dsp);
+		dsp_rx_off(dsp);
+		break;
+	default:
+		if (dsp_debug & DEBUG_DSP_CORE)
+			printk(KERN_DEBUG "%s: ctrl req %x unhandled\n",
+				__func__, cont);
+		ret = -EINVAL;
+	}
+	return ret;
+}
+
+static void
+get_features(struct mISDNchannel *ch)
+{
+	struct dsp		*dsp = container_of(ch, struct dsp, ch);
+	struct mISDN_ctrl_req	cq;
+
+	if (dsp_options & DSP_OPT_NOHARDWARE)
+		return;
+	if (!ch->peer) {
+		if (dsp_debug & DEBUG_DSP_CORE)
+			printk(KERN_DEBUG "%s: no peer, no features\n",
+				__func__);
+		return;
+	}
+	memset(&cq, 0, sizeof(cq));
+	cq.op = MISDN_CTRL_GETOP;
+	if (ch->peer->ctrl(ch->peer, CONTROL_CHANNEL, &cq) < 0) {
+		printk(KERN_DEBUG "%s: CONTROL_CHANNEL failed\n",
+			__func__);
+		return;
+	}
+	if (cq.op & MISDN_CTRL_RX_OFF)
+		dsp->features_rx_off = 1;
+	if ((cq.op & MISDN_CTRL_HW_FEATURES_OP)) {
+		cq.op = MISDN_CTRL_HW_FEATURES;
+		*((u_long *)&cq.p1) = (u_long)&dsp->features;
+		if (ch->peer->ctrl(ch->peer, CONTROL_CHANNEL, &cq)) {
+			printk(KERN_DEBUG "%s: 2nd CONTROL_CHANNEL failed\n",
+				__func__);
+		}
+	} else
+		if (dsp_debug & DEBUG_DSP_CORE)
+			printk(KERN_DEBUG "%s: features not supported for %s\n",
+				__func__, dsp->name);
+}
+
+static int
+dsp_function(struct mISDNchannel *ch,  struct sk_buff *skb)
+{
+	struct dsp			*dsp = container_of(ch, struct dsp, ch);
+	struct mISDNhead	*hh;
+	int			ret = 0;
+	u8			*digits;
+	int			cont;
+	struct			sk_buff *nskb;
+	u_long			flags;
+
+	hh = mISDN_HEAD_P(skb);
+	switch (hh->prim) {
+	/* FROM DOWN */
+	case (PH_DATA_CNF):
+		dsp->data_pending = 0;
+		/* trigger next hdlc frame, if any */
+		if (dsp->hdlc) {
+			spin_lock_irqsave(&dsp_lock, flags);
+			if (dsp->b_active)
+				schedule_work(&dsp->workq);
+			spin_unlock_irqrestore(&dsp_lock, flags);
+		}
+		break;
+	case (PH_DATA_IND):
+	case (DL_DATA_IND):
+		if (skb->len < 1) {
+			ret = -EINVAL;
+			break;
+		}
+		if (dsp->rx_is_off) {
+			if (dsp_debug & DEBUG_DSP_CORE)
+				printk(KERN_DEBUG "%s: rx-data during rx_off"
+					" for %s\n",
+				__func__, dsp->name);
+		}
+		if (dsp->hdlc) {
+			/* hdlc */
+			spin_lock_irqsave(&dsp_lock, flags);
+			dsp_cmx_hdlc(dsp, skb);
+			spin_unlock_irqrestore(&dsp_lock, flags);
+			if (dsp->rx_disabled) {
+				/* if receive is not allowed */
+				break;
+			}
+			hh->prim = DL_DATA_IND;
+			if (dsp->up)
+				return dsp->up->send(dsp->up, skb);
+			break;
+		}
+
+		/* decrypt if enabled */
+		if (dsp->bf_enable)
+			dsp_bf_decrypt(dsp, skb->data, skb->len);
+		/* pipeline */
+		if (dsp->pipeline.inuse)
+			dsp_pipeline_process_rx(&dsp->pipeline, skb->data,
+				skb->len);
+		/* change volume if requested */
+		if (dsp->rx_volume)
+			dsp_change_volume(skb, dsp->rx_volume);
+
+		/* check if dtmf soft decoding is turned on */
+		if (dsp->dtmf.software) {
+			digits = dsp_dtmf_goertzel_decode(dsp, skb->data,
+				skb->len, (dsp_options&DSP_OPT_ULAW)?1:0);
+			while (*digits) {
+				if (dsp_debug & DEBUG_DSP_DTMF)
+					printk(KERN_DEBUG "%s: digit"
+					    "(%c) to layer %s\n",
+					    __func__, *digits, dsp->name);
+				cont = DTMF_TONE_VAL | *digits;
+				nskb = _alloc_mISDN_skb(PH_CONTROL_IND,
+				    MISDN_ID_ANY, sizeof(int), &cont,
+				    GFP_ATOMIC);
+				if (nskb) {
+					if (dsp->up) {
+						if (dsp->up->send(
+						    dsp->up, nskb))
+						dev_kfree_skb(nskb);
+					} else
+						dev_kfree_skb(nskb);
+				}
+				digits++;
+			}
+		}
+		/* we need to process receive data if software */
+		spin_lock_irqsave(&dsp_lock, flags);
+		if (dsp->pcm_slot_tx < 0 && dsp->pcm_slot_rx < 0) {
+			/* process data from card at cmx */
+			dsp_cmx_receive(dsp, skb);
+		}
+		spin_unlock_irqrestore(&dsp_lock, flags);
+
+		if (dsp->rx_disabled) {
+			/* if receive is not allowed */
+			break;
+		}
+		hh->prim = DL_DATA_IND;
+		if (dsp->up)
+			return dsp->up->send(dsp->up, skb);
+		break;
+	case (PH_CONTROL_IND):
+		if (dsp_debug & DEBUG_DSP_DTMFCOEFF)
+			printk(KERN_DEBUG "%s: PH_CONTROL INDICATION "
+				"received: %x (len %d) %s\n", __func__,
+				hh->id, skb->len, dsp->name);
+		switch (hh->id) {
+		case (DTMF_HFC_COEF): /* getting coefficients */
+			if (!dsp->dtmf.hardware) {
+				if (dsp_debug & DEBUG_DSP_DTMFCOEFF)
+					printk(KERN_DEBUG "%s: ignoring DTMF "
+						"coefficients from HFC\n",
+						__func__);
+				break;
+			}
+			digits = dsp_dtmf_goertzel_decode(dsp, skb->data,
+				skb->len, 2);
+			while (*digits) {
+				int k;
+				struct sk_buff *nskb;
+				if (dsp_debug & DEBUG_DSP_DTMF)
+					printk(KERN_DEBUG "%s: digit"
+					    "(%c) to layer %s\n",
+					    __func__, *digits, dsp->name);
+				k = *digits | DTMF_TONE_VAL;
+				nskb = _alloc_mISDN_skb(PH_CONTROL_IND,
+					MISDN_ID_ANY, sizeof(int), &k,
+					GFP_ATOMIC);
+				if (nskb) {
+					if (dsp->up) {
+						if (dsp->up->send(
+						    dsp->up, nskb))
+						dev_kfree_skb(nskb);
+					} else
+						dev_kfree_skb(nskb);
+				}
+				digits++;
+			}
+			break;
+		case (HFC_VOL_CHANGE_TX): /* change volume */
+			if (skb->len != sizeof(int)) {
+				ret = -EINVAL;
+				break;
+			}
+			spin_lock_irqsave(&dsp_lock, flags);
+			dsp->tx_volume = *((int *)skb->data);
+			if (dsp_debug & DEBUG_DSP_CORE)
+				printk(KERN_DEBUG "%s: change tx volume to "
+					"%d\n", __func__, dsp->tx_volume);
+			dsp_cmx_hardware(dsp->conf, dsp);
+			dsp_dtmf_hardware(dsp);
+			dsp_rx_off(dsp);
+			spin_unlock_irqrestore(&dsp_lock, flags);
+			break;
+		default:
+			if (dsp_debug & DEBUG_DSP_CORE)
+				printk(KERN_DEBUG "%s: ctrl ind %x unhandled "
+					"%s\n", __func__, hh->id, dsp->name);
+			ret = -EINVAL;
+		}
+		break;
+	case (PH_ACTIVATE_IND):
+	case (PH_ACTIVATE_CNF):
+		if (dsp_debug & DEBUG_DSP_CORE)
+			printk(KERN_DEBUG "%s: b_channel is now active %s\n",
+				__func__, dsp->name);
+		/* bchannel now active */
+		spin_lock_irqsave(&dsp_lock, flags);
+		dsp->b_active = 1;
+		dsp->data_pending = 0;
+		dsp->rx_init = 1;
+			/* rx_W and rx_R will be adjusted on first frame */
+		dsp->rx_W = 0;
+		dsp->rx_R = 0;
+		memset(dsp->rx_buff, 0, sizeof(dsp->rx_buff));
+		dsp_cmx_hardware(dsp->conf, dsp);
+		dsp_dtmf_hardware(dsp);
+		dsp_rx_off(dsp);
+		spin_unlock_irqrestore(&dsp_lock, flags);
+		if (dsp_debug & DEBUG_DSP_CORE)
+			printk(KERN_DEBUG "%s: done with activation, sending "
+				"confirm to user space. %s\n", __func__,
+				dsp->name);
+		/* send activation to upper layer */
+		hh->prim = DL_ESTABLISH_CNF;
+		if (dsp->up)
+			return dsp->up->send(dsp->up, skb);
+		break;
+	case (PH_DEACTIVATE_IND):
+	case (PH_DEACTIVATE_CNF):
+		if (dsp_debug & DEBUG_DSP_CORE)
+			printk(KERN_DEBUG "%s: b_channel is now inactive %s\n",
+				__func__, dsp->name);
+		/* bchannel now inactive */
+		spin_lock_irqsave(&dsp_lock, flags);
+		dsp->b_active = 0;
+		dsp->data_pending = 0;
+		dsp_cmx_hardware(dsp->conf, dsp);
+		dsp_rx_off(dsp);
+		spin_unlock_irqrestore(&dsp_lock, flags);
+		hh->prim = DL_RELEASE_CNF;
+		if (dsp->up)
+			return dsp->up->send(dsp->up, skb);
+		break;
+	/* FROM UP */
+	case (DL_DATA_REQ):
+	case (PH_DATA_REQ):
+		if (skb->len < 1) {
+			ret = -EINVAL;
+			break;
+		}
+		if (dsp->hdlc) {
+			/* hdlc */
+			spin_lock_irqsave(&dsp_lock, flags);
+			if (dsp->b_active) {
+				skb_queue_tail(&dsp->sendq, skb);
+				schedule_work(&dsp->workq);
+			}
+			spin_unlock_irqrestore(&dsp_lock, flags);
+			return 0;
+		}
+		/* send data to tx-buffer (if no tone is played) */
+		if (!dsp->tone.tone) {
+			spin_lock_irqsave(&dsp_lock, flags);
+			dsp_cmx_transmit(dsp, skb);
+			spin_unlock_irqrestore(&dsp_lock, flags);
+		}
+		break;
+	case (PH_CONTROL_REQ):
+		spin_lock_irqsave(&dsp_lock, flags);
+		ret = dsp_control_req(dsp, hh, skb);
+		spin_unlock_irqrestore(&dsp_lock, flags);
+		break;
+	case (DL_ESTABLISH_REQ):
+	case (PH_ACTIVATE_REQ):
+		if (dsp_debug & DEBUG_DSP_CORE)
+			printk(KERN_DEBUG "%s: activating b_channel %s\n",
+				__func__, dsp->name);
+		if (dsp->dtmf.hardware || dsp->dtmf.software)
+			dsp_dtmf_goertzel_init(dsp);
+		get_features(ch);
+		/* send ph_activate */
+		hh->prim = PH_ACTIVATE_REQ;
+		if (ch->peer)
+			return ch->recv(ch->peer, skb);
+		break;
+	case (DL_RELEASE_REQ):
+	case (PH_DEACTIVATE_REQ):
+		if (dsp_debug & DEBUG_DSP_CORE)
+			printk(KERN_DEBUG "%s: releasing b_channel %s\n",
+				__func__, dsp->name);
+		spin_lock_irqsave(&dsp_lock, flags);
+		dsp->tone.tone = 0;
+		dsp->tone.hardware = 0;
+		dsp->tone.software = 0;
+		if (timer_pending(&dsp->tone.tl))
+			del_timer(&dsp->tone.tl);
+		if (dsp->conf)
+			dsp_cmx_conf(dsp, 0); /* dsp_cmx_hardware will also be
+						 called here */
+		skb_queue_purge(&dsp->sendq);
+		spin_unlock_irqrestore(&dsp_lock, flags);
+		hh->prim = PH_DEACTIVATE_REQ;
+		if (ch->peer)
+			return ch->recv(ch->peer, skb);
+		break;
+	default:
+		if (dsp_debug & DEBUG_DSP_CORE)
+			printk(KERN_DEBUG "%s: msg %x unhandled %s\n",
+				__func__, hh->prim, dsp->name);
+		ret = -EINVAL;
+	}
+	if (!ret)
+		dev_kfree_skb(skb);
+	return ret;
+}
+
+static int
+dsp_ctrl(struct mISDNchannel *ch, u_int cmd, void *arg)
+{
+	struct dsp		*dsp = container_of(ch, struct dsp, ch);
+	u_long		flags;
+	int		err = 0;
+
+	if (debug & DEBUG_DSP_CTRL)
+	printk(KERN_DEBUG "%s:(%x)\n", __func__, cmd);
+
+	switch (cmd) {
+	case OPEN_CHANNEL:
+		break;
+	case CLOSE_CHANNEL:
+		if (dsp->ch.peer)
+			dsp->ch.peer->ctrl(dsp->ch.peer, CLOSE_CHANNEL, NULL);
+
+		/* wait until workqueue has finished,
+		 * must lock here, or we may hit send-process currently
+		 * queueing. */
+		spin_lock_irqsave(&dsp_lock, flags);
+		dsp->b_active = 0;
+		spin_unlock_irqrestore(&dsp_lock, flags);
+		/* MUST not be locked, because it waits until queue is done. */
+		cancel_work_sync(&dsp->workq);
+		spin_lock_irqsave(&dsp_lock, flags);
+		if (timer_pending(&dsp->tone.tl))
+			del_timer(&dsp->tone.tl);
+		skb_queue_purge(&dsp->sendq);
+		if (dsp_debug & DEBUG_DSP_CTRL)
+			printk(KERN_DEBUG "%s: releasing member %s\n",
+				__func__, dsp->name);
+		dsp->b_active = 0;
+		dsp_cmx_conf(dsp, 0); /* dsp_cmx_hardware will also be called
+					 here */
+		dsp_pipeline_destroy(&dsp->pipeline);
+
+		if (dsp_debug & DEBUG_DSP_CTRL)
+			printk(KERN_DEBUG "%s: remove & destroy object %s\n",
+				__func__, dsp->name);
+		list_del(&dsp->list);
+		spin_unlock_irqrestore(&dsp_lock, flags);
+
+		if (dsp_debug & DEBUG_DSP_CTRL)
+			printk(KERN_DEBUG "%s: dsp instance released\n",
+				__func__);
+		vfree(dsp);
+		module_put(THIS_MODULE);
+		break;
+	}
+	return err;
+}
+
+static void
+dsp_send_bh(struct work_struct *work)
+{
+	struct dsp *dsp = container_of(work, struct dsp, workq);
+	struct sk_buff *skb;
+	struct mISDNhead	*hh;
+
+	if (dsp->hdlc && dsp->data_pending)
+		return; /* wait until data has been acknowledged */
+
+	/* send queued data */
+	while ((skb = skb_dequeue(&dsp->sendq))) {
+		/* in locked date, we must have still data in queue */
+		if (dsp->data_pending) {
+			if (dsp_debug & DEBUG_DSP_CORE)
+				printk(KERN_DEBUG "%s: fifo full %s, this is "
+					"no bug!\n", __func__, dsp->name);
+			/* flush transparent data, if not acked */
+			dev_kfree_skb(skb);
+			continue;
+		}
+		hh = mISDN_HEAD_P(skb);
+		if (hh->prim == DL_DATA_REQ) {
+			/* send packet up */
+			if (dsp->up) {
+				if (dsp->up->send(dsp->up, skb))
+					dev_kfree_skb(skb);
+			} else
+				dev_kfree_skb(skb);
+		} else {
+			/* send packet down */
+			if (dsp->ch.peer) {
+				dsp->data_pending = 1;
+				if (dsp->ch.recv(dsp->ch.peer, skb)) {
+					dev_kfree_skb(skb);
+					dsp->data_pending = 0;
+				}
+			} else
+				dev_kfree_skb(skb);
+		}
+	}
+}
+
+static int
+dspcreate(struct channel_req *crq)
+{
+	struct dsp		*ndsp;
+	u_long		flags;
+
+	if (crq->protocol != ISDN_P_B_L2DSP
+	 && crq->protocol != ISDN_P_B_L2DSPHDLC)
+		return -EPROTONOSUPPORT;
+	ndsp = vmalloc(sizeof(struct dsp));
+	if (!ndsp) {
+		printk(KERN_ERR "%s: vmalloc struct dsp failed\n", __func__);
+		return -ENOMEM;
+	}
+	memset(ndsp, 0, sizeof(struct dsp));
+	if (dsp_debug & DEBUG_DSP_CTRL)
+		printk(KERN_DEBUG "%s: creating new dsp instance\n", __func__);
+
+	/* default enabled */
+	INIT_WORK(&ndsp->workq, (void *)dsp_send_bh);
+	skb_queue_head_init(&ndsp->sendq);
+	ndsp->ch.send = dsp_function;
+	ndsp->ch.ctrl = dsp_ctrl;
+	ndsp->up = crq->ch;
+	crq->ch = &ndsp->ch;
+	if (crq->protocol == ISDN_P_B_L2DSP) {
+		crq->protocol = ISDN_P_B_RAW;
+		ndsp->hdlc = 0;
+	} else {
+		crq->protocol = ISDN_P_B_HDLC;
+		ndsp->hdlc = 1;
+	}
+	if (!try_module_get(THIS_MODULE))
+		printk(KERN_WARNING "%s:cannot get module\n",
+			__func__);
+
+	sprintf(ndsp->name, "DSP_C%x(0x%p)",
+		ndsp->up->st->dev->id + 1, ndsp);
+	/* set frame size to start */
+	ndsp->features.hfc_id = -1; /* current PCM id */
+	ndsp->features.pcm_id = -1; /* current PCM id */
+	ndsp->pcm_slot_rx = -1; /* current CPM slot */
+	ndsp->pcm_slot_tx = -1;
+	ndsp->pcm_bank_rx = -1;
+	ndsp->pcm_bank_tx = -1;
+	ndsp->hfc_conf = -1; /* current conference number */
+	/* set tone timer */
+	ndsp->tone.tl.function = (void *)dsp_tone_timeout;
+	ndsp->tone.tl.data = (long) ndsp;
+	init_timer(&ndsp->tone.tl);
+
+	if (dtmfthreshold < 20 || dtmfthreshold > 500)
+		dtmfthreshold = 200;
+	ndsp->dtmf.treshold = dtmfthreshold*10000;
+
+	/* init pipeline append to list */
+	spin_lock_irqsave(&dsp_lock, flags);
+	dsp_pipeline_init(&ndsp->pipeline);
+	list_add_tail(&ndsp->list, &dsp_ilist);
+	spin_unlock_irqrestore(&dsp_lock, flags);
+
+	return 0;
+}
+
+
+static struct Bprotocol DSP = {
+	.Bprotocols = (1 << (ISDN_P_B_L2DSP & ISDN_P_B_MASK))
+		| (1 << (ISDN_P_B_L2DSPHDLC & ISDN_P_B_MASK)),
+	.name = "dsp",
+	.create = dspcreate
+};
+
+static int dsp_init(void)
+{
+	int err;
+	int tics;
+
+	printk(KERN_INFO "DSP modul %s\n", mISDN_dsp_revision);
+
+	dsp_options = options;
+	dsp_debug = debug;
+
+	/* set packet size */
+	dsp_poll = poll;
+	if (dsp_poll) {
+		if (dsp_poll > MAX_POLL) {
+			printk(KERN_ERR "%s: Wrong poll value (%d), use %d "
+				"maximum.\n", __func__, poll, MAX_POLL);
+			err = -EINVAL;
+			return err;
+		}
+		if (dsp_poll < 8) {
+			printk(KERN_ERR "%s: Wrong poll value (%d), use 8 "
+				"minimum.\n", __func__, dsp_poll);
+			err = -EINVAL;
+			return err;
+		}
+		dsp_tics = poll * HZ / 8000;
+		if (dsp_tics * 8000 != poll * HZ) {
+			printk(KERN_INFO "mISDN_dsp: Cannot clock every %d "
+				"samples (0,125 ms). It is not a multiple of "
+				"%d HZ.\n", poll, HZ);
+			err = -EINVAL;
+			return err;
+		}
+	} else {
+		poll = 8;
+		while (poll <= MAX_POLL) {
+			tics = poll * HZ / 8000;
+			if (tics * 8000 == poll * HZ) {
+				dsp_tics = tics;
+				dsp_poll = poll;
+				if (poll >= 64)
+					break;
+			}
+			poll++;
+		}
+	}
+	if (dsp_poll == 0) {
+		printk(KERN_INFO "mISDN_dsp: There is no multiple of kernel "
+			"clock that equals exactly the duration of 8-256 "
+			"samples. (Choose kernel clock speed like 100, 250, "
+			"300, 1000)\n");
+		err = -EINVAL;
+		return err;
+	}
+	printk(KERN_INFO "mISDN_dsp: DSP clocks every %d samples. This equals "
+		"%d jiffies.\n", dsp_poll, dsp_tics);
+
+	spin_lock_init(&dsp_lock);
+	INIT_LIST_HEAD(&dsp_ilist);
+	INIT_LIST_HEAD(&conf_ilist);
+
+	/* init conversion tables */
+	dsp_audio_generate_law_tables();
+	dsp_silence = (dsp_options&DSP_OPT_ULAW)?0xff:0x2a;
+	dsp_audio_law_to_s32 = (dsp_options&DSP_OPT_ULAW)?dsp_audio_ulaw_to_s32:
+		dsp_audio_alaw_to_s32;
+	dsp_audio_generate_s2law_table();
+	dsp_audio_generate_seven();
+	dsp_audio_generate_mix_table();
+	if (dsp_options & DSP_OPT_ULAW)
+		dsp_audio_generate_ulaw_samples();
+	dsp_audio_generate_volume_changes();
+
+	err = dsp_pipeline_module_init();
+	if (err) {
+		printk(KERN_ERR "mISDN_dsp: Can't initialize pipeline, "
+			"error(%d)\n", err);
+		return err;
+	}
+
+	err = mISDN_register_Bprotocol(&DSP);
+	if (err) {
+		printk(KERN_ERR "Can't register %s error(%d)\n", DSP.name, err);
+		return err;
+	}
+
+	/* set sample timer */
+	dsp_spl_tl.function = (void *)dsp_cmx_send;
+	dsp_spl_tl.data = 0;
+	init_timer(&dsp_spl_tl);
+	dsp_spl_tl.expires = jiffies + dsp_tics;
+	dsp_spl_jiffies = dsp_spl_tl.expires;
+	add_timer(&dsp_spl_tl);
+
+	return 0;
+}
+
+
+static void dsp_cleanup(void)
+{
+	mISDN_unregister_Bprotocol(&DSP);
+
+	if (timer_pending(&dsp_spl_tl))
+		del_timer(&dsp_spl_tl);
+
+	if (!list_empty(&dsp_ilist)) {
+		printk(KERN_ERR "mISDN_dsp: Audio DSP object inst list not "
+			"empty.\n");
+	}
+	if (!list_empty(&conf_ilist)) {
+		printk(KERN_ERR "mISDN_dsp: Conference list not empty. Not "
+			"all memory freed.\n");
+	}
+
+	dsp_pipeline_module_exit();
+}
+
+module_init(dsp_init);
+module_exit(dsp_cleanup);
+
diff --git a/drivers/isdn/mISDN/dsp_dtmf.c b/drivers/isdn/mISDN/dsp_dtmf.c
new file mode 100644
index 000000000000..efc371c1f0dc
--- /dev/null
+++ b/drivers/isdn/mISDN/dsp_dtmf.c
@@ -0,0 +1,303 @@
+/*
+ * DTMF decoder.
+ *
+ * Copyright            by Andreas Eversberg (jolly@eversberg.eu)
+ *			based on different decoders such as ISDN4Linux
+ *
+ * This software may be used and distributed according to the terms
+ * of the GNU General Public License, incorporated herein by reference.
+ *
+ */
+
+#include <linux/mISDNif.h>
+#include <linux/mISDNdsp.h>
+#include "core.h"
+#include "dsp.h"
+
+#define NCOEFF            8     /* number of frequencies to be analyzed */
+
+/* For DTMF recognition:
+ * 2 * cos(2 * PI * k / N) precalculated for all k
+ */
+static u64 cos2pik[NCOEFF] =
+{
+	/* k << 15 (source: hfc-4s/8s documentation (www.colognechip.de)) */
+	55960, 53912, 51402, 48438, 38146, 32650, 26170, 18630
+};
+
+/* digit matrix */
+static char dtmf_matrix[4][4] =
+{
+	{'1', '2', '3', 'A'},
+	{'4', '5', '6', 'B'},
+	{'7', '8', '9', 'C'},
+	{'*', '0', '#', 'D'}
+};
+
+/* dtmf detection using goertzel algorithm
+ * init function
+ */
+void dsp_dtmf_goertzel_init(struct dsp *dsp)
+{
+	dsp->dtmf.size = 0;
+	dsp->dtmf.lastwhat = '\0';
+	dsp->dtmf.lastdigit = '\0';
+	dsp->dtmf.count = 0;
+}
+
+/* check for hardware or software features
+ */
+void dsp_dtmf_hardware(struct dsp *dsp)
+{
+	int hardware = 1;
+
+	if (!dsp->features.hfc_dtmf)
+		hardware = 0;
+
+	/* check for volume change */
+	if (dsp->tx_volume) {
+		if (dsp_debug & DEBUG_DSP_DTMF)
+			printk(KERN_DEBUG "%s dsp %s cannot do hardware DTMF, "
+				"because tx_volume is changed\n",
+				__func__, dsp->name);
+		hardware = 0;
+	}
+	if (dsp->rx_volume) {
+		if (dsp_debug & DEBUG_DSP_DTMF)
+			printk(KERN_DEBUG "%s dsp %s cannot do hardware DTMF, "
+				"because rx_volume is changed\n",
+				__func__, dsp->name);
+		hardware = 0;
+	}
+	/* check if encryption is enabled */
+	if (dsp->bf_enable) {
+		if (dsp_debug & DEBUG_DSP_DTMF)
+			printk(KERN_DEBUG "%s dsp %s cannot do hardware DTMF, "
+				"because encryption is enabled\n",
+				__func__, dsp->name);
+		hardware = 0;
+	}
+	/* check if pipeline exists */
+	if (dsp->pipeline.inuse) {
+		if (dsp_debug & DEBUG_DSP_DTMF)
+			printk(KERN_DEBUG "%s dsp %s cannot do hardware DTMF, "
+				"because pipeline exists.\n",
+				__func__, dsp->name);
+		hardware = 0;
+	}
+
+	dsp->dtmf.hardware = hardware;
+	dsp->dtmf.software = !hardware;
+}
+
+
+/*************************************************************
+ * calculate the coefficients of the given sample and decode *
+ *************************************************************/
+
+/* the given sample is decoded. if the sample is not long enough for a
+ * complete frame, the decoding is finished and continued with the next
+ * call of this function.
+ *
+ * the algorithm is very good for detection with a minimum of errors. i
+ * tested it allot. it even works with very short tones (40ms). the only
+ * disadvantage is, that it doesn't work good with different volumes of both
+ * tones. this will happen, if accoustically coupled dialers are used.
+ * it sometimes detects tones during speach, which is normal for decoders.
+ * use sequences to given commands during calls.
+ *
+ * dtmf - points to a structure of the current dtmf state
+ * spl and len - the sample
+ * fmt - 0 = alaw, 1 = ulaw, 2 = coefficients from HFC DTMF hw-decoder
+ */
+
+u8
+*dsp_dtmf_goertzel_decode(struct dsp *dsp, u8 *data, int len, int fmt)
+{
+	u8 what;
+	int size;
+	signed short *buf;
+	s32 sk, sk1, sk2;
+	int k, n, i;
+	s32 *hfccoeff;
+	s32 result[NCOEFF], tresh, treshl;
+	int lowgroup, highgroup;
+	s64 cos2pik_;
+
+	dsp->dtmf.digits[0] = '\0';
+
+	/* Note: The function will loop until the buffer has not enough samples
+	 * left to decode a full frame.
+	 */
+again:
+	/* convert samples */
+	size = dsp->dtmf.size;
+	buf = dsp->dtmf.buffer;
+	switch (fmt) {
+	case 0: /* alaw */
+	case 1: /* ulaw */
+		while (size < DSP_DTMF_NPOINTS && len) {
+			buf[size++] = dsp_audio_law_to_s32[*data++];
+			len--;
+		}
+		break;
+
+	case 2: /* HFC coefficients */
+	default:
+		if (len < 64) {
+			if (len > 0)
+				printk(KERN_ERR "%s: coefficients have invalid "
+					"size. (is=%d < must=%d)\n",
+					__func__, len, 64);
+			return dsp->dtmf.digits;
+		}
+		hfccoeff = (s32 *)data;
+		for (k = 0; k < NCOEFF; k++) {
+			sk2 = (*hfccoeff++)>>4;
+			sk = (*hfccoeff++)>>4;
+			if (sk > 32767 || sk < -32767 || sk2 > 32767
+			    || sk2 < -32767)
+				printk(KERN_WARNING
+					"DTMF-Detection overflow\n");
+			/* compute |X(k)|**2 */
+			result[k] =
+				 (sk * sk) -
+				 (((cos2pik[k] * sk) >> 15) * sk2) +
+				 (sk2 * sk2);
+		}
+		data += 64;
+		len -= 64;
+		goto coefficients;
+		break;
+	}
+	dsp->dtmf.size = size;
+
+	if (size < DSP_DTMF_NPOINTS)
+		return dsp->dtmf.digits;
+
+	dsp->dtmf.size = 0;
+
+	/* now we have a full buffer of signed long samples - we do goertzel */
+	for (k = 0; k < NCOEFF; k++) {
+		sk = 0;
+		sk1 = 0;
+		sk2 = 0;
+		buf = dsp->dtmf.buffer;
+		cos2pik_ = cos2pik[k];
+		for (n = 0; n < DSP_DTMF_NPOINTS; n++) {
+			sk = ((cos2pik_*sk1)>>15) - sk2 + (*buf++);
+			sk2 = sk1;
+			sk1 = sk;
+		}
+		sk >>= 8;
+		sk2 >>= 8;
+		if (sk > 32767 || sk < -32767 || sk2 > 32767 || sk2 < -32767)
+			printk(KERN_WARNING "DTMF-Detection overflow\n");
+		/* compute |X(k)|**2 */
+		result[k] =
+			(sk * sk) -
+			(((cos2pik[k] * sk) >> 15) * sk2) +
+			(sk2 * sk2);
+	}
+
+	/* our (squared) coefficients have been calculated, we need to process
+	 * them.
+	 */
+coefficients:
+	tresh = 0;
+	for (i = 0; i < NCOEFF; i++) {
+		if (result[i] < 0)
+			result[i] = 0;
+		if (result[i] > dsp->dtmf.treshold) {
+			if (result[i] > tresh)
+				tresh = result[i];
+		}
+	}
+
+	if (tresh == 0) {
+		what = 0;
+		goto storedigit;
+	}
+
+	if (dsp_debug & DEBUG_DSP_DTMFCOEFF)
+		printk(KERN_DEBUG "a %3d %3d %3d %3d %3d %3d %3d %3d"
+			" tr:%3d r %3d %3d %3d %3d %3d %3d %3d %3d\n",
+			result[0]/10000, result[1]/10000, result[2]/10000,
+			result[3]/10000, result[4]/10000, result[5]/10000,
+			result[6]/10000, result[7]/10000, tresh/10000,
+			result[0]/(tresh/100), result[1]/(tresh/100),
+			result[2]/(tresh/100), result[3]/(tresh/100),
+			result[4]/(tresh/100), result[5]/(tresh/100),
+			result[6]/(tresh/100), result[7]/(tresh/100));
+
+	/* calc digit (lowgroup/highgroup) */
+	lowgroup = -1;
+	highgroup = -1;
+	treshl = tresh >> 3;  /* tones which are not on, must be below 9 dB */
+	tresh = tresh >> 2;  /* touchtones must match within 6 dB */
+	for (i = 0; i < NCOEFF; i++) {
+		if (result[i] < treshl)
+			continue;  /* ignore */
+		if (result[i] < tresh) {
+			lowgroup = -1;
+			highgroup = -1;
+			break;  /* noise inbetween */
+		}
+		/* good level found. This is allowed only one time per group */
+		if (i < NCOEFF/2) {
+			/* lowgroup */
+			if (lowgroup >= 0) {
+				/* Bad. Another tone found. */
+				lowgroup = -1;
+				break;
+			} else
+				lowgroup = i;
+		} else {
+			/* higroup */
+			if (highgroup >= 0) {
+				/* Bad. Another tone found. */
+				highgroup = -1;
+				break;
+			} else
+				highgroup = i-(NCOEFF/2);
+		}
+	}
+
+	/* get digit or null */
+	what = 0;
+	if (lowgroup >= 0 && highgroup >= 0)
+		what = dtmf_matrix[lowgroup][highgroup];
+
+storedigit:
+	if (what && (dsp_debug & DEBUG_DSP_DTMF))
+		printk(KERN_DEBUG "DTMF what: %c\n", what);
+
+	if (dsp->dtmf.lastwhat != what)
+		dsp->dtmf.count = 0;
+
+	/* the tone (or no tone) must remain 3 times without change */
+	if (dsp->dtmf.count == 2) {
+		if (dsp->dtmf.lastdigit != what) {
+			dsp->dtmf.lastdigit = what;
+			if (what) {
+				if (dsp_debug & DEBUG_DSP_DTMF)
+					printk(KERN_DEBUG "DTMF digit: %c\n",
+						what);
+				if ((strlen(dsp->dtmf.digits)+1)
+					< sizeof(dsp->dtmf.digits)) {
+					dsp->dtmf.digits[strlen(
+						dsp->dtmf.digits)+1] = '\0';
+					dsp->dtmf.digits[strlen(
+						dsp->dtmf.digits)] = what;
+				}
+			}
+		}
+	} else
+		dsp->dtmf.count++;
+
+	dsp->dtmf.lastwhat = what;
+
+	goto again;
+}
+
+
diff --git a/drivers/isdn/mISDN/dsp_ecdis.h b/drivers/isdn/mISDN/dsp_ecdis.h
new file mode 100644
index 000000000000..8a20af43308b
--- /dev/null
+++ b/drivers/isdn/mISDN/dsp_ecdis.h
@@ -0,0 +1,110 @@
+/*
+ * SpanDSP - a series of DSP components for telephony
+ *
+ * ec_disable_detector.h - A detector which should eventually meet the
+ *                         G.164/G.165 requirements for detecting the
+ *                         2100Hz echo cancellor disable tone.
+ *
+ * Written by Steve Underwood <steveu@coppice.org>
+ *
+ * Copyright (C) 2001 Steve Underwood
+ *
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ */
+
+#include "dsp_biquad.h"
+
+struct ec_disable_detector_state {
+	struct biquad2_state notch;
+	int notch_level;
+	int channel_level;
+	int tone_present;
+	int tone_cycle_duration;
+	int good_cycles;
+	int hit;
+};
+
+
+#define FALSE 0
+#define TRUE (!FALSE)
+
+static inline void
+echo_can_disable_detector_init(struct ec_disable_detector_state *det)
+{
+    /* Elliptic notch */
+    /* This is actually centred at 2095Hz, but gets the balance we want, due
+       to the asymmetric walls of the notch */
+	biquad2_init(&det->notch,
+		(int32_t) (-0.7600000*32768.0),
+		(int32_t) (-0.1183852*32768.0),
+		(int32_t) (-0.5104039*32768.0),
+		(int32_t) (0.1567596*32768.0),
+		(int32_t) (1.0000000*32768.0));
+
+	det->channel_level = 0;
+	det->notch_level = 0;
+	det->tone_present = FALSE;
+	det->tone_cycle_duration = 0;
+	det->good_cycles = 0;
+	det->hit = 0;
+}
+/*- End of function --------------------------------------------------------*/
+
+static inline int
+echo_can_disable_detector_update(struct ec_disable_detector_state *det,
+int16_t amp)
+{
+	int16_t notched;
+
+	notched = biquad2(&det->notch, amp);
+	/* Estimate the overall energy in the channel, and the energy in
+	   the notch (i.e. overall channel energy - tone energy => noise).
+	   Use abs instead of multiply for speed (is it really faster?).
+	   Damp the overall energy a little more for a stable result.
+	   Damp the notch energy a little less, so we don't damp out the
+	   blip every time the phase reverses */
+	det->channel_level += ((abs(amp) - det->channel_level) >> 5);
+	det->notch_level += ((abs(notched) - det->notch_level) >> 4);
+	if (det->channel_level > 280) {
+		/* There is adequate energy in the channel.
+		 Is it mostly at 2100Hz? */
+		if (det->notch_level*6 < det->channel_level) {
+			/* The notch says yes, so we have the tone. */
+			if (!det->tone_present) {
+				/* Do we get a kick every 450+-25ms? */
+				if (det->tone_cycle_duration >= 425*8
+					&& det->tone_cycle_duration <= 475*8) {
+					det->good_cycles++;
+					if (det->good_cycles > 2)
+					det->hit = TRUE;
+				}
+				det->tone_cycle_duration = 0;
+			}
+			det->tone_present = TRUE;
+		} else
+			det->tone_present = FALSE;
+		det->tone_cycle_duration++;
+	} else {
+		det->tone_present = FALSE;
+		det->tone_cycle_duration = 0;
+		det->good_cycles = 0;
+	}
+	return det->hit;
+}
+/*- End of function --------------------------------------------------------*/
+/*- End of file ------------------------------------------------------------*/
diff --git a/drivers/isdn/mISDN/dsp_hwec.c b/drivers/isdn/mISDN/dsp_hwec.c
new file mode 100644
index 000000000000..eb892d9dd5c6
--- /dev/null
+++ b/drivers/isdn/mISDN/dsp_hwec.c
@@ -0,0 +1,138 @@
+/*
+ * dsp_hwec.c:
+ * builtin mISDN dsp pipeline element for enabling the hw echocanceller
+ *
+ * Copyright (C) 2007, Nadi Sarrar
+ *
+ * Nadi Sarrar <nadi@beronet.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the Free
+ * Software Foundation; either version 2 of the License, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc., 59
+ * Temple Place - Suite 330, Boston, MA  02111-1307, USA.
+ *
+ * The full GNU General Public License is included in this distribution in the
+ * file called LICENSE.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/string.h>
+#include <linux/mISDNdsp.h>
+#include <linux/mISDNif.h>
+#include "core.h"
+#include "dsp.h"
+#include "dsp_hwec.h"
+
+static struct mISDN_dsp_element_arg args[] = {
+	{ "deftaps", "128", "Set the number of taps of cancellation." },
+};
+
+static struct mISDN_dsp_element dsp_hwec_p = {
+	.name = "hwec",
+	.new = NULL,
+	.free = NULL,
+	.process_tx = NULL,
+	.process_rx = NULL,
+	.num_args = sizeof(args) / sizeof(struct mISDN_dsp_element_arg),
+	.args = args,
+};
+struct mISDN_dsp_element *dsp_hwec = &dsp_hwec_p;
+
+void dsp_hwec_enable(struct dsp *dsp, const char *arg)
+{
+	int deftaps = 128,
+		len;
+	struct mISDN_ctrl_req	cq;
+
+	if (!dsp) {
+		printk(KERN_ERR "%s: failed to enable hwec: dsp is NULL\n",
+			__func__);
+		return;
+	}
+
+	if (!arg)
+		goto _do;
+
+	len = strlen(arg);
+	if (!len)
+		goto _do;
+
+	{
+		char _dup[len + 1];
+		char *dup, *tok, *name, *val;
+		int tmp;
+
+		strcpy(_dup, arg);
+		dup = _dup;
+
+		while ((tok = strsep(&dup, ","))) {
+			if (!strlen(tok))
+				continue;
+			name = strsep(&tok, "=");
+			val = tok;
+
+			if (!val)
+				continue;
+
+			if (!strcmp(name, "deftaps")) {
+				if (sscanf(val, "%d", &tmp) == 1)
+					deftaps = tmp;
+			}
+		}
+	}
+
+_do:
+	printk(KERN_DEBUG "%s: enabling hwec with deftaps=%d\n",
+		__func__, deftaps);
+	memset(&cq, 0, sizeof(cq));
+	cq.op = MISDN_CTRL_HFC_ECHOCAN_ON;
+	cq.p1 = deftaps;
+	if (!dsp->ch.peer->ctrl(&dsp->ch, CONTROL_CHANNEL, &cq)) {
+		printk(KERN_DEBUG "%s: CONTROL_CHANNEL failed\n",
+			__func__);
+		return;
+	}
+}
+
+void dsp_hwec_disable(struct dsp *dsp)
+{
+	struct mISDN_ctrl_req	cq;
+
+	if (!dsp) {
+		printk(KERN_ERR "%s: failed to disable hwec: dsp is NULL\n",
+			__func__);
+		return;
+	}
+
+	printk(KERN_DEBUG "%s: disabling hwec\n", __func__);
+	memset(&cq, 0, sizeof(cq));
+	cq.op = MISDN_CTRL_HFC_ECHOCAN_OFF;
+	if (!dsp->ch.peer->ctrl(&dsp->ch, CONTROL_CHANNEL, &cq)) {
+		printk(KERN_DEBUG "%s: CONTROL_CHANNEL failed\n",
+			__func__);
+		return;
+	}
+}
+
+int dsp_hwec_init(void)
+{
+	mISDN_dsp_element_register(dsp_hwec);
+
+	return 0;
+}
+
+void dsp_hwec_exit(void)
+{
+	mISDN_dsp_element_unregister(dsp_hwec);
+}
+
diff --git a/drivers/isdn/mISDN/dsp_hwec.h b/drivers/isdn/mISDN/dsp_hwec.h
new file mode 100644
index 000000000000..eebe80c3f713
--- /dev/null
+++ b/drivers/isdn/mISDN/dsp_hwec.h
@@ -0,0 +1,10 @@
+/*
+ * dsp_hwec.h
+ */
+
+extern struct mISDN_dsp_element *dsp_hwec;
+extern void dsp_hwec_enable(struct dsp *dsp, const char *arg);
+extern void dsp_hwec_disable(struct dsp *dsp);
+extern int  dsp_hwec_init(void);
+extern void dsp_hwec_exit(void);
+
diff --git a/drivers/isdn/mISDN/dsp_pipeline.c b/drivers/isdn/mISDN/dsp_pipeline.c
new file mode 100644
index 000000000000..850260ab57d0
--- /dev/null
+++ b/drivers/isdn/mISDN/dsp_pipeline.c
@@ -0,0 +1,348 @@
+/*
+ * dsp_pipeline.c: pipelined audio processing
+ *
+ * Copyright (C) 2007, Nadi Sarrar
+ *
+ * Nadi Sarrar <nadi@beronet.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the Free
+ * Software Foundation; either version 2 of the License, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc., 59
+ * Temple Place - Suite 330, Boston, MA  02111-1307, USA.
+ *
+ * The full GNU General Public License is included in this distribution in the
+ * file called LICENSE.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/list.h>
+#include <linux/string.h>
+#include <linux/mISDNif.h>
+#include <linux/mISDNdsp.h>
+#include "dsp.h"
+#include "dsp_hwec.h"
+
+/* uncomment for debugging */
+/*#define PIPELINE_DEBUG*/
+
+struct dsp_pipeline_entry {
+	struct mISDN_dsp_element *elem;
+	void                *p;
+	struct list_head     list;
+};
+struct dsp_element_entry {
+	struct mISDN_dsp_element *elem;
+	struct device	     dev;
+	struct list_head     list;
+};
+
+static LIST_HEAD(dsp_elements);
+
+/* sysfs */
+static struct class *elements_class;
+
+static ssize_t
+attr_show_args(struct device *dev, struct device_attribute *attr, char *buf)
+{
+	struct mISDN_dsp_element *elem = dev_get_drvdata(dev);
+	ssize_t len = 0;
+	int i = 0;
+
+	*buf = 0;
+	for (; i < elem->num_args; ++i)
+		len = sprintf(buf, "%sName:        %s\n%s%s%sDescription: %s\n"
+			"\n", buf,
+			  elem->args[i].name,
+			  elem->args[i].def ? "Default:     " : "",
+			  elem->args[i].def ? elem->args[i].def : "",
+			  elem->args[i].def ? "\n" : "",
+			  elem->args[i].desc);
+
+	return len;
+}
+
+static struct device_attribute element_attributes[] = {
+	__ATTR(args, 0444, attr_show_args, NULL),
+};
+
+int mISDN_dsp_element_register(struct mISDN_dsp_element *elem)
+{
+	struct dsp_element_entry *entry;
+	int ret, i;
+
+	if (!elem)
+		return -EINVAL;
+
+	entry = kzalloc(sizeof(struct dsp_element_entry), GFP_KERNEL);
+	if (!entry)
+		return -ENOMEM;
+
+	entry->elem = elem;
+
+	entry->dev.class = elements_class;
+	dev_set_drvdata(&entry->dev, elem);
+	snprintf(entry->dev.bus_id, BUS_ID_SIZE, elem->name);
+	ret = device_register(&entry->dev);
+	if (ret) {
+		printk(KERN_ERR "%s: failed to register %s\n",
+			__func__, elem->name);
+		goto err1;
+	}
+
+	for (i = 0; i < (sizeof(element_attributes)
+		/ sizeof(struct device_attribute)); ++i)
+		ret = device_create_file(&entry->dev,
+				&element_attributes[i]);
+		if (ret) {
+			printk(KERN_ERR "%s: failed to create device file\n",
+				__func__);
+			goto err2;
+		}
+
+	list_add_tail(&entry->list, &dsp_elements);
+
+	printk(KERN_DEBUG "%s: %s registered\n", __func__, elem->name);
+
+	return 0;
+
+err2:
+	device_unregister(&entry->dev);
+err1:
+	kfree(entry);
+	return ret;
+}
+EXPORT_SYMBOL(mISDN_dsp_element_register);
+
+void mISDN_dsp_element_unregister(struct mISDN_dsp_element *elem)
+{
+	struct dsp_element_entry *entry, *n;
+
+	if (!elem)
+		return;
+
+	list_for_each_entry_safe(entry, n, &dsp_elements, list)
+		if (entry->elem == elem) {
+			list_del(&entry->list);
+			device_unregister(&entry->dev);
+			kfree(entry);
+			printk(KERN_DEBUG "%s: %s unregistered\n",
+				__func__, elem->name);
+			return;
+		}
+	printk(KERN_ERR "%s: element %s not in list.\n", __func__, elem->name);
+}
+EXPORT_SYMBOL(mISDN_dsp_element_unregister);
+
+int dsp_pipeline_module_init(void)
+{
+	elements_class = class_create(THIS_MODULE, "dsp_pipeline");
+	if (IS_ERR(elements_class))
+		return PTR_ERR(elements_class);
+
+#ifdef PIPELINE_DEBUG
+	printk(KERN_DEBUG "%s: dsp pipeline module initialized\n", __func__);
+#endif
+
+	dsp_hwec_init();
+
+	return 0;
+}
+
+void dsp_pipeline_module_exit(void)
+{
+	struct dsp_element_entry *entry, *n;
+
+	dsp_hwec_exit();
+
+	class_destroy(elements_class);
+
+	list_for_each_entry_safe(entry, n, &dsp_elements, list) {
+		list_del(&entry->list);
+		printk(KERN_WARNING "%s: element was still registered: %s\n",
+			__func__, entry->elem->name);
+		kfree(entry);
+	}
+
+	printk(KERN_DEBUG "%s: dsp pipeline module exited\n", __func__);
+}
+
+int dsp_pipeline_init(struct dsp_pipeline *pipeline)
+{
+	if (!pipeline)
+		return -EINVAL;
+
+	INIT_LIST_HEAD(&pipeline->list);
+
+#ifdef PIPELINE_DEBUG
+	printk(KERN_DEBUG "%s: dsp pipeline ready\n", __func__);
+#endif
+
+	return 0;
+}
+
+static inline void _dsp_pipeline_destroy(struct dsp_pipeline *pipeline)
+{
+	struct dsp_pipeline_entry *entry, *n;
+
+	list_for_each_entry_safe(entry, n, &pipeline->list, list) {
+		list_del(&entry->list);
+		if (entry->elem == dsp_hwec)
+			dsp_hwec_disable(container_of(pipeline, struct dsp,
+				pipeline));
+		else
+			entry->elem->free(entry->p);
+		kfree(entry);
+	}
+}
+
+void dsp_pipeline_destroy(struct dsp_pipeline *pipeline)
+{
+
+	if (!pipeline)
+		return;
+
+	_dsp_pipeline_destroy(pipeline);
+
+#ifdef PIPELINE_DEBUG
+	printk(KERN_DEBUG "%s: dsp pipeline destroyed\n", __func__);
+#endif
+}
+
+int dsp_pipeline_build(struct dsp_pipeline *pipeline, const char *cfg)
+{
+	int len, incomplete = 0, found = 0;
+	char *dup, *tok, *name, *args;
+	struct dsp_element_entry *entry, *n;
+	struct dsp_pipeline_entry *pipeline_entry;
+	struct mISDN_dsp_element *elem;
+
+	if (!pipeline)
+		return -EINVAL;
+
+	if (!list_empty(&pipeline->list))
+		_dsp_pipeline_destroy(pipeline);
+
+	if (!cfg)
+		return 0;
+
+	len = strlen(cfg);
+	if (!len)
+		return 0;
+
+	dup = kmalloc(len + 1, GFP_KERNEL);
+	if (!dup)
+		return 0;
+	strcpy(dup, cfg);
+	while ((tok = strsep(&dup, "|"))) {
+		if (!strlen(tok))
+			continue;
+		name = strsep(&tok, "(");
+		args = strsep(&tok, ")");
+		if (args && !*args)
+			args = 0;
+
+		list_for_each_entry_safe(entry, n, &dsp_elements, list)
+			if (!strcmp(entry->elem->name, name)) {
+				elem = entry->elem;
+
+				pipeline_entry = kmalloc(sizeof(struct
+					dsp_pipeline_entry), GFP_KERNEL);
+				if (!pipeline_entry) {
+					printk(KERN_DEBUG "%s: failed to add "
+					    "entry to pipeline: %s (out of "
+					    "memory)\n", __func__, elem->name);
+					incomplete = 1;
+					goto _out;
+				}
+				pipeline_entry->elem = elem;
+
+				if (elem == dsp_hwec) {
+					/* This is a hack to make the hwec
+					   available as a pipeline module */
+					dsp_hwec_enable(container_of(pipeline,
+						struct dsp, pipeline), args);
+					list_add_tail(&pipeline_entry->list,
+						&pipeline->list);
+				} else {
+					pipeline_entry->p = elem->new(args);
+					if (pipeline_entry->p) {
+						list_add_tail(&pipeline_entry->
+							list, &pipeline->list);
+#ifdef PIPELINE_DEBUG
+						printk(KERN_DEBUG "%s: created "
+						    "instance of %s%s%s\n",
+						    __func__, name, args ?
+						    " with args " : "", args ?
+						    args : "");
+#endif
+					} else {
+						printk(KERN_DEBUG "%s: failed "
+						  "to add entry to pipeline: "
+						  "%s (new() returned NULL)\n",
+						  __func__, elem->name);
+						kfree(pipeline_entry);
+						incomplete = 1;
+					}
+				}
+				found = 1;
+				break;
+			}
+
+		if (found)
+			found = 0;
+		else {
+			printk(KERN_DEBUG "%s: element not found, skipping: "
+				"%s\n", __func__, name);
+			incomplete = 1;
+		}
+	}
+
+_out:
+	if (!list_empty(&pipeline->list))
+		pipeline->inuse = 1;
+	else
+		pipeline->inuse = 0;
+
+#ifdef PIPELINE_DEBUG
+	printk(KERN_DEBUG "%s: dsp pipeline built%s: %s\n",
+		__func__, incomplete ? " incomplete" : "", cfg);
+#endif
+	kfree(dup);
+	return 0;
+}
+
+void dsp_pipeline_process_tx(struct dsp_pipeline *pipeline, u8 *data, int len)
+{
+	struct dsp_pipeline_entry *entry;
+
+	if (!pipeline)
+		return;
+
+	list_for_each_entry(entry, &pipeline->list, list)
+		if (entry->elem->process_tx)
+			entry->elem->process_tx(entry->p, data, len);
+}
+
+void dsp_pipeline_process_rx(struct dsp_pipeline *pipeline, u8 *data, int len)
+{
+	struct dsp_pipeline_entry *entry;
+
+	if (!pipeline)
+		return;
+
+	list_for_each_entry_reverse(entry, &pipeline->list, list)
+		if (entry->elem->process_rx)
+			entry->elem->process_rx(entry->p, data, len);
+}
+
+
diff --git a/drivers/isdn/mISDN/dsp_tones.c b/drivers/isdn/mISDN/dsp_tones.c
new file mode 100644
index 000000000000..23dd0dd21524
--- /dev/null
+++ b/drivers/isdn/mISDN/dsp_tones.c
@@ -0,0 +1,551 @@
+/*
+ * Audio support data for ISDN4Linux.
+ *
+ * Copyright Andreas Eversberg (jolly@eversberg.eu)
+ *
+ * This software may be used and distributed according to the terms
+ * of the GNU General Public License, incorporated herein by reference.
+ *
+ */
+
+#include <linux/mISDNif.h>
+#include <linux/mISDNdsp.h>
+#include "core.h"
+#include "dsp.h"
+
+
+#define DATA_S sample_silence
+#define SIZE_S (&sizeof_silence)
+#define DATA_GA sample_german_all
+#define SIZE_GA (&sizeof_german_all)
+#define DATA_GO sample_german_old
+#define SIZE_GO (&sizeof_german_old)
+#define DATA_DT sample_american_dialtone
+#define SIZE_DT (&sizeof_american_dialtone)
+#define DATA_RI sample_american_ringing
+#define SIZE_RI (&sizeof_american_ringing)
+#define DATA_BU sample_american_busy
+#define SIZE_BU (&sizeof_american_busy)
+#define DATA_S1 sample_special1
+#define SIZE_S1 (&sizeof_special1)
+#define DATA_S2 sample_special2
+#define SIZE_S2 (&sizeof_special2)
+#define DATA_S3 sample_special3
+#define SIZE_S3 (&sizeof_special3)
+
+/***************/
+/* tones loops */
+/***************/
+
+/* all tones are alaw encoded */
+/* the last sample+1 is in phase with the first sample. the error is low */
+
+static u8 sample_german_all[] = {
+	0x80, 0xab, 0x81, 0x6d, 0xfd, 0xdd, 0x5d, 0x9d,
+	0x4d, 0xd1, 0x89, 0x88, 0xd0, 0x4c, 0x9c, 0x5c,
+	0xdc, 0xfc, 0x6c,
+	0x80, 0xab, 0x81, 0x6d, 0xfd, 0xdd, 0x5d, 0x9d,
+	0x4d, 0xd1, 0x89, 0x88, 0xd0, 0x4c, 0x9c, 0x5c,
+	0xdc, 0xfc, 0x6c,
+	0x80, 0xab, 0x81, 0x6d, 0xfd, 0xdd, 0x5d, 0x9d,
+	0x4d, 0xd1, 0x89, 0x88, 0xd0, 0x4c, 0x9c, 0x5c,
+	0xdc, 0xfc, 0x6c,
+	0x80, 0xab, 0x81, 0x6d, 0xfd, 0xdd, 0x5d, 0x9d,
+	0x4d, 0xd1, 0x89, 0x88, 0xd0, 0x4c, 0x9c, 0x5c,
+	0xdc, 0xfc, 0x6c,
+};
+static u32 sizeof_german_all = sizeof(sample_german_all);
+
+static u8 sample_german_old[] = {
+	0xec, 0x68, 0xe1, 0x6d, 0x6d, 0x91, 0x51, 0xed,
+	0x6d, 0x01, 0x1e, 0x10, 0x0c, 0x90, 0x60, 0x70,
+	0x8c,
+	0xec, 0x68, 0xe1, 0x6d, 0x6d, 0x91, 0x51, 0xed,
+	0x6d, 0x01, 0x1e, 0x10, 0x0c, 0x90, 0x60, 0x70,
+	0x8c,
+	0xec, 0x68, 0xe1, 0x6d, 0x6d, 0x91, 0x51, 0xed,
+	0x6d, 0x01, 0x1e, 0x10, 0x0c, 0x90, 0x60, 0x70,
+	0x8c,
+	0xec, 0x68, 0xe1, 0x6d, 0x6d, 0x91, 0x51, 0xed,
+	0x6d, 0x01, 0x1e, 0x10, 0x0c, 0x90, 0x60, 0x70,
+	0x8c,
+};
+static u32 sizeof_german_old = sizeof(sample_german_old);
+
+static u8 sample_american_dialtone[] = {
+	0x2a, 0x18, 0x90, 0x6c, 0x4c, 0xbc, 0x4c, 0x6c,
+	0x10, 0x58, 0x32, 0xb9, 0x31, 0x2d, 0x8d, 0x0d,
+	0x8d, 0x2d, 0x31, 0x99, 0x0f, 0x28, 0x60, 0xf0,
+	0xd0, 0x50, 0xd0, 0x30, 0x60, 0x08, 0x8e, 0x67,
+	0x09, 0x19, 0x21, 0xe1, 0xd9, 0xb9, 0x29, 0x67,
+	0x83, 0x02, 0xce, 0xbe, 0xee, 0x1a, 0x1b, 0xef,
+	0xbf, 0xcf, 0x03, 0x82, 0x66, 0x28, 0xb8, 0xd8,
+	0xe0, 0x20, 0x18, 0x08, 0x66, 0x8f, 0x09, 0x61,
+	0x31, 0xd1, 0x51, 0xd1, 0xf1, 0x61, 0x29, 0x0e,
+	0x98, 0x30, 0x2c, 0x8c, 0x0c, 0x8c, 0x2c, 0x30,
+	0xb8, 0x33, 0x59, 0x11, 0x6d, 0x4d, 0xbd, 0x4d,
+	0x6d, 0x91, 0x19,
+};
+static u32 sizeof_american_dialtone = sizeof(sample_american_dialtone);
+
+static u8 sample_american_ringing[] = {
+	0x2a, 0xe0, 0xac, 0x0c, 0xbc, 0x4c, 0x8c, 0x90,
+	0x48, 0xc7, 0xc1, 0xed, 0xcd, 0x4d, 0xcd, 0xed,
+	0xc1, 0xb7, 0x08, 0x30, 0xec, 0xcc, 0xcc, 0x8c,
+	0x10, 0x58, 0x1a, 0x99, 0x71, 0xed, 0x8d, 0x8d,
+	0x2d, 0x41, 0x89, 0x9e, 0x20, 0x70, 0x2c, 0xec,
+	0x2c, 0x70, 0x20, 0x86, 0x77, 0xe1, 0x31, 0x11,
+	0xd1, 0xf1, 0x81, 0x09, 0xa3, 0x56, 0x58, 0x00,
+	0x40, 0xc0, 0x60, 0x38, 0x46, 0x43, 0x57, 0x39,
+	0xd9, 0x59, 0x99, 0xc9, 0x77, 0x2f, 0x2e, 0xc6,
+	0xd6, 0x28, 0xd6, 0x36, 0x26, 0x2e, 0x8a, 0xa3,
+	0x43, 0x63, 0x4b, 0x4a, 0x62, 0x42, 0xa2, 0x8b,
+	0x2f, 0x27, 0x37, 0xd7, 0x29, 0xd7, 0xc7, 0x2f,
+	0x2e, 0x76, 0xc8, 0x98, 0x58, 0xd8, 0x38, 0x56,
+	0x42, 0x47, 0x39, 0x61, 0xc1, 0x41, 0x01, 0x59,
+	0x57, 0xa2, 0x08, 0x80, 0xf0, 0xd0, 0x10, 0x30,
+	0xe0, 0x76, 0x87, 0x21, 0x71, 0x2d, 0xed, 0x2d,
+	0x71, 0x21, 0x9f, 0x88, 0x40, 0x2c, 0x8c, 0x8c,
+	0xec, 0x70, 0x98, 0x1b, 0x59, 0x11, 0x8d, 0xcd,
+	0xcd, 0xed, 0x31, 0x09, 0xb6, 0xc0, 0xec, 0xcc,
+	0x4c, 0xcc, 0xec, 0xc0, 0xc6, 0x49, 0x91, 0x8d,
+	0x4d, 0xbd, 0x0d, 0xad, 0xe1,
+};
+static u32 sizeof_american_ringing = sizeof(sample_american_ringing);
+
+static u8 sample_american_busy[] = {
+	0x2a, 0x00, 0x6c, 0x4c, 0x4c, 0x6c, 0xb0, 0x66,
+	0x99, 0x11, 0x6d, 0x8d, 0x2d, 0x41, 0xd7, 0x96,
+	0x60, 0xf0, 0x70, 0x40, 0x58, 0xf6, 0x53, 0x57,
+	0x09, 0x89, 0xd7, 0x5f, 0xe3, 0x2a, 0xe3, 0x5f,
+	0xd7, 0x89, 0x09, 0x57, 0x53, 0xf6, 0x58, 0x40,
+	0x70, 0xf0, 0x60, 0x96, 0xd7, 0x41, 0x2d, 0x8d,
+	0x6d, 0x11, 0x99, 0x66, 0xb0, 0x6c, 0x4c, 0x4c,
+	0x6c, 0x00, 0x2a, 0x01, 0x6d, 0x4d, 0x4d, 0x6d,
+	0xb1, 0x67, 0x98, 0x10, 0x6c, 0x8c, 0x2c, 0x40,
+	0xd6, 0x97, 0x61, 0xf1, 0x71, 0x41, 0x59, 0xf7,
+	0x52, 0x56, 0x08, 0x88, 0xd6, 0x5e, 0xe2, 0x2a,
+	0xe2, 0x5e, 0xd6, 0x88, 0x08, 0x56, 0x52, 0xf7,
+	0x59, 0x41, 0x71, 0xf1, 0x61, 0x97, 0xd6, 0x40,
+	0x2c, 0x8c, 0x6c, 0x10, 0x98, 0x67, 0xb1, 0x6d,
+	0x4d, 0x4d, 0x6d, 0x01,
+};
+static u32 sizeof_american_busy = sizeof(sample_american_busy);
+
+static u8 sample_special1[] = {
+	0x2a, 0x2c, 0xbc, 0x6c, 0xd6, 0x71, 0xbd, 0x0d,
+	0xd9, 0x80, 0xcc, 0x4c, 0x40, 0x39, 0x0d, 0xbd,
+	0x11, 0x86, 0xec, 0xbc, 0xec, 0x0e, 0x51, 0xbd,
+	0x8d, 0x89, 0x30, 0x4c, 0xcc, 0xe0, 0xe1, 0xcd,
+	0x4d, 0x31, 0x88, 0x8c, 0xbc, 0x50, 0x0f, 0xed,
+	0xbd, 0xed, 0x87, 0x10, 0xbc, 0x0c, 0x38, 0x41,
+	0x4d, 0xcd, 0x81, 0xd8, 0x0c, 0xbc, 0x70, 0xd7,
+	0x6d, 0xbd, 0x2d,
+};
+static u32 sizeof_special1 = sizeof(sample_special1);
+
+static u8 sample_special2[] = {
+	0x2a, 0xcc, 0x8c, 0xd7, 0x4d, 0x2d, 0x18, 0xbc,
+	0x10, 0xc1, 0xbd, 0xc1, 0x10, 0xbc, 0x18, 0x2d,
+	0x4d, 0xd7, 0x8c, 0xcc, 0x2a, 0xcd, 0x8d, 0xd6,
+	0x4c, 0x2c, 0x19, 0xbd, 0x11, 0xc0, 0xbc, 0xc0,
+	0x11, 0xbd, 0x19, 0x2c, 0x4c, 0xd6, 0x8d, 0xcd,
+	0x2a, 0xcc, 0x8c, 0xd7, 0x4d, 0x2d, 0x18, 0xbc,
+	0x10, 0xc1, 0xbd, 0xc1, 0x10, 0xbc, 0x18, 0x2d,
+	0x4d, 0xd7, 0x8c, 0xcc, 0x2a, 0xcd, 0x8d, 0xd6,
+	0x4c, 0x2c, 0x19, 0xbd, 0x11, 0xc0, 0xbc, 0xc0,
+	0x11, 0xbd, 0x19, 0x2c, 0x4c, 0xd6, 0x8d, 0xcd,
+};
+static u32 sizeof_special2 = sizeof(sample_special2);
+
+static u8 sample_special3[] = {
+	0x2a, 0xbc, 0x18, 0xcd, 0x11, 0x2c, 0x8c, 0xc1,
+	0x4d, 0xd6, 0xbc, 0xd6, 0x4d, 0xc1, 0x8c, 0x2c,
+	0x11, 0xcd, 0x18, 0xbc, 0x2a, 0xbd, 0x19, 0xcc,
+	0x10, 0x2d, 0x8d, 0xc0, 0x4c, 0xd7, 0xbd, 0xd7,
+	0x4c, 0xc0, 0x8d, 0x2d, 0x10, 0xcc, 0x19, 0xbd,
+	0x2a, 0xbc, 0x18, 0xcd, 0x11, 0x2c, 0x8c, 0xc1,
+	0x4d, 0xd6, 0xbc, 0xd6, 0x4d, 0xc1, 0x8c, 0x2c,
+	0x11, 0xcd, 0x18, 0xbc, 0x2a, 0xbd, 0x19, 0xcc,
+	0x10, 0x2d, 0x8d, 0xc0, 0x4c, 0xd7, 0xbd, 0xd7,
+	0x4c, 0xc0, 0x8d, 0x2d, 0x10, 0xcc, 0x19, 0xbd,
+};
+static u32 sizeof_special3 = sizeof(sample_special3);
+
+static u8 sample_silence[] = {
+	0x2a, 0x2a, 0x2a, 0x2a, 0x2a, 0x2a, 0x2a, 0x2a,
+	0x2a, 0x2a, 0x2a, 0x2a, 0x2a, 0x2a, 0x2a, 0x2a,
+	0x2a, 0x2a, 0x2a, 0x2a, 0x2a, 0x2a, 0x2a, 0x2a,
+	0x2a, 0x2a, 0x2a, 0x2a, 0x2a, 0x2a, 0x2a, 0x2a,
+	0x2a, 0x2a, 0x2a, 0x2a, 0x2a, 0x2a, 0x2a, 0x2a,
+	0x2a, 0x2a, 0x2a, 0x2a, 0x2a, 0x2a, 0x2a, 0x2a,
+	0x2a, 0x2a, 0x2a, 0x2a, 0x2a, 0x2a, 0x2a, 0x2a,
+	0x2a, 0x2a, 0x2a, 0x2a, 0x2a, 0x2a, 0x2a, 0x2a,
+	0x2a, 0x2a, 0x2a, 0x2a, 0x2a, 0x2a, 0x2a, 0x2a,
+	0x2a, 0x2a, 0x2a, 0x2a, 0x2a, 0x2a, 0x2a, 0x2a,
+	0x2a, 0x2a, 0x2a, 0x2a, 0x2a, 0x2a, 0x2a, 0x2a,
+	0x2a, 0x2a, 0x2a, 0x2a, 0x2a, 0x2a, 0x2a, 0x2a,
+};
+static u32 sizeof_silence = sizeof(sample_silence);
+
+struct tones_samples {
+	u32 *len;
+	u8 *data;
+};
+static struct
+tones_samples samples[] = {
+	{&sizeof_german_all, sample_german_all},
+	{&sizeof_german_old, sample_german_old},
+	{&sizeof_american_dialtone, sample_american_dialtone},
+	{&sizeof_american_ringing, sample_american_ringing},
+	{&sizeof_american_busy, sample_american_busy},
+	{&sizeof_special1, sample_special1},
+	{&sizeof_special2, sample_special2},
+	{&sizeof_special3, sample_special3},
+	{NULL, NULL},
+};
+
+/***********************************
+ * generate ulaw from alaw samples *
+ ***********************************/
+
+void
+dsp_audio_generate_ulaw_samples(void)
+{
+	int i, j;
+
+	i = 0;
+	while (samples[i].len) {
+		j = 0;
+		while (j < (*samples[i].len)) {
+			samples[i].data[j] =
+				dsp_audio_alaw_to_ulaw[samples[i].data[j]];
+			j++;
+		}
+		i++;
+	}
+}
+
+
+/****************************
+ * tone sequence definition *
+ ****************************/
+
+struct pattern {
+	int tone;
+	u8 *data[10];
+	u32 *siz[10];
+	u32 seq[10];
+} pattern[] = {
+	{TONE_GERMAN_DIALTONE,
+	{DATA_GA, 0, 0, 0, 0, 0, 0, 0, 0, 0},
+	{SIZE_GA, 0, 0, 0, 0, 0, 0, 0, 0, 0},
+	{1900, 0, 0, 0, 0, 0, 0, 0, 0, 0} },
+
+	{TONE_GERMAN_OLDDIALTONE,
+	{DATA_GO, 0, 0, 0, 0, 0, 0, 0, 0, 0},
+	{SIZE_GO, 0, 0, 0, 0, 0, 0, 0, 0, 0},
+	{1998, 0, 0, 0, 0, 0, 0, 0, 0, 0} },
+
+	{TONE_AMERICAN_DIALTONE,
+	{DATA_DT, 0, 0, 0, 0, 0, 0, 0, 0, 0},
+	{SIZE_DT, 0, 0, 0, 0, 0, 0, 0, 0, 0},
+	{8000, 0, 0, 0, 0, 0, 0, 0, 0, 0} },
+
+	{TONE_GERMAN_DIALPBX,
+	{DATA_GA, DATA_S, DATA_GA, DATA_S, DATA_GA, DATA_S, 0, 0, 0, 0},
+	{SIZE_GA, SIZE_S, SIZE_GA, SIZE_S, SIZE_GA, SIZE_S, 0, 0, 0, 0},
+	{2000, 2000, 2000, 2000, 2000, 12000, 0, 0, 0, 0} },
+
+	{TONE_GERMAN_OLDDIALPBX,
+	{DATA_GO, DATA_S, DATA_GO, DATA_S, DATA_GO, DATA_S, 0, 0, 0, 0},
+	{SIZE_GO, SIZE_S, SIZE_GO, SIZE_S, SIZE_GO, SIZE_S, 0, 0, 0, 0},
+	{2000, 2000, 2000, 2000, 2000, 12000, 0, 0, 0, 0} },
+
+	{TONE_AMERICAN_DIALPBX,
+	{DATA_DT, DATA_S, DATA_DT, DATA_S, DATA_DT, DATA_S, 0, 0, 0, 0},
+	{SIZE_DT, SIZE_S, SIZE_DT, SIZE_S, SIZE_DT, SIZE_S, 0, 0, 0, 0},
+	{2000, 2000, 2000, 2000, 2000, 12000, 0, 0, 0, 0} },
+
+	{TONE_GERMAN_RINGING,
+	{DATA_GA, DATA_S, 0, 0, 0, 0, 0, 0, 0, 0},
+	{SIZE_GA, SIZE_S, 0, 0, 0, 0, 0, 0, 0, 0},
+	{8000, 32000, 0, 0, 0, 0, 0, 0, 0, 0} },
+
+	{TONE_GERMAN_OLDRINGING,
+	{DATA_GO, DATA_S, 0, 0, 0, 0, 0, 0, 0, 0},
+	{SIZE_GO, SIZE_S, 0, 0, 0, 0, 0, 0, 0, 0},
+	{8000, 40000, 0, 0, 0, 0, 0, 0, 0, 0} },
+
+	{TONE_AMERICAN_RINGING,
+	{DATA_RI, DATA_S, 0, 0, 0, 0, 0, 0, 0, 0},
+	{SIZE_RI, SIZE_S, 0, 0, 0, 0, 0, 0, 0, 0},
+	{8000, 32000, 0, 0, 0, 0, 0, 0, 0, 0} },
+
+	{TONE_GERMAN_RINGPBX,
+	{DATA_GA, DATA_S, DATA_GA, DATA_S, 0, 0, 0, 0, 0, 0},
+	{SIZE_GA, SIZE_S, SIZE_GA, SIZE_S, 0, 0, 0, 0, 0, 0},
+	{4000, 4000, 4000, 28000, 0, 0, 0, 0, 0, 0} },
+
+	{TONE_GERMAN_OLDRINGPBX,
+	{DATA_GO, DATA_S, DATA_GO, DATA_S, 0, 0, 0, 0, 0, 0},
+	{SIZE_GO, SIZE_S, SIZE_GO, SIZE_S, 0, 0, 0, 0, 0, 0},
+	{4000, 4000, 4000, 28000, 0, 0, 0, 0, 0, 0} },
+
+	{TONE_AMERICAN_RINGPBX,
+	{DATA_RI, DATA_S, DATA_RI, DATA_S, 0, 0, 0, 0, 0, 0},
+	{SIZE_RI, SIZE_S, SIZE_RI, SIZE_S, 0, 0, 0, 0, 0, 0},
+	{4000, 4000, 4000, 28000, 0, 0, 0, 0, 0, 0} },
+
+	{TONE_GERMAN_BUSY,
+	{DATA_GA, DATA_S, 0, 0, 0, 0, 0, 0, 0, 0},
+	{SIZE_GA, SIZE_S, 0, 0, 0, 0, 0, 0, 0, 0},
+	{4000, 4000, 0, 0, 0, 0, 0, 0, 0, 0} },
+
+	{TONE_GERMAN_OLDBUSY,
+	{DATA_GO, DATA_S, 0, 0, 0, 0, 0, 0, 0, 0},
+	{SIZE_GO, SIZE_S, 0, 0, 0, 0, 0, 0, 0, 0},
+	{1000, 5000, 0, 0, 0, 0, 0, 0, 0, 0} },
+
+	{TONE_AMERICAN_BUSY,
+	{DATA_BU, DATA_S, 0, 0, 0, 0, 0, 0, 0, 0},
+	{SIZE_BU, SIZE_S, 0, 0, 0, 0, 0, 0, 0, 0},
+	{4000, 4000, 0, 0, 0, 0, 0, 0, 0, 0} },
+
+	{TONE_GERMAN_HANGUP,
+	{DATA_GA, DATA_S, 0, 0, 0, 0, 0, 0, 0, 0},
+	{SIZE_GA, SIZE_S, 0, 0, 0, 0, 0, 0, 0, 0},
+	{4000, 4000, 0, 0, 0, 0, 0, 0, 0, 0} },
+
+	{TONE_GERMAN_OLDHANGUP,
+	{DATA_GO, DATA_S, 0, 0, 0, 0, 0, 0, 0, 0},
+	{SIZE_GO, SIZE_S, 0, 0, 0, 0, 0, 0, 0, 0},
+	{1000, 5000, 0, 0, 0, 0, 0, 0, 0, 0} },
+
+	{TONE_AMERICAN_HANGUP,
+	{DATA_DT, 0, 0, 0, 0, 0, 0, 0, 0, 0},
+	{SIZE_DT, 0, 0, 0, 0, 0, 0, 0, 0, 0},
+	{8000, 0, 0, 0, 0, 0, 0, 0, 0, 0} },
+
+	{TONE_SPECIAL_INFO,
+	{DATA_S1, DATA_S2, DATA_S3, DATA_S, 0, 0, 0, 0, 0, 0},
+	{SIZE_S1, SIZE_S2, SIZE_S3, SIZE_S, 0, 0, 0, 0, 0, 0},
+	{2666, 2666, 2666, 8002, 0, 0, 0, 0, 0, 0} },
+
+	{TONE_GERMAN_GASSENBESETZT,
+	{DATA_GA, DATA_S, 0, 0, 0, 0, 0, 0, 0, 0},
+	{SIZE_GA, SIZE_S, 0, 0, 0, 0, 0, 0, 0, 0},
+	{2000, 2000, 0, 0, 0, 0, 0, 0, 0, 0} },
+
+	{TONE_GERMAN_AUFSCHALTTON,
+	{DATA_GO, DATA_S, DATA_GO, DATA_S, 0, 0, 0, 0, 0, 0},
+	{SIZE_GO, SIZE_S, SIZE_GO, SIZE_S, 0, 0, 0, 0, 0, 0},
+	{1000, 5000, 1000, 17000, 0, 0, 0, 0, 0, 0} },
+
+	{0,
+	{0, 0, 0, 0, 0, 0, 0, 0, 0, 0},
+	{0, 0, 0, 0, 0, 0, 0, 0, 0, 0},
+	{0, 0, 0, 0, 0, 0, 0, 0, 0, 0} },
+};
+
+/******************
+ * copy tone data *
+ ******************/
+
+/* an sk_buff is generated from the number of samples needed.
+ * the count will be changed and may begin from 0 each pattern period.
+ * the clue is to precalculate the pointers and legths to use only one
+ * memcpy per function call, or two memcpy if the tone sequence changes.
+ *
+ * pattern - the type of the pattern
+ * count - the sample from the beginning of the pattern (phase)
+ * len - the number of bytes
+ *
+ * return - the sk_buff with the sample
+ *
+ * if tones has finished (e.g. knocking tone), dsp->tones is turned off
+ */
+void dsp_tone_copy(struct dsp *dsp, u8 *data, int len)
+{
+	int index, count, start, num;
+	struct pattern *pat;
+	struct dsp_tone *tone = &dsp->tone;
+
+	/* if we have no tone, we copy silence */
+	if (!tone->tone) {
+		memset(data, dsp_silence, len);
+		return;
+	}
+
+	/* process pattern */
+	pat = (struct pattern *)tone->pattern;
+		/* points to the current pattern */
+	index = tone->index; /* gives current sequence index */
+	count = tone->count; /* gives current sample */
+
+	/* copy sample */
+	while (len) {
+		/* find sample to start with */
+		while (42) {
+			/* warp arround */
+			if (!pat->seq[index]) {
+				count = 0;
+				index = 0;
+			}
+			/* check if we are currently playing this tone */
+			if (count < pat->seq[index])
+				break;
+			if (dsp_debug & DEBUG_DSP_TONE)
+				printk(KERN_DEBUG "%s: reaching next sequence "
+					"(index=%d)\n", __func__, index);
+			count -= pat->seq[index];
+			index++;
+		}
+		/* calculate start and number of samples */
+		start = count % (*(pat->siz[index]));
+		num = len;
+		if (num+count > pat->seq[index])
+			num = pat->seq[index] - count;
+		if (num+start > (*(pat->siz[index])))
+			num = (*(pat->siz[index])) - start;
+		/* copy memory */
+		memcpy(data, pat->data[index]+start, num);
+		/* reduce length */
+		data += num;
+		count += num;
+		len -= num;
+	}
+	tone->index = index;
+	tone->count = count;
+
+	/* return sk_buff */
+	return;
+}
+
+
+/*******************************
+ * send HW message to hfc card *
+ *******************************/
+
+static void
+dsp_tone_hw_message(struct dsp *dsp, u8 *sample, int len)
+{
+	struct sk_buff *nskb;
+
+	/* unlocking is not required, because we don't expect a response */
+	nskb = _alloc_mISDN_skb(PH_CONTROL_REQ,
+		(len)?HFC_SPL_LOOP_ON:HFC_SPL_LOOP_OFF, len, sample,
+		GFP_ATOMIC);
+	if (nskb) {
+		if (dsp->ch.peer) {
+			if (dsp->ch.recv(dsp->ch.peer, nskb))
+				dev_kfree_skb(nskb);
+		} else
+			dev_kfree_skb(nskb);
+	}
+}
+
+
+/*****************
+ * timer expires *
+ *****************/
+void
+dsp_tone_timeout(void *arg)
+{
+	struct dsp *dsp = arg;
+	struct dsp_tone *tone = &dsp->tone;
+	struct pattern *pat = (struct pattern *)tone->pattern;
+	int index = tone->index;
+
+	if (!tone->tone)
+		return;
+
+	index++;
+	if (!pat->seq[index])
+		index = 0;
+	tone->index = index;
+
+	/* set next tone */
+	if (pat->data[index] == DATA_S)
+		dsp_tone_hw_message(dsp, 0, 0);
+	else
+		dsp_tone_hw_message(dsp, pat->data[index], *(pat->siz[index]));
+	/* set timer */
+	init_timer(&tone->tl);
+	tone->tl.expires = jiffies + (pat->seq[index] * HZ) / 8000;
+	add_timer(&tone->tl);
+}
+
+
+/********************
+ * set/release tone *
+ ********************/
+
+/*
+ * tones are relaized by streaming or by special loop commands if supported
+ * by hardware. when hardware is used, the patterns will be controlled by
+ * timers.
+ */
+int
+dsp_tone(struct dsp *dsp, int tone)
+{
+	struct pattern *pat;
+	int i;
+	struct dsp_tone *tonet = &dsp->tone;
+
+	tonet->software = 0;
+	tonet->hardware = 0;
+
+	/* we turn off the tone */
+	if (!tone) {
+		if (dsp->features.hfc_loops)
+		if (timer_pending(&tonet->tl))
+			del_timer(&tonet->tl);
+		if (dsp->features.hfc_loops)
+			dsp_tone_hw_message(dsp, NULL, 0);
+		tonet->tone = 0;
+		return 0;
+	}
+
+	pat = NULL;
+	i = 0;
+	while (pattern[i].tone) {
+		if (pattern[i].tone == tone) {
+			pat = &pattern[i];
+			break;
+		}
+		i++;
+	}
+	if (!pat) {
+		printk(KERN_WARNING "dsp: given tone 0x%x is invalid\n", tone);
+		return -EINVAL;
+	}
+	if (dsp_debug & DEBUG_DSP_TONE)
+		printk(KERN_DEBUG "%s: now starting tone %d (index=%d)\n",
+			__func__, tone, 0);
+	tonet->tone = tone;
+	tonet->pattern = pat;
+	tonet->index = 0;
+	tonet->count = 0;
+
+	if (dsp->features.hfc_loops) {
+		tonet->hardware = 1;
+		/* set first tone */
+		dsp_tone_hw_message(dsp, pat->data[0], *(pat->siz[0]));
+		/* set timer */
+		if (timer_pending(&tonet->tl))
+			del_timer(&tonet->tl);
+		init_timer(&tonet->tl);
+		tonet->tl.expires = jiffies + (pat->seq[0] * HZ) / 8000;
+		add_timer(&tonet->tl);
+	} else {
+		tonet->software = 1;
+	}
+
+	return 0;
+}
+
+
+
+
+
diff --git a/drivers/isdn/mISDN/fsm.c b/drivers/isdn/mISDN/fsm.c
new file mode 100644
index 000000000000..b5d6553f2dc8
--- /dev/null
+++ b/drivers/isdn/mISDN/fsm.c
@@ -0,0 +1,183 @@
+/*
+ * finite state machine implementation
+ *
+ * Author       Karsten Keil <kkeil@novell.com>
+ *
+ * Thanks to    Jan den Ouden
+ *              Fritz Elfert
+ * Copyright 2008  by Karsten Keil <kkeil@novell.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/module.h>
+#include <linux/string.h>
+#include "fsm.h"
+
+#define FSM_TIMER_DEBUG 0
+
+void
+mISDN_FsmNew(struct Fsm *fsm,
+       struct FsmNode *fnlist, int fncount)
+{
+	int i;
+
+	fsm->jumpmatrix = kzalloc(sizeof(FSMFNPTR) * fsm->state_count *
+		fsm->event_count, GFP_KERNEL);
+
+	for (i = 0; i < fncount; i++)
+		if ((fnlist[i].state >= fsm->state_count) ||
+		    (fnlist[i].event >= fsm->event_count)) {
+			printk(KERN_ERR
+			    "mISDN_FsmNew Error: %d st(%ld/%ld) ev(%ld/%ld)\n",
+			    i, (long)fnlist[i].state, (long)fsm->state_count,
+			    (long)fnlist[i].event, (long)fsm->event_count);
+		} else
+			fsm->jumpmatrix[fsm->state_count * fnlist[i].event +
+			    fnlist[i].state] = (FSMFNPTR) fnlist[i].routine;
+}
+EXPORT_SYMBOL(mISDN_FsmNew);
+
+void
+mISDN_FsmFree(struct Fsm *fsm)
+{
+	kfree((void *) fsm->jumpmatrix);
+}
+EXPORT_SYMBOL(mISDN_FsmFree);
+
+int
+mISDN_FsmEvent(struct FsmInst *fi, int event, void *arg)
+{
+	FSMFNPTR r;
+
+	if ((fi->state >= fi->fsm->state_count) ||
+	    (event >= fi->fsm->event_count)) {
+		printk(KERN_ERR
+		    "mISDN_FsmEvent Error st(%ld/%ld) ev(%d/%ld)\n",
+		    (long)fi->state, (long)fi->fsm->state_count, event,
+		    (long)fi->fsm->event_count);
+		return 1;
+	}
+	r = fi->fsm->jumpmatrix[fi->fsm->state_count * event + fi->state];
+	if (r) {
+		if (fi->debug)
+			fi->printdebug(fi, "State %s Event %s",
+				fi->fsm->strState[fi->state],
+				fi->fsm->strEvent[event]);
+		r(fi, event, arg);
+		return 0;
+	} else {
+		if (fi->debug)
+			fi->printdebug(fi, "State %s Event %s no action",
+				fi->fsm->strState[fi->state],
+				fi->fsm->strEvent[event]);
+		return 1;
+	}
+}
+EXPORT_SYMBOL(mISDN_FsmEvent);
+
+void
+mISDN_FsmChangeState(struct FsmInst *fi, int newstate)
+{
+	fi->state = newstate;
+	if (fi->debug)
+		fi->printdebug(fi, "ChangeState %s",
+			fi->fsm->strState[newstate]);
+}
+EXPORT_SYMBOL(mISDN_FsmChangeState);
+
+static void
+FsmExpireTimer(struct FsmTimer *ft)
+{
+#if FSM_TIMER_DEBUG
+	if (ft->fi->debug)
+		ft->fi->printdebug(ft->fi, "FsmExpireTimer %lx", (long) ft);
+#endif
+	mISDN_FsmEvent(ft->fi, ft->event, ft->arg);
+}
+
+void
+mISDN_FsmInitTimer(struct FsmInst *fi, struct FsmTimer *ft)
+{
+	ft->fi = fi;
+	ft->tl.function = (void *) FsmExpireTimer;
+	ft->tl.data = (long) ft;
+#if FSM_TIMER_DEBUG
+	if (ft->fi->debug)
+		ft->fi->printdebug(ft->fi, "mISDN_FsmInitTimer %lx", (long) ft);
+#endif
+	init_timer(&ft->tl);
+}
+EXPORT_SYMBOL(mISDN_FsmInitTimer);
+
+void
+mISDN_FsmDelTimer(struct FsmTimer *ft, int where)
+{
+#if FSM_TIMER_DEBUG
+	if (ft->fi->debug)
+		ft->fi->printdebug(ft->fi, "mISDN_FsmDelTimer %lx %d",
+			(long) ft, where);
+#endif
+	del_timer(&ft->tl);
+}
+EXPORT_SYMBOL(mISDN_FsmDelTimer);
+
+int
+mISDN_FsmAddTimer(struct FsmTimer *ft,
+	    int millisec, int event, void *arg, int where)
+{
+
+#if FSM_TIMER_DEBUG
+	if (ft->fi->debug)
+		ft->fi->printdebug(ft->fi, "mISDN_FsmAddTimer %lx %d %d",
+			(long) ft, millisec, where);
+#endif
+
+	if (timer_pending(&ft->tl)) {
+		if (ft->fi->debug) {
+			printk(KERN_WARNING
+				"mISDN_FsmAddTimer: timer already active!\n");
+			ft->fi->printdebug(ft->fi,
+				"mISDN_FsmAddTimer already active!");
+		}
+		return -1;
+	}
+	init_timer(&ft->tl);
+	ft->event = event;
+	ft->arg = arg;
+	ft->tl.expires = jiffies + (millisec * HZ) / 1000;
+	add_timer(&ft->tl);
+	return 0;
+}
+EXPORT_SYMBOL(mISDN_FsmAddTimer);
+
+void
+mISDN_FsmRestartTimer(struct FsmTimer *ft,
+	    int millisec, int event, void *arg, int where)
+{
+
+#if FSM_TIMER_DEBUG
+	if (ft->fi->debug)
+		ft->fi->printdebug(ft->fi, "mISDN_FsmRestartTimer %lx %d %d",
+			(long) ft, millisec, where);
+#endif
+
+	if (timer_pending(&ft->tl))
+		del_timer(&ft->tl);
+	init_timer(&ft->tl);
+	ft->event = event;
+	ft->arg = arg;
+	ft->tl.expires = jiffies + (millisec * HZ) / 1000;
+	add_timer(&ft->tl);
+}
+EXPORT_SYMBOL(mISDN_FsmRestartTimer);
diff --git a/drivers/isdn/mISDN/fsm.h b/drivers/isdn/mISDN/fsm.h
new file mode 100644
index 000000000000..928f5be192c1
--- /dev/null
+++ b/drivers/isdn/mISDN/fsm.h
@@ -0,0 +1,67 @@
+/*
+ *
+ * Author       Karsten Keil <kkeil@novell.com>
+ *
+ * Thanks to    Jan den Ouden
+ *              Fritz Elfert
+ * Copyright 2008  by Karsten Keil <kkeil@novell.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#ifndef _MISDN_FSM_H
+#define _MISDN_FSM_H
+
+#include <linux/timer.h>
+
+/* Statemachine */
+
+struct FsmInst;
+
+typedef void (*FSMFNPTR)(struct FsmInst *, int, void *);
+
+struct Fsm {
+	FSMFNPTR *jumpmatrix;
+	int state_count, event_count;
+	char **strEvent, **strState;
+};
+
+struct FsmInst {
+	struct Fsm *fsm;
+	int state;
+	int debug;
+	void *userdata;
+	int userint;
+	void (*printdebug) (struct FsmInst *, char *, ...);
+};
+
+struct FsmNode {
+	int state, event;
+	void (*routine) (struct FsmInst *, int, void *);
+};
+
+struct FsmTimer {
+	struct FsmInst *fi;
+	struct timer_list tl;
+	int event;
+	void *arg;
+};
+
+extern void mISDN_FsmNew(struct Fsm *, struct FsmNode *, int);
+extern void mISDN_FsmFree(struct Fsm *);
+extern int mISDN_FsmEvent(struct FsmInst *, int , void *);
+extern void mISDN_FsmChangeState(struct FsmInst *, int);
+extern void mISDN_FsmInitTimer(struct FsmInst *, struct FsmTimer *);
+extern int mISDN_FsmAddTimer(struct FsmTimer *, int, int, void *, int);
+extern void mISDN_FsmRestartTimer(struct FsmTimer *, int, int, void *, int);
+extern void mISDN_FsmDelTimer(struct FsmTimer *, int);
+
+#endif
diff --git a/drivers/isdn/mISDN/hwchannel.c b/drivers/isdn/mISDN/hwchannel.c
new file mode 100644
index 000000000000..2596fba4e614
--- /dev/null
+++ b/drivers/isdn/mISDN/hwchannel.c
@@ -0,0 +1,365 @@
+/*
+ *
+ * Author	Karsten Keil <kkeil@novell.com>
+ *
+ * Copyright 2008  by Karsten Keil <kkeil@novell.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/mISDNhw.h>
+
+static void
+dchannel_bh(struct work_struct *ws)
+{
+	struct dchannel	*dch  = container_of(ws, struct dchannel, workq);
+	struct sk_buff	*skb;
+	int		err;
+
+	if (test_and_clear_bit(FLG_RECVQUEUE, &dch->Flags)) {
+		while ((skb = skb_dequeue(&dch->rqueue))) {
+			if (likely(dch->dev.D.peer)) {
+				err = dch->dev.D.recv(dch->dev.D.peer, skb);
+				if (err)
+					dev_kfree_skb(skb);
+			} else
+				dev_kfree_skb(skb);
+		}
+	}
+	if (test_and_clear_bit(FLG_PHCHANGE, &dch->Flags)) {
+		if (dch->phfunc)
+			dch->phfunc(dch);
+	}
+}
+
+static void
+bchannel_bh(struct work_struct *ws)
+{
+	struct bchannel	*bch  = container_of(ws, struct bchannel, workq);
+	struct sk_buff	*skb;
+	int		err;
+
+	if (test_and_clear_bit(FLG_RECVQUEUE, &bch->Flags)) {
+		while ((skb = skb_dequeue(&bch->rqueue))) {
+			if (bch->rcount >= 64)
+				printk(KERN_WARNING "B-channel %p receive "
+					"queue if full, but empties...\n", bch);
+			bch->rcount--;
+			if (likely(bch->ch.peer)) {
+				err = bch->ch.recv(bch->ch.peer, skb);
+				if (err)
+					dev_kfree_skb(skb);
+			} else
+				dev_kfree_skb(skb);
+		}
+	}
+}
+
+int
+mISDN_initdchannel(struct dchannel *ch, int maxlen, void *phf)
+{
+	test_and_set_bit(FLG_HDLC, &ch->Flags);
+	ch->maxlen = maxlen;
+	ch->hw = NULL;
+	ch->rx_skb = NULL;
+	ch->tx_skb = NULL;
+	ch->tx_idx = 0;
+	ch->phfunc = phf;
+	skb_queue_head_init(&ch->squeue);
+	skb_queue_head_init(&ch->rqueue);
+	INIT_LIST_HEAD(&ch->dev.bchannels);
+	INIT_WORK(&ch->workq, dchannel_bh);
+	return 0;
+}
+EXPORT_SYMBOL(mISDN_initdchannel);
+
+int
+mISDN_initbchannel(struct bchannel *ch, int maxlen)
+{
+	ch->Flags = 0;
+	ch->maxlen = maxlen;
+	ch->hw = NULL;
+	ch->rx_skb = NULL;
+	ch->tx_skb = NULL;
+	ch->tx_idx = 0;
+	skb_queue_head_init(&ch->rqueue);
+	ch->rcount = 0;
+	ch->next_skb = NULL;
+	INIT_WORK(&ch->workq, bchannel_bh);
+	return 0;
+}
+EXPORT_SYMBOL(mISDN_initbchannel);
+
+int
+mISDN_freedchannel(struct dchannel *ch)
+{
+	if (ch->tx_skb) {
+		dev_kfree_skb(ch->tx_skb);
+		ch->tx_skb = NULL;
+	}
+	if (ch->rx_skb) {
+		dev_kfree_skb(ch->rx_skb);
+		ch->rx_skb = NULL;
+	}
+	skb_queue_purge(&ch->squeue);
+	skb_queue_purge(&ch->rqueue);
+	flush_scheduled_work();
+	return 0;
+}
+EXPORT_SYMBOL(mISDN_freedchannel);
+
+int
+mISDN_freebchannel(struct bchannel *ch)
+{
+	if (ch->tx_skb) {
+		dev_kfree_skb(ch->tx_skb);
+		ch->tx_skb = NULL;
+	}
+	if (ch->rx_skb) {
+		dev_kfree_skb(ch->rx_skb);
+		ch->rx_skb = NULL;
+	}
+	if (ch->next_skb) {
+		dev_kfree_skb(ch->next_skb);
+		ch->next_skb = NULL;
+	}
+	skb_queue_purge(&ch->rqueue);
+	ch->rcount = 0;
+	flush_scheduled_work();
+	return 0;
+}
+EXPORT_SYMBOL(mISDN_freebchannel);
+
+static inline u_int
+get_sapi_tei(u_char *p)
+{
+	u_int	sapi, tei;
+
+	sapi = *p >> 2;
+	tei = p[1] >> 1;
+	return sapi | (tei << 8);
+}
+
+void
+recv_Dchannel(struct dchannel *dch)
+{
+	struct mISDNhead *hh;
+
+	if (dch->rx_skb->len < 2) { /* at least 2 for sapi / tei */
+		dev_kfree_skb(dch->rx_skb);
+		dch->rx_skb = NULL;
+		return;
+	}
+	hh = mISDN_HEAD_P(dch->rx_skb);
+	hh->prim = PH_DATA_IND;
+	hh->id = get_sapi_tei(dch->rx_skb->data);
+	skb_queue_tail(&dch->rqueue, dch->rx_skb);
+	dch->rx_skb = NULL;
+	schedule_event(dch, FLG_RECVQUEUE);
+}
+EXPORT_SYMBOL(recv_Dchannel);
+
+void
+recv_Bchannel(struct bchannel *bch)
+{
+	struct mISDNhead *hh;
+
+	hh = mISDN_HEAD_P(bch->rx_skb);
+	hh->prim = PH_DATA_IND;
+	hh->id = MISDN_ID_ANY;
+	if (bch->rcount >= 64) {
+		dev_kfree_skb(bch->rx_skb);
+		bch->rx_skb = NULL;
+		return;
+	}
+	bch->rcount++;
+	skb_queue_tail(&bch->rqueue, bch->rx_skb);
+	bch->rx_skb = NULL;
+	schedule_event(bch, FLG_RECVQUEUE);
+}
+EXPORT_SYMBOL(recv_Bchannel);
+
+void
+recv_Dchannel_skb(struct dchannel *dch, struct sk_buff *skb)
+{
+	skb_queue_tail(&dch->rqueue, skb);
+	schedule_event(dch, FLG_RECVQUEUE);
+}
+EXPORT_SYMBOL(recv_Dchannel_skb);
+
+void
+recv_Bchannel_skb(struct bchannel *bch, struct sk_buff *skb)
+{
+	if (bch->rcount >= 64) {
+		dev_kfree_skb(skb);
+		return;
+	}
+	bch->rcount++;
+	skb_queue_tail(&bch->rqueue, skb);
+	schedule_event(bch, FLG_RECVQUEUE);
+}
+EXPORT_SYMBOL(recv_Bchannel_skb);
+
+static void
+confirm_Dsend(struct dchannel *dch)
+{
+	struct sk_buff	*skb;
+
+	skb = _alloc_mISDN_skb(PH_DATA_CNF, mISDN_HEAD_ID(dch->tx_skb),
+	    0, NULL, GFP_ATOMIC);
+	if (!skb) {
+		printk(KERN_ERR "%s: no skb id %x\n", __func__,
+		    mISDN_HEAD_ID(dch->tx_skb));
+		return;
+	}
+	skb_queue_tail(&dch->rqueue, skb);
+	schedule_event(dch, FLG_RECVQUEUE);
+}
+
+int
+get_next_dframe(struct dchannel *dch)
+{
+	dch->tx_idx = 0;
+	dch->tx_skb = skb_dequeue(&dch->squeue);
+	if (dch->tx_skb) {
+		confirm_Dsend(dch);
+		return 1;
+	}
+	dch->tx_skb = NULL;
+	test_and_clear_bit(FLG_TX_BUSY, &dch->Flags);
+	return 0;
+}
+EXPORT_SYMBOL(get_next_dframe);
+
+void
+confirm_Bsend(struct bchannel *bch)
+{
+	struct sk_buff	*skb;
+
+	if (bch->rcount >= 64)
+		return;
+	skb = _alloc_mISDN_skb(PH_DATA_CNF, mISDN_HEAD_ID(bch->tx_skb),
+	    0, NULL, GFP_ATOMIC);
+	if (!skb) {
+		printk(KERN_ERR "%s: no skb id %x\n", __func__,
+		    mISDN_HEAD_ID(bch->tx_skb));
+		return;
+	}
+	bch->rcount++;
+	skb_queue_tail(&bch->rqueue, skb);
+	schedule_event(bch, FLG_RECVQUEUE);
+}
+EXPORT_SYMBOL(confirm_Bsend);
+
+int
+get_next_bframe(struct bchannel *bch)
+{
+	bch->tx_idx = 0;
+	if (test_bit(FLG_TX_NEXT, &bch->Flags)) {
+		bch->tx_skb = bch->next_skb;
+		if (bch->tx_skb) {
+			bch->next_skb = NULL;
+			test_and_clear_bit(FLG_TX_NEXT, &bch->Flags);
+			if (!test_bit(FLG_TRANSPARENT, &bch->Flags))
+				confirm_Bsend(bch); /* not for transparent */
+			return 1;
+		} else {
+			test_and_clear_bit(FLG_TX_NEXT, &bch->Flags);
+			printk(KERN_WARNING "B TX_NEXT without skb\n");
+		}
+	}
+	bch->tx_skb = NULL;
+	test_and_clear_bit(FLG_TX_BUSY, &bch->Flags);
+	return 0;
+}
+EXPORT_SYMBOL(get_next_bframe);
+
+void
+queue_ch_frame(struct mISDNchannel *ch, u_int pr, int id, struct sk_buff *skb)
+{
+	struct mISDNhead *hh;
+
+	if (!skb) {
+		_queue_data(ch, pr, id, 0, NULL, GFP_ATOMIC);
+	} else {
+		if (ch->peer) {
+			hh = mISDN_HEAD_P(skb);
+			hh->prim = pr;
+			hh->id = id;
+			if (!ch->recv(ch->peer, skb))
+				return;
+		}
+		dev_kfree_skb(skb);
+	}
+}
+EXPORT_SYMBOL(queue_ch_frame);
+
+int
+dchannel_senddata(struct dchannel *ch, struct sk_buff *skb)
+{
+	/* check oversize */
+	if (skb->len <= 0) {
+		printk(KERN_WARNING "%s: skb too small\n", __func__);
+		return -EINVAL;
+	}
+	if (skb->len > ch->maxlen) {
+		printk(KERN_WARNING "%s: skb too large(%d/%d)\n",
+			__func__, skb->len, ch->maxlen);
+		return -EINVAL;
+	}
+	/* HW lock must be obtained */
+	if (test_and_set_bit(FLG_TX_BUSY, &ch->Flags)) {
+		skb_queue_tail(&ch->squeue, skb);
+		return 0;
+	} else {
+		/* write to fifo */
+		ch->tx_skb = skb;
+		ch->tx_idx = 0;
+		return 1;
+	}
+}
+EXPORT_SYMBOL(dchannel_senddata);
+
+int
+bchannel_senddata(struct bchannel *ch, struct sk_buff *skb)
+{
+
+	/* check oversize */
+	if (skb->len <= 0) {
+		printk(KERN_WARNING "%s: skb too small\n", __func__);
+		return -EINVAL;
+	}
+	if (skb->len > ch->maxlen) {
+		printk(KERN_WARNING "%s: skb too large(%d/%d)\n",
+			__func__, skb->len, ch->maxlen);
+		return -EINVAL;
+	}
+	/* HW lock must be obtained */
+	/* check for pending next_skb */
+	if (ch->next_skb) {
+		printk(KERN_WARNING
+		    "%s: next_skb exist ERROR (skb->len=%d next_skb->len=%d)\n",
+		    __func__, skb->len, ch->next_skb->len);
+		return -EBUSY;
+	}
+	if (test_and_set_bit(FLG_TX_BUSY, &ch->Flags)) {
+		test_and_set_bit(FLG_TX_NEXT, &ch->Flags);
+		ch->next_skb = skb;
+		return 0;
+	} else {
+		/* write to fifo */
+		ch->tx_skb = skb;
+		ch->tx_idx = 0;
+		return 1;
+	}
+}
+EXPORT_SYMBOL(bchannel_senddata);
diff --git a/drivers/isdn/mISDN/l1oip.h b/drivers/isdn/mISDN/l1oip.h
new file mode 100644
index 000000000000..a23d575449f6
--- /dev/null
+++ b/drivers/isdn/mISDN/l1oip.h
@@ -0,0 +1,91 @@
+/*
+ * see notice in l1oip.c
+ */
+
+/* debugging */
+#define DEBUG_L1OIP_INIT	0x00010000
+#define DEBUG_L1OIP_SOCKET	0x00020000
+#define DEBUG_L1OIP_MGR		0x00040000
+#define DEBUG_L1OIP_MSG		0x00080000
+
+/* enable to disorder received bchannels by sequence 2143658798... */
+/*
+#define REORDER_DEBUG
+*/
+
+/* frames */
+#define L1OIP_MAX_LEN		2048		/* max packet size form l2 */
+#define L1OIP_MAX_PERFRAME	1400		/* max data size in one frame */
+
+
+/* timers */
+#define L1OIP_KEEPALIVE		15
+#define L1OIP_TIMEOUT		65
+
+
+/* socket */
+#define L1OIP_DEFAULTPORT	931
+
+
+/* channel structure */
+struct l1oip_chan {
+	struct dchannel       	*dch;
+	struct bchannel       	*bch;
+	u32			tx_counter;	/* counts xmit bytes/packets */
+	u32			rx_counter;	/* counts recv bytes/packets */
+	u32			codecstate;	/* used by codec to save data */
+#ifdef REORDER_DEBUG
+	int			disorder_flag;
+	struct sk_buff		*disorder_skb;
+	u32			disorder_cnt;
+#endif
+};
+
+
+/* card structure */
+struct l1oip {
+	struct list_head        list;
+
+	/* card */
+	int			registered;	/* if registered with mISDN */
+	char			name[MISDN_MAX_IDLEN];
+	int			idx;		/* card index */
+	int			pri;		/* 1=pri, 0=bri */
+	int			d_idx;		/* current dchannel number */
+	int			b_num;		/* number of bchannels */
+	u32			id;		/* id of connection */
+	int			ondemand;	/* if transmis. is on demand */
+	int			bundle;		/* bundle channels in one frm */
+	int			codec;		/* codec to use for transmis. */
+	int			limit;		/* limit number of bchannels */
+
+	/* timer */
+	struct timer_list 	keep_tl;
+	struct timer_list 	timeout_tl;
+	int			timeout_on;
+	struct work_struct	workq;
+
+	/* socket */
+	struct socket 		*socket;	/* if set, socket is created */
+	struct completion 	socket_complete;/* completion of sock thread */
+	struct task_struct	*socket_thread;
+	spinlock_t 		socket_lock;	/* access sock outside thread */
+	u32			remoteip;	/* if all set, ip is assigned */
+	u16	 		localport;	/* must always be set */
+	u16	 		remoteport;	/* must always be set */
+	struct sockaddr_in	sin_local;	/* local socket name */
+	struct sockaddr_in	sin_remote;	/* remote socket name */
+	struct msghdr		sendmsg;	/* ip message to send */
+	struct iovec		sendiov;	/* iov for message */
+
+	/* frame */
+	struct l1oip_chan	chan[128];	/* channel instances */
+};
+
+extern int l1oip_law_to_4bit(u8 *data, int len, u8 *result, u32 *state);
+extern int l1oip_4bit_to_law(u8 *data, int len, u8 *result);
+extern int l1oip_alaw_to_ulaw(u8 *data, int len, u8 *result);
+extern int l1oip_ulaw_to_alaw(u8 *data, int len, u8 *result);
+extern void l1oip_4bit_free(void);
+extern int l1oip_4bit_alloc(int ulaw);
+
diff --git a/drivers/isdn/mISDN/l1oip_codec.c b/drivers/isdn/mISDN/l1oip_codec.c
new file mode 100644
index 000000000000..a2dc4570ef43
--- /dev/null
+++ b/drivers/isdn/mISDN/l1oip_codec.c
@@ -0,0 +1,374 @@
+/*
+
+ * l1oip_codec.c  generic codec using lookup table
+ *  -> conversion from a-Law to u-Law
+ *  -> conversion from u-Law to a-Law
+ *  -> compression by reducing the number of sample resolution to 4
+ *
+ * NOTE: It is not compatible with any standard codec like ADPCM.
+ *
+ * Author	Andreas Eversberg (jolly@eversberg.eu)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+
+ */
+
+/*
+
+How the codec works:
+--------------------
+
+The volume is increased to increase the dynamic range of the audio signal.
+Each sample is converted to a-LAW with only 16 steps of level resolution.
+A pair of two samples are stored in one byte.
+
+The first byte is stored in the upper bits, the second byte is stored in the
+lower bits.
+
+To speed up compression and decompression, two lookup tables are formed:
+
+- 16 bits index for two samples (law encoded) with 8 bit compressed result.
+- 8 bits index for one compressed data with 16 bits decompressed result.
+
+NOTE: The bytes are handled as they are law-encoded.
+
+*/
+
+#include <linux/vmalloc.h>
+#include <linux/mISDNif.h>
+#include "core.h"
+
+/* definitions of codec. don't use calculations, code may run slower. */
+
+static u8 *table_com;
+static u16 *table_dec;
+
+
+/* alaw -> ulaw */
+static u8 alaw_to_ulaw[256] =
+{
+	0xab, 0x2b, 0xe3, 0x63, 0x8b, 0x0b, 0xc9, 0x49,
+	0xba, 0x3a, 0xf6, 0x76, 0x9b, 0x1b, 0xd7, 0x57,
+	0xa3, 0x23, 0xdd, 0x5d, 0x83, 0x03, 0xc1, 0x41,
+	0xb2, 0x32, 0xeb, 0x6b, 0x93, 0x13, 0xcf, 0x4f,
+	0xaf, 0x2f, 0xe7, 0x67, 0x8f, 0x0f, 0xcd, 0x4d,
+	0xbe, 0x3e, 0xfe, 0x7e, 0x9f, 0x1f, 0xdb, 0x5b,
+	0xa7, 0x27, 0xdf, 0x5f, 0x87, 0x07, 0xc5, 0x45,
+	0xb6, 0x36, 0xef, 0x6f, 0x97, 0x17, 0xd3, 0x53,
+	0xa9, 0x29, 0xe1, 0x61, 0x89, 0x09, 0xc7, 0x47,
+	0xb8, 0x38, 0xf2, 0x72, 0x99, 0x19, 0xd5, 0x55,
+	0xa1, 0x21, 0xdc, 0x5c, 0x81, 0x01, 0xbf, 0x3f,
+	0xb0, 0x30, 0xe9, 0x69, 0x91, 0x11, 0xce, 0x4e,
+	0xad, 0x2d, 0xe5, 0x65, 0x8d, 0x0d, 0xcb, 0x4b,
+	0xbc, 0x3c, 0xfa, 0x7a, 0x9d, 0x1d, 0xd9, 0x59,
+	0xa5, 0x25, 0xde, 0x5e, 0x85, 0x05, 0xc3, 0x43,
+	0xb4, 0x34, 0xed, 0x6d, 0x95, 0x15, 0xd1, 0x51,
+	0xac, 0x2c, 0xe4, 0x64, 0x8c, 0x0c, 0xca, 0x4a,
+	0xbb, 0x3b, 0xf8, 0x78, 0x9c, 0x1c, 0xd8, 0x58,
+	0xa4, 0x24, 0xde, 0x5e, 0x84, 0x04, 0xc2, 0x42,
+	0xb3, 0x33, 0xec, 0x6c, 0x94, 0x14, 0xd0, 0x50,
+	0xb0, 0x30, 0xe8, 0x68, 0x90, 0x10, 0xce, 0x4e,
+	0xbf, 0x3f, 0xfe, 0x7e, 0xa0, 0x20, 0xdc, 0x5c,
+	0xa8, 0x28, 0xe0, 0x60, 0x88, 0x08, 0xc6, 0x46,
+	0xb7, 0x37, 0xf0, 0x70, 0x98, 0x18, 0xd4, 0x54,
+	0xaa, 0x2a, 0xe2, 0x62, 0x8a, 0x0a, 0xc8, 0x48,
+	0xb9, 0x39, 0xf4, 0x74, 0x9a, 0x1a, 0xd6, 0x56,
+	0xa2, 0x22, 0xdd, 0x5d, 0x82, 0x02, 0xc0, 0x40,
+	0xb1, 0x31, 0xea, 0x6a, 0x92, 0x12, 0xcf, 0x4f,
+	0xae, 0x2e, 0xe6, 0x66, 0x8e, 0x0e, 0xcc, 0x4c,
+	0xbd, 0x3d, 0xfc, 0x7c, 0x9e, 0x1e, 0xda, 0x5a,
+	0xa6, 0x26, 0xdf, 0x5f, 0x86, 0x06, 0xc4, 0x44,
+	0xb5, 0x35, 0xee, 0x6e, 0x96, 0x16, 0xd2, 0x52
+};
+
+/* ulaw -> alaw */
+static u8 ulaw_to_alaw[256] =
+{
+	0xab, 0x55, 0xd5, 0x15, 0x95, 0x75, 0xf5, 0x35,
+	0xb5, 0x45, 0xc5, 0x05, 0x85, 0x65, 0xe5, 0x25,
+	0xa5, 0x5d, 0xdd, 0x1d, 0x9d, 0x7d, 0xfd, 0x3d,
+	0xbd, 0x4d, 0xcd, 0x0d, 0x8d, 0x6d, 0xed, 0x2d,
+	0xad, 0x51, 0xd1, 0x11, 0x91, 0x71, 0xf1, 0x31,
+	0xb1, 0x41, 0xc1, 0x01, 0x81, 0x61, 0xe1, 0x21,
+	0x59, 0xd9, 0x19, 0x99, 0x79, 0xf9, 0x39, 0xb9,
+	0x49, 0xc9, 0x09, 0x89, 0x69, 0xe9, 0x29, 0xa9,
+	0xd7, 0x17, 0x97, 0x77, 0xf7, 0x37, 0xb7, 0x47,
+	0xc7, 0x07, 0x87, 0x67, 0xe7, 0x27, 0xa7, 0xdf,
+	0x9f, 0x7f, 0xff, 0x3f, 0xbf, 0x4f, 0xcf, 0x0f,
+	0x8f, 0x6f, 0xef, 0x2f, 0x53, 0x13, 0x73, 0x33,
+	0xb3, 0x43, 0xc3, 0x03, 0x83, 0x63, 0xe3, 0x23,
+	0xa3, 0x5b, 0xdb, 0x1b, 0x9b, 0x7b, 0xfb, 0x3b,
+	0xbb, 0xbb, 0x4b, 0x4b, 0xcb, 0xcb, 0x0b, 0x0b,
+	0x8b, 0x8b, 0x6b, 0x6b, 0xeb, 0xeb, 0x2b, 0x2b,
+	0xab, 0x54, 0xd4, 0x14, 0x94, 0x74, 0xf4, 0x34,
+	0xb4, 0x44, 0xc4, 0x04, 0x84, 0x64, 0xe4, 0x24,
+	0xa4, 0x5c, 0xdc, 0x1c, 0x9c, 0x7c, 0xfc, 0x3c,
+	0xbc, 0x4c, 0xcc, 0x0c, 0x8c, 0x6c, 0xec, 0x2c,
+	0xac, 0x50, 0xd0, 0x10, 0x90, 0x70, 0xf0, 0x30,
+	0xb0, 0x40, 0xc0, 0x00, 0x80, 0x60, 0xe0, 0x20,
+	0x58, 0xd8, 0x18, 0x98, 0x78, 0xf8, 0x38, 0xb8,
+	0x48, 0xc8, 0x08, 0x88, 0x68, 0xe8, 0x28, 0xa8,
+	0xd6, 0x16, 0x96, 0x76, 0xf6, 0x36, 0xb6, 0x46,
+	0xc6, 0x06, 0x86, 0x66, 0xe6, 0x26, 0xa6, 0xde,
+	0x9e, 0x7e, 0xfe, 0x3e, 0xbe, 0x4e, 0xce, 0x0e,
+	0x8e, 0x6e, 0xee, 0x2e, 0x52, 0x12, 0x72, 0x32,
+	0xb2, 0x42, 0xc2, 0x02, 0x82, 0x62, 0xe2, 0x22,
+	0xa2, 0x5a, 0xda, 0x1a, 0x9a, 0x7a, 0xfa, 0x3a,
+	0xba, 0xba, 0x4a, 0x4a, 0xca, 0xca, 0x0a, 0x0a,
+	0x8a, 0x8a, 0x6a, 0x6a, 0xea, 0xea, 0x2a, 0x2a
+};
+
+/* alaw -> 4bit compression */
+static u8 alaw_to_4bit[256] = {
+	0x0e, 0x01, 0x0a, 0x05, 0x0f, 0x00, 0x0c, 0x03,
+	0x0d, 0x02, 0x08, 0x07, 0x0f, 0x00, 0x0b, 0x04,
+	0x0e, 0x01, 0x0a, 0x05, 0x0f, 0x00, 0x0c, 0x03,
+	0x0d, 0x02, 0x09, 0x06, 0x0f, 0x00, 0x0b, 0x04,
+	0x0e, 0x01, 0x0a, 0x05, 0x0f, 0x00, 0x0c, 0x03,
+	0x0d, 0x02, 0x08, 0x07, 0x0f, 0x00, 0x0b, 0x04,
+	0x0e, 0x01, 0x0a, 0x05, 0x0f, 0x00, 0x0c, 0x03,
+	0x0d, 0x02, 0x09, 0x06, 0x0f, 0x00, 0x0b, 0x04,
+	0x0e, 0x01, 0x0a, 0x05, 0x0f, 0x00, 0x0c, 0x03,
+	0x0d, 0x02, 0x08, 0x07, 0x0f, 0x00, 0x0b, 0x04,
+	0x0e, 0x01, 0x0a, 0x05, 0x0f, 0x00, 0x0d, 0x02,
+	0x0e, 0x02, 0x09, 0x06, 0x0f, 0x00, 0x0b, 0x04,
+	0x0e, 0x01, 0x0a, 0x05, 0x0f, 0x00, 0x0c, 0x03,
+	0x0d, 0x02, 0x08, 0x07, 0x0f, 0x00, 0x0b, 0x04,
+	0x0e, 0x01, 0x0a, 0x05, 0x0f, 0x00, 0x0c, 0x03,
+	0x0d, 0x02, 0x09, 0x06, 0x0f, 0x00, 0x0b, 0x04,
+	0x0e, 0x01, 0x0a, 0x05, 0x0f, 0x00, 0x0c, 0x03,
+	0x0d, 0x02, 0x08, 0x07, 0x0f, 0x00, 0x0b, 0x04,
+	0x0e, 0x01, 0x0a, 0x05, 0x0f, 0x00, 0x0c, 0x03,
+	0x0d, 0x02, 0x09, 0x06, 0x0f, 0x00, 0x0b, 0x04,
+	0x0e, 0x02, 0x09, 0x06, 0x0f, 0x00, 0x0b, 0x04,
+	0x0d, 0x02, 0x08, 0x07, 0x0f, 0x01, 0x0a, 0x05,
+	0x0e, 0x01, 0x0a, 0x05, 0x0f, 0x00, 0x0c, 0x03,
+	0x0d, 0x02, 0x09, 0x07, 0x0f, 0x00, 0x0b, 0x04,
+	0x0e, 0x01, 0x0a, 0x05, 0x0f, 0x00, 0x0c, 0x03,
+	0x0d, 0x02, 0x08, 0x07, 0x0f, 0x00, 0x0b, 0x04,
+	0x0e, 0x01, 0x0a, 0x05, 0x0f, 0x00, 0x0c, 0x03,
+	0x0d, 0x02, 0x09, 0x06, 0x0f, 0x00, 0x0b, 0x04,
+	0x0e, 0x01, 0x0a, 0x05, 0x0f, 0x00, 0x0c, 0x03,
+	0x0d, 0x02, 0x08, 0x07, 0x0f, 0x00, 0x0b, 0x04,
+	0x0e, 0x01, 0x0a, 0x05, 0x0f, 0x00, 0x0c, 0x03,
+	0x0d, 0x02, 0x09, 0x06, 0x0f, 0x00, 0x0b, 0x04,
+};
+
+/* 4bit -> alaw decompression */
+static u8 _4bit_to_alaw[16] = {
+	0x5d, 0x51, 0xd9, 0xd7, 0x5f, 0x53, 0xa3, 0x4b,
+	0x2a, 0x3a, 0x22, 0x2e, 0x26, 0x56, 0x20, 0x2c,
+};
+
+/* ulaw -> 4bit compression */
+static u8 ulaw_to_4bit[256] = {
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+	0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01,
+	0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01,
+	0x02, 0x02, 0x02, 0x02, 0x02, 0x02, 0x02, 0x02,
+	0x02, 0x02, 0x02, 0x02, 0x02, 0x02, 0x02, 0x02,
+	0x03, 0x03, 0x03, 0x03, 0x03, 0x03, 0x03, 0x03,
+	0x03, 0x03, 0x03, 0x03, 0x03, 0x03, 0x04, 0x04,
+	0x04, 0x04, 0x04, 0x04, 0x04, 0x04, 0x04, 0x04,
+	0x04, 0x04, 0x04, 0x04, 0x05, 0x05, 0x05, 0x05,
+	0x05, 0x05, 0x05, 0x05, 0x05, 0x05, 0x05, 0x05,
+	0x06, 0x06, 0x06, 0x06, 0x06, 0x06, 0x06, 0x06,
+	0x07, 0x07, 0x07, 0x07, 0x07, 0x07, 0x07, 0x07,
+	0x07, 0x07, 0x07, 0x07, 0x07, 0x07, 0x07, 0x08,
+	0x0f, 0x0f, 0x0f, 0x0f, 0x0f, 0x0f, 0x0f, 0x0f,
+	0x0f, 0x0f, 0x0f, 0x0f, 0x0f, 0x0f, 0x0f, 0x0f,
+	0x0f, 0x0f, 0x0f, 0x0f, 0x0f, 0x0f, 0x0f, 0x0f,
+	0x0f, 0x0f, 0x0f, 0x0f, 0x0f, 0x0f, 0x0f, 0x0f,
+	0x0f, 0x0e, 0x0e, 0x0e, 0x0e, 0x0e, 0x0e, 0x0e,
+	0x0e, 0x0e, 0x0e, 0x0e, 0x0e, 0x0e, 0x0e, 0x0e,
+	0x0e, 0x0d, 0x0d, 0x0d, 0x0d, 0x0d, 0x0d, 0x0d,
+	0x0d, 0x0d, 0x0d, 0x0d, 0x0d, 0x0d, 0x0d, 0x0d,
+	0x0c, 0x0c, 0x0c, 0x0c, 0x0c, 0x0c, 0x0c, 0x0c,
+	0x0c, 0x0c, 0x0c, 0x0c, 0x0c, 0x0c, 0x0b, 0x0b,
+	0x0b, 0x0b, 0x0b, 0x0b, 0x0b, 0x0b, 0x0b, 0x0b,
+	0x0b, 0x0b, 0x0b, 0x0b, 0x0a, 0x0a, 0x0a, 0x0a,
+	0x0a, 0x0a, 0x0a, 0x0a, 0x0a, 0x0a, 0x0a, 0x0a,
+	0x09, 0x09, 0x09, 0x09, 0x09, 0x09, 0x09, 0x09,
+	0x09, 0x08, 0x08, 0x08, 0x08, 0x08, 0x08, 0x08,
+	0x08, 0x08, 0x08, 0x08, 0x08, 0x08, 0x08, 0x08,
+};
+
+/* 4bit -> ulaw decompression */
+static u8 _4bit_to_ulaw[16] = {
+	0x11, 0x21, 0x31, 0x40, 0x4e, 0x5c, 0x68, 0x71,
+	0xfe, 0xef, 0xe7, 0xdb, 0xcd, 0xbf, 0xaf, 0x9f,
+};
+
+
+/*
+ * Compresses data to the result buffer
+ * The result size must be at least half of the input buffer.
+ * The number of samples also must be even!
+ */
+int
+l1oip_law_to_4bit(u8 *data, int len, u8 *result, u32 *state)
+{
+	int ii, i = 0, o = 0;
+
+	if (!len)
+		return 0;
+
+	/* send saved byte and first input byte */
+	if (*state) {
+		*result++ = table_com[(((*state)<<8)&0xff00) | (*data++)];
+		len--;
+		o++;
+	}
+
+	ii = len >> 1;
+
+	while (i < ii) {
+		*result++ = table_com[(data[0]<<8) | (data[1])];
+		data += 2;
+		i++;
+		o++;
+	}
+
+	/* if len has an odd number, we save byte for next call */
+	if (len & 1)
+		*state = 0x100 + *data;
+	else
+		*state = 0;
+
+	return o;
+}
+
+/* Decompress data to the result buffer
+ * The result size must be the number of sample in packet. (2 * input data)
+ * The number of samples in the result are even!
+ */
+int
+l1oip_4bit_to_law(u8 *data, int len, u8 *result)
+{
+	int i = 0;
+	u16 r;
+
+	while (i < len) {
+		r = table_dec[*data++];
+		*result++ = r>>8;
+		*result++ = r;
+		i++;
+	}
+
+	return len << 1;
+}
+
+
+/*
+ * law conversion
+ */
+int
+l1oip_alaw_to_ulaw(u8 *data, int len, u8 *result)
+{
+	int i = 0;
+
+	while (i < len) {
+		*result++ = alaw_to_ulaw[*data++];
+		i++;
+	}
+
+	return len;
+}
+
+int
+l1oip_ulaw_to_alaw(u8 *data, int len, u8 *result)
+{
+	int i = 0;
+
+	while (i < len) {
+		*result++ = ulaw_to_alaw[*data++];
+		i++;
+	}
+
+	return len;
+}
+
+
+/*
+ * generate/free compression and decompression table
+ */
+void
+l1oip_4bit_free(void)
+{
+	if (table_dec)
+		vfree(table_dec);
+	if (table_com)
+		vfree(table_com);
+	table_com = NULL;
+	table_dec = NULL;
+}
+
+int
+l1oip_4bit_alloc(int ulaw)
+{
+	int i1, i2, c, sample;
+
+	/* in case, it is called again */
+	if (table_dec)
+		return 0;
+
+	/* alloc conversion tables */
+	table_com = vmalloc(65536);
+	table_dec = vmalloc(512);
+	if (!table_com | !table_dec) {
+		l1oip_4bit_free();
+		return -ENOMEM;
+	}
+	memset(table_com, 0, 65536);
+	memset(table_dec, 0, 512);
+	/* generate compression table */
+	i1 = 0;
+	while (i1 < 256) {
+		if (ulaw)
+			c = ulaw_to_4bit[i1];
+		else
+			c = alaw_to_4bit[i1];
+		i2 = 0;
+		while (i2 < 256) {
+			table_com[(i1<<8) | i2] |= (c<<4);
+			table_com[(i2<<8) | i1] |= c;
+			i2++;
+		}
+		i1++;
+	}
+
+	/* generate decompression table */
+	i1 = 0;
+	while (i1 < 16) {
+		if (ulaw)
+			sample = _4bit_to_ulaw[i1];
+		else
+			sample = _4bit_to_alaw[i1];
+		i2 = 0;
+		while (i2 < 16) {
+			table_dec[(i1<<4) | i2] |= (sample<<8);
+			table_dec[(i2<<4) | i1] |= sample;
+			i2++;
+		}
+		i1++;
+	}
+
+	return 0;
+}
+
+
diff --git a/drivers/isdn/mISDN/l1oip_core.c b/drivers/isdn/mISDN/l1oip_core.c
new file mode 100644
index 000000000000..e42150a57780
--- /dev/null
+++ b/drivers/isdn/mISDN/l1oip_core.c
@@ -0,0 +1,1516 @@
+/*
+
+ * l1oip.c  low level driver for tunneling layer 1 over IP
+ *
+ * NOTE: It is not compatible with TDMoIP nor "ISDN over IP".
+ *
+ * Author	Andreas Eversberg (jolly@eversberg.eu)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ */
+
+/* module parameters:
+ * type:
+	Value 1	= BRI
+	Value 2	= PRI
+	Value 3 = BRI (multi channel frame, not supported yet)
+	Value 4 = PRI (multi channel frame, not supported yet)
+	A multi channel frame reduces overhead to a single frame for all
+	b-channels, but increases delay.
+	(NOTE: Multi channel frames are not implemented yet.)
+
+ * codec:
+	Value 0 = transparent (default)
+	Value 1 = transfer ALAW
+	Value 2 = transfer ULAW
+	Value 3 = transfer generic 4 bit compression.
+
+ * ulaw:
+	0 = we use a-Law (default)
+	1 = we use u-Law
+
+ * limit:
+	limitation of B-channels to control bandwidth (1...126)
+	BRI: 1 or 2
+	PRI: 1-30, 31-126 (126, because dchannel ist not counted here)
+	Also limited ressources are used for stack, resulting in less channels.
+	It is possible to have more channels than 30 in PRI mode, this must
+	be supported by the application.
+
+ * ip:
+	byte representation of remote ip address (127.0.0.1 -> 127,0,0,1)
+	If not given or four 0, no remote address is set.
+	For multiple interfaces, concat ip addresses. (127,0,0,1,127,0,0,1)
+
+ * port:
+	port number (local interface)
+	If not given or 0, port 931 is used for fist instance, 932 for next...
+	For multiple interfaces, different ports must be given.
+
+ * remoteport:
+	port number (remote interface)
+	If not given or 0, remote port equals local port
+	For multiple interfaces on equal sites, different ports must be given.
+
+ * ondemand:
+	0 = fixed (always transmit packets, even when remote side timed out)
+	1 = on demand (only transmit packets, when remote side is detected)
+	the default is 0
+	NOTE: ID must also be set for on demand.
+
+ * id:
+	optional value to identify frames. This value must be equal on both
+	peers and should be random. If omitted or 0, no ID is transmitted.
+
+ * debug:
+	NOTE: only one debug value must be given for all cards
+	enable debugging (see l1oip.h for debug options)
+
+
+Special mISDN controls:
+
+ op = MISDN_CTRL_SETPEER*
+ p1 = bytes 0-3 : remote IP address in network order (left element first)
+ p2 = bytes 1-2 : remote port in network order (high byte first)
+ optional:
+ p2 = bytes 3-4 : local port in network order (high byte first)
+
+ op = MISDN_CTRL_UNSETPEER*
+
+ * Use l1oipctrl for comfortable setting or removing ip address.
+   (Layer 1 Over IP CTRL)
+
+
+L1oIP-Protocol
+--------------
+
+Frame Header:
+
+ 7 6 5 4 3 2 1 0
++---------------+
+|Ver|T|I|Coding |
++---------------+
+|  ID byte 3 *  |
++---------------+
+|  ID byte 2 *  |
++---------------+
+|  ID byte 1 *  |
++---------------+
+|  ID byte 0 *  |
++---------------+
+|M|   Channel   |
++---------------+
+|    Length *   |
++---------------+
+| Time Base MSB |
++---------------+
+| Time Base LSB |
++---------------+
+| Data....	|
+
+...
+
+|               |
++---------------+
+|M|   Channel   |
++---------------+
+|    Length *   |
++---------------+
+| Time Base MSB |
++---------------+
+| Time Base LSB |
++---------------+
+| Data....	|
+
+...
+
+
+* Only included in some cases.
+
+- Ver = Version
+If version is missmatch, the frame must be ignored.
+
+- T = Type of interface
+Must be 0 for S0 or 1 for E1.
+
+- I = Id present
+If bit is set, four ID bytes are included in frame.
+
+- ID = Connection ID
+Additional ID to prevent Denial of Service attacs. Also it prevents hijacking
+connections with dynamic IP. The ID should be random and must not be 0.
+
+- Coding = Type of codec
+Must be 0 for no transcoding. Also for D-channel and other HDLC frames.
+ 1 and 2 are reserved for explicitly use of a-LAW or u-LAW codec.
+ 3 is used for generic table compressor.
+
+- M = More channels to come. If this flag is 1, the following byte contains
+the length of the channel data. After the data block, the next channel will
+be defined. The flag for the last channel block (or if only one channel is
+transmitted), must be 0 and no length is given.
+
+- Channel = Channel number
+0 reserved
+1-3 channel data for S0 (3 is D-channel)
+1-31 channel data for E1 (16 is D-channel)
+32-127 channel data for extended E1 (16 is D-channel)
+
+- The length is used if the M-flag is 1. It is used to find the next channel
+inside frame.
+NOTE: A value of 0 equals 256 bytes of data.
+ -> For larger data blocks, a single frame must be used.
+ -> For larger streams, a single frame or multiple blocks with same channel ID
+   must be used.
+
+- Time Base = Timestamp of first sample in frame
+The "Time Base" is used to rearange packets and to detect packet loss.
+The 16 bits are sent in network order (MSB first) and count 1/8000 th of a
+second. This causes a wrap arround each 8,192 seconds. There is no requirement
+for the initial "Time Base", but 0 should be used for the first packet.
+In case of HDLC data, this timestamp counts the packet or byte number.
+
+
+Two Timers:
+
+After initialisation, a timer of 15 seconds is started. Whenever a packet is
+transmitted, the timer is reset to 15 seconds again. If the timer expires, an
+empty packet is transmitted. This keep the connection alive.
+
+When a valid packet is received, a timer 65 seconds is started. The interface
+become ACTIVE. If the timer expires, the interface becomes INACTIVE.
+
+
+Dynamic IP handling:
+
+To allow dynamic IP, the ID must be non 0. In this case, any packet with the
+correct port number and ID will be accepted. If the remote side changes its IP
+the new IP is used for all transmitted packets until it changes again.
+
+
+On Demand:
+
+If the ondemand parameter is given, the remote IP is set to 0 on timeout.
+This will stop keepalive traffic to remote. If the remote is online again,
+traffic will continue to the remote address. This is usefull for road warriors.
+This feature only works with ID set, otherwhise it is highly unsecure.
+
+
+Socket and Thread
+-----------------
+
+The complete socket opening and closing is done by a thread.
+When the thread opened a socket, the hc->socket descriptor is set. Whenever a
+packet shall be sent to the socket, the hc->socket must be checked wheter not
+NULL. To prevent change in socket descriptor, the hc->socket_lock must be used.
+To change the socket, a recall of l1oip_socket_open() will safely kill the
+socket process and create a new one.
+
+*/
+
+#define L1OIP_VERSION	0	/* 0...3 */
+
+#include <linux/module.h>
+#include <linux/delay.h>
+#include <linux/mISDNif.h>
+#include <linux/mISDNhw.h>
+#include <linux/mISDNdsp.h>
+#include <linux/init.h>
+#include <linux/in.h>
+#include <linux/inet.h>
+#include <linux/workqueue.h>
+#include <linux/kthread.h>
+#include <net/sock.h>
+#include "core.h"
+#include "l1oip.h"
+
+static const char *l1oip_revision = "2.00";
+
+static int l1oip_cnt;
+static spinlock_t l1oip_lock;
+static struct list_head l1oip_ilist;
+
+#define MAX_CARDS	16
+static u_int type[MAX_CARDS];
+static u_int codec[MAX_CARDS];
+static u_int ip[MAX_CARDS*4];
+static u_int port[MAX_CARDS];
+static u_int remoteport[MAX_CARDS];
+static u_int ondemand[MAX_CARDS];
+static u_int limit[MAX_CARDS];
+static u_int id[MAX_CARDS];
+static int debug;
+static int ulaw;
+
+MODULE_AUTHOR("Andreas Eversberg");
+MODULE_LICENSE("GPL");
+module_param_array(type, uint, NULL, S_IRUGO | S_IWUSR);
+module_param_array(codec, uint, NULL, S_IRUGO | S_IWUSR);
+module_param_array(ip, uint, NULL, S_IRUGO | S_IWUSR);
+module_param_array(port, uint, NULL, S_IRUGO | S_IWUSR);
+module_param_array(remoteport, uint, NULL, S_IRUGO | S_IWUSR);
+module_param_array(ondemand, uint, NULL, S_IRUGO | S_IWUSR);
+module_param_array(limit, uint, NULL, S_IRUGO | S_IWUSR);
+module_param_array(id, uint, NULL, S_IRUGO | S_IWUSR);
+module_param(ulaw, uint, S_IRUGO | S_IWUSR);
+module_param(debug, uint, S_IRUGO | S_IWUSR);
+
+/*
+ * send a frame via socket, if open and restart timer
+ */
+static int
+l1oip_socket_send(struct l1oip *hc, u8 localcodec, u8 channel, u32 chanmask,
+	u16 timebase, u8 *buf, int len)
+{
+	u8 *p;
+	int multi = 0;
+	u8 frame[len+32];
+	struct socket *socket = NULL;
+	mm_segment_t oldfs;
+
+	if (debug & DEBUG_L1OIP_MSG)
+		printk(KERN_DEBUG "%s: sending data to socket (len = %d)\n",
+			__func__, len);
+
+	p = frame;
+
+	/* restart timer */
+	if ((int)(hc->keep_tl.expires-jiffies) < 5*HZ) {
+		del_timer(&hc->keep_tl);
+		hc->keep_tl.expires = jiffies + L1OIP_KEEPALIVE*HZ;
+		add_timer(&hc->keep_tl);
+	} else
+		hc->keep_tl.expires = jiffies + L1OIP_KEEPALIVE*HZ;
+
+	if (debug & DEBUG_L1OIP_MSG)
+		printk(KERN_DEBUG "%s: resetting timer\n", __func__);
+
+	/* drop if we have no remote ip or port */
+	if (!hc->sin_remote.sin_addr.s_addr || !hc->sin_remote.sin_port) {
+		if (debug & DEBUG_L1OIP_MSG)
+			printk(KERN_DEBUG "%s: dropping frame, because remote "
+				"IP is not set.\n", __func__);
+		return len;
+	}
+
+	/* assemble frame */
+	*p++ = (L1OIP_VERSION<<6) /* version and coding */
+	     | (hc->pri?0x20:0x00) /* type */
+	     | (hc->id?0x10:0x00) /* id */
+	     | localcodec;
+	if (hc->id) {
+		*p++ = hc->id>>24; /* id */
+		*p++ = hc->id>>16;
+		*p++ = hc->id>>8;
+		*p++ = hc->id;
+	}
+	*p++ = (multi == 1)?0x80:0x00 + channel; /* m-flag, channel */
+	if (multi == 1)
+		*p++ = len; /* length */
+	*p++ = timebase>>8; /* time base */
+	*p++ = timebase;
+
+	if (buf && len) { /* add data to frame */
+		if (localcodec == 1 && ulaw)
+			l1oip_ulaw_to_alaw(buf, len, p);
+		else if (localcodec == 2 && !ulaw)
+			l1oip_alaw_to_ulaw(buf, len, p);
+		else if (localcodec == 3)
+			len = l1oip_law_to_4bit(buf, len, p,
+				&hc->chan[channel].codecstate);
+		else
+			memcpy(p, buf, len);
+	}
+	len += p - frame;
+
+	/* check for socket in safe condition */
+	spin_lock(&hc->socket_lock);
+	if (!hc->socket) {
+		spin_unlock(&hc->socket_lock);
+		return 0;
+	}
+	/* seize socket */
+	socket = hc->socket;
+	hc->socket = NULL;
+	spin_unlock(&hc->socket_lock);
+	/* send packet */
+	if (debug & DEBUG_L1OIP_MSG)
+		printk(KERN_DEBUG "%s: sending packet to socket (len "
+			"= %d)\n", __func__, len);
+	hc->sendiov.iov_base = frame;
+	hc->sendiov.iov_len  = len;
+	oldfs = get_fs();
+	set_fs(KERNEL_DS);
+	len = sock_sendmsg(socket, &hc->sendmsg, len);
+	set_fs(oldfs);
+	/* give socket back */
+	hc->socket = socket; /* no locking required */
+
+	return len;
+}
+
+
+/*
+ * receive channel data from socket
+ */
+static void
+l1oip_socket_recv(struct l1oip *hc, u8 remotecodec, u8 channel, u16 timebase,
+	u8 *buf, int len)
+{
+	struct sk_buff *nskb;
+	struct bchannel *bch;
+	struct dchannel *dch;
+	u8 *p;
+	u32 rx_counter;
+
+	if (len == 0) {
+		if (debug & DEBUG_L1OIP_MSG)
+			printk(KERN_DEBUG "%s: received empty keepalive data, "
+				"ignoring\n", __func__);
+		return;
+	}
+
+	if (debug & DEBUG_L1OIP_MSG)
+		printk(KERN_DEBUG "%s: received data, sending to mISDN (%d)\n",
+			__func__, len);
+
+	if (channel < 1 || channel > 127) {
+		printk(KERN_WARNING "%s: packet error - channel %d out of "
+			"range\n", __func__, channel);
+		return;
+	}
+	dch = hc->chan[channel].dch;
+	bch = hc->chan[channel].bch;
+	if (!dch && !bch) {
+		printk(KERN_WARNING "%s: packet error - channel %d not in "
+			"stack\n", __func__, channel);
+		return;
+	}
+
+	/* prepare message */
+	nskb = mI_alloc_skb((remotecodec == 3)?(len<<1):len, GFP_ATOMIC);
+	if (!nskb) {
+		printk(KERN_ERR "%s: No mem for skb.\n", __func__);
+		return;
+	}
+	p = skb_put(nskb, (remotecodec == 3)?(len<<1):len);
+
+	if (remotecodec == 1 && ulaw)
+		l1oip_alaw_to_ulaw(buf, len, p);
+	else if (remotecodec == 2 && !ulaw)
+		l1oip_ulaw_to_alaw(buf, len, p);
+	else if (remotecodec == 3)
+		len = l1oip_4bit_to_law(buf, len, p);
+	else
+		memcpy(p, buf, len);
+
+	/* send message up */
+	if (dch && len >= 2) {
+		dch->rx_skb = nskb;
+		recv_Dchannel(dch);
+	}
+	if (bch) {
+		/* expand 16 bit sequence number to 32 bit sequence number */
+		rx_counter = hc->chan[channel].rx_counter;
+		if (((s16)(timebase - rx_counter)) >= 0) {
+			/* time has changed forward */
+			if (timebase >= (rx_counter & 0xffff))
+				rx_counter =
+					(rx_counter & 0xffff0000) | timebase;
+			else
+				rx_counter = ((rx_counter & 0xffff0000)+0x10000)
+					| timebase;
+		} else {
+			/* time has changed backwards */
+			if (timebase < (rx_counter & 0xffff))
+				rx_counter =
+					(rx_counter & 0xffff0000) | timebase;
+			else
+				rx_counter = ((rx_counter & 0xffff0000)-0x10000)
+					| timebase;
+		}
+		hc->chan[channel].rx_counter = rx_counter;
+
+#ifdef REORDER_DEBUG
+		if (hc->chan[channel].disorder_flag) {
+			struct sk_buff *skb;
+			int cnt;
+			skb = hc->chan[channel].disorder_skb;
+			hc->chan[channel].disorder_skb = nskb;
+			nskb = skb;
+			cnt = hc->chan[channel].disorder_cnt;
+			hc->chan[channel].disorder_cnt = rx_counter;
+			rx_counter = cnt;
+		}
+		hc->chan[channel].disorder_flag ^= 1;
+		if (nskb)
+#endif
+		queue_ch_frame(&bch->ch, PH_DATA_IND, rx_counter, nskb);
+	}
+}
+
+
+/*
+ * parse frame and extract channel data
+ */
+static void
+l1oip_socket_parse(struct l1oip *hc, struct sockaddr_in *sin, u8 *buf, int len)
+{
+	u32			id;
+	u8			channel;
+	u8			remotecodec;
+	u16			timebase;
+	int			m, mlen;
+	int			len_start = len; /* initial frame length */
+	struct dchannel		*dch = hc->chan[hc->d_idx].dch;
+
+	if (debug & DEBUG_L1OIP_MSG)
+		printk(KERN_DEBUG "%s: received frame, parsing... (%d)\n",
+			__func__, len);
+
+	/* check lenght */
+	if (len < 1+1+2) {
+		printk(KERN_WARNING "%s: packet error - length %d below "
+			"4 bytes\n", __func__, len);
+		return;
+	}
+
+	/* check version */
+	if (((*buf)>>6) != L1OIP_VERSION) {
+		printk(KERN_WARNING "%s: packet error - unknown version %d\n",
+			__func__, buf[0]>>6);
+		return;
+	}
+
+	/* check type */
+	if (((*buf)&0x20) && !hc->pri) {
+		printk(KERN_WARNING "%s: packet error - received E1 packet "
+			"on S0 interface\n", __func__);
+		return;
+	}
+	if (!((*buf)&0x20) && hc->pri) {
+		printk(KERN_WARNING "%s: packet error - received S0 packet "
+			"on E1 interface\n", __func__);
+		return;
+	}
+
+	/* get id flag */
+	id = (*buf>>4)&1;
+
+	/* check coding */
+	remotecodec = (*buf) & 0x0f;
+	if (remotecodec > 3) {
+		printk(KERN_WARNING "%s: packet error - remotecodec %d "
+			"unsupported\n", __func__, remotecodec);
+		return;
+	}
+	buf++;
+	len--;
+
+	/* check id */
+	if (id) {
+		if (!hc->id) {
+			printk(KERN_WARNING "%s: packet error - packet has id "
+				"0x%x, but we have not\n", __func__, id);
+			return;
+		}
+		if (len < 4) {
+			printk(KERN_WARNING "%s: packet error - packet too "
+				"short for ID value\n", __func__);
+			return;
+		}
+		id = (*buf++) << 24;
+		id += (*buf++) << 16;
+		id += (*buf++) << 8;
+		id += (*buf++);
+		len -= 4;
+
+		if (id != hc->id) {
+			printk(KERN_WARNING "%s: packet error - ID mismatch, "
+				"got 0x%x, we 0x%x\n",
+				__func__, id, hc->id);
+			return;
+		}
+	} else {
+		if (hc->id) {
+			printk(KERN_WARNING "%s: packet error - packet has no "
+				"ID, but we have\n", __func__);
+			return;
+		}
+	}
+
+multiframe:
+	if (len < 1) {
+		printk(KERN_WARNING "%s: packet error - packet too short, "
+			"channel expected at position %d.\n",
+			__func__, len-len_start+1);
+		return;
+	}
+
+	/* get channel and multiframe flag */
+	channel = *buf&0x7f;
+	m = *buf >> 7;
+	buf++;
+	len--;
+
+	/* check length on multiframe */
+	if (m) {
+		if (len < 1) {
+			printk(KERN_WARNING "%s: packet error - packet too "
+				"short, length expected at position %d.\n",
+				__func__, len_start-len-1);
+			return;
+		}
+
+		mlen = *buf++;
+		len--;
+		if (mlen == 0)
+			mlen = 256;
+		if (len < mlen+3) {
+			printk(KERN_WARNING "%s: packet error - length %d at "
+				"position %d exceeds total length %d.\n",
+				__func__, mlen, len_start-len-1, len_start);
+			return;
+		}
+		if (len == mlen+3) {
+			printk(KERN_WARNING "%s: packet error - length %d at "
+				"position %d will not allow additional "
+				"packet.\n",
+				__func__, mlen, len_start-len+1);
+			return;
+		}
+	} else
+		mlen = len-2; /* single frame, substract timebase */
+
+	if (len < 2) {
+		printk(KERN_WARNING "%s: packet error - packet too short, time "
+			"base expected at position %d.\n",
+			__func__, len-len_start+1);
+		return;
+	}
+
+	/* get time base */
+	timebase = (*buf++) << 8;
+	timebase |= (*buf++);
+	len -= 2;
+
+	/* if inactive, we send up a PH_ACTIVATE and activate */
+	if (!test_bit(FLG_ACTIVE, &dch->Flags)) {
+		if (debug & (DEBUG_L1OIP_MSG|DEBUG_L1OIP_SOCKET))
+			printk(KERN_DEBUG "%s: interface become active due to "
+				"received packet\n", __func__);
+		test_and_set_bit(FLG_ACTIVE, &dch->Flags);
+		_queue_data(&dch->dev.D, PH_ACTIVATE_IND, MISDN_ID_ANY, 0,
+			NULL, GFP_ATOMIC);
+	}
+
+	/* distribute packet */
+	l1oip_socket_recv(hc, remotecodec, channel, timebase, buf, mlen);
+	buf += mlen;
+	len -= mlen;
+
+	/* multiframe */
+	if (m)
+		goto multiframe;
+
+	/* restart timer */
+	if ((int)(hc->timeout_tl.expires-jiffies) < 5*HZ || !hc->timeout_on) {
+		hc->timeout_on = 1;
+		del_timer(&hc->timeout_tl);
+		hc->timeout_tl.expires = jiffies + L1OIP_TIMEOUT*HZ;
+		add_timer(&hc->timeout_tl);
+	} else /* only adjust timer */
+		hc->timeout_tl.expires = jiffies + L1OIP_TIMEOUT*HZ;
+
+	/* if ip or source port changes */
+	if ((hc->sin_remote.sin_addr.s_addr != sin->sin_addr.s_addr)
+	 || (hc->sin_remote.sin_port != sin->sin_port)) {
+		if (debug & DEBUG_L1OIP_SOCKET)
+			printk(KERN_DEBUG "%s: remote address changes from "
+				"0x%08x to 0x%08x (port %d to %d)\n", __func__,
+				ntohl(hc->sin_remote.sin_addr.s_addr),
+				ntohl(sin->sin_addr.s_addr),
+				ntohs(hc->sin_remote.sin_port),
+				ntohs(sin->sin_port));
+		hc->sin_remote.sin_addr.s_addr = sin->sin_addr.s_addr;
+		hc->sin_remote.sin_port = sin->sin_port;
+	}
+}
+
+
+/*
+ * socket stuff
+ */
+static int
+l1oip_socket_thread(void *data)
+{
+	struct l1oip *hc = (struct l1oip *)data;
+	int ret = 0;
+	struct msghdr msg;
+	struct iovec iov;
+	mm_segment_t oldfs;
+	struct sockaddr_in sin_rx;
+	unsigned char recvbuf[1500];
+	int recvlen;
+	struct socket *socket = NULL;
+	DECLARE_COMPLETION(wait);
+
+	/* make daemon */
+	allow_signal(SIGTERM);
+
+	/* create socket */
+	if (sock_create(PF_INET, SOCK_DGRAM, IPPROTO_UDP, &socket)) {
+		printk(KERN_ERR "%s: Failed to create socket.\n", __func__);
+		return -EIO;
+	}
+
+	/* set incoming address */
+	hc->sin_local.sin_family = AF_INET;
+	hc->sin_local.sin_addr.s_addr = INADDR_ANY;
+	hc->sin_local.sin_port = htons((unsigned short)hc->localport);
+
+	/* set outgoing address */
+	hc->sin_remote.sin_family = AF_INET;
+	hc->sin_remote.sin_addr.s_addr = htonl(hc->remoteip);
+	hc->sin_remote.sin_port = htons((unsigned short)hc->remoteport);
+
+	/* bind to incomming port */
+	if (socket->ops->bind(socket, (struct sockaddr *)&hc->sin_local,
+	    sizeof(hc->sin_local))) {
+		printk(KERN_ERR "%s: Failed to bind socket to port %d.\n",
+			__func__, hc->localport);
+		ret = -EINVAL;
+		goto fail;
+	}
+
+	/* check sk */
+	if (socket->sk == NULL) {
+		printk(KERN_ERR "%s: socket->sk == NULL\n", __func__);
+		ret = -EIO;
+		goto fail;
+	}
+
+	/* build receive message */
+	msg.msg_name = &sin_rx;
+	msg.msg_namelen = sizeof(sin_rx);
+	msg.msg_control = NULL;
+	msg.msg_controllen = 0;
+	msg.msg_iov = &iov;
+	msg.msg_iovlen = 1;
+
+	/* build send message */
+	hc->sendmsg.msg_name = &hc->sin_remote;
+	hc->sendmsg.msg_namelen = sizeof(hc->sin_remote);
+	hc->sendmsg.msg_control = NULL;
+	hc->sendmsg.msg_controllen = 0;
+	hc->sendmsg.msg_iov    = &hc->sendiov;
+	hc->sendmsg.msg_iovlen = 1;
+
+	/* give away socket */
+	spin_lock(&hc->socket_lock);
+	hc->socket = socket;
+	spin_unlock(&hc->socket_lock);
+
+	/* read loop */
+	if (debug & DEBUG_L1OIP_SOCKET)
+		printk(KERN_DEBUG "%s: socket created and open\n",
+			__func__);
+	while (!signal_pending(current)) {
+		iov.iov_base = recvbuf;
+		iov.iov_len = sizeof(recvbuf);
+		oldfs = get_fs();
+		set_fs(KERNEL_DS);
+		recvlen = sock_recvmsg(socket, &msg, sizeof(recvbuf), 0);
+		set_fs(oldfs);
+		if (recvlen > 0) {
+			l1oip_socket_parse(hc, &sin_rx, recvbuf, recvlen);
+		} else {
+			if (debug & DEBUG_L1OIP_SOCKET)
+			    printk(KERN_WARNING "%s: broken pipe on socket\n",
+				__func__);
+		}
+	}
+
+	/* get socket back, check first if in use, maybe by send function */
+	spin_lock(&hc->socket_lock);
+	/* if hc->socket is NULL, it is in use until it is given back */
+	while (!hc->socket) {
+		spin_unlock(&hc->socket_lock);
+		schedule_timeout(HZ/10);
+		spin_lock(&hc->socket_lock);
+	}
+	hc->socket = NULL;
+	spin_unlock(&hc->socket_lock);
+
+	if (debug & DEBUG_L1OIP_SOCKET)
+		printk(KERN_DEBUG "%s: socket thread terminating\n",
+			__func__);
+
+fail:
+	/* close socket */
+	if (socket)
+		sock_release(socket);
+
+	/* if we got killed, signal completion */
+	complete(&hc->socket_complete);
+	hc->socket_thread = NULL; /* show termination of thread */
+
+	if (debug & DEBUG_L1OIP_SOCKET)
+		printk(KERN_DEBUG "%s: socket thread terminated\n",
+			__func__);
+	return ret;
+}
+
+static void
+l1oip_socket_close(struct l1oip *hc)
+{
+	/* kill thread */
+	if (hc->socket_thread) {
+		if (debug & DEBUG_L1OIP_SOCKET)
+			printk(KERN_DEBUG "%s: socket thread exists, "
+				"killing...\n", __func__);
+		send_sig(SIGTERM, hc->socket_thread, 0);
+		wait_for_completion(&hc->socket_complete);
+	}
+}
+
+static int
+l1oip_socket_open(struct l1oip *hc)
+{
+	/* in case of reopen, we need to close first */
+	l1oip_socket_close(hc);
+
+	init_completion(&hc->socket_complete);
+
+	/* create receive process */
+	hc->socket_thread = kthread_run(l1oip_socket_thread, hc, "l1oip_%s",
+		hc->name);
+	if (IS_ERR(hc->socket_thread)) {
+		int err = PTR_ERR(hc->socket_thread);
+		printk(KERN_ERR "%s: Failed (%d) to create socket process.\n",
+			__func__, err);
+		hc->socket_thread = NULL;
+		sock_release(hc->socket);
+		return err;
+	}
+	if (debug & DEBUG_L1OIP_SOCKET)
+		printk(KERN_DEBUG "%s: socket thread created\n", __func__);
+
+	return 0;
+}
+
+
+static void
+l1oip_send_bh(struct work_struct *work)
+{
+	struct l1oip *hc = container_of(work, struct l1oip, workq);
+
+	if (debug & (DEBUG_L1OIP_MSG|DEBUG_L1OIP_SOCKET))
+		printk(KERN_DEBUG "%s: keepalive timer expired, sending empty "
+			"frame on dchannel\n", __func__);
+
+	/* send an empty l1oip frame at D-channel */
+	l1oip_socket_send(hc, 0, hc->d_idx, 0, 0, NULL, 0);
+}
+
+
+/*
+ * timer stuff
+ */
+static void
+l1oip_keepalive(void *data)
+{
+	struct l1oip *hc = (struct l1oip *)data;
+
+	schedule_work(&hc->workq);
+}
+
+static void
+l1oip_timeout(void *data)
+{
+	struct l1oip			*hc = (struct l1oip *)data;
+	struct dchannel		*dch = hc->chan[hc->d_idx].dch;
+
+	if (debug & DEBUG_L1OIP_MSG)
+		printk(KERN_DEBUG "%s: timeout timer expired, turn layer one "
+			"down.\n", __func__);
+
+	hc->timeout_on = 0; /* state that timer must be initialized next time */
+
+	/* if timeout, we send up a PH_DEACTIVATE and deactivate */
+	if (test_bit(FLG_ACTIVE, &dch->Flags)) {
+		if (debug & (DEBUG_L1OIP_MSG|DEBUG_L1OIP_SOCKET))
+			printk(KERN_DEBUG "%s: interface become deactivated "
+				"due to timeout\n", __func__);
+		test_and_clear_bit(FLG_ACTIVE, &dch->Flags);
+		_queue_data(&dch->dev.D, PH_DEACTIVATE_IND, MISDN_ID_ANY, 0,
+			NULL, GFP_ATOMIC);
+	}
+
+	/* if we have ondemand set, we remove ip address */
+	if (hc->ondemand) {
+		if (debug & DEBUG_L1OIP_MSG)
+			printk(KERN_DEBUG "%s: on demand causes ip address to "
+				"be removed\n", __func__);
+		hc->sin_remote.sin_addr.s_addr = 0;
+	}
+}
+
+
+/*
+ * message handling
+ */
+static int
+handle_dmsg(struct mISDNchannel *ch, struct sk_buff *skb)
+{
+	struct mISDNdevice	*dev = container_of(ch, struct mISDNdevice, D);
+	struct dchannel		*dch = container_of(dev, struct dchannel, dev);
+	struct l1oip			*hc = dch->hw;
+	struct mISDNhead	*hh = mISDN_HEAD_P(skb);
+	int			ret = -EINVAL;
+	int			l, ll;
+	unsigned char		*p;
+
+	switch (hh->prim) {
+	case PH_DATA_REQ:
+		if (skb->len < 1) {
+			printk(KERN_WARNING "%s: skb too small\n",
+				__func__);
+			break;
+		}
+		if (skb->len > MAX_DFRAME_LEN_L1 || skb->len > L1OIP_MAX_LEN) {
+			printk(KERN_WARNING "%s: skb too large\n",
+				__func__);
+			break;
+		}
+		/* send frame */
+		p = skb->data;
+		l = skb->len;
+		while (l) {
+			ll = (l < L1OIP_MAX_PERFRAME)?l:L1OIP_MAX_PERFRAME;
+			l1oip_socket_send(hc, 0, dch->slot, 0,
+				hc->chan[dch->slot].tx_counter++, p, ll);
+			p += ll;
+			l -= ll;
+		}
+		skb_trim(skb, 0);
+		queue_ch_frame(ch, PH_DATA_CNF, hh->id, skb);
+		return 0;
+	case PH_ACTIVATE_REQ:
+		if (debug & (DEBUG_L1OIP_MSG|DEBUG_L1OIP_SOCKET))
+			printk(KERN_DEBUG "%s: PH_ACTIVATE channel %d (1..%d)\n"
+				, __func__, dch->slot, hc->b_num+1);
+		skb_trim(skb, 0);
+		if (test_bit(FLG_ACTIVE, &dch->Flags))
+			queue_ch_frame(ch, PH_ACTIVATE_IND, hh->id, skb);
+		else
+			queue_ch_frame(ch, PH_DEACTIVATE_IND, hh->id, skb);
+		return 0;
+	case PH_DEACTIVATE_REQ:
+		if (debug & (DEBUG_L1OIP_MSG|DEBUG_L1OIP_SOCKET))
+			printk(KERN_DEBUG "%s: PH_DEACTIVATE channel %d "
+				"(1..%d)\n", __func__, dch->slot,
+				hc->b_num+1);
+		skb_trim(skb, 0);
+		if (test_bit(FLG_ACTIVE, &dch->Flags))
+			queue_ch_frame(ch, PH_ACTIVATE_IND, hh->id, skb);
+		else
+			queue_ch_frame(ch, PH_DEACTIVATE_IND, hh->id, skb);
+		return 0;
+	}
+	if (!ret)
+		dev_kfree_skb(skb);
+	return ret;
+}
+
+static int
+channel_dctrl(struct dchannel *dch, struct mISDN_ctrl_req *cq)
+{
+	int	ret = 0;
+	struct l1oip	*hc = dch->hw;
+
+	switch (cq->op) {
+	case MISDN_CTRL_GETOP:
+		cq->op = MISDN_CTRL_SETPEER | MISDN_CTRL_UNSETPEER;
+		break;
+	case MISDN_CTRL_SETPEER:
+		hc->remoteip = (u32)cq->p1;
+		hc->remoteport = cq->p2 & 0xffff;
+		hc->localport = cq->p2 >> 16;
+		if (!hc->remoteport)
+			hc->remoteport = hc->localport;
+		if (debug & DEBUG_L1OIP_SOCKET)
+			printk(KERN_DEBUG "%s: got new ip address from user "
+				"space.\n", __func__);
+			l1oip_socket_open(hc);
+		break;
+	case MISDN_CTRL_UNSETPEER:
+		if (debug & DEBUG_L1OIP_SOCKET)
+			printk(KERN_DEBUG "%s: removing ip address.\n",
+				__func__);
+		hc->remoteip = 0;
+		l1oip_socket_open(hc);
+		break;
+	default:
+		printk(KERN_WARNING "%s: unknown Op %x\n",
+		    __func__, cq->op);
+		ret = -EINVAL;
+		break;
+	}
+	return ret;
+}
+
+static int
+open_dchannel(struct l1oip *hc, struct dchannel *dch, struct channel_req *rq)
+{
+	if (debug & DEBUG_HW_OPEN)
+		printk(KERN_DEBUG "%s: dev(%d) open from %p\n", __func__,
+		    dch->dev.id, __builtin_return_address(0));
+	if (rq->protocol == ISDN_P_NONE)
+		return -EINVAL;
+	if ((dch->dev.D.protocol != ISDN_P_NONE) &&
+	    (dch->dev.D.protocol != rq->protocol)) {
+		if (debug & DEBUG_HW_OPEN)
+			printk(KERN_WARNING "%s: change protocol %x to %x\n",
+			__func__, dch->dev.D.protocol, rq->protocol);
+	}
+	if (dch->dev.D.protocol != rq->protocol)
+		dch->dev.D.protocol = rq->protocol;
+
+	if (test_bit(FLG_ACTIVE, &dch->Flags)) {
+		_queue_data(&dch->dev.D, PH_ACTIVATE_IND, MISDN_ID_ANY,
+		    0, NULL, GFP_KERNEL);
+	}
+	rq->ch = &dch->dev.D;
+	if (!try_module_get(THIS_MODULE))
+		printk(KERN_WARNING "%s:cannot get module\n", __func__);
+	return 0;
+}
+
+static int
+open_bchannel(struct l1oip *hc, struct dchannel *dch, struct channel_req *rq)
+{
+	struct bchannel	*bch;
+	int		ch;
+
+	if (!test_channelmap(rq->adr.channel, dch->dev.channelmap))
+		return -EINVAL;
+	if (rq->protocol == ISDN_P_NONE)
+		return -EINVAL;
+	ch = rq->adr.channel; /* BRI: 1=B1 2=B2  PRI: 1..15,17.. */
+	bch = hc->chan[ch].bch;
+	if (!bch) {
+		printk(KERN_ERR "%s:internal error ch %d has no bch\n",
+		    __func__, ch);
+		return -EINVAL;
+	}
+	if (test_and_set_bit(FLG_OPEN, &bch->Flags))
+		return -EBUSY; /* b-channel can be only open once */
+	bch->ch.protocol = rq->protocol;
+	rq->ch = &bch->ch;
+	if (!try_module_get(THIS_MODULE))
+		printk(KERN_WARNING "%s:cannot get module\n", __func__);
+	return 0;
+}
+
+static int
+l1oip_dctrl(struct mISDNchannel *ch, u_int cmd, void *arg)
+{
+	struct mISDNdevice	*dev = container_of(ch, struct mISDNdevice, D);
+	struct dchannel		*dch = container_of(dev, struct dchannel, dev);
+	struct l1oip			*hc = dch->hw;
+	struct channel_req	*rq;
+	int			err = 0;
+
+	if (dch->debug & DEBUG_HW)
+		printk(KERN_DEBUG "%s: cmd:%x %p\n",
+		    __func__, cmd, arg);
+	switch (cmd) {
+	case OPEN_CHANNEL:
+		rq = arg;
+		switch (rq->protocol) {
+		case ISDN_P_TE_S0:
+		case ISDN_P_NT_S0:
+			if (hc->pri) {
+				err = -EINVAL;
+				break;
+			}
+			err = open_dchannel(hc, dch, rq);
+			break;
+		case ISDN_P_TE_E1:
+		case ISDN_P_NT_E1:
+			if (!hc->pri) {
+				err = -EINVAL;
+				break;
+			}
+			err = open_dchannel(hc, dch, rq);
+			break;
+		default:
+			err = open_bchannel(hc, dch, rq);
+		}
+		break;
+	case CLOSE_CHANNEL:
+		if (debug & DEBUG_HW_OPEN)
+			printk(KERN_DEBUG "%s: dev(%d) close from %p\n",
+			    __func__, dch->dev.id,
+			    __builtin_return_address(0));
+		module_put(THIS_MODULE);
+		break;
+	case CONTROL_CHANNEL:
+		err = channel_dctrl(dch, arg);
+		break;
+	default:
+		if (dch->debug & DEBUG_HW)
+			printk(KERN_DEBUG "%s: unknown command %x\n",
+			    __func__, cmd);
+		err = -EINVAL;
+	}
+	return err;
+}
+
+static int
+handle_bmsg(struct mISDNchannel *ch, struct sk_buff *skb)
+{
+	struct bchannel		*bch = container_of(ch, struct bchannel, ch);
+	struct l1oip			*hc = bch->hw;
+	int			ret = -EINVAL;
+	struct mISDNhead	*hh = mISDN_HEAD_P(skb);
+	int			l, ll, i;
+	unsigned char		*p;
+
+	switch (hh->prim) {
+	case PH_DATA_REQ:
+		if (skb->len <= 0) {
+			printk(KERN_WARNING "%s: skb too small\n",
+				__func__);
+			break;
+		}
+		if (skb->len > MAX_DFRAME_LEN_L1 || skb->len > L1OIP_MAX_LEN) {
+			printk(KERN_WARNING "%s: skb too large\n",
+				__func__);
+			break;
+		}
+		/* check for AIS / ulaw-silence */
+		p = skb->data;
+		l = skb->len;
+		for (i = 0; i < l; i++) {
+			if (*p++ != 0xff)
+				break;
+		}
+		if (i == l) {
+			if (debug & DEBUG_L1OIP_MSG)
+				printk(KERN_DEBUG "%s: got AIS, not sending, "
+					"but counting\n", __func__);
+			hc->chan[bch->slot].tx_counter += l;
+			skb_trim(skb, 0);
+			queue_ch_frame(ch, PH_DATA_CNF, hh->id, skb);
+			return 0;
+		}
+		/* check for silence */
+		p = skb->data;
+		l = skb->len;
+		for (i = 0; i < l; i++) {
+			if (*p++ != 0x2a)
+				break;
+		}
+		if (i == l) {
+			if (debug & DEBUG_L1OIP_MSG)
+				printk(KERN_DEBUG "%s: got silence, not sending"
+					", but counting\n", __func__);
+			hc->chan[bch->slot].tx_counter += l;
+			skb_trim(skb, 0);
+			queue_ch_frame(ch, PH_DATA_CNF, hh->id, skb);
+			return 0;
+		}
+
+		/* send frame */
+		p = skb->data;
+		l = skb->len;
+		while (l) {
+			ll = (l < L1OIP_MAX_PERFRAME)?l:L1OIP_MAX_PERFRAME;
+			l1oip_socket_send(hc, hc->codec, bch->slot, 0,
+				hc->chan[bch->slot].tx_counter, p, ll);
+			hc->chan[bch->slot].tx_counter += ll;
+			p += ll;
+			l -= ll;
+		}
+		skb_trim(skb, 0);
+		queue_ch_frame(ch, PH_DATA_CNF, hh->id, skb);
+		return 0;
+	case PH_ACTIVATE_REQ:
+		if (debug & (DEBUG_L1OIP_MSG|DEBUG_L1OIP_SOCKET))
+			printk(KERN_DEBUG "%s: PH_ACTIVATE channel %d (1..%d)\n"
+				, __func__, bch->slot, hc->b_num+1);
+		hc->chan[bch->slot].codecstate = 0;
+		test_and_set_bit(FLG_ACTIVE, &bch->Flags);
+		skb_trim(skb, 0);
+		queue_ch_frame(ch, PH_ACTIVATE_IND, hh->id, skb);
+		return 0;
+	case PH_DEACTIVATE_REQ:
+		if (debug & (DEBUG_L1OIP_MSG|DEBUG_L1OIP_SOCKET))
+			printk(KERN_DEBUG "%s: PH_DEACTIVATE channel %d "
+				"(1..%d)\n", __func__, bch->slot,
+				hc->b_num+1);
+		test_and_clear_bit(FLG_ACTIVE, &bch->Flags);
+		skb_trim(skb, 0);
+		queue_ch_frame(ch, PH_DEACTIVATE_IND, hh->id, skb);
+		return 0;
+	}
+	if (!ret)
+		dev_kfree_skb(skb);
+	return ret;
+}
+
+static int
+channel_bctrl(struct bchannel *bch, struct mISDN_ctrl_req *cq)
+{
+	int			ret = 0;
+	struct dsp_features	*features =
+		(struct dsp_features *)(*((u_long *)&cq->p1));
+
+	switch (cq->op) {
+	case MISDN_CTRL_GETOP:
+		cq->op = MISDN_CTRL_HW_FEATURES_OP;
+		break;
+	case MISDN_CTRL_HW_FEATURES: /* fill features structure */
+		if (debug & DEBUG_L1OIP_MSG)
+			printk(KERN_DEBUG "%s: HW_FEATURE request\n",
+			    __func__);
+		/* create confirm */
+		features->unclocked = 1;
+		features->unordered = 1;
+		break;
+	default:
+		printk(KERN_WARNING "%s: unknown Op %x\n",
+		    __func__, cq->op);
+		ret = -EINVAL;
+		break;
+	}
+	return ret;
+}
+
+static int
+l1oip_bctrl(struct mISDNchannel *ch, u_int cmd, void *arg)
+{
+	struct bchannel	*bch = container_of(ch, struct bchannel, ch);
+	int		err = -EINVAL;
+
+	if (bch->debug & DEBUG_HW)
+		printk(KERN_DEBUG "%s: cmd:%x %p\n",
+		    __func__, cmd, arg);
+	switch (cmd) {
+	case CLOSE_CHANNEL:
+		test_and_clear_bit(FLG_OPEN, &bch->Flags);
+		test_and_clear_bit(FLG_ACTIVE, &bch->Flags);
+		ch->protocol = ISDN_P_NONE;
+		ch->peer = NULL;
+		module_put(THIS_MODULE);
+		err = 0;
+		break;
+	case CONTROL_CHANNEL:
+		err = channel_bctrl(bch, arg);
+		break;
+	default:
+		printk(KERN_WARNING "%s: unknown prim(%x)\n",
+			__func__, cmd);
+	}
+	return err;
+}
+
+
+/*
+ * cleanup module and stack
+ */
+static void
+release_card(struct l1oip *hc)
+{
+	int	ch;
+
+	if (timer_pending(&hc->keep_tl))
+		del_timer(&hc->keep_tl);
+
+	if (timer_pending(&hc->timeout_tl))
+		del_timer(&hc->timeout_tl);
+
+	if (hc->socket_thread)
+		l1oip_socket_close(hc);
+
+	if (hc->registered && hc->chan[hc->d_idx].dch)
+		mISDN_unregister_device(&hc->chan[hc->d_idx].dch->dev);
+	for (ch = 0; ch < 128; ch++) {
+		if (hc->chan[ch].dch) {
+			mISDN_freedchannel(hc->chan[ch].dch);
+			kfree(hc->chan[ch].dch);
+		}
+		if (hc->chan[ch].bch) {
+			mISDN_freebchannel(hc->chan[ch].bch);
+			kfree(hc->chan[ch].bch);
+#ifdef REORDER_DEBUG
+			if (hc->chan[ch].disorder_skb)
+				dev_kfree_skb(hc->chan[ch].disorder_skb);
+#endif
+		}
+	}
+
+	spin_lock(&l1oip_lock);
+	list_del(&hc->list);
+	spin_unlock(&l1oip_lock);
+
+	kfree(hc);
+}
+
+static void
+l1oip_cleanup(void)
+{
+	struct l1oip *hc, *next;
+
+	list_for_each_entry_safe(hc, next, &l1oip_ilist, list)
+		release_card(hc);
+
+	l1oip_4bit_free();
+}
+
+
+/*
+ * module and stack init
+ */
+static int
+init_card(struct l1oip *hc, int pri, int bundle)
+{
+	struct dchannel	*dch;
+	struct bchannel	*bch;
+	int		ret;
+	int		i, ch;
+
+	spin_lock_init(&hc->socket_lock);
+	hc->idx = l1oip_cnt;
+	hc->pri = pri;
+	hc->d_idx = pri?16:3;
+	hc->b_num = pri?30:2;
+	hc->bundle = bundle;
+	if (hc->pri)
+		sprintf(hc->name, "l1oip-e1.%d", l1oip_cnt + 1);
+	else
+		sprintf(hc->name, "l1oip-s0.%d", l1oip_cnt + 1);
+
+	switch (codec[l1oip_cnt]) {
+	case 0: /* as is */
+	case 1: /* alaw */
+	case 2: /* ulaw */
+	case 3: /* 4bit */
+		break;
+	default:
+		printk(KERN_ERR "Codec(%d) not supported.\n",
+			codec[l1oip_cnt]);
+		return -EINVAL;
+	}
+	hc->codec = codec[l1oip_cnt];
+	if (debug & DEBUG_L1OIP_INIT)
+		printk(KERN_DEBUG "%s: using codec %d\n",
+			__func__, hc->codec);
+
+	if (id[l1oip_cnt] == 0) {
+		printk(KERN_WARNING "Warning: No 'id' value given or "
+			"0, this is highly unsecure. Please use 32 "
+			"bit randmom number 0x...\n");
+	}
+	hc->id = id[l1oip_cnt];
+	if (debug & DEBUG_L1OIP_INIT)
+		printk(KERN_DEBUG "%s: using id 0x%x\n", __func__, hc->id);
+
+	hc->ondemand = ondemand[l1oip_cnt];
+	if (hc->ondemand && !hc->id) {
+		printk(KERN_ERR "%s: ondemand option only allowed in "
+			"conjunction with non 0 ID\n", __func__);
+		return -EINVAL;
+	}
+
+	if (limit[l1oip_cnt])
+		hc->b_num = limit[l1oip_cnt];
+	if (!pri && hc->b_num > 2) {
+		printk(KERN_ERR "Maximum limit for BRI interface is 2 "
+			"channels.\n");
+		return -EINVAL;
+	}
+	if (pri && hc->b_num > 126) {
+		printk(KERN_ERR "Maximum limit for PRI interface is 126 "
+			"channels.\n");
+		return -EINVAL;
+	}
+	if (pri && hc->b_num > 30) {
+		printk(KERN_WARNING "Maximum limit for BRI interface is 30 "
+			"channels.\n");
+		printk(KERN_WARNING "Your selection of %d channels must be "
+			"supported by application.\n", hc->limit);
+	}
+
+	hc->remoteip = ip[l1oip_cnt<<2] << 24
+		     | ip[(l1oip_cnt<<2)+1] << 16
+		     | ip[(l1oip_cnt<<2)+2] << 8
+		     | ip[(l1oip_cnt<<2)+3];
+	hc->localport = port[l1oip_cnt]?:(L1OIP_DEFAULTPORT+l1oip_cnt);
+	if (remoteport[l1oip_cnt])
+		hc->remoteport = remoteport[l1oip_cnt];
+	else
+		hc->remoteport = hc->localport;
+	if (debug & DEBUG_L1OIP_INIT)
+		printk(KERN_DEBUG "%s: using local port %d remote ip "
+			"%d.%d.%d.%d port %d ondemand %d\n", __func__,
+			hc->localport, hc->remoteip >> 24,
+			(hc->remoteip >> 16) & 0xff,
+			(hc->remoteip >> 8) & 0xff, hc->remoteip & 0xff,
+			hc->remoteport, hc->ondemand);
+
+	dch = kzalloc(sizeof(struct dchannel), GFP_KERNEL);
+	if (!dch)
+		return -ENOMEM;
+	dch->debug = debug;
+	mISDN_initdchannel(dch, MAX_DFRAME_LEN_L1, NULL);
+	dch->hw = hc;
+	if (pri)
+		dch->dev.Dprotocols = (1 << ISDN_P_TE_E1) | (1 << ISDN_P_NT_E1);
+	else
+		dch->dev.Dprotocols = (1 << ISDN_P_TE_S0) | (1 << ISDN_P_NT_S0);
+	dch->dev.Bprotocols = (1 << (ISDN_P_B_RAW & ISDN_P_B_MASK)) |
+	    (1 << (ISDN_P_B_HDLC & ISDN_P_B_MASK));
+	dch->dev.D.send = handle_dmsg;
+	dch->dev.D.ctrl = l1oip_dctrl;
+	dch->dev.nrbchan = hc->b_num;
+	dch->slot = hc->d_idx;
+	hc->chan[hc->d_idx].dch = dch;
+	i = 1;
+	for (ch = 0; ch < dch->dev.nrbchan; ch++) {
+		if (ch == 15)
+			i++;
+		bch = kzalloc(sizeof(struct bchannel), GFP_KERNEL);
+		if (!bch) {
+			printk(KERN_ERR "%s: no memory for bchannel\n",
+			    __func__);
+			return -ENOMEM;
+		}
+		bch->nr = i + ch;
+		bch->slot = i + ch;
+		bch->debug = debug;
+		mISDN_initbchannel(bch, MAX_DATA_MEM);
+		bch->hw = hc;
+		bch->ch.send = handle_bmsg;
+		bch->ch.ctrl = l1oip_bctrl;
+		bch->ch.nr = i + ch;
+		list_add(&bch->ch.list, &dch->dev.bchannels);
+		hc->chan[i + ch].bch = bch;
+		set_channelmap(bch->nr, dch->dev.channelmap);
+	}
+	ret = mISDN_register_device(&dch->dev, hc->name);
+	if (ret)
+		return ret;
+	hc->registered = 1;
+
+	if (debug & DEBUG_L1OIP_INIT)
+		printk(KERN_DEBUG "%s: Setting up network card(%d)\n",
+			__func__, l1oip_cnt + 1);
+	ret = l1oip_socket_open(hc);
+	if (ret)
+		return ret;
+
+	hc->keep_tl.function = (void *)l1oip_keepalive;
+	hc->keep_tl.data = (ulong)hc;
+	init_timer(&hc->keep_tl);
+	hc->keep_tl.expires = jiffies + 2*HZ; /* two seconds first time */
+	add_timer(&hc->keep_tl);
+
+	hc->timeout_tl.function = (void *)l1oip_timeout;
+	hc->timeout_tl.data = (ulong)hc;
+	init_timer(&hc->timeout_tl);
+	hc->timeout_on = 0; /* state that we have timer off */
+
+	return 0;
+}
+
+static int __init
+l1oip_init(void)
+{
+	int		pri, bundle;
+	struct l1oip		*hc;
+	int		ret;
+
+	printk(KERN_INFO "mISDN: Layer-1-over-IP driver Rev. %s\n",
+		l1oip_revision);
+
+	INIT_LIST_HEAD(&l1oip_ilist);
+	spin_lock_init(&l1oip_lock);
+
+	if (l1oip_4bit_alloc(ulaw))
+		return -ENOMEM;
+
+	l1oip_cnt = 0;
+	while (type[l1oip_cnt] && l1oip_cnt < MAX_CARDS) {
+		switch (type[l1oip_cnt] & 0xff) {
+		case 1:
+			pri = 0;
+			bundle = 0;
+			break;
+		case 2:
+			pri = 1;
+			bundle = 0;
+			break;
+		case 3:
+			pri = 0;
+			bundle = 1;
+			break;
+		case 4:
+			pri = 1;
+			bundle = 1;
+			break;
+		default:
+			printk(KERN_ERR "Card type(%d) not supported.\n",
+				type[l1oip_cnt] & 0xff);
+			l1oip_cleanup();
+			return -EINVAL;
+		}
+
+		if (debug & DEBUG_L1OIP_INIT)
+			printk(KERN_DEBUG "%s: interface %d is %s with %s.\n",
+				__func__, l1oip_cnt, pri?"PRI":"BRI",
+				bundle?"bundled IP packet for all B-channels"
+				 :"seperate IP packets for every B-channel");
+
+		hc = kzalloc(sizeof(struct l1oip), GFP_ATOMIC);
+		if (!hc) {
+			printk(KERN_ERR "No kmem for L1-over-IP driver.\n");
+			l1oip_cleanup();
+			return -ENOMEM;
+		}
+		INIT_WORK(&hc->workq, (void *)l1oip_send_bh);
+
+		spin_lock(&l1oip_lock);
+		list_add_tail(&hc->list, &l1oip_ilist);
+		spin_unlock(&l1oip_lock);
+
+		ret = init_card(hc, pri, bundle);
+		if (ret) {
+			l1oip_cleanup();
+			return ret;
+		}
+
+		l1oip_cnt++;
+	}
+	printk(KERN_INFO "%d virtual devices registered\n", l1oip_cnt);
+	return 0;
+}
+
+module_init(l1oip_init);
+module_exit(l1oip_cleanup);
+
diff --git a/drivers/isdn/mISDN/layer1.c b/drivers/isdn/mISDN/layer1.c
new file mode 100644
index 000000000000..fced1a2755f8
--- /dev/null
+++ b/drivers/isdn/mISDN/layer1.c
@@ -0,0 +1,403 @@
+/*
+ *
+ * Author	Karsten Keil <kkeil@novell.com>
+ *
+ * Copyright 2008  by Karsten Keil <kkeil@novell.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+
+
+#include <linux/module.h>
+#include <linux/mISDNhw.h>
+#include "layer1.h"
+#include "fsm.h"
+
+static int *debug;
+
+struct layer1 {
+	u_long			Flags;
+	struct FsmInst		l1m;
+	struct FsmTimer 	timer;
+	int			delay;
+	struct dchannel		*dch;
+	dchannel_l1callback	*dcb;
+};
+
+#define TIMER3_VALUE 7000
+
+static
+struct Fsm l1fsm_s = {NULL, 0, 0, NULL, NULL};
+
+enum {
+	ST_L1_F2,
+	ST_L1_F3,
+	ST_L1_F4,
+	ST_L1_F5,
+	ST_L1_F6,
+	ST_L1_F7,
+	ST_L1_F8,
+};
+
+#define L1S_STATE_COUNT (ST_L1_F8+1)
+
+static char *strL1SState[] =
+{
+	"ST_L1_F2",
+	"ST_L1_F3",
+	"ST_L1_F4",
+	"ST_L1_F5",
+	"ST_L1_F6",
+	"ST_L1_F7",
+	"ST_L1_F8",
+};
+
+enum {
+	EV_PH_ACTIVATE,
+	EV_PH_DEACTIVATE,
+	EV_RESET_IND,
+	EV_DEACT_CNF,
+	EV_DEACT_IND,
+	EV_POWER_UP,
+	EV_ANYSIG_IND,
+	EV_INFO2_IND,
+	EV_INFO4_IND,
+	EV_TIMER_DEACT,
+	EV_TIMER_ACT,
+	EV_TIMER3,
+};
+
+#define L1_EVENT_COUNT (EV_TIMER3 + 1)
+
+static char *strL1Event[] =
+{
+	"EV_PH_ACTIVATE",
+	"EV_PH_DEACTIVATE",
+	"EV_RESET_IND",
+	"EV_DEACT_CNF",
+	"EV_DEACT_IND",
+	"EV_POWER_UP",
+	"EV_ANYSIG_IND",
+	"EV_INFO2_IND",
+	"EV_INFO4_IND",
+	"EV_TIMER_DEACT",
+	"EV_TIMER_ACT",
+	"EV_TIMER3",
+};
+
+static void
+l1m_debug(struct FsmInst *fi, char *fmt, ...)
+{
+	struct layer1 *l1 = fi->userdata;
+	va_list va;
+
+	va_start(va, fmt);
+	printk(KERN_DEBUG "%s: ", l1->dch->dev.name);
+	vprintk(fmt, va);
+	printk("\n");
+	va_end(va);
+}
+
+static void
+l1_reset(struct FsmInst *fi, int event, void *arg)
+{
+	mISDN_FsmChangeState(fi, ST_L1_F3);
+}
+
+static void
+l1_deact_cnf(struct FsmInst *fi, int event, void *arg)
+{
+	struct layer1 *l1 = fi->userdata;
+
+	mISDN_FsmChangeState(fi, ST_L1_F3);
+	if (test_bit(FLG_L1_ACTIVATING, &l1->Flags))
+		l1->dcb(l1->dch, HW_POWERUP_REQ);
+}
+
+static void
+l1_deact_req_s(struct FsmInst *fi, int event, void *arg)
+{
+	struct layer1 *l1 = fi->userdata;
+
+	mISDN_FsmChangeState(fi, ST_L1_F3);
+	mISDN_FsmRestartTimer(&l1->timer, 550, EV_TIMER_DEACT, NULL, 2);
+	test_and_set_bit(FLG_L1_DEACTTIMER, &l1->Flags);
+}
+
+static void
+l1_power_up_s(struct FsmInst *fi, int event, void *arg)
+{
+	struct layer1 *l1 = fi->userdata;
+
+	if (test_bit(FLG_L1_ACTIVATING, &l1->Flags)) {
+		mISDN_FsmChangeState(fi, ST_L1_F4);
+		l1->dcb(l1->dch, INFO3_P8);
+	} else
+		mISDN_FsmChangeState(fi, ST_L1_F3);
+}
+
+static void
+l1_go_F5(struct FsmInst *fi, int event, void *arg)
+{
+	mISDN_FsmChangeState(fi, ST_L1_F5);
+}
+
+static void
+l1_go_F8(struct FsmInst *fi, int event, void *arg)
+{
+	mISDN_FsmChangeState(fi, ST_L1_F8);
+}
+
+static void
+l1_info2_ind(struct FsmInst *fi, int event, void *arg)
+{
+	struct layer1 *l1 = fi->userdata;
+
+	mISDN_FsmChangeState(fi, ST_L1_F6);
+	l1->dcb(l1->dch, INFO3_P8);
+}
+
+static void
+l1_info4_ind(struct FsmInst *fi, int event, void *arg)
+{
+	struct layer1 *l1 = fi->userdata;
+
+	mISDN_FsmChangeState(fi, ST_L1_F7);
+	l1->dcb(l1->dch, INFO3_P8);
+	if (test_and_clear_bit(FLG_L1_DEACTTIMER, &l1->Flags))
+		mISDN_FsmDelTimer(&l1->timer, 4);
+	if (!test_bit(FLG_L1_ACTIVATED, &l1->Flags)) {
+		if (test_and_clear_bit(FLG_L1_T3RUN, &l1->Flags))
+			mISDN_FsmDelTimer(&l1->timer, 3);
+		mISDN_FsmRestartTimer(&l1->timer, 110, EV_TIMER_ACT, NULL, 2);
+		test_and_set_bit(FLG_L1_ACTTIMER, &l1->Flags);
+	}
+}
+
+static void
+l1_timer3(struct FsmInst *fi, int event, void *arg)
+{
+	struct layer1 *l1 = fi->userdata;
+
+	test_and_clear_bit(FLG_L1_T3RUN, &l1->Flags);
+	if (test_and_clear_bit(FLG_L1_ACTIVATING, &l1->Flags)) {
+		if (test_and_clear_bit(FLG_L1_DBLOCKED, &l1->Flags))
+			l1->dcb(l1->dch, HW_D_NOBLOCKED);
+		l1->dcb(l1->dch, PH_DEACTIVATE_IND);
+	}
+	if (l1->l1m.state != ST_L1_F6) {
+		mISDN_FsmChangeState(fi, ST_L1_F3);
+		l1->dcb(l1->dch, HW_POWERUP_REQ);
+	}
+}
+
+static void
+l1_timer_act(struct FsmInst *fi, int event, void *arg)
+{
+	struct layer1 *l1 = fi->userdata;
+
+	test_and_clear_bit(FLG_L1_ACTTIMER, &l1->Flags);
+	test_and_set_bit(FLG_L1_ACTIVATED, &l1->Flags);
+	l1->dcb(l1->dch, PH_ACTIVATE_IND);
+}
+
+static void
+l1_timer_deact(struct FsmInst *fi, int event, void *arg)
+{
+	struct layer1 *l1 = fi->userdata;
+
+	test_and_clear_bit(FLG_L1_DEACTTIMER, &l1->Flags);
+	test_and_clear_bit(FLG_L1_ACTIVATED, &l1->Flags);
+	if (test_and_clear_bit(FLG_L1_DBLOCKED, &l1->Flags))
+		l1->dcb(l1->dch, HW_D_NOBLOCKED);
+	l1->dcb(l1->dch, PH_DEACTIVATE_IND);
+	l1->dcb(l1->dch, HW_DEACT_REQ);
+}
+
+static void
+l1_activate_s(struct FsmInst *fi, int event, void *arg)
+{
+	struct layer1 *l1 = fi->userdata;
+
+	mISDN_FsmRestartTimer(&l1->timer, TIMER3_VALUE, EV_TIMER3, NULL, 2);
+	test_and_set_bit(FLG_L1_T3RUN, &l1->Flags);
+	l1->dcb(l1->dch, HW_RESET_REQ);
+}
+
+static void
+l1_activate_no(struct FsmInst *fi, int event, void *arg)
+{
+	struct layer1 *l1 = fi->userdata;
+
+	if ((!test_bit(FLG_L1_DEACTTIMER, &l1->Flags)) &&
+	    (!test_bit(FLG_L1_T3RUN, &l1->Flags))) {
+		test_and_clear_bit(FLG_L1_ACTIVATING, &l1->Flags);
+		if (test_and_clear_bit(FLG_L1_DBLOCKED, &l1->Flags))
+			l1->dcb(l1->dch, HW_D_NOBLOCKED);
+		l1->dcb(l1->dch, PH_DEACTIVATE_IND);
+	}
+}
+
+static struct FsmNode L1SFnList[] =
+{
+	{ST_L1_F3, EV_PH_ACTIVATE, l1_activate_s},
+	{ST_L1_F6, EV_PH_ACTIVATE, l1_activate_no},
+	{ST_L1_F8, EV_PH_ACTIVATE, l1_activate_no},
+	{ST_L1_F3, EV_RESET_IND, l1_reset},
+	{ST_L1_F4, EV_RESET_IND, l1_reset},
+	{ST_L1_F5, EV_RESET_IND, l1_reset},
+	{ST_L1_F6, EV_RESET_IND, l1_reset},
+	{ST_L1_F7, EV_RESET_IND, l1_reset},
+	{ST_L1_F8, EV_RESET_IND, l1_reset},
+	{ST_L1_F3, EV_DEACT_CNF, l1_deact_cnf},
+	{ST_L1_F4, EV_DEACT_CNF, l1_deact_cnf},
+	{ST_L1_F5, EV_DEACT_CNF, l1_deact_cnf},
+	{ST_L1_F6, EV_DEACT_CNF, l1_deact_cnf},
+	{ST_L1_F7, EV_DEACT_CNF, l1_deact_cnf},
+	{ST_L1_F8, EV_DEACT_CNF, l1_deact_cnf},
+	{ST_L1_F6, EV_DEACT_IND, l1_deact_req_s},
+	{ST_L1_F7, EV_DEACT_IND, l1_deact_req_s},
+	{ST_L1_F8, EV_DEACT_IND, l1_deact_req_s},
+	{ST_L1_F3, EV_POWER_UP,  l1_power_up_s},
+	{ST_L1_F4, EV_ANYSIG_IND, l1_go_F5},
+	{ST_L1_F6, EV_ANYSIG_IND, l1_go_F8},
+	{ST_L1_F7, EV_ANYSIG_IND, l1_go_F8},
+	{ST_L1_F3, EV_INFO2_IND, l1_info2_ind},
+	{ST_L1_F4, EV_INFO2_IND, l1_info2_ind},
+	{ST_L1_F5, EV_INFO2_IND, l1_info2_ind},
+	{ST_L1_F7, EV_INFO2_IND, l1_info2_ind},
+	{ST_L1_F8, EV_INFO2_IND, l1_info2_ind},
+	{ST_L1_F3, EV_INFO4_IND, l1_info4_ind},
+	{ST_L1_F4, EV_INFO4_IND, l1_info4_ind},
+	{ST_L1_F5, EV_INFO4_IND, l1_info4_ind},
+	{ST_L1_F6, EV_INFO4_IND, l1_info4_ind},
+	{ST_L1_F8, EV_INFO4_IND, l1_info4_ind},
+	{ST_L1_F3, EV_TIMER3, l1_timer3},
+	{ST_L1_F4, EV_TIMER3, l1_timer3},
+	{ST_L1_F5, EV_TIMER3, l1_timer3},
+	{ST_L1_F6, EV_TIMER3, l1_timer3},
+	{ST_L1_F8, EV_TIMER3, l1_timer3},
+	{ST_L1_F7, EV_TIMER_ACT, l1_timer_act},
+	{ST_L1_F3, EV_TIMER_DEACT, l1_timer_deact},
+	{ST_L1_F4, EV_TIMER_DEACT, l1_timer_deact},
+	{ST_L1_F5, EV_TIMER_DEACT, l1_timer_deact},
+	{ST_L1_F6, EV_TIMER_DEACT, l1_timer_deact},
+	{ST_L1_F7, EV_TIMER_DEACT, l1_timer_deact},
+	{ST_L1_F8, EV_TIMER_DEACT, l1_timer_deact},
+};
+
+static void
+release_l1(struct layer1 *l1) {
+	mISDN_FsmDelTimer(&l1->timer, 0);
+	if (l1->dch)
+		l1->dch->l1 = NULL;
+	module_put(THIS_MODULE);
+	kfree(l1);
+}
+
+int
+l1_event(struct layer1 *l1, u_int event)
+{
+	int		err = 0;
+
+	if (!l1)
+		return -EINVAL;
+	switch (event) {
+	case HW_RESET_IND:
+		mISDN_FsmEvent(&l1->l1m, EV_RESET_IND, NULL);
+		break;
+	case HW_DEACT_IND:
+		mISDN_FsmEvent(&l1->l1m, EV_DEACT_IND, NULL);
+		break;
+	case HW_POWERUP_IND:
+		mISDN_FsmEvent(&l1->l1m, EV_POWER_UP, NULL);
+		break;
+	case HW_DEACT_CNF:
+		mISDN_FsmEvent(&l1->l1m, EV_DEACT_CNF, NULL);
+		break;
+	case ANYSIGNAL:
+		mISDN_FsmEvent(&l1->l1m, EV_ANYSIG_IND, NULL);
+		break;
+	case LOSTFRAMING:
+		mISDN_FsmEvent(&l1->l1m, EV_ANYSIG_IND, NULL);
+		break;
+	case INFO2:
+		mISDN_FsmEvent(&l1->l1m, EV_INFO2_IND, NULL);
+		break;
+	case INFO4_P8:
+		mISDN_FsmEvent(&l1->l1m, EV_INFO4_IND, NULL);
+		break;
+	case INFO4_P10:
+		mISDN_FsmEvent(&l1->l1m, EV_INFO4_IND, NULL);
+		break;
+	case PH_ACTIVATE_REQ:
+		if (test_bit(FLG_L1_ACTIVATED, &l1->Flags))
+			l1->dcb(l1->dch, PH_ACTIVATE_IND);
+		else {
+			test_and_set_bit(FLG_L1_ACTIVATING, &l1->Flags);
+			mISDN_FsmEvent(&l1->l1m, EV_PH_ACTIVATE, NULL);
+		}
+		break;
+	case CLOSE_CHANNEL:
+		release_l1(l1);
+		break;
+	default:
+		if (*debug & DEBUG_L1)
+			printk(KERN_DEBUG "%s %x unhandled\n",
+			    __func__, event);
+		err = -EINVAL;
+	}
+	return err;
+}
+EXPORT_SYMBOL(l1_event);
+
+int
+create_l1(struct dchannel *dch, dchannel_l1callback *dcb) {
+	struct layer1	*nl1;
+
+	nl1 = kzalloc(sizeof(struct layer1), GFP_ATOMIC);
+	if (!nl1) {
+		printk(KERN_ERR "kmalloc struct layer1 failed\n");
+		return -ENOMEM;
+	}
+	nl1->l1m.fsm = &l1fsm_s;
+	nl1->l1m.state = ST_L1_F3;
+	nl1->Flags = 0;
+	nl1->l1m.debug = *debug & DEBUG_L1_FSM;
+	nl1->l1m.userdata = nl1;
+	nl1->l1m.userint = 0;
+	nl1->l1m.printdebug = l1m_debug;
+	nl1->dch = dch;
+	nl1->dcb = dcb;
+	mISDN_FsmInitTimer(&nl1->l1m, &nl1->timer);
+	__module_get(THIS_MODULE);
+	dch->l1 = nl1;
+	return 0;
+}
+EXPORT_SYMBOL(create_l1);
+
+int
+l1_init(u_int *deb)
+{
+	debug = deb;
+	l1fsm_s.state_count = L1S_STATE_COUNT;
+	l1fsm_s.event_count = L1_EVENT_COUNT;
+	l1fsm_s.strEvent = strL1Event;
+	l1fsm_s.strState = strL1SState;
+	mISDN_FsmNew(&l1fsm_s, L1SFnList, ARRAY_SIZE(L1SFnList));
+	return 0;
+}
+
+void
+l1_cleanup(void)
+{
+	mISDN_FsmFree(&l1fsm_s);
+}
diff --git a/drivers/isdn/mISDN/layer1.h b/drivers/isdn/mISDN/layer1.h
new file mode 100644
index 000000000000..9c8125fd89af
--- /dev/null
+++ b/drivers/isdn/mISDN/layer1.h
@@ -0,0 +1,26 @@
+/*
+ *
+ * Layer 1 defines
+ *
+ * Copyright 2008  by Karsten Keil <kkeil@novell.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#define FLG_L1_ACTIVATING	1
+#define FLG_L1_ACTIVATED	2
+#define FLG_L1_DEACTTIMER	3
+#define FLG_L1_ACTTIMER		4
+#define FLG_L1_T3RUN		5
+#define FLG_L1_PULL_REQ		6
+#define FLG_L1_UINT		7
+#define FLG_L1_DBLOCKED		8
+
diff --git a/drivers/isdn/mISDN/layer2.c b/drivers/isdn/mISDN/layer2.c
new file mode 100644
index 000000000000..a7915a156c04
--- /dev/null
+++ b/drivers/isdn/mISDN/layer2.c
@@ -0,0 +1,2216 @@
+/*
+ *
+ * Author	Karsten Keil <kkeil@novell.com>
+ *
+ * Copyright 2008  by Karsten Keil <kkeil@novell.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include "fsm.h"
+#include "layer2.h"
+
+static int *debug;
+
+static
+struct Fsm l2fsm = {NULL, 0, 0, NULL, NULL};
+
+static char *strL2State[] =
+{
+	"ST_L2_1",
+	"ST_L2_2",
+	"ST_L2_3",
+	"ST_L2_4",
+	"ST_L2_5",
+	"ST_L2_6",
+	"ST_L2_7",
+	"ST_L2_8",
+};
+
+enum {
+	EV_L2_UI,
+	EV_L2_SABME,
+	EV_L2_DISC,
+	EV_L2_DM,
+	EV_L2_UA,
+	EV_L2_FRMR,
+	EV_L2_SUPER,
+	EV_L2_I,
+	EV_L2_DL_DATA,
+	EV_L2_ACK_PULL,
+	EV_L2_DL_UNITDATA,
+	EV_L2_DL_ESTABLISH_REQ,
+	EV_L2_DL_RELEASE_REQ,
+	EV_L2_MDL_ASSIGN,
+	EV_L2_MDL_REMOVE,
+	EV_L2_MDL_ERROR,
+	EV_L1_DEACTIVATE,
+	EV_L2_T200,
+	EV_L2_T203,
+	EV_L2_SET_OWN_BUSY,
+	EV_L2_CLEAR_OWN_BUSY,
+	EV_L2_FRAME_ERROR,
+};
+
+#define L2_EVENT_COUNT (EV_L2_FRAME_ERROR+1)
+
+static char *strL2Event[] =
+{
+	"EV_L2_UI",
+	"EV_L2_SABME",
+	"EV_L2_DISC",
+	"EV_L2_DM",
+	"EV_L2_UA",
+	"EV_L2_FRMR",
+	"EV_L2_SUPER",
+	"EV_L2_I",
+	"EV_L2_DL_DATA",
+	"EV_L2_ACK_PULL",
+	"EV_L2_DL_UNITDATA",
+	"EV_L2_DL_ESTABLISH_REQ",
+	"EV_L2_DL_RELEASE_REQ",
+	"EV_L2_MDL_ASSIGN",
+	"EV_L2_MDL_REMOVE",
+	"EV_L2_MDL_ERROR",
+	"EV_L1_DEACTIVATE",
+	"EV_L2_T200",
+	"EV_L2_T203",
+	"EV_L2_SET_OWN_BUSY",
+	"EV_L2_CLEAR_OWN_BUSY",
+	"EV_L2_FRAME_ERROR",
+};
+
+static void
+l2m_debug(struct FsmInst *fi, char *fmt, ...)
+{
+	struct layer2 *l2 = fi->userdata;
+	va_list va;
+
+	if (!(*debug & DEBUG_L2_FSM))
+		return;
+	va_start(va, fmt);
+	printk(KERN_DEBUG "l2 (tei %d): ", l2->tei);
+	vprintk(fmt, va);
+	printk("\n");
+	va_end(va);
+}
+
+inline u_int
+l2headersize(struct layer2 *l2, int ui)
+{
+	return ((test_bit(FLG_MOD128, &l2->flag) && (!ui)) ? 2 : 1) +
+		(test_bit(FLG_LAPD, &l2->flag) ? 2 : 1);
+}
+
+inline u_int
+l2addrsize(struct layer2 *l2)
+{
+	return test_bit(FLG_LAPD, &l2->flag) ? 2 : 1;
+}
+
+static u_int
+l2_newid(struct layer2 *l2)
+{
+	u_int	id;
+
+	id = l2->next_id++;
+	if (id == 0x7fff)
+		l2->next_id = 1;
+	id <<= 16;
+	id |= l2->tei << 8;
+	id |= l2->sapi;
+	return id;
+}
+
+static void
+l2up(struct layer2 *l2, u_int prim, struct sk_buff *skb)
+{
+	int	err;
+
+	if (!l2->up)
+		return;
+	mISDN_HEAD_PRIM(skb) = prim;
+	mISDN_HEAD_ID(skb) = (l2->ch.nr << 16) | l2->ch.addr;
+	err = l2->up->send(l2->up, skb);
+	if (err) {
+		printk(KERN_WARNING "%s: err=%d\n", __func__, err);
+		dev_kfree_skb(skb);
+	}
+}
+
+static void
+l2up_create(struct layer2 *l2, u_int prim, int len, void *arg)
+{
+	struct sk_buff	*skb;
+	struct mISDNhead *hh;
+	int		err;
+
+	if (!l2->up)
+		return;
+	skb = mI_alloc_skb(len, GFP_ATOMIC);
+	if (!skb)
+		return;
+	hh = mISDN_HEAD_P(skb);
+	hh->prim = prim;
+	hh->id = (l2->ch.nr << 16) | l2->ch.addr;
+	if (len)
+		memcpy(skb_put(skb, len), arg, len);
+	err = l2->up->send(l2->up, skb);
+	if (err) {
+		printk(KERN_WARNING "%s: err=%d\n", __func__, err);
+		dev_kfree_skb(skb);
+	}
+}
+
+static int
+l2down_skb(struct layer2 *l2, struct sk_buff *skb) {
+	int ret;
+
+	ret = l2->ch.recv(l2->ch.peer, skb);
+	if (ret && (*debug & DEBUG_L2_RECV))
+		printk(KERN_DEBUG "l2down_skb: ret(%d)\n", ret);
+	return ret;
+}
+
+static int
+l2down_raw(struct layer2 *l2, struct sk_buff *skb)
+{
+	struct mISDNhead *hh = mISDN_HEAD_P(skb);
+
+	if (hh->prim == PH_DATA_REQ) {
+		if (test_and_set_bit(FLG_L1_NOTREADY, &l2->flag)) {
+			skb_queue_tail(&l2->down_queue, skb);
+			return 0;
+		}
+		l2->down_id = mISDN_HEAD_ID(skb);
+	}
+	return l2down_skb(l2, skb);
+}
+
+static int
+l2down(struct layer2 *l2, u_int prim, u_int id, struct sk_buff *skb)
+{
+	struct mISDNhead *hh = mISDN_HEAD_P(skb);
+
+	hh->prim = prim;
+	hh->id = id;
+	return l2down_raw(l2, skb);
+}
+
+static int
+l2down_create(struct layer2 *l2, u_int prim, u_int id, int len, void *arg)
+{
+	struct sk_buff	*skb;
+	int		err;
+	struct mISDNhead *hh;
+
+	skb = mI_alloc_skb(len, GFP_ATOMIC);
+	if (!skb)
+		return -ENOMEM;
+	hh = mISDN_HEAD_P(skb);
+	hh->prim = prim;
+	hh->id = id;
+	if (len)
+		memcpy(skb_put(skb, len), arg, len);
+	err = l2down_raw(l2, skb);
+	if (err)
+		dev_kfree_skb(skb);
+	return err;
+}
+
+static int
+ph_data_confirm(struct layer2 *l2, struct mISDNhead *hh, struct sk_buff *skb) {
+	struct sk_buff *nskb = skb;
+	int ret = -EAGAIN;
+
+	if (test_bit(FLG_L1_NOTREADY, &l2->flag)) {
+		if (hh->id == l2->down_id) {
+			nskb = skb_dequeue(&l2->down_queue);
+			if (nskb) {
+				l2->down_id = mISDN_HEAD_ID(nskb);
+				if (l2down_skb(l2, nskb)) {
+					dev_kfree_skb(nskb);
+					l2->down_id = MISDN_ID_NONE;
+				}
+			} else
+				l2->down_id = MISDN_ID_NONE;
+			if (ret) {
+				dev_kfree_skb(skb);
+				ret = 0;
+			}
+			if (l2->down_id == MISDN_ID_NONE) {
+				test_and_clear_bit(FLG_L1_NOTREADY, &l2->flag);
+				mISDN_FsmEvent(&l2->l2m, EV_L2_ACK_PULL, NULL);
+			}
+		}
+	}
+	if (!test_and_set_bit(FLG_L1_NOTREADY, &l2->flag)) {
+		nskb = skb_dequeue(&l2->down_queue);
+		if (nskb) {
+			l2->down_id = mISDN_HEAD_ID(nskb);
+			if (l2down_skb(l2, nskb)) {
+				dev_kfree_skb(nskb);
+				l2->down_id = MISDN_ID_NONE;
+				test_and_clear_bit(FLG_L1_NOTREADY, &l2->flag);
+			}
+		} else
+			test_and_clear_bit(FLG_L1_NOTREADY, &l2->flag);
+	}
+	return ret;
+}
+
+static int
+l2mgr(struct layer2 *l2, u_int prim, void *arg) {
+	long c = (long)arg;
+
+	printk(KERN_WARNING
+	    "l2mgr: addr:%x prim %x %c\n", l2->id, prim, (char)c);
+	if (test_bit(FLG_LAPD, &l2->flag) &&
+		!test_bit(FLG_FIXED_TEI, &l2->flag)) {
+		switch (c) {
+		case 'C':
+		case 'D':
+		case 'G':
+		case 'H':
+			l2_tei(l2, prim, (u_long)arg);
+			break;
+		}
+	}
+	return 0;
+}
+
+static void
+set_peer_busy(struct layer2 *l2) {
+	test_and_set_bit(FLG_PEER_BUSY, &l2->flag);
+	if (skb_queue_len(&l2->i_queue) || skb_queue_len(&l2->ui_queue))
+		test_and_set_bit(FLG_L2BLOCK, &l2->flag);
+}
+
+static void
+clear_peer_busy(struct layer2 *l2) {
+	if (test_and_clear_bit(FLG_PEER_BUSY, &l2->flag))
+		test_and_clear_bit(FLG_L2BLOCK, &l2->flag);
+}
+
+static void
+InitWin(struct layer2 *l2)
+{
+	int i;
+
+	for (i = 0; i < MAX_WINDOW; i++)
+		l2->windowar[i] = NULL;
+}
+
+static int
+freewin(struct layer2 *l2)
+{
+	int i, cnt = 0;
+
+	for (i = 0; i < MAX_WINDOW; i++) {
+		if (l2->windowar[i]) {
+			cnt++;
+			dev_kfree_skb(l2->windowar[i]);
+			l2->windowar[i] = NULL;
+		}
+	}
+	return cnt;
+}
+
+static void
+ReleaseWin(struct layer2 *l2)
+{
+	int cnt = freewin(l2);
+
+	if (cnt)
+		printk(KERN_WARNING
+		    "isdnl2 freed %d skbuffs in release\n", cnt);
+}
+
+inline unsigned int
+cansend(struct layer2 *l2)
+{
+	unsigned int p1;
+
+	if (test_bit(FLG_MOD128, &l2->flag))
+		p1 = (l2->vs - l2->va) % 128;
+	else
+		p1 = (l2->vs - l2->va) % 8;
+	return (p1 < l2->window) && !test_bit(FLG_PEER_BUSY, &l2->flag);
+}
+
+inline void
+clear_exception(struct layer2 *l2)
+{
+	test_and_clear_bit(FLG_ACK_PEND, &l2->flag);
+	test_and_clear_bit(FLG_REJEXC, &l2->flag);
+	test_and_clear_bit(FLG_OWN_BUSY, &l2->flag);
+	clear_peer_busy(l2);
+}
+
+static int
+sethdraddr(struct layer2 *l2, u_char *header, int rsp)
+{
+	u_char *ptr = header;
+	int crbit = rsp;
+
+	if (test_bit(FLG_LAPD, &l2->flag)) {
+		if (test_bit(FLG_LAPD_NET, &l2->flag))
+			crbit = !crbit;
+		*ptr++ = (l2->sapi << 2) | (crbit ? 2 : 0);
+		*ptr++ = (l2->tei << 1) | 1;
+		return 2;
+	} else {
+		if (test_bit(FLG_ORIG, &l2->flag))
+			crbit = !crbit;
+		if (crbit)
+			*ptr++ = l2->addr.B;
+		else
+			*ptr++ = l2->addr.A;
+		return 1;
+	}
+}
+
+static inline void
+enqueue_super(struct layer2 *l2, struct sk_buff *skb)
+{
+	if (l2down(l2, PH_DATA_REQ, l2_newid(l2), skb))
+		dev_kfree_skb(skb);
+}
+
+static inline void
+enqueue_ui(struct layer2 *l2, struct sk_buff *skb)
+{
+	if (l2->tm)
+		l2_tei(l2, MDL_STATUS_UI_IND, 0);
+	if (l2down(l2, PH_DATA_REQ, l2_newid(l2), skb))
+		dev_kfree_skb(skb);
+}
+
+inline int
+IsUI(u_char *data)
+{
+	return (data[0] & 0xef) == UI;
+}
+
+inline int
+IsUA(u_char *data)
+{
+	return (data[0] & 0xef) == UA;
+}
+
+inline int
+IsDM(u_char *data)
+{
+	return (data[0] & 0xef) == DM;
+}
+
+inline int
+IsDISC(u_char *data)
+{
+	return (data[0] & 0xef) == DISC;
+}
+
+inline int
+IsRR(u_char *data, struct layer2 *l2)
+{
+	if (test_bit(FLG_MOD128, &l2->flag))
+		return data[0] == RR;
+	else
+		return (data[0] & 0xf) == 1;
+}
+
+inline int
+IsSFrame(u_char *data, struct layer2 *l2)
+{
+	register u_char d = *data;
+
+	if (!test_bit(FLG_MOD128, &l2->flag))
+		d &= 0xf;
+	return ((d & 0xf3) == 1) && ((d & 0x0c) != 0x0c);
+}
+
+inline int
+IsSABME(u_char *data, struct layer2 *l2)
+{
+	u_char d = data[0] & ~0x10;
+
+	return test_bit(FLG_MOD128, &l2->flag) ? d == SABME : d == SABM;
+}
+
+inline int
+IsREJ(u_char *data, struct layer2 *l2)
+{
+	return test_bit(FLG_MOD128, &l2->flag) ?
+		data[0] == REJ : (data[0] & 0xf) == REJ;
+}
+
+inline int
+IsFRMR(u_char *data)
+{
+	return (data[0] & 0xef) == FRMR;
+}
+
+inline int
+IsRNR(u_char *data, struct layer2 *l2)
+{
+	return test_bit(FLG_MOD128, &l2->flag) ?
+	    data[0] == RNR : (data[0] & 0xf) == RNR;
+}
+
+int
+iframe_error(struct layer2 *l2, struct sk_buff *skb)
+{
+	u_int	i;
+	int	rsp = *skb->data & 0x2;
+
+	i = l2addrsize(l2) + (test_bit(FLG_MOD128, &l2->flag) ? 2 : 1);
+	if (test_bit(FLG_ORIG, &l2->flag))
+		rsp = !rsp;
+	if (rsp)
+		return 'L';
+	if (skb->len < i)
+		return 'N';
+	if ((skb->len - i) > l2->maxlen)
+		return 'O';
+	return 0;
+}
+
+int
+super_error(struct layer2 *l2, struct sk_buff *skb)
+{
+	if (skb->len != l2addrsize(l2) +
+	    (test_bit(FLG_MOD128, &l2->flag) ? 2 : 1))
+		return 'N';
+	return 0;
+}
+
+int
+unnum_error(struct layer2 *l2, struct sk_buff *skb, int wantrsp)
+{
+	int rsp = (*skb->data & 0x2) >> 1;
+	if (test_bit(FLG_ORIG, &l2->flag))
+		rsp = !rsp;
+	if (rsp != wantrsp)
+		return 'L';
+	if (skb->len != l2addrsize(l2) + 1)
+		return 'N';
+	return 0;
+}
+
+int
+UI_error(struct layer2 *l2, struct sk_buff *skb)
+{
+	int rsp = *skb->data & 0x2;
+	if (test_bit(FLG_ORIG, &l2->flag))
+		rsp = !rsp;
+	if (rsp)
+		return 'L';
+	if (skb->len > l2->maxlen + l2addrsize(l2) + 1)
+		return 'O';
+	return 0;
+}
+
+int
+FRMR_error(struct layer2 *l2, struct sk_buff *skb)
+{
+	u_int	headers = l2addrsize(l2) + 1;
+	u_char	*datap = skb->data + headers;
+	int	rsp = *skb->data & 0x2;
+
+	if (test_bit(FLG_ORIG, &l2->flag))
+		rsp = !rsp;
+	if (!rsp)
+		return 'L';
+	if (test_bit(FLG_MOD128, &l2->flag)) {
+		if (skb->len < headers + 5)
+			return 'N';
+		else if (*debug & DEBUG_L2)
+			l2m_debug(&l2->l2m,
+			    "FRMR information %2x %2x %2x %2x %2x",
+			    datap[0], datap[1], datap[2], datap[3], datap[4]);
+	} else {
+		if (skb->len < headers + 3)
+			return 'N';
+		else if (*debug & DEBUG_L2)
+			l2m_debug(&l2->l2m,
+			    "FRMR information %2x %2x %2x",
+			    datap[0], datap[1], datap[2]);
+	}
+	return 0;
+}
+
+static unsigned int
+legalnr(struct layer2 *l2, unsigned int nr)
+{
+	if (test_bit(FLG_MOD128, &l2->flag))
+		return ((nr - l2->va) % 128) <= ((l2->vs - l2->va) % 128);
+	else
+		return ((nr - l2->va) % 8) <= ((l2->vs - l2->va) % 8);
+}
+
+static void
+setva(struct layer2 *l2, unsigned int nr)
+{
+	struct sk_buff	*skb;
+
+	while (l2->va != nr) {
+		l2->va++;
+		if (test_bit(FLG_MOD128, &l2->flag))
+			l2->va %= 128;
+		else
+			l2->va %= 8;
+		if (l2->windowar[l2->sow]) {
+			skb_trim(l2->windowar[l2->sow], 0);
+			skb_queue_tail(&l2->tmp_queue, l2->windowar[l2->sow]);
+			l2->windowar[l2->sow] = NULL;
+		}
+		l2->sow = (l2->sow + 1) % l2->window;
+	}
+	skb = skb_dequeue(&l2->tmp_queue);
+	while (skb) {
+		dev_kfree_skb(skb);
+		skb = skb_dequeue(&l2->tmp_queue);
+	}
+}
+
+static void
+send_uframe(struct layer2 *l2, struct sk_buff *skb, u_char cmd, u_char cr)
+{
+	u_char tmp[MAX_L2HEADER_LEN];
+	int i;
+
+	i = sethdraddr(l2, tmp, cr);
+	tmp[i++] = cmd;
+	if (skb)
+		skb_trim(skb, 0);
+	else {
+		skb = mI_alloc_skb(i, GFP_ATOMIC);
+		if (!skb) {
+			printk(KERN_WARNING "%s: can't alloc skbuff\n",
+				__func__);
+			return;
+		}
+	}
+	memcpy(skb_put(skb, i), tmp, i);
+	enqueue_super(l2, skb);
+}
+
+
+inline u_char
+get_PollFlag(struct layer2 *l2, struct sk_buff *skb)
+{
+	return skb->data[l2addrsize(l2)] & 0x10;
+}
+
+inline u_char
+get_PollFlagFree(struct layer2 *l2, struct sk_buff *skb)
+{
+	u_char PF;
+
+	PF = get_PollFlag(l2, skb);
+	dev_kfree_skb(skb);
+	return PF;
+}
+
+inline void
+start_t200(struct layer2 *l2, int i)
+{
+	mISDN_FsmAddTimer(&l2->t200, l2->T200, EV_L2_T200, NULL, i);
+	test_and_set_bit(FLG_T200_RUN, &l2->flag);
+}
+
+inline void
+restart_t200(struct layer2 *l2, int i)
+{
+	mISDN_FsmRestartTimer(&l2->t200, l2->T200, EV_L2_T200, NULL, i);
+	test_and_set_bit(FLG_T200_RUN, &l2->flag);
+}
+
+inline void
+stop_t200(struct layer2 *l2, int i)
+{
+	if (test_and_clear_bit(FLG_T200_RUN, &l2->flag))
+		mISDN_FsmDelTimer(&l2->t200, i);
+}
+
+inline void
+st5_dl_release_l2l3(struct layer2 *l2)
+{
+	int pr;
+
+	if (test_and_clear_bit(FLG_PEND_REL, &l2->flag))
+		pr = DL_RELEASE_CNF;
+	else
+		pr = DL_RELEASE_IND;
+	l2up_create(l2, pr, 0, NULL);
+}
+
+inline void
+lapb_dl_release_l2l3(struct layer2 *l2, int f)
+{
+	if (test_bit(FLG_LAPB, &l2->flag))
+		l2down_create(l2, PH_DEACTIVATE_REQ, l2_newid(l2), 0, NULL);
+	l2up_create(l2, f, 0, NULL);
+}
+
+static void
+establishlink(struct FsmInst *fi)
+{
+	struct layer2 *l2 = fi->userdata;
+	u_char cmd;
+
+	clear_exception(l2);
+	l2->rc = 0;
+	cmd = (test_bit(FLG_MOD128, &l2->flag) ? SABME : SABM) | 0x10;
+	send_uframe(l2, NULL, cmd, CMD);
+	mISDN_FsmDelTimer(&l2->t203, 1);
+	restart_t200(l2, 1);
+	test_and_clear_bit(FLG_PEND_REL, &l2->flag);
+	freewin(l2);
+	mISDN_FsmChangeState(fi, ST_L2_5);
+}
+
+static void
+l2_mdl_error_ua(struct FsmInst *fi, int event, void *arg)
+{
+	struct sk_buff *skb = arg;
+	struct layer2 *l2 = fi->userdata;
+
+	if (get_PollFlagFree(l2, skb))
+		l2mgr(l2, MDL_ERROR_IND, (void *) 'C');
+	else
+		l2mgr(l2, MDL_ERROR_IND, (void *) 'D');
+
+}
+
+static void
+l2_mdl_error_dm(struct FsmInst *fi, int event, void *arg)
+{
+	struct sk_buff *skb = arg;
+	struct layer2 *l2 = fi->userdata;
+
+	if (get_PollFlagFree(l2, skb))
+		l2mgr(l2, MDL_ERROR_IND, (void *) 'B');
+	else {
+		l2mgr(l2, MDL_ERROR_IND, (void *) 'E');
+		establishlink(fi);
+		test_and_clear_bit(FLG_L3_INIT, &l2->flag);
+	}
+}
+
+static void
+l2_st8_mdl_error_dm(struct FsmInst *fi, int event, void *arg)
+{
+	struct sk_buff *skb = arg;
+	struct layer2 *l2 = fi->userdata;
+
+	if (get_PollFlagFree(l2, skb))
+		l2mgr(l2, MDL_ERROR_IND, (void *) 'B');
+	else
+		l2mgr(l2, MDL_ERROR_IND, (void *) 'E');
+	establishlink(fi);
+	test_and_clear_bit(FLG_L3_INIT, &l2->flag);
+}
+
+static void
+l2_go_st3(struct FsmInst *fi, int event, void *arg)
+{
+	dev_kfree_skb((struct sk_buff *)arg);
+	mISDN_FsmChangeState(fi, ST_L2_3);
+}
+
+static void
+l2_mdl_assign(struct FsmInst *fi, int event, void *arg)
+{
+	struct layer2	*l2 = fi->userdata;
+
+	mISDN_FsmChangeState(fi, ST_L2_3);
+	dev_kfree_skb((struct sk_buff *)arg);
+	l2_tei(l2, MDL_ASSIGN_IND, 0);
+}
+
+static void
+l2_queue_ui_assign(struct FsmInst *fi, int event, void *arg)
+{
+	struct layer2 *l2 = fi->userdata;
+	struct sk_buff *skb = arg;
+
+	skb_queue_tail(&l2->ui_queue, skb);
+	mISDN_FsmChangeState(fi, ST_L2_2);
+	l2_tei(l2, MDL_ASSIGN_IND, 0);
+}
+
+static void
+l2_queue_ui(struct FsmInst *fi, int event, void *arg)
+{
+	struct layer2 *l2 = fi->userdata;
+	struct sk_buff *skb = arg;
+
+	skb_queue_tail(&l2->ui_queue, skb);
+}
+
+static void
+tx_ui(struct layer2 *l2)
+{
+	struct sk_buff *skb;
+	u_char header[MAX_L2HEADER_LEN];
+	int i;
+
+	i = sethdraddr(l2, header, CMD);
+	if (test_bit(FLG_LAPD_NET, &l2->flag))
+		header[1] = 0xff; /* tei 127 */
+	header[i++] = UI;
+	while ((skb = skb_dequeue(&l2->ui_queue))) {
+		memcpy(skb_push(skb, i), header, i);
+		enqueue_ui(l2, skb);
+	}
+}
+
+static void
+l2_send_ui(struct FsmInst *fi, int event, void *arg)
+{
+	struct layer2 *l2 = fi->userdata;
+	struct sk_buff *skb = arg;
+
+	skb_queue_tail(&l2->ui_queue, skb);
+	tx_ui(l2);
+}
+
+static void
+l2_got_ui(struct FsmInst *fi, int event, void *arg)
+{
+	struct layer2 *l2 = fi->userdata;
+	struct sk_buff *skb = arg;
+
+	skb_pull(skb, l2headersize(l2, 1));
+/*
+ *		in states 1-3 for broadcast
+ */
+
+	if (l2->tm)
+		l2_tei(l2, MDL_STATUS_UI_IND, 0);
+	l2up(l2, DL_UNITDATA_IND, skb);
+}
+
+static void
+l2_establish(struct FsmInst *fi, int event, void *arg)
+{
+	struct sk_buff *skb = arg;
+	struct layer2 *l2 = fi->userdata;
+
+	establishlink(fi);
+	test_and_set_bit(FLG_L3_INIT, &l2->flag);
+	dev_kfree_skb(skb);
+}
+
+static void
+l2_discard_i_setl3(struct FsmInst *fi, int event, void *arg)
+{
+	struct sk_buff *skb = arg;
+	struct layer2 *l2 = fi->userdata;
+
+	skb_queue_purge(&l2->i_queue);
+	test_and_set_bit(FLG_L3_INIT, &l2->flag);
+	test_and_clear_bit(FLG_PEND_REL, &l2->flag);
+	dev_kfree_skb(skb);
+}
+
+static void
+l2_l3_reestablish(struct FsmInst *fi, int event, void *arg)
+{
+	struct sk_buff *skb = arg;
+	struct layer2 *l2 = fi->userdata;
+
+	skb_queue_purge(&l2->i_queue);
+	establishlink(fi);
+	test_and_set_bit(FLG_L3_INIT, &l2->flag);
+	dev_kfree_skb(skb);
+}
+
+static void
+l2_release(struct FsmInst *fi, int event, void *arg)
+{
+	struct layer2 *l2 = fi->userdata;
+	struct sk_buff *skb = arg;
+
+	skb_trim(skb, 0);
+	l2up(l2, DL_RELEASE_CNF, skb);
+}
+
+static void
+l2_pend_rel(struct FsmInst *fi, int event, void *arg)
+{
+	struct sk_buff *skb = arg;
+	struct layer2 *l2 = fi->userdata;
+
+	test_and_set_bit(FLG_PEND_REL, &l2->flag);
+	dev_kfree_skb(skb);
+}
+
+static void
+l2_disconnect(struct FsmInst *fi, int event, void *arg)
+{
+	struct layer2 *l2 = fi->userdata;
+	struct sk_buff *skb = arg;
+
+	skb_queue_purge(&l2->i_queue);
+	freewin(l2);
+	mISDN_FsmChangeState(fi, ST_L2_6);
+	l2->rc = 0;
+	send_uframe(l2, NULL, DISC | 0x10, CMD);
+	mISDN_FsmDelTimer(&l2->t203, 1);
+	restart_t200(l2, 2);
+	if (skb)
+		dev_kfree_skb(skb);
+}
+
+static void
+l2_start_multi(struct FsmInst *fi, int event, void *arg)
+{
+	struct layer2	*l2 = fi->userdata;
+	struct sk_buff	*skb = arg;
+
+	l2->vs = 0;
+	l2->va = 0;
+	l2->vr = 0;
+	l2->sow = 0;
+	clear_exception(l2);
+	send_uframe(l2, NULL, UA | get_PollFlag(l2, skb), RSP);
+	mISDN_FsmChangeState(fi, ST_L2_7);
+	mISDN_FsmAddTimer(&l2->t203, l2->T203, EV_L2_T203, NULL, 3);
+	skb_trim(skb, 0);
+	l2up(l2, DL_ESTABLISH_IND, skb);
+	if (l2->tm)
+		l2_tei(l2, MDL_STATUS_UP_IND, 0);
+}
+
+static void
+l2_send_UA(struct FsmInst *fi, int event, void *arg)
+{
+	struct layer2 *l2 = fi->userdata;
+	struct sk_buff *skb = arg;
+
+	send_uframe(l2, skb, UA | get_PollFlag(l2, skb), RSP);
+}
+
+static void
+l2_send_DM(struct FsmInst *fi, int event, void *arg)
+{
+	struct layer2 *l2 = fi->userdata;
+	struct sk_buff *skb = arg;
+
+	send_uframe(l2, skb, DM | get_PollFlag(l2, skb), RSP);
+}
+
+static void
+l2_restart_multi(struct FsmInst *fi, int event, void *arg)
+{
+	struct layer2	*l2 = fi->userdata;
+	struct sk_buff	*skb = arg;
+	int		est = 0;
+
+	send_uframe(l2, skb, UA | get_PollFlag(l2, skb), RSP);
+
+	l2mgr(l2, MDL_ERROR_IND, (void *) 'F');
+
+	if (l2->vs != l2->va) {
+		skb_queue_purge(&l2->i_queue);
+		est = 1;
+	}
+
+	clear_exception(l2);
+	l2->vs = 0;
+	l2->va = 0;
+	l2->vr = 0;
+	l2->sow = 0;
+	mISDN_FsmChangeState(fi, ST_L2_7);
+	stop_t200(l2, 3);
+	mISDN_FsmRestartTimer(&l2->t203, l2->T203, EV_L2_T203, NULL, 3);
+
+	if (est)
+		l2up_create(l2, DL_ESTABLISH_IND, 0, NULL);
+/*		mISDN_queue_data(&l2->inst, l2->inst.id | MSG_BROADCAST,
+ *		    MGR_SHORTSTATUS | INDICATION, SSTATUS_L2_ESTABLISHED,
+ *		    0, NULL, 0);
+ */
+	if (skb_queue_len(&l2->i_queue) && cansend(l2))
+		mISDN_FsmEvent(fi, EV_L2_ACK_PULL, NULL);
+}
+
+static void
+l2_stop_multi(struct FsmInst *fi, int event, void *arg)
+{
+	struct layer2	*l2 = fi->userdata;
+	struct sk_buff	*skb = arg;
+
+	mISDN_FsmChangeState(fi, ST_L2_4);
+	mISDN_FsmDelTimer(&l2->t203, 3);
+	stop_t200(l2, 4);
+
+	send_uframe(l2, skb, UA | get_PollFlag(l2, skb), RSP);
+	skb_queue_purge(&l2->i_queue);
+	freewin(l2);
+	lapb_dl_release_l2l3(l2, DL_RELEASE_IND);
+	if (l2->tm)
+		l2_tei(l2, MDL_STATUS_DOWN_IND, 0);
+}
+
+static void
+l2_connected(struct FsmInst *fi, int event, void *arg)
+{
+	struct layer2	*l2 = fi->userdata;
+	struct sk_buff	*skb = arg;
+	int pr = -1;
+
+	if (!get_PollFlag(l2, skb)) {
+		l2_mdl_error_ua(fi, event, arg);
+		return;
+	}
+	dev_kfree_skb(skb);
+	if (test_and_clear_bit(FLG_PEND_REL, &l2->flag))
+		l2_disconnect(fi, event, NULL);
+	if (test_and_clear_bit(FLG_L3_INIT, &l2->flag)) {
+		pr = DL_ESTABLISH_CNF;
+	} else if (l2->vs != l2->va) {
+		skb_queue_purge(&l2->i_queue);
+		pr = DL_ESTABLISH_IND;
+	}
+	stop_t200(l2, 5);
+	l2->vr = 0;
+	l2->vs = 0;
+	l2->va = 0;
+	l2->sow = 0;
+	mISDN_FsmChangeState(fi, ST_L2_7);
+	mISDN_FsmAddTimer(&l2->t203, l2->T203, EV_L2_T203, NULL, 4);
+	if (pr != -1)
+		l2up_create(l2, pr, 0, NULL);
+
+	if (skb_queue_len(&l2->i_queue) && cansend(l2))
+		mISDN_FsmEvent(fi, EV_L2_ACK_PULL, NULL);
+
+	if (l2->tm)
+		l2_tei(l2, MDL_STATUS_UP_IND, 0);
+}
+
+static void
+l2_released(struct FsmInst *fi, int event, void *arg)
+{
+	struct layer2 *l2 = fi->userdata;
+	struct sk_buff *skb = arg;
+
+	if (!get_PollFlag(l2, skb)) {
+		l2_mdl_error_ua(fi, event, arg);
+		return;
+	}
+	dev_kfree_skb(skb);
+	stop_t200(l2, 6);
+	lapb_dl_release_l2l3(l2, DL_RELEASE_CNF);
+	mISDN_FsmChangeState(fi, ST_L2_4);
+	if (l2->tm)
+		l2_tei(l2, MDL_STATUS_DOWN_IND, 0);
+}
+
+static void
+l2_reestablish(struct FsmInst *fi, int event, void *arg)
+{
+	struct layer2 *l2 = fi->userdata;
+	struct sk_buff *skb = arg;
+
+	if (!get_PollFlagFree(l2, skb)) {
+		establishlink(fi);
+		test_and_set_bit(FLG_L3_INIT, &l2->flag);
+	}
+}
+
+static void
+l2_st5_dm_release(struct FsmInst *fi, int event, void *arg)
+{
+	struct layer2 *l2 = fi->userdata;
+	struct sk_buff *skb = arg;
+
+	if (get_PollFlagFree(l2, skb)) {
+		stop_t200(l2, 7);
+		if (!test_bit(FLG_L3_INIT, &l2->flag))
+			skb_queue_purge(&l2->i_queue);
+		if (test_bit(FLG_LAPB, &l2->flag))
+			l2down_create(l2, PH_DEACTIVATE_REQ,
+				l2_newid(l2), 0, NULL);
+		st5_dl_release_l2l3(l2);
+		mISDN_FsmChangeState(fi, ST_L2_4);
+		if (l2->tm)
+			l2_tei(l2, MDL_STATUS_DOWN_IND, 0);
+	}
+}
+
+static void
+l2_st6_dm_release(struct FsmInst *fi, int event, void *arg)
+{
+	struct layer2 *l2 = fi->userdata;
+	struct sk_buff *skb = arg;
+
+	if (get_PollFlagFree(l2, skb)) {
+		stop_t200(l2, 8);
+		lapb_dl_release_l2l3(l2, DL_RELEASE_CNF);
+		mISDN_FsmChangeState(fi, ST_L2_4);
+		if (l2->tm)
+			l2_tei(l2, MDL_STATUS_DOWN_IND, 0);
+	}
+}
+
+void
+enquiry_cr(struct layer2 *l2, u_char typ, u_char cr, u_char pf)
+{
+	struct sk_buff *skb;
+	u_char tmp[MAX_L2HEADER_LEN];
+	int i;
+
+	i = sethdraddr(l2, tmp, cr);
+	if (test_bit(FLG_MOD128, &l2->flag)) {
+		tmp[i++] = typ;
+		tmp[i++] = (l2->vr << 1) | (pf ? 1 : 0);
+	} else
+		tmp[i++] = (l2->vr << 5) | typ | (pf ? 0x10 : 0);
+	skb = mI_alloc_skb(i, GFP_ATOMIC);
+	if (!skb) {
+		printk(KERN_WARNING
+		    "isdnl2 can't alloc sbbuff for enquiry_cr\n");
+		return;
+	}
+	memcpy(skb_put(skb, i), tmp, i);
+	enqueue_super(l2, skb);
+}
+
+inline void
+enquiry_response(struct layer2 *l2)
+{
+	if (test_bit(FLG_OWN_BUSY, &l2->flag))
+		enquiry_cr(l2, RNR, RSP, 1);
+	else
+		enquiry_cr(l2, RR, RSP, 1);
+	test_and_clear_bit(FLG_ACK_PEND, &l2->flag);
+}
+
+inline void
+transmit_enquiry(struct layer2 *l2)
+{
+	if (test_bit(FLG_OWN_BUSY, &l2->flag))
+		enquiry_cr(l2, RNR, CMD, 1);
+	else
+		enquiry_cr(l2, RR, CMD, 1);
+	test_and_clear_bit(FLG_ACK_PEND, &l2->flag);
+	start_t200(l2, 9);
+}
+
+
+static void
+nrerrorrecovery(struct FsmInst *fi)
+{
+	struct layer2 *l2 = fi->userdata;
+
+	l2mgr(l2, MDL_ERROR_IND, (void *) 'J');
+	establishlink(fi);
+	test_and_clear_bit(FLG_L3_INIT, &l2->flag);
+}
+
+static void
+invoke_retransmission(struct layer2 *l2, unsigned int nr)
+{
+	u_int	p1;
+
+	if (l2->vs != nr) {
+		while (l2->vs != nr) {
+			(l2->vs)--;
+			if (test_bit(FLG_MOD128, &l2->flag)) {
+				l2->vs %= 128;
+				p1 = (l2->vs - l2->va) % 128;
+			} else {
+				l2->vs %= 8;
+				p1 = (l2->vs - l2->va) % 8;
+			}
+			p1 = (p1 + l2->sow) % l2->window;
+			if (l2->windowar[p1])
+				skb_queue_head(&l2->i_queue, l2->windowar[p1]);
+			else
+				printk(KERN_WARNING
+				    "%s: windowar[%d] is NULL\n",
+				    __func__, p1);
+			l2->windowar[p1] = NULL;
+		}
+		mISDN_FsmEvent(&l2->l2m, EV_L2_ACK_PULL, NULL);
+	}
+}
+
+static void
+l2_st7_got_super(struct FsmInst *fi, int event, void *arg)
+{
+	struct layer2 *l2 = fi->userdata;
+	struct sk_buff *skb = arg;
+	int PollFlag, rsp, typ = RR;
+	unsigned int nr;
+
+	rsp = *skb->data & 0x2;
+	if (test_bit(FLG_ORIG, &l2->flag))
+		rsp = !rsp;
+
+	skb_pull(skb, l2addrsize(l2));
+	if (IsRNR(skb->data, l2)) {
+		set_peer_busy(l2);
+		typ = RNR;
+	} else
+		clear_peer_busy(l2);
+	if (IsREJ(skb->data, l2))
+		typ = REJ;
+
+	if (test_bit(FLG_MOD128, &l2->flag)) {
+		PollFlag = (skb->data[1] & 0x1) == 0x1;
+		nr = skb->data[1] >> 1;
+	} else {
+		PollFlag = (skb->data[0] & 0x10);
+		nr = (skb->data[0] >> 5) & 0x7;
+	}
+	dev_kfree_skb(skb);
+
+	if (PollFlag) {
+		if (rsp)
+			l2mgr(l2, MDL_ERROR_IND, (void *) 'A');
+		else
+			enquiry_response(l2);
+	}
+	if (legalnr(l2, nr)) {
+		if (typ == REJ) {
+			setva(l2, nr);
+			invoke_retransmission(l2, nr);
+			stop_t200(l2, 10);
+			if (mISDN_FsmAddTimer(&l2->t203, l2->T203,
+					EV_L2_T203, NULL, 6))
+				l2m_debug(&l2->l2m, "Restart T203 ST7 REJ");
+		} else if ((nr == l2->vs) && (typ == RR)) {
+			setva(l2, nr);
+			stop_t200(l2, 11);
+			mISDN_FsmRestartTimer(&l2->t203, l2->T203,
+					EV_L2_T203, NULL, 7);
+		} else if ((l2->va != nr) || (typ == RNR)) {
+			setva(l2, nr);
+			if (typ != RR)
+				mISDN_FsmDelTimer(&l2->t203, 9);
+			restart_t200(l2, 12);
+		}
+		if (skb_queue_len(&l2->i_queue) && (typ == RR))
+			mISDN_FsmEvent(fi, EV_L2_ACK_PULL, NULL);
+	} else
+		nrerrorrecovery(fi);
+}
+
+static void
+l2_feed_i_if_reest(struct FsmInst *fi, int event, void *arg)
+{
+	struct layer2 *l2 = fi->userdata;
+	struct sk_buff *skb = arg;
+
+	if (!test_bit(FLG_L3_INIT, &l2->flag))
+		skb_queue_tail(&l2->i_queue, skb);
+	else
+		dev_kfree_skb(skb);
+}
+
+static void
+l2_feed_i_pull(struct FsmInst *fi, int event, void *arg)
+{
+	struct layer2 *l2 = fi->userdata;
+	struct sk_buff *skb = arg;
+
+	skb_queue_tail(&l2->i_queue, skb);
+	mISDN_FsmEvent(fi, EV_L2_ACK_PULL, NULL);
+}
+
+static void
+l2_feed_iqueue(struct FsmInst *fi, int event, void *arg)
+{
+	struct layer2 *l2 = fi->userdata;
+	struct sk_buff *skb = arg;
+
+	skb_queue_tail(&l2->i_queue, skb);
+}
+
+static void
+l2_got_iframe(struct FsmInst *fi, int event, void *arg)
+{
+	struct layer2	*l2 = fi->userdata;
+	struct sk_buff	*skb = arg;
+	int		PollFlag, i;
+	u_int		ns, nr;
+
+	i = l2addrsize(l2);
+	if (test_bit(FLG_MOD128, &l2->flag)) {
+		PollFlag = ((skb->data[i + 1] & 0x1) == 0x1);
+		ns = skb->data[i] >> 1;
+		nr = (skb->data[i + 1] >> 1) & 0x7f;
+	} else {
+		PollFlag = (skb->data[i] & 0x10);
+		ns = (skb->data[i] >> 1) & 0x7;
+		nr = (skb->data[i] >> 5) & 0x7;
+	}
+	if (test_bit(FLG_OWN_BUSY, &l2->flag)) {
+		dev_kfree_skb(skb);
+		if (PollFlag)
+			enquiry_response(l2);
+	} else {
+		if (l2->vr == ns) {
+			l2->vr++;
+			if (test_bit(FLG_MOD128, &l2->flag))
+				l2->vr %= 128;
+			else
+				l2->vr %= 8;
+			test_and_clear_bit(FLG_REJEXC, &l2->flag);
+			if (PollFlag)
+				enquiry_response(l2);
+			else
+				test_and_set_bit(FLG_ACK_PEND, &l2->flag);
+			skb_pull(skb, l2headersize(l2, 0));
+			l2up(l2, DL_DATA_IND, skb);
+		} else {
+			/* n(s)!=v(r) */
+			dev_kfree_skb(skb);
+			if (test_and_set_bit(FLG_REJEXC, &l2->flag)) {
+				if (PollFlag)
+					enquiry_response(l2);
+			} else {
+				enquiry_cr(l2, REJ, RSP, PollFlag);
+				test_and_clear_bit(FLG_ACK_PEND, &l2->flag);
+			}
+		}
+	}
+	if (legalnr(l2, nr)) {
+		if (!test_bit(FLG_PEER_BUSY, &l2->flag) &&
+		    (fi->state == ST_L2_7)) {
+			if (nr == l2->vs) {
+				stop_t200(l2, 13);
+				mISDN_FsmRestartTimer(&l2->t203, l2->T203,
+						EV_L2_T203, NULL, 7);
+			} else if (nr != l2->va)
+				restart_t200(l2, 14);
+		}
+		setva(l2, nr);
+	} else {
+		nrerrorrecovery(fi);
+		return;
+	}
+	if (skb_queue_len(&l2->i_queue) && (fi->state == ST_L2_7))
+		mISDN_FsmEvent(fi, EV_L2_ACK_PULL, NULL);
+	if (test_and_clear_bit(FLG_ACK_PEND, &l2->flag))
+		enquiry_cr(l2, RR, RSP, 0);
+}
+
+static void
+l2_got_tei(struct FsmInst *fi, int event, void *arg)
+{
+	struct layer2	*l2 = fi->userdata;
+	u_int		info;
+
+	l2->tei = (signed char)(long)arg;
+	set_channel_address(&l2->ch, l2->sapi, l2->tei);
+	info = DL_INFO_L2_CONNECT;
+	l2up_create(l2, DL_INFORMATION_IND, sizeof(info), &info);
+	if (fi->state == ST_L2_3) {
+		establishlink(fi);
+		test_and_set_bit(FLG_L3_INIT, &l2->flag);
+	} else
+		mISDN_FsmChangeState(fi, ST_L2_4);
+	if (skb_queue_len(&l2->ui_queue))
+		tx_ui(l2);
+}
+
+static void
+l2_st5_tout_200(struct FsmInst *fi, int event, void *arg)
+{
+	struct layer2 *l2 = fi->userdata;
+
+	if (test_bit(FLG_LAPD, &l2->flag) &&
+		test_bit(FLG_DCHAN_BUSY, &l2->flag)) {
+		mISDN_FsmAddTimer(&l2->t200, l2->T200, EV_L2_T200, NULL, 9);
+	} else if (l2->rc == l2->N200) {
+		mISDN_FsmChangeState(fi, ST_L2_4);
+		test_and_clear_bit(FLG_T200_RUN, &l2->flag);
+		skb_queue_purge(&l2->i_queue);
+		l2mgr(l2, MDL_ERROR_IND, (void *) 'G');
+		if (test_bit(FLG_LAPB, &l2->flag))
+			l2down_create(l2, PH_DEACTIVATE_REQ,
+				l2_newid(l2), 0, NULL);
+		st5_dl_release_l2l3(l2);
+		if (l2->tm)
+			l2_tei(l2, MDL_STATUS_DOWN_IND, 0);
+	} else {
+		l2->rc++;
+		mISDN_FsmAddTimer(&l2->t200, l2->T200, EV_L2_T200, NULL, 9);
+		send_uframe(l2, NULL, (test_bit(FLG_MOD128, &l2->flag) ?
+			SABME : SABM) | 0x10, CMD);
+	}
+}
+
+static void
+l2_st6_tout_200(struct FsmInst *fi, int event, void *arg)
+{
+	struct layer2 *l2 = fi->userdata;
+
+	if (test_bit(FLG_LAPD, &l2->flag) &&
+		test_bit(FLG_DCHAN_BUSY, &l2->flag)) {
+		mISDN_FsmAddTimer(&l2->t200, l2->T200, EV_L2_T200, NULL, 9);
+	} else if (l2->rc == l2->N200) {
+		mISDN_FsmChangeState(fi, ST_L2_4);
+		test_and_clear_bit(FLG_T200_RUN, &l2->flag);
+		l2mgr(l2, MDL_ERROR_IND, (void *) 'H');
+		lapb_dl_release_l2l3(l2, DL_RELEASE_CNF);
+		if (l2->tm)
+			l2_tei(l2, MDL_STATUS_DOWN_IND, 0);
+	} else {
+		l2->rc++;
+		mISDN_FsmAddTimer(&l2->t200, l2->T200, EV_L2_T200,
+			    NULL, 9);
+		send_uframe(l2, NULL, DISC | 0x10, CMD);
+	}
+}
+
+static void
+l2_st7_tout_200(struct FsmInst *fi, int event, void *arg)
+{
+	struct layer2 *l2 = fi->userdata;
+
+	if (test_bit(FLG_LAPD, &l2->flag) &&
+		test_bit(FLG_DCHAN_BUSY, &l2->flag)) {
+		mISDN_FsmAddTimer(&l2->t200, l2->T200, EV_L2_T200, NULL, 9);
+		return;
+	}
+	test_and_clear_bit(FLG_T200_RUN, &l2->flag);
+	l2->rc = 0;
+	mISDN_FsmChangeState(fi, ST_L2_8);
+	transmit_enquiry(l2);
+	l2->rc++;
+}
+
+static void
+l2_st8_tout_200(struct FsmInst *fi, int event, void *arg)
+{
+	struct layer2 *l2 = fi->userdata;
+
+	if (test_bit(FLG_LAPD, &l2->flag) &&
+		test_bit(FLG_DCHAN_BUSY, &l2->flag)) {
+		mISDN_FsmAddTimer(&l2->t200, l2->T200, EV_L2_T200, NULL, 9);
+		return;
+	}
+	test_and_clear_bit(FLG_T200_RUN, &l2->flag);
+	if (l2->rc == l2->N200) {
+		l2mgr(l2, MDL_ERROR_IND, (void *) 'I');
+		establishlink(fi);
+		test_and_clear_bit(FLG_L3_INIT, &l2->flag);
+	} else {
+		transmit_enquiry(l2);
+		l2->rc++;
+	}
+}
+
+static void
+l2_st7_tout_203(struct FsmInst *fi, int event, void *arg)
+{
+	struct layer2 *l2 = fi->userdata;
+
+	if (test_bit(FLG_LAPD, &l2->flag) &&
+		test_bit(FLG_DCHAN_BUSY, &l2->flag)) {
+		mISDN_FsmAddTimer(&l2->t203, l2->T203, EV_L2_T203, NULL, 9);
+		return;
+	}
+	mISDN_FsmChangeState(fi, ST_L2_8);
+	transmit_enquiry(l2);
+	l2->rc = 0;
+}
+
+static void
+l2_pull_iqueue(struct FsmInst *fi, int event, void *arg)
+{
+	struct layer2	*l2 = fi->userdata;
+	struct sk_buff	*skb, *nskb, *oskb;
+	u_char		header[MAX_L2HEADER_LEN];
+	u_int		i, p1;
+
+	if (!cansend(l2))
+		return;
+
+	skb = skb_dequeue(&l2->i_queue);
+	if (!skb)
+		return;
+
+	if (test_bit(FLG_MOD128, &l2->flag))
+		p1 = (l2->vs - l2->va) % 128;
+	else
+		p1 = (l2->vs - l2->va) % 8;
+	p1 = (p1 + l2->sow) % l2->window;
+	if (l2->windowar[p1]) {
+		printk(KERN_WARNING "isdnl2 try overwrite ack queue entry %d\n",
+		    p1);
+		dev_kfree_skb(l2->windowar[p1]);
+	}
+	l2->windowar[p1] = skb;
+	i = sethdraddr(l2, header, CMD);
+	if (test_bit(FLG_MOD128, &l2->flag)) {
+		header[i++] = l2->vs << 1;
+		header[i++] = l2->vr << 1;
+		l2->vs = (l2->vs + 1) % 128;
+	} else {
+		header[i++] = (l2->vr << 5) | (l2->vs << 1);
+		l2->vs = (l2->vs + 1) % 8;
+	}
+
+	nskb = skb_clone(skb, GFP_ATOMIC);
+	p1 = skb_headroom(nskb);
+	if (p1 >= i)
+		memcpy(skb_push(nskb, i), header, i);
+	else {
+		printk(KERN_WARNING
+		    "isdnl2 pull_iqueue skb header(%d/%d) too short\n", i, p1);
+		oskb = nskb;
+		nskb = mI_alloc_skb(oskb->len + i, GFP_ATOMIC);
+		if (!nskb) {
+			dev_kfree_skb(oskb);
+			printk(KERN_WARNING "%s: no skb mem\n", __func__);
+			return;
+		}
+		memcpy(skb_put(nskb, i), header, i);
+		memcpy(skb_put(nskb, oskb->len), oskb->data, oskb->len);
+		dev_kfree_skb(oskb);
+	}
+	l2down(l2, PH_DATA_REQ, l2_newid(l2), nskb);
+	test_and_clear_bit(FLG_ACK_PEND, &l2->flag);
+	if (!test_and_set_bit(FLG_T200_RUN, &l2->flag)) {
+		mISDN_FsmDelTimer(&l2->t203, 13);
+		mISDN_FsmAddTimer(&l2->t200, l2->T200, EV_L2_T200, NULL, 11);
+	}
+}
+
+static void
+l2_st8_got_super(struct FsmInst *fi, int event, void *arg)
+{
+	struct layer2 *l2 = fi->userdata;
+	struct sk_buff *skb = arg;
+	int PollFlag, rsp, rnr = 0;
+	unsigned int nr;
+
+	rsp = *skb->data & 0x2;
+	if (test_bit(FLG_ORIG, &l2->flag))
+		rsp = !rsp;
+
+	skb_pull(skb, l2addrsize(l2));
+
+	if (IsRNR(skb->data, l2)) {
+		set_peer_busy(l2);
+		rnr = 1;
+	} else
+		clear_peer_busy(l2);
+
+	if (test_bit(FLG_MOD128, &l2->flag)) {
+		PollFlag = (skb->data[1] & 0x1) == 0x1;
+		nr = skb->data[1] >> 1;
+	} else {
+		PollFlag = (skb->data[0] & 0x10);
+		nr = (skb->data[0] >> 5) & 0x7;
+	}
+	dev_kfree_skb(skb);
+	if (rsp && PollFlag) {
+		if (legalnr(l2, nr)) {
+			if (rnr) {
+				restart_t200(l2, 15);
+			} else {
+				stop_t200(l2, 16);
+				mISDN_FsmAddTimer(&l2->t203, l2->T203,
+					    EV_L2_T203, NULL, 5);
+				setva(l2, nr);
+			}
+			invoke_retransmission(l2, nr);
+			mISDN_FsmChangeState(fi, ST_L2_7);
+			if (skb_queue_len(&l2->i_queue) && cansend(l2))
+				mISDN_FsmEvent(fi, EV_L2_ACK_PULL, NULL);
+		} else
+			nrerrorrecovery(fi);
+	} else {
+		if (!rsp && PollFlag)
+			enquiry_response(l2);
+		if (legalnr(l2, nr))
+			setva(l2, nr);
+		else
+			nrerrorrecovery(fi);
+	}
+}
+
+static void
+l2_got_FRMR(struct FsmInst *fi, int event, void *arg)
+{
+	struct layer2 *l2 = fi->userdata;
+	struct sk_buff *skb = arg;
+
+	skb_pull(skb, l2addrsize(l2) + 1);
+
+	if (!(skb->data[0] & 1) || ((skb->data[0] & 3) == 1) || /* I or S */
+	    (IsUA(skb->data) && (fi->state == ST_L2_7))) {
+		l2mgr(l2, MDL_ERROR_IND, (void *) 'K');
+		establishlink(fi);
+		test_and_clear_bit(FLG_L3_INIT, &l2->flag);
+	}
+	dev_kfree_skb(skb);
+}
+
+static void
+l2_st24_tei_remove(struct FsmInst *fi, int event, void *arg)
+{
+	struct layer2 *l2 = fi->userdata;
+
+	skb_queue_purge(&l2->ui_queue);
+	l2->tei = GROUP_TEI;
+	mISDN_FsmChangeState(fi, ST_L2_1);
+}
+
+static void
+l2_st3_tei_remove(struct FsmInst *fi, int event, void *arg)
+{
+	struct layer2 *l2 = fi->userdata;
+
+	skb_queue_purge(&l2->ui_queue);
+	l2->tei = GROUP_TEI;
+	l2up_create(l2, DL_RELEASE_IND, 0, NULL);
+	mISDN_FsmChangeState(fi, ST_L2_1);
+}
+
+static void
+l2_st5_tei_remove(struct FsmInst *fi, int event, void *arg)
+{
+	struct layer2 *l2 = fi->userdata;
+
+	skb_queue_purge(&l2->i_queue);
+	skb_queue_purge(&l2->ui_queue);
+	freewin(l2);
+	l2->tei = GROUP_TEI;
+	stop_t200(l2, 17);
+	st5_dl_release_l2l3(l2);
+	mISDN_FsmChangeState(fi, ST_L2_1);
+}
+
+static void
+l2_st6_tei_remove(struct FsmInst *fi, int event, void *arg)
+{
+	struct layer2 *l2 = fi->userdata;
+
+	skb_queue_purge(&l2->ui_queue);
+	l2->tei = GROUP_TEI;
+	stop_t200(l2, 18);
+	l2up_create(l2, DL_RELEASE_IND, 0, NULL);
+	mISDN_FsmChangeState(fi, ST_L2_1);
+}
+
+static void
+l2_tei_remove(struct FsmInst *fi, int event, void *arg)
+{
+	struct layer2 *l2 = fi->userdata;
+
+	skb_queue_purge(&l2->i_queue);
+	skb_queue_purge(&l2->ui_queue);
+	freewin(l2);
+	l2->tei = GROUP_TEI;
+	stop_t200(l2, 17);
+	mISDN_FsmDelTimer(&l2->t203, 19);
+	l2up_create(l2, DL_RELEASE_IND, 0, NULL);
+/*	mISDN_queue_data(&l2->inst, l2->inst.id | MSG_BROADCAST,
+ *		MGR_SHORTSTATUS_IND, SSTATUS_L2_RELEASED,
+ *		0, NULL, 0);
+ */
+	mISDN_FsmChangeState(fi, ST_L2_1);
+}
+
+static void
+l2_st14_persistant_da(struct FsmInst *fi, int event, void *arg)
+{
+	struct layer2 *l2 = fi->userdata;
+	struct sk_buff *skb = arg;
+
+	skb_queue_purge(&l2->i_queue);
+	skb_queue_purge(&l2->ui_queue);
+	if (test_and_clear_bit(FLG_ESTAB_PEND, &l2->flag))
+		l2up(l2, DL_RELEASE_IND, skb);
+	else
+		dev_kfree_skb(skb);
+}
+
+static void
+l2_st5_persistant_da(struct FsmInst *fi, int event, void *arg)
+{
+	struct layer2 *l2 = fi->userdata;
+	struct sk_buff *skb = arg;
+
+	skb_queue_purge(&l2->i_queue);
+	skb_queue_purge(&l2->ui_queue);
+	freewin(l2);
+	stop_t200(l2, 19);
+	st5_dl_release_l2l3(l2);
+	mISDN_FsmChangeState(fi, ST_L2_4);
+	if (l2->tm)
+		l2_tei(l2, MDL_STATUS_DOWN_IND, 0);
+	dev_kfree_skb(skb);
+}
+
+static void
+l2_st6_persistant_da(struct FsmInst *fi, int event, void *arg)
+{
+	struct layer2 *l2 = fi->userdata;
+	struct sk_buff *skb = arg;
+
+	skb_queue_purge(&l2->ui_queue);
+	stop_t200(l2, 20);
+	l2up(l2, DL_RELEASE_CNF, skb);
+	mISDN_FsmChangeState(fi, ST_L2_4);
+	if (l2->tm)
+		l2_tei(l2, MDL_STATUS_DOWN_IND, 0);
+}
+
+static void
+l2_persistant_da(struct FsmInst *fi, int event, void *arg)
+{
+	struct layer2 *l2 = fi->userdata;
+	struct sk_buff *skb = arg;
+
+	skb_queue_purge(&l2->i_queue);
+	skb_queue_purge(&l2->ui_queue);
+	freewin(l2);
+	stop_t200(l2, 19);
+	mISDN_FsmDelTimer(&l2->t203, 19);
+	l2up(l2, DL_RELEASE_IND, skb);
+	mISDN_FsmChangeState(fi, ST_L2_4);
+	if (l2->tm)
+		l2_tei(l2, MDL_STATUS_DOWN_IND, 0);
+}
+
+static void
+l2_set_own_busy(struct FsmInst *fi, int event, void *arg)
+{
+	struct layer2 *l2 = fi->userdata;
+	struct sk_buff *skb = arg;
+
+	if (!test_and_set_bit(FLG_OWN_BUSY, &l2->flag)) {
+		enquiry_cr(l2, RNR, RSP, 0);
+		test_and_clear_bit(FLG_ACK_PEND, &l2->flag);
+	}
+	if (skb)
+		dev_kfree_skb(skb);
+}
+
+static void
+l2_clear_own_busy(struct FsmInst *fi, int event, void *arg)
+{
+	struct layer2 *l2 = fi->userdata;
+	struct sk_buff *skb = arg;
+
+	if (!test_and_clear_bit(FLG_OWN_BUSY, &l2->flag)) {
+		enquiry_cr(l2, RR, RSP, 0);
+		test_and_clear_bit(FLG_ACK_PEND, &l2->flag);
+	}
+	if (skb)
+		dev_kfree_skb(skb);
+}
+
+static void
+l2_frame_error(struct FsmInst *fi, int event, void *arg)
+{
+	struct layer2 *l2 = fi->userdata;
+
+	l2mgr(l2, MDL_ERROR_IND, arg);
+}
+
+static void
+l2_frame_error_reest(struct FsmInst *fi, int event, void *arg)
+{
+	struct layer2 *l2 = fi->userdata;
+
+	l2mgr(l2, MDL_ERROR_IND, arg);
+	establishlink(fi);
+	test_and_clear_bit(FLG_L3_INIT, &l2->flag);
+}
+
+static struct FsmNode L2FnList[] =
+{
+	{ST_L2_1, EV_L2_DL_ESTABLISH_REQ, l2_mdl_assign},
+	{ST_L2_2, EV_L2_DL_ESTABLISH_REQ, l2_go_st3},
+	{ST_L2_4, EV_L2_DL_ESTABLISH_REQ, l2_establish},
+	{ST_L2_5, EV_L2_DL_ESTABLISH_REQ, l2_discard_i_setl3},
+	{ST_L2_7, EV_L2_DL_ESTABLISH_REQ, l2_l3_reestablish},
+	{ST_L2_8, EV_L2_DL_ESTABLISH_REQ, l2_l3_reestablish},
+	{ST_L2_4, EV_L2_DL_RELEASE_REQ, l2_release},
+	{ST_L2_5, EV_L2_DL_RELEASE_REQ, l2_pend_rel},
+	{ST_L2_7, EV_L2_DL_RELEASE_REQ, l2_disconnect},
+	{ST_L2_8, EV_L2_DL_RELEASE_REQ, l2_disconnect},
+	{ST_L2_5, EV_L2_DL_DATA, l2_feed_i_if_reest},
+	{ST_L2_7, EV_L2_DL_DATA, l2_feed_i_pull},
+	{ST_L2_8, EV_L2_DL_DATA, l2_feed_iqueue},
+	{ST_L2_1, EV_L2_DL_UNITDATA, l2_queue_ui_assign},
+	{ST_L2_2, EV_L2_DL_UNITDATA, l2_queue_ui},
+	{ST_L2_3, EV_L2_DL_UNITDATA, l2_queue_ui},
+	{ST_L2_4, EV_L2_DL_UNITDATA, l2_send_ui},
+	{ST_L2_5, EV_L2_DL_UNITDATA, l2_send_ui},
+	{ST_L2_6, EV_L2_DL_UNITDATA, l2_send_ui},
+	{ST_L2_7, EV_L2_DL_UNITDATA, l2_send_ui},
+	{ST_L2_8, EV_L2_DL_UNITDATA, l2_send_ui},
+	{ST_L2_1, EV_L2_MDL_ASSIGN, l2_got_tei},
+	{ST_L2_2, EV_L2_MDL_ASSIGN, l2_got_tei},
+	{ST_L2_3, EV_L2_MDL_ASSIGN, l2_got_tei},
+	{ST_L2_2, EV_L2_MDL_ERROR, l2_st24_tei_remove},
+	{ST_L2_3, EV_L2_MDL_ERROR, l2_st3_tei_remove},
+	{ST_L2_4, EV_L2_MDL_REMOVE, l2_st24_tei_remove},
+	{ST_L2_5, EV_L2_MDL_REMOVE, l2_st5_tei_remove},
+	{ST_L2_6, EV_L2_MDL_REMOVE, l2_st6_tei_remove},
+	{ST_L2_7, EV_L2_MDL_REMOVE, l2_tei_remove},
+	{ST_L2_8, EV_L2_MDL_REMOVE, l2_tei_remove},
+	{ST_L2_4, EV_L2_SABME, l2_start_multi},
+	{ST_L2_5, EV_L2_SABME, l2_send_UA},
+	{ST_L2_6, EV_L2_SABME, l2_send_DM},
+	{ST_L2_7, EV_L2_SABME, l2_restart_multi},
+	{ST_L2_8, EV_L2_SABME, l2_restart_multi},
+	{ST_L2_4, EV_L2_DISC, l2_send_DM},
+	{ST_L2_5, EV_L2_DISC, l2_send_DM},
+	{ST_L2_6, EV_L2_DISC, l2_send_UA},
+	{ST_L2_7, EV_L2_DISC, l2_stop_multi},
+	{ST_L2_8, EV_L2_DISC, l2_stop_multi},
+	{ST_L2_4, EV_L2_UA, l2_mdl_error_ua},
+	{ST_L2_5, EV_L2_UA, l2_connected},
+	{ST_L2_6, EV_L2_UA, l2_released},
+	{ST_L2_7, EV_L2_UA, l2_mdl_error_ua},
+	{ST_L2_8, EV_L2_UA, l2_mdl_error_ua},
+	{ST_L2_4, EV_L2_DM, l2_reestablish},
+	{ST_L2_5, EV_L2_DM, l2_st5_dm_release},
+	{ST_L2_6, EV_L2_DM, l2_st6_dm_release},
+	{ST_L2_7, EV_L2_DM, l2_mdl_error_dm},
+	{ST_L2_8, EV_L2_DM, l2_st8_mdl_error_dm},
+	{ST_L2_1, EV_L2_UI, l2_got_ui},
+	{ST_L2_2, EV_L2_UI, l2_got_ui},
+	{ST_L2_3, EV_L2_UI, l2_got_ui},
+	{ST_L2_4, EV_L2_UI, l2_got_ui},
+	{ST_L2_5, EV_L2_UI, l2_got_ui},
+	{ST_L2_6, EV_L2_UI, l2_got_ui},
+	{ST_L2_7, EV_L2_UI, l2_got_ui},
+	{ST_L2_8, EV_L2_UI, l2_got_ui},
+	{ST_L2_7, EV_L2_FRMR, l2_got_FRMR},
+	{ST_L2_8, EV_L2_FRMR, l2_got_FRMR},
+	{ST_L2_7, EV_L2_SUPER, l2_st7_got_super},
+	{ST_L2_8, EV_L2_SUPER, l2_st8_got_super},
+	{ST_L2_7, EV_L2_I, l2_got_iframe},
+	{ST_L2_8, EV_L2_I, l2_got_iframe},
+	{ST_L2_5, EV_L2_T200, l2_st5_tout_200},
+	{ST_L2_6, EV_L2_T200, l2_st6_tout_200},
+	{ST_L2_7, EV_L2_T200, l2_st7_tout_200},
+	{ST_L2_8, EV_L2_T200, l2_st8_tout_200},
+	{ST_L2_7, EV_L2_T203, l2_st7_tout_203},
+	{ST_L2_7, EV_L2_ACK_PULL, l2_pull_iqueue},
+	{ST_L2_7, EV_L2_SET_OWN_BUSY, l2_set_own_busy},
+	{ST_L2_8, EV_L2_SET_OWN_BUSY, l2_set_own_busy},
+	{ST_L2_7, EV_L2_CLEAR_OWN_BUSY, l2_clear_own_busy},
+	{ST_L2_8, EV_L2_CLEAR_OWN_BUSY, l2_clear_own_busy},
+	{ST_L2_4, EV_L2_FRAME_ERROR, l2_frame_error},
+	{ST_L2_5, EV_L2_FRAME_ERROR, l2_frame_error},
+	{ST_L2_6, EV_L2_FRAME_ERROR, l2_frame_error},
+	{ST_L2_7, EV_L2_FRAME_ERROR, l2_frame_error_reest},
+	{ST_L2_8, EV_L2_FRAME_ERROR, l2_frame_error_reest},
+	{ST_L2_1, EV_L1_DEACTIVATE, l2_st14_persistant_da},
+	{ST_L2_2, EV_L1_DEACTIVATE, l2_st24_tei_remove},
+	{ST_L2_3, EV_L1_DEACTIVATE, l2_st3_tei_remove},
+	{ST_L2_4, EV_L1_DEACTIVATE, l2_st14_persistant_da},
+	{ST_L2_5, EV_L1_DEACTIVATE, l2_st5_persistant_da},
+	{ST_L2_6, EV_L1_DEACTIVATE, l2_st6_persistant_da},
+	{ST_L2_7, EV_L1_DEACTIVATE, l2_persistant_da},
+	{ST_L2_8, EV_L1_DEACTIVATE, l2_persistant_da},
+};
+
+#define L2_FN_COUNT (sizeof(L2FnList)/sizeof(struct FsmNode))
+
+static int
+ph_data_indication(struct layer2 *l2, struct mISDNhead *hh, struct sk_buff *skb)
+{
+	u_char	*datap = skb->data;
+	int	ret = -EINVAL;
+	int	psapi, ptei;
+	u_int	l;
+	int	c = 0;
+
+	l = l2addrsize(l2);
+	if (skb->len <= l) {
+		mISDN_FsmEvent(&l2->l2m, EV_L2_FRAME_ERROR, (void *) 'N');
+		return ret;
+	}
+	if (test_bit(FLG_LAPD, &l2->flag)) { /* Maybe not needed */
+		psapi = *datap++;
+		ptei = *datap++;
+		if ((psapi & 1) || !(ptei & 1)) {
+			printk(KERN_WARNING
+			    "l2 D-channel frame wrong EA0/EA1\n");
+			return ret;
+		}
+		psapi >>= 2;
+		ptei >>= 1;
+		if (psapi != l2->sapi) {
+			/* not our bussiness
+			 * printk(KERN_DEBUG "%s: sapi %d/%d sapi mismatch\n",
+			 *  __func__,
+			 *	psapi, l2->sapi);
+			 */
+			dev_kfree_skb(skb);
+			return 0;
+		}
+		if ((ptei != l2->tei) && (ptei != GROUP_TEI)) {
+			/* not our bussiness
+			 * printk(KERN_DEBUG "%s: tei %d/%d sapi %d mismatch\n",
+			 *  __func__,
+			 *	ptei, l2->tei, psapi);
+			 */
+			dev_kfree_skb(skb);
+			return 0;
+		}
+	} else
+		datap += l;
+	if (!(*datap & 1)) {	/* I-Frame */
+		c = iframe_error(l2, skb);
+		if (!c)
+			ret = mISDN_FsmEvent(&l2->l2m, EV_L2_I, skb);
+	} else if (IsSFrame(datap, l2)) {	/* S-Frame */
+		c = super_error(l2, skb);
+		if (!c)
+			ret = mISDN_FsmEvent(&l2->l2m, EV_L2_SUPER, skb);
+	} else if (IsUI(datap)) {
+		c = UI_error(l2, skb);
+		if (!c)
+			ret = mISDN_FsmEvent(&l2->l2m, EV_L2_UI, skb);
+	} else if (IsSABME(datap, l2)) {
+		c = unnum_error(l2, skb, CMD);
+		if (!c)
+			ret = mISDN_FsmEvent(&l2->l2m, EV_L2_SABME, skb);
+	} else if (IsUA(datap)) {
+		c = unnum_error(l2, skb, RSP);
+		if (!c)
+			ret = mISDN_FsmEvent(&l2->l2m, EV_L2_UA, skb);
+	} else if (IsDISC(datap)) {
+		c = unnum_error(l2, skb, CMD);
+		if (!c)
+			ret = mISDN_FsmEvent(&l2->l2m, EV_L2_DISC, skb);
+	} else if (IsDM(datap)) {
+		c = unnum_error(l2, skb, RSP);
+		if (!c)
+			ret = mISDN_FsmEvent(&l2->l2m, EV_L2_DM, skb);
+	} else if (IsFRMR(datap)) {
+		c = FRMR_error(l2, skb);
+		if (!c)
+			ret = mISDN_FsmEvent(&l2->l2m, EV_L2_FRMR, skb);
+	} else
+		c = 'L';
+	if (c) {
+		printk(KERN_WARNING "l2 D-channel frame error %c\n", c);
+		mISDN_FsmEvent(&l2->l2m, EV_L2_FRAME_ERROR, (void *)(long)c);
+	}
+	return ret;
+}
+
+static int
+l2_send(struct mISDNchannel *ch, struct sk_buff *skb)
+{
+	struct layer2		*l2 = container_of(ch, struct layer2, ch);
+	struct mISDNhead	*hh =  mISDN_HEAD_P(skb);
+	int 			ret = -EINVAL;
+
+	if (*debug & DEBUG_L2_RECV)
+		printk(KERN_DEBUG "%s: prim(%x) id(%x) tei(%d)\n",
+		    __func__, hh->prim, hh->id, l2->tei);
+	switch (hh->prim) {
+	case PH_DATA_IND:
+		ret = ph_data_indication(l2, hh, skb);
+		break;
+	case PH_DATA_CNF:
+		ret = ph_data_confirm(l2, hh, skb);
+		break;
+	case PH_ACTIVATE_IND:
+		test_and_set_bit(FLG_L1_ACTIV, &l2->flag);
+		l2up_create(l2, MPH_ACTIVATE_IND, 0, NULL);
+		if (test_and_clear_bit(FLG_ESTAB_PEND, &l2->flag))
+			ret = mISDN_FsmEvent(&l2->l2m,
+				EV_L2_DL_ESTABLISH_REQ, skb);
+		break;
+	case PH_DEACTIVATE_IND:
+		test_and_clear_bit(FLG_L1_ACTIV, &l2->flag);
+		l2up_create(l2, MPH_DEACTIVATE_IND, 0, NULL);
+		ret = mISDN_FsmEvent(&l2->l2m, EV_L1_DEACTIVATE, skb);
+		break;
+	case MPH_INFORMATION_IND:
+		if (!l2->up)
+			break;
+		ret = l2->up->send(l2->up, skb);
+		break;
+	case DL_DATA_REQ:
+		ret = mISDN_FsmEvent(&l2->l2m, EV_L2_DL_DATA, skb);
+		break;
+	case DL_UNITDATA_REQ:
+		ret = mISDN_FsmEvent(&l2->l2m, EV_L2_DL_UNITDATA, skb);
+		break;
+	case DL_ESTABLISH_REQ:
+		if (test_bit(FLG_LAPB, &l2->flag))
+			test_and_set_bit(FLG_ORIG, &l2->flag);
+		if (test_bit(FLG_L1_ACTIV, &l2->flag)) {
+			if (test_bit(FLG_LAPD, &l2->flag) ||
+				test_bit(FLG_ORIG, &l2->flag))
+				ret = mISDN_FsmEvent(&l2->l2m,
+					EV_L2_DL_ESTABLISH_REQ, skb);
+		} else {
+			if (test_bit(FLG_LAPD, &l2->flag) ||
+				test_bit(FLG_ORIG, &l2->flag)) {
+				test_and_set_bit(FLG_ESTAB_PEND,
+					&l2->flag);
+			}
+			ret = l2down(l2, PH_ACTIVATE_REQ, l2_newid(l2),
+			    skb);
+		}
+		break;
+	case DL_RELEASE_REQ:
+		if (test_bit(FLG_LAPB, &l2->flag))
+			l2down_create(l2, PH_DEACTIVATE_REQ,
+				l2_newid(l2), 0, NULL);
+		ret = mISDN_FsmEvent(&l2->l2m, EV_L2_DL_RELEASE_REQ,
+		    skb);
+		break;
+	default:
+		if (*debug & DEBUG_L2)
+			l2m_debug(&l2->l2m, "l2 unknown pr %04x",
+			    hh->prim);
+	}
+	if (ret) {
+		dev_kfree_skb(skb);
+		ret = 0;
+	}
+	return ret;
+}
+
+int
+tei_l2(struct layer2 *l2, u_int cmd, u_long arg)
+{
+	int		ret = -EINVAL;
+
+	if (*debug & DEBUG_L2_TEI)
+		printk(KERN_DEBUG "%s: cmd(%x)\n", __func__, cmd);
+	switch (cmd) {
+	case (MDL_ASSIGN_REQ):
+		ret = mISDN_FsmEvent(&l2->l2m, EV_L2_MDL_ASSIGN, (void *)arg);
+		break;
+	case (MDL_REMOVE_REQ):
+		ret = mISDN_FsmEvent(&l2->l2m, EV_L2_MDL_REMOVE, NULL);
+		break;
+	case (MDL_ERROR_IND):
+		ret = mISDN_FsmEvent(&l2->l2m, EV_L2_MDL_ERROR, NULL);
+		break;
+	case (MDL_ERROR_RSP):
+		/* ETS 300-125 5.3.2.1 Test: TC13010 */
+		printk(KERN_NOTICE "MDL_ERROR|REQ (tei_l2)\n");
+		ret = mISDN_FsmEvent(&l2->l2m, EV_L2_MDL_ERROR, NULL);
+		break;
+	}
+	return ret;
+}
+
+static void
+release_l2(struct layer2 *l2)
+{
+	mISDN_FsmDelTimer(&l2->t200, 21);
+	mISDN_FsmDelTimer(&l2->t203, 16);
+	skb_queue_purge(&l2->i_queue);
+	skb_queue_purge(&l2->ui_queue);
+	skb_queue_purge(&l2->down_queue);
+	ReleaseWin(l2);
+	if (test_bit(FLG_LAPD, &l2->flag)) {
+		TEIrelease(l2);
+		if (l2->ch.st)
+			l2->ch.st->dev->D.ctrl(&l2->ch.st->dev->D,
+			    CLOSE_CHANNEL, NULL);
+	}
+	kfree(l2);
+}
+
+static int
+l2_ctrl(struct mISDNchannel *ch, u_int cmd, void *arg)
+{
+	struct layer2		*l2 = container_of(ch, struct layer2, ch);
+	u_int			info;
+
+	if (*debug & DEBUG_L2_CTRL)
+		printk(KERN_DEBUG "%s:(%x)\n", __func__, cmd);
+
+	switch (cmd) {
+	case OPEN_CHANNEL:
+		if (test_bit(FLG_LAPD, &l2->flag)) {
+			set_channel_address(&l2->ch, l2->sapi, l2->tei);
+			info = DL_INFO_L2_CONNECT;
+			l2up_create(l2, DL_INFORMATION_IND,
+			    sizeof(info), &info);
+		}
+		break;
+	case CLOSE_CHANNEL:
+		if (l2->ch.peer)
+			l2->ch.peer->ctrl(l2->ch.peer, CLOSE_CHANNEL, NULL);
+		release_l2(l2);
+		break;
+	}
+	return 0;
+}
+
+struct layer2 *
+create_l2(struct mISDNchannel *ch, u_int protocol, u_long options, u_long arg)
+{
+	struct layer2		*l2;
+	struct channel_req	rq;
+
+	l2 = kzalloc(sizeof(struct layer2), GFP_KERNEL);
+	if (!l2) {
+		printk(KERN_ERR "kzalloc layer2 failed\n");
+		return NULL;
+	}
+	l2->next_id = 1;
+	l2->down_id = MISDN_ID_NONE;
+	l2->up = ch;
+	l2->ch.st = ch->st;
+	l2->ch.send = l2_send;
+	l2->ch.ctrl = l2_ctrl;
+	switch (protocol) {
+	case ISDN_P_LAPD_NT:
+		test_and_set_bit(FLG_LAPD, &l2->flag);
+		test_and_set_bit(FLG_LAPD_NET, &l2->flag);
+		test_and_set_bit(FLG_MOD128, &l2->flag);
+		l2->sapi = 0;
+		l2->maxlen = MAX_DFRAME_LEN;
+		if (test_bit(OPTION_L2_PMX, &options))
+			l2->window = 7;
+		else
+			l2->window = 1;
+		if (test_bit(OPTION_L2_PTP, &options))
+			test_and_set_bit(FLG_PTP, &l2->flag);
+		if (test_bit(OPTION_L2_FIXEDTEI, &options))
+			test_and_set_bit(FLG_FIXED_TEI, &l2->flag);
+		l2->tei = (u_int)arg;
+		l2->T200 = 1000;
+		l2->N200 = 3;
+		l2->T203 = 10000;
+		if (test_bit(OPTION_L2_PMX, &options))
+			rq.protocol = ISDN_P_NT_E1;
+		else
+			rq.protocol = ISDN_P_NT_S0;
+		rq.adr.channel = 0;
+		l2->ch.st->dev->D.ctrl(&l2->ch.st->dev->D, OPEN_CHANNEL, &rq);
+		break;
+	case ISDN_P_LAPD_TE:
+		test_and_set_bit(FLG_LAPD, &l2->flag);
+		test_and_set_bit(FLG_MOD128, &l2->flag);
+		test_and_set_bit(FLG_ORIG, &l2->flag);
+		l2->sapi = 0;
+		l2->maxlen = MAX_DFRAME_LEN;
+		if (test_bit(OPTION_L2_PMX, &options))
+			l2->window = 7;
+		else
+			l2->window = 1;
+		if (test_bit(OPTION_L2_PTP, &options))
+			test_and_set_bit(FLG_PTP, &l2->flag);
+		if (test_bit(OPTION_L2_FIXEDTEI, &options))
+			test_and_set_bit(FLG_FIXED_TEI, &l2->flag);
+		l2->tei = (u_int)arg;
+		l2->T200 = 1000;
+		l2->N200 = 3;
+		l2->T203 = 10000;
+		if (test_bit(OPTION_L2_PMX, &options))
+			rq.protocol = ISDN_P_TE_E1;
+		else
+			rq.protocol = ISDN_P_TE_S0;
+		rq.adr.channel = 0;
+		l2->ch.st->dev->D.ctrl(&l2->ch.st->dev->D, OPEN_CHANNEL, &rq);
+		break;
+	case ISDN_P_B_X75SLP:
+		test_and_set_bit(FLG_LAPB, &l2->flag);
+		l2->window = 7;
+		l2->maxlen = MAX_DATA_SIZE;
+		l2->T200 = 1000;
+		l2->N200 = 4;
+		l2->T203 = 5000;
+		l2->addr.A = 3;
+		l2->addr.B = 1;
+		break;
+	default:
+		printk(KERN_ERR "layer2 create failed prt %x\n",
+			protocol);
+		kfree(l2);
+		return NULL;
+	}
+	skb_queue_head_init(&l2->i_queue);
+	skb_queue_head_init(&l2->ui_queue);
+	skb_queue_head_init(&l2->down_queue);
+	skb_queue_head_init(&l2->tmp_queue);
+	InitWin(l2);
+	l2->l2m.fsm = &l2fsm;
+	if (test_bit(FLG_LAPB, &l2->flag) ||
+		test_bit(FLG_PTP, &l2->flag) ||
+		test_bit(FLG_LAPD_NET, &l2->flag))
+		l2->l2m.state = ST_L2_4;
+	else
+		l2->l2m.state = ST_L2_1;
+	l2->l2m.debug = *debug;
+	l2->l2m.userdata = l2;
+	l2->l2m.userint = 0;
+	l2->l2m.printdebug = l2m_debug;
+
+	mISDN_FsmInitTimer(&l2->l2m, &l2->t200);
+	mISDN_FsmInitTimer(&l2->l2m, &l2->t203);
+	return l2;
+}
+
+static int
+x75create(struct channel_req *crq)
+{
+	struct layer2	*l2;
+
+	if (crq->protocol != ISDN_P_B_X75SLP)
+		return -EPROTONOSUPPORT;
+	l2 = create_l2(crq->ch, crq->protocol, 0, 0);
+	if (!l2)
+		return -ENOMEM;
+	crq->ch = &l2->ch;
+	crq->protocol = ISDN_P_B_HDLC;
+	return 0;
+}
+
+static struct Bprotocol X75SLP = {
+	.Bprotocols = (1 << (ISDN_P_B_X75SLP & ISDN_P_B_MASK)),
+	.name = "X75SLP",
+	.create = x75create
+};
+
+int
+Isdnl2_Init(u_int *deb)
+{
+	debug = deb;
+	mISDN_register_Bprotocol(&X75SLP);
+	l2fsm.state_count = L2_STATE_COUNT;
+	l2fsm.event_count = L2_EVENT_COUNT;
+	l2fsm.strEvent = strL2Event;
+	l2fsm.strState = strL2State;
+	mISDN_FsmNew(&l2fsm, L2FnList, ARRAY_SIZE(L2FnList));
+	TEIInit(deb);
+	return 0;
+}
+
+void
+Isdnl2_cleanup(void)
+{
+	mISDN_unregister_Bprotocol(&X75SLP);
+	TEIFree();
+	mISDN_FsmFree(&l2fsm);
+}
+
diff --git a/drivers/isdn/mISDN/layer2.h b/drivers/isdn/mISDN/layer2.h
new file mode 100644
index 000000000000..6293f80dc2d3
--- /dev/null
+++ b/drivers/isdn/mISDN/layer2.h
@@ -0,0 +1,140 @@
+/*
+ * Layer 2 defines
+ *
+ * Copyright 2008  by Karsten Keil <kkeil@novell.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <linux/mISDNif.h>
+#include <linux/skbuff.h>
+#include "fsm.h"
+
+#define MAX_WINDOW	8
+
+struct manager {
+	struct mISDNchannel	ch;
+	struct mISDNchannel	bcast;
+	u_long			options;
+	struct list_head	layer2;
+	rwlock_t		lock;
+	struct FsmInst		deact;
+	struct FsmTimer		datimer;
+	struct sk_buff_head	sendq;
+	struct mISDNchannel	*up;
+	u_int			nextid;
+	u_int			lastid;
+};
+
+struct teimgr {
+	int			ri;
+	int			rcnt;
+	struct FsmInst		tei_m;
+	struct FsmTimer		timer;
+	int			tval, nval;
+	struct layer2		*l2;
+	struct manager		*mgr;
+};
+
+struct laddr {
+	u_char	A;
+	u_char	B;
+};
+
+struct layer2 {
+	struct list_head	list;
+	struct mISDNchannel	ch;
+	u_long			flag;
+	int			id;
+	struct mISDNchannel	*up;
+	signed char		sapi;
+	signed char		tei;
+	struct laddr		addr;
+	u_int			maxlen;
+	struct teimgr		*tm;
+	u_int			vs, va, vr;
+	int			rc;
+	u_int			window;
+	u_int			sow;
+	struct FsmInst		l2m;
+	struct FsmTimer		t200, t203;
+	int			T200, N200, T203;
+	u_int			next_id;
+	u_int			down_id;
+	struct sk_buff		*windowar[MAX_WINDOW];
+	struct sk_buff_head	i_queue;
+	struct sk_buff_head	ui_queue;
+	struct sk_buff_head	down_queue;
+	struct sk_buff_head	tmp_queue;
+};
+
+enum {
+	ST_L2_1,
+	ST_L2_2,
+	ST_L2_3,
+	ST_L2_4,
+	ST_L2_5,
+	ST_L2_6,
+	ST_L2_7,
+	ST_L2_8,
+};
+
+#define L2_STATE_COUNT (ST_L2_8+1)
+
+extern struct layer2	*create_l2(struct mISDNchannel *, u_int,
+				u_long, u_long);
+extern int		tei_l2(struct layer2 *, u_int, u_long arg);
+
+
+/* from tei.c */
+extern int 		l2_tei(struct layer2 *, u_int, u_long arg);
+extern void 		TEIrelease(struct layer2 *);
+extern int 		TEIInit(u_int *);
+extern void 		TEIFree(void);
+
+#define MAX_L2HEADER_LEN 4
+
+#define RR	0x01
+#define RNR	0x05
+#define REJ	0x09
+#define SABME	0x6f
+#define SABM	0x2f
+#define DM	0x0f
+#define UI	0x03
+#define DISC	0x43
+#define UA	0x63
+#define FRMR	0x87
+#define XID	0xaf
+
+#define CMD	0
+#define RSP	1
+
+#define LC_FLUSH_WAIT 1
+
+#define FLG_LAPB	0
+#define FLG_LAPD	1
+#define FLG_ORIG	2
+#define FLG_MOD128	3
+#define FLG_PEND_REL	4
+#define FLG_L3_INIT	5
+#define FLG_T200_RUN	6
+#define FLG_ACK_PEND	7
+#define FLG_REJEXC	8
+#define FLG_OWN_BUSY	9
+#define FLG_PEER_BUSY	10
+#define FLG_DCHAN_BUSY	11
+#define FLG_L1_ACTIV	12
+#define FLG_ESTAB_PEND	13
+#define FLG_PTP		14
+#define FLG_FIXED_TEI	15
+#define FLG_L2BLOCK	16
+#define FLG_L1_NOTREADY	17
+#define FLG_LAPD_NET	18
diff --git a/drivers/isdn/mISDN/socket.c b/drivers/isdn/mISDN/socket.c
new file mode 100644
index 000000000000..e5a20f9542d1
--- /dev/null
+++ b/drivers/isdn/mISDN/socket.c
@@ -0,0 +1,781 @@
+/*
+ *
+ * Author	Karsten Keil <kkeil@novell.com>
+ *
+ * Copyright 2008  by Karsten Keil <kkeil@novell.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <linux/mISDNif.h>
+#include "core.h"
+
+static int	*debug;
+
+static struct proto mISDN_proto = {
+	.name		= "misdn",
+	.owner		= THIS_MODULE,
+	.obj_size	= sizeof(struct mISDN_sock)
+};
+
+#define _pms(sk)	((struct mISDN_sock *)sk)
+
+static struct mISDN_sock_list	data_sockets = {
+	.lock = __RW_LOCK_UNLOCKED(data_sockets.lock)
+};
+
+static struct mISDN_sock_list	base_sockets = {
+	.lock = __RW_LOCK_UNLOCKED(base_sockets.lock)
+};
+
+#define L2_HEADER_LEN	4
+
+static inline struct sk_buff *
+_l2_alloc_skb(unsigned int len, gfp_t gfp_mask)
+{
+	struct sk_buff  *skb;
+
+	skb = alloc_skb(len + L2_HEADER_LEN, gfp_mask);
+	if (likely(skb))
+		skb_reserve(skb, L2_HEADER_LEN);
+	return skb;
+}
+
+static void
+mISDN_sock_link(struct mISDN_sock_list *l, struct sock *sk)
+{
+	write_lock_bh(&l->lock);
+	sk_add_node(sk, &l->head);
+	write_unlock_bh(&l->lock);
+}
+
+static void mISDN_sock_unlink(struct mISDN_sock_list *l, struct sock *sk)
+{
+	write_lock_bh(&l->lock);
+	sk_del_node_init(sk);
+	write_unlock_bh(&l->lock);
+}
+
+static int
+mISDN_send(struct mISDNchannel *ch, struct sk_buff *skb)
+{
+	struct mISDN_sock *msk;
+	int	err;
+
+	msk = container_of(ch, struct mISDN_sock, ch);
+	if (*debug & DEBUG_SOCKET)
+		printk(KERN_DEBUG "%s len %d %p\n", __func__, skb->len, skb);
+	if (msk->sk.sk_state == MISDN_CLOSED)
+		return -EUNATCH;
+	__net_timestamp(skb);
+	err = sock_queue_rcv_skb(&msk->sk, skb);
+	if (err)
+		printk(KERN_WARNING "%s: error %d\n", __func__, err);
+	return err;
+}
+
+static int
+mISDN_ctrl(struct mISDNchannel *ch, u_int cmd, void *arg)
+{
+	struct mISDN_sock *msk;
+
+	msk = container_of(ch, struct mISDN_sock, ch);
+	if (*debug & DEBUG_SOCKET)
+		printk(KERN_DEBUG "%s(%p, %x, %p)\n", __func__, ch, cmd, arg);
+	switch (cmd) {
+	case CLOSE_CHANNEL:
+		msk->sk.sk_state = MISDN_CLOSED;
+		break;
+	}
+	return 0;
+}
+
+static inline void
+mISDN_sock_cmsg(struct sock *sk, struct msghdr *msg, struct sk_buff *skb)
+{
+	struct timeval	tv;
+
+	if (_pms(sk)->cmask & MISDN_TIME_STAMP) {
+		skb_get_timestamp(skb, &tv);
+		put_cmsg(msg, SOL_MISDN, MISDN_TIME_STAMP, sizeof(tv), &tv);
+	}
+}
+
+static int
+mISDN_sock_recvmsg(struct kiocb *iocb, struct socket *sock,
+    struct msghdr *msg, size_t len, int flags)
+{
+	struct sk_buff		*skb;
+	struct sock		*sk = sock->sk;
+	struct sockaddr_mISDN	*maddr;
+
+	int		copied, err;
+
+	if (*debug & DEBUG_SOCKET)
+		printk(KERN_DEBUG "%s: len %d, flags %x ch.nr %d, proto %x\n",
+			__func__, (int)len, flags, _pms(sk)->ch.nr,
+			sk->sk_protocol);
+	if (flags & (MSG_OOB))
+		return -EOPNOTSUPP;
+
+	if (sk->sk_state == MISDN_CLOSED)
+		return 0;
+
+	skb = skb_recv_datagram(sk, flags, flags & MSG_DONTWAIT, &err);
+	if (!skb)
+		return err;
+
+	if (msg->msg_namelen >= sizeof(struct sockaddr_mISDN)) {
+		msg->msg_namelen = sizeof(struct sockaddr_mISDN);
+		maddr = (struct sockaddr_mISDN *)msg->msg_name;
+		maddr->family = AF_ISDN;
+		maddr->dev = _pms(sk)->dev->id;
+		if ((sk->sk_protocol == ISDN_P_LAPD_TE) ||
+		    (sk->sk_protocol == ISDN_P_LAPD_NT)) {
+			maddr->channel = (mISDN_HEAD_ID(skb) >> 16) & 0xff;
+			maddr->tei =  (mISDN_HEAD_ID(skb) >> 8) & 0xff;
+			maddr->sapi = mISDN_HEAD_ID(skb) & 0xff;
+		} else {
+			maddr->channel = _pms(sk)->ch.nr;
+			maddr->sapi = _pms(sk)->ch.addr & 0xFF;
+			maddr->tei =  (_pms(sk)->ch.addr >> 8) & 0xFF;
+		}
+	} else {
+		if (msg->msg_namelen)
+			printk(KERN_WARNING "%s: too small namelen %d\n",
+			    __func__, msg->msg_namelen);
+		msg->msg_namelen = 0;
+	}
+
+	copied = skb->len + MISDN_HEADER_LEN;
+	if (len < copied) {
+		if (flags & MSG_PEEK)
+			atomic_dec(&skb->users);
+		else
+			skb_queue_head(&sk->sk_receive_queue, skb);
+		return -ENOSPC;
+	}
+	memcpy(skb_push(skb, MISDN_HEADER_LEN), mISDN_HEAD_P(skb),
+	    MISDN_HEADER_LEN);
+
+	err = skb_copy_datagram_iovec(skb, 0, msg->msg_iov, copied);
+
+	mISDN_sock_cmsg(sk, msg, skb);
+
+	skb_free_datagram(sk, skb);
+
+	return err ? : copied;
+}
+
+static int
+mISDN_sock_sendmsg(struct kiocb *iocb, struct socket *sock,
+    struct msghdr *msg, size_t len)
+{
+	struct sock		*sk = sock->sk;
+	struct sk_buff		*skb;
+	int			err = -ENOMEM;
+	struct sockaddr_mISDN	*maddr;
+
+	if (*debug & DEBUG_SOCKET)
+		printk(KERN_DEBUG "%s: len %d flags %x ch %d proto %x\n",
+		     __func__, (int)len, msg->msg_flags, _pms(sk)->ch.nr,
+		     sk->sk_protocol);
+
+	if (msg->msg_flags & MSG_OOB)
+		return -EOPNOTSUPP;
+
+	if (msg->msg_flags & ~(MSG_DONTWAIT|MSG_NOSIGNAL|MSG_ERRQUEUE))
+		return -EINVAL;
+
+	if (len < MISDN_HEADER_LEN)
+		return -EINVAL;
+
+	if (sk->sk_state != MISDN_BOUND)
+		return -EBADFD;
+
+	lock_sock(sk);
+
+	skb = _l2_alloc_skb(len, GFP_KERNEL);
+	if (!skb)
+		goto done;
+
+	if (memcpy_fromiovec(skb_put(skb, len), msg->msg_iov, len)) {
+		err = -EFAULT;
+		goto drop;
+	}
+
+	memcpy(mISDN_HEAD_P(skb), skb->data, MISDN_HEADER_LEN);
+	skb_pull(skb, MISDN_HEADER_LEN);
+
+	if (msg->msg_namelen >= sizeof(struct sockaddr_mISDN)) {
+		/* if we have a address, we use it */
+		maddr = (struct sockaddr_mISDN *)msg->msg_name;
+		mISDN_HEAD_ID(skb) = maddr->channel;
+	} else { /* use default for L2 messages */
+		if ((sk->sk_protocol == ISDN_P_LAPD_TE) ||
+		    (sk->sk_protocol == ISDN_P_LAPD_NT))
+		    mISDN_HEAD_ID(skb) = _pms(sk)->ch.nr;
+	}
+
+	if (*debug & DEBUG_SOCKET)
+		printk(KERN_DEBUG "%s: ID:%x\n",
+		     __func__, mISDN_HEAD_ID(skb));
+
+	err = -ENODEV;
+	if (!_pms(sk)->ch.peer ||
+	    (err = _pms(sk)->ch.recv(_pms(sk)->ch.peer, skb)))
+		goto drop;
+
+	err = len;
+
+done:
+	release_sock(sk);
+	return err;
+
+drop:
+	kfree_skb(skb);
+	goto done;
+}
+
+static int
+data_sock_release(struct socket *sock)
+{
+	struct sock *sk = sock->sk;
+
+	if (*debug & DEBUG_SOCKET)
+		printk(KERN_DEBUG "%s(%p) sk=%p\n", __func__, sock, sk);
+	if (!sk)
+		return 0;
+	switch (sk->sk_protocol) {
+	case ISDN_P_TE_S0:
+	case ISDN_P_NT_S0:
+	case ISDN_P_TE_E1:
+	case ISDN_P_NT_E1:
+		if (sk->sk_state == MISDN_BOUND)
+			delete_channel(&_pms(sk)->ch);
+		else
+			mISDN_sock_unlink(&data_sockets, sk);
+		break;
+	case ISDN_P_LAPD_TE:
+	case ISDN_P_LAPD_NT:
+	case ISDN_P_B_RAW:
+	case ISDN_P_B_HDLC:
+	case ISDN_P_B_X75SLP:
+	case ISDN_P_B_L2DTMF:
+	case ISDN_P_B_L2DSP:
+	case ISDN_P_B_L2DSPHDLC:
+		delete_channel(&_pms(sk)->ch);
+		mISDN_sock_unlink(&data_sockets, sk);
+		break;
+	}
+
+	lock_sock(sk);
+
+	sock_orphan(sk);
+	skb_queue_purge(&sk->sk_receive_queue);
+
+	release_sock(sk);
+	sock_put(sk);
+
+	return 0;
+}
+
+static int
+data_sock_ioctl_bound(struct sock *sk, unsigned int cmd, void __user *p)
+{
+	struct mISDN_ctrl_req	cq;
+	int			err = -EINVAL, val;
+	struct mISDNchannel	*bchan, *next;
+
+	lock_sock(sk);
+	if (!_pms(sk)->dev) {
+		err = -ENODEV;
+		goto done;
+	}
+	switch (cmd) {
+	case IMCTRLREQ:
+		if (copy_from_user(&cq, p, sizeof(cq))) {
+			err = -EFAULT;
+			break;
+		}
+		if ((sk->sk_protocol & ~ISDN_P_B_MASK) == ISDN_P_B_START) {
+			list_for_each_entry_safe(bchan, next,
+				&_pms(sk)->dev->bchannels, list) {
+				if (bchan->nr == cq.channel) {
+					err = bchan->ctrl(bchan,
+						CONTROL_CHANNEL, &cq);
+					break;
+				}
+			}
+		} else
+			err = _pms(sk)->dev->D.ctrl(&_pms(sk)->dev->D,
+				CONTROL_CHANNEL, &cq);
+		if (err)
+			break;
+		if (copy_to_user(p, &cq, sizeof(cq)))
+			err = -EFAULT;
+		break;
+	case IMCLEAR_L2:
+		if (sk->sk_protocol != ISDN_P_LAPD_NT) {
+			err = -EINVAL;
+			break;
+		}
+		if (get_user(val, (int __user *)p)) {
+			err = -EFAULT;
+			break;
+		}
+		err = _pms(sk)->dev->teimgr->ctrl(_pms(sk)->dev->teimgr,
+		    CONTROL_CHANNEL, &val);
+		break;
+	default:
+		err = -EINVAL;
+		break;
+	}
+done:
+	release_sock(sk);
+	return err;
+}
+
+static int
+data_sock_ioctl(struct socket *sock, unsigned int cmd, unsigned long arg)
+{
+	int 			err = 0, id;
+	struct sock		*sk = sock->sk;
+	struct mISDNdevice	*dev;
+	struct mISDNversion	ver;
+
+	switch (cmd) {
+	case IMGETVERSION:
+		ver.major = MISDN_MAJOR_VERSION;
+		ver.minor = MISDN_MINOR_VERSION;
+		ver.release = MISDN_RELEASE;
+		if (copy_to_user((void __user *)arg, &ver, sizeof(ver)))
+			err = -EFAULT;
+		break;
+	case IMGETCOUNT:
+		id = get_mdevice_count();
+		if (put_user(id, (int __user *)arg))
+			err = -EFAULT;
+		break;
+	case IMGETDEVINFO:
+		if (get_user(id, (int __user *)arg)) {
+			err = -EFAULT;
+			break;
+		}
+		dev = get_mdevice(id);
+		if (dev) {
+			struct mISDN_devinfo di;
+
+			di.id = dev->id;
+			di.Dprotocols = dev->Dprotocols;
+			di.Bprotocols = dev->Bprotocols | get_all_Bprotocols();
+			di.protocol = dev->D.protocol;
+			memcpy(di.channelmap, dev->channelmap,
+				sizeof(di.channelmap));
+			di.nrbchan = dev->nrbchan;
+			strcpy(di.name, dev->name);
+			if (copy_to_user((void __user *)arg, &di, sizeof(di)))
+				err = -EFAULT;
+		} else
+			err = -ENODEV;
+		break;
+	default:
+		if (sk->sk_state == MISDN_BOUND)
+			err = data_sock_ioctl_bound(sk, cmd,
+				(void __user *)arg);
+		else
+			err = -ENOTCONN;
+	}
+	return err;
+}
+
+static int data_sock_setsockopt(struct socket *sock, int level, int optname,
+	char __user *optval, int len)
+{
+	struct sock *sk = sock->sk;
+	int err = 0, opt = 0;
+
+	if (*debug & DEBUG_SOCKET)
+		printk(KERN_DEBUG "%s(%p, %d, %x, %p, %d)\n", __func__, sock,
+		    level, optname, optval, len);
+
+	lock_sock(sk);
+
+	switch (optname) {
+	case MISDN_TIME_STAMP:
+		if (get_user(opt, (int __user *)optval)) {
+			err = -EFAULT;
+			break;
+		}
+
+		if (opt)
+			_pms(sk)->cmask |= MISDN_TIME_STAMP;
+		else
+			_pms(sk)->cmask &= ~MISDN_TIME_STAMP;
+		break;
+	default:
+		err = -ENOPROTOOPT;
+		break;
+	}
+	release_sock(sk);
+	return err;
+}
+
+static int data_sock_getsockopt(struct socket *sock, int level, int optname,
+	char __user *optval, int __user *optlen)
+{
+	struct sock *sk = sock->sk;
+	int len, opt;
+
+	if (get_user(len, optlen))
+		return -EFAULT;
+
+	switch (optname) {
+	case MISDN_TIME_STAMP:
+		if (_pms(sk)->cmask & MISDN_TIME_STAMP)
+			opt = 1;
+		else
+			opt = 0;
+
+		if (put_user(opt, optval))
+			return -EFAULT;
+		break;
+	default:
+		return -ENOPROTOOPT;
+	}
+
+	return 0;
+}
+
+static int
+data_sock_bind(struct socket *sock, struct sockaddr *addr, int addr_len)
+{
+	struct sockaddr_mISDN *maddr = (struct sockaddr_mISDN *) addr;
+	struct sock *sk = sock->sk;
+	int err = 0;
+
+	if (*debug & DEBUG_SOCKET)
+		printk(KERN_DEBUG "%s(%p) sk=%p\n", __func__, sock, sk);
+	if (addr_len != sizeof(struct sockaddr_mISDN))
+		return -EINVAL;
+	if (!maddr || maddr->family != AF_ISDN)
+		return -EINVAL;
+
+	lock_sock(sk);
+
+	if (_pms(sk)->dev) {
+		err = -EALREADY;
+		goto done;
+	}
+	_pms(sk)->dev = get_mdevice(maddr->dev);
+	if (!_pms(sk)->dev) {
+		err = -ENODEV;
+		goto done;
+	}
+	_pms(sk)->ch.send = mISDN_send;
+	_pms(sk)->ch.ctrl = mISDN_ctrl;
+
+	switch (sk->sk_protocol) {
+	case ISDN_P_TE_S0:
+	case ISDN_P_NT_S0:
+	case ISDN_P_TE_E1:
+	case ISDN_P_NT_E1:
+		mISDN_sock_unlink(&data_sockets, sk);
+		err = connect_layer1(_pms(sk)->dev, &_pms(sk)->ch,
+		    sk->sk_protocol, maddr);
+		if (err)
+			mISDN_sock_link(&data_sockets, sk);
+		break;
+	case ISDN_P_LAPD_TE:
+	case ISDN_P_LAPD_NT:
+		err = create_l2entity(_pms(sk)->dev, &_pms(sk)->ch,
+		    sk->sk_protocol, maddr);
+		break;
+	case ISDN_P_B_RAW:
+	case ISDN_P_B_HDLC:
+	case ISDN_P_B_X75SLP:
+	case ISDN_P_B_L2DTMF:
+	case ISDN_P_B_L2DSP:
+	case ISDN_P_B_L2DSPHDLC:
+		err = connect_Bstack(_pms(sk)->dev, &_pms(sk)->ch,
+		    sk->sk_protocol, maddr);
+		break;
+	default:
+		err = -EPROTONOSUPPORT;
+	}
+	if (err)
+		goto done;
+	sk->sk_state = MISDN_BOUND;
+	_pms(sk)->ch.protocol = sk->sk_protocol;
+
+done:
+	release_sock(sk);
+	return err;
+}
+
+static int
+data_sock_getname(struct socket *sock, struct sockaddr *addr,
+    int *addr_len, int peer)
+{
+	struct sockaddr_mISDN 	*maddr = (struct sockaddr_mISDN *) addr;
+	struct sock		*sk = sock->sk;
+
+	if (!_pms(sk)->dev)
+		return -EBADFD;
+
+	lock_sock(sk);
+
+	*addr_len = sizeof(*maddr);
+	maddr->dev = _pms(sk)->dev->id;
+	maddr->channel = _pms(sk)->ch.nr;
+	maddr->sapi = _pms(sk)->ch.addr & 0xff;
+	maddr->tei = (_pms(sk)->ch.addr >> 8) & 0xff;
+	release_sock(sk);
+	return 0;
+}
+
+static const struct proto_ops data_sock_ops = {
+	.family		= PF_ISDN,
+	.owner		= THIS_MODULE,
+	.release	= data_sock_release,
+	.ioctl		= data_sock_ioctl,
+	.bind		= data_sock_bind,
+	.getname	= data_sock_getname,
+	.sendmsg	= mISDN_sock_sendmsg,
+	.recvmsg	= mISDN_sock_recvmsg,
+	.poll		= datagram_poll,
+	.listen		= sock_no_listen,
+	.shutdown	= sock_no_shutdown,
+	.setsockopt	= data_sock_setsockopt,
+	.getsockopt	= data_sock_getsockopt,
+	.connect	= sock_no_connect,
+	.socketpair	= sock_no_socketpair,
+	.accept		= sock_no_accept,
+	.mmap		= sock_no_mmap
+};
+
+static int
+data_sock_create(struct net *net, struct socket *sock, int protocol)
+{
+	struct sock *sk;
+
+	if (sock->type != SOCK_DGRAM)
+		return -ESOCKTNOSUPPORT;
+
+	sk = sk_alloc(net, PF_ISDN, GFP_KERNEL, &mISDN_proto);
+	if (!sk)
+		return -ENOMEM;
+
+	sock_init_data(sock, sk);
+
+	sock->ops = &data_sock_ops;
+	sock->state = SS_UNCONNECTED;
+	sock_reset_flag(sk, SOCK_ZAPPED);
+
+	sk->sk_protocol = protocol;
+	sk->sk_state    = MISDN_OPEN;
+	mISDN_sock_link(&data_sockets, sk);
+
+	return 0;
+}
+
+static int
+base_sock_release(struct socket *sock)
+{
+	struct sock *sk = sock->sk;
+
+	printk(KERN_DEBUG "%s(%p) sk=%p\n", __func__, sock, sk);
+	if (!sk)
+		return 0;
+
+	mISDN_sock_unlink(&base_sockets, sk);
+	sock_orphan(sk);
+	sock_put(sk);
+
+	return 0;
+}
+
+static int
+base_sock_ioctl(struct socket *sock, unsigned int cmd, unsigned long arg)
+{
+	int 			err = 0, id;
+	struct mISDNdevice	*dev;
+	struct mISDNversion	ver;
+
+	switch (cmd) {
+	case IMGETVERSION:
+		ver.major = MISDN_MAJOR_VERSION;
+		ver.minor = MISDN_MINOR_VERSION;
+		ver.release = MISDN_RELEASE;
+		if (copy_to_user((void __user *)arg, &ver, sizeof(ver)))
+			err = -EFAULT;
+		break;
+	case IMGETCOUNT:
+		id = get_mdevice_count();
+		if (put_user(id, (int __user *)arg))
+			err = -EFAULT;
+		break;
+	case IMGETDEVINFO:
+		if (get_user(id, (int __user *)arg)) {
+			err = -EFAULT;
+			break;
+		}
+		dev = get_mdevice(id);
+		if (dev) {
+			struct mISDN_devinfo di;
+
+			di.id = dev->id;
+			di.Dprotocols = dev->Dprotocols;
+			di.Bprotocols = dev->Bprotocols | get_all_Bprotocols();
+			di.protocol = dev->D.protocol;
+			memcpy(di.channelmap, dev->channelmap,
+				sizeof(di.channelmap));
+			di.nrbchan = dev->nrbchan;
+			strcpy(di.name, dev->name);
+			if (copy_to_user((void __user *)arg, &di, sizeof(di)))
+				err = -EFAULT;
+		} else
+			err = -ENODEV;
+		break;
+	default:
+		err = -EINVAL;
+	}
+	return err;
+}
+
+static int
+base_sock_bind(struct socket *sock, struct sockaddr *addr, int addr_len)
+{
+	struct sockaddr_mISDN *maddr = (struct sockaddr_mISDN *) addr;
+	struct sock *sk = sock->sk;
+	int err = 0;
+
+	if (!maddr || maddr->family != AF_ISDN)
+		return -EINVAL;
+
+	lock_sock(sk);
+
+	if (_pms(sk)->dev) {
+		err = -EALREADY;
+		goto done;
+	}
+
+	_pms(sk)->dev = get_mdevice(maddr->dev);
+	if (!_pms(sk)->dev) {
+		err = -ENODEV;
+		goto done;
+	}
+	sk->sk_state = MISDN_BOUND;
+
+done:
+	release_sock(sk);
+	return err;
+}
+
+static const struct proto_ops base_sock_ops = {
+	.family		= PF_ISDN,
+	.owner		= THIS_MODULE,
+	.release	= base_sock_release,
+	.ioctl		= base_sock_ioctl,
+	.bind		= base_sock_bind,
+	.getname	= sock_no_getname,
+	.sendmsg	= sock_no_sendmsg,
+	.recvmsg	= sock_no_recvmsg,
+	.poll		= sock_no_poll,
+	.listen		= sock_no_listen,
+	.shutdown	= sock_no_shutdown,
+	.setsockopt	= sock_no_setsockopt,
+	.getsockopt	= sock_no_getsockopt,
+	.connect	= sock_no_connect,
+	.socketpair	= sock_no_socketpair,
+	.accept		= sock_no_accept,
+	.mmap		= sock_no_mmap
+};
+
+
+static int
+base_sock_create(struct net *net, struct socket *sock, int protocol)
+{
+	struct sock *sk;
+
+	if (sock->type != SOCK_RAW)
+		return -ESOCKTNOSUPPORT;
+
+	sk = sk_alloc(net, PF_ISDN, GFP_KERNEL, &mISDN_proto);
+	if (!sk)
+		return -ENOMEM;
+
+	sock_init_data(sock, sk);
+	sock->ops = &base_sock_ops;
+	sock->state = SS_UNCONNECTED;
+	sock_reset_flag(sk, SOCK_ZAPPED);
+	sk->sk_protocol = protocol;
+	sk->sk_state    = MISDN_OPEN;
+	mISDN_sock_link(&base_sockets, sk);
+
+	return 0;
+}
+
+static int
+mISDN_sock_create(struct net *net, struct socket *sock, int proto)
+{
+	int err = -EPROTONOSUPPORT;
+
+	switch	(proto) {
+	case ISDN_P_BASE:
+		err = base_sock_create(net, sock, proto);
+		break;
+	case ISDN_P_TE_S0:
+	case ISDN_P_NT_S0:
+	case ISDN_P_TE_E1:
+	case ISDN_P_NT_E1:
+	case ISDN_P_LAPD_TE:
+	case ISDN_P_LAPD_NT:
+	case ISDN_P_B_RAW:
+	case ISDN_P_B_HDLC:
+	case ISDN_P_B_X75SLP:
+	case ISDN_P_B_L2DTMF:
+	case ISDN_P_B_L2DSP:
+	case ISDN_P_B_L2DSPHDLC:
+		err = data_sock_create(net, sock, proto);
+		break;
+	default:
+		return err;
+	}
+
+	return err;
+}
+
+static struct
+net_proto_family mISDN_sock_family_ops = {
+	.owner  = THIS_MODULE,
+	.family = PF_ISDN,
+	.create = mISDN_sock_create,
+};
+
+int
+misdn_sock_init(u_int *deb)
+{
+	int err;
+
+	debug = deb;
+	err = sock_register(&mISDN_sock_family_ops);
+	if (err)
+		printk(KERN_ERR "%s: error(%d)\n", __func__, err);
+	return err;
+}
+
+void
+misdn_sock_cleanup(void)
+{
+	sock_unregister(PF_ISDN);
+}
+
diff --git a/drivers/isdn/mISDN/stack.c b/drivers/isdn/mISDN/stack.c
new file mode 100644
index 000000000000..54cfddcc4784
--- /dev/null
+++ b/drivers/isdn/mISDN/stack.c
@@ -0,0 +1,674 @@
+/*
+ *
+ * Author	Karsten Keil <kkeil@novell.com>
+ *
+ * Copyright 2008  by Karsten Keil <kkeil@novell.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <linux/mISDNif.h>
+#include <linux/kthread.h>
+#include "core.h"
+
+static u_int	*debug;
+
+static inline void
+_queue_message(struct mISDNstack *st, struct sk_buff *skb)
+{
+	struct mISDNhead	*hh = mISDN_HEAD_P(skb);
+
+	if (*debug & DEBUG_QUEUE_FUNC)
+		printk(KERN_DEBUG "%s prim(%x) id(%x) %p\n",
+		    __func__, hh->prim, hh->id, skb);
+	skb_queue_tail(&st->msgq, skb);
+	if (likely(!test_bit(mISDN_STACK_STOPPED, &st->status))) {
+		test_and_set_bit(mISDN_STACK_WORK, &st->status);
+		wake_up_interruptible(&st->workq);
+	}
+}
+
+int
+mISDN_queue_message(struct mISDNchannel *ch, struct sk_buff *skb)
+{
+	_queue_message(ch->st, skb);
+	return 0;
+}
+
+static struct mISDNchannel *
+get_channel4id(struct mISDNstack *st, u_int id)
+{
+	struct mISDNchannel	*ch;
+
+	mutex_lock(&st->lmutex);
+	list_for_each_entry(ch, &st->layer2, list) {
+		if (id == ch->nr)
+			goto unlock;
+	}
+	ch = NULL;
+unlock:
+	mutex_unlock(&st->lmutex);
+	return ch;
+}
+
+static void
+send_socklist(struct mISDN_sock_list *sl, struct sk_buff *skb)
+{
+	struct hlist_node	*node;
+	struct sock		*sk;
+	struct sk_buff		*cskb = NULL;
+
+	read_lock(&sl->lock);
+	sk_for_each(sk, node, &sl->head) {
+		if (sk->sk_state != MISDN_BOUND)
+			continue;
+		if (!cskb)
+			cskb = skb_copy(skb, GFP_KERNEL);
+		if (!cskb) {
+			printk(KERN_WARNING "%s no skb\n", __func__);
+			break;
+		}
+		if (!sock_queue_rcv_skb(sk, cskb))
+			cskb = NULL;
+	}
+	read_unlock(&sl->lock);
+	if (cskb)
+		dev_kfree_skb(cskb);
+}
+
+static void
+send_layer2(struct mISDNstack *st, struct sk_buff *skb)
+{
+	struct sk_buff		*cskb;
+	struct mISDNhead	*hh = mISDN_HEAD_P(skb);
+	struct mISDNchannel	*ch;
+	int			ret;
+
+	if (!st)
+		return;
+	mutex_lock(&st->lmutex);
+	if ((hh->id & MISDN_ID_ADDR_MASK) == MISDN_ID_ANY) { /* L2 for all */
+		list_for_each_entry(ch, &st->layer2, list) {
+			if (list_is_last(&ch->list, &st->layer2)) {
+				cskb = skb;
+				skb = NULL;
+			} else {
+				cskb = skb_copy(skb, GFP_KERNEL);
+			}
+			if (cskb) {
+				ret = ch->send(ch, cskb);
+				if (ret) {
+					if (*debug & DEBUG_SEND_ERR)
+						printk(KERN_DEBUG
+						    "%s ch%d prim(%x) addr(%x)"
+						    " err %d\n",
+						    __func__, ch->nr,
+						    hh->prim, ch->addr, ret);
+					dev_kfree_skb(cskb);
+				}
+			} else {
+				printk(KERN_WARNING "%s ch%d addr %x no mem\n",
+				    __func__, ch->nr, ch->addr);
+				goto out;
+			}
+		}
+	} else {
+		list_for_each_entry(ch, &st->layer2, list) {
+			if ((hh->id & MISDN_ID_ADDR_MASK) == ch->addr) {
+				ret = ch->send(ch, skb);
+				if (!ret)
+					skb = NULL;
+				goto out;
+			}
+		}
+		ret = st->dev->teimgr->ctrl(st->dev->teimgr, CHECK_DATA, skb);
+		if (!ret)
+			skb = NULL;
+		else if (*debug & DEBUG_SEND_ERR)
+			printk(KERN_DEBUG
+			    "%s ch%d mgr prim(%x) addr(%x) err %d\n",
+			    __func__, ch->nr, hh->prim, ch->addr, ret);
+	}
+out:
+	mutex_unlock(&st->lmutex);
+	if (skb)
+		dev_kfree_skb(skb);
+}
+
+static inline int
+send_msg_to_layer(struct mISDNstack *st, struct sk_buff *skb)
+{
+	struct mISDNhead	*hh = mISDN_HEAD_P(skb);
+	struct mISDNchannel	*ch;
+	int	lm;
+
+	lm = hh->prim & MISDN_LAYERMASK;
+	if (*debug & DEBUG_QUEUE_FUNC)
+		printk(KERN_DEBUG "%s prim(%x) id(%x) %p\n",
+		    __func__, hh->prim, hh->id, skb);
+	if (lm == 0x1) {
+		if (!hlist_empty(&st->l1sock.head)) {
+			__net_timestamp(skb);
+			send_socklist(&st->l1sock, skb);
+		}
+		return st->layer1->send(st->layer1, skb);
+	} else if (lm == 0x2) {
+		if (!hlist_empty(&st->l1sock.head))
+			send_socklist(&st->l1sock, skb);
+		send_layer2(st, skb);
+		return 0;
+	} else if (lm == 0x4) {
+		ch = get_channel4id(st, hh->id);
+		if (ch)
+			return ch->send(ch, skb);
+		else
+			printk(KERN_WARNING
+			    "%s: dev(%s) prim(%x) id(%x) no channel\n",
+			    __func__, st->dev->name, hh->prim, hh->id);
+	} else if (lm == 0x8) {
+		WARN_ON(lm == 0x8);
+		ch = get_channel4id(st, hh->id);
+		if (ch)
+			return ch->send(ch, skb);
+		else
+			printk(KERN_WARNING
+			    "%s: dev(%s) prim(%x) id(%x) no channel\n",
+			    __func__, st->dev->name, hh->prim, hh->id);
+	} else {
+		/* broadcast not handled yet */
+		printk(KERN_WARNING "%s: dev(%s) prim %x not delivered\n",
+		    __func__, st->dev->name, hh->prim);
+	}
+	return -ESRCH;
+}
+
+static void
+do_clear_stack(struct mISDNstack *st)
+{
+}
+
+static int
+mISDNStackd(void *data)
+{
+	struct mISDNstack *st = data;
+	int err = 0;
+
+#ifdef CONFIG_SMP
+	lock_kernel();
+#endif
+	sigfillset(&current->blocked);
+#ifdef CONFIG_SMP
+	unlock_kernel();
+#endif
+	if (*debug & DEBUG_MSG_THREAD)
+		printk(KERN_DEBUG "mISDNStackd %s started\n", st->dev->name);
+
+	if (st->notify != NULL) {
+		complete(st->notify);
+		st->notify = NULL;
+	}
+
+	for (;;) {
+		struct sk_buff	*skb;
+
+		if (unlikely(test_bit(mISDN_STACK_STOPPED, &st->status))) {
+			test_and_clear_bit(mISDN_STACK_WORK, &st->status);
+			test_and_clear_bit(mISDN_STACK_RUNNING, &st->status);
+		} else
+			test_and_set_bit(mISDN_STACK_RUNNING, &st->status);
+		while (test_bit(mISDN_STACK_WORK, &st->status)) {
+			skb = skb_dequeue(&st->msgq);
+			if (!skb) {
+				test_and_clear_bit(mISDN_STACK_WORK,
+					&st->status);
+				/* test if a race happens */
+				skb = skb_dequeue(&st->msgq);
+				if (!skb)
+					continue;
+				test_and_set_bit(mISDN_STACK_WORK,
+				    &st->status);
+			}
+#ifdef MISDN_MSG_STATS
+			st->msg_cnt++;
+#endif
+			err = send_msg_to_layer(st, skb);
+			if (unlikely(err)) {
+				if (*debug & DEBUG_SEND_ERR)
+					printk(KERN_DEBUG
+					    "%s: %s prim(%x) id(%x) "
+					    "send call(%d)\n",
+					    __func__, st->dev->name,
+					    mISDN_HEAD_PRIM(skb),
+					    mISDN_HEAD_ID(skb), err);
+				dev_kfree_skb(skb);
+				continue;
+			}
+			if (unlikely(test_bit(mISDN_STACK_STOPPED,
+			    &st->status))) {
+				test_and_clear_bit(mISDN_STACK_WORK,
+				    &st->status);
+				test_and_clear_bit(mISDN_STACK_RUNNING,
+				    &st->status);
+				break;
+			}
+		}
+		if (test_bit(mISDN_STACK_CLEARING, &st->status)) {
+			test_and_set_bit(mISDN_STACK_STOPPED, &st->status);
+			test_and_clear_bit(mISDN_STACK_RUNNING, &st->status);
+			do_clear_stack(st);
+			test_and_clear_bit(mISDN_STACK_CLEARING, &st->status);
+			test_and_set_bit(mISDN_STACK_RESTART, &st->status);
+		}
+		if (test_and_clear_bit(mISDN_STACK_RESTART, &st->status)) {
+			test_and_clear_bit(mISDN_STACK_STOPPED, &st->status);
+			test_and_set_bit(mISDN_STACK_RUNNING, &st->status);
+			if (!skb_queue_empty(&st->msgq))
+				test_and_set_bit(mISDN_STACK_WORK,
+				    &st->status);
+		}
+		if (test_bit(mISDN_STACK_ABORT, &st->status))
+			break;
+		if (st->notify != NULL) {
+			complete(st->notify);
+			st->notify = NULL;
+		}
+#ifdef MISDN_MSG_STATS
+		st->sleep_cnt++;
+#endif
+		test_and_clear_bit(mISDN_STACK_ACTIVE, &st->status);
+		wait_event_interruptible(st->workq, (st->status &
+		    mISDN_STACK_ACTION_MASK));
+		if (*debug & DEBUG_MSG_THREAD)
+			printk(KERN_DEBUG "%s: %s wake status %08lx\n",
+			    __func__, st->dev->name, st->status);
+		test_and_set_bit(mISDN_STACK_ACTIVE, &st->status);
+
+		test_and_clear_bit(mISDN_STACK_WAKEUP, &st->status);
+
+		if (test_bit(mISDN_STACK_STOPPED, &st->status)) {
+			test_and_clear_bit(mISDN_STACK_RUNNING, &st->status);
+#ifdef MISDN_MSG_STATS
+			st->stopped_cnt++;
+#endif
+		}
+	}
+#ifdef MISDN_MSG_STATS
+	printk(KERN_DEBUG "mISDNStackd daemon for %s proceed %d "
+	    "msg %d sleep %d stopped\n",
+	    st->dev->name, st->msg_cnt, st->sleep_cnt, st->stopped_cnt);
+	printk(KERN_DEBUG
+	    "mISDNStackd daemon for %s utime(%ld) stime(%ld)\n",
+	    st->dev->name, st->thread->utime, st->thread->stime);
+	printk(KERN_DEBUG
+	    "mISDNStackd daemon for %s nvcsw(%ld) nivcsw(%ld)\n",
+	    st->dev->name, st->thread->nvcsw, st->thread->nivcsw);
+	printk(KERN_DEBUG "mISDNStackd daemon for %s killed now\n",
+	    st->dev->name);
+#endif
+	test_and_set_bit(mISDN_STACK_KILLED, &st->status);
+	test_and_clear_bit(mISDN_STACK_RUNNING, &st->status);
+	test_and_clear_bit(mISDN_STACK_ACTIVE, &st->status);
+	test_and_clear_bit(mISDN_STACK_ABORT, &st->status);
+	skb_queue_purge(&st->msgq);
+	st->thread = NULL;
+	if (st->notify != NULL) {
+		complete(st->notify);
+		st->notify = NULL;
+	}
+	return 0;
+}
+
+static int
+l1_receive(struct mISDNchannel *ch, struct sk_buff *skb)
+{
+	if (!ch->st)
+		return -ENODEV;
+	__net_timestamp(skb);
+	_queue_message(ch->st, skb);
+	return 0;
+}
+
+void
+set_channel_address(struct mISDNchannel *ch, u_int sapi, u_int tei)
+{
+	ch->addr = sapi | (tei << 8);
+}
+
+void
+__add_layer2(struct mISDNchannel *ch, struct mISDNstack *st)
+{
+	list_add_tail(&ch->list, &st->layer2);
+}
+
+void
+add_layer2(struct mISDNchannel *ch, struct mISDNstack *st)
+{
+	mutex_lock(&st->lmutex);
+	__add_layer2(ch, st);
+	mutex_unlock(&st->lmutex);
+}
+
+static int
+st_own_ctrl(struct mISDNchannel *ch, u_int cmd, void *arg)
+{
+	if (!ch->st || ch->st->layer1)
+		return -EINVAL;
+	return ch->st->layer1->ctrl(ch->st->layer1, cmd, arg);
+}
+
+int
+create_stack(struct mISDNdevice *dev)
+{
+	struct mISDNstack	*newst;
+	int			err;
+	DECLARE_COMPLETION_ONSTACK(done);
+
+	newst = kzalloc(sizeof(struct mISDNstack), GFP_KERNEL);
+	if (!newst) {
+		printk(KERN_ERR "kmalloc mISDN_stack failed\n");
+		return -ENOMEM;
+	}
+	newst->dev = dev;
+	INIT_LIST_HEAD(&newst->layer2);
+	INIT_HLIST_HEAD(&newst->l1sock.head);
+	rwlock_init(&newst->l1sock.lock);
+	init_waitqueue_head(&newst->workq);
+	skb_queue_head_init(&newst->msgq);
+	mutex_init(&newst->lmutex);
+	dev->D.st = newst;
+	err = create_teimanager(dev);
+	if (err) {
+		printk(KERN_ERR "kmalloc teimanager failed\n");
+		kfree(newst);
+		return err;
+	}
+	dev->teimgr->peer = &newst->own;
+	dev->teimgr->recv = mISDN_queue_message;
+	dev->teimgr->st = newst;
+	newst->layer1 = &dev->D;
+	dev->D.recv = l1_receive;
+	dev->D.peer = &newst->own;
+	newst->own.st = newst;
+	newst->own.ctrl = st_own_ctrl;
+	newst->own.send = mISDN_queue_message;
+	newst->own.recv = mISDN_queue_message;
+	if (*debug & DEBUG_CORE_FUNC)
+		printk(KERN_DEBUG "%s: st(%s)\n", __func__, newst->dev->name);
+	newst->notify = &done;
+	newst->thread = kthread_run(mISDNStackd, (void *)newst, "mISDN_%s",
+		newst->dev->name);
+	if (IS_ERR(newst->thread)) {
+		err = PTR_ERR(newst->thread);
+		printk(KERN_ERR
+			"mISDN:cannot create kernel thread for %s (%d)\n",
+			newst->dev->name, err);
+		delete_teimanager(dev->teimgr);
+		kfree(newst);
+	} else
+		wait_for_completion(&done);
+	return err;
+}
+
+int
+connect_layer1(struct mISDNdevice *dev, struct mISDNchannel *ch,
+		u_int protocol, struct sockaddr_mISDN *adr)
+{
+	struct mISDN_sock	*msk = container_of(ch, struct mISDN_sock, ch);
+	struct channel_req	rq;
+	int			err;
+
+
+	if (*debug &  DEBUG_CORE_FUNC)
+		printk(KERN_DEBUG "%s: %s proto(%x) adr(%d %d %d %d)\n",
+			__func__, dev->name, protocol, adr->dev, adr->channel,
+			 adr->sapi, adr->tei);
+	switch (protocol) {
+	case ISDN_P_NT_S0:
+	case ISDN_P_NT_E1:
+	case ISDN_P_TE_S0:
+	case ISDN_P_TE_E1:
+#ifdef PROTOCOL_CHECK
+		/* this should be enhanced */
+		if (!list_empty(&dev->D.st->layer2)
+			&& dev->D.protocol != protocol)
+			return -EBUSY;
+		if (!hlist_empty(&dev->D.st->l1sock.head)
+			&& dev->D.protocol != protocol)
+			return -EBUSY;
+#endif
+		ch->recv = mISDN_queue_message;
+		ch->peer = &dev->D.st->own;
+		ch->st = dev->D.st;
+		rq.protocol = protocol;
+		rq.adr.channel = 0;
+		err = dev->D.ctrl(&dev->D, OPEN_CHANNEL, &rq);
+		printk(KERN_DEBUG "%s: ret 1 %d\n", __func__, err);
+		if (err)
+			return err;
+		write_lock_bh(&dev->D.st->l1sock.lock);
+		sk_add_node(&msk->sk, &dev->D.st->l1sock.head);
+		write_unlock_bh(&dev->D.st->l1sock.lock);
+		break;
+	default:
+		return -ENOPROTOOPT;
+	}
+	return 0;
+}
+
+int
+connect_Bstack(struct mISDNdevice *dev, struct mISDNchannel *ch,
+    u_int protocol, struct sockaddr_mISDN *adr)
+{
+	struct channel_req	rq, rq2;
+	int			pmask, err;
+	struct Bprotocol	*bp;
+
+	if (*debug &  DEBUG_CORE_FUNC)
+		printk(KERN_DEBUG "%s: %s proto(%x) adr(%d %d %d %d)\n",
+			__func__, dev->name, protocol,
+			adr->dev, adr->channel, adr->sapi,
+			adr->tei);
+	ch->st = dev->D.st;
+	pmask = 1 << (protocol & ISDN_P_B_MASK);
+	if (pmask & dev->Bprotocols) {
+		rq.protocol = protocol;
+		rq.adr = *adr;
+		err = dev->D.ctrl(&dev->D, OPEN_CHANNEL, &rq);
+		if (err)
+			return err;
+		ch->recv = rq.ch->send;
+		ch->peer = rq.ch;
+		rq.ch->recv = ch->send;
+		rq.ch->peer = ch;
+		rq.ch->st = dev->D.st;
+	} else {
+		bp = get_Bprotocol4mask(pmask);
+		if (!bp)
+			return -ENOPROTOOPT;
+		rq2.protocol = protocol;
+		rq2.adr = *adr;
+		rq2.ch = ch;
+		err = bp->create(&rq2);
+		if (err)
+			return err;
+		ch->recv = rq2.ch->send;
+		ch->peer = rq2.ch;
+		rq2.ch->st = dev->D.st;
+		rq.protocol = rq2.protocol;
+		rq.adr = *adr;
+		err = dev->D.ctrl(&dev->D, OPEN_CHANNEL, &rq);
+		if (err) {
+			rq2.ch->ctrl(rq2.ch, CLOSE_CHANNEL, NULL);
+			return err;
+		}
+		rq2.ch->recv = rq.ch->send;
+		rq2.ch->peer = rq.ch;
+		rq.ch->recv = rq2.ch->send;
+		rq.ch->peer = rq2.ch;
+		rq.ch->st = dev->D.st;
+	}
+	ch->protocol = protocol;
+	ch->nr = rq.ch->nr;
+	return 0;
+}
+
+int
+create_l2entity(struct mISDNdevice *dev, struct mISDNchannel *ch,
+    u_int protocol, struct sockaddr_mISDN *adr)
+{
+	struct channel_req	rq;
+	int			err;
+
+	if (*debug &  DEBUG_CORE_FUNC)
+		printk(KERN_DEBUG "%s: %s proto(%x) adr(%d %d %d %d)\n",
+			__func__, dev->name, protocol,
+			adr->dev, adr->channel, adr->sapi,
+			adr->tei);
+	rq.protocol = ISDN_P_TE_S0;
+	if (dev->Dprotocols & (1 << ISDN_P_TE_E1))
+		rq.protocol = ISDN_P_TE_E1;
+	switch (protocol) {
+	case ISDN_P_LAPD_NT:
+		rq.protocol = ISDN_P_NT_S0;
+		if (dev->Dprotocols & (1 << ISDN_P_NT_E1))
+			rq.protocol = ISDN_P_NT_E1;
+	case ISDN_P_LAPD_TE:
+#ifdef PROTOCOL_CHECK
+		/* this should be enhanced */
+		if (!list_empty(&dev->D.st->layer2)
+			&& dev->D.protocol != protocol)
+			return -EBUSY;
+		if (!hlist_empty(&dev->D.st->l1sock.head)
+			&& dev->D.protocol != protocol)
+			return -EBUSY;
+#endif
+		ch->recv = mISDN_queue_message;
+		ch->peer = &dev->D.st->own;
+		ch->st = dev->D.st;
+		rq.adr.channel = 0;
+		err = dev->D.ctrl(&dev->D, OPEN_CHANNEL, &rq);
+		printk(KERN_DEBUG "%s: ret 1 %d\n", __func__, err);
+		if (err)
+			break;
+		rq.protocol = protocol;
+		rq.adr = *adr;
+		rq.ch = ch;
+		err = dev->teimgr->ctrl(dev->teimgr, OPEN_CHANNEL, &rq);
+		printk(KERN_DEBUG "%s: ret 2 %d\n", __func__, err);
+		if (!err) {
+			if ((protocol == ISDN_P_LAPD_NT) && !rq.ch)
+				break;
+			add_layer2(rq.ch, dev->D.st);
+			rq.ch->recv = mISDN_queue_message;
+			rq.ch->peer = &dev->D.st->own;
+			rq.ch->ctrl(rq.ch, OPEN_CHANNEL, NULL); /* can't fail */
+		}
+		break;
+	default:
+		err = -EPROTONOSUPPORT;
+	}
+	return err;
+}
+
+void
+delete_channel(struct mISDNchannel *ch)
+{
+	struct mISDN_sock	*msk = container_of(ch, struct mISDN_sock, ch);
+	struct mISDNchannel	*pch;
+
+	if (!ch->st) {
+		printk(KERN_WARNING "%s: no stack\n", __func__);
+		return;
+	}
+	if (*debug & DEBUG_CORE_FUNC)
+		printk(KERN_DEBUG "%s: st(%s) protocol(%x)\n", __func__,
+		    ch->st->dev->name, ch->protocol);
+	if (ch->protocol >= ISDN_P_B_START) {
+		if (ch->peer) {
+			ch->peer->ctrl(ch->peer, CLOSE_CHANNEL, NULL);
+			ch->peer = NULL;
+		}
+		return;
+	}
+	switch (ch->protocol) {
+	case ISDN_P_NT_S0:
+	case ISDN_P_TE_S0:
+	case ISDN_P_NT_E1:
+	case ISDN_P_TE_E1:
+		write_lock_bh(&ch->st->l1sock.lock);
+		sk_del_node_init(&msk->sk);
+		write_unlock_bh(&ch->st->l1sock.lock);
+		ch->st->dev->D.ctrl(&ch->st->dev->D, CLOSE_CHANNEL, NULL);
+		break;
+	case ISDN_P_LAPD_TE:
+		pch = get_channel4id(ch->st, ch->nr);
+		if (pch) {
+			mutex_lock(&ch->st->lmutex);
+			list_del(&pch->list);
+			mutex_unlock(&ch->st->lmutex);
+			pch->ctrl(pch, CLOSE_CHANNEL, NULL);
+			pch = ch->st->dev->teimgr;
+			pch->ctrl(pch, CLOSE_CHANNEL, NULL);
+		} else
+			printk(KERN_WARNING "%s: no l2 channel\n",
+			    __func__);
+		break;
+	case ISDN_P_LAPD_NT:
+		pch = ch->st->dev->teimgr;
+		if (pch) {
+			pch->ctrl(pch, CLOSE_CHANNEL, NULL);
+		} else
+			printk(KERN_WARNING "%s: no l2 channel\n",
+			    __func__);
+		break;
+	default:
+		break;
+	}
+	return;
+}
+
+void
+delete_stack(struct mISDNdevice *dev)
+{
+	struct mISDNstack	*st = dev->D.st;
+	DECLARE_COMPLETION_ONSTACK(done);
+
+	if (*debug & DEBUG_CORE_FUNC)
+		printk(KERN_DEBUG "%s: st(%s)\n", __func__,
+		    st->dev->name);
+	if (dev->teimgr)
+		delete_teimanager(dev->teimgr);
+	if (st->thread) {
+		if (st->notify) {
+			printk(KERN_WARNING "%s: notifier in use\n",
+			    __func__);
+				complete(st->notify);
+		}
+		st->notify = &done;
+		test_and_set_bit(mISDN_STACK_ABORT, &st->status);
+		test_and_set_bit(mISDN_STACK_WAKEUP, &st->status);
+		wake_up_interruptible(&st->workq);
+		wait_for_completion(&done);
+	}
+	if (!list_empty(&st->layer2))
+		printk(KERN_WARNING "%s: layer2 list not empty\n",
+		    __func__);
+	if (!hlist_empty(&st->l1sock.head))
+		printk(KERN_WARNING "%s: layer1 list not empty\n",
+		    __func__);
+	kfree(st);
+}
+
+void
+mISDN_initstack(u_int *dp)
+{
+	debug = dp;
+}
diff --git a/drivers/isdn/mISDN/tei.c b/drivers/isdn/mISDN/tei.c
new file mode 100644
index 000000000000..6fbae42127bf
--- /dev/null
+++ b/drivers/isdn/mISDN/tei.c
@@ -0,0 +1,1340 @@
+/*
+ *
+ * Author	Karsten Keil <kkeil@novell.com>
+ *
+ * Copyright 2008  by Karsten Keil <kkeil@novell.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+#include "layer2.h"
+#include <linux/random.h>
+#include "core.h"
+
+#define ID_REQUEST	1
+#define ID_ASSIGNED	2
+#define ID_DENIED	3
+#define ID_CHK_REQ	4
+#define ID_CHK_RES	5
+#define ID_REMOVE	6
+#define ID_VERIFY	7
+
+#define TEI_ENTITY_ID	0xf
+
+#define MGR_PH_ACTIVE	16
+#define MGR_PH_NOTREADY	17
+
+#define DATIMER_VAL	10000
+
+static 	u_int	*debug;
+
+static struct Fsm deactfsm = {NULL, 0, 0, NULL, NULL};
+static struct Fsm teifsmu = {NULL, 0, 0, NULL, NULL};
+static struct Fsm teifsmn = {NULL, 0, 0, NULL, NULL};
+
+enum {
+	ST_L1_DEACT,
+	ST_L1_DEACT_PENDING,
+	ST_L1_ACTIV,
+};
+#define DEACT_STATE_COUNT (ST_L1_ACTIV+1)
+
+static char *strDeactState[] =
+{
+	"ST_L1_DEACT",
+	"ST_L1_DEACT_PENDING",
+	"ST_L1_ACTIV",
+};
+
+enum {
+	EV_ACTIVATE,
+	EV_ACTIVATE_IND,
+	EV_DEACTIVATE,
+	EV_DEACTIVATE_IND,
+	EV_UI,
+	EV_DATIMER,
+};
+
+#define DEACT_EVENT_COUNT (EV_DATIMER+1)
+
+static char *strDeactEvent[] =
+{
+	"EV_ACTIVATE",
+	"EV_ACTIVATE_IND",
+	"EV_DEACTIVATE",
+	"EV_DEACTIVATE_IND",
+	"EV_UI",
+	"EV_DATIMER",
+};
+
+static void
+da_debug(struct FsmInst *fi, char *fmt, ...)
+{
+	struct manager	*mgr = fi->userdata;
+	va_list va;
+
+	if (!(*debug & DEBUG_L2_TEIFSM))
+		return;
+	va_start(va, fmt);
+	printk(KERN_DEBUG "mgr(%d): ", mgr->ch.st->dev->id);
+	vprintk(fmt, va);
+	printk("\n");
+	va_end(va);
+}
+
+static void
+da_activate(struct FsmInst *fi, int event, void *arg)
+{
+	struct manager	*mgr = fi->userdata;
+
+	if (fi->state == ST_L1_DEACT_PENDING)
+		mISDN_FsmDelTimer(&mgr->datimer, 1);
+	mISDN_FsmChangeState(fi, ST_L1_ACTIV);
+}
+
+static void
+da_deactivate_ind(struct FsmInst *fi, int event, void *arg)
+{
+	mISDN_FsmChangeState(fi, ST_L1_DEACT);
+}
+
+static void
+da_deactivate(struct FsmInst *fi, int event, void *arg)
+{
+	struct manager	*mgr = fi->userdata;
+	struct layer2	*l2;
+	u_long		flags;
+
+	read_lock_irqsave(&mgr->lock, flags);
+	list_for_each_entry(l2, &mgr->layer2, list) {
+		if (l2->l2m.state > ST_L2_4) {
+			/* have still activ TEI */
+			read_unlock_irqrestore(&mgr->lock, flags);
+			return;
+		}
+	}
+	read_unlock_irqrestore(&mgr->lock, flags);
+	/* All TEI are inactiv */
+	mISDN_FsmAddTimer(&mgr->datimer, DATIMER_VAL, EV_DATIMER, NULL, 1);
+	mISDN_FsmChangeState(fi, ST_L1_DEACT_PENDING);
+}
+
+static void
+da_ui(struct FsmInst *fi, int event, void *arg)
+{
+	struct manager	*mgr = fi->userdata;
+
+	/* restart da timer */
+	mISDN_FsmDelTimer(&mgr->datimer, 2);
+	mISDN_FsmAddTimer(&mgr->datimer, DATIMER_VAL, EV_DATIMER, NULL, 2);
+
+}
+
+static void
+da_timer(struct FsmInst *fi, int event, void *arg)
+{
+	struct manager	*mgr = fi->userdata;
+	struct layer2	*l2;
+	u_long		flags;
+
+	/* check again */
+	read_lock_irqsave(&mgr->lock, flags);
+	list_for_each_entry(l2, &mgr->layer2, list) {
+		if (l2->l2m.state > ST_L2_4) {
+			/* have still activ TEI */
+			read_unlock_irqrestore(&mgr->lock, flags);
+			mISDN_FsmChangeState(fi, ST_L1_ACTIV);
+			return;
+		}
+	}
+	read_unlock_irqrestore(&mgr->lock, flags);
+	/* All TEI are inactiv */
+	mISDN_FsmChangeState(fi, ST_L1_DEACT);
+	_queue_data(&mgr->ch, PH_DEACTIVATE_REQ, MISDN_ID_ANY, 0, NULL,
+	    GFP_ATOMIC);
+}
+
+static struct FsmNode DeactFnList[] =
+{
+	{ST_L1_DEACT, EV_ACTIVATE_IND, da_activate},
+	{ST_L1_ACTIV, EV_DEACTIVATE_IND, da_deactivate_ind},
+	{ST_L1_ACTIV, EV_DEACTIVATE, da_deactivate},
+	{ST_L1_DEACT_PENDING, EV_ACTIVATE, da_activate},
+	{ST_L1_DEACT_PENDING, EV_UI, da_ui},
+	{ST_L1_DEACT_PENDING, EV_DATIMER, da_timer},
+};
+
+enum {
+	ST_TEI_NOP,
+	ST_TEI_IDREQ,
+	ST_TEI_IDVERIFY,
+};
+
+#define TEI_STATE_COUNT (ST_TEI_IDVERIFY+1)
+
+static char *strTeiState[] =
+{
+	"ST_TEI_NOP",
+	"ST_TEI_IDREQ",
+	"ST_TEI_IDVERIFY",
+};
+
+enum {
+	EV_IDREQ,
+	EV_ASSIGN,
+	EV_ASSIGN_REQ,
+	EV_DENIED,
+	EV_CHKREQ,
+	EV_CHKRESP,
+	EV_REMOVE,
+	EV_VERIFY,
+	EV_TIMER,
+};
+
+#define TEI_EVENT_COUNT (EV_TIMER+1)
+
+static char *strTeiEvent[] =
+{
+	"EV_IDREQ",
+	"EV_ASSIGN",
+	"EV_ASSIGN_REQ",
+	"EV_DENIED",
+	"EV_CHKREQ",
+	"EV_CHKRESP",
+	"EV_REMOVE",
+	"EV_VERIFY",
+	"EV_TIMER",
+};
+
+static void
+tei_debug(struct FsmInst *fi, char *fmt, ...)
+{
+	struct teimgr	*tm = fi->userdata;
+	va_list va;
+
+	if (!(*debug & DEBUG_L2_TEIFSM))
+		return;
+	va_start(va, fmt);
+	printk(KERN_DEBUG "tei(%d): ", tm->l2->tei);
+	vprintk(fmt, va);
+	printk("\n");
+	va_end(va);
+}
+
+
+
+static int
+get_free_id(struct manager *mgr)
+{
+	u64		ids = 0;
+	int		i;
+	struct layer2	*l2;
+
+	list_for_each_entry(l2, &mgr->layer2, list) {
+		if (l2->ch.nr > 63) {
+			printk(KERN_WARNING
+			    "%s: more as 63 layer2 for one device\n",
+			    __func__);
+			return -EBUSY;
+		}
+		test_and_set_bit(l2->ch.nr, (u_long *)&ids);
+	}
+	for (i = 1; i < 64; i++)
+		if (!test_bit(i, (u_long *)&ids))
+			return i;
+	printk(KERN_WARNING "%s: more as 63 layer2 for one device\n",
+	    __func__);
+	return -EBUSY;
+}
+
+static int
+get_free_tei(struct manager *mgr)
+{
+	u64		ids = 0;
+	int		i;
+	struct layer2	*l2;
+
+	list_for_each_entry(l2, &mgr->layer2, list) {
+		if (l2->ch.nr == 0)
+			continue;
+		if ((l2->ch.addr & 0xff) != 0)
+			continue;
+		i = l2->ch.addr >> 8;
+		if (i < 64)
+			continue;
+		i -= 64;
+
+		test_and_set_bit(i, (u_long *)&ids);
+	}
+	for (i = 0; i < 64; i++)
+		if (!test_bit(i, (u_long *)&ids))
+			return i + 64;
+	printk(KERN_WARNING "%s: more as 63 dynamic tei for one device\n",
+	    __func__);
+	return -1;
+}
+
+static void
+teiup_create(struct manager *mgr, u_int prim, int len, void *arg)
+{
+	struct sk_buff	*skb;
+	struct mISDNhead *hh;
+	int		err;
+
+	skb = mI_alloc_skb(len, GFP_ATOMIC);
+	if (!skb)
+		return;
+	hh = mISDN_HEAD_P(skb);
+	hh->prim = prim;
+	hh->id = (mgr->ch.nr << 16) | mgr->ch.addr;
+	if (len)
+		memcpy(skb_put(skb, len), arg, len);
+	err = mgr->up->send(mgr->up, skb);
+	if (err) {
+		printk(KERN_WARNING "%s: err=%d\n", __func__, err);
+		dev_kfree_skb(skb);
+	}
+}
+
+static u_int
+new_id(struct manager *mgr)
+{
+	u_int	id;
+
+	id = mgr->nextid++;
+	if (id == 0x7fff)
+		mgr->nextid = 1;
+	id <<= 16;
+	id |= GROUP_TEI << 8;
+	id |= TEI_SAPI;
+	return id;
+}
+
+static void
+do_send(struct manager *mgr)
+{
+	if (!test_bit(MGR_PH_ACTIVE, &mgr->options))
+		return;
+
+	if (!test_and_set_bit(MGR_PH_NOTREADY, &mgr->options)) {
+		struct sk_buff	*skb = skb_dequeue(&mgr->sendq);
+
+		if (!skb) {
+			test_and_clear_bit(MGR_PH_NOTREADY, &mgr->options);
+			return;
+		}
+		mgr->lastid = mISDN_HEAD_ID(skb);
+		mISDN_FsmEvent(&mgr->deact, EV_UI, NULL);
+		if (mgr->ch.recv(mgr->ch.peer, skb)) {
+			dev_kfree_skb(skb);
+			test_and_clear_bit(MGR_PH_NOTREADY, &mgr->options);
+			mgr->lastid = MISDN_ID_NONE;
+		}
+	}
+}
+
+static void
+do_ack(struct manager *mgr, u_int id)
+{
+	if (test_bit(MGR_PH_NOTREADY, &mgr->options)) {
+		if (id == mgr->lastid) {
+			if (test_bit(MGR_PH_ACTIVE, &mgr->options)) {
+				struct sk_buff	*skb;
+
+				skb = skb_dequeue(&mgr->sendq);
+				if (skb) {
+					mgr->lastid = mISDN_HEAD_ID(skb);
+					if (!mgr->ch.recv(mgr->ch.peer, skb))
+						return;
+					dev_kfree_skb(skb);
+				}
+			}
+			mgr->lastid = MISDN_ID_NONE;
+			test_and_clear_bit(MGR_PH_NOTREADY, &mgr->options);
+		}
+	}
+}
+
+static void
+mgr_send_down(struct manager *mgr, struct sk_buff *skb)
+{
+	skb_queue_tail(&mgr->sendq, skb);
+	if (!test_bit(MGR_PH_ACTIVE, &mgr->options)) {
+		_queue_data(&mgr->ch, PH_ACTIVATE_REQ, MISDN_ID_ANY, 0,
+		    NULL, GFP_KERNEL);
+	} else {
+		do_send(mgr);
+	}
+}
+
+static int
+dl_unit_data(struct manager *mgr, struct sk_buff *skb)
+{
+	if (!test_bit(MGR_OPT_NETWORK, &mgr->options)) /* only net send UI */
+		return -EINVAL;
+	if (!test_bit(MGR_PH_ACTIVE, &mgr->options))
+		_queue_data(&mgr->ch, PH_ACTIVATE_REQ, MISDN_ID_ANY, 0,
+		    NULL, GFP_KERNEL);
+	skb_push(skb, 3);
+	skb->data[0] = 0x02; /* SAPI 0 C/R = 1 */
+	skb->data[1] = 0xff; /* TEI 127 */
+	skb->data[2] = UI;   /* UI frame */
+	mISDN_HEAD_PRIM(skb) = PH_DATA_REQ;
+	mISDN_HEAD_ID(skb) = new_id(mgr);
+	skb_queue_tail(&mgr->sendq, skb);
+	do_send(mgr);
+	return 0;
+}
+
+unsigned int
+random_ri(void)
+{
+	u16 x;
+
+	get_random_bytes(&x, sizeof(x));
+	return x;
+}
+
+static struct layer2 *
+findtei(struct manager *mgr, int tei)
+{
+	struct layer2	*l2;
+	u_long		flags;
+
+	read_lock_irqsave(&mgr->lock, flags);
+	list_for_each_entry(l2, &mgr->layer2, list) {
+		if ((l2->sapi == 0) && (l2->tei > 0) &&
+		    (l2->tei != GROUP_TEI) && (l2->tei == tei))
+			goto done;
+	}
+	l2 = NULL;
+done:
+	read_unlock_irqrestore(&mgr->lock, flags);
+	return l2;
+}
+
+static void
+put_tei_msg(struct manager *mgr, u_char m_id, unsigned int ri, u_char tei)
+{
+	struct sk_buff *skb;
+	u_char bp[8];
+
+	bp[0] = (TEI_SAPI << 2);
+	if (test_bit(MGR_OPT_NETWORK, &mgr->options))
+		bp[0] |= 2; /* CR:=1 for net command */
+	bp[1] = (GROUP_TEI << 1) | 0x1;
+	bp[2] = UI;
+	bp[3] = TEI_ENTITY_ID;
+	bp[4] = ri >> 8;
+	bp[5] = ri & 0xff;
+	bp[6] = m_id;
+	bp[7] = (tei << 1) | 1;
+	skb = _alloc_mISDN_skb(PH_DATA_REQ, new_id(mgr),
+	    8, bp, GFP_ATOMIC);
+	if (!skb) {
+		printk(KERN_WARNING "%s: no skb for tei msg\n", __func__);
+		return;
+	}
+	mgr_send_down(mgr, skb);
+}
+
+static void
+tei_id_request(struct FsmInst *fi, int event, void *arg)
+{
+	struct teimgr *tm = fi->userdata;
+
+	if (tm->l2->tei != GROUP_TEI) {
+		tm->tei_m.printdebug(&tm->tei_m,
+			"assign request for allready assigned tei %d",
+			tm->l2->tei);
+		return;
+	}
+	tm->ri = random_ri();
+	if (*debug & DEBUG_L2_TEI)
+		tm->tei_m.printdebug(&tm->tei_m,
+			"assign request ri %d", tm->ri);
+	put_tei_msg(tm->mgr, ID_REQUEST, tm->ri, GROUP_TEI);
+	mISDN_FsmChangeState(fi, ST_TEI_IDREQ);
+	mISDN_FsmAddTimer(&tm->timer, tm->tval, EV_TIMER, NULL, 1);
+	tm->nval = 3;
+}
+
+static void
+tei_id_assign(struct FsmInst *fi, int event, void *arg)
+{
+	struct teimgr	*tm = fi->userdata;
+	struct layer2	*l2;
+	u_char *dp = arg;
+	int ri, tei;
+
+	ri = ((unsigned int) *dp++ << 8);
+	ri += *dp++;
+	dp++;
+	tei = *dp >> 1;
+	if (*debug & DEBUG_L2_TEI)
+		tm->tei_m.printdebug(fi, "identity assign ri %d tei %d",
+			ri, tei);
+	l2 = findtei(tm->mgr, tei);
+	if (l2) {	/* same tei is in use */
+		if (ri != l2->tm->ri) {
+			tm->tei_m.printdebug(fi,
+				"possible duplicate assignment tei %d", tei);
+			tei_l2(l2, MDL_ERROR_RSP, 0);
+		}
+	} else if (ri == tm->ri) {
+		mISDN_FsmDelTimer(&tm->timer, 1);
+		mISDN_FsmChangeState(fi, ST_TEI_NOP);
+		tei_l2(tm->l2, MDL_ASSIGN_REQ, tei);
+	}
+}
+
+static void
+tei_id_test_dup(struct FsmInst *fi, int event, void *arg)
+{
+	struct teimgr	*tm = fi->userdata;
+	struct layer2	*l2;
+	u_char *dp = arg;
+	int tei, ri;
+
+	ri = ((unsigned int) *dp++ << 8);
+	ri += *dp++;
+	dp++;
+	tei = *dp >> 1;
+	if (*debug & DEBUG_L2_TEI)
+		tm->tei_m.printdebug(fi, "foreign identity assign ri %d tei %d",
+			ri, tei);
+	l2 = findtei(tm->mgr, tei);
+	if (l2) {	/* same tei is in use */
+		if (ri != l2->tm->ri) {	/* and it wasn't our request */
+			tm->tei_m.printdebug(fi,
+				"possible duplicate assignment tei %d", tei);
+			mISDN_FsmEvent(&l2->tm->tei_m, EV_VERIFY, NULL);
+		}
+	}
+}
+
+static void
+tei_id_denied(struct FsmInst *fi, int event, void *arg)
+{
+	struct teimgr *tm = fi->userdata;
+	u_char *dp = arg;
+	int ri, tei;
+
+	ri = ((unsigned int) *dp++ << 8);
+	ri += *dp++;
+	dp++;
+	tei = *dp >> 1;
+	if (*debug & DEBUG_L2_TEI)
+		tm->tei_m.printdebug(fi, "identity denied ri %d tei %d",
+			ri, tei);
+}
+
+static void
+tei_id_chk_req(struct FsmInst *fi, int event, void *arg)
+{
+	struct teimgr *tm = fi->userdata;
+	u_char *dp = arg;
+	int tei;
+
+	tei = *(dp+3) >> 1;
+	if (*debug & DEBUG_L2_TEI)
+		tm->tei_m.printdebug(fi, "identity check req tei %d", tei);
+	if ((tm->l2->tei != GROUP_TEI) && ((tei == GROUP_TEI) ||
+	    (tei == tm->l2->tei))) {
+		mISDN_FsmDelTimer(&tm->timer, 4);
+		mISDN_FsmChangeState(&tm->tei_m, ST_TEI_NOP);
+		put_tei_msg(tm->mgr, ID_CHK_RES, random_ri(), tm->l2->tei);
+	}
+}
+
+static void
+tei_id_remove(struct FsmInst *fi, int event, void *arg)
+{
+	struct teimgr *tm = fi->userdata;
+	u_char *dp = arg;
+	int tei;
+
+	tei = *(dp+3) >> 1;
+	if (*debug & DEBUG_L2_TEI)
+		tm->tei_m.printdebug(fi, "identity remove tei %d", tei);
+	if ((tm->l2->tei != GROUP_TEI) &&
+	    ((tei == GROUP_TEI) || (tei == tm->l2->tei))) {
+		mISDN_FsmDelTimer(&tm->timer, 5);
+		mISDN_FsmChangeState(&tm->tei_m, ST_TEI_NOP);
+		tei_l2(tm->l2, MDL_REMOVE_REQ, 0);
+	}
+}
+
+static void
+tei_id_verify(struct FsmInst *fi, int event, void *arg)
+{
+	struct teimgr *tm = fi->userdata;
+
+	if (*debug & DEBUG_L2_TEI)
+		tm->tei_m.printdebug(fi, "id verify request for tei %d",
+			tm->l2->tei);
+	put_tei_msg(tm->mgr, ID_VERIFY, 0, tm->l2->tei);
+	mISDN_FsmChangeState(&tm->tei_m, ST_TEI_IDVERIFY);
+	mISDN_FsmAddTimer(&tm->timer, tm->tval, EV_TIMER, NULL, 2);
+	tm->nval = 2;
+}
+
+static void
+tei_id_req_tout(struct FsmInst *fi, int event, void *arg)
+{
+	struct teimgr *tm = fi->userdata;
+
+	if (--tm->nval) {
+		tm->ri = random_ri();
+		if (*debug & DEBUG_L2_TEI)
+			tm->tei_m.printdebug(fi, "assign req(%d) ri %d",
+				4 - tm->nval, tm->ri);
+		put_tei_msg(tm->mgr, ID_REQUEST, tm->ri, GROUP_TEI);
+		mISDN_FsmAddTimer(&tm->timer, tm->tval, EV_TIMER, NULL, 3);
+	} else {
+		tm->tei_m.printdebug(fi, "assign req failed");
+		tei_l2(tm->l2, MDL_ERROR_RSP, 0);
+		mISDN_FsmChangeState(fi, ST_TEI_NOP);
+	}
+}
+
+static void
+tei_id_ver_tout(struct FsmInst *fi, int event, void *arg)
+{
+	struct teimgr *tm = fi->userdata;
+
+	if (--tm->nval) {
+		if (*debug & DEBUG_L2_TEI)
+			tm->tei_m.printdebug(fi,
+				"id verify req(%d) for tei %d",
+				3 - tm->nval, tm->l2->tei);
+		put_tei_msg(tm->mgr, ID_VERIFY, 0, tm->l2->tei);
+		mISDN_FsmAddTimer(&tm->timer, tm->tval, EV_TIMER, NULL, 4);
+	} else {
+		tm->tei_m.printdebug(fi, "verify req for tei %d failed",
+			tm->l2->tei);
+		tei_l2(tm->l2, MDL_REMOVE_REQ, 0);
+		mISDN_FsmChangeState(fi, ST_TEI_NOP);
+	}
+}
+
+static struct FsmNode TeiFnListUser[] =
+{
+	{ST_TEI_NOP, EV_IDREQ, tei_id_request},
+	{ST_TEI_NOP, EV_ASSIGN, tei_id_test_dup},
+	{ST_TEI_NOP, EV_VERIFY, tei_id_verify},
+	{ST_TEI_NOP, EV_REMOVE, tei_id_remove},
+	{ST_TEI_NOP, EV_CHKREQ, tei_id_chk_req},
+	{ST_TEI_IDREQ, EV_TIMER, tei_id_req_tout},
+	{ST_TEI_IDREQ, EV_ASSIGN, tei_id_assign},
+	{ST_TEI_IDREQ, EV_DENIED, tei_id_denied},
+	{ST_TEI_IDVERIFY, EV_TIMER, tei_id_ver_tout},
+	{ST_TEI_IDVERIFY, EV_REMOVE, tei_id_remove},
+	{ST_TEI_IDVERIFY, EV_CHKREQ, tei_id_chk_req},
+};
+
+static void
+tei_l2remove(struct layer2 *l2)
+{
+	put_tei_msg(l2->tm->mgr, ID_REMOVE, 0, l2->tei);
+	tei_l2(l2, MDL_REMOVE_REQ, 0);
+	list_del(&l2->ch.list);
+	l2->ch.ctrl(&l2->ch, CLOSE_CHANNEL, NULL);
+}
+
+static void
+tei_assign_req(struct FsmInst *fi, int event, void *arg)
+{
+	struct teimgr *tm = fi->userdata;
+	u_char *dp = arg;
+
+	if (tm->l2->tei == GROUP_TEI) {
+		tm->tei_m.printdebug(&tm->tei_m,
+			"net tei assign request without tei");
+		return;
+	}
+	tm->ri = ((unsigned int) *dp++ << 8);
+	tm->ri += *dp++;
+	if (*debug & DEBUG_L2_TEI)
+		tm->tei_m.printdebug(&tm->tei_m,
+			"net assign request ri %d teim %d", tm->ri, *dp);
+	put_tei_msg(tm->mgr, ID_ASSIGNED, tm->ri, tm->l2->tei);
+	mISDN_FsmChangeState(fi, ST_TEI_NOP);
+}
+
+static void
+tei_id_chk_req_net(struct FsmInst *fi, int event, void *arg)
+{
+	struct teimgr	*tm = fi->userdata;
+
+	if (*debug & DEBUG_L2_TEI)
+		tm->tei_m.printdebug(fi, "id check request for tei %d",
+		    tm->l2->tei);
+	tm->rcnt = 0;
+	put_tei_msg(tm->mgr, ID_CHK_REQ, 0, tm->l2->tei);
+	mISDN_FsmChangeState(&tm->tei_m, ST_TEI_IDVERIFY);
+	mISDN_FsmAddTimer(&tm->timer, tm->tval, EV_TIMER, NULL, 2);
+	tm->nval = 2;
+}
+
+static void
+tei_id_chk_resp(struct FsmInst *fi, int event, void *arg)
+{
+	struct teimgr *tm = fi->userdata;
+	u_char *dp = arg;
+	int tei;
+
+	tei = dp[3] >> 1;
+	if (*debug & DEBUG_L2_TEI)
+		tm->tei_m.printdebug(fi, "identity check resp tei %d", tei);
+	if (tei == tm->l2->tei)
+		tm->rcnt++;
+}
+
+static void
+tei_id_verify_net(struct FsmInst *fi, int event, void *arg)
+{
+	struct teimgr *tm = fi->userdata;
+	u_char *dp = arg;
+	int tei;
+
+	tei = dp[3] >> 1;
+	if (*debug & DEBUG_L2_TEI)
+		tm->tei_m.printdebug(fi, "identity verify req tei %d/%d",
+		    tei, tm->l2->tei);
+	if (tei == tm->l2->tei)
+		tei_id_chk_req_net(fi, event, arg);
+}
+
+static void
+tei_id_ver_tout_net(struct FsmInst *fi, int event, void *arg)
+{
+	struct teimgr *tm = fi->userdata;
+
+	if (tm->rcnt == 1) {
+		if (*debug & DEBUG_L2_TEI)
+			tm->tei_m.printdebug(fi,
+			    "check req for tei %d sucessful\n", tm->l2->tei);
+		mISDN_FsmChangeState(fi, ST_TEI_NOP);
+	} else if (tm->rcnt > 1) {
+		/* duplicate assignment; remove */
+		tei_l2remove(tm->l2);
+	} else if (--tm->nval) {
+		if (*debug & DEBUG_L2_TEI)
+			tm->tei_m.printdebug(fi,
+				"id check req(%d) for tei %d",
+				3 - tm->nval, tm->l2->tei);
+		put_tei_msg(tm->mgr, ID_CHK_REQ, 0, tm->l2->tei);
+		mISDN_FsmAddTimer(&tm->timer, tm->tval, EV_TIMER, NULL, 4);
+	} else {
+		tm->tei_m.printdebug(fi, "check req for tei %d failed",
+			tm->l2->tei);
+		mISDN_FsmChangeState(fi, ST_TEI_NOP);
+		tei_l2remove(tm->l2);
+	}
+}
+
+static struct FsmNode TeiFnListNet[] =
+{
+	{ST_TEI_NOP, EV_ASSIGN_REQ, tei_assign_req},
+	{ST_TEI_NOP, EV_VERIFY, tei_id_verify_net},
+	{ST_TEI_NOP, EV_CHKREQ, tei_id_chk_req_net},
+	{ST_TEI_IDVERIFY, EV_TIMER, tei_id_ver_tout_net},
+	{ST_TEI_IDVERIFY, EV_CHKRESP, tei_id_chk_resp},
+};
+
+static void
+tei_ph_data_ind(struct teimgr *tm, u_int mt, u_char *dp, int len)
+{
+	if (test_bit(FLG_FIXED_TEI, &tm->l2->flag))
+		return;
+	if (*debug & DEBUG_L2_TEI)
+		tm->tei_m.printdebug(&tm->tei_m, "tei handler mt %x", mt);
+	if (mt == ID_ASSIGNED)
+		mISDN_FsmEvent(&tm->tei_m, EV_ASSIGN, dp);
+	else if (mt == ID_DENIED)
+		mISDN_FsmEvent(&tm->tei_m, EV_DENIED, dp);
+	else if (mt == ID_CHK_REQ)
+		mISDN_FsmEvent(&tm->tei_m, EV_CHKREQ, dp);
+	else if (mt == ID_REMOVE)
+		mISDN_FsmEvent(&tm->tei_m, EV_REMOVE, dp);
+	else if (mt == ID_VERIFY)
+		mISDN_FsmEvent(&tm->tei_m, EV_VERIFY, dp);
+	else if (mt == ID_CHK_RES)
+		mISDN_FsmEvent(&tm->tei_m, EV_CHKRESP, dp);
+}
+
+static struct layer2 *
+create_new_tei(struct manager *mgr, int tei)
+{
+	u_long		opt = 0;
+	u_long		flags;
+	int		id;
+	struct layer2	*l2;
+
+	if (!mgr->up)
+		return NULL;
+	if (tei < 64)
+		test_and_set_bit(OPTION_L2_FIXEDTEI, &opt);
+	if (mgr->ch.st->dev->Dprotocols
+	  & ((1 << ISDN_P_TE_E1) | (1 << ISDN_P_NT_E1)))
+		test_and_set_bit(OPTION_L2_PMX, &opt);
+	l2 = create_l2(mgr->up, ISDN_P_LAPD_NT, (u_int)opt, (u_long)tei);
+	if (!l2) {
+		printk(KERN_WARNING "%s:no memory for layer2\n", __func__);
+		return NULL;
+	}
+	l2->tm = kzalloc(sizeof(struct teimgr), GFP_KERNEL);
+	if (!l2->tm) {
+		kfree(l2);
+		printk(KERN_WARNING "%s:no memory for teimgr\n", __func__);
+		return NULL;
+	}
+	l2->tm->mgr = mgr;
+	l2->tm->l2 = l2;
+	l2->tm->tei_m.debug = *debug & DEBUG_L2_TEIFSM;
+	l2->tm->tei_m.userdata = l2->tm;
+	l2->tm->tei_m.printdebug = tei_debug;
+	l2->tm->tei_m.fsm = &teifsmn;
+	l2->tm->tei_m.state = ST_TEI_NOP;
+	l2->tm->tval = 2000; /* T202  2 sec */
+	mISDN_FsmInitTimer(&l2->tm->tei_m, &l2->tm->timer);
+	write_lock_irqsave(&mgr->lock, flags);
+	id = get_free_id(mgr);
+	list_add_tail(&l2->list, &mgr->layer2);
+	write_unlock_irqrestore(&mgr->lock, flags);
+	if (id < 0) {
+		l2->ch.ctrl(&l2->ch, CLOSE_CHANNEL, NULL);
+		printk(KERN_WARNING "%s:no free id\n", __func__);
+		return NULL;
+	} else {
+		l2->ch.nr = id;
+		__add_layer2(&l2->ch, mgr->ch.st);
+		l2->ch.recv = mgr->ch.recv;
+		l2->ch.peer = mgr->ch.peer;
+		l2->ch.ctrl(&l2->ch, OPEN_CHANNEL, NULL);
+	}
+	return l2;
+}
+
+static void
+new_tei_req(struct manager *mgr, u_char *dp)
+{
+	int		tei, ri;
+	struct layer2	*l2;
+
+	ri = dp[0] << 8;
+	ri += dp[1];
+	if (!mgr->up)
+		goto denied;
+	tei = get_free_tei(mgr);
+	if (tei < 0) {
+		printk(KERN_WARNING "%s:No free tei\n", __func__);
+		goto denied;
+	}
+	l2 = create_new_tei(mgr, tei);
+	if (!l2)
+		goto denied;
+	else
+		mISDN_FsmEvent(&l2->tm->tei_m, EV_ASSIGN_REQ, dp);
+	return;
+denied:
+	put_tei_msg(mgr, ID_DENIED, ri, GROUP_TEI);
+}
+
+static int
+ph_data_ind(struct manager *mgr, struct sk_buff *skb)
+{
+	int		ret = -EINVAL;
+	struct layer2	*l2;
+	u_long		flags;
+	u_char		mt;
+
+	if (skb->len < 8) {
+		if (*debug  & DEBUG_L2_TEI)
+			printk(KERN_DEBUG "%s: short mgr frame %d/8\n",
+			    __func__, skb->len);
+		goto done;
+	}
+	if (*debug  & DEBUG_L2_TEI)
+
+	if ((skb->data[0] >> 2) != TEI_SAPI) /* not for us */
+		goto done;
+	if (skb->data[0] & 1) /* EA0 formal error */
+		goto done;
+	if (!(skb->data[1] & 1)) /* EA1 formal error */
+		goto done;
+	if ((skb->data[1] >> 1) != GROUP_TEI) /* not for us */
+		goto done;
+	if ((skb->data[2] & 0xef) != UI) /* not UI */
+		goto done;
+	if (skb->data[3] != TEI_ENTITY_ID) /* not tei entity */
+		goto done;
+	mt = skb->data[6];
+	switch (mt) {
+	case ID_REQUEST:
+	case ID_CHK_RES:
+	case ID_VERIFY:
+		if (!test_bit(MGR_OPT_NETWORK, &mgr->options))
+			goto done;
+		break;
+	case ID_ASSIGNED:
+	case ID_DENIED:
+	case ID_CHK_REQ:
+	case ID_REMOVE:
+		if (test_bit(MGR_OPT_NETWORK, &mgr->options))
+			goto done;
+		break;
+	default:
+		goto done;
+	}
+	ret = 0;
+	if (mt == ID_REQUEST) {
+		new_tei_req(mgr, &skb->data[4]);
+		goto done;
+	}
+	read_lock_irqsave(&mgr->lock, flags);
+	list_for_each_entry(l2, &mgr->layer2, list) {
+		tei_ph_data_ind(l2->tm, mt, &skb->data[4], skb->len - 4);
+	}
+	read_unlock_irqrestore(&mgr->lock, flags);
+done:
+	return ret;
+}
+
+int
+l2_tei(struct layer2 *l2, u_int cmd, u_long arg)
+{
+	struct teimgr	*tm = l2->tm;
+
+	if (test_bit(FLG_FIXED_TEI, &l2->flag))
+		return 0;
+	if (*debug & DEBUG_L2_TEI)
+		printk(KERN_DEBUG "%s: cmd(%x)\n", __func__, cmd);
+	switch (cmd) {
+	case MDL_ASSIGN_IND:
+		mISDN_FsmEvent(&tm->tei_m, EV_IDREQ, NULL);
+		break;
+	case MDL_ERROR_IND:
+		if (test_bit(MGR_OPT_NETWORK, &tm->mgr->options))
+			mISDN_FsmEvent(&tm->tei_m, EV_CHKREQ, &l2->tei);
+		if (test_bit(MGR_OPT_USER, &tm->mgr->options))
+			mISDN_FsmEvent(&tm->tei_m, EV_VERIFY, NULL);
+		break;
+	case MDL_STATUS_UP_IND:
+		if (test_bit(MGR_OPT_NETWORK, &tm->mgr->options))
+			mISDN_FsmEvent(&tm->mgr->deact, EV_ACTIVATE, NULL);
+		break;
+	case MDL_STATUS_DOWN_IND:
+		if (test_bit(MGR_OPT_NETWORK, &tm->mgr->options))
+			mISDN_FsmEvent(&tm->mgr->deact, EV_DEACTIVATE, NULL);
+		break;
+	case MDL_STATUS_UI_IND:
+		if (test_bit(MGR_OPT_NETWORK, &tm->mgr->options))
+			mISDN_FsmEvent(&tm->mgr->deact, EV_UI, NULL);
+		break;
+	}
+	return 0;
+}
+
+void
+TEIrelease(struct layer2 *l2)
+{
+	struct teimgr	*tm = l2->tm;
+	u_long		flags;
+
+	mISDN_FsmDelTimer(&tm->timer, 1);
+	write_lock_irqsave(&tm->mgr->lock, flags);
+	list_del(&l2->list);
+	write_unlock_irqrestore(&tm->mgr->lock, flags);
+	l2->tm = NULL;
+	kfree(tm);
+}
+
+static int
+create_teimgr(struct manager *mgr, struct channel_req *crq)
+{
+	struct layer2	*l2;
+	u_long 		opt = 0;
+	u_long		flags;
+	int		id;
+
+	if (*debug & DEBUG_L2_TEI)
+		printk(KERN_DEBUG "%s: %s proto(%x) adr(%d %d %d %d)\n",
+			__func__, mgr->ch.st->dev->name, crq->protocol,
+			crq->adr.dev, crq->adr.channel, crq->adr.sapi,
+			crq->adr.tei);
+	if (crq->adr.sapi != 0) /* not supported yet */
+		return -EINVAL;
+	if (crq->adr.tei > GROUP_TEI)
+		return -EINVAL;
+	if (crq->adr.tei < 64)
+		test_and_set_bit(OPTION_L2_FIXEDTEI, &opt);
+	if (crq->adr.tei == 0)
+		test_and_set_bit(OPTION_L2_PTP, &opt);
+	if (test_bit(MGR_OPT_NETWORK, &mgr->options)) {
+		if (crq->protocol == ISDN_P_LAPD_TE)
+			return -EPROTONOSUPPORT;
+		if ((crq->adr.tei != 0) && (crq->adr.tei != 127))
+			return -EINVAL;
+		if (mgr->up) {
+			printk(KERN_WARNING
+			    "%s: only one network manager is allowed\n",
+			    __func__);
+			return -EBUSY;
+		}
+	} else if (test_bit(MGR_OPT_USER, &mgr->options)) {
+		if (crq->protocol == ISDN_P_LAPD_NT)
+			return -EPROTONOSUPPORT;
+		if ((crq->adr.tei >= 64) && (crq->adr.tei < GROUP_TEI))
+			return -EINVAL; /* dyn tei */
+	} else {
+		if (crq->protocol == ISDN_P_LAPD_NT)
+			test_and_set_bit(MGR_OPT_NETWORK, &mgr->options);
+		if (crq->protocol == ISDN_P_LAPD_TE)
+			test_and_set_bit(MGR_OPT_USER, &mgr->options);
+	}
+	if (mgr->ch.st->dev->Dprotocols
+	  & ((1 << ISDN_P_TE_E1) | (1 << ISDN_P_NT_E1)))
+		test_and_set_bit(OPTION_L2_PMX, &opt);
+	if ((crq->protocol == ISDN_P_LAPD_NT) && (crq->adr.tei == 127)) {
+		mgr->up = crq->ch;
+		id = DL_INFO_L2_CONNECT;
+		teiup_create(mgr, DL_INFORMATION_IND, sizeof(id), &id);
+		crq->ch = NULL;
+		if (!list_empty(&mgr->layer2)) {
+			read_lock_irqsave(&mgr->lock, flags);
+			list_for_each_entry(l2, &mgr->layer2, list) {
+				l2->up = mgr->up;
+				l2->ch.ctrl(&l2->ch, OPEN_CHANNEL, NULL);
+			}
+			read_unlock_irqrestore(&mgr->lock, flags);
+		}
+		return 0;
+	}
+	l2 = create_l2(crq->ch, crq->protocol, (u_int)opt,
+		(u_long)crq->adr.tei);
+	if (!l2)
+		return -ENOMEM;
+	l2->tm = kzalloc(sizeof(struct teimgr), GFP_KERNEL);
+	if (!l2->tm) {
+		kfree(l2);
+		printk(KERN_ERR "kmalloc teimgr failed\n");
+		return -ENOMEM;
+	}
+	l2->tm->mgr = mgr;
+	l2->tm->l2 = l2;
+	l2->tm->tei_m.debug = *debug & DEBUG_L2_TEIFSM;
+	l2->tm->tei_m.userdata = l2->tm;
+	l2->tm->tei_m.printdebug = tei_debug;
+	if (crq->protocol == ISDN_P_LAPD_TE) {
+		l2->tm->tei_m.fsm = &teifsmu;
+		l2->tm->tei_m.state = ST_TEI_NOP;
+		l2->tm->tval = 1000; /* T201  1 sec */
+	} else {
+		l2->tm->tei_m.fsm = &teifsmn;
+		l2->tm->tei_m.state = ST_TEI_NOP;
+		l2->tm->tval = 2000; /* T202  2 sec */
+	}
+	mISDN_FsmInitTimer(&l2->tm->tei_m, &l2->tm->timer);
+	write_lock_irqsave(&mgr->lock, flags);
+	id = get_free_id(mgr);
+	list_add_tail(&l2->list, &mgr->layer2);
+	write_unlock_irqrestore(&mgr->lock, flags);
+	if (id < 0) {
+		l2->ch.ctrl(&l2->ch, CLOSE_CHANNEL, NULL);
+	} else {
+		l2->ch.nr = id;
+		l2->up->nr = id;
+		crq->ch = &l2->ch;
+		id = 0;
+	}
+	return id;
+}
+
+static int
+mgr_send(struct mISDNchannel *ch, struct sk_buff *skb)
+{
+	struct manager	*mgr;
+	struct mISDNhead	*hh =  mISDN_HEAD_P(skb);
+	int			ret = -EINVAL;
+
+	mgr = container_of(ch, struct manager, ch);
+	if (*debug & DEBUG_L2_RECV)
+		printk(KERN_DEBUG "%s: prim(%x) id(%x)\n",
+		    __func__, hh->prim, hh->id);
+	switch (hh->prim) {
+	case PH_DATA_IND:
+		mISDN_FsmEvent(&mgr->deact, EV_UI, NULL);
+		ret = ph_data_ind(mgr, skb);
+		break;
+	case PH_DATA_CNF:
+		do_ack(mgr, hh->id);
+		ret = 0;
+		break;
+	case PH_ACTIVATE_IND:
+		test_and_set_bit(MGR_PH_ACTIVE, &mgr->options);
+		mISDN_FsmEvent(&mgr->deact, EV_ACTIVATE_IND, NULL);
+		do_send(mgr);
+		ret = 0;
+		break;
+	case PH_DEACTIVATE_IND:
+		test_and_clear_bit(MGR_PH_ACTIVE, &mgr->options);
+		mISDN_FsmEvent(&mgr->deact, EV_DEACTIVATE_IND, NULL);
+		ret = 0;
+		break;
+	case DL_UNITDATA_REQ:
+		return dl_unit_data(mgr, skb);
+	}
+	if (!ret)
+		dev_kfree_skb(skb);
+	return ret;
+}
+
+static int
+free_teimanager(struct manager *mgr)
+{
+	struct layer2	*l2, *nl2;
+
+	if (test_bit(MGR_OPT_NETWORK, &mgr->options)) {
+		/* not locked lock is taken in release tei */
+		mgr->up = NULL;
+		if (test_bit(OPTION_L2_CLEANUP, &mgr->options)) {
+			list_for_each_entry_safe(l2, nl2, &mgr->layer2, list) {
+				put_tei_msg(mgr, ID_REMOVE, 0, l2->tei);
+				mutex_lock(&mgr->ch.st->lmutex);
+				list_del(&l2->ch.list);
+				mutex_unlock(&mgr->ch.st->lmutex);
+				l2->ch.ctrl(&l2->ch, CLOSE_CHANNEL, NULL);
+			}
+			test_and_clear_bit(MGR_OPT_NETWORK, &mgr->options);
+		} else {
+			list_for_each_entry_safe(l2, nl2, &mgr->layer2, list) {
+				l2->up = NULL;
+			}
+		}
+	}
+	if (test_bit(MGR_OPT_USER, &mgr->options)) {
+		if (list_empty(&mgr->layer2))
+			test_and_clear_bit(MGR_OPT_USER, &mgr->options);
+	}
+	mgr->ch.st->dev->D.ctrl(&mgr->ch.st->dev->D, CLOSE_CHANNEL, NULL);
+	return 0;
+}
+
+static int
+ctrl_teimanager(struct manager *mgr, void *arg)
+{
+	/* currently we only have one option */
+	int	clean = *((int *)arg);
+
+	if (clean)
+		test_and_set_bit(OPTION_L2_CLEANUP, &mgr->options);
+	else
+		test_and_clear_bit(OPTION_L2_CLEANUP, &mgr->options);
+	return 0;
+}
+
+/* This function does create a L2 for fixed TEI in NT Mode */
+static int
+check_data(struct manager *mgr, struct sk_buff *skb)
+{
+	struct mISDNhead	*hh =  mISDN_HEAD_P(skb);
+	int			ret, tei;
+	struct layer2		*l2;
+
+	if (*debug & DEBUG_L2_CTRL)
+		printk(KERN_DEBUG "%s: prim(%x) id(%x)\n",
+		    __func__, hh->prim, hh->id);
+	if (test_bit(MGR_OPT_USER, &mgr->options))
+		return -ENOTCONN;
+	if (hh->prim != PH_DATA_IND)
+		return -ENOTCONN;
+	if (skb->len != 3)
+		return -ENOTCONN;
+	if (skb->data[0] != 0)
+		/* only SAPI 0 command */
+		return -ENOTCONN;
+	if (!(skb->data[1] & 1)) /* invalid EA1 */
+		return -EINVAL;
+	tei = skb->data[1] >> 0;
+	if (tei > 63) /* not a fixed tei */
+		return -ENOTCONN;
+	if ((skb->data[2] & ~0x10) != SABME)
+		return -ENOTCONN;
+	/* We got a SABME for a fixed TEI */
+	l2 = create_new_tei(mgr, tei);
+	if (!l2)
+		return -ENOMEM;
+	ret = l2->ch.send(&l2->ch, skb);
+	return ret;
+}
+
+void
+delete_teimanager(struct mISDNchannel *ch)
+{
+	struct manager	*mgr;
+	struct layer2	*l2, *nl2;
+
+	mgr = container_of(ch, struct manager, ch);
+	/* not locked lock is taken in release tei */
+	list_for_each_entry_safe(l2, nl2, &mgr->layer2, list) {
+		mutex_lock(&mgr->ch.st->lmutex);
+		list_del(&l2->ch.list);
+		mutex_unlock(&mgr->ch.st->lmutex);
+		l2->ch.ctrl(&l2->ch, CLOSE_CHANNEL, NULL);
+	}
+	list_del(&mgr->ch.list);
+	list_del(&mgr->bcast.list);
+	skb_queue_purge(&mgr->sendq);
+	kfree(mgr);
+}
+
+static int
+mgr_ctrl(struct mISDNchannel *ch, u_int cmd, void *arg)
+{
+	struct manager	*mgr;
+	int		ret = -EINVAL;
+
+	mgr = container_of(ch, struct manager, ch);
+	if (*debug & DEBUG_L2_CTRL)
+		printk(KERN_DEBUG "%s(%x, %p)\n", __func__, cmd, arg);
+	switch (cmd) {
+	case OPEN_CHANNEL:
+		ret = create_teimgr(mgr, arg);
+		break;
+	case CLOSE_CHANNEL:
+		ret = free_teimanager(mgr);
+		break;
+	case CONTROL_CHANNEL:
+		ret = ctrl_teimanager(mgr, arg);
+		break;
+	case CHECK_DATA:
+		ret = check_data(mgr, arg);
+		break;
+	}
+	return ret;
+}
+
+static int
+mgr_bcast(struct mISDNchannel *ch, struct sk_buff *skb)
+{
+	struct manager		*mgr = container_of(ch, struct manager, bcast);
+	struct mISDNhead	*hh = mISDN_HEAD_P(skb);
+	struct sk_buff		*cskb = NULL;
+	struct layer2		*l2;
+	u_long			flags;
+	int			ret;
+
+	read_lock_irqsave(&mgr->lock, flags);
+	list_for_each_entry(l2, &mgr->layer2, list) {
+		if ((hh->id & MISDN_ID_SAPI_MASK) ==
+		    (l2->ch.addr & MISDN_ID_SAPI_MASK)) {
+			if (list_is_last(&l2->list, &mgr->layer2)) {
+				cskb = skb;
+				skb = NULL;
+			} else {
+				if (!cskb)
+					cskb = skb_copy(skb, GFP_KERNEL);
+			}
+			if (cskb) {
+				ret = l2->ch.send(&l2->ch, cskb);
+				if (ret) {
+					if (*debug & DEBUG_SEND_ERR)
+						printk(KERN_DEBUG
+						    "%s ch%d prim(%x) addr(%x)"
+						    " err %d\n",
+						    __func__, l2->ch.nr,
+						    hh->prim, l2->ch.addr, ret);
+				} else
+					cskb = NULL;
+			} else {
+				printk(KERN_WARNING "%s ch%d addr %x no mem\n",
+				    __func__, ch->nr, ch->addr);
+				goto out;
+			}
+		}
+	}
+out:
+	read_unlock_irqrestore(&mgr->lock, flags);
+	if (cskb)
+		dev_kfree_skb(cskb);
+	if (skb)
+		dev_kfree_skb(skb);
+	return 0;
+}
+
+static int
+mgr_bcast_ctrl(struct mISDNchannel *ch, u_int cmd, void *arg)
+{
+
+	return -EINVAL;
+}
+
+int
+create_teimanager(struct mISDNdevice *dev)
+{
+	struct manager *mgr;
+
+	mgr = kzalloc(sizeof(struct manager), GFP_KERNEL);
+	if (!mgr)
+		return -ENOMEM;
+	INIT_LIST_HEAD(&mgr->layer2);
+	mgr->lock = __RW_LOCK_UNLOCKED(mgr->lock);
+	skb_queue_head_init(&mgr->sendq);
+	mgr->nextid = 1;
+	mgr->lastid = MISDN_ID_NONE;
+	mgr->ch.send = mgr_send;
+	mgr->ch.ctrl = mgr_ctrl;
+	mgr->ch.st = dev->D.st;
+	set_channel_address(&mgr->ch, TEI_SAPI, GROUP_TEI);
+	add_layer2(&mgr->ch, dev->D.st);
+	mgr->bcast.send = mgr_bcast;
+	mgr->bcast.ctrl = mgr_bcast_ctrl;
+	mgr->bcast.st = dev->D.st;
+	set_channel_address(&mgr->bcast, 0, GROUP_TEI);
+	add_layer2(&mgr->bcast, dev->D.st);
+	mgr->deact.debug = *debug & DEBUG_MANAGER;
+	mgr->deact.userdata = mgr;
+	mgr->deact.printdebug = da_debug;
+	mgr->deact.fsm = &deactfsm;
+	mgr->deact.state = ST_L1_DEACT;
+	mISDN_FsmInitTimer(&mgr->deact, &mgr->datimer);
+	dev->teimgr = &mgr->ch;
+	return 0;
+}
+
+int TEIInit(u_int *deb)
+{
+	debug = deb;
+	teifsmu.state_count = TEI_STATE_COUNT;
+	teifsmu.event_count = TEI_EVENT_COUNT;
+	teifsmu.strEvent = strTeiEvent;
+	teifsmu.strState = strTeiState;
+	mISDN_FsmNew(&teifsmu, TeiFnListUser, ARRAY_SIZE(TeiFnListUser));
+	teifsmn.state_count = TEI_STATE_COUNT;
+	teifsmn.event_count = TEI_EVENT_COUNT;
+	teifsmn.strEvent = strTeiEvent;
+	teifsmn.strState = strTeiState;
+	mISDN_FsmNew(&teifsmn, TeiFnListNet, ARRAY_SIZE(TeiFnListNet));
+	deactfsm.state_count =  DEACT_STATE_COUNT;
+	deactfsm.event_count = DEACT_EVENT_COUNT;
+	deactfsm.strEvent = strDeactEvent;
+	deactfsm.strState = strDeactState;
+	mISDN_FsmNew(&deactfsm, DeactFnList, ARRAY_SIZE(DeactFnList));
+	return 0;
+}
+
+void TEIFree(void)
+{
+	mISDN_FsmFree(&teifsmu);
+	mISDN_FsmFree(&teifsmn);
+	mISDN_FsmFree(&deactfsm);
+}
diff --git a/drivers/isdn/mISDN/timerdev.c b/drivers/isdn/mISDN/timerdev.c
new file mode 100644
index 000000000000..b5fabc7019d8
--- /dev/null
+++ b/drivers/isdn/mISDN/timerdev.c
@@ -0,0 +1,301 @@
+/*
+ *
+ * general timer device for using in ISDN stacks
+ *
+ * Author	Karsten Keil <kkeil@novell.com>
+ *
+ * Copyright 2008  by Karsten Keil <kkeil@novell.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <linux/poll.h>
+#include <linux/vmalloc.h>
+#include <linux/timer.h>
+#include <linux/miscdevice.h>
+#include <linux/module.h>
+#include <linux/mISDNif.h>
+
+static int	*debug;
+
+
+struct mISDNtimerdev {
+	int			next_id;
+	struct list_head	pending;
+	struct list_head	expired;
+	wait_queue_head_t	wait;
+	u_int			work;
+	spinlock_t		lock; /* protect lists */
+};
+
+struct mISDNtimer {
+	struct list_head	list;
+	struct  mISDNtimerdev	*dev;
+	struct timer_list	tl;
+	int			id;
+};
+
+static int
+mISDN_open(struct inode *ino, struct file *filep)
+{
+	struct mISDNtimerdev	*dev;
+
+	if (*debug & DEBUG_TIMER)
+		printk(KERN_DEBUG "%s(%p,%p)\n", __func__, ino, filep);
+	dev = kmalloc(sizeof(struct mISDNtimerdev) , GFP_KERNEL);
+	if (!dev)
+		return -ENOMEM;
+	dev->next_id = 1;
+	INIT_LIST_HEAD(&dev->pending);
+	INIT_LIST_HEAD(&dev->expired);
+	spin_lock_init(&dev->lock);
+	dev->work = 0;
+	init_waitqueue_head(&dev->wait);
+	filep->private_data = dev;
+	__module_get(THIS_MODULE);
+	return 0;
+}
+
+static int
+mISDN_close(struct inode *ino, struct file *filep)
+{
+	struct mISDNtimerdev	*dev = filep->private_data;
+	struct mISDNtimer	*timer, *next;
+
+	if (*debug & DEBUG_TIMER)
+		printk(KERN_DEBUG "%s(%p,%p)\n", __func__, ino, filep);
+	list_for_each_entry_safe(timer, next, &dev->pending, list) {
+		del_timer(&timer->tl);
+		kfree(timer);
+	}
+	list_for_each_entry_safe(timer, next, &dev->expired, list) {
+		kfree(timer);
+	}
+	kfree(dev);
+	module_put(THIS_MODULE);
+	return 0;
+}
+
+static ssize_t
+mISDN_read(struct file *filep, char *buf, size_t count, loff_t *off)
+{
+	struct mISDNtimerdev	*dev = filep->private_data;
+	struct mISDNtimer	*timer;
+	u_long	flags;
+	int	ret = 0;
+
+	if (*debug & DEBUG_TIMER)
+		printk(KERN_DEBUG "%s(%p, %p, %d, %p)\n", __func__,
+			filep, buf, (int)count, off);
+	if (*off != filep->f_pos)
+		return -ESPIPE;
+
+	if (list_empty(&dev->expired) && (dev->work == 0)) {
+		if (filep->f_flags & O_NONBLOCK)
+			return -EAGAIN;
+		wait_event_interruptible(dev->wait, (dev->work ||
+		    !list_empty(&dev->expired)));
+		if (signal_pending(current))
+			return -ERESTARTSYS;
+	}
+	if (count < sizeof(int))
+		return -ENOSPC;
+	if (dev->work)
+		dev->work = 0;
+	if (!list_empty(&dev->expired)) {
+		spin_lock_irqsave(&dev->lock, flags);
+		timer = (struct mISDNtimer *)dev->expired.next;
+		list_del(&timer->list);
+		spin_unlock_irqrestore(&dev->lock, flags);
+		if (put_user(timer->id, (int *)buf))
+			ret = -EFAULT;
+		else
+			ret = sizeof(int);
+		kfree(timer);
+	}
+	return ret;
+}
+
+static loff_t
+mISDN_llseek(struct file *filep, loff_t offset, int orig)
+{
+	return -ESPIPE;
+}
+
+static ssize_t
+mISDN_write(struct file *filep, const char *buf, size_t count, loff_t *off)
+{
+	return -EOPNOTSUPP;
+}
+
+static unsigned int
+mISDN_poll(struct file *filep, poll_table *wait)
+{
+	struct mISDNtimerdev	*dev = filep->private_data;
+	unsigned int		mask = POLLERR;
+
+	if (*debug & DEBUG_TIMER)
+		printk(KERN_DEBUG "%s(%p, %p)\n", __func__, filep, wait);
+	if (dev) {
+		poll_wait(filep, &dev->wait, wait);
+		mask = 0;
+		if (dev->work || !list_empty(&dev->expired))
+			mask |= (POLLIN | POLLRDNORM);
+		if (*debug & DEBUG_TIMER)
+			printk(KERN_DEBUG "%s work(%d) empty(%d)\n", __func__,
+				dev->work, list_empty(&dev->expired));
+	}
+	return mask;
+}
+
+static void
+dev_expire_timer(struct mISDNtimer *timer)
+{
+	u_long			flags;
+
+	spin_lock_irqsave(&timer->dev->lock, flags);
+	list_del(&timer->list);
+	list_add_tail(&timer->list, &timer->dev->expired);
+	spin_unlock_irqrestore(&timer->dev->lock, flags);
+	wake_up_interruptible(&timer->dev->wait);
+}
+
+static int
+misdn_add_timer(struct mISDNtimerdev *dev, int timeout)
+{
+	int 			id;
+	u_long			flags;
+	struct mISDNtimer	*timer;
+
+	if (!timeout) {
+		dev->work = 1;
+		wake_up_interruptible(&dev->wait);
+		id = 0;
+	} else {
+		timer = kzalloc(sizeof(struct mISDNtimer), GFP_KERNEL);
+		if (!timer)
+			return -ENOMEM;
+		spin_lock_irqsave(&dev->lock, flags);
+		timer->id = dev->next_id++;
+		if (dev->next_id < 0)
+			dev->next_id = 1;
+		list_add_tail(&timer->list, &dev->pending);
+		spin_unlock_irqrestore(&dev->lock, flags);
+		timer->dev = dev;
+		timer->tl.data = (long)timer;
+		timer->tl.function = (void *) dev_expire_timer;
+		init_timer(&timer->tl);
+		timer->tl.expires = jiffies + ((HZ * (u_long)timeout) / 1000);
+		add_timer(&timer->tl);
+		id = timer->id;
+	}
+	return id;
+}
+
+static int
+misdn_del_timer(struct mISDNtimerdev *dev, int id)
+{
+	u_long			flags;
+	struct mISDNtimer	*timer;
+	int			ret = 0;
+
+	spin_lock_irqsave(&dev->lock, flags);
+	list_for_each_entry(timer, &dev->pending, list) {
+		if (timer->id == id) {
+			list_del_init(&timer->list);
+			del_timer(&timer->tl);
+			ret = timer->id;
+			kfree(timer);
+			goto unlock;
+		}
+	}
+unlock:
+	spin_unlock_irqrestore(&dev->lock, flags);
+	return ret;
+}
+
+static int
+mISDN_ioctl(struct inode *inode, struct file *filep, unsigned int cmd,
+    unsigned long arg)
+{
+	struct mISDNtimerdev	*dev = filep->private_data;
+	int			id, tout, ret = 0;
+
+
+	if (*debug & DEBUG_TIMER)
+		printk(KERN_DEBUG "%s(%p, %x, %lx)\n", __func__,
+		    filep, cmd, arg);
+	switch (cmd) {
+	case IMADDTIMER:
+		if (get_user(tout, (int __user *)arg)) {
+			ret = -EFAULT;
+			break;
+		}
+		id = misdn_add_timer(dev, tout);
+		if (*debug & DEBUG_TIMER)
+			printk(KERN_DEBUG "%s add %d id %d\n", __func__,
+			    tout, id);
+		if (id < 0) {
+			ret = id;
+			break;
+		}
+		if (put_user(id, (int __user *)arg))
+			ret = -EFAULT;
+		break;
+	case IMDELTIMER:
+		if (get_user(id, (int __user *)arg)) {
+			ret = -EFAULT;
+			break;
+		}
+		if (*debug & DEBUG_TIMER)
+			printk(KERN_DEBUG "%s del id %d\n", __func__, id);
+		id = misdn_del_timer(dev, id);
+		if (put_user(id, (int __user *)arg))
+			ret = -EFAULT;
+		break;
+	default:
+		ret = -EINVAL;
+	}
+	return ret;
+}
+
+static struct file_operations mISDN_fops = {
+	.llseek		= mISDN_llseek,
+	.read		= mISDN_read,
+	.write		= mISDN_write,
+	.poll		= mISDN_poll,
+	.ioctl		= mISDN_ioctl,
+	.open		= mISDN_open,
+	.release	= mISDN_close,
+};
+
+static struct miscdevice mISDNtimer = {
+	.minor	= MISC_DYNAMIC_MINOR,
+	.name	= "mISDNtimer",
+	.fops	= &mISDN_fops,
+};
+
+int
+mISDN_inittimer(int *deb)
+{
+	int	err;
+
+	debug = deb;
+	err = misc_register(&mISDNtimer);
+	if (err)
+		printk(KERN_WARNING "mISDN: Could not register timer device\n");
+	return err;
+}
+
+void mISDN_timer_cleanup(void)
+{
+	misc_deregister(&mISDNtimer);
+}
diff --git a/drivers/leds/leds-ams-delta.c b/drivers/leds/leds-ams-delta.c
index c37bb0d5a0c5..32c98b2efa3f 100644
--- a/drivers/leds/leds-ams-delta.c
+++ b/drivers/leds/leds-ams-delta.c
@@ -12,7 +12,7 @@
 #include <linux/init.h>
 #include <linux/platform_device.h>
 #include <linux/leds.h>
-#include <asm/arch/board-ams-delta.h>
+#include <mach/board-ams-delta.h>
 
 /*
  * Our context
diff --git a/drivers/leds/leds-cm-x270.c b/drivers/leds/leds-cm-x270.c
index accc7eddb788..836a43d776e6 100644
--- a/drivers/leds/leds-cm-x270.c
+++ b/drivers/leds/leds-cm-x270.c
@@ -18,8 +18,8 @@
 #include <linux/platform_device.h>
 #include <linux/leds.h>
 
-#include <asm/arch/hardware.h>
-#include <asm/arch/pxa-regs.h>
+#include <mach/hardware.h>
+#include <mach/pxa-regs.h>
 
 #define GPIO_RED_LED			(93)
 #define GPIO_GREEN_LED			(94)
diff --git a/drivers/leds/leds-corgi.c b/drivers/leds/leds-corgi.c
index a709704b9f93..bc2dcd89f635 100644
--- a/drivers/leds/leds-corgi.c
+++ b/drivers/leds/leds-corgi.c
@@ -15,10 +15,9 @@
 #include <linux/init.h>
 #include <linux/platform_device.h>
 #include <linux/leds.h>
-#include <asm/mach-types.h>
-#include <asm/arch/corgi.h>
-#include <asm/arch/hardware.h>
-#include <asm/arch/pxa-regs.h>
+#include <mach/corgi.h>
+#include <mach/hardware.h>
+#include <mach/pxa-regs.h>
 #include <asm/hardware/scoop.h>
 
 static void corgiled_amber_set(struct led_classdev *led_cdev,
diff --git a/drivers/leds/leds-fsg.c b/drivers/leds/leds-fsg.c
index a7421b8c47d8..be0e12144b8b 100644
--- a/drivers/leds/leds-fsg.c
+++ b/drivers/leds/leds-fsg.c
@@ -19,7 +19,7 @@
 #include <linux/init.h>
 #include <linux/platform_device.h>
 #include <linux/leds.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 
 static short __iomem *latch_address;
diff --git a/drivers/leds/leds-h1940.c b/drivers/leds/leds-h1940.c
index 73c705021686..11b77a70bbcb 100644
--- a/drivers/leds/leds-h1940.c
+++ b/drivers/leds/leds-h1940.c
@@ -16,9 +16,9 @@
 #include <linux/string.h>
 #include <linux/ctype.h>
 #include <linux/leds.h>
-#include <asm/arch/regs-gpio.h>
-#include <asm/hardware.h>
-#include <asm/arch/h1940-latch.h>
+#include <mach/regs-gpio.h>
+#include <mach/hardware.h>
+#include <mach/h1940-latch.h>
 
 /*
  * Green led.
diff --git a/drivers/leds/leds-locomo.c b/drivers/leds/leds-locomo.c
index 7295f7f52185..5d91362e3066 100644
--- a/drivers/leds/leds-locomo.c
+++ b/drivers/leds/leds-locomo.c
@@ -13,7 +13,7 @@
 #include <linux/device.h>
 #include <linux/leds.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/hardware/locomo.h>
 
 static void locomoled_brightness_set(struct led_classdev *led_cdev,
diff --git a/drivers/leds/leds-s3c24xx.c b/drivers/leds/leds-s3c24xx.c
index d4f5021dccbf..25a07f2643ad 100644
--- a/drivers/leds/leds-s3c24xx.c
+++ b/drivers/leds/leds-s3c24xx.c
@@ -16,9 +16,9 @@
 #include <linux/platform_device.h>
 #include <linux/leds.h>
 
-#include <asm/hardware.h>
-#include <asm/arch/regs-gpio.h>
-#include <asm/arch/leds-gpio.h>
+#include <mach/hardware.h>
+#include <mach/regs-gpio.h>
+#include <mach/leds-gpio.h>
 
 /* our context */
 
diff --git a/drivers/leds/leds-spitz.c b/drivers/leds/leds-spitz.c
index e75e8543bc5a..178831c64bfb 100644
--- a/drivers/leds/leds-spitz.c
+++ b/drivers/leds/leds-spitz.c
@@ -17,9 +17,9 @@
 #include <linux/leds.h>
 #include <asm/hardware/scoop.h>
 #include <asm/mach-types.h>
-#include <asm/arch/hardware.h>
-#include <asm/arch/pxa-regs.h>
-#include <asm/arch/spitz.h>
+#include <mach/hardware.h>
+#include <mach/pxa-regs.h>
+#include <mach/spitz.h>
 
 static void spitzled_amber_set(struct led_classdev *led_cdev,
 			       enum led_brightness value)
diff --git a/drivers/lguest/core.c b/drivers/lguest/core.c
index 5eea4356d703..90663e01a56e 100644
--- a/drivers/lguest/core.c
+++ b/drivers/lguest/core.c
@@ -135,6 +135,7 @@ static void unmap_switcher(void)
 	/* Now we just need to free the pages we copied the switcher into */
 	for (i = 0; i < TOTAL_SWITCHER_PAGES; i++)
 		__free_pages(switcher_page[i], 0);
+	kfree(switcher_page);
 }
 
 /*H:032
diff --git a/drivers/lguest/interrupts_and_traps.c b/drivers/lguest/interrupts_and_traps.c
index 0414ddf87587..a1039068f95c 100644
--- a/drivers/lguest/interrupts_and_traps.c
+++ b/drivers/lguest/interrupts_and_traps.c
@@ -406,7 +406,8 @@ void load_guest_idt_entry(struct lg_cpu *cpu, unsigned int num, u32 lo, u32 hi)
  * deliver_trap() to bounce it back into the Guest. */
 static void default_idt_entry(struct desc_struct *idt,
 			      int trap,
-			      const unsigned long handler)
+			      const unsigned long handler,
+			      const struct desc_struct *base)
 {
 	/* A present interrupt gate. */
 	u32 flags = 0x8e00;
@@ -415,6 +416,10 @@ static void default_idt_entry(struct desc_struct *idt,
 	 * the Guest to use the "int" instruction to trigger it. */
 	if (trap == LGUEST_TRAP_ENTRY)
 		flags |= (GUEST_PL << 13);
+	else if (base)
+		/* Copy priv. level from what Guest asked for.  This allows
+		 * debug (int 3) traps from Guest userspace, for example. */
+		flags |= (base->b & 0x6000);
 
 	/* Now pack it into the IDT entry in its weird format. */
 	idt->a = (LGUEST_CS<<16) | (handler&0x0000FFFF);
@@ -428,7 +433,7 @@ void setup_default_idt_entries(struct lguest_ro_state *state,
 	unsigned int i;
 
 	for (i = 0; i < ARRAY_SIZE(state->guest_idt); i++)
-		default_idt_entry(&state->guest_idt[i], i, def[i]);
+		default_idt_entry(&state->guest_idt[i], i, def[i], NULL);
 }
 
 /*H:240 We don't use the IDT entries in the "struct lguest" directly, instead
@@ -442,6 +447,8 @@ void copy_traps(const struct lg_cpu *cpu, struct desc_struct *idt,
 	/* We can simply copy the direct traps, otherwise we use the default
 	 * ones in the Switcher: they will return to the Host. */
 	for (i = 0; i < ARRAY_SIZE(cpu->arch.idt); i++) {
+		const struct desc_struct *gidt = &cpu->arch.idt[i];
+
 		/* If no Guest can ever override this trap, leave it alone. */
 		if (!direct_trap(i))
 			continue;
@@ -449,12 +456,15 @@ void copy_traps(const struct lg_cpu *cpu, struct desc_struct *idt,
 		/* Only trap gates (type 15) can go direct to the Guest.
 		 * Interrupt gates (type 14) disable interrupts as they are
 		 * entered, which we never let the Guest do.  Not present
-		 * entries (type 0x0) also can't go direct, of course. */
-		if (idt_type(cpu->arch.idt[i].a, cpu->arch.idt[i].b) == 0xF)
-			idt[i] = cpu->arch.idt[i];
+		 * entries (type 0x0) also can't go direct, of course.
+		 *
+		 * If it can't go direct, we still need to copy the priv. level:
+		 * they might want to give userspace access to a software
+		 * interrupt. */
+		if (idt_type(gidt->a, gidt->b) == 0xF)
+			idt[i] = *gidt;
 		else
-			/* Reset it to the default. */
-			default_idt_entry(&idt[i], i, def[i]);
+			default_idt_entry(&idt[i], i, def[i], gidt);
 	}
 }
 
diff --git a/drivers/lguest/lguest_device.c b/drivers/lguest/lguest_device.c
index 1a8de57289eb..a661bbdae3d6 100644
--- a/drivers/lguest/lguest_device.c
+++ b/drivers/lguest/lguest_device.c
@@ -98,16 +98,28 @@ static u32 lg_get_features(struct virtio_device *vdev)
 	return features;
 }
 
-static void lg_set_features(struct virtio_device *vdev, u32 features)
+/* The virtio core takes the features the Host offers, and copies the
+ * ones supported by the driver into the vdev->features array.  Once
+ * that's all sorted out, this routine is called so we can tell the
+ * Host which features we understand and accept. */
+static void lg_finalize_features(struct virtio_device *vdev)
 {
-	unsigned int i;
+	unsigned int i, bits;
 	struct lguest_device_desc *desc = to_lgdev(vdev)->desc;
 	/* Second half of bitmap is features we accept. */
 	u8 *out_features = lg_features(desc) + desc->feature_len;
 
+	/* Give virtio_ring a chance to accept features. */
+	vring_transport_features(vdev);
+
+	/* The vdev->feature array is a Linux bitmask: this isn't the
+	 * same as a the simple array of bits used by lguest devices
+	 * for features.  So we do this slow, manual conversion which is
+	 * completely general. */
 	memset(out_features, 0, desc->feature_len);
-	for (i = 0; i < min(desc->feature_len * 8, 32); i++) {
-		if (features & (1 << i))
+	bits = min_t(unsigned, desc->feature_len, sizeof(vdev->features)) * 8;
+	for (i = 0; i < bits; i++) {
+		if (test_bit(i, vdev->features))
 			out_features[i / 8] |= (1 << (i % 8));
 	}
 }
@@ -297,7 +309,7 @@ static void lg_del_vq(struct virtqueue *vq)
 /* The ops structure which hooks everything together. */
 static struct virtio_config_ops lguest_config_ops = {
 	.get_features = lg_get_features,
-	.set_features = lg_set_features,
+	.finalize_features = lg_finalize_features,
 	.get = lg_get,
 	.set = lg_set,
 	.get_status = lg_get_status,
diff --git a/drivers/lguest/page_tables.c b/drivers/lguest/page_tables.c
index d93500f24fbb..81d0c6053447 100644
--- a/drivers/lguest/page_tables.c
+++ b/drivers/lguest/page_tables.c
@@ -108,9 +108,8 @@ static unsigned long gpte_addr(pgd_t gpgd, unsigned long vaddr)
 }
 /*:*/
 
-/*M:014 get_pfn is slow; it takes the mmap sem and calls get_user_pages.  We
- * could probably try to grab batches of pages here as an optimization
- * (ie. pre-faulting). :*/
+/*M:014 get_pfn is slow: we could probably try to grab batches of pages here as
+ * an optimization (ie. pre-faulting). :*/
 
 /*H:350 This routine takes a page number given by the Guest and converts it to
  * an actual, physical page number.  It can fail for several reasons: the
@@ -123,19 +122,13 @@ static unsigned long gpte_addr(pgd_t gpgd, unsigned long vaddr)
 static unsigned long get_pfn(unsigned long virtpfn, int write)
 {
 	struct page *page;
-	/* This value indicates failure. */
-	unsigned long ret = -1UL;
 
-	/* get_user_pages() is a complex interface: it gets the "struct
-	 * vm_area_struct" and "struct page" assocated with a range of pages.
-	 * It also needs the task's mmap_sem held, and is not very quick.
-	 * It returns the number of pages it got. */
-	down_read(&current->mm->mmap_sem);
-	if (get_user_pages(current, current->mm, virtpfn << PAGE_SHIFT,
-			   1, write, 1, &page, NULL) == 1)
-		ret = page_to_pfn(page);
-	up_read(&current->mm->mmap_sem);
-	return ret;
+	/* gup me one page at this address please! */
+	if (get_user_pages_fast(virtpfn << PAGE_SHIFT, 1, write, &page) == 1)
+		return page_to_pfn(page);
+
+	/* This value indicates failure. */
+	return -1UL;
 }
 
 /*H:340 Converting a Guest page table entry to a shadow (ie. real) page table
@@ -174,7 +167,7 @@ static pte_t gpte_to_spte(struct lg_cpu *cpu, pte_t gpte, int write)
 /*H:460 And to complete the chain, release_pte() looks like this: */
 static void release_pte(pte_t pte)
 {
-	/* Remember that get_user_pages() took a reference to the page, in
+	/* Remember that get_user_pages_fast() took a reference to the page, in
 	 * get_pfn()?  We have to put it back now. */
 	if (pte_flags(pte) & _PAGE_PRESENT)
 		put_page(pfn_to_page(pte_pfn(pte)));
diff --git a/drivers/lguest/x86/core.c b/drivers/lguest/x86/core.c
index 95dfda52b4f9..bf7942327bda 100644
--- a/drivers/lguest/x86/core.c
+++ b/drivers/lguest/x86/core.c
@@ -480,7 +480,7 @@ void __init lguest_arch_host_init(void)
 		 * bit on its CPU, depending on the argument (0 == unset). */
 		on_each_cpu(adjust_pge, (void *)0, 1);
 		/* Turn off the feature in the global feature set. */
-		clear_bit(X86_FEATURE_PGE, boot_cpu_data.x86_capability);
+		clear_cpu_cap(&boot_cpu_data, X86_FEATURE_PGE);
 	}
 	put_online_cpus();
 };
@@ -491,7 +491,7 @@ void __exit lguest_arch_host_fini(void)
 	/* If we had PGE before we started, turn it back on now. */
 	get_online_cpus();
 	if (cpu_had_pge) {
-		set_bit(X86_FEATURE_PGE, boot_cpu_data.x86_capability);
+		set_cpu_cap(&boot_cpu_data, X86_FEATURE_PGE);
 		/* adjust_pge's argument "1" means set PGE. */
 		on_each_cpu(adjust_pge, (void *)1, 1);
 	}
diff --git a/drivers/macintosh/mediabay.c b/drivers/macintosh/mediabay.c
index b1e5b4705250..d7e46d345d9e 100644
--- a/drivers/macintosh/mediabay.c
+++ b/drivers/macintosh/mediabay.c
@@ -16,7 +16,6 @@
 #include <linux/delay.h>
 #include <linux/sched.h>
 #include <linux/timer.h>
-#include <linux/hdreg.h>
 #include <linux/stddef.h>
 #include <linux/init.h>
 #include <linux/ide.h>
diff --git a/drivers/md/bitmap.c b/drivers/md/bitmap.c
index 621a272a2c74..ac89a5deaca2 100644
--- a/drivers/md/bitmap.c
+++ b/drivers/md/bitmap.c
@@ -238,15 +238,47 @@ static struct page *read_sb_page(mddev_t *mddev, long offset, unsigned long inde
 
 }
 
+static mdk_rdev_t *next_active_rdev(mdk_rdev_t *rdev, mddev_t *mddev)
+{
+	/* Iterate the disks of an mddev, using rcu to protect access to the
+	 * linked list, and raising the refcount of devices we return to ensure
+	 * they don't disappear while in use.
+	 * As devices are only added or removed when raid_disk is < 0 and
+	 * nr_pending is 0 and In_sync is clear, the entries we return will
+	 * still be in the same position on the list when we re-enter
+	 * list_for_each_continue_rcu.
+	 */
+	struct list_head *pos;
+	rcu_read_lock();
+	if (rdev == NULL)
+		/* start at the beginning */
+		pos = &mddev->disks;
+	else {
+		/* release the previous rdev and start from there. */
+		rdev_dec_pending(rdev, mddev);
+		pos = &rdev->same_set;
+	}
+	list_for_each_continue_rcu(pos, &mddev->disks) {
+		rdev = list_entry(pos, mdk_rdev_t, same_set);
+		if (rdev->raid_disk >= 0 &&
+		    test_bit(In_sync, &rdev->flags) &&
+		    !test_bit(Faulty, &rdev->flags)) {
+			/* this is a usable devices */
+			atomic_inc(&rdev->nr_pending);
+			rcu_read_unlock();
+			return rdev;
+		}
+	}
+	rcu_read_unlock();
+	return NULL;
+}
+
 static int write_sb_page(struct bitmap *bitmap, struct page *page, int wait)
 {
-	mdk_rdev_t *rdev;
+	mdk_rdev_t *rdev = NULL;
 	mddev_t *mddev = bitmap->mddev;
 
-	rcu_read_lock();
-	rdev_for_each_rcu(rdev, mddev)
-		if (test_bit(In_sync, &rdev->flags)
-		    && !test_bit(Faulty, &rdev->flags)) {
+	while ((rdev = next_active_rdev(rdev, mddev)) != NULL) {
 			int size = PAGE_SIZE;
 			if (page->index == bitmap->file_pages-1)
 				size = roundup(bitmap->last_page_size,
@@ -281,8 +313,7 @@ static int write_sb_page(struct bitmap *bitmap, struct page *page, int wait)
 				       + page->index * (PAGE_SIZE/512),
 				       size,
 				       page);
-		}
-	rcu_read_unlock();
+	}
 
 	if (wait)
 		md_super_wait(mddev);
@@ -1234,7 +1265,7 @@ int bitmap_startwrite(struct bitmap *bitmap, sector_t offset, unsigned long sect
 		case 0:
 			bitmap_file_set_bit(bitmap, offset);
 			bitmap_count_page(bitmap,offset, 1);
-			blk_plug_device(bitmap->mddev->queue);
+			blk_plug_device_unlocked(bitmap->mddev->queue);
 			/* fall through */
 		case 1:
 			*bmc = 2;
diff --git a/drivers/md/dm-mpath.c b/drivers/md/dm-mpath.c
index fea966d66f98..71dd65aa31b6 100644
--- a/drivers/md/dm-mpath.c
+++ b/drivers/md/dm-mpath.c
@@ -147,9 +147,12 @@ static struct priority_group *alloc_priority_group(void)
 static void free_pgpaths(struct list_head *pgpaths, struct dm_target *ti)
 {
 	struct pgpath *pgpath, *tmp;
+	struct multipath *m = ti->private;
 
 	list_for_each_entry_safe(pgpath, tmp, pgpaths, list) {
 		list_del(&pgpath->list);
+		if (m->hw_handler_name)
+			scsi_dh_detach(bdev_get_queue(pgpath->path.dev->bdev));
 		dm_put_device(ti, pgpath->path.dev);
 		free_pgpath(pgpath);
 	}
@@ -548,6 +551,7 @@ static struct pgpath *parse_path(struct arg_set *as, struct path_selector *ps,
 {
 	int r;
 	struct pgpath *p;
+	struct multipath *m = ti->private;
 
 	/* we need at least a path arg */
 	if (as->argc < 1) {
@@ -566,6 +570,15 @@ static struct pgpath *parse_path(struct arg_set *as, struct path_selector *ps,
 		goto bad;
 	}
 
+	if (m->hw_handler_name) {
+		r = scsi_dh_attach(bdev_get_queue(p->path.dev->bdev),
+				   m->hw_handler_name);
+		if (r < 0) {
+			dm_put_device(ti, p->path.dev);
+			goto bad;
+		}
+	}
+
 	r = ps->type->add_path(ps, &p->path, as->argc, as->argv, &ti->error);
 	if (r) {
 		dm_put_device(ti, p->path.dev);
diff --git a/drivers/md/dm-table.c b/drivers/md/dm-table.c
index 798e468103b8..61f441409234 100644
--- a/drivers/md/dm-table.c
+++ b/drivers/md/dm-table.c
@@ -316,29 +316,12 @@ static inline int check_space(struct dm_table *t)
  */
 static int lookup_device(const char *path, dev_t *dev)
 {
-	int r;
-	struct nameidata nd;
-	struct inode *inode;
-
-	if ((r = path_lookup(path, LOOKUP_FOLLOW, &nd)))
-		return r;
-
-	inode = nd.path.dentry->d_inode;
-	if (!inode) {
-		r = -ENOENT;
-		goto out;
-	}
-
-	if (!S_ISBLK(inode->i_mode)) {
-		r = -ENOTBLK;
-		goto out;
-	}
-
-	*dev = inode->i_rdev;
-
- out:
-	path_put(&nd.path);
-	return r;
+	struct block_device *bdev = lookup_bdev(path);
+	if (IS_ERR(bdev))
+		return PTR_ERR(bdev);
+	*dev = bdev->bd_dev;
+	bdput(bdev);
+	return 0;
 }
 
 /*
diff --git a/drivers/md/md.c b/drivers/md/md.c
index c2ff77ccec50..4790c83d78d0 100644
--- a/drivers/md/md.c
+++ b/drivers/md/md.c
@@ -2393,6 +2393,8 @@ static void analyze_sbs(mddev_t * mddev)
 
 }
 
+static void md_safemode_timeout(unsigned long data);
+
 static ssize_t
 safe_delay_show(mddev_t *mddev, char *page)
 {
@@ -2432,9 +2434,12 @@ safe_delay_store(mddev_t *mddev, const char *cbuf, size_t len)
 	if (msec == 0)
 		mddev->safemode_delay = 0;
 	else {
+		unsigned long old_delay = mddev->safemode_delay;
 		mddev->safemode_delay = (msec*HZ)/1000;
 		if (mddev->safemode_delay == 0)
 			mddev->safemode_delay = 1;
+		if (mddev->safemode_delay < old_delay)
+			md_safemode_timeout((unsigned long)mddev);
 	}
 	return len;
 }
@@ -3483,7 +3488,7 @@ static void md_safemode_timeout(unsigned long data)
 	if (!atomic_read(&mddev->writes_pending)) {
 		mddev->safemode = 1;
 		if (mddev->external)
-			sysfs_notify(&mddev->kobj, NULL, "array_state");
+			set_bit(MD_NOTIFY_ARRAY_STATE, &mddev->flags);
 	}
 	md_wakeup_thread(mddev->thread);
 }
@@ -3836,8 +3841,6 @@ static int do_md_stop(mddev_t * mddev, int mode, int is_open)
 
 		del_timer_sync(&mddev->safemode_timer);
 
-		invalidate_partition(disk, 0);
-
 		switch(mode) {
 		case 1: /* readonly */
 			err  = -ENXIO;
@@ -4634,6 +4637,11 @@ static int update_size(mddev_t *mddev, sector_t num_sectors)
 	 */
 	if (mddev->sync_thread)
 		return -EBUSY;
+	if (mddev->bitmap)
+		/* Sorry, cannot grow a bitmap yet, just remove it,
+		 * grow, and re-add.
+		 */
+		return -EBUSY;
 	rdev_for_each(rdev, tmp, mddev) {
 		sector_t avail;
 		avail = rdev->size * 2;
@@ -5993,10 +6001,11 @@ static int remove_and_add_spares(mddev_t *mddev)
 			}
 		}
 
-	if (mddev->degraded) {
+	if (mddev->degraded && ! mddev->ro) {
 		rdev_for_each(rdev, rtmp, mddev) {
 			if (rdev->raid_disk >= 0 &&
-			    !test_bit(In_sync, &rdev->flags))
+			    !test_bit(In_sync, &rdev->flags) &&
+			    !test_bit(Blocked, &rdev->flags))
 				spares++;
 			if (rdev->raid_disk < 0
 			    && !test_bit(Faulty, &rdev->flags)) {
@@ -6051,6 +6060,9 @@ void md_check_recovery(mddev_t *mddev)
 	if (mddev->bitmap)
 		bitmap_daemon_work(mddev->bitmap);
 
+	if (test_and_clear_bit(MD_NOTIFY_ARRAY_STATE, &mddev->flags))
+		sysfs_notify(&mddev->kobj, NULL, "array_state");
+
 	if (mddev->ro)
 		return;
 
@@ -6063,6 +6075,8 @@ void md_check_recovery(mddev_t *mddev)
 		flush_signals(current);
 	}
 
+	if (mddev->ro && !test_bit(MD_RECOVERY_NEEDED, &mddev->recovery))
+		return;
 	if ( ! (
 		(mddev->flags && !mddev->external) ||
 		test_bit(MD_RECOVERY_NEEDED, &mddev->recovery) ||
@@ -6076,6 +6090,15 @@ void md_check_recovery(mddev_t *mddev)
 	if (mddev_trylock(mddev)) {
 		int spares = 0;
 
+		if (mddev->ro) {
+			/* Only thing we do on a ro array is remove
+			 * failed devices.
+			 */
+			remove_and_add_spares(mddev);
+			clear_bit(MD_RECOVERY_NEEDED, &mddev->recovery);
+			goto unlock;
+		}
+
 		if (!mddev->external) {
 			int did_change = 0;
 			spin_lock_irq(&mddev->write_lock);
@@ -6113,7 +6136,8 @@ void md_check_recovery(mddev_t *mddev)
 			/* resync has finished, collect result */
 			md_unregister_thread(mddev->sync_thread);
 			mddev->sync_thread = NULL;
-			if (!test_bit(MD_RECOVERY_INTR, &mddev->recovery)) {
+			if (!test_bit(MD_RECOVERY_INTR, &mddev->recovery) &&
+			    !test_bit(MD_RECOVERY_REQUESTED, &mddev->recovery)) {
 				/* success...*/
 				/* activate any spares */
 				if (mddev->pers->spare_active(mddev))
@@ -6165,6 +6189,7 @@ void md_check_recovery(mddev_t *mddev)
 		} else if ((spares = remove_and_add_spares(mddev))) {
 			clear_bit(MD_RECOVERY_SYNC, &mddev->recovery);
 			clear_bit(MD_RECOVERY_CHECK, &mddev->recovery);
+			clear_bit(MD_RECOVERY_REQUESTED, &mddev->recovery);
 			set_bit(MD_RECOVERY_RECOVER, &mddev->recovery);
 		} else if (mddev->recovery_cp < MaxSector) {
 			set_bit(MD_RECOVERY_SYNC, &mddev->recovery);
@@ -6228,7 +6253,11 @@ static int md_notify_reboot(struct notifier_block *this,
 
 		for_each_mddev(mddev, tmp)
 			if (mddev_trylock(mddev)) {
-				do_md_stop (mddev, 1, 0);
+				/* Force a switch to readonly even array
+				 * appears to still be in use.  Hence
+				 * the '100'.
+				 */
+				do_md_stop (mddev, 1, 100);
 				mddev_unlock(mddev);
 			}
 		/*
diff --git a/drivers/md/raid10.c b/drivers/md/raid10.c
index 159535d73567..e34cd0e62473 100644
--- a/drivers/md/raid10.c
+++ b/drivers/md/raid10.c
@@ -76,11 +76,13 @@ static void r10bio_pool_free(void *r10_bio, void *data)
 	kfree(r10_bio);
 }
 
+/* Maximum size of each resync request */
 #define RESYNC_BLOCK_SIZE (64*1024)
-//#define RESYNC_BLOCK_SIZE PAGE_SIZE
-#define RESYNC_SECTORS (RESYNC_BLOCK_SIZE >> 9)
 #define RESYNC_PAGES ((RESYNC_BLOCK_SIZE + PAGE_SIZE-1) / PAGE_SIZE)
-#define RESYNC_WINDOW (2048*1024)
+/* amount of memory to reserve for resync requests */
+#define RESYNC_WINDOW (1024*1024)
+/* maximum number of concurrent requests, memory permitting */
+#define RESYNC_DEPTH (32*1024*1024/RESYNC_BLOCK_SIZE)
 
 /*
  * When performing a resync, we need to read and compare, so
@@ -215,6 +217,9 @@ static void reschedule_retry(r10bio_t *r10_bio)
 	conf->nr_queued ++;
 	spin_unlock_irqrestore(&conf->device_lock, flags);
 
+	/* wake up frozen array... */
+	wake_up(&conf->wait_barrier);
+
 	md_wakeup_thread(mddev->thread);
 }
 
@@ -687,7 +692,6 @@ static int flush_pending_writes(conf_t *conf)
  *    there is no normal IO happeing.  It must arrange to call
  *    lower_barrier when the particular background IO completes.
  */
-#define RESYNC_DEPTH 32
 
 static void raise_barrier(conf_t *conf, int force)
 {
diff --git a/drivers/md/raid5.c b/drivers/md/raid5.c
index 55e7c56045a0..224de022e7c5 100644
--- a/drivers/md/raid5.c
+++ b/drivers/md/raid5.c
@@ -2507,7 +2507,7 @@ static void handle_stripe_expansion(raid5_conf_t *conf, struct stripe_head *sh,
  *
  */
 
-static void handle_stripe5(struct stripe_head *sh)
+static bool handle_stripe5(struct stripe_head *sh)
 {
 	raid5_conf_t *conf = sh->raid_conf;
 	int disks = sh->disks, i;
@@ -2568,10 +2568,10 @@ static void handle_stripe5(struct stripe_head *sh)
 		if (dev->written)
 			s.written++;
 		rdev = rcu_dereference(conf->disks[i].rdev);
-		if (rdev && unlikely(test_bit(Blocked, &rdev->flags))) {
+		if (blocked_rdev == NULL &&
+		    rdev && unlikely(test_bit(Blocked, &rdev->flags))) {
 			blocked_rdev = rdev;
 			atomic_inc(&rdev->nr_pending);
-			break;
 		}
 		if (!rdev || !test_bit(In_sync, &rdev->flags)) {
 			/* The ReadError flag will just be confusing now */
@@ -2588,8 +2588,14 @@ static void handle_stripe5(struct stripe_head *sh)
 	rcu_read_unlock();
 
 	if (unlikely(blocked_rdev)) {
-		set_bit(STRIPE_HANDLE, &sh->state);
-		goto unlock;
+		if (s.syncing || s.expanding || s.expanded ||
+		    s.to_write || s.written) {
+			set_bit(STRIPE_HANDLE, &sh->state);
+			goto unlock;
+		}
+		/* There is nothing for the blocked_rdev to block */
+		rdev_dec_pending(blocked_rdev, conf->mddev);
+		blocked_rdev = NULL;
 	}
 
 	if (s.to_fill && !test_bit(STRIPE_BIOFILL_RUN, &sh->state)) {
@@ -2717,10 +2723,11 @@ static void handle_stripe5(struct stripe_head *sh)
 	if (sh->reconstruct_state == reconstruct_state_result) {
 		sh->reconstruct_state = reconstruct_state_idle;
 		clear_bit(STRIPE_EXPANDING, &sh->state);
-		for (i = conf->raid_disks; i--; )
+		for (i = conf->raid_disks; i--; ) {
 			set_bit(R5_Wantwrite, &sh->dev[i].flags);
-			set_bit(R5_LOCKED, &dev->flags);
+			set_bit(R5_LOCKED, &sh->dev[i].flags);
 			s.locked++;
+		}
 	}
 
 	if (s.expanded && test_bit(STRIPE_EXPANDING, &sh->state) &&
@@ -2754,9 +2761,11 @@ static void handle_stripe5(struct stripe_head *sh)
 	ops_run_io(sh, &s);
 
 	return_io(return_bi);
+
+	return blocked_rdev == NULL;
 }
 
-static void handle_stripe6(struct stripe_head *sh, struct page *tmp_page)
+static bool handle_stripe6(struct stripe_head *sh, struct page *tmp_page)
 {
 	raid6_conf_t *conf = sh->raid_conf;
 	int disks = sh->disks;
@@ -2829,10 +2838,10 @@ static void handle_stripe6(struct stripe_head *sh, struct page *tmp_page)
 		if (dev->written)
 			s.written++;
 		rdev = rcu_dereference(conf->disks[i].rdev);
-		if (rdev && unlikely(test_bit(Blocked, &rdev->flags))) {
+		if (blocked_rdev == NULL &&
+		    rdev && unlikely(test_bit(Blocked, &rdev->flags))) {
 			blocked_rdev = rdev;
 			atomic_inc(&rdev->nr_pending);
-			break;
 		}
 		if (!rdev || !test_bit(In_sync, &rdev->flags)) {
 			/* The ReadError flag will just be confusing now */
@@ -2850,9 +2859,16 @@ static void handle_stripe6(struct stripe_head *sh, struct page *tmp_page)
 	rcu_read_unlock();
 
 	if (unlikely(blocked_rdev)) {
-		set_bit(STRIPE_HANDLE, &sh->state);
-		goto unlock;
+		if (s.syncing || s.expanding || s.expanded ||
+		    s.to_write || s.written) {
+			set_bit(STRIPE_HANDLE, &sh->state);
+			goto unlock;
+		}
+		/* There is nothing for the blocked_rdev to block */
+		rdev_dec_pending(blocked_rdev, conf->mddev);
+		blocked_rdev = NULL;
 	}
+
 	pr_debug("locked=%d uptodate=%d to_read=%d"
 	       " to_write=%d failed=%d failed_num=%d,%d\n",
 	       s.locked, s.uptodate, s.to_read, s.to_write, s.failed,
@@ -2967,14 +2983,17 @@ static void handle_stripe6(struct stripe_head *sh, struct page *tmp_page)
 	ops_run_io(sh, &s);
 
 	return_io(return_bi);
+
+	return blocked_rdev == NULL;
 }
 
-static void handle_stripe(struct stripe_head *sh, struct page *tmp_page)
+/* returns true if the stripe was handled */
+static bool handle_stripe(struct stripe_head *sh, struct page *tmp_page)
 {
 	if (sh->raid_conf->level == 6)
-		handle_stripe6(sh, tmp_page);
+		return handle_stripe6(sh, tmp_page);
 	else
-		handle_stripe5(sh);
+		return handle_stripe5(sh);
 }
 
 
@@ -3692,7 +3711,9 @@ static inline sector_t sync_request(mddev_t *mddev, sector_t sector_nr, int *ski
 	clear_bit(STRIPE_INSYNC, &sh->state);
 	spin_unlock(&sh->lock);
 
-	handle_stripe(sh, NULL);
+	/* wait for any blocked device to be handled */
+	while(unlikely(!handle_stripe(sh, NULL)))
+		;
 	release_stripe(sh);
 
 	return STRIPE_SECTORS;
@@ -3811,10 +3832,8 @@ static void raid5d(mddev_t *mddev)
 
 		sh = __get_priority_stripe(conf);
 
-		if (!sh) {
-			async_tx_issue_pending_all();
+		if (!sh)
 			break;
-		}
 		spin_unlock_irq(&conf->device_lock);
 		
 		handled++;
@@ -3827,6 +3846,7 @@ static void raid5d(mddev_t *mddev)
 
 	spin_unlock_irq(&conf->device_lock);
 
+	async_tx_issue_pending_all();
 	unplug_slaves(mddev);
 
 	pr_debug("--- raid5d inactive\n");
@@ -4439,6 +4459,9 @@ static int raid5_check_reshape(mddev_t *mddev)
 		return -EINVAL; /* Cannot shrink array or change level yet */
 	if (mddev->delta_disks == 0)
 		return 0; /* nothing to do */
+	if (mddev->bitmap)
+		/* Cannot grow a bitmap yet */
+		return -EBUSY;
 
 	/* Can only proceed if there are plenty of stripe_heads.
 	 * We need a minimum of one full stripe,, and for sensible progress
diff --git a/drivers/media/common/saa7146_fops.c b/drivers/media/common/saa7146_fops.c
index 171afe7da6b6..cf6a817d5059 100644
--- a/drivers/media/common/saa7146_fops.c
+++ b/drivers/media/common/saa7146_fops.c
@@ -563,7 +563,7 @@ int saa7146_unregister_device(struct video_device **vid, struct saa7146_dev* dev
 
 	DEB_EE(("dev:%p\n",dev));
 
-	if( VFL_TYPE_GRABBER == (*vid)->type ) {
+	if ((*vid)->vfl_type == VFL_TYPE_GRABBER) {
 		vv->video_minor = -1;
 	} else {
 		vv->vbi_minor = -1;
diff --git a/drivers/media/common/saa7146_video.c b/drivers/media/common/saa7146_video.c
index a5e62750eea3..e8bc7abf2409 100644
--- a/drivers/media/common/saa7146_video.c
+++ b/drivers/media/common/saa7146_video.c
@@ -656,7 +656,7 @@ static int saa7146_pgtable_build(struct saa7146_dev *dev, struct saa7146_buf *bu
 
 		/* if we have a user buffer, the first page may not be
 		   aligned to a page boundary. */
-		pt1->offset = list->offset;
+		pt1->offset = dma->sglist->offset;
 		pt2->offset = pt1->offset+o1;
 		pt3->offset = pt1->offset+o2;
 
@@ -958,21 +958,18 @@ int saa7146_video_do_ioctl(struct inode *inode, struct file *file, unsigned int
 	case VIDIOC_ENUM_FMT:
 	{
 		struct v4l2_fmtdesc *f = arg;
-		int index;
 
 		switch (f->type) {
 		case V4L2_BUF_TYPE_VIDEO_CAPTURE:
-		case V4L2_BUF_TYPE_VIDEO_OVERLAY: {
-			index = f->index;
-			if (index < 0 || index >= NUM_FORMATS) {
+		case V4L2_BUF_TYPE_VIDEO_OVERLAY:
+			if (f->index >= NUM_FORMATS)
 				return -EINVAL;
-			}
-			memset(f,0,sizeof(*f));
-			f->index = index;
-			strlcpy((char *)f->description,formats[index].name,sizeof(f->description));
-			f->pixelformat = formats[index].pixelformat;
+			strlcpy((char *)f->description, formats[f->index].name,
+					sizeof(f->description));
+			f->pixelformat = formats[f->index].pixelformat;
+			f->flags = 0;
+			memset(f->reserved, 0, sizeof(f->reserved));
 			break;
-		}
 		default:
 			return -EINVAL;
 		}
diff --git a/drivers/media/common/tuners/Kconfig b/drivers/media/common/tuners/Kconfig
index 850d5689b14d..6f92beaa5ac8 100644
--- a/drivers/media/common/tuners/Kconfig
+++ b/drivers/media/common/tuners/Kconfig
@@ -21,9 +21,8 @@ config MEDIA_TUNER
 	tristate
 	default VIDEO_MEDIA && I2C
 	depends on VIDEO_MEDIA && I2C
-	select FW_LOADER if !MEDIA_TUNER_CUSTOMIZE && HOTPLUG
-	select MEDIA_TUNER_XC2028 if !MEDIA_TUNER_CUSTOMIZE && HOTPLUG
-	select MEDIA_TUNER_XC5000 if !MEDIA_TUNER_CUSTOMIZE && HOTPLUG
+	select MEDIA_TUNER_XC2028 if !MEDIA_TUNER_CUSTOMIZE
+	select MEDIA_TUNER_XC5000 if !MEDIA_TUNER_CUSTOMIZE
 	select MEDIA_TUNER_MT20XX if !MEDIA_TUNER_CUSTOMIZE
 	select MEDIA_TUNER_TDA8290 if !MEDIA_TUNER_CUSTOMIZE
 	select MEDIA_TUNER_TEA5761 if !MEDIA_TUNER_CUSTOMIZE
@@ -138,8 +137,6 @@ config MEDIA_TUNER_QT1010
 config MEDIA_TUNER_XC2028
 	tristate "XCeive xc2028/xc3028 tuners"
 	depends on VIDEO_MEDIA && I2C
-	depends on HOTPLUG
-	select FW_LOADER
 	default m if MEDIA_TUNER_CUSTOMIZE
 	help
 	  Say Y here to include support for the xc2028/xc3028 tuners.
@@ -147,8 +144,6 @@ config MEDIA_TUNER_XC2028
 config MEDIA_TUNER_XC5000
 	tristate "Xceive XC5000 silicon tuner"
 	depends on VIDEO_MEDIA && I2C
-	depends on HOTPLUG
-	select FW_LOADER
 	default m if DVB_FE_CUSTOMISE
 	help
 	  A driver for the silicon tuner XC5000 from Xceive.
@@ -162,4 +157,11 @@ config MEDIA_TUNER_MXL5005S
 	help
 	  A driver for the silicon tuner MXL5005S from MaxLinear.
 
+config MEDIA_TUNER_MXL5007T
+	tristate "MaxLinear MxL5007T silicon tuner"
+	depends on VIDEO_MEDIA && I2C
+	default m if DVB_FE_CUSTOMISE
+	help
+	  A driver for the silicon tuner MxL5007T from MaxLinear.
+
 endif # MEDIA_TUNER_CUSTOMIZE
diff --git a/drivers/media/common/tuners/Makefile b/drivers/media/common/tuners/Makefile
index 55f7e6706297..4dfbe5b8264f 100644
--- a/drivers/media/common/tuners/Makefile
+++ b/drivers/media/common/tuners/Makefile
@@ -21,6 +21,7 @@ obj-$(CONFIG_MEDIA_TUNER_MT2266) += mt2266.o
 obj-$(CONFIG_MEDIA_TUNER_QT1010) += qt1010.o
 obj-$(CONFIG_MEDIA_TUNER_MT2131) += mt2131.o
 obj-$(CONFIG_MEDIA_TUNER_MXL5005S) += mxl5005s.o
+obj-$(CONFIG_MEDIA_TUNER_MXL5007T) += mxl5007t.o
 
 EXTRA_CFLAGS += -Idrivers/media/dvb/dvb-core
 EXTRA_CFLAGS += -Idrivers/media/dvb/frontends
diff --git a/drivers/media/common/tuners/mt20xx.c b/drivers/media/common/tuners/mt20xx.c
index fbcb28233737..35b763a16d53 100644
--- a/drivers/media/common/tuners/mt20xx.c
+++ b/drivers/media/common/tuners/mt20xx.c
@@ -148,7 +148,8 @@ static int mt2032_compute_freq(struct dvb_frontend *fe,
 	tuner_dbg("mt2032: rfin=%d lo2=%d lo2n=%d lo2a=%d num=%d lo2freq=%d\n",
 		  rfin,lo2,lo2n,lo2a,lo2num,lo2freq);
 
-	if(lo1a<0 || lo1a>7 || lo1n<17 ||lo1n>48 || lo2a<0 ||lo2a >7 ||lo2n<17 || lo2n>30) {
+	if (lo1a > 7 || lo1n < 17 || lo1n > 48 || lo2a > 7 || lo2n < 17 ||
+			lo2n > 30) {
 		tuner_info("mt2032: frequency parameters out of range: %d %d %d %d\n",
 			   lo1a, lo1n, lo2a,lo2n);
 		return(-1);
diff --git a/drivers/media/common/tuners/mxl5007t.c b/drivers/media/common/tuners/mxl5007t.c
new file mode 100644
index 000000000000..cb25e43502fe
--- /dev/null
+++ b/drivers/media/common/tuners/mxl5007t.c
@@ -0,0 +1,1030 @@
+/*
+ *  mxl5007t.c - driver for the MaxLinear MxL5007T silicon tuner
+ *
+ *  Copyright (C) 2008 Michael Krufky <mkrufky@linuxtv.org>
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/i2c.h>
+#include <linux/types.h>
+#include <linux/videodev2.h>
+#include "tuner-i2c.h"
+#include "mxl5007t.h"
+
+static DEFINE_MUTEX(mxl5007t_list_mutex);
+static LIST_HEAD(hybrid_tuner_instance_list);
+
+static int mxl5007t_debug;
+module_param_named(debug, mxl5007t_debug, int, 0644);
+MODULE_PARM_DESC(debug, "set debug level");
+
+/* ------------------------------------------------------------------------- */
+
+#define mxl_printk(kern, fmt, arg...) \
+	printk(kern "%s: " fmt "\n", __func__, ##arg)
+
+#define mxl_err(fmt, arg...) \
+	mxl_printk(KERN_ERR, "%d: " fmt, __LINE__, ##arg)
+
+#define mxl_warn(fmt, arg...) \
+	mxl_printk(KERN_WARNING, fmt, ##arg)
+
+#define mxl_info(fmt, arg...) \
+	mxl_printk(KERN_INFO, fmt, ##arg)
+
+#define mxl_debug(fmt, arg...)				\
+({							\
+	if (mxl5007t_debug)				\
+		mxl_printk(KERN_DEBUG, fmt, ##arg);	\
+})
+
+#define mxl_fail(ret)							\
+({									\
+	int __ret;							\
+	__ret = (ret < 0);						\
+	if (__ret)							\
+		mxl_printk(KERN_ERR, "error %d on line %d",		\
+			   ret, __LINE__);				\
+	__ret;								\
+})
+
+/* ------------------------------------------------------------------------- */
+
+#define MHz 1000000
+
+enum mxl5007t_mode {
+	MxL_MODE_OTA_DVBT_ATSC        =    0,
+	MxL_MODE_OTA_NTSC_PAL_GH      =    1,
+	MxL_MODE_OTA_PAL_IB           =    2,
+	MxL_MODE_OTA_PAL_D_SECAM_KL   =    3,
+	MxL_MODE_OTA_ISDBT            =    4,
+	MxL_MODE_CABLE_DIGITAL        = 0x10,
+	MxL_MODE_CABLE_NTSC_PAL_GH    = 0x11,
+	MxL_MODE_CABLE_PAL_IB         = 0x12,
+	MxL_MODE_CABLE_PAL_D_SECAM_KL = 0x13,
+	MxL_MODE_CABLE_SCTE40         = 0x14,
+};
+
+enum mxl5007t_chip_version {
+	MxL_UNKNOWN_ID     = 0x00,
+	MxL_5007_V1_F1     = 0x11,
+	MxL_5007_V1_F2     = 0x12,
+	MxL_5007_V2_100_F1 = 0x21,
+	MxL_5007_V2_100_F2 = 0x22,
+	MxL_5007_V2_200_F1 = 0x23,
+	MxL_5007_V2_200_F2 = 0x24,
+};
+
+struct reg_pair_t {
+	u8 reg;
+	u8 val;
+};
+
+/* ------------------------------------------------------------------------- */
+
+static struct reg_pair_t init_tab[] = {
+	{ 0x0b, 0x44 }, /* XTAL */
+	{ 0x0c, 0x60 }, /* IF */
+	{ 0x10, 0x00 }, /* MISC */
+	{ 0x12, 0xca }, /* IDAC */
+	{ 0x16, 0x90 }, /* MODE */
+	{ 0x32, 0x38 }, /* MODE Analog/Digital */
+	{ 0xd8, 0x18 }, /* CLK_OUT_ENABLE */
+	{ 0x2c, 0x34 }, /* OVERRIDE */
+	{ 0x4d, 0x40 }, /* OVERRIDE */
+	{ 0x7f, 0x02 }, /* OVERRIDE */
+	{ 0x9a, 0x52 }, /* OVERRIDE */
+	{ 0x48, 0x5a }, /* OVERRIDE */
+	{ 0x76, 0x1a }, /* OVERRIDE */
+	{ 0x6a, 0x48 }, /* OVERRIDE */
+	{ 0x64, 0x28 }, /* OVERRIDE */
+	{ 0x66, 0xe6 }, /* OVERRIDE */
+	{ 0x35, 0x0e }, /* OVERRIDE */
+	{ 0x7e, 0x01 }, /* OVERRIDE */
+	{ 0x83, 0x00 }, /* OVERRIDE */
+	{ 0x04, 0x0b }, /* OVERRIDE */
+	{ 0x05, 0x01 }, /* TOP_MASTER_ENABLE */
+	{ 0, 0 }
+};
+
+static struct reg_pair_t init_tab_cable[] = {
+	{ 0x0b, 0x44 }, /* XTAL */
+	{ 0x0c, 0x60 }, /* IF */
+	{ 0x10, 0x00 }, /* MISC */
+	{ 0x12, 0xca }, /* IDAC */
+	{ 0x16, 0x90 }, /* MODE */
+	{ 0x32, 0x38 }, /* MODE A/D */
+	{ 0x71, 0x3f }, /* TOP1 */
+	{ 0x72, 0x3f }, /* TOP2 */
+	{ 0x74, 0x3f }, /* TOP3 */
+	{ 0xd8, 0x18 }, /* CLK_OUT_ENABLE */
+	{ 0x2c, 0x34 }, /* OVERRIDE */
+	{ 0x4d, 0x40 }, /* OVERRIDE */
+	{ 0x7f, 0x02 }, /* OVERRIDE */
+	{ 0x9a, 0x52 }, /* OVERRIDE */
+	{ 0x48, 0x5a }, /* OVERRIDE */
+	{ 0x76, 0x1a }, /* OVERRIDE */
+	{ 0x6a, 0x48 }, /* OVERRIDE */
+	{ 0x64, 0x28 }, /* OVERRIDE */
+	{ 0x66, 0xe6 }, /* OVERRIDE */
+	{ 0x35, 0x0e }, /* OVERRIDE */
+	{ 0x7e, 0x01 }, /* OVERRIDE */
+	{ 0x04, 0x0b }, /* OVERRIDE */
+	{ 0x68, 0xb4 }, /* OVERRIDE */
+	{ 0x36, 0x00 }, /* OVERRIDE */
+	{ 0x05, 0x01 }, /* TOP_MASTER_ENABLE */
+	{ 0, 0 }
+};
+
+/* ------------------------------------------------------------------------- */
+
+static struct reg_pair_t reg_pair_rftune[] = {
+	{ 0x11, 0x00 }, /* abort tune */
+	{ 0x13, 0x15 },
+	{ 0x14, 0x40 },
+	{ 0x15, 0x0e },
+	{ 0x11, 0x02 }, /* start tune */
+	{ 0, 0 }
+};
+
+/* ------------------------------------------------------------------------- */
+
+struct mxl5007t_state {
+	struct list_head hybrid_tuner_instance_list;
+	struct tuner_i2c_props i2c_props;
+
+	struct mutex lock;
+
+	struct mxl5007t_config *config;
+
+	enum mxl5007t_chip_version chip_id;
+
+	struct reg_pair_t tab_init[ARRAY_SIZE(init_tab)];
+	struct reg_pair_t tab_init_cable[ARRAY_SIZE(init_tab_cable)];
+	struct reg_pair_t tab_rftune[ARRAY_SIZE(reg_pair_rftune)];
+
+	u32 frequency;
+	u32 bandwidth;
+};
+
+/* ------------------------------------------------------------------------- */
+
+/* called by _init and _rftun to manipulate the register arrays */
+
+static void set_reg_bits(struct reg_pair_t *reg_pair, u8 reg, u8 mask, u8 val)
+{
+	unsigned int i = 0;
+
+	while (reg_pair[i].reg || reg_pair[i].val) {
+		if (reg_pair[i].reg == reg) {
+			reg_pair[i].val &= ~mask;
+			reg_pair[i].val |= val;
+		}
+		i++;
+
+	}
+	return;
+}
+
+static void copy_reg_bits(struct reg_pair_t *reg_pair1,
+			  struct reg_pair_t *reg_pair2)
+{
+	unsigned int i, j;
+
+	i = j = 0;
+
+	while (reg_pair1[i].reg || reg_pair1[i].val) {
+		while (reg_pair2[j].reg || reg_pair2[j].reg) {
+			if (reg_pair1[i].reg != reg_pair2[j].reg) {
+				j++;
+				continue;
+			}
+			reg_pair2[j].val = reg_pair1[i].val;
+			break;
+		}
+		i++;
+	}
+	return;
+}
+
+/* ------------------------------------------------------------------------- */
+
+static void mxl5007t_set_mode_bits(struct mxl5007t_state *state,
+				   enum mxl5007t_mode mode,
+				   s32 if_diff_out_level)
+{
+	switch (mode) {
+	case MxL_MODE_OTA_DVBT_ATSC:
+		set_reg_bits(state->tab_init, 0x32, 0x0f, 0x06);
+		set_reg_bits(state->tab_init, 0x35, 0xff, 0x0e);
+		break;
+	case MxL_MODE_OTA_ISDBT:
+		set_reg_bits(state->tab_init, 0x32, 0x0f, 0x06);
+		set_reg_bits(state->tab_init, 0x35, 0xff, 0x12);
+		break;
+	case MxL_MODE_OTA_NTSC_PAL_GH:
+		set_reg_bits(state->tab_init, 0x16, 0x70, 0x00);
+		set_reg_bits(state->tab_init, 0x32, 0xff, 0x85);
+		break;
+	case MxL_MODE_OTA_PAL_IB:
+		set_reg_bits(state->tab_init, 0x16, 0x70, 0x10);
+		set_reg_bits(state->tab_init, 0x32, 0xff, 0x85);
+		break;
+	case MxL_MODE_OTA_PAL_D_SECAM_KL:
+		set_reg_bits(state->tab_init, 0x16, 0x70, 0x20);
+		set_reg_bits(state->tab_init, 0x32, 0xff, 0x85);
+		break;
+	case MxL_MODE_CABLE_DIGITAL:
+		set_reg_bits(state->tab_init_cable, 0x71, 0xff, 0x01);
+		set_reg_bits(state->tab_init_cable, 0x72, 0xff,
+			     8 - if_diff_out_level);
+		set_reg_bits(state->tab_init_cable, 0x74, 0xff, 0x17);
+		break;
+	case MxL_MODE_CABLE_NTSC_PAL_GH:
+		set_reg_bits(state->tab_init, 0x16, 0x70, 0x00);
+		set_reg_bits(state->tab_init, 0x32, 0xff, 0x85);
+		set_reg_bits(state->tab_init_cable, 0x71, 0xff, 0x01);
+		set_reg_bits(state->tab_init_cable, 0x72, 0xff,
+			     8 - if_diff_out_level);
+		set_reg_bits(state->tab_init_cable, 0x74, 0xff, 0x17);
+		break;
+	case MxL_MODE_CABLE_PAL_IB:
+		set_reg_bits(state->tab_init, 0x16, 0x70, 0x10);
+		set_reg_bits(state->tab_init, 0x32, 0xff, 0x85);
+		set_reg_bits(state->tab_init_cable, 0x71, 0xff, 0x01);
+		set_reg_bits(state->tab_init_cable, 0x72, 0xff,
+			     8 - if_diff_out_level);
+		set_reg_bits(state->tab_init_cable, 0x74, 0xff, 0x17);
+		break;
+	case MxL_MODE_CABLE_PAL_D_SECAM_KL:
+		set_reg_bits(state->tab_init, 0x16, 0x70, 0x20);
+		set_reg_bits(state->tab_init, 0x32, 0xff, 0x85);
+		set_reg_bits(state->tab_init_cable, 0x71, 0xff, 0x01);
+		set_reg_bits(state->tab_init_cable, 0x72, 0xff,
+			     8 - if_diff_out_level);
+		set_reg_bits(state->tab_init_cable, 0x74, 0xff, 0x17);
+		break;
+	case MxL_MODE_CABLE_SCTE40:
+		set_reg_bits(state->tab_init_cable, 0x36, 0xff, 0x08);
+		set_reg_bits(state->tab_init_cable, 0x68, 0xff, 0xbc);
+		set_reg_bits(state->tab_init_cable, 0x71, 0xff, 0x01);
+		set_reg_bits(state->tab_init_cable, 0x72, 0xff,
+			     8 - if_diff_out_level);
+		set_reg_bits(state->tab_init_cable, 0x74, 0xff, 0x17);
+		break;
+	default:
+		mxl_fail(-EINVAL);
+	}
+	return;
+}
+
+static void mxl5007t_set_if_freq_bits(struct mxl5007t_state *state,
+				      enum mxl5007t_if_freq if_freq,
+				      int invert_if)
+{
+	u8 val;
+
+	switch (if_freq) {
+	case MxL_IF_4_MHZ:
+		val = 0x00;
+		break;
+	case MxL_IF_4_5_MHZ:
+		val = 0x20;
+		break;
+	case MxL_IF_4_57_MHZ:
+		val = 0x30;
+		break;
+	case MxL_IF_5_MHZ:
+		val = 0x40;
+		break;
+	case MxL_IF_5_38_MHZ:
+		val = 0x50;
+		break;
+	case MxL_IF_6_MHZ:
+		val = 0x60;
+		break;
+	case MxL_IF_6_28_MHZ:
+		val = 0x70;
+		break;
+	case MxL_IF_9_1915_MHZ:
+		val = 0x80;
+		break;
+	case MxL_IF_35_25_MHZ:
+		val = 0x90;
+		break;
+	case MxL_IF_36_15_MHZ:
+		val = 0xa0;
+		break;
+	case MxL_IF_44_MHZ:
+		val = 0xb0;
+		break;
+	default:
+		mxl_fail(-EINVAL);
+		return;
+	}
+	set_reg_bits(state->tab_init, 0x0c, 0xf0, val);
+
+	/* set inverted IF or normal IF */
+	set_reg_bits(state->tab_init, 0x0c, 0x08, invert_if ? 0x08 : 0x00);
+
+	return;
+}
+
+static void mxl5007t_set_xtal_freq_bits(struct mxl5007t_state *state,
+					enum mxl5007t_xtal_freq xtal_freq)
+{
+	u8 val;
+
+	switch (xtal_freq) {
+	case MxL_XTAL_16_MHZ:
+		val = 0x00; /* select xtal freq & Ref Freq */
+		break;
+	case MxL_XTAL_20_MHZ:
+		val = 0x11;
+		break;
+	case MxL_XTAL_20_25_MHZ:
+		val = 0x22;
+		break;
+	case MxL_XTAL_20_48_MHZ:
+		val = 0x33;
+		break;
+	case MxL_XTAL_24_MHZ:
+		val = 0x44;
+		break;
+	case MxL_XTAL_25_MHZ:
+		val = 0x55;
+		break;
+	case MxL_XTAL_25_14_MHZ:
+		val = 0x66;
+		break;
+	case MxL_XTAL_27_MHZ:
+		val = 0x77;
+		break;
+	case MxL_XTAL_28_8_MHZ:
+		val = 0x88;
+		break;
+	case MxL_XTAL_32_MHZ:
+		val = 0x99;
+		break;
+	case MxL_XTAL_40_MHZ:
+		val = 0xaa;
+		break;
+	case MxL_XTAL_44_MHZ:
+		val = 0xbb;
+		break;
+	case MxL_XTAL_48_MHZ:
+		val = 0xcc;
+		break;
+	case MxL_XTAL_49_3811_MHZ:
+		val = 0xdd;
+		break;
+	default:
+		mxl_fail(-EINVAL);
+		return;
+	}
+	set_reg_bits(state->tab_init, 0x0b, 0xff, val);
+
+	return;
+}
+
+static struct reg_pair_t *mxl5007t_calc_init_regs(struct mxl5007t_state *state,
+						  enum mxl5007t_mode mode)
+{
+	struct mxl5007t_config *cfg = state->config;
+
+	memcpy(&state->tab_init, &init_tab, sizeof(init_tab));
+	memcpy(&state->tab_init_cable, &init_tab_cable, sizeof(init_tab_cable));
+
+	mxl5007t_set_mode_bits(state, mode, cfg->if_diff_out_level);
+	mxl5007t_set_if_freq_bits(state, cfg->if_freq_hz, cfg->invert_if);
+	mxl5007t_set_xtal_freq_bits(state, cfg->xtal_freq_hz);
+
+	set_reg_bits(state->tab_init, 0x10, 0x40, cfg->loop_thru_enable << 6);
+
+	set_reg_bits(state->tab_init, 0xd8, 0x08, cfg->clk_out_enable << 3);
+
+	set_reg_bits(state->tab_init, 0x10, 0x07, cfg->clk_out_amp);
+
+	/* set IDAC to automatic mode control by AGC */
+	set_reg_bits(state->tab_init, 0x12, 0x80, 0x00);
+
+	if (mode >= MxL_MODE_CABLE_DIGITAL) {
+		copy_reg_bits(state->tab_init, state->tab_init_cable);
+		return state->tab_init_cable;
+	} else
+		return state->tab_init;
+}
+
+/* ------------------------------------------------------------------------- */
+
+enum mxl5007t_bw_mhz {
+	MxL_BW_6MHz = 6,
+	MxL_BW_7MHz = 7,
+	MxL_BW_8MHz = 8,
+};
+
+static void mxl5007t_set_bw_bits(struct mxl5007t_state *state,
+				 enum mxl5007t_bw_mhz bw)
+{
+	u8 val;
+
+	switch (bw) {
+	case MxL_BW_6MHz:
+		val = 0x15; /* set DIG_MODEINDEX, DIG_MODEINDEX_A,
+			     * and DIG_MODEINDEX_CSF */
+		break;
+	case MxL_BW_7MHz:
+		val = 0x21;
+		break;
+	case MxL_BW_8MHz:
+		val = 0x3f;
+		break;
+	default:
+		mxl_fail(-EINVAL);
+		return;
+	}
+	set_reg_bits(state->tab_rftune, 0x13, 0x3f, val);
+
+	return;
+}
+
+static struct
+reg_pair_t *mxl5007t_calc_rf_tune_regs(struct mxl5007t_state *state,
+				       u32 rf_freq, enum mxl5007t_bw_mhz bw)
+{
+	u32 dig_rf_freq = 0;
+	u32 temp;
+	u32 frac_divider = 1000000;
+	unsigned int i;
+
+	memcpy(&state->tab_rftune, &reg_pair_rftune, sizeof(reg_pair_rftune));
+
+	mxl5007t_set_bw_bits(state, bw);
+
+	/* Convert RF frequency into 16 bits =>
+	 * 10 bit integer (MHz) + 6 bit fraction */
+	dig_rf_freq = rf_freq / MHz;
+
+	temp = rf_freq % MHz;
+
+	for (i = 0; i < 6; i++) {
+		dig_rf_freq <<= 1;
+		frac_divider /= 2;
+		if (temp > frac_divider) {
+			temp -= frac_divider;
+			dig_rf_freq++;
+		}
+	}
+
+	/* add to have shift center point by 7.8124 kHz */
+	if (temp > 7812)
+		dig_rf_freq++;
+
+	set_reg_bits(state->tab_rftune, 0x14, 0xff, (u8)dig_rf_freq);
+	set_reg_bits(state->tab_rftune, 0x15, 0xff, (u8)(dig_rf_freq >> 8));
+
+	return state->tab_rftune;
+}
+
+/* ------------------------------------------------------------------------- */
+
+static int mxl5007t_write_reg(struct mxl5007t_state *state, u8 reg, u8 val)
+{
+	u8 buf[] = { reg, val };
+	struct i2c_msg msg = { .addr = state->i2c_props.addr, .flags = 0,
+			       .buf = buf, .len = 2 };
+	int ret;
+
+	ret = i2c_transfer(state->i2c_props.adap, &msg, 1);
+	if (ret != 1) {
+		mxl_err("failed!");
+		return -EREMOTEIO;
+	}
+	return 0;
+}
+
+static int mxl5007t_write_regs(struct mxl5007t_state *state,
+			       struct reg_pair_t *reg_pair)
+{
+	unsigned int i = 0;
+	int ret = 0;
+
+	while ((ret == 0) && (reg_pair[i].reg || reg_pair[i].val)) {
+		ret = mxl5007t_write_reg(state,
+					 reg_pair[i].reg, reg_pair[i].val);
+		i++;
+	}
+	return ret;
+}
+
+static int mxl5007t_read_reg(struct mxl5007t_state *state, u8 reg, u8 *val)
+{
+	struct i2c_msg msg[] = {
+		{ .addr = state->i2c_props.addr, .flags = 0,
+		  .buf = &reg, .len = 1 },
+		{ .addr = state->i2c_props.addr, .flags = I2C_M_RD,
+		  .buf = val, .len = 1 },
+	};
+	int ret;
+
+	ret = i2c_transfer(state->i2c_props.adap, msg, 2);
+	if (ret != 2) {
+		mxl_err("failed!");
+		return -EREMOTEIO;
+	}
+	return 0;
+}
+
+static int mxl5007t_soft_reset(struct mxl5007t_state *state)
+{
+	u8 d = 0xff;
+	struct i2c_msg msg = { .addr = state->i2c_props.addr, .flags = 0,
+			       .buf = &d, .len = 1 };
+
+	int ret = i2c_transfer(state->i2c_props.adap, &msg, 1);
+
+	if (ret != 1) {
+		mxl_err("failed!");
+		return -EREMOTEIO;
+	}
+	return 0;
+}
+
+static int mxl5007t_tuner_init(struct mxl5007t_state *state,
+			       enum mxl5007t_mode mode)
+{
+	struct reg_pair_t *init_regs;
+	int ret;
+
+	ret = mxl5007t_soft_reset(state);
+	if (mxl_fail(ret))
+		goto fail;
+
+	/* calculate initialization reg array */
+	init_regs = mxl5007t_calc_init_regs(state, mode);
+
+	ret = mxl5007t_write_regs(state, init_regs);
+	if (mxl_fail(ret))
+		goto fail;
+	mdelay(1);
+
+	ret = mxl5007t_write_reg(state, 0x2c, 0x35);
+	mxl_fail(ret);
+fail:
+	return ret;
+}
+
+static int mxl5007t_tuner_rf_tune(struct mxl5007t_state *state, u32 rf_freq_hz,
+				  enum mxl5007t_bw_mhz bw)
+{
+	struct reg_pair_t *rf_tune_regs;
+	int ret;
+
+	/* calculate channel change reg array */
+	rf_tune_regs = mxl5007t_calc_rf_tune_regs(state, rf_freq_hz, bw);
+
+	ret = mxl5007t_write_regs(state, rf_tune_regs);
+	if (mxl_fail(ret))
+		goto fail;
+	msleep(3);
+fail:
+	return ret;
+}
+
+/* ------------------------------------------------------------------------- */
+
+static int mxl5007t_synth_lock_status(struct mxl5007t_state *state,
+				      int *rf_locked, int *ref_locked)
+{
+	u8 d;
+	int ret;
+
+	*rf_locked = 0;
+	*ref_locked = 0;
+
+	ret = mxl5007t_read_reg(state, 0xcf, &d);
+	if (mxl_fail(ret))
+		goto fail;
+
+	if ((d & 0x0c) == 0x0c)
+		*rf_locked = 1;
+
+	if ((d & 0x03) == 0x03)
+		*ref_locked = 1;
+fail:
+	return ret;
+}
+
+static int mxl5007t_check_rf_input_power(struct mxl5007t_state *state,
+					 s32 *rf_input_level)
+{
+	u8 d1, d2;
+	int ret;
+
+	ret = mxl5007t_read_reg(state, 0xb7, &d1);
+	if (mxl_fail(ret))
+		goto fail;
+
+	ret = mxl5007t_read_reg(state, 0xbf, &d2);
+	if (mxl_fail(ret))
+		goto fail;
+
+	d2 = d2 >> 4;
+	if (d2 > 7)
+		d2 += 0xf0;
+
+	*rf_input_level = (s32)(d1 + d2 - 113);
+fail:
+	return ret;
+}
+
+/* ------------------------------------------------------------------------- */
+
+static int mxl5007t_get_status(struct dvb_frontend *fe, u32 *status)
+{
+	struct mxl5007t_state *state = fe->tuner_priv;
+	int rf_locked, ref_locked;
+	s32 rf_input_level;
+	int ret;
+
+	if (fe->ops.i2c_gate_ctrl)
+		fe->ops.i2c_gate_ctrl(fe, 1);
+
+	ret = mxl5007t_synth_lock_status(state, &rf_locked, &ref_locked);
+	if (mxl_fail(ret))
+		goto fail;
+	mxl_debug("%s%s", rf_locked ? "rf locked " : "",
+		  ref_locked ? "ref locked" : "");
+
+	ret = mxl5007t_check_rf_input_power(state, &rf_input_level);
+	if (mxl_fail(ret))
+		goto fail;
+	mxl_debug("rf input power: %d", rf_input_level);
+fail:
+	if (fe->ops.i2c_gate_ctrl)
+		fe->ops.i2c_gate_ctrl(fe, 0);
+
+	return ret;
+}
+
+/* ------------------------------------------------------------------------- */
+
+static int mxl5007t_set_params(struct dvb_frontend *fe,
+			       struct dvb_frontend_parameters *params)
+{
+	struct mxl5007t_state *state = fe->tuner_priv;
+	enum mxl5007t_bw_mhz bw;
+	enum mxl5007t_mode mode;
+	int ret;
+	u32 freq = params->frequency;
+
+	if (fe->ops.info.type == FE_ATSC) {
+		switch (params->u.vsb.modulation) {
+		case VSB_8:
+		case VSB_16:
+			mode = MxL_MODE_OTA_DVBT_ATSC;
+			break;
+		case QAM_64:
+		case QAM_256:
+			mode = MxL_MODE_CABLE_DIGITAL;
+			break;
+		default:
+			mxl_err("modulation not set!");
+			return -EINVAL;
+		}
+		bw = MxL_BW_6MHz;
+	} else if (fe->ops.info.type == FE_OFDM) {
+		switch (params->u.ofdm.bandwidth) {
+		case BANDWIDTH_6_MHZ:
+			bw = MxL_BW_6MHz;
+			break;
+		case BANDWIDTH_7_MHZ:
+			bw = MxL_BW_7MHz;
+			break;
+		case BANDWIDTH_8_MHZ:
+			bw = MxL_BW_8MHz;
+			break;
+		default:
+			mxl_err("bandwidth not set!");
+			return -EINVAL;
+		}
+		mode = MxL_MODE_OTA_DVBT_ATSC;
+	} else {
+		mxl_err("modulation type not supported!");
+		return -EINVAL;
+	}
+
+	if (fe->ops.i2c_gate_ctrl)
+		fe->ops.i2c_gate_ctrl(fe, 1);
+
+	mutex_lock(&state->lock);
+
+	ret = mxl5007t_tuner_init(state, mode);
+	if (mxl_fail(ret))
+		goto fail;
+
+	ret = mxl5007t_tuner_rf_tune(state, freq, bw);
+	if (mxl_fail(ret))
+		goto fail;
+
+	state->frequency = freq;
+	state->bandwidth = (fe->ops.info.type == FE_OFDM) ?
+		params->u.ofdm.bandwidth : 0;
+fail:
+	mutex_unlock(&state->lock);
+
+	if (fe->ops.i2c_gate_ctrl)
+		fe->ops.i2c_gate_ctrl(fe, 0);
+
+	return ret;
+}
+
+static int mxl5007t_set_analog_params(struct dvb_frontend *fe,
+				      struct analog_parameters *params)
+{
+	struct mxl5007t_state *state = fe->tuner_priv;
+	enum mxl5007t_bw_mhz bw = 0; /* FIXME */
+	enum mxl5007t_mode cbl_mode;
+	enum mxl5007t_mode ota_mode;
+	char *mode_name;
+	int ret;
+	u32 freq = params->frequency * 62500;
+
+#define cable 1
+	if (params->std & V4L2_STD_MN) {
+		cbl_mode = MxL_MODE_CABLE_NTSC_PAL_GH;
+		ota_mode = MxL_MODE_OTA_NTSC_PAL_GH;
+		mode_name = "MN";
+	} else if (params->std & V4L2_STD_B) {
+		cbl_mode = MxL_MODE_CABLE_PAL_IB;
+		ota_mode = MxL_MODE_OTA_PAL_IB;
+		mode_name = "B";
+	} else if (params->std & V4L2_STD_GH) {
+		cbl_mode = MxL_MODE_CABLE_NTSC_PAL_GH;
+		ota_mode = MxL_MODE_OTA_NTSC_PAL_GH;
+		mode_name = "GH";
+	} else if (params->std & V4L2_STD_PAL_I) {
+		cbl_mode = MxL_MODE_CABLE_PAL_IB;
+		ota_mode = MxL_MODE_OTA_PAL_IB;
+		mode_name = "I";
+	} else if (params->std & V4L2_STD_DK) {
+		cbl_mode = MxL_MODE_CABLE_PAL_D_SECAM_KL;
+		ota_mode = MxL_MODE_OTA_PAL_D_SECAM_KL;
+		mode_name = "DK";
+	} else if (params->std & V4L2_STD_SECAM_L) {
+		cbl_mode = MxL_MODE_CABLE_PAL_D_SECAM_KL;
+		ota_mode = MxL_MODE_OTA_PAL_D_SECAM_KL;
+		mode_name = "L";
+	} else if (params->std & V4L2_STD_SECAM_LC) {
+		cbl_mode = MxL_MODE_CABLE_PAL_D_SECAM_KL;
+		ota_mode = MxL_MODE_OTA_PAL_D_SECAM_KL;
+		mode_name = "L'";
+	} else {
+		mode_name = "xx";
+		/* FIXME */
+		cbl_mode = MxL_MODE_CABLE_NTSC_PAL_GH;
+		ota_mode = MxL_MODE_OTA_NTSC_PAL_GH;
+	}
+	mxl_debug("setting mxl5007 to system %s", mode_name);
+
+	if (fe->ops.i2c_gate_ctrl)
+		fe->ops.i2c_gate_ctrl(fe, 1);
+
+	mutex_lock(&state->lock);
+
+	ret = mxl5007t_tuner_init(state, cable ? cbl_mode : ota_mode);
+	if (mxl_fail(ret))
+		goto fail;
+
+	ret = mxl5007t_tuner_rf_tune(state, freq, bw);
+	if (mxl_fail(ret))
+		goto fail;
+
+	state->frequency = freq;
+	state->bandwidth = 0;
+fail:
+	mutex_unlock(&state->lock);
+
+	if (fe->ops.i2c_gate_ctrl)
+		fe->ops.i2c_gate_ctrl(fe, 0);
+
+	return ret;
+}
+
+/* ------------------------------------------------------------------------- */
+
+static int mxl5007t_init(struct dvb_frontend *fe)
+{
+	struct mxl5007t_state *state = fe->tuner_priv;
+	int ret;
+	u8 d;
+
+	if (fe->ops.i2c_gate_ctrl)
+		fe->ops.i2c_gate_ctrl(fe, 1);
+
+	ret = mxl5007t_read_reg(state, 0x05, &d);
+	if (mxl_fail(ret))
+		goto fail;
+
+	ret = mxl5007t_write_reg(state, 0x05, d | 0x01);
+	mxl_fail(ret);
+fail:
+	if (fe->ops.i2c_gate_ctrl)
+		fe->ops.i2c_gate_ctrl(fe, 0);
+
+	return ret;
+}
+
+static int mxl5007t_sleep(struct dvb_frontend *fe)
+{
+	struct mxl5007t_state *state = fe->tuner_priv;
+	int ret;
+	u8 d;
+
+	if (fe->ops.i2c_gate_ctrl)
+		fe->ops.i2c_gate_ctrl(fe, 1);
+
+	ret = mxl5007t_read_reg(state, 0x05, &d);
+	if (mxl_fail(ret))
+		goto fail;
+
+	ret = mxl5007t_write_reg(state, 0x05, d & ~0x01);
+	mxl_fail(ret);
+fail:
+	if (fe->ops.i2c_gate_ctrl)
+		fe->ops.i2c_gate_ctrl(fe, 0);
+
+	return ret;
+}
+
+/* ------------------------------------------------------------------------- */
+
+static int mxl5007t_get_frequency(struct dvb_frontend *fe, u32 *frequency)
+{
+	struct mxl5007t_state *state = fe->tuner_priv;
+	*frequency = state->frequency;
+	return 0;
+}
+
+static int mxl5007t_get_bandwidth(struct dvb_frontend *fe, u32 *bandwidth)
+{
+	struct mxl5007t_state *state = fe->tuner_priv;
+	*bandwidth = state->bandwidth;
+	return 0;
+}
+
+static int mxl5007t_release(struct dvb_frontend *fe)
+{
+	struct mxl5007t_state *state = fe->tuner_priv;
+
+	mutex_lock(&mxl5007t_list_mutex);
+
+	if (state)
+		hybrid_tuner_release_state(state);
+
+	mutex_unlock(&mxl5007t_list_mutex);
+
+	fe->tuner_priv = NULL;
+
+	return 0;
+}
+
+/* ------------------------------------------------------------------------- */
+
+static struct dvb_tuner_ops mxl5007t_tuner_ops = {
+	.info = {
+		.name = "MaxLinear MxL5007T",
+	},
+	.init              = mxl5007t_init,
+	.sleep             = mxl5007t_sleep,
+	.set_params        = mxl5007t_set_params,
+	.set_analog_params = mxl5007t_set_analog_params,
+	.get_status        = mxl5007t_get_status,
+	.get_frequency     = mxl5007t_get_frequency,
+	.get_bandwidth     = mxl5007t_get_bandwidth,
+	.release           = mxl5007t_release,
+};
+
+static int mxl5007t_get_chip_id(struct mxl5007t_state *state)
+{
+	char *name;
+	int ret;
+	u8 id;
+
+	ret = mxl5007t_read_reg(state, 0xd3, &id);
+	if (mxl_fail(ret))
+		goto fail;
+
+	switch (id) {
+	case MxL_5007_V1_F1:
+		name = "MxL5007.v1.f1";
+		break;
+	case MxL_5007_V1_F2:
+		name = "MxL5007.v1.f2";
+		break;
+	case MxL_5007_V2_100_F1:
+		name = "MxL5007.v2.100.f1";
+		break;
+	case MxL_5007_V2_100_F2:
+		name = "MxL5007.v2.100.f2";
+		break;
+	case MxL_5007_V2_200_F1:
+		name = "MxL5007.v2.200.f1";
+		break;
+	case MxL_5007_V2_200_F2:
+		name = "MxL5007.v2.200.f2";
+		break;
+	default:
+		name = "MxL5007T";
+		id = MxL_UNKNOWN_ID;
+	}
+	state->chip_id = id;
+	mxl_info("%s detected @ %d-%04x", name,
+		 i2c_adapter_id(state->i2c_props.adap),
+		 state->i2c_props.addr);
+	return 0;
+fail:
+	mxl_warn("unable to identify device @ %d-%04x",
+		 i2c_adapter_id(state->i2c_props.adap),
+		 state->i2c_props.addr);
+
+	state->chip_id = MxL_UNKNOWN_ID;
+	return ret;
+}
+
+struct dvb_frontend *mxl5007t_attach(struct dvb_frontend *fe,
+				     struct i2c_adapter *i2c, u8 addr,
+				     struct mxl5007t_config *cfg)
+{
+	struct mxl5007t_state *state = NULL;
+	int instance, ret;
+
+	mutex_lock(&mxl5007t_list_mutex);
+	instance = hybrid_tuner_request_state(struct mxl5007t_state, state,
+					      hybrid_tuner_instance_list,
+					      i2c, addr, "mxl5007");
+	switch (instance) {
+	case 0:
+		goto fail;
+		break;
+	case 1:
+		/* new tuner instance */
+		state->config = cfg;
+
+		mutex_init(&state->lock);
+
+		if (fe->ops.i2c_gate_ctrl)
+			fe->ops.i2c_gate_ctrl(fe, 1);
+
+		ret = mxl5007t_get_chip_id(state);
+
+		if (fe->ops.i2c_gate_ctrl)
+			fe->ops.i2c_gate_ctrl(fe, 0);
+
+		/* check return value of mxl5007t_get_chip_id */
+		if (mxl_fail(ret))
+			goto fail;
+		break;
+	default:
+		/* existing tuner instance */
+		break;
+	}
+	fe->tuner_priv = state;
+	mutex_unlock(&mxl5007t_list_mutex);
+
+	memcpy(&fe->ops.tuner_ops, &mxl5007t_tuner_ops,
+	       sizeof(struct dvb_tuner_ops));
+
+	return fe;
+fail:
+	mutex_unlock(&mxl5007t_list_mutex);
+
+	mxl5007t_release(fe);
+	return NULL;
+}
+EXPORT_SYMBOL_GPL(mxl5007t_attach);
+MODULE_DESCRIPTION("MaxLinear MxL5007T Silicon IC tuner driver");
+MODULE_AUTHOR("Michael Krufky <mkrufky@linuxtv.org>");
+MODULE_LICENSE("GPL");
+MODULE_VERSION("0.1");
+
+/*
+ * Overrides for Emacs so that we follow Linus's tabbing style.
+ * ---------------------------------------------------------------------------
+ * Local variables:
+ * c-basic-offset: 8
+ * End:
+ */
diff --git a/drivers/media/common/tuners/mxl5007t.h b/drivers/media/common/tuners/mxl5007t.h
new file mode 100644
index 000000000000..aa3eea0b5262
--- /dev/null
+++ b/drivers/media/common/tuners/mxl5007t.h
@@ -0,0 +1,104 @@
+/*
+ *  mxl5007t.h - driver for the MaxLinear MxL5007T silicon tuner
+ *
+ *  Copyright (C) 2008 Michael Krufky <mkrufky@linuxtv.org>
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef __MXL5007T_H__
+#define __MXL5007T_H__
+
+#include "dvb_frontend.h"
+
+/* ------------------------------------------------------------------------- */
+
+enum mxl5007t_if_freq {
+	MxL_IF_4_MHZ,      /*  4000000 */
+	MxL_IF_4_5_MHZ,    /*  4500000 */
+	MxL_IF_4_57_MHZ,   /*  4570000 */
+	MxL_IF_5_MHZ,      /*  5000000 */
+	MxL_IF_5_38_MHZ,   /*  5380000 */
+	MxL_IF_6_MHZ,      /*  6000000 */
+	MxL_IF_6_28_MHZ,   /*  6280000 */
+	MxL_IF_9_1915_MHZ, /*  9191500 */
+	MxL_IF_35_25_MHZ,  /* 35250000 */
+	MxL_IF_36_15_MHZ,  /* 36150000 */
+	MxL_IF_44_MHZ,     /* 44000000 */
+};
+
+enum mxl5007t_xtal_freq {
+	MxL_XTAL_16_MHZ,      /* 16000000 */
+	MxL_XTAL_20_MHZ,      /* 20000000 */
+	MxL_XTAL_20_25_MHZ,   /* 20250000 */
+	MxL_XTAL_20_48_MHZ,   /* 20480000 */
+	MxL_XTAL_24_MHZ,      /* 24000000 */
+	MxL_XTAL_25_MHZ,      /* 25000000 */
+	MxL_XTAL_25_14_MHZ,   /* 25140000 */
+	MxL_XTAL_27_MHZ,      /* 27000000 */
+	MxL_XTAL_28_8_MHZ,    /* 28800000 */
+	MxL_XTAL_32_MHZ,      /* 32000000 */
+	MxL_XTAL_40_MHZ,      /* 40000000 */
+	MxL_XTAL_44_MHZ,      /* 44000000 */
+	MxL_XTAL_48_MHZ,      /* 48000000 */
+	MxL_XTAL_49_3811_MHZ, /* 49381100 */
+};
+
+enum mxl5007t_clkout_amp {
+	MxL_CLKOUT_AMP_0_94V = 0,
+	MxL_CLKOUT_AMP_0_53V = 1,
+	MxL_CLKOUT_AMP_0_37V = 2,
+	MxL_CLKOUT_AMP_0_28V = 3,
+	MxL_CLKOUT_AMP_0_23V = 4,
+	MxL_CLKOUT_AMP_0_20V = 5,
+	MxL_CLKOUT_AMP_0_17V = 6,
+	MxL_CLKOUT_AMP_0_15V = 7,
+};
+
+struct mxl5007t_config {
+	s32 if_diff_out_level;
+	enum mxl5007t_clkout_amp clk_out_amp;
+	enum mxl5007t_xtal_freq xtal_freq_hz;
+	enum mxl5007t_if_freq if_freq_hz;
+	unsigned int invert_if:1;
+	unsigned int loop_thru_enable:1;
+	unsigned int clk_out_enable:1;
+};
+
+#if defined(CONFIG_MEDIA_TUNER_MXL5007T) || (defined(CONFIG_MEDIA_TUNER_MXL5007T_MODULE) && defined(MODULE))
+extern struct dvb_frontend *mxl5007t_attach(struct dvb_frontend *fe,
+					    struct i2c_adapter *i2c, u8 addr,
+					    struct mxl5007t_config *cfg);
+#else
+static inline struct dvb_frontend *mxl5007t_attach(struct dvb_frontend *fe,
+						   struct i2c_adapter *i2c,
+						   u8 addr,
+						   struct mxl5007t_config *cfg)
+{
+	printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
+	return NULL;
+}
+#endif
+
+#endif /* __MXL5007T_H__ */
+
+/*
+ * Overrides for Emacs so that we follow Linus's tabbing style.
+ * ---------------------------------------------------------------------------
+ * Local variables:
+ * c-basic-offset: 8
+ * End:
+ */
+
diff --git a/drivers/media/common/tuners/tda9887.c b/drivers/media/common/tuners/tda9887.c
index a0545ba957b0..72abf0b73486 100644
--- a/drivers/media/common/tuners/tda9887.c
+++ b/drivers/media/common/tuners/tda9887.c
@@ -6,7 +6,7 @@
 #include <linux/errno.h>
 #include <linux/slab.h>
 #include <linux/delay.h>
-#include <linux/videodev.h>
+#include <linux/videodev2.h>
 #include <media/v4l2-common.h>
 #include <media/tuner.h>
 #include "tuner-i2c.h"
diff --git a/drivers/media/common/tuners/tuner-simple.c b/drivers/media/common/tuners/tuner-simple.c
index 266c255cf0d8..597e47f5d69c 100644
--- a/drivers/media/common/tuners/tuner-simple.c
+++ b/drivers/media/common/tuners/tuner-simple.c
@@ -6,7 +6,7 @@
  */
 #include <linux/delay.h>
 #include <linux/i2c.h>
-#include <linux/videodev.h>
+#include <linux/videodev2.h>
 #include <media/tuner.h>
 #include <media/v4l2-common.h>
 #include <media/tuner-types.h>
diff --git a/drivers/media/dvb/bt8xx/Kconfig b/drivers/media/dvb/bt8xx/Kconfig
index 7588db1319d0..7e9c090fc04e 100644
--- a/drivers/media/dvb/bt8xx/Kconfig
+++ b/drivers/media/dvb/bt8xx/Kconfig
@@ -1,7 +1,6 @@
 config DVB_BT8XX
 	tristate "BT8xx based PCI cards"
 	depends on DVB_CORE && PCI && I2C && VIDEO_BT848
-	depends on HOTPLUG	# due to FW_LOADER
 	select DVB_MT352 if !DVB_FE_CUSTOMISE
 	select DVB_SP887X if !DVB_FE_CUSTOMISE
 	select DVB_NXT6000 if !DVB_FE_CUSTOMISE
@@ -10,7 +9,6 @@ config DVB_BT8XX
 	select DVB_LGDT330X if !DVB_FE_CUSTOMISE
 	select DVB_ZL10353 if !DVB_FE_CUSTOMISE
 	select MEDIA_TUNER_SIMPLE if !DVB_FE_CUSTOMISE
-	select FW_LOADER
 	help
 	  Support for PCI cards based on the Bt8xx PCI bridge. Examples are
 	  the Nebula cards, the Pinnacle PCTV cards, the Twinhan DST cards,
diff --git a/drivers/media/dvb/dvb-usb/Kconfig b/drivers/media/dvb/dvb-usb/Kconfig
index a577c0f89f67..e84152b7576d 100644
--- a/drivers/media/dvb/dvb-usb/Kconfig
+++ b/drivers/media/dvb/dvb-usb/Kconfig
@@ -1,8 +1,6 @@
 config DVB_USB
 	tristate "Support for various USB DVB devices"
 	depends on DVB_CORE && USB && I2C && INPUT
-	depends on HOTPLUG	# due to FW_LOADER
-	select FW_LOADER
 	help
 	  By enabling this you will be able to choose the various supported
 	  USB1.1 and USB2.0 DVB devices.
@@ -246,6 +244,14 @@ config DVB_USB_AF9005_REMOTE
 	  Say Y here to support the default remote control decoding for the
 	  Afatech AF9005 based receiver.
 
+config DVB_USB_DW2102
+	tristate "DvbWorld 2102 DVB-S USB2.0 receiver"
+	depends on DVB_USB
+	select DVB_STV0299 if !DVB_FE_CUSTOMISE
+	select DVB_PLL if !DVB_FE_CUSTOMISE
+	help
+	   Say Y here to support the DvbWorld 2102 DVB-S USB2.0 receiver.
+
 config DVB_USB_ANYSEE
 	tristate "Anysee DVB-T/C USB2.0 support"
 	depends on DVB_USB
diff --git a/drivers/media/dvb/dvb-usb/Makefile b/drivers/media/dvb/dvb-usb/Makefile
index 44c11e45e564..e206f1ea0027 100644
--- a/drivers/media/dvb/dvb-usb/Makefile
+++ b/drivers/media/dvb/dvb-usb/Makefile
@@ -64,6 +64,9 @@ obj-$(CONFIG_DVB_USB_AF9005_REMOTE) += dvb-usb-af9005-remote.o
 dvb-usb-anysee-objs = anysee.o
 obj-$(CONFIG_DVB_USB_ANYSEE) += dvb-usb-anysee.o
 
+dvb-usb-dw2102-objs = dw2102.o
+obj-$(CONFIG_DVB_USB_DW2102) += dvb-usb-dw2102.o
+
 EXTRA_CFLAGS += -Idrivers/media/dvb/dvb-core/ -Idrivers/media/dvb/frontends/
 # due to tuner-xc3028
 EXTRA_CFLAGS += -Idrivers/media/common/tuners
diff --git a/drivers/media/dvb/dvb-usb/anysee.c b/drivers/media/dvb/dvb-usb/anysee.c
index adfd4fc82efd..2f408d2e1ef3 100644
--- a/drivers/media/dvb/dvb-usb/anysee.c
+++ b/drivers/media/dvb/dvb-usb/anysee.c
@@ -43,7 +43,7 @@ module_param_named(debug, dvb_usb_anysee_debug, int, 0644);
 MODULE_PARM_DESC(debug, "set debugging level" DVB_USB_DEBUG_STATUS);
 DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr);
 
-struct mutex anysee_usb_mutex;
+static struct mutex anysee_usb_mutex;
 
 static int anysee_ctrl_msg(struct dvb_usb_device *d, u8 *sbuf, u8 slen,
 	u8 *rbuf, u8 rlen)
diff --git a/drivers/media/dvb/dvb-usb/cxusb.c b/drivers/media/dvb/dvb-usb/cxusb.c
index 578afce6884c..aaa0b6f0b521 100644
--- a/drivers/media/dvb/dvb-usb/cxusb.c
+++ b/drivers/media/dvb/dvb-usb/cxusb.c
@@ -565,7 +565,8 @@ static int cxusb_lgh064f_tuner_attach(struct dvb_usb_adapter *adap)
 
 static int dvico_bluebird_xc2028_callback(void *ptr, int command, int arg)
 {
-	struct dvb_usb_device *d = ptr;
+	struct dvb_usb_adapter *adap = ptr;
+	struct dvb_usb_device *d = adap->dev;
 
 	switch (command) {
 	case XC2028_TUNER_RESET:
@@ -593,9 +594,9 @@ static int cxusb_dvico_xc3028_tuner_attach(struct dvb_usb_adapter *adap)
 		.callback  = dvico_bluebird_xc2028_callback,
 	};
 	static struct xc2028_ctrl ctl = {
-		.fname       = "xc3028-dvico-au-01.fw",
+		.fname       = "xc3028-v27.fw",
 		.max_len     = 64,
-		.scode_table = XC3028_FE_ZARLINK456,
+		.demod       = XC3028_FE_ZARLINK456,
 	};
 
 	fe = dvb_attach(xc2028_attach, adap->fe, &cfg);
diff --git a/drivers/media/dvb/dvb-usb/dvb-usb-ids.h b/drivers/media/dvb/dvb-usb/dvb-usb-ids.h
index e5238b31e946..029b437caf9a 100644
--- a/drivers/media/dvb/dvb-usb/dvb-usb-ids.h
+++ b/drivers/media/dvb/dvb-usb/dvb-usb-ids.h
@@ -204,5 +204,6 @@
 #define USB_PID_ASUS_U3000				0x171f
 #define USB_PID_ASUS_U3100				0x173f
 #define USB_PID_YUAN_EC372S				0x1edc
+#define USB_PID_DW2102					0x2102
 
 #endif
diff --git a/drivers/media/dvb/dvb-usb/dw2102.c b/drivers/media/dvb/dvb-usb/dw2102.c
new file mode 100644
index 000000000000..a4d898b44e55
--- /dev/null
+++ b/drivers/media/dvb/dvb-usb/dw2102.c
@@ -0,0 +1,425 @@
+/* DVB USB framework compliant Linux driver for the DVBWorld DVB-S 2102 Card
+*
+* Copyright (C) 2008 Igor M. Liplianin (liplianin@me.by)
+*
+*	This program is free software; you can redistribute it and/or modify it
+*	under the terms of the GNU General Public License as published by the
+*	Free Software Foundation, version 2.
+*
+* see Documentation/dvb/README.dvb-usb for more information
+*/
+#include <linux/version.h>
+#include "dw2102.h"
+#include "stv0299.h"
+#include "z0194a.h"
+
+#ifndef USB_PID_DW2102
+#define USB_PID_DW2102 0x2102
+#endif
+
+#define DW2102_READ_MSG 0
+#define DW2102_WRITE_MSG 1
+
+#define REG_1F_SYMBOLRATE_BYTE0 0x1f
+#define REG_20_SYMBOLRATE_BYTE1 0x20
+#define REG_21_SYMBOLRATE_BYTE2 0x21
+
+#define DW2102_VOLTAGE_CTRL (0x1800)
+#define DW2102_RC_QUERY (0x1a00)
+
+struct dw2102_state {
+	u32 last_key_pressed;
+};
+struct dw2102_rc_keys {
+	u32 keycode;
+	u32 event;
+};
+
+DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr);
+
+static int dw2102_op_rw(struct usb_device *dev, u8 request, u16 value,
+		u8 *data, u16 len, int flags)
+{
+	int ret;
+	u8 u8buf[len];
+
+	unsigned int pipe = (flags == DW2102_READ_MSG) ?
+		usb_rcvctrlpipe(dev, 0) : usb_sndctrlpipe(dev, 0);
+	u8 request_type = (flags == DW2102_READ_MSG) ? USB_DIR_IN : USB_DIR_OUT;
+
+	if (flags == DW2102_WRITE_MSG)
+		memcpy(u8buf, data, len);
+	ret = usb_control_msg(dev, pipe, request,
+		request_type | USB_TYPE_VENDOR, value, 0 , u8buf, len, 2000);
+
+	if (flags == DW2102_READ_MSG)
+		memcpy(data, u8buf, len);
+	return ret;
+}
+
+/* I2C */
+
+static int dw2102_i2c_transfer(struct i2c_adapter *adap, struct i2c_msg msg[],
+		int num)
+{
+struct dvb_usb_device *d = i2c_get_adapdata(adap);
+	int i = 0, ret = 0;
+	u8 buf6[] = {0x2c, 0x05, 0xc0, 0, 0, 0, 0};
+	u8 request;
+	u16 value;
+
+	if (!d)
+		return -ENODEV;
+	if (mutex_lock_interruptible(&d->i2c_mutex) < 0)
+		return -EAGAIN;
+
+	switch (num) {
+	case 2:
+		/* read stv0299 register */
+		request = 0xb5;
+		value = msg[0].buf[0];/* register */
+		for (i = 0; i < msg[1].len; i++) {
+			value = value + i;
+			ret = dw2102_op_rw(d->udev, 0xb5,
+				value, buf6, 2, DW2102_READ_MSG);
+			msg[1].buf[i] = buf6[0];
+
+		}
+		break;
+	case 1:
+		switch (msg[0].addr) {
+		case 0x68:
+			/* write to stv0299 register */
+			buf6[0] = 0x2a;
+			buf6[1] = msg[0].buf[0];
+			buf6[2] = msg[0].buf[1];
+			ret = dw2102_op_rw(d->udev, 0xb2,
+				0, buf6, 3, DW2102_WRITE_MSG);
+			break;
+		case 0x60:
+			if (msg[0].flags == 0) {
+			/* write to tuner pll */
+				buf6[0] = 0x2c;
+				buf6[1] = 5;
+				buf6[2] = 0xc0;
+				buf6[3] = msg[0].buf[0];
+				buf6[4] = msg[0].buf[1];
+				buf6[5] = msg[0].buf[2];
+				buf6[6] = msg[0].buf[3];
+				ret = dw2102_op_rw(d->udev, 0xb2,
+				0, buf6, 7, DW2102_WRITE_MSG);
+			} else {
+			/* write to tuner pll */
+				ret = dw2102_op_rw(d->udev, 0xb5,
+				0, buf6, 1, DW2102_READ_MSG);
+				msg[0].buf[0] = buf6[0];
+			}
+			break;
+		case (DW2102_RC_QUERY):
+			ret  = dw2102_op_rw(d->udev, 0xb8,
+				0, buf6, 2, DW2102_READ_MSG);
+			msg[0].buf[0] = buf6[0];
+			msg[0].buf[1] = buf6[1];
+			break;
+		case (DW2102_VOLTAGE_CTRL):
+			buf6[0] = 0x30;
+			buf6[1] = msg[0].buf[0];
+			ret = dw2102_op_rw(d->udev, 0xb2,
+				0, buf6, 2, DW2102_WRITE_MSG);
+			break;
+		}
+
+		break;
+	}
+
+	mutex_unlock(&d->i2c_mutex);
+	return num;
+}
+
+static u32 dw2102_i2c_func(struct i2c_adapter *adapter)
+{
+	return I2C_FUNC_I2C;
+}
+
+static struct i2c_algorithm dw2102_i2c_algo = {
+	.master_xfer = dw2102_i2c_transfer,
+	.functionality = dw2102_i2c_func,
+};
+
+static int dw2102_set_voltage(struct dvb_frontend *fe, fe_sec_voltage_t voltage)
+{
+	static u8 command_13v[1] = {0x00};
+	static u8 command_18v[1] = {0x01};
+	struct i2c_msg msg[] = {
+		{.addr = DW2102_VOLTAGE_CTRL, .flags = 0,
+			.buf = command_13v, .len = 1},
+	};
+
+	struct dvb_usb_adapter *udev_adap =
+		(struct dvb_usb_adapter *)(fe->dvb->priv);
+	if (voltage == SEC_VOLTAGE_18)
+		msg[0].buf = command_18v;
+	i2c_transfer(&udev_adap->dev->i2c_adap, msg, 1);
+	return 0;
+}
+
+static int dw2102_frontend_attach(struct dvb_usb_adapter *d)
+{
+	d->fe = dvb_attach(stv0299_attach, &sharp_z0194a_config,
+		&d->dev->i2c_adap);
+	if (d->fe != NULL) {
+		d->fe->ops.set_voltage = dw2102_set_voltage;
+		info("Attached stv0299!\n");
+		return 0;
+	}
+	return -EIO;
+}
+
+static int dw2102_tuner_attach(struct dvb_usb_adapter *adap)
+{
+	dvb_attach(dvb_pll_attach, adap->fe, 0x60,
+		&adap->dev->i2c_adap, DVB_PLL_OPERA1);
+	return 0;
+}
+
+static struct dvb_usb_rc_key dw2102_rc_keys[] = {
+	{ 0xf8,	0x0a, KEY_Q },		/*power*/
+	{ 0xf8,	0x0c, KEY_M },		/*mute*/
+	{ 0xf8,	0x11, KEY_1 },
+	{ 0xf8,	0x12, KEY_2 },
+	{ 0xf8,	0x13, KEY_3 },
+	{ 0xf8,	0x14, KEY_4 },
+	{ 0xf8,	0x15, KEY_5 },
+	{ 0xf8,	0x16, KEY_6 },
+	{ 0xf8,	0x17, KEY_7 },
+	{ 0xf8,	0x18, KEY_8 },
+	{ 0xf8,	0x19, KEY_9 },
+	{ 0xf8, 0x10, KEY_0 },
+	{ 0xf8, 0x1c, KEY_PAGEUP },	/*ch+*/
+	{ 0xf8, 0x0f, KEY_PAGEDOWN },	/*ch-*/
+	{ 0xf8, 0x1a, KEY_O },		/*vol+*/
+	{ 0xf8, 0x0e, KEY_Z },		/*vol-*/
+	{ 0xf8, 0x04, KEY_R },		/*rec*/
+	{ 0xf8, 0x09, KEY_D },		/*fav*/
+	{ 0xf8, 0x08, KEY_BACKSPACE },	/*rewind*/
+	{ 0xf8, 0x07, KEY_A },		/*fast*/
+	{ 0xf8, 0x0b, KEY_P },		/*pause*/
+	{ 0xf8, 0x02, KEY_ESC },	/*cancel*/
+	{ 0xf8, 0x03, KEY_G },		/*tab*/
+	{ 0xf8, 0x00, KEY_UP },		/*up*/
+	{ 0xf8, 0x1f, KEY_ENTER },	/*ok*/
+	{ 0xf8, 0x01, KEY_DOWN },	/*down*/
+	{ 0xf8, 0x05, KEY_C },		/*cap*/
+	{ 0xf8, 0x06, KEY_S },		/*stop*/
+	{ 0xf8, 0x40, KEY_F },		/*full*/
+	{ 0xf8, 0x1e, KEY_W },		/*tvmode*/
+	{ 0xf8, 0x1b, KEY_B },		/*recall*/
+
+};
+
+
+
+static int dw2102_rc_query(struct dvb_usb_device *d, u32 *event, int *state)
+{
+	struct dw2102_state *st = d->priv;
+	u8 key[2];
+	struct i2c_msg msg[] = {
+		{.addr = DW2102_RC_QUERY, .flags = I2C_M_RD, .buf = key,
+		.len = 2},
+	};
+	int i;
+
+	*state = REMOTE_NO_KEY_PRESSED;
+	if (dw2102_i2c_transfer(&d->i2c_adap, msg, 1) == 1) {
+		for (i = 0; i < ARRAY_SIZE(dw2102_rc_keys); i++) {
+			if (dw2102_rc_keys[i].data == msg[0].buf[0]) {
+				*state = REMOTE_KEY_PRESSED;
+				*event = dw2102_rc_keys[i].event;
+				st->last_key_pressed =
+					dw2102_rc_keys[i].event;
+				break;
+			}
+		st->last_key_pressed = 0;
+		}
+	}
+	/* info("key: %x %x\n",key[0],key[1]); */
+	return 0;
+}
+
+static struct usb_device_id dw2102_table[] = {
+	{USB_DEVICE(USB_VID_CYPRESS, USB_PID_DW2102)},
+	{USB_DEVICE(USB_VID_CYPRESS, 0x2101)},
+	{ }
+};
+
+MODULE_DEVICE_TABLE(usb, dw2102_table);
+
+static int dw2102_load_firmware(struct usb_device *dev,
+			const struct firmware *frmwr)
+{
+	u8 *b, *p;
+	int ret = 0, i;
+	u8 reset;
+	u8 reset16 [] = {0, 0, 0, 0, 0, 0, 0};
+	const struct firmware *fw;
+	const char *filename = "dvb-usb-dw2101.fw";
+	switch (dev->descriptor.idProduct) {
+	case 0x2101:
+		ret = request_firmware(&fw, filename, &dev->dev);
+		if (ret != 0) {
+			err("did not find the firmware file. (%s) "
+			"Please see linux/Documentation/dvb/ for more details "
+			"on firmware-problems.", filename);
+			return ret;
+		}
+		break;
+	case USB_PID_DW2102:
+		fw = frmwr;
+		break;
+	}
+	info("start downloading DW2102 firmware");
+	p = kmalloc(fw->size, GFP_KERNEL);
+	reset = 1;
+	/*stop the CPU*/
+	dw2102_op_rw(dev, 0xa0, 0x7f92, &reset, 1, DW2102_WRITE_MSG);
+	dw2102_op_rw(dev, 0xa0, 0xe600, &reset, 1, DW2102_WRITE_MSG);
+
+	if (p != NULL) {
+		memcpy(p, fw->data, fw->size);
+		for (i = 0; i < fw->size; i += 0x40) {
+			b = (u8 *) p + i;
+			if (dw2102_op_rw
+				(dev, 0xa0, i, b , 0x40,
+					DW2102_WRITE_MSG) != 0x40
+				) {
+				err("error while transferring firmware");
+				ret = -EINVAL;
+				break;
+			}
+		}
+		/* restart the CPU */
+		reset = 0;
+		if (ret || dw2102_op_rw
+			(dev, 0xa0, 0x7f92, &reset, 1,
+			DW2102_WRITE_MSG) != 1) {
+			err("could not restart the USB controller CPU.");
+			ret = -EINVAL;
+		}
+		if (ret || dw2102_op_rw
+			(dev, 0xa0, 0xe600, &reset, 1,
+			DW2102_WRITE_MSG) != 1) {
+			err("could not restart the USB controller CPU.");
+			ret = -EINVAL;
+		}
+		/* init registers */
+		switch (dev->descriptor.idProduct) {
+		case USB_PID_DW2102:
+			dw2102_op_rw
+				(dev, 0xbf, 0x0040, &reset, 0,
+				DW2102_WRITE_MSG);
+			dw2102_op_rw
+				(dev, 0xb9, 0x0000, &reset16[0], 2,
+				DW2102_READ_MSG);
+			break;
+		case 0x2101:
+			dw2102_op_rw
+				(dev, 0xbc, 0x0030, &reset16[0], 2,
+				DW2102_READ_MSG);
+			dw2102_op_rw
+				(dev, 0xba, 0x0000, &reset16[0], 7,
+				DW2102_READ_MSG);
+			dw2102_op_rw
+				(dev, 0xba, 0x0000, &reset16[0], 7,
+				DW2102_READ_MSG);
+			dw2102_op_rw
+				(dev, 0xb9, 0x0000, &reset16[0], 2,
+				DW2102_READ_MSG);
+			break;
+		}
+		kfree(p);
+	}
+	return ret;
+}
+
+static struct dvb_usb_device_properties dw2102_properties = {
+	.caps = DVB_USB_IS_AN_I2C_ADAPTER,
+	.usb_ctrl = DEVICE_SPECIFIC,
+	.firmware = "dvb-usb-dw2102.fw",
+	.size_of_priv = sizeof(struct dw2102_state),
+	.no_reconnect = 1,
+
+	.i2c_algo = &dw2102_i2c_algo,
+	.rc_key_map = dw2102_rc_keys,
+	.rc_key_map_size = ARRAY_SIZE(dw2102_rc_keys),
+	.rc_interval = 150,
+	.rc_query = dw2102_rc_query,
+
+	.generic_bulk_ctrl_endpoint = 0x81,
+	/* parameter for the MPEG2-data transfer */
+	.num_adapters = 1,
+	.download_firmware = dw2102_load_firmware,
+	.adapter = {
+		{
+			.frontend_attach = dw2102_frontend_attach,
+			.streaming_ctrl = NULL,
+			.tuner_attach = dw2102_tuner_attach,
+			.stream = {
+				.type = USB_BULK,
+				.count = 8,
+				.endpoint = 0x82,
+				.u = {
+					.bulk = {
+						.buffersize = 4096,
+					}
+				}
+			},
+		}
+	},
+	.num_device_descs = 2,
+	.devices = {
+		{"DVBWorld DVB-S 2102 USB2.0",
+			{&dw2102_table[0], NULL},
+			{NULL},
+		},
+		{"DVBWorld DVB-S 2101 USB2.0",
+			{&dw2102_table[1], NULL},
+			{NULL},
+		},
+	}
+};
+
+static int dw2102_probe(struct usb_interface *intf,
+		const struct usb_device_id *id)
+{
+	return dvb_usb_device_init(intf, &dw2102_properties,
+		THIS_MODULE, NULL, adapter_nr);
+}
+
+static struct usb_driver dw2102_driver = {
+	.name = "dw2102",
+	.probe = dw2102_probe,
+	.disconnect = dvb_usb_device_exit,
+	.id_table = dw2102_table,
+};
+
+static int __init dw2102_module_init(void)
+{
+	int ret =  usb_register(&dw2102_driver);
+	if (ret)
+		err("usb_register failed. Error number %d", ret);
+
+	return ret;
+}
+
+static void __exit dw2102_module_exit(void)
+{
+	usb_deregister(&dw2102_driver);
+}
+
+module_init(dw2102_module_init);
+module_exit(dw2102_module_exit);
+
+MODULE_AUTHOR("Igor M. Liplianin (c) liplianin@me.by");
+MODULE_DESCRIPTION("Driver for DVBWorld DVB-S 2101 2102 USB2.0 device");
+MODULE_VERSION("0.1");
+MODULE_LICENSE("GPL");
diff --git a/drivers/media/dvb/dvb-usb/dw2102.h b/drivers/media/dvb/dvb-usb/dw2102.h
new file mode 100644
index 000000000000..7a310f906837
--- /dev/null
+++ b/drivers/media/dvb/dvb-usb/dw2102.h
@@ -0,0 +1,9 @@
+#ifndef _DW2102_H_
+#define _DW2102_H_
+
+#define DVB_USB_LOG_PREFIX "dw2102"
+#include "dvb-usb.h"
+
+extern int dvb_usb_dw2102_debug;
+#define deb_xfer(args...) dprintk(dvb_usb_dw2102_debug, 0x02, args)
+#endif
diff --git a/drivers/media/dvb/frontends/Kconfig b/drivers/media/dvb/frontends/Kconfig
index c20553c4da1f..7dbb4a223c99 100644
--- a/drivers/media/dvb/frontends/Kconfig
+++ b/drivers/media/dvb/frontends/Kconfig
@@ -97,9 +97,8 @@ comment "DVB-T (terrestrial) frontends"
 
 config DVB_SP8870
 	tristate "Spase sp8870 based"
-	depends on DVB_CORE && I2C && HOTPLUG
+	depends on DVB_CORE && I2C
 	default m if DVB_FE_CUSTOMISE
-	select FW_LOADER
 	help
 	  A DVB-T tuner module. Say Y when you want to support this frontend.
 
@@ -110,9 +109,8 @@ config DVB_SP8870
 
 config DVB_SP887X
 	tristate "Spase sp887x based"
-	depends on DVB_CORE && I2C && HOTPLUG
+	depends on DVB_CORE && I2C
 	default m if DVB_FE_CUSTOMISE
-	select FW_LOADER
 	help
 	  A DVB-T tuner module. Say Y when you want to support this frontend.
 
@@ -135,6 +133,19 @@ config DVB_CX22702
 	help
 	  A DVB-T tuner module. Say Y when you want to support this frontend.
 
+config DVB_DRX397XD
+	tristate "Micronas DRX3975D/DRX3977D based"
+	depends on DVB_CORE && I2C
+	default m if DVB_FE_CUSTOMISE
+	help
+	  A DVB-T tuner module. Say Y when you want to support this frontend.
+
+	  TODO:
+	  This driver needs external firmware. Please use the command
+	  "<kerneldir>/Documentation/dvb/get_dvb_firmware drx397xD" to
+	  download/extract them, and then copy them to /usr/lib/hotplug/firmware
+	  or /lib/firmware (depending on configuration of firmware hotplug).
+
 config DVB_L64781
 	tristate "LSI L64781"
 	depends on DVB_CORE && I2C
@@ -144,9 +155,8 @@ config DVB_L64781
 
 config DVB_TDA1004X
 	tristate "Philips TDA10045H/TDA10046H based"
-	depends on DVB_CORE && I2C && HOTPLUG
+	depends on DVB_CORE && I2C
 	default m if DVB_FE_CUSTOMISE
-	select FW_LOADER
 	help
 	  A DVB-T tuner module. Say Y when you want to support this frontend.
 
@@ -211,9 +221,8 @@ config DVB_DIB7000P
 
 config DVB_TDA10048
 	tristate "Philips TDA10048HN based"
-	depends on DVB_CORE && I2C && HOTPLUG
+	depends on DVB_CORE && I2C
 	default m if DVB_FE_CUSTOMISE
-	select FW_LOADER
 	help
 	  A DVB-T tuner module. Say Y when you want to support this frontend.
 
@@ -253,9 +262,8 @@ comment "ATSC (North American/Korean Terrestrial/Cable DTV) frontends"
 
 config DVB_NXT200X
 	tristate "NxtWave Communications NXT2002/NXT2004 based"
-	depends on DVB_CORE && I2C && HOTPLUG
+	depends on DVB_CORE && I2C
 	default m if DVB_FE_CUSTOMISE
-	select FW_LOADER
 	help
 	  An ATSC 8VSB and QAM64/256 tuner module. Say Y when you want
 	  to support this frontend.
@@ -268,9 +276,8 @@ config DVB_NXT200X
 
 config DVB_OR51211
 	tristate "Oren OR51211 based"
-	depends on DVB_CORE && I2C && HOTPLUG
+	depends on DVB_CORE && I2C
 	default m if DVB_FE_CUSTOMISE
-	select FW_LOADER
 	help
 	  An ATSC 8VSB tuner module. Say Y when you want to support this frontend.
 
@@ -281,9 +288,8 @@ config DVB_OR51211
 
 config DVB_OR51132
 	tristate "Oren OR51132 based"
-	depends on DVB_CORE && I2C && HOTPLUG
+	depends on DVB_CORE && I2C
 	default m if DVB_FE_CUSTOMISE
-	select FW_LOADER
 	help
 	  An ATSC 8VSB and QAM64/256 tuner module. Say Y when you want
 	  to support this frontend.
@@ -297,9 +303,8 @@ config DVB_OR51132
 
 config DVB_BCM3510
 	tristate "Broadcom BCM3510"
-	depends on DVB_CORE && I2C && HOTPLUG
+	depends on DVB_CORE && I2C
 	default m if DVB_FE_CUSTOMISE
-	select FW_LOADER
 	help
 	  An ATSC 8VSB/16VSB and QAM64/256 tuner module. Say Y when you want to
 	  support this frontend.
diff --git a/drivers/media/dvb/frontends/Makefile b/drivers/media/dvb/frontends/Makefile
index a89dc0fc4c6f..028da55611c0 100644
--- a/drivers/media/dvb/frontends/Makefile
+++ b/drivers/media/dvb/frontends/Makefile
@@ -25,6 +25,7 @@ obj-$(CONFIG_DVB_NXT6000) += nxt6000.o
 obj-$(CONFIG_DVB_MT352) += mt352.o
 obj-$(CONFIG_DVB_ZL10353) += zl10353.o
 obj-$(CONFIG_DVB_CX22702) += cx22702.o
+obj-$(CONFIG_DVB_DRX397XD) += drx397xD.o
 obj-$(CONFIG_DVB_TDA10021) += tda10021.o
 obj-$(CONFIG_DVB_TDA10023) += tda10023.o
 obj-$(CONFIG_DVB_STV0297) += stv0297.o
diff --git a/drivers/media/dvb/frontends/drx397xD.c b/drivers/media/dvb/frontends/drx397xD.c
new file mode 100644
index 000000000000..3cbed874a6f8
--- /dev/null
+++ b/drivers/media/dvb/frontends/drx397xD.c
@@ -0,0 +1,1504 @@
+/*
+ * Driver for Micronas drx397xD demodulator
+ *
+ * Copyright (C) 2007 Henk Vergonet <Henk.Vergonet@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#define DEBUG			/* uncomment if you want debugging output */
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/init.h>
+#include <linux/device.h>
+#include <linux/delay.h>
+#include <linux/string.h>
+#include <linux/firmware.h>
+#include <asm/div64.h>
+
+#include "dvb_frontend.h"
+#include "drx397xD.h"
+
+static const char mod_name[] = "drx397xD";
+
+#define MAX_CLOCK_DRIFT		200	/* maximal 200 PPM allowed */
+
+#define F_SET_0D0h	1
+#define F_SET_0D4h	2
+
+typedef enum fw_ix {
+#define _FW_ENTRY(a, b)		b
+#include "drx397xD_fw.h"
+} fw_ix_t;
+
+/* chip specifics */
+struct drx397xD_state {
+	struct i2c_adapter *i2c;
+	struct dvb_frontend frontend;
+	struct drx397xD_config config;
+	fw_ix_t chip_rev;
+	int flags;
+	u32 bandwidth_parm;	/* internal bandwidth conversions */
+	u32 f_osc;		/* w90: actual osc frequency [Hz] */
+};
+
+/*******************************************************************************
+ * Firmware
+ ******************************************************************************/
+
+static const char *blob_name[] = {
+#define _BLOB_ENTRY(a, b)		a
+#include "drx397xD_fw.h"
+};
+
+typedef enum blob_ix {
+#define _BLOB_ENTRY(a, b)		b
+#include "drx397xD_fw.h"
+} blob_ix_t;
+
+static struct {
+	const char *name;
+	const struct firmware *file;
+	rwlock_t lock;
+	int refcnt;
+	const u8 *data[ARRAY_SIZE(blob_name)];
+} fw[] = {
+#define _FW_ENTRY(a, b)		{			\
+			.name	= a,			\
+			.file	= 0,			\
+			.lock	= RW_LOCK_UNLOCKED,	\
+			.refcnt = 0,			\
+			.data	= { }		}
+#include "drx397xD_fw.h"
+};
+
+/* use only with writer lock aquired */
+static void _drx_release_fw(struct drx397xD_state *s, fw_ix_t ix)
+{
+	memset(&fw[ix].data[0], 0, sizeof(fw[0].data));
+	if (fw[ix].file)
+		release_firmware(fw[ix].file);
+}
+
+static void drx_release_fw(struct drx397xD_state *s)
+{
+	fw_ix_t ix = s->chip_rev;
+
+	pr_debug("%s\n", __FUNCTION__);
+
+	write_lock(&fw[ix].lock);
+	if (fw[ix].refcnt) {
+		fw[ix].refcnt--;
+		if (fw[ix].refcnt == 0)
+			_drx_release_fw(s, ix);
+	}
+	write_unlock(&fw[ix].lock);
+}
+
+static int drx_load_fw(struct drx397xD_state *s, fw_ix_t ix)
+{
+	const u8 *data;
+	size_t size, len;
+	int i = 0, j, rc = -EINVAL;
+
+	pr_debug("%s\n", __FUNCTION__);
+
+	if (ix < 0 || ix >= ARRAY_SIZE(fw))
+		return -EINVAL;
+	s->chip_rev = ix;
+
+	write_lock(&fw[ix].lock);
+	if (fw[ix].file) {
+		rc = 0;
+		goto exit_ok;
+	}
+	memset(&fw[ix].data[0], 0, sizeof(fw[0].data));
+
+	if (request_firmware(&fw[ix].file, fw[ix].name, &s->i2c->dev) != 0) {
+		printk(KERN_ERR "%s: Firmware \"%s\" not available\n",
+		       mod_name, fw[ix].name);
+		rc = -ENOENT;
+		goto exit_err;
+	}
+
+	if (!fw[ix].file->data || fw[ix].file->size < 10)
+		goto exit_corrupt;
+
+	data = fw[ix].file->data;
+	size = fw[ix].file->size;
+
+	if (data[i++] != 2)	/* check firmware version */
+		goto exit_corrupt;
+
+	do {
+		switch (data[i++]) {
+		case 0x00:	/* bytecode */
+			if (i >= size)
+				break;
+			i += data[i];
+		case 0x01:	/* reset */
+		case 0x02:	/* sleep */
+			i++;
+			break;
+		case 0xfe:	/* name */
+			len = strnlen(&data[i], size - i);
+			if (i + len + 1 >= size)
+				goto exit_corrupt;
+			if (data[i + len + 1] != 0)
+				goto exit_corrupt;
+			for (j = 0; j < ARRAY_SIZE(blob_name); j++) {
+				if (strcmp(blob_name[j], &data[i]) == 0) {
+					fw[ix].data[j] = &data[i + len + 1];
+					pr_debug("Loading %s\n", blob_name[j]);
+				}
+			}
+			i += len + 1;
+			break;
+		case 0xff:	/* file terminator */
+			if (i == size) {
+				rc = 0;
+				goto exit_ok;
+			}
+		default:
+			goto exit_corrupt;
+		}
+	} while (i < size);
+      exit_corrupt:
+	printk(KERN_ERR "%s: Firmware is corrupt\n", mod_name);
+      exit_err:
+	_drx_release_fw(s, ix);
+	fw[ix].refcnt--;
+      exit_ok:
+	fw[ix].refcnt++;
+	write_unlock(&fw[ix].lock);
+	return rc;
+}
+
+/*******************************************************************************
+ * i2c bus IO
+ ******************************************************************************/
+
+static int write_fw(struct drx397xD_state *s, blob_ix_t ix)
+{
+	struct i2c_msg msg = {.addr = s->config.demod_address,.flags = 0 };
+	const u8 *data;
+	int len, rc = 0, i = 0;
+
+	if (ix < 0 || ix >= ARRAY_SIZE(blob_name)) {
+		pr_debug("%s drx_fw_ix_t out of range\n", __FUNCTION__);
+		return -EINVAL;
+	}
+	pr_debug("%s %s\n", __FUNCTION__, blob_name[ix]);
+
+	read_lock(&fw[s->chip_rev].lock);
+	data = fw[s->chip_rev].data[ix];
+	if (!data) {
+		rc = -EINVAL;
+		goto exit_rc;
+	}
+
+	for (;;) {
+		switch (data[i++]) {
+		case 0:	/* bytecode */
+			len = data[i++];
+			msg.len = len;
+			msg.buf = (__u8 *) &data[i];
+			if (i2c_transfer(s->i2c, &msg, 1) != 1) {
+				rc = -EIO;
+				goto exit_rc;
+			}
+			i += len;
+			break;
+		case 1:	/* reset */
+		case 2:	/* sleep */
+			i++;
+			break;
+		default:
+			goto exit_rc;
+		}
+	}
+      exit_rc:
+	read_unlock(&fw[s->chip_rev].lock);
+	return 0;
+}
+
+/* Function is not endian safe, use the RD16 wrapper below */
+static int _read16(struct drx397xD_state *s, u32 i2c_adr)
+{
+	int rc;
+	u8 a[4];
+	u16 v;
+	struct i2c_msg msg[2] = {
+		{
+		 .addr = s->config.demod_address,
+		 .flags = 0,
+		 .buf = a,
+		 .len = sizeof(a)
+		 }
+		, {
+		   .addr = s->config.demod_address,
+		   .flags = I2C_M_RD,
+		   .buf = (u8 *) & v,
+		   .len = sizeof(v)
+		   }
+	};
+
+	*(u32 *) a = i2c_adr;
+
+	rc = i2c_transfer(s->i2c, msg, 2);
+	if (rc != 2)
+		return -EIO;
+
+	return le16_to_cpu(v);
+}
+
+/* Function is not endian safe, use the WR16.. wrappers below */
+static int _write16(struct drx397xD_state *s, u32 i2c_adr, u16 val)
+{
+	u8 a[6];
+	int rc;
+	struct i2c_msg msg = {
+		.addr = s->config.demod_address,
+		.flags = 0,
+		.buf = a,
+		.len = sizeof(a)
+	};
+
+	*(u32 *) a = i2c_adr;
+	*(u16 *) & a[4] = val;
+
+	rc = i2c_transfer(s->i2c, &msg, 1);
+	if (rc != 1)
+		return -EIO;
+	return 0;
+}
+
+#define WR16(ss,adr, val) \
+		_write16(ss, I2C_ADR_C0(adr), cpu_to_le16(val))
+#define WR16_E0(ss,adr, val) \
+		_write16(ss, I2C_ADR_E0(adr), cpu_to_le16(val))
+#define RD16(ss,adr) \
+		_read16(ss, I2C_ADR_C0(adr))
+
+#define EXIT_RC( cmd )	if ( (rc = (cmd)) < 0) goto exit_rc
+
+/*******************************************************************************
+ * Tuner callback
+ ******************************************************************************/
+
+static int PLL_Set(struct drx397xD_state *s,
+		   struct dvb_frontend_parameters *fep, int *df_tuner)
+{
+	struct dvb_frontend *fe = &s->frontend;
+	u32 f_tuner, f = fep->frequency;
+	int rc;
+
+	pr_debug("%s\n", __FUNCTION__);
+
+	if ((f > s->frontend.ops.tuner_ops.info.frequency_max) ||
+	    (f < s->frontend.ops.tuner_ops.info.frequency_min))
+		return -EINVAL;
+
+	*df_tuner = 0;
+	if (!s->frontend.ops.tuner_ops.set_params ||
+	    !s->frontend.ops.tuner_ops.get_frequency)
+		return -ENOSYS;
+
+	rc = s->frontend.ops.tuner_ops.set_params(fe, fep);
+	if (rc < 0)
+		return rc;
+
+	rc = s->frontend.ops.tuner_ops.get_frequency(fe, &f_tuner);
+	if (rc < 0)
+		return rc;
+
+	*df_tuner = f_tuner - f;
+	pr_debug("%s requested %d [Hz] tuner %d [Hz]\n", __FUNCTION__, f,
+		 f_tuner);
+
+	return 0;
+}
+
+/*******************************************************************************
+ * Demodulator helper functions
+ ******************************************************************************/
+
+static int SC_WaitForReady(struct drx397xD_state *s)
+{
+	int cnt = 1000;
+	int rc;
+
+	pr_debug("%s\n", __FUNCTION__);
+
+	while (cnt--) {
+		rc = RD16(s, 0x820043);
+		if (rc == 0)
+			return 0;
+	}
+	return -1;
+}
+
+static int SC_SendCommand(struct drx397xD_state *s, int cmd)
+{
+	int rc;
+
+	pr_debug("%s\n", __FUNCTION__);
+
+	WR16(s, 0x820043, cmd);
+	SC_WaitForReady(s);
+	rc = RD16(s, 0x820042);
+	if ((rc & 0xffff) == 0xffff)
+		return -1;
+	return 0;
+}
+
+static int HI_Command(struct drx397xD_state *s, u16 cmd)
+{
+	int rc, cnt = 1000;
+
+	pr_debug("%s\n", __FUNCTION__);
+
+	rc = WR16(s, 0x420032, cmd);
+	if (rc < 0)
+		return rc;
+
+	do {
+		rc = RD16(s, 0x420032);
+		if (rc == 0) {
+			rc = RD16(s, 0x420031);
+			return rc;
+		}
+		if (rc < 0)
+			return rc;
+	} while (--cnt);
+	return rc;
+}
+
+static int HI_CfgCommand(struct drx397xD_state *s)
+{
+
+	pr_debug("%s\n", __FUNCTION__);
+
+	WR16(s, 0x420033, 0x3973);
+	WR16(s, 0x420034, s->config.w50);	// code 4, log 4
+	WR16(s, 0x420035, s->config.w52);	// code 15,  log 9
+	WR16(s, 0x420036, s->config.demod_address << 1);
+	WR16(s, 0x420037, s->config.w56);	// code (set_i2c ??  initX 1 ), log 1
+//      WR16(s, 0x420033, 0x3973);
+	if ((s->config.w56 & 8) == 0)
+		return HI_Command(s, 3);
+	return WR16(s, 0x420032, 0x3);
+}
+
+static const u8 fastIncrDecLUT_15273[] = {
+	0x0e, 0x0f, 0x0f, 0x10, 0x11, 0x12, 0x12, 0x13, 0x14,
+	0x15, 0x16, 0x17, 0x18, 0x1a, 0x1b, 0x1c, 0x1d, 0x1f
+};
+
+static const u8 slowIncrDecLUT_15272[] = {
+	3, 4, 4, 5, 6
+};
+
+static int SetCfgIfAgc(struct drx397xD_state *s, struct drx397xD_CfgIfAgc *agc)
+{
+	u16 w06 = agc->w06;
+	u16 w08 = agc->w08;
+	u16 w0A = agc->w0A;
+	u16 w0C = agc->w0C;
+	int quot, rem, i, rc = -EINVAL;
+
+	pr_debug("%s\n", __FUNCTION__);
+
+	if (agc->w04 > 0x3ff)
+		goto exit_rc;
+
+	if (agc->d00 == 1) {
+		EXIT_RC(RD16(s, 0x0c20010));
+		rc &= ~0x10;
+		EXIT_RC(WR16(s, 0x0c20010, rc));
+		return WR16(s, 0x0c20030, agc->w04 & 0x7ff);
+	}
+
+	if (agc->d00 != 0)
+		goto exit_rc;
+	if (w0A < w08)
+		goto exit_rc;
+	if (w0A > 0x3ff)
+		goto exit_rc;
+	if (w0C > 0x3ff)
+		goto exit_rc;
+	if (w06 > 0x3ff)
+		goto exit_rc;
+
+	EXIT_RC(RD16(s, 0x0c20010));
+	rc |= 0x10;
+	EXIT_RC(WR16(s, 0x0c20010, rc));
+
+	EXIT_RC(WR16(s, 0x0c20025, (w06 >> 1) & 0x1ff));
+	EXIT_RC(WR16(s, 0x0c20031, (w0A - w08) >> 1));
+	EXIT_RC(WR16(s, 0x0c20032, ((w0A + w08) >> 1) - 0x1ff));
+
+	quot = w0C / 113;
+	rem = w0C % 113;
+	if (quot <= 8) {
+		quot = 8 - quot;
+	} else {
+		quot = 0;
+		rem += 113;
+	}
+
+	EXIT_RC(WR16(s, 0x0c20024, quot));
+
+	i = fastIncrDecLUT_15273[rem / 8];
+	EXIT_RC(WR16(s, 0x0c2002d, i));
+	EXIT_RC(WR16(s, 0x0c2002e, i));
+
+	i = slowIncrDecLUT_15272[rem / 28];
+	EXIT_RC(WR16(s, 0x0c2002b, i));
+	rc = WR16(s, 0x0c2002c, i);
+      exit_rc:
+	return rc;
+}
+
+static int SetCfgRfAgc(struct drx397xD_state *s, struct drx397xD_CfgRfAgc *agc)
+{
+	u16 w04 = agc->w04;
+	u16 w06 = agc->w06;
+	int rc = -1;
+
+	pr_debug("%s %d 0x%x 0x%x\n", __FUNCTION__, agc->d00, w04, w06);
+
+	if (w04 > 0x3ff)
+		goto exit_rc;
+
+	switch (agc->d00) {
+	case 1:
+		if (w04 == 0x3ff)
+			w04 = 0x400;
+
+		EXIT_RC(WR16(s, 0x0c20036, w04));
+		s->config.w9C &= ~2;
+		EXIT_RC(WR16(s, 0x0c20015, s->config.w9C));
+		EXIT_RC(RD16(s, 0x0c20010));
+		rc &= 0xbfdf;
+		EXIT_RC(WR16(s, 0x0c20010, rc));
+		EXIT_RC(RD16(s, 0x0c20013));
+		rc &= ~2;
+		break;
+	case 0:
+		// loc_8000659
+		s->config.w9C &= ~2;
+		EXIT_RC(WR16(s, 0x0c20015, s->config.w9C));
+		EXIT_RC(RD16(s, 0x0c20010));
+		rc &= 0xbfdf;
+		rc |= 0x4000;
+		EXIT_RC(WR16(s, 0x0c20010, rc));
+		EXIT_RC(WR16(s, 0x0c20051, (w06 >> 4) & 0x3f));
+		EXIT_RC(RD16(s, 0x0c20013));
+		rc &= ~2;
+		break;
+	default:
+		s->config.w9C |= 2;
+		EXIT_RC(WR16(s, 0x0c20015, s->config.w9C));
+		EXIT_RC(RD16(s, 0x0c20010));
+		rc &= 0xbfdf;
+		EXIT_RC(WR16(s, 0x0c20010, rc));
+
+		EXIT_RC(WR16(s, 0x0c20036, 0));
+
+		EXIT_RC(RD16(s, 0x0c20013));
+		rc |= 2;
+	}
+	rc = WR16(s, 0x0c20013, rc);
+      exit_rc:
+	return rc;
+}
+
+static int GetLockStatus(struct drx397xD_state *s, int *lockstat)
+{
+	int rc;
+
+	*lockstat = 0;
+
+	rc = RD16(s, 0x082004b);
+	if (rc < 0)
+		return rc;
+
+	if (s->config.d60 != 2)
+		return 0;
+
+	if ((rc & 7) == 7)
+		*lockstat |= 1;
+	if ((rc & 3) == 3)
+		*lockstat |= 2;
+	if (rc & 1)
+		*lockstat |= 4;
+	return 0;
+}
+
+static int CorrectSysClockDeviation(struct drx397xD_state *s)
+{
+	int rc = -EINVAL;
+	int lockstat;
+	u32 clk, clk_limit;
+
+	pr_debug("%s\n", __FUNCTION__);
+
+	if (s->config.d5C == 0) {
+		EXIT_RC(WR16(s, 0x08200e8, 0x010));
+		EXIT_RC(WR16(s, 0x08200e9, 0x113));
+		s->config.d5C = 1;
+		return rc;
+	}
+	if (s->config.d5C != 1)
+		goto exit_rc;
+
+	rc = RD16(s, 0x0820048);
+
+	rc = GetLockStatus(s, &lockstat);
+	if (rc < 0)
+		goto exit_rc;
+	if ((lockstat & 1) == 0)
+		goto exit_rc;
+
+	EXIT_RC(WR16(s, 0x0420033, 0x200));
+	EXIT_RC(WR16(s, 0x0420034, 0xc5));
+	EXIT_RC(WR16(s, 0x0420035, 0x10));
+	EXIT_RC(WR16(s, 0x0420036, 0x1));
+	EXIT_RC(WR16(s, 0x0420037, 0xa));
+	EXIT_RC(HI_Command(s, 6));
+	EXIT_RC(RD16(s, 0x0420040));
+	clk = rc;
+	EXIT_RC(RD16(s, 0x0420041));
+	clk |= rc << 16;
+
+	if (clk <= 0x26ffff)
+		goto exit_rc;
+	if (clk > 0x610000)
+		goto exit_rc;
+
+	if (!s->bandwidth_parm)
+		return -EINVAL;
+
+	/* round & convert to Hz */
+	clk = ((u64) (clk + 0x800000) * s->bandwidth_parm + (1 << 20)) >> 21;
+	clk_limit = s->config.f_osc * MAX_CLOCK_DRIFT / 1000;
+
+	if (clk - s->config.f_osc * 1000 + clk_limit <= 2 * clk_limit) {
+		s->f_osc = clk;
+		pr_debug("%s: osc %d %d [Hz]\n", __FUNCTION__,
+			 s->config.f_osc * 1000, clk - s->config.f_osc * 1000);
+	}
+	rc = WR16(s, 0x08200e8, 0);
+      exit_rc:
+	return rc;
+}
+
+static int ConfigureMPEGOutput(struct drx397xD_state *s, int type)
+{
+	int rc, si, bp;
+
+	pr_debug("%s\n", __FUNCTION__);
+
+	si = s->config.wA0;
+	if (s->config.w98 == 0) {
+		si |= 1;
+		bp = 0;
+	} else {
+		si &= ~1;
+		bp = 0x200;
+	}
+	if (s->config.w9A == 0) {
+		si |= 0x80;
+	} else {
+		si &= ~0x80;
+	}
+
+	EXIT_RC(WR16(s, 0x2150045, 0));
+	EXIT_RC(WR16(s, 0x2150010, si));
+	EXIT_RC(WR16(s, 0x2150011, bp));
+	rc = WR16(s, 0x2150012, (type == 0 ? 0xfff : 0));
+      exit_rc:
+	return rc;
+}
+
+static int drx_tune(struct drx397xD_state *s,
+		    struct dvb_frontend_parameters *fep)
+{
+	u16 v22 = 0;
+	u16 v1C = 0;
+	u16 v1A = 0;
+	u16 v18 = 0;
+	u32 edi = 0, ebx = 0, ebp = 0, edx = 0;
+	u16 v20 = 0, v1E = 0, v16 = 0, v14 = 0, v12 = 0, v10 = 0, v0E = 0;
+
+	int rc, df_tuner;
+	int a, b, c, d;
+	pr_debug("%s %d\n", __FUNCTION__, s->config.d60);
+
+	if (s->config.d60 != 2)
+		goto set_tuner;
+	rc = CorrectSysClockDeviation(s);
+	if (rc < 0)
+		goto set_tuner;
+
+	s->config.d60 = 1;
+	rc = ConfigureMPEGOutput(s, 0);
+	if (rc < 0)
+		goto set_tuner;
+      set_tuner:
+
+	rc = PLL_Set(s, fep, &df_tuner);
+	if (rc < 0) {
+		printk(KERN_ERR "Error in pll_set\n");
+		goto exit_rc;
+	}
+	msleep(200);
+
+	a = rc = RD16(s, 0x2150016);
+	if (rc < 0)
+		goto exit_rc;
+	b = rc = RD16(s, 0x2150010);
+	if (rc < 0)
+		goto exit_rc;
+	c = rc = RD16(s, 0x2150034);
+	if (rc < 0)
+		goto exit_rc;
+	d = rc = RD16(s, 0x2150035);
+	if (rc < 0)
+		goto exit_rc;
+	rc = WR16(s, 0x2150014, c);
+	rc = WR16(s, 0x2150015, d);
+	rc = WR16(s, 0x2150010, 0);
+	rc = WR16(s, 0x2150000, 2);
+	rc = WR16(s, 0x2150036, 0x0fff);
+	rc = WR16(s, 0x2150016, a);
+
+	rc = WR16(s, 0x2150010, 2);
+	rc = WR16(s, 0x2150007, 0);
+	rc = WR16(s, 0x2150000, 1);
+	rc = WR16(s, 0x2110000, 0);
+	rc = WR16(s, 0x0800000, 0);
+	rc = WR16(s, 0x2800000, 0);
+	rc = WR16(s, 0x2110010, 0x664);
+
+	rc = write_fw(s, DRXD_ResetECRAM);
+	rc = WR16(s, 0x2110000, 1);
+
+	rc = write_fw(s, DRXD_InitSC);
+	if (rc < 0)
+		goto exit_rc;
+
+	rc = SetCfgIfAgc(s, &s->config.ifagc);
+	if (rc < 0)
+		goto exit_rc;
+
+	rc = SetCfgRfAgc(s, &s->config.rfagc);
+	if (rc < 0)
+		goto exit_rc;
+
+	if (fep->u.ofdm.transmission_mode != TRANSMISSION_MODE_2K)
+		v22 = 1;
+	switch (fep->u.ofdm.transmission_mode) {
+	case TRANSMISSION_MODE_8K:
+		edi = 1;
+		if (s->chip_rev == DRXD_FW_B1)
+			break;
+
+		rc = WR16(s, 0x2010010, 0);
+		if (rc < 0)
+			break;
+		v1C = 0x63;
+		v1A = 0x53;
+		v18 = 0x43;
+		break;
+	default:
+		edi = 0;
+		if (s->chip_rev == DRXD_FW_B1)
+			break;
+
+		rc = WR16(s, 0x2010010, 1);
+		if (rc < 0)
+			break;
+
+		v1C = 0x61;
+		v1A = 0x47;
+		v18 = 0x41;
+	}
+
+	switch (fep->u.ofdm.guard_interval) {
+	case GUARD_INTERVAL_1_4:
+		edi |= 0x0c;
+		break;
+	case GUARD_INTERVAL_1_8:
+		edi |= 0x08;
+		break;
+	case GUARD_INTERVAL_1_16:
+		edi |= 0x04;
+		break;
+	case GUARD_INTERVAL_1_32:
+		break;
+	default:
+		v22 |= 2;
+	}
+
+	ebx = 0;
+	ebp = 0;
+	v20 = 0;
+	v1E = 0;
+	v16 = 0;
+	v14 = 0;
+	v12 = 0;
+	v10 = 0;
+	v0E = 0;
+
+	switch (fep->u.ofdm.hierarchy_information) {
+	case HIERARCHY_1:
+		edi |= 0x40;
+		if (s->chip_rev == DRXD_FW_B1)
+			break;
+		rc = WR16(s, 0x1c10047, 1);
+		if (rc < 0)
+			goto exit_rc;
+		rc = WR16(s, 0x2010012, 1);
+		if (rc < 0)
+			goto exit_rc;
+		ebx = 0x19f;
+		ebp = 0x1fb;
+		v20 = 0x0c0;
+		v1E = 0x195;
+		v16 = 0x1d6;
+		v14 = 0x1ef;
+		v12 = 4;
+		v10 = 5;
+		v0E = 5;
+		break;
+	case HIERARCHY_2:
+		edi |= 0x80;
+		if (s->chip_rev == DRXD_FW_B1)
+			break;
+		rc = WR16(s, 0x1c10047, 2);
+		if (rc < 0)
+			goto exit_rc;
+		rc = WR16(s, 0x2010012, 2);
+		if (rc < 0)
+			goto exit_rc;
+		ebx = 0x08f;
+		ebp = 0x12f;
+		v20 = 0x0c0;
+		v1E = 0x11e;
+		v16 = 0x1d6;
+		v14 = 0x15e;
+		v12 = 4;
+		v10 = 5;
+		v0E = 5;
+		break;
+	case HIERARCHY_4:
+		edi |= 0xc0;
+		if (s->chip_rev == DRXD_FW_B1)
+			break;
+		rc = WR16(s, 0x1c10047, 3);
+		if (rc < 0)
+			goto exit_rc;
+		rc = WR16(s, 0x2010012, 3);
+		if (rc < 0)
+			goto exit_rc;
+		ebx = 0x14d;
+		ebp = 0x197;
+		v20 = 0x0c0;
+		v1E = 0x1ce;
+		v16 = 0x1d6;
+		v14 = 0x11a;
+		v12 = 4;
+		v10 = 6;
+		v0E = 5;
+		break;
+	default:
+		v22 |= 8;
+		if (s->chip_rev == DRXD_FW_B1)
+			break;
+		rc = WR16(s, 0x1c10047, 0);
+		if (rc < 0)
+			goto exit_rc;
+		rc = WR16(s, 0x2010012, 0);
+		if (rc < 0)
+			goto exit_rc;
+		//              QPSK    QAM16   QAM64
+		ebx = 0x19f;	//                 62
+		ebp = 0x1fb;	//                 15
+		v20 = 0x16a;	//  62
+		v1E = 0x195;	//         62
+		v16 = 0x1bb;	//  15
+		v14 = 0x1ef;	//         15
+		v12 = 5;	//  16
+		v10 = 5;	//         16
+		v0E = 5;	//                 16
+	}
+
+	switch (fep->u.ofdm.constellation) {
+	default:
+		v22 |= 4;
+	case QPSK:
+		if (s->chip_rev == DRXD_FW_B1)
+			break;
+
+		rc = WR16(s, 0x1c10046, 0);
+		if (rc < 0)
+			goto exit_rc;
+		rc = WR16(s, 0x2010011, 0);
+		if (rc < 0)
+			goto exit_rc;
+		rc = WR16(s, 0x201001a, 0x10);
+		if (rc < 0)
+			goto exit_rc;
+		rc = WR16(s, 0x201001b, 0);
+		if (rc < 0)
+			goto exit_rc;
+		rc = WR16(s, 0x201001c, 0);
+		if (rc < 0)
+			goto exit_rc;
+		rc = WR16(s, 0x1c10062, v20);
+		if (rc < 0)
+			goto exit_rc;
+		rc = WR16(s, 0x1c1002a, v1C);
+		if (rc < 0)
+			goto exit_rc;
+		rc = WR16(s, 0x1c10015, v16);
+		if (rc < 0)
+			goto exit_rc;
+		rc = WR16(s, 0x1c10016, v12);
+		if (rc < 0)
+			goto exit_rc;
+		break;
+	case QAM_16:
+		edi |= 0x10;
+		if (s->chip_rev == DRXD_FW_B1)
+			break;
+
+		rc = WR16(s, 0x1c10046, 1);
+		if (rc < 0)
+			goto exit_rc;
+		rc = WR16(s, 0x2010011, 1);
+		if (rc < 0)
+			goto exit_rc;
+		rc = WR16(s, 0x201001a, 0x10);
+		if (rc < 0)
+			goto exit_rc;
+		rc = WR16(s, 0x201001b, 4);
+		if (rc < 0)
+			goto exit_rc;
+		rc = WR16(s, 0x201001c, 0);
+		if (rc < 0)
+			goto exit_rc;
+		rc = WR16(s, 0x1c10062, v1E);
+		if (rc < 0)
+			goto exit_rc;
+		rc = WR16(s, 0x1c1002a, v1A);
+		if (rc < 0)
+			goto exit_rc;
+		rc = WR16(s, 0x1c10015, v14);
+		if (rc < 0)
+			goto exit_rc;
+		rc = WR16(s, 0x1c10016, v10);
+		if (rc < 0)
+			goto exit_rc;
+		break;
+	case QAM_64:
+		edi |= 0x20;
+		rc = WR16(s, 0x1c10046, 2);
+		if (rc < 0)
+			goto exit_rc;
+		rc = WR16(s, 0x2010011, 2);
+		if (rc < 0)
+			goto exit_rc;
+		rc = WR16(s, 0x201001a, 0x20);
+		if (rc < 0)
+			goto exit_rc;
+		rc = WR16(s, 0x201001b, 8);
+		if (rc < 0)
+			goto exit_rc;
+		rc = WR16(s, 0x201001c, 2);
+		if (rc < 0)
+			goto exit_rc;
+		rc = WR16(s, 0x1c10062, ebx);
+		if (rc < 0)
+			goto exit_rc;
+		rc = WR16(s, 0x1c1002a, v18);
+		if (rc < 0)
+			goto exit_rc;
+		rc = WR16(s, 0x1c10015, ebp);
+		if (rc < 0)
+			goto exit_rc;
+		rc = WR16(s, 0x1c10016, v0E);
+		if (rc < 0)
+			goto exit_rc;
+		break;
+	}
+
+	if (s->config.s20d24 == 1) {
+		rc = WR16(s, 0x2010013, 0);
+	} else {
+		rc = WR16(s, 0x2010013, 1);
+		edi |= 0x1000;
+	}
+
+	switch (fep->u.ofdm.code_rate_HP) {
+	default:
+		v22 |= 0x10;
+	case FEC_1_2:
+		if (s->chip_rev == DRXD_FW_B1)
+			break;
+		rc = WR16(s, 0x2090011, 0);
+		break;
+	case FEC_2_3:
+		edi |= 0x200;
+		if (s->chip_rev == DRXD_FW_B1)
+			break;
+		rc = WR16(s, 0x2090011, 1);
+		break;
+	case FEC_3_4:
+		edi |= 0x400;
+		if (s->chip_rev == DRXD_FW_B1)
+			break;
+		rc = WR16(s, 0x2090011, 2);
+		break;
+	case FEC_5_6:		/* 5 */
+		edi |= 0x600;
+		if (s->chip_rev == DRXD_FW_B1)
+			break;
+		rc = WR16(s, 0x2090011, 3);
+		break;
+	case FEC_7_8:		/* 7 */
+		edi |= 0x800;
+		if (s->chip_rev == DRXD_FW_B1)
+			break;
+		rc = WR16(s, 0x2090011, 4);
+		break;
+	};
+	if (rc < 0)
+		goto exit_rc;
+
+	switch (fep->u.ofdm.bandwidth) {
+	default:
+		rc = -EINVAL;
+		goto exit_rc;
+	case BANDWIDTH_8_MHZ:	/* 0 */
+	case BANDWIDTH_AUTO:
+		rc = WR16(s, 0x0c2003f, 0x32);
+		s->bandwidth_parm = ebx = 0x8b8249;	// 9142857
+		edx = 0;
+		break;
+	case BANDWIDTH_7_MHZ:
+		rc = WR16(s, 0x0c2003f, 0x3b);
+		s->bandwidth_parm = ebx = 0x7a1200;	// 8000000
+		edx = 0x4807;
+		break;
+	case BANDWIDTH_6_MHZ:
+		rc = WR16(s, 0x0c2003f, 0x47);
+		s->bandwidth_parm = ebx = 0x68a1b6;	// 6857142
+		edx = 0x0f07;
+		break;
+	};
+
+	if (rc < 0)
+		goto exit_rc;
+
+	rc = WR16(s, 0x08200ec, edx);
+	if (rc < 0)
+		goto exit_rc;
+
+	rc = RD16(s, 0x0820050);
+	if (rc < 0)
+		goto exit_rc;
+	rc = WR16(s, 0x0820050, rc);
+
+	{
+		/* Configure bandwidth specific factor */
+		ebx = div64_u64(((u64) (s->f_osc) << 21) + (ebx >> 1),
+				     (u64)ebx) - 0x800000;
+		EXIT_RC(WR16(s, 0x0c50010, ebx & 0xffff));
+		EXIT_RC(WR16(s, 0x0c50011, ebx >> 16));
+
+		/* drx397xD oscillator calibration */
+		ebx = div64_u64(((u64) (s->config.f_if + df_tuner) << 28) +
+				     (s->f_osc >> 1), (u64)s->f_osc);
+	}
+	ebx &= 0xfffffff;
+	if (fep->inversion == INVERSION_ON)
+		ebx = 0x10000000 - ebx;
+
+	EXIT_RC(WR16(s, 0x0c30010, ebx & 0xffff));
+	EXIT_RC(WR16(s, 0x0c30011, ebx >> 16));
+
+	EXIT_RC(WR16(s, 0x0800000, 1));
+	EXIT_RC(RD16(s, 0x0800000));
+
+
+	EXIT_RC(SC_WaitForReady(s));
+	EXIT_RC(WR16(s, 0x0820042, 0));
+	EXIT_RC(WR16(s, 0x0820041, v22));
+	EXIT_RC(WR16(s, 0x0820040, edi));
+	EXIT_RC(SC_SendCommand(s, 3));
+
+	rc = RD16(s, 0x0800000);
+
+	SC_WaitForReady(s);
+	WR16(s, 0x0820042, 0);
+	WR16(s, 0x0820041, 1);
+	WR16(s, 0x0820040, 1);
+	SC_SendCommand(s, 1);
+
+//      rc = WR16(s, 0x2150000, 1);
+//      if (rc < 0) goto exit_rc;
+
+	rc = WR16(s, 0x2150000, 2);
+	rc = WR16(s, 0x2150016, a);
+	rc = WR16(s, 0x2150010, 4);
+	rc = WR16(s, 0x2150036, 0);
+	rc = WR16(s, 0x2150000, 1);
+	s->config.d60 = 2;
+      exit_rc:
+	return rc;
+}
+
+/*******************************************************************************
+ * DVB interface
+ ******************************************************************************/
+
+static int drx397x_init(struct dvb_frontend *fe)
+{
+	struct drx397xD_state *s = fe->demodulator_priv;
+	int rc;
+
+	pr_debug("%s\n", __FUNCTION__);
+
+	s->config.rfagc.d00 = 2;	/* 0x7c */
+	s->config.rfagc.w04 = 0;
+	s->config.rfagc.w06 = 0x3ff;
+
+	s->config.ifagc.d00 = 0;	/* 0x68 */
+	s->config.ifagc.w04 = 0;
+	s->config.ifagc.w06 = 140;
+	s->config.ifagc.w08 = 0;
+	s->config.ifagc.w0A = 0x3ff;
+	s->config.ifagc.w0C = 0x388;
+
+	/* for signal strenght calculations */
+	s->config.ss76 = 820;
+	s->config.ss78 = 2200;
+	s->config.ss7A = 150;
+
+	/* HI_CfgCommand */
+	s->config.w50 = 4;
+	s->config.w52 = 9;	// 0xf;
+
+	s->config.f_if = 42800000;	/* d14: intermediate frequency [Hz]     */
+	s->config.f_osc = 48000;	/* s66 : oscillator frequency [kHz]     */
+	s->config.w92 = 12000;	// 20000;
+
+	s->config.w9C = 0x000e;
+	s->config.w9E = 0x0000;
+
+	/* ConfigureMPEGOutput params */
+	s->config.wA0 = 4;
+	s->config.w98 = 1;	// 0;
+	s->config.w9A = 1;
+
+	/* get chip revision */
+	rc = RD16(s, 0x2410019);
+	if (rc < 0)
+		return -ENODEV;
+
+	if (rc == 0) {
+		printk(KERN_INFO "%s: chip revision A2\n", mod_name);
+		rc = drx_load_fw(s, DRXD_FW_A2);
+	} else {
+
+		rc = (rc >> 12) - 3;
+		switch (rc) {
+		case 1:
+			s->flags |= F_SET_0D4h;
+		case 0:
+		case 4:
+			s->flags |= F_SET_0D0h;
+			break;
+		case 2:
+		case 5:
+			break;
+		case 3:
+			s->flags |= F_SET_0D4h;
+			break;
+		default:
+			return -ENODEV;
+		};
+		printk(KERN_INFO "%s: chip revision B1.%d\n", mod_name, rc);
+		rc = drx_load_fw(s, DRXD_FW_B1);
+	}
+	if (rc < 0)
+		goto error;
+
+	rc = WR16(s, 0x0420033, 0x3973);
+	if (rc < 0)
+		goto error;
+
+	rc = HI_Command(s, 2);
+
+	msleep(1);
+
+	if (s->chip_rev == DRXD_FW_A2) {
+		rc = WR16(s, 0x043012d, 0x47F);
+		if (rc < 0)
+			goto error;
+	}
+	rc = WR16_E0(s, 0x0400000, 0);
+	if (rc < 0)
+		goto error;
+
+	if (s->config.w92 > 20000 || s->config.w92 % 4000) {
+		printk(KERN_ERR "%s: invalid osc frequency\n", mod_name);
+		rc = -1;
+		goto error;
+	}
+
+	rc = WR16(s, 0x2410010, 1);
+	if (rc < 0)
+		goto error;
+	rc = WR16(s, 0x2410011, 0x15);
+	if (rc < 0)
+		goto error;
+	rc = WR16(s, 0x2410012, s->config.w92 / 4000);
+	if (rc < 0)
+		goto error;
+#ifdef ORIG_FW
+	rc = WR16(s, 0x2410015, 2);
+	if (rc < 0)
+		goto error;
+#endif
+	rc = WR16(s, 0x2410017, 0x3973);
+	if (rc < 0)
+		goto error;
+
+	s->f_osc = s->config.f_osc * 1000;	/* initial estimator */
+
+	s->config.w56 = 1;
+
+	rc = HI_CfgCommand(s);
+	if (rc < 0)
+		goto error;
+
+	rc = write_fw(s, DRXD_InitAtomicRead);
+	if (rc < 0)
+		goto error;
+
+	if (s->chip_rev == DRXD_FW_A2) {
+		rc = WR16(s, 0x2150013, 0);
+		if (rc < 0)
+			goto error;
+	}
+
+	rc = WR16_E0(s, 0x0400002, 0);
+	if (rc < 0)
+		goto error;
+	rc = WR16(s, 0x0400002, 0);
+	if (rc < 0)
+		goto error;
+
+	if (s->chip_rev == DRXD_FW_A2) {
+		rc = write_fw(s, DRXD_ResetCEFR);
+		if (rc < 0)
+			goto error;
+	}
+	rc = write_fw(s, DRXD_microcode);
+	if (rc < 0)
+		goto error;
+
+	s->config.w9C = 0x0e;
+	if (s->flags & F_SET_0D0h) {
+		s->config.w9C = 0;
+		rc = RD16(s, 0x0c20010);
+		if (rc < 0)
+			goto write_DRXD_InitFE_1;
+
+		rc &= ~0x1000;
+		rc = WR16(s, 0x0c20010, rc);
+		if (rc < 0)
+			goto write_DRXD_InitFE_1;
+
+		rc = RD16(s, 0x0c20011);
+		if (rc < 0)
+			goto write_DRXD_InitFE_1;
+
+		rc &= ~0x8;
+		rc = WR16(s, 0x0c20011, rc);
+		if (rc < 0)
+			goto write_DRXD_InitFE_1;
+
+		rc = WR16(s, 0x0c20012, 1);
+	}
+
+      write_DRXD_InitFE_1:
+
+	rc = write_fw(s, DRXD_InitFE_1);
+	if (rc < 0)
+		goto error;
+
+	rc = 1;
+	if (s->chip_rev == DRXD_FW_B1) {
+		if (s->flags & F_SET_0D0h)
+			rc = 0;
+	} else {
+		if (s->flags & F_SET_0D0h)
+			rc = 4;
+	}
+
+	rc = WR16(s, 0x0C20012, rc);
+	if (rc < 0)
+		goto error;
+
+	rc = WR16(s, 0x0C20013, s->config.w9E);
+	if (rc < 0)
+		goto error;
+	rc = WR16(s, 0x0C20015, s->config.w9C);
+	if (rc < 0)
+		goto error;
+
+	rc = write_fw(s, DRXD_InitFE_2);
+	if (rc < 0)
+		goto error;
+	rc = write_fw(s, DRXD_InitFT);
+	if (rc < 0)
+		goto error;
+	rc = write_fw(s, DRXD_InitCP);
+	if (rc < 0)
+		goto error;
+	rc = write_fw(s, DRXD_InitCE);
+	if (rc < 0)
+		goto error;
+	rc = write_fw(s, DRXD_InitEQ);
+	if (rc < 0)
+		goto error;
+	rc = write_fw(s, DRXD_InitEC);
+	if (rc < 0)
+		goto error;
+	rc = write_fw(s, DRXD_InitSC);
+	if (rc < 0)
+		goto error;
+
+	rc = SetCfgIfAgc(s, &s->config.ifagc);
+	if (rc < 0)
+		goto error;
+
+	rc = SetCfgRfAgc(s, &s->config.rfagc);
+	if (rc < 0)
+		goto error;
+
+	rc = ConfigureMPEGOutput(s, 1);
+	rc = WR16(s, 0x08201fe, 0x0017);
+	rc = WR16(s, 0x08201ff, 0x0101);
+
+	s->config.d5C = 0;
+	s->config.d60 = 1;
+	s->config.d48 = 1;
+      error:
+	return rc;
+}
+
+static int drx397x_get_frontend(struct dvb_frontend *fe,
+				struct dvb_frontend_parameters *params)
+{
+	return 0;
+}
+
+static int drx397x_set_frontend(struct dvb_frontend *fe,
+				struct dvb_frontend_parameters *params)
+{
+	struct drx397xD_state *s = fe->demodulator_priv;
+
+	s->config.s20d24 = 1;	// 0;
+	return drx_tune(s, params);
+}
+
+static int drx397x_get_tune_settings(struct dvb_frontend *fe,
+				     struct dvb_frontend_tune_settings
+				     *fe_tune_settings)
+{
+	fe_tune_settings->min_delay_ms = 10000;
+	fe_tune_settings->step_size = 0;
+	fe_tune_settings->max_drift = 0;
+	return 0;
+}
+
+static int drx397x_read_status(struct dvb_frontend *fe, fe_status_t * status)
+{
+	struct drx397xD_state *s = fe->demodulator_priv;
+	int lockstat;
+
+	GetLockStatus(s, &lockstat);
+	/* TODO */
+//      if (lockstat & 1)
+//      CorrectSysClockDeviation(s);
+
+	*status = 0;
+	if (lockstat & 2) {
+		CorrectSysClockDeviation(s);
+		ConfigureMPEGOutput(s, 1);
+		*status = FE_HAS_LOCK | FE_HAS_SYNC | FE_HAS_VITERBI;
+	}
+	if (lockstat & 4) {
+		*status |= FE_HAS_CARRIER | FE_HAS_SIGNAL;
+	}
+
+	return 0;
+}
+
+static int drx397x_read_ber(struct dvb_frontend *fe, unsigned int *ber)
+{
+	*ber = 0;
+	return 0;
+}
+
+static int drx397x_read_snr(struct dvb_frontend *fe, u16 * snr)
+{
+	*snr = 0;
+	return 0;
+}
+
+static int drx397x_read_signal_strength(struct dvb_frontend *fe, u16 * strength)
+{
+	struct drx397xD_state *s = fe->demodulator_priv;
+	int rc;
+
+	if (s->config.ifagc.d00 == 2) {
+		*strength = 0xffff;
+		return 0;
+	}
+	rc = RD16(s, 0x0c20035);
+	if (rc < 0) {
+		*strength = 0;
+		return 0;
+	}
+	rc &= 0x3ff;
+	/* Signal strength is calculated using the following formula:
+	 *
+	 * a = 2200 * 150 / (2200 + 150);
+	 * a = a * 3300 /  (a + 820);
+	 * b = 2200 * 3300 / (2200 + 820);
+	 * c = (((b-a) * rc) >> 10  + a) << 4;
+	 * strength = ~c & 0xffff;
+	 *
+	 * The following does the same but with less rounding errors:
+	 */
+	*strength = ~(7720 + (rc * 30744 >> 10));
+	return 0;
+}
+
+static int drx397x_read_ucblocks(struct dvb_frontend *fe,
+				 unsigned int *ucblocks)
+{
+	*ucblocks = 0;
+	return 0;
+}
+
+static int drx397x_sleep(struct dvb_frontend *fe)
+{
+	return 0;
+}
+
+static void drx397x_release(struct dvb_frontend *fe)
+{
+	struct drx397xD_state *s = fe->demodulator_priv;
+	printk(KERN_INFO "%s: release demodulator\n", mod_name);
+	if (s) {
+		drx_release_fw(s);
+		kfree(s);
+	}
+
+}
+
+static struct dvb_frontend_ops drx397x_ops = {
+
+	.info = {
+		 .name			= "Micronas DRX397xD DVB-T Frontend",
+		 .type			= FE_OFDM,
+		 .frequency_min		= 47125000,
+		 .frequency_max		= 855250000,
+		 .frequency_stepsize	= 166667,
+		 .frequency_tolerance	= 0,
+		 .caps =					/* 0x0C01B2EAE */
+			 FE_CAN_FEC_1_2			|	// = 0x2,
+			 FE_CAN_FEC_2_3			|	// = 0x4,
+			 FE_CAN_FEC_3_4			|	// = 0x8,
+			 FE_CAN_FEC_5_6			|	// = 0x20,
+			 FE_CAN_FEC_7_8			|	// = 0x80,
+			 FE_CAN_FEC_AUTO		|	// = 0x200,
+			 FE_CAN_QPSK			|	// = 0x400,
+			 FE_CAN_QAM_16			|	// = 0x800,
+			 FE_CAN_QAM_64			|	// = 0x2000,
+			 FE_CAN_QAM_AUTO		|	// = 0x10000,
+			 FE_CAN_TRANSMISSION_MODE_AUTO	|	// = 0x20000,
+			 FE_CAN_GUARD_INTERVAL_AUTO	|	// = 0x80000,
+			 FE_CAN_HIERARCHY_AUTO		|	// = 0x100000,
+			 FE_CAN_RECOVER			|	// = 0x40000000,
+			 FE_CAN_MUTE_TS				// = 0x80000000
+	 },
+
+	.release = drx397x_release,
+	.init = drx397x_init,
+	.sleep = drx397x_sleep,
+
+	.set_frontend = drx397x_set_frontend,
+	.get_tune_settings = drx397x_get_tune_settings,
+	.get_frontend = drx397x_get_frontend,
+
+	.read_status = drx397x_read_status,
+	.read_snr = drx397x_read_snr,
+	.read_signal_strength = drx397x_read_signal_strength,
+	.read_ber = drx397x_read_ber,
+	.read_ucblocks = drx397x_read_ucblocks,
+};
+
+struct dvb_frontend *drx397xD_attach(const struct drx397xD_config *config,
+				     struct i2c_adapter *i2c)
+{
+	struct drx397xD_state *s = NULL;
+
+	/* allocate memory for the internal state */
+	s = kzalloc(sizeof(struct drx397xD_state), GFP_KERNEL);
+	if (s == NULL)
+		goto error;
+
+	/* setup the state */
+	s->i2c = i2c;
+	memcpy(&s->config, config, sizeof(struct drx397xD_config));
+
+	/* check if the demod is there */
+	if (RD16(s, 0x2410019) < 0)
+		goto error;
+
+	/* create dvb_frontend */
+	memcpy(&s->frontend.ops, &drx397x_ops, sizeof(struct dvb_frontend_ops));
+	s->frontend.demodulator_priv = s;
+
+	return &s->frontend;
+      error:
+	kfree(s);
+	return NULL;
+}
+
+MODULE_DESCRIPTION("Micronas DRX397xD DVB-T Frontend");
+MODULE_AUTHOR("Henk Vergonet");
+MODULE_LICENSE("GPL");
+
+EXPORT_SYMBOL(drx397xD_attach);
diff --git a/drivers/media/dvb/frontends/drx397xD.h b/drivers/media/dvb/frontends/drx397xD.h
new file mode 100644
index 000000000000..ddc7a07971b7
--- /dev/null
+++ b/drivers/media/dvb/frontends/drx397xD.h
@@ -0,0 +1,130 @@
+/*
+ *  Driver for Micronas DVB-T drx397xD demodulator
+ *
+ *  Copyright (C) 2007 Henk vergonet <Henk.Vergonet@gmail.com>
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.=
+ */
+
+#ifndef _DRX397XD_H_INCLUDED
+#define _DRX397XD_H_INCLUDED
+
+#include <linux/dvb/frontend.h>
+
+#define DRX_F_STEPSIZE	166667
+#define DRX_F_OFFSET	36000000
+
+#define I2C_ADR_C0(x) \
+(	(u32)cpu_to_le32( \
+		(u32)( \
+			(((u32)(x) & (u32)0x000000ffUL)      ) | \
+			(((u32)(x) & (u32)0x0000ff00UL) << 16) | \
+			(((u32)(x) & (u32)0x0fff0000UL) >>  8) | \
+			 (	     (u32)0x00c00000UL)          \
+		      )) \
+)
+
+#define I2C_ADR_E0(x) \
+(	(u32)cpu_to_le32( \
+		(u32)( \
+			(((u32)(x) & (u32)0x000000ffUL)      ) | \
+			(((u32)(x) & (u32)0x0000ff00UL) << 16) | \
+			(((u32)(x) & (u32)0x0fff0000UL) >>  8) | \
+			 (	     (u32)0x00e00000UL)          \
+		      )) \
+)
+
+struct drx397xD_CfgRfAgc	/* 0x7c */
+{
+	int d00;	/* 2 */
+	u16 w04;
+	u16 w06;
+};
+
+struct drx397xD_CfgIfAgc	/* 0x68 */
+{
+	int d00;	/* 0 */
+	u16 w04;	/* 0 */
+	u16 w06;
+	u16 w08;
+	u16 w0A;
+	u16 w0C;
+};
+
+struct drx397xD_s20 {
+	int d04;
+	u32 d18;
+	u32 d1C;
+	u32 d20;
+	u32 d14;
+	u32 d24;
+	u32 d0C;
+	u32 d08;
+};
+
+struct drx397xD_config
+{
+	/* demodulator's I2C address */
+	u8	demod_address;		/* 0x0f */
+
+	struct drx397xD_CfgIfAgc  ifagc;  /* 0x68 */
+	struct drx397xD_CfgRfAgc  rfagc;  /* 0x7c */
+	u32	s20d24;
+
+	/* HI_CfgCommand parameters */
+	u16	w50, w52, /* w54, */ w56;
+
+	int	d5C;
+	int	d60;
+	int	d48;
+	int	d28;
+
+	u32	f_if;	/* d14: intermediate frequency [Hz]		*/
+			/*	36000000 on Cinergy 2400i DT		*/
+			/*	42800000 on Pinnacle Hybrid PRO 330e	*/
+
+	u16	f_osc;	/* s66: 48000 oscillator frequency [kHz]	*/
+
+	u16	w92;	/* 20000 */
+
+	u16	wA0;
+	u16	w98;
+	u16	w9A;
+
+	u16	w9C;	/* 0xe0 */
+	u16	w9E;	/* 0x00 */
+
+	/* used for signal strength calculations in
+	   drx397x_read_signal_strength
+	*/
+	u16	ss78;	// 2200
+	u16	ss7A;	// 150
+	u16	ss76;	// 820
+};
+
+#if defined(CONFIG_DVB_DRX397XD) || (defined(CONFIG_DVB_DRX397XD_MODULE) && defined(MODULE))
+extern struct dvb_frontend* drx397xD_attach(const struct drx397xD_config *config,
+					   struct i2c_adapter *i2c);
+#else
+static inline struct dvb_frontend* drx397xD_attach(const struct drx397xD_config *config,
+					   struct i2c_adapter *i2c)
+{
+	printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __FUNCTION__);
+	return NULL;
+}
+#endif /* CONFIG_DVB_DRX397XD */
+
+#endif /* _DRX397XD_H_INCLUDED */
diff --git a/drivers/media/dvb/frontends/drx397xD_fw.h b/drivers/media/dvb/frontends/drx397xD_fw.h
new file mode 100644
index 000000000000..01de02a81cd4
--- /dev/null
+++ b/drivers/media/dvb/frontends/drx397xD_fw.h
@@ -0,0 +1,40 @@
+/*
+ * Firmware definitions for Micronas drx397xD
+ *
+ * Copyright (C) 2007 Henk Vergonet <Henk.Vergonet@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#ifdef _FW_ENTRY
+	_FW_ENTRY("drx397xD.A2.fw",	DRXD_FW_A2 = 0		),
+	_FW_ENTRY("drx397xD.B1.fw",	DRXD_FW_B1		),
+#undef _FW_ENTRY
+#endif /* _FW_ENTRY */
+
+#ifdef _BLOB_ENTRY
+	_BLOB_ENTRY("InitAtomicRead",	DRXD_InitAtomicRead = 0	),
+	_BLOB_ENTRY("InitCE",		DRXD_InitCE		),
+	_BLOB_ENTRY("InitCP",		DRXD_InitCP		),
+	_BLOB_ENTRY("InitEC",		DRXD_InitEC		),
+	_BLOB_ENTRY("InitEQ",		DRXD_InitEQ		),
+	_BLOB_ENTRY("InitFE_1",		DRXD_InitFE_1		),
+	_BLOB_ENTRY("InitFE_2",		DRXD_InitFE_2		),
+	_BLOB_ENTRY("InitFT",		DRXD_InitFT		),
+	_BLOB_ENTRY("InitSC",		DRXD_InitSC		),
+	_BLOB_ENTRY("ResetCEFR",	DRXD_ResetCEFR		),
+	_BLOB_ENTRY("ResetECRAM",	DRXD_ResetECRAM		),
+	_BLOB_ENTRY("microcode",	DRXD_microcode		),
+#undef _BLOB_ENTRY
+#endif /* _BLOB_ENTRY */
diff --git a/drivers/media/dvb/frontends/z0194a.h b/drivers/media/dvb/frontends/z0194a.h
new file mode 100644
index 000000000000..d2876d2e1769
--- /dev/null
+++ b/drivers/media/dvb/frontends/z0194a.h
@@ -0,0 +1,97 @@
+/* z0194a.h Sharp z0194a tuner support
+*
+* Copyright (C) 2008 Igor M. Liplianin (liplianin@me.by)
+*
+*	This program is free software; you can redistribute it and/or modify it
+*	under the terms of the GNU General Public License as published by the
+*	Free Software Foundation, version 2.
+*
+* see Documentation/dvb/README.dvb-usb for more information
+*/
+
+#ifndef Z0194A
+#define Z0194A
+
+static int sharp_z0194a__set_symbol_rate(struct dvb_frontend *fe,
+					 u32 srate, u32 ratio)
+{
+	u8 aclk = 0;
+	u8 bclk = 0;
+
+	if (srate < 1500000) {
+		aclk = 0xb7; bclk = 0x47; }
+	else if (srate < 3000000) {
+		aclk = 0xb7; bclk = 0x4b; }
+	else if (srate < 7000000) {
+		aclk = 0xb7; bclk = 0x4f; }
+	else if (srate < 14000000) {
+		aclk = 0xb7; bclk = 0x53; }
+	else if (srate < 30000000) {
+		aclk = 0xb6; bclk = 0x53; }
+	else if (srate < 45000000) {
+		aclk = 0xb4; bclk = 0x51; }
+
+	stv0299_writereg(fe, 0x13, aclk);
+	stv0299_writereg(fe, 0x14, bclk);
+	stv0299_writereg(fe, 0x1f, (ratio >> 16) & 0xff);
+	stv0299_writereg(fe, 0x20, (ratio >> 8) & 0xff);
+	stv0299_writereg(fe, 0x21, (ratio) & 0xf0);
+
+	return 0;
+}
+
+static u8 sharp_z0194a__inittab[] = {
+	0x01, 0x15,
+	0x02, 0x00,
+	0x03, 0x00,
+	0x04, 0x7d,   /* F22FR = 0x7d, F22 = f_VCO / 128 / 0x7d = 22 kHz */
+	0x05, 0x35,   /* I2CT = 0, SCLT = 1, SDAT = 1 */
+	0x06, 0x40,   /* DAC not used, set to high impendance mode */
+	0x07, 0x00,   /* DAC LSB */
+	0x08, 0x40,   /* DiSEqC off, LNB power on OP2/LOCK pin on */
+	0x09, 0x00,   /* FIFO */
+	0x0c, 0x51,   /* OP1 ctl = Normal, OP1 val = 1 (LNB Power ON) */
+	0x0d, 0x82,   /* DC offset compensation = ON, beta_agc1 = 2 */
+	0x0e, 0x23,   /* alpha_tmg = 2, beta_tmg = 3 */
+	0x10, 0x3f,   /* AGC2  0x3d */
+	0x11, 0x84,
+	0x12, 0xb9,
+	0x15, 0xc9,   /* lock detector threshold */
+	0x16, 0x00,
+	0x17, 0x00,
+	0x18, 0x00,
+	0x19, 0x00,
+	0x1a, 0x00,
+	0x1f, 0x50,
+	0x20, 0x00,
+	0x21, 0x00,
+	0x22, 0x00,
+	0x23, 0x00,
+	0x28, 0x00,  /* out imp: normal  out type: parallel FEC mode:0 */
+	0x29, 0x1e,  /* 1/2 threshold */
+	0x2a, 0x14,  /* 2/3 threshold */
+	0x2b, 0x0f,  /* 3/4 threshold */
+	0x2c, 0x09,  /* 5/6 threshold */
+	0x2d, 0x05,  /* 7/8 threshold */
+	0x2e, 0x01,
+	0x31, 0x1f,  /* test all FECs */
+	0x32, 0x19,  /* viterbi and synchro search */
+	0x33, 0xfc,  /* rs control */
+	0x34, 0x93,  /* error control */
+	0x0f, 0x52,
+	0xff, 0xff
+};
+
+static struct stv0299_config sharp_z0194a_config = {
+	.demod_address = 0x68,
+	.inittab = sharp_z0194a__inittab,
+	.mclk = 88000000UL,
+	.invert = 1,
+	.skip_reinit = 0,
+	.lock_output = STV0299_LOCKOUTPUT_1,
+	.volt13_op0_op1 = STV0299_VOLT13_OP1,
+	.min_delay_ms = 100,
+	.set_symbol_rate = sharp_z0194a__set_symbol_rate,
+};
+
+#endif
diff --git a/drivers/media/dvb/pluto2/pluto2.c b/drivers/media/dvb/pluto2/pluto2.c
index 1360403b88b6..a9653c63f4db 100644
--- a/drivers/media/dvb/pluto2/pluto2.c
+++ b/drivers/media/dvb/pluto2/pluto2.c
@@ -242,7 +242,7 @@ static int __devinit pluto_dma_map(struct pluto *pluto)
 	pluto->dma_addr = pci_map_single(pluto->pdev, pluto->dma_buf,
 			TS_DMA_BYTES, PCI_DMA_FROMDEVICE);
 
-	return pci_dma_mapping_error(pluto->dma_addr);
+	return pci_dma_mapping_error(pluto->pdev, pluto->dma_addr);
 }
 
 static void pluto_dma_unmap(struct pluto *pluto)
diff --git a/drivers/media/dvb/siano/smscoreapi.c b/drivers/media/dvb/siano/smscoreapi.c
index b4b8ed795c95..c5f45fed69dc 100644
--- a/drivers/media/dvb/siano/smscoreapi.c
+++ b/drivers/media/dvb/siano/smscoreapi.c
@@ -110,12 +110,12 @@ struct smscore_registry_entry_t {
 	enum sms_device_type_st	type;
 };
 
-struct list_head g_smscore_notifyees;
-struct list_head g_smscore_devices;
-struct mutex g_smscore_deviceslock;
+static struct list_head g_smscore_notifyees;
+static struct list_head g_smscore_devices;
+static struct mutex g_smscore_deviceslock;
 
-struct list_head g_smscore_registry;
-struct mutex g_smscore_registrylock;
+static struct list_head g_smscore_registry;
+static struct mutex g_smscore_registrylock;
 
 static int default_mode = 4;
 
@@ -1187,7 +1187,7 @@ int smsclient_sendrequest(struct smscore_client_t *client,
 }
 
 
-int smscore_module_init(void)
+static int __init smscore_module_init(void)
 {
 	int rc = 0;
 
@@ -1209,7 +1209,7 @@ int smscore_module_init(void)
 	return rc;
 }
 
-void smscore_module_exit(void)
+static void __exit smscore_module_exit(void)
 {
 
 	kmutex_lock(&g_smscore_deviceslock);
diff --git a/drivers/media/dvb/siano/smsdvb.c b/drivers/media/dvb/siano/smsdvb.c
index 6f9c18563867..229274a14110 100644
--- a/drivers/media/dvb/siano/smsdvb.c
+++ b/drivers/media/dvb/siano/smsdvb.c
@@ -27,8 +27,8 @@
 
 DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr);
 
-struct list_head g_smsdvb_clients;
-struct mutex g_smsdvb_clientslock;
+static struct list_head g_smsdvb_clients;
+static struct mutex g_smsdvb_clientslock;
 
 static int smsdvb_onresponse(void *context, struct smscore_buffer_t *cb)
 {
diff --git a/drivers/media/dvb/ttpci/Kconfig b/drivers/media/dvb/ttpci/Kconfig
index 87c973ac668b..41b5a988b619 100644
--- a/drivers/media/dvb/ttpci/Kconfig
+++ b/drivers/media/dvb/ttpci/Kconfig
@@ -5,8 +5,6 @@ config TTPCI_EEPROM
 config DVB_AV7110
 	tristate "AV7110 cards"
 	depends on DVB_CORE && PCI && I2C
-	depends on HOTPLUG
-	select FW_LOADER if !DVB_AV7110_FIRMWARE
 	select TTPCI_EEPROM
 	select VIDEO_SAA7146_VV
 	depends on VIDEO_DEV	# dependencies of VIDEO_SAA7146_VV
@@ -127,14 +125,12 @@ config DVB_BUDGET_AV
 	depends on DVB_BUDGET_CORE && I2C
 	select VIDEO_SAA7146_VV
 	depends on VIDEO_DEV	# dependencies of VIDEO_SAA7146_VV
-	depends on HOTPLUG	# dependency of FW_LOADER
 	select DVB_PLL if !DVB_FE_CUSTOMISE
 	select DVB_STV0299 if !DVB_FE_CUSTOMISE
 	select DVB_TDA1004X if !DVB_FE_CUSTOMISE
 	select DVB_TDA10021 if !DVB_FE_CUSTOMISE
 	select DVB_TDA10023 if !DVB_FE_CUSTOMISE
 	select DVB_TUA6100 if !DVB_FE_CUSTOMISE
-	select FW_LOADER
 	help
 	  Support for simple SAA7146 based DVB cards
 	  (so called Budget- or Nova-PCI cards) without onboard
diff --git a/drivers/media/dvb/ttusb-dec/Kconfig b/drivers/media/dvb/ttusb-dec/Kconfig
index a23cc0aa17d3..d5f48a3102bd 100644
--- a/drivers/media/dvb/ttusb-dec/Kconfig
+++ b/drivers/media/dvb/ttusb-dec/Kconfig
@@ -1,8 +1,6 @@
 config DVB_TTUSB_DEC
 	tristate "Technotrend/Hauppauge USB DEC devices"
 	depends on DVB_CORE && USB && INPUT
-	depends on HOTPLUG	# due to FW_LOADER
-	select FW_LOADER
 	select CRC32
 	help
 	  Support for external USB adapters designed by Technotrend and
diff --git a/drivers/media/radio/dsbr100.c b/drivers/media/radio/dsbr100.c
index 4e3f83e4e48f..1ed88f3abe61 100644
--- a/drivers/media/radio/dsbr100.c
+++ b/drivers/media/radio/dsbr100.c
@@ -85,6 +85,7 @@
 #include <linux/input.h>
 #include <linux/videodev2.h>
 #include <media/v4l2-common.h>
+#include <media/v4l2-ioctl.h>
 #include <linux/usb.h>
 
 /*
@@ -444,14 +445,7 @@ static const struct file_operations usb_dsbr100_fops = {
 	.llseek		= no_llseek,
 };
 
-/* V4L2 interface */
-static struct video_device dsbr100_videodev_template =
-{
-	.owner		= THIS_MODULE,
-	.name		= "D-Link DSB-R 100",
-	.type		= VID_TYPE_TUNER,
-	.fops		= &usb_dsbr100_fops,
-	.release	= video_device_release,
+static const struct v4l2_ioctl_ops usb_dsbr100_ioctl_ops = {
 	.vidioc_querycap    = vidioc_querycap,
 	.vidioc_g_tuner     = vidioc_g_tuner,
 	.vidioc_s_tuner     = vidioc_s_tuner,
@@ -466,6 +460,14 @@ static struct video_device dsbr100_videodev_template =
 	.vidioc_s_input     = vidioc_s_input,
 };
 
+/* V4L2 interface */
+static struct video_device dsbr100_videodev_template = {
+	.name		= "D-Link DSB-R 100",
+	.fops		= &usb_dsbr100_fops,
+	.ioctl_ops 	= &usb_dsbr100_ioctl_ops,
+	.release	= video_device_release,
+};
+
 /* check if the device is present and register with v4l and
 usb if it is */
 static int usb_dsbr100_probe(struct usb_interface *intf,
diff --git a/drivers/media/radio/miropcm20-radio.c b/drivers/media/radio/miropcm20-radio.c
index 09fe6f1cdf14..7fd7ee2d32c1 100644
--- a/drivers/media/radio/miropcm20-radio.c
+++ b/drivers/media/radio/miropcm20-radio.c
@@ -23,6 +23,7 @@
 #include <linux/init.h>
 #include <linux/videodev.h>
 #include <media/v4l2-common.h>
+#include <media/v4l2-ioctl.h>
 #include "oss/aci.h"
 #include "miropcm20-rds-core.h"
 
@@ -228,9 +229,7 @@ static const struct file_operations pcm20_fops = {
 };
 
 static struct video_device pcm20_radio = {
-	.owner		= THIS_MODULE,
 	.name		= "Miro PCM 20 radio",
-	.type		= VID_TYPE_TUNER,
 	.fops           = &pcm20_fops,
 	.priv		= &pcm20_unit
 };
diff --git a/drivers/media/radio/radio-aimslab.c b/drivers/media/radio/radio-aimslab.c
index 1ec18ed1a733..eba9209b3024 100644
--- a/drivers/media/radio/radio-aimslab.c
+++ b/drivers/media/radio/radio-aimslab.c
@@ -36,6 +36,7 @@
 #include <asm/uaccess.h>	/* copy to/from user		*/
 #include <linux/videodev2.h>	/* kernel radio structs		*/
 #include <media/v4l2-common.h>
+#include <media/v4l2-ioctl.h>
 
 #include <linux/version.h>	/* for KERNEL_VERSION MACRO	*/
 #define RADIO_VERSION KERNEL_VERSION(0,0,2)
@@ -388,12 +389,7 @@ static const struct file_operations rtrack_fops = {
 	.llseek         = no_llseek,
 };
 
-static struct video_device rtrack_radio=
-{
-	.owner		= THIS_MODULE,
-	.name		= "RadioTrack radio",
-	.type		= VID_TYPE_TUNER,
-	.fops           = &rtrack_fops,
+static const struct v4l2_ioctl_ops rtrack_ioctl_ops = {
 	.vidioc_querycap    = vidioc_querycap,
 	.vidioc_g_tuner     = vidioc_g_tuner,
 	.vidioc_s_tuner     = vidioc_s_tuner,
@@ -408,6 +404,12 @@ static struct video_device rtrack_radio=
 	.vidioc_s_ctrl      = vidioc_s_ctrl,
 };
 
+static struct video_device rtrack_radio = {
+	.name		= "RadioTrack radio",
+	.fops           = &rtrack_fops,
+	.ioctl_ops 	= &rtrack_ioctl_ops,
+};
+
 static int __init rtrack_init(void)
 {
 	if(io==-1)
diff --git a/drivers/media/radio/radio-aztech.c b/drivers/media/radio/radio-aztech.c
index 46cdb549eac7..3fe5504428c5 100644
--- a/drivers/media/radio/radio-aztech.c
+++ b/drivers/media/radio/radio-aztech.c
@@ -33,6 +33,7 @@
 #include <asm/uaccess.h>	/* copy to/from user		*/
 #include <linux/videodev2.h>	/* kernel radio structs		*/
 #include <media/v4l2-common.h>
+#include <media/v4l2-ioctl.h>
 
 #include <linux/version.h>      /* for KERNEL_VERSION MACRO     */
 #define RADIO_VERSION KERNEL_VERSION(0,0,2)
@@ -352,12 +353,7 @@ static const struct file_operations aztech_fops = {
 	.llseek         = no_llseek,
 };
 
-static struct video_device aztech_radio=
-{
-	.owner		    = THIS_MODULE,
-	.name		    = "Aztech radio",
-	.type		    = VID_TYPE_TUNER,
-	.fops               = &aztech_fops,
+static const struct v4l2_ioctl_ops aztech_ioctl_ops = {
 	.vidioc_querycap    = vidioc_querycap,
 	.vidioc_g_tuner     = vidioc_g_tuner,
 	.vidioc_s_tuner     = vidioc_s_tuner,
@@ -372,6 +368,12 @@ static struct video_device aztech_radio=
 	.vidioc_s_ctrl      = vidioc_s_ctrl,
 };
 
+static struct video_device aztech_radio = {
+	.name		    = "Aztech radio",
+	.fops               = &aztech_fops,
+	.ioctl_ops 	    = &aztech_ioctl_ops,
+};
+
 module_param_named(debug,aztech_radio.debug, int, 0644);
 MODULE_PARM_DESC(debug,"activates debug info");
 
diff --git a/drivers/media/radio/radio-cadet.c b/drivers/media/radio/radio-cadet.c
index b14db53ea456..6166e726ed72 100644
--- a/drivers/media/radio/radio-cadet.c
+++ b/drivers/media/radio/radio-cadet.c
@@ -39,6 +39,7 @@
 #include <asm/uaccess.h>	/* copy to/from user		*/
 #include <linux/videodev2.h>	/* V4L2 API defs		*/
 #include <media/v4l2-common.h>
+#include <media/v4l2-ioctl.h>
 #include <linux/param.h>
 #include <linux/pnp.h>
 
@@ -569,12 +570,7 @@ static const struct file_operations cadet_fops = {
 	.llseek         = no_llseek,
 };
 
-static struct video_device cadet_radio=
-{
-	.owner		= THIS_MODULE,
-	.name		= "Cadet radio",
-	.type		= VID_TYPE_TUNER,
-	.fops           = &cadet_fops,
+static const struct v4l2_ioctl_ops cadet_ioctl_ops = {
 	.vidioc_querycap    = vidioc_querycap,
 	.vidioc_g_tuner     = vidioc_g_tuner,
 	.vidioc_s_tuner     = vidioc_s_tuner,
@@ -589,6 +585,12 @@ static struct video_device cadet_radio=
 	.vidioc_s_input     = vidioc_s_input,
 };
 
+static struct video_device cadet_radio = {
+	.name		= "Cadet radio",
+	.fops           = &cadet_fops,
+	.ioctl_ops 	= &cadet_ioctl_ops,
+};
+
 #ifdef CONFIG_PNP
 
 static struct pnp_device_id cadet_pnp_devices[] = {
diff --git a/drivers/media/radio/radio-gemtek-pci.c b/drivers/media/radio/radio-gemtek-pci.c
index de49be971480..36e754e3ffb2 100644
--- a/drivers/media/radio/radio-gemtek-pci.c
+++ b/drivers/media/radio/radio-gemtek-pci.c
@@ -46,6 +46,7 @@
 #include <linux/pci.h>
 #include <linux/videodev2.h>
 #include <media/v4l2-common.h>
+#include <media/v4l2-ioctl.h>
 #include <linux/errno.h>
 
 #include <linux/version.h>      /* for KERNEL_VERSION MACRO     */
@@ -374,11 +375,7 @@ static const struct file_operations gemtek_pci_fops = {
 	.llseek         = no_llseek,
 };
 
-static struct video_device vdev_template = {
-	.owner         = THIS_MODULE,
-	.name          = "Gemtek PCI Radio",
-	.type          = VID_TYPE_TUNER,
-	.fops          = &gemtek_pci_fops,
+static const struct v4l2_ioctl_ops gemtek_pci_ioctl_ops = {
 	.vidioc_querycap    = vidioc_querycap,
 	.vidioc_g_tuner     = vidioc_g_tuner,
 	.vidioc_s_tuner     = vidioc_s_tuner,
@@ -393,6 +390,12 @@ static struct video_device vdev_template = {
 	.vidioc_s_ctrl      = vidioc_s_ctrl,
 };
 
+static struct video_device vdev_template = {
+	.name          = "Gemtek PCI Radio",
+	.fops          = &gemtek_pci_fops,
+	.ioctl_ops     = &gemtek_pci_ioctl_ops,
+};
+
 static int __devinit gemtek_pci_probe( struct pci_dev *pci_dev, const struct pci_device_id *pci_id )
 {
 	struct gemtek_pci_card *card;
diff --git a/drivers/media/radio/radio-gemtek.c b/drivers/media/radio/radio-gemtek.c
index 81f6aeb1cd11..2b1a6221de6d 100644
--- a/drivers/media/radio/radio-gemtek.c
+++ b/drivers/media/radio/radio-gemtek.c
@@ -23,6 +23,7 @@
 #include <asm/io.h>		/* outb, outb_p			*/
 #include <asm/uaccess.h>	/* copy to/from user		*/
 #include <linux/videodev2.h>	/* kernel radio structs		*/
+#include <media/v4l2-ioctl.h>
 #include <media/v4l2-common.h>
 #include <linux/spinlock.h>
 
@@ -552,11 +553,7 @@ static int vidioc_s_audio(struct file *file, void *priv, struct v4l2_audio *a)
 	return 0;
 }
 
-static struct video_device gemtek_radio = {
-	.owner			= THIS_MODULE,
-	.name			= "GemTek Radio card",
-	.type			= VID_TYPE_TUNER,
-	.fops			= &gemtek_fops,
+static const struct v4l2_ioctl_ops gemtek_ioctl_ops = {
 	.vidioc_querycap	= vidioc_querycap,
 	.vidioc_g_tuner		= vidioc_g_tuner,
 	.vidioc_s_tuner		= vidioc_s_tuner,
@@ -571,6 +568,12 @@ static struct video_device gemtek_radio = {
 	.vidioc_s_ctrl		= vidioc_s_ctrl
 };
 
+static struct video_device gemtek_radio = {
+	.name			= "GemTek Radio card",
+	.fops			= &gemtek_fops,
+	.ioctl_ops 		= &gemtek_ioctl_ops,
+};
+
 /*
  * Initialization / cleanup related stuff.
  */
diff --git a/drivers/media/radio/radio-maestro.c b/drivers/media/radio/radio-maestro.c
index bddd3c409aa9..0ada1c697e8a 100644
--- a/drivers/media/radio/radio-maestro.c
+++ b/drivers/media/radio/radio-maestro.c
@@ -27,6 +27,7 @@
 #include <linux/pci.h>
 #include <linux/videodev2.h>
 #include <media/v4l2-common.h>
+#include <media/v4l2-ioctl.h>
 
 #include <linux/version.h>      /* for KERNEL_VERSION MACRO     */
 #define RADIO_VERSION KERNEL_VERSION(0,0,6)
@@ -354,10 +355,7 @@ static u16 __devinit radio_power_on(struct radio_device *dev)
 	return (ofreq == radio_bits_get(dev));
 }
 
-static struct video_device maestro_radio = {
-	.name           = "Maestro radio",
-	.type           = VID_TYPE_TUNER,
-	.fops           = &maestro_fops,
+static const struct v4l2_ioctl_ops maestro_ioctl_ops = {
 	.vidioc_querycap    = vidioc_querycap,
 	.vidioc_g_tuner     = vidioc_g_tuner,
 	.vidioc_s_tuner     = vidioc_s_tuner,
@@ -372,6 +370,12 @@ static struct video_device maestro_radio = {
 	.vidioc_s_ctrl      = vidioc_s_ctrl,
 };
 
+static struct video_device maestro_radio = {
+	.name           = "Maestro radio",
+	.fops           = &maestro_fops,
+	.ioctl_ops 	= &maestro_ioctl_ops,
+};
+
 static int __devinit maestro_probe(struct pci_dev *pdev,
 	const struct pci_device_id *ent)
 {
diff --git a/drivers/media/radio/radio-maxiradio.c b/drivers/media/radio/radio-maxiradio.c
index 0133ecf3e040..43c75497dc49 100644
--- a/drivers/media/radio/radio-maxiradio.c
+++ b/drivers/media/radio/radio-maxiradio.c
@@ -44,6 +44,7 @@
 #include <linux/pci.h>
 #include <linux/videodev2.h>
 #include <media/v4l2-common.h>
+#include <media/v4l2-ioctl.h>
 
 #define DRIVER_VERSION	"0.77"
 
@@ -373,13 +374,7 @@ static int vidioc_s_ctrl (struct file *file, void *priv,
 	return -EINVAL;
 }
 
-static struct video_device maxiradio_radio =
-{
-	.owner		    = THIS_MODULE,
-	.name		    = "Maxi Radio FM2000 radio",
-	.type		    = VID_TYPE_TUNER,
-	.fops               = &maxiradio_fops,
-
+static const struct v4l2_ioctl_ops maxiradio_ioctl_ops = {
 	.vidioc_querycap    = vidioc_querycap,
 	.vidioc_g_tuner     = vidioc_g_tuner,
 	.vidioc_s_tuner     = vidioc_s_tuner,
@@ -394,6 +389,12 @@ static struct video_device maxiradio_radio =
 	.vidioc_s_ctrl      = vidioc_s_ctrl,
 };
 
+static struct video_device maxiradio_radio = {
+	.name		    = "Maxi Radio FM2000 radio",
+	.fops               = &maxiradio_fops,
+	.ioctl_ops 	    = &maxiradio_ioctl_ops,
+};
+
 static int __devinit maxiradio_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
 {
 	if(!request_region(pci_resource_start(pdev, 0),
diff --git a/drivers/media/radio/radio-rtrack2.c b/drivers/media/radio/radio-rtrack2.c
index 070802103dc3..e2dde0807268 100644
--- a/drivers/media/radio/radio-rtrack2.c
+++ b/drivers/media/radio/radio-rtrack2.c
@@ -17,6 +17,7 @@
 #include <asm/uaccess.h>	/* copy to/from user		*/
 #include <linux/videodev2.h>	/* kernel radio structs		*/
 #include <media/v4l2-common.h>
+#include <media/v4l2-ioctl.h>
 #include <linux/spinlock.h>
 
 #include <linux/version.h>      /* for KERNEL_VERSION MACRO     */
@@ -294,12 +295,7 @@ static const struct file_operations rtrack2_fops = {
 	.llseek         = no_llseek,
 };
 
-static struct video_device rtrack2_radio=
-{
-	.owner		= THIS_MODULE,
-	.name		= "RadioTrack II radio",
-	.type		= VID_TYPE_TUNER,
-	.fops           = &rtrack2_fops,
+static const struct v4l2_ioctl_ops rtrack2_ioctl_ops = {
 	.vidioc_querycap    = vidioc_querycap,
 	.vidioc_g_tuner     = vidioc_g_tuner,
 	.vidioc_s_tuner     = vidioc_s_tuner,
@@ -314,6 +310,12 @@ static struct video_device rtrack2_radio=
 	.vidioc_s_input     = vidioc_s_input,
 };
 
+static struct video_device rtrack2_radio = {
+	.name		= "RadioTrack II radio",
+	.fops           = &rtrack2_fops,
+	.ioctl_ops 	= &rtrack2_ioctl_ops,
+};
+
 static int __init rtrack2_init(void)
 {
 	if(io==-1)
diff --git a/drivers/media/radio/radio-sf16fmi.c b/drivers/media/radio/radio-sf16fmi.c
index 66e052fd3909..bb5d92f104af 100644
--- a/drivers/media/radio/radio-sf16fmi.c
+++ b/drivers/media/radio/radio-sf16fmi.c
@@ -24,6 +24,7 @@
 #include <linux/delay.h>	/* udelay			*/
 #include <linux/videodev2.h>	/* kernel radio structs		*/
 #include <media/v4l2-common.h>
+#include <media/v4l2-ioctl.h>
 #include <linux/isapnp.h>
 #include <asm/io.h>		/* outb, outb_p			*/
 #include <asm/uaccess.h>	/* copy to/from user		*/
@@ -294,12 +295,7 @@ static const struct file_operations fmi_fops = {
 	.llseek         = no_llseek,
 };
 
-static struct video_device fmi_radio=
-{
-	.owner		= THIS_MODULE,
-	.name		= "SF16FMx radio",
-	.type		= VID_TYPE_TUNER,
-	.fops           = &fmi_fops,
+static const struct v4l2_ioctl_ops fmi_ioctl_ops = {
 	.vidioc_querycap    = vidioc_querycap,
 	.vidioc_g_tuner     = vidioc_g_tuner,
 	.vidioc_s_tuner     = vidioc_s_tuner,
@@ -314,6 +310,12 @@ static struct video_device fmi_radio=
 	.vidioc_s_ctrl      = vidioc_s_ctrl,
 };
 
+static struct video_device fmi_radio = {
+	.name		= "SF16FMx radio",
+	.fops           = &fmi_fops,
+	.ioctl_ops 	= &fmi_ioctl_ops,
+};
+
 /* ladis: this is my card. does any other types exist? */
 static struct isapnp_device_id id_table[] __devinitdata = {
 	{	ISAPNP_ANY_ID, ISAPNP_ANY_ID,
diff --git a/drivers/media/radio/radio-sf16fmr2.c b/drivers/media/radio/radio-sf16fmr2.c
index b0ccf7cb5952..6290553d24be 100644
--- a/drivers/media/radio/radio-sf16fmr2.c
+++ b/drivers/media/radio/radio-sf16fmr2.c
@@ -22,6 +22,7 @@
 #include <asm/uaccess.h>	/* copy to/from user		*/
 #include <linux/videodev2.h>	/* kernel radio structs		*/
 #include <media/v4l2-common.h>
+#include <media/v4l2-ioctl.h>
 #include <linux/mutex.h>
 
 static struct mutex lock;
@@ -410,12 +411,7 @@ static const struct file_operations fmr2_fops = {
 	.llseek         = no_llseek,
 };
 
-static struct video_device fmr2_radio=
-{
-	.owner		= THIS_MODULE,
-	.name		= "SF16FMR2 radio",
-	. type		= VID_TYPE_TUNER,
-	.fops		= &fmr2_fops,
+static const struct v4l2_ioctl_ops fmr2_ioctl_ops = {
 	.vidioc_querycap    = vidioc_querycap,
 	.vidioc_g_tuner     = vidioc_g_tuner,
 	.vidioc_s_tuner     = vidioc_s_tuner,
@@ -430,6 +426,12 @@ static struct video_device fmr2_radio=
 	.vidioc_s_ctrl      = vidioc_s_ctrl,
 };
 
+static struct video_device fmr2_radio = {
+	.name		= "SF16FMR2 radio",
+	.fops		= &fmr2_fops,
+	.ioctl_ops 	= &fmr2_ioctl_ops,
+};
+
 static int __init fmr2_init(void)
 {
 	fmr2_unit.port = io;
diff --git a/drivers/media/radio/radio-si470x.c b/drivers/media/radio/radio-si470x.c
index dc93a882b385..a4984ff87c9c 100644
--- a/drivers/media/radio/radio-si470x.c
+++ b/drivers/media/radio/radio-si470x.c
@@ -133,6 +133,7 @@
 #include <linux/videodev2.h>
 #include <linux/mutex.h>
 #include <media/v4l2-common.h>
+#include <media/v4l2-ioctl.h>
 #include <media/rds.h>
 #include <asm/unaligned.h>
 
@@ -1585,15 +1586,7 @@ done:
 	return retval;
 }
 
-
-/*
- * si470x_viddev_tamples - video device interface
- */
-static struct video_device si470x_viddev_template = {
-	.fops			= &si470x_fops,
-	.name			= DRIVER_NAME,
-	.type			= VID_TYPE_TUNER,
-	.release		= video_device_release,
+static const struct v4l2_ioctl_ops si470x_ioctl_ops = {
 	.vidioc_querycap	= si470x_vidioc_querycap,
 	.vidioc_g_input		= si470x_vidioc_g_input,
 	.vidioc_s_input		= si470x_vidioc_s_input,
@@ -1607,7 +1600,16 @@ static struct video_device si470x_viddev_template = {
 	.vidioc_g_frequency	= si470x_vidioc_g_frequency,
 	.vidioc_s_frequency	= si470x_vidioc_s_frequency,
 	.vidioc_s_hw_freq_seek	= si470x_vidioc_s_hw_freq_seek,
-	.owner			= THIS_MODULE,
+};
+
+/*
+ * si470x_viddev_tamples - video device interface
+ */
+static struct video_device si470x_viddev_template = {
+	.fops			= &si470x_fops,
+	.ioctl_ops 		= &si470x_ioctl_ops,
+	.name			= DRIVER_NAME,
+	.release		= video_device_release,
 };
 
 
diff --git a/drivers/media/radio/radio-terratec.c b/drivers/media/radio/radio-terratec.c
index acc32080e9bd..cefa44fc5aed 100644
--- a/drivers/media/radio/radio-terratec.c
+++ b/drivers/media/radio/radio-terratec.c
@@ -32,6 +32,7 @@
 #include <asm/uaccess.h>	/* copy to/from user		*/
 #include <linux/videodev2.h>	/* kernel radio structs		*/
 #include <media/v4l2-common.h>
+#include <media/v4l2-ioctl.h>
 #include <linux/spinlock.h>
 
 #include <linux/version.h>      /* for KERNEL_VERSION MACRO     */
@@ -366,12 +367,7 @@ static const struct file_operations terratec_fops = {
 	.llseek         = no_llseek,
 };
 
-static struct video_device terratec_radio=
-{
-	.owner		= THIS_MODULE,
-	.name		= "TerraTec ActiveRadio",
-	.type		= VID_TYPE_TUNER,
-	.fops           = &terratec_fops,
+static const struct v4l2_ioctl_ops terratec_ioctl_ops = {
 	.vidioc_querycap    = vidioc_querycap,
 	.vidioc_g_tuner     = vidioc_g_tuner,
 	.vidioc_s_tuner     = vidioc_s_tuner,
@@ -386,6 +382,12 @@ static struct video_device terratec_radio=
 	.vidioc_s_input     = vidioc_s_input,
 };
 
+static struct video_device terratec_radio = {
+	.name		= "TerraTec ActiveRadio",
+	.fops           = &terratec_fops,
+	.ioctl_ops 	= &terratec_ioctl_ops,
+};
+
 static int __init terratec_init(void)
 {
 	if(io==-1)
diff --git a/drivers/media/radio/radio-trust.c b/drivers/media/radio/radio-trust.c
index 4ebdfbadeb9c..d70172d23edb 100644
--- a/drivers/media/radio/radio-trust.c
+++ b/drivers/media/radio/radio-trust.c
@@ -23,6 +23,7 @@
 #include <asm/uaccess.h>
 #include <linux/videodev2.h>
 #include <media/v4l2-common.h>
+#include <media/v4l2-ioctl.h>
 
 #include <linux/version.h>      /* for KERNEL_VERSION MACRO     */
 #define RADIO_VERSION KERNEL_VERSION(0,0,2)
@@ -346,12 +347,7 @@ static const struct file_operations trust_fops = {
 	.llseek         = no_llseek,
 };
 
-static struct video_device trust_radio=
-{
-	.owner		= THIS_MODULE,
-	.name		= "Trust FM Radio",
-	.type		= VID_TYPE_TUNER,
-	.fops           = &trust_fops,
+static const struct v4l2_ioctl_ops trust_ioctl_ops = {
 	.vidioc_querycap    = vidioc_querycap,
 	.vidioc_g_tuner     = vidioc_g_tuner,
 	.vidioc_s_tuner     = vidioc_s_tuner,
@@ -366,6 +362,12 @@ static struct video_device trust_radio=
 	.vidioc_s_input     = vidioc_s_input,
 };
 
+static struct video_device trust_radio = {
+	.name		= "Trust FM Radio",
+	.fops           = &trust_fops,
+	.ioctl_ops 	= &trust_ioctl_ops,
+};
+
 static int __init trust_init(void)
 {
 	if(io == -1) {
diff --git a/drivers/media/radio/radio-typhoon.c b/drivers/media/radio/radio-typhoon.c
index 18f2abd7e255..f8d62cfea774 100644
--- a/drivers/media/radio/radio-typhoon.c
+++ b/drivers/media/radio/radio-typhoon.c
@@ -40,6 +40,7 @@
 #include <asm/uaccess.h>	/* copy to/from user              */
 #include <linux/videodev2.h>	/* kernel radio structs           */
 #include <media/v4l2-common.h>
+#include <media/v4l2-ioctl.h>
 
 #include <linux/version.h>      /* for KERNEL_VERSION MACRO     */
 #define RADIO_VERSION KERNEL_VERSION(0,1,1)
@@ -344,12 +345,7 @@ static const struct file_operations typhoon_fops = {
 	.llseek         = no_llseek,
 };
 
-static struct video_device typhoon_radio =
-{
-	.owner		= THIS_MODULE,
-	.name		= "Typhoon Radio",
-	.type		= VID_TYPE_TUNER,
-	.fops           = &typhoon_fops,
+static const struct v4l2_ioctl_ops typhoon_ioctl_ops = {
 	.vidioc_querycap    = vidioc_querycap,
 	.vidioc_g_tuner     = vidioc_g_tuner,
 	.vidioc_s_tuner     = vidioc_s_tuner,
@@ -364,6 +360,12 @@ static struct video_device typhoon_radio =
 	.vidioc_s_ctrl      = vidioc_s_ctrl,
 };
 
+static struct video_device typhoon_radio = {
+	.name		= "Typhoon Radio",
+	.fops           = &typhoon_fops,
+	.ioctl_ops 	= &typhoon_ioctl_ops,
+};
+
 #ifdef CONFIG_RADIO_TYPHOON_PROC_FS
 
 static int typhoon_proc_show(struct seq_file *m, void *v)
diff --git a/drivers/media/radio/radio-zoltrix.c b/drivers/media/radio/radio-zoltrix.c
index 43773c56c62f..9f17a332fa11 100644
--- a/drivers/media/radio/radio-zoltrix.c
+++ b/drivers/media/radio/radio-zoltrix.c
@@ -37,6 +37,7 @@
 #include <asm/uaccess.h>	/* copy to/from user              */
 #include <linux/videodev2.h>	/* kernel radio structs           */
 #include <media/v4l2-common.h>
+#include <media/v4l2-ioctl.h>
 
 #include <linux/version.h>      /* for KERNEL_VERSION MACRO     */
 #define RADIO_VERSION KERNEL_VERSION(0,0,2)
@@ -407,12 +408,7 @@ static const struct file_operations zoltrix_fops =
 	.llseek         = no_llseek,
 };
 
-static struct video_device zoltrix_radio =
-{
-	.owner		= THIS_MODULE,
-	.name		= "Zoltrix Radio Plus",
-	.type		= VID_TYPE_TUNER,
-	.fops           = &zoltrix_fops,
+static const struct v4l2_ioctl_ops zoltrix_ioctl_ops = {
 	.vidioc_querycap    = vidioc_querycap,
 	.vidioc_g_tuner     = vidioc_g_tuner,
 	.vidioc_s_tuner     = vidioc_s_tuner,
@@ -427,6 +423,12 @@ static struct video_device zoltrix_radio =
 	.vidioc_s_ctrl      = vidioc_s_ctrl,
 };
 
+static struct video_device zoltrix_radio = {
+	.name		= "Zoltrix Radio Plus",
+	.fops           = &zoltrix_fops,
+	.ioctl_ops 	= &zoltrix_ioctl_ops,
+};
+
 static int __init zoltrix_init(void)
 {
 	if (io == -1) {
diff --git a/drivers/media/video/Kconfig b/drivers/media/video/Kconfig
index f606d2951fde..ecbfa1b39b70 100644
--- a/drivers/media/video/Kconfig
+++ b/drivers/media/video/Kconfig
@@ -487,17 +487,6 @@ config VIDEO_PMS
 	  To compile this driver as a module, choose M here: the
 	  module will be called pms.
 
-config VIDEO_PLANB
-	tristate "PlanB Video-In on PowerMac"
-	depends on PPC_PMAC && VIDEO_V4L1 && BROKEN
-	help
-	  PlanB is the V4L driver for the PowerMac 7x00/8x00 series video
-	  input hardware. If you want to experiment with this, say Y.
-	  Otherwise, or if you don't understand a word, say N. See
-	  <http://www.cpu.lu/~mlan/linux/dev/planb.html> for more info.
-
-	  Saying M will compile this driver as a module (planb).
-
 config VIDEO_BWQCAM
 	tristate "Quickcam BW Video For Linux"
 	depends on PARPORT && VIDEO_V4L1
@@ -641,7 +630,7 @@ config VIDEO_ZORAN_ZR36060
 	depends on VIDEO_ZORAN
 	help
 	  Say Y to support Zoran boards based on 36060 chips.
-	  This includes Iomega Bus, Pinnacle DC10, Linux media Labs 33
+	  This includes Iomega Buz, Pinnacle DC10, Linux media Labs 33
 	  and 33 R10 and AverMedia 6 boards.
 
 config VIDEO_ZORAN_BUZ
@@ -806,13 +795,7 @@ menuconfig V4L_USB_DRIVERS
 
 if V4L_USB_DRIVERS && USB
 
-config USB_VIDEO_CLASS
-	tristate "USB Video Class (UVC)"
-	---help---
-	  Support for the USB Video Class (UVC).  Currently only video
-	  input devices, such as webcams, are supported.
-
-	  For more information see: <http://linux-uvc.berlios.de/>
+source "drivers/media/video/uvc/Kconfig"
 
 source "drivers/media/video/gspca/Kconfig"
 
diff --git a/drivers/media/video/Makefile b/drivers/media/video/Makefile
index 45d5db5abb1e..bbc6f8b82297 100644
--- a/drivers/media/video/Makefile
+++ b/drivers/media/video/Makefile
@@ -10,6 +10,8 @@ msp3400-objs	:=	msp3400-driver.o msp3400-kthreads.o
 
 stkwebcam-objs	:=	stk-webcam.o stk-sensor.o
 
+videodev-objs	:=	v4l2-dev.o v4l2-ioctl.o
+
 obj-$(CONFIG_VIDEO_DEV) += videodev.o compat_ioctl32.o v4l2-int-device.o
 
 obj-$(CONFIG_VIDEO_V4L2_COMMON) += v4l2-common.o
@@ -55,7 +57,6 @@ obj-$(CONFIG_VIDEO_ZORAN_DC30) += zr36050.o zr36016.o
 obj-$(CONFIG_VIDEO_ZORAN_ZR36060) += zr36060.o
 
 obj-$(CONFIG_VIDEO_PMS) += pms.o
-obj-$(CONFIG_VIDEO_PLANB) += planb.o
 obj-$(CONFIG_VIDEO_VINO) += vino.o indycam.o
 obj-$(CONFIG_VIDEO_STRADIS) += stradis.o
 obj-$(CONFIG_VIDEO_CPIA) += cpia.o
diff --git a/drivers/media/video/arv.c b/drivers/media/video/arv.c
index 8c7d1958856b..9e436ad3d34b 100644
--- a/drivers/media/video/arv.c
+++ b/drivers/media/video/arv.c
@@ -29,6 +29,7 @@
 #include <linux/sched.h>
 #include <linux/videodev.h>
 #include <media/v4l2-common.h>
+#include <media/v4l2-ioctl.h>
 #include <linux/mutex.h>
 
 #include <asm/uaccess.h>
@@ -754,9 +755,7 @@ static const struct file_operations ar_fops = {
 };
 
 static struct video_device ar_template = {
-	.owner		= THIS_MODULE,
 	.name		= "Colour AR VGA",
-	.type		= VID_TYPE_CAPTURE,
 	.fops		= &ar_fops,
 	.release	= ar_release,
 	.minor		= -1,
diff --git a/drivers/media/video/au0828/Kconfig b/drivers/media/video/au0828/Kconfig
index 52b2491581a8..ed9a50f189fc 100644
--- a/drivers/media/video/au0828/Kconfig
+++ b/drivers/media/video/au0828/Kconfig
@@ -6,6 +6,7 @@ config VIDEO_AU0828
 	select VIDEO_TVEEPROM
 	select DVB_AU8522 if !DVB_FE_CUSTOMIZE
 	select MEDIA_TUNER_XC5000 if !DVB_FE_CUSTOMIZE
+	select MEDIA_TUNER_MXL5007T if !DVB_FE_CUSTOMIZE
 	---help---
 	  This is a video4linux driver for Auvitek's USB device.
 
diff --git a/drivers/media/video/au0828/au0828-cards.c b/drivers/media/video/au0828/au0828-cards.c
index 898e12395e7c..443e59009762 100644
--- a/drivers/media/video/au0828/au0828-cards.c
+++ b/drivers/media/video/au0828/au0828-cards.c
@@ -32,6 +32,9 @@ struct au0828_board au0828_boards[] = {
 	[AU0828_BOARD_HAUPPAUGE_HVR950Q] = {
 		.name	= "Hauppauge HVR950Q",
 	},
+	[AU0828_BOARD_HAUPPAUGE_HVR950Q_MXL] = {
+		.name	= "Hauppauge HVR950Q rev xxF8",
+	},
 	[AU0828_BOARD_DVICO_FUSIONHDTV7] = {
 		.name	= "DViCO FusionHDTV USB",
 	},
@@ -49,6 +52,7 @@ int au0828_tuner_callback(void *priv, int command, int arg)
 	switch (dev->board) {
 	case AU0828_BOARD_HAUPPAUGE_HVR850:
 	case AU0828_BOARD_HAUPPAUGE_HVR950Q:
+	case AU0828_BOARD_HAUPPAUGE_HVR950Q_MXL:
 	case AU0828_BOARD_DVICO_FUSIONHDTV7:
 		if (command == 0) {
 			/* Tuner Reset Command from xc5000 */
@@ -110,6 +114,7 @@ void au0828_card_setup(struct au0828_dev *dev)
 	switch (dev->board) {
 	case AU0828_BOARD_HAUPPAUGE_HVR850:
 	case AU0828_BOARD_HAUPPAUGE_HVR950Q:
+	case AU0828_BOARD_HAUPPAUGE_HVR950Q_MXL:
 		if (dev->i2c_rc == 0)
 			hauppauge_eeprom(dev, eeprom+0xa0);
 		break;
@@ -128,6 +133,7 @@ void au0828_gpio_setup(struct au0828_dev *dev)
 	switch (dev->board) {
 	case AU0828_BOARD_HAUPPAUGE_HVR850:
 	case AU0828_BOARD_HAUPPAUGE_HVR950Q:
+	case AU0828_BOARD_HAUPPAUGE_HVR950Q_MXL:
 		/* GPIO's
 		 * 4 - CS5340
 		 * 5 - AU8522 Demodulator
@@ -193,6 +199,12 @@ struct usb_device_id au0828_usb_id_table [] = {
 		.driver_info = AU0828_BOARD_HAUPPAUGE_HVR950Q },
 	{ USB_DEVICE(0x0fd9, 0x0008),
 		.driver_info = AU0828_BOARD_HAUPPAUGE_HVR950Q },
+	{ USB_DEVICE(0x2040, 0x7201),
+		.driver_info = AU0828_BOARD_HAUPPAUGE_HVR950Q_MXL },
+	{ USB_DEVICE(0x2040, 0x7211),
+		.driver_info = AU0828_BOARD_HAUPPAUGE_HVR950Q_MXL },
+	{ USB_DEVICE(0x2040, 0x7281),
+		.driver_info = AU0828_BOARD_HAUPPAUGE_HVR950Q_MXL },
 	{ },
 };
 
diff --git a/drivers/media/video/au0828/au0828-cards.h b/drivers/media/video/au0828/au0828-cards.h
index e26f54a961d0..c37f5fd0fa80 100644
--- a/drivers/media/video/au0828/au0828-cards.h
+++ b/drivers/media/video/au0828/au0828-cards.h
@@ -23,3 +23,4 @@
 #define AU0828_BOARD_HAUPPAUGE_HVR950Q	1
 #define AU0828_BOARD_HAUPPAUGE_HVR850 	2
 #define AU0828_BOARD_DVICO_FUSIONHDTV7	3
+#define AU0828_BOARD_HAUPPAUGE_HVR950Q_MXL	4
diff --git a/drivers/media/video/au0828/au0828-dvb.c b/drivers/media/video/au0828/au0828-dvb.c
index c6d470590380..584a83a94a2a 100644
--- a/drivers/media/video/au0828/au0828-dvb.c
+++ b/drivers/media/video/au0828/au0828-dvb.c
@@ -28,6 +28,7 @@
 #include "au0828.h"
 #include "au8522.h"
 #include "xc5000.h"
+#include "mxl5007t.h"
 
 DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr);
 
@@ -45,6 +46,11 @@ static struct xc5000_config hauppauge_hvr950q_tunerconfig = {
 	.tuner_callback   = au0828_tuner_callback
 };
 
+static struct mxl5007t_config mxl5007t_hvr950q_config = {
+	.xtal_freq_hz = MxL_XTAL_24_MHZ,
+	.if_freq_hz = MxL_IF_6_MHZ,
+};
+
 /*-------------------------------------------------------------------*/
 static void urb_completion(struct urb *purb)
 {
@@ -342,6 +348,15 @@ int au0828_dvb_register(struct au0828_dev *dev)
 				&dev->i2c_adap,
 				&hauppauge_hvr950q_tunerconfig, dev);
 		break;
+	case AU0828_BOARD_HAUPPAUGE_HVR950Q_MXL:
+		dvb->frontend = dvb_attach(au8522_attach,
+				&hauppauge_hvr950q_config,
+				&dev->i2c_adap);
+		if (dvb->frontend != NULL)
+			dvb_attach(mxl5007t_attach, dvb->frontend,
+				   &dev->i2c_adap, 0x60,
+				   &mxl5007t_hvr950q_config);
+		break;
 	default:
 		printk(KERN_WARNING "The frontend of your DVB/ATSC card "
 		       "isn't supported yet\n");
diff --git a/drivers/media/video/bt8xx/Kconfig b/drivers/media/video/bt8xx/Kconfig
index 24a34fc1f2b3..ce71e8e7b835 100644
--- a/drivers/media/video/bt8xx/Kconfig
+++ b/drivers/media/video/bt8xx/Kconfig
@@ -1,9 +1,7 @@
 config VIDEO_BT848
 	tristate "BT848 Video For Linux"
 	depends on VIDEO_DEV && PCI && I2C && VIDEO_V4L2 && INPUT
-	depends on HOTPLUG	# due to FW_LOADER
 	select I2C_ALGOBIT
-	select FW_LOADER
 	select VIDEO_BTCX
 	select VIDEOBUF_DMA_SG
 	select VIDEO_IR
diff --git a/drivers/media/video/bt8xx/bttv-driver.c b/drivers/media/video/bt8xx/bttv-driver.c
index 0ea559a7fe59..85bf31ab8789 100644
--- a/drivers/media/video/bt8xx/bttv-driver.c
+++ b/drivers/media/video/bt8xx/bttv-driver.c
@@ -45,6 +45,7 @@
 #include <linux/kdev_t.h>
 #include "bttvp.h"
 #include <media/v4l2-common.h>
+#include <media/v4l2-ioctl.h>
 #include <media/tvaudio.h>
 #include <media/msp3400.h>
 
@@ -163,8 +164,8 @@ MODULE_LICENSE("GPL");
 static ssize_t show_card(struct device *cd,
 			 struct device_attribute *attr, char *buf)
 {
-	struct video_device *vfd = container_of(cd, struct video_device, class_dev);
-	struct bttv *btv = dev_get_drvdata(vfd->dev);
+	struct video_device *vfd = container_of(cd, struct video_device, dev);
+	struct bttv *btv = dev_get_drvdata(vfd->parent);
 	return sprintf(buf, "%d\n", btv ? btv->c.type : UNSET);
 }
 static DEVICE_ATTR(card, S_IRUGO, show_card, NULL);
@@ -3357,10 +3358,7 @@ static const struct file_operations bttv_fops =
 	.poll     = bttv_poll,
 };
 
-static struct video_device bttv_video_template =
-{
-	.fops     = &bttv_fops,
-	.minor    = -1,
+static const struct v4l2_ioctl_ops bttv_ioctl_ops = {
 	.vidioc_querycap                = bttv_querycap,
 	.vidioc_enum_fmt_vid_cap        = bttv_enum_fmt_vid_cap,
 	.vidioc_g_fmt_vid_cap           = bttv_g_fmt_vid_cap,
@@ -3411,8 +3409,14 @@ static struct video_device bttv_video_template =
 	.vidioc_g_register		= bttv_g_register,
 	.vidioc_s_register		= bttv_s_register,
 #endif
-	.tvnorms                        = BTTV_NORMS,
-	.current_norm                   = V4L2_STD_PAL,
+};
+
+static struct video_device bttv_video_template = {
+	.fops         = &bttv_fops,
+	.minor        = -1,
+	.ioctl_ops    = &bttv_ioctl_ops,
+	.tvnorms      = BTTV_NORMS,
+	.current_norm = V4L2_STD_PAL,
 };
 
 /* ----------------------------------------------------------------------- */
@@ -3635,10 +3639,7 @@ static const struct file_operations radio_fops =
 	.poll     = radio_poll,
 };
 
-static struct video_device radio_template =
-{
-	.fops     = &radio_fops,
-	.minor    = -1,
+static const struct v4l2_ioctl_ops radio_ioctl_ops = {
 	.vidioc_querycap        = radio_querycap,
 	.vidioc_g_tuner         = radio_g_tuner,
 	.vidioc_enum_input      = radio_enum_input,
@@ -3655,6 +3656,12 @@ static struct video_device radio_template =
 	.vidioc_s_frequency     = bttv_s_frequency,
 };
 
+static struct video_device radio_template = {
+	.fops      = &radio_fops,
+	.minor     = -1,
+	.ioctl_ops = &radio_ioctl_ops,
+};
+
 /* ----------------------------------------------------------------------- */
 /* some debug code                                                         */
 
@@ -4175,8 +4182,7 @@ static irqreturn_t bttv_irq(int irq, void *dev_id)
 
 static struct video_device *vdev_init(struct bttv *btv,
 				      const struct video_device *template,
-				      const char *type_name,
-				      const int type)
+				      const char *type_name)
 {
 	struct video_device *vfd;
 
@@ -4185,9 +4191,8 @@ static struct video_device *vdev_init(struct bttv *btv,
 		return NULL;
 	*vfd = *template;
 	vfd->minor   = -1;
-	vfd->dev     = &btv->c.pci->dev;
+	vfd->parent  = &btv->c.pci->dev;
 	vfd->release = video_device_release;
-	vfd->type    = type;
 	vfd->debug   = bttv_debug;
 	snprintf(vfd->name, sizeof(vfd->name), "BT%d%s %s (%s)",
 		 btv->id, (btv->id==848 && btv->revision==0x12) ? "A" : "",
@@ -4223,20 +4228,11 @@ static void bttv_unregister_video(struct bttv *btv)
 /* register video4linux devices */
 static int __devinit bttv_register_video(struct bttv *btv)
 {
-	int video_type = VID_TYPE_CAPTURE |
-			 VID_TYPE_TUNER   |
-			 VID_TYPE_CLIPPING|
-			 VID_TYPE_SCALES;
-
-	if (no_overlay <= 0) {
-		bttv_video_template.type |= VID_TYPE_OVERLAY;
-	} else {
+	if (no_overlay > 0)
 		printk("bttv: Overlay support disabled.\n");
-	}
 
 	/* video */
-	btv->video_dev = vdev_init(btv, &bttv_video_template,
-				   "video", video_type);
+	btv->video_dev = vdev_init(btv, &bttv_video_template, "video");
 
 	if (NULL == btv->video_dev)
 		goto err;
@@ -4244,7 +4240,7 @@ static int __devinit bttv_register_video(struct bttv *btv)
 		goto err;
 	printk(KERN_INFO "bttv%d: registered device video%d\n",
 	       btv->c.nr,btv->video_dev->minor & 0x1f);
-	if (device_create_file(&btv->video_dev->class_dev,
+	if (device_create_file(&btv->video_dev->dev,
 				     &dev_attr_card)<0) {
 		printk(KERN_ERR "bttv%d: device_create_file 'card' "
 		       "failed\n", btv->c.nr);
@@ -4252,8 +4248,7 @@ static int __devinit bttv_register_video(struct bttv *btv)
 	}
 
 	/* vbi */
-	btv->vbi_dev = vdev_init(btv, &bttv_video_template,
-				 "vbi", VID_TYPE_TUNER | VID_TYPE_TELETEXT);
+	btv->vbi_dev = vdev_init(btv, &bttv_video_template, "vbi");
 
 	if (NULL == btv->vbi_dev)
 		goto err;
@@ -4265,8 +4260,7 @@ static int __devinit bttv_register_video(struct bttv *btv)
 	if (!btv->has_radio)
 		return 0;
 	/* radio */
-	btv->radio_dev = vdev_init(btv, &radio_template,
-				   "radio", VID_TYPE_TUNER);
+	btv->radio_dev = vdev_init(btv, &radio_template, "radio");
 	if (NULL == btv->radio_dev)
 		goto err;
 	if (video_register_device(btv->radio_dev, VFL_TYPE_RADIO,radio_nr)<0)
diff --git a/drivers/media/video/bt8xx/bttv-risc.c b/drivers/media/video/bt8xx/bttv-risc.c
index 0af586876e72..649682aac1ac 100644
--- a/drivers/media/video/bt8xx/bttv-risc.c
+++ b/drivers/media/video/bt8xx/bttv-risc.c
@@ -31,6 +31,7 @@
 #include <linux/interrupt.h>
 #include <asm/page.h>
 #include <asm/pgtable.h>
+#include <media/v4l2-ioctl.h>
 
 #include "bttvp.h"
 
diff --git a/drivers/media/video/bt8xx/bttv-vbi.c b/drivers/media/video/bt8xx/bttv-vbi.c
index 68f28e5fa040..6819e21a3773 100644
--- a/drivers/media/video/bt8xx/bttv-vbi.c
+++ b/drivers/media/video/bt8xx/bttv-vbi.c
@@ -29,6 +29,7 @@
 #include <linux/kernel.h>
 #include <linux/interrupt.h>
 #include <linux/kdev_t.h>
+#include <media/v4l2-ioctl.h>
 #include <asm/io.h>
 #include "bttvp.h"
 
diff --git a/drivers/media/video/bw-qcam.c b/drivers/media/video/bw-qcam.c
index b364adaae78d..d3b3268bace8 100644
--- a/drivers/media/video/bw-qcam.c
+++ b/drivers/media/video/bw-qcam.c
@@ -74,6 +74,7 @@ OTHER DEALINGS IN THE SOFTWARE.
 #include <linux/sched.h>
 #include <linux/videodev.h>
 #include <media/v4l2-common.h>
+#include <media/v4l2-ioctl.h>
 #include <linux/mutex.h>
 #include <asm/uaccess.h>
 
@@ -906,9 +907,7 @@ static const struct file_operations qcam_fops = {
 };
 static struct video_device qcam_template=
 {
-	.owner		= THIS_MODULE,
 	.name		= "Connectix Quickcam",
-	.type		= VID_TYPE_CAPTURE,
 	.fops           = &qcam_fops,
 };
 
diff --git a/drivers/media/video/c-qcam.c b/drivers/media/video/c-qcam.c
index fe1e67bb1ca8..fe9379b282d3 100644
--- a/drivers/media/video/c-qcam.c
+++ b/drivers/media/video/c-qcam.c
@@ -35,6 +35,7 @@
 #include <linux/sched.h>
 #include <linux/videodev.h>
 #include <media/v4l2-common.h>
+#include <media/v4l2-ioctl.h>
 #include <linux/mutex.h>
 #include <linux/jiffies.h>
 
@@ -701,9 +702,7 @@ static const struct file_operations qcam_fops = {
 
 static struct video_device qcam_template=
 {
-	.owner		= THIS_MODULE,
 	.name		= "Colour QuickCam",
-	.type		= VID_TYPE_CAPTURE,
 	.fops           = &qcam_fops,
 };
 
diff --git a/drivers/media/video/cafe_ccic.c b/drivers/media/video/cafe_ccic.c
index d99453faaab7..c149b7d712e5 100644
--- a/drivers/media/video/cafe_ccic.c
+++ b/drivers/media/video/cafe_ccic.c
@@ -25,6 +25,7 @@
 #include <linux/spinlock.h>
 #include <linux/videodev2.h>
 #include <media/v4l2-common.h>
+#include <media/v4l2-ioctl.h>
 #include <media/v4l2-chip-ident.h>
 #include <linux/device.h>
 #include <linux/wait.h>
@@ -1768,17 +1769,7 @@ static const struct file_operations cafe_v4l_fops = {
 	.llseek = no_llseek,
 };
 
-static struct video_device cafe_v4l_template = {
-	.name = "cafe",
-	.type = VFL_TYPE_GRABBER,
-	.type2 = VID_TYPE_CAPTURE,
-	.minor = -1, /* Get one dynamically */
-	.tvnorms = V4L2_STD_NTSC_M,
-	.current_norm = V4L2_STD_NTSC_M,  /* make mplayer happy */
-
-	.fops = &cafe_v4l_fops,
-	.release = cafe_v4l_dev_release,
-
+static const struct v4l2_ioctl_ops cafe_v4l_ioctl_ops = {
 	.vidioc_querycap 	= cafe_vidioc_querycap,
 	.vidioc_enum_fmt_vid_cap = cafe_vidioc_enum_fmt_vid_cap,
 	.vidioc_try_fmt_vid_cap	= cafe_vidioc_try_fmt_vid_cap,
@@ -1801,6 +1792,17 @@ static struct video_device cafe_v4l_template = {
 	.vidioc_s_parm		= cafe_vidioc_s_parm,
 };
 
+static struct video_device cafe_v4l_template = {
+	.name = "cafe",
+	.minor = -1, /* Get one dynamically */
+	.tvnorms = V4L2_STD_NTSC_M,
+	.current_norm = V4L2_STD_NTSC_M,  /* make mplayer happy */
+
+	.fops = &cafe_v4l_fops,
+	.ioctl_ops = &cafe_v4l_ioctl_ops,
+	.release = cafe_v4l_dev_release,
+};
+
 
 
 
@@ -2157,7 +2159,7 @@ static int cafe_pci_probe(struct pci_dev *pdev,
 	cam->v4ldev = cafe_v4l_template;
 	cam->v4ldev.debug = 0;
 //	cam->v4ldev.debug = V4L2_DEBUG_IOCTL_ARG;
-	cam->v4ldev.dev = &pdev->dev;
+	cam->v4ldev.parent = &pdev->dev;
 	ret = video_register_device(&cam->v4ldev, VFL_TYPE_GRABBER, -1);
 	if (ret)
 		goto out_smbus;
diff --git a/drivers/media/video/compat_ioctl32.c b/drivers/media/video/compat_ioctl32.c
index 54de0cd482e9..bd5d9de5a008 100644
--- a/drivers/media/video/compat_ioctl32.c
+++ b/drivers/media/video/compat_ioctl32.c
@@ -17,7 +17,7 @@
 #include <linux/videodev2.h>
 #include <linux/module.h>
 #include <linux/smp_lock.h>
-#include <media/v4l2-common.h>
+#include <media/v4l2-ioctl.h>
 
 #ifdef CONFIG_COMPAT
 
diff --git a/drivers/media/video/cpia.c b/drivers/media/video/cpia.c
index 2a81376ef503..dc8cc6115e2f 100644
--- a/drivers/media/video/cpia.c
+++ b/drivers/media/video/cpia.c
@@ -3799,9 +3799,7 @@ static const struct file_operations cpia_fops = {
 };
 
 static struct video_device cpia_template = {
-	.owner		= THIS_MODULE,
 	.name		= "CPiA Camera",
-	.type		= VID_TYPE_CAPTURE,
 	.fops           = &cpia_fops,
 };
 
diff --git a/drivers/media/video/cpia.h b/drivers/media/video/cpia.h
index 5096058bf579..8f0cfee4b8a1 100644
--- a/drivers/media/video/cpia.h
+++ b/drivers/media/video/cpia.h
@@ -46,6 +46,7 @@
 #include <asm/uaccess.h>
 #include <linux/videodev.h>
 #include <media/v4l2-common.h>
+#include <media/v4l2-ioctl.h>
 #include <linux/list.h>
 #include <linux/mutex.h>
 
diff --git a/drivers/media/video/cpia2/cpia2_core.c b/drivers/media/video/cpia2/cpia2_core.c
index f2e8b1c82c66..af8b9ec8e358 100644
--- a/drivers/media/video/cpia2/cpia2_core.c
+++ b/drivers/media/video/cpia2/cpia2_core.c
@@ -32,6 +32,7 @@
 #include "cpia2.h"
 
 #include <linux/slab.h>
+#include <linux/mm.h>
 #include <linux/vmalloc.h>
 #include <linux/firmware.h>
 
diff --git a/drivers/media/video/cpia2/cpia2_v4l.c b/drivers/media/video/cpia2/cpia2_v4l.c
index 7ce2789fa976..515c8b57a60d 100644
--- a/drivers/media/video/cpia2/cpia2_v4l.c
+++ b/drivers/media/video/cpia2/cpia2_v4l.c
@@ -37,6 +37,7 @@
 #include <linux/sched.h>
 #include <linux/slab.h>
 #include <linux/init.h>
+#include <media/v4l2-ioctl.h>
 
 #include "cpia2.h"
 #include "cpia2dev.h"
@@ -1935,11 +1936,7 @@ static const struct file_operations fops_template = {
 
 static struct video_device cpia2_template = {
 	/* I could not find any place for the old .initialize initializer?? */
-	.owner=		THIS_MODULE,
 	.name=		"CPiA2 Camera",
-	.type=		VID_TYPE_CAPTURE,
-	.type2 = 	V4L2_CAP_VIDEO_CAPTURE |
-			V4L2_CAP_STREAMING,
 	.minor=		-1,
 	.fops=		&fops_template,
 	.release=	video_device_release,
diff --git a/drivers/media/video/cs5345.c b/drivers/media/video/cs5345.c
index 1c3fa3a7470a..a662b15d5b90 100644
--- a/drivers/media/video/cs5345.c
+++ b/drivers/media/video/cs5345.c
@@ -35,7 +35,7 @@ static int debug;
 
 module_param(debug, bool, 0644);
 
-MODULE_PARM_DESC(debug, "Debugging messages\n\t\t\t0=Off (default), 1=On");
+MODULE_PARM_DESC(debug, "Debugging messages, 0=Off (default), 1=On");
 
 
 /* ----------------------------------------------------------------------- */
@@ -111,7 +111,7 @@ static int cs5345_command(struct i2c_client *client, unsigned cmd, void *arg)
 		if (cmd == VIDIOC_DBG_G_REGISTER)
 			reg->val = cs5345_read(client, reg->reg & 0x1f);
 		else
-			cs5345_write(client, reg->reg & 0x1f, reg->val & 0x1f);
+			cs5345_write(client, reg->reg & 0x1f, reg->val & 0xff);
 		break;
 	}
 #endif
diff --git a/drivers/media/video/cs53l32a.c b/drivers/media/video/cs53l32a.c
index 645b339152d3..c4444500b330 100644
--- a/drivers/media/video/cs53l32a.c
+++ b/drivers/media/video/cs53l32a.c
@@ -26,7 +26,7 @@
 #include <asm/uaccess.h>
 #include <linux/i2c.h>
 #include <linux/i2c-id.h>
-#include <linux/videodev.h>
+#include <linux/videodev2.h>
 #include <media/v4l2-common.h>
 #include <media/v4l2-chip-ident.h>
 #include <media/v4l2-i2c-drv-legacy.h>
@@ -39,7 +39,7 @@ static int debug;
 
 module_param(debug, bool, 0644);
 
-MODULE_PARM_DESC(debug, "Debugging messages\n\t\t\t0=Off (default), 1=On");
+MODULE_PARM_DESC(debug, "Debugging messages, 0=Off (default), 1=On");
 
 static unsigned short normal_i2c[] = { 0x22 >> 1, I2C_CLIENT_END };
 
diff --git a/drivers/media/video/cx18/Kconfig b/drivers/media/video/cx18/Kconfig
index 9aefdc5ea79a..ef48565de7f1 100644
--- a/drivers/media/video/cx18/Kconfig
+++ b/drivers/media/video/cx18/Kconfig
@@ -2,9 +2,7 @@ config VIDEO_CX18
 	tristate "Conexant cx23418 MPEG encoder support"
 	depends on VIDEO_V4L2 && DVB_CORE && PCI && I2C && EXPERIMENTAL
 	depends on INPUT	# due to VIDEO_IR
-	depends on HOTPLUG	# due to FW_LOADER
 	select I2C_ALGOBIT
-	select FW_LOADER
 	select VIDEO_IR
 	select VIDEO_TUNER
 	select VIDEO_TVEEPROM
diff --git a/drivers/media/video/cx18/cx18-av-audio.c b/drivers/media/video/cx18/cx18-av-audio.c
index c40a286de1b9..0b55837880a7 100644
--- a/drivers/media/video/cx18/cx18-av-audio.c
+++ b/drivers/media/video/cx18/cx18-av-audio.c
@@ -30,7 +30,6 @@ static int set_audclk_freq(struct cx18 *cx, u32 freq)
 	if (freq != 32000 && freq != 44100 && freq != 48000)
 		return -EINVAL;
 
-	/* common for all inputs and rates */
 	/* SA_MCLK_SEL=1, SA_MCLK_DIV=0x10 */
 	cx18_av_write(cx, 0x127, 0x50);
 
@@ -38,15 +37,30 @@ static int set_audclk_freq(struct cx18 *cx, u32 freq)
 		switch (freq) {
 		case 32000:
 			/* VID_PLL and AUX_PLL */
-			cx18_av_write4(cx, 0x108, 0x1006040f);
+			cx18_av_write4(cx, 0x108, 0x1408040f);
 
 			/* AUX_PLL_FRAC */
-			cx18_av_write4(cx, 0x110, 0x01bb39ee);
+			/* 0x8.9504318a * 28,636,363.636 / 0x14 = 32000 * 384 */
+			cx18_av_write4(cx, 0x110, 0x012a0863);
 
-			/* src3/4/6_ctl = 0x0801f77f */
+			/* src3/4/6_ctl */
+			/* 0x1.f77f = (4 * 15734.26) / 32000 */
 			cx18_av_write4(cx, 0x900, 0x0801f77f);
 			cx18_av_write4(cx, 0x904, 0x0801f77f);
 			cx18_av_write4(cx, 0x90c, 0x0801f77f);
+
+			/* SA_MCLK_SEL=1, SA_MCLK_DIV=0x14 */
+			cx18_av_write(cx, 0x127, 0x54);
+
+			/* AUD_COUNT = 0x2fff = 8 samples * 4 * 384 - 1 */
+			cx18_av_write4(cx, 0x12c, 0x11202fff);
+
+			/*
+			 * EN_AV_LOCK = 1
+			 * VID_COUNT = 0x0d2ef8 = 107999.000 * 8 =
+			 *  ((8 samples/32,000) * (13,500,000 * 8) * 4 - 1) * 8
+			 */
+			cx18_av_write4(cx, 0x128, 0xa10d2ef8);
 			break;
 
 		case 44100:
@@ -54,12 +68,24 @@ static int set_audclk_freq(struct cx18 *cx, u32 freq)
 			cx18_av_write4(cx, 0x108, 0x1009040f);
 
 			/* AUX_PLL_FRAC */
-			cx18_av_write4(cx, 0x110, 0x00ec6bd6);
+			/* 0x9.7635e7 * 28,636,363.63 / 0x10 = 44100 * 384 */
+			cx18_av_write4(cx, 0x110, 0x00ec6bce);
 
-			/* src3/4/6_ctl = 0x08016d59 */
+			/* src3/4/6_ctl */
+			/* 0x1.6d59 = (4 * 15734.26) / 44100 */
 			cx18_av_write4(cx, 0x900, 0x08016d59);
 			cx18_av_write4(cx, 0x904, 0x08016d59);
 			cx18_av_write4(cx, 0x90c, 0x08016d59);
+
+			/* AUD_COUNT = 0x92ff = 49 samples * 2 * 384 - 1 */
+			cx18_av_write4(cx, 0x12c, 0x112092ff);
+
+			/*
+			 * EN_AV_LOCK = 1
+			 * VID_COUNT = 0x1d4bf8 = 239999.000 * 8 =
+			 *  ((49 samples/44,100) * (13,500,000 * 8) * 2 - 1) * 8
+			 */
+			cx18_av_write4(cx, 0x128, 0xa11d4bf8);
 			break;
 
 		case 48000:
@@ -67,12 +93,24 @@ static int set_audclk_freq(struct cx18 *cx, u32 freq)
 			cx18_av_write4(cx, 0x108, 0x100a040f);
 
 			/* AUX_PLL_FRAC */
-			cx18_av_write4(cx, 0x110, 0x0098d6e5);
+			/* 0xa.4c6b6ea * 28,636,363.63 / 0x10 = 48000 * 384 */
+			cx18_av_write4(cx, 0x110, 0x0098d6dd);
 
-			/* src3/4/6_ctl = 0x08014faa */
+			/* src3/4/6_ctl */
+			/* 0x1.4faa = (4 * 15734.26) / 48000 */
 			cx18_av_write4(cx, 0x900, 0x08014faa);
 			cx18_av_write4(cx, 0x904, 0x08014faa);
 			cx18_av_write4(cx, 0x90c, 0x08014faa);
+
+			/* AUD_COUNT = 0x5fff = 4 samples * 16 * 384 - 1 */
+			cx18_av_write4(cx, 0x12c, 0x11205fff);
+
+			/*
+			 * EN_AV_LOCK = 1
+			 * VID_COUNT = 0x1193f8 = 143999.000 * 8 =
+			 *  ((4 samples/48,000) * (13,500,000 * 8) * 16 - 1) * 8
+			 */
+			cx18_av_write4(cx, 0x128, 0xa11193f8);
 			break;
 		}
 	} else {
@@ -82,18 +120,31 @@ static int set_audclk_freq(struct cx18 *cx, u32 freq)
 			cx18_av_write4(cx, 0x108, 0x1e08040f);
 
 			/* AUX_PLL_FRAC */
-			cx18_av_write4(cx, 0x110, 0x012a0869);
+			/* 0x8.9504318 * 28,636,363.63 / 0x1e = 32000 * 256 */
+			cx18_av_write4(cx, 0x110, 0x012a0863);
 
-			/* src1_ctl = 0x08010000 */
+			/* src1_ctl */
+			/* 0x1.0000 = 32000/32000 */
 			cx18_av_write4(cx, 0x8f8, 0x08010000);
 
-			/* src3/4/6_ctl = 0x08020000 */
+			/* src3/4/6_ctl */
+			/* 0x2.0000 = 2 * (32000/32000) */
 			cx18_av_write4(cx, 0x900, 0x08020000);
 			cx18_av_write4(cx, 0x904, 0x08020000);
 			cx18_av_write4(cx, 0x90c, 0x08020000);
 
 			/* SA_MCLK_SEL=1, SA_MCLK_DIV=0x14 */
 			cx18_av_write(cx, 0x127, 0x54);
+
+			/* AUD_COUNT = 0x1fff = 8 samples * 4 * 256 - 1 */
+			cx18_av_write4(cx, 0x12c, 0x11201fff);
+
+			/*
+			 * EN_AV_LOCK = 1
+			 * VID_COUNT = 0x0d2ef8 = 107999.000 * 8 =
+			 *  ((8 samples/32,000) * (13,500,000 * 8) * 4 - 1) * 8
+			 */
+			cx18_av_write4(cx, 0x128, 0xa10d2ef8);
 			break;
 
 		case 44100:
@@ -101,15 +152,28 @@ static int set_audclk_freq(struct cx18 *cx, u32 freq)
 			cx18_av_write4(cx, 0x108, 0x1809040f);
 
 			/* AUX_PLL_FRAC */
-			cx18_av_write4(cx, 0x110, 0x00ec6bd6);
+			/* 0x9.7635e74 * 28,636,363.63 / 0x18 = 44100 * 256 */
+			cx18_av_write4(cx, 0x110, 0x00ec6bce);
 
-			/* src1_ctl = 0x08010000 */
+			/* src1_ctl */
+			/* 0x1.60cd = 44100/32000 */
 			cx18_av_write4(cx, 0x8f8, 0x080160cd);
 
-			/* src3/4/6_ctl = 0x08020000 */
+			/* src3/4/6_ctl */
+			/* 0x1.7385 = 2 * (32000/44100) */
 			cx18_av_write4(cx, 0x900, 0x08017385);
 			cx18_av_write4(cx, 0x904, 0x08017385);
 			cx18_av_write4(cx, 0x90c, 0x08017385);
+
+			/* AUD_COUNT = 0x61ff = 49 samples * 2 * 256 - 1 */
+			cx18_av_write4(cx, 0x12c, 0x112061ff);
+
+			/*
+			 * EN_AV_LOCK = 1
+			 * VID_COUNT = 0x1d4bf8 = 239999.000 * 8 =
+			 *  ((49 samples/44,100) * (13,500,000 * 8) * 2 - 1) * 8
+			 */
+			cx18_av_write4(cx, 0x128, 0xa11d4bf8);
 			break;
 
 		case 48000:
@@ -117,15 +181,28 @@ static int set_audclk_freq(struct cx18 *cx, u32 freq)
 			cx18_av_write4(cx, 0x108, 0x180a040f);
 
 			/* AUX_PLL_FRAC */
-			cx18_av_write4(cx, 0x110, 0x0098d6e5);
+			/* 0xa.4c6b6ea * 28,636,363.63 / 0x18 = 48000 * 256 */
+			cx18_av_write4(cx, 0x110, 0x0098d6dd);
 
-			/* src1_ctl = 0x08010000 */
+			/* src1_ctl */
+			/* 0x1.8000 = 48000/32000 */
 			cx18_av_write4(cx, 0x8f8, 0x08018000);
 
-			/* src3/4/6_ctl = 0x08020000 */
+			/* src3/4/6_ctl */
+			/* 0x1.5555 = 2 * (32000/48000) */
 			cx18_av_write4(cx, 0x900, 0x08015555);
 			cx18_av_write4(cx, 0x904, 0x08015555);
 			cx18_av_write4(cx, 0x90c, 0x08015555);
+
+			/* AUD_COUNT = 0x3fff = 4 samples * 16 * 256 - 1 */
+			cx18_av_write4(cx, 0x12c, 0x11203fff);
+
+			/*
+			 * EN_AV_LOCK = 1
+			 * VID_COUNT = 0x1193f8 = 143999.000 * 8 =
+			 *  ((4 samples/48,000) * (13,500,000 * 8) * 16 - 1) * 8
+			 */
+			cx18_av_write4(cx, 0x128, 0xa11193f8);
 			break;
 		}
 	}
diff --git a/drivers/media/video/cx18/cx18-driver.h b/drivers/media/video/cx18/cx18-driver.h
index 45e31b04730e..4801bc7fb5b2 100644
--- a/drivers/media/video/cx18/cx18-driver.h
+++ b/drivers/media/video/cx18/cx18-driver.h
@@ -46,6 +46,7 @@
 #include <linux/dvb/video.h>
 #include <linux/dvb/audio.h>
 #include <media/v4l2-common.h>
+#include <media/v4l2-ioctl.h>
 #include <media/tuner.h>
 #include "cx18-mailbox.h"
 #include "cx18-av-core.h"
diff --git a/drivers/media/video/cx18/cx18-firmware.c b/drivers/media/video/cx18/cx18-firmware.c
index 2d630d9f7496..78fadd2ada5d 100644
--- a/drivers/media/video/cx18/cx18-firmware.c
+++ b/drivers/media/video/cx18/cx18-firmware.c
@@ -86,10 +86,6 @@
 
 #define CX18_DSP0_INTERRUPT_MASK     	0xd0004C
 
-/* Encoder/decoder firmware sizes */
-#define CX18_FW_CPU_SIZE 		(158332)
-#define CX18_FW_APU_SIZE 		(141200)
-
 #define APU_ROM_SYNC1 0x6D676553 /* "mgeS" */
 #define APU_ROM_SYNC2 0x72646548 /* "rdeH" */
 
@@ -100,35 +96,22 @@ struct cx18_apu_rom_seghdr {
 	u32 size;
 };
 
-static int load_cpu_fw_direct(const char *fn, u8 __iomem *mem, struct cx18 *cx, long size)
+static int load_cpu_fw_direct(const char *fn, u8 __iomem *mem, struct cx18 *cx)
 {
 	const struct firmware *fw = NULL;
-	int retries = 3;
 	int i, j;
+	unsigned size;
 	u32 __iomem *dst = (u32 __iomem *)mem;
 	const u32 *src;
 
-retry:
-	if (!retries || request_firmware(&fw, fn, &cx->dev->dev)) {
-		CX18_ERR("Unable to open firmware %s (must be %ld bytes)\n",
-				fn, size);
+	if (request_firmware(&fw, fn, &cx->dev->dev)) {
+		CX18_ERR("Unable to open firmware %s\n", fn);
 		CX18_ERR("Did you put the firmware in the hotplug firmware directory?\n");
 		return -ENOMEM;
 	}
 
 	src = (const u32 *)fw->data;
 
-	if (fw->size != size) {
-		/* Due to race conditions in firmware loading (esp. with
-		   udev <0.95) the wrong file was sometimes loaded. So we check
-		   filesizes to see if at least the right-sized file was
-		   loaded. If not, then we retry. */
-		CX18_INFO("retry: file loaded was not %s (expected size %ld, got %zd)\n",
-				fn, size, fw->size);
-		release_firmware(fw);
-		retries--;
-		goto retry;
-	}
 	for (i = 0; i < fw->size; i += 4096) {
 		setup_page(i);
 		for (j = i; j < fw->size && j < i + 4096; j += 4) {
@@ -145,15 +128,16 @@ retry:
 	}
 	if (!test_bit(CX18_F_I_LOADED_FW, &cx->i_flags))
 		CX18_INFO("loaded %s firmware (%zd bytes)\n", fn, fw->size);
+	size = fw->size;
 	release_firmware(fw);
 	return size;
 }
 
-static int load_apu_fw_direct(const char *fn, u8 __iomem *dst, struct cx18 *cx, long size)
+static int load_apu_fw_direct(const char *fn, u8 __iomem *dst, struct cx18 *cx)
 {
 	const struct firmware *fw = NULL;
-	int retries = 3;
 	int i, j;
+	unsigned size;
 	const u32 *src;
 	struct cx18_apu_rom_seghdr seghdr;
 	const u8 *vers;
@@ -161,10 +145,8 @@ static int load_apu_fw_direct(const char *fn, u8 __iomem *dst, struct cx18 *cx,
 	u32 apu_version = 0;
 	int sz;
 
-retry:
-	if (!retries || request_firmware(&fw, fn, &cx->dev->dev)) {
-		CX18_ERR("unable to open firmware %s (must be %ld bytes)\n",
-				fn, size);
+	if (request_firmware(&fw, fn, &cx->dev->dev)) {
+		CX18_ERR("unable to open firmware %s\n", fn);
 		CX18_ERR("did you put the firmware in the hotplug firmware directory?\n");
 		return -ENOMEM;
 	}
@@ -173,19 +155,8 @@ retry:
 	vers = fw->data + sizeof(seghdr);
 	sz = fw->size;
 
-	if (fw->size != size) {
-		/* Due to race conditions in firmware loading (esp. with
-		   udev <0.95) the wrong file was sometimes loaded. So we check
-		   filesizes to see if at least the right-sized file was
-		   loaded. If not, then we retry. */
-		CX18_INFO("retry: file loaded was not %s (expected size %ld, got %zd)\n",
-			       fn, size, fw->size);
-		release_firmware(fw);
-		retries--;
-		goto retry;
-	}
 	apu_version = (vers[0] << 24) | (vers[4] << 16) | vers[32];
-	while (offset + sizeof(seghdr) < size) {
+	while (offset + sizeof(seghdr) < fw->size) {
 		/* TODO: byteswapping */
 		memcpy(&seghdr, src + offset / 4, sizeof(seghdr));
 		offset += sizeof(seghdr);
@@ -215,6 +186,7 @@ retry:
 	if (!test_bit(CX18_F_I_LOADED_FW, &cx->i_flags))
 		CX18_INFO("loaded %s firmware V%08x (%zd bytes)\n",
 				fn, apu_version, fw->size);
+	size = fw->size;
 	release_firmware(fw);
 	/* Clear bit0 for APU to start from 0 */
 	write_reg(read_reg(0xc72030) & ~1, 0xc72030);
@@ -340,7 +312,7 @@ int cx18_firmware_init(struct cx18 *cx)
 	/* Only if the processor is not running */
 	if (read_reg(CX18_PROC_SOFT_RESET) & 8) {
 		int sz = load_apu_fw_direct("v4l-cx23418-apu.fw",
-			       cx->enc_mem, cx, CX18_FW_APU_SIZE);
+			       cx->enc_mem, cx);
 
 		write_enc(0xE51FF004, 0);
 		write_enc(0xa00000, 4);  /* todo: not hardcoded */
@@ -348,7 +320,7 @@ int cx18_firmware_init(struct cx18 *cx)
 		cx18_msleep_timeout(500, 0);
 
 		sz = sz <= 0 ? sz : load_cpu_fw_direct("v4l-cx23418-cpu.fw",
-					cx->enc_mem, cx, CX18_FW_CPU_SIZE);
+					cx->enc_mem, cx);
 
 		if (sz > 0) {
 			int retries = 0;
diff --git a/drivers/media/video/cx18/cx18-ioctl.c b/drivers/media/video/cx18/cx18-ioctl.c
index 0d74e59e503e..a7f839631d6a 100644
--- a/drivers/media/video/cx18/cx18-ioctl.c
+++ b/drivers/media/video/cx18/cx18-ioctl.c
@@ -787,50 +787,54 @@ int cx18_v4l2_ioctl(struct inode *inode, struct file *filp, unsigned int cmd,
 	return res;
 }
 
-void cx18_set_funcs(struct video_device *vdev)
-{
-	vdev->vidioc_querycap                = cx18_querycap;
-	vdev->vidioc_g_priority              = cx18_g_priority;
-	vdev->vidioc_s_priority              = cx18_s_priority;
-	vdev->vidioc_s_audio                 = cx18_s_audio;
-	vdev->vidioc_g_audio                 = cx18_g_audio;
-	vdev->vidioc_enumaudio               = cx18_enumaudio;
-	vdev->vidioc_enum_input              = cx18_enum_input;
-	vdev->vidioc_cropcap                 = cx18_cropcap;
-	vdev->vidioc_s_crop                  = cx18_s_crop;
-	vdev->vidioc_g_crop                  = cx18_g_crop;
-	vdev->vidioc_g_input                 = cx18_g_input;
-	vdev->vidioc_s_input                 = cx18_s_input;
-	vdev->vidioc_g_frequency             = cx18_g_frequency;
-	vdev->vidioc_s_frequency             = cx18_s_frequency;
-	vdev->vidioc_s_tuner                 = cx18_s_tuner;
-	vdev->vidioc_g_tuner                 = cx18_g_tuner;
-	vdev->vidioc_g_enc_index             = cx18_g_enc_index;
-	vdev->vidioc_g_std                   = cx18_g_std;
-	vdev->vidioc_s_std                   = cx18_s_std;
-	vdev->vidioc_log_status              = cx18_log_status;
-	vdev->vidioc_enum_fmt_vid_cap        = cx18_enum_fmt_vid_cap;
-	vdev->vidioc_encoder_cmd             = cx18_encoder_cmd;
-	vdev->vidioc_try_encoder_cmd         = cx18_try_encoder_cmd;
-	vdev->vidioc_g_fmt_vid_cap           = cx18_g_fmt_vid_cap;
-	vdev->vidioc_g_fmt_vbi_cap           = cx18_g_fmt_vbi_cap;
-	vdev->vidioc_g_fmt_sliced_vbi_cap    = cx18_g_fmt_sliced_vbi_cap;
-	vdev->vidioc_s_fmt_vid_cap           = cx18_s_fmt_vid_cap;
-	vdev->vidioc_s_fmt_vbi_cap           = cx18_s_fmt_vbi_cap;
-	vdev->vidioc_s_fmt_sliced_vbi_cap    = cx18_s_fmt_sliced_vbi_cap;
-	vdev->vidioc_try_fmt_vid_cap         = cx18_try_fmt_vid_cap;
-	vdev->vidioc_try_fmt_vbi_cap         = cx18_try_fmt_vbi_cap;
-	vdev->vidioc_try_fmt_sliced_vbi_cap  = cx18_try_fmt_sliced_vbi_cap;
-	vdev->vidioc_g_sliced_vbi_cap        = cx18_g_sliced_vbi_cap;
-	vdev->vidioc_g_chip_ident            = cx18_g_chip_ident;
+static const struct v4l2_ioctl_ops cx18_ioctl_ops = {
+	.vidioc_querycap                = cx18_querycap,
+	.vidioc_g_priority              = cx18_g_priority,
+	.vidioc_s_priority              = cx18_s_priority,
+	.vidioc_s_audio                 = cx18_s_audio,
+	.vidioc_g_audio                 = cx18_g_audio,
+	.vidioc_enumaudio               = cx18_enumaudio,
+	.vidioc_enum_input              = cx18_enum_input,
+	.vidioc_cropcap                 = cx18_cropcap,
+	.vidioc_s_crop                  = cx18_s_crop,
+	.vidioc_g_crop                  = cx18_g_crop,
+	.vidioc_g_input                 = cx18_g_input,
+	.vidioc_s_input                 = cx18_s_input,
+	.vidioc_g_frequency             = cx18_g_frequency,
+	.vidioc_s_frequency             = cx18_s_frequency,
+	.vidioc_s_tuner                 = cx18_s_tuner,
+	.vidioc_g_tuner                 = cx18_g_tuner,
+	.vidioc_g_enc_index             = cx18_g_enc_index,
+	.vidioc_g_std                   = cx18_g_std,
+	.vidioc_s_std                   = cx18_s_std,
+	.vidioc_log_status              = cx18_log_status,
+	.vidioc_enum_fmt_vid_cap        = cx18_enum_fmt_vid_cap,
+	.vidioc_encoder_cmd             = cx18_encoder_cmd,
+	.vidioc_try_encoder_cmd         = cx18_try_encoder_cmd,
+	.vidioc_g_fmt_vid_cap           = cx18_g_fmt_vid_cap,
+	.vidioc_g_fmt_vbi_cap           = cx18_g_fmt_vbi_cap,
+	.vidioc_g_fmt_sliced_vbi_cap    = cx18_g_fmt_sliced_vbi_cap,
+	.vidioc_s_fmt_vid_cap           = cx18_s_fmt_vid_cap,
+	.vidioc_s_fmt_vbi_cap           = cx18_s_fmt_vbi_cap,
+	.vidioc_s_fmt_sliced_vbi_cap    = cx18_s_fmt_sliced_vbi_cap,
+	.vidioc_try_fmt_vid_cap         = cx18_try_fmt_vid_cap,
+	.vidioc_try_fmt_vbi_cap         = cx18_try_fmt_vbi_cap,
+	.vidioc_try_fmt_sliced_vbi_cap  = cx18_try_fmt_sliced_vbi_cap,
+	.vidioc_g_sliced_vbi_cap        = cx18_g_sliced_vbi_cap,
+	.vidioc_g_chip_ident            = cx18_g_chip_ident,
 #ifdef CONFIG_VIDEO_ADV_DEBUG
-	vdev->vidioc_g_register              = cx18_g_register;
-	vdev->vidioc_s_register              = cx18_s_register;
+	.vidioc_g_register              = cx18_g_register,
+	.vidioc_s_register              = cx18_s_register,
 #endif
-	vdev->vidioc_default                 = cx18_default;
-	vdev->vidioc_queryctrl               = cx18_queryctrl;
-	vdev->vidioc_querymenu               = cx18_querymenu;
-	vdev->vidioc_g_ext_ctrls             = cx18_g_ext_ctrls;
-	vdev->vidioc_s_ext_ctrls             = cx18_s_ext_ctrls;
-	vdev->vidioc_try_ext_ctrls           = cx18_try_ext_ctrls;
+	.vidioc_default                 = cx18_default,
+	.vidioc_queryctrl               = cx18_queryctrl,
+	.vidioc_querymenu               = cx18_querymenu,
+	.vidioc_g_ext_ctrls             = cx18_g_ext_ctrls,
+	.vidioc_s_ext_ctrls             = cx18_s_ext_ctrls,
+	.vidioc_try_ext_ctrls           = cx18_try_ext_ctrls,
+};
+
+void cx18_set_funcs(struct video_device *vdev)
+{
+	vdev->ioctl_ops = &cx18_ioctl_ops;
 }
diff --git a/drivers/media/video/cx18/cx18-streams.c b/drivers/media/video/cx18/cx18-streams.c
index 1728b1d832a9..0da57f583bf7 100644
--- a/drivers/media/video/cx18/cx18-streams.c
+++ b/drivers/media/video/cx18/cx18-streams.c
@@ -187,14 +187,11 @@ static int cx18_prep_dev(struct cx18 *cx, int type)
 		return -ENOMEM;
 	}
 
-	s->v4l2dev->type =
-		VID_TYPE_CAPTURE | VID_TYPE_TUNER | VID_TYPE_TELETEXT |
-		VID_TYPE_CLIPPING | VID_TYPE_SCALES | VID_TYPE_MPEG_ENCODER;
 	snprintf(s->v4l2dev->name, sizeof(s->v4l2dev->name), "cx18-%d",
 			cx->num);
 
 	s->v4l2dev->minor = minor;
-	s->v4l2dev->dev = &cx->dev->dev;
+	s->v4l2dev->parent = &cx->dev->dev;
 	s->v4l2dev->fops = cx18_stream_info[type].fops;
 	s->v4l2dev->release = video_device_release;
 	s->v4l2dev->tvnorms = V4L2_STD_ALL;
diff --git a/drivers/media/video/cx23885/Kconfig b/drivers/media/video/cx23885/Kconfig
index 5cfb46bbdaa9..e60bd31b51a3 100644
--- a/drivers/media/video/cx23885/Kconfig
+++ b/drivers/media/video/cx23885/Kconfig
@@ -1,9 +1,7 @@
 config VIDEO_CX23885
 	tristate "Conexant cx23885 (2388x successor) support"
 	depends on DVB_CORE && VIDEO_DEV && PCI && I2C && INPUT
-	depends on HOTPLUG	# due to FW_LOADER
 	select I2C_ALGOBIT
-	select FW_LOADER
 	select VIDEO_BTCX
 	select VIDEO_TUNER
 	select VIDEO_TVEEPROM
diff --git a/drivers/media/video/cx23885/cx23885-417.c b/drivers/media/video/cx23885/cx23885-417.c
index e7ef093265af..8118091568fc 100644
--- a/drivers/media/video/cx23885/cx23885-417.c
+++ b/drivers/media/video/cx23885/cx23885-417.c
@@ -32,6 +32,7 @@
 #include <linux/device.h>
 #include <linux/firmware.h>
 #include <media/v4l2-common.h>
+#include <media/v4l2-ioctl.h>
 #include <media/cx2341x.h>
 
 #include "cx23885.h"
@@ -1699,14 +1700,7 @@ static struct file_operations mpeg_fops = {
 	.llseek        = no_llseek,
 };
 
-static struct video_device cx23885_mpeg_template = {
-	.name          = "cx23885",
-	.type          = VID_TYPE_CAPTURE |
-				VID_TYPE_TUNER |
-				VID_TYPE_SCALES |
-				VID_TYPE_MPEG_ENCODER,
-	.fops          = &mpeg_fops,
-	.minor         = -1,
+static const struct v4l2_ioctl_ops mpeg_ioctl_ops = {
 	.vidioc_s_std		 = vidioc_s_std,
 	.vidioc_enum_input	 = vidioc_enum_input,
 	.vidioc_g_input		 = vidioc_g_input,
@@ -1735,6 +1729,13 @@ static struct video_device cx23885_mpeg_template = {
 	.vidioc_queryctrl	 = vidioc_queryctrl,
 };
 
+static struct video_device cx23885_mpeg_template = {
+	.name          = "cx23885",
+	.fops          = &mpeg_fops,
+	.ioctl_ops     = &mpeg_ioctl_ops,
+	.minor         = -1,
+};
+
 void cx23885_417_unregister(struct cx23885_dev *dev)
 {
 	dprintk(1, "%s()\n", __func__);
@@ -1766,7 +1767,7 @@ static struct video_device *cx23885_video_dev_alloc(
 	vfd->minor   = -1;
 	snprintf(vfd->name, sizeof(vfd->name), "%s %s (%s)", dev->name,
 		type, cx23885_boards[tsport->dev->board].name);
-	vfd->dev     = &pci->dev;
+	vfd->parent  = &pci->dev;
 	vfd->release = video_device_release;
 	return vfd;
 }
diff --git a/drivers/media/video/cx23885/cx23885-cards.c b/drivers/media/video/cx23885/cx23885-cards.c
index fd7112c11d35..a19de850955d 100644
--- a/drivers/media/video/cx23885/cx23885-cards.c
+++ b/drivers/media/video/cx23885/cx23885-cards.c
@@ -145,6 +145,7 @@ struct cx23885_board cx23885_boards[] = {
 	},
 	[CX23885_BOARD_DVICO_FUSIONHDTV_7_DUAL_EXP] = {
 		.name		= "DViCO FusionHDTV7 Dual Express",
+		.portb		= CX23885_MPEG_DVB,
 		.portc		= CX23885_MPEG_DVB,
 	},
 };
@@ -325,25 +326,41 @@ int cx23885_tuner_callback(void *priv, int command, int arg)
 {
 	struct cx23885_i2c *bus = priv;
 	struct cx23885_dev *dev = bus->dev;
+	u32 bitmask = 0;
+
+	if (command != 0) {
+		printk(KERN_ERR "%s(): Unknown command 0x%x.\n",
+			__func__, command);
+		return -EINVAL;
+	}
 
 	switch(dev->board) {
 	case CX23885_BOARD_HAUPPAUGE_HVR1500Q:
-		if(command == 0) {	/* Tuner Reset Command from xc5000 */
-			/* Drive the tuner into reset and out */
-			cx_clear(GP0_IO, 0x00000004);
-			mdelay(200);
-			cx_set(GP0_IO, 0x00000004);
-			return 0;
-		}
-		else {
-			printk(KERN_ERR
-				"%s(): Unknow command.\n", __func__);
-			return -EINVAL;
+		/* Tuner Reset Command from xc5000 */
+		if (command == 0)
+			bitmask = 0x04;
+		break;
+	case CX23885_BOARD_DVICO_FUSIONHDTV_7_DUAL_EXP:
+		if (command == 0) {
+
+			/* Two identical tuners on two different i2c buses,
+			 * we need to reset the correct gpio. */
+			if (bus->nr == 0)
+				bitmask = 0x01;
+			else if (bus->nr == 1)
+				bitmask = 0x04;
 		}
 		break;
 	}
 
-	return 0; /* Should never be here */
+	if (bitmask) {
+		/* Drive the tuner into reset and back out */
+		cx_clear(GP0_IO, bitmask);
+		mdelay(200);
+		cx_set(GP0_IO, bitmask);
+	}
+
+	return 0;
 }
 
 void cx23885_gpio_setup(struct cx23885_dev *dev)
@@ -435,6 +452,19 @@ void cx23885_gpio_setup(struct cx23885_dev *dev)
 		mdelay(20);
 		cx_set(GP0_IO, 0x00050005);
 		break;
+	case CX23885_BOARD_DVICO_FUSIONHDTV_7_DUAL_EXP:
+		/* GPIO-0 xc5000 tuner reset i2c bus 0 */
+		/* GPIO-1 s5h1409 demod reset i2c bus 0 */
+		/* GPIO-2 xc5000 tuner reset i2c bus 1 */
+		/* GPIO-3 s5h1409 demod reset i2c bus 0 */
+
+		/* Put the parts into reset and back */
+		cx_set(GP0_IO, 0x000f0000);
+		mdelay(20);
+		cx_clear(GP0_IO, 0x0000000f);
+		mdelay(20);
+		cx_set(GP0_IO, 0x000f000f);
+		break;
 	}
 }
 
diff --git a/drivers/media/video/cx23885/cx23885-core.c b/drivers/media/video/cx23885/cx23885-core.c
index d17343ea0d33..6286a9cf957e 100644
--- a/drivers/media/video/cx23885/cx23885-core.c
+++ b/drivers/media/video/cx23885/cx23885-core.c
@@ -76,6 +76,117 @@ LIST_HEAD(cx23885_devlist);
  * 0x00010ea0 0x00010xxx Free
  */
 
+static struct sram_channel cx23885_sram_channels[] = {
+	[SRAM_CH01] = {
+		.name		= "VID A",
+		.cmds_start	= 0x10000,
+		.ctrl_start	= 0x10380,
+		.cdt		= 0x104c0,
+		.fifo_start	= 0x40,
+		.fifo_size	= 0x2800,
+		.ptr1_reg	= DMA1_PTR1,
+		.ptr2_reg	= DMA1_PTR2,
+		.cnt1_reg	= DMA1_CNT1,
+		.cnt2_reg	= DMA1_CNT2,
+	},
+	[SRAM_CH02] = {
+		.name		= "ch2",
+		.cmds_start	= 0x0,
+		.ctrl_start	= 0x0,
+		.cdt		= 0x0,
+		.fifo_start	= 0x0,
+		.fifo_size	= 0x0,
+		.ptr1_reg	= DMA2_PTR1,
+		.ptr2_reg	= DMA2_PTR2,
+		.cnt1_reg	= DMA2_CNT1,
+		.cnt2_reg	= DMA2_CNT2,
+	},
+	[SRAM_CH03] = {
+		.name		= "TS1 B",
+		.cmds_start	= 0x100A0,
+		.ctrl_start	= 0x10400,
+		.cdt		= 0x10580,
+		.fifo_start	= 0x5000,
+		.fifo_size	= 0x1000,
+		.ptr1_reg	= DMA3_PTR1,
+		.ptr2_reg	= DMA3_PTR2,
+		.cnt1_reg	= DMA3_CNT1,
+		.cnt2_reg	= DMA3_CNT2,
+	},
+	[SRAM_CH04] = {
+		.name		= "ch4",
+		.cmds_start	= 0x0,
+		.ctrl_start	= 0x0,
+		.cdt		= 0x0,
+		.fifo_start	= 0x0,
+		.fifo_size	= 0x0,
+		.ptr1_reg	= DMA4_PTR1,
+		.ptr2_reg	= DMA4_PTR2,
+		.cnt1_reg	= DMA4_CNT1,
+		.cnt2_reg	= DMA4_CNT2,
+	},
+	[SRAM_CH05] = {
+		.name		= "ch5",
+		.cmds_start	= 0x0,
+		.ctrl_start	= 0x0,
+		.cdt		= 0x0,
+		.fifo_start	= 0x0,
+		.fifo_size	= 0x0,
+		.ptr1_reg	= DMA5_PTR1,
+		.ptr2_reg	= DMA5_PTR2,
+		.cnt1_reg	= DMA5_CNT1,
+		.cnt2_reg	= DMA5_CNT2,
+	},
+	[SRAM_CH06] = {
+		.name		= "TS2 C",
+		.cmds_start	= 0x10140,
+		.ctrl_start	= 0x10440,
+		.cdt		= 0x105e0,
+		.fifo_start	= 0x6000,
+		.fifo_size	= 0x1000,
+		.ptr1_reg	= DMA5_PTR1,
+		.ptr2_reg	= DMA5_PTR2,
+		.cnt1_reg	= DMA5_CNT1,
+		.cnt2_reg	= DMA5_CNT2,
+	},
+	[SRAM_CH07] = {
+		.name		= "ch7",
+		.cmds_start	= 0x0,
+		.ctrl_start	= 0x0,
+		.cdt		= 0x0,
+		.fifo_start	= 0x0,
+		.fifo_size	= 0x0,
+		.ptr1_reg	= DMA6_PTR1,
+		.ptr2_reg	= DMA6_PTR2,
+		.cnt1_reg	= DMA6_CNT1,
+		.cnt2_reg	= DMA6_CNT2,
+	},
+	[SRAM_CH08] = {
+		.name		= "ch8",
+		.cmds_start	= 0x0,
+		.ctrl_start	= 0x0,
+		.cdt		= 0x0,
+		.fifo_start	= 0x0,
+		.fifo_size	= 0x0,
+		.ptr1_reg	= DMA7_PTR1,
+		.ptr2_reg	= DMA7_PTR2,
+		.cnt1_reg	= DMA7_CNT1,
+		.cnt2_reg	= DMA7_CNT2,
+	},
+	[SRAM_CH09] = {
+		.name		= "ch9",
+		.cmds_start	= 0x0,
+		.ctrl_start	= 0x0,
+		.cdt		= 0x0,
+		.fifo_start	= 0x0,
+		.fifo_size	= 0x0,
+		.ptr1_reg	= DMA8_PTR1,
+		.ptr2_reg	= DMA8_PTR2,
+		.cnt1_reg	= DMA8_CNT1,
+		.cnt2_reg	= DMA8_CNT2,
+	},
+};
+
 static struct sram_channel cx23887_sram_channels[] = {
 	[SRAM_CH01] = {
 		.name		= "VID A",
@@ -104,8 +215,8 @@ static struct sram_channel cx23887_sram_channels[] = {
 	[SRAM_CH03] = {
 		.name		= "TS1 B",
 		.cmds_start	= 0x100A0,
-		.ctrl_start	= 0x10780,
-		.cdt		= 0x10400,
+		.ctrl_start	= 0x10630,
+		.cdt		= 0x10870,
 		.fifo_start	= 0x5000,
 		.fifo_size	= 0x1000,
 		.ptr1_reg	= DMA3_PTR1,
@@ -140,7 +251,7 @@ static struct sram_channel cx23887_sram_channels[] = {
 	[SRAM_CH06] = {
 		.name		= "TS2 C",
 		.cmds_start	= 0x10140,
-		.ctrl_start	= 0x10680,
+		.ctrl_start	= 0x10670,
 		.cdt		= 0x108d0,
 		.fifo_start	= 0x6000,
 		.fifo_size	= 0x1000,
@@ -460,6 +571,7 @@ static void cx23885_reset(struct cx23885_dev *dev)
 	cx_write(AUDIO_INT_INT_STAT, 0xffffffff);
 	cx_write(AUDIO_EXT_INT_STAT, 0xffffffff);
 	cx_write(CLK_DELAY, cx_read(CLK_DELAY) & 0x80000000);
+	cx_write(PAD_CTRL, 0x00500300);
 
 	mdelay(100);
 
@@ -625,7 +737,6 @@ static int cx23885_dev_setup(struct cx23885_dev *dev)
 	atomic_inc(&dev->refcount);
 
 	dev->nr = cx23885_devcount++;
-	dev->sram_channels = cx23887_sram_channels;
 	sprintf(dev->name, "cx23885[%d]", dev->nr);
 
 	mutex_lock(&devlist);
@@ -637,11 +748,13 @@ static int cx23885_dev_setup(struct cx23885_dev *dev)
 		dev->bridge = CX23885_BRIDGE_887;
 		/* Apply a sensible clock frequency for the PCIe bridge */
 		dev->clk_freq = 25000000;
+		dev->sram_channels = cx23887_sram_channels;
 	} else
 	if(dev->pci->device == 0x8852) {
 		dev->bridge = CX23885_BRIDGE_885;
 		/* Apply a sensible clock frequency for the PCIe bridge */
 		dev->clk_freq = 28000000;
+		dev->sram_channels = cx23885_sram_channels;
 	} else
 		BUG();
 
@@ -1010,8 +1123,9 @@ static void cx23885_tsport_reg_dump(struct cx23885_tsport *port)
 		port->reg_gpcnt_ctl, cx_read(port->reg_gpcnt_ctl));
 	dprintk(1, "%s() dma_ctl(0x%08X)        0x%08x\n", __func__,
 		port->reg_dma_ctl, cx_read(port->reg_dma_ctl));
-	dprintk(1, "%s() src_sel(0x%08X)        0x%08x\n", __func__,
-		port->reg_src_sel, cx_read(port->reg_src_sel));
+	if (port->reg_src_sel)
+		dprintk(1, "%s() src_sel(0x%08X)        0x%08x\n", __func__,
+			port->reg_src_sel, cx_read(port->reg_src_sel));
 	dprintk(1, "%s() lngth(0x%08X)          0x%08x\n", __func__,
 		port->reg_lngth, cx_read(port->reg_lngth));
 	dprintk(1, "%s() hw_sop_ctrl(0x%08X)    0x%08x\n", __func__,
@@ -1042,6 +1156,9 @@ static int cx23885_start_dma(struct cx23885_tsport *port,
 	dprintk(1, "%s() w: %d, h: %d, f: %d\n", __func__,
 		buf->vb.width, buf->vb.height, buf->vb.field);
 
+	/* Stop the fifo and risc engine for this port */
+	cx_clear(port->reg_dma_ctl, port->dma_ctl_val);
+
 	/* setup fifo + format */
 	cx23885_sram_channel_setup(dev,
 				   &dev->sram_channels[ port->sram_chno ],
@@ -1083,7 +1200,21 @@ static int cx23885_start_dma(struct cx23885_tsport *port,
 	cx_write(port->reg_gpcnt_ctl, 3);
 	q->count = 1;
 
-	if (cx23885_boards[dev->board].portb & CX23885_MPEG_ENCODER) {
+	/* Set VIDB pins to input */
+	if (cx23885_boards[dev->board].portb == CX23885_MPEG_DVB) {
+		reg = cx_read(PAD_CTRL);
+		reg &= ~0x3; /* Clear TS1_OE & TS1_SOP_OE */
+		cx_write(PAD_CTRL, reg);
+	}
+
+	/* Set VIDC pins to input */
+	if (cx23885_boards[dev->board].portc == CX23885_MPEG_DVB) {
+		reg = cx_read(PAD_CTRL);
+		reg &= ~0x4; /* Clear TS2_SOP_OE */
+		cx_write(PAD_CTRL, reg);
+	}
+
+	if (cx23885_boards[dev->board].portb == CX23885_MPEG_ENCODER) {
 
 		reg = cx_read(PAD_CTRL);
 		reg = reg & ~0x1;    /* Clear TS1_OE */
@@ -1133,7 +1264,7 @@ static int cx23885_stop_dma(struct cx23885_tsport *port)
 	cx_clear(port->reg_ts_int_msk, port->ts_int_msk_val);
 	cx_clear(port->reg_dma_ctl, port->dma_ctl_val);
 
-	if (cx23885_boards[dev->board].portb & CX23885_MPEG_ENCODER) {
+	if (cx23885_boards[dev->board].portb == CX23885_MPEG_ENCODER) {
 
 		reg = cx_read(PAD_CTRL);
 
diff --git a/drivers/media/video/cx23885/cx23885-video.c b/drivers/media/video/cx23885/cx23885-video.c
index 043fc4e5c586..ad2235dab5b1 100644
--- a/drivers/media/video/cx23885/cx23885-video.c
+++ b/drivers/media/video/cx23885/cx23885-video.c
@@ -33,6 +33,7 @@
 
 #include "cx23885.h"
 #include <media/v4l2-common.h>
+#include <media/v4l2-ioctl.h>
 
 #ifdef CONFIG_VIDEO_V4L1_COMPAT
 /* Include V4L1 specific functions. Should be removed soon */
@@ -326,7 +327,7 @@ struct video_device *cx23885_vdev_init(struct cx23885_dev *dev,
 		return NULL;
 	*vfd = *template;
 	vfd->minor   = -1;
-	vfd->dev     = &pci->dev;
+	vfd->parent  = &pci->dev;
 	vfd->release = video_device_release;
 	snprintf(vfd->name, sizeof(vfd->name), "%s %s (%s)",
 		 dev->name, type, cx23885_boards[dev->board].name);
@@ -1433,12 +1434,7 @@ static const struct file_operations video_fops = {
 	.llseek        = no_llseek,
 };
 
-static struct video_device cx23885_vbi_template;
-static struct video_device cx23885_video_template = {
-	.name                 = "cx23885-video",
-	.type                 = VID_TYPE_CAPTURE|VID_TYPE_TUNER|VID_TYPE_SCALES,
-	.fops                 = &video_fops,
-	.minor                = -1,
+static const struct v4l2_ioctl_ops video_ioctl_ops = {
 	.vidioc_querycap      = vidioc_querycap,
 	.vidioc_enum_fmt_vid_cap  = vidioc_enum_fmt_vid_cap,
 	.vidioc_g_fmt_vid_cap     = vidioc_g_fmt_vid_cap,
@@ -1471,6 +1467,14 @@ static struct video_device cx23885_video_template = {
 	.vidioc_g_register    = vidioc_g_register,
 	.vidioc_s_register    = vidioc_s_register,
 #endif
+};
+
+static struct video_device cx23885_vbi_template;
+static struct video_device cx23885_video_template = {
+	.name                 = "cx23885-video",
+	.fops                 = &video_fops,
+	.minor                = -1,
+	.ioctl_ops 	      = &video_ioctl_ops,
 	.tvnorms              = CX23885_NORMS,
 	.current_norm         = V4L2_STD_NTSC_M,
 };
@@ -1512,7 +1516,6 @@ int cx23885_video_register(struct cx23885_dev *dev)
 	memcpy(&cx23885_vbi_template, &cx23885_video_template,
 		sizeof(cx23885_vbi_template));
 	strcpy(cx23885_vbi_template.name, "cx23885-vbi");
-	cx23885_vbi_template.type = VID_TYPE_TELETEXT|VID_TYPE_TUNER;
 
 	dev->tvnorm = cx23885_video_template.current_norm;
 
diff --git a/drivers/media/video/cx25840/Kconfig b/drivers/media/video/cx25840/Kconfig
index 448f4cd0ce34..de515dadadc2 100644
--- a/drivers/media/video/cx25840/Kconfig
+++ b/drivers/media/video/cx25840/Kconfig
@@ -1,8 +1,6 @@
 config VIDEO_CX25840
 	tristate "Conexant CX2584x audio/video decoders"
 	depends on VIDEO_V4L2 && I2C && EXPERIMENTAL
-	depends on HOTPLUG # due to FW_LOADER
-	select FW_LOADER
 	---help---
 	  Support for the Conexant CX2584x audio/video decoders.
 
diff --git a/drivers/media/video/cx25840/cx25840-core.c b/drivers/media/video/cx25840/cx25840-core.c
index e7bf4f4c1319..209d3bcb5dbb 100644
--- a/drivers/media/video/cx25840/cx25840-core.c
+++ b/drivers/media/video/cx25840/cx25840-core.c
@@ -50,7 +50,7 @@ MODULE_LICENSE("GPL");
 
 static unsigned short normal_i2c[] = { 0x88 >> 1, I2C_CLIENT_END };
 
-int cx25840_debug;
+static int cx25840_debug;
 
 module_param_named(debug,cx25840_debug, int, 0644);
 
diff --git a/drivers/media/video/cx25840/cx25840-core.h b/drivers/media/video/cx25840/cx25840-core.h
index 72916ba975a8..b87337e590b4 100644
--- a/drivers/media/video/cx25840/cx25840-core.h
+++ b/drivers/media/video/cx25840/cx25840-core.h
@@ -24,8 +24,6 @@
 #include <linux/videodev2.h>
 #include <linux/i2c.h>
 
-extern int cx25840_debug;
-
 /* ENABLE_PVR150_WORKAROUND activates a workaround for a hardware bug that is
    present in Hauppauge PVR-150 (and possibly PVR-500) cards that have
    certain NTSC tuners (tveeprom tuner model numbers 85, 99 and 112). The
diff --git a/drivers/media/video/cx88/Kconfig b/drivers/media/video/cx88/Kconfig
index 10e20d8196dc..9dd7bdf659b9 100644
--- a/drivers/media/video/cx88/Kconfig
+++ b/drivers/media/video/cx88/Kconfig
@@ -33,9 +33,8 @@ config VIDEO_CX88_ALSA
 
 config VIDEO_CX88_BLACKBIRD
 	tristate "Blackbird MPEG encoder support (cx2388x + cx23416)"
-	depends on VIDEO_CX88 && HOTPLUG
+	depends on VIDEO_CX88
 	select VIDEO_CX2341X
-	select FW_LOADER
 	---help---
 	  This adds support for MPEG encoder cards based on the
 	  Blackbird reference design, using the Conexant 2388x
diff --git a/drivers/media/video/cx88/cx88-blackbird.c b/drivers/media/video/cx88/cx88-blackbird.c
index bfdca5847764..9a1374a38ec7 100644
--- a/drivers/media/video/cx88/cx88-blackbird.c
+++ b/drivers/media/video/cx88/cx88-blackbird.c
@@ -33,6 +33,7 @@
 #include <linux/device.h>
 #include <linux/firmware.h>
 #include <media/v4l2-common.h>
+#include <media/v4l2-ioctl.h>
 #include <media/cx2341x.h>
 
 #include "cx88.h"
@@ -1174,12 +1175,7 @@ static const struct file_operations mpeg_fops =
 	.llseek        = no_llseek,
 };
 
-static struct video_device cx8802_mpeg_template =
-{
-	.name                 = "cx8802",
-	.type                 = VID_TYPE_CAPTURE|VID_TYPE_TUNER|VID_TYPE_SCALES|VID_TYPE_MPEG_ENCODER,
-	.fops                 = &mpeg_fops,
-	.minor                = -1,
+static const struct v4l2_ioctl_ops mpeg_ioctl_ops = {
 	.vidioc_querymenu     = vidioc_querymenu,
 	.vidioc_querycap      = vidioc_querycap,
 	.vidioc_enum_fmt_vid_cap  = vidioc_enum_fmt_vid_cap,
@@ -1207,6 +1203,13 @@ static struct video_device cx8802_mpeg_template =
 	.vidioc_g_tuner       = vidioc_g_tuner,
 	.vidioc_s_tuner       = vidioc_s_tuner,
 	.vidioc_s_std         = vidioc_s_std,
+};
+
+static struct video_device cx8802_mpeg_template = {
+	.name                 = "cx8802",
+	.fops                 = &mpeg_fops,
+	.ioctl_ops 	      = &mpeg_ioctl_ops,
+	.minor                = -1,
 	.tvnorms              = CX88_NORMS,
 	.current_norm         = V4L2_STD_NTSC_M,
 };
diff --git a/drivers/media/video/cx88/cx88-cards.c b/drivers/media/video/cx88/cx88-cards.c
index fa6d398e97b9..de199a206a15 100644
--- a/drivers/media/video/cx88/cx88-cards.c
+++ b/drivers/media/video/cx88/cx88-cards.c
@@ -1348,7 +1348,7 @@ static const struct cx88_board cx88_boards[] = {
 		.tuner_addr	= ADDR_UNSET,
 		.radio_addr	= ADDR_UNSET,
 		.tda9887_conf   = TDA9887_PRESENT,
-		.audio_chip     = AUDIO_CHIP_WM8775,
+		.audio_chip     = V4L2_IDENT_WM8775,
 		.input		= {{
 			.type   = CX88_VMUX_TELEVISION,
 			.vmux   = 0,
diff --git a/drivers/media/video/cx88/cx88-core.c b/drivers/media/video/cx88/cx88-core.c
index 60eeda3057e9..d656fec59010 100644
--- a/drivers/media/video/cx88/cx88-core.c
+++ b/drivers/media/video/cx88/cx88-core.c
@@ -40,6 +40,7 @@
 
 #include "cx88.h"
 #include <media/v4l2-common.h>
+#include <media/v4l2-ioctl.h>
 
 MODULE_DESCRIPTION("v4l2 driver module for cx2388x based TV cards");
 MODULE_AUTHOR("Gerd Knorr <kraxel@bytesex.org> [SuSE Labs]");
@@ -1006,7 +1007,7 @@ struct video_device *cx88_vdev_init(struct cx88_core *core,
 		return NULL;
 	*vfd = *template;
 	vfd->minor   = -1;
-	vfd->dev     = &pci->dev;
+	vfd->parent  = &pci->dev;
 	vfd->release = video_device_release;
 	snprintf(vfd->name, sizeof(vfd->name), "%s %s (%s)",
 		 core->name, type, core->board.name);
diff --git a/drivers/media/video/cx88/cx88-video.c b/drivers/media/video/cx88/cx88-video.c
index 0fed5cd2ccea..ef4d56ea0027 100644
--- a/drivers/media/video/cx88/cx88-video.c
+++ b/drivers/media/video/cx88/cx88-video.c
@@ -39,6 +39,7 @@
 
 #include "cx88.h"
 #include <media/v4l2-common.h>
+#include <media/v4l2-ioctl.h>
 
 #ifdef CONFIG_VIDEO_V4L1_COMPAT
 /* Include V4L1 specific functions. Should be removed soon */
@@ -447,7 +448,7 @@ int cx88_video_mux(struct cx88_core *core, unsigned int input)
 		   the initialization. Some boards may use different
 		   routes for different inputs. HVR-1300 surely does */
 		if (core->board.audio_chip &&
-		    core->board.audio_chip == AUDIO_CHIP_WM8775) {
+		    core->board.audio_chip == V4L2_IDENT_WM8775) {
 			struct v4l2_routing route;
 
 			route.input = INPUT(input).audioroute;
@@ -1682,13 +1683,7 @@ static const struct file_operations video_fops =
 	.llseek        = no_llseek,
 };
 
-static struct video_device cx8800_vbi_template;
-static struct video_device cx8800_video_template =
-{
-	.name                 = "cx8800-video",
-	.type                 = VID_TYPE_CAPTURE|VID_TYPE_TUNER|VID_TYPE_SCALES,
-	.fops                 = &video_fops,
-	.minor                = -1,
+static const struct v4l2_ioctl_ops video_ioctl_ops = {
 	.vidioc_querycap      = vidioc_querycap,
 	.vidioc_enum_fmt_vid_cap  = vidioc_enum_fmt_vid_cap,
 	.vidioc_g_fmt_vid_cap     = vidioc_g_fmt_vid_cap,
@@ -1721,6 +1716,15 @@ static struct video_device cx8800_video_template =
 	.vidioc_g_register    = vidioc_g_register,
 	.vidioc_s_register    = vidioc_s_register,
 #endif
+};
+
+static struct video_device cx8800_vbi_template;
+
+static struct video_device cx8800_video_template = {
+	.name                 = "cx8800-video",
+	.fops                 = &video_fops,
+	.minor                = -1,
+	.ioctl_ops 	      = &video_ioctl_ops,
 	.tvnorms              = CX88_NORMS,
 	.current_norm         = V4L2_STD_NTSC_M,
 };
@@ -1735,12 +1739,7 @@ static const struct file_operations radio_fops =
 	.llseek        = no_llseek,
 };
 
-static struct video_device cx8800_radio_template =
-{
-	.name                 = "cx8800-radio",
-	.type                 = VID_TYPE_TUNER,
-	.fops                 = &radio_fops,
-	.minor                = -1,
+static const struct v4l2_ioctl_ops radio_ioctl_ops = {
 	.vidioc_querycap      = radio_querycap,
 	.vidioc_g_tuner       = radio_g_tuner,
 	.vidioc_enum_input    = radio_enum_input,
@@ -1759,6 +1758,13 @@ static struct video_device cx8800_radio_template =
 #endif
 };
 
+static struct video_device cx8800_radio_template = {
+	.name                 = "cx8800-radio",
+	.fops                 = &radio_fops,
+	.minor                = -1,
+	.ioctl_ops 	      = &radio_ioctl_ops,
+};
+
 /* ----------------------------------------------------------- */
 
 static void cx8800_unregister_video(struct cx8800_dev *dev)
@@ -1830,7 +1836,6 @@ static int __devinit cx8800_initdev(struct pci_dev *pci_dev,
 	memcpy( &cx8800_vbi_template, &cx8800_video_template,
 		sizeof(cx8800_vbi_template) );
 	strcpy(cx8800_vbi_template.name,"cx8800-vbi");
-	cx8800_vbi_template.type = VID_TYPE_TELETEXT|VID_TYPE_TUNER;
 
 	/* initialize driver struct */
 	spin_lock_init(&dev->slock);
@@ -1866,7 +1871,7 @@ static int __devinit cx8800_initdev(struct pci_dev *pci_dev,
 
 	/* load and configure helper modules */
 
-	if (core->board.audio_chip == AUDIO_CHIP_WM8775)
+	if (core->board.audio_chip == V4L2_IDENT_WM8775)
 		request_module("wm8775");
 
 	switch (core->boardnr) {
diff --git a/drivers/media/video/cx88/cx88.h b/drivers/media/video/cx88/cx88.h
index 14ac173f4071..54fe65094711 100644
--- a/drivers/media/video/cx88/cx88.h
+++ b/drivers/media/video/cx88/cx88.h
@@ -29,8 +29,8 @@
 #include <media/tuner.h>
 #include <media/tveeprom.h>
 #include <media/videobuf-dma-sg.h>
+#include <media/v4l2-chip-ident.h>
 #include <media/cx2341x.h>
-#include <media/audiochip.h>
 #if defined(CONFIG_VIDEO_CX88_DVB) || defined(CONFIG_VIDEO_CX88_DVB_MODULE)
 #include <media/videobuf-dvb.h>
 #endif
@@ -252,7 +252,7 @@ struct cx88_board {
 	struct cx88_input       input[MAX_CX88_INPUT];
 	struct cx88_input       radio;
 	enum cx88_board_type    mpeg;
-	enum audiochip          audio_chip;
+	unsigned int            audio_chip;
 };
 
 struct cx88_subid {
diff --git a/drivers/media/video/dabusb.c b/drivers/media/video/dabusb.c
index 48f4b92a8f8b..79faedf58521 100644
--- a/drivers/media/video/dabusb.c
+++ b/drivers/media/video/dabusb.c
@@ -403,6 +403,7 @@ static int dabusb_fpga_download (pdabusb_t s, const char *fname)
 	ret = request_firmware(&fw, "dabusb/bitstream.bin", &s->usbdev->dev);
 	if (ret) {
 		err("Failed to load \"dabusb/bitstream.bin\": %d\n", ret);
+		kfree(b);
 		return ret;
 	}
 
diff --git a/drivers/media/video/em28xx/em28xx-cards.c b/drivers/media/video/em28xx/em28xx-cards.c
index 05f0d5a15058..452da70e719f 100644
--- a/drivers/media/video/em28xx/em28xx-cards.c
+++ b/drivers/media/video/em28xx/em28xx-cards.c
@@ -32,8 +32,8 @@
 #include <media/saa7115.h>
 #include <media/tvp5150.h>
 #include <media/tveeprom.h>
-#include <media/audiochip.h>
 #include <media/v4l2-common.h>
+#include <media/v4l2-chip-ident.h>
 
 #include "em28xx.h"
 
@@ -52,6 +52,15 @@ struct em28xx_hash_table {
 };
 
 struct em28xx_board em28xx_boards[] = {
+	[EM2750_BOARD_UNKNOWN] = {
+		.name          = "Unknown EM2750/EM2751 webcam grabber",
+		.vchannels     = 1,
+		.input         = { {
+			.type     = EM28XX_VMUX_COMPOSITE1,
+			.vmux     = 0,
+			.amux     = 0,
+		} },
+	},
 	[EM2800_BOARD_UNKNOWN] = {
 		.name         = "Unknown EM2800 video grabber",
 		.is_em2800    = 1,
@@ -73,6 +82,39 @@ struct em28xx_board em28xx_boards[] = {
 		.is_em2800    = 0,
 		.tuner_type   = TUNER_ABSENT,
 	},
+	[EM2750_BOARD_DLCW_130] = {
+		/* Beijing Huaqi Information Digital Technology Co., Ltd */
+		.name          = "Huaqi DLCW-130",
+		.valid         = EM28XX_BOARD_NOT_VALIDATED,
+		.vchannels     = 1,
+		.input         = { {
+			.type     = EM28XX_VMUX_COMPOSITE1,
+			.vmux     = 0,
+			.amux     = 0,
+		} },
+	},
+	[EM2800_BOARD_KWORLD_USB2800] = {
+		.name         = "Kworld USB2800",
+		.valid        = EM28XX_BOARD_NOT_VALIDATED,
+		.is_em2800    = 1,
+		.vchannels    = 3,
+		.tuner_type   = TUNER_PHILIPS_FCV1236D,
+		.tda9887_conf = TDA9887_PRESENT,
+		.decoder      = EM28XX_SAA7113,
+		.input          = { {
+			.type     = EM28XX_VMUX_TELEVISION,
+			.vmux     = SAA7115_COMPOSITE2,
+			.amux     = 0,
+		}, {
+			.type     = EM28XX_VMUX_COMPOSITE1,
+			.vmux     = SAA7115_COMPOSITE0,
+			.amux     = 1,
+		}, {
+			.type     = EM28XX_VMUX_SVIDEO,
+			.vmux     = SAA7115_SVIDEO3,
+			.amux     = 1,
+		} },
+	},
 	[EM2820_BOARD_KWORLD_PVRTV2800RF] = {
 		.name         = "Kworld PVR TV 2800 RF",
 		.is_em2800    = 0,
@@ -151,6 +193,376 @@ struct em28xx_board em28xx_boards[] = {
 					MSP_DSP_IN_SCART, MSP_DSP_IN_SCART),
 		} },
 	},
+	[EM2820_BOARD_DLINK_USB_TV] = {
+		.name         = "D-Link DUB-T210 TV Tuner",
+		.valid        = EM28XX_BOARD_NOT_VALIDATED,
+		.vchannels    = 3,
+		.is_em2800    = 0,
+		.tuner_type   = TUNER_LG_PAL_NEW_TAPC,
+		.tda9887_conf = TDA9887_PRESENT,
+		.decoder      = EM28XX_SAA7113,
+		.input          = { {
+			.type     = EM28XX_VMUX_TELEVISION,
+			.vmux     = SAA7115_COMPOSITE2,
+			.amux     = 1,
+		}, {
+			.type     = EM28XX_VMUX_COMPOSITE1,
+			.vmux     = SAA7115_COMPOSITE0,
+			.amux     = 1,
+		}, {
+			.type     = EM28XX_VMUX_SVIDEO,
+			.vmux     = SAA7115_SVIDEO3,
+			.amux     = 1,
+		} },
+	},
+	[EM2820_BOARD_HERCULES_SMART_TV_USB2] = {
+		.name         = "Hercules Smart TV USB 2.0",
+		.valid        = EM28XX_BOARD_NOT_VALIDATED,
+		.vchannels    = 3,
+		.tuner_type   = TUNER_LG_PAL_NEW_TAPC,
+		.tda9887_conf = TDA9887_PRESENT,
+		.decoder      = EM28XX_SAA7113,
+		.input        = { {
+			.type     = EM28XX_VMUX_TELEVISION,
+			.vmux     = SAA7115_COMPOSITE2,
+			.amux     = 1,
+		}, {
+			.type     = EM28XX_VMUX_COMPOSITE1,
+			.vmux     = SAA7115_COMPOSITE0,
+			.amux     = 1,
+		}, {
+			.type     = EM28XX_VMUX_SVIDEO,
+			.vmux     = SAA7115_SVIDEO3,
+			.amux     = 1,
+		} },
+	},
+	[EM2820_BOARD_PINNACLE_USB_2_FM1216ME] = {
+		.name         = "Pinnacle PCTV USB 2 (Philips FM1216ME)",
+		.valid        = EM28XX_BOARD_NOT_VALIDATED,
+		.vchannels    = 3,
+		.is_em2800    = 0,
+		.tuner_type   = TUNER_PHILIPS_FM1216ME_MK3,
+		.tda9887_conf = TDA9887_PRESENT,
+		.decoder      = EM28XX_SAA7113,
+		.input          = { {
+			.type     = EM28XX_VMUX_TELEVISION,
+			.vmux     = SAA7115_COMPOSITE2,
+			.amux     = 0,
+		}, {
+			.type     = EM28XX_VMUX_COMPOSITE1,
+			.vmux     = SAA7115_COMPOSITE0,
+			.amux     = 1,
+		}, {
+			.type     = EM28XX_VMUX_SVIDEO,
+			.vmux     = SAA7115_SVIDEO3,
+			.amux     = 1,
+		} },
+	},
+	[EM2820_BOARD_GADMEI_UTV310] = {
+		.name         = "Gadmei UTV310",
+		.valid        = EM28XX_BOARD_NOT_VALIDATED,
+		.vchannels    = 3,
+		.tuner_type   = TUNER_TNF_5335MF,
+		.tda9887_conf = TDA9887_PRESENT,
+		.decoder      = EM28XX_SAA7113,
+		.input          = { {
+			.type     = EM28XX_VMUX_TELEVISION,
+			.vmux     = SAA7115_COMPOSITE1,
+			.amux     = 1,
+		}, {
+			.type     = EM28XX_VMUX_COMPOSITE1,
+			.vmux     = SAA7115_COMPOSITE0,
+			.amux     = 1,
+		}, {
+			.type     = EM28XX_VMUX_SVIDEO,
+			.vmux     = SAA7115_SVIDEO3,
+			.amux     = 1,
+		} },
+	},
+	[EM2820_BOARD_LEADTEK_WINFAST_USBII_DELUXE] = {
+		.name         = "Leadtek Winfast USB II Deluxe",
+		.valid        = EM28XX_BOARD_NOT_VALIDATED,
+		.vchannels    = 3,
+		.tuner_type   = TUNER_PHILIPS_FM1216ME_MK3,
+		.tda9887_conf = TDA9887_PRESENT,
+		.decoder      = EM28XX_SAA7114,
+		.input          = { {
+			.type     = EM28XX_VMUX_TELEVISION,
+			.vmux     = 2,
+			.amux     = 0,
+		}, {
+			.type     = EM28XX_VMUX_COMPOSITE1,
+			.vmux     = 0,
+			.amux     = 1,
+		}, {
+			.type     = EM28XX_VMUX_SVIDEO,
+			.vmux     = 9,
+			.amux     = 1,
+		} },
+	},
+	[EM2820_BOARD_PINNACLE_DVC_100] = {
+		.name         = "Pinnacle Dazzle DVC 100",
+		.valid        = EM28XX_BOARD_NOT_VALIDATED,
+		.vchannels    = 3,
+		.decoder      = EM28XX_SAA7113,
+		.input          = { {
+			.type     = EM28XX_VMUX_COMPOSITE1,
+			.vmux     = SAA7115_COMPOSITE0,
+			.amux     = 1,
+		}, {
+			.type     = EM28XX_VMUX_SVIDEO,
+			.vmux     = SAA7115_SVIDEO3,
+			.amux     = 1,
+		} },
+	},
+	[EM2820_BOARD_VIDEOLOGY_20K14XUSB] = {
+		.name          = "Videology 20K14XUSB USB2.0",
+		.valid        = EM28XX_BOARD_NOT_VALIDATED,
+		.vchannels     = 1,
+		.input         = { {
+			.type     = EM28XX_VMUX_COMPOSITE1,
+			.vmux     = 0,
+			.amux     = 0,
+		} },
+	},
+	[EM2821_BOARD_PROLINK_PLAYTV_USB2] = {
+		.name         = "SIIG AVTuner-PVR/Prolink PlayTV USB 2.0",
+		.valid        = EM28XX_BOARD_NOT_VALIDATED,
+		.vchannels    = 3,
+		.is_em2800    = 0,
+		.tuner_type   = TUNER_LG_PAL_NEW_TAPC,	/* unknown? */
+		.tda9887_conf = TDA9887_PRESENT,	/* unknown? */
+		.decoder      = EM28XX_SAA7113,
+		.input          = { {
+			.type     = EM28XX_VMUX_TELEVISION,
+			.vmux     = SAA7115_COMPOSITE2,
+			.amux     = 1,
+		}, {
+			.type     = EM28XX_VMUX_COMPOSITE1,
+			.vmux     = SAA7115_COMPOSITE0,
+			.amux     = 1,
+		}, {
+			.type     = EM28XX_VMUX_SVIDEO,
+			.vmux     = SAA7115_SVIDEO3,
+			.amux     = 1,
+		} },
+	},
+	[EM2821_BOARD_SUPERCOMP_USB_2] = {
+		.name         = "Supercomp USB 2.0 TV",
+		.valid        = EM28XX_BOARD_NOT_VALIDATED,
+		.vchannels    = 3,
+		.is_em2800    = 0,
+		.tuner_type   = TUNER_PHILIPS_FM1236_MK3,
+		.tda9887_conf = TDA9887_PRESENT |
+				TDA9887_PORT1_ACTIVE |
+				TDA9887_PORT2_ACTIVE,
+		.decoder      = EM28XX_SAA7113,
+		.input          = { {
+			.type     = EM28XX_VMUX_TELEVISION,
+			.vmux     = SAA7115_COMPOSITE2,
+			.amux     = 1,
+		}, {
+			.type     = EM28XX_VMUX_COMPOSITE1,
+			.vmux     = SAA7115_COMPOSITE0,
+			.amux     = 0,
+		}, {
+			.type     = EM28XX_VMUX_SVIDEO,
+			.vmux     = SAA7115_SVIDEO3,
+			.amux     = 1,
+		} },
+	},
+	[EM2821_BOARD_USBGEAR_VD204] = {
+		.name          = "Usbgear VD204v9",
+		.valid        = EM28XX_BOARD_NOT_VALIDATED,
+		.vchannels     = 2,
+		.decoder       = EM28XX_SAA7113,
+		.input          = { {
+			.type  = EM28XX_VMUX_COMPOSITE1,
+			.vmux  = SAA7115_COMPOSITE0,
+			.amux  = 1,
+		}, {
+			.type  = EM28XX_VMUX_SVIDEO,
+			.vmux  = SAA7115_SVIDEO3,
+			.amux  = 1,
+		} },
+	},
+	[EM2860_BOARD_NETGMBH_CAM] = {
+		/* Beijing Huaqi Information Digital Technology Co., Ltd */
+		.name          = "NetGMBH Cam",
+		.valid       = EM28XX_BOARD_NOT_VALIDATED,
+		.vchannels     = 1,
+		.input         = { {
+			.type     = EM28XX_VMUX_COMPOSITE1,
+			.vmux     = 0,
+			.amux     = 0,
+		} },
+	},
+	[EM2860_BOARD_TYPHOON_DVD_MAKER] = {
+		.name          = "Typhoon DVD Maker",
+		.valid        = EM28XX_BOARD_NOT_VALIDATED,
+		.vchannels     = 2,
+		.decoder       = EM28XX_SAA7113,
+		.input          = { {
+			.type  = EM28XX_VMUX_COMPOSITE1,
+			.vmux  = SAA7115_COMPOSITE0,
+			.amux  = 1,
+		}, {
+			.type  = EM28XX_VMUX_SVIDEO,
+			.vmux  = SAA7115_SVIDEO3,
+			.amux  = 1,
+		} },
+	},
+	[EM2860_BOARD_GADMEI_UTV330] = {
+		.name         = "Gadmei UTV330",
+		.valid        = EM28XX_BOARD_NOT_VALIDATED,
+		.vchannels    = 3,
+		.tuner_type   = TUNER_TNF_5335MF,
+		.tda9887_conf = TDA9887_PRESENT,
+		.decoder      = EM28XX_SAA7113,
+		.input          = { {
+			.type     = EM28XX_VMUX_TELEVISION,
+			.vmux     = SAA7115_COMPOSITE2,
+			.amux     = 0,
+		}, {
+			.type     = EM28XX_VMUX_COMPOSITE1,
+			.vmux     = SAA7115_COMPOSITE0,
+			.amux     = 1,
+		}, {
+			.type     = EM28XX_VMUX_SVIDEO,
+			.vmux     = SAA7115_SVIDEO3,
+			.amux     = 1,
+		} },
+	},
+	[EM2860_BOARD_TERRATEC_HYBRID_XS] = {
+		.name         = "Terratec Cinergy A Hybrid XS",
+		.valid        = EM28XX_BOARD_NOT_VALIDATED,
+		.vchannels    = 3,
+		.tuner_type   = TUNER_XC2028,
+		.decoder      = EM28XX_TVP5150,
+		.input          = { {
+			.type     = EM28XX_VMUX_TELEVISION,
+			.vmux     = TVP5150_COMPOSITE0,
+			.amux     = 0,
+		}, {
+			.type     = EM28XX_VMUX_COMPOSITE1,
+			.vmux     = TVP5150_COMPOSITE1,
+			.amux     = 1,
+		}, {
+			.type     = EM28XX_VMUX_SVIDEO,
+			.vmux     = TVP5150_SVIDEO,
+			.amux     = 1,
+		} },
+	},
+	[EM2861_BOARD_KWORLD_PVRTV_300U] = {
+		.name	      = "KWorld PVRTV 300U",
+		.valid        = EM28XX_BOARD_NOT_VALIDATED,
+		.vchannels    = 3,
+		.tuner_type   = TUNER_XC2028,
+		.decoder      = EM28XX_TVP5150,
+		.input          = { {
+			.type     = EM28XX_VMUX_TELEVISION,
+			.vmux     = TVP5150_COMPOSITE0,
+			.amux     = 0,
+		}, {
+			.type     = EM28XX_VMUX_COMPOSITE1,
+			.vmux     = TVP5150_COMPOSITE1,
+			.amux     = 1,
+		}, {
+			.type     = EM28XX_VMUX_SVIDEO,
+			.vmux     = TVP5150_SVIDEO,
+			.amux     = 1,
+		} },
+	},
+	[EM2861_BOARD_YAKUMO_MOVIE_MIXER] = {
+		.name          = "Yakumo MovieMixer",
+		.valid       = EM28XX_BOARD_NOT_VALIDATED,
+		.vchannels     = 1,
+		.decoder       = EM28XX_TVP5150,
+		.input         = { {
+			.type     = EM28XX_VMUX_TELEVISION,
+			.vmux     = TVP5150_COMPOSITE0,
+			.amux     = 0,
+		}, {
+			.type     = EM28XX_VMUX_COMPOSITE1,
+			.vmux     = TVP5150_COMPOSITE1,
+			.amux     = 1,
+		}, {
+			.type     = EM28XX_VMUX_SVIDEO,
+			.vmux     = TVP5150_SVIDEO,
+			.amux     = 1,
+		} },
+	},
+	[EM2861_BOARD_PLEXTOR_PX_TV100U] = {
+		.name         = "Plextor ConvertX PX-TV100U",
+		.valid        = EM28XX_BOARD_NOT_VALIDATED,
+		.vchannels    = 3,
+		.tuner_type   = TUNER_TNF_5335MF,
+		.tda9887_conf = TDA9887_PRESENT,
+		.decoder      = EM28XX_TVP5150,
+		.input          = { {
+			.type     = EM28XX_VMUX_TELEVISION,
+			.vmux     = TVP5150_COMPOSITE0,
+			.amux     = 1,
+		}, {
+			.type     = EM28XX_VMUX_COMPOSITE1,
+			.vmux     = TVP5150_COMPOSITE1,
+			.amux     = 1,
+		}, {
+			.type     = EM28XX_VMUX_SVIDEO,
+			.vmux     = TVP5150_SVIDEO,
+			.amux     = 1,
+		} },
+	},
+	[EM2870_BOARD_TERRATEC_XS] = {
+		.name         = "Terratec Cinergy T XS",
+		.valid        = EM28XX_BOARD_NOT_VALIDATED,
+		.tuner_type   = TUNER_XC2028,
+	},
+	[EM2870_BOARD_TERRATEC_XS_MT2060] = {
+		.name         = "Terratec Cinergy T XS (MT2060)",
+		.valid        = EM28XX_BOARD_NOT_VALIDATED,
+		.tuner_type   = TUNER_ABSENT, /* MT2060 */
+	},
+	[EM2870_BOARD_KWORLD_350U] = {
+		.name         = "Kworld 350 U DVB-T",
+		.valid        = EM28XX_BOARD_NOT_VALIDATED,
+		.tuner_type   = TUNER_XC2028,
+	},
+	[EM2870_BOARD_KWORLD_355U] = {
+		.name         = "Kworld 355 U DVB-T",
+		.valid        = EM28XX_BOARD_NOT_VALIDATED,
+	},
+	[EM2870_BOARD_PINNACLE_PCTV_DVB] = {
+		.name         = "Pinnacle PCTV DVB-T",
+		.valid        = EM28XX_BOARD_NOT_VALIDATED,
+		.tuner_type   = TUNER_ABSENT, /* MT2060 */
+	},
+	[EM2870_BOARD_COMPRO_VIDEOMATE] = {
+		.name         = "Compro, VideoMate U3",
+		.valid        = EM28XX_BOARD_NOT_VALIDATED,
+		.tuner_type   = TUNER_ABSENT, /* MT2060 */
+	},
+	[EM2880_BOARD_TERRATEC_HYBRID_XS_FR] = {
+		.name         = "Terratec Hybrid XS Secam",
+		.valid        = EM28XX_BOARD_NOT_VALIDATED,
+		.vchannels    = 3,
+		.has_msp34xx  = 1,
+		.tuner_type   = TUNER_XC2028,
+		.decoder      = EM28XX_TVP5150,
+		.input          = { {
+			.type     = EM28XX_VMUX_TELEVISION,
+			.vmux     = TVP5150_COMPOSITE0,
+			.amux     = 0,
+		}, {
+			.type     = EM28XX_VMUX_COMPOSITE1,
+			.vmux     = TVP5150_COMPOSITE1,
+			.amux     = 1,
+		}, {
+			.type     = EM28XX_VMUX_SVIDEO,
+			.vmux     = TVP5150_SVIDEO,
+			.amux     = 1,
+		} },
+	},
 	[EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900] = {
 		.name         = "Hauppauge WinTV HVR 900",
 		.vchannels    = 3,
@@ -194,7 +606,7 @@ struct em28xx_board em28xx_boards[] = {
 			.amux     = 1,
 		} },
 	},
-	[EM2880_BOARD_HAUPPAUGE_WINTV_HVR_950] = {
+	[EM2883_BOARD_HAUPPAUGE_WINTV_HVR_950] = {
 		.name           = "Hauppauge WinTV HVR 950",
 		.vchannels      = 3,
 		.tda9887_conf   = TDA9887_PRESENT,
@@ -240,12 +652,36 @@ struct em28xx_board em28xx_boards[] = {
 			.amux     = 1,
 		} },
 	},
+	[EM2880_BOARD_AMD_ATI_TV_WONDER_HD_600] = {
+		.name           = "AMD ATI TV Wonder HD 600",
+		.vchannels      = 3,
+		.tda9887_conf   = TDA9887_PRESENT,
+		.tuner_type     = TUNER_XC2028,
+		.mts_firmware   = 1,
+		.has_12mhz_i2s  = 1,
+		.has_dvb        = 1,
+		.decoder        = EM28XX_TVP5150,
+		.input          = { {
+			.type     = EM28XX_VMUX_TELEVISION,
+			.vmux     = TVP5150_COMPOSITE0,
+			.amux     = 0,
+		}, {
+			.type     = EM28XX_VMUX_COMPOSITE1,
+			.vmux     = TVP5150_COMPOSITE1,
+			.amux     = 1,
+		}, {
+			.type     = EM28XX_VMUX_SVIDEO,
+			.vmux     = TVP5150_SVIDEO,
+			.amux     = 1,
+		} },
+	},
 	[EM2880_BOARD_TERRATEC_HYBRID_XS] = {
 		.name         = "Terratec Hybrid XS",
 		.vchannels    = 3,
 		.tda9887_conf = TDA9887_PRESENT,
 		.tuner_type   = TUNER_XC2028,
 		.decoder      = EM28XX_TVP5150,
+		.has_dvb        = 1,
 		.input          = { {
 			.type     = EM28XX_VMUX_TELEVISION,
 			.vmux     = TVP5150_COMPOSITE0,
@@ -328,6 +764,21 @@ struct em28xx_board em28xx_boards[] = {
 			.amux     = 1,
 		} },
 	},
+	[EM2800_BOARD_GRABBEEX_USB2800] = {
+		.name         = "eMPIA Technology, Inc. GrabBeeX+ Video Encoder",
+		.is_em2800    = 1,
+		.vchannels    = 2,
+		.decoder      = EM28XX_SAA7113,
+		.input          = { {
+			.type     = EM28XX_VMUX_COMPOSITE1,
+			.vmux     = SAA7115_COMPOSITE0,
+			.amux     = 1,
+		}, {
+			.type     = EM28XX_VMUX_SVIDEO,
+			.vmux     = SAA7115_SVIDEO3,
+			.amux     = 1,
+		} },
+	},
 	[EM2800_BOARD_LEADTEK_WINFAST_USBII] = {
 		.name         = "Leadtek Winfast USB II",
 		.is_em2800    = 1,
@@ -439,13 +890,233 @@ struct em28xx_board em28xx_boards[] = {
 			.amux     = 0,
 		} },
 	},
+	[EM2880_BOARD_MSI_DIGIVOX_AD] = {
+		.name         = "MSI DigiVox A/D",
+		.valid        = EM28XX_BOARD_NOT_VALIDATED,
+		.vchannels    = 3,
+		.tuner_type   = TUNER_XC2028,
+		.decoder      = EM28XX_TVP5150,
+		.input          = { {
+			.type     = EM28XX_VMUX_TELEVISION,
+			.vmux     = TVP5150_COMPOSITE0,
+			.amux     = 0,
+		}, {
+			.type     = EM28XX_VMUX_COMPOSITE1,
+			.vmux     = TVP5150_COMPOSITE1,
+			.amux     = 1,
+		}, {
+			.type     = EM28XX_VMUX_SVIDEO,
+			.vmux     = TVP5150_SVIDEO,
+			.amux     = 1,
+		} },
+	},
+	[EM2880_BOARD_MSI_DIGIVOX_AD_II] = {
+		.name         = "MSI DigiVox A/D II",
+		.valid        = EM28XX_BOARD_NOT_VALIDATED,
+		.vchannels    = 3,
+		.tuner_type   = TUNER_XC2028,
+		.decoder      = EM28XX_TVP5150,
+		.input          = { {
+			.type     = EM28XX_VMUX_TELEVISION,
+			.vmux     = TVP5150_COMPOSITE0,
+			.amux     = 0,
+		}, {
+			.type     = EM28XX_VMUX_COMPOSITE1,
+			.vmux     = TVP5150_COMPOSITE1,
+			.amux     = 1,
+		}, {
+			.type     = EM28XX_VMUX_SVIDEO,
+			.vmux     = TVP5150_SVIDEO,
+			.amux     = 1,
+		} },
+	},
+	[EM2880_BOARD_KWORLD_DVB_305U] = {
+		.name	      = "KWorld DVB-T 305U",
+		.valid        = EM28XX_BOARD_NOT_VALIDATED,
+		.vchannels    = 3,
+		.tuner_type   = TUNER_XC2028,
+		.decoder      = EM28XX_TVP5150,
+		.input          = { {
+			.type     = EM28XX_VMUX_TELEVISION,
+			.vmux     = TVP5150_COMPOSITE0,
+			.amux     = 0,
+		}, {
+			.type     = EM28XX_VMUX_COMPOSITE1,
+			.vmux     = TVP5150_COMPOSITE1,
+			.amux     = 1,
+		}, {
+			.type     = EM28XX_VMUX_SVIDEO,
+			.vmux     = TVP5150_SVIDEO,
+			.amux     = 1,
+		} },
+	},
+	[EM2880_BOARD_KWORLD_DVB_310U] = {
+		.name	      = "KWorld DVB-T 310U",
+		.valid        = EM28XX_BOARD_NOT_VALIDATED,
+		.vchannels    = 3,
+		.tuner_type   = TUNER_XC2028,
+		.decoder      = EM28XX_TVP5150,
+		.input          = { {
+			.type     = EM28XX_VMUX_TELEVISION,
+			.vmux     = TVP5150_COMPOSITE0,
+			.amux     = 0,
+		}, {
+			.type     = EM28XX_VMUX_COMPOSITE1,
+			.vmux     = TVP5150_COMPOSITE1,
+			.amux     = 1,
+		}, {
+			.type     = EM28XX_VMUX_SVIDEO,
+			.vmux     = TVP5150_SVIDEO,
+			.amux     = 1,
+		} },
+	},
+	[EM2881_BOARD_DNT_DA2_HYBRID] = {
+		.name         = "DNT DA2 Hybrid",
+		.valid        = EM28XX_BOARD_NOT_VALIDATED,
+		.vchannels    = 3,
+		.tuner_type   = TUNER_XC2028,
+		.decoder      = EM28XX_TVP5150,
+		.input          = { {
+			.type     = EM28XX_VMUX_TELEVISION,
+			.vmux     = TVP5150_COMPOSITE0,
+			.amux     = 0,
+		}, {
+			.type     = EM28XX_VMUX_COMPOSITE1,
+			.vmux     = TVP5150_COMPOSITE1,
+			.amux     = 1,
+		}, {
+			.type     = EM28XX_VMUX_SVIDEO,
+			.vmux     = TVP5150_SVIDEO,
+			.amux     = 1,
+		} },
+	},
+	[EM2881_BOARD_PINNACLE_HYBRID_PRO] = {
+		.name         = "Pinnacle Hybrid Pro",
+		.valid        = EM28XX_BOARD_NOT_VALIDATED,
+		.vchannels    = 3,
+		.tuner_type   = TUNER_XC2028,
+		.decoder      = EM28XX_TVP5150,
+		.input          = { {
+			.type     = EM28XX_VMUX_TELEVISION,
+			.vmux     = TVP5150_COMPOSITE0,
+			.amux     = 0,
+		}, {
+			.type     = EM28XX_VMUX_COMPOSITE1,
+			.vmux     = TVP5150_COMPOSITE1,
+			.amux     = 1,
+		}, {
+			.type     = EM28XX_VMUX_SVIDEO,
+			.vmux     = TVP5150_SVIDEO,
+			.amux     = 1,
+		} },
+	},
+	[EM2882_BOARD_PINNACLE_HYBRID_PRO] = {
+		.name         = "Pinnacle Hybrid Pro (2)",
+		.valid        = EM28XX_BOARD_NOT_VALIDATED,
+		.vchannels    = 3,
+		.tuner_type   = TUNER_XC2028,
+		.mts_firmware = 1,
+		.decoder      = EM28XX_TVP5150,
+		.input          = { {
+			.type     = EM28XX_VMUX_TELEVISION,
+			.vmux     = TVP5150_COMPOSITE0,
+			.amux     = 0,
+		}, {
+			.type     = EM28XX_VMUX_COMPOSITE1,
+			.vmux     = TVP5150_COMPOSITE1,
+			.amux     = 1,
+		}, {
+			.type     = EM28XX_VMUX_SVIDEO,
+			.vmux     = TVP5150_SVIDEO,
+			.amux     = 1,
+		} },
+	},
+	[EM2882_BOARD_KWORLD_VS_DVBT] = {
+		.name         = "Kworld VS-DVB-T 323UR",
+		.valid        = EM28XX_BOARD_NOT_VALIDATED,
+		.vchannels    = 3,
+		.tuner_type   = TUNER_XC2028,
+		.decoder      = EM28XX_TVP5150,
+		.input          = { {
+			.type     = EM28XX_VMUX_TELEVISION,
+			.vmux     = TVP5150_COMPOSITE0,
+			.amux     = 0,
+		}, {
+			.type     = EM28XX_VMUX_COMPOSITE1,
+			.vmux     = TVP5150_COMPOSITE1,
+			.amux     = 1,
+		}, {
+			.type     = EM28XX_VMUX_SVIDEO,
+			.vmux     = TVP5150_SVIDEO,
+			.amux     = 1,
+		} },
+	},
+	[EM2882_BOARD_TERRATEC_HYBRID_XS] = {
+		.name         = "Terratec Hybrid XS (em2882)",
+		.valid        = EM28XX_BOARD_NOT_VALIDATED,
+		.vchannels    = 3,
+		.tuner_type   = TUNER_XC2028,
+		.decoder      = EM28XX_TVP5150,
+		.input          = { {
+			.type     = EM28XX_VMUX_TELEVISION,
+			.vmux     = TVP5150_COMPOSITE0,
+			.amux     = 0,
+		}, {
+			.type     = EM28XX_VMUX_COMPOSITE1,
+			.vmux     = TVP5150_COMPOSITE1,
+			.amux     = 1,
+		}, {
+			.type     = EM28XX_VMUX_SVIDEO,
+			.vmux     = TVP5150_SVIDEO,
+			.amux     = 1,
+		} },
+	},
+	[EM2883_BOARD_KWORLD_HYBRID_A316] = {
+		.name         = "Kworld PlusTV HD Hybrid 330",
+		.valid        = EM28XX_BOARD_NOT_VALIDATED,
+		.vchannels    = 3,
+		.is_em2800    = 0,
+		.tuner_type   = TUNER_XC2028,
+		.decoder      = EM28XX_TVP5150,
+		.input          = { {
+			.type     = EM28XX_VMUX_TELEVISION,
+			.vmux     = TVP5150_COMPOSITE0,
+			.amux     = 0,
+		}, {
+			.type     = EM28XX_VMUX_COMPOSITE1,
+			.vmux     = TVP5150_COMPOSITE1,
+			.amux     = 1,
+		}, {
+			.type     = EM28XX_VMUX_SVIDEO,
+			.vmux     = TVP5150_SVIDEO,
+			.amux     = 1,
+		} },
+	},
+	[EM2820_BOARD_COMPRO_VIDEOMATE_FORYOU] = {
+		.name         = "Compro VideoMate ForYou/Stereo",
+		.vchannels    = 2,
+		.tuner_type   = TUNER_LG_PAL_NEW_TAPC,
+		.tda9887_conf = TDA9887_PRESENT,
+		.decoder      = EM28XX_TVP5150,
+		.input          = { {
+			.type     = EM28XX_VMUX_TELEVISION,
+			.vmux     = TVP5150_COMPOSITE0,
+			.amux     = EM28XX_AMUX_LINE_IN,
+		}, {
+			.type     = EM28XX_VMUX_SVIDEO,
+			.vmux     = TVP5150_SVIDEO,
+			.amux     = EM28XX_AMUX_LINE_IN,
+		} },
+	},
 };
 const unsigned int em28xx_bcount = ARRAY_SIZE(em28xx_boards);
 
 /* table of devices that work with this driver */
 struct usb_device_id em28xx_id_table [] = {
 	{ USB_DEVICE(0xeb1a, 0x2750),
-			.driver_info = EM2820_BOARD_UNKNOWN },
+			.driver_info = EM2750_BOARD_UNKNOWN },
+	{ USB_DEVICE(0xeb1a, 0x2751),
+			.driver_info = EM2750_BOARD_UNKNOWN },
 	{ USB_DEVICE(0xeb1a, 0x2800),
 			.driver_info = EM2800_BOARD_UNKNOWN },
 	{ USB_DEVICE(0xeb1a, 0x2820),
@@ -462,36 +1133,78 @@ struct usb_device_id em28xx_id_table [] = {
 			.driver_info = EM2820_BOARD_UNKNOWN },
 	{ USB_DEVICE(0xeb1a, 0x2883),
 			.driver_info = EM2820_BOARD_UNKNOWN },
+	{ USB_DEVICE(0xeb1a, 0xe300),
+			.driver_info = EM2861_BOARD_KWORLD_PVRTV_300U },
+	{ USB_DEVICE(0xeb1a, 0xe305),
+			.driver_info = EM2880_BOARD_KWORLD_DVB_305U },
+	{ USB_DEVICE(0xeb1a, 0xe310),
+			.driver_info = EM2880_BOARD_MSI_DIGIVOX_AD },
+	{ USB_DEVICE(0xeb1a, 0xa316),
+			.driver_info = EM2883_BOARD_KWORLD_HYBRID_A316 },
+	{ USB_DEVICE(0xeb1a, 0xe320),
+			.driver_info = EM2880_BOARD_MSI_DIGIVOX_AD_II },
+	{ USB_DEVICE(0xeb1a, 0xe323),
+			.driver_info = EM2882_BOARD_KWORLD_VS_DVBT },
+	{ USB_DEVICE(0xeb1a, 0xe350),
+			.driver_info = EM2870_BOARD_KWORLD_350U },
+	{ USB_DEVICE(0xeb1a, 0xe355),
+			.driver_info = EM2870_BOARD_KWORLD_355U },
+	{ USB_DEVICE(0xeb1a, 0x2801),
+			.driver_info = EM2800_BOARD_GRABBEEX_USB2800 },
+	{ USB_DEVICE(0xeb1a, 0xe357),
+			.driver_info = EM2870_BOARD_KWORLD_355U },
 	{ USB_DEVICE(0x0ccd, 0x0036),
 			.driver_info = EM2820_BOARD_TERRATEC_CINERGY_250 },
-	{ USB_DEVICE(0x2304, 0x0208),
-			.driver_info = EM2820_BOARD_PINNACLE_USB_2 },
+	{ USB_DEVICE(0x0ccd, 0x004c),
+			.driver_info = EM2880_BOARD_TERRATEC_HYBRID_XS_FR },
+	{ USB_DEVICE(0x0ccd, 0x004f),
+			.driver_info = EM2860_BOARD_TERRATEC_HYBRID_XS },
+	{ USB_DEVICE(0x0ccd, 0x005e),
+			.driver_info = EM2882_BOARD_TERRATEC_HYBRID_XS },
+	{ USB_DEVICE(0x0ccd, 0x0042),
+			.driver_info = EM2880_BOARD_TERRATEC_HYBRID_XS },
+	{ USB_DEVICE(0x0ccd, 0x0043),
+			.driver_info = EM2870_BOARD_TERRATEC_XS },
+	{ USB_DEVICE(0x0ccd, 0x0047),
+			.driver_info = EM2880_BOARD_TERRATEC_PRODIGY_XS },
+	{ USB_DEVICE(0x185b, 0x2870),
+			.driver_info = EM2870_BOARD_COMPRO_VIDEOMATE },
+	{ USB_DEVICE(0x185b, 0x2041),
+			.driver_info = EM2820_BOARD_COMPRO_VIDEOMATE_FORYOU },
 	{ USB_DEVICE(0x2040, 0x4200),
 			.driver_info = EM2820_BOARD_HAUPPAUGE_WINTV_USB_2 },
 	{ USB_DEVICE(0x2040, 0x4201),
 			.driver_info = EM2820_BOARD_HAUPPAUGE_WINTV_USB_2 },
-	{ USB_DEVICE(0x2304, 0x0207),
-			.driver_info = EM2820_BOARD_PINNACLE_DVC_90 },
-	{ USB_DEVICE(0x2304, 0x021a),
-			.driver_info = EM2820_BOARD_PINNACLE_DVC_90 },
-	{ USB_DEVICE(0x2304, 0x0227),
-			.driver_info = EM2880_BOARD_PINNACLE_PCTV_HD_PRO },
 	{ USB_DEVICE(0x2040, 0x6500),
 			.driver_info = EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900 },
 	{ USB_DEVICE(0x2040, 0x6502),
 			.driver_info = EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900_R2 },
 	{ USB_DEVICE(0x2040, 0x6513), /* HCW HVR-980 */
-			.driver_info = EM2880_BOARD_HAUPPAUGE_WINTV_HVR_950 },
+			.driver_info = EM2883_BOARD_HAUPPAUGE_WINTV_HVR_950 },
 	{ USB_DEVICE(0x2040, 0x6517), /* HP  HVR-950 */
-			.driver_info = EM2880_BOARD_HAUPPAUGE_WINTV_HVR_950 },
+			.driver_info = EM2883_BOARD_HAUPPAUGE_WINTV_HVR_950 },
 	{ USB_DEVICE(0x2040, 0x651b), /* RP  HVR-950 */
-			.driver_info = EM2880_BOARD_HAUPPAUGE_WINTV_HVR_950 },
+			.driver_info = EM2883_BOARD_HAUPPAUGE_WINTV_HVR_950 },
 	{ USB_DEVICE(0x2040, 0x651f), /* HCW HVR-850 */
-			.driver_info = EM2880_BOARD_HAUPPAUGE_WINTV_HVR_950 },
-	{ USB_DEVICE(0x0ccd, 0x0042),
-			.driver_info = EM2880_BOARD_TERRATEC_HYBRID_XS },
-	{ USB_DEVICE(0x0ccd, 0x0047),
-			.driver_info = EM2880_BOARD_TERRATEC_PRODIGY_XS },
+			.driver_info = EM2883_BOARD_HAUPPAUGE_WINTV_HVR_950 },
+	{ USB_DEVICE(0x0438, 0xb002),
+			.driver_info = EM2880_BOARD_AMD_ATI_TV_WONDER_HD_600 },
+	{ USB_DEVICE(0x2001, 0xf112),
+			.driver_info = EM2820_BOARD_DLINK_USB_TV },
+	{ USB_DEVICE(0x2304, 0x0207),
+			.driver_info = EM2820_BOARD_PINNACLE_DVC_90 },
+	{ USB_DEVICE(0x2304, 0x0208),
+			.driver_info = EM2820_BOARD_PINNACLE_USB_2 },
+	{ USB_DEVICE(0x2304, 0x021a),
+			.driver_info = EM2820_BOARD_PINNACLE_DVC_90 },
+	{ USB_DEVICE(0x2304, 0x0226),
+			.driver_info = EM2882_BOARD_PINNACLE_HYBRID_PRO },
+	{ USB_DEVICE(0x2304, 0x0227),
+			.driver_info = EM2880_BOARD_PINNACLE_PCTV_HD_PRO },
+	{ USB_DEVICE(0x0413, 0x6023),
+			.driver_info = EM2800_BOARD_LEADTEK_WINFAST_USBII },
+	{ USB_DEVICE(0x093b, 0xa005),
+			.driver_info = EM2861_BOARD_PLEXTOR_PX_TV100U },
 	{ },
 };
 MODULE_DEVICE_TABLE(usb, em28xx_id_table);
@@ -500,6 +1213,18 @@ MODULE_DEVICE_TABLE(usb, em28xx_id_table);
  *  Reset sequences for analog/digital modes
  */
 
+/* Reset for the most [analog] boards */
+static struct em28xx_reg_seq default_analog[] = {
+	{EM28XX_R08_GPIO,	0x6d,   ~EM_GPIO_4,	10},
+	{	-1,		-1,	-1,		-1},
+};
+
+/* Reset for the most [digital] boards */
+static struct em28xx_reg_seq default_digital[] = {
+	{EM28XX_R08_GPIO,	0x6e,	~EM_GPIO_4,	10},
+	{	-1,		-1,	-1,		-1},
+};
+
 /* Board Hauppauge WinTV HVR 900 analog */
 static struct em28xx_reg_seq hauppauge_wintv_hvr_900_analog[] = {
 	{EM28XX_R08_GPIO,	0x2d,	~EM_GPIO_4,	10},
@@ -515,14 +1240,42 @@ static struct em28xx_reg_seq hauppauge_wintv_hvr_900_digital[] = {
 	{ -1,			-1,	-1,		-1},
 };
 
-/* Board Hauppauge WinTV HVR 900 tuner_callback */
-static struct em28xx_reg_seq hauppauge_wintv_hvr_900_tuner_callback[] = {
+/* Boards - EM2880 MSI DIGIVOX AD and EM2880_BOARD_MSI_DIGIVOX_AD_II */
+static struct em28xx_reg_seq em2880_msi_digivox_ad_analog[] = {
+	{EM28XX_R08_GPIO,       0x69,   ~EM_GPIO_4,	 10},
+	{	-1,		-1,	-1,		 -1},
+};
+
+/* Boards - EM2880 MSI DIGIVOX AD and EM2880_BOARD_MSI_DIGIVOX_AD_II */
+static struct em28xx_reg_seq em2880_msi_digivox_ad_digital[] = {
+	{EM28XX_R08_GPIO,	0x6a,	~EM_GPIO_4,	10},
+	{	-1,		-1,	-1,		-1},
+};
+
+/* Board  - EM2870 Kworld 355u
+   Analog - No input analog */
+static struct em28xx_reg_seq em2870_kworld_355u_digital[] = {
+	{EM2880_R04_GPO,	0x01,	0xff,		10},
+	{  -1,			-1,	-1,		-1},
+};
+
+/* Callback for the most boards */
+static struct em28xx_reg_seq default_callback[] = {
 	{EM28XX_R08_GPIO,	EM_GPIO_4,	EM_GPIO_4,	10},
 	{EM28XX_R08_GPIO,	0,		EM_GPIO_4,	10},
 	{EM28XX_R08_GPIO,	EM_GPIO_4,	EM_GPIO_4,	10},
 	{  -1,			-1,		-1,		-1},
 };
 
+/* Callback for EM2882 TERRATEC HYBRID XS */
+static struct em28xx_reg_seq em2882_terratec_hybrid_xs_digital[] = {
+	{EM28XX_R08_GPIO,       0x2e,   0xff,		   6},
+	{EM28XX_R08_GPIO,       0x3e,   ~EM_GPIO_4,	   6},
+	{EM2880_R04_GPO,        0x04,   0xff,		  10},
+	{EM2880_R04_GPO,        0x0c,   0xff,		  10},
+	{  -1,			-1,	-1,		  -1},
+};
+
 /*
  * EEPROM hash table for devices with generic USB IDs
  */
@@ -569,6 +1322,7 @@ static void em28xx_set_model(struct em28xx *dev)
 	dev->max_range_640_480 = em28xx_boards[dev->model].max_range_640_480;
 	dev->has_dvb = em28xx_boards[dev->model].has_dvb;
 	dev->has_snapshot_button = em28xx_boards[dev->model].has_snapshot_button;
+	dev->valid = em28xx_boards[dev->model].valid;
 }
 
 /* Since em28xx_pre_card_setup() requires a proper dev->model,
@@ -604,19 +1358,171 @@ void em28xx_pre_card_setup(struct em28xx *dev)
 	case EM2880_BOARD_TERRATEC_PRODIGY_XS:
 	case EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900:
 	case EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900_R2:
-	case EM2880_BOARD_TERRATEC_HYBRID_XS:
-	case EM2880_BOARD_HAUPPAUGE_WINTV_HVR_950:
+	case EM2860_BOARD_TERRATEC_HYBRID_XS:
+	case EM2883_BOARD_HAUPPAUGE_WINTV_HVR_950:
 	case EM2880_BOARD_PINNACLE_PCTV_HD_PRO:
+	case EM2882_BOARD_PINNACLE_HYBRID_PRO:
+	case EM2883_BOARD_KWORLD_HYBRID_A316:
+	case EM2880_BOARD_AMD_ATI_TV_WONDER_HD_600:
+		em28xx_write_regs(dev, EM28XX_R0F_XCLK,    "\x27", 1);
+		em28xx_write_regs(dev, EM28XX_R06_I2C_CLK, "\x40", 1);
+		msleep(50);
+
+		/* Sets GPO/GPIO sequences for this device */
+		dev->analog_gpio      = hauppauge_wintv_hvr_900_analog;
+		dev->digital_gpio     = hauppauge_wintv_hvr_900_digital;
+		dev->tun_analog_gpio  = default_callback;
+		dev->tun_digital_gpio = default_callback;
+		break;
+
+	case EM2882_BOARD_TERRATEC_HYBRID_XS:
 		em28xx_write_regs(dev, EM28XX_R0F_XCLK,    "\x27", 1);
 		em28xx_write_regs(dev, EM28XX_R06_I2C_CLK, "\x40", 1);
 		msleep(50);
 
+		/* should be added ir_codes here */
+
 		/* Sets GPO/GPIO sequences for this device */
 		dev->analog_gpio      = hauppauge_wintv_hvr_900_analog;
 		dev->digital_gpio     = hauppauge_wintv_hvr_900_digital;
-		dev->tun_analog_gpio  = hauppauge_wintv_hvr_900_tuner_callback;
-		dev->tun_digital_gpio = hauppauge_wintv_hvr_900_tuner_callback;
+		dev->tun_analog_gpio  = default_callback;
+		dev->tun_digital_gpio = em2882_terratec_hybrid_xs_digital;
+		break;
+
+	case EM2880_BOARD_TERRATEC_HYBRID_XS_FR:
+	case EM2880_BOARD_TERRATEC_HYBRID_XS:
+	case EM2870_BOARD_TERRATEC_XS:
+	case EM2881_BOARD_PINNACLE_HYBRID_PRO:
+	case EM2880_BOARD_KWORLD_DVB_310U:
+	case EM2870_BOARD_KWORLD_350U:
+	case EM2881_BOARD_DNT_DA2_HYBRID:
+		em28xx_write_regs(dev, EM28XX_R0F_XCLK,    "\x27", 1);
+		em28xx_write_regs(dev, EM28XX_R06_I2C_CLK, "\x40", 1);
+		msleep(50);
+
+		/* NOTE: EM2881_DNT_DA2_HYBRID spend 140 msleep for digital
+			 and analog commands. If this commands doesn't work,
+			 add this timer. */
 
+		/* Sets GPO/GPIO sequences for this device */
+		dev->analog_gpio      = default_analog;
+		dev->digital_gpio     = default_digital;
+		dev->tun_analog_gpio  = default_callback;
+		dev->tun_digital_gpio = default_callback;
+		break;
+
+	case EM2880_BOARD_MSI_DIGIVOX_AD:
+	case EM2880_BOARD_MSI_DIGIVOX_AD_II:
+		em28xx_write_regs(dev, EM28XX_R0F_XCLK,    "\x27", 1);
+		em28xx_write_regs(dev, EM28XX_R06_I2C_CLK, "\x40", 1);
+		msleep(50);
+
+		/* Sets GPO/GPIO sequences for this device */
+		dev->analog_gpio      = em2880_msi_digivox_ad_analog;
+		dev->digital_gpio     = em2880_msi_digivox_ad_digital;
+		dev->tun_analog_gpio  = default_callback;
+		dev->tun_digital_gpio = default_callback;
+		break;
+
+	case EM2750_BOARD_UNKNOWN:
+	case EM2750_BOARD_DLCW_130:
+		em28xx_write_regs(dev, EM28XX_R0F_XCLK, "\x0a", 1);
+		break;
+
+	case EM2861_BOARD_PLEXTOR_PX_TV100U:
+		em28xx_write_regs(dev, EM28XX_R0F_XCLK, "\x27", 1);
+		em28xx_write_regs(dev, EM28XX_R06_I2C_CLK, "\x40", 1);
+		/* FIXME guess */
+		/* Turn on analog audio output */
+		em28xx_write_regs_req(dev, 0x00, 0x08, "\xfd", 1);
+		break;
+
+	case EM2861_BOARD_KWORLD_PVRTV_300U:
+	case EM2880_BOARD_KWORLD_DVB_305U:
+		em28xx_write_regs(dev, EM28XX_R0F_XCLK, "\x27", 1);
+		em28xx_write_regs(dev, EM28XX_R06_I2C_CLK, "\x4c", 1);
+		msleep(10);
+		em28xx_write_regs(dev, 0x08, "\x6d", 1);
+		msleep(10);
+		em28xx_write_regs(dev, 0x08, "\x7d", 1);
+		msleep(10);
+		break;
+
+	case EM2870_BOARD_KWORLD_355U:
+		em28xx_write_regs(dev, EM28XX_R0F_XCLK, "\x27", 1);
+		em28xx_write_regs(dev, EM28XX_R06_I2C_CLK, "\x40", 1);
+		msleep(50);
+
+		/* Sets GPO/GPIO sequences for this device */
+		dev->digital_gpio     = em2870_kworld_355u_digital;
+		break;
+
+	case EM2870_BOARD_COMPRO_VIDEOMATE:
+		em28xx_write_regs(dev, EM28XX_R0F_XCLK, "\x27", 1);
+		em28xx_write_regs(dev, EM28XX_R06_I2C_CLK, "\x40", 1);
+		/* TODO: someone can do some cleanup here...
+			 not everything's needed */
+		em28xx_write_regs(dev, 0x04, "\x00", 1);
+		msleep(10);
+		em28xx_write_regs(dev, 0x04, "\x01", 1);
+		msleep(10);
+		em28xx_write_regs(dev, 0x08, "\xfd", 1);
+		mdelay(70);
+		em28xx_write_regs(dev, 0x08, "\xfc", 1);
+		mdelay(70);
+		em28xx_write_regs(dev, 0x08, "\xdc", 1);
+		mdelay(70);
+		em28xx_write_regs(dev, 0x08, "\xfc", 1);
+		mdelay(70);
+		break;
+
+	case EM2870_BOARD_TERRATEC_XS_MT2060:
+		em28xx_write_regs(dev, EM28XX_R0F_XCLK, "\x27", 1);
+		em28xx_write_regs(dev, EM28XX_R06_I2C_CLK, "\x40", 1);
+		/* this device needs some gpio writes to get the DVB-T
+		   demod work */
+		em28xx_write_regs(dev, 0x08, "\xfe", 1);
+		mdelay(70);
+		em28xx_write_regs(dev, 0x08, "\xde", 1);
+		mdelay(70);
+		dev->em28xx_write_regs(dev, 0x08, "\xfe", 1);
+		mdelay(70);
+		break;
+
+	case EM2870_BOARD_PINNACLE_PCTV_DVB:
+		em28xx_write_regs(dev, EM28XX_R06_I2C_CLK, "\x40", 1);
+		/* this device needs some gpio writes to get the
+		   DVB-T demod work */
+		em28xx_write_regs(dev, 0x08, "\xfe", 1);
+		mdelay(70);
+		em28xx_write_regs(dev, 0x08, "\xde", 1);
+		mdelay(70);
+		em28xx_write_regs(dev, 0x08, "\xfe", 1);
+		mdelay(70);
+		/* switch em2880 rc protocol */
+		em28xx_write_regs(dev, EM28XX_R0F_XCLK, "\x22", 1);
+		/* should be added ir_codes here */
+		break;
+
+	case EM2820_BOARD_GADMEI_UTV310:
+		em28xx_write_regs(dev, EM28XX_R0F_XCLK, "\x27", 1);
+		em28xx_write_regs(dev, EM28XX_R06_I2C_CLK, "\x40", 1);
+		/* Turn on analog audio output */
+		em28xx_write_regs_req(dev, 0x00, 0x08, "\xfd", 1);
+		break;
+
+	case EM2860_BOARD_GADMEI_UTV330:
+		/* Turn on IR */
+		em28xx_write_regs(dev, EM28XX_R0F_XCLK, "\x07", 1);
+		em28xx_write_regs(dev, EM28XX_R06_I2C_CLK, "\x40", 1);
+		/* should be added ir_codes here */
+		break;
+
+	case EM2820_BOARD_MSI_VOX_USB_2:
+		em28xx_write_regs(dev, EM28XX_R0F_XCLK, "\x27", 1);
+		em28xx_write_regs(dev, EM28XX_R06_I2C_CLK, "\x40", 1);
+		/* enables audio for that device */
+		em28xx_write_regs_req(dev, 0x00, 0x08, "\xfd", 1);
 		break;
 	}
 
@@ -639,12 +1545,16 @@ static void em28xx_setup_xc3028(struct em28xx *dev, struct xc2028_ctrl *ctl)
 	case EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900:
 		ctl->demod = XC3028_FE_ZARLINK456;
 		break;
+	case EM2880_BOARD_TERRATEC_HYBRID_XS:
+		ctl->demod = XC3028_FE_ZARLINK456;
+		break;
 	case EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900_R2:
 		/* djh - Not sure which demod we need here */
 		ctl->demod = XC3028_FE_DEFAULT;
 		break;
-	case EM2880_BOARD_HAUPPAUGE_WINTV_HVR_950:
+	case EM2883_BOARD_HAUPPAUGE_WINTV_HVR_950:
 	case EM2880_BOARD_PINNACLE_PCTV_HD_PRO:
+	case EM2880_BOARD_AMD_ATI_TV_WONDER_HD_600:
 		/* FIXME: Better to specify the needed IF */
 		ctl->demod = XC3028_FE_DEFAULT;
 		break;
@@ -809,6 +1719,8 @@ void em28xx_set_ir(struct em28xx *dev, struct IR_i2c *ir)
 		break;
 	case (EM2800_BOARD_KWORLD_USB2800):
 		break;
+	case (EM2800_BOARD_GRABBEEX_USB2800):
+		break;
 	}
 }
 
@@ -823,7 +1735,7 @@ void em28xx_card_setup(struct em28xx *dev)
 	case EM2820_BOARD_HAUPPAUGE_WINTV_USB_2:
 	case EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900:
 	case EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900_R2:
-	case EM2880_BOARD_HAUPPAUGE_WINTV_HVR_950:
+	case EM2883_BOARD_HAUPPAUGE_WINTV_HVR_950:
 	{
 		struct tveeprom tv;
 #ifdef CONFIG_MODULES
@@ -836,7 +1748,7 @@ void em28xx_card_setup(struct em28xx *dev)
 
 		dev->tuner_type = tv.tuner_type;
 
-		if (tv.audio_processor == AUDIO_CHIP_MSP34XX) {
+		if (tv.audio_processor == V4L2_IDENT_MSPX4XX) {
 			dev->i2s_speed = 2048000;
 			dev->has_msp34xx = 1;
 		}
@@ -854,11 +1766,21 @@ void em28xx_card_setup(struct em28xx *dev)
 	case EM2800_BOARD_UNKNOWN:
 		if (!em28xx_hint_board(dev))
 			em28xx_set_model(dev);
+		break;
 	}
 
 	if (dev->has_snapshot_button)
 		em28xx_register_snapshot_button(dev);
 
+	if (dev->valid == EM28XX_BOARD_NOT_VALIDATED) {
+		em28xx_errdev("\n\n");
+		em28xx_errdev("The support for this board weren't "
+			      "valid yet.\n");
+		em28xx_errdev("Please send a report of having this working\n");
+		em28xx_errdev("not to V4L mailing list (and/or to other "
+				"addresses)\n\n");
+	}
+
 	/* Allow override tuner type by a module parameter */
 	if (tuner >= 0)
 		dev->tuner_type = tuner;
diff --git a/drivers/media/video/em28xx/em28xx-dvb.c b/drivers/media/video/em28xx/em28xx-dvb.c
index cc61cfb23a4a..4b992bc0083c 100644
--- a/drivers/media/video/em28xx/em28xx-dvb.c
+++ b/drivers/media/video/em28xx/em28xx-dvb.c
@@ -6,6 +6,7 @@
  (c) 2008 Devin Heitmueller <devin.heitmueller@gmail.com>
 	- Fixes for the driver to properly work with HVR-950
 	- Fixes for the driver to properly work with Pinnacle PCTV HD Pro Stick
+	- Fixes for the driver to properly work with AMD ATI TV Wonder HD 600
 
  (c) 2008 Aidan Thornton <makosoft@googlemail.com>
 
@@ -409,8 +410,9 @@ static int dvb_init(struct em28xx *dev)
 	em28xx_set_mode(dev, EM28XX_DIGITAL_MODE);
 	/* init frontend */
 	switch (dev->model) {
-	case EM2880_BOARD_HAUPPAUGE_WINTV_HVR_950:
+	case EM2883_BOARD_HAUPPAUGE_WINTV_HVR_950:
 	case EM2880_BOARD_PINNACLE_PCTV_HD_PRO:
+	case EM2880_BOARD_AMD_ATI_TV_WONDER_HD_600:
 		dvb->frontend = dvb_attach(lgdt330x_attach,
 					   &em2880_lgdt3303_dev,
 					   &dev->i2c_adap);
@@ -441,6 +443,15 @@ static int dvb_init(struct em28xx *dev)
 		}
 		break;
 #endif
+	case EM2880_BOARD_TERRATEC_HYBRID_XS:
+		dvb->frontend = dvb_attach(zl10353_attach,
+						&em28xx_zl10353_with_xc3028,
+						&dev->i2c_adap);
+		if (attach_xc3028(0x61, dev) < 0) {
+			 result = -EINVAL;
+			goto out_free;
+		}
+		break;
 	default:
 		printk(KERN_ERR "%s/2: The frontend of your DVB/ATSC card"
 				" isn't supported yet\n",
diff --git a/drivers/media/video/em28xx/em28xx-video.c b/drivers/media/video/em28xx/em28xx-video.c
index 2d9f14d2a00b..49ab0629702e 100644
--- a/drivers/media/video/em28xx/em28xx-video.c
+++ b/drivers/media/video/em28xx/em28xx-video.c
@@ -38,6 +38,7 @@
 
 #include "em28xx.h"
 #include <media/v4l2-common.h>
+#include <media/v4l2-ioctl.h>
 #include <media/msp3400.h>
 #include <media/tuner.h>
 
@@ -1763,20 +1764,7 @@ static const struct file_operations em28xx_v4l_fops = {
 	.compat_ioctl  = v4l_compat_ioctl32,
 };
 
-static const struct file_operations radio_fops = {
-	.owner         = THIS_MODULE,
-	.open          = em28xx_v4l2_open,
-	.release       = em28xx_v4l2_close,
-	.ioctl	       = video_ioctl2,
-	.compat_ioctl  = v4l_compat_ioctl32,
-	.llseek        = no_llseek,
-};
-
-static const struct video_device em28xx_video_template = {
-	.fops                       = &em28xx_v4l_fops,
-	.release                    = video_device_release,
-
-	.minor                      = -1,
+static const struct v4l2_ioctl_ops video_ioctl_ops = {
 	.vidioc_querycap            = vidioc_querycap,
 	.vidioc_enum_fmt_vid_cap    = vidioc_enum_fmt_vid_cap,
 	.vidioc_g_fmt_vid_cap       = vidioc_g_fmt_vid_cap,
@@ -1814,16 +1802,29 @@ static const struct video_device em28xx_video_template = {
 #ifdef CONFIG_VIDEO_V4L1_COMPAT
 	.vidiocgmbuf                = vidiocgmbuf,
 #endif
+};
+
+static const struct video_device em28xx_video_template = {
+	.fops                       = &em28xx_v4l_fops,
+	.release                    = video_device_release,
+	.ioctl_ops 		    = &video_ioctl_ops,
+
+	.minor                      = -1,
 
 	.tvnorms                    = V4L2_STD_ALL,
 	.current_norm               = V4L2_STD_PAL,
 };
 
-static struct video_device em28xx_radio_template = {
-	.name                 = "em28xx-radio",
-	.type                 = VID_TYPE_TUNER,
-	.fops                 = &radio_fops,
-	.minor                = -1,
+static const struct file_operations radio_fops = {
+	.owner         = THIS_MODULE,
+	.open          = em28xx_v4l2_open,
+	.release       = em28xx_v4l2_close,
+	.ioctl	       = video_ioctl2,
+	.compat_ioctl  = v4l_compat_ioctl32,
+	.llseek        = no_llseek,
+};
+
+static const struct v4l2_ioctl_ops radio_ioctl_ops = {
 	.vidioc_querycap      = radio_querycap,
 	.vidioc_g_tuner       = radio_g_tuner,
 	.vidioc_enum_input    = radio_enum_input,
@@ -1842,6 +1843,13 @@ static struct video_device em28xx_radio_template = {
 #endif
 };
 
+static struct video_device em28xx_radio_template = {
+	.name                 = "em28xx-radio",
+	.fops                 = &radio_fops,
+	.ioctl_ops 	      = &radio_ioctl_ops,
+	.minor                = -1,
+};
+
 /******************************** usb interface ******************************/
 
 
@@ -1882,7 +1890,6 @@ EXPORT_SYMBOL(em28xx_unregister_extension);
 
 static struct video_device *em28xx_vdev_init(struct em28xx *dev,
 					     const struct video_device *template,
-					     const int type,
 					     const char *type_name)
 {
 	struct video_device *vfd;
@@ -1892,9 +1899,8 @@ static struct video_device *em28xx_vdev_init(struct em28xx *dev,
 		return NULL;
 	*vfd = *template;
 	vfd->minor   = -1;
-	vfd->dev = &dev->udev->dev;
+	vfd->parent = &dev->udev->dev;
 	vfd->release = video_device_release;
-	vfd->type = type;
 	vfd->debug = video_debug;
 
 	snprintf(vfd->name, sizeof(vfd->name), "%s %s",
@@ -1972,14 +1978,11 @@ static int em28xx_init_dev(struct em28xx **devhandle, struct usb_device *udev,
 	list_add_tail(&dev->devlist, &em28xx_devlist);
 
 	/* allocate and fill video video_device struct */
-	dev->vdev = em28xx_vdev_init(dev, &em28xx_video_template,
-					  VID_TYPE_CAPTURE, "video");
+	dev->vdev = em28xx_vdev_init(dev, &em28xx_video_template, "video");
 	if (NULL == dev->vdev) {
 		em28xx_errdev("cannot allocate video_device.\n");
 		goto fail_unreg;
 	}
-	if (dev->tuner_type != TUNER_ABSENT)
-		dev->vdev->type |= VID_TYPE_TUNER;
 
 	/* register v4l2 video video_device */
 	retval = video_register_device(dev->vdev, VFL_TYPE_GRABBER,
@@ -1991,8 +1994,7 @@ static int em28xx_init_dev(struct em28xx **devhandle, struct usb_device *udev,
 	}
 
 	/* Allocate and fill vbi video_device struct */
-	dev->vbi_dev = em28xx_vdev_init(dev, &em28xx_video_template,
-					  VFL_TYPE_VBI, "vbi");
+	dev->vbi_dev = em28xx_vdev_init(dev, &em28xx_video_template, "vbi");
 	/* register v4l2 vbi video_device */
 	if (video_register_device(dev->vbi_dev, VFL_TYPE_VBI,
 					vbi_nr[dev->devno]) < 0) {
@@ -2002,8 +2004,7 @@ static int em28xx_init_dev(struct em28xx **devhandle, struct usb_device *udev,
 	}
 
 	if (em28xx_boards[dev->model].radio.type == EM28XX_RADIO) {
-		dev->radio_dev = em28xx_vdev_init(dev, &em28xx_radio_template,
-					VFL_TYPE_RADIO, "radio");
+		dev->radio_dev = em28xx_vdev_init(dev, &em28xx_radio_template, "radio");
 		if (NULL == dev->radio_dev) {
 			em28xx_errdev("cannot allocate video_device.\n");
 			goto fail_unreg;
diff --git a/drivers/media/video/em28xx/em28xx.h b/drivers/media/video/em28xx/em28xx.h
index 89842c5d64a1..9a3310748685 100644
--- a/drivers/media/video/em28xx/em28xx.h
+++ b/drivers/media/video/em28xx/em28xx.h
@@ -54,15 +54,58 @@
 #define EM2880_BOARD_TERRATEC_PRODIGY_XS	13
 #define EM2820_BOARD_PROLINK_PLAYTV_USB2	14
 #define EM2800_BOARD_VGEAR_POCKETTV             15
-#define EM2880_BOARD_HAUPPAUGE_WINTV_HVR_950	16
+#define EM2883_BOARD_HAUPPAUGE_WINTV_HVR_950	16
 #define EM2880_BOARD_PINNACLE_PCTV_HD_PRO	17
 #define EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900_R2	18
 #define EM2860_BOARD_POINTNIX_INTRAORAL_CAMERA  19
+#define EM2880_BOARD_AMD_ATI_TV_WONDER_HD_600   20
+#define EM2800_BOARD_GRABBEEX_USB2800           21
+#define EM2750_BOARD_UNKNOWN			  22
+#define EM2750_BOARD_DLCW_130			  23
+#define EM2820_BOARD_DLINK_USB_TV		  24
+#define EM2820_BOARD_GADMEI_UTV310		  25
+#define EM2820_BOARD_HERCULES_SMART_TV_USB2	  26
+#define EM2820_BOARD_PINNACLE_USB_2_FM1216ME	  27
+#define EM2820_BOARD_LEADTEK_WINFAST_USBII_DELUXE 28
+#define EM2820_BOARD_PINNACLE_DVC_100		  29
+#define EM2820_BOARD_VIDEOLOGY_20K14XUSB	  30
+#define EM2821_BOARD_USBGEAR_VD204		  31
+#define EM2821_BOARD_SUPERCOMP_USB_2		  32
+#define EM2821_BOARD_PROLINK_PLAYTV_USB2	  33
+#define EM2860_BOARD_TERRATEC_HYBRID_XS		  34
+#define EM2860_BOARD_TYPHOON_DVD_MAKER		  35
+#define EM2860_BOARD_NETGMBH_CAM		  36
+#define EM2860_BOARD_GADMEI_UTV330		  37
+#define EM2861_BOARD_YAKUMO_MOVIE_MIXER		  38
+#define EM2861_BOARD_KWORLD_PVRTV_300U		  39
+#define EM2861_BOARD_PLEXTOR_PX_TV100U		  40
+#define EM2870_BOARD_KWORLD_350U		  41
+#define EM2870_BOARD_KWORLD_355U		  42
+#define EM2870_BOARD_TERRATEC_XS		  43
+#define EM2870_BOARD_TERRATEC_XS_MT2060		  44
+#define EM2870_BOARD_PINNACLE_PCTV_DVB		  45
+#define EM2870_BOARD_COMPRO_VIDEOMATE		  46
+#define EM2880_BOARD_KWORLD_DVB_305U		  47
+#define EM2880_BOARD_KWORLD_DVB_310U		  48
+#define EM2880_BOARD_MSI_DIGIVOX_AD		  49
+#define EM2880_BOARD_MSI_DIGIVOX_AD_II		  50
+#define EM2880_BOARD_TERRATEC_HYBRID_XS_FR	  51
+#define EM2881_BOARD_DNT_DA2_HYBRID		  52
+#define EM2881_BOARD_PINNACLE_HYBRID_PRO	  53
+#define EM2882_BOARD_KWORLD_VS_DVBT		  54
+#define EM2882_BOARD_TERRATEC_HYBRID_XS		  55
+#define EM2882_BOARD_PINNACLE_HYBRID_PRO	  56
+#define EM2883_BOARD_KWORLD_HYBRID_A316		  57
+#define EM2820_BOARD_COMPRO_VIDEOMATE_FORYOU	  58
 
 /* Limits minimum and default number of buffers */
 #define EM28XX_MIN_BUF 4
 #define EM28XX_DEF_BUF 8
 
+/* Params for validated field */
+#define EM28XX_BOARD_NOT_VALIDATED 1
+#define EM28XX_BOARD_VALIDATED	   0
+
 /* maximum number of em28xx boards */
 #define EM28XX_MAXBOARDS 4 /*FIXME: should be bigger */
 
@@ -251,6 +294,7 @@ struct em28xx_board {
 	unsigned int max_range_640_480:1;
 	unsigned int has_dvb:1;
 	unsigned int has_snapshot_button:1;
+	unsigned int valid:1;
 
 	enum em28xx_decoder decoder;
 
@@ -331,6 +375,7 @@ struct em28xx {
 	unsigned int max_range_640_480:1;
 	unsigned int has_dvb:1;
 	unsigned int has_snapshot_button:1;
+	unsigned int valid:1;		/* report for validated boards */
 
 	/* Some older em28xx chips needs a waiting time after writing */
 	unsigned int wait_after_write;
@@ -360,7 +405,7 @@ struct em28xx {
 	v4l2_std_id norm;	/* selected tv norm */
 	int ctl_freq;		/* selected frequency */
 	unsigned int ctl_input;	/* selected input */
-	unsigned int ctl_ainput;	/* slected audio input */
+	unsigned int ctl_ainput;/* selected audio input */
 	int mute;
 	int volume;
 	/* frame properties */
diff --git a/drivers/media/video/et61x251/et61x251_core.c b/drivers/media/video/et61x251/et61x251_core.c
index 15d037ae25c5..2d170d101c21 100644
--- a/drivers/media/video/et61x251/et61x251_core.c
+++ b/drivers/media/video/et61x251/et61x251_core.c
@@ -34,6 +34,7 @@
 #include <linux/mm.h>
 #include <linux/vmalloc.h>
 #include <linux/page-flags.h>
+#include <media/v4l2-ioctl.h>
 #include <asm/byteorder.h>
 #include <asm/page.h>
 #include <asm/uaccess.h>
@@ -985,7 +986,7 @@ static DEVICE_ATTR(i2c_val, S_IRUGO | S_IWUSR,
 
 static int et61x251_create_sysfs(struct et61x251_device* cam)
 {
-	struct device *classdev = &(cam->v4ldev->class_dev);
+	struct device *classdev = &(cam->v4ldev->dev);
 	int err = 0;
 
 	if ((err = device_create_file(classdev, &dev_attr_reg)))
@@ -2584,8 +2585,6 @@ et61x251_usb_probe(struct usb_interface* intf, const struct usb_device_id* id)
 	}
 
 	strcpy(cam->v4ldev->name, "ET61X[12]51 PC Camera");
-	cam->v4ldev->owner = THIS_MODULE;
-	cam->v4ldev->type = VID_TYPE_CAPTURE | VID_TYPE_SCALES;
 	cam->v4ldev->fops = &et61x251_fops;
 	cam->v4ldev->minor = video_nr[dev_nr];
 	cam->v4ldev->release = video_device_release;
diff --git a/drivers/media/video/gspca/conex.c b/drivers/media/video/gspca/conex.c
index 013d593b0c67..cd3a3f5829b2 100644
--- a/drivers/media/video/gspca/conex.c
+++ b/drivers/media/video/gspca/conex.c
@@ -25,9 +25,6 @@
 #define CONEX_CAM 1		/* special JPEG header */
 #include "jpeg.h"
 
-#define DRIVER_VERSION_NUMBER	KERNEL_VERSION(2, 1, 7)
-static const char version[] = "2.1.7";
-
 MODULE_AUTHOR("Michel Xhaard <mxhaard@users.sourceforge.net>");
 MODULE_DESCRIPTION("GSPCA USB Conexant Camera Driver");
 MODULE_LICENSE("GPL");
@@ -126,7 +123,7 @@ static void reg_r(struct gspca_dev *gspca_dev,
 {
 	struct usb_device *dev = gspca_dev->dev;
 
-#ifdef CONFIG_VIDEO_ADV_DEBUG
+#ifdef GSPCA_DEBUG
 	if (len > sizeof gspca_dev->usb_buf) {
 		err("reg_r: buffer overflow");
 		return;
@@ -166,7 +163,7 @@ static void reg_w(struct gspca_dev *gspca_dev,
 {
 	struct usb_device *dev = gspca_dev->dev;
 
-#ifdef CONFIG_VIDEO_ADV_DEBUG
+#ifdef GSPCA_DEBUG
 	if (len > sizeof gspca_dev->usb_buf) {
 		err("reg_w: buffer overflow");
 		return;
@@ -818,7 +815,6 @@ static int sd_config(struct gspca_dev *gspca_dev,
 	struct cam *cam;
 
 	cam = &gspca_dev->cam;
-	cam->dev_name = (char *) id->driver_info;
 	cam->epaddr = 0x01;
 	cam->cam_mode = vga_mode;
 	cam->nmodes = sizeof vga_mode / sizeof vga_mode[0];
@@ -1011,9 +1007,8 @@ static struct sd_desc sd_desc = {
 };
 
 /* -- module initialisation -- */
-#define DVNM(name) .driver_info = (kernel_ulong_t) name
 static __devinitdata struct usb_device_id device_table[] = {
-	{USB_DEVICE(0x0572, 0x0041), DVNM("Creative Notebook cx11646")},
+	{USB_DEVICE(0x0572, 0x0041)},
 	{}
 };
 MODULE_DEVICE_TABLE(usb, device_table);
@@ -1038,7 +1033,7 @@ static int __init sd_mod_init(void)
 {
 	if (usb_register(&sd_driver) < 0)
 		return -1;
-	PDEBUG(D_PROBE, "v%s registered", version);
+	PDEBUG(D_PROBE, "registered");
 	return 0;
 }
 static void __exit sd_mod_exit(void)
diff --git a/drivers/media/video/gspca/etoms.c b/drivers/media/video/gspca/etoms.c
index 8ab4ea7201a9..1dbe92d01e6a 100644
--- a/drivers/media/video/gspca/etoms.c
+++ b/drivers/media/video/gspca/etoms.c
@@ -22,9 +22,6 @@
 
 #include "gspca.h"
 
-#define DRIVER_VERSION_NUMBER	KERNEL_VERSION(2, 1, 7)
-static const char version[] = "2.1.7";
-
 MODULE_AUTHOR("Michel Xhaard <mxhaard@users.sourceforge.net>");
 MODULE_DESCRIPTION("Etoms USB Camera Driver");
 MODULE_LICENSE("GPL");
@@ -236,7 +233,7 @@ static void reg_r(struct gspca_dev *gspca_dev,
 {
 	struct usb_device *dev = gspca_dev->dev;
 
-#ifdef CONFIG_VIDEO_ADV_DEBUG
+#ifdef GSPCA_DEBUG
 	if (len > sizeof gspca_dev->usb_buf) {
 		err("reg_r: buffer overflow");
 		return;
@@ -274,7 +271,7 @@ static void reg_w(struct gspca_dev *gspca_dev,
 {
 	struct usb_device *dev = gspca_dev->dev;
 
-#ifdef CONFIG_VIDEO_ADV_DEBUG
+#ifdef GSPCA_DEBUG
 	if (len > sizeof gspca_dev->usb_buf) {
 		err("reg_w: buffer overflow");
 		return;
@@ -464,6 +461,52 @@ static void Et_init2(struct gspca_dev *gspca_dev)
 	reg_w_val(gspca_dev, 0x80, 0x20);	/* 0x20; */
 }
 
+static void setbrightness(struct gspca_dev *gspca_dev)
+{
+	struct sd *sd = (struct sd *) gspca_dev;
+	int i;
+	__u8 brightness = sd->brightness;
+
+	for (i = 0; i < 4; i++)
+		reg_w_val(gspca_dev, ET_O_RED + i, brightness);
+}
+
+static void getbrightness(struct gspca_dev *gspca_dev)
+{
+	struct sd *sd = (struct sd *) gspca_dev;
+	int i;
+	int brightness = 0;
+
+	for (i = 0; i < 4; i++) {
+		reg_r(gspca_dev, ET_O_RED + i, 1);
+		brightness += gspca_dev->usb_buf[0];
+	}
+	sd->brightness = brightness >> 3;
+}
+
+static void setcontrast(struct gspca_dev *gspca_dev)
+{
+	struct sd *sd = (struct sd *) gspca_dev;
+	__u8 RGBG[] = { 0x80, 0x80, 0x80, 0x80, 0x00, 0x00 };
+	__u8 contrast = sd->contrast;
+
+	memset(RGBG, contrast, sizeof(RGBG) - 2);
+	reg_w(gspca_dev, ET_G_RED, RGBG, 6);
+}
+
+static void getcontrast(struct gspca_dev *gspca_dev)
+{
+	struct sd *sd = (struct sd *) gspca_dev;
+	int i;
+	int contrast = 0;
+
+	for (i = 0; i < 4; i++) {
+		reg_r(gspca_dev, ET_G_RED + i, 1);
+		contrast += gspca_dev->usb_buf[0];
+	}
+	sd->contrast = contrast >> 2;
+}
+
 static void setcolors(struct gspca_dev *gspca_dev)
 {
 	struct sd *sd = (struct sd *) gspca_dev;
@@ -495,6 +538,16 @@ static void getcolors(struct gspca_dev *gspca_dev)
 	}
 }
 
+static void setautogain(struct gspca_dev *gspca_dev)
+{
+	struct sd *sd = (struct sd *) gspca_dev;
+
+	if (sd->autogain)
+		sd->ag_cnt = AG_CNT_START;
+	else
+		sd->ag_cnt = -1;
+}
+
 static void Et_init1(struct gspca_dev *gspca_dev)
 {
 	__u8 value;
@@ -602,26 +655,10 @@ static int sd_config(struct gspca_dev *gspca_dev,
 {
 	struct sd *sd = (struct sd *) gspca_dev;
 	struct cam *cam;
-	__u16 vendor;
-	__u16 product;
-
-	vendor = id->idVendor;
-	product = id->idProduct;
-/*	switch (vendor) { */
-/*	case 0x102c:		* Etoms */
-		switch (product) {
-		case 0x6151:
-			sd->sensor = SENSOR_PAS106;	/* Etoms61x151 */
-			break;
-		case 0x6251:
-			sd->sensor = SENSOR_TAS5130CXX;	/* Etoms61x251 */
-			break;
-/*		} */
-/*		break; */
-	}
+
 	cam = &gspca_dev->cam;
-	cam->dev_name = (char *) id->driver_info;
 	cam->epaddr = 1;
+	sd->sensor = id->driver_info;
 	if (sd->sensor == SENSOR_PAS106) {
 		cam->cam_mode = sif_mode;
 		cam->nmodes = sizeof sif_mode / sizeof sif_mode[0];
@@ -633,6 +670,7 @@ static int sd_config(struct gspca_dev *gspca_dev,
 	sd->contrast = CONTRAST_DEF;
 	sd->colors = COLOR_DEF;
 	sd->autogain = AUTOGAIN_DEF;
+	sd->ag_cnt = -1;
 	return 0;
 }
 
@@ -660,6 +698,8 @@ static void sd_start(struct gspca_dev *gspca_dev)
 	else
 		Et_init2(gspca_dev);
 
+	setautogain(gspca_dev);
+
 	reg_w_val(gspca_dev, ET_RESET_ALL, 0x08);
 	et_video(gspca_dev, 1);		/* video on */
 }
@@ -677,52 +717,6 @@ static void sd_close(struct gspca_dev *gspca_dev)
 {
 }
 
-static void setbrightness(struct gspca_dev *gspca_dev)
-{
-	struct sd *sd = (struct sd *) gspca_dev;
-	int i;
-	__u8 brightness = sd->brightness;
-
-	for (i = 0; i < 4; i++)
-		reg_w_val(gspca_dev, ET_O_RED + i, brightness);
-}
-
-static void getbrightness(struct gspca_dev *gspca_dev)
-{
-	struct sd *sd = (struct sd *) gspca_dev;
-	int i;
-	int brightness = 0;
-
-	for (i = 0; i < 4; i++) {
-		reg_r(gspca_dev, ET_O_RED + i, 1);
-		brightness += gspca_dev->usb_buf[0];
-	}
-	sd->brightness = brightness >> 3;
-}
-
-static void setcontrast(struct gspca_dev *gspca_dev)
-{
-	struct sd *sd = (struct sd *) gspca_dev;
-	__u8 RGBG[] = { 0x80, 0x80, 0x80, 0x80, 0x00, 0x00 };
-	__u8 contrast = sd->contrast;
-
-	memset(RGBG, contrast, sizeof(RGBG) - 2);
-	reg_w(gspca_dev, ET_G_RED, RGBG, 6);
-}
-
-static void getcontrast(struct gspca_dev *gspca_dev)
-{
-	struct sd *sd = (struct sd *) gspca_dev;
-	int i;
-	int contrast = 0;
-
-	for (i = 0; i < 4; i++) {
-		reg_r(gspca_dev, ET_G_RED + i, 1);
-		contrast += gspca_dev->usb_buf[0];
-	}
-	sd->contrast = contrast >> 2;
-}
-
 static __u8 Et_getgainG(struct gspca_dev *gspca_dev)
 {
 	struct sd *sd = (struct sd *) gspca_dev;
@@ -752,15 +746,22 @@ static void Et_setgainG(struct gspca_dev *gspca_dev, __u8 gain)
 #define LIMIT(color) \
 	(unsigned char)((color > 0xff)?0xff:((color < 0)?0:color))
 
-static void setautogain(struct gspca_dev *gspca_dev)
+static void do_autogain(struct gspca_dev *gspca_dev)
 {
-	__u8 luma = 0;
+	struct sd *sd = (struct sd *) gspca_dev;
+	__u8 luma;
 	__u8 luma_mean = 128;
 	__u8 luma_delta = 20;
 	__u8 spring = 4;
-	int Gbright = 0;
+	int Gbright;
 	__u8 r, g, b;
 
+	if (sd->ag_cnt < 0)
+		return;
+	if (--sd->ag_cnt >= 0)
+		return;
+	sd->ag_cnt = AG_CNT_START;
+
 	Gbright = Et_getgainG(gspca_dev);
 	reg_r(gspca_dev, ET_LUMA_CENTER, 4);
 	g = (gspca_dev->usb_buf[0] + gspca_dev->usb_buf[3]) >> 1;
@@ -787,7 +788,6 @@ static void sd_pkt_scan(struct gspca_dev *gspca_dev,
 			__u8 *data,			/* isoc packet */
 			int len)			/* iso packet length */
 {
-	struct sd *sd;
 	int seqframe;
 
 	seqframe = data[0] & 0x3f;
@@ -802,13 +802,6 @@ static void sd_pkt_scan(struct gspca_dev *gspca_dev,
 		frame = gspca_frame_add(gspca_dev, LAST_PACKET, frame,
 					data, 0);
 		gspca_frame_add(gspca_dev, FIRST_PACKET, frame, data, len);
-		sd = (struct sd *) gspca_dev;
-		if (sd->ag_cnt >= 0) {
-			if (--sd->ag_cnt < 0) {
-				sd->ag_cnt = AG_CNT_START;
-				setautogain(gspca_dev);
-			}
-		}
 		return;
 	}
 	if (len) {
@@ -881,10 +874,8 @@ static int sd_setautogain(struct gspca_dev *gspca_dev, __s32 val)
 	struct sd *sd = (struct sd *) gspca_dev;
 
 	sd->autogain = val;
-	if (val)
-		sd->ag_cnt = AG_CNT_START;
-	else
-		sd->ag_cnt = -1;
+	if (gspca_dev->streaming)
+		setautogain(gspca_dev);
 	return 0;
 }
 
@@ -908,15 +899,15 @@ static struct sd_desc sd_desc = {
 	.stop0 = sd_stop0,
 	.close = sd_close,
 	.pkt_scan = sd_pkt_scan,
+	.dq_callback = do_autogain,
 };
 
 /* -- module initialisation -- */
-#define DVNM(name) .driver_info = (kernel_ulong_t) name
 static __devinitdata struct usb_device_id device_table[] = {
 #ifndef CONFIG_USB_ET61X251
-	{USB_DEVICE(0x102c, 0x6151), DVNM("Qcam Sangha CIF")},
+	{USB_DEVICE(0x102c, 0x6151), .driver_info = SENSOR_PAS106},
 #endif
-	{USB_DEVICE(0x102c, 0x6251), DVNM("Qcam xxxxxx VGA")},
+	{USB_DEVICE(0x102c, 0x6251), .driver_info = SENSOR_TAS5130CXX},
 	{}
 };
 
@@ -942,7 +933,7 @@ static int __init sd_mod_init(void)
 {
 	if (usb_register(&sd_driver) < 0)
 		return -1;
-	PDEBUG(D_PROBE, "v%s registered", version);
+	PDEBUG(D_PROBE, "registered");
 	return 0;
 }
 
diff --git a/drivers/media/video/gspca/gspca.c b/drivers/media/video/gspca/gspca.c
index 16e367cec760..15d302b28b79 100644
--- a/drivers/media/video/gspca/gspca.c
+++ b/drivers/media/video/gspca/gspca.c
@@ -32,6 +32,7 @@
 #include <asm/page.h>
 #include <linux/uaccess.h>
 #include <linux/jiffies.h>
+#include <media/v4l2-ioctl.h>
 
 #include "gspca.h"
 
@@ -42,12 +43,11 @@ MODULE_AUTHOR("Jean-Francois Moine <http://moinejf.free.fr>");
 MODULE_DESCRIPTION("GSPCA USB Camera Driver");
 MODULE_LICENSE("GPL");
 
-#define DRIVER_VERSION_NUMBER	KERNEL_VERSION(2, 1, 7)
-static const char version[] = "2.1.7";
+#define DRIVER_VERSION_NUMBER	KERNEL_VERSION(2, 2, 0)
 
 static int video_nr = -1;
 
-#ifdef CONFIG_VIDEO_ADV_DEBUG
+#ifdef GSPCA_DEBUG
 int gspca_debug = D_ERR | D_PROBE;
 EXPORT_SYMBOL(gspca_debug);
 
@@ -209,6 +209,8 @@ struct gspca_frame *gspca_frame_add(struct gspca_dev *gspca_dev,
 				   &frame->v4l2_buf.timestamp);
 		frame->v4l2_buf.sequence = ++gspca_dev->sequence;
 	} else if (gspca_dev->last_packet_type == DISCARD_PACKET) {
+		if (packet_type == LAST_PACKET)
+			gspca_dev->last_packet_type = packet_type;
 		return frame;
 	}
 
@@ -399,7 +401,7 @@ static struct usb_host_endpoint *alt_isoc(struct usb_host_interface *alt,
  * This routine may be called many times when the bandwidth is too small
  * (the bandwidth is checked on urb submit).
  */
-struct usb_host_endpoint *get_isoc_ep(struct gspca_dev *gspca_dev)
+static struct usb_host_endpoint *get_isoc_ep(struct gspca_dev *gspca_dev)
 {
 	struct usb_interface *intf;
 	struct usb_host_endpoint *ep;
@@ -675,7 +677,7 @@ static int try_fmt_vid_cap(struct gspca_dev *gspca_dev,
 	w = fmt->fmt.pix.width;
 	h = fmt->fmt.pix.height;
 
-#ifdef CONFIG_VIDEO_ADV_DEBUG
+#ifdef GSPCA_DEBUG
 	if (gspca_debug & D_CONF)
 		PDEBUG_MODE("try fmt cap", fmt->fmt.pix.pixelformat, w, h);
 #endif
@@ -783,7 +785,7 @@ static int dev_open(struct inode *inode, struct file *file)
 	}
 	gspca_dev->users++;
 	file->private_data = gspca_dev;
-#ifdef CONFIG_VIDEO_ADV_DEBUG
+#ifdef GSPCA_DEBUG
 	/* activate the v4l2 debug */
 	if (gspca_debug & D_V4L2)
 		gspca_dev->vdev.debug |= 3;
@@ -832,7 +834,16 @@ static int vidioc_querycap(struct file *file, void  *priv,
 
 	memset(cap, 0, sizeof *cap);
 	strncpy(cap->driver, gspca_dev->sd_desc->name, sizeof cap->driver);
-	strncpy(cap->card, gspca_dev->cam.dev_name, sizeof cap->card);
+/*	strncpy(cap->card, gspca_dev->cam.dev_name, sizeof cap->card); */
+	if (gspca_dev->dev->product != NULL) {
+		strncpy(cap->card, gspca_dev->dev->product,
+			sizeof cap->card);
+	} else {
+		snprintf(cap->card, sizeof cap->card,
+			"USB Camera (%04x:%04x)",
+			le16_to_cpu(gspca_dev->dev->descriptor.idVendor),
+			le16_to_cpu(gspca_dev->dev->descriptor.idProduct));
+	}
 	strncpy(cap->bus_info, gspca_dev->dev->bus->bus_name,
 		sizeof cap->bus_info);
 	cap->version = DRIVER_VERSION_NUMBER;
@@ -893,7 +904,7 @@ static int vidioc_s_ctrl(struct file *file, void *priv,
 		if (ctrl->id != ctrls->qctrl.id)
 			continue;
 		if (ctrl->value < ctrls->qctrl.minimum
-		    && ctrl->value > ctrls->qctrl.maximum)
+		    || ctrl->value > ctrls->qctrl.maximum)
 			return -ERANGE;
 		PDEBUG(D_CONF, "set ctrl [%08x] = %d", ctrl->id, ctrl->value);
 		if (mutex_lock_interruptible(&gspca_dev->usb_lock))
@@ -1069,7 +1080,7 @@ static int vidioc_streamon(struct file *file, void *priv,
 		if (ret < 0)
 			goto out;
 	}
-#ifdef CONFIG_VIDEO_ADV_DEBUG
+#ifdef GSPCA_DEBUG
 	if (gspca_debug & D_STREAM) {
 		PDEBUG_MODE("stream on OK",
 			gspca_dev->pixfmt,
@@ -1649,12 +1660,7 @@ static struct file_operations dev_fops = {
 	.poll	= dev_poll,
 };
 
-static struct video_device gspca_template = {
-	.name = "gspca main driver",
-	.type = VID_TYPE_CAPTURE,
-	.fops = &dev_fops,
-	.release = dev_release,		/* mandatory */
-	.minor = -1,
+static const struct v4l2_ioctl_ops dev_ioctl_ops = {
 	.vidioc_querycap	= vidioc_querycap,
 	.vidioc_dqbuf		= vidioc_dqbuf,
 	.vidioc_qbuf		= vidioc_qbuf,
@@ -1683,6 +1689,14 @@ static struct video_device gspca_template = {
 #endif
 };
 
+static struct video_device gspca_template = {
+	.name = "gspca main driver",
+	.fops = &dev_fops,
+	.ioctl_ops = &dev_ioctl_ops,
+	.release = dev_release,		/* mandatory */
+	.minor = -1,
+};
+
 /*
  * probe and create a new gspca device
  *
@@ -1740,10 +1754,11 @@ int gspca_dev_probe(struct usb_interface *intf,
 
 	/* init video stuff */
 	memcpy(&gspca_dev->vdev, &gspca_template, sizeof gspca_template);
-	gspca_dev->vdev.dev = &dev->dev;
+	gspca_dev->vdev.parent = &dev->dev;
 	memcpy(&gspca_dev->fops, &dev_fops, sizeof gspca_dev->fops);
 	gspca_dev->vdev.fops = &gspca_dev->fops;
 	gspca_dev->fops.owner = module;		/* module protection */
+	gspca_dev->present = 1;
 	ret = video_register_device(&gspca_dev->vdev,
 				  VFL_TYPE_GRABBER,
 				  video_nr);
@@ -1752,7 +1767,6 @@ int gspca_dev_probe(struct usb_interface *intf,
 		goto out;
 	}
 
-	gspca_dev->present = 1;
 	usb_set_intfdata(intf, gspca_dev);
 	PDEBUG(D_PROBE, "probe ok");
 	return 0;
@@ -1885,7 +1899,10 @@ EXPORT_SYMBOL(gspca_auto_gain_n_exposure);
 /* -- module insert / remove -- */
 static int __init gspca_init(void)
 {
-	info("main v%s registered", version);
+	info("main v%d.%d.%d registered",
+		(DRIVER_VERSION_NUMBER >> 16) & 0xff,
+		(DRIVER_VERSION_NUMBER >> 8) & 0xff,
+		DRIVER_VERSION_NUMBER & 0xff);
 	return 0;
 }
 static void __exit gspca_exit(void)
@@ -1896,7 +1913,7 @@ static void __exit gspca_exit(void)
 module_init(gspca_init);
 module_exit(gspca_exit);
 
-#ifdef CONFIG_VIDEO_ADV_DEBUG
+#ifdef GSPCA_DEBUG
 module_param_named(debug, gspca_debug, int, 0644);
 MODULE_PARM_DESC(debug,
 		"Debug (bit) 0x01:error 0x02:probe 0x04:config"
diff --git a/drivers/media/video/gspca/gspca.h b/drivers/media/video/gspca/gspca.h
index 3fd2c4eee204..67e448940eaa 100644
--- a/drivers/media/video/gspca/gspca.h
+++ b/drivers/media/video/gspca/gspca.h
@@ -9,7 +9,10 @@
 #include <media/v4l2-common.h>
 #include <linux/mutex.h>
 
-#ifdef CONFIG_VIDEO_ADV_DEBUG
+/* compilation option */
+#define GSPCA_DEBUG 1
+
+#ifdef GSPCA_DEBUG
 /* GSPCA our debug messages */
 extern int gspca_debug;
 #define PDEBUG(level, fmt, args...) \
diff --git a/drivers/media/video/gspca/mars.c b/drivers/media/video/gspca/mars.c
index 88c2b02f380a..21c4ee56a10a 100644
--- a/drivers/media/video/gspca/mars.c
+++ b/drivers/media/video/gspca/mars.c
@@ -24,9 +24,6 @@
 #include "gspca.h"
 #include "jpeg.h"
 
-#define DRIVER_VERSION_NUMBER	KERNEL_VERSION(2, 1, 7)
-static const char version[] = "2.1.7";
-
 MODULE_AUTHOR("Michel Xhaard <mxhaard@users.sourceforge.net>");
 MODULE_DESCRIPTION("GSPCA/Mars USB Camera Driver");
 MODULE_LICENSE("GPL");
@@ -140,7 +137,6 @@ static int sd_config(struct gspca_dev *gspca_dev,
 	struct cam *cam;
 
 	cam = &gspca_dev->cam;
-	cam->dev_name = (char *) id->driver_info;
 	cam->epaddr = 0x01;
 	cam->cam_mode = vga_mode;
 	cam->nmodes = sizeof vga_mode / sizeof vga_mode[0];
@@ -424,9 +420,8 @@ static const struct sd_desc sd_desc = {
 };
 
 /* -- module initialisation -- */
-#define DVNM(name) .driver_info = (kernel_ulong_t) name
 static const __devinitdata struct usb_device_id device_table[] = {
-	{USB_DEVICE(0x093a, 0x050f), DVNM("Mars-Semi Pc-Camera")},
+	{USB_DEVICE(0x093a, 0x050f)},
 	{}
 };
 MODULE_DEVICE_TABLE(usb, device_table);
@@ -451,7 +446,7 @@ static int __init sd_mod_init(void)
 {
 	if (usb_register(&sd_driver) < 0)
 		return -1;
-	PDEBUG(D_PROBE, "v%s registered", version);
+	PDEBUG(D_PROBE, "registered");
 	return 0;
 }
 static void __exit sd_mod_exit(void)
diff --git a/drivers/media/video/gspca/ov519.c b/drivers/media/video/gspca/ov519.c
index 08d99c3b78e2..b4f00ec0885c 100644
--- a/drivers/media/video/gspca/ov519.c
+++ b/drivers/media/video/gspca/ov519.c
@@ -24,9 +24,6 @@
 
 #include "gspca.h"
 
-#define DRIVER_VERSION_NUMBER	KERNEL_VERSION(2, 1, 7)
-static const char version[] = "2.1.7";
-
 MODULE_AUTHOR("Jean-Francois Moine <http://moinejf.free.fr>");
 MODULE_DESCRIPTION("OV519 USB Camera Driver");
 MODULE_LICENSE("GPL");
@@ -43,14 +40,15 @@ struct sd {
 	struct gspca_dev gspca_dev;		/* !! must be the first item */
 
 	/* Determined by sensor type */
-	short maxwidth;
-	short maxheight;
+	char sif;
 
 	unsigned char primary_i2c_slave;	/* I2C write id of sensor */
 
 	unsigned char brightness;
 	unsigned char contrast;
 	unsigned char colors;
+	__u8 hflip;
+	__u8 vflip;
 
 	char compress;		/* Should the next frame be compressed? */
 	char compress_inited;	/* Are compression params uploaded? */
@@ -80,9 +78,12 @@ static int sd_setcontrast(struct gspca_dev *gspca_dev, __s32 val);
 static int sd_getcontrast(struct gspca_dev *gspca_dev, __s32 *val);
 static int sd_setcolors(struct gspca_dev *gspca_dev, __s32 val);
 static int sd_getcolors(struct gspca_dev *gspca_dev, __s32 *val);
+static int sd_sethflip(struct gspca_dev *gspca_dev, __s32 val);
+static int sd_gethflip(struct gspca_dev *gspca_dev, __s32 *val);
+static int sd_setvflip(struct gspca_dev *gspca_dev, __s32 val);
+static int sd_getvflip(struct gspca_dev *gspca_dev, __s32 *val);
 
 static struct ctrl sd_ctrls[] = {
-#define SD_BRIGHTNESS 0
 	{
 	    {
 		.id      = V4L2_CID_BRIGHTNESS,
@@ -91,12 +92,12 @@ static struct ctrl sd_ctrls[] = {
 		.minimum = 0,
 		.maximum = 255,
 		.step    = 1,
-		.default_value = 127,
+#define BRIGHTNESS_DEF 127
+		.default_value = BRIGHTNESS_DEF,
 	    },
 	    .set = sd_setbrightness,
 	    .get = sd_getbrightness,
 	},
-#define SD_CONTRAST 1
 	{
 	    {
 		.id      = V4L2_CID_CONTRAST,
@@ -105,31 +106,61 @@ static struct ctrl sd_ctrls[] = {
 		.minimum = 0,
 		.maximum = 255,
 		.step    = 1,
-		.default_value = 127,
+#define CONTRAST_DEF 127
+		.default_value = CONTRAST_DEF,
 	    },
 	    .set = sd_setcontrast,
 	    .get = sd_getcontrast,
 	},
-#define SD_COLOR 2
 	{
 	    {
 		.id      = V4L2_CID_SATURATION,
 		.type    = V4L2_CTRL_TYPE_INTEGER,
-		.name    = "Saturation",
+		.name    = "Color",
 		.minimum = 0,
 		.maximum = 255,
 		.step    = 1,
-		.default_value = 127,
+#define COLOR_DEF 127
+		.default_value = COLOR_DEF,
 	    },
 	    .set = sd_setcolors,
 	    .get = sd_getcolors,
 	},
+/* next controls work with ov7670 only */
+	{
+	    {
+		.id      = V4L2_CID_HFLIP,
+		.type    = V4L2_CTRL_TYPE_BOOLEAN,
+		.name    = "Mirror",
+		.minimum = 0,
+		.maximum = 1,
+		.step    = 1,
+#define HFLIP_DEF 0
+		.default_value = HFLIP_DEF,
+	    },
+	    .set = sd_sethflip,
+	    .get = sd_gethflip,
+	},
+	{
+	    {
+		.id      = V4L2_CID_VFLIP,
+		.type    = V4L2_CTRL_TYPE_BOOLEAN,
+		.name    = "Vflip",
+		.minimum = 0,
+		.maximum = 1,
+		.step    = 1,
+#define VFLIP_DEF 0
+		.default_value = VFLIP_DEF,
+	    },
+	    .set = sd_setvflip,
+	    .get = sd_getvflip,
+	},
 };
 
 static struct v4l2_pix_format vga_mode[] = {
 	{320, 240, V4L2_PIX_FMT_JPEG, V4L2_FIELD_NONE,
 		.bytesperline = 320,
-		.sizeimage = 320 * 240 * 3 / 8 + 589,
+		.sizeimage = 320 * 240 * 3 / 8 + 590,
 		.colorspace = V4L2_COLORSPACE_JPEG,
 		.priv = 1},
 	{640, 480, V4L2_PIX_FMT_JPEG, V4L2_FIELD_NONE,
@@ -141,12 +172,12 @@ static struct v4l2_pix_format vga_mode[] = {
 static struct v4l2_pix_format sif_mode[] = {
 	{176, 144, V4L2_PIX_FMT_JPEG, V4L2_FIELD_NONE,
 		.bytesperline = 176,
-		.sizeimage = 176 * 144 * 3 / 8 + 589,
+		.sizeimage = 176 * 144 * 3 / 8 + 590,
 		.colorspace = V4L2_COLORSPACE_JPEG,
 		.priv = 1},
 	{352, 288, V4L2_PIX_FMT_JPEG, V4L2_FIELD_NONE,
 		.bytesperline = 352,
-		.sizeimage = 352 * 288 * 3 / 8 + 589,
+		.sizeimage = 352 * 288 * 3 / 8 + 590,
 		.colorspace = V4L2_COLORSPACE_JPEG,
 		.priv = 0},
 };
@@ -228,6 +259,7 @@ static struct v4l2_pix_format sif_mode[] = {
 #define OV7670_REG_VSTART      0x19    /* Vert start high bits */
 #define OV7670_REG_VSTOP       0x1a    /* Vert stop high bits */
 #define OV7670_REG_MVFP        0x1e    /* Mirror / vflip */
+#define   OV7670_MVFP_VFLIP	 0x10    /* vertical flip */
 #define   OV7670_MVFP_MIRROR     0x20    /* Mirror image */
 #define OV7670_REG_AEW         0x24    /* AGC upper limit */
 #define OV7670_REG_AEB         0x25    /* AGC lower limit */
@@ -261,16 +293,6 @@ static struct v4l2_pix_format sif_mode[] = {
 #define OV7670_REG_HAECC7      0xaa    /* Hist AEC/AGC control 7 */
 #define OV7670_REG_BD60MAX     0xab    /* 60hz banding step limit */
 
-struct ovsensor_window {
-	short x;
-	short y;
-	short width;
-	short height;
-/*	int format; */
-	short quarter;		/* Scale width and height down 2x */
-	short clockdiv;		/* Clock divisor setting */
-};
-
 static unsigned char ov7670_abs_to_sm(unsigned char v)
 {
 	if (v > 127)
@@ -502,19 +524,6 @@ static int init_ov_sensor(struct sd *sd)
 	return 0;
 }
 
-/* Switch on standard JPEG compression. Returns 0 for success. */
-static int ov519_init_compression(struct sd *sd)
-{
-	if (!sd->compress_inited) {
-		if (reg_w_mask(sd, OV519_SYS_EN_CLK1, 1 << 2, 1 << 2) < 0) {
-			PDEBUG(D_ERR, "Error switching to compressed mode");
-			return -EIO;
-		}
-		sd->compress_inited = 1;
-	}
-	return 0;
-}
-
 /* Set the read and write slave IDs. The "slave" argument is the write slave,
  * and the read slave will be set to (slave + 1).
  * This should not be called from outside the i2c I/O functions.
@@ -684,21 +693,17 @@ static int ov8xx0_configure(struct sd *sd)
 		return -1;
 	}
 	if ((rc & 3) == 1) {
-		PDEBUG(D_PROBE, "Sensor is an OV8610");
 		sd->sensor = SEN_OV8610;
 	} else {
 		PDEBUG(D_ERR, "Unknown image sensor version: %d", rc & 3);
 		return -1;
 	}
 	PDEBUG(D_PROBE, "Writing 8610 registers");
-	if (write_i2c_regvals(sd,
-			norm_8610,
-			sizeof norm_8610 / sizeof norm_8610[0]))
+	if (write_i2c_regvals(sd, norm_8610, ARRAY_SIZE(norm_8610)))
 		return -1;
 
 	/* Set sensor-specific vars */
-	sd->maxwidth = 640;
-	sd->maxheight = 480;
+/*	sd->sif = 0;		already done */
 	return 0;
 }
 
@@ -828,7 +833,7 @@ static int ov7xx0_configure(struct sd *sd)
 		{ OV7670_REG_COM7, OV7670_COM7_RESET },
 		{ OV7670_REG_TSLB, 0x04 },		/* OV */
 		{ OV7670_REG_COM7, OV7670_COM7_FMT_VGA }, /* VGA */
-		{ OV7670_REG_CLKRC, 0x1 },
+		{ OV7670_REG_CLKRC, 0x01 },
 	/*
 	 * Set the hardware window.  These values from OV don't entirely
 	 * make sense - hstop is less than hstart.  But they work...
@@ -842,16 +847,12 @@ static int ov7xx0_configure(struct sd *sd)
 		{ 0x70, 0x3a },		{ 0x71, 0x35 },
 		{ 0x72, 0x11 },		{ 0x73, 0xf0 },
 		{ 0xa2, 0x02 },
-/* jfm */
-/* { OV7670_REG_COM10, 0x0 }, */
+/*		{ OV7670_REG_COM10, 0x0 }, */
 
 	/* Gamma curve values */
 		{ 0x7a, 0x20 },
-/* jfm:win 7b=1c */
 		{ 0x7b, 0x10 },
-/* jfm:win 7c=28 */
 		{ 0x7c, 0x1e },
-/* jfm:win 7d=3c */
 		{ 0x7d, 0x35 },
 		{ 0x7e, 0x5a },		{ 0x7f, 0x69 },
 		{ 0x80, 0x76 },		{ 0x81, 0x80 },
@@ -867,13 +868,11 @@ static int ov7xx0_configure(struct sd *sd)
 				 | OV7670_COM8_BFILT },
 		{ OV7670_REG_GAIN, 0 },	{ OV7670_REG_AECH, 0 },
 		{ OV7670_REG_COM4, 0x40 }, /* magic reserved bit */
-/* jfm:win 14=38 */
 		{ OV7670_REG_COM9, 0x18 }, /* 4x gain + magic rsvd bit */
 		{ OV7670_REG_BD50MAX, 0x05 },	{ OV7670_REG_BD60MAX, 0x07 },
 		{ OV7670_REG_AEW, 0x95 },	{ OV7670_REG_AEB, 0x33 },
 		{ OV7670_REG_VPT, 0xe3 },	{ OV7670_REG_HAECC1, 0x78 },
 		{ OV7670_REG_HAECC2, 0x68 },
-/* jfm:win a1=0b */
 		{ 0xa1, 0x03 }, /* magic */
 		{ OV7670_REG_HAECC3, 0xd8 },	{ OV7670_REG_HAECC4, 0xd8 },
 		{ OV7670_REG_HAECC5, 0xf0 },	{ OV7670_REG_HAECC6, 0x90 },
@@ -887,8 +886,6 @@ static int ov7xx0_configure(struct sd *sd)
 	/* Almost all of these are magic "reserved" values.  */
 		{ OV7670_REG_COM5, 0x61 },	{ OV7670_REG_COM6, 0x4b },
 		{ 0x16, 0x02 },
-/* jfm */
-/*		{ OV7670_REG_MVFP, 0x07|OV7670_MVFP_MIRROR }, */
 		{ OV7670_REG_MVFP, 0x07 },
 		{ 0x21, 0x02 },		{ 0x22, 0x91 },
 		{ 0x29, 0x07 },		{ 0x33, 0x0b },
@@ -933,7 +930,10 @@ static int ov7xx0_configure(struct sd *sd)
 		{ OV7670_REG_EDGE, 0 },
 		{ 0x75, 0x05 },		{ 0x76, 0xe1 },
 		{ 0x4c, 0 },		{ 0x77, 0x01 },
-		{ OV7670_REG_COM13, 0xc3 },	{ 0x4b, 0x09 },
+		{ OV7670_REG_COM13, OV7670_COM13_GAMMA
+				  | OV7670_COM13_UVSAT
+				  | 2},		/* was 3 */
+		{ 0x4b, 0x09 },
 		{ 0xc9, 0x60 },		{ OV7670_REG_COM16, 0x38 },
 		{ 0x56, 0x40 },
 
@@ -959,30 +959,10 @@ static int ov7xx0_configure(struct sd *sd)
 		{ 0x79, 0x03 },		{ 0xc8, 0x40 },
 		{ 0x79, 0x05 },		{ 0xc8, 0x30 },
 		{ 0x79, 0x26 },
-
-	/* Format YUV422 */
-		{ OV7670_REG_COM7, OV7670_COM7_YUV },  /* Selects YUV mode */
-		{ OV7670_REG_RGB444, 0 },	/* No RGB444 please */
-		{ OV7670_REG_COM1, 0 },
-		{ OV7670_REG_COM15, OV7670_COM15_R00FF },
-		{ OV7670_REG_COM9, 0x18 },
-				/* 4x gain ceiling; 0x8 is reserved bit */
-		{ 0x4f, 0x80 }, 	/* "matrix coefficient 1" */
-		{ 0x50, 0x80 }, 	/* "matrix coefficient 2" */
-		{ 0x52, 0x22 }, 	/* "matrix coefficient 4" */
-		{ 0x53, 0x5e }, 	/* "matrix coefficient 5" */
-		{ 0x54, 0x80 }, 	/* "matrix coefficient 6" */
-		{ OV7670_REG_COM13, OV7670_COM13_GAMMA|OV7670_COM13_UVSAT },
-};
+	};
 
 	PDEBUG(D_PROBE, "starting OV7xx0 configuration");
 
-/* jfm:already done? */
-	if (init_ov_sensor(sd) < 0)
-		PDEBUG(D_ERR, "Failed to read sensor ID");
-	else
-		PDEBUG(D_PROBE, "OV7xx0 initialized");
-
 	/* Detect sensor (sub)type */
 	rc = i2c_r(sd, OV7610_REG_COM_I);
 
@@ -1028,20 +1008,25 @@ static int ov7xx0_configure(struct sd *sd)
 			return low;
 		}
 		if (high == 0x76) {
-			if (low == 0x30) {
+			switch (low) {
+			case 0x30:
 				PDEBUG(D_PROBE, "Sensor is an OV7630/OV7635");
 				sd->sensor = SEN_OV7630;
-			} else if (low == 0x40) {
+				break;
+			case 0x40:
 				PDEBUG(D_PROBE, "Sensor is an OV7645");
 				sd->sensor = SEN_OV7640; /* FIXME */
-			} else if (low == 0x45) {
+				break;
+			case 0x45:
 				PDEBUG(D_PROBE, "Sensor is an OV7645B");
 				sd->sensor = SEN_OV7640; /* FIXME */
-			} else if (low == 0x48) {
+				break;
+			case 0x48:
 				PDEBUG(D_PROBE, "Sensor is an OV7648");
 				sd->sensor = SEN_OV7640; /* FIXME */
-			} else {
-				PDEBUG(D_PROBE, "Unknown sensor: 0x76%X", low);
+				break;
+			default:
+				PDEBUG(D_PROBE, "Unknown sensor: 0x76%x", low);
 				return -1;
 			}
 		} else {
@@ -1053,34 +1038,34 @@ static int ov7xx0_configure(struct sd *sd)
 		return -1;
 	}
 
-	if (sd->sensor == SEN_OV7620) {
+	switch (sd->sensor) {
+	case SEN_OV7620:
 		PDEBUG(D_PROBE, "Writing 7620 registers");
-		if (write_i2c_regvals(sd, norm_7620,
-				sizeof norm_7620 / sizeof norm_7620[0]))
+		if (write_i2c_regvals(sd, norm_7620, ARRAY_SIZE(norm_7620)))
 			return -1;
-	} else if (sd->sensor == SEN_OV7630) {
+		break;
+	case SEN_OV7630:
 		PDEBUG(D_ERR, "7630 is not supported by this driver version");
 		return -1;
-	} else if (sd->sensor == SEN_OV7640) {
+	case SEN_OV7640:
 		PDEBUG(D_PROBE, "Writing 7640 registers");
-		if (write_i2c_regvals(sd, norm_7640,
-				sizeof norm_7640 / sizeof norm_7640[0]))
+		if (write_i2c_regvals(sd, norm_7640, ARRAY_SIZE(norm_7640)))
 			return -1;
-	} else if (sd->sensor == SEN_OV7670) {
+		break;
+	case SEN_OV7670:
 		PDEBUG(D_PROBE, "Writing 7670 registers");
-		if (write_i2c_regvals(sd, norm_7670,
-				sizeof norm_7670 / sizeof norm_7670[0]))
+		if (write_i2c_regvals(sd, norm_7670, ARRAY_SIZE(norm_7670)))
 			return -1;
-	} else {
+		break;
+	default:
 		PDEBUG(D_PROBE, "Writing 7610 registers");
-		if (write_i2c_regvals(sd, norm_7610,
-				sizeof norm_7610 / sizeof norm_7610[0]))
+		if (write_i2c_regvals(sd, norm_7610, ARRAY_SIZE(norm_7610)))
 			return -1;
+		break;
 	}
 
 	/* Set sensor-specific vars */
-	sd->maxwidth = 640;
-	sd->maxheight = 480;
+/*	sd->sif = 0;		already done */
 	return 0;
 }
 
@@ -1234,43 +1219,45 @@ static int ov6xx0_configure(struct sd *sd)
 	/* Ugh. The first two bits are the version bits, but
 	 * the entire register value must be used. I guess OVT
 	 * underestimated how many variants they would make. */
-	if (rc == 0x00) {
+	switch (rc) {
+	case 0x00:
 		sd->sensor = SEN_OV6630;
 		PDEBUG(D_ERR,
 			"WARNING: Sensor is an OV66308. Your camera may have");
 		PDEBUG(D_ERR, "been misdetected in previous driver versions.");
-	} else if (rc == 0x01) {
+		break;
+	case 0x01:
 		sd->sensor = SEN_OV6620;
-		PDEBUG(D_PROBE, "Sensor is an OV6620");
-	} else if (rc == 0x02) {
+		break;
+	case 0x02:
 		sd->sensor = SEN_OV6630;
 		PDEBUG(D_PROBE, "Sensor is an OV66308AE");
-	} else if (rc == 0x03) {
+		break;
+	case 0x03:
 		sd->sensor = SEN_OV6630;
 		PDEBUG(D_PROBE, "Sensor is an OV66308AF");
-	} else if (rc == 0x90) {
+		break;
+	case 0x90:
 		sd->sensor = SEN_OV6630;
 		PDEBUG(D_ERR,
 			"WARNING: Sensor is an OV66307. Your camera may have");
 		PDEBUG(D_ERR, "been misdetected in previous driver versions.");
-	} else {
+		break;
+	default:
 		PDEBUG(D_ERR, "FATAL: Unknown sensor version: 0x%02x", rc);
 		return -1;
 	}
 
 	/* Set sensor-specific vars */
-	sd->maxwidth = 352;
-	sd->maxheight = 288;
+	sd->sif = 1;
 
 	if (sd->sensor == SEN_OV6620) {
 		PDEBUG(D_PROBE, "Writing 6x20 registers");
-		if (write_i2c_regvals(sd, norm_6x20,
-				sizeof norm_6x20 / sizeof norm_6x20[0]))
+		if (write_i2c_regvals(sd, norm_6x20, ARRAY_SIZE(norm_6x20)))
 			return -1;
 	} else {
 		PDEBUG(D_PROBE, "Writing 6x30 registers");
-		if (write_i2c_regvals(sd, norm_6x30,
-				sizeof norm_6x30 / sizeof norm_6x30[0]))
+		if (write_i2c_regvals(sd, norm_6x30, ARRAY_SIZE(norm_6x30)))
 			return -1;
 	}
 	return 0;
@@ -1279,14 +1266,8 @@ static int ov6xx0_configure(struct sd *sd)
 /* Turns on or off the LED. Only has an effect with OV511+/OV518(+)/OV519 */
 static void ov51x_led_control(struct sd *sd, int on)
 {
-	PDEBUG(D_STREAM, "LED (%s)", on ? "on" : "off");
-
-/*	if (sd->bridge == BRG_OV511PLUS) */
-/*		reg_w(sd, R511_SYS_LED_CTL, on ? 1 : 0); */
-/*	else if (sd->bridge == BRG_OV519) */
-		reg_w_mask(sd, OV519_GPIO_DATA_OUT0, !on, 1);	/* 0 / 1 */
-/*	else if (sd->bclass == BCL_OV518) */
-/*		reg_w_mask(sd, R518_GPIO_OUT, on ? 0x02 : 0x00, 0x02); */
+/*	PDEBUG(D_STREAM, "LED (%s)", on ? "on" : "off"); */
+	reg_w_mask(sd, OV519_GPIO_DATA_OUT0, !on, 1);	/* 0 / 1 */
 }
 
 /* this function is called at probe time */
@@ -1296,11 +1277,8 @@ static int sd_config(struct gspca_dev *gspca_dev,
 	struct sd *sd = (struct sd *) gspca_dev;
 	struct cam *cam;
 
-/* (from ov519_configure) */
 	static const struct ov_regvals init_519[] = {
 		{ 0x5a,  0x6d }, /* EnableSystem */
-/* jfm trace usbsnoop3-1.txt */
-/* jfm 53 = fb */
 		{ 0x53,  0x9b },
 		{ 0x54,  0xff }, /* set bit2 to enable jpeg */
 		{ 0x5d,  0x03 },
@@ -1317,9 +1295,6 @@ static int sd_config(struct gspca_dev *gspca_dev,
 
 	if (write_regvals(sd, init_519, ARRAY_SIZE(init_519)))
 		goto error;
-/* jfm: not seen in windows trace */
-	if (ov519_init_compression(sd))
-		goto error;
 	ov51x_led_control(sd, 0);	/* turn LED off */
 
 	/* Test for 76xx */
@@ -1368,17 +1343,18 @@ static int sd_config(struct gspca_dev *gspca_dev,
 
 	cam = &gspca_dev->cam;
 	cam->epaddr = OV511_ENDPOINT_ADDRESS;
-	if (sd->maxwidth == 640) {
+	if (!sd->sif) {
 		cam->cam_mode = vga_mode;
-		cam->nmodes = sizeof vga_mode / sizeof vga_mode[0];
+		cam->nmodes = ARRAY_SIZE(vga_mode);
 	} else {
 		cam->cam_mode = sif_mode;
-		cam->nmodes = sizeof sif_mode / sizeof sif_mode[0];
+		cam->nmodes = ARRAY_SIZE(sif_mode);
 	}
-	cam->dev_name = (char *) id->driver_info;
-	sd->brightness = sd_ctrls[SD_BRIGHTNESS].qctrl.default_value;
-	sd->contrast = sd_ctrls[SD_CONTRAST].qctrl.default_value;
-	sd->colors = sd_ctrls[SD_COLOR].qctrl.default_value;
+	sd->brightness = BRIGHTNESS_DEF;
+	sd->contrast = CONTRAST_DEF;
+	sd->colors = COLOR_DEF;
+	sd->hflip = HFLIP_DEF;
+	sd->vflip = VFLIP_DEF;
 	return 0;
 error:
 	PDEBUG(D_ERR, "OV519 Config failed");
@@ -1398,8 +1374,7 @@ static int sd_open(struct gspca_dev *gspca_dev)
  *
  * Do not put any sensor-specific code in here (including I2C I/O functions)
  */
-static int ov519_mode_init_regs(struct sd *sd,
-				int width, int height)
+static int ov519_mode_init_regs(struct sd *sd)
 {
 	static const struct ov_regvals mode_init_519_ov7670[] = {
 		{ 0x5d,	0x03 }, /* Turn off suspend mode */
@@ -1445,36 +1420,23 @@ static int ov519_mode_init_regs(struct sd *sd,
 		/* windows reads 0x55 at this point, why? */
 	};
 
-/* int hi_res; */
-
-	PDEBUG(D_CONF, "mode init %dx%d", width, height);
-
-/*	if (width >= 800 && height >= 600)
-		hi_res = 1;
-	else
-		hi_res = 0; */
-
-/*	if (ov51x_stop(sd) < 0)
-		return -EIO; */
-
 	/******** Set the mode ********/
 	if (sd->sensor != SEN_OV7670) {
 		if (write_regvals(sd, mode_init_519,
 				  ARRAY_SIZE(mode_init_519)))
 			return -EIO;
+		if (sd->sensor == SEN_OV7640) {
+			/* Select 8-bit input mode */
+			reg_w_mask(sd, OV519_CAM_DFR, 0x10, 0x10);
+		}
 	} else {
 		if (write_regvals(sd, mode_init_519_ov7670,
 				  ARRAY_SIZE(mode_init_519_ov7670)))
 			return -EIO;
 	}
 
-	if (sd->sensor == SEN_OV7640) {
-		/* Select 8-bit input mode */
-		reg_w_mask(sd, OV519_CAM_DFR, 0x10, 0x10);
-	}
-
-	reg_w(sd, OV519_CAM_H_SIZE,	width >> 4);
-	reg_w(sd, OV519_CAM_V_SIZE,	height >> 3);
+	reg_w(sd, OV519_CAM_H_SIZE,	sd->gspca_dev.width >> 4);
+	reg_w(sd, OV519_CAM_V_SIZE,	sd->gspca_dev.height >> 3);
 	reg_w(sd, OV519_CAM_X_OFFSETL,	0x00);
 	reg_w(sd, OV519_CAM_X_OFFSETH,	0x00);
 	reg_w(sd, OV519_CAM_Y_OFFSETL,	0x00);
@@ -1489,9 +1451,10 @@ static int ov519_mode_init_regs(struct sd *sd,
 
 /* FIXME: These are only valid at the max resolution. */
 	sd->clockdiv = 0;
-	if (sd->sensor == SEN_OV7640) {
+	switch (sd->sensor) {
+	case SEN_OV7640:
 		switch (sd->frame_rate) {
-/*jfm: default was 30 fps */
+/*fixme: default was 30 fps */
 		case 30:
 			reg_w(sd, 0xa4, 0x0c);
 			reg_w(sd, 0x23, 0xff);
@@ -1521,7 +1484,8 @@ static int ov519_mode_init_regs(struct sd *sd,
 			sd->clockdiv = 1;
 			break;
 		}
-	} else if (sd->sensor == SEN_OV8610) {
+		break;
+	case SEN_OV8610:
 		switch (sd->frame_rate) {
 		default:	/* 15 fps */
 /*		case 15: */
@@ -1537,41 +1501,37 @@ static int ov519_mode_init_regs(struct sd *sd,
 			reg_w(sd, 0x23, 0x1b);
 			break;
 		}
-		sd->clockdiv = 0;
-	} else if (sd->sensor == SEN_OV7670) { /* guesses, based on 7640 */
+		break;
+	case SEN_OV7670:		/* guesses, based on 7640 */
 		PDEBUG(D_STREAM, "Setting framerate to %d fps",
 				 (sd->frame_rate == 0) ? 15 : sd->frame_rate);
+		reg_w(sd, 0xa4, 0x10);
 		switch (sd->frame_rate) {
 		case 30:
-			reg_w(sd, 0xa4, 0x10);
 			reg_w(sd, 0x23, 0xff);
 			break;
 		case 20:
-			reg_w(sd, 0xa4, 0x10);
 			reg_w(sd, 0x23, 0x1b);
 			break;
-		default: /* 15 fps */
-/*			case 15: */
-			reg_w(sd, 0xa4, 0x10);
+		default:
+/*		case 15: */
 			reg_w(sd, 0x23, 0xff);
 			sd->clockdiv = 1;
 			break;
 		}
+		break;
 	}
 
-/*	if (ov51x_restart(sd) < 0)
-		return -EIO; */
-
-	/* Reset it just for good measure */
-/*	if (ov51x_reset(sd, OV511_RESET_NOREGS) < 0)
-		return -EIO; */
 	return 0;
 }
 
-static int mode_init_ov_sensor_regs(struct sd *sd,
-				struct ovsensor_window *win)
+static int mode_init_ov_sensor_regs(struct sd *sd)
 {
-	int qvga = win->quarter;
+	struct gspca_dev *gspca_dev;
+	int qvga;
+
+	gspca_dev = &sd->gspca_dev;
+	qvga = gspca_dev->cam.cam_mode[(int) gspca_dev->curr_mode].priv;
 
 	/******** Mode (VGA/QVGA) and sensor specific regs ********/
 	switch (sd->sensor) {
@@ -1615,8 +1575,6 @@ static int mode_init_ov_sensor_regs(struct sd *sd,
 			 OV7670_COM7_FMT_MASK);
 		break;
 	case SEN_OV6620:
-		i2c_w_mask(sd, 0x14, qvga ? 0x20 : 0x00, 0x20);
-		break;
 	case SEN_OV6630:
 		i2c_w_mask(sd, 0x14, qvga ? 0x20 : 0x00, 0x20);
 		break;
@@ -1625,24 +1583,21 @@ static int mode_init_ov_sensor_regs(struct sd *sd,
 	}
 
 	/******** Palette-specific regs ********/
-/* Need to do work here for the OV7670 */
-
-		if (sd->sensor == SEN_OV7610 || sd->sensor == SEN_OV76BE) {
-			/* not valid on the OV6620/OV7620/6630? */
-			i2c_w_mask(sd, 0x0e, 0x00, 0x40);
-		}
+	if (sd->sensor == SEN_OV7610 || sd->sensor == SEN_OV76BE) {
+		/* not valid on the OV6620/OV7620/6630? */
+		i2c_w_mask(sd, 0x0e, 0x00, 0x40);
+	}
 
-		/* The OV518 needs special treatment. Although both the OV518
-		 * and the OV6630 support a 16-bit video bus, only the 8 bit Y
-		 * bus is actually used. The UV bus is tied to ground.
-		 * Therefore, the OV6630 needs to be in 8-bit multiplexed
-		 * output mode */
+	/* The OV518 needs special treatment. Although both the OV518
+	 * and the OV6630 support a 16-bit video bus, only the 8 bit Y
+	 * bus is actually used. The UV bus is tied to ground.
+	 * Therefore, the OV6630 needs to be in 8-bit multiplexed
+	 * output mode */
 
-		/* OV7640 is 8-bit only */
+	/* OV7640 is 8-bit only */
 
-		if (sd->sensor != SEN_OV6630 && sd->sensor != SEN_OV7640)
-			i2c_w_mask(sd, 0x13, 0x00, 0x20);
-/*	} */
+	if (sd->sensor != SEN_OV6630 && sd->sensor != SEN_OV7640)
+		i2c_w_mask(sd, 0x13, 0x00, 0x20);
 
 	/******** Clock programming ********/
 	/* The OV6620 needs special handling. This prevents the
@@ -1651,14 +1606,14 @@ static int mode_init_ov_sensor_regs(struct sd *sd,
 
 		/* Clock down */
 		i2c_w(sd, 0x2a, 0x04);
-		i2c_w(sd, 0x11, win->clockdiv);
+		i2c_w(sd, 0x11, sd->clockdiv);
 		i2c_w(sd, 0x2a, 0x84);
 		/* This next setting is critical. It seems to improve
 		 * the gain or the contrast. The "reserved" bits seem
 		 * to have some effect in this case. */
 		i2c_w(sd, 0x2d, 0x85);
-	} else if (win->clockdiv >= 0) {
-		i2c_w(sd, 0x11, win->clockdiv);
+	} else if (sd->clockdiv >= 0) {
+		i2c_w(sd, 0x11, sd->clockdiv);
 	}
 
 	/******** Special Features ********/
@@ -1678,7 +1633,7 @@ static int mode_init_ov_sensor_regs(struct sd *sd,
 	/* is fully tested. */
 	/* 7620/6620/6630? don't have register 0x35, so play it safe */
 	if (sd->sensor == SEN_OV7610 || sd->sensor == SEN_OV76BE) {
-		if (win->width == 640 /*&& win->height == 480*/)
+		if (!qvga)
 			i2c_w(sd, 0x35, 0x9e);
 		else
 			i2c_w(sd, 0x35, 0x1e);
@@ -1686,13 +1641,31 @@ static int mode_init_ov_sensor_regs(struct sd *sd,
 	return 0;
 }
 
-static int set_ov_sensor_window(struct sd *sd,
-				struct ovsensor_window *win)
+static void sethvflip(struct sd *sd)
 {
+	if (sd->sensor != SEN_OV7670)
+		return;
+	if (sd->gspca_dev.streaming)
+		ov51x_stop(sd);
+	i2c_w_mask(sd, OV7670_REG_MVFP,
+		OV7670_MVFP_MIRROR * sd->hflip
+			| OV7670_MVFP_VFLIP * sd->vflip,
+		OV7670_MVFP_MIRROR | OV7670_MVFP_VFLIP);
+	if (sd->gspca_dev.streaming)
+		ov51x_restart(sd);
+}
+
+static int set_ov_sensor_window(struct sd *sd)
+{
+	struct gspca_dev *gspca_dev;
+	int qvga;
 	int hwsbase, hwebase, vwsbase, vwebase, hwscale, vwscale;
 	int ret, hstart, hstop, vstop, vstart;
 	__u8 v;
 
+	gspca_dev = &sd->gspca_dev;
+	qvga = gspca_dev->cam.cam_mode[(int) gspca_dev->curr_mode].priv;
+
 	/* The different sensor ICs handle setting up of window differently.
 	 * IF YOU SET IT WRONG, YOU WILL GET ALL ZERO ISOC DATA FROM OV51x!! */
 	switch (sd->sensor) {
@@ -1737,7 +1710,7 @@ static int set_ov_sensor_window(struct sd *sd,
 	switch (sd->sensor) {
 	case SEN_OV6620:
 	case SEN_OV6630:
-		if (win->quarter) {	/* QCIF */
+		if (qvga) {		/* QCIF */
 			hwscale = 0;
 			vwscale = 0;
 		} else {		/* CIF */
@@ -1747,7 +1720,7 @@ static int set_ov_sensor_window(struct sd *sd,
 		}
 		break;
 	case SEN_OV8610:
-		if (win->quarter) {	/* QSVGA */
+		if (qvga) {		/* QSVGA */
 			hwscale = 1;
 			vwscale = 1;
 		} else {		/* SVGA */
@@ -1756,7 +1729,7 @@ static int set_ov_sensor_window(struct sd *sd,
 		}
 		break;
 	default:			/* SEN_OV7xx0 */
-		if (win->quarter) {	/* QVGA */
+		if (qvga) {		/* QVGA */
 			hwscale = 1;
 			vwscale = 0;
 		} else {		/* VGA */
@@ -1765,7 +1738,7 @@ static int set_ov_sensor_window(struct sd *sd,
 		}
 	}
 
-	ret = mode_init_ov_sensor_regs(sd, win);
+	ret = mode_init_ov_sensor_regs(sd);
 	if (ret < 0)
 		return ret;
 
@@ -1786,7 +1759,7 @@ static int set_ov_sensor_window(struct sd *sd,
 	/* I can hard code this for OV7670s */
 	/* Yes, these numbers do look odd, but they're tested and work! */
 	if (sd->sensor == SEN_OV7670) {
-		if (win->quarter) {	/* QVGA from ov7670.c by
+		if (qvga) {		/* QVGA from ov7670.c by
 					 * Jonathan Corbet */
 			hstart = 164;
 			hstop = 20;
@@ -1800,75 +1773,45 @@ static int set_ov_sensor_window(struct sd *sd,
 		}
 		/* OV7670 hardware window registers are split across
 		 * multiple locations */
-		i2c_w(sd, OV7670_REG_HSTART, (hstart >> 3) & 0xff);
-		i2c_w(sd, OV7670_REG_HSTOP, (hstop >> 3) & 0xff);
+		i2c_w(sd, OV7670_REG_HSTART, hstart >> 3);
+		i2c_w(sd, OV7670_REG_HSTOP, hstop >> 3);
 		v = i2c_r(sd, OV7670_REG_HREF);
 		v = (v & 0xc0) | ((hstop & 0x7) << 3) | (hstart & 0x07);
 		msleep(10);	/* need to sleep between read and write to
 				 * same reg! */
 		i2c_w(sd, OV7670_REG_HREF, v);
 
-		i2c_w(sd, OV7670_REG_VSTART, (vstart >> 2) & 0xff);
-		i2c_w(sd, OV7670_REG_VSTOP, (vstop >> 2) & 0xff);
+		i2c_w(sd, OV7670_REG_VSTART, vstart >> 2);
+		i2c_w(sd, OV7670_REG_VSTOP, vstop >> 2);
 		v = i2c_r(sd, OV7670_REG_VREF);
 		v = (v & 0xc0) | ((vstop & 0x3) << 2) | (vstart & 0x03);
 		msleep(10);	/* need to sleep between read and write to
 				 * same reg! */
 		i2c_w(sd, OV7670_REG_VREF, v);
-
+		sethvflip(sd);
 	} else {
-		i2c_w(sd, 0x17, hwsbase + (win->x >> hwscale));
-		i2c_w(sd, 0x18, hwebase + ((win->x + win->width) >> hwscale));
-		i2c_w(sd, 0x19, vwsbase + (win->y >> vwscale));
-		i2c_w(sd, 0x1a, vwebase + ((win->y + win->height) >> vwscale));
+		i2c_w(sd, 0x17, hwsbase);
+		i2c_w(sd, 0x18, hwebase + (sd->gspca_dev.width >> hwscale));
+		i2c_w(sd, 0x19, vwsbase);
+		i2c_w(sd, 0x1a, vwebase + (sd->gspca_dev.height >> vwscale));
 	}
 	return 0;
 }
 
-static int ov_sensor_mode_setup(struct sd *sd,
-				int width, int height)
-{
-	struct ovsensor_window win;
-
-/*	win.format = mode; */
-
-	/* Unless subcapture is enabled,
-	 * center the image window and downsample
-	 * if possible to increase the field of view */
-	/* NOTE: OV518(+) and OV519 does downsampling on its own */
-	win.width = width;
-	win.height = height;
-	if (width == sd->maxwidth)
-		win.quarter = 0;
-	else
-		win.quarter = 1;
-
-	/* Center it */
-	win.x = (win.width - width) / 2;
-	win.y = (win.height - height) / 2;
-
-	/* Clock is determined by OV519 frame rate code */
-	win.clockdiv = sd->clockdiv;
-
-	PDEBUG(D_CONF, "Setting clock divider to %d", win.clockdiv);
-	return set_ov_sensor_window(sd, &win);
-}
-
 /* -- start the camera -- */
 static void sd_start(struct gspca_dev *gspca_dev)
 {
 	struct sd *sd = (struct sd *) gspca_dev;
 	int ret;
 
-
-	ret = ov519_mode_init_regs(sd, gspca_dev->width, gspca_dev->height);
+	ret = ov519_mode_init_regs(sd);
 	if (ret < 0)
 		goto out;
-	ret = ov_sensor_mode_setup(sd, gspca_dev->width, gspca_dev->height);
+	ret = set_ov_sensor_window(sd);
 	if (ret < 0)
 		goto out;
 
-	ret = ov51x_restart((struct sd *) gspca_dev);
+	ret = ov51x_restart(sd);
 	if (ret < 0)
 		goto out;
 	PDEBUG(D_STREAM, "camera started alt: 0x%02x", gspca_dev->alt);
@@ -1942,12 +1885,10 @@ static void setbrightness(struct gspca_dev *gspca_dev)
 {
 	struct sd *sd = (struct sd *) gspca_dev;
 	int val;
-/*	int was_streaming; */
 
 	val = sd->brightness;
 	PDEBUG(D_CONF, "brightness:%d", val);
-/*	was_streaming = gspca_dev->streaming;
- *	if (was_streaming)
+/*	if (gspca_dev->streaming)
  *		ov51x_stop(sd); */
 	switch (sd->sensor) {
 	case SEN_OV8610:
@@ -1965,12 +1906,12 @@ static void setbrightness(struct gspca_dev *gspca_dev)
 			i2c_w(sd, OV7610_REG_BRT, val);
 		break;
 	case SEN_OV7670:
-/*jfm - from windblows
+/*win trace
  *		i2c_w_mask(sd, OV7670_REG_COM8, 0, OV7670_COM8_AEC); */
 		i2c_w(sd, OV7670_REG_BRIGHT, ov7670_abs_to_sm(val));
 		break;
 	}
-/*	if (was_streaming)
+/*	if (gspca_dev->streaming)
  *		ov51x_restart(sd); */
 }
 
@@ -1978,12 +1919,10 @@ static void setcontrast(struct gspca_dev *gspca_dev)
 {
 	struct sd *sd = (struct sd *) gspca_dev;
 	int val;
-/*	int was_streaming; */
 
 	val = sd->contrast;
 	PDEBUG(D_CONF, "contrast:%d", val);
-/*	was_streaming = gspca_dev->streaming;
-	if (was_streaming)
+/*	if (gspca_dev->streaming)
 		ov51x_stop(sd); */
 	switch (sd->sensor) {
 	case SEN_OV7610:
@@ -2020,7 +1959,7 @@ static void setcontrast(struct gspca_dev *gspca_dev)
 		i2c_w(sd, OV7670_REG_CONTRAS, val >> 1);
 		break;
 	}
-/*	if (was_streaming)
+/*	if (gspca_dev->streaming)
 		ov51x_restart(sd); */
 }
 
@@ -2028,12 +1967,10 @@ static void setcolors(struct gspca_dev *gspca_dev)
 {
 	struct sd *sd = (struct sd *) gspca_dev;
 	int val;
-/*	int was_streaming; */
 
 	val = sd->colors;
 	PDEBUG(D_CONF, "saturation:%d", val);
-/*	was_streaming = gspca_dev->streaming;
-	if (was_streaming)
+/*	if (gspca_dev->streaming)
 		ov51x_stop(sd); */
 	switch (sd->sensor) {
 	case SEN_OV8610:
@@ -2059,7 +1996,7 @@ static void setcolors(struct gspca_dev *gspca_dev)
 		/* set REG_COM13 values for UV sat auto mode */
 		break;
 	}
-/*	if (was_streaming)
+/*	if (gspca_dev->streaming)
 		ov51x_restart(sd); */
 }
 
@@ -2114,6 +2051,40 @@ static int sd_getcolors(struct gspca_dev *gspca_dev, __s32 *val)
 	return 0;
 }
 
+static int sd_sethflip(struct gspca_dev *gspca_dev, __s32 val)
+{
+	struct sd *sd = (struct sd *) gspca_dev;
+
+	sd->hflip = val;
+	sethvflip(sd);
+	return 0;
+}
+
+static int sd_gethflip(struct gspca_dev *gspca_dev, __s32 *val)
+{
+	struct sd *sd = (struct sd *) gspca_dev;
+
+	*val = sd->hflip;
+	return 0;
+}
+
+static int sd_setvflip(struct gspca_dev *gspca_dev, __s32 val)
+{
+	struct sd *sd = (struct sd *) gspca_dev;
+
+	sd->vflip = val;
+	sethvflip(sd);
+	return 0;
+}
+
+static int sd_getvflip(struct gspca_dev *gspca_dev, __s32 *val)
+{
+	struct sd *sd = (struct sd *) gspca_dev;
+
+	*val = sd->vflip;
+	return 0;
+}
+
 /* sub-driver description */
 static const struct sd_desc sd_desc = {
 	.name = MODULE_NAME,
@@ -2129,21 +2100,20 @@ static const struct sd_desc sd_desc = {
 };
 
 /* -- module initialisation -- */
-#define DVNM(name) .driver_info = (kernel_ulong_t) name
 static const __devinitdata struct usb_device_id device_table[] = {
-	{USB_DEVICE(0x041e, 0x4052), DVNM("Creative Live! VISTA IM")},
-	{USB_DEVICE(0x041e, 0x405f), DVNM("Creative Live! VISTA VF0330")},
-	{USB_DEVICE(0x041e, 0x4060), DVNM("Creative Live! VISTA VF0350")},
-	{USB_DEVICE(0x041e, 0x4061), DVNM("Creative Live! VISTA VF0400")},
-	{USB_DEVICE(0x041e, 0x4064), DVNM("Creative Live! VISTA VF0420")},
-	{USB_DEVICE(0x041e, 0x4068), DVNM("Creative Live! VISTA VF0470")},
-	{USB_DEVICE(0x045e, 0x028c), DVNM("Microsoft xbox cam")},
-	{USB_DEVICE(0x054c, 0x0154), DVNM("Sonny toy4")},
-	{USB_DEVICE(0x054c, 0x0155), DVNM("Sonny toy5")},
-	{USB_DEVICE(0x05a9, 0x0519), DVNM("OmniVision")},
-	{USB_DEVICE(0x05a9, 0x0530), DVNM("OmniVision")},
-	{USB_DEVICE(0x05a9, 0x4519), DVNM("OmniVision")},
-	{USB_DEVICE(0x05a9, 0x8519), DVNM("OmniVision")},
+	{USB_DEVICE(0x041e, 0x4052)},
+	{USB_DEVICE(0x041e, 0x405f)},
+	{USB_DEVICE(0x041e, 0x4060)},
+	{USB_DEVICE(0x041e, 0x4061)},
+	{USB_DEVICE(0x041e, 0x4064)},
+	{USB_DEVICE(0x041e, 0x4068)},
+	{USB_DEVICE(0x045e, 0x028c)},
+	{USB_DEVICE(0x054c, 0x0154)},
+	{USB_DEVICE(0x054c, 0x0155)},
+	{USB_DEVICE(0x05a9, 0x0519)},
+	{USB_DEVICE(0x05a9, 0x0530)},
+	{USB_DEVICE(0x05a9, 0x4519)},
+	{USB_DEVICE(0x05a9, 0x8519)},
 	{}
 };
 #undef DVNAME
@@ -2169,7 +2139,7 @@ static int __init sd_mod_init(void)
 {
 	if (usb_register(&sd_driver) < 0)
 		return -1;
-	PDEBUG(D_PROBE, "v%s registered", version);
+	PDEBUG(D_PROBE, "registered");
 	return 0;
 }
 static void __exit sd_mod_exit(void)
@@ -2183,4 +2153,3 @@ module_exit(sd_mod_exit);
 
 module_param(frame_rate, int, 0644);
 MODULE_PARM_DESC(frame_rate, "Frame rate (5, 10, 15, 20 or 30 fps)");
-
diff --git a/drivers/media/video/gspca/pac207.c b/drivers/media/video/gspca/pac207.c
index fa7abc411090..7ef18d578811 100644
--- a/drivers/media/video/gspca/pac207.c
+++ b/drivers/media/video/gspca/pac207.c
@@ -27,9 +27,6 @@
 
 #include "gspca.h"
 
-#define DRIVER_VERSION_NUMBER	KERNEL_VERSION(2, 1, 7)
-static const char version[] = "2.1.7";
-
 MODULE_AUTHOR("Hans de Goede <j.w.r.degoede@hhs.nl>");
 MODULE_DESCRIPTION("Pixart PAC207");
 MODULE_LICENSE("GPL");
@@ -208,7 +205,7 @@ static int pac207_write_regs(struct gspca_dev *gspca_dev, u16 index,
 }
 
 
-int pac207_write_reg(struct gspca_dev *gspca_dev, u16 index, u16 value)
+static int pac207_write_reg(struct gspca_dev *gspca_dev, u16 index, u16 value)
 {
 	struct usb_device *udev = gspca_dev->dev;
 	int err;
@@ -223,8 +220,7 @@ int pac207_write_reg(struct gspca_dev *gspca_dev, u16 index, u16 value)
 	return err;
 }
 
-
-int pac207_read_reg(struct gspca_dev *gspca_dev, u16 index)
+static int pac207_read_reg(struct gspca_dev *gspca_dev, u16 index)
 {
 	struct usb_device *udev = gspca_dev->dev;
 	int res;
@@ -574,17 +570,16 @@ static const struct sd_desc sd_desc = {
 };
 
 /* -- module initialisation -- */
-#define DVNM(name) .driver_info = (kernel_ulong_t) name
 static const __devinitdata struct usb_device_id device_table[] = {
-	{USB_DEVICE(0x041e, 0x4028), DVNM("Creative Webcam Vista Plus")},
-	{USB_DEVICE(0x093a, 0x2460), DVNM("Q-Tec Webcam 100")},
-	{USB_DEVICE(0x093a, 0x2463), DVNM("Philips spc200nc pac207")},
-	{USB_DEVICE(0x093a, 0x2464), DVNM("Labtec Webcam 1200")},
-	{USB_DEVICE(0x093a, 0x2468), DVNM("PAC207")},
-	{USB_DEVICE(0x093a, 0x2470), DVNM("Genius GF112")},
-	{USB_DEVICE(0x093a, 0x2471), DVNM("Genius VideoCam GE111")},
-	{USB_DEVICE(0x093a, 0x2472), DVNM("Genius VideoCam GE110")},
-	{USB_DEVICE(0x2001, 0xf115), DVNM("D-Link DSB-C120")},
+	{USB_DEVICE(0x041e, 0x4028)},
+	{USB_DEVICE(0x093a, 0x2460)},
+	{USB_DEVICE(0x093a, 0x2463)},
+	{USB_DEVICE(0x093a, 0x2464)},
+	{USB_DEVICE(0x093a, 0x2468)},
+	{USB_DEVICE(0x093a, 0x2470)},
+	{USB_DEVICE(0x093a, 0x2471)},
+	{USB_DEVICE(0x093a, 0x2472)},
+	{USB_DEVICE(0x2001, 0xf115)},
 	{}
 };
 MODULE_DEVICE_TABLE(usb, device_table);
@@ -609,7 +604,7 @@ static int __init sd_mod_init(void)
 {
 	if (usb_register(&sd_driver) < 0)
 		return -1;
-	PDEBUG(D_PROBE, "v%s registered", version);
+	PDEBUG(D_PROBE, "registered");
 	return 0;
 }
 static void __exit sd_mod_exit(void)
diff --git a/drivers/media/video/gspca/pac7311.c b/drivers/media/video/gspca/pac7311.c
index 5c052e31be4a..815bea6edc44 100644
--- a/drivers/media/video/gspca/pac7311.c
+++ b/drivers/media/video/gspca/pac7311.c
@@ -23,9 +23,6 @@
 
 #include "gspca.h"
 
-#define DRIVER_VERSION_NUMBER	KERNEL_VERSION(2, 1, 7)
-static const char version[] = "2.1.7";
-
 MODULE_AUTHOR("Thomas Kaiser thomas@kaiser-linux.li");
 MODULE_DESCRIPTION("Pixart PAC7311");
 MODULE_LICENSE("GPL");
@@ -34,7 +31,9 @@ MODULE_LICENSE("GPL");
 struct sd {
 	struct gspca_dev gspca_dev;		/* !! must be the first item */
 
-	int avg_lum;
+	int lum_sum;
+	atomic_t avg_lum;
+	atomic_t do_gain;
 
 	unsigned char brightness;
 	unsigned char contrast;
@@ -266,7 +265,6 @@ static int sd_config(struct gspca_dev *gspca_dev,
 	reg_w(gspca_dev, 0x3e, 0x20);
 
 	cam = &gspca_dev->cam;
-	cam->dev_name = (char *) id->driver_info;
 	cam->epaddr = 0x05;
 	cam->cam_mode = vga_mode;
 	cam->nmodes = ARRAY_SIZE(vga_mode);
@@ -275,6 +273,7 @@ static int sd_config(struct gspca_dev *gspca_dev,
 	sd->contrast = CONTRAST_DEF;
 	sd->colors = COLOR_DEF;
 	sd->autogain = AUTOGAIN_DEF;
+	sd->ag_cnt = -1;
 	return 0;
 }
 
@@ -315,6 +314,18 @@ static void setcolors(struct gspca_dev *gspca_dev)
 	PDEBUG(D_CONF|D_STREAM, "color: %i", sd->colors);
 }
 
+static void setautogain(struct gspca_dev *gspca_dev)
+{
+	struct sd *sd = (struct sd *) gspca_dev;
+
+	if (sd->autogain) {
+		sd->lum_sum = 0;
+		sd->ag_cnt = AG_CNT_START;
+	} else {
+		sd->ag_cnt = -1;
+	}
+}
+
 /* this function is called at open time */
 static int sd_open(struct gspca_dev *gspca_dev)
 {
@@ -324,8 +335,6 @@ static int sd_open(struct gspca_dev *gspca_dev)
 
 static void sd_start(struct gspca_dev *gspca_dev)
 {
-	struct sd *sd = (struct sd *) gspca_dev;
-
 	reg_w(gspca_dev, 0xff, 0x01);
 	reg_w_buf(gspca_dev, 0x0002, "\x48\x0a\x40\x08\x00\x00\x08\x00", 8);
 	reg_w_buf(gspca_dev, 0x000a, "\x06\xff\x11\xff\x5a\x30\x90\x4c", 8);
@@ -398,6 +407,7 @@ static void sd_start(struct gspca_dev *gspca_dev)
 	setcontrast(gspca_dev);
 	setbrightness(gspca_dev);
 	setcolors(gspca_dev);
+	setautogain(gspca_dev);
 
 	/* set correct resolution */
 	switch (gspca_dev->cam.cam_mode[(int) gspca_dev->curr_mode].priv) {
@@ -435,13 +445,6 @@ static void sd_start(struct gspca_dev *gspca_dev)
 	reg_w(gspca_dev, 0xff, 0x01);
 	reg_w(gspca_dev, 0x78, 0x04);
 	reg_w(gspca_dev, 0x78, 0x05);
-
-	if (sd->autogain) {
-		sd->ag_cnt = AG_CNT_START;
-		sd->avg_lum = 0;
-	} else {
-		sd->ag_cnt = -1;
-	}
 }
 
 static void sd_stopN(struct gspca_dev *gspca_dev)
@@ -477,13 +480,20 @@ static void sd_close(struct gspca_dev *gspca_dev)
 	reg_w(gspca_dev, 0x78, 0x44); /* Bit_0=start stream, Bit_7=LED */
 }
 
-static void setautogain(struct gspca_dev *gspca_dev, int luma)
+static void do_autogain(struct gspca_dev *gspca_dev)
 {
+	struct sd *sd = (struct sd *) gspca_dev;
+	int luma;
 	int luma_mean = 128;
 	int luma_delta = 20;
 	__u8 spring = 5;
 	int Gbright;
 
+	if (!atomic_read(&sd->do_gain))
+		return;
+	atomic_set(&sd->do_gain, 0);
+
+	luma = atomic_read(&sd->avg_lum);
 	Gbright = reg_r(gspca_dev, 0x02);
 	PDEBUG(D_FRAM, "luma mean %d", luma);
 	if (luma < luma_mean - luma_delta ||
@@ -527,12 +537,13 @@ static void sd_pkt_scan(struct gspca_dev *gspca_dev,
 
 			/* start of frame */
 			if (sd->ag_cnt >= 0 && p > 28) {
-				sd->avg_lum += data[p - 23];
+				sd->lum_sum += data[p - 23];
 				if (--sd->ag_cnt < 0) {
 					sd->ag_cnt = AG_CNT_START;
-					setautogain(gspca_dev,
-						sd->avg_lum / AG_CNT_START);
-					sd->avg_lum = 0;
+					atomic_set(&sd->avg_lum,
+						sd->lum_sum / AG_CNT_START);
+					sd->lum_sum = 0;
+					atomic_set(&sd->do_gain, 1);
 				}
 			}
 
@@ -681,12 +692,8 @@ static int sd_setautogain(struct gspca_dev *gspca_dev, __s32 val)
 	struct sd *sd = (struct sd *) gspca_dev;
 
 	sd->autogain = val;
-	if (val) {
-		sd->ag_cnt = AG_CNT_START;
-		sd->avg_lum = 0;
-	} else {
-		sd->ag_cnt = -1;
-	}
+	if (gspca_dev->streaming)
+		setautogain(gspca_dev);
 	return 0;
 }
 
@@ -710,19 +717,18 @@ static struct sd_desc sd_desc = {
 	.stop0 = sd_stop0,
 	.close = sd_close,
 	.pkt_scan = sd_pkt_scan,
+	.dq_callback = do_autogain,
 };
 
 /* -- module initialisation -- */
-#define DVNM(name) .driver_info = (kernel_ulong_t) name
 static __devinitdata struct usb_device_id device_table[] = {
-	{USB_DEVICE(0x093a, 0x2600), DVNM("Typhoon")},
-	{USB_DEVICE(0x093a, 0x2601), DVNM("Philips SPC610NC")},
-	{USB_DEVICE(0x093a, 0x2603), DVNM("PAC7312")},
-	{USB_DEVICE(0x093a, 0x2608), DVNM("Trust WB-3300p")},
-	{USB_DEVICE(0x093a, 0x260e), DVNM("Gigaware VGA PC Camera")},
-			/* and also ', Trust WB-3350p, SIGMA cam 2350' */
-	{USB_DEVICE(0x093a, 0x260f), DVNM("SnakeCam")},
-	{USB_DEVICE(0x093a, 0x2621), DVNM("PAC731x")},
+	{USB_DEVICE(0x093a, 0x2600)},
+	{USB_DEVICE(0x093a, 0x2601)},
+	{USB_DEVICE(0x093a, 0x2603)},
+	{USB_DEVICE(0x093a, 0x2608)},
+	{USB_DEVICE(0x093a, 0x260e)},
+	{USB_DEVICE(0x093a, 0x260f)},
+	{USB_DEVICE(0x093a, 0x2621)},
 	{}
 };
 MODULE_DEVICE_TABLE(usb, device_table);
@@ -747,7 +753,7 @@ static int __init sd_mod_init(void)
 {
 	if (usb_register(&sd_driver) < 0)
 		return -1;
-	PDEBUG(D_PROBE, "v%s registered", version);
+	PDEBUG(D_PROBE, "registered");
 	return 0;
 }
 static void __exit sd_mod_exit(void)
diff --git a/drivers/media/video/gspca/sonixb.c b/drivers/media/video/gspca/sonixb.c
index dbeebe8625c5..11210c71f66c 100644
--- a/drivers/media/video/gspca/sonixb.c
+++ b/drivers/media/video/gspca/sonixb.c
@@ -24,9 +24,6 @@
 
 #include "gspca.h"
 
-#define DRIVER_VERSION_NUMBER	KERNEL_VERSION(2, 1, 8)
-static const char version[] = "2.1.8";
-
 MODULE_AUTHOR("Michel Xhaard <mxhaard@users.sourceforge.net>");
 MODULE_DESCRIPTION("GSPCA/SN9C102 USB Camera Driver");
 MODULE_LICENSE("GPL");
@@ -44,25 +41,29 @@ struct sd {
 	unsigned char brightness;
 	unsigned char autogain;
 	unsigned char autogain_ignore_frames;
+	unsigned char frames_to_drop;
 	unsigned char freq;		/* light freq filter setting */
-	unsigned char saturation;
-	unsigned char hue;
-	unsigned char contrast;
 
 	unsigned char fr_h_sz;		/* size of frame header */
 	char sensor;			/* Type of image sensor chip */
 #define SENSOR_HV7131R 0
 #define SENSOR_OV6650 1
 #define SENSOR_OV7630 2
-#define SENSOR_OV7630_3 3
-#define SENSOR_PAS106 4
-#define SENSOR_PAS202 5
-#define SENSOR_TAS5110 6
-#define SENSOR_TAS5130CXX 7
+#define SENSOR_PAS106 3
+#define SENSOR_PAS202 4
+#define SENSOR_TAS5110 5
+#define SENSOR_TAS5130CXX 6
 	char sensor_has_gain;
 	__u8 sensor_addr;
+	__u8 reg11;
 };
 
+/* flags used in the device id table */
+#define F_GAIN 0x01		/* has gain */
+#define F_AUTO 0x02		/* has autogain */
+#define F_SIF  0x04		/* sif or vga */
+#define F_H18  0x08		/* long (18 b) or short (12 b) frame header */
+
 #define COMP2 0x8f
 #define COMP 0xc7		/* 0x87 //0x07 */
 #define COMP1 0xc9		/* 0x89 //0x09 */
@@ -92,12 +93,6 @@ static int sd_setautogain(struct gspca_dev *gspca_dev, __s32 val);
 static int sd_getautogain(struct gspca_dev *gspca_dev, __s32 *val);
 static int sd_setfreq(struct gspca_dev *gspca_dev, __s32 val);
 static int sd_getfreq(struct gspca_dev *gspca_dev, __s32 *val);
-static int sd_setsaturation(struct gspca_dev *gspca_dev, __s32 val);
-static int sd_getsaturation(struct gspca_dev *gspca_dev, __s32 *val);
-static int sd_sethue(struct gspca_dev *gspca_dev, __s32 val);
-static int sd_gethue(struct gspca_dev *gspca_dev, __s32 *val);
-static int sd_setcontrast(struct gspca_dev *gspca_dev, __s32 val);
-static int sd_getcontrast(struct gspca_dev *gspca_dev, __s32 *val);
 
 static struct ctrl sd_ctrls[] = {
 	{
@@ -174,48 +169,6 @@ static struct ctrl sd_ctrls[] = {
 		.set = sd_setfreq,
 		.get = sd_getfreq,
 	},
-	{
-		{
-			.id      = V4L2_CID_SATURATION,
-			.type    = V4L2_CTRL_TYPE_INTEGER,
-			.name    = "Saturation",
-			.minimum = 0,
-			.maximum = 255,
-			.step    = 1,
-#define SATURATION_DEF 127
-			.default_value = SATURATION_DEF,
-		},
-		.set = sd_setsaturation,
-		.get = sd_getsaturation,
-	},
-	{
-		{
-			.id      = V4L2_CID_HUE,
-			.type    = V4L2_CTRL_TYPE_INTEGER,
-			.name    = "Hue",
-			.minimum = 0,
-			.maximum = 255,
-			.step    = 1,
-#define HUE_DEF 127
-			.default_value = HUE_DEF,
-		},
-		.set = sd_sethue,
-		.get = sd_gethue,
-	},
-	{
-		{
-			.id      = V4L2_CID_CONTRAST,
-			.type    = V4L2_CTRL_TYPE_INTEGER,
-			.name    = "Contrast",
-			.minimum = 0,
-			.maximum = 255,
-			.step    = 1,
-#define CONTRAST_DEF 127
-			.default_value = CONTRAST_DEF,
-		},
-		.set = sd_setcontrast,
-		.get = sd_getcontrast,
-	},
 };
 
 static struct v4l2_pix_format vga_mode[] = {
@@ -248,8 +201,6 @@ static struct v4l2_pix_format sif_mode[] = {
 		.priv = 0},
 };
 
-static const __u8 probe_ov7630[] = {0x08, 0x44};
-
 static const __u8 initHv7131[] = {
 	0x46, 0x77, 0x00, 0x04, 0x00, 0x00, 0x00, 0x80, 0x11, 0x00, 0x00, 0x00,
 	0x00, 0x00,
@@ -321,7 +272,7 @@ static const __u8 initOv7630_3[] = {
 	0x10, 0x20, 0x30, 0x40, 0x50, 0x60, 0x70, 0x80, /* r21 .. r28 */
 	0x90, 0xa0, 0xb0, 0xc0, 0xd0, 0xe0, 0xf0, 0xff  /* r29 .. r30 */
 };
-static const __u8 ov7630_sensor_init_com[][8] = {
+static const __u8 ov7630_sensor_init[][8] = {
 	{0xa0, 0x21, 0x12, 0x80, 0x00, 0x00, 0x00, 0x10},
 	{0xb0, 0x21, 0x01, 0x77, 0x3a, 0x00, 0x00, 0x10},
 /*	{0xd0, 0x21, 0x12, 0x7c, 0x01, 0x80, 0x34, 0x10},	   jfm */
@@ -342,17 +293,6 @@ static const __u8 ov7630_sensor_init_com[][8] = {
 	{0xa0, 0x21, 0x7d, 0xf7, 0x8e, 0x00, 0x30, 0x10},
 	{0xd0, 0x21, 0x17, 0x1c, 0xbd, 0x06, 0xf6, 0x10},
 };
-static const __u8 ov7630_sensor_init[][8] = {
-	{0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00}, /* delay 200ms */
-	{0xa0, 0x21, 0x11, 0x01, 0xbd, 0x06, 0xf6, 0x10},	/* jfm */
-	{0xa0, 0x21, 0x10, 0x57, 0xbd, 0x06, 0xf6, 0x16},
-	{0xa0, 0x21, 0x76, 0x02, 0xbd, 0x06, 0xf6, 0x16},
-	{0xa0, 0x21, 0x00, 0x10, 0xbd, 0x06, 0xf6, 0x15},	/* gain */
-};
-static const __u8 ov7630_sensor_init_3[][8] = {
-	{0xa0, 0x21, 0x2a, 0xa0, 0x00, 0x00, 0x00, 0x10},
-	{0xa0, 0x21, 0x2a, 0x80, 0x00, 0x00, 0x00, 0x10},
-};
 
 static const __u8 initPas106[] = {
 	0x04, 0x03, 0x00, 0x00, 0x00, 0x00, 0x00, 0x81, 0x40, 0x00, 0x00, 0x00,
@@ -468,7 +408,7 @@ static void reg_w(struct gspca_dev *gspca_dev,
 		  const __u8 *buffer,
 		  int len)
 {
-#ifdef CONFIG_VIDEO_ADV_DEBUG
+#ifdef GSPCA_DEBUG
 	if (len > sizeof gspca_dev->usb_buf) {
 		PDEBUG(D_ERR|D_PACK, "reg_w: buffer overflow");
 		return;
@@ -542,7 +482,6 @@ static void setbrightness(struct gspca_dev *gspca_dev)
 
 	switch (sd->sensor) {
 	case  SENSOR_OV6650:
-	case  SENSOR_OV7630_3:
 	case  SENSOR_OV7630: {
 		__u8 i2cOV[] =
 			{0xa0, 0x00, 0x06, 0x00, 0x00, 0x00, 0x00, 0x10};
@@ -635,7 +574,7 @@ static void setsensorgain(struct gspca_dev *gspca_dev)
 	case SENSOR_OV6650:
 		gain >>= 1;
 		/* fall thru */
-	case SENSOR_OV7630_3: {
+	case SENSOR_OV7630: {
 		__u8 i2c[] = {0xa0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x10};
 
 		i2c[1] = sd->sensor_addr;
@@ -690,7 +629,7 @@ static void setexposure(struct gspca_dev *gspca_dev)
 		break;
 	    }
 	case SENSOR_OV6650:
-	case SENSOR_OV7630_3: {
+	case SENSOR_OV7630: {
 		/* The ov6650 / ov7630 have 2 registers which both influence
 		   exposure, register 11, whose low nibble sets the nr off fps
 		   according to: fps = 30 / (low_nibble + 1)
@@ -705,16 +644,20 @@ static void setexposure(struct gspca_dev *gspca_dev)
 		   The code maps our 0 - 510 ms exposure ctrl to these 2
 		   registers, trying to keep fps as high as possible.
 		*/
-		__u8 i2c[] = {0xb0, 0x00, 0x10, 0x00, 0xc0, 0x00, 0x00, 0x10};
-		int reg10, reg11;
+		__u8 i2c[] = {0xb0, 0x00, 0x10, 0x00, 0x00, 0x00, 0x00, 0x10};
+		int reg10, reg11, reg10_max;
+
 		/* ov6645 datasheet says reg10_max is 9a, but that uses
 		   tline * 2 * reg10 as formula for calculating texpo, the
 		   ov6650 probably uses the same formula as the 7730 which uses
 		   tline * 4 * reg10, which explains why the reg10max we've
 		   found experimentally for the ov6650 is exactly half that of
 		   the ov6645. The ov7630 datasheet says the max is 0x41. */
-		const int reg10_max = (sd->sensor == SENSOR_OV6650)
-				? 0x4d : 0x41;
+		if (sd->sensor == SENSOR_OV6650) {
+			reg10_max = 0x4d;
+			i2c[4] = 0xc0; /* OV6650 needs non default vsync pol */
+		} else
+			reg10_max = 0x41;
 
 		reg11 = (60 * sd->exposure + 999) / 1000;
 		if (reg11 < 1)
@@ -735,20 +678,23 @@ static void setexposure(struct gspca_dev *gspca_dev)
 		else if (reg10 > reg10_max)
 			reg10 = reg10_max;
 
+		/* In 640x480, if the reg11 has less than 3, the image is
+		   unstable (not enough bandwidth). */
+		if (gspca_dev->width == 640 && reg11 < 3)
+			reg11 = 3;
+
 		/* Write reg 10 and reg11 low nibble */
 		i2c[1] = sd->sensor_addr;
 		i2c[3] = reg10;
 		i2c[4] |= reg11 - 1;
-		if (sd->sensor == SENSOR_OV7630_3) {
-			__u8 reg76 = reg10 & 0x03;
-			__u8 i2c_reg76[] = {0xa0, 0x21, 0x76, 0x00,
-					    0x00, 0x00, 0x00, 0x10};
-			reg10 >>= 2;
-			i2c_reg76[3] = reg76;
-			if (i2c_w(gspca_dev, i2c_reg76) < 0)
-				PDEBUG(D_ERR, "i2c error exposure");
-		}
-		if (i2c_w(gspca_dev, i2c) < 0)
+
+		/* If register 11 didn't change, don't change it */
+		if (sd->reg11 == reg11 )
+			i2c[0] = 0xa0;
+
+		if (i2c_w(gspca_dev, i2c) == 0)
+			sd->reg11 = reg11;
+		else
 			PDEBUG(D_ERR, "i2c error exposure");
 		break;
 	    }
@@ -761,11 +707,11 @@ static void setfreq(struct gspca_dev *gspca_dev)
 
 	switch (sd->sensor) {
 	case SENSOR_OV6650:
-	case SENSOR_OV7630_3: {
+	case SENSOR_OV7630: {
 		/* Framerate adjust register for artificial light 50 hz flicker
-		   compensation, identical to ov6630 0x2b register, see ov6630
-		   datasheet.
-		   0x4f -> (30 fps -> 25 fps), 0x00 -> no adjustment */
+		   compensation, for the ov6650 this is identical to ov6630
+		   0x2b register, see ov6630 datasheet.
+		   0x4f / 0x8a -> (30 fps -> 25 fps), 0x00 -> no adjustment */
 		__u8 i2c[] = {0xa0, 0x00, 0x2b, 0x00, 0x00, 0x00, 0x00, 0x10};
 		switch (sd->freq) {
 		default:
@@ -786,69 +732,6 @@ static void setfreq(struct gspca_dev *gspca_dev)
 	}
 }
 
-static void setsaturation(struct gspca_dev *gspca_dev)
-{
-	struct sd *sd = (struct sd *) gspca_dev;
-
-	switch (sd->sensor) {
-/*	case SENSOR_OV6650: */
-	case SENSOR_OV7630_3:
-	case SENSOR_OV7630: {
-		__u8 i2c[] = {0xa0, 0x00, 0x03, 0x00, 0x00, 0x00, 0x00, 0x10};
-		i2c[1] = sd->sensor_addr;
-		i2c[3] = sd->saturation & 0xf0;
-		if (i2c_w(gspca_dev, i2c) < 0)
-			PDEBUG(D_ERR, "i2c error setsaturation");
-		else
-			PDEBUG(D_CONF, "saturation set to: %d",
-				(int)sd->saturation);
-		break;
-	    }
-	}
-}
-
-static void sethue(struct gspca_dev *gspca_dev)
-{
-	struct sd *sd = (struct sd *) gspca_dev;
-
-	switch (sd->sensor) {
-/*	case SENSOR_OV6650: */
-	case SENSOR_OV7630_3:
-	case SENSOR_OV7630: {
-		__u8 i2c[] = {0xa0, 0x00, 0x04, 0x00, 0x00, 0x00, 0x00, 0x10};
-		i2c[1] = sd->sensor_addr;
-		i2c[3] = 0x20 | (sd->hue >> 3);
-		if (i2c_w(gspca_dev, i2c) < 0)
-			PDEBUG(D_ERR, "i2c error setsaturation");
-		else
-			PDEBUG(D_CONF, "hue set to: %d", (int)sd->hue);
-		break;
-	    }
-	}
-}
-
-static void setcontrast(struct gspca_dev *gspca_dev)
-{
-	struct sd *sd = (struct sd *) gspca_dev;
-
-	switch (sd->sensor) {
-/*	case SENSOR_OV6650: */
-	case SENSOR_OV7630_3:
-	case SENSOR_OV7630: {
-		__u8 i2c[] = {0xa0, 0x00, 0x05, 0x00, 0x00, 0x00, 0x00, 0x10};
-		i2c[1] = sd->sensor_addr;
-		i2c[3] = 0x20 | (sd->contrast >> 3);
-		if (i2c_w(gspca_dev, i2c) < 0)
-			PDEBUG(D_ERR, "i2c error setcontrast");
-		else
-			PDEBUG(D_CONF, "contrast set to: %d",
-				(int)sd->contrast);
-		break;
-	    }
-	}
-}
-
-
 static void do_autogain(struct gspca_dev *gspca_dev)
 {
 	struct sd *sd = (struct sd *) gspca_dev;
@@ -874,88 +757,32 @@ static int sd_config(struct gspca_dev *gspca_dev,
 {
 	struct sd *sd = (struct sd *) gspca_dev;
 	struct cam *cam;
-	__u16 product;
 	int sif = 0;
 
 	/* nctrls depends upon the sensor, so we use a per cam copy */
 	memcpy(&sd->sd_desc, gspca_dev->sd_desc, sizeof(struct sd_desc));
 	gspca_dev->sd_desc = &sd->sd_desc;
 
-	sd->fr_h_sz = 12;		/* default size of the frame header */
-	sd->sd_desc.nctrls = 2;		/* default nb of ctrls */
-	sd->autogain = AUTOGAIN_DEF;    /* default is autogain active */
-
-	product = id->idProduct;
-/*	switch (id->idVendor) { */
-/*	case 0x0c45:				 * Sonix */
-		switch (product) {
-		case 0x6001:			/* SN9C102 */
-		case 0x6005:			/* SN9C101 */
-		case 0x6007:			/* SN9C101 */
-			sd->sensor = SENSOR_TAS5110;
-			sd->sensor_has_gain = 1;
-			sd->sd_desc.nctrls = 4;
-			sd->sd_desc.dq_callback = do_autogain;
-			sif = 1;
-			break;
-		case 0x6009:			/* SN9C101 */
-		case 0x600d:			/* SN9C101 */
-		case 0x6029:			/* SN9C101 */
-			sd->sensor = SENSOR_PAS106;
-			sif = 1;
-			break;
-		case 0x6011:			/* SN9C101 - SN9C101G */
-			sd->sensor = SENSOR_OV6650;
-			sd->sensor_has_gain = 1;
-			sd->sensor_addr = 0x60;
-			sd->sd_desc.nctrls = 5;
-			sd->sd_desc.dq_callback = do_autogain;
-			sif = 1;
-			break;
-		case 0x6019:			/* SN9C101 */
-		case 0x602c:			/* SN9C102 */
-		case 0x602e:			/* SN9C102 */
-			sd->sensor = SENSOR_OV7630;
-			sd->sensor_addr = 0x21;
-			break;
-		case 0x60b0:			/* SN9C103 */
-			sd->sensor = SENSOR_OV7630_3;
-			sd->sensor_addr = 0x21;
-			sd->fr_h_sz = 18;	/* size of frame header */
-			sd->sensor_has_gain = 1;
-			sd->sd_desc.nctrls = 8;
-			sd->sd_desc.dq_callback = do_autogain;
-			sd->autogain = 0;
-			break;
-		case 0x6024:			/* SN9C102 */
-		case 0x6025:			/* SN9C102 */
-			sd->sensor = SENSOR_TAS5130CXX;
-			break;
-		case 0x6028:			/* SN9C102 */
-			sd->sensor = SENSOR_PAS202;
-			break;
-		case 0x602d:			/* SN9C102 */
-			sd->sensor = SENSOR_HV7131R;
-			break;
-		case 0x60af:			/* SN9C103 */
-			sd->sensor = SENSOR_PAS202;
-			sd->fr_h_sz = 18;	/* size of frame header (?) */
-			break;
-		}
-/*		break; */
-/*	} */
+	/* copy the webcam info from the device id */
+	sd->sensor = (id->driver_info >> 24) & 0xff;
+	if (id->driver_info & (F_GAIN << 16))
+		sd->sensor_has_gain = 1;
+	if (id->driver_info & (F_AUTO << 16))
+		sd->sd_desc.dq_callback = do_autogain;
+	if (id->driver_info & (F_SIF << 16))
+		sif = 1;
+	if (id->driver_info & (F_H18 << 16))
+		sd->fr_h_sz = 18;		/* size of frame header */
+	else
+		sd->fr_h_sz = 12;
+	sd->sd_desc.nctrls = (id->driver_info >> 8) & 0xff;
+	sd->sensor_addr = id->driver_info & 0xff;
 
 	cam = &gspca_dev->cam;
-	cam->dev_name = (char *) id->driver_info;
 	cam->epaddr = 0x01;
 	if (!sif) {
 		cam->cam_mode = vga_mode;
 		cam->nmodes = ARRAY_SIZE(vga_mode);
-		if (sd->sensor == SENSOR_OV7630_3) {
-			/* We only have 320x240 & 640x480 */
-			cam->cam_mode++;
-			cam->nmodes--;
-		}
 	} else {
 		cam->cam_mode = sif_mode;
 		cam->nmodes = ARRAY_SIZE(sif_mode);
@@ -963,12 +790,9 @@ static int sd_config(struct gspca_dev *gspca_dev,
 	sd->brightness = BRIGHTNESS_DEF;
 	sd->gain = GAIN_DEF;
 	sd->exposure = EXPOSURE_DEF;
+	sd->autogain = AUTOGAIN_DEF;
 	sd->freq = FREQ_DEF;
-	sd->contrast = CONTRAST_DEF;
-	sd->saturation = SATURATION_DEF;
-	sd->hue = HUE_DEF;
-	if (sd->sensor == SENSOR_OV7630_3)	/* jfm: from win trace */
-		reg_w(gspca_dev, 0x01, probe_ov7630, sizeof probe_ov7630);
+
 	return 0;
 }
 
@@ -1002,9 +826,8 @@ static void pas106_i2cinit(struct gspca_dev *gspca_dev)
 static void sd_start(struct gspca_dev *gspca_dev)
 {
 	struct sd *sd = (struct sd *) gspca_dev;
-	int mode, l;
+	int mode, l = 0x1f;
 	const __u8 *sn9c10x;
-	__u8 reg01, reg17;
 	__u8 reg17_19[3];
 
 	mode = gspca_dev->cam.cam_mode[(int) gspca_dev->curr_mode].priv;
@@ -1022,13 +845,11 @@ static void sd_start(struct gspca_dev *gspca_dev)
 		reg17_19[2] = 0x20;
 		break;
 	case SENSOR_OV7630:
-		sn9c10x = initOv7630;
-		reg17_19[0] = 0x68;
-		reg17_19[1] = (mode << 4) | COMP2;
-		reg17_19[2] = MCK_INIT1;
-		break;
-	case SENSOR_OV7630_3:
-		sn9c10x = initOv7630_3;
+		if (sd->fr_h_sz == 18) { /* SN9C103 */
+			sn9c10x = initOv7630_3;
+			l = sizeof initOv7630_3;
+		} else
+			sn9c10x = initOv7630;
 		reg17_19[0] = 0x68;
 		reg17_19[1] = (mode << 4) | COMP2;
 		reg17_19[2] = MCK_INIT1;
@@ -1059,30 +880,11 @@ static void sd_start(struct gspca_dev *gspca_dev)
 		reg17_19[2] = mode ? 0x23 : 0x43;
 		break;
 	}
-	switch (sd->sensor) {
-	case SENSOR_OV7630:
-		reg01 = 0x06;
-		reg17 = 0x29;
-		l = sizeof initOv7630;
-		break;
-	case SENSOR_OV7630_3:
-		reg01 = 0x44;
-		reg17 = 0x68;
-		l = sizeof initOv7630_3;
-		break;
-	default:
-		reg01 = sn9c10x[0];
-		reg17 = sn9c10x[0x17 - 1];
-		l = 0x1f;
-		break;
-	}
 
 	/* reg 0x01 bit 2 video transfert on */
-	reg_w(gspca_dev, 0x01, &reg01, 1);
+	reg_w(gspca_dev, 0x01, &sn9c10x[0x01 - 1], 1);
 	/* reg 0x17 SensorClk enable inv Clk 0x60 */
-	reg_w(gspca_dev, 0x17, &reg17, 1);
-/*fixme: for ov7630 102
-	reg_w(gspca_dev, 0x01, {0x06, sn9c10x[1]}, 2); */
+	reg_w(gspca_dev, 0x17, &sn9c10x[0x17 - 1], 1);
 	/* Set the registers from the template */
 	reg_w_big(gspca_dev, 0x01, sn9c10x, l);
 	switch (sd->sensor) {
@@ -1095,17 +897,13 @@ static void sd_start(struct gspca_dev *gspca_dev)
 				sizeof ov6650_sensor_init);
 		break;
 	case SENSOR_OV7630:
-		i2c_w_vector(gspca_dev, ov7630_sensor_init_com,
-				sizeof ov7630_sensor_init_com);
-		msleep(200);
 		i2c_w_vector(gspca_dev, ov7630_sensor_init,
 				sizeof ov7630_sensor_init);
-		break;
-	case SENSOR_OV7630_3:
-		i2c_w_vector(gspca_dev, ov7630_sensor_init_com,
-				sizeof ov7630_sensor_init_com);
-		msleep(200);
-		i2c_w(gspca_dev, ov7630_sensor_init_3[mode]);
+		if (sd->fr_h_sz == 18) { /* SN9C103 */
+			const __u8 i2c[] = { 0xa0, 0x21, 0x13, 0x80, 0x00,
+						0x00, 0x00, 0x10 };
+			i2c_w(gspca_dev, i2c);
+		}
 		break;
 	case SENSOR_PAS106:
 		pas106_i2cinit(gspca_dev);
@@ -1145,14 +943,14 @@ static void sd_start(struct gspca_dev *gspca_dev)
 	reg_w(gspca_dev, 0x18, &reg17_19[1], 2);
 	msleep(20);
 
+	sd->reg11 = -1;
+
 	setgain(gspca_dev);
 	setbrightness(gspca_dev);
 	setexposure(gspca_dev);
 	setfreq(gspca_dev);
-	setsaturation(gspca_dev);
-	sethue(gspca_dev);
-	setcontrast(gspca_dev);
 
+	sd->frames_to_drop = 0;
 	sd->autogain_ignore_frames = 0;
 	atomic_set(&sd->avg_lum, -1);
 }
@@ -1198,21 +996,31 @@ static void sd_pkt_scan(struct gspca_dev *gspca_dev,
 			    && data[3 + i] == 0xc4
 			    && data[4 + i] == 0xc4
 			    && data[5 + i] == 0x96) {	/* start of frame */
-				frame = gspca_frame_add(gspca_dev, LAST_PACKET,
-							frame, data, 0);
+				int lum = -1;
+				int pkt_type = LAST_PACKET;
+
 				if (len - i < sd->fr_h_sz) {
-					atomic_set(&sd->avg_lum, -1);
 					PDEBUG(D_STREAM, "packet too short to"
 						" get avg brightness");
 				} else if (sd->fr_h_sz == 12) {
-					atomic_set(&sd->avg_lum,
-						data[i + 8] +
-							(data[i + 9] << 8));
+					lum = data[i + 8] + (data[i + 9] << 8);
 				} else {
-					atomic_set(&sd->avg_lum,
-						data[i + 9] +
-							(data[i + 10] << 8));
+					lum = data[i + 9] +
+						(data[i + 10] << 8);
+				}
+				if (lum == 0) {
+					lum = -1;
+					sd->frames_to_drop = 2;
+				}
+				atomic_set(&sd->avg_lum, lum);
+
+				if (sd->frames_to_drop) {
+					sd->frames_to_drop--;
+					pkt_type = DISCARD_PACKET;
 				}
+
+				frame = gspca_frame_add(gspca_dev, pkt_type,
+							frame, data, 0);
 				data += i + sd->fr_h_sz;
 				len -= i + sd->fr_h_sz;
 				gspca_frame_add(gspca_dev, FIRST_PACKET,
@@ -1327,60 +1135,6 @@ static int sd_getfreq(struct gspca_dev *gspca_dev, __s32 *val)
 	return 0;
 }
 
-static int sd_setsaturation(struct gspca_dev *gspca_dev, __s32 val)
-{
-	struct sd *sd = (struct sd *) gspca_dev;
-
-	sd->saturation = val;
-	if (gspca_dev->streaming)
-		setsaturation(gspca_dev);
-	return 0;
-}
-
-static int sd_getsaturation(struct gspca_dev *gspca_dev, __s32 *val)
-{
-	struct sd *sd = (struct sd *) gspca_dev;
-
-	*val = sd->saturation;
-	return 0;
-}
-
-static int sd_sethue(struct gspca_dev *gspca_dev, __s32 val)
-{
-	struct sd *sd = (struct sd *) gspca_dev;
-
-	sd->hue = val;
-	if (gspca_dev->streaming)
-		sethue(gspca_dev);
-	return 0;
-}
-
-static int sd_gethue(struct gspca_dev *gspca_dev, __s32 *val)
-{
-	struct sd *sd = (struct sd *) gspca_dev;
-
-	*val = sd->hue;
-	return 0;
-}
-
-static int sd_setcontrast(struct gspca_dev *gspca_dev, __s32 val)
-{
-	struct sd *sd = (struct sd *) gspca_dev;
-
-	sd->contrast = val;
-	if (gspca_dev->streaming)
-		setcontrast(gspca_dev);
-	return 0;
-}
-
-static int sd_getcontrast(struct gspca_dev *gspca_dev, __s32 *val)
-{
-	struct sd *sd = (struct sd *) gspca_dev;
-
-	*val = sd->contrast;
-	return 0;
-}
-
 static int sd_querymenu(struct gspca_dev *gspca_dev,
 			struct v4l2_querymenu *menu)
 {
@@ -1418,27 +1172,47 @@ static const struct sd_desc sd_desc = {
 };
 
 /* -- module initialisation -- */
-#define DVNM(name) .driver_info = (kernel_ulong_t) name
+#define SFCI(sensor, flags, nctrls, i2c_addr) \
+	.driver_info = (SENSOR_ ## sensor << 24) \
+			| ((flags) << 16) \
+			| ((nctrls) << 8) \
+			| (i2c_addr)
 static __devinitdata struct usb_device_id device_table[] = {
 #ifndef CONFIG_USB_SN9C102
-	{USB_DEVICE(0x0c45, 0x6001), DVNM("Genius VideoCAM NB")},
-	{USB_DEVICE(0x0c45, 0x6005), DVNM("Sweex Tas5110")},
-	{USB_DEVICE(0x0c45, 0x6007), DVNM("Sonix sn9c101 + Tas5110D")},
-	{USB_DEVICE(0x0c45, 0x6009), DVNM("spcaCam@120")},
-	{USB_DEVICE(0x0c45, 0x600d), DVNM("spcaCam@120")},
+	{USB_DEVICE(0x0c45, 0x6001),			/* SN9C102 */
+			SFCI(TAS5110, F_GAIN|F_AUTO|F_SIF, 4, 0)},
+	{USB_DEVICE(0x0c45, 0x6005),			/* SN9C101 */
+			SFCI(TAS5110, F_GAIN|F_AUTO|F_SIF, 4, 0)},
+	{USB_DEVICE(0x0c45, 0x6007),			/* SN9C101 */
+			SFCI(TAS5110, F_GAIN|F_AUTO|F_SIF, 4, 0)},
+	{USB_DEVICE(0x0c45, 0x6009),			/* SN9C101 */
+			SFCI(PAS106, F_SIF, 2, 0)},
+	{USB_DEVICE(0x0c45, 0x600d),			/* SN9C101 */
+			SFCI(PAS106, F_SIF, 2, 0)},
 #endif
-	{USB_DEVICE(0x0c45, 0x6011), DVNM("MAX Webcam Microdia")},
+	{USB_DEVICE(0x0c45, 0x6011),		/* SN9C101 - SN9C101G */
+			SFCI(OV6650, F_GAIN|F_AUTO|F_SIF, 5, 0x60)},
 #ifndef CONFIG_USB_SN9C102
-	{USB_DEVICE(0x0c45, 0x6019), DVNM("Generic Sonix OV7630")},
-	{USB_DEVICE(0x0c45, 0x6024), DVNM("Generic Sonix Tas5130c")},
-	{USB_DEVICE(0x0c45, 0x6025), DVNM("Xcam Shanga")},
-	{USB_DEVICE(0x0c45, 0x6028), DVNM("Sonix Btc Pc380")},
-	{USB_DEVICE(0x0c45, 0x6029), DVNM("spcaCam@150")},
-	{USB_DEVICE(0x0c45, 0x602c), DVNM("Generic Sonix OV7630")},
-	{USB_DEVICE(0x0c45, 0x602d), DVNM("LIC-200 LG")},
-	{USB_DEVICE(0x0c45, 0x602e), DVNM("Genius VideoCam Messenger")},
-	{USB_DEVICE(0x0c45, 0x60af), DVNM("Trust WB3100P")},
-	{USB_DEVICE(0x0c45, 0x60b0), DVNM("Genius VideoCam Look")},
+	{USB_DEVICE(0x0c45, 0x6019),			/* SN9C101 */
+			SFCI(OV7630, F_GAIN|F_AUTO, 5, 0x21)},
+	{USB_DEVICE(0x0c45, 0x6024),			/* SN9C102 */
+			SFCI(TAS5130CXX, 0, 2, 0)},
+	{USB_DEVICE(0x0c45, 0x6025),			/* SN9C102 */
+			SFCI(TAS5130CXX, 0, 2, 0)},
+	{USB_DEVICE(0x0c45, 0x6028),			/* SN9C102 */
+			SFCI(PAS202, 0, 2, 0)},
+	{USB_DEVICE(0x0c45, 0x6029),			/* SN9C101 */
+			SFCI(PAS106, F_SIF, 2, 0)},
+	{USB_DEVICE(0x0c45, 0x602c),			/* SN9C102 */
+			SFCI(OV7630, F_GAIN|F_AUTO, 5, 0x21)},
+	{USB_DEVICE(0x0c45, 0x602d),			/* SN9C102 */
+			SFCI(HV7131R, 0, 2, 0)},
+	{USB_DEVICE(0x0c45, 0x602e),			/* SN9C102 */
+			SFCI(OV7630, F_GAIN|F_AUTO, 5, 0x21)},
+	{USB_DEVICE(0x0c45, 0x60af),			/* SN9C103 */
+			SFCI(PAS202, F_H18, 2, 0)},
+	{USB_DEVICE(0x0c45, 0x60b0),			/* SN9C103 */
+			SFCI(OV7630, F_GAIN|F_AUTO|F_H18, 5, 0x21)},
 #endif
 	{}
 };
@@ -1464,7 +1238,7 @@ static int __init sd_mod_init(void)
 {
 	if (usb_register(&sd_driver) < 0)
 		return -1;
-	PDEBUG(D_PROBE, "v%s registered", version);
+	PDEBUG(D_PROBE, "registered");
 	return 0;
 }
 static void __exit sd_mod_exit(void)
diff --git a/drivers/media/video/gspca/sonixj.c b/drivers/media/video/gspca/sonixj.c
index 3e68b9926956..245a30ec5fb1 100644
--- a/drivers/media/video/gspca/sonixj.c
+++ b/drivers/media/video/gspca/sonixj.c
@@ -24,9 +24,6 @@
 #include "gspca.h"
 #include "jpeg.h"
 
-#define DRIVER_VERSION_NUMBER	KERNEL_VERSION(2, 1, 7)
-static const char version[] = "2.1.7";
-
 MODULE_AUTHOR("Michel Xhaard <mxhaard@users.sourceforge.net>");
 MODULE_DESCRIPTION("GSPCA/SONIX JPEG USB Camera Driver");
 MODULE_LICENSE("GPL");
@@ -35,7 +32,7 @@ MODULE_LICENSE("GPL");
 struct sd {
 	struct gspca_dev gspca_dev;	/* !! must be the first item */
 
-	int avg_lum;
+	atomic_t avg_lum;
 	unsigned int exposure;
 
 	unsigned short brightness;
@@ -151,55 +148,58 @@ static struct v4l2_pix_format vga_mode[] = {
 
 /*Data from sn9c102p+hv71331r */
 static const __u8 sn_hv7131[] = {
-/*	reg0  reg1  reg2  reg3  reg4  reg5  reg6  reg7  reg8  reg9 */
-	0x00, 0x03, 0x64, 0x00, 0x1A, 0x20, 0x20, 0x20, 0xA1, 0x11,
-/*	rega  regb  regc  regd  rege  regf  reg10 reg11 */
-	0x02, 0x09, 0x00, 0x00, 0x00, 0x10, 0x03, 0x00,		/* 00 */
-/*	reg12 reg13 reg14 reg15 reg16 reg17 reg18 reg19 reg1a reg1b */
-	0x00, 0x01, 0x03, 0x28, 0x1e, 0x41, 0x0a, 0x00, 0x00, 0x00,
-/*	reg1c reg1d reg1e reg1f reg20 reg21 reg22 reg23 */
-	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00
+/*	reg0	reg1	reg2	reg3	reg4	reg5	reg6	reg7 */
+	0x00,	0x03,	0x64,	0x00,	0x1a,	0x20,	0x20,	0x20,
+/*	reg8	reg9	rega	regb	regc	regd	rege	regf */
+	0xa1,	0x11,	0x02,	0x09,	0x00,	0x00,	0x00,	0x10,
+/*	reg10	reg11	reg12	reg13	reg14	reg15	reg16	reg17 */
+	0x03,	0x00,	0x00,	0x01,	0x03,	0x28,	0x1e,	0x41,
+/*	reg18	reg19	reg1a	reg1b	reg1c	reg1d	reg1e	reg1f */
+	0x0a,	0x00,	0x00,	0x00,	0x00,	0x00,	0x00,	0x00
 };
 
 static const __u8 sn_mi0360[] = {
-/*	reg0  reg1  reg2  reg3  reg4  reg5  reg6  reg7  reg8  reg9 */
-	0x00, 0x61, 0x44, 0x00, 0x1a, 0x20, 0x20, 0x20, 0xb1, 0x5d,
-/*	rega  regb  regc  regd  rege  regf  reg10 reg11 */
-	0x07, 0x00, 0x00, 0x00, 0x00, 0x10, 0x03, 0x00,
-/*	reg12 reg13 reg14 reg15 reg16 reg17 reg18 reg19 reg1a reg1b */
-	0x00, 0x02, 0x0a, 0x28, 0x1e, 0x61, 0x06, 0x00, 0x00, 0x00,
-/*	reg1c reg1d reg1e reg1f reg20 reg21 reg22 reg23 */
-	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00
+/*	reg0	reg1	reg2	reg3	reg4	reg5	reg6	reg7 */
+	0x00,	0x61,	0x44,	0x00,	0x1a,	0x20,	0x20,	0x20,
+/*	reg8	reg9	rega	regb	regc	regd	rege	regf */
+	0xb1,	0x5d,	0x07,	0x00,	0x00,	0x00,	0x00,	0x10,
+/*	reg10	reg11	reg12	reg13	reg14	reg15	reg16	reg17 */
+	0x03,	0x00,	0x00,	0x02,	0x0a,	0x28,	0x1e,	0x61,
+/*	reg18	reg19	reg1a	reg1b	reg1c	reg1d	reg1e	reg1f */
+	0x06,	0x00,	0x00,	0x00,	0x00,	0x00,	0x00,	0x00
 };
 
 static const __u8 sn_mo4000[] = {
-/*	reg0	reg1	reg2	reg3	reg4	reg5	reg6	reg7	reg8 */
-	0x12,	0x23,	0x60,	0x00,	0x1A,	0x00,	0x20,	0x18,	0x81,
-/*	reg9	rega	regb	regc	regd	rege	regf	reg10	reg11*/
-	0x21,	0x00,	0x00,	0x00,	0x00,	0x00,	0x00,	0x03,	0x00,
-/*	reg12	reg13	reg14	reg15	reg16	reg17	reg18	reg19	reg1a*/
-	0x0b,	0x0f,	0x14,	0x28,	0x1e,	0x40,	0x08,	0x00,	0x00,
-/*	reg1b	reg1c	reg1d	reg1e	reg1f	reg20	reg21	reg22	reg23*/
-	0x00,	0x00,	0x00,	0x00,	0x00,	0x08,	0x25,	0x39,	0x4b,
-	0x5c,	0x6b,	0x79,	0x87,	0x95,	0xa2,	0xaf,	0xbb,	0xc7,
-	0xd3,	0xdf,	0xea,	0xf5
+/*	reg0	reg1	reg2	reg3	reg4	reg5	reg6	reg7 */
+	0x12,	0x23,	0x60,	0x00,	0x1a,	0x00,	0x20,	0x18,
+/*	reg8	reg9	rega	regb	regc	regd	rege	regf */
+	0x81,	0x21,	0x00,	0x00,	0x00,	0x00,	0x00,	0x00,
+/*	reg10	reg11	reg12	reg13	reg14	reg15	reg16	reg17 */
+	0x03,	 0x00,	0x0b,	0x0f,	0x14,	0x28,	0x1e,	0x40,
+/*	reg18	reg19	reg1a	reg1b	reg1c	reg1d	reg1e	reg1f */
+	0x08,	0x00,	0x00,	0x00,	0x00,	0x00,	0x00,	0x00
 };
 
 static const __u8 sn_ov7648[] = {
-	0x00, 0x21, 0x62, 0x00, 0x1a, 0x20, 0x20, 0x20, 0xA1, 0x6E, 0x18, 0x65,
-	0x00, 0x00, 0x00, 0x10, 0x03, 0x00, 0x00, 0x06, 0x06, 0x28, 0x1E, 0x82,
-	0x07, 0x00, 0x00, 0x00, 0x00, 0x00
+/*	reg0	reg1	reg2	reg3	reg4	reg5	reg6	reg7 */
+	0x00,	0x21,	0x62,	0x00,	0x1a,	0x20,	0x20,	0x20,
+/*	reg8	reg9	rega	regb	regc	regd	rege	regf */
+	0xa1,	0x6e,	0x18,	0x65,	0x00,	0x00,	0x00,	0x10,
+/*	reg10	reg11	reg12	reg13	reg14	reg15	reg16	reg17 */
+	0x03,	0x00,	0x00,	0x06,	0x06,	0x28,	0x1e,	0x82,
+/*	reg18	reg19	reg1a	reg1b	reg1c	reg1d	reg1e	reg1f */
+	0x07,	0x00,	0x00,	0x00,	0x00,	0x00
 };
 
 static const __u8 sn_ov7660[]	= {
-/*	reg0	reg1	reg2	reg3	reg4	reg5	reg6	reg7	reg8 */
-	0x00,	0x61,	0x40,	0x00,	0x1a,	0x00,	0x00,	0x00,	0x81,
-/* 	reg9	rega	regb	regc	regd	rege	regf	reg10	reg11*/
-	0x21,	0x00,	0x00,	0x00,	0x00,	0x00,	0x00,	0x03,	0x00,
-/*	reg12	reg13	reg14	reg15	reg16	reg17	reg18	reg19	reg1a*/
-	0x01,	0x01,	0x14,	0x28,	0x1e,	0x00,	0x07,	0x00,	0x00,
-/*	reg1b	reg1c	reg1d	reg1e	reg1f	reg20	reg21	reg22	reg23*/
-	0x00,	0x00,	0x00,	0x00,	0x00,	0x00,	0x00,	0x00,	0x00
+/*	reg0	reg1	reg2	reg3	reg4	reg5	reg6	reg7 */
+	0x00,	0x61,	0x40,	0x00,	0x1a,	0x20,	0x20,	0x20,
+/*	reg8	reg9	rega	regb	regc	regd	rege	regf */
+	0x81,	0x21,	0x07,	0x00,	0x00,	0x00,	0x00,	0x10,
+/*	reg10	reg11	reg12	reg13	reg14	reg15	reg16	reg17 */
+	0x03,	0x00,	0x01,	0x01,	0x08,	0x28,	0x1e,	0x20,
+/*	reg18	reg19	reg1a	reg1b	reg1c	reg1d	reg1e	reg1f */
+	0x07,	0x00,	0x00,	0x00,	0x00,	0x00,	0x00,	0x00,
 };
 
 /* sequence specific to the sensors - !! index = SENSOR_xxx */
@@ -215,10 +215,6 @@ static const __u8 regsn20[] = {
 	0x00, 0x2d, 0x46, 0x5a, 0x6c, 0x7c, 0x8b, 0x99,
 	0xa6, 0xb2, 0xbf, 0xca, 0xd5, 0xe0, 0xeb, 0xf5, 0xff
 };
-static const __u8 regsn20_sn9c120[] = {
-	0x00, 0x25, 0x3c, 0x50, 0x62, 0x72, 0x81, 0x90,
-	0x9e, 0xab, 0xb8, 0xc5, 0xd1, 0xdd, 0xe9, 0xf4, 0xff
-};
 static const __u8 regsn20_sn9c325[] = {
 	0x0a, 0x3a, 0x56, 0x6c, 0x7e, 0x8d, 0x9a, 0xa4,
 	0xaf, 0xbb, 0xc5, 0xcd, 0xd5, 0xde, 0xe8, 0xed, 0xf5
@@ -230,21 +226,6 @@ static const __u8 reg84[] = {
 /*	0x00, 0x00, 0x00, 0x00, 0x00 */
 	0xf7, 0x0f, 0x0a, 0x00, 0x00
 };
-static const __u8 reg84_sn9c120_1[] = {
-	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-	0x00, 0x00, 0x0c, 0x00, 0x00
-};
-static const __u8 reg84_sn9c120_2[] = {
-	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-	0x00, 0x00, 0x0c, 0x02, 0x3b
-};
-static const __u8 reg84_sn9c120_3[] = {
-	0x14, 0x00, 0x27, 0x00, 0x08, 0x00, 0xeb, 0x0f,
-	0xd5, 0x0f, 0x42, 0x00, 0x41, 0x00, 0xca, 0x0f,
-	0xf5, 0x0f, 0x0c, 0x02, 0x3b
-};
 static const __u8 reg84_sn9c325[] = {
 	0x14, 0x00, 0x27, 0x00, 0x07, 0x00, 0xe4, 0x0f,
 	0xd3, 0x0f, 0x4b, 0x00, 0x48, 0x00, 0xc0, 0x0f,
@@ -361,18 +342,17 @@ static const __u8 mo4000_sensor_init[][8] = {
 };
 static const __u8 ov7660_sensor_init[][8] = {
 	{0xa1, 0x21, 0x12, 0x80, 0x00, 0x00, 0x00, 0x10}, /* reset SCCB */
+/*		(delay 20ms) */
 	{0xa1, 0x21, 0x12, 0x05, 0x00, 0x00, 0x00, 0x10},
-						/* Outformat ?? rawRGB */
+						/* Outformat = rawRGB */
 	{0xa1, 0x21, 0x13, 0xb8, 0x00, 0x00, 0x00, 0x10}, /* init COM8 */
-	{0xd1, 0x21, 0x00, 0x01, 0x74, 0x92, 0x00, 0x10},
-/*	{0xd1, 0x21, 0x00, 0x01, 0x74, 0x74, 0x00, 0x10}, */
+	{0xd1, 0x21, 0x00, 0x01, 0x74, 0x74, 0x00, 0x10},
 						/* GAIN BLUE RED VREF */
 	{0xd1, 0x21, 0x04, 0x00, 0x7d, 0x62, 0x00, 0x10},
 						/* COM 1 BAVE GEAVE AECHH */
 	{0xb1, 0x21, 0x08, 0x83, 0x01, 0x00, 0x00, 0x10}, /* RAVE COM2 */
 	{0xd1, 0x21, 0x0c, 0x00, 0x08, 0x04, 0x4f, 0x10}, /* COM 3 4 5 6 */
-	{0xd1, 0x21, 0x10, 0x7f, 0x40, 0x05, 0xf8, 0x10},
-/*	{0xd1, 0x21, 0x10, 0x7f, 0x40, 0x05, 0xff, 0x10}, */
+	{0xd1, 0x21, 0x10, 0x7f, 0x40, 0x05, 0xff, 0x10},
 						/* AECH CLKRC COM7 COM8 */
 	{0xc1, 0x21, 0x14, 0x2c, 0x00, 0x02, 0x00, 0x10}, /* COM9 COM10 */
 	{0xd1, 0x21, 0x17, 0x10, 0x60, 0x02, 0x7b, 0x10},
@@ -381,8 +361,8 @@ static const __u8 ov7660_sensor_init[][8] = {
 	{0xb1, 0x21, 0x1e, 0x01, 0x0e, 0x00, 0x00, 0x10}, /* MVFP LAEC */
 	{0xd1, 0x21, 0x20, 0x07, 0x07, 0x07, 0x07, 0x10},
 					/* BOS GBOS GROS ROS (BGGR offset) */
-	{0xd1, 0x21, 0x24, 0x68, 0x58, 0xd4, 0x80, 0x10},
-/*	{0xd1, 0x21, 0x24, 0x78, 0x68, 0xd4, 0x80, 0x10}, */
+/*	{0xd1, 0x21, 0x24, 0x68, 0x58, 0xd4, 0x80, 0x10}, */
+	{0xd1, 0x21, 0x24, 0x78, 0x68, 0xd4, 0x80, 0x10},
 						/* AEW AEB VPT BBIAS */
 	{0xd1, 0x21, 0x28, 0x80, 0x30, 0x00, 0x00, 0x10},
 						/* GbBIAS RSVD EXHCH EXHCL */
@@ -409,9 +389,9 @@ static const __u8 ov7660_sensor_init[][8] = {
 	{0xd1, 0x21, 0x62, 0x00, 0x00, 0x50, 0x30, 0x10},
 						/* LCC1 LCC2 LCC3 LCC4 */
 	{0xa1, 0x21, 0x66, 0x00, 0x00, 0x00, 0x00, 0x10}, /* LCC5 */
-	{0xd1, 0x21, 0x67, 0x80, 0x7a, 0x90, 0x80, 0x10},
+	{0xd1, 0x21, 0x67, 0x80, 0x7a, 0x90, 0x80, 0x10}, /* MANU */
 	{0xa1, 0x21, 0x6b, 0x0a, 0x00, 0x00, 0x00, 0x10},
-					/* band gap reference [0..3] DBLV */
+					/* band gap reference [0:3] DBLV */
 	{0xd1, 0x21, 0x6c, 0x30, 0x48, 0x80, 0x74, 0x10}, /* gamma curve */
 	{0xd1, 0x21, 0x70, 0x64, 0x60, 0x5c, 0x58, 0x10}, /* gamma curve */
 	{0xd1, 0x21, 0x74, 0x54, 0x4c, 0x40, 0x38, 0x10}, /* gamma curve */
@@ -421,37 +401,35 @@ static const __u8 ov7660_sensor_init[][8] = {
 	{0xd1, 0x21, 0x84, 0x6e, 0x77, 0x87, 0x95, 0x10}, /* gamma curve */
 	{0xc1, 0x21, 0x88, 0xaf, 0xc7, 0xdf, 0x00, 0x10}, /* gamma curve */
 	{0xc1, 0x21, 0x8b, 0x99, 0x99, 0xcf, 0x00, 0x10}, /* reserved */
-	{0xb1, 0x21, 0x92, 0x00, 0x00, 0x00, 0x00, 0x10},
+	{0xb1, 0x21, 0x92, 0x00, 0x00, 0x00, 0x00, 0x10}, /* DM_LNL/H */
 /****** (some exchanges in the win trace) ******/
-	{0xa1, 0x21, 0x1e, 0x01, 0x00, 0x00, 0x00, 0x10},
+	{0xa1, 0x21, 0x1e, 0x01, 0x00, 0x00, 0x00, 0x10}, /* MVFP */
 						/* bits[3..0]reserved */
 	{0xa1, 0x21, 0x1e, 0x01, 0x00, 0x00, 0x00, 0x10},
 	{0xa1, 0x21, 0x03, 0x00, 0x00, 0x00, 0x00, 0x10},
 						/* VREF vertical frame ctrl */
 	{0xa1, 0x21, 0x03, 0x00, 0x00, 0x00, 0x00, 0x10},
-	{0xa1, 0x21, 0x10, 0x20, 0x00, 0x00, 0x00, 0x10}, /* 0x20 */
-	{0xa1, 0x21, 0x2d, 0x00, 0x00, 0x00, 0x00, 0x10},
-	{0xa1, 0x21, 0x2e, 0x00, 0x00, 0x00, 0x00, 0x10},
-/*	{0xa1, 0x21, 0x00, 0x1f, 0x00, 0x00, 0x00, 0x10}, */
-	{0xa1, 0x21, 0x00, 0x0a, 0x00, 0x00, 0x00, 0x10},
-	{0xb1, 0x21, 0x01, 0x78, 0x78, 0x00, 0x00, 0x10},
+	{0xa1, 0x21, 0x10, 0x20, 0x00, 0x00, 0x00, 0x10}, /* AECH 0x20 */
+	{0xa1, 0x21, 0x2d, 0x00, 0x00, 0x00, 0x00, 0x10}, /* ADVFL */
+	{0xa1, 0x21, 0x2e, 0x00, 0x00, 0x00, 0x00, 0x10}, /* ADVFH */
+	{0xa1, 0x21, 0x00, 0x1f, 0x00, 0x00, 0x00, 0x10}, /* GAIN */
+/*	{0xb1, 0x21, 0x01, 0x78, 0x78, 0x00, 0x00, 0x10}, * BLUE */
 /****** (some exchanges in the win trace) ******/
 	{0xa1, 0x21, 0x93, 0x00, 0x00, 0x00, 0x00, 0x10},/* dummy line hight */
-	{0xa1, 0x21, 0x92, 0x25, 0x00, 0x00, 0x00, 0x10},/* dummy line low */
-	{0xa1, 0x21, 0x2a, 0x00, 0x00, 0x00, 0x00, 0x10},
-	{0xa1, 0x21, 0x2b, 0x00, 0x00, 0x00, 0x00, 0x10},
-	{0xa1, 0x21, 0x02, 0x90, 0x00, 0x00, 0x00, 0x10},
+	{0xa1, 0x21, 0x92, 0x25, 0x00, 0x00, 0x00, 0x10}, /* dummy line low */
+	{0xa1, 0x21, 0x2a, 0x00, 0x00, 0x00, 0x00, 0x10}, /* EXHCH */
+	{0xa1, 0x21, 0x2b, 0x00, 0x00, 0x00, 0x00, 0x10}, /* EXHCL */
+/*	{0xa1, 0x21, 0x02, 0x90, 0x00, 0x00, 0x00, 0x10},  * RED */
 /****** (some exchanges in the win trace) ******/
-/**********startsensor KO if changed !!****/
+/******!! startsensor KO if changed !!****/
 	{0xa1, 0x21, 0x93, 0x01, 0x00, 0x00, 0x00, 0x10},
 	{0xa1, 0x21, 0x92, 0xff, 0x00, 0x00, 0x00, 0x10},
 	{0xa1, 0x21, 0x2a, 0x00, 0x00, 0x00, 0x00, 0x10},
 	{0xa1, 0x21, 0x2b, 0xc3, 0x00, 0x00, 0x00, 0x10},
-/* here may start the isoc exchanges */
 	{}
 };
-/* reg0x04		reg0x07		reg 0x10 */
-/* expo  = (COM1 & 0x02) | (AECHH & 0x2f <<10) [ (AECh << 2) */
+/*	  reg 0x04	  reg 0x07		   reg 0x10 */
+/* expo = (COM1 & 0x02) | ((AECHH & 0x2f) << 10) | (AECh << 2) */
 
 static const __u8 ov7648_sensor_init[][8] = {
 	{0xC1, 0x00, 0x01, 0x00, 0x00, 0x00, 0x01, 0x00},
@@ -539,13 +517,31 @@ static void reg_r(struct gspca_dev *gspca_dev,
 			value, 0,
 			gspca_dev->usb_buf, len,
 			500);
+	PDEBUG(D_USBI, "reg_r [%02x] -> %02x", value, gspca_dev->usb_buf[0]);
 }
 
+static void reg_w1(struct gspca_dev *gspca_dev,
+		   __u16 value,
+		   __u8 data)
+{
+	PDEBUG(D_USBO, "reg_w1 [%02x] = %02x", value, data);
+	gspca_dev->usb_buf[0] = data;
+	usb_control_msg(gspca_dev->dev,
+			usb_sndctrlpipe(gspca_dev->dev, 0),
+			0x08,
+			USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_INTERFACE,
+			value,
+			0,
+			gspca_dev->usb_buf, 1,
+			500);
+}
 static void reg_w(struct gspca_dev *gspca_dev,
 			  __u16 value,
 			  const __u8 *buffer,
 			  int len)
 {
+	PDEBUG(D_USBO, "reg_w [%02x] = %02x %02x ..",
+		value, buffer[0], buffer[1]);
 	if (len <= sizeof gspca_dev->usb_buf) {
 		memcpy(gspca_dev->usb_buf, buffer, len);
 		usb_control_msg(gspca_dev->dev,
@@ -571,31 +567,42 @@ static void reg_w(struct gspca_dev *gspca_dev,
 	}
 }
 
-/* I2C write 2 bytes */
-static void i2c_w2(struct gspca_dev *gspca_dev,
-		   const __u8 *buffer)
+/* I2C write 1 byte */
+static void i2c_w1(struct gspca_dev *gspca_dev, __u8 reg, __u8 val)
 {
 	struct sd *sd = (struct sd *) gspca_dev;
-	__u8 mode[8];
 
-	/* is i2c ready */
-	mode[0] = 0x81 | (2 << 4);
-	mode[1] = sd->i2c_base;
-	mode[2] = buffer[0];
-	mode[3] = buffer[1];
-	mode[4] = 0;
-	mode[5] = 0;
-	mode[6] = 0;
-	mode[7] = 0x10;
-	reg_w(gspca_dev, 0x08, mode, 8);
+	PDEBUG(D_USBO, "i2c_w2 [%02x] = %02x", reg, val);
+	gspca_dev->usb_buf[0] = 0x81 | (2 << 4);	/* = a1 */
+	gspca_dev->usb_buf[1] = sd->i2c_base;
+	gspca_dev->usb_buf[2] = reg;
+	gspca_dev->usb_buf[3] = val;
+	gspca_dev->usb_buf[4] = 0;
+	gspca_dev->usb_buf[5] = 0;
+	gspca_dev->usb_buf[6] = 0;
+	gspca_dev->usb_buf[7] = 0x10;
+	usb_control_msg(gspca_dev->dev,
+			usb_sndctrlpipe(gspca_dev->dev, 0),
+			0x08,
+			USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_INTERFACE,
+			0x08,			/* value = i2c */
+			0,
+			gspca_dev->usb_buf, 8,
+			500);
 }
 
 /* I2C write 8 bytes */
 static void i2c_w8(struct gspca_dev *gspca_dev,
 		   const __u8 *buffer)
 {
-	reg_w(gspca_dev, 0x08, buffer, 8);
-	msleep(1);
+	memcpy(gspca_dev->usb_buf, buffer, 8);
+	usb_control_msg(gspca_dev->dev,
+			usb_sndctrlpipe(gspca_dev->dev, 0),
+			0x08,
+			USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_INTERFACE,
+			0x08, 0,		/* value, index */
+			gspca_dev->usb_buf, 8,
+			500);
 }
 
 /* read 5 bytes in gspca_dev->usb_buf */
@@ -613,24 +620,21 @@ static void i2c_r5(struct gspca_dev *gspca_dev, __u8 reg)
 	mode[6] = 0;
 	mode[7] = 0x10;
 	i2c_w8(gspca_dev, mode);
+	msleep(2);
 	mode[0] = 0x81 | (5 << 4) | 0x02;
 	mode[2] = 0;
 	i2c_w8(gspca_dev, mode);
+	msleep(2);
 	reg_r(gspca_dev, 0x0a, 5);
 }
 
 static int probesensor(struct gspca_dev *gspca_dev)
 {
 	struct sd *sd = (struct sd *) gspca_dev;
-	__u8 reg02;
-	static const __u8 datasend[] = { 2, 0 };
-	/* reg val1 val2 val3 val4 */
 
-	i2c_w2(gspca_dev, datasend);
-/* should write 0xa1 0x11 0x02 0x00 0x00 0x00 0x00 the 0x10 is add by i2cw */
+	i2c_w1(gspca_dev, 0x02, 0);			/* sensor wakeup */
 	msleep(10);
-	reg02 = 0x66;
-	reg_w(gspca_dev, 0x02, &reg02, 1);		/* Gpio on */
+	reg_w1(gspca_dev, 0x02, 0x66);			/* Gpio on */
 	msleep(10);
 	i2c_r5(gspca_dev, 0);				/* read sensor id */
 	if (gspca_dev->usb_buf[0] == 0x02
@@ -642,7 +646,7 @@ static int probesensor(struct gspca_dev *gspca_dev)
 		sd->sensor = SENSOR_HV7131R;
 		return SENSOR_HV7131R;
 	}
-	PDEBUG(D_PROBE, "Find Sensor %d %d %d",
+	PDEBUG(D_PROBE, "Find Sensor 0x%02x 0x%02x 0x%02x",
 		gspca_dev->usb_buf[0], gspca_dev->usb_buf[1],
 		gspca_dev->usb_buf[2]);
 	PDEBUG(D_PROBE, "Sensor sn9c102P Not found");
@@ -653,67 +657,44 @@ static int configure_gpio(struct gspca_dev *gspca_dev,
 			  const __u8 *sn9c1xx)
 {
 	struct sd *sd = (struct sd *) gspca_dev;
-	__u8 data;
-	__u8 regF1;
 	const __u8 *reg9a;
 	static const __u8 reg9a_def[] =
 		{0x08, 0x40, 0x20, 0x10, 0x00, 0x04};
-	static const __u8 reg9a_sn9c120[] =		/* from win trace */
-		{0x00, 0x40, 0x38, 0x30, 0x00, 0x20};
 	static const __u8 reg9a_sn9c325[] =
 		{0x0a, 0x40, 0x38, 0x30, 0x00, 0x20};
+	static const __u8 regd4[] = {0x60, 0x00, 0x00};
 
-
-	regF1 = 0x00;
-	reg_w(gspca_dev, 0xf1, &regF1, 1);
-	reg_w(gspca_dev, 0x01, &sn9c1xx[0], 1); /*fixme:jfm was [1] en v1*/
+	reg_w1(gspca_dev, 0xf1, 0x00);
+	reg_w1(gspca_dev, 0x01, 0x00);		/*jfm was sn9c1xx[1] in v1*/
 
 	/* configure gpio */
 	reg_w(gspca_dev, 0x01, &sn9c1xx[1], 2);
 	reg_w(gspca_dev, 0x08, &sn9c1xx[8], 2);
-	reg_w(gspca_dev, 0x17, &sn9c1xx[0x17], 5);	/* jfm was 3 */
+	reg_w(gspca_dev, 0x17, &sn9c1xx[0x17], 5);	/* jfm len was 3 */
 	switch (sd->bridge) {
 	case BRIDGE_SN9C325:
 		reg9a = reg9a_sn9c325;
 		break;
-	case BRIDGE_SN9C120:
-		reg9a = reg9a_sn9c120;
-		break;
 	default:
 		reg9a = reg9a_def;
 		break;
 	}
 	reg_w(gspca_dev, 0x9a, reg9a, 6);
 
-	data = 0x60;				/*fixme:jfm 60 00 00 (3) */
-	reg_w(gspca_dev, 0xd4, &data, 1);
+	reg_w(gspca_dev, 0xd4, regd4, sizeof regd4); /*fixme:jfm was 60 only*/
 
 	reg_w(gspca_dev, 0x03, &sn9c1xx[3], 0x0f);
 
 	switch (sd->bridge) {
-	case BRIDGE_SN9C120:			/* from win trace */
-		data = 0x61;
-		reg_w(gspca_dev, 0x01, &data, 1);
-		data = 0x20;
-		reg_w(gspca_dev, 0x17, &data, 1);
-		data = 0x60;
-		reg_w(gspca_dev, 0x01, &data, 1);
-		break;
 	case BRIDGE_SN9C325:
-		data = 0x43;
-		reg_w(gspca_dev, 0x01, &data, 1);
-		data = 0xae;
-		reg_w(gspca_dev, 0x17, &data, 1);
-		data = 0x42;
-		reg_w(gspca_dev, 0x01, &data, 1);
+		reg_w1(gspca_dev, 0x01, 0x43);
+		reg_w1(gspca_dev, 0x17, 0xae);
+		reg_w1(gspca_dev, 0x01, 0x42);
 		break;
 	default:
-		data = 0x43;
-		reg_w(gspca_dev, 0x01, &data, 1);
-		data = 0x61;
-		reg_w(gspca_dev, 0x17, &data, 1);
-		data = 0x42;
-		reg_w(gspca_dev, 0x01, &data, 1);
+		reg_w1(gspca_dev, 0x01, 0x43);
+		reg_w1(gspca_dev, 0x17, 0x61);
+		reg_w1(gspca_dev, 0x01, 0x42);
 	}
 
 	if (sd->sensor == SENSOR_HV7131R) {
@@ -770,6 +751,9 @@ static void ov7660_InitSensor(struct gspca_dev *gspca_dev)
 {
 	int i = 0;
 
+	i2c_w8(gspca_dev, ov7660_sensor_init[i]);	/* reset SCCB */
+	i++;
+	msleep(20);
 	while (ov7660_sensor_init[i][0]) {
 		i2c_w8(gspca_dev, ov7660_sensor_init[i]);
 		i++;
@@ -782,199 +766,23 @@ static int sd_config(struct gspca_dev *gspca_dev,
 {
 	struct sd *sd = (struct sd *) gspca_dev;
 	struct cam *cam;
-	__u16 vendor;
-	__u16 product;
-
-	vendor = id->idVendor;
-	product = id->idProduct;
-	sd->sensor = -1;
-	switch (vendor) {
-	case 0x0458:				/* Genius */
-/*		switch (product) {
-		case 0x7025: */
-			sd->bridge = BRIDGE_SN9C120;
-			sd->sensor = SENSOR_MI0360;
-			sd->i2c_base = 0x5d;
-/*			break;
-		} */
-		break;
-	case 0x045e:
-/*		switch (product) {
-		case 0x00f5:
-		case 0x00f7: */
-			sd->bridge = BRIDGE_SN9C105;
-			sd->sensor = SENSOR_OV7660;
-			sd->i2c_base = 0x21;
-/*			break;
-		} */
-		break;
-	case 0x0471:				/* Philips */
-/*		switch (product) {
-		case 0x0327:
-		case 0x0328:
-		case 0x0330: */
-			sd->bridge = BRIDGE_SN9C105;
-			sd->sensor = SENSOR_MI0360;
-			sd->i2c_base = 0x5d;
-/*			break;
-		} */
-		break;
-	case 0x0c45:				/* Sonix */
-		switch (product) {
-		case 0x6040:
-			sd->bridge = BRIDGE_SN9C102P;
-/*			sd->sensor = SENSOR_MI0360;	 * from BW600.inf */
-/*fixme: MI0360 base=5d ? */
-			sd->sensor = SENSOR_HV7131R;	/* gspcav1 value */
-			sd->i2c_base = 0x11;
-			break;
-/*		case 0x607a:				* from BW600.inf
-			sd->bridge = BRIDGE_SN9C102P;
-			sd->sensor = SENSOR_OV7648;
-			sd->i2c_base = 0x??;
-			break; */
-		case 0x607c:
-			sd->bridge = BRIDGE_SN9C102P;
-			sd->sensor = SENSOR_HV7131R;
-			sd->i2c_base = 0x11;
-			break;
-/*		case 0x607e:				* from BW600.inf
-			sd->bridge = BRIDGE_SN9C102P;
-			sd->sensor = SENSOR_OV7630;
-			sd->i2c_base = 0x??;
-			break; */
-		case 0x60c0:
-			sd->bridge = BRIDGE_SN9C105;
-			sd->sensor = SENSOR_MI0360;
-			sd->i2c_base = 0x5d;
-			break;
-/*		case 0x60c8:				* from BW600.inf
-			sd->bridge = BRIDGE_SN9C105;
-			sd->sensor = SENSOR_OM6801;
-			sd->i2c_base = 0x??;
-			break; */
-/*		case 0x60cc:				* from BW600.inf
-			sd->bridge = BRIDGE_SN9C105;
-			sd->sensor = SENSOR_HV7131GP;
-			sd->i2c_base = 0x??;
-			break; */
-		case 0x60ec:
-			sd->bridge = BRIDGE_SN9C105;
-			sd->sensor = SENSOR_MO4000;
-			sd->i2c_base = 0x21;
-			break;
-/*		case 0x60ef:				* from BW600.inf
-			sd->bridge = BRIDGE_SN9C105;
-			sd->sensor = SENSOR_ICM105C;
-			sd->i2c_base = 0x??;
-			break; */
-/*		case 0x60fa:				* from BW600.inf
-			sd->bridge = BRIDGE_SN9C105;
-			sd->sensor = SENSOR_OV7648;
-			sd->i2c_base = 0x??;
-			break; */
-		case 0x60fb:
-			sd->bridge = BRIDGE_SN9C105;
-			sd->sensor = SENSOR_OV7660;
-			sd->i2c_base = 0x21;
-			break;
-		case 0x60fc:
-			sd->bridge = BRIDGE_SN9C105;
-			sd->sensor = SENSOR_HV7131R;
-			sd->i2c_base = 0x11;
-			break;
-/*		case 0x60fe:				* from BW600.inf
-			sd->bridge = BRIDGE_SN9C105;
-			sd->sensor = SENSOR_OV7630;
-			sd->i2c_base = 0x??;
-			break; */
-/*		case 0x6108:				* from BW600.inf
-			sd->bridge = BRIDGE_SN9C120;
-			sd->sensor = SENSOR_OM6801;
-			sd->i2c_base = 0x??;
-			break; */
-/*		case 0x6122:				* from BW600.inf
-			sd->bridge = BRIDGE_SN9C110;
-			sd->sensor = SENSOR_ICM105C;
-			sd->i2c_base = 0x??;
-			break; */
-		case 0x612a:
-/*			sd->bridge = BRIDGE_SN9C110;	 * in BW600.inf */
-			sd->bridge = BRIDGE_SN9C325;
-			sd->sensor = SENSOR_OV7648;
-			sd->i2c_base = 0x21;
-/*fixme: sensor_init has base = 00 et 6e!*/
-			break;
-/*		case 0x6123:				* from BW600.inf
-			sd->bridge = BRIDGE_SN9C110;
-			sd->sensor = SENSOR_SanyoCCD;
-			sd->i2c_base = 0x??;
-			break; */
-		case 0x612c:
-			sd->bridge = BRIDGE_SN9C110;
-			sd->sensor = SENSOR_MO4000;
-			sd->i2c_base = 0x21;
-			break;
-/*		case 0x612e:				* from BW600.inf
-			sd->bridge = BRIDGE_SN9C110;
-			sd->sensor = SENSOR_OV7630;
-			sd->i2c_base = 0x??;
-			break; */
-/*		case 0x612f:				* from BW600.inf
-			sd->bridge = BRIDGE_SN9C110;
-			sd->sensor = SENSOR_ICM105C;
-			sd->i2c_base = 0x??;
-			break; */
-		case 0x6130:
-			sd->bridge = BRIDGE_SN9C120;
-			sd->sensor = SENSOR_MI0360;
-			sd->i2c_base = 0x5d;
-			break;
-		case 0x6138:
-			sd->bridge = BRIDGE_SN9C120;
-			sd->sensor = SENSOR_MO4000;
-			sd->i2c_base = 0x21;
-			break;
-/*		case 0x613a:				* from BW600.inf
-			sd->bridge = BRIDGE_SN9C120;
-			sd->sensor = SENSOR_OV7648;
-			sd->i2c_base = 0x??;
-			break; */
-		case 0x613b:
-			sd->bridge = BRIDGE_SN9C120;
-			sd->sensor = SENSOR_OV7660;
-			sd->i2c_base = 0x21;
-			break;
-		case 0x613c:
-			sd->bridge = BRIDGE_SN9C120;
-			sd->sensor = SENSOR_HV7131R;
-			sd->i2c_base = 0x11;
-			break;
-/*		case 0x613e:				* from BW600.inf
-			sd->bridge = BRIDGE_SN9C120;
-			sd->sensor = SENSOR_OV7630;
-			sd->i2c_base = 0x??;
-			break; */
-		}
-		break;
-	}
-	if (sd->sensor < 0) {
-		PDEBUG(D_ERR, "Invalid vendor/product %04x:%04x",
-			vendor, product);
-		return -EINVAL;
-	}
 
 	cam = &gspca_dev->cam;
-	cam->dev_name = (char *) id->driver_info;
 	cam->epaddr = 0x01;
 	cam->cam_mode = vga_mode;
 	cam->nmodes = ARRAY_SIZE(vga_mode);
 
+	sd->bridge = id->driver_info >> 16;
+	sd->sensor = id->driver_info >> 8;
+	sd->i2c_base = id->driver_info;
+
 	sd->qindex = 4;			/* set the quantization table */
 	sd->brightness = BRIGHTNESS_DEF;
 	sd->contrast = CONTRAST_DEF;
 	sd->colors = COLOR_DEF;
 	sd->autogain = AUTOGAIN_DEF;
+	sd->ag_cnt = -1;
+
 	return 0;
 }
 
@@ -983,34 +791,27 @@ static int sd_open(struct gspca_dev *gspca_dev)
 {
 	struct sd *sd = (struct sd *) gspca_dev;
 /*	const __u8 *sn9c1xx; */
-	__u8 regF1;
 	__u8 regGpio[] = { 0x29, 0x74 };
+	__u8 regF1;
 
 	/* setup a selector by bridge */
-	regF1 = 0x01;
-	reg_w(gspca_dev, 0xf1, &regF1, 1);
-	reg_r(gspca_dev, 0x00, 1);		/* -> regF1 = 0x00 */
-	regF1 = gspca_dev->usb_buf[0];
-	reg_w(gspca_dev, 0xf1, &regF1, 1);
+	reg_w1(gspca_dev, 0xf1, 0x01);
 	reg_r(gspca_dev, 0x00, 1);
+	reg_w1(gspca_dev, 0xf1, gspca_dev->usb_buf[0]);
+	reg_r(gspca_dev, 0x00, 1);		/* get sonix chip id */
 	regF1 = gspca_dev->usb_buf[0];
+	PDEBUG(D_PROBE, "Sonix chip id: %02x", regF1);
 	switch (sd->bridge) {
 	case BRIDGE_SN9C102P:
 		if (regF1 != 0x11)
 			return -ENODEV;
-		reg_w(gspca_dev, 0x02, &regGpio[1], 1);
+		reg_w1(gspca_dev, 0x02, regGpio[1]);
 		break;
 	case BRIDGE_SN9C105:
 		if (regF1 != 0x11)
 			return -ENODEV;
 		reg_w(gspca_dev, 0x02, regGpio, 2);
 		break;
-	case BRIDGE_SN9C110:
-		if (regF1 != 0x12)
-			return -ENODEV;
-		regGpio[1] = 0x62;
-		reg_w(gspca_dev, 0x02, &regGpio[1], 1);
-		break;
 	case BRIDGE_SN9C120:
 		if (regF1 != 0x12)
 			return -ENODEV;
@@ -1018,16 +819,15 @@ static int sd_open(struct gspca_dev *gspca_dev)
 		reg_w(gspca_dev, 0x02, regGpio, 2);
 		break;
 	default:
+/*	case BRIDGE_SN9C110: */
 /*	case BRIDGE_SN9C325: */
 		if (regF1 != 0x12)
 			return -ENODEV;
-		regGpio[1] = 0x62;
-		reg_w(gspca_dev, 0x02, &regGpio[1], 1);
+		reg_w1(gspca_dev, 0x02, 0x62);
 		break;
 	}
 
-	regF1 = 0x01;
-	reg_w(gspca_dev, 0xf1, &regF1, 1);
+	reg_w1(gspca_dev, 0xf1, 0x01);
 
 	return 0;
 }
@@ -1111,19 +911,14 @@ static void setbrightness(struct gspca_dev *gspca_dev)
 		sd->exposure = setexposure(gspca_dev, expo);
 		break;
 	case SENSOR_MI0360:
-		expo = sd->brightness >> 4;
-		sd->exposure = setexposure(gspca_dev, expo);
-		break;
 	case SENSOR_MO4000:
 		expo = sd->brightness >> 4;
 		sd->exposure = setexposure(gspca_dev, expo);
 		break;
-	case SENSOR_OV7660:
-		return;				/*jfm??*/
 	}
 
 	k2 = sd->brightness >> 10;
-	reg_w(gspca_dev, 0x96, &k2, 1);
+	reg_w1(gspca_dev, 0x96, k2);
 }
 
 static void setcontrast(struct gspca_dev *gspca_dev)
@@ -1132,8 +927,6 @@ static void setcontrast(struct gspca_dev *gspca_dev)
 	__u8 k2;
 	__u8 contrast[] = { 0x00, 0x00, 0x28, 0x00, 0x07, 0x00 };
 
-	if (sd->sensor == SENSOR_OV7660)
-		return;				/*jfm??*/
 	k2 = sd->contrast;
 	contrast[2] = k2;
 	contrast[0] = (k2 + 1) >> 1;
@@ -1152,7 +945,23 @@ static void setcolors(struct gspca_dev *gspca_dev)
 		data = (colour + 32) & 0x7f;	/* blue */
 	else
 		data = (-colour + 32) & 0x7f;	/* red */
-	reg_w(gspca_dev, 0x05, &data, 1);
+	reg_w1(gspca_dev, 0x05, data);
+}
+
+static void setautogain(struct gspca_dev *gspca_dev)
+{
+	struct sd *sd = (struct sd *) gspca_dev;
+
+	switch (sd->sensor) {
+	case SENSOR_HV7131R:
+	case SENSOR_MO4000:
+	case SENSOR_MI0360:
+		if (sd->autogain)
+			sd->ag_cnt = AG_CNT_START;
+		else
+			sd->ag_cnt = -1;
+		break;
+	}
 }
 
 /* -- start the camera -- */
@@ -1160,16 +969,11 @@ static void sd_start(struct gspca_dev *gspca_dev)
 {
 	struct sd *sd = (struct sd *) gspca_dev;
 	int i;
-	__u8 data;
-	__u8 reg1;
-	__u8 reg17;
+	__u8 reg1, reg17, reg18;
 	const __u8 *sn9c1xx;
 	int mode;
-	static const __u8 DC29[] = { 0x6a, 0x50, 0x00, 0x00, 0x50, 0x3c };
 	static const __u8 C0[] = { 0x2d, 0x2d, 0x3a, 0x05, 0x04, 0x3f };
 	static const __u8 CA[] = { 0x28, 0xd8, 0x14, 0xec };
-	static const __u8 CA_sn9c120[] =
-				 { 0x14, 0xec, 0x0a, 0xf6 };	/* SN9C120 */
 	static const __u8 CE[] = { 0x32, 0xdd, 0x2d, 0xdd };	/* MI0360 */
 	static const __u8 CE_sn9c325[] =
 			{ 0x32, 0xdd, 0x32, 0xdd };	/* OV7648 - SN9C325 */
@@ -1177,39 +981,32 @@ static void sd_start(struct gspca_dev *gspca_dev)
 	sn9c1xx = sn_tb[(int) sd->sensor];
 	configure_gpio(gspca_dev, sn9c1xx);
 
-/*fixme:jfm this sequence should appear at end of sd_start */
-/* with
-	data = 0x44;
-	reg_w(gspca_dev, 0x01, &data, 1); */
-	reg_w(gspca_dev, 0x15, &sn9c1xx[0x15], 1);
-	reg_w(gspca_dev, 0x16, &sn9c1xx[0x16], 1);
-	reg_w(gspca_dev, 0x12, &sn9c1xx[0x12], 1);
-	reg_w(gspca_dev, 0x13, &sn9c1xx[0x13], 1);
-	reg_w(gspca_dev, 0x18, &sn9c1xx[0x18], 1);
-	reg_w(gspca_dev, 0xd2, &DC29[0], 1);
-	reg_w(gspca_dev, 0xd3, &DC29[1], 1);
-	reg_w(gspca_dev, 0xc6, &DC29[2], 1);
-	reg_w(gspca_dev, 0xc7, &DC29[3], 1);
-	reg_w(gspca_dev, 0xc8, &DC29[4], 1);
-	reg_w(gspca_dev, 0xc9, &DC29[5], 1);
-/*fixme:jfm end of ending sequence */
-	reg_w(gspca_dev, 0x18, &sn9c1xx[0x18], 1);
+/*	reg_w1(gspca_dev, 0x01, 0x44);		jfm from win trace*/
+	reg_w1(gspca_dev, 0x15, sn9c1xx[0x15]);
+	reg_w1(gspca_dev, 0x16, sn9c1xx[0x16]);
+	reg_w1(gspca_dev, 0x12, sn9c1xx[0x12]);
+	reg_w1(gspca_dev, 0x13, sn9c1xx[0x13]);
+	reg_w1(gspca_dev, 0x18, sn9c1xx[0x18]);
+	reg_w1(gspca_dev, 0xd2, 0x6a);		/* DC29 */
+	reg_w1(gspca_dev, 0xd3, 0x50);
+	reg_w1(gspca_dev, 0xc6, 0x00);
+	reg_w1(gspca_dev, 0xc7, 0x00);
+	reg_w1(gspca_dev, 0xc8, 0x50);
+	reg_w1(gspca_dev, 0xc9, 0x3c);
+	reg_w1(gspca_dev, 0x18, sn9c1xx[0x18]);
 	switch (sd->bridge) {
 	case BRIDGE_SN9C325:
-		data = 0xae;
-		break;
-	case BRIDGE_SN9C120:
-		data = 0xa0;
+		reg17 = 0xae;
 		break;
 	default:
-		data = 0x60;
+		reg17 = 0x60;
 		break;
 	}
-	reg_w(gspca_dev, 0x17, &data, 1);
-	reg_w(gspca_dev, 0x05, &sn9c1xx[5], 1);
-	reg_w(gspca_dev, 0x07, &sn9c1xx[7], 1);
-	reg_w(gspca_dev, 0x06, &sn9c1xx[6], 1);
-	reg_w(gspca_dev, 0x14, &sn9c1xx[0x14], 1);
+	reg_w1(gspca_dev, 0x17, reg17);
+	reg_w1(gspca_dev, 0x05, sn9c1xx[5]);
+	reg_w1(gspca_dev, 0x07, sn9c1xx[7]);
+	reg_w1(gspca_dev, 0x06, sn9c1xx[6]);
+	reg_w1(gspca_dev, 0x14, sn9c1xx[0x14]);
 	switch (sd->bridge) {
 	case BRIDGE_SN9C325:
 		reg_w(gspca_dev, 0x20, regsn20_sn9c325,
@@ -1217,55 +1014,30 @@ static void sd_start(struct gspca_dev *gspca_dev)
 		for (i = 0; i < 8; i++)
 			reg_w(gspca_dev, 0x84, reg84_sn9c325,
 					sizeof reg84_sn9c325);
-		data = 0x0a;
-		reg_w(gspca_dev, 0x9a, &data, 1);
-		data = 0x60;
-		reg_w(gspca_dev, 0x99, &data, 1);
-		break;
-	case BRIDGE_SN9C120:
-		reg_w(gspca_dev, 0x20, regsn20_sn9c120,
-				sizeof regsn20_sn9c120);
-		for (i = 0; i < 2; i++)
-			reg_w(gspca_dev, 0x84, reg84_sn9c120_1,
-					sizeof reg84_sn9c120_1);
-		for (i = 0; i < 6; i++)
-			reg_w(gspca_dev, 0x84, reg84_sn9c120_2,
-					sizeof reg84_sn9c120_2);
-		reg_w(gspca_dev, 0x84, reg84_sn9c120_3,
-				sizeof reg84_sn9c120_3);
-		data = 0x05;
-		reg_w(gspca_dev, 0x9a, &data, 1);
-		data = 0x5b;
-		reg_w(gspca_dev, 0x99, &data, 1);
+		reg_w1(gspca_dev, 0x9a, 0x0a);
+		reg_w1(gspca_dev, 0x99, 0x60);
 		break;
 	default:
 		reg_w(gspca_dev, 0x20, regsn20, sizeof regsn20);
 		for (i = 0; i < 8; i++)
 			reg_w(gspca_dev, 0x84, reg84, sizeof reg84);
-		data = 0x08;
-		reg_w(gspca_dev, 0x9a, &data, 1);
-		data = 0x59;
-		reg_w(gspca_dev, 0x99, &data, 1);
+		reg_w1(gspca_dev, 0x9a, 0x08);
+		reg_w1(gspca_dev, 0x99, 0x59);
 		break;
 	}
 
 	mode = gspca_dev->cam.cam_mode[(int) gspca_dev->curr_mode].priv;
-	reg1 = 0x02;
+	if (mode)
+		reg1 = 0x46;	/* 320 clk 48Mhz */
+	else
+		reg1 = 0x06;	/* 640 clk 24Mz */
 	reg17 = 0x61;
 	switch (sd->sensor) {
 	case SENSOR_HV7131R:
 		hv7131R_InitSensor(gspca_dev);
-		if (mode)
-			reg1 = 0x46;	/* 320 clk 48Mhz */
-		else
-			reg1 = 0x06;	/* 640 clk 24Mz */
 		break;
 	case SENSOR_MI0360:
 		mi0360_InitSensor(gspca_dev);
-		if (mode)
-			reg1 = 0x46;	/* 320 clk 48Mhz */
-		else
-			reg1 = 0x06;	/* 640 clk 24Mz */
 		break;
 	case SENSOR_MO4000:
 		mo4000_InitSensor(gspca_dev);
@@ -1274,13 +1046,13 @@ static void sd_start(struct gspca_dev *gspca_dev)
 			reg1 = 0x06;	/* clk 24Mz */
 		} else {
 			reg17 = 0x22;	/* 640 MCKSIZE */
-			reg1 = 0x06;	/* 640 clk 24Mz */
+/*			reg1 = 0x06;	 * 640 clk 24Mz (done) */
 		}
 		break;
 	case SENSOR_OV7648:
+		ov7648_InitSensor(gspca_dev);
 		reg17 = 0xa2;
 		reg1 = 0x44;
-		ov7648_InitSensor(gspca_dev);
 /*		if (mode)
 			;		 * 320x2...
 		else
@@ -1292,24 +1064,16 @@ static void sd_start(struct gspca_dev *gspca_dev)
 		if (mode) {
 /*			reg17 = 0x21;	 * 320 */
 /*			reg1 = 0x44; */
-			reg1 = 0x46;
+/*			reg1 = 0x46;	(done) */
 		} else {
-			reg17 = 0xa2;	/* 640 */
-			reg1 = 0x40;
+			reg17 = 0x22;	/* 640 MCKSIZE */
+			reg1 = 0x06;
 		}
 		break;
 	}
 	reg_w(gspca_dev, 0xc0, C0, 6);
+	reg_w(gspca_dev, 0xca, CA, 4);
 	switch (sd->bridge) {
-	case BRIDGE_SN9C120:			/*jfm ?? */
-		reg_w(gspca_dev, 0xca, CA_sn9c120, 4);
-		break;
-	default:
-		reg_w(gspca_dev, 0xca, CA, 4);
-		break;
-	}
-	switch (sd->bridge) {
-	case BRIDGE_SN9C120:			/*jfm ?? */
 	case BRIDGE_SN9C325:
 		reg_w(gspca_dev, 0xce, CE_sn9c325, 4);
 		break;
@@ -1320,19 +1084,19 @@ static void sd_start(struct gspca_dev *gspca_dev)
 	}
 
 	/* here change size mode 0 -> VGA; 1 -> CIF */
-	data = 0x40 | sn9c1xx[0x18] | (mode << 4);
-	reg_w(gspca_dev, 0x18, &data, 1);
+	reg18 = sn9c1xx[0x18] | (mode << 4);
+	reg_w1(gspca_dev, 0x18, reg18 | 0x40);
 
 	reg_w(gspca_dev, 0x100, qtable4, 0x40);
 	reg_w(gspca_dev, 0x140, qtable4 + 0x40, 0x40);
 
-	data = sn9c1xx[0x18] | (mode << 4);
-	reg_w(gspca_dev, 0x18, &data, 1);
+	reg_w1(gspca_dev, 0x18, reg18);
 
-	reg_w(gspca_dev, 0x17, &reg17, 1);
-	reg_w(gspca_dev, 0x01, &reg1, 1);
+	reg_w1(gspca_dev, 0x17, reg17);
+	reg_w1(gspca_dev, 0x01, reg1);
 	setbrightness(gspca_dev);
 	setcontrast(gspca_dev);
+	setautogain(gspca_dev);
 }
 
 static void sd_stopN(struct gspca_dev *gspca_dev)
@@ -1342,7 +1106,6 @@ static void sd_stopN(struct gspca_dev *gspca_dev)
 		{ 0xa1, 0x11, 0x02, 0x09, 0x00, 0x00, 0x00, 0x10 };
 	static const __u8 stopmi0360[] =
 		{ 0xb1, 0x5d, 0x07, 0x00, 0x00, 0x00, 0x00, 0x10 };
-	__u8 regF1;
 	__u8 data;
 	const __u8 *sn9c1xx;
 
@@ -1356,22 +1119,20 @@ static void sd_stopN(struct gspca_dev *gspca_dev)
 		i2c_w8(gspca_dev, stopmi0360);
 		data = 0x29;
 		break;
-	case SENSOR_MO4000:
-		break;
 	case SENSOR_OV7648:
 		data = 0x29;
 		break;
 	default:
+/*	case SENSOR_MO4000: */
 /*	case SENSOR_OV7660: */
 		break;
 	}
 	sn9c1xx = sn_tb[(int) sd->sensor];
-	reg_w(gspca_dev, 0x01, &sn9c1xx[1], 1);
-	reg_w(gspca_dev, 0x17, &sn9c1xx[0x17], 1);
-	reg_w(gspca_dev, 0x01, &sn9c1xx[1], 1);
-	reg_w(gspca_dev, 0x01, &data, 1);
-	regF1 = 0x01;
-	reg_w(gspca_dev, 0xf1, &regF1, 1);
+	reg_w1(gspca_dev, 0x01, sn9c1xx[1]);
+	reg_w1(gspca_dev, 0x17, sn9c1xx[0x17]);
+	reg_w1(gspca_dev, 0x01, sn9c1xx[1]);
+	reg_w1(gspca_dev, 0x01, data);
+	reg_w1(gspca_dev, 0xf1, 0x01);
 }
 
 static void sd_stop0(struct gspca_dev *gspca_dev)
@@ -1382,16 +1143,23 @@ static void sd_close(struct gspca_dev *gspca_dev)
 {
 }
 
-static void setautogain(struct gspca_dev *gspca_dev)
+static void do_autogain(struct gspca_dev *gspca_dev)
 {
 	struct sd *sd = (struct sd *) gspca_dev;
-	/* Thanks S., without your advice, autobright should not work :) */
 	int delta;
-	int expotimes = 0;
+	int expotimes;
 	__u8 luma_mean = 130;
 	__u8 luma_delta = 20;
 
-	delta = sd->avg_lum;
+	/* Thanks S., without your advice, autobright should not work :) */
+	if (sd->ag_cnt < 0)
+		return;
+	if (--sd->ag_cnt >= 0)
+		return;
+	sd->ag_cnt = AG_CNT_START;
+
+	delta = atomic_read(&sd->avg_lum);
+	PDEBUG(D_FRAM, "mean lum %d", delta);
 	if (delta < luma_mean - luma_delta ||
 	    delta > luma_mean + luma_delta) {
 		switch (sd->sensor) {
@@ -1403,8 +1171,9 @@ static void setautogain(struct gspca_dev *gspca_dev)
 			sd->exposure = setexposure(gspca_dev,
 					(unsigned int) (expotimes << 8));
 			break;
-		case SENSOR_MO4000:
-		case SENSOR_MI0360:
+		default:
+/*		case SENSOR_MO4000: */
+/*		case SENSOR_MI0360: */
 			expotimes = sd->exposure;
 			expotimes += (luma_mean - delta) >> 6;
 			if (expotimes < 0)
@@ -1417,6 +1186,8 @@ static void setautogain(struct gspca_dev *gspca_dev)
 	}
 }
 
+/* scan the URB packets */
+/* This function is run at interrupt level. */
 static void sd_pkt_scan(struct gspca_dev *gspca_dev,
 			struct gspca_frame *frame,	/* target */
 			__u8 *data,			/* isoc packet */
@@ -1433,9 +1204,6 @@ static void sd_pkt_scan(struct gspca_dev *gspca_dev,
 				frame, data, sof + 2);
 		if (sd->ag_cnt < 0)
 			return;
-		if (--sd->ag_cnt >= 0)
-			return;
-		sd->ag_cnt = AG_CNT_START;
 /* w1 w2 w3 */
 /* w4 w5 w6 */
 /* w7 w8 */
@@ -1450,9 +1218,7 @@ static void sd_pkt_scan(struct gspca_dev *gspca_dev,
 /* w5 */
 		avg_lum += ((data[sof + 31] << 8) | data[sof + 32]) >> 4;
 		avg_lum >>= 4;
-		sd->avg_lum = avg_lum;
-		PDEBUG(D_PACK, "mean lum %d", avg_lum);
-		setautogain(gspca_dev);
+		atomic_set(&sd->avg_lum, avg_lum);
 		return;
 	}
 	if (gspca_dev->last_packet_type == LAST_PACKET) {
@@ -1489,6 +1255,7 @@ static unsigned int getexposure(struct gspca_dev *gspca_dev)
 			(hexpo << 10) | (mexpo << 2) | lexpo);
 		return (hexpo << 10) | (mexpo << 2) | lexpo;
 	default:
+/*	case SENSOR_OV7648:		* jfm: is it ok for 7648? */
 /*	case SENSOR_OV7660: */
 		/* read sensor exposure */
 		i2c_r5(gspca_dev, 0x04);
@@ -1507,14 +1274,12 @@ static void getbrightness(struct gspca_dev *gspca_dev)
 	/* hardcoded registers seem not readable */
 	switch (sd->sensor) {
 	case SENSOR_HV7131R:
-/*		sd->brightness = 0x7fff; */
 		sd->brightness = getexposure(gspca_dev) >> 4;
 		break;
 	case SENSOR_MI0360:
 		sd->brightness = getexposure(gspca_dev) << 4;
 		break;
 	case SENSOR_MO4000:
-/*		sd->brightness = 0x1fff; */
 		sd->brightness = getexposure(gspca_dev) << 4;
 		break;
 	}
@@ -1580,10 +1345,8 @@ static int sd_setautogain(struct gspca_dev *gspca_dev, __s32 val)
 	struct sd *sd = (struct sd *) gspca_dev;
 
 	sd->autogain = val;
-	if (val)
-		sd->ag_cnt = AG_CNT_START;
-	else
-		sd->ag_cnt = -1;
+	if (gspca_dev->streaming)
+		setautogain(gspca_dev);
 	return 0;
 }
 
@@ -1607,33 +1370,57 @@ static const struct sd_desc sd_desc = {
 	.stop0 = sd_stop0,
 	.close = sd_close,
 	.pkt_scan = sd_pkt_scan,
+	.dq_callback = do_autogain,
 };
 
 /* -- module initialisation -- */
-#define DVNM(name) .driver_info = (kernel_ulong_t) name
+#define BSI(bridge, sensor, i2c_addr) \
+	.driver_info = (BRIDGE_ ## bridge << 16) \
+			| (SENSOR_ ## sensor << 8) \
+			| (i2c_addr)
 static const __devinitdata struct usb_device_id device_table[] = {
 #ifndef CONFIG_USB_SN9C102
-	{USB_DEVICE(0x0458, 0x7025), DVNM("Genius Eye 311Q")},
-	{USB_DEVICE(0x045e, 0x00f5), DVNM("MicroSoft VX3000")},
-	{USB_DEVICE(0x045e, 0x00f7), DVNM("MicroSoft VX1000")},
-	{USB_DEVICE(0x0471, 0x0327), DVNM("Philips SPC 600 NC")},
-	{USB_DEVICE(0x0471, 0x0328), DVNM("Philips SPC 700 NC")},
+	{USB_DEVICE(0x0458, 0x7025), BSI(SN9C120, MI0360, 0x5d)},
+	{USB_DEVICE(0x045e, 0x00f5), BSI(SN9C105, OV7660, 0x21)},
+	{USB_DEVICE(0x045e, 0x00f7), BSI(SN9C105, OV7660, 0x21)},
+	{USB_DEVICE(0x0471, 0x0327), BSI(SN9C105, MI0360, 0x5d)},
+	{USB_DEVICE(0x0471, 0x0328), BSI(SN9C105, MI0360, 0x5d)},
 #endif
-	{USB_DEVICE(0x0471, 0x0330), DVNM("Philips SPC 710NC")},
-	{USB_DEVICE(0x0c45, 0x6040), DVNM("Speed NVC 350K")},
-	{USB_DEVICE(0x0c45, 0x607c), DVNM("Sonix sn9c102p Hv7131R")},
-	{USB_DEVICE(0x0c45, 0x60c0), DVNM("Sangha Sn535")},
-	{USB_DEVICE(0x0c45, 0x60ec), DVNM("SN9C105+MO4000")},
-	{USB_DEVICE(0x0c45, 0x60fb), DVNM("Surfer NoName")},
-	{USB_DEVICE(0x0c45, 0x60fc), DVNM("LG-LIC300")},
-	{USB_DEVICE(0x0c45, 0x612a), DVNM("Avant Camera")},
-	{USB_DEVICE(0x0c45, 0x612c), DVNM("Typhoon Rasy Cam 1.3MPix")},
+	{USB_DEVICE(0x0471, 0x0330), BSI(SN9C105, MI0360, 0x5d)},
+	{USB_DEVICE(0x0c45, 0x6040), BSI(SN9C102P, HV7131R, 0x11)},
+/* bw600.inf:
+	{USB_DEVICE(0x0c45, 0x6040), BSI(SN9C102P, MI0360, 0x5d)}, */
+/*	{USB_DEVICE(0x0c45, 0x603a), BSI(SN9C102P, OV7648, 0x??)}, */
+/*	{USB_DEVICE(0x0c45, 0x607a), BSI(SN9C102P, OV7648, 0x??)}, */
+	{USB_DEVICE(0x0c45, 0x607c), BSI(SN9C102P, HV7131R, 0x11)},
+/*	{USB_DEVICE(0x0c45, 0x607e), BSI(SN9C102P, OV7630, 0x??)}, */
+	{USB_DEVICE(0x0c45, 0x60c0), BSI(SN9C105, MI0360, 0x5d)},
+/*	{USB_DEVICE(0x0c45, 0x60c8), BSI(SN9C105, OM6801, 0x??)}, */
+/*	{USB_DEVICE(0x0c45, 0x60cc), BSI(SN9C105, HV7131GP, 0x??)}, */
+	{USB_DEVICE(0x0c45, 0x60ec), BSI(SN9C105, MO4000, 0x21)},
+/*	{USB_DEVICE(0x0c45, 0x60ef), BSI(SN9C105, ICM105C, 0x??)}, */
+/*	{USB_DEVICE(0x0c45, 0x60fa), BSI(SN9C105, OV7648, 0x??)}, */
+	{USB_DEVICE(0x0c45, 0x60fb), BSI(SN9C105, OV7660, 0x21)},
+	{USB_DEVICE(0x0c45, 0x60fc), BSI(SN9C105, HV7131R, 0x11)},
+/*	{USB_DEVICE(0x0c45, 0x60fe), BSI(SN9C105, OV7630, 0x??)}, */
+/*	{USB_DEVICE(0x0c45, 0x6108), BSI(SN9C120, OM6801, 0x??)}, */
+/*	{USB_DEVICE(0x0c45, 0x6122), BSI(SN9C110, ICM105C, 0x??)}, */
+/*	{USB_DEVICE(0x0c45, 0x6123), BSI(SN9C110, SanyoCCD, 0x??)}, */
+	{USB_DEVICE(0x0c45, 0x612a), BSI(SN9C325, OV7648, 0x21)},
+/* bw600.inf:
+	{USB_DEVICE(0x0c45, 0x612a), BSI(SN9C110, OV7648, 0x21)}, */
+	{USB_DEVICE(0x0c45, 0x612c), BSI(SN9C110, MO4000, 0x21)},
+/*	{USB_DEVICE(0x0c45, 0x612e), BSI(SN9C110, OV7630, 0x??)}, */
+/*	{USB_DEVICE(0x0c45, 0x612f), BSI(SN9C110, ICM105C, 0x??)}, */
 #ifndef CONFIG_USB_SN9C102
-	{USB_DEVICE(0x0c45, 0x6130), DVNM("Sonix Pccam")},
-	{USB_DEVICE(0x0c45, 0x6138), DVNM("Sn9c120 Mo4000")},
-	{USB_DEVICE(0x0c45, 0x613b), DVNM("Surfer SN-206")},
-	{USB_DEVICE(0x0c45, 0x613c), DVNM("Sonix Pccam168")},
+	{USB_DEVICE(0x0c45, 0x6130), BSI(SN9C120, MI0360, 0x5d)},
+	{USB_DEVICE(0x0c45, 0x6138), BSI(SN9C120, MO4000, 0x21)},
+/*	{USB_DEVICE(0x0c45, 0x613a), BSI(SN9C120, OV7648, 0x??)}, */
+	{USB_DEVICE(0x0c45, 0x613b), BSI(SN9C120, OV7660, 0x21)},
+	{USB_DEVICE(0x0c45, 0x613c), BSI(SN9C120, HV7131R, 0x11)},
+/*	{USB_DEVICE(0x0c45, 0x613e), BSI(SN9C120, OV7630, 0x??)}, */
 #endif
+	{USB_DEVICE(0x0c45, 0x6143), BSI(SN9C120, MI0360, 0x5d)},
 	{}
 };
 MODULE_DEVICE_TABLE(usb, device_table);
@@ -1658,7 +1445,7 @@ static int __init sd_mod_init(void)
 {
 	if (usb_register(&sd_driver) < 0)
 		return -1;
-	info("v%s registered", version);
+	info("registered");
 	return 0;
 }
 static void __exit sd_mod_exit(void)
diff --git a/drivers/media/video/gspca/spca500.c b/drivers/media/video/gspca/spca500.c
index 156206118795..17fe2c2a440d 100644
--- a/drivers/media/video/gspca/spca500.c
+++ b/drivers/media/video/gspca/spca500.c
@@ -24,9 +24,6 @@
 #include "gspca.h"
 #include "jpeg.h"
 
-#define DRIVER_VERSION_NUMBER	KERNEL_VERSION(2, 1, 7)
-static const char version[] = "2.1.7";
-
 MODULE_AUTHOR("Michel Xhaard <mxhaard@users.sourceforge.net>");
 MODULE_DESCRIPTION("GSPCA/SPCA500 USB Camera Driver");
 MODULE_LICENSE("GPL");
@@ -630,109 +627,10 @@ static int sd_config(struct gspca_dev *gspca_dev,
 {
 	struct sd *sd = (struct sd *) gspca_dev;
 	struct cam *cam;
-	__u16 vendor;
-	__u16 product;
-
-	vendor = id->idVendor;
-	product = id->idProduct;
-	switch (vendor) {
-	case 0x040a:		/* Kodak cameras */
-/*		switch (product) { */
-/*		case 0x0300: */
-			sd->subtype = KodakEZ200;
-/*			break; */
-/*		} */
-		break;
-	case 0x041e:		/* Creative cameras */
-/*		switch (product) { */
-/*		case 0x400a: */
-			sd->subtype = CreativePCCam300;
-/*			break; */
-/*		} */
-		break;
-	case 0x046d:		/* Logitech Labtec */
-		switch (product) {
-		case 0x0890:
-			sd->subtype = LogitechTraveler;
-			break;
-		case 0x0900:
-			sd->subtype = LogitechClickSmart310;
-			break;
-		case 0x0901:
-			sd->subtype = LogitechClickSmart510;
-			break;
-		}
-		break;
-	case 0x04a5:		/* Benq */
-/*		switch (product) { */
-/*		case 0x300c: */
-			sd->subtype = BenqDC1016;
-/*			break; */
-/*		} */
-		break;
-	case 0x04fc:		/* SunPlus */
-/*		switch (product) { */
-/*		case 0x7333: */
-			sd->subtype = PalmPixDC85;
-/*			break; */
-/*		} */
-		break;
-	case 0x055f:		/* Mustek cameras */
-		switch (product) {
-		case 0xc200:
-			sd->subtype = MustekGsmart300;
-			break;
-		case 0xc220:
-			sd->subtype = Gsmartmini;
-			break;
-		}
-		break;
-	case 0x06bd:		/* Agfa Cl20 */
-/*		switch (product) { */
-/*		case 0x0404: */
-			sd->subtype = AgfaCl20;
-/*			break; */
-/*		} */
-		break;
-	case 0x06be:		/* Optimedia */
-/*		switch (product) { */
-/*		case 0x0800: */
-			sd->subtype = Optimedia;
-/*			break; */
-/*		} */
-		break;
-	case 0x084d:		/* D-Link / Minton */
-/*		switch (product) { */
-/*		case 0x0003:	 * DSC-350 / S-Cam F5 */
-			sd->subtype = DLinkDSC350;
-/*			break; */
-/*		} */
-		break;
-	case 0x08ca:		/* Aiptek */
-/*		switch (product) { */
-/*		case 0x0103: */
-			sd->subtype = AiptekPocketDV;
-/*			break; */
-/*		} */
-		break;
-	case 0x2899:		/* ToptroIndustrial */
-/*		switch (product) { */
-/*		case 0x012c: */
-			sd->subtype = ToptroIndus;
-/*			break; */
-/*		} */
-		break;
-	case 0x8086:		/* Intel */
-/*		switch (product) { */
-/*		case 0x0630:	 * Pocket PC Camera */
-			sd->subtype = IntelPocketPCCamera;
-/*			break; */
-/*		} */
-		break;
-	}
+
 	cam = &gspca_dev->cam;
-	cam->dev_name = (char *) id->driver_info;
 	cam->epaddr = 0x01;
+	sd->subtype = id->driver_info;
 	if (sd->subtype != LogitechClickSmart310) {
 		cam->cam_mode = vga_mode;
 		cam->nmodes = sizeof vga_mode / sizeof vga_mode[0];
@@ -1162,23 +1060,22 @@ static struct sd_desc sd_desc = {
 };
 
 /* -- module initialisation -- */
-#define DVNM(name) .driver_info = (kernel_ulong_t) name
 static const __devinitdata struct usb_device_id device_table[] = {
-	{USB_DEVICE(0x040a, 0x0300), DVNM("Kodak EZ200")},
-	{USB_DEVICE(0x041e, 0x400a), DVNM("Creative PC-CAM 300")},
-	{USB_DEVICE(0x046d, 0x0890), DVNM("Logitech QuickCam traveler")},
-	{USB_DEVICE(0x046d, 0x0900), DVNM("Logitech Inc. ClickSmart 310")},
-	{USB_DEVICE(0x046d, 0x0901), DVNM("Logitech Inc. ClickSmart 510")},
-	{USB_DEVICE(0x04a5, 0x300c), DVNM("Benq DC1016")},
-	{USB_DEVICE(0x04fc, 0x7333), DVNM("PalmPixDC85")},
-	{USB_DEVICE(0x055f, 0xc200), DVNM("Mustek Gsmart 300")},
-	{USB_DEVICE(0x055f, 0xc220), DVNM("Gsmart Mini")},
-	{USB_DEVICE(0x06bd, 0x0404), DVNM("Agfa CL20")},
-	{USB_DEVICE(0x06be, 0x0800), DVNM("Optimedia")},
-	{USB_DEVICE(0x084d, 0x0003), DVNM("D-Link DSC-350")},
-	{USB_DEVICE(0x08ca, 0x0103), DVNM("Aiptek PocketDV")},
-	{USB_DEVICE(0x2899, 0x012c), DVNM("Toptro Industrial")},
-	{USB_DEVICE(0x8086, 0x0630), DVNM("Intel Pocket PC Camera")},
+	{USB_DEVICE(0x040a, 0x0300), .driver_info = KodakEZ200},
+	{USB_DEVICE(0x041e, 0x400a), .driver_info = CreativePCCam300},
+	{USB_DEVICE(0x046d, 0x0890), .driver_info = LogitechTraveler},
+	{USB_DEVICE(0x046d, 0x0900), .driver_info = LogitechClickSmart310},
+	{USB_DEVICE(0x046d, 0x0901), .driver_info = LogitechClickSmart510},
+	{USB_DEVICE(0x04a5, 0x300c), .driver_info = BenqDC1016},
+	{USB_DEVICE(0x04fc, 0x7333), .driver_info = PalmPixDC85},
+	{USB_DEVICE(0x055f, 0xc200), .driver_info = MustekGsmart300},
+	{USB_DEVICE(0x055f, 0xc220), .driver_info = Gsmartmini},
+	{USB_DEVICE(0x06bd, 0x0404), .driver_info = AgfaCl20},
+	{USB_DEVICE(0x06be, 0x0800), .driver_info = Optimedia},
+	{USB_DEVICE(0x084d, 0x0003), .driver_info = DLinkDSC350},
+	{USB_DEVICE(0x08ca, 0x0103), .driver_info = AiptekPocketDV},
+	{USB_DEVICE(0x2899, 0x012c), .driver_info = ToptroIndus},
+	{USB_DEVICE(0x8086, 0x0630), .driver_info = IntelPocketPCCamera},
 	{}
 };
 MODULE_DEVICE_TABLE(usb, device_table);
@@ -1203,7 +1100,7 @@ static int __init sd_mod_init(void)
 {
 	if (usb_register(&sd_driver) < 0)
 		return -1;
-	PDEBUG(D_PROBE, "v%s registered", version);
+	PDEBUG(D_PROBE, "registered");
 	return 0;
 }
 static void __exit sd_mod_exit(void)
diff --git a/drivers/media/video/gspca/spca501.c b/drivers/media/video/gspca/spca501.c
index 50e929de0203..51a3c3429ef0 100644
--- a/drivers/media/video/gspca/spca501.c
+++ b/drivers/media/video/gspca/spca501.c
@@ -23,9 +23,6 @@
 
 #include "gspca.h"
 
-#define DRIVER_VERSION_NUMBER	KERNEL_VERSION(2, 1, 7)
-static const char version[] = "2.1.7";
-
 MODULE_AUTHOR("Michel Xhaard <mxhaard@users.sourceforge.net>");
 MODULE_DESCRIPTION("GSPCA/SPCA501 USB Camera Driver");
 MODULE_LICENSE("GPL");
@@ -1923,63 +1920,12 @@ static int sd_config(struct gspca_dev *gspca_dev,
 {
 	struct sd *sd = (struct sd *) gspca_dev;
 	struct cam *cam;
-	__u16 vendor;
-	__u16 product;
-
-	vendor = id->idVendor;
-	product = id->idProduct;
-	switch (vendor) {
-	case 0x0000:		/* Unknow Camera */
-/*		switch (product) { */
-/*		case 0x0000: */
-			sd->subtype = MystFromOriUnknownCamera;
-/*			break; */
-/*		} */
-		break;
-	case 0x040a:		/* Kodak cameras */
-/*		switch (product) { */
-/*		case 0x0002: */
-			sd->subtype = KodakDVC325;
-/*			break; */
-/*		} */
-		break;
-	case 0x0497:		/* Smile International */
-/*		switch (product) { */
-/*		case 0xc001: */
-			sd->subtype = SmileIntlCamera;
-/*			break; */
-/*		} */
-		break;
-	case 0x0506:		/* 3COM cameras */
-/*		switch (product) { */
-/*		case 0x00df: */
-			sd->subtype = ThreeComHomeConnectLite;
-/*			break; */
-/*		} */
-		break;
-	case 0x0733:	/* Rebadged ViewQuest (Intel) and ViewQuest cameras */
-		switch (product) {
-		case 0x0401:
-			sd->subtype = IntelCreateAndShare;
-			break;
-		case 0x0402:
-			sd->subtype = ViewQuestM318B;
-			break;
-		}
-		break;
-	case 0x1776:		/* Arowana */
-/*		switch (product) { */
-/*		case 0x501c: */
-			sd->subtype = Arowana300KCMOSCamera;
-/*			break; */
-/*		} */
-		break;
-	}
+
 	cam = &gspca_dev->cam;
-	cam->dev_name = (char *) id->driver_info;
 	cam->epaddr = 0x01;
 	cam->cam_mode = vga_mode;
 	cam->nmodes = sizeof vga_mode / sizeof vga_mode[0];
+	sd->subtype = id->driver_info;
 	sd->brightness = sd_ctrls[MY_BRIGHTNESS].qctrl.default_value;
 	sd->contrast = sd_ctrls[MY_CONTRAST].qctrl.default_value;
 	sd->colors = sd_ctrls[MY_COLOR].qctrl.default_value;
@@ -2183,15 +2129,14 @@ static const struct sd_desc sd_desc = {
 };
 
 /* -- module initialisation -- */
-#define DVNM(name) .driver_info = (kernel_ulong_t) name
 static const __devinitdata struct usb_device_id device_table[] = {
-	{USB_DEVICE(0x040a, 0x0002), DVNM("Kodak DVC-325")},
-	{USB_DEVICE(0x0497, 0xc001), DVNM("Smile International")},
-	{USB_DEVICE(0x0506, 0x00df), DVNM("3Com HomeConnect Lite")},
-	{USB_DEVICE(0x0733, 0x0401), DVNM("Intel Create and Share")},
-	{USB_DEVICE(0x0733, 0x0402), DVNM("ViewQuest M318B")},
-	{USB_DEVICE(0x1776, 0x501c), DVNM("Arowana 300K CMOS Camera")},
-	{USB_DEVICE(0x0000, 0x0000), DVNM("MystFromOri Unknow Camera")},
+	{USB_DEVICE(0x040a, 0x0002), .driver_info = KodakDVC325},
+	{USB_DEVICE(0x0497, 0xc001), .driver_info = SmileIntlCamera},
+	{USB_DEVICE(0x0506, 0x00df), .driver_info = ThreeComHomeConnectLite},
+	{USB_DEVICE(0x0733, 0x0401), .driver_info = IntelCreateAndShare},
+	{USB_DEVICE(0x0733, 0x0402), .driver_info = ViewQuestM318B},
+	{USB_DEVICE(0x1776, 0x501c), .driver_info = Arowana300KCMOSCamera},
+	{USB_DEVICE(0x0000, 0x0000), .driver_info = MystFromOriUnknownCamera},
 	{}
 };
 MODULE_DEVICE_TABLE(usb, device_table);
@@ -2216,7 +2161,7 @@ static int __init sd_mod_init(void)
 {
 	if (usb_register(&sd_driver) < 0)
 		return -1;
-	PDEBUG(D_PROBE, "v%s registered", version);
+	PDEBUG(D_PROBE, "registered");
 	return 0;
 }
 static void __exit sd_mod_exit(void)
diff --git a/drivers/media/video/gspca/spca505.c b/drivers/media/video/gspca/spca505.c
index ddea6e140aa8..eda29d609359 100644
--- a/drivers/media/video/gspca/spca505.c
+++ b/drivers/media/video/gspca/spca505.c
@@ -23,9 +23,6 @@
 
 #include "gspca.h"
 
-#define DRIVER_VERSION_NUMBER	KERNEL_VERSION(2, 1, 7)
-static const char version[] = "2.1.7";
-
 MODULE_AUTHOR("Michel Xhaard <mxhaard@users.sourceforge.net>");
 MODULE_DESCRIPTION("GSPCA/SPCA505 USB Camera Driver");
 MODULE_LICENSE("GPL");
@@ -34,10 +31,6 @@ MODULE_LICENSE("GPL");
 struct sd {
 	struct gspca_dev gspca_dev;		/* !! must be the first item */
 
-	int buflen;
-	unsigned char tmpbuf[640 * 480 * 3 / 2]; /* YYUV per line */
-	unsigned char tmpbuf2[640 * 480 * 2];	/* YUYV */
-
 	unsigned char brightness;
 
 	char subtype;
@@ -67,29 +60,29 @@ static struct ctrl sd_ctrls[] = {
 };
 
 static struct v4l2_pix_format vga_mode[] = {
-	{160, 120, V4L2_PIX_FMT_YUYV, V4L2_FIELD_NONE,
-		.bytesperline = 160 * 2,
-		.sizeimage = 160 * 120 * 2,
+	{160, 120, V4L2_PIX_FMT_SPCA505, V4L2_FIELD_NONE,
+		.bytesperline = 160,
+		.sizeimage = 160 * 120 * 3 / 2,
 		.colorspace = V4L2_COLORSPACE_SRGB,
 		.priv = 5},
-	{176, 144, V4L2_PIX_FMT_YUYV, V4L2_FIELD_NONE,
-		.bytesperline = 176 * 2,
-		.sizeimage = 176 * 144 * 2,
+	{176, 144, V4L2_PIX_FMT_SPCA505, V4L2_FIELD_NONE,
+		.bytesperline = 176,
+		.sizeimage = 176 * 144 * 3 / 2,
 		.colorspace = V4L2_COLORSPACE_SRGB,
 		.priv = 4},
-	{320, 240, V4L2_PIX_FMT_YUYV, V4L2_FIELD_NONE,
-		.bytesperline = 320 * 2,
-		.sizeimage = 320 * 240 * 2,
+	{320, 240, V4L2_PIX_FMT_SPCA505, V4L2_FIELD_NONE,
+		.bytesperline = 320,
+		.sizeimage = 320 * 240 * 3 / 2,
 		.colorspace = V4L2_COLORSPACE_SRGB,
 		.priv = 2},
-	{352, 288, V4L2_PIX_FMT_YUYV, V4L2_FIELD_NONE,
-		.bytesperline = 352 * 2,
-		.sizeimage = 352 * 288 * 2,
+	{352, 288, V4L2_PIX_FMT_SPCA505, V4L2_FIELD_NONE,
+		.bytesperline = 352,
+		.sizeimage = 352 * 288 * 3 / 2,
 		.colorspace = V4L2_COLORSPACE_SRGB,
 		.priv = 1},
-	{640, 480, V4L2_PIX_FMT_YUYV, V4L2_FIELD_NONE,
-		.bytesperline = 640 * 2,
-		.sizeimage = 640 * 480 * 2,
+	{640, 480, V4L2_PIX_FMT_SPCA505, V4L2_FIELD_NONE,
+		.bytesperline = 640,
+		.sizeimage = 640 * 480 * 3 / 2,
 		.colorspace = V4L2_COLORSPACE_SRGB,
 		.priv = 0},
 };
@@ -641,33 +634,11 @@ static int sd_config(struct gspca_dev *gspca_dev,
 {
 	struct sd *sd = (struct sd *) gspca_dev;
 	struct cam *cam;
-	__u16 vendor;
-	__u16 product;
-
-	vendor = id->idVendor;
-	product = id->idProduct;
-	switch (vendor) {
-	case 0x041e:		/* Creative cameras */
-/*		switch (product) { */
-/*		case 0x401d:	 * here505b */
-			sd->subtype = Nxultra;
-/*			break; */
-/*		} */
-		break;
-	case 0x0733:	/* Rebadged ViewQuest (Intel) and ViewQuest cameras */
-/*		switch (product) { */
-/*		case 0x0430: */
-/*		fixme: may be UsbGrabberPV321 BRIDGE_SPCA506 SENSOR_SAA7113 */
-			sd->subtype = IntelPCCameraPro;
-/*			break; */
-/*		} */
-		break;
-	}
 
 	cam = &gspca_dev->cam;
-	cam->dev_name = (char *) id->driver_info;
 	cam->epaddr = 0x01;
 	cam->cam_mode = vga_mode;
+	sd->subtype = id->driver_info;
 	if (sd->subtype != IntelPCCameraPro)
 		cam->nmodes = sizeof vga_mode / sizeof vga_mode[0];
 	else			/* no 640x480 for IntelPCCameraPro */
@@ -785,77 +756,30 @@ static void sd_close(struct gspca_dev *gspca_dev)
 	reg_write(gspca_dev->dev, 0x05, 0x11, 0xf);
 }
 
-/* convert YYUV per line to YUYV (YUV 4:2:2) */
-static void yyuv_decode(unsigned char *out,
-			unsigned char *in,
-			int width,
-			int height)
-{
-	unsigned char *Ui, *Vi, *yi, *yi1;
-	unsigned char *out1;
-	int i, j;
-
-	yi = in;
-	for (i = height / 2; --i >= 0; ) {
-		out1 = out + width * 2;		/* next line */
-		yi1 = yi + width;
-		Ui = yi1 + width;
-		Vi = Ui + width / 2;
-		for (j = width / 2; --j >= 0; ) {
-			*out++ = 128 + *yi++;
-			*out++ = 128 + *Ui;
-			*out++ = 128 + *yi++;
-			*out++ = 128 + *Vi;
-
-			*out1++ = 128 + *yi1++;
-			*out1++ = 128 + *Ui++;
-			*out1++ = 128 + *yi1++;
-			*out1++ = 128 + *Vi++;
-		}
-		yi += width * 2;
-		out = out1;
-	}
-}
-
 static void sd_pkt_scan(struct gspca_dev *gspca_dev,
 			struct gspca_frame *frame,	/* target */
 			__u8 *data,			/* isoc packet */
 			int len)			/* iso packet length */
 {
-	struct sd *sd = (struct sd *) gspca_dev;
-
 	switch (data[0]) {
 	case 0:				/* start of frame */
-		if (gspca_dev->last_packet_type == FIRST_PACKET) {
-			yyuv_decode(sd->tmpbuf2, sd->tmpbuf,
-					gspca_dev->width,
-					gspca_dev->height);
-			frame = gspca_frame_add(gspca_dev,
-						LAST_PACKET,
-						frame,
-						sd->tmpbuf2,
-						gspca_dev->width
-							* gspca_dev->height
-							* 2);
-		}
-		gspca_frame_add(gspca_dev, FIRST_PACKET, frame,
-				data, 0);
+		frame = gspca_frame_add(gspca_dev, LAST_PACKET, frame,
+					data, 0);
 		data += SPCA50X_OFFSET_DATA;
 		len -= SPCA50X_OFFSET_DATA;
-		if (len > 0)
-			memcpy(sd->tmpbuf, data, len);
-		else
-			len = 0;
-		sd->buflen = len;
-		return;
+		gspca_frame_add(gspca_dev, FIRST_PACKET, frame,
+				data, len);
+		break;
 	case 0xff:			/* drop */
 /*		gspca_dev->last_packet_type = DISCARD_PACKET; */
-		return;
+		break;
+	default:
+		data += 1;
+		len -= 1;
+		gspca_frame_add(gspca_dev, INTER_PACKET, frame,
+				data, len);
+		break;
 	}
-	data += 1;
-	len -= 1;
-	memcpy(&sd->tmpbuf[sd->buflen], data, len);
-	sd->buflen += len;
 }
 
 static void setbrightness(struct gspca_dev *gspca_dev)
@@ -910,10 +834,10 @@ static const struct sd_desc sd_desc = {
 };
 
 /* -- module initialisation -- */
-#define DVNM(name) .driver_info = (kernel_ulong_t) name
 static const __devinitdata struct usb_device_id device_table[] = {
-	{USB_DEVICE(0x041e, 0x401d), DVNM("Creative Webcam NX ULTRA")},
-	{USB_DEVICE(0x0733, 0x0430), DVNM("Intel PC Camera Pro")},
+	{USB_DEVICE(0x041e, 0x401d), .driver_info = Nxultra},
+	{USB_DEVICE(0x0733, 0x0430), .driver_info = IntelPCCameraPro},
+/*fixme: may be UsbGrabberPV321 BRIDGE_SPCA506 SENSOR_SAA7113 */
 	{}
 };
 MODULE_DEVICE_TABLE(usb, device_table);
@@ -938,7 +862,7 @@ static int __init sd_mod_init(void)
 {
 	if (usb_register(&sd_driver) < 0)
 		return -1;
-	PDEBUG(D_PROBE, "v%s registered", version);
+	PDEBUG(D_PROBE, "registered");
 	return 0;
 }
 static void __exit sd_mod_exit(void)
diff --git a/drivers/media/video/gspca/spca506.c b/drivers/media/video/gspca/spca506.c
index 143203c1fd9f..f622fa75766d 100644
--- a/drivers/media/video/gspca/spca506.c
+++ b/drivers/media/video/gspca/spca506.c
@@ -25,9 +25,6 @@
 
 #include "gspca.h"
 
-#define DRIVER_VERSION_NUMBER	KERNEL_VERSION(2, 1, 7)
-static const char version[] = "2.1.7";
-
 MODULE_AUTHOR("Michel Xhaard <mxhaard@users.sourceforge.net>");
 MODULE_DESCRIPTION("GSPCA/SPCA506 USB Camera Driver");
 MODULE_LICENSE("GPL");
@@ -36,10 +33,6 @@ MODULE_LICENSE("GPL");
 struct sd {
 	struct gspca_dev gspca_dev;	/* !! must be the first item */
 
-	int buflen;
-	__u8 tmpbuf[640 * 480 * 3];	/* YYUV per line */
-	__u8 tmpbuf2[640 * 480 * 2];	/* YUYV */
-
 	unsigned char brightness;
 	unsigned char contrast;
 	unsigned char colors;
@@ -118,29 +111,29 @@ static struct ctrl sd_ctrls[] = {
 };
 
 static struct v4l2_pix_format vga_mode[] = {
-	{160, 120, V4L2_PIX_FMT_YUYV, V4L2_FIELD_NONE,
-		.bytesperline = 160 * 2,
-		.sizeimage = 160 * 120 * 2,
+	{160, 120, V4L2_PIX_FMT_SPCA505, V4L2_FIELD_NONE,
+		.bytesperline = 160,
+		.sizeimage = 160 * 120 * 3 / 2,
 		.colorspace = V4L2_COLORSPACE_SRGB,
 		.priv = 5},
-	{176, 144, V4L2_PIX_FMT_YUYV, V4L2_FIELD_NONE,
-		.bytesperline = 176 * 2,
-		.sizeimage = 176 * 144 * 2,
+	{176, 144, V4L2_PIX_FMT_SPCA505, V4L2_FIELD_NONE,
+		.bytesperline = 176,
+		.sizeimage = 176 * 144 * 3 / 2,
 		.colorspace = V4L2_COLORSPACE_SRGB,
 		.priv = 4},
-	{320, 240, V4L2_PIX_FMT_YUYV, V4L2_FIELD_NONE,
-		.bytesperline = 320 * 2,
-		.sizeimage = 320 * 240 * 2,
+	{320, 240, V4L2_PIX_FMT_SPCA505, V4L2_FIELD_NONE,
+		.bytesperline = 320,
+		.sizeimage = 320 * 240 * 3 / 2,
 		.colorspace = V4L2_COLORSPACE_SRGB,
 		.priv = 2},
-	{352, 288, V4L2_PIX_FMT_YUYV, V4L2_FIELD_NONE,
-		.bytesperline = 352 * 2,
-		.sizeimage = 352 * 288 * 2,
+	{352, 288, V4L2_PIX_FMT_SPCA505, V4L2_FIELD_NONE,
+		.bytesperline = 352,
+		.sizeimage = 352 * 288 * 3 / 2,
 		.colorspace = V4L2_COLORSPACE_SRGB,
 		.priv = 1},
-	{640, 480, V4L2_PIX_FMT_YUYV, V4L2_FIELD_NONE,
-		.bytesperline = 640 * 2,
-		.sizeimage = 640 * 480 * 2,
+	{640, 480, V4L2_PIX_FMT_SPCA505, V4L2_FIELD_NONE,
+		.bytesperline = 640,
+		.sizeimage = 640 * 480 * 3 / 2,
 		.colorspace = V4L2_COLORSPACE_SRGB,
 		.priv = 0},
 };
@@ -310,7 +303,6 @@ static int sd_config(struct gspca_dev *gspca_dev,
 	struct cam *cam;
 
 	cam = &gspca_dev->cam;
-	cam->dev_name = (char *) id->driver_info;
 	cam->epaddr = 0x01;
 	cam->cam_mode = vga_mode;
 	cam->nmodes = sizeof vga_mode / sizeof vga_mode[0];
@@ -576,77 +568,30 @@ static void sd_close(struct gspca_dev *gspca_dev)
 {
 }
 
-/* convert YYUV per line to YUYV (YUV 4:2:2) */
-static void yyuv_decode(unsigned char *out,
-			unsigned char *in,
-			int width,
-			int height)
-{
-	unsigned char *Ui, *Vi, *yi, *yi1;
-	unsigned char *out1;
-	int i, j;
-
-	yi = in;
-	for (i = height / 2; --i >= 0; ) {
-		out1 = out + width * 2;		/* next line */
-		yi1 = yi + width;
-		Ui = yi1 + width;
-		Vi = Ui + width / 2;
-		for (j = width / 2; --j >= 0; ) {
-			*out++ = 128 + *yi++;
-			*out++ = 128 + *Ui;
-			*out++ = 128 + *yi++;
-			*out++ = 128 + *Vi;
-
-			*out1++ = 128 + *yi1++;
-			*out1++ = 128 + *Ui++;
-			*out1++ = 128 + *yi1++;
-			*out1++ = 128 + *Vi++;
-		}
-		yi += width * 2;
-		out = out1;
-	}
-}
-
 static void sd_pkt_scan(struct gspca_dev *gspca_dev,
 			struct gspca_frame *frame,	/* target */
 			__u8 *data,			/* isoc packet */
 			int len)			/* iso packet length */
 {
-	struct sd *sd = (struct sd *) gspca_dev;
-
 	switch (data[0]) {
 	case 0:				/* start of frame */
-		if (gspca_dev->last_packet_type == FIRST_PACKET) {
-			yyuv_decode(sd->tmpbuf2, sd->tmpbuf,
-					gspca_dev->width,
-					gspca_dev->height);
-			frame = gspca_frame_add(gspca_dev,
-						LAST_PACKET,
-						frame,
-						sd->tmpbuf2,
-						gspca_dev->width
-							* gspca_dev->height
-							* 2);
-		}
-		gspca_frame_add(gspca_dev, FIRST_PACKET, frame,
-				data, 0);
+		frame = gspca_frame_add(gspca_dev, LAST_PACKET, frame,
+					data, 0);
 		data += SPCA50X_OFFSET_DATA;
 		len -= SPCA50X_OFFSET_DATA;
-		if (len > 0)
-			memcpy(sd->tmpbuf, data, len);
-		else
-			len = 0;
-		sd->buflen = len;
-		return;
+		gspca_frame_add(gspca_dev, FIRST_PACKET, frame,
+				data, len);
+		break;
 	case 0xff:			/* drop */
 /*		gspca_dev->last_packet_type = DISCARD_PACKET; */
-		return;
+		break;
+	default:
+		data += 1;
+		len -= 1;
+		gspca_frame_add(gspca_dev, INTER_PACKET, frame,
+				data, len);
+		break;
 	}
-	data += 1;
-	len -= 1;
-	memcpy(&sd->tmpbuf[sd->buflen], data, len);
-	sd->buflen += len;
 }
 
 static void setbrightness(struct gspca_dev *gspca_dev)
@@ -804,12 +749,12 @@ static struct sd_desc sd_desc = {
 };
 
 /* -- module initialisation -- */
-#define DVNM(name) .driver_info = (kernel_ulong_t) name
 static __devinitdata struct usb_device_id device_table[] = {
-	{USB_DEVICE(0x06e1, 0xa190), DVNM("ADS Instant VCD")},
-/*	{USB_DEVICE(0x0733, 0x0430), DVNM("UsbGrabber PV321c")}, */
-	{USB_DEVICE(0x0734, 0x043b), DVNM("3DeMon USB Capture aka")},
-	{USB_DEVICE(0x99fa, 0x8988), DVNM("Grandtec V.cap")},
+	{USB_DEVICE(0x06e1, 0xa190)},
+/*fixme: may be IntelPCCameraPro BRIDGE_SPCA505
+	{USB_DEVICE(0x0733, 0x0430)}, */
+	{USB_DEVICE(0x0734, 0x043b)},
+	{USB_DEVICE(0x99fa, 0x8988)},
 	{}
 };
 MODULE_DEVICE_TABLE(usb, device_table);
@@ -834,7 +779,7 @@ static int __init sd_mod_init(void)
 {
 	if (usb_register(&sd_driver) < 0)
 		return -1;
-	PDEBUG(D_PROBE, "v%s registered", version);
+	PDEBUG(D_PROBE, "registered");
 	return 0;
 }
 static void __exit sd_mod_exit(void)
diff --git a/drivers/media/video/gspca/spca508.c b/drivers/media/video/gspca/spca508.c
index d8cd93866a4a..699340c17dea 100644
--- a/drivers/media/video/gspca/spca508.c
+++ b/drivers/media/video/gspca/spca508.c
@@ -22,9 +22,6 @@
 
 #include "gspca.h"
 
-#define DRIVER_VERSION_NUMBER	KERNEL_VERSION(2, 1, 7)
-static const char version[] = "2.1.7";
-
 MODULE_AUTHOR("Michel Xhaard <mxhaard@users.sourceforge.net>");
 MODULE_DESCRIPTION("GSPCA/SPCA508 USB Camera Driver");
 MODULE_LICENSE("GPL");
@@ -33,10 +30,6 @@ MODULE_LICENSE("GPL");
 struct sd {
 	struct gspca_dev gspca_dev;		/* !! must be the first item */
 
-	int buflen;
-	unsigned char tmpbuf[352 * 288 * 3 / 2]; /* YUVY per line */
-	unsigned char tmpbuf2[352 * 288 * 2];	/* YUYV */
-
 	unsigned char brightness;
 
 	char subtype;
@@ -70,24 +63,24 @@ static struct ctrl sd_ctrls[] = {
 };
 
 static struct v4l2_pix_format sif_mode[] = {
-	{160, 120, V4L2_PIX_FMT_YUYV, V4L2_FIELD_NONE,
-		.bytesperline = 160 * 2,
-		.sizeimage = 160 * 120 * 2,
+	{160, 120, V4L2_PIX_FMT_SPCA508, V4L2_FIELD_NONE,
+		.bytesperline = 160,
+		.sizeimage = 160 * 120 * 3 / 2,
 		.colorspace = V4L2_COLORSPACE_SRGB,
 		.priv = 3},
-	{176, 144, V4L2_PIX_FMT_YUYV, V4L2_FIELD_NONE,
-		.bytesperline = 176 * 2,
-		.sizeimage = 176 * 144 * 2,
+	{176, 144, V4L2_PIX_FMT_SPCA508, V4L2_FIELD_NONE,
+		.bytesperline = 176,
+		.sizeimage = 176 * 144 * 3 / 2,
 		.colorspace = V4L2_COLORSPACE_SRGB,
 		.priv = 2},
-	{320, 240, V4L2_PIX_FMT_YUYV, V4L2_FIELD_NONE,
-		.bytesperline = 320 * 2,
-		.sizeimage = 320 * 240 * 2,
+	{320, 240, V4L2_PIX_FMT_SPCA508, V4L2_FIELD_NONE,
+		.bytesperline = 320,
+		.sizeimage = 320 * 240 * 3 / 2,
 		.colorspace = V4L2_COLORSPACE_SRGB,
 		.priv = 1},
-	{352, 288, V4L2_PIX_FMT_YUYV, V4L2_FIELD_NONE,
-		.bytesperline = 352 * 2,
-		.sizeimage = 352 * 288 * 2,
+	{352, 288, V4L2_PIX_FMT_SPCA508, V4L2_FIELD_NONE,
+		.bytesperline = 352,
+		.sizeimage = 352 * 288 * 3 / 2,
 		.colorspace = V4L2_COLORSPACE_SRGB,
 		.priv = 0},
 };
@@ -1476,58 +1469,8 @@ static int sd_config(struct gspca_dev *gspca_dev,
 {
 	struct sd *sd = (struct sd *) gspca_dev;
 	struct cam *cam;
-	__u16 product;
 	int data1, data2;
 
-	product = id->idProduct;
-	switch (id->idVendor) {
-	case 0x0130:		/* Clone webcam */
-/*		switch (product) { */
-/*		case 0x0130: */
-			sd->subtype = HamaUSBSightcam;	/* same as Hama 0010 */
-/*			break; */
-/*		} */
-		break;
-	case 0x041e:		/* Creative cameras */
-/*		switch (product) { */
-/*		case 0x4018: */
-			sd->subtype = CreativeVista;
-/*			break; */
-/*		} */
-		break;
-	case 0x0461:		/* MicroInnovation */
-/*		switch (product) { */
-/*		case 0x0815: */
-			sd->subtype = MicroInnovationIC200;
-/*			break; */
-/*		} */
-		break;
-	case 0x0733:	/* Rebadged ViewQuest (Intel) and ViewQuest cameras */
-/*		switch (product) { */
-/*		case 0x110: */
-			sd->subtype = ViewQuestVQ110;
-/*			break; */
-/*		} */
-		break;
-	case 0x0af9:		/* Hama cameras */
-		switch (product) {
-		case 0x0010:
-			sd->subtype = HamaUSBSightcam;
-			break;
-		case 0x0011:
-			sd->subtype = HamaUSBSightcam2;
-			break;
-		}
-		break;
-	case 0x8086:		/* Intel */
-/*		switch (product) { */
-/*		case 0x0110: */
-			sd->subtype = IntelEasyPCCamera;
-/*			break; */
-/*		} */
-		break;
-	}
-
 	/* Read from global register the USB product and vendor IDs, just to
 	 * prove that we can communicate with the device.  This works, which
 	 * confirms at we are communicating properly and that the device
@@ -1544,10 +1487,11 @@ static int sd_config(struct gspca_dev *gspca_dev,
 	PDEBUG(D_PROBE, "Window 1 average luminance: %d", data1);
 
 	cam = &gspca_dev->cam;
-	cam->dev_name = (char *) id->driver_info;
 	cam->epaddr = 0x01;
 	cam->cam_mode = sif_mode;
 	cam->nmodes = ARRAY_SIZE(sif_mode);
+
+	sd->subtype = id->driver_info;
 	sd->brightness = BRIGHTNESS_DEF;
 
 	switch (sd->subtype) {
@@ -1619,77 +1563,30 @@ static void sd_close(struct gspca_dev *gspca_dev)
 {
 }
 
-/* convert YUVY per line to YUYV (YUV 4:2:2) */
-static void yuvy_decode(unsigned char *out,
-			unsigned char *in,
-			int width,
-			int height)
-{
-	unsigned char *Ui, *Vi, *yi, *yi1;
-	unsigned char *out1;
-	int i, j;
-
-	yi = in;
-	for (i = height / 2; --i >= 0; ) {
-		out1 = out + width * 2;		/* next line */
-		Ui = yi + width;
-		Vi = Ui + width / 2;
-		yi1 = Vi + width / 2;
-		for (j = width / 2; --j >= 0; ) {
-			*out++ = 128 + *yi++;
-			*out++ = 128 + *Ui;
-			*out++ = 128 + *yi++;
-			*out++ = 128 + *Vi;
-
-			*out1++ = 128 + *yi1++;
-			*out1++ = 128 + *Ui++;
-			*out1++ = 128 + *yi1++;
-			*out1++ = 128 + *Vi++;
-		}
-		yi += width * 2;
-		out = out1;
-	}
-}
-
 static void sd_pkt_scan(struct gspca_dev *gspca_dev,
 			struct gspca_frame *frame,	/* target */
 			__u8 *data,			/* isoc packet */
 			int len)			/* iso packet length */
 {
-	struct sd *sd = (struct sd *) gspca_dev;
-
 	switch (data[0]) {
 	case 0:				/* start of frame */
-		if (gspca_dev->last_packet_type == FIRST_PACKET) {
-			yuvy_decode(sd->tmpbuf2, sd->tmpbuf,
-					gspca_dev->width,
-					gspca_dev->height);
-			frame = gspca_frame_add(gspca_dev,
-						LAST_PACKET,
-						frame,
-						sd->tmpbuf2,
-						gspca_dev->width
-							* gspca_dev->height
-							* 2);
-		}
-		gspca_frame_add(gspca_dev, FIRST_PACKET, frame,
-				data, 0);
+		frame = gspca_frame_add(gspca_dev, LAST_PACKET, frame,
+					data, 0);
 		data += SPCA508_OFFSET_DATA;
 		len -= SPCA508_OFFSET_DATA;
-		if (len > 0)
-			memcpy(sd->tmpbuf, data, len);
-		else
-			len = 0;
-		sd->buflen = len;
-		return;
+		gspca_frame_add(gspca_dev, FIRST_PACKET, frame,
+				data, len);
+		break;
 	case 0xff:			/* drop */
 /*		gspca_dev->last_packet_type = DISCARD_PACKET; */
-		return;
+		break;
+	default:
+		data += 1;
+		len -= 1;
+		gspca_frame_add(gspca_dev, INTER_PACKET, frame,
+				data, len);
+		break;
 	}
-	data += 1;
-	len -= 1;
-	memcpy(&sd->tmpbuf[sd->buflen], data, len);
-	sd->buflen += len;
 }
 
 static void setbrightness(struct gspca_dev *gspca_dev)
@@ -1745,15 +1642,14 @@ static const struct sd_desc sd_desc = {
 };
 
 /* -- module initialisation -- */
-#define DVNM(name) .driver_info = (kernel_ulong_t) name
 static const __devinitdata struct usb_device_id device_table[] = {
-	{USB_DEVICE(0x0130, 0x0130), DVNM("Clone Digital Webcam 11043")},
-	{USB_DEVICE(0x041e, 0x4018), DVNM("Creative Webcam Vista (PD1100)")},
-	{USB_DEVICE(0x0461, 0x0815), DVNM("Micro Innovation IC200")},
-	{USB_DEVICE(0x0733, 0x0110), DVNM("ViewQuest VQ110")},
-	{USB_DEVICE(0x0af9, 0x0010), DVNM("Hama USB Sightcam 100")},
-	{USB_DEVICE(0x0af9, 0x0011), DVNM("Hama USB Sightcam 100")},
-	{USB_DEVICE(0x8086, 0x0110), DVNM("Intel Easy PC Camera")},
+	{USB_DEVICE(0x0130, 0x0130), .driver_info = HamaUSBSightcam},
+	{USB_DEVICE(0x041e, 0x4018), .driver_info = CreativeVista},
+	{USB_DEVICE(0x0461, 0x0815), .driver_info = MicroInnovationIC200},
+	{USB_DEVICE(0x0733, 0x0110), .driver_info = ViewQuestVQ110},
+	{USB_DEVICE(0x0af9, 0x0010), .driver_info = HamaUSBSightcam},
+	{USB_DEVICE(0x0af9, 0x0011), .driver_info = HamaUSBSightcam2},
+	{USB_DEVICE(0x8086, 0x0110), .driver_info = IntelEasyPCCamera},
 	{}
 };
 MODULE_DEVICE_TABLE(usb, device_table);
@@ -1778,7 +1674,7 @@ static int __init sd_mod_init(void)
 {
 	if (usb_register(&sd_driver) < 0)
 		return -1;
-	PDEBUG(D_PROBE, "v%s registered", version);
+	PDEBUG(D_PROBE, "registered");
 	return 0;
 }
 static void __exit sd_mod_exit(void)
diff --git a/drivers/media/video/gspca/spca561.c b/drivers/media/video/gspca/spca561.c
index b659bd0f788d..1073ac3d2ec6 100644
--- a/drivers/media/video/gspca/spca561.c
+++ b/drivers/media/video/gspca/spca561.c
@@ -24,9 +24,6 @@
 
 #include "gspca.h"
 
-#define DRIVER_VERSION_NUMBER	KERNEL_VERSION(2, 1, 7)
-static const char version[] = "2.1.7";
-
 MODULE_AUTHOR("Michel Xhaard <mxhaard@users.sourceforge.net>");
 MODULE_DESCRIPTION("GSPCA/SPCA561 USB Camera Driver");
 MODULE_LICENSE("GPL");
@@ -582,35 +579,15 @@ static int sd_config(struct gspca_dev *gspca_dev,
 		PDEBUG(D_PROBE, "Bad vendor / product from device");
 		return -EINVAL;
 	}
-	switch (product) {
-	case 0x0928:
-	case 0x0929:
-	case 0x092a:
-	case 0x092b:
-	case 0x092c:
-	case 0x092d:
-	case 0x092e:
-	case 0x092f:
-	case 0x403b:
-		sd->chip_revision = Rev012A;
-		break;
-	default:
-/*	case 0x0561:
-	case 0x0815:			* ?? in spca508.c
-	case 0x401a:
-	case 0x7004:
-	case 0x7e50:
-	case 0xa001:
-	case 0xcdee: */
-		sd->chip_revision = Rev072A;
-		break;
-	}
+
 	cam = &gspca_dev->cam;
 	cam->dev_name = (char *) id->driver_info;
 	cam->epaddr = 0x01;
 	gspca_dev->nbalt = 7 + 1;	/* choose alternate 7 first */
 	cam->cam_mode = sif_mode;
 	cam->nmodes = sizeof sif_mode / sizeof sif_mode[0];
+
+	sd->chip_revision = id->driver_info;
 	sd->brightness = sd_ctrls[SD_BRIGHTNESS].qctrl.default_value;
 	sd->contrast = sd_ctrls[SD_CONTRAST].qctrl.default_value;
 	sd->autogain = sd_ctrls[SD_AUTOGAIN].qctrl.default_value;
@@ -667,6 +644,18 @@ static void setcontrast(struct gspca_dev *gspca_dev)
 	}
 }
 
+static void setautogain(struct gspca_dev *gspca_dev)
+{
+	struct sd *sd = (struct sd *) gspca_dev;
+
+	if (sd->chip_revision == Rev072A) {
+		if (sd->autogain)
+			sd->ag_cnt = AG_CNT_START;
+		else
+			sd->ag_cnt = -1;
+	}
+}
+
 static void sd_start(struct gspca_dev *gspca_dev)
 {
 	struct sd *sd = (struct sd *) gspca_dev;
@@ -694,6 +683,7 @@ static void sd_start(struct gspca_dev *gspca_dev)
 		reg_w_val(dev, 0x8500, mode);	/* mode */
 		reg_w_val(dev, 0x8700, Clck);	/* 0x27 clock */
 		reg_w_val(dev, 0x8112, 0x10 | 0x20);
+		setautogain(gspca_dev);
 		break;
 	default:
 /*	case Rev012A: */
@@ -743,18 +733,24 @@ static void sd_close(struct gspca_dev *gspca_dev)
 	reg_w_val(gspca_dev->dev, 0x8114, 0);
 }
 
-static void setautogain(struct gspca_dev *gspca_dev)
+static void do_autogain(struct gspca_dev *gspca_dev)
 {
 	struct sd *sd = (struct sd *) gspca_dev;
-	int expotimes = 0;
-	int pixelclk = 0;
-	int gainG = 0;
+	int expotimes;
+	int pixelclk;
+	int gainG;
 	__u8 R, Gr, Gb, B;
 	int y;
 	__u8 luma_mean = 110;
 	__u8 luma_delta = 20;
 	__u8 spring = 4;
 
+	if (sd->ag_cnt < 0)
+		return;
+	if (--sd->ag_cnt >= 0)
+		return;
+	sd->ag_cnt = AG_CNT_START;
+
 	switch (sd->chip_revision) {
 	case Rev072A:
 		reg_r(gspca_dev, 0x8621, 1);
@@ -818,18 +814,10 @@ static void sd_pkt_scan(struct gspca_dev *gspca_dev,
 			__u8 *data,		/* isoc packet */
 			int len)		/* iso packet length */
 {
-	struct sd *sd = (struct sd *) gspca_dev;
-
 	switch (data[0]) {
 	case 0:		/* start of frame */
 		frame = gspca_frame_add(gspca_dev, LAST_PACKET, frame,
 					data, 0);
-		if (sd->ag_cnt >= 0) {
-			if (--sd->ag_cnt < 0) {
-				sd->ag_cnt = AG_CNT_START;
-				setautogain(gspca_dev);
-			}
-		}
 		data += SPCA561_OFFSET_DATA;
 		len -= SPCA561_OFFSET_DATA;
 		if (data[1] & 0x10) {
@@ -967,10 +955,8 @@ static int sd_setautogain(struct gspca_dev *gspca_dev, __s32 val)
 	struct sd *sd = (struct sd *) gspca_dev;
 
 	sd->autogain = val;
-	if (val)
-		sd->ag_cnt = AG_CNT_START;
-	else
-		sd->ag_cnt = -1;
+	if (gspca_dev->streaming)
+		setautogain(gspca_dev);
 	return 0;
 }
 
@@ -994,26 +980,26 @@ static const struct sd_desc sd_desc = {
 	.stop0 = sd_stop0,
 	.close = sd_close,
 	.pkt_scan = sd_pkt_scan,
+	.dq_callback = do_autogain,
 };
 
 /* -- module initialisation -- */
-#define DVNM(name) .driver_info = (kernel_ulong_t) name
 static const __devinitdata struct usb_device_id device_table[] = {
-	{USB_DEVICE(0x041e, 0x401a), DVNM("Creative Webcam Vista (PD1100)")},
-	{USB_DEVICE(0x041e, 0x403b),  DVNM("Creative Webcam Vista (VF0010)")},
-	{USB_DEVICE(0x0458, 0x7004), DVNM("Genius VideoCAM Express V2")},
-	{USB_DEVICE(0x046d, 0x0928), DVNM("Logitech QC Express Etch2")},
-	{USB_DEVICE(0x046d, 0x0929), DVNM("Labtec Webcam Elch2")},
-	{USB_DEVICE(0x046d, 0x092a), DVNM("Logitech QC for Notebook")},
-	{USB_DEVICE(0x046d, 0x092b), DVNM("Labtec Webcam Plus")},
-	{USB_DEVICE(0x046d, 0x092c), DVNM("Logitech QC chat Elch2")},
-	{USB_DEVICE(0x046d, 0x092d), DVNM("Logitech QC Elch2")},
-	{USB_DEVICE(0x046d, 0x092e), DVNM("Logitech QC Elch2")},
-	{USB_DEVICE(0x046d, 0x092f), DVNM("Logitech QC Elch2")},
-	{USB_DEVICE(0x04fc, 0x0561), DVNM("Flexcam 100")},
-	{USB_DEVICE(0x060b, 0xa001), DVNM("Maxell Compact Pc PM3")},
-	{USB_DEVICE(0x10fd, 0x7e50), DVNM("FlyCam Usb 100")},
-	{USB_DEVICE(0xabcd, 0xcdee), DVNM("Petcam")},
+	{USB_DEVICE(0x041e, 0x401a), .driver_info = Rev072A},
+	{USB_DEVICE(0x041e, 0x403b), .driver_info = Rev012A},
+	{USB_DEVICE(0x0458, 0x7004), .driver_info = Rev072A},
+	{USB_DEVICE(0x046d, 0x0928), .driver_info = Rev012A},
+	{USB_DEVICE(0x046d, 0x0929), .driver_info = Rev012A},
+	{USB_DEVICE(0x046d, 0x092a), .driver_info = Rev012A},
+	{USB_DEVICE(0x046d, 0x092b), .driver_info = Rev012A},
+	{USB_DEVICE(0x046d, 0x092c), .driver_info = Rev012A},
+	{USB_DEVICE(0x046d, 0x092d), .driver_info = Rev012A},
+	{USB_DEVICE(0x046d, 0x092e), .driver_info = Rev012A},
+	{USB_DEVICE(0x046d, 0x092f), .driver_info = Rev012A},
+	{USB_DEVICE(0x04fc, 0x0561), .driver_info = Rev072A},
+	{USB_DEVICE(0x060b, 0xa001), .driver_info = Rev072A},
+	{USB_DEVICE(0x10fd, 0x7e50), .driver_info = Rev072A},
+	{USB_DEVICE(0xabcd, 0xcdee), .driver_info = Rev072A},
 	{}
 };
 
@@ -1039,7 +1025,7 @@ static int __init sd_mod_init(void)
 {
 	if (usb_register(&sd_driver) < 0)
 		return -1;
-	PDEBUG(D_PROBE, "v%s registered", version);
+	PDEBUG(D_PROBE, "registered");
 	return 0;
 }
 static void __exit sd_mod_exit(void)
diff --git a/drivers/media/video/gspca/stk014.c b/drivers/media/video/gspca/stk014.c
index c78ee0d3e59b..16219cf6a6d5 100644
--- a/drivers/media/video/gspca/stk014.c
+++ b/drivers/media/video/gspca/stk014.c
@@ -23,9 +23,6 @@
 #include "gspca.h"
 #include "jpeg.h"
 
-#define DRIVER_VERSION_NUMBER	KERNEL_VERSION(2, 1, 7)
-static const char version[] = "2.1.7";
-
 MODULE_AUTHOR("Jean-Francois Moine <http://moinejf.free.fr>");
 MODULE_DESCRIPTION("Syntek DV4000 (STK014) USB Camera Driver");
 MODULE_LICENSE("GPL");
@@ -299,7 +296,6 @@ static int sd_config(struct gspca_dev *gspca_dev,
 	struct sd *sd = (struct sd *) gspca_dev;
 	struct cam *cam = &gspca_dev->cam;
 
-	cam->dev_name = (char *) id->driver_info;
 	cam->epaddr = 0x02;
 	gspca_dev->cam.cam_mode = vga_mode;
 	gspca_dev->cam.nmodes = ARRAY_SIZE(vga_mode);
@@ -549,9 +545,8 @@ static const struct sd_desc sd_desc = {
 };
 
 /* -- module initialisation -- */
-#define DVNM(name) .driver_info = (kernel_ulong_t) name
 static const __devinitdata struct usb_device_id device_table[] = {
-	{USB_DEVICE(0x05e1, 0x0893), DVNM("Syntek DV4000")},
+	{USB_DEVICE(0x05e1, 0x0893)},
 	{}
 };
 MODULE_DEVICE_TABLE(usb, device_table);
@@ -576,7 +571,7 @@ static int __init sd_mod_init(void)
 {
 	if (usb_register(&sd_driver) < 0)
 		return -1;
-	info("v%s registered", version);
+	info("registered");
 	return 0;
 }
 static void __exit sd_mod_exit(void)
diff --git a/drivers/media/video/gspca/sunplus.c b/drivers/media/video/gspca/sunplus.c
index abd7bef9b3d1..54efa48bee01 100644
--- a/drivers/media/video/gspca/sunplus.c
+++ b/drivers/media/video/gspca/sunplus.c
@@ -24,9 +24,6 @@
 #include "gspca.h"
 #include "jpeg.h"
 
-#define DRIVER_VERSION_NUMBER	KERNEL_VERSION(2, 1, 8)
-static const char version[] = "2.1.8";
-
 MODULE_AUTHOR("Michel Xhaard <mxhaard@users.sourceforge.net>");
 MODULE_DESCRIPTION("GSPCA/SPCA5xx USB Camera Driver");
 MODULE_LICENSE("GPL");
@@ -804,229 +801,29 @@ static int sd_config(struct gspca_dev *gspca_dev,
 	struct sd *sd = (struct sd *) gspca_dev;
 	struct usb_device *dev = gspca_dev->dev;
 	struct cam *cam;
-	__u16 vendor;
-	__u16 product;
-	__u8 fw;
-
-	vendor = id->idVendor;
-	product = id->idProduct;
-	switch (vendor) {
-	case 0x041e:		/* Creative cameras */
-/*		switch (product) { */
-/*		case 0x400b: */
-/*		case 0x4012: */
-/*		case 0x4013: */
-/*			sd->bridge = BRIDGE_SPCA504C; */
-/*			break; */
-/*		} */
-		break;
-	case 0x0458:		/* Genius KYE cameras */
-/*		switch (product) { */
-/*		case 0x7006: */
-			sd->bridge = BRIDGE_SPCA504B;
-/*			break; */
-/*		} */
-		break;
-	case 0x0461:		/* MicroInnovation */
-/*		switch (product) { */
-/*		case 0x0821: */
-			sd->bridge = BRIDGE_SPCA533;
-/*			break; */
-/*		} */
-		break;
-	case 0x046d:		/* Logitech Labtec */
-		switch (product) {
-		case 0x0905:
-			sd->subtype = LogitechClickSmart820;
-			sd->bridge = BRIDGE_SPCA533;
-			break;
-		case 0x0960:
-			sd->subtype = LogitechClickSmart420;
-			sd->bridge = BRIDGE_SPCA504C;
-			break;
-		}
-		break;
-	case 0x0471:				/* Philips */
-/*		switch (product) { */
-/*		case 0x0322: */
-			sd->bridge = BRIDGE_SPCA504B;
-/*			break; */
-/*		} */
-		break;
-	case 0x04a5:		/* Benq */
-		switch (product) {
-		case 0x3003:
-			sd->bridge = BRIDGE_SPCA504B;
-			break;
-		case 0x3008:
-		case 0x300a:
-			sd->bridge = BRIDGE_SPCA533;
-			break;
-		}
-		break;
-	case 0x04f1:		/* JVC */
-/*		switch (product) { */
-/*		case 0x1001: */
-			sd->bridge = BRIDGE_SPCA504B;
-/*			break; */
-/*		} */
-		break;
-	case 0x04fc:		/* SunPlus */
-		switch (product) {
-		case 0x500c:
-			sd->bridge = BRIDGE_SPCA504B;
-			break;
-		case 0x504a:
+
+	cam = &gspca_dev->cam;
+	cam->epaddr = 0x01;
+
+	sd->bridge = id->driver_info >> 8;
+	sd->subtype = id->driver_info;
+
+	if (sd->subtype == AiptekMiniPenCam13) {
 /* try to get the firmware as some cam answer 2.0.1.2.2
  * and should be a spca504b then overwrite that setting */
-			reg_r(dev, 0x20, 0, gspca_dev->usb_buf, 1);
-			fw = gspca_dev->usb_buf[0];
-			if (fw == 1) {
-				sd->subtype = AiptekMiniPenCam13;
-				sd->bridge = BRIDGE_SPCA504;
-			} else if (fw == 2) {
-				sd->bridge = BRIDGE_SPCA504B;
-			} else
-				return -ENODEV;
-			break;
-		case 0x504b:
-			sd->bridge = BRIDGE_SPCA504B;
-			break;
-		case 0x5330:
-			sd->bridge = BRIDGE_SPCA533;
-			break;
-		case 0x5360:
-			sd->bridge = BRIDGE_SPCA536;
-			break;
-		case 0xffff:
-			sd->bridge = BRIDGE_SPCA504B;
-			break;
-		}
-		break;
-	case 0x052b:		/* ?? Megapix */
-/*		switch (product) { */
-/*		case 0x1513: */
-			sd->subtype = MegapixV4;
-			sd->bridge = BRIDGE_SPCA533;
-/*			break; */
-/*		} */
-		break;
-	case 0x0546:		/* Polaroid */
-		switch (product) {
-		case 0x3155:
-			sd->bridge = BRIDGE_SPCA533;
-			break;
-		case 0x3191:
-		case 0x3273:
-			sd->bridge = BRIDGE_SPCA504B;
-			break;
-		}
-		break;
-	case 0x055f:		/* Mustek cameras */
-		switch (product) {
-		case 0xc211:
-			sd->bridge = BRIDGE_SPCA536;
-			break;
-		case 0xc230:
-		case 0xc232:
-			sd->bridge = BRIDGE_SPCA533;
-			break;
-		case 0xc360:
-			sd->bridge = BRIDGE_SPCA536;
-			break;
-		case 0xc420:
-			sd->bridge = BRIDGE_SPCA504;
-			break;
-		case 0xc430:
-		case 0xc440:
-			sd->bridge = BRIDGE_SPCA533;
-			break;
-		case 0xc520:
-			sd->bridge = BRIDGE_SPCA504;
-			break;
-		case 0xc530:
-		case 0xc540:
-		case 0xc630:
-		case 0xc650:
-			sd->bridge = BRIDGE_SPCA533;
-			break;
-		}
-		break;
-	case 0x05da:		/* Digital Dream cameras */
-/*		switch (product) { */
-/*		case 0x1018: */
+		reg_r(dev, 0x20, 0, gspca_dev->usb_buf, 1);
+		switch (gspca_dev->usb_buf[0]) {
+		case 1:
+			break;		/* (right bridge/subtype) */
+		case 2:
 			sd->bridge = BRIDGE_SPCA504B;
-/*			break; */
-/*		} */
-		break;
-	case 0x06d6:		/* Trust */
-/*		switch (product) { */
-/*		case 0x0031: */
-			sd->bridge = BRIDGE_SPCA533;	/* SPCA533A */
-/*			break; */
-/*		} */
-		break;
-	case 0x0733:	/* Rebadged ViewQuest (Intel) and ViewQuest cameras */
-		switch (product) {
-		case 0x1311:
-		case 0x1314:
-		case 0x2211:
-		case 0x2221:
-			sd->bridge = BRIDGE_SPCA533;
-			break;
-		case 0x3261:
-		case 0x3281:
-			sd->bridge = BRIDGE_SPCA536;
-			break;
-		}
-		break;
-	case 0x08ca:		/* Aiptek */
-		switch (product) {
-		case 0x0104:
-		case 0x0106:
-			sd->bridge = BRIDGE_SPCA533;
-			break;
-		case 0x2008:
-			sd->bridge = BRIDGE_SPCA504B;
-			break;
-		case 0x2010:
-			sd->bridge = BRIDGE_SPCA533;
-			break;
-		case 0x2016:
-		case 0x2018:
-			sd->bridge = BRIDGE_SPCA504B;
-			break;
-		case 0x2020:
-		case 0x2022:
-			sd->bridge = BRIDGE_SPCA533;
-			break;
-		case 0x2024:
-			sd->bridge = BRIDGE_SPCA536;
-			break;
-		case 0x2028:
-			sd->bridge = BRIDGE_SPCA533;
-			break;
-		case 0x2040:
-		case 0x2042:
-		case 0x2050:
-		case 0x2060:
-			sd->bridge = BRIDGE_SPCA536;
+			sd->subtype = 0;
 			break;
+		default:
+			return -ENODEV;
 		}
-		break;
-	case 0x0d64:		/* SunPlus */
-/*		switch (product) { */
-/*		case 0x0303: */
-			sd->bridge = BRIDGE_SPCA536;
-/*			break; */
-/*		} */
-		break;
 	}
 
-	cam = &gspca_dev->cam;
-	cam->dev_name = (char *) id->driver_info;
-	cam->epaddr = 0x01;
-
 	switch (sd->bridge) {
 	default:
 /*	case BRIDGE_SPCA504B: */
@@ -1581,65 +1378,67 @@ static const struct sd_desc sd_desc = {
 };
 
 /* -- module initialisation -- */
-#define DVNM(name) .driver_info = (kernel_ulong_t) name
+#define BS(bridge, subtype) \
+	.driver_info = (BRIDGE_ ## bridge << 8) \
+			| (subtype)
 static const __devinitdata struct usb_device_id device_table[] = {
-	{USB_DEVICE(0x041e, 0x400b), DVNM("Creative PC-CAM 600")},
-	{USB_DEVICE(0x041e, 0x4012), DVNM("PC-Cam350")},
-	{USB_DEVICE(0x041e, 0x4013), DVNM("Creative Pccam750")},
-	{USB_DEVICE(0x0458, 0x7006), DVNM("Genius Dsc 1.3 Smart")},
-	{USB_DEVICE(0x0461, 0x0821), DVNM("Fujifilm MV-1")},
-	{USB_DEVICE(0x046d, 0x0905), DVNM("Logitech ClickSmart 820")},
-	{USB_DEVICE(0x046d, 0x0960), DVNM("Logitech ClickSmart 420")},
-	{USB_DEVICE(0x0471, 0x0322), DVNM("Philips DMVC1300K")},
-	{USB_DEVICE(0x04a5, 0x3003), DVNM("Benq DC 1300")},
-	{USB_DEVICE(0x04a5, 0x3008), DVNM("Benq DC 1500")},
-	{USB_DEVICE(0x04a5, 0x300a), DVNM("Benq DC3410")},
-	{USB_DEVICE(0x04f1, 0x1001), DVNM("JVC GC A50")},
-	{USB_DEVICE(0x04fc, 0x500c), DVNM("Sunplus CA500C")},
-	{USB_DEVICE(0x04fc, 0x504a), DVNM("Aiptek Mini PenCam 1.3")},
-	{USB_DEVICE(0x04fc, 0x504b), DVNM("Maxell MaxPocket LE 1.3")},
-	{USB_DEVICE(0x04fc, 0x5330), DVNM("Digitrex 2110")},
-	{USB_DEVICE(0x04fc, 0x5360), DVNM("Sunplus Generic")},
-	{USB_DEVICE(0x04fc, 0xffff), DVNM("Pure DigitalDakota")},
-	{USB_DEVICE(0x052b, 0x1513), DVNM("Megapix V4")},
-	{USB_DEVICE(0x0546, 0x3155), DVNM("Polaroid PDC3070")},
-	{USB_DEVICE(0x0546, 0x3191), DVNM("Polaroid Ion 80")},
-	{USB_DEVICE(0x0546, 0x3273), DVNM("Polaroid PDC2030")},
-	{USB_DEVICE(0x055f, 0xc211), DVNM("Kowa Bs888e Microcamera")},
-	{USB_DEVICE(0x055f, 0xc230), DVNM("Mustek Digicam 330K")},
-	{USB_DEVICE(0x055f, 0xc232), DVNM("Mustek MDC3500")},
-	{USB_DEVICE(0x055f, 0xc360), DVNM("Mustek DV4000 Mpeg4 ")},
-	{USB_DEVICE(0x055f, 0xc420), DVNM("Mustek gSmart Mini 2")},
-	{USB_DEVICE(0x055f, 0xc430), DVNM("Mustek Gsmart LCD 2")},
-	{USB_DEVICE(0x055f, 0xc440), DVNM("Mustek DV 3000")},
-	{USB_DEVICE(0x055f, 0xc520), DVNM("Mustek gSmart Mini 3")},
-	{USB_DEVICE(0x055f, 0xc530), DVNM("Mustek Gsmart LCD 3")},
-	{USB_DEVICE(0x055f, 0xc540), DVNM("Gsmart D30")},
-	{USB_DEVICE(0x055f, 0xc630), DVNM("Mustek MDC4000")},
-	{USB_DEVICE(0x055f, 0xc650), DVNM("Mustek MDC5500Z")},
-	{USB_DEVICE(0x05da, 0x1018), DVNM("Digital Dream Enigma 1.3")},
-	{USB_DEVICE(0x06d6, 0x0031), DVNM("Trust 610 LCD PowerC@m Zoom")},
-	{USB_DEVICE(0x0733, 0x1311), DVNM("Digital Dream Epsilon 1.3")},
-	{USB_DEVICE(0x0733, 0x1314), DVNM("Mercury 2.1MEG Deluxe Classic Cam")},
-	{USB_DEVICE(0x0733, 0x2211), DVNM("Jenoptik jdc 21 LCD")},
-	{USB_DEVICE(0x0733, 0x2221), DVNM("Mercury Digital Pro 3.1p")},
-	{USB_DEVICE(0x0733, 0x3261), DVNM("Concord 3045 spca536a")},
-	{USB_DEVICE(0x0733, 0x3281), DVNM("Cyberpix S550V")},
-	{USB_DEVICE(0x08ca, 0x0104), DVNM("Aiptek PocketDVII 1.3")},
-	{USB_DEVICE(0x08ca, 0x0106), DVNM("Aiptek Pocket DV3100+")},
-	{USB_DEVICE(0x08ca, 0x2008), DVNM("Aiptek Mini PenCam 2 M")},
-	{USB_DEVICE(0x08ca, 0x2010), DVNM("Aiptek PocketCam 3M")},
-	{USB_DEVICE(0x08ca, 0x2016), DVNM("Aiptek PocketCam 2 Mega")},
-	{USB_DEVICE(0x08ca, 0x2018), DVNM("Aiptek Pencam SD 2M")},
-	{USB_DEVICE(0x08ca, 0x2020), DVNM("Aiptek Slim 3000F")},
-	{USB_DEVICE(0x08ca, 0x2022), DVNM("Aiptek Slim 3200")},
-	{USB_DEVICE(0x08ca, 0x2024), DVNM("Aiptek DV3500 Mpeg4 ")},
-	{USB_DEVICE(0x08ca, 0x2028), DVNM("Aiptek PocketCam4M")},
-	{USB_DEVICE(0x08ca, 0x2040), DVNM("Aiptek PocketDV4100M")},
-	{USB_DEVICE(0x08ca, 0x2042), DVNM("Aiptek PocketDV5100")},
-	{USB_DEVICE(0x08ca, 0x2050), DVNM("Medion MD 41437")},
-	{USB_DEVICE(0x08ca, 0x2060), DVNM("Aiptek PocketDV5300")},
-	{USB_DEVICE(0x0d64, 0x0303), DVNM("Sunplus FashionCam DXG")},
+	{USB_DEVICE(0x041e, 0x400b), BS(SPCA504C, 0)},
+	{USB_DEVICE(0x041e, 0x4012), BS(SPCA504C, 0)},
+	{USB_DEVICE(0x041e, 0x4013), BS(SPCA504C, 0)},
+	{USB_DEVICE(0x0458, 0x7006), BS(SPCA504B, 0)},
+	{USB_DEVICE(0x0461, 0x0821), BS(SPCA533, 0)},
+	{USB_DEVICE(0x046d, 0x0905), BS(SPCA533, LogitechClickSmart820)},
+	{USB_DEVICE(0x046d, 0x0960), BS(SPCA504C, LogitechClickSmart420)},
+	{USB_DEVICE(0x0471, 0x0322), BS(SPCA504B, 0)},
+	{USB_DEVICE(0x04a5, 0x3003), BS(SPCA504B, 0)},
+	{USB_DEVICE(0x04a5, 0x3008), BS(SPCA533, 0)},
+	{USB_DEVICE(0x04a5, 0x300a), BS(SPCA533, 0)},
+	{USB_DEVICE(0x04f1, 0x1001), BS(SPCA504B, 0)},
+	{USB_DEVICE(0x04fc, 0x500c), BS(SPCA504B, 0)},
+	{USB_DEVICE(0x04fc, 0x504a), BS(SPCA504, AiptekMiniPenCam13)},
+	{USB_DEVICE(0x04fc, 0x504b), BS(SPCA504B, 0)},
+	{USB_DEVICE(0x04fc, 0x5330), BS(SPCA533, 0)},
+	{USB_DEVICE(0x04fc, 0x5360), BS(SPCA536, 0)},
+	{USB_DEVICE(0x04fc, 0xffff), BS(SPCA504B, 0)},
+	{USB_DEVICE(0x052b, 0x1513), BS(SPCA533, MegapixV4)},
+	{USB_DEVICE(0x0546, 0x3155), BS(SPCA533, 0)},
+	{USB_DEVICE(0x0546, 0x3191), BS(SPCA504B, 0)},
+	{USB_DEVICE(0x0546, 0x3273), BS(SPCA504B, 0)},
+	{USB_DEVICE(0x055f, 0xc211), BS(SPCA536, 0)},
+	{USB_DEVICE(0x055f, 0xc230), BS(SPCA533, 0)},
+	{USB_DEVICE(0x055f, 0xc232), BS(SPCA533, 0)},
+	{USB_DEVICE(0x055f, 0xc360), BS(SPCA536, 0)},
+	{USB_DEVICE(0x055f, 0xc420), BS(SPCA504, 0)},
+	{USB_DEVICE(0x055f, 0xc430), BS(SPCA533, 0)},
+	{USB_DEVICE(0x055f, 0xc440), BS(SPCA533, 0)},
+	{USB_DEVICE(0x055f, 0xc520), BS(SPCA504, 0)},
+	{USB_DEVICE(0x055f, 0xc530), BS(SPCA533, 0)},
+	{USB_DEVICE(0x055f, 0xc540), BS(SPCA533, 0)},
+	{USB_DEVICE(0x055f, 0xc630), BS(SPCA533, 0)},
+	{USB_DEVICE(0x055f, 0xc650), BS(SPCA533, 0)},
+	{USB_DEVICE(0x05da, 0x1018), BS(SPCA504B, 0)},
+	{USB_DEVICE(0x06d6, 0x0031), BS(SPCA533, 0)},
+	{USB_DEVICE(0x0733, 0x1311), BS(SPCA533, 0)},
+	{USB_DEVICE(0x0733, 0x1314), BS(SPCA533, 0)},
+	{USB_DEVICE(0x0733, 0x2211), BS(SPCA533, 0)},
+	{USB_DEVICE(0x0733, 0x2221), BS(SPCA533, 0)},
+	{USB_DEVICE(0x0733, 0x3261), BS(SPCA536, 0)},
+	{USB_DEVICE(0x0733, 0x3281), BS(SPCA536, 0)},
+	{USB_DEVICE(0x08ca, 0x0104), BS(SPCA533, 0)},
+	{USB_DEVICE(0x08ca, 0x0106), BS(SPCA533, 0)},
+	{USB_DEVICE(0x08ca, 0x2008), BS(SPCA504B, 0)},
+	{USB_DEVICE(0x08ca, 0x2010), BS(SPCA533, 0)},
+	{USB_DEVICE(0x08ca, 0x2016), BS(SPCA504B, 0)},
+	{USB_DEVICE(0x08ca, 0x2018), BS(SPCA504B, 0)},
+	{USB_DEVICE(0x08ca, 0x2020), BS(SPCA533, 0)},
+	{USB_DEVICE(0x08ca, 0x2022), BS(SPCA533, 0)},
+	{USB_DEVICE(0x08ca, 0x2024), BS(SPCA536, 0)},
+	{USB_DEVICE(0x08ca, 0x2028), BS(SPCA533, 0)},
+	{USB_DEVICE(0x08ca, 0x2040), BS(SPCA536, 0)},
+	{USB_DEVICE(0x08ca, 0x2042), BS(SPCA536, 0)},
+	{USB_DEVICE(0x08ca, 0x2050), BS(SPCA536, 0)},
+	{USB_DEVICE(0x08ca, 0x2060), BS(SPCA536, 0)},
+	{USB_DEVICE(0x0d64, 0x0303), BS(SPCA536, 0)},
 	{}
 };
 MODULE_DEVICE_TABLE(usb, device_table);
@@ -1664,7 +1463,7 @@ static int __init sd_mod_init(void)
 {
 	if (usb_register(&sd_driver) < 0)
 		return -1;
-	PDEBUG(D_PROBE, "v%s registered", version);
+	PDEBUG(D_PROBE, "registered");
 	return 0;
 }
 static void __exit sd_mod_exit(void)
diff --git a/drivers/media/video/gspca/t613.c b/drivers/media/video/gspca/t613.c
index 00f47e463a05..91b555c34c68 100644
--- a/drivers/media/video/gspca/t613.c
+++ b/drivers/media/video/gspca/t613.c
@@ -1,12 +1,4 @@
 /*
- *Notes: * t613  + tas5130A
- *	* Focus to light do not balance well as in win.
- *	  Quality in win is not good, but its kinda better.
- *	 * Fix some "extraneous bytes", most of apps will show the image anyway
- *	 * Gamma table, is there, but its really doing something?
- *	 * 7~8 Fps, its ok, max on win its 10.
- *			Costantino Leandro
- *
  * V4L2 by Jean-Francois Moine <http://moinejf.free.fr>
  *
  * This program is free software; you can redistribute it and/or modify
@@ -22,16 +14,22 @@
  * You should have received a copy of the GNU General Public License
  * along with this program; if not, write to the Free Software
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ *Notes: * t613  + tas5130A
+ *	* Focus to light do not balance well as in win.
+ *	  Quality in win is not good, but its kinda better.
+ *	 * Fix some "extraneous bytes", most of apps will show the image anyway
+ *	 * Gamma table, is there, but its really doing something?
+ *	 * 7~8 Fps, its ok, max on win its 10.
+ *			Costantino Leandro
  */
 
 #define MODULE_NAME "t613"
+
 #include "gspca.h"
-#define DRIVER_VERSION_NUMBER	KERNEL_VERSION(2, 1, 7)
-static const char version[] = "2.1.7";
 
 #define MAX_GAMMA 0x10		/* 0 to 15 */
 
-/* From LUVCVIEW */
 #define V4L2_CID_EFFECTS (V4L2_CID_PRIVATE_BASE + 3)
 
 MODULE_AUTHOR("Leandro Costantino <le_costantino@pixartargentina.com.ar>");
@@ -424,7 +422,6 @@ static int sd_config(struct gspca_dev *gspca_dev,
 	struct cam *cam;
 
 	cam = &gspca_dev->cam;
-	cam->dev_name = (char *) id->driver_info;
 	cam->epaddr = 0x01;
 
 	cam->cam_mode = vga_mode_t16;
@@ -998,9 +995,8 @@ static const struct sd_desc sd_desc = {
 };
 
 /* -- module initialisation -- */
-#define DVNM(name) .driver_info = (kernel_ulong_t) name
 static const __devinitdata struct usb_device_id device_table[] = {
-	{USB_DEVICE(0x17a1, 0x0128), DVNM("XPX Webcam")},
+	{USB_DEVICE(0x17a1, 0x0128)},
 	{}
 };
 MODULE_DEVICE_TABLE(usb, device_table);
@@ -1025,7 +1021,7 @@ static int __init sd_mod_init(void)
 {
 	if (usb_register(&sd_driver) < 0)
 		return -1;
-	PDEBUG(D_PROBE, "v%s registered", version);
+	PDEBUG(D_PROBE, "registered");
 	return 0;
 }
 static void __exit sd_mod_exit(void)
diff --git a/drivers/media/video/gspca/tv8532.c b/drivers/media/video/gspca/tv8532.c
index 0b793899095f..1ff8ba2f7fe5 100644
--- a/drivers/media/video/gspca/tv8532.c
+++ b/drivers/media/video/gspca/tv8532.c
@@ -22,9 +22,6 @@
 
 #include "gspca.h"
 
-#define DRIVER_VERSION_NUMBER	KERNEL_VERSION(2, 1, 7)
-static const char version[] = "2.1.7";
-
 MODULE_AUTHOR("Michel Xhaard <mxhaard@users.sourceforge.net>");
 MODULE_DESCRIPTION("TV8532 USB Camera Driver");
 MODULE_LICENSE("GPL");
@@ -249,7 +246,6 @@ static int sd_config(struct gspca_dev *gspca_dev,
 	tv_8532WriteEEprom(gspca_dev);
 
 	cam = &gspca_dev->cam;
-	cam->dev_name = (char *) id->driver_info;
 	cam->epaddr = 1;
 	cam->cam_mode = sif_mode;
 	cam->nmodes = sizeof sif_mode / sizeof sif_mode[0];
@@ -624,13 +620,12 @@ static const struct sd_desc sd_desc = {
 };
 
 /* -- module initialisation -- */
-#define DVNM(name) .driver_info = (kernel_ulong_t) name
 static const __devinitdata struct usb_device_id device_table[] = {
-	{USB_DEVICE(0x046d, 0x0920), DVNM("QC Express")},
-	{USB_DEVICE(0x046d, 0x0921), DVNM("Labtec Webcam")},
-	{USB_DEVICE(0x0545, 0x808b), DVNM("Veo Stingray")},
-	{USB_DEVICE(0x0545, 0x8333), DVNM("Veo Stingray")},
-	{USB_DEVICE(0x0923, 0x010f), DVNM("ICM532 cams")},
+	{USB_DEVICE(0x046d, 0x0920)},
+	{USB_DEVICE(0x046d, 0x0921)},
+	{USB_DEVICE(0x0545, 0x808b)},
+	{USB_DEVICE(0x0545, 0x8333)},
+	{USB_DEVICE(0x0923, 0x010f)},
 	{}
 };
 
@@ -656,7 +651,7 @@ static int __init sd_mod_init(void)
 {
 	if (usb_register(&sd_driver) < 0)
 		return -1;
-	PDEBUG(D_PROBE, "v%s registered", version);
+	PDEBUG(D_PROBE, "registered");
 	return 0;
 }
 
diff --git a/drivers/media/video/gspca/vc032x.c b/drivers/media/video/gspca/vc032x.c
index fcf2c9e32573..f4a52956e0d9 100644
--- a/drivers/media/video/gspca/vc032x.c
+++ b/drivers/media/video/gspca/vc032x.c
@@ -24,9 +24,6 @@
 
 #include "gspca.h"
 
-#define DRIVER_VERSION_NUMBER	KERNEL_VERSION(2, 1, 7)
-static const char version[] = "2.1.7";
-
 MODULE_AUTHOR("Michel Xhaard <mxhaard@users.sourceforge.net>");
 MODULE_DESCRIPTION("GSPCA/VC032X USB Camera Driver");
 MODULE_LICENSE("GPL");
@@ -91,12 +88,12 @@ static struct ctrl sd_ctrls[] = {
 
 static struct v4l2_pix_format vc0321_mode[] = {
 	{320, 240, V4L2_PIX_FMT_YUV420, V4L2_FIELD_NONE,
-		.bytesperline = 320 * 2,
+		.bytesperline = 320,
 		.sizeimage = 320 * 240 * 2,
 		.colorspace = V4L2_COLORSPACE_SRGB,
 		.priv = 1},
 	{640, 480, V4L2_PIX_FMT_YUV420, V4L2_FIELD_NONE,
-		.bytesperline = 640 * 2,
+		.bytesperline = 640,
 		.sizeimage = 640 * 480 * 2,
 		.colorspace = V4L2_COLORSPACE_SRGB,
 		.priv = 0},
@@ -1419,30 +1416,10 @@ static int sd_config(struct gspca_dev *gspca_dev,
 	struct usb_device *dev = gspca_dev->dev;
 	struct cam *cam;
 	int sensor;
-	__u16 product;
-
-	product = id->idProduct;
-	sd->bridge = BRIDGE_VC0321;
-	switch (id->idVendor) {
-	case 0x0ac8:		/* Vimicro z-star */
-		switch (product) {
-		case 0x0323:
-			sd->bridge = BRIDGE_VC0323;
-			break;
-		}
-		break;
-	case 0x17ef:		/* Lenovo */
-/*		switch (product) { */
-/*		case 0x4802:	 * Lenovo MI1310_SOC */
-			sd->bridge = BRIDGE_VC0323;
-/*			break; */
-/*		} */
-		break;
-	}
 
 	cam = &gspca_dev->cam;
-	cam->dev_name = (char *) id->driver_info;
 	cam->epaddr = 0x02;
+	sd->bridge = id->driver_info;
 	if (sd->bridge == BRIDGE_VC0321) {
 		cam->cam_mode = vc0321_mode;
 		cam->nmodes = ARRAY_SIZE(vc0321_mode);
@@ -1771,16 +1748,15 @@ static const struct sd_desc sd_desc = {
 };
 
 /* -- module initialisation -- */
-#define DVNM(name) .driver_info = (kernel_ulong_t) name
 static const __devinitdata struct usb_device_id device_table[] = {
-	{USB_DEVICE(0x046d, 0x0892), DVNM("Logitech Orbicam")},
-	{USB_DEVICE(0x046d, 0x0896), DVNM("Logitech Orbicam")},
-	{USB_DEVICE(0x0ac8, 0x0321), DVNM("Vimicro generic vc0321")},
-	{USB_DEVICE(0x0ac8, 0x0323), DVNM("Vimicro Vc0323")},
-	{USB_DEVICE(0x0ac8, 0x0328), DVNM("A4Tech PK-130MG")},
-	{USB_DEVICE(0x0ac8, 0xc001), DVNM("Sony embedded vimicro")},
-	{USB_DEVICE(0x0ac8, 0xc002), DVNM("Sony embedded vimicro")},
-	{USB_DEVICE(0x17ef, 0x4802), DVNM("Lenovo Vc0323+MI1310_SOC")},
+	{USB_DEVICE(0x046d, 0x0892), .driver_info = BRIDGE_VC0321},
+	{USB_DEVICE(0x046d, 0x0896), .driver_info = BRIDGE_VC0321},
+	{USB_DEVICE(0x0ac8, 0x0321), .driver_info = BRIDGE_VC0321},
+	{USB_DEVICE(0x0ac8, 0x0323), .driver_info = BRIDGE_VC0323},
+	{USB_DEVICE(0x0ac8, 0x0328), .driver_info = BRIDGE_VC0321},
+	{USB_DEVICE(0x0ac8, 0xc001), .driver_info = BRIDGE_VC0321},
+	{USB_DEVICE(0x0ac8, 0xc002), .driver_info = BRIDGE_VC0321},
+	{USB_DEVICE(0x17ef, 0x4802), .driver_info = BRIDGE_VC0323},
 	{}
 };
 MODULE_DEVICE_TABLE(usb, device_table);
@@ -1805,7 +1781,7 @@ static int __init sd_mod_init(void)
 {
 	if (usb_register(&sd_driver) < 0)
 		return -1;
-	PDEBUG(D_PROBE, "v%s registered", version);
+	PDEBUG(D_PROBE, "registered");
 	return 0;
 }
 static void __exit sd_mod_exit(void)
diff --git a/drivers/media/video/gspca/zc3xx.c b/drivers/media/video/gspca/zc3xx.c
index b761b11c5c6a..bc7d0eedcd81 100644
--- a/drivers/media/video/gspca/zc3xx.c
+++ b/drivers/media/video/gspca/zc3xx.c
@@ -24,9 +24,6 @@
 
 #include "gspca.h"
 
-#define DRIVER_VERSION_NUMBER	KERNEL_VERSION(2, 1, 7)
-static const char version[] = "2.1.7";
-
 MODULE_AUTHOR("Michel Xhaard <mxhaard@users.sourceforge.net>, "
 		"Serge A. Suchkov <Serge.A.S@tochka.ru>");
 MODULE_DESCRIPTION("GSPCA ZC03xx/VC3xx USB Camera Driver");
@@ -49,7 +46,7 @@ struct sd {
 	__u8 sharpness;
 
 	char qindex;
-	char sensor;			/* Type of image sensor chip */
+	signed char sensor;		/* Type of image sensor chip */
 /* !! values used in different tables */
 #define SENSOR_CS2102 0
 #define SENSOR_CS2102K 1
@@ -2205,10 +2202,10 @@ static const struct usb_action hdcs2020xb_InitialScale[] = {
 };
 static const struct usb_action hdcs2020b_50HZ[] = {
 	{0xa0, 0x00, ZC3XX_R019_AUTOADJUSTFPS}, /* 00,19,00,cc */
-	{0xaa, 0x13, 0x0018}, /* 00,13,18,aa */
-	{0xaa, 0x14, 0x0001}, /* 00,14,01,aa */
-	{0xaa, 0x0e, 0x0005}, /* 00,0e,05,aa */
-	{0xaa, 0x19, 0x001f}, /* 00,19,1f,aa */
+	{0xaa, 0x13, 0x0018},			/* 00,13,18,aa */
+	{0xaa, 0x14, 0x0001},			/* 00,14,01,aa */
+	{0xaa, 0x0e, 0x0005},			/* 00,0e,05,aa */
+	{0xaa, 0x19, 0x001f},			/* 00,19,1f,aa */
 	{0xa0, 0x00, ZC3XX_R190_EXPOSURELIMITHIGH}, /* 01,90,00,cc */
 	{0xa0, 0x02, ZC3XX_R191_EXPOSURELIMITMID}, /* 01,91,02,cc */
 	{0xa0, 0x76, ZC3XX_R192_EXPOSURELIMITLOW}, /* 01,92,76,cc */
@@ -2226,10 +2223,10 @@ static const struct usb_action hdcs2020b_50HZ[] = {
 };
 static const struct usb_action hdcs2020b_60HZ[] = {
 	{0xa0, 0x00, ZC3XX_R019_AUTOADJUSTFPS}, /* 00,19,00,cc */
-	{0xaa, 0x13, 0x0031}, /* 00,13,31,aa */
-	{0xaa, 0x14, 0x0001}, /* 00,14,01,aa */
-	{0xaa, 0x0e, 0x0004}, /* 00,0e,04,aa */
-	{0xaa, 0x19, 0x00cd}, /* 00,19,cd,aa */
+	{0xaa, 0x13, 0x0031},			/* 00,13,31,aa */
+	{0xaa, 0x14, 0x0001},			/* 00,14,01,aa */
+	{0xaa, 0x0e, 0x0004},			/* 00,0e,04,aa */
+	{0xaa, 0x19, 0x00cd},			/* 00,19,cd,aa */
 	{0xa0, 0x00, ZC3XX_R190_EXPOSURELIMITHIGH}, /* 01,90,00,cc */
 	{0xa0, 0x02, ZC3XX_R191_EXPOSURELIMITMID}, /* 01,91,02,cc */
 	{0xa0, 0x62, ZC3XX_R192_EXPOSURELIMITLOW}, /* 01,92,62,cc */
@@ -2247,10 +2244,10 @@ static const struct usb_action hdcs2020b_60HZ[] = {
 };
 static const struct usb_action hdcs2020b_NoFliker[] = {
 	{0xa0, 0x00, ZC3XX_R019_AUTOADJUSTFPS}, /* 00,19,00,cc */
-	{0xaa, 0x13, 0x0010}, /* 00,13,10,aa */
-	{0xaa, 0x14, 0x0001}, /* 00,14,01,aa */
-	{0xaa, 0x0e, 0x0004}, /* 00,0e,04,aa */
-	{0xaa, 0x19, 0x0000}, /* 00,19,00,aa */
+	{0xaa, 0x13, 0x0010},			/* 00,13,10,aa */
+	{0xaa, 0x14, 0x0001},			/* 00,14,01,aa */
+	{0xaa, 0x0e, 0x0004},			/* 00,0e,04,aa */
+	{0xaa, 0x19, 0x0000},			/* 00,19,00,aa */
 	{0xa0, 0x00, ZC3XX_R190_EXPOSURELIMITHIGH}, /* 01,90,00,cc */
 	{0xa0, 0x02, ZC3XX_R191_EXPOSURELIMITMID}, /* 01,91,02,cc */
 	{0xa0, 0x70, ZC3XX_R192_EXPOSURELIMITLOW}, /* 01,92,70,cc */
@@ -4102,27 +4099,27 @@ static const struct usb_action pas106b_Initial_com[] = {
 
 static const struct usb_action pas106b_Initial[] = {	/* 176x144 */
 /* JPEG control */
-	{0xa0, 0x03, ZC3XX_R008_CLOCKSETTING},		/* ClockSetting */
+	{0xa0, 0x03, ZC3XX_R008_CLOCKSETTING},
 /* Sream and Sensor specific */
-	{0xa0, 0x0f, ZC3XX_R010_CMOSSENSORSELECT},	/* CMOSSensorSelect */
+	{0xa0, 0x0f, ZC3XX_R010_CMOSSENSORSELECT},
 /* Picture size */
-	{0xa0, 0x00, ZC3XX_R003_FRAMEWIDTHHIGH},  /* FrameWidthHigh 00 */
-	{0xa0, 0xb0, ZC3XX_R004_FRAMEWIDTHLOW},	  /* FrameWidthLow B0 */
-	{0xa0, 0x00, ZC3XX_R005_FRAMEHEIGHTHIGH}, /* FrameHeightHigh 00 */
-	{0xa0, 0x90, ZC3XX_R006_FRAMEHEIGHTLOW},  /* FrameHightLow 90 */
+	{0xa0, 0x00, ZC3XX_R003_FRAMEWIDTHHIGH},
+	{0xa0, 0xb0, ZC3XX_R004_FRAMEWIDTHLOW},
+	{0xa0, 0x00, ZC3XX_R005_FRAMEHEIGHTHIGH},
+	{0xa0, 0x90, ZC3XX_R006_FRAMEHEIGHTLOW},
 /* System */
-	{0xa0, 0x01, ZC3XX_R001_SYSTEMOPERATING}, /* SystemOperating */
+	{0xa0, 0x01, ZC3XX_R001_SYSTEMOPERATING},
 /* Sream and Sensor specific */
-	{0xa0, 0x03, ZC3XX_R012_VIDEOCONTROLFUNC}, /* VideoControlFunction */
-	{0xa0, 0x01, ZC3XX_R012_VIDEOCONTROLFUNC}, /* VideoControlFunction */
+	{0xa0, 0x03, ZC3XX_R012_VIDEOCONTROLFUNC},
+	{0xa0, 0x01, ZC3XX_R012_VIDEOCONTROLFUNC},
 /* Sensor Interface */
-	{0xa0, 0x08, ZC3XX_R08D_COMPABILITYMODE},  /* Compatibily Mode */
+	{0xa0, 0x08, ZC3XX_R08D_COMPABILITYMODE},
 /* Window inside sensor array */
-	{0xa0, 0x03, ZC3XX_R09A_WINXSTARTLOW},	/* WinXStartLow */
-	{0xa0, 0x00, ZC3XX_R11A_FIRSTYLOW},	/* FirstYLow */
-	{0xa0, 0x03, ZC3XX_R11C_FIRSTXLOW},	/* FirstxLow */
-	{0xa0, 0x28, ZC3XX_R09C_WINHEIGHTLOW},	/* WinHeightLow */
-	{0xa0, 0x68, ZC3XX_R09E_WINWIDTHLOW},	/* WinWidthLow */
+	{0xa0, 0x03, ZC3XX_R09A_WINXSTARTLOW},
+	{0xa0, 0x00, ZC3XX_R11A_FIRSTYLOW},
+	{0xa0, 0x03, ZC3XX_R11C_FIRSTXLOW},
+	{0xa0, 0x28, ZC3XX_R09C_WINHEIGHTLOW},
+	{0xa0, 0x68, ZC3XX_R09E_WINWIDTHLOW},
 /* Init the sensor */
 	{0xaa, 0x02, 0x0004},
 	{0xaa, 0x08, 0x0000},
@@ -4135,40 +4132,40 @@ static const struct usb_action pas106b_Initial[] = {	/* 176x144 */
 	{0xaa, 0x14, 0x0081},
 
 /* Other registors */
-	{0xa0, 0x37, ZC3XX_R101_SENSORCORRECTION}, /* SensorCorrection */
+	{0xa0, 0x37, ZC3XX_R101_SENSORCORRECTION},
 /* Frame retreiving */
-	{0xa0, 0x00, ZC3XX_R019_AUTOADJUSTFPS},	/* AutoAdjustFPS */
+	{0xa0, 0x00, ZC3XX_R019_AUTOADJUSTFPS},
 /* Gains */
-	{0xa0, 0xa0, ZC3XX_R1A8_DIGITALGAIN},	/* DigitalGain */
+	{0xa0, 0xa0, ZC3XX_R1A8_DIGITALGAIN},
 /* Unknown */
 	{0xa0, 0x00, 0x01ad},
 /* Sharpness */
-	{0xa0, 0x03, ZC3XX_R1C5_SHARPNESSMODE},	/* SharpnessMode */
-	{0xa0, 0x13, ZC3XX_R1CB_SHARPNESS05},	/* Sharpness05 */
+	{0xa0, 0x03, ZC3XX_R1C5_SHARPNESSMODE},
+	{0xa0, 0x13, ZC3XX_R1CB_SHARPNESS05},
 /* Other registors */
-	{0xa0, 0x0d, ZC3XX_R100_OPERATIONMODE},	/* OperationMode */
+	{0xa0, 0x0d, ZC3XX_R100_OPERATIONMODE},
 /* Auto exposure and white balance */
-	{0xa0, 0x06, ZC3XX_R189_AWBSTATUS},	/* AWBStatus */
+	{0xa0, 0x06, ZC3XX_R189_AWBSTATUS},
 /*Dead pixels */
-	{0xa0, 0x08, ZC3XX_R250_DEADPIXELSMODE}, /* DeadPixelsMode */
+	{0xa0, 0x08, ZC3XX_R250_DEADPIXELSMODE},
 /* EEPROM */
-	{0xa0, 0x08, ZC3XX_R301_EEPROMACCESS},	/* EEPROMAccess */
+	{0xa0, 0x08, ZC3XX_R301_EEPROMACCESS},
 /* JPEG control */
-	{0xa0, 0x03, ZC3XX_R008_CLOCKSETTING},	/* ClockSetting */
-	{0xa0, 0x08, ZC3XX_R1C6_SHARPNESS00},	/* sharpness+ */
-	{0xa0, 0x0f, ZC3XX_R1CB_SHARPNESS05},	/* sharpness- */
+	{0xa0, 0x03, ZC3XX_R008_CLOCKSETTING},
+	{0xa0, 0x08, ZC3XX_R1C6_SHARPNESS00},
+	{0xa0, 0x0f, ZC3XX_R1CB_SHARPNESS05},
 /* Other registers */
-	{0xa0, 0x0d, ZC3XX_R100_OPERATIONMODE},	/* OperationMode */
+	{0xa0, 0x0d, ZC3XX_R100_OPERATIONMODE},
 /* Auto exposure and white balance */
-	{0xa0, 0x06, ZC3XX_R189_AWBSTATUS},	/* AWBStatus */
+	{0xa0, 0x06, ZC3XX_R189_AWBSTATUS},
 /*Dead pixels */
-	{0xa0, 0x08, ZC3XX_R250_DEADPIXELSMODE}, /* DeadPixelsMode */
+	{0xa0, 0x08, ZC3XX_R250_DEADPIXELSMODE},
 /* EEPROM */
-	{0xa0, 0x08, ZC3XX_R301_EEPROMACCESS},	/* EEPROMAccess */
+	{0xa0, 0x08, ZC3XX_R301_EEPROMACCESS},
 /* JPEG control */
-	{0xa0, 0x03, ZC3XX_R008_CLOCKSETTING},	/* ClockSetting */
-	{0xa0, 0x08, ZC3XX_R1C6_SHARPNESS00},	/* sharpness+ */
-	{0xa0, 0x0f, ZC3XX_R1CB_SHARPNESS05},	/* sharpness- */
+	{0xa0, 0x03, ZC3XX_R008_CLOCKSETTING},
+	{0xa0, 0x08, ZC3XX_R1C6_SHARPNESS00},
+	{0xa0, 0x0f, ZC3XX_R1CB_SHARPNESS05},
 
 	{0xa0, 0x58, ZC3XX_R10A_RGB00},	/* matrix */
 	{0xa0, 0xf4, ZC3XX_R10B_RGB01},
@@ -4180,67 +4177,67 @@ static const struct usb_action pas106b_Initial[] = {	/* 176x144 */
 	{0xa0, 0xf4, ZC3XX_R111_RGB21},
 	{0xa0, 0x58, ZC3XX_R112_RGB22},
 /* Auto correction */
-	{0xa0, 0x03, ZC3XX_R181_WINXSTART},	/* WinXstart */
-	{0xa0, 0x08, ZC3XX_R182_WINXWIDTH},	/* WinXWidth */
-	{0xa0, 0x16, ZC3XX_R183_WINXCENTER},	/* WinXCenter */
-	{0xa0, 0x03, ZC3XX_R184_WINYSTART},	/* WinYStart */
-	{0xa0, 0x05, ZC3XX_R185_WINYWIDTH},	/* WinYWidth */
-	{0xa0, 0x14, ZC3XX_R186_WINYCENTER},	/* WinYCenter */
-	{0xa0, 0x00, ZC3XX_R180_AUTOCORRECTENABLE}, /* AutoCorrectEnable */
+	{0xa0, 0x03, ZC3XX_R181_WINXSTART},
+	{0xa0, 0x08, ZC3XX_R182_WINXWIDTH},
+	{0xa0, 0x16, ZC3XX_R183_WINXCENTER},
+	{0xa0, 0x03, ZC3XX_R184_WINYSTART},
+	{0xa0, 0x05, ZC3XX_R185_WINYWIDTH},
+	{0xa0, 0x14, ZC3XX_R186_WINYCENTER},
+	{0xa0, 0x00, ZC3XX_R180_AUTOCORRECTENABLE},
 
 /* Auto exposure and white balance */
-	{0xa0, 0x00, ZC3XX_R190_EXPOSURELIMITHIGH},	/* ExposureLimitHigh */
-	{0xa0, 0x03, ZC3XX_R191_EXPOSURELIMITMID},	/* ExposureLimitMid */
-	{0xa0, 0xb1, ZC3XX_R192_EXPOSURELIMITLOW},	/* ExposureLimitLow */
-	{0xa0, 0x00, ZC3XX_R195_ANTIFLICKERHIGH},	/* AntiFlickerHigh */
-	{0xa0, 0x00, ZC3XX_R196_ANTIFLICKERMID},	/* AntiFlickerLow */
-	{0xa0, 0x87, ZC3XX_R197_ANTIFLICKERLOW},	/* AntiFlickerLow */
-	{0xa0, 0x0c, ZC3XX_R18C_AEFREEZE},		/* AEBFreeze */
-	{0xa0, 0x18, ZC3XX_R18F_AEUNFREEZE},		/* AEBUnfreeze */
+	{0xa0, 0x00, ZC3XX_R190_EXPOSURELIMITHIGH},
+	{0xa0, 0x03, ZC3XX_R191_EXPOSURELIMITMID},
+	{0xa0, 0xb1, ZC3XX_R192_EXPOSURELIMITLOW},
+	{0xa0, 0x00, ZC3XX_R195_ANTIFLICKERHIGH},
+	{0xa0, 0x00, ZC3XX_R196_ANTIFLICKERMID},
+	{0xa0, 0x87, ZC3XX_R197_ANTIFLICKERLOW},
+	{0xa0, 0x0c, ZC3XX_R18C_AEFREEZE},
+	{0xa0, 0x18, ZC3XX_R18F_AEUNFREEZE},
 /* sensor on */
 	{0xaa, 0x07, 0x00b1},
 	{0xaa, 0x05, 0x0003},
 	{0xaa, 0x04, 0x0001},
 	{0xaa, 0x03, 0x003b},
 /* Gains */
-	{0xa0, 0x20, ZC3XX_R1A9_DIGITALLIMITDIFF},	/* DigitalLimitDiff */
-	{0xa0, 0x26, ZC3XX_R1AA_DIGITALGAINSTEP},	/* DigitalGainStep */
-	{0xa0, 0xa0, ZC3XX_R11D_GLOBALGAIN},		/* GlobalGain */
-	{0xa0, 0x60, ZC3XX_R11D_GLOBALGAIN},		/* GlobalGain */
+	{0xa0, 0x20, ZC3XX_R1A9_DIGITALLIMITDIFF},
+	{0xa0, 0x26, ZC3XX_R1AA_DIGITALGAINSTEP},
+	{0xa0, 0xa0, ZC3XX_R11D_GLOBALGAIN},
+	{0xa0, 0x60, ZC3XX_R11D_GLOBALGAIN},
 /* Auto correction */
-	{0xa0, 0x40, ZC3XX_R180_AUTOCORRECTENABLE},	/* AutoCorrectEnable */
+	{0xa0, 0x40, ZC3XX_R180_AUTOCORRECTENABLE},
 	{0xa1, 0x01, 0x0180},				/* AutoCorrectEnable */
-	{0xa0, 0x42, ZC3XX_R180_AUTOCORRECTENABLE},	/* AutoCorrectEnable */
+	{0xa0, 0x42, ZC3XX_R180_AUTOCORRECTENABLE},
 /* Gains */
-	{0xa0, 0x40, ZC3XX_R116_RGAIN},			/* RGain */
-	{0xa0, 0x40, ZC3XX_R117_GGAIN},			/* GGain */
-	{0xa0, 0x40, ZC3XX_R118_BGAIN},			/* BGain */
+	{0xa0, 0x40, ZC3XX_R116_RGAIN},
+	{0xa0, 0x40, ZC3XX_R117_GGAIN},
+	{0xa0, 0x40, ZC3XX_R118_BGAIN},
 	{}
 };
 
 static const struct usb_action pas106b_InitialScale[] = {	/* 352x288 */
 /* JPEG control */
-	{0xa0, 0x03, ZC3XX_R008_CLOCKSETTING},		/* ClockSetting */
+	{0xa0, 0x03, ZC3XX_R008_CLOCKSETTING},
 /* Sream and Sensor specific */
-	{0xa0, 0x0f, ZC3XX_R010_CMOSSENSORSELECT},	/* CMOSSensorSelect */
+	{0xa0, 0x0f, ZC3XX_R010_CMOSSENSORSELECT},
 /* Picture size */
-	{0xa0, 0x01, ZC3XX_R003_FRAMEWIDTHHIGH},	/* FrameWidthHigh */
-	{0xa0, 0x60, ZC3XX_R004_FRAMEWIDTHLOW},		/* FrameWidthLow */
-	{0xa0, 0x01, ZC3XX_R005_FRAMEHEIGHTHIGH},	/* FrameHeightHigh */
-	{0xa0, 0x20, ZC3XX_R006_FRAMEHEIGHTLOW},	/* FrameHightLow */
+	{0xa0, 0x01, ZC3XX_R003_FRAMEWIDTHHIGH},
+	{0xa0, 0x60, ZC3XX_R004_FRAMEWIDTHLOW},
+	{0xa0, 0x01, ZC3XX_R005_FRAMEHEIGHTHIGH},
+	{0xa0, 0x20, ZC3XX_R006_FRAMEHEIGHTLOW},
 /* System */
-	{0xa0, 0x01, ZC3XX_R001_SYSTEMOPERATING},	/* SystemOperating */
+	{0xa0, 0x01, ZC3XX_R001_SYSTEMOPERATING},
 /* Sream and Sensor specific */
-	{0xa0, 0x03, ZC3XX_R012_VIDEOCONTROLFUNC}, /* VideoControlFunction */
-	{0xa0, 0x01, ZC3XX_R012_VIDEOCONTROLFUNC}, /* VideoControlFunction */
+	{0xa0, 0x03, ZC3XX_R012_VIDEOCONTROLFUNC},
+	{0xa0, 0x01, ZC3XX_R012_VIDEOCONTROLFUNC},
 /* Sensor Interface */
-	{0xa0, 0x08, ZC3XX_R08D_COMPABILITYMODE},	/* Compatibily Mode */
+	{0xa0, 0x08, ZC3XX_R08D_COMPABILITYMODE},
 /* Window inside sensor array */
-	{0xa0, 0x03, ZC3XX_R09A_WINXSTARTLOW},	/* WinXStartLow */
-	{0xa0, 0x00, ZC3XX_R11A_FIRSTYLOW},	/* FirstYLow */
-	{0xa0, 0x03, ZC3XX_R11C_FIRSTXLOW},	/* FirstxLow */
-	{0xa0, 0x28, ZC3XX_R09C_WINHEIGHTLOW},	/* WinHeightLow */
-	{0xa0, 0x68, ZC3XX_R09E_WINWIDTHLOW},	/* WinWidthLow */
+	{0xa0, 0x03, ZC3XX_R09A_WINXSTARTLOW},
+	{0xa0, 0x00, ZC3XX_R11A_FIRSTYLOW},
+	{0xa0, 0x03, ZC3XX_R11C_FIRSTXLOW},
+	{0xa0, 0x28, ZC3XX_R09C_WINHEIGHTLOW},
+	{0xa0, 0x68, ZC3XX_R09E_WINWIDTHLOW},
 /* Init the sensor */
 	{0xaa, 0x02, 0x0004},
 	{0xaa, 0x08, 0x0000},
@@ -4253,41 +4250,41 @@ static const struct usb_action pas106b_InitialScale[] = {	/* 352x288 */
 	{0xaa, 0x14, 0x0081},
 
 /* Other registors */
-	{0xa0, 0x37, ZC3XX_R101_SENSORCORRECTION}, /* SensorCorrection */
+	{0xa0, 0x37, ZC3XX_R101_SENSORCORRECTION},
 /* Frame retreiving */
-	{0xa0, 0x00, ZC3XX_R019_AUTOADJUSTFPS},	/* AutoAdjustFPS */
+	{0xa0, 0x00, ZC3XX_R019_AUTOADJUSTFPS},
 /* Gains */
-	{0xa0, 0xa0, ZC3XX_R1A8_DIGITALGAIN},	/* DigitalGain */
+	{0xa0, 0xa0, ZC3XX_R1A8_DIGITALGAIN},
 /* Unknown */
 	{0xa0, 0x00, 0x01ad},
 /* Sharpness */
-	{0xa0, 0x03, ZC3XX_R1C5_SHARPNESSMODE},	/* SharpnessMode */
-	{0xa0, 0x13, ZC3XX_R1CB_SHARPNESS05},	/* Sharpness05 */
+	{0xa0, 0x03, ZC3XX_R1C5_SHARPNESSMODE},
+	{0xa0, 0x13, ZC3XX_R1CB_SHARPNESS05},
 /* Other registors */
-	{0xa0, 0x0d, ZC3XX_R100_OPERATIONMODE},	/* OperationMode */
+	{0xa0, 0x0d, ZC3XX_R100_OPERATIONMODE},
 /* Auto exposure and white balance */
-	{0xa0, 0x06, ZC3XX_R189_AWBSTATUS},	/* AWBStatus */
-	{0xa0, 0x80, ZC3XX_R18D_YTARGET},	/* ????????? */
+	{0xa0, 0x06, ZC3XX_R189_AWBSTATUS},
+	{0xa0, 0x80, ZC3XX_R18D_YTARGET},
 /*Dead pixels */
-	{0xa0, 0x08, ZC3XX_R250_DEADPIXELSMODE}, /* DeadPixelsMode */
+	{0xa0, 0x08, ZC3XX_R250_DEADPIXELSMODE},
 /* EEPROM */
-	{0xa0, 0x08, ZC3XX_R301_EEPROMACCESS},	/* EEPROMAccess */
+	{0xa0, 0x08, ZC3XX_R301_EEPROMACCESS},
 /* JPEG control */
-	{0xa0, 0x03, ZC3XX_R008_CLOCKSETTING},	/* ClockSetting */
-	{0xa0, 0x08, ZC3XX_R1C6_SHARPNESS00},	/* sharpness+ */
-	{0xa0, 0x0f, ZC3XX_R1CB_SHARPNESS05},	/* sharpness- */
+	{0xa0, 0x03, ZC3XX_R008_CLOCKSETTING},
+	{0xa0, 0x08, ZC3XX_R1C6_SHARPNESS00},
+	{0xa0, 0x0f, ZC3XX_R1CB_SHARPNESS05},
 /* Other registers */
-	{0xa0, 0x0d, ZC3XX_R100_OPERATIONMODE},	/* OperationMode */
+	{0xa0, 0x0d, ZC3XX_R100_OPERATIONMODE},
 /* Auto exposure and white balance */
-	{0xa0, 0x06, ZC3XX_R189_AWBSTATUS},	/* AWBStatus */
+	{0xa0, 0x06, ZC3XX_R189_AWBSTATUS},
 /*Dead pixels */
-	{0xa0, 0x08, ZC3XX_R250_DEADPIXELSMODE}, /* DeadPixelsMode */
+	{0xa0, 0x08, ZC3XX_R250_DEADPIXELSMODE},
 /* EEPROM */
-	{0xa0, 0x08, ZC3XX_R301_EEPROMACCESS},	/* EEPROMAccess */
+	{0xa0, 0x08, ZC3XX_R301_EEPROMACCESS},
 /* JPEG control */
-	{0xa0, 0x03, ZC3XX_R008_CLOCKSETTING},	/* ClockSetting */
-	{0xa0, 0x08, ZC3XX_R1C6_SHARPNESS00},	/* sharpness+ */
-	{0xa0, 0x0f, ZC3XX_R1CB_SHARPNESS05},	/* sharpness- */
+	{0xa0, 0x03, ZC3XX_R008_CLOCKSETTING},
+	{0xa0, 0x08, ZC3XX_R1C6_SHARPNESS00},
+	{0xa0, 0x0f, ZC3XX_R1CB_SHARPNESS05},
 
 	{0xa0, 0x58, ZC3XX_R10A_RGB00},	/* matrix */
 	{0xa0, 0xf4, ZC3XX_R10B_RGB01},
@@ -4299,43 +4296,43 @@ static const struct usb_action pas106b_InitialScale[] = {	/* 352x288 */
 	{0xa0, 0xf4, ZC3XX_R111_RGB21},
 	{0xa0, 0x58, ZC3XX_R112_RGB22},
 /* Auto correction */
-	{0xa0, 0x03, ZC3XX_R181_WINXSTART},	/* WinXstart */
-	{0xa0, 0x08, ZC3XX_R182_WINXWIDTH},	/* WinXWidth */
-	{0xa0, 0x16, ZC3XX_R183_WINXCENTER},	/* WinXCenter */
-	{0xa0, 0x03, ZC3XX_R184_WINYSTART},	/* WinYStart */
-	{0xa0, 0x05, ZC3XX_R185_WINYWIDTH},	/* WinYWidth */
-	{0xa0, 0x14, ZC3XX_R186_WINYCENTER},	/* WinYCenter */
-	{0xa0, 0x00, ZC3XX_R180_AUTOCORRECTENABLE}, /* AutoCorrectEnable */
+	{0xa0, 0x03, ZC3XX_R181_WINXSTART},
+	{0xa0, 0x08, ZC3XX_R182_WINXWIDTH},
+	{0xa0, 0x16, ZC3XX_R183_WINXCENTER},
+	{0xa0, 0x03, ZC3XX_R184_WINYSTART},
+	{0xa0, 0x05, ZC3XX_R185_WINYWIDTH},
+	{0xa0, 0x14, ZC3XX_R186_WINYCENTER},
+	{0xa0, 0x00, ZC3XX_R180_AUTOCORRECTENABLE},
 
 /* Auto exposure and white balance */
-	{0xa0, 0x00, ZC3XX_R190_EXPOSURELIMITHIGH}, /* ExposureLimitHigh 0 */
-	{0xa0, 0x03, ZC3XX_R191_EXPOSURELIMITMID},  /* ExposureLimitMid */
-	{0xa0, 0xb1, ZC3XX_R192_EXPOSURELIMITLOW},  /* ExposureLimitLow 0xb1 */
+	{0xa0, 0x00, ZC3XX_R190_EXPOSURELIMITHIGH},
+	{0xa0, 0x03, ZC3XX_R191_EXPOSURELIMITMID},
+	{0xa0, 0xb1, ZC3XX_R192_EXPOSURELIMITLOW},
 
-	{0xa0, 0x00, ZC3XX_R195_ANTIFLICKERHIGH},   /* AntiFlickerHigh 0x00 */
-	{0xa0, 0x00, ZC3XX_R196_ANTIFLICKERMID},    /* AntiFlickerLow 0x00 */
-	{0xa0, 0x87, ZC3XX_R197_ANTIFLICKERLOW},    /* AntiFlickerLow 0x87 */
+	{0xa0, 0x00, ZC3XX_R195_ANTIFLICKERHIGH},
+	{0xa0, 0x00, ZC3XX_R196_ANTIFLICKERMID},
+	{0xa0, 0x87, ZC3XX_R197_ANTIFLICKERLOW},
 
-	{0xa0, 0x10, ZC3XX_R18C_AEFREEZE},	/* AEBFreeze 0x10 0x0c */
-	{0xa0, 0x20, ZC3XX_R18F_AEUNFREEZE},	/* AEBUnfreeze 0x30 0x18 */
+	{0xa0, 0x10, ZC3XX_R18C_AEFREEZE},
+	{0xa0, 0x20, ZC3XX_R18F_AEUNFREEZE},
 /* sensor on */
 	{0xaa, 0x07, 0x00b1},
 	{0xaa, 0x05, 0x0003},
 	{0xaa, 0x04, 0x0001},
 	{0xaa, 0x03, 0x003b},
 /* Gains */
-	{0xa0, 0x20, ZC3XX_R1A9_DIGITALLIMITDIFF},	/* DigitalLimitDiff */
-	{0xa0, 0x26, ZC3XX_R1AA_DIGITALGAINSTEP},	/* DigitalGainStep */
-	{0xa0, 0xa0, ZC3XX_R11D_GLOBALGAIN},	/* GlobalGain */
-	{0xa0, 0x60, ZC3XX_R11D_GLOBALGAIN},	/* GlobalGain */
+	{0xa0, 0x20, ZC3XX_R1A9_DIGITALLIMITDIFF},
+	{0xa0, 0x26, ZC3XX_R1AA_DIGITALGAINSTEP},
+	{0xa0, 0xa0, ZC3XX_R11D_GLOBALGAIN},
+	{0xa0, 0x60, ZC3XX_R11D_GLOBALGAIN},
 /* Auto correction */
-	{0xa0, 0x40, ZC3XX_R180_AUTOCORRECTENABLE},	/* AutoCorrectEnable */
+	{0xa0, 0x40, ZC3XX_R180_AUTOCORRECTENABLE},
 	{0xa1, 0x01, 0x0180},				/* AutoCorrectEnable */
-	{0xa0, 0x42, ZC3XX_R180_AUTOCORRECTENABLE},	/* AutoCorrectEnable */
+	{0xa0, 0x42, ZC3XX_R180_AUTOCORRECTENABLE},
 /* Gains */
-	{0xa0, 0x40, ZC3XX_R116_RGAIN},		/* RGain */
-	{0xa0, 0x40, ZC3XX_R117_GGAIN},		/* GGain */
-	{0xa0, 0x40, ZC3XX_R118_BGAIN},		/* BGain */
+	{0xa0, 0x40, ZC3XX_R116_RGAIN},
+	{0xa0, 0x40, ZC3XX_R117_GGAIN},
+	{0xa0, 0x40, ZC3XX_R118_BGAIN},
 
 	{0xa0, 0x00, 0x0007},			/* AutoCorrectEnable */
 	{0xa0, 0xff, ZC3XX_R018_FRAMELOST},	/* Frame adjust */
@@ -4459,8 +4456,8 @@ static const struct usb_action pb03303x_Initial[] = {
 	{0xa0, 0x50, ZC3XX_R112_RGB22},
 
 	{0xa1, 0x01, 0x0008},
-	{0xa0, 0x03, ZC3XX_R008_CLOCKSETTING},	/* clock ? */
-	{0xa0, 0x08, ZC3XX_R1C6_SHARPNESS00},	/* sharpness+ */
+	{0xa0, 0x03, ZC3XX_R008_CLOCKSETTING},
+	{0xa0, 0x08, ZC3XX_R1C6_SHARPNESS00},
 	{0xa1, 0x01, 0x01c8},
 	{0xa1, 0x01, 0x01c9},
 	{0xa1, 0x01, 0x01ca},
@@ -5984,7 +5981,7 @@ static const struct usb_action tas5130c_vf0250_Initial[] = {
 	{0xaa, 0x1b, 0x0000},		/* 00,1b,00,aa, */
 	{0xaa, 0x13, 0x0002},		/* 00,13,02,aa, */
 	{0xaa, 0x15, 0x0004},		/* 00,15,04,aa */
-	{0xaa, 0x01, 0x0000},
+/*??	{0xaa, 0x01, 0x0000}, */
 	{0xaa, 0x01, 0x0000},
 	{0xaa, 0x1a, 0x0000},		/* 00,1a,00,aa, */
 	{0xaa, 0x1c, 0x0017},		/* 00,1c,17,aa, */
@@ -6000,8 +5997,8 @@ static const struct usb_action tas5130c_vf0250_Initial[] = {
 	{0xaa, 0x0f, 0x00a0},		/* 00,0f,a0,aa, */
 	{0xaa, 0x10, 0x0000},		/* 00,10,00,aa, */
 	{0xaa, 0x11, 0x00a0},		/* 00,11,a0,aa, */
-	{0xa0, 0x00, 0x0039},
-	{0xa1, 0x01, 0x0037},
+/*??	{0xa0, 0x00, 0x0039},
+	{0xa1, 0x01, 0x0037}, */
 	{0xaa, 0x16, 0x0001},		/* 00,16,01,aa, */
 	{0xaa, 0x17, 0x00e8},		/* 00,17,e6,aa, (e6 -> e8) */
 	{0xaa, 0x18, 0x0002},		/* 00,18,02,aa, */
@@ -6272,7 +6269,7 @@ static void reg_w(struct usb_device *dev,
 			__u8 value,
 			__u16 index)
 {
-	PDEBUG(D_USBO, "reg w %02x -> [%04x]", value, index);
+	PDEBUG(D_USBO, "reg w [%04x] = %02x", index, value);
 	reg_w_i(dev, value, index);
 }
 
@@ -6280,17 +6277,17 @@ static __u16 i2c_read(struct gspca_dev *gspca_dev,
 			__u8 reg)
 {
 	__u8 retbyte;
-	__u8 retval[2];
+	__u16 retval;
 
 	reg_w_i(gspca_dev->dev, reg, 0x92);
 	reg_w_i(gspca_dev->dev, 0x02, 0x90);		/* <- read command */
 	msleep(25);
 	retbyte = reg_r_i(gspca_dev, 0x0091);		/* read status */
-	retval[0] = reg_r_i(gspca_dev, 0x0095);		/* read Lowbyte */
-	retval[1] = reg_r_i(gspca_dev, 0x0096);		/* read Hightbyte */
-	PDEBUG(D_USBO, "i2c r [%02x] -> (%02x) %02x%02x",
-			reg, retbyte, retval[1], retval[0]);
-	return (retval[1] << 8) | retval[0];
+	retval = reg_r_i(gspca_dev, 0x0095);		/* read Lowbyte */
+	retval |= reg_r_i(gspca_dev, 0x0096) << 8;	/* read Hightbyte */
+	PDEBUG(D_USBO, "i2c r [%02x] -> %04x (%02x)",
+			reg, retval, retbyte);
+	return retval;
 }
 
 static __u8 i2c_write(struct gspca_dev *gspca_dev,
@@ -6306,7 +6303,7 @@ static __u8 i2c_write(struct gspca_dev *gspca_dev,
 	reg_w_i(gspca_dev->dev, 0x01, 0x90);		/* <- write command */
 	msleep(5);
 	retbyte = reg_r_i(gspca_dev, 0x0091);		/* read status */
-	PDEBUG(D_USBO, "i2c w [%02x] %02x%02x (%02x)",
+	PDEBUG(D_USBO, "i2c w [%02x] = %02x%02x (%02x)",
 			reg, valH, valL, retbyte);
 	return retbyte;
 }
@@ -6349,6 +6346,8 @@ static void setmatrix(struct gspca_dev *gspca_dev)
 		{0x58, 0xf4, 0xf4, 0xf4, 0x58, 0xf4, 0xf4, 0xf4, 0x58};
 	static const __u8 po2030_matrix[9] =
 		{0x60, 0xf0, 0xf0, 0xf0, 0x60, 0xf0, 0xf0, 0xf0, 0x60};
+	static const __u8 vf0250_matrix[9] =
+		{0x7b, 0xea, 0xea, 0xea, 0x7b, 0xea, 0xea, 0xea, 0x7b};
 
 	switch (sd->sensor) {
 	case SENSOR_GC0305:
@@ -6363,8 +6362,9 @@ static void setmatrix(struct gspca_dev *gspca_dev)
 	case SENSOR_PO2030:
 		matrix = po2030_matrix;
 		break;
-	case SENSOR_TAS5130C_VF0250:	/* no matrix? */
-		return;
+	case SENSOR_TAS5130C_VF0250:
+		matrix = vf0250_matrix;
+		break;
 	default:		/* matrix already loaded */
 		return;
 	}
@@ -6469,7 +6469,7 @@ static void setcontrast(struct gspca_dev *gspca_dev)
 		NULL, Tgradient_1, Tgradient_2,
 		Tgradient_3, Tgradient_4, Tgradient_5, Tgradient_6
 	};
-#ifdef CONFIG_VIDEO_ADV_DEBUG
+#ifdef GSPCA_DEBUG
 	__u8 v[16];
 #endif
 
@@ -6487,7 +6487,7 @@ static void setcontrast(struct gspca_dev *gspca_dev)
 		else if (g <= 0)
 			g = 1;
 		reg_w(dev, g, 0x0120 + i);	/* gamma */
-#ifdef CONFIG_VIDEO_ADV_DEBUG
+#ifdef GSPCA_DEBUG
 		if (gspca_debug & D_CONF)
 			v[i] = g;
 #endif
@@ -6507,7 +6507,7 @@ static void setcontrast(struct gspca_dev *gspca_dev)
 				g = 1;
 		}
 		reg_w(dev, g, 0x0130 + i);	/* gradient */
-#ifdef CONFIG_VIDEO_ADV_DEBUG
+#ifdef GSPCA_DEBUG
 		if (gspca_debug & D_CONF)
 			v[i] = g;
 #endif
@@ -6744,7 +6744,7 @@ static int vga_2wr_probe(struct gspca_dev *gspca_dev)
 		return 0x04;			/* CS2102 */
 
 	start_2wr_probe(dev, 0x06);		/* OmniVision */
-	reg_w(dev, 0x08, 0x8d);
+	reg_w(dev, 0x08, 0x008d);
 	i2c_write(gspca_dev, 0x11, 0xaa, 0x00);
 	retbyte = i2c_read(gspca_dev, 0x11);
 	if (retbyte != 0) {
@@ -6778,7 +6778,7 @@ static int vga_2wr_probe(struct gspca_dev *gspca_dev)
 		return 0x0c;			/* ICM105A */
 
 	start_2wr_probe(dev, 0x0e);		/* PAS202BCB */
-	reg_w(dev, 0x08, 0x8d);
+	reg_w(dev, 0x08, 0x008d);
 	i2c_write(gspca_dev, 0x03, 0xaa, 0x00);
 	msleep(500);
 	retbyte = i2c_read(gspca_dev, 0x03);
@@ -6830,7 +6830,6 @@ static const struct sensor_by_chipset_revision chipset_revision_sensor[] = {
 	{0x8001, 0x13},
 	{0x8000, 0x14},		/* CS2102K */
 	{0x8400, 0x15},		/* TAS5130K */
-	{0, 0}
 };
 
 static int vga_3wr_probe(struct gspca_dev *gspca_dev)
@@ -6843,7 +6842,7 @@ static int vga_3wr_probe(struct gspca_dev *gspca_dev)
 
 /*fixme: lack of 8b=b3 (11,12)-> 10, 8b=e0 (14,15,16)-> 12 found in gspcav1*/
 	reg_w(dev, 0x02, 0x0010);
-	reg_r(gspca_dev, 0x10);
+	reg_r(gspca_dev, 0x0010);
 	reg_w(dev, 0x01, 0x0000);
 	reg_w(dev, 0x00, 0x0010);
 	reg_w(dev, 0x01, 0x0001);
@@ -6869,17 +6868,15 @@ static int vga_3wr_probe(struct gspca_dev *gspca_dev)
 	PDEBUG(D_PROBE, "probe 3wr vga 1 0x%04x", checkword);
 	reg_r(gspca_dev, 0x0010);
 	/* this is tested only once anyway */
-	i = 0;
-	while (chipset_revision_sensor[i].revision) {
+	for (i = 0; i < ARRAY_SIZE(chipset_revision_sensor); i++) {
 		if (chipset_revision_sensor[i].revision == checkword) {
 			sd->chip_revision = checkword;
 			send_unknown(dev, SENSOR_PB0330);
 			return chipset_revision_sensor[i].internal_sensor_id;
 		}
-		i++;
 	}
 
-	reg_w(dev, 0x01, 0x0000);
+	reg_w(dev, 0x01, 0x0000);	/* check ?? */
 	reg_w(dev, 0x01, 0x0001);
 	reg_w(dev, 0xdd, 0x008b);
 	reg_w(dev, 0x0a, 0x0010);
@@ -6901,8 +6898,11 @@ static int vga_3wr_probe(struct gspca_dev *gspca_dev)
 	retbyte = i2c_read(gspca_dev, 0x00);
 	if (retbyte != 0) {
 		PDEBUG(D_PROBE, "probe 3wr vga type %02x", retbyte);
-		send_unknown(dev, SENSOR_GC0305);
-		return retbyte;		/* 0x29 = gc0305 - should continue? */
+		if (retbyte == 0x11)			/* VF0250 */
+			return 0x0250;
+		if (retbyte == 0x29)			/* gc0305 */
+			send_unknown(dev, SENSOR_GC0305);
+		return retbyte;
 	}
 
 	reg_w(dev, 0x01, 0x0000);	/* check OmniVision */
@@ -6918,18 +6918,18 @@ static int vga_3wr_probe(struct gspca_dev *gspca_dev)
 		return 0x06;		/* OmniVision confirm ? */
 	}
 
-	reg_w(dev, 0x01, 0x00);
-	reg_w(dev, 0x00, 0x02);
-	reg_w(dev, 0x01, 0x10);
-	reg_w(dev, 0x01, 0x01);
-	reg_w(dev, 0xee, 0x8b);
-	reg_w(dev, 0x03, 0x12);
+	reg_w(dev, 0x01, 0x0000);
+	reg_w(dev, 0x00, 0x0002);
+	reg_w(dev, 0x01, 0x0010);
+	reg_w(dev, 0x01, 0x0001);
+	reg_w(dev, 0xee, 0x008b);
+	reg_w(dev, 0x03, 0x0012);
 /*	msleep(150); */
-	reg_w(dev, 0x01, 0x12);
-	reg_w(dev, 0x05, 0x12);
-	retbyte = i2c_read(gspca_dev, 0x00);		/* ID 0 */
+	reg_w(dev, 0x01, 0x0012);
+	reg_w(dev, 0x05, 0x0012);
+	retbyte = i2c_read(gspca_dev, 0x0000);		/* ID 0 */
 	checkword = retbyte << 8;
-	retbyte = i2c_read(gspca_dev, 0x01);		/* ID 1 */
+	retbyte = i2c_read(gspca_dev, 0x0001);		/* ID 1 */
 	checkword |= retbyte;
 	PDEBUG(D_PROBE, "probe 3wr vga 2 0x%04x", checkword);
 	if (checkword == 0x2030) {
@@ -6939,14 +6939,14 @@ static int vga_3wr_probe(struct gspca_dev *gspca_dev)
 		return checkword;
 	}
 
-	reg_w(dev, 0x01, 0x00);
-	reg_w(dev, 0x0a, 0x10);
-	reg_w(dev, 0xd3, 0x8b);
-	reg_w(dev, 0x01, 0x01);
-	reg_w(dev, 0x03, 0x12);
-	reg_w(dev, 0x01, 0x12);
-	reg_w(dev, 0x05, 0x01);
-	reg_w(dev, 0xd3, 0x8b);
+	reg_w(dev, 0x01, 0x0000);
+	reg_w(dev, 0x0a, 0x0010);
+	reg_w(dev, 0xd3, 0x008b);
+	reg_w(dev, 0x01, 0x0001);
+	reg_w(dev, 0x03, 0x0012);
+	reg_w(dev, 0x01, 0x0012);
+	reg_w(dev, 0x05, 0x0001);
+	reg_w(dev, 0xd3, 0x008b);
 	retbyte = i2c_read(gspca_dev, 0x01);
 	if (retbyte != 0) {
 		PDEBUG(D_PROBE, "probe 3wr vga type 0a ?");
@@ -6962,7 +6962,9 @@ static int zcxx_probeSensor(struct gspca_dev *gspca_dev)
 
 	switch (sd->sensor) {
 	case SENSOR_MC501CB:
+		return -1;		/* don't probe */
 	case SENSOR_TAS5130C_VF0250:
+				/* may probe but with write in reg 0x0010 */
 		return -1;		/* don't probe */
 	}
 	sensor = vga_2wr_probe(gspca_dev);
@@ -7010,30 +7012,7 @@ static int sd_config(struct gspca_dev *gspca_dev,
 
 	/* define some sensors from the vendor/product */
 	sd->sharpness = 2;
-	switch (id->idVendor) {
-	case 0x041e:				/* Creative */
-		switch (id->idProduct) {
-		case 0x4051:			/* zc301 chips */
-		case 0x4053:
-			sd->sensor = SENSOR_TAS5130C_VF0250;
-			break;
-		}
-		break;
-	case 0x046d:				/* Logitech Labtec */
-		switch (id->idProduct) {
-		case 0x08dd:
-			sd->sensor = SENSOR_MC501CB;
-			break;
-		}
-		break;
-	case 0x0ac8:				/* Vimicro z-star */
-		switch (id->idProduct) {
-		case 0x305b:
-			sd->sensor = SENSOR_TAS5130C_VF0250;
-			break;
-		}
-		break;
-	}
+	sd->sensor = id->driver_info;
 	sensor = zcxx_probeSensor(gspca_dev);
 	if (sensor >= 0)
 		PDEBUG(D_PROBE, "probe sensor -> %02x", sensor);
@@ -7119,6 +7098,10 @@ static int sd_config(struct gspca_dev *gspca_dev,
 			PDEBUG(D_PROBE, "Find Sensor GC0305");
 			sd->sensor = SENSOR_GC0305;
 			break;
+		case 0x0250:
+			PDEBUG(D_PROBE, "Sensor Tas5130 (VF0250)");
+			sd->sensor =  SENSOR_TAS5130C_VF0250;
+			break;
 		case 0x2030:
 			PDEBUG(D_PROBE, "Find Sensor PO2030");
 			sd->sensor = SENSOR_PO2030;
@@ -7146,7 +7129,6 @@ static int sd_config(struct gspca_dev *gspca_dev,
 	}
 
 	cam = &gspca_dev->cam;
-	cam->dev_name = (char *) id->driver_info;
 	cam->epaddr = 0x01;
 /*fixme:test*/
 	gspca_dev->nbalt--;
@@ -7235,6 +7217,7 @@ static void sd_start(struct gspca_dev *gspca_dev)
 	case SENSOR_GC0305:
 	case SENSOR_OV7620:
 	case SENSOR_PO2030:
+	case SENSOR_TAS5130C_VF0250:
 		msleep(100);			/* ?? */
 		reg_r(gspca_dev, 0x0002);	/* --> 0x40 */
 		reg_w(dev, 0x09, 0x01ad);	/* (from win traces) */
@@ -7515,70 +7498,69 @@ static const struct sd_desc sd_desc = {
 	.querymenu = sd_querymenu,
 };
 
-#define DVNM(name) .driver_info = (kernel_ulong_t) name
 static const __devinitdata struct usb_device_id device_table[] = {
-	{USB_DEVICE(0x041e, 0x041e), DVNM("Creative WebCam Live!")},
+	{USB_DEVICE(0x041e, 0x041e)},
 #ifndef CONFIG_USB_ZC0301
-	{USB_DEVICE(0x041e, 0x4017), DVNM("Creative Webcam Mobile PD1090")},
-	{USB_DEVICE(0x041e, 0x401c), DVNM("Creative NX")},
-	{USB_DEVICE(0x041e, 0x401e), DVNM("Creative Nx Pro")},
-	{USB_DEVICE(0x041e, 0x401f), DVNM("Creative Webcam Notebook PD1171")},
+	{USB_DEVICE(0x041e, 0x4017)},
+	{USB_DEVICE(0x041e, 0x401c)},
+	{USB_DEVICE(0x041e, 0x401e)},
+	{USB_DEVICE(0x041e, 0x401f)},
 #endif
-	{USB_DEVICE(0x041e, 0x4029), DVNM("Creative WebCam Vista Pro")},
+	{USB_DEVICE(0x041e, 0x4029)},
 #ifndef CONFIG_USB_ZC0301
-	{USB_DEVICE(0x041e, 0x4034), DVNM("Creative Instant P0620")},
-	{USB_DEVICE(0x041e, 0x4035), DVNM("Creative Instant P0620D")},
-	{USB_DEVICE(0x041e, 0x4036), DVNM("Creative Live !")},
-	{USB_DEVICE(0x041e, 0x403a), DVNM("Creative Nx Pro 2")},
+	{USB_DEVICE(0x041e, 0x4034)},
+	{USB_DEVICE(0x041e, 0x4035)},
+	{USB_DEVICE(0x041e, 0x4036)},
+	{USB_DEVICE(0x041e, 0x403a)},
 #endif
-	{USB_DEVICE(0x041e, 0x4051), DVNM("Creative Notebook Pro (VF0250)")},
-	{USB_DEVICE(0x041e, 0x4053), DVNM("Creative Live!Cam Video IM")},
+	{USB_DEVICE(0x041e, 0x4051), .driver_info = SENSOR_TAS5130C_VF0250},
+	{USB_DEVICE(0x041e, 0x4053), .driver_info = SENSOR_TAS5130C_VF0250},
 #ifndef CONFIG_USB_ZC0301
-	{USB_DEVICE(0x0458, 0x7007), DVNM("Genius VideoCam V2")},
-	{USB_DEVICE(0x0458, 0x700c), DVNM("Genius VideoCam V3")},
-	{USB_DEVICE(0x0458, 0x700f), DVNM("Genius VideoCam Web V2")},
+	{USB_DEVICE(0x0458, 0x7007)},
+	{USB_DEVICE(0x0458, 0x700c)},
+	{USB_DEVICE(0x0458, 0x700f)},
 #endif
-	{USB_DEVICE(0x0461, 0x0a00), DVNM("MicroInnovation WebCam320")},
-	{USB_DEVICE(0x046d, 0x08a0), DVNM("Logitech QC IM")},
-	{USB_DEVICE(0x046d, 0x08a1), DVNM("Logitech QC IM 0x08A1 +sound")},
-	{USB_DEVICE(0x046d, 0x08a2), DVNM("Labtec Webcam Pro")},
-	{USB_DEVICE(0x046d, 0x08a3), DVNM("Logitech QC Chat")},
-	{USB_DEVICE(0x046d, 0x08a6), DVNM("Logitech QCim")},
-	{USB_DEVICE(0x046d, 0x08a7), DVNM("Logitech QuickCam Image")},
-	{USB_DEVICE(0x046d, 0x08a9), DVNM("Logitech Notebook Deluxe")},
-	{USB_DEVICE(0x046d, 0x08aa), DVNM("Labtec Webcam Notebook")},
-	{USB_DEVICE(0x046d, 0x08ac), DVNM("Logitech QuickCam Cool")},
-	{USB_DEVICE(0x046d, 0x08ad), DVNM("Logitech QCCommunicate STX")},
+	{USB_DEVICE(0x0461, 0x0a00)},
+	{USB_DEVICE(0x046d, 0x08a0)},
+	{USB_DEVICE(0x046d, 0x08a1)},
+	{USB_DEVICE(0x046d, 0x08a2)},
+	{USB_DEVICE(0x046d, 0x08a3)},
+	{USB_DEVICE(0x046d, 0x08a6)},
+	{USB_DEVICE(0x046d, 0x08a7)},
+	{USB_DEVICE(0x046d, 0x08a9)},
+	{USB_DEVICE(0x046d, 0x08aa)},
+	{USB_DEVICE(0x046d, 0x08ac)},
+	{USB_DEVICE(0x046d, 0x08ad)},
 #ifndef CONFIG_USB_ZC0301
-	{USB_DEVICE(0x046d, 0x08ae), DVNM("Logitech QuickCam for Notebooks")},
+	{USB_DEVICE(0x046d, 0x08ae)},
 #endif
-	{USB_DEVICE(0x046d, 0x08af), DVNM("Logitech QuickCam Cool")},
-	{USB_DEVICE(0x046d, 0x08b9), DVNM("Logitech QC IM ???")},
-	{USB_DEVICE(0x046d, 0x08d7), DVNM("Logitech QCam STX")},
-	{USB_DEVICE(0x046d, 0x08d9), DVNM("Logitech QuickCam IM/Connect")},
-	{USB_DEVICE(0x046d, 0x08d8), DVNM("Logitech Notebook Deluxe")},
-	{USB_DEVICE(0x046d, 0x08da), DVNM("Logitech QuickCam Messenger")},
-	{USB_DEVICE(0x046d, 0x08dd), DVNM("Logitech QuickCam for Notebooks")},
-	{USB_DEVICE(0x0471, 0x0325), DVNM("Philips SPC 200 NC")},
-	{USB_DEVICE(0x0471, 0x0326), DVNM("Philips SPC 300 NC")},
-	{USB_DEVICE(0x0471, 0x032d), DVNM("Philips spc210nc")},
-	{USB_DEVICE(0x0471, 0x032e), DVNM("Philips spc315nc")},
-	{USB_DEVICE(0x055f, 0xc005), DVNM("Mustek Wcam300A")},
+	{USB_DEVICE(0x046d, 0x08af)},
+	{USB_DEVICE(0x046d, 0x08b9)},
+	{USB_DEVICE(0x046d, 0x08d7)},
+	{USB_DEVICE(0x046d, 0x08d9)},
+	{USB_DEVICE(0x046d, 0x08d8)},
+	{USB_DEVICE(0x046d, 0x08da)},
+	{USB_DEVICE(0x046d, 0x08dd), .driver_info = SENSOR_MC501CB},
+	{USB_DEVICE(0x0471, 0x0325)},
+	{USB_DEVICE(0x0471, 0x0326)},
+	{USB_DEVICE(0x0471, 0x032d)},
+	{USB_DEVICE(0x0471, 0x032e)},
+	{USB_DEVICE(0x055f, 0xc005)},
 #ifndef CONFIG_USB_ZC0301
-	{USB_DEVICE(0x055f, 0xd003), DVNM("Mustek WCam300A")},
-	{USB_DEVICE(0x055f, 0xd004), DVNM("Mustek WCam300 AN")},
+	{USB_DEVICE(0x055f, 0xd003)},
+	{USB_DEVICE(0x055f, 0xd004)},
 #endif
-	{USB_DEVICE(0x0698, 0x2003), DVNM("CTX M730V built in")},
-	{USB_DEVICE(0x0ac8, 0x0302), DVNM("Z-star Vimicro zc0302")},
+	{USB_DEVICE(0x0698, 0x2003)},
+	{USB_DEVICE(0x0ac8, 0x0302)},
 #ifndef CONFIG_USB_ZC0301
-	{USB_DEVICE(0x0ac8, 0x301b), DVNM("Z-Star zc301b")},
-	{USB_DEVICE(0x0ac8, 0x303b), DVNM("Vimicro 0x303b")},
+	{USB_DEVICE(0x0ac8, 0x301b)},
+	{USB_DEVICE(0x0ac8, 0x303b)},
 #endif
-	{USB_DEVICE(0x0ac8, 0x305b), DVNM("Z-star Vimicro zc0305b")},
+	{USB_DEVICE(0x0ac8, 0x305b), .driver_info = SENSOR_TAS5130C_VF0250},
 #ifndef CONFIG_USB_ZC0301
-	{USB_DEVICE(0x0ac8, 0x307b), DVNM("Z-Star 307b")},
-	{USB_DEVICE(0x10fd, 0x0128), DVNM("Typhoon Webshot II 300k 0x0128")},
-	{USB_DEVICE(0x10fd, 0x8050), DVNM("Typhoon Webshot II USB 300k")},
+	{USB_DEVICE(0x0ac8, 0x307b)},
+	{USB_DEVICE(0x10fd, 0x0128)},
+	{USB_DEVICE(0x10fd, 0x8050)},
 #endif
 	{}			/* end of entry */
 };
@@ -7605,7 +7587,7 @@ static int __init sd_mod_init(void)
 {
 	if (usb_register(&sd_driver) < 0)
 		return -1;
-	PDEBUG(D_PROBE, "v%s registered", version);
+	PDEBUG(D_PROBE, "registered");
 	return 0;
 }
 
diff --git a/drivers/media/video/ivtv/Kconfig b/drivers/media/video/ivtv/Kconfig
index 5d7ee8fcdd50..0069898bddab 100644
--- a/drivers/media/video/ivtv/Kconfig
+++ b/drivers/media/video/ivtv/Kconfig
@@ -2,9 +2,7 @@ config VIDEO_IVTV
 	tristate "Conexant cx23416/cx23415 MPEG encoder/decoder support"
 	depends on VIDEO_V4L1 && VIDEO_V4L2 && PCI && I2C && EXPERIMENTAL
 	depends on INPUT   # due to VIDEO_IR
-	depends on HOTPLUG # due to FW_LOADER
 	select I2C_ALGOBIT
-	select FW_LOADER
 	select VIDEO_IR
 	select VIDEO_TUNER
 	select VIDEO_TVEEPROM
diff --git a/drivers/media/video/ivtv/ivtv-driver.c b/drivers/media/video/ivtv/ivtv-driver.c
index 41fd79279bb5..aea1664948ce 100644
--- a/drivers/media/video/ivtv/ivtv-driver.c
+++ b/drivers/media/video/ivtv/ivtv-driver.c
@@ -465,9 +465,8 @@ static void ivtv_process_eeprom(struct ivtv *itv)
 	if (itv->options.radio == -1)
 		itv->options.radio = (tv.has_radio != 0);
 	/* only enable newi2c if an IR blaster is present */
-	/* FIXME: for 2.6.20 the test against 2 should be removed */
-	if (itv->options.newi2c == -1 && tv.has_ir != -1 && tv.has_ir != 2) {
-		itv->options.newi2c = (tv.has_ir & 2) ? 1 : 0;
+	if (itv->options.newi2c == -1 && tv.has_ir) {
+		itv->options.newi2c = (tv.has_ir & 4) ? 1 : 0;
 		if (itv->options.newi2c) {
 		    IVTV_INFO("Reopen i2c bus for IR-blaster support\n");
 		    exit_ivtv_i2c(itv);
diff --git a/drivers/media/video/ivtv/ivtv-driver.h b/drivers/media/video/ivtv/ivtv-driver.h
index a08bb3331cfb..ab287b48fc2b 100644
--- a/drivers/media/video/ivtv/ivtv-driver.h
+++ b/drivers/media/video/ivtv/ivtv-driver.h
@@ -60,6 +60,7 @@
 #include <linux/dvb/video.h>
 #include <linux/dvb/audio.h>
 #include <media/v4l2-common.h>
+#include <media/v4l2-ioctl.h>
 #include <media/tuner.h>
 #include <media/cx2341x.h>
 
diff --git a/drivers/media/video/ivtv/ivtv-ioctl.c b/drivers/media/video/ivtv/ivtv-ioctl.c
index 52e00a7f3110..61030309d0ad 100644
--- a/drivers/media/video/ivtv/ivtv-ioctl.c
+++ b/drivers/media/video/ivtv/ivtv-ioctl.c
@@ -1842,69 +1842,73 @@ int ivtv_v4l2_ioctl(struct inode *inode, struct file *filp, unsigned int cmd,
 	return res;
 }
 
-void ivtv_set_funcs(struct video_device *vdev)
-{
-	vdev->vidioc_querycap     	    = ivtv_querycap;
-	vdev->vidioc_g_priority   	    = ivtv_g_priority;
-	vdev->vidioc_s_priority   	    = ivtv_s_priority;
-	vdev->vidioc_s_audio      	    = ivtv_s_audio;
-	vdev->vidioc_g_audio      	    = ivtv_g_audio;
-	vdev->vidioc_enumaudio   	    = ivtv_enumaudio;
-	vdev->vidioc_s_audout     	    = ivtv_s_audout;
-	vdev->vidioc_g_audout     	    = ivtv_g_audout;
-	vdev->vidioc_enum_input   	    = ivtv_enum_input;
-	vdev->vidioc_enum_output   	    = ivtv_enum_output;
-	vdev->vidioc_enumaudout   	    = ivtv_enumaudout;
-	vdev->vidioc_cropcap       	    = ivtv_cropcap;
-	vdev->vidioc_s_crop       	    = ivtv_s_crop;
-	vdev->vidioc_g_crop       	    = ivtv_g_crop;
-	vdev->vidioc_g_input      	    = ivtv_g_input;
-	vdev->vidioc_s_input      	    = ivtv_s_input;
-	vdev->vidioc_g_output     	    = ivtv_g_output;
-	vdev->vidioc_s_output     	    = ivtv_s_output;
-	vdev->vidioc_g_frequency 	    = ivtv_g_frequency;
-	vdev->vidioc_s_frequency  	    = ivtv_s_frequency;
-	vdev->vidioc_s_tuner      	    = ivtv_s_tuner;
-	vdev->vidioc_g_tuner      	    = ivtv_g_tuner;
-	vdev->vidioc_g_enc_index 	    = ivtv_g_enc_index;
-	vdev->vidioc_g_fbuf		    = ivtv_g_fbuf;
-	vdev->vidioc_s_fbuf		    = ivtv_s_fbuf;
-	vdev->vidioc_g_std 		    = ivtv_g_std;
-	vdev->vidioc_s_std 		    = ivtv_s_std;
-	vdev->vidioc_overlay		    = ivtv_overlay;
-	vdev->vidioc_log_status		    = ivtv_log_status;
-	vdev->vidioc_enum_fmt_vid_cap 	    = ivtv_enum_fmt_vid_cap;
-	vdev->vidioc_encoder_cmd  	    = ivtv_encoder_cmd;
-	vdev->vidioc_try_encoder_cmd 	    = ivtv_try_encoder_cmd;
-	vdev->vidioc_enum_fmt_vid_out       = ivtv_enum_fmt_vid_out;
-	vdev->vidioc_g_fmt_vid_cap  	    = ivtv_g_fmt_vid_cap;
-	vdev->vidioc_g_fmt_vbi_cap	    = ivtv_g_fmt_vbi_cap;
-	vdev->vidioc_g_fmt_sliced_vbi_cap   = ivtv_g_fmt_sliced_vbi_cap;
-	vdev->vidioc_g_fmt_vid_out          = ivtv_g_fmt_vid_out;
-	vdev->vidioc_g_fmt_vid_out_overlay  = ivtv_g_fmt_vid_out_overlay;
-	vdev->vidioc_g_fmt_sliced_vbi_out   = ivtv_g_fmt_sliced_vbi_out;
-	vdev->vidioc_s_fmt_vid_cap  	    = ivtv_s_fmt_vid_cap;
-	vdev->vidioc_s_fmt_vbi_cap 	    = ivtv_s_fmt_vbi_cap;
-	vdev->vidioc_s_fmt_sliced_vbi_cap   = ivtv_s_fmt_sliced_vbi_cap;
-	vdev->vidioc_s_fmt_vid_out          = ivtv_s_fmt_vid_out;
-	vdev->vidioc_s_fmt_vid_out_overlay  = ivtv_s_fmt_vid_out_overlay;
-	vdev->vidioc_s_fmt_sliced_vbi_out   = ivtv_s_fmt_sliced_vbi_out;
-	vdev->vidioc_try_fmt_vid_cap  	    = ivtv_try_fmt_vid_cap;
-	vdev->vidioc_try_fmt_vbi_cap	    = ivtv_try_fmt_vbi_cap;
-	vdev->vidioc_try_fmt_sliced_vbi_cap = ivtv_try_fmt_sliced_vbi_cap;
-	vdev->vidioc_try_fmt_vid_out        = ivtv_try_fmt_vid_out;
-	vdev->vidioc_try_fmt_vid_out_overlay = ivtv_try_fmt_vid_out_overlay;
-	vdev->vidioc_try_fmt_sliced_vbi_out = ivtv_try_fmt_sliced_vbi_out;
-	vdev->vidioc_g_sliced_vbi_cap 	    = ivtv_g_sliced_vbi_cap;
-	vdev->vidioc_g_chip_ident 	    = ivtv_g_chip_ident;
+static const struct v4l2_ioctl_ops ivtv_ioctl_ops = {
+	.vidioc_querycap    		    = ivtv_querycap,
+	.vidioc_g_priority  		    = ivtv_g_priority,
+	.vidioc_s_priority  		    = ivtv_s_priority,
+	.vidioc_s_audio     		    = ivtv_s_audio,
+	.vidioc_g_audio     		    = ivtv_g_audio,
+	.vidioc_enumaudio   		    = ivtv_enumaudio,
+	.vidioc_s_audout     		    = ivtv_s_audout,
+	.vidioc_g_audout     		    = ivtv_g_audout,
+	.vidioc_enum_input   		    = ivtv_enum_input,
+	.vidioc_enum_output   		    = ivtv_enum_output,
+	.vidioc_enumaudout   		    = ivtv_enumaudout,
+	.vidioc_cropcap       		    = ivtv_cropcap,
+	.vidioc_s_crop       		    = ivtv_s_crop,
+	.vidioc_g_crop       		    = ivtv_g_crop,
+	.vidioc_g_input      		    = ivtv_g_input,
+	.vidioc_s_input      		    = ivtv_s_input,
+	.vidioc_g_output     		    = ivtv_g_output,
+	.vidioc_s_output     		    = ivtv_s_output,
+	.vidioc_g_frequency 		    = ivtv_g_frequency,
+	.vidioc_s_frequency  		    = ivtv_s_frequency,
+	.vidioc_s_tuner      		    = ivtv_s_tuner,
+	.vidioc_g_tuner      		    = ivtv_g_tuner,
+	.vidioc_g_enc_index 		    = ivtv_g_enc_index,
+	.vidioc_g_fbuf			    = ivtv_g_fbuf,
+	.vidioc_s_fbuf			    = ivtv_s_fbuf,
+	.vidioc_g_std 			    = ivtv_g_std,
+	.vidioc_s_std 			    = ivtv_s_std,
+	.vidioc_overlay			    = ivtv_overlay,
+	.vidioc_log_status		    = ivtv_log_status,
+	.vidioc_enum_fmt_vid_cap 	    = ivtv_enum_fmt_vid_cap,
+	.vidioc_encoder_cmd  		    = ivtv_encoder_cmd,
+	.vidioc_try_encoder_cmd 	    = ivtv_try_encoder_cmd,
+	.vidioc_enum_fmt_vid_out 	    = ivtv_enum_fmt_vid_out,
+	.vidioc_g_fmt_vid_cap 		    = ivtv_g_fmt_vid_cap,
+	.vidioc_g_fmt_vbi_cap		    = ivtv_g_fmt_vbi_cap,
+	.vidioc_g_fmt_sliced_vbi_cap        = ivtv_g_fmt_sliced_vbi_cap,
+	.vidioc_g_fmt_vid_out               = ivtv_g_fmt_vid_out,
+	.vidioc_g_fmt_vid_out_overlay       = ivtv_g_fmt_vid_out_overlay,
+	.vidioc_g_fmt_sliced_vbi_out        = ivtv_g_fmt_sliced_vbi_out,
+	.vidioc_s_fmt_vid_cap  		    = ivtv_s_fmt_vid_cap,
+	.vidioc_s_fmt_vbi_cap 		    = ivtv_s_fmt_vbi_cap,
+	.vidioc_s_fmt_sliced_vbi_cap        = ivtv_s_fmt_sliced_vbi_cap,
+	.vidioc_s_fmt_vid_out               = ivtv_s_fmt_vid_out,
+	.vidioc_s_fmt_vid_out_overlay       = ivtv_s_fmt_vid_out_overlay,
+	.vidioc_s_fmt_sliced_vbi_out        = ivtv_s_fmt_sliced_vbi_out,
+	.vidioc_try_fmt_vid_cap  	    = ivtv_try_fmt_vid_cap,
+	.vidioc_try_fmt_vbi_cap		    = ivtv_try_fmt_vbi_cap,
+	.vidioc_try_fmt_sliced_vbi_cap      = ivtv_try_fmt_sliced_vbi_cap,
+	.vidioc_try_fmt_vid_out 	    = ivtv_try_fmt_vid_out,
+	.vidioc_try_fmt_vid_out_overlay     = ivtv_try_fmt_vid_out_overlay,
+	.vidioc_try_fmt_sliced_vbi_out 	    = ivtv_try_fmt_sliced_vbi_out,
+	.vidioc_g_sliced_vbi_cap 	    = ivtv_g_sliced_vbi_cap,
+	.vidioc_g_chip_ident 		    = ivtv_g_chip_ident,
 #ifdef CONFIG_VIDEO_ADV_DEBUG
-	vdev->vidioc_g_register 	    = ivtv_g_register;
-	vdev->vidioc_s_register 	    = ivtv_s_register;
+	.vidioc_g_register 		    = ivtv_g_register,
+	.vidioc_s_register 		    = ivtv_s_register,
 #endif
-	vdev->vidioc_default 		    = ivtv_default;
-	vdev->vidioc_queryctrl 		    = ivtv_queryctrl;
-	vdev->vidioc_querymenu 		    = ivtv_querymenu;
-	vdev->vidioc_g_ext_ctrls    	    = ivtv_g_ext_ctrls;
-	vdev->vidioc_s_ext_ctrls    	    = ivtv_s_ext_ctrls;
-	vdev->vidioc_try_ext_ctrls    	    = ivtv_try_ext_ctrls;
+	.vidioc_default 		    = ivtv_default,
+	.vidioc_queryctrl 		    = ivtv_queryctrl,
+	.vidioc_querymenu 		    = ivtv_querymenu,
+	.vidioc_g_ext_ctrls 		    = ivtv_g_ext_ctrls,
+	.vidioc_s_ext_ctrls 		    = ivtv_s_ext_ctrls,
+	.vidioc_try_ext_ctrls    	    = ivtv_try_ext_ctrls,
+};
+
+void ivtv_set_funcs(struct video_device *vdev)
+{
+	vdev->ioctl_ops = &ivtv_ioctl_ops;
 }
diff --git a/drivers/media/video/ivtv/ivtv-streams.c b/drivers/media/video/ivtv/ivtv-streams.c
index f8883b487f4a..54d2023b26c4 100644
--- a/drivers/media/video/ivtv/ivtv-streams.c
+++ b/drivers/media/video/ivtv/ivtv-streams.c
@@ -208,16 +208,11 @@ static int ivtv_prep_dev(struct ivtv *itv, int type)
 		return -ENOMEM;
 	}
 
-	s->v4l2dev->type = VID_TYPE_CAPTURE | VID_TYPE_TUNER | VID_TYPE_TELETEXT |
-		    VID_TYPE_CLIPPING | VID_TYPE_SCALES | VID_TYPE_MPEG_ENCODER;
-	if (itv->v4l2_cap & V4L2_CAP_VIDEO_OUTPUT) {
-		s->v4l2dev->type |= VID_TYPE_MPEG_DECODER;
-	}
 	snprintf(s->v4l2dev->name, sizeof(s->v4l2dev->name), "ivtv%d %s",
 			itv->num, s->name);
 
 	s->v4l2dev->minor = minor;
-	s->v4l2dev->dev = &itv->dev->dev;
+	s->v4l2dev->parent = &itv->dev->dev;
 	s->v4l2dev->fops = ivtv_stream_info[type].fops;
 	s->v4l2dev->release = video_device_release;
 	s->v4l2dev->tvnorms = V4L2_STD_ALL;
diff --git a/drivers/media/video/m52790.c b/drivers/media/video/m52790.c
index 39bf6b114d50..89a781c6929d 100644
--- a/drivers/media/video/m52790.c
+++ b/drivers/media/video/m52790.c
@@ -26,7 +26,7 @@
 #include <asm/uaccess.h>
 #include <linux/i2c.h>
 #include <linux/i2c-id.h>
-#include <linux/videodev.h>
+#include <linux/videodev2.h>
 #include <media/m52790.h>
 #include <media/v4l2-common.h>
 #include <media/v4l2-chip-ident.h>
diff --git a/drivers/media/video/meye.c b/drivers/media/video/meye.c
index 2fb5854cf6f0..7c8ef6ac6c39 100644
--- a/drivers/media/video/meye.c
+++ b/drivers/media/video/meye.c
@@ -31,6 +31,7 @@
 #include <linux/init.h>
 #include <linux/videodev.h>
 #include <media/v4l2-common.h>
+#include <media/v4l2-ioctl.h>
 #include <asm/uaccess.h>
 #include <asm/io.h>
 #include <linux/delay.h>
@@ -1697,13 +1698,7 @@ static const struct file_operations meye_fops = {
 	.llseek		= no_llseek,
 };
 
-static struct video_device meye_template = {
-	.owner		= THIS_MODULE,
-	.name		= "meye",
-	.type		= VID_TYPE_CAPTURE,
-	.fops		= &meye_fops,
-	.release	= video_device_release,
-	.minor		= -1,
+static const struct v4l2_ioctl_ops meye_ioctl_ops = {
 	.vidioc_querycap	= vidioc_querycap,
 	.vidioc_enum_input	= vidioc_enum_input,
 	.vidioc_g_input		= vidioc_g_input,
@@ -1724,6 +1719,14 @@ static struct video_device meye_template = {
 	.vidioc_default		= vidioc_default,
 };
 
+static struct video_device meye_template = {
+	.name		= "meye",
+	.fops		= &meye_fops,
+	.ioctl_ops 	= &meye_ioctl_ops,
+	.release	= video_device_release,
+	.minor		= -1,
+};
+
 #ifdef CONFIG_PM
 static int meye_suspend(struct pci_dev *pdev, pm_message_t state)
 {
@@ -1801,7 +1804,7 @@ static int __devinit meye_probe(struct pci_dev *pcidev,
 	}
 
 	memcpy(meye.video_dev, &meye_template, sizeof(meye_template));
-	meye.video_dev->dev = &meye.mchip_dev->dev;
+	meye.video_dev->parent = &meye.mchip_dev->dev;
 
 	if ((ret = sony_pic_camera_command(SONY_PIC_COMMAND_SETCAMERA, 1))) {
 		printk(KERN_ERR "meye: unable to power on the camera\n");
diff --git a/drivers/media/video/msp3400-driver.c b/drivers/media/video/msp3400-driver.c
index 5691e019d195..3da74dcee902 100644
--- a/drivers/media/video/msp3400-driver.c
+++ b/drivers/media/video/msp3400-driver.c
@@ -51,9 +51,9 @@
 #include <linux/module.h>
 #include <linux/slab.h>
 #include <linux/i2c.h>
-#include <linux/videodev.h>
 #include <linux/videodev2.h>
 #include <media/v4l2-common.h>
+#include <media/v4l2-ioctl.h>
 #include <media/v4l2-i2c-drv-legacy.h>
 #include <media/tvaudio.h>
 #include <media/msp3400.h>
diff --git a/drivers/media/video/msp3400-kthreads.c b/drivers/media/video/msp3400-kthreads.c
index 1622f70e4dd0..846a14a61fd1 100644
--- a/drivers/media/video/msp3400-kthreads.c
+++ b/drivers/media/video/msp3400-kthreads.c
@@ -25,7 +25,6 @@
 #include <linux/slab.h>
 #include <linux/i2c.h>
 #include <linux/freezer.h>
-#include <linux/videodev.h>
 #include <linux/videodev2.h>
 #include <media/v4l2-common.h>
 #include <media/msp3400.h>
diff --git a/drivers/media/video/mt9m001.c b/drivers/media/video/mt9m001.c
index ee43499544c1..554d2295484e 100644
--- a/drivers/media/video/mt9m001.c
+++ b/drivers/media/video/mt9m001.c
@@ -120,7 +120,7 @@ static int mt9m001_init(struct soc_camera_device *icd)
 	int ret;
 
 	/* Disable chip, synchronous option update */
-	dev_dbg(icd->vdev->dev, "%s\n", __func__);
+	dev_dbg(icd->vdev->parent, "%s\n", __func__);
 
 	ret = reg_write(icd, MT9M001_RESET, 1);
 	if (ret >= 0)
diff --git a/drivers/media/video/mt9v022.c b/drivers/media/video/mt9v022.c
index b31ba4e09327..56808cd2f8a9 100644
--- a/drivers/media/video/mt9v022.c
+++ b/drivers/media/video/mt9v022.c
@@ -25,7 +25,7 @@
 
 static char *sensor_type;
 module_param(sensor_type, charp, S_IRUGO);
-MODULE_PARM_DESC(sensor_type, "Sensor type: \"colour\" or \"monochrome\"\n");
+MODULE_PARM_DESC(sensor_type, "Sensor type: \"colour\" or \"monochrome\"");
 
 /* mt9v022 selected register addresses */
 #define MT9V022_CHIP_VERSION		0x00
diff --git a/drivers/media/video/ov511.c b/drivers/media/video/ov511.c
index eafb0c7736e6..9edaca4371d7 100644
--- a/drivers/media/video/ov511.c
+++ b/drivers/media/video/ov511.c
@@ -4666,9 +4666,7 @@ static const struct file_operations ov511_fops = {
 };
 
 static struct video_device vdev_template = {
-	.owner =	THIS_MODULE,
 	.name =		"OV511 USB Camera",
-	.type =		VID_TYPE_CAPTURE,
 	.fops =		&ov511_fops,
 	.release =	video_device_release,
 	.minor =	-1,
@@ -5661,43 +5659,43 @@ static int ov_create_sysfs(struct video_device *vdev)
 {
 	int rc;
 
-	rc = video_device_create_file(vdev, &dev_attr_custom_id);
+	rc = device_create_file(&vdev->dev, &dev_attr_custom_id);
 	if (rc) goto err;
-	rc = video_device_create_file(vdev, &dev_attr_model);
+	rc = device_create_file(&vdev->dev, &dev_attr_model);
 	if (rc) goto err_id;
-	rc = video_device_create_file(vdev, &dev_attr_bridge);
+	rc = device_create_file(&vdev->dev, &dev_attr_bridge);
 	if (rc) goto err_model;
-	rc = video_device_create_file(vdev, &dev_attr_sensor);
+	rc = device_create_file(&vdev->dev, &dev_attr_sensor);
 	if (rc) goto err_bridge;
-	rc = video_device_create_file(vdev, &dev_attr_brightness);
+	rc = device_create_file(&vdev->dev, &dev_attr_brightness);
 	if (rc) goto err_sensor;
-	rc = video_device_create_file(vdev, &dev_attr_saturation);
+	rc = device_create_file(&vdev->dev, &dev_attr_saturation);
 	if (rc) goto err_bright;
-	rc = video_device_create_file(vdev, &dev_attr_contrast);
+	rc = device_create_file(&vdev->dev, &dev_attr_contrast);
 	if (rc) goto err_sat;
-	rc = video_device_create_file(vdev, &dev_attr_hue);
+	rc = device_create_file(&vdev->dev, &dev_attr_hue);
 	if (rc) goto err_contrast;
-	rc = video_device_create_file(vdev, &dev_attr_exposure);
+	rc = device_create_file(&vdev->dev, &dev_attr_exposure);
 	if (rc) goto err_hue;
 
 	return 0;
 
 err_hue:
-	video_device_remove_file(vdev, &dev_attr_hue);
+	device_remove_file(&vdev->dev, &dev_attr_hue);
 err_contrast:
-	video_device_remove_file(vdev, &dev_attr_contrast);
+	device_remove_file(&vdev->dev, &dev_attr_contrast);
 err_sat:
-	video_device_remove_file(vdev, &dev_attr_saturation);
+	device_remove_file(&vdev->dev, &dev_attr_saturation);
 err_bright:
-	video_device_remove_file(vdev, &dev_attr_brightness);
+	device_remove_file(&vdev->dev, &dev_attr_brightness);
 err_sensor:
-	video_device_remove_file(vdev, &dev_attr_sensor);
+	device_remove_file(&vdev->dev, &dev_attr_sensor);
 err_bridge:
-	video_device_remove_file(vdev, &dev_attr_bridge);
+	device_remove_file(&vdev->dev, &dev_attr_bridge);
 err_model:
-	video_device_remove_file(vdev, &dev_attr_model);
+	device_remove_file(&vdev->dev, &dev_attr_model);
 err_id:
-	video_device_remove_file(vdev, &dev_attr_custom_id);
+	device_remove_file(&vdev->dev, &dev_attr_custom_id);
 err:
 	return rc;
 }
@@ -5833,7 +5831,7 @@ ov51x_probe(struct usb_interface *intf, const struct usb_device_id *id)
 		goto error;
 
 	memcpy(ov->vdev, &vdev_template, sizeof(*ov->vdev));
-	ov->vdev->dev = &intf->dev;
+	ov->vdev->parent = &intf->dev;
 	video_set_drvdata(ov->vdev, ov);
 
 	for (i = 0; i < OV511_MAX_UNIT_VIDEO; i++) {
diff --git a/drivers/media/video/ov511.h b/drivers/media/video/ov511.h
index 1010e51189b7..baded1262ca9 100644
--- a/drivers/media/video/ov511.h
+++ b/drivers/media/video/ov511.h
@@ -4,6 +4,7 @@
 #include <asm/uaccess.h>
 #include <linux/videodev.h>
 #include <media/v4l2-common.h>
+#include <media/v4l2-ioctl.h>
 #include <linux/usb.h>
 #include <linux/mutex.h>
 
diff --git a/drivers/media/video/planb.c b/drivers/media/video/planb.c
deleted file mode 100644
index 36047d4e70f6..000000000000
--- a/drivers/media/video/planb.c
+++ /dev/null
@@ -1,2309 +0,0 @@
-/*
-    planb - PlanB frame grabber driver
-
-    PlanB is used in the 7x00/8x00 series of PowerMacintosh
-    Computers as video input DMA controller.
-
-    Copyright (C) 1998 Michel Lanners (mlan@cpu.lu)
-
-    Based largely on the bttv driver by Ralph Metzler (rjkm@thp.uni-koeln.de)
-
-    Additional debugging and coding by Takashi Oe (toe@unlserve.unl.edu)
-
-    This program is free software; you can redistribute it and/or modify
-    it under the terms of the GNU General Public License as published by
-    the Free Software Foundation; either version 2 of the License, or
-    (at your option) any later version.
-
-    This program is distributed in the hope that it will be useful,
-    but WITHOUT ANY WARRANTY; without even the implied warranty of
-    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-    GNU General Public License for more details.
-
-    You should have received a copy of the GNU General Public License
-    along with this program; if not, write to the Free Software
-    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-*/
-
-/* $Id: planb.c,v 1.18 1999/05/02 17:36:34 mlan Exp $ */
-
-#include <linux/init.h>
-#include <linux/errno.h>
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/major.h>
-#include <linux/slab.h>
-#include <linux/types.h>
-#include <linux/pci.h>
-#include <linux/delay.h>
-#include <linux/vmalloc.h>
-#include <linux/mm.h>
-#include <linux/sched.h>
-#include <linux/videodev.h>
-#include <media/v4l2-common.h>
-#include <linux/wait.h>
-#include <asm/uaccess.h>
-#include <asm/io.h>
-#include <asm/prom.h>
-#include <asm/dbdma.h>
-#include <asm/pgtable.h>
-#include <asm/page.h>
-#include <asm/irq.h>
-#include <linux/mutex.h>
-
-#include "planb.h"
-#include "saa7196.h"
-
-/* Would you mind for some ugly debugging? */
-#if 0
-#define DEBUG(x...) printk(KERN_DEBUG ## x) /* Debug driver */
-#else
-#define DEBUG(x...) 		/* Don't debug driver */
-#endif
-
-#if 0
-#define IDEBUG(x...) printk(KERN_DEBUG ## x) /* Debug interrupt part */
-#else
-#define IDEBUG(x...) 		/* Don't debug interrupt part */
-#endif
-
-/* Ever seen a Mac with more than 1 of these? */
-#define PLANB_MAX 1
-
-static int planb_num;
-static struct planb planbs[PLANB_MAX];
-static volatile struct planb_registers *planb_regs;
-
-static int def_norm = PLANB_DEF_NORM;	/* default norm */
-static int video_nr = -1;
-
-module_param(def_norm, int, 0);
-MODULE_PARM_DESC(def_norm, "Default startup norm (0=PAL, 1=NTSC, 2=SECAM)");
-module_param(video_nr, int, 0);
-MODULE_LICENSE("GPL");
-
-
-/* ------------------ PlanB Exported Functions ------------------ */
-static long planb_write(struct video_device *, const char *, unsigned long, int);
-static long planb_read(struct video_device *, char *, unsigned long, int);
-static int planb_open(struct video_device *, int);
-static void planb_close(struct video_device *);
-static int planb_ioctl(struct video_device *, unsigned int, void *);
-static int planb_init_done(struct video_device *);
-static int planb_mmap(struct video_device *, const char *, unsigned long);
-static void release_planb(void);
-int init_planbs(struct video_init *);
-
-/* ------------------ PlanB Internal Functions ------------------ */
-static int planb_prepare_open(struct planb *);
-static void planb_prepare_close(struct planb *);
-static void saa_write_reg(unsigned char, unsigned char);
-static unsigned char saa_status(int, struct planb *);
-static void saa_set(unsigned char, unsigned char, struct planb *);
-static void saa_init_regs(struct planb *);
-static int grabbuf_alloc(struct planb *);
-static int vgrab(struct planb *, struct video_mmap *);
-static void add_clip(struct planb *, struct video_clip *);
-static void fill_cmd_buff(struct planb *);
-static void cmd_buff(struct planb *);
-static volatile struct dbdma_cmd *setup_grab_cmd(int, struct planb *);
-static void overlay_start(struct planb *);
-static void overlay_stop(struct planb *);
-static inline void tab_cmd_dbdma(volatile struct dbdma_cmd *, unsigned short,
-	unsigned int);
-static inline void tab_cmd_store(volatile struct dbdma_cmd *, unsigned int,
-	unsigned int);
-static inline void tab_cmd_gen(volatile struct dbdma_cmd *, unsigned short,
-	unsigned short, unsigned int, unsigned int);
-static int init_planb(struct planb *);
-static int find_planb(void);
-static void planb_pre_capture(int, int, struct planb *);
-static volatile struct dbdma_cmd *cmd_geo_setup(volatile struct dbdma_cmd *,
-					int, int, int, int, int, struct planb *);
-static inline void planb_dbdma_stop(volatile struct dbdma_regs *);
-static unsigned int saa_geo_setup(int, int, int, int, struct planb *);
-static inline int overlay_is_active(struct planb *);
-
-/*******************************/
-/* Memory management functions */
-/*******************************/
-
-static int grabbuf_alloc(struct planb *pb)
-{
-	int i, npage;
-
-	npage = MAX_GBUFFERS * ((PLANB_MAX_FBUF / PAGE_SIZE + 1)
-#ifndef PLANB_GSCANLINE
-		+ MAX_LNUM
-#endif /* PLANB_GSCANLINE */
-		);
-	if ((pb->rawbuf = kmalloc(npage
-				* sizeof(unsigned long), GFP_KERNEL)) == 0)
-		return -ENOMEM;
-	for (i = 0; i < npage; i++) {
-		pb->rawbuf[i] = (unsigned char *)__get_free_pages(GFP_KERNEL
-								|GFP_DMA, 0);
-		if (!pb->rawbuf[i])
-			break;
-		SetPageReserved(virt_to_page(pb->rawbuf[i]));
-	}
-	if (i-- < npage) {
-		printk(KERN_DEBUG "PlanB: init_grab: grab buffer not allocated\n");
-		for (; i > 0; i--) {
-			ClearPageReserved(virt_to_page(pb->rawbuf[i]));
-			free_pages((unsigned long)pb->rawbuf[i], 0);
-		}
-		kfree(pb->rawbuf);
-		return -ENOBUFS;
-	}
-	pb->rawbuf_size = npage;
-	return 0;
-}
-
-/*****************************/
-/* Hardware access functions */
-/*****************************/
-
-static void saa_write_reg(unsigned char addr, unsigned char val)
-{
-	planb_regs->saa_addr = addr; eieio();
-	planb_regs->saa_regval = val; eieio();
-	return;
-}
-
-/* return  status byte 0 or 1: */
-static unsigned char saa_status(int byte, struct planb *pb)
-{
-	saa_regs[pb->win.norm][SAA7196_STDC] =
-		(saa_regs[pb->win.norm][SAA7196_STDC] & ~2) | ((byte & 1) << 1);
-	saa_write_reg (SAA7196_STDC, saa_regs[pb->win.norm][SAA7196_STDC]);
-
-	/* Let's wait 30msec for this one */
-	msleep_interruptible(30);
-
-	return (unsigned char)in_8 (&planb_regs->saa_status);
-}
-
-static void saa_set(unsigned char addr, unsigned char val, struct planb *pb)
-{
-	if(saa_regs[pb->win.norm][addr] != val) {
-		saa_regs[pb->win.norm][addr] = val;
-		saa_write_reg (addr, val);
-	}
-	return;
-}
-
-static void saa_init_regs(struct planb *pb)
-{
-	int i;
-
-	for (i = 0; i < SAA7196_NUMREGS; i++)
-		saa_write_reg (i, saa_regs[pb->win.norm][i]);
-}
-
-static unsigned int saa_geo_setup(int width, int height, int interlace, int bpp,
-	struct planb *pb)
-{
-	int ht, norm = pb->win.norm;
-
-	switch(bpp) {
-	case 2:
-		/* RGB555+a 1x16-bit + 16-bit transparent */
-		saa_regs[norm][SAA7196_FMTS] &= ~0x3;
-		break;
-	case 1:
-	case 4:
-		/* RGB888 1x24-bit + 8-bit transparent */
-		saa_regs[norm][SAA7196_FMTS] &= ~0x1;
-		saa_regs[norm][SAA7196_FMTS] |= 0x2;
-		break;
-	default:
-		return -EINVAL;
-	}
-	ht = (interlace ? height / 2 : height);
-	saa_regs[norm][SAA7196_OUTPIX] = (unsigned char) (width & 0x00ff);
-	saa_regs[norm][SAA7196_HFILT] = (saa_regs[norm][SAA7196_HFILT] & ~0x3)
-						| (width >> 8 & 0x3);
-	saa_regs[norm][SAA7196_OUTLINE] = (unsigned char) (ht & 0xff);
-	saa_regs[norm][SAA7196_VYP] = (saa_regs[norm][SAA7196_VYP] & ~0x3)
-						| (ht >> 8 & 0x3);
-	/* feed both fields if interlaced, or else feed only even fields */
-	saa_regs[norm][SAA7196_FMTS] = (interlace) ?
-					(saa_regs[norm][SAA7196_FMTS] & ~0x60)
-					: (saa_regs[norm][SAA7196_FMTS] | 0x60);
-	/* transparent mode; extended format enabled */
-	saa_regs[norm][SAA7196_DPATH] |= 0x3;
-
-	return 0;
-}
-
-/***************************/
-/* DBDMA support functions */
-/***************************/
-
-static inline void planb_dbdma_restart(volatile struct dbdma_regs *ch)
-{
-	out_le32(&ch->control, PLANB_CLR(RUN));
-	out_le32(&ch->control, PLANB_SET(RUN|WAKE) | PLANB_CLR(PAUSE));
-}
-
-static inline void planb_dbdma_stop(volatile struct dbdma_regs *ch)
-{
-	int i = 0;
-
-	out_le32(&ch->control, PLANB_CLR(RUN) | PLANB_SET(FLUSH));
-	while((in_le32(&ch->status) == (ACTIVE | FLUSH)) && (i < 999)) {
-		IDEBUG("PlanB: waiting for DMA to stop\n");
-		i++;
-	}
-}
-
-static inline void tab_cmd_dbdma(volatile struct dbdma_cmd *ch,
-	unsigned short command, unsigned int cmd_dep)
-{
-	st_le16(&ch->command, command);
-	st_le32(&ch->cmd_dep, cmd_dep);
-}
-
-static inline void tab_cmd_store(volatile struct dbdma_cmd *ch,
-	unsigned int phy_addr, unsigned int cmd_dep)
-{
-	st_le16(&ch->command, STORE_WORD | KEY_SYSTEM);
-	st_le16(&ch->req_count, 4);
-	st_le32(&ch->phy_addr, phy_addr);
-	st_le32(&ch->cmd_dep, cmd_dep);
-}
-
-static inline void tab_cmd_gen(volatile struct dbdma_cmd *ch,
-	unsigned short command, unsigned short req_count,
-	unsigned int phy_addr, unsigned int cmd_dep)
-{
-	st_le16(&ch->command, command);
-	st_le16(&ch->req_count, req_count);
-	st_le32(&ch->phy_addr, phy_addr);
-	st_le32(&ch->cmd_dep, cmd_dep);
-}
-
-static volatile struct dbdma_cmd *cmd_geo_setup(
-	volatile struct dbdma_cmd *c1, int width, int height, int interlace,
-	int bpp, int clip, struct planb *pb)
-{
-	int norm = pb->win.norm;
-
-	if((saa_geo_setup(width, height, interlace, bpp, pb)) != 0)
-		return (volatile struct dbdma_cmd *)NULL;
-	tab_cmd_store(c1++, (unsigned)(&pb->planb_base_phys->saa_addr),
-							SAA7196_FMTS);
-	tab_cmd_store(c1++, (unsigned)(&pb->planb_base_phys->saa_regval),
-					saa_regs[norm][SAA7196_FMTS]);
-	tab_cmd_store(c1++, (unsigned)(&pb->planb_base_phys->saa_addr),
-							SAA7196_DPATH);
-	tab_cmd_store(c1++, (unsigned)(&pb->planb_base_phys->saa_regval),
-					saa_regs[norm][SAA7196_DPATH]);
-	tab_cmd_store(c1++, (unsigned)(&pb->planb_base_phys->even),
-					bpp | ((clip)? PLANB_CLIPMASK: 0));
-	tab_cmd_store(c1++, (unsigned)(&pb->planb_base_phys->odd),
-					bpp | ((clip)? PLANB_CLIPMASK: 0));
-	tab_cmd_store(c1++, (unsigned)(&pb->planb_base_phys->saa_addr),
-							SAA7196_OUTPIX);
-	tab_cmd_store(c1++, (unsigned)(&pb->planb_base_phys->saa_regval),
-					saa_regs[norm][SAA7196_OUTPIX]);
-	tab_cmd_store(c1++, (unsigned)(&pb->planb_base_phys->saa_addr),
-							SAA7196_HFILT);
-	tab_cmd_store(c1++, (unsigned)(&pb->planb_base_phys->saa_regval),
-					saa_regs[norm][SAA7196_HFILT]);
-	tab_cmd_store(c1++, (unsigned)(&pb->planb_base_phys->saa_addr),
-							SAA7196_OUTLINE);
-	tab_cmd_store(c1++, (unsigned)(&pb->planb_base_phys->saa_regval),
-					saa_regs[norm][SAA7196_OUTLINE]);
-	tab_cmd_store(c1++, (unsigned)(&pb->planb_base_phys->saa_addr),
-							SAA7196_VYP);
-	tab_cmd_store(c1++, (unsigned)(&pb->planb_base_phys->saa_regval),
-					saa_regs[norm][SAA7196_VYP]);
-	return c1;
-}
-
-/******************************/
-/* misc. supporting functions */
-/******************************/
-
-static inline void planb_lock(struct planb *pb)
-{
-	mutex_lock(&pb->lock);
-}
-
-static inline void planb_unlock(struct planb *pb)
-{
-	mutex_unlock(&pb->lock);
-}
-
-/***************/
-/* Driver Core */
-/***************/
-
-static int planb_prepare_open(struct planb *pb)
-{
-	int	i, size;
-
-	/* allocate memory for two plus alpha command buffers (size: max lines,
-	   plus 40 commands handling, plus 1 alignment), plus dummy command buf,
-	   plus clipmask buffer, plus frame grabbing status */
-	size = (pb->tab_size*(2+MAX_GBUFFERS*TAB_FACTOR)+1+MAX_GBUFFERS
-		* PLANB_DUMMY)*sizeof(struct dbdma_cmd)
-		+(PLANB_MAXLINES*((PLANB_MAXPIXELS+7)& ~7))/8
-		+MAX_GBUFFERS*sizeof(unsigned int);
-	if ((pb->priv_space = kzalloc (size, GFP_KERNEL)) == 0)
-		return -ENOMEM;
-	pb->overlay_last1 = pb->ch1_cmd = (volatile struct dbdma_cmd *)
-						DBDMA_ALIGN (pb->priv_space);
-	pb->overlay_last2 = pb->ch2_cmd = pb->ch1_cmd + pb->tab_size;
-	pb->ch1_cmd_phys = virt_to_bus(pb->ch1_cmd);
-	pb->cap_cmd[0] = pb->ch2_cmd + pb->tab_size;
-	pb->pre_cmd[0] = pb->cap_cmd[0] + pb->tab_size * TAB_FACTOR;
-	for (i = 1; i < MAX_GBUFFERS; i++) {
-		pb->cap_cmd[i] = pb->pre_cmd[i-1] + PLANB_DUMMY;
-		pb->pre_cmd[i] = pb->cap_cmd[i] + pb->tab_size * TAB_FACTOR;
-	}
-	pb->frame_stat=(volatile unsigned int *)(pb->pre_cmd[MAX_GBUFFERS-1]
-						+ PLANB_DUMMY);
-	pb->mask = (unsigned char *)(pb->frame_stat+MAX_GBUFFERS);
-
-	pb->rawbuf = NULL;
-	pb->rawbuf_size = 0;
-	pb->grabbing = 0;
-	for (i = 0; i < MAX_GBUFFERS; i++) {
-		pb->frame_stat[i] = GBUFFER_UNUSED;
-		pb->gwidth[i] = 0;
-		pb->gheight[i] = 0;
-		pb->gfmt[i] = 0;
-		pb->gnorm_switch[i] = 0;
-#ifndef PLANB_GSCANLINE
-		pb->lsize[i] = 0;
-		pb->lnum[i] = 0;
-#endif /* PLANB_GSCANLINE */
-	}
-	pb->gcount = 0;
-	pb->suspend = 0;
-	pb->last_fr = -999;
-	pb->prev_last_fr = -999;
-
-	/* Reset DMA controllers */
-	planb_dbdma_stop(&pb->planb_base->ch2);
-	planb_dbdma_stop(&pb->planb_base->ch1);
-
-	return 0;
-}
-
-static void planb_prepare_close(struct planb *pb)
-{
-	int i;
-
-	/* make sure the dma's are idle */
-	planb_dbdma_stop(&pb->planb_base->ch2);
-	planb_dbdma_stop(&pb->planb_base->ch1);
-	/* free kernel memory of command buffers */
-	if(pb->priv_space != 0) {
-		kfree (pb->priv_space);
-		pb->priv_space = 0;
-		pb->cmd_buff_inited = 0;
-	}
-	if(pb->rawbuf) {
-		for (i = 0; i < pb->rawbuf_size; i++) {
-			ClearPageReserved(virt_to_page(pb->rawbuf[i]));
-			free_pages((unsigned long)pb->rawbuf[i], 0);
-		}
-		kfree(pb->rawbuf);
-	}
-	pb->rawbuf = NULL;
-}
-
-/*****************************/
-/* overlay support functions */
-/*****************************/
-
-static inline int overlay_is_active(struct planb *pb)
-{
-	unsigned int size = pb->tab_size * sizeof(struct dbdma_cmd);
-	unsigned int caddr = (unsigned)in_le32(&pb->planb_base->ch1.cmdptr);
-
-	return (in_le32(&pb->overlay_last1->cmd_dep) == pb->ch1_cmd_phys)
-			&& (caddr < (pb->ch1_cmd_phys + size))
-			&& (caddr >= (unsigned)pb->ch1_cmd_phys);
-}
-
-static void overlay_start(struct planb *pb)
-{
-
-	DEBUG("PlanB: overlay_start()\n");
-
-	if(ACTIVE & in_le32(&pb->planb_base->ch1.status)) {
-
-		DEBUG("PlanB: presumably, grabbing is in progress...\n");
-
-		planb_dbdma_stop(&pb->planb_base->ch2);
-		out_le32 (&pb->planb_base->ch2.cmdptr,
-						virt_to_bus(pb->ch2_cmd));
-		planb_dbdma_restart(&pb->planb_base->ch2);
-		st_le16 (&pb->ch1_cmd->command, DBDMA_NOP);
-		tab_cmd_dbdma(pb->last_cmd[pb->last_fr],
-					DBDMA_NOP | BR_ALWAYS,
-					virt_to_bus(pb->ch1_cmd));
-		eieio();
-		pb->prev_last_fr = pb->last_fr;
-		pb->last_fr = -2;
-		if(!(ACTIVE & in_le32(&pb->planb_base->ch1.status))) {
-			IDEBUG("PlanB: became inactive "
-				"in the mean time... reactivating\n");
-			planb_dbdma_stop(&pb->planb_base->ch1);
-			out_le32 (&pb->planb_base->ch1.cmdptr,
-						virt_to_bus(pb->ch1_cmd));
-			planb_dbdma_restart(&pb->planb_base->ch1);
-		}
-	} else {
-
-		DEBUG("PlanB: currently idle, so can do whatever\n");
-
-		planb_dbdma_stop(&pb->planb_base->ch2);
-		planb_dbdma_stop(&pb->planb_base->ch1);
-		st_le32 (&pb->planb_base->ch2.cmdptr,
-						virt_to_bus(pb->ch2_cmd));
-		st_le32 (&pb->planb_base->ch1.cmdptr,
-						virt_to_bus(pb->ch1_cmd));
-		out_le16 (&pb->ch1_cmd->command, DBDMA_NOP);
-		planb_dbdma_restart(&pb->planb_base->ch2);
-		planb_dbdma_restart(&pb->planb_base->ch1);
-		pb->last_fr = -1;
-	}
-	return;
-}
-
-static void overlay_stop(struct planb *pb)
-{
-	DEBUG("PlanB: overlay_stop()\n");
-
-	if(pb->last_fr == -1) {
-
-		DEBUG("PlanB: no grabbing, it seems...\n");
-
-		planb_dbdma_stop(&pb->planb_base->ch2);
-		planb_dbdma_stop(&pb->planb_base->ch1);
-		pb->last_fr = -999;
-	} else if(pb->last_fr == -2) {
-		unsigned int cmd_dep;
-		tab_cmd_dbdma(pb->cap_cmd[pb->prev_last_fr], DBDMA_STOP, 0);
-		eieio();
-		cmd_dep = (unsigned int)in_le32(&pb->overlay_last1->cmd_dep);
-		if(overlay_is_active(pb)) {
-
-			DEBUG("PlanB: overlay is currently active\n");
-
-			planb_dbdma_stop(&pb->planb_base->ch2);
-			planb_dbdma_stop(&pb->planb_base->ch1);
-			if(cmd_dep != pb->ch1_cmd_phys) {
-				out_le32(&pb->planb_base->ch1.cmdptr,
-						virt_to_bus(pb->overlay_last1));
-				planb_dbdma_restart(&pb->planb_base->ch1);
-			}
-		}
-		pb->last_fr = pb->prev_last_fr;
-		pb->prev_last_fr = -999;
-	}
-	return;
-}
-
-static void suspend_overlay(struct planb *pb)
-{
-	int fr = -1;
-	struct dbdma_cmd last;
-
-	DEBUG("PlanB: suspend_overlay: %d\n", pb->suspend);
-
-	if(pb->suspend++)
-		return;
-	if(ACTIVE & in_le32(&pb->planb_base->ch1.status)) {
-		if(pb->last_fr == -2) {
-			fr = pb->prev_last_fr;
-			memcpy(&last, (void*)pb->last_cmd[fr], sizeof(last));
-			tab_cmd_dbdma(pb->last_cmd[fr], DBDMA_STOP, 0);
-		}
-		if(overlay_is_active(pb)) {
-			planb_dbdma_stop(&pb->planb_base->ch2);
-			planb_dbdma_stop(&pb->planb_base->ch1);
-			pb->suspended.overlay = 1;
-			pb->suspended.frame = fr;
-			memcpy(&pb->suspended.cmd, &last, sizeof(last));
-			return;
-		}
-	}
-	pb->suspended.overlay = 0;
-	pb->suspended.frame = fr;
-	memcpy(&pb->suspended.cmd, &last, sizeof(last));
-	return;
-}
-
-static void resume_overlay(struct planb *pb)
-{
-
-	DEBUG("PlanB: resume_overlay: %d\n", pb->suspend);
-
-	if(pb->suspend > 1)
-		return;
-	if(pb->suspended.frame != -1) {
-		memcpy((void*)pb->last_cmd[pb->suspended.frame],
-				&pb->suspended.cmd, sizeof(pb->suspended.cmd));
-	}
-	if(ACTIVE & in_le32(&pb->planb_base->ch1.status)) {
-		goto finish;
-	}
-	if(pb->suspended.overlay) {
-
-		DEBUG("PlanB: overlay being resumed\n");
-
-		st_le16 (&pb->ch1_cmd->command, DBDMA_NOP);
-		st_le16 (&pb->ch2_cmd->command, DBDMA_NOP);
-		/* Set command buffer addresses */
-		st_le32(&pb->planb_base->ch1.cmdptr,
-					virt_to_bus(pb->overlay_last1));
-		out_le32(&pb->planb_base->ch2.cmdptr,
-					virt_to_bus(pb->overlay_last2));
-		/* Start the DMA controller */
-		out_le32 (&pb->planb_base->ch2.control,
-				PLANB_CLR(PAUSE) | PLANB_SET(RUN|WAKE));
-		out_le32 (&pb->planb_base->ch1.control,
-				PLANB_CLR(PAUSE) | PLANB_SET(RUN|WAKE));
-	} else if(pb->suspended.frame != -1) {
-		out_le32(&pb->planb_base->ch1.cmdptr,
-				virt_to_bus(pb->last_cmd[pb->suspended.frame]));
-		out_le32 (&pb->planb_base->ch1.control,
-				PLANB_CLR(PAUSE) | PLANB_SET(RUN|WAKE));
-	}
-
-finish:
-	pb->suspend--;
-	wake_up_interruptible(&pb->suspendq);
-}
-
-static void add_clip(struct planb *pb, struct video_clip *clip)
-{
-	volatile unsigned char	*base;
-	int	xc = clip->x, yc = clip->y;
-	int	wc = clip->width, hc = clip->height;
-	int	ww = pb->win.width, hw = pb->win.height;
-	int	x, y, xtmp1, xtmp2;
-
-	DEBUG("PlanB: clip %dx%d+%d+%d\n", wc, hc, xc, yc);
-
-	if(xc < 0) {
-		wc += xc;
-		xc = 0;
-	}
-	if(yc < 0) {
-		hc += yc;
-		yc = 0;
-	}
-	if(xc + wc > ww)
-		wc = ww - xc;
-	if(wc <= 0) /* Nothing to do */
-		return;
-	if(yc + hc > hw)
-		hc = hw - yc;
-
-	for (y = yc; y < yc+hc; y++) {
-		xtmp1=xc>>3;
-		xtmp2=(xc+wc)>>3;
-		base = pb->mask + y*96;
-		if(xc != 0 || wc >= 8)
-			*(base + xtmp1) &= (unsigned char)(0x00ff &
-				(0xff00 >> (xc&7)));
-		for (x = xtmp1 + 1; x < xtmp2; x++) {
-			*(base + x) = 0;
-		}
-		if(xc < (ww & ~0x7))
-			*(base + xtmp2) &= (unsigned char)(0x00ff >>
-				((xc+wc) & 7));
-	}
-
-	return;
-}
-
-static void fill_cmd_buff(struct planb *pb)
-{
-	int restore = 0;
-	volatile struct dbdma_cmd last;
-
-	DEBUG("PlanB: fill_cmd_buff()\n");
-
-	if(pb->overlay_last1 != pb->ch1_cmd) {
-		restore = 1;
-		last = *(pb->overlay_last1);
-	}
-	memset ((void *) pb->ch1_cmd, 0, 2 * pb->tab_size
-					* sizeof(struct dbdma_cmd));
-	cmd_buff (pb);
-	if(restore)
-		*(pb->overlay_last1) = last;
-	if(pb->suspended.overlay) {
-		unsigned long jump_addr = in_le32(&pb->overlay_last1->cmd_dep);
-		if(jump_addr != pb->ch1_cmd_phys) {
-			int i;
-
-			DEBUG("PlanB: adjusting ch1's jump address\n");
-
-			for(i = 0; i < MAX_GBUFFERS; i++) {
-				if(pb->need_pre_capture[i]) {
-				    if(jump_addr == virt_to_bus(pb->pre_cmd[i]))
-					goto found;
-				} else {
-				    if(jump_addr == virt_to_bus(pb->cap_cmd[i]))
-					goto found;
-				}
-			}
-
-			DEBUG("PlanB: not found...\n");
-
-			goto out;
-found:
-			if(pb->need_pre_capture[i])
-				out_le32(&pb->pre_cmd[i]->phy_addr,
-						virt_to_bus(pb->overlay_last1));
-			else
-				out_le32(&pb->cap_cmd[i]->phy_addr,
-						virt_to_bus(pb->overlay_last1));
-		}
-	}
-out:
-	pb->cmd_buff_inited = 1;
-
-	return;
-}
-
-static void cmd_buff(struct planb *pb)
-{
-	int		i, bpp, count, nlines, stepsize, interlace;
-	unsigned long	base, jump, addr_com, addr_dep;
-	volatile struct dbdma_cmd *c1 = pb->ch1_cmd;
-	volatile struct dbdma_cmd *c2 = pb->ch2_cmd;
-
-	interlace = pb->win.interlace;
-	bpp = pb->win.bpp;
-	count = (bpp * ((pb->win.x + pb->win.width > pb->win.swidth) ?
-		(pb->win.swidth - pb->win.x) : pb->win.width));
-	nlines = ((pb->win.y + pb->win.height > pb->win.sheight) ?
-		(pb->win.sheight - pb->win.y) : pb->win.height);
-
-	/* Do video in: */
-
-	/* Preamble commands: */
-	addr_com = virt_to_bus(c1);
-	addr_dep = virt_to_bus(&c1->cmd_dep);
-	tab_cmd_dbdma(c1++, DBDMA_NOP, 0);
-	jump = virt_to_bus(c1+16); /* 14 by cmd_geo_setup() and 2 for padding */
-	if((c1 = cmd_geo_setup(c1, pb->win.width, pb->win.height, interlace,
-					bpp, 1, pb)) == NULL) {
-		printk(KERN_WARNING "PlanB: encountered serious problems\n");
-		tab_cmd_dbdma(pb->ch1_cmd + 1, DBDMA_STOP, 0);
-		tab_cmd_dbdma(pb->ch2_cmd + 1, DBDMA_STOP, 0);
-		return;
-	}
-	tab_cmd_store(c1++, addr_com, (unsigned)(DBDMA_NOP | BR_ALWAYS) << 16);
-	tab_cmd_store(c1++, addr_dep, jump);
-	tab_cmd_store(c1++, (unsigned)(&pb->planb_base_phys->ch1.wait_sel),
-							PLANB_SET(FIELD_SYNC));
-		/* (1) wait for field sync to be set */
-	tab_cmd_dbdma(c1++, DBDMA_NOP | WAIT_IFCLR, 0);
-	tab_cmd_store(c1++, (unsigned)(&pb->planb_base_phys->ch1.br_sel),
-							PLANB_SET(ODD_FIELD));
-		/* wait for field sync to be cleared */
-	tab_cmd_dbdma(c1++, DBDMA_NOP | WAIT_IFSET, 0);
-		/* if not odd field, wait until field sync is set again */
-	tab_cmd_dbdma(c1, DBDMA_NOP | BR_IFSET, virt_to_bus(c1-3)); c1++;
-		/* assert ch_sync to ch2 */
-	tab_cmd_store(c1++, (unsigned)(&pb->planb_base_phys->ch2.control),
-							PLANB_SET(CH_SYNC));
-	tab_cmd_store(c1++, (unsigned)(&pb->planb_base_phys->ch1.br_sel),
-							PLANB_SET(DMA_ABORT));
-
-	base = (pb->frame_buffer_phys + pb->offset + pb->win.y * (pb->win.bpl
-					+ pb->win.pad) + pb->win.x * bpp);
-
-	if (interlace) {
-		stepsize = 2;
-		jump = virt_to_bus(c1 + (nlines + 1) / 2);
-	} else {
-		stepsize = 1;
-		jump = virt_to_bus(c1 + nlines);
-	}
-
-	/* even field data: */
-	for (i=0; i < nlines; i += stepsize, c1++)
-		tab_cmd_gen(c1, INPUT_MORE | KEY_STREAM0 | BR_IFSET,
-			count, base + i * (pb->win.bpl + pb->win.pad), jump);
-
-	/* For non-interlaced, we use even fields only */
-	if (!interlace)
-		goto cmd_tab_data_end;
-
-	/* Resync to odd field */
-		/* (2) wait for field sync to be set */
-	tab_cmd_dbdma(c1++, DBDMA_NOP | WAIT_IFCLR, 0);
-	tab_cmd_store(c1++, (unsigned)(&pb->planb_base_phys->ch1.br_sel),
-							PLANB_SET(ODD_FIELD));
-		/* wait for field sync to be cleared */
-	tab_cmd_dbdma(c1++, DBDMA_NOP | WAIT_IFSET, 0);
-		/* if not odd field, wait until field sync is set again */
-	tab_cmd_dbdma(c1, DBDMA_NOP | BR_IFCLR, virt_to_bus(c1-3)); c1++;
-		/* assert ch_sync to ch2 */
-	tab_cmd_store(c1++, (unsigned)(&pb->planb_base_phys->ch2.control),
-							PLANB_SET(CH_SYNC));
-	tab_cmd_store(c1++, (unsigned)(&pb->planb_base_phys->ch1.br_sel),
-							PLANB_SET(DMA_ABORT));
-
-	/* odd field data: */
-	jump = virt_to_bus(c1 + nlines / 2);
-	for (i=1; i < nlines; i += stepsize, c1++)
-		tab_cmd_gen(c1, INPUT_MORE | KEY_STREAM0 | BR_IFSET, count,
-			base + i * (pb->win.bpl + pb->win.pad), jump);
-
-	/* And jump back to the start */
-cmd_tab_data_end:
-	pb->overlay_last1 = c1;	/* keep a pointer to the last command */
-	tab_cmd_dbdma(c1, DBDMA_NOP | BR_ALWAYS, virt_to_bus(pb->ch1_cmd));
-
-	/* Clipmask command buffer */
-
-	/* Preamble commands: */
-	tab_cmd_dbdma(c2++, DBDMA_NOP, 0);
-	tab_cmd_store(c2++, (unsigned)(&pb->planb_base_phys->ch2.wait_sel),
-							PLANB_SET(CH_SYNC));
-		/* wait until ch1 asserts ch_sync */
-	tab_cmd_dbdma(c2++, DBDMA_NOP | WAIT_IFCLR, 0);
-		/* clear ch_sync asserted by ch1 */
-	tab_cmd_store(c2++, (unsigned)(&pb->planb_base_phys->ch2.control),
-							PLANB_CLR(CH_SYNC));
-	tab_cmd_store(c2++, (unsigned)(&pb->planb_base_phys->ch2.wait_sel),
-							PLANB_SET(FIELD_SYNC));
-	tab_cmd_store(c2++, (unsigned)(&pb->planb_base_phys->ch2.br_sel),
-							PLANB_SET(ODD_FIELD));
-
-	/* jump to end of even field if appropriate */
-	/* this points to (interlace)? pos. C: pos. B */
-	jump = (interlace) ? virt_to_bus(c2 + (nlines + 1) / 2 + 2):
-						virt_to_bus(c2 + nlines + 2);
-		/* if odd field, skip over to odd field clipmasking */
-	tab_cmd_dbdma(c2++, DBDMA_NOP | BR_IFSET, jump);
-
-	/* even field mask: */
-	tab_cmd_store(c2++, (unsigned)(&pb->planb_base_phys->ch2.br_sel),
-							PLANB_SET(DMA_ABORT));
-	/* this points to pos. B */
-	jump = (interlace) ? virt_to_bus(c2 + nlines + 1):
-						virt_to_bus(c2 + nlines);
-	base = virt_to_bus(pb->mask);
-	for (i=0; i < nlines; i += stepsize, c2++)
-		tab_cmd_gen(c2, OUTPUT_MORE | KEY_STREAM0 | BR_IFSET, 96,
-			base + i * 96, jump);
-
-	/* For non-interlaced, we use only even fields */
-	if(!interlace)
-		goto cmd_tab_mask_end;
-
-	/* odd field mask: */
-/* C */	tab_cmd_store(c2++, (unsigned)(&pb->planb_base_phys->ch2.br_sel),
-							PLANB_SET(DMA_ABORT));
-	/* this points to pos. B */
-	jump = virt_to_bus(c2 + nlines / 2);
-	base = virt_to_bus(pb->mask);
-	for (i=1; i < nlines; i += 2, c2++)     /* abort if set */
-		tab_cmd_gen(c2, OUTPUT_MORE | KEY_STREAM0 | BR_IFSET, 96,
-			base + i * 96, jump);
-
-	/* Inform channel 1 and jump back to start */
-cmd_tab_mask_end:
-	/* ok, I just realized this is kind of flawed. */
-	/* this part is reached only after odd field clipmasking. */
-	/* wanna clean up? */
-		/* wait for field sync to be set */
-		/* corresponds to fsync (1) of ch1 */
-/* B */	tab_cmd_dbdma(c2++, DBDMA_NOP | WAIT_IFCLR, 0);
-		/* restart ch1, meant to clear any dead bit or something */
-	tab_cmd_store(c2++, (unsigned)(&pb->planb_base_phys->ch1.control),
-							PLANB_CLR(RUN));
-	tab_cmd_store(c2++, (unsigned)(&pb->planb_base_phys->ch1.control),
-							PLANB_SET(RUN));
-	pb->overlay_last2 = c2;	/* keep a pointer to the last command */
-		/* start over even field clipmasking */
-	tab_cmd_dbdma(c2, DBDMA_NOP | BR_ALWAYS, virt_to_bus(pb->ch2_cmd));
-
-	eieio();
-	return;
-}
-
-/*********************************/
-/* grabdisplay support functions */
-/*********************************/
-
-static int palette2fmt[] = {
-	0,
-	PLANB_GRAY,
-	0,
-	0,
-	0,
-	PLANB_COLOUR32,
-	PLANB_COLOUR15,
-	0,
-	0,
-	0,
-	0,
-	0,
-	0,
-	0,
-	0,
-};
-
-#define PLANB_PALETTE_MAX 15
-
-static int vgrab(struct planb *pb, struct video_mmap *mp)
-{
-	unsigned int fr = mp->frame;
-	unsigned int format;
-
-	if(pb->rawbuf==NULL) {
-		int err;
-		if((err=grabbuf_alloc(pb)))
-			return err;
-	}
-
-	IDEBUG("PlanB: grab %d: %dx%d(%u)\n", pb->grabbing,
-						mp->width, mp->height, fr);
-
-	if(pb->grabbing >= MAX_GBUFFERS)
-		return -ENOBUFS;
-	if(fr > (MAX_GBUFFERS - 1) || fr < 0)
-		return -EINVAL;
-	if(mp->height <= 0 || mp->width <= 0)
-		return -EINVAL;
-	if(mp->format < 0 || mp->format >= PLANB_PALETTE_MAX)
-		return -EINVAL;
-	if((format = palette2fmt[mp->format]) == 0)
-		return -EINVAL;
-	if (mp->height * mp->width * format > PLANB_MAX_FBUF) /* format = bpp */
-		return -EINVAL;
-
-	planb_lock(pb);
-	if(mp->width != pb->gwidth[fr] || mp->height != pb->gheight[fr] ||
-			format != pb->gfmt[fr] || (pb->gnorm_switch[fr])) {
-		int i;
-#ifndef PLANB_GSCANLINE
-		unsigned int osize = pb->gwidth[fr] * pb->gheight[fr]
-								* pb->gfmt[fr];
-		unsigned int nsize = mp->width * mp->height * format;
-#endif
-
-		IDEBUG("PlanB: gwidth = %d, gheight = %d, mp->format = %u\n",
-					mp->width, mp->height, mp->format);
-
-#ifndef PLANB_GSCANLINE
-		if(pb->gnorm_switch[fr])
-			nsize = 0;
-		if (nsize < osize) {
-			for(i = pb->gbuf_idx[fr]; osize > 0; i++) {
-				memset((void *)pb->rawbuf[i], 0, PAGE_SIZE);
-				osize -= PAGE_SIZE;
-			}
-		}
-		for(i = pb->l_fr_addr_idx[fr]; i < pb->l_fr_addr_idx[fr]
-							+ pb->lnum[fr]; i++)
-			memset((void *)pb->rawbuf[i], 0, PAGE_SIZE);
-#else
-/* XXX TODO */
-/*
-		if(pb->gnorm_switch[fr])
-			memset((void *)pb->gbuffer[fr], 0,
-					pb->gbytes_per_line * pb->gheight[fr]);
-		else {
-			if(mp->
-			for(i = 0; i < pb->gheight[fr]; i++) {
-				memset((void *)(pb->gbuffer[fr]
-					+ pb->gbytes_per_line * i
-			}
-		}
-*/
-#endif
-		pb->gwidth[fr] = mp->width;
-		pb->gheight[fr] = mp->height;
-		pb->gfmt[fr] = format;
-		pb->last_cmd[fr] = setup_grab_cmd(fr, pb);
-		planb_pre_capture(fr, pb->gfmt[fr], pb); /* gfmt = bpp */
-		pb->need_pre_capture[fr] = 1;
-		pb->gnorm_switch[fr] = 0;
-	} else
-		pb->need_pre_capture[fr] = 0;
-	pb->frame_stat[fr] = GBUFFER_GRABBING;
-	if(!(ACTIVE & in_le32(&pb->planb_base->ch1.status))) {
-
-		IDEBUG("PlanB: ch1 inactive, initiating grabbing\n");
-
-		planb_dbdma_stop(&pb->planb_base->ch1);
-		if(pb->need_pre_capture[fr]) {
-
-			IDEBUG("PlanB: padding pre-capture sequence\n");
-
-			out_le32 (&pb->planb_base->ch1.cmdptr,
-						virt_to_bus(pb->pre_cmd[fr]));
-		} else {
-			tab_cmd_dbdma(pb->last_cmd[fr], DBDMA_STOP, 0);
-			tab_cmd_dbdma(pb->cap_cmd[fr], DBDMA_NOP, 0);
-		/* let's be on the safe side. here is not timing critical. */
-			tab_cmd_dbdma((pb->cap_cmd[fr] + 1), DBDMA_NOP, 0);
-			out_le32 (&pb->planb_base->ch1.cmdptr,
-						virt_to_bus(pb->cap_cmd[fr]));
-		}
-		planb_dbdma_restart(&pb->planb_base->ch1);
-		pb->last_fr = fr;
-	} else {
-		int i;
-
-		IDEBUG("PlanB: ch1 active, grabbing being queued\n");
-
-		if((pb->last_fr == -1) || ((pb->last_fr == -2) &&
-						overlay_is_active(pb))) {
-
-			IDEBUG("PlanB: overlay is active, grabbing defered\n");
-
-			tab_cmd_dbdma(pb->last_cmd[fr],
-					DBDMA_NOP | BR_ALWAYS,
-					virt_to_bus(pb->ch1_cmd));
-			if(pb->need_pre_capture[fr]) {
-
-				IDEBUG("PlanB: padding pre-capture sequence\n");
-
-				tab_cmd_store(pb->pre_cmd[fr],
-				    virt_to_bus(&pb->overlay_last1->cmd_dep),
-						virt_to_bus(pb->ch1_cmd));
-				eieio();
-				out_le32 (&pb->overlay_last1->cmd_dep,
-						virt_to_bus(pb->pre_cmd[fr]));
-			} else {
-				tab_cmd_store(pb->cap_cmd[fr],
-				    virt_to_bus(&pb->overlay_last1->cmd_dep),
-						virt_to_bus(pb->ch1_cmd));
-				tab_cmd_dbdma((pb->cap_cmd[fr] + 1),
-								DBDMA_NOP, 0);
-				eieio();
-				out_le32 (&pb->overlay_last1->cmd_dep,
-						virt_to_bus(pb->cap_cmd[fr]));
-			}
-			for(i = 0; overlay_is_active(pb) && i < 999; i++)
-				IDEBUG("PlanB: waiting for overlay done\n");
-			tab_cmd_dbdma(pb->ch1_cmd, DBDMA_NOP, 0);
-			pb->prev_last_fr = fr;
-			pb->last_fr = -2;
-		} else if(pb->last_fr == -2) {
-
-			IDEBUG("PlanB: mixed mode detected, grabbing"
-				" will be done before activating overlay\n");
-
-			tab_cmd_dbdma(pb->ch1_cmd, DBDMA_NOP, 0);
-			if(pb->need_pre_capture[fr]) {
-
-				IDEBUG("PlanB: padding pre-capture sequence\n");
-
-				tab_cmd_dbdma(pb->last_cmd[pb->prev_last_fr],
-						DBDMA_NOP | BR_ALWAYS,
-						virt_to_bus(pb->pre_cmd[fr]));
-				eieio();
-			} else {
-				tab_cmd_dbdma(pb->cap_cmd[fr], DBDMA_NOP, 0);
-				if(pb->gwidth[pb->prev_last_fr] !=
-								pb->gwidth[fr]
-					|| pb->gheight[pb->prev_last_fr] !=
-								pb->gheight[fr]
-					|| pb->gfmt[pb->prev_last_fr] !=
-								pb->gfmt[fr])
-					tab_cmd_dbdma((pb->cap_cmd[fr] + 1),
-								DBDMA_NOP, 0);
-				else
-					tab_cmd_dbdma((pb->cap_cmd[fr] + 1),
-					    DBDMA_NOP | BR_ALWAYS,
-					    virt_to_bus(pb->cap_cmd[fr] + 16));
-				tab_cmd_dbdma(pb->last_cmd[pb->prev_last_fr],
-						DBDMA_NOP | BR_ALWAYS,
-						virt_to_bus(pb->cap_cmd[fr]));
-				eieio();
-			}
-			tab_cmd_dbdma(pb->last_cmd[fr],
-					DBDMA_NOP | BR_ALWAYS,
-					virt_to_bus(pb->ch1_cmd));
-			eieio();
-			pb->prev_last_fr = fr;
-			pb->last_fr = -2;
-		} else {
-
-			IDEBUG("PlanB: active grabbing session detected\n");
-
-			if(pb->need_pre_capture[fr]) {
-
-				IDEBUG("PlanB: padding pre-capture sequence\n");
-
-				tab_cmd_dbdma(pb->last_cmd[pb->last_fr],
-						DBDMA_NOP | BR_ALWAYS,
-						virt_to_bus(pb->pre_cmd[fr]));
-				eieio();
-			} else {
-				tab_cmd_dbdma(pb->last_cmd[fr], DBDMA_STOP, 0);
-				tab_cmd_dbdma(pb->cap_cmd[fr], DBDMA_NOP, 0);
-				if(pb->gwidth[pb->last_fr] != pb->gwidth[fr]
-					|| pb->gheight[pb->last_fr] !=
-								pb->gheight[fr]
-					|| pb->gfmt[pb->last_fr] !=
-								pb->gfmt[fr])
-					tab_cmd_dbdma((pb->cap_cmd[fr] + 1),
-								DBDMA_NOP, 0);
-				else
-					tab_cmd_dbdma((pb->cap_cmd[fr] + 1),
-					    DBDMA_NOP | BR_ALWAYS,
-					    virt_to_bus(pb->cap_cmd[fr] + 16));
-				tab_cmd_dbdma(pb->last_cmd[pb->last_fr],
-						DBDMA_NOP | BR_ALWAYS,
-						virt_to_bus(pb->cap_cmd[fr]));
-				eieio();
-			}
-			pb->last_fr = fr;
-		}
-		if(!(ACTIVE & in_le32(&pb->planb_base->ch1.status))) {
-
-			IDEBUG("PlanB: became inactive in the mean time..."
-				"reactivating\n");
-
-			planb_dbdma_stop(&pb->planb_base->ch1);
-			out_le32 (&pb->planb_base->ch1.cmdptr,
-						virt_to_bus(pb->cap_cmd[fr]));
-			planb_dbdma_restart(&pb->planb_base->ch1);
-		}
-	}
-	pb->grabbing++;
-	planb_unlock(pb);
-
-	return 0;
-}
-
-static void planb_pre_capture(int fr, int bpp, struct planb *pb)
-{
-	volatile struct dbdma_cmd *c1 = pb->pre_cmd[fr];
-	int interlace = (pb->gheight[fr] > pb->maxlines/2)? 1: 0;
-
-	tab_cmd_dbdma(c1++, DBDMA_NOP, 0);
-	if((c1 = cmd_geo_setup(c1, pb->gwidth[fr], pb->gheight[fr], interlace,
-						bpp, 0, pb)) == NULL) {
-		printk(KERN_WARNING "PlanB: encountered some problems\n");
-		tab_cmd_dbdma(pb->pre_cmd[fr] + 1, DBDMA_STOP, 0);
-		return;
-	}
-	/* Sync to even field */
-	tab_cmd_store(c1++, (unsigned)(&pb->planb_base_phys->ch1.wait_sel),
-		PLANB_SET(FIELD_SYNC));
-	tab_cmd_dbdma(c1++, DBDMA_NOP | WAIT_IFCLR, 0);
-	tab_cmd_store(c1++, (unsigned)(&pb->planb_base_phys->ch1.br_sel),
-		PLANB_SET(ODD_FIELD));
-	tab_cmd_dbdma(c1++, DBDMA_NOP | WAIT_IFSET, 0);
-	tab_cmd_dbdma(c1, DBDMA_NOP | BR_IFSET, virt_to_bus(c1-3)); c1++;
-	tab_cmd_dbdma(c1++, DBDMA_NOP | INTR_ALWAYS, 0);
-	tab_cmd_store(c1++, (unsigned)(&pb->planb_base_phys->ch1.br_sel),
-		PLANB_SET(DMA_ABORT));
-	/* For non-interlaced, we use even fields only */
-	if (pb->gheight[fr] <= pb->maxlines/2)
-		goto cmd_tab_data_end;
-	/* Sync to odd field */
-	tab_cmd_dbdma(c1++, DBDMA_NOP | WAIT_IFCLR, 0);
-	tab_cmd_store(c1++, (unsigned)(&pb->planb_base_phys->ch1.br_sel),
-		PLANB_SET(ODD_FIELD));
-	tab_cmd_dbdma(c1++, DBDMA_NOP | WAIT_IFSET, 0);
-	tab_cmd_dbdma(c1, DBDMA_NOP | BR_IFCLR, virt_to_bus(c1-3)); c1++;
-	tab_cmd_store(c1++, (unsigned)(&pb->planb_base_phys->ch1.br_sel),
-		PLANB_SET(DMA_ABORT));
-cmd_tab_data_end:
-	tab_cmd_dbdma(c1, DBDMA_NOP | BR_ALWAYS, virt_to_bus(pb->cap_cmd[fr]));
-
-	eieio();
-}
-
-static volatile struct dbdma_cmd *setup_grab_cmd(int fr, struct planb *pb)
-{
-	int		i, bpp, count, nlines, stepsize, interlace;
-#ifdef PLANB_GSCANLINE
-	int		scanline;
-#else
-	int		nlpp, leftover1;
-	unsigned long	base;
-#endif
-	unsigned long	jump;
-	int		pagei;
-	volatile struct dbdma_cmd *c1;
-	volatile struct dbdma_cmd *jump_addr;
-
-	c1 = pb->cap_cmd[fr];
-	interlace = (pb->gheight[fr] > pb->maxlines/2)? 1: 0;
-	bpp = pb->gfmt[fr];	/* gfmt = bpp */
-	count = bpp * pb->gwidth[fr];
-	nlines = pb->gheight[fr];
-#ifdef PLANB_GSCANLINE
-	scanline = pb->gbytes_per_line;
-#else
-	pb->lsize[fr] = count;
-	pb->lnum[fr] = 0;
-#endif
-
-	/* Do video in: */
-
-	/* Preamble commands: */
-	tab_cmd_dbdma(c1++, DBDMA_NOP, 0);
-	tab_cmd_dbdma(c1, DBDMA_NOP | BR_ALWAYS, virt_to_bus(c1 + 16)); c1++;
-	if((c1 = cmd_geo_setup(c1, pb->gwidth[fr], pb->gheight[fr], interlace,
-						bpp, 0, pb)) == NULL) {
-		printk(KERN_WARNING "PlanB: encountered serious problems\n");
-		tab_cmd_dbdma(pb->cap_cmd[fr] + 1, DBDMA_STOP, 0);
-		return (pb->cap_cmd[fr] + 2);
-	}
-	tab_cmd_store(c1++, (unsigned)(&pb->planb_base_phys->ch1.wait_sel),
-		PLANB_SET(FIELD_SYNC));
-	tab_cmd_dbdma(c1++, DBDMA_NOP | WAIT_IFCLR, 0);
-	tab_cmd_store(c1++, (unsigned)(&pb->planb_base_phys->ch1.br_sel),
-		PLANB_SET(ODD_FIELD));
-	tab_cmd_dbdma(c1++, DBDMA_NOP | WAIT_IFSET, 0);
-	tab_cmd_dbdma(c1, DBDMA_NOP | BR_IFSET, virt_to_bus(c1-3)); c1++;
-	tab_cmd_dbdma(c1++, DBDMA_NOP | INTR_ALWAYS, 0);
-	tab_cmd_store(c1++, (unsigned)(&pb->planb_base_phys->ch1.br_sel),
-		PLANB_SET(DMA_ABORT));
-
-	if (interlace) {
-		stepsize = 2;
-		jump_addr = c1 + TAB_FACTOR * (nlines + 1) / 2;
-	} else {
-		stepsize = 1;
-		jump_addr = c1 + TAB_FACTOR * nlines;
-	}
-	jump = virt_to_bus(jump_addr);
-
-	/* even field data: */
-
-	pagei = pb->gbuf_idx[fr];
-#ifdef PLANB_GSCANLINE
-	for (i = 0; i < nlines; i += stepsize) {
-		tab_cmd_gen(c1++, INPUT_MORE | BR_IFSET, count,
-					virt_to_bus(pb->rawbuf[pagei
-					+ i * scanline / PAGE_SIZE]), jump);
-	}
-#else
-	i = 0;
-	leftover1 = 0;
-	do {
-	    int j;
-
-	    base = virt_to_bus(pb->rawbuf[pagei]);
-	    nlpp = (PAGE_SIZE - leftover1) / count / stepsize;
-	    for(j = 0; j < nlpp && i < nlines; j++, i += stepsize, c1++)
-		tab_cmd_gen(c1, INPUT_MORE | KEY_STREAM0 | BR_IFSET,
-			  count, base + count * j * stepsize + leftover1, jump);
-	    if(i < nlines) {
-		int lov0 = PAGE_SIZE - count * nlpp * stepsize - leftover1;
-
-		if(lov0 == 0)
-		    leftover1 = 0;
-		else {
-		    if(lov0 >= count) {
-			tab_cmd_gen(c1++, INPUT_MORE | BR_IFSET, count, base
-				+ count * nlpp * stepsize + leftover1, jump);
-		    } else {
-			pb->l_to_addr[fr][pb->lnum[fr]] = pb->rawbuf[pagei]
-					+ count * nlpp * stepsize + leftover1;
-			pb->l_to_next_idx[fr][pb->lnum[fr]] = pagei + 1;
-			pb->l_to_next_size[fr][pb->lnum[fr]] = count - lov0;
-			tab_cmd_gen(c1++, INPUT_MORE | BR_IFSET, count,
-				virt_to_bus(pb->rawbuf[pb->l_fr_addr_idx[fr]
-						+ pb->lnum[fr]]), jump);
-			if(++pb->lnum[fr] > MAX_LNUM)
-				pb->lnum[fr]--;
-		    }
-		    leftover1 = count * stepsize - lov0;
-		    i += stepsize;
-		}
-	    }
-	    pagei++;
-	} while(i < nlines);
-	tab_cmd_dbdma(c1, DBDMA_NOP | BR_ALWAYS, jump);
-	c1 = jump_addr;
-#endif /* PLANB_GSCANLINE */
-
-	/* For non-interlaced, we use even fields only */
-	if (!interlace)
-		goto cmd_tab_data_end;
-
-	/* Sync to odd field */
-	tab_cmd_dbdma(c1++, DBDMA_NOP | WAIT_IFCLR, 0);
-	tab_cmd_store(c1++, (unsigned)(&pb->planb_base_phys->ch1.br_sel),
-		PLANB_SET(ODD_FIELD));
-	tab_cmd_dbdma(c1++, DBDMA_NOP | WAIT_IFSET, 0);
-	tab_cmd_dbdma(c1, DBDMA_NOP | BR_IFCLR, virt_to_bus(c1-3)); c1++;
-	tab_cmd_store(c1++, (unsigned)(&pb->planb_base_phys->ch1.br_sel),
-		PLANB_SET(DMA_ABORT));
-
-	/* odd field data: */
-	jump_addr = c1 + TAB_FACTOR * nlines / 2;
-	jump = virt_to_bus(jump_addr);
-#ifdef PLANB_GSCANLINE
-	for (i = 1; i < nlines; i += stepsize) {
-		tab_cmd_gen(c1++, INPUT_MORE | BR_IFSET, count,
-					virt_to_bus(pb->rawbuf[pagei
-					+ i * scanline / PAGE_SIZE]), jump);
-	}
-#else
-	i = 1;
-	leftover1 = 0;
-	pagei = pb->gbuf_idx[fr];
-	if(nlines <= 1)
-	    goto skip;
-	do {
-	    int j;
-
-	    base = virt_to_bus(pb->rawbuf[pagei]);
-	    nlpp = (PAGE_SIZE - leftover1) / count / stepsize;
-	    if(leftover1 >= count) {
-		tab_cmd_gen(c1++, INPUT_MORE | KEY_STREAM0 | BR_IFSET, count,
-						base + leftover1 - count, jump);
-		i += stepsize;
-	    }
-	    for(j = 0; j < nlpp && i < nlines; j++, i += stepsize, c1++)
-		tab_cmd_gen(c1, INPUT_MORE | KEY_STREAM0 | BR_IFSET, count,
-			base + count * (j * stepsize + 1) + leftover1, jump);
-	    if(i < nlines) {
-		int lov0 = PAGE_SIZE - count * nlpp * stepsize - leftover1;
-
-		if(lov0 == 0)
-		    leftover1 = 0;
-		else {
-		    if(lov0 > count) {
-			pb->l_to_addr[fr][pb->lnum[fr]] = pb->rawbuf[pagei]
-				+ count * (nlpp * stepsize + 1) + leftover1;
-			pb->l_to_next_idx[fr][pb->lnum[fr]] = pagei + 1;
-			pb->l_to_next_size[fr][pb->lnum[fr]] = count * stepsize
-									- lov0;
-			tab_cmd_gen(c1++, INPUT_MORE | BR_IFSET, count,
-				virt_to_bus(pb->rawbuf[pb->l_fr_addr_idx[fr]
-							+ pb->lnum[fr]]), jump);
-			if(++pb->lnum[fr] > MAX_LNUM)
-				pb->lnum[fr]--;
-			i += stepsize;
-		    }
-		    leftover1 = count * stepsize - lov0;
-		}
-	    }
-	    pagei++;
-	} while(i < nlines);
-skip:
-	tab_cmd_dbdma(c1, DBDMA_NOP | BR_ALWAYS, jump);
-	c1 = jump_addr;
-#endif /* PLANB_GSCANLINE */
-
-cmd_tab_data_end:
-	tab_cmd_store(c1++, (unsigned)(&pb->planb_base_phys->intr_stat),
-			(fr << 9) | PLANB_FRM_IRQ | PLANB_GEN_IRQ);
-	/* stop it */
-	tab_cmd_dbdma(c1, DBDMA_STOP, 0);
-
-	eieio();
-	return c1;
-}
-
-static irqreturn_t planb_irq(int irq, void *dev_id)
-{
-	unsigned int stat, astat;
-	struct planb *pb = (struct planb *)dev_id;
-
-	IDEBUG("PlanB: planb_irq()\n");
-
-	/* get/clear interrupt status bits */
-	eieio();
-	stat = in_le32(&pb->planb_base->intr_stat);
-	astat = stat & pb->intr_mask;
-	out_le32(&pb->planb_base->intr_stat, PLANB_FRM_IRQ
-					& ~astat & stat & ~PLANB_GEN_IRQ);
-	IDEBUG("PlanB: stat = %X, astat = %X\n", stat, astat);
-
-	if(astat & PLANB_FRM_IRQ) {
-		unsigned int fr = stat >> 9;
-#ifndef PLANB_GSCANLINE
-		int i;
-#endif
-		IDEBUG("PlanB: PLANB_FRM_IRQ\n");
-
-		pb->gcount++;
-
-		IDEBUG("PlanB: grab %d: fr = %d, gcount = %d\n",
-				pb->grabbing, fr, pb->gcount);
-#ifndef PLANB_GSCANLINE
-		IDEBUG("PlanB: %d * %d bytes are being copied over\n",
-				pb->lnum[fr], pb->lsize[fr]);
-		for(i = 0; i < pb->lnum[fr]; i++) {
-			int first = pb->lsize[fr] - pb->l_to_next_size[fr][i];
-
-			memcpy(pb->l_to_addr[fr][i],
-				pb->rawbuf[pb->l_fr_addr_idx[fr] + i],
-				first);
-			memcpy(pb->rawbuf[pb->l_to_next_idx[fr][i]],
-				pb->rawbuf[pb->l_fr_addr_idx[fr] + i] + first,
-						pb->l_to_next_size[fr][i]);
-		}
-#endif
-		pb->frame_stat[fr] = GBUFFER_DONE;
-		pb->grabbing--;
-		wake_up_interruptible(&pb->capq);
-		return IRQ_HANDLED;
-	}
-	/* incorrect interrupts? */
-	pb->intr_mask = PLANB_CLR_IRQ;
-	out_le32(&pb->planb_base->intr_stat, PLANB_CLR_IRQ);
-	printk(KERN_ERR "PlanB: IRQ lockup, cleared intrrupts"
-							" unconditionally\n");
-	return IRQ_HANDLED;
-}
-
-/*******************************
- * Device Operations functions *
- *******************************/
-
-static int planb_open(struct video_device *dev, int mode)
-{
-	struct planb *pb = (struct planb *)dev;
-
-	if (pb->user == 0) {
-		int err;
-		if((err = planb_prepare_open(pb)) != 0)
-			return err;
-	}
-	pb->user++;
-
-	DEBUG("PlanB: device opened\n");
-	return 0;
-}
-
-static void planb_close(struct video_device *dev)
-{
-	struct planb *pb = (struct planb *)dev;
-
-	if(pb->user < 1) /* ??? */
-		return;
-	planb_lock(pb);
-	if (pb->user == 1) {
-		if (pb->overlay) {
-			planb_dbdma_stop(&pb->planb_base->ch2);
-			planb_dbdma_stop(&pb->planb_base->ch1);
-			pb->overlay = 0;
-		}
-		planb_prepare_close(pb);
-	}
-	pb->user--;
-	planb_unlock(pb);
-
-	DEBUG("PlanB: device closed\n");
-}
-
-static long planb_read(struct video_device *v, char *buf, unsigned long count,
-				int nonblock)
-{
-	DEBUG("planb: read request\n");
-	return -EINVAL;
-}
-
-static long planb_write(struct video_device *v, const char *buf,
-				unsigned long count, int nonblock)
-{
-	DEBUG("planb: write request\n");
-	return -EINVAL;
-}
-
-static int planb_ioctl(struct video_device *dev, unsigned int cmd, void *arg)
-{
-	struct planb *pb=(struct planb *)dev;
-
-	switch (cmd)
-	{
-		case VIDIOCGCAP:
-		{
-			struct video_capability b;
-
-			DEBUG("PlanB: IOCTL VIDIOCGCAP\n");
-
-			strcpy (b.name, pb->video_dev.name);
-			b.type = VID_TYPE_OVERLAY | VID_TYPE_CLIPPING |
-				 VID_TYPE_FRAMERAM | VID_TYPE_SCALES |
-				 VID_TYPE_CAPTURE;
-			b.channels = 2;	/* composite & svhs */
-			b.audios = 0;
-			b.maxwidth = PLANB_MAXPIXELS;
-			b.maxheight = PLANB_MAXLINES;
-			b.minwidth = 32; /* wild guess */
-			b.minheight = 32;
-			if (copy_to_user(arg,&b,sizeof(b)))
-				return -EFAULT;
-			return 0;
-		}
-		case VIDIOCSFBUF:
-		{
-			struct video_buffer v;
-			unsigned short bpp;
-			unsigned int fmt;
-
-			DEBUG("PlanB: IOCTL VIDIOCSFBUF\n");
-
-			if (!capable(CAP_SYS_ADMIN)
-			|| !capable(CAP_SYS_RAWIO))
-				return -EPERM;
-			if (copy_from_user(&v, arg,sizeof(v)))
-				return -EFAULT;
-			planb_lock(pb);
-			switch(v.depth) {
-			case 8:
-				bpp = 1;
-				fmt = PLANB_GRAY;
-				break;
-			case 15:
-			case 16:
-				bpp = 2;
-				fmt = PLANB_COLOUR15;
-				break;
-			case 24:
-			case 32:
-				bpp = 4;
-				fmt = PLANB_COLOUR32;
-				break;
-			default:
-				planb_unlock(pb);
-				return -EINVAL;
-			}
-			if (bpp * v.width > v.bytesperline) {
-				planb_unlock(pb);
-				return -EINVAL;
-			}
-			pb->win.bpp = bpp;
-			pb->win.color_fmt = fmt;
-			pb->frame_buffer_phys = (unsigned long) v.base;
-			pb->win.sheight = v.height;
-			pb->win.swidth = v.width;
-			pb->picture.depth = pb->win.depth = v.depth;
-			pb->win.bpl = pb->win.bpp * pb->win.swidth;
-			pb->win.pad = v.bytesperline - pb->win.bpl;
-
-			DEBUG("PlanB: Display at %p is %d by %d, bytedepth %d,"
-				" bpl %d (+ %d)\n", v.base, v.width,v.height,
-				pb->win.bpp, pb->win.bpl, pb->win.pad);
-
-			pb->cmd_buff_inited = 0;
-			if(pb->overlay) {
-				suspend_overlay(pb);
-				fill_cmd_buff(pb);
-				resume_overlay(pb);
-			}
-			planb_unlock(pb);
-			return 0;
-		}
-		case VIDIOCGFBUF:
-		{
-			struct video_buffer v;
-
-			DEBUG("PlanB: IOCTL VIDIOCGFBUF\n");
-
-			v.base = (void *)pb->frame_buffer_phys;
-			v.height = pb->win.sheight;
-			v.width = pb->win.swidth;
-			v.depth = pb->win.depth;
-			v.bytesperline = pb->win.bpl + pb->win.pad;
-			if (copy_to_user(arg, &v, sizeof(v)))
-				return -EFAULT;
-			return 0;
-		}
-		case VIDIOCCAPTURE:
-		{
-			int i;
-
-			if(copy_from_user(&i, arg, sizeof(i)))
-				return -EFAULT;
-			if(i==0) {
-				DEBUG("PlanB: IOCTL VIDIOCCAPTURE Stop\n");
-
-				if (!(pb->overlay))
-					return 0;
-				planb_lock(pb);
-				pb->overlay = 0;
-				overlay_stop(pb);
-				planb_unlock(pb);
-			} else {
-				DEBUG("PlanB: IOCTL VIDIOCCAPTURE Start\n");
-
-				if (pb->frame_buffer_phys == 0 ||
-					  pb->win.width == 0 ||
-					  pb->win.height == 0)
-					return -EINVAL;
-				if (pb->overlay)
-					return 0;
-				planb_lock(pb);
-				pb->overlay = 1;
-				if(!(pb->cmd_buff_inited))
-					fill_cmd_buff(pb);
-				overlay_start(pb);
-				planb_unlock(pb);
-			}
-			return 0;
-		}
-		case VIDIOCGCHAN:
-		{
-			struct video_channel v;
-
-			DEBUG("PlanB: IOCTL VIDIOCGCHAN\n");
-
-			if(copy_from_user(&v, arg,sizeof(v)))
-				return -EFAULT;
-			v.flags = 0;
-			v.tuners = 0;
-			v.type = VIDEO_TYPE_CAMERA;
-			v.norm = pb->win.norm;
-			switch(v.channel)
-			{
-			case 0:
-				strcpy(v.name,"Composite");
-				break;
-			case 1:
-				strcpy(v.name,"SVHS");
-				break;
-			default:
-				return -EINVAL;
-				break;
-			}
-			if(copy_to_user(arg,&v,sizeof(v)))
-				return -EFAULT;
-
-			return 0;
-		}
-		case VIDIOCSCHAN:
-		{
-			struct video_channel v;
-
-			DEBUG("PlanB: IOCTL VIDIOCSCHAN\n");
-
-			if(copy_from_user(&v, arg, sizeof(v)))
-				return -EFAULT;
-
-			if (v.norm != pb->win.norm) {
-				int i, maxlines;
-
-				switch (v.norm)
-				{
-				case VIDEO_MODE_PAL:
-				case VIDEO_MODE_SECAM:
-					maxlines = PLANB_MAXLINES;
-					break;
-				case VIDEO_MODE_NTSC:
-					maxlines = PLANB_NTSC_MAXLINES;
-					break;
-				default:
-					return -EINVAL;
-					break;
-				}
-				planb_lock(pb);
-				/* empty the grabbing queue */
-				wait_event(pb->capq, !pb->grabbing);
-				pb->maxlines = maxlines;
-				pb->win.norm = v.norm;
-				/* Stop overlay if running */
-				suspend_overlay(pb);
-				for(i = 0; i < MAX_GBUFFERS; i++)
-					pb->gnorm_switch[i] = 1;
-				/* I know it's an overkill, but.... */
-				fill_cmd_buff(pb);
-				/* ok, now init it accordingly */
-				saa_init_regs (pb);
-				/* restart overlay if it was running */
-				resume_overlay(pb);
-				planb_unlock(pb);
-			}
-
-			switch(v.channel)
-			{
-			case 0:	/* Composite	*/
-				saa_set (SAA7196_IOCC,
-					((saa_regs[pb->win.norm][SAA7196_IOCC] &
-					  ~7) | 3), pb);
-				break;
-			case 1:	/* SVHS		*/
-				saa_set (SAA7196_IOCC,
-					((saa_regs[pb->win.norm][SAA7196_IOCC] &
-					  ~7) | 4), pb);
-				break;
-			default:
-				return -EINVAL;
-				break;
-			}
-
-			return 0;
-		}
-		case VIDIOCGPICT:
-		{
-			struct video_picture vp = pb->picture;
-
-			DEBUG("PlanB: IOCTL VIDIOCGPICT\n");
-
-			switch(pb->win.color_fmt) {
-			case PLANB_GRAY:
-				vp.palette = VIDEO_PALETTE_GREY;
-			case PLANB_COLOUR15:
-				vp.palette = VIDEO_PALETTE_RGB555;
-				break;
-			case PLANB_COLOUR32:
-				vp.palette = VIDEO_PALETTE_RGB32;
-				break;
-			default:
-				vp.palette = 0;
-				break;
-			}
-
-			if(copy_to_user(arg,&vp,sizeof(vp)))
-				return -EFAULT;
-			return 0;
-		}
-		case VIDIOCSPICT:
-		{
-			struct video_picture vp;
-
-			DEBUG("PlanB: IOCTL VIDIOCSPICT\n");
-
-			if(copy_from_user(&vp,arg,sizeof(vp)))
-				return -EFAULT;
-			pb->picture = vp;
-			/* Should we do sanity checks here? */
-			saa_set (SAA7196_BRIG, (unsigned char)
-			    ((pb->picture.brightness) >> 8), pb);
-			saa_set (SAA7196_HUEC, (unsigned char)
-			    ((pb->picture.hue) >> 8) ^ 0x80, pb);
-			saa_set (SAA7196_CSAT, (unsigned char)
-			    ((pb->picture.colour) >> 9), pb);
-			saa_set (SAA7196_CONT, (unsigned char)
-			    ((pb->picture.contrast) >> 9), pb);
-
-			return 0;
-		}
-		case VIDIOCSWIN:
-		{
-			struct video_window	vw;
-			struct video_clip	clip;
-			int 			i;
-
-			DEBUG("PlanB: IOCTL VIDIOCSWIN\n");
-
-			if(copy_from_user(&vw,arg,sizeof(vw)))
-				return -EFAULT;
-
-			planb_lock(pb);
-			/* Stop overlay if running */
-			suspend_overlay(pb);
-			pb->win.interlace = (vw.height > pb->maxlines/2)? 1: 0;
-			if (pb->win.x != vw.x ||
-			    pb->win.y != vw.y ||
-			    pb->win.width != vw.width ||
-			    pb->win.height != vw.height ||
-			    !pb->cmd_buff_inited) {
-				pb->win.x = vw.x;
-				pb->win.y = vw.y;
-				pb->win.width = vw.width;
-				pb->win.height = vw.height;
-				fill_cmd_buff(pb);
-			}
-			/* Reset clip mask */
-			memset ((void *) pb->mask, 0xff, (pb->maxlines
-					* ((PLANB_MAXPIXELS + 7) & ~7)) / 8);
-			/* Add any clip rects */
-			for (i = 0; i < vw.clipcount; i++) {
-				if (copy_from_user(&clip, vw.clips + i,
-						sizeof(struct video_clip)))
-					return -EFAULT;
-				add_clip(pb, &clip);
-			}
-			/* restart overlay if it was running */
-			resume_overlay(pb);
-			planb_unlock(pb);
-			return 0;
-		}
-		case VIDIOCGWIN:
-		{
-			struct video_window vw;
-
-			DEBUG("PlanB: IOCTL VIDIOCGWIN\n");
-
-			vw.x=pb->win.x;
-			vw.y=pb->win.y;
-			vw.width=pb->win.width;
-			vw.height=pb->win.height;
-			vw.chromakey=0;
-			vw.flags=0;
-			if(pb->win.interlace)
-				vw.flags|=VIDEO_WINDOW_INTERLACE;
-			if(copy_to_user(arg,&vw,sizeof(vw)))
-				return -EFAULT;
-			return 0;
-		}
-		case VIDIOCSYNC: {
-			int i;
-
-			IDEBUG("PlanB: IOCTL VIDIOCSYNC\n");
-
-			if(copy_from_user((void *)&i,arg,sizeof(int)))
-				return -EFAULT;
-
-			IDEBUG("PlanB: sync to frame %d\n", i);
-
-			if(i > (MAX_GBUFFERS - 1) || i < 0)
-				return -EINVAL;
-chk_grab:
-			switch (pb->frame_stat[i]) {
-			case GBUFFER_UNUSED:
-				return -EINVAL;
-			case GBUFFER_GRABBING:
-				IDEBUG("PlanB: waiting for grab"
-							" done (%d)\n", i);
-				interruptible_sleep_on(&pb->capq);
-				if(signal_pending(current))
-					return -EINTR;
-				goto chk_grab;
-			case GBUFFER_DONE:
-				pb->frame_stat[i] = GBUFFER_UNUSED;
-				break;
-			}
-			return 0;
-		}
-
-		case VIDIOCMCAPTURE:
-		{
-			struct video_mmap vm;
-			volatile unsigned int status;
-
-			IDEBUG("PlanB: IOCTL VIDIOCMCAPTURE\n");
-
-			if(copy_from_user((void *) &vm,(void *)arg,sizeof(vm)))
-				return -EFAULT;
-			status = pb->frame_stat[vm.frame];
-			if (status != GBUFFER_UNUSED)
-				return -EBUSY;
-
-			return vgrab(pb, &vm);
-		}
-
-		case VIDIOCGMBUF:
-		{
-			int i;
-			struct video_mbuf vm;
-
-			DEBUG("PlanB: IOCTL VIDIOCGMBUF\n");
-
-			memset(&vm, 0 , sizeof(vm));
-			vm.size = PLANB_MAX_FBUF * MAX_GBUFFERS;
-			vm.frames = MAX_GBUFFERS;
-			for(i = 0; i<MAX_GBUFFERS; i++)
-				vm.offsets[i] = PLANB_MAX_FBUF * i;
-			if(copy_to_user((void *)arg, (void *)&vm, sizeof(vm)))
-				return -EFAULT;
-			return 0;
-		}
-
-		case PLANBIOCGSAAREGS:
-		{
-			struct planb_saa_regs preg;
-
-			DEBUG("PlanB: IOCTL PLANBIOCGSAAREGS\n");
-
-			if(copy_from_user(&preg, arg, sizeof(preg)))
-				return -EFAULT;
-			if(preg.addr >= SAA7196_NUMREGS)
-				return -EINVAL;
-			preg.val = saa_regs[pb->win.norm][preg.addr];
-			if(copy_to_user((void *)arg, (void *)&preg,
-								sizeof(preg)))
-				return -EFAULT;
-			return 0;
-		}
-
-		case PLANBIOCSSAAREGS:
-		{
-			struct planb_saa_regs preg;
-
-			DEBUG("PlanB: IOCTL PLANBIOCSSAAREGS\n");
-
-			if(copy_from_user(&preg, arg, sizeof(preg)))
-				return -EFAULT;
-			if(preg.addr >= SAA7196_NUMREGS)
-				return -EINVAL;
-			saa_set (preg.addr, preg.val, pb);
-			return 0;
-		}
-
-		case PLANBIOCGSTAT:
-		{
-			struct planb_stat_regs pstat;
-
-			DEBUG("PlanB: IOCTL PLANBIOCGSTAT\n");
-
-			pstat.ch1_stat = in_le32(&pb->planb_base->ch1.status);
-			pstat.ch2_stat = in_le32(&pb->planb_base->ch2.status);
-			pstat.saa_stat0 = saa_status(0, pb);
-			pstat.saa_stat1 = saa_status(1, pb);
-
-			if(copy_to_user((void *)arg, (void *)&pstat,
-							sizeof(pstat)))
-				return -EFAULT;
-			return 0;
-		}
-
-		case PLANBIOCSMODE: {
-			int v;
-
-			DEBUG("PlanB: IOCTL PLANBIOCSMODE\n");
-
-			if(copy_from_user(&v, arg, sizeof(v)))
-				return -EFAULT;
-
-			switch(v)
-			{
-			case PLANB_TV_MODE:
-				saa_set (SAA7196_STDC,
-					(saa_regs[pb->win.norm][SAA7196_STDC] &
-					  0x7f), pb);
-				break;
-			case PLANB_VTR_MODE:
-				saa_set (SAA7196_STDC,
-					(saa_regs[pb->win.norm][SAA7196_STDC] |
-					  0x80), pb);
-				break;
-			default:
-				return -EINVAL;
-				break;
-			}
-			pb->win.mode = v;
-			return 0;
-		}
-		case PLANBIOCGMODE: {
-			int v=pb->win.mode;
-
-			DEBUG("PlanB: IOCTL PLANBIOCGMODE\n");
-
-			if(copy_to_user(arg,&v,sizeof(v)))
-				return -EFAULT;
-			return 0;
-		}
-#ifdef PLANB_GSCANLINE
-		case PLANBG_GRAB_BPL: {
-			int v=pb->gbytes_per_line;
-
-			DEBUG("PlanB: IOCTL PLANBG_GRAB_BPL\n");
-
-			if(copy_to_user(arg,&v,sizeof(v)))
-				return -EFAULT;
-			return 0;
-		}
-#endif /* PLANB_GSCANLINE */
-		case PLANB_INTR_DEBUG: {
-			int i;
-
-			DEBUG("PlanB: IOCTL PLANB_INTR_DEBUG\n");
-
-			if(copy_from_user(&i, arg, sizeof(i)))
-				return -EFAULT;
-
-			/* avoid hang ups all together */
-			for (i = 0; i < MAX_GBUFFERS; i++) {
-				if(pb->frame_stat[i] == GBUFFER_GRABBING) {
-					pb->frame_stat[i] = GBUFFER_DONE;
-				}
-			}
-			if(pb->grabbing)
-				pb->grabbing--;
-			wake_up_interruptible(&pb->capq);
-			return 0;
-		}
-		case PLANB_INV_REGS: {
-			int i;
-			struct planb_any_regs any;
-
-			DEBUG("PlanB: IOCTL PLANB_INV_REGS\n");
-
-			if(copy_from_user(&any, arg, sizeof(any)))
-				return -EFAULT;
-			if(any.offset < 0 || any.offset + any.bytes > 0x400)
-				return -EINVAL;
-			if(any.bytes > 128)
-				return -EINVAL;
-			for (i = 0; i < any.bytes; i++) {
-				any.data[i] =
-					in_8((unsigned char *)pb->planb_base
-							+ any.offset + i);
-			}
-			if(copy_to_user(arg,&any,sizeof(any)))
-				return -EFAULT;
-			return 0;
-		}
-		default:
-		{
-			DEBUG("PlanB: Unimplemented IOCTL\n");
-			return -ENOIOCTLCMD;
-		}
-	/* Some IOCTLs are currently unsupported on PlanB */
-		case VIDIOCGTUNER: {
-		DEBUG("PlanB: IOCTL VIDIOCGTUNER\n");
-			goto unimplemented; }
-		case VIDIOCSTUNER: {
-		DEBUG("PlanB: IOCTL VIDIOCSTUNER\n");
-			goto unimplemented; }
-		case VIDIOCSFREQ: {
-		DEBUG("PlanB: IOCTL VIDIOCSFREQ\n");
-			goto unimplemented; }
-		case VIDIOCGFREQ: {
-		DEBUG("PlanB: IOCTL VIDIOCGFREQ\n");
-			goto unimplemented; }
-		case VIDIOCKEY: {
-		DEBUG("PlanB: IOCTL VIDIOCKEY\n");
-			goto unimplemented; }
-		case VIDIOCSAUDIO: {
-		DEBUG("PlanB: IOCTL VIDIOCSAUDIO\n");
-			goto unimplemented; }
-		case VIDIOCGAUDIO: {
-		DEBUG("PlanB: IOCTL VIDIOCGAUDIO\n");
-			goto unimplemented; }
-unimplemented:
-		DEBUG("       Unimplemented\n");
-			return -ENOIOCTLCMD;
-	}
-	return 0;
-}
-
-static int planb_mmap(struct vm_area_struct *vma, struct video_device *dev, const char *adr, unsigned long size)
-{
-	int i;
-	struct planb *pb = (struct planb *)dev;
-	unsigned long start = (unsigned long)adr;
-
-	if (size > MAX_GBUFFERS * PLANB_MAX_FBUF)
-		return -EINVAL;
-	if (!pb->rawbuf) {
-		int err;
-		if((err=grabbuf_alloc(pb)))
-			return err;
-	}
-	for (i = 0; i < pb->rawbuf_size; i++) {
-		unsigned long pfn;
-
-		pfn = virt_to_phys((void *)pb->rawbuf[i]) >> PAGE_SHIFT;
-		if (remap_pfn_range(vma, start, pfn, PAGE_SIZE, PAGE_SHARED))
-			return -EAGAIN;
-		start += PAGE_SIZE;
-		if (size <= PAGE_SIZE)
-			break;
-		size -= PAGE_SIZE;
-	}
-	return 0;
-}
-
-static struct video_device planb_template=
-{
-	.owner		= THIS_MODULE,
-	.name		= PLANB_DEVICE_NAME,
-	.type		= VID_TYPE_OVERLAY,
-	.open		= planb_open,
-	.close		= planb_close,
-	.read		= planb_read,
-	.write		= planb_write,
-	.ioctl		= planb_ioctl,
-	.mmap		= planb_mmap,	/* mmap? */
-};
-
-static int init_planb(struct planb *pb)
-{
-	unsigned char saa_rev;
-	int i, result;
-
-	memset ((void *) &pb->win, 0, sizeof (struct planb_window));
-	/* Simple sanity check */
-	if(def_norm >= NUM_SUPPORTED_NORM || def_norm < 0) {
-		printk(KERN_ERR "PlanB: Option(s) invalid\n");
-		return -2;
-	}
-	pb->win.norm = def_norm;
-	pb->win.mode = PLANB_TV_MODE;	/* TV mode */
-	pb->win.interlace=1;
-	pb->win.x=0;
-	pb->win.y=0;
-	pb->win.width=768; /* 640 */
-	pb->win.height=576; /* 480 */
-	pb->maxlines=576;
-#if 0
-	btv->win.cropwidth=768; /* 640 */
-	btv->win.cropheight=576; /* 480 */
-	btv->win.cropx=0;
-	btv->win.cropy=0;
-#endif
-	pb->win.pad=0;
-	pb->win.bpp=4;
-	pb->win.depth=32;
-	pb->win.color_fmt=PLANB_COLOUR32;
-	pb->win.bpl=1024*pb->win.bpp;
-	pb->win.swidth=1024;
-	pb->win.sheight=768;
-#ifdef PLANB_GSCANLINE
-	if((pb->gbytes_per_line = PLANB_MAXPIXELS * 4) > PAGE_SIZE
-				|| (pb->gbytes_per_line <= 0))
-		return -3;
-	else {
-		/* page align pb->gbytes_per_line for DMA purpose */
-		for(i = PAGE_SIZE; pb->gbytes_per_line < (i>>1);)
-			i>>=1;
-		pb->gbytes_per_line = i;
-	}
-#endif
-	pb->tab_size = PLANB_MAXLINES + 40;
-	pb->suspend = 0;
-	mutex_init(&pb->lock);
-	pb->ch1_cmd = 0;
-	pb->ch2_cmd = 0;
-	pb->mask = 0;
-	pb->priv_space = 0;
-	pb->offset = 0;
-	pb->user = 0;
-	pb->overlay = 0;
-	init_waitqueue_head(&pb->suspendq);
-	pb->cmd_buff_inited = 0;
-	pb->frame_buffer_phys = 0;
-
-	/* Reset DMA controllers */
-	planb_dbdma_stop(&pb->planb_base->ch2);
-	planb_dbdma_stop(&pb->planb_base->ch1);
-
-	saa_rev =  (saa_status(0, pb) & 0xf0) >> 4;
-	printk(KERN_INFO "PlanB: SAA7196 video processor rev. %d\n", saa_rev);
-	/* Initialize the SAA registers in memory and on chip */
-	saa_init_regs (pb);
-
-	/* clear interrupt mask */
-	pb->intr_mask = PLANB_CLR_IRQ;
-
-	result = request_irq(pb->irq, planb_irq, 0, "PlanB", pb);
-	if (result < 0) {
-		if (result==-EINVAL)
-			printk(KERN_ERR "PlanB: Bad irq number (%d) "
-						"or handler\n", (int)pb->irq);
-		else if (result==-EBUSY)
-			printk(KERN_ERR "PlanB: I don't know why, "
-					"but IRQ %d is busy\n", (int)pb->irq);
-		return result;
-	}
-	disable_irq(pb->irq);
-
-	/* Now add the template and register the device unit. */
-	memcpy(&pb->video_dev,&planb_template,sizeof(planb_template));
-
-	pb->picture.brightness=0x90<<8;
-	pb->picture.contrast = 0x70 << 8;
-	pb->picture.colour = 0x70<<8;
-	pb->picture.hue = 0x8000;
-	pb->picture.whiteness = 0;
-	pb->picture.depth = pb->win.depth;
-
-	pb->frame_stat=NULL;
-	init_waitqueue_head(&pb->capq);
-	for(i=0; i<MAX_GBUFFERS; i++) {
-		pb->gbuf_idx[i] = PLANB_MAX_FBUF * i / PAGE_SIZE;
-		pb->gwidth[i]=0;
-		pb->gheight[i]=0;
-		pb->gfmt[i]=0;
-		pb->cap_cmd[i]=NULL;
-#ifndef PLANB_GSCANLINE
-		pb->l_fr_addr_idx[i] = MAX_GBUFFERS * (PLANB_MAX_FBUF
-						/ PAGE_SIZE + 1) + MAX_LNUM * i;
-		pb->lsize[i] = 0;
-		pb->lnum[i] = 0;
-#endif
-	}
-	pb->rawbuf=NULL;
-	pb->grabbing=0;
-
-	/* enable interrupts */
-	out_le32(&pb->planb_base->intr_stat, PLANB_CLR_IRQ);
-	pb->intr_mask = PLANB_FRM_IRQ;
-	enable_irq(pb->irq);
-
-	if(video_register_device(&pb->video_dev, VFL_TYPE_GRABBER, video_nr)<0)
-		return -1;
-
-	return 0;
-}
-
-/*
- *	Scan for a PlanB controller, request the irq and map the io memory
- */
-
-static int find_planb(void)
-{
-	struct planb		*pb;
-	struct device_node	*planb_devices;
-	unsigned char		dev_fn, confreg, bus;
-	unsigned int		old_base, new_base;
-	unsigned int		irq;
-	struct pci_dev 		*pdev;
-	int rc;
-
-	if (!machine_is(powermac))
-		return 0;
-
-	planb_devices = of_find_node_by_name(NULL, "planb");
-	if (planb_devices == 0) {
-		planb_num=0;
-		printk(KERN_WARNING "PlanB: no device found!\n");
-		return planb_num;
-	}
-
-	if (planb_devices->next != NULL)
-		printk(KERN_ERR "Warning: only using first PlanB device!\n");
-	pb = &planbs[0];
-	planb_num = 1;
-
-	if (planb_devices->n_addrs != 1) {
-		printk (KERN_WARNING "PlanB: expecting 1 address for planb "
-			"(got %d)", planb_devices->n_addrs);
-		of_node_put(planb_devices);
-		return 0;
-	}
-
-	if (planb_devices->n_intrs == 0) {
-		printk(KERN_WARNING "PlanB: no intrs for device %s\n",
-		       planb_devices->full_name);
-		of_node_put(planb_devices);
-		return 0;
-	} else {
-		irq = planb_devices->intrs[0].line;
-	}
-
-	/* Initialize PlanB's PCI registers */
-
-	/* There is a bug with the way OF assigns addresses
-	   to the devices behind the chaos bridge.
-	   control needs only 0x1000 of space, but decodes only
-	   the upper 16 bits. It therefore occupies a full 64K.
-	   OF assigns the planb controller memory within this space;
-	   so we need to change that here in order to access planb. */
-
-	/* We remap to 0xf1000000 in hope that nobody uses it ! */
-
-	bus = (planb_devices->addrs[0].space >> 16) & 0xff;
-	dev_fn = (planb_devices->addrs[0].space >> 8) & 0xff;
-	confreg = planb_devices->addrs[0].space & 0xff;
-	old_base = planb_devices->addrs[0].address;
-	new_base = 0xf1000000;
-	of_node_put(planb_devices);
-
-	DEBUG("PlanB: Found on bus %d, dev %d, func %d, "
-		"membase 0x%x (base reg. 0x%x)\n",
-		bus, PCI_SLOT(dev_fn), PCI_FUNC(dev_fn), old_base, confreg);
-
-	pdev = pci_get_bus_and_slot(bus, dev_fn);
-	if (!pdev) {
-		printk(KERN_ERR "planb: cannot find slot\n");
-		goto err_out;
-	}
-
-	/* Enable response in memory space, bus mastering,
-	   use memory write and invalidate */
-	rc = pci_enable_device(pdev);
-	if (rc) {
-		printk(KERN_ERR "planb: cannot enable PCI device %s\n",
-		       pci_name(pdev));
-		goto err_out;
-	}
-	rc = pci_set_mwi(pdev);
-	if (rc) {
-		printk(KERN_ERR "planb: cannot enable MWI on PCI device %s\n",
-		       pci_name(pdev));
-		goto err_out_disable;
-	}
-	pci_set_master(pdev);
-
-	/* Set the new base address */
-	pci_write_config_dword (pdev, confreg, new_base);
-
-	planb_regs = (volatile struct planb_registers *)
-						ioremap (new_base, 0x400);
-	pb->planb_base = planb_regs;
-	pb->planb_base_phys = (struct planb_registers *)new_base;
-	pb->irq	= irq;
-	pb->dev = pdev;
-
-	return planb_num;
-
-err_out_disable:
-	pci_disable_device(pdev);
-err_out:
-	/* FIXME handle error */   /* comment moved from pci_find_slot, above */
-	pci_dev_put(pdev);
-	return 0;
-}
-
-static void release_planb(void)
-{
-	int i;
-	struct planb *pb;
-
-	for (i=0;i<planb_num; i++)
-	{
-		pb=&planbs[i];
-
-		/* stop and flash DMAs unconditionally */
-		planb_dbdma_stop(&pb->planb_base->ch2);
-		planb_dbdma_stop(&pb->planb_base->ch1);
-
-		/* clear and free interrupts */
-		pb->intr_mask = PLANB_CLR_IRQ;
-		out_le32 (&pb->planb_base->intr_stat, PLANB_CLR_IRQ);
-		free_irq(pb->irq, pb);
-
-		/* make sure all allocated memory are freed */
-		planb_prepare_close(pb);
-
-		printk(KERN_INFO "PlanB: unregistering with v4l\n");
-		video_unregister_device(&pb->video_dev);
-
-		pci_dev_put(pb->dev);
-
-		/* note that iounmap() does nothing on the PPC right now */
-		iounmap ((void *)pb->planb_base);
-	}
-}
-
-static int __init init_planbs(void)
-{
-	int i;
-
-	if (find_planb()<=0)
-		return -EIO;
-
-	for (i=0; i<planb_num; i++) {
-		if (init_planb(&planbs[i])<0) {
-			printk(KERN_ERR "PlanB: error registering device %d"
-							" with v4l\n", i);
-			release_planb();
-			return -EIO;
-		}
-		printk(KERN_INFO "PlanB: registered device %d with v4l\n", i);
-	}
-	return 0;
-}
-
-static void __exit exit_planbs(void)
-{
-	release_planb();
-}
-
-module_init(init_planbs);
-module_exit(exit_planbs);
diff --git a/drivers/media/video/planb.h b/drivers/media/video/planb.h
deleted file mode 100644
index e21b5735c103..000000000000
--- a/drivers/media/video/planb.h
+++ /dev/null
@@ -1,232 +0,0 @@
-/*
-    planb - PlanB frame grabber driver
-
-    PlanB is used in the 7x00/8x00 series of PowerMacintosh
-    Computers as video input DMA controller.
-
-    Copyright (C) 1998 Michel Lanners (mlan@cpu.lu)
-
-    Based largely on the bttv driver by Ralph Metzler (rjkm@thp.uni-koeln.de)
-
-    Additional debugging and coding by Takashi Oe (toe@unlserve.unl.edu)
-
-
-    This program is free software; you can redistribute it and/or modify
-    it under the terms of the GNU General Public License as published by
-    the Free Software Foundation; either version 2 of the License, or
-    (at your option) any later version.
-
-    This program is distributed in the hope that it will be useful,
-    but WITHOUT ANY WARRANTY; without even the implied warranty of
-    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-    GNU General Public License for more details.
-
-    You should have received a copy of the GNU General Public License
-    along with this program; if not, write to the Free Software
-    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-*/
-
-/* $Id: planb.h,v 1.13 1999/05/03 19:28:56 mlan Exp $ */
-
-#ifndef _PLANB_H_
-#define _PLANB_H_
-
-#ifdef __KERNEL__
-#include <asm/dbdma.h>
-#include "saa7196.h"
-#endif /* __KERNEL__ */
-
-#define PLANB_DEVICE_NAME	"Apple PlanB Video-In"
-#define PLANB_REV		"1.0"
-
-#ifdef __KERNEL__
-//#define PLANB_GSCANLINE	/* use this if apps have the notion of */
-				/* grab buffer scanline */
-/* This should be safe for both PAL and NTSC */
-#define PLANB_MAXPIXELS 768
-#define PLANB_MAXLINES 576
-#define PLANB_NTSC_MAXLINES 480
-
-/* Uncomment your preferred norm ;-) */
-#define PLANB_DEF_NORM VIDEO_MODE_PAL
-//#define PLANB_DEF_NORM VIDEO_MODE_NTSC
-//#define PLANB_DEF_NORM VIDEO_MODE_SECAM
-
-/* fields settings */
-#define PLANB_GRAY	0x1	/*  8-bit mono? */
-#define PLANB_COLOUR15	0x2	/* 16-bit mode */
-#define PLANB_COLOUR32	0x4	/* 32-bit mode */
-#define PLANB_CLIPMASK	0x8	/* hardware clipmasking */
-
-/* misc. flags for PlanB DMA operation */
-#define	CH_SYNC		0x1	/* synchronize channels (set by ch1;
-				   cleared by ch2) */
-#define FIELD_SYNC	0x2     /* used for the start of each field
-				   (0 -> 1 -> 0 for ch1; 0 -> 1 for ch2) */
-#define EVEN_FIELD	0x0	/* even field is detected if unset */
-#define DMA_ABORT	0x2	/* error or just out of sync if set */
-#define ODD_FIELD	0x4	/* odd field is detected if set */
-
-/* for capture operations */
-#define MAX_GBUFFERS	2
-/* note PLANB_MAX_FBUF must be divisible by PAGE_SIZE */
-#ifdef PLANB_GSCANLINE
-#define PLANB_MAX_FBUF	0x240000	/* 576 * 1024 * 4 */
-#define TAB_FACTOR	(1)
-#else
-#define PLANB_MAX_FBUF	0x1b0000	/* 576 * 768 * 4 */
-#define TAB_FACTOR	(2)
-#endif
-#endif /* __KERNEL__ */
-
-struct planb_saa_regs {
-	unsigned char addr;
-	unsigned char val;
-};
-
-struct planb_stat_regs {
-	unsigned int ch1_stat;
-	unsigned int ch2_stat;
-	unsigned char saa_stat0;
-	unsigned char saa_stat1;
-};
-
-struct planb_any_regs {
-	unsigned int offset;
-	unsigned int bytes;
-	unsigned char data[128];
-};
-
-/* planb private ioctls */
-#define PLANBIOCGSAAREGS	_IOWR('v', BASE_VIDIOCPRIVATE, struct planb_saa_regs)	/* Read a saa7196 reg value */
-#define PLANBIOCSSAAREGS	_IOW('v', BASE_VIDIOCPRIVATE + 1, struct planb_saa_regs)	/* Set a saa7196 reg value */
-#define PLANBIOCGSTAT		_IOR('v', BASE_VIDIOCPRIVATE + 2, struct planb_stat_regs)	/* Read planb status */
-#define PLANB_TV_MODE		1
-#define PLANB_VTR_MODE		2
-#define PLANBIOCGMODE		_IOR('v', BASE_VIDIOCPRIVATE + 3, int)	/* Get TV/VTR mode */
-#define PLANBIOCSMODE		_IOW('v', BASE_VIDIOCPRIVATE + 4, int)	/* Set TV/VTR mode */
-
-#ifdef PLANB_GSCANLINE
-#define PLANBG_GRAB_BPL		_IOR('v', BASE_VIDIOCPRIVATE + 5, int)	/* # of bytes per scanline in grab buffer */
-#endif
-
-/* call wake_up_interruptible() with appropriate actions */
-#define PLANB_INTR_DEBUG	_IOW('v', BASE_VIDIOCPRIVATE + 20, int)
-/* investigate which reg does what */
-#define PLANB_INV_REGS		_IOWR('v', BASE_VIDIOCPRIVATE + 21, struct planb_any_regs)
-
-#ifdef __KERNEL__
-
-/* Potentially useful macros */
-#define PLANB_SET(x)	((x) << 16 | (x))
-#define PLANB_CLR(x)	((x) << 16)
-
-/* This represents the physical register layout */
-struct planb_registers {
-	volatile struct dbdma_regs	ch1;		/* 0x00: video in */
-	volatile unsigned int		even;		/* 0x40: even field setting */
-	volatile unsigned int		odd;		/* 0x44; odd field setting */
-	unsigned int			pad1[14];	/* empty? */
-	volatile struct dbdma_regs	ch2;		/* 0x80: clipmask out */
-	unsigned int			pad2[16];	/* 0xc0: empty? */
-	volatile unsigned int		reg3;		/* 0x100: ???? */
-	volatile unsigned int		intr_stat;	/* 0x104: irq status */
-#define PLANB_CLR_IRQ		0x00		/* clear Plan B interrupt */
-#define PLANB_GEN_IRQ		0x01		/* assert Plan B interrupt */
-#define PLANB_FRM_IRQ		0x0100		/* end of frame */
-	unsigned int			pad3[1];	/* empty? */
-	volatile unsigned int		reg5;		/* 0x10c: ??? */
-	unsigned int			pad4[60];	/* empty? */
-	volatile unsigned char		saa_addr;	/* 0x200: SAA subadr */
-	char				pad5[3];
-	volatile unsigned char		saa_regval;	/* SAA7196 write reg. val */
-	char				pad6[3];
-	volatile unsigned char		saa_status;	/* SAA7196 status byte */
-	/* There is more unused stuff here */
-};
-
-struct planb_window {
-	int	x, y;
-	ushort	width, height;
-	ushort	bpp, bpl, depth, pad;
-	ushort	swidth, sheight;
-	int	norm;
-	int	interlace;
-	u32	color_fmt;
-	int	chromakey;
-	int	mode;		/* used to switch between TV/VTR modes */
-};
-
-struct planb_suspend {
-	int overlay;
-	int frame;
-	struct dbdma_cmd cmd;
-};
-
-struct planb {
-	struct	video_device video_dev;
-	struct	video_picture picture;		/* Current picture params */
-	struct	video_audio audio_dev;		/* Current audio params */
-
-	volatile struct planb_registers *planb_base;	/* virt base of planb */
-	struct planb_registers *planb_base_phys;	/* phys base of planb */
-	void	*priv_space;			/* Org. alloc. mem for kfree */
-	int	user;
-	unsigned int tab_size;
-	int     maxlines;
-	struct mutex lock;
-	unsigned int	irq;			/* interrupt number */
-	volatile unsigned int intr_mask;
-	struct pci_dev *dev;			/* Our PCI device */
-
-	int	overlay;			/* overlay running? */
-	struct	planb_window win;
-	unsigned long frame_buffer_phys;	/* We need phys for DMA */
-	int	offset;				/* offset of pixel 1 */
-	volatile struct dbdma_cmd *ch1_cmd;	/* Video In DMA cmd buffer */
-	volatile struct dbdma_cmd *ch2_cmd;	/* Clip Out DMA cmd buffer */
-	volatile struct dbdma_cmd *overlay_last1;
-	volatile struct dbdma_cmd *overlay_last2;
-	unsigned long ch1_cmd_phys;
-	volatile unsigned char *mask;		/* Clipmask buffer */
-	int suspend;
-	wait_queue_head_t suspendq;
-	struct planb_suspend suspended;
-	int	cmd_buff_inited;		/* cmd buffer inited? */
-
-	int grabbing;
-	unsigned int gcount;
-	wait_queue_head_t capq;
-	int last_fr;
-	int prev_last_fr;
-	unsigned char **rawbuf;
-	int rawbuf_size;
-	int gbuf_idx[MAX_GBUFFERS];
-	volatile struct dbdma_cmd *cap_cmd[MAX_GBUFFERS];
-	volatile struct dbdma_cmd *last_cmd[MAX_GBUFFERS];
-	volatile struct dbdma_cmd *pre_cmd[MAX_GBUFFERS];
-	int need_pre_capture[MAX_GBUFFERS];
-#define PLANB_DUMMY 40	/* # of command buf's allocated for pre-capture seq. */
-	int gwidth[MAX_GBUFFERS], gheight[MAX_GBUFFERS];
-	unsigned int gfmt[MAX_GBUFFERS];
-	int gnorm_switch[MAX_GBUFFERS];
-	volatile unsigned int *frame_stat;
-#define GBUFFER_UNUSED       0x00U
-#define GBUFFER_GRABBING     0x01U
-#define GBUFFER_DONE         0x02U
-#ifdef PLANB_GSCANLINE
-	int gbytes_per_line;
-#else
-#define MAX_LNUM 431	/* change this if PLANB_MAXLINES or */
-			/* PLANB_MAXPIXELS changes */
-	int l_fr_addr_idx[MAX_GBUFFERS];
-	unsigned char *l_to_addr[MAX_GBUFFERS][MAX_LNUM];
-	int l_to_next_idx[MAX_GBUFFERS][MAX_LNUM];
-	int l_to_next_size[MAX_GBUFFERS][MAX_LNUM];
-	int lsize[MAX_GBUFFERS], lnum[MAX_GBUFFERS];
-#endif
-};
-
-#endif /* __KERNEL__ */
-
-#endif /* _PLANB_H_ */
diff --git a/drivers/media/video/pms.c b/drivers/media/video/pms.c
index 51b1461d8fb6..00425d743656 100644
--- a/drivers/media/video/pms.c
+++ b/drivers/media/video/pms.c
@@ -30,6 +30,7 @@
 #include <asm/io.h>
 #include <linux/videodev.h>
 #include <media/v4l2-common.h>
+#include <media/v4l2-ioctl.h>
 #include <linux/mutex.h>
 
 #include <asm/uaccess.h>
@@ -894,9 +895,7 @@ static const struct file_operations pms_fops = {
 
 static struct video_device pms_template=
 {
-	.owner		= THIS_MODULE,
 	.name		= "Mediavision PMS",
-	.type		= VID_TYPE_CAPTURE,
 	.fops           = &pms_fops,
 };
 
diff --git a/drivers/media/video/pvrusb2/Kconfig b/drivers/media/video/pvrusb2/Kconfig
index 4482b2c72ced..19eb274c9cd0 100644
--- a/drivers/media/video/pvrusb2/Kconfig
+++ b/drivers/media/video/pvrusb2/Kconfig
@@ -2,8 +2,6 @@ config VIDEO_PVRUSB2
 	tristate "Hauppauge WinTV-PVR USB2 support"
 	depends on VIDEO_V4L2 && I2C
 	depends on VIDEO_MEDIA	# Avoids pvrusb = Y / DVB = M
-	depends on HOTPLUG	# due to FW_LOADER
-	select FW_LOADER
 	select VIDEO_TUNER
 	select VIDEO_TVEEPROM
 	select VIDEO_CX2341X
diff --git a/drivers/media/video/pvrusb2/pvrusb2-context.h b/drivers/media/video/pvrusb2/pvrusb2-context.h
index 61801291c2af..d657e53bbfa3 100644
--- a/drivers/media/video/pvrusb2/pvrusb2-context.h
+++ b/drivers/media/video/pvrusb2/pvrusb2-context.h
@@ -16,8 +16,8 @@
  *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  *
  */
-#ifndef __PVRUSB2_BASE_H
-#define __PVRUSB2_BASE_H
+#ifndef __PVRUSB2_CONTEXT_H
+#define __PVRUSB2_CONTEXT_H
 
 #include <linux/mutex.h>
 #include <linux/usb.h>
diff --git a/drivers/media/video/pvrusb2/pvrusb2-devattr.c b/drivers/media/video/pvrusb2/pvrusb2-devattr.c
index 5d036e7e3f07..88e175168438 100644
--- a/drivers/media/video/pvrusb2/pvrusb2-devattr.c
+++ b/drivers/media/video/pvrusb2/pvrusb2-devattr.c
@@ -97,13 +97,13 @@ static const struct pvr2_device_desc pvr2_device_24xxx = {
 		.flag_has_cx25840 = !0,
 		.flag_has_wm8775 = !0,
 		.flag_has_hauppauge_rom = !0,
-		.flag_has_hauppauge_custom_ir = !0,
 		.flag_has_analogtuner = !0,
 		.flag_has_fmradio = !0,
 		.flag_has_composite = !0,
 		.flag_has_svideo = !0,
 		.signal_routing_scheme = PVR2_ROUTING_SCHEME_HAUPPAUGE,
 		.led_scheme = PVR2_LED_SCHEME_HAUPPAUGE,
+		.ir_scheme = PVR2_IR_SCHEME_24XXX,
 };
 
 
@@ -330,7 +330,7 @@ static const char *pvr2_fw1_names_73xxx[] = {
 };
 
 static const struct pvr2_device_desc pvr2_device_73xxx = {
-		.description = "WinTV PVR USB2 Model Category 73xxx",
+		.description = "WinTV HVR-1900 Model Category 73xxx",
 		.shortname = "73xxx",
 		.client_modules.lst = pvr2_client_73xxx,
 		.client_modules.cnt = ARRAY_SIZE(pvr2_client_73xxx),
@@ -344,6 +344,7 @@ static const struct pvr2_device_desc pvr2_device_73xxx = {
 		.signal_routing_scheme = PVR2_ROUTING_SCHEME_HAUPPAUGE,
 		.digital_control_scheme = PVR2_DIGITAL_SCHEME_HAUPPAUGE,
 		.led_scheme = PVR2_LED_SCHEME_HAUPPAUGE,
+		.ir_scheme = PVR2_IR_SCHEME_ZILOG,
 #ifdef CONFIG_VIDEO_PVRUSB2_DVB
 		.dvb_props = &pvr2_73xxx_dvb_props,
 #endif
@@ -438,7 +439,7 @@ static const char *pvr2_fw1_names_75xxx[] = {
 };
 
 static const struct pvr2_device_desc pvr2_device_750xx = {
-		.description = "WinTV PVR USB2 Model Category 750xx",
+		.description = "WinTV HVR-1950 Model Category 750xx",
 		.shortname = "750xx",
 		.client_modules.lst = pvr2_client_75xxx,
 		.client_modules.cnt = ARRAY_SIZE(pvr2_client_75xxx),
@@ -453,13 +454,14 @@ static const struct pvr2_device_desc pvr2_device_750xx = {
 		.digital_control_scheme = PVR2_DIGITAL_SCHEME_HAUPPAUGE,
 		.default_std_mask = V4L2_STD_NTSC_M,
 		.led_scheme = PVR2_LED_SCHEME_HAUPPAUGE,
+		.ir_scheme = PVR2_IR_SCHEME_ZILOG,
 #ifdef CONFIG_VIDEO_PVRUSB2_DVB
 		.dvb_props = &pvr2_750xx_dvb_props,
 #endif
 };
 
 static const struct pvr2_device_desc pvr2_device_751xx = {
-		.description = "WinTV PVR USB2 Model Category 751xx",
+		.description = "WinTV HVR-1950 Model Category 751xx",
 		.shortname = "751xx",
 		.client_modules.lst = pvr2_client_75xxx,
 		.client_modules.cnt = ARRAY_SIZE(pvr2_client_75xxx),
@@ -474,6 +476,7 @@ static const struct pvr2_device_desc pvr2_device_751xx = {
 		.digital_control_scheme = PVR2_DIGITAL_SCHEME_HAUPPAUGE,
 		.default_std_mask = V4L2_STD_NTSC_M,
 		.led_scheme = PVR2_LED_SCHEME_HAUPPAUGE,
+		.ir_scheme = PVR2_IR_SCHEME_ZILOG,
 #ifdef CONFIG_VIDEO_PVRUSB2_DVB
 		.dvb_props = &pvr2_751xx_dvb_props,
 #endif
diff --git a/drivers/media/video/pvrusb2/pvrusb2-devattr.h b/drivers/media/video/pvrusb2/pvrusb2-devattr.h
index e23ce1d2edd7..cb3a33eb0276 100644
--- a/drivers/media/video/pvrusb2/pvrusb2-devattr.h
+++ b/drivers/media/video/pvrusb2/pvrusb2-devattr.h
@@ -48,6 +48,10 @@ struct pvr2_string_table {
 #define PVR2_LED_SCHEME_NONE 0
 #define PVR2_LED_SCHEME_HAUPPAUGE 1
 
+#define PVR2_IR_SCHEME_NONE 0
+#define PVR2_IR_SCHEME_24XXX 1
+#define PVR2_IR_SCHEME_ZILOG 2
+
 /* This describes a particular hardware type (except for the USB device ID
    which must live in a separate structure due to environmental
    constraints).  See the top of pvrusb2-hdw.c for where this is
@@ -126,15 +130,19 @@ struct pvr2_device_desc {
 	   ensure that it is found. */
 	unsigned int flag_has_wm8775:1;
 
-	/* Device has IR hardware that can be faked into looking like a
-	   normal Hauppauge i2c IR receiver.  This is currently very
-	   specific to the 24xxx device, where Hauppauge had replaced their
-	   'standard' I2C IR receiver with a bunch of FPGA logic controlled
-	   directly via the FX2.  Turning this on tells the pvrusb2 driver
-	   to virtualize the presence of the non-existant IR receiver chip and
-	   implement the virtual receiver in terms of appropriate FX2
-	   commands. */
-	unsigned int flag_has_hauppauge_custom_ir:1;
+	/* Indicate any specialized IR scheme that might need to be
+	   supported by this driver.  If not set, then it is assumed that
+	   IR can work without help from the driver (which is frequently
+	   the case).  This is otherwise set to one of
+	   PVR2_IR_SCHEME_xxxx.  For "xxxx", the value "24XXX" indicates a
+	   Hauppauge 24xxx class device which has an FPGA-hosted IR
+	   receiver that can only be reached via FX2 command codes.  In
+	   that case the pvrusb2 driver will emulate the behavior of the
+	   older 29xxx device's IR receiver (a "virtual" I2C chip) in terms
+	   of those command codes.  For the value "ZILOG", we're dealing
+	   with an IR chip that must be taken out of reset via another FX2
+	   command code (which is the case for HVR-1950 devices). */
+	unsigned int ir_scheme:2;
 
 	/* These bits define which kinds of sources the device can handle.
 	   Note: Digital tuner presence is inferred by the
diff --git a/drivers/media/video/pvrusb2/pvrusb2-fx2-cmd.h b/drivers/media/video/pvrusb2/pvrusb2-fx2-cmd.h
index b58369e7f30b..614755ea2ea3 100644
--- a/drivers/media/video/pvrusb2/pvrusb2-fx2-cmd.h
+++ b/drivers/media/video/pvrusb2/pvrusb2-fx2-cmd.h
@@ -24,6 +24,8 @@
 #define FX2CMD_MEM_WRITE_DWORD  0x01u
 #define FX2CMD_MEM_READ_DWORD   0x02u
 
+#define FX2CMD_HCW_ZILOG_RESET  0x10u /* 1=reset 0=release */
+
 #define FX2CMD_MEM_READ_64BYTES 0x28u
 
 #define FX2CMD_REG_WRITE        0x04u
diff --git a/drivers/media/video/pvrusb2/pvrusb2-hdw.c b/drivers/media/video/pvrusb2/pvrusb2-hdw.c
index a5217a2cf4c0..f051c6aa7f1f 100644
--- a/drivers/media/video/pvrusb2/pvrusb2-hdw.c
+++ b/drivers/media/video/pvrusb2/pvrusb2-hdw.c
@@ -250,6 +250,7 @@ struct pvr2_fx2cmd_descdef {
 static const struct pvr2_fx2cmd_descdef pvr2_fx2cmd_desc[] = {
 	{FX2CMD_MEM_WRITE_DWORD, "write encoder dword"},
 	{FX2CMD_MEM_READ_DWORD, "read encoder dword"},
+	{FX2CMD_HCW_ZILOG_RESET, "zilog IR reset control"},
 	{FX2CMD_MEM_READ_64BYTES, "read encoder 64bytes"},
 	{FX2CMD_REG_WRITE, "write encoder register"},
 	{FX2CMD_REG_READ, "read encoder register"},
@@ -1711,6 +1712,14 @@ static void pvr2_hdw_setup_low(struct pvr2_hdw *hdw)
 		if (!pvr2_hdw_dev_ok(hdw)) return;
 	}
 
+	/* Take the IR chip out of reset, if appropriate */
+	if (hdw->hdw_desc->ir_scheme == PVR2_IR_SCHEME_ZILOG) {
+		pvr2_issue_simple_cmd(hdw,
+				      FX2CMD_HCW_ZILOG_RESET |
+				      (1 << 8) |
+				      ((0) << 16));
+	}
+
 	// This step MUST happen after the earlier powerup step.
 	pvr2_i2c_core_init(hdw);
 	if (!pvr2_hdw_dev_ok(hdw)) return;
diff --git a/drivers/media/video/pvrusb2/pvrusb2-i2c-core.c b/drivers/media/video/pvrusb2/pvrusb2-i2c-core.c
index 9d3c18b24744..e600576a6c4b 100644
--- a/drivers/media/video/pvrusb2/pvrusb2-i2c-core.c
+++ b/drivers/media/video/pvrusb2/pvrusb2-i2c-core.c
@@ -979,7 +979,9 @@ void pvr2_i2c_core_init(struct pvr2_hdw *hdw)
 		printk(KERN_INFO "%s: IR disabled\n",hdw->name);
 		hdw->i2c_func[0x18] = i2c_black_hole;
 	} else if (ir_mode[hdw->unit_number] == 1) {
-		if (hdw->hdw_desc->flag_has_hauppauge_custom_ir) {
+		if (hdw->hdw_desc->ir_scheme == PVR2_IR_SCHEME_24XXX) {
+			/* This comment is present PURELY to get
+			   checkpatch.pl to STFU.  Lovely, eh? */
 			hdw->i2c_func[0x18] = i2c_24xxx_ir;
 		}
 	}
diff --git a/drivers/media/video/pvrusb2/pvrusb2-v4l2.c b/drivers/media/video/pvrusb2/pvrusb2-v4l2.c
index 0d72dc470fef..00306faeac01 100644
--- a/drivers/media/video/pvrusb2/pvrusb2-v4l2.c
+++ b/drivers/media/video/pvrusb2/pvrusb2-v4l2.c
@@ -30,6 +30,7 @@
 #include <linux/videodev2.h>
 #include <media/v4l2-dev.h>
 #include <media/v4l2-common.h>
+#include <media/v4l2-ioctl.h>
 
 struct pvr2_v4l2_dev;
 struct pvr2_v4l2_fh;
@@ -1160,11 +1161,6 @@ static const struct file_operations vdev_fops = {
 
 
 static struct video_device vdev_template = {
-	.owner      = THIS_MODULE,
-	.type       = VID_TYPE_CAPTURE | VID_TYPE_TUNER,
-	.type2      = (V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_VBI_CAPTURE
-		       | V4L2_CAP_TUNER | V4L2_CAP_AUDIO
-		       | V4L2_CAP_READWRITE),
 	.fops       = &vdev_fops,
 };
 
diff --git a/drivers/media/video/pwc/pwc-if.c b/drivers/media/video/pwc/pwc-if.c
index 423fa7c2d0c9..9aee7cb6f79a 100644
--- a/drivers/media/video/pwc/pwc-if.c
+++ b/drivers/media/video/pwc/pwc-if.c
@@ -165,9 +165,7 @@ static const struct file_operations pwc_fops = {
 	.llseek =       no_llseek,
 };
 static struct video_device pwc_template = {
-	.owner =	THIS_MODULE,
 	.name =		"Philips Webcam",	/* Filled in later */
-	.type =		VID_TYPE_CAPTURE,
 	.release =	video_device_release,
 	.fops =         &pwc_fops,
 	.minor =        -1,
@@ -1048,19 +1046,20 @@ static int pwc_create_sysfs_files(struct video_device *vdev)
 	struct pwc_device *pdev = video_get_drvdata(vdev);
 	int rc;
 
-	rc = video_device_create_file(vdev, &dev_attr_button);
+	rc = device_create_file(&vdev->dev, &dev_attr_button);
 	if (rc)
 		goto err;
 	if (pdev->features & FEATURE_MOTOR_PANTILT) {
-		rc = video_device_create_file(vdev, &dev_attr_pan_tilt);
+		rc = device_create_file(&vdev->dev, &dev_attr_pan_tilt);
 		if (rc) goto err_button;
 	}
 
 	return 0;
 
 err_button:
-	video_device_remove_file(vdev, &dev_attr_button);
+	device_remove_file(&vdev->dev, &dev_attr_button);
 err:
+	PWC_ERROR("Could not create sysfs files.\n");
 	return rc;
 }
 
@@ -1068,8 +1067,8 @@ static void pwc_remove_sysfs_files(struct video_device *vdev)
 {
 	struct pwc_device *pdev = video_get_drvdata(vdev);
 	if (pdev->features & FEATURE_MOTOR_PANTILT)
-		video_device_remove_file(vdev, &dev_attr_pan_tilt);
-	video_device_remove_file(vdev, &dev_attr_button);
+		device_remove_file(&vdev->dev, &dev_attr_pan_tilt);
+	device_remove_file(&vdev->dev, &dev_attr_button);
 }
 
 #ifdef CONFIG_USB_PWC_DEBUG
@@ -1767,9 +1766,8 @@ static int usb_pwc_probe(struct usb_interface *intf, const struct usb_device_id
 		return -ENOMEM;
 	}
 	memcpy(pdev->vdev, &pwc_template, sizeof(pwc_template));
-	pdev->vdev->dev = &(udev->dev);
+	pdev->vdev->parent = &(udev->dev);
 	strcpy(pdev->vdev->name, name);
-	pdev->vdev->owner = THIS_MODULE;
 	video_set_drvdata(pdev->vdev, pdev);
 
 	pdev->release = le16_to_cpu(udev->descriptor.bcdDevice);
diff --git a/drivers/media/video/pwc/pwc.h b/drivers/media/video/pwc/pwc.h
index 8e8e5b27e77e..74178754b39b 100644
--- a/drivers/media/video/pwc/pwc.h
+++ b/drivers/media/video/pwc/pwc.h
@@ -32,9 +32,11 @@
 #include <linux/smp_lock.h>
 #include <linux/version.h>
 #include <linux/mutex.h>
+#include <linux/mm.h>
 #include <asm/errno.h>
 #include <linux/videodev.h>
 #include <media/v4l2-common.h>
+#include <media/v4l2-ioctl.h>
 
 #include "pwc-uncompress.h"
 #include <media/pwc-ioctl.h>
diff --git a/drivers/media/video/pxa_camera.c b/drivers/media/video/pxa_camera.c
index b15f82c49766..388cf94055d3 100644
--- a/drivers/media/video/pxa_camera.c
+++ b/drivers/media/video/pxa_camera.c
@@ -36,8 +36,8 @@
 #include <linux/videodev2.h>
 
 #include <asm/dma.h>
-#include <asm/arch/pxa-regs.h>
-#include <asm/arch/camera.h>
+#include <mach/pxa-regs.h>
+#include <mach/camera.h>
 
 #define PXA_CAM_VERSION_CODE KERNEL_VERSION(0, 0, 5)
 #define PXA_CAM_DRV_NAME "pxa27x-camera"
@@ -128,6 +128,8 @@ struct pxa_camera_dev {
 
 	struct pxa_buffer	*active;
 	struct pxa_dma_desc	*sg_tail[3];
+
+	u32			save_cicr[5];
 };
 
 static const char *pxa_cam_driver_description = "PXA_Camera";
@@ -997,10 +999,64 @@ static int pxa_camera_querycap(struct soc_camera_host *ici,
 	return 0;
 }
 
+static int pxa_camera_suspend(struct soc_camera_device *icd, pm_message_t state)
+{
+	struct soc_camera_host *ici =
+		to_soc_camera_host(icd->dev.parent);
+	struct pxa_camera_dev *pcdev = ici->priv;
+	int i = 0, ret = 0;
+
+	pcdev->save_cicr[i++] = CICR0;
+	pcdev->save_cicr[i++] = CICR1;
+	pcdev->save_cicr[i++] = CICR2;
+	pcdev->save_cicr[i++] = CICR3;
+	pcdev->save_cicr[i++] = CICR4;
+
+	if ((pcdev->icd) && (pcdev->icd->ops->suspend))
+		ret = pcdev->icd->ops->suspend(pcdev->icd, state);
+
+	return ret;
+}
+
+static int pxa_camera_resume(struct soc_camera_device *icd)
+{
+	struct soc_camera_host *ici =
+		to_soc_camera_host(icd->dev.parent);
+	struct pxa_camera_dev *pcdev = ici->priv;
+	int i = 0, ret = 0;
+
+	DRCMR68 = pcdev->dma_chans[0] | DRCMR_MAPVLD;
+	DRCMR69 = pcdev->dma_chans[1] | DRCMR_MAPVLD;
+	DRCMR70 = pcdev->dma_chans[2] | DRCMR_MAPVLD;
+
+	CICR0 = pcdev->save_cicr[i++] & ~CICR0_ENB;
+	CICR1 = pcdev->save_cicr[i++];
+	CICR2 = pcdev->save_cicr[i++];
+	CICR3 = pcdev->save_cicr[i++];
+	CICR4 = pcdev->save_cicr[i++];
+
+	if ((pcdev->icd) && (pcdev->icd->ops->resume))
+		ret = pcdev->icd->ops->resume(pcdev->icd);
+
+	/* Restart frame capture if active buffer exists */
+	if (!ret && pcdev->active) {
+		/* Reset the FIFOs */
+		CIFR |= CIFR_RESET_F;
+		/* Enable End-Of-Frame Interrupt */
+		CICR0 &= ~CICR0_EOFM;
+		/* Restart the Capture Interface */
+		CICR0 |= CICR0_ENB;
+	}
+
+	return ret;
+}
+
 static struct soc_camera_host_ops pxa_soc_camera_host_ops = {
 	.owner		= THIS_MODULE,
 	.add		= pxa_camera_add_device,
 	.remove		= pxa_camera_remove_device,
+	.suspend	= pxa_camera_suspend,
+	.resume		= pxa_camera_resume,
 	.set_fmt_cap	= pxa_camera_set_fmt_cap,
 	.try_fmt_cap	= pxa_camera_try_fmt_cap,
 	.init_videobuf	= pxa_camera_init_videobuf,
@@ -1198,7 +1254,7 @@ static int __devinit pxa_camera_init(void)
 
 static void __exit pxa_camera_exit(void)
 {
-	return platform_driver_unregister(&pxa_camera_driver);
+	platform_driver_unregister(&pxa_camera_driver);
 }
 
 module_init(pxa_camera_init);
diff --git a/drivers/media/video/s2255drv.c b/drivers/media/video/s2255drv.c
index 04eb2c3fabd8..b1d09d8e2b85 100644
--- a/drivers/media/video/s2255drv.c
+++ b/drivers/media/video/s2255drv.c
@@ -47,8 +47,10 @@
 #include <linux/mutex.h>
 #include <linux/videodev2.h>
 #include <linux/version.h>
+#include <linux/mm.h>
 #include <media/videobuf-vmalloc.h>
 #include <media/v4l2-common.h>
+#include <media/v4l2-ioctl.h>
 #include <linux/vmalloc.h>
 #include <linux/usb.h>
 
@@ -184,6 +186,7 @@ struct s2255_dmaqueue {
 #define S2255_FW_LOADED_DSPWAIT	1
 #define S2255_FW_SUCCESS	2
 #define S2255_FW_FAILED		3
+#define S2255_FW_DISCONNECTING  4
 
 struct s2255_fw {
 	int		      fw_loaded;
@@ -263,7 +266,6 @@ struct s2255_buffer {
 
 struct s2255_fh {
 	struct s2255_dev	*dev;
-	unsigned int		resources;
 	const struct s2255_fmt	*fmt;
 	unsigned int		width;
 	unsigned int		height;
@@ -273,14 +275,9 @@ struct s2255_fh {
 	/* mode below is the desired mode.
 	   mode in s2255_dev is the current mode that was last set */
 	struct s2255_mode	mode;
+	int			resources[MAX_CHANNELS];
 };
 
-/*
- * TODO: fixme S2255_MAX_USERS. Do not limit open driver handles.
- * Limit V4L to one stream at a time.
- */
-#define S2255_MAX_USERS         1
-
 #define CUR_USB_FWVER	774	/* current cypress EEPROM firmware version */
 #define S2255_MAJOR_VERSION	1
 #define S2255_MINOR_VERSION	13
@@ -476,10 +473,9 @@ static void s2255_timer(unsigned long user_data)
 	dprintk(100, "s2255 timer\n");
 	if (usb_submit_urb(data->fw_urb, GFP_ATOMIC) < 0) {
 		printk(KERN_ERR "s2255: can't submit urb\n");
-		if (data->fw) {
-			release_firmware(data->fw);
-			data->fw = NULL;
-		}
+		atomic_set(&data->fw_state, S2255_FW_FAILED);
+		/* wake up anything waiting for the firmware */
+		wake_up(&data->wait_fw);
 		return;
 	}
 }
@@ -509,13 +505,18 @@ static void s2255_fwchunk_complete(struct urb *urb)
 	struct usb_device *udev = urb->dev;
 	int len;
 	dprintk(100, "udev %p urb %p", udev, urb);
-	/* TODO: fixme.  reflect change in status */
 	if (urb->status) {
 		dev_err(&udev->dev, "URB failed with status %d", urb->status);
+		atomic_set(&data->fw_state, S2255_FW_FAILED);
+		/* wake up anything waiting for the firmware */
+		wake_up(&data->wait_fw);
 		return;
 	}
 	if (data->fw_urb == NULL) {
-		dev_err(&udev->dev, "early disconncect\n");
+		dev_err(&udev->dev, "s2255 disconnected\n");
+		atomic_set(&data->fw_state, S2255_FW_FAILED);
+		/* wake up anything waiting for the firmware */
+		wake_up(&data->wait_fw);
 		return;
 	}
 #define CHUNK_SIZE 512
@@ -789,7 +790,8 @@ static int res_get(struct s2255_dev *dev, struct s2255_fh *fh)
 	}
 	/* it's free, grab it */
 	dev->resources[fh->channel] = 1;
-	dprintk(1, "res: get\n");
+	fh->resources[fh->channel] = 1;
+	dprintk(1, "s2255: res: get\n");
 	mutex_unlock(&dev->lock);
 	return 1;
 }
@@ -799,9 +801,18 @@ static int res_locked(struct s2255_dev *dev, struct s2255_fh *fh)
 	return dev->resources[fh->channel];
 }
 
+static int res_check(struct s2255_fh *fh)
+{
+	return fh->resources[fh->channel];
+}
+
+
 static void res_free(struct s2255_dev *dev, struct s2255_fh *fh)
 {
+	mutex_lock(&dev->lock);
 	dev->resources[fh->channel] = 0;
+	fh->resources[fh->channel] = 0;
+	mutex_unlock(&dev->lock);
 	dprintk(1, "res: put\n");
 }
 
@@ -1232,7 +1243,7 @@ static int vidioc_streamon(struct file *file, void *priv, enum v4l2_buf_type i)
 	}
 
 	if (!res_get(dev, fh)) {
-		dev_err(&dev->udev->dev, "res get busy\n");
+		dev_err(&dev->udev->dev, "s2255: stream busy\n");
 		return -EBUSY;
 	}
 
@@ -1288,8 +1299,10 @@ static int vidioc_streamoff(struct file *file, void *priv, enum v4l2_buf_type i)
 	}
 	s2255_stop_acquire(dev, fh->channel);
 	res = videobuf_streamoff(&fh->vb_vidq);
+	if (res < 0)
+		return res;
 	res_free(dev, fh);
-	return res;
+	return 0;
 }
 
 static int vidioc_s_std(struct file *file, void *priv, v4l2_std_id *i)
@@ -1462,12 +1475,7 @@ static int s2255_open(struct inode *inode, struct file *file)
 	mutex_lock(&dev->open_lock);
 
 	dev->users[cur_channel]++;
-	if (dev->users[cur_channel] > S2255_MAX_USERS) {
-		dev->users[cur_channel]--;
-		mutex_unlock(&dev->open_lock);
-		printk(KERN_INFO "s2255drv: too many open handles!\n");
-		return -EBUSY;
-	}
+	dprintk(4, "s2255: open_handles %d\n", dev->users[cur_channel]);
 
 	if (atomic_read(&dev->fw_data->fw_state) == S2255_FW_FAILED) {
 		err("2255 firmware load failed. retrying.\n");
@@ -1478,7 +1486,8 @@ static int s2255_open(struct inode *inode, struct file *file)
 				   msecs_to_jiffies(S2255_LOAD_TIMEOUT));
 		if (atomic_read(&dev->fw_data->fw_state)
 		    != S2255_FW_SUCCESS) {
-			printk(KERN_INFO "2255 FW load failed after 2 tries\n");
+			printk(KERN_INFO "2255 FW load failed.\n");
+			dev->users[cur_channel]--;
 			mutex_unlock(&dev->open_lock);
 			return -EFAULT;
 		}
@@ -1494,6 +1503,7 @@ static int s2255_open(struct inode *inode, struct file *file)
 		    != S2255_FW_SUCCESS) {
 			printk(KERN_INFO "2255 firmware not loaded"
 			       "try again\n");
+			dev->users[cur_channel]--;
 			mutex_unlock(&dev->open_lock);
 			return -EBUSY;
 		}
@@ -1502,6 +1512,7 @@ static int s2255_open(struct inode *inode, struct file *file)
 	/* allocate + initialize per filehandle data */
 	fh = kzalloc(sizeof(*fh), GFP_KERNEL);
 	if (NULL == fh) {
+		dev->users[cur_channel]--;
 		mutex_unlock(&dev->open_lock);
 		return -ENOMEM;
 	}
@@ -1561,44 +1572,48 @@ static void s2255_destroy(struct kref *kref)
 		printk(KERN_ERR "s2255drv: kref problem\n");
 		return;
 	}
+
+	/*
+	 * Wake up any firmware load waiting (only done in .open,
+	 * which holds the open_lock mutex)
+	 */
+	atomic_set(&dev->fw_data->fw_state, S2255_FW_DISCONNECTING);
+	wake_up(&dev->fw_data->wait_fw);
+
 	/* prevent s2255_disconnect from racing s2255_open */
 	mutex_lock(&dev->open_lock);
 	s2255_exit_v4l(dev);
-	/* device unregistered so no longer possible to open. open_mutex
-	   can be unlocked */
+	/*
+	 * device unregistered so no longer possible to open. open_mutex
+	 *  can be unlocked and timers deleted afterwards.
+	 */
 	mutex_unlock(&dev->open_lock);
 
 	/* board shutdown stops the read pipe if it is running */
 	s2255_board_shutdown(dev);
 
 	/* make sure firmware still not trying to load */
+	del_timer(&dev->timer);  /* only started in .probe and .open */
+
 	if (dev->fw_data->fw_urb) {
 		dprintk(2, "kill fw_urb\n");
 		usb_kill_urb(dev->fw_data->fw_urb);
 		usb_free_urb(dev->fw_data->fw_urb);
 		dev->fw_data->fw_urb = NULL;
 	}
+
 	/*
-	 * TODO: fixme(above, below): potentially leaving timers alive.
-	 *                            do not ignore timeout below if
-	 *                            it occurs.
+	 * delete the dsp_wait timer, which sets the firmware
+	 * state on completion.  This is done before fw_data
+	 * is freed below.
 	 */
 
-	/* make sure we aren't waiting for the DSP */
-	if (atomic_read(&dev->fw_data->fw_state) == S2255_FW_LOADED_DSPWAIT) {
-		/* if we are, wait for the wakeup for fw_success or timeout */
-		wait_event_timeout(dev->fw_data->wait_fw,
-				   (atomic_read(&dev->fw_data->fw_state)
-				   == S2255_FW_SUCCESS),
-				   msecs_to_jiffies(S2255_LOAD_TIMEOUT));
-	}
+	del_timer(&dev->fw_data->dsp_wait); /* only started in .open */
 
-	if (dev->fw_data) {
-		if (dev->fw_data->fw)
-			release_firmware(dev->fw_data->fw);
-		kfree(dev->fw_data->pfw_data);
-		kfree(dev->fw_data);
-	}
+	if (dev->fw_data->fw)
+		release_firmware(dev->fw_data->fw);
+	kfree(dev->fw_data->pfw_data);
+	kfree(dev->fw_data);
 
 	usb_put_dev(dev->udev);
 	dprintk(1, "%s", __func__);
@@ -1615,17 +1630,23 @@ static int s2255_close(struct inode *inode, struct file *file)
 
 	mutex_lock(&dev->open_lock);
 
-	if (dev->b_acquire[fh->channel])
-		s2255_stop_acquire(dev, fh->channel);
-	res_free(dev, fh);
+	/* turn off stream */
+	if (res_check(fh)) {
+		if (dev->b_acquire[fh->channel])
+			s2255_stop_acquire(dev, fh->channel);
+		videobuf_streamoff(&fh->vb_vidq);
+		res_free(dev, fh);
+	}
+
 	videobuf_mmap_free(&fh->vb_vidq);
-	kfree(fh);
 	dev->users[fh->channel]--;
+
 	mutex_unlock(&dev->open_lock);
 
 	kref_put(&dev->kref, s2255_destroy);
 	dprintk(1, "s2255: close called (minor=%d, users=%d)\n",
 		minor, dev->users[fh->channel]);
+	kfree(fh);
 	return 0;
 }
 
@@ -1658,12 +1679,7 @@ static const struct file_operations s2255_fops_v4l = {
 	.llseek = no_llseek,
 };
 
-static struct video_device template = {
-	.name = "s2255v",
-	.type = VID_TYPE_CAPTURE,
-	.fops = &s2255_fops_v4l,
-	.minor = -1,
-	.release = video_device_release,
+static const struct v4l2_ioctl_ops s2255_ioctl_ops = {
 	.vidioc_querycap = vidioc_querycap,
 	.vidioc_enum_fmt_vid_cap = vidioc_enum_fmt_vid_cap,
 	.vidioc_g_fmt_vid_cap = vidioc_g_fmt_vid_cap,
@@ -1685,6 +1701,14 @@ static struct video_device template = {
 #ifdef CONFIG_VIDEO_V4L1_COMPAT
 	.vidiocgmbuf = vidioc_cgmbuf,
 #endif
+};
+
+static struct video_device template = {
+	.name = "s2255v",
+	.fops = &s2255_fops_v4l,
+	.ioctl_ops = &s2255_ioctl_ops,
+	.minor = -1,
+	.release = video_device_release,
 	.tvnorms = S2255_NORMS,
 	.current_norm = V4L2_STD_NTSC_M,
 };
@@ -1706,7 +1730,7 @@ static int s2255_probe_v4l(struct s2255_dev *dev)
 		/* register 4 video devices */
 		dev->vdev[i] = video_device_alloc();
 		memcpy(dev->vdev[i], &template, sizeof(struct video_device));
-		dev->vdev[i]->dev = &dev->interface->dev;
+		dev->vdev[i]->parent = &dev->interface->dev;
 		if (video_nr == -1)
 			ret = video_register_device(dev->vdev[i],
 						    VFL_TYPE_GRABBER,
diff --git a/drivers/media/video/saa5246a.c b/drivers/media/video/saa5246a.c
index 03e772130b55..6ee63e69b36c 100644
--- a/drivers/media/video/saa5246a.c
+++ b/drivers/media/video/saa5246a.c
@@ -46,6 +46,7 @@
 #include <linux/videotext.h>
 #include <linux/videodev.h>
 #include <media/v4l2-common.h>
+#include <media/v4l2-ioctl.h>
 #include <linux/mutex.h>
 
 #include "saa5246a.h"
@@ -829,9 +830,7 @@ static const struct file_operations saa_fops = {
 
 static struct video_device saa_template =
 {
-	.owner	  = THIS_MODULE,
 	.name	  = IF_NAME,
-	.type	  = VID_TYPE_TELETEXT,
 	.fops	  = &saa_fops,
 	.release  = video_device_release,
 	.minor    = -1,
diff --git a/drivers/media/video/saa5249.c b/drivers/media/video/saa5249.c
index fde99d9ee71f..0d639738d4e6 100644
--- a/drivers/media/video/saa5249.c
+++ b/drivers/media/video/saa5249.c
@@ -57,6 +57,7 @@
 #include <linux/videotext.h>
 #include <linux/videodev.h>
 #include <media/v4l2-common.h>
+#include <media/v4l2-ioctl.h>
 #include <linux/mutex.h>
 
 
@@ -710,9 +711,7 @@ static const struct file_operations saa_fops = {
 
 static struct video_device saa_template =
 {
-	.owner		= THIS_MODULE,
 	.name		= IF_NAME,
-	.type		= VID_TYPE_TELETEXT,	/*| VID_TYPE_TUNER ?? */
 	.fops           = &saa_fops,
 };
 
diff --git a/drivers/media/video/saa7134/Kconfig b/drivers/media/video/saa7134/Kconfig
index 83f076abce35..7021bbf5897b 100644
--- a/drivers/media/video/saa7134/Kconfig
+++ b/drivers/media/video/saa7134/Kconfig
@@ -27,9 +27,7 @@ config VIDEO_SAA7134_ALSA
 config VIDEO_SAA7134_DVB
 	tristate "DVB/ATSC Support for saa7134 based TV cards"
 	depends on VIDEO_SAA7134 && DVB_CORE
-	depends on HOTPLUG	# due to FW_LOADER
 	select VIDEOBUF_DVB
-	select FW_LOADER
 	select DVB_PLL if !DVB_FE_CUSTOMISE
 	select DVB_MT352 if !DVB_FE_CUSTOMISE
 	select DVB_TDA1004X if !DVB_FE_CUSTOMISE
diff --git a/drivers/media/video/saa7134/saa7134-cards.c b/drivers/media/video/saa7134/saa7134-cards.c
index 6893f998d292..98364d171def 100644
--- a/drivers/media/video/saa7134/saa7134-cards.c
+++ b/drivers/media/video/saa7134/saa7134-cards.c
@@ -5853,9 +5853,6 @@ int saa7134_board_init2(struct saa7134_dev *dev)
 	unsigned char buf;
 	int board;
 
-	dev->tuner_type = saa7134_boards[dev->board].tuner_type;
-	dev->tuner_addr = saa7134_boards[dev->board].tuner_addr;
-
 	switch (dev->board) {
 	case SAA7134_BOARD_BMK_MPEX_NOTUNER:
 	case SAA7134_BOARD_BMK_MPEX_TUNER:
diff --git a/drivers/media/video/saa7134/saa7134-core.c b/drivers/media/video/saa7134/saa7134-core.c
index cfee84ee7a88..75d618415f4f 100644
--- a/drivers/media/video/saa7134/saa7134-core.c
+++ b/drivers/media/video/saa7134/saa7134-core.c
@@ -798,7 +798,7 @@ static struct video_device *vdev_init(struct saa7134_dev *dev,
 		return NULL;
 	*vfd = *template;
 	vfd->minor   = -1;
-	vfd->dev     = &dev->pci->dev;
+	vfd->parent  = &dev->pci->dev;
 	vfd->release = video_device_release;
 	vfd->debug   = video_debug;
 	snprintf(vfd->name, sizeof(vfd->name), "%s %s (%s)",
@@ -945,11 +945,12 @@ static int __devinit saa7134_initdev(struct pci_dev *pci_dev,
 		dev->board = SAA7134_BOARD_UNKNOWN;
 	}
 	dev->autodetected = card[dev->nr] != dev->board;
-	dev->tuner_type   = saa7134_boards[dev->board].tuner_type;
+	dev->tuner_type = saa7134_boards[dev->board].tuner_type;
+	dev->tuner_addr = saa7134_boards[dev->board].tuner_addr;
 	dev->tda9887_conf = saa7134_boards[dev->board].tda9887_conf;
 	if (UNSET != tuner[dev->nr])
 		dev->tuner_type = tuner[dev->nr];
-		printk(KERN_INFO "%s: subsystem: %04x:%04x, board: %s [card=%d,%s]\n",
+	printk(KERN_INFO "%s: subsystem: %04x:%04x, board: %s [card=%d,%s]\n",
 		dev->name,pci_dev->subsystem_vendor,
 		pci_dev->subsystem_device,saa7134_boards[dev->board].name,
 		dev->board, dev->autodetected ?
@@ -1007,11 +1008,9 @@ static int __devinit saa7134_initdev(struct pci_dev *pci_dev,
 	v4l2_prio_init(&dev->prio);
 
 	/* register v4l devices */
-	if (saa7134_no_overlay <= 0) {
-		saa7134_video_template.type |= VID_TYPE_OVERLAY;
-	} else {
-		printk("%s: Overlay support disabled.\n",dev->name);
-	}
+	if (saa7134_no_overlay > 0)
+		printk(KERN_INFO "%s: Overlay support disabled.\n", dev->name);
+
 	dev->video_dev = vdev_init(dev,&saa7134_video_template,"video");
 	err = video_register_device(dev->video_dev,VFL_TYPE_GRABBER,
 				    video_nr[dev->nr]);
@@ -1024,7 +1023,6 @@ static int __devinit saa7134_initdev(struct pci_dev *pci_dev,
 	       dev->name,dev->video_dev->minor & 0x1f);
 
 	dev->vbi_dev = vdev_init(dev, &saa7134_video_template, "vbi");
-	dev->vbi_dev->type = VID_TYPE_TUNER | VID_TYPE_TELETEXT;
 
 	err = video_register_device(dev->vbi_dev,VFL_TYPE_VBI,
 				    vbi_nr[dev->nr]);
diff --git a/drivers/media/video/saa7134/saa7134-empress.c b/drivers/media/video/saa7134/saa7134-empress.c
index 2a5ab957542d..c0c5d7509c25 100644
--- a/drivers/media/video/saa7134/saa7134-empress.c
+++ b/drivers/media/video/saa7134/saa7134-empress.c
@@ -89,14 +89,14 @@ static int ts_open(struct inode *inode, struct file *file)
 	err = -EBUSY;
 	if (!mutex_trylock(&dev->empress_tsq.vb_lock))
 		goto done;
-	if (dev->empress_users)
+	if (atomic_read(&dev->empress_users))
 		goto done_up;
 
 	/* Unmute audio */
 	saa_writeb(SAA7134_AUDIO_MUTE_CTRL,
 		saa_readb(SAA7134_AUDIO_MUTE_CTRL) & ~(1 << 6));
 
-	dev->empress_users++;
+	atomic_inc(&dev->empress_users);
 	file->private_data = dev;
 	err = 0;
 
@@ -110,8 +110,6 @@ static int ts_release(struct inode *inode, struct file *file)
 {
 	struct saa7134_dev *dev = file->private_data;
 
-	mutex_lock(&dev->empress_tsq.vb_lock);
-
 	videobuf_stop(&dev->empress_tsq);
 	videobuf_mmap_free(&dev->empress_tsq);
 
@@ -122,9 +120,7 @@ static int ts_release(struct inode *inode, struct file *file)
 	saa_writeb(SAA7134_AUDIO_MUTE_CTRL,
 		saa_readb(SAA7134_AUDIO_MUTE_CTRL) | (1 << 6));
 
-	dev->empress_users--;
-
-	mutex_unlock(&dev->empress_tsq.vb_lock);
+	atomic_dec(&dev->empress_users);
 
 	return 0;
 }
@@ -333,6 +329,22 @@ static int empress_g_ext_ctrls(struct file *file, void *priv,
 	return saa7134_i2c_call_saa6752(dev, VIDIOC_G_EXT_CTRLS, ctrls);
 }
 
+static int empress_g_ctrl(struct file *file, void *priv,
+					struct v4l2_control *c)
+{
+	struct saa7134_dev *dev = file->private_data;
+
+	return saa7134_g_ctrl_internal(dev, NULL, c);
+}
+
+static int empress_s_ctrl(struct file *file, void *priv,
+					struct v4l2_control *c)
+{
+	struct saa7134_dev *dev = file->private_data;
+
+	return saa7134_s_ctrl_internal(dev, NULL, c);
+}
+
 static int empress_queryctrl(struct file *file, void *priv,
 					struct v4l2_queryctrl *c)
 {
@@ -400,16 +412,7 @@ static const struct file_operations ts_fops =
 	.llseek   = no_llseek,
 };
 
-/* ----------------------------------------------------------- */
-
-static struct video_device saa7134_empress_template =
-{
-	.name          = "saa7134-empress",
-	.type          = 0 /* FIXME */,
-	.type2         = 0 /* FIXME */,
-	.fops          = &ts_fops,
-	.minor	       = -1,
-
+static const struct v4l2_ioctl_ops ts_ioctl_ops = {
 	.vidioc_querycap		= empress_querycap,
 	.vidioc_enum_fmt_vid_cap	= empress_enum_fmt_vid_cap,
 	.vidioc_s_fmt_vid_cap		= empress_s_fmt_vid_cap,
@@ -428,8 +431,17 @@ static struct video_device saa7134_empress_template =
 
 	.vidioc_queryctrl		= empress_queryctrl,
 	.vidioc_querymenu		= empress_querymenu,
-	.vidioc_g_ctrl			= saa7134_g_ctrl,
-	.vidioc_s_ctrl			= saa7134_s_ctrl,
+	.vidioc_g_ctrl			= empress_g_ctrl,
+	.vidioc_s_ctrl			= empress_s_ctrl,
+};
+
+/* ----------------------------------------------------------- */
+
+static struct video_device saa7134_empress_template = {
+	.name          = "saa7134-empress",
+	.fops          = &ts_fops,
+	.minor	       = -1,
+	.ioctl_ops     = &ts_ioctl_ops,
 
 	.tvnorms			= SAA7134_NORMS,
 	.current_norm			= V4L2_STD_PAL,
@@ -445,7 +457,7 @@ static void empress_signal_update(struct work_struct *work)
 		ts_reset_encoder(dev);
 	} else {
 		dprintk("video signal acquired\n");
-		if (dev->empress_users)
+		if (atomic_read(&dev->empress_users))
 			ts_init_encoder(dev);
 	}
 }
@@ -465,7 +477,7 @@ static int empress_init(struct saa7134_dev *dev)
 	if (NULL == dev->empress_dev)
 		return -ENOMEM;
 	*(dev->empress_dev) = saa7134_empress_template;
-	dev->empress_dev->dev     = &dev->pci->dev;
+	dev->empress_dev->parent  = &dev->pci->dev;
 	dev->empress_dev->release = video_device_release;
 	snprintf(dev->empress_dev->name, sizeof(dev->empress_dev->name),
 		 "%s empress (%s)", dev->name,
diff --git a/drivers/media/video/saa7134/saa7134-video.c b/drivers/media/video/saa7134/saa7134-video.c
index 1a5137550e7a..68c268981861 100644
--- a/drivers/media/video/saa7134/saa7134-video.c
+++ b/drivers/media/video/saa7134/saa7134-video.c
@@ -1112,10 +1112,8 @@ static struct videobuf_queue_ops video_qops = {
 
 /* ------------------------------------------------------------------ */
 
-int saa7134_g_ctrl(struct file *file, void *priv, struct v4l2_control *c)
+int saa7134_g_ctrl_internal(struct saa7134_dev *dev, struct saa7134_fh *fh, struct v4l2_control *c)
 {
-	struct saa7134_fh *fh = priv;
-	struct saa7134_dev *dev = fh->dev;
 	const struct v4l2_queryctrl* ctrl;
 
 	ctrl = ctrl_by_id(c->id);
@@ -1160,20 +1158,31 @@ int saa7134_g_ctrl(struct file *file, void *priv, struct v4l2_control *c)
 	}
 	return 0;
 }
-EXPORT_SYMBOL_GPL(saa7134_g_ctrl);
+EXPORT_SYMBOL_GPL(saa7134_g_ctrl_internal);
+
+static int saa7134_g_ctrl(struct file *file, void *priv, struct v4l2_control *c)
+{
+	struct saa7134_fh *fh = priv;
+
+	return saa7134_g_ctrl_internal(fh->dev, fh, c);
+}
 
-int saa7134_s_ctrl(struct file *file, void *f, struct v4l2_control *c)
+int saa7134_s_ctrl_internal(struct saa7134_dev *dev,  struct saa7134_fh *fh, struct v4l2_control *c)
 {
 	const struct v4l2_queryctrl* ctrl;
-	struct saa7134_fh *fh = f;
-	struct saa7134_dev *dev = fh->dev;
 	unsigned long flags;
 	int restart_overlay = 0;
-	int err = -EINVAL;
+	int err;
 
-	err = v4l2_prio_check(&dev->prio, &fh->prio);
-	if (0 != err)
-		return err;
+	/* When called from the empress code fh == NULL.
+	   That needs to be fixed somehow, but for now this is
+	   good enough. */
+	if (fh) {
+		err = v4l2_prio_check(&dev->prio, &fh->prio);
+		if (0 != err)
+			return err;
+	}
+	err = -EINVAL;
 
 	mutex_lock(&dev->lock);
 
@@ -1274,7 +1283,14 @@ error:
 	mutex_unlock(&dev->lock);
 	return err;
 }
-EXPORT_SYMBOL_GPL(saa7134_s_ctrl);
+EXPORT_SYMBOL_GPL(saa7134_s_ctrl_internal);
+
+static int saa7134_s_ctrl(struct file *file, void *f, struct v4l2_control *c)
+{
+	struct saa7134_fh *fh = f;
+
+	return saa7134_s_ctrl_internal(fh->dev, fh, c);
+}
 
 /* ------------------------------------------------------------------ */
 
@@ -2353,26 +2369,7 @@ static const struct file_operations video_fops =
 	.llseek   = no_llseek,
 };
 
-static const struct file_operations radio_fops =
-{
-	.owner	  = THIS_MODULE,
-	.open	  = video_open,
-	.release  = video_release,
-	.ioctl	  = video_ioctl2,
-	.compat_ioctl	= v4l_compat_ioctl32,
-	.llseek   = no_llseek,
-};
-
-/* ----------------------------------------------------------- */
-/* exported stuff                                              */
-
-struct video_device saa7134_video_template =
-{
-	.name				= "saa7134-video",
-	.type				= VID_TYPE_CAPTURE|VID_TYPE_TUNER |
-					VID_TYPE_CLIPPING|VID_TYPE_SCALES,
-	.fops				= &video_fops,
-	.minor				= -1,
+static const struct v4l2_ioctl_ops video_ioctl_ops = {
 	.vidioc_querycap		= saa7134_querycap,
 	.vidioc_enum_fmt_vid_cap	= saa7134_enum_fmt_vid_cap,
 	.vidioc_g_fmt_vid_cap		= saa7134_g_fmt_vid_cap,
@@ -2421,16 +2418,18 @@ struct video_device saa7134_video_template =
 	.vidioc_g_register              = vidioc_g_register,
 	.vidioc_s_register              = vidioc_s_register,
 #endif
-	.tvnorms			= SAA7134_NORMS,
-	.current_norm			= V4L2_STD_PAL,
 };
 
-struct video_device saa7134_radio_template =
-{
-	.name			= "saa7134-radio",
-	.type			= VID_TYPE_TUNER,
-	.fops			= &radio_fops,
-	.minor			= -1,
+static const struct file_operations radio_fops = {
+	.owner	  = THIS_MODULE,
+	.open	  = video_open,
+	.release  = video_release,
+	.ioctl	  = video_ioctl2,
+	.compat_ioctl	= v4l_compat_ioctl32,
+	.llseek   = no_llseek,
+};
+
+static const struct v4l2_ioctl_ops radio_ioctl_ops = {
 	.vidioc_querycap	= radio_querycap,
 	.vidioc_g_tuner		= radio_g_tuner,
 	.vidioc_enum_input	= radio_enum_input,
@@ -2447,6 +2446,25 @@ struct video_device saa7134_radio_template =
 	.vidioc_s_frequency	= saa7134_s_frequency,
 };
 
+/* ----------------------------------------------------------- */
+/* exported stuff                                              */
+
+struct video_device saa7134_video_template = {
+	.name				= "saa7134-video",
+	.fops				= &video_fops,
+	.ioctl_ops 			= &video_ioctl_ops,
+	.minor				= -1,
+	.tvnorms			= SAA7134_NORMS,
+	.current_norm			= V4L2_STD_PAL,
+};
+
+struct video_device saa7134_radio_template = {
+	.name			= "saa7134-radio",
+	.fops			= &radio_fops,
+	.ioctl_ops 		= &radio_ioctl_ops,
+	.minor			= -1,
+};
+
 int saa7134_video_init1(struct saa7134_dev *dev)
 {
 	/* sanitycheck insmod options */
diff --git a/drivers/media/video/saa7134/saa7134.h b/drivers/media/video/saa7134/saa7134.h
index 6927cbea8624..a0884f639f65 100644
--- a/drivers/media/video/saa7134/saa7134.h
+++ b/drivers/media/video/saa7134/saa7134.h
@@ -34,6 +34,7 @@
 #include <asm/io.h>
 
 #include <media/v4l2-common.h>
+#include <media/v4l2-ioctl.h>
 #include <media/tuner.h>
 #include <media/ir-common.h>
 #include <media/ir-kbd-i2c.h>
@@ -560,7 +561,7 @@ struct saa7134_dev {
 	/* SAA7134_MPEG_EMPRESS only */
 	struct video_device        *empress_dev;
 	struct videobuf_queue      empress_tsq;
-	unsigned int               empress_users;
+	atomic_t 		   empress_users;
 	struct work_struct         empress_workqueue;
 	int                        empress_started;
 
@@ -662,8 +663,8 @@ extern unsigned int video_debug;
 extern struct video_device saa7134_video_template;
 extern struct video_device saa7134_radio_template;
 
-int saa7134_g_ctrl(struct file *file, void *priv, struct v4l2_control *c);
-int saa7134_s_ctrl(struct file *file, void *f, struct v4l2_control *c);
+int saa7134_s_ctrl_internal(struct saa7134_dev *dev,  struct saa7134_fh *fh, struct v4l2_control *c);
+int saa7134_g_ctrl_internal(struct saa7134_dev *dev,  struct saa7134_fh *fh, struct v4l2_control *c);
 int saa7134_queryctrl(struct file *file, void *priv, struct v4l2_queryctrl *c);
 
 int saa7134_videoport_init(struct saa7134_dev *dev);
diff --git a/drivers/media/video/saa717x.c b/drivers/media/video/saa717x.c
index 2220f9569941..af60ede5310d 100644
--- a/drivers/media/video/saa717x.c
+++ b/drivers/media/video/saa717x.c
@@ -35,7 +35,6 @@
 #include <linux/kernel.h>
 #include <linux/sched.h>
 
-#include <linux/videodev.h>
 #include <linux/videodev2.h>
 #include <linux/i2c.h>
 #include <media/v4l2-common.h>
diff --git a/drivers/media/video/saa7196.h b/drivers/media/video/saa7196.h
deleted file mode 100644
index cd4b6354a7b3..000000000000
--- a/drivers/media/video/saa7196.h
+++ /dev/null
@@ -1,117 +0,0 @@
-/*
-    Definitions for the Philips SAA7196 digital video decoder,
-    scaler, and clock generator circuit (DESCpro), as used in
-    the PlanB video input of the Powermac 7x00/8x00 series.
-
-    Copyright (C) 1998 Michel Lanners (mlan@cpu.lu)
-
-    The register defines are shamelessly copied from the meteor
-    driver out of NetBSD (with permission),
-    and are copyrighted (c) 1995 Mark Tinguely and Jim Lowe
-    (Thanks !)
-
-    Additional debugging and coding by Takashi Oe (toe@unlinfo.unl.edu)
-
-    The default values used for PlanB are my mistakes.
-*/
-
-/* $Id: saa7196.h,v 1.5 1999/03/26 23:28:47 mlan Exp $ */
-
-#ifndef _SAA7196_H_
-#define _SAA7196_H_
-
-#define SAA7196_NUMREGS	0x31	/* Number of registers (used)*/
-#define NUM_SUPPORTED_NORM 3	/* Number of supported norms by PlanB */
-
-/* Decoder part: */
-#define SAA7196_IDEL    0x00    /* Increment delay */
-#define SAA7196_HSB5    0x01    /* H-sync begin; 50 hz */
-#define SAA7196_HSS5    0x02    /* H-sync stop; 50 hz */
-#define SAA7196_HCB5    0x03    /* H-clamp begin; 50 hz */
-#define SAA7196_HCS5    0x04    /* H-clamp stop; 50 hz */
-#define SAA7196_HSP5    0x05    /* H-sync after PHI1; 50 hz */
-#define SAA7196_LUMC    0x06    /* Luminance control */
-#define SAA7196_HUEC    0x07    /* Hue control */
-#define SAA7196_CKTQ    0x08    /* Colour Killer Threshold QAM (PAL, NTSC) */
-#define SAA7196_CKTS    0x09    /* Colour Killer Threshold SECAM */
-#define SAA7196_PALS    0x0a    /* PAL switch sensitivity */
-#define SAA7196_SECAMS  0x0b    /* SECAM switch sensitivity */
-#define SAA7196_CGAINC  0x0c    /* Chroma gain control */
-#define SAA7196_STDC    0x0d    /* Standard/Mode control */
-#define SAA7196_IOCC    0x0e    /* I/O and Clock Control */
-#define SAA7196_CTRL1   0x0f    /* Control #1 */
-#define SAA7196_CTRL2   0x10    /* Control #2 */
-#define SAA7196_CGAINR  0x11    /* Chroma Gain Reference */
-#define SAA7196_CSAT    0x12    /* Chroma Saturation */
-#define SAA7196_CONT    0x13    /* Luminance Contrast */
-#define SAA7196_HSB6    0x14    /* H-sync begin; 60 hz */
-#define SAA7196_HSS6    0x15    /* H-sync stop; 60 hz */
-#define SAA7196_HCB6    0x16    /* H-clamp begin; 60 hz */
-#define SAA7196_HCS6    0x17    /* H-clamp stop; 60 hz */
-#define SAA7196_HSP6    0x18    /* H-sync after PHI1; 60 hz */
-#define SAA7196_BRIG    0x19    /* Luminance Brightness */
-
-/* Scaler part: */
-#define SAA7196_FMTS    0x20    /* Formats and sequence */
-#define SAA7196_OUTPIX  0x21    /* Output data pixel/line */
-#define SAA7196_INPIX   0x22    /* Input data pixel/line */
-#define SAA7196_HWS     0x23    /* Horiz. window start */
-#define SAA7196_HFILT   0x24    /* Horiz. filter */
-#define SAA7196_OUTLINE 0x25    /* Output data lines/field */
-#define SAA7196_INLINE  0x26    /* Input data lines/field */
-#define SAA7196_VWS     0x27    /* Vertical window start */
-#define SAA7196_VYP     0x28    /* AFS/vertical Y processing */
-#define SAA7196_VBS     0x29    /* Vertical Bypass start */
-#define SAA7196_VBCNT   0x2a    /* Vertical Bypass count */
-#define SAA7196_VBP     0x2b    /* veritcal Bypass Polarity */
-#define SAA7196_VLOW    0x2c    /* Colour-keying lower V limit */
-#define SAA7196_VHIGH   0x2d    /* Colour-keying upper V limit */
-#define SAA7196_ULOW    0x2e    /* Colour-keying lower U limit */
-#define SAA7196_UHIGH   0x2f    /* Colour-keying upper U limit */
-#define SAA7196_DPATH   0x30    /* Data path setting  */
-
-/* Initialization default values: */
-
-unsigned char saa_regs[NUM_SUPPORTED_NORM][SAA7196_NUMREGS] = {
-
-/* PAL, 768x576 (no scaling), composite video-in */
-/* Decoder: */
-      { 0x50, 0x30, 0x00, 0xe8, 0xb6, 0xe5, 0x63, 0xff,
-	0xfe, 0xf0, 0xfe, 0xe0, 0x20, 0x06, 0x3b, 0x98,
-	0x00, 0x59, 0x41, 0x45, 0x34, 0x0a, 0xf4, 0xd2,
-	0xe9, 0xa2,
-/* Padding */
-		    0x80, 0x80, 0x80, 0x80, 0x80, 0x80,
-/* Scaler: */
-	0x72, 0x80, 0x00, 0x03, 0x8d, 0x20, 0x20, 0x12,
-	0xa5, 0x12, 0x00, 0x00, 0x04, 0x00, 0x04, 0x00,
-	0x87 },
-
-/* NTSC, 640x480? (no scaling), composite video-in */
-/* Decoder: */
-      { 0x50, 0x30, 0x00, 0xe8, 0xb6, 0xe5, 0x50, 0x00,
-	0xf8, 0xf0, 0xfe, 0xe0, 0x00, 0x06, 0x3b, 0x98,
-	0x00, 0x2c, 0x3d, 0x40, 0x34, 0x0a, 0xf4, 0xd2,
-	0xe9, 0x98,
-/* Padding */
-		    0x80, 0x80, 0x80, 0x80, 0x80, 0x80,
-/* Scaler: */
-	0x72, 0x80, 0x80, 0x03, 0x89, 0xf0, 0xf0, 0x0d,
-	0xa0, 0x0d, 0x00, 0x00, 0x04, 0x00, 0x04, 0x00,
-	0x87 },
-
-/* SECAM, 768x576 (no scaling), composite video-in */
-/* Decoder: */
-      { 0x50, 0x30, 0x00, 0xe8, 0xb6, 0xe5, 0x63, 0xff,
-	0xfe, 0xf0, 0xfe, 0xe0, 0x20, 0x07, 0x3b, 0x98,
-	0x00, 0x59, 0x41, 0x45, 0x34, 0x0a, 0xf4, 0xd2,
-	0xe9, 0xa2,
-/* Padding */
-		    0x80, 0x80, 0x80, 0x80, 0x80, 0x80,
-/* Scaler: */
-	0x72, 0x80, 0x00, 0x03, 0x8d, 0x20, 0x20, 0x12,
-	0xa5, 0x12, 0x00, 0x00, 0x04, 0x00, 0x04, 0x00,
-	0x87 }
-	};
-
-#endif /* _SAA7196_H_ */
diff --git a/drivers/media/video/se401.c b/drivers/media/video/se401.c
index 1cd629380f71..f481277892da 100644
--- a/drivers/media/video/se401.c
+++ b/drivers/media/video/se401.c
@@ -1230,9 +1230,7 @@ static const struct file_operations se401_fops = {
 	.llseek =       no_llseek,
 };
 static struct video_device se401_template = {
-	.owner =	THIS_MODULE,
 	.name =         "se401 USB camera",
-	.type =         VID_TYPE_CAPTURE,
 	.fops =         &se401_fops,
 };
 
diff --git a/drivers/media/video/se401.h b/drivers/media/video/se401.h
index 835ef872e803..2ce685db5d8b 100644
--- a/drivers/media/video/se401.h
+++ b/drivers/media/video/se401.h
@@ -5,6 +5,7 @@
 #include <asm/uaccess.h>
 #include <linux/videodev.h>
 #include <media/v4l2-common.h>
+#include <media/v4l2-ioctl.h>
 #include <linux/mutex.h>
 
 #define se401_DEBUG	/* Turn on debug messages */
diff --git a/drivers/media/video/sh_mobile_ceu_camera.c b/drivers/media/video/sh_mobile_ceu_camera.c
index 012005e1a77b..318754e73132 100644
--- a/drivers/media/video/sh_mobile_ceu_camera.c
+++ b/drivers/media/video/sh_mobile_ceu_camera.c
@@ -91,6 +91,7 @@ struct sh_mobile_ceu_dev {
 	void __iomem *base;
 	unsigned long video_limit;
 
+	/* lock used to protect videobuf */
 	spinlock_t lock;
 	struct list_head capture;
 	struct videobuf_buffer *active;
@@ -646,7 +647,7 @@ static int __init sh_mobile_ceu_init(void)
 
 static void __exit sh_mobile_ceu_exit(void)
 {
-	return platform_driver_unregister(&sh_mobile_ceu_driver);
+	platform_driver_unregister(&sh_mobile_ceu_driver);
 }
 
 module_init(sh_mobile_ceu_init);
diff --git a/drivers/media/video/sn9c102/sn9c102.h b/drivers/media/video/sn9c102/sn9c102.h
index 0c8d87d8d18d..cbfc44433b99 100644
--- a/drivers/media/video/sn9c102/sn9c102.h
+++ b/drivers/media/video/sn9c102/sn9c102.h
@@ -25,6 +25,7 @@
 #include <linux/usb.h>
 #include <linux/videodev2.h>
 #include <media/v4l2-common.h>
+#include <media/v4l2-ioctl.h>
 #include <linux/device.h>
 #include <linux/list.h>
 #include <linux/spinlock.h>
diff --git a/drivers/media/video/sn9c102/sn9c102_core.c b/drivers/media/video/sn9c102/sn9c102_core.c
index 7f9c7bcf3c85..23408764d0ef 100644
--- a/drivers/media/video/sn9c102/sn9c102_core.c
+++ b/drivers/media/video/sn9c102/sn9c102_core.c
@@ -1038,8 +1038,7 @@ static ssize_t sn9c102_show_reg(struct device* cd,
 	if (mutex_lock_interruptible(&sn9c102_sysfs_lock))
 		return -ERESTARTSYS;
 
-	cam = video_get_drvdata(container_of(cd, struct video_device,
-					     class_dev));
+	cam = video_get_drvdata(container_of(cd, struct video_device, dev));
 	if (!cam) {
 		mutex_unlock(&sn9c102_sysfs_lock);
 		return -ENODEV;
@@ -1064,8 +1063,7 @@ sn9c102_store_reg(struct device* cd, struct device_attribute *attr,
 	if (mutex_lock_interruptible(&sn9c102_sysfs_lock))
 		return -ERESTARTSYS;
 
-	cam = video_get_drvdata(container_of(cd, struct video_device,
-					     class_dev));
+	cam = video_get_drvdata(container_of(cd, struct video_device, dev));
 	if (!cam) {
 		mutex_unlock(&sn9c102_sysfs_lock);
 		return -ENODEV;
@@ -1098,8 +1096,7 @@ static ssize_t sn9c102_show_val(struct device* cd,
 	if (mutex_lock_interruptible(&sn9c102_sysfs_lock))
 		return -ERESTARTSYS;
 
-	cam = video_get_drvdata(container_of(cd, struct video_device,
-					     class_dev));
+	cam = video_get_drvdata(container_of(cd, struct video_device, dev));
 	if (!cam) {
 		mutex_unlock(&sn9c102_sysfs_lock);
 		return -ENODEV;
@@ -1132,8 +1129,7 @@ sn9c102_store_val(struct device* cd, struct device_attribute *attr,
 	if (mutex_lock_interruptible(&sn9c102_sysfs_lock))
 		return -ERESTARTSYS;
 
-	cam = video_get_drvdata(container_of(cd, struct video_device,
-					     class_dev));
+	cam = video_get_drvdata(container_of(cd, struct video_device, dev));
 	if (!cam) {
 		mutex_unlock(&sn9c102_sysfs_lock);
 		return -ENODEV;
@@ -1170,8 +1166,7 @@ static ssize_t sn9c102_show_i2c_reg(struct device* cd,
 	if (mutex_lock_interruptible(&sn9c102_sysfs_lock))
 		return -ERESTARTSYS;
 
-	cam = video_get_drvdata(container_of(cd, struct video_device,
-					     class_dev));
+	cam = video_get_drvdata(container_of(cd, struct video_device, dev));
 	if (!cam) {
 		mutex_unlock(&sn9c102_sysfs_lock);
 		return -ENODEV;
@@ -1198,8 +1193,7 @@ sn9c102_store_i2c_reg(struct device* cd, struct device_attribute *attr,
 	if (mutex_lock_interruptible(&sn9c102_sysfs_lock))
 		return -ERESTARTSYS;
 
-	cam = video_get_drvdata(container_of(cd, struct video_device,
-					     class_dev));
+	cam = video_get_drvdata(container_of(cd, struct video_device, dev));
 	if (!cam) {
 		mutex_unlock(&sn9c102_sysfs_lock);
 		return -ENODEV;
@@ -1232,8 +1226,7 @@ static ssize_t sn9c102_show_i2c_val(struct device* cd,
 	if (mutex_lock_interruptible(&sn9c102_sysfs_lock))
 		return -ERESTARTSYS;
 
-	cam = video_get_drvdata(container_of(cd, struct video_device,
-					     class_dev));
+	cam = video_get_drvdata(container_of(cd, struct video_device, dev));
 	if (!cam) {
 		mutex_unlock(&sn9c102_sysfs_lock);
 		return -ENODEV;
@@ -1271,8 +1264,7 @@ sn9c102_store_i2c_val(struct device* cd, struct device_attribute *attr,
 	if (mutex_lock_interruptible(&sn9c102_sysfs_lock))
 		return -ERESTARTSYS;
 
-	cam = video_get_drvdata(container_of(cd, struct video_device,
-					     class_dev));
+	cam = video_get_drvdata(container_of(cd, struct video_device, dev));
 	if (!cam) {
 		mutex_unlock(&sn9c102_sysfs_lock);
 		return -ENODEV;
@@ -1318,8 +1310,7 @@ sn9c102_store_green(struct device* cd, struct device_attribute *attr,
 	if (mutex_lock_interruptible(&sn9c102_sysfs_lock))
 		return -ERESTARTSYS;
 
-	cam = video_get_drvdata(container_of(cd, struct video_device,
-					     class_dev));
+	cam = video_get_drvdata(container_of(cd, struct video_device, dev));
 	if (!cam) {
 		mutex_unlock(&sn9c102_sysfs_lock);
 		return -ENODEV;
@@ -1400,8 +1391,7 @@ static ssize_t sn9c102_show_frame_header(struct device* cd,
 	struct sn9c102_device* cam;
 	ssize_t count;
 
-	cam = video_get_drvdata(container_of(cd, struct video_device,
-					     class_dev));
+	cam = video_get_drvdata(container_of(cd, struct video_device, dev));
 	if (!cam)
 		return -ENODEV;
 
@@ -1428,49 +1418,49 @@ static DEVICE_ATTR(frame_header, S_IRUGO, sn9c102_show_frame_header, NULL);
 
 static int sn9c102_create_sysfs(struct sn9c102_device* cam)
 {
-	struct device *classdev = &(cam->v4ldev->class_dev);
+	struct device *dev = &(cam->v4ldev->dev);
 	int err = 0;
 
-	if ((err = device_create_file(classdev, &dev_attr_reg)))
+	if ((err = device_create_file(dev, &dev_attr_reg)))
 		goto err_out;
-	if ((err = device_create_file(classdev, &dev_attr_val)))
+	if ((err = device_create_file(dev, &dev_attr_val)))
 		goto err_reg;
-	if ((err = device_create_file(classdev, &dev_attr_frame_header)))
+	if ((err = device_create_file(dev, &dev_attr_frame_header)))
 		goto err_val;
 
 	if (cam->sensor.sysfs_ops) {
-		if ((err = device_create_file(classdev, &dev_attr_i2c_reg)))
+		if ((err = device_create_file(dev, &dev_attr_i2c_reg)))
 			goto err_frame_header;
-		if ((err = device_create_file(classdev, &dev_attr_i2c_val)))
+		if ((err = device_create_file(dev, &dev_attr_i2c_val)))
 			goto err_i2c_reg;
 	}
 
 	if (cam->bridge == BRIDGE_SN9C101 || cam->bridge == BRIDGE_SN9C102) {
-		if ((err = device_create_file(classdev, &dev_attr_green)))
+		if ((err = device_create_file(dev, &dev_attr_green)))
 			goto err_i2c_val;
 	} else {
-		if ((err = device_create_file(classdev, &dev_attr_blue)))
+		if ((err = device_create_file(dev, &dev_attr_blue)))
 			goto err_i2c_val;
-		if ((err = device_create_file(classdev, &dev_attr_red)))
+		if ((err = device_create_file(dev, &dev_attr_red)))
 			goto err_blue;
 	}
 
 	return 0;
 
 err_blue:
-	device_remove_file(classdev, &dev_attr_blue);
+	device_remove_file(dev, &dev_attr_blue);
 err_i2c_val:
 	if (cam->sensor.sysfs_ops)
-		device_remove_file(classdev, &dev_attr_i2c_val);
+		device_remove_file(dev, &dev_attr_i2c_val);
 err_i2c_reg:
 	if (cam->sensor.sysfs_ops)
-		device_remove_file(classdev, &dev_attr_i2c_reg);
+		device_remove_file(dev, &dev_attr_i2c_reg);
 err_frame_header:
-	device_remove_file(classdev, &dev_attr_frame_header);
+	device_remove_file(dev, &dev_attr_frame_header);
 err_val:
-	device_remove_file(classdev, &dev_attr_val);
+	device_remove_file(dev, &dev_attr_val);
 err_reg:
-	device_remove_file(classdev, &dev_attr_reg);
+	device_remove_file(dev, &dev_attr_reg);
 err_out:
 	return err;
 }
@@ -3319,8 +3309,6 @@ sn9c102_usb_probe(struct usb_interface* intf, const struct usb_device_id* id)
 	}
 
 	strcpy(cam->v4ldev->name, "SN9C1xx PC Camera");
-	cam->v4ldev->owner = THIS_MODULE;
-	cam->v4ldev->type = VID_TYPE_CAPTURE | VID_TYPE_SCALES;
 	cam->v4ldev->fops = &sn9c102_fops;
 	cam->v4ldev->minor = video_nr[dev_nr];
 	cam->v4ldev->release = video_device_release;
diff --git a/drivers/media/video/soc_camera.c b/drivers/media/video/soc_camera.c
index e39b98f1eca4..66ebe5956a87 100644
--- a/drivers/media/video/soc_camera.c
+++ b/drivers/media/video/soc_camera.c
@@ -25,6 +25,7 @@
 #include <linux/vmalloc.h>
 
 #include <media/v4l2-common.h>
+#include <media/v4l2-ioctl.h>
 #include <media/v4l2-dev.h>
 #include <media/videobuf-core.h>
 #include <media/soc_camera.h>
@@ -193,7 +194,7 @@ static int soc_camera_open(struct inode *inode, struct file *file)
 	mutex_lock(&video_lock);
 
 	vdev = video_devdata(file);
-	icd = container_of(vdev->dev, struct soc_camera_device, dev);
+	icd = container_of(vdev->parent, struct soc_camera_device, dev);
 	ici = to_soc_camera_host(icd->dev.parent);
 
 	if (!try_module_get(icd->ops->owner)) {
@@ -258,7 +259,7 @@ static int soc_camera_close(struct inode *inode, struct file *file)
 
 	vfree(icf);
 
-	dev_dbg(vdev->dev, "camera device close\n");
+	dev_dbg(vdev->parent, "camera device close\n");
 
 	return 0;
 }
@@ -271,7 +272,7 @@ static ssize_t soc_camera_read(struct file *file, char __user *buf,
 	struct video_device *vdev = icd->vdev;
 	int err = -EINVAL;
 
-	dev_err(vdev->dev, "camera device read not implemented\n");
+	dev_err(vdev->parent, "camera device read not implemented\n");
 
 	return err;
 }
@@ -731,10 +732,36 @@ static int soc_camera_remove(struct device *dev)
 	return 0;
 }
 
+static int soc_camera_suspend(struct device *dev, pm_message_t state)
+{
+	struct soc_camera_device *icd = to_soc_camera_dev(dev);
+	struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent);
+	int ret = 0;
+
+	if (ici->ops->suspend)
+		ret = ici->ops->suspend(icd, state);
+
+	return ret;
+}
+
+static int soc_camera_resume(struct device *dev)
+{
+	struct soc_camera_device *icd = to_soc_camera_dev(dev);
+	struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent);
+	int ret = 0;
+
+	if (ici->ops->resume)
+		ret = ici->ops->resume(icd);
+
+	return ret;
+}
+
 static struct bus_type soc_camera_bus_type = {
 	.name		= "soc-camera",
 	.probe		= soc_camera_probe,
 	.remove		= soc_camera_remove,
+	.suspend	= soc_camera_suspend,
+	.resume		= soc_camera_resume,
 };
 
 static struct device_driver ic_drv = {
@@ -861,6 +888,35 @@ void soc_camera_device_unregister(struct soc_camera_device *icd)
 }
 EXPORT_SYMBOL(soc_camera_device_unregister);
 
+static const struct v4l2_ioctl_ops soc_camera_ioctl_ops = {
+	.vidioc_querycap	 = soc_camera_querycap,
+	.vidioc_g_fmt_vid_cap    = soc_camera_g_fmt_vid_cap,
+	.vidioc_enum_fmt_vid_cap = soc_camera_enum_fmt_vid_cap,
+	.vidioc_s_fmt_vid_cap    = soc_camera_s_fmt_vid_cap,
+	.vidioc_enum_input	 = soc_camera_enum_input,
+	.vidioc_g_input		 = soc_camera_g_input,
+	.vidioc_s_input		 = soc_camera_s_input,
+	.vidioc_s_std		 = soc_camera_s_std,
+	.vidioc_reqbufs		 = soc_camera_reqbufs,
+	.vidioc_try_fmt_vid_cap  = soc_camera_try_fmt_vid_cap,
+	.vidioc_querybuf	 = soc_camera_querybuf,
+	.vidioc_qbuf		 = soc_camera_qbuf,
+	.vidioc_dqbuf		 = soc_camera_dqbuf,
+	.vidioc_streamon	 = soc_camera_streamon,
+	.vidioc_streamoff	 = soc_camera_streamoff,
+	.vidioc_queryctrl	 = soc_camera_queryctrl,
+	.vidioc_g_ctrl		 = soc_camera_g_ctrl,
+	.vidioc_s_ctrl		 = soc_camera_s_ctrl,
+	.vidioc_cropcap		 = soc_camera_cropcap,
+	.vidioc_g_crop		 = soc_camera_g_crop,
+	.vidioc_s_crop		 = soc_camera_s_crop,
+	.vidioc_g_chip_ident     = soc_camera_g_chip_ident,
+#ifdef CONFIG_VIDEO_ADV_DEBUG
+	.vidioc_g_register	 = soc_camera_g_register,
+	.vidioc_s_register	 = soc_camera_s_register,
+#endif
+};
+
 int soc_camera_video_start(struct soc_camera_device *icd)
 {
 	struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent);
@@ -877,45 +933,19 @@ int soc_camera_video_start(struct soc_camera_device *icd)
 
 	strlcpy(vdev->name, ici->drv_name, sizeof(vdev->name));
 	/* Maybe better &ici->dev */
-	vdev->dev		= &icd->dev;
-	vdev->type		= VID_TYPE_CAPTURE;
+	vdev->parent		= &icd->dev;
 	vdev->current_norm	= V4L2_STD_UNKNOWN;
 	vdev->fops		= &soc_camera_fops;
+	vdev->ioctl_ops		= &soc_camera_ioctl_ops;
 	vdev->release		= video_device_release;
 	vdev->minor		= -1;
 	vdev->tvnorms		= V4L2_STD_UNKNOWN,
-	vdev->vidioc_querycap	= soc_camera_querycap;
-	vdev->vidioc_g_fmt_vid_cap = soc_camera_g_fmt_vid_cap;
-	vdev->vidioc_enum_fmt_vid_cap = soc_camera_enum_fmt_vid_cap;
-	vdev->vidioc_s_fmt_vid_cap = soc_camera_s_fmt_vid_cap;
-	vdev->vidioc_enum_input	= soc_camera_enum_input;
-	vdev->vidioc_g_input	= soc_camera_g_input;
-	vdev->vidioc_s_input	= soc_camera_s_input;
-	vdev->vidioc_s_std	= soc_camera_s_std;
-	vdev->vidioc_reqbufs	= soc_camera_reqbufs;
-	vdev->vidioc_try_fmt_vid_cap = soc_camera_try_fmt_vid_cap;
-	vdev->vidioc_querybuf	= soc_camera_querybuf;
-	vdev->vidioc_qbuf	= soc_camera_qbuf;
-	vdev->vidioc_dqbuf	= soc_camera_dqbuf;
-	vdev->vidioc_streamon	= soc_camera_streamon;
-	vdev->vidioc_streamoff	= soc_camera_streamoff;
-	vdev->vidioc_queryctrl	= soc_camera_queryctrl;
-	vdev->vidioc_g_ctrl	= soc_camera_g_ctrl;
-	vdev->vidioc_s_ctrl	= soc_camera_s_ctrl;
-	vdev->vidioc_cropcap	= soc_camera_cropcap;
-	vdev->vidioc_g_crop	= soc_camera_g_crop;
-	vdev->vidioc_s_crop	= soc_camera_s_crop;
-	vdev->vidioc_g_chip_ident = soc_camera_g_chip_ident;
-#ifdef CONFIG_VIDEO_ADV_DEBUG
-	vdev->vidioc_g_register	= soc_camera_g_register;
-	vdev->vidioc_s_register	= soc_camera_s_register;
-#endif
 
 	icd->current_fmt = &icd->formats[0];
 
 	err = video_register_device(vdev, VFL_TYPE_GRABBER, vdev->minor);
 	if (err < 0) {
-		dev_err(vdev->dev, "video_register_device failed\n");
+		dev_err(vdev->parent, "video_register_device failed\n");
 		goto evidregd;
 	}
 	icd->vdev = vdev;
diff --git a/drivers/media/video/soc_camera_platform.c b/drivers/media/video/soc_camera_platform.c
index eefb0327ebb6..1adc257ebdb9 100644
--- a/drivers/media/video/soc_camera_platform.c
+++ b/drivers/media/video/soc_camera_platform.c
@@ -187,7 +187,7 @@ static int __init soc_camera_platform_module_init(void)
 
 static void __exit soc_camera_platform_module_exit(void)
 {
-	return platform_driver_unregister(&soc_camera_platform_driver);
+	platform_driver_unregister(&soc_camera_platform_driver);
 }
 
 module_init(soc_camera_platform_module_init);
diff --git a/drivers/media/video/stk-webcam.c b/drivers/media/video/stk-webcam.c
index f308c38d744f..ad36af30e099 100644
--- a/drivers/media/video/stk-webcam.c
+++ b/drivers/media/video/stk-webcam.c
@@ -34,6 +34,7 @@
 #include <linux/vmalloc.h>
 #include <linux/videodev2.h>
 #include <media/v4l2-common.h>
+#include <media/v4l2-ioctl.h>
 
 #include "stk-webcam.h"
 
@@ -340,17 +341,19 @@ static int stk_create_sysfs_files(struct video_device *vdev)
 {
 	int ret;
 
-	ret = video_device_create_file(vdev, &dev_attr_brightness);
-	ret += video_device_create_file(vdev, &dev_attr_hflip);
-	ret += video_device_create_file(vdev, &dev_attr_vflip);
+	ret = device_create_file(&vdev->dev, &dev_attr_brightness);
+	ret += device_create_file(&vdev->dev, &dev_attr_hflip);
+	ret += device_create_file(&vdev->dev, &dev_attr_vflip);
+	if (ret)
+		STK_WARNING("Could not create sysfs files\n");
 	return ret;
 }
 
 static void stk_remove_sysfs_files(struct video_device *vdev)
 {
-	video_device_remove_file(vdev, &dev_attr_brightness);
-	video_device_remove_file(vdev, &dev_attr_hflip);
-	video_device_remove_file(vdev, &dev_attr_vflip);
+	device_remove_file(&vdev->dev, &dev_attr_brightness);
+	device_remove_file(&vdev->dev, &dev_attr_hflip);
+	device_remove_file(&vdev->dev, &dev_attr_vflip);
 }
 
 #else
@@ -442,18 +445,19 @@ static void stk_isoc_handler(struct urb *urb)
 				fb->v4lbuf.bytesused = 0;
 				fill = fb->buffer;
 			} else if (fb->v4lbuf.bytesused == dev->frame_size) {
-				list_move_tail(dev->sio_avail.next,
-					&dev->sio_full);
-				wake_up(&dev->wait_frame);
-				if (list_empty(&dev->sio_avail)) {
-					(void) (printk_ratelimit() &&
-					STK_ERROR("No buffer available\n"));
-					goto resubmit;
+				if (list_is_singular(&dev->sio_avail)) {
+					/* Always reuse the last buffer */
+					fb->v4lbuf.bytesused = 0;
+					fill = fb->buffer;
+				} else {
+					list_move_tail(dev->sio_avail.next,
+						&dev->sio_full);
+					wake_up(&dev->wait_frame);
+					fb = list_first_entry(&dev->sio_avail,
+						struct stk_sio_buffer, list);
+					fb->v4lbuf.bytesused = 0;
+					fill = fb->buffer;
 				}
-				fb = list_first_entry(&dev->sio_avail,
-					struct stk_sio_buffer, list);
-				fb->v4lbuf.bytesused = 0;
-				fill = fb->buffer;
 			}
 		} else {
 			framelen -= 4;
@@ -1327,20 +1331,7 @@ static struct file_operations v4l_stk_fops = {
 	.llseek = no_llseek
 };
 
-static void stk_v4l_dev_release(struct video_device *vd)
-{
-}
-
-static struct video_device stk_v4l_data = {
-	.name = "stkwebcam",
-	.type = VFL_TYPE_GRABBER,
-	.type2 = VID_TYPE_CAPTURE,
-	.minor = -1,
-	.tvnorms = V4L2_STD_UNKNOWN,
-	.current_norm = V4L2_STD_UNKNOWN,
-	.fops = &v4l_stk_fops,
-	.release = stk_v4l_dev_release,
-
+static const struct v4l2_ioctl_ops v4l_stk_ioctl_ops = {
 	.vidioc_querycap = stk_vidioc_querycap,
 	.vidioc_enum_fmt_vid_cap = stk_vidioc_enum_fmt_vid_cap,
 	.vidioc_try_fmt_vid_cap = stk_vidioc_try_fmt_vid_cap,
@@ -1362,6 +1353,20 @@ static struct video_device stk_v4l_data = {
 	.vidioc_g_parm = stk_vidioc_g_parm,
 };
 
+static void stk_v4l_dev_release(struct video_device *vd)
+{
+}
+
+static struct video_device stk_v4l_data = {
+	.name = "stkwebcam",
+	.minor = -1,
+	.tvnorms = V4L2_STD_UNKNOWN,
+	.current_norm = V4L2_STD_UNKNOWN,
+	.fops = &v4l_stk_fops,
+	.ioctl_ops = &v4l_stk_ioctl_ops,
+	.release = stk_v4l_dev_release,
+};
+
 
 static int stk_register_video_device(struct stk_camera *dev)
 {
@@ -1369,7 +1374,7 @@ static int stk_register_video_device(struct stk_camera *dev)
 
 	dev->vdev = stk_v4l_data;
 	dev->vdev.debug = debug;
-	dev->vdev.dev = &dev->interface->dev;
+	dev->vdev.parent = &dev->interface->dev;
 	dev->vdev.priv = dev;
 	err = video_register_device(&dev->vdev, VFL_TYPE_GRABBER, -1);
 	if (err)
diff --git a/drivers/media/video/stradis.c b/drivers/media/video/stradis.c
index c109511f21ea..276bded06ab3 100644
--- a/drivers/media/video/stradis.c
+++ b/drivers/media/video/stradis.c
@@ -43,6 +43,7 @@
 #include <linux/vmalloc.h>
 #include <linux/videodev.h>
 #include <media/v4l2-common.h>
+#include <media/v4l2-ioctl.h>
 
 #include "saa7146.h"
 #include "saa7146reg.h"
@@ -1918,7 +1919,6 @@ static const struct file_operations saa_fops = {
 /* template for video_device-structure */
 static struct video_device saa_template = {
 	.name = "SAA7146A",
-	.type = VID_TYPE_CAPTURE | VID_TYPE_OVERLAY,
 	.fops = &saa_fops,
 	.minor = -1,
 };
diff --git a/drivers/media/video/stv680.c b/drivers/media/video/stv680.c
index d7f130bedb5f..56dc3d6b5b29 100644
--- a/drivers/media/video/stv680.c
+++ b/drivers/media/video/stv680.c
@@ -66,6 +66,7 @@
 #include <linux/errno.h>
 #include <linux/videodev.h>
 #include <media/v4l2-common.h>
+#include <media/v4l2-ioctl.h>
 #include <linux/usb.h>
 #include <linux/mutex.h>
 
@@ -524,53 +525,54 @@ static int stv680_create_sysfs_files(struct video_device *vdev)
 {
 	int rc;
 
-	rc = video_device_create_file(vdev, &dev_attr_model);
+	rc = device_create_file(&vdev->dev, &dev_attr_model);
 	if (rc) goto err;
-	rc = video_device_create_file(vdev, &dev_attr_in_use);
+	rc = device_create_file(&vdev->dev, &dev_attr_in_use);
 	if (rc) goto err_model;
-	rc = video_device_create_file(vdev, &dev_attr_streaming);
+	rc = device_create_file(&vdev->dev, &dev_attr_streaming);
 	if (rc) goto err_inuse;
-	rc = video_device_create_file(vdev, &dev_attr_palette);
+	rc = device_create_file(&vdev->dev, &dev_attr_palette);
 	if (rc) goto err_stream;
-	rc = video_device_create_file(vdev, &dev_attr_frames_total);
+	rc = device_create_file(&vdev->dev, &dev_attr_frames_total);
 	if (rc) goto err_pal;
-	rc = video_device_create_file(vdev, &dev_attr_frames_read);
+	rc = device_create_file(&vdev->dev, &dev_attr_frames_read);
 	if (rc) goto err_framtot;
-	rc = video_device_create_file(vdev, &dev_attr_packets_dropped);
+	rc = device_create_file(&vdev->dev, &dev_attr_packets_dropped);
 	if (rc) goto err_framread;
-	rc = video_device_create_file(vdev, &dev_attr_decoding_errors);
+	rc = device_create_file(&vdev->dev, &dev_attr_decoding_errors);
 	if (rc) goto err_dropped;
 
 	return 0;
 
 err_dropped:
-	video_device_remove_file(vdev, &dev_attr_packets_dropped);
+	device_remove_file(&vdev->dev, &dev_attr_packets_dropped);
 err_framread:
-	video_device_remove_file(vdev, &dev_attr_frames_read);
+	device_remove_file(&vdev->dev, &dev_attr_frames_read);
 err_framtot:
-	video_device_remove_file(vdev, &dev_attr_frames_total);
+	device_remove_file(&vdev->dev, &dev_attr_frames_total);
 err_pal:
-	video_device_remove_file(vdev, &dev_attr_palette);
+	device_remove_file(&vdev->dev, &dev_attr_palette);
 err_stream:
-	video_device_remove_file(vdev, &dev_attr_streaming);
+	device_remove_file(&vdev->dev, &dev_attr_streaming);
 err_inuse:
-	video_device_remove_file(vdev, &dev_attr_in_use);
+	device_remove_file(&vdev->dev, &dev_attr_in_use);
 err_model:
-	video_device_remove_file(vdev, &dev_attr_model);
+	device_remove_file(&vdev->dev, &dev_attr_model);
 err:
+	PDEBUG(0, "STV(e): Could not create sysfs files");
 	return rc;
 }
 
 static void stv680_remove_sysfs_files(struct video_device *vdev)
 {
-	video_device_remove_file(vdev, &dev_attr_model);
-	video_device_remove_file(vdev, &dev_attr_in_use);
-	video_device_remove_file(vdev, &dev_attr_streaming);
-	video_device_remove_file(vdev, &dev_attr_palette);
-	video_device_remove_file(vdev, &dev_attr_frames_total);
-	video_device_remove_file(vdev, &dev_attr_frames_read);
-	video_device_remove_file(vdev, &dev_attr_packets_dropped);
-	video_device_remove_file(vdev, &dev_attr_decoding_errors);
+	device_remove_file(&vdev->dev, &dev_attr_model);
+	device_remove_file(&vdev->dev, &dev_attr_in_use);
+	device_remove_file(&vdev->dev, &dev_attr_streaming);
+	device_remove_file(&vdev->dev, &dev_attr_palette);
+	device_remove_file(&vdev->dev, &dev_attr_frames_total);
+	device_remove_file(&vdev->dev, &dev_attr_frames_read);
+	device_remove_file(&vdev->dev, &dev_attr_packets_dropped);
+	device_remove_file(&vdev->dev, &dev_attr_decoding_errors);
 }
 
 /********************************************************************
@@ -1400,9 +1402,7 @@ static const struct file_operations stv680_fops = {
 	.llseek =       no_llseek,
 };
 static struct video_device stv680_template = {
-	.owner =	THIS_MODULE,
 	.name =		"STV0680 USB camera",
-	.type =		VID_TYPE_CAPTURE,
 	.fops =         &stv680_fops,
 	.release =	video_device_release,
 	.minor = 	-1,
@@ -1454,7 +1454,7 @@ static int stv680_probe (struct usb_interface *intf, const struct usb_device_id
 		goto error;
 	}
 	memcpy(stv680->vdev, &stv680_template, sizeof(stv680_template));
-	stv680->vdev->dev = &intf->dev;
+	stv680->vdev->parent = &intf->dev;
 	video_set_drvdata(stv680->vdev, stv680);
 
 	memcpy (stv680->vdev->name, stv680->camera_name, strlen (stv680->camera_name));
diff --git a/drivers/media/video/tda7432.c b/drivers/media/video/tda7432.c
index ae75c187da79..4963d4264880 100644
--- a/drivers/media/video/tda7432.c
+++ b/drivers/media/video/tda7432.c
@@ -44,10 +44,11 @@
 #include <linux/delay.h>
 #include <linux/errno.h>
 #include <linux/slab.h>
-#include <linux/videodev.h>
+#include <linux/videodev2.h>
 #include <linux/i2c.h>
 
 #include <media/v4l2-common.h>
+#include <media/v4l2-ioctl.h>
 #include <media/i2c-addr.h>
 
 #ifndef VIDEO_AUDIO_BALANCE
diff --git a/drivers/media/video/tda9875.c b/drivers/media/video/tda9875.c
index 7a8ce8fb46dc..792f0b079909 100644
--- a/drivers/media/video/tda9875.c
+++ b/drivers/media/video/tda9875.c
@@ -25,7 +25,7 @@
 #include <linux/delay.h>
 #include <linux/errno.h>
 #include <linux/slab.h>
-#include <linux/videodev.h>
+#include <linux/videodev2.h>
 #include <media/v4l2-common.h>
 #include <linux/i2c.h>
 #include <linux/init.h>
diff --git a/drivers/media/video/tlv320aic23b.c b/drivers/media/video/tlv320aic23b.c
index 9220378a5637..281065b9dd2d 100644
--- a/drivers/media/video/tlv320aic23b.c
+++ b/drivers/media/video/tlv320aic23b.c
@@ -29,7 +29,7 @@
 #include <asm/uaccess.h>
 #include <linux/i2c.h>
 #include <linux/i2c-id.h>
-#include <linux/videodev.h>
+#include <linux/videodev2.h>
 #include <media/v4l2-common.h>
 #include <media/v4l2-i2c-drv-legacy.h>
 
diff --git a/drivers/media/video/tuner-core.c b/drivers/media/video/tuner-core.c
index 93d879dc510f..d806a3556eed 100644
--- a/drivers/media/video/tuner-core.c
+++ b/drivers/media/video/tuner-core.c
@@ -19,6 +19,7 @@
 #include <media/tuner.h>
 #include <media/tuner-types.h>
 #include <media/v4l2-common.h>
+#include <media/v4l2-ioctl.h>
 #include <media/v4l2-i2c-drv-legacy.h>
 #include "mt20xx.h"
 #include "tda8290.h"
diff --git a/drivers/media/video/tveeprom.c b/drivers/media/video/tveeprom.c
index 9da0e1807ffb..bcc32fa92a81 100644
--- a/drivers/media/video/tveeprom.c
+++ b/drivers/media/video/tveeprom.c
@@ -34,13 +34,13 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/types.h>
-#include <linux/videodev.h>
+#include <linux/videodev2.h>
 #include <linux/i2c.h>
 
 #include <media/tuner.h>
 #include <media/tveeprom.h>
 #include <media/v4l2-common.h>
-#include <media/audiochip.h>
+#include <media/v4l2-chip-ident.h>
 
 MODULE_DESCRIPTION("i2c Hauppauge eeprom decoder driver");
 MODULE_AUTHOR("John Klar");
@@ -261,70 +261,72 @@ hauppauge_tuner[] =
 	{ TUNER_ABSENT,        		"MaxLinear MXL5005_v2"},
 	{ TUNER_PHILIPS_TDA8290, 	"Philips 18271_8295"},
 	/* 150-159 */
-	{ TUNER_ABSENT,        "Xceive XC5000"},
+	{ TUNER_ABSENT,                 "Xceive XC5000"},
 };
 
+/* Use V4L2_IDENT_AMBIGUOUS for those audio 'chips' that are
+ * internal to a video chip, i.e. not a separate audio chip. */
 static struct HAUPPAUGE_AUDIOIC
 {
-	enum audiochip  id;
+	u32   id;
 	char *name;
 }
 audioIC[] =
 {
 	/* 0-4 */
-	{AUDIO_CHIP_NONE,     "None"},
-	{AUDIO_CHIP_TEA6300,  "TEA6300"},
-	{AUDIO_CHIP_TEA6300,  "TEA6320"},
-	{AUDIO_CHIP_TDA985X,  "TDA9850"},
-	{AUDIO_CHIP_MSP34XX,  "MSP3400C"},
+	{ V4L2_IDENT_NONE,      "None"      },
+	{ V4L2_IDENT_UNKNOWN,   "TEA6300"   },
+	{ V4L2_IDENT_UNKNOWN,   "TEA6320"   },
+	{ V4L2_IDENT_UNKNOWN,   "TDA9850"   },
+	{ V4L2_IDENT_MSPX4XX,   "MSP3400C"  },
 	/* 5-9 */
-	{AUDIO_CHIP_MSP34XX,  "MSP3410D"},
-	{AUDIO_CHIP_MSP34XX,  "MSP3415"},
-	{AUDIO_CHIP_MSP34XX,  "MSP3430"},
-	{AUDIO_CHIP_MSP34XX,  "MSP3438"},
-	{AUDIO_CHIP_UNKNOWN,  "CS5331"},
+	{ V4L2_IDENT_MSPX4XX,   "MSP3410D"  },
+	{ V4L2_IDENT_MSPX4XX,   "MSP3415"   },
+	{ V4L2_IDENT_MSPX4XX,   "MSP3430"   },
+	{ V4L2_IDENT_MSPX4XX,   "MSP3438"   },
+	{ V4L2_IDENT_UNKNOWN,   "CS5331"    },
 	/* 10-14 */
-	{AUDIO_CHIP_MSP34XX,  "MSP3435"},
-	{AUDIO_CHIP_MSP34XX,  "MSP3440"},
-	{AUDIO_CHIP_MSP34XX,  "MSP3445"},
-	{AUDIO_CHIP_MSP34XX,  "MSP3411"},
-	{AUDIO_CHIP_MSP34XX,  "MSP3416"},
+	{ V4L2_IDENT_MSPX4XX,   "MSP3435"   },
+	{ V4L2_IDENT_MSPX4XX,   "MSP3440"   },
+	{ V4L2_IDENT_MSPX4XX,   "MSP3445"   },
+	{ V4L2_IDENT_MSPX4XX,   "MSP3411"   },
+	{ V4L2_IDENT_MSPX4XX,   "MSP3416"   },
 	/* 15-19 */
-	{AUDIO_CHIP_MSP34XX,  "MSP3425"},
-	{AUDIO_CHIP_MSP34XX,  "MSP3451"},
-	{AUDIO_CHIP_MSP34XX,  "MSP3418"},
-	{AUDIO_CHIP_UNKNOWN,  "Type 0x12"},
-	{AUDIO_CHIP_UNKNOWN,  "OKI7716"},
+	{ V4L2_IDENT_MSPX4XX,   "MSP3425"   },
+	{ V4L2_IDENT_MSPX4XX,   "MSP3451"   },
+	{ V4L2_IDENT_MSPX4XX,   "MSP3418"   },
+	{ V4L2_IDENT_UNKNOWN,   "Type 0x12" },
+	{ V4L2_IDENT_UNKNOWN,   "OKI7716"   },
 	/* 20-24 */
-	{AUDIO_CHIP_MSP34XX,  "MSP4410"},
-	{AUDIO_CHIP_MSP34XX,  "MSP4420"},
-	{AUDIO_CHIP_MSP34XX,  "MSP4440"},
-	{AUDIO_CHIP_MSP34XX,  "MSP4450"},
-	{AUDIO_CHIP_MSP34XX,  "MSP4408"},
+	{ V4L2_IDENT_MSPX4XX,   "MSP4410"   },
+	{ V4L2_IDENT_MSPX4XX,   "MSP4420"   },
+	{ V4L2_IDENT_MSPX4XX,   "MSP4440"   },
+	{ V4L2_IDENT_MSPX4XX,   "MSP4450"   },
+	{ V4L2_IDENT_MSPX4XX,   "MSP4408"   },
 	/* 25-29 */
-	{AUDIO_CHIP_MSP34XX,  "MSP4418"},
-	{AUDIO_CHIP_MSP34XX,  "MSP4428"},
-	{AUDIO_CHIP_MSP34XX,  "MSP4448"},
-	{AUDIO_CHIP_MSP34XX,  "MSP4458"},
-	{AUDIO_CHIP_MSP34XX,  "Type 0x1d"},
+	{ V4L2_IDENT_MSPX4XX,   "MSP4418"   },
+	{ V4L2_IDENT_MSPX4XX,   "MSP4428"   },
+	{ V4L2_IDENT_MSPX4XX,   "MSP4448"   },
+	{ V4L2_IDENT_MSPX4XX,   "MSP4458"   },
+	{ V4L2_IDENT_MSPX4XX,   "Type 0x1d" },
 	/* 30-34 */
-	{AUDIO_CHIP_INTERNAL, "CX880"},
-	{AUDIO_CHIP_INTERNAL, "CX881"},
-	{AUDIO_CHIP_INTERNAL, "CX883"},
-	{AUDIO_CHIP_INTERNAL, "CX882"},
-	{AUDIO_CHIP_INTERNAL, "CX25840"},
+	{ V4L2_IDENT_AMBIGUOUS, "CX880"     },
+	{ V4L2_IDENT_AMBIGUOUS, "CX881"     },
+	{ V4L2_IDENT_AMBIGUOUS, "CX883"     },
+	{ V4L2_IDENT_AMBIGUOUS, "CX882"     },
+	{ V4L2_IDENT_AMBIGUOUS, "CX25840"   },
 	/* 35-39 */
-	{AUDIO_CHIP_INTERNAL, "CX25841"},
-	{AUDIO_CHIP_INTERNAL, "CX25842"},
-	{AUDIO_CHIP_INTERNAL, "CX25843"},
-	{AUDIO_CHIP_INTERNAL, "CX23418"},
-	{AUDIO_CHIP_INTERNAL, "CX23885"},
+	{ V4L2_IDENT_AMBIGUOUS, "CX25841"   },
+	{ V4L2_IDENT_AMBIGUOUS, "CX25842"   },
+	{ V4L2_IDENT_AMBIGUOUS, "CX25843"   },
+	{ V4L2_IDENT_AMBIGUOUS, "CX23418"   },
+	{ V4L2_IDENT_AMBIGUOUS, "CX23885"   },
 	/* 40-44 */
-	{AUDIO_CHIP_INTERNAL, "CX23888"},
-	{AUDIO_CHIP_INTERNAL, "SAA7131"},
-	{AUDIO_CHIP_INTERNAL, "CX23887"},
-	{AUDIO_CHIP_INTERNAL, "SAA7164"},
-	{AUDIO_CHIP_INTERNAL, "AU8522"},
+	{ V4L2_IDENT_AMBIGUOUS, "CX23888"   },
+	{ V4L2_IDENT_AMBIGUOUS, "SAA7131"   },
+	{ V4L2_IDENT_AMBIGUOUS, "CX23887"   },
+	{ V4L2_IDENT_AMBIGUOUS, "SAA7164"   },
+	{ V4L2_IDENT_AMBIGUOUS, "AU8522"    },
 };
 
 /* This list is supplied by Hauppauge. Thanks! */
@@ -483,7 +485,7 @@ void tveeprom_hauppauge_analog(struct i2c_client *c, struct tveeprom *tvee,
 			tvee->has_radio = eeprom_data[i+len-1];
 			/* old style tag, don't know how to detect
 			IR presence, mark as unknown. */
-			tvee->has_ir = -1;
+			tvee->has_ir = 0;
 			tvee->model =
 				eeprom_data[i+8] +
 				(eeprom_data[i+9] << 8);
@@ -509,7 +511,7 @@ void tveeprom_hauppauge_analog(struct i2c_client *c, struct tveeprom *tvee,
 			if (audioic < ARRAY_SIZE(audioIC))
 				tvee->audio_processor = audioIC[audioic].id;
 			else
-				tvee->audio_processor = AUDIO_CHIP_UNKNOWN;
+				tvee->audio_processor = V4L2_IDENT_UNKNOWN;
 			break;
 
 		/* case 0x03: tag 'EEInfo' */
@@ -542,7 +544,7 @@ void tveeprom_hauppauge_analog(struct i2c_client *c, struct tveeprom *tvee,
 			if (audioic < ARRAY_SIZE(audioIC))
 				tvee->audio_processor = audioIC[audioic].id;
 			else
-				tvee->audio_processor = AUDIO_CHIP_UNKNOWN;
+				tvee->audio_processor = V4L2_IDENT_UNKNOWN;
 
 			break;
 
@@ -603,7 +605,7 @@ void tveeprom_hauppauge_analog(struct i2c_client *c, struct tveeprom *tvee,
 
 		case 0x0f:
 			/* tag 'IRInfo' */
-			tvee->has_ir = eeprom_data[i+1];
+			tvee->has_ir = 1 | (eeprom_data[i+1] << 1);
 			break;
 
 		/* case 0x10: tag 'VBIInfo' */
@@ -690,7 +692,7 @@ void tveeprom_hauppauge_analog(struct i2c_client *c, struct tveeprom *tvee,
 			t_fmt_name2[6], t_fmt_name2[7], t_format2);
 	if (audioic < 0) {
 		tveeprom_info("audio processor is unknown (no idx)\n");
-		tvee->audio_processor = AUDIO_CHIP_UNKNOWN;
+		tvee->audio_processor = V4L2_IDENT_UNKNOWN;
 	} else {
 		if (audioic < ARRAY_SIZE(audioIC))
 			tveeprom_info("audio processor is %s (idx %d)\n",
@@ -703,14 +705,14 @@ void tveeprom_hauppauge_analog(struct i2c_client *c, struct tveeprom *tvee,
 		tveeprom_info("decoder processor is %s (idx %d)\n",
 			STRM(decoderIC, tvee->decoder_processor),
 			tvee->decoder_processor);
-	if (tvee->has_ir == -1)
-		tveeprom_info("has %sradio\n",
-				tvee->has_radio ? "" : "no ");
-	else
+	if (tvee->has_ir)
 		tveeprom_info("has %sradio, has %sIR receiver, has %sIR transmitter\n",
 				tvee->has_radio ? "" : "no ",
-				(tvee->has_ir & 1) ? "" : "no ",
-				(tvee->has_ir & 2) ? "" : "no ");
+				(tvee->has_ir & 2) ? "" : "no ",
+				(tvee->has_ir & 4) ? "" : "no ");
+	else
+		tveeprom_info("has %sradio\n",
+				tvee->has_radio ? "" : "no ");
 }
 EXPORT_SYMBOL(tveeprom_hauppauge_analog);
 
diff --git a/drivers/media/video/tvp5150.c b/drivers/media/video/tvp5150.c
index 6a3af1005f03..28af5ce5560d 100644
--- a/drivers/media/video/tvp5150.c
+++ b/drivers/media/video/tvp5150.c
@@ -6,7 +6,7 @@
  */
 
 #include <linux/i2c.h>
-#include <linux/videodev.h>
+#include <linux/videodev2.h>
 #include <linux/delay.h>
 #include <linux/video_decoder.h>
 #include <media/v4l2-common.h>
diff --git a/drivers/media/video/usbvideo/usbvideo.c b/drivers/media/video/usbvideo/usbvideo.c
index 4128ee20b64e..bf1bc2f69b02 100644
--- a/drivers/media/video/usbvideo/usbvideo.c
+++ b/drivers/media/video/usbvideo/usbvideo.c
@@ -952,8 +952,6 @@ static const struct file_operations usbvideo_fops = {
 	.llseek = no_llseek,
 };
 static const struct video_device usbvideo_template = {
-	.owner =      THIS_MODULE,
-	.type =       VID_TYPE_CAPTURE,
 	.fops =       &usbvideo_fops,
 };
 
@@ -1040,7 +1038,7 @@ int usbvideo_RegisterVideoDevice(struct uvd *uvd)
 		err("%s: uvd->dev == NULL", __func__);
 		return -EINVAL;
 	}
-	uvd->vdev.dev = &uvd->dev->dev;
+	uvd->vdev.parent = &uvd->dev->dev;
 	if (video_register_device(&uvd->vdev, VFL_TYPE_GRABBER, video_nr) == -1) {
 		err("%s: video_register_device failed", __func__);
 		return -EPIPE;
diff --git a/drivers/media/video/usbvideo/usbvideo.h b/drivers/media/video/usbvideo/usbvideo.h
index 051775d4c726..c66985beb8c9 100644
--- a/drivers/media/video/usbvideo/usbvideo.h
+++ b/drivers/media/video/usbvideo/usbvideo.h
@@ -18,6 +18,7 @@
 
 #include <linux/videodev.h>
 #include <media/v4l2-common.h>
+#include <media/v4l2-ioctl.h>
 #include <linux/usb.h>
 #include <linux/mutex.h>
 
diff --git a/drivers/media/video/usbvideo/vicam.c b/drivers/media/video/usbvideo/vicam.c
index 40d053e0d5bf..b7792451a299 100644
--- a/drivers/media/video/usbvideo/vicam.c
+++ b/drivers/media/video/usbvideo/vicam.c
@@ -41,6 +41,7 @@
 #include <linux/videodev.h>
 #include <linux/usb.h>
 #include <linux/vmalloc.h>
+#include <linux/mm.h>
 #include <linux/slab.h>
 #include <linux/mutex.h>
 #include <linux/firmware.h>
@@ -791,9 +792,7 @@ static const struct file_operations vicam_fops = {
 };
 
 static struct video_device vicam_template = {
-	.owner 		= THIS_MODULE,
 	.name 		= "ViCam-based USB Camera",
-	.type 		= VID_TYPE_CAPTURE,
 	.fops 		= &vicam_fops,
 	.minor 		= -1,
 };
diff --git a/drivers/media/video/usbvision/usbvision-core.c b/drivers/media/video/usbvision/usbvision-core.c
index abf685464b7c..c317ed7a8482 100644
--- a/drivers/media/video/usbvision/usbvision-core.c
+++ b/drivers/media/video/usbvision/usbvision-core.c
@@ -30,7 +30,6 @@
 #include <linux/mm.h>
 #include <linux/utsname.h>
 #include <linux/highmem.h>
-#include <linux/videodev.h>
 #include <linux/vmalloc.h>
 #include <linux/module.h>
 #include <linux/init.h>
@@ -43,7 +42,6 @@
 #include <media/saa7115.h>
 #include <media/v4l2-common.h>
 #include <media/tuner.h>
-#include <media/audiochip.h>
 
 #include <linux/workqueue.h>
 
diff --git a/drivers/media/video/usbvision/usbvision-video.c b/drivers/media/video/usbvision/usbvision-video.c
index cd6c41d67899..b977116a0dd9 100644
--- a/drivers/media/video/usbvision/usbvision-video.c
+++ b/drivers/media/video/usbvision/usbvision-video.c
@@ -53,7 +53,6 @@
 #include <linux/mm.h>
 #include <linux/utsname.h>
 #include <linux/highmem.h>
-#include <linux/videodev.h>
 #include <linux/vmalloc.h>
 #include <linux/module.h>
 #include <linux/init.h>
@@ -65,8 +64,8 @@
 
 #include <media/saa7115.h>
 #include <media/v4l2-common.h>
+#include <media/v4l2-ioctl.h>
 #include <media/tuner.h>
-#include <media/audiochip.h>
 
 #include <linux/workqueue.h>
 
@@ -184,7 +183,7 @@ MODULE_ALIAS(DRIVER_ALIAS);
 static inline struct usb_usbvision *cd_to_usbvision(struct device *cd)
 {
 	struct video_device *vdev =
-		container_of(cd, struct video_device, class_dev);
+		container_of(cd, struct video_device, dev);
 	return video_get_drvdata(vdev);
 }
 
@@ -199,7 +198,7 @@ static ssize_t show_model(struct device *cd,
 			  struct device_attribute *attr, char *buf)
 {
 	struct video_device *vdev =
-		container_of(cd, struct video_device, class_dev);
+		container_of(cd, struct video_device, dev);
 	struct usb_usbvision *usbvision = video_get_drvdata(vdev);
 	return sprintf(buf, "%s\n",
 		       usbvision_device_data[usbvision->DevModel].ModelString);
@@ -210,7 +209,7 @@ static ssize_t show_hue(struct device *cd,
 			struct device_attribute *attr, char *buf)
 {
 	struct video_device *vdev =
-		container_of(cd, struct video_device, class_dev);
+		container_of(cd, struct video_device, dev);
 	struct usb_usbvision *usbvision = video_get_drvdata(vdev);
 	struct v4l2_control ctrl;
 	ctrl.id = V4L2_CID_HUE;
@@ -225,7 +224,7 @@ static ssize_t show_contrast(struct device *cd,
 			     struct device_attribute *attr, char *buf)
 {
 	struct video_device *vdev =
-		container_of(cd, struct video_device, class_dev);
+		container_of(cd, struct video_device, dev);
 	struct usb_usbvision *usbvision = video_get_drvdata(vdev);
 	struct v4l2_control ctrl;
 	ctrl.id = V4L2_CID_CONTRAST;
@@ -240,7 +239,7 @@ static ssize_t show_brightness(struct device *cd,
 			       struct device_attribute *attr, char *buf)
 {
 	struct video_device *vdev =
-		container_of(cd, struct video_device, class_dev);
+		container_of(cd, struct video_device, dev);
 	struct usb_usbvision *usbvision = video_get_drvdata(vdev);
 	struct v4l2_control ctrl;
 	ctrl.id = V4L2_CID_BRIGHTNESS;
@@ -255,7 +254,7 @@ static ssize_t show_saturation(struct device *cd,
 			       struct device_attribute *attr, char *buf)
 {
 	struct video_device *vdev =
-		container_of(cd, struct video_device, class_dev);
+		container_of(cd, struct video_device, dev);
 	struct usb_usbvision *usbvision = video_get_drvdata(vdev);
 	struct v4l2_control ctrl;
 	ctrl.id = V4L2_CID_SATURATION;
@@ -270,7 +269,7 @@ static ssize_t show_streaming(struct device *cd,
 			      struct device_attribute *attr, char *buf)
 {
 	struct video_device *vdev =
-		container_of(cd, struct video_device, class_dev);
+		container_of(cd, struct video_device, dev);
 	struct usb_usbvision *usbvision = video_get_drvdata(vdev);
 	return sprintf(buf, "%s\n",
 		       YES_NO(usbvision->streaming==Stream_On?1:0));
@@ -281,7 +280,7 @@ static ssize_t show_compression(struct device *cd,
 				struct device_attribute *attr, char *buf)
 {
 	struct video_device *vdev =
-		container_of(cd, struct video_device, class_dev);
+		container_of(cd, struct video_device, dev);
 	struct usb_usbvision *usbvision = video_get_drvdata(vdev);
 	return sprintf(buf, "%s\n",
 		       YES_NO(usbvision->isocMode==ISOC_MODE_COMPRESS));
@@ -292,7 +291,7 @@ static ssize_t show_device_bridge(struct device *cd,
 				  struct device_attribute *attr, char *buf)
 {
 	struct video_device *vdev =
-		container_of(cd, struct video_device, class_dev);
+		container_of(cd, struct video_device, dev);
 	struct usb_usbvision *usbvision = video_get_drvdata(vdev);
 	return sprintf(buf, "%d\n", usbvision->bridgeType);
 }
@@ -304,40 +303,31 @@ static void usbvision_create_sysfs(struct video_device *vdev)
 	if (!vdev)
 		return;
 	do {
-		res = device_create_file(&vdev->class_dev,
-					 &dev_attr_version);
+		res = device_create_file(&vdev->dev, &dev_attr_version);
 		if (res<0)
 			break;
-		res = device_create_file(&vdev->class_dev,
-					 &dev_attr_model);
+		res = device_create_file(&vdev->dev, &dev_attr_model);
 		if (res<0)
 			break;
-		res = device_create_file(&vdev->class_dev,
-					 &dev_attr_hue);
+		res = device_create_file(&vdev->dev, &dev_attr_hue);
 		if (res<0)
 			break;
-		res = device_create_file(&vdev->class_dev,
-					 &dev_attr_contrast);
+		res = device_create_file(&vdev->dev, &dev_attr_contrast);
 		if (res<0)
 			break;
-		res = device_create_file(&vdev->class_dev,
-					 &dev_attr_brightness);
+		res = device_create_file(&vdev->dev, &dev_attr_brightness);
 		if (res<0)
 			break;
-		res = device_create_file(&vdev->class_dev,
-					 &dev_attr_saturation);
+		res = device_create_file(&vdev->dev, &dev_attr_saturation);
 		if (res<0)
 			break;
-		res = device_create_file(&vdev->class_dev,
-					 &dev_attr_streaming);
+		res = device_create_file(&vdev->dev, &dev_attr_streaming);
 		if (res<0)
 			break;
-		res = device_create_file(&vdev->class_dev,
-					 &dev_attr_compression);
+		res = device_create_file(&vdev->dev, &dev_attr_compression);
 		if (res<0)
 			break;
-		res = device_create_file(&vdev->class_dev,
-					 &dev_attr_bridge);
+		res = device_create_file(&vdev->dev, &dev_attr_bridge);
 		if (res>=0)
 			return;
 	} while (0);
@@ -348,24 +338,15 @@ static void usbvision_create_sysfs(struct video_device *vdev)
 static void usbvision_remove_sysfs(struct video_device *vdev)
 {
 	if (vdev) {
-		device_remove_file(&vdev->class_dev,
-					 &dev_attr_version);
-		device_remove_file(&vdev->class_dev,
-					 &dev_attr_model);
-		device_remove_file(&vdev->class_dev,
-					 &dev_attr_hue);
-		device_remove_file(&vdev->class_dev,
-					 &dev_attr_contrast);
-		device_remove_file(&vdev->class_dev,
-					 &dev_attr_brightness);
-		device_remove_file(&vdev->class_dev,
-					 &dev_attr_saturation);
-		device_remove_file(&vdev->class_dev,
-					 &dev_attr_streaming);
-		device_remove_file(&vdev->class_dev,
-					 &dev_attr_compression);
-		device_remove_file(&vdev->class_dev,
-					 &dev_attr_bridge);
+		device_remove_file(&vdev->dev, &dev_attr_version);
+		device_remove_file(&vdev->dev, &dev_attr_model);
+		device_remove_file(&vdev->dev, &dev_attr_hue);
+		device_remove_file(&vdev->dev, &dev_attr_contrast);
+		device_remove_file(&vdev->dev, &dev_attr_brightness);
+		device_remove_file(&vdev->dev, &dev_attr_saturation);
+		device_remove_file(&vdev->dev, &dev_attr_streaming);
+		device_remove_file(&vdev->dev, &dev_attr_compression);
+		device_remove_file(&vdev->dev, &dev_attr_bridge);
 	}
 }
 
@@ -1388,13 +1369,8 @@ static const struct file_operations usbvision_fops = {
 /* 	.poll          = video_poll, */
 	.compat_ioctl  = v4l_compat_ioctl32,
 };
-static struct video_device usbvision_video_template = {
-	.owner             = THIS_MODULE,
-	.type		= VID_TYPE_TUNER | VID_TYPE_CAPTURE,
-	.fops		= &usbvision_fops,
-	.name           = "usbvision-video",
-	.release	= video_device_release,
-	.minor		= -1,
+
+static const struct v4l2_ioctl_ops usbvision_ioctl_ops = {
 	.vidioc_querycap      = vidioc_querycap,
 	.vidioc_enum_fmt_vid_cap  = vidioc_enum_fmt_vid_cap,
 	.vidioc_g_fmt_vid_cap     = vidioc_g_fmt_vid_cap,
@@ -1426,6 +1402,14 @@ static struct video_device usbvision_video_template = {
 	.vidioc_g_register    = vidioc_g_register,
 	.vidioc_s_register    = vidioc_s_register,
 #endif
+};
+
+static struct video_device usbvision_video_template = {
+	.fops		= &usbvision_fops,
+	.ioctl_ops 	= &usbvision_ioctl_ops,
+	.name           = "usbvision-video",
+	.release	= video_device_release,
+	.minor		= -1,
 	.tvnorms              = USBVISION_NORMS,
 	.current_norm         = V4L2_STD_PAL
 };
@@ -1441,14 +1425,7 @@ static const struct file_operations usbvision_radio_fops = {
 	.compat_ioctl  = v4l_compat_ioctl32,
 };
 
-static struct video_device usbvision_radio_template=
-{
-	.owner             = THIS_MODULE,
-	.type		= VID_TYPE_TUNER,
-	.fops		= &usbvision_radio_fops,
-	.name           = "usbvision-radio",
-	.release	= video_device_release,
-	.minor		= -1,
+static const struct v4l2_ioctl_ops usbvision_radio_ioctl_ops = {
 	.vidioc_querycap      = vidioc_querycap,
 	.vidioc_enum_input    = vidioc_enum_input,
 	.vidioc_g_input       = vidioc_g_input,
@@ -1462,6 +1439,14 @@ static struct video_device usbvision_radio_template=
 	.vidioc_s_tuner       = vidioc_s_tuner,
 	.vidioc_g_frequency   = vidioc_g_frequency,
 	.vidioc_s_frequency   = vidioc_s_frequency,
+};
+
+static struct video_device usbvision_radio_template = {
+	.fops		= &usbvision_radio_fops,
+	.name           = "usbvision-radio",
+	.release	= video_device_release,
+	.minor		= -1,
+	.ioctl_ops 	= &usbvision_radio_ioctl_ops,
 
 	.tvnorms              = USBVISION_NORMS,
 	.current_norm         = V4L2_STD_PAL
@@ -1479,8 +1464,6 @@ static const struct file_operations usbvision_vbi_fops = {
 
 static struct video_device usbvision_vbi_template=
 {
-	.owner             = THIS_MODULE,
-	.type		= VID_TYPE_TUNER,
 	.fops		= &usbvision_vbi_fops,
 	.release	= video_device_release,
 	.name           = "usbvision-vbi",
@@ -1506,7 +1489,7 @@ static struct video_device *usbvision_vdev_init(struct usb_usbvision *usbvision,
 	}
 	*vdev = *vdev_template;
 //	vdev->minor   = -1;
-	vdev->dev     = &usb_dev->dev;
+	vdev->parent  = &usb_dev->dev;
 	snprintf(vdev->name, sizeof(vdev->name), "%s", name);
 	video_set_drvdata(vdev, usbvision);
 	return vdev;
diff --git a/drivers/media/video/uvc/uvc_ctrl.c b/drivers/media/video/uvc/uvc_ctrl.c
index 3ae95512666f..6ef3e5297de8 100644
--- a/drivers/media/video/uvc/uvc_ctrl.c
+++ b/drivers/media/video/uvc/uvc_ctrl.c
@@ -195,8 +195,8 @@ static struct uvc_menu_info power_line_frequency_controls[] = {
 };
 
 static struct uvc_menu_info exposure_auto_controls[] = {
-	{ 1, "Manual Mode" },
 	{ 2, "Auto Mode" },
+	{ 1, "Manual Mode" },
 	{ 4, "Shutter Priority Mode" },
 	{ 8, "Aperture Priority Mode" },
 };
@@ -585,13 +585,18 @@ int uvc_query_v4l2_ctrl(struct uvc_video_device *video,
 	struct uvc_control_mapping *mapping;
 	struct uvc_menu_info *menu;
 	unsigned int i;
-	__u8 data[8];
+	__u8 *data;
 	int ret;
 
 	ctrl = uvc_find_control(video, v4l2_ctrl->id, &mapping);
 	if (ctrl == NULL)
 		return -EINVAL;
 
+	data = kmalloc(8, GFP_KERNEL);
+	if (data == NULL)
+		return -ENOMEM;
+
+	memset(v4l2_ctrl, 0, sizeof *v4l2_ctrl);
 	v4l2_ctrl->id = mapping->id;
 	v4l2_ctrl->type = mapping->v4l2_type;
 	strncpy(v4l2_ctrl->name, mapping->name, sizeof v4l2_ctrl->name);
@@ -603,12 +608,13 @@ int uvc_query_v4l2_ctrl(struct uvc_video_device *video,
 	if (ctrl->info->flags & UVC_CONTROL_GET_DEF) {
 		if ((ret = uvc_query_ctrl(video->dev, GET_DEF, ctrl->entity->id,
 				video->dev->intfnum, ctrl->info->selector,
-				&data, ctrl->info->size)) < 0)
-			return ret;
+				data, ctrl->info->size)) < 0)
+			goto out;
 		v4l2_ctrl->default_value = uvc_get_le_value(data, mapping);
 	}
 
-	if (mapping->v4l2_type == V4L2_CTRL_TYPE_MENU) {
+	switch (mapping->v4l2_type) {
+	case V4L2_CTRL_TYPE_MENU:
 		v4l2_ctrl->minimum = 0;
 		v4l2_ctrl->maximum = mapping->menu_count - 1;
 		v4l2_ctrl->step = 1;
@@ -621,32 +627,46 @@ int uvc_query_v4l2_ctrl(struct uvc_video_device *video,
 			}
 		}
 
-		return 0;
+		ret = 0;
+		goto out;
+
+	case V4L2_CTRL_TYPE_BOOLEAN:
+		v4l2_ctrl->minimum = 0;
+		v4l2_ctrl->maximum = 1;
+		v4l2_ctrl->step = 1;
+		ret = 0;
+		goto out;
+
+	default:
+		break;
 	}
 
 	if (ctrl->info->flags & UVC_CONTROL_GET_MIN) {
 		if ((ret = uvc_query_ctrl(video->dev, GET_MIN, ctrl->entity->id,
 				video->dev->intfnum, ctrl->info->selector,
-				&data, ctrl->info->size)) < 0)
-			return ret;
+				data, ctrl->info->size)) < 0)
+			goto out;
 		v4l2_ctrl->minimum = uvc_get_le_value(data, mapping);
 	}
 	if (ctrl->info->flags & UVC_CONTROL_GET_MAX) {
 		if ((ret = uvc_query_ctrl(video->dev, GET_MAX, ctrl->entity->id,
 				video->dev->intfnum, ctrl->info->selector,
-				&data, ctrl->info->size)) < 0)
-			return ret;
+				data, ctrl->info->size)) < 0)
+			goto out;
 		v4l2_ctrl->maximum = uvc_get_le_value(data, mapping);
 	}
 	if (ctrl->info->flags & UVC_CONTROL_GET_RES) {
 		if ((ret = uvc_query_ctrl(video->dev, GET_RES, ctrl->entity->id,
 				video->dev->intfnum, ctrl->info->selector,
-				&data, ctrl->info->size)) < 0)
-			return ret;
+				data, ctrl->info->size)) < 0)
+			goto out;
 		v4l2_ctrl->step = uvc_get_le_value(data, mapping);
 	}
 
-	return 0;
+	ret = 0;
+out:
+	kfree(data);
+	return ret;
 }
 
 
diff --git a/drivers/media/video/uvc/uvc_driver.c b/drivers/media/video/uvc/uvc_driver.c
index f2b2983fe062..7e102034d38d 100644
--- a/drivers/media/video/uvc/uvc_driver.c
+++ b/drivers/media/video/uvc/uvc_driver.c
@@ -1458,9 +1458,7 @@ static int uvc_register_video(struct uvc_device *dev)
 	 * unregistered before the reference is released, so we don't need to
 	 * get another one.
 	 */
-	vdev->dev = &dev->intf->dev;
-	vdev->type = 0;
-	vdev->type2 = 0;
+	vdev->parent = &dev->intf->dev;
 	vdev->minor = -1;
 	vdev->fops = &uvc_fops;
 	vdev->release = video_device_release;
@@ -1886,7 +1884,7 @@ static struct usb_device_id uvc_ids[] = {
 	  .bInterfaceSubClass	= 1,
 	  .bInterfaceProtocol	= 0,
 	  .driver_info		= UVC_QUIRK_PROBE_MINMAX },
-	/* Packard Bell OEM Webcam */
+	/* Packard Bell OEM Webcam - Bison Electronics */
 	{ .match_flags		= USB_DEVICE_ID_MATCH_DEVICE
 				| USB_DEVICE_ID_MATCH_INT_INFO,
 	  .idVendor		= 0x5986,
@@ -1895,7 +1893,7 @@ static struct usb_device_id uvc_ids[] = {
 	  .bInterfaceSubClass	= 1,
 	  .bInterfaceProtocol	= 0,
 	  .driver_info		= UVC_QUIRK_PROBE_MINMAX },
-	/* Acer Crystal Eye webcam */
+	/* Acer Crystal Eye webcam - Bison Electronics */
 	{ .match_flags		= USB_DEVICE_ID_MATCH_DEVICE
 				| USB_DEVICE_ID_MATCH_INT_INFO,
 	  .idVendor		= 0x5986,
@@ -1904,7 +1902,7 @@ static struct usb_device_id uvc_ids[] = {
 	  .bInterfaceSubClass	= 1,
 	  .bInterfaceProtocol	= 0,
 	  .driver_info		= UVC_QUIRK_PROBE_MINMAX },
-	/* Medion Akoya Mini E1210 */
+	/* Medion Akoya Mini E1210 - Bison Electronics */
 	{ .match_flags		= USB_DEVICE_ID_MATCH_DEVICE
 				| USB_DEVICE_ID_MATCH_INT_INFO,
 	  .idVendor		= 0x5986,
@@ -1913,7 +1911,7 @@ static struct usb_device_id uvc_ids[] = {
 	  .bInterfaceSubClass	= 1,
 	  .bInterfaceProtocol	= 0,
 	  .driver_info		= UVC_QUIRK_PROBE_MINMAX },
-	/* Acer OrbiCam - Unknown vendor */
+	/* Acer OrbiCam - Bison Electronics */
 	{ .match_flags		= USB_DEVICE_ID_MATCH_DEVICE
 				| USB_DEVICE_ID_MATCH_INT_INFO,
 	  .idVendor		= 0x5986,
@@ -1922,6 +1920,24 @@ static struct usb_device_id uvc_ids[] = {
 	  .bInterfaceSubClass	= 1,
 	  .bInterfaceProtocol	= 0,
 	  .driver_info		= UVC_QUIRK_PROBE_MINMAX },
+	/* Bison Electronics */
+	{ .match_flags		= USB_DEVICE_ID_MATCH_DEVICE
+				| USB_DEVICE_ID_MATCH_INT_INFO,
+	  .idVendor		= 0x5986,
+	  .idProduct		= 0x0300,
+	  .bInterfaceClass	= USB_CLASS_VIDEO,
+	  .bInterfaceSubClass	= 1,
+	  .bInterfaceProtocol	= 0,
+	  .driver_info		= UVC_QUIRK_PROBE_MINMAX },
+	/* Clevo M570TU - Bison Electronics */
+	{ .match_flags		= USB_DEVICE_ID_MATCH_DEVICE
+				| USB_DEVICE_ID_MATCH_INT_INFO,
+	  .idVendor		= 0x5986,
+	  .idProduct		= 0x0303,
+	  .bInterfaceClass	= USB_CLASS_VIDEO,
+	  .bInterfaceSubClass	= 1,
+	  .bInterfaceProtocol	= 0,
+	  .driver_info		= UVC_QUIRK_PROBE_MINMAX },
 	/* Generic USB Video Class */
 	{ USB_INTERFACE_INFO(USB_CLASS_VIDEO, 1, 0) },
 	{}
diff --git a/drivers/media/video/uvc/uvc_v4l2.c b/drivers/media/video/uvc/uvc_v4l2.c
index b5a11eb8f9fa..d7bd71be40a9 100644
--- a/drivers/media/video/uvc/uvc_v4l2.c
+++ b/drivers/media/video/uvc/uvc_v4l2.c
@@ -23,6 +23,7 @@
 #include <asm/atomic.h>
 
 #include <media/v4l2-common.h>
+#include <media/v4l2-ioctl.h>
 
 #include "uvcvideo.h"
 
diff --git a/drivers/media/video/uvc/uvc_video.c b/drivers/media/video/uvc/uvc_video.c
index ad63794fda77..6854ac78a161 100644
--- a/drivers/media/video/uvc/uvc_video.c
+++ b/drivers/media/video/uvc/uvc_video.c
@@ -90,17 +90,20 @@ static void uvc_fixup_buffer_size(struct uvc_video_device *video,
 static int uvc_get_video_ctrl(struct uvc_video_device *video,
 	struct uvc_streaming_control *ctrl, int probe, __u8 query)
 {
-	__u8 data[34];
-	__u8 size;
+	__u8 *data;
+	__u16 size;
 	int ret;
 
 	size = video->dev->uvc_version >= 0x0110 ? 34 : 26;
+	data = kmalloc(size, GFP_KERNEL);
+	if (data == NULL)
+		return -ENOMEM;
+
 	ret = __uvc_query_ctrl(video->dev, query, 0, video->streaming->intfnum,
-		probe ? VS_PROBE_CONTROL : VS_COMMIT_CONTROL, &data, size,
+		probe ? VS_PROBE_CONTROL : VS_COMMIT_CONTROL, data, size,
 		UVC_CTRL_STREAMING_TIMEOUT);
-
 	if (ret < 0)
-		return ret;
+		goto out;
 
 	ctrl->bmHint = le16_to_cpup((__le16 *)&data[0]);
 	ctrl->bFormatIndex = data[2];
@@ -136,17 +139,22 @@ static int uvc_get_video_ctrl(struct uvc_video_device *video,
 	 */
 	uvc_fixup_buffer_size(video, ctrl);
 
-	return 0;
+out:
+	kfree(data);
+	return ret;
 }
 
 int uvc_set_video_ctrl(struct uvc_video_device *video,
 	struct uvc_streaming_control *ctrl, int probe)
 {
-	__u8 data[34];
-	__u8 size;
+	__u8 *data;
+	__u16 size;
+	int ret;
 
 	size = video->dev->uvc_version >= 0x0110 ? 34 : 26;
-	memset(data, 0, sizeof data);
+	data = kzalloc(size, GFP_KERNEL);
+	if (data == NULL)
+		return -ENOMEM;
 
 	*(__le16 *)&data[0] = cpu_to_le16(ctrl->bmHint);
 	data[2] = ctrl->bFormatIndex;
@@ -174,10 +182,13 @@ int uvc_set_video_ctrl(struct uvc_video_device *video,
 		data[33] = ctrl->bMaxVersion;
 	}
 
-	return __uvc_query_ctrl(video->dev, SET_CUR, 0,
+	ret = __uvc_query_ctrl(video->dev, SET_CUR, 0,
 		video->streaming->intfnum,
-		probe ? VS_PROBE_CONTROL : VS_COMMIT_CONTROL, &data, size,
+		probe ? VS_PROBE_CONTROL : VS_COMMIT_CONTROL, data, size,
 		UVC_CTRL_STREAMING_TIMEOUT);
+
+	kfree(data);
+	return ret;
 }
 
 int uvc_probe_video(struct uvc_video_device *video,
diff --git a/drivers/media/video/v4l1-compat.c b/drivers/media/video/v4l1-compat.c
index a0f6c60279ec..79937d1031fc 100644
--- a/drivers/media/video/v4l1-compat.c
+++ b/drivers/media/video/v4l1-compat.c
@@ -30,6 +30,7 @@
 #include <linux/slab.h>
 #include <linux/videodev.h>
 #include <media/v4l2-common.h>
+#include <media/v4l2-ioctl.h>
 
 #include <asm/uaccess.h>
 #include <asm/system.h>
diff --git a/drivers/media/video/v4l2-common.c b/drivers/media/video/v4l2-common.c
index e9dd996fd5df..88ca13104417 100644
--- a/drivers/media/video/v4l2-common.c
+++ b/drivers/media/video/v4l2-common.c
@@ -64,7 +64,7 @@
 #include <linux/kmod.h>
 #endif
 
-#include <linux/videodev.h>
+#include <linux/videodev2.h>
 
 MODULE_AUTHOR("Bill Dirks, Justin Schoeman, Gerd Knorr");
 MODULE_DESCRIPTION("misc helper functions for v4l2 device drivers");
diff --git a/drivers/media/video/v4l2-dev.c b/drivers/media/video/v4l2-dev.c
new file mode 100644
index 000000000000..6f36006aecda
--- /dev/null
+++ b/drivers/media/video/v4l2-dev.c
@@ -0,0 +1,424 @@
+/*
+ * Video capture interface for Linux version 2
+ *
+ *	A generic video device interface for the LINUX operating system
+ *	using a set of device structures/vectors for low level operations.
+ *
+ *	This program is free software; you can redistribute it and/or
+ *	modify it under the terms of the GNU General Public License
+ *	as published by the Free Software Foundation; either version
+ *	2 of the License, or (at your option) any later version.
+ *
+ * Authors:	Alan Cox, <alan@redhat.com> (version 1)
+ *              Mauro Carvalho Chehab <mchehab@infradead.org> (version 2)
+ *
+ * Fixes:	20000516  Claudio Matsuoka <claudio@conectiva.com>
+ *		- Added procfs support
+ */
+
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/mm.h>
+#include <linux/string.h>
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/kmod.h>
+#include <linux/slab.h>
+#include <linux/smp_lock.h>
+#include <asm/uaccess.h>
+#include <asm/system.h>
+
+#include <media/v4l2-common.h>
+
+#define VIDEO_NUM_DEVICES	256
+#define VIDEO_NAME              "video4linux"
+
+/*
+ *	sysfs stuff
+ */
+
+static ssize_t show_index(struct device *cd,
+			 struct device_attribute *attr, char *buf)
+{
+	struct video_device *vfd = container_of(cd, struct video_device, dev);
+	return sprintf(buf, "%i\n", vfd->index);
+}
+
+static ssize_t show_name(struct device *cd,
+			 struct device_attribute *attr, char *buf)
+{
+	struct video_device *vfd = container_of(cd, struct video_device, dev);
+	return sprintf(buf, "%.*s\n", (int)sizeof(vfd->name), vfd->name);
+}
+
+static struct device_attribute video_device_attrs[] = {
+	__ATTR(name, S_IRUGO, show_name, NULL),
+	__ATTR(index, S_IRUGO, show_index, NULL),
+	__ATTR_NULL
+};
+
+struct video_device *video_device_alloc(void)
+{
+	struct video_device *vfd;
+
+	vfd = kzalloc(sizeof(*vfd), GFP_KERNEL);
+	return vfd;
+}
+EXPORT_SYMBOL(video_device_alloc);
+
+void video_device_release(struct video_device *vfd)
+{
+	kfree(vfd);
+}
+EXPORT_SYMBOL(video_device_release);
+
+static void video_release(struct device *cd)
+{
+	struct video_device *vfd = container_of(cd, struct video_device, dev);
+
+#if 1
+	/* needed until all drivers are fixed */
+	if (!vfd->release)
+		return;
+#endif
+	vfd->release(vfd);
+}
+
+static struct class video_class = {
+	.name = VIDEO_NAME,
+	.dev_attrs = video_device_attrs,
+	.dev_release = video_release,
+};
+
+/*
+ *	Active devices
+ */
+
+static struct video_device *video_device[VIDEO_NUM_DEVICES];
+static DEFINE_MUTEX(videodev_lock);
+
+struct video_device *video_devdata(struct file *file)
+{
+	return video_device[iminor(file->f_path.dentry->d_inode)];
+}
+EXPORT_SYMBOL(video_devdata);
+
+/*
+ *	Open a video device - FIXME: Obsoleted
+ */
+static int video_open(struct inode *inode, struct file *file)
+{
+	unsigned int minor = iminor(inode);
+	int err = 0;
+	struct video_device *vfl;
+	const struct file_operations *old_fops;
+
+	if (minor >= VIDEO_NUM_DEVICES)
+		return -ENODEV;
+	lock_kernel();
+	mutex_lock(&videodev_lock);
+	vfl = video_device[minor];
+	if (vfl == NULL) {
+		mutex_unlock(&videodev_lock);
+		request_module("char-major-%d-%d", VIDEO_MAJOR, minor);
+		mutex_lock(&videodev_lock);
+		vfl = video_device[minor];
+		if (vfl == NULL) {
+			mutex_unlock(&videodev_lock);
+			unlock_kernel();
+			return -ENODEV;
+		}
+	}
+	old_fops = file->f_op;
+	file->f_op = fops_get(vfl->fops);
+	if (file->f_op->open)
+		err = file->f_op->open(inode, file);
+	if (err) {
+		fops_put(file->f_op);
+		file->f_op = fops_get(old_fops);
+	}
+	fops_put(old_fops);
+	mutex_unlock(&videodev_lock);
+	unlock_kernel();
+	return err;
+}
+
+/*
+ * open/release helper functions -- handle exclusive opens
+ * Should be removed soon
+ */
+int video_exclusive_open(struct inode *inode, struct file *file)
+{
+	struct video_device *vfl = video_devdata(file);
+	int retval = 0;
+
+	mutex_lock(&vfl->lock);
+	if (vfl->users)
+		retval = -EBUSY;
+	else
+		vfl->users++;
+	mutex_unlock(&vfl->lock);
+	return retval;
+}
+EXPORT_SYMBOL(video_exclusive_open);
+
+int video_exclusive_release(struct inode *inode, struct file *file)
+{
+	struct video_device *vfl = video_devdata(file);
+
+	vfl->users--;
+	return 0;
+}
+EXPORT_SYMBOL(video_exclusive_release);
+
+/**
+ * get_index - assign stream number based on parent device
+ * @vdev: video_device to assign index number to, vdev->dev should be assigned
+ * @num: -1 if auto assign, requested number otherwise
+ *
+ *
+ * returns -ENFILE if num is already in use, a free index number if
+ * successful.
+ */
+static int get_index(struct video_device *vdev, int num)
+{
+	u32 used = 0;
+	const int max_index = sizeof(used) * 8 - 1;
+	int i;
+
+	/* Currently a single v4l driver instance cannot create more than
+	   32 devices.
+	   Increase to u64 or an array of u32 if more are needed. */
+	if (num > max_index) {
+		printk(KERN_ERR "videodev: %s num is too large\n", __func__);
+		return -EINVAL;
+	}
+
+	for (i = 0; i < VIDEO_NUM_DEVICES; i++) {
+		if (video_device[i] != NULL &&
+		    video_device[i] != vdev &&
+		    video_device[i]->parent == vdev->parent) {
+			used |= 1 << video_device[i]->index;
+		}
+	}
+
+	if (num >= 0) {
+		if (used & (1 << num))
+			return -ENFILE;
+		return num;
+	}
+
+	i = ffz(used);
+	return i > max_index ? -ENFILE : i;
+}
+
+static const struct file_operations video_fops;
+
+int video_register_device(struct video_device *vfd, int type, int nr)
+{
+	return video_register_device_index(vfd, type, nr, -1);
+}
+EXPORT_SYMBOL(video_register_device);
+
+/**
+ *	video_register_device_index - register video4linux devices
+ *	@vfd:  video device structure we want to register
+ *	@type: type of device to register
+ *	@nr:   which device number (0 == /dev/video0, 1 == /dev/video1, ...
+ *             -1 == first free)
+ *	@index: stream number based on parent device;
+ *		-1 if auto assign, requested number otherwise
+ *
+ *	The registration code assigns minor numbers based on the type
+ *	requested. -ENFILE is returned in all the device slots for this
+ *	category are full. If not then the minor field is set and the
+ *	driver initialize function is called (if non %NULL).
+ *
+ *	Zero is returned on success.
+ *
+ *	Valid types are
+ *
+ *	%VFL_TYPE_GRABBER - A frame grabber
+ *
+ *	%VFL_TYPE_VTX - A teletext device
+ *
+ *	%VFL_TYPE_VBI - Vertical blank data (undecoded)
+ *
+ *	%VFL_TYPE_RADIO - A radio card
+ */
+
+int video_register_device_index(struct video_device *vfd, int type, int nr,
+					int index)
+{
+	int i = 0;
+	int base;
+	int end;
+	int ret;
+	char *name_base;
+
+	switch (type) {
+	case VFL_TYPE_GRABBER:
+		base = MINOR_VFL_TYPE_GRABBER_MIN;
+		end = MINOR_VFL_TYPE_GRABBER_MAX+1;
+		name_base = "video";
+		break;
+	case VFL_TYPE_VTX:
+		base = MINOR_VFL_TYPE_VTX_MIN;
+		end = MINOR_VFL_TYPE_VTX_MAX+1;
+		name_base = "vtx";
+		break;
+	case VFL_TYPE_VBI:
+		base = MINOR_VFL_TYPE_VBI_MIN;
+		end = MINOR_VFL_TYPE_VBI_MAX+1;
+		name_base = "vbi";
+		break;
+	case VFL_TYPE_RADIO:
+		base = MINOR_VFL_TYPE_RADIO_MIN;
+		end = MINOR_VFL_TYPE_RADIO_MAX+1;
+		name_base = "radio";
+		break;
+	default:
+		printk(KERN_ERR "%s called with unknown type: %d\n",
+		       __func__, type);
+		return -1;
+	}
+
+	/* pick a minor number */
+	mutex_lock(&videodev_lock);
+	if (nr >= 0  &&  nr < end-base) {
+		/* use the one the driver asked for */
+		i = base + nr;
+		if (NULL != video_device[i]) {
+			mutex_unlock(&videodev_lock);
+			return -ENFILE;
+		}
+	} else {
+		/* use first free */
+		for (i = base; i < end; i++)
+			if (NULL == video_device[i])
+				break;
+		if (i == end) {
+			mutex_unlock(&videodev_lock);
+			return -ENFILE;
+		}
+	}
+	video_device[i] = vfd;
+	vfd->vfl_type = type;
+	vfd->minor = i;
+
+	ret = get_index(vfd, index);
+	vfd->index = ret;
+
+	mutex_unlock(&videodev_lock);
+
+	if (ret < 0) {
+		printk(KERN_ERR "%s: get_index failed\n", __func__);
+		goto fail_minor;
+	}
+
+	mutex_init(&vfd->lock);
+
+	/* sysfs class */
+	memset(&vfd->dev, 0x00, sizeof(vfd->dev));
+	vfd->dev.class = &video_class;
+	vfd->dev.devt = MKDEV(VIDEO_MAJOR, vfd->minor);
+	if (vfd->parent)
+		vfd->dev.parent = vfd->parent;
+	sprintf(vfd->dev.bus_id, "%s%d", name_base, i - base);
+	ret = device_register(&vfd->dev);
+	if (ret < 0) {
+		printk(KERN_ERR "%s: device_register failed\n", __func__);
+		goto fail_minor;
+	}
+
+#if 1
+	/* needed until all drivers are fixed */
+	if (!vfd->release)
+		printk(KERN_WARNING "videodev: \"%s\" has no release callback. "
+		       "Please fix your driver for proper sysfs support, see "
+		       "http://lwn.net/Articles/36850/\n", vfd->name);
+#endif
+	return 0;
+
+fail_minor:
+	mutex_lock(&videodev_lock);
+	video_device[vfd->minor] = NULL;
+	vfd->minor = -1;
+	mutex_unlock(&videodev_lock);
+	return ret;
+}
+EXPORT_SYMBOL(video_register_device_index);
+
+/**
+ *	video_unregister_device - unregister a video4linux device
+ *	@vfd: the device to unregister
+ *
+ *	This unregisters the passed device and deassigns the minor
+ *	number. Future open calls will be met with errors.
+ */
+
+void video_unregister_device(struct video_device *vfd)
+{
+	mutex_lock(&videodev_lock);
+	if (video_device[vfd->minor] != vfd)
+		panic("videodev: bad unregister");
+
+	video_device[vfd->minor] = NULL;
+	device_unregister(&vfd->dev);
+	mutex_unlock(&videodev_lock);
+}
+EXPORT_SYMBOL(video_unregister_device);
+
+/*
+ * Video fs operations
+ */
+static const struct file_operations video_fops = {
+	.owner		= THIS_MODULE,
+	.llseek		= no_llseek,
+	.open		= video_open,
+};
+
+/*
+ *	Initialise video for linux
+ */
+
+static int __init videodev_init(void)
+{
+	int ret;
+
+	printk(KERN_INFO "Linux video capture interface: v2.00\n");
+	if (register_chrdev(VIDEO_MAJOR, VIDEO_NAME, &video_fops)) {
+		printk(KERN_WARNING "video_dev: unable to get major %d\n", VIDEO_MAJOR);
+		return -EIO;
+	}
+
+	ret = class_register(&video_class);
+	if (ret < 0) {
+		unregister_chrdev(VIDEO_MAJOR, VIDEO_NAME);
+		printk(KERN_WARNING "video_dev: class_register failed\n");
+		return -EIO;
+	}
+
+	return 0;
+}
+
+static void __exit videodev_exit(void)
+{
+	class_unregister(&video_class);
+	unregister_chrdev(VIDEO_MAJOR, VIDEO_NAME);
+}
+
+module_init(videodev_init)
+module_exit(videodev_exit)
+
+MODULE_AUTHOR("Alan Cox, Mauro Carvalho Chehab <mchehab@infradead.org>");
+MODULE_DESCRIPTION("Device registrar for Video4Linux drivers v2");
+MODULE_LICENSE("GPL");
+
+
+/*
+ * Local variables:
+ * c-basic-offset: 8
+ * End:
+ */
diff --git a/drivers/media/video/v4l2-ioctl.c b/drivers/media/video/v4l2-ioctl.c
new file mode 100644
index 000000000000..fdfe7739c96e
--- /dev/null
+++ b/drivers/media/video/v4l2-ioctl.c
@@ -0,0 +1,1875 @@
+/*
+ * Video capture interface for Linux version 2
+ *
+ * A generic framework to process V4L2 ioctl commands.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ *
+ * Authors:	Alan Cox, <alan@redhat.com> (version 1)
+ *              Mauro Carvalho Chehab <mchehab@infradead.org> (version 2)
+ */
+
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/kernel.h>
+
+#define __OLD_VIDIOC_ /* To allow fixing old calls */
+#include <linux/videodev2.h>
+
+#ifdef CONFIG_VIDEO_V4L1
+#include <linux/videodev.h>
+#endif
+#include <media/v4l2-common.h>
+#include <media/v4l2-ioctl.h>
+#include <linux/video_decoder.h>
+
+#define dbgarg(cmd, fmt, arg...) \
+		do {							\
+		    if (vfd->debug & V4L2_DEBUG_IOCTL_ARG) {		\
+			printk(KERN_DEBUG "%s: ",  vfd->name);		\
+			v4l_printk_ioctl(cmd);				\
+			printk(" " fmt,  ## arg);			\
+		    }							\
+		} while (0)
+
+#define dbgarg2(fmt, arg...) \
+		do {							\
+		    if (vfd->debug & V4L2_DEBUG_IOCTL_ARG)		\
+			printk(KERN_DEBUG "%s: " fmt, vfd->name, ## arg);\
+		} while (0)
+
+struct std_descr {
+	v4l2_std_id std;
+	const char *descr;
+};
+
+static const struct std_descr standards[] = {
+	{ V4L2_STD_NTSC, 	"NTSC"      },
+	{ V4L2_STD_NTSC_M, 	"NTSC-M"    },
+	{ V4L2_STD_NTSC_M_JP, 	"NTSC-M-JP" },
+	{ V4L2_STD_NTSC_M_KR,	"NTSC-M-KR" },
+	{ V4L2_STD_NTSC_443, 	"NTSC-443"  },
+	{ V4L2_STD_PAL, 	"PAL"       },
+	{ V4L2_STD_PAL_BG, 	"PAL-BG"    },
+	{ V4L2_STD_PAL_B, 	"PAL-B"     },
+	{ V4L2_STD_PAL_B1, 	"PAL-B1"    },
+	{ V4L2_STD_PAL_G, 	"PAL-G"     },
+	{ V4L2_STD_PAL_H, 	"PAL-H"     },
+	{ V4L2_STD_PAL_I, 	"PAL-I"     },
+	{ V4L2_STD_PAL_DK, 	"PAL-DK"    },
+	{ V4L2_STD_PAL_D, 	"PAL-D"     },
+	{ V4L2_STD_PAL_D1, 	"PAL-D1"    },
+	{ V4L2_STD_PAL_K, 	"PAL-K"     },
+	{ V4L2_STD_PAL_M, 	"PAL-M"     },
+	{ V4L2_STD_PAL_N, 	"PAL-N"     },
+	{ V4L2_STD_PAL_Nc, 	"PAL-Nc"    },
+	{ V4L2_STD_PAL_60, 	"PAL-60"    },
+	{ V4L2_STD_SECAM, 	"SECAM"     },
+	{ V4L2_STD_SECAM_B, 	"SECAM-B"   },
+	{ V4L2_STD_SECAM_G, 	"SECAM-G"   },
+	{ V4L2_STD_SECAM_H, 	"SECAM-H"   },
+	{ V4L2_STD_SECAM_DK, 	"SECAM-DK"  },
+	{ V4L2_STD_SECAM_D, 	"SECAM-D"   },
+	{ V4L2_STD_SECAM_K, 	"SECAM-K"   },
+	{ V4L2_STD_SECAM_K1, 	"SECAM-K1"  },
+	{ V4L2_STD_SECAM_L, 	"SECAM-L"   },
+	{ V4L2_STD_SECAM_LC, 	"SECAM-Lc"  },
+	{ 0, 			"Unknown"   }
+};
+
+/* video4linux standard ID conversion to standard name
+ */
+const char *v4l2_norm_to_name(v4l2_std_id id)
+{
+	u32 myid = id;
+	int i;
+
+	/* HACK: ppc32 architecture doesn't have __ucmpdi2 function to handle
+	   64 bit comparations. So, on that architecture, with some gcc
+	   variants, compilation fails. Currently, the max value is 30bit wide.
+	 */
+	BUG_ON(myid != id);
+
+	for (i = 0; standards[i].std; i++)
+		if (myid == standards[i].std)
+			break;
+	return standards[i].descr;
+}
+EXPORT_SYMBOL(v4l2_norm_to_name);
+
+/* Fill in the fields of a v4l2_standard structure according to the
+   'id' and 'transmission' parameters.  Returns negative on error.  */
+int v4l2_video_std_construct(struct v4l2_standard *vs,
+			     int id, const char *name)
+{
+	u32 index = vs->index;
+
+	memset(vs, 0, sizeof(struct v4l2_standard));
+	vs->index = index;
+	vs->id    = id;
+	if (id & V4L2_STD_525_60) {
+		vs->frameperiod.numerator = 1001;
+		vs->frameperiod.denominator = 30000;
+		vs->framelines = 525;
+	} else {
+		vs->frameperiod.numerator = 1;
+		vs->frameperiod.denominator = 25;
+		vs->framelines = 625;
+	}
+	strlcpy(vs->name, name, sizeof(vs->name));
+	return 0;
+}
+EXPORT_SYMBOL(v4l2_video_std_construct);
+
+/* ----------------------------------------------------------------- */
+/* some arrays for pretty-printing debug messages of enum types      */
+
+const char *v4l2_field_names[] = {
+	[V4L2_FIELD_ANY]        = "any",
+	[V4L2_FIELD_NONE]       = "none",
+	[V4L2_FIELD_TOP]        = "top",
+	[V4L2_FIELD_BOTTOM]     = "bottom",
+	[V4L2_FIELD_INTERLACED] = "interlaced",
+	[V4L2_FIELD_SEQ_TB]     = "seq-tb",
+	[V4L2_FIELD_SEQ_BT]     = "seq-bt",
+	[V4L2_FIELD_ALTERNATE]  = "alternate",
+	[V4L2_FIELD_INTERLACED_TB] = "interlaced-tb",
+	[V4L2_FIELD_INTERLACED_BT] = "interlaced-bt",
+};
+EXPORT_SYMBOL(v4l2_field_names);
+
+const char *v4l2_type_names[] = {
+	[V4L2_BUF_TYPE_VIDEO_CAPTURE]      = "vid-cap",
+	[V4L2_BUF_TYPE_VIDEO_OVERLAY]      = "vid-overlay",
+	[V4L2_BUF_TYPE_VIDEO_OUTPUT]       = "vid-out",
+	[V4L2_BUF_TYPE_VBI_CAPTURE]        = "vbi-cap",
+	[V4L2_BUF_TYPE_VBI_OUTPUT]         = "vbi-out",
+	[V4L2_BUF_TYPE_SLICED_VBI_CAPTURE] = "sliced-vbi-cap",
+	[V4L2_BUF_TYPE_SLICED_VBI_OUTPUT]  = "sliced-vbi-out",
+	[V4L2_BUF_TYPE_VIDEO_OUTPUT_OVERLAY] = "vid-out-overlay",
+};
+EXPORT_SYMBOL(v4l2_type_names);
+
+static const char *v4l2_memory_names[] = {
+	[V4L2_MEMORY_MMAP]    = "mmap",
+	[V4L2_MEMORY_USERPTR] = "userptr",
+	[V4L2_MEMORY_OVERLAY] = "overlay",
+};
+
+#define prt_names(a, arr) ((((a) >= 0) && ((a) < ARRAY_SIZE(arr))) ? \
+			   arr[a] : "unknown")
+
+/* ------------------------------------------------------------------ */
+/* debug help functions                                               */
+
+#ifdef CONFIG_VIDEO_V4L1_COMPAT
+static const char *v4l1_ioctls[] = {
+	[_IOC_NR(VIDIOCGCAP)]       = "VIDIOCGCAP",
+	[_IOC_NR(VIDIOCGCHAN)]      = "VIDIOCGCHAN",
+	[_IOC_NR(VIDIOCSCHAN)]      = "VIDIOCSCHAN",
+	[_IOC_NR(VIDIOCGTUNER)]     = "VIDIOCGTUNER",
+	[_IOC_NR(VIDIOCSTUNER)]     = "VIDIOCSTUNER",
+	[_IOC_NR(VIDIOCGPICT)]      = "VIDIOCGPICT",
+	[_IOC_NR(VIDIOCSPICT)]      = "VIDIOCSPICT",
+	[_IOC_NR(VIDIOCCAPTURE)]    = "VIDIOCCAPTURE",
+	[_IOC_NR(VIDIOCGWIN)]       = "VIDIOCGWIN",
+	[_IOC_NR(VIDIOCSWIN)]       = "VIDIOCSWIN",
+	[_IOC_NR(VIDIOCGFBUF)]      = "VIDIOCGFBUF",
+	[_IOC_NR(VIDIOCSFBUF)]      = "VIDIOCSFBUF",
+	[_IOC_NR(VIDIOCKEY)]        = "VIDIOCKEY",
+	[_IOC_NR(VIDIOCGFREQ)]      = "VIDIOCGFREQ",
+	[_IOC_NR(VIDIOCSFREQ)]      = "VIDIOCSFREQ",
+	[_IOC_NR(VIDIOCGAUDIO)]     = "VIDIOCGAUDIO",
+	[_IOC_NR(VIDIOCSAUDIO)]     = "VIDIOCSAUDIO",
+	[_IOC_NR(VIDIOCSYNC)]       = "VIDIOCSYNC",
+	[_IOC_NR(VIDIOCMCAPTURE)]   = "VIDIOCMCAPTURE",
+	[_IOC_NR(VIDIOCGMBUF)]      = "VIDIOCGMBUF",
+	[_IOC_NR(VIDIOCGUNIT)]      = "VIDIOCGUNIT",
+	[_IOC_NR(VIDIOCGCAPTURE)]   = "VIDIOCGCAPTURE",
+	[_IOC_NR(VIDIOCSCAPTURE)]   = "VIDIOCSCAPTURE",
+	[_IOC_NR(VIDIOCSPLAYMODE)]  = "VIDIOCSPLAYMODE",
+	[_IOC_NR(VIDIOCSWRITEMODE)] = "VIDIOCSWRITEMODE",
+	[_IOC_NR(VIDIOCGPLAYINFO)]  = "VIDIOCGPLAYINFO",
+	[_IOC_NR(VIDIOCSMICROCODE)] = "VIDIOCSMICROCODE",
+	[_IOC_NR(VIDIOCGVBIFMT)]    = "VIDIOCGVBIFMT",
+	[_IOC_NR(VIDIOCSVBIFMT)]    = "VIDIOCSVBIFMT"
+};
+#define V4L1_IOCTLS ARRAY_SIZE(v4l1_ioctls)
+#endif
+
+static const char *v4l2_ioctls[] = {
+	[_IOC_NR(VIDIOC_QUERYCAP)]         = "VIDIOC_QUERYCAP",
+	[_IOC_NR(VIDIOC_RESERVED)]         = "VIDIOC_RESERVED",
+	[_IOC_NR(VIDIOC_ENUM_FMT)]         = "VIDIOC_ENUM_FMT",
+	[_IOC_NR(VIDIOC_G_FMT)]            = "VIDIOC_G_FMT",
+	[_IOC_NR(VIDIOC_S_FMT)]            = "VIDIOC_S_FMT",
+	[_IOC_NR(VIDIOC_REQBUFS)]          = "VIDIOC_REQBUFS",
+	[_IOC_NR(VIDIOC_QUERYBUF)]         = "VIDIOC_QUERYBUF",
+	[_IOC_NR(VIDIOC_G_FBUF)]           = "VIDIOC_G_FBUF",
+	[_IOC_NR(VIDIOC_S_FBUF)]           = "VIDIOC_S_FBUF",
+	[_IOC_NR(VIDIOC_OVERLAY)]          = "VIDIOC_OVERLAY",
+	[_IOC_NR(VIDIOC_QBUF)]             = "VIDIOC_QBUF",
+	[_IOC_NR(VIDIOC_DQBUF)]            = "VIDIOC_DQBUF",
+	[_IOC_NR(VIDIOC_STREAMON)]         = "VIDIOC_STREAMON",
+	[_IOC_NR(VIDIOC_STREAMOFF)]        = "VIDIOC_STREAMOFF",
+	[_IOC_NR(VIDIOC_G_PARM)]           = "VIDIOC_G_PARM",
+	[_IOC_NR(VIDIOC_S_PARM)]           = "VIDIOC_S_PARM",
+	[_IOC_NR(VIDIOC_G_STD)]            = "VIDIOC_G_STD",
+	[_IOC_NR(VIDIOC_S_STD)]            = "VIDIOC_S_STD",
+	[_IOC_NR(VIDIOC_ENUMSTD)]          = "VIDIOC_ENUMSTD",
+	[_IOC_NR(VIDIOC_ENUMINPUT)]        = "VIDIOC_ENUMINPUT",
+	[_IOC_NR(VIDIOC_G_CTRL)]           = "VIDIOC_G_CTRL",
+	[_IOC_NR(VIDIOC_S_CTRL)]           = "VIDIOC_S_CTRL",
+	[_IOC_NR(VIDIOC_G_TUNER)]          = "VIDIOC_G_TUNER",
+	[_IOC_NR(VIDIOC_S_TUNER)]          = "VIDIOC_S_TUNER",
+	[_IOC_NR(VIDIOC_G_AUDIO)]          = "VIDIOC_G_AUDIO",
+	[_IOC_NR(VIDIOC_S_AUDIO)]          = "VIDIOC_S_AUDIO",
+	[_IOC_NR(VIDIOC_QUERYCTRL)]        = "VIDIOC_QUERYCTRL",
+	[_IOC_NR(VIDIOC_QUERYMENU)]        = "VIDIOC_QUERYMENU",
+	[_IOC_NR(VIDIOC_G_INPUT)]          = "VIDIOC_G_INPUT",
+	[_IOC_NR(VIDIOC_S_INPUT)]          = "VIDIOC_S_INPUT",
+	[_IOC_NR(VIDIOC_G_OUTPUT)]         = "VIDIOC_G_OUTPUT",
+	[_IOC_NR(VIDIOC_S_OUTPUT)]         = "VIDIOC_S_OUTPUT",
+	[_IOC_NR(VIDIOC_ENUMOUTPUT)]       = "VIDIOC_ENUMOUTPUT",
+	[_IOC_NR(VIDIOC_G_AUDOUT)]         = "VIDIOC_G_AUDOUT",
+	[_IOC_NR(VIDIOC_S_AUDOUT)]         = "VIDIOC_S_AUDOUT",
+	[_IOC_NR(VIDIOC_G_MODULATOR)]      = "VIDIOC_G_MODULATOR",
+	[_IOC_NR(VIDIOC_S_MODULATOR)]      = "VIDIOC_S_MODULATOR",
+	[_IOC_NR(VIDIOC_G_FREQUENCY)]      = "VIDIOC_G_FREQUENCY",
+	[_IOC_NR(VIDIOC_S_FREQUENCY)]      = "VIDIOC_S_FREQUENCY",
+	[_IOC_NR(VIDIOC_CROPCAP)]          = "VIDIOC_CROPCAP",
+	[_IOC_NR(VIDIOC_G_CROP)]           = "VIDIOC_G_CROP",
+	[_IOC_NR(VIDIOC_S_CROP)]           = "VIDIOC_S_CROP",
+	[_IOC_NR(VIDIOC_G_JPEGCOMP)]       = "VIDIOC_G_JPEGCOMP",
+	[_IOC_NR(VIDIOC_S_JPEGCOMP)]       = "VIDIOC_S_JPEGCOMP",
+	[_IOC_NR(VIDIOC_QUERYSTD)]         = "VIDIOC_QUERYSTD",
+	[_IOC_NR(VIDIOC_TRY_FMT)]          = "VIDIOC_TRY_FMT",
+	[_IOC_NR(VIDIOC_ENUMAUDIO)]        = "VIDIOC_ENUMAUDIO",
+	[_IOC_NR(VIDIOC_ENUMAUDOUT)]       = "VIDIOC_ENUMAUDOUT",
+	[_IOC_NR(VIDIOC_G_PRIORITY)]       = "VIDIOC_G_PRIORITY",
+	[_IOC_NR(VIDIOC_S_PRIORITY)]       = "VIDIOC_S_PRIORITY",
+	[_IOC_NR(VIDIOC_G_SLICED_VBI_CAP)] = "VIDIOC_G_SLICED_VBI_CAP",
+	[_IOC_NR(VIDIOC_LOG_STATUS)]       = "VIDIOC_LOG_STATUS",
+	[_IOC_NR(VIDIOC_G_EXT_CTRLS)]      = "VIDIOC_G_EXT_CTRLS",
+	[_IOC_NR(VIDIOC_S_EXT_CTRLS)]      = "VIDIOC_S_EXT_CTRLS",
+	[_IOC_NR(VIDIOC_TRY_EXT_CTRLS)]    = "VIDIOC_TRY_EXT_CTRLS",
+#if 1
+	[_IOC_NR(VIDIOC_ENUM_FRAMESIZES)]  = "VIDIOC_ENUM_FRAMESIZES",
+	[_IOC_NR(VIDIOC_ENUM_FRAMEINTERVALS)] = "VIDIOC_ENUM_FRAMEINTERVALS",
+	[_IOC_NR(VIDIOC_G_ENC_INDEX)] 	   = "VIDIOC_G_ENC_INDEX",
+	[_IOC_NR(VIDIOC_ENCODER_CMD)] 	   = "VIDIOC_ENCODER_CMD",
+	[_IOC_NR(VIDIOC_TRY_ENCODER_CMD)]  = "VIDIOC_TRY_ENCODER_CMD",
+
+	[_IOC_NR(VIDIOC_DBG_S_REGISTER)]   = "VIDIOC_DBG_S_REGISTER",
+	[_IOC_NR(VIDIOC_DBG_G_REGISTER)]   = "VIDIOC_DBG_G_REGISTER",
+
+	[_IOC_NR(VIDIOC_G_CHIP_IDENT)]     = "VIDIOC_G_CHIP_IDENT",
+	[_IOC_NR(VIDIOC_S_HW_FREQ_SEEK)]   = "VIDIOC_S_HW_FREQ_SEEK",
+#endif
+};
+#define V4L2_IOCTLS ARRAY_SIZE(v4l2_ioctls)
+
+static const char *v4l2_int_ioctls[] = {
+#ifdef CONFIG_VIDEO_V4L1_COMPAT
+	[_IOC_NR(DECODER_GET_CAPABILITIES)]    = "DECODER_GET_CAPABILITIES",
+	[_IOC_NR(DECODER_GET_STATUS)]          = "DECODER_GET_STATUS",
+	[_IOC_NR(DECODER_SET_NORM)]            = "DECODER_SET_NORM",
+	[_IOC_NR(DECODER_SET_INPUT)]           = "DECODER_SET_INPUT",
+	[_IOC_NR(DECODER_SET_OUTPUT)]          = "DECODER_SET_OUTPUT",
+	[_IOC_NR(DECODER_ENABLE_OUTPUT)]       = "DECODER_ENABLE_OUTPUT",
+	[_IOC_NR(DECODER_SET_PICTURE)]         = "DECODER_SET_PICTURE",
+	[_IOC_NR(DECODER_SET_GPIO)]            = "DECODER_SET_GPIO",
+	[_IOC_NR(DECODER_INIT)]                = "DECODER_INIT",
+	[_IOC_NR(DECODER_SET_VBI_BYPASS)]      = "DECODER_SET_VBI_BYPASS",
+	[_IOC_NR(DECODER_DUMP)]                = "DECODER_DUMP",
+#endif
+	[_IOC_NR(AUDC_SET_RADIO)]              = "AUDC_SET_RADIO",
+
+	[_IOC_NR(TUNER_SET_TYPE_ADDR)]         = "TUNER_SET_TYPE_ADDR",
+	[_IOC_NR(TUNER_SET_STANDBY)]           = "TUNER_SET_STANDBY",
+	[_IOC_NR(TUNER_SET_CONFIG)]            = "TUNER_SET_CONFIG",
+
+	[_IOC_NR(VIDIOC_INT_S_TUNER_MODE)]     = "VIDIOC_INT_S_TUNER_MODE",
+	[_IOC_NR(VIDIOC_INT_RESET)]            = "VIDIOC_INT_RESET",
+	[_IOC_NR(VIDIOC_INT_AUDIO_CLOCK_FREQ)] = "VIDIOC_INT_AUDIO_CLOCK_FREQ",
+	[_IOC_NR(VIDIOC_INT_DECODE_VBI_LINE)]  = "VIDIOC_INT_DECODE_VBI_LINE",
+	[_IOC_NR(VIDIOC_INT_S_VBI_DATA)]       = "VIDIOC_INT_S_VBI_DATA",
+	[_IOC_NR(VIDIOC_INT_G_VBI_DATA)]       = "VIDIOC_INT_G_VBI_DATA",
+	[_IOC_NR(VIDIOC_INT_I2S_CLOCK_FREQ)]   = "VIDIOC_INT_I2S_CLOCK_FREQ",
+	[_IOC_NR(VIDIOC_INT_S_STANDBY)]        = "VIDIOC_INT_S_STANDBY",
+	[_IOC_NR(VIDIOC_INT_S_AUDIO_ROUTING)]  = "VIDIOC_INT_S_AUDIO_ROUTING",
+	[_IOC_NR(VIDIOC_INT_G_AUDIO_ROUTING)]  = "VIDIOC_INT_G_AUDIO_ROUTING",
+	[_IOC_NR(VIDIOC_INT_S_VIDEO_ROUTING)]  = "VIDIOC_INT_S_VIDEO_ROUTING",
+	[_IOC_NR(VIDIOC_INT_G_VIDEO_ROUTING)]  = "VIDIOC_INT_G_VIDEO_ROUTING",
+	[_IOC_NR(VIDIOC_INT_S_CRYSTAL_FREQ)]   = "VIDIOC_INT_S_CRYSTAL_FREQ",
+	[_IOC_NR(VIDIOC_INT_INIT)]   	       = "VIDIOC_INT_INIT",
+	[_IOC_NR(VIDIOC_INT_G_STD_OUTPUT)]     = "VIDIOC_INT_G_STD_OUTPUT",
+	[_IOC_NR(VIDIOC_INT_S_STD_OUTPUT)]     = "VIDIOC_INT_S_STD_OUTPUT",
+};
+#define V4L2_INT_IOCTLS ARRAY_SIZE(v4l2_int_ioctls)
+
+/* Common ioctl debug function. This function can be used by
+   external ioctl messages as well as internal V4L ioctl */
+void v4l_printk_ioctl(unsigned int cmd)
+{
+	char *dir, *type;
+
+	switch (_IOC_TYPE(cmd)) {
+	case 'd':
+		if (_IOC_NR(cmd) >= V4L2_INT_IOCTLS) {
+			type = "v4l2_int";
+			break;
+		}
+		printk("%s", v4l2_int_ioctls[_IOC_NR(cmd)]);
+		return;
+#ifdef CONFIG_VIDEO_V4L1_COMPAT
+	case 'v':
+		if (_IOC_NR(cmd) >= V4L1_IOCTLS) {
+			type = "v4l1";
+			break;
+		}
+		printk("%s", v4l1_ioctls[_IOC_NR(cmd)]);
+		return;
+#endif
+	case 'V':
+		if (_IOC_NR(cmd) >= V4L2_IOCTLS) {
+			type = "v4l2";
+			break;
+		}
+		printk("%s", v4l2_ioctls[_IOC_NR(cmd)]);
+		return;
+	default:
+		type = "unknown";
+	}
+
+	switch (_IOC_DIR(cmd)) {
+	case _IOC_NONE:              dir = "--"; break;
+	case _IOC_READ:              dir = "r-"; break;
+	case _IOC_WRITE:             dir = "-w"; break;
+	case _IOC_READ | _IOC_WRITE: dir = "rw"; break;
+	default:                     dir = "*ERR*"; break;
+	}
+	printk("%s ioctl '%c', dir=%s, #%d (0x%08x)",
+		type, _IOC_TYPE(cmd), dir, _IOC_NR(cmd), cmd);
+}
+EXPORT_SYMBOL(v4l_printk_ioctl);
+
+/*
+ * helper function -- handles userspace copying for ioctl arguments
+ */
+
+#ifdef __OLD_VIDIOC_
+static unsigned int
+video_fix_command(unsigned int cmd)
+{
+	switch (cmd) {
+	case VIDIOC_OVERLAY_OLD:
+		cmd = VIDIOC_OVERLAY;
+		break;
+	case VIDIOC_S_PARM_OLD:
+		cmd = VIDIOC_S_PARM;
+		break;
+	case VIDIOC_S_CTRL_OLD:
+		cmd = VIDIOC_S_CTRL;
+		break;
+	case VIDIOC_G_AUDIO_OLD:
+		cmd = VIDIOC_G_AUDIO;
+		break;
+	case VIDIOC_G_AUDOUT_OLD:
+		cmd = VIDIOC_G_AUDOUT;
+		break;
+	case VIDIOC_CROPCAP_OLD:
+		cmd = VIDIOC_CROPCAP;
+		break;
+	}
+	return cmd;
+}
+#endif
+
+/*
+ * Obsolete usercopy function - Should be removed soon
+ */
+int
+video_usercopy(struct inode *inode, struct file *file,
+	       unsigned int cmd, unsigned long arg,
+	       int (*func)(struct inode *inode, struct file *file,
+			   unsigned int cmd, void *arg))
+{
+	char	sbuf[128];
+	void    *mbuf = NULL;
+	void	*parg = NULL;
+	int	err  = -EINVAL;
+	int     is_ext_ctrl;
+	size_t  ctrls_size = 0;
+	void __user *user_ptr = NULL;
+
+#ifdef __OLD_VIDIOC_
+	cmd = video_fix_command(cmd);
+#endif
+	is_ext_ctrl = (cmd == VIDIOC_S_EXT_CTRLS || cmd == VIDIOC_G_EXT_CTRLS ||
+		       cmd == VIDIOC_TRY_EXT_CTRLS);
+
+	/*  Copy arguments into temp kernel buffer  */
+	switch (_IOC_DIR(cmd)) {
+	case _IOC_NONE:
+		parg = NULL;
+		break;
+	case _IOC_READ:
+	case _IOC_WRITE:
+	case (_IOC_WRITE | _IOC_READ):
+		if (_IOC_SIZE(cmd) <= sizeof(sbuf)) {
+			parg = sbuf;
+		} else {
+			/* too big to allocate from stack */
+			mbuf = kmalloc(_IOC_SIZE(cmd), GFP_KERNEL);
+			if (NULL == mbuf)
+				return -ENOMEM;
+			parg = mbuf;
+		}
+
+		err = -EFAULT;
+		if (_IOC_DIR(cmd) & _IOC_WRITE)
+			if (copy_from_user(parg, (void __user *)arg, _IOC_SIZE(cmd)))
+				goto out;
+		break;
+	}
+	if (is_ext_ctrl) {
+		struct v4l2_ext_controls *p = parg;
+
+		/* In case of an error, tell the caller that it wasn't
+		   a specific control that caused it. */
+		p->error_idx = p->count;
+		user_ptr = (void __user *)p->controls;
+		if (p->count) {
+			ctrls_size = sizeof(struct v4l2_ext_control) * p->count;
+			/* Note: v4l2_ext_controls fits in sbuf[] so mbuf is still NULL. */
+			mbuf = kmalloc(ctrls_size, GFP_KERNEL);
+			err = -ENOMEM;
+			if (NULL == mbuf)
+				goto out_ext_ctrl;
+			err = -EFAULT;
+			if (copy_from_user(mbuf, user_ptr, ctrls_size))
+				goto out_ext_ctrl;
+			p->controls = mbuf;
+		}
+	}
+
+	/* call driver */
+	err = func(inode, file, cmd, parg);
+	if (err == -ENOIOCTLCMD)
+		err = -EINVAL;
+	if (is_ext_ctrl) {
+		struct v4l2_ext_controls *p = parg;
+
+		p->controls = (void *)user_ptr;
+		if (p->count && err == 0 && copy_to_user(user_ptr, mbuf, ctrls_size))
+			err = -EFAULT;
+		goto out_ext_ctrl;
+	}
+	if (err < 0)
+		goto out;
+
+out_ext_ctrl:
+	/*  Copy results into user buffer  */
+	switch (_IOC_DIR(cmd)) {
+	case _IOC_READ:
+	case (_IOC_WRITE | _IOC_READ):
+		if (copy_to_user((void __user *)arg, parg, _IOC_SIZE(cmd)))
+			err = -EFAULT;
+		break;
+	}
+
+out:
+	kfree(mbuf);
+	return err;
+}
+EXPORT_SYMBOL(video_usercopy);
+
+static void dbgbuf(unsigned int cmd, struct video_device *vfd,
+					struct v4l2_buffer *p)
+{
+	struct v4l2_timecode *tc = &p->timecode;
+
+	dbgarg(cmd, "%02ld:%02d:%02d.%08ld index=%d, type=%s, "
+		"bytesused=%d, flags=0x%08d, "
+		"field=%0d, sequence=%d, memory=%s, offset/userptr=0x%08lx, length=%d\n",
+			p->timestamp.tv_sec / 3600,
+			(int)(p->timestamp.tv_sec / 60) % 60,
+			(int)(p->timestamp.tv_sec % 60),
+			p->timestamp.tv_usec,
+			p->index,
+			prt_names(p->type, v4l2_type_names),
+			p->bytesused, p->flags,
+			p->field, p->sequence,
+			prt_names(p->memory, v4l2_memory_names),
+			p->m.userptr, p->length);
+	dbgarg2("timecode=%02d:%02d:%02d type=%d, "
+		"flags=0x%08d, frames=%d, userbits=0x%08x\n",
+			tc->hours, tc->minutes, tc->seconds,
+			tc->type, tc->flags, tc->frames, *(__u32 *)tc->userbits);
+}
+
+static inline void dbgrect(struct video_device *vfd, char *s,
+							struct v4l2_rect *r)
+{
+	dbgarg2("%sRect start at %dx%d, size=%dx%d\n", s, r->left, r->top,
+						r->width, r->height);
+};
+
+static inline void v4l_print_pix_fmt(struct video_device *vfd,
+						struct v4l2_pix_format *fmt)
+{
+	dbgarg2("width=%d, height=%d, format=%c%c%c%c, field=%s, "
+		"bytesperline=%d sizeimage=%d, colorspace=%d\n",
+		fmt->width, fmt->height,
+		(fmt->pixelformat & 0xff),
+		(fmt->pixelformat >>  8) & 0xff,
+		(fmt->pixelformat >> 16) & 0xff,
+		(fmt->pixelformat >> 24) & 0xff,
+		prt_names(fmt->field, v4l2_field_names),
+		fmt->bytesperline, fmt->sizeimage, fmt->colorspace);
+};
+
+static inline void v4l_print_ext_ctrls(unsigned int cmd,
+	struct video_device *vfd, struct v4l2_ext_controls *c, int show_vals)
+{
+	__u32 i;
+
+	if (!(vfd->debug & V4L2_DEBUG_IOCTL_ARG))
+		return;
+	dbgarg(cmd, "");
+	printk(KERN_CONT "class=0x%x", c->ctrl_class);
+	for (i = 0; i < c->count; i++) {
+		if (show_vals)
+			printk(KERN_CONT " id/val=0x%x/0x%x",
+				c->controls[i].id, c->controls[i].value);
+		else
+			printk(KERN_CONT " id=0x%x", c->controls[i].id);
+	}
+	printk(KERN_CONT "\n");
+};
+
+static inline int check_ext_ctrls(struct v4l2_ext_controls *c, int allow_priv)
+{
+	__u32 i;
+
+	/* zero the reserved fields */
+	c->reserved[0] = c->reserved[1] = 0;
+	for (i = 0; i < c->count; i++) {
+		c->controls[i].reserved2[0] = 0;
+		c->controls[i].reserved2[1] = 0;
+	}
+	/* V4L2_CID_PRIVATE_BASE cannot be used as control class
+	   when using extended controls.
+	   Only when passed in through VIDIOC_G_CTRL and VIDIOC_S_CTRL
+	   is it allowed for backwards compatibility.
+	 */
+	if (!allow_priv && c->ctrl_class == V4L2_CID_PRIVATE_BASE)
+		return 0;
+	/* Check that all controls are from the same control class. */
+	for (i = 0; i < c->count; i++) {
+		if (V4L2_CTRL_ID2CLASS(c->controls[i].id) != c->ctrl_class) {
+			c->error_idx = i;
+			return 0;
+		}
+	}
+	return 1;
+}
+
+static int check_fmt(const struct v4l2_ioctl_ops *ops, enum v4l2_buf_type type)
+{
+	if (ops == NULL)
+		return -EINVAL;
+
+	switch (type) {
+	case V4L2_BUF_TYPE_VIDEO_CAPTURE:
+		if (ops->vidioc_try_fmt_vid_cap)
+			return 0;
+		break;
+	case V4L2_BUF_TYPE_VIDEO_OVERLAY:
+		if (ops->vidioc_try_fmt_vid_overlay)
+			return 0;
+		break;
+	case V4L2_BUF_TYPE_VIDEO_OUTPUT:
+		if (ops->vidioc_try_fmt_vid_out)
+			return 0;
+		break;
+	case V4L2_BUF_TYPE_VIDEO_OUTPUT_OVERLAY:
+		if (ops->vidioc_try_fmt_vid_out_overlay)
+			return 0;
+		break;
+	case V4L2_BUF_TYPE_VBI_CAPTURE:
+		if (ops->vidioc_try_fmt_vbi_cap)
+			return 0;
+		break;
+	case V4L2_BUF_TYPE_VBI_OUTPUT:
+		if (ops->vidioc_try_fmt_vbi_out)
+			return 0;
+		break;
+	case V4L2_BUF_TYPE_SLICED_VBI_CAPTURE:
+		if (ops->vidioc_try_fmt_sliced_vbi_cap)
+			return 0;
+		break;
+	case V4L2_BUF_TYPE_SLICED_VBI_OUTPUT:
+		if (ops->vidioc_try_fmt_sliced_vbi_out)
+			return 0;
+		break;
+	case V4L2_BUF_TYPE_PRIVATE:
+		if (ops->vidioc_try_fmt_type_private)
+			return 0;
+		break;
+	}
+	return -EINVAL;
+}
+
+static int __video_do_ioctl(struct inode *inode, struct file *file,
+		unsigned int cmd, void *arg)
+{
+	struct video_device *vfd = video_devdata(file);
+	const struct v4l2_ioctl_ops *ops = vfd->ioctl_ops;
+	void                 *fh = file->private_data;
+	int                  ret = -EINVAL;
+
+	if ((vfd->debug & V4L2_DEBUG_IOCTL) &&
+				!(vfd->debug & V4L2_DEBUG_IOCTL_ARG)) {
+		v4l_print_ioctl(vfd->name, cmd);
+		printk(KERN_CONT "\n");
+	}
+
+	if (ops == NULL) {
+		printk(KERN_WARNING "videodev: \"%s\" has no ioctl_ops.\n",
+				vfd->name);
+		return -EINVAL;
+	}
+
+#ifdef CONFIG_VIDEO_V4L1_COMPAT
+	/***********************************************************
+	 Handles calls to the obsoleted V4L1 API
+	 Due to the nature of VIDIOCGMBUF, each driver that supports
+	 V4L1 should implement its own handler for this ioctl.
+	 ***********************************************************/
+
+	/* --- streaming capture ------------------------------------- */
+	if (cmd == VIDIOCGMBUF) {
+		struct video_mbuf *p = arg;
+
+		memset(p, 0, sizeof(*p));
+
+		if (!ops->vidiocgmbuf)
+			return ret;
+		ret = ops->vidiocgmbuf(file, fh, p);
+		if (!ret)
+			dbgarg(cmd, "size=%d, frames=%d, offsets=0x%08lx\n",
+						p->size, p->frames,
+						(unsigned long)p->offsets);
+		return ret;
+	}
+
+	/********************************************************
+	 All other V4L1 calls are handled by v4l1_compat module.
+	 Those calls will be translated into V4L2 calls, and
+	 __video_do_ioctl will be called again, with one or more
+	 V4L2 ioctls.
+	 ********************************************************/
+	if (_IOC_TYPE(cmd) == 'v')
+		return v4l_compat_translate_ioctl(inode, file, cmd, arg,
+						__video_do_ioctl);
+#endif
+
+	switch (cmd) {
+	/* --- capabilities ------------------------------------------ */
+	case VIDIOC_QUERYCAP:
+	{
+		struct v4l2_capability *cap = (struct v4l2_capability *)arg;
+		memset(cap, 0, sizeof(*cap));
+
+		if (!ops->vidioc_querycap)
+			break;
+
+		ret = ops->vidioc_querycap(file, fh, cap);
+		if (!ret)
+			dbgarg(cmd, "driver=%s, card=%s, bus=%s, "
+					"version=0x%08x, "
+					"capabilities=0x%08x\n",
+					cap->driver, cap->card, cap->bus_info,
+					cap->version,
+					cap->capabilities);
+		break;
+	}
+
+	/* --- priority ------------------------------------------ */
+	case VIDIOC_G_PRIORITY:
+	{
+		enum v4l2_priority *p = arg;
+
+		if (!ops->vidioc_g_priority)
+			break;
+		ret = ops->vidioc_g_priority(file, fh, p);
+		if (!ret)
+			dbgarg(cmd, "priority is %d\n", *p);
+		break;
+	}
+	case VIDIOC_S_PRIORITY:
+	{
+		enum v4l2_priority *p = arg;
+
+		if (!ops->vidioc_s_priority)
+			break;
+		dbgarg(cmd, "setting priority to %d\n", *p);
+		ret = ops->vidioc_s_priority(file, fh, *p);
+		break;
+	}
+
+	/* --- capture ioctls ---------------------------------------- */
+	case VIDIOC_ENUM_FMT:
+	{
+		struct v4l2_fmtdesc *f = arg;
+		enum v4l2_buf_type type;
+		unsigned int index;
+
+		index = f->index;
+		type  = f->type;
+		memset(f, 0, sizeof(*f));
+		f->index = index;
+		f->type  = type;
+
+		switch (type) {
+		case V4L2_BUF_TYPE_VIDEO_CAPTURE:
+			if (ops->vidioc_enum_fmt_vid_cap)
+				ret = ops->vidioc_enum_fmt_vid_cap(file, fh, f);
+			break;
+		case V4L2_BUF_TYPE_VIDEO_OVERLAY:
+			if (ops->vidioc_enum_fmt_vid_overlay)
+				ret = ops->vidioc_enum_fmt_vid_overlay(file,
+					fh, f);
+			break;
+#if 1
+		/* V4L2_BUF_TYPE_VBI_CAPTURE should not support VIDIOC_ENUM_FMT
+		 * according to the spec. The bttv and saa7134 drivers support
+		 * it though, so just warn that this is deprecated and will be
+		 * removed in the near future. */
+		case V4L2_BUF_TYPE_VBI_CAPTURE:
+			if (ops->vidioc_enum_fmt_vbi_cap) {
+				printk(KERN_WARNING "vidioc_enum_fmt_vbi_cap will be removed in 2.6.28!\n");
+				ret = ops->vidioc_enum_fmt_vbi_cap(file, fh, f);
+			}
+			break;
+#endif
+		case V4L2_BUF_TYPE_VIDEO_OUTPUT:
+			if (ops->vidioc_enum_fmt_vid_out)
+				ret = ops->vidioc_enum_fmt_vid_out(file, fh, f);
+			break;
+		case V4L2_BUF_TYPE_PRIVATE:
+			if (ops->vidioc_enum_fmt_type_private)
+				ret = ops->vidioc_enum_fmt_type_private(file,
+								fh, f);
+			break;
+		default:
+			break;
+		}
+		if (!ret)
+			dbgarg(cmd, "index=%d, type=%d, flags=%d, "
+				"pixelformat=%c%c%c%c, description='%s'\n",
+				f->index, f->type, f->flags,
+				(f->pixelformat & 0xff),
+				(f->pixelformat >>  8) & 0xff,
+				(f->pixelformat >> 16) & 0xff,
+				(f->pixelformat >> 24) & 0xff,
+				f->description);
+		break;
+	}
+	case VIDIOC_G_FMT:
+	{
+		struct v4l2_format *f = (struct v4l2_format *)arg;
+
+		memset(f->fmt.raw_data, 0, sizeof(f->fmt.raw_data));
+
+		/* FIXME: Should be one dump per type */
+		dbgarg(cmd, "type=%s\n", prt_names(f->type, v4l2_type_names));
+
+		switch (f->type) {
+		case V4L2_BUF_TYPE_VIDEO_CAPTURE:
+			if (ops->vidioc_g_fmt_vid_cap)
+				ret = ops->vidioc_g_fmt_vid_cap(file, fh, f);
+			if (!ret)
+				v4l_print_pix_fmt(vfd, &f->fmt.pix);
+			break;
+		case V4L2_BUF_TYPE_VIDEO_OVERLAY:
+			if (ops->vidioc_g_fmt_vid_overlay)
+				ret = ops->vidioc_g_fmt_vid_overlay(file,
+								    fh, f);
+			break;
+		case V4L2_BUF_TYPE_VIDEO_OUTPUT:
+			if (ops->vidioc_g_fmt_vid_out)
+				ret = ops->vidioc_g_fmt_vid_out(file, fh, f);
+			if (!ret)
+				v4l_print_pix_fmt(vfd, &f->fmt.pix);
+			break;
+		case V4L2_BUF_TYPE_VIDEO_OUTPUT_OVERLAY:
+			if (ops->vidioc_g_fmt_vid_out_overlay)
+				ret = ops->vidioc_g_fmt_vid_out_overlay(file,
+				       fh, f);
+			break;
+		case V4L2_BUF_TYPE_VBI_CAPTURE:
+			if (ops->vidioc_g_fmt_vbi_cap)
+				ret = ops->vidioc_g_fmt_vbi_cap(file, fh, f);
+			break;
+		case V4L2_BUF_TYPE_VBI_OUTPUT:
+			if (ops->vidioc_g_fmt_vbi_out)
+				ret = ops->vidioc_g_fmt_vbi_out(file, fh, f);
+			break;
+		case V4L2_BUF_TYPE_SLICED_VBI_CAPTURE:
+			if (ops->vidioc_g_fmt_sliced_vbi_cap)
+				ret = ops->vidioc_g_fmt_sliced_vbi_cap(file,
+									fh, f);
+			break;
+		case V4L2_BUF_TYPE_SLICED_VBI_OUTPUT:
+			if (ops->vidioc_g_fmt_sliced_vbi_out)
+				ret = ops->vidioc_g_fmt_sliced_vbi_out(file,
+									fh, f);
+			break;
+		case V4L2_BUF_TYPE_PRIVATE:
+			if (ops->vidioc_g_fmt_type_private)
+				ret = ops->vidioc_g_fmt_type_private(file,
+								fh, f);
+			break;
+		}
+
+		break;
+	}
+	case VIDIOC_S_FMT:
+	{
+		struct v4l2_format *f = (struct v4l2_format *)arg;
+
+		/* FIXME: Should be one dump per type */
+		dbgarg(cmd, "type=%s\n", prt_names(f->type, v4l2_type_names));
+
+		switch (f->type) {
+		case V4L2_BUF_TYPE_VIDEO_CAPTURE:
+			v4l_print_pix_fmt(vfd, &f->fmt.pix);
+			if (ops->vidioc_s_fmt_vid_cap)
+				ret = ops->vidioc_s_fmt_vid_cap(file, fh, f);
+			break;
+		case V4L2_BUF_TYPE_VIDEO_OVERLAY:
+			if (ops->vidioc_s_fmt_vid_overlay)
+				ret = ops->vidioc_s_fmt_vid_overlay(file,
+								    fh, f);
+			break;
+		case V4L2_BUF_TYPE_VIDEO_OUTPUT:
+			v4l_print_pix_fmt(vfd, &f->fmt.pix);
+			if (ops->vidioc_s_fmt_vid_out)
+				ret = ops->vidioc_s_fmt_vid_out(file, fh, f);
+			break;
+		case V4L2_BUF_TYPE_VIDEO_OUTPUT_OVERLAY:
+			if (ops->vidioc_s_fmt_vid_out_overlay)
+				ret = ops->vidioc_s_fmt_vid_out_overlay(file,
+					fh, f);
+			break;
+		case V4L2_BUF_TYPE_VBI_CAPTURE:
+			if (ops->vidioc_s_fmt_vbi_cap)
+				ret = ops->vidioc_s_fmt_vbi_cap(file, fh, f);
+			break;
+		case V4L2_BUF_TYPE_VBI_OUTPUT:
+			if (ops->vidioc_s_fmt_vbi_out)
+				ret = ops->vidioc_s_fmt_vbi_out(file, fh, f);
+			break;
+		case V4L2_BUF_TYPE_SLICED_VBI_CAPTURE:
+			if (ops->vidioc_s_fmt_sliced_vbi_cap)
+				ret = ops->vidioc_s_fmt_sliced_vbi_cap(file,
+									fh, f);
+			break;
+		case V4L2_BUF_TYPE_SLICED_VBI_OUTPUT:
+			if (ops->vidioc_s_fmt_sliced_vbi_out)
+				ret = ops->vidioc_s_fmt_sliced_vbi_out(file,
+									fh, f);
+			break;
+		case V4L2_BUF_TYPE_PRIVATE:
+			if (ops->vidioc_s_fmt_type_private)
+				ret = ops->vidioc_s_fmt_type_private(file,
+								fh, f);
+			break;
+		}
+		break;
+	}
+	case VIDIOC_TRY_FMT:
+	{
+		struct v4l2_format *f = (struct v4l2_format *)arg;
+
+		/* FIXME: Should be one dump per type */
+		dbgarg(cmd, "type=%s\n", prt_names(f->type,
+						v4l2_type_names));
+		switch (f->type) {
+		case V4L2_BUF_TYPE_VIDEO_CAPTURE:
+			if (ops->vidioc_try_fmt_vid_cap)
+				ret = ops->vidioc_try_fmt_vid_cap(file, fh, f);
+			if (!ret)
+				v4l_print_pix_fmt(vfd, &f->fmt.pix);
+			break;
+		case V4L2_BUF_TYPE_VIDEO_OVERLAY:
+			if (ops->vidioc_try_fmt_vid_overlay)
+				ret = ops->vidioc_try_fmt_vid_overlay(file,
+					fh, f);
+			break;
+		case V4L2_BUF_TYPE_VIDEO_OUTPUT:
+			if (ops->vidioc_try_fmt_vid_out)
+				ret = ops->vidioc_try_fmt_vid_out(file, fh, f);
+			if (!ret)
+				v4l_print_pix_fmt(vfd, &f->fmt.pix);
+			break;
+		case V4L2_BUF_TYPE_VIDEO_OUTPUT_OVERLAY:
+			if (ops->vidioc_try_fmt_vid_out_overlay)
+				ret = ops->vidioc_try_fmt_vid_out_overlay(file,
+				       fh, f);
+			break;
+		case V4L2_BUF_TYPE_VBI_CAPTURE:
+			if (ops->vidioc_try_fmt_vbi_cap)
+				ret = ops->vidioc_try_fmt_vbi_cap(file, fh, f);
+			break;
+		case V4L2_BUF_TYPE_VBI_OUTPUT:
+			if (ops->vidioc_try_fmt_vbi_out)
+				ret = ops->vidioc_try_fmt_vbi_out(file, fh, f);
+			break;
+		case V4L2_BUF_TYPE_SLICED_VBI_CAPTURE:
+			if (ops->vidioc_try_fmt_sliced_vbi_cap)
+				ret = ops->vidioc_try_fmt_sliced_vbi_cap(file,
+								fh, f);
+			break;
+		case V4L2_BUF_TYPE_SLICED_VBI_OUTPUT:
+			if (ops->vidioc_try_fmt_sliced_vbi_out)
+				ret = ops->vidioc_try_fmt_sliced_vbi_out(file,
+								fh, f);
+			break;
+		case V4L2_BUF_TYPE_PRIVATE:
+			if (ops->vidioc_try_fmt_type_private)
+				ret = ops->vidioc_try_fmt_type_private(file,
+								fh, f);
+			break;
+		}
+
+		break;
+	}
+	/* FIXME: Those buf reqs could be handled here,
+	   with some changes on videobuf to allow its header to be included at
+	   videodev2.h or being merged at videodev2.
+	 */
+	case VIDIOC_REQBUFS:
+	{
+		struct v4l2_requestbuffers *p = arg;
+
+		if (!ops->vidioc_reqbufs)
+			break;
+		ret = check_fmt(ops, p->type);
+		if (ret)
+			break;
+
+		ret = ops->vidioc_reqbufs(file, fh, p);
+		dbgarg(cmd, "count=%d, type=%s, memory=%s\n",
+				p->count,
+				prt_names(p->type, v4l2_type_names),
+				prt_names(p->memory, v4l2_memory_names));
+		break;
+	}
+	case VIDIOC_QUERYBUF:
+	{
+		struct v4l2_buffer *p = arg;
+
+		if (!ops->vidioc_querybuf)
+			break;
+		ret = check_fmt(ops, p->type);
+		if (ret)
+			break;
+
+		ret = ops->vidioc_querybuf(file, fh, p);
+		if (!ret)
+			dbgbuf(cmd, vfd, p);
+		break;
+	}
+	case VIDIOC_QBUF:
+	{
+		struct v4l2_buffer *p = arg;
+
+		if (!ops->vidioc_qbuf)
+			break;
+		ret = check_fmt(ops, p->type);
+		if (ret)
+			break;
+
+		ret = ops->vidioc_qbuf(file, fh, p);
+		if (!ret)
+			dbgbuf(cmd, vfd, p);
+		break;
+	}
+	case VIDIOC_DQBUF:
+	{
+		struct v4l2_buffer *p = arg;
+
+		if (!ops->vidioc_dqbuf)
+			break;
+		ret = check_fmt(ops, p->type);
+		if (ret)
+			break;
+
+		ret = ops->vidioc_dqbuf(file, fh, p);
+		if (!ret)
+			dbgbuf(cmd, vfd, p);
+		break;
+	}
+	case VIDIOC_OVERLAY:
+	{
+		int *i = arg;
+
+		if (!ops->vidioc_overlay)
+			break;
+		dbgarg(cmd, "value=%d\n", *i);
+		ret = ops->vidioc_overlay(file, fh, *i);
+		break;
+	}
+	case VIDIOC_G_FBUF:
+	{
+		struct v4l2_framebuffer *p = arg;
+
+		if (!ops->vidioc_g_fbuf)
+			break;
+		ret = ops->vidioc_g_fbuf(file, fh, arg);
+		if (!ret) {
+			dbgarg(cmd, "capability=0x%x, flags=%d, base=0x%08lx\n",
+					p->capability, p->flags,
+					(unsigned long)p->base);
+			v4l_print_pix_fmt(vfd, &p->fmt);
+		}
+		break;
+	}
+	case VIDIOC_S_FBUF:
+	{
+		struct v4l2_framebuffer *p = arg;
+
+		if (!ops->vidioc_s_fbuf)
+			break;
+		dbgarg(cmd, "capability=0x%x, flags=%d, base=0x%08lx\n",
+			p->capability, p->flags, (unsigned long)p->base);
+		v4l_print_pix_fmt(vfd, &p->fmt);
+		ret = ops->vidioc_s_fbuf(file, fh, arg);
+		break;
+	}
+	case VIDIOC_STREAMON:
+	{
+		enum v4l2_buf_type i = *(int *)arg;
+
+		if (!ops->vidioc_streamon)
+			break;
+		dbgarg(cmd, "type=%s\n", prt_names(i, v4l2_type_names));
+		ret = ops->vidioc_streamon(file, fh, i);
+		break;
+	}
+	case VIDIOC_STREAMOFF:
+	{
+		enum v4l2_buf_type i = *(int *)arg;
+
+		if (!ops->vidioc_streamoff)
+			break;
+		dbgarg(cmd, "type=%s\n", prt_names(i, v4l2_type_names));
+		ret = ops->vidioc_streamoff(file, fh, i);
+		break;
+	}
+	/* ---------- tv norms ---------- */
+	case VIDIOC_ENUMSTD:
+	{
+		struct v4l2_standard *p = arg;
+		v4l2_std_id id = vfd->tvnorms, curr_id = 0;
+		unsigned int index = p->index, i, j = 0;
+		const char *descr = "";
+
+		/* Return norm array in a canonical way */
+		for (i = 0; i <= index && id; i++) {
+			/* last std value in the standards array is 0, so this
+			   while always ends there since (id & 0) == 0. */
+			while ((id & standards[j].std) != standards[j].std)
+				j++;
+			curr_id = standards[j].std;
+			descr = standards[j].descr;
+			j++;
+			if (curr_id == 0)
+				break;
+			if (curr_id != V4L2_STD_PAL &&
+			    curr_id != V4L2_STD_SECAM &&
+			    curr_id != V4L2_STD_NTSC)
+				id &= ~curr_id;
+		}
+		if (i <= index)
+			return -EINVAL;
+
+		v4l2_video_std_construct(p, curr_id, descr);
+		p->index = index;
+
+		dbgarg(cmd, "index=%d, id=0x%Lx, name=%s, fps=%d/%d, "
+				"framelines=%d\n", p->index,
+				(unsigned long long)p->id, p->name,
+				p->frameperiod.numerator,
+				p->frameperiod.denominator,
+				p->framelines);
+
+		ret = 0;
+		break;
+	}
+	case VIDIOC_G_STD:
+	{
+		v4l2_std_id *id = arg;
+
+		ret = 0;
+		/* Calls the specific handler */
+		if (ops->vidioc_g_std)
+			ret = ops->vidioc_g_std(file, fh, id);
+		else
+			*id = vfd->current_norm;
+
+		if (!ret)
+			dbgarg(cmd, "std=0x%08Lx\n", (long long unsigned)*id);
+		break;
+	}
+	case VIDIOC_S_STD:
+	{
+		v4l2_std_id *id = arg, norm;
+
+		dbgarg(cmd, "std=%08Lx\n", (long long unsigned)*id);
+
+		norm = (*id) & vfd->tvnorms;
+		if (vfd->tvnorms && !norm)	/* Check if std is supported */
+			break;
+
+		/* Calls the specific handler */
+		if (ops->vidioc_s_std)
+			ret = ops->vidioc_s_std(file, fh, &norm);
+		else
+			ret = -EINVAL;
+
+		/* Updates standard information */
+		if (ret >= 0)
+			vfd->current_norm = norm;
+		break;
+	}
+	case VIDIOC_QUERYSTD:
+	{
+		v4l2_std_id *p = arg;
+
+		if (!ops->vidioc_querystd)
+			break;
+		ret = ops->vidioc_querystd(file, fh, arg);
+		if (!ret)
+			dbgarg(cmd, "detected std=%08Lx\n",
+						(unsigned long long)*p);
+		break;
+	}
+	/* ------ input switching ---------- */
+	/* FIXME: Inputs can be handled inside videodev2 */
+	case VIDIOC_ENUMINPUT:
+	{
+		struct v4l2_input *p = arg;
+		int i = p->index;
+
+		if (!ops->vidioc_enum_input)
+			break;
+		memset(p, 0, sizeof(*p));
+		p->index = i;
+
+		ret = ops->vidioc_enum_input(file, fh, p);
+		if (!ret)
+			dbgarg(cmd, "index=%d, name=%s, type=%d, "
+				"audioset=%d, "
+				"tuner=%d, std=%08Lx, status=%d\n",
+				p->index, p->name, p->type, p->audioset,
+				p->tuner,
+				(unsigned long long)p->std,
+				p->status);
+		break;
+	}
+	case VIDIOC_G_INPUT:
+	{
+		unsigned int *i = arg;
+
+		if (!ops->vidioc_g_input)
+			break;
+		ret = ops->vidioc_g_input(file, fh, i);
+		if (!ret)
+			dbgarg(cmd, "value=%d\n", *i);
+		break;
+	}
+	case VIDIOC_S_INPUT:
+	{
+		unsigned int *i = arg;
+
+		if (!ops->vidioc_s_input)
+			break;
+		dbgarg(cmd, "value=%d\n", *i);
+		ret = ops->vidioc_s_input(file, fh, *i);
+		break;
+	}
+
+	/* ------ output switching ---------- */
+	case VIDIOC_ENUMOUTPUT:
+	{
+		struct v4l2_output *p = arg;
+		int i = p->index;
+
+		if (!ops->vidioc_enum_output)
+			break;
+		memset(p, 0, sizeof(*p));
+		p->index = i;
+
+		ret = ops->vidioc_enum_output(file, fh, p);
+		if (!ret)
+			dbgarg(cmd, "index=%d, name=%s, type=%d, "
+				"audioset=0x%x, "
+				"modulator=%d, std=0x%08Lx\n",
+				p->index, p->name, p->type, p->audioset,
+				p->modulator, (unsigned long long)p->std);
+		break;
+	}
+	case VIDIOC_G_OUTPUT:
+	{
+		unsigned int *i = arg;
+
+		if (!ops->vidioc_g_output)
+			break;
+		ret = ops->vidioc_g_output(file, fh, i);
+		if (!ret)
+			dbgarg(cmd, "value=%d\n", *i);
+		break;
+	}
+	case VIDIOC_S_OUTPUT:
+	{
+		unsigned int *i = arg;
+
+		if (!ops->vidioc_s_output)
+			break;
+		dbgarg(cmd, "value=%d\n", *i);
+		ret = ops->vidioc_s_output(file, fh, *i);
+		break;
+	}
+
+	/* --- controls ---------------------------------------------- */
+	case VIDIOC_QUERYCTRL:
+	{
+		struct v4l2_queryctrl *p = arg;
+
+		if (!ops->vidioc_queryctrl)
+			break;
+		ret = ops->vidioc_queryctrl(file, fh, p);
+		if (!ret)
+			dbgarg(cmd, "id=0x%x, type=%d, name=%s, min/max=%d/%d, "
+					"step=%d, default=%d, flags=0x%08x\n",
+					p->id, p->type, p->name,
+					p->minimum, p->maximum,
+					p->step, p->default_value, p->flags);
+		else
+			dbgarg(cmd, "id=0x%x\n", p->id);
+		break;
+	}
+	case VIDIOC_G_CTRL:
+	{
+		struct v4l2_control *p = arg;
+
+		if (ops->vidioc_g_ctrl)
+			ret = ops->vidioc_g_ctrl(file, fh, p);
+		else if (ops->vidioc_g_ext_ctrls) {
+			struct v4l2_ext_controls ctrls;
+			struct v4l2_ext_control ctrl;
+
+			ctrls.ctrl_class = V4L2_CTRL_ID2CLASS(p->id);
+			ctrls.count = 1;
+			ctrls.controls = &ctrl;
+			ctrl.id = p->id;
+			ctrl.value = p->value;
+			if (check_ext_ctrls(&ctrls, 1)) {
+				ret = ops->vidioc_g_ext_ctrls(file, fh, &ctrls);
+				if (ret == 0)
+					p->value = ctrl.value;
+			}
+		} else
+			break;
+		if (!ret)
+			dbgarg(cmd, "id=0x%x, value=%d\n", p->id, p->value);
+		else
+			dbgarg(cmd, "id=0x%x\n", p->id);
+		break;
+	}
+	case VIDIOC_S_CTRL:
+	{
+		struct v4l2_control *p = arg;
+		struct v4l2_ext_controls ctrls;
+		struct v4l2_ext_control ctrl;
+
+		if (!ops->vidioc_s_ctrl && !ops->vidioc_s_ext_ctrls)
+			break;
+
+		dbgarg(cmd, "id=0x%x, value=%d\n", p->id, p->value);
+
+		if (ops->vidioc_s_ctrl) {
+			ret = ops->vidioc_s_ctrl(file, fh, p);
+			break;
+		}
+		if (!ops->vidioc_s_ext_ctrls)
+			break;
+
+		ctrls.ctrl_class = V4L2_CTRL_ID2CLASS(p->id);
+		ctrls.count = 1;
+		ctrls.controls = &ctrl;
+		ctrl.id = p->id;
+		ctrl.value = p->value;
+		if (check_ext_ctrls(&ctrls, 1))
+			ret = ops->vidioc_s_ext_ctrls(file, fh, &ctrls);
+		break;
+	}
+	case VIDIOC_G_EXT_CTRLS:
+	{
+		struct v4l2_ext_controls *p = arg;
+
+		p->error_idx = p->count;
+		if (!ops->vidioc_g_ext_ctrls)
+			break;
+		if (check_ext_ctrls(p, 0))
+			ret = ops->vidioc_g_ext_ctrls(file, fh, p);
+		v4l_print_ext_ctrls(cmd, vfd, p, !ret);
+		break;
+	}
+	case VIDIOC_S_EXT_CTRLS:
+	{
+		struct v4l2_ext_controls *p = arg;
+
+		p->error_idx = p->count;
+		if (!ops->vidioc_s_ext_ctrls)
+			break;
+		v4l_print_ext_ctrls(cmd, vfd, p, 1);
+		if (check_ext_ctrls(p, 0))
+			ret = ops->vidioc_s_ext_ctrls(file, fh, p);
+		break;
+	}
+	case VIDIOC_TRY_EXT_CTRLS:
+	{
+		struct v4l2_ext_controls *p = arg;
+
+		p->error_idx = p->count;
+		if (!ops->vidioc_try_ext_ctrls)
+			break;
+		v4l_print_ext_ctrls(cmd, vfd, p, 1);
+		if (check_ext_ctrls(p, 0))
+			ret = ops->vidioc_try_ext_ctrls(file, fh, p);
+		break;
+	}
+	case VIDIOC_QUERYMENU:
+	{
+		struct v4l2_querymenu *p = arg;
+
+		if (!ops->vidioc_querymenu)
+			break;
+		ret = ops->vidioc_querymenu(file, fh, p);
+		if (!ret)
+			dbgarg(cmd, "id=0x%x, index=%d, name=%s\n",
+				p->id, p->index, p->name);
+		else
+			dbgarg(cmd, "id=0x%x, index=%d\n",
+				p->id, p->index);
+		break;
+	}
+	/* --- audio ---------------------------------------------- */
+	case VIDIOC_ENUMAUDIO:
+	{
+		struct v4l2_audio *p = arg;
+
+		if (!ops->vidioc_enumaudio)
+			break;
+		ret = ops->vidioc_enumaudio(file, fh, p);
+		if (!ret)
+			dbgarg(cmd, "index=%d, name=%s, capability=0x%x, "
+					"mode=0x%x\n", p->index, p->name,
+					p->capability, p->mode);
+		else
+			dbgarg(cmd, "index=%d\n", p->index);
+		break;
+	}
+	case VIDIOC_G_AUDIO:
+	{
+		struct v4l2_audio *p = arg;
+		__u32 index = p->index;
+
+		if (!ops->vidioc_g_audio)
+			break;
+
+		memset(p, 0, sizeof(*p));
+		p->index = index;
+		ret = ops->vidioc_g_audio(file, fh, p);
+		if (!ret)
+			dbgarg(cmd, "index=%d, name=%s, capability=0x%x, "
+					"mode=0x%x\n", p->index,
+					p->name, p->capability, p->mode);
+		else
+			dbgarg(cmd, "index=%d\n", p->index);
+		break;
+	}
+	case VIDIOC_S_AUDIO:
+	{
+		struct v4l2_audio *p = arg;
+
+		if (!ops->vidioc_s_audio)
+			break;
+		dbgarg(cmd, "index=%d, name=%s, capability=0x%x, "
+					"mode=0x%x\n", p->index, p->name,
+					p->capability, p->mode);
+		ret = ops->vidioc_s_audio(file, fh, p);
+		break;
+	}
+	case VIDIOC_ENUMAUDOUT:
+	{
+		struct v4l2_audioout *p = arg;
+
+		if (!ops->vidioc_enumaudout)
+			break;
+		dbgarg(cmd, "Enum for index=%d\n", p->index);
+		ret = ops->vidioc_enumaudout(file, fh, p);
+		if (!ret)
+			dbgarg2("index=%d, name=%s, capability=%d, "
+					"mode=%d\n", p->index, p->name,
+					p->capability, p->mode);
+		break;
+	}
+	case VIDIOC_G_AUDOUT:
+	{
+		struct v4l2_audioout *p = arg;
+
+		if (!ops->vidioc_g_audout)
+			break;
+		dbgarg(cmd, "Enum for index=%d\n", p->index);
+		ret = ops->vidioc_g_audout(file, fh, p);
+		if (!ret)
+			dbgarg2("index=%d, name=%s, capability=%d, "
+					"mode=%d\n", p->index, p->name,
+					p->capability, p->mode);
+		break;
+	}
+	case VIDIOC_S_AUDOUT:
+	{
+		struct v4l2_audioout *p = arg;
+
+		if (!ops->vidioc_s_audout)
+			break;
+		dbgarg(cmd, "index=%d, name=%s, capability=%d, "
+					"mode=%d\n", p->index, p->name,
+					p->capability, p->mode);
+
+		ret = ops->vidioc_s_audout(file, fh, p);
+		break;
+	}
+	case VIDIOC_G_MODULATOR:
+	{
+		struct v4l2_modulator *p = arg;
+
+		if (!ops->vidioc_g_modulator)
+			break;
+		ret = ops->vidioc_g_modulator(file, fh, p);
+		if (!ret)
+			dbgarg(cmd, "index=%d, name=%s, "
+					"capability=%d, rangelow=%d,"
+					" rangehigh=%d, txsubchans=%d\n",
+					p->index, p->name, p->capability,
+					p->rangelow, p->rangehigh,
+					p->txsubchans);
+		break;
+	}
+	case VIDIOC_S_MODULATOR:
+	{
+		struct v4l2_modulator *p = arg;
+
+		if (!ops->vidioc_s_modulator)
+			break;
+		dbgarg(cmd, "index=%d, name=%s, capability=%d, "
+				"rangelow=%d, rangehigh=%d, txsubchans=%d\n",
+				p->index, p->name, p->capability, p->rangelow,
+				p->rangehigh, p->txsubchans);
+			ret = ops->vidioc_s_modulator(file, fh, p);
+		break;
+	}
+	case VIDIOC_G_CROP:
+	{
+		struct v4l2_crop *p = arg;
+
+		if (!ops->vidioc_g_crop)
+			break;
+		dbgarg(cmd, "type=%s\n", prt_names(p->type, v4l2_type_names));
+		ret = ops->vidioc_g_crop(file, fh, p);
+		if (!ret)
+			dbgrect(vfd, "", &p->c);
+		break;
+	}
+	case VIDIOC_S_CROP:
+	{
+		struct v4l2_crop *p = arg;
+
+		if (!ops->vidioc_s_crop)
+			break;
+		dbgarg(cmd, "type=%s\n", prt_names(p->type, v4l2_type_names));
+		dbgrect(vfd, "", &p->c);
+		ret = ops->vidioc_s_crop(file, fh, p);
+		break;
+	}
+	case VIDIOC_CROPCAP:
+	{
+		struct v4l2_cropcap *p = arg;
+
+		/*FIXME: Should also show v4l2_fract pixelaspect */
+		if (!ops->vidioc_cropcap)
+			break;
+		dbgarg(cmd, "type=%s\n", prt_names(p->type, v4l2_type_names));
+		ret = ops->vidioc_cropcap(file, fh, p);
+		if (!ret) {
+			dbgrect(vfd, "bounds ", &p->bounds);
+			dbgrect(vfd, "defrect ", &p->defrect);
+		}
+		break;
+	}
+	case VIDIOC_G_JPEGCOMP:
+	{
+		struct v4l2_jpegcompression *p = arg;
+
+		if (!ops->vidioc_g_jpegcomp)
+			break;
+		ret = ops->vidioc_g_jpegcomp(file, fh, p);
+		if (!ret)
+			dbgarg(cmd, "quality=%d, APPn=%d, "
+					"APP_len=%d, COM_len=%d, "
+					"jpeg_markers=%d\n",
+					p->quality, p->APPn, p->APP_len,
+					p->COM_len, p->jpeg_markers);
+		break;
+	}
+	case VIDIOC_S_JPEGCOMP:
+	{
+		struct v4l2_jpegcompression *p = arg;
+
+		if (!ops->vidioc_g_jpegcomp)
+			break;
+		dbgarg(cmd, "quality=%d, APPn=%d, APP_len=%d, "
+					"COM_len=%d, jpeg_markers=%d\n",
+					p->quality, p->APPn, p->APP_len,
+					p->COM_len, p->jpeg_markers);
+			ret = ops->vidioc_s_jpegcomp(file, fh, p);
+		break;
+	}
+	case VIDIOC_G_ENC_INDEX:
+	{
+		struct v4l2_enc_idx *p = arg;
+
+		if (!ops->vidioc_g_enc_index)
+			break;
+		ret = ops->vidioc_g_enc_index(file, fh, p);
+		if (!ret)
+			dbgarg(cmd, "entries=%d, entries_cap=%d\n",
+					p->entries, p->entries_cap);
+		break;
+	}
+	case VIDIOC_ENCODER_CMD:
+	{
+		struct v4l2_encoder_cmd *p = arg;
+
+		if (!ops->vidioc_encoder_cmd)
+			break;
+		memset(&p->raw, 0, sizeof(p->raw));
+		ret = ops->vidioc_encoder_cmd(file, fh, p);
+		if (!ret)
+			dbgarg(cmd, "cmd=%d, flags=%x\n", p->cmd, p->flags);
+		break;
+	}
+	case VIDIOC_TRY_ENCODER_CMD:
+	{
+		struct v4l2_encoder_cmd *p = arg;
+
+		if (!ops->vidioc_try_encoder_cmd)
+			break;
+		memset(&p->raw, 0, sizeof(p->raw));
+		ret = ops->vidioc_try_encoder_cmd(file, fh, p);
+		if (!ret)
+			dbgarg(cmd, "cmd=%d, flags=%x\n", p->cmd, p->flags);
+		break;
+	}
+	case VIDIOC_G_PARM:
+	{
+		struct v4l2_streamparm *p = arg;
+		__u32 type = p->type;
+
+		memset(p, 0, sizeof(*p));
+		p->type = type;
+
+		if (ops->vidioc_g_parm) {
+			ret = ops->vidioc_g_parm(file, fh, p);
+		} else {
+			struct v4l2_standard s;
+
+			if (p->type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
+				return -EINVAL;
+
+			v4l2_video_std_construct(&s, vfd->current_norm,
+						 v4l2_norm_to_name(vfd->current_norm));
+
+			p->parm.capture.timeperframe = s.frameperiod;
+			ret = 0;
+		}
+
+		dbgarg(cmd, "type=%d\n", p->type);
+		break;
+	}
+	case VIDIOC_S_PARM:
+	{
+		struct v4l2_streamparm *p = arg;
+
+		if (!ops->vidioc_s_parm)
+			break;
+		dbgarg(cmd, "type=%d\n", p->type);
+		ret = ops->vidioc_s_parm(file, fh, p);
+		break;
+	}
+	case VIDIOC_G_TUNER:
+	{
+		struct v4l2_tuner *p = arg;
+		__u32 index = p->index;
+
+		if (!ops->vidioc_g_tuner)
+			break;
+
+		memset(p, 0, sizeof(*p));
+		p->index = index;
+
+		ret = ops->vidioc_g_tuner(file, fh, p);
+		if (!ret)
+			dbgarg(cmd, "index=%d, name=%s, type=%d, "
+					"capability=0x%x, rangelow=%d, "
+					"rangehigh=%d, signal=%d, afc=%d, "
+					"rxsubchans=0x%x, audmode=%d\n",
+					p->index, p->name, p->type,
+					p->capability, p->rangelow,
+					p->rangehigh, p->signal, p->afc,
+					p->rxsubchans, p->audmode);
+		break;
+	}
+	case VIDIOC_S_TUNER:
+	{
+		struct v4l2_tuner *p = arg;
+
+		if (!ops->vidioc_s_tuner)
+			break;
+		dbgarg(cmd, "index=%d, name=%s, type=%d, "
+				"capability=0x%x, rangelow=%d, "
+				"rangehigh=%d, signal=%d, afc=%d, "
+				"rxsubchans=0x%x, audmode=%d\n",
+				p->index, p->name, p->type,
+				p->capability, p->rangelow,
+				p->rangehigh, p->signal, p->afc,
+				p->rxsubchans, p->audmode);
+		ret = ops->vidioc_s_tuner(file, fh, p);
+		break;
+	}
+	case VIDIOC_G_FREQUENCY:
+	{
+		struct v4l2_frequency *p = arg;
+
+		if (!ops->vidioc_g_frequency)
+			break;
+
+		memset(p->reserved, 0, sizeof(p->reserved));
+
+		ret = ops->vidioc_g_frequency(file, fh, p);
+		if (!ret)
+			dbgarg(cmd, "tuner=%d, type=%d, frequency=%d\n",
+					p->tuner, p->type, p->frequency);
+		break;
+	}
+	case VIDIOC_S_FREQUENCY:
+	{
+		struct v4l2_frequency *p = arg;
+
+		if (!ops->vidioc_s_frequency)
+			break;
+		dbgarg(cmd, "tuner=%d, type=%d, frequency=%d\n",
+				p->tuner, p->type, p->frequency);
+		ret = ops->vidioc_s_frequency(file, fh, p);
+		break;
+	}
+	case VIDIOC_G_SLICED_VBI_CAP:
+	{
+		struct v4l2_sliced_vbi_cap *p = arg;
+		__u32 type = p->type;
+
+		if (!ops->vidioc_g_sliced_vbi_cap)
+			break;
+		memset(p, 0, sizeof(*p));
+		p->type = type;
+		dbgarg(cmd, "type=%s\n", prt_names(p->type, v4l2_type_names));
+		ret = ops->vidioc_g_sliced_vbi_cap(file, fh, p);
+		if (!ret)
+			dbgarg2("service_set=%d\n", p->service_set);
+		break;
+	}
+	case VIDIOC_LOG_STATUS:
+	{
+		if (!ops->vidioc_log_status)
+			break;
+		ret = ops->vidioc_log_status(file, fh);
+		break;
+	}
+#ifdef CONFIG_VIDEO_ADV_DEBUG
+	case VIDIOC_DBG_G_REGISTER:
+	{
+		struct v4l2_register *p = arg;
+
+		if (!capable(CAP_SYS_ADMIN))
+			ret = -EPERM;
+		else if (ops->vidioc_g_register)
+			ret = ops->vidioc_g_register(file, fh, p);
+		break;
+	}
+	case VIDIOC_DBG_S_REGISTER:
+	{
+		struct v4l2_register *p = arg;
+
+		if (!capable(CAP_SYS_ADMIN))
+			ret = -EPERM;
+		else if (ops->vidioc_s_register)
+			ret = ops->vidioc_s_register(file, fh, p);
+		break;
+	}
+#endif
+	case VIDIOC_G_CHIP_IDENT:
+	{
+		struct v4l2_chip_ident *p = arg;
+
+		if (!ops->vidioc_g_chip_ident)
+			break;
+		ret = ops->vidioc_g_chip_ident(file, fh, p);
+		if (!ret)
+			dbgarg(cmd, "chip_ident=%u, revision=0x%x\n", p->ident, p->revision);
+		break;
+	}
+	case VIDIOC_S_HW_FREQ_SEEK:
+	{
+		struct v4l2_hw_freq_seek *p = arg;
+
+		if (!ops->vidioc_s_hw_freq_seek)
+			break;
+		dbgarg(cmd,
+			"tuner=%d, type=%d, seek_upward=%d, wrap_around=%d\n",
+			p->tuner, p->type, p->seek_upward, p->wrap_around);
+		ret = ops->vidioc_s_hw_freq_seek(file, fh, p);
+		break;
+	}
+	default:
+	{
+		if (!ops->vidioc_default)
+			break;
+		ret = ops->vidioc_default(file, fh, cmd, arg);
+		break;
+	}
+	} /* switch */
+
+	if (vfd->debug & V4L2_DEBUG_IOCTL_ARG) {
+		if (ret < 0) {
+			v4l_print_ioctl(vfd->name, cmd);
+			printk(KERN_CONT " error %d\n", ret);
+		}
+	}
+
+	return ret;
+}
+
+int video_ioctl2(struct inode *inode, struct file *file,
+	       unsigned int cmd, unsigned long arg)
+{
+	char	sbuf[128];
+	void    *mbuf = NULL;
+	void	*parg = NULL;
+	int	err  = -EINVAL;
+	int     is_ext_ctrl;
+	size_t  ctrls_size = 0;
+	void __user *user_ptr = NULL;
+
+#ifdef __OLD_VIDIOC_
+	cmd = video_fix_command(cmd);
+#endif
+	is_ext_ctrl = (cmd == VIDIOC_S_EXT_CTRLS || cmd == VIDIOC_G_EXT_CTRLS ||
+		       cmd == VIDIOC_TRY_EXT_CTRLS);
+
+	/*  Copy arguments into temp kernel buffer  */
+	switch (_IOC_DIR(cmd)) {
+	case _IOC_NONE:
+		parg = NULL;
+		break;
+	case _IOC_READ:
+	case _IOC_WRITE:
+	case (_IOC_WRITE | _IOC_READ):
+		if (_IOC_SIZE(cmd) <= sizeof(sbuf)) {
+			parg = sbuf;
+		} else {
+			/* too big to allocate from stack */
+			mbuf = kmalloc(_IOC_SIZE(cmd), GFP_KERNEL);
+			if (NULL == mbuf)
+				return -ENOMEM;
+			parg = mbuf;
+		}
+
+		err = -EFAULT;
+		if (_IOC_DIR(cmd) & _IOC_WRITE)
+			if (copy_from_user(parg, (void __user *)arg, _IOC_SIZE(cmd)))
+				goto out;
+		break;
+	}
+
+	if (is_ext_ctrl) {
+		struct v4l2_ext_controls *p = parg;
+
+		/* In case of an error, tell the caller that it wasn't
+		   a specific control that caused it. */
+		p->error_idx = p->count;
+		user_ptr = (void __user *)p->controls;
+		if (p->count) {
+			ctrls_size = sizeof(struct v4l2_ext_control) * p->count;
+			/* Note: v4l2_ext_controls fits in sbuf[] so mbuf is still NULL. */
+			mbuf = kmalloc(ctrls_size, GFP_KERNEL);
+			err = -ENOMEM;
+			if (NULL == mbuf)
+				goto out_ext_ctrl;
+			err = -EFAULT;
+			if (copy_from_user(mbuf, user_ptr, ctrls_size))
+				goto out_ext_ctrl;
+			p->controls = mbuf;
+		}
+	}
+
+	/* Handles IOCTL */
+	err = __video_do_ioctl(inode, file, cmd, parg);
+	if (err == -ENOIOCTLCMD)
+		err = -EINVAL;
+	if (is_ext_ctrl) {
+		struct v4l2_ext_controls *p = parg;
+
+		p->controls = (void *)user_ptr;
+		if (p->count && err == 0 && copy_to_user(user_ptr, mbuf, ctrls_size))
+			err = -EFAULT;
+		goto out_ext_ctrl;
+	}
+	if (err < 0)
+		goto out;
+
+out_ext_ctrl:
+	/*  Copy results into user buffer  */
+	switch (_IOC_DIR(cmd)) {
+	case _IOC_READ:
+	case (_IOC_WRITE | _IOC_READ):
+		if (copy_to_user((void __user *)arg, parg, _IOC_SIZE(cmd)))
+			err = -EFAULT;
+		break;
+	}
+
+out:
+	kfree(mbuf);
+	return err;
+}
+EXPORT_SYMBOL(video_ioctl2);
diff --git a/drivers/media/video/videobuf-dma-contig.c b/drivers/media/video/videobuf-dma-contig.c
index 03f20acb668c..31944b11e6ea 100644
--- a/drivers/media/video/videobuf-dma-contig.c
+++ b/drivers/media/video/videobuf-dma-contig.c
@@ -28,10 +28,10 @@ struct videobuf_dma_contig_memory {
 };
 
 #define MAGIC_DC_MEM 0x0733ac61
-#define MAGIC_CHECK(is, should)						\
-	if (unlikely((is) != (should)))	{				\
-		pr_err("magic mismatch: %x expected %x\n", is, should); \
-		BUG();							\
+#define MAGIC_CHECK(is, should)						    \
+	if (unlikely((is) != (should)))	{				    \
+		pr_err("magic mismatch: %x expected %x\n", (is), (should)); \
+		BUG();							    \
 	}
 
 static void
diff --git a/drivers/media/video/videobuf-vmalloc.c b/drivers/media/video/videobuf-vmalloc.c
index a868b7ed75ff..be65a2fb3976 100644
--- a/drivers/media/video/videobuf-vmalloc.c
+++ b/drivers/media/video/videobuf-vmalloc.c
@@ -203,7 +203,7 @@ static int __videobuf_iolock (struct videobuf_queue* q,
 			return 0;
 
 		/* FIXME: to properly support USERPTR, remap should occur.
-		   The code bellow won't work, since mem->vma = NULL
+		   The code below won't work, since mem->vma = NULL
 		 */
 		/* Try to remap memory */
 		rc = remap_vmalloc_range(mem->vma, (void *)vb->baddr, 0);
diff --git a/drivers/media/video/videodev.c b/drivers/media/video/videodev.c
deleted file mode 100644
index 6616e6570557..000000000000
--- a/drivers/media/video/videodev.c
+++ /dev/null
@@ -1,2262 +0,0 @@
-/*
- * Video capture interface for Linux version 2
- *
- *	A generic video device interface for the LINUX operating system
- *	using a set of device structures/vectors for low level operations.
- *
- *	This program is free software; you can redistribute it and/or
- *	modify it under the terms of the GNU General Public License
- *	as published by the Free Software Foundation; either version
- *	2 of the License, or (at your option) any later version.
- *
- * Authors:	Alan Cox, <alan@redhat.com> (version 1)
- *              Mauro Carvalho Chehab <mchehab@infradead.org> (version 2)
- *
- * Fixes:	20000516  Claudio Matsuoka <claudio@conectiva.com>
- *		- Added procfs support
- */
-
-#define dbgarg(cmd, fmt, arg...) \
-		do {							\
-		    if (vfd->debug & V4L2_DEBUG_IOCTL_ARG) {		\
-			printk(KERN_DEBUG "%s: ",  vfd->name);		\
-			v4l_printk_ioctl(cmd);				\
-			printk(" " fmt,  ## arg);			\
-		    }							\
-		} while (0)
-
-#define dbgarg2(fmt, arg...) \
-		do {							\
-		    if (vfd->debug & V4L2_DEBUG_IOCTL_ARG)		\
-			printk(KERN_DEBUG "%s: " fmt, vfd->name, ## arg);\
-		} while (0)
-
-#include <linux/module.h>
-#include <linux/types.h>
-#include <linux/kernel.h>
-#include <linux/mm.h>
-#include <linux/string.h>
-#include <linux/errno.h>
-#include <linux/init.h>
-#include <linux/kmod.h>
-#include <linux/slab.h>
-#include <linux/smp_lock.h>
-#include <asm/uaccess.h>
-#include <asm/system.h>
-
-#define __OLD_VIDIOC_ /* To allow fixing old calls*/
-#include <linux/videodev2.h>
-
-#ifdef CONFIG_VIDEO_V4L1
-#include <linux/videodev.h>
-#endif
-#include <media/v4l2-common.h>
-#include <linux/video_decoder.h>
-
-#define VIDEO_NUM_DEVICES	256
-#define VIDEO_NAME              "video4linux"
-
-struct std_descr {
-	v4l2_std_id std;
-	const char *descr;
-};
-
-static const struct std_descr standards[] = {
-	{ V4L2_STD_NTSC, 	"NTSC"      },
-	{ V4L2_STD_NTSC_M, 	"NTSC-M"    },
-	{ V4L2_STD_NTSC_M_JP, 	"NTSC-M-JP" },
-	{ V4L2_STD_NTSC_M_KR,	"NTSC-M-KR" },
-	{ V4L2_STD_NTSC_443, 	"NTSC-443"  },
-	{ V4L2_STD_PAL, 	"PAL"       },
-	{ V4L2_STD_PAL_BG, 	"PAL-BG"    },
-	{ V4L2_STD_PAL_B, 	"PAL-B"     },
-	{ V4L2_STD_PAL_B1, 	"PAL-B1"    },
-	{ V4L2_STD_PAL_G, 	"PAL-G"     },
-	{ V4L2_STD_PAL_H, 	"PAL-H"     },
-	{ V4L2_STD_PAL_I, 	"PAL-I"     },
-	{ V4L2_STD_PAL_DK, 	"PAL-DK"    },
-	{ V4L2_STD_PAL_D, 	"PAL-D"     },
-	{ V4L2_STD_PAL_D1, 	"PAL-D1"    },
-	{ V4L2_STD_PAL_K, 	"PAL-K"     },
-	{ V4L2_STD_PAL_M, 	"PAL-M"     },
-	{ V4L2_STD_PAL_N, 	"PAL-N"     },
-	{ V4L2_STD_PAL_Nc, 	"PAL-Nc"    },
-	{ V4L2_STD_PAL_60, 	"PAL-60"    },
-	{ V4L2_STD_SECAM, 	"SECAM"     },
-	{ V4L2_STD_SECAM_B, 	"SECAM-B"   },
-	{ V4L2_STD_SECAM_G, 	"SECAM-G"   },
-	{ V4L2_STD_SECAM_H, 	"SECAM-H"   },
-	{ V4L2_STD_SECAM_DK, 	"SECAM-DK"  },
-	{ V4L2_STD_SECAM_D, 	"SECAM-D"   },
-	{ V4L2_STD_SECAM_K, 	"SECAM-K"   },
-	{ V4L2_STD_SECAM_K1, 	"SECAM-K1"  },
-	{ V4L2_STD_SECAM_L, 	"SECAM-L"   },
-	{ V4L2_STD_SECAM_LC, 	"SECAM-Lc"  },
-	{ 0, 			"Unknown"   }
-};
-
-/* video4linux standard ID conversion to standard name
- */
-const char *v4l2_norm_to_name(v4l2_std_id id)
-{
-	u32 myid = id;
-	int i;
-
-	/* HACK: ppc32 architecture doesn't have __ucmpdi2 function to handle
-	   64 bit comparations. So, on that architecture, with some gcc
-	   variants, compilation fails. Currently, the max value is 30bit wide.
-	 */
-	BUG_ON(myid != id);
-
-	for (i = 0; standards[i].std; i++)
-		if (myid == standards[i].std)
-			break;
-	return standards[i].descr;
-}
-EXPORT_SYMBOL(v4l2_norm_to_name);
-
-/* Fill in the fields of a v4l2_standard structure according to the
-   'id' and 'transmission' parameters.  Returns negative on error.  */
-int v4l2_video_std_construct(struct v4l2_standard *vs,
-			     int id, const char *name)
-{
-	u32 index = vs->index;
-
-	memset(vs, 0, sizeof(struct v4l2_standard));
-	vs->index = index;
-	vs->id    = id;
-	if (id & V4L2_STD_525_60) {
-		vs->frameperiod.numerator = 1001;
-		vs->frameperiod.denominator = 30000;
-		vs->framelines = 525;
-	} else {
-		vs->frameperiod.numerator = 1;
-		vs->frameperiod.denominator = 25;
-		vs->framelines = 625;
-	}
-	strlcpy(vs->name, name, sizeof(vs->name));
-	return 0;
-}
-EXPORT_SYMBOL(v4l2_video_std_construct);
-
-/* ----------------------------------------------------------------- */
-/* some arrays for pretty-printing debug messages of enum types      */
-
-const char *v4l2_field_names[] = {
-	[V4L2_FIELD_ANY]        = "any",
-	[V4L2_FIELD_NONE]       = "none",
-	[V4L2_FIELD_TOP]        = "top",
-	[V4L2_FIELD_BOTTOM]     = "bottom",
-	[V4L2_FIELD_INTERLACED] = "interlaced",
-	[V4L2_FIELD_SEQ_TB]     = "seq-tb",
-	[V4L2_FIELD_SEQ_BT]     = "seq-bt",
-	[V4L2_FIELD_ALTERNATE]  = "alternate",
-	[V4L2_FIELD_INTERLACED_TB] = "interlaced-tb",
-	[V4L2_FIELD_INTERLACED_BT] = "interlaced-bt",
-};
-EXPORT_SYMBOL(v4l2_field_names);
-
-const char *v4l2_type_names[] = {
-	[V4L2_BUF_TYPE_VIDEO_CAPTURE]      = "vid-cap",
-	[V4L2_BUF_TYPE_VIDEO_OVERLAY]      = "vid-overlay",
-	[V4L2_BUF_TYPE_VIDEO_OUTPUT]       = "vid-out",
-	[V4L2_BUF_TYPE_VBI_CAPTURE]        = "vbi-cap",
-	[V4L2_BUF_TYPE_VBI_OUTPUT]         = "vbi-out",
-	[V4L2_BUF_TYPE_SLICED_VBI_CAPTURE] = "sliced-vbi-cap",
-	[V4L2_BUF_TYPE_SLICED_VBI_OUTPUT]  = "sliced-vbi-out",
-	[V4L2_BUF_TYPE_VIDEO_OUTPUT_OVERLAY] = "vid-out-overlay",
-};
-EXPORT_SYMBOL(v4l2_type_names);
-
-static const char *v4l2_memory_names[] = {
-	[V4L2_MEMORY_MMAP]    = "mmap",
-	[V4L2_MEMORY_USERPTR] = "userptr",
-	[V4L2_MEMORY_OVERLAY] = "overlay",
-};
-
-#define prt_names(a, arr) ((((a) >= 0) && ((a) < ARRAY_SIZE(arr))) ? \
-			   arr[a] : "unknown")
-
-/* ------------------------------------------------------------------ */
-/* debug help functions                                               */
-
-#ifdef CONFIG_VIDEO_V4L1_COMPAT
-static const char *v4l1_ioctls[] = {
-	[_IOC_NR(VIDIOCGCAP)]       = "VIDIOCGCAP",
-	[_IOC_NR(VIDIOCGCHAN)]      = "VIDIOCGCHAN",
-	[_IOC_NR(VIDIOCSCHAN)]      = "VIDIOCSCHAN",
-	[_IOC_NR(VIDIOCGTUNER)]     = "VIDIOCGTUNER",
-	[_IOC_NR(VIDIOCSTUNER)]     = "VIDIOCSTUNER",
-	[_IOC_NR(VIDIOCGPICT)]      = "VIDIOCGPICT",
-	[_IOC_NR(VIDIOCSPICT)]      = "VIDIOCSPICT",
-	[_IOC_NR(VIDIOCCAPTURE)]    = "VIDIOCCAPTURE",
-	[_IOC_NR(VIDIOCGWIN)]       = "VIDIOCGWIN",
-	[_IOC_NR(VIDIOCSWIN)]       = "VIDIOCSWIN",
-	[_IOC_NR(VIDIOCGFBUF)]      = "VIDIOCGFBUF",
-	[_IOC_NR(VIDIOCSFBUF)]      = "VIDIOCSFBUF",
-	[_IOC_NR(VIDIOCKEY)]        = "VIDIOCKEY",
-	[_IOC_NR(VIDIOCGFREQ)]      = "VIDIOCGFREQ",
-	[_IOC_NR(VIDIOCSFREQ)]      = "VIDIOCSFREQ",
-	[_IOC_NR(VIDIOCGAUDIO)]     = "VIDIOCGAUDIO",
-	[_IOC_NR(VIDIOCSAUDIO)]     = "VIDIOCSAUDIO",
-	[_IOC_NR(VIDIOCSYNC)]       = "VIDIOCSYNC",
-	[_IOC_NR(VIDIOCMCAPTURE)]   = "VIDIOCMCAPTURE",
-	[_IOC_NR(VIDIOCGMBUF)]      = "VIDIOCGMBUF",
-	[_IOC_NR(VIDIOCGUNIT)]      = "VIDIOCGUNIT",
-	[_IOC_NR(VIDIOCGCAPTURE)]   = "VIDIOCGCAPTURE",
-	[_IOC_NR(VIDIOCSCAPTURE)]   = "VIDIOCSCAPTURE",
-	[_IOC_NR(VIDIOCSPLAYMODE)]  = "VIDIOCSPLAYMODE",
-	[_IOC_NR(VIDIOCSWRITEMODE)] = "VIDIOCSWRITEMODE",
-	[_IOC_NR(VIDIOCGPLAYINFO)]  = "VIDIOCGPLAYINFO",
-	[_IOC_NR(VIDIOCSMICROCODE)] = "VIDIOCSMICROCODE",
-	[_IOC_NR(VIDIOCGVBIFMT)]    = "VIDIOCGVBIFMT",
-	[_IOC_NR(VIDIOCSVBIFMT)]    = "VIDIOCSVBIFMT"
-};
-#define V4L1_IOCTLS ARRAY_SIZE(v4l1_ioctls)
-#endif
-
-static const char *v4l2_ioctls[] = {
-	[_IOC_NR(VIDIOC_QUERYCAP)]         = "VIDIOC_QUERYCAP",
-	[_IOC_NR(VIDIOC_RESERVED)]         = "VIDIOC_RESERVED",
-	[_IOC_NR(VIDIOC_ENUM_FMT)]         = "VIDIOC_ENUM_FMT",
-	[_IOC_NR(VIDIOC_G_FMT)]            = "VIDIOC_G_FMT",
-	[_IOC_NR(VIDIOC_S_FMT)]            = "VIDIOC_S_FMT",
-	[_IOC_NR(VIDIOC_REQBUFS)]          = "VIDIOC_REQBUFS",
-	[_IOC_NR(VIDIOC_QUERYBUF)]         = "VIDIOC_QUERYBUF",
-	[_IOC_NR(VIDIOC_G_FBUF)]           = "VIDIOC_G_FBUF",
-	[_IOC_NR(VIDIOC_S_FBUF)]           = "VIDIOC_S_FBUF",
-	[_IOC_NR(VIDIOC_OVERLAY)]          = "VIDIOC_OVERLAY",
-	[_IOC_NR(VIDIOC_QBUF)]             = "VIDIOC_QBUF",
-	[_IOC_NR(VIDIOC_DQBUF)]            = "VIDIOC_DQBUF",
-	[_IOC_NR(VIDIOC_STREAMON)]         = "VIDIOC_STREAMON",
-	[_IOC_NR(VIDIOC_STREAMOFF)]        = "VIDIOC_STREAMOFF",
-	[_IOC_NR(VIDIOC_G_PARM)]           = "VIDIOC_G_PARM",
-	[_IOC_NR(VIDIOC_S_PARM)]           = "VIDIOC_S_PARM",
-	[_IOC_NR(VIDIOC_G_STD)]            = "VIDIOC_G_STD",
-	[_IOC_NR(VIDIOC_S_STD)]            = "VIDIOC_S_STD",
-	[_IOC_NR(VIDIOC_ENUMSTD)]          = "VIDIOC_ENUMSTD",
-	[_IOC_NR(VIDIOC_ENUMINPUT)]        = "VIDIOC_ENUMINPUT",
-	[_IOC_NR(VIDIOC_G_CTRL)]           = "VIDIOC_G_CTRL",
-	[_IOC_NR(VIDIOC_S_CTRL)]           = "VIDIOC_S_CTRL",
-	[_IOC_NR(VIDIOC_G_TUNER)]          = "VIDIOC_G_TUNER",
-	[_IOC_NR(VIDIOC_S_TUNER)]          = "VIDIOC_S_TUNER",
-	[_IOC_NR(VIDIOC_G_AUDIO)]          = "VIDIOC_G_AUDIO",
-	[_IOC_NR(VIDIOC_S_AUDIO)]          = "VIDIOC_S_AUDIO",
-	[_IOC_NR(VIDIOC_QUERYCTRL)]        = "VIDIOC_QUERYCTRL",
-	[_IOC_NR(VIDIOC_QUERYMENU)]        = "VIDIOC_QUERYMENU",
-	[_IOC_NR(VIDIOC_G_INPUT)]          = "VIDIOC_G_INPUT",
-	[_IOC_NR(VIDIOC_S_INPUT)]          = "VIDIOC_S_INPUT",
-	[_IOC_NR(VIDIOC_G_OUTPUT)]         = "VIDIOC_G_OUTPUT",
-	[_IOC_NR(VIDIOC_S_OUTPUT)]         = "VIDIOC_S_OUTPUT",
-	[_IOC_NR(VIDIOC_ENUMOUTPUT)]       = "VIDIOC_ENUMOUTPUT",
-	[_IOC_NR(VIDIOC_G_AUDOUT)]         = "VIDIOC_G_AUDOUT",
-	[_IOC_NR(VIDIOC_S_AUDOUT)]         = "VIDIOC_S_AUDOUT",
-	[_IOC_NR(VIDIOC_G_MODULATOR)]      = "VIDIOC_G_MODULATOR",
-	[_IOC_NR(VIDIOC_S_MODULATOR)]      = "VIDIOC_S_MODULATOR",
-	[_IOC_NR(VIDIOC_G_FREQUENCY)]      = "VIDIOC_G_FREQUENCY",
-	[_IOC_NR(VIDIOC_S_FREQUENCY)]      = "VIDIOC_S_FREQUENCY",
-	[_IOC_NR(VIDIOC_CROPCAP)]          = "VIDIOC_CROPCAP",
-	[_IOC_NR(VIDIOC_G_CROP)]           = "VIDIOC_G_CROP",
-	[_IOC_NR(VIDIOC_S_CROP)]           = "VIDIOC_S_CROP",
-	[_IOC_NR(VIDIOC_G_JPEGCOMP)]       = "VIDIOC_G_JPEGCOMP",
-	[_IOC_NR(VIDIOC_S_JPEGCOMP)]       = "VIDIOC_S_JPEGCOMP",
-	[_IOC_NR(VIDIOC_QUERYSTD)]         = "VIDIOC_QUERYSTD",
-	[_IOC_NR(VIDIOC_TRY_FMT)]          = "VIDIOC_TRY_FMT",
-	[_IOC_NR(VIDIOC_ENUMAUDIO)]        = "VIDIOC_ENUMAUDIO",
-	[_IOC_NR(VIDIOC_ENUMAUDOUT)]       = "VIDIOC_ENUMAUDOUT",
-	[_IOC_NR(VIDIOC_G_PRIORITY)]       = "VIDIOC_G_PRIORITY",
-	[_IOC_NR(VIDIOC_S_PRIORITY)]       = "VIDIOC_S_PRIORITY",
-	[_IOC_NR(VIDIOC_G_SLICED_VBI_CAP)] = "VIDIOC_G_SLICED_VBI_CAP",
-	[_IOC_NR(VIDIOC_LOG_STATUS)]       = "VIDIOC_LOG_STATUS",
-	[_IOC_NR(VIDIOC_G_EXT_CTRLS)]      = "VIDIOC_G_EXT_CTRLS",
-	[_IOC_NR(VIDIOC_S_EXT_CTRLS)]      = "VIDIOC_S_EXT_CTRLS",
-	[_IOC_NR(VIDIOC_TRY_EXT_CTRLS)]    = "VIDIOC_TRY_EXT_CTRLS",
-#if 1
-	[_IOC_NR(VIDIOC_ENUM_FRAMESIZES)]  = "VIDIOC_ENUM_FRAMESIZES",
-	[_IOC_NR(VIDIOC_ENUM_FRAMEINTERVALS)] = "VIDIOC_ENUM_FRAMEINTERVALS",
-	[_IOC_NR(VIDIOC_G_ENC_INDEX)] 	   = "VIDIOC_G_ENC_INDEX",
-	[_IOC_NR(VIDIOC_ENCODER_CMD)] 	   = "VIDIOC_ENCODER_CMD",
-	[_IOC_NR(VIDIOC_TRY_ENCODER_CMD)]  = "VIDIOC_TRY_ENCODER_CMD",
-
-	[_IOC_NR(VIDIOC_DBG_S_REGISTER)]   = "VIDIOC_DBG_S_REGISTER",
-	[_IOC_NR(VIDIOC_DBG_G_REGISTER)]   = "VIDIOC_DBG_G_REGISTER",
-
-	[_IOC_NR(VIDIOC_G_CHIP_IDENT)]     = "VIDIOC_G_CHIP_IDENT",
-	[_IOC_NR(VIDIOC_S_HW_FREQ_SEEK)]   = "VIDIOC_S_HW_FREQ_SEEK",
-#endif
-};
-#define V4L2_IOCTLS ARRAY_SIZE(v4l2_ioctls)
-
-static const char *v4l2_int_ioctls[] = {
-#ifdef CONFIG_VIDEO_V4L1_COMPAT
-	[_IOC_NR(DECODER_GET_CAPABILITIES)]    = "DECODER_GET_CAPABILITIES",
-	[_IOC_NR(DECODER_GET_STATUS)]          = "DECODER_GET_STATUS",
-	[_IOC_NR(DECODER_SET_NORM)]            = "DECODER_SET_NORM",
-	[_IOC_NR(DECODER_SET_INPUT)]           = "DECODER_SET_INPUT",
-	[_IOC_NR(DECODER_SET_OUTPUT)]          = "DECODER_SET_OUTPUT",
-	[_IOC_NR(DECODER_ENABLE_OUTPUT)]       = "DECODER_ENABLE_OUTPUT",
-	[_IOC_NR(DECODER_SET_PICTURE)]         = "DECODER_SET_PICTURE",
-	[_IOC_NR(DECODER_SET_GPIO)]            = "DECODER_SET_GPIO",
-	[_IOC_NR(DECODER_INIT)]                = "DECODER_INIT",
-	[_IOC_NR(DECODER_SET_VBI_BYPASS)]      = "DECODER_SET_VBI_BYPASS",
-	[_IOC_NR(DECODER_DUMP)]                = "DECODER_DUMP",
-#endif
-	[_IOC_NR(AUDC_SET_RADIO)]              = "AUDC_SET_RADIO",
-
-	[_IOC_NR(TUNER_SET_TYPE_ADDR)]         = "TUNER_SET_TYPE_ADDR",
-	[_IOC_NR(TUNER_SET_STANDBY)]           = "TUNER_SET_STANDBY",
-	[_IOC_NR(TUNER_SET_CONFIG)]            = "TUNER_SET_CONFIG",
-
-	[_IOC_NR(VIDIOC_INT_S_TUNER_MODE)]     = "VIDIOC_INT_S_TUNER_MODE",
-	[_IOC_NR(VIDIOC_INT_RESET)]            = "VIDIOC_INT_RESET",
-	[_IOC_NR(VIDIOC_INT_AUDIO_CLOCK_FREQ)] = "VIDIOC_INT_AUDIO_CLOCK_FREQ",
-	[_IOC_NR(VIDIOC_INT_DECODE_VBI_LINE)]  = "VIDIOC_INT_DECODE_VBI_LINE",
-	[_IOC_NR(VIDIOC_INT_S_VBI_DATA)]       = "VIDIOC_INT_S_VBI_DATA",
-	[_IOC_NR(VIDIOC_INT_G_VBI_DATA)]       = "VIDIOC_INT_G_VBI_DATA",
-	[_IOC_NR(VIDIOC_INT_I2S_CLOCK_FREQ)]   = "VIDIOC_INT_I2S_CLOCK_FREQ",
-	[_IOC_NR(VIDIOC_INT_S_STANDBY)]        = "VIDIOC_INT_S_STANDBY",
-	[_IOC_NR(VIDIOC_INT_S_AUDIO_ROUTING)]  = "VIDIOC_INT_S_AUDIO_ROUTING",
-	[_IOC_NR(VIDIOC_INT_G_AUDIO_ROUTING)]  = "VIDIOC_INT_G_AUDIO_ROUTING",
-	[_IOC_NR(VIDIOC_INT_S_VIDEO_ROUTING)]  = "VIDIOC_INT_S_VIDEO_ROUTING",
-	[_IOC_NR(VIDIOC_INT_G_VIDEO_ROUTING)]  = "VIDIOC_INT_G_VIDEO_ROUTING",
-	[_IOC_NR(VIDIOC_INT_S_CRYSTAL_FREQ)]   = "VIDIOC_INT_S_CRYSTAL_FREQ",
-	[_IOC_NR(VIDIOC_INT_INIT)]   	       = "VIDIOC_INT_INIT",
-	[_IOC_NR(VIDIOC_INT_G_STD_OUTPUT)]     = "VIDIOC_INT_G_STD_OUTPUT",
-	[_IOC_NR(VIDIOC_INT_S_STD_OUTPUT)]     = "VIDIOC_INT_S_STD_OUTPUT",
-};
-#define V4L2_INT_IOCTLS ARRAY_SIZE(v4l2_int_ioctls)
-
-/* Common ioctl debug function. This function can be used by
-   external ioctl messages as well as internal V4L ioctl */
-void v4l_printk_ioctl(unsigned int cmd)
-{
-	char *dir, *type;
-
-	switch (_IOC_TYPE(cmd)) {
-	case 'd':
-		if (_IOC_NR(cmd) >= V4L2_INT_IOCTLS) {
-			type = "v4l2_int";
-			break;
-		}
-		printk("%s", v4l2_int_ioctls[_IOC_NR(cmd)]);
-		return;
-#ifdef CONFIG_VIDEO_V4L1_COMPAT
-	case 'v':
-		if (_IOC_NR(cmd) >= V4L1_IOCTLS) {
-			type = "v4l1";
-			break;
-		}
-		printk("%s", v4l1_ioctls[_IOC_NR(cmd)]);
-		return;
-#endif
-	case 'V':
-		if (_IOC_NR(cmd) >= V4L2_IOCTLS) {
-			type = "v4l2";
-			break;
-		}
-		printk("%s", v4l2_ioctls[_IOC_NR(cmd)]);
-		return;
-	default:
-		type = "unknown";
-	}
-
-	switch (_IOC_DIR(cmd)) {
-	case _IOC_NONE:              dir = "--"; break;
-	case _IOC_READ:              dir = "r-"; break;
-	case _IOC_WRITE:             dir = "-w"; break;
-	case _IOC_READ | _IOC_WRITE: dir = "rw"; break;
-	default:                     dir = "*ERR*"; break;
-	}
-	printk("%s ioctl '%c', dir=%s, #%d (0x%08x)",
-		type, _IOC_TYPE(cmd), dir, _IOC_NR(cmd), cmd);
-}
-EXPORT_SYMBOL(v4l_printk_ioctl);
-
-/*
- *	sysfs stuff
- */
-
-static ssize_t show_index(struct device *cd,
-			 struct device_attribute *attr, char *buf)
-{
-	struct video_device *vfd = container_of(cd, struct video_device,
-						class_dev);
-	return sprintf(buf, "%i\n", vfd->index);
-}
-
-static ssize_t show_name(struct device *cd,
-			 struct device_attribute *attr, char *buf)
-{
-	struct video_device *vfd = container_of(cd, struct video_device,
-						class_dev);
-	return sprintf(buf, "%.*s\n", (int)sizeof(vfd->name), vfd->name);
-}
-
-static struct device_attribute video_device_attrs[] = {
-	__ATTR(name, S_IRUGO, show_name, NULL),
-	__ATTR(index, S_IRUGO, show_index, NULL),
-	__ATTR_NULL
-};
-
-struct video_device *video_device_alloc(void)
-{
-	struct video_device *vfd;
-
-	vfd = kzalloc(sizeof(*vfd),GFP_KERNEL);
-	return vfd;
-}
-EXPORT_SYMBOL(video_device_alloc);
-
-void video_device_release(struct video_device *vfd)
-{
-	kfree(vfd);
-}
-EXPORT_SYMBOL(video_device_release);
-
-static void video_release(struct device *cd)
-{
-	struct video_device *vfd = container_of(cd, struct video_device,
-								class_dev);
-
-#if 1
-	/* needed until all drivers are fixed */
-	if (!vfd->release)
-		return;
-#endif
-	vfd->release(vfd);
-}
-
-static struct class video_class = {
-	.name    = VIDEO_NAME,
-	.dev_attrs = video_device_attrs,
-	.dev_release = video_release,
-};
-
-/*
- *	Active devices
- */
-
-static struct video_device *video_device[VIDEO_NUM_DEVICES];
-static DEFINE_MUTEX(videodev_lock);
-
-struct video_device* video_devdata(struct file *file)
-{
-	return video_device[iminor(file->f_path.dentry->d_inode)];
-}
-EXPORT_SYMBOL(video_devdata);
-
-/*
- *	Open a video device - FIXME: Obsoleted
- */
-static int video_open(struct inode *inode, struct file *file)
-{
-	unsigned int minor = iminor(inode);
-	int err = 0;
-	struct video_device *vfl;
-	const struct file_operations *old_fops;
-
-	if(minor>=VIDEO_NUM_DEVICES)
-		return -ENODEV;
-	lock_kernel();
-	mutex_lock(&videodev_lock);
-	vfl=video_device[minor];
-	if(vfl==NULL) {
-		mutex_unlock(&videodev_lock);
-		request_module("char-major-%d-%d", VIDEO_MAJOR, minor);
-		mutex_lock(&videodev_lock);
-		vfl=video_device[minor];
-		if (vfl==NULL) {
-			mutex_unlock(&videodev_lock);
-			unlock_kernel();
-			return -ENODEV;
-		}
-	}
-	old_fops = file->f_op;
-	file->f_op = fops_get(vfl->fops);
-	if(file->f_op->open)
-		err = file->f_op->open(inode,file);
-	if (err) {
-		fops_put(file->f_op);
-		file->f_op = fops_get(old_fops);
-	}
-	fops_put(old_fops);
-	mutex_unlock(&videodev_lock);
-	unlock_kernel();
-	return err;
-}
-
-/*
- * helper function -- handles userspace copying for ioctl arguments
- */
-
-#ifdef __OLD_VIDIOC_
-static unsigned int
-video_fix_command(unsigned int cmd)
-{
-	switch (cmd) {
-	case VIDIOC_OVERLAY_OLD:
-		cmd = VIDIOC_OVERLAY;
-		break;
-	case VIDIOC_S_PARM_OLD:
-		cmd = VIDIOC_S_PARM;
-		break;
-	case VIDIOC_S_CTRL_OLD:
-		cmd = VIDIOC_S_CTRL;
-		break;
-	case VIDIOC_G_AUDIO_OLD:
-		cmd = VIDIOC_G_AUDIO;
-		break;
-	case VIDIOC_G_AUDOUT_OLD:
-		cmd = VIDIOC_G_AUDOUT;
-		break;
-	case VIDIOC_CROPCAP_OLD:
-		cmd = VIDIOC_CROPCAP;
-		break;
-	}
-	return cmd;
-}
-#endif
-
-/*
- * Obsolete usercopy function - Should be removed soon
- */
-int
-video_usercopy(struct inode *inode, struct file *file,
-	       unsigned int cmd, unsigned long arg,
-	       int (*func)(struct inode *inode, struct file *file,
-			   unsigned int cmd, void *arg))
-{
-	char	sbuf[128];
-	void    *mbuf = NULL;
-	void	*parg = NULL;
-	int	err  = -EINVAL;
-	int     is_ext_ctrl;
-	size_t  ctrls_size = 0;
-	void __user *user_ptr = NULL;
-
-#ifdef __OLD_VIDIOC_
-	cmd = video_fix_command(cmd);
-#endif
-	is_ext_ctrl = (cmd == VIDIOC_S_EXT_CTRLS || cmd == VIDIOC_G_EXT_CTRLS ||
-		       cmd == VIDIOC_TRY_EXT_CTRLS);
-
-	/*  Copy arguments into temp kernel buffer  */
-	switch (_IOC_DIR(cmd)) {
-	case _IOC_NONE:
-		parg = NULL;
-		break;
-	case _IOC_READ:
-	case _IOC_WRITE:
-	case (_IOC_WRITE | _IOC_READ):
-		if (_IOC_SIZE(cmd) <= sizeof(sbuf)) {
-			parg = sbuf;
-		} else {
-			/* too big to allocate from stack */
-			mbuf = kmalloc(_IOC_SIZE(cmd),GFP_KERNEL);
-			if (NULL == mbuf)
-				return -ENOMEM;
-			parg = mbuf;
-		}
-
-		err = -EFAULT;
-		if (_IOC_DIR(cmd) & _IOC_WRITE)
-			if (copy_from_user(parg, (void __user *)arg, _IOC_SIZE(cmd)))
-				goto out;
-		break;
-	}
-	if (is_ext_ctrl) {
-		struct v4l2_ext_controls *p = parg;
-
-		/* In case of an error, tell the caller that it wasn't
-		   a specific control that caused it. */
-		p->error_idx = p->count;
-		user_ptr = (void __user *)p->controls;
-		if (p->count) {
-			ctrls_size = sizeof(struct v4l2_ext_control) * p->count;
-			/* Note: v4l2_ext_controls fits in sbuf[] so mbuf is still NULL. */
-			mbuf = kmalloc(ctrls_size, GFP_KERNEL);
-			err = -ENOMEM;
-			if (NULL == mbuf)
-				goto out_ext_ctrl;
-			err = -EFAULT;
-			if (copy_from_user(mbuf, user_ptr, ctrls_size))
-				goto out_ext_ctrl;
-			p->controls = mbuf;
-		}
-	}
-
-	/* call driver */
-	err = func(inode, file, cmd, parg);
-	if (err == -ENOIOCTLCMD)
-		err = -EINVAL;
-	if (is_ext_ctrl) {
-		struct v4l2_ext_controls *p = parg;
-
-		p->controls = (void *)user_ptr;
-		if (p->count && err == 0 && copy_to_user(user_ptr, mbuf, ctrls_size))
-			err = -EFAULT;
-		goto out_ext_ctrl;
-	}
-	if (err < 0)
-		goto out;
-
-out_ext_ctrl:
-	/*  Copy results into user buffer  */
-	switch (_IOC_DIR(cmd))
-	{
-	case _IOC_READ:
-	case (_IOC_WRITE | _IOC_READ):
-		if (copy_to_user((void __user *)arg, parg, _IOC_SIZE(cmd)))
-			err = -EFAULT;
-		break;
-	}
-
-out:
-	kfree(mbuf);
-	return err;
-}
-EXPORT_SYMBOL(video_usercopy);
-
-/*
- * open/release helper functions -- handle exclusive opens
- * Should be removed soon
- */
-int video_exclusive_open(struct inode *inode, struct file *file)
-{
-	struct  video_device *vfl = video_devdata(file);
-	int retval = 0;
-
-	mutex_lock(&vfl->lock);
-	if (vfl->users) {
-		retval = -EBUSY;
-	} else {
-		vfl->users++;
-	}
-	mutex_unlock(&vfl->lock);
-	return retval;
-}
-EXPORT_SYMBOL(video_exclusive_open);
-
-int video_exclusive_release(struct inode *inode, struct file *file)
-{
-	struct  video_device *vfl = video_devdata(file);
-
-	vfl->users--;
-	return 0;
-}
-EXPORT_SYMBOL(video_exclusive_release);
-
-static void dbgbuf(unsigned int cmd, struct video_device *vfd,
-					struct v4l2_buffer *p)
-{
-	struct v4l2_timecode *tc=&p->timecode;
-
-	dbgarg (cmd, "%02ld:%02d:%02d.%08ld index=%d, type=%s, "
-		"bytesused=%d, flags=0x%08d, "
-		"field=%0d, sequence=%d, memory=%s, offset/userptr=0x%08lx, length=%d\n",
-			(p->timestamp.tv_sec/3600),
-			(int)(p->timestamp.tv_sec/60)%60,
-			(int)(p->timestamp.tv_sec%60),
-			p->timestamp.tv_usec,
-			p->index,
-			prt_names(p->type, v4l2_type_names),
-			p->bytesused, p->flags,
-			p->field, p->sequence,
-			prt_names(p->memory, v4l2_memory_names),
-			p->m.userptr, p->length);
-	dbgarg2("timecode=%02d:%02d:%02d type=%d, "
-		"flags=0x%08d, frames=%d, userbits=0x%08x\n",
-			tc->hours,tc->minutes,tc->seconds,
-			tc->type, tc->flags, tc->frames, *(__u32 *) tc->userbits);
-}
-
-static inline void dbgrect(struct video_device *vfd, char *s,
-							struct v4l2_rect *r)
-{
-	dbgarg2("%sRect start at %dx%d, size=%dx%d\n", s, r->left, r->top,
-						r->width, r->height);
-};
-
-static inline void v4l_print_pix_fmt (struct video_device *vfd,
-						struct v4l2_pix_format *fmt)
-{
-	dbgarg2 ("width=%d, height=%d, format=%c%c%c%c, field=%s, "
-		"bytesperline=%d sizeimage=%d, colorspace=%d\n",
-		fmt->width,fmt->height,
-		(fmt->pixelformat & 0xff),
-		(fmt->pixelformat >>  8) & 0xff,
-		(fmt->pixelformat >> 16) & 0xff,
-		(fmt->pixelformat >> 24) & 0xff,
-		prt_names(fmt->field, v4l2_field_names),
-		fmt->bytesperline, fmt->sizeimage, fmt->colorspace);
-};
-
-static inline void v4l_print_ext_ctrls(unsigned int cmd,
-	struct video_device *vfd, struct v4l2_ext_controls *c, int show_vals)
-{
-	__u32 i;
-
-	if (!(vfd->debug & V4L2_DEBUG_IOCTL_ARG))
-		return;
-	dbgarg(cmd, "");
-	printk(KERN_CONT "class=0x%x", c->ctrl_class);
-	for (i = 0; i < c->count; i++) {
-		if (show_vals)
-			printk(KERN_CONT " id/val=0x%x/0x%x",
-				c->controls[i].id, c->controls[i].value);
-		else
-			printk(KERN_CONT " id=0x%x", c->controls[i].id);
-	}
-	printk(KERN_CONT "\n");
-};
-
-static inline int check_ext_ctrls(struct v4l2_ext_controls *c, int allow_priv)
-{
-	__u32 i;
-
-	/* zero the reserved fields */
-	c->reserved[0] = c->reserved[1] = 0;
-	for (i = 0; i < c->count; i++) {
-		c->controls[i].reserved2[0] = 0;
-		c->controls[i].reserved2[1] = 0;
-	}
-	/* V4L2_CID_PRIVATE_BASE cannot be used as control class
-	   when using extended controls.
-	   Only when passed in through VIDIOC_G_CTRL and VIDIOC_S_CTRL
-	   is it allowed for backwards compatibility.
-	 */
-	if (!allow_priv && c->ctrl_class == V4L2_CID_PRIVATE_BASE)
-		return 0;
-	/* Check that all controls are from the same control class. */
-	for (i = 0; i < c->count; i++) {
-		if (V4L2_CTRL_ID2CLASS(c->controls[i].id) != c->ctrl_class) {
-			c->error_idx = i;
-			return 0;
-		}
-	}
-	return 1;
-}
-
-static int check_fmt (struct video_device *vfd, enum v4l2_buf_type type)
-{
-	switch (type) {
-	case V4L2_BUF_TYPE_VIDEO_CAPTURE:
-		if (vfd->vidioc_try_fmt_vid_cap)
-			return (0);
-		break;
-	case V4L2_BUF_TYPE_VIDEO_OVERLAY:
-		if (vfd->vidioc_try_fmt_vid_overlay)
-			return (0);
-		break;
-	case V4L2_BUF_TYPE_VIDEO_OUTPUT:
-		if (vfd->vidioc_try_fmt_vid_out)
-			return (0);
-		break;
-	case V4L2_BUF_TYPE_VIDEO_OUTPUT_OVERLAY:
-		if (vfd->vidioc_try_fmt_vid_out_overlay)
-			return (0);
-		break;
-	case V4L2_BUF_TYPE_VBI_CAPTURE:
-		if (vfd->vidioc_try_fmt_vbi_cap)
-			return (0);
-		break;
-	case V4L2_BUF_TYPE_VBI_OUTPUT:
-		if (vfd->vidioc_try_fmt_vbi_out)
-			return (0);
-		break;
-	case V4L2_BUF_TYPE_SLICED_VBI_CAPTURE:
-		if (vfd->vidioc_try_fmt_sliced_vbi_cap)
-			return (0);
-		break;
-	case V4L2_BUF_TYPE_SLICED_VBI_OUTPUT:
-		if (vfd->vidioc_try_fmt_sliced_vbi_out)
-			return (0);
-		break;
-	case V4L2_BUF_TYPE_PRIVATE:
-		if (vfd->vidioc_try_fmt_type_private)
-			return (0);
-		break;
-	}
-	return (-EINVAL);
-}
-
-static int __video_do_ioctl(struct inode *inode, struct file *file,
-		unsigned int cmd, void *arg)
-{
-	struct video_device *vfd = video_devdata(file);
-	void                 *fh = file->private_data;
-	int                  ret = -EINVAL;
-
-	if ( (vfd->debug & V4L2_DEBUG_IOCTL) &&
-				!(vfd->debug & V4L2_DEBUG_IOCTL_ARG)) {
-		v4l_print_ioctl(vfd->name, cmd);
-		printk("\n");
-	}
-
-#ifdef CONFIG_VIDEO_V4L1_COMPAT
-	/***********************************************************
-	 Handles calls to the obsoleted V4L1 API
-	 Due to the nature of VIDIOCGMBUF, each driver that supports
-	 V4L1 should implement its own handler for this ioctl.
-	 ***********************************************************/
-
-	/* --- streaming capture ------------------------------------- */
-	if (cmd == VIDIOCGMBUF) {
-		struct video_mbuf *p=arg;
-
-		memset(p, 0, sizeof(*p));
-
-		if (!vfd->vidiocgmbuf)
-			return ret;
-		ret=vfd->vidiocgmbuf(file, fh, p);
-		if (!ret)
-			dbgarg (cmd, "size=%d, frames=%d, offsets=0x%08lx\n",
-						p->size, p->frames,
-						(unsigned long)p->offsets);
-		return ret;
-	}
-
-	/********************************************************
-	 All other V4L1 calls are handled by v4l1_compat module.
-	 Those calls will be translated into V4L2 calls, and
-	 __video_do_ioctl will be called again, with one or more
-	 V4L2 ioctls.
-	 ********************************************************/
-	if (_IOC_TYPE(cmd)=='v')
-		return v4l_compat_translate_ioctl(inode,file,cmd,arg,
-						__video_do_ioctl);
-#endif
-
-	switch(cmd) {
-	/* --- capabilities ------------------------------------------ */
-	case VIDIOC_QUERYCAP:
-	{
-		struct v4l2_capability *cap = (struct v4l2_capability*)arg;
-		memset(cap, 0, sizeof(*cap));
-
-		if (!vfd->vidioc_querycap)
-			break;
-
-		ret=vfd->vidioc_querycap(file, fh, cap);
-		if (!ret)
-			dbgarg (cmd, "driver=%s, card=%s, bus=%s, "
-					"version=0x%08x, "
-					"capabilities=0x%08x\n",
-					cap->driver,cap->card,cap->bus_info,
-					cap->version,
-					cap->capabilities);
-		break;
-	}
-
-	/* --- priority ------------------------------------------ */
-	case VIDIOC_G_PRIORITY:
-	{
-		enum v4l2_priority *p=arg;
-
-		if (!vfd->vidioc_g_priority)
-			break;
-		ret=vfd->vidioc_g_priority(file, fh, p);
-		if (!ret)
-			dbgarg(cmd, "priority is %d\n", *p);
-		break;
-	}
-	case VIDIOC_S_PRIORITY:
-	{
-		enum v4l2_priority *p=arg;
-
-		if (!vfd->vidioc_s_priority)
-			break;
-		dbgarg(cmd, "setting priority to %d\n", *p);
-		ret=vfd->vidioc_s_priority(file, fh, *p);
-		break;
-	}
-
-	/* --- capture ioctls ---------------------------------------- */
-	case VIDIOC_ENUM_FMT:
-	{
-		struct v4l2_fmtdesc *f = arg;
-		enum v4l2_buf_type type;
-		unsigned int index;
-
-		index = f->index;
-		type  = f->type;
-		memset(f,0,sizeof(*f));
-		f->index = index;
-		f->type  = type;
-
-		switch (type) {
-		case V4L2_BUF_TYPE_VIDEO_CAPTURE:
-			if (vfd->vidioc_enum_fmt_vid_cap)
-				ret = vfd->vidioc_enum_fmt_vid_cap(file, fh, f);
-			break;
-		case V4L2_BUF_TYPE_VIDEO_OVERLAY:
-			if (vfd->vidioc_enum_fmt_vid_overlay)
-				ret = vfd->vidioc_enum_fmt_vid_overlay(file,
-					fh, f);
-			break;
-#if 1
-		/* V4L2_BUF_TYPE_VBI_CAPTURE should not support VIDIOC_ENUM_FMT
-		 * according to the spec. The bttv and saa7134 drivers support
-		 * it though, so just warn that this is deprecated and will be
-		 * removed in the near future. */
-		case V4L2_BUF_TYPE_VBI_CAPTURE:
-			if (vfd->vidioc_enum_fmt_vbi_cap) {
-				printk(KERN_WARNING "vidioc_enum_fmt_vbi_cap will be removed in 2.6.28!\n");
-				ret = vfd->vidioc_enum_fmt_vbi_cap(file, fh, f);
-			}
-			break;
-#endif
-		case V4L2_BUF_TYPE_VIDEO_OUTPUT:
-			if (vfd->vidioc_enum_fmt_vid_out)
-				ret = vfd->vidioc_enum_fmt_vid_out(file, fh, f);
-			break;
-		case V4L2_BUF_TYPE_PRIVATE:
-			if (vfd->vidioc_enum_fmt_type_private)
-				ret = vfd->vidioc_enum_fmt_type_private(file,
-								fh, f);
-			break;
-		default:
-			break;
-		}
-		if (!ret)
-			dbgarg (cmd, "index=%d, type=%d, flags=%d, "
-					"pixelformat=%c%c%c%c, description='%s'\n",
-					f->index, f->type, f->flags,
-					(f->pixelformat & 0xff),
-					(f->pixelformat >>  8) & 0xff,
-					(f->pixelformat >> 16) & 0xff,
-					(f->pixelformat >> 24) & 0xff,
-					f->description);
-		break;
-	}
-	case VIDIOC_G_FMT:
-	{
-		struct v4l2_format *f = (struct v4l2_format *)arg;
-
-		memset(f->fmt.raw_data, 0, sizeof(f->fmt.raw_data));
-
-		/* FIXME: Should be one dump per type */
-		dbgarg(cmd, "type=%s\n", prt_names(f->type, v4l2_type_names));
-
-		switch (f->type) {
-		case V4L2_BUF_TYPE_VIDEO_CAPTURE:
-			if (vfd->vidioc_g_fmt_vid_cap)
-				ret = vfd->vidioc_g_fmt_vid_cap(file, fh, f);
-			if (!ret)
-				v4l_print_pix_fmt(vfd, &f->fmt.pix);
-			break;
-		case V4L2_BUF_TYPE_VIDEO_OVERLAY:
-			if (vfd->vidioc_g_fmt_vid_overlay)
-				ret = vfd->vidioc_g_fmt_vid_overlay(file,
-								    fh, f);
-			break;
-		case V4L2_BUF_TYPE_VIDEO_OUTPUT:
-			if (vfd->vidioc_g_fmt_vid_out)
-				ret = vfd->vidioc_g_fmt_vid_out(file, fh, f);
-			if (!ret)
-				v4l_print_pix_fmt(vfd, &f->fmt.pix);
-			break;
-		case V4L2_BUF_TYPE_VIDEO_OUTPUT_OVERLAY:
-			if (vfd->vidioc_g_fmt_vid_out_overlay)
-				ret = vfd->vidioc_g_fmt_vid_out_overlay(file,
-				       fh, f);
-			break;
-		case V4L2_BUF_TYPE_VBI_CAPTURE:
-			if (vfd->vidioc_g_fmt_vbi_cap)
-				ret = vfd->vidioc_g_fmt_vbi_cap(file, fh, f);
-			break;
-		case V4L2_BUF_TYPE_VBI_OUTPUT:
-			if (vfd->vidioc_g_fmt_vbi_out)
-				ret = vfd->vidioc_g_fmt_vbi_out(file, fh, f);
-			break;
-		case V4L2_BUF_TYPE_SLICED_VBI_CAPTURE:
-			if (vfd->vidioc_g_fmt_sliced_vbi_cap)
-				ret = vfd->vidioc_g_fmt_sliced_vbi_cap(file,
-									fh, f);
-			break;
-		case V4L2_BUF_TYPE_SLICED_VBI_OUTPUT:
-			if (vfd->vidioc_g_fmt_sliced_vbi_out)
-				ret = vfd->vidioc_g_fmt_sliced_vbi_out(file,
-									fh, f);
-			break;
-		case V4L2_BUF_TYPE_PRIVATE:
-			if (vfd->vidioc_g_fmt_type_private)
-				ret = vfd->vidioc_g_fmt_type_private(file,
-								fh, f);
-			break;
-		}
-
-		break;
-	}
-	case VIDIOC_S_FMT:
-	{
-		struct v4l2_format *f = (struct v4l2_format *)arg;
-
-		/* FIXME: Should be one dump per type */
-		dbgarg(cmd, "type=%s\n", prt_names(f->type, v4l2_type_names));
-
-		switch (f->type) {
-		case V4L2_BUF_TYPE_VIDEO_CAPTURE:
-			v4l_print_pix_fmt(vfd, &f->fmt.pix);
-			if (vfd->vidioc_s_fmt_vid_cap)
-				ret = vfd->vidioc_s_fmt_vid_cap(file, fh, f);
-			break;
-		case V4L2_BUF_TYPE_VIDEO_OVERLAY:
-			if (vfd->vidioc_s_fmt_vid_overlay)
-				ret = vfd->vidioc_s_fmt_vid_overlay(file,
-								    fh, f);
-			break;
-		case V4L2_BUF_TYPE_VIDEO_OUTPUT:
-			v4l_print_pix_fmt(vfd, &f->fmt.pix);
-			if (vfd->vidioc_s_fmt_vid_out)
-				ret = vfd->vidioc_s_fmt_vid_out(file, fh, f);
-			break;
-		case V4L2_BUF_TYPE_VIDEO_OUTPUT_OVERLAY:
-			if (vfd->vidioc_s_fmt_vid_out_overlay)
-				ret = vfd->vidioc_s_fmt_vid_out_overlay(file,
-					fh, f);
-			break;
-		case V4L2_BUF_TYPE_VBI_CAPTURE:
-			if (vfd->vidioc_s_fmt_vbi_cap)
-				ret = vfd->vidioc_s_fmt_vbi_cap(file, fh, f);
-			break;
-		case V4L2_BUF_TYPE_VBI_OUTPUT:
-			if (vfd->vidioc_s_fmt_vbi_out)
-				ret = vfd->vidioc_s_fmt_vbi_out(file, fh, f);
-			break;
-		case V4L2_BUF_TYPE_SLICED_VBI_CAPTURE:
-			if (vfd->vidioc_s_fmt_sliced_vbi_cap)
-				ret = vfd->vidioc_s_fmt_sliced_vbi_cap(file,
-									fh, f);
-			break;
-		case V4L2_BUF_TYPE_SLICED_VBI_OUTPUT:
-			if (vfd->vidioc_s_fmt_sliced_vbi_out)
-				ret = vfd->vidioc_s_fmt_sliced_vbi_out(file,
-									fh, f);
-			break;
-		case V4L2_BUF_TYPE_PRIVATE:
-			if (vfd->vidioc_s_fmt_type_private)
-				ret = vfd->vidioc_s_fmt_type_private(file,
-								fh, f);
-			break;
-		}
-		break;
-	}
-	case VIDIOC_TRY_FMT:
-	{
-		struct v4l2_format *f = (struct v4l2_format *)arg;
-
-		/* FIXME: Should be one dump per type */
-		dbgarg (cmd, "type=%s\n", prt_names(f->type,
-						v4l2_type_names));
-		switch (f->type) {
-		case V4L2_BUF_TYPE_VIDEO_CAPTURE:
-			if (vfd->vidioc_try_fmt_vid_cap)
-				ret = vfd->vidioc_try_fmt_vid_cap(file, fh, f);
-			if (!ret)
-				v4l_print_pix_fmt(vfd, &f->fmt.pix);
-			break;
-		case V4L2_BUF_TYPE_VIDEO_OVERLAY:
-			if (vfd->vidioc_try_fmt_vid_overlay)
-				ret = vfd->vidioc_try_fmt_vid_overlay(file,
-					fh, f);
-			break;
-		case V4L2_BUF_TYPE_VIDEO_OUTPUT:
-			if (vfd->vidioc_try_fmt_vid_out)
-				ret = vfd->vidioc_try_fmt_vid_out(file, fh, f);
-			if (!ret)
-				v4l_print_pix_fmt(vfd, &f->fmt.pix);
-			break;
-		case V4L2_BUF_TYPE_VIDEO_OUTPUT_OVERLAY:
-			if (vfd->vidioc_try_fmt_vid_out_overlay)
-				ret = vfd->vidioc_try_fmt_vid_out_overlay(file,
-				       fh, f);
-			break;
-		case V4L2_BUF_TYPE_VBI_CAPTURE:
-			if (vfd->vidioc_try_fmt_vbi_cap)
-				ret = vfd->vidioc_try_fmt_vbi_cap(file, fh, f);
-			break;
-		case V4L2_BUF_TYPE_VBI_OUTPUT:
-			if (vfd->vidioc_try_fmt_vbi_out)
-				ret = vfd->vidioc_try_fmt_vbi_out(file, fh, f);
-			break;
-		case V4L2_BUF_TYPE_SLICED_VBI_CAPTURE:
-			if (vfd->vidioc_try_fmt_sliced_vbi_cap)
-				ret = vfd->vidioc_try_fmt_sliced_vbi_cap(file,
-								fh, f);
-			break;
-		case V4L2_BUF_TYPE_SLICED_VBI_OUTPUT:
-			if (vfd->vidioc_try_fmt_sliced_vbi_out)
-				ret = vfd->vidioc_try_fmt_sliced_vbi_out(file,
-								fh, f);
-			break;
-		case V4L2_BUF_TYPE_PRIVATE:
-			if (vfd->vidioc_try_fmt_type_private)
-				ret = vfd->vidioc_try_fmt_type_private(file,
-								fh, f);
-			break;
-		}
-
-		break;
-	}
-	/* FIXME: Those buf reqs could be handled here,
-	   with some changes on videobuf to allow its header to be included at
-	   videodev2.h or being merged at videodev2.
-	 */
-	case VIDIOC_REQBUFS:
-	{
-		struct v4l2_requestbuffers *p=arg;
-
-		if (!vfd->vidioc_reqbufs)
-			break;
-		ret = check_fmt (vfd, p->type);
-		if (ret)
-			break;
-
-		ret=vfd->vidioc_reqbufs(file, fh, p);
-		dbgarg (cmd, "count=%d, type=%s, memory=%s\n",
-				p->count,
-				prt_names(p->type, v4l2_type_names),
-				prt_names(p->memory, v4l2_memory_names));
-		break;
-	}
-	case VIDIOC_QUERYBUF:
-	{
-		struct v4l2_buffer *p=arg;
-
-		if (!vfd->vidioc_querybuf)
-			break;
-		ret = check_fmt (vfd, p->type);
-		if (ret)
-			break;
-
-		ret=vfd->vidioc_querybuf(file, fh, p);
-		if (!ret)
-			dbgbuf(cmd,vfd,p);
-		break;
-	}
-	case VIDIOC_QBUF:
-	{
-		struct v4l2_buffer *p=arg;
-
-		if (!vfd->vidioc_qbuf)
-			break;
-		ret = check_fmt (vfd, p->type);
-		if (ret)
-			break;
-
-		ret=vfd->vidioc_qbuf(file, fh, p);
-		if (!ret)
-			dbgbuf(cmd,vfd,p);
-		break;
-	}
-	case VIDIOC_DQBUF:
-	{
-		struct v4l2_buffer *p=arg;
-		if (!vfd->vidioc_dqbuf)
-			break;
-		ret = check_fmt (vfd, p->type);
-		if (ret)
-			break;
-
-		ret=vfd->vidioc_dqbuf(file, fh, p);
-		if (!ret)
-			dbgbuf(cmd,vfd,p);
-		break;
-	}
-	case VIDIOC_OVERLAY:
-	{
-		int *i = arg;
-
-		if (!vfd->vidioc_overlay)
-			break;
-		dbgarg (cmd, "value=%d\n",*i);
-		ret=vfd->vidioc_overlay(file, fh, *i);
-		break;
-	}
-	case VIDIOC_G_FBUF:
-	{
-		struct v4l2_framebuffer *p = arg;
-
-		if (!vfd->vidioc_g_fbuf)
-			break;
-		ret = vfd->vidioc_g_fbuf(file, fh, arg);
-		if (!ret) {
-			dbgarg(cmd, "capability=0x%x, flags=%d, base=0x%08lx\n",
-					p->capability, p->flags,
-					(unsigned long)p->base);
-			v4l_print_pix_fmt(vfd, &p->fmt);
-		}
-		break;
-	}
-	case VIDIOC_S_FBUF:
-	{
-		struct v4l2_framebuffer *p = arg;
-
-		if (!vfd->vidioc_s_fbuf)
-			break;
-		dbgarg(cmd, "capability=0x%x, flags=%d, base=0x%08lx\n",
-			p->capability, p->flags, (unsigned long)p->base);
-		v4l_print_pix_fmt(vfd, &p->fmt);
-		ret = vfd->vidioc_s_fbuf(file, fh, arg);
-		break;
-	}
-	case VIDIOC_STREAMON:
-	{
-		enum v4l2_buf_type i = *(int *)arg;
-		if (!vfd->vidioc_streamon)
-			break;
-		dbgarg(cmd, "type=%s\n", prt_names(i, v4l2_type_names));
-		ret=vfd->vidioc_streamon(file, fh,i);
-		break;
-	}
-	case VIDIOC_STREAMOFF:
-	{
-		enum v4l2_buf_type i = *(int *)arg;
-
-		if (!vfd->vidioc_streamoff)
-			break;
-		dbgarg(cmd, "type=%s\n", prt_names(i, v4l2_type_names));
-		ret=vfd->vidioc_streamoff(file, fh, i);
-		break;
-	}
-	/* ---------- tv norms ---------- */
-	case VIDIOC_ENUMSTD:
-	{
-		struct v4l2_standard *p = arg;
-		v4l2_std_id id = vfd->tvnorms, curr_id = 0;
-		unsigned int index = p->index, i, j = 0;
-		const char *descr = "";
-
-		/* Return norm array in a canonical way */
-		for (i = 0; i <= index && id; i++) {
-			/* last std value in the standards array is 0, so this
-			   while always ends there since (id & 0) == 0. */
-			while ((id & standards[j].std) != standards[j].std)
-				j++;
-			curr_id = standards[j].std;
-			descr = standards[j].descr;
-			j++;
-			if (curr_id == 0)
-				break;
-			if (curr_id != V4L2_STD_PAL &&
-			    curr_id != V4L2_STD_SECAM &&
-			    curr_id != V4L2_STD_NTSC)
-				id &= ~curr_id;
-		}
-		if (i <= index)
-			return -EINVAL;
-
-		v4l2_video_std_construct(p, curr_id, descr);
-		p->index = index;
-
-		dbgarg(cmd, "index=%d, id=0x%Lx, name=%s, fps=%d/%d, "
-				"framelines=%d\n", p->index,
-				(unsigned long long)p->id, p->name,
-				p->frameperiod.numerator,
-				p->frameperiod.denominator,
-				p->framelines);
-
-		ret = 0;
-		break;
-	}
-	case VIDIOC_G_STD:
-	{
-		v4l2_std_id *id = arg;
-
-		ret = 0;
-		/* Calls the specific handler */
-		if (vfd->vidioc_g_std)
-			ret = vfd->vidioc_g_std(file, fh, id);
-		else
-			*id = vfd->current_norm;
-
-		if (!ret)
-			dbgarg(cmd, "std=0x%08Lx\n", (long long unsigned)*id);
-		break;
-	}
-	case VIDIOC_S_STD:
-	{
-		v4l2_std_id *id = arg,norm;
-
-		dbgarg(cmd, "std=%08Lx\n", (long long unsigned)*id);
-
-		norm = (*id) & vfd->tvnorms;
-		if ( vfd->tvnorms && !norm)	/* Check if std is supported */
-			break;
-
-		/* Calls the specific handler */
-		if (vfd->vidioc_s_std)
-			ret=vfd->vidioc_s_std(file, fh, &norm);
-		else
-			ret=-EINVAL;
-
-		/* Updates standard information */
-		if (ret>=0)
-			vfd->current_norm=norm;
-
-		break;
-	}
-	case VIDIOC_QUERYSTD:
-	{
-		v4l2_std_id *p=arg;
-
-		if (!vfd->vidioc_querystd)
-			break;
-		ret=vfd->vidioc_querystd(file, fh, arg);
-		if (!ret)
-			dbgarg (cmd, "detected std=%08Lx\n",
-						(unsigned long long)*p);
-		break;
-	}
-	/* ------ input switching ---------- */
-	/* FIXME: Inputs can be handled inside videodev2 */
-	case VIDIOC_ENUMINPUT:
-	{
-		struct v4l2_input *p=arg;
-		int i=p->index;
-
-		if (!vfd->vidioc_enum_input)
-			break;
-		memset(p, 0, sizeof(*p));
-		p->index=i;
-
-		ret=vfd->vidioc_enum_input(file, fh, p);
-		if (!ret)
-			dbgarg (cmd, "index=%d, name=%s, type=%d, "
-					"audioset=%d, "
-					"tuner=%d, std=%08Lx, status=%d\n",
-					p->index,p->name,p->type,p->audioset,
-					p->tuner,
-					(unsigned long long)p->std,
-					p->status);
-		break;
-	}
-	case VIDIOC_G_INPUT:
-	{
-		unsigned int *i = arg;
-
-		if (!vfd->vidioc_g_input)
-			break;
-		ret=vfd->vidioc_g_input(file, fh, i);
-		if (!ret)
-			dbgarg (cmd, "value=%d\n",*i);
-		break;
-	}
-	case VIDIOC_S_INPUT:
-	{
-		unsigned int *i = arg;
-
-		if (!vfd->vidioc_s_input)
-			break;
-		dbgarg (cmd, "value=%d\n",*i);
-		ret=vfd->vidioc_s_input(file, fh, *i);
-		break;
-	}
-
-	/* ------ output switching ---------- */
-	case VIDIOC_ENUMOUTPUT:
-	{
-		struct v4l2_output *p = arg;
-		int i = p->index;
-
-		if (!vfd->vidioc_enum_output)
-			break;
-		memset(p, 0, sizeof(*p));
-		p->index = i;
-
-		ret = vfd->vidioc_enum_output(file, fh, p);
-		if (!ret)
-			dbgarg(cmd, "index=%d, name=%s, type=%d, "
-				"audioset=0x%x, "
-				"modulator=%d, std=0x%08Lx\n",
-				p->index, p->name, p->type, p->audioset,
-				p->modulator, (unsigned long long)p->std);
-		break;
-	}
-	case VIDIOC_G_OUTPUT:
-	{
-		unsigned int *i = arg;
-
-		if (!vfd->vidioc_g_output)
-			break;
-		ret=vfd->vidioc_g_output(file, fh, i);
-		if (!ret)
-			dbgarg (cmd, "value=%d\n",*i);
-		break;
-	}
-	case VIDIOC_S_OUTPUT:
-	{
-		unsigned int *i = arg;
-
-		if (!vfd->vidioc_s_output)
-			break;
-		dbgarg (cmd, "value=%d\n",*i);
-		ret=vfd->vidioc_s_output(file, fh, *i);
-		break;
-	}
-
-	/* --- controls ---------------------------------------------- */
-	case VIDIOC_QUERYCTRL:
-	{
-		struct v4l2_queryctrl *p = arg;
-
-		if (!vfd->vidioc_queryctrl)
-			break;
-		ret = vfd->vidioc_queryctrl(file, fh, p);
-		if (!ret)
-			dbgarg(cmd, "id=0x%x, type=%d, name=%s, min/max=%d/%d, "
-					"step=%d, default=%d, flags=0x%08x\n",
-					p->id, p->type, p->name,
-					p->minimum, p->maximum,
-					p->step, p->default_value, p->flags);
-		else
-			dbgarg(cmd, "id=0x%x\n", p->id);
-		break;
-	}
-	case VIDIOC_G_CTRL:
-	{
-		struct v4l2_control *p = arg;
-
-		if (vfd->vidioc_g_ctrl)
-			ret = vfd->vidioc_g_ctrl(file, fh, p);
-		else if (vfd->vidioc_g_ext_ctrls) {
-			struct v4l2_ext_controls ctrls;
-			struct v4l2_ext_control ctrl;
-
-			ctrls.ctrl_class = V4L2_CTRL_ID2CLASS(p->id);
-			ctrls.count = 1;
-			ctrls.controls = &ctrl;
-			ctrl.id = p->id;
-			ctrl.value = p->value;
-			if (check_ext_ctrls(&ctrls, 1)) {
-				ret = vfd->vidioc_g_ext_ctrls(file, fh, &ctrls);
-				if (ret == 0)
-					p->value = ctrl.value;
-			}
-		} else
-			break;
-		if (!ret)
-			dbgarg(cmd, "id=0x%x, value=%d\n", p->id, p->value);
-		else
-			dbgarg(cmd, "id=0x%x\n", p->id);
-		break;
-	}
-	case VIDIOC_S_CTRL:
-	{
-		struct v4l2_control *p = arg;
-		struct v4l2_ext_controls ctrls;
-		struct v4l2_ext_control ctrl;
-
-		if (!vfd->vidioc_s_ctrl && !vfd->vidioc_s_ext_ctrls)
-			break;
-
-		dbgarg(cmd, "id=0x%x, value=%d\n", p->id, p->value);
-
-		if (vfd->vidioc_s_ctrl) {
-			ret = vfd->vidioc_s_ctrl(file, fh, p);
-			break;
-		}
-		if (!vfd->vidioc_s_ext_ctrls)
-			break;
-
-		ctrls.ctrl_class = V4L2_CTRL_ID2CLASS(p->id);
-		ctrls.count = 1;
-		ctrls.controls = &ctrl;
-		ctrl.id = p->id;
-		ctrl.value = p->value;
-		if (check_ext_ctrls(&ctrls, 1))
-			ret = vfd->vidioc_s_ext_ctrls(file, fh, &ctrls);
-		break;
-	}
-	case VIDIOC_G_EXT_CTRLS:
-	{
-		struct v4l2_ext_controls *p = arg;
-
-		p->error_idx = p->count;
-		if (!vfd->vidioc_g_ext_ctrls)
-			break;
-		if (check_ext_ctrls(p, 0))
-			ret = vfd->vidioc_g_ext_ctrls(file, fh, p);
-		v4l_print_ext_ctrls(cmd, vfd, p, !ret);
-		break;
-	}
-	case VIDIOC_S_EXT_CTRLS:
-	{
-		struct v4l2_ext_controls *p = arg;
-
-		p->error_idx = p->count;
-		if (!vfd->vidioc_s_ext_ctrls)
-			break;
-		v4l_print_ext_ctrls(cmd, vfd, p, 1);
-		if (check_ext_ctrls(p, 0))
-			ret = vfd->vidioc_s_ext_ctrls(file, fh, p);
-		break;
-	}
-	case VIDIOC_TRY_EXT_CTRLS:
-	{
-		struct v4l2_ext_controls *p = arg;
-
-		p->error_idx = p->count;
-		if (!vfd->vidioc_try_ext_ctrls)
-			break;
-		v4l_print_ext_ctrls(cmd, vfd, p, 1);
-		if (check_ext_ctrls(p, 0))
-			ret = vfd->vidioc_try_ext_ctrls(file, fh, p);
-		break;
-	}
-	case VIDIOC_QUERYMENU:
-	{
-		struct v4l2_querymenu *p = arg;
-
-		if (!vfd->vidioc_querymenu)
-			break;
-		ret = vfd->vidioc_querymenu(file, fh, p);
-		if (!ret)
-			dbgarg(cmd, "id=0x%x, index=%d, name=%s\n",
-				p->id, p->index, p->name);
-		else
-			dbgarg(cmd, "id=0x%x, index=%d\n",
-				p->id, p->index);
-		break;
-	}
-	/* --- audio ---------------------------------------------- */
-	case VIDIOC_ENUMAUDIO:
-	{
-		struct v4l2_audio *p = arg;
-
-		if (!vfd->vidioc_enumaudio)
-			break;
-		ret = vfd->vidioc_enumaudio(file, fh, p);
-		if (!ret)
-			dbgarg(cmd, "index=%d, name=%s, capability=0x%x, "
-					"mode=0x%x\n", p->index, p->name,
-					p->capability, p->mode);
-		else
-			dbgarg(cmd, "index=%d\n", p->index);
-		break;
-	}
-	case VIDIOC_G_AUDIO:
-	{
-		struct v4l2_audio *p = arg;
-		__u32 index = p->index;
-
-		if (!vfd->vidioc_g_audio)
-			break;
-
-		memset(p, 0, sizeof(*p));
-		p->index = index;
-		ret = vfd->vidioc_g_audio(file, fh, p);
-		if (!ret)
-			dbgarg(cmd, "index=%d, name=%s, capability=0x%x, "
-					"mode=0x%x\n", p->index,
-					p->name, p->capability, p->mode);
-		else
-			dbgarg(cmd, "index=%d\n", p->index);
-		break;
-	}
-	case VIDIOC_S_AUDIO:
-	{
-		struct v4l2_audio *p = arg;
-
-		if (!vfd->vidioc_s_audio)
-			break;
-		dbgarg(cmd, "index=%d, name=%s, capability=0x%x, "
-					"mode=0x%x\n", p->index, p->name,
-					p->capability, p->mode);
-		ret = vfd->vidioc_s_audio(file, fh, p);
-		break;
-	}
-	case VIDIOC_ENUMAUDOUT:
-	{
-		struct v4l2_audioout *p=arg;
-
-		if (!vfd->vidioc_enumaudout)
-			break;
-		dbgarg(cmd, "Enum for index=%d\n", p->index);
-		ret=vfd->vidioc_enumaudout(file, fh, p);
-		if (!ret)
-			dbgarg2("index=%d, name=%s, capability=%d, "
-					"mode=%d\n", p->index, p->name,
-					p->capability,p->mode);
-		break;
-	}
-	case VIDIOC_G_AUDOUT:
-	{
-		struct v4l2_audioout *p=arg;
-
-		if (!vfd->vidioc_g_audout)
-			break;
-		dbgarg(cmd, "Enum for index=%d\n", p->index);
-		ret=vfd->vidioc_g_audout(file, fh, p);
-		if (!ret)
-			dbgarg2("index=%d, name=%s, capability=%d, "
-					"mode=%d\n", p->index, p->name,
-					p->capability,p->mode);
-		break;
-	}
-	case VIDIOC_S_AUDOUT:
-	{
-		struct v4l2_audioout *p=arg;
-
-		if (!vfd->vidioc_s_audout)
-			break;
-		dbgarg(cmd, "index=%d, name=%s, capability=%d, "
-					"mode=%d\n", p->index, p->name,
-					p->capability,p->mode);
-
-		ret=vfd->vidioc_s_audout(file, fh, p);
-		break;
-	}
-	case VIDIOC_G_MODULATOR:
-	{
-		struct v4l2_modulator *p=arg;
-		if (!vfd->vidioc_g_modulator)
-			break;
-		ret=vfd->vidioc_g_modulator(file, fh, p);
-		if (!ret)
-			dbgarg(cmd, "index=%d, name=%s, "
-					"capability=%d, rangelow=%d,"
-					" rangehigh=%d, txsubchans=%d\n",
-					p->index, p->name,p->capability,
-					p->rangelow, p->rangehigh,
-					p->txsubchans);
-		break;
-	}
-	case VIDIOC_S_MODULATOR:
-	{
-		struct v4l2_modulator *p=arg;
-		if (!vfd->vidioc_s_modulator)
-			break;
-		dbgarg(cmd, "index=%d, name=%s, capability=%d, "
-				"rangelow=%d, rangehigh=%d, txsubchans=%d\n",
-				p->index, p->name,p->capability,p->rangelow,
-				p->rangehigh,p->txsubchans);
-			ret=vfd->vidioc_s_modulator(file, fh, p);
-		break;
-	}
-	case VIDIOC_G_CROP:
-	{
-		struct v4l2_crop *p=arg;
-		if (!vfd->vidioc_g_crop)
-			break;
-		dbgarg(cmd, "type=%s\n", prt_names(p->type, v4l2_type_names));
-		ret=vfd->vidioc_g_crop(file, fh, p);
-		if (!ret) {
-			dbgrect(vfd, "", &p->c);
-		}
-		break;
-	}
-	case VIDIOC_S_CROP:
-	{
-		struct v4l2_crop *p=arg;
-		if (!vfd->vidioc_s_crop)
-			break;
-		dbgarg(cmd, "type=%s\n", prt_names(p->type, v4l2_type_names));
-		dbgrect(vfd, "", &p->c);
-		ret=vfd->vidioc_s_crop(file, fh, p);
-		break;
-	}
-	case VIDIOC_CROPCAP:
-	{
-		struct v4l2_cropcap *p = arg;
-
-		/*FIXME: Should also show v4l2_fract pixelaspect */
-		if (!vfd->vidioc_cropcap)
-			break;
-		dbgarg(cmd, "type=%s\n", prt_names(p->type, v4l2_type_names));
-		ret = vfd->vidioc_cropcap(file, fh, p);
-		if (!ret) {
-			dbgrect(vfd, "bounds ", &p->bounds);
-			dbgrect(vfd, "defrect ", &p->defrect);
-		}
-		break;
-	}
-	case VIDIOC_G_JPEGCOMP:
-	{
-		struct v4l2_jpegcompression *p=arg;
-		if (!vfd->vidioc_g_jpegcomp)
-			break;
-		ret=vfd->vidioc_g_jpegcomp(file, fh, p);
-		if (!ret)
-			dbgarg (cmd, "quality=%d, APPn=%d, "
-						"APP_len=%d, COM_len=%d, "
-						"jpeg_markers=%d\n",
-						p->quality,p->APPn,p->APP_len,
-						p->COM_len,p->jpeg_markers);
-		break;
-	}
-	case VIDIOC_S_JPEGCOMP:
-	{
-		struct v4l2_jpegcompression *p=arg;
-		if (!vfd->vidioc_g_jpegcomp)
-			break;
-		dbgarg (cmd, "quality=%d, APPn=%d, APP_len=%d, "
-					"COM_len=%d, jpeg_markers=%d\n",
-					p->quality,p->APPn,p->APP_len,
-					p->COM_len,p->jpeg_markers);
-			ret=vfd->vidioc_s_jpegcomp(file, fh, p);
-		break;
-	}
-	case VIDIOC_G_ENC_INDEX:
-	{
-		struct v4l2_enc_idx *p=arg;
-
-		if (!vfd->vidioc_g_enc_index)
-			break;
-		ret=vfd->vidioc_g_enc_index(file, fh, p);
-		if (!ret)
-			dbgarg (cmd, "entries=%d, entries_cap=%d\n",
-					p->entries,p->entries_cap);
-		break;
-	}
-	case VIDIOC_ENCODER_CMD:
-	{
-		struct v4l2_encoder_cmd *p = arg;
-
-		if (!vfd->vidioc_encoder_cmd)
-			break;
-		memset(&p->raw, 0, sizeof(p->raw));
-		ret = vfd->vidioc_encoder_cmd(file, fh, p);
-		if (!ret)
-			dbgarg(cmd, "cmd=%d, flags=%x\n", p->cmd, p->flags);
-		break;
-	}
-	case VIDIOC_TRY_ENCODER_CMD:
-	{
-		struct v4l2_encoder_cmd *p = arg;
-
-		if (!vfd->vidioc_try_encoder_cmd)
-			break;
-		memset(&p->raw, 0, sizeof(p->raw));
-		ret = vfd->vidioc_try_encoder_cmd(file, fh, p);
-		if (!ret)
-			dbgarg(cmd, "cmd=%d, flags=%x\n", p->cmd, p->flags);
-		break;
-	}
-	case VIDIOC_G_PARM:
-	{
-		struct v4l2_streamparm *p=arg;
-		__u32 type=p->type;
-
-		memset(p,0,sizeof(*p));
-		p->type=type;
-
-		if (vfd->vidioc_g_parm) {
-			ret=vfd->vidioc_g_parm(file, fh, p);
-		} else {
-			struct v4l2_standard s;
-
-			if (p->type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
-				return -EINVAL;
-
-			v4l2_video_std_construct(&s, vfd->current_norm,
-						 v4l2_norm_to_name(vfd->current_norm));
-
-			p->parm.capture.timeperframe = s.frameperiod;
-			ret=0;
-		}
-
-		dbgarg (cmd, "type=%d\n", p->type);
-		break;
-	}
-	case VIDIOC_S_PARM:
-	{
-		struct v4l2_streamparm *p=arg;
-		if (!vfd->vidioc_s_parm)
-			break;
-		dbgarg (cmd, "type=%d\n", p->type);
-		ret=vfd->vidioc_s_parm(file, fh, p);
-		break;
-	}
-	case VIDIOC_G_TUNER:
-	{
-		struct v4l2_tuner *p = arg;
-		__u32 index = p->index;
-
-		if (!vfd->vidioc_g_tuner)
-			break;
-
-		memset(p, 0, sizeof(*p));
-		p->index = index;
-
-		ret = vfd->vidioc_g_tuner(file, fh, p);
-		if (!ret)
-			dbgarg(cmd, "index=%d, name=%s, type=%d, "
-					"capability=0x%x, rangelow=%d, "
-					"rangehigh=%d, signal=%d, afc=%d, "
-					"rxsubchans=0x%x, audmode=%d\n",
-					p->index, p->name, p->type,
-					p->capability, p->rangelow,
-					p->rangehigh, p->signal, p->afc,
-					p->rxsubchans, p->audmode);
-		break;
-	}
-	case VIDIOC_S_TUNER:
-	{
-		struct v4l2_tuner *p = arg;
-
-		if (!vfd->vidioc_s_tuner)
-			break;
-		dbgarg(cmd, "index=%d, name=%s, type=%d, "
-				"capability=0x%x, rangelow=%d, "
-				"rangehigh=%d, signal=%d, afc=%d, "
-				"rxsubchans=0x%x, audmode=%d\n",
-				p->index, p->name, p->type,
-				p->capability, p->rangelow,
-				p->rangehigh, p->signal, p->afc,
-				p->rxsubchans, p->audmode);
-		ret = vfd->vidioc_s_tuner(file, fh, p);
-		break;
-	}
-	case VIDIOC_G_FREQUENCY:
-	{
-		struct v4l2_frequency *p = arg;
-
-		if (!vfd->vidioc_g_frequency)
-			break;
-
-		memset(p->reserved, 0, sizeof(p->reserved));
-
-		ret = vfd->vidioc_g_frequency(file, fh, p);
-		if (!ret)
-			dbgarg(cmd, "tuner=%d, type=%d, frequency=%d\n",
-					p->tuner, p->type, p->frequency);
-		break;
-	}
-	case VIDIOC_S_FREQUENCY:
-	{
-		struct v4l2_frequency *p=arg;
-		if (!vfd->vidioc_s_frequency)
-			break;
-		dbgarg (cmd, "tuner=%d, type=%d, frequency=%d\n",
-				p->tuner,p->type,p->frequency);
-		ret=vfd->vidioc_s_frequency(file, fh, p);
-		break;
-	}
-	case VIDIOC_G_SLICED_VBI_CAP:
-	{
-		struct v4l2_sliced_vbi_cap *p = arg;
-		__u32 type = p->type;
-
-		if (!vfd->vidioc_g_sliced_vbi_cap)
-			break;
-		memset(p, 0, sizeof(*p));
-		p->type = type;
-		dbgarg(cmd, "type=%s\n", prt_names(p->type, v4l2_type_names));
-		ret = vfd->vidioc_g_sliced_vbi_cap(file, fh, p);
-		if (!ret)
-			dbgarg2("service_set=%d\n", p->service_set);
-		break;
-	}
-	case VIDIOC_LOG_STATUS:
-	{
-		if (!vfd->vidioc_log_status)
-			break;
-		ret=vfd->vidioc_log_status(file, fh);
-		break;
-	}
-#ifdef CONFIG_VIDEO_ADV_DEBUG
-	case VIDIOC_DBG_G_REGISTER:
-	{
-		struct v4l2_register *p=arg;
-		if (!capable(CAP_SYS_ADMIN))
-			ret=-EPERM;
-		else if (vfd->vidioc_g_register)
-			ret=vfd->vidioc_g_register(file, fh, p);
-		break;
-	}
-	case VIDIOC_DBG_S_REGISTER:
-	{
-		struct v4l2_register *p=arg;
-		if (!capable(CAP_SYS_ADMIN))
-			ret=-EPERM;
-		else if (vfd->vidioc_s_register)
-			ret=vfd->vidioc_s_register(file, fh, p);
-		break;
-	}
-#endif
-	case VIDIOC_G_CHIP_IDENT:
-	{
-		struct v4l2_chip_ident *p=arg;
-		if (!vfd->vidioc_g_chip_ident)
-			break;
-		ret=vfd->vidioc_g_chip_ident(file, fh, p);
-		if (!ret)
-			dbgarg (cmd, "chip_ident=%u, revision=0x%x\n", p->ident, p->revision);
-		break;
-	}
-	default:
-	{
-		if (!vfd->vidioc_default)
-			break;
-		ret = vfd->vidioc_default(file, fh, cmd, arg);
-		break;
-	}
-	case VIDIOC_S_HW_FREQ_SEEK:
-	{
-		struct v4l2_hw_freq_seek *p = arg;
-		if (!vfd->vidioc_s_hw_freq_seek)
-			break;
-		dbgarg(cmd,
-			"tuner=%d, type=%d, seek_upward=%d, wrap_around=%d\n",
-			p->tuner, p->type, p->seek_upward, p->wrap_around);
-		ret = vfd->vidioc_s_hw_freq_seek(file, fh, p);
-		break;
-	}
-	} /* switch */
-
-	if (vfd->debug & V4L2_DEBUG_IOCTL_ARG) {
-		if (ret < 0) {
-			v4l_print_ioctl(vfd->name, cmd);
-			printk(KERN_CONT " error %d\n", ret);
-		}
-	}
-
-	return ret;
-}
-
-int video_ioctl2 (struct inode *inode, struct file *file,
-	       unsigned int cmd, unsigned long arg)
-{
-	char	sbuf[128];
-	void    *mbuf = NULL;
-	void	*parg = NULL;
-	int	err  = -EINVAL;
-	int     is_ext_ctrl;
-	size_t  ctrls_size = 0;
-	void __user *user_ptr = NULL;
-
-#ifdef __OLD_VIDIOC_
-	cmd = video_fix_command(cmd);
-#endif
-	is_ext_ctrl = (cmd == VIDIOC_S_EXT_CTRLS || cmd == VIDIOC_G_EXT_CTRLS ||
-		       cmd == VIDIOC_TRY_EXT_CTRLS);
-
-	/*  Copy arguments into temp kernel buffer  */
-	switch (_IOC_DIR(cmd)) {
-	case _IOC_NONE:
-		parg = NULL;
-		break;
-	case _IOC_READ:
-	case _IOC_WRITE:
-	case (_IOC_WRITE | _IOC_READ):
-		if (_IOC_SIZE(cmd) <= sizeof(sbuf)) {
-			parg = sbuf;
-		} else {
-			/* too big to allocate from stack */
-			mbuf = kmalloc(_IOC_SIZE(cmd),GFP_KERNEL);
-			if (NULL == mbuf)
-				return -ENOMEM;
-			parg = mbuf;
-		}
-
-		err = -EFAULT;
-		if (_IOC_DIR(cmd) & _IOC_WRITE)
-			if (copy_from_user(parg, (void __user *)arg, _IOC_SIZE(cmd)))
-				goto out;
-		break;
-	}
-
-	if (is_ext_ctrl) {
-		struct v4l2_ext_controls *p = parg;
-
-		/* In case of an error, tell the caller that it wasn't
-		   a specific control that caused it. */
-		p->error_idx = p->count;
-		user_ptr = (void __user *)p->controls;
-		if (p->count) {
-			ctrls_size = sizeof(struct v4l2_ext_control) * p->count;
-			/* Note: v4l2_ext_controls fits in sbuf[] so mbuf is still NULL. */
-			mbuf = kmalloc(ctrls_size, GFP_KERNEL);
-			err = -ENOMEM;
-			if (NULL == mbuf)
-				goto out_ext_ctrl;
-			err = -EFAULT;
-			if (copy_from_user(mbuf, user_ptr, ctrls_size))
-				goto out_ext_ctrl;
-			p->controls = mbuf;
-		}
-	}
-
-	/* Handles IOCTL */
-	err = __video_do_ioctl(inode, file, cmd, parg);
-	if (err == -ENOIOCTLCMD)
-		err = -EINVAL;
-	if (is_ext_ctrl) {
-		struct v4l2_ext_controls *p = parg;
-
-		p->controls = (void *)user_ptr;
-		if (p->count && err == 0 && copy_to_user(user_ptr, mbuf, ctrls_size))
-			err = -EFAULT;
-		goto out_ext_ctrl;
-	}
-	if (err < 0)
-		goto out;
-
-out_ext_ctrl:
-	/*  Copy results into user buffer  */
-	switch (_IOC_DIR(cmd))
-	{
-	case _IOC_READ:
-	case (_IOC_WRITE | _IOC_READ):
-		if (copy_to_user((void __user *)arg, parg, _IOC_SIZE(cmd)))
-			err = -EFAULT;
-		break;
-	}
-
-out:
-	kfree(mbuf);
-	return err;
-}
-EXPORT_SYMBOL(video_ioctl2);
-
-/**
- * get_index - assign stream number based on parent device
- * @vdev: video_device to assign index number to, vdev->dev should be assigned
- * @num: -1 if auto assign, requested number otherwise
- *
- *
- * returns -ENFILE if num is already in use, a free index number if
- * successful.
- */
-static int get_index(struct video_device *vdev, int num)
-{
-	u32 used = 0;
-	const int max_index = sizeof(used) * 8 - 1;
-	int i;
-
-	/* Currently a single v4l driver instance cannot create more than
-	   32 devices.
-	   Increase to u64 or an array of u32 if more are needed. */
-	if (num > max_index) {
-		printk(KERN_ERR "videodev: %s num is too large\n", __func__);
-		return -EINVAL;
-	}
-
-	for (i = 0; i < VIDEO_NUM_DEVICES; i++) {
-		if (video_device[i] != NULL &&
-		    video_device[i] != vdev &&
-		    video_device[i]->dev == vdev->dev) {
-			used |= 1 << video_device[i]->index;
-		}
-	}
-
-	if (num >= 0) {
-		if (used & (1 << num))
-			return -ENFILE;
-		return num;
-	}
-
-	i = ffz(used);
-	return i > max_index ? -ENFILE : i;
-}
-
-static const struct file_operations video_fops;
-
-int video_register_device(struct video_device *vfd, int type, int nr)
-{
-	return video_register_device_index(vfd, type, nr, -1);
-}
-EXPORT_SYMBOL(video_register_device);
-
-/**
- *	video_register_device - register video4linux devices
- *	@vfd:  video device structure we want to register
- *	@type: type of device to register
- *	@nr:   which device number (0 == /dev/video0, 1 == /dev/video1, ...
- *             -1 == first free)
- *
- *	The registration code assigns minor numbers based on the type
- *	requested. -ENFILE is returned in all the device slots for this
- *	category are full. If not then the minor field is set and the
- *	driver initialize function is called (if non %NULL).
- *
- *	Zero is returned on success.
- *
- *	Valid types are
- *
- *	%VFL_TYPE_GRABBER - A frame grabber
- *
- *	%VFL_TYPE_VTX - A teletext device
- *
- *	%VFL_TYPE_VBI - Vertical blank data (undecoded)
- *
- *	%VFL_TYPE_RADIO - A radio card
- */
-
-int video_register_device_index(struct video_device *vfd, int type, int nr,
-					int index)
-{
-	int i=0;
-	int base;
-	int end;
-	int ret;
-	char *name_base;
-
-	switch(type)
-	{
-		case VFL_TYPE_GRABBER:
-			base=MINOR_VFL_TYPE_GRABBER_MIN;
-			end=MINOR_VFL_TYPE_GRABBER_MAX+1;
-			name_base = "video";
-			break;
-		case VFL_TYPE_VTX:
-			base=MINOR_VFL_TYPE_VTX_MIN;
-			end=MINOR_VFL_TYPE_VTX_MAX+1;
-			name_base = "vtx";
-			break;
-		case VFL_TYPE_VBI:
-			base=MINOR_VFL_TYPE_VBI_MIN;
-			end=MINOR_VFL_TYPE_VBI_MAX+1;
-			name_base = "vbi";
-			break;
-		case VFL_TYPE_RADIO:
-			base=MINOR_VFL_TYPE_RADIO_MIN;
-			end=MINOR_VFL_TYPE_RADIO_MAX+1;
-			name_base = "radio";
-			break;
-		default:
-			printk(KERN_ERR "%s called with unknown type: %d\n",
-			       __func__, type);
-			return -1;
-	}
-
-	/* pick a minor number */
-	mutex_lock(&videodev_lock);
-	if (nr >= 0  &&  nr < end-base) {
-		/* use the one the driver asked for */
-		i = base+nr;
-		if (NULL != video_device[i]) {
-			mutex_unlock(&videodev_lock);
-			return -ENFILE;
-		}
-	} else {
-		/* use first free */
-		for(i=base;i<end;i++)
-			if (NULL == video_device[i])
-				break;
-		if (i == end) {
-			mutex_unlock(&videodev_lock);
-			return -ENFILE;
-		}
-	}
-	video_device[i]=vfd;
-	vfd->minor=i;
-
-	ret = get_index(vfd, index);
-	vfd->index = ret;
-
-	mutex_unlock(&videodev_lock);
-
-	if (ret < 0) {
-		printk(KERN_ERR "%s: get_index failed\n", __func__);
-		goto fail_minor;
-	}
-
-	mutex_init(&vfd->lock);
-
-	/* sysfs class */
-	memset(&vfd->class_dev, 0x00, sizeof(vfd->class_dev));
-	vfd->class_dev.class       = &video_class;
-	vfd->class_dev.devt        = MKDEV(VIDEO_MAJOR, vfd->minor);
-	if (vfd->dev)
-		vfd->class_dev.parent = vfd->dev;
-	sprintf(vfd->class_dev.bus_id, "%s%d", name_base, i - base);
-	ret = device_register(&vfd->class_dev);
-	if (ret < 0) {
-		printk(KERN_ERR "%s: device_register failed\n", __func__);
-		goto fail_minor;
-	}
-
-#if 1
-	/* needed until all drivers are fixed */
-	if (!vfd->release)
-		printk(KERN_WARNING "videodev: \"%s\" has no release callback. "
-		       "Please fix your driver for proper sysfs support, see "
-		       "http://lwn.net/Articles/36850/\n", vfd->name);
-#endif
-	return 0;
-
-fail_minor:
-	mutex_lock(&videodev_lock);
-	video_device[vfd->minor] = NULL;
-	vfd->minor = -1;
-	mutex_unlock(&videodev_lock);
-	return ret;
-}
-EXPORT_SYMBOL(video_register_device_index);
-
-/**
- *	video_unregister_device - unregister a video4linux device
- *	@vfd: the device to unregister
- *
- *	This unregisters the passed device and deassigns the minor
- *	number. Future open calls will be met with errors.
- */
-
-void video_unregister_device(struct video_device *vfd)
-{
-	mutex_lock(&videodev_lock);
-	if(video_device[vfd->minor]!=vfd)
-		panic("videodev: bad unregister");
-
-	video_device[vfd->minor]=NULL;
-	device_unregister(&vfd->class_dev);
-	mutex_unlock(&videodev_lock);
-}
-EXPORT_SYMBOL(video_unregister_device);
-
-/*
- * Video fs operations
- */
-static const struct file_operations video_fops=
-{
-	.owner		= THIS_MODULE,
-	.llseek		= no_llseek,
-	.open		= video_open,
-};
-
-/*
- *	Initialise video for linux
- */
-
-static int __init videodev_init(void)
-{
-	int ret;
-
-	printk(KERN_INFO "Linux video capture interface: v2.00\n");
-	if (register_chrdev(VIDEO_MAJOR, VIDEO_NAME, &video_fops)) {
-		printk(KERN_WARNING "video_dev: unable to get major %d\n", VIDEO_MAJOR);
-		return -EIO;
-	}
-
-	ret = class_register(&video_class);
-	if (ret < 0) {
-		unregister_chrdev(VIDEO_MAJOR, VIDEO_NAME);
-		printk(KERN_WARNING "video_dev: class_register failed\n");
-		return -EIO;
-	}
-
-	return 0;
-}
-
-static void __exit videodev_exit(void)
-{
-	class_unregister(&video_class);
-	unregister_chrdev(VIDEO_MAJOR, VIDEO_NAME);
-}
-
-module_init(videodev_init)
-module_exit(videodev_exit)
-
-MODULE_AUTHOR("Alan Cox, Mauro Carvalho Chehab <mchehab@infradead.org>");
-MODULE_DESCRIPTION("Device registrar for Video4Linux drivers v2");
-MODULE_LICENSE("GPL");
-
-
-/*
- * Local variables:
- * c-basic-offset: 8
- * End:
- */
diff --git a/drivers/media/video/vino.c b/drivers/media/video/vino.c
index 01ea99c9bc1a..1edda456fc64 100644
--- a/drivers/media/video/vino.c
+++ b/drivers/media/video/vino.c
@@ -38,8 +38,10 @@
 #include <linux/i2c.h>
 #include <linux/i2c-algo-sgi.h>
 
-#include <linux/videodev.h>
+#include <linux/videodev2.h>
+#include <media/v4l2-ioctl.h>
 #include <media/v4l2-common.h>
+#include <media/v4l2-ioctl.h>
 #include <linux/video_decoder.h>
 #include <linux/mutex.h>
 
@@ -4385,8 +4387,6 @@ static const struct file_operations vino_fops = {
 
 static struct video_device v4l_device_template = {
 	.name		= "NOT SET",
-	/*.type		= VID_TYPE_CAPTURE | VID_TYPE_SUBCAPTURE | */
-	/*	VID_TYPE_CLIPPING | VID_TYPE_SCALES, VID_TYPE_OVERLAY */
 	.fops		= &vino_fops,
 	.minor		= -1,
 };
diff --git a/drivers/media/video/vivi.c b/drivers/media/video/vivi.c
index 059b01c11dc1..3518af071a2e 100644
--- a/drivers/media/video/vivi.c
+++ b/drivers/media/video/vivi.c
@@ -35,6 +35,7 @@
 #include <linux/interrupt.h>
 #include <media/videobuf-vmalloc.h>
 #include <media/v4l2-common.h>
+#include <media/v4l2-ioctl.h>
 #include <linux/kthread.h>
 #include <linux/highmem.h>
 #include <linux/freezer.h>
@@ -1065,13 +1066,7 @@ static const struct file_operations vivi_fops = {
 	.llseek         = no_llseek,
 };
 
-static struct video_device vivi_template = {
-	.name		= "vivi",
-	.type		= VID_TYPE_CAPTURE,
-	.fops           = &vivi_fops,
-	.minor		= -1,
-	.release	= video_device_release,
-
+static const struct v4l2_ioctl_ops vivi_ioctl_ops = {
 	.vidioc_querycap      = vidioc_querycap,
 	.vidioc_enum_fmt_vid_cap  = vidioc_enum_fmt_vid_cap,
 	.vidioc_g_fmt_vid_cap     = vidioc_g_fmt_vid_cap,
@@ -1093,6 +1088,15 @@ static struct video_device vivi_template = {
 #ifdef CONFIG_VIDEO_V4L1_COMPAT
 	.vidiocgmbuf          = vidiocgmbuf,
 #endif
+};
+
+static struct video_device vivi_template = {
+	.name		= "vivi",
+	.fops           = &vivi_fops,
+	.ioctl_ops 	= &vivi_ioctl_ops,
+	.minor		= -1,
+	.release	= video_device_release,
+
 	.tvnorms              = V4L2_STD_525_60,
 	.current_norm         = V4L2_STD_NTSC_M,
 };
diff --git a/drivers/media/video/vp27smpx.c b/drivers/media/video/vp27smpx.c
index cbecb3cbbbaa..577956c5410b 100644
--- a/drivers/media/video/vp27smpx.c
+++ b/drivers/media/video/vp27smpx.c
@@ -27,7 +27,7 @@
 #include <asm/uaccess.h>
 #include <linux/i2c.h>
 #include <linux/i2c-id.h>
-#include <linux/videodev.h>
+#include <linux/videodev2.h>
 #include <media/v4l2-common.h>
 #include <media/v4l2-chip-ident.h>
 #include <media/v4l2-i2c-drv.h>
diff --git a/drivers/media/video/w9966.c b/drivers/media/video/w9966.c
index 33f702698a56..9402f40095b4 100644
--- a/drivers/media/video/w9966.c
+++ b/drivers/media/video/w9966.c
@@ -57,8 +57,9 @@
 #include <linux/module.h>
 #include <linux/init.h>
 #include <linux/delay.h>
-#include <linux/videodev.h>
+#include <linux/videodev2.h>
 #include <media/v4l2-common.h>
+#include <media/v4l2-ioctl.h>
 #include <linux/parport.h>
 
 /*#define DEBUG*/				/* Undef me for production */
@@ -195,9 +196,7 @@ static const struct file_operations w9966_fops = {
 	.llseek         = no_llseek,
 };
 static struct video_device w9966_template = {
-	.owner		= THIS_MODULE,
 	.name           = W9966_DRIVERNAME,
-	.type           = VID_TYPE_CAPTURE | VID_TYPE_SCALES,
 	.fops           = &w9966_fops,
 };
 
diff --git a/drivers/media/video/w9968cf.c b/drivers/media/video/w9968cf.c
index 840522442d07..168baabe4659 100644
--- a/drivers/media/video/w9968cf.c
+++ b/drivers/media/video/w9968cf.c
@@ -42,6 +42,7 @@
 #include <asm/page.h>
 #include <asm/uaccess.h>
 #include <linux/page-flags.h>
+#include <media/v4l2-ioctl.h>
 
 #include "w9968cf.h"
 #include "w9968cf_decoder.h"
@@ -3549,13 +3550,11 @@ w9968cf_usb_probe(struct usb_interface* intf, const struct usb_device_id* id)
 	}
 
 	strcpy(cam->v4ldev->name, symbolic(camlist, mod_id));
-	cam->v4ldev->owner = THIS_MODULE;
-	cam->v4ldev->type = VID_TYPE_CAPTURE | VID_TYPE_SCALES;
 	cam->v4ldev->fops = &w9968cf_fops;
 	cam->v4ldev->minor = video_nr[dev_nr];
 	cam->v4ldev->release = video_device_release;
 	video_set_drvdata(cam->v4ldev, cam);
-	cam->v4ldev->dev = &cam->dev;
+	cam->v4ldev->parent = &cam->dev;
 
 	err = video_register_device(cam->v4ldev, VFL_TYPE_GRABBER,
 				    video_nr[dev_nr]);
diff --git a/drivers/media/video/w9968cf.h b/drivers/media/video/w9968cf.h
index 3c95316bc030..30032e15e23c 100644
--- a/drivers/media/video/w9968cf.h
+++ b/drivers/media/video/w9968cf.h
@@ -21,7 +21,7 @@
 #ifndef _W9968CF_H_
 #define _W9968CF_H_
 
-#include <linux/videodev.h>
+#include <linux/videodev2.h>
 #include <linux/usb.h>
 #include <linux/i2c.h>
 #include <linux/device.h>
diff --git a/drivers/media/video/wm8739.c b/drivers/media/video/wm8739.c
index 7be47a255853..95c79ad80487 100644
--- a/drivers/media/video/wm8739.c
+++ b/drivers/media/video/wm8739.c
@@ -27,7 +27,7 @@
 #include <asm/uaccess.h>
 #include <linux/i2c.h>
 #include <linux/i2c-id.h>
-#include <linux/videodev.h>
+#include <linux/videodev2.h>
 #include <media/v4l2-common.h>
 #include <media/v4l2-chip-ident.h>
 #include <media/v4l2-i2c-drv.h>
diff --git a/drivers/media/video/wm8775.c b/drivers/media/video/wm8775.c
index c2ab70a04a74..48df661d4fc3 100644
--- a/drivers/media/video/wm8775.c
+++ b/drivers/media/video/wm8775.c
@@ -31,7 +31,7 @@
 #include <asm/uaccess.h>
 #include <linux/i2c.h>
 #include <linux/i2c-id.h>
-#include <linux/videodev.h>
+#include <linux/videodev2.h>
 #include <media/v4l2-common.h>
 #include <media/v4l2-chip-ident.h>
 #include <media/v4l2-i2c-drv-legacy.h>
diff --git a/drivers/media/video/zc0301/zc0301.h b/drivers/media/video/zc0301/zc0301.h
index 7bbab541a309..b1b5cceb4baa 100644
--- a/drivers/media/video/zc0301/zc0301.h
+++ b/drivers/media/video/zc0301/zc0301.h
@@ -25,6 +25,7 @@
 #include <linux/usb.h>
 #include <linux/videodev2.h>
 #include <media/v4l2-common.h>
+#include <media/v4l2-ioctl.h>
 #include <linux/device.h>
 #include <linux/list.h>
 #include <linux/spinlock.h>
diff --git a/drivers/media/video/zc0301/zc0301_core.c b/drivers/media/video/zc0301/zc0301_core.c
index e5c4e9f5193f..550ce7bd5c87 100644
--- a/drivers/media/video/zc0301/zc0301_core.c
+++ b/drivers/media/video/zc0301/zc0301_core.c
@@ -1985,8 +1985,6 @@ zc0301_usb_probe(struct usb_interface* intf, const struct usb_device_id* id)
 	}
 
 	strcpy(cam->v4ldev->name, "ZC0301[P] PC Camera");
-	cam->v4ldev->owner = THIS_MODULE;
-	cam->v4ldev->type = VID_TYPE_CAPTURE | VID_TYPE_SCALES;
 	cam->v4ldev->fops = &zc0301_fops;
 	cam->v4ldev->minor = video_nr[dev_nr];
 	cam->v4ldev->release = video_device_release;
diff --git a/drivers/media/video/zoran_card.c b/drivers/media/video/zoran_card.c
index 0929edb2d4f1..d842a7cb99d2 100644
--- a/drivers/media/video/zoran_card.c
+++ b/drivers/media/video/zoran_card.c
@@ -161,7 +161,7 @@ static struct pci_device_id zr36067_pci_tbl[] = {
 MODULE_DEVICE_TABLE(pci, zr36067_pci_tbl);
 
 int zoran_num;			/* number of Buzs in use */
-struct zoran zoran[BUZ_MAX];
+struct zoran *zoran[BUZ_MAX];
 
 /* videocodec bus functions ZR36060 */
 static u32
@@ -355,9 +355,15 @@ i2cid_to_modulename (u16 i2c_id)
 	case I2C_DRIVERID_BT856:
 		name = "bt856";
 		break;
+	case I2C_DRIVERID_BT866:
+		name = "bt866";
+		break;
 	case I2C_DRIVERID_VPX3220:
 		name = "vpx3220";
 		break;
+	case I2C_DRIVERID_KS0127:
+		name = "ks0127";
+		break;
 	}
 
 	return name;
@@ -1164,7 +1170,7 @@ static void
 zoran_release (struct zoran *zr)
 {
 	if (!zr->initialized)
-		return;
+		goto exit_free;
 	/* unregister videocodec bus */
 	if (zr->codec) {
 		struct videocodec_master *master = zr->codec->master_data;
@@ -1192,6 +1198,8 @@ zoran_release (struct zoran *zr)
 	iounmap(zr->zr36057_mem);
 	pci_disable_device(zr->pci_dev);
 	video_unregister_device(zr->video_dev);
+exit_free:
+	kfree(zr);
 }
 
 void
@@ -1269,8 +1277,14 @@ find_zr36057 (void)
 	while (zoran_num < BUZ_MAX &&
 	       (dev = pci_get_device(PCI_VENDOR_ID_ZORAN, PCI_DEVICE_ID_ZORAN_36057, dev)) != NULL) {
 		card_num = card[zoran_num];
-		zr = &zoran[zoran_num];
-		memset(zr, 0, sizeof(struct zoran));	// Just in case if previous cycle failed
+		zr = kzalloc(sizeof(struct zoran), GFP_KERNEL);
+		if (!zr) {
+			dprintk(1,
+				KERN_ERR
+				"%s: find_zr36057() - kzalloc failed\n",
+				ZORAN_NAME);
+			continue;
+		}
 		zr->pci_dev = dev;
 		//zr->zr36057_mem = NULL;
 		zr->id = zoran_num;
@@ -1278,7 +1292,7 @@ find_zr36057 (void)
 		spin_lock_init(&zr->spinlock);
 		mutex_init(&zr->resource_lock);
 		if (pci_enable_device(dev))
-			continue;
+			goto zr_free_mem;
 		zr->zr36057_adr = pci_resource_start(zr->pci_dev, 0);
 		pci_read_config_byte(zr->pci_dev, PCI_CLASS_REVISION,
 				     &zr->revision);
@@ -1294,7 +1308,7 @@ find_zr36057 (void)
 					KERN_ERR
 					"%s: find_zr36057() - no card specified, please use the card=X insmod option\n",
 					ZR_DEVNAME(zr));
-				continue;
+				goto zr_free_mem;
 			}
 		} else {
 			int i;
@@ -1333,7 +1347,7 @@ find_zr36057 (void)
 						KERN_ERR
 						"%s: find_zr36057() - unknown card\n",
 						ZR_DEVNAME(zr));
-					continue;
+					goto zr_free_mem;
 				}
 			}
 		}
@@ -1343,7 +1357,7 @@ find_zr36057 (void)
 				KERN_ERR
 				"%s: find_zr36057() - invalid cardnum %d\n",
 				ZR_DEVNAME(zr), card_num);
-			continue;
+			goto zr_free_mem;
 		}
 
 		/* even though we make this a non pointer and thus
@@ -1361,7 +1375,7 @@ find_zr36057 (void)
 				KERN_ERR
 				"%s: find_zr36057() - ioremap failed\n",
 				ZR_DEVNAME(zr));
-			continue;
+			goto zr_free_mem;
 		}
 
 		result = request_irq(zr->pci_dev->irq,
@@ -1530,7 +1544,7 @@ find_zr36057 (void)
 		}
 		/* Success so keep the pci_dev referenced */
 		pci_dev_get(zr->pci_dev);
-		zoran_num++;
+		zoran[zoran_num++] = zr;
 		continue;
 
 		// Init errors
@@ -1549,6 +1563,8 @@ find_zr36057 (void)
 		free_irq(zr->pci_dev->irq, zr);
 	      zr_unmap:
 		iounmap(zr->zr36057_mem);
+	      zr_free_mem:
+		kfree(zr);
 		continue;
 	}
 	if (dev)	/* Clean up ref count on early exit */
@@ -1620,7 +1636,7 @@ init_dc10_cards (void)
 
 	/* take care of Natoma chipset and a revision 1 zr36057 */
 	for (i = 0; i < zoran_num; i++) {
-		struct zoran *zr = &zoran[i];
+		struct zoran *zr = zoran[i];
 
 		if ((pci_pci_problems & PCIPCI_NATOMA) && zr->revision <= 1) {
 			zr->jpg_buffers.need_contiguous = 1;
@@ -1632,7 +1648,7 @@ init_dc10_cards (void)
 
 		if (zr36057_init(zr) < 0) {
 			for (i = 0; i < zoran_num; i++)
-				zoran_release(&zoran[i]);
+				zoran_release(zoran[i]);
 			return -EIO;
 		}
 		zoran_proc_init(zr);
@@ -1647,7 +1663,7 @@ unload_dc10_cards (void)
 	int i;
 
 	for (i = 0; i < zoran_num; i++)
-		zoran_release(&zoran[i]);
+		zoran_release(zoran[i]);
 }
 
 module_init(init_dc10_cards);
diff --git a/drivers/media/video/zoran_card.h b/drivers/media/video/zoran_card.h
index 1b5c4171cf9c..e4dc9d29b404 100644
--- a/drivers/media/video/zoran_card.h
+++ b/drivers/media/video/zoran_card.h
@@ -41,7 +41,7 @@ extern int zr36067_debug;
 /* Anybody who uses more than four? */
 #define BUZ_MAX 4
 extern int zoran_num;
-extern struct zoran zoran[BUZ_MAX];
+extern struct zoran *zoran[BUZ_MAX];
 
 extern struct video_device zoran_template;
 
diff --git a/drivers/media/video/zoran_driver.c b/drivers/media/video/zoran_driver.c
index c0675921fe20..ec6f59674b10 100644
--- a/drivers/media/video/zoran_driver.c
+++ b/drivers/media/video/zoran_driver.c
@@ -71,6 +71,7 @@
 
 #include <linux/videodev.h>
 #include <media/v4l2-common.h>
+#include <media/v4l2-ioctl.h>
 #include "videocodec.h"
 
 #include <asm/byteorder.h>
@@ -1212,8 +1213,8 @@ zoran_open (struct inode *inode,
 
 	/* find the device */
 	for (i = 0; i < zoran_num; i++) {
-		if (zoran[i].video_dev->minor == minor) {
-			zr = &zoran[i];
+		if (zoran[i]->video_dev->minor == minor) {
+			zr = zoran[i];
 			break;
 		}
 	}
@@ -4643,8 +4644,6 @@ static const struct file_operations zoran_fops = {
 
 struct video_device zoran_template __devinitdata = {
 	.name = ZORAN_NAME,
-	.type = ZORAN_VID_TYPE,
-	.type2 = ZORAN_V4L2_VID_FLAGS,
 	.fops = &zoran_fops,
 	.release = &zoran_vdev_release,
 	.minor = -1
diff --git a/drivers/media/video/zr364xx.c b/drivers/media/video/zr364xx.c
index 485df2e36132..18d1c4ba79fb 100644
--- a/drivers/media/video/zr364xx.c
+++ b/drivers/media/video/zr364xx.c
@@ -35,6 +35,7 @@
 #include <linux/proc_fs.h>
 #include <linux/highmem.h>
 #include <media/v4l2-common.h>
+#include <media/v4l2-ioctl.h>
 
 
 /* Version Information */
@@ -761,14 +762,7 @@ static const struct file_operations zr364xx_fops = {
 	.llseek = no_llseek,
 };
 
-static struct video_device zr364xx_template = {
-	.owner = THIS_MODULE,
-	.name = DRIVER_DESC,
-	.type = VID_TYPE_CAPTURE,
-	.fops = &zr364xx_fops,
-	.release = video_device_release,
-	.minor = -1,
-
+static const struct v4l2_ioctl_ops zr364xx_ioctl_ops = {
 	.vidioc_querycap	= zr364xx_vidioc_querycap,
 	.vidioc_enum_fmt_vid_cap = zr364xx_vidioc_enum_fmt_vid_cap,
 	.vidioc_try_fmt_vid_cap	= zr364xx_vidioc_try_fmt_vid_cap,
@@ -784,6 +778,14 @@ static struct video_device zr364xx_template = {
 	.vidioc_s_ctrl		= zr364xx_vidioc_s_ctrl,
 };
 
+static struct video_device zr364xx_template = {
+	.name = DRIVER_DESC,
+	.fops = &zr364xx_fops,
+	.ioctl_ops = &zr364xx_ioctl_ops,
+	.release = video_device_release,
+	.minor = -1,
+};
+
 
 
 /*******************/
diff --git a/drivers/memstick/core/memstick.c b/drivers/memstick/core/memstick.c
index 61b98c333cb0..a38005008a20 100644
--- a/drivers/memstick/core/memstick.c
+++ b/drivers/memstick/core/memstick.c
@@ -249,8 +249,11 @@ EXPORT_SYMBOL(memstick_next_req);
  */
 void memstick_new_req(struct memstick_host *host)
 {
-	host->retries = cmd_retries;
-	host->request(host);
+	if (host->card) {
+		host->retries = cmd_retries;
+		INIT_COMPLETION(host->card->mrq_complete);
+		host->request(host);
+	}
 }
 EXPORT_SYMBOL(memstick_new_req);
 
@@ -415,10 +418,14 @@ err_out:
 	return NULL;
 }
 
-static void memstick_power_on(struct memstick_host *host)
+static int memstick_power_on(struct memstick_host *host)
 {
-	host->set_param(host, MEMSTICK_POWER, MEMSTICK_POWER_ON);
-	host->set_param(host, MEMSTICK_INTERFACE, MEMSTICK_SERIAL);
+	int rc = host->set_param(host, MEMSTICK_POWER, MEMSTICK_POWER_ON);
+
+	if (!rc)
+		rc = host->set_param(host, MEMSTICK_INTERFACE, MEMSTICK_SERIAL);
+
+	return rc;
 }
 
 static void memstick_check(struct work_struct *work)
@@ -429,8 +436,11 @@ static void memstick_check(struct work_struct *work)
 
 	dev_dbg(&host->dev, "memstick_check started\n");
 	mutex_lock(&host->lock);
-	if (!host->card)
-		memstick_power_on(host);
+	if (!host->card) {
+		if (memstick_power_on(host))
+			goto out_power_off;
+	} else
+		host->card->stop(host->card);
 
 	card = memstick_alloc_card(host);
 
@@ -448,7 +458,8 @@ static void memstick_check(struct work_struct *work)
 			    || !(host->card->check(host->card))) {
 				device_unregister(&host->card->dev);
 				host->card = NULL;
-			}
+			} else
+				host->card->start(host->card);
 		}
 
 		if (!host->card) {
@@ -461,6 +472,7 @@ static void memstick_check(struct work_struct *work)
 			kfree(card);
 	}
 
+out_power_off:
 	if (!host->card)
 		host->set_param(host, MEMSTICK_POWER, MEMSTICK_POWER_OFF);
 
@@ -573,11 +585,15 @@ EXPORT_SYMBOL(memstick_suspend_host);
  */
 void memstick_resume_host(struct memstick_host *host)
 {
+	int rc = 0;
+
 	mutex_lock(&host->lock);
 	if (host->card)
-		memstick_power_on(host);
+		rc = memstick_power_on(host);
 	mutex_unlock(&host->lock);
-	memstick_detect_change(host);
+
+	if (!rc)
+		memstick_detect_change(host);
 }
 EXPORT_SYMBOL(memstick_resume_host);
 
diff --git a/drivers/memstick/core/mspro_block.c b/drivers/memstick/core/mspro_block.c
index 477d0fb6e588..44b1817f2f2f 100644
--- a/drivers/memstick/core/mspro_block.c
+++ b/drivers/memstick/core/mspro_block.c
@@ -136,9 +136,8 @@ struct mspro_block_data {
 	unsigned int          caps;
 	struct gendisk        *disk;
 	struct request_queue  *queue;
+	struct request        *block_req;
 	spinlock_t            q_lock;
-	wait_queue_head_t     q_wait;
-	struct task_struct    *q_thread;
 
 	unsigned short        page_size;
 	unsigned short        cylinders;
@@ -147,9 +146,10 @@ struct mspro_block_data {
 
 	unsigned char         system;
 	unsigned char         read_only:1,
-			      active:1,
+			      eject:1,
 			      has_request:1,
-			      data_dir:1;
+			      data_dir:1,
+			      active:1;
 	unsigned char         transfer_cmd;
 
 	int                   (*mrq_handler)(struct memstick_dev *card,
@@ -160,12 +160,14 @@ struct mspro_block_data {
 	struct scatterlist    req_sg[MSPRO_BLOCK_MAX_SEGS];
 	unsigned int          seg_count;
 	unsigned int          current_seg;
-	unsigned short        current_page;
+	unsigned int          current_page;
 };
 
 static DEFINE_IDR(mspro_block_disk_idr);
 static DEFINE_MUTEX(mspro_block_disk_lock);
 
+static int mspro_block_complete_req(struct memstick_dev *card, int error);
+
 /*** Block device ***/
 
 static int mspro_block_bd_open(struct inode *inode, struct file *filp)
@@ -197,8 +199,10 @@ static int mspro_block_disk_release(struct gendisk *disk)
 
 	mutex_lock(&mspro_block_disk_lock);
 
-	if (msb->usage_count) {
-		msb->usage_count--;
+	if (msb) {
+		if (msb->usage_count)
+			msb->usage_count--;
+
 		if (!msb->usage_count) {
 			kfree(msb);
 			disk->private_data = NULL;
@@ -523,11 +527,13 @@ static int h_mspro_block_req_init(struct memstick_dev *card,
 static int h_mspro_block_default(struct memstick_dev *card,
 				 struct memstick_request **mrq)
 {
-	complete(&card->mrq_complete);
-	if (!(*mrq)->error)
-		return -EAGAIN;
-	else
-		return (*mrq)->error;
+	return mspro_block_complete_req(card, (*mrq)->error);
+}
+
+static int h_mspro_block_default_bad(struct memstick_dev *card,
+				     struct memstick_request **mrq)
+{
+	return -ENXIO;
 }
 
 static int h_mspro_block_get_ro(struct memstick_dev *card,
@@ -535,44 +541,30 @@ static int h_mspro_block_get_ro(struct memstick_dev *card,
 {
 	struct mspro_block_data *msb = memstick_get_drvdata(card);
 
-	if ((*mrq)->error) {
-		complete(&card->mrq_complete);
-		return (*mrq)->error;
+	if (!(*mrq)->error) {
+		if ((*mrq)->data[offsetof(struct ms_status_register, status0)]
+		    & MEMSTICK_STATUS0_WP)
+			msb->read_only = 1;
+		else
+			msb->read_only = 0;
 	}
 
-	if ((*mrq)->data[offsetof(struct ms_status_register, status0)]
-	    & MEMSTICK_STATUS0_WP)
-		msb->read_only = 1;
-	else
-		msb->read_only = 0;
-
-	complete(&card->mrq_complete);
-	return -EAGAIN;
+	return mspro_block_complete_req(card, (*mrq)->error);
 }
 
 static int h_mspro_block_wait_for_ced(struct memstick_dev *card,
 				      struct memstick_request **mrq)
 {
-	if ((*mrq)->error) {
-		complete(&card->mrq_complete);
-		return (*mrq)->error;
-	}
-
 	dev_dbg(&card->dev, "wait for ced: value %x\n", (*mrq)->data[0]);
 
-	if ((*mrq)->data[0] & (MEMSTICK_INT_CMDNAK | MEMSTICK_INT_ERR)) {
-		card->current_mrq.error = -EFAULT;
-		complete(&card->mrq_complete);
-		return card->current_mrq.error;
+	if (!(*mrq)->error) {
+		if ((*mrq)->data[0] & (MEMSTICK_INT_CMDNAK | MEMSTICK_INT_ERR))
+			(*mrq)->error = -EFAULT;
+		else if (!((*mrq)->data[0] & MEMSTICK_INT_CED))
+			return 0;
 	}
 
-	if (!((*mrq)->data[0] & MEMSTICK_INT_CED))
-		return 0;
-	else {
-		card->current_mrq.error = 0;
-		complete(&card->mrq_complete);
-		return -EAGAIN;
-	}
+	return mspro_block_complete_req(card, (*mrq)->error);
 }
 
 static int h_mspro_block_transfer_data(struct memstick_dev *card,
@@ -583,10 +575,8 @@ static int h_mspro_block_transfer_data(struct memstick_dev *card,
 	struct scatterlist t_sg = { 0 };
 	size_t t_offset;
 
-	if ((*mrq)->error) {
-		complete(&card->mrq_complete);
-		return (*mrq)->error;
-	}
+	if ((*mrq)->error)
+		return mspro_block_complete_req(card, (*mrq)->error);
 
 	switch ((*mrq)->tpc) {
 	case MS_TPC_WRITE_REG:
@@ -617,8 +607,8 @@ has_int_reg:
 
 			if (msb->current_seg == msb->seg_count) {
 				if (t_val & MEMSTICK_INT_CED) {
-					complete(&card->mrq_complete);
-					return -EAGAIN;
+					return mspro_block_complete_req(card,
+									0);
 				} else {
 					card->next_request
 						= h_mspro_block_wait_for_ced;
@@ -666,140 +656,184 @@ has_int_reg:
 
 /*** Data transfer ***/
 
-static void mspro_block_process_request(struct memstick_dev *card,
-					struct request *req)
+static int mspro_block_issue_req(struct memstick_dev *card, int chunk)
 {
 	struct mspro_block_data *msb = memstick_get_drvdata(card);
-	struct mspro_param_register param;
-	int rc, chunk, cnt;
-	unsigned short page_count;
 	sector_t t_sec;
-	unsigned long flags;
+	unsigned int count;
+	struct mspro_param_register param;
 
-	do {
-		page_count = 0;
+try_again:
+	while (chunk) {
+		msb->current_page = 0;
 		msb->current_seg = 0;
-		msb->seg_count = blk_rq_map_sg(req->q, req, msb->req_sg);
+		msb->seg_count = blk_rq_map_sg(msb->block_req->q,
+					       msb->block_req,
+					       msb->req_sg);
 
-		if (msb->seg_count) {
-			msb->current_page = 0;
-			for (rc = 0; rc < msb->seg_count; rc++)
-				page_count += msb->req_sg[rc].length
-					      / msb->page_size;
-
-			t_sec = req->sector;
-			sector_div(t_sec, msb->page_size >> 9);
-			param.system = msb->system;
-			param.data_count = cpu_to_be16(page_count);
-			param.data_address = cpu_to_be32((uint32_t)t_sec);
-			param.tpc_param = 0;
-
-			msb->data_dir = rq_data_dir(req);
-			msb->transfer_cmd = msb->data_dir == READ
-					    ? MSPRO_CMD_READ_DATA
-					    : MSPRO_CMD_WRITE_DATA;
-
-			dev_dbg(&card->dev, "data transfer: cmd %x, "
-				"lba %x, count %x\n", msb->transfer_cmd,
-				be32_to_cpu(param.data_address),
-				page_count);
-
-			card->next_request = h_mspro_block_req_init;
-			msb->mrq_handler = h_mspro_block_transfer_data;
-			memstick_init_req(&card->current_mrq, MS_TPC_WRITE_REG,
-					  &param, sizeof(param));
-			memstick_new_req(card->host);
-			wait_for_completion(&card->mrq_complete);
-			rc = card->current_mrq.error;
+		if (!msb->seg_count) {
+			chunk = __blk_end_request(msb->block_req, -ENOMEM,
+					blk_rq_cur_bytes(msb->block_req));
+			continue;
+		}
 
-			if (rc || (card->current_mrq.tpc == MSPRO_CMD_STOP)) {
-				for (cnt = 0; cnt < msb->current_seg; cnt++)
-					page_count += msb->req_sg[cnt].length
-						      / msb->page_size;
-
-				if (msb->current_page)
-					page_count += msb->current_page - 1;
-
-				if (page_count && (msb->data_dir == READ))
-					rc = msb->page_size * page_count;
-				else
-					rc = -EIO;
-			} else
-				rc = msb->page_size * page_count;
-		} else
-			rc = -EFAULT;
+		t_sec = msb->block_req->sector << 9;
+		sector_div(t_sec, msb->page_size);
 
-		spin_lock_irqsave(&msb->q_lock, flags);
-		if (rc >= 0)
-			chunk = __blk_end_request(req, 0, rc);
-		else
-			chunk = __blk_end_request(req, rc, 0);
+		count = msb->block_req->nr_sectors << 9;
+		count /= msb->page_size;
 
-		dev_dbg(&card->dev, "end chunk %d, %d\n", rc, chunk);
-		spin_unlock_irqrestore(&msb->q_lock, flags);
-	} while (chunk);
+		param.system = msb->system;
+		param.data_count = cpu_to_be16(count);
+		param.data_address = cpu_to_be32((uint32_t)t_sec);
+		param.tpc_param = 0;
+
+		msb->data_dir = rq_data_dir(msb->block_req);
+		msb->transfer_cmd = msb->data_dir == READ
+				    ? MSPRO_CMD_READ_DATA
+				    : MSPRO_CMD_WRITE_DATA;
+
+		dev_dbg(&card->dev, "data transfer: cmd %x, "
+			"lba %x, count %x\n", msb->transfer_cmd,
+			be32_to_cpu(param.data_address), count);
+
+		card->next_request = h_mspro_block_req_init;
+		msb->mrq_handler = h_mspro_block_transfer_data;
+		memstick_init_req(&card->current_mrq, MS_TPC_WRITE_REG,
+				  &param, sizeof(param));
+		memstick_new_req(card->host);
+		return 0;
+	}
+
+	dev_dbg(&card->dev, "elv_next\n");
+	msb->block_req = elv_next_request(msb->queue);
+	if (!msb->block_req) {
+		dev_dbg(&card->dev, "issue end\n");
+		return -EAGAIN;
+	}
+
+	dev_dbg(&card->dev, "trying again\n");
+	chunk = 1;
+	goto try_again;
 }
 
-static int mspro_block_has_request(struct mspro_block_data *msb)
+static int mspro_block_complete_req(struct memstick_dev *card, int error)
 {
-	int rc = 0;
+	struct mspro_block_data *msb = memstick_get_drvdata(card);
+	int chunk, cnt;
+	unsigned int t_len = 0;
 	unsigned long flags;
 
 	spin_lock_irqsave(&msb->q_lock, flags);
-	if (kthread_should_stop() || msb->has_request)
-		rc = 1;
+	dev_dbg(&card->dev, "complete %d, %d\n", msb->has_request ? 1 : 0,
+		error);
+
+	if (msb->has_request) {
+		/* Nothing to do - not really an error */
+		if (error == -EAGAIN)
+			error = 0;
+
+		if (error || (card->current_mrq.tpc == MSPRO_CMD_STOP)) {
+			if (msb->data_dir == READ) {
+				for (cnt = 0; cnt < msb->current_seg; cnt++)
+					t_len += msb->req_sg[cnt].length
+						 / msb->page_size;
+
+					if (msb->current_page)
+						t_len += msb->current_page - 1;
+
+					t_len *= msb->page_size;
+			}
+		} else
+			t_len = msb->block_req->nr_sectors << 9;
+
+		dev_dbg(&card->dev, "transferred %x (%d)\n", t_len, error);
+
+		if (error && !t_len)
+			t_len = blk_rq_cur_bytes(msb->block_req);
+
+		chunk = __blk_end_request(msb->block_req, error, t_len);
+
+		error = mspro_block_issue_req(card, chunk);
+
+		if (!error)
+			goto out;
+		else
+			msb->has_request = 0;
+	} else {
+		if (!error)
+			error = -EAGAIN;
+	}
+
+	card->next_request = h_mspro_block_default_bad;
+	complete_all(&card->mrq_complete);
+out:
 	spin_unlock_irqrestore(&msb->q_lock, flags);
-	return rc;
+	return error;
 }
 
-static int mspro_block_queue_thread(void *data)
+static void mspro_block_stop(struct memstick_dev *card)
 {
-	struct memstick_dev *card = data;
-	struct memstick_host *host = card->host;
 	struct mspro_block_data *msb = memstick_get_drvdata(card);
-	struct request *req;
+	int rc = 0;
 	unsigned long flags;
 
 	while (1) {
-		wait_event(msb->q_wait, mspro_block_has_request(msb));
-		dev_dbg(&card->dev, "thread iter\n");
-
 		spin_lock_irqsave(&msb->q_lock, flags);
-		req = elv_next_request(msb->queue);
-		dev_dbg(&card->dev, "next req %p\n", req);
-		if (!req) {
-			msb->has_request = 0;
-			if (kthread_should_stop()) {
-				spin_unlock_irqrestore(&msb->q_lock, flags);
-				break;
-			}
-		} else
-			msb->has_request = 1;
+		if (!msb->has_request) {
+			blk_stop_queue(msb->queue);
+			rc = 1;
+		}
 		spin_unlock_irqrestore(&msb->q_lock, flags);
 
-		if (req) {
-			mutex_lock(&host->lock);
-			mspro_block_process_request(card, req);
-			mutex_unlock(&host->lock);
-		}
+		if (rc)
+			break;
+
+		wait_for_completion(&card->mrq_complete);
 	}
-	dev_dbg(&card->dev, "thread finished\n");
-	return 0;
 }
 
-static void mspro_block_request(struct request_queue *q)
+static void mspro_block_start(struct memstick_dev *card)
+{
+	struct mspro_block_data *msb = memstick_get_drvdata(card);
+	unsigned long flags;
+
+	spin_lock_irqsave(&msb->q_lock, flags);
+	blk_start_queue(msb->queue);
+	spin_unlock_irqrestore(&msb->q_lock, flags);
+}
+
+static int mspro_block_prepare_req(struct request_queue *q, struct request *req)
+{
+	if (!blk_fs_request(req) && !blk_pc_request(req)) {
+		blk_dump_rq_flags(req, "MSPro unsupported request");
+		return BLKPREP_KILL;
+	}
+
+	req->cmd_flags |= REQ_DONTPREP;
+
+	return BLKPREP_OK;
+}
+
+static void mspro_block_submit_req(struct request_queue *q)
 {
 	struct memstick_dev *card = q->queuedata;
 	struct mspro_block_data *msb = memstick_get_drvdata(card);
 	struct request *req = NULL;
 
-	if (msb->q_thread) {
-		msb->has_request = 1;
-		wake_up_all(&msb->q_wait);
-	} else {
+	if (msb->has_request)
+		return;
+
+	if (msb->eject) {
 		while ((req = elv_next_request(q)) != NULL)
 			end_queued_request(req, -ENODEV);
+
+		return;
 	}
+
+	msb->has_request = 1;
+	if (mspro_block_issue_req(card, 0))
+		msb->has_request = 0;
 }
 
 /*** Initialization ***/
@@ -1169,16 +1203,14 @@ static int mspro_block_init_disk(struct memstick_dev *card)
 		goto out_release_id;
 	}
 
-	spin_lock_init(&msb->q_lock);
-	init_waitqueue_head(&msb->q_wait);
-
-	msb->queue = blk_init_queue(mspro_block_request, &msb->q_lock);
+	msb->queue = blk_init_queue(mspro_block_submit_req, &msb->q_lock);
 	if (!msb->queue) {
 		rc = -ENOMEM;
 		goto out_put_disk;
 	}
 
 	msb->queue->queuedata = card;
+	blk_queue_prep_rq(msb->queue, mspro_block_prepare_req);
 
 	blk_queue_bounce_limit(msb->queue, limit);
 	blk_queue_max_sectors(msb->queue, MSPRO_BLOCK_MAX_PAGES);
@@ -1204,14 +1236,8 @@ static int mspro_block_init_disk(struct memstick_dev *card)
 	capacity *= msb->page_size >> 9;
 	set_capacity(msb->disk, capacity);
 	dev_dbg(&card->dev, "capacity set %ld\n", capacity);
-	msb->q_thread = kthread_run(mspro_block_queue_thread, card,
-				    DRIVER_NAME"d");
-	if (IS_ERR(msb->q_thread))
-		goto out_put_disk;
 
-	mutex_unlock(&host->lock);
 	add_disk(msb->disk);
-	mutex_lock(&host->lock);
 	msb->active = 1;
 	return 0;
 
@@ -1259,6 +1285,7 @@ static int mspro_block_probe(struct memstick_dev *card)
 		return -ENOMEM;
 	memstick_set_drvdata(card, msb);
 	msb->card = card;
+	spin_lock_init(&msb->q_lock);
 
 	rc = mspro_block_init_card(card);
 
@@ -1272,6 +1299,8 @@ static int mspro_block_probe(struct memstick_dev *card)
 	rc = mspro_block_init_disk(card);
 	if (!rc) {
 		card->check = mspro_block_check_card;
+		card->stop = mspro_block_stop;
+		card->start = mspro_block_start;
 		return 0;
 	}
 
@@ -1286,26 +1315,17 @@ out_free:
 static void mspro_block_remove(struct memstick_dev *card)
 {
 	struct mspro_block_data *msb = memstick_get_drvdata(card);
-	struct task_struct *q_thread = NULL;
 	unsigned long flags;
 
 	del_gendisk(msb->disk);
 	dev_dbg(&card->dev, "mspro block remove\n");
 	spin_lock_irqsave(&msb->q_lock, flags);
-	q_thread = msb->q_thread;
-	msb->q_thread = NULL;
-	msb->active = 0;
+	msb->eject = 1;
+	blk_start_queue(msb->queue);
 	spin_unlock_irqrestore(&msb->q_lock, flags);
 
-	if (q_thread) {
-		mutex_unlock(&card->host->lock);
-		kthread_stop(q_thread);
-		mutex_lock(&card->host->lock);
-	}
-
-	dev_dbg(&card->dev, "queue thread stopped\n");
-
 	blk_cleanup_queue(msb->queue);
+	msb->queue = NULL;
 
 	sysfs_remove_group(&card->dev.kobj, &msb->attr_group);
 
@@ -1322,19 +1342,13 @@ static void mspro_block_remove(struct memstick_dev *card)
 static int mspro_block_suspend(struct memstick_dev *card, pm_message_t state)
 {
 	struct mspro_block_data *msb = memstick_get_drvdata(card);
-	struct task_struct *q_thread = NULL;
 	unsigned long flags;
 
 	spin_lock_irqsave(&msb->q_lock, flags);
-	q_thread = msb->q_thread;
-	msb->q_thread = NULL;
-	msb->active = 0;
 	blk_stop_queue(msb->queue);
+	msb->active = 0;
 	spin_unlock_irqrestore(&msb->q_lock, flags);
 
-	if (q_thread)
-		kthread_stop(q_thread);
-
 	return 0;
 }
 
@@ -1373,14 +1387,7 @@ static int mspro_block_resume(struct memstick_dev *card)
 			if (memcmp(s_attr->data, r_attr->data, s_attr->size))
 				break;
 
-			memstick_set_drvdata(card, msb);
-			msb->q_thread = kthread_run(mspro_block_queue_thread,
-						    card, DRIVER_NAME"d");
-			if (IS_ERR(msb->q_thread))
-				msb->q_thread = NULL;
-			else
-				msb->active = 1;
-
+			msb->active = 1;
 			break;
 		}
 	}
diff --git a/drivers/memstick/host/jmb38x_ms.c b/drivers/memstick/host/jmb38x_ms.c
index 4e3bfbcdf155..3485c63d20b0 100644
--- a/drivers/memstick/host/jmb38x_ms.c
+++ b/drivers/memstick/host/jmb38x_ms.c
@@ -50,6 +50,7 @@ struct jmb38x_ms_host {
 	struct jmb38x_ms        *chip;
 	void __iomem            *addr;
 	spinlock_t              lock;
+	struct tasklet_struct   notify;
 	int                     id;
 	char                    host_id[32];
 	int                     irq;
@@ -590,55 +591,97 @@ static void jmb38x_ms_abort(unsigned long data)
 	spin_unlock_irqrestore(&host->lock, flags);
 }
 
-static void jmb38x_ms_request(struct memstick_host *msh)
+static void jmb38x_ms_req_tasklet(unsigned long data)
 {
+	struct memstick_host *msh = (struct memstick_host *)data;
 	struct jmb38x_ms_host *host = memstick_priv(msh);
 	unsigned long flags;
 	int rc;
 
 	spin_lock_irqsave(&host->lock, flags);
-	if (host->req) {
-		spin_unlock_irqrestore(&host->lock, flags);
-		BUG();
-		return;
+	if (!host->req) {
+		do {
+			rc = memstick_next_req(msh, &host->req);
+			dev_dbg(&host->chip->pdev->dev, "tasklet req %d\n", rc);
+		} while (!rc && jmb38x_ms_issue_cmd(msh));
 	}
-
-	do {
-		rc = memstick_next_req(msh, &host->req);
-	} while (!rc && jmb38x_ms_issue_cmd(msh));
 	spin_unlock_irqrestore(&host->lock, flags);
 }
 
-static void jmb38x_ms_reset(struct jmb38x_ms_host *host)
+static void jmb38x_ms_dummy_submit(struct memstick_host *msh)
 {
-	unsigned int host_ctl = readl(host->addr + HOST_CONTROL);
+	return;
+}
+
+static void jmb38x_ms_submit_req(struct memstick_host *msh)
+{
+	struct jmb38x_ms_host *host = memstick_priv(msh);
+
+	tasklet_schedule(&host->notify);
+}
+
+static int jmb38x_ms_reset(struct jmb38x_ms_host *host)
+{
+	int cnt;
+
+	writel(HOST_CONTROL_RESET_REQ | HOST_CONTROL_CLOCK_EN
+	       | readl(host->addr + HOST_CONTROL),
+	       host->addr + HOST_CONTROL);
+	mmiowb();
+
+	for (cnt = 0; cnt < 20; ++cnt) {
+		if (!(HOST_CONTROL_RESET_REQ
+		      & readl(host->addr + HOST_CONTROL)))
+			goto reset_next;
 
-	writel(HOST_CONTROL_RESET_REQ, host->addr + HOST_CONTROL);
+		ndelay(20);
+	}
+	dev_dbg(&host->chip->pdev->dev, "reset_req timeout\n");
+	return -EIO;
+
+reset_next:
+	writel(HOST_CONTROL_RESET | HOST_CONTROL_CLOCK_EN
+	       | readl(host->addr + HOST_CONTROL),
+	       host->addr + HOST_CONTROL);
+	mmiowb();
+
+	for (cnt = 0; cnt < 20; ++cnt) {
+		if (!(HOST_CONTROL_RESET
+		      & readl(host->addr + HOST_CONTROL)))
+			goto reset_ok;
 
-	while (HOST_CONTROL_RESET_REQ
-	       & (host_ctl = readl(host->addr + HOST_CONTROL))) {
 		ndelay(20);
-		dev_dbg(&host->chip->pdev->dev, "reset %08x\n", host_ctl);
 	}
+	dev_dbg(&host->chip->pdev->dev, "reset timeout\n");
+	return -EIO;
 
-	writel(HOST_CONTROL_RESET, host->addr + HOST_CONTROL);
+reset_ok:
 	mmiowb();
 	writel(INT_STATUS_ALL, host->addr + INT_SIGNAL_ENABLE);
 	writel(INT_STATUS_ALL, host->addr + INT_STATUS_ENABLE);
+	return 0;
 }
 
-static void jmb38x_ms_set_param(struct memstick_host *msh,
-				enum memstick_param param,
-				int value)
+static int jmb38x_ms_set_param(struct memstick_host *msh,
+			       enum memstick_param param,
+			       int value)
 {
 	struct jmb38x_ms_host *host = memstick_priv(msh);
 	unsigned int host_ctl = readl(host->addr + HOST_CONTROL);
 	unsigned int clock_ctl = CLOCK_CONTROL_40MHZ, clock_delay = 0;
+	int rc = 0;
 
 	switch (param) {
 	case MEMSTICK_POWER:
 		if (value == MEMSTICK_POWER_ON) {
-			jmb38x_ms_reset(host);
+			rc = jmb38x_ms_reset(host);
+			if (rc)
+				return rc;
+
+			host_ctl = 7;
+			host_ctl |= HOST_CONTROL_POWER_EN
+				 | HOST_CONTROL_CLOCK_EN;
+			writel(host_ctl, host->addr + HOST_CONTROL);
 
 			writel(host->id ? PAD_PU_PD_ON_MS_SOCK1
 					: PAD_PU_PD_ON_MS_SOCK0,
@@ -647,11 +690,7 @@ static void jmb38x_ms_set_param(struct memstick_host *msh,
 			writel(PAD_OUTPUT_ENABLE_MS,
 			       host->addr + PAD_OUTPUT_ENABLE);
 
-			host_ctl = 7;
-			host_ctl |= HOST_CONTROL_POWER_EN
-				 | HOST_CONTROL_CLOCK_EN;
-			writel(host_ctl, host->addr + HOST_CONTROL);
-
+			msleep(10);
 			dev_dbg(&host->chip->pdev->dev, "power on\n");
 		} else if (value == MEMSTICK_POWER_OFF) {
 			host_ctl &= ~(HOST_CONTROL_POWER_EN
@@ -660,7 +699,8 @@ static void jmb38x_ms_set_param(struct memstick_host *msh,
 			writel(0, host->addr + PAD_OUTPUT_ENABLE);
 			writel(PAD_PU_PD_OFF, host->addr + PAD_PU_PD);
 			dev_dbg(&host->chip->pdev->dev, "power off\n");
-		}
+		} else
+			return -EINVAL;
 		break;
 	case MEMSTICK_INTERFACE:
 		host_ctl &= ~(3 << HOST_CONTROL_IF_SHIFT);
@@ -686,12 +726,14 @@ static void jmb38x_ms_set_param(struct memstick_host *msh,
 			host_ctl &= ~HOST_CONTROL_REI;
 			clock_ctl = CLOCK_CONTROL_60MHZ;
 			clock_delay = 0;
-		}
+		} else
+			return -EINVAL;
 		writel(host_ctl, host->addr + HOST_CONTROL);
 		writel(clock_ctl, host->addr + CLOCK_CONTROL);
 		writel(clock_delay, host->addr + CLOCK_DELAY);
 		break;
 	};
+	return 0;
 }
 
 #ifdef CONFIG_PM
@@ -785,7 +827,9 @@ static struct memstick_host *jmb38x_ms_alloc_host(struct jmb38x_ms *jm, int cnt)
 		 host->id);
 	host->irq = jm->pdev->irq;
 	host->timeout_jiffies = msecs_to_jiffies(1000);
-	msh->request = jmb38x_ms_request;
+
+	tasklet_init(&host->notify, jmb38x_ms_req_tasklet, (unsigned long)msh);
+	msh->request = jmb38x_ms_submit_req;
 	msh->set_param = jmb38x_ms_set_param;
 
 	msh->caps = MEMSTICK_CAP_PAR4 | MEMSTICK_CAP_PAR8;
@@ -897,6 +941,8 @@ static void jmb38x_ms_remove(struct pci_dev *dev)
 
 		host = memstick_priv(jm->hosts[cnt]);
 
+		jm->hosts[cnt]->request = jmb38x_ms_dummy_submit;
+		tasklet_kill(&host->notify);
 		writel(0, host->addr + INT_SIGNAL_ENABLE);
 		writel(0, host->addr + INT_STATUS_ENABLE);
 		mmiowb();
diff --git a/drivers/memstick/host/tifm_ms.c b/drivers/memstick/host/tifm_ms.c
index 8577de4ebb0e..d32d6ad8f3fc 100644
--- a/drivers/memstick/host/tifm_ms.c
+++ b/drivers/memstick/host/tifm_ms.c
@@ -71,6 +71,7 @@ struct tifm_ms {
 	struct tifm_dev         *dev;
 	struct timer_list       timer;
 	struct memstick_request *req;
+	struct tasklet_struct   notify;
 	unsigned int            mode_mask;
 	unsigned int            block_pos;
 	unsigned long           timeout_jiffies;
@@ -455,49 +456,51 @@ static void tifm_ms_card_event(struct tifm_dev *sock)
 	return;
 }
 
-static void tifm_ms_request(struct memstick_host *msh)
+static void tifm_ms_req_tasklet(unsigned long data)
 {
+	struct memstick_host *msh = (struct memstick_host *)data;
 	struct tifm_ms *host = memstick_priv(msh);
 	struct tifm_dev *sock = host->dev;
 	unsigned long flags;
 	int rc;
 
 	spin_lock_irqsave(&sock->lock, flags);
-	if (host->req) {
-		printk(KERN_ERR "%s : unfinished request detected\n",
-		       sock->dev.bus_id);
-		spin_unlock_irqrestore(&sock->lock, flags);
-		tifm_eject(host->dev);
-		return;
-	}
+	if (!host->req) {
+		if (host->eject) {
+			do {
+				rc = memstick_next_req(msh, &host->req);
+				if (!rc)
+					host->req->error = -ETIME;
+			} while (!rc);
+			spin_unlock_irqrestore(&sock->lock, flags);
+			return;
+		}
 
-	if (host->eject) {
 		do {
 			rc = memstick_next_req(msh, &host->req);
-			if (!rc)
-				host->req->error = -ETIME;
-		} while (!rc);
-		spin_unlock_irqrestore(&sock->lock, flags);
-		return;
+		} while (!rc && tifm_ms_issue_cmd(host));
 	}
-
-	do {
-		rc = memstick_next_req(msh, &host->req);
-	} while (!rc && tifm_ms_issue_cmd(host));
-
 	spin_unlock_irqrestore(&sock->lock, flags);
+}
+
+static void tifm_ms_dummy_submit(struct memstick_host *msh)
+{
 	return;
 }
 
-static void tifm_ms_set_param(struct memstick_host *msh,
-			      enum memstick_param param,
-			      int value)
+static void tifm_ms_submit_req(struct memstick_host *msh)
 {
 	struct tifm_ms *host = memstick_priv(msh);
-	struct tifm_dev *sock = host->dev;
-	unsigned long flags;
 
-	spin_lock_irqsave(&sock->lock, flags);
+	tasklet_schedule(&host->notify);
+}
+
+static int tifm_ms_set_param(struct memstick_host *msh,
+			     enum memstick_param param,
+			     int value)
+{
+	struct tifm_ms *host = memstick_priv(msh);
+	struct tifm_dev *sock = host->dev;
 
 	switch (param) {
 	case MEMSTICK_POWER:
@@ -512,7 +515,8 @@ static void tifm_ms_set_param(struct memstick_host *msh,
 			writel(TIFM_MS_SYS_FCLR | TIFM_MS_SYS_INTCLR,
 			       sock->addr + SOCK_MS_SYSTEM);
 			writel(0xffffffff, sock->addr + SOCK_MS_STATUS);
-		}
+		} else
+			return -EINVAL;
 		break;
 	case MEMSTICK_INTERFACE:
 		if (value == MEMSTICK_SERIAL) {
@@ -525,11 +529,12 @@ static void tifm_ms_set_param(struct memstick_host *msh,
 			writel(TIFM_CTRL_FAST_CLK
 			       | readl(sock->addr + SOCK_CONTROL),
 			       sock->addr + SOCK_CONTROL);
-		}
+		} else
+			return -EINVAL;
 		break;
 	};
 
-	spin_unlock_irqrestore(&sock->lock, flags);
+	return 0;
 }
 
 static void tifm_ms_abort(unsigned long data)
@@ -570,8 +575,9 @@ static int tifm_ms_probe(struct tifm_dev *sock)
 	host->timeout_jiffies = msecs_to_jiffies(1000);
 
 	setup_timer(&host->timer, tifm_ms_abort, (unsigned long)host);
+	tasklet_init(&host->notify, tifm_ms_req_tasklet, (unsigned long)msh);
 
-	msh->request = tifm_ms_request;
+	msh->request = tifm_ms_submit_req;
 	msh->set_param = tifm_ms_set_param;
 	sock->card_event = tifm_ms_card_event;
 	sock->data_event = tifm_ms_data_event;
@@ -593,6 +599,8 @@ static void tifm_ms_remove(struct tifm_dev *sock)
 	int rc = 0;
 	unsigned long flags;
 
+	msh->request = tifm_ms_dummy_submit;
+	tasklet_kill(&host->notify);
 	spin_lock_irqsave(&sock->lock, flags);
 	host->eject = 1;
 	if (host->req) {
diff --git a/drivers/message/fusion/lsi/mpi_history.txt b/drivers/message/fusion/lsi/mpi_history.txt
index 241592ab13ad..3f15fcfe4a2e 100644
--- a/drivers/message/fusion/lsi/mpi_history.txt
+++ b/drivers/message/fusion/lsi/mpi_history.txt
@@ -127,7 +127,7 @@ mpi_ioc.h
  *  08-08-01  01.02.01  Original release for v1.2 work.
  *                      New format for FWVersion and ProductId in
  *                      MSG_IOC_FACTS_REPLY and MPI_FW_HEADER.
- *  08-31-01  01.02.02  Addded event MPI_EVENT_SCSI_DEVICE_STATUS_CHANGE and
+ *  08-31-01  01.02.02  Added event MPI_EVENT_SCSI_DEVICE_STATUS_CHANGE and
  *                      related structure and defines.
  *                      Added event MPI_EVENT_ON_BUS_TIMER_EXPIRED.
  *                      Added MPI_IOCINIT_FLAGS_DISCARD_FW_IMAGE.
@@ -187,7 +187,7 @@ mpi_ioc.h
  *  10-11-06  01.05.12  Added MPI_IOCFACTS_EXCEPT_METADATA_UNSUPPORTED.
  *                      Added MaxInitiators field to PortFacts reply.
  *                      Added SAS Device Status Change ReasonCode for
- *                      asynchronous notificaiton.
+ *                      asynchronous notification.
  *                      Added MPI_EVENT_SAS_EXPANDER_STATUS_CHANGE and event
  *                      data structure.
  *                      Added new ImageType values for FWDownload and FWUpload
@@ -213,7 +213,7 @@ mpi_cnfg.h
  *                      Added _RESPONSE_ID_MASK definition to SCSI_PORT_1
  *                      page and updated the page version.
  *                      Added Information field and _INFO_PARAMS_NEGOTIATED
- *                      definitionto SCSI_DEVICE_0 page.
+ *                      definition to SCSI_DEVICE_0 page.
  *  06-22-00  01.00.03  Removed batch controls from LAN_0 page and updated the
  *                      page version.
  *                      Added BucketsRemaining to LAN_1 page, redefined the
diff --git a/drivers/message/fusion/mptbase.c b/drivers/message/fusion/mptbase.c
index 34402c47027e..d6a0074b9dc3 100644
--- a/drivers/message/fusion/mptbase.c
+++ b/drivers/message/fusion/mptbase.c
@@ -273,12 +273,12 @@ mpt_fault_reset_work(struct work_struct *work)
 	ioc_raw_state = mpt_GetIocState(ioc, 0);
 	if ((ioc_raw_state & MPI_IOC_STATE_MASK) == MPI_IOC_STATE_FAULT) {
 		printk(MYIOC_s_WARN_FMT "IOC is in FAULT state (%04xh)!!!\n",
-		    ioc->name, ioc_raw_state & MPI_DOORBELL_DATA_MASK);
+		       ioc->name, ioc_raw_state & MPI_DOORBELL_DATA_MASK);
 		printk(MYIOC_s_WARN_FMT "Issuing HardReset from %s!!\n",
-		    ioc->name, __FUNCTION__);
+		       ioc->name, __func__);
 		rc = mpt_HardResetHandler(ioc, CAN_SLEEP);
 		printk(MYIOC_s_WARN_FMT "%s: HardReset: %s\n", ioc->name,
-		    __FUNCTION__, (rc == 0) ? "success" : "failed");
+		       __func__, (rc == 0) ? "success" : "failed");
 		ioc_raw_state = mpt_GetIocState(ioc, 0);
 		if ((ioc_raw_state & MPI_IOC_STATE_MASK) == MPI_IOC_STATE_FAULT)
 			printk(MYIOC_s_WARN_FMT "IOC is in FAULT state after "
@@ -356,7 +356,7 @@ mpt_turbo_reply(MPT_ADAPTER *ioc, u32 pa)
 	if (!cb_idx || cb_idx >= MPT_MAX_PROTOCOL_DRIVERS ||
 		MptCallbacks[cb_idx] == NULL) {
 		printk(MYIOC_s_WARN_FMT "%s: Invalid cb_idx (%d)!\n",
-				__FUNCTION__, ioc->name, cb_idx);
+				__func__, ioc->name, cb_idx);
 		goto out;
 	}
 
@@ -420,7 +420,7 @@ mpt_reply(MPT_ADAPTER *ioc, u32 pa)
 	if (!cb_idx || cb_idx >= MPT_MAX_PROTOCOL_DRIVERS ||
 		MptCallbacks[cb_idx] == NULL) {
 		printk(MYIOC_s_WARN_FMT "%s: Invalid cb_idx (%d)!\n",
-				__FUNCTION__, ioc->name, cb_idx);
+				__func__, ioc->name, cb_idx);
 		freeme = 0;
 		goto out;
 	}
@@ -2434,7 +2434,7 @@ mpt_adapter_disable(MPT_ADAPTER *ioc)
 
 	if (ioc->cached_fw != NULL) {
 		ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "%s: Pushing FW onto "
-		    "adapter\n", __FUNCTION__, ioc->name));
+		    "adapter\n", __func__, ioc->name));
 		if ((ret = mpt_downloadboot(ioc, (MpiFwHeader_t *)
 		    ioc->cached_fw, CAN_SLEEP)) < 0) {
 			printk(MYIOC_s_WARN_FMT
@@ -3693,7 +3693,7 @@ mpt_diag_reset(MPT_ADAPTER *ioc, int ignore, int sleepFlag)
 
 	if (ioc->pcidev->device == MPI_MANUFACTPAGE_DEVID_SAS1078) {
 		drsprintk(ioc, printk(MYIOC_s_WARN_FMT "%s: Doorbell=%p; 1078 reset "
-			"address=%p\n",  ioc->name, __FUNCTION__,
+			"address=%p\n",  ioc->name, __func__,
 			&ioc->chip->Doorbell, &ioc->chip->Reset_1078));
 		CHIPREG_WRITE32(&ioc->chip->Reset_1078, 0x07);
 		if (sleepFlag == CAN_SLEEP)
@@ -4742,12 +4742,12 @@ mptbase_sas_persist_operation(MPT_ADAPTER *ioc, u8 persist_opcode)
 		break;
 	}
 
-	printk("%s: persist_opcode=%x\n",__FUNCTION__, persist_opcode);
+	printk("%s: persist_opcode=%x\n",__func__, persist_opcode);
 
 	/* Get a MF for this command.
 	 */
 	if ((mf = mpt_get_msg_frame(mpt_base_index, ioc)) == NULL) {
-		printk("%s: no msg frames!\n",__FUNCTION__);
+		printk("%s: no msg frames!\n",__func__);
 		return -1;
         }
 
@@ -4771,13 +4771,13 @@ mptbase_sas_persist_operation(MPT_ADAPTER *ioc, u8 persist_opcode)
 	    (SasIoUnitControlReply_t *)ioc->persist_reply_frame;
 	if (le16_to_cpu(sasIoUnitCntrReply->IOCStatus) != MPI_IOCSTATUS_SUCCESS) {
 		printk("%s: IOCStatus=0x%X IOCLogInfo=0x%X\n",
-		    __FUNCTION__,
+		    __func__,
 		    sasIoUnitCntrReply->IOCStatus,
 		    sasIoUnitCntrReply->IOCLogInfo);
 		return -1;
 	}
 
-	printk("%s: success\n",__FUNCTION__);
+	printk("%s: success\n",__func__);
 	return 0;
 }
 
@@ -5784,7 +5784,7 @@ SendEventAck(MPT_ADAPTER *ioc, EventNotificationReply_t *evnp)
 
 	if ((pAck = (EventAck_t *) mpt_get_msg_frame(mpt_base_index, ioc)) == NULL) {
 		dfailprintk(ioc, printk(MYIOC_s_WARN_FMT "%s, no msg frames!!\n",
-		    ioc->name,__FUNCTION__));
+		    ioc->name,__func__));
 		return -1;
 	}
 
diff --git a/drivers/message/fusion/mptctl.c b/drivers/message/fusion/mptctl.c
index a5920423e2b2..f5233f3d9eff 100644
--- a/drivers/message/fusion/mptctl.c
+++ b/drivers/message/fusion/mptctl.c
@@ -505,7 +505,7 @@ mptctl_event_process(MPT_ADAPTER *ioc, EventNotificationReply_t *pEvReply)
 	event = le32_to_cpu(pEvReply->Event) & 0xFF;
 
 	dctlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "%s() called\n",
-	    ioc->name, __FUNCTION__));
+	    ioc->name, __func__));
 	if(async_queue == NULL)
 		return 1;
 
@@ -2482,7 +2482,7 @@ mptctl_hp_hostinfo(unsigned long arg, unsigned int data_size)
 	 */
 	if ((mf = mpt_get_msg_frame(mptctl_id, ioc)) == NULL) {
 		dfailprintk(ioc, printk(MYIOC_s_WARN_FMT "%s, no msg frames!!\n",
-		    ioc->name,__FUNCTION__));
+		    ioc->name,__func__));
 		goto out;
 	}
 
diff --git a/drivers/message/fusion/mptfc.c b/drivers/message/fusion/mptfc.c
index b36cae9ec6db..c3c24fdf9fb6 100644
--- a/drivers/message/fusion/mptfc.c
+++ b/drivers/message/fusion/mptfc.c
@@ -231,28 +231,28 @@ static int
 mptfc_abort(struct scsi_cmnd *SCpnt)
 {
 	return
-	    mptfc_block_error_handler(SCpnt, mptscsih_abort, __FUNCTION__);
+	    mptfc_block_error_handler(SCpnt, mptscsih_abort, __func__);
 }
 
 static int
 mptfc_dev_reset(struct scsi_cmnd *SCpnt)
 {
 	return
-	    mptfc_block_error_handler(SCpnt, mptscsih_dev_reset, __FUNCTION__);
+	    mptfc_block_error_handler(SCpnt, mptscsih_dev_reset, __func__);
 }
 
 static int
 mptfc_bus_reset(struct scsi_cmnd *SCpnt)
 {
 	return
-	    mptfc_block_error_handler(SCpnt, mptscsih_bus_reset, __FUNCTION__);
+	    mptfc_block_error_handler(SCpnt, mptscsih_bus_reset, __func__);
 }
 
 static int
 mptfc_host_reset(struct scsi_cmnd *SCpnt)
 {
 	return
-	    mptfc_block_error_handler(SCpnt, mptscsih_host_reset, __FUNCTION__);
+	    mptfc_block_error_handler(SCpnt, mptscsih_host_reset, __func__);
 }
 
 static void
diff --git a/drivers/message/fusion/mptlan.c b/drivers/message/fusion/mptlan.c
index d709d92b7b30..a1abf95cf751 100644
--- a/drivers/message/fusion/mptlan.c
+++ b/drivers/message/fusion/mptlan.c
@@ -610,7 +610,7 @@ mpt_lan_send_turbo(struct net_device *dev, u32 tmsg)
 
 	dioprintk((KERN_INFO MYNAM ": %s/%s: @%s, skb %p sent.\n",
 			IOC_AND_NETDEV_NAMES_s_s(dev),
-			__FUNCTION__, sent));
+			__func__, sent));
 
 	priv->SendCtl[ctx].skb = NULL;
 	pci_unmap_single(mpt_dev->pcidev, priv->SendCtl[ctx].dma,
@@ -676,7 +676,7 @@ mpt_lan_send_reply(struct net_device *dev, LANSendReply_t *pSendRep)
 
 		dioprintk((KERN_INFO MYNAM ": %s/%s: @%s, skb %p sent.\n",
 				IOC_AND_NETDEV_NAMES_s_s(dev),
-				__FUNCTION__, sent));
+				__func__, sent));
 
 		priv->SendCtl[ctx].skb = NULL;
 		pci_unmap_single(mpt_dev->pcidev, priv->SendCtl[ctx].dma,
@@ -715,7 +715,7 @@ mpt_lan_sdu_send (struct sk_buff *skb, struct net_device *dev)
 	u16 cur_naa = 0x1000;
 
 	dioprintk((KERN_INFO MYNAM ": %s called, skb_addr = %p\n",
-			__FUNCTION__, skb));
+			__func__, skb));
 
 	spin_lock_irqsave(&priv->txfidx_lock, flags);
 	if (priv->mpt_txfidx_tail < 0) {
@@ -723,7 +723,7 @@ mpt_lan_sdu_send (struct sk_buff *skb, struct net_device *dev)
 		spin_unlock_irqrestore(&priv->txfidx_lock, flags);
 
 		printk (KERN_ERR "%s: no tx context available: %u\n",
-			__FUNCTION__, priv->mpt_txfidx_tail);
+			__func__, priv->mpt_txfidx_tail);
 		return 1;
 	}
 
@@ -733,7 +733,7 @@ mpt_lan_sdu_send (struct sk_buff *skb, struct net_device *dev)
 		spin_unlock_irqrestore(&priv->txfidx_lock, flags);
 
 		printk (KERN_ERR "%s: Unable to alloc request frame\n",
-			__FUNCTION__);
+			__func__);
 		return 1;
 	}
 
@@ -1208,7 +1208,7 @@ mpt_lan_post_receive_buckets(struct mpt_lan_priv *priv)
 
 	dioprintk((KERN_INFO MYNAM ": %s/%s: @%s, Start_buckets = %u, buckets_out = %u\n",
 			IOC_AND_NETDEV_NAMES_s_s(dev),
-			__FUNCTION__, buckets, curr));
+			__func__, buckets, curr));
 
 	max = (mpt_dev->req_sz - MPT_LAN_RECEIVE_POST_REQUEST_SIZE) /
 			(MPT_LAN_TRANSACTION32_SIZE + sizeof(SGESimple64_t));
@@ -1217,9 +1217,9 @@ mpt_lan_post_receive_buckets(struct mpt_lan_priv *priv)
 		mf = mpt_get_msg_frame(LanCtx, mpt_dev);
 		if (mf == NULL) {
 			printk (KERN_ERR "%s: Unable to alloc request frame\n",
-				__FUNCTION__);
+				__func__);
 			dioprintk((KERN_ERR "%s: %u buckets remaining\n",
-				 __FUNCTION__, buckets));
+				 __func__, buckets));
 			goto out;
 		}
 		pRecvReq = (LANReceivePostRequest_t *) mf;
@@ -1244,7 +1244,7 @@ mpt_lan_post_receive_buckets(struct mpt_lan_priv *priv)
 			spin_lock_irqsave(&priv->rxfidx_lock, flags);
 			if (priv->mpt_rxfidx_tail < 0) {
 				printk (KERN_ERR "%s: Can't alloc context\n",
-					__FUNCTION__);
+					__func__);
 				spin_unlock_irqrestore(&priv->rxfidx_lock,
 						       flags);
 				break;
@@ -1267,7 +1267,7 @@ mpt_lan_post_receive_buckets(struct mpt_lan_priv *priv)
 				if (skb == NULL) {
 					printk (KERN_WARNING
 						MYNAM "/%s: Can't alloc skb\n",
-						__FUNCTION__);
+						__func__);
 					priv->mpt_rxfidx[++priv->mpt_rxfidx_tail] = ctx;
 					spin_unlock_irqrestore(&priv->rxfidx_lock, flags);
 					break;
@@ -1305,7 +1305,7 @@ mpt_lan_post_receive_buckets(struct mpt_lan_priv *priv)
 
 		if (pSimple == NULL) {
 /**/			printk (KERN_WARNING MYNAM "/%s: No buckets posted\n",
-/**/				__FUNCTION__);
+/**/				__func__);
 			mpt_free_msg_frame(mpt_dev, mf);
 			goto out;
 		}
@@ -1329,9 +1329,9 @@ mpt_lan_post_receive_buckets(struct mpt_lan_priv *priv)
 
 out:
 	dioprintk((KERN_INFO MYNAM "/%s: End_buckets = %u, priv->buckets_out = %u\n",
-		  __FUNCTION__, buckets, atomic_read(&priv->buckets_out)));
+		  __func__, buckets, atomic_read(&priv->buckets_out)));
 	dioprintk((KERN_INFO MYNAM "/%s: Posted %u buckets and received %u back\n",
-	__FUNCTION__, priv->total_posted, priv->total_received));
+	__func__, priv->total_posted, priv->total_received));
 
 	clear_bit(0, &priv->post_buckets_active);
 }
diff --git a/drivers/message/fusion/mptsas.c b/drivers/message/fusion/mptsas.c
index b1147aa7afde..12b732512e57 100644
--- a/drivers/message/fusion/mptsas.c
+++ b/drivers/message/fusion/mptsas.c
@@ -300,7 +300,7 @@ mptsas_port_delete(MPT_ADAPTER *ioc, struct mptsas_portinfo_details * port_detai
 	phy_info = port_info->phy_info;
 
 	dsaswideprintk(ioc, printk(MYIOC_s_DEBUG_FMT "%s: [%p]: num_phys=%02d "
-	    "bitmask=0x%016llX\n", ioc->name, __FUNCTION__, port_details,
+	    "bitmask=0x%016llX\n", ioc->name, __func__, port_details,
 	    port_details->num_phys, (unsigned long long)
 	    port_details->phy_bitmask));
 
@@ -411,7 +411,7 @@ mptsas_setup_wide_ports(MPT_ADAPTER *ioc, struct mptsas_portinfo *port_info)
 		 */
 		dsaswideprintk(ioc, printk(MYIOC_s_DEBUG_FMT
 		    "%s: [%p]: deleting phy = %d\n",
-		    ioc->name, __FUNCTION__, port_details, i));
+		    ioc->name, __func__, port_details, i));
 		port_details->num_phys--;
 		port_details->phy_bitmask &= ~ (1 << phy_info->phy_id);
 		memset(&phy_info->attached, 0, sizeof(struct mptsas_devinfo));
@@ -497,7 +497,7 @@ mptsas_setup_wide_ports(MPT_ADAPTER *ioc, struct mptsas_portinfo *port_info)
 			continue;
 		dsaswideprintk(ioc, printk(MYIOC_s_DEBUG_FMT
 		    "%s: [%p]: phy_id=%02d num_phys=%02d "
-		    "bitmask=0x%016llX\n", ioc->name, __FUNCTION__,
+		    "bitmask=0x%016llX\n", ioc->name, __func__,
 		    port_details, i, port_details->num_phys,
 		    (unsigned long long)port_details->phy_bitmask));
 		dsaswideprintk(ioc, printk(MYIOC_s_DEBUG_FMT "\t\tport = %p rphy=%p\n",
@@ -553,7 +553,7 @@ mptsas_target_reset(MPT_ADAPTER *ioc, u8 channel, u8 id)
 
 	if ((mf = mpt_get_msg_frame(ioc->TaskCtx, ioc)) == NULL) {
 		dfailprintk(ioc, printk(MYIOC_s_WARN_FMT "%s, no msg frames @%d!!\n",
-		    ioc->name,__FUNCTION__, __LINE__));
+		    ioc->name,__func__, __LINE__));
 		return 0;
 	}
 
@@ -606,7 +606,7 @@ mptsas_target_reset_queue(MPT_ADAPTER *ioc,
 	    GFP_ATOMIC);
 	if (!target_reset_list) {
 		dfailprintk(ioc, printk(MYIOC_s_WARN_FMT "%s, failed to allocate mem @%d..!!\n",
-		    ioc->name,__FUNCTION__, __LINE__));
+		    ioc->name,__func__, __LINE__));
 		return;
 	}
 
@@ -673,7 +673,7 @@ mptsas_dev_reset_complete(MPT_ADAPTER *ioc)
 	ev = kzalloc(sizeof(*ev), GFP_ATOMIC);
 	if (!ev) {
 		dfailprintk(ioc, printk(MYIOC_s_WARN_FMT "%s, failed to allocate mem @%d..!!\n",
-		    ioc->name,__FUNCTION__, __LINE__));
+		    ioc->name,__func__, __LINE__));
 		return;
 	}
 
@@ -1183,7 +1183,7 @@ static int mptsas_phy_reset(struct sas_phy *phy, int hard_reset)
 	reply = (SasIoUnitControlReply_t *)ioc->sas_mgmt.reply;
 	if (reply->IOCStatus != MPI_IOCSTATUS_SUCCESS) {
 		printk(MYIOC_s_INFO_FMT "%s: IOCStatus=0x%X IOCLogInfo=0x%X\n",
-		    ioc->name, __FUNCTION__, reply->IOCStatus, reply->IOCLogInfo);
+		    ioc->name, __func__, reply->IOCStatus, reply->IOCLogInfo);
 		error = -ENXIO;
 		goto out_unlock;
 	}
@@ -1270,14 +1270,14 @@ static int mptsas_smp_handler(struct Scsi_Host *shost, struct sas_rphy *rphy,
 
 	if (!rsp) {
 		printk(MYIOC_s_ERR_FMT "%s: the smp response space is missing\n",
-		    ioc->name, __FUNCTION__);
+		    ioc->name, __func__);
 		return -EINVAL;
 	}
 
 	/* do we need to support multiple segments? */
 	if (req->bio->bi_vcnt > 1 || rsp->bio->bi_vcnt > 1) {
 		printk(MYIOC_s_ERR_FMT "%s: multiple segments req %u %u, rsp %u %u\n",
-		    ioc->name, __FUNCTION__, req->bio->bi_vcnt, req->data_len,
+		    ioc->name, __func__, req->bio->bi_vcnt, req->data_len,
 		    rsp->bio->bi_vcnt, rsp->data_len);
 		return -EINVAL;
 	}
@@ -1343,7 +1343,7 @@ static int mptsas_smp_handler(struct Scsi_Host *shost, struct sas_rphy *rphy,
 
 	timeleft = wait_for_completion_timeout(&ioc->sas_mgmt.done, 10 * HZ);
 	if (!timeleft) {
-		printk(MYIOC_s_ERR_FMT "%s: smp timeout!\n", ioc->name, __FUNCTION__);
+		printk(MYIOC_s_ERR_FMT "%s: smp timeout!\n", ioc->name, __func__);
 		/* On timeout reset the board */
 		mpt_HardResetHandler(ioc, CAN_SLEEP);
 		ret = -ETIMEDOUT;
@@ -1361,7 +1361,7 @@ static int mptsas_smp_handler(struct Scsi_Host *shost, struct sas_rphy *rphy,
 		rsp->data_len -= smprep->ResponseDataLength;
 	} else {
 		printk(MYIOC_s_ERR_FMT "%s: smp passthru reply failed to be returned\n",
-		    ioc->name, __FUNCTION__);
+		    ioc->name, __func__);
 		ret = -ENXIO;
 	}
 unmap:
@@ -2006,7 +2006,7 @@ static int mptsas_probe_one_phy(struct device *dev,
 			if (error) {
 				dfailprintk(ioc, printk(MYIOC_s_ERR_FMT
 					"%s: exit at line=%d\n", ioc->name,
-					__FUNCTION__, __LINE__));
+					__func__, __LINE__));
 				goto out;
 			}
 			mptsas_set_port(ioc, phy_info, port);
@@ -2076,7 +2076,7 @@ static int mptsas_probe_one_phy(struct device *dev,
 		if (!rphy) {
 			dfailprintk(ioc, printk(MYIOC_s_ERR_FMT
 				"%s: exit at line=%d\n", ioc->name,
-				__FUNCTION__, __LINE__));
+				__func__, __LINE__));
 			goto out;
 		}
 
@@ -2085,7 +2085,7 @@ static int mptsas_probe_one_phy(struct device *dev,
 		if (error) {
 			dfailprintk(ioc, printk(MYIOC_s_ERR_FMT
 				"%s: exit at line=%d\n", ioc->name,
-				__FUNCTION__, __LINE__));
+				__func__, __LINE__));
 			sas_rphy_free(rphy);
 			goto out;
 		}
@@ -2613,7 +2613,7 @@ mptsas_hotplug_work(struct work_struct *work)
 				    (ev->channel << 8) + ev->id)) {
 					dfailprintk(ioc, printk(MYIOC_s_ERR_FMT
 					"%s: exit at line=%d\n", ioc->name,
-						__FUNCTION__, __LINE__));
+						__func__, __LINE__));
 					break;
 				}
 				phy_info = mptsas_find_phyinfo_by_sas_address(
@@ -2633,20 +2633,20 @@ mptsas_hotplug_work(struct work_struct *work)
 		if (!phy_info){
 			dfailprintk(ioc, printk(MYIOC_s_ERR_FMT
 				"%s: exit at line=%d\n", ioc->name,
-				__FUNCTION__, __LINE__));
+				__func__, __LINE__));
 			break;
 		}
 		if (!phy_info->port_details) {
 			dfailprintk(ioc, printk(MYIOC_s_ERR_FMT
 				"%s: exit at line=%d\n", ioc->name,
-			       	__FUNCTION__, __LINE__));
+			       	__func__, __LINE__));
 			break;
 		}
 		rphy = mptsas_get_rphy(phy_info);
 		if (!rphy) {
 			dfailprintk(ioc, printk(MYIOC_s_ERR_FMT
 				"%s: exit at line=%d\n", ioc->name,
-			       	__FUNCTION__, __LINE__));
+			       	__func__, __LINE__));
 			break;
 		}
 
@@ -2654,7 +2654,7 @@ mptsas_hotplug_work(struct work_struct *work)
 		if (!port) {
 			dfailprintk(ioc, printk(MYIOC_s_ERR_FMT
 				"%s: exit at line=%d\n", ioc->name,
-			       	__FUNCTION__, __LINE__));
+			       	__func__, __LINE__));
 			break;
 		}
 
@@ -2665,7 +2665,7 @@ mptsas_hotplug_work(struct work_struct *work)
 			if (!vtarget) {
 				dfailprintk(ioc, printk(MYIOC_s_ERR_FMT
 					"%s: exit at line=%d\n", ioc->name,
-					__FUNCTION__, __LINE__));
+					__func__, __LINE__));
 				break;
 			}
 
@@ -2720,7 +2720,7 @@ mptsas_hotplug_work(struct work_struct *work)
 			(ev->channel << 8) + ev->id)) {
 				dfailprintk(ioc, printk(MYIOC_s_ERR_FMT
 					"%s: exit at line=%d\n", ioc->name,
-					__FUNCTION__, __LINE__));
+					__func__, __LINE__));
 			break;
 		}
 
@@ -2732,7 +2732,7 @@ mptsas_hotplug_work(struct work_struct *work)
 		if (!phy_info || !phy_info->port_details) {
 			dfailprintk(ioc, printk(MYIOC_s_ERR_FMT
 				"%s: exit at line=%d\n", ioc->name,
-			       	__FUNCTION__, __LINE__));
+			       	__func__, __LINE__));
 			break;
 		}
 
@@ -2744,7 +2744,7 @@ mptsas_hotplug_work(struct work_struct *work)
 			if (!vtarget) {
 				dfailprintk(ioc, printk(MYIOC_s_ERR_FMT
 				    "%s: exit at line=%d\n", ioc->name,
-				    __FUNCTION__, __LINE__));
+				    __func__, __LINE__));
 				break;
 			}
 			/*
@@ -2767,7 +2767,7 @@ mptsas_hotplug_work(struct work_struct *work)
 		if (mptsas_get_rphy(phy_info)) {
 			dfailprintk(ioc, printk(MYIOC_s_ERR_FMT
 				"%s: exit at line=%d\n", ioc->name,
-			       	__FUNCTION__, __LINE__));
+			       	__func__, __LINE__));
 			if (ev->channel) printk("%d\n", __LINE__);
 			break;
 		}
@@ -2776,7 +2776,7 @@ mptsas_hotplug_work(struct work_struct *work)
 		if (!port) {
 			dfailprintk(ioc, printk(MYIOC_s_ERR_FMT
 				"%s: exit at line=%d\n", ioc->name,
-			       	__FUNCTION__, __LINE__));
+			       	__func__, __LINE__));
 			break;
 		}
 		memcpy(&phy_info->attached, &sas_device,
@@ -2801,7 +2801,7 @@ mptsas_hotplug_work(struct work_struct *work)
 		if (!rphy) {
 			dfailprintk(ioc, printk(MYIOC_s_ERR_FMT
 				"%s: exit at line=%d\n", ioc->name,
-			       	__FUNCTION__, __LINE__));
+			       	__func__, __LINE__));
 			break; /* non-fatal: an rphy can be added later */
 		}
 
@@ -2809,7 +2809,7 @@ mptsas_hotplug_work(struct work_struct *work)
 		if (sas_rphy_add(rphy)) {
 			dfailprintk(ioc, printk(MYIOC_s_ERR_FMT
 				"%s: exit at line=%d\n", ioc->name,
-			       	__FUNCTION__, __LINE__));
+			       	__func__, __LINE__));
 			sas_rphy_free(rphy);
 			break;
 		}
diff --git a/drivers/message/fusion/mptscsih.c b/drivers/message/fusion/mptscsih.c
index d142b6b4b976..9f9354fd3516 100644
--- a/drivers/message/fusion/mptscsih.c
+++ b/drivers/message/fusion/mptscsih.c
@@ -461,7 +461,7 @@ mptscsih_issue_sep_command(MPT_ADAPTER *ioc, VirtTarget *vtarget,
 
 	if ((mf = mpt_get_msg_frame(ioc->InternalCtx, ioc)) == NULL) {
 		dfailprintk(ioc, printk(MYIOC_s_WARN_FMT "%s: no msg frames!!\n",
-		    ioc->name,__FUNCTION__));
+		    ioc->name,__func__));
 		return;
 	}
 
@@ -2187,7 +2187,7 @@ mptscsih_taskmgmt_complete(MPT_ADAPTER *ioc, MPT_FRAME_HDR *mf, MPT_FRAME_HDR *m
 				(ioc->debug_level & MPT_DEBUG_TM ))
 		printk("%s: ha=%d [%d:%d:0] task_type=0x%02X "
 			"iocstatus=0x%04X\n\tloginfo=0x%08X response_code=0x%02X "
-			"term_cmnds=%d\n", __FUNCTION__, ioc->id, pScsiTmReply->Bus,
+			"term_cmnds=%d\n", __func__, ioc->id, pScsiTmReply->Bus,
 			 pScsiTmReply->TargetID, pScsiTmReq->TaskType,
 			le16_to_cpu(pScsiTmReply->IOCStatus),
 			le32_to_cpu(pScsiTmReply->IOCLogInfo),pScsiTmReply->ResponseCode,
diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
index 9f93c29fed35..10c44d3fe01a 100644
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -19,6 +19,14 @@ config MFD_SM501
 	  interface. The device may be connected by PCI or local bus with
 	  varying functions enabled.
 
+config MFD_SM501_GPIO
+	bool "Export GPIO via GPIO layer"
+	depends on MFD_SM501 && HAVE_GPIO_LIB
+	 ---help---
+	 This option uses the gpio library layer to export the 64 GPIO
+	 lines on the SM501. The platform data is used to supply the
+	 base number for the first GPIO line to register.
+
 config MFD_ASIC3
 	bool "Support for Compaq ASIC3"
 	depends on GENERIC_HARDIRQS && HAVE_GPIO_LIB && ARM
@@ -28,7 +36,7 @@ config MFD_ASIC3
 
 config HTC_EGPIO
 	bool "HTC EGPIO support"
-	depends on GENERIC_HARDIRQS && HAVE_GPIO_LIB && ARM
+	depends on GENERIC_HARDIRQS && GPIOLIB && ARM
 	help
 	    This driver supports the CPLD egpio chip present on
 	    several HTC phones.  It provides basic support for input
@@ -42,10 +50,31 @@ config HTC_PASIC3
 	  HTC Magician devices, respectively. Actual functionality is
 	  handled by the leds-pasic3 and ds1wm drivers.
 
+config MFD_TMIO
+	bool
+	default n
+
+config MFD_T7L66XB
+	bool "Support Toshiba T7L66XB"
+	depends on ARM
+	select MFD_CORE
+	select MFD_TMIO
+	help
+	  Support for Toshiba Mobile IO Controller T7L66XB
+
+config MFD_TC6387XB
+	bool "Support Toshiba TC6387XB"
+	depends on ARM
+	select MFD_CORE
+	select MFD_TMIO
+	help
+	  Support for Toshiba Mobile IO Controller TC6387XB
+
 config MFD_TC6393XB
 	bool "Support Toshiba TC6393XB"
-	depends on HAVE_GPIO_LIB
+	depends on GPIOLIB && ARM
 	select MFD_CORE
+	select MFD_TMIO
 	help
 	  Support for Toshiba Mobile IO Controller TC6393XB
 
diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
index 33daa2f45dd8..03ad239ecef0 100644
--- a/drivers/mfd/Makefile
+++ b/drivers/mfd/Makefile
@@ -8,6 +8,8 @@ obj-$(CONFIG_MFD_ASIC3)		+= asic3.o
 obj-$(CONFIG_HTC_EGPIO)		+= htc-egpio.o
 obj-$(CONFIG_HTC_PASIC3)	+= htc-pasic3.o
 
+obj-$(CONFIG_MFD_T7L66XB)	+= t7l66xb.o
+obj-$(CONFIG_MFD_TC6387XB)	+= tc6387xb.o
 obj-$(CONFIG_MFD_TC6393XB)	+= tc6393xb.o
 
 obj-$(CONFIG_MFD_CORE)		+= mfd-core.o
diff --git a/drivers/mfd/asic3.c b/drivers/mfd/asic3.c
index 3b870e7fb3e1..bc2a807f210d 100644
--- a/drivers/mfd/asic3.c
+++ b/drivers/mfd/asic3.c
@@ -16,7 +16,6 @@
  *
  */
 
-#include <linux/version.h>
 #include <linux/kernel.h>
 #include <linux/irq.h>
 #include <linux/gpio.h>
@@ -256,28 +255,28 @@ static int asic3_gpio_irq_type(unsigned int irq, unsigned int type)
 				      bank + ASIC3_GPIO_TRIGGER_TYPE);
 	asic->irq_bothedge[(irq - asic->irq_base) >> 4] &= ~bit;
 
-	if (type == IRQT_RISING) {
+	if (type == IRQ_TYPE_EDGE_RISING) {
 		trigger |= bit;
 		edge |= bit;
-	} else if (type == IRQT_FALLING) {
+	} else if (type == IRQ_TYPE_EDGE_FALLING) {
 		trigger |= bit;
 		edge &= ~bit;
-	} else if (type == IRQT_BOTHEDGE) {
+	} else if (type == IRQ_TYPE_EDGE_BOTH) {
 		trigger |= bit;
 		if (asic3_gpio_get(&asic->gpio, irq - asic->irq_base))
 			edge &= ~bit;
 		else
 			edge |= bit;
 		asic->irq_bothedge[(irq - asic->irq_base) >> 4] |= bit;
-	} else if (type == IRQT_LOW) {
+	} else if (type == IRQ_TYPE_LEVEL_LOW) {
 		trigger &= ~bit;
 		level &= ~bit;
-	} else if (type == IRQT_HIGH) {
+	} else if (type == IRQ_TYPE_LEVEL_HIGH) {
 		trigger &= ~bit;
 		level |= bit;
 	} else {
 		/*
-		 * if type == IRQT_NOEDGE, we should mask interrupts, but
+		 * if type == IRQ_TYPE_NONE, we should mask interrupts, but
 		 * be careful to not unmask them if mask was also called.
 		 * Probably need internal state for mask.
 		 */
@@ -314,10 +313,12 @@ static int __init asic3_irq_probe(struct platform_device *pdev)
 	unsigned long clksel = 0;
 	unsigned int irq, irq_base;
 	int map_size;
+	int ret;
 
-	asic->irq_nr = platform_get_irq(pdev, 0);
-	if (asic->irq_nr < 0)
-		return asic->irq_nr;
+	ret = platform_get_irq(pdev, 0);
+	if (ret < 0)
+		return ret;
+	asic->irq_nr = ret;
 
 	/* turn on clock to IRQ controller */
 	clksel |= CLOCK_SEL_CX;
@@ -341,7 +342,7 @@ static int __init asic3_irq_probe(struct platform_device *pdev)
 			     ASIC3_INTMASK_GINTMASK);
 
 	set_irq_chained_handler(asic->irq_nr, asic3_irq_demux);
-	set_irq_type(asic->irq_nr, IRQT_RISING);
+	set_irq_type(asic->irq_nr, IRQ_TYPE_EDGE_RISING);
 	set_irq_data(asic->irq_nr, asic);
 
 	return 0;
diff --git a/drivers/mfd/htc-egpio.c b/drivers/mfd/htc-egpio.c
index 8872cc077519..6be43172dc65 100644
--- a/drivers/mfd/htc-egpio.c
+++ b/drivers/mfd/htc-egpio.c
@@ -318,6 +318,8 @@ static int __init egpio_probe(struct platform_device *pdev)
 		ei->chip[i].dev = &(pdev->dev);
 		chip = &(ei->chip[i].chip);
 		chip->label           = "htc-egpio";
+		chip->dev             = &pdev->dev;
+		chip->owner           = THIS_MODULE;
 		chip->get             = egpio_get;
 		chip->set             = egpio_set;
 		chip->direction_input = egpio_direction_input;
diff --git a/drivers/mfd/htc-pasic3.c b/drivers/mfd/htc-pasic3.c
index 633cbba072f0..91b294dcc133 100644
--- a/drivers/mfd/htc-pasic3.c
+++ b/drivers/mfd/htc-pasic3.c
@@ -238,6 +238,8 @@ static int pasic3_remove(struct platform_device *pdev)
 	return 0;
 }
 
+MODULE_ALIAS("platform:pasic3");
+
 static struct platform_driver pasic3_driver = {
 	.driver		= {
 		.name	= "pasic3",
diff --git a/drivers/mfd/mcp-sa11x0.c b/drivers/mfd/mcp-sa11x0.c
index 1eab7cffceaa..28380b20bc70 100644
--- a/drivers/mfd/mcp-sa11x0.c
+++ b/drivers/mfd/mcp-sa11x0.c
@@ -21,12 +21,12 @@
 #include <linux/platform_device.h>
 
 #include <asm/dma.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/system.h>
-#include <asm/arch/mcp.h>
+#include <mach/mcp.h>
 
-#include <asm/arch/assabet.h>
+#include <mach/assabet.h>
 
 #include "mcp.h"
 
@@ -242,6 +242,8 @@ static int mcp_sa11x0_resume(struct platform_device *dev)
 /*
  * The driver for the SA11x0 MCP port.
  */
+MODULE_ALIAS("platform:sa11x0-mcp");
+
 static struct platform_driver mcp_sa11x0_driver = {
 	.probe		= mcp_sa11x0_probe,
 	.remove		= mcp_sa11x0_remove,
diff --git a/drivers/mfd/mfd-core.c b/drivers/mfd/mfd-core.c
index d7d88ce053a6..9c9c126ed334 100644
--- a/drivers/mfd/mfd-core.c
+++ b/drivers/mfd/mfd-core.c
@@ -15,28 +15,28 @@
 #include <linux/platform_device.h>
 #include <linux/mfd/core.h>
 
-static int mfd_add_device(struct platform_device *parent,
-		const struct mfd_cell *cell,
-		struct resource *mem_base,
-		int irq_base)
+static int mfd_add_device(struct device *parent, int id,
+			  const struct mfd_cell *cell,
+			  struct resource *mem_base,
+			  int irq_base)
 {
 	struct resource res[cell->num_resources];
 	struct platform_device *pdev;
 	int ret = -ENOMEM;
 	int r;
 
-	pdev = platform_device_alloc(cell->name, parent->id);
+	pdev = platform_device_alloc(cell->name, id);
 	if (!pdev)
 		goto fail_alloc;
 
-	pdev->dev.parent = &parent->dev;
+	pdev->dev.parent = parent;
 
 	ret = platform_device_add_data(pdev,
-			cell, sizeof(struct mfd_cell));
+			cell->platform_data, cell->data_size);
 	if (ret)
 		goto fail_device;
 
-	memzero(res, sizeof(res));
+	memset(res, 0, sizeof(res));
 	for (r = 0; r < cell->num_resources; r++) {
 		res[r].name = cell->resources[r].name;
 		res[r].flags = cell->resources[r].flags;
@@ -75,17 +75,16 @@ fail_alloc:
 	return ret;
 }
 
-int mfd_add_devices(
-		struct platform_device *parent,
-		const struct mfd_cell *cells, int n_devs,
-		struct resource *mem_base,
-		int irq_base)
+int mfd_add_devices(struct device *parent, int id,
+		    const struct mfd_cell *cells, int n_devs,
+		    struct resource *mem_base,
+		    int irq_base)
 {
 	int i;
 	int ret = 0;
 
 	for (i = 0; i < n_devs; i++) {
-		ret = mfd_add_device(parent, cells + i, mem_base, irq_base);
+		ret = mfd_add_device(parent, id, cells + i, mem_base, irq_base);
 		if (ret)
 			break;
 	}
@@ -99,14 +98,13 @@ EXPORT_SYMBOL(mfd_add_devices);
 
 static int mfd_remove_devices_fn(struct device *dev, void *unused)
 {
-	platform_device_unregister(
-			container_of(dev, struct platform_device, dev));
+	platform_device_unregister(to_platform_device(dev));
 	return 0;
 }
 
-void mfd_remove_devices(struct platform_device *parent)
+void mfd_remove_devices(struct device *parent)
 {
-	device_for_each_child(&parent->dev, NULL, mfd_remove_devices_fn);
+	device_for_each_child(parent, NULL, mfd_remove_devices_fn);
 }
 EXPORT_SYMBOL(mfd_remove_devices);
 
diff --git a/drivers/mfd/sm501.c b/drivers/mfd/sm501.c
index 2fe64734d8af..7aebad4c06ff 100644
--- a/drivers/mfd/sm501.c
+++ b/drivers/mfd/sm501.c
@@ -19,6 +19,7 @@
 #include <linux/device.h>
 #include <linux/platform_device.h>
 #include <linux/pci.h>
+#include <linux/i2c-gpio.h>
 
 #include <linux/sm501.h>
 #include <linux/sm501-regs.h>
@@ -31,10 +32,37 @@ struct sm501_device {
 	struct platform_device		pdev;
 };
 
+struct sm501_gpio;
+
+#ifdef CONFIG_MFD_SM501_GPIO
+#include <linux/gpio.h>
+
+struct sm501_gpio_chip {
+	struct gpio_chip	gpio;
+	struct sm501_gpio	*ourgpio;	/* to get back to parent. */
+	void __iomem		*regbase;
+};
+
+struct sm501_gpio {
+	struct sm501_gpio_chip	low;
+	struct sm501_gpio_chip	high;
+	spinlock_t		lock;
+
+	unsigned int		 registered : 1;
+	void __iomem		*regs;
+	struct resource		*regs_res;
+};
+#else
+struct sm501_gpio {
+	/* no gpio support, empty definition for sm501_devdata. */
+};
+#endif
+
 struct sm501_devdata {
 	spinlock_t			 reg_lock;
 	struct mutex			 clock_lock;
 	struct list_head		 devices;
+	struct sm501_gpio		 gpio;
 
 	struct device			*dev;
 	struct resource			*io_res;
@@ -42,6 +70,7 @@ struct sm501_devdata {
 	struct resource			*regs_claim;
 	struct sm501_platdata		*platdata;
 
+
 	unsigned int			 in_suspend;
 	unsigned long			 pm_misc;
 
@@ -52,6 +81,7 @@ struct sm501_devdata {
 	unsigned int			 rev;
 };
 
+
 #define MHZ (1000 * 1000)
 
 #ifdef DEBUG
@@ -276,58 +306,6 @@ unsigned long sm501_modify_reg(struct device *dev,
 
 EXPORT_SYMBOL_GPL(sm501_modify_reg);
 
-unsigned long sm501_gpio_get(struct device *dev,
-			     unsigned long gpio)
-{
-	struct sm501_devdata *sm = dev_get_drvdata(dev);
-	unsigned long result;
-	unsigned long reg;
-
-	reg = (gpio > 32) ? SM501_GPIO_DATA_HIGH : SM501_GPIO_DATA_LOW;
-	result = readl(sm->regs + reg);
-
-	result >>= (gpio & 31);
-	return result & 1UL;
-}
-
-EXPORT_SYMBOL_GPL(sm501_gpio_get);
-
-void sm501_gpio_set(struct device *dev,
-		    unsigned long gpio,
-		    unsigned int to,
-		    unsigned int dir)
-{
-	struct sm501_devdata *sm = dev_get_drvdata(dev);
-
-	unsigned long bit = 1 << (gpio & 31);
-	unsigned long base;
-	unsigned long save;
-	unsigned long val;
-
-	base = (gpio > 32) ? SM501_GPIO_DATA_HIGH : SM501_GPIO_DATA_LOW;
-	base += SM501_GPIO;
-
-	spin_lock_irqsave(&sm->reg_lock, save);
-
-	val = readl(sm->regs + base) & ~bit;
-	if (to)
-		val |= bit;
-	writel(val, sm->regs + base);
-
-	val = readl(sm->regs + SM501_GPIO_DDR_LOW) & ~bit;
-	if (dir)
-		val |= bit;
-
-	writel(val, sm->regs + SM501_GPIO_DDR_LOW);
-	sm501_sync_regs(sm);
-
-	spin_unlock_irqrestore(&sm->reg_lock, save);
-
-}
-
-EXPORT_SYMBOL_GPL(sm501_gpio_set);
-
-
 /* sm501_unit_power
  *
  * alters the power active gate to set specific units on or off
@@ -906,6 +884,313 @@ static int sm501_register_display(struct sm501_devdata *sm,
 	return sm501_register_device(sm, pdev);
 }
 
+#ifdef CONFIG_MFD_SM501_GPIO
+
+static inline struct sm501_gpio_chip *to_sm501_gpio(struct gpio_chip *gc)
+{
+	return container_of(gc, struct sm501_gpio_chip, gpio);
+}
+
+static inline struct sm501_devdata *sm501_gpio_to_dev(struct sm501_gpio *gpio)
+{
+	return container_of(gpio, struct sm501_devdata, gpio);
+}
+
+static int sm501_gpio_get(struct gpio_chip *chip, unsigned offset)
+
+{
+	struct sm501_gpio_chip *smgpio = to_sm501_gpio(chip);
+	unsigned long result;
+
+	result = readl(smgpio->regbase + SM501_GPIO_DATA_LOW);
+	result >>= offset;
+
+	return result & 1UL;
+}
+
+static void sm501_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
+
+{
+	struct sm501_gpio_chip *smchip = to_sm501_gpio(chip);
+	struct sm501_gpio *smgpio = smchip->ourgpio;
+	unsigned long bit = 1 << offset;
+	void __iomem *regs = smchip->regbase;
+	unsigned long save;
+	unsigned long val;
+
+	dev_dbg(sm501_gpio_to_dev(smgpio)->dev, "%s(%p,%d)\n",
+		__func__, chip, offset);
+
+	spin_lock_irqsave(&smgpio->lock, save);
+
+	val = readl(regs + SM501_GPIO_DATA_LOW) & ~bit;
+	if (value)
+		val |= bit;
+	writel(val, regs);
+
+	sm501_sync_regs(sm501_gpio_to_dev(smgpio));
+	spin_unlock_irqrestore(&smgpio->lock, save);
+}
+
+static int sm501_gpio_input(struct gpio_chip *chip, unsigned offset)
+{
+	struct sm501_gpio_chip *smchip = to_sm501_gpio(chip);
+	struct sm501_gpio *smgpio = smchip->ourgpio;
+	void __iomem *regs = smchip->regbase;
+	unsigned long bit = 1 << offset;
+	unsigned long save;
+	unsigned long ddr;
+
+	dev_info(sm501_gpio_to_dev(smgpio)->dev, "%s(%p,%d)\n",
+		 __func__, chip, offset);
+
+	spin_lock_irqsave(&smgpio->lock, save);
+
+	ddr = readl(regs + SM501_GPIO_DDR_LOW);
+	writel(ddr & ~bit, regs + SM501_GPIO_DDR_LOW);
+
+	sm501_sync_regs(sm501_gpio_to_dev(smgpio));
+	spin_unlock_irqrestore(&smgpio->lock, save);
+
+	return 0;
+}
+
+static int sm501_gpio_output(struct gpio_chip *chip,
+			     unsigned offset, int value)
+{
+	struct sm501_gpio_chip *smchip = to_sm501_gpio(chip);
+	struct sm501_gpio *smgpio = smchip->ourgpio;
+	unsigned long bit = 1 << offset;
+	void __iomem *regs = smchip->regbase;
+	unsigned long save;
+	unsigned long val;
+	unsigned long ddr;
+
+	dev_dbg(sm501_gpio_to_dev(smgpio)->dev, "%s(%p,%d,%d)\n",
+		__func__, chip, offset, value);
+
+	spin_lock_irqsave(&smgpio->lock, save);
+
+	val = readl(regs + SM501_GPIO_DATA_LOW);
+	if (value)
+		val |= bit;
+	else
+		val &= ~bit;
+	writel(val, regs);
+
+	ddr = readl(regs + SM501_GPIO_DDR_LOW);
+	writel(ddr | bit, regs + SM501_GPIO_DDR_LOW);
+
+	sm501_sync_regs(sm501_gpio_to_dev(smgpio));
+	writel(val, regs + SM501_GPIO_DATA_LOW);
+
+	sm501_sync_regs(sm501_gpio_to_dev(smgpio));
+	spin_unlock_irqrestore(&smgpio->lock, save);
+
+	return 0;
+}
+
+static struct gpio_chip gpio_chip_template = {
+	.ngpio			= 32,
+	.direction_input	= sm501_gpio_input,
+	.direction_output	= sm501_gpio_output,
+	.set			= sm501_gpio_set,
+	.get			= sm501_gpio_get,
+};
+
+static int __devinit sm501_gpio_register_chip(struct sm501_devdata *sm,
+					      struct sm501_gpio *gpio,
+					      struct sm501_gpio_chip *chip)
+{
+	struct sm501_platdata *pdata = sm->platdata;
+	struct gpio_chip *gchip = &chip->gpio;
+	int base = pdata->gpio_base;
+
+	chip->gpio = gpio_chip_template;
+
+	if (chip == &gpio->high) {
+		if (base > 0)
+			base += 32;
+		chip->regbase = gpio->regs + SM501_GPIO_DATA_HIGH;
+		gchip->label  = "SM501-HIGH";
+	} else {
+		chip->regbase = gpio->regs + SM501_GPIO_DATA_LOW;
+		gchip->label  = "SM501-LOW";
+	}
+
+	gchip->base   = base;
+	chip->ourgpio = gpio;
+
+	return gpiochip_add(gchip);
+}
+
+static int sm501_register_gpio(struct sm501_devdata *sm)
+{
+	struct sm501_gpio *gpio = &sm->gpio;
+	resource_size_t iobase = sm->io_res->start + SM501_GPIO;
+	int ret;
+	int tmp;
+
+	dev_dbg(sm->dev, "registering gpio block %08llx\n",
+		(unsigned long long)iobase);
+
+	spin_lock_init(&gpio->lock);
+
+	gpio->regs_res = request_mem_region(iobase, 0x20, "sm501-gpio");
+	if (gpio->regs_res == NULL) {
+		dev_err(sm->dev, "gpio: failed to request region\n");
+		return -ENXIO;
+	}
+
+	gpio->regs = ioremap(iobase, 0x20);
+	if (gpio->regs == NULL) {
+		dev_err(sm->dev, "gpio: failed to remap registers\n");
+		ret = -ENXIO;
+		goto err_claimed;
+	}
+
+	/* Register both our chips. */
+
+	ret = sm501_gpio_register_chip(sm, gpio, &gpio->low);
+	if (ret) {
+		dev_err(sm->dev, "failed to add low chip\n");
+		goto err_mapped;
+	}
+
+	ret = sm501_gpio_register_chip(sm, gpio, &gpio->high);
+	if (ret) {
+		dev_err(sm->dev, "failed to add high chip\n");
+		goto err_low_chip;
+	}
+
+	gpio->registered = 1;
+
+	return 0;
+
+ err_low_chip:
+	tmp = gpiochip_remove(&gpio->low.gpio);
+	if (tmp) {
+		dev_err(sm->dev, "cannot remove low chip, cannot tidy up\n");
+		return ret;
+	}
+
+ err_mapped:
+	iounmap(gpio->regs);
+
+ err_claimed:
+	release_resource(gpio->regs_res);
+	kfree(gpio->regs_res);
+
+	return ret;
+}
+
+static void sm501_gpio_remove(struct sm501_devdata *sm)
+{
+	struct sm501_gpio *gpio = &sm->gpio;
+	int ret;
+
+	if (!sm->gpio.registered)
+		return;
+
+	ret = gpiochip_remove(&gpio->low.gpio);
+	if (ret)
+		dev_err(sm->dev, "cannot remove low chip, cannot tidy up\n");
+
+	ret = gpiochip_remove(&gpio->high.gpio);
+	if (ret)
+		dev_err(sm->dev, "cannot remove high chip, cannot tidy up\n");
+
+	iounmap(gpio->regs);
+	release_resource(gpio->regs_res);
+	kfree(gpio->regs_res);
+}
+
+static inline int sm501_gpio_pin2nr(struct sm501_devdata *sm, unsigned int pin)
+{
+	struct sm501_gpio *gpio = &sm->gpio;
+	int base = (pin < 32) ? gpio->low.gpio.base : gpio->high.gpio.base;
+
+	return (pin % 32) + base;
+}
+
+static inline int sm501_gpio_isregistered(struct sm501_devdata *sm)
+{
+	return sm->gpio.registered;
+}
+#else
+static inline int sm501_register_gpio(struct sm501_devdata *sm)
+{
+	return 0;
+}
+
+static inline void sm501_gpio_remove(struct sm501_devdata *sm)
+{
+}
+
+static inline int sm501_gpio_pin2nr(struct sm501_devdata *sm, unsigned int pin)
+{
+	return -1;
+}
+
+static inline int sm501_gpio_isregistered(struct sm501_devdata *sm)
+{
+	return 0;
+}
+#endif
+
+static int sm501_register_gpio_i2c_instance(struct sm501_devdata *sm,
+					    struct sm501_platdata_gpio_i2c *iic)
+{
+	struct i2c_gpio_platform_data *icd;
+	struct platform_device *pdev;
+
+	pdev = sm501_create_subdev(sm, "i2c-gpio", 0,
+				   sizeof(struct i2c_gpio_platform_data));
+	if (!pdev)
+		return -ENOMEM;
+
+	icd = pdev->dev.platform_data;
+
+	/* We keep the pin_sda and pin_scl fields relative in case the
+	 * same platform data is passed to >1 SM501.
+	 */
+
+	icd->sda_pin = sm501_gpio_pin2nr(sm, iic->pin_sda);
+	icd->scl_pin = sm501_gpio_pin2nr(sm, iic->pin_scl);
+	icd->timeout = iic->timeout;
+	icd->udelay = iic->udelay;
+
+	/* note, we can't use either of the pin numbers, as the i2c-gpio
+	 * driver uses the platform.id field to generate the bus number
+	 * to register with the i2c core; The i2c core doesn't have enough
+	 * entries to deal with anything we currently use.
+	*/
+
+	pdev->id = iic->bus_num;
+
+	dev_info(sm->dev, "registering i2c-%d: sda=%d (%d), scl=%d (%d)\n",
+		 iic->bus_num,
+		 icd->sda_pin, iic->pin_sda, icd->scl_pin, iic->pin_scl);
+
+	return sm501_register_device(sm, pdev);
+}
+
+static int sm501_register_gpio_i2c(struct sm501_devdata *sm,
+				   struct sm501_platdata *pdata)
+{
+	struct sm501_platdata_gpio_i2c *iic = pdata->gpio_i2c;
+	int index;
+	int ret;
+
+	for (index = 0; index < pdata->gpio_i2c_nr; index++, iic++) {
+		ret = sm501_register_gpio_i2c_instance(sm, iic);
+		if (ret < 0)
+			return ret;
+	}
+
+	return 0;
+}
+
 /* sm501_dbg_regs
  *
  * Debug attribute to attach to parent device to show core registers
@@ -1013,6 +1298,7 @@ static unsigned int sm501_mem_local[] = {
 static int sm501_init_dev(struct sm501_devdata *sm)
 {
 	struct sm501_initdata *idata;
+	struct sm501_platdata *pdata;
 	resource_size_t mem_avail;
 	unsigned long dramctrl;
 	unsigned long devid;
@@ -1051,7 +1337,9 @@ static int sm501_init_dev(struct sm501_devdata *sm)
 
 	/* check to see if we have some device initialisation */
 
-	idata = sm->platdata ? sm->platdata->init : NULL;
+	pdata = sm->platdata;
+	idata = pdata ? pdata->init : NULL;
+
 	if (idata) {
 		sm501_init_regs(sm, idata);
 
@@ -1059,6 +1347,15 @@ static int sm501_init_dev(struct sm501_devdata *sm)
 			sm501_register_usbhost(sm, &mem_avail);
 		if (idata->devices & (SM501_USE_UART0 | SM501_USE_UART1))
 			sm501_register_uart(sm, idata->devices);
+		if (idata->devices & SM501_USE_GPIO)
+			sm501_register_gpio(sm);
+	}
+
+	if (pdata->gpio_i2c != NULL && pdata->gpio_i2c_nr > 0) {
+		if (!sm501_gpio_isregistered(sm))
+			dev_err(sm->dev, "no gpio available for i2c gpio.\n");
+		else
+			sm501_register_gpio_i2c(sm, pdata);
 	}
 
 	ret = sm501_check_clocks(sm);
@@ -1138,8 +1435,31 @@ static int sm501_plat_probe(struct platform_device *dev)
 }
 
 #ifdef CONFIG_PM
+
 /* power management support */
 
+static void sm501_set_power(struct sm501_devdata *sm, int on)
+{
+	struct sm501_platdata *pd = sm->platdata;
+
+	if (pd == NULL)
+		return;
+
+	if (pd->get_power) {
+		if (pd->get_power(sm->dev) == on) {
+			dev_dbg(sm->dev, "is already %d\n", on);
+			return;
+		}
+	}
+
+	if (pd->set_power) {
+		dev_dbg(sm->dev, "setting power to %d\n", on);
+
+		pd->set_power(sm->dev, on);
+		sm501_mdelay(sm, 10);
+	}
+}
+
 static int sm501_plat_suspend(struct platform_device *pdev, pm_message_t state)
 {
 	struct sm501_devdata *sm = platform_get_drvdata(pdev);
@@ -1148,6 +1468,12 @@ static int sm501_plat_suspend(struct platform_device *pdev, pm_message_t state)
 	sm->pm_misc = readl(sm->regs + SM501_MISC_CONTROL);
 
 	sm501_dump_regs(sm);
+
+	if (sm->platdata) {
+		if (sm->platdata->flags & SM501_FLAG_SUSPEND_OFF)
+			sm501_set_power(sm, 0);
+	}
+
 	return 0;
 }
 
@@ -1155,6 +1481,8 @@ static int sm501_plat_resume(struct platform_device *pdev)
 {
 	struct sm501_devdata *sm = platform_get_drvdata(pdev);
 
+	sm501_set_power(sm, 1);
+
 	sm501_dump_regs(sm);
 	sm501_dump_gate(sm);
 	sm501_dump_clk(sm);
@@ -1229,6 +1557,7 @@ static struct sm501_platdata_fb sm501_fb_pdata = {
 static struct sm501_platdata sm501_pci_platdata = {
 	.init		= &sm501_pci_initdata,
 	.fb		= &sm501_fb_pdata,
+	.gpio_base	= -1,
 };
 
 static int sm501_pci_probe(struct pci_dev *dev,
@@ -1335,6 +1664,8 @@ static void sm501_dev_remove(struct sm501_devdata *sm)
 		sm501_remove_sub(sm, smdev);
 
 	device_remove_file(sm->dev, &dev_attr_dbg_regs);
+
+	sm501_gpio_remove(sm);
 }
 
 static void sm501_pci_remove(struct pci_dev *dev)
@@ -1378,6 +1709,8 @@ static struct pci_driver sm501_pci_drv = {
 	.remove		= sm501_pci_remove,
 };
 
+MODULE_ALIAS("platform:sm501");
+
 static struct platform_driver sm501_plat_drv = {
 	.driver		= {
 		.name	= "sm501",
diff --git a/drivers/mfd/t7l66xb.c b/drivers/mfd/t7l66xb.c
new file mode 100644
index 000000000000..49a0fffc02af
--- /dev/null
+++ b/drivers/mfd/t7l66xb.c
@@ -0,0 +1,419 @@
+/*
+ *
+ * Toshiba T7L66XB core mfd support
+ *
+ * Copyright (c) 2005, 2007, 2008 Ian Molton
+ * Copyright (c) 2008 Dmitry Baryshkov
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * T7L66 features:
+ *
+ * Supported in this driver:
+ * SD/MMC
+ * SM/NAND flash controller
+ *
+ * As yet not supported
+ * GPIO interface (on NAND pins)
+ * Serial interface
+ * TFT 'interface converter'
+ * PCMCIA interface logic
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/io.h>
+#include <linux/irq.h>
+#include <linux/platform_device.h>
+#include <linux/mfd/core.h>
+#include <linux/mfd/tmio.h>
+#include <linux/mfd/t7l66xb.h>
+
+enum {
+	T7L66XB_CELL_NAND,
+	T7L66XB_CELL_MMC,
+};
+
+#define SCR_REVID	0x08		/* b Revision ID	*/
+#define SCR_IMR		0x42		/* b Interrupt Mask	*/
+#define SCR_DEV_CTL	0xe0		/* b Device control	*/
+#define SCR_ISR		0xe1		/* b Interrupt Status	*/
+#define SCR_GPO_OC	0xf0		/* b GPO output control	*/
+#define SCR_GPO_OS	0xf1		/* b GPO output enable	*/
+#define SCR_GPI_S	0xf2		/* w GPI status		*/
+#define SCR_APDC	0xf8		/* b Active pullup down ctrl */
+
+#define SCR_DEV_CTL_USB		BIT(0)	/* USB enable		*/
+#define SCR_DEV_CTL_MMC		BIT(1)	/* MMC enable		*/
+
+/*--------------------------------------------------------------------------*/
+
+struct t7l66xb {
+	void __iomem		*scr;
+	/* Lock to protect registers requiring read/modify/write ops. */
+	spinlock_t		lock;
+
+	struct resource		rscr;
+	int			irq;
+	int			irq_base;
+};
+
+/*--------------------------------------------------------------------------*/
+
+static int t7l66xb_mmc_enable(struct platform_device *mmc)
+{
+	struct platform_device *dev = to_platform_device(mmc->dev.parent);
+	struct t7l66xb_platform_data   *pdata = dev->dev.platform_data;
+	struct t7l66xb *t7l66xb = platform_get_drvdata(dev);
+	unsigned long flags;
+	u8 dev_ctl;
+
+	if (pdata->enable_clk32k)
+		pdata->enable_clk32k(dev);
+
+	spin_lock_irqsave(&t7l66xb->lock, flags);
+
+	dev_ctl = tmio_ioread8(t7l66xb->scr + SCR_DEV_CTL);
+	dev_ctl |= SCR_DEV_CTL_MMC;
+	tmio_iowrite8(dev_ctl, t7l66xb->scr + SCR_DEV_CTL);
+
+	spin_unlock_irqrestore(&t7l66xb->lock, flags);
+
+	return 0;
+}
+
+static int t7l66xb_mmc_disable(struct platform_device *mmc)
+{
+	struct platform_device *dev = to_platform_device(mmc->dev.parent);
+	struct t7l66xb_platform_data   *pdata = dev->dev.platform_data;
+	struct t7l66xb *t7l66xb = platform_get_drvdata(dev);
+	unsigned long flags;
+	u8 dev_ctl;
+
+	spin_lock_irqsave(&t7l66xb->lock, flags);
+
+	dev_ctl = tmio_ioread8(t7l66xb->scr + SCR_DEV_CTL);
+	dev_ctl &= ~SCR_DEV_CTL_MMC;
+	tmio_iowrite8(dev_ctl, t7l66xb->scr + SCR_DEV_CTL);
+
+	spin_unlock_irqrestore(&t7l66xb->lock, flags);
+
+	if (pdata->disable_clk32k)
+		pdata->disable_clk32k(dev);
+
+	return 0;
+}
+
+/*--------------------------------------------------------------------------*/
+
+const static struct resource t7l66xb_mmc_resources[] = {
+	{
+		.start = 0x800,
+		.end	= 0x9ff,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = 0x200,
+		.end	= 0x2ff,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = IRQ_T7L66XB_MMC,
+		.end	= IRQ_T7L66XB_MMC,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+const static struct resource t7l66xb_nand_resources[] = {
+	{
+		.start	= 0xc00,
+		.end	= 0xc07,
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		.start	= 0x0100,
+		.end	= 0x01ff,
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		.start	= IRQ_T7L66XB_NAND,
+		.end	= IRQ_T7L66XB_NAND,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct mfd_cell t7l66xb_cells[] = {
+	[T7L66XB_CELL_MMC] = {
+		.name = "tmio-mmc",
+		.enable = t7l66xb_mmc_enable,
+		.disable = t7l66xb_mmc_disable,
+		.num_resources = ARRAY_SIZE(t7l66xb_mmc_resources),
+		.resources = t7l66xb_mmc_resources,
+	},
+	[T7L66XB_CELL_NAND] = {
+		.name = "tmio-nand",
+		.num_resources = ARRAY_SIZE(t7l66xb_nand_resources),
+		.resources = t7l66xb_nand_resources,
+	},
+};
+
+/*--------------------------------------------------------------------------*/
+
+/* Handle the T7L66XB interrupt mux */
+static void t7l66xb_irq(unsigned int irq, struct irq_desc *desc)
+{
+	struct t7l66xb *t7l66xb = get_irq_data(irq);
+	unsigned int isr;
+	unsigned int i, irq_base;
+
+	irq_base = t7l66xb->irq_base;
+
+	while ((isr = tmio_ioread8(t7l66xb->scr + SCR_ISR) &
+				~tmio_ioread8(t7l66xb->scr + SCR_IMR)))
+		for (i = 0; i < T7L66XB_NR_IRQS; i++)
+			if (isr & (1 << i))
+				generic_handle_irq(irq_base + i);
+}
+
+static void t7l66xb_irq_mask(unsigned int irq)
+{
+	struct t7l66xb *t7l66xb = get_irq_chip_data(irq);
+	unsigned long			flags;
+	u8 imr;
+
+	spin_lock_irqsave(&t7l66xb->lock, flags);
+	imr = tmio_ioread8(t7l66xb->scr + SCR_IMR);
+	imr |= 1 << (irq - t7l66xb->irq_base);
+	tmio_iowrite8(imr, t7l66xb->scr + SCR_IMR);
+	spin_unlock_irqrestore(&t7l66xb->lock, flags);
+}
+
+static void t7l66xb_irq_unmask(unsigned int irq)
+{
+	struct t7l66xb *t7l66xb = get_irq_chip_data(irq);
+	unsigned long flags;
+	u8 imr;
+
+	spin_lock_irqsave(&t7l66xb->lock, flags);
+	imr = tmio_ioread8(t7l66xb->scr + SCR_IMR);
+	imr &= ~(1 << (irq - t7l66xb->irq_base));
+	tmio_iowrite8(imr, t7l66xb->scr + SCR_IMR);
+	spin_unlock_irqrestore(&t7l66xb->lock, flags);
+}
+
+static struct irq_chip t7l66xb_chip = {
+	.name	= "t7l66xb",
+	.ack	= t7l66xb_irq_mask,
+	.mask	= t7l66xb_irq_mask,
+	.unmask	= t7l66xb_irq_unmask,
+};
+
+/*--------------------------------------------------------------------------*/
+
+/* Install the IRQ handler */
+static void t7l66xb_attach_irq(struct platform_device *dev)
+{
+	struct t7l66xb *t7l66xb = platform_get_drvdata(dev);
+	unsigned int irq, irq_base;
+
+	irq_base = t7l66xb->irq_base;
+
+	for (irq = irq_base; irq < irq_base + T7L66XB_NR_IRQS; irq++) {
+		set_irq_chip(irq, &t7l66xb_chip);
+		set_irq_chip_data(irq, t7l66xb);
+		set_irq_handler(irq, handle_level_irq);
+#ifdef CONFIG_ARM
+		set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
+#endif
+	}
+
+	set_irq_type(t7l66xb->irq, IRQ_TYPE_EDGE_FALLING);
+	set_irq_data(t7l66xb->irq, t7l66xb);
+	set_irq_chained_handler(t7l66xb->irq, t7l66xb_irq);
+}
+
+static void t7l66xb_detach_irq(struct platform_device *dev)
+{
+	struct t7l66xb *t7l66xb = platform_get_drvdata(dev);
+	unsigned int irq, irq_base;
+
+	irq_base = t7l66xb->irq_base;
+
+	set_irq_chained_handler(t7l66xb->irq, NULL);
+	set_irq_data(t7l66xb->irq, NULL);
+
+	for (irq = irq_base; irq < irq_base + T7L66XB_NR_IRQS; irq++) {
+#ifdef CONFIG_ARM
+		set_irq_flags(irq, 0);
+#endif
+		set_irq_chip(irq, NULL);
+		set_irq_chip_data(irq, NULL);
+	}
+}
+
+/*--------------------------------------------------------------------------*/
+
+#ifdef CONFIG_PM
+static int t7l66xb_suspend(struct platform_device *dev, pm_message_t state)
+{
+	struct t7l66xb_platform_data *pdata = dev->dev.platform_data;
+
+	if (pdata && pdata->suspend)
+		pdata->suspend(dev);
+
+	return 0;
+}
+
+static int t7l66xb_resume(struct platform_device *dev)
+{
+	struct t7l66xb_platform_data *pdata = dev->dev.platform_data;
+
+	if (pdata && pdata->resume)
+		pdata->resume(dev);
+
+	return 0;
+}
+#else
+#define t7l66xb_suspend NULL
+#define t7l66xb_resume	NULL
+#endif
+
+/*--------------------------------------------------------------------------*/
+
+static int t7l66xb_probe(struct platform_device *dev)
+{
+	struct t7l66xb_platform_data *pdata = dev->dev.platform_data;
+	struct t7l66xb *t7l66xb;
+	struct resource *iomem, *rscr;
+	int ret;
+
+	iomem = platform_get_resource(dev, IORESOURCE_MEM, 0);
+	if (!iomem)
+		return -EINVAL;
+
+	t7l66xb = kzalloc(sizeof *t7l66xb, GFP_KERNEL);
+	if (!t7l66xb)
+		return -ENOMEM;
+
+	spin_lock_init(&t7l66xb->lock);
+
+	platform_set_drvdata(dev, t7l66xb);
+
+	ret = platform_get_irq(dev, 0);
+	if (ret >= 0)
+		t7l66xb->irq = ret;
+	else
+		goto err_noirq;
+
+	t7l66xb->irq_base = pdata->irq_base;
+
+	rscr = &t7l66xb->rscr;
+	rscr->name = "t7l66xb-core";
+	rscr->start = iomem->start;
+	rscr->end = iomem->start + 0xff;
+	rscr->flags = IORESOURCE_MEM;
+
+	ret = request_resource(iomem, rscr);
+	if (ret)
+		goto err_request_scr;
+
+	t7l66xb->scr = ioremap(rscr->start, rscr->end - rscr->start + 1);
+	if (!t7l66xb->scr) {
+		ret = -ENOMEM;
+		goto err_ioremap;
+	}
+
+	if (pdata && pdata->enable)
+		pdata->enable(dev);
+
+	/* Mask all interrupts */
+	tmio_iowrite8(0xbf, t7l66xb->scr + SCR_IMR);
+
+	printk(KERN_INFO "%s rev %d @ 0x%08lx, irq %d\n",
+		dev->name, tmio_ioread8(t7l66xb->scr + SCR_REVID),
+		(unsigned long)iomem->start, t7l66xb->irq);
+
+	t7l66xb_attach_irq(dev);
+
+	t7l66xb_cells[T7L66XB_CELL_NAND].driver_data = pdata->nand_data;
+	t7l66xb_cells[T7L66XB_CELL_NAND].platform_data =
+		&t7l66xb_cells[T7L66XB_CELL_NAND];
+	t7l66xb_cells[T7L66XB_CELL_NAND].data_size =
+		sizeof(t7l66xb_cells[T7L66XB_CELL_NAND]);
+
+	t7l66xb_cells[T7L66XB_CELL_MMC].platform_data =
+		&t7l66xb_cells[T7L66XB_CELL_MMC];
+	t7l66xb_cells[T7L66XB_CELL_MMC].data_size =
+		sizeof(t7l66xb_cells[T7L66XB_CELL_MMC]);
+
+	ret = mfd_add_devices(&dev->dev, dev->id,
+			      t7l66xb_cells, ARRAY_SIZE(t7l66xb_cells),
+			      iomem, t7l66xb->irq_base);
+
+	if (!ret)
+		return 0;
+
+	t7l66xb_detach_irq(dev);
+	iounmap(t7l66xb->scr);
+err_ioremap:
+	release_resource(&t7l66xb->rscr);
+err_noirq:
+err_request_scr:
+	kfree(t7l66xb);
+	return ret;
+}
+
+static int t7l66xb_remove(struct platform_device *dev)
+{
+	struct t7l66xb_platform_data *pdata = dev->dev.platform_data;
+	struct t7l66xb *t7l66xb = platform_get_drvdata(dev);
+	int ret;
+
+	ret = pdata->disable(dev);
+
+	t7l66xb_detach_irq(dev);
+	iounmap(t7l66xb->scr);
+	release_resource(&t7l66xb->rscr);
+	mfd_remove_devices(&dev->dev);
+	platform_set_drvdata(dev, NULL);
+	kfree(t7l66xb);
+
+	return ret;
+
+}
+
+static struct platform_driver t7l66xb_platform_driver = {
+	.driver = {
+		.name	= "t7l66xb",
+		.owner	= THIS_MODULE,
+	},
+	.suspend	= t7l66xb_suspend,
+	.resume		= t7l66xb_resume,
+	.probe		= t7l66xb_probe,
+	.remove		= t7l66xb_remove,
+};
+
+/*--------------------------------------------------------------------------*/
+
+static int __init t7l66xb_init(void)
+{
+	int retval = 0;
+
+	retval = platform_driver_register(&t7l66xb_platform_driver);
+	return retval;
+}
+
+static void __exit t7l66xb_exit(void)
+{
+	platform_driver_unregister(&t7l66xb_platform_driver);
+}
+
+module_init(t7l66xb_init);
+module_exit(t7l66xb_exit);
+
+MODULE_DESCRIPTION("Toshiba T7L66XB core driver");
+MODULE_LICENSE("GPL v2");
+MODULE_AUTHOR("Ian Molton");
+MODULE_ALIAS("platform:t7l66xb");
diff --git a/drivers/mfd/tc6387xb.c b/drivers/mfd/tc6387xb.c
new file mode 100644
index 000000000000..a22b21ac6cf8
--- /dev/null
+++ b/drivers/mfd/tc6387xb.c
@@ -0,0 +1,181 @@
+/*
+ * Toshiba TC6387XB support
+ * Copyright (c) 2005 Ian Molton
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This file contains TC6387XB base support.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/err.h>
+#include <linux/mfd/core.h>
+#include <linux/mfd/tmio.h>
+#include <linux/mfd/tc6387xb.h>
+
+enum {
+	TC6387XB_CELL_MMC,
+};
+
+#ifdef CONFIG_PM
+static int tc6387xb_suspend(struct platform_device *dev, pm_message_t state)
+{
+	struct tc6387xb_platform_data *pdata = platform_get_drvdata(dev);
+
+	if (pdata && pdata->suspend)
+		pdata->suspend(dev);
+
+	return 0;
+}
+
+static int tc6387xb_resume(struct platform_device *dev)
+{
+	struct tc6387xb_platform_data *pdata = platform_get_drvdata(dev);
+
+	if (pdata && pdata->resume)
+		pdata->resume(dev);
+
+	return 0;
+}
+#else
+#define tc6387xb_suspend  NULL
+#define tc6387xb_resume   NULL
+#endif
+
+/*--------------------------------------------------------------------------*/
+
+static int tc6387xb_mmc_enable(struct platform_device *mmc)
+{
+	struct platform_device *dev      = to_platform_device(mmc->dev.parent);
+	struct tc6387xb_platform_data *tc6387xb = dev->dev.platform_data;
+
+	if (tc6387xb->enable_clk32k)
+		tc6387xb->enable_clk32k(dev);
+
+	return 0;
+}
+
+static int tc6387xb_mmc_disable(struct platform_device *mmc)
+{
+	struct platform_device *dev      = to_platform_device(mmc->dev.parent);
+	struct tc6387xb_platform_data *tc6387xb = dev->dev.platform_data;
+
+	if (tc6387xb->disable_clk32k)
+		tc6387xb->disable_clk32k(dev);
+
+	return 0;
+}
+
+/*--------------------------------------------------------------------------*/
+
+static struct resource tc6387xb_mmc_resources[] = {
+	{
+		.start = 0x800,
+		.end   = 0x9ff,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = 0x200,
+		.end   = 0x2ff,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = 0,
+		.end   = 0,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static struct mfd_cell tc6387xb_cells[] = {
+	[TC6387XB_CELL_MMC] = {
+		.name = "tmio-mmc",
+		.enable = tc6387xb_mmc_enable,
+		.disable = tc6387xb_mmc_disable,
+		.num_resources = ARRAY_SIZE(tc6387xb_mmc_resources),
+		.resources = tc6387xb_mmc_resources,
+	},
+};
+
+static int tc6387xb_probe(struct platform_device *dev)
+{
+	struct tc6387xb_platform_data *data = platform_get_drvdata(dev);
+	struct resource *iomem;
+	int irq, ret;
+
+	iomem = platform_get_resource(dev, IORESOURCE_MEM, 0);
+	if (!iomem) {
+		ret = -EINVAL;
+		goto err_resource;
+	}
+
+	ret  = platform_get_irq(dev, 0);
+	if (ret >= 0)
+		irq = ret;
+	else
+		goto err_resource;
+
+	if (data && data->enable)
+		data->enable(dev);
+
+	printk(KERN_INFO "Toshiba tc6387xb initialised\n");
+
+	tc6387xb_cells[TC6387XB_CELL_MMC].platform_data =
+		&tc6387xb_cells[TC6387XB_CELL_MMC];
+	tc6387xb_cells[TC6387XB_CELL_MMC].data_size =
+		sizeof(tc6387xb_cells[TC6387XB_CELL_MMC]);
+
+	ret = mfd_add_devices(&dev->dev, dev->id, tc6387xb_cells,
+			      ARRAY_SIZE(tc6387xb_cells), iomem, irq);
+
+	if (!ret)
+		return 0;
+
+err_resource:
+	return ret;
+}
+
+static int tc6387xb_remove(struct platform_device *dev)
+{
+	struct tc6387xb_platform_data *data = platform_get_drvdata(dev);
+
+	if (data && data->disable)
+		data->disable(dev);
+
+	/* FIXME - free the resources! */
+
+	return 0;
+}
+
+
+static struct platform_driver tc6387xb_platform_driver = {
+	.driver = {
+		.name		= "tc6387xb",
+	},
+	.probe		= tc6387xb_probe,
+	.remove		= tc6387xb_remove,
+	.suspend        = tc6387xb_suspend,
+	.resume         = tc6387xb_resume,
+};
+
+
+static int __init tc6387xb_init(void)
+{
+	return platform_driver_register(&tc6387xb_platform_driver);
+}
+
+static void __exit tc6387xb_exit(void)
+{
+	platform_driver_unregister(&tc6387xb_platform_driver);
+}
+
+module_init(tc6387xb_init);
+module_exit(tc6387xb_exit);
+
+MODULE_DESCRIPTION("Toshiba TC6387XB core driver");
+MODULE_LICENSE("GPL v2");
+MODULE_AUTHOR("Ian Molton");
+MODULE_ALIAS("platform:tc6387xb");
diff --git a/drivers/mfd/tc6393xb.c b/drivers/mfd/tc6393xb.c
index 2d87501b6fd4..e4c1c788b5f8 100644
--- a/drivers/mfd/tc6393xb.c
+++ b/drivers/mfd/tc6393xb.c
@@ -19,8 +19,8 @@
 #include <linux/io.h>
 #include <linux/irq.h>
 #include <linux/platform_device.h>
-#include <linux/fb.h>
 #include <linux/clk.h>
+#include <linux/err.h>
 #include <linux/mfd/core.h>
 #include <linux/mfd/tmio.h>
 #include <linux/mfd/tc6393xb.h>
@@ -112,6 +112,7 @@ struct tc6393xb {
 
 enum {
 	TC6393XB_CELL_NAND,
+	TC6393XB_CELL_MMC,
 };
 
 /*--------------------------------------------------------------------------*/
@@ -126,7 +127,7 @@ static int tc6393xb_nand_enable(struct platform_device *nand)
 
 	/* SMD buffer on */
 	dev_dbg(&dev->dev, "SMD buffer on\n");
-	iowrite8(0xff, tc6393xb->scr + SCR_GPI_BCR(1));
+	tmio_iowrite8(0xff, tc6393xb->scr + SCR_GPI_BCR(1));
 
 	spin_unlock_irqrestore(&tc6393xb->lock, flags);
 
@@ -135,25 +136,40 @@ static int tc6393xb_nand_enable(struct platform_device *nand)
 
 static struct resource __devinitdata tc6393xb_nand_resources[] = {
 	{
-		.name	= TMIO_NAND_CONFIG,
-		.start	= 0x0100,
-		.end	= 0x01ff,
+		.start	= 0x1000,
+		.end	= 0x1007,
 		.flags	= IORESOURCE_MEM,
 	},
 	{
-		.name	= TMIO_NAND_CONTROL,
-		.start	= 0x1000,
-		.end	= 0x1007,
+		.start	= 0x0100,
+		.end	= 0x01ff,
 		.flags	= IORESOURCE_MEM,
 	},
 	{
-		.name	= TMIO_NAND_IRQ,
 		.start	= IRQ_TC6393_NAND,
 		.end	= IRQ_TC6393_NAND,
 		.flags	= IORESOURCE_IRQ,
 	},
 };
 
+static struct resource __devinitdata tc6393xb_mmc_resources[] = {
+	{
+		.start	= 0x800,
+		.end	= 0x9ff,
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		.start	= 0x200,
+		.end	= 0x2ff,
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		.start	= IRQ_TC6393_MMC,
+		.end	= IRQ_TC6393_MMC,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
 static struct mfd_cell __devinitdata tc6393xb_cells[] = {
 	[TC6393XB_CELL_NAND] = {
 		.name = "tmio-nand",
@@ -161,6 +177,11 @@ static struct mfd_cell __devinitdata tc6393xb_cells[] = {
 		.num_resources = ARRAY_SIZE(tc6393xb_nand_resources),
 		.resources = tc6393xb_nand_resources,
 	},
+	[TC6393XB_CELL_MMC] = {
+		.name = "tmio-mmc",
+		.num_resources = ARRAY_SIZE(tc6393xb_mmc_resources),
+		.resources = tc6393xb_mmc_resources,
+	},
 };
 
 /*--------------------------------------------------------------------------*/
@@ -171,7 +192,7 @@ static int tc6393xb_gpio_get(struct gpio_chip *chip,
 	struct tc6393xb *tc6393xb = container_of(chip, struct tc6393xb, gpio);
 
 	/* XXX: does dsr also represent inputs? */
-	return ioread8(tc6393xb->scr + SCR_GPO_DSR(offset / 8))
+	return tmio_ioread8(tc6393xb->scr + SCR_GPO_DSR(offset / 8))
 		& TC_GPIO_BIT(offset);
 }
 
@@ -181,13 +202,13 @@ static void __tc6393xb_gpio_set(struct gpio_chip *chip,
 	struct tc6393xb *tc6393xb = container_of(chip, struct tc6393xb, gpio);
 	u8  dsr;
 
-	dsr = ioread8(tc6393xb->scr + SCR_GPO_DSR(offset / 8));
+	dsr = tmio_ioread8(tc6393xb->scr + SCR_GPO_DSR(offset / 8));
 	if (value)
 		dsr |= TC_GPIO_BIT(offset);
 	else
 		dsr &= ~TC_GPIO_BIT(offset);
 
-	iowrite8(dsr, tc6393xb->scr + SCR_GPO_DSR(offset / 8));
+	tmio_iowrite8(dsr, tc6393xb->scr + SCR_GPO_DSR(offset / 8));
 }
 
 static void tc6393xb_gpio_set(struct gpio_chip *chip,
@@ -212,9 +233,9 @@ static int tc6393xb_gpio_direction_input(struct gpio_chip *chip,
 
 	spin_lock_irqsave(&tc6393xb->lock, flags);
 
-	doecr = ioread8(tc6393xb->scr + SCR_GPO_DOECR(offset / 8));
+	doecr = tmio_ioread8(tc6393xb->scr + SCR_GPO_DOECR(offset / 8));
 	doecr &= ~TC_GPIO_BIT(offset);
-	iowrite8(doecr, tc6393xb->scr + SCR_GPO_DOECR(offset / 8));
+	tmio_iowrite8(doecr, tc6393xb->scr + SCR_GPO_DOECR(offset / 8));
 
 	spin_unlock_irqrestore(&tc6393xb->lock, flags);
 
@@ -232,9 +253,9 @@ static int tc6393xb_gpio_direction_output(struct gpio_chip *chip,
 
 	__tc6393xb_gpio_set(chip, offset, value);
 
-	doecr = ioread8(tc6393xb->scr + SCR_GPO_DOECR(offset / 8));
+	doecr = tmio_ioread8(tc6393xb->scr + SCR_GPO_DOECR(offset / 8));
 	doecr |= TC_GPIO_BIT(offset);
-	iowrite8(doecr, tc6393xb->scr + SCR_GPO_DOECR(offset / 8));
+	tmio_iowrite8(doecr, tc6393xb->scr + SCR_GPO_DOECR(offset / 8));
 
 	spin_unlock_irqrestore(&tc6393xb->lock, flags);
 
@@ -265,8 +286,8 @@ tc6393xb_irq(unsigned int irq, struct irq_desc *desc)
 
 	irq_base = tc6393xb->irq_base;
 
-	while ((isr = ioread8(tc6393xb->scr + SCR_ISR) &
-				~ioread8(tc6393xb->scr + SCR_IMR)))
+	while ((isr = tmio_ioread8(tc6393xb->scr + SCR_ISR) &
+				~tmio_ioread8(tc6393xb->scr + SCR_IMR)))
 		for (i = 0; i < TC6393XB_NR_IRQS; i++) {
 			if (isr & (1 << i))
 				generic_handle_irq(irq_base + i);
@@ -284,9 +305,9 @@ static void tc6393xb_irq_mask(unsigned int irq)
 	u8 imr;
 
 	spin_lock_irqsave(&tc6393xb->lock, flags);
-	imr = ioread8(tc6393xb->scr + SCR_IMR);
+	imr = tmio_ioread8(tc6393xb->scr + SCR_IMR);
 	imr |= 1 << (irq - tc6393xb->irq_base);
-	iowrite8(imr, tc6393xb->scr + SCR_IMR);
+	tmio_iowrite8(imr, tc6393xb->scr + SCR_IMR);
 	spin_unlock_irqrestore(&tc6393xb->lock, flags);
 }
 
@@ -297,9 +318,9 @@ static void tc6393xb_irq_unmask(unsigned int irq)
 	u8 imr;
 
 	spin_lock_irqsave(&tc6393xb->lock, flags);
-	imr = ioread8(tc6393xb->scr + SCR_IMR);
+	imr = tmio_ioread8(tc6393xb->scr + SCR_IMR);
 	imr &= ~(1 << (irq - tc6393xb->irq_base));
-	iowrite8(imr, tc6393xb->scr + SCR_IMR);
+	tmio_iowrite8(imr, tc6393xb->scr + SCR_IMR);
 	spin_unlock_irqrestore(&tc6393xb->lock, flags);
 }
 
@@ -324,7 +345,7 @@ static void tc6393xb_attach_irq(struct platform_device *dev)
 		set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
 	}
 
-	set_irq_type(tc6393xb->irq, IRQT_FALLING);
+	set_irq_type(tc6393xb->irq, IRQ_TYPE_EDGE_FALLING);
 	set_irq_data(tc6393xb->irq, tc6393xb);
 	set_irq_chained_handler(tc6393xb->irq, tc6393xb_irq);
 }
@@ -380,9 +401,8 @@ static int __devinit tc6393xb_probe(struct platform_device *dev)
 {
 	struct tc6393xb_platform_data *tcpd = dev->dev.platform_data;
 	struct tc6393xb *tc6393xb;
-	struct resource *iomem;
-	struct resource *rscr;
-	int retval, temp;
+	struct resource *iomem, *rscr;
+	int ret, temp;
 	int i;
 
 	iomem = platform_get_resource(dev, IORESOURCE_MEM, 0);
@@ -391,20 +411,26 @@ static int __devinit tc6393xb_probe(struct platform_device *dev)
 
 	tc6393xb = kzalloc(sizeof *tc6393xb, GFP_KERNEL);
 	if (!tc6393xb) {
-		retval = -ENOMEM;
+		ret = -ENOMEM;
 		goto err_kzalloc;
 	}
 
 	spin_lock_init(&tc6393xb->lock);
 
 	platform_set_drvdata(dev, tc6393xb);
+
+	ret = platform_get_irq(dev, 0);
+	if (ret >= 0)
+		tc6393xb->irq = ret;
+	else
+		goto err_noirq;
+
 	tc6393xb->iomem = iomem;
-	tc6393xb->irq = platform_get_irq(dev, 0);
 	tc6393xb->irq_base = tcpd->irq_base;
 
-	tc6393xb->clk = clk_get(&dev->dev, "GPIO27_CLK" /* "CK3P6MI" */);
+	tc6393xb->clk = clk_get(&dev->dev, "CLK_CK3P6MI");
 	if (IS_ERR(tc6393xb->clk)) {
-		retval = PTR_ERR(tc6393xb->clk);
+		ret = PTR_ERR(tc6393xb->clk);
 		goto err_clk_get;
 	}
 
@@ -414,67 +440,73 @@ static int __devinit tc6393xb_probe(struct platform_device *dev)
 	rscr->end = iomem->start + 0xff;
 	rscr->flags = IORESOURCE_MEM;
 
-	retval = request_resource(iomem, rscr);
-	if (retval)
+	ret = request_resource(iomem, rscr);
+	if (ret)
 		goto err_request_scr;
 
 	tc6393xb->scr = ioremap(rscr->start, rscr->end - rscr->start + 1);
 	if (!tc6393xb->scr) {
-		retval = -ENOMEM;
+		ret = -ENOMEM;
 		goto err_ioremap;
 	}
 
-	retval = clk_enable(tc6393xb->clk);
-	if (retval)
+	ret = clk_enable(tc6393xb->clk);
+	if (ret)
 		goto err_clk_enable;
 
-	retval = tcpd->enable(dev);
-	if (retval)
+	ret = tcpd->enable(dev);
+	if (ret)
 		goto err_enable;
 
 	tc6393xb->suspend_state.fer = 0;
+
 	for (i = 0; i < 3; i++) {
 		tc6393xb->suspend_state.gpo_dsr[i] =
 			(tcpd->scr_gpo_dsr >> (8 * i)) & 0xff;
 		tc6393xb->suspend_state.gpo_doecr[i] =
 			(tcpd->scr_gpo_doecr >> (8 * i)) & 0xff;
 	}
-	/*
-	 * It may be necessary to change this back to
-	 * platform-dependant code
-	 */
+
 	tc6393xb->suspend_state.ccr = SCR_CCR_UNK1 |
 					SCR_CCR_HCLK_48;
 
-	retval = tc6393xb_hw_init(dev);
-	if (retval)
+	ret = tc6393xb_hw_init(dev);
+	if (ret)
 		goto err_hw_init;
 
 	printk(KERN_INFO "Toshiba tc6393xb revision %d at 0x%08lx, irq %d\n",
-			ioread8(tc6393xb->scr + SCR_REVID),
+			tmio_ioread8(tc6393xb->scr + SCR_REVID),
 			(unsigned long) iomem->start, tc6393xb->irq);
 
 	tc6393xb->gpio.base = -1;
 
 	if (tcpd->gpio_base >= 0) {
-		retval = tc6393xb_register_gpio(tc6393xb, tcpd->gpio_base);
-		if (retval)
+		ret = tc6393xb_register_gpio(tc6393xb, tcpd->gpio_base);
+		if (ret)
 			goto err_gpio_add;
 	}
 
-	if (tc6393xb->irq)
-		tc6393xb_attach_irq(dev);
+	tc6393xb_attach_irq(dev);
 
 	tc6393xb_cells[TC6393XB_CELL_NAND].driver_data = tcpd->nand_data;
+	tc6393xb_cells[TC6393XB_CELL_NAND].platform_data =
+		&tc6393xb_cells[TC6393XB_CELL_NAND];
+	tc6393xb_cells[TC6393XB_CELL_NAND].data_size =
+		sizeof(tc6393xb_cells[TC6393XB_CELL_NAND]);
+	tc6393xb_cells[TC6393XB_CELL_MMC].platform_data =
+		&tc6393xb_cells[TC6393XB_CELL_MMC];
+	tc6393xb_cells[TC6393XB_CELL_MMC].data_size =
+		sizeof(tc6393xb_cells[TC6393XB_CELL_MMC]);
+
 
-	retval = mfd_add_devices(dev,
+	ret = mfd_add_devices(&dev->dev, dev->id,
 			tc6393xb_cells, ARRAY_SIZE(tc6393xb_cells),
 			iomem, tcpd->irq_base);
 
-	return 0;
+	if (!ret)
+		return 0;
 
-	if (tc6393xb->irq)
-		tc6393xb_detach_irq(dev);
+	tc6393xb_detach_irq(dev);
 
 err_gpio_add:
 	if (tc6393xb->gpio.base != -1)
@@ -489,10 +521,11 @@ err_ioremap:
 	release_resource(&tc6393xb->rscr);
 err_request_scr:
 	clk_put(tc6393xb->clk);
+err_noirq:
 err_clk_get:
 	kfree(tc6393xb);
 err_kzalloc:
-	return retval;
+	return ret;
 }
 
 static int __devexit tc6393xb_remove(struct platform_device *dev)
@@ -501,10 +534,8 @@ static int __devexit tc6393xb_remove(struct platform_device *dev)
 	struct tc6393xb *tc6393xb = platform_get_drvdata(dev);
 	int ret;
 
-	mfd_remove_devices(dev);
-
-	if (tc6393xb->irq)
-		tc6393xb_detach_irq(dev);
+	mfd_remove_devices(&dev->dev);
+	tc6393xb_detach_irq(dev);
 
 	if (tc6393xb->gpio.base != -1) {
 		ret = gpiochip_remove(&tc6393xb->gpio);
@@ -515,17 +546,11 @@ static int __devexit tc6393xb_remove(struct platform_device *dev)
 	}
 
 	ret = tcpd->disable(dev);
-
 	clk_disable(tc6393xb->clk);
-
 	iounmap(tc6393xb->scr);
-
 	release_resource(&tc6393xb->rscr);
-
 	platform_set_drvdata(dev, NULL);
-
 	clk_put(tc6393xb->clk);
-
 	kfree(tc6393xb);
 
 	return ret;
@@ -536,8 +561,7 @@ static int tc6393xb_suspend(struct platform_device *dev, pm_message_t state)
 {
 	struct tc6393xb_platform_data *tcpd = dev->dev.platform_data;
 	struct tc6393xb *tc6393xb = platform_get_drvdata(dev);
-	int i;
-
+	int i, ret;
 
 	tc6393xb->suspend_state.ccr = ioread16(tc6393xb->scr + SCR_CCR);
 	tc6393xb->suspend_state.fer = ioread8(tc6393xb->scr + SCR_FER);
@@ -550,14 +574,21 @@ static int tc6393xb_suspend(struct platform_device *dev, pm_message_t state)
 		tc6393xb->suspend_state.gpi_bcr[i] =
 			ioread8(tc6393xb->scr + SCR_GPI_BCR(i));
 	}
+	ret = tcpd->suspend(dev);
+	clk_disable(tc6393xb->clk);
 
-	return tcpd->suspend(dev);
+	return ret;
 }
 
 static int tc6393xb_resume(struct platform_device *dev)
 {
 	struct tc6393xb_platform_data *tcpd = dev->dev.platform_data;
-	int ret = tcpd->resume(dev);
+	struct tc6393xb *tc6393xb = platform_get_drvdata(dev);
+	int ret;
+
+	clk_enable(tc6393xb->clk);
+
+	ret = tcpd->resume(dev);
 
 	if (ret)
 		return ret;
@@ -594,7 +625,7 @@ static void __exit tc6393xb_exit(void)
 subsys_initcall(tc6393xb_init);
 module_exit(tc6393xb_exit);
 
-MODULE_LICENSE("GPL");
+MODULE_LICENSE("GPL v2");
 MODULE_AUTHOR("Ian Molton, Dmitry Baryshkov and Dirk Opfer");
 MODULE_DESCRIPTION("tc6393xb Toshiba Mobile IO Controller");
 MODULE_ALIAS("platform:tc6393xb");
diff --git a/drivers/mfd/ucb1x00-core.c b/drivers/mfd/ucb1x00-core.c
index f6b10dda31fd..a316f1b75933 100644
--- a/drivers/mfd/ucb1x00-core.c
+++ b/drivers/mfd/ucb1x00-core.c
@@ -26,7 +26,7 @@
 #include <linux/mutex.h>
 
 #include <asm/dma.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 
 #include "ucb1x00.h"
 
diff --git a/drivers/mfd/ucb1x00-ts.c b/drivers/mfd/ucb1x00-ts.c
index ad34e2d22524..44762ca86a8d 100644
--- a/drivers/mfd/ucb1x00-ts.c
+++ b/drivers/mfd/ucb1x00-ts.c
@@ -32,7 +32,7 @@
 #include <linux/kthread.h>
 
 #include <asm/dma.h>
-#include <asm/arch/collie.h>
+#include <mach/collie.h>
 #include <asm/mach-types.h>
 
 #include "ucb1x00.h"
diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig
index d5bc288b1b0d..a726f3b01a6b 100644
--- a/drivers/misc/Kconfig
+++ b/drivers/misc/Kconfig
@@ -77,11 +77,13 @@ config IBM_ASM
 	  for your IBM server.
 
 config PHANTOM
-	tristate "Sensable PHANToM"
+	tristate "Sensable PHANToM (PCI)"
 	depends on PCI
 	help
 	  Say Y here if you want to build a driver for Sensable PHANToM device.
 
+	  This driver is only for PCI PHANToMs.
+
 	  If you choose to build module, its name will be phantom. If unsure,
 	  say N here.
 
@@ -212,6 +214,18 @@ config TC1100_WMI
 	  This is a driver for the WMI extensions (wireless and bluetooth power
 	  control) of the HP Compaq TC1100 tablet.
 
+config HP_WMI
+       tristate "HP WMI extras"
+       depends on ACPI_WMI
+       depends on INPUT
+       depends on RFKILL
+       help
+         Say Y here if you want to support WMI-based hotkeys on HP laptops and
+	 to read data from WMI such as docking or ambient light sensor state.
+
+         To compile this driver as a module, choose M here: the module will
+         be called hp-wmi.
+
 config MSI_LAPTOP
         tristate "MSI Laptop Extras"
         depends on X86
@@ -346,7 +360,7 @@ config THINKPAD_ACPI_VIDEO
 	  If you are not sure, say Y here.
 
 config THINKPAD_ACPI_HOTKEY_POLL
-	bool "Suport NVRAM polling for hot keys"
+	bool "Support NVRAM polling for hot keys"
 	depends on THINKPAD_ACPI
 	default y
 	---help---
@@ -412,9 +426,11 @@ config ENCLOSURE_SERVICES
 
 config SGI_XP
 	tristate "Support communication between SGI SSIs"
-	depends on IA64_GENERIC || IA64_SGI_SN2
+	depends on NET
+	depends on (IA64_GENERIC || IA64_SGI_SN2 || IA64_SGI_UV || X86_64) && SMP
 	select IA64_UNCACHED_ALLOCATOR if IA64_GENERIC || IA64_SGI_SN2
 	select GENERIC_ALLOCATOR if IA64_GENERIC || IA64_SGI_SN2
+	select SGI_GRU if (IA64_GENERIC || IA64_SGI_UV || X86_64) && SMP
 	---help---
 	  An SGI machine can be divided into multiple Single System
 	  Images which act independently of each other and have
@@ -424,6 +440,7 @@ config SGI_XP
 
 config HP_ILO
 	tristate "Channel interface driver for HP iLO/iLO2 processor"
+	depends on PCI
 	default n
 	help
 	  The channel interface driver allows applications to communicate
@@ -435,4 +452,27 @@ config HP_ILO
 	  To compile this driver as a module, choose M here: the
 	  module will be called hpilo.
 
+config SGI_GRU
+	tristate "SGI GRU driver"
+	depends on (X86_64 || IA64_SGI_UV || IA64_GENERIC) && SMP
+	default n
+	select MMU_NOTIFIER
+	---help---
+	The GRU is a hardware resource located in the system chipset. The GRU
+	contains memory that can be mmapped into the user address space. This memory is
+	used to communicate with the GRU to perform functions such as load/store,
+	scatter/gather, bcopy, AMOs, etc.  The GRU is directly accessed by user
+	instructions using user virtual addresses. GRU instructions (ex., bcopy) use
+	user virtual addresses for operands.
+
+	If you are not running on a SGI UV system, say N.
+
+config SGI_GRU_DEBUG
+	bool  "SGI GRU driver debug"
+	depends on SGI_GRU
+	default n
+	---help---
+	This option enables addition debugging code for the SGI GRU driver. If
+	you are unsure, say N.
+
 endif # MISC_DEVICES
diff --git a/drivers/misc/Makefile b/drivers/misc/Makefile
index 688fe76135e0..c6c13f60b452 100644
--- a/drivers/misc/Makefile
+++ b/drivers/misc/Makefile
@@ -13,6 +13,7 @@ obj-$(CONFIG_ACER_WMI)		+= acer-wmi.o
 obj-$(CONFIG_ATMEL_PWM)		+= atmel_pwm.o
 obj-$(CONFIG_ATMEL_SSC)		+= atmel-ssc.o
 obj-$(CONFIG_ATMEL_TCLIB)	+= atmel_tclib.o
+obj-$(CONFIG_HP_WMI)		+= hp-wmi.o
 obj-$(CONFIG_TC1100_WMI)	+= tc1100-wmi.o
 obj-$(CONFIG_LKDTM)		+= lkdtm.o
 obj-$(CONFIG_TIFM_CORE)       	+= tifm_core.o
@@ -27,4 +28,5 @@ obj-$(CONFIG_INTEL_MENLOW)	+= intel_menlow.o
 obj-$(CONFIG_ENCLOSURE_SERVICES) += enclosure.o
 obj-$(CONFIG_KGDB_TESTS)	+= kgdbts.o
 obj-$(CONFIG_SGI_XP)		+= sgi-xp/
+obj-$(CONFIG_SGI_GRU)		+= sgi-gru/
 obj-$(CONFIG_HP_ILO)		+= hpilo.o
diff --git a/drivers/misc/acer-wmi.c b/drivers/misc/acer-wmi.c
index e7a3fe508dff..d8b0d326e452 100644
--- a/drivers/misc/acer-wmi.c
+++ b/drivers/misc/acer-wmi.c
@@ -192,6 +192,9 @@ static struct quirk_entry *quirks;
 
 static void set_quirks(void)
 {
+	if (!interface)
+		return;
+
 	if (quirks->mailled)
 		interface->capability |= ACER_CAP_MAILLED;
 
@@ -803,11 +806,30 @@ static acpi_status get_u32(u32 *value, u32 cap)
 
 static acpi_status set_u32(u32 value, u32 cap)
 {
+	acpi_status status;
+
 	if (interface->capability & cap) {
 		switch (interface->type) {
 		case ACER_AMW0:
 			return AMW0_set_u32(value, cap, interface);
 		case ACER_AMW0_V2:
+			if (cap == ACER_CAP_MAILLED)
+				return AMW0_set_u32(value, cap, interface);
+
+			/*
+			 * On some models, some WMID methods don't toggle
+			 * properly. For those cases, we want to run the AMW0
+			 * method afterwards to be certain we've really toggled
+			 * the device state.
+			 */
+			if (cap == ACER_CAP_WIRELESS ||
+				cap == ACER_CAP_BLUETOOTH) {
+				status = WMID_set_u32(value, cap, interface);
+				if (ACPI_FAILURE(status))
+					return status;
+
+				return AMW0_set_u32(value, cap, interface);
+			}
 		case ACER_WMID:
 			return WMID_set_u32(value, cap, interface);
 		default:
@@ -1167,7 +1189,7 @@ static int create_debugfs(void)
 	return 0;
 
 error_debugfs:
-		remove_debugfs();
+	remove_debugfs();
 	return -ENOMEM;
 }
 
@@ -1218,6 +1240,8 @@ static int __init acer_wmi_init(void)
 		return -ENODEV;
 	}
 
+	set_quirks();
+
 	if (platform_driver_register(&acer_platform_driver)) {
 		printk(ACER_ERR "Unable to register platform driver.\n");
 		goto error_platform_register;
@@ -1248,6 +1272,7 @@ error_platform_register:
 static void __exit acer_wmi_exit(void)
 {
 	remove_sysfs(acer_platform_device);
+	remove_debugfs();
 	platform_device_del(acer_platform_device);
 	platform_driver_unregister(&acer_platform_driver);
 
diff --git a/drivers/misc/atmel-ssc.c b/drivers/misc/atmel-ssc.c
index e171650766ce..bf5e4d065436 100644
--- a/drivers/misc/atmel-ssc.c
+++ b/drivers/misc/atmel-ssc.c
@@ -13,7 +13,6 @@
 #include <linux/clk.h>
 #include <linux/err.h>
 #include <linux/io.h>
-#include <linux/list.h>
 #include <linux/spinlock.h>
 #include <linux/atmel-ssc.h>
 
diff --git a/drivers/misc/eeepc-laptop.c b/drivers/misc/eeepc-laptop.c
index 9e8d79e7e9f4..facdb9893c84 100644
--- a/drivers/misc/eeepc-laptop.c
+++ b/drivers/misc/eeepc-laptop.c
@@ -553,9 +553,9 @@ static void eeepc_hwmon_exit(void)
 	hwmon = eeepc_hwmon_device;
 	if (!hwmon)
 		return ;
-	hwmon_device_unregister(hwmon);
 	sysfs_remove_group(&hwmon->kobj,
 			   &hwmon_attribute_group);
+	hwmon_device_unregister(hwmon);
 	eeepc_hwmon_device = NULL;
 }
 
diff --git a/drivers/misc/eeprom_93cx6.c b/drivers/misc/eeprom_93cx6.c
index ea55654e5948..15b1780025c8 100644
--- a/drivers/misc/eeprom_93cx6.c
+++ b/drivers/misc/eeprom_93cx6.c
@@ -26,7 +26,6 @@
 
 #include <linux/kernel.h>
 #include <linux/module.h>
-#include <linux/version.h>
 #include <linux/delay.h>
 #include <linux/eeprom_93cx6.h>
 
diff --git a/drivers/misc/hp-wmi.c b/drivers/misc/hp-wmi.c
new file mode 100644
index 000000000000..6d407c2a4f91
--- /dev/null
+++ b/drivers/misc/hp-wmi.c
@@ -0,0 +1,511 @@
+/*
+ * HP WMI hotkeys
+ *
+ * Copyright (C) 2008 Red Hat <mjg@redhat.com>
+ *
+ * Portions based on wistron_btns.c:
+ * Copyright (C) 2005 Miloslav Trmac <mitr@volny.cz>
+ * Copyright (C) 2005 Bernhard Rosenkraenzer <bero@arklinux.org>
+ * Copyright (C) 2005 Dmitry Torokhov <dtor@mail.ru>
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/types.h>
+#include <linux/input.h>
+#include <acpi/acpi_drivers.h>
+#include <linux/platform_device.h>
+#include <linux/acpi.h>
+#include <linux/rfkill.h>
+#include <linux/string.h>
+
+MODULE_AUTHOR("Matthew Garrett <mjg59@srcf.ucam.org>");
+MODULE_DESCRIPTION("HP laptop WMI hotkeys driver");
+MODULE_LICENSE("GPL");
+
+MODULE_ALIAS("wmi:95F24279-4D7B-4334-9387-ACCDC67EF61C");
+MODULE_ALIAS("wmi:5FB7F034-2C63-45e9-BE91-3D44E2C707E4");
+
+#define HPWMI_EVENT_GUID "95F24279-4D7B-4334-9387-ACCDC67EF61C"
+#define HPWMI_BIOS_GUID "5FB7F034-2C63-45e9-BE91-3D44E2C707E4"
+
+#define HPWMI_DISPLAY_QUERY 0x1
+#define HPWMI_HDDTEMP_QUERY 0x2
+#define HPWMI_ALS_QUERY 0x3
+#define HPWMI_DOCK_QUERY 0x4
+#define HPWMI_WIRELESS_QUERY 0x5
+#define HPWMI_HOTKEY_QUERY 0xc
+
+static int __init hp_wmi_bios_setup(struct platform_device *device);
+static int __exit hp_wmi_bios_remove(struct platform_device *device);
+
+struct bios_args {
+	u32 signature;
+	u32 command;
+	u32 commandtype;
+	u32 datasize;
+	u32 data;
+};
+
+struct bios_return {
+	u32 sigpass;
+	u32 return_code;
+	u32 value;
+};
+
+struct key_entry {
+	char type;		/* See KE_* below */
+	u16 code;
+	u16 keycode;
+};
+
+enum { KE_KEY, KE_SW, KE_END };
+
+static struct key_entry hp_wmi_keymap[] = {
+	{KE_SW, 0x01, SW_DOCK},
+	{KE_KEY, 0x02, KEY_BRIGHTNESSUP},
+	{KE_KEY, 0x03, KEY_BRIGHTNESSDOWN},
+	{KE_KEY, 0x20e6, KEY_PROG1},
+	{KE_KEY, 0x2142, KEY_MEDIA},
+	{KE_KEY, 0x231b, KEY_HELP},
+	{KE_END, 0}
+};
+
+static struct input_dev *hp_wmi_input_dev;
+static struct platform_device *hp_wmi_platform_dev;
+
+static struct rfkill *wifi_rfkill;
+static struct rfkill *bluetooth_rfkill;
+static struct rfkill *wwan_rfkill;
+
+static struct platform_driver hp_wmi_driver = {
+	.driver = {
+		   .name = "hp-wmi",
+		   .owner = THIS_MODULE,
+	},
+	.probe = hp_wmi_bios_setup,
+	.remove = hp_wmi_bios_remove,
+};
+
+static int hp_wmi_perform_query(int query, int write, int value)
+{
+	struct bios_return bios_return;
+	acpi_status status;
+	union acpi_object *obj;
+	struct bios_args args = {
+		.signature = 0x55434553,
+		.command = write ? 0x2 : 0x1,
+		.commandtype = query,
+		.datasize = write ? 0x4 : 0,
+		.data = value,
+	};
+	struct acpi_buffer input = { sizeof(struct bios_args), &args };
+	struct acpi_buffer output = { ACPI_ALLOCATE_BUFFER, NULL };
+
+	status = wmi_evaluate_method(HPWMI_BIOS_GUID, 0, 0x3, &input, &output);
+
+	obj = output.pointer;
+
+	if (!obj || obj->type != ACPI_TYPE_BUFFER)
+		return -EINVAL;
+
+	bios_return = *((struct bios_return *)obj->buffer.pointer);
+	if (bios_return.return_code > 0)
+		return bios_return.return_code * -1;
+	else
+		return bios_return.value;
+}
+
+static int hp_wmi_display_state(void)
+{
+	return hp_wmi_perform_query(HPWMI_DISPLAY_QUERY, 0, 0);
+}
+
+static int hp_wmi_hddtemp_state(void)
+{
+	return hp_wmi_perform_query(HPWMI_HDDTEMP_QUERY, 0, 0);
+}
+
+static int hp_wmi_als_state(void)
+{
+	return hp_wmi_perform_query(HPWMI_ALS_QUERY, 0, 0);
+}
+
+static int hp_wmi_dock_state(void)
+{
+	return hp_wmi_perform_query(HPWMI_DOCK_QUERY, 0, 0);
+}
+
+static int hp_wmi_wifi_set(void *data, enum rfkill_state state)
+{
+	if (state)
+		return hp_wmi_perform_query(HPWMI_WIRELESS_QUERY, 1, 0x101);
+	else
+		return hp_wmi_perform_query(HPWMI_WIRELESS_QUERY, 1, 0x100);
+}
+
+static int hp_wmi_bluetooth_set(void *data, enum rfkill_state state)
+{
+	if (state)
+		return hp_wmi_perform_query(HPWMI_WIRELESS_QUERY, 1, 0x202);
+	else
+		return hp_wmi_perform_query(HPWMI_WIRELESS_QUERY, 1, 0x200);
+}
+
+static int hp_wmi_wwan_set(void *data, enum rfkill_state state)
+{
+	if (state)
+		return hp_wmi_perform_query(HPWMI_WIRELESS_QUERY, 1, 0x404);
+	else
+		return hp_wmi_perform_query(HPWMI_WIRELESS_QUERY, 1, 0x400);
+}
+
+static int hp_wmi_wifi_state(void)
+{
+	int wireless = hp_wmi_perform_query(HPWMI_WIRELESS_QUERY, 0, 0);
+
+	if (wireless & 0x100)
+		return RFKILL_STATE_UNBLOCKED;
+	else
+		return RFKILL_STATE_SOFT_BLOCKED;
+}
+
+static int hp_wmi_bluetooth_state(void)
+{
+	int wireless = hp_wmi_perform_query(HPWMI_WIRELESS_QUERY, 0, 0);
+
+	if (wireless & 0x10000)
+		return RFKILL_STATE_UNBLOCKED;
+	else
+		return RFKILL_STATE_SOFT_BLOCKED;
+}
+
+static int hp_wmi_wwan_state(void)
+{
+	int wireless = hp_wmi_perform_query(HPWMI_WIRELESS_QUERY, 0, 0);
+
+	if (wireless & 0x1000000)
+		return RFKILL_STATE_UNBLOCKED;
+	else
+		return RFKILL_STATE_SOFT_BLOCKED;
+}
+
+static ssize_t show_display(struct device *dev, struct device_attribute *attr,
+			    char *buf)
+{
+	int value = hp_wmi_display_state();
+	if (value < 0)
+		return -EINVAL;
+	return sprintf(buf, "%d\n", value);
+}
+
+static ssize_t show_hddtemp(struct device *dev, struct device_attribute *attr,
+			    char *buf)
+{
+	int value = hp_wmi_hddtemp_state();
+	if (value < 0)
+		return -EINVAL;
+	return sprintf(buf, "%d\n", value);
+}
+
+static ssize_t show_als(struct device *dev, struct device_attribute *attr,
+			char *buf)
+{
+	int value = hp_wmi_als_state();
+	if (value < 0)
+		return -EINVAL;
+	return sprintf(buf, "%d\n", value);
+}
+
+static ssize_t show_dock(struct device *dev, struct device_attribute *attr,
+			 char *buf)
+{
+	int value = hp_wmi_dock_state();
+	if (value < 0)
+		return -EINVAL;
+	return sprintf(buf, "%d\n", value);
+}
+
+static ssize_t set_als(struct device *dev, struct device_attribute *attr,
+		       const char *buf, size_t count)
+{
+	u32 tmp = simple_strtoul(buf, NULL, 10);
+	hp_wmi_perform_query(HPWMI_ALS_QUERY, 1, tmp);
+	return count;
+}
+
+static DEVICE_ATTR(display, S_IRUGO, show_display, NULL);
+static DEVICE_ATTR(hddtemp, S_IRUGO, show_hddtemp, NULL);
+static DEVICE_ATTR(als, S_IRUGO | S_IWUSR, show_als, set_als);
+static DEVICE_ATTR(dock, S_IRUGO, show_dock, NULL);
+
+static struct key_entry *hp_wmi_get_entry_by_scancode(int code)
+{
+	struct key_entry *key;
+
+	for (key = hp_wmi_keymap; key->type != KE_END; key++)
+		if (code == key->code)
+			return key;
+
+	return NULL;
+}
+
+static struct key_entry *hp_wmi_get_entry_by_keycode(int keycode)
+{
+	struct key_entry *key;
+
+	for (key = hp_wmi_keymap; key->type != KE_END; key++)
+		if (key->type == KE_KEY && keycode == key->keycode)
+			return key;
+
+	return NULL;
+}
+
+static int hp_wmi_getkeycode(struct input_dev *dev, int scancode, int *keycode)
+{
+	struct key_entry *key = hp_wmi_get_entry_by_scancode(scancode);
+
+	if (key && key->type == KE_KEY) {
+		*keycode = key->keycode;
+		return 0;
+	}
+
+	return -EINVAL;
+}
+
+static int hp_wmi_setkeycode(struct input_dev *dev, int scancode, int keycode)
+{
+	struct key_entry *key;
+	int old_keycode;
+
+	if (keycode < 0 || keycode > KEY_MAX)
+		return -EINVAL;
+
+	key = hp_wmi_get_entry_by_scancode(scancode);
+	if (key && key->type == KE_KEY) {
+		old_keycode = key->keycode;
+		key->keycode = keycode;
+		set_bit(keycode, dev->keybit);
+		if (!hp_wmi_get_entry_by_keycode(old_keycode))
+			clear_bit(old_keycode, dev->keybit);
+		return 0;
+	}
+
+	return -EINVAL;
+}
+
+void hp_wmi_notify(u32 value, void *context)
+{
+	struct acpi_buffer response = { ACPI_ALLOCATE_BUFFER, NULL };
+	static struct key_entry *key;
+	union acpi_object *obj;
+
+	wmi_get_event_data(value, &response);
+
+	obj = (union acpi_object *)response.pointer;
+
+	if (obj && obj->type == ACPI_TYPE_BUFFER && obj->buffer.length == 8) {
+		int eventcode = *((u8 *) obj->buffer.pointer);
+		if (eventcode == 0x4)
+			eventcode = hp_wmi_perform_query(HPWMI_HOTKEY_QUERY, 0,
+							 0);
+		key = hp_wmi_get_entry_by_scancode(eventcode);
+		if (key) {
+			switch (key->type) {
+			case KE_KEY:
+				input_report_key(hp_wmi_input_dev,
+						 key->keycode, 1);
+				input_sync(hp_wmi_input_dev);
+				input_report_key(hp_wmi_input_dev,
+						 key->keycode, 0);
+				input_sync(hp_wmi_input_dev);
+				break;
+			case KE_SW:
+				input_report_switch(hp_wmi_input_dev,
+						    key->keycode,
+						    hp_wmi_dock_state());
+				input_sync(hp_wmi_input_dev);
+				break;
+			}
+		} else if (eventcode == 0x5) {
+			if (wifi_rfkill)
+				rfkill_force_state(wifi_rfkill,
+						   hp_wmi_wifi_state());
+			if (bluetooth_rfkill)
+				rfkill_force_state(bluetooth_rfkill,
+						   hp_wmi_bluetooth_state());
+			if (wwan_rfkill)
+				rfkill_force_state(wwan_rfkill,
+						   hp_wmi_wwan_state());
+		} else
+			printk(KERN_INFO "HP WMI: Unknown key pressed - %x\n",
+			       eventcode);
+	} else
+		printk(KERN_INFO "HP WMI: Unknown response received\n");
+}
+
+static int __init hp_wmi_input_setup(void)
+{
+	struct key_entry *key;
+	int err;
+
+	hp_wmi_input_dev = input_allocate_device();
+
+	hp_wmi_input_dev->name = "HP WMI hotkeys";
+	hp_wmi_input_dev->phys = "wmi/input0";
+	hp_wmi_input_dev->id.bustype = BUS_HOST;
+	hp_wmi_input_dev->getkeycode = hp_wmi_getkeycode;
+	hp_wmi_input_dev->setkeycode = hp_wmi_setkeycode;
+
+	for (key = hp_wmi_keymap; key->type != KE_END; key++) {
+		switch (key->type) {
+		case KE_KEY:
+			set_bit(EV_KEY, hp_wmi_input_dev->evbit);
+			set_bit(key->keycode, hp_wmi_input_dev->keybit);
+			break;
+		case KE_SW:
+			set_bit(EV_SW, hp_wmi_input_dev->evbit);
+			set_bit(key->keycode, hp_wmi_input_dev->swbit);
+			break;
+		}
+	}
+
+	err = input_register_device(hp_wmi_input_dev);
+
+	if (err) {
+		input_free_device(hp_wmi_input_dev);
+		return err;
+	}
+
+	return 0;
+}
+
+static void cleanup_sysfs(struct platform_device *device)
+{
+	device_remove_file(&device->dev, &dev_attr_display);
+	device_remove_file(&device->dev, &dev_attr_hddtemp);
+	device_remove_file(&device->dev, &dev_attr_als);
+	device_remove_file(&device->dev, &dev_attr_dock);
+}
+
+static int __init hp_wmi_bios_setup(struct platform_device *device)
+{
+	int err;
+	int wireless = hp_wmi_perform_query(HPWMI_WIRELESS_QUERY, 0, 0);
+
+	err = device_create_file(&device->dev, &dev_attr_display);
+	if (err)
+		goto add_sysfs_error;
+	err = device_create_file(&device->dev, &dev_attr_hddtemp);
+	if (err)
+		goto add_sysfs_error;
+	err = device_create_file(&device->dev, &dev_attr_als);
+	if (err)
+		goto add_sysfs_error;
+	err = device_create_file(&device->dev, &dev_attr_dock);
+	if (err)
+		goto add_sysfs_error;
+
+	if (wireless & 0x1) {
+		wifi_rfkill = rfkill_allocate(&device->dev, RFKILL_TYPE_WLAN);
+		wifi_rfkill->name = "hp-wifi";
+		wifi_rfkill->state = hp_wmi_wifi_state();
+		wifi_rfkill->toggle_radio = hp_wmi_wifi_set;
+		wifi_rfkill->user_claim_unsupported = 1;
+		rfkill_register(wifi_rfkill);
+	}
+
+	if (wireless & 0x2) {
+		bluetooth_rfkill = rfkill_allocate(&device->dev,
+						   RFKILL_TYPE_BLUETOOTH);
+		bluetooth_rfkill->name = "hp-bluetooth";
+		bluetooth_rfkill->state = hp_wmi_bluetooth_state();
+		bluetooth_rfkill->toggle_radio = hp_wmi_bluetooth_set;
+		bluetooth_rfkill->user_claim_unsupported = 1;
+		rfkill_register(bluetooth_rfkill);
+	}
+
+	if (wireless & 0x4) {
+		wwan_rfkill = rfkill_allocate(&device->dev, RFKILL_TYPE_WWAN);
+		wwan_rfkill->name = "hp-wwan";
+		wwan_rfkill->state = hp_wmi_wwan_state();
+		wwan_rfkill->toggle_radio = hp_wmi_wwan_set;
+		wwan_rfkill->user_claim_unsupported = 1;
+		rfkill_register(wwan_rfkill);
+	}
+
+	return 0;
+add_sysfs_error:
+	cleanup_sysfs(device);
+	return err;
+}
+
+static int __exit hp_wmi_bios_remove(struct platform_device *device)
+{
+	cleanup_sysfs(device);
+
+	if (wifi_rfkill)
+		rfkill_unregister(wifi_rfkill);
+	if (bluetooth_rfkill)
+		rfkill_unregister(bluetooth_rfkill);
+	if (wwan_rfkill)
+		rfkill_unregister(wwan_rfkill);
+
+	return 0;
+}
+
+static int __init hp_wmi_init(void)
+{
+	int err;
+
+	if (wmi_has_guid(HPWMI_EVENT_GUID)) {
+		err = wmi_install_notify_handler(HPWMI_EVENT_GUID,
+						 hp_wmi_notify, NULL);
+		if (!err)
+			hp_wmi_input_setup();
+	}
+
+	if (wmi_has_guid(HPWMI_BIOS_GUID)) {
+		err = platform_driver_register(&hp_wmi_driver);
+		if (err)
+			return 0;
+		hp_wmi_platform_dev = platform_device_alloc("hp-wmi", -1);
+		if (!hp_wmi_platform_dev) {
+			platform_driver_unregister(&hp_wmi_driver);
+			return 0;
+		}
+		platform_device_add(hp_wmi_platform_dev);
+	}
+
+	return 0;
+}
+
+static void __exit hp_wmi_exit(void)
+{
+	if (wmi_has_guid(HPWMI_EVENT_GUID)) {
+		wmi_remove_notify_handler(HPWMI_EVENT_GUID);
+		input_unregister_device(hp_wmi_input_dev);
+	}
+	if (hp_wmi_platform_dev) {
+		platform_device_del(hp_wmi_platform_dev);
+		platform_driver_unregister(&hp_wmi_driver);
+	}
+}
+
+module_init(hp_wmi_init);
+module_exit(hp_wmi_exit);
diff --git a/drivers/misc/phantom.c b/drivers/misc/phantom.c
index 4ce3bdc2f959..daf585689ce3 100644
--- a/drivers/misc/phantom.c
+++ b/drivers/misc/phantom.c
@@ -563,6 +563,6 @@ module_init(phantom_init);
 module_exit(phantom_exit);
 
 MODULE_AUTHOR("Jiri Slaby <jirislaby@gmail.com>");
-MODULE_DESCRIPTION("Sensable Phantom driver");
+MODULE_DESCRIPTION("Sensable Phantom driver (PCI devices)");
 MODULE_LICENSE("GPL");
 MODULE_VERSION(PHANTOM_VERSION);
diff --git a/drivers/misc/sgi-gru/Makefile b/drivers/misc/sgi-gru/Makefile
new file mode 100644
index 000000000000..d03597a521b0
--- /dev/null
+++ b/drivers/misc/sgi-gru/Makefile
@@ -0,0 +1,3 @@
+obj-$(CONFIG_SGI_GRU) := gru.o
+gru-y := grufile.o grumain.o grufault.o grutlbpurge.o gruprocfs.o grukservices.o
+
diff --git a/drivers/misc/sgi-gru/gru.h b/drivers/misc/sgi-gru/gru.h
new file mode 100644
index 000000000000..40df7cb3f0a5
--- /dev/null
+++ b/drivers/misc/sgi-gru/gru.h
@@ -0,0 +1,67 @@
+/*
+ *  Copyright (c) 2008 Silicon Graphics, Inc.  All Rights Reserved.
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU Lesser General Public License as published by
+ *  the Free Software Foundation; either version 2.1 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU Lesser General Public License for more details.
+ *
+ *  You should have received a copy of the GNU Lesser General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+
+#ifndef __GRU_H__
+#define __GRU_H__
+
+/*
+ * GRU architectural definitions
+ */
+#define GRU_CACHE_LINE_BYTES		64
+#define GRU_HANDLE_STRIDE		256
+#define GRU_CB_BASE			0
+#define GRU_DS_BASE			0x20000
+
+/*
+ * Size used to map GRU GSeg
+ */
+#if defined CONFIG_IA64
+#define GRU_GSEG_PAGESIZE	(256 * 1024UL)
+#elif defined CONFIG_X86_64
+#define GRU_GSEG_PAGESIZE	(256 * 1024UL)		/* ZZZ 2MB ??? */
+#else
+#error "Unsupported architecture"
+#endif
+
+/*
+ * Structure for obtaining GRU resource information
+ */
+struct gru_chiplet_info {
+	int	node;
+	int	chiplet;
+	int	blade;
+	int	total_dsr_bytes;
+	int	total_cbr;
+	int	total_user_dsr_bytes;
+	int	total_user_cbr;
+	int	free_user_dsr_bytes;
+	int	free_user_cbr;
+};
+
+/* Flags for GRU options on the gru_create_context() call */
+/* Select one of the follow 4 options to specify how TLB misses are handled */
+#define GRU_OPT_MISS_DEFAULT	0x0000	/* Use default mode */
+#define GRU_OPT_MISS_USER_POLL	0x0001	/* User will poll CB for faults */
+#define GRU_OPT_MISS_FMM_INTR	0x0002	/* Send interrupt to cpu to
+					   handle fault */
+#define GRU_OPT_MISS_FMM_POLL	0x0003	/* Use system polling thread */
+#define GRU_OPT_MISS_MASK	0x0003	/* Mask for TLB MISS option */
+
+
+
+#endif		/* __GRU_H__ */
diff --git a/drivers/misc/sgi-gru/gru_instructions.h b/drivers/misc/sgi-gru/gru_instructions.h
new file mode 100644
index 000000000000..0dc36225c7c6
--- /dev/null
+++ b/drivers/misc/sgi-gru/gru_instructions.h
@@ -0,0 +1,669 @@
+/*
+ *  Copyright (c) 2008 Silicon Graphics, Inc.  All Rights Reserved.
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU Lesser General Public License as published by
+ *  the Free Software Foundation; either version 2.1 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU Lesser General Public License for more details.
+ *
+ *  You should have received a copy of the GNU Lesser General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+
+#ifndef __GRU_INSTRUCTIONS_H__
+#define __GRU_INSTRUCTIONS_H__
+
+#define gru_flush_cache_hook(p)
+#define gru_emulator_wait_hook(p, w)
+
+/*
+ * Architecture dependent functions
+ */
+
+#if defined CONFIG_IA64
+#include <linux/compiler.h>
+#include <asm/intrinsics.h>
+#define __flush_cache(p)		ia64_fc(p)
+/* Use volatile on IA64 to ensure ordering via st4.rel */
+#define gru_ordered_store_int(p,v)					\
+		do {							\
+			barrier();					\
+			*((volatile int *)(p)) = v; /* force st.rel */	\
+		} while (0)
+#elif defined CONFIG_X86_64
+#define __flush_cache(p)		clflush(p)
+#define gru_ordered_store_int(p,v)					\
+		do {							\
+			barrier();					\
+			*(int *)p = v;					\
+		} while (0)
+#else
+#error "Unsupported architecture"
+#endif
+
+/*
+ * Control block status and exception codes
+ */
+#define CBS_IDLE			0
+#define CBS_EXCEPTION			1
+#define CBS_ACTIVE			2
+#define CBS_CALL_OS			3
+
+/* CB substatus bitmasks */
+#define CBSS_MSG_QUEUE_MASK		7
+#define CBSS_IMPLICIT_ABORT_ACTIVE_MASK	8
+
+/* CB substatus message queue values (low 3 bits of substatus) */
+#define CBSS_NO_ERROR			0
+#define CBSS_LB_OVERFLOWED		1
+#define CBSS_QLIMIT_REACHED		2
+#define CBSS_PAGE_OVERFLOW		3
+#define CBSS_AMO_NACKED			4
+#define CBSS_PUT_NACKED			5
+
+/*
+ * Structure used to fetch exception detail for CBs that terminate with
+ * CBS_EXCEPTION
+ */
+struct control_block_extended_exc_detail {
+	unsigned long	cb;
+	int		opc;
+	int		ecause;
+	int		exopc;
+	long		exceptdet0;
+	int		exceptdet1;
+};
+
+/*
+ * Instruction formats
+ */
+
+/*
+ * Generic instruction format.
+ * This definition has precise bit field definitions.
+ */
+struct gru_instruction_bits {
+    /* DW 0  - low */
+    unsigned int		icmd:      1;
+    unsigned char		ima:	   3;	/* CB_DelRep, unmapped mode */
+    unsigned char		reserved0: 4;
+    unsigned int		xtype:     3;
+    unsigned int		iaa0:      2;
+    unsigned int		iaa1:      2;
+    unsigned char		reserved1: 1;
+    unsigned char		opc:       8;	/* opcode */
+    unsigned char		exopc:     8;	/* extended opcode */
+    /* DW 0  - high */
+    unsigned int		idef2:    22;	/* TRi0 */
+    unsigned char		reserved2: 2;
+    unsigned char		istatus:   2;
+    unsigned char		isubstatus:4;
+    unsigned char		reserved3: 2;
+    /* DW 1 */
+    unsigned long		idef4;		/* 42 bits: TRi1, BufSize */
+    /* DW 2-6 */
+    unsigned long		idef1;		/* BAddr0 */
+    unsigned long		idef5;		/* Nelem */
+    unsigned long		idef6;		/* Stride, Operand1 */
+    unsigned long		idef3;		/* BAddr1, Value, Operand2 */
+    unsigned long		reserved4;
+    /* DW 7 */
+    unsigned long		avalue;		 /* AValue */
+};
+
+/*
+ * Generic instruction with friendlier names. This format is used
+ * for inline instructions.
+ */
+struct gru_instruction {
+    /* DW 0 */
+    unsigned int		op32;    /* icmd,xtype,iaa0,ima,opc */
+    unsigned int		tri0;
+    unsigned long		tri1_bufsize;		/* DW 1 */
+    unsigned long		baddr0;			/* DW 2 */
+    unsigned long		nelem;			/* DW 3 */
+    unsigned long		op1_stride;		/* DW 4 */
+    unsigned long		op2_value_baddr1;	/* DW 5 */
+    unsigned long		reserved0;		/* DW 6 */
+    unsigned long		avalue;			/* DW 7 */
+};
+
+/* Some shifts and masks for the low 32 bits of a GRU command */
+#define GRU_CB_ICMD_SHFT	0
+#define GRU_CB_ICMD_MASK	0x1
+#define GRU_CB_XTYPE_SHFT	8
+#define GRU_CB_XTYPE_MASK	0x7
+#define GRU_CB_IAA0_SHFT	11
+#define GRU_CB_IAA0_MASK	0x3
+#define GRU_CB_IAA1_SHFT	13
+#define GRU_CB_IAA1_MASK	0x3
+#define GRU_CB_IMA_SHFT		1
+#define GRU_CB_IMA_MASK		0x3
+#define GRU_CB_OPC_SHFT		16
+#define GRU_CB_OPC_MASK		0xff
+#define GRU_CB_EXOPC_SHFT	24
+#define GRU_CB_EXOPC_MASK	0xff
+
+/* GRU instruction opcodes (opc field) */
+#define OP_NOP		0x00
+#define OP_BCOPY	0x01
+#define OP_VLOAD	0x02
+#define OP_IVLOAD	0x03
+#define OP_VSTORE	0x04
+#define OP_IVSTORE	0x05
+#define OP_VSET		0x06
+#define OP_IVSET	0x07
+#define OP_MESQ		0x08
+#define OP_GAMXR	0x09
+#define OP_GAMIR	0x0a
+#define OP_GAMIRR	0x0b
+#define OP_GAMER	0x0c
+#define OP_GAMERR	0x0d
+#define OP_BSTORE	0x0e
+#define OP_VFLUSH	0x0f
+
+
+/* Extended opcodes values (exopc field) */
+
+/* GAMIR - AMOs with implicit operands */
+#define EOP_IR_FETCH	0x01 /* Plain fetch of memory */
+#define EOP_IR_CLR	0x02 /* Fetch and clear */
+#define EOP_IR_INC	0x05 /* Fetch and increment */
+#define EOP_IR_DEC	0x07 /* Fetch and decrement */
+#define EOP_IR_QCHK1	0x0d /* Queue check, 64 byte msg */
+#define EOP_IR_QCHK2	0x0e /* Queue check, 128 byte msg */
+
+/* GAMIRR - Registered AMOs with implicit operands */
+#define EOP_IRR_FETCH	0x01 /* Registered fetch of memory */
+#define EOP_IRR_CLR	0x02 /* Registered fetch and clear */
+#define EOP_IRR_INC	0x05 /* Registered fetch and increment */
+#define EOP_IRR_DEC	0x07 /* Registered fetch and decrement */
+#define EOP_IRR_DECZ	0x0f /* Registered fetch and decrement, update on zero*/
+
+/* GAMER - AMOs with explicit operands */
+#define EOP_ER_SWAP	0x00 /* Exchange argument and memory */
+#define EOP_ER_OR	0x01 /* Logical OR with memory */
+#define EOP_ER_AND	0x02 /* Logical AND with memory */
+#define EOP_ER_XOR	0x03 /* Logical XOR with memory */
+#define EOP_ER_ADD	0x04 /* Add value to memory */
+#define EOP_ER_CSWAP	0x08 /* Compare with operand2, write operand1 if match*/
+#define EOP_ER_CADD	0x0c /* Queue check, operand1*64 byte msg */
+
+/* GAMERR - Registered AMOs with explicit operands */
+#define EOP_ERR_SWAP	0x00 /* Exchange argument and memory */
+#define EOP_ERR_OR	0x01 /* Logical OR with memory */
+#define EOP_ERR_AND	0x02 /* Logical AND with memory */
+#define EOP_ERR_XOR	0x03 /* Logical XOR with memory */
+#define EOP_ERR_ADD	0x04 /* Add value to memory */
+#define EOP_ERR_CSWAP	0x08 /* Compare with operand2, write operand1 if match*/
+#define EOP_ERR_EPOLL	0x09 /* Poll for equality */
+#define EOP_ERR_NPOLL	0x0a /* Poll for inequality */
+
+/* GAMXR - SGI Arithmetic unit */
+#define EOP_XR_CSWAP	0x0b /* Masked compare exchange */
+
+
+/* Transfer types (xtype field) */
+#define XTYPE_B		0x0	/* byte */
+#define XTYPE_S		0x1	/* short (2-byte) */
+#define XTYPE_W		0x2	/* word (4-byte) */
+#define XTYPE_DW	0x3	/* doubleword (8-byte) */
+#define XTYPE_CL	0x6	/* cacheline (64-byte) */
+
+
+/* Instruction access attributes (iaa0, iaa1 fields) */
+#define IAA_RAM		0x0	/* normal cached RAM access */
+#define IAA_NCRAM	0x2	/* noncoherent RAM access */
+#define IAA_MMIO	0x1	/* noncoherent memory-mapped I/O space */
+#define IAA_REGISTER	0x3	/* memory-mapped registers, etc. */
+
+
+/* Instruction mode attributes (ima field) */
+#define IMA_MAPPED	0x0	/* Virtual mode  */
+#define IMA_CB_DELAY	0x1	/* hold read responses until status changes */
+#define IMA_UNMAPPED	0x2	/* bypass the TLBs (OS only) */
+#define IMA_INTERRUPT	0x4	/* Interrupt when instruction completes */
+
+/* CBE ecause bits */
+#define CBE_CAUSE_RI				(1 << 0)
+#define CBE_CAUSE_INVALID_INSTRUCTION		(1 << 1)
+#define CBE_CAUSE_UNMAPPED_MODE_FORBIDDEN	(1 << 2)
+#define CBE_CAUSE_PE_CHECK_DATA_ERROR		(1 << 3)
+#define CBE_CAUSE_IAA_GAA_MISMATCH		(1 << 4)
+#define CBE_CAUSE_DATA_SEGMENT_LIMIT_EXCEPTION	(1 << 5)
+#define CBE_CAUSE_OS_FATAL_TLB_FAULT		(1 << 6)
+#define CBE_CAUSE_EXECUTION_HW_ERROR		(1 << 7)
+#define CBE_CAUSE_TLBHW_ERROR			(1 << 8)
+#define CBE_CAUSE_RA_REQUEST_TIMEOUT		(1 << 9)
+#define CBE_CAUSE_HA_REQUEST_TIMEOUT		(1 << 10)
+#define CBE_CAUSE_RA_RESPONSE_FATAL		(1 << 11)
+#define CBE_CAUSE_RA_RESPONSE_NON_FATAL		(1 << 12)
+#define CBE_CAUSE_HA_RESPONSE_FATAL		(1 << 13)
+#define CBE_CAUSE_HA_RESPONSE_NON_FATAL		(1 << 14)
+#define CBE_CAUSE_ADDRESS_SPACE_DECODE_ERROR	(1 << 15)
+#define CBE_CAUSE_RESPONSE_DATA_ERROR		(1 << 16)
+#define CBE_CAUSE_PROTOCOL_STATE_DATA_ERROR	(1 << 17)
+
+/*
+ * Exceptions are retried for the following cases. If any OTHER bits are set
+ * in ecause, the exception is not retryable.
+ */
+#define EXCEPTION_RETRY_BITS (CBE_CAUSE_RESPONSE_DATA_ERROR |		\
+			      CBE_CAUSE_RA_REQUEST_TIMEOUT |		\
+			      CBE_CAUSE_TLBHW_ERROR |			\
+			      CBE_CAUSE_HA_REQUEST_TIMEOUT)
+
+/* Message queue head structure */
+union gru_mesqhead {
+	unsigned long	val;
+	struct {
+		unsigned int	head;
+		unsigned int	limit;
+	};
+};
+
+
+/* Generate the low word of a GRU instruction */
+static inline unsigned int
+__opword(unsigned char opcode, unsigned char exopc, unsigned char xtype,
+       unsigned char iaa0, unsigned char iaa1,
+       unsigned char ima)
+{
+    return (1 << GRU_CB_ICMD_SHFT) |
+	   (iaa0 << GRU_CB_IAA0_SHFT) |
+	   (iaa1 << GRU_CB_IAA1_SHFT) |
+	   (ima << GRU_CB_IMA_SHFT) |
+	   (xtype << GRU_CB_XTYPE_SHFT) |
+	   (opcode << GRU_CB_OPC_SHFT) |
+	   (exopc << GRU_CB_EXOPC_SHFT);
+}
+
+/*
+ * Architecture specific intrinsics
+ */
+static inline void gru_flush_cache(void *p)
+{
+	__flush_cache(p);
+}
+
+/*
+ * Store the lower 32 bits of the command including the "start" bit. Then
+ * start the instruction executing.
+ */
+static inline void gru_start_instruction(struct gru_instruction *ins, int op32)
+{
+	gru_ordered_store_int(ins, op32);
+}
+
+
+/* Convert "hints" to IMA */
+#define CB_IMA(h)		((h) | IMA_UNMAPPED)
+
+/* Convert data segment cache line index into TRI0 / TRI1 value */
+#define GRU_DINDEX(i)		((i) * GRU_CACHE_LINE_BYTES)
+
+/* Inline functions for GRU instructions.
+ *     Note:
+ *     	- nelem and stride are in elements
+ *     	- tri0/tri1 is in bytes for the beginning of the data segment.
+ */
+static inline void gru_vload(void *cb, unsigned long mem_addr,
+		unsigned int tri0, unsigned char xtype, unsigned long nelem,
+		unsigned long stride, unsigned long hints)
+{
+	struct gru_instruction *ins = (struct gru_instruction *)cb;
+
+	ins->baddr0 = (long)mem_addr;
+	ins->nelem = nelem;
+	ins->tri0 = tri0;
+	ins->op1_stride = stride;
+	gru_start_instruction(ins, __opword(OP_VLOAD, 0, xtype, IAA_RAM, 0,
+					CB_IMA(hints)));
+}
+
+static inline void gru_vstore(void *cb, unsigned long mem_addr,
+		unsigned int tri0, unsigned char xtype, unsigned long nelem,
+		unsigned long stride, unsigned long hints)
+{
+	struct gru_instruction *ins = (void *)cb;
+
+	ins->baddr0 = (long)mem_addr;
+	ins->nelem = nelem;
+	ins->tri0 = tri0;
+	ins->op1_stride = stride;
+	gru_start_instruction(ins, __opword(OP_VSTORE, 0, xtype, IAA_RAM, 0,
+					CB_IMA(hints)));
+}
+
+static inline void gru_ivload(void *cb, unsigned long mem_addr,
+		unsigned int tri0, unsigned int tri1, unsigned char xtype,
+		unsigned long nelem, unsigned long hints)
+{
+	struct gru_instruction *ins = (void *)cb;
+
+	ins->baddr0 = (long)mem_addr;
+	ins->nelem = nelem;
+	ins->tri0 = tri0;
+	ins->tri1_bufsize = tri1;
+	gru_start_instruction(ins, __opword(OP_IVLOAD, 0, xtype, IAA_RAM, 0,
+					CB_IMA(hints)));
+}
+
+static inline void gru_ivstore(void *cb, unsigned long mem_addr,
+		unsigned int tri0, unsigned int tri1,
+		unsigned char xtype, unsigned long nelem, unsigned long hints)
+{
+	struct gru_instruction *ins = (void *)cb;
+
+	ins->baddr0 = (long)mem_addr;
+	ins->nelem = nelem;
+	ins->tri0 = tri0;
+	ins->tri1_bufsize = tri1;
+	gru_start_instruction(ins, __opword(OP_IVSTORE, 0, xtype, IAA_RAM, 0,
+					CB_IMA(hints)));
+}
+
+static inline void gru_vset(void *cb, unsigned long mem_addr,
+		unsigned long value, unsigned char xtype, unsigned long nelem,
+		unsigned long stride, unsigned long hints)
+{
+	struct gru_instruction *ins = (void *)cb;
+
+	ins->baddr0 = (long)mem_addr;
+	ins->op2_value_baddr1 = value;
+	ins->nelem = nelem;
+	ins->op1_stride = stride;
+	gru_start_instruction(ins, __opword(OP_VSET, 0, xtype, IAA_RAM, 0,
+					 CB_IMA(hints)));
+}
+
+static inline void gru_ivset(void *cb, unsigned long mem_addr,
+		unsigned int tri1, unsigned long value, unsigned char xtype,
+		unsigned long nelem, unsigned long hints)
+{
+	struct gru_instruction *ins = (void *)cb;
+
+	ins->baddr0 = (long)mem_addr;
+	ins->op2_value_baddr1 = value;
+	ins->nelem = nelem;
+	ins->tri1_bufsize = tri1;
+	gru_start_instruction(ins, __opword(OP_IVSET, 0, xtype, IAA_RAM, 0,
+					CB_IMA(hints)));
+}
+
+static inline void gru_vflush(void *cb, unsigned long mem_addr,
+		unsigned long nelem, unsigned char xtype, unsigned long stride,
+		unsigned long hints)
+{
+	struct gru_instruction *ins = (void *)cb;
+
+	ins->baddr0 = (long)mem_addr;
+	ins->op1_stride = stride;
+	ins->nelem = nelem;
+	gru_start_instruction(ins, __opword(OP_VFLUSH, 0, xtype, IAA_RAM, 0,
+					CB_IMA(hints)));
+}
+
+static inline void gru_nop(void *cb, int hints)
+{
+	struct gru_instruction *ins = (void *)cb;
+
+	gru_start_instruction(ins, __opword(OP_NOP, 0, 0, 0, 0, CB_IMA(hints)));
+}
+
+
+static inline void gru_bcopy(void *cb, const unsigned long src,
+		unsigned long dest,
+		unsigned int tri0, unsigned int xtype, unsigned long nelem,
+		unsigned int bufsize, unsigned long hints)
+{
+	struct gru_instruction *ins = (void *)cb;
+
+	ins->baddr0 = (long)src;
+	ins->op2_value_baddr1 = (long)dest;
+	ins->nelem = nelem;
+	ins->tri0 = tri0;
+	ins->tri1_bufsize = bufsize;
+	gru_start_instruction(ins, __opword(OP_BCOPY, 0, xtype, IAA_RAM,
+					IAA_RAM, CB_IMA(hints)));
+}
+
+static inline void gru_bstore(void *cb, const unsigned long src,
+		unsigned long dest, unsigned int tri0, unsigned int xtype,
+		unsigned long nelem, unsigned long hints)
+{
+	struct gru_instruction *ins = (void *)cb;
+
+	ins->baddr0 = (long)src;
+	ins->op2_value_baddr1 = (long)dest;
+	ins->nelem = nelem;
+	ins->tri0 = tri0;
+	gru_start_instruction(ins, __opword(OP_BSTORE, 0, xtype, 0, IAA_RAM,
+					CB_IMA(hints)));
+}
+
+static inline void gru_gamir(void *cb, int exopc, unsigned long src,
+		unsigned int xtype, unsigned long hints)
+{
+	struct gru_instruction *ins = (void *)cb;
+
+	ins->baddr0 = (long)src;
+	gru_start_instruction(ins, __opword(OP_GAMIR, exopc, xtype, IAA_RAM, 0,
+					CB_IMA(hints)));
+}
+
+static inline void gru_gamirr(void *cb, int exopc, unsigned long src,
+		unsigned int xtype, unsigned long hints)
+{
+	struct gru_instruction *ins = (void *)cb;
+
+	ins->baddr0 = (long)src;
+	gru_start_instruction(ins, __opword(OP_GAMIRR, exopc, xtype, IAA_RAM, 0,
+					CB_IMA(hints)));
+}
+
+static inline void gru_gamer(void *cb, int exopc, unsigned long src,
+		unsigned int xtype,
+		unsigned long operand1, unsigned long operand2,
+		unsigned long hints)
+{
+	struct gru_instruction *ins = (void *)cb;
+
+	ins->baddr0 = (long)src;
+	ins->op1_stride = operand1;
+	ins->op2_value_baddr1 = operand2;
+	gru_start_instruction(ins, __opword(OP_GAMER, exopc, xtype, IAA_RAM, 0,
+					CB_IMA(hints)));
+}
+
+static inline void gru_gamerr(void *cb, int exopc, unsigned long src,
+		unsigned int xtype, unsigned long operand1,
+		unsigned long operand2, unsigned long hints)
+{
+	struct gru_instruction *ins = (void *)cb;
+
+	ins->baddr0 = (long)src;
+	ins->op1_stride = operand1;
+	ins->op2_value_baddr1 = operand2;
+	gru_start_instruction(ins, __opword(OP_GAMERR, exopc, xtype, IAA_RAM, 0,
+					CB_IMA(hints)));
+}
+
+static inline void gru_gamxr(void *cb, unsigned long src,
+		unsigned int tri0, unsigned long hints)
+{
+	struct gru_instruction *ins = (void *)cb;
+
+	ins->baddr0 = (long)src;
+	ins->nelem = 4;
+	gru_start_instruction(ins, __opword(OP_GAMXR, EOP_XR_CSWAP, XTYPE_DW,
+				 IAA_RAM, 0, CB_IMA(hints)));
+}
+
+static inline void gru_mesq(void *cb, unsigned long queue,
+		unsigned long tri0, unsigned long nelem,
+		unsigned long hints)
+{
+	struct gru_instruction *ins = (void *)cb;
+
+	ins->baddr0 = (long)queue;
+	ins->nelem = nelem;
+	ins->tri0 = tri0;
+	gru_start_instruction(ins, __opword(OP_MESQ, 0, XTYPE_CL, IAA_RAM, 0,
+					CB_IMA(hints)));
+}
+
+static inline unsigned long gru_get_amo_value(void *cb)
+{
+	struct gru_instruction *ins = (void *)cb;
+
+	return ins->avalue;
+}
+
+static inline int gru_get_amo_value_head(void *cb)
+{
+	struct gru_instruction *ins = (void *)cb;
+
+	return ins->avalue & 0xffffffff;
+}
+
+static inline int gru_get_amo_value_limit(void *cb)
+{
+	struct gru_instruction *ins = (void *)cb;
+
+	return ins->avalue >> 32;
+}
+
+static inline union gru_mesqhead  gru_mesq_head(int head, int limit)
+{
+	union gru_mesqhead mqh;
+
+	mqh.head = head;
+	mqh.limit = limit;
+	return mqh;
+}
+
+/*
+ * Get struct control_block_extended_exc_detail for CB.
+ */
+extern int gru_get_cb_exception_detail(void *cb,
+		       struct control_block_extended_exc_detail *excdet);
+
+#define GRU_EXC_STR_SIZE		256
+
+extern int gru_check_status_proc(void *cb);
+extern int gru_wait_proc(void *cb);
+extern void gru_wait_abort_proc(void *cb);
+
+/*
+ * Control block definition for checking status
+ */
+struct gru_control_block_status {
+	unsigned int	icmd		:1;
+	unsigned int	unused1		:31;
+	unsigned int	unused2		:24;
+	unsigned int	istatus		:2;
+	unsigned int	isubstatus	:4;
+	unsigned int	inused3		:2;
+};
+
+/* Get CB status */
+static inline int gru_get_cb_status(void *cb)
+{
+	struct gru_control_block_status *cbs = (void *)cb;
+
+	return cbs->istatus;
+}
+
+/* Get CB message queue substatus */
+static inline int gru_get_cb_message_queue_substatus(void *cb)
+{
+	struct gru_control_block_status *cbs = (void *)cb;
+
+	return cbs->isubstatus & CBSS_MSG_QUEUE_MASK;
+}
+
+/* Get CB substatus */
+static inline int gru_get_cb_substatus(void *cb)
+{
+	struct gru_control_block_status *cbs = (void *)cb;
+
+	return cbs->isubstatus;
+}
+
+/* Check the status of a CB. If the CB is in UPM mode, call the
+ * OS to handle the UPM status.
+ * Returns the CB status field value (0 for normal completion)
+ */
+static inline int gru_check_status(void *cb)
+{
+	struct gru_control_block_status *cbs = (void *)cb;
+	int ret = cbs->istatus;
+
+	if (ret == CBS_CALL_OS)
+		ret = gru_check_status_proc(cb);
+	return ret;
+}
+
+/* Wait for CB to complete.
+ * Returns the CB status field value (0 for normal completion)
+ */
+static inline int gru_wait(void *cb)
+{
+	struct gru_control_block_status *cbs = (void *)cb;
+	int ret = cbs->istatus;;
+
+	if (ret != CBS_IDLE)
+		ret = gru_wait_proc(cb);
+	return ret;
+}
+
+/* Wait for CB to complete. Aborts program if error. (Note: error does NOT
+ * mean TLB mis - only fatal errors such as memory parity error or user
+ * bugs will cause termination.
+ */
+static inline void gru_wait_abort(void *cb)
+{
+	struct gru_control_block_status *cbs = (void *)cb;
+
+	if (cbs->istatus != CBS_IDLE)
+		gru_wait_abort_proc(cb);
+}
+
+
+/*
+ * Get a pointer to a control block
+ * 	gseg	- GSeg address returned from gru_get_thread_gru_segment()
+ * 	index	- index of desired CB
+ */
+static inline void *gru_get_cb_pointer(void *gseg,
+						      int index)
+{
+	return gseg + GRU_CB_BASE + index * GRU_HANDLE_STRIDE;
+}
+
+/*
+ * Get a pointer to a cacheline in the data segment portion of a GSeg
+ * 	gseg	- GSeg address returned from gru_get_thread_gru_segment()
+ * 	index	- index of desired cache line
+ */
+static inline void *gru_get_data_pointer(void *gseg, int index)
+{
+	return gseg + GRU_DS_BASE + index * GRU_CACHE_LINE_BYTES;
+}
+
+/*
+ * Convert a vaddr into the tri index within the GSEG
+ * 	vaddr		- virtual address of within gseg
+ */
+static inline int gru_get_tri(void *vaddr)
+{
+	return ((unsigned long)vaddr & (GRU_GSEG_PAGESIZE - 1)) - GRU_DS_BASE;
+}
+#endif		/* __GRU_INSTRUCTIONS_H__ */
diff --git a/drivers/misc/sgi-gru/grufault.c b/drivers/misc/sgi-gru/grufault.c
new file mode 100644
index 000000000000..3d33015bbf31
--- /dev/null
+++ b/drivers/misc/sgi-gru/grufault.c
@@ -0,0 +1,633 @@
+/*
+ * SN Platform GRU Driver
+ *
+ *              FAULT HANDLER FOR GRU DETECTED TLB MISSES
+ *
+ * This file contains code that handles TLB misses within the GRU.
+ * These misses are reported either via interrupts or user polling of
+ * the user CB.
+ *
+ *  Copyright (c) 2008 Silicon Graphics, Inc.  All Rights Reserved.
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/spinlock.h>
+#include <linux/mm.h>
+#include <linux/hugetlb.h>
+#include <linux/device.h>
+#include <linux/io.h>
+#include <linux/uaccess.h>
+#include <asm/pgtable.h>
+#include "gru.h"
+#include "grutables.h"
+#include "grulib.h"
+#include "gru_instructions.h"
+#include <asm/uv/uv_hub.h>
+
+/*
+ * Test if a physical address is a valid GRU GSEG address
+ */
+static inline int is_gru_paddr(unsigned long paddr)
+{
+	return paddr >= gru_start_paddr && paddr < gru_end_paddr;
+}
+
+/*
+ * Find the vma of a GRU segment. Caller must hold mmap_sem.
+ */
+struct vm_area_struct *gru_find_vma(unsigned long vaddr)
+{
+	struct vm_area_struct *vma;
+
+	vma = find_vma(current->mm, vaddr);
+	if (vma && vma->vm_start <= vaddr && vma->vm_ops == &gru_vm_ops)
+		return vma;
+	return NULL;
+}
+
+/*
+ * Find and lock the gts that contains the specified user vaddr.
+ *
+ * Returns:
+ * 	- *gts with the mmap_sem locked for read and the GTS locked.
+ *	- NULL if vaddr invalid OR is not a valid GSEG vaddr.
+ */
+
+static struct gru_thread_state *gru_find_lock_gts(unsigned long vaddr)
+{
+	struct mm_struct *mm = current->mm;
+	struct vm_area_struct *vma;
+	struct gru_thread_state *gts = NULL;
+
+	down_read(&mm->mmap_sem);
+	vma = gru_find_vma(vaddr);
+	if (vma)
+		gts = gru_find_thread_state(vma, TSID(vaddr, vma));
+	if (gts)
+		mutex_lock(&gts->ts_ctxlock);
+	else
+		up_read(&mm->mmap_sem);
+	return gts;
+}
+
+static struct gru_thread_state *gru_alloc_locked_gts(unsigned long vaddr)
+{
+	struct mm_struct *mm = current->mm;
+	struct vm_area_struct *vma;
+	struct gru_thread_state *gts = NULL;
+
+	down_write(&mm->mmap_sem);
+	vma = gru_find_vma(vaddr);
+	if (vma)
+		gts = gru_alloc_thread_state(vma, TSID(vaddr, vma));
+	if (gts) {
+		mutex_lock(&gts->ts_ctxlock);
+		downgrade_write(&mm->mmap_sem);
+	} else {
+		up_write(&mm->mmap_sem);
+	}
+
+	return gts;
+}
+
+/*
+ * Unlock a GTS that was previously locked with gru_find_lock_gts().
+ */
+static void gru_unlock_gts(struct gru_thread_state *gts)
+{
+	mutex_unlock(&gts->ts_ctxlock);
+	up_read(&current->mm->mmap_sem);
+}
+
+/*
+ * Set a CB.istatus to active using a user virtual address. This must be done
+ * just prior to a TFH RESTART. The new cb.istatus is an in-cache status ONLY.
+ * If the line is evicted, the status may be lost. The in-cache update
+ * is necessary to prevent the user from seeing a stale cb.istatus that will
+ * change as soon as the TFH restart is complete. Races may cause an
+ * occasional failure to clear the cb.istatus, but that is ok.
+ *
+ * If the cb address is not valid (should not happen, but...), nothing
+ * bad will happen.. The get_user()/put_user() will fail but there
+ * are no bad side-effects.
+ */
+static void gru_cb_set_istatus_active(unsigned long __user *cb)
+{
+	union {
+		struct gru_instruction_bits bits;
+		unsigned long dw;
+	} u;
+
+	if (cb) {
+		get_user(u.dw, cb);
+		u.bits.istatus = CBS_ACTIVE;
+		put_user(u.dw, cb);
+	}
+}
+
+/*
+ * Convert a interrupt IRQ to a pointer to the GRU GTS that caused the
+ * interrupt. Interrupts are always sent to a cpu on the blade that contains the
+ * GRU (except for headless blades which are not currently supported). A blade
+ * has N grus; a block of N consecutive IRQs is assigned to the GRUs. The IRQ
+ * number uniquely identifies the GRU chiplet on the local blade that caused the
+ * interrupt. Always called in interrupt context.
+ */
+static inline struct gru_state *irq_to_gru(int irq)
+{
+	return &gru_base[uv_numa_blade_id()]->bs_grus[irq - IRQ_GRU];
+}
+
+/*
+ * Read & clear a TFM
+ *
+ * The GRU has an array of fault maps. A map is private to a cpu
+ * Only one cpu will be accessing a cpu's fault map.
+ *
+ * This function scans the cpu-private fault map & clears all bits that
+ * are set. The function returns a bitmap that indicates the bits that
+ * were cleared. Note that sense the maps may be updated asynchronously by
+ * the GRU, atomic operations must be used to clear bits.
+ */
+static void get_clear_fault_map(struct gru_state *gru,
+				struct gru_tlb_fault_map *map)
+{
+	unsigned long i, k;
+	struct gru_tlb_fault_map *tfm;
+
+	tfm = get_tfm_for_cpu(gru, gru_cpu_fault_map_id());
+	prefetchw(tfm);		/* Helps on hardware, required for emulator */
+	for (i = 0; i < BITS_TO_LONGS(GRU_NUM_CBE); i++) {
+		k = tfm->fault_bits[i];
+		if (k)
+			k = xchg(&tfm->fault_bits[i], 0UL);
+		map->fault_bits[i] = k;
+	}
+
+	/*
+	 * Not functionally required but helps performance. (Required
+	 * on emulator)
+	 */
+	gru_flush_cache(tfm);
+}
+
+/*
+ * Atomic (interrupt context) & non-atomic (user context) functions to
+ * convert a vaddr into a physical address. The size of the page
+ * is returned in pageshift.
+ * 	returns:
+ * 		  0 - successful
+ * 		< 0 - error code
+ * 		  1 - (atomic only) try again in non-atomic context
+ */
+static int non_atomic_pte_lookup(struct vm_area_struct *vma,
+				 unsigned long vaddr, int write,
+				 unsigned long *paddr, int *pageshift)
+{
+	struct page *page;
+
+	/* ZZZ Need to handle HUGE pages */
+	if (is_vm_hugetlb_page(vma))
+		return -EFAULT;
+	*pageshift = PAGE_SHIFT;
+	if (get_user_pages
+	    (current, current->mm, vaddr, 1, write, 0, &page, NULL) <= 0)
+		return -EFAULT;
+	*paddr = page_to_phys(page);
+	put_page(page);
+	return 0;
+}
+
+/*
+ *
+ * atomic_pte_lookup
+ *
+ * Convert a user virtual address to a physical address
+ * Only supports Intel large pages (2MB only) on x86_64.
+ *	ZZZ - hugepage support is incomplete
+ */
+static int atomic_pte_lookup(struct vm_area_struct *vma, unsigned long vaddr,
+	int write, unsigned long *paddr, int *pageshift)
+{
+	pgd_t *pgdp;
+	pmd_t *pmdp;
+	pud_t *pudp;
+	pte_t pte;
+
+	WARN_ON(irqs_disabled());		/* ZZZ debug */
+
+	local_irq_disable();
+	pgdp = pgd_offset(vma->vm_mm, vaddr);
+	if (unlikely(pgd_none(*pgdp)))
+		goto err;
+
+	pudp = pud_offset(pgdp, vaddr);
+	if (unlikely(pud_none(*pudp)))
+		goto err;
+
+	pmdp = pmd_offset(pudp, vaddr);
+	if (unlikely(pmd_none(*pmdp)))
+		goto err;
+#ifdef CONFIG_X86_64
+	if (unlikely(pmd_large(*pmdp)))
+		pte = *(pte_t *) pmdp;
+	else
+#endif
+		pte = *pte_offset_kernel(pmdp, vaddr);
+
+	local_irq_enable();
+
+	if (unlikely(!pte_present(pte) ||
+		     (write && (!pte_write(pte) || !pte_dirty(pte)))))
+		return 1;
+
+	*paddr = pte_pfn(pte) << PAGE_SHIFT;
+	*pageshift = is_vm_hugetlb_page(vma) ? HPAGE_SHIFT : PAGE_SHIFT;
+	return 0;
+
+err:
+	local_irq_enable();
+	return 1;
+}
+
+/*
+ * Drop a TLB entry into the GRU. The fault is described by info in an TFH.
+ *	Input:
+ *		cb    Address of user CBR. Null if not running in user context
+ * 	Return:
+ * 		  0 = dropin, exception, or switch to UPM successful
+ * 		  1 = range invalidate active
+ * 		< 0 = error code
+ *
+ */
+static int gru_try_dropin(struct gru_thread_state *gts,
+			  struct gru_tlb_fault_handle *tfh,
+			  unsigned long __user *cb)
+{
+	struct mm_struct *mm = gts->ts_mm;
+	struct vm_area_struct *vma;
+	int pageshift, asid, write, ret;
+	unsigned long paddr, gpa, vaddr;
+
+	/*
+	 * NOTE: The GRU contains magic hardware that eliminates races between
+	 * TLB invalidates and TLB dropins. If an invalidate occurs
+	 * in the window between reading the TFH and the subsequent TLB dropin,
+	 * the dropin is ignored. This eliminates the need for additional locks.
+	 */
+
+	/*
+	 * Error if TFH state is IDLE or FMM mode & the user issuing a UPM call.
+	 * Might be a hardware race OR a stupid user. Ignore FMM because FMM
+	 * is a transient state.
+	 */
+	if (tfh->state == TFHSTATE_IDLE)
+		goto failidle;
+	if (tfh->state == TFHSTATE_MISS_FMM && cb)
+		goto failfmm;
+
+	write = (tfh->cause & TFHCAUSE_TLB_MOD) != 0;
+	vaddr = tfh->missvaddr;
+	asid = tfh->missasid;
+	if (asid == 0)
+		goto failnoasid;
+
+	rmb();	/* TFH must be cache resident before reading ms_range_active */
+
+	/*
+	 * TFH is cache resident - at least briefly. Fail the dropin
+	 * if a range invalidate is active.
+	 */
+	if (atomic_read(&gts->ts_gms->ms_range_active))
+		goto failactive;
+
+	vma = find_vma(mm, vaddr);
+	if (!vma)
+		goto failinval;
+
+	/*
+	 * Atomic lookup is faster & usually works even if called in non-atomic
+	 * context.
+	 */
+	ret = atomic_pte_lookup(vma, vaddr, write, &paddr, &pageshift);
+	if (ret) {
+		if (!cb)
+			goto failupm;
+		if (non_atomic_pte_lookup(vma, vaddr, write, &paddr,
+					  &pageshift))
+			goto failinval;
+	}
+	if (is_gru_paddr(paddr))
+		goto failinval;
+
+	paddr = paddr & ~((1UL << pageshift) - 1);
+	gpa = uv_soc_phys_ram_to_gpa(paddr);
+	gru_cb_set_istatus_active(cb);
+	tfh_write_restart(tfh, gpa, GAA_RAM, vaddr, asid, write,
+			  GRU_PAGESIZE(pageshift));
+	STAT(tlb_dropin);
+	gru_dbg(grudev,
+		"%s: tfh 0x%p, vaddr 0x%lx, asid 0x%x, ps %d, gpa 0x%lx\n",
+		ret ? "non-atomic" : "atomic", tfh, vaddr, asid,
+		pageshift, gpa);
+	return 0;
+
+failnoasid:
+	/* No asid (delayed unload). */
+	STAT(tlb_dropin_fail_no_asid);
+	gru_dbg(grudev, "FAILED no_asid tfh: 0x%p, vaddr 0x%lx\n", tfh, vaddr);
+	if (!cb)
+		tfh_user_polling_mode(tfh);
+	else
+		gru_flush_cache(tfh);
+	return -EAGAIN;
+
+failupm:
+	/* Atomic failure switch CBR to UPM */
+	tfh_user_polling_mode(tfh);
+	STAT(tlb_dropin_fail_upm);
+	gru_dbg(grudev, "FAILED upm tfh: 0x%p, vaddr 0x%lx\n", tfh, vaddr);
+	return 1;
+
+failfmm:
+	/* FMM state on UPM call */
+	STAT(tlb_dropin_fail_fmm);
+	gru_dbg(grudev, "FAILED fmm tfh: 0x%p, state %d\n", tfh, tfh->state);
+	return 0;
+
+failidle:
+	/* TFH was idle  - no miss pending */
+	gru_flush_cache(tfh);
+	if (cb)
+		gru_flush_cache(cb);
+	STAT(tlb_dropin_fail_idle);
+	gru_dbg(grudev, "FAILED idle tfh: 0x%p, state %d\n", tfh, tfh->state);
+	return 0;
+
+failinval:
+	/* All errors (atomic & non-atomic) switch CBR to EXCEPTION state */
+	tfh_exception(tfh);
+	STAT(tlb_dropin_fail_invalid);
+	gru_dbg(grudev, "FAILED inval tfh: 0x%p, vaddr 0x%lx\n", tfh, vaddr);
+	return -EFAULT;
+
+failactive:
+	/* Range invalidate active. Switch to UPM iff atomic */
+	if (!cb)
+		tfh_user_polling_mode(tfh);
+	else
+		gru_flush_cache(tfh);
+	STAT(tlb_dropin_fail_range_active);
+	gru_dbg(grudev, "FAILED range active: tfh 0x%p, vaddr 0x%lx\n",
+		tfh, vaddr);
+	return 1;
+}
+
+/*
+ * Process an external interrupt from the GRU. This interrupt is
+ * caused by a TLB miss.
+ * Note that this is the interrupt handler that is registered with linux
+ * interrupt handlers.
+ */
+irqreturn_t gru_intr(int irq, void *dev_id)
+{
+	struct gru_state *gru;
+	struct gru_tlb_fault_map map;
+	struct gru_thread_state *gts;
+	struct gru_tlb_fault_handle *tfh = NULL;
+	int cbrnum, ctxnum;
+
+	STAT(intr);
+
+	gru = irq_to_gru(irq);
+	if (!gru) {
+		dev_err(grudev, "GRU: invalid interrupt: cpu %d, irq %d\n",
+			raw_smp_processor_id(), irq);
+		return IRQ_NONE;
+	}
+	get_clear_fault_map(gru, &map);
+	gru_dbg(grudev, "irq %d, gru %x, map 0x%lx\n", irq, gru->gs_gid,
+		map.fault_bits[0]);
+
+	for_each_cbr_in_tfm(cbrnum, map.fault_bits) {
+		tfh = get_tfh_by_index(gru, cbrnum);
+		prefetchw(tfh);	/* Helps on hdw, required for emulator */
+
+		/*
+		 * When hardware sets a bit in the faultmap, it implicitly
+		 * locks the GRU context so that it cannot be unloaded.
+		 * The gts cannot change until a TFH start/writestart command
+		 * is issued.
+		 */
+		ctxnum = tfh->ctxnum;
+		gts = gru->gs_gts[ctxnum];
+
+		/*
+		 * This is running in interrupt context. Trylock the mmap_sem.
+		 * If it fails, retry the fault in user context.
+		 */
+		if (down_read_trylock(&gts->ts_mm->mmap_sem)) {
+			gru_try_dropin(gts, tfh, NULL);
+			up_read(&gts->ts_mm->mmap_sem);
+		} else {
+			tfh_user_polling_mode(tfh);
+		}
+	}
+	return IRQ_HANDLED;
+}
+
+
+static int gru_user_dropin(struct gru_thread_state *gts,
+			   struct gru_tlb_fault_handle *tfh,
+			   unsigned long __user *cb)
+{
+	struct gru_mm_struct *gms = gts->ts_gms;
+	int ret;
+
+	while (1) {
+		wait_event(gms->ms_wait_queue,
+			   atomic_read(&gms->ms_range_active) == 0);
+		prefetchw(tfh);	/* Helps on hdw, required for emulator */
+		ret = gru_try_dropin(gts, tfh, cb);
+		if (ret <= 0)
+			return ret;
+		STAT(call_os_wait_queue);
+	}
+}
+
+/*
+ * This interface is called as a result of a user detecting a "call OS" bit
+ * in a user CB. Normally means that a TLB fault has occurred.
+ * 	cb - user virtual address of the CB
+ */
+int gru_handle_user_call_os(unsigned long cb)
+{
+	struct gru_tlb_fault_handle *tfh;
+	struct gru_thread_state *gts;
+	unsigned long __user *cbp;
+	int ucbnum, cbrnum, ret = -EINVAL;
+
+	STAT(call_os);
+	gru_dbg(grudev, "address 0x%lx\n", cb);
+
+	/* sanity check the cb pointer */
+	ucbnum = get_cb_number((void *)cb);
+	if ((cb & (GRU_HANDLE_STRIDE - 1)) || ucbnum >= GRU_NUM_CB)
+		return -EINVAL;
+	cbp = (unsigned long *)cb;
+
+	gts = gru_find_lock_gts(cb);
+	if (!gts)
+		return -EINVAL;
+
+	if (ucbnum >= gts->ts_cbr_au_count * GRU_CBR_AU_SIZE) {
+		ret = -EINVAL;
+		goto exit;
+	}
+
+	/*
+	 * If force_unload is set, the UPM TLB fault is phony. The task
+	 * has migrated to another node and the GSEG must be moved. Just
+	 * unload the context. The task will page fault and assign a new
+	 * context.
+	 */
+	ret = -EAGAIN;
+	cbrnum = thread_cbr_number(gts, ucbnum);
+	if (gts->ts_force_unload) {
+		gru_unload_context(gts, 1);
+	} else if (gts->ts_gru) {
+		tfh = get_tfh_by_index(gts->ts_gru, cbrnum);
+		ret = gru_user_dropin(gts, tfh, cbp);
+	}
+exit:
+	gru_unlock_gts(gts);
+	return ret;
+}
+
+/*
+ * Fetch the exception detail information for a CB that terminated with
+ * an exception.
+ */
+int gru_get_exception_detail(unsigned long arg)
+{
+	struct control_block_extended_exc_detail excdet;
+	struct gru_control_block_extended *cbe;
+	struct gru_thread_state *gts;
+	int ucbnum, cbrnum, ret;
+
+	STAT(user_exception);
+	if (copy_from_user(&excdet, (void __user *)arg, sizeof(excdet)))
+		return -EFAULT;
+
+	gru_dbg(grudev, "address 0x%lx\n", excdet.cb);
+	gts = gru_find_lock_gts(excdet.cb);
+	if (!gts)
+		return -EINVAL;
+
+	if (gts->ts_gru) {
+		ucbnum = get_cb_number((void *)excdet.cb);
+		cbrnum = thread_cbr_number(gts, ucbnum);
+		cbe = get_cbe_by_index(gts->ts_gru, cbrnum);
+		excdet.opc = cbe->opccpy;
+		excdet.exopc = cbe->exopccpy;
+		excdet.ecause = cbe->ecause;
+		excdet.exceptdet0 = cbe->idef1upd;
+		excdet.exceptdet1 = cbe->idef3upd;
+		ret = 0;
+	} else {
+		ret = -EAGAIN;
+	}
+	gru_unlock_gts(gts);
+
+	gru_dbg(grudev, "address 0x%lx, ecause 0x%x\n", excdet.cb,
+		excdet.ecause);
+	if (!ret && copy_to_user((void __user *)arg, &excdet, sizeof(excdet)))
+		ret = -EFAULT;
+	return ret;
+}
+
+/*
+ * User request to unload a context. Content is saved for possible reload.
+ */
+int gru_user_unload_context(unsigned long arg)
+{
+	struct gru_thread_state *gts;
+	struct gru_unload_context_req req;
+
+	STAT(user_unload_context);
+	if (copy_from_user(&req, (void __user *)arg, sizeof(req)))
+		return -EFAULT;
+
+	gru_dbg(grudev, "gseg 0x%lx\n", req.gseg);
+
+	gts = gru_find_lock_gts(req.gseg);
+	if (!gts)
+		return -EINVAL;
+
+	if (gts->ts_gru)
+		gru_unload_context(gts, 1);
+	gru_unlock_gts(gts);
+
+	return 0;
+}
+
+/*
+ * User request to flush a range of virtual addresses from the GRU TLB
+ * (Mainly for testing).
+ */
+int gru_user_flush_tlb(unsigned long arg)
+{
+	struct gru_thread_state *gts;
+	struct gru_flush_tlb_req req;
+
+	STAT(user_flush_tlb);
+	if (copy_from_user(&req, (void __user *)arg, sizeof(req)))
+		return -EFAULT;
+
+	gru_dbg(grudev, "gseg 0x%lx, vaddr 0x%lx, len 0x%lx\n", req.gseg,
+		req.vaddr, req.len);
+
+	gts = gru_find_lock_gts(req.gseg);
+	if (!gts)
+		return -EINVAL;
+
+	gru_flush_tlb_range(gts->ts_gms, req.vaddr, req.vaddr + req.len);
+	gru_unlock_gts(gts);
+
+	return 0;
+}
+
+/*
+ * Register the current task as the user of the GSEG slice.
+ * Needed for TLB fault interrupt targeting.
+ */
+int gru_set_task_slice(long address)
+{
+	struct gru_thread_state *gts;
+
+	STAT(set_task_slice);
+	gru_dbg(grudev, "address 0x%lx\n", address);
+	gts = gru_alloc_locked_gts(address);
+	if (!gts)
+		return -EINVAL;
+
+	gts->ts_tgid_owner = current->tgid;
+	gru_unlock_gts(gts);
+
+	return 0;
+}
diff --git a/drivers/misc/sgi-gru/grufile.c b/drivers/misc/sgi-gru/grufile.c
new file mode 100644
index 000000000000..23c91f5f6b61
--- /dev/null
+++ b/drivers/misc/sgi-gru/grufile.c
@@ -0,0 +1,485 @@
+/*
+ * SN Platform GRU Driver
+ *
+ *              FILE OPERATIONS & DRIVER INITIALIZATION
+ *
+ * This file supports the user system call for file open, close, mmap, etc.
+ * This also incudes the driver initialization code.
+ *
+ *  Copyright (c) 2008 Silicon Graphics, Inc.  All Rights Reserved.
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/slab.h>
+#include <linux/mm.h>
+#include <linux/io.h>
+#include <linux/smp_lock.h>
+#include <linux/spinlock.h>
+#include <linux/device.h>
+#include <linux/miscdevice.h>
+#include <linux/interrupt.h>
+#include <linux/proc_fs.h>
+#include <linux/uaccess.h>
+#include "gru.h"
+#include "grulib.h"
+#include "grutables.h"
+
+#if defined CONFIG_X86_64
+#include <asm/genapic.h>
+#include <asm/irq.h>
+#define IS_UV()		is_uv_system()
+#elif defined CONFIG_IA64
+#include <asm/system.h>
+#include <asm/sn/simulator.h>
+/* temp support for running on hardware simulator */
+#define IS_UV()		IS_MEDUSA() || ia64_platform_is("uv")
+#else
+#define IS_UV()		0
+#endif
+
+#include <asm/uv/uv_hub.h>
+#include <asm/uv/uv_mmrs.h>
+
+struct gru_blade_state *gru_base[GRU_MAX_BLADES] __read_mostly;
+unsigned long gru_start_paddr, gru_end_paddr __read_mostly;
+struct gru_stats_s gru_stats;
+
+/* Guaranteed user available resources on each node */
+static int max_user_cbrs, max_user_dsr_bytes;
+
+static struct file_operations gru_fops;
+static struct miscdevice gru_miscdev;
+
+
+/*
+ * gru_vma_close
+ *
+ * Called when unmapping a device mapping. Frees all gru resources
+ * and tables belonging to the vma.
+ */
+static void gru_vma_close(struct vm_area_struct *vma)
+{
+	struct gru_vma_data *vdata;
+	struct gru_thread_state *gts;
+	struct list_head *entry, *next;
+
+	if (!vma->vm_private_data)
+		return;
+
+	vdata = vma->vm_private_data;
+	vma->vm_private_data = NULL;
+	gru_dbg(grudev, "vma %p, file %p, vdata %p\n", vma, vma->vm_file,
+				vdata);
+	list_for_each_safe(entry, next, &vdata->vd_head) {
+		gts =
+		    list_entry(entry, struct gru_thread_state, ts_next);
+		list_del(&gts->ts_next);
+		mutex_lock(&gts->ts_ctxlock);
+		if (gts->ts_gru)
+			gru_unload_context(gts, 0);
+		mutex_unlock(&gts->ts_ctxlock);
+		gts_drop(gts);
+	}
+	kfree(vdata);
+	STAT(vdata_free);
+}
+
+/*
+ * gru_file_mmap
+ *
+ * Called when mmaping the device.  Initializes the vma with a fault handler
+ * and private data structure necessary to allocate, track, and free the
+ * underlying pages.
+ */
+static int gru_file_mmap(struct file *file, struct vm_area_struct *vma)
+{
+	if ((vma->vm_flags & (VM_SHARED | VM_WRITE)) != (VM_SHARED | VM_WRITE))
+		return -EPERM;
+
+	if (vma->vm_start & (GRU_GSEG_PAGESIZE - 1) ||
+			vma->vm_end & (GRU_GSEG_PAGESIZE - 1))
+		return -EINVAL;
+
+	vma->vm_flags |=
+	    (VM_IO | VM_DONTCOPY | VM_LOCKED | VM_DONTEXPAND | VM_PFNMAP |
+			VM_RESERVED);
+	vma->vm_page_prot = PAGE_SHARED;
+	vma->vm_ops = &gru_vm_ops;
+
+	vma->vm_private_data = gru_alloc_vma_data(vma, 0);
+	if (!vma->vm_private_data)
+		return -ENOMEM;
+
+	gru_dbg(grudev, "file %p, vaddr 0x%lx, vma %p, vdata %p\n",
+		file, vma->vm_start, vma, vma->vm_private_data);
+	return 0;
+}
+
+/*
+ * Create a new GRU context
+ */
+static int gru_create_new_context(unsigned long arg)
+{
+	struct gru_create_context_req req;
+	struct vm_area_struct *vma;
+	struct gru_vma_data *vdata;
+	int ret = -EINVAL;
+
+
+	if (copy_from_user(&req, (void __user *)arg, sizeof(req)))
+		return -EFAULT;
+
+	if (req.data_segment_bytes == 0 ||
+				req.data_segment_bytes > max_user_dsr_bytes)
+		return -EINVAL;
+	if (!req.control_blocks || !req.maximum_thread_count ||
+				req.control_blocks > max_user_cbrs)
+		return -EINVAL;
+
+	if (!(req.options & GRU_OPT_MISS_MASK))
+		req.options |= GRU_OPT_MISS_FMM_INTR;
+
+	down_write(&current->mm->mmap_sem);
+	vma = gru_find_vma(req.gseg);
+	if (vma) {
+		vdata = vma->vm_private_data;
+		vdata->vd_user_options = req.options;
+		vdata->vd_dsr_au_count =
+		    GRU_DS_BYTES_TO_AU(req.data_segment_bytes);
+		vdata->vd_cbr_au_count = GRU_CB_COUNT_TO_AU(req.control_blocks);
+		ret = 0;
+	}
+	up_write(&current->mm->mmap_sem);
+
+	return ret;
+}
+
+/*
+ * Get GRU configuration info (temp - for emulator testing)
+ */
+static long gru_get_config_info(unsigned long arg)
+{
+	struct gru_config_info info;
+	int nodesperblade;
+
+	if (num_online_nodes() > 1 &&
+			(uv_node_to_blade_id(1) == uv_node_to_blade_id(0)))
+		nodesperblade = 2;
+	else
+		nodesperblade = 1;
+	info.cpus = num_online_cpus();
+	info.nodes = num_online_nodes();
+	info.blades = info.nodes / nodesperblade;
+	info.chiplets = GRU_CHIPLETS_PER_BLADE * info.blades;
+
+	if (copy_to_user((void __user *)arg, &info, sizeof(info)))
+		return -EFAULT;
+	return 0;
+}
+
+/*
+ * Get GRU chiplet status
+ */
+static long gru_get_chiplet_status(unsigned long arg)
+{
+	struct gru_state *gru;
+	struct gru_chiplet_info info;
+
+	if (copy_from_user(&info, (void __user *)arg, sizeof(info)))
+		return -EFAULT;
+
+	if (info.node == -1)
+		info.node = numa_node_id();
+	if (info.node >= num_possible_nodes() ||
+			info.chiplet >= GRU_CHIPLETS_PER_HUB ||
+			info.node < 0 || info.chiplet < 0)
+		return -EINVAL;
+
+	info.blade = uv_node_to_blade_id(info.node);
+	gru = get_gru(info.blade, info.chiplet);
+
+	info.total_dsr_bytes = GRU_NUM_DSR_BYTES;
+	info.total_cbr = GRU_NUM_CB;
+	info.total_user_dsr_bytes = GRU_NUM_DSR_BYTES -
+		gru->gs_reserved_dsr_bytes;
+	info.total_user_cbr = GRU_NUM_CB - gru->gs_reserved_cbrs;
+	info.free_user_dsr_bytes = hweight64(gru->gs_dsr_map) *
+			GRU_DSR_AU_BYTES;
+	info.free_user_cbr = hweight64(gru->gs_cbr_map) * GRU_CBR_AU_SIZE;
+
+	if (copy_to_user((void __user *)arg, &info, sizeof(info)))
+		return -EFAULT;
+	return 0;
+}
+
+/*
+ * gru_file_unlocked_ioctl
+ *
+ * Called to update file attributes via IOCTL calls.
+ */
+static long gru_file_unlocked_ioctl(struct file *file, unsigned int req,
+				    unsigned long arg)
+{
+	int err = -EBADRQC;
+
+	gru_dbg(grudev, "file %p\n", file);
+
+	switch (req) {
+	case GRU_CREATE_CONTEXT:
+		err = gru_create_new_context(arg);
+		break;
+	case GRU_SET_TASK_SLICE:
+		err = gru_set_task_slice(arg);
+		break;
+	case GRU_USER_GET_EXCEPTION_DETAIL:
+		err = gru_get_exception_detail(arg);
+		break;
+	case GRU_USER_UNLOAD_CONTEXT:
+		err = gru_user_unload_context(arg);
+		break;
+	case GRU_GET_CHIPLET_STATUS:
+		err = gru_get_chiplet_status(arg);
+		break;
+	case GRU_USER_FLUSH_TLB:
+		err = gru_user_flush_tlb(arg);
+		break;
+	case GRU_USER_CALL_OS:
+		err = gru_handle_user_call_os(arg);
+		break;
+	case GRU_GET_CONFIG_INFO:
+		err = gru_get_config_info(arg);
+		break;
+	}
+	return err;
+}
+
+/*
+ * Called at init time to build tables for all GRUs that are present in the
+ * system.
+ */
+static void gru_init_chiplet(struct gru_state *gru, unsigned long paddr,
+			     void *vaddr, int nid, int bid, int grunum)
+{
+	spin_lock_init(&gru->gs_lock);
+	spin_lock_init(&gru->gs_asid_lock);
+	gru->gs_gru_base_paddr = paddr;
+	gru->gs_gru_base_vaddr = vaddr;
+	gru->gs_gid = bid * GRU_CHIPLETS_PER_BLADE + grunum;
+	gru->gs_blade = gru_base[bid];
+	gru->gs_blade_id = bid;
+	gru->gs_cbr_map = (GRU_CBR_AU == 64) ? ~0 : (1UL << GRU_CBR_AU) - 1;
+	gru->gs_dsr_map = (1UL << GRU_DSR_AU) - 1;
+	gru_tgh_flush_init(gru);
+	gru_dbg(grudev, "bid %d, nid %d, gru %x, vaddr %p (0x%lx)\n",
+		bid, nid, gru->gs_gid, gru->gs_gru_base_vaddr,
+		gru->gs_gru_base_paddr);
+	gru_kservices_init(gru);
+}
+
+static int gru_init_tables(unsigned long gru_base_paddr, void *gru_base_vaddr)
+{
+	int pnode, nid, bid, chip;
+	int cbrs, dsrbytes, n;
+	int order = get_order(sizeof(struct gru_blade_state));
+	struct page *page;
+	struct gru_state *gru;
+	unsigned long paddr;
+	void *vaddr;
+
+	max_user_cbrs = GRU_NUM_CB;
+	max_user_dsr_bytes = GRU_NUM_DSR_BYTES;
+	for_each_online_node(nid) {
+		bid = uv_node_to_blade_id(nid);
+		pnode = uv_node_to_pnode(nid);
+		if (gru_base[bid])
+			continue;
+		page = alloc_pages_node(nid, GFP_KERNEL, order);
+		if (!page)
+			goto fail;
+		gru_base[bid] = page_address(page);
+		memset(gru_base[bid], 0, sizeof(struct gru_blade_state));
+		gru_base[bid]->bs_lru_gru = &gru_base[bid]->bs_grus[0];
+		spin_lock_init(&gru_base[bid]->bs_lock);
+
+		dsrbytes = 0;
+		cbrs = 0;
+		for (gru = gru_base[bid]->bs_grus, chip = 0;
+		     		chip < GRU_CHIPLETS_PER_BLADE;
+				chip++, gru++) {
+			paddr = gru_chiplet_paddr(gru_base_paddr, pnode, chip);
+			vaddr = gru_chiplet_vaddr(gru_base_vaddr, pnode, chip);
+			gru_init_chiplet(gru, paddr, vaddr, bid, nid, chip);
+			n = hweight64(gru->gs_cbr_map) * GRU_CBR_AU_SIZE;
+			cbrs = max(cbrs, n);
+			n = hweight64(gru->gs_dsr_map) * GRU_DSR_AU_BYTES;
+			dsrbytes = max(dsrbytes, n);
+		}
+		max_user_cbrs = min(max_user_cbrs, cbrs);
+		max_user_dsr_bytes = min(max_user_dsr_bytes, dsrbytes);
+	}
+
+	return 0;
+
+fail:
+	for (nid--; nid >= 0; nid--)
+		free_pages((unsigned long)gru_base[nid], order);
+	return -ENOMEM;
+}
+
+#ifdef CONFIG_IA64
+
+static int get_base_irq(void)
+{
+	return IRQ_GRU;
+}
+
+#elif defined CONFIG_X86_64
+
+static void noop(unsigned int irq)
+{
+}
+
+static struct irq_chip gru_chip = {
+	.name		= "gru",
+	.mask		= noop,
+	.unmask		= noop,
+	.ack		= noop,
+};
+
+static int get_base_irq(void)
+{
+	set_irq_chip(IRQ_GRU, &gru_chip);
+	set_irq_chip(IRQ_GRU + 1, &gru_chip);
+	return IRQ_GRU;
+}
+#endif
+
+/*
+ * gru_init
+ *
+ * Called at boot or module load time to initialize the GRUs.
+ */
+static int __init gru_init(void)
+{
+	int ret, irq, chip;
+	char id[10];
+	void *gru_start_vaddr;
+
+	if (!IS_UV())
+		return 0;
+
+#if defined CONFIG_IA64
+	gru_start_paddr = 0xd000000000UL; /* ZZZZZZZZZZZZZZZZZZZ fixme */
+#else
+	gru_start_paddr = uv_read_local_mmr(UVH_RH_GAM_GRU_OVERLAY_CONFIG_MMR) &
+				0x7fffffffffffUL;
+
+#endif
+	gru_start_vaddr = __va(gru_start_paddr);
+	gru_end_paddr = gru_start_paddr + MAX_NUMNODES * GRU_SIZE;
+	printk(KERN_INFO "GRU space: 0x%lx - 0x%lx\n",
+	       gru_start_paddr, gru_end_paddr);
+	irq = get_base_irq();
+	for (chip = 0; chip < GRU_CHIPLETS_PER_BLADE; chip++) {
+		ret = request_irq(irq + chip, gru_intr, 0, id, NULL);
+		if (ret) {
+			printk(KERN_ERR "%s: request_irq failed\n",
+			       GRU_DRIVER_ID_STR);
+			goto exit1;
+		}
+	}
+
+	ret = misc_register(&gru_miscdev);
+	if (ret) {
+		printk(KERN_ERR "%s: misc_register failed\n",
+		       GRU_DRIVER_ID_STR);
+		goto exit1;
+	}
+
+	ret = gru_proc_init();
+	if (ret) {
+		printk(KERN_ERR "%s: proc init failed\n", GRU_DRIVER_ID_STR);
+		goto exit2;
+	}
+
+	ret = gru_init_tables(gru_start_paddr, gru_start_vaddr);
+	if (ret) {
+		printk(KERN_ERR "%s: init tables failed\n", GRU_DRIVER_ID_STR);
+		goto exit3;
+	}
+
+	printk(KERN_INFO "%s: v%s\n", GRU_DRIVER_ID_STR,
+	       GRU_DRIVER_VERSION_STR);
+	return 0;
+
+exit3:
+	gru_proc_exit();
+exit2:
+	misc_deregister(&gru_miscdev);
+exit1:
+	for (--chip; chip >= 0; chip--)
+		free_irq(irq + chip, NULL);
+	return ret;
+
+}
+
+static void __exit gru_exit(void)
+{
+	int i, bid;
+	int order = get_order(sizeof(struct gru_state) *
+			      GRU_CHIPLETS_PER_BLADE);
+
+	for (i = 0; i < GRU_CHIPLETS_PER_BLADE; i++)
+		free_irq(IRQ_GRU + i, NULL);
+
+	for (bid = 0; bid < GRU_MAX_BLADES; bid++)
+		free_pages((unsigned long)gru_base[bid], order);
+
+	misc_deregister(&gru_miscdev);
+	gru_proc_exit();
+}
+
+static struct file_operations gru_fops = {
+	.owner		= THIS_MODULE,
+	.unlocked_ioctl	= gru_file_unlocked_ioctl,
+	.mmap		= gru_file_mmap,
+};
+
+static struct miscdevice gru_miscdev = {
+	.minor		= MISC_DYNAMIC_MINOR,
+	.name		= "gru",
+	.fops		= &gru_fops,
+};
+
+struct vm_operations_struct gru_vm_ops = {
+	.close		= gru_vma_close,
+	.fault		= gru_fault,
+};
+
+module_init(gru_init);
+module_exit(gru_exit);
+
+module_param(gru_options, ulong, 0644);
+MODULE_PARM_DESC(gru_options, "Various debug options");
+
+MODULE_AUTHOR("Silicon Graphics, Inc.");
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION(GRU_DRIVER_ID_STR GRU_DRIVER_VERSION_STR);
+MODULE_VERSION(GRU_DRIVER_VERSION_STR);
+
diff --git a/drivers/misc/sgi-gru/gruhandles.h b/drivers/misc/sgi-gru/gruhandles.h
new file mode 100644
index 000000000000..d16031d62673
--- /dev/null
+++ b/drivers/misc/sgi-gru/gruhandles.h
@@ -0,0 +1,663 @@
+/*
+ * SN Platform GRU Driver
+ *
+ *              GRU HANDLE DEFINITION
+ *
+ *  Copyright (c) 2008 Silicon Graphics, Inc.  All Rights Reserved.
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+
+#ifndef __GRUHANDLES_H__
+#define __GRUHANDLES_H__
+#include "gru_instructions.h"
+
+/*
+ * Manifest constants for GRU Memory Map
+ */
+#define GRU_GSEG0_BASE		0
+#define GRU_MCS_BASE		(64 * 1024 * 1024)
+#define GRU_SIZE		(128UL * 1024 * 1024)
+
+/* Handle & resource counts */
+#define GRU_NUM_CB		128
+#define GRU_NUM_DSR_BYTES	(32 * 1024)
+#define GRU_NUM_TFM		16
+#define GRU_NUM_TGH		24
+#define GRU_NUM_CBE		128
+#define GRU_NUM_TFH		128
+#define GRU_NUM_CCH		16
+#define GRU_NUM_GSH		1
+
+/* Maximum resource counts that can be reserved by user programs */
+#define GRU_NUM_USER_CBR	GRU_NUM_CBE
+#define GRU_NUM_USER_DSR_BYTES	GRU_NUM_DSR_BYTES
+
+/* Bytes per handle & handle stride. Code assumes all cb, tfh, cbe handles
+ * are the same */
+#define GRU_HANDLE_BYTES	64
+#define GRU_HANDLE_STRIDE	256
+
+/* Base addresses of handles */
+#define GRU_TFM_BASE		(GRU_MCS_BASE + 0x00000)
+#define GRU_TGH_BASE		(GRU_MCS_BASE + 0x08000)
+#define GRU_CBE_BASE		(GRU_MCS_BASE + 0x10000)
+#define GRU_TFH_BASE		(GRU_MCS_BASE + 0x18000)
+#define GRU_CCH_BASE		(GRU_MCS_BASE + 0x20000)
+#define GRU_GSH_BASE		(GRU_MCS_BASE + 0x30000)
+
+/* User gseg constants */
+#define GRU_GSEG_STRIDE		(4 * 1024 * 1024)
+#define GSEG_BASE(a)		((a) & ~(GRU_GSEG_PAGESIZE - 1))
+
+/* Data segment constants */
+#define GRU_DSR_AU_BYTES	1024
+#define GRU_DSR_CL		(GRU_NUM_DSR_BYTES / GRU_CACHE_LINE_BYTES)
+#define GRU_DSR_AU_CL		(GRU_DSR_AU_BYTES / GRU_CACHE_LINE_BYTES)
+#define GRU_DSR_AU		(GRU_NUM_DSR_BYTES / GRU_DSR_AU_BYTES)
+
+/* Control block constants */
+#define GRU_CBR_AU_SIZE		2
+#define GRU_CBR_AU		(GRU_NUM_CBE / GRU_CBR_AU_SIZE)
+
+/* Convert resource counts to the number of AU */
+#define GRU_DS_BYTES_TO_AU(n)	DIV_ROUND_UP(n, GRU_DSR_AU_BYTES)
+#define GRU_CB_COUNT_TO_AU(n)	DIV_ROUND_UP(n, GRU_CBR_AU_SIZE)
+
+/* UV limits */
+#define GRU_CHIPLETS_PER_HUB	2
+#define GRU_HUBS_PER_BLADE	1
+#define GRU_CHIPLETS_PER_BLADE	(GRU_HUBS_PER_BLADE * GRU_CHIPLETS_PER_HUB)
+
+/* User GRU Gseg offsets */
+#define GRU_CB_BASE		0
+#define GRU_CB_LIMIT		(GRU_CB_BASE + GRU_HANDLE_STRIDE * GRU_NUM_CBE)
+#define GRU_DS_BASE		0x20000
+#define GRU_DS_LIMIT		(GRU_DS_BASE + GRU_NUM_DSR_BYTES)
+
+/* Convert a GRU physical address to the chiplet offset */
+#define GSEGPOFF(h) 		((h) & (GRU_SIZE - 1))
+
+/* Convert an arbitrary handle address to the beginning of the GRU segment */
+#ifndef __PLUGIN__
+#define GRUBASE(h)		((void *)((unsigned long)(h) & ~(GRU_SIZE - 1)))
+#else
+extern void *gmu_grubase(void *h);
+#define GRUBASE(h)		gmu_grubase(h)
+#endif
+
+/* General addressing macros. */
+static inline void *get_gseg_base_address(void *base, int ctxnum)
+{
+	return (void *)(base + GRU_GSEG0_BASE + GRU_GSEG_STRIDE * ctxnum);
+}
+
+static inline void *get_gseg_base_address_cb(void *base, int ctxnum, int line)
+{
+	return (void *)(get_gseg_base_address(base, ctxnum) +
+			GRU_CB_BASE + GRU_HANDLE_STRIDE * line);
+}
+
+static inline void *get_gseg_base_address_ds(void *base, int ctxnum, int line)
+{
+	return (void *)(get_gseg_base_address(base, ctxnum) + GRU_DS_BASE +
+			GRU_CACHE_LINE_BYTES * line);
+}
+
+static inline struct gru_tlb_fault_map *get_tfm(void *base, int ctxnum)
+{
+	return (struct gru_tlb_fault_map *)(base + GRU_TFM_BASE +
+					ctxnum * GRU_HANDLE_STRIDE);
+}
+
+static inline struct gru_tlb_global_handle *get_tgh(void *base, int ctxnum)
+{
+	return (struct gru_tlb_global_handle *)(base + GRU_TGH_BASE +
+					ctxnum * GRU_HANDLE_STRIDE);
+}
+
+static inline struct gru_control_block_extended *get_cbe(void *base, int ctxnum)
+{
+	return (struct gru_control_block_extended *)(base + GRU_CBE_BASE +
+					ctxnum * GRU_HANDLE_STRIDE);
+}
+
+static inline struct gru_tlb_fault_handle *get_tfh(void *base, int ctxnum)
+{
+	return (struct gru_tlb_fault_handle *)(base + GRU_TFH_BASE +
+					ctxnum * GRU_HANDLE_STRIDE);
+}
+
+static inline struct gru_context_configuration_handle *get_cch(void *base,
+					int ctxnum)
+{
+	return (struct gru_context_configuration_handle *)(base +
+				GRU_CCH_BASE + ctxnum * GRU_HANDLE_STRIDE);
+}
+
+static inline unsigned long get_cb_number(void *cb)
+{
+	return (((unsigned long)cb - GRU_CB_BASE) % GRU_GSEG_PAGESIZE) /
+					GRU_HANDLE_STRIDE;
+}
+
+/* byte offset to a specific GRU chiplet. (p=pnode, c=chiplet (0 or 1)*/
+static inline unsigned long gru_chiplet_paddr(unsigned long paddr, int pnode,
+							int chiplet)
+{
+	return paddr + GRU_SIZE * (2 * pnode  + chiplet);
+}
+
+static inline void *gru_chiplet_vaddr(void *vaddr, int pnode, int chiplet)
+{
+	return vaddr + GRU_SIZE * (2 * pnode  + chiplet);
+}
+
+
+
+/*
+ * Global TLB Fault Map
+ * 	Bitmap of outstanding TLB misses needing interrupt/polling service.
+ *
+ */
+struct gru_tlb_fault_map {
+	unsigned long fault_bits[BITS_TO_LONGS(GRU_NUM_CBE)];
+	unsigned long fill0[2];
+	unsigned long done_bits[BITS_TO_LONGS(GRU_NUM_CBE)];
+	unsigned long fill1[2];
+};
+
+/*
+ * TGH - TLB Global Handle
+ * 	Used for TLB flushing.
+ *
+ */
+struct gru_tlb_global_handle {
+	unsigned int cmd:1;		/* DW 0 */
+	unsigned int delresp:1;
+	unsigned int opc:1;
+	unsigned int fill1:5;
+
+	unsigned int fill2:8;
+
+	unsigned int status:2;
+	unsigned long fill3:2;
+	unsigned int state:3;
+	unsigned long fill4:1;
+
+	unsigned int cause:3;
+	unsigned long fill5:37;
+
+	unsigned long vaddr:64;		/* DW 1 */
+
+	unsigned int asid:24;		/* DW 2 */
+	unsigned int fill6:8;
+
+	unsigned int pagesize:5;
+	unsigned int fill7:11;
+
+	unsigned int global:1;
+	unsigned int fill8:15;
+
+	unsigned long vaddrmask:39;	/* DW 3 */
+	unsigned int fill9:9;
+	unsigned int n:10;
+	unsigned int fill10:6;
+
+	unsigned int ctxbitmap:16;	/* DW4 */
+	unsigned long fill11[3];
+};
+
+enum gru_tgh_cmd {
+	TGHCMD_START
+};
+
+enum gru_tgh_opc {
+	TGHOP_TLBNOP,
+	TGHOP_TLBINV
+};
+
+enum gru_tgh_status {
+	TGHSTATUS_IDLE,
+	TGHSTATUS_EXCEPTION,
+	TGHSTATUS_ACTIVE
+};
+
+enum gru_tgh_state {
+	TGHSTATE_IDLE,
+	TGHSTATE_PE_INVAL,
+	TGHSTATE_INTERRUPT_INVAL,
+	TGHSTATE_WAITDONE,
+	TGHSTATE_RESTART_CTX,
+};
+
+/*
+ * TFH - TLB Global Handle
+ * 	Used for TLB dropins into the GRU TLB.
+ *
+ */
+struct gru_tlb_fault_handle {
+	unsigned int cmd:1;		/* DW 0 - low 32*/
+	unsigned int delresp:1;
+	unsigned int fill0:2;
+	unsigned int opc:3;
+	unsigned int fill1:9;
+
+	unsigned int status:2;
+	unsigned int fill2:1;
+	unsigned int color:1;
+	unsigned int state:3;
+	unsigned int fill3:1;
+
+	unsigned int cause:7;		/* DW 0 - high 32 */
+	unsigned int fill4:1;
+
+	unsigned int indexway:12;
+	unsigned int fill5:4;
+
+	unsigned int ctxnum:4;
+	unsigned int fill6:12;
+
+	unsigned long missvaddr:64;	/* DW 1 */
+
+	unsigned int missasid:24;	/* DW 2 */
+	unsigned int fill7:8;
+	unsigned int fillasid:24;
+	unsigned int dirty:1;
+	unsigned int gaa:2;
+	unsigned long fill8:5;
+
+	unsigned long pfn:41;		/* DW 3 */
+	unsigned int fill9:7;
+	unsigned int pagesize:5;
+	unsigned int fill10:11;
+
+	unsigned long fillvaddr:64;	/* DW 4 */
+
+	unsigned long fill11[3];
+};
+
+enum gru_tfh_opc {
+	TFHOP_NOOP,
+	TFHOP_RESTART,
+	TFHOP_WRITE_ONLY,
+	TFHOP_WRITE_RESTART,
+	TFHOP_EXCEPTION,
+	TFHOP_USER_POLLING_MODE = 7,
+};
+
+enum tfh_status {
+	TFHSTATUS_IDLE,
+	TFHSTATUS_EXCEPTION,
+	TFHSTATUS_ACTIVE,
+};
+
+enum tfh_state {
+	TFHSTATE_INACTIVE,
+	TFHSTATE_IDLE,
+	TFHSTATE_MISS_UPM,
+	TFHSTATE_MISS_FMM,
+	TFHSTATE_HW_ERR,
+	TFHSTATE_WRITE_TLB,
+	TFHSTATE_RESTART_CBR,
+};
+
+/* TFH cause bits */
+enum tfh_cause {
+	TFHCAUSE_NONE,
+	TFHCAUSE_TLB_MISS,
+	TFHCAUSE_TLB_MOD,
+	TFHCAUSE_HW_ERROR_RR,
+	TFHCAUSE_HW_ERROR_MAIN_ARRAY,
+	TFHCAUSE_HW_ERROR_VALID,
+	TFHCAUSE_HW_ERROR_PAGESIZE,
+	TFHCAUSE_INSTRUCTION_EXCEPTION,
+	TFHCAUSE_UNCORRECTIBLE_ERROR,
+};
+
+/* GAA values */
+#define GAA_RAM				0x0
+#define GAA_NCRAM			0x2
+#define GAA_MMIO			0x1
+#define GAA_REGISTER			0x3
+
+/* GRU paddr shift for pfn. (NOTE: shift is NOT by actual pagesize) */
+#define GRU_PADDR_SHIFT			12
+
+/*
+ * Context Configuration handle
+ * 	Used to allocate resources to a GSEG context.
+ *
+ */
+struct gru_context_configuration_handle {
+	unsigned int cmd:1;			/* DW0 */
+	unsigned int delresp:1;
+	unsigned int opc:3;
+	unsigned int unmap_enable:1;
+	unsigned int req_slice_set_enable:1;
+	unsigned int req_slice:2;
+	unsigned int cb_int_enable:1;
+	unsigned int tlb_int_enable:1;
+	unsigned int tfm_fault_bit_enable:1;
+	unsigned int tlb_int_select:4;
+
+	unsigned int status:2;
+	unsigned int state:2;
+	unsigned int reserved2:4;
+
+	unsigned int cause:4;
+	unsigned int tfm_done_bit_enable:1;
+	unsigned int unused:3;
+
+	unsigned int dsr_allocation_map;
+
+	unsigned long cbr_allocation_map;	/* DW1 */
+
+	unsigned int asid[8];			/* DW 2 - 5 */
+	unsigned short sizeavail[8];		/* DW 6 - 7 */
+} __attribute__ ((packed));
+
+enum gru_cch_opc {
+	CCHOP_START = 1,
+	CCHOP_ALLOCATE,
+	CCHOP_INTERRUPT,
+	CCHOP_DEALLOCATE,
+	CCHOP_INTERRUPT_SYNC,
+};
+
+enum gru_cch_status {
+	CCHSTATUS_IDLE,
+	CCHSTATUS_EXCEPTION,
+	CCHSTATUS_ACTIVE,
+};
+
+enum gru_cch_state {
+	CCHSTATE_INACTIVE,
+	CCHSTATE_MAPPED,
+	CCHSTATE_ACTIVE,
+	CCHSTATE_INTERRUPTED,
+};
+
+/* CCH Exception cause */
+enum gru_cch_cause {
+	CCHCAUSE_REGION_REGISTER_WRITE_ERROR = 1,
+	CCHCAUSE_ILLEGAL_OPCODE = 2,
+	CCHCAUSE_INVALID_START_REQUEST = 3,
+	CCHCAUSE_INVALID_ALLOCATION_REQUEST = 4,
+	CCHCAUSE_INVALID_DEALLOCATION_REQUEST = 5,
+	CCHCAUSE_INVALID_INTERRUPT_REQUEST = 6,
+	CCHCAUSE_CCH_BUSY = 7,
+	CCHCAUSE_NO_CBRS_TO_ALLOCATE = 8,
+	CCHCAUSE_BAD_TFM_CONFIG = 9,
+	CCHCAUSE_CBR_RESOURCES_OVERSUBSCRIPED = 10,
+	CCHCAUSE_DSR_RESOURCES_OVERSUBSCRIPED = 11,
+	CCHCAUSE_CBR_DEALLOCATION_ERROR = 12,
+};
+/*
+ * CBE - Control Block Extended
+ * 	Maintains internal GRU state for active CBs.
+ *
+ */
+struct gru_control_block_extended {
+	unsigned int reserved0:1;	/* DW 0  - low */
+	unsigned int imacpy:3;
+	unsigned int reserved1:4;
+	unsigned int xtypecpy:3;
+	unsigned int iaa0cpy:2;
+	unsigned int iaa1cpy:2;
+	unsigned int reserved2:1;
+	unsigned int opccpy:8;
+	unsigned int exopccpy:8;
+
+	unsigned int idef2cpy:22;	/* DW 0  - high */
+	unsigned int reserved3:10;
+
+	unsigned int idef4cpy:22;	/* DW 1 */
+	unsigned int reserved4:10;
+	unsigned int idef4upd:22;
+	unsigned int reserved5:10;
+
+	unsigned long idef1upd:64;	/* DW 2 */
+
+	unsigned long idef5cpy:64;	/* DW 3 */
+
+	unsigned long idef6cpy:64;	/* DW 4 */
+
+	unsigned long idef3upd:64;	/* DW 5 */
+
+	unsigned long idef5upd:64;	/* DW 6 */
+
+	unsigned int idef2upd:22;	/* DW 7 */
+	unsigned int reserved6:10;
+
+	unsigned int ecause:20;
+	unsigned int cbrstate:4;
+	unsigned int cbrexecstatus:8;
+};
+
+enum gru_cbr_state {
+	CBRSTATE_INACTIVE,
+	CBRSTATE_IDLE,
+	CBRSTATE_PE_CHECK,
+	CBRSTATE_QUEUED,
+	CBRSTATE_WAIT_RESPONSE,
+	CBRSTATE_INTERRUPTED,
+	CBRSTATE_INTERRUPTED_MISS_FMM,
+	CBRSTATE_BUSY_INTERRUPT_MISS_FMM,
+	CBRSTATE_INTERRUPTED_MISS_UPM,
+	CBRSTATE_BUSY_INTERRUPTED_MISS_UPM,
+	CBRSTATE_REQUEST_ISSUE,
+	CBRSTATE_BUSY_INTERRUPT,
+};
+
+/* CBE cbrexecstatus bits */
+#define CBR_EXS_ABORT_OCC_BIT			0
+#define CBR_EXS_INT_OCC_BIT			1
+#define CBR_EXS_PENDING_BIT			2
+#define CBR_EXS_QUEUED_BIT			3
+#define CBR_EXS_TLBHW_BIT			4
+#define CBR_EXS_EXCEPTION_BIT			5
+
+#define CBR_EXS_ABORT_OCC			(1 << CBR_EXS_ABORT_OCC_BIT)
+#define CBR_EXS_INT_OCC				(1 << CBR_EXS_INT_OCC_BIT)
+#define CBR_EXS_PENDING				(1 << CBR_EXS_PENDING_BIT)
+#define CBR_EXS_QUEUED				(1 << CBR_EXS_QUEUED_BIT)
+#define CBR_EXS_TLBHW				(1 << CBR_EXS_TLBHW_BIT)
+#define CBR_EXS_EXCEPTION			(1 << CBR_EXS_EXCEPTION_BIT)
+
+/* CBE ecause bits  - defined in gru_instructions.h */
+
+/*
+ * Convert a processor pagesize into the strange encoded pagesize used by the
+ * GRU. Processor pagesize is encoded as log of bytes per page. (or PAGE_SHIFT)
+ * 	pagesize	log pagesize	grupagesize
+ * 	  4k			12	0
+ * 	 16k 			14	1
+ * 	 64k			16	2
+ * 	256k			18	3
+ * 	  1m			20	4
+ * 	  2m			21	5
+ * 	  4m			22	6
+ * 	 16m			24	7
+ * 	 64m			26	8
+ * 	...
+ */
+#define GRU_PAGESIZE(sh)	((((sh) > 20 ? (sh) + 2: (sh)) >> 1) - 6)
+#define GRU_SIZEAVAIL(sh)	(1UL << GRU_PAGESIZE(sh))
+
+/* minimum TLB purge count to ensure a full purge */
+#define GRUMAXINVAL		1024UL
+
+
+/* Extract the status field from a kernel handle */
+#define GET_MSEG_HANDLE_STATUS(h)	(((*(unsigned long *)(h)) >> 16) & 3)
+
+static inline void start_instruction(void *h)
+{
+	unsigned long *w0 = h;
+
+	wmb();		/* setting CMD bit must be last */
+	*w0 = *w0 | 1;
+	gru_flush_cache(h);
+}
+
+static inline int wait_instruction_complete(void *h)
+{
+	int status;
+
+	do {
+		cpu_relax();
+		barrier();
+		status = GET_MSEG_HANDLE_STATUS(h);
+	} while (status == CCHSTATUS_ACTIVE);
+	return status;
+}
+
+#if defined CONFIG_IA64
+static inline void cch_allocate_set_asids(
+		  struct gru_context_configuration_handle *cch, int asidval)
+{
+	int i;
+
+	for (i = 0; i <= RGN_HPAGE; i++) {  /*  assume HPAGE is last region */
+		cch->asid[i] = (asidval++);
+#if 0
+		/* ZZZ hugepages not supported yet */
+		if (i == RGN_HPAGE)
+			cch->sizeavail[i] = GRU_SIZEAVAIL(hpage_shift);
+		else
+#endif
+			cch->sizeavail[i] = GRU_SIZEAVAIL(PAGE_SHIFT);
+	}
+}
+#elif defined CONFIG_X86_64
+static inline void cch_allocate_set_asids(
+		  struct gru_context_configuration_handle *cch, int asidval)
+{
+	int i;
+
+	for (i = 0; i < 8; i++) {
+		cch->asid[i] = asidval++;
+		cch->sizeavail[i] = GRU_SIZEAVAIL(PAGE_SHIFT) |
+			GRU_SIZEAVAIL(21);
+	}
+}
+#endif
+
+static inline int cch_allocate(struct gru_context_configuration_handle *cch,
+			       int asidval, unsigned long cbrmap,
+			       unsigned long dsrmap)
+{
+	cch_allocate_set_asids(cch, asidval);
+	cch->dsr_allocation_map = dsrmap;
+	cch->cbr_allocation_map = cbrmap;
+	cch->opc = CCHOP_ALLOCATE;
+	start_instruction(cch);
+	return wait_instruction_complete(cch);
+}
+
+static inline int cch_start(struct gru_context_configuration_handle *cch)
+{
+	cch->opc = CCHOP_START;
+	start_instruction(cch);
+	return wait_instruction_complete(cch);
+}
+
+static inline int cch_interrupt(struct gru_context_configuration_handle *cch)
+{
+	cch->opc = CCHOP_INTERRUPT;
+	start_instruction(cch);
+	return wait_instruction_complete(cch);
+}
+
+static inline int cch_deallocate(struct gru_context_configuration_handle *cch)
+{
+	cch->opc = CCHOP_DEALLOCATE;
+	start_instruction(cch);
+	return wait_instruction_complete(cch);
+}
+
+static inline int cch_interrupt_sync(struct gru_context_configuration_handle
+				     *cch)
+{
+	cch->opc = CCHOP_INTERRUPT_SYNC;
+	start_instruction(cch);
+	return wait_instruction_complete(cch);
+}
+
+static inline int tgh_invalidate(struct gru_tlb_global_handle *tgh,
+				 unsigned long vaddr, unsigned long vaddrmask,
+				 int asid, int pagesize, int global, int n,
+				 unsigned short ctxbitmap)
+{
+	tgh->vaddr = vaddr;
+	tgh->asid = asid;
+	tgh->pagesize = pagesize;
+	tgh->n = n;
+	tgh->global = global;
+	tgh->vaddrmask = vaddrmask;
+	tgh->ctxbitmap = ctxbitmap;
+	tgh->opc = TGHOP_TLBINV;
+	start_instruction(tgh);
+	return wait_instruction_complete(tgh);
+}
+
+static inline void tfh_write_only(struct gru_tlb_fault_handle *tfh,
+				  unsigned long pfn, unsigned long vaddr,
+				  int asid, int dirty, int pagesize)
+{
+	tfh->fillasid = asid;
+	tfh->fillvaddr = vaddr;
+	tfh->pfn = pfn;
+	tfh->dirty = dirty;
+	tfh->pagesize = pagesize;
+	tfh->opc = TFHOP_WRITE_ONLY;
+	start_instruction(tfh);
+}
+
+static inline void tfh_write_restart(struct gru_tlb_fault_handle *tfh,
+				     unsigned long paddr, int gaa,
+				     unsigned long vaddr, int asid, int dirty,
+				     int pagesize)
+{
+	tfh->fillasid = asid;
+	tfh->fillvaddr = vaddr;
+	tfh->pfn = paddr >> GRU_PADDR_SHIFT;
+	tfh->gaa = gaa;
+	tfh->dirty = dirty;
+	tfh->pagesize = pagesize;
+	tfh->opc = TFHOP_WRITE_RESTART;
+	start_instruction(tfh);
+}
+
+static inline void tfh_restart(struct gru_tlb_fault_handle *tfh)
+{
+	tfh->opc = TFHOP_RESTART;
+	start_instruction(tfh);
+}
+
+static inline void tfh_user_polling_mode(struct gru_tlb_fault_handle *tfh)
+{
+	tfh->opc = TFHOP_USER_POLLING_MODE;
+	start_instruction(tfh);
+}
+
+static inline void tfh_exception(struct gru_tlb_fault_handle *tfh)
+{
+	tfh->opc = TFHOP_EXCEPTION;
+	start_instruction(tfh);
+}
+
+#endif /* __GRUHANDLES_H__ */
diff --git a/drivers/misc/sgi-gru/grukservices.c b/drivers/misc/sgi-gru/grukservices.c
new file mode 100644
index 000000000000..dfd49af0fe18
--- /dev/null
+++ b/drivers/misc/sgi-gru/grukservices.c
@@ -0,0 +1,679 @@
+/*
+ * SN Platform GRU Driver
+ *
+ *              KERNEL SERVICES THAT USE THE GRU
+ *
+ *  Copyright (c) 2008 Silicon Graphics, Inc.  All Rights Reserved.
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/slab.h>
+#include <linux/mm.h>
+#include <linux/smp_lock.h>
+#include <linux/spinlock.h>
+#include <linux/device.h>
+#include <linux/miscdevice.h>
+#include <linux/proc_fs.h>
+#include <linux/interrupt.h>
+#include <linux/uaccess.h>
+#include "gru.h"
+#include "grulib.h"
+#include "grutables.h"
+#include "grukservices.h"
+#include "gru_instructions.h"
+#include <asm/uv/uv_hub.h>
+
+/*
+ * Kernel GRU Usage
+ *
+ * The following is an interim algorithm for management of kernel GRU
+ * resources. This will likely be replaced when we better understand the
+ * kernel/user requirements.
+ *
+ * At boot time, the kernel permanently reserves a fixed number of
+ * CBRs/DSRs for each cpu to use. The resources are all taken from
+ * the GRU chiplet 1 on the blade. This leaves the full set of resources
+ * of chiplet 0 available to be allocated to a single user.
+ */
+
+/* Blade percpu resources PERMANENTLY reserved for kernel use */
+#define GRU_NUM_KERNEL_CBR      1
+#define GRU_NUM_KERNEL_DSR_BYTES 256
+#define KERNEL_CTXNUM           15
+
+/* GRU instruction attributes for all instructions */
+#define IMA			IMA_CB_DELAY
+
+/* GRU cacheline size is always 64 bytes - even on arches with 128 byte lines */
+#define __gru_cacheline_aligned__                               \
+	__attribute__((__aligned__(GRU_CACHE_LINE_BYTES)))
+
+#define MAGIC	0x1234567887654321UL
+
+/* Default retry count for GRU errors on kernel instructions */
+#define EXCEPTION_RETRY_LIMIT	3
+
+/* Status of message queue sections */
+#define MQS_EMPTY		0
+#define MQS_FULL		1
+#define MQS_NOOP		2
+
+/*----------------- RESOURCE MANAGEMENT -------------------------------------*/
+/* optimized for x86_64 */
+struct message_queue {
+	union gru_mesqhead	head __gru_cacheline_aligned__;	/* CL 0 */
+	int			qlines;				/* DW 1 */
+	long 			hstatus[2];
+	void 			*next __gru_cacheline_aligned__;/* CL 1 */
+	void 			*limit;
+	void 			*start;
+	void 			*start2;
+	char			data ____cacheline_aligned;	/* CL 2 */
+};
+
+/* First word in every message - used by mesq interface */
+struct message_header {
+	char	present;
+	char	present2;
+	char 	lines;
+	char	fill;
+};
+
+#define QLINES(mq)	((mq) + offsetof(struct message_queue, qlines))
+#define HSTATUS(mq, h)	((mq) + offsetof(struct message_queue, hstatus[h]))
+
+static int gru_get_cpu_resources(int dsr_bytes, void **cb, void **dsr)
+{
+	struct gru_blade_state *bs;
+	int lcpu;
+
+	BUG_ON(dsr_bytes > GRU_NUM_KERNEL_DSR_BYTES);
+	preempt_disable();
+	bs = gru_base[uv_numa_blade_id()];
+	lcpu = uv_blade_processor_id();
+	*cb = bs->kernel_cb + lcpu * GRU_HANDLE_STRIDE;
+	*dsr = bs->kernel_dsr + lcpu * GRU_NUM_KERNEL_DSR_BYTES;
+	return 0;
+}
+
+static void gru_free_cpu_resources(void *cb, void *dsr)
+{
+	preempt_enable();
+}
+
+int gru_get_cb_exception_detail(void *cb,
+		struct control_block_extended_exc_detail *excdet)
+{
+	struct gru_control_block_extended *cbe;
+
+	cbe = get_cbe(GRUBASE(cb), get_cb_number(cb));
+	excdet->opc = cbe->opccpy;
+	excdet->exopc = cbe->exopccpy;
+	excdet->ecause = cbe->ecause;
+	excdet->exceptdet0 = cbe->idef1upd;
+	excdet->exceptdet1 = cbe->idef3upd;
+	return 0;
+}
+
+char *gru_get_cb_exception_detail_str(int ret, void *cb,
+				      char *buf, int size)
+{
+	struct gru_control_block_status *gen = (void *)cb;
+	struct control_block_extended_exc_detail excdet;
+
+	if (ret > 0 && gen->istatus == CBS_EXCEPTION) {
+		gru_get_cb_exception_detail(cb, &excdet);
+		snprintf(buf, size,
+			"GRU exception: cb %p, opc %d, exopc %d, ecause 0x%x,"
+			"excdet0 0x%lx, excdet1 0x%x",
+			gen, excdet.opc, excdet.exopc, excdet.ecause,
+			excdet.exceptdet0, excdet.exceptdet1);
+	} else {
+		snprintf(buf, size, "No exception");
+	}
+	return buf;
+}
+
+static int gru_wait_idle_or_exception(struct gru_control_block_status *gen)
+{
+	while (gen->istatus >= CBS_ACTIVE) {
+		cpu_relax();
+		barrier();
+	}
+	return gen->istatus;
+}
+
+static int gru_retry_exception(void *cb)
+{
+	struct gru_control_block_status *gen = (void *)cb;
+	struct control_block_extended_exc_detail excdet;
+	int retry = EXCEPTION_RETRY_LIMIT;
+
+	while (1)  {
+		if (gru_get_cb_message_queue_substatus(cb))
+			break;
+		if (gru_wait_idle_or_exception(gen) == CBS_IDLE)
+			return CBS_IDLE;
+
+		gru_get_cb_exception_detail(cb, &excdet);
+		if (excdet.ecause & ~EXCEPTION_RETRY_BITS)
+			break;
+		if (retry-- == 0)
+			break;
+		gen->icmd = 1;
+		gru_flush_cache(gen);
+	}
+	return CBS_EXCEPTION;
+}
+
+int gru_check_status_proc(void *cb)
+{
+	struct gru_control_block_status *gen = (void *)cb;
+	int ret;
+
+	ret = gen->istatus;
+	if (ret != CBS_EXCEPTION)
+		return ret;
+	return gru_retry_exception(cb);
+
+}
+
+int gru_wait_proc(void *cb)
+{
+	struct gru_control_block_status *gen = (void *)cb;
+	int ret;
+
+	ret = gru_wait_idle_or_exception(gen);
+	if (ret == CBS_EXCEPTION)
+		ret = gru_retry_exception(cb);
+
+	return ret;
+}
+
+void gru_abort(int ret, void *cb, char *str)
+{
+	char buf[GRU_EXC_STR_SIZE];
+
+	panic("GRU FATAL ERROR: %s - %s\n", str,
+	      gru_get_cb_exception_detail_str(ret, cb, buf, sizeof(buf)));
+}
+
+void gru_wait_abort_proc(void *cb)
+{
+	int ret;
+
+	ret = gru_wait_proc(cb);
+	if (ret)
+		gru_abort(ret, cb, "gru_wait_abort");
+}
+
+
+/*------------------------------ MESSAGE QUEUES -----------------------------*/
+
+/* Internal status . These are NOT returned to the user. */
+#define MQIE_AGAIN		-1	/* try again */
+
+
+/*
+ * Save/restore the "present" flag that is in the second line of 2-line
+ * messages
+ */
+static inline int get_present2(void *p)
+{
+	struct message_header *mhdr = p + GRU_CACHE_LINE_BYTES;
+	return mhdr->present;
+}
+
+static inline void restore_present2(void *p, int val)
+{
+	struct message_header *mhdr = p + GRU_CACHE_LINE_BYTES;
+	mhdr->present = val;
+}
+
+/*
+ * Create a message queue.
+ * 	qlines - message queue size in cache lines. Includes 2-line header.
+ */
+int gru_create_message_queue(void *p, unsigned int bytes)
+{
+	struct message_queue *mq = p;
+	unsigned int qlines;
+
+	qlines = bytes / GRU_CACHE_LINE_BYTES - 2;
+	memset(mq, 0, bytes);
+	mq->start = &mq->data;
+	mq->start2 = &mq->data + (qlines / 2 - 1) * GRU_CACHE_LINE_BYTES;
+	mq->next = &mq->data;
+	mq->limit = &mq->data + (qlines - 2) * GRU_CACHE_LINE_BYTES;
+	mq->qlines = qlines;
+	mq->hstatus[0] = 0;
+	mq->hstatus[1] = 1;
+	mq->head = gru_mesq_head(2, qlines / 2 + 1);
+	return 0;
+}
+EXPORT_SYMBOL_GPL(gru_create_message_queue);
+
+/*
+ * Send a NOOP message to a message queue
+ * 	Returns:
+ * 		 0 - if queue is full after the send. This is the normal case
+ * 		     but various races can change this.
+ *		-1 - if mesq sent successfully but queue not full
+ *		>0 - unexpected error. MQE_xxx returned
+ */
+static int send_noop_message(void *cb,
+				unsigned long mq, void *mesg)
+{
+	const struct message_header noop_header = {
+					.present = MQS_NOOP, .lines = 1};
+	unsigned long m;
+	int substatus, ret;
+	struct message_header save_mhdr, *mhdr = mesg;
+
+	STAT(mesq_noop);
+	save_mhdr = *mhdr;
+	*mhdr = noop_header;
+	gru_mesq(cb, mq, gru_get_tri(mhdr), 1, IMA);
+	ret = gru_wait(cb);
+
+	if (ret) {
+		substatus = gru_get_cb_message_queue_substatus(cb);
+		switch (substatus) {
+		case CBSS_NO_ERROR:
+			STAT(mesq_noop_unexpected_error);
+			ret = MQE_UNEXPECTED_CB_ERR;
+			break;
+		case CBSS_LB_OVERFLOWED:
+			STAT(mesq_noop_lb_overflow);
+			ret = MQE_CONGESTION;
+			break;
+		case CBSS_QLIMIT_REACHED:
+			STAT(mesq_noop_qlimit_reached);
+			ret = 0;
+			break;
+		case CBSS_AMO_NACKED:
+			STAT(mesq_noop_amo_nacked);
+			ret = MQE_CONGESTION;
+			break;
+		case CBSS_PUT_NACKED:
+			STAT(mesq_noop_put_nacked);
+			m = mq + (gru_get_amo_value_head(cb) << 6);
+			gru_vstore(cb, m, gru_get_tri(mesg), XTYPE_CL, 1, 1,
+						IMA);
+			if (gru_wait(cb) == CBS_IDLE)
+				ret = MQIE_AGAIN;
+			else
+				ret = MQE_UNEXPECTED_CB_ERR;
+			break;
+		case CBSS_PAGE_OVERFLOW:
+		default:
+			BUG();
+		}
+	}
+	*mhdr = save_mhdr;
+	return ret;
+}
+
+/*
+ * Handle a gru_mesq full.
+ */
+static int send_message_queue_full(void *cb,
+			   unsigned long mq, void *mesg, int lines)
+{
+	union gru_mesqhead mqh;
+	unsigned int limit, head;
+	unsigned long avalue;
+	int half, qlines, save;
+
+	/* Determine if switching to first/second half of q */
+	avalue = gru_get_amo_value(cb);
+	head = gru_get_amo_value_head(cb);
+	limit = gru_get_amo_value_limit(cb);
+
+	/*
+	 * Fetch "qlines" from the queue header. Since the queue may be
+	 * in memory that can't be accessed using socket addresses, use
+	 * the GRU to access the data. Use DSR space from the message.
+	 */
+	save = *(int *)mesg;
+	gru_vload(cb, QLINES(mq), gru_get_tri(mesg), XTYPE_W, 1, 1, IMA);
+	if (gru_wait(cb) != CBS_IDLE)
+		goto cberr;
+	qlines = *(int *)mesg;
+	*(int *)mesg = save;
+	half = (limit != qlines);
+
+	if (half)
+		mqh = gru_mesq_head(qlines / 2 + 1, qlines);
+	else
+		mqh = gru_mesq_head(2, qlines / 2 + 1);
+
+	/* Try to get lock for switching head pointer */
+	gru_gamir(cb, EOP_IR_CLR, HSTATUS(mq, half), XTYPE_DW, IMA);
+	if (gru_wait(cb) != CBS_IDLE)
+		goto cberr;
+	if (!gru_get_amo_value(cb)) {
+		STAT(mesq_qf_locked);
+		return MQE_QUEUE_FULL;
+	}
+
+	/* Got the lock. Send optional NOP if queue not full, */
+	if (head != limit) {
+		if (send_noop_message(cb, mq, mesg)) {
+			gru_gamir(cb, EOP_IR_INC, HSTATUS(mq, half),
+					XTYPE_DW, IMA);
+			if (gru_wait(cb) != CBS_IDLE)
+				goto cberr;
+			STAT(mesq_qf_noop_not_full);
+			return MQIE_AGAIN;
+		}
+		avalue++;
+	}
+
+	/* Then flip queuehead to other half of queue. */
+	gru_gamer(cb, EOP_ERR_CSWAP, mq, XTYPE_DW, mqh.val, avalue, IMA);
+	if (gru_wait(cb) != CBS_IDLE)
+		goto cberr;
+
+	/* If not successfully in swapping queue head, clear the hstatus lock */
+	if (gru_get_amo_value(cb) != avalue) {
+		STAT(mesq_qf_switch_head_failed);
+		gru_gamir(cb, EOP_IR_INC, HSTATUS(mq, half), XTYPE_DW, IMA);
+		if (gru_wait(cb) != CBS_IDLE)
+			goto cberr;
+	}
+	return MQIE_AGAIN;
+cberr:
+	STAT(mesq_qf_unexpected_error);
+	return MQE_UNEXPECTED_CB_ERR;
+}
+
+
+/*
+ * Handle a gru_mesq failure. Some of these failures are software recoverable
+ * or retryable.
+ */
+static int send_message_failure(void *cb,
+				unsigned long mq,
+				void *mesg,
+				int lines)
+{
+	int substatus, ret = 0;
+	unsigned long m;
+
+	substatus = gru_get_cb_message_queue_substatus(cb);
+	switch (substatus) {
+	case CBSS_NO_ERROR:
+		STAT(mesq_send_unexpected_error);
+		ret = MQE_UNEXPECTED_CB_ERR;
+		break;
+	case CBSS_LB_OVERFLOWED:
+		STAT(mesq_send_lb_overflow);
+		ret = MQE_CONGESTION;
+		break;
+	case CBSS_QLIMIT_REACHED:
+		STAT(mesq_send_qlimit_reached);
+		ret = send_message_queue_full(cb, mq, mesg, lines);
+		break;
+	case CBSS_AMO_NACKED:
+		STAT(mesq_send_amo_nacked);
+		ret = MQE_CONGESTION;
+		break;
+	case CBSS_PUT_NACKED:
+		STAT(mesq_send_put_nacked);
+		m =mq + (gru_get_amo_value_head(cb) << 6);
+		gru_vstore(cb, m, gru_get_tri(mesg), XTYPE_CL, lines, 1, IMA);
+		if (gru_wait(cb) == CBS_IDLE)
+			ret = MQE_OK;
+		else
+			ret = MQE_UNEXPECTED_CB_ERR;
+		break;
+	default:
+		BUG();
+	}
+	return ret;
+}
+
+/*
+ * Send a message to a message queue
+ * 	cb	GRU control block to use to send message
+ * 	mq	message queue
+ * 	mesg	message. ust be vaddr within a GSEG
+ * 	bytes	message size (<= 2 CL)
+ */
+int gru_send_message_gpa(unsigned long mq, void *mesg, unsigned int bytes)
+{
+	struct message_header *mhdr;
+	void *cb;
+	void *dsr;
+	int istatus, clines, ret;
+
+	STAT(mesq_send);
+	BUG_ON(bytes < sizeof(int) || bytes > 2 * GRU_CACHE_LINE_BYTES);
+
+	clines = (bytes + GRU_CACHE_LINE_BYTES - 1) / GRU_CACHE_LINE_BYTES;
+	if (gru_get_cpu_resources(bytes, &cb, &dsr))
+		return MQE_BUG_NO_RESOURCES;
+	memcpy(dsr, mesg, bytes);
+	mhdr = dsr;
+	mhdr->present = MQS_FULL;
+	mhdr->lines = clines;
+	if (clines == 2) {
+		mhdr->present2 = get_present2(mhdr);
+		restore_present2(mhdr, MQS_FULL);
+	}
+
+	do {
+		ret = MQE_OK;
+		gru_mesq(cb, mq, gru_get_tri(mhdr), clines, IMA);
+		istatus = gru_wait(cb);
+		if (istatus != CBS_IDLE)
+			ret = send_message_failure(cb, mq, dsr, clines);
+	} while (ret == MQIE_AGAIN);
+	gru_free_cpu_resources(cb, dsr);
+
+	if (ret)
+		STAT(mesq_send_failed);
+	return ret;
+}
+EXPORT_SYMBOL_GPL(gru_send_message_gpa);
+
+/*
+ * Advance the receive pointer for the queue to the next message.
+ */
+void gru_free_message(void *rmq, void *mesg)
+{
+	struct message_queue *mq = rmq;
+	struct message_header *mhdr = mq->next;
+	void *next, *pnext;
+	int half = -1;
+	int lines = mhdr->lines;
+
+	if (lines == 2)
+		restore_present2(mhdr, MQS_EMPTY);
+	mhdr->present = MQS_EMPTY;
+
+	pnext = mq->next;
+	next = pnext + GRU_CACHE_LINE_BYTES * lines;
+	if (next == mq->limit) {
+		next = mq->start;
+		half = 1;
+	} else if (pnext < mq->start2 && next >= mq->start2) {
+		half = 0;
+	}
+
+	if (half >= 0)
+		mq->hstatus[half] = 1;
+	mq->next = next;
+}
+EXPORT_SYMBOL_GPL(gru_free_message);
+
+/*
+ * Get next message from message queue. Return NULL if no message
+ * present. User must call next_message() to move to next message.
+ * 	rmq	message queue
+ */
+void *gru_get_next_message(void *rmq)
+{
+	struct message_queue *mq = rmq;
+	struct message_header *mhdr = mq->next;
+	int present = mhdr->present;
+
+	/* skip NOOP messages */
+	STAT(mesq_receive);
+	while (present == MQS_NOOP) {
+		gru_free_message(rmq, mhdr);
+		mhdr = mq->next;
+		present = mhdr->present;
+	}
+
+	/* Wait for both halves of 2 line messages */
+	if (present == MQS_FULL && mhdr->lines == 2 &&
+				get_present2(mhdr) == MQS_EMPTY)
+		present = MQS_EMPTY;
+
+	if (!present) {
+		STAT(mesq_receive_none);
+		return NULL;
+	}
+
+	if (mhdr->lines == 2)
+		restore_present2(mhdr, mhdr->present2);
+
+	return mhdr;
+}
+EXPORT_SYMBOL_GPL(gru_get_next_message);
+
+/* ---------------------- GRU DATA COPY FUNCTIONS ---------------------------*/
+
+/*
+ * Copy a block of data using the GRU resources
+ */
+int gru_copy_gpa(unsigned long dest_gpa, unsigned long src_gpa,
+				unsigned int bytes)
+{
+	void *cb;
+	void *dsr;
+	int ret;
+
+	STAT(copy_gpa);
+	if (gru_get_cpu_resources(GRU_NUM_KERNEL_DSR_BYTES, &cb, &dsr))
+		return MQE_BUG_NO_RESOURCES;
+	gru_bcopy(cb, src_gpa, dest_gpa, gru_get_tri(dsr),
+		  XTYPE_B, bytes, GRU_NUM_KERNEL_DSR_BYTES, IMA);
+	ret = gru_wait(cb);
+	gru_free_cpu_resources(cb, dsr);
+	return ret;
+}
+EXPORT_SYMBOL_GPL(gru_copy_gpa);
+
+/* ------------------- KERNEL QUICKTESTS RUN AT STARTUP ----------------*/
+/* 	Temp - will delete after we gain confidence in the GRU		*/
+static __cacheline_aligned unsigned long word0;
+static __cacheline_aligned unsigned long word1;
+
+static int quicktest(struct gru_state *gru)
+{
+	void *cb;
+	void *ds;
+	unsigned long *p;
+
+	cb = get_gseg_base_address_cb(gru->gs_gru_base_vaddr, KERNEL_CTXNUM, 0);
+	ds = get_gseg_base_address_ds(gru->gs_gru_base_vaddr, KERNEL_CTXNUM, 0);
+	p = ds;
+	word0 = MAGIC;
+
+	gru_vload(cb, uv_gpa(&word0), 0, XTYPE_DW, 1, 1, IMA);
+	if (gru_wait(cb) != CBS_IDLE)
+		BUG();
+
+	if (*(unsigned long *)ds != MAGIC)
+		BUG();
+	gru_vstore(cb, uv_gpa(&word1), 0, XTYPE_DW, 1, 1, IMA);
+	if (gru_wait(cb) != CBS_IDLE)
+		BUG();
+
+	if (word0 != word1 || word0 != MAGIC) {
+		printk
+		    ("GRU quicktest err: gru %d, found 0x%lx, expected 0x%lx\n",
+		     gru->gs_gid, word1, MAGIC);
+		BUG();		/* ZZZ should not be fatal */
+	}
+
+	return 0;
+}
+
+
+int gru_kservices_init(struct gru_state *gru)
+{
+	struct gru_blade_state *bs;
+	struct gru_context_configuration_handle *cch;
+	unsigned long cbr_map, dsr_map;
+	int err, num, cpus_possible;
+
+	/*
+	 * Currently, resources are reserved ONLY on the second chiplet
+	 * on each blade. This leaves ALL resources on chiplet 0 available
+	 * for user code.
+	 */
+	bs = gru->gs_blade;
+	if (gru != &bs->bs_grus[1])
+		return 0;
+
+	cpus_possible = uv_blade_nr_possible_cpus(gru->gs_blade_id);
+
+	num = GRU_NUM_KERNEL_CBR * cpus_possible;
+	cbr_map = gru_reserve_cb_resources(gru, GRU_CB_COUNT_TO_AU(num), NULL);
+	gru->gs_reserved_cbrs += num;
+
+	num = GRU_NUM_KERNEL_DSR_BYTES * cpus_possible;
+	dsr_map = gru_reserve_ds_resources(gru, GRU_DS_BYTES_TO_AU(num), NULL);
+	gru->gs_reserved_dsr_bytes += num;
+
+	gru->gs_active_contexts++;
+	__set_bit(KERNEL_CTXNUM, &gru->gs_context_map);
+	cch = get_cch(gru->gs_gru_base_vaddr, KERNEL_CTXNUM);
+
+	bs->kernel_cb = get_gseg_base_address_cb(gru->gs_gru_base_vaddr,
+					KERNEL_CTXNUM, 0);
+	bs->kernel_dsr = get_gseg_base_address_ds(gru->gs_gru_base_vaddr,
+					KERNEL_CTXNUM, 0);
+
+	lock_cch_handle(cch);
+	cch->tfm_fault_bit_enable = 0;
+	cch->tlb_int_enable = 0;
+	cch->tfm_done_bit_enable = 0;
+	cch->unmap_enable = 1;
+	err = cch_allocate(cch, 0, cbr_map, dsr_map);
+	if (err) {
+		gru_dbg(grudev,
+			"Unable to allocate kernel CCH: gru %d, err %d\n",
+			gru->gs_gid, err);
+		BUG();
+	}
+	if (cch_start(cch)) {
+		gru_dbg(grudev, "Unable to start kernel CCH: gru %d, err %d\n",
+			gru->gs_gid, err);
+		BUG();
+	}
+	unlock_cch_handle(cch);
+
+	if (gru_options & GRU_QUICKLOOK)
+		quicktest(gru);
+	return 0;
+}
diff --git a/drivers/misc/sgi-gru/grukservices.h b/drivers/misc/sgi-gru/grukservices.h
new file mode 100644
index 000000000000..eb17e0a3ac61
--- /dev/null
+++ b/drivers/misc/sgi-gru/grukservices.h
@@ -0,0 +1,134 @@
+
+/*
+ *  Copyright (c) 2008 Silicon Graphics, Inc.  All Rights Reserved.
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+#ifndef __GRU_KSERVICES_H_
+#define __GRU_KSERVICES_H_
+
+
+/*
+ * Message queues using the GRU to send/receive messages.
+ *
+ * These function allow the user to create a message queue for
+ * sending/receiving 1 or 2 cacheline messages using the GRU.
+ *
+ * Processes SENDING messages will use a kernel CBR/DSR to send
+ * the message. This is transparent to the caller.
+ *
+ * The receiver does not use any GRU resources.
+ *
+ * The functions support:
+ * 	- single receiver
+ * 	- multiple senders
+ *	- cross partition message
+ *
+ * Missing features ZZZ:
+ * 	- user options for dealing with timeouts, queue full, etc.
+ * 	- gru_create_message_queue() needs interrupt vector info
+ */
+
+/*
+ * Initialize a user allocated chunk of memory to be used as
+ * a message queue. The caller must ensure that the queue is
+ * in contiguous physical memory and is cacheline aligned.
+ *
+ * Message queue size is the total number of bytes allocated
+ * to the queue including a 2 cacheline header that is used
+ * to manage the queue.
+ *
+ *  Input:
+ * 	p	pointer to user allocated memory.
+ * 	bytes	size of message queue in bytes
+ *
+ *  Errors:
+ *  	0	OK
+ *  	>0	error
+ */
+extern int gru_create_message_queue(void *p, unsigned int bytes);
+
+/*
+ * Send a message to a message queue.
+ *
+ * Note: The message queue transport mechanism uses the first 32
+ * bits of the message. Users should avoid using these bits.
+ *
+ *
+ *   Input:
+ * 	xmq	message queue - must be a UV global physical address
+ * 	mesg	pointer to message. Must be 64-bit aligned
+ * 	bytes	size of message in bytes
+ *
+ *   Output:
+ *      0	message sent
+ *     >0	Send failure - see error codes below
+ *
+ */
+extern int gru_send_message_gpa(unsigned long mq_gpa, void *mesg,
+						unsigned int bytes);
+
+/* Status values for gru_send_message() */
+#define MQE_OK			0	/* message sent successfully */
+#define MQE_CONGESTION		1	/* temporary congestion, try again */
+#define MQE_QUEUE_FULL		2	/* queue is full */
+#define MQE_UNEXPECTED_CB_ERR	3	/* unexpected CB error */
+#define MQE_PAGE_OVERFLOW	10	/* BUG - queue overflowed a page */
+#define MQE_BUG_NO_RESOURCES	11	/* BUG - could not alloc GRU cb/dsr */
+
+/*
+ * Advance the receive pointer for the message queue to the next message.
+ * Note: current API requires messages to be gotten & freed in order. Future
+ * API extensions may allow for out-of-order freeing.
+ *
+ *   Input
+ * 	mq	message queue
+ * 	mesq	message being freed
+ */
+extern void gru_free_message(void *mq, void *mesq);
+
+/*
+ * Get next message from message queue. Returns pointer to
+ * message OR NULL if no message present.
+ * User must call gru_free_message() after message is processed
+ * in order to move the queue pointers to next message.
+ *
+ *   Input
+ * 	mq	message queue
+ *
+ *   Output:
+ *	p	pointer to message
+ *	NULL	no message available
+ */
+extern void *gru_get_next_message(void *mq);
+
+
+/*
+ * Copy data using the GRU. Source or destination can be located in a remote
+ * partition.
+ *
+ *    Input:
+ *    	dest_gpa	destination global physical address
+ *    	src_gpa		source global physical address
+ *    	bytes		number of bytes to copy
+ *
+ *    Output:
+ *	0		OK
+ *	>0		error
+ */
+extern int gru_copy_gpa(unsigned long dest_gpa, unsigned long src_gpa,
+							unsigned int bytes);
+
+#endif 		/* __GRU_KSERVICES_H_ */
diff --git a/drivers/misc/sgi-gru/grulib.h b/drivers/misc/sgi-gru/grulib.h
new file mode 100644
index 000000000000..e56e196a6998
--- /dev/null
+++ b/drivers/misc/sgi-gru/grulib.h
@@ -0,0 +1,97 @@
+/*
+ *  Copyright (c) 2008 Silicon Graphics, Inc.  All Rights Reserved.
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU Lesser General Public License as published by
+ *  the Free Software Foundation; either version 2.1 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU Lesser General Public License for more details.
+ *
+ *  You should have received a copy of the GNU Lesser General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+
+#ifndef __GRULIB_H__
+#define __GRULIB_H__
+
+#define GRU_BASENAME		"gru"
+#define GRU_FULLNAME		"/dev/gru"
+#define GRU_IOCTL_NUM 		 'G'
+
+/*
+ * Maximum number of GRU segments that a user can have open
+ * ZZZ temp - set high for testing. Revisit.
+ */
+#define GRU_MAX_OPEN_CONTEXTS		32
+
+/* Set Number of Request Blocks */
+#define GRU_CREATE_CONTEXT		_IOWR(GRU_IOCTL_NUM, 1, void *)
+
+/* Register task as using the slice */
+#define GRU_SET_TASK_SLICE		_IOWR(GRU_IOCTL_NUM, 5, void *)
+
+/* Fetch exception detail */
+#define GRU_USER_GET_EXCEPTION_DETAIL	_IOWR(GRU_IOCTL_NUM, 6, void *)
+
+/* For user call_os handling - normally a TLB fault */
+#define GRU_USER_CALL_OS		_IOWR(GRU_IOCTL_NUM, 8, void *)
+
+/* For user unload context */
+#define GRU_USER_UNLOAD_CONTEXT		_IOWR(GRU_IOCTL_NUM, 9, void *)
+
+/* For fetching GRU chiplet status */
+#define GRU_GET_CHIPLET_STATUS		_IOWR(GRU_IOCTL_NUM, 10, void *)
+
+/* For user TLB flushing (primarily for tests) */
+#define GRU_USER_FLUSH_TLB		_IOWR(GRU_IOCTL_NUM, 50, void *)
+
+/* Get some config options (primarily for tests & emulator) */
+#define GRU_GET_CONFIG_INFO		_IOWR(GRU_IOCTL_NUM, 51, void *)
+
+#define CONTEXT_WINDOW_BYTES(th)        (GRU_GSEG_PAGESIZE * (th))
+#define THREAD_POINTER(p, th)		(p + GRU_GSEG_PAGESIZE * (th))
+
+/*
+ * Structure used to pass TLB flush parameters to the driver
+ */
+struct gru_create_context_req {
+	unsigned long		gseg;
+	unsigned int		data_segment_bytes;
+	unsigned int		control_blocks;
+	unsigned int		maximum_thread_count;
+	unsigned int		options;
+};
+
+/*
+ * Structure used to pass unload context parameters to the driver
+ */
+struct gru_unload_context_req {
+	unsigned long	gseg;
+};
+
+/*
+ * Structure used to pass TLB flush parameters to the driver
+ */
+struct gru_flush_tlb_req {
+	unsigned long	gseg;
+	unsigned long	vaddr;
+	size_t		len;
+};
+
+/*
+ * GRU configuration info (temp - for testing)
+ */
+struct gru_config_info {
+	int		cpus;
+	int		blades;
+	int		nodes;
+	int		chiplets;
+	int		fill[16];
+};
+
+#endif /* __GRULIB_H__ */
diff --git a/drivers/misc/sgi-gru/grumain.c b/drivers/misc/sgi-gru/grumain.c
new file mode 100644
index 000000000000..0eeb8dddd2f5
--- /dev/null
+++ b/drivers/misc/sgi-gru/grumain.c
@@ -0,0 +1,802 @@
+/*
+ * SN Platform GRU Driver
+ *
+ *            DRIVER TABLE MANAGER + GRU CONTEXT LOAD/UNLOAD
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (c) 2008 Silicon Graphics, Inc.  All Rights Reserved.
+ */
+
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/mm.h>
+#include <linux/spinlock.h>
+#include <linux/sched.h>
+#include <linux/device.h>
+#include <linux/list.h>
+#include <asm/uv/uv_hub.h>
+#include "gru.h"
+#include "grutables.h"
+#include "gruhandles.h"
+
+unsigned long gru_options __read_mostly;
+
+static struct device_driver gru_driver = {
+	.name = "gru"
+};
+
+static struct device gru_device = {
+	.bus_id = {0},
+	.driver = &gru_driver,
+};
+
+struct device *grudev = &gru_device;
+
+/*
+ * Select a gru fault map to be used by the current cpu. Note that
+ * multiple cpus may be using the same map.
+ *	ZZZ should "shift" be used?? Depends on HT cpu numbering
+ *	ZZZ should be inline but did not work on emulator
+ */
+int gru_cpu_fault_map_id(void)
+{
+	return uv_blade_processor_id() % GRU_NUM_TFM;
+}
+
+/*--------- ASID Management -------------------------------------------
+ *
+ *  Initially, assign asids sequentially from MIN_ASID .. MAX_ASID.
+ *  Once MAX is reached, flush the TLB & start over. However,
+ *  some asids may still be in use. There won't be many (percentage wise) still
+ *  in use. Search active contexts & determine the value of the first
+ *  asid in use ("x"s below). Set "limit" to this value.
+ *  This defines a block of assignable asids.
+ *
+ *  When "limit" is reached, search forward from limit+1 and determine the
+ *  next block of assignable asids.
+ *
+ *  Repeat until MAX_ASID is reached, then start over again.
+ *
+ *  Each time MAX_ASID is reached, increment the asid generation. Since
+ *  the search for in-use asids only checks contexts with GRUs currently
+ *  assigned, asids in some contexts will be missed. Prior to loading
+ *  a context, the asid generation of the GTS asid is rechecked. If it
+ *  doesn't match the current generation, a new asid will be assigned.
+ *
+ *   	0---------------x------------x---------------------x----|
+ *	  ^-next	^-limit	   				^-MAX_ASID
+ *
+ * All asid manipulation & context loading/unloading is protected by the
+ * gs_lock.
+ */
+
+/* Hit the asid limit. Start over */
+static int gru_wrap_asid(struct gru_state *gru)
+{
+	gru_dbg(grudev, "gru %p\n", gru);
+	STAT(asid_wrap);
+	gru->gs_asid_gen++;
+	gru_flush_all_tlb(gru);
+	return MIN_ASID;
+}
+
+/* Find the next chunk of unused asids */
+static int gru_reset_asid_limit(struct gru_state *gru, int asid)
+{
+	int i, gid, inuse_asid, limit;
+
+	gru_dbg(grudev, "gru %p, asid 0x%x\n", gru, asid);
+	STAT(asid_next);
+	limit = MAX_ASID;
+	if (asid >= limit)
+		asid = gru_wrap_asid(gru);
+	gid = gru->gs_gid;
+again:
+	for (i = 0; i < GRU_NUM_CCH; i++) {
+		if (!gru->gs_gts[i])
+			continue;
+		inuse_asid = gru->gs_gts[i]->ts_gms->ms_asids[gid].mt_asid;
+		gru_dbg(grudev, "gru %p, inuse_asid 0x%x, cxtnum %d, gts %p\n",
+			gru, inuse_asid, i, gru->gs_gts[i]);
+		if (inuse_asid == asid) {
+			asid += ASID_INC;
+			if (asid >= limit) {
+				/*
+				 * empty range: reset the range limit and
+				 * start over
+				 */
+				limit = MAX_ASID;
+				if (asid >= MAX_ASID)
+					asid = gru_wrap_asid(gru);
+				goto again;
+			}
+		}
+
+		if ((inuse_asid > asid) && (inuse_asid < limit))
+			limit = inuse_asid;
+	}
+	gru->gs_asid_limit = limit;
+	gru->gs_asid = asid;
+	gru_dbg(grudev, "gru %p, new asid 0x%x, new_limit 0x%x\n", gru, asid,
+		limit);
+	return asid;
+}
+
+/* Assign a new ASID to a thread context.  */
+static int gru_assign_asid(struct gru_state *gru)
+{
+	int asid;
+
+	spin_lock(&gru->gs_asid_lock);
+	gru->gs_asid += ASID_INC;
+	asid = gru->gs_asid;
+	if (asid >= gru->gs_asid_limit)
+		asid = gru_reset_asid_limit(gru, asid);
+	spin_unlock(&gru->gs_asid_lock);
+
+	gru_dbg(grudev, "gru %p, asid 0x%x\n", gru, asid);
+	return asid;
+}
+
+/*
+ * Clear n bits in a word. Return a word indicating the bits that were cleared.
+ * Optionally, build an array of chars that contain the bit numbers allocated.
+ */
+static unsigned long reserve_resources(unsigned long *p, int n, int mmax,
+				       char *idx)
+{
+	unsigned long bits = 0;
+	int i;
+
+	do {
+		i = find_first_bit(p, mmax);
+		if (i == mmax)
+			BUG();
+		__clear_bit(i, p);
+		__set_bit(i, &bits);
+		if (idx)
+			*idx++ = i;
+	} while (--n);
+	return bits;
+}
+
+unsigned long gru_reserve_cb_resources(struct gru_state *gru, int cbr_au_count,
+				       char *cbmap)
+{
+	return reserve_resources(&gru->gs_cbr_map, cbr_au_count, GRU_CBR_AU,
+				 cbmap);
+}
+
+unsigned long gru_reserve_ds_resources(struct gru_state *gru, int dsr_au_count,
+				       char *dsmap)
+{
+	return reserve_resources(&gru->gs_dsr_map, dsr_au_count, GRU_DSR_AU,
+				 dsmap);
+}
+
+static void reserve_gru_resources(struct gru_state *gru,
+				  struct gru_thread_state *gts)
+{
+	gru->gs_active_contexts++;
+	gts->ts_cbr_map =
+	    gru_reserve_cb_resources(gru, gts->ts_cbr_au_count,
+				     gts->ts_cbr_idx);
+	gts->ts_dsr_map =
+	    gru_reserve_ds_resources(gru, gts->ts_dsr_au_count, NULL);
+}
+
+static void free_gru_resources(struct gru_state *gru,
+			       struct gru_thread_state *gts)
+{
+	gru->gs_active_contexts--;
+	gru->gs_cbr_map |= gts->ts_cbr_map;
+	gru->gs_dsr_map |= gts->ts_dsr_map;
+}
+
+/*
+ * Check if a GRU has sufficient free resources to satisfy an allocation
+ * request. Note: GRU locks may or may not be held when this is called. If
+ * not held, recheck after acquiring the appropriate locks.
+ *
+ * Returns 1 if sufficient resources, 0 if not
+ */
+static int check_gru_resources(struct gru_state *gru, int cbr_au_count,
+			       int dsr_au_count, int max_active_contexts)
+{
+	return hweight64(gru->gs_cbr_map) >= cbr_au_count
+		&& hweight64(gru->gs_dsr_map) >= dsr_au_count
+		&& gru->gs_active_contexts < max_active_contexts;
+}
+
+/*
+ * TLB manangment requires tracking all GRU chiplets that have loaded a GSEG
+ * context.
+ */
+static int gru_load_mm_tracker(struct gru_state *gru, struct gru_mm_struct *gms,
+			       int ctxnum)
+{
+	struct gru_mm_tracker *asids = &gms->ms_asids[gru->gs_gid];
+	unsigned short ctxbitmap = (1 << ctxnum);
+	int asid;
+
+	spin_lock(&gms->ms_asid_lock);
+	asid = asids->mt_asid;
+
+	if (asid == 0 || asids->mt_asid_gen != gru->gs_asid_gen) {
+		asid = gru_assign_asid(gru);
+		asids->mt_asid = asid;
+		asids->mt_asid_gen = gru->gs_asid_gen;
+		STAT(asid_new);
+	} else {
+		STAT(asid_reuse);
+	}
+
+	BUG_ON(asids->mt_ctxbitmap & ctxbitmap);
+	asids->mt_ctxbitmap |= ctxbitmap;
+	if (!test_bit(gru->gs_gid, gms->ms_asidmap))
+		__set_bit(gru->gs_gid, gms->ms_asidmap);
+	spin_unlock(&gms->ms_asid_lock);
+
+	gru_dbg(grudev,
+		"gru %x, gms %p, ctxnum 0x%d, asid 0x%x, asidmap 0x%lx\n",
+		gru->gs_gid, gms, ctxnum, asid, gms->ms_asidmap[0]);
+	return asid;
+}
+
+static void gru_unload_mm_tracker(struct gru_state *gru,
+				  struct gru_mm_struct *gms, int ctxnum)
+{
+	struct gru_mm_tracker *asids;
+	unsigned short ctxbitmap;
+
+	asids = &gms->ms_asids[gru->gs_gid];
+	ctxbitmap = (1 << ctxnum);
+	spin_lock(&gms->ms_asid_lock);
+	BUG_ON((asids->mt_ctxbitmap & ctxbitmap) != ctxbitmap);
+	asids->mt_ctxbitmap ^= ctxbitmap;
+	gru_dbg(grudev, "gru %x, gms %p, ctxnum 0x%d, asidmap 0x%lx\n",
+		gru->gs_gid, gms, ctxnum, gms->ms_asidmap[0]);
+	spin_unlock(&gms->ms_asid_lock);
+}
+
+/*
+ * Decrement the reference count on a GTS structure. Free the structure
+ * if the reference count goes to zero.
+ */
+void gts_drop(struct gru_thread_state *gts)
+{
+	if (gts && atomic_dec_return(&gts->ts_refcnt) == 0) {
+		gru_drop_mmu_notifier(gts->ts_gms);
+		kfree(gts);
+		STAT(gts_free);
+	}
+}
+
+/*
+ * Locate the GTS structure for the current thread.
+ */
+static struct gru_thread_state *gru_find_current_gts_nolock(struct gru_vma_data
+			    *vdata, int tsid)
+{
+	struct gru_thread_state *gts;
+
+	list_for_each_entry(gts, &vdata->vd_head, ts_next)
+	    if (gts->ts_tsid == tsid)
+		return gts;
+	return NULL;
+}
+
+/*
+ * Allocate a thread state structure.
+ */
+static struct gru_thread_state *gru_alloc_gts(struct vm_area_struct *vma,
+					      struct gru_vma_data *vdata,
+					      int tsid)
+{
+	struct gru_thread_state *gts;
+	int bytes;
+
+	bytes = DSR_BYTES(vdata->vd_dsr_au_count) +
+				CBR_BYTES(vdata->vd_cbr_au_count);
+	bytes += sizeof(struct gru_thread_state);
+	gts = kzalloc(bytes, GFP_KERNEL);
+	if (!gts)
+		return NULL;
+
+	STAT(gts_alloc);
+	atomic_set(&gts->ts_refcnt, 1);
+	mutex_init(&gts->ts_ctxlock);
+	gts->ts_cbr_au_count = vdata->vd_cbr_au_count;
+	gts->ts_dsr_au_count = vdata->vd_dsr_au_count;
+	gts->ts_user_options = vdata->vd_user_options;
+	gts->ts_tsid = tsid;
+	gts->ts_user_options = vdata->vd_user_options;
+	gts->ts_ctxnum = NULLCTX;
+	gts->ts_mm = current->mm;
+	gts->ts_vma = vma;
+	gts->ts_tlb_int_select = -1;
+	gts->ts_gms = gru_register_mmu_notifier();
+	if (!gts->ts_gms)
+		goto err;
+
+	gru_dbg(grudev, "alloc vdata %p, new gts %p\n", vdata, gts);
+	return gts;
+
+err:
+	gts_drop(gts);
+	return NULL;
+}
+
+/*
+ * Allocate a vma private data structure.
+ */
+struct gru_vma_data *gru_alloc_vma_data(struct vm_area_struct *vma, int tsid)
+{
+	struct gru_vma_data *vdata = NULL;
+
+	vdata = kmalloc(sizeof(*vdata), GFP_KERNEL);
+	if (!vdata)
+		return NULL;
+
+	INIT_LIST_HEAD(&vdata->vd_head);
+	spin_lock_init(&vdata->vd_lock);
+	gru_dbg(grudev, "alloc vdata %p\n", vdata);
+	return vdata;
+}
+
+/*
+ * Find the thread state structure for the current thread.
+ */
+struct gru_thread_state *gru_find_thread_state(struct vm_area_struct *vma,
+					int tsid)
+{
+	struct gru_vma_data *vdata = vma->vm_private_data;
+	struct gru_thread_state *gts;
+
+	spin_lock(&vdata->vd_lock);
+	gts = gru_find_current_gts_nolock(vdata, tsid);
+	spin_unlock(&vdata->vd_lock);
+	gru_dbg(grudev, "vma %p, gts %p\n", vma, gts);
+	return gts;
+}
+
+/*
+ * Allocate a new thread state for a GSEG. Note that races may allow
+ * another thread to race to create a gts.
+ */
+struct gru_thread_state *gru_alloc_thread_state(struct vm_area_struct *vma,
+					int tsid)
+{
+	struct gru_vma_data *vdata = vma->vm_private_data;
+	struct gru_thread_state *gts, *ngts;
+
+	gts = gru_alloc_gts(vma, vdata, tsid);
+	if (!gts)
+		return NULL;
+
+	spin_lock(&vdata->vd_lock);
+	ngts = gru_find_current_gts_nolock(vdata, tsid);
+	if (ngts) {
+		gts_drop(gts);
+		gts = ngts;
+		STAT(gts_double_allocate);
+	} else {
+		list_add(&gts->ts_next, &vdata->vd_head);
+	}
+	spin_unlock(&vdata->vd_lock);
+	gru_dbg(grudev, "vma %p, gts %p\n", vma, gts);
+	return gts;
+}
+
+/*
+ * Free the GRU context assigned to the thread state.
+ */
+static void gru_free_gru_context(struct gru_thread_state *gts)
+{
+	struct gru_state *gru;
+
+	gru = gts->ts_gru;
+	gru_dbg(grudev, "gts %p, gru %p\n", gts, gru);
+
+	spin_lock(&gru->gs_lock);
+	gru->gs_gts[gts->ts_ctxnum] = NULL;
+	free_gru_resources(gru, gts);
+	BUG_ON(test_bit(gts->ts_ctxnum, &gru->gs_context_map) == 0);
+	__clear_bit(gts->ts_ctxnum, &gru->gs_context_map);
+	gts->ts_ctxnum = NULLCTX;
+	gts->ts_gru = NULL;
+	spin_unlock(&gru->gs_lock);
+
+	gts_drop(gts);
+	STAT(free_context);
+}
+
+/*
+ * Prefetching cachelines help hardware performance.
+ * (Strictly a performance enhancement. Not functionally required).
+ */
+static void prefetch_data(void *p, int num, int stride)
+{
+	while (num-- > 0) {
+		prefetchw(p);
+		p += stride;
+	}
+}
+
+static inline long gru_copy_handle(void *d, void *s)
+{
+	memcpy(d, s, GRU_HANDLE_BYTES);
+	return GRU_HANDLE_BYTES;
+}
+
+/* rewrite in assembly & use lots of prefetch */
+static void gru_load_context_data(void *save, void *grubase, int ctxnum,
+				  unsigned long cbrmap, unsigned long dsrmap)
+{
+	void *gseg, *cb, *cbe;
+	unsigned long length;
+	int i, scr;
+
+	gseg = grubase + ctxnum * GRU_GSEG_STRIDE;
+	length = hweight64(dsrmap) * GRU_DSR_AU_BYTES;
+	prefetch_data(gseg + GRU_DS_BASE, length / GRU_CACHE_LINE_BYTES,
+		      GRU_CACHE_LINE_BYTES);
+
+	cb = gseg + GRU_CB_BASE;
+	cbe = grubase + GRU_CBE_BASE;
+	for_each_cbr_in_allocation_map(i, &cbrmap, scr) {
+		prefetch_data(cb, 1, GRU_CACHE_LINE_BYTES);
+		prefetch_data(cbe + i * GRU_HANDLE_STRIDE, 1,
+			      GRU_CACHE_LINE_BYTES);
+		cb += GRU_HANDLE_STRIDE;
+	}
+
+	cb = gseg + GRU_CB_BASE;
+	for_each_cbr_in_allocation_map(i, &cbrmap, scr) {
+		save += gru_copy_handle(cb, save);
+		save += gru_copy_handle(cbe + i * GRU_HANDLE_STRIDE, save);
+		cb += GRU_HANDLE_STRIDE;
+	}
+
+	memcpy(gseg + GRU_DS_BASE, save, length);
+}
+
+static void gru_unload_context_data(void *save, void *grubase, int ctxnum,
+				    unsigned long cbrmap, unsigned long dsrmap)
+{
+	void *gseg, *cb, *cbe;
+	unsigned long length;
+	int i, scr;
+
+	gseg = grubase + ctxnum * GRU_GSEG_STRIDE;
+
+	cb = gseg + GRU_CB_BASE;
+	cbe = grubase + GRU_CBE_BASE;
+	for_each_cbr_in_allocation_map(i, &cbrmap, scr) {
+		save += gru_copy_handle(save, cb);
+		save += gru_copy_handle(save, cbe + i * GRU_HANDLE_STRIDE);
+		cb += GRU_HANDLE_STRIDE;
+	}
+	length = hweight64(dsrmap) * GRU_DSR_AU_BYTES;
+	memcpy(save, gseg + GRU_DS_BASE, length);
+}
+
+void gru_unload_context(struct gru_thread_state *gts, int savestate)
+{
+	struct gru_state *gru = gts->ts_gru;
+	struct gru_context_configuration_handle *cch;
+	int ctxnum = gts->ts_ctxnum;
+
+	zap_vma_ptes(gts->ts_vma, UGRUADDR(gts), GRU_GSEG_PAGESIZE);
+	cch = get_cch(gru->gs_gru_base_vaddr, ctxnum);
+
+	lock_cch_handle(cch);
+	if (cch_interrupt_sync(cch))
+		BUG();
+	gru_dbg(grudev, "gts %p\n", gts);
+
+	gru_unload_mm_tracker(gru, gts->ts_gms, gts->ts_ctxnum);
+	if (savestate)
+		gru_unload_context_data(gts->ts_gdata, gru->gs_gru_base_vaddr,
+					ctxnum, gts->ts_cbr_map,
+					gts->ts_dsr_map);
+
+	if (cch_deallocate(cch))
+		BUG();
+	gts->ts_force_unload = 0;	/* ts_force_unload locked by CCH lock */
+	unlock_cch_handle(cch);
+
+	gru_free_gru_context(gts);
+	STAT(unload_context);
+}
+
+/*
+ * Load a GRU context by copying it from the thread data structure in memory
+ * to the GRU.
+ */
+static void gru_load_context(struct gru_thread_state *gts)
+{
+	struct gru_state *gru = gts->ts_gru;
+	struct gru_context_configuration_handle *cch;
+	int err, asid, ctxnum = gts->ts_ctxnum;
+
+	gru_dbg(grudev, "gts %p\n", gts);
+	cch = get_cch(gru->gs_gru_base_vaddr, ctxnum);
+
+	lock_cch_handle(cch);
+	asid = gru_load_mm_tracker(gru, gts->ts_gms, gts->ts_ctxnum);
+	cch->tfm_fault_bit_enable =
+	    (gts->ts_user_options == GRU_OPT_MISS_FMM_POLL
+	     || gts->ts_user_options == GRU_OPT_MISS_FMM_INTR);
+	cch->tlb_int_enable = (gts->ts_user_options == GRU_OPT_MISS_FMM_INTR);
+	if (cch->tlb_int_enable) {
+		gts->ts_tlb_int_select = gru_cpu_fault_map_id();
+		cch->tlb_int_select = gts->ts_tlb_int_select;
+	}
+	cch->tfm_done_bit_enable = 0;
+	err = cch_allocate(cch, asid, gts->ts_cbr_map, gts->ts_dsr_map);
+	if (err) {
+		gru_dbg(grudev,
+			"err %d: cch %p, gts %p, cbr 0x%lx, dsr 0x%lx\n",
+			err, cch, gts, gts->ts_cbr_map, gts->ts_dsr_map);
+		BUG();
+	}
+
+	gru_load_context_data(gts->ts_gdata, gru->gs_gru_base_vaddr, ctxnum,
+			      gts->ts_cbr_map, gts->ts_dsr_map);
+
+	if (cch_start(cch))
+		BUG();
+	unlock_cch_handle(cch);
+
+	STAT(load_context);
+}
+
+/*
+ * Update fields in an active CCH:
+ * 	- retarget interrupts on local blade
+ * 	- force a delayed context unload by clearing the CCH asids. This
+ * 	  forces TLB misses for new GRU instructions. The context is unloaded
+ * 	  when the next TLB miss occurs.
+ */
+static int gru_update_cch(struct gru_thread_state *gts, int int_select)
+{
+	struct gru_context_configuration_handle *cch;
+	struct gru_state *gru = gts->ts_gru;
+	int i, ctxnum = gts->ts_ctxnum, ret = 0;
+
+	cch = get_cch(gru->gs_gru_base_vaddr, ctxnum);
+
+	lock_cch_handle(cch);
+	if (cch->state == CCHSTATE_ACTIVE) {
+		if (gru->gs_gts[gts->ts_ctxnum] != gts)
+			goto exit;
+		if (cch_interrupt(cch))
+			BUG();
+		if (int_select >= 0) {
+			gts->ts_tlb_int_select = int_select;
+			cch->tlb_int_select = int_select;
+		} else {
+			for (i = 0; i < 8; i++)
+				cch->asid[i] = 0;
+			cch->tfm_fault_bit_enable = 0;
+			cch->tlb_int_enable = 0;
+			gts->ts_force_unload = 1;
+		}
+		if (cch_start(cch))
+			BUG();
+		ret = 1;
+	}
+exit:
+	unlock_cch_handle(cch);
+	return ret;
+}
+
+/*
+ * Update CCH tlb interrupt select. Required when all the following is true:
+ * 	- task's GRU context is loaded into a GRU
+ * 	- task is using interrupt notification for TLB faults
+ * 	- task has migrated to a different cpu on the same blade where
+ * 	  it was previously running.
+ */
+static int gru_retarget_intr(struct gru_thread_state *gts)
+{
+	if (gts->ts_tlb_int_select < 0
+	    || gts->ts_tlb_int_select == gru_cpu_fault_map_id())
+		return 0;
+
+	gru_dbg(grudev, "retarget from %d to %d\n", gts->ts_tlb_int_select,
+		gru_cpu_fault_map_id());
+	return gru_update_cch(gts, gru_cpu_fault_map_id());
+}
+
+
+/*
+ * Insufficient GRU resources available on the local blade. Steal a context from
+ * a process. This is a hack until a _real_ resource scheduler is written....
+ */
+#define next_ctxnum(n)	((n) <  GRU_NUM_CCH - 2 ? (n) + 1 : 0)
+#define next_gru(b, g)	(((g) < &(b)->bs_grus[GRU_CHIPLETS_PER_BLADE - 1]) ?  \
+				 ((g)+1) : &(b)->bs_grus[0])
+
+static void gru_steal_context(struct gru_thread_state *gts)
+{
+	struct gru_blade_state *blade;
+	struct gru_state *gru, *gru0;
+	struct gru_thread_state *ngts = NULL;
+	int ctxnum, ctxnum0, flag = 0, cbr, dsr;
+
+	cbr = gts->ts_cbr_au_count;
+	dsr = gts->ts_dsr_au_count;
+
+	preempt_disable();
+	blade = gru_base[uv_numa_blade_id()];
+	spin_lock(&blade->bs_lock);
+
+	ctxnum = next_ctxnum(blade->bs_lru_ctxnum);
+	gru = blade->bs_lru_gru;
+	if (ctxnum == 0)
+		gru = next_gru(blade, gru);
+	ctxnum0 = ctxnum;
+	gru0 = gru;
+	while (1) {
+		if (check_gru_resources(gru, cbr, dsr, GRU_NUM_CCH))
+			break;
+		spin_lock(&gru->gs_lock);
+		for (; ctxnum < GRU_NUM_CCH; ctxnum++) {
+			if (flag && gru == gru0 && ctxnum == ctxnum0)
+				break;
+			ngts = gru->gs_gts[ctxnum];
+			/*
+			 * We are grabbing locks out of order, so trylock is
+			 * needed. GTSs are usually not locked, so the odds of
+			 * success are high. If trylock fails, try to steal a
+			 * different GSEG.
+			 */
+			if (ngts && mutex_trylock(&ngts->ts_ctxlock))
+				break;
+			ngts = NULL;
+			flag = 1;
+		}
+		spin_unlock(&gru->gs_lock);
+		if (ngts || (flag && gru == gru0 && ctxnum == ctxnum0))
+			break;
+		ctxnum = 0;
+		gru = next_gru(blade, gru);
+	}
+	blade->bs_lru_gru = gru;
+	blade->bs_lru_ctxnum = ctxnum;
+	spin_unlock(&blade->bs_lock);
+	preempt_enable();
+
+	if (ngts) {
+		STAT(steal_context);
+		ngts->ts_steal_jiffies = jiffies;
+		gru_unload_context(ngts, 1);
+		mutex_unlock(&ngts->ts_ctxlock);
+	} else {
+		STAT(steal_context_failed);
+	}
+	gru_dbg(grudev,
+		"stole gru %x, ctxnum %d from gts %p. Need cb %d, ds %d;"
+		" avail cb %ld, ds %ld\n",
+		gru->gs_gid, ctxnum, ngts, cbr, dsr, hweight64(gru->gs_cbr_map),
+		hweight64(gru->gs_dsr_map));
+}
+
+/*
+ * Scan the GRUs on the local blade & assign a GRU context.
+ */
+static struct gru_state *gru_assign_gru_context(struct gru_thread_state *gts)
+{
+	struct gru_state *gru, *grux;
+	int i, max_active_contexts;
+
+	preempt_disable();
+
+again:
+	gru = NULL;
+	max_active_contexts = GRU_NUM_CCH;
+	for_each_gru_on_blade(grux, uv_numa_blade_id(), i) {
+		if (check_gru_resources(grux, gts->ts_cbr_au_count,
+					gts->ts_dsr_au_count,
+					max_active_contexts)) {
+			gru = grux;
+			max_active_contexts = grux->gs_active_contexts;
+			if (max_active_contexts == 0)
+				break;
+		}
+	}
+
+	if (gru) {
+		spin_lock(&gru->gs_lock);
+		if (!check_gru_resources(gru, gts->ts_cbr_au_count,
+					 gts->ts_dsr_au_count, GRU_NUM_CCH)) {
+			spin_unlock(&gru->gs_lock);
+			goto again;
+		}
+		reserve_gru_resources(gru, gts);
+		gts->ts_gru = gru;
+		gts->ts_ctxnum =
+		    find_first_zero_bit(&gru->gs_context_map, GRU_NUM_CCH);
+		BUG_ON(gts->ts_ctxnum == GRU_NUM_CCH);
+		atomic_inc(&gts->ts_refcnt);
+		gru->gs_gts[gts->ts_ctxnum] = gts;
+		__set_bit(gts->ts_ctxnum, &gru->gs_context_map);
+		spin_unlock(&gru->gs_lock);
+
+		STAT(assign_context);
+		gru_dbg(grudev,
+			"gseg %p, gts %p, gru %x, ctx %d, cbr %d, dsr %d\n",
+			gseg_virtual_address(gts->ts_gru, gts->ts_ctxnum), gts,
+			gts->ts_gru->gs_gid, gts->ts_ctxnum,
+			gts->ts_cbr_au_count, gts->ts_dsr_au_count);
+	} else {
+		gru_dbg(grudev, "failed to allocate a GTS %s\n", "");
+		STAT(assign_context_failed);
+	}
+
+	preempt_enable();
+	return gru;
+}
+
+/*
+ * gru_nopage
+ *
+ * Map the user's GRU segment
+ *
+ * 	Note: gru segments alway mmaped on GRU_GSEG_PAGESIZE boundaries.
+ */
+int gru_fault(struct vm_area_struct *vma, struct vm_fault *vmf)
+{
+	struct gru_thread_state *gts;
+	unsigned long paddr, vaddr;
+
+	vaddr = (unsigned long)vmf->virtual_address;
+	gru_dbg(grudev, "vma %p, vaddr 0x%lx (0x%lx)\n",
+		vma, vaddr, GSEG_BASE(vaddr));
+	STAT(nopfn);
+
+	/* The following check ensures vaddr is a valid address in the VMA */
+	gts = gru_find_thread_state(vma, TSID(vaddr, vma));
+	if (!gts)
+		return VM_FAULT_SIGBUS;
+
+again:
+	preempt_disable();
+	mutex_lock(&gts->ts_ctxlock);
+	if (gts->ts_gru) {
+		if (gts->ts_gru->gs_blade_id != uv_numa_blade_id()) {
+			STAT(migrated_nopfn_unload);
+			gru_unload_context(gts, 1);
+		} else {
+			if (gru_retarget_intr(gts))
+				STAT(migrated_nopfn_retarget);
+		}
+	}
+
+	if (!gts->ts_gru) {
+		if (!gru_assign_gru_context(gts)) {
+			mutex_unlock(&gts->ts_ctxlock);
+			preempt_enable();
+			schedule_timeout(GRU_ASSIGN_DELAY);  /* true hack ZZZ */
+			if (gts->ts_steal_jiffies + GRU_STEAL_DELAY < jiffies)
+				gru_steal_context(gts);
+			goto again;
+		}
+		gru_load_context(gts);
+		paddr = gseg_physical_address(gts->ts_gru, gts->ts_ctxnum);
+		remap_pfn_range(vma, vaddr & ~(GRU_GSEG_PAGESIZE - 1),
+				paddr >> PAGE_SHIFT, GRU_GSEG_PAGESIZE,
+				vma->vm_page_prot);
+	}
+
+	mutex_unlock(&gts->ts_ctxlock);
+	preempt_enable();
+
+	return VM_FAULT_NOPAGE;
+}
+
diff --git a/drivers/misc/sgi-gru/gruprocfs.c b/drivers/misc/sgi-gru/gruprocfs.c
new file mode 100644
index 000000000000..533923f83f1a
--- /dev/null
+++ b/drivers/misc/sgi-gru/gruprocfs.c
@@ -0,0 +1,336 @@
+/*
+ * SN Platform GRU Driver
+ *
+ *              PROC INTERFACES
+ *
+ * This file supports the /proc interfaces for the GRU driver
+ *
+ *  Copyright (c) 2008 Silicon Graphics, Inc.  All Rights Reserved.
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+
+#include <linux/proc_fs.h>
+#include <linux/device.h>
+#include <linux/seq_file.h>
+#include <linux/uaccess.h>
+#include "gru.h"
+#include "grulib.h"
+#include "grutables.h"
+
+#define printstat(s, f)		printstat_val(s, &gru_stats.f, #f)
+
+static void printstat_val(struct seq_file *s, atomic_long_t *v, char *id)
+{
+	unsigned long val = atomic_long_read(v);
+
+	if (val)
+		seq_printf(s, "%16lu %s\n", val, id);
+}
+
+static int statistics_show(struct seq_file *s, void *p)
+{
+	printstat(s, vdata_alloc);
+	printstat(s, vdata_free);
+	printstat(s, gts_alloc);
+	printstat(s, gts_free);
+	printstat(s, vdata_double_alloc);
+	printstat(s, gts_double_allocate);
+	printstat(s, assign_context);
+	printstat(s, assign_context_failed);
+	printstat(s, free_context);
+	printstat(s, load_context);
+	printstat(s, unload_context);
+	printstat(s, steal_context);
+	printstat(s, steal_context_failed);
+	printstat(s, nopfn);
+	printstat(s, break_cow);
+	printstat(s, asid_new);
+	printstat(s, asid_next);
+	printstat(s, asid_wrap);
+	printstat(s, asid_reuse);
+	printstat(s, intr);
+	printstat(s, call_os);
+	printstat(s, call_os_check_for_bug);
+	printstat(s, call_os_wait_queue);
+	printstat(s, user_flush_tlb);
+	printstat(s, user_unload_context);
+	printstat(s, user_exception);
+	printstat(s, set_task_slice);
+	printstat(s, migrate_check);
+	printstat(s, migrated_retarget);
+	printstat(s, migrated_unload);
+	printstat(s, migrated_unload_delay);
+	printstat(s, migrated_nopfn_retarget);
+	printstat(s, migrated_nopfn_unload);
+	printstat(s, tlb_dropin);
+	printstat(s, tlb_dropin_fail_no_asid);
+	printstat(s, tlb_dropin_fail_upm);
+	printstat(s, tlb_dropin_fail_invalid);
+	printstat(s, tlb_dropin_fail_range_active);
+	printstat(s, tlb_dropin_fail_idle);
+	printstat(s, tlb_dropin_fail_fmm);
+	printstat(s, mmu_invalidate_range);
+	printstat(s, mmu_invalidate_page);
+	printstat(s, mmu_clear_flush_young);
+	printstat(s, flush_tlb);
+	printstat(s, flush_tlb_gru);
+	printstat(s, flush_tlb_gru_tgh);
+	printstat(s, flush_tlb_gru_zero_asid);
+	printstat(s, copy_gpa);
+	printstat(s, mesq_receive);
+	printstat(s, mesq_receive_none);
+	printstat(s, mesq_send);
+	printstat(s, mesq_send_failed);
+	printstat(s, mesq_noop);
+	printstat(s, mesq_send_unexpected_error);
+	printstat(s, mesq_send_lb_overflow);
+	printstat(s, mesq_send_qlimit_reached);
+	printstat(s, mesq_send_amo_nacked);
+	printstat(s, mesq_send_put_nacked);
+	printstat(s, mesq_qf_not_full);
+	printstat(s, mesq_qf_locked);
+	printstat(s, mesq_qf_noop_not_full);
+	printstat(s, mesq_qf_switch_head_failed);
+	printstat(s, mesq_qf_unexpected_error);
+	printstat(s, mesq_noop_unexpected_error);
+	printstat(s, mesq_noop_lb_overflow);
+	printstat(s, mesq_noop_qlimit_reached);
+	printstat(s, mesq_noop_amo_nacked);
+	printstat(s, mesq_noop_put_nacked);
+	return 0;
+}
+
+static ssize_t statistics_write(struct file *file, const char __user *userbuf,
+				size_t count, loff_t *data)
+{
+	memset(&gru_stats, 0, sizeof(gru_stats));
+	return count;
+}
+
+static int options_show(struct seq_file *s, void *p)
+{
+	seq_printf(s, "0x%lx\n", gru_options);
+	return 0;
+}
+
+static ssize_t options_write(struct file *file, const char __user *userbuf,
+			     size_t count, loff_t *data)
+{
+	unsigned long val;
+	char buf[80];
+
+	if (copy_from_user
+	    (buf, userbuf, count < sizeof(buf) ? count : sizeof(buf)))
+		return -EFAULT;
+	if (!strict_strtoul(buf, 10, &val))
+		gru_options = val;
+
+	return count;
+}
+
+static int cch_seq_show(struct seq_file *file, void *data)
+{
+	long gid = *(long *)data;
+	int i;
+	struct gru_state *gru = GID_TO_GRU(gid);
+	struct gru_thread_state *ts;
+	const char *mode[] = { "??", "UPM", "INTR", "OS_POLL" };
+
+	if (gid == 0)
+		seq_printf(file, "#%5s%5s%6s%9s%6s%8s%8s\n", "gid", "bid",
+			   "ctx#", "pid", "cbrs", "dsbytes", "mode");
+	if (gru)
+		for (i = 0; i < GRU_NUM_CCH; i++) {
+			ts = gru->gs_gts[i];
+			if (!ts)
+				continue;
+			seq_printf(file, " %5d%5d%6d%9d%6d%8d%8s\n",
+				   gru->gs_gid, gru->gs_blade_id, i,
+				   ts->ts_tgid_owner,
+				   ts->ts_cbr_au_count * GRU_CBR_AU_SIZE,
+				   ts->ts_cbr_au_count * GRU_DSR_AU_BYTES,
+				   mode[ts->ts_user_options &
+					GRU_OPT_MISS_MASK]);
+		}
+
+	return 0;
+}
+
+static int gru_seq_show(struct seq_file *file, void *data)
+{
+	long gid = *(long *)data, ctxfree, cbrfree, dsrfree;
+	struct gru_state *gru = GID_TO_GRU(gid);
+
+	if (gid == 0) {
+		seq_printf(file, "#%5s%5s%7s%6s%6s%8s%6s%6s\n", "gid", "nid",
+			   "ctx", "cbr", "dsr", "ctx", "cbr", "dsr");
+		seq_printf(file, "#%5s%5s%7s%6s%6s%8s%6s%6s\n", "", "", "busy",
+			   "busy", "busy", "free", "free", "free");
+	}
+	if (gru) {
+		ctxfree = GRU_NUM_CCH - gru->gs_active_contexts;
+		cbrfree = hweight64(gru->gs_cbr_map) * GRU_CBR_AU_SIZE;
+		dsrfree = hweight64(gru->gs_dsr_map) * GRU_DSR_AU_BYTES;
+		seq_printf(file, " %5d%5d%7ld%6ld%6ld%8ld%6ld%6ld\n",
+			   gru->gs_gid, gru->gs_blade_id, GRU_NUM_CCH - ctxfree,
+			   GRU_NUM_CBE - cbrfree, GRU_NUM_DSR_BYTES - dsrfree,
+			   ctxfree, cbrfree, dsrfree);
+	}
+
+	return 0;
+}
+
+static void seq_stop(struct seq_file *file, void *data)
+{
+}
+
+static void *seq_start(struct seq_file *file, loff_t *gid)
+{
+	if (*gid < GRU_MAX_GRUS)
+		return gid;
+	return NULL;
+}
+
+static void *seq_next(struct seq_file *file, void *data, loff_t *gid)
+{
+	(*gid)++;
+	if (*gid < GRU_MAX_GRUS)
+		return gid;
+	return NULL;
+}
+
+static const struct seq_operations cch_seq_ops = {
+	.start	= seq_start,
+	.next	= seq_next,
+	.stop	= seq_stop,
+	.show	= cch_seq_show
+};
+
+static const struct seq_operations gru_seq_ops = {
+	.start	= seq_start,
+	.next	= seq_next,
+	.stop	= seq_stop,
+	.show	= gru_seq_show
+};
+
+static int statistics_open(struct inode *inode, struct file *file)
+{
+	return single_open(file, statistics_show, NULL);
+}
+
+static int options_open(struct inode *inode, struct file *file)
+{
+	return single_open(file, options_show, NULL);
+}
+
+static int cch_open(struct inode *inode, struct file *file)
+{
+	return seq_open(file, &cch_seq_ops);
+}
+
+static int gru_open(struct inode *inode, struct file *file)
+{
+	return seq_open(file, &gru_seq_ops);
+}
+
+/* *INDENT-OFF* */
+static const struct file_operations statistics_fops = {
+	.open 		= statistics_open,
+	.read 		= seq_read,
+	.write 		= statistics_write,
+	.llseek 	= seq_lseek,
+	.release 	= single_release,
+};
+
+static const struct file_operations options_fops = {
+	.open 		= options_open,
+	.read 		= seq_read,
+	.write 		= options_write,
+	.llseek 	= seq_lseek,
+	.release 	= single_release,
+};
+
+static const struct file_operations cch_fops = {
+	.open 		= cch_open,
+	.read 		= seq_read,
+	.llseek 	= seq_lseek,
+	.release 	= seq_release,
+};
+static const struct file_operations gru_fops = {
+	.open 		= gru_open,
+	.read 		= seq_read,
+	.llseek 	= seq_lseek,
+	.release 	= seq_release,
+};
+
+static struct proc_entry {
+	char *name;
+	int mode;
+	const struct file_operations *fops;
+	struct proc_dir_entry *entry;
+} proc_files[] = {
+	{"statistics", 0644, &statistics_fops},
+	{"debug_options", 0644, &options_fops},
+	{"cch_status", 0444, &cch_fops},
+	{"gru_status", 0444, &gru_fops},
+	{NULL}
+};
+/* *INDENT-ON* */
+
+static struct proc_dir_entry *proc_gru __read_mostly;
+
+static int create_proc_file(struct proc_entry *p)
+{
+	p->entry = create_proc_entry(p->name, p->mode, proc_gru);
+	if (!p->entry)
+		return -1;
+	p->entry->proc_fops = p->fops;
+	return 0;
+}
+
+static void delete_proc_files(void)
+{
+	struct proc_entry *p;
+
+	if (proc_gru) {
+		for (p = proc_files; p->name; p++)
+			if (p->entry)
+				remove_proc_entry(p->name, proc_gru);
+		remove_proc_entry("gru", NULL);
+	}
+}
+
+int gru_proc_init(void)
+{
+	struct proc_entry *p;
+
+	proc_mkdir("sgi_uv", NULL);
+	proc_gru = proc_mkdir("sgi_uv/gru", NULL);
+
+	for (p = proc_files; p->name; p++)
+		if (create_proc_file(p))
+			goto err;
+	return 0;
+
+err:
+	delete_proc_files();
+	return -1;
+}
+
+void gru_proc_exit(void)
+{
+	delete_proc_files();
+}
diff --git a/drivers/misc/sgi-gru/grutables.h b/drivers/misc/sgi-gru/grutables.h
new file mode 100644
index 000000000000..a78f70deeb59
--- /dev/null
+++ b/drivers/misc/sgi-gru/grutables.h
@@ -0,0 +1,609 @@
+/*
+ * SN Platform GRU Driver
+ *
+ *            GRU DRIVER TABLES, MACROS, externs, etc
+ *
+ *  Copyright (c) 2008 Silicon Graphics, Inc.  All Rights Reserved.
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+
+#ifndef __GRUTABLES_H__
+#define __GRUTABLES_H__
+
+/*
+ * GRU Chiplet:
+ *   The GRU is a user addressible memory accelerator. It provides
+ *   several forms of load, store, memset, bcopy instructions. In addition, it
+ *   contains special instructions for AMOs, sending messages to message
+ *   queues, etc.
+ *
+ *   The GRU is an integral part of the node controller. It connects
+ *   directly to the cpu socket. In its current implementation, there are 2
+ *   GRU chiplets in the node controller on each blade (~node).
+ *
+ *   The entire GRU memory space is fully coherent and cacheable by the cpus.
+ *
+ *   Each GRU chiplet has a physical memory map that looks like the following:
+ *
+ *   	+-----------------+
+ *   	|/////////////////|
+ *   	|/////////////////|
+ *   	|/////////////////|
+ *   	|/////////////////|
+ *   	|/////////////////|
+ *   	|/////////////////|
+ *   	|/////////////////|
+ *   	|/////////////////|
+ *   	+-----------------+
+ *   	|  system control |
+ *   	+-----------------+        _______ +-------------+
+ *   	|/////////////////|       /        |             |
+ *   	|/////////////////|      /         |             |
+ *   	|/////////////////|     /          | instructions|
+ *   	|/////////////////|    /           |             |
+ *   	|/////////////////|   /            |             |
+ *   	|/////////////////|  /             |-------------|
+ *   	|/////////////////| /              |             |
+ *   	+-----------------+                |             |
+ *   	|   context 15    |                |  data       |
+ *   	+-----------------+                |             |
+ *   	|    ......       | \              |             |
+ *   	+-----------------+  \____________ +-------------+
+ *   	|   context 1     |
+ *   	+-----------------+
+ *   	|   context 0     |
+ *   	+-----------------+
+ *
+ *   Each of the "contexts" is a chunk of memory that can be mmaped into user
+ *   space. The context consists of 2 parts:
+ *
+ *  	- an instruction space that can be directly accessed by the user
+ *  	  to issue GRU instructions and to check instruction status.
+ *
+ *  	- a data area that acts as normal RAM.
+ *
+ *   User instructions contain virtual addresses of data to be accessed by the
+ *   GRU. The GRU contains a TLB that is used to convert these user virtual
+ *   addresses to physical addresses.
+ *
+ *   The "system control" area of the GRU chiplet is used by the kernel driver
+ *   to manage user contexts and to perform functions such as TLB dropin and
+ *   purging.
+ *
+ *   One context may be reserved for the kernel and used for cross-partition
+ *   communication. The GRU will also be used to asynchronously zero out
+ *   large blocks of memory (not currently implemented).
+ *
+ *
+ * Tables:
+ *
+ * 	VDATA-VMA Data		- Holds a few parameters. Head of linked list of
+ * 				  GTS tables for threads using the GSEG
+ * 	GTS - Gru Thread State  - contains info for managing a GSEG context. A
+ * 				  GTS is allocated for each thread accessing a
+ * 				  GSEG.
+ *     	GTD - GRU Thread Data   - contains shadow copy of GRU data when GSEG is
+ *     				  not loaded into a GRU
+ *	GMS - GRU Memory Struct - Used to manage TLB shootdowns. Tracks GRUs
+ *				  where a GSEG has been loaded. Similar to
+ *				  an mm_struct but for GRU.
+ *
+ *	GS  - GRU State 	- Used to manage the state of a GRU chiplet
+ *	BS  - Blade State	- Used to manage state of all GRU chiplets
+ *				  on a blade
+ *
+ *
+ *  Normal task tables for task using GRU.
+ *  		- 2 threads in process
+ *  		- 2 GSEGs open in process
+ *  		- GSEG1 is being used by both threads
+ *  		- GSEG2 is used only by thread 2
+ *
+ *       task -->|
+ *       task ---+---> mm ->------ (notifier) -------+-> gms
+ *                     |                             |
+ *                     |--> vma -> vdata ---> gts--->|		GSEG1 (thread1)
+ *                     |                  |          |
+ *                     |                  +-> gts--->|		GSEG1 (thread2)
+ *                     |                             |
+ *                     |--> vma -> vdata ---> gts--->|		GSEG2 (thread2)
+ *                     .
+ *                     .
+ *
+ *  GSEGs are marked DONTCOPY on fork
+ *
+ * At open
+ * 	file.private_data -> NULL
+ *
+ * At mmap,
+ * 	vma -> vdata
+ *
+ * After gseg reference
+ * 	vma -> vdata ->gts
+ *
+ * After fork
+ *   parent
+ * 	vma -> vdata -> gts
+ *   child
+ * 	(vma is not copied)
+ *
+ */
+
+#include <linux/rmap.h>
+#include <linux/interrupt.h>
+#include <linux/mutex.h>
+#include <linux/wait.h>
+#include <linux/mmu_notifier.h>
+#include "gru.h"
+#include "gruhandles.h"
+
+extern struct gru_stats_s gru_stats;
+extern struct gru_blade_state *gru_base[];
+extern unsigned long gru_start_paddr, gru_end_paddr;
+
+#define GRU_MAX_BLADES		MAX_NUMNODES
+#define GRU_MAX_GRUS		(GRU_MAX_BLADES * GRU_CHIPLETS_PER_BLADE)
+
+#define GRU_DRIVER_ID_STR	"SGI GRU Device Driver"
+#define GRU_DRIVER_VERSION_STR	"0.80"
+
+/*
+ * GRU statistics.
+ */
+struct gru_stats_s {
+	atomic_long_t vdata_alloc;
+	atomic_long_t vdata_free;
+	atomic_long_t gts_alloc;
+	atomic_long_t gts_free;
+	atomic_long_t vdata_double_alloc;
+	atomic_long_t gts_double_allocate;
+	atomic_long_t assign_context;
+	atomic_long_t assign_context_failed;
+	atomic_long_t free_context;
+	atomic_long_t load_context;
+	atomic_long_t unload_context;
+	atomic_long_t steal_context;
+	atomic_long_t steal_context_failed;
+	atomic_long_t nopfn;
+	atomic_long_t break_cow;
+	atomic_long_t asid_new;
+	atomic_long_t asid_next;
+	atomic_long_t asid_wrap;
+	atomic_long_t asid_reuse;
+	atomic_long_t intr;
+	atomic_long_t call_os;
+	atomic_long_t call_os_check_for_bug;
+	atomic_long_t call_os_wait_queue;
+	atomic_long_t user_flush_tlb;
+	atomic_long_t user_unload_context;
+	atomic_long_t user_exception;
+	atomic_long_t set_task_slice;
+	atomic_long_t migrate_check;
+	atomic_long_t migrated_retarget;
+	atomic_long_t migrated_unload;
+	atomic_long_t migrated_unload_delay;
+	atomic_long_t migrated_nopfn_retarget;
+	atomic_long_t migrated_nopfn_unload;
+	atomic_long_t tlb_dropin;
+	atomic_long_t tlb_dropin_fail_no_asid;
+	atomic_long_t tlb_dropin_fail_upm;
+	atomic_long_t tlb_dropin_fail_invalid;
+	atomic_long_t tlb_dropin_fail_range_active;
+	atomic_long_t tlb_dropin_fail_idle;
+	atomic_long_t tlb_dropin_fail_fmm;
+	atomic_long_t mmu_invalidate_range;
+	atomic_long_t mmu_invalidate_page;
+	atomic_long_t mmu_clear_flush_young;
+	atomic_long_t flush_tlb;
+	atomic_long_t flush_tlb_gru;
+	atomic_long_t flush_tlb_gru_tgh;
+	atomic_long_t flush_tlb_gru_zero_asid;
+
+	atomic_long_t copy_gpa;
+
+	atomic_long_t mesq_receive;
+	atomic_long_t mesq_receive_none;
+	atomic_long_t mesq_send;
+	atomic_long_t mesq_send_failed;
+	atomic_long_t mesq_noop;
+	atomic_long_t mesq_send_unexpected_error;
+	atomic_long_t mesq_send_lb_overflow;
+	atomic_long_t mesq_send_qlimit_reached;
+	atomic_long_t mesq_send_amo_nacked;
+	atomic_long_t mesq_send_put_nacked;
+	atomic_long_t mesq_qf_not_full;
+	atomic_long_t mesq_qf_locked;
+	atomic_long_t mesq_qf_noop_not_full;
+	atomic_long_t mesq_qf_switch_head_failed;
+	atomic_long_t mesq_qf_unexpected_error;
+	atomic_long_t mesq_noop_unexpected_error;
+	atomic_long_t mesq_noop_lb_overflow;
+	atomic_long_t mesq_noop_qlimit_reached;
+	atomic_long_t mesq_noop_amo_nacked;
+	atomic_long_t mesq_noop_put_nacked;
+
+};
+
+#define OPT_DPRINT	1
+#define OPT_STATS	2
+#define GRU_QUICKLOOK	4
+
+
+#define IRQ_GRU			110	/* Starting IRQ number for interrupts */
+
+/* Delay in jiffies between attempts to assign a GRU context */
+#define GRU_ASSIGN_DELAY	((HZ * 20) / 1000)
+
+/*
+ * If a process has it's context stolen, min delay in jiffies before trying to
+ * steal a context from another process.
+ */
+#define GRU_STEAL_DELAY		((HZ * 200) / 1000)
+
+#define STAT(id)	do {						\
+				if (gru_options & OPT_STATS)		\
+					atomic_long_inc(&gru_stats.id);	\
+			} while (0)
+
+#ifdef CONFIG_SGI_GRU_DEBUG
+#define gru_dbg(dev, fmt, x...)						\
+	do {								\
+		if (gru_options & OPT_DPRINT)				\
+			dev_dbg(dev, "%s: " fmt, __func__, x);		\
+	} while (0)
+#else
+#define gru_dbg(x...)
+#endif
+
+/*-----------------------------------------------------------------------------
+ * ASID management
+ */
+#define MAX_ASID	0xfffff0
+#define MIN_ASID	8
+#define ASID_INC	8	/* number of regions */
+
+/* Generate a GRU asid value from a GRU base asid & a virtual address. */
+#if defined CONFIG_IA64
+#define VADDR_HI_BIT		64
+#define GRUREGION(addr)		((addr) >> (VADDR_HI_BIT - 3) & 3)
+#elif defined CONFIG_X86_64
+#define VADDR_HI_BIT		48
+#define GRUREGION(addr)		(0)		/* ZZZ could do better */
+#else
+#error "Unsupported architecture"
+#endif
+#define GRUASID(asid, addr)	((asid) + GRUREGION(addr))
+
+/*------------------------------------------------------------------------------
+ *  File & VMS Tables
+ */
+
+struct gru_state;
+
+/*
+ * This structure is pointed to from the mmstruct via the notifier pointer.
+ * There is one of these per address space.
+ */
+struct gru_mm_tracker {
+	unsigned int		mt_asid_gen;	/* ASID wrap count */
+	int			mt_asid;	/* current base ASID for gru */
+	unsigned short		mt_ctxbitmap;	/* bitmap of contexts using
+						   asid */
+};
+
+struct gru_mm_struct {
+	struct mmu_notifier	ms_notifier;
+	atomic_t		ms_refcnt;
+	spinlock_t		ms_asid_lock;	/* protects ASID assignment */
+	atomic_t		ms_range_active;/* num range_invals active */
+	char			ms_released;
+	wait_queue_head_t	ms_wait_queue;
+	DECLARE_BITMAP(ms_asidmap, GRU_MAX_GRUS);
+	struct gru_mm_tracker	ms_asids[GRU_MAX_GRUS];
+};
+
+/*
+ * One of these structures is allocated when a GSEG is mmaped. The
+ * structure is pointed to by the vma->vm_private_data field in the vma struct.
+ */
+struct gru_vma_data {
+	spinlock_t		vd_lock;	/* Serialize access to vma */
+	struct list_head	vd_head;	/* head of linked list of gts */
+	long			vd_user_options;/* misc user option flags */
+	int			vd_cbr_au_count;
+	int			vd_dsr_au_count;
+};
+
+/*
+ * One of these is allocated for each thread accessing a mmaped GRU. A linked
+ * list of these structure is hung off the struct gru_vma_data in the mm_struct.
+ */
+struct gru_thread_state {
+	struct list_head	ts_next;	/* list - head at vma-private */
+	struct mutex		ts_ctxlock;	/* load/unload CTX lock */
+	struct mm_struct	*ts_mm;		/* mm currently mapped to
+						   context */
+	struct vm_area_struct	*ts_vma;	/* vma of GRU context */
+	struct gru_state	*ts_gru;	/* GRU where the context is
+						   loaded */
+	struct gru_mm_struct	*ts_gms;	/* asid & ioproc struct */
+	unsigned long		ts_cbr_map;	/* map of allocated CBRs */
+	unsigned long		ts_dsr_map;	/* map of allocated DATA
+						   resources */
+	unsigned long		ts_steal_jiffies;/* jiffies when context last
+						    stolen */
+	long			ts_user_options;/* misc user option flags */
+	pid_t			ts_tgid_owner;	/* task that is using the
+						   context - for migration */
+	int			ts_tsid;	/* thread that owns the
+						   structure */
+	int			ts_tlb_int_select;/* target cpu if interrupts
+						     enabled */
+	int			ts_ctxnum;	/* context number where the
+						   context is loaded */
+	atomic_t		ts_refcnt;	/* reference count GTS */
+	unsigned char		ts_dsr_au_count;/* Number of DSR resources
+						   required for contest */
+	unsigned char		ts_cbr_au_count;/* Number of CBR resources
+						   required for contest */
+	char			ts_force_unload;/* force context to be unloaded
+						   after migration */
+	char			ts_cbr_idx[GRU_CBR_AU];/* CBR numbers of each
+							  allocated CB */
+	unsigned long		ts_gdata[0];	/* save area for GRU data (CB,
+						   DS, CBE) */
+};
+
+/*
+ * Threaded programs actually allocate an array of GSEGs when a context is
+ * created. Each thread uses a separate GSEG. TSID is the index into the GSEG
+ * array.
+ */
+#define TSID(a, v)		(((a) - (v)->vm_start) / GRU_GSEG_PAGESIZE)
+#define UGRUADDR(gts)		((gts)->ts_vma->vm_start +		\
+					(gts)->ts_tsid * GRU_GSEG_PAGESIZE)
+
+#define NULLCTX			(-1)	/* if context not loaded into GRU */
+
+/*-----------------------------------------------------------------------------
+ *  GRU State Tables
+ */
+
+/*
+ * One of these exists for each GRU chiplet.
+ */
+struct gru_state {
+	struct gru_blade_state	*gs_blade;		/* GRU state for entire
+							   blade */
+	unsigned long		gs_gru_base_paddr;	/* Physical address of
+							   gru segments (64) */
+	void			*gs_gru_base_vaddr;	/* Virtual address of
+							   gru segments (64) */
+	unsigned char		gs_gid;			/* unique GRU number */
+	unsigned char		gs_tgh_local_shift;	/* used to pick TGH for
+							   local flush */
+	unsigned char		gs_tgh_first_remote;	/* starting TGH# for
+							   remote flush */
+	unsigned short		gs_blade_id;		/* blade of GRU */
+	spinlock_t		gs_asid_lock;		/* lock used for
+							   assigning asids */
+	spinlock_t		gs_lock;		/* lock used for
+							   assigning contexts */
+
+	/* -- the following are protected by the gs_asid_lock spinlock ---- */
+	unsigned int		gs_asid;		/* Next availe ASID */
+	unsigned int		gs_asid_limit;		/* Limit of available
+							   ASIDs */
+	unsigned int		gs_asid_gen;		/* asid generation.
+							   Inc on wrap */
+
+	/* --- the following fields are protected by the gs_lock spinlock --- */
+	unsigned long		gs_context_map;		/* bitmap to manage
+							   contexts in use */
+	unsigned long		gs_cbr_map;		/* bitmap to manage CB
+							   resources */
+	unsigned long		gs_dsr_map;		/* bitmap used to manage
+							   DATA resources */
+	unsigned int		gs_reserved_cbrs;	/* Number of kernel-
+							   reserved cbrs */
+	unsigned int		gs_reserved_dsr_bytes;	/* Bytes of kernel-
+							   reserved dsrs */
+	unsigned short		gs_active_contexts;	/* number of contexts
+							   in use */
+	struct gru_thread_state	*gs_gts[GRU_NUM_CCH];	/* GTS currently using
+							   the context */
+};
+
+/*
+ * This structure contains the GRU state for all the GRUs on a blade.
+ */
+struct gru_blade_state {
+	void			*kernel_cb;		/* First kernel
+							   reserved cb */
+	void			*kernel_dsr;		/* First kernel
+							   reserved DSR */
+	/* ---- the following are protected by the bs_lock spinlock ---- */
+	spinlock_t		bs_lock;		/* lock used for
+							   stealing contexts */
+	int			bs_lru_ctxnum;		/* STEAL - last context
+							   stolen */
+	struct gru_state	*bs_lru_gru;		/* STEAL - last gru
+							   stolen */
+
+	struct gru_state	bs_grus[GRU_CHIPLETS_PER_BLADE];
+};
+
+/*-----------------------------------------------------------------------------
+ * Address Primitives
+ */
+#define get_tfm_for_cpu(g, c)						\
+	((struct gru_tlb_fault_map *)get_tfm((g)->gs_gru_base_vaddr, (c)))
+#define get_tfh_by_index(g, i)						\
+	((struct gru_tlb_fault_handle *)get_tfh((g)->gs_gru_base_vaddr, (i)))
+#define get_tgh_by_index(g, i)						\
+	((struct gru_tlb_global_handle *)get_tgh((g)->gs_gru_base_vaddr, (i)))
+#define get_cbe_by_index(g, i)						\
+	((struct gru_control_block_extended *)get_cbe((g)->gs_gru_base_vaddr,\
+			(i)))
+
+/*-----------------------------------------------------------------------------
+ * Useful Macros
+ */
+
+/* Given a blade# & chiplet#, get a pointer to the GRU */
+#define get_gru(b, c)		(&gru_base[b]->bs_grus[c])
+
+/* Number of bytes to save/restore when unloading/loading GRU contexts */
+#define DSR_BYTES(dsr)		((dsr) * GRU_DSR_AU_BYTES)
+#define CBR_BYTES(cbr)		((cbr) * GRU_HANDLE_BYTES * GRU_CBR_AU_SIZE * 2)
+
+/* Convert a user CB number to the actual CBRNUM */
+#define thread_cbr_number(gts, n) ((gts)->ts_cbr_idx[(n) / GRU_CBR_AU_SIZE] \
+				  * GRU_CBR_AU_SIZE + (n) % GRU_CBR_AU_SIZE)
+
+/* Convert a gid to a pointer to the GRU */
+#define GID_TO_GRU(gid)							\
+	(gru_base[(gid) / GRU_CHIPLETS_PER_BLADE] ?			\
+		(&gru_base[(gid) / GRU_CHIPLETS_PER_BLADE]->		\
+			bs_grus[(gid) % GRU_CHIPLETS_PER_BLADE]) :	\
+	 NULL)
+
+/* Scan all active GRUs in a GRU bitmap */
+#define for_each_gru_in_bitmap(gid, map)				\
+	for ((gid) = find_first_bit((map), GRU_MAX_GRUS); (gid) < GRU_MAX_GRUS;\
+		(gid)++, (gid) = find_next_bit((map), GRU_MAX_GRUS, (gid)))
+
+/* Scan all active GRUs on a specific blade */
+#define for_each_gru_on_blade(gru, nid, i)				\
+	for ((gru) = gru_base[nid]->bs_grus, (i) = 0;			\
+			(i) < GRU_CHIPLETS_PER_BLADE;			\
+			(i)++, (gru)++)
+
+/* Scan all active GTSs on a gru. Note: must hold ss_lock to use this macro. */
+#define for_each_gts_on_gru(gts, gru, ctxnum)				\
+	for ((ctxnum) = 0; (ctxnum) < GRU_NUM_CCH; (ctxnum)++)		\
+		if (((gts) = (gru)->gs_gts[ctxnum]))
+
+/* Scan each CBR whose bit is set in a TFM (or copy of) */
+#define for_each_cbr_in_tfm(i, map)					\
+	for ((i) = find_first_bit(map, GRU_NUM_CBE);			\
+			(i) < GRU_NUM_CBE;				\
+			(i)++, (i) = find_next_bit(map, GRU_NUM_CBE, i))
+
+/* Scan each CBR in a CBR bitmap. Note: multiple CBRs in an allocation unit */
+#define for_each_cbr_in_allocation_map(i, map, k)			\
+	for ((k) = find_first_bit(map, GRU_CBR_AU); (k) < GRU_CBR_AU;	\
+			(k) = find_next_bit(map, GRU_CBR_AU, (k) + 1)) 	\
+		for ((i) = (k)*GRU_CBR_AU_SIZE;				\
+				(i) < ((k) + 1) * GRU_CBR_AU_SIZE; (i)++)
+
+/* Scan each DSR in a DSR bitmap. Note: multiple DSRs in an allocation unit */
+#define for_each_dsr_in_allocation_map(i, map, k)			\
+	for ((k) = find_first_bit((const unsigned long *)map, GRU_DSR_AU);\
+			(k) < GRU_DSR_AU;				\
+			(k) = find_next_bit((const unsigned long *)map,	\
+					  GRU_DSR_AU, (k) + 1))		\
+		for ((i) = (k) * GRU_DSR_AU_CL;				\
+				(i) < ((k) + 1) * GRU_DSR_AU_CL; (i)++)
+
+#define gseg_physical_address(gru, ctxnum)				\
+		((gru)->gs_gru_base_paddr + ctxnum * GRU_GSEG_STRIDE)
+#define gseg_virtual_address(gru, ctxnum)				\
+		((gru)->gs_gru_base_vaddr + ctxnum * GRU_GSEG_STRIDE)
+
+/*-----------------------------------------------------------------------------
+ * Lock / Unlock GRU handles
+ * 	Use the "delresp" bit in the handle as a "lock" bit.
+ */
+
+/* Lock hierarchy checking enabled only in emulator */
+
+static inline void __lock_handle(void *h)
+{
+	while (test_and_set_bit(1, h))
+		cpu_relax();
+}
+
+static inline void __unlock_handle(void *h)
+{
+	clear_bit(1, h);
+}
+
+static inline void lock_cch_handle(struct gru_context_configuration_handle *cch)
+{
+	__lock_handle(cch);
+}
+
+static inline void unlock_cch_handle(struct gru_context_configuration_handle
+				     *cch)
+{
+	__unlock_handle(cch);
+}
+
+static inline void lock_tgh_handle(struct gru_tlb_global_handle *tgh)
+{
+	__lock_handle(tgh);
+}
+
+static inline void unlock_tgh_handle(struct gru_tlb_global_handle *tgh)
+{
+	__unlock_handle(tgh);
+}
+
+/*-----------------------------------------------------------------------------
+ * Function prototypes & externs
+ */
+struct gru_unload_context_req;
+
+extern struct vm_operations_struct gru_vm_ops;
+extern struct device *grudev;
+
+extern struct gru_vma_data *gru_alloc_vma_data(struct vm_area_struct *vma,
+				int tsid);
+extern struct gru_thread_state *gru_find_thread_state(struct vm_area_struct
+				*vma, int tsid);
+extern struct gru_thread_state *gru_alloc_thread_state(struct vm_area_struct
+				*vma, int tsid);
+extern void gru_unload_context(struct gru_thread_state *gts, int savestate);
+extern void gts_drop(struct gru_thread_state *gts);
+extern void gru_tgh_flush_init(struct gru_state *gru);
+extern int gru_kservices_init(struct gru_state *gru);
+extern irqreturn_t gru_intr(int irq, void *dev_id);
+extern int gru_handle_user_call_os(unsigned long address);
+extern int gru_user_flush_tlb(unsigned long arg);
+extern int gru_user_unload_context(unsigned long arg);
+extern int gru_get_exception_detail(unsigned long arg);
+extern int gru_set_task_slice(long address);
+extern int gru_cpu_fault_map_id(void);
+extern struct vm_area_struct *gru_find_vma(unsigned long vaddr);
+extern void gru_flush_all_tlb(struct gru_state *gru);
+extern int gru_proc_init(void);
+extern void gru_proc_exit(void);
+
+extern unsigned long gru_reserve_cb_resources(struct gru_state *gru,
+		int cbr_au_count, char *cbmap);
+extern unsigned long gru_reserve_ds_resources(struct gru_state *gru,
+		int dsr_au_count, char *dsmap);
+extern int gru_fault(struct vm_area_struct *, struct vm_fault *vmf);
+extern struct gru_mm_struct *gru_register_mmu_notifier(void);
+extern void gru_drop_mmu_notifier(struct gru_mm_struct *gms);
+
+extern void gru_flush_tlb_range(struct gru_mm_struct *gms, unsigned long start,
+					unsigned long len);
+
+extern unsigned long gru_options;
+
+#endif /* __GRUTABLES_H__ */
diff --git a/drivers/misc/sgi-gru/grutlbpurge.c b/drivers/misc/sgi-gru/grutlbpurge.c
new file mode 100644
index 000000000000..c84496a77691
--- /dev/null
+++ b/drivers/misc/sgi-gru/grutlbpurge.c
@@ -0,0 +1,371 @@
+/*
+ * SN Platform GRU Driver
+ *
+ * 		MMUOPS callbacks  + TLB flushing
+ *
+ * This file handles emu notifier callbacks from the core kernel. The callbacks
+ * are used to update the TLB in the GRU as a result of changes in the
+ * state of a process address space. This file also handles TLB invalidates
+ * from the GRU driver.
+ *
+ *  Copyright (c) 2008 Silicon Graphics, Inc.  All Rights Reserved.
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+
+#include <linux/kernel.h>
+#include <linux/list.h>
+#include <linux/spinlock.h>
+#include <linux/mm.h>
+#include <linux/slab.h>
+#include <linux/device.h>
+#include <linux/hugetlb.h>
+#include <linux/delay.h>
+#include <linux/timex.h>
+#include <linux/srcu.h>
+#include <asm/processor.h>
+#include "gru.h"
+#include "grutables.h"
+#include <asm/uv/uv_hub.h>
+
+#define gru_random()	get_cycles()
+
+/* ---------------------------------- TLB Invalidation functions --------
+ * get_tgh_handle
+ *
+ * Find a TGH to use for issuing a TLB invalidate. For GRUs that are on the
+ * local blade, use a fixed TGH that is a function of the blade-local cpu
+ * number. Normally, this TGH is private to the cpu & no contention occurs for
+ * the TGH. For offblade GRUs, select a random TGH in the range above the
+ * private TGHs. A spinlock is required to access this TGH & the lock must be
+ * released when the invalidate is completes. This sucks, but it is the best we
+ * can do.
+ *
+ * Note that the spinlock is IN the TGH handle so locking does not involve
+ * additional cache lines.
+ *
+ */
+static inline int get_off_blade_tgh(struct gru_state *gru)
+{
+	int n;
+
+	n = GRU_NUM_TGH - gru->gs_tgh_first_remote;
+	n = gru_random() % n;
+	n += gru->gs_tgh_first_remote;
+	return n;
+}
+
+static inline int get_on_blade_tgh(struct gru_state *gru)
+{
+	return uv_blade_processor_id() >> gru->gs_tgh_local_shift;
+}
+
+static struct gru_tlb_global_handle *get_lock_tgh_handle(struct gru_state
+							 *gru)
+{
+	struct gru_tlb_global_handle *tgh;
+	int n;
+
+	preempt_disable();
+	if (uv_numa_blade_id() == gru->gs_blade_id)
+		n = get_on_blade_tgh(gru);
+	else
+		n = get_off_blade_tgh(gru);
+	tgh = get_tgh_by_index(gru, n);
+	lock_tgh_handle(tgh);
+
+	return tgh;
+}
+
+static void get_unlock_tgh_handle(struct gru_tlb_global_handle *tgh)
+{
+	unlock_tgh_handle(tgh);
+	preempt_enable();
+}
+
+/*
+ * gru_flush_tlb_range
+ *
+ * General purpose TLB invalidation function. This function scans every GRU in
+ * the ENTIRE system (partition) looking for GRUs where the specified MM has
+ * been accessed by the GRU. For each GRU found, the TLB must be invalidated OR
+ * the ASID invalidated. Invalidating an ASID causes a new ASID to be assigned
+ * on the next fault. This effectively flushes the ENTIRE TLB for the MM at the
+ * cost of (possibly) a large number of future TLBmisses.
+ *
+ * The current algorithm is optimized based on the following (somewhat true)
+ * assumptions:
+ * 	- GRU contexts are not loaded into a GRU unless a reference is made to
+ * 	  the data segment or control block (this is true, not an assumption).
+ * 	  If a DS/CB is referenced, the user will also issue instructions that
+ * 	  cause TLBmisses. It is not necessary to optimize for the case where
+ * 	  contexts are loaded but no instructions cause TLB misses. (I know
+ * 	  this will happen but I'm not optimizing for it).
+ * 	- GRU instructions to invalidate TLB entries are SLOOOOWWW - normally
+ * 	  a few usec but in unusual cases, it could be longer. Avoid if
+ * 	  possible.
+ * 	- intrablade process migration between cpus is not frequent but is
+ * 	  common.
+ * 	- a GRU context is not typically migrated to a different GRU on the
+ * 	  blade because of intrablade migration
+ *	- interblade migration is rare. Processes migrate their GRU context to
+ *	  the new blade.
+ *	- if interblade migration occurs, migration back to the original blade
+ *	  is very very rare (ie., no optimization for this case)
+ *	- most GRU instruction operate on a subset of the user REGIONS. Code
+ *	  & shared library regions are not likely targets of GRU instructions.
+ *
+ * To help improve the efficiency of TLB invalidation, the GMS data
+ * structure is maintained for EACH address space (MM struct). The GMS is
+ * also the structure that contains the pointer to the mmu callout
+ * functions. This structure is linked to the mm_struct for the address space
+ * using the mmu "register" function. The mmu interfaces are used to
+ * provide the callbacks for TLB invalidation. The GMS contains:
+ *
+ * 	- asid[maxgrus] array. ASIDs are assigned to a GRU when a context is
+ * 	  loaded into the GRU.
+ * 	- asidmap[maxgrus]. bitmap to make it easier to find non-zero asids in
+ * 	  the above array
+ *	- ctxbitmap[maxgrus]. Indicates the contexts that are currently active
+ *	  in the GRU for the address space. This bitmap must be passed to the
+ *	  GRU to do an invalidate.
+ *
+ * The current algorithm for invalidating TLBs is:
+ * 	- scan the asidmap for GRUs where the context has been loaded, ie,
+ * 	  asid is non-zero.
+ * 	- for each gru found:
+ * 		- if the ctxtmap is non-zero, there are active contexts in the
+ * 		  GRU. TLB invalidate instructions must be issued to the GRU.
+ *		- if the ctxtmap is zero, no context is active. Set the ASID to
+ *		  zero to force a full TLB invalidation. This is fast but will
+ *		  cause a lot of TLB misses if the context is reloaded onto the
+ *		  GRU
+ *
+ */
+
+void gru_flush_tlb_range(struct gru_mm_struct *gms, unsigned long start,
+			 unsigned long len)
+{
+	struct gru_state *gru;
+	struct gru_mm_tracker *asids;
+	struct gru_tlb_global_handle *tgh;
+	unsigned long num;
+	int grupagesize, pagesize, pageshift, gid, asid;
+
+	/* ZZZ TODO - handle huge pages */
+	pageshift = PAGE_SHIFT;
+	pagesize = (1UL << pageshift);
+	grupagesize = GRU_PAGESIZE(pageshift);
+	num = min(((len + pagesize - 1) >> pageshift), GRUMAXINVAL);
+
+	STAT(flush_tlb);
+	gru_dbg(grudev, "gms %p, start 0x%lx, len 0x%lx, asidmap 0x%lx\n", gms,
+		start, len, gms->ms_asidmap[0]);
+
+	spin_lock(&gms->ms_asid_lock);
+	for_each_gru_in_bitmap(gid, gms->ms_asidmap) {
+		STAT(flush_tlb_gru);
+		gru = GID_TO_GRU(gid);
+		asids = gms->ms_asids + gid;
+		asid = asids->mt_asid;
+		if (asids->mt_ctxbitmap && asid) {
+			STAT(flush_tlb_gru_tgh);
+			asid = GRUASID(asid, start);
+			gru_dbg(grudev,
+	"  FLUSH gruid %d, asid 0x%x, num %ld, cbmap 0x%x\n",
+				gid, asid, num, asids->mt_ctxbitmap);
+			tgh = get_lock_tgh_handle(gru);
+			tgh_invalidate(tgh, start, 0, asid, grupagesize, 0,
+				       num - 1, asids->mt_ctxbitmap);
+			get_unlock_tgh_handle(tgh);
+		} else {
+			STAT(flush_tlb_gru_zero_asid);
+			asids->mt_asid = 0;
+			__clear_bit(gru->gs_gid, gms->ms_asidmap);
+			gru_dbg(grudev,
+	"  CLEARASID gruid %d, asid 0x%x, cbtmap 0x%x, asidmap 0x%lx\n",
+				gid, asid, asids->mt_ctxbitmap,
+				gms->ms_asidmap[0]);
+		}
+	}
+	spin_unlock(&gms->ms_asid_lock);
+}
+
+/*
+ * Flush the entire TLB on a chiplet.
+ */
+void gru_flush_all_tlb(struct gru_state *gru)
+{
+	struct gru_tlb_global_handle *tgh;
+
+	gru_dbg(grudev, "gru %p, gid %d\n", gru, gru->gs_gid);
+	tgh = get_lock_tgh_handle(gru);
+	tgh_invalidate(tgh, 0, ~0, 0, 1, 1, GRUMAXINVAL - 1, 0);
+	get_unlock_tgh_handle(tgh);
+	preempt_enable();
+}
+
+/*
+ * MMUOPS notifier callout functions
+ */
+static void gru_invalidate_range_start(struct mmu_notifier *mn,
+				       struct mm_struct *mm,
+				       unsigned long start, unsigned long end)
+{
+	struct gru_mm_struct *gms = container_of(mn, struct gru_mm_struct,
+						 ms_notifier);
+
+	STAT(mmu_invalidate_range);
+	atomic_inc(&gms->ms_range_active);
+	gru_dbg(grudev, "gms %p, start 0x%lx, end 0x%lx, act %d\n", gms,
+		start, end, atomic_read(&gms->ms_range_active));
+	gru_flush_tlb_range(gms, start, end - start);
+}
+
+static void gru_invalidate_range_end(struct mmu_notifier *mn,
+				     struct mm_struct *mm, unsigned long start,
+				     unsigned long end)
+{
+	struct gru_mm_struct *gms = container_of(mn, struct gru_mm_struct,
+						 ms_notifier);
+
+	/* ..._and_test() provides needed barrier */
+	(void)atomic_dec_and_test(&gms->ms_range_active);
+
+	wake_up_all(&gms->ms_wait_queue);
+	gru_dbg(grudev, "gms %p, start 0x%lx, end 0x%lx\n", gms, start, end);
+}
+
+static void gru_invalidate_page(struct mmu_notifier *mn, struct mm_struct *mm,
+				unsigned long address)
+{
+	struct gru_mm_struct *gms = container_of(mn, struct gru_mm_struct,
+						 ms_notifier);
+
+	STAT(mmu_invalidate_page);
+	gru_flush_tlb_range(gms, address, PAGE_SIZE);
+	gru_dbg(grudev, "gms %p, address 0x%lx\n", gms, address);
+}
+
+static void gru_release(struct mmu_notifier *mn, struct mm_struct *mm)
+{
+	struct gru_mm_struct *gms = container_of(mn, struct gru_mm_struct,
+						 ms_notifier);
+
+	gms->ms_released = 1;
+	gru_dbg(grudev, "gms %p\n", gms);
+}
+
+
+static const struct mmu_notifier_ops gru_mmuops = {
+	.invalidate_page	= gru_invalidate_page,
+	.invalidate_range_start	= gru_invalidate_range_start,
+	.invalidate_range_end	= gru_invalidate_range_end,
+	.release		= gru_release,
+};
+
+/* Move this to the basic mmu_notifier file. But for now... */
+static struct mmu_notifier *mmu_find_ops(struct mm_struct *mm,
+			const struct mmu_notifier_ops *ops)
+{
+	struct mmu_notifier *mn, *gru_mn = NULL;
+	struct hlist_node *n;
+
+	if (mm->mmu_notifier_mm) {
+		rcu_read_lock();
+		hlist_for_each_entry_rcu(mn, n, &mm->mmu_notifier_mm->list,
+					 hlist)
+		    if (mn->ops == ops) {
+			gru_mn = mn;
+			break;
+		}
+		rcu_read_unlock();
+	}
+	return gru_mn;
+}
+
+struct gru_mm_struct *gru_register_mmu_notifier(void)
+{
+	struct gru_mm_struct *gms;
+	struct mmu_notifier *mn;
+
+	mn = mmu_find_ops(current->mm, &gru_mmuops);
+	if (mn) {
+		gms = container_of(mn, struct gru_mm_struct, ms_notifier);
+		atomic_inc(&gms->ms_refcnt);
+	} else {
+		gms = kzalloc(sizeof(*gms), GFP_KERNEL);
+		if (gms) {
+			spin_lock_init(&gms->ms_asid_lock);
+			gms->ms_notifier.ops = &gru_mmuops;
+			atomic_set(&gms->ms_refcnt, 1);
+			init_waitqueue_head(&gms->ms_wait_queue);
+			__mmu_notifier_register(&gms->ms_notifier, current->mm);
+		}
+	}
+	gru_dbg(grudev, "gms %p, refcnt %d\n", gms,
+		atomic_read(&gms->ms_refcnt));
+	return gms;
+}
+
+void gru_drop_mmu_notifier(struct gru_mm_struct *gms)
+{
+	gru_dbg(grudev, "gms %p, refcnt %d, released %d\n", gms,
+		atomic_read(&gms->ms_refcnt), gms->ms_released);
+	if (atomic_dec_return(&gms->ms_refcnt) == 0) {
+		if (!gms->ms_released)
+			mmu_notifier_unregister(&gms->ms_notifier, current->mm);
+		kfree(gms);
+	}
+}
+
+/*
+ * Setup TGH parameters. There are:
+ * 	- 24 TGH handles per GRU chiplet
+ * 	- a portion (MAX_LOCAL_TGH) of the handles are reserved for
+ * 	  use by blade-local cpus
+ * 	- the rest are used by off-blade cpus. This usage is
+ * 	  less frequent than blade-local usage.
+ *
+ * For now, use 16 handles for local flushes, 8 for remote flushes. If the blade
+ * has less tan or equal to 16 cpus, each cpu has a unique handle that it can
+ * use.
+ */
+#define MAX_LOCAL_TGH	16
+
+void gru_tgh_flush_init(struct gru_state *gru)
+{
+	int cpus, shift = 0, n;
+
+	cpus = uv_blade_nr_possible_cpus(gru->gs_blade_id);
+
+	/* n = cpus rounded up to next power of 2 */
+	if (cpus) {
+		n = 1 << fls(cpus - 1);
+
+		/*
+		 * shift count for converting local cpu# to TGH index
+		 *      0 if cpus <= MAX_LOCAL_TGH,
+		 *      1 if cpus <= 2*MAX_LOCAL_TGH,
+		 *      etc
+		 */
+		shift = max(0, fls(n - 1) - fls(MAX_LOCAL_TGH - 1));
+	}
+	gru->gs_tgh_local_shift = shift;
+
+	/* first starting TGH index to use for remote purges */
+	gru->gs_tgh_first_remote = (cpus + (1 << shift) - 1) >> shift;
+
+}
diff --git a/drivers/misc/sgi-xp/Makefile b/drivers/misc/sgi-xp/Makefile
index b6e40a7958ce..35ce28578075 100644
--- a/drivers/misc/sgi-xp/Makefile
+++ b/drivers/misc/sgi-xp/Makefile
@@ -3,9 +3,17 @@
 #
 
 obj-$(CONFIG_SGI_XP)		+= xp.o
-xp-y				:= xp_main.o xp_nofault.o
+xp-y				:= xp_main.o
+xp-$(CONFIG_IA64_SGI_SN2)	+= xp_sn2.o xp_nofault.o
+xp-$(CONFIG_IA64_GENERIC)	+= xp_sn2.o xp_nofault.o xp_uv.o
+xp-$(CONFIG_IA64_SGI_UV)	+= xp_uv.o
+xp-$(CONFIG_X86_64)		+= xp_uv.o
 
 obj-$(CONFIG_SGI_XP)		+= xpc.o
 xpc-y				:= xpc_main.o xpc_channel.o xpc_partition.o
+xpc-$(CONFIG_IA64_SGI_SN2)	+= xpc_sn2.o
+xpc-$(CONFIG_IA64_GENERIC)	+= xpc_sn2.o xpc_uv.o
+xpc-$(CONFIG_IA64_SGI_UV) 	+= xpc_uv.o
+xpc-$(CONFIG_X86_64)		+= xpc_uv.o
 
 obj-$(CONFIG_SGI_XP)		+= xpnet.o
diff --git a/drivers/misc/sgi-xp/xp.h b/drivers/misc/sgi-xp/xp.h
index 03a87a307e32..859a5281c61b 100644
--- a/drivers/misc/sgi-xp/xp.h
+++ b/drivers/misc/sgi-xp/xp.h
@@ -13,11 +13,34 @@
 #ifndef _DRIVERS_MISC_SGIXP_XP_H
 #define _DRIVERS_MISC_SGIXP_XP_H
 
-#include <linux/cache.h>
-#include <linux/hardirq.h>
 #include <linux/mutex.h>
-#include <asm/sn/types.h>
-#include <asm/sn/bte.h>
+
+#ifdef CONFIG_IA64
+#include <asm/system.h>
+#include <asm/sn/arch.h>	/* defines is_shub1() and is_shub2() */
+#define is_shub()	ia64_platform_is("sn2")
+#define is_uv()		ia64_platform_is("uv")
+#endif
+#ifdef CONFIG_X86_64
+#include <asm/genapic.h>
+#define is_uv()		is_uv_system()
+#endif
+
+#ifndef is_shub1
+#define is_shub1()	0
+#endif
+
+#ifndef is_shub2
+#define is_shub2()	0
+#endif
+
+#ifndef is_shub
+#define is_shub()	0
+#endif
+
+#ifndef is_uv
+#define is_uv()		0
+#endif
 
 #ifdef USE_DBUG_ON
 #define DBUG_ON(condition)	BUG_ON(condition)
@@ -26,133 +49,56 @@
 #endif
 
 /*
- * Define the maximum number of logically defined partitions the system
- * can support. It is constrained by the maximum number of hardware
- * partitionable regions. The term 'region' in this context refers to the
- * minimum number of nodes that can comprise an access protection grouping.
- * The access protection is in regards to memory, IPI and IOI.
+ * Define the maximum number of partitions the system can possibly support.
+ * It is based on the maximum number of hardware partitionable regions. The
+ * term 'region' in this context refers to the minimum number of nodes that
+ * can comprise an access protection grouping. The access protection is in
+ * regards to memory, IPI and IOI.
  *
  * The maximum number of hardware partitionable regions is equal to the
  * maximum number of nodes in the entire system divided by the minimum number
  * of nodes that comprise an access protection grouping.
  */
-#define XP_MAX_PARTITIONS	64
-
-/*
- * Define the number of u64s required to represent all the C-brick nasids
- * as a bitmap.  The cross-partition kernel modules deal only with
- * C-brick nasids, thus the need for bitmaps which don't account for
- * odd-numbered (non C-brick) nasids.
- */
-#define XP_MAX_PHYSNODE_ID	(MAX_NUMALINK_NODES / 2)
-#define XP_NASID_MASK_BYTES	((XP_MAX_PHYSNODE_ID + 7) / 8)
-#define XP_NASID_MASK_WORDS	((XP_MAX_PHYSNODE_ID + 63) / 64)
-
-/*
- * Wrapper for bte_copy() that should it return a failure status will retry
- * the bte_copy() once in the hope that the failure was due to a temporary
- * aberration (i.e., the link going down temporarily).
- *
- * 	src - physical address of the source of the transfer.
- *	vdst - virtual address of the destination of the transfer.
- *	len - number of bytes to transfer from source to destination.
- *	mode - see bte_copy() for definition.
- *	notification - see bte_copy() for definition.
- *
- * Note: xp_bte_copy() should never be called while holding a spinlock.
- */
-static inline bte_result_t
-xp_bte_copy(u64 src, u64 vdst, u64 len, u64 mode, void *notification)
-{
-	bte_result_t ret;
-	u64 pdst = ia64_tpa(vdst);
-
-	/*
-	 * Ensure that the physically mapped memory is contiguous.
-	 *
-	 * We do this by ensuring that the memory is from region 7 only.
-	 * If the need should arise to use memory from one of the other
-	 * regions, then modify the BUG_ON() statement to ensure that the
-	 * memory from that region is always physically contiguous.
-	 */
-	BUG_ON(REGION_NUMBER(vdst) != RGN_KERNEL);
-
-	ret = bte_copy(src, pdst, len, mode, notification);
-	if ((ret != BTE_SUCCESS) && BTE_ERROR_RETRY(ret)) {
-		if (!in_interrupt())
-			cond_resched();
-
-		ret = bte_copy(src, pdst, len, mode, notification);
-	}
-
-	return ret;
-}
+#define XP_MAX_NPARTITIONS_SN2	64
+#define XP_MAX_NPARTITIONS_UV	256
 
 /*
  * XPC establishes channel connections between the local partition and any
  * other partition that is currently up. Over these channels, kernel-level
  * `users' can communicate with their counterparts on the other partitions.
  *
- * The maxinum number of channels is limited to eight. For performance reasons,
- * the internal cross partition structures require sixteen bytes per channel,
- * and eight allows all of this interface-shared info to fit in one cache line.
- *
- * XPC_NCHANNELS reflects the total number of channels currently defined.
  * If the need for additional channels arises, one can simply increase
- * XPC_NCHANNELS accordingly. If the day should come where that number
- * exceeds the MAXIMUM number of channels allowed (eight), then one will need
- * to make changes to the XPC code to allow for this.
+ * XPC_MAX_NCHANNELS accordingly. If the day should come where that number
+ * exceeds the absolute MAXIMUM number of channels possible (eight), then one
+ * will need to make changes to the XPC code to accommodate for this.
+ *
+ * The absolute maximum number of channels possible is limited to eight for
+ * performance reasons on sn2 hardware. The internal cross partition structures
+ * require sixteen bytes per channel, and eight allows all of this
+ * interface-shared info to fit in one 128-byte cacheline.
  */
 #define XPC_MEM_CHANNEL		0	/* memory channel number */
 #define	XPC_NET_CHANNEL		1	/* network channel number */
 
-#define	XPC_NCHANNELS		2	/* #of defined channels */
-#define XPC_MAX_NCHANNELS	8	/* max #of channels allowed */
+#define XPC_MAX_NCHANNELS	2	/* max #of channels allowed */
 
-#if XPC_NCHANNELS > XPC_MAX_NCHANNELS
-#error	XPC_NCHANNELS exceeds MAXIMUM allowed.
+#if XPC_MAX_NCHANNELS > 8
+#error	XPC_MAX_NCHANNELS exceeds absolute MAXIMUM possible.
 #endif
 
 /*
- * The format of an XPC message is as follows:
- *
- *      +-------+--------------------------------+
- *      | flags |////////////////////////////////|
- *      +-------+--------------------------------+
- *      |             message #                  |
- *      +----------------------------------------+
- *      |     payload (user-defined message)     |
- *      |                                        |
- *         		:
- *      |                                        |
- *      +----------------------------------------+
- *
- * The size of the payload is defined by the user via xpc_connect(). A user-
- * defined message resides in the payload area.
- *
- * The user should have no dealings with the message header, but only the
- * message's payload. When a message entry is allocated (via xpc_allocate())
- * a pointer to the payload area is returned and not the actual beginning of
- * the XPC message. The user then constructs a message in the payload area
- * and passes that pointer as an argument on xpc_send() or xpc_send_notify().
- *
- * The size of a message entry (within a message queue) must be a cacheline
- * sized multiple in order to facilitate the BTE transfer of messages from one
- * message queue to another. A macro, XPC_MSG_SIZE(), is provided for the user
+ * Define macro, XPC_MSG_SIZE(), is provided for the user
  * that wants to fit as many msg entries as possible in a given memory size
  * (e.g. a memory page).
  */
-struct xpc_msg {
-	u8 flags;		/* FOR XPC INTERNAL USE ONLY */
-	u8 reserved[7];		/* FOR XPC INTERNAL USE ONLY */
-	s64 number;		/* FOR XPC INTERNAL USE ONLY */
-
-	u64 payload;		/* user defined portion of message */
-};
+#define XPC_MSG_MAX_SIZE	128
+#define XPC_MSG_HDR_MAX_SIZE	16
+#define XPC_MSG_PAYLOAD_MAX_SIZE (XPC_MSG_MAX_SIZE - XPC_MSG_HDR_MAX_SIZE)
 
-#define XPC_MSG_PAYLOAD_OFFSET	(u64) (&((struct xpc_msg *)0)->payload)
 #define XPC_MSG_SIZE(_payload_size) \
-		L1_CACHE_ALIGN(XPC_MSG_PAYLOAD_OFFSET + (_payload_size))
+				ALIGN(XPC_MSG_HDR_MAX_SIZE + (_payload_size), \
+				      is_uv() ? 64 : 128)
+
 
 /*
  * Define the return values and values passed to user's callout functions.
@@ -233,8 +179,20 @@ enum xp_retval {
 	xpDisconnected,		/* 51: channel disconnected (closed) */
 
 	xpBteCopyError,		/* 52: bte_copy() returned error */
+	xpSalError,		/* 53: sn SAL error */
+	xpRsvdPageNotSet,	/* 54: the reserved page is not set up */
+	xpPayloadTooBig,	/* 55: payload too large for message slot */
+
+	xpUnsupported,		/* 56: unsupported functionality or resource */
+	xpNeedMoreInfo,		/* 57: more info is needed by SAL */
 
-	xpUnknownReason		/* 53: unknown reason - must be last in enum */
+	xpGruCopyError,		/* 58: gru_copy_gru() returned error */
+	xpGruSendMqError,	/* 59: gru send message queue related error */
+
+	xpBadChannelNumber,	/* 60: invalid channel number */
+	xpBadMsgType,		/* 60: invalid message type */
+
+	xpUnknownReason		/* 61: unknown reason - must be last in enum */
 };
 
 /*
@@ -285,6 +243,9 @@ typedef void (*xpc_channel_func) (enum xp_retval reason, short partid,
  * calling xpc_received().
  *
  * All other reason codes indicate failure.
+ *
+ * NOTE: The user defined function must be callable by an interrupt handler
+ *       and thus cannot block.
  */
 typedef void (*xpc_notify_func) (enum xp_retval reason, short partid,
 				 int ch_number, void *key);
@@ -308,23 +269,22 @@ struct xpc_registration {
 	xpc_channel_func func;	/* function to call */
 	void *key;		/* pointer to user's key */
 	u16 nentries;		/* #of msg entries in local msg queue */
-	u16 msg_size;		/* message queue's message size */
+	u16 entry_size;		/* message queue's message entry size */
 	u32 assigned_limit;	/* limit on #of assigned kthreads */
 	u32 idle_limit;		/* limit on #of idle kthreads */
 } ____cacheline_aligned;
 
 #define XPC_CHANNEL_REGISTERED(_c)	(xpc_registrations[_c].func != NULL)
 
-/* the following are valid xpc_allocate() flags */
+/* the following are valid xpc_send() or xpc_send_notify() flags */
 #define XPC_WAIT	0	/* wait flag */
 #define XPC_NOWAIT	1	/* no wait flag */
 
 struct xpc_interface {
 	void (*connect) (int);
 	void (*disconnect) (int);
-	enum xp_retval (*allocate) (short, int, u32, void **);
-	enum xp_retval (*send) (short, int, void *);
-	enum xp_retval (*send_notify) (short, int, void *,
+	enum xp_retval (*send) (short, int, u32, void *, u16);
+	enum xp_retval (*send_notify) (short, int, u32, void *, u16,
 					xpc_notify_func, void *);
 	void (*received) (short, int, void *);
 	enum xp_retval (*partid_to_nasids) (short, void *);
@@ -334,10 +294,9 @@ extern struct xpc_interface xpc_interface;
 
 extern void xpc_set_interface(void (*)(int),
 			      void (*)(int),
-			      enum xp_retval (*)(short, int, u32, void **),
-			      enum xp_retval (*)(short, int, void *),
-			      enum xp_retval (*)(short, int, void *,
-						  xpc_notify_func, void *),
+			      enum xp_retval (*)(short, int, u32, void *, u16),
+			      enum xp_retval (*)(short, int, u32, void *, u16,
+						 xpc_notify_func, void *),
 			      void (*)(short, int, void *),
 			      enum xp_retval (*)(short, void *));
 extern void xpc_clear_interface(void);
@@ -347,22 +306,19 @@ extern enum xp_retval xpc_connect(int, xpc_channel_func, void *, u16,
 extern void xpc_disconnect(int);
 
 static inline enum xp_retval
-xpc_allocate(short partid, int ch_number, u32 flags, void **payload)
-{
-	return xpc_interface.allocate(partid, ch_number, flags, payload);
-}
-
-static inline enum xp_retval
-xpc_send(short partid, int ch_number, void *payload)
+xpc_send(short partid, int ch_number, u32 flags, void *payload,
+	 u16 payload_size)
 {
-	return xpc_interface.send(partid, ch_number, payload);
+	return xpc_interface.send(partid, ch_number, flags, payload,
+				  payload_size);
 }
 
 static inline enum xp_retval
-xpc_send_notify(short partid, int ch_number, void *payload,
-		xpc_notify_func func, void *key)
+xpc_send_notify(short partid, int ch_number, u32 flags, void *payload,
+		u16 payload_size, xpc_notify_func func, void *key)
 {
-	return xpc_interface.send_notify(partid, ch_number, payload, func, key);
+	return xpc_interface.send_notify(partid, ch_number, flags, payload,
+					 payload_size, func, key);
 }
 
 static inline void
@@ -377,8 +333,23 @@ xpc_partid_to_nasids(short partid, void *nasids)
 	return xpc_interface.partid_to_nasids(partid, nasids);
 }
 
+extern short xp_max_npartitions;
+extern short xp_partition_id;
+extern u8 xp_region_size;
+
+extern unsigned long (*xp_pa) (void *);
+extern enum xp_retval (*xp_remote_memcpy) (unsigned long, const unsigned long,
+		       size_t);
+extern int (*xp_cpu_to_nasid) (int);
+
 extern u64 xp_nofault_PIOR_target;
 extern int xp_nofault_PIOR(void *);
 extern int xp_error_PIOR(void);
 
+extern struct device *xp;
+extern enum xp_retval xp_init_sn2(void);
+extern enum xp_retval xp_init_uv(void);
+extern void xp_exit_sn2(void);
+extern void xp_exit_uv(void);
+
 #endif /* _DRIVERS_MISC_SGIXP_XP_H */
diff --git a/drivers/misc/sgi-xp/xp_main.c b/drivers/misc/sgi-xp/xp_main.c
index 196480b691a1..66a1d19e08ad 100644
--- a/drivers/misc/sgi-xp/xp_main.c
+++ b/drivers/misc/sgi-xp/xp_main.c
@@ -14,29 +14,48 @@
  *
  */
 
-#include <linux/kernel.h>
-#include <linux/interrupt.h>
 #include <linux/module.h>
-#include <linux/mutex.h>
-#include <asm/sn/intr.h>
-#include <asm/sn/sn_sal.h>
+#include <linux/device.h>
 #include "xp.h"
 
-/*
- * The export of xp_nofault_PIOR needs to happen here since it is defined
- * in drivers/misc/sgi-xp/xp_nofault.S. The target of the nofault read is
- * defined here.
- */
-EXPORT_SYMBOL_GPL(xp_nofault_PIOR);
+/* define the XP debug device structures to be used with dev_dbg() et al */
+
+struct device_driver xp_dbg_name = {
+	.name = "xp"
+};
+
+struct device xp_dbg_subname = {
+	.bus_id = {0},		/* set to "" */
+	.driver = &xp_dbg_name
+};
+
+struct device *xp = &xp_dbg_subname;
+
+/* max #of partitions possible */
+short xp_max_npartitions;
+EXPORT_SYMBOL_GPL(xp_max_npartitions);
+
+short xp_partition_id;
+EXPORT_SYMBOL_GPL(xp_partition_id);
+
+u8 xp_region_size;
+EXPORT_SYMBOL_GPL(xp_region_size);
+
+unsigned long (*xp_pa) (void *addr);
+EXPORT_SYMBOL_GPL(xp_pa);
+
+enum xp_retval (*xp_remote_memcpy) (unsigned long dst_gpa,
+				    const unsigned long src_gpa, size_t len);
+EXPORT_SYMBOL_GPL(xp_remote_memcpy);
 
-u64 xp_nofault_PIOR_target;
-EXPORT_SYMBOL_GPL(xp_nofault_PIOR_target);
+int (*xp_cpu_to_nasid) (int cpuid);
+EXPORT_SYMBOL_GPL(xp_cpu_to_nasid);
 
 /*
  * xpc_registrations[] keeps track of xpc_connect()'s done by the kernel-level
  * users of XPC.
  */
-struct xpc_registration xpc_registrations[XPC_NCHANNELS];
+struct xpc_registration xpc_registrations[XPC_MAX_NCHANNELS];
 EXPORT_SYMBOL_GPL(xpc_registrations);
 
 /*
@@ -51,10 +70,9 @@ xpc_notloaded(void)
 struct xpc_interface xpc_interface = {
 	(void (*)(int))xpc_notloaded,
 	(void (*)(int))xpc_notloaded,
-	(enum xp_retval(*)(short, int, u32, void **))xpc_notloaded,
-	(enum xp_retval(*)(short, int, void *))xpc_notloaded,
-	(enum xp_retval(*)(short, int, void *, xpc_notify_func, void *))
-	    xpc_notloaded,
+	(enum xp_retval(*)(short, int, u32, void *, u16))xpc_notloaded,
+	(enum xp_retval(*)(short, int, u32, void *, u16, xpc_notify_func,
+			   void *))xpc_notloaded,
 	(void (*)(short, int, void *))xpc_notloaded,
 	(enum xp_retval(*)(short, void *))xpc_notloaded
 };
@@ -66,16 +84,14 @@ EXPORT_SYMBOL_GPL(xpc_interface);
 void
 xpc_set_interface(void (*connect) (int),
 		  void (*disconnect) (int),
-		  enum xp_retval (*allocate) (short, int, u32, void **),
-		  enum xp_retval (*send) (short, int, void *),
-		  enum xp_retval (*send_notify) (short, int, void *,
+		  enum xp_retval (*send) (short, int, u32, void *, u16),
+		  enum xp_retval (*send_notify) (short, int, u32, void *, u16,
 						  xpc_notify_func, void *),
 		  void (*received) (short, int, void *),
 		  enum xp_retval (*partid_to_nasids) (short, void *))
 {
 	xpc_interface.connect = connect;
 	xpc_interface.disconnect = disconnect;
-	xpc_interface.allocate = allocate;
 	xpc_interface.send = send;
 	xpc_interface.send_notify = send_notify;
 	xpc_interface.received = received;
@@ -91,13 +107,11 @@ xpc_clear_interface(void)
 {
 	xpc_interface.connect = (void (*)(int))xpc_notloaded;
 	xpc_interface.disconnect = (void (*)(int))xpc_notloaded;
-	xpc_interface.allocate = (enum xp_retval(*)(short, int, u32,
-						     void **))xpc_notloaded;
-	xpc_interface.send = (enum xp_retval(*)(short, int, void *))
+	xpc_interface.send = (enum xp_retval(*)(short, int, u32, void *, u16))
 	    xpc_notloaded;
-	xpc_interface.send_notify = (enum xp_retval(*)(short, int, void *,
-							xpc_notify_func,
-							void *))xpc_notloaded;
+	xpc_interface.send_notify = (enum xp_retval(*)(short, int, u32, void *,
+						       u16, xpc_notify_func,
+						       void *))xpc_notloaded;
 	xpc_interface.received = (void (*)(short, int, void *))
 	    xpc_notloaded;
 	xpc_interface.partid_to_nasids = (enum xp_retval(*)(short, void *))
@@ -135,11 +149,14 @@ xpc_connect(int ch_number, xpc_channel_func func, void *key, u16 payload_size,
 {
 	struct xpc_registration *registration;
 
-	DBUG_ON(ch_number < 0 || ch_number >= XPC_NCHANNELS);
+	DBUG_ON(ch_number < 0 || ch_number >= XPC_MAX_NCHANNELS);
 	DBUG_ON(payload_size == 0 || nentries == 0);
 	DBUG_ON(func == NULL);
 	DBUG_ON(assigned_limit == 0 || idle_limit > assigned_limit);
 
+	if (XPC_MSG_SIZE(payload_size) > XPC_MSG_MAX_SIZE)
+		return xpPayloadTooBig;
+
 	registration = &xpc_registrations[ch_number];
 
 	if (mutex_lock_interruptible(&registration->mutex) != 0)
@@ -152,7 +169,7 @@ xpc_connect(int ch_number, xpc_channel_func func, void *key, u16 payload_size,
 	}
 
 	/* register the channel for connection */
-	registration->msg_size = XPC_MSG_SIZE(payload_size);
+	registration->entry_size = XPC_MSG_SIZE(payload_size);
 	registration->nentries = nentries;
 	registration->assigned_limit = assigned_limit;
 	registration->idle_limit = idle_limit;
@@ -185,7 +202,7 @@ xpc_disconnect(int ch_number)
 {
 	struct xpc_registration *registration;
 
-	DBUG_ON(ch_number < 0 || ch_number >= XPC_NCHANNELS);
+	DBUG_ON(ch_number < 0 || ch_number >= XPC_MAX_NCHANNELS);
 
 	registration = &xpc_registrations[ch_number];
 
@@ -206,7 +223,7 @@ xpc_disconnect(int ch_number)
 	registration->func = NULL;
 	registration->key = NULL;
 	registration->nentries = 0;
-	registration->msg_size = 0;
+	registration->entry_size = 0;
 	registration->assigned_limit = 0;
 	registration->idle_limit = 0;
 
@@ -221,39 +238,21 @@ EXPORT_SYMBOL_GPL(xpc_disconnect);
 int __init
 xp_init(void)
 {
-	int ret, ch_number;
-	u64 func_addr = *(u64 *)xp_nofault_PIOR;
-	u64 err_func_addr = *(u64 *)xp_error_PIOR;
-
-	if (!ia64_platform_is("sn2"))
-		return -ENODEV;
+	enum xp_retval ret;
+	int ch_number;
 
-	/*
-	 * Register a nofault code region which performs a cross-partition
-	 * PIO read. If the PIO read times out, the MCA handler will consume
-	 * the error and return to a kernel-provided instruction to indicate
-	 * an error. This PIO read exists because it is guaranteed to timeout
-	 * if the destination is down (AMO operations do not timeout on at
-	 * least some CPUs on Shubs <= v1.2, which unfortunately we have to
-	 * work around).
-	 */
-	ret = sn_register_nofault_code(func_addr, err_func_addr, err_func_addr,
-				       1, 1);
-	if (ret != 0) {
-		printk(KERN_ERR "XP: can't register nofault code, error=%d\n",
-		       ret);
-	}
-	/*
-	 * Setup the nofault PIO read target. (There is no special reason why
-	 * SH_IPI_ACCESS was selected.)
-	 */
-	if (is_shub2())
-		xp_nofault_PIOR_target = SH2_IPI_ACCESS0;
+	if (is_shub())
+		ret = xp_init_sn2();
+	else if (is_uv())
+		ret = xp_init_uv();
 	else
-		xp_nofault_PIOR_target = SH1_IPI_ACCESS;
+		ret = xpUnsupported;
+
+	if (ret != xpSuccess)
+		return -ENODEV;
 
 	/* initialize the connection registration mutex */
-	for (ch_number = 0; ch_number < XPC_NCHANNELS; ch_number++)
+	for (ch_number = 0; ch_number < XPC_MAX_NCHANNELS; ch_number++)
 		mutex_init(&xpc_registrations[ch_number].mutex);
 
 	return 0;
@@ -264,12 +263,10 @@ module_init(xp_init);
 void __exit
 xp_exit(void)
 {
-	u64 func_addr = *(u64 *)xp_nofault_PIOR;
-	u64 err_func_addr = *(u64 *)xp_error_PIOR;
-
-	/* unregister the PIO read nofault code region */
-	(void)sn_register_nofault_code(func_addr, err_func_addr,
-				       err_func_addr, 1, 0);
+	if (is_shub())
+		xp_exit_sn2();
+	else if (is_uv())
+		xp_exit_uv();
 }
 
 module_exit(xp_exit);
diff --git a/drivers/misc/sgi-xp/xp_sn2.c b/drivers/misc/sgi-xp/xp_sn2.c
new file mode 100644
index 000000000000..1440134caf31
--- /dev/null
+++ b/drivers/misc/sgi-xp/xp_sn2.c
@@ -0,0 +1,146 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (c) 2008 Silicon Graphics, Inc.  All Rights Reserved.
+ */
+
+/*
+ * Cross Partition (XP) sn2-based functions.
+ *
+ *      Architecture specific implementation of common functions.
+ */
+
+#include <linux/module.h>
+#include <linux/device.h>
+#include <asm/sn/bte.h>
+#include <asm/sn/sn_sal.h>
+#include "xp.h"
+
+/*
+ * The export of xp_nofault_PIOR needs to happen here since it is defined
+ * in drivers/misc/sgi-xp/xp_nofault.S. The target of the nofault read is
+ * defined here.
+ */
+EXPORT_SYMBOL_GPL(xp_nofault_PIOR);
+
+u64 xp_nofault_PIOR_target;
+EXPORT_SYMBOL_GPL(xp_nofault_PIOR_target);
+
+/*
+ * Register a nofault code region which performs a cross-partition PIO read.
+ * If the PIO read times out, the MCA handler will consume the error and
+ * return to a kernel-provided instruction to indicate an error. This PIO read
+ * exists because it is guaranteed to timeout if the destination is down
+ * (amo operations do not timeout on at least some CPUs on Shubs <= v1.2,
+ * which unfortunately we have to work around).
+ */
+static enum xp_retval
+xp_register_nofault_code_sn2(void)
+{
+	int ret;
+	u64 func_addr;
+	u64 err_func_addr;
+
+	func_addr = *(u64 *)xp_nofault_PIOR;
+	err_func_addr = *(u64 *)xp_error_PIOR;
+	ret = sn_register_nofault_code(func_addr, err_func_addr, err_func_addr,
+				       1, 1);
+	if (ret != 0) {
+		dev_err(xp, "can't register nofault code, error=%d\n", ret);
+		return xpSalError;
+	}
+	/*
+	 * Setup the nofault PIO read target. (There is no special reason why
+	 * SH_IPI_ACCESS was selected.)
+	 */
+	if (is_shub1())
+		xp_nofault_PIOR_target = SH1_IPI_ACCESS;
+	else if (is_shub2())
+		xp_nofault_PIOR_target = SH2_IPI_ACCESS0;
+
+	return xpSuccess;
+}
+
+static void
+xp_unregister_nofault_code_sn2(void)
+{
+	u64 func_addr = *(u64 *)xp_nofault_PIOR;
+	u64 err_func_addr = *(u64 *)xp_error_PIOR;
+
+	/* unregister the PIO read nofault code region */
+	(void)sn_register_nofault_code(func_addr, err_func_addr,
+				       err_func_addr, 1, 0);
+}
+
+/*
+ * Convert a virtual memory address to a physical memory address.
+ */
+static unsigned long
+xp_pa_sn2(void *addr)
+{
+	return __pa(addr);
+}
+
+/*
+ * Wrapper for bte_copy().
+ *
+ *	dst_pa - physical address of the destination of the transfer.
+ *	src_pa - physical address of the source of the transfer.
+ *	len - number of bytes to transfer from source to destination.
+ *
+ * Note: xp_remote_memcpy_sn2() should never be called while holding a spinlock.
+ */
+static enum xp_retval
+xp_remote_memcpy_sn2(unsigned long dst_pa, const unsigned long src_pa,
+		     size_t len)
+{
+	bte_result_t ret;
+
+	ret = bte_copy(src_pa, dst_pa, len, (BTE_NOTIFY | BTE_WACQUIRE), NULL);
+	if (ret == BTE_SUCCESS)
+		return xpSuccess;
+
+	if (is_shub2()) {
+		dev_err(xp, "bte_copy() on shub2 failed, error=0x%x dst_pa="
+			"0x%016lx src_pa=0x%016lx len=%ld\\n", ret, dst_pa,
+			src_pa, len);
+	} else {
+		dev_err(xp, "bte_copy() failed, error=%d dst_pa=0x%016lx "
+			"src_pa=0x%016lx len=%ld\\n", ret, dst_pa, src_pa, len);
+	}
+
+	return xpBteCopyError;
+}
+
+static int
+xp_cpu_to_nasid_sn2(int cpuid)
+{
+	return cpuid_to_nasid(cpuid);
+}
+
+enum xp_retval
+xp_init_sn2(void)
+{
+	BUG_ON(!is_shub());
+
+	xp_max_npartitions = XP_MAX_NPARTITIONS_SN2;
+	xp_partition_id = sn_partition_id;
+	xp_region_size = sn_region_size;
+
+	xp_pa = xp_pa_sn2;
+	xp_remote_memcpy = xp_remote_memcpy_sn2;
+	xp_cpu_to_nasid = xp_cpu_to_nasid_sn2;
+
+	return xp_register_nofault_code_sn2();
+}
+
+void
+xp_exit_sn2(void)
+{
+	BUG_ON(!is_shub());
+
+	xp_unregister_nofault_code_sn2();
+}
+
diff --git a/drivers/misc/sgi-xp/xp_uv.c b/drivers/misc/sgi-xp/xp_uv.c
new file mode 100644
index 000000000000..d9f7ce2510bc
--- /dev/null
+++ b/drivers/misc/sgi-xp/xp_uv.c
@@ -0,0 +1,72 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (c) 2008 Silicon Graphics, Inc.  All Rights Reserved.
+ */
+
+/*
+ * Cross Partition (XP) uv-based functions.
+ *
+ *      Architecture specific implementation of common functions.
+ *
+ */
+
+#include <linux/device.h>
+#include <asm/uv/uv_hub.h>
+#include "../sgi-gru/grukservices.h"
+#include "xp.h"
+
+/*
+ * Convert a virtual memory address to a physical memory address.
+ */
+static unsigned long
+xp_pa_uv(void *addr)
+{
+	return uv_gpa(addr);
+}
+
+static enum xp_retval
+xp_remote_memcpy_uv(unsigned long dst_gpa, const unsigned long src_gpa,
+		    size_t len)
+{
+	int ret;
+
+	ret = gru_copy_gpa(dst_gpa, src_gpa, len);
+	if (ret == 0)
+		return xpSuccess;
+
+	dev_err(xp, "gru_copy_gpa() failed, dst_gpa=0x%016lx src_gpa=0x%016lx "
+		"len=%ld\n", dst_gpa, src_gpa, len);
+	return xpGruCopyError;
+}
+
+static int
+xp_cpu_to_nasid_uv(int cpuid)
+{
+	/* ??? Is this same as sn2 nasid in mach/part bitmaps set up by SAL? */
+	return UV_PNODE_TO_NASID(uv_cpu_to_pnode(cpuid));
+}
+
+enum xp_retval
+xp_init_uv(void)
+{
+	BUG_ON(!is_uv());
+
+	xp_max_npartitions = XP_MAX_NPARTITIONS_UV;
+	xp_partition_id = 0;	/* !!! not correct value */
+	xp_region_size = 0;	/* !!! not correct value */
+
+	xp_pa = xp_pa_uv;
+	xp_remote_memcpy = xp_remote_memcpy_uv;
+	xp_cpu_to_nasid = xp_cpu_to_nasid_uv;
+
+	return xpSuccess;
+}
+
+void
+xp_exit_uv(void)
+{
+	BUG_ON(!is_uv());
+}
diff --git a/drivers/misc/sgi-xp/xpc.h b/drivers/misc/sgi-xp/xpc.h
index 11ac267ed68f..619208d61862 100644
--- a/drivers/misc/sgi-xp/xpc.h
+++ b/drivers/misc/sgi-xp/xpc.h
@@ -13,18 +13,10 @@
 #ifndef _DRIVERS_MISC_SGIXP_XPC_H
 #define _DRIVERS_MISC_SGIXP_XPC_H
 
-#include <linux/interrupt.h>
-#include <linux/sysctl.h>
-#include <linux/device.h>
-#include <linux/mutex.h>
+#include <linux/wait.h>
 #include <linux/completion.h>
-#include <asm/pgtable.h>
-#include <asm/processor.h>
-#include <asm/sn/bte.h>
-#include <asm/sn/clksupport.h>
-#include <asm/sn/addrs.h>
-#include <asm/sn/mspec.h>
-#include <asm/sn/shub_mmr.h>
+#include <linux/timer.h>
+#include <linux/sched.h>
 #include "xp.h"
 
 /*
@@ -36,23 +28,7 @@
 #define XPC_VERSION_MAJOR(_v)		((_v) >> 4)
 #define XPC_VERSION_MINOR(_v)		((_v) & 0xf)
 
-/*
- * The next macros define word or bit representations for given
- * C-brick nasid in either the SAL provided bit array representing
- * nasids in the partition/machine or the AMO_t array used for
- * inter-partition initiation communications.
- *
- * For SN2 machines, C-Bricks are alway even numbered NASIDs.  As
- * such, some space will be saved by insisting that nasid information
- * passed from SAL always be packed for C-Bricks and the
- * cross-partition interrupts use the same packing scheme.
- */
-#define XPC_NASID_W_INDEX(_n)	(((_n) / 64) / 2)
-#define XPC_NASID_B_INDEX(_n)	(((_n) / 2) & (64 - 1))
-#define XPC_NASID_IN_ARRAY(_n, _p) ((_p)[XPC_NASID_W_INDEX(_n)] & \
-				    (1UL << XPC_NASID_B_INDEX(_n)))
-#define XPC_NASID_FROM_W_B(_w, _b) (((_w) * 64 + (_b)) * 2)
-
+/* define frequency of the heartbeat and frequency how often it's checked */
 #define XPC_HB_DEFAULT_INTERVAL		5	/* incr HB every x secs */
 #define XPC_HB_CHECK_DEFAULT_INTERVAL	20	/* check HB every x secs */
 
@@ -72,11 +48,11 @@
  *
  *   reserved page header
  *
- *     The first cacheline of the reserved page contains the header
- *     (struct xpc_rsvd_page). Before SAL initialization has completed,
+ *     The first two 64-byte cachelines of the reserved page contain the
+ *     header (struct xpc_rsvd_page). Before SAL initialization has completed,
  *     SAL has set up the following fields of the reserved page header:
- *     SAL_signature, SAL_version, partid, and nasids_size. The other
- *     fields are set up by XPC. (xpc_rsvd_page points to the local
+ *     SAL_signature, SAL_version, SAL_partid, and SAL_nasids_size. The
+ *     other fields are set up by XPC. (xpc_rsvd_page points to the local
  *     partition's reserved page.)
  *
  *   part_nasids mask
@@ -87,14 +63,16 @@
  *     the actual nasids in the entire machine (mach_nasids). We're only
  *     interested in the even numbered nasids (which contain the processors
  *     and/or memory), so we only need half as many bits to represent the
- *     nasids. The part_nasids mask is located starting at the first cacheline
- *     following the reserved page header. The mach_nasids mask follows right
- *     after the part_nasids mask. The size in bytes of each mask is reflected
- *     by the reserved page header field 'nasids_size'. (Local partition's
- *     mask pointers are xpc_part_nasids and xpc_mach_nasids.)
+ *     nasids. When mapping nasid to bit in a mask (or bit to nasid) be sure
+ *     to either divide or multiply by 2. The part_nasids mask is located
+ *     starting at the first cacheline following the reserved page header. The
+ *     mach_nasids mask follows right after the part_nasids mask. The size in
+ *     bytes of each mask is reflected by the reserved page header field
+ *     'SAL_nasids_size'. (Local partition's mask pointers are xpc_part_nasids
+ *     and xpc_mach_nasids.)
  *
- *   vars
- *   vars part
+ *   vars	(ia64-sn2 only)
+ *   vars part	(ia64-sn2 only)
  *
  *     Immediately following the mach_nasids mask are the XPC variables
  *     required by other partitions. First are those that are generic to all
@@ -102,43 +80,26 @@
  *     which are partition specific (vars part). These are setup by XPC.
  *     (Local partition's vars pointers are xpc_vars and xpc_vars_part.)
  *
- * Note: Until vars_pa is set, the partition XPC code has not been initialized.
+ * Note: Until 'ts_jiffies' is set non-zero, the partition XPC code has not been
+ *       initialized.
  */
 struct xpc_rsvd_page {
 	u64 SAL_signature;	/* SAL: unique signature */
 	u64 SAL_version;	/* SAL: version */
-	u8 partid;		/* SAL: partition ID */
+	short SAL_partid;	/* SAL: partition ID */
+	short max_npartitions;	/* value of XPC_MAX_PARTITIONS */
 	u8 version;
-	u8 pad1[6];		/* align to next u64 in cacheline */
-	u64 vars_pa;		/* physical address of struct xpc_vars */
-	struct timespec stamp;	/* time when reserved page was setup by XPC */
-	u64 pad2[9];		/* align to last u64 in cacheline */
-	u64 nasids_size;	/* SAL: size of each nasid mask in bytes */
+	u8 pad1[3];		/* align to next u64 in 1st 64-byte cacheline */
+	union {
+		unsigned long vars_pa;	/* phys address of struct xpc_vars */
+		unsigned long activate_mq_gpa; /* gru phy addr of activate_mq */
+	} sn;
+	unsigned long ts_jiffies; /* timestamp when rsvd pg was setup by XPC */
+	u64 pad2[10];		/* align to last u64 in 2nd 64-byte cacheline */
+	u64 SAL_nasids_size;	/* SAL: size of each nasid mask in bytes */
 };
 
-#define XPC_RP_VERSION _XPC_VERSION(1, 1) /* version 1.1 of the reserved page */
-
-#define XPC_SUPPORTS_RP_STAMP(_version) \
-			(_version >= _XPC_VERSION(1, 1))
-
-/*
- * compare stamps - the return value is:
- *
- *	< 0,	if stamp1 < stamp2
- *	= 0,	if stamp1 == stamp2
- *	> 0,	if stamp1 > stamp2
- */
-static inline int
-xpc_compare_stamps(struct timespec *stamp1, struct timespec *stamp2)
-{
-	int ret;
-
-	ret = stamp1->tv_sec - stamp2->tv_sec;
-	if (ret == 0)
-		ret = stamp1->tv_nsec - stamp2->tv_nsec;
-
-	return ret;
-}
+#define XPC_RP_VERSION _XPC_VERSION(2, 0) /* version 2.0 of the reserved page */
 
 /*
  * Define the structures by which XPC variables can be exported to other
@@ -154,85 +115,40 @@ xpc_compare_stamps(struct timespec *stamp1, struct timespec *stamp2)
  * reflected by incrementing either the major or minor version numbers
  * of struct xpc_vars.
  */
-struct xpc_vars {
+struct xpc_vars_sn2 {
 	u8 version;
 	u64 heartbeat;
-	u64 heartbeating_to_mask;
+	DECLARE_BITMAP(heartbeating_to_mask, XP_MAX_NPARTITIONS_SN2);
 	u64 heartbeat_offline;	/* if 0, heartbeat should be changing */
-	int act_nasid;
-	int act_phys_cpuid;
-	u64 vars_part_pa;
-	u64 amos_page_pa;	/* paddr of page of AMOs from MSPEC driver */
-	AMO_t *amos_page;	/* vaddr of page of AMOs from MSPEC driver */
+	int activate_IRQ_nasid;
+	int activate_IRQ_phys_cpuid;
+	unsigned long vars_part_pa;
+	unsigned long amos_page_pa;/* paddr of page of amos from MSPEC driver */
+	struct amo *amos_page;	/* vaddr of page of amos from MSPEC driver */
 };
 
 #define XPC_V_VERSION _XPC_VERSION(3, 1)    /* version 3.1 of the cross vars */
 
-#define XPC_SUPPORTS_DISENGAGE_REQUEST(_version) \
-			(_version >= _XPC_VERSION(3, 1))
-
-static inline int
-xpc_hb_allowed(short partid, struct xpc_vars *vars)
-{
-	return ((vars->heartbeating_to_mask & (1UL << partid)) != 0);
-}
-
-static inline void
-xpc_allow_hb(short partid, struct xpc_vars *vars)
-{
-	u64 old_mask, new_mask;
-
-	do {
-		old_mask = vars->heartbeating_to_mask;
-		new_mask = (old_mask | (1UL << partid));
-	} while (cmpxchg(&vars->heartbeating_to_mask, old_mask, new_mask) !=
-		 old_mask);
-}
-
-static inline void
-xpc_disallow_hb(short partid, struct xpc_vars *vars)
-{
-	u64 old_mask, new_mask;
-
-	do {
-		old_mask = vars->heartbeating_to_mask;
-		new_mask = (old_mask & ~(1UL << partid));
-	} while (cmpxchg(&vars->heartbeating_to_mask, old_mask, new_mask) !=
-		 old_mask);
-}
-
-/*
- * The AMOs page consists of a number of AMO variables which are divided into
- * four groups, The first two groups are used to identify an IRQ's sender.
- * These two groups consist of 64 and 128 AMO variables respectively. The last
- * two groups, consisting of just one AMO variable each, are used to identify
- * the remote partitions that are currently engaged (from the viewpoint of
- * the XPC running on the remote partition).
- */
-#define XPC_NOTIFY_IRQ_AMOS	   0
-#define XPC_ACTIVATE_IRQ_AMOS	   (XPC_NOTIFY_IRQ_AMOS + XP_MAX_PARTITIONS)
-#define XPC_ENGAGED_PARTITIONS_AMO (XPC_ACTIVATE_IRQ_AMOS + XP_NASID_MASK_WORDS)
-#define XPC_DISENGAGE_REQUEST_AMO  (XPC_ENGAGED_PARTITIONS_AMO + 1)
-
 /*
  * The following structure describes the per partition specific variables.
  *
  * An array of these structures, one per partition, will be defined. As a
  * partition becomes active XPC will copy the array entry corresponding to
- * itself from that partition. It is desirable that the size of this
- * structure evenly divide into a cacheline, such that none of the entries
- * in this array crosses a cacheline boundary. As it is now, each entry
- * occupies half a cacheline.
+ * itself from that partition. It is desirable that the size of this structure
+ * evenly divides into a 128-byte cacheline, such that none of the entries in
+ * this array crosses a 128-byte cacheline boundary. As it is now, each entry
+ * occupies 64-bytes.
  */
-struct xpc_vars_part {
+struct xpc_vars_part_sn2 {
 	u64 magic;
 
-	u64 openclose_args_pa;	/* physical address of open and close args */
-	u64 GPs_pa;		/* physical address of Get/Put values */
+	unsigned long openclose_args_pa; /* phys addr of open and close args */
+	unsigned long GPs_pa;	/* physical address of Get/Put values */
+
+	unsigned long chctl_amo_pa; /* physical address of chctl flags' amo */
 
-	u64 IPI_amo_pa;		/* physical address of IPI AMO_t structure */
-	int IPI_nasid;		/* nasid of where to send IPIs */
-	int IPI_phys_cpuid;	/* physical CPU ID of where to send IPIs */
+	int notify_IRQ_nasid;	/* nasid of where to send notify IRQs */
+	int notify_IRQ_phys_cpuid;	/* CPUID of where to send notify IRQs */
 
 	u8 nchannels;		/* #of defined channels supported */
 
@@ -248,20 +164,95 @@ struct xpc_vars_part {
  * MAGIC2 indicates that this partition has pulled the remote partititions
  * per partition variables that pertain to this partition.
  */
-#define XPC_VP_MAGIC1	0x0053524156435058L   /* 'XPCVARS\0'L (little endian) */
-#define XPC_VP_MAGIC2	0x0073726176435058L   /* 'XPCvars\0'L (little endian) */
+#define XPC_VP_MAGIC1_SN2 0x0053524156435058L /* 'XPCVARS\0'L (little endian) */
+#define XPC_VP_MAGIC2_SN2 0x0073726176435058L /* 'XPCvars\0'L (little endian) */
 
 /* the reserved page sizes and offsets */
 
 #define XPC_RP_HEADER_SIZE	L1_CACHE_ALIGN(sizeof(struct xpc_rsvd_page))
-#define XPC_RP_VARS_SIZE	L1_CACHE_ALIGN(sizeof(struct xpc_vars))
+#define XPC_RP_VARS_SIZE	L1_CACHE_ALIGN(sizeof(struct xpc_vars_sn2))
 
-#define XPC_RP_PART_NASIDS(_rp) ((u64 *)((u8 *)(_rp) + XPC_RP_HEADER_SIZE))
-#define XPC_RP_MACH_NASIDS(_rp) (XPC_RP_PART_NASIDS(_rp) + xp_nasid_mask_words)
-#define XPC_RP_VARS(_rp)	((struct xpc_vars *)(XPC_RP_MACH_NASIDS(_rp) + \
-				    xp_nasid_mask_words))
-#define XPC_RP_VARS_PART(_rp)	((struct xpc_vars_part *) \
-				    ((u8 *)XPC_RP_VARS(_rp) + XPC_RP_VARS_SIZE))
+#define XPC_RP_PART_NASIDS(_rp) ((unsigned long *)((u8 *)(_rp) + \
+				 XPC_RP_HEADER_SIZE))
+#define XPC_RP_MACH_NASIDS(_rp) (XPC_RP_PART_NASIDS(_rp) + \
+				 xpc_nasid_mask_nlongs)
+#define XPC_RP_VARS(_rp)	((struct xpc_vars_sn2 *) \
+				 (XPC_RP_MACH_NASIDS(_rp) + \
+				  xpc_nasid_mask_nlongs))
+
+/*
+ * The activate_mq is used to send/receive GRU messages that affect XPC's
+ * heartbeat, partition active state, and channel state. This is UV only.
+ */
+struct xpc_activate_mq_msghdr_uv {
+	short partid;		/* sender's partid */
+	u8 act_state;		/* sender's act_state at time msg sent */
+	u8 type;		/* message's type */
+	unsigned long rp_ts_jiffies; /* timestamp of sender's rp setup by XPC */
+};
+
+/* activate_mq defined message types */
+#define XPC_ACTIVATE_MQ_MSG_SYNC_ACT_STATE_UV		0
+#define XPC_ACTIVATE_MQ_MSG_INC_HEARTBEAT_UV		1
+#define XPC_ACTIVATE_MQ_MSG_OFFLINE_HEARTBEAT_UV	2
+#define XPC_ACTIVATE_MQ_MSG_ONLINE_HEARTBEAT_UV		3
+
+#define XPC_ACTIVATE_MQ_MSG_ACTIVATE_REQ_UV		4
+#define XPC_ACTIVATE_MQ_MSG_DEACTIVATE_REQ_UV		5
+
+#define XPC_ACTIVATE_MQ_MSG_CHCTL_CLOSEREQUEST_UV	6
+#define XPC_ACTIVATE_MQ_MSG_CHCTL_CLOSEREPLY_UV		7
+#define XPC_ACTIVATE_MQ_MSG_CHCTL_OPENREQUEST_UV	8
+#define XPC_ACTIVATE_MQ_MSG_CHCTL_OPENREPLY_UV		9
+
+#define XPC_ACTIVATE_MQ_MSG_MARK_ENGAGED_UV		10
+#define XPC_ACTIVATE_MQ_MSG_MARK_DISENGAGED_UV		11
+
+struct xpc_activate_mq_msg_uv {
+	struct xpc_activate_mq_msghdr_uv hdr;
+};
+
+struct xpc_activate_mq_msg_heartbeat_req_uv {
+	struct xpc_activate_mq_msghdr_uv hdr;
+	u64 heartbeat;
+};
+
+struct xpc_activate_mq_msg_activate_req_uv {
+	struct xpc_activate_mq_msghdr_uv hdr;
+	unsigned long rp_gpa;
+	unsigned long activate_mq_gpa;
+};
+
+struct xpc_activate_mq_msg_deactivate_req_uv {
+	struct xpc_activate_mq_msghdr_uv hdr;
+	enum xp_retval reason;
+};
+
+struct xpc_activate_mq_msg_chctl_closerequest_uv {
+	struct xpc_activate_mq_msghdr_uv hdr;
+	short ch_number;
+	enum xp_retval reason;
+};
+
+struct xpc_activate_mq_msg_chctl_closereply_uv {
+	struct xpc_activate_mq_msghdr_uv hdr;
+	short ch_number;
+};
+
+struct xpc_activate_mq_msg_chctl_openrequest_uv {
+	struct xpc_activate_mq_msghdr_uv hdr;
+	short ch_number;
+	short entry_size;	/* size of notify_mq's GRU messages */
+	short local_nentries;	/* ??? Is this needed? What is? */
+};
+
+struct xpc_activate_mq_msg_chctl_openreply_uv {
+	struct xpc_activate_mq_msghdr_uv hdr;
+	short ch_number;
+	short remote_nentries;	/* ??? Is this needed? What is? */
+	short local_nentries;	/* ??? Is this needed? What is? */
+	unsigned long local_notify_mq_gpa;
+};
 
 /*
  * Functions registered by add_timer() or called by kernel_thread() only
@@ -270,22 +261,22 @@ struct xpc_vars_part {
  * the passed argument.
  */
 #define XPC_PACK_ARGS(_arg1, _arg2) \
-			((((u64) _arg1) & 0xffffffff) | \
-			((((u64) _arg2) & 0xffffffff) << 32))
+			((((u64)_arg1) & 0xffffffff) | \
+			((((u64)_arg2) & 0xffffffff) << 32))
 
-#define XPC_UNPACK_ARG1(_args)	(((u64) _args) & 0xffffffff)
-#define XPC_UNPACK_ARG2(_args)	((((u64) _args) >> 32) & 0xffffffff)
+#define XPC_UNPACK_ARG1(_args)	(((u64)_args) & 0xffffffff)
+#define XPC_UNPACK_ARG2(_args)	((((u64)_args) >> 32) & 0xffffffff)
 
 /*
  * Define a Get/Put value pair (pointers) used with a message queue.
  */
-struct xpc_gp {
+struct xpc_gp_sn2 {
 	s64 get;		/* Get value */
 	s64 put;		/* Put value */
 };
 
 #define XPC_GP_SIZE \
-		L1_CACHE_ALIGN(sizeof(struct xpc_gp) * XPC_NCHANNELS)
+		L1_CACHE_ALIGN(sizeof(struct xpc_gp_sn2) * XPC_MAX_NCHANNELS)
 
 /*
  * Define a structure that contains arguments associated with opening and
@@ -293,31 +284,89 @@ struct xpc_gp {
  */
 struct xpc_openclose_args {
 	u16 reason;		/* reason why channel is closing */
-	u16 msg_size;		/* sizeof each message entry */
+	u16 entry_size;		/* sizeof each message entry */
 	u16 remote_nentries;	/* #of message entries in remote msg queue */
 	u16 local_nentries;	/* #of message entries in local msg queue */
-	u64 local_msgqueue_pa;	/* physical address of local message queue */
+	unsigned long local_msgqueue_pa; /* phys addr of local message queue */
 };
 
 #define XPC_OPENCLOSE_ARGS_SIZE \
-	      L1_CACHE_ALIGN(sizeof(struct xpc_openclose_args) * XPC_NCHANNELS)
+	      L1_CACHE_ALIGN(sizeof(struct xpc_openclose_args) * \
+	      XPC_MAX_NCHANNELS)
 
-/* struct xpc_msg flags */
 
-#define	XPC_M_DONE		0x01	/* msg has been received/consumed */
-#define	XPC_M_READY		0x02	/* msg is ready to be sent */
-#define	XPC_M_INTERRUPT		0x04	/* send interrupt when msg consumed */
+/*
+ * Structures to define a fifo singly-linked list.
+ */
 
-#define XPC_MSG_ADDRESS(_payload) \
-		((struct xpc_msg *)((u8 *)(_payload) - XPC_MSG_PAYLOAD_OFFSET))
+struct xpc_fifo_entry_uv {
+	struct xpc_fifo_entry_uv *next;
+};
+
+struct xpc_fifo_head_uv {
+	struct xpc_fifo_entry_uv *first;
+	struct xpc_fifo_entry_uv *last;
+	spinlock_t lock;
+	int n_entries;
+};
 
 /*
- * Defines notify entry.
+ * Define a sn2 styled message.
+ *
+ * A user-defined message resides in the payload area. The max size of the
+ * payload is defined by the user via xpc_connect().
+ *
+ * The size of a message entry (within a message queue) must be a 128-byte
+ * cacheline sized multiple in order to facilitate the BTE transfer of messages
+ * from one message queue to another.
+ */
+struct xpc_msg_sn2 {
+	u8 flags;		/* FOR XPC INTERNAL USE ONLY */
+	u8 reserved[7];		/* FOR XPC INTERNAL USE ONLY */
+	s64 number;		/* FOR XPC INTERNAL USE ONLY */
+
+	u64 payload;		/* user defined portion of message */
+};
+
+/* struct xpc_msg_sn2 flags */
+
+#define	XPC_M_SN2_DONE		0x01	/* msg has been received/consumed */
+#define	XPC_M_SN2_READY		0x02	/* msg is ready to be sent */
+#define	XPC_M_SN2_INTERRUPT	0x04	/* send interrupt when msg consumed */
+
+/*
+ * The format of a uv XPC notify_mq GRU message is as follows:
+ *
+ * A user-defined message resides in the payload area. The max size of the
+ * payload is defined by the user via xpc_connect().
+ *
+ * The size of a message (payload and header) sent via the GRU must be either 1
+ * or 2 GRU_CACHE_LINE_BYTES in length.
+ */
+
+struct xpc_notify_mq_msghdr_uv {
+	union {
+		unsigned int gru_msg_hdr;	/* FOR GRU INTERNAL USE ONLY */
+		struct xpc_fifo_entry_uv next;	/* FOR XPC INTERNAL USE ONLY */
+	} u;
+	short partid;		/* FOR XPC INTERNAL USE ONLY */
+	u8 ch_number;		/* FOR XPC INTERNAL USE ONLY */
+	u8 size;		/* FOR XPC INTERNAL USE ONLY */
+	unsigned int msg_slot_number;	/* FOR XPC INTERNAL USE ONLY */
+};
+
+struct xpc_notify_mq_msg_uv {
+	struct xpc_notify_mq_msghdr_uv hdr;
+	unsigned long payload;
+};
+
+/*
+ * Define sn2's notify entry.
  *
  * This is used to notify a message's sender that their message was received
  * and consumed by the intended recipient.
  */
-struct xpc_notify {
+struct xpc_notify_sn2 {
 	u8 type;		/* type of notification */
 
 	/* the following two fields are only used if type == XPC_N_CALL */
@@ -325,9 +374,20 @@ struct xpc_notify {
 	void *key;		/* pointer to user's key */
 };
 
-/* struct xpc_notify type of notification */
+/* struct xpc_notify_sn2 type of notification */
+
+#define	XPC_N_CALL	0x01	/* notify function provided by user */
 
-#define	XPC_N_CALL		0x01	/* notify function provided by user */
+/*
+ * Define uv's version of the notify entry. It additionally is used to allocate
+ * a msg slot on the remote partition into which is copied a sent message.
+ */
+struct xpc_send_msg_slot_uv {
+	struct xpc_fifo_entry_uv next;
+	unsigned int msg_slot_number;
+	xpc_notify_func func;	/* user's notify function */
+	void *key;		/* pointer to user's key */
+};
 
 /*
  * Define the structure that manages all the stuff required by a channel. In
@@ -339,8 +399,12 @@ struct xpc_notify {
  * There is an array of these structures for each remote partition. It is
  * allocated at the time a partition becomes active. The array contains one
  * of these structures for each potential channel connection to that partition.
+ */
+
+/*
+ * The following is sn2 only.
  *
- * Each of these structures manages two message queues (circular buffers).
+ * Each channel structure manages two message queues (circular buffers).
  * They are allocated at the time a channel connection is made. One of
  * these message queues (local_msgqueue) holds the locally created messages
  * that are destined for the remote partition. The other of these message
@@ -407,58 +471,72 @@ struct xpc_notify {
  *	new messages, by the clearing of the message flags of the acknowledged
  *	messages.
  */
+
+struct xpc_channel_sn2 {
+	struct xpc_openclose_args *local_openclose_args; /* args passed on */
+					     /* opening or closing of channel */
+
+	void *local_msgqueue_base;	/* base address of kmalloc'd space */
+	struct xpc_msg_sn2 *local_msgqueue;	/* local message queue */
+	void *remote_msgqueue_base;	/* base address of kmalloc'd space */
+	struct xpc_msg_sn2 *remote_msgqueue; /* cached copy of remote */
+					   /* partition's local message queue */
+	unsigned long remote_msgqueue_pa; /* phys addr of remote partition's */
+					  /* local message queue */
+
+	struct xpc_notify_sn2 *notify_queue;/* notify queue for messages sent */
+
+	/* various flavors of local and remote Get/Put values */
+
+	struct xpc_gp_sn2 *local_GP;	/* local Get/Put values */
+	struct xpc_gp_sn2 remote_GP;	/* remote Get/Put values */
+	struct xpc_gp_sn2 w_local_GP;	/* working local Get/Put values */
+	struct xpc_gp_sn2 w_remote_GP;	/* working remote Get/Put values */
+	s64 next_msg_to_pull;	/* Put value of next msg to pull */
+
+	struct mutex msg_to_pull_mutex;	/* next msg to pull serialization */
+};
+
+struct xpc_channel_uv {
+	unsigned long remote_notify_mq_gpa;	/* gru phys address of remote */
+						/* partition's notify mq */
+
+	struct xpc_send_msg_slot_uv *send_msg_slots;
+	struct xpc_notify_mq_msg_uv *recv_msg_slots;
+
+	struct xpc_fifo_head_uv msg_slot_free_list;
+	struct xpc_fifo_head_uv recv_msg_list;	/* deliverable payloads */
+};
+
 struct xpc_channel {
 	short partid;		/* ID of remote partition connected */
 	spinlock_t lock;	/* lock for updating this structure */
-	u32 flags;		/* general flags */
+	unsigned int flags;	/* general flags */
 
 	enum xp_retval reason;	/* reason why channel is disconnect'g */
 	int reason_line;	/* line# disconnect initiated from */
 
 	u16 number;		/* channel # */
 
-	u16 msg_size;		/* sizeof each msg entry */
+	u16 entry_size;		/* sizeof each msg entry */
 	u16 local_nentries;	/* #of msg entries in local msg queue */
 	u16 remote_nentries;	/* #of msg entries in remote msg queue */
 
-	void *local_msgqueue_base;	/* base address of kmalloc'd space */
-	struct xpc_msg *local_msgqueue;	/* local message queue */
-	void *remote_msgqueue_base;	/* base address of kmalloc'd space */
-	struct xpc_msg *remote_msgqueue; /* cached copy of remote partition's */
-					 /* local message queue */
-	u64 remote_msgqueue_pa;	/* phys addr of remote partition's */
-				/* local message queue */
-
 	atomic_t references;	/* #of external references to queues */
 
 	atomic_t n_on_msg_allocate_wq;	/* #on msg allocation wait queue */
 	wait_queue_head_t msg_allocate_wq;	/* msg allocation wait queue */
 
-	u8 delayed_IPI_flags;	/* IPI flags received, but delayed */
+	u8 delayed_chctl_flags;	/* chctl flags received, but delayed */
 				/* action until channel disconnected */
 
-	/* queue of msg senders who want to be notified when msg received */
-
 	atomic_t n_to_notify;	/* #of msg senders to notify */
-	struct xpc_notify *notify_queue;    /* notify queue for messages sent */
 
 	xpc_channel_func func;	/* user's channel function */
 	void *key;		/* pointer to user's key */
 
-	struct mutex msg_to_pull_mutex;	/* next msg to pull serialization */
 	struct completion wdisconnect_wait;    /* wait for channel disconnect */
 
-	struct xpc_openclose_args *local_openclose_args; /* args passed on */
-					     /* opening or closing of channel */
-
-	/* various flavors of local and remote Get/Put values */
-
-	struct xpc_gp *local_GP;	/* local Get/Put values */
-	struct xpc_gp remote_GP;	/* remote Get/Put values */
-	struct xpc_gp w_local_GP;	/* working local Get/Put values */
-	struct xpc_gp w_remote_GP;	/* working remote Get/Put values */
-	s64 next_msg_to_pull;	/* Put value of next msg to pull */
-
 	/* kthread management related fields */
 
 	atomic_t kthreads_assigned;	/* #of kthreads assigned to channel */
@@ -469,6 +547,11 @@ struct xpc_channel {
 
 	wait_queue_head_t idle_wq;	/* idle kthread wait queue */
 
+	union {
+		struct xpc_channel_sn2 sn2;
+		struct xpc_channel_uv uv;
+	} sn;
+
 } ____cacheline_aligned;
 
 /* struct xpc_channel flags */
@@ -501,33 +584,128 @@ struct xpc_channel {
 #define	XPC_C_WDISCONNECT	0x00040000  /* waiting for channel disconnect */
 
 /*
- * Manages channels on a partition basis. There is one of these structures
+ * The channel control flags (chctl) union consists of a 64-bit variable which
+ * is divided up into eight bytes, ordered from right to left. Byte zero
+ * pertains to channel 0, byte one to channel 1, and so on. Each channel's byte
+ * can have one or more of the chctl flags set in it.
+ */
+
+union xpc_channel_ctl_flags {
+	u64 all_flags;
+	u8 flags[XPC_MAX_NCHANNELS];
+};
+
+/* chctl flags */
+#define	XPC_CHCTL_CLOSEREQUEST	0x01
+#define	XPC_CHCTL_CLOSEREPLY	0x02
+#define	XPC_CHCTL_OPENREQUEST	0x04
+#define	XPC_CHCTL_OPENREPLY	0x08
+#define	XPC_CHCTL_MSGREQUEST	0x10
+
+#define XPC_OPENCLOSE_CHCTL_FLAGS \
+			(XPC_CHCTL_CLOSEREQUEST | XPC_CHCTL_CLOSEREPLY | \
+			 XPC_CHCTL_OPENREQUEST | XPC_CHCTL_OPENREPLY)
+#define XPC_MSG_CHCTL_FLAGS	XPC_CHCTL_MSGREQUEST
+
+static inline int
+xpc_any_openclose_chctl_flags_set(union xpc_channel_ctl_flags *chctl)
+{
+	int ch_number;
+
+	for (ch_number = 0; ch_number < XPC_MAX_NCHANNELS; ch_number++) {
+		if (chctl->flags[ch_number] & XPC_OPENCLOSE_CHCTL_FLAGS)
+			return 1;
+	}
+	return 0;
+}
+
+static inline int
+xpc_any_msg_chctl_flags_set(union xpc_channel_ctl_flags *chctl)
+{
+	int ch_number;
+
+	for (ch_number = 0; ch_number < XPC_MAX_NCHANNELS; ch_number++) {
+		if (chctl->flags[ch_number] & XPC_MSG_CHCTL_FLAGS)
+			return 1;
+	}
+	return 0;
+}
+
+/*
+ * Manage channels on a partition basis. There is one of these structures
  * for each partition (a partition will never utilize the structure that
  * represents itself).
  */
+
+struct xpc_partition_sn2 {
+	unsigned long remote_amos_page_pa; /* paddr of partition's amos page */
+	int activate_IRQ_nasid;	/* active partition's act/deact nasid */
+	int activate_IRQ_phys_cpuid;	/* active part's act/deact phys cpuid */
+
+	unsigned long remote_vars_pa;	/* phys addr of partition's vars */
+	unsigned long remote_vars_part_pa; /* paddr of partition's vars part */
+	u8 remote_vars_version;	/* version# of partition's vars */
+
+	void *local_GPs_base;	/* base address of kmalloc'd space */
+	struct xpc_gp_sn2 *local_GPs;	/* local Get/Put values */
+	void *remote_GPs_base;	/* base address of kmalloc'd space */
+	struct xpc_gp_sn2 *remote_GPs;	/* copy of remote partition's local */
+					/* Get/Put values */
+	unsigned long remote_GPs_pa; /* phys addr of remote partition's local */
+				     /* Get/Put values */
+
+	void *local_openclose_args_base;   /* base address of kmalloc'd space */
+	struct xpc_openclose_args *local_openclose_args;      /* local's args */
+	unsigned long remote_openclose_args_pa;	/* phys addr of remote's args */
+
+	int notify_IRQ_nasid;	/* nasid of where to send notify IRQs */
+	int notify_IRQ_phys_cpuid;	/* CPUID of where to send notify IRQs */
+	char notify_IRQ_owner[8];	/* notify IRQ's owner's name */
+
+	struct amo *remote_chctl_amo_va; /* addr of remote chctl flags' amo */
+	struct amo *local_chctl_amo_va;	/* address of chctl flags' amo */
+
+	struct timer_list dropped_notify_IRQ_timer;	/* dropped IRQ timer */
+};
+
+struct xpc_partition_uv {
+	unsigned long remote_activate_mq_gpa;	/* gru phys address of remote */
+						/* partition's activate mq */
+	spinlock_t flags_lock;	/* protect updating of flags */
+	unsigned int flags;	/* general flags */
+	u8 remote_act_state;	/* remote partition's act_state */
+	u8 act_state_req;	/* act_state request from remote partition */
+	enum xp_retval reason;	/* reason for deactivate act_state request */
+	u64 heartbeat;		/* incremented by remote partition */
+};
+
+/* struct xpc_partition_uv flags */
+
+#define XPC_P_HEARTBEAT_OFFLINE_UV	0x00000001
+#define XPC_P_ENGAGED_UV		0x00000002
+
+/* struct xpc_partition_uv act_state change requests */
+
+#define XPC_P_ASR_ACTIVATE_UV		0x01
+#define XPC_P_ASR_REACTIVATE_UV		0x02
+#define XPC_P_ASR_DEACTIVATE_UV		0x03
+
 struct xpc_partition {
 
 	/* XPC HB infrastructure */
 
 	u8 remote_rp_version;	/* version# of partition's rsvd pg */
-	struct timespec remote_rp_stamp; /* time when rsvd pg was initialized */
-	u64 remote_rp_pa;	/* phys addr of partition's rsvd pg */
-	u64 remote_vars_pa;	/* phys addr of partition's vars */
-	u64 remote_vars_part_pa;	/* phys addr of partition's vars part */
+	unsigned long remote_rp_ts_jiffies; /* timestamp when rsvd pg setup */
+	unsigned long remote_rp_pa;	/* phys addr of partition's rsvd pg */
 	u64 last_heartbeat;	/* HB at last read */
-	u64 remote_amos_page_pa;	/* phys addr of partition's amos page */
-	int remote_act_nasid;	/* active part's act/deact nasid */
-	int remote_act_phys_cpuid;	/* active part's act/deact phys cpuid */
-	u32 act_IRQ_rcvd;	/* IRQs since activation */
+	u32 activate_IRQ_rcvd;	/* IRQs since activation */
 	spinlock_t act_lock;	/* protect updating of act_state */
 	u8 act_state;		/* from XPC HB viewpoint */
-	u8 remote_vars_version;	/* version# of partition's vars */
 	enum xp_retval reason;	/* reason partition is deactivating */
 	int reason_line;	/* line# deactivation initiated from */
-	int reactivate_nasid;	/* nasid in partition to reactivate */
 
-	unsigned long disengage_request_timeout;	/* timeout in jiffies */
-	struct timer_list disengage_request_timer;
+	unsigned long disengage_timeout;	/* timeout in jiffies */
+	struct timer_list disengage_timer;
 
 	/* XPC infrastructure referencing and teardown control */
 
@@ -535,85 +713,63 @@ struct xpc_partition {
 	wait_queue_head_t teardown_wq;	/* kthread waiting to teardown infra */
 	atomic_t references;	/* #of references to infrastructure */
 
-	/*
-	 * NONE OF THE PRECEDING FIELDS OF THIS STRUCTURE WILL BE CLEARED WHEN
-	 * XPC SETS UP THE NECESSARY INFRASTRUCTURE TO SUPPORT CROSS PARTITION
-	 * COMMUNICATION. ALL OF THE FOLLOWING FIELDS WILL BE CLEARED. (THE
-	 * 'nchannels' FIELD MUST BE THE FIRST OF THE FIELDS TO BE CLEARED.)
-	 */
-
 	u8 nchannels;		/* #of defined channels supported */
 	atomic_t nchannels_active;  /* #of channels that are not DISCONNECTED */
 	atomic_t nchannels_engaged;  /* #of channels engaged with remote part */
 	struct xpc_channel *channels;	/* array of channel structures */
 
-	void *local_GPs_base;	/* base address of kmalloc'd space */
-	struct xpc_gp *local_GPs;	/* local Get/Put values */
-	void *remote_GPs_base;	/* base address of kmalloc'd space */
-	struct xpc_gp *remote_GPs;	/* copy of remote partition's local */
-					/* Get/Put values */
-	u64 remote_GPs_pa;	/* phys address of remote partition's local */
-				/* Get/Put values */
+	/* fields used for managing channel avialability and activity */
 
-	/* fields used to pass args when opening or closing a channel */
+	union xpc_channel_ctl_flags chctl; /* chctl flags yet to be processed */
+	spinlock_t chctl_lock;	/* chctl flags lock */
 
-	void *local_openclose_args_base;   /* base address of kmalloc'd space */
-	struct xpc_openclose_args *local_openclose_args;      /* local's args */
 	void *remote_openclose_args_base;  /* base address of kmalloc'd space */
 	struct xpc_openclose_args *remote_openclose_args; /* copy of remote's */
 							  /* args */
-	u64 remote_openclose_args_pa;	/* phys addr of remote's args */
-
-	/* IPI sending, receiving and handling related fields */
-
-	int remote_IPI_nasid;	/* nasid of where to send IPIs */
-	int remote_IPI_phys_cpuid;	/* phys CPU ID of where to send IPIs */
-	AMO_t *remote_IPI_amo_va;    /* address of remote IPI AMO_t structure */
-
-	AMO_t *local_IPI_amo_va;	/* address of IPI AMO_t structure */
-	u64 local_IPI_amo;	/* IPI amo flags yet to be handled */
-	char IPI_owner[8];	/* IPI owner's name */
-	struct timer_list dropped_IPI_timer;	/* dropped IPI timer */
-
-	spinlock_t IPI_lock;	/* IPI handler lock */
 
 	/* channel manager related fields */
 
 	atomic_t channel_mgr_requests;	/* #of requests to activate chan mgr */
 	wait_queue_head_t channel_mgr_wq;	/* channel mgr's wait queue */
 
+	union {
+		struct xpc_partition_sn2 sn2;
+		struct xpc_partition_uv uv;
+	} sn;
+
 } ____cacheline_aligned;
 
 /* struct xpc_partition act_state values (for XPC HB) */
 
-#define	XPC_P_INACTIVE		0x00	/* partition is not active */
-#define XPC_P_ACTIVATION_REQ	0x01	/* created thread to activate */
-#define XPC_P_ACTIVATING	0x02	/* activation thread started */
-#define XPC_P_ACTIVE		0x03	/* xpc_partition_up() was called */
-#define XPC_P_DEACTIVATING	0x04	/* partition deactivation initiated */
+#define	XPC_P_AS_INACTIVE	0x00	/* partition is not active */
+#define XPC_P_AS_ACTIVATION_REQ	0x01	/* created thread to activate */
+#define XPC_P_AS_ACTIVATING	0x02	/* activation thread started */
+#define XPC_P_AS_ACTIVE		0x03	/* xpc_partition_up() was called */
+#define XPC_P_AS_DEACTIVATING	0x04	/* partition deactivation initiated */
 
 #define XPC_DEACTIVATE_PARTITION(_p, _reason) \
 			xpc_deactivate_partition(__LINE__, (_p), (_reason))
 
 /* struct xpc_partition setup_state values */
 
-#define XPC_P_UNSET		0x00	/* infrastructure was never setup */
-#define XPC_P_SETUP		0x01	/* infrastructure is setup */
-#define XPC_P_WTEARDOWN		0x02	/* waiting to teardown infrastructure */
-#define XPC_P_TORNDOWN		0x03	/* infrastructure is torndown */
+#define XPC_P_SS_UNSET		0x00	/* infrastructure was never setup */
+#define XPC_P_SS_SETUP		0x01	/* infrastructure is setup */
+#define XPC_P_SS_WTEARDOWN	0x02	/* waiting to teardown infrastructure */
+#define XPC_P_SS_TORNDOWN	0x03	/* infrastructure is torndown */
 
 /*
- * struct xpc_partition IPI_timer #of seconds to wait before checking for
- * dropped IPIs. These occur whenever an IPI amo write doesn't complete until
- * after the IPI was received.
+ * struct xpc_partition_sn2's dropped notify IRQ timer is set to wait the
+ * following interval #of seconds before checking for dropped notify IRQs.
+ * These can occur whenever an IRQ's associated amo write doesn't complete
+ * until after the IRQ was received.
  */
-#define XPC_P_DROPPED_IPI_WAIT	(0.25 * HZ)
+#define XPC_DROPPED_NOTIFY_IRQ_WAIT_INTERVAL	(0.25 * HZ)
 
 /* number of seconds to wait for other partitions to disengage */
-#define XPC_DISENGAGE_REQUEST_DEFAULT_TIMELIMIT	90
+#define XPC_DISENGAGE_DEFAULT_TIMELIMIT		90
 
-/* interval in seconds to print 'waiting disengagement' messages */
-#define XPC_DISENGAGE_PRINTMSG_INTERVAL		10
+/* interval in seconds to print 'waiting deactivation' messages */
+#define XPC_DEACTIVATE_PRINTMSG_INTERVAL	10
 
 #define XPC_PARTID(_p)	((short)((_p) - &xpc_partitions[0]))
 
@@ -623,33 +779,92 @@ extern struct xpc_registration xpc_registrations[];
 /* found in xpc_main.c */
 extern struct device *xpc_part;
 extern struct device *xpc_chan;
-extern int xpc_disengage_request_timelimit;
-extern int xpc_disengage_request_timedout;
-extern irqreturn_t xpc_notify_IRQ_handler(int, void *);
-extern void xpc_dropped_IPI_check(struct xpc_partition *);
+extern int xpc_disengage_timelimit;
+extern int xpc_disengage_timedout;
+extern int xpc_activate_IRQ_rcvd;
+extern spinlock_t xpc_activate_IRQ_rcvd_lock;
+extern wait_queue_head_t xpc_activate_IRQ_wq;
+extern void *xpc_heartbeating_to_mask;
+extern void *xpc_kzalloc_cacheline_aligned(size_t, gfp_t, void **);
 extern void xpc_activate_partition(struct xpc_partition *);
 extern void xpc_activate_kthreads(struct xpc_channel *, int);
 extern void xpc_create_kthreads(struct xpc_channel *, int, int);
 extern void xpc_disconnect_wait(int);
+extern int (*xpc_setup_partitions_sn) (void);
+extern enum xp_retval (*xpc_get_partition_rsvd_page_pa) (void *, u64 *,
+							 unsigned long *,
+							 size_t *);
+extern int (*xpc_setup_rsvd_page_sn) (struct xpc_rsvd_page *);
+extern void (*xpc_heartbeat_init) (void);
+extern void (*xpc_heartbeat_exit) (void);
+extern void (*xpc_increment_heartbeat) (void);
+extern void (*xpc_offline_heartbeat) (void);
+extern void (*xpc_online_heartbeat) (void);
+extern enum xp_retval (*xpc_get_remote_heartbeat) (struct xpc_partition *);
+extern enum xp_retval (*xpc_make_first_contact) (struct xpc_partition *);
+extern u64 (*xpc_get_chctl_all_flags) (struct xpc_partition *);
+extern enum xp_retval (*xpc_setup_msg_structures) (struct xpc_channel *);
+extern void (*xpc_teardown_msg_structures) (struct xpc_channel *);
+extern void (*xpc_notify_senders_of_disconnect) (struct xpc_channel *);
+extern void (*xpc_process_msg_chctl_flags) (struct xpc_partition *, int);
+extern int (*xpc_n_of_deliverable_payloads) (struct xpc_channel *);
+extern void *(*xpc_get_deliverable_payload) (struct xpc_channel *);
+extern void (*xpc_request_partition_activation) (struct xpc_rsvd_page *,
+						 unsigned long, int);
+extern void (*xpc_request_partition_reactivation) (struct xpc_partition *);
+extern void (*xpc_request_partition_deactivation) (struct xpc_partition *);
+extern void (*xpc_cancel_partition_deactivation_request) (
+							struct xpc_partition *);
+extern void (*xpc_process_activate_IRQ_rcvd) (void);
+extern enum xp_retval (*xpc_setup_ch_structures_sn) (struct xpc_partition *);
+extern void (*xpc_teardown_ch_structures_sn) (struct xpc_partition *);
+
+extern void (*xpc_indicate_partition_engaged) (struct xpc_partition *);
+extern int (*xpc_partition_engaged) (short);
+extern int (*xpc_any_partition_engaged) (void);
+extern void (*xpc_indicate_partition_disengaged) (struct xpc_partition *);
+extern void (*xpc_assume_partition_disengaged) (short);
+
+extern void (*xpc_send_chctl_closerequest) (struct xpc_channel *,
+					    unsigned long *);
+extern void (*xpc_send_chctl_closereply) (struct xpc_channel *,
+					  unsigned long *);
+extern void (*xpc_send_chctl_openrequest) (struct xpc_channel *,
+					   unsigned long *);
+extern void (*xpc_send_chctl_openreply) (struct xpc_channel *, unsigned long *);
+
+extern void (*xpc_save_remote_msgqueue_pa) (struct xpc_channel *,
+					    unsigned long);
+
+extern enum xp_retval (*xpc_send_payload) (struct xpc_channel *, u32, void *,
+					   u16, u8, xpc_notify_func, void *);
+extern void (*xpc_received_payload) (struct xpc_channel *, void *);
+
+/* found in xpc_sn2.c */
+extern int xpc_init_sn2(void);
+extern void xpc_exit_sn2(void);
+
+/* found in xpc_uv.c */
+extern int xpc_init_uv(void);
+extern void xpc_exit_uv(void);
 
 /* found in xpc_partition.c */
 extern int xpc_exiting;
-extern struct xpc_vars *xpc_vars;
+extern int xpc_nasid_mask_nlongs;
 extern struct xpc_rsvd_page *xpc_rsvd_page;
-extern struct xpc_vars_part *xpc_vars_part;
-extern struct xpc_partition xpc_partitions[XP_MAX_PARTITIONS + 1];
-extern char *xpc_remote_copy_buffer;
-extern void *xpc_remote_copy_buffer_base;
+extern unsigned long *xpc_mach_nasids;
+extern struct xpc_partition *xpc_partitions;
 extern void *xpc_kmalloc_cacheline_aligned(size_t, gfp_t, void **);
-extern struct xpc_rsvd_page *xpc_rsvd_page_init(void);
-extern void xpc_allow_IPI_ops(void);
-extern void xpc_restrict_IPI_ops(void);
-extern int xpc_identify_act_IRQ_sender(void);
+extern int xpc_setup_rsvd_page(void);
+extern void xpc_teardown_rsvd_page(void);
+extern int xpc_identify_activate_IRQ_sender(void);
 extern int xpc_partition_disengaged(struct xpc_partition *);
 extern enum xp_retval xpc_mark_partition_active(struct xpc_partition *);
 extern void xpc_mark_partition_inactive(struct xpc_partition *);
 extern void xpc_discovery(void);
-extern void xpc_check_remote_hb(void);
+extern enum xp_retval xpc_get_remote_rp(int, unsigned long *,
+					struct xpc_rsvd_page *,
+					unsigned long *);
 extern void xpc_deactivate_partition(const int, struct xpc_partition *,
 				     enum xp_retval);
 extern enum xp_retval xpc_initiate_partid_to_nasids(short, void *);
@@ -657,21 +872,52 @@ extern enum xp_retval xpc_initiate_partid_to_nasids(short, void *);
 /* found in xpc_channel.c */
 extern void xpc_initiate_connect(int);
 extern void xpc_initiate_disconnect(int);
-extern enum xp_retval xpc_initiate_allocate(short, int, u32, void **);
-extern enum xp_retval xpc_initiate_send(short, int, void *);
-extern enum xp_retval xpc_initiate_send_notify(short, int, void *,
+extern enum xp_retval xpc_allocate_msg_wait(struct xpc_channel *);
+extern enum xp_retval xpc_initiate_send(short, int, u32, void *, u16);
+extern enum xp_retval xpc_initiate_send_notify(short, int, u32, void *, u16,
 					       xpc_notify_func, void *);
 extern void xpc_initiate_received(short, int, void *);
-extern enum xp_retval xpc_setup_infrastructure(struct xpc_partition *);
-extern enum xp_retval xpc_pull_remote_vars_part(struct xpc_partition *);
-extern void xpc_process_channel_activity(struct xpc_partition *);
+extern void xpc_process_sent_chctl_flags(struct xpc_partition *);
 extern void xpc_connected_callout(struct xpc_channel *);
-extern void xpc_deliver_msg(struct xpc_channel *);
+extern void xpc_deliver_payload(struct xpc_channel *);
 extern void xpc_disconnect_channel(const int, struct xpc_channel *,
 				   enum xp_retval, unsigned long *);
 extern void xpc_disconnect_callout(struct xpc_channel *, enum xp_retval);
 extern void xpc_partition_going_down(struct xpc_partition *, enum xp_retval);
-extern void xpc_teardown_infrastructure(struct xpc_partition *);
+
+static inline int
+xpc_hb_allowed(short partid, void *heartbeating_to_mask)
+{
+	return test_bit(partid, heartbeating_to_mask);
+}
+
+static inline int
+xpc_any_hbs_allowed(void)
+{
+	DBUG_ON(xpc_heartbeating_to_mask == NULL);
+	return !bitmap_empty(xpc_heartbeating_to_mask, xp_max_npartitions);
+}
+
+static inline void
+xpc_allow_hb(short partid)
+{
+	DBUG_ON(xpc_heartbeating_to_mask == NULL);
+	set_bit(partid, xpc_heartbeating_to_mask);
+}
+
+static inline void
+xpc_disallow_hb(short partid)
+{
+	DBUG_ON(xpc_heartbeating_to_mask == NULL);
+	clear_bit(partid, xpc_heartbeating_to_mask);
+}
+
+static inline void
+xpc_disallow_all_hbs(void)
+{
+	DBUG_ON(xpc_heartbeating_to_mask == NULL);
+	bitmap_zero(xpc_heartbeating_to_mask, xp_max_npartitions);
+}
 
 static inline void
 xpc_wakeup_channel_mgr(struct xpc_partition *part)
@@ -713,7 +959,7 @@ xpc_part_deref(struct xpc_partition *part)
 	s32 refs = atomic_dec_return(&part->references);
 
 	DBUG_ON(refs < 0);
-	if (refs == 0 && part->setup_state == XPC_P_WTEARDOWN)
+	if (refs == 0 && part->setup_state == XPC_P_SS_WTEARDOWN)
 		wake_up(&part->teardown_wq);
 }
 
@@ -723,7 +969,7 @@ xpc_part_ref(struct xpc_partition *part)
 	int setup;
 
 	atomic_inc(&part->references);
-	setup = (part->setup_state == XPC_P_SETUP);
+	setup = (part->setup_state == XPC_P_SS_SETUP);
 	if (!setup)
 		xpc_part_deref(part);
 
@@ -741,416 +987,4 @@ xpc_part_ref(struct xpc_partition *part)
 		(_p)->reason_line = _line; \
 	}
 
-/*
- * This next set of inlines are used to keep track of when a partition is
- * potentially engaged in accessing memory belonging to another partition.
- */
-
-static inline void
-xpc_mark_partition_engaged(struct xpc_partition *part)
-{
-	unsigned long irq_flags;
-	AMO_t *amo = (AMO_t *)__va(part->remote_amos_page_pa +
-				   (XPC_ENGAGED_PARTITIONS_AMO *
-				    sizeof(AMO_t)));
-
-	local_irq_save(irq_flags);
-
-	/* set bit corresponding to our partid in remote partition's AMO */
-	FETCHOP_STORE_OP(TO_AMO((u64)&amo->variable), FETCHOP_OR,
-			 (1UL << sn_partition_id));
-	/*
-	 * We must always use the nofault function regardless of whether we
-	 * are on a Shub 1.1 system or a Shub 1.2 slice 0xc processor. If we
-	 * didn't, we'd never know that the other partition is down and would
-	 * keep sending IPIs and AMOs to it until the heartbeat times out.
-	 */
-	(void)xp_nofault_PIOR((u64 *)GLOBAL_MMR_ADDR(NASID_GET(&amo->
-							       variable),
-						     xp_nofault_PIOR_target));
-
-	local_irq_restore(irq_flags);
-}
-
-static inline void
-xpc_mark_partition_disengaged(struct xpc_partition *part)
-{
-	unsigned long irq_flags;
-	AMO_t *amo = (AMO_t *)__va(part->remote_amos_page_pa +
-				   (XPC_ENGAGED_PARTITIONS_AMO *
-				    sizeof(AMO_t)));
-
-	local_irq_save(irq_flags);
-
-	/* clear bit corresponding to our partid in remote partition's AMO */
-	FETCHOP_STORE_OP(TO_AMO((u64)&amo->variable), FETCHOP_AND,
-			 ~(1UL << sn_partition_id));
-	/*
-	 * We must always use the nofault function regardless of whether we
-	 * are on a Shub 1.1 system or a Shub 1.2 slice 0xc processor. If we
-	 * didn't, we'd never know that the other partition is down and would
-	 * keep sending IPIs and AMOs to it until the heartbeat times out.
-	 */
-	(void)xp_nofault_PIOR((u64 *)GLOBAL_MMR_ADDR(NASID_GET(&amo->
-							       variable),
-						     xp_nofault_PIOR_target));
-
-	local_irq_restore(irq_flags);
-}
-
-static inline void
-xpc_request_partition_disengage(struct xpc_partition *part)
-{
-	unsigned long irq_flags;
-	AMO_t *amo = (AMO_t *)__va(part->remote_amos_page_pa +
-				   (XPC_DISENGAGE_REQUEST_AMO * sizeof(AMO_t)));
-
-	local_irq_save(irq_flags);
-
-	/* set bit corresponding to our partid in remote partition's AMO */
-	FETCHOP_STORE_OP(TO_AMO((u64)&amo->variable), FETCHOP_OR,
-			 (1UL << sn_partition_id));
-	/*
-	 * We must always use the nofault function regardless of whether we
-	 * are on a Shub 1.1 system or a Shub 1.2 slice 0xc processor. If we
-	 * didn't, we'd never know that the other partition is down and would
-	 * keep sending IPIs and AMOs to it until the heartbeat times out.
-	 */
-	(void)xp_nofault_PIOR((u64 *)GLOBAL_MMR_ADDR(NASID_GET(&amo->
-							       variable),
-						     xp_nofault_PIOR_target));
-
-	local_irq_restore(irq_flags);
-}
-
-static inline void
-xpc_cancel_partition_disengage_request(struct xpc_partition *part)
-{
-	unsigned long irq_flags;
-	AMO_t *amo = (AMO_t *)__va(part->remote_amos_page_pa +
-				   (XPC_DISENGAGE_REQUEST_AMO * sizeof(AMO_t)));
-
-	local_irq_save(irq_flags);
-
-	/* clear bit corresponding to our partid in remote partition's AMO */
-	FETCHOP_STORE_OP(TO_AMO((u64)&amo->variable), FETCHOP_AND,
-			 ~(1UL << sn_partition_id));
-	/*
-	 * We must always use the nofault function regardless of whether we
-	 * are on a Shub 1.1 system or a Shub 1.2 slice 0xc processor. If we
-	 * didn't, we'd never know that the other partition is down and would
-	 * keep sending IPIs and AMOs to it until the heartbeat times out.
-	 */
-	(void)xp_nofault_PIOR((u64 *)GLOBAL_MMR_ADDR(NASID_GET(&amo->
-							       variable),
-						     xp_nofault_PIOR_target));
-
-	local_irq_restore(irq_flags);
-}
-
-static inline u64
-xpc_partition_engaged(u64 partid_mask)
-{
-	AMO_t *amo = xpc_vars->amos_page + XPC_ENGAGED_PARTITIONS_AMO;
-
-	/* return our partition's AMO variable ANDed with partid_mask */
-	return (FETCHOP_LOAD_OP(TO_AMO((u64)&amo->variable), FETCHOP_LOAD) &
-		partid_mask);
-}
-
-static inline u64
-xpc_partition_disengage_requested(u64 partid_mask)
-{
-	AMO_t *amo = xpc_vars->amos_page + XPC_DISENGAGE_REQUEST_AMO;
-
-	/* return our partition's AMO variable ANDed with partid_mask */
-	return (FETCHOP_LOAD_OP(TO_AMO((u64)&amo->variable), FETCHOP_LOAD) &
-		partid_mask);
-}
-
-static inline void
-xpc_clear_partition_engaged(u64 partid_mask)
-{
-	AMO_t *amo = xpc_vars->amos_page + XPC_ENGAGED_PARTITIONS_AMO;
-
-	/* clear bit(s) based on partid_mask in our partition's AMO */
-	FETCHOP_STORE_OP(TO_AMO((u64)&amo->variable), FETCHOP_AND,
-			 ~partid_mask);
-}
-
-static inline void
-xpc_clear_partition_disengage_request(u64 partid_mask)
-{
-	AMO_t *amo = xpc_vars->amos_page + XPC_DISENGAGE_REQUEST_AMO;
-
-	/* clear bit(s) based on partid_mask in our partition's AMO */
-	FETCHOP_STORE_OP(TO_AMO((u64)&amo->variable), FETCHOP_AND,
-			 ~partid_mask);
-}
-
-/*
- * The following set of macros and inlines are used for the sending and
- * receiving of IPIs (also known as IRQs). There are two flavors of IPIs,
- * one that is associated with partition activity (SGI_XPC_ACTIVATE) and
- * the other that is associated with channel activity (SGI_XPC_NOTIFY).
- */
-
-static inline u64
-xpc_IPI_receive(AMO_t *amo)
-{
-	return FETCHOP_LOAD_OP(TO_AMO((u64)&amo->variable), FETCHOP_CLEAR);
-}
-
-static inline enum xp_retval
-xpc_IPI_send(AMO_t *amo, u64 flag, int nasid, int phys_cpuid, int vector)
-{
-	int ret = 0;
-	unsigned long irq_flags;
-
-	local_irq_save(irq_flags);
-
-	FETCHOP_STORE_OP(TO_AMO((u64)&amo->variable), FETCHOP_OR, flag);
-	sn_send_IPI_phys(nasid, phys_cpuid, vector, 0);
-
-	/*
-	 * We must always use the nofault function regardless of whether we
-	 * are on a Shub 1.1 system or a Shub 1.2 slice 0xc processor. If we
-	 * didn't, we'd never know that the other partition is down and would
-	 * keep sending IPIs and AMOs to it until the heartbeat times out.
-	 */
-	ret = xp_nofault_PIOR((u64 *)GLOBAL_MMR_ADDR(NASID_GET(&amo->variable),
-						     xp_nofault_PIOR_target));
-
-	local_irq_restore(irq_flags);
-
-	return ((ret == 0) ? xpSuccess : xpPioReadError);
-}
-
-/*
- * IPIs associated with SGI_XPC_ACTIVATE IRQ.
- */
-
-/*
- * Flag the appropriate AMO variable and send an IPI to the specified node.
- */
-static inline void
-xpc_activate_IRQ_send(u64 amos_page_pa, int from_nasid, int to_nasid,
-		      int to_phys_cpuid)
-{
-	int w_index = XPC_NASID_W_INDEX(from_nasid);
-	int b_index = XPC_NASID_B_INDEX(from_nasid);
-	AMO_t *amos = (AMO_t *)__va(amos_page_pa +
-				    (XPC_ACTIVATE_IRQ_AMOS * sizeof(AMO_t)));
-
-	(void)xpc_IPI_send(&amos[w_index], (1UL << b_index), to_nasid,
-			   to_phys_cpuid, SGI_XPC_ACTIVATE);
-}
-
-static inline void
-xpc_IPI_send_activate(struct xpc_vars *vars)
-{
-	xpc_activate_IRQ_send(vars->amos_page_pa, cnodeid_to_nasid(0),
-			      vars->act_nasid, vars->act_phys_cpuid);
-}
-
-static inline void
-xpc_IPI_send_activated(struct xpc_partition *part)
-{
-	xpc_activate_IRQ_send(part->remote_amos_page_pa, cnodeid_to_nasid(0),
-			      part->remote_act_nasid,
-			      part->remote_act_phys_cpuid);
-}
-
-static inline void
-xpc_IPI_send_reactivate(struct xpc_partition *part)
-{
-	xpc_activate_IRQ_send(xpc_vars->amos_page_pa, part->reactivate_nasid,
-			      xpc_vars->act_nasid, xpc_vars->act_phys_cpuid);
-}
-
-static inline void
-xpc_IPI_send_disengage(struct xpc_partition *part)
-{
-	xpc_activate_IRQ_send(part->remote_amos_page_pa, cnodeid_to_nasid(0),
-			      part->remote_act_nasid,
-			      part->remote_act_phys_cpuid);
-}
-
-/*
- * IPIs associated with SGI_XPC_NOTIFY IRQ.
- */
-
-/*
- * Send an IPI to the remote partition that is associated with the
- * specified channel.
- */
-#define XPC_NOTIFY_IRQ_SEND(_ch, _ipi_f, _irq_f) \
-		xpc_notify_IRQ_send(_ch, _ipi_f, #_ipi_f, _irq_f)
-
-static inline void
-xpc_notify_IRQ_send(struct xpc_channel *ch, u8 ipi_flag, char *ipi_flag_string,
-		    unsigned long *irq_flags)
-{
-	struct xpc_partition *part = &xpc_partitions[ch->partid];
-	enum xp_retval ret;
-
-	if (likely(part->act_state != XPC_P_DEACTIVATING)) {
-		ret = xpc_IPI_send(part->remote_IPI_amo_va,
-				   (u64)ipi_flag << (ch->number * 8),
-				   part->remote_IPI_nasid,
-				   part->remote_IPI_phys_cpuid, SGI_XPC_NOTIFY);
-		dev_dbg(xpc_chan, "%s sent to partid=%d, channel=%d, ret=%d\n",
-			ipi_flag_string, ch->partid, ch->number, ret);
-		if (unlikely(ret != xpSuccess)) {
-			if (irq_flags != NULL)
-				spin_unlock_irqrestore(&ch->lock, *irq_flags);
-			XPC_DEACTIVATE_PARTITION(part, ret);
-			if (irq_flags != NULL)
-				spin_lock_irqsave(&ch->lock, *irq_flags);
-		}
-	}
-}
-
-/*
- * Make it look like the remote partition, which is associated with the
- * specified channel, sent us an IPI. This faked IPI will be handled
- * by xpc_dropped_IPI_check().
- */
-#define XPC_NOTIFY_IRQ_SEND_LOCAL(_ch, _ipi_f) \
-		xpc_notify_IRQ_send_local(_ch, _ipi_f, #_ipi_f)
-
-static inline void
-xpc_notify_IRQ_send_local(struct xpc_channel *ch, u8 ipi_flag,
-			  char *ipi_flag_string)
-{
-	struct xpc_partition *part = &xpc_partitions[ch->partid];
-
-	FETCHOP_STORE_OP(TO_AMO((u64)&part->local_IPI_amo_va->variable),
-			 FETCHOP_OR, ((u64)ipi_flag << (ch->number * 8)));
-	dev_dbg(xpc_chan, "%s sent local from partid=%d, channel=%d\n",
-		ipi_flag_string, ch->partid, ch->number);
-}
-
-/*
- * The sending and receiving of IPIs includes the setting of an AMO variable
- * to indicate the reason the IPI was sent. The 64-bit variable is divided
- * up into eight bytes, ordered from right to left. Byte zero pertains to
- * channel 0, byte one to channel 1, and so on. Each byte is described by
- * the following IPI flags.
- */
-
-#define	XPC_IPI_CLOSEREQUEST	0x01
-#define	XPC_IPI_CLOSEREPLY	0x02
-#define	XPC_IPI_OPENREQUEST	0x04
-#define	XPC_IPI_OPENREPLY	0x08
-#define	XPC_IPI_MSGREQUEST	0x10
-
-/* given an AMO variable and a channel#, get its associated IPI flags */
-#define XPC_GET_IPI_FLAGS(_amo, _c)	((u8) (((_amo) >> ((_c) * 8)) & 0xff))
-#define XPC_SET_IPI_FLAGS(_amo, _c, _f)	(_amo) |= ((u64) (_f) << ((_c) * 8))
-
-#define	XPC_ANY_OPENCLOSE_IPI_FLAGS_SET(_amo) ((_amo) & 0x0f0f0f0f0f0f0f0fUL)
-#define XPC_ANY_MSG_IPI_FLAGS_SET(_amo)       ((_amo) & 0x1010101010101010UL)
-
-static inline void
-xpc_IPI_send_closerequest(struct xpc_channel *ch, unsigned long *irq_flags)
-{
-	struct xpc_openclose_args *args = ch->local_openclose_args;
-
-	args->reason = ch->reason;
-
-	XPC_NOTIFY_IRQ_SEND(ch, XPC_IPI_CLOSEREQUEST, irq_flags);
-}
-
-static inline void
-xpc_IPI_send_closereply(struct xpc_channel *ch, unsigned long *irq_flags)
-{
-	XPC_NOTIFY_IRQ_SEND(ch, XPC_IPI_CLOSEREPLY, irq_flags);
-}
-
-static inline void
-xpc_IPI_send_openrequest(struct xpc_channel *ch, unsigned long *irq_flags)
-{
-	struct xpc_openclose_args *args = ch->local_openclose_args;
-
-	args->msg_size = ch->msg_size;
-	args->local_nentries = ch->local_nentries;
-
-	XPC_NOTIFY_IRQ_SEND(ch, XPC_IPI_OPENREQUEST, irq_flags);
-}
-
-static inline void
-xpc_IPI_send_openreply(struct xpc_channel *ch, unsigned long *irq_flags)
-{
-	struct xpc_openclose_args *args = ch->local_openclose_args;
-
-	args->remote_nentries = ch->remote_nentries;
-	args->local_nentries = ch->local_nentries;
-	args->local_msgqueue_pa = __pa(ch->local_msgqueue);
-
-	XPC_NOTIFY_IRQ_SEND(ch, XPC_IPI_OPENREPLY, irq_flags);
-}
-
-static inline void
-xpc_IPI_send_msgrequest(struct xpc_channel *ch)
-{
-	XPC_NOTIFY_IRQ_SEND(ch, XPC_IPI_MSGREQUEST, NULL);
-}
-
-static inline void
-xpc_IPI_send_local_msgrequest(struct xpc_channel *ch)
-{
-	XPC_NOTIFY_IRQ_SEND_LOCAL(ch, XPC_IPI_MSGREQUEST);
-}
-
-/*
- * Memory for XPC's AMO variables is allocated by the MSPEC driver. These
- * pages are located in the lowest granule. The lowest granule uses 4k pages
- * for cached references and an alternate TLB handler to never provide a
- * cacheable mapping for the entire region. This will prevent speculative
- * reading of cached copies of our lines from being issued which will cause
- * a PI FSB Protocol error to be generated by the SHUB. For XPC, we need 64
- * AMO variables (based on XP_MAX_PARTITIONS) for message notification and an
- * additional 128 AMO variables (based on XP_NASID_MASK_WORDS) for partition
- * activation and 2 AMO variables for partition deactivation.
- */
-static inline AMO_t *
-xpc_IPI_init(int index)
-{
-	AMO_t *amo = xpc_vars->amos_page + index;
-
-	(void)xpc_IPI_receive(amo);	/* clear AMO variable */
-	return amo;
-}
-
-static inline enum xp_retval
-xpc_map_bte_errors(bte_result_t error)
-{
-	return ((error == BTE_SUCCESS) ? xpSuccess : xpBteCopyError);
-}
-
-/*
- * Check to see if there is any channel activity to/from the specified
- * partition.
- */
-static inline void
-xpc_check_for_channel_activity(struct xpc_partition *part)
-{
-	u64 IPI_amo;
-	unsigned long irq_flags;
-
-	IPI_amo = xpc_IPI_receive(part->local_IPI_amo_va);
-	if (IPI_amo == 0)
-		return;
-
-	spin_lock_irqsave(&part->IPI_lock, irq_flags);
-	part->local_IPI_amo |= IPI_amo;
-	spin_unlock_irqrestore(&part->IPI_lock, irq_flags);
-
-	dev_dbg(xpc_chan, "received IPI from partid=%d, IPI_amo=0x%lx\n",
-		XPC_PARTID(part), IPI_amo);
-
-	xpc_wakeup_channel_mgr(part);
-}
-
 #endif /* _DRIVERS_MISC_SGIXP_XPC_H */
diff --git a/drivers/misc/sgi-xp/xpc_channel.c b/drivers/misc/sgi-xp/xpc_channel.c
index 9c90c2d55c08..9cd2ebe2a3b6 100644
--- a/drivers/misc/sgi-xp/xpc_channel.c
+++ b/drivers/misc/sgi-xp/xpc_channel.c
@@ -14,536 +14,10 @@
  *
  */
 
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/sched.h>
-#include <linux/cache.h>
-#include <linux/interrupt.h>
-#include <linux/mutex.h>
-#include <linux/completion.h>
-#include <asm/sn/bte.h>
-#include <asm/sn/sn_sal.h>
+#include <linux/device.h>
 #include "xpc.h"
 
 /*
- * Guarantee that the kzalloc'd memory is cacheline aligned.
- */
-static void *
-xpc_kzalloc_cacheline_aligned(size_t size, gfp_t flags, void **base)
-{
-	/* see if kzalloc will give us cachline aligned memory by default */
-	*base = kzalloc(size, flags);
-	if (*base == NULL)
-		return NULL;
-
-	if ((u64)*base == L1_CACHE_ALIGN((u64)*base))
-		return *base;
-
-	kfree(*base);
-
-	/* nope, we'll have to do it ourselves */
-	*base = kzalloc(size + L1_CACHE_BYTES, flags);
-	if (*base == NULL)
-		return NULL;
-
-	return (void *)L1_CACHE_ALIGN((u64)*base);
-}
-
-/*
- * Set up the initial values for the XPartition Communication channels.
- */
-static void
-xpc_initialize_channels(struct xpc_partition *part, short partid)
-{
-	int ch_number;
-	struct xpc_channel *ch;
-
-	for (ch_number = 0; ch_number < part->nchannels; ch_number++) {
-		ch = &part->channels[ch_number];
-
-		ch->partid = partid;
-		ch->number = ch_number;
-		ch->flags = XPC_C_DISCONNECTED;
-
-		ch->local_GP = &part->local_GPs[ch_number];
-		ch->local_openclose_args =
-		    &part->local_openclose_args[ch_number];
-
-		atomic_set(&ch->kthreads_assigned, 0);
-		atomic_set(&ch->kthreads_idle, 0);
-		atomic_set(&ch->kthreads_active, 0);
-
-		atomic_set(&ch->references, 0);
-		atomic_set(&ch->n_to_notify, 0);
-
-		spin_lock_init(&ch->lock);
-		mutex_init(&ch->msg_to_pull_mutex);
-		init_completion(&ch->wdisconnect_wait);
-
-		atomic_set(&ch->n_on_msg_allocate_wq, 0);
-		init_waitqueue_head(&ch->msg_allocate_wq);
-		init_waitqueue_head(&ch->idle_wq);
-	}
-}
-
-/*
- * Setup the infrastructure necessary to support XPartition Communication
- * between the specified remote partition and the local one.
- */
-enum xp_retval
-xpc_setup_infrastructure(struct xpc_partition *part)
-{
-	int ret, cpuid;
-	struct timer_list *timer;
-	short partid = XPC_PARTID(part);
-
-	/*
-	 * Zero out MOST of the entry for this partition. Only the fields
-	 * starting with `nchannels' will be zeroed. The preceding fields must
-	 * remain `viable' across partition ups and downs, since they may be
-	 * referenced during this memset() operation.
-	 */
-	memset(&part->nchannels, 0, sizeof(struct xpc_partition) -
-	       offsetof(struct xpc_partition, nchannels));
-
-	/*
-	 * Allocate all of the channel structures as a contiguous chunk of
-	 * memory.
-	 */
-	part->channels = kzalloc(sizeof(struct xpc_channel) * XPC_NCHANNELS,
-				 GFP_KERNEL);
-	if (part->channels == NULL) {
-		dev_err(xpc_chan, "can't get memory for channels\n");
-		return xpNoMemory;
-	}
-
-	part->nchannels = XPC_NCHANNELS;
-
-	/* allocate all the required GET/PUT values */
-
-	part->local_GPs = xpc_kzalloc_cacheline_aligned(XPC_GP_SIZE,
-							GFP_KERNEL,
-							&part->local_GPs_base);
-	if (part->local_GPs == NULL) {
-		kfree(part->channels);
-		part->channels = NULL;
-		dev_err(xpc_chan, "can't get memory for local get/put "
-			"values\n");
-		return xpNoMemory;
-	}
-
-	part->remote_GPs = xpc_kzalloc_cacheline_aligned(XPC_GP_SIZE,
-							 GFP_KERNEL,
-							 &part->
-							 remote_GPs_base);
-	if (part->remote_GPs == NULL) {
-		dev_err(xpc_chan, "can't get memory for remote get/put "
-			"values\n");
-		kfree(part->local_GPs_base);
-		part->local_GPs = NULL;
-		kfree(part->channels);
-		part->channels = NULL;
-		return xpNoMemory;
-	}
-
-	/* allocate all the required open and close args */
-
-	part->local_openclose_args =
-	    xpc_kzalloc_cacheline_aligned(XPC_OPENCLOSE_ARGS_SIZE, GFP_KERNEL,
-					  &part->local_openclose_args_base);
-	if (part->local_openclose_args == NULL) {
-		dev_err(xpc_chan, "can't get memory for local connect args\n");
-		kfree(part->remote_GPs_base);
-		part->remote_GPs = NULL;
-		kfree(part->local_GPs_base);
-		part->local_GPs = NULL;
-		kfree(part->channels);
-		part->channels = NULL;
-		return xpNoMemory;
-	}
-
-	part->remote_openclose_args =
-	    xpc_kzalloc_cacheline_aligned(XPC_OPENCLOSE_ARGS_SIZE, GFP_KERNEL,
-					  &part->remote_openclose_args_base);
-	if (part->remote_openclose_args == NULL) {
-		dev_err(xpc_chan, "can't get memory for remote connect args\n");
-		kfree(part->local_openclose_args_base);
-		part->local_openclose_args = NULL;
-		kfree(part->remote_GPs_base);
-		part->remote_GPs = NULL;
-		kfree(part->local_GPs_base);
-		part->local_GPs = NULL;
-		kfree(part->channels);
-		part->channels = NULL;
-		return xpNoMemory;
-	}
-
-	xpc_initialize_channels(part, partid);
-
-	atomic_set(&part->nchannels_active, 0);
-	atomic_set(&part->nchannels_engaged, 0);
-
-	/* local_IPI_amo were set to 0 by an earlier memset() */
-
-	/* Initialize this partitions AMO_t structure */
-	part->local_IPI_amo_va = xpc_IPI_init(partid);
-
-	spin_lock_init(&part->IPI_lock);
-
-	atomic_set(&part->channel_mgr_requests, 1);
-	init_waitqueue_head(&part->channel_mgr_wq);
-
-	sprintf(part->IPI_owner, "xpc%02d", partid);
-	ret = request_irq(SGI_XPC_NOTIFY, xpc_notify_IRQ_handler, IRQF_SHARED,
-			  part->IPI_owner, (void *)(u64)partid);
-	if (ret != 0) {
-		dev_err(xpc_chan, "can't register NOTIFY IRQ handler, "
-			"errno=%d\n", -ret);
-		kfree(part->remote_openclose_args_base);
-		part->remote_openclose_args = NULL;
-		kfree(part->local_openclose_args_base);
-		part->local_openclose_args = NULL;
-		kfree(part->remote_GPs_base);
-		part->remote_GPs = NULL;
-		kfree(part->local_GPs_base);
-		part->local_GPs = NULL;
-		kfree(part->channels);
-		part->channels = NULL;
-		return xpLackOfResources;
-	}
-
-	/* Setup a timer to check for dropped IPIs */
-	timer = &part->dropped_IPI_timer;
-	init_timer(timer);
-	timer->function = (void (*)(unsigned long))xpc_dropped_IPI_check;
-	timer->data = (unsigned long)part;
-	timer->expires = jiffies + XPC_P_DROPPED_IPI_WAIT;
-	add_timer(timer);
-
-	/*
-	 * With the setting of the partition setup_state to XPC_P_SETUP, we're
-	 * declaring that this partition is ready to go.
-	 */
-	part->setup_state = XPC_P_SETUP;
-
-	/*
-	 * Setup the per partition specific variables required by the
-	 * remote partition to establish channel connections with us.
-	 *
-	 * The setting of the magic # indicates that these per partition
-	 * specific variables are ready to be used.
-	 */
-	xpc_vars_part[partid].GPs_pa = __pa(part->local_GPs);
-	xpc_vars_part[partid].openclose_args_pa =
-	    __pa(part->local_openclose_args);
-	xpc_vars_part[partid].IPI_amo_pa = __pa(part->local_IPI_amo_va);
-	cpuid = raw_smp_processor_id();	/* any CPU in this partition will do */
-	xpc_vars_part[partid].IPI_nasid = cpuid_to_nasid(cpuid);
-	xpc_vars_part[partid].IPI_phys_cpuid = cpu_physical_id(cpuid);
-	xpc_vars_part[partid].nchannels = part->nchannels;
-	xpc_vars_part[partid].magic = XPC_VP_MAGIC1;
-
-	return xpSuccess;
-}
-
-/*
- * Create a wrapper that hides the underlying mechanism for pulling a cacheline
- * (or multiple cachelines) from a remote partition.
- *
- * src must be a cacheline aligned physical address on the remote partition.
- * dst must be a cacheline aligned virtual address on this partition.
- * cnt must be an cacheline sized
- */
-static enum xp_retval
-xpc_pull_remote_cachelines(struct xpc_partition *part, void *dst,
-			   const void *src, size_t cnt)
-{
-	bte_result_t bte_ret;
-
-	DBUG_ON((u64)src != L1_CACHE_ALIGN((u64)src));
-	DBUG_ON((u64)dst != L1_CACHE_ALIGN((u64)dst));
-	DBUG_ON(cnt != L1_CACHE_ALIGN(cnt));
-
-	if (part->act_state == XPC_P_DEACTIVATING)
-		return part->reason;
-
-	bte_ret = xp_bte_copy((u64)src, (u64)dst, (u64)cnt,
-			      (BTE_NORMAL | BTE_WACQUIRE), NULL);
-	if (bte_ret == BTE_SUCCESS)
-		return xpSuccess;
-
-	dev_dbg(xpc_chan, "xp_bte_copy() from partition %d failed, ret=%d\n",
-		XPC_PARTID(part), bte_ret);
-
-	return xpc_map_bte_errors(bte_ret);
-}
-
-/*
- * Pull the remote per partition specific variables from the specified
- * partition.
- */
-enum xp_retval
-xpc_pull_remote_vars_part(struct xpc_partition *part)
-{
-	u8 buffer[L1_CACHE_BYTES * 2];
-	struct xpc_vars_part *pulled_entry_cacheline =
-	    (struct xpc_vars_part *)L1_CACHE_ALIGN((u64)buffer);
-	struct xpc_vars_part *pulled_entry;
-	u64 remote_entry_cacheline_pa, remote_entry_pa;
-	short partid = XPC_PARTID(part);
-	enum xp_retval ret;
-
-	/* pull the cacheline that contains the variables we're interested in */
-
-	DBUG_ON(part->remote_vars_part_pa !=
-		L1_CACHE_ALIGN(part->remote_vars_part_pa));
-	DBUG_ON(sizeof(struct xpc_vars_part) != L1_CACHE_BYTES / 2);
-
-	remote_entry_pa = part->remote_vars_part_pa +
-	    sn_partition_id * sizeof(struct xpc_vars_part);
-
-	remote_entry_cacheline_pa = (remote_entry_pa & ~(L1_CACHE_BYTES - 1));
-
-	pulled_entry = (struct xpc_vars_part *)((u64)pulled_entry_cacheline +
-						(remote_entry_pa &
-						 (L1_CACHE_BYTES - 1)));
-
-	ret = xpc_pull_remote_cachelines(part, pulled_entry_cacheline,
-					 (void *)remote_entry_cacheline_pa,
-					 L1_CACHE_BYTES);
-	if (ret != xpSuccess) {
-		dev_dbg(xpc_chan, "failed to pull XPC vars_part from "
-			"partition %d, ret=%d\n", partid, ret);
-		return ret;
-	}
-
-	/* see if they've been set up yet */
-
-	if (pulled_entry->magic != XPC_VP_MAGIC1 &&
-	    pulled_entry->magic != XPC_VP_MAGIC2) {
-
-		if (pulled_entry->magic != 0) {
-			dev_dbg(xpc_chan, "partition %d's XPC vars_part for "
-				"partition %d has bad magic value (=0x%lx)\n",
-				partid, sn_partition_id, pulled_entry->magic);
-			return xpBadMagic;
-		}
-
-		/* they've not been initialized yet */
-		return xpRetry;
-	}
-
-	if (xpc_vars_part[partid].magic == XPC_VP_MAGIC1) {
-
-		/* validate the variables */
-
-		if (pulled_entry->GPs_pa == 0 ||
-		    pulled_entry->openclose_args_pa == 0 ||
-		    pulled_entry->IPI_amo_pa == 0) {
-
-			dev_err(xpc_chan, "partition %d's XPC vars_part for "
-				"partition %d are not valid\n", partid,
-				sn_partition_id);
-			return xpInvalidAddress;
-		}
-
-		/* the variables we imported look to be valid */
-
-		part->remote_GPs_pa = pulled_entry->GPs_pa;
-		part->remote_openclose_args_pa =
-		    pulled_entry->openclose_args_pa;
-		part->remote_IPI_amo_va =
-		    (AMO_t *)__va(pulled_entry->IPI_amo_pa);
-		part->remote_IPI_nasid = pulled_entry->IPI_nasid;
-		part->remote_IPI_phys_cpuid = pulled_entry->IPI_phys_cpuid;
-
-		if (part->nchannels > pulled_entry->nchannels)
-			part->nchannels = pulled_entry->nchannels;
-
-		/* let the other side know that we've pulled their variables */
-
-		xpc_vars_part[partid].magic = XPC_VP_MAGIC2;
-	}
-
-	if (pulled_entry->magic == XPC_VP_MAGIC1)
-		return xpRetry;
-
-	return xpSuccess;
-}
-
-/*
- * Get the IPI flags and pull the openclose args and/or remote GPs as needed.
- */
-static u64
-xpc_get_IPI_flags(struct xpc_partition *part)
-{
-	unsigned long irq_flags;
-	u64 IPI_amo;
-	enum xp_retval ret;
-
-	/*
-	 * See if there are any IPI flags to be handled.
-	 */
-
-	spin_lock_irqsave(&part->IPI_lock, irq_flags);
-	IPI_amo = part->local_IPI_amo;
-	if (IPI_amo != 0)
-		part->local_IPI_amo = 0;
-
-	spin_unlock_irqrestore(&part->IPI_lock, irq_flags);
-
-	if (XPC_ANY_OPENCLOSE_IPI_FLAGS_SET(IPI_amo)) {
-		ret = xpc_pull_remote_cachelines(part,
-						 part->remote_openclose_args,
-						 (void *)part->
-						 remote_openclose_args_pa,
-						 XPC_OPENCLOSE_ARGS_SIZE);
-		if (ret != xpSuccess) {
-			XPC_DEACTIVATE_PARTITION(part, ret);
-
-			dev_dbg(xpc_chan, "failed to pull openclose args from "
-				"partition %d, ret=%d\n", XPC_PARTID(part),
-				ret);
-
-			/* don't bother processing IPIs anymore */
-			IPI_amo = 0;
-		}
-	}
-
-	if (XPC_ANY_MSG_IPI_FLAGS_SET(IPI_amo)) {
-		ret = xpc_pull_remote_cachelines(part, part->remote_GPs,
-						 (void *)part->remote_GPs_pa,
-						 XPC_GP_SIZE);
-		if (ret != xpSuccess) {
-			XPC_DEACTIVATE_PARTITION(part, ret);
-
-			dev_dbg(xpc_chan, "failed to pull GPs from partition "
-				"%d, ret=%d\n", XPC_PARTID(part), ret);
-
-			/* don't bother processing IPIs anymore */
-			IPI_amo = 0;
-		}
-	}
-
-	return IPI_amo;
-}
-
-/*
- * Allocate the local message queue and the notify queue.
- */
-static enum xp_retval
-xpc_allocate_local_msgqueue(struct xpc_channel *ch)
-{
-	unsigned long irq_flags;
-	int nentries;
-	size_t nbytes;
-
-	for (nentries = ch->local_nentries; nentries > 0; nentries--) {
-
-		nbytes = nentries * ch->msg_size;
-		ch->local_msgqueue = xpc_kzalloc_cacheline_aligned(nbytes,
-								   GFP_KERNEL,
-						      &ch->local_msgqueue_base);
-		if (ch->local_msgqueue == NULL)
-			continue;
-
-		nbytes = nentries * sizeof(struct xpc_notify);
-		ch->notify_queue = kzalloc(nbytes, GFP_KERNEL);
-		if (ch->notify_queue == NULL) {
-			kfree(ch->local_msgqueue_base);
-			ch->local_msgqueue = NULL;
-			continue;
-		}
-
-		spin_lock_irqsave(&ch->lock, irq_flags);
-		if (nentries < ch->local_nentries) {
-			dev_dbg(xpc_chan, "nentries=%d local_nentries=%d, "
-				"partid=%d, channel=%d\n", nentries,
-				ch->local_nentries, ch->partid, ch->number);
-
-			ch->local_nentries = nentries;
-		}
-		spin_unlock_irqrestore(&ch->lock, irq_flags);
-		return xpSuccess;
-	}
-
-	dev_dbg(xpc_chan, "can't get memory for local message queue and notify "
-		"queue, partid=%d, channel=%d\n", ch->partid, ch->number);
-	return xpNoMemory;
-}
-
-/*
- * Allocate the cached remote message queue.
- */
-static enum xp_retval
-xpc_allocate_remote_msgqueue(struct xpc_channel *ch)
-{
-	unsigned long irq_flags;
-	int nentries;
-	size_t nbytes;
-
-	DBUG_ON(ch->remote_nentries <= 0);
-
-	for (nentries = ch->remote_nentries; nentries > 0; nentries--) {
-
-		nbytes = nentries * ch->msg_size;
-		ch->remote_msgqueue = xpc_kzalloc_cacheline_aligned(nbytes,
-								    GFP_KERNEL,
-						     &ch->remote_msgqueue_base);
-		if (ch->remote_msgqueue == NULL)
-			continue;
-
-		spin_lock_irqsave(&ch->lock, irq_flags);
-		if (nentries < ch->remote_nentries) {
-			dev_dbg(xpc_chan, "nentries=%d remote_nentries=%d, "
-				"partid=%d, channel=%d\n", nentries,
-				ch->remote_nentries, ch->partid, ch->number);
-
-			ch->remote_nentries = nentries;
-		}
-		spin_unlock_irqrestore(&ch->lock, irq_flags);
-		return xpSuccess;
-	}
-
-	dev_dbg(xpc_chan, "can't get memory for cached remote message queue, "
-		"partid=%d, channel=%d\n", ch->partid, ch->number);
-	return xpNoMemory;
-}
-
-/*
- * Allocate message queues and other stuff associated with a channel.
- *
- * Note: Assumes all of the channel sizes are filled in.
- */
-static enum xp_retval
-xpc_allocate_msgqueues(struct xpc_channel *ch)
-{
-	unsigned long irq_flags;
-	enum xp_retval ret;
-
-	DBUG_ON(ch->flags & XPC_C_SETUP);
-
-	ret = xpc_allocate_local_msgqueue(ch);
-	if (ret != xpSuccess)
-		return ret;
-
-	ret = xpc_allocate_remote_msgqueue(ch);
-	if (ret != xpSuccess) {
-		kfree(ch->local_msgqueue_base);
-		ch->local_msgqueue = NULL;
-		kfree(ch->notify_queue);
-		ch->notify_queue = NULL;
-		return ret;
-	}
-
-	spin_lock_irqsave(&ch->lock, irq_flags);
-	ch->flags |= XPC_C_SETUP;
-	spin_unlock_irqrestore(&ch->lock, irq_flags);
-
-	return xpSuccess;
-}
-
-/*
  * Process a connect message from a remote partition.
  *
  * Note: xpc_process_connect() is expecting to be called with the
@@ -565,30 +39,29 @@ xpc_process_connect(struct xpc_channel *ch, unsigned long *irq_flags)
 
 	if (!(ch->flags & XPC_C_SETUP)) {
 		spin_unlock_irqrestore(&ch->lock, *irq_flags);
-		ret = xpc_allocate_msgqueues(ch);
+		ret = xpc_setup_msg_structures(ch);
 		spin_lock_irqsave(&ch->lock, *irq_flags);
 
 		if (ret != xpSuccess)
 			XPC_DISCONNECT_CHANNEL(ch, ret, irq_flags);
 
+		ch->flags |= XPC_C_SETUP;
+
 		if (ch->flags & (XPC_C_CONNECTED | XPC_C_DISCONNECTING))
 			return;
 
-		DBUG_ON(!(ch->flags & XPC_C_SETUP));
 		DBUG_ON(ch->local_msgqueue == NULL);
 		DBUG_ON(ch->remote_msgqueue == NULL);
 	}
 
 	if (!(ch->flags & XPC_C_OPENREPLY)) {
 		ch->flags |= XPC_C_OPENREPLY;
-		xpc_IPI_send_openreply(ch, irq_flags);
+		xpc_send_chctl_openreply(ch, irq_flags);
 	}
 
 	if (!(ch->flags & XPC_C_ROPENREPLY))
 		return;
 
-	DBUG_ON(ch->remote_msgqueue_pa == 0);
-
 	ch->flags = (XPC_C_CONNECTED | XPC_C_SETUP);	/* clear all else */
 
 	dev_info(xpc_chan, "channel %d to partition %d connected\n",
@@ -600,99 +73,6 @@ xpc_process_connect(struct xpc_channel *ch, unsigned long *irq_flags)
 }
 
 /*
- * Notify those who wanted to be notified upon delivery of their message.
- */
-static void
-xpc_notify_senders(struct xpc_channel *ch, enum xp_retval reason, s64 put)
-{
-	struct xpc_notify *notify;
-	u8 notify_type;
-	s64 get = ch->w_remote_GP.get - 1;
-
-	while (++get < put && atomic_read(&ch->n_to_notify) > 0) {
-
-		notify = &ch->notify_queue[get % ch->local_nentries];
-
-		/*
-		 * See if the notify entry indicates it was associated with
-		 * a message who's sender wants to be notified. It is possible
-		 * that it is, but someone else is doing or has done the
-		 * notification.
-		 */
-		notify_type = notify->type;
-		if (notify_type == 0 ||
-		    cmpxchg(&notify->type, notify_type, 0) != notify_type) {
-			continue;
-		}
-
-		DBUG_ON(notify_type != XPC_N_CALL);
-
-		atomic_dec(&ch->n_to_notify);
-
-		if (notify->func != NULL) {
-			dev_dbg(xpc_chan, "notify->func() called, notify=0x%p, "
-				"msg_number=%ld, partid=%d, channel=%d\n",
-				(void *)notify, get, ch->partid, ch->number);
-
-			notify->func(reason, ch->partid, ch->number,
-				     notify->key);
-
-			dev_dbg(xpc_chan, "notify->func() returned, "
-				"notify=0x%p, msg_number=%ld, partid=%d, "
-				"channel=%d\n", (void *)notify, get,
-				ch->partid, ch->number);
-		}
-	}
-}
-
-/*
- * Free up message queues and other stuff that were allocated for the specified
- * channel.
- *
- * Note: ch->reason and ch->reason_line are left set for debugging purposes,
- * they're cleared when XPC_C_DISCONNECTED is cleared.
- */
-static void
-xpc_free_msgqueues(struct xpc_channel *ch)
-{
-	DBUG_ON(!spin_is_locked(&ch->lock));
-	DBUG_ON(atomic_read(&ch->n_to_notify) != 0);
-
-	ch->remote_msgqueue_pa = 0;
-	ch->func = NULL;
-	ch->key = NULL;
-	ch->msg_size = 0;
-	ch->local_nentries = 0;
-	ch->remote_nentries = 0;
-	ch->kthreads_assigned_limit = 0;
-	ch->kthreads_idle_limit = 0;
-
-	ch->local_GP->get = 0;
-	ch->local_GP->put = 0;
-	ch->remote_GP.get = 0;
-	ch->remote_GP.put = 0;
-	ch->w_local_GP.get = 0;
-	ch->w_local_GP.put = 0;
-	ch->w_remote_GP.get = 0;
-	ch->w_remote_GP.put = 0;
-	ch->next_msg_to_pull = 0;
-
-	if (ch->flags & XPC_C_SETUP) {
-		ch->flags &= ~XPC_C_SETUP;
-
-		dev_dbg(xpc_chan, "ch->flags=0x%x, partid=%d, channel=%d\n",
-			ch->flags, ch->partid, ch->number);
-
-		kfree(ch->local_msgqueue_base);
-		ch->local_msgqueue = NULL;
-		kfree(ch->remote_msgqueue_base);
-		ch->remote_msgqueue = NULL;
-		kfree(ch->notify_queue);
-		ch->notify_queue = NULL;
-	}
-}
-
-/*
  * spin_lock_irqsave() is expected to be held on entry.
  */
 static void
@@ -717,9 +97,9 @@ xpc_process_disconnect(struct xpc_channel *ch, unsigned long *irq_flags)
 	DBUG_ON((ch->flags & XPC_C_CONNECTEDCALLOUT_MADE) &&
 		!(ch->flags & XPC_C_DISCONNECTINGCALLOUT_MADE));
 
-	if (part->act_state == XPC_P_DEACTIVATING) {
+	if (part->act_state == XPC_P_AS_DEACTIVATING) {
 		/* can't proceed until the other side disengages from us */
-		if (xpc_partition_engaged(1UL << ch->partid))
+		if (xpc_partition_engaged(ch->partid))
 			return;
 
 	} else {
@@ -731,7 +111,7 @@ xpc_process_disconnect(struct xpc_channel *ch, unsigned long *irq_flags)
 
 		if (!(ch->flags & XPC_C_CLOSEREPLY)) {
 			ch->flags |= XPC_C_CLOSEREPLY;
-			xpc_IPI_send_closereply(ch, irq_flags);
+			xpc_send_chctl_closereply(ch, irq_flags);
 		}
 
 		if (!(ch->flags & XPC_C_RCLOSEREPLY))
@@ -740,8 +120,8 @@ xpc_process_disconnect(struct xpc_channel *ch, unsigned long *irq_flags)
 
 	/* wake those waiting for notify completion */
 	if (atomic_read(&ch->n_to_notify) > 0) {
-		/* >>> we do callout while holding ch->lock */
-		xpc_notify_senders(ch, ch->reason, ch->w_local_GP.put);
+		/* we do callout while holding ch->lock, callout can't block */
+		xpc_notify_senders_of_disconnect(ch);
 	}
 
 	/* both sides are disconnected now */
@@ -752,10 +132,24 @@ xpc_process_disconnect(struct xpc_channel *ch, unsigned long *irq_flags)
 		spin_lock_irqsave(&ch->lock, *irq_flags);
 	}
 
+	DBUG_ON(atomic_read(&ch->n_to_notify) != 0);
+
 	/* it's now safe to free the channel's message queues */
-	xpc_free_msgqueues(ch);
+	xpc_teardown_msg_structures(ch);
 
-	/* mark disconnected, clear all other flags except XPC_C_WDISCONNECT */
+	ch->func = NULL;
+	ch->key = NULL;
+	ch->entry_size = 0;
+	ch->local_nentries = 0;
+	ch->remote_nentries = 0;
+	ch->kthreads_assigned_limit = 0;
+	ch->kthreads_idle_limit = 0;
+
+	/*
+	 * Mark the channel disconnected and clear all other flags, including
+	 * XPC_C_SETUP (because of call to xpc_teardown_msg_structures()) but
+	 * not including XPC_C_WDISCONNECT (if it was set).
+	 */
 	ch->flags = (XPC_C_DISCONNECTED | (ch->flags & XPC_C_WDISCONNECT));
 
 	atomic_dec(&part->nchannels_active);
@@ -768,15 +162,15 @@ xpc_process_disconnect(struct xpc_channel *ch, unsigned long *irq_flags)
 	if (ch->flags & XPC_C_WDISCONNECT) {
 		/* we won't lose the CPU since we're holding ch->lock */
 		complete(&ch->wdisconnect_wait);
-	} else if (ch->delayed_IPI_flags) {
-		if (part->act_state != XPC_P_DEACTIVATING) {
-			/* time to take action on any delayed IPI flags */
-			spin_lock(&part->IPI_lock);
-			XPC_SET_IPI_FLAGS(part->local_IPI_amo, ch->number,
-					  ch->delayed_IPI_flags);
-			spin_unlock(&part->IPI_lock);
+	} else if (ch->delayed_chctl_flags) {
+		if (part->act_state != XPC_P_AS_DEACTIVATING) {
+			/* time to take action on any delayed chctl flags */
+			spin_lock(&part->chctl_lock);
+			part->chctl.flags[ch->number] |=
+			    ch->delayed_chctl_flags;
+			spin_unlock(&part->chctl_lock);
 		}
-		ch->delayed_IPI_flags = 0;
+		ch->delayed_chctl_flags = 0;
 	}
 }
 
@@ -784,8 +178,8 @@ xpc_process_disconnect(struct xpc_channel *ch, unsigned long *irq_flags)
  * Process a change in the channel's remote connection state.
  */
 static void
-xpc_process_openclose_IPI(struct xpc_partition *part, int ch_number,
-			  u8 IPI_flags)
+xpc_process_openclose_chctl_flags(struct xpc_partition *part, int ch_number,
+				  u8 chctl_flags)
 {
 	unsigned long irq_flags;
 	struct xpc_openclose_args *args =
@@ -800,24 +194,24 @@ again:
 	if ((ch->flags & XPC_C_DISCONNECTED) &&
 	    (ch->flags & XPC_C_WDISCONNECT)) {
 		/*
-		 * Delay processing IPI flags until thread waiting disconnect
+		 * Delay processing chctl flags until thread waiting disconnect
 		 * has had a chance to see that the channel is disconnected.
 		 */
-		ch->delayed_IPI_flags |= IPI_flags;
+		ch->delayed_chctl_flags |= chctl_flags;
 		spin_unlock_irqrestore(&ch->lock, irq_flags);
 		return;
 	}
 
-	if (IPI_flags & XPC_IPI_CLOSEREQUEST) {
+	if (chctl_flags & XPC_CHCTL_CLOSEREQUEST) {
 
-		dev_dbg(xpc_chan, "XPC_IPI_CLOSEREQUEST (reason=%d) received "
+		dev_dbg(xpc_chan, "XPC_CHCTL_CLOSEREQUEST (reason=%d) received "
 			"from partid=%d, channel=%d\n", args->reason,
 			ch->partid, ch->number);
 
 		/*
 		 * If RCLOSEREQUEST is set, we're probably waiting for
 		 * RCLOSEREPLY. We should find it and a ROPENREQUEST packed
-		 * with this RCLOSEREQUEST in the IPI_flags.
+		 * with this RCLOSEREQUEST in the chctl_flags.
 		 */
 
 		if (ch->flags & XPC_C_RCLOSEREQUEST) {
@@ -826,8 +220,8 @@ again:
 			DBUG_ON(!(ch->flags & XPC_C_CLOSEREPLY));
 			DBUG_ON(ch->flags & XPC_C_RCLOSEREPLY);
 
-			DBUG_ON(!(IPI_flags & XPC_IPI_CLOSEREPLY));
-			IPI_flags &= ~XPC_IPI_CLOSEREPLY;
+			DBUG_ON(!(chctl_flags & XPC_CHCTL_CLOSEREPLY));
+			chctl_flags &= ~XPC_CHCTL_CLOSEREPLY;
 			ch->flags |= XPC_C_RCLOSEREPLY;
 
 			/* both sides have finished disconnecting */
@@ -837,17 +231,15 @@ again:
 		}
 
 		if (ch->flags & XPC_C_DISCONNECTED) {
-			if (!(IPI_flags & XPC_IPI_OPENREQUEST)) {
-				if ((XPC_GET_IPI_FLAGS(part->local_IPI_amo,
-						       ch_number) &
-				     XPC_IPI_OPENREQUEST)) {
-
-					DBUG_ON(ch->delayed_IPI_flags != 0);
-					spin_lock(&part->IPI_lock);
-					XPC_SET_IPI_FLAGS(part->local_IPI_amo,
-							  ch_number,
-							  XPC_IPI_CLOSEREQUEST);
-					spin_unlock(&part->IPI_lock);
+			if (!(chctl_flags & XPC_CHCTL_OPENREQUEST)) {
+				if (part->chctl.flags[ch_number] &
+				    XPC_CHCTL_OPENREQUEST) {
+
+					DBUG_ON(ch->delayed_chctl_flags != 0);
+					spin_lock(&part->chctl_lock);
+					part->chctl.flags[ch_number] |=
+					    XPC_CHCTL_CLOSEREQUEST;
+					spin_unlock(&part->chctl_lock);
 				}
 				spin_unlock_irqrestore(&ch->lock, irq_flags);
 				return;
@@ -860,7 +252,7 @@ again:
 			ch->flags |= (XPC_C_CONNECTING | XPC_C_ROPENREQUEST);
 		}
 
-		IPI_flags &= ~(XPC_IPI_OPENREQUEST | XPC_IPI_OPENREPLY);
+		chctl_flags &= ~(XPC_CHCTL_OPENREQUEST | XPC_CHCTL_OPENREPLY);
 
 		/*
 		 * The meaningful CLOSEREQUEST connection state fields are:
@@ -878,7 +270,7 @@ again:
 
 			XPC_DISCONNECT_CHANNEL(ch, reason, &irq_flags);
 
-			DBUG_ON(IPI_flags & XPC_IPI_CLOSEREPLY);
+			DBUG_ON(chctl_flags & XPC_CHCTL_CLOSEREPLY);
 			spin_unlock_irqrestore(&ch->lock, irq_flags);
 			return;
 		}
@@ -886,13 +278,13 @@ again:
 		xpc_process_disconnect(ch, &irq_flags);
 	}
 
-	if (IPI_flags & XPC_IPI_CLOSEREPLY) {
+	if (chctl_flags & XPC_CHCTL_CLOSEREPLY) {
 
-		dev_dbg(xpc_chan, "XPC_IPI_CLOSEREPLY received from partid=%d,"
-			" channel=%d\n", ch->partid, ch->number);
+		dev_dbg(xpc_chan, "XPC_CHCTL_CLOSEREPLY received from partid="
+			"%d, channel=%d\n", ch->partid, ch->number);
 
 		if (ch->flags & XPC_C_DISCONNECTED) {
-			DBUG_ON(part->act_state != XPC_P_DEACTIVATING);
+			DBUG_ON(part->act_state != XPC_P_AS_DEACTIVATING);
 			spin_unlock_irqrestore(&ch->lock, irq_flags);
 			return;
 		}
@@ -900,15 +292,14 @@ again:
 		DBUG_ON(!(ch->flags & XPC_C_CLOSEREQUEST));
 
 		if (!(ch->flags & XPC_C_RCLOSEREQUEST)) {
-			if ((XPC_GET_IPI_FLAGS(part->local_IPI_amo, ch_number)
-			     & XPC_IPI_CLOSEREQUEST)) {
-
-				DBUG_ON(ch->delayed_IPI_flags != 0);
-				spin_lock(&part->IPI_lock);
-				XPC_SET_IPI_FLAGS(part->local_IPI_amo,
-						  ch_number,
-						  XPC_IPI_CLOSEREPLY);
-				spin_unlock(&part->IPI_lock);
+			if (part->chctl.flags[ch_number] &
+			    XPC_CHCTL_CLOSEREQUEST) {
+
+				DBUG_ON(ch->delayed_chctl_flags != 0);
+				spin_lock(&part->chctl_lock);
+				part->chctl.flags[ch_number] |=
+				    XPC_CHCTL_CLOSEREPLY;
+				spin_unlock(&part->chctl_lock);
 			}
 			spin_unlock_irqrestore(&ch->lock, irq_flags);
 			return;
@@ -922,21 +313,21 @@ again:
 		}
 	}
 
-	if (IPI_flags & XPC_IPI_OPENREQUEST) {
+	if (chctl_flags & XPC_CHCTL_OPENREQUEST) {
 
-		dev_dbg(xpc_chan, "XPC_IPI_OPENREQUEST (msg_size=%d, "
+		dev_dbg(xpc_chan, "XPC_CHCTL_OPENREQUEST (entry_size=%d, "
 			"local_nentries=%d) received from partid=%d, "
-			"channel=%d\n", args->msg_size, args->local_nentries,
+			"channel=%d\n", args->entry_size, args->local_nentries,
 			ch->partid, ch->number);
 
-		if (part->act_state == XPC_P_DEACTIVATING ||
+		if (part->act_state == XPC_P_AS_DEACTIVATING ||
 		    (ch->flags & XPC_C_ROPENREQUEST)) {
 			spin_unlock_irqrestore(&ch->lock, irq_flags);
 			return;
 		}
 
 		if (ch->flags & (XPC_C_DISCONNECTING | XPC_C_WDISCONNECT)) {
-			ch->delayed_IPI_flags |= XPC_IPI_OPENREQUEST;
+			ch->delayed_chctl_flags |= XPC_CHCTL_OPENREQUEST;
 			spin_unlock_irqrestore(&ch->lock, irq_flags);
 			return;
 		}
@@ -947,10 +338,10 @@ again:
 
 		/*
 		 * The meaningful OPENREQUEST connection state fields are:
-		 *      msg_size = size of channel's messages in bytes
+		 *      entry_size = size of channel's messages in bytes
 		 *      local_nentries = remote partition's local_nentries
 		 */
-		if (args->msg_size == 0 || args->local_nentries == 0) {
+		if (args->entry_size == 0 || args->local_nentries == 0) {
 			/* assume OPENREQUEST was delayed by mistake */
 			spin_unlock_irqrestore(&ch->lock, irq_flags);
 			return;
@@ -960,14 +351,14 @@ again:
 		ch->remote_nentries = args->local_nentries;
 
 		if (ch->flags & XPC_C_OPENREQUEST) {
-			if (args->msg_size != ch->msg_size) {
+			if (args->entry_size != ch->entry_size) {
 				XPC_DISCONNECT_CHANNEL(ch, xpUnequalMsgSizes,
 						       &irq_flags);
 				spin_unlock_irqrestore(&ch->lock, irq_flags);
 				return;
 			}
 		} else {
-			ch->msg_size = args->msg_size;
+			ch->entry_size = args->entry_size;
 
 			XPC_SET_REASON(ch, 0, 0);
 			ch->flags &= ~XPC_C_DISCONNECTED;
@@ -978,13 +369,13 @@ again:
 		xpc_process_connect(ch, &irq_flags);
 	}
 
-	if (IPI_flags & XPC_IPI_OPENREPLY) {
+	if (chctl_flags & XPC_CHCTL_OPENREPLY) {
 
-		dev_dbg(xpc_chan, "XPC_IPI_OPENREPLY (local_msgqueue_pa=0x%lx, "
-			"local_nentries=%d, remote_nentries=%d) received from "
-			"partid=%d, channel=%d\n", args->local_msgqueue_pa,
-			args->local_nentries, args->remote_nentries,
-			ch->partid, ch->number);
+		dev_dbg(xpc_chan, "XPC_CHCTL_OPENREPLY (local_msgqueue_pa="
+			"0x%lx, local_nentries=%d, remote_nentries=%d) "
+			"received from partid=%d, channel=%d\n",
+			args->local_msgqueue_pa, args->local_nentries,
+			args->remote_nentries, ch->partid, ch->number);
 
 		if (ch->flags & (XPC_C_DISCONNECTING | XPC_C_DISCONNECTED)) {
 			spin_unlock_irqrestore(&ch->lock, irq_flags);
@@ -1012,10 +403,10 @@ again:
 		DBUG_ON(args->remote_nentries == 0);
 
 		ch->flags |= XPC_C_ROPENREPLY;
-		ch->remote_msgqueue_pa = args->local_msgqueue_pa;
+		xpc_save_remote_msgqueue_pa(ch, args->local_msgqueue_pa);
 
 		if (args->local_nentries < ch->remote_nentries) {
-			dev_dbg(xpc_chan, "XPC_IPI_OPENREPLY: new "
+			dev_dbg(xpc_chan, "XPC_CHCTL_OPENREPLY: new "
 				"remote_nentries=%d, old remote_nentries=%d, "
 				"partid=%d, channel=%d\n",
 				args->local_nentries, ch->remote_nentries,
@@ -1024,7 +415,7 @@ again:
 			ch->remote_nentries = args->local_nentries;
 		}
 		if (args->remote_nentries < ch->local_nentries) {
-			dev_dbg(xpc_chan, "XPC_IPI_OPENREPLY: new "
+			dev_dbg(xpc_chan, "XPC_CHCTL_OPENREPLY: new "
 				"local_nentries=%d, old local_nentries=%d, "
 				"partid=%d, channel=%d\n",
 				args->remote_nentries, ch->local_nentries,
@@ -1082,7 +473,7 @@ xpc_connect_channel(struct xpc_channel *ch)
 	ch->local_nentries = registration->nentries;
 
 	if (ch->flags & XPC_C_ROPENREQUEST) {
-		if (registration->msg_size != ch->msg_size) {
+		if (registration->entry_size != ch->entry_size) {
 			/* the local and remote sides aren't the same */
 
 			/*
@@ -1101,7 +492,7 @@ xpc_connect_channel(struct xpc_channel *ch)
 			return xpUnequalMsgSizes;
 		}
 	} else {
-		ch->msg_size = registration->msg_size;
+		ch->entry_size = registration->entry_size;
 
 		XPC_SET_REASON(ch, 0, 0);
 		ch->flags &= ~XPC_C_DISCONNECTED;
@@ -1114,7 +505,7 @@ xpc_connect_channel(struct xpc_channel *ch)
 	/* initiate the connection */
 
 	ch->flags |= (XPC_C_OPENREQUEST | XPC_C_CONNECTING);
-	xpc_IPI_send_openrequest(ch, &irq_flags);
+	xpc_send_chctl_openrequest(ch, &irq_flags);
 
 	xpc_process_connect(ch, &irq_flags);
 
@@ -1123,152 +514,16 @@ xpc_connect_channel(struct xpc_channel *ch)
 	return xpSuccess;
 }
 
-/*
- * Clear some of the msg flags in the local message queue.
- */
-static inline void
-xpc_clear_local_msgqueue_flags(struct xpc_channel *ch)
-{
-	struct xpc_msg *msg;
-	s64 get;
-
-	get = ch->w_remote_GP.get;
-	do {
-		msg = (struct xpc_msg *)((u64)ch->local_msgqueue +
-					 (get % ch->local_nentries) *
-					 ch->msg_size);
-		msg->flags = 0;
-	} while (++get < ch->remote_GP.get);
-}
-
-/*
- * Clear some of the msg flags in the remote message queue.
- */
-static inline void
-xpc_clear_remote_msgqueue_flags(struct xpc_channel *ch)
-{
-	struct xpc_msg *msg;
-	s64 put;
-
-	put = ch->w_remote_GP.put;
-	do {
-		msg = (struct xpc_msg *)((u64)ch->remote_msgqueue +
-					 (put % ch->remote_nentries) *
-					 ch->msg_size);
-		msg->flags = 0;
-	} while (++put < ch->remote_GP.put);
-}
-
-static void
-xpc_process_msg_IPI(struct xpc_partition *part, int ch_number)
-{
-	struct xpc_channel *ch = &part->channels[ch_number];
-	int nmsgs_sent;
-
-	ch->remote_GP = part->remote_GPs[ch_number];
-
-	/* See what, if anything, has changed for each connected channel */
-
-	xpc_msgqueue_ref(ch);
-
-	if (ch->w_remote_GP.get == ch->remote_GP.get &&
-	    ch->w_remote_GP.put == ch->remote_GP.put) {
-		/* nothing changed since GPs were last pulled */
-		xpc_msgqueue_deref(ch);
-		return;
-	}
-
-	if (!(ch->flags & XPC_C_CONNECTED)) {
-		xpc_msgqueue_deref(ch);
-		return;
-	}
-
-	/*
-	 * First check to see if messages recently sent by us have been
-	 * received by the other side. (The remote GET value will have
-	 * changed since we last looked at it.)
-	 */
-
-	if (ch->w_remote_GP.get != ch->remote_GP.get) {
-
-		/*
-		 * We need to notify any senders that want to be notified
-		 * that their sent messages have been received by their
-		 * intended recipients. We need to do this before updating
-		 * w_remote_GP.get so that we don't allocate the same message
-		 * queue entries prematurely (see xpc_allocate_msg()).
-		 */
-		if (atomic_read(&ch->n_to_notify) > 0) {
-			/*
-			 * Notify senders that messages sent have been
-			 * received and delivered by the other side.
-			 */
-			xpc_notify_senders(ch, xpMsgDelivered,
-					   ch->remote_GP.get);
-		}
-
-		/*
-		 * Clear msg->flags in previously sent messages, so that
-		 * they're ready for xpc_allocate_msg().
-		 */
-		xpc_clear_local_msgqueue_flags(ch);
-
-		ch->w_remote_GP.get = ch->remote_GP.get;
-
-		dev_dbg(xpc_chan, "w_remote_GP.get changed to %ld, partid=%d, "
-			"channel=%d\n", ch->w_remote_GP.get, ch->partid,
-			ch->number);
-
-		/*
-		 * If anyone was waiting for message queue entries to become
-		 * available, wake them up.
-		 */
-		if (atomic_read(&ch->n_on_msg_allocate_wq) > 0)
-			wake_up(&ch->msg_allocate_wq);
-	}
-
-	/*
-	 * Now check for newly sent messages by the other side. (The remote
-	 * PUT value will have changed since we last looked at it.)
-	 */
-
-	if (ch->w_remote_GP.put != ch->remote_GP.put) {
-		/*
-		 * Clear msg->flags in previously received messages, so that
-		 * they're ready for xpc_get_deliverable_msg().
-		 */
-		xpc_clear_remote_msgqueue_flags(ch);
-
-		ch->w_remote_GP.put = ch->remote_GP.put;
-
-		dev_dbg(xpc_chan, "w_remote_GP.put changed to %ld, partid=%d, "
-			"channel=%d\n", ch->w_remote_GP.put, ch->partid,
-			ch->number);
-
-		nmsgs_sent = ch->w_remote_GP.put - ch->w_local_GP.get;
-		if (nmsgs_sent > 0) {
-			dev_dbg(xpc_chan, "msgs waiting to be copied and "
-				"delivered=%d, partid=%d, channel=%d\n",
-				nmsgs_sent, ch->partid, ch->number);
-
-			if (ch->flags & XPC_C_CONNECTEDCALLOUT_MADE)
-				xpc_activate_kthreads(ch, nmsgs_sent);
-		}
-	}
-
-	xpc_msgqueue_deref(ch);
-}
-
 void
-xpc_process_channel_activity(struct xpc_partition *part)
+xpc_process_sent_chctl_flags(struct xpc_partition *part)
 {
 	unsigned long irq_flags;
-	u64 IPI_amo, IPI_flags;
+	union xpc_channel_ctl_flags chctl;
 	struct xpc_channel *ch;
 	int ch_number;
 	u32 ch_flags;
 
-	IPI_amo = xpc_get_IPI_flags(part);
+	chctl.all_flags = xpc_get_chctl_all_flags(part);
 
 	/*
 	 * Initiate channel connections for registered channels.
@@ -1281,14 +536,14 @@ xpc_process_channel_activity(struct xpc_partition *part)
 		ch = &part->channels[ch_number];
 
 		/*
-		 * Process any open or close related IPI flags, and then deal
+		 * Process any open or close related chctl flags, and then deal
 		 * with connecting or disconnecting the channel as required.
 		 */
 
-		IPI_flags = XPC_GET_IPI_FLAGS(IPI_amo, ch_number);
-
-		if (XPC_ANY_OPENCLOSE_IPI_FLAGS_SET(IPI_flags))
-			xpc_process_openclose_IPI(part, ch_number, IPI_flags);
+		if (chctl.flags[ch_number] & XPC_OPENCLOSE_CHCTL_FLAGS) {
+			xpc_process_openclose_chctl_flags(part, ch_number,
+							chctl.flags[ch_number]);
+		}
 
 		ch_flags = ch->flags;	/* need an atomic snapshot of flags */
 
@@ -1299,7 +554,7 @@ xpc_process_channel_activity(struct xpc_partition *part)
 			continue;
 		}
 
-		if (part->act_state == XPC_P_DEACTIVATING)
+		if (part->act_state == XPC_P_AS_DEACTIVATING)
 			continue;
 
 		if (!(ch_flags & XPC_C_CONNECTED)) {
@@ -1315,13 +570,13 @@ xpc_process_channel_activity(struct xpc_partition *part)
 		}
 
 		/*
-		 * Process any message related IPI flags, this may involve the
-		 * activation of kthreads to deliver any pending messages sent
-		 * from the other partition.
+		 * Process any message related chctl flags, this may involve
+		 * the activation of kthreads to deliver any pending messages
+		 * sent from the other partition.
 		 */
 
-		if (XPC_ANY_MSG_IPI_FLAGS_SET(IPI_flags))
-			xpc_process_msg_IPI(part, ch_number);
+		if (chctl.flags[ch_number] & XPC_MSG_CHCTL_FLAGS)
+			xpc_process_msg_chctl_flags(part, ch_number);
 	}
 }
 
@@ -1369,59 +624,6 @@ xpc_partition_going_down(struct xpc_partition *part, enum xp_retval reason)
 }
 
 /*
- * Teardown the infrastructure necessary to support XPartition Communication
- * between the specified remote partition and the local one.
- */
-void
-xpc_teardown_infrastructure(struct xpc_partition *part)
-{
-	short partid = XPC_PARTID(part);
-
-	/*
-	 * We start off by making this partition inaccessible to local
-	 * processes by marking it as no longer setup. Then we make it
-	 * inaccessible to remote processes by clearing the XPC per partition
-	 * specific variable's magic # (which indicates that these variables
-	 * are no longer valid) and by ignoring all XPC notify IPIs sent to
-	 * this partition.
-	 */
-
-	DBUG_ON(atomic_read(&part->nchannels_engaged) != 0);
-	DBUG_ON(atomic_read(&part->nchannels_active) != 0);
-	DBUG_ON(part->setup_state != XPC_P_SETUP);
-	part->setup_state = XPC_P_WTEARDOWN;
-
-	xpc_vars_part[partid].magic = 0;
-
-	free_irq(SGI_XPC_NOTIFY, (void *)(u64)partid);
-
-	/*
-	 * Before proceeding with the teardown we have to wait until all
-	 * existing references cease.
-	 */
-	wait_event(part->teardown_wq, (atomic_read(&part->references) == 0));
-
-	/* now we can begin tearing down the infrastructure */
-
-	part->setup_state = XPC_P_TORNDOWN;
-
-	/* in case we've still got outstanding timers registered... */
-	del_timer_sync(&part->dropped_IPI_timer);
-
-	kfree(part->remote_openclose_args_base);
-	part->remote_openclose_args = NULL;
-	kfree(part->local_openclose_args_base);
-	part->local_openclose_args = NULL;
-	kfree(part->remote_GPs_base);
-	part->remote_GPs = NULL;
-	kfree(part->local_GPs_base);
-	part->local_GPs = NULL;
-	kfree(part->channels);
-	part->channels = NULL;
-	part->local_IPI_amo_va = NULL;
-}
-
-/*
  * Called by XP at the time of channel connection registration to cause
  * XPC to establish connections to all currently active partitions.
  */
@@ -1432,9 +634,9 @@ xpc_initiate_connect(int ch_number)
 	struct xpc_partition *part;
 	struct xpc_channel *ch;
 
-	DBUG_ON(ch_number < 0 || ch_number >= XPC_NCHANNELS);
+	DBUG_ON(ch_number < 0 || ch_number >= XPC_MAX_NCHANNELS);
 
-	for (partid = 1; partid < XP_MAX_PARTITIONS; partid++) {
+	for (partid = 0; partid < xp_max_npartitions; partid++) {
 		part = &xpc_partitions[partid];
 
 		if (xpc_part_ref(part)) {
@@ -1488,10 +690,10 @@ xpc_initiate_disconnect(int ch_number)
 	struct xpc_partition *part;
 	struct xpc_channel *ch;
 
-	DBUG_ON(ch_number < 0 || ch_number >= XPC_NCHANNELS);
+	DBUG_ON(ch_number < 0 || ch_number >= XPC_MAX_NCHANNELS);
 
 	/* initiate the channel disconnect for every active partition */
-	for (partid = 1; partid < XP_MAX_PARTITIONS; partid++) {
+	for (partid = 0; partid < xp_max_npartitions; partid++) {
 		part = &xpc_partitions[partid];
 
 		if (xpc_part_ref(part)) {
@@ -1550,7 +752,7 @@ xpc_disconnect_channel(const int line, struct xpc_channel *ch,
 		       XPC_C_ROPENREQUEST | XPC_C_ROPENREPLY |
 		       XPC_C_CONNECTING | XPC_C_CONNECTED);
 
-	xpc_IPI_send_closerequest(ch, irq_flags);
+	xpc_send_chctl_closerequest(ch, irq_flags);
 
 	if (channel_was_connected)
 		ch->flags |= XPC_C_WASCONNECTED;
@@ -1598,7 +800,7 @@ xpc_disconnect_callout(struct xpc_channel *ch, enum xp_retval reason)
  * Wait for a message entry to become available for the specified channel,
  * but don't wait any longer than 1 jiffy.
  */
-static enum xp_retval
+enum xp_retval
 xpc_allocate_msg_wait(struct xpc_channel *ch)
 {
 	enum xp_retval ret;
@@ -1625,315 +827,54 @@ xpc_allocate_msg_wait(struct xpc_channel *ch)
 }
 
 /*
- * Allocate an entry for a message from the message queue associated with the
- * specified channel.
- */
-static enum xp_retval
-xpc_allocate_msg(struct xpc_channel *ch, u32 flags,
-		 struct xpc_msg **address_of_msg)
-{
-	struct xpc_msg *msg;
-	enum xp_retval ret;
-	s64 put;
-
-	/* this reference will be dropped in xpc_send_msg() */
-	xpc_msgqueue_ref(ch);
-
-	if (ch->flags & XPC_C_DISCONNECTING) {
-		xpc_msgqueue_deref(ch);
-		return ch->reason;
-	}
-	if (!(ch->flags & XPC_C_CONNECTED)) {
-		xpc_msgqueue_deref(ch);
-		return xpNotConnected;
-	}
-
-	/*
-	 * Get the next available message entry from the local message queue.
-	 * If none are available, we'll make sure that we grab the latest
-	 * GP values.
-	 */
-	ret = xpTimeout;
-
-	while (1) {
-
-		put = ch->w_local_GP.put;
-		rmb();	/* guarantee that .put loads before .get */
-		if (put - ch->w_remote_GP.get < ch->local_nentries) {
-
-			/* There are available message entries. We need to try
-			 * to secure one for ourselves. We'll do this by trying
-			 * to increment w_local_GP.put as long as someone else
-			 * doesn't beat us to it. If they do, we'll have to
-			 * try again.
-			 */
-			if (cmpxchg(&ch->w_local_GP.put, put, put + 1) == put) {
-				/* we got the entry referenced by put */
-				break;
-			}
-			continue;	/* try again */
-		}
-
-		/*
-		 * There aren't any available msg entries at this time.
-		 *
-		 * In waiting for a message entry to become available,
-		 * we set a timeout in case the other side is not
-		 * sending completion IPIs. This lets us fake an IPI
-		 * that will cause the IPI handler to fetch the latest
-		 * GP values as if an IPI was sent by the other side.
-		 */
-		if (ret == xpTimeout)
-			xpc_IPI_send_local_msgrequest(ch);
-
-		if (flags & XPC_NOWAIT) {
-			xpc_msgqueue_deref(ch);
-			return xpNoWait;
-		}
-
-		ret = xpc_allocate_msg_wait(ch);
-		if (ret != xpInterrupted && ret != xpTimeout) {
-			xpc_msgqueue_deref(ch);
-			return ret;
-		}
-	}
-
-	/* get the message's address and initialize it */
-	msg = (struct xpc_msg *)((u64)ch->local_msgqueue +
-				 (put % ch->local_nentries) * ch->msg_size);
-
-	DBUG_ON(msg->flags != 0);
-	msg->number = put;
-
-	dev_dbg(xpc_chan, "w_local_GP.put changed to %ld; msg=0x%p, "
-		"msg_number=%ld, partid=%d, channel=%d\n", put + 1,
-		(void *)msg, msg->number, ch->partid, ch->number);
-
-	*address_of_msg = msg;
-
-	return xpSuccess;
-}
-
-/*
- * Allocate an entry for a message from the message queue associated with the
- * specified channel. NOTE that this routine can sleep waiting for a message
- * entry to become available. To not sleep, pass in the XPC_NOWAIT flag.
+ * Send a message that contains the user's payload on the specified channel
+ * connected to the specified partition.
  *
- * Arguments:
+ * NOTE that this routine can sleep waiting for a message entry to become
+ * available. To not sleep, pass in the XPC_NOWAIT flag.
  *
- *	partid - ID of partition to which the channel is connected.
- *	ch_number - channel #.
- *	flags - see xpc.h for valid flags.
- *	payload - address of the allocated payload area pointer (filled in on
- * 	          return) in which the user-defined message is constructed.
- */
-enum xp_retval
-xpc_initiate_allocate(short partid, int ch_number, u32 flags, void **payload)
-{
-	struct xpc_partition *part = &xpc_partitions[partid];
-	enum xp_retval ret = xpUnknownReason;
-	struct xpc_msg *msg = NULL;
-
-	DBUG_ON(partid <= 0 || partid >= XP_MAX_PARTITIONS);
-	DBUG_ON(ch_number < 0 || ch_number >= part->nchannels);
-
-	*payload = NULL;
-
-	if (xpc_part_ref(part)) {
-		ret = xpc_allocate_msg(&part->channels[ch_number], flags, &msg);
-		xpc_part_deref(part);
-
-		if (msg != NULL)
-			*payload = &msg->payload;
-	}
-
-	return ret;
-}
-
-/*
- * Now we actually send the messages that are ready to be sent by advancing
- * the local message queue's Put value and then send an IPI to the recipient
- * partition.
- */
-static void
-xpc_send_msgs(struct xpc_channel *ch, s64 initial_put)
-{
-	struct xpc_msg *msg;
-	s64 put = initial_put + 1;
-	int send_IPI = 0;
-
-	while (1) {
-
-		while (1) {
-			if (put == ch->w_local_GP.put)
-				break;
-
-			msg = (struct xpc_msg *)((u64)ch->local_msgqueue +
-						 (put % ch->local_nentries) *
-						 ch->msg_size);
-
-			if (!(msg->flags & XPC_M_READY))
-				break;
-
-			put++;
-		}
-
-		if (put == initial_put) {
-			/* nothing's changed */
-			break;
-		}
-
-		if (cmpxchg_rel(&ch->local_GP->put, initial_put, put) !=
-		    initial_put) {
-			/* someone else beat us to it */
-			DBUG_ON(ch->local_GP->put < initial_put);
-			break;
-		}
-
-		/* we just set the new value of local_GP->put */
-
-		dev_dbg(xpc_chan, "local_GP->put changed to %ld, partid=%d, "
-			"channel=%d\n", put, ch->partid, ch->number);
-
-		send_IPI = 1;
-
-		/*
-		 * We need to ensure that the message referenced by
-		 * local_GP->put is not XPC_M_READY or that local_GP->put
-		 * equals w_local_GP.put, so we'll go have a look.
-		 */
-		initial_put = put;
-	}
-
-	if (send_IPI)
-		xpc_IPI_send_msgrequest(ch);
-}
-
-/*
- * Common code that does the actual sending of the message by advancing the
- * local message queue's Put value and sends an IPI to the partition the
- * message is being sent to.
- */
-static enum xp_retval
-xpc_send_msg(struct xpc_channel *ch, struct xpc_msg *msg, u8 notify_type,
-	     xpc_notify_func func, void *key)
-{
-	enum xp_retval ret = xpSuccess;
-	struct xpc_notify *notify = notify;
-	s64 put, msg_number = msg->number;
-
-	DBUG_ON(notify_type == XPC_N_CALL && func == NULL);
-	DBUG_ON((((u64)msg - (u64)ch->local_msgqueue) / ch->msg_size) !=
-		msg_number % ch->local_nentries);
-	DBUG_ON(msg->flags & XPC_M_READY);
-
-	if (ch->flags & XPC_C_DISCONNECTING) {
-		/* drop the reference grabbed in xpc_allocate_msg() */
-		xpc_msgqueue_deref(ch);
-		return ch->reason;
-	}
-
-	if (notify_type != 0) {
-		/*
-		 * Tell the remote side to send an ACK interrupt when the
-		 * message has been delivered.
-		 */
-		msg->flags |= XPC_M_INTERRUPT;
-
-		atomic_inc(&ch->n_to_notify);
-
-		notify = &ch->notify_queue[msg_number % ch->local_nentries];
-		notify->func = func;
-		notify->key = key;
-		notify->type = notify_type;
-
-		/* >>> is a mb() needed here? */
-
-		if (ch->flags & XPC_C_DISCONNECTING) {
-			/*
-			 * An error occurred between our last error check and
-			 * this one. We will try to clear the type field from
-			 * the notify entry. If we succeed then
-			 * xpc_disconnect_channel() didn't already process
-			 * the notify entry.
-			 */
-			if (cmpxchg(&notify->type, notify_type, 0) ==
-			    notify_type) {
-				atomic_dec(&ch->n_to_notify);
-				ret = ch->reason;
-			}
-
-			/* drop the reference grabbed in xpc_allocate_msg() */
-			xpc_msgqueue_deref(ch);
-			return ret;
-		}
-	}
-
-	msg->flags |= XPC_M_READY;
-
-	/*
-	 * The preceding store of msg->flags must occur before the following
-	 * load of ch->local_GP->put.
-	 */
-	mb();
-
-	/* see if the message is next in line to be sent, if so send it */
-
-	put = ch->local_GP->put;
-	if (put == msg_number)
-		xpc_send_msgs(ch, put);
-
-	/* drop the reference grabbed in xpc_allocate_msg() */
-	xpc_msgqueue_deref(ch);
-	return ret;
-}
-
-/*
- * Send a message previously allocated using xpc_initiate_allocate() on the
- * specified channel connected to the specified partition.
- *
- * This routine will not wait for the message to be received, nor will
- * notification be given when it does happen. Once this routine has returned
- * the message entry allocated via xpc_initiate_allocate() is no longer
- * accessable to the caller.
- *
- * This routine, although called by users, does not call xpc_part_ref() to
- * ensure that the partition infrastructure is in place. It relies on the
- * fact that we called xpc_msgqueue_ref() in xpc_allocate_msg().
+ * Once sent, this routine will not wait for the message to be received, nor
+ * will notification be given when it does happen.
  *
  * Arguments:
  *
  *	partid - ID of partition to which the channel is connected.
  *	ch_number - channel # to send message on.
- *	payload - pointer to the payload area allocated via
- *			xpc_initiate_allocate().
+ *	flags - see xp.h for valid flags.
+ *	payload - pointer to the payload which is to be sent.
+ *	payload_size - size of the payload in bytes.
  */
 enum xp_retval
-xpc_initiate_send(short partid, int ch_number, void *payload)
+xpc_initiate_send(short partid, int ch_number, u32 flags, void *payload,
+		  u16 payload_size)
 {
 	struct xpc_partition *part = &xpc_partitions[partid];
-	struct xpc_msg *msg = XPC_MSG_ADDRESS(payload);
-	enum xp_retval ret;
+	enum xp_retval ret = xpUnknownReason;
 
-	dev_dbg(xpc_chan, "msg=0x%p, partid=%d, channel=%d\n", (void *)msg,
+	dev_dbg(xpc_chan, "payload=0x%p, partid=%d, channel=%d\n", payload,
 		partid, ch_number);
 
-	DBUG_ON(partid <= 0 || partid >= XP_MAX_PARTITIONS);
+	DBUG_ON(partid < 0 || partid >= xp_max_npartitions);
 	DBUG_ON(ch_number < 0 || ch_number >= part->nchannels);
-	DBUG_ON(msg == NULL);
+	DBUG_ON(payload == NULL);
 
-	ret = xpc_send_msg(&part->channels[ch_number], msg, 0, NULL, NULL);
+	if (xpc_part_ref(part)) {
+		ret = xpc_send_payload(&part->channels[ch_number], flags,
+				       payload, payload_size, 0, NULL, NULL);
+		xpc_part_deref(part);
+	}
 
 	return ret;
 }
 
 /*
- * Send a message previously allocated using xpc_initiate_allocate on the
- * specified channel connected to the specified partition.
+ * Send a message that contains the user's payload on the specified channel
+ * connected to the specified partition.
  *
- * This routine will not wait for the message to be sent. Once this routine
- * has returned the message entry allocated via xpc_initiate_allocate() is no
- * longer accessable to the caller.
+ * NOTE that this routine can sleep waiting for a message entry to become
+ * available. To not sleep, pass in the XPC_NOWAIT flag.
+ *
+ * This routine will not wait for the message to be sent or received.
  *
  * Once the remote end of the channel has received the message, the function
  * passed as an argument to xpc_initiate_send_notify() will be called. This
@@ -1943,158 +884,51 @@ xpc_initiate_send(short partid, int ch_number, void *payload)
  *
  * If this routine returns an error, the caller's function will NOT be called.
  *
- * This routine, although called by users, does not call xpc_part_ref() to
- * ensure that the partition infrastructure is in place. It relies on the
- * fact that we called xpc_msgqueue_ref() in xpc_allocate_msg().
- *
  * Arguments:
  *
  *	partid - ID of partition to which the channel is connected.
  *	ch_number - channel # to send message on.
- *	payload - pointer to the payload area allocated via
- *			xpc_initiate_allocate().
+ *	flags - see xp.h for valid flags.
+ *	payload - pointer to the payload which is to be sent.
+ *	payload_size - size of the payload in bytes.
  *	func - function to call with asynchronous notification of message
  *		  receipt. THIS FUNCTION MUST BE NON-BLOCKING.
  *	key - user-defined key to be passed to the function when it's called.
  */
 enum xp_retval
-xpc_initiate_send_notify(short partid, int ch_number, void *payload,
-			 xpc_notify_func func, void *key)
+xpc_initiate_send_notify(short partid, int ch_number, u32 flags, void *payload,
+			 u16 payload_size, xpc_notify_func func, void *key)
 {
 	struct xpc_partition *part = &xpc_partitions[partid];
-	struct xpc_msg *msg = XPC_MSG_ADDRESS(payload);
-	enum xp_retval ret;
+	enum xp_retval ret = xpUnknownReason;
 
-	dev_dbg(xpc_chan, "msg=0x%p, partid=%d, channel=%d\n", (void *)msg,
+	dev_dbg(xpc_chan, "payload=0x%p, partid=%d, channel=%d\n", payload,
 		partid, ch_number);
 
-	DBUG_ON(partid <= 0 || partid >= XP_MAX_PARTITIONS);
+	DBUG_ON(partid < 0 || partid >= xp_max_npartitions);
 	DBUG_ON(ch_number < 0 || ch_number >= part->nchannels);
-	DBUG_ON(msg == NULL);
+	DBUG_ON(payload == NULL);
 	DBUG_ON(func == NULL);
 
-	ret = xpc_send_msg(&part->channels[ch_number], msg, XPC_N_CALL,
-			   func, key);
-	return ret;
-}
-
-static struct xpc_msg *
-xpc_pull_remote_msg(struct xpc_channel *ch, s64 get)
-{
-	struct xpc_partition *part = &xpc_partitions[ch->partid];
-	struct xpc_msg *remote_msg, *msg;
-	u32 msg_index, nmsgs;
-	u64 msg_offset;
-	enum xp_retval ret;
-
-	if (mutex_lock_interruptible(&ch->msg_to_pull_mutex) != 0) {
-		/* we were interrupted by a signal */
-		return NULL;
-	}
-
-	while (get >= ch->next_msg_to_pull) {
-
-		/* pull as many messages as are ready and able to be pulled */
-
-		msg_index = ch->next_msg_to_pull % ch->remote_nentries;
-
-		DBUG_ON(ch->next_msg_to_pull >= ch->w_remote_GP.put);
-		nmsgs = ch->w_remote_GP.put - ch->next_msg_to_pull;
-		if (msg_index + nmsgs > ch->remote_nentries) {
-			/* ignore the ones that wrap the msg queue for now */
-			nmsgs = ch->remote_nentries - msg_index;
-		}
-
-		msg_offset = msg_index * ch->msg_size;
-		msg = (struct xpc_msg *)((u64)ch->remote_msgqueue + msg_offset);
-		remote_msg = (struct xpc_msg *)(ch->remote_msgqueue_pa +
-						msg_offset);
-
-		ret = xpc_pull_remote_cachelines(part, msg, remote_msg,
-						 nmsgs * ch->msg_size);
-		if (ret != xpSuccess) {
-
-			dev_dbg(xpc_chan, "failed to pull %d msgs starting with"
-				" msg %ld from partition %d, channel=%d, "
-				"ret=%d\n", nmsgs, ch->next_msg_to_pull,
-				ch->partid, ch->number, ret);
-
-			XPC_DEACTIVATE_PARTITION(part, ret);
-
-			mutex_unlock(&ch->msg_to_pull_mutex);
-			return NULL;
-		}
-
-		ch->next_msg_to_pull += nmsgs;
+	if (xpc_part_ref(part)) {
+		ret = xpc_send_payload(&part->channels[ch_number], flags,
+				       payload, payload_size, XPC_N_CALL, func,
+				       key);
+		xpc_part_deref(part);
 	}
-
-	mutex_unlock(&ch->msg_to_pull_mutex);
-
-	/* return the message we were looking for */
-	msg_offset = (get % ch->remote_nentries) * ch->msg_size;
-	msg = (struct xpc_msg *)((u64)ch->remote_msgqueue + msg_offset);
-
-	return msg;
-}
-
-/*
- * Get a message to be delivered.
- */
-static struct xpc_msg *
-xpc_get_deliverable_msg(struct xpc_channel *ch)
-{
-	struct xpc_msg *msg = NULL;
-	s64 get;
-
-	do {
-		if (ch->flags & XPC_C_DISCONNECTING)
-			break;
-
-		get = ch->w_local_GP.get;
-		rmb();	/* guarantee that .get loads before .put */
-		if (get == ch->w_remote_GP.put)
-			break;
-
-		/* There are messages waiting to be pulled and delivered.
-		 * We need to try to secure one for ourselves. We'll do this
-		 * by trying to increment w_local_GP.get and hope that no one
-		 * else beats us to it. If they do, we'll we'll simply have
-		 * to try again for the next one.
-		 */
-
-		if (cmpxchg(&ch->w_local_GP.get, get, get + 1) == get) {
-			/* we got the entry referenced by get */
-
-			dev_dbg(xpc_chan, "w_local_GP.get changed to %ld, "
-				"partid=%d, channel=%d\n", get + 1,
-				ch->partid, ch->number);
-
-			/* pull the message from the remote partition */
-
-			msg = xpc_pull_remote_msg(ch, get);
-
-			DBUG_ON(msg != NULL && msg->number != get);
-			DBUG_ON(msg != NULL && (msg->flags & XPC_M_DONE));
-			DBUG_ON(msg != NULL && !(msg->flags & XPC_M_READY));
-
-			break;
-		}
-
-	} while (1);
-
-	return msg;
+	return ret;
 }
 
 /*
- * Deliver a message to its intended recipient.
+ * Deliver a message's payload to its intended recipient.
  */
 void
-xpc_deliver_msg(struct xpc_channel *ch)
+xpc_deliver_payload(struct xpc_channel *ch)
 {
-	struct xpc_msg *msg;
+	void *payload;
 
-	msg = xpc_get_deliverable_msg(ch);
-	if (msg != NULL) {
+	payload = xpc_get_deliverable_payload(ch);
+	if (payload != NULL) {
 
 		/*
 		 * This ref is taken to protect the payload itself from being
@@ -2106,18 +940,16 @@ xpc_deliver_msg(struct xpc_channel *ch)
 		atomic_inc(&ch->kthreads_active);
 
 		if (ch->func != NULL) {
-			dev_dbg(xpc_chan, "ch->func() called, msg=0x%p, "
-				"msg_number=%ld, partid=%d, channel=%d\n",
-				(void *)msg, msg->number, ch->partid,
+			dev_dbg(xpc_chan, "ch->func() called, payload=0x%p "
+				"partid=%d channel=%d\n", payload, ch->partid,
 				ch->number);
 
 			/* deliver the message to its intended recipient */
-			ch->func(xpMsgReceived, ch->partid, ch->number,
-				 &msg->payload, ch->key);
+			ch->func(xpMsgReceived, ch->partid, ch->number, payload,
+				 ch->key);
 
-			dev_dbg(xpc_chan, "ch->func() returned, msg=0x%p, "
-				"msg_number=%ld, partid=%d, channel=%d\n",
-				(void *)msg, msg->number, ch->partid,
+			dev_dbg(xpc_chan, "ch->func() returned, payload=0x%p "
+				"partid=%d channel=%d\n", payload, ch->partid,
 				ch->number);
 		}
 
@@ -2126,118 +958,31 @@ xpc_deliver_msg(struct xpc_channel *ch)
 }
 
 /*
- * Now we actually acknowledge the messages that have been delivered and ack'd
- * by advancing the cached remote message queue's Get value and if requested
- * send an IPI to the message sender's partition.
- */
-static void
-xpc_acknowledge_msgs(struct xpc_channel *ch, s64 initial_get, u8 msg_flags)
-{
-	struct xpc_msg *msg;
-	s64 get = initial_get + 1;
-	int send_IPI = 0;
-
-	while (1) {
-
-		while (1) {
-			if (get == ch->w_local_GP.get)
-				break;
-
-			msg = (struct xpc_msg *)((u64)ch->remote_msgqueue +
-						 (get % ch->remote_nentries) *
-						 ch->msg_size);
-
-			if (!(msg->flags & XPC_M_DONE))
-				break;
-
-			msg_flags |= msg->flags;
-			get++;
-		}
-
-		if (get == initial_get) {
-			/* nothing's changed */
-			break;
-		}
-
-		if (cmpxchg_rel(&ch->local_GP->get, initial_get, get) !=
-		    initial_get) {
-			/* someone else beat us to it */
-			DBUG_ON(ch->local_GP->get <= initial_get);
-			break;
-		}
-
-		/* we just set the new value of local_GP->get */
-
-		dev_dbg(xpc_chan, "local_GP->get changed to %ld, partid=%d, "
-			"channel=%d\n", get, ch->partid, ch->number);
-
-		send_IPI = (msg_flags & XPC_M_INTERRUPT);
-
-		/*
-		 * We need to ensure that the message referenced by
-		 * local_GP->get is not XPC_M_DONE or that local_GP->get
-		 * equals w_local_GP.get, so we'll go have a look.
-		 */
-		initial_get = get;
-	}
-
-	if (send_IPI)
-		xpc_IPI_send_msgrequest(ch);
-}
-
-/*
- * Acknowledge receipt of a delivered message.
- *
- * If a message has XPC_M_INTERRUPT set, send an interrupt to the partition
- * that sent the message.
+ * Acknowledge receipt of a delivered message's payload.
  *
  * This function, although called by users, does not call xpc_part_ref() to
  * ensure that the partition infrastructure is in place. It relies on the
- * fact that we called xpc_msgqueue_ref() in xpc_deliver_msg().
+ * fact that we called xpc_msgqueue_ref() in xpc_deliver_payload().
  *
  * Arguments:
  *
  *	partid - ID of partition to which the channel is connected.
  *	ch_number - channel # message received on.
  *	payload - pointer to the payload area allocated via
- *			xpc_initiate_allocate().
+ *			xpc_initiate_send() or xpc_initiate_send_notify().
  */
 void
 xpc_initiate_received(short partid, int ch_number, void *payload)
 {
 	struct xpc_partition *part = &xpc_partitions[partid];
 	struct xpc_channel *ch;
-	struct xpc_msg *msg = XPC_MSG_ADDRESS(payload);
-	s64 get, msg_number = msg->number;
 
-	DBUG_ON(partid <= 0 || partid >= XP_MAX_PARTITIONS);
+	DBUG_ON(partid < 0 || partid >= xp_max_npartitions);
 	DBUG_ON(ch_number < 0 || ch_number >= part->nchannels);
 
 	ch = &part->channels[ch_number];
+	xpc_received_payload(ch, payload);
 
-	dev_dbg(xpc_chan, "msg=0x%p, msg_number=%ld, partid=%d, channel=%d\n",
-		(void *)msg, msg_number, ch->partid, ch->number);
-
-	DBUG_ON((((u64)msg - (u64)ch->remote_msgqueue) / ch->msg_size) !=
-		msg_number % ch->remote_nentries);
-	DBUG_ON(msg->flags & XPC_M_DONE);
-
-	msg->flags |= XPC_M_DONE;
-
-	/*
-	 * The preceding store of msg->flags must occur before the following
-	 * load of ch->local_GP->get.
-	 */
-	mb();
-
-	/*
-	 * See if this message is next in line to be acknowledged as having
-	 * been delivered.
-	 */
-	get = ch->local_GP->get;
-	if (get == msg_number)
-		xpc_acknowledge_msgs(ch, get, msg->flags);
-
-	/* the call to xpc_msgqueue_ref() was done by xpc_deliver_msg()  */
+	/* the call to xpc_msgqueue_ref() was done by xpc_deliver_payload()  */
 	xpc_msgqueue_deref(ch);
 }
diff --git a/drivers/misc/sgi-xp/xpc_main.c b/drivers/misc/sgi-xp/xpc_main.c
index 579b01ff82d4..46325fc84811 100644
--- a/drivers/misc/sgi-xp/xpc_main.c
+++ b/drivers/misc/sgi-xp/xpc_main.c
@@ -25,37 +25,31 @@
  *
  *	Caveats:
  *
- *	  . We currently have no way to determine which nasid an IPI came
- *	    from. Thus, xpc_IPI_send() does a remote AMO write followed by
- *	    an IPI. The AMO indicates where data is to be pulled from, so
- *	    after the IPI arrives, the remote partition checks the AMO word.
- *	    The IPI can actually arrive before the AMO however, so other code
- *	    must periodically check for this case. Also, remote AMO operations
- *	    do not reliably time out. Thus we do a remote PIO read solely to
- *	    know whether the remote partition is down and whether we should
- *	    stop sending IPIs to it. This remote PIO read operation is set up
- *	    in a special nofault region so SAL knows to ignore (and cleanup)
- *	    any errors due to the remote AMO write, PIO read, and/or PIO
- *	    write operations.
+ *	  . Currently on sn2, we have no way to determine which nasid an IRQ
+ *	    came from. Thus, xpc_send_IRQ_sn2() does a remote amo write
+ *	    followed by an IPI. The amo indicates where data is to be pulled
+ *	    from, so after the IPI arrives, the remote partition checks the amo
+ *	    word. The IPI can actually arrive before the amo however, so other
+ *	    code must periodically check for this case. Also, remote amo
+ *	    operations do not reliably time out. Thus we do a remote PIO read
+ *	    solely to know whether the remote partition is down and whether we
+ *	    should stop sending IPIs to it. This remote PIO read operation is
+ *	    set up in a special nofault region so SAL knows to ignore (and
+ *	    cleanup) any errors due to the remote amo write, PIO read, and/or
+ *	    PIO write operations.
  *
  *	    If/when new hardware solves this IPI problem, we should abandon
  *	    the current approach.
  *
  */
 
-#include <linux/kernel.h>
 #include <linux/module.h>
-#include <linux/init.h>
-#include <linux/cache.h>
-#include <linux/interrupt.h>
+#include <linux/sysctl.h>
+#include <linux/device.h>
 #include <linux/delay.h>
 #include <linux/reboot.h>
-#include <linux/completion.h>
 #include <linux/kdebug.h>
 #include <linux/kthread.h>
-#include <linux/uaccess.h>
-#include <asm/sn/intr.h>
-#include <asm/sn/sn_sal.h>
 #include "xpc.h"
 
 /* define two XPC debug device structures to be used with dev_dbg() et al */
@@ -89,9 +83,9 @@ static int xpc_hb_check_interval = XPC_HB_CHECK_DEFAULT_INTERVAL;
 static int xpc_hb_check_min_interval = 10;
 static int xpc_hb_check_max_interval = 120;
 
-int xpc_disengage_request_timelimit = XPC_DISENGAGE_REQUEST_DEFAULT_TIMELIMIT;
-static int xpc_disengage_request_min_timelimit;	/* = 0 */
-static int xpc_disengage_request_max_timelimit = 120;
+int xpc_disengage_timelimit = XPC_DISENGAGE_DEFAULT_TIMELIMIT;
+static int xpc_disengage_min_timelimit;	/* = 0 */
+static int xpc_disengage_max_timelimit = 120;
 
 static ctl_table xpc_sys_xpc_hb_dir[] = {
 	{
@@ -124,14 +118,14 @@ static ctl_table xpc_sys_xpc_dir[] = {
 	 .child = xpc_sys_xpc_hb_dir},
 	{
 	 .ctl_name = CTL_UNNUMBERED,
-	 .procname = "disengage_request_timelimit",
-	 .data = &xpc_disengage_request_timelimit,
+	 .procname = "disengage_timelimit",
+	 .data = &xpc_disengage_timelimit,
 	 .maxlen = sizeof(int),
 	 .mode = 0644,
 	 .proc_handler = &proc_dointvec_minmax,
 	 .strategy = &sysctl_intvec,
-	 .extra1 = &xpc_disengage_request_min_timelimit,
-	 .extra2 = &xpc_disengage_request_max_timelimit},
+	 .extra1 = &xpc_disengage_min_timelimit,
+	 .extra2 = &xpc_disengage_max_timelimit},
 	{}
 };
 static ctl_table xpc_sys_dir[] = {
@@ -144,16 +138,19 @@ static ctl_table xpc_sys_dir[] = {
 };
 static struct ctl_table_header *xpc_sysctl;
 
-/* non-zero if any remote partition disengage request was timed out */
-int xpc_disengage_request_timedout;
+/* non-zero if any remote partition disengage was timed out */
+int xpc_disengage_timedout;
 
-/* #of IRQs received */
-static atomic_t xpc_act_IRQ_rcvd;
+/* #of activate IRQs received and not yet processed */
+int xpc_activate_IRQ_rcvd;
+DEFINE_SPINLOCK(xpc_activate_IRQ_rcvd_lock);
 
 /* IRQ handler notifies this wait queue on receipt of an IRQ */
-static DECLARE_WAIT_QUEUE_HEAD(xpc_act_IRQ_wq);
+DECLARE_WAIT_QUEUE_HEAD(xpc_activate_IRQ_wq);
 
 static unsigned long xpc_hb_check_timeout;
+static struct timer_list xpc_hb_timer;
+void *xpc_heartbeating_to_mask;
 
 /* notification that the xpc_hb_checker thread has exited */
 static DECLARE_COMPLETION(xpc_hb_checker_exited);
@@ -161,8 +158,6 @@ static DECLARE_COMPLETION(xpc_hb_checker_exited);
 /* notification that the xpc_discovery thread has exited */
 static DECLARE_COMPLETION(xpc_discovery_exited);
 
-static struct timer_list xpc_hb_timer;
-
 static void xpc_kthread_waitmsgs(struct xpc_partition *, struct xpc_channel *);
 
 static int xpc_system_reboot(struct notifier_block *, unsigned long, void *);
@@ -175,31 +170,76 @@ static struct notifier_block xpc_die_notifier = {
 	.notifier_call = xpc_system_die,
 };
 
+int (*xpc_setup_partitions_sn) (void);
+enum xp_retval (*xpc_get_partition_rsvd_page_pa) (void *buf, u64 *cookie,
+						  unsigned long *rp_pa,
+						  size_t *len);
+int (*xpc_setup_rsvd_page_sn) (struct xpc_rsvd_page *rp);
+void (*xpc_heartbeat_init) (void);
+void (*xpc_heartbeat_exit) (void);
+void (*xpc_increment_heartbeat) (void);
+void (*xpc_offline_heartbeat) (void);
+void (*xpc_online_heartbeat) (void);
+enum xp_retval (*xpc_get_remote_heartbeat) (struct xpc_partition *part);
+
+enum xp_retval (*xpc_make_first_contact) (struct xpc_partition *part);
+void (*xpc_notify_senders_of_disconnect) (struct xpc_channel *ch);
+u64 (*xpc_get_chctl_all_flags) (struct xpc_partition *part);
+enum xp_retval (*xpc_setup_msg_structures) (struct xpc_channel *ch);
+void (*xpc_teardown_msg_structures) (struct xpc_channel *ch);
+void (*xpc_process_msg_chctl_flags) (struct xpc_partition *part, int ch_number);
+int (*xpc_n_of_deliverable_payloads) (struct xpc_channel *ch);
+void *(*xpc_get_deliverable_payload) (struct xpc_channel *ch);
+
+void (*xpc_request_partition_activation) (struct xpc_rsvd_page *remote_rp,
+					  unsigned long remote_rp_pa,
+					  int nasid);
+void (*xpc_request_partition_reactivation) (struct xpc_partition *part);
+void (*xpc_request_partition_deactivation) (struct xpc_partition *part);
+void (*xpc_cancel_partition_deactivation_request) (struct xpc_partition *part);
+
+void (*xpc_process_activate_IRQ_rcvd) (void);
+enum xp_retval (*xpc_setup_ch_structures_sn) (struct xpc_partition *part);
+void (*xpc_teardown_ch_structures_sn) (struct xpc_partition *part);
+
+void (*xpc_indicate_partition_engaged) (struct xpc_partition *part);
+int (*xpc_partition_engaged) (short partid);
+int (*xpc_any_partition_engaged) (void);
+void (*xpc_indicate_partition_disengaged) (struct xpc_partition *part);
+void (*xpc_assume_partition_disengaged) (short partid);
+
+void (*xpc_send_chctl_closerequest) (struct xpc_channel *ch,
+				     unsigned long *irq_flags);
+void (*xpc_send_chctl_closereply) (struct xpc_channel *ch,
+				   unsigned long *irq_flags);
+void (*xpc_send_chctl_openrequest) (struct xpc_channel *ch,
+				    unsigned long *irq_flags);
+void (*xpc_send_chctl_openreply) (struct xpc_channel *ch,
+				  unsigned long *irq_flags);
+
+void (*xpc_save_remote_msgqueue_pa) (struct xpc_channel *ch,
+				     unsigned long msgqueue_pa);
+
+enum xp_retval (*xpc_send_payload) (struct xpc_channel *ch, u32 flags,
+				    void *payload, u16 payload_size,
+				    u8 notify_type, xpc_notify_func func,
+				    void *key);
+void (*xpc_received_payload) (struct xpc_channel *ch, void *payload);
+
 /*
- * Timer function to enforce the timelimit on the partition disengage request.
+ * Timer function to enforce the timelimit on the partition disengage.
  */
 static void
-xpc_timeout_partition_disengage_request(unsigned long data)
+xpc_timeout_partition_disengage(unsigned long data)
 {
 	struct xpc_partition *part = (struct xpc_partition *)data;
 
-	DBUG_ON(time_before(jiffies, part->disengage_request_timeout));
+	DBUG_ON(time_is_after_jiffies(part->disengage_timeout));
 
 	(void)xpc_partition_disengaged(part);
 
-	DBUG_ON(part->disengage_request_timeout != 0);
-	DBUG_ON(xpc_partition_engaged(1UL << XPC_PARTID(part)) != 0);
-}
-
-/*
- * Notify the heartbeat check thread that an IRQ has been received.
- */
-static irqreturn_t
-xpc_act_IRQ_handler(int irq, void *dev_id)
-{
-	atomic_inc(&xpc_act_IRQ_rcvd);
-	wake_up_interruptible(&xpc_act_IRQ_wq);
-	return IRQ_HANDLED;
+	DBUG_ON(part->disengage_timeout != 0);
+	DBUG_ON(xpc_partition_engaged(XPC_PARTID(part)));
 }
 
 /*
@@ -210,15 +250,63 @@ xpc_act_IRQ_handler(int irq, void *dev_id)
 static void
 xpc_hb_beater(unsigned long dummy)
 {
-	xpc_vars->heartbeat++;
+	xpc_increment_heartbeat();
 
-	if (time_after_eq(jiffies, xpc_hb_check_timeout))
-		wake_up_interruptible(&xpc_act_IRQ_wq);
+	if (time_is_before_eq_jiffies(xpc_hb_check_timeout))
+		wake_up_interruptible(&xpc_activate_IRQ_wq);
 
 	xpc_hb_timer.expires = jiffies + (xpc_hb_interval * HZ);
 	add_timer(&xpc_hb_timer);
 }
 
+static void
+xpc_start_hb_beater(void)
+{
+	xpc_heartbeat_init();
+	init_timer(&xpc_hb_timer);
+	xpc_hb_timer.function = xpc_hb_beater;
+	xpc_hb_beater(0);
+}
+
+static void
+xpc_stop_hb_beater(void)
+{
+	del_timer_sync(&xpc_hb_timer);
+	xpc_heartbeat_exit();
+}
+
+/*
+ * At periodic intervals, scan through all active partitions and ensure
+ * their heartbeat is still active.  If not, the partition is deactivated.
+ */
+static void
+xpc_check_remote_hb(void)
+{
+	struct xpc_partition *part;
+	short partid;
+	enum xp_retval ret;
+
+	for (partid = 0; partid < xp_max_npartitions; partid++) {
+
+		if (xpc_exiting)
+			break;
+
+		if (partid == xp_partition_id)
+			continue;
+
+		part = &xpc_partitions[partid];
+
+		if (part->act_state == XPC_P_AS_INACTIVE ||
+		    part->act_state == XPC_P_AS_DEACTIVATING) {
+			continue;
+		}
+
+		ret = xpc_get_remote_heartbeat(part);
+		if (ret != xpSuccess)
+			XPC_DEACTIVATE_PARTITION(part, ret);
+	}
+}
+
 /*
  * This thread is responsible for nearly all of the partition
  * activation/deactivation.
@@ -226,67 +314,57 @@ xpc_hb_beater(unsigned long dummy)
 static int
 xpc_hb_checker(void *ignore)
 {
-	int last_IRQ_count = 0;
-	int new_IRQ_count;
 	int force_IRQ = 0;
-	cpumask_of_cpu_ptr(cpumask, XPC_HB_CHECK_CPU);
 
 	/* this thread was marked active by xpc_hb_init() */
 
-	set_cpus_allowed_ptr(current, cpumask);
+	set_cpus_allowed_ptr(current, &cpumask_of_cpu(XPC_HB_CHECK_CPU));
 
 	/* set our heartbeating to other partitions into motion */
 	xpc_hb_check_timeout = jiffies + (xpc_hb_check_interval * HZ);
-	xpc_hb_beater(0);
+	xpc_start_hb_beater();
 
 	while (!xpc_exiting) {
 
 		dev_dbg(xpc_part, "woke up with %d ticks rem; %d IRQs have "
 			"been received\n",
 			(int)(xpc_hb_check_timeout - jiffies),
-			atomic_read(&xpc_act_IRQ_rcvd) - last_IRQ_count);
+			xpc_activate_IRQ_rcvd);
 
 		/* checking of remote heartbeats is skewed by IRQ handling */
-		if (time_after_eq(jiffies, xpc_hb_check_timeout)) {
+		if (time_is_before_eq_jiffies(xpc_hb_check_timeout)) {
+			xpc_hb_check_timeout = jiffies +
+			    (xpc_hb_check_interval * HZ);
+
 			dev_dbg(xpc_part, "checking remote heartbeats\n");
 			xpc_check_remote_hb();
 
 			/*
-			 * We need to periodically recheck to ensure no
-			 * IPI/AMO pairs have been missed.  That check
-			 * must always reset xpc_hb_check_timeout.
+			 * On sn2 we need to periodically recheck to ensure no
+			 * IRQ/amo pairs have been missed.
 			 */
-			force_IRQ = 1;
+			if (is_shub())
+				force_IRQ = 1;
 		}
 
 		/* check for outstanding IRQs */
-		new_IRQ_count = atomic_read(&xpc_act_IRQ_rcvd);
-		if (last_IRQ_count < new_IRQ_count || force_IRQ != 0) {
+		if (xpc_activate_IRQ_rcvd > 0 || force_IRQ != 0) {
 			force_IRQ = 0;
-
-			dev_dbg(xpc_part, "found an IRQ to process; will be "
-				"resetting xpc_hb_check_timeout\n");
-
-			last_IRQ_count += xpc_identify_act_IRQ_sender();
-			if (last_IRQ_count < new_IRQ_count) {
-				/* retry once to help avoid missing AMO */
-				(void)xpc_identify_act_IRQ_sender();
-			}
-			last_IRQ_count = new_IRQ_count;
-
-			xpc_hb_check_timeout = jiffies +
-			    (xpc_hb_check_interval * HZ);
+			dev_dbg(xpc_part, "processing activate IRQs "
+				"received\n");
+			xpc_process_activate_IRQ_rcvd();
 		}
 
 		/* wait for IRQ or timeout */
-		(void)wait_event_interruptible(xpc_act_IRQ_wq,
-					       (last_IRQ_count <
-						atomic_read(&xpc_act_IRQ_rcvd)
-						|| time_after_eq(jiffies,
-							xpc_hb_check_timeout) ||
+		(void)wait_event_interruptible(xpc_activate_IRQ_wq,
+					       (time_is_before_eq_jiffies(
+						xpc_hb_check_timeout) ||
+						xpc_activate_IRQ_rcvd > 0 ||
 						xpc_exiting));
 	}
 
+	xpc_stop_hb_beater();
+
 	dev_dbg(xpc_part, "heartbeat checker is exiting\n");
 
 	/* mark this thread as having exited */
@@ -312,37 +390,8 @@ xpc_initiate_discovery(void *ignore)
 }
 
 /*
- * Establish first contact with the remote partititon. This involves pulling
- * the XPC per partition variables from the remote partition and waiting for
- * the remote partition to pull ours.
- */
-static enum xp_retval
-xpc_make_first_contact(struct xpc_partition *part)
-{
-	enum xp_retval ret;
-
-	while ((ret = xpc_pull_remote_vars_part(part)) != xpSuccess) {
-		if (ret != xpRetry) {
-			XPC_DEACTIVATE_PARTITION(part, ret);
-			return ret;
-		}
-
-		dev_dbg(xpc_chan, "waiting to make first contact with "
-			"partition %d\n", XPC_PARTID(part));
-
-		/* wait a 1/4 of a second or so */
-		(void)msleep_interruptible(250);
-
-		if (part->act_state == XPC_P_DEACTIVATING)
-			return part->reason;
-	}
-
-	return xpc_mark_partition_active(part);
-}
-
-/*
  * The first kthread assigned to a newly activated partition is the one
- * created by XPC HB with which it calls xpc_partition_up(). XPC hangs on to
+ * created by XPC HB with which it calls xpc_activating(). XPC hangs on to
  * that kthread until the partition is brought down, at which time that kthread
  * returns back to XPC HB. (The return of that kthread will signify to XPC HB
  * that XPC has dismantled all communication infrastructure for the associated
@@ -355,11 +404,11 @@ xpc_make_first_contact(struct xpc_partition *part)
 static void
 xpc_channel_mgr(struct xpc_partition *part)
 {
-	while (part->act_state != XPC_P_DEACTIVATING ||
+	while (part->act_state != XPC_P_AS_DEACTIVATING ||
 	       atomic_read(&part->nchannels_active) > 0 ||
 	       !xpc_partition_disengaged(part)) {
 
-		xpc_process_channel_activity(part);
+		xpc_process_sent_chctl_flags(part);
 
 		/*
 		 * Wait until we've been requested to activate kthreads or
@@ -377,8 +426,8 @@ xpc_channel_mgr(struct xpc_partition *part)
 		atomic_dec(&part->channel_mgr_requests);
 		(void)wait_event_interruptible(part->channel_mgr_wq,
 				(atomic_read(&part->channel_mgr_requests) > 0 ||
-				 part->local_IPI_amo != 0 ||
-				 (part->act_state == XPC_P_DEACTIVATING &&
+				 part->chctl.all_flags != 0 ||
+				 (part->act_state == XPC_P_AS_DEACTIVATING &&
 				 atomic_read(&part->nchannels_active) == 0 &&
 				 xpc_partition_disengaged(part))));
 		atomic_set(&part->channel_mgr_requests, 1);
@@ -386,47 +435,163 @@ xpc_channel_mgr(struct xpc_partition *part)
 }
 
 /*
- * When XPC HB determines that a partition has come up, it will create a new
- * kthread and that kthread will call this function to attempt to set up the
- * basic infrastructure used for Cross Partition Communication with the newly
- * upped partition.
- *
- * The kthread that was created by XPC HB and which setup the XPC
- * infrastructure will remain assigned to the partition until the partition
- * goes down. At which time the kthread will teardown the XPC infrastructure
- * and then exit.
- *
- * XPC HB will put the remote partition's XPC per partition specific variables
- * physical address into xpc_partitions[partid].remote_vars_part_pa prior to
- * calling xpc_partition_up().
+ * Guarantee that the kzalloc'd memory is cacheline aligned.
  */
-static void
-xpc_partition_up(struct xpc_partition *part)
+void *
+xpc_kzalloc_cacheline_aligned(size_t size, gfp_t flags, void **base)
+{
+	/* see if kzalloc will give us cachline aligned memory by default */
+	*base = kzalloc(size, flags);
+	if (*base == NULL)
+		return NULL;
+
+	if ((u64)*base == L1_CACHE_ALIGN((u64)*base))
+		return *base;
+
+	kfree(*base);
+
+	/* nope, we'll have to do it ourselves */
+	*base = kzalloc(size + L1_CACHE_BYTES, flags);
+	if (*base == NULL)
+		return NULL;
+
+	return (void *)L1_CACHE_ALIGN((u64)*base);
+}
+
+/*
+ * Setup the channel structures necessary to support XPartition Communication
+ * between the specified remote partition and the local one.
+ */
+static enum xp_retval
+xpc_setup_ch_structures(struct xpc_partition *part)
 {
+	enum xp_retval ret;
+	int ch_number;
+	struct xpc_channel *ch;
+	short partid = XPC_PARTID(part);
+
+	/*
+	 * Allocate all of the channel structures as a contiguous chunk of
+	 * memory.
+	 */
 	DBUG_ON(part->channels != NULL);
+	part->channels = kzalloc(sizeof(struct xpc_channel) * XPC_MAX_NCHANNELS,
+				 GFP_KERNEL);
+	if (part->channels == NULL) {
+		dev_err(xpc_chan, "can't get memory for channels\n");
+		return xpNoMemory;
+	}
 
-	dev_dbg(xpc_chan, "activating partition %d\n", XPC_PARTID(part));
+	/* allocate the remote open and close args */
 
-	if (xpc_setup_infrastructure(part) != xpSuccess)
-		return;
+	part->remote_openclose_args =
+	    xpc_kzalloc_cacheline_aligned(XPC_OPENCLOSE_ARGS_SIZE,
+					  GFP_KERNEL, &part->
+					  remote_openclose_args_base);
+	if (part->remote_openclose_args == NULL) {
+		dev_err(xpc_chan, "can't get memory for remote connect args\n");
+		ret = xpNoMemory;
+		goto out_1;
+	}
+
+	part->chctl.all_flags = 0;
+	spin_lock_init(&part->chctl_lock);
+
+	atomic_set(&part->channel_mgr_requests, 1);
+	init_waitqueue_head(&part->channel_mgr_wq);
+
+	part->nchannels = XPC_MAX_NCHANNELS;
+
+	atomic_set(&part->nchannels_active, 0);
+	atomic_set(&part->nchannels_engaged, 0);
+
+	for (ch_number = 0; ch_number < part->nchannels; ch_number++) {
+		ch = &part->channels[ch_number];
+
+		ch->partid = partid;
+		ch->number = ch_number;
+		ch->flags = XPC_C_DISCONNECTED;
+
+		atomic_set(&ch->kthreads_assigned, 0);
+		atomic_set(&ch->kthreads_idle, 0);
+		atomic_set(&ch->kthreads_active, 0);
+
+		atomic_set(&ch->references, 0);
+		atomic_set(&ch->n_to_notify, 0);
+
+		spin_lock_init(&ch->lock);
+		init_completion(&ch->wdisconnect_wait);
+
+		atomic_set(&ch->n_on_msg_allocate_wq, 0);
+		init_waitqueue_head(&ch->msg_allocate_wq);
+		init_waitqueue_head(&ch->idle_wq);
+	}
+
+	ret = xpc_setup_ch_structures_sn(part);
+	if (ret != xpSuccess)
+		goto out_2;
+
+	/*
+	 * With the setting of the partition setup_state to XPC_P_SS_SETUP,
+	 * we're declaring that this partition is ready to go.
+	 */
+	part->setup_state = XPC_P_SS_SETUP;
+
+	return xpSuccess;
+
+	/* setup of ch structures failed */
+out_2:
+	kfree(part->remote_openclose_args_base);
+	part->remote_openclose_args = NULL;
+out_1:
+	kfree(part->channels);
+	part->channels = NULL;
+	return ret;
+}
+
+/*
+ * Teardown the channel structures necessary to support XPartition Communication
+ * between the specified remote partition and the local one.
+ */
+static void
+xpc_teardown_ch_structures(struct xpc_partition *part)
+{
+	DBUG_ON(atomic_read(&part->nchannels_engaged) != 0);
+	DBUG_ON(atomic_read(&part->nchannels_active) != 0);
 
 	/*
-	 * The kthread that XPC HB called us with will become the
-	 * channel manager for this partition. It will not return
-	 * back to XPC HB until the partition's XPC infrastructure
-	 * has been dismantled.
+	 * Make this partition inaccessible to local processes by marking it
+	 * as no longer setup. Then wait before proceeding with the teardown
+	 * until all existing references cease.
 	 */
+	DBUG_ON(part->setup_state != XPC_P_SS_SETUP);
+	part->setup_state = XPC_P_SS_WTEARDOWN;
 
-	(void)xpc_part_ref(part);	/* this will always succeed */
+	wait_event(part->teardown_wq, (atomic_read(&part->references) == 0));
 
-	if (xpc_make_first_contact(part) == xpSuccess)
-		xpc_channel_mgr(part);
+	/* now we can begin tearing down the infrastructure */
 
-	xpc_part_deref(part);
+	xpc_teardown_ch_structures_sn(part);
 
-	xpc_teardown_infrastructure(part);
+	kfree(part->remote_openclose_args_base);
+	part->remote_openclose_args = NULL;
+	kfree(part->channels);
+	part->channels = NULL;
+
+	part->setup_state = XPC_P_SS_TORNDOWN;
 }
 
+/*
+ * When XPC HB determines that a partition has come up, it will create a new
+ * kthread and that kthread will call this function to attempt to set up the
+ * basic infrastructure used for Cross Partition Communication with the newly
+ * upped partition.
+ *
+ * The kthread that was created by XPC HB and which setup the XPC
+ * infrastructure will remain assigned to the partition becoming the channel
+ * manager for that partition until the partition is deactivating, at which
+ * time the kthread will teardown the XPC infrastructure and then exit.
+ */
 static int
 xpc_activating(void *__partid)
 {
@@ -434,64 +599,47 @@ xpc_activating(void *__partid)
 	struct xpc_partition *part = &xpc_partitions[partid];
 	unsigned long irq_flags;
 
-	DBUG_ON(partid <= 0 || partid >= XP_MAX_PARTITIONS);
+	DBUG_ON(partid < 0 || partid >= xp_max_npartitions);
 
 	spin_lock_irqsave(&part->act_lock, irq_flags);
 
-	if (part->act_state == XPC_P_DEACTIVATING) {
-		part->act_state = XPC_P_INACTIVE;
+	if (part->act_state == XPC_P_AS_DEACTIVATING) {
+		part->act_state = XPC_P_AS_INACTIVE;
 		spin_unlock_irqrestore(&part->act_lock, irq_flags);
 		part->remote_rp_pa = 0;
 		return 0;
 	}
 
 	/* indicate the thread is activating */
-	DBUG_ON(part->act_state != XPC_P_ACTIVATION_REQ);
-	part->act_state = XPC_P_ACTIVATING;
+	DBUG_ON(part->act_state != XPC_P_AS_ACTIVATION_REQ);
+	part->act_state = XPC_P_AS_ACTIVATING;
 
 	XPC_SET_REASON(part, 0, 0);
 	spin_unlock_irqrestore(&part->act_lock, irq_flags);
 
-	dev_dbg(xpc_part, "bringing partition %d up\n", partid);
+	dev_dbg(xpc_part, "activating partition %d\n", partid);
 
-	/*
-	 * Register the remote partition's AMOs with SAL so it can handle
-	 * and cleanup errors within that address range should the remote
-	 * partition go down. We don't unregister this range because it is
-	 * difficult to tell when outstanding writes to the remote partition
-	 * are finished and thus when it is safe to unregister. This should
-	 * not result in wasted space in the SAL xp_addr_region table because
-	 * we should get the same page for remote_amos_page_pa after module
-	 * reloads and system reboots.
-	 */
-	if (sn_register_xp_addr_region(part->remote_amos_page_pa,
-				       PAGE_SIZE, 1) < 0) {
-		dev_warn(xpc_part, "xpc_partition_up(%d) failed to register "
-			 "xp_addr region\n", partid);
+	xpc_allow_hb(partid);
 
-		spin_lock_irqsave(&part->act_lock, irq_flags);
-		part->act_state = XPC_P_INACTIVE;
-		XPC_SET_REASON(part, xpPhysAddrRegFailed, __LINE__);
-		spin_unlock_irqrestore(&part->act_lock, irq_flags);
-		part->remote_rp_pa = 0;
-		return 0;
-	}
+	if (xpc_setup_ch_structures(part) == xpSuccess) {
+		(void)xpc_part_ref(part);	/* this will always succeed */
 
-	xpc_allow_hb(partid, xpc_vars);
-	xpc_IPI_send_activated(part);
+		if (xpc_make_first_contact(part) == xpSuccess) {
+			xpc_mark_partition_active(part);
+			xpc_channel_mgr(part);
+			/* won't return until partition is deactivating */
+		}
 
-	/*
-	 * xpc_partition_up() holds this thread and marks this partition as
-	 * XPC_P_ACTIVE by calling xpc_hb_mark_active().
-	 */
-	(void)xpc_partition_up(part);
+		xpc_part_deref(part);
+		xpc_teardown_ch_structures(part);
+	}
 
-	xpc_disallow_hb(partid, xpc_vars);
+	xpc_disallow_hb(partid);
 	xpc_mark_partition_inactive(part);
 
 	if (part->reason == xpReactivating) {
 		/* interrupting ourselves results in activating partition */
-		xpc_IPI_send_reactivate(part);
+		xpc_request_partition_reactivation(part);
 	}
 
 	return 0;
@@ -506,9 +654,9 @@ xpc_activate_partition(struct xpc_partition *part)
 
 	spin_lock_irqsave(&part->act_lock, irq_flags);
 
-	DBUG_ON(part->act_state != XPC_P_INACTIVE);
+	DBUG_ON(part->act_state != XPC_P_AS_INACTIVE);
 
-	part->act_state = XPC_P_ACTIVATION_REQ;
+	part->act_state = XPC_P_AS_ACTIVATION_REQ;
 	XPC_SET_REASON(part, xpCloneKThread, __LINE__);
 
 	spin_unlock_irqrestore(&part->act_lock, irq_flags);
@@ -517,62 +665,12 @@ xpc_activate_partition(struct xpc_partition *part)
 			      partid);
 	if (IS_ERR(kthread)) {
 		spin_lock_irqsave(&part->act_lock, irq_flags);
-		part->act_state = XPC_P_INACTIVE;
+		part->act_state = XPC_P_AS_INACTIVE;
 		XPC_SET_REASON(part, xpCloneKThreadFailed, __LINE__);
 		spin_unlock_irqrestore(&part->act_lock, irq_flags);
 	}
 }
 
-/*
- * Handle the receipt of a SGI_XPC_NOTIFY IRQ by seeing whether the specified
- * partition actually sent it. Since SGI_XPC_NOTIFY IRQs may be shared by more
- * than one partition, we use an AMO_t structure per partition to indicate
- * whether a partition has sent an IPI or not.  If it has, then wake up the
- * associated kthread to handle it.
- *
- * All SGI_XPC_NOTIFY IRQs received by XPC are the result of IPIs sent by XPC
- * running on other partitions.
- *
- * Noteworthy Arguments:
- *
- *	irq - Interrupt ReQuest number. NOT USED.
- *
- *	dev_id - partid of IPI's potential sender.
- */
-irqreturn_t
-xpc_notify_IRQ_handler(int irq, void *dev_id)
-{
-	short partid = (short)(u64)dev_id;
-	struct xpc_partition *part = &xpc_partitions[partid];
-
-	DBUG_ON(partid <= 0 || partid >= XP_MAX_PARTITIONS);
-
-	if (xpc_part_ref(part)) {
-		xpc_check_for_channel_activity(part);
-
-		xpc_part_deref(part);
-	}
-	return IRQ_HANDLED;
-}
-
-/*
- * Check to see if xpc_notify_IRQ_handler() dropped any IPIs on the floor
- * because the write to their associated IPI amo completed after the IRQ/IPI
- * was received.
- */
-void
-xpc_dropped_IPI_check(struct xpc_partition *part)
-{
-	if (xpc_part_ref(part)) {
-		xpc_check_for_channel_activity(part);
-
-		part->dropped_IPI_timer.expires = jiffies +
-		    XPC_P_DROPPED_IPI_WAIT;
-		add_timer(&part->dropped_IPI_timer);
-		xpc_part_deref(part);
-	}
-}
-
 void
 xpc_activate_kthreads(struct xpc_channel *ch, int needed)
 {
@@ -617,9 +715,9 @@ xpc_kthread_waitmsgs(struct xpc_partition *part, struct xpc_channel *ch)
 	do {
 		/* deliver messages to their intended recipients */
 
-		while (ch->w_local_GP.get < ch->w_remote_GP.put &&
+		while (xpc_n_of_deliverable_payloads(ch) > 0 &&
 		       !(ch->flags & XPC_C_DISCONNECTING)) {
-			xpc_deliver_msg(ch);
+			xpc_deliver_payload(ch);
 		}
 
 		if (atomic_inc_return(&ch->kthreads_idle) >
@@ -633,7 +731,7 @@ xpc_kthread_waitmsgs(struct xpc_partition *part, struct xpc_channel *ch)
 			"wait_event_interruptible_exclusive()\n");
 
 		(void)wait_event_interruptible_exclusive(ch->idle_wq,
-				(ch->w_local_GP.get < ch->w_remote_GP.put ||
+				(xpc_n_of_deliverable_payloads(ch) > 0 ||
 				 (ch->flags & XPC_C_DISCONNECTING)));
 
 		atomic_dec(&ch->kthreads_idle);
@@ -678,7 +776,7 @@ xpc_kthread_start(void *args)
 			 * additional kthreads to help deliver them. We only
 			 * need one less than total #of messages to deliver.
 			 */
-			n_needed = ch->w_remote_GP.put - ch->w_local_GP.get - 1;
+			n_needed = xpc_n_of_deliverable_payloads(ch) - 1;
 			if (n_needed > 0 && !(ch->flags & XPC_C_DISCONNECTING))
 				xpc_activate_kthreads(ch, n_needed);
 
@@ -704,11 +802,9 @@ xpc_kthread_start(void *args)
 	}
 	spin_unlock_irqrestore(&ch->lock, irq_flags);
 
-	if (atomic_dec_return(&ch->kthreads_assigned) == 0) {
-		if (atomic_dec_return(&part->nchannels_engaged) == 0) {
-			xpc_mark_partition_disengaged(part);
-			xpc_IPI_send_disengage(part);
-		}
+	if (atomic_dec_return(&ch->kthreads_assigned) == 0 &&
+	    atomic_dec_return(&part->nchannels_engaged) == 0) {
+		xpc_indicate_partition_disengaged(part);
 	}
 
 	xpc_msgqueue_deref(ch);
@@ -759,9 +855,9 @@ xpc_create_kthreads(struct xpc_channel *ch, int needed,
 		} else if (ch->flags & XPC_C_DISCONNECTING) {
 			break;
 
-		} else if (atomic_inc_return(&ch->kthreads_assigned) == 1) {
-			if (atomic_inc_return(&part->nchannels_engaged) == 1)
-				xpc_mark_partition_engaged(part);
+		} else if (atomic_inc_return(&ch->kthreads_assigned) == 1 &&
+			   atomic_inc_return(&part->nchannels_engaged) == 1) {
+				xpc_indicate_partition_engaged(part);
 		}
 		(void)xpc_part_ref(part);
 		xpc_msgqueue_ref(ch);
@@ -783,8 +879,7 @@ xpc_create_kthreads(struct xpc_channel *ch, int needed,
 
 			if (atomic_dec_return(&ch->kthreads_assigned) == 0 &&
 			    atomic_dec_return(&part->nchannels_engaged) == 0) {
-				xpc_mark_partition_disengaged(part);
-				xpc_IPI_send_disengage(part);
+				xpc_indicate_partition_disengaged(part);
 			}
 			xpc_msgqueue_deref(ch);
 			xpc_part_deref(part);
@@ -816,7 +911,7 @@ xpc_disconnect_wait(int ch_number)
 	int wakeup_channel_mgr;
 
 	/* now wait for all callouts to the caller's function to cease */
-	for (partid = 1; partid < XP_MAX_PARTITIONS; partid++) {
+	for (partid = 0; partid < xp_max_npartitions; partid++) {
 		part = &xpc_partitions[partid];
 
 		if (!xpc_part_ref(part))
@@ -835,16 +930,15 @@ xpc_disconnect_wait(int ch_number)
 		DBUG_ON(!(ch->flags & XPC_C_DISCONNECTED));
 		wakeup_channel_mgr = 0;
 
-		if (ch->delayed_IPI_flags) {
-			if (part->act_state != XPC_P_DEACTIVATING) {
-				spin_lock(&part->IPI_lock);
-				XPC_SET_IPI_FLAGS(part->local_IPI_amo,
-						  ch->number,
-						  ch->delayed_IPI_flags);
-				spin_unlock(&part->IPI_lock);
+		if (ch->delayed_chctl_flags) {
+			if (part->act_state != XPC_P_AS_DEACTIVATING) {
+				spin_lock(&part->chctl_lock);
+				part->chctl.flags[ch->number] |=
+				    ch->delayed_chctl_flags;
+				spin_unlock(&part->chctl_lock);
 				wakeup_channel_mgr = 1;
 			}
-			ch->delayed_IPI_flags = 0;
+			ch->delayed_chctl_flags = 0;
 		}
 
 		ch->flags &= ~XPC_C_WDISCONNECT;
@@ -857,13 +951,63 @@ xpc_disconnect_wait(int ch_number)
 	}
 }
 
+static int
+xpc_setup_partitions(void)
+{
+	short partid;
+	struct xpc_partition *part;
+
+	xpc_partitions = kzalloc(sizeof(struct xpc_partition) *
+				 xp_max_npartitions, GFP_KERNEL);
+	if (xpc_partitions == NULL) {
+		dev_err(xpc_part, "can't get memory for partition structure\n");
+		return -ENOMEM;
+	}
+
+	/*
+	 * The first few fields of each entry of xpc_partitions[] need to
+	 * be initialized now so that calls to xpc_connect() and
+	 * xpc_disconnect() can be made prior to the activation of any remote
+	 * partition. NOTE THAT NONE OF THE OTHER FIELDS BELONGING TO THESE
+	 * ENTRIES ARE MEANINGFUL UNTIL AFTER AN ENTRY'S CORRESPONDING
+	 * PARTITION HAS BEEN ACTIVATED.
+	 */
+	for (partid = 0; partid < xp_max_npartitions; partid++) {
+		part = &xpc_partitions[partid];
+
+		DBUG_ON((u64)part != L1_CACHE_ALIGN((u64)part));
+
+		part->activate_IRQ_rcvd = 0;
+		spin_lock_init(&part->act_lock);
+		part->act_state = XPC_P_AS_INACTIVE;
+		XPC_SET_REASON(part, 0, 0);
+
+		init_timer(&part->disengage_timer);
+		part->disengage_timer.function =
+		    xpc_timeout_partition_disengage;
+		part->disengage_timer.data = (unsigned long)part;
+
+		part->setup_state = XPC_P_SS_UNSET;
+		init_waitqueue_head(&part->teardown_wq);
+		atomic_set(&part->references, 0);
+	}
+
+	return xpc_setup_partitions_sn();
+}
+
+static void
+xpc_teardown_partitions(void)
+{
+	kfree(xpc_partitions);
+}
+
 static void
 xpc_do_exit(enum xp_retval reason)
 {
 	short partid;
 	int active_part_count, printed_waiting_msg = 0;
 	struct xpc_partition *part;
-	unsigned long printmsg_time, disengage_request_timeout = 0;
+	unsigned long printmsg_time, disengage_timeout = 0;
 
 	/* a 'rmmod XPC' and a 'reboot' cannot both end up here together */
 	DBUG_ON(xpc_exiting == 1);
@@ -874,10 +1018,7 @@ xpc_do_exit(enum xp_retval reason)
 	 * the heartbeat checker thread in case it's sleeping.
 	 */
 	xpc_exiting = 1;
-	wake_up_interruptible(&xpc_act_IRQ_wq);
-
-	/* ignore all incoming interrupts */
-	free_irq(SGI_XPC_ACTIVATE, NULL);
+	wake_up_interruptible(&xpc_activate_IRQ_wq);
 
 	/* wait for the discovery thread to exit */
 	wait_for_completion(&xpc_discovery_exited);
@@ -890,17 +1031,17 @@ xpc_do_exit(enum xp_retval reason)
 
 	/* wait for all partitions to become inactive */
 
-	printmsg_time = jiffies + (XPC_DISENGAGE_PRINTMSG_INTERVAL * HZ);
-	xpc_disengage_request_timedout = 0;
+	printmsg_time = jiffies + (XPC_DEACTIVATE_PRINTMSG_INTERVAL * HZ);
+	xpc_disengage_timedout = 0;
 
 	do {
 		active_part_count = 0;
 
-		for (partid = 1; partid < XP_MAX_PARTITIONS; partid++) {
+		for (partid = 0; partid < xp_max_npartitions; partid++) {
 			part = &xpc_partitions[partid];
 
 			if (xpc_partition_disengaged(part) &&
-			    part->act_state == XPC_P_INACTIVE) {
+			    part->act_state == XPC_P_AS_INACTIVE) {
 				continue;
 			}
 
@@ -908,36 +1049,32 @@ xpc_do_exit(enum xp_retval reason)
 
 			XPC_DEACTIVATE_PARTITION(part, reason);
 
-			if (part->disengage_request_timeout >
-			    disengage_request_timeout) {
-				disengage_request_timeout =
-				    part->disengage_request_timeout;
-			}
+			if (part->disengage_timeout > disengage_timeout)
+				disengage_timeout = part->disengage_timeout;
 		}
 
-		if (xpc_partition_engaged(-1UL)) {
-			if (time_after(jiffies, printmsg_time)) {
+		if (xpc_any_partition_engaged()) {
+			if (time_is_before_jiffies(printmsg_time)) {
 				dev_info(xpc_part, "waiting for remote "
-					 "partitions to disengage, timeout in "
-					 "%ld seconds\n",
-					 (disengage_request_timeout - jiffies)
-					 / HZ);
+					 "partitions to deactivate, timeout in "
+					 "%ld seconds\n", (disengage_timeout -
+					 jiffies) / HZ);
 				printmsg_time = jiffies +
-				    (XPC_DISENGAGE_PRINTMSG_INTERVAL * HZ);
+				    (XPC_DEACTIVATE_PRINTMSG_INTERVAL * HZ);
 				printed_waiting_msg = 1;
 			}
 
 		} else if (active_part_count > 0) {
 			if (printed_waiting_msg) {
 				dev_info(xpc_part, "waiting for local partition"
-					 " to disengage\n");
+					 " to deactivate\n");
 				printed_waiting_msg = 0;
 			}
 
 		} else {
-			if (!xpc_disengage_request_timedout) {
+			if (!xpc_disengage_timedout) {
 				dev_info(xpc_part, "all partitions have "
-					 "disengaged\n");
+					 "deactivated\n");
 			}
 			break;
 		}
@@ -947,33 +1084,28 @@ xpc_do_exit(enum xp_retval reason)
 
 	} while (1);
 
-	DBUG_ON(xpc_partition_engaged(-1UL));
+	DBUG_ON(xpc_any_partition_engaged());
+	DBUG_ON(xpc_any_hbs_allowed() != 0);
 
-	/* indicate to others that our reserved page is uninitialized */
-	xpc_rsvd_page->vars_pa = 0;
-
-	/* now it's time to eliminate our heartbeat */
-	del_timer_sync(&xpc_hb_timer);
-	DBUG_ON(xpc_vars->heartbeating_to_mask != 0);
+	xpc_teardown_rsvd_page();
 
 	if (reason == xpUnloading) {
-		/* take ourselves off of the reboot_notifier_list */
-		(void)unregister_reboot_notifier(&xpc_reboot_notifier);
-
-		/* take ourselves off of the die_notifier list */
 		(void)unregister_die_notifier(&xpc_die_notifier);
+		(void)unregister_reboot_notifier(&xpc_reboot_notifier);
 	}
 
-	/* close down protections for IPI operations */
-	xpc_restrict_IPI_ops();
-
 	/* clear the interface to XPC's functions */
 	xpc_clear_interface();
 
 	if (xpc_sysctl)
 		unregister_sysctl_table(xpc_sysctl);
 
-	kfree(xpc_remote_copy_buffer_base);
+	xpc_teardown_partitions();
+
+	if (is_shub())
+		xpc_exit_sn2();
+	else
+		xpc_exit_uv();
 }
 
 /*
@@ -1003,60 +1135,57 @@ xpc_system_reboot(struct notifier_block *nb, unsigned long event, void *unused)
 }
 
 /*
- * Notify other partitions to disengage from all references to our memory.
+ * Notify other partitions to deactivate from us by first disengaging from all
+ * references to our memory.
  */
 static void
-xpc_die_disengage(void)
+xpc_die_deactivate(void)
 {
 	struct xpc_partition *part;
 	short partid;
-	unsigned long engaged;
-	long time, printmsg_time, disengage_request_timeout;
+	int any_engaged;
+	long keep_waiting;
+	long wait_to_print;
 
 	/* keep xpc_hb_checker thread from doing anything (just in case) */
 	xpc_exiting = 1;
 
-	xpc_vars->heartbeating_to_mask = 0;	/* indicate we're deactivated */
+	xpc_disallow_all_hbs();	/*indicate we're deactivated */
 
-	for (partid = 1; partid < XP_MAX_PARTITIONS; partid++) {
+	for (partid = 0; partid < xp_max_npartitions; partid++) {
 		part = &xpc_partitions[partid];
 
-		if (!XPC_SUPPORTS_DISENGAGE_REQUEST(part->
-		    remote_vars_version)) {
-
-			/* just in case it was left set by an earlier XPC */
-			xpc_clear_partition_engaged(1UL << partid);
-			continue;
-		}
-
-		if (xpc_partition_engaged(1UL << partid) ||
-		    part->act_state != XPC_P_INACTIVE) {
-			xpc_request_partition_disengage(part);
-			xpc_mark_partition_disengaged(part);
-			xpc_IPI_send_disengage(part);
+		if (xpc_partition_engaged(partid) ||
+		    part->act_state != XPC_P_AS_INACTIVE) {
+			xpc_request_partition_deactivation(part);
+			xpc_indicate_partition_disengaged(part);
 		}
 	}
 
-	time = rtc_time();
-	printmsg_time = time +
-	    (XPC_DISENGAGE_PRINTMSG_INTERVAL * sn_rtc_cycles_per_second);
-	disengage_request_timeout = time +
-	    (xpc_disengage_request_timelimit * sn_rtc_cycles_per_second);
-
-	/* wait for all other partitions to disengage from us */
+	/*
+	 * Though we requested that all other partitions deactivate from us,
+	 * we only wait until they've all disengaged or we've reached the
+	 * defined timelimit.
+	 *
+	 * Given that one iteration through the following while-loop takes
+	 * approximately 200 microseconds, calculate the #of loops to take
+	 * before bailing and the #of loops before printing a waiting message.
+	 */
+	keep_waiting = xpc_disengage_timelimit * 1000 * 5;
+	wait_to_print = XPC_DEACTIVATE_PRINTMSG_INTERVAL * 1000 * 5;
 
 	while (1) {
-		engaged = xpc_partition_engaged(-1UL);
-		if (!engaged) {
-			dev_info(xpc_part, "all partitions have disengaged\n");
+		any_engaged = xpc_any_partition_engaged();
+		if (!any_engaged) {
+			dev_info(xpc_part, "all partitions have deactivated\n");
 			break;
 		}
 
-		time = rtc_time();
-		if (time >= disengage_request_timeout) {
-			for (partid = 1; partid < XP_MAX_PARTITIONS; partid++) {
-				if (engaged & (1UL << partid)) {
-					dev_info(xpc_part, "disengage from "
+		if (!keep_waiting--) {
+			for (partid = 0; partid < xp_max_npartitions;
+			     partid++) {
+				if (xpc_partition_engaged(partid)) {
+					dev_info(xpc_part, "deactivate from "
 						 "remote partition %d timed "
 						 "out\n", partid);
 				}
@@ -1064,15 +1193,15 @@ xpc_die_disengage(void)
 			break;
 		}
 
-		if (time >= printmsg_time) {
+		if (!wait_to_print--) {
 			dev_info(xpc_part, "waiting for remote partitions to "
-				 "disengage, timeout in %ld seconds\n",
-				 (disengage_request_timeout - time) /
-				 sn_rtc_cycles_per_second);
-			printmsg_time = time +
-			    (XPC_DISENGAGE_PRINTMSG_INTERVAL *
-			     sn_rtc_cycles_per_second);
+				 "deactivate, timeout in %ld seconds\n",
+				 keep_waiting / (1000 * 5));
+			wait_to_print = XPC_DEACTIVATE_PRINTMSG_INTERVAL *
+			    1000 * 5;
 		}
+
+		udelay(200);
 	}
 }
 
@@ -1087,10 +1216,11 @@ xpc_die_disengage(void)
 static int
 xpc_system_die(struct notifier_block *nb, unsigned long event, void *unused)
 {
+#ifdef CONFIG_IA64		/* !!! temporary kludge */
 	switch (event) {
 	case DIE_MACHINE_RESTART:
 	case DIE_MACHINE_HALT:
-		xpc_die_disengage();
+		xpc_die_deactivate();
 		break;
 
 	case DIE_KDEBUG_ENTER:
@@ -1101,8 +1231,7 @@ xpc_system_die(struct notifier_block *nb, unsigned long event, void *unused)
 		/* fall through */
 	case DIE_MCA_MONARCH_ENTER:
 	case DIE_INIT_MONARCH_ENTER:
-		xpc_vars->heartbeat++;
-		xpc_vars->heartbeat_offline = 1;
+		xpc_offline_heartbeat();
 		break;
 
 	case DIE_KDEBUG_LEAVE:
@@ -1113,10 +1242,12 @@ xpc_system_die(struct notifier_block *nb, unsigned long event, void *unused)
 		/* fall through */
 	case DIE_MCA_MONARCH_LEAVE:
 	case DIE_INIT_MONARCH_LEAVE:
-		xpc_vars->heartbeat++;
-		xpc_vars->heartbeat_offline = 0;
+		xpc_online_heartbeat();
 		break;
 	}
+#else
+	xpc_die_deactivate();
+#endif
 
 	return NOTIFY_DONE;
 }
@@ -1125,105 +1256,52 @@ int __init
 xpc_init(void)
 {
 	int ret;
-	short partid;
-	struct xpc_partition *part;
 	struct task_struct *kthread;
-	size_t buf_size;
-
-	if (!ia64_platform_is("sn2"))
-		return -ENODEV;
-
-	buf_size = max(XPC_RP_VARS_SIZE,
-		       XPC_RP_HEADER_SIZE + XP_NASID_MASK_BYTES);
-	xpc_remote_copy_buffer = xpc_kmalloc_cacheline_aligned(buf_size,
-							       GFP_KERNEL,
-						  &xpc_remote_copy_buffer_base);
-	if (xpc_remote_copy_buffer == NULL)
-		return -ENOMEM;
 
 	snprintf(xpc_part->bus_id, BUS_ID_SIZE, "part");
 	snprintf(xpc_chan->bus_id, BUS_ID_SIZE, "chan");
 
-	xpc_sysctl = register_sysctl_table(xpc_sys_dir);
-
-	/*
-	 * The first few fields of each entry of xpc_partitions[] need to
-	 * be initialized now so that calls to xpc_connect() and
-	 * xpc_disconnect() can be made prior to the activation of any remote
-	 * partition. NOTE THAT NONE OF THE OTHER FIELDS BELONGING TO THESE
-	 * ENTRIES ARE MEANINGFUL UNTIL AFTER AN ENTRY'S CORRESPONDING
-	 * PARTITION HAS BEEN ACTIVATED.
-	 */
-	for (partid = 1; partid < XP_MAX_PARTITIONS; partid++) {
-		part = &xpc_partitions[partid];
-
-		DBUG_ON((u64)part != L1_CACHE_ALIGN((u64)part));
-
-		part->act_IRQ_rcvd = 0;
-		spin_lock_init(&part->act_lock);
-		part->act_state = XPC_P_INACTIVE;
-		XPC_SET_REASON(part, 0, 0);
+	if (is_shub()) {
+		/*
+		 * The ia64-sn2 architecture supports at most 64 partitions.
+		 * And the inability to unregister remote amos restricts us
+		 * further to only support exactly 64 partitions on this
+		 * architecture, no less.
+		 */
+		if (xp_max_npartitions != 64) {
+			dev_err(xpc_part, "max #of partitions not set to 64\n");
+			ret = -EINVAL;
+		} else {
+			ret = xpc_init_sn2();
+		}
 
-		init_timer(&part->disengage_request_timer);
-		part->disengage_request_timer.function =
-		    xpc_timeout_partition_disengage_request;
-		part->disengage_request_timer.data = (unsigned long)part;
+	} else if (is_uv()) {
+		ret = xpc_init_uv();
 
-		part->setup_state = XPC_P_UNSET;
-		init_waitqueue_head(&part->teardown_wq);
-		atomic_set(&part->references, 0);
+	} else {
+		ret = -ENODEV;
 	}
 
-	/*
-	 * Open up protections for IPI operations (and AMO operations on
-	 * Shub 1.1 systems).
-	 */
-	xpc_allow_IPI_ops();
-
-	/*
-	 * Interrupts being processed will increment this atomic variable and
-	 * awaken the heartbeat thread which will process the interrupts.
-	 */
-	atomic_set(&xpc_act_IRQ_rcvd, 0);
+	if (ret != 0)
+		return ret;
 
-	/*
-	 * This is safe to do before the xpc_hb_checker thread has started
-	 * because the handler releases a wait queue.  If an interrupt is
-	 * received before the thread is waiting, it will not go to sleep,
-	 * but rather immediately process the interrupt.
-	 */
-	ret = request_irq(SGI_XPC_ACTIVATE, xpc_act_IRQ_handler, 0,
-			  "xpc hb", NULL);
+	ret = xpc_setup_partitions();
 	if (ret != 0) {
-		dev_err(xpc_part, "can't register ACTIVATE IRQ handler, "
-			"errno=%d\n", -ret);
-
-		xpc_restrict_IPI_ops();
-
-		if (xpc_sysctl)
-			unregister_sysctl_table(xpc_sysctl);
-
-		kfree(xpc_remote_copy_buffer_base);
-		return -EBUSY;
+		dev_err(xpc_part, "can't get memory for partition structure\n");
+		goto out_1;
 	}
 
+	xpc_sysctl = register_sysctl_table(xpc_sys_dir);
+
 	/*
 	 * Fill the partition reserved page with the information needed by
 	 * other partitions to discover we are alive and establish initial
 	 * communications.
 	 */
-	xpc_rsvd_page = xpc_rsvd_page_init();
-	if (xpc_rsvd_page == NULL) {
-		dev_err(xpc_part, "could not setup our reserved page\n");
-
-		free_irq(SGI_XPC_ACTIVATE, NULL);
-		xpc_restrict_IPI_ops();
-
-		if (xpc_sysctl)
-			unregister_sysctl_table(xpc_sysctl);
-
-		kfree(xpc_remote_copy_buffer_base);
-		return -EBUSY;
+	ret = xpc_setup_rsvd_page();
+	if (ret != 0) {
+		dev_err(xpc_part, "can't setup our reserved page\n");
+		goto out_2;
 	}
 
 	/* add ourselves to the reboot_notifier_list */
@@ -1236,9 +1314,6 @@ xpc_init(void)
 	if (ret != 0)
 		dev_warn(xpc_part, "can't register die notifier\n");
 
-	init_timer(&xpc_hb_timer);
-	xpc_hb_timer.function = xpc_hb_beater;
-
 	/*
 	 * The real work-horse behind xpc.  This processes incoming
 	 * interrupts and monitors remote heartbeats.
@@ -1246,25 +1321,8 @@ xpc_init(void)
 	kthread = kthread_run(xpc_hb_checker, NULL, XPC_HB_CHECK_THREAD_NAME);
 	if (IS_ERR(kthread)) {
 		dev_err(xpc_part, "failed while forking hb check thread\n");
-
-		/* indicate to others that our reserved page is uninitialized */
-		xpc_rsvd_page->vars_pa = 0;
-
-		/* take ourselves off of the reboot_notifier_list */
-		(void)unregister_reboot_notifier(&xpc_reboot_notifier);
-
-		/* take ourselves off of the die_notifier list */
-		(void)unregister_die_notifier(&xpc_die_notifier);
-
-		del_timer_sync(&xpc_hb_timer);
-		free_irq(SGI_XPC_ACTIVATE, NULL);
-		xpc_restrict_IPI_ops();
-
-		if (xpc_sysctl)
-			unregister_sysctl_table(xpc_sysctl);
-
-		kfree(xpc_remote_copy_buffer_base);
-		return -EBUSY;
+		ret = -EBUSY;
+		goto out_3;
 	}
 
 	/*
@@ -1286,11 +1344,28 @@ xpc_init(void)
 
 	/* set the interface to point at XPC's functions */
 	xpc_set_interface(xpc_initiate_connect, xpc_initiate_disconnect,
-			  xpc_initiate_allocate, xpc_initiate_send,
-			  xpc_initiate_send_notify, xpc_initiate_received,
-			  xpc_initiate_partid_to_nasids);
+			  xpc_initiate_send, xpc_initiate_send_notify,
+			  xpc_initiate_received, xpc_initiate_partid_to_nasids);
 
 	return 0;
+
+	/* initialization was not successful */
+out_3:
+	xpc_teardown_rsvd_page();
+
+	(void)unregister_die_notifier(&xpc_die_notifier);
+	(void)unregister_reboot_notifier(&xpc_reboot_notifier);
+out_2:
+	if (xpc_sysctl)
+		unregister_sysctl_table(xpc_sysctl);
+
+	xpc_teardown_partitions();
+out_1:
+	if (is_shub())
+		xpc_exit_sn2();
+	else
+		xpc_exit_uv();
+	return ret;
 }
 
 module_init(xpc_init);
@@ -1315,9 +1390,9 @@ module_param(xpc_hb_check_interval, int, 0);
 MODULE_PARM_DESC(xpc_hb_check_interval, "Number of seconds between "
 		 "heartbeat checks.");
 
-module_param(xpc_disengage_request_timelimit, int, 0);
-MODULE_PARM_DESC(xpc_disengage_request_timelimit, "Number of seconds to wait "
-		 "for disengage request to complete.");
+module_param(xpc_disengage_timelimit, int, 0);
+MODULE_PARM_DESC(xpc_disengage_timelimit, "Number of seconds to wait "
+		 "for disengage to complete.");
 
 module_param(xpc_kdebug_ignore, int, 0);
 MODULE_PARM_DESC(xpc_kdebug_ignore, "Should lack of heartbeat be ignored by "
diff --git a/drivers/misc/sgi-xp/xpc_partition.c b/drivers/misc/sgi-xp/xpc_partition.c
index 7dd4b5812c42..6722f6fe4dc7 100644
--- a/drivers/misc/sgi-xp/xpc_partition.c
+++ b/drivers/misc/sgi-xp/xpc_partition.c
@@ -15,57 +15,22 @@
  *
  */
 
-#include <linux/kernel.h>
-#include <linux/sysctl.h>
-#include <linux/cache.h>
-#include <linux/mmzone.h>
-#include <linux/nodemask.h>
-#include <asm/uncached.h>
-#include <asm/sn/bte.h>
-#include <asm/sn/intr.h>
-#include <asm/sn/sn_sal.h>
-#include <asm/sn/nodepda.h>
-#include <asm/sn/addrs.h>
+#include <linux/device.h>
+#include <linux/hardirq.h>
 #include "xpc.h"
 
 /* XPC is exiting flag */
 int xpc_exiting;
 
-/* SH_IPI_ACCESS shub register value on startup */
-static u64 xpc_sh1_IPI_access;
-static u64 xpc_sh2_IPI_access0;
-static u64 xpc_sh2_IPI_access1;
-static u64 xpc_sh2_IPI_access2;
-static u64 xpc_sh2_IPI_access3;
-
-/* original protection values for each node */
-u64 xpc_prot_vec[MAX_NUMNODES];
-
 /* this partition's reserved page pointers */
 struct xpc_rsvd_page *xpc_rsvd_page;
-static u64 *xpc_part_nasids;
-static u64 *xpc_mach_nasids;
-struct xpc_vars *xpc_vars;
-struct xpc_vars_part *xpc_vars_part;
+static unsigned long *xpc_part_nasids;
+unsigned long *xpc_mach_nasids;
 
-static int xp_nasid_mask_bytes;	/* actual size in bytes of nasid mask */
-static int xp_nasid_mask_words;	/* actual size in words of nasid mask */
-
-/*
- * For performance reasons, each entry of xpc_partitions[] is cacheline
- * aligned. And xpc_partitions[] is padded with an additional entry at the
- * end so that the last legitimate entry doesn't share its cacheline with
- * another variable.
- */
-struct xpc_partition xpc_partitions[XP_MAX_PARTITIONS + 1];
+static int xpc_nasid_mask_nbytes;	/* #of bytes in nasid mask */
+int xpc_nasid_mask_nlongs;	/* #of longs in nasid mask */
 
-/*
- * Generic buffer used to store a local copy of portions of a remote
- * partition's reserved page (either its header and part_nasids mask,
- * or its vars).
- */
-char *xpc_remote_copy_buffer;
-void *xpc_remote_copy_buffer_base;
+struct xpc_partition *xpc_partitions;
 
 /*
  * Guarantee that the kmalloc'd memory is cacheline aligned.
@@ -95,56 +60,59 @@ xpc_kmalloc_cacheline_aligned(size_t size, gfp_t flags, void **base)
  * Given a nasid, get the physical address of the  partition's reserved page
  * for that nasid. This function returns 0 on any error.
  */
-static u64
+static unsigned long
 xpc_get_rsvd_page_pa(int nasid)
 {
-	bte_result_t bte_res;
-	s64 status;
+	enum xp_retval ret;
 	u64 cookie = 0;
-	u64 rp_pa = nasid;	/* seed with nasid */
-	u64 len = 0;
-	u64 buf = buf;
-	u64 buf_len = 0;
+	unsigned long rp_pa = nasid;	/* seed with nasid */
+	size_t len = 0;
+	size_t buf_len = 0;
+	void *buf = buf;
 	void *buf_base = NULL;
 
 	while (1) {
 
-		status = sn_partition_reserved_page_pa(buf, &cookie, &rp_pa,
-						       &len);
+		/* !!! rp_pa will need to be _gpa on UV.
+		 * ??? So do we save it into the architecture specific parts
+		 * ??? of the xpc_partition structure? Do we rename this
+		 * ??? function or have two versions? Rename rp_pa for UV to
+		 * ??? rp_gpa?
+		 */
+		ret = xpc_get_partition_rsvd_page_pa(buf, &cookie, &rp_pa,
+						     &len);
 
-		dev_dbg(xpc_part, "SAL returned with status=%li, cookie="
-			"0x%016lx, address=0x%016lx, len=0x%016lx\n",
-			status, cookie, rp_pa, len);
+		dev_dbg(xpc_part, "SAL returned with ret=%d, cookie=0x%016lx, "
+			"address=0x%016lx, len=0x%016lx\n", ret,
+			(unsigned long)cookie, rp_pa, len);
 
-		if (status != SALRET_MORE_PASSES)
+		if (ret != xpNeedMoreInfo)
 			break;
 
+		/* !!! L1_CACHE_ALIGN() is only a sn2-bte_copy requirement */
 		if (L1_CACHE_ALIGN(len) > buf_len) {
 			kfree(buf_base);
 			buf_len = L1_CACHE_ALIGN(len);
-			buf = (u64)xpc_kmalloc_cacheline_aligned(buf_len,
-								 GFP_KERNEL,
-								 &buf_base);
+			buf = xpc_kmalloc_cacheline_aligned(buf_len, GFP_KERNEL,
+							    &buf_base);
 			if (buf_base == NULL) {
 				dev_err(xpc_part, "unable to kmalloc "
 					"len=0x%016lx\n", buf_len);
-				status = SALRET_ERROR;
+				ret = xpNoMemory;
 				break;
 			}
 		}
 
-		bte_res = xp_bte_copy(rp_pa, buf, buf_len,
-				      (BTE_NOTIFY | BTE_WACQUIRE), NULL);
-		if (bte_res != BTE_SUCCESS) {
-			dev_dbg(xpc_part, "xp_bte_copy failed %i\n", bte_res);
-			status = SALRET_ERROR;
+		ret = xp_remote_memcpy(xp_pa(buf), rp_pa, buf_len);
+		if (ret != xpSuccess) {
+			dev_dbg(xpc_part, "xp_remote_memcpy failed %d\n", ret);
 			break;
 		}
 	}
 
 	kfree(buf_base);
 
-	if (status != SALRET_OK)
+	if (ret != xpSuccess)
 		rp_pa = 0;
 
 	dev_dbg(xpc_part, "reserved page at phys address 0x%016lx\n", rp_pa);
@@ -156,300 +124,77 @@ xpc_get_rsvd_page_pa(int nasid)
  * other partitions to discover we are alive and establish initial
  * communications.
  */
-struct xpc_rsvd_page *
-xpc_rsvd_page_init(void)
+int
+xpc_setup_rsvd_page(void)
 {
+	int ret;
 	struct xpc_rsvd_page *rp;
-	AMO_t *amos_page;
-	u64 rp_pa, nasid_array = 0;
-	int i, ret;
+	unsigned long rp_pa;
+	unsigned long new_ts_jiffies;
 
 	/* get the local reserved page's address */
 
 	preempt_disable();
-	rp_pa = xpc_get_rsvd_page_pa(cpuid_to_nasid(smp_processor_id()));
+	rp_pa = xpc_get_rsvd_page_pa(xp_cpu_to_nasid(smp_processor_id()));
 	preempt_enable();
 	if (rp_pa == 0) {
 		dev_err(xpc_part, "SAL failed to locate the reserved page\n");
-		return NULL;
+		return -ESRCH;
 	}
 	rp = (struct xpc_rsvd_page *)__va(rp_pa);
 
-	if (rp->partid != sn_partition_id) {
-		dev_err(xpc_part, "the reserved page's partid of %d should be "
-			"%d\n", rp->partid, sn_partition_id);
-		return NULL;
+	if (rp->SAL_version < 3) {
+		/* SAL_versions < 3 had a SAL_partid defined as a u8 */
+		rp->SAL_partid &= 0xff;
+	}
+	BUG_ON(rp->SAL_partid != xp_partition_id);
+
+	if (rp->SAL_partid < 0 || rp->SAL_partid >= xp_max_npartitions) {
+		dev_err(xpc_part, "the reserved page's partid of %d is outside "
+			"supported range (< 0 || >= %d)\n", rp->SAL_partid,
+			xp_max_npartitions);
+		return -EINVAL;
 	}
 
 	rp->version = XPC_RP_VERSION;
+	rp->max_npartitions = xp_max_npartitions;
 
 	/* establish the actual sizes of the nasid masks */
 	if (rp->SAL_version == 1) {
 		/* SAL_version 1 didn't set the nasids_size field */
-		rp->nasids_size = 128;
+		rp->SAL_nasids_size = 128;
 	}
-	xp_nasid_mask_bytes = rp->nasids_size;
-	xp_nasid_mask_words = xp_nasid_mask_bytes / 8;
+	xpc_nasid_mask_nbytes = rp->SAL_nasids_size;
+	xpc_nasid_mask_nlongs = BITS_TO_LONGS(rp->SAL_nasids_size *
+					      BITS_PER_BYTE);
 
 	/* setup the pointers to the various items in the reserved page */
 	xpc_part_nasids = XPC_RP_PART_NASIDS(rp);
 	xpc_mach_nasids = XPC_RP_MACH_NASIDS(rp);
-	xpc_vars = XPC_RP_VARS(rp);
-	xpc_vars_part = XPC_RP_VARS_PART(rp);
-
-	/*
-	 * Before clearing xpc_vars, see if a page of AMOs had been previously
-	 * allocated. If not we'll need to allocate one and set permissions
-	 * so that cross-partition AMOs are allowed.
-	 *
-	 * The allocated AMO page needs MCA reporting to remain disabled after
-	 * XPC has unloaded.  To make this work, we keep a copy of the pointer
-	 * to this page (i.e., amos_page) in the struct xpc_vars structure,
-	 * which is pointed to by the reserved page, and re-use that saved copy
-	 * on subsequent loads of XPC. This AMO page is never freed, and its
-	 * memory protections are never restricted.
-	 */
-	amos_page = xpc_vars->amos_page;
-	if (amos_page == NULL) {
-		amos_page = (AMO_t *)TO_AMO(uncached_alloc_page(0, 1));
-		if (amos_page == NULL) {
-			dev_err(xpc_part, "can't allocate page of AMOs\n");
-			return NULL;
-		}
-
-		/*
-		 * Open up AMO-R/W to cpu.  This is done for Shub 1.1 systems
-		 * when xpc_allow_IPI_ops() is called via xpc_hb_init().
-		 */
-		if (!enable_shub_wars_1_1()) {
-			ret = sn_change_memprotect(ia64_tpa((u64)amos_page),
-						   PAGE_SIZE,
-						   SN_MEMPROT_ACCESS_CLASS_1,
-						   &nasid_array);
-			if (ret != 0) {
-				dev_err(xpc_part, "can't change memory "
-					"protections\n");
-				uncached_free_page(__IA64_UNCACHED_OFFSET |
-						   TO_PHYS((u64)amos_page), 1);
-				return NULL;
-			}
-		}
-	} else if (!IS_AMO_ADDRESS((u64)amos_page)) {
-		/*
-		 * EFI's XPBOOT can also set amos_page in the reserved page,
-		 * but it happens to leave it as an uncached physical address
-		 * and we need it to be an uncached virtual, so we'll have to
-		 * convert it.
-		 */
-		if (!IS_AMO_PHYS_ADDRESS((u64)amos_page)) {
-			dev_err(xpc_part, "previously used amos_page address "
-				"is bad = 0x%p\n", (void *)amos_page);
-			return NULL;
-		}
-		amos_page = (AMO_t *)TO_AMO((u64)amos_page);
-	}
-
-	/* clear xpc_vars */
-	memset(xpc_vars, 0, sizeof(struct xpc_vars));
-
-	xpc_vars->version = XPC_V_VERSION;
-	xpc_vars->act_nasid = cpuid_to_nasid(0);
-	xpc_vars->act_phys_cpuid = cpu_physical_id(0);
-	xpc_vars->vars_part_pa = __pa(xpc_vars_part);
-	xpc_vars->amos_page_pa = ia64_tpa((u64)amos_page);
-	xpc_vars->amos_page = amos_page;	/* save for next load of XPC */
-
-	/* clear xpc_vars_part */
-	memset((u64 *)xpc_vars_part, 0, sizeof(struct xpc_vars_part) *
-	       XP_MAX_PARTITIONS);
-
-	/* initialize the activate IRQ related AMO variables */
-	for (i = 0; i < xp_nasid_mask_words; i++)
-		(void)xpc_IPI_init(XPC_ACTIVATE_IRQ_AMOS + i);
-
-	/* initialize the engaged remote partitions related AMO variables */
-	(void)xpc_IPI_init(XPC_ENGAGED_PARTITIONS_AMO);
-	(void)xpc_IPI_init(XPC_DISENGAGE_REQUEST_AMO);
 
-	/* timestamp of when reserved page was setup by XPC */
-	rp->stamp = CURRENT_TIME;
+	ret = xpc_setup_rsvd_page_sn(rp);
+	if (ret != 0)
+		return ret;
 
 	/*
+	 * Set timestamp of when reserved page was setup by XPC.
 	 * This signifies to the remote partition that our reserved
 	 * page is initialized.
 	 */
-	rp->vars_pa = __pa(xpc_vars);
+	new_ts_jiffies = jiffies;
+	if (new_ts_jiffies == 0 || new_ts_jiffies == rp->ts_jiffies)
+		new_ts_jiffies++;
+	rp->ts_jiffies = new_ts_jiffies;
 
-	return rp;
+	xpc_rsvd_page = rp;
+	return 0;
 }
 
-/*
- * Change protections to allow IPI operations (and AMO operations on
- * Shub 1.1 systems).
- */
 void
-xpc_allow_IPI_ops(void)
+xpc_teardown_rsvd_page(void)
 {
-	int node;
-	int nasid;
-
-	/* >>> Change SH_IPI_ACCESS code to use SAL call once it is available */
-
-	if (is_shub2()) {
-		xpc_sh2_IPI_access0 =
-		    (u64)HUB_L((u64 *)LOCAL_MMR_ADDR(SH2_IPI_ACCESS0));
-		xpc_sh2_IPI_access1 =
-		    (u64)HUB_L((u64 *)LOCAL_MMR_ADDR(SH2_IPI_ACCESS1));
-		xpc_sh2_IPI_access2 =
-		    (u64)HUB_L((u64 *)LOCAL_MMR_ADDR(SH2_IPI_ACCESS2));
-		xpc_sh2_IPI_access3 =
-		    (u64)HUB_L((u64 *)LOCAL_MMR_ADDR(SH2_IPI_ACCESS3));
-
-		for_each_online_node(node) {
-			nasid = cnodeid_to_nasid(node);
-			HUB_S((u64 *)GLOBAL_MMR_ADDR(nasid, SH2_IPI_ACCESS0),
-			      -1UL);
-			HUB_S((u64 *)GLOBAL_MMR_ADDR(nasid, SH2_IPI_ACCESS1),
-			      -1UL);
-			HUB_S((u64 *)GLOBAL_MMR_ADDR(nasid, SH2_IPI_ACCESS2),
-			      -1UL);
-			HUB_S((u64 *)GLOBAL_MMR_ADDR(nasid, SH2_IPI_ACCESS3),
-			      -1UL);
-		}
-
-	} else {
-		xpc_sh1_IPI_access =
-		    (u64)HUB_L((u64 *)LOCAL_MMR_ADDR(SH1_IPI_ACCESS));
-
-		for_each_online_node(node) {
-			nasid = cnodeid_to_nasid(node);
-			HUB_S((u64 *)GLOBAL_MMR_ADDR(nasid, SH1_IPI_ACCESS),
-			      -1UL);
-
-			/*
-			 * Since the BIST collides with memory operations on
-			 * SHUB 1.1 sn_change_memprotect() cannot be used.
-			 */
-			if (enable_shub_wars_1_1()) {
-				/* open up everything */
-				xpc_prot_vec[node] = (u64)HUB_L((u64 *)
-								GLOBAL_MMR_ADDR
-								(nasid,
-						  SH1_MD_DQLP_MMR_DIR_PRIVEC0));
-				HUB_S((u64 *)
-				      GLOBAL_MMR_ADDR(nasid,
-						   SH1_MD_DQLP_MMR_DIR_PRIVEC0),
-				      -1UL);
-				HUB_S((u64 *)
-				      GLOBAL_MMR_ADDR(nasid,
-						   SH1_MD_DQRP_MMR_DIR_PRIVEC0),
-				      -1UL);
-			}
-		}
-	}
-}
-
-/*
- * Restrict protections to disallow IPI operations (and AMO operations on
- * Shub 1.1 systems).
- */
-void
-xpc_restrict_IPI_ops(void)
-{
-	int node;
-	int nasid;
-
-	/* >>> Change SH_IPI_ACCESS code to use SAL call once it is available */
-
-	if (is_shub2()) {
-
-		for_each_online_node(node) {
-			nasid = cnodeid_to_nasid(node);
-			HUB_S((u64 *)GLOBAL_MMR_ADDR(nasid, SH2_IPI_ACCESS0),
-			      xpc_sh2_IPI_access0);
-			HUB_S((u64 *)GLOBAL_MMR_ADDR(nasid, SH2_IPI_ACCESS1),
-			      xpc_sh2_IPI_access1);
-			HUB_S((u64 *)GLOBAL_MMR_ADDR(nasid, SH2_IPI_ACCESS2),
-			      xpc_sh2_IPI_access2);
-			HUB_S((u64 *)GLOBAL_MMR_ADDR(nasid, SH2_IPI_ACCESS3),
-			      xpc_sh2_IPI_access3);
-		}
-
-	} else {
-
-		for_each_online_node(node) {
-			nasid = cnodeid_to_nasid(node);
-			HUB_S((u64 *)GLOBAL_MMR_ADDR(nasid, SH1_IPI_ACCESS),
-			      xpc_sh1_IPI_access);
-
-			if (enable_shub_wars_1_1()) {
-				HUB_S((u64 *)GLOBAL_MMR_ADDR(nasid,
-						   SH1_MD_DQLP_MMR_DIR_PRIVEC0),
-				      xpc_prot_vec[node]);
-				HUB_S((u64 *)GLOBAL_MMR_ADDR(nasid,
-						   SH1_MD_DQRP_MMR_DIR_PRIVEC0),
-				      xpc_prot_vec[node]);
-			}
-		}
-	}
-}
-
-/*
- * At periodic intervals, scan through all active partitions and ensure
- * their heartbeat is still active.  If not, the partition is deactivated.
- */
-void
-xpc_check_remote_hb(void)
-{
-	struct xpc_vars *remote_vars;
-	struct xpc_partition *part;
-	short partid;
-	bte_result_t bres;
-
-	remote_vars = (struct xpc_vars *)xpc_remote_copy_buffer;
-
-	for (partid = 1; partid < XP_MAX_PARTITIONS; partid++) {
-
-		if (xpc_exiting)
-			break;
-
-		if (partid == sn_partition_id)
-			continue;
-
-		part = &xpc_partitions[partid];
-
-		if (part->act_state == XPC_P_INACTIVE ||
-		    part->act_state == XPC_P_DEACTIVATING) {
-			continue;
-		}
-
-		/* pull the remote_hb cache line */
-		bres = xp_bte_copy(part->remote_vars_pa,
-				   (u64)remote_vars,
-				   XPC_RP_VARS_SIZE,
-				   (BTE_NOTIFY | BTE_WACQUIRE), NULL);
-		if (bres != BTE_SUCCESS) {
-			XPC_DEACTIVATE_PARTITION(part,
-						 xpc_map_bte_errors(bres));
-			continue;
-		}
-
-		dev_dbg(xpc_part, "partid = %d, heartbeat = %ld, last_heartbeat"
-			" = %ld, heartbeat_offline = %ld, HB_mask = 0x%lx\n",
-			partid, remote_vars->heartbeat, part->last_heartbeat,
-			remote_vars->heartbeat_offline,
-			remote_vars->heartbeating_to_mask);
-
-		if (((remote_vars->heartbeat == part->last_heartbeat) &&
-		     (remote_vars->heartbeat_offline == 0)) ||
-		    !xpc_hb_allowed(sn_partition_id, remote_vars)) {
-
-			XPC_DEACTIVATE_PARTITION(part, xpNoHeartbeat);
-			continue;
-		}
-
-		part->last_heartbeat = remote_vars->heartbeat;
-	}
+	/* a zero timestamp indicates our rsvd page is not initialized */
+	xpc_rsvd_page->ts_jiffies = 0;
 }
 
 /*
@@ -459,11 +204,12 @@ xpc_check_remote_hb(void)
  * is large enough to contain a copy of their reserved page header and
  * part_nasids mask.
  */
-static enum xp_retval
-xpc_get_remote_rp(int nasid, u64 *discovered_nasids,
-		  struct xpc_rsvd_page *remote_rp, u64 *remote_rp_pa)
+enum xp_retval
+xpc_get_remote_rp(int nasid, unsigned long *discovered_nasids,
+		  struct xpc_rsvd_page *remote_rp, unsigned long *remote_rp_pa)
 {
-	int bres, i;
+	int l;
+	enum xp_retval ret;
 
 	/* get the reserved page's physical address */
 
@@ -472,355 +218,45 @@ xpc_get_remote_rp(int nasid, u64 *discovered_nasids,
 		return xpNoRsvdPageAddr;
 
 	/* pull over the reserved page header and part_nasids mask */
-	bres = xp_bte_copy(*remote_rp_pa, (u64)remote_rp,
-			   XPC_RP_HEADER_SIZE + xp_nasid_mask_bytes,
-			   (BTE_NOTIFY | BTE_WACQUIRE), NULL);
-	if (bres != BTE_SUCCESS)
-		return xpc_map_bte_errors(bres);
+	ret = xp_remote_memcpy(xp_pa(remote_rp), *remote_rp_pa,
+			       XPC_RP_HEADER_SIZE + xpc_nasid_mask_nbytes);
+	if (ret != xpSuccess)
+		return ret;
 
 	if (discovered_nasids != NULL) {
-		u64 *remote_part_nasids = XPC_RP_PART_NASIDS(remote_rp);
-
-		for (i = 0; i < xp_nasid_mask_words; i++)
-			discovered_nasids[i] |= remote_part_nasids[i];
-	}
-
-	/* check that the partid is for another partition */
+		unsigned long *remote_part_nasids =
+		    XPC_RP_PART_NASIDS(remote_rp);
 
-	if (remote_rp->partid < 1 ||
-	    remote_rp->partid > (XP_MAX_PARTITIONS - 1)) {
-		return xpInvalidPartid;
+		for (l = 0; l < xpc_nasid_mask_nlongs; l++)
+			discovered_nasids[l] |= remote_part_nasids[l];
 	}
 
-	if (remote_rp->partid == sn_partition_id)
-		return xpLocalPartid;
+	/* zero timestamp indicates the reserved page has not been setup */
+	if (remote_rp->ts_jiffies == 0)
+		return xpRsvdPageNotSet;
 
 	if (XPC_VERSION_MAJOR(remote_rp->version) !=
 	    XPC_VERSION_MAJOR(XPC_RP_VERSION)) {
 		return xpBadVersion;
 	}
 
-	return xpSuccess;
-}
-
-/*
- * Get a copy of the remote partition's XPC variables from the reserved page.
- *
- * remote_vars points to a buffer that is cacheline aligned for BTE copies and
- * assumed to be of size XPC_RP_VARS_SIZE.
- */
-static enum xp_retval
-xpc_get_remote_vars(u64 remote_vars_pa, struct xpc_vars *remote_vars)
-{
-	int bres;
-
-	if (remote_vars_pa == 0)
-		return xpVarsNotSet;
-
-	/* pull over the cross partition variables */
-	bres = xp_bte_copy(remote_vars_pa, (u64)remote_vars, XPC_RP_VARS_SIZE,
-			   (BTE_NOTIFY | BTE_WACQUIRE), NULL);
-	if (bres != BTE_SUCCESS)
-		return xpc_map_bte_errors(bres);
-
-	if (XPC_VERSION_MAJOR(remote_vars->version) !=
-	    XPC_VERSION_MAJOR(XPC_V_VERSION)) {
-		return xpBadVersion;
-	}
-
-	return xpSuccess;
-}
-
-/*
- * Update the remote partition's info.
- */
-static void
-xpc_update_partition_info(struct xpc_partition *part, u8 remote_rp_version,
-			  struct timespec *remote_rp_stamp, u64 remote_rp_pa,
-			  u64 remote_vars_pa, struct xpc_vars *remote_vars)
-{
-	part->remote_rp_version = remote_rp_version;
-	dev_dbg(xpc_part, "  remote_rp_version = 0x%016x\n",
-		part->remote_rp_version);
-
-	part->remote_rp_stamp = *remote_rp_stamp;
-	dev_dbg(xpc_part, "  remote_rp_stamp (tv_sec = 0x%lx tv_nsec = 0x%lx\n",
-		part->remote_rp_stamp.tv_sec, part->remote_rp_stamp.tv_nsec);
-
-	part->remote_rp_pa = remote_rp_pa;
-	dev_dbg(xpc_part, "  remote_rp_pa = 0x%016lx\n", part->remote_rp_pa);
-
-	part->remote_vars_pa = remote_vars_pa;
-	dev_dbg(xpc_part, "  remote_vars_pa = 0x%016lx\n",
-		part->remote_vars_pa);
-
-	part->last_heartbeat = remote_vars->heartbeat;
-	dev_dbg(xpc_part, "  last_heartbeat = 0x%016lx\n",
-		part->last_heartbeat);
-
-	part->remote_vars_part_pa = remote_vars->vars_part_pa;
-	dev_dbg(xpc_part, "  remote_vars_part_pa = 0x%016lx\n",
-		part->remote_vars_part_pa);
-
-	part->remote_act_nasid = remote_vars->act_nasid;
-	dev_dbg(xpc_part, "  remote_act_nasid = 0x%x\n",
-		part->remote_act_nasid);
-
-	part->remote_act_phys_cpuid = remote_vars->act_phys_cpuid;
-	dev_dbg(xpc_part, "  remote_act_phys_cpuid = 0x%x\n",
-		part->remote_act_phys_cpuid);
-
-	part->remote_amos_page_pa = remote_vars->amos_page_pa;
-	dev_dbg(xpc_part, "  remote_amos_page_pa = 0x%lx\n",
-		part->remote_amos_page_pa);
-
-	part->remote_vars_version = remote_vars->version;
-	dev_dbg(xpc_part, "  remote_vars_version = 0x%x\n",
-		part->remote_vars_version);
-}
-
-/*
- * Prior code has determined the nasid which generated an IPI.  Inspect
- * that nasid to determine if its partition needs to be activated or
- * deactivated.
- *
- * A partition is consider "awaiting activation" if our partition
- * flags indicate it is not active and it has a heartbeat.  A
- * partition is considered "awaiting deactivation" if our partition
- * flags indicate it is active but it has no heartbeat or it is not
- * sending its heartbeat to us.
- *
- * To determine the heartbeat, the remote nasid must have a properly
- * initialized reserved page.
- */
-static void
-xpc_identify_act_IRQ_req(int nasid)
-{
-	struct xpc_rsvd_page *remote_rp;
-	struct xpc_vars *remote_vars;
-	u64 remote_rp_pa;
-	u64 remote_vars_pa;
-	int remote_rp_version;
-	int reactivate = 0;
-	int stamp_diff;
-	struct timespec remote_rp_stamp = { 0, 0 };
-	short partid;
-	struct xpc_partition *part;
-	enum xp_retval ret;
-
-	/* pull over the reserved page structure */
-
-	remote_rp = (struct xpc_rsvd_page *)xpc_remote_copy_buffer;
-
-	ret = xpc_get_remote_rp(nasid, NULL, remote_rp, &remote_rp_pa);
-	if (ret != xpSuccess) {
-		dev_warn(xpc_part, "unable to get reserved page from nasid %d, "
-			 "which sent interrupt, reason=%d\n", nasid, ret);
-		return;
-	}
-
-	remote_vars_pa = remote_rp->vars_pa;
-	remote_rp_version = remote_rp->version;
-	if (XPC_SUPPORTS_RP_STAMP(remote_rp_version))
-		remote_rp_stamp = remote_rp->stamp;
-
-	partid = remote_rp->partid;
-	part = &xpc_partitions[partid];
-
-	/* pull over the cross partition variables */
-
-	remote_vars = (struct xpc_vars *)xpc_remote_copy_buffer;
-
-	ret = xpc_get_remote_vars(remote_vars_pa, remote_vars);
-	if (ret != xpSuccess) {
-
-		dev_warn(xpc_part, "unable to get XPC variables from nasid %d, "
-			 "which sent interrupt, reason=%d\n", nasid, ret);
-
-		XPC_DEACTIVATE_PARTITION(part, ret);
-		return;
-	}
-
-	part->act_IRQ_rcvd++;
-
-	dev_dbg(xpc_part, "partid for nasid %d is %d; IRQs = %d; HB = "
-		"%ld:0x%lx\n", (int)nasid, (int)partid, part->act_IRQ_rcvd,
-		remote_vars->heartbeat, remote_vars->heartbeating_to_mask);
-
-	if (xpc_partition_disengaged(part) &&
-	    part->act_state == XPC_P_INACTIVE) {
-
-		xpc_update_partition_info(part, remote_rp_version,
-					  &remote_rp_stamp, remote_rp_pa,
-					  remote_vars_pa, remote_vars);
-
-		if (XPC_SUPPORTS_DISENGAGE_REQUEST(part->remote_vars_version)) {
-			if (xpc_partition_disengage_requested(1UL << partid)) {
-				/*
-				 * Other side is waiting on us to disengage,
-				 * even though we already have.
-				 */
-				return;
-			}
-		} else {
-			/* other side doesn't support disengage requests */
-			xpc_clear_partition_disengage_request(1UL << partid);
-		}
-
-		xpc_activate_partition(part);
-		return;
-	}
-
-	DBUG_ON(part->remote_rp_version == 0);
-	DBUG_ON(part->remote_vars_version == 0);
-
-	if (!XPC_SUPPORTS_RP_STAMP(part->remote_rp_version)) {
-		DBUG_ON(XPC_SUPPORTS_DISENGAGE_REQUEST(part->
-						       remote_vars_version));
-
-		if (!XPC_SUPPORTS_RP_STAMP(remote_rp_version)) {
-			DBUG_ON(XPC_SUPPORTS_DISENGAGE_REQUEST(remote_vars->
-							       version));
-			/* see if the other side rebooted */
-			if (part->remote_amos_page_pa ==
-			    remote_vars->amos_page_pa &&
-			    xpc_hb_allowed(sn_partition_id, remote_vars)) {
-				/* doesn't look that way, so ignore the IPI */
-				return;
-			}
-		}
-
-		/*
-		 * Other side rebooted and previous XPC didn't support the
-		 * disengage request, so we don't need to do anything special.
-		 */
-
-		xpc_update_partition_info(part, remote_rp_version,
-					  &remote_rp_stamp, remote_rp_pa,
-					  remote_vars_pa, remote_vars);
-		part->reactivate_nasid = nasid;
-		XPC_DEACTIVATE_PARTITION(part, xpReactivating);
-		return;
-	}
-
-	DBUG_ON(!XPC_SUPPORTS_DISENGAGE_REQUEST(part->remote_vars_version));
-
-	if (!XPC_SUPPORTS_RP_STAMP(remote_rp_version)) {
-		DBUG_ON(!XPC_SUPPORTS_DISENGAGE_REQUEST(remote_vars->version));
-
-		/*
-		 * Other side rebooted and previous XPC did support the
-		 * disengage request, but the new one doesn't.
-		 */
-
-		xpc_clear_partition_engaged(1UL << partid);
-		xpc_clear_partition_disengage_request(1UL << partid);
-
-		xpc_update_partition_info(part, remote_rp_version,
-					  &remote_rp_stamp, remote_rp_pa,
-					  remote_vars_pa, remote_vars);
-		reactivate = 1;
-
-	} else {
-		DBUG_ON(!XPC_SUPPORTS_DISENGAGE_REQUEST(remote_vars->version));
-
-		stamp_diff = xpc_compare_stamps(&part->remote_rp_stamp,
-						&remote_rp_stamp);
-		if (stamp_diff != 0) {
-			DBUG_ON(stamp_diff >= 0);
-
-			/*
-			 * Other side rebooted and the previous XPC did support
-			 * the disengage request, as does the new one.
-			 */
-
-			DBUG_ON(xpc_partition_engaged(1UL << partid));
-			DBUG_ON(xpc_partition_disengage_requested(1UL <<
-								  partid));
-
-			xpc_update_partition_info(part, remote_rp_version,
-						  &remote_rp_stamp,
-						  remote_rp_pa, remote_vars_pa,
-						  remote_vars);
-			reactivate = 1;
-		}
-	}
-
-	if (part->disengage_request_timeout > 0 &&
-	    !xpc_partition_disengaged(part)) {
-		/* still waiting on other side to disengage from us */
-		return;
-	}
-
-	if (reactivate) {
-		part->reactivate_nasid = nasid;
-		XPC_DEACTIVATE_PARTITION(part, xpReactivating);
-
-	} else if (XPC_SUPPORTS_DISENGAGE_REQUEST(part->remote_vars_version) &&
-		   xpc_partition_disengage_requested(1UL << partid)) {
-		XPC_DEACTIVATE_PARTITION(part, xpOtherGoingDown);
+	/* check that both remote and local partids are valid for each side */
+	if (remote_rp->SAL_partid < 0 ||
+	    remote_rp->SAL_partid >= xp_max_npartitions ||
+	    remote_rp->max_npartitions <= xp_partition_id) {
+		return xpInvalidPartid;
 	}
-}
 
-/*
- * Loop through the activation AMO variables and process any bits
- * which are set.  Each bit indicates a nasid sending a partition
- * activation or deactivation request.
- *
- * Return #of IRQs detected.
- */
-int
-xpc_identify_act_IRQ_sender(void)
-{
-	int word, bit;
-	u64 nasid_mask;
-	u64 nasid;		/* remote nasid */
-	int n_IRQs_detected = 0;
-	AMO_t *act_amos;
-
-	act_amos = xpc_vars->amos_page + XPC_ACTIVATE_IRQ_AMOS;
-
-	/* scan through act AMO variable looking for non-zero entries */
-	for (word = 0; word < xp_nasid_mask_words; word++) {
-
-		if (xpc_exiting)
-			break;
-
-		nasid_mask = xpc_IPI_receive(&act_amos[word]);
-		if (nasid_mask == 0) {
-			/* no IRQs from nasids in this variable */
-			continue;
-		}
-
-		dev_dbg(xpc_part, "AMO[%d] gave back 0x%lx\n", word,
-			nasid_mask);
-
-		/*
-		 * If this nasid has been added to the machine since
-		 * our partition was reset, this will retain the
-		 * remote nasid in our reserved pages machine mask.
-		 * This is used in the event of module reload.
-		 */
-		xpc_mach_nasids[word] |= nasid_mask;
-
-		/* locate the nasid(s) which sent interrupts */
+	if (remote_rp->SAL_partid == xp_partition_id)
+		return xpLocalPartid;
 
-		for (bit = 0; bit < (8 * sizeof(u64)); bit++) {
-			if (nasid_mask & (1UL << bit)) {
-				n_IRQs_detected++;
-				nasid = XPC_NASID_FROM_W_B(word, bit);
-				dev_dbg(xpc_part, "interrupt from nasid %ld\n",
-					nasid);
-				xpc_identify_act_IRQ_req(nasid);
-			}
-		}
-	}
-	return n_IRQs_detected;
+	return xpSuccess;
 }
 
 /*
- * See if the other side has responded to a partition disengage request
- * from us.
+ * See if the other side has responded to a partition deactivate request
+ * from us. Though we requested the remote partition to deactivate with regard
+ * to us, we really only need to wait for the other side to disengage from us.
  */
 int
 xpc_partition_disengaged(struct xpc_partition *part)
@@ -828,41 +264,37 @@ xpc_partition_disengaged(struct xpc_partition *part)
 	short partid = XPC_PARTID(part);
 	int disengaged;
 
-	disengaged = (xpc_partition_engaged(1UL << partid) == 0);
-	if (part->disengage_request_timeout) {
+	disengaged = !xpc_partition_engaged(partid);
+	if (part->disengage_timeout) {
 		if (!disengaged) {
-			if (time_before(jiffies,
-			    part->disengage_request_timeout)) {
+			if (time_is_after_jiffies(part->disengage_timeout)) {
 				/* timelimit hasn't been reached yet */
 				return 0;
 			}
 
 			/*
-			 * Other side hasn't responded to our disengage
+			 * Other side hasn't responded to our deactivate
 			 * request in a timely fashion, so assume it's dead.
 			 */
 
-			dev_info(xpc_part, "disengage from remote partition %d "
-				 "timed out\n", partid);
-			xpc_disengage_request_timedout = 1;
-			xpc_clear_partition_engaged(1UL << partid);
+			dev_info(xpc_part, "deactivate request to remote "
+				 "partition %d timed out\n", partid);
+			xpc_disengage_timedout = 1;
+			xpc_assume_partition_disengaged(partid);
 			disengaged = 1;
 		}
-		part->disengage_request_timeout = 0;
+		part->disengage_timeout = 0;
 
 		/* cancel the timer function, provided it's not us */
-		if (!in_interrupt()) {
-			del_singleshot_timer_sync(&part->
-						  disengage_request_timer);
-		}
+		if (!in_interrupt())
+			del_singleshot_timer_sync(&part->disengage_timer);
 
-		DBUG_ON(part->act_state != XPC_P_DEACTIVATING &&
-			part->act_state != XPC_P_INACTIVE);
-		if (part->act_state != XPC_P_INACTIVE)
+		DBUG_ON(part->act_state != XPC_P_AS_DEACTIVATING &&
+			part->act_state != XPC_P_AS_INACTIVE);
+		if (part->act_state != XPC_P_AS_INACTIVE)
 			xpc_wakeup_channel_mgr(part);
 
-		if (XPC_SUPPORTS_DISENGAGE_REQUEST(part->remote_vars_version))
-			xpc_cancel_partition_disengage_request(part);
+		xpc_cancel_partition_deactivation_request(part);
 	}
 	return disengaged;
 }
@@ -879,8 +311,8 @@ xpc_mark_partition_active(struct xpc_partition *part)
 	dev_dbg(xpc_part, "setting partition %d to ACTIVE\n", XPC_PARTID(part));
 
 	spin_lock_irqsave(&part->act_lock, irq_flags);
-	if (part->act_state == XPC_P_ACTIVATING) {
-		part->act_state = XPC_P_ACTIVE;
+	if (part->act_state == XPC_P_AS_ACTIVATING) {
+		part->act_state = XPC_P_AS_ACTIVE;
 		ret = xpSuccess;
 	} else {
 		DBUG_ON(part->reason == xpSuccess);
@@ -892,7 +324,7 @@ xpc_mark_partition_active(struct xpc_partition *part)
 }
 
 /*
- * Notify XPC that the partition is down.
+ * Start the process of deactivating the specified partition.
  */
 void
 xpc_deactivate_partition(const int line, struct xpc_partition *part,
@@ -902,16 +334,16 @@ xpc_deactivate_partition(const int line, struct xpc_partition *part,
 
 	spin_lock_irqsave(&part->act_lock, irq_flags);
 
-	if (part->act_state == XPC_P_INACTIVE) {
+	if (part->act_state == XPC_P_AS_INACTIVE) {
 		XPC_SET_REASON(part, reason, line);
 		spin_unlock_irqrestore(&part->act_lock, irq_flags);
 		if (reason == xpReactivating) {
 			/* we interrupt ourselves to reactivate partition */
-			xpc_IPI_send_reactivate(part);
+			xpc_request_partition_reactivation(part);
 		}
 		return;
 	}
-	if (part->act_state == XPC_P_DEACTIVATING) {
+	if (part->act_state == XPC_P_AS_DEACTIVATING) {
 		if ((part->reason == xpUnloading && reason != xpUnloading) ||
 		    reason == xpReactivating) {
 			XPC_SET_REASON(part, reason, line);
@@ -920,22 +352,18 @@ xpc_deactivate_partition(const int line, struct xpc_partition *part,
 		return;
 	}
 
-	part->act_state = XPC_P_DEACTIVATING;
+	part->act_state = XPC_P_AS_DEACTIVATING;
 	XPC_SET_REASON(part, reason, line);
 
 	spin_unlock_irqrestore(&part->act_lock, irq_flags);
 
-	if (XPC_SUPPORTS_DISENGAGE_REQUEST(part->remote_vars_version)) {
-		xpc_request_partition_disengage(part);
-		xpc_IPI_send_disengage(part);
+	/* ask remote partition to deactivate with regard to us */
+	xpc_request_partition_deactivation(part);
 
-		/* set a timelimit on the disengage request */
-		part->disengage_request_timeout = jiffies +
-		    (xpc_disengage_request_timelimit * HZ);
-		part->disengage_request_timer.expires =
-		    part->disengage_request_timeout;
-		add_timer(&part->disengage_request_timer);
-	}
+	/* set a timelimit on the disengage phase of the deactivation request */
+	part->disengage_timeout = jiffies + (xpc_disengage_timelimit * HZ);
+	part->disengage_timer.expires = part->disengage_timeout;
+	add_timer(&part->disengage_timer);
 
 	dev_dbg(xpc_part, "bringing partition %d down, reason = %d\n",
 		XPC_PARTID(part), reason);
@@ -955,7 +383,7 @@ xpc_mark_partition_inactive(struct xpc_partition *part)
 		XPC_PARTID(part));
 
 	spin_lock_irqsave(&part->act_lock, irq_flags);
-	part->act_state = XPC_P_INACTIVE;
+	part->act_state = XPC_P_AS_INACTIVE;
 	spin_unlock_irqrestore(&part->act_lock, irq_flags);
 	part->remote_rp_pa = 0;
 }
@@ -974,28 +402,22 @@ xpc_discovery(void)
 {
 	void *remote_rp_base;
 	struct xpc_rsvd_page *remote_rp;
-	struct xpc_vars *remote_vars;
-	u64 remote_rp_pa;
-	u64 remote_vars_pa;
+	unsigned long remote_rp_pa;
 	int region;
 	int region_size;
 	int max_regions;
 	int nasid;
 	struct xpc_rsvd_page *rp;
-	short partid;
-	struct xpc_partition *part;
-	u64 *discovered_nasids;
+	unsigned long *discovered_nasids;
 	enum xp_retval ret;
 
 	remote_rp = xpc_kmalloc_cacheline_aligned(XPC_RP_HEADER_SIZE +
-						  xp_nasid_mask_bytes,
+						  xpc_nasid_mask_nbytes,
 						  GFP_KERNEL, &remote_rp_base);
 	if (remote_rp == NULL)
 		return;
 
-	remote_vars = (struct xpc_vars *)remote_rp;
-
-	discovered_nasids = kzalloc(sizeof(u64) * xp_nasid_mask_words,
+	discovered_nasids = kzalloc(sizeof(long) * xpc_nasid_mask_nlongs,
 				    GFP_KERNEL);
 	if (discovered_nasids == NULL) {
 		kfree(remote_rp_base);
@@ -1010,7 +432,7 @@ xpc_discovery(void)
 	 * protection is in regards to memory, IOI and IPI.
 	 */
 	max_regions = 64;
-	region_size = sn_region_size;
+	region_size = xp_region_size;
 
 	switch (region_size) {
 	case 128:
@@ -1038,28 +460,28 @@ xpc_discovery(void)
 
 			dev_dbg(xpc_part, "checking nasid %d\n", nasid);
 
-			if (XPC_NASID_IN_ARRAY(nasid, xpc_part_nasids)) {
+			if (test_bit(nasid / 2, xpc_part_nasids)) {
 				dev_dbg(xpc_part, "PROM indicates Nasid %d is "
 					"part of the local partition; skipping "
 					"region\n", nasid);
 				break;
 			}
 
-			if (!(XPC_NASID_IN_ARRAY(nasid, xpc_mach_nasids))) {
+			if (!(test_bit(nasid / 2, xpc_mach_nasids))) {
 				dev_dbg(xpc_part, "PROM indicates Nasid %d was "
 					"not on Numa-Link network at reset\n",
 					nasid);
 				continue;
 			}
 
-			if (XPC_NASID_IN_ARRAY(nasid, discovered_nasids)) {
+			if (test_bit(nasid / 2, discovered_nasids)) {
 				dev_dbg(xpc_part, "Nasid %d is part of a "
 					"partition which was previously "
 					"discovered\n", nasid);
 				continue;
 			}
 
-			/* pull over the reserved page structure */
+			/* pull over the rsvd page header & part_nasids mask */
 
 			ret = xpc_get_remote_rp(nasid, discovered_nasids,
 						remote_rp, &remote_rp_pa);
@@ -1074,72 +496,8 @@ xpc_discovery(void)
 				continue;
 			}
 
-			remote_vars_pa = remote_rp->vars_pa;
-
-			partid = remote_rp->partid;
-			part = &xpc_partitions[partid];
-
-			/* pull over the cross partition variables */
-
-			ret = xpc_get_remote_vars(remote_vars_pa, remote_vars);
-			if (ret != xpSuccess) {
-				dev_dbg(xpc_part, "unable to get XPC variables "
-					"from nasid %d, reason=%d\n", nasid,
-					ret);
-
-				XPC_DEACTIVATE_PARTITION(part, ret);
-				continue;
-			}
-
-			if (part->act_state != XPC_P_INACTIVE) {
-				dev_dbg(xpc_part, "partition %d on nasid %d is "
-					"already activating\n", partid, nasid);
-				break;
-			}
-
-			/*
-			 * Register the remote partition's AMOs with SAL so it
-			 * can handle and cleanup errors within that address
-			 * range should the remote partition go down. We don't
-			 * unregister this range because it is difficult to
-			 * tell when outstanding writes to the remote partition
-			 * are finished and thus when it is thus safe to
-			 * unregister. This should not result in wasted space
-			 * in the SAL xp_addr_region table because we should
-			 * get the same page for remote_act_amos_pa after
-			 * module reloads and system reboots.
-			 */
-			if (sn_register_xp_addr_region
-			    (remote_vars->amos_page_pa, PAGE_SIZE, 1) < 0) {
-				dev_dbg(xpc_part,
-					"partition %d failed to "
-					"register xp_addr region 0x%016lx\n",
-					partid, remote_vars->amos_page_pa);
-
-				XPC_SET_REASON(part, xpPhysAddrRegFailed,
-					       __LINE__);
-				break;
-			}
-
-			/*
-			 * The remote nasid is valid and available.
-			 * Send an interrupt to that nasid to notify
-			 * it that we are ready to begin activation.
-			 */
-			dev_dbg(xpc_part, "sending an interrupt to AMO 0x%lx, "
-				"nasid %d, phys_cpuid 0x%x\n",
-				remote_vars->amos_page_pa,
-				remote_vars->act_nasid,
-				remote_vars->act_phys_cpuid);
-
-			if (XPC_SUPPORTS_DISENGAGE_REQUEST(remote_vars->
-							   version)) {
-				part->remote_amos_page_pa =
-				    remote_vars->amos_page_pa;
-				xpc_mark_partition_disengaged(part);
-				xpc_cancel_partition_disengage_request(part);
-			}
-			xpc_IPI_send_activate(remote_vars);
+			xpc_request_partition_activation(remote_rp,
+							 remote_rp_pa, nasid);
 		}
 	}
 
@@ -1155,20 +513,16 @@ enum xp_retval
 xpc_initiate_partid_to_nasids(short partid, void *nasid_mask)
 {
 	struct xpc_partition *part;
-	u64 part_nasid_pa;
-	int bte_res;
+	unsigned long part_nasid_pa;
 
 	part = &xpc_partitions[partid];
 	if (part->remote_rp_pa == 0)
 		return xpPartitionDown;
 
-	memset(nasid_mask, 0, XP_NASID_MASK_BYTES);
-
-	part_nasid_pa = (u64)XPC_RP_PART_NASIDS(part->remote_rp_pa);
+	memset(nasid_mask, 0, xpc_nasid_mask_nbytes);
 
-	bte_res = xp_bte_copy(part_nasid_pa, (u64)nasid_mask,
-			      xp_nasid_mask_bytes, (BTE_NOTIFY | BTE_WACQUIRE),
-			      NULL);
+	part_nasid_pa = (unsigned long)XPC_RP_PART_NASIDS(part->remote_rp_pa);
 
-	return xpc_map_bte_errors(bte_res);
+	return xp_remote_memcpy(xp_pa(nasid_mask), part_nasid_pa,
+				xpc_nasid_mask_nbytes);
 }
diff --git a/drivers/misc/sgi-xp/xpc_sn2.c b/drivers/misc/sgi-xp/xpc_sn2.c
new file mode 100644
index 000000000000..b4882ccf6344
--- /dev/null
+++ b/drivers/misc/sgi-xp/xpc_sn2.c
@@ -0,0 +1,2404 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (c) 2008 Silicon Graphics, Inc.  All Rights Reserved.
+ */
+
+/*
+ * Cross Partition Communication (XPC) sn2-based functions.
+ *
+ *     Architecture specific implementation of common functions.
+ *
+ */
+
+#include <linux/delay.h>
+#include <asm/uncached.h>
+#include <asm/sn/mspec.h>
+#include <asm/sn/sn_sal.h>
+#include "xpc.h"
+
+/*
+ * Define the number of u64s required to represent all the C-brick nasids
+ * as a bitmap.  The cross-partition kernel modules deal only with
+ * C-brick nasids, thus the need for bitmaps which don't account for
+ * odd-numbered (non C-brick) nasids.
+ */
+#define XPC_MAX_PHYSNODES_SN2	(MAX_NUMALINK_NODES / 2)
+#define XP_NASID_MASK_BYTES_SN2	((XPC_MAX_PHYSNODES_SN2 + 7) / 8)
+#define XP_NASID_MASK_WORDS_SN2	((XPC_MAX_PHYSNODES_SN2 + 63) / 64)
+
+/*
+ * Memory for XPC's amo variables is allocated by the MSPEC driver. These
+ * pages are located in the lowest granule. The lowest granule uses 4k pages
+ * for cached references and an alternate TLB handler to never provide a
+ * cacheable mapping for the entire region. This will prevent speculative
+ * reading of cached copies of our lines from being issued which will cause
+ * a PI FSB Protocol error to be generated by the SHUB. For XPC, we need 64
+ * amo variables (based on XP_MAX_NPARTITIONS_SN2) to identify the senders of
+ * NOTIFY IRQs, 128 amo variables (based on XP_NASID_MASK_WORDS_SN2) to identify
+ * the senders of ACTIVATE IRQs, 1 amo variable to identify which remote
+ * partitions (i.e., XPCs) consider themselves currently engaged with the
+ * local XPC and 1 amo variable to request partition deactivation.
+ */
+#define XPC_NOTIFY_IRQ_AMOS_SN2		0
+#define XPC_ACTIVATE_IRQ_AMOS_SN2	(XPC_NOTIFY_IRQ_AMOS_SN2 + \
+					 XP_MAX_NPARTITIONS_SN2)
+#define XPC_ENGAGED_PARTITIONS_AMO_SN2	(XPC_ACTIVATE_IRQ_AMOS_SN2 + \
+					 XP_NASID_MASK_WORDS_SN2)
+#define XPC_DEACTIVATE_REQUEST_AMO_SN2	(XPC_ENGAGED_PARTITIONS_AMO_SN2 + 1)
+
+/*
+ * Buffer used to store a local copy of portions of a remote partition's
+ * reserved page (either its header and part_nasids mask, or its vars).
+ */
+static void *xpc_remote_copy_buffer_base_sn2;
+static char *xpc_remote_copy_buffer_sn2;
+
+static struct xpc_vars_sn2 *xpc_vars_sn2;
+static struct xpc_vars_part_sn2 *xpc_vars_part_sn2;
+
+static int
+xpc_setup_partitions_sn_sn2(void)
+{
+	/* nothing needs to be done */
+	return 0;
+}
+
+/* SH_IPI_ACCESS shub register value on startup */
+static u64 xpc_sh1_IPI_access_sn2;
+static u64 xpc_sh2_IPI_access0_sn2;
+static u64 xpc_sh2_IPI_access1_sn2;
+static u64 xpc_sh2_IPI_access2_sn2;
+static u64 xpc_sh2_IPI_access3_sn2;
+
+/*
+ * Change protections to allow IPI operations.
+ */
+static void
+xpc_allow_IPI_ops_sn2(void)
+{
+	int node;
+	int nasid;
+
+	/* !!! The following should get moved into SAL. */
+	if (is_shub2()) {
+		xpc_sh2_IPI_access0_sn2 =
+		    (u64)HUB_L((u64 *)LOCAL_MMR_ADDR(SH2_IPI_ACCESS0));
+		xpc_sh2_IPI_access1_sn2 =
+		    (u64)HUB_L((u64 *)LOCAL_MMR_ADDR(SH2_IPI_ACCESS1));
+		xpc_sh2_IPI_access2_sn2 =
+		    (u64)HUB_L((u64 *)LOCAL_MMR_ADDR(SH2_IPI_ACCESS2));
+		xpc_sh2_IPI_access3_sn2 =
+		    (u64)HUB_L((u64 *)LOCAL_MMR_ADDR(SH2_IPI_ACCESS3));
+
+		for_each_online_node(node) {
+			nasid = cnodeid_to_nasid(node);
+			HUB_S((u64 *)GLOBAL_MMR_ADDR(nasid, SH2_IPI_ACCESS0),
+			      -1UL);
+			HUB_S((u64 *)GLOBAL_MMR_ADDR(nasid, SH2_IPI_ACCESS1),
+			      -1UL);
+			HUB_S((u64 *)GLOBAL_MMR_ADDR(nasid, SH2_IPI_ACCESS2),
+			      -1UL);
+			HUB_S((u64 *)GLOBAL_MMR_ADDR(nasid, SH2_IPI_ACCESS3),
+			      -1UL);
+		}
+	} else {
+		xpc_sh1_IPI_access_sn2 =
+		    (u64)HUB_L((u64 *)LOCAL_MMR_ADDR(SH1_IPI_ACCESS));
+
+		for_each_online_node(node) {
+			nasid = cnodeid_to_nasid(node);
+			HUB_S((u64 *)GLOBAL_MMR_ADDR(nasid, SH1_IPI_ACCESS),
+			      -1UL);
+		}
+	}
+}
+
+/*
+ * Restrict protections to disallow IPI operations.
+ */
+static void
+xpc_disallow_IPI_ops_sn2(void)
+{
+	int node;
+	int nasid;
+
+	/* !!! The following should get moved into SAL. */
+	if (is_shub2()) {
+		for_each_online_node(node) {
+			nasid = cnodeid_to_nasid(node);
+			HUB_S((u64 *)GLOBAL_MMR_ADDR(nasid, SH2_IPI_ACCESS0),
+			      xpc_sh2_IPI_access0_sn2);
+			HUB_S((u64 *)GLOBAL_MMR_ADDR(nasid, SH2_IPI_ACCESS1),
+			      xpc_sh2_IPI_access1_sn2);
+			HUB_S((u64 *)GLOBAL_MMR_ADDR(nasid, SH2_IPI_ACCESS2),
+			      xpc_sh2_IPI_access2_sn2);
+			HUB_S((u64 *)GLOBAL_MMR_ADDR(nasid, SH2_IPI_ACCESS3),
+			      xpc_sh2_IPI_access3_sn2);
+		}
+	} else {
+		for_each_online_node(node) {
+			nasid = cnodeid_to_nasid(node);
+			HUB_S((u64 *)GLOBAL_MMR_ADDR(nasid, SH1_IPI_ACCESS),
+			      xpc_sh1_IPI_access_sn2);
+		}
+	}
+}
+
+/*
+ * The following set of functions are used for the sending and receiving of
+ * IRQs (also known as IPIs). There are two flavors of IRQs, one that is
+ * associated with partition activity (SGI_XPC_ACTIVATE) and the other that
+ * is associated with channel activity (SGI_XPC_NOTIFY).
+ */
+
+static u64
+xpc_receive_IRQ_amo_sn2(struct amo *amo)
+{
+	return FETCHOP_LOAD_OP(TO_AMO((u64)&amo->variable), FETCHOP_CLEAR);
+}
+
+static enum xp_retval
+xpc_send_IRQ_sn2(struct amo *amo, u64 flag, int nasid, int phys_cpuid,
+		 int vector)
+{
+	int ret = 0;
+	unsigned long irq_flags;
+
+	local_irq_save(irq_flags);
+
+	FETCHOP_STORE_OP(TO_AMO((u64)&amo->variable), FETCHOP_OR, flag);
+	sn_send_IPI_phys(nasid, phys_cpuid, vector, 0);
+
+	/*
+	 * We must always use the nofault function regardless of whether we
+	 * are on a Shub 1.1 system or a Shub 1.2 slice 0xc processor. If we
+	 * didn't, we'd never know that the other partition is down and would
+	 * keep sending IRQs and amos to it until the heartbeat times out.
+	 */
+	ret = xp_nofault_PIOR((u64 *)GLOBAL_MMR_ADDR(NASID_GET(&amo->variable),
+						     xp_nofault_PIOR_target));
+
+	local_irq_restore(irq_flags);
+
+	return (ret == 0) ? xpSuccess : xpPioReadError;
+}
+
+static struct amo *
+xpc_init_IRQ_amo_sn2(int index)
+{
+	struct amo *amo = xpc_vars_sn2->amos_page + index;
+
+	(void)xpc_receive_IRQ_amo_sn2(amo);	/* clear amo variable */
+	return amo;
+}
+
+/*
+ * Functions associated with SGI_XPC_ACTIVATE IRQ.
+ */
+
+/*
+ * Notify the heartbeat check thread that an activate IRQ has been received.
+ */
+static irqreturn_t
+xpc_handle_activate_IRQ_sn2(int irq, void *dev_id)
+{
+	unsigned long irq_flags;
+
+	spin_lock_irqsave(&xpc_activate_IRQ_rcvd_lock, irq_flags);
+	xpc_activate_IRQ_rcvd++;
+	spin_unlock_irqrestore(&xpc_activate_IRQ_rcvd_lock, irq_flags);
+
+	wake_up_interruptible(&xpc_activate_IRQ_wq);
+	return IRQ_HANDLED;
+}
+
+/*
+ * Flag the appropriate amo variable and send an IRQ to the specified node.
+ */
+static void
+xpc_send_activate_IRQ_sn2(unsigned long amos_page_pa, int from_nasid,
+			  int to_nasid, int to_phys_cpuid)
+{
+	struct amo *amos = (struct amo *)__va(amos_page_pa +
+					      (XPC_ACTIVATE_IRQ_AMOS_SN2 *
+					      sizeof(struct amo)));
+
+	(void)xpc_send_IRQ_sn2(&amos[BIT_WORD(from_nasid / 2)],
+			       BIT_MASK(from_nasid / 2), to_nasid,
+			       to_phys_cpuid, SGI_XPC_ACTIVATE);
+}
+
+static void
+xpc_send_local_activate_IRQ_sn2(int from_nasid)
+{
+	unsigned long irq_flags;
+	struct amo *amos = (struct amo *)__va(xpc_vars_sn2->amos_page_pa +
+					      (XPC_ACTIVATE_IRQ_AMOS_SN2 *
+					      sizeof(struct amo)));
+
+	/* fake the sending and receipt of an activate IRQ from remote nasid */
+	FETCHOP_STORE_OP(TO_AMO((u64)&amos[BIT_WORD(from_nasid / 2)].variable),
+			 FETCHOP_OR, BIT_MASK(from_nasid / 2));
+
+	spin_lock_irqsave(&xpc_activate_IRQ_rcvd_lock, irq_flags);
+	xpc_activate_IRQ_rcvd++;
+	spin_unlock_irqrestore(&xpc_activate_IRQ_rcvd_lock, irq_flags);
+
+	wake_up_interruptible(&xpc_activate_IRQ_wq);
+}
+
+/*
+ * Functions associated with SGI_XPC_NOTIFY IRQ.
+ */
+
+/*
+ * Check to see if any chctl flags were sent from the specified partition.
+ */
+static void
+xpc_check_for_sent_chctl_flags_sn2(struct xpc_partition *part)
+{
+	union xpc_channel_ctl_flags chctl;
+	unsigned long irq_flags;
+
+	chctl.all_flags = xpc_receive_IRQ_amo_sn2(part->sn.sn2.
+						  local_chctl_amo_va);
+	if (chctl.all_flags == 0)
+		return;
+
+	spin_lock_irqsave(&part->chctl_lock, irq_flags);
+	part->chctl.all_flags |= chctl.all_flags;
+	spin_unlock_irqrestore(&part->chctl_lock, irq_flags);
+
+	dev_dbg(xpc_chan, "received notify IRQ from partid=%d, chctl.all_flags="
+		"0x%lx\n", XPC_PARTID(part), chctl.all_flags);
+
+	xpc_wakeup_channel_mgr(part);
+}
+
+/*
+ * Handle the receipt of a SGI_XPC_NOTIFY IRQ by seeing whether the specified
+ * partition actually sent it. Since SGI_XPC_NOTIFY IRQs may be shared by more
+ * than one partition, we use an amo structure per partition to indicate
+ * whether a partition has sent an IRQ or not.  If it has, then wake up the
+ * associated kthread to handle it.
+ *
+ * All SGI_XPC_NOTIFY IRQs received by XPC are the result of IRQs sent by XPC
+ * running on other partitions.
+ *
+ * Noteworthy Arguments:
+ *
+ *	irq - Interrupt ReQuest number. NOT USED.
+ *
+ *	dev_id - partid of IRQ's potential sender.
+ */
+static irqreturn_t
+xpc_handle_notify_IRQ_sn2(int irq, void *dev_id)
+{
+	short partid = (short)(u64)dev_id;
+	struct xpc_partition *part = &xpc_partitions[partid];
+
+	DBUG_ON(partid < 0 || partid >= XP_MAX_NPARTITIONS_SN2);
+
+	if (xpc_part_ref(part)) {
+		xpc_check_for_sent_chctl_flags_sn2(part);
+
+		xpc_part_deref(part);
+	}
+	return IRQ_HANDLED;
+}
+
+/*
+ * Check to see if xpc_handle_notify_IRQ_sn2() dropped any IRQs on the floor
+ * because the write to their associated amo variable completed after the IRQ
+ * was received.
+ */
+static void
+xpc_check_for_dropped_notify_IRQ_sn2(struct xpc_partition *part)
+{
+	struct xpc_partition_sn2 *part_sn2 = &part->sn.sn2;
+
+	if (xpc_part_ref(part)) {
+		xpc_check_for_sent_chctl_flags_sn2(part);
+
+		part_sn2->dropped_notify_IRQ_timer.expires = jiffies +
+		    XPC_DROPPED_NOTIFY_IRQ_WAIT_INTERVAL;
+		add_timer(&part_sn2->dropped_notify_IRQ_timer);
+		xpc_part_deref(part);
+	}
+}
+
+/*
+ * Send a notify IRQ to the remote partition that is associated with the
+ * specified channel.
+ */
+static void
+xpc_send_notify_IRQ_sn2(struct xpc_channel *ch, u8 chctl_flag,
+			char *chctl_flag_string, unsigned long *irq_flags)
+{
+	struct xpc_partition *part = &xpc_partitions[ch->partid];
+	struct xpc_partition_sn2 *part_sn2 = &part->sn.sn2;
+	union xpc_channel_ctl_flags chctl = { 0 };
+	enum xp_retval ret;
+
+	if (likely(part->act_state != XPC_P_AS_DEACTIVATING)) {
+		chctl.flags[ch->number] = chctl_flag;
+		ret = xpc_send_IRQ_sn2(part_sn2->remote_chctl_amo_va,
+				       chctl.all_flags,
+				       part_sn2->notify_IRQ_nasid,
+				       part_sn2->notify_IRQ_phys_cpuid,
+				       SGI_XPC_NOTIFY);
+		dev_dbg(xpc_chan, "%s sent to partid=%d, channel=%d, ret=%d\n",
+			chctl_flag_string, ch->partid, ch->number, ret);
+		if (unlikely(ret != xpSuccess)) {
+			if (irq_flags != NULL)
+				spin_unlock_irqrestore(&ch->lock, *irq_flags);
+			XPC_DEACTIVATE_PARTITION(part, ret);
+			if (irq_flags != NULL)
+				spin_lock_irqsave(&ch->lock, *irq_flags);
+		}
+	}
+}
+
+#define XPC_SEND_NOTIFY_IRQ_SN2(_ch, _ipi_f, _irq_f) \
+		xpc_send_notify_IRQ_sn2(_ch, _ipi_f, #_ipi_f, _irq_f)
+
+/*
+ * Make it look like the remote partition, which is associated with the
+ * specified channel, sent us a notify IRQ. This faked IRQ will be handled
+ * by xpc_check_for_dropped_notify_IRQ_sn2().
+ */
+static void
+xpc_send_local_notify_IRQ_sn2(struct xpc_channel *ch, u8 chctl_flag,
+			      char *chctl_flag_string)
+{
+	struct xpc_partition *part = &xpc_partitions[ch->partid];
+	union xpc_channel_ctl_flags chctl = { 0 };
+
+	chctl.flags[ch->number] = chctl_flag;
+	FETCHOP_STORE_OP(TO_AMO((u64)&part->sn.sn2.local_chctl_amo_va->
+				variable), FETCHOP_OR, chctl.all_flags);
+	dev_dbg(xpc_chan, "%s sent local from partid=%d, channel=%d\n",
+		chctl_flag_string, ch->partid, ch->number);
+}
+
+#define XPC_SEND_LOCAL_NOTIFY_IRQ_SN2(_ch, _ipi_f) \
+		xpc_send_local_notify_IRQ_sn2(_ch, _ipi_f, #_ipi_f)
+
+static void
+xpc_send_chctl_closerequest_sn2(struct xpc_channel *ch,
+				unsigned long *irq_flags)
+{
+	struct xpc_openclose_args *args = ch->sn.sn2.local_openclose_args;
+
+	args->reason = ch->reason;
+	XPC_SEND_NOTIFY_IRQ_SN2(ch, XPC_CHCTL_CLOSEREQUEST, irq_flags);
+}
+
+static void
+xpc_send_chctl_closereply_sn2(struct xpc_channel *ch, unsigned long *irq_flags)
+{
+	XPC_SEND_NOTIFY_IRQ_SN2(ch, XPC_CHCTL_CLOSEREPLY, irq_flags);
+}
+
+static void
+xpc_send_chctl_openrequest_sn2(struct xpc_channel *ch, unsigned long *irq_flags)
+{
+	struct xpc_openclose_args *args = ch->sn.sn2.local_openclose_args;
+
+	args->entry_size = ch->entry_size;
+	args->local_nentries = ch->local_nentries;
+	XPC_SEND_NOTIFY_IRQ_SN2(ch, XPC_CHCTL_OPENREQUEST, irq_flags);
+}
+
+static void
+xpc_send_chctl_openreply_sn2(struct xpc_channel *ch, unsigned long *irq_flags)
+{
+	struct xpc_openclose_args *args = ch->sn.sn2.local_openclose_args;
+
+	args->remote_nentries = ch->remote_nentries;
+	args->local_nentries = ch->local_nentries;
+	args->local_msgqueue_pa = xp_pa(ch->sn.sn2.local_msgqueue);
+	XPC_SEND_NOTIFY_IRQ_SN2(ch, XPC_CHCTL_OPENREPLY, irq_flags);
+}
+
+static void
+xpc_send_chctl_msgrequest_sn2(struct xpc_channel *ch)
+{
+	XPC_SEND_NOTIFY_IRQ_SN2(ch, XPC_CHCTL_MSGREQUEST, NULL);
+}
+
+static void
+xpc_send_chctl_local_msgrequest_sn2(struct xpc_channel *ch)
+{
+	XPC_SEND_LOCAL_NOTIFY_IRQ_SN2(ch, XPC_CHCTL_MSGREQUEST);
+}
+
+static void
+xpc_save_remote_msgqueue_pa_sn2(struct xpc_channel *ch,
+				unsigned long msgqueue_pa)
+{
+	ch->sn.sn2.remote_msgqueue_pa = msgqueue_pa;
+}
+
+/*
+ * This next set of functions are used to keep track of when a partition is
+ * potentially engaged in accessing memory belonging to another partition.
+ */
+
+static void
+xpc_indicate_partition_engaged_sn2(struct xpc_partition *part)
+{
+	unsigned long irq_flags;
+	struct amo *amo = (struct amo *)__va(part->sn.sn2.remote_amos_page_pa +
+					     (XPC_ENGAGED_PARTITIONS_AMO_SN2 *
+					     sizeof(struct amo)));
+
+	local_irq_save(irq_flags);
+
+	/* set bit corresponding to our partid in remote partition's amo */
+	FETCHOP_STORE_OP(TO_AMO((u64)&amo->variable), FETCHOP_OR,
+			 BIT(sn_partition_id));
+
+	/*
+	 * We must always use the nofault function regardless of whether we
+	 * are on a Shub 1.1 system or a Shub 1.2 slice 0xc processor. If we
+	 * didn't, we'd never know that the other partition is down and would
+	 * keep sending IRQs and amos to it until the heartbeat times out.
+	 */
+	(void)xp_nofault_PIOR((u64 *)GLOBAL_MMR_ADDR(NASID_GET(&amo->
+							       variable),
+						     xp_nofault_PIOR_target));
+
+	local_irq_restore(irq_flags);
+}
+
+static void
+xpc_indicate_partition_disengaged_sn2(struct xpc_partition *part)
+{
+	struct xpc_partition_sn2 *part_sn2 = &part->sn.sn2;
+	unsigned long irq_flags;
+	struct amo *amo = (struct amo *)__va(part_sn2->remote_amos_page_pa +
+					     (XPC_ENGAGED_PARTITIONS_AMO_SN2 *
+					     sizeof(struct amo)));
+
+	local_irq_save(irq_flags);
+
+	/* clear bit corresponding to our partid in remote partition's amo */
+	FETCHOP_STORE_OP(TO_AMO((u64)&amo->variable), FETCHOP_AND,
+			 ~BIT(sn_partition_id));
+
+	/*
+	 * We must always use the nofault function regardless of whether we
+	 * are on a Shub 1.1 system or a Shub 1.2 slice 0xc processor. If we
+	 * didn't, we'd never know that the other partition is down and would
+	 * keep sending IRQs and amos to it until the heartbeat times out.
+	 */
+	(void)xp_nofault_PIOR((u64 *)GLOBAL_MMR_ADDR(NASID_GET(&amo->
+							       variable),
+						     xp_nofault_PIOR_target));
+
+	local_irq_restore(irq_flags);
+
+	/*
+	 * Send activate IRQ to get other side to see that we've cleared our
+	 * bit in their engaged partitions amo.
+	 */
+	xpc_send_activate_IRQ_sn2(part_sn2->remote_amos_page_pa,
+				  cnodeid_to_nasid(0),
+				  part_sn2->activate_IRQ_nasid,
+				  part_sn2->activate_IRQ_phys_cpuid);
+}
+
+static void
+xpc_assume_partition_disengaged_sn2(short partid)
+{
+	struct amo *amo = xpc_vars_sn2->amos_page +
+			  XPC_ENGAGED_PARTITIONS_AMO_SN2;
+
+	/* clear bit(s) based on partid mask in our partition's amo */
+	FETCHOP_STORE_OP(TO_AMO((u64)&amo->variable), FETCHOP_AND,
+			 ~BIT(partid));
+}
+
+static int
+xpc_partition_engaged_sn2(short partid)
+{
+	struct amo *amo = xpc_vars_sn2->amos_page +
+			  XPC_ENGAGED_PARTITIONS_AMO_SN2;
+
+	/* our partition's amo variable ANDed with partid mask */
+	return (FETCHOP_LOAD_OP(TO_AMO((u64)&amo->variable), FETCHOP_LOAD) &
+		BIT(partid)) != 0;
+}
+
+static int
+xpc_any_partition_engaged_sn2(void)
+{
+	struct amo *amo = xpc_vars_sn2->amos_page +
+			  XPC_ENGAGED_PARTITIONS_AMO_SN2;
+
+	/* our partition's amo variable */
+	return FETCHOP_LOAD_OP(TO_AMO((u64)&amo->variable), FETCHOP_LOAD) != 0;
+}
+
+/* original protection values for each node */
+static u64 xpc_prot_vec_sn2[MAX_NUMNODES];
+
+/*
+ * Change protections to allow amo operations on non-Shub 1.1 systems.
+ */
+static enum xp_retval
+xpc_allow_amo_ops_sn2(struct amo *amos_page)
+{
+	u64 nasid_array = 0;
+	int ret;
+
+	/*
+	 * On SHUB 1.1, we cannot call sn_change_memprotect() since the BIST
+	 * collides with memory operations. On those systems we call
+	 * xpc_allow_amo_ops_shub_wars_1_1_sn2() instead.
+	 */
+	if (!enable_shub_wars_1_1()) {
+		ret = sn_change_memprotect(ia64_tpa((u64)amos_page), PAGE_SIZE,
+					   SN_MEMPROT_ACCESS_CLASS_1,
+					   &nasid_array);
+		if (ret != 0)
+			return xpSalError;
+	}
+	return xpSuccess;
+}
+
+/*
+ * Change protections to allow amo operations on Shub 1.1 systems.
+ */
+static void
+xpc_allow_amo_ops_shub_wars_1_1_sn2(void)
+{
+	int node;
+	int nasid;
+
+	if (!enable_shub_wars_1_1())
+		return;
+
+	for_each_online_node(node) {
+		nasid = cnodeid_to_nasid(node);
+		/* save current protection values */
+		xpc_prot_vec_sn2[node] =
+		    (u64)HUB_L((u64 *)GLOBAL_MMR_ADDR(nasid,
+						  SH1_MD_DQLP_MMR_DIR_PRIVEC0));
+		/* open up everything */
+		HUB_S((u64 *)GLOBAL_MMR_ADDR(nasid,
+					     SH1_MD_DQLP_MMR_DIR_PRIVEC0),
+		      -1UL);
+		HUB_S((u64 *)GLOBAL_MMR_ADDR(nasid,
+					     SH1_MD_DQRP_MMR_DIR_PRIVEC0),
+		      -1UL);
+	}
+}
+
+static enum xp_retval
+xpc_get_partition_rsvd_page_pa_sn2(void *buf, u64 *cookie, unsigned long *rp_pa,
+				   size_t *len)
+{
+	s64 status;
+	enum xp_retval ret;
+
+	status = sn_partition_reserved_page_pa((u64)buf, cookie, rp_pa, len);
+	if (status == SALRET_OK)
+		ret = xpSuccess;
+	else if (status == SALRET_MORE_PASSES)
+		ret = xpNeedMoreInfo;
+	else
+		ret = xpSalError;
+
+	return ret;
+}
+
+
+static int
+xpc_setup_rsvd_page_sn_sn2(struct xpc_rsvd_page *rp)
+{
+	struct amo *amos_page;
+	int i;
+	int ret;
+
+	xpc_vars_sn2 = XPC_RP_VARS(rp);
+
+	rp->sn.vars_pa = xp_pa(xpc_vars_sn2);
+
+	/* vars_part array follows immediately after vars */
+	xpc_vars_part_sn2 = (struct xpc_vars_part_sn2 *)((u8 *)XPC_RP_VARS(rp) +
+							 XPC_RP_VARS_SIZE);
+
+	/*
+	 * Before clearing xpc_vars_sn2, see if a page of amos had been
+	 * previously allocated. If not we'll need to allocate one and set
+	 * permissions so that cross-partition amos are allowed.
+	 *
+	 * The allocated amo page needs MCA reporting to remain disabled after
+	 * XPC has unloaded.  To make this work, we keep a copy of the pointer
+	 * to this page (i.e., amos_page) in the struct xpc_vars_sn2 structure,
+	 * which is pointed to by the reserved page, and re-use that saved copy
+	 * on subsequent loads of XPC. This amo page is never freed, and its
+	 * memory protections are never restricted.
+	 */
+	amos_page = xpc_vars_sn2->amos_page;
+	if (amos_page == NULL) {
+		amos_page = (struct amo *)TO_AMO(uncached_alloc_page(0, 1));
+		if (amos_page == NULL) {
+			dev_err(xpc_part, "can't allocate page of amos\n");
+			return -ENOMEM;
+		}
+
+		/*
+		 * Open up amo-R/W to cpu.  This is done on Shub 1.1 systems
+		 * when xpc_allow_amo_ops_shub_wars_1_1_sn2() is called.
+		 */
+		ret = xpc_allow_amo_ops_sn2(amos_page);
+		if (ret != xpSuccess) {
+			dev_err(xpc_part, "can't allow amo operations\n");
+			uncached_free_page(__IA64_UNCACHED_OFFSET |
+					   TO_PHYS((u64)amos_page), 1);
+			return -EPERM;
+		}
+	}
+
+	/* clear xpc_vars_sn2 */
+	memset(xpc_vars_sn2, 0, sizeof(struct xpc_vars_sn2));
+
+	xpc_vars_sn2->version = XPC_V_VERSION;
+	xpc_vars_sn2->activate_IRQ_nasid = cpuid_to_nasid(0);
+	xpc_vars_sn2->activate_IRQ_phys_cpuid = cpu_physical_id(0);
+	xpc_vars_sn2->vars_part_pa = xp_pa(xpc_vars_part_sn2);
+	xpc_vars_sn2->amos_page_pa = ia64_tpa((u64)amos_page);
+	xpc_vars_sn2->amos_page = amos_page;	/* save for next load of XPC */
+
+	/* clear xpc_vars_part_sn2 */
+	memset((u64 *)xpc_vars_part_sn2, 0, sizeof(struct xpc_vars_part_sn2) *
+	       XP_MAX_NPARTITIONS_SN2);
+
+	/* initialize the activate IRQ related amo variables */
+	for (i = 0; i < xpc_nasid_mask_nlongs; i++)
+		(void)xpc_init_IRQ_amo_sn2(XPC_ACTIVATE_IRQ_AMOS_SN2 + i);
+
+	/* initialize the engaged remote partitions related amo variables */
+	(void)xpc_init_IRQ_amo_sn2(XPC_ENGAGED_PARTITIONS_AMO_SN2);
+	(void)xpc_init_IRQ_amo_sn2(XPC_DEACTIVATE_REQUEST_AMO_SN2);
+
+	return 0;
+}
+
+static void
+xpc_increment_heartbeat_sn2(void)
+{
+	xpc_vars_sn2->heartbeat++;
+}
+
+static void
+xpc_offline_heartbeat_sn2(void)
+{
+	xpc_increment_heartbeat_sn2();
+	xpc_vars_sn2->heartbeat_offline = 1;
+}
+
+static void
+xpc_online_heartbeat_sn2(void)
+{
+	xpc_increment_heartbeat_sn2();
+	xpc_vars_sn2->heartbeat_offline = 0;
+}
+
+static void
+xpc_heartbeat_init_sn2(void)
+{
+	DBUG_ON(xpc_vars_sn2 == NULL);
+
+	bitmap_zero(xpc_vars_sn2->heartbeating_to_mask, XP_MAX_NPARTITIONS_SN2);
+	xpc_heartbeating_to_mask = &xpc_vars_sn2->heartbeating_to_mask[0];
+	xpc_online_heartbeat_sn2();
+}
+
+static void
+xpc_heartbeat_exit_sn2(void)
+{
+	xpc_offline_heartbeat_sn2();
+}
+
+static enum xp_retval
+xpc_get_remote_heartbeat_sn2(struct xpc_partition *part)
+{
+	struct xpc_vars_sn2 *remote_vars;
+	enum xp_retval ret;
+
+	remote_vars = (struct xpc_vars_sn2 *)xpc_remote_copy_buffer_sn2;
+
+	/* pull the remote vars structure that contains the heartbeat */
+	ret = xp_remote_memcpy(xp_pa(remote_vars),
+			       part->sn.sn2.remote_vars_pa,
+			       XPC_RP_VARS_SIZE);
+	if (ret != xpSuccess)
+		return ret;
+
+	dev_dbg(xpc_part, "partid=%d, heartbeat=%ld, last_heartbeat=%ld, "
+		"heartbeat_offline=%ld, HB_mask[0]=0x%lx\n", XPC_PARTID(part),
+		remote_vars->heartbeat, part->last_heartbeat,
+		remote_vars->heartbeat_offline,
+		remote_vars->heartbeating_to_mask[0]);
+
+	if ((remote_vars->heartbeat == part->last_heartbeat &&
+	    remote_vars->heartbeat_offline == 0) ||
+	    !xpc_hb_allowed(sn_partition_id,
+			    &remote_vars->heartbeating_to_mask)) {
+		ret = xpNoHeartbeat;
+	} else {
+		part->last_heartbeat = remote_vars->heartbeat;
+	}
+
+	return ret;
+}
+
+/*
+ * Get a copy of the remote partition's XPC variables from the reserved page.
+ *
+ * remote_vars points to a buffer that is cacheline aligned for BTE copies and
+ * assumed to be of size XPC_RP_VARS_SIZE.
+ */
+static enum xp_retval
+xpc_get_remote_vars_sn2(unsigned long remote_vars_pa,
+			struct xpc_vars_sn2 *remote_vars)
+{
+	enum xp_retval ret;
+
+	if (remote_vars_pa == 0)
+		return xpVarsNotSet;
+
+	/* pull over the cross partition variables */
+	ret = xp_remote_memcpy(xp_pa(remote_vars), remote_vars_pa,
+			       XPC_RP_VARS_SIZE);
+	if (ret != xpSuccess)
+		return ret;
+
+	if (XPC_VERSION_MAJOR(remote_vars->version) !=
+	    XPC_VERSION_MAJOR(XPC_V_VERSION)) {
+		return xpBadVersion;
+	}
+
+	return xpSuccess;
+}
+
+static void
+xpc_request_partition_activation_sn2(struct xpc_rsvd_page *remote_rp,
+				     unsigned long remote_rp_pa, int nasid)
+{
+	xpc_send_local_activate_IRQ_sn2(nasid);
+}
+
+static void
+xpc_request_partition_reactivation_sn2(struct xpc_partition *part)
+{
+	xpc_send_local_activate_IRQ_sn2(part->sn.sn2.activate_IRQ_nasid);
+}
+
+static void
+xpc_request_partition_deactivation_sn2(struct xpc_partition *part)
+{
+	struct xpc_partition_sn2 *part_sn2 = &part->sn.sn2;
+	unsigned long irq_flags;
+	struct amo *amo = (struct amo *)__va(part_sn2->remote_amos_page_pa +
+					     (XPC_DEACTIVATE_REQUEST_AMO_SN2 *
+					     sizeof(struct amo)));
+
+	local_irq_save(irq_flags);
+
+	/* set bit corresponding to our partid in remote partition's amo */
+	FETCHOP_STORE_OP(TO_AMO((u64)&amo->variable), FETCHOP_OR,
+			 BIT(sn_partition_id));
+
+	/*
+	 * We must always use the nofault function regardless of whether we
+	 * are on a Shub 1.1 system or a Shub 1.2 slice 0xc processor. If we
+	 * didn't, we'd never know that the other partition is down and would
+	 * keep sending IRQs and amos to it until the heartbeat times out.
+	 */
+	(void)xp_nofault_PIOR((u64 *)GLOBAL_MMR_ADDR(NASID_GET(&amo->
+							       variable),
+						     xp_nofault_PIOR_target));
+
+	local_irq_restore(irq_flags);
+
+	/*
+	 * Send activate IRQ to get other side to see that we've set our
+	 * bit in their deactivate request amo.
+	 */
+	xpc_send_activate_IRQ_sn2(part_sn2->remote_amos_page_pa,
+				  cnodeid_to_nasid(0),
+				  part_sn2->activate_IRQ_nasid,
+				  part_sn2->activate_IRQ_phys_cpuid);
+}
+
+static void
+xpc_cancel_partition_deactivation_request_sn2(struct xpc_partition *part)
+{
+	unsigned long irq_flags;
+	struct amo *amo = (struct amo *)__va(part->sn.sn2.remote_amos_page_pa +
+					     (XPC_DEACTIVATE_REQUEST_AMO_SN2 *
+					     sizeof(struct amo)));
+
+	local_irq_save(irq_flags);
+
+	/* clear bit corresponding to our partid in remote partition's amo */
+	FETCHOP_STORE_OP(TO_AMO((u64)&amo->variable), FETCHOP_AND,
+			 ~BIT(sn_partition_id));
+
+	/*
+	 * We must always use the nofault function regardless of whether we
+	 * are on a Shub 1.1 system or a Shub 1.2 slice 0xc processor. If we
+	 * didn't, we'd never know that the other partition is down and would
+	 * keep sending IRQs and amos to it until the heartbeat times out.
+	 */
+	(void)xp_nofault_PIOR((u64 *)GLOBAL_MMR_ADDR(NASID_GET(&amo->
+							       variable),
+						     xp_nofault_PIOR_target));
+
+	local_irq_restore(irq_flags);
+}
+
+static int
+xpc_partition_deactivation_requested_sn2(short partid)
+{
+	struct amo *amo = xpc_vars_sn2->amos_page +
+			  XPC_DEACTIVATE_REQUEST_AMO_SN2;
+
+	/* our partition's amo variable ANDed with partid mask */
+	return (FETCHOP_LOAD_OP(TO_AMO((u64)&amo->variable), FETCHOP_LOAD) &
+		BIT(partid)) != 0;
+}
+
+/*
+ * Update the remote partition's info.
+ */
+static void
+xpc_update_partition_info_sn2(struct xpc_partition *part, u8 remote_rp_version,
+			      unsigned long *remote_rp_ts_jiffies,
+			      unsigned long remote_rp_pa,
+			      unsigned long remote_vars_pa,
+			      struct xpc_vars_sn2 *remote_vars)
+{
+	struct xpc_partition_sn2 *part_sn2 = &part->sn.sn2;
+
+	part->remote_rp_version = remote_rp_version;
+	dev_dbg(xpc_part, "  remote_rp_version = 0x%016x\n",
+		part->remote_rp_version);
+
+	part->remote_rp_ts_jiffies = *remote_rp_ts_jiffies;
+	dev_dbg(xpc_part, "  remote_rp_ts_jiffies = 0x%016lx\n",
+		part->remote_rp_ts_jiffies);
+
+	part->remote_rp_pa = remote_rp_pa;
+	dev_dbg(xpc_part, "  remote_rp_pa = 0x%016lx\n", part->remote_rp_pa);
+
+	part_sn2->remote_vars_pa = remote_vars_pa;
+	dev_dbg(xpc_part, "  remote_vars_pa = 0x%016lx\n",
+		part_sn2->remote_vars_pa);
+
+	part->last_heartbeat = remote_vars->heartbeat;
+	dev_dbg(xpc_part, "  last_heartbeat = 0x%016lx\n",
+		part->last_heartbeat);
+
+	part_sn2->remote_vars_part_pa = remote_vars->vars_part_pa;
+	dev_dbg(xpc_part, "  remote_vars_part_pa = 0x%016lx\n",
+		part_sn2->remote_vars_part_pa);
+
+	part_sn2->activate_IRQ_nasid = remote_vars->activate_IRQ_nasid;
+	dev_dbg(xpc_part, "  activate_IRQ_nasid = 0x%x\n",
+		part_sn2->activate_IRQ_nasid);
+
+	part_sn2->activate_IRQ_phys_cpuid =
+	    remote_vars->activate_IRQ_phys_cpuid;
+	dev_dbg(xpc_part, "  activate_IRQ_phys_cpuid = 0x%x\n",
+		part_sn2->activate_IRQ_phys_cpuid);
+
+	part_sn2->remote_amos_page_pa = remote_vars->amos_page_pa;
+	dev_dbg(xpc_part, "  remote_amos_page_pa = 0x%lx\n",
+		part_sn2->remote_amos_page_pa);
+
+	part_sn2->remote_vars_version = remote_vars->version;
+	dev_dbg(xpc_part, "  remote_vars_version = 0x%x\n",
+		part_sn2->remote_vars_version);
+}
+
+/*
+ * Prior code has determined the nasid which generated a activate IRQ.
+ * Inspect that nasid to determine if its partition needs to be activated
+ * or deactivated.
+ *
+ * A partition is considered "awaiting activation" if our partition
+ * flags indicate it is not active and it has a heartbeat.  A
+ * partition is considered "awaiting deactivation" if our partition
+ * flags indicate it is active but it has no heartbeat or it is not
+ * sending its heartbeat to us.
+ *
+ * To determine the heartbeat, the remote nasid must have a properly
+ * initialized reserved page.
+ */
+static void
+xpc_identify_activate_IRQ_req_sn2(int nasid)
+{
+	struct xpc_rsvd_page *remote_rp;
+	struct xpc_vars_sn2 *remote_vars;
+	unsigned long remote_rp_pa;
+	unsigned long remote_vars_pa;
+	int remote_rp_version;
+	int reactivate = 0;
+	unsigned long remote_rp_ts_jiffies = 0;
+	short partid;
+	struct xpc_partition *part;
+	struct xpc_partition_sn2 *part_sn2;
+	enum xp_retval ret;
+
+	/* pull over the reserved page structure */
+
+	remote_rp = (struct xpc_rsvd_page *)xpc_remote_copy_buffer_sn2;
+
+	ret = xpc_get_remote_rp(nasid, NULL, remote_rp, &remote_rp_pa);
+	if (ret != xpSuccess) {
+		dev_warn(xpc_part, "unable to get reserved page from nasid %d, "
+			 "which sent interrupt, reason=%d\n", nasid, ret);
+		return;
+	}
+
+	remote_vars_pa = remote_rp->sn.vars_pa;
+	remote_rp_version = remote_rp->version;
+	remote_rp_ts_jiffies = remote_rp->ts_jiffies;
+
+	partid = remote_rp->SAL_partid;
+	part = &xpc_partitions[partid];
+	part_sn2 = &part->sn.sn2;
+
+	/* pull over the cross partition variables */
+
+	remote_vars = (struct xpc_vars_sn2 *)xpc_remote_copy_buffer_sn2;
+
+	ret = xpc_get_remote_vars_sn2(remote_vars_pa, remote_vars);
+	if (ret != xpSuccess) {
+		dev_warn(xpc_part, "unable to get XPC variables from nasid %d, "
+			 "which sent interrupt, reason=%d\n", nasid, ret);
+
+		XPC_DEACTIVATE_PARTITION(part, ret);
+		return;
+	}
+
+	part->activate_IRQ_rcvd++;
+
+	dev_dbg(xpc_part, "partid for nasid %d is %d; IRQs = %d; HB = "
+		"%ld:0x%lx\n", (int)nasid, (int)partid, part->activate_IRQ_rcvd,
+		remote_vars->heartbeat, remote_vars->heartbeating_to_mask[0]);
+
+	if (xpc_partition_disengaged(part) &&
+	    part->act_state == XPC_P_AS_INACTIVE) {
+
+		xpc_update_partition_info_sn2(part, remote_rp_version,
+					      &remote_rp_ts_jiffies,
+					      remote_rp_pa, remote_vars_pa,
+					      remote_vars);
+
+		if (xpc_partition_deactivation_requested_sn2(partid)) {
+			/*
+			 * Other side is waiting on us to deactivate even though
+			 * we already have.
+			 */
+			return;
+		}
+
+		xpc_activate_partition(part);
+		return;
+	}
+
+	DBUG_ON(part->remote_rp_version == 0);
+	DBUG_ON(part_sn2->remote_vars_version == 0);
+
+	if (remote_rp_ts_jiffies != part->remote_rp_ts_jiffies) {
+
+		/* the other side rebooted */
+
+		DBUG_ON(xpc_partition_engaged_sn2(partid));
+		DBUG_ON(xpc_partition_deactivation_requested_sn2(partid));
+
+		xpc_update_partition_info_sn2(part, remote_rp_version,
+					      &remote_rp_ts_jiffies,
+					      remote_rp_pa, remote_vars_pa,
+					      remote_vars);
+		reactivate = 1;
+	}
+
+	if (part->disengage_timeout > 0 && !xpc_partition_disengaged(part)) {
+		/* still waiting on other side to disengage from us */
+		return;
+	}
+
+	if (reactivate)
+		XPC_DEACTIVATE_PARTITION(part, xpReactivating);
+	else if (xpc_partition_deactivation_requested_sn2(partid))
+		XPC_DEACTIVATE_PARTITION(part, xpOtherGoingDown);
+}
+
+/*
+ * Loop through the activation amo variables and process any bits
+ * which are set.  Each bit indicates a nasid sending a partition
+ * activation or deactivation request.
+ *
+ * Return #of IRQs detected.
+ */
+int
+xpc_identify_activate_IRQ_sender_sn2(void)
+{
+	int l;
+	int b;
+	unsigned long nasid_mask_long;
+	u64 nasid;		/* remote nasid */
+	int n_IRQs_detected = 0;
+	struct amo *act_amos;
+
+	act_amos = xpc_vars_sn2->amos_page + XPC_ACTIVATE_IRQ_AMOS_SN2;
+
+	/* scan through activate amo variables looking for non-zero entries */
+	for (l = 0; l < xpc_nasid_mask_nlongs; l++) {
+
+		if (xpc_exiting)
+			break;
+
+		nasid_mask_long = xpc_receive_IRQ_amo_sn2(&act_amos[l]);
+
+		b = find_first_bit(&nasid_mask_long, BITS_PER_LONG);
+		if (b >= BITS_PER_LONG) {
+			/* no IRQs from nasids in this amo variable */
+			continue;
+		}
+
+		dev_dbg(xpc_part, "amo[%d] gave back 0x%lx\n", l,
+			nasid_mask_long);
+
+		/*
+		 * If this nasid has been added to the machine since
+		 * our partition was reset, this will retain the
+		 * remote nasid in our reserved pages machine mask.
+		 * This is used in the event of module reload.
+		 */
+		xpc_mach_nasids[l] |= nasid_mask_long;
+
+		/* locate the nasid(s) which sent interrupts */
+
+		do {
+			n_IRQs_detected++;
+			nasid = (l * BITS_PER_LONG + b) * 2;
+			dev_dbg(xpc_part, "interrupt from nasid %ld\n", nasid);
+			xpc_identify_activate_IRQ_req_sn2(nasid);
+
+			b = find_next_bit(&nasid_mask_long, BITS_PER_LONG,
+					  b + 1);
+		} while (b < BITS_PER_LONG);
+	}
+	return n_IRQs_detected;
+}
+
+static void
+xpc_process_activate_IRQ_rcvd_sn2(void)
+{
+	unsigned long irq_flags;
+	int n_IRQs_expected;
+	int n_IRQs_detected;
+
+	DBUG_ON(xpc_activate_IRQ_rcvd == 0);
+
+	spin_lock_irqsave(&xpc_activate_IRQ_rcvd_lock, irq_flags);
+	n_IRQs_expected = xpc_activate_IRQ_rcvd;
+	xpc_activate_IRQ_rcvd = 0;
+	spin_unlock_irqrestore(&xpc_activate_IRQ_rcvd_lock, irq_flags);
+
+	n_IRQs_detected = xpc_identify_activate_IRQ_sender_sn2();
+	if (n_IRQs_detected < n_IRQs_expected) {
+		/* retry once to help avoid missing amo */
+		(void)xpc_identify_activate_IRQ_sender_sn2();
+	}
+}
+
+/*
+ * Setup the channel structures that are sn2 specific.
+ */
+static enum xp_retval
+xpc_setup_ch_structures_sn_sn2(struct xpc_partition *part)
+{
+	struct xpc_partition_sn2 *part_sn2 = &part->sn.sn2;
+	struct xpc_channel_sn2 *ch_sn2;
+	enum xp_retval retval;
+	int ret;
+	int cpuid;
+	int ch_number;
+	struct timer_list *timer;
+	short partid = XPC_PARTID(part);
+
+	/* allocate all the required GET/PUT values */
+
+	part_sn2->local_GPs =
+	    xpc_kzalloc_cacheline_aligned(XPC_GP_SIZE, GFP_KERNEL,
+					  &part_sn2->local_GPs_base);
+	if (part_sn2->local_GPs == NULL) {
+		dev_err(xpc_chan, "can't get memory for local get/put "
+			"values\n");
+		return xpNoMemory;
+	}
+
+	part_sn2->remote_GPs =
+	    xpc_kzalloc_cacheline_aligned(XPC_GP_SIZE, GFP_KERNEL,
+					  &part_sn2->remote_GPs_base);
+	if (part_sn2->remote_GPs == NULL) {
+		dev_err(xpc_chan, "can't get memory for remote get/put "
+			"values\n");
+		retval = xpNoMemory;
+		goto out_1;
+	}
+
+	part_sn2->remote_GPs_pa = 0;
+
+	/* allocate all the required open and close args */
+
+	part_sn2->local_openclose_args =
+	    xpc_kzalloc_cacheline_aligned(XPC_OPENCLOSE_ARGS_SIZE,
+					  GFP_KERNEL, &part_sn2->
+					  local_openclose_args_base);
+	if (part_sn2->local_openclose_args == NULL) {
+		dev_err(xpc_chan, "can't get memory for local connect args\n");
+		retval = xpNoMemory;
+		goto out_2;
+	}
+
+	part_sn2->remote_openclose_args_pa = 0;
+
+	part_sn2->local_chctl_amo_va = xpc_init_IRQ_amo_sn2(partid);
+
+	part_sn2->notify_IRQ_nasid = 0;
+	part_sn2->notify_IRQ_phys_cpuid = 0;
+	part_sn2->remote_chctl_amo_va = NULL;
+
+	sprintf(part_sn2->notify_IRQ_owner, "xpc%02d", partid);
+	ret = request_irq(SGI_XPC_NOTIFY, xpc_handle_notify_IRQ_sn2,
+			  IRQF_SHARED, part_sn2->notify_IRQ_owner,
+			  (void *)(u64)partid);
+	if (ret != 0) {
+		dev_err(xpc_chan, "can't register NOTIFY IRQ handler, "
+			"errno=%d\n", -ret);
+		retval = xpLackOfResources;
+		goto out_3;
+	}
+
+	/* Setup a timer to check for dropped notify IRQs */
+	timer = &part_sn2->dropped_notify_IRQ_timer;
+	init_timer(timer);
+	timer->function =
+	    (void (*)(unsigned long))xpc_check_for_dropped_notify_IRQ_sn2;
+	timer->data = (unsigned long)part;
+	timer->expires = jiffies + XPC_DROPPED_NOTIFY_IRQ_WAIT_INTERVAL;
+	add_timer(timer);
+
+	for (ch_number = 0; ch_number < part->nchannels; ch_number++) {
+		ch_sn2 = &part->channels[ch_number].sn.sn2;
+
+		ch_sn2->local_GP = &part_sn2->local_GPs[ch_number];
+		ch_sn2->local_openclose_args =
+		    &part_sn2->local_openclose_args[ch_number];
+
+		mutex_init(&ch_sn2->msg_to_pull_mutex);
+	}
+
+	/*
+	 * Setup the per partition specific variables required by the
+	 * remote partition to establish channel connections with us.
+	 *
+	 * The setting of the magic # indicates that these per partition
+	 * specific variables are ready to be used.
+	 */
+	xpc_vars_part_sn2[partid].GPs_pa = xp_pa(part_sn2->local_GPs);
+	xpc_vars_part_sn2[partid].openclose_args_pa =
+	    xp_pa(part_sn2->local_openclose_args);
+	xpc_vars_part_sn2[partid].chctl_amo_pa =
+	    xp_pa(part_sn2->local_chctl_amo_va);
+	cpuid = raw_smp_processor_id();	/* any CPU in this partition will do */
+	xpc_vars_part_sn2[partid].notify_IRQ_nasid = cpuid_to_nasid(cpuid);
+	xpc_vars_part_sn2[partid].notify_IRQ_phys_cpuid =
+	    cpu_physical_id(cpuid);
+	xpc_vars_part_sn2[partid].nchannels = part->nchannels;
+	xpc_vars_part_sn2[partid].magic = XPC_VP_MAGIC1_SN2;
+
+	return xpSuccess;
+
+	/* setup of ch structures failed */
+out_3:
+	kfree(part_sn2->local_openclose_args_base);
+	part_sn2->local_openclose_args = NULL;
+out_2:
+	kfree(part_sn2->remote_GPs_base);
+	part_sn2->remote_GPs = NULL;
+out_1:
+	kfree(part_sn2->local_GPs_base);
+	part_sn2->local_GPs = NULL;
+	return retval;
+}
+
+/*
+ * Teardown the channel structures that are sn2 specific.
+ */
+static void
+xpc_teardown_ch_structures_sn_sn2(struct xpc_partition *part)
+{
+	struct xpc_partition_sn2 *part_sn2 = &part->sn.sn2;
+	short partid = XPC_PARTID(part);
+
+	/*
+	 * Indicate that the variables specific to the remote partition are no
+	 * longer available for its use.
+	 */
+	xpc_vars_part_sn2[partid].magic = 0;
+
+	/* in case we've still got outstanding timers registered... */
+	del_timer_sync(&part_sn2->dropped_notify_IRQ_timer);
+	free_irq(SGI_XPC_NOTIFY, (void *)(u64)partid);
+
+	kfree(part_sn2->local_openclose_args_base);
+	part_sn2->local_openclose_args = NULL;
+	kfree(part_sn2->remote_GPs_base);
+	part_sn2->remote_GPs = NULL;
+	kfree(part_sn2->local_GPs_base);
+	part_sn2->local_GPs = NULL;
+	part_sn2->local_chctl_amo_va = NULL;
+}
+
+/*
+ * Create a wrapper that hides the underlying mechanism for pulling a cacheline
+ * (or multiple cachelines) from a remote partition.
+ *
+ * src_pa must be a cacheline aligned physical address on the remote partition.
+ * dst must be a cacheline aligned virtual address on this partition.
+ * cnt must be cacheline sized
+ */
+/* ??? Replace this function by call to xp_remote_memcpy() or bte_copy()? */
+static enum xp_retval
+xpc_pull_remote_cachelines_sn2(struct xpc_partition *part, void *dst,
+			       const unsigned long src_pa, size_t cnt)
+{
+	enum xp_retval ret;
+
+	DBUG_ON(src_pa != L1_CACHE_ALIGN(src_pa));
+	DBUG_ON((unsigned long)dst != L1_CACHE_ALIGN((unsigned long)dst));
+	DBUG_ON(cnt != L1_CACHE_ALIGN(cnt));
+
+	if (part->act_state == XPC_P_AS_DEACTIVATING)
+		return part->reason;
+
+	ret = xp_remote_memcpy(xp_pa(dst), src_pa, cnt);
+	if (ret != xpSuccess) {
+		dev_dbg(xpc_chan, "xp_remote_memcpy() from partition %d failed,"
+			" ret=%d\n", XPC_PARTID(part), ret);
+	}
+	return ret;
+}
+
+/*
+ * Pull the remote per partition specific variables from the specified
+ * partition.
+ */
+static enum xp_retval
+xpc_pull_remote_vars_part_sn2(struct xpc_partition *part)
+{
+	struct xpc_partition_sn2 *part_sn2 = &part->sn.sn2;
+	u8 buffer[L1_CACHE_BYTES * 2];
+	struct xpc_vars_part_sn2 *pulled_entry_cacheline =
+	    (struct xpc_vars_part_sn2 *)L1_CACHE_ALIGN((u64)buffer);
+	struct xpc_vars_part_sn2 *pulled_entry;
+	unsigned long remote_entry_cacheline_pa;
+	unsigned long remote_entry_pa;
+	short partid = XPC_PARTID(part);
+	enum xp_retval ret;
+
+	/* pull the cacheline that contains the variables we're interested in */
+
+	DBUG_ON(part_sn2->remote_vars_part_pa !=
+		L1_CACHE_ALIGN(part_sn2->remote_vars_part_pa));
+	DBUG_ON(sizeof(struct xpc_vars_part_sn2) != L1_CACHE_BYTES / 2);
+
+	remote_entry_pa = part_sn2->remote_vars_part_pa +
+	    sn_partition_id * sizeof(struct xpc_vars_part_sn2);
+
+	remote_entry_cacheline_pa = (remote_entry_pa & ~(L1_CACHE_BYTES - 1));
+
+	pulled_entry = (struct xpc_vars_part_sn2 *)((u64)pulled_entry_cacheline
+						    + (remote_entry_pa &
+						    (L1_CACHE_BYTES - 1)));
+
+	ret = xpc_pull_remote_cachelines_sn2(part, pulled_entry_cacheline,
+					     remote_entry_cacheline_pa,
+					     L1_CACHE_BYTES);
+	if (ret != xpSuccess) {
+		dev_dbg(xpc_chan, "failed to pull XPC vars_part from "
+			"partition %d, ret=%d\n", partid, ret);
+		return ret;
+	}
+
+	/* see if they've been set up yet */
+
+	if (pulled_entry->magic != XPC_VP_MAGIC1_SN2 &&
+	    pulled_entry->magic != XPC_VP_MAGIC2_SN2) {
+
+		if (pulled_entry->magic != 0) {
+			dev_dbg(xpc_chan, "partition %d's XPC vars_part for "
+				"partition %d has bad magic value (=0x%lx)\n",
+				partid, sn_partition_id, pulled_entry->magic);
+			return xpBadMagic;
+		}
+
+		/* they've not been initialized yet */
+		return xpRetry;
+	}
+
+	if (xpc_vars_part_sn2[partid].magic == XPC_VP_MAGIC1_SN2) {
+
+		/* validate the variables */
+
+		if (pulled_entry->GPs_pa == 0 ||
+		    pulled_entry->openclose_args_pa == 0 ||
+		    pulled_entry->chctl_amo_pa == 0) {
+
+			dev_err(xpc_chan, "partition %d's XPC vars_part for "
+				"partition %d are not valid\n", partid,
+				sn_partition_id);
+			return xpInvalidAddress;
+		}
+
+		/* the variables we imported look to be valid */
+
+		part_sn2->remote_GPs_pa = pulled_entry->GPs_pa;
+		part_sn2->remote_openclose_args_pa =
+		    pulled_entry->openclose_args_pa;
+		part_sn2->remote_chctl_amo_va =
+		    (struct amo *)__va(pulled_entry->chctl_amo_pa);
+		part_sn2->notify_IRQ_nasid = pulled_entry->notify_IRQ_nasid;
+		part_sn2->notify_IRQ_phys_cpuid =
+		    pulled_entry->notify_IRQ_phys_cpuid;
+
+		if (part->nchannels > pulled_entry->nchannels)
+			part->nchannels = pulled_entry->nchannels;
+
+		/* let the other side know that we've pulled their variables */
+
+		xpc_vars_part_sn2[partid].magic = XPC_VP_MAGIC2_SN2;
+	}
+
+	if (pulled_entry->magic == XPC_VP_MAGIC1_SN2)
+		return xpRetry;
+
+	return xpSuccess;
+}
+
+/*
+ * Establish first contact with the remote partititon. This involves pulling
+ * the XPC per partition variables from the remote partition and waiting for
+ * the remote partition to pull ours.
+ */
+static enum xp_retval
+xpc_make_first_contact_sn2(struct xpc_partition *part)
+{
+	struct xpc_partition_sn2 *part_sn2 = &part->sn.sn2;
+	enum xp_retval ret;
+
+	/*
+	 * Register the remote partition's amos with SAL so it can handle
+	 * and cleanup errors within that address range should the remote
+	 * partition go down. We don't unregister this range because it is
+	 * difficult to tell when outstanding writes to the remote partition
+	 * are finished and thus when it is safe to unregister. This should
+	 * not result in wasted space in the SAL xp_addr_region table because
+	 * we should get the same page for remote_amos_page_pa after module
+	 * reloads and system reboots.
+	 */
+	if (sn_register_xp_addr_region(part_sn2->remote_amos_page_pa,
+				       PAGE_SIZE, 1) < 0) {
+		dev_warn(xpc_part, "xpc_activating(%d) failed to register "
+			 "xp_addr region\n", XPC_PARTID(part));
+
+		ret = xpPhysAddrRegFailed;
+		XPC_DEACTIVATE_PARTITION(part, ret);
+		return ret;
+	}
+
+	/*
+	 * Send activate IRQ to get other side to activate if they've not
+	 * already begun to do so.
+	 */
+	xpc_send_activate_IRQ_sn2(part_sn2->remote_amos_page_pa,
+				  cnodeid_to_nasid(0),
+				  part_sn2->activate_IRQ_nasid,
+				  part_sn2->activate_IRQ_phys_cpuid);
+
+	while ((ret = xpc_pull_remote_vars_part_sn2(part)) != xpSuccess) {
+		if (ret != xpRetry) {
+			XPC_DEACTIVATE_PARTITION(part, ret);
+			return ret;
+		}
+
+		dev_dbg(xpc_part, "waiting to make first contact with "
+			"partition %d\n", XPC_PARTID(part));
+
+		/* wait a 1/4 of a second or so */
+		(void)msleep_interruptible(250);
+
+		if (part->act_state == XPC_P_AS_DEACTIVATING)
+			return part->reason;
+	}
+
+	return xpSuccess;
+}
+
+/*
+ * Get the chctl flags and pull the openclose args and/or remote GPs as needed.
+ */
+static u64
+xpc_get_chctl_all_flags_sn2(struct xpc_partition *part)
+{
+	struct xpc_partition_sn2 *part_sn2 = &part->sn.sn2;
+	unsigned long irq_flags;
+	union xpc_channel_ctl_flags chctl;
+	enum xp_retval ret;
+
+	/*
+	 * See if there are any chctl flags to be handled.
+	 */
+
+	spin_lock_irqsave(&part->chctl_lock, irq_flags);
+	chctl = part->chctl;
+	if (chctl.all_flags != 0)
+		part->chctl.all_flags = 0;
+
+	spin_unlock_irqrestore(&part->chctl_lock, irq_flags);
+
+	if (xpc_any_openclose_chctl_flags_set(&chctl)) {
+		ret = xpc_pull_remote_cachelines_sn2(part, part->
+						     remote_openclose_args,
+						     part_sn2->
+						     remote_openclose_args_pa,
+						     XPC_OPENCLOSE_ARGS_SIZE);
+		if (ret != xpSuccess) {
+			XPC_DEACTIVATE_PARTITION(part, ret);
+
+			dev_dbg(xpc_chan, "failed to pull openclose args from "
+				"partition %d, ret=%d\n", XPC_PARTID(part),
+				ret);
+
+			/* don't bother processing chctl flags anymore */
+			chctl.all_flags = 0;
+		}
+	}
+
+	if (xpc_any_msg_chctl_flags_set(&chctl)) {
+		ret = xpc_pull_remote_cachelines_sn2(part, part_sn2->remote_GPs,
+						     part_sn2->remote_GPs_pa,
+						     XPC_GP_SIZE);
+		if (ret != xpSuccess) {
+			XPC_DEACTIVATE_PARTITION(part, ret);
+
+			dev_dbg(xpc_chan, "failed to pull GPs from partition "
+				"%d, ret=%d\n", XPC_PARTID(part), ret);
+
+			/* don't bother processing chctl flags anymore */
+			chctl.all_flags = 0;
+		}
+	}
+
+	return chctl.all_flags;
+}
+
+/*
+ * Allocate the local message queue and the notify queue.
+ */
+static enum xp_retval
+xpc_allocate_local_msgqueue_sn2(struct xpc_channel *ch)
+{
+	struct xpc_channel_sn2 *ch_sn2 = &ch->sn.sn2;
+	unsigned long irq_flags;
+	int nentries;
+	size_t nbytes;
+
+	for (nentries = ch->local_nentries; nentries > 0; nentries--) {
+
+		nbytes = nentries * ch->entry_size;
+		ch_sn2->local_msgqueue =
+		    xpc_kzalloc_cacheline_aligned(nbytes, GFP_KERNEL,
+						  &ch_sn2->local_msgqueue_base);
+		if (ch_sn2->local_msgqueue == NULL)
+			continue;
+
+		nbytes = nentries * sizeof(struct xpc_notify_sn2);
+		ch_sn2->notify_queue = kzalloc(nbytes, GFP_KERNEL);
+		if (ch_sn2->notify_queue == NULL) {
+			kfree(ch_sn2->local_msgqueue_base);
+			ch_sn2->local_msgqueue = NULL;
+			continue;
+		}
+
+		spin_lock_irqsave(&ch->lock, irq_flags);
+		if (nentries < ch->local_nentries) {
+			dev_dbg(xpc_chan, "nentries=%d local_nentries=%d, "
+				"partid=%d, channel=%d\n", nentries,
+				ch->local_nentries, ch->partid, ch->number);
+
+			ch->local_nentries = nentries;
+		}
+		spin_unlock_irqrestore(&ch->lock, irq_flags);
+		return xpSuccess;
+	}
+
+	dev_dbg(xpc_chan, "can't get memory for local message queue and notify "
+		"queue, partid=%d, channel=%d\n", ch->partid, ch->number);
+	return xpNoMemory;
+}
+
+/*
+ * Allocate the cached remote message queue.
+ */
+static enum xp_retval
+xpc_allocate_remote_msgqueue_sn2(struct xpc_channel *ch)
+{
+	struct xpc_channel_sn2 *ch_sn2 = &ch->sn.sn2;
+	unsigned long irq_flags;
+	int nentries;
+	size_t nbytes;
+
+	DBUG_ON(ch->remote_nentries <= 0);
+
+	for (nentries = ch->remote_nentries; nentries > 0; nentries--) {
+
+		nbytes = nentries * ch->entry_size;
+		ch_sn2->remote_msgqueue =
+		    xpc_kzalloc_cacheline_aligned(nbytes, GFP_KERNEL, &ch_sn2->
+						  remote_msgqueue_base);
+		if (ch_sn2->remote_msgqueue == NULL)
+			continue;
+
+		spin_lock_irqsave(&ch->lock, irq_flags);
+		if (nentries < ch->remote_nentries) {
+			dev_dbg(xpc_chan, "nentries=%d remote_nentries=%d, "
+				"partid=%d, channel=%d\n", nentries,
+				ch->remote_nentries, ch->partid, ch->number);
+
+			ch->remote_nentries = nentries;
+		}
+		spin_unlock_irqrestore(&ch->lock, irq_flags);
+		return xpSuccess;
+	}
+
+	dev_dbg(xpc_chan, "can't get memory for cached remote message queue, "
+		"partid=%d, channel=%d\n", ch->partid, ch->number);
+	return xpNoMemory;
+}
+
+/*
+ * Allocate message queues and other stuff associated with a channel.
+ *
+ * Note: Assumes all of the channel sizes are filled in.
+ */
+static enum xp_retval
+xpc_setup_msg_structures_sn2(struct xpc_channel *ch)
+{
+	struct xpc_channel_sn2 *ch_sn2 = &ch->sn.sn2;
+	enum xp_retval ret;
+
+	DBUG_ON(ch->flags & XPC_C_SETUP);
+
+	ret = xpc_allocate_local_msgqueue_sn2(ch);
+	if (ret == xpSuccess) {
+
+		ret = xpc_allocate_remote_msgqueue_sn2(ch);
+		if (ret != xpSuccess) {
+			kfree(ch_sn2->local_msgqueue_base);
+			ch_sn2->local_msgqueue = NULL;
+			kfree(ch_sn2->notify_queue);
+			ch_sn2->notify_queue = NULL;
+		}
+	}
+	return ret;
+}
+
+/*
+ * Free up message queues and other stuff that were allocated for the specified
+ * channel.
+ */
+static void
+xpc_teardown_msg_structures_sn2(struct xpc_channel *ch)
+{
+	struct xpc_channel_sn2 *ch_sn2 = &ch->sn.sn2;
+
+	DBUG_ON(!spin_is_locked(&ch->lock));
+
+	ch_sn2->remote_msgqueue_pa = 0;
+
+	ch_sn2->local_GP->get = 0;
+	ch_sn2->local_GP->put = 0;
+	ch_sn2->remote_GP.get = 0;
+	ch_sn2->remote_GP.put = 0;
+	ch_sn2->w_local_GP.get = 0;
+	ch_sn2->w_local_GP.put = 0;
+	ch_sn2->w_remote_GP.get = 0;
+	ch_sn2->w_remote_GP.put = 0;
+	ch_sn2->next_msg_to_pull = 0;
+
+	if (ch->flags & XPC_C_SETUP) {
+		dev_dbg(xpc_chan, "ch->flags=0x%x, partid=%d, channel=%d\n",
+			ch->flags, ch->partid, ch->number);
+
+		kfree(ch_sn2->local_msgqueue_base);
+		ch_sn2->local_msgqueue = NULL;
+		kfree(ch_sn2->remote_msgqueue_base);
+		ch_sn2->remote_msgqueue = NULL;
+		kfree(ch_sn2->notify_queue);
+		ch_sn2->notify_queue = NULL;
+	}
+}
+
+/*
+ * Notify those who wanted to be notified upon delivery of their message.
+ */
+static void
+xpc_notify_senders_sn2(struct xpc_channel *ch, enum xp_retval reason, s64 put)
+{
+	struct xpc_notify_sn2 *notify;
+	u8 notify_type;
+	s64 get = ch->sn.sn2.w_remote_GP.get - 1;
+
+	while (++get < put && atomic_read(&ch->n_to_notify) > 0) {
+
+		notify = &ch->sn.sn2.notify_queue[get % ch->local_nentries];
+
+		/*
+		 * See if the notify entry indicates it was associated with
+		 * a message who's sender wants to be notified. It is possible
+		 * that it is, but someone else is doing or has done the
+		 * notification.
+		 */
+		notify_type = notify->type;
+		if (notify_type == 0 ||
+		    cmpxchg(&notify->type, notify_type, 0) != notify_type) {
+			continue;
+		}
+
+		DBUG_ON(notify_type != XPC_N_CALL);
+
+		atomic_dec(&ch->n_to_notify);
+
+		if (notify->func != NULL) {
+			dev_dbg(xpc_chan, "notify->func() called, notify=0x%p "
+				"msg_number=%ld partid=%d channel=%d\n",
+				(void *)notify, get, ch->partid, ch->number);
+
+			notify->func(reason, ch->partid, ch->number,
+				     notify->key);
+
+			dev_dbg(xpc_chan, "notify->func() returned, notify=0x%p"
+				" msg_number=%ld partid=%d channel=%d\n",
+				(void *)notify, get, ch->partid, ch->number);
+		}
+	}
+}
+
+static void
+xpc_notify_senders_of_disconnect_sn2(struct xpc_channel *ch)
+{
+	xpc_notify_senders_sn2(ch, ch->reason, ch->sn.sn2.w_local_GP.put);
+}
+
+/*
+ * Clear some of the msg flags in the local message queue.
+ */
+static inline void
+xpc_clear_local_msgqueue_flags_sn2(struct xpc_channel *ch)
+{
+	struct xpc_channel_sn2 *ch_sn2 = &ch->sn.sn2;
+	struct xpc_msg_sn2 *msg;
+	s64 get;
+
+	get = ch_sn2->w_remote_GP.get;
+	do {
+		msg = (struct xpc_msg_sn2 *)((u64)ch_sn2->local_msgqueue +
+					     (get % ch->local_nentries) *
+					     ch->entry_size);
+		msg->flags = 0;
+	} while (++get < ch_sn2->remote_GP.get);
+}
+
+/*
+ * Clear some of the msg flags in the remote message queue.
+ */
+static inline void
+xpc_clear_remote_msgqueue_flags_sn2(struct xpc_channel *ch)
+{
+	struct xpc_channel_sn2 *ch_sn2 = &ch->sn.sn2;
+	struct xpc_msg_sn2 *msg;
+	s64 put;
+
+	put = ch_sn2->w_remote_GP.put;
+	do {
+		msg = (struct xpc_msg_sn2 *)((u64)ch_sn2->remote_msgqueue +
+					     (put % ch->remote_nentries) *
+					     ch->entry_size);
+		msg->flags = 0;
+	} while (++put < ch_sn2->remote_GP.put);
+}
+
+static int
+xpc_n_of_deliverable_payloads_sn2(struct xpc_channel *ch)
+{
+	return ch->sn.sn2.w_remote_GP.put - ch->sn.sn2.w_local_GP.get;
+}
+
+static void
+xpc_process_msg_chctl_flags_sn2(struct xpc_partition *part, int ch_number)
+{
+	struct xpc_channel *ch = &part->channels[ch_number];
+	struct xpc_channel_sn2 *ch_sn2 = &ch->sn.sn2;
+	int npayloads_sent;
+
+	ch_sn2->remote_GP = part->sn.sn2.remote_GPs[ch_number];
+
+	/* See what, if anything, has changed for each connected channel */
+
+	xpc_msgqueue_ref(ch);
+
+	if (ch_sn2->w_remote_GP.get == ch_sn2->remote_GP.get &&
+	    ch_sn2->w_remote_GP.put == ch_sn2->remote_GP.put) {
+		/* nothing changed since GPs were last pulled */
+		xpc_msgqueue_deref(ch);
+		return;
+	}
+
+	if (!(ch->flags & XPC_C_CONNECTED)) {
+		xpc_msgqueue_deref(ch);
+		return;
+	}
+
+	/*
+	 * First check to see if messages recently sent by us have been
+	 * received by the other side. (The remote GET value will have
+	 * changed since we last looked at it.)
+	 */
+
+	if (ch_sn2->w_remote_GP.get != ch_sn2->remote_GP.get) {
+
+		/*
+		 * We need to notify any senders that want to be notified
+		 * that their sent messages have been received by their
+		 * intended recipients. We need to do this before updating
+		 * w_remote_GP.get so that we don't allocate the same message
+		 * queue entries prematurely (see xpc_allocate_msg()).
+		 */
+		if (atomic_read(&ch->n_to_notify) > 0) {
+			/*
+			 * Notify senders that messages sent have been
+			 * received and delivered by the other side.
+			 */
+			xpc_notify_senders_sn2(ch, xpMsgDelivered,
+					       ch_sn2->remote_GP.get);
+		}
+
+		/*
+		 * Clear msg->flags in previously sent messages, so that
+		 * they're ready for xpc_allocate_msg().
+		 */
+		xpc_clear_local_msgqueue_flags_sn2(ch);
+
+		ch_sn2->w_remote_GP.get = ch_sn2->remote_GP.get;
+
+		dev_dbg(xpc_chan, "w_remote_GP.get changed to %ld, partid=%d, "
+			"channel=%d\n", ch_sn2->w_remote_GP.get, ch->partid,
+			ch->number);
+
+		/*
+		 * If anyone was waiting for message queue entries to become
+		 * available, wake them up.
+		 */
+		if (atomic_read(&ch->n_on_msg_allocate_wq) > 0)
+			wake_up(&ch->msg_allocate_wq);
+	}
+
+	/*
+	 * Now check for newly sent messages by the other side. (The remote
+	 * PUT value will have changed since we last looked at it.)
+	 */
+
+	if (ch_sn2->w_remote_GP.put != ch_sn2->remote_GP.put) {
+		/*
+		 * Clear msg->flags in previously received messages, so that
+		 * they're ready for xpc_get_deliverable_payload_sn2().
+		 */
+		xpc_clear_remote_msgqueue_flags_sn2(ch);
+
+		ch_sn2->w_remote_GP.put = ch_sn2->remote_GP.put;
+
+		dev_dbg(xpc_chan, "w_remote_GP.put changed to %ld, partid=%d, "
+			"channel=%d\n", ch_sn2->w_remote_GP.put, ch->partid,
+			ch->number);
+
+		npayloads_sent = xpc_n_of_deliverable_payloads_sn2(ch);
+		if (npayloads_sent > 0) {
+			dev_dbg(xpc_chan, "msgs waiting to be copied and "
+				"delivered=%d, partid=%d, channel=%d\n",
+				npayloads_sent, ch->partid, ch->number);
+
+			if (ch->flags & XPC_C_CONNECTEDCALLOUT_MADE)
+				xpc_activate_kthreads(ch, npayloads_sent);
+		}
+	}
+
+	xpc_msgqueue_deref(ch);
+}
+
+static struct xpc_msg_sn2 *
+xpc_pull_remote_msg_sn2(struct xpc_channel *ch, s64 get)
+{
+	struct xpc_partition *part = &xpc_partitions[ch->partid];
+	struct xpc_channel_sn2 *ch_sn2 = &ch->sn.sn2;
+	unsigned long remote_msg_pa;
+	struct xpc_msg_sn2 *msg;
+	u32 msg_index;
+	u32 nmsgs;
+	u64 msg_offset;
+	enum xp_retval ret;
+
+	if (mutex_lock_interruptible(&ch_sn2->msg_to_pull_mutex) != 0) {
+		/* we were interrupted by a signal */
+		return NULL;
+	}
+
+	while (get >= ch_sn2->next_msg_to_pull) {
+
+		/* pull as many messages as are ready and able to be pulled */
+
+		msg_index = ch_sn2->next_msg_to_pull % ch->remote_nentries;
+
+		DBUG_ON(ch_sn2->next_msg_to_pull >= ch_sn2->w_remote_GP.put);
+		nmsgs = ch_sn2->w_remote_GP.put - ch_sn2->next_msg_to_pull;
+		if (msg_index + nmsgs > ch->remote_nentries) {
+			/* ignore the ones that wrap the msg queue for now */
+			nmsgs = ch->remote_nentries - msg_index;
+		}
+
+		msg_offset = msg_index * ch->entry_size;
+		msg = (struct xpc_msg_sn2 *)((u64)ch_sn2->remote_msgqueue +
+		    msg_offset);
+		remote_msg_pa = ch_sn2->remote_msgqueue_pa + msg_offset;
+
+		ret = xpc_pull_remote_cachelines_sn2(part, msg, remote_msg_pa,
+						     nmsgs * ch->entry_size);
+		if (ret != xpSuccess) {
+
+			dev_dbg(xpc_chan, "failed to pull %d msgs starting with"
+				" msg %ld from partition %d, channel=%d, "
+				"ret=%d\n", nmsgs, ch_sn2->next_msg_to_pull,
+				ch->partid, ch->number, ret);
+
+			XPC_DEACTIVATE_PARTITION(part, ret);
+
+			mutex_unlock(&ch_sn2->msg_to_pull_mutex);
+			return NULL;
+		}
+
+		ch_sn2->next_msg_to_pull += nmsgs;
+	}
+
+	mutex_unlock(&ch_sn2->msg_to_pull_mutex);
+
+	/* return the message we were looking for */
+	msg_offset = (get % ch->remote_nentries) * ch->entry_size;
+	msg = (struct xpc_msg_sn2 *)((u64)ch_sn2->remote_msgqueue + msg_offset);
+
+	return msg;
+}
+
+/*
+ * Get the next deliverable message's payload.
+ */
+static void *
+xpc_get_deliverable_payload_sn2(struct xpc_channel *ch)
+{
+	struct xpc_channel_sn2 *ch_sn2 = &ch->sn.sn2;
+	struct xpc_msg_sn2 *msg;
+	void *payload = NULL;
+	s64 get;
+
+	do {
+		if (ch->flags & XPC_C_DISCONNECTING)
+			break;
+
+		get = ch_sn2->w_local_GP.get;
+		rmb();	/* guarantee that .get loads before .put */
+		if (get == ch_sn2->w_remote_GP.put)
+			break;
+
+		/* There are messages waiting to be pulled and delivered.
+		 * We need to try to secure one for ourselves. We'll do this
+		 * by trying to increment w_local_GP.get and hope that no one
+		 * else beats us to it. If they do, we'll we'll simply have
+		 * to try again for the next one.
+		 */
+
+		if (cmpxchg(&ch_sn2->w_local_GP.get, get, get + 1) == get) {
+			/* we got the entry referenced by get */
+
+			dev_dbg(xpc_chan, "w_local_GP.get changed to %ld, "
+				"partid=%d, channel=%d\n", get + 1,
+				ch->partid, ch->number);
+
+			/* pull the message from the remote partition */
+
+			msg = xpc_pull_remote_msg_sn2(ch, get);
+
+			DBUG_ON(msg != NULL && msg->number != get);
+			DBUG_ON(msg != NULL && (msg->flags & XPC_M_SN2_DONE));
+			DBUG_ON(msg != NULL && !(msg->flags & XPC_M_SN2_READY));
+
+			payload = &msg->payload;
+			break;
+		}
+
+	} while (1);
+
+	return payload;
+}
+
+/*
+ * Now we actually send the messages that are ready to be sent by advancing
+ * the local message queue's Put value and then send a chctl msgrequest to the
+ * recipient partition.
+ */
+static void
+xpc_send_msgs_sn2(struct xpc_channel *ch, s64 initial_put)
+{
+	struct xpc_channel_sn2 *ch_sn2 = &ch->sn.sn2;
+	struct xpc_msg_sn2 *msg;
+	s64 put = initial_put + 1;
+	int send_msgrequest = 0;
+
+	while (1) {
+
+		while (1) {
+			if (put == ch_sn2->w_local_GP.put)
+				break;
+
+			msg = (struct xpc_msg_sn2 *)((u64)ch_sn2->
+						     local_msgqueue + (put %
+						     ch->local_nentries) *
+						     ch->entry_size);
+
+			if (!(msg->flags & XPC_M_SN2_READY))
+				break;
+
+			put++;
+		}
+
+		if (put == initial_put) {
+			/* nothing's changed */
+			break;
+		}
+
+		if (cmpxchg_rel(&ch_sn2->local_GP->put, initial_put, put) !=
+		    initial_put) {
+			/* someone else beat us to it */
+			DBUG_ON(ch_sn2->local_GP->put < initial_put);
+			break;
+		}
+
+		/* we just set the new value of local_GP->put */
+
+		dev_dbg(xpc_chan, "local_GP->put changed to %ld, partid=%d, "
+			"channel=%d\n", put, ch->partid, ch->number);
+
+		send_msgrequest = 1;
+
+		/*
+		 * We need to ensure that the message referenced by
+		 * local_GP->put is not XPC_M_SN2_READY or that local_GP->put
+		 * equals w_local_GP.put, so we'll go have a look.
+		 */
+		initial_put = put;
+	}
+
+	if (send_msgrequest)
+		xpc_send_chctl_msgrequest_sn2(ch);
+}
+
+/*
+ * Allocate an entry for a message from the message queue associated with the
+ * specified channel.
+ */
+static enum xp_retval
+xpc_allocate_msg_sn2(struct xpc_channel *ch, u32 flags,
+		     struct xpc_msg_sn2 **address_of_msg)
+{
+	struct xpc_channel_sn2 *ch_sn2 = &ch->sn.sn2;
+	struct xpc_msg_sn2 *msg;
+	enum xp_retval ret;
+	s64 put;
+
+	/*
+	 * Get the next available message entry from the local message queue.
+	 * If none are available, we'll make sure that we grab the latest
+	 * GP values.
+	 */
+	ret = xpTimeout;
+
+	while (1) {
+
+		put = ch_sn2->w_local_GP.put;
+		rmb();	/* guarantee that .put loads before .get */
+		if (put - ch_sn2->w_remote_GP.get < ch->local_nentries) {
+
+			/* There are available message entries. We need to try
+			 * to secure one for ourselves. We'll do this by trying
+			 * to increment w_local_GP.put as long as someone else
+			 * doesn't beat us to it. If they do, we'll have to
+			 * try again.
+			 */
+			if (cmpxchg(&ch_sn2->w_local_GP.put, put, put + 1) ==
+			    put) {
+				/* we got the entry referenced by put */
+				break;
+			}
+			continue;	/* try again */
+		}
+
+		/*
+		 * There aren't any available msg entries at this time.
+		 *
+		 * In waiting for a message entry to become available,
+		 * we set a timeout in case the other side is not sending
+		 * completion interrupts. This lets us fake a notify IRQ
+		 * that will cause the notify IRQ handler to fetch the latest
+		 * GP values as if an interrupt was sent by the other side.
+		 */
+		if (ret == xpTimeout)
+			xpc_send_chctl_local_msgrequest_sn2(ch);
+
+		if (flags & XPC_NOWAIT)
+			return xpNoWait;
+
+		ret = xpc_allocate_msg_wait(ch);
+		if (ret != xpInterrupted && ret != xpTimeout)
+			return ret;
+	}
+
+	/* get the message's address and initialize it */
+	msg = (struct xpc_msg_sn2 *)((u64)ch_sn2->local_msgqueue +
+				     (put % ch->local_nentries) *
+				     ch->entry_size);
+
+	DBUG_ON(msg->flags != 0);
+	msg->number = put;
+
+	dev_dbg(xpc_chan, "w_local_GP.put changed to %ld; msg=0x%p, "
+		"msg_number=%ld, partid=%d, channel=%d\n", put + 1,
+		(void *)msg, msg->number, ch->partid, ch->number);
+
+	*address_of_msg = msg;
+	return xpSuccess;
+}
+
+/*
+ * Common code that does the actual sending of the message by advancing the
+ * local message queue's Put value and sends a chctl msgrequest to the
+ * partition the message is being sent to.
+ */
+static enum xp_retval
+xpc_send_payload_sn2(struct xpc_channel *ch, u32 flags, void *payload,
+		     u16 payload_size, u8 notify_type, xpc_notify_func func,
+		     void *key)
+{
+	enum xp_retval ret = xpSuccess;
+	struct xpc_channel_sn2 *ch_sn2 = &ch->sn.sn2;
+	struct xpc_msg_sn2 *msg = msg;
+	struct xpc_notify_sn2 *notify = notify;
+	s64 msg_number;
+	s64 put;
+
+	DBUG_ON(notify_type == XPC_N_CALL && func == NULL);
+
+	if (XPC_MSG_SIZE(payload_size) > ch->entry_size)
+		return xpPayloadTooBig;
+
+	xpc_msgqueue_ref(ch);
+
+	if (ch->flags & XPC_C_DISCONNECTING) {
+		ret = ch->reason;
+		goto out_1;
+	}
+	if (!(ch->flags & XPC_C_CONNECTED)) {
+		ret = xpNotConnected;
+		goto out_1;
+	}
+
+	ret = xpc_allocate_msg_sn2(ch, flags, &msg);
+	if (ret != xpSuccess)
+		goto out_1;
+
+	msg_number = msg->number;
+
+	if (notify_type != 0) {
+		/*
+		 * Tell the remote side to send an ACK interrupt when the
+		 * message has been delivered.
+		 */
+		msg->flags |= XPC_M_SN2_INTERRUPT;
+
+		atomic_inc(&ch->n_to_notify);
+
+		notify = &ch_sn2->notify_queue[msg_number % ch->local_nentries];
+		notify->func = func;
+		notify->key = key;
+		notify->type = notify_type;
+
+		/* ??? Is a mb() needed here? */
+
+		if (ch->flags & XPC_C_DISCONNECTING) {
+			/*
+			 * An error occurred between our last error check and
+			 * this one. We will try to clear the type field from
+			 * the notify entry. If we succeed then
+			 * xpc_disconnect_channel() didn't already process
+			 * the notify entry.
+			 */
+			if (cmpxchg(&notify->type, notify_type, 0) ==
+			    notify_type) {
+				atomic_dec(&ch->n_to_notify);
+				ret = ch->reason;
+			}
+			goto out_1;
+		}
+	}
+
+	memcpy(&msg->payload, payload, payload_size);
+
+	msg->flags |= XPC_M_SN2_READY;
+
+	/*
+	 * The preceding store of msg->flags must occur before the following
+	 * load of local_GP->put.
+	 */
+	mb();
+
+	/* see if the message is next in line to be sent, if so send it */
+
+	put = ch_sn2->local_GP->put;
+	if (put == msg_number)
+		xpc_send_msgs_sn2(ch, put);
+
+out_1:
+	xpc_msgqueue_deref(ch);
+	return ret;
+}
+
+/*
+ * Now we actually acknowledge the messages that have been delivered and ack'd
+ * by advancing the cached remote message queue's Get value and if requested
+ * send a chctl msgrequest to the message sender's partition.
+ *
+ * If a message has XPC_M_SN2_INTERRUPT set, send an interrupt to the partition
+ * that sent the message.
+ */
+static void
+xpc_acknowledge_msgs_sn2(struct xpc_channel *ch, s64 initial_get, u8 msg_flags)
+{
+	struct xpc_channel_sn2 *ch_sn2 = &ch->sn.sn2;
+	struct xpc_msg_sn2 *msg;
+	s64 get = initial_get + 1;
+	int send_msgrequest = 0;
+
+	while (1) {
+
+		while (1) {
+			if (get == ch_sn2->w_local_GP.get)
+				break;
+
+			msg = (struct xpc_msg_sn2 *)((u64)ch_sn2->
+						     remote_msgqueue + (get %
+						     ch->remote_nentries) *
+						     ch->entry_size);
+
+			if (!(msg->flags & XPC_M_SN2_DONE))
+				break;
+
+			msg_flags |= msg->flags;
+			get++;
+		}
+
+		if (get == initial_get) {
+			/* nothing's changed */
+			break;
+		}
+
+		if (cmpxchg_rel(&ch_sn2->local_GP->get, initial_get, get) !=
+		    initial_get) {
+			/* someone else beat us to it */
+			DBUG_ON(ch_sn2->local_GP->get <= initial_get);
+			break;
+		}
+
+		/* we just set the new value of local_GP->get */
+
+		dev_dbg(xpc_chan, "local_GP->get changed to %ld, partid=%d, "
+			"channel=%d\n", get, ch->partid, ch->number);
+
+		send_msgrequest = (msg_flags & XPC_M_SN2_INTERRUPT);
+
+		/*
+		 * We need to ensure that the message referenced by
+		 * local_GP->get is not XPC_M_SN2_DONE or that local_GP->get
+		 * equals w_local_GP.get, so we'll go have a look.
+		 */
+		initial_get = get;
+	}
+
+	if (send_msgrequest)
+		xpc_send_chctl_msgrequest_sn2(ch);
+}
+
+static void
+xpc_received_payload_sn2(struct xpc_channel *ch, void *payload)
+{
+	struct xpc_msg_sn2 *msg;
+	s64 msg_number;
+	s64 get;
+
+	msg = container_of(payload, struct xpc_msg_sn2, payload);
+	msg_number = msg->number;
+
+	dev_dbg(xpc_chan, "msg=0x%p, msg_number=%ld, partid=%d, channel=%d\n",
+		(void *)msg, msg_number, ch->partid, ch->number);
+
+	DBUG_ON((((u64)msg - (u64)ch->remote_msgqueue) / ch->entry_size) !=
+		msg_number % ch->remote_nentries);
+	DBUG_ON(msg->flags & XPC_M_SN2_DONE);
+
+	msg->flags |= XPC_M_SN2_DONE;
+
+	/*
+	 * The preceding store of msg->flags must occur before the following
+	 * load of local_GP->get.
+	 */
+	mb();
+
+	/*
+	 * See if this message is next in line to be acknowledged as having
+	 * been delivered.
+	 */
+	get = ch->sn.sn2.local_GP->get;
+	if (get == msg_number)
+		xpc_acknowledge_msgs_sn2(ch, get, msg->flags);
+}
+
+int
+xpc_init_sn2(void)
+{
+	int ret;
+	size_t buf_size;
+
+	xpc_setup_partitions_sn = xpc_setup_partitions_sn_sn2;
+	xpc_get_partition_rsvd_page_pa = xpc_get_partition_rsvd_page_pa_sn2;
+	xpc_setup_rsvd_page_sn = xpc_setup_rsvd_page_sn_sn2;
+	xpc_increment_heartbeat = xpc_increment_heartbeat_sn2;
+	xpc_offline_heartbeat = xpc_offline_heartbeat_sn2;
+	xpc_online_heartbeat = xpc_online_heartbeat_sn2;
+	xpc_heartbeat_init = xpc_heartbeat_init_sn2;
+	xpc_heartbeat_exit = xpc_heartbeat_exit_sn2;
+	xpc_get_remote_heartbeat = xpc_get_remote_heartbeat_sn2;
+
+	xpc_request_partition_activation = xpc_request_partition_activation_sn2;
+	xpc_request_partition_reactivation =
+	    xpc_request_partition_reactivation_sn2;
+	xpc_request_partition_deactivation =
+	    xpc_request_partition_deactivation_sn2;
+	xpc_cancel_partition_deactivation_request =
+	    xpc_cancel_partition_deactivation_request_sn2;
+
+	xpc_process_activate_IRQ_rcvd = xpc_process_activate_IRQ_rcvd_sn2;
+	xpc_setup_ch_structures_sn = xpc_setup_ch_structures_sn_sn2;
+	xpc_teardown_ch_structures_sn = xpc_teardown_ch_structures_sn_sn2;
+	xpc_make_first_contact = xpc_make_first_contact_sn2;
+
+	xpc_get_chctl_all_flags = xpc_get_chctl_all_flags_sn2;
+	xpc_send_chctl_closerequest = xpc_send_chctl_closerequest_sn2;
+	xpc_send_chctl_closereply = xpc_send_chctl_closereply_sn2;
+	xpc_send_chctl_openrequest = xpc_send_chctl_openrequest_sn2;
+	xpc_send_chctl_openreply = xpc_send_chctl_openreply_sn2;
+
+	xpc_save_remote_msgqueue_pa = xpc_save_remote_msgqueue_pa_sn2;
+
+	xpc_setup_msg_structures = xpc_setup_msg_structures_sn2;
+	xpc_teardown_msg_structures = xpc_teardown_msg_structures_sn2;
+
+	xpc_notify_senders_of_disconnect = xpc_notify_senders_of_disconnect_sn2;
+	xpc_process_msg_chctl_flags = xpc_process_msg_chctl_flags_sn2;
+	xpc_n_of_deliverable_payloads = xpc_n_of_deliverable_payloads_sn2;
+	xpc_get_deliverable_payload = xpc_get_deliverable_payload_sn2;
+
+	xpc_indicate_partition_engaged = xpc_indicate_partition_engaged_sn2;
+	xpc_indicate_partition_disengaged =
+	    xpc_indicate_partition_disengaged_sn2;
+	xpc_partition_engaged = xpc_partition_engaged_sn2;
+	xpc_any_partition_engaged = xpc_any_partition_engaged_sn2;
+	xpc_assume_partition_disengaged = xpc_assume_partition_disengaged_sn2;
+
+	xpc_send_payload = xpc_send_payload_sn2;
+	xpc_received_payload = xpc_received_payload_sn2;
+
+	if (offsetof(struct xpc_msg_sn2, payload) > XPC_MSG_HDR_MAX_SIZE) {
+		dev_err(xpc_part, "header portion of struct xpc_msg_sn2 is "
+			"larger than %d\n", XPC_MSG_HDR_MAX_SIZE);
+		return -E2BIG;
+	}
+
+	buf_size = max(XPC_RP_VARS_SIZE,
+		       XPC_RP_HEADER_SIZE + XP_NASID_MASK_BYTES_SN2);
+	xpc_remote_copy_buffer_sn2 = xpc_kmalloc_cacheline_aligned(buf_size,
+								   GFP_KERNEL,
+					      &xpc_remote_copy_buffer_base_sn2);
+	if (xpc_remote_copy_buffer_sn2 == NULL) {
+		dev_err(xpc_part, "can't get memory for remote copy buffer\n");
+		return -ENOMEM;
+	}
+
+	/* open up protections for IPI and [potentially] amo operations */
+	xpc_allow_IPI_ops_sn2();
+	xpc_allow_amo_ops_shub_wars_1_1_sn2();
+
+	/*
+	 * This is safe to do before the xpc_hb_checker thread has started
+	 * because the handler releases a wait queue.  If an interrupt is
+	 * received before the thread is waiting, it will not go to sleep,
+	 * but rather immediately process the interrupt.
+	 */
+	ret = request_irq(SGI_XPC_ACTIVATE, xpc_handle_activate_IRQ_sn2, 0,
+			  "xpc hb", NULL);
+	if (ret != 0) {
+		dev_err(xpc_part, "can't register ACTIVATE IRQ handler, "
+			"errno=%d\n", -ret);
+		xpc_disallow_IPI_ops_sn2();
+		kfree(xpc_remote_copy_buffer_base_sn2);
+	}
+	return ret;
+}
+
+void
+xpc_exit_sn2(void)
+{
+	free_irq(SGI_XPC_ACTIVATE, NULL);
+	xpc_disallow_IPI_ops_sn2();
+	kfree(xpc_remote_copy_buffer_base_sn2);
+}
diff --git a/drivers/misc/sgi-xp/xpc_uv.c b/drivers/misc/sgi-xp/xpc_uv.c
new file mode 100644
index 000000000000..1ac694c01623
--- /dev/null
+++ b/drivers/misc/sgi-xp/xpc_uv.c
@@ -0,0 +1,1443 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (c) 2008 Silicon Graphics, Inc.  All Rights Reserved.
+ */
+
+/*
+ * Cross Partition Communication (XPC) uv-based functions.
+ *
+ *     Architecture specific implementation of common functions.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/mm.h>
+#include <linux/interrupt.h>
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <asm/uv/uv_hub.h>
+#include "../sgi-gru/gru.h"
+#include "../sgi-gru/grukservices.h"
+#include "xpc.h"
+
+static atomic64_t xpc_heartbeat_uv;
+static DECLARE_BITMAP(xpc_heartbeating_to_mask_uv, XP_MAX_NPARTITIONS_UV);
+
+#define XPC_ACTIVATE_MSG_SIZE_UV	(1 * GRU_CACHE_LINE_BYTES)
+#define XPC_NOTIFY_MSG_SIZE_UV		(2 * GRU_CACHE_LINE_BYTES)
+
+#define XPC_ACTIVATE_MQ_SIZE_UV	(4 * XP_MAX_NPARTITIONS_UV * \
+				 XPC_ACTIVATE_MSG_SIZE_UV)
+#define XPC_NOTIFY_MQ_SIZE_UV	(4 * XP_MAX_NPARTITIONS_UV * \
+				 XPC_NOTIFY_MSG_SIZE_UV)
+
+static void *xpc_activate_mq_uv;
+static void *xpc_notify_mq_uv;
+
+static int
+xpc_setup_partitions_sn_uv(void)
+{
+	short partid;
+	struct xpc_partition_uv *part_uv;
+
+	for (partid = 0; partid < XP_MAX_NPARTITIONS_UV; partid++) {
+		part_uv = &xpc_partitions[partid].sn.uv;
+
+		spin_lock_init(&part_uv->flags_lock);
+		part_uv->remote_act_state = XPC_P_AS_INACTIVE;
+	}
+	return 0;
+}
+
+static void *
+xpc_create_gru_mq_uv(unsigned int mq_size, int cpuid, unsigned int irq,
+		     irq_handler_t irq_handler)
+{
+	int ret;
+	int nid;
+	int mq_order;
+	struct page *page;
+	void *mq;
+
+	nid = cpu_to_node(cpuid);
+	mq_order = get_order(mq_size);
+	page = alloc_pages_node(nid, GFP_KERNEL | __GFP_ZERO | GFP_THISNODE,
+				mq_order);
+	if (page == NULL) {
+		dev_err(xpc_part, "xpc_create_gru_mq_uv() failed to alloc %d "
+			"bytes of memory on nid=%d for GRU mq\n", mq_size, nid);
+		return NULL;
+	}
+
+	mq = page_address(page);
+	ret = gru_create_message_queue(mq, mq_size);
+	if (ret != 0) {
+		dev_err(xpc_part, "gru_create_message_queue() returned "
+			"error=%d\n", ret);
+		free_pages((unsigned long)mq, mq_order);
+		return NULL;
+	}
+
+	/* !!! Need to do some other things to set up IRQ */
+
+	ret = request_irq(irq, irq_handler, 0, "xpc", NULL);
+	if (ret != 0) {
+		dev_err(xpc_part, "request_irq(irq=%d) returned error=%d\n",
+			irq, ret);
+		free_pages((unsigned long)mq, mq_order);
+		return NULL;
+	}
+
+	/* !!! enable generation of irq when GRU mq op occurs to this mq */
+
+	/* ??? allow other partitions to access GRU mq? */
+
+	return mq;
+}
+
+static void
+xpc_destroy_gru_mq_uv(void *mq, unsigned int mq_size, unsigned int irq)
+{
+	/* ??? disallow other partitions to access GRU mq? */
+
+	/* !!! disable generation of irq when GRU mq op occurs to this mq */
+
+	free_irq(irq, NULL);
+
+	free_pages((unsigned long)mq, get_order(mq_size));
+}
+
+static enum xp_retval
+xpc_send_gru_msg(unsigned long mq_gpa, void *msg, size_t msg_size)
+{
+	enum xp_retval xp_ret;
+	int ret;
+
+	while (1) {
+		ret = gru_send_message_gpa(mq_gpa, msg, msg_size);
+		if (ret == MQE_OK) {
+			xp_ret = xpSuccess;
+			break;
+		}
+
+		if (ret == MQE_QUEUE_FULL) {
+			dev_dbg(xpc_chan, "gru_send_message_gpa() returned "
+				"error=MQE_QUEUE_FULL\n");
+			/* !!! handle QLimit reached; delay & try again */
+			/* ??? Do we add a limit to the number of retries? */
+			(void)msleep_interruptible(10);
+		} else if (ret == MQE_CONGESTION) {
+			dev_dbg(xpc_chan, "gru_send_message_gpa() returned "
+				"error=MQE_CONGESTION\n");
+			/* !!! handle LB Overflow; simply try again */
+			/* ??? Do we add a limit to the number of retries? */
+		} else {
+			/* !!! Currently this is MQE_UNEXPECTED_CB_ERR */
+			dev_err(xpc_chan, "gru_send_message_gpa() returned "
+				"error=%d\n", ret);
+			xp_ret = xpGruSendMqError;
+			break;
+		}
+	}
+	return xp_ret;
+}
+
+static void
+xpc_process_activate_IRQ_rcvd_uv(void)
+{
+	unsigned long irq_flags;
+	short partid;
+	struct xpc_partition *part;
+	u8 act_state_req;
+
+	DBUG_ON(xpc_activate_IRQ_rcvd == 0);
+
+	spin_lock_irqsave(&xpc_activate_IRQ_rcvd_lock, irq_flags);
+	for (partid = 0; partid < XP_MAX_NPARTITIONS_UV; partid++) {
+		part = &xpc_partitions[partid];
+
+		if (part->sn.uv.act_state_req == 0)
+			continue;
+
+		xpc_activate_IRQ_rcvd--;
+		BUG_ON(xpc_activate_IRQ_rcvd < 0);
+
+		act_state_req = part->sn.uv.act_state_req;
+		part->sn.uv.act_state_req = 0;
+		spin_unlock_irqrestore(&xpc_activate_IRQ_rcvd_lock, irq_flags);
+
+		if (act_state_req == XPC_P_ASR_ACTIVATE_UV) {
+			if (part->act_state == XPC_P_AS_INACTIVE)
+				xpc_activate_partition(part);
+			else if (part->act_state == XPC_P_AS_DEACTIVATING)
+				XPC_DEACTIVATE_PARTITION(part, xpReactivating);
+
+		} else if (act_state_req == XPC_P_ASR_REACTIVATE_UV) {
+			if (part->act_state == XPC_P_AS_INACTIVE)
+				xpc_activate_partition(part);
+			else
+				XPC_DEACTIVATE_PARTITION(part, xpReactivating);
+
+		} else if (act_state_req == XPC_P_ASR_DEACTIVATE_UV) {
+			XPC_DEACTIVATE_PARTITION(part, part->sn.uv.reason);
+
+		} else {
+			BUG();
+		}
+
+		spin_lock_irqsave(&xpc_activate_IRQ_rcvd_lock, irq_flags);
+		if (xpc_activate_IRQ_rcvd == 0)
+			break;
+	}
+	spin_unlock_irqrestore(&xpc_activate_IRQ_rcvd_lock, irq_flags);
+
+}
+
+static void
+xpc_handle_activate_mq_msg_uv(struct xpc_partition *part,
+			      struct xpc_activate_mq_msghdr_uv *msg_hdr,
+			      int *wakeup_hb_checker)
+{
+	unsigned long irq_flags;
+	struct xpc_partition_uv *part_uv = &part->sn.uv;
+	struct xpc_openclose_args *args;
+
+	part_uv->remote_act_state = msg_hdr->act_state;
+
+	switch (msg_hdr->type) {
+	case XPC_ACTIVATE_MQ_MSG_SYNC_ACT_STATE_UV:
+		/* syncing of remote_act_state was just done above */
+		break;
+
+	case XPC_ACTIVATE_MQ_MSG_INC_HEARTBEAT_UV: {
+		struct xpc_activate_mq_msg_heartbeat_req_uv *msg;
+
+		msg = container_of(msg_hdr,
+				   struct xpc_activate_mq_msg_heartbeat_req_uv,
+				   hdr);
+		part_uv->heartbeat = msg->heartbeat;
+		break;
+	}
+	case XPC_ACTIVATE_MQ_MSG_OFFLINE_HEARTBEAT_UV: {
+		struct xpc_activate_mq_msg_heartbeat_req_uv *msg;
+
+		msg = container_of(msg_hdr,
+				   struct xpc_activate_mq_msg_heartbeat_req_uv,
+				   hdr);
+		part_uv->heartbeat = msg->heartbeat;
+
+		spin_lock_irqsave(&part_uv->flags_lock, irq_flags);
+		part_uv->flags |= XPC_P_HEARTBEAT_OFFLINE_UV;
+		spin_unlock_irqrestore(&part_uv->flags_lock, irq_flags);
+		break;
+	}
+	case XPC_ACTIVATE_MQ_MSG_ONLINE_HEARTBEAT_UV: {
+		struct xpc_activate_mq_msg_heartbeat_req_uv *msg;
+
+		msg = container_of(msg_hdr,
+				   struct xpc_activate_mq_msg_heartbeat_req_uv,
+				   hdr);
+		part_uv->heartbeat = msg->heartbeat;
+
+		spin_lock_irqsave(&part_uv->flags_lock, irq_flags);
+		part_uv->flags &= ~XPC_P_HEARTBEAT_OFFLINE_UV;
+		spin_unlock_irqrestore(&part_uv->flags_lock, irq_flags);
+		break;
+	}
+	case XPC_ACTIVATE_MQ_MSG_ACTIVATE_REQ_UV: {
+		struct xpc_activate_mq_msg_activate_req_uv *msg;
+
+		/*
+		 * ??? Do we deal here with ts_jiffies being different
+		 * ??? if act_state != XPC_P_AS_INACTIVE instead of
+		 * ??? below?
+		 */
+		msg = container_of(msg_hdr, struct
+				   xpc_activate_mq_msg_activate_req_uv, hdr);
+
+		spin_lock_irqsave(&xpc_activate_IRQ_rcvd_lock, irq_flags);
+		if (part_uv->act_state_req == 0)
+			xpc_activate_IRQ_rcvd++;
+		part_uv->act_state_req = XPC_P_ASR_ACTIVATE_UV;
+		part->remote_rp_pa = msg->rp_gpa; /* !!! _pa is _gpa */
+		part->remote_rp_ts_jiffies = msg_hdr->rp_ts_jiffies;
+		part_uv->remote_activate_mq_gpa = msg->activate_mq_gpa;
+		spin_unlock_irqrestore(&xpc_activate_IRQ_rcvd_lock, irq_flags);
+
+		(*wakeup_hb_checker)++;
+		break;
+	}
+	case XPC_ACTIVATE_MQ_MSG_DEACTIVATE_REQ_UV: {
+		struct xpc_activate_mq_msg_deactivate_req_uv *msg;
+
+		msg = container_of(msg_hdr, struct
+				   xpc_activate_mq_msg_deactivate_req_uv, hdr);
+
+		spin_lock_irqsave(&xpc_activate_IRQ_rcvd_lock, irq_flags);
+		if (part_uv->act_state_req == 0)
+			xpc_activate_IRQ_rcvd++;
+		part_uv->act_state_req = XPC_P_ASR_DEACTIVATE_UV;
+		part_uv->reason = msg->reason;
+		spin_unlock_irqrestore(&xpc_activate_IRQ_rcvd_lock, irq_flags);
+
+		(*wakeup_hb_checker)++;
+		return;
+	}
+	case XPC_ACTIVATE_MQ_MSG_CHCTL_CLOSEREQUEST_UV: {
+		struct xpc_activate_mq_msg_chctl_closerequest_uv *msg;
+
+		msg = container_of(msg_hdr, struct
+				   xpc_activate_mq_msg_chctl_closerequest_uv,
+				   hdr);
+		args = &part->remote_openclose_args[msg->ch_number];
+		args->reason = msg->reason;
+
+		spin_lock_irqsave(&part->chctl_lock, irq_flags);
+		part->chctl.flags[msg->ch_number] |= XPC_CHCTL_CLOSEREQUEST;
+		spin_unlock_irqrestore(&part->chctl_lock, irq_flags);
+
+		xpc_wakeup_channel_mgr(part);
+		break;
+	}
+	case XPC_ACTIVATE_MQ_MSG_CHCTL_CLOSEREPLY_UV: {
+		struct xpc_activate_mq_msg_chctl_closereply_uv *msg;
+
+		msg = container_of(msg_hdr, struct
+				   xpc_activate_mq_msg_chctl_closereply_uv,
+				   hdr);
+
+		spin_lock_irqsave(&part->chctl_lock, irq_flags);
+		part->chctl.flags[msg->ch_number] |= XPC_CHCTL_CLOSEREPLY;
+		spin_unlock_irqrestore(&part->chctl_lock, irq_flags);
+
+		xpc_wakeup_channel_mgr(part);
+		break;
+	}
+	case XPC_ACTIVATE_MQ_MSG_CHCTL_OPENREQUEST_UV: {
+		struct xpc_activate_mq_msg_chctl_openrequest_uv *msg;
+
+		msg = container_of(msg_hdr, struct
+				   xpc_activate_mq_msg_chctl_openrequest_uv,
+				   hdr);
+		args = &part->remote_openclose_args[msg->ch_number];
+		args->entry_size = msg->entry_size;
+		args->local_nentries = msg->local_nentries;
+
+		spin_lock_irqsave(&part->chctl_lock, irq_flags);
+		part->chctl.flags[msg->ch_number] |= XPC_CHCTL_OPENREQUEST;
+		spin_unlock_irqrestore(&part->chctl_lock, irq_flags);
+
+		xpc_wakeup_channel_mgr(part);
+		break;
+	}
+	case XPC_ACTIVATE_MQ_MSG_CHCTL_OPENREPLY_UV: {
+		struct xpc_activate_mq_msg_chctl_openreply_uv *msg;
+
+		msg = container_of(msg_hdr, struct
+				   xpc_activate_mq_msg_chctl_openreply_uv, hdr);
+		args = &part->remote_openclose_args[msg->ch_number];
+		args->remote_nentries = msg->remote_nentries;
+		args->local_nentries = msg->local_nentries;
+		args->local_msgqueue_pa = msg->local_notify_mq_gpa;
+
+		spin_lock_irqsave(&part->chctl_lock, irq_flags);
+		part->chctl.flags[msg->ch_number] |= XPC_CHCTL_OPENREPLY;
+		spin_unlock_irqrestore(&part->chctl_lock, irq_flags);
+
+		xpc_wakeup_channel_mgr(part);
+		break;
+	}
+	case XPC_ACTIVATE_MQ_MSG_MARK_ENGAGED_UV:
+		spin_lock_irqsave(&part_uv->flags_lock, irq_flags);
+		part_uv->flags |= XPC_P_ENGAGED_UV;
+		spin_unlock_irqrestore(&part_uv->flags_lock, irq_flags);
+		break;
+
+	case XPC_ACTIVATE_MQ_MSG_MARK_DISENGAGED_UV:
+		spin_lock_irqsave(&part_uv->flags_lock, irq_flags);
+		part_uv->flags &= ~XPC_P_ENGAGED_UV;
+		spin_unlock_irqrestore(&part_uv->flags_lock, irq_flags);
+		break;
+
+	default:
+		dev_err(xpc_part, "received unknown activate_mq msg type=%d "
+			"from partition=%d\n", msg_hdr->type, XPC_PARTID(part));
+
+		/* get hb checker to deactivate from the remote partition */
+		spin_lock_irqsave(&xpc_activate_IRQ_rcvd_lock, irq_flags);
+		if (part_uv->act_state_req == 0)
+			xpc_activate_IRQ_rcvd++;
+		part_uv->act_state_req = XPC_P_ASR_DEACTIVATE_UV;
+		part_uv->reason = xpBadMsgType;
+		spin_unlock_irqrestore(&xpc_activate_IRQ_rcvd_lock, irq_flags);
+
+		(*wakeup_hb_checker)++;
+		return;
+	}
+
+	if (msg_hdr->rp_ts_jiffies != part->remote_rp_ts_jiffies &&
+	    part->remote_rp_ts_jiffies != 0) {
+		/*
+		 * ??? Does what we do here need to be sensitive to
+		 * ??? act_state or remote_act_state?
+		 */
+		spin_lock_irqsave(&xpc_activate_IRQ_rcvd_lock, irq_flags);
+		if (part_uv->act_state_req == 0)
+			xpc_activate_IRQ_rcvd++;
+		part_uv->act_state_req = XPC_P_ASR_REACTIVATE_UV;
+		spin_unlock_irqrestore(&xpc_activate_IRQ_rcvd_lock, irq_flags);
+
+		(*wakeup_hb_checker)++;
+	}
+}
+
+static irqreturn_t
+xpc_handle_activate_IRQ_uv(int irq, void *dev_id)
+{
+	struct xpc_activate_mq_msghdr_uv *msg_hdr;
+	short partid;
+	struct xpc_partition *part;
+	int wakeup_hb_checker = 0;
+
+	while ((msg_hdr = gru_get_next_message(xpc_activate_mq_uv)) != NULL) {
+
+		partid = msg_hdr->partid;
+		if (partid < 0 || partid >= XP_MAX_NPARTITIONS_UV) {
+			dev_err(xpc_part, "xpc_handle_activate_IRQ_uv() "
+				"received invalid partid=0x%x in message\n",
+				partid);
+		} else {
+			part = &xpc_partitions[partid];
+			if (xpc_part_ref(part)) {
+				xpc_handle_activate_mq_msg_uv(part, msg_hdr,
+							    &wakeup_hb_checker);
+				xpc_part_deref(part);
+			}
+		}
+
+		gru_free_message(xpc_activate_mq_uv, msg_hdr);
+	}
+
+	if (wakeup_hb_checker)
+		wake_up_interruptible(&xpc_activate_IRQ_wq);
+
+	return IRQ_HANDLED;
+}
+
+static enum xp_retval
+xpc_send_activate_IRQ_uv(struct xpc_partition *part, void *msg, size_t msg_size,
+			 int msg_type)
+{
+	struct xpc_activate_mq_msghdr_uv *msg_hdr = msg;
+
+	DBUG_ON(msg_size > XPC_ACTIVATE_MSG_SIZE_UV);
+
+	msg_hdr->type = msg_type;
+	msg_hdr->partid = XPC_PARTID(part);
+	msg_hdr->act_state = part->act_state;
+	msg_hdr->rp_ts_jiffies = xpc_rsvd_page->ts_jiffies;
+
+	/* ??? Is holding a spin_lock (ch->lock) during this call a bad idea? */
+	return xpc_send_gru_msg(part->sn.uv.remote_activate_mq_gpa, msg,
+				msg_size);
+}
+
+static void
+xpc_send_activate_IRQ_part_uv(struct xpc_partition *part, void *msg,
+			      size_t msg_size, int msg_type)
+{
+	enum xp_retval ret;
+
+	ret = xpc_send_activate_IRQ_uv(part, msg, msg_size, msg_type);
+	if (unlikely(ret != xpSuccess))
+		XPC_DEACTIVATE_PARTITION(part, ret);
+}
+
+static void
+xpc_send_activate_IRQ_ch_uv(struct xpc_channel *ch, unsigned long *irq_flags,
+			 void *msg, size_t msg_size, int msg_type)
+{
+	struct xpc_partition *part = &xpc_partitions[ch->number];
+	enum xp_retval ret;
+
+	ret = xpc_send_activate_IRQ_uv(part, msg, msg_size, msg_type);
+	if (unlikely(ret != xpSuccess)) {
+		if (irq_flags != NULL)
+			spin_unlock_irqrestore(&ch->lock, *irq_flags);
+
+		XPC_DEACTIVATE_PARTITION(part, ret);
+
+		if (irq_flags != NULL)
+			spin_lock_irqsave(&ch->lock, *irq_flags);
+	}
+}
+
+static void
+xpc_send_local_activate_IRQ_uv(struct xpc_partition *part, int act_state_req)
+{
+	unsigned long irq_flags;
+	struct xpc_partition_uv *part_uv = &part->sn.uv;
+
+	/*
+	 * !!! Make our side think that the remote parition sent an activate
+	 * !!! message our way by doing what the activate IRQ handler would
+	 * !!! do had one really been sent.
+	 */
+
+	spin_lock_irqsave(&xpc_activate_IRQ_rcvd_lock, irq_flags);
+	if (part_uv->act_state_req == 0)
+		xpc_activate_IRQ_rcvd++;
+	part_uv->act_state_req = act_state_req;
+	spin_unlock_irqrestore(&xpc_activate_IRQ_rcvd_lock, irq_flags);
+
+	wake_up_interruptible(&xpc_activate_IRQ_wq);
+}
+
+static enum xp_retval
+xpc_get_partition_rsvd_page_pa_uv(void *buf, u64 *cookie, unsigned long *rp_pa,
+				  size_t *len)
+{
+	/* !!! call the UV version of sn_partition_reserved_page_pa() */
+	return xpUnsupported;
+}
+
+static int
+xpc_setup_rsvd_page_sn_uv(struct xpc_rsvd_page *rp)
+{
+	rp->sn.activate_mq_gpa = uv_gpa(xpc_activate_mq_uv);
+	return 0;
+}
+
+static void
+xpc_send_heartbeat_uv(int msg_type)
+{
+	short partid;
+	struct xpc_partition *part;
+	struct xpc_activate_mq_msg_heartbeat_req_uv msg;
+
+	/*
+	 * !!! On uv we're broadcasting a heartbeat message every 5 seconds.
+	 * !!! Whereas on sn2 we're bte_copy'ng the heartbeat info every 20
+	 * !!! seconds. This is an increase in numalink traffic.
+	 * ??? Is this good?
+	 */
+
+	msg.heartbeat = atomic64_inc_return(&xpc_heartbeat_uv);
+
+	partid = find_first_bit(xpc_heartbeating_to_mask_uv,
+				XP_MAX_NPARTITIONS_UV);
+
+	while (partid < XP_MAX_NPARTITIONS_UV) {
+		part = &xpc_partitions[partid];
+
+		xpc_send_activate_IRQ_part_uv(part, &msg, sizeof(msg),
+					      msg_type);
+
+		partid = find_next_bit(xpc_heartbeating_to_mask_uv,
+				       XP_MAX_NPARTITIONS_UV, partid + 1);
+	}
+}
+
+static void
+xpc_increment_heartbeat_uv(void)
+{
+	xpc_send_heartbeat_uv(XPC_ACTIVATE_MQ_MSG_INC_HEARTBEAT_UV);
+}
+
+static void
+xpc_offline_heartbeat_uv(void)
+{
+	xpc_send_heartbeat_uv(XPC_ACTIVATE_MQ_MSG_OFFLINE_HEARTBEAT_UV);
+}
+
+static void
+xpc_online_heartbeat_uv(void)
+{
+	xpc_send_heartbeat_uv(XPC_ACTIVATE_MQ_MSG_ONLINE_HEARTBEAT_UV);
+}
+
+static void
+xpc_heartbeat_init_uv(void)
+{
+	atomic64_set(&xpc_heartbeat_uv, 0);
+	bitmap_zero(xpc_heartbeating_to_mask_uv, XP_MAX_NPARTITIONS_UV);
+	xpc_heartbeating_to_mask = &xpc_heartbeating_to_mask_uv[0];
+}
+
+static void
+xpc_heartbeat_exit_uv(void)
+{
+	xpc_send_heartbeat_uv(XPC_ACTIVATE_MQ_MSG_OFFLINE_HEARTBEAT_UV);
+}
+
+static enum xp_retval
+xpc_get_remote_heartbeat_uv(struct xpc_partition *part)
+{
+	struct xpc_partition_uv *part_uv = &part->sn.uv;
+	enum xp_retval ret = xpNoHeartbeat;
+
+	if (part_uv->remote_act_state != XPC_P_AS_INACTIVE &&
+	    part_uv->remote_act_state != XPC_P_AS_DEACTIVATING) {
+
+		if (part_uv->heartbeat != part->last_heartbeat ||
+		    (part_uv->flags & XPC_P_HEARTBEAT_OFFLINE_UV)) {
+
+			part->last_heartbeat = part_uv->heartbeat;
+			ret = xpSuccess;
+		}
+	}
+	return ret;
+}
+
+static void
+xpc_request_partition_activation_uv(struct xpc_rsvd_page *remote_rp,
+				    unsigned long remote_rp_gpa, int nasid)
+{
+	short partid = remote_rp->SAL_partid;
+	struct xpc_partition *part = &xpc_partitions[partid];
+	struct xpc_activate_mq_msg_activate_req_uv msg;
+
+	part->remote_rp_pa = remote_rp_gpa; /* !!! _pa here is really _gpa */
+	part->remote_rp_ts_jiffies = remote_rp->ts_jiffies;
+	part->sn.uv.remote_activate_mq_gpa = remote_rp->sn.activate_mq_gpa;
+
+	/*
+	 * ??? Is it a good idea to make this conditional on what is
+	 * ??? potentially stale state information?
+	 */
+	if (part->sn.uv.remote_act_state == XPC_P_AS_INACTIVE) {
+		msg.rp_gpa = uv_gpa(xpc_rsvd_page);
+		msg.activate_mq_gpa = xpc_rsvd_page->sn.activate_mq_gpa;
+		xpc_send_activate_IRQ_part_uv(part, &msg, sizeof(msg),
+					   XPC_ACTIVATE_MQ_MSG_ACTIVATE_REQ_UV);
+	}
+
+	if (part->act_state == XPC_P_AS_INACTIVE)
+		xpc_send_local_activate_IRQ_uv(part, XPC_P_ASR_ACTIVATE_UV);
+}
+
+static void
+xpc_request_partition_reactivation_uv(struct xpc_partition *part)
+{
+	xpc_send_local_activate_IRQ_uv(part, XPC_P_ASR_ACTIVATE_UV);
+}
+
+static void
+xpc_request_partition_deactivation_uv(struct xpc_partition *part)
+{
+	struct xpc_activate_mq_msg_deactivate_req_uv msg;
+
+	/*
+	 * ??? Is it a good idea to make this conditional on what is
+	 * ??? potentially stale state information?
+	 */
+	if (part->sn.uv.remote_act_state != XPC_P_AS_DEACTIVATING &&
+	    part->sn.uv.remote_act_state != XPC_P_AS_INACTIVE) {
+
+		msg.reason = part->reason;
+		xpc_send_activate_IRQ_part_uv(part, &msg, sizeof(msg),
+					 XPC_ACTIVATE_MQ_MSG_DEACTIVATE_REQ_UV);
+	}
+}
+
+static void
+xpc_cancel_partition_deactivation_request_uv(struct xpc_partition *part)
+{
+	/* nothing needs to be done */
+	return;
+}
+
+static void
+xpc_init_fifo_uv(struct xpc_fifo_head_uv *head)
+{
+	head->first = NULL;
+	head->last = NULL;
+	spin_lock_init(&head->lock);
+	head->n_entries = 0;
+}
+
+static void *
+xpc_get_fifo_entry_uv(struct xpc_fifo_head_uv *head)
+{
+	unsigned long irq_flags;
+	struct xpc_fifo_entry_uv *first;
+
+	spin_lock_irqsave(&head->lock, irq_flags);
+	first = head->first;
+	if (head->first != NULL) {
+		head->first = first->next;
+		if (head->first == NULL)
+			head->last = NULL;
+	}
+	head->n_entries++;
+	spin_unlock_irqrestore(&head->lock, irq_flags);
+	first->next = NULL;
+	return first;
+}
+
+static void
+xpc_put_fifo_entry_uv(struct xpc_fifo_head_uv *head,
+		      struct xpc_fifo_entry_uv *last)
+{
+	unsigned long irq_flags;
+
+	last->next = NULL;
+	spin_lock_irqsave(&head->lock, irq_flags);
+	if (head->last != NULL)
+		head->last->next = last;
+	else
+		head->first = last;
+	head->last = last;
+	head->n_entries--;
+	BUG_ON(head->n_entries < 0);
+	spin_unlock_irqrestore(&head->lock, irq_flags);
+}
+
+static int
+xpc_n_of_fifo_entries_uv(struct xpc_fifo_head_uv *head)
+{
+	return head->n_entries;
+}
+
+/*
+ * Setup the channel structures that are uv specific.
+ */
+static enum xp_retval
+xpc_setup_ch_structures_sn_uv(struct xpc_partition *part)
+{
+	struct xpc_channel_uv *ch_uv;
+	int ch_number;
+
+	for (ch_number = 0; ch_number < part->nchannels; ch_number++) {
+		ch_uv = &part->channels[ch_number].sn.uv;
+
+		xpc_init_fifo_uv(&ch_uv->msg_slot_free_list);
+		xpc_init_fifo_uv(&ch_uv->recv_msg_list);
+	}
+
+	return xpSuccess;
+}
+
+/*
+ * Teardown the channel structures that are uv specific.
+ */
+static void
+xpc_teardown_ch_structures_sn_uv(struct xpc_partition *part)
+{
+	/* nothing needs to be done */
+	return;
+}
+
+static enum xp_retval
+xpc_make_first_contact_uv(struct xpc_partition *part)
+{
+	struct xpc_activate_mq_msg_uv msg;
+
+	/*
+	 * We send a sync msg to get the remote partition's remote_act_state
+	 * updated to our current act_state which at this point should
+	 * be XPC_P_AS_ACTIVATING.
+	 */
+	xpc_send_activate_IRQ_part_uv(part, &msg, sizeof(msg),
+				      XPC_ACTIVATE_MQ_MSG_SYNC_ACT_STATE_UV);
+
+	while (part->sn.uv.remote_act_state != XPC_P_AS_ACTIVATING) {
+
+		dev_dbg(xpc_part, "waiting to make first contact with "
+			"partition %d\n", XPC_PARTID(part));
+
+		/* wait a 1/4 of a second or so */
+		(void)msleep_interruptible(250);
+
+		if (part->act_state == XPC_P_AS_DEACTIVATING)
+			return part->reason;
+	}
+
+	return xpSuccess;
+}
+
+static u64
+xpc_get_chctl_all_flags_uv(struct xpc_partition *part)
+{
+	unsigned long irq_flags;
+	union xpc_channel_ctl_flags chctl;
+
+	spin_lock_irqsave(&part->chctl_lock, irq_flags);
+	chctl = part->chctl;
+	if (chctl.all_flags != 0)
+		part->chctl.all_flags = 0;
+
+	spin_unlock_irqrestore(&part->chctl_lock, irq_flags);
+	return chctl.all_flags;
+}
+
+static enum xp_retval
+xpc_allocate_send_msg_slot_uv(struct xpc_channel *ch)
+{
+	struct xpc_channel_uv *ch_uv = &ch->sn.uv;
+	struct xpc_send_msg_slot_uv *msg_slot;
+	unsigned long irq_flags;
+	int nentries;
+	int entry;
+	size_t nbytes;
+
+	for (nentries = ch->local_nentries; nentries > 0; nentries--) {
+		nbytes = nentries * sizeof(struct xpc_send_msg_slot_uv);
+		ch_uv->send_msg_slots = kzalloc(nbytes, GFP_KERNEL);
+		if (ch_uv->send_msg_slots == NULL)
+			continue;
+
+		for (entry = 0; entry < nentries; entry++) {
+			msg_slot = &ch_uv->send_msg_slots[entry];
+
+			msg_slot->msg_slot_number = entry;
+			xpc_put_fifo_entry_uv(&ch_uv->msg_slot_free_list,
+					      &msg_slot->next);
+		}
+
+		spin_lock_irqsave(&ch->lock, irq_flags);
+		if (nentries < ch->local_nentries)
+			ch->local_nentries = nentries;
+		spin_unlock_irqrestore(&ch->lock, irq_flags);
+		return xpSuccess;
+	}
+
+	return xpNoMemory;
+}
+
+static enum xp_retval
+xpc_allocate_recv_msg_slot_uv(struct xpc_channel *ch)
+{
+	struct xpc_channel_uv *ch_uv = &ch->sn.uv;
+	struct xpc_notify_mq_msg_uv *msg_slot;
+	unsigned long irq_flags;
+	int nentries;
+	int entry;
+	size_t nbytes;
+
+	for (nentries = ch->remote_nentries; nentries > 0; nentries--) {
+		nbytes = nentries * ch->entry_size;
+		ch_uv->recv_msg_slots = kzalloc(nbytes, GFP_KERNEL);
+		if (ch_uv->recv_msg_slots == NULL)
+			continue;
+
+		for (entry = 0; entry < nentries; entry++) {
+			msg_slot = ch_uv->recv_msg_slots + entry *
+			    ch->entry_size;
+
+			msg_slot->hdr.msg_slot_number = entry;
+		}
+
+		spin_lock_irqsave(&ch->lock, irq_flags);
+		if (nentries < ch->remote_nentries)
+			ch->remote_nentries = nentries;
+		spin_unlock_irqrestore(&ch->lock, irq_flags);
+		return xpSuccess;
+	}
+
+	return xpNoMemory;
+}
+
+/*
+ * Allocate msg_slots associated with the channel.
+ */
+static enum xp_retval
+xpc_setup_msg_structures_uv(struct xpc_channel *ch)
+{
+	static enum xp_retval ret;
+	struct xpc_channel_uv *ch_uv = &ch->sn.uv;
+
+	DBUG_ON(ch->flags & XPC_C_SETUP);
+
+	ret = xpc_allocate_send_msg_slot_uv(ch);
+	if (ret == xpSuccess) {
+
+		ret = xpc_allocate_recv_msg_slot_uv(ch);
+		if (ret != xpSuccess) {
+			kfree(ch_uv->send_msg_slots);
+			xpc_init_fifo_uv(&ch_uv->msg_slot_free_list);
+		}
+	}
+	return ret;
+}
+
+/*
+ * Free up msg_slots and clear other stuff that were setup for the specified
+ * channel.
+ */
+static void
+xpc_teardown_msg_structures_uv(struct xpc_channel *ch)
+{
+	struct xpc_channel_uv *ch_uv = &ch->sn.uv;
+
+	DBUG_ON(!spin_is_locked(&ch->lock));
+
+	ch_uv->remote_notify_mq_gpa = 0;
+
+	if (ch->flags & XPC_C_SETUP) {
+		xpc_init_fifo_uv(&ch_uv->msg_slot_free_list);
+		kfree(ch_uv->send_msg_slots);
+		xpc_init_fifo_uv(&ch_uv->recv_msg_list);
+		kfree(ch_uv->recv_msg_slots);
+	}
+}
+
+static void
+xpc_send_chctl_closerequest_uv(struct xpc_channel *ch, unsigned long *irq_flags)
+{
+	struct xpc_activate_mq_msg_chctl_closerequest_uv msg;
+
+	msg.ch_number = ch->number;
+	msg.reason = ch->reason;
+	xpc_send_activate_IRQ_ch_uv(ch, irq_flags, &msg, sizeof(msg),
+				    XPC_ACTIVATE_MQ_MSG_CHCTL_CLOSEREQUEST_UV);
+}
+
+static void
+xpc_send_chctl_closereply_uv(struct xpc_channel *ch, unsigned long *irq_flags)
+{
+	struct xpc_activate_mq_msg_chctl_closereply_uv msg;
+
+	msg.ch_number = ch->number;
+	xpc_send_activate_IRQ_ch_uv(ch, irq_flags, &msg, sizeof(msg),
+				    XPC_ACTIVATE_MQ_MSG_CHCTL_CLOSEREPLY_UV);
+}
+
+static void
+xpc_send_chctl_openrequest_uv(struct xpc_channel *ch, unsigned long *irq_flags)
+{
+	struct xpc_activate_mq_msg_chctl_openrequest_uv msg;
+
+	msg.ch_number = ch->number;
+	msg.entry_size = ch->entry_size;
+	msg.local_nentries = ch->local_nentries;
+	xpc_send_activate_IRQ_ch_uv(ch, irq_flags, &msg, sizeof(msg),
+				    XPC_ACTIVATE_MQ_MSG_CHCTL_OPENREQUEST_UV);
+}
+
+static void
+xpc_send_chctl_openreply_uv(struct xpc_channel *ch, unsigned long *irq_flags)
+{
+	struct xpc_activate_mq_msg_chctl_openreply_uv msg;
+
+	msg.ch_number = ch->number;
+	msg.local_nentries = ch->local_nentries;
+	msg.remote_nentries = ch->remote_nentries;
+	msg.local_notify_mq_gpa = uv_gpa(xpc_notify_mq_uv);
+	xpc_send_activate_IRQ_ch_uv(ch, irq_flags, &msg, sizeof(msg),
+				    XPC_ACTIVATE_MQ_MSG_CHCTL_OPENREPLY_UV);
+}
+
+static void
+xpc_send_chctl_local_msgrequest_uv(struct xpc_partition *part, int ch_number)
+{
+	unsigned long irq_flags;
+
+	spin_lock_irqsave(&part->chctl_lock, irq_flags);
+	part->chctl.flags[ch_number] |= XPC_CHCTL_MSGREQUEST;
+	spin_unlock_irqrestore(&part->chctl_lock, irq_flags);
+
+	xpc_wakeup_channel_mgr(part);
+}
+
+static void
+xpc_save_remote_msgqueue_pa_uv(struct xpc_channel *ch,
+			       unsigned long msgqueue_pa)
+{
+	ch->sn.uv.remote_notify_mq_gpa = msgqueue_pa;
+}
+
+static void
+xpc_indicate_partition_engaged_uv(struct xpc_partition *part)
+{
+	struct xpc_activate_mq_msg_uv msg;
+
+	xpc_send_activate_IRQ_part_uv(part, &msg, sizeof(msg),
+				      XPC_ACTIVATE_MQ_MSG_MARK_ENGAGED_UV);
+}
+
+static void
+xpc_indicate_partition_disengaged_uv(struct xpc_partition *part)
+{
+	struct xpc_activate_mq_msg_uv msg;
+
+	xpc_send_activate_IRQ_part_uv(part, &msg, sizeof(msg),
+				      XPC_ACTIVATE_MQ_MSG_MARK_DISENGAGED_UV);
+}
+
+static void
+xpc_assume_partition_disengaged_uv(short partid)
+{
+	struct xpc_partition_uv *part_uv = &xpc_partitions[partid].sn.uv;
+	unsigned long irq_flags;
+
+	spin_lock_irqsave(&part_uv->flags_lock, irq_flags);
+	part_uv->flags &= ~XPC_P_ENGAGED_UV;
+	spin_unlock_irqrestore(&part_uv->flags_lock, irq_flags);
+}
+
+static int
+xpc_partition_engaged_uv(short partid)
+{
+	return (xpc_partitions[partid].sn.uv.flags & XPC_P_ENGAGED_UV) != 0;
+}
+
+static int
+xpc_any_partition_engaged_uv(void)
+{
+	struct xpc_partition_uv *part_uv;
+	short partid;
+
+	for (partid = 0; partid < XP_MAX_NPARTITIONS_UV; partid++) {
+		part_uv = &xpc_partitions[partid].sn.uv;
+		if ((part_uv->flags & XPC_P_ENGAGED_UV) != 0)
+			return 1;
+	}
+	return 0;
+}
+
+static enum xp_retval
+xpc_allocate_msg_slot_uv(struct xpc_channel *ch, u32 flags,
+			 struct xpc_send_msg_slot_uv **address_of_msg_slot)
+{
+	enum xp_retval ret;
+	struct xpc_send_msg_slot_uv *msg_slot;
+	struct xpc_fifo_entry_uv *entry;
+
+	while (1) {
+		entry = xpc_get_fifo_entry_uv(&ch->sn.uv.msg_slot_free_list);
+		if (entry != NULL)
+			break;
+
+		if (flags & XPC_NOWAIT)
+			return xpNoWait;
+
+		ret = xpc_allocate_msg_wait(ch);
+		if (ret != xpInterrupted && ret != xpTimeout)
+			return ret;
+	}
+
+	msg_slot = container_of(entry, struct xpc_send_msg_slot_uv, next);
+	*address_of_msg_slot = msg_slot;
+	return xpSuccess;
+}
+
+static void
+xpc_free_msg_slot_uv(struct xpc_channel *ch,
+		     struct xpc_send_msg_slot_uv *msg_slot)
+{
+	xpc_put_fifo_entry_uv(&ch->sn.uv.msg_slot_free_list, &msg_slot->next);
+
+	/* wakeup anyone waiting for a free msg slot */
+	if (atomic_read(&ch->n_on_msg_allocate_wq) > 0)
+		wake_up(&ch->msg_allocate_wq);
+}
+
+static void
+xpc_notify_sender_uv(struct xpc_channel *ch,
+		     struct xpc_send_msg_slot_uv *msg_slot,
+		     enum xp_retval reason)
+{
+	xpc_notify_func func = msg_slot->func;
+
+	if (func != NULL && cmpxchg(&msg_slot->func, func, NULL) == func) {
+
+		atomic_dec(&ch->n_to_notify);
+
+		dev_dbg(xpc_chan, "msg_slot->func() called, msg_slot=0x%p "
+			"msg_slot_number=%d partid=%d channel=%d\n", msg_slot,
+			msg_slot->msg_slot_number, ch->partid, ch->number);
+
+		func(reason, ch->partid, ch->number, msg_slot->key);
+
+		dev_dbg(xpc_chan, "msg_slot->func() returned, msg_slot=0x%p "
+			"msg_slot_number=%d partid=%d channel=%d\n", msg_slot,
+			msg_slot->msg_slot_number, ch->partid, ch->number);
+	}
+}
+
+static void
+xpc_handle_notify_mq_ack_uv(struct xpc_channel *ch,
+			    struct xpc_notify_mq_msg_uv *msg)
+{
+	struct xpc_send_msg_slot_uv *msg_slot;
+	int entry = msg->hdr.msg_slot_number % ch->local_nentries;
+
+	msg_slot = &ch->sn.uv.send_msg_slots[entry];
+
+	BUG_ON(msg_slot->msg_slot_number != msg->hdr.msg_slot_number);
+	msg_slot->msg_slot_number += ch->local_nentries;
+
+	if (msg_slot->func != NULL)
+		xpc_notify_sender_uv(ch, msg_slot, xpMsgDelivered);
+
+	xpc_free_msg_slot_uv(ch, msg_slot);
+}
+
+static void
+xpc_handle_notify_mq_msg_uv(struct xpc_partition *part,
+			    struct xpc_notify_mq_msg_uv *msg)
+{
+	struct xpc_partition_uv *part_uv = &part->sn.uv;
+	struct xpc_channel *ch;
+	struct xpc_channel_uv *ch_uv;
+	struct xpc_notify_mq_msg_uv *msg_slot;
+	unsigned long irq_flags;
+	int ch_number = msg->hdr.ch_number;
+
+	if (unlikely(ch_number >= part->nchannels)) {
+		dev_err(xpc_part, "xpc_handle_notify_IRQ_uv() received invalid "
+			"channel number=0x%x in message from partid=%d\n",
+			ch_number, XPC_PARTID(part));
+
+		/* get hb checker to deactivate from the remote partition */
+		spin_lock_irqsave(&xpc_activate_IRQ_rcvd_lock, irq_flags);
+		if (part_uv->act_state_req == 0)
+			xpc_activate_IRQ_rcvd++;
+		part_uv->act_state_req = XPC_P_ASR_DEACTIVATE_UV;
+		part_uv->reason = xpBadChannelNumber;
+		spin_unlock_irqrestore(&xpc_activate_IRQ_rcvd_lock, irq_flags);
+
+		wake_up_interruptible(&xpc_activate_IRQ_wq);
+		return;
+	}
+
+	ch = &part->channels[ch_number];
+	xpc_msgqueue_ref(ch);
+
+	if (!(ch->flags & XPC_C_CONNECTED)) {
+		xpc_msgqueue_deref(ch);
+		return;
+	}
+
+	/* see if we're really dealing with an ACK for a previously sent msg */
+	if (msg->hdr.size == 0) {
+		xpc_handle_notify_mq_ack_uv(ch, msg);
+		xpc_msgqueue_deref(ch);
+		return;
+	}
+
+	/* we're dealing with a normal message sent via the notify_mq */
+	ch_uv = &ch->sn.uv;
+
+	msg_slot = (struct xpc_notify_mq_msg_uv *)((u64)ch_uv->recv_msg_slots +
+		    (msg->hdr.msg_slot_number % ch->remote_nentries) *
+		    ch->entry_size);
+
+	BUG_ON(msg->hdr.msg_slot_number != msg_slot->hdr.msg_slot_number);
+	BUG_ON(msg_slot->hdr.size != 0);
+
+	memcpy(msg_slot, msg, msg->hdr.size);
+
+	xpc_put_fifo_entry_uv(&ch_uv->recv_msg_list, &msg_slot->hdr.u.next);
+
+	if (ch->flags & XPC_C_CONNECTEDCALLOUT_MADE) {
+		/*
+		 * If there is an existing idle kthread get it to deliver
+		 * the payload, otherwise we'll have to get the channel mgr
+		 * for this partition to create a kthread to do the delivery.
+		 */
+		if (atomic_read(&ch->kthreads_idle) > 0)
+			wake_up_nr(&ch->idle_wq, 1);
+		else
+			xpc_send_chctl_local_msgrequest_uv(part, ch->number);
+	}
+	xpc_msgqueue_deref(ch);
+}
+
+static irqreturn_t
+xpc_handle_notify_IRQ_uv(int irq, void *dev_id)
+{
+	struct xpc_notify_mq_msg_uv *msg;
+	short partid;
+	struct xpc_partition *part;
+
+	while ((msg = gru_get_next_message(xpc_notify_mq_uv)) != NULL) {
+
+		partid = msg->hdr.partid;
+		if (partid < 0 || partid >= XP_MAX_NPARTITIONS_UV) {
+			dev_err(xpc_part, "xpc_handle_notify_IRQ_uv() received "
+				"invalid partid=0x%x in message\n", partid);
+		} else {
+			part = &xpc_partitions[partid];
+
+			if (xpc_part_ref(part)) {
+				xpc_handle_notify_mq_msg_uv(part, msg);
+				xpc_part_deref(part);
+			}
+		}
+
+		gru_free_message(xpc_notify_mq_uv, msg);
+	}
+
+	return IRQ_HANDLED;
+}
+
+static int
+xpc_n_of_deliverable_payloads_uv(struct xpc_channel *ch)
+{
+	return xpc_n_of_fifo_entries_uv(&ch->sn.uv.recv_msg_list);
+}
+
+static void
+xpc_process_msg_chctl_flags_uv(struct xpc_partition *part, int ch_number)
+{
+	struct xpc_channel *ch = &part->channels[ch_number];
+	int ndeliverable_payloads;
+
+	xpc_msgqueue_ref(ch);
+
+	ndeliverable_payloads = xpc_n_of_deliverable_payloads_uv(ch);
+
+	if (ndeliverable_payloads > 0 &&
+	    (ch->flags & XPC_C_CONNECTED) &&
+	    (ch->flags & XPC_C_CONNECTEDCALLOUT_MADE)) {
+
+		xpc_activate_kthreads(ch, ndeliverable_payloads);
+	}
+
+	xpc_msgqueue_deref(ch);
+}
+
+static enum xp_retval
+xpc_send_payload_uv(struct xpc_channel *ch, u32 flags, void *payload,
+		    u16 payload_size, u8 notify_type, xpc_notify_func func,
+		    void *key)
+{
+	enum xp_retval ret = xpSuccess;
+	struct xpc_send_msg_slot_uv *msg_slot = NULL;
+	struct xpc_notify_mq_msg_uv *msg;
+	u8 msg_buffer[XPC_NOTIFY_MSG_SIZE_UV];
+	size_t msg_size;
+
+	DBUG_ON(notify_type != XPC_N_CALL);
+
+	msg_size = sizeof(struct xpc_notify_mq_msghdr_uv) + payload_size;
+	if (msg_size > ch->entry_size)
+		return xpPayloadTooBig;
+
+	xpc_msgqueue_ref(ch);
+
+	if (ch->flags & XPC_C_DISCONNECTING) {
+		ret = ch->reason;
+		goto out_1;
+	}
+	if (!(ch->flags & XPC_C_CONNECTED)) {
+		ret = xpNotConnected;
+		goto out_1;
+	}
+
+	ret = xpc_allocate_msg_slot_uv(ch, flags, &msg_slot);
+	if (ret != xpSuccess)
+		goto out_1;
+
+	if (func != NULL) {
+		atomic_inc(&ch->n_to_notify);
+
+		msg_slot->key = key;
+		wmb(); /* a non-NULL func must hit memory after the key */
+		msg_slot->func = func;
+
+		if (ch->flags & XPC_C_DISCONNECTING) {
+			ret = ch->reason;
+			goto out_2;
+		}
+	}
+
+	msg = (struct xpc_notify_mq_msg_uv *)&msg_buffer;
+	msg->hdr.partid = xp_partition_id;
+	msg->hdr.ch_number = ch->number;
+	msg->hdr.size = msg_size;
+	msg->hdr.msg_slot_number = msg_slot->msg_slot_number;
+	memcpy(&msg->payload, payload, payload_size);
+
+	ret = xpc_send_gru_msg(ch->sn.uv.remote_notify_mq_gpa, msg, msg_size);
+	if (ret == xpSuccess)
+		goto out_1;
+
+	XPC_DEACTIVATE_PARTITION(&xpc_partitions[ch->partid], ret);
+out_2:
+	if (func != NULL) {
+		/*
+		 * Try to NULL the msg_slot's func field. If we fail, then
+		 * xpc_notify_senders_of_disconnect_uv() beat us to it, in which
+		 * case we need to pretend we succeeded to send the message
+		 * since the user will get a callout for the disconnect error
+		 * by xpc_notify_senders_of_disconnect_uv(), and to also get an
+		 * error returned here will confuse them. Additionally, since
+		 * in this case the channel is being disconnected we don't need
+		 * to put the the msg_slot back on the free list.
+		 */
+		if (cmpxchg(&msg_slot->func, func, NULL) != func) {
+			ret = xpSuccess;
+			goto out_1;
+		}
+
+		msg_slot->key = NULL;
+		atomic_dec(&ch->n_to_notify);
+	}
+	xpc_free_msg_slot_uv(ch, msg_slot);
+out_1:
+	xpc_msgqueue_deref(ch);
+	return ret;
+}
+
+/*
+ * Tell the callers of xpc_send_notify() that the status of their payloads
+ * is unknown because the channel is now disconnecting.
+ *
+ * We don't worry about putting these msg_slots on the free list since the
+ * msg_slots themselves are about to be kfree'd.
+ */
+static void
+xpc_notify_senders_of_disconnect_uv(struct xpc_channel *ch)
+{
+	struct xpc_send_msg_slot_uv *msg_slot;
+	int entry;
+
+	DBUG_ON(!(ch->flags & XPC_C_DISCONNECTING));
+
+	for (entry = 0; entry < ch->local_nentries; entry++) {
+
+		if (atomic_read(&ch->n_to_notify) == 0)
+			break;
+
+		msg_slot = &ch->sn.uv.send_msg_slots[entry];
+		if (msg_slot->func != NULL)
+			xpc_notify_sender_uv(ch, msg_slot, ch->reason);
+	}
+}
+
+/*
+ * Get the next deliverable message's payload.
+ */
+static void *
+xpc_get_deliverable_payload_uv(struct xpc_channel *ch)
+{
+	struct xpc_fifo_entry_uv *entry;
+	struct xpc_notify_mq_msg_uv *msg;
+	void *payload = NULL;
+
+	if (!(ch->flags & XPC_C_DISCONNECTING)) {
+		entry = xpc_get_fifo_entry_uv(&ch->sn.uv.recv_msg_list);
+		if (entry != NULL) {
+			msg = container_of(entry, struct xpc_notify_mq_msg_uv,
+					   hdr.u.next);
+			payload = &msg->payload;
+		}
+	}
+	return payload;
+}
+
+static void
+xpc_received_payload_uv(struct xpc_channel *ch, void *payload)
+{
+	struct xpc_notify_mq_msg_uv *msg;
+	enum xp_retval ret;
+
+	msg = container_of(payload, struct xpc_notify_mq_msg_uv, payload);
+
+	/* return an ACK to the sender of this message */
+
+	msg->hdr.partid = xp_partition_id;
+	msg->hdr.size = 0;	/* size of zero indicates this is an ACK */
+
+	ret = xpc_send_gru_msg(ch->sn.uv.remote_notify_mq_gpa, msg,
+			       sizeof(struct xpc_notify_mq_msghdr_uv));
+	if (ret != xpSuccess)
+		XPC_DEACTIVATE_PARTITION(&xpc_partitions[ch->partid], ret);
+
+	msg->hdr.msg_slot_number += ch->remote_nentries;
+}
+
+int
+xpc_init_uv(void)
+{
+	xpc_setup_partitions_sn = xpc_setup_partitions_sn_uv;
+	xpc_process_activate_IRQ_rcvd = xpc_process_activate_IRQ_rcvd_uv;
+	xpc_get_partition_rsvd_page_pa = xpc_get_partition_rsvd_page_pa_uv;
+	xpc_setup_rsvd_page_sn = xpc_setup_rsvd_page_sn_uv;
+	xpc_increment_heartbeat = xpc_increment_heartbeat_uv;
+	xpc_offline_heartbeat = xpc_offline_heartbeat_uv;
+	xpc_online_heartbeat = xpc_online_heartbeat_uv;
+	xpc_heartbeat_init = xpc_heartbeat_init_uv;
+	xpc_heartbeat_exit = xpc_heartbeat_exit_uv;
+	xpc_get_remote_heartbeat = xpc_get_remote_heartbeat_uv;
+
+	xpc_request_partition_activation = xpc_request_partition_activation_uv;
+	xpc_request_partition_reactivation =
+	    xpc_request_partition_reactivation_uv;
+	xpc_request_partition_deactivation =
+	    xpc_request_partition_deactivation_uv;
+	xpc_cancel_partition_deactivation_request =
+	    xpc_cancel_partition_deactivation_request_uv;
+
+	xpc_setup_ch_structures_sn = xpc_setup_ch_structures_sn_uv;
+	xpc_teardown_ch_structures_sn = xpc_teardown_ch_structures_sn_uv;
+
+	xpc_make_first_contact = xpc_make_first_contact_uv;
+
+	xpc_get_chctl_all_flags = xpc_get_chctl_all_flags_uv;
+	xpc_send_chctl_closerequest = xpc_send_chctl_closerequest_uv;
+	xpc_send_chctl_closereply = xpc_send_chctl_closereply_uv;
+	xpc_send_chctl_openrequest = xpc_send_chctl_openrequest_uv;
+	xpc_send_chctl_openreply = xpc_send_chctl_openreply_uv;
+
+	xpc_save_remote_msgqueue_pa = xpc_save_remote_msgqueue_pa_uv;
+
+	xpc_setup_msg_structures = xpc_setup_msg_structures_uv;
+	xpc_teardown_msg_structures = xpc_teardown_msg_structures_uv;
+
+	xpc_indicate_partition_engaged = xpc_indicate_partition_engaged_uv;
+	xpc_indicate_partition_disengaged =
+	    xpc_indicate_partition_disengaged_uv;
+	xpc_assume_partition_disengaged = xpc_assume_partition_disengaged_uv;
+	xpc_partition_engaged = xpc_partition_engaged_uv;
+	xpc_any_partition_engaged = xpc_any_partition_engaged_uv;
+
+	xpc_n_of_deliverable_payloads = xpc_n_of_deliverable_payloads_uv;
+	xpc_process_msg_chctl_flags = xpc_process_msg_chctl_flags_uv;
+	xpc_send_payload = xpc_send_payload_uv;
+	xpc_notify_senders_of_disconnect = xpc_notify_senders_of_disconnect_uv;
+	xpc_get_deliverable_payload = xpc_get_deliverable_payload_uv;
+	xpc_received_payload = xpc_received_payload_uv;
+
+	if (sizeof(struct xpc_notify_mq_msghdr_uv) > XPC_MSG_HDR_MAX_SIZE) {
+		dev_err(xpc_part, "xpc_notify_mq_msghdr_uv is larger than %d\n",
+			XPC_MSG_HDR_MAX_SIZE);
+		return -E2BIG;
+	}
+
+	/* ??? The cpuid argument's value is 0, is that what we want? */
+	/* !!! The irq argument's value isn't correct. */
+	xpc_activate_mq_uv = xpc_create_gru_mq_uv(XPC_ACTIVATE_MQ_SIZE_UV, 0, 0,
+						  xpc_handle_activate_IRQ_uv);
+	if (xpc_activate_mq_uv == NULL)
+		return -ENOMEM;
+
+	/* ??? The cpuid argument's value is 0, is that what we want? */
+	/* !!! The irq argument's value isn't correct. */
+	xpc_notify_mq_uv = xpc_create_gru_mq_uv(XPC_NOTIFY_MQ_SIZE_UV, 0, 0,
+						xpc_handle_notify_IRQ_uv);
+	if (xpc_notify_mq_uv == NULL) {
+		/* !!! The irq argument's value isn't correct. */
+		xpc_destroy_gru_mq_uv(xpc_activate_mq_uv,
+				      XPC_ACTIVATE_MQ_SIZE_UV, 0);
+		return -ENOMEM;
+	}
+
+	return 0;
+}
+
+void
+xpc_exit_uv(void)
+{
+	/* !!! The irq argument's value isn't correct. */
+	xpc_destroy_gru_mq_uv(xpc_notify_mq_uv, XPC_NOTIFY_MQ_SIZE_UV, 0);
+
+	/* !!! The irq argument's value isn't correct. */
+	xpc_destroy_gru_mq_uv(xpc_activate_mq_uv, XPC_ACTIVATE_MQ_SIZE_UV, 0);
+}
diff --git a/drivers/misc/sgi-xp/xpnet.c b/drivers/misc/sgi-xp/xpnet.c
index 822dc8e8d7f0..71513b3af708 100644
--- a/drivers/misc/sgi-xp/xpnet.c
+++ b/drivers/misc/sgi-xp/xpnet.c
@@ -21,21 +21,8 @@
  */
 
 #include <linux/module.h>
-#include <linux/types.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/ioport.h>
 #include <linux/netdevice.h>
 #include <linux/etherdevice.h>
-#include <linux/delay.h>
-#include <linux/ethtool.h>
-#include <linux/mii.h>
-#include <linux/smp.h>
-#include <linux/string.h>
-#include <asm/sn/bte.h>
-#include <asm/sn/io.h>
-#include <asm/sn/sn_sal.h>
-#include <asm/atomic.h>
 #include "xp.h"
 
 /*
@@ -57,7 +44,7 @@ struct xpnet_message {
 	u16 version;		/* Version for this message */
 	u16 embedded_bytes;	/* #of bytes embedded in XPC message */
 	u32 magic;		/* Special number indicating this is xpnet */
-	u64 buf_pa;		/* phys address of buffer to retrieve */
+	unsigned long buf_pa;	/* phys address of buffer to retrieve */
 	u32 size;		/* #of bytes in buffer */
 	u8 leadin_ignore;	/* #of bytes to ignore at the beginning */
 	u8 tailout_ignore;	/* #of bytes to ignore at the end */
@@ -70,11 +57,10 @@ struct xpnet_message {
  *
  * XPC expects each message to exist in an individual cacheline.
  */
-#define XPNET_MSG_SIZE		(L1_CACHE_BYTES - XPC_MSG_PAYLOAD_OFFSET)
+#define XPNET_MSG_SIZE		XPC_MSG_PAYLOAD_MAX_SIZE
 #define XPNET_MSG_DATA_MAX	\
-		(XPNET_MSG_SIZE - (u64)(&((struct xpnet_message *)0)->data))
-#define XPNET_MSG_ALIGNED_SIZE	(L1_CACHE_ALIGN(XPNET_MSG_SIZE))
-#define XPNET_MSG_NENTRIES	(PAGE_SIZE / XPNET_MSG_ALIGNED_SIZE)
+		(XPNET_MSG_SIZE - offsetof(struct xpnet_message, data))
+#define XPNET_MSG_NENTRIES	(PAGE_SIZE / XPC_MSG_MAX_SIZE)
 
 #define XPNET_MAX_KTHREADS	(XPNET_MSG_NENTRIES + 1)
 #define XPNET_MAX_IDLE_KTHREADS	(XPNET_MSG_NENTRIES + 1)
@@ -105,7 +91,6 @@ struct xpnet_message {
  * then be released.
  */
 struct xpnet_pending_msg {
-	struct list_head free_list;
 	struct sk_buff *skb;
 	atomic_t use_count;
 };
@@ -121,7 +106,7 @@ struct net_device *xpnet_device;
  * When we are notified of other partitions activating, we add them to
  * our bitmask of partitions to which we broadcast.
  */
-static u64 xpnet_broadcast_partitions;
+static unsigned long *xpnet_broadcast_partitions;
 /* protect above */
 static DEFINE_SPINLOCK(xpnet_broadcast_lock);
 
@@ -141,16 +126,13 @@ static DEFINE_SPINLOCK(xpnet_broadcast_lock);
 #define XPNET_DEF_MTU (0x8000UL)
 
 /*
- * The partition id is encapsulated in the MAC address.  The following
- * define locates the octet the partid is in.
+ * The partid is encapsulated in the MAC address beginning in the following
+ * octet and it consists of two octets.
  */
-#define XPNET_PARTID_OCTET	1
-#define XPNET_LICENSE_OCTET	2
+#define XPNET_PARTID_OCTET	2
+
+/* Define the XPNET debug device structures to be used with dev_dbg() et al */
 
-/*
- * Define the XPNET debug device structure that is to be used with dev_dbg(),
- * dev_err(), dev_warn(), and dev_info().
- */
 struct device_driver xpnet_dbg_name = {
 	.name = "xpnet"
 };
@@ -169,7 +151,8 @@ static void
 xpnet_receive(short partid, int channel, struct xpnet_message *msg)
 {
 	struct sk_buff *skb;
-	bte_result_t bret;
+	void *dst;
+	enum xp_retval ret;
 	struct xpnet_dev_private *priv =
 	    (struct xpnet_dev_private *)xpnet_device->priv;
 
@@ -201,7 +184,7 @@ xpnet_receive(short partid, int channel, struct xpnet_message *msg)
 
 	/*
 	 * The allocated skb has some reserved space.
-	 * In order to use bte_copy, we need to get the
+	 * In order to use xp_remote_memcpy(), we need to get the
 	 * skb->data pointer moved forward.
 	 */
 	skb_reserve(skb, (L1_CACHE_BYTES - ((u64)skb->data &
@@ -226,26 +209,21 @@ xpnet_receive(short partid, int channel, struct xpnet_message *msg)
 		skb_copy_to_linear_data(skb, &msg->data,
 					(size_t)msg->embedded_bytes);
 	} else {
+		dst = (void *)((u64)skb->data & ~(L1_CACHE_BYTES - 1));
 		dev_dbg(xpnet, "transferring buffer to the skb->data area;\n\t"
-			"bte_copy(0x%p, 0x%p, %hu)\n", (void *)msg->buf_pa,
-			(void *)__pa((u64)skb->data & ~(L1_CACHE_BYTES - 1)),
-			msg->size);
-
-		bret = bte_copy(msg->buf_pa,
-				__pa((u64)skb->data & ~(L1_CACHE_BYTES - 1)),
-				msg->size, (BTE_NOTIFY | BTE_WACQUIRE), NULL);
+			"xp_remote_memcpy(0x%p, 0x%p, %hu)\n", dst,
+					  (void *)msg->buf_pa, msg->size);
 
-		if (bret != BTE_SUCCESS) {
+		ret = xp_remote_memcpy(xp_pa(dst), msg->buf_pa, msg->size);
+		if (ret != xpSuccess) {
 			/*
-			 * >>> Need better way of cleaning skb.  Currently skb
-			 * >>> appears in_use and we can't just call
-			 * >>> dev_kfree_skb.
+			 * !!! Need better way of cleaning skb.  Currently skb
+			 * !!! appears in_use and we can't just call
+			 * !!! dev_kfree_skb.
 			 */
-			dev_err(xpnet, "bte_copy(0x%p, 0x%p, 0x%hx) returned "
-				"error=0x%x\n", (void *)msg->buf_pa,
-				(void *)__pa((u64)skb->data &
-					     ~(L1_CACHE_BYTES - 1)),
-				msg->size, bret);
+			dev_err(xpnet, "xp_remote_memcpy(0x%p, 0x%p, 0x%hx) "
+				"returned error=0x%x\n", dst,
+				(void *)msg->buf_pa, msg->size, ret);
 
 			xpc_received(partid, channel, (void *)msg);
 
@@ -285,9 +263,7 @@ static void
 xpnet_connection_activity(enum xp_retval reason, short partid, int channel,
 			  void *data, void *key)
 {
-	long bp;
-
-	DBUG_ON(partid <= 0 || partid >= XP_MAX_PARTITIONS);
+	DBUG_ON(partid < 0 || partid >= xp_max_npartitions);
 	DBUG_ON(channel != XPC_NET_CHANNEL);
 
 	switch (reason) {
@@ -299,31 +275,28 @@ xpnet_connection_activity(enum xp_retval reason, short partid, int channel,
 
 	case xpConnected:	/* connection completed to a partition */
 		spin_lock_bh(&xpnet_broadcast_lock);
-		xpnet_broadcast_partitions |= 1UL << (partid - 1);
-		bp = xpnet_broadcast_partitions;
+		__set_bit(partid, xpnet_broadcast_partitions);
 		spin_unlock_bh(&xpnet_broadcast_lock);
 
 		netif_carrier_on(xpnet_device);
 
-		dev_dbg(xpnet, "%s connection created to partition %d; "
-			"xpnet_broadcast_partitions=0x%lx\n",
-			xpnet_device->name, partid, bp);
+		dev_dbg(xpnet, "%s connected to partition %d\n",
+			xpnet_device->name, partid);
 		break;
 
 	default:
 		spin_lock_bh(&xpnet_broadcast_lock);
-		xpnet_broadcast_partitions &= ~(1UL << (partid - 1));
-		bp = xpnet_broadcast_partitions;
+		__clear_bit(partid, xpnet_broadcast_partitions);
 		spin_unlock_bh(&xpnet_broadcast_lock);
 
-		if (bp == 0)
+		if (bitmap_empty((unsigned long *)xpnet_broadcast_partitions,
+				 xp_max_npartitions)) {
 			netif_carrier_off(xpnet_device);
+		}
 
-		dev_dbg(xpnet, "%s disconnected from partition %d; "
-			"xpnet_broadcast_partitions=0x%lx\n",
-			xpnet_device->name, partid, bp);
+		dev_dbg(xpnet, "%s disconnected from partition %d\n",
+			xpnet_device->name, partid);
 		break;
-
 	}
 }
 
@@ -334,8 +307,10 @@ xpnet_dev_open(struct net_device *dev)
 
 	dev_dbg(xpnet, "calling xpc_connect(%d, 0x%p, NULL, %ld, %ld, %ld, "
 		"%ld)\n", XPC_NET_CHANNEL, xpnet_connection_activity,
-		XPNET_MSG_SIZE, XPNET_MSG_NENTRIES, XPNET_MAX_KTHREADS,
-		XPNET_MAX_IDLE_KTHREADS);
+		(unsigned long)XPNET_MSG_SIZE,
+		(unsigned long)XPNET_MSG_NENTRIES,
+		(unsigned long)XPNET_MAX_KTHREADS,
+		(unsigned long)XPNET_MAX_IDLE_KTHREADS);
 
 	ret = xpc_connect(XPC_NET_CHANNEL, xpnet_connection_activity, NULL,
 			  XPNET_MSG_SIZE, XPNET_MSG_NENTRIES,
@@ -426,35 +401,74 @@ xpnet_send_completed(enum xp_retval reason, short partid, int channel,
 	}
 }
 
+static void
+xpnet_send(struct sk_buff *skb, struct xpnet_pending_msg *queued_msg,
+	   u64 start_addr, u64 end_addr, u16 embedded_bytes, int dest_partid)
+{
+	u8 msg_buffer[XPNET_MSG_SIZE];
+	struct xpnet_message *msg = (struct xpnet_message *)&msg_buffer;
+	u16 msg_size = sizeof(struct xpnet_message);
+	enum xp_retval ret;
+
+	msg->embedded_bytes = embedded_bytes;
+	if (unlikely(embedded_bytes != 0)) {
+		msg->version = XPNET_VERSION_EMBED;
+		dev_dbg(xpnet, "calling memcpy(0x%p, 0x%p, 0x%lx)\n",
+			&msg->data, skb->data, (size_t)embedded_bytes);
+		skb_copy_from_linear_data(skb, &msg->data,
+					  (size_t)embedded_bytes);
+		msg_size += embedded_bytes - 1;
+	} else {
+		msg->version = XPNET_VERSION;
+	}
+	msg->magic = XPNET_MAGIC;
+	msg->size = end_addr - start_addr;
+	msg->leadin_ignore = (u64)skb->data - start_addr;
+	msg->tailout_ignore = end_addr - (u64)skb_tail_pointer(skb);
+	msg->buf_pa = xp_pa((void *)start_addr);
+
+	dev_dbg(xpnet, "sending XPC message to %d:%d\n"
+		KERN_DEBUG "msg->buf_pa=0x%lx, msg->size=%u, "
+		"msg->leadin_ignore=%u, msg->tailout_ignore=%u\n",
+		dest_partid, XPC_NET_CHANNEL, msg->buf_pa, msg->size,
+		msg->leadin_ignore, msg->tailout_ignore);
+
+	atomic_inc(&queued_msg->use_count);
+
+	ret = xpc_send_notify(dest_partid, XPC_NET_CHANNEL, XPC_NOWAIT, msg,
+			      msg_size, xpnet_send_completed, queued_msg);
+	if (unlikely(ret != xpSuccess))
+		atomic_dec(&queued_msg->use_count);
+}
+
 /*
  * Network layer has formatted a packet (skb) and is ready to place it
  * "on the wire".  Prepare and send an xpnet_message to all partitions
  * which have connected with us and are targets of this packet.
  *
  * MAC-NOTE:  For the XPNET driver, the MAC address contains the
- * destination partition_id.  If the destination partition id word
- * is 0xff, this packet is to broadcast to all partitions.
+ * destination partid.  If the destination partid octets are 0xffff,
+ * this packet is to be broadcast to all connected partitions.
  */
 static int
 xpnet_dev_hard_start_xmit(struct sk_buff *skb, struct net_device *dev)
 {
 	struct xpnet_pending_msg *queued_msg;
-	enum xp_retval ret;
-	struct xpnet_message *msg;
 	u64 start_addr, end_addr;
-	long dp;
-	u8 second_mac_octet;
 	short dest_partid;
-	struct xpnet_dev_private *priv;
-	u16 embedded_bytes;
-
-	priv = (struct xpnet_dev_private *)dev->priv;
+	struct xpnet_dev_private *priv = (struct xpnet_dev_private *)dev->priv;
+	u16 embedded_bytes = 0;
 
 	dev_dbg(xpnet, ">skb->head=0x%p skb->data=0x%p skb->tail=0x%p "
 		"skb->end=0x%p skb->len=%d\n", (void *)skb->head,
 		(void *)skb->data, skb_tail_pointer(skb), skb_end_pointer(skb),
 		skb->len);
 
+	if (skb->data[0] == 0x33) {
+		dev_kfree_skb(skb);
+		return 0;	/* nothing needed to be done */
+	}
+
 	/*
 	 * The xpnet_pending_msg tracks how many outstanding
 	 * xpc_send_notifies are relying on this skb.  When none
@@ -466,7 +480,6 @@ xpnet_dev_hard_start_xmit(struct sk_buff *skb, struct net_device *dev)
 			 "packet\n", sizeof(struct xpnet_pending_msg));
 
 		priv->stats.tx_errors++;
-
 		return -ENOMEM;
 	}
 
@@ -475,7 +488,6 @@ xpnet_dev_hard_start_xmit(struct sk_buff *skb, struct net_device *dev)
 	end_addr = L1_CACHE_ALIGN((u64)skb_tail_pointer(skb));
 
 	/* calculate how many bytes to embed in the XPC message */
-	embedded_bytes = 0;
 	if (unlikely(skb->len <= XPNET_MSG_DATA_MAX)) {
 		/* skb->data does fit so embed */
 		embedded_bytes = skb->len;
@@ -491,82 +503,28 @@ xpnet_dev_hard_start_xmit(struct sk_buff *skb, struct net_device *dev)
 	atomic_set(&queued_msg->use_count, 1);
 	queued_msg->skb = skb;
 
-	second_mac_octet = skb->data[XPNET_PARTID_OCTET];
-	if (second_mac_octet == 0xff) {
+	if (skb->data[0] == 0xff) {
 		/* we are being asked to broadcast to all partitions */
-		dp = xpnet_broadcast_partitions;
-	} else if (second_mac_octet != 0) {
-		dp = xpnet_broadcast_partitions &
-		    (1UL << (second_mac_octet - 1));
-	} else {
-		/* 0 is an invalid partid.  Ignore */
-		dp = 0;
-	}
-	dev_dbg(xpnet, "destination Partitions mask (dp) = 0x%lx\n", dp);
-
-	/*
-	 * If we wanted to allow promiscuous mode to work like an
-	 * unswitched network, this would be a good point to OR in a
-	 * mask of partitions which should be receiving all packets.
-	 */
-
-	/*
-	 * Main send loop.
-	 */
-	for (dest_partid = 1; dp && dest_partid < XP_MAX_PARTITIONS;
-	     dest_partid++) {
+		for_each_bit(dest_partid, xpnet_broadcast_partitions,
+			     xp_max_npartitions) {
 
-		if (!(dp & (1UL << (dest_partid - 1)))) {
-			/* not destined for this partition */
-			continue;
+			xpnet_send(skb, queued_msg, start_addr, end_addr,
+				   embedded_bytes, dest_partid);
 		}
+	} else {
+		dest_partid = (short)skb->data[XPNET_PARTID_OCTET + 1];
+		dest_partid |= (short)skb->data[XPNET_PARTID_OCTET + 0] << 8;
 
-		/* remove this partition from the destinations mask */
-		dp &= ~(1UL << (dest_partid - 1));
-
-		/* found a partition to send to */
-
-		ret = xpc_allocate(dest_partid, XPC_NET_CHANNEL,
-				   XPC_NOWAIT, (void **)&msg);
-		if (unlikely(ret != xpSuccess))
-			continue;
-
-		msg->embedded_bytes = embedded_bytes;
-		if (unlikely(embedded_bytes != 0)) {
-			msg->version = XPNET_VERSION_EMBED;
-			dev_dbg(xpnet, "calling memcpy(0x%p, 0x%p, 0x%lx)\n",
-				&msg->data, skb->data, (size_t)embedded_bytes);
-			skb_copy_from_linear_data(skb, &msg->data,
-						  (size_t)embedded_bytes);
-		} else {
-			msg->version = XPNET_VERSION;
-		}
-		msg->magic = XPNET_MAGIC;
-		msg->size = end_addr - start_addr;
-		msg->leadin_ignore = (u64)skb->data - start_addr;
-		msg->tailout_ignore = end_addr - (u64)skb_tail_pointer(skb);
-		msg->buf_pa = __pa(start_addr);
-
-		dev_dbg(xpnet, "sending XPC message to %d:%d\n"
-			KERN_DEBUG "msg->buf_pa=0x%lx, msg->size=%u, "
-			"msg->leadin_ignore=%u, msg->tailout_ignore=%u\n",
-			dest_partid, XPC_NET_CHANNEL, msg->buf_pa, msg->size,
-			msg->leadin_ignore, msg->tailout_ignore);
-
-		atomic_inc(&queued_msg->use_count);
-
-		ret = xpc_send_notify(dest_partid, XPC_NET_CHANNEL, msg,
-				      xpnet_send_completed, queued_msg);
-		if (unlikely(ret != xpSuccess)) {
-			atomic_dec(&queued_msg->use_count);
-			continue;
+		if (dest_partid >= 0 &&
+		    dest_partid < xp_max_npartitions &&
+		    test_bit(dest_partid, xpnet_broadcast_partitions) != 0) {
+
+			xpnet_send(skb, queued_msg, start_addr, end_addr,
+				   embedded_bytes, dest_partid);
 		}
 	}
 
 	if (atomic_dec_return(&queued_msg->use_count) == 0) {
-		dev_dbg(xpnet, "no partitions to receive packet destined for "
-			"%d\n", dest_partid);
-
 		dev_kfree_skb(skb);
 		kfree(queued_msg);
 	}
@@ -594,23 +552,28 @@ xpnet_dev_tx_timeout(struct net_device *dev)
 static int __init
 xpnet_init(void)
 {
-	int i;
-	u32 license_num;
-	int result = -ENOMEM;
+	int result;
 
-	if (!ia64_platform_is("sn2"))
+	if (!is_shub() && !is_uv())
 		return -ENODEV;
 
 	dev_info(xpnet, "registering network device %s\n", XPNET_DEVICE_NAME);
 
+	xpnet_broadcast_partitions = kzalloc(BITS_TO_LONGS(xp_max_npartitions) *
+					     sizeof(long), GFP_KERNEL);
+	if (xpnet_broadcast_partitions == NULL)
+		return -ENOMEM;
+
 	/*
 	 * use ether_setup() to init the majority of our device
 	 * structure and then override the necessary pieces.
 	 */
 	xpnet_device = alloc_netdev(sizeof(struct xpnet_dev_private),
 				    XPNET_DEVICE_NAME, ether_setup);
-	if (xpnet_device == NULL)
+	if (xpnet_device == NULL) {
+		kfree(xpnet_broadcast_partitions);
 		return -ENOMEM;
+	}
 
 	netif_carrier_off(xpnet_device);
 
@@ -628,14 +591,10 @@ xpnet_init(void)
 	 * MAC addresses.  We chose the first octet of the MAC to be unlikely
 	 * to collide with any vendor's officially issued MAC.
 	 */
-	xpnet_device->dev_addr[0] = 0xfe;
-	xpnet_device->dev_addr[XPNET_PARTID_OCTET] = sn_partition_id;
-	license_num = sn_partition_serial_number_val();
-	for (i = 3; i >= 0; i--) {
-		xpnet_device->dev_addr[XPNET_LICENSE_OCTET + i] =
-		    license_num & 0xff;
-		license_num = license_num >> 8;
-	}
+	xpnet_device->dev_addr[0] = 0x02;     /* locally administered, no OUI */
+
+	xpnet_device->dev_addr[XPNET_PARTID_OCTET + 1] = xp_partition_id;
+	xpnet_device->dev_addr[XPNET_PARTID_OCTET + 0] = (xp_partition_id >> 8);
 
 	/*
 	 * ether_setup() sets this to a multicast device.  We are
@@ -651,8 +610,10 @@ xpnet_init(void)
 	xpnet_device->features = NETIF_F_NO_CSUM;
 
 	result = register_netdev(xpnet_device);
-	if (result != 0)
+	if (result != 0) {
 		free_netdev(xpnet_device);
+		kfree(xpnet_broadcast_partitions);
+	}
 
 	return result;
 }
@@ -666,8 +627,8 @@ xpnet_exit(void)
 		 xpnet_device[0].name);
 
 	unregister_netdev(xpnet_device);
-
 	free_netdev(xpnet_device);
+	kfree(xpnet_broadcast_partitions);
 }
 
 module_exit(xpnet_exit);
diff --git a/drivers/mmc/card/block.c b/drivers/mmc/card/block.c
index 66e5a5487c20..86dbb366415a 100644
--- a/drivers/mmc/card/block.c
+++ b/drivers/mmc/card/block.c
@@ -213,7 +213,8 @@ static int mmc_blk_issue_rq(struct mmc_queue *mq, struct request *req)
 	struct mmc_blk_data *md = mq->data;
 	struct mmc_card *card = md->queue.card;
 	struct mmc_blk_request brq;
-	int ret = 1, sg_pos, data_size;
+	int ret = 1, data_size, i;
+	struct scatterlist *sg;
 
 	mmc_claim_host(card->host);
 
@@ -267,18 +268,22 @@ static int mmc_blk_issue_rq(struct mmc_queue *mq, struct request *req)
 
 		mmc_queue_bounce_pre(mq);
 
+		/*
+		 * Adjust the sg list so it is the same size as the
+		 * request.
+		 */
 		if (brq.data.blocks !=
 		    (req->nr_sectors >> (md->block_bits - 9))) {
 			data_size = brq.data.blocks * brq.data.blksz;
-			for (sg_pos = 0; sg_pos < brq.data.sg_len; sg_pos++) {
-				data_size -= mq->sg[sg_pos].length;
+			for_each_sg(brq.data.sg, sg, brq.data.sg_len, i) {
+				data_size -= sg->length;
 				if (data_size <= 0) {
-					mq->sg[sg_pos].length += data_size;
-					sg_pos++;
+					sg->length += data_size;
+					i++;
 					break;
 				}
 			}
-			brq.data.sg_len = sg_pos;
+			brq.data.sg_len = i;
 		}
 
 		mmc_wait_for_req(card->host, &brq.mrq);
diff --git a/drivers/mmc/card/mmc_test.c b/drivers/mmc/card/mmc_test.c
index a067fe436301..f26b01d811ae 100644
--- a/drivers/mmc/card/mmc_test.c
+++ b/drivers/mmc/card/mmc_test.c
@@ -388,16 +388,14 @@ static int mmc_test_transfer(struct mmc_test_card *test,
 	int ret, i;
 	unsigned long flags;
 
-	BUG_ON(blocks * blksz > BUFFER_SIZE);
-
 	if (write) {
 		for (i = 0;i < blocks * blksz;i++)
 			test->scratch[i] = i;
 	} else {
-		memset(test->scratch, 0, blocks * blksz);
+		memset(test->scratch, 0, BUFFER_SIZE);
 	}
 	local_irq_save(flags);
-	sg_copy_from_buffer(sg, sg_len, test->scratch, blocks * blksz);
+	sg_copy_from_buffer(sg, sg_len, test->scratch, BUFFER_SIZE);
 	local_irq_restore(flags);
 
 	ret = mmc_test_set_blksize(test, blksz);
@@ -444,7 +442,7 @@ static int mmc_test_transfer(struct mmc_test_card *test,
 		}
 	} else {
 		local_irq_save(flags);
-		sg_copy_to_buffer(sg, sg_len, test->scratch, blocks * blksz);
+		sg_copy_to_buffer(sg, sg_len, test->scratch, BUFFER_SIZE);
 		local_irq_restore(flags);
 		for (i = 0;i < blocks * blksz;i++) {
 			if (test->scratch[i] != (u8)i)
@@ -805,69 +803,6 @@ static int mmc_test_multi_xfersize_read(struct mmc_test_card *test)
 	return 0;
 }
 
-static int mmc_test_bigsg_write(struct mmc_test_card *test)
-{
-	int ret;
-	unsigned int size;
-	struct scatterlist sg;
-
-	if (test->card->host->max_blk_count == 1)
-		return RESULT_UNSUP_HOST;
-
-	size = PAGE_SIZE * 2;
-	size = min(size, test->card->host->max_req_size);
-	size = min(size, test->card->host->max_seg_size);
-	size = min(size, test->card->host->max_blk_count * 512);
-
-	memset(test->buffer, 0, BUFFER_SIZE);
-
-	if (size < 1024)
-		return RESULT_UNSUP_HOST;
-
-	sg_init_table(&sg, 1);
-	sg_init_one(&sg, test->buffer, BUFFER_SIZE);
-
-	ret = mmc_test_transfer(test, &sg, 1, 0, size/512, 512, 1);
-	if (ret)
-		return ret;
-
-	return 0;
-}
-
-static int mmc_test_bigsg_read(struct mmc_test_card *test)
-{
-	int ret, i;
-	unsigned int size;
-	struct scatterlist sg;
-
-	if (test->card->host->max_blk_count == 1)
-		return RESULT_UNSUP_HOST;
-
-	size = PAGE_SIZE * 2;
-	size = min(size, test->card->host->max_req_size);
-	size = min(size, test->card->host->max_seg_size);
-	size = min(size, test->card->host->max_blk_count * 512);
-
-	if (size < 1024)
-		return RESULT_UNSUP_HOST;
-
-	memset(test->buffer, 0xCD, BUFFER_SIZE);
-
-	sg_init_table(&sg, 1);
-	sg_init_one(&sg, test->buffer, BUFFER_SIZE);
-	ret = mmc_test_transfer(test, &sg, 1, 0, size/512, 512, 0);
-	if (ret)
-		return ret;
-
-	/* mmc_test_transfer() doesn't check for read overflows */
-	for (i = size;i < BUFFER_SIZE;i++) {
-		if (test->buffer[i] != 0xCD)
-			return RESULT_FAIL;
-	}
-
-	return 0;
-}
-
 #ifdef CONFIG_HIGHMEM
 
 static int mmc_test_write_high(struct mmc_test_card *test)
@@ -1071,20 +1006,6 @@ static const struct mmc_test_case mmc_test_cases[] = {
 		.run = mmc_test_multi_xfersize_read,
 	},
 
-	{
-		.name = "Over-sized SG list write",
-		.prepare = mmc_test_prepare_write,
-		.run = mmc_test_bigsg_write,
-		.cleanup = mmc_test_cleanup,
-	},
-
-	{
-		.name = "Over-sized SG list read",
-		.prepare = mmc_test_prepare_read,
-		.run = mmc_test_bigsg_read,
-		.cleanup = mmc_test_cleanup,
-	},
-
 #ifdef CONFIG_HIGHMEM
 
 	{
diff --git a/drivers/mmc/core/Makefile b/drivers/mmc/core/Makefile
index 19a1a254a0c5..889e5f898f6f 100644
--- a/drivers/mmc/core/Makefile
+++ b/drivers/mmc/core/Makefile
@@ -12,3 +12,4 @@ mmc_core-y			:= core.o bus.o host.o \
 				   sdio.o sdio_ops.o sdio_bus.o \
 				   sdio_cis.o sdio_io.o sdio_irq.o
 
+mmc_core-$(CONFIG_DEBUG_FS)	+= debugfs.o
diff --git a/drivers/mmc/core/bus.c b/drivers/mmc/core/bus.c
index fd95b18e988b..0d9b2d6f9ebf 100644
--- a/drivers/mmc/core/bus.c
+++ b/drivers/mmc/core/bus.c
@@ -252,6 +252,10 @@ int mmc_add_card(struct mmc_card *card)
 	if (ret)
 		return ret;
 
+#ifdef CONFIG_DEBUG_FS
+	mmc_add_card_debugfs(card);
+#endif
+
 	mmc_card_set_present(card);
 
 	return 0;
@@ -263,6 +267,10 @@ int mmc_add_card(struct mmc_card *card)
  */
 void mmc_remove_card(struct mmc_card *card)
 {
+#ifdef CONFIG_DEBUG_FS
+	mmc_remove_card_debugfs(card);
+#endif
+
 	if (mmc_card_present(card)) {
 		if (mmc_host_is_spi(card->host)) {
 			printk(KERN_INFO "%s: SPI card removed\n",
diff --git a/drivers/mmc/core/core.c b/drivers/mmc/core/core.c
index 3ee5b8c3b5ce..044d84eeed7c 100644
--- a/drivers/mmc/core/core.c
+++ b/drivers/mmc/core/core.c
@@ -121,6 +121,7 @@ mmc_start_request(struct mmc_host *host, struct mmc_request *mrq)
 {
 #ifdef CONFIG_MMC_DEBUG
 	unsigned int i, sz;
+	struct scatterlist *sg;
 #endif
 
 	pr_debug("%s: starting CMD%u arg %08x flags %08x\n",
@@ -156,8 +157,8 @@ mmc_start_request(struct mmc_host *host, struct mmc_request *mrq)
 
 #ifdef CONFIG_MMC_DEBUG
 		sz = 0;
-		for (i = 0;i < mrq->data->sg_len;i++)
-			sz += mrq->data->sg[i].length;
+		for_each_sg(mrq->data->sg, sg, mrq->data->sg_len, i)
+			sz += sg->length;
 		BUG_ON(sz != mrq->data->blocks * mrq->data->blksz);
 #endif
 
diff --git a/drivers/mmc/core/core.h b/drivers/mmc/core/core.h
index cdb332b7dedc..c819effa1032 100644
--- a/drivers/mmc/core/core.h
+++ b/drivers/mmc/core/core.h
@@ -52,5 +52,12 @@ int mmc_attach_sdio(struct mmc_host *host, u32 ocr);
 
 extern int use_spi_crc;
 
+/* Debugfs information for hosts and cards */
+void mmc_add_host_debugfs(struct mmc_host *host);
+void mmc_remove_host_debugfs(struct mmc_host *host);
+
+void mmc_add_card_debugfs(struct mmc_card *card);
+void mmc_remove_card_debugfs(struct mmc_card *card);
+
 #endif
 
diff --git a/drivers/mmc/core/debugfs.c b/drivers/mmc/core/debugfs.c
new file mode 100644
index 000000000000..1237bb4c722b
--- /dev/null
+++ b/drivers/mmc/core/debugfs.c
@@ -0,0 +1,225 @@
+/*
+ * Debugfs support for hosts and cards
+ *
+ * Copyright (C) 2008 Atmel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/debugfs.h>
+#include <linux/fs.h>
+#include <linux/seq_file.h>
+#include <linux/stat.h>
+
+#include <linux/mmc/card.h>
+#include <linux/mmc/host.h>
+
+#include "core.h"
+#include "mmc_ops.h"
+
+/* The debugfs functions are optimized away when CONFIG_DEBUG_FS isn't set. */
+static int mmc_ios_show(struct seq_file *s, void *data)
+{
+	static const char *vdd_str[] = {
+		[8]	= "2.0",
+		[9]	= "2.1",
+		[10]	= "2.2",
+		[11]	= "2.3",
+		[12]	= "2.4",
+		[13]	= "2.5",
+		[14]	= "2.6",
+		[15]	= "2.7",
+		[16]	= "2.8",
+		[17]	= "2.9",
+		[18]	= "3.0",
+		[19]	= "3.1",
+		[20]	= "3.2",
+		[21]	= "3.3",
+		[22]	= "3.4",
+		[23]	= "3.5",
+		[24]	= "3.6",
+	};
+	struct mmc_host	*host = s->private;
+	struct mmc_ios	*ios = &host->ios;
+	const char *str;
+
+	seq_printf(s, "clock:\t\t%u Hz\n", ios->clock);
+	seq_printf(s, "vdd:\t\t%u ", ios->vdd);
+	if ((1 << ios->vdd) & MMC_VDD_165_195)
+		seq_printf(s, "(1.65 - 1.95 V)\n");
+	else if (ios->vdd < (ARRAY_SIZE(vdd_str) - 1)
+			&& vdd_str[ios->vdd] && vdd_str[ios->vdd + 1])
+		seq_printf(s, "(%s ~ %s V)\n", vdd_str[ios->vdd],
+				vdd_str[ios->vdd + 1]);
+	else
+		seq_printf(s, "(invalid)\n");
+
+	switch (ios->bus_mode) {
+	case MMC_BUSMODE_OPENDRAIN:
+		str = "open drain";
+		break;
+	case MMC_BUSMODE_PUSHPULL:
+		str = "push-pull";
+		break;
+	default:
+		str = "invalid";
+		break;
+	}
+	seq_printf(s, "bus mode:\t%u (%s)\n", ios->bus_mode, str);
+
+	switch (ios->chip_select) {
+	case MMC_CS_DONTCARE:
+		str = "don't care";
+		break;
+	case MMC_CS_HIGH:
+		str = "active high";
+		break;
+	case MMC_CS_LOW:
+		str = "active low";
+		break;
+	default:
+		str = "invalid";
+		break;
+	}
+	seq_printf(s, "chip select:\t%u (%s)\n", ios->chip_select, str);
+
+	switch (ios->power_mode) {
+	case MMC_POWER_OFF:
+		str = "off";
+		break;
+	case MMC_POWER_UP:
+		str = "up";
+		break;
+	case MMC_POWER_ON:
+		str = "on";
+		break;
+	default:
+		str = "invalid";
+		break;
+	}
+	seq_printf(s, "power mode:\t%u (%s)\n", ios->power_mode, str);
+	seq_printf(s, "bus width:\t%u (%u bits)\n",
+			ios->bus_width, 1 << ios->bus_width);
+
+	switch (ios->timing) {
+	case MMC_TIMING_LEGACY:
+		str = "legacy";
+		break;
+	case MMC_TIMING_MMC_HS:
+		str = "mmc high-speed";
+		break;
+	case MMC_TIMING_SD_HS:
+		str = "sd high-speed";
+		break;
+	default:
+		str = "invalid";
+		break;
+	}
+	seq_printf(s, "timing spec:\t%u (%s)\n", ios->timing, str);
+
+	return 0;
+}
+
+static int mmc_ios_open(struct inode *inode, struct file *file)
+{
+	return single_open(file, mmc_ios_show, inode->i_private);
+}
+
+static const struct file_operations mmc_ios_fops = {
+	.open		= mmc_ios_open,
+	.read		= seq_read,
+	.llseek		= seq_lseek,
+	.release	= single_release,
+};
+
+void mmc_add_host_debugfs(struct mmc_host *host)
+{
+	struct dentry *root;
+
+	root = debugfs_create_dir(mmc_hostname(host), NULL);
+	if (IS_ERR(root))
+		/* Don't complain -- debugfs just isn't enabled */
+		return;
+	if (!root)
+		/* Complain -- debugfs is enabled, but it failed to
+		 * create the directory. */
+		goto err_root;
+
+	host->debugfs_root = root;
+
+	if (!debugfs_create_file("ios", S_IRUSR, root, host, &mmc_ios_fops))
+		goto err_ios;
+
+	return;
+
+err_ios:
+	debugfs_remove_recursive(root);
+	host->debugfs_root = NULL;
+err_root:
+	dev_err(&host->class_dev, "failed to initialize debugfs\n");
+}
+
+void mmc_remove_host_debugfs(struct mmc_host *host)
+{
+	debugfs_remove_recursive(host->debugfs_root);
+}
+
+static int mmc_dbg_card_status_get(void *data, u64 *val)
+{
+	struct mmc_card	*card = data;
+	u32		status;
+	int		ret;
+
+	mmc_claim_host(card->host);
+
+	ret = mmc_send_status(data, &status);
+	if (!ret)
+		*val = status;
+
+	mmc_release_host(card->host);
+
+	return ret;
+}
+DEFINE_SIMPLE_ATTRIBUTE(mmc_dbg_card_status_fops, mmc_dbg_card_status_get,
+		NULL, "%08llx\n");
+
+void mmc_add_card_debugfs(struct mmc_card *card)
+{
+	struct mmc_host	*host = card->host;
+	struct dentry	*root;
+
+	if (!host->debugfs_root)
+		return;
+
+	root = debugfs_create_dir(mmc_card_id(card), host->debugfs_root);
+	if (IS_ERR(root))
+		/* Don't complain -- debugfs just isn't enabled */
+		return;
+	if (!root)
+		/* Complain -- debugfs is enabled, but it failed to
+		 * create the directory. */
+		goto err;
+
+	card->debugfs_root = root;
+
+	if (!debugfs_create_x32("state", S_IRUSR, root, &card->state))
+		goto err;
+
+	if (mmc_card_mmc(card) || mmc_card_sd(card))
+		if (!debugfs_create_file("status", S_IRUSR, root, card,
+					&mmc_dbg_card_status_fops))
+			goto err;
+
+	return;
+
+err:
+	debugfs_remove_recursive(root);
+	card->debugfs_root = NULL;
+	dev_err(&card->dev, "failed to initialize debugfs\n");
+}
+
+void mmc_remove_card_debugfs(struct mmc_card *card)
+{
+	debugfs_remove_recursive(card->debugfs_root);
+}
diff --git a/drivers/mmc/core/host.c b/drivers/mmc/core/host.c
index 1d795c5379b5..6da80fd4d974 100644
--- a/drivers/mmc/core/host.c
+++ b/drivers/mmc/core/host.c
@@ -127,6 +127,10 @@ int mmc_add_host(struct mmc_host *host)
 	if (err)
 		return err;
 
+#ifdef CONFIG_DEBUG_FS
+	mmc_add_host_debugfs(host);
+#endif
+
 	mmc_start_host(host);
 
 	return 0;
@@ -146,6 +150,10 @@ void mmc_remove_host(struct mmc_host *host)
 {
 	mmc_stop_host(host);
 
+#ifdef CONFIG_DEBUG_FS
+	mmc_remove_host_debugfs(host);
+#endif
+
 	device_del(&host->class_dev);
 
 	led_trigger_unregister_simple(host->led);
diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig
index dc6f2579f85c..ea8d7a3490d9 100644
--- a/drivers/mmc/host/Kconfig
+++ b/drivers/mmc/host/Kconfig
@@ -174,3 +174,9 @@ config MMC_SDRICOH_CS
 	  To compile this driver as a module, choose M here: the
 	  module will be called sdricoh_cs.
 
+config MMC_TMIO
+	tristate "Toshiba Mobile IO Controller (TMIO) MMC/SD function support"
+	depends on MFD_TMIO
+	help
+	  This provides support for the SD/MMC cell found in TC6393XB,
+	  T7L66XB and also ipaq ASIC3
diff --git a/drivers/mmc/host/Makefile b/drivers/mmc/host/Makefile
index db52eebfb50e..c794cc5ce442 100644
--- a/drivers/mmc/host/Makefile
+++ b/drivers/mmc/host/Makefile
@@ -21,4 +21,5 @@ obj-$(CONFIG_MMC_TIFM_SD)	+= tifm_sd.o
 obj-$(CONFIG_MMC_SPI)		+= mmc_spi.o
 obj-$(CONFIG_MMC_S3C)   	+= s3cmci.o
 obj-$(CONFIG_MMC_SDRICOH_CS)	+= sdricoh_cs.o
+obj-$(CONFIG_MMC_TMIO)		+= tmio_mmc.o
 
diff --git a/drivers/mmc/host/at91_mci.c b/drivers/mmc/host/at91_mci.c
index f15e2064305c..1f8b5b36222c 100644
--- a/drivers/mmc/host/at91_mci.c
+++ b/drivers/mmc/host/at91_mci.c
@@ -73,9 +73,9 @@
 #include <asm/gpio.h>
 
 #include <asm/mach/mmc.h>
-#include <asm/arch/board.h>
-#include <asm/arch/cpu.h>
-#include <asm/arch/at91_mci.h>
+#include <mach/board.h>
+#include <mach/cpu.h>
+#include <mach/at91_mci.h>
 
 #define DRIVER_NAME "at91_mci"
 
@@ -621,12 +621,21 @@ static void at91_mci_send_command(struct at91mci_host *host, struct mmc_command
 				if (cpu_is_at91sam9260 () || cpu_is_at91sam9263())
 					if (host->total_length < 12)
 						host->total_length = 12;
-				host->buffer = dma_alloc_coherent(NULL,
-						host->total_length,
-						&host->physical_address, GFP_KERNEL);
+
+				host->buffer = kmalloc(host->total_length, GFP_KERNEL);
+				if (!host->buffer) {
+					pr_debug("Can't alloc tx buffer\n");
+					cmd->error = -ENOMEM;
+					mmc_request_done(host->mmc, host->request);
+					return;
+				}
 
 				at91_mci_sg_to_dma(host, data);
 
+				host->physical_address = dma_map_single(NULL,
+						host->buffer, host->total_length,
+						DMA_TO_DEVICE);
+
 				pr_debug("Transmitting %d bytes\n", host->total_length);
 
 				at91_mci_write(host, ATMEL_PDC_TPR, host->physical_address);
@@ -694,7 +703,10 @@ static void at91_mci_completed_command(struct at91mci_host *host, unsigned int s
 	cmd->resp[3] = at91_mci_read(host, AT91_MCI_RSPR(3));
 
 	if (host->buffer) {
-		dma_free_coherent(NULL, host->total_length, host->buffer, host->physical_address);
+		dma_unmap_single(NULL,
+				host->physical_address, host->total_length,
+				DMA_TO_DEVICE);
+		kfree(host->buffer);
 		host->buffer = NULL;
 	}
 
diff --git a/drivers/mmc/host/atmel-mci-regs.h b/drivers/mmc/host/atmel-mci-regs.h
index a9a5657706c6..26bd80e65031 100644
--- a/drivers/mmc/host/atmel-mci-regs.h
+++ b/drivers/mmc/host/atmel-mci-regs.h
@@ -82,6 +82,8 @@
 # define MCI_OVRE		(  1 <<  30)	/* RX Overrun Error */
 # define MCI_UNRE		(  1 <<  31)	/* TX Underrun Error */
 
+#define MCI_REGS_SIZE		0x100
+
 /* Register access macros */
 #define mci_readl(port,reg)				\
 	__raw_readl((port)->regs + MCI_##reg)
diff --git a/drivers/mmc/host/atmel-mci.c b/drivers/mmc/host/atmel-mci.c
index cce873c5a149..0bd06f5bd62f 100644
--- a/drivers/mmc/host/atmel-mci.c
+++ b/drivers/mmc/host/atmel-mci.c
@@ -9,13 +9,18 @@
  */
 #include <linux/blkdev.h>
 #include <linux/clk.h>
+#include <linux/debugfs.h>
 #include <linux/device.h>
+#include <linux/err.h>
+#include <linux/gpio.h>
 #include <linux/init.h>
 #include <linux/interrupt.h>
 #include <linux/ioport.h>
 #include <linux/module.h>
 #include <linux/platform_device.h>
 #include <linux/scatterlist.h>
+#include <linux/seq_file.h>
+#include <linux/stat.h>
 
 #include <linux/mmc/host.h>
 
@@ -23,8 +28,7 @@
 #include <asm/io.h>
 #include <asm/unaligned.h>
 
-#include <asm/arch/board.h>
-#include <asm/arch/gpio.h>
+#include <mach/board.h>
 
 #include "atmel-mci-regs.h"
 
@@ -88,6 +92,188 @@ struct atmel_mci {
 #define atmci_clear_pending(host, event)			\
 	clear_bit(event, &host->pending_events)
 
+/*
+ * The debugfs stuff below is mostly optimized away when
+ * CONFIG_DEBUG_FS is not set.
+ */
+static int atmci_req_show(struct seq_file *s, void *v)
+{
+	struct atmel_mci	*host = s->private;
+	struct mmc_request	*mrq = host->mrq;
+	struct mmc_command	*cmd;
+	struct mmc_command	*stop;
+	struct mmc_data		*data;
+
+	/* Make sure we get a consistent snapshot */
+	spin_lock_irq(&host->mmc->lock);
+
+	if (mrq) {
+		cmd = mrq->cmd;
+		data = mrq->data;
+		stop = mrq->stop;
+
+		if (cmd)
+			seq_printf(s,
+				"CMD%u(0x%x) flg %x rsp %x %x %x %x err %d\n",
+				cmd->opcode, cmd->arg, cmd->flags,
+				cmd->resp[0], cmd->resp[1], cmd->resp[2],
+				cmd->resp[2], cmd->error);
+		if (data)
+			seq_printf(s, "DATA %u / %u * %u flg %x err %d\n",
+				data->bytes_xfered, data->blocks,
+				data->blksz, data->flags, data->error);
+		if (stop)
+			seq_printf(s,
+				"CMD%u(0x%x) flg %x rsp %x %x %x %x err %d\n",
+				stop->opcode, stop->arg, stop->flags,
+				stop->resp[0], stop->resp[1], stop->resp[2],
+				stop->resp[2], stop->error);
+	}
+
+	spin_unlock_irq(&host->mmc->lock);
+
+	return 0;
+}
+
+static int atmci_req_open(struct inode *inode, struct file *file)
+{
+	return single_open(file, atmci_req_show, inode->i_private);
+}
+
+static const struct file_operations atmci_req_fops = {
+	.owner		= THIS_MODULE,
+	.open		= atmci_req_open,
+	.read		= seq_read,
+	.llseek		= seq_lseek,
+	.release	= single_release,
+};
+
+static void atmci_show_status_reg(struct seq_file *s,
+		const char *regname, u32 value)
+{
+	static const char	*sr_bit[] = {
+		[0]	= "CMDRDY",
+		[1]	= "RXRDY",
+		[2]	= "TXRDY",
+		[3]	= "BLKE",
+		[4]	= "DTIP",
+		[5]	= "NOTBUSY",
+		[8]	= "SDIOIRQA",
+		[9]	= "SDIOIRQB",
+		[16]	= "RINDE",
+		[17]	= "RDIRE",
+		[18]	= "RCRCE",
+		[19]	= "RENDE",
+		[20]	= "RTOE",
+		[21]	= "DCRCE",
+		[22]	= "DTOE",
+		[30]	= "OVRE",
+		[31]	= "UNRE",
+	};
+	unsigned int		i;
+
+	seq_printf(s, "%s:\t0x%08x", regname, value);
+	for (i = 0; i < ARRAY_SIZE(sr_bit); i++) {
+		if (value & (1 << i)) {
+			if (sr_bit[i])
+				seq_printf(s, " %s", sr_bit[i]);
+			else
+				seq_puts(s, " UNKNOWN");
+		}
+	}
+	seq_putc(s, '\n');
+}
+
+static int atmci_regs_show(struct seq_file *s, void *v)
+{
+	struct atmel_mci	*host = s->private;
+	u32			*buf;
+
+	buf = kmalloc(MCI_REGS_SIZE, GFP_KERNEL);
+	if (!buf)
+		return -ENOMEM;
+
+	/* Grab a more or less consistent snapshot */
+	spin_lock_irq(&host->mmc->lock);
+	memcpy_fromio(buf, host->regs, MCI_REGS_SIZE);
+	spin_unlock_irq(&host->mmc->lock);
+
+	seq_printf(s, "MR:\t0x%08x%s%s CLKDIV=%u\n",
+			buf[MCI_MR / 4],
+			buf[MCI_MR / 4] & MCI_MR_RDPROOF ? " RDPROOF" : "",
+			buf[MCI_MR / 4] & MCI_MR_WRPROOF ? " WRPROOF" : "",
+			buf[MCI_MR / 4] & 0xff);
+	seq_printf(s, "DTOR:\t0x%08x\n", buf[MCI_DTOR / 4]);
+	seq_printf(s, "SDCR:\t0x%08x\n", buf[MCI_SDCR / 4]);
+	seq_printf(s, "ARGR:\t0x%08x\n", buf[MCI_ARGR / 4]);
+	seq_printf(s, "BLKR:\t0x%08x BCNT=%u BLKLEN=%u\n",
+			buf[MCI_BLKR / 4],
+			buf[MCI_BLKR / 4] & 0xffff,
+			(buf[MCI_BLKR / 4] >> 16) & 0xffff);
+
+	/* Don't read RSPR and RDR; it will consume the data there */
+
+	atmci_show_status_reg(s, "SR", buf[MCI_SR / 4]);
+	atmci_show_status_reg(s, "IMR", buf[MCI_IMR / 4]);
+
+	return 0;
+}
+
+static int atmci_regs_open(struct inode *inode, struct file *file)
+{
+	return single_open(file, atmci_regs_show, inode->i_private);
+}
+
+static const struct file_operations atmci_regs_fops = {
+	.owner		= THIS_MODULE,
+	.open		= atmci_regs_open,
+	.read		= seq_read,
+	.llseek		= seq_lseek,
+	.release	= single_release,
+};
+
+static void atmci_init_debugfs(struct atmel_mci *host)
+{
+	struct mmc_host	*mmc;
+	struct dentry	*root;
+	struct dentry	*node;
+	struct resource	*res;
+
+	mmc = host->mmc;
+	root = mmc->debugfs_root;
+	if (!root)
+		return;
+
+	node = debugfs_create_file("regs", S_IRUSR, root, host,
+			&atmci_regs_fops);
+	if (IS_ERR(node))
+		return;
+	if (!node)
+		goto err;
+
+	res = platform_get_resource(host->pdev, IORESOURCE_MEM, 0);
+	node->d_inode->i_size = res->end - res->start + 1;
+
+	node = debugfs_create_file("req", S_IRUSR, root, host, &atmci_req_fops);
+	if (!node)
+		goto err;
+
+	node = debugfs_create_x32("pending_events", S_IRUSR, root,
+				     (u32 *)&host->pending_events);
+	if (!node)
+		goto err;
+
+	node = debugfs_create_x32("completed_events", S_IRUSR, root,
+				     (u32 *)&host->completed_events);
+	if (!node)
+		goto err;
+
+	return;
+
+err:
+	dev_err(&host->pdev->dev,
+		"failed to initialize debugfs for controller\n");
+}
 
 static void atmci_enable(struct atmel_mci *host)
 {
@@ -388,7 +574,7 @@ static int atmci_get_ro(struct mmc_host *mmc)
 	int			read_only = 0;
 	struct atmel_mci	*host = mmc_priv(mmc);
 
-	if (host->wp_pin >= 0) {
+	if (gpio_is_valid(host->wp_pin)) {
 		read_only = gpio_get_value(host->wp_pin);
 		dev_dbg(&mmc->class_dev, "card is %s\n",
 				read_only ? "read-only" : "read-write");
@@ -450,7 +636,7 @@ static void atmci_detect_change(unsigned long data)
 	 * been freed.
 	 */
 	smp_rmb();
-	if (host->detect_pin < 0)
+	if (!gpio_is_valid(host->detect_pin))
 		return;
 
 	enable_irq(gpio_to_irq(host->detect_pin));
@@ -865,7 +1051,7 @@ static int __init atmci_probe(struct platform_device *pdev)
 
 	/* Assume card is present if we don't have a detect pin */
 	host->present = 1;
-	if (host->detect_pin >= 0) {
+	if (gpio_is_valid(host->detect_pin)) {
 		if (gpio_request(host->detect_pin, "mmc_detect")) {
 			dev_dbg(&mmc->class_dev, "no detect pin available\n");
 			host->detect_pin = -1;
@@ -873,7 +1059,7 @@ static int __init atmci_probe(struct platform_device *pdev)
 			host->present = !gpio_get_value(host->detect_pin);
 		}
 	}
-	if (host->wp_pin >= 0) {
+	if (gpio_is_valid(host->wp_pin)) {
 		if (gpio_request(host->wp_pin, "mmc_wp")) {
 			dev_dbg(&mmc->class_dev, "no WP pin available\n");
 			host->wp_pin = -1;
@@ -884,7 +1070,7 @@ static int __init atmci_probe(struct platform_device *pdev)
 
 	mmc_add_host(mmc);
 
-	if (host->detect_pin >= 0) {
+	if (gpio_is_valid(host->detect_pin)) {
 		setup_timer(&host->detect_timer, atmci_detect_change,
 				(unsigned long)host);
 
@@ -905,6 +1091,8 @@ static int __init atmci_probe(struct platform_device *pdev)
 			"Atmel MCI controller at 0x%08lx irq %d\n",
 			host->mapbase, irq);
 
+	atmci_init_debugfs(host);
+
 	return 0;
 
 err_request_irq:
@@ -923,7 +1111,9 @@ static int __exit atmci_remove(struct platform_device *pdev)
 	platform_set_drvdata(pdev, NULL);
 
 	if (host) {
-		if (host->detect_pin >= 0) {
+		/* Debugfs stuff is cleaned up by mmc core */
+
+		if (gpio_is_valid(host->detect_pin)) {
 			int pin = host->detect_pin;
 
 			/* Make sure the timer doesn't enable the interrupt */
@@ -943,7 +1133,7 @@ static int __exit atmci_remove(struct platform_device *pdev)
 		mci_readl(host, SR);
 		clk_disable(host->mck);
 
-		if (host->wp_pin >= 0)
+		if (gpio_is_valid(host->wp_pin))
 			gpio_free(host->wp_pin);
 
 		free_irq(platform_get_irq(pdev, 0), host->mmc);
diff --git a/drivers/mmc/host/au1xmmc.c b/drivers/mmc/host/au1xmmc.c
index 99b20917cc0f..d3f55615c099 100644
--- a/drivers/mmc/host/au1xmmc.c
+++ b/drivers/mmc/host/au1xmmc.c
@@ -61,7 +61,13 @@
 
 /* Hardware definitions */
 #define AU1XMMC_DESCRIPTOR_COUNT 1
-#define AU1XMMC_DESCRIPTOR_SIZE  2048
+
+/* max DMA seg size: 64KB on Au1100, 4MB on Au1200 */
+#ifdef CONFIG_SOC_AU1100
+#define AU1XMMC_DESCRIPTOR_SIZE 0x0000ffff
+#else	/* Au1200 */
+#define AU1XMMC_DESCRIPTOR_SIZE 0x003fffff
+#endif
 
 #define AU1XMMC_OCR (MMC_VDD_27_28 | MMC_VDD_28_29 | MMC_VDD_29_30 | \
 		     MMC_VDD_30_31 | MMC_VDD_31_32 | MMC_VDD_32_33 | \
diff --git a/drivers/mmc/host/imxmmc.c b/drivers/mmc/host/imxmmc.c
index 5e880c0f1349..2f0fcdb869b7 100644
--- a/drivers/mmc/host/imxmmc.c
+++ b/drivers/mmc/host/imxmmc.c
@@ -26,12 +26,6 @@
  *
  */
 
-#ifdef CONFIG_MMC_DEBUG
-#define DEBUG
-#else
-#undef  DEBUG
-#endif
-
 #include <linux/module.h>
 #include <linux/init.h>
 #include <linux/ioport.h>
@@ -48,8 +42,8 @@
 #include <asm/io.h>
 #include <asm/irq.h>
 #include <asm/sizes.h>
-#include <asm/arch/mmc.h>
-#include <asm/arch/imx-dma.h>
+#include <mach/mmc.h>
+#include <mach/imx-dma.h>
 
 #include "imxmmc.h"
 
@@ -907,31 +901,12 @@ static const struct mmc_host_ops imxmci_ops = {
 	.get_ro		= imxmci_get_ro,
 };
 
-static struct resource *platform_device_resource(struct platform_device *dev, unsigned int mask, int nr)
-{
-	int i;
-
-	for (i = 0; i < dev->num_resources; i++)
-		if (dev->resource[i].flags == mask && nr-- == 0)
-			return &dev->resource[i];
-	return NULL;
-}
-
-static int platform_device_irq(struct platform_device *dev, int nr)
-{
-	int i;
-
-	for (i = 0; i < dev->num_resources; i++)
-		if (dev->resource[i].flags == IORESOURCE_IRQ && nr-- == 0)
-			return dev->resource[i].start;
-	return NO_IRQ;
-}
-
 static void imxmci_check_status(unsigned long data)
 {
 	struct imxmci_host *host = (struct imxmci_host *)data;
 
-	if( host->pdata->card_present(mmc_dev(host->mmc)) != host->present ) {
+	if (host->pdata && host->pdata->card_present &&
+	    host->pdata->card_present(mmc_dev(host->mmc)) != host->present) {
 		host->present ^= 1;
 		dev_info(mmc_dev(host->mmc), "card %s\n",
 		      host->present ? "inserted" : "removed");
@@ -962,13 +937,12 @@ static int imxmci_probe(struct platform_device *pdev)
 
 	printk(KERN_INFO "i.MX mmc driver\n");
 
-	r = platform_device_resource(pdev, IORESOURCE_MEM, 0);
-	irq = platform_device_irq(pdev, 0);
-	if (!r || irq == NO_IRQ)
+	r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	irq = platform_get_irq(pdev, 0);
+	if (!r || irq < 0)
 		return -ENXIO;
 
-	r = request_mem_region(r->start, 0x100, "IMXMCI");
-	if (!r)
+	if (!request_mem_region(r->start, 0x100, pdev->name))
 		return -EBUSY;
 
 	mmc = mmc_alloc_host(sizeof(struct imxmci_host), &pdev->dev);
@@ -995,6 +969,8 @@ static int imxmci_probe(struct platform_device *pdev)
 	host->mmc = mmc;
 	host->dma_allocated = 0;
 	host->pdata = pdev->dev.platform_data;
+	if (!host->pdata)
+		dev_warn(&pdev->dev, "No platform data provided!\n");
 
 	spin_lock_init(&host->lock);
 	host->res = r;
@@ -1047,7 +1023,11 @@ static int imxmci_probe(struct platform_device *pdev)
 	if (ret)
 		goto out;
 
-	host->present = host->pdata->card_present(mmc_dev(mmc));
+	if (host->pdata && host->pdata->card_present)
+		host->present = host->pdata->card_present(mmc_dev(mmc));
+	else	/* if there is no way to detect assume that card is present */
+		host->present = 1;
+
 	init_timer(&host->timer);
 	host->timer.data = (unsigned long)host;
 	host->timer.function = imxmci_check_status;
@@ -1073,7 +1053,7 @@ out:
 	}
 	if (mmc)
 		mmc_free_host(mmc);
-	release_resource(r);
+	release_mem_region(r->start, 0x100);
 	return ret;
 }
 
@@ -1102,7 +1082,7 @@ static int imxmci_remove(struct platform_device *pdev)
 		clk_disable(host->clk);
 		clk_put(host->clk);
 
-		release_resource(host->res);
+		release_mem_region(host->res->start, 0x100);
 
 		mmc_free_host(mmc);
 	}
diff --git a/drivers/mmc/host/mmc_spi.c b/drivers/mmc/host/mmc_spi.c
index 41cc63360e43..7503b81374e0 100644
--- a/drivers/mmc/host/mmc_spi.c
+++ b/drivers/mmc/host/mmc_spi.c
@@ -1076,6 +1076,7 @@ static void mmc_spi_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
 		 */
 		if (canpower && ios->power_mode == MMC_POWER_OFF) {
 			int mres;
+			u8 nullbyte = 0;
 
 			host->spi->mode &= ~(SPI_CPOL|SPI_CPHA);
 			mres = spi_setup(host->spi);
@@ -1083,7 +1084,7 @@ static void mmc_spi_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
 				dev_dbg(&host->spi->dev,
 					"switch to SPI mode 0 failed\n");
 
-			if (spi_w8r8(host->spi, 0x00) < 0)
+			if (spi_write(host->spi, &nullbyte, 1) < 0)
 				dev_dbg(&host->spi->dev,
 					"put spi signals to low failed\n");
 
diff --git a/drivers/mmc/host/omap.c b/drivers/mmc/host/omap.c
index dbc26eb6a89e..c16028872bbb 100644
--- a/drivers/mmc/host/omap.c
+++ b/drivers/mmc/host/omap.c
@@ -29,14 +29,13 @@
 
 #include <asm/io.h>
 #include <asm/irq.h>
-#include <asm/mach-types.h>
-
-#include <asm/arch/board.h>
-#include <asm/arch/mmc.h>
-#include <asm/arch/gpio.h>
-#include <asm/arch/dma.h>
-#include <asm/arch/mux.h>
-#include <asm/arch/fpga.h>
+
+#include <mach/board.h>
+#include <mach/mmc.h>
+#include <mach/gpio.h>
+#include <mach/dma.h>
+#include <mach/mux.h>
+#include <mach/fpga.h>
 
 #define	OMAP_MMC_REG_CMD	0x00
 #define	OMAP_MMC_REG_ARGL	0x04
diff --git a/drivers/mmc/host/pxamci.c b/drivers/mmc/host/pxamci.c
index a8e18fe53077..55093ad132ca 100644
--- a/drivers/mmc/host/pxamci.c
+++ b/drivers/mmc/host/pxamci.c
@@ -31,8 +31,8 @@
 #include <asm/io.h>
 #include <asm/sizes.h>
 
-#include <asm/arch/pxa-regs.h>
-#include <asm/arch/mmc.h>
+#include <mach/pxa-regs.h>
+#include <mach/mmc.h>
 
 #include "pxamci.h"
 
diff --git a/drivers/mmc/host/s3cmci.c b/drivers/mmc/host/s3cmci.c
index be550c26da68..ae16d845d746 100644
--- a/drivers/mmc/host/s3cmci.c
+++ b/drivers/mmc/host/s3cmci.c
@@ -18,8 +18,8 @@
 
 #include <asm/dma.h>
 
-#include <asm/arch/regs-sdi.h>
-#include <asm/arch/regs-gpio.h>
+#include <mach/regs-sdi.h>
+#include <mach/regs-gpio.h>
 
 #include <asm/plat-s3c24xx/mci.h>
 
@@ -595,8 +595,9 @@ static irqreturn_t s3cmci_irq_cd(int irq, void *dev_id)
 	return IRQ_HANDLED;
 }
 
-void s3cmci_dma_done_callback(struct s3c2410_dma_chan *dma_ch, void *buf_id,
-			      int size, enum s3c2410_dma_buffresult result)
+static void s3cmci_dma_done_callback(struct s3c2410_dma_chan *dma_ch,
+				     void *buf_id, int size,
+				     enum s3c2410_dma_buffresult result)
 {
 	struct s3cmci_host *host = buf_id;
 	unsigned long iflags;
@@ -740,8 +741,8 @@ request_done:
 	mmc_request_done(host->mmc, mrq);
 }
 
-
-void s3cmci_dma_setup(struct s3cmci_host *host, enum s3c2410_dmasrc source)
+static void s3cmci_dma_setup(struct s3cmci_host *host,
+			     enum s3c2410_dmasrc source)
 {
 	static enum s3c2410_dmasrc last_source = -1;
 	static int setup_ok;
@@ -1003,8 +1004,9 @@ static void s3cmci_send_request(struct mmc_host *mmc)
 	enable_irq(host->irq);
 }
 
-static int s3cmci_card_present(struct s3cmci_host *host)
+static int s3cmci_card_present(struct mmc_host *mmc)
 {
+	struct s3cmci_host *host = mmc_priv(mmc);
 	struct s3c24xx_mci_pdata *pdata = host->pdata;
 	int ret;
 
@@ -1023,7 +1025,7 @@ static void s3cmci_request(struct mmc_host *mmc, struct mmc_request *mrq)
 	host->cmd_is_stop = 0;
 	host->mrq = mrq;
 
-	if (s3cmci_card_present(host) == 0) {
+	if (s3cmci_card_present(mmc) == 0) {
 		dbg(host, dbg_err, "%s: no medium present\n", __func__);
 		host->mrq->cmd->error = -ENOMEDIUM;
 		mmc_request_done(mmc, mrq);
@@ -1138,6 +1140,7 @@ static struct mmc_host_ops s3cmci_ops = {
 	.request	= s3cmci_request,
 	.set_ios	= s3cmci_set_ios,
 	.get_ro		= s3cmci_get_ro,
+	.get_cd		= s3cmci_card_present,
 };
 
 static struct s3c24xx_mci_pdata s3cmci_def_pdata = {
@@ -1206,7 +1209,7 @@ static int __devinit s3cmci_probe(struct platform_device *pdev, int is2440)
 	}
 
 	host->base = ioremap(host->mem->start, RESSIZE(host->mem));
-	if (host->base == 0) {
+	if (!host->base) {
 		dev_err(&pdev->dev, "failed to ioremap() io memory region.\n");
 		ret = -EINVAL;
 		goto probe_free_mem_region;
diff --git a/drivers/mmc/host/sdhci-pci.c b/drivers/mmc/host/sdhci-pci.c
index deb607c52c0d..fcb14c2346cc 100644
--- a/drivers/mmc/host/sdhci-pci.c
+++ b/drivers/mmc/host/sdhci-pci.c
@@ -143,7 +143,8 @@ static int jmicron_probe(struct sdhci_pci_chip *chip)
 		chip->quirks |= SDHCI_QUIRK_32BIT_DMA_ADDR |
 			  SDHCI_QUIRK_32BIT_DMA_SIZE |
 			  SDHCI_QUIRK_32BIT_ADMA_SIZE |
-			  SDHCI_QUIRK_RESET_AFTER_REQUEST;
+			  SDHCI_QUIRK_RESET_AFTER_REQUEST |
+			  SDHCI_QUIRK_BROKEN_SMALL_PIO;
 	}
 
 	/*
diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c
index c3a5db72ddd7..e3a8133560a2 100644
--- a/drivers/mmc/host/sdhci.c
+++ b/drivers/mmc/host/sdhci.c
@@ -278,6 +278,15 @@ static void sdhci_transfer_pio(struct sdhci_host *host)
 	else
 		mask = SDHCI_SPACE_AVAILABLE;
 
+	/*
+	 * Some controllers (JMicron JMB38x) mess up the buffer bits
+	 * for transfers < 4 bytes. As long as it is just one block,
+	 * we can ignore the bits.
+	 */
+	if ((host->quirks & SDHCI_QUIRK_BROKEN_SMALL_PIO) &&
+		(host->data->blocks == 1))
+		mask = ~0;
+
 	while (readl(host->ioaddr + SDHCI_PRESENT_STATE) & mask) {
 		if (host->data->flags & MMC_DATA_READ)
 			sdhci_read_block_pio(host);
@@ -337,7 +346,7 @@ static int sdhci_adma_table_pre(struct sdhci_host *host,
 
 	host->align_addr = dma_map_single(mmc_dev(host->mmc),
 		host->align_buffer, 128 * 4, direction);
-	if (dma_mapping_error(host->align_addr))
+	if (dma_mapping_error(mmc_dev(host->mmc), host->align_addr))
 		goto fail;
 	BUG_ON(host->align_addr & 0x3);
 
@@ -439,7 +448,7 @@ static int sdhci_adma_table_pre(struct sdhci_host *host,
 
 	host->adma_addr = dma_map_single(mmc_dev(host->mmc),
 		host->adma_desc, (128 * 2 + 1) * 4, DMA_TO_DEVICE);
-	if (dma_mapping_error(host->align_addr))
+	if (dma_mapping_error(mmc_dev(host->mmc), host->adma_addr))
 		goto unmap_entries;
 	BUG_ON(host->adma_addr & 0x3);
 
@@ -645,7 +654,7 @@ static void sdhci_prepare_data(struct sdhci_host *host, struct mmc_data *data)
 				 * us an invalid request.
 				 */
 				WARN_ON(1);
-				host->flags &= ~SDHCI_USE_DMA;
+				host->flags &= ~SDHCI_REQ_USE_DMA;
 			} else {
 				writel(host->adma_addr,
 					host->ioaddr + SDHCI_ADMA_ADDRESS);
@@ -664,7 +673,7 @@ static void sdhci_prepare_data(struct sdhci_host *host, struct mmc_data *data)
 				 * us an invalid request.
 				 */
 				WARN_ON(1);
-				host->flags &= ~SDHCI_USE_DMA;
+				host->flags &= ~SDHCI_REQ_USE_DMA;
 			} else {
 				WARN_ON(sg_cnt != 1);
 				writel(sg_dma_address(data->sg),
diff --git a/drivers/mmc/host/sdhci.h b/drivers/mmc/host/sdhci.h
index a06bf8b89343..197d4a05f4ae 100644
--- a/drivers/mmc/host/sdhci.h
+++ b/drivers/mmc/host/sdhci.h
@@ -9,6 +9,8 @@
  * your option) any later version.
  */
 
+#include <linux/scatterlist.h>
+
 /*
  * Controller registers
  */
@@ -204,6 +206,8 @@ struct sdhci_host {
 #define SDHCI_QUIRK_NO_SIMULT_VDD_AND_POWER		(1<<11)
 /* Controller provides an incorrect timeout value for transfers */
 #define SDHCI_QUIRK_BROKEN_TIMEOUT_VAL			(1<<12)
+/* Controller has an issue with buffer bits for small transfers */
+#define SDHCI_QUIRK_BROKEN_SMALL_PIO			(1<<13)
 
 	int			irq;		/* Device IRQ */
 	void __iomem *		ioaddr;		/* Mapped address */
diff --git a/drivers/mmc/host/sdricoh_cs.c b/drivers/mmc/host/sdricoh_cs.c
index f99e9f721629..1df44d966bdb 100644
--- a/drivers/mmc/host/sdricoh_cs.c
+++ b/drivers/mmc/host/sdricoh_cs.c
@@ -29,7 +29,6 @@
 #include <linux/pci.h>
 #include <linux/ioport.h>
 #include <linux/scatterlist.h>
-#include <linux/version.h>
 
 #include <pcmcia/cs_types.h>
 #include <pcmcia/cs.h>
diff --git a/drivers/mmc/host/tmio_mmc.c b/drivers/mmc/host/tmio_mmc.c
new file mode 100644
index 000000000000..95430b81ec11
--- /dev/null
+++ b/drivers/mmc/host/tmio_mmc.c
@@ -0,0 +1,691 @@
+/*
+ *  linux/drivers/mmc/tmio_mmc.c
+ *
+ *  Copyright (C) 2004 Ian Molton
+ *  Copyright (C) 2007 Ian Molton
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Driver for the MMC / SD / SDIO cell found in:
+ *
+ * TC6393XB TC6391XB TC6387XB T7L66XB
+ *
+ * This driver draws mainly on scattered spec sheets, Reverse engineering
+ * of the toshiba e800  SD driver and some parts of the 2.4 ASIC3 driver (4 bit
+ * support). (Further 4 bit support from a later datasheet).
+ *
+ * TODO:
+ *   Investigate using a workqueue for PIO transfers
+ *   Eliminate FIXMEs
+ *   SDIO support
+ *   Better Power management
+ *   Handle MMC errors better
+ *   double buffer support
+ *
+ */
+#include <linux/module.h>
+#include <linux/irq.h>
+#include <linux/device.h>
+#include <linux/delay.h>
+#include <linux/mmc/host.h>
+#include <linux/mfd/core.h>
+#include <linux/mfd/tmio.h>
+
+#include "tmio_mmc.h"
+
+/*
+ * Fixme - documentation conflicts on what the clock values are for the
+ * various dividers.
+ * One document I have says that its a divisor of a 24MHz clock, another 33.
+ * This probably depends on HCLK for a given platform, so we may need to
+ * require HCLK be passed to us from the MFD core.
+ *
+ */
+
+static void tmio_mmc_set_clock(struct tmio_mmc_host *host, int new_clock)
+{
+	void __iomem *cnf = host->cnf;
+	void __iomem *ctl = host->ctl;
+	u32 clk = 0, clock;
+
+	if (new_clock) {
+		for (clock = 46875, clk = 0x100; new_clock >= (clock<<1); ) {
+			clock <<= 1;
+			clk >>= 1;
+		}
+		if (clk & 0x1)
+			clk = 0x20000;
+
+		clk >>= 2;
+		tmio_iowrite8((clk & 0x8000) ? 0 : 1, cnf + CNF_SD_CLK_MODE);
+		clk |= 0x100;
+	}
+
+	tmio_iowrite16(clk, ctl + CTL_SD_CARD_CLK_CTL);
+}
+
+static void tmio_mmc_clk_stop(struct tmio_mmc_host *host)
+{
+	void __iomem *ctl = host->ctl;
+
+	tmio_iowrite16(0x0000, ctl + CTL_CLK_AND_WAIT_CTL);
+	msleep(10);
+	tmio_iowrite16(tmio_ioread16(ctl + CTL_SD_CARD_CLK_CTL) & ~0x0100,
+	       ctl + CTL_SD_CARD_CLK_CTL);
+	msleep(10);
+}
+
+static void tmio_mmc_clk_start(struct tmio_mmc_host *host)
+{
+	void __iomem *ctl = host->ctl;
+
+	tmio_iowrite16(tmio_ioread16(ctl + CTL_SD_CARD_CLK_CTL) | 0x0100,
+	       ctl + CTL_SD_CARD_CLK_CTL);
+	msleep(10);
+	tmio_iowrite16(0x0100, ctl + CTL_CLK_AND_WAIT_CTL);
+	msleep(10);
+}
+
+static void reset(struct tmio_mmc_host *host)
+{
+	void __iomem *ctl = host->ctl;
+
+	/* FIXME - should we set stop clock reg here */
+	tmio_iowrite16(0x0000, ctl + CTL_RESET_SD);
+	tmio_iowrite16(0x0000, ctl + CTL_RESET_SDIO);
+	msleep(10);
+	tmio_iowrite16(0x0001, ctl + CTL_RESET_SD);
+	tmio_iowrite16(0x0001, ctl + CTL_RESET_SDIO);
+	msleep(10);
+}
+
+static void
+tmio_mmc_finish_request(struct tmio_mmc_host *host)
+{
+	struct mmc_request *mrq = host->mrq;
+
+	host->mrq = NULL;
+	host->cmd = NULL;
+	host->data = NULL;
+
+	mmc_request_done(host->mmc, mrq);
+}
+
+/* These are the bitmasks the tmio chip requires to implement the MMC response
+ * types. Note that R1 and R6 are the same in this scheme. */
+#define APP_CMD        0x0040
+#define RESP_NONE      0x0300
+#define RESP_R1        0x0400
+#define RESP_R1B       0x0500
+#define RESP_R2        0x0600
+#define RESP_R3        0x0700
+#define DATA_PRESENT   0x0800
+#define TRANSFER_READ  0x1000
+#define TRANSFER_MULTI 0x2000
+#define SECURITY_CMD   0x4000
+
+static int
+tmio_mmc_start_command(struct tmio_mmc_host *host, struct mmc_command *cmd)
+{
+	void __iomem *ctl = host->ctl;
+	struct mmc_data *data = host->data;
+	int c = cmd->opcode;
+
+	/* Command 12 is handled by hardware */
+	if (cmd->opcode == 12 && !cmd->arg) {
+		tmio_iowrite16(0x001, ctl + CTL_STOP_INTERNAL_ACTION);
+		return 0;
+	}
+
+	switch (mmc_resp_type(cmd)) {
+	case MMC_RSP_NONE: c |= RESP_NONE; break;
+	case MMC_RSP_R1:   c |= RESP_R1;   break;
+	case MMC_RSP_R1B:  c |= RESP_R1B;  break;
+	case MMC_RSP_R2:   c |= RESP_R2;   break;
+	case MMC_RSP_R3:   c |= RESP_R3;   break;
+	default:
+		pr_debug("Unknown response type %d\n", mmc_resp_type(cmd));
+		return -EINVAL;
+	}
+
+	host->cmd = cmd;
+
+/* FIXME - this seems to be ok comented out but the spec suggest this bit should
+ *         be set when issuing app commands.
+ *	if(cmd->flags & MMC_FLAG_ACMD)
+ *		c |= APP_CMD;
+ */
+	if (data) {
+		c |= DATA_PRESENT;
+		if (data->blocks > 1) {
+			tmio_iowrite16(0x100, ctl + CTL_STOP_INTERNAL_ACTION);
+			c |= TRANSFER_MULTI;
+		}
+		if (data->flags & MMC_DATA_READ)
+			c |= TRANSFER_READ;
+	}
+
+	enable_mmc_irqs(ctl, TMIO_MASK_CMD);
+
+	/* Fire off the command */
+	tmio_iowrite32(cmd->arg, ctl + CTL_ARG_REG);
+	tmio_iowrite16(c, ctl + CTL_SD_CMD);
+
+	return 0;
+}
+
+/* This chip always returns (at least?) as much data as you ask for.
+ * I'm unsure what happens if you ask for less than a block. This should be
+ * looked into to ensure that a funny length read doesnt hose the controller.
+ *
+ */
+static inline void tmio_mmc_pio_irq(struct tmio_mmc_host *host)
+{
+	void __iomem *ctl = host->ctl;
+	struct mmc_data *data = host->data;
+	unsigned short *buf;
+	unsigned int count;
+	unsigned long flags;
+
+	if (!data) {
+		pr_debug("Spurious PIO IRQ\n");
+		return;
+	}
+
+	buf = (unsigned short *)(tmio_mmc_kmap_atomic(host, &flags) +
+	      host->sg_off);
+
+	count = host->sg_ptr->length - host->sg_off;
+	if (count > data->blksz)
+		count = data->blksz;
+
+	pr_debug("count: %08x offset: %08x flags %08x\n",
+	    count, host->sg_off, data->flags);
+
+	/* Transfer the data */
+	if (data->flags & MMC_DATA_READ)
+		tmio_ioread16_rep(ctl + CTL_SD_DATA_PORT, buf, count >> 1);
+	else
+		tmio_iowrite16_rep(ctl + CTL_SD_DATA_PORT, buf, count >> 1);
+
+	host->sg_off += count;
+
+	tmio_mmc_kunmap_atomic(host, &flags);
+
+	if (host->sg_off == host->sg_ptr->length)
+		tmio_mmc_next_sg(host);
+
+	return;
+}
+
+static inline void tmio_mmc_data_irq(struct tmio_mmc_host *host)
+{
+	void __iomem *ctl = host->ctl;
+	struct mmc_data *data = host->data;
+	struct mmc_command *stop = data->stop;
+
+	host->data = NULL;
+
+	if (!data) {
+		pr_debug("Spurious data end IRQ\n");
+		return;
+	}
+
+	/* FIXME - return correct transfer count on errors */
+	if (!data->error)
+		data->bytes_xfered = data->blocks * data->blksz;
+	else
+		data->bytes_xfered = 0;
+
+	pr_debug("Completed data request\n");
+
+	/*FIXME - other drivers allow an optional stop command of any given type
+	 *        which we dont do, as the chip can auto generate them.
+	 *        Perhaps we can be smarter about when to use auto CMD12 and
+	 *        only issue the auto request when we know this is the desired
+	 *        stop command, allowing fallback to the stop command the
+	 *        upper layers expect. For now, we do what works.
+	 */
+
+	if (data->flags & MMC_DATA_READ)
+		disable_mmc_irqs(ctl, TMIO_MASK_READOP);
+	else
+		disable_mmc_irqs(ctl, TMIO_MASK_WRITEOP);
+
+	if (stop) {
+		if (stop->opcode == 12 && !stop->arg)
+			tmio_iowrite16(0x000, ctl + CTL_STOP_INTERNAL_ACTION);
+		else
+			BUG();
+	}
+
+	tmio_mmc_finish_request(host);
+}
+
+static inline void tmio_mmc_cmd_irq(struct tmio_mmc_host *host,
+	unsigned int stat)
+{
+	void __iomem *ctl = host->ctl, *addr;
+	struct mmc_command *cmd = host->cmd;
+	int i;
+
+	if (!host->cmd) {
+		pr_debug("Spurious CMD irq\n");
+		return;
+	}
+
+	host->cmd = NULL;
+
+	/* This controller is sicker than the PXA one. Not only do we need to
+	 * drop the top 8 bits of the first response word, we also need to
+	 * modify the order of the response for short response command types.
+	 */
+
+	for (i = 3, addr = ctl + CTL_RESPONSE ; i >= 0 ; i--, addr += 4)
+		cmd->resp[i] = tmio_ioread32(addr);
+
+	if (cmd->flags &  MMC_RSP_136) {
+		cmd->resp[0] = (cmd->resp[0] << 8) | (cmd->resp[1] >> 24);
+		cmd->resp[1] = (cmd->resp[1] << 8) | (cmd->resp[2] >> 24);
+		cmd->resp[2] = (cmd->resp[2] << 8) | (cmd->resp[3] >> 24);
+		cmd->resp[3] <<= 8;
+	} else if (cmd->flags & MMC_RSP_R3) {
+		cmd->resp[0] = cmd->resp[3];
+	}
+
+	if (stat & TMIO_STAT_CMDTIMEOUT)
+		cmd->error = -ETIMEDOUT;
+	else if (stat & TMIO_STAT_CRCFAIL && cmd->flags & MMC_RSP_CRC)
+		cmd->error = -EILSEQ;
+
+	/* If there is data to handle we enable data IRQs here, and
+	 * we will ultimatley finish the request in the data_end handler.
+	 * If theres no data or we encountered an error, finish now.
+	 */
+	if (host->data && !cmd->error) {
+		if (host->data->flags & MMC_DATA_READ)
+			enable_mmc_irqs(ctl, TMIO_MASK_READOP);
+		else
+			enable_mmc_irqs(ctl, TMIO_MASK_WRITEOP);
+	} else {
+		tmio_mmc_finish_request(host);
+	}
+
+	return;
+}
+
+
+static irqreturn_t tmio_mmc_irq(int irq, void *devid)
+{
+	struct tmio_mmc_host *host = devid;
+	void __iomem *ctl = host->ctl;
+	unsigned int ireg, irq_mask, status;
+
+	pr_debug("MMC IRQ begin\n");
+
+	status = tmio_ioread32(ctl + CTL_STATUS);
+	irq_mask = tmio_ioread32(ctl + CTL_IRQ_MASK);
+	ireg = status & TMIO_MASK_IRQ & ~irq_mask;
+
+	pr_debug_status(status);
+	pr_debug_status(ireg);
+
+	if (!ireg) {
+		disable_mmc_irqs(ctl, status & ~irq_mask);
+
+		pr_debug("tmio_mmc: Spurious irq, disabling! "
+			"0x%08x 0x%08x 0x%08x\n", status, irq_mask, ireg);
+		pr_debug_status(status);
+
+		goto out;
+	}
+
+	while (ireg) {
+		/* Card insert / remove attempts */
+		if (ireg & (TMIO_STAT_CARD_INSERT | TMIO_STAT_CARD_REMOVE)) {
+			ack_mmc_irqs(ctl, TMIO_STAT_CARD_INSERT |
+				TMIO_STAT_CARD_REMOVE);
+			mmc_detect_change(host->mmc, 0);
+		}
+
+		/* CRC and other errors */
+/*		if (ireg & TMIO_STAT_ERR_IRQ)
+ *			handled |= tmio_error_irq(host, irq, stat);
+ */
+
+		/* Command completion */
+		if (ireg & TMIO_MASK_CMD) {
+			ack_mmc_irqs(ctl, TMIO_MASK_CMD);
+			tmio_mmc_cmd_irq(host, status);
+		}
+
+		/* Data transfer */
+		if (ireg & (TMIO_STAT_RXRDY | TMIO_STAT_TXRQ)) {
+			ack_mmc_irqs(ctl, TMIO_STAT_RXRDY | TMIO_STAT_TXRQ);
+			tmio_mmc_pio_irq(host);
+		}
+
+		/* Data transfer completion */
+		if (ireg & TMIO_STAT_DATAEND) {
+			ack_mmc_irqs(ctl, TMIO_STAT_DATAEND);
+			tmio_mmc_data_irq(host);
+		}
+
+		/* Check status - keep going until we've handled it all */
+		status = tmio_ioread32(ctl + CTL_STATUS);
+		irq_mask = tmio_ioread32(ctl + CTL_IRQ_MASK);
+		ireg = status & TMIO_MASK_IRQ & ~irq_mask;
+
+		pr_debug("Status at end of loop: %08x\n", status);
+		pr_debug_status(status);
+	}
+	pr_debug("MMC IRQ end\n");
+
+out:
+	return IRQ_HANDLED;
+}
+
+static int tmio_mmc_start_data(struct tmio_mmc_host *host,
+	struct mmc_data *data)
+{
+	void __iomem *ctl = host->ctl;
+
+	pr_debug("setup data transfer: blocksize %08x  nr_blocks %d\n",
+	    data->blksz, data->blocks);
+
+	/* Hardware cannot perform 1 and 2 byte requests in 4 bit mode */
+	if (data->blksz < 4 && host->mmc->ios.bus_width == MMC_BUS_WIDTH_4) {
+		printk(KERN_ERR "%s: %d byte block unsupported in 4 bit mode\n",
+			mmc_hostname(host->mmc), data->blksz);
+		return -EINVAL;
+	}
+
+	tmio_mmc_init_sg(host, data);
+	host->data = data;
+
+	/* Set transfer length / blocksize */
+	tmio_iowrite16(data->blksz,  ctl + CTL_SD_XFER_LEN);
+	tmio_iowrite16(data->blocks, ctl + CTL_XFER_BLK_COUNT);
+
+	return 0;
+}
+
+/* Process requests from the MMC layer */
+static void tmio_mmc_request(struct mmc_host *mmc, struct mmc_request *mrq)
+{
+	struct tmio_mmc_host *host = mmc_priv(mmc);
+	int ret;
+
+	if (host->mrq)
+		pr_debug("request not null\n");
+
+	host->mrq = mrq;
+
+	if (mrq->data) {
+		ret = tmio_mmc_start_data(host, mrq->data);
+		if (ret)
+			goto fail;
+	}
+
+	ret = tmio_mmc_start_command(host, mrq->cmd);
+
+	if (!ret)
+		return;
+
+fail:
+	mrq->cmd->error = ret;
+	mmc_request_done(mmc, mrq);
+}
+
+/* Set MMC clock / power.
+ * Note: This controller uses a simple divider scheme therefore it cannot
+ * run a MMC card at full speed (20MHz). The max clock is 24MHz on SD, but as
+ * MMC wont run that fast, it has to be clocked at 12MHz which is the next
+ * slowest setting.
+ */
+static void tmio_mmc_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
+{
+	struct tmio_mmc_host *host = mmc_priv(mmc);
+	void __iomem *cnf = host->cnf;
+	void __iomem *ctl = host->ctl;
+
+	if (ios->clock)
+		tmio_mmc_set_clock(host, ios->clock);
+
+	/* Power sequence - OFF -> ON -> UP */
+	switch (ios->power_mode) {
+	case MMC_POWER_OFF: /* power down SD bus */
+		tmio_iowrite8(0x00, cnf + CNF_PWR_CTL_2);
+		tmio_mmc_clk_stop(host);
+		break;
+	case MMC_POWER_ON: /* power up SD bus */
+
+		tmio_iowrite8(0x02, cnf + CNF_PWR_CTL_2);
+		break;
+	case MMC_POWER_UP: /* start bus clock */
+		tmio_mmc_clk_start(host);
+		break;
+	}
+
+	switch (ios->bus_width) {
+	case MMC_BUS_WIDTH_1:
+		tmio_iowrite16(0x80e0, ctl + CTL_SD_MEM_CARD_OPT);
+	break;
+	case MMC_BUS_WIDTH_4:
+		tmio_iowrite16(0x00e0, ctl + CTL_SD_MEM_CARD_OPT);
+	break;
+	}
+
+	/* Let things settle. delay taken from winCE driver */
+	udelay(140);
+}
+
+static int tmio_mmc_get_ro(struct mmc_host *mmc)
+{
+	struct tmio_mmc_host *host = mmc_priv(mmc);
+	void __iomem *ctl = host->ctl;
+
+	return (tmio_ioread16(ctl + CTL_STATUS) & TMIO_STAT_WRPROTECT) ? 0 : 1;
+}
+
+static struct mmc_host_ops tmio_mmc_ops = {
+	.request	= tmio_mmc_request,
+	.set_ios	= tmio_mmc_set_ios,
+	.get_ro         = tmio_mmc_get_ro,
+};
+
+#ifdef CONFIG_PM
+static int tmio_mmc_suspend(struct platform_device *dev, pm_message_t state)
+{
+	struct mfd_cell	*cell = (struct mfd_cell *)dev->dev.platform_data;
+	struct mmc_host *mmc = platform_get_drvdata(dev);
+	int ret;
+
+	ret = mmc_suspend_host(mmc, state);
+
+	/* Tell MFD core it can disable us now.*/
+	if (!ret && cell->disable)
+		cell->disable(dev);
+
+	return ret;
+}
+
+static int tmio_mmc_resume(struct platform_device *dev)
+{
+	struct mfd_cell	*cell = (struct mfd_cell *)dev->dev.platform_data;
+	struct mmc_host *mmc = platform_get_drvdata(dev);
+	struct tmio_mmc_host *host = mmc_priv(mmc);
+	void __iomem *cnf = host->cnf;
+	int ret = 0;
+
+	/* Enable the MMC/SD Control registers */
+	tmio_iowrite16(SDCREN, cnf + CNF_CMD);
+	tmio_iowrite32(dev->resource[0].start & 0xfffe, cnf + CNF_CTL_BASE);
+
+	/* Tell the MFD core we are ready to be enabled */
+	if (cell->enable) {
+		ret = cell->enable(dev);
+		if (ret)
+			goto out;
+	}
+
+	mmc_resume_host(mmc);
+
+out:
+	return ret;
+}
+#else
+#define tmio_mmc_suspend NULL
+#define tmio_mmc_resume NULL
+#endif
+
+static int __devinit tmio_mmc_probe(struct platform_device *dev)
+{
+	struct mfd_cell	*cell = (struct mfd_cell *)dev->dev.platform_data;
+	struct resource *res_ctl, *res_cnf;
+	struct tmio_mmc_host *host;
+	struct mmc_host *mmc;
+	int ret = -ENOMEM;
+
+	if (dev->num_resources != 3)
+		goto out;
+
+	res_ctl = platform_get_resource(dev, IORESOURCE_MEM, 0);
+	res_cnf = platform_get_resource(dev, IORESOURCE_MEM, 1);
+	if (!res_ctl || !res_cnf) {
+		ret = -EINVAL;
+		goto out;
+	}
+
+	mmc = mmc_alloc_host(sizeof(struct tmio_mmc_host), &dev->dev);
+	if (!mmc)
+		goto out;
+
+	host = mmc_priv(mmc);
+	host->mmc = mmc;
+	platform_set_drvdata(dev, mmc);
+
+	host->ctl = ioremap(res_ctl->start, res_ctl->end - res_ctl->start);
+	if (!host->ctl)
+		goto host_free;
+
+	host->cnf = ioremap(res_cnf->start, res_cnf->end - res_cnf->start);
+	if (!host->cnf)
+		goto unmap_ctl;
+
+	mmc->ops = &tmio_mmc_ops;
+	mmc->caps = MMC_CAP_4_BIT_DATA;
+	mmc->f_min = 46875; /* 24000000 / 512 */
+	mmc->f_max = 24000000;
+	mmc->ocr_avail = MMC_VDD_32_33 | MMC_VDD_33_34;
+
+	/* Enable the MMC/SD Control registers */
+	tmio_iowrite16(SDCREN, host->cnf + CNF_CMD);
+	tmio_iowrite32(dev->resource[0].start & 0xfffe,
+		host->cnf + CNF_CTL_BASE);
+
+	/* Tell the MFD core we are ready to be enabled */
+	if (cell->enable) {
+		ret = cell->enable(dev);
+		if (ret)
+			goto unmap_cnf;
+	}
+
+	/* Disable SD power during suspend */
+	tmio_iowrite8(0x01, host->cnf + CNF_PWR_CTL_3);
+
+	/* The below is required but why? FIXME */
+	tmio_iowrite8(0x1f, host->cnf + CNF_STOP_CLK_CTL);
+
+	/* Power down SD bus*/
+	tmio_iowrite8(0x0,  host->cnf + CNF_PWR_CTL_2);
+
+	tmio_mmc_clk_stop(host);
+	reset(host);
+
+	ret = platform_get_irq(dev, 0);
+	if (ret >= 0)
+		host->irq = ret;
+	else
+		goto unmap_cnf;
+
+	disable_mmc_irqs(host->ctl, TMIO_MASK_ALL);
+
+	ret = request_irq(host->irq, tmio_mmc_irq, IRQF_DISABLED, "tmio-mmc",
+		host);
+	if (ret)
+		goto unmap_cnf;
+
+	set_irq_type(host->irq, IRQ_TYPE_EDGE_FALLING);
+
+	mmc_add_host(mmc);
+
+	printk(KERN_INFO "%s at 0x%08lx irq %d\n", mmc_hostname(host->mmc),
+	       (unsigned long)host->ctl, host->irq);
+
+	/* Unmask the IRQs we want to know about */
+	enable_mmc_irqs(host->ctl,  TMIO_MASK_IRQ);
+
+	return 0;
+
+unmap_cnf:
+	iounmap(host->cnf);
+unmap_ctl:
+	iounmap(host->ctl);
+host_free:
+	mmc_free_host(mmc);
+out:
+	return ret;
+}
+
+static int __devexit tmio_mmc_remove(struct platform_device *dev)
+{
+	struct mmc_host *mmc = platform_get_drvdata(dev);
+
+	platform_set_drvdata(dev, NULL);
+
+	if (mmc) {
+		struct tmio_mmc_host *host = mmc_priv(mmc);
+		mmc_remove_host(mmc);
+		mmc_free_host(mmc);
+		free_irq(host->irq, host);
+		iounmap(host->ctl);
+		iounmap(host->cnf);
+	}
+
+	return 0;
+}
+
+/* ------------------- device registration ----------------------- */
+
+static struct platform_driver tmio_mmc_driver = {
+	.driver = {
+		.name = "tmio-mmc",
+		.owner = THIS_MODULE,
+	},
+	.probe = tmio_mmc_probe,
+	.remove = __devexit_p(tmio_mmc_remove),
+	.suspend = tmio_mmc_suspend,
+	.resume = tmio_mmc_resume,
+};
+
+
+static int __init tmio_mmc_init(void)
+{
+	return platform_driver_register(&tmio_mmc_driver);
+}
+
+static void __exit tmio_mmc_exit(void)
+{
+	platform_driver_unregister(&tmio_mmc_driver);
+}
+
+module_init(tmio_mmc_init);
+module_exit(tmio_mmc_exit);
+
+MODULE_DESCRIPTION("Toshiba TMIO SD/MMC driver");
+MODULE_AUTHOR("Ian Molton <spyro@f2s.com>");
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("platform:tmio-mmc");
diff --git a/drivers/mmc/host/tmio_mmc.h b/drivers/mmc/host/tmio_mmc.h
new file mode 100644
index 000000000000..9e647a06054f
--- /dev/null
+++ b/drivers/mmc/host/tmio_mmc.h
@@ -0,0 +1,194 @@
+/* Definitons for use with the tmio_mmc.c
+ *
+ * (c) 2004 Ian Molton <spyro@f2s.com>
+ * (c) 2007 Ian Molton <spyro@f2s.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+#define CNF_CMD     0x04
+#define CNF_CTL_BASE   0x10
+#define CNF_INT_PIN  0x3d
+#define CNF_STOP_CLK_CTL 0x40
+#define CNF_GCLK_CTL 0x41
+#define CNF_SD_CLK_MODE 0x42
+#define CNF_PIN_STATUS 0x44
+#define CNF_PWR_CTL_1 0x48
+#define CNF_PWR_CTL_2 0x49
+#define CNF_PWR_CTL_3 0x4a
+#define CNF_CARD_DETECT_MODE 0x4c
+#define CNF_SD_SLOT 0x50
+#define CNF_EXT_GCLK_CTL_1 0xf0
+#define CNF_EXT_GCLK_CTL_2 0xf1
+#define CNF_EXT_GCLK_CTL_3 0xf9
+#define CNF_SD_LED_EN_1 0xfa
+#define CNF_SD_LED_EN_2 0xfe
+
+#define   SDCREN 0x2   /* Enable access to MMC CTL regs. (flag in COMMAND_REG)*/
+
+#define CTL_SD_CMD 0x00
+#define CTL_ARG_REG 0x04
+#define CTL_STOP_INTERNAL_ACTION 0x08
+#define CTL_XFER_BLK_COUNT 0xa
+#define CTL_RESPONSE 0x0c
+#define CTL_STATUS 0x1c
+#define CTL_IRQ_MASK 0x20
+#define CTL_SD_CARD_CLK_CTL 0x24
+#define CTL_SD_XFER_LEN 0x26
+#define CTL_SD_MEM_CARD_OPT 0x28
+#define CTL_SD_ERROR_DETAIL_STATUS 0x2c
+#define CTL_SD_DATA_PORT 0x30
+#define CTL_TRANSACTION_CTL 0x34
+#define CTL_RESET_SD 0xe0
+#define CTL_SDIO_REGS 0x100
+#define CTL_CLK_AND_WAIT_CTL 0x138
+#define CTL_RESET_SDIO 0x1e0
+
+/* Definitions for values the CTRL_STATUS register can take. */
+#define TMIO_STAT_CMDRESPEND    0x00000001
+#define TMIO_STAT_DATAEND       0x00000004
+#define TMIO_STAT_CARD_REMOVE   0x00000008
+#define TMIO_STAT_CARD_INSERT   0x00000010
+#define TMIO_STAT_SIGSTATE      0x00000020
+#define TMIO_STAT_WRPROTECT     0x00000080
+#define TMIO_STAT_CARD_REMOVE_A 0x00000100
+#define TMIO_STAT_CARD_INSERT_A 0x00000200
+#define TMIO_STAT_SIGSTATE_A    0x00000400
+#define TMIO_STAT_CMD_IDX_ERR   0x00010000
+#define TMIO_STAT_CRCFAIL       0x00020000
+#define TMIO_STAT_STOPBIT_ERR   0x00040000
+#define TMIO_STAT_DATATIMEOUT   0x00080000
+#define TMIO_STAT_RXOVERFLOW    0x00100000
+#define TMIO_STAT_TXUNDERRUN    0x00200000
+#define TMIO_STAT_CMDTIMEOUT    0x00400000
+#define TMIO_STAT_RXRDY         0x01000000
+#define TMIO_STAT_TXRQ          0x02000000
+#define TMIO_STAT_ILL_FUNC      0x20000000
+#define TMIO_STAT_CMD_BUSY      0x40000000
+#define TMIO_STAT_ILL_ACCESS    0x80000000
+
+/* Define some IRQ masks */
+/* This is the mask used at reset by the chip */
+#define TMIO_MASK_ALL           0x837f031d
+#define TMIO_MASK_READOP  (TMIO_STAT_RXRDY | TMIO_STAT_DATAEND | \
+		TMIO_STAT_CARD_REMOVE | TMIO_STAT_CARD_INSERT)
+#define TMIO_MASK_WRITEOP (TMIO_STAT_TXRQ | TMIO_STAT_DATAEND | \
+		TMIO_STAT_CARD_REMOVE | TMIO_STAT_CARD_INSERT)
+#define TMIO_MASK_CMD     (TMIO_STAT_CMDRESPEND | TMIO_STAT_CMDTIMEOUT | \
+		TMIO_STAT_CARD_REMOVE | TMIO_STAT_CARD_INSERT)
+#define TMIO_MASK_IRQ     (TMIO_MASK_READOP | TMIO_MASK_WRITEOP | TMIO_MASK_CMD)
+
+#define enable_mmc_irqs(ctl, i) \
+	do { \
+		u32 mask;\
+		mask  = tmio_ioread32((ctl) + CTL_IRQ_MASK); \
+		mask &= ~((i) & TMIO_MASK_IRQ); \
+		tmio_iowrite32(mask, (ctl) + CTL_IRQ_MASK); \
+	} while (0)
+
+#define disable_mmc_irqs(ctl, i) \
+	do { \
+		u32 mask;\
+		mask  = tmio_ioread32((ctl) + CTL_IRQ_MASK); \
+		mask |= ((i) & TMIO_MASK_IRQ); \
+		tmio_iowrite32(mask, (ctl) + CTL_IRQ_MASK); \
+	} while (0)
+
+#define ack_mmc_irqs(ctl, i) \
+	do { \
+		u32 mask;\
+		mask  = tmio_ioread32((ctl) + CTL_STATUS); \
+		mask &= ~((i) & TMIO_MASK_IRQ); \
+		tmio_iowrite32(mask, (ctl) + CTL_STATUS); \
+	} while (0)
+
+
+struct tmio_mmc_host {
+	void __iomem *cnf;
+	void __iomem *ctl;
+	struct mmc_command      *cmd;
+	struct mmc_request      *mrq;
+	struct mmc_data         *data;
+	struct mmc_host         *mmc;
+	int                     irq;
+
+	/* pio related stuff */
+	struct scatterlist      *sg_ptr;
+	unsigned int            sg_len;
+	unsigned int            sg_off;
+};
+
+#include <linux/scatterlist.h>
+#include <linux/blkdev.h>
+
+static inline void tmio_mmc_init_sg(struct tmio_mmc_host *host,
+	struct mmc_data *data)
+{
+	host->sg_len = data->sg_len;
+	host->sg_ptr = data->sg;
+	host->sg_off = 0;
+}
+
+static inline int tmio_mmc_next_sg(struct tmio_mmc_host *host)
+{
+	host->sg_ptr = sg_next(host->sg_ptr);
+	host->sg_off = 0;
+	return --host->sg_len;
+}
+
+static inline char *tmio_mmc_kmap_atomic(struct tmio_mmc_host *host,
+	unsigned long *flags)
+{
+	struct scatterlist *sg = host->sg_ptr;
+
+	local_irq_save(*flags);
+	return kmap_atomic(sg_page(sg), KM_BIO_SRC_IRQ) + sg->offset;
+}
+
+static inline void tmio_mmc_kunmap_atomic(struct tmio_mmc_host *host,
+	unsigned long *flags)
+{
+	kunmap_atomic(sg_page(host->sg_ptr), KM_BIO_SRC_IRQ);
+	local_irq_restore(*flags);
+}
+
+#ifdef CONFIG_MMC_DEBUG
+
+#define STATUS_TO_TEXT(a) \
+	do { \
+		if (status & TMIO_STAT_##a) \
+			printf(#a); \
+	} while (0)
+
+void debug_status(u32 status)
+{
+	printk(KERN_DEBUG "status: %08x = ", status);
+	STATUS_TO_TEXT(CARD_REMOVE);
+	STATUS_TO_TEXT(CARD_INSERT);
+	STATUS_TO_TEXT(SIGSTATE);
+	STATUS_TO_TEXT(WRPROTECT);
+	STATUS_TO_TEXT(CARD_REMOVE_A);
+	STATUS_TO_TEXT(CARD_INSERT_A);
+	STATUS_TO_TEXT(SIGSTATE_A);
+	STATUS_TO_TEXT(CMD_IDX_ERR);
+	STATUS_TO_TEXT(STOPBIT_ERR);
+	STATUS_TO_TEXT(ILL_FUNC);
+	STATUS_TO_TEXT(CMD_BUSY);
+	STATUS_TO_TEXT(CMDRESPEND);
+	STATUS_TO_TEXT(DATAEND);
+	STATUS_TO_TEXT(CRCFAIL);
+	STATUS_TO_TEXT(DATATIMEOUT);
+	STATUS_TO_TEXT(CMDTIMEOUT);
+	STATUS_TO_TEXT(RXOVERFLOW);
+	STATUS_TO_TEXT(TXUNDERRUN);
+	STATUS_TO_TEXT(RXRDY);
+	STATUS_TO_TEXT(TXRQ);
+	STATUS_TO_TEXT(ILL_ACCESS);
+	printk("\n");
+}
+
+#else
+#define pr_debug_status(s)  do { } while (0)
+#endif
diff --git a/drivers/mtd/Kconfig b/drivers/mtd/Kconfig
index eed06d068fd1..14f11f8b9e5f 100644
--- a/drivers/mtd/Kconfig
+++ b/drivers/mtd/Kconfig
@@ -1,5 +1,3 @@
-# $Id: Kconfig,v 1.11 2005/11/07 11:14:19 gleixner Exp $
-
 menuconfig MTD
 	tristate "Memory Technology Device (MTD) support"
 	depends on HAS_IOMEM
diff --git a/drivers/mtd/afs.c b/drivers/mtd/afs.c
index 52d51eb91c16..d072ca5be689 100644
--- a/drivers/mtd/afs.c
+++ b/drivers/mtd/afs.c
@@ -21,8 +21,6 @@
    This is access code for flashes using ARM's flash partitioning
    standards.
 
-   $Id: afs.c,v 1.15 2005/11/07 11:14:19 gleixner Exp $
-
 ======================================================================*/
 
 #include <linux/module.h>
diff --git a/drivers/mtd/chips/cfi_cmdset_0001.c b/drivers/mtd/chips/cfi_cmdset_0001.c
index fcd1aeccdf93..5f1b472137a0 100644
--- a/drivers/mtd/chips/cfi_cmdset_0001.c
+++ b/drivers/mtd/chips/cfi_cmdset_0001.c
@@ -4,8 +4,6 @@
  *
  * (C) 2000 Red Hat. GPL'd
  *
- * $Id: cfi_cmdset_0001.c,v 1.186 2005/11/23 22:07:52 nico Exp $
- *
  *
  * 10/10/2000	Nicolas Pitre <nico@cam.org>
  * 	- completely revamped method functions so they are aware and
@@ -50,6 +48,8 @@
 #define I82802AC	0x00ac
 #define MANUFACTURER_ST         0x0020
 #define M50LPW080       0x002F
+#define M50FLW080A	0x0080
+#define M50FLW080B	0x0081
 #define AT49BV640D	0x02de
 
 static int cfi_intelext_read (struct mtd_info *, loff_t, size_t, size_t *, u_char *);
@@ -204,7 +204,7 @@ static void fixup_intel_strataflash(struct mtd_info *mtd, void* param)
 {
 	struct map_info *map = mtd->priv;
 	struct cfi_private *cfi = map->fldrv_priv;
-	struct cfi_pri_amdstd *extp = cfi->cmdset_priv;
+	struct cfi_pri_intelext *extp = cfi->cmdset_priv;
 
 	printk(KERN_WARNING "cfi_cmdset_0001: Suspend "
 	                    "erase on write disabled.\n");
@@ -301,6 +301,8 @@ static struct cfi_fixup jedec_fixup_table[] = {
 	{ MANUFACTURER_INTEL, I82802AB,   fixup_use_fwh_lock, NULL, },
 	{ MANUFACTURER_INTEL, I82802AC,   fixup_use_fwh_lock, NULL, },
 	{ MANUFACTURER_ST,    M50LPW080,  fixup_use_fwh_lock, NULL, },
+	{ MANUFACTURER_ST,    M50FLW080A, fixup_use_fwh_lock, NULL, },
+	{ MANUFACTURER_ST,    M50FLW080B, fixup_use_fwh_lock, NULL, },
 	{ 0, 0, NULL, NULL }
 };
 static struct cfi_fixup fixup_table[] = {
@@ -1147,7 +1149,7 @@ static int inval_cache_and_wait_for_operation(
 	struct cfi_private *cfi = map->fldrv_priv;
 	map_word status, status_OK = CMD(0x80);
 	int chip_state = chip->state;
-	unsigned int timeo, sleep_time;
+	unsigned int timeo, sleep_time, reset_timeo;
 
 	spin_unlock(chip->mutex);
 	if (inval_len)
@@ -1158,6 +1160,7 @@ static int inval_cache_and_wait_for_operation(
 	timeo = chip_op_time * 8;
 	if (!timeo)
 		timeo = 500000;
+	reset_timeo = timeo;
 	sleep_time = chip_op_time / 2;
 
 	for (;;) {
@@ -1199,6 +1202,12 @@ static int inval_cache_and_wait_for_operation(
 			remove_wait_queue(&chip->wq, &wait);
 			spin_lock(chip->mutex);
 		}
+		if (chip->erase_suspended || chip->write_suspended)  {
+			/* Suspend has occured while sleep: reset timeout */
+			timeo = reset_timeo;
+			chip->erase_suspended = 0;
+			chip->write_suspended = 0;
+		}
 	}
 
 	/* Done and happy. */
diff --git a/drivers/mtd/chips/cfi_cmdset_0002.c b/drivers/mtd/chips/cfi_cmdset_0002.c
index f7fcc6389533..a972cc6be436 100644
--- a/drivers/mtd/chips/cfi_cmdset_0002.c
+++ b/drivers/mtd/chips/cfi_cmdset_0002.c
@@ -16,9 +16,6 @@
  * Occasionally maintained by Thayne Harbaugh tharbaugh at lnxi dot com
  *
  * This code is GPL
- *
- * $Id: cfi_cmdset_0002.c,v 1.122 2005/11/07 11:14:22 gleixner Exp $
- *
  */
 
 #include <linux/module.h>
diff --git a/drivers/mtd/chips/cfi_cmdset_0020.c b/drivers/mtd/chips/cfi_cmdset_0020.c
index 1b720cc571f3..d4714dd9f7ab 100644
--- a/drivers/mtd/chips/cfi_cmdset_0020.c
+++ b/drivers/mtd/chips/cfi_cmdset_0020.c
@@ -4,8 +4,6 @@
  *
  * (C) 2000 Red Hat. GPL'd
  *
- * $Id: cfi_cmdset_0020.c,v 1.22 2005/11/07 11:14:22 gleixner Exp $
- *
  * 10/10/2000	Nicolas Pitre <nico@cam.org>
  * 	- completely revamped method functions so they are aware and
  * 	  independent of the flash geometry (buswidth, interleave, etc.)
diff --git a/drivers/mtd/chips/cfi_probe.c b/drivers/mtd/chips/cfi_probe.c
index a4463a91ce31..c418e92e1d92 100644
--- a/drivers/mtd/chips/cfi_probe.c
+++ b/drivers/mtd/chips/cfi_probe.c
@@ -1,7 +1,6 @@
 /*
    Common Flash Interface probe code.
    (C) 2000 Red Hat. GPL'd.
-   $Id: cfi_probe.c,v 1.86 2005/11/29 14:48:31 gleixner Exp $
 */
 
 #include <linux/module.h>
diff --git a/drivers/mtd/chips/cfi_util.c b/drivers/mtd/chips/cfi_util.c
index 72e0022a47bf..0ee457018016 100644
--- a/drivers/mtd/chips/cfi_util.c
+++ b/drivers/mtd/chips/cfi_util.c
@@ -6,9 +6,6 @@
  * Copyright (C) 2003 STMicroelectronics Limited
  *
  * This code is covered by the GPL.
- *
- * $Id: cfi_util.c,v 1.10 2005/11/07 11:14:23 gleixner Exp $
- *
  */
 
 #include <linux/module.h>
diff --git a/drivers/mtd/chips/chipreg.c b/drivers/mtd/chips/chipreg.c
index 2174c97549f0..c85760968227 100644
--- a/drivers/mtd/chips/chipreg.c
+++ b/drivers/mtd/chips/chipreg.c
@@ -1,6 +1,4 @@
 /*
- * $Id: chipreg.c,v 1.17 2004/11/16 18:29:00 dwmw2 Exp $
- *
  * Registration for chip drivers
  *
  */
diff --git a/drivers/mtd/chips/gen_probe.c b/drivers/mtd/chips/gen_probe.c
index d338b8c92780..f061885b2812 100644
--- a/drivers/mtd/chips/gen_probe.c
+++ b/drivers/mtd/chips/gen_probe.c
@@ -2,7 +2,6 @@
  * Routines common to all CFI-type probes.
  * (C) 2001-2003 Red Hat, Inc.
  * GPL'd
- * $Id: gen_probe.c,v 1.24 2005/11/07 11:14:23 gleixner Exp $
  */
 
 #include <linux/kernel.h>
@@ -71,8 +70,8 @@ static struct cfi_private *genprobe_ident_chips(struct map_info *map, struct chi
 	   interleave and device type, etc. */
 	if (!genprobe_new_chip(map, cp, &cfi)) {
 		/* The probe didn't like it */
-		printk(KERN_DEBUG "%s: Found no %s device at location zero\n",
-		       cp->name, map->name);
+		pr_debug("%s: Found no %s device at location zero\n",
+			 cp->name, map->name);
 		return NULL;
 	}
 
diff --git a/drivers/mtd/chips/jedec_probe.c b/drivers/mtd/chips/jedec_probe.c
index aa07575eb288..f84ab6182148 100644
--- a/drivers/mtd/chips/jedec_probe.c
+++ b/drivers/mtd/chips/jedec_probe.c
@@ -1,7 +1,6 @@
 /*
    Common Flash Interface probe code.
    (C) 2000 Red Hat. GPL'd.
-   $Id: jedec_probe.c,v 1.66 2005/11/07 11:14:23 gleixner Exp $
    See JEDEC (http://www.jedec.org/) standard JESD21C (section 3.5)
    for the standard this probe goes back to.
 
@@ -26,6 +25,7 @@
 /* Manufacturers */
 #define MANUFACTURER_AMD	0x0001
 #define MANUFACTURER_ATMEL	0x001f
+#define MANUFACTURER_EON	0x001c
 #define MANUFACTURER_FUJITSU	0x0004
 #define MANUFACTURER_HYUNDAI	0x00AD
 #define MANUFACTURER_INTEL	0x0089
@@ -37,10 +37,11 @@
 #define MANUFACTURER_ST		0x0020
 #define MANUFACTURER_TOSHIBA	0x0098
 #define MANUFACTURER_WINBOND	0x00da
+#define CONTINUATION_CODE	0x007f
 
 
 /* AMD */
-#define AM29DL800BB	0x22C8
+#define AM29DL800BB	0x22CB
 #define AM29DL800BT	0x224A
 
 #define AM29F800BB	0x2258
@@ -58,6 +59,8 @@
 #define AM29LV040B	0x004F
 #define AM29F032B	0x0041
 #define AM29F002T	0x00B0
+#define AM29SL800DB	0x226B
+#define AM29SL800DT	0x22EA
 
 /* Atmel */
 #define AT49BV512	0x0003
@@ -67,6 +70,10 @@
 #define AT49BV32X	0x00C8
 #define AT49BV32XT	0x00C9
 
+/* Eon */
+#define EN29SL800BB	0x226B
+#define EN29SL800BT	0x22EA
+
 /* Fujitsu */
 #define MBM29F040C	0x00A4
 #define MBM29F800BA	0x2258
@@ -141,6 +148,8 @@
 #define M50FW080	0x002D
 #define M50FW016	0x002E
 #define M50LPW080       0x002F
+#define M50FLW080A	0x0080
+#define M50FLW080B	0x0081
 
 /* SST */
 #define SST29EE020	0x0010
@@ -191,6 +200,7 @@ enum uaddr {
 	MTD_UADDR_0x0555_0x0AAA,
 	MTD_UADDR_0x5555_0x2AAA,
 	MTD_UADDR_0x0AAA_0x0555,
+	MTD_UADDR_0xAAAA_0x5555,
 	MTD_UADDR_DONT_CARE,		/* Requires an arbitrary address */
 	MTD_UADDR_UNNECESSARY,		/* Does not require any address */
 };
@@ -238,6 +248,11 @@ static const struct unlock_addr  unlock_addrs[] = {
 		.addr2 = 0x0555
 	},
 
+	[MTD_UADDR_0xAAAA_0x5555] = {
+		.addr1 = 0xaaaa,
+		.addr2 = 0x5555
+	},
+
 	[MTD_UADDR_DONT_CARE] = {
 		.addr1 = 0x0000,      /* Doesn't matter which address */
 		.addr2 = 0x0000       /* is used - must be last entry */
@@ -522,6 +537,36 @@ static const struct amd_flash_info jedec_table[] = {
 			ERASEINFO(0x04000,1),
 		}
 	}, {
+		.mfr_id		= MANUFACTURER_AMD,
+		.dev_id		= AM29SL800DT,
+		.name		= "AMD AM29SL800DT",
+		.devtypes	= CFI_DEVICETYPE_X16|CFI_DEVICETYPE_X8,
+		.uaddr		= MTD_UADDR_0x0AAA_0x0555,
+		.dev_size	= SIZE_1MiB,
+		.cmd_set	= P_ID_AMD_STD,
+		.nr_regions	= 4,
+		.regions	= {
+			ERASEINFO(0x10000,15),
+			ERASEINFO(0x08000,1),
+			ERASEINFO(0x02000,2),
+			ERASEINFO(0x04000,1),
+		}
+	}, {
+		.mfr_id		= MANUFACTURER_AMD,
+		.dev_id		= AM29SL800DB,
+		.name		= "AMD AM29SL800DB",
+		.devtypes	= CFI_DEVICETYPE_X16|CFI_DEVICETYPE_X8,
+		.uaddr		= MTD_UADDR_0x0AAA_0x0555,
+		.dev_size	= SIZE_1MiB,
+		.cmd_set	= P_ID_AMD_STD,
+		.nr_regions	= 4,
+		.regions	= {
+			ERASEINFO(0x04000,1),
+			ERASEINFO(0x02000,2),
+			ERASEINFO(0x08000,1),
+			ERASEINFO(0x10000,15),
+		}
+	}, {
 		.mfr_id		= MANUFACTURER_ATMEL,
 		.dev_id		= AT49BV512,
 		.name		= "Atmel AT49BV512",
@@ -599,6 +644,36 @@ static const struct amd_flash_info jedec_table[] = {
 			ERASEINFO(0x02000,8)
 		}
 	}, {
+		.mfr_id		= MANUFACTURER_EON,
+		.dev_id		= EN29SL800BT,
+		.name		= "Eon EN29SL800BT",
+		.devtypes	= CFI_DEVICETYPE_X16|CFI_DEVICETYPE_X8,
+		.uaddr		= MTD_UADDR_0x0AAA_0x0555,
+		.dev_size	= SIZE_1MiB,
+		.cmd_set	= P_ID_AMD_STD,
+		.nr_regions	= 4,
+		.regions	= {
+			ERASEINFO(0x10000,15),
+			ERASEINFO(0x08000,1),
+			ERASEINFO(0x02000,2),
+			ERASEINFO(0x04000,1),
+		}
+	}, {
+		.mfr_id		= MANUFACTURER_EON,
+		.dev_id		= EN29SL800BB,
+		.name		= "Eon EN29SL800BB",
+		.devtypes	= CFI_DEVICETYPE_X16|CFI_DEVICETYPE_X8,
+		.uaddr		= MTD_UADDR_0x0AAA_0x0555,
+		.dev_size	= SIZE_1MiB,
+		.cmd_set	= P_ID_AMD_STD,
+		.nr_regions	= 4,
+		.regions	= {
+			ERASEINFO(0x04000,1),
+			ERASEINFO(0x02000,2),
+			ERASEINFO(0x08000,1),
+			ERASEINFO(0x10000,15),
+		}
+	}, {
 		.mfr_id		= MANUFACTURER_FUJITSU,
 		.dev_id		= MBM29F040C,
 		.name		= "Fujitsu MBM29F040C",
@@ -1392,8 +1467,8 @@ static const struct amd_flash_info jedec_table[] = {
 		.mfr_id		= MANUFACTURER_SST,     /* should be CFI */
 		.dev_id		= SST39LF160,
 		.name		= "SST 39LF160",
-		.devtypes	= CFI_DEVICETYPE_X16|CFI_DEVICETYPE_X8,
-		.uaddr		= MTD_UADDR_0x5555_0x2AAA,	/* ???? */
+		.devtypes	= CFI_DEVICETYPE_X16,
+		.uaddr		= MTD_UADDR_0xAAAA_0x5555,
 		.dev_size	= SIZE_2MiB,
 		.cmd_set	= P_ID_AMD_STD,
 		.nr_regions	= 2,
@@ -1405,8 +1480,8 @@ static const struct amd_flash_info jedec_table[] = {
 		.mfr_id		= MANUFACTURER_SST,     /* should be CFI */
 		.dev_id		= SST39VF1601,
 		.name		= "SST 39VF1601",
-		.devtypes	= CFI_DEVICETYPE_X16|CFI_DEVICETYPE_X8,
-		.uaddr		= MTD_UADDR_0x5555_0x2AAA,	/* ???? */
+		.devtypes	= CFI_DEVICETYPE_X16,
+		.uaddr		= MTD_UADDR_0xAAAA_0x5555,
 		.dev_size	= SIZE_2MiB,
 		.cmd_set	= P_ID_AMD_STD,
 		.nr_regions	= 2,
@@ -1590,6 +1665,36 @@ static const struct amd_flash_info jedec_table[] = {
 		.nr_regions	= 1,
 		.regions	= {
 			ERASEINFO(0x10000,16),
+		},
+	}, {
+		.mfr_id		= MANUFACTURER_ST,
+		.dev_id		= M50FLW080A,
+		.name		= "ST M50FLW080A",
+		.devtypes	= CFI_DEVICETYPE_X8,
+		.uaddr		= MTD_UADDR_UNNECESSARY,
+		.dev_size	= SIZE_1MiB,
+		.cmd_set	= P_ID_INTEL_EXT,
+		.nr_regions	= 4,
+		.regions	= {
+			ERASEINFO(0x1000,16),
+			ERASEINFO(0x10000,13),
+			ERASEINFO(0x1000,16),
+			ERASEINFO(0x1000,16),
+		}
+	}, {
+		.mfr_id		= MANUFACTURER_ST,
+		.dev_id		= M50FLW080B,
+		.name		= "ST M50FLW080B",
+		.devtypes	= CFI_DEVICETYPE_X8,
+		.uaddr		= MTD_UADDR_UNNECESSARY,
+		.dev_size	= SIZE_1MiB,
+		.cmd_set	= P_ID_INTEL_EXT,
+		.nr_regions	= 4,
+		.regions	= {
+			ERASEINFO(0x1000,16),
+			ERASEINFO(0x1000,16),
+			ERASEINFO(0x10000,13),
+			ERASEINFO(0x1000,16),
 		}
 	}, {
 		.mfr_id		= MANUFACTURER_TOSHIBA,
@@ -1696,9 +1801,21 @@ static inline u32 jedec_read_mfr(struct map_info *map, uint32_t base,
 {
 	map_word result;
 	unsigned long mask;
-	u32 ofs = cfi_build_cmd_addr(0, cfi_interleave(cfi), cfi->device_type);
-	mask = (1 << (cfi->device_type * 8)) -1;
-	result = map_read(map, base + ofs);
+	int bank = 0;
+
+	/* According to JEDEC "Standard Manufacturer's Identification Code"
+	 * (http://www.jedec.org/download/search/jep106W.pdf)
+	 * several first banks can contain 0x7f instead of actual ID
+	 */
+	do {
+		uint32_t ofs = cfi_build_cmd_addr(0 + (bank << 8),
+						  cfi_interleave(cfi),
+						  cfi->device_type);
+		mask = (1 << (cfi->device_type * 8)) - 1;
+		result = map_read(map, base + ofs);
+		bank++;
+	} while ((result.x[0] & mask) == CONTINUATION_CODE);
+
 	return result.x[0] & mask;
 }
 
diff --git a/drivers/mtd/chips/map_absent.c b/drivers/mtd/chips/map_absent.c
index fc478c0f93f5..494d30d0631a 100644
--- a/drivers/mtd/chips/map_absent.c
+++ b/drivers/mtd/chips/map_absent.c
@@ -1,7 +1,6 @@
 /*
  * Common code to handle absent "placeholder" devices
  * Copyright 2001 Resilience Corporation <ebrower@resilience.com>
- * $Id: map_absent.c,v 1.6 2005/11/07 11:14:23 gleixner Exp $
  *
  * This map driver is used to allocate "placeholder" MTD
  * devices on systems that have socketed/removable media.
diff --git a/drivers/mtd/chips/map_ram.c b/drivers/mtd/chips/map_ram.c
index 5cb6d5263661..072dd8abf33a 100644
--- a/drivers/mtd/chips/map_ram.c
+++ b/drivers/mtd/chips/map_ram.c
@@ -1,7 +1,6 @@
 /*
  * Common code to handle map devices which are simple RAM
  * (C) 2000 Red Hat. GPL'd.
- * $Id: map_ram.c,v 1.22 2005/01/05 18:05:12 dwmw2 Exp $
  */
 
 #include <linux/module.h>
diff --git a/drivers/mtd/chips/map_rom.c b/drivers/mtd/chips/map_rom.c
index cb27f855074c..821d0ed6bae3 100644
--- a/drivers/mtd/chips/map_rom.c
+++ b/drivers/mtd/chips/map_rom.c
@@ -1,7 +1,6 @@
 /*
  * Common code to handle map devices which are simple ROM
  * (C) 2000 Red Hat. GPL'd.
- * $Id: map_rom.c,v 1.23 2005/01/05 18:05:12 dwmw2 Exp $
  */
 
 #include <linux/module.h>
diff --git a/drivers/mtd/cmdlinepart.c b/drivers/mtd/cmdlinepart.c
index e472a0e9de9d..71bc07f149b7 100644
--- a/drivers/mtd/cmdlinepart.c
+++ b/drivers/mtd/cmdlinepart.c
@@ -1,6 +1,4 @@
 /*
- * $Id: cmdlinepart.c,v 1.19 2005/11/07 11:14:19 gleixner Exp $
- *
  * Read flash partition table from command line
  *
  * Copyright 2002 SYSGO Real-Time Solutions GmbH
@@ -308,7 +306,7 @@ static int parse_cmdline_partitions(struct mtd_info *master,
 	unsigned long offset;
 	int i;
 	struct cmdline_mtd_partition *part;
-	char *mtd_id = master->name;
+	const char *mtd_id = master->name;
 
 	/* parse command line */
 	if (!cmdline_parsed)
diff --git a/drivers/mtd/devices/Kconfig b/drivers/mtd/devices/Kconfig
index 35ed1103dbb2..9c613f06623c 100644
--- a/drivers/mtd/devices/Kconfig
+++ b/drivers/mtd/devices/Kconfig
@@ -1,5 +1,4 @@
 # drivers/mtd/maps/Kconfig
-# $Id: Kconfig,v 1.18 2005/11/07 11:14:24 gleixner Exp $
 
 menu "Self-contained MTD device drivers"
 	depends on MTD!=n
diff --git a/drivers/mtd/devices/Makefile b/drivers/mtd/devices/Makefile
index 0f788d5c4bf8..0993d5cf3923 100644
--- a/drivers/mtd/devices/Makefile
+++ b/drivers/mtd/devices/Makefile
@@ -1,7 +1,6 @@
 #
 # linux/drivers/devices/Makefile
 #
-# $Id: Makefile.common,v 1.7 2004/12/22 17:51:15 joern Exp $
 
 obj-$(CONFIG_MTD_DOC2000)	+= doc2000.o
 obj-$(CONFIG_MTD_DOC2001)	+= doc2001.o
diff --git a/drivers/mtd/devices/block2mtd.c b/drivers/mtd/devices/block2mtd.c
index 7b72a1b36115..91fbba767635 100644
--- a/drivers/mtd/devices/block2mtd.c
+++ b/drivers/mtd/devices/block2mtd.c
@@ -1,6 +1,4 @@
 /*
- * $Id: block2mtd.c,v 1.30 2005/11/29 14:48:32 gleixner Exp $
- *
  * block2mtd.c - create an mtd from a block device
  *
  * Copyright (C) 2001,2002	Simon Evans <spse@secret.org.uk>
@@ -20,9 +18,6 @@
 #include <linux/mutex.h>
 #include <linux/mount.h>
 
-#define VERSION "$Revision: 1.30 $"
-
-
 #define ERROR(fmt, args...) printk(KERN_ERR "block2mtd: " fmt "\n" , ## args)
 #define INFO(fmt, args...) printk(KERN_INFO "block2mtd: " fmt "\n" , ## args)
 
@@ -453,7 +448,6 @@ MODULE_PARM_DESC(block2mtd, "Device to use. \"block2mtd=<dev>[,<erasesize>]\"");
 static int __init block2mtd_init(void)
 {
 	int ret = 0;
-	INFO("version " VERSION);
 
 #ifndef MODULE
 	if (strlen(block2mtd_paramline))
diff --git a/drivers/mtd/devices/doc2000.c b/drivers/mtd/devices/doc2000.c
index 846989f292e3..50de839c77a9 100644
--- a/drivers/mtd/devices/doc2000.c
+++ b/drivers/mtd/devices/doc2000.c
@@ -3,8 +3,6 @@
  * Linux driver for Disk-On-Chip 2000 and Millennium
  * (c) 1999 Machine Vision Holdings, Inc.
  * (c) 1999, 2000 David Woodhouse <dwmw2@infradead.org>
- *
- * $Id: doc2000.c,v 1.67 2005/11/07 11:14:24 gleixner Exp $
  */
 
 #include <linux/kernel.h>
diff --git a/drivers/mtd/devices/doc2001.c b/drivers/mtd/devices/doc2001.c
index 6413efc045e0..e32c568c1145 100644
--- a/drivers/mtd/devices/doc2001.c
+++ b/drivers/mtd/devices/doc2001.c
@@ -3,8 +3,6 @@
  * Linux driver for Disk-On-Chip Millennium
  * (c) 1999 Machine Vision Holdings, Inc.
  * (c) 1999, 2000 David Woodhouse <dwmw2@infradead.org>
- *
- * $Id: doc2001.c,v 1.49 2005/11/07 11:14:24 gleixner Exp $
  */
 
 #include <linux/kernel.h>
diff --git a/drivers/mtd/devices/doc2001plus.c b/drivers/mtd/devices/doc2001plus.c
index 83be3461658f..d853f891b586 100644
--- a/drivers/mtd/devices/doc2001plus.c
+++ b/drivers/mtd/devices/doc2001plus.c
@@ -6,8 +6,6 @@
  * (c) 1999 Machine Vision Holdings, Inc.
  * (c) 1999, 2000 David Woodhouse <dwmw2@infradead.org>
  *
- * $Id: doc2001plus.c,v 1.14 2005/11/07 11:14:24 gleixner Exp $
- *
  * Released under GPL
  */
 
diff --git a/drivers/mtd/devices/docecc.c b/drivers/mtd/devices/docecc.c
index fd8a8daba3a8..874e51b110a2 100644
--- a/drivers/mtd/devices/docecc.c
+++ b/drivers/mtd/devices/docecc.c
@@ -7,8 +7,6 @@
  * Author: Fabrice Bellard (fabrice.bellard@netgem.com)
  * Copyright (C) 2000 Netgem S.A.
  *
- * $Id: docecc.c,v 1.7 2005/11/07 11:14:25 gleixner Exp $
- *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation; either version 2 of the License, or
diff --git a/drivers/mtd/devices/docprobe.c b/drivers/mtd/devices/docprobe.c
index d8cc94ec4e50..6e62922942b1 100644
--- a/drivers/mtd/devices/docprobe.c
+++ b/drivers/mtd/devices/docprobe.c
@@ -4,9 +4,6 @@
 /* (C) 1999 Machine Vision Holdings, Inc.			*/
 /* (C) 1999-2003 David Woodhouse <dwmw2@infradead.org>		*/
 
-/* $Id: docprobe.c,v 1.46 2005/11/07 11:14:25 gleixner Exp $	*/
-
-
 
 /* DOC_PASSIVE_PROBE:
    In order to ensure that the BIOS checksum is correct at boot time, and
@@ -79,8 +76,6 @@ static unsigned long __initdata doc_locations[] = {
 	0xe0000, 0xe2000, 0xe4000, 0xe6000,
 	0xe8000, 0xea000, 0xec000, 0xee000,
 #endif /*  CONFIG_MTD_DOCPROBE_HIGH */
-#elif defined(__PPC__)
-	0xe4000000,
 #else
 #warning Unknown architecture for DiskOnChip. No default probe locations defined
 #endif
diff --git a/drivers/mtd/devices/lart.c b/drivers/mtd/devices/lart.c
index 1d324e5c412d..f4bda4cee495 100644
--- a/drivers/mtd/devices/lart.c
+++ b/drivers/mtd/devices/lart.c
@@ -2,8 +2,6 @@
 /*
  * MTD driver for the 28F160F3 Flash Memory (non-CFI) on LART.
  *
- * $Id: lart.c,v 1.9 2005/11/07 11:14:25 gleixner Exp $
- *
  * Author: Abraham vd Merwe <abraham@2d3d.co.za>
  *
  * Copyright (c) 2001, 2d3D, Inc.
diff --git a/drivers/mtd/devices/m25p80.c b/drivers/mtd/devices/m25p80.c
index b402269301f6..b35c3333e210 100644
--- a/drivers/mtd/devices/m25p80.c
+++ b/drivers/mtd/devices/m25p80.c
@@ -33,6 +33,7 @@
 /* Flash opcodes. */
 #define	OPCODE_WREN		0x06	/* Write enable */
 #define	OPCODE_RDSR		0x05	/* Read status register */
+#define	OPCODE_WRSR		0x01	/* Write status register 1 byte */
 #define	OPCODE_NORM_READ	0x03	/* Read data bytes (low frequency) */
 #define	OPCODE_FAST_READ	0x0b	/* Read data bytes (high frequency) */
 #define	OPCODE_PP		0x02	/* Page program (up to 256 bytes) */
@@ -112,6 +113,17 @@ static int read_sr(struct m25p *flash)
 	return val;
 }
 
+/*
+ * Write status register 1 byte
+ * Returns negative if error occurred.
+ */
+static int write_sr(struct m25p *flash, u8 val)
+{
+	flash->command[0] = OPCODE_WRSR;
+	flash->command[1] = val;
+
+	return spi_write(flash->spi, flash->command, 2);
+}
 
 /*
  * Set write enable latch with Write Enable command.
@@ -589,6 +601,16 @@ static int __devinit m25p_probe(struct spi_device *spi)
 	mutex_init(&flash->lock);
 	dev_set_drvdata(&spi->dev, flash);
 
+	/*
+	 * Atmel serial flash tend to power up
+	 * with the software protection bits set
+	 */
+
+	if (info->jedec_id >> 16 == 0x1f) {
+		write_enable(flash);
+		write_sr(flash, 0);
+	}
+
 	if (data && data->name)
 		flash->mtd.name = data->name;
 	else
diff --git a/drivers/mtd/devices/ms02-nv.c b/drivers/mtd/devices/ms02-nv.c
index 9cff119a2024..6a9a24a80a6d 100644
--- a/drivers/mtd/devices/ms02-nv.c
+++ b/drivers/mtd/devices/ms02-nv.c
@@ -5,8 +5,6 @@
  *	modify it under the terms of the GNU General Public License
  *	as published by the Free Software Foundation; either version
  *	2 of the License, or (at your option) any later version.
- *
- *	$Id: ms02-nv.c,v 1.11 2005/11/14 13:41:47 macro Exp $
  */
 
 #include <linux/init.h>
diff --git a/drivers/mtd/devices/ms02-nv.h b/drivers/mtd/devices/ms02-nv.h
index 8a6eef7cfee3..04deafd3a771 100644
--- a/drivers/mtd/devices/ms02-nv.h
+++ b/drivers/mtd/devices/ms02-nv.h
@@ -9,8 +9,6 @@
  *	modify it under the terms of the GNU General Public License
  *	as published by the Free Software Foundation; either version
  *	2 of the License, or (at your option) any later version.
- *
- *	$Id: ms02-nv.h,v 1.3 2003/08/19 09:25:36 dwmw2 Exp $
  */
 
 #include <linux/ioport.h>
diff --git a/drivers/mtd/devices/mtd_dataflash.c b/drivers/mtd/devices/mtd_dataflash.c
index b35e4813a3a5..8bd0dea6885f 100644
--- a/drivers/mtd/devices/mtd_dataflash.c
+++ b/drivers/mtd/devices/mtd_dataflash.c
@@ -15,6 +15,8 @@
 #include <linux/delay.h>
 #include <linux/device.h>
 #include <linux/mutex.h>
+#include <linux/err.h>
+
 #include <linux/spi/spi.h>
 #include <linux/spi/flash.h>
 
@@ -82,7 +84,7 @@
 
 
 struct dataflash {
-	u8			command[4];
+	uint8_t			command[4];
 	char			name[24];
 
 	unsigned		partitioned:1;
@@ -150,7 +152,7 @@ static int dataflash_erase(struct mtd_info *mtd, struct erase_info *instr)
 	struct spi_transfer	x = { .tx_dma = 0, };
 	struct spi_message	msg;
 	unsigned		blocksize = priv->page_size << 3;
-	u8			*command;
+	uint8_t			*command;
 
 	DEBUG(MTD_DEBUG_LEVEL2, "%s: erase addr=0x%x len 0x%x\n",
 			spi->dev.bus_id,
@@ -182,8 +184,8 @@ static int dataflash_erase(struct mtd_info *mtd, struct erase_info *instr)
 		pageaddr = pageaddr << priv->page_offset;
 
 		command[0] = do_block ? OP_ERASE_BLOCK : OP_ERASE_PAGE;
-		command[1] = (u8)(pageaddr >> 16);
-		command[2] = (u8)(pageaddr >> 8);
+		command[1] = (uint8_t)(pageaddr >> 16);
+		command[2] = (uint8_t)(pageaddr >> 8);
 		command[3] = 0;
 
 		DEBUG(MTD_DEBUG_LEVEL3, "ERASE %s: (%x) %x %x %x [%i]\n",
@@ -234,7 +236,7 @@ static int dataflash_read(struct mtd_info *mtd, loff_t from, size_t len,
 	struct spi_transfer	x[2] = { { .tx_dma = 0, }, };
 	struct spi_message	msg;
 	unsigned int		addr;
-	u8			*command;
+	uint8_t			*command;
 	int			status;
 
 	DEBUG(MTD_DEBUG_LEVEL2, "%s: read 0x%x..0x%x\n",
@@ -274,9 +276,9 @@ static int dataflash_read(struct mtd_info *mtd, loff_t from, size_t len,
 	 * fewer "don't care" bytes.  Both buffers stay unchanged.
 	 */
 	command[0] = OP_READ_CONTINUOUS;
-	command[1] = (u8)(addr >> 16);
-	command[2] = (u8)(addr >> 8);
-	command[3] = (u8)(addr >> 0);
+	command[1] = (uint8_t)(addr >> 16);
+	command[2] = (uint8_t)(addr >> 8);
+	command[3] = (uint8_t)(addr >> 0);
 	/* plus 4 "don't care" bytes */
 
 	status = spi_sync(priv->spi, &msg);
@@ -311,7 +313,7 @@ static int dataflash_write(struct mtd_info *mtd, loff_t to, size_t len,
 	size_t			remaining = len;
 	u_char			*writebuf = (u_char *) buf;
 	int			status = -EINVAL;
-	u8			*command;
+	uint8_t			*command;
 
 	DEBUG(MTD_DEBUG_LEVEL2, "%s: write 0x%x..0x%x\n",
 		spi->dev.bus_id, (unsigned)to, (unsigned)(to + len));
@@ -487,7 +489,8 @@ add_dataflash(struct spi_device *spi, char *name,
 	device->write = dataflash_write;
 	device->priv = priv;
 
-	dev_info(&spi->dev, "%s (%d KBytes)\n", name, device->size/1024);
+	dev_info(&spi->dev, "%s (%d KBytes) pagesize %d bytes\n",
+			name, DIV_ROUND_UP(device->size, 1024), pagesize);
 	dev_set_drvdata(&spi->dev, priv);
 
 	if (mtd_has_partitions()) {
@@ -516,12 +519,135 @@ add_dataflash(struct spi_device *spi, char *name,
 	return add_mtd_device(device) == 1 ? -ENODEV : 0;
 }
 
+struct flash_info {
+	char		*name;
+
+	/* JEDEC id has a high byte of zero plus three data bytes:
+	 * the manufacturer id, then a two byte device id.
+	 */
+	uint32_t	jedec_id;
+
+	/* The size listed here is what works with OP_ERASE_PAGE. */
+	unsigned	nr_pages;
+	uint16_t	pagesize;
+	uint16_t	pageoffset;
+
+	uint16_t	flags;
+#define SUP_POW2PS	0x0002		/* supports 2^N byte pages */
+#define IS_POW2PS	0x0001		/* uses 2^N byte pages */
+};
+
+static struct flash_info __devinitdata dataflash_data [] = {
+
+	/*
+	 * NOTE:  chips with SUP_POW2PS (rev D and up) need two entries,
+	 * one with IS_POW2PS and the other without.  The entry with the
+	 * non-2^N byte page size can't name exact chip revisions without
+	 * losing backwards compatibility for cmdlinepart.
+	 *
+	 * These newer chips also support 128-byte security registers (with
+	 * 64 bytes one-time-programmable) and software write-protection.
+	 */
+	{ "AT45DB011B",  0x1f2200, 512, 264, 9, SUP_POW2PS},
+	{ "at45db011d",  0x1f2200, 512, 256, 8, SUP_POW2PS | IS_POW2PS},
+
+	{ "AT45DB021B",  0x1f2300, 1024, 264, 9, SUP_POW2PS},
+	{ "at45db021d",  0x1f2300, 1024, 256, 8, SUP_POW2PS | IS_POW2PS},
+
+	{ "AT45DB041x",  0x1f2400, 2048, 264, 9, SUP_POW2PS},
+	{ "at45db041d",  0x1f2400, 2048, 256, 8, SUP_POW2PS | IS_POW2PS},
+
+	{ "AT45DB081B",  0x1f2500, 4096, 264, 9, SUP_POW2PS},
+	{ "at45db081d",  0x1f2500, 4096, 256, 8, SUP_POW2PS | IS_POW2PS},
+
+	{ "AT45DB161x",  0x1f2600, 4096, 528, 10, SUP_POW2PS},
+	{ "at45db161d",  0x1f2600, 4096, 512, 9, SUP_POW2PS | IS_POW2PS},
+
+	{ "AT45DB321x",  0x1f2700, 8192, 528, 10, 0},		/* rev C */
+
+	{ "AT45DB321x",  0x1f2701, 8192, 528, 10, SUP_POW2PS},
+	{ "at45db321d",  0x1f2701, 8192, 512, 9, SUP_POW2PS | IS_POW2PS},
+
+	{ "AT45DB642x",  0x1f2800, 8192, 1056, 11, SUP_POW2PS},
+	{ "at45db642d",  0x1f2800, 8192, 1024, 10, SUP_POW2PS | IS_POW2PS},
+};
+
+static struct flash_info *__devinit jedec_probe(struct spi_device *spi)
+{
+	int			tmp;
+	uint8_t			code = OP_READ_ID;
+	uint8_t			id[3];
+	uint32_t		jedec;
+	struct flash_info	*info;
+	int status;
+
+	/* JEDEC also defines an optional "extended device information"
+	 * string for after vendor-specific data, after the three bytes
+	 * we use here.  Supporting some chips might require using it.
+	 *
+	 * If the vendor ID isn't Atmel's (0x1f), assume this call failed.
+	 * That's not an error; only rev C and newer chips handle it, and
+	 * only Atmel sells these chips.
+	 */
+	tmp = spi_write_then_read(spi, &code, 1, id, 3);
+	if (tmp < 0) {
+		DEBUG(MTD_DEBUG_LEVEL0, "%s: error %d reading JEDEC ID\n",
+			spi->dev.bus_id, tmp);
+		return ERR_PTR(tmp);
+	}
+	if (id[0] != 0x1f)
+		return NULL;
+
+	jedec = id[0];
+	jedec = jedec << 8;
+	jedec |= id[1];
+	jedec = jedec << 8;
+	jedec |= id[2];
+
+	for (tmp = 0, info = dataflash_data;
+			tmp < ARRAY_SIZE(dataflash_data);
+			tmp++, info++) {
+		if (info->jedec_id == jedec) {
+			DEBUG(MTD_DEBUG_LEVEL1, "%s: OTP, sector protect%s\n",
+				dev_name(&spi->dev),
+				(info->flags & SUP_POW2PS)
+					? ", binary pagesize" : ""
+				);
+			if (info->flags & SUP_POW2PS) {
+				status = dataflash_status(spi);
+				if (status < 0) {
+					DEBUG(MTD_DEBUG_LEVEL1,
+						"%s: status error %d\n",
+						dev_name(&spi->dev), status);
+					return ERR_PTR(status);
+				}
+				if (status & 0x1) {
+					if (info->flags & IS_POW2PS)
+						return info;
+				} else {
+					if (!(info->flags & IS_POW2PS))
+						return info;
+				}
+			}
+		}
+	}
+
+	/*
+	 * Treat other chips as errors ... we won't know the right page
+	 * size (it might be binary) even when we can tell which density
+	 * class is involved (legacy chip id scheme).
+	 */
+	dev_warn(&spi->dev, "JEDEC id %06x not handled\n", jedec);
+	return ERR_PTR(-ENODEV);
+}
+
 /*
- * Detect and initialize DataFlash device:
+ * Detect and initialize DataFlash device, using JEDEC IDs on newer chips
+ * or else the ID code embedded in the status bits:
  *
  *   Device      Density         ID code          #Pages PageSize  Offset
  *   AT45DB011B  1Mbit   (128K)  xx0011xx (0x0c)    512    264      9
- *   AT45DB021B  2Mbit   (256K)  xx0101xx (0x14)   1025    264      9
+ *   AT45DB021B  2Mbit   (256K)  xx0101xx (0x14)   1024    264      9
  *   AT45DB041B  4Mbit   (512K)  xx0111xx (0x1c)   2048    264      9
  *   AT45DB081B  8Mbit   (1M)    xx1001xx (0x24)   4096    264      9
  *   AT45DB0161B 16Mbit  (2M)    xx1011xx (0x2c)   4096    528     10
@@ -532,7 +658,24 @@ add_dataflash(struct spi_device *spi, char *name,
 static int __devinit dataflash_probe(struct spi_device *spi)
 {
 	int status;
+	struct flash_info	*info;
 
+	/*
+	 * Try to detect dataflash by JEDEC ID.
+	 * If it succeeds we know we have either a C or D part.
+	 * D will support power of 2 pagesize option.
+	 */
+	info = jedec_probe(spi);
+	if (IS_ERR(info))
+		return PTR_ERR(info);
+	if (info != NULL)
+		return add_dataflash(spi, info->name, info->nr_pages,
+				 info->pagesize, info->pageoffset);
+
+	/*
+	 * Older chips support only legacy commands, identifing
+	 * capacity using bits in the status byte.
+	 */
 	status = dataflash_status(spi);
 	if (status <= 0 || status == 0xff) {
 		DEBUG(MTD_DEBUG_LEVEL1, "%s: status error %d\n",
@@ -551,7 +694,7 @@ static int __devinit dataflash_probe(struct spi_device *spi)
 		status = add_dataflash(spi, "AT45DB011B", 512, 264, 9);
 		break;
 	case 0x14:	/* 0 1 0 1 x x */
-		status = add_dataflash(spi, "AT45DB021B", 1025, 264, 9);
+		status = add_dataflash(spi, "AT45DB021B", 1024, 264, 9);
 		break;
 	case 0x1c:	/* 0 1 1 1 x x */
 		status = add_dataflash(spi, "AT45DB041x", 2048, 264, 9);
diff --git a/drivers/mtd/devices/mtdram.c b/drivers/mtd/devices/mtdram.c
index 0399be178620..3aaca88847d3 100644
--- a/drivers/mtd/devices/mtdram.c
+++ b/drivers/mtd/devices/mtdram.c
@@ -1,6 +1,5 @@
 /*
  * mtdram - a test mtd device
- * $Id: mtdram.c,v 1.37 2005/04/21 03:42:11 joern Exp $
  * Author: Alexander Larsson <alex@cendio.se>
  *
  * Copyright (c) 1999 Alexander Larsson <alex@cendio.se>
diff --git a/drivers/mtd/devices/phram.c b/drivers/mtd/devices/phram.c
index c7987b1c5e01..088fbb7595b5 100644
--- a/drivers/mtd/devices/phram.c
+++ b/drivers/mtd/devices/phram.c
@@ -1,6 +1,4 @@
 /**
- * $Id: phram.c,v 1.16 2005/11/07 11:14:25 gleixner Exp $
- *
  * Copyright (c) ????		Jochen Schäuble <psionic@psionic.de>
  * Copyright (c) 2003-2004	Joern Engel <joern@wh.fh-wedel.de>
  *
diff --git a/drivers/mtd/devices/pmc551.c b/drivers/mtd/devices/pmc551.c
index bc9981749064..d38bca64bb15 100644
--- a/drivers/mtd/devices/pmc551.c
+++ b/drivers/mtd/devices/pmc551.c
@@ -1,6 +1,4 @@
 /*
- * $Id: pmc551.c,v 1.32 2005/11/07 11:14:25 gleixner Exp $
- *
  * PMC551 PCI Mezzanine Ram Device
  *
  * Author:
diff --git a/drivers/mtd/devices/slram.c b/drivers/mtd/devices/slram.c
index cb86db746f28..a425d09f35a0 100644
--- a/drivers/mtd/devices/slram.c
+++ b/drivers/mtd/devices/slram.c
@@ -1,7 +1,5 @@
 /*======================================================================
 
-  $Id: slram.c,v 1.36 2005/11/07 11:14:25 gleixner Exp $
-
   This driver provides a method to access memory not used by the kernel
   itself (i.e. if the kernel commandline mem=xxx is used). To actually
   use slram at least mtdblock or mtdchar is required (for block or
diff --git a/drivers/mtd/ftl.c b/drivers/mtd/ftl.c
index 5c29872184e6..f34f20c78911 100644
--- a/drivers/mtd/ftl.c
+++ b/drivers/mtd/ftl.c
@@ -1,5 +1,4 @@
 /* This version ported to the Linux-MTD system by dwmw2@infradead.org
- * $Id: ftl.c,v 1.59 2005/11/29 14:48:31 gleixner Exp $
  *
  * Fixes: Arnaldo Carvalho de Melo <acme@conectiva.com.br>
  * - fixes some leaks on failure in build_maps and ftl_notify_add, cleanups
@@ -1078,8 +1077,6 @@ static struct mtd_blktrans_ops ftl_tr = {
 
 static int init_ftl(void)
 {
-	DEBUG(0, "$Id: ftl.c,v 1.59 2005/11/29 14:48:31 gleixner Exp $\n");
-
 	return register_mtd_blktrans(&ftl_tr);
 }
 
diff --git a/drivers/mtd/inftlcore.c b/drivers/mtd/inftlcore.c
index b0e396504e67..c4f9d3378b24 100644
--- a/drivers/mtd/inftlcore.c
+++ b/drivers/mtd/inftlcore.c
@@ -7,8 +7,6 @@
  * (c) 1999 Machine Vision Holdings, Inc.
  * Author: David Woodhouse <dwmw2@infradead.org>
  *
- * $Id: inftlcore.c,v 1.19 2005/11/07 11:14:20 gleixner Exp $
- *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation; either version 2 of the License, or
@@ -953,9 +951,6 @@ static struct mtd_blktrans_ops inftl_tr = {
 
 static int __init init_inftl(void)
 {
-	printk(KERN_INFO "INFTL: inftlcore.c $Revision: 1.19 $, "
-		"inftlmount.c %s\n", inftlmountrev);
-
 	return register_mtd_blktrans(&inftl_tr);
 }
 
diff --git a/drivers/mtd/inftlmount.c b/drivers/mtd/inftlmount.c
index c551d2f0779c..9113628ed1ef 100644
--- a/drivers/mtd/inftlmount.c
+++ b/drivers/mtd/inftlmount.c
@@ -8,8 +8,6 @@
  * Author: Fabrice Bellard (fabrice.bellard@netgem.com)
  * Copyright (C) 2000 Netgem S.A.
  *
- * $Id: inftlmount.c,v 1.18 2005/11/07 11:14:20 gleixner Exp $
- *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation; either version 2 of the License, or
@@ -39,8 +37,6 @@
 #include <linux/mtd/inftl.h>
 #include <linux/mtd/compatmac.h>
 
-char inftlmountrev[]="$Revision: 1.18 $";
-
 /*
  * find_boot_record: Find the INFTL Media Header and its Spare copy which
  *	contains the various device information of the INFTL partition and
diff --git a/drivers/mtd/maps/Kconfig b/drivers/mtd/maps/Kconfig
index d2fbc2964523..df8e00bba07b 100644
--- a/drivers/mtd/maps/Kconfig
+++ b/drivers/mtd/maps/Kconfig
@@ -1,5 +1,4 @@
 # drivers/mtd/maps/Kconfig
-# $Id: Kconfig,v 1.61 2005/11/07 11:14:26 gleixner Exp $
 
 menu "Mapping drivers for chip access"
 	depends on MTD!=n
@@ -510,6 +509,17 @@ config MTD_PCMCIA_ANONYMOUS
 
 	  If unsure, say N.
 
+config MTD_BFIN_ASYNC
+	tristate "Blackfin BF533-STAMP Flash Chip Support"
+	depends on BFIN533_STAMP && MTD_CFI
+	select MTD_PARTITIONS
+	default y
+	help
+	  Map driver which allows for simultaneous utilization of
+	  ethernet and CFI parallel flash.
+
+	  If compiled as a module, it will be called bfin-async-flash.
+
 config MTD_UCLINUX
 	tristate "Generic uClinux RAM/ROM filesystem support"
 	depends on MTD_PARTITIONS && !MMU
@@ -539,24 +549,6 @@ config MTD_DMV182
         help
           Map driver for Dy-4 SVME/DMV-182 board.
 
-config MTD_BAST
-	tristate "Map driver for Simtec BAST (EB2410ITX) or Thorcom VR1000"
-	depends on ARCH_BAST || MACH_VR1000
-	select MTD_PARTITIONS
-	select MTD_MAP_BANK_WIDTH_16
-	select MTD_JEDECPROBE
-	help
-	  Map driver for NOR flash on the Simtec BAST (EB2410ITX), or the
-	  Thorcom VR1000
-
-	  Note, this driver *cannot* over-ride the WP link on the
-	  board, or currently detect the state of the link.
-
-config MTD_BAST_MAXSIZE
-	int "Maximum size for BAST flash area (MiB)"
-	depends on MTD_BAST
-	default "4"
-
 config MTD_SHARP_SL
 	tristate "ROM mapped on Sharp SL Series"
 	depends on ARCH_PXA
diff --git a/drivers/mtd/maps/Makefile b/drivers/mtd/maps/Makefile
index c6ce8673dab2..6cda6df973e5 100644
--- a/drivers/mtd/maps/Makefile
+++ b/drivers/mtd/maps/Makefile
@@ -1,7 +1,6 @@
 #
 # linux/drivers/maps/Makefile
 #
-# $Id: Makefile.common,v 1.34 2005/11/07 11:14:26 gleixner Exp $
 
 ifeq ($(CONFIG_MTD_COMPLEX_MAPPINGS),y)
 obj-$(CONFIG_MTD)		+= map_funcs.o
@@ -10,7 +9,6 @@ endif
 # Chip mappings
 obj-$(CONFIG_MTD_CDB89712)	+= cdb89712.o
 obj-$(CONFIG_MTD_ARM_INTEGRATOR)+= integrator-flash.o
-obj-$(CONFIG_MTD_BAST)		+= bast-flash.o
 obj-$(CONFIG_MTD_CFI_FLAGADM)	+= cfi_flagadm.o
 obj-$(CONFIG_MTD_DC21285)	+= dc21285.o
 obj-$(CONFIG_MTD_DILNETPC)	+= dilnetpc.o
@@ -66,3 +64,4 @@ obj-$(CONFIG_MTD_SHARP_SL)	+= sharpsl-flash.o
 obj-$(CONFIG_MTD_PLATRAM)	+= plat-ram.o
 obj-$(CONFIG_MTD_OMAP_NOR)	+= omap_nor.o
 obj-$(CONFIG_MTD_INTEL_VR_NOR)	+= intel_vr_nor.o
+obj-$(CONFIG_MTD_BFIN_ASYNC)	+= bfin-async-flash.o
diff --git a/drivers/mtd/maps/amd76xrom.c b/drivers/mtd/maps/amd76xrom.c
index 728aed6ad722..d1eec7d3243f 100644
--- a/drivers/mtd/maps/amd76xrom.c
+++ b/drivers/mtd/maps/amd76xrom.c
@@ -2,12 +2,10 @@
  * amd76xrom.c
  *
  * Normal mappings of chips in physical memory
- * $Id: amd76xrom.c,v 1.21 2005/11/07 11:14:26 gleixner Exp $
  */
 
 #include <linux/module.h>
 #include <linux/types.h>
-#include <linux/version.h>
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <asm/io.h>
diff --git a/drivers/mtd/maps/autcpu12-nvram.c b/drivers/mtd/maps/autcpu12-nvram.c
index 7ed3424dd959..53664188fc47 100644
--- a/drivers/mtd/maps/autcpu12-nvram.c
+++ b/drivers/mtd/maps/autcpu12-nvram.c
@@ -2,8 +2,6 @@
  * NV-RAM memory access on autcpu12
  * (C) 2002 Thomas Gleixner (gleixner@autronix.de)
  *
- * $Id: autcpu12-nvram.c,v 1.9 2005/11/07 11:14:26 gleixner Exp $
- *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation; either version 2 of the License, or
@@ -27,8 +25,8 @@
 #include <linux/init.h>
 #include <asm/io.h>
 #include <asm/sizes.h>
-#include <asm/hardware.h>
-#include <asm/arch/autcpu12.h>
+#include <mach/hardware.h>
+#include <mach/autcpu12.h>
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/map.h>
 #include <linux/mtd/partitions.h>
diff --git a/drivers/mtd/maps/bast-flash.c b/drivers/mtd/maps/bast-flash.c
deleted file mode 100644
index 1f492062f8ca..000000000000
--- a/drivers/mtd/maps/bast-flash.c
+++ /dev/null
@@ -1,226 +0,0 @@
-/* linux/drivers/mtd/maps/bast-flash.c
- *
- * Copyright (c) 2004-2005 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * Simtec Bast (EB2410ITX) NOR MTD Mapping driver
- *
- * Changelog:
- *	20-Sep-2004  BJD  Initial version
- *	17-Jan-2005  BJD  Add whole device if no partitions found
- *
- * $Id: bast-flash.c,v 1.5 2005/11/07 11:14:26 gleixner Exp $
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
-*/
-
-#include <linux/module.h>
-#include <linux/types.h>
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/string.h>
-#include <linux/ioport.h>
-#include <linux/device.h>
-#include <linux/slab.h>
-#include <linux/platform_device.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/map.h>
-#include <linux/mtd/partitions.h>
-
-#include <asm/io.h>
-#include <asm/mach/flash.h>
-
-#include <asm/arch/map.h>
-#include <asm/arch/bast-map.h>
-#include <asm/arch/bast-cpld.h>
-
-#ifdef CONFIG_MTD_BAST_MAXSIZE
-#define AREA_MAXSIZE (CONFIG_MTD_BAST_MAXSIZE * SZ_1M)
-#else
-#define AREA_MAXSIZE (32 * SZ_1M)
-#endif
-
-#define PFX "bast-flash: "
-
-struct bast_flash_info {
-	struct mtd_info		*mtd;
-	struct map_info		 map;
-	struct mtd_partition	*partitions;
-	struct resource		*area;
-};
-
-static const char *probes[] = { "RedBoot", "cmdlinepart", NULL };
-
-static void bast_flash_setrw(int to)
-{
-	unsigned int val;
-	unsigned long flags;
-
-	local_irq_save(flags);
-	val = __raw_readb(BAST_VA_CTRL3);
-
-	if (to)
-		val |= BAST_CPLD_CTRL3_ROMWEN;
-	else
-		val &= ~BAST_CPLD_CTRL3_ROMWEN;
-
-	pr_debug("new cpld ctrl3=%02x\n", val);
-
-	__raw_writeb(val, BAST_VA_CTRL3);
-	local_irq_restore(flags);
-}
-
-static int bast_flash_remove(struct platform_device *pdev)
-{
-	struct bast_flash_info *info = platform_get_drvdata(pdev);
-
-	platform_set_drvdata(pdev, NULL);
-
-	if (info == NULL)
-		return 0;
-
-	if (info->map.virt != NULL)
-		iounmap(info->map.virt);
-
-	if (info->mtd) {
-		del_mtd_partitions(info->mtd);
-		map_destroy(info->mtd);
-	}
-
-	kfree(info->partitions);
-
-	if (info->area) {
-		release_resource(info->area);
-		kfree(info->area);
-	}
-
-	kfree(info);
-
-	return 0;
-}
-
-static int bast_flash_probe(struct platform_device *pdev)
-{
-	struct bast_flash_info *info;
-	struct resource *res;
-	int err = 0;
-
-	info = kmalloc(sizeof(*info), GFP_KERNEL);
-	if (info == NULL) {
-		printk(KERN_ERR PFX "no memory for flash info\n");
-		err = -ENOMEM;
-		goto exit_error;
-	}
-
-	memzero(info, sizeof(*info));
-	platform_set_drvdata(pdev, info);
-
-	res = pdev->resource;  /* assume that the flash has one resource */
-
-	info->map.phys = res->start;
-	info->map.size = res->end - res->start + 1;
-	info->map.name = pdev->dev.bus_id;
-	info->map.bankwidth = 2;
-
-	if (info->map.size > AREA_MAXSIZE)
-		info->map.size = AREA_MAXSIZE;
-
-	pr_debug("%s: area %08lx, size %ld\n", __func__,
-		 info->map.phys, info->map.size);
-
-	info->area = request_mem_region(res->start, info->map.size,
-					pdev->name);
-	if (info->area == NULL) {
-		printk(KERN_ERR PFX "cannot reserve flash memory region\n");
-		err = -ENOENT;
-		goto exit_error;
-	}
-
-	info->map.virt = ioremap(res->start, info->map.size);
-	pr_debug("%s: virt at %08x\n", __func__, (int)info->map.virt);
-
-	if (info->map.virt == 0) {
-		printk(KERN_ERR PFX "failed to ioremap() region\n");
-		err = -EIO;
-		goto exit_error;
-	}
-
-	simple_map_init(&info->map);
-
-	/* enable the write to the flash area */
-
-	bast_flash_setrw(1);
-
-	/* probe for the device(s) */
-
-	info->mtd = do_map_probe("jedec_probe", &info->map);
-	if (info->mtd == NULL)
-		info->mtd = do_map_probe("cfi_probe", &info->map);
-
-	if (info->mtd == NULL) {
-		printk(KERN_ERR PFX "map_probe() failed\n");
-		err = -ENXIO;
-		goto exit_error;
-	}
-
-	/* mark ourselves as the owner */
-	info->mtd->owner = THIS_MODULE;
-
-	err = parse_mtd_partitions(info->mtd, probes, &info->partitions, 0);
-	if (err > 0) {
-		err = add_mtd_partitions(info->mtd, info->partitions, err);
-		if (err)
-			printk(KERN_ERR PFX "cannot add/parse partitions\n");
-	} else {
-		err = add_mtd_device(info->mtd);
-	}
-
-	if (err == 0)
-		return 0;
-
-	/* fall through to exit error */
-
- exit_error:
-	bast_flash_remove(pdev);
-	return err;
-}
-
-static struct platform_driver bast_flash_driver = {
-	.probe		= bast_flash_probe,
-	.remove		= bast_flash_remove,
-	.driver		= {
-		.name	= "bast-nor",
-		.owner	= THIS_MODULE,
-	},
-};
-
-static int __init bast_flash_init(void)
-{
-	printk("BAST NOR-Flash Driver, (c) 2004 Simtec Electronics\n");
-	return platform_driver_register(&bast_flash_driver);
-}
-
-static void __exit bast_flash_exit(void)
-{
-	platform_driver_unregister(&bast_flash_driver);
-}
-
-module_init(bast_flash_init);
-module_exit(bast_flash_exit);
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Ben Dooks <ben@simtec.co.uk>");
-MODULE_DESCRIPTION("BAST MTD Map driver");
-MODULE_ALIAS("platform:bast-nor");
diff --git a/drivers/mtd/maps/bfin-async-flash.c b/drivers/mtd/maps/bfin-async-flash.c
new file mode 100644
index 000000000000..6fec86aaed7e
--- /dev/null
+++ b/drivers/mtd/maps/bfin-async-flash.c
@@ -0,0 +1,219 @@
+/*
+ * drivers/mtd/maps/bfin-async-flash.c
+ *
+ * Handle the case where flash memory and ethernet mac/phy are
+ * mapped onto the same async bank.  The BF533-STAMP does this
+ * for example.  All board-specific configuration goes in your
+ * board resources file.
+ *
+ * Copyright 2000 Nicolas Pitre <nico@cam.org>
+ * Copyright 2005-2008 Analog Devices Inc.
+ *
+ * Enter bugs at http://blackfin.uclinux.org/
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/map.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/physmap.h>
+#include <linux/platform_device.h>
+#include <linux/types.h>
+
+#include <asm/blackfin.h>
+#include <linux/gpio.h>
+#include <linux/io.h>
+#include <asm/unaligned.h>
+
+#define pr_devinit(fmt, args...) ({ static const __devinitconst char __fmt[] = fmt; printk(__fmt, ## args); })
+
+#define DRIVER_NAME "bfin-async-flash"
+
+struct async_state {
+	struct mtd_info *mtd;
+	struct map_info map;
+	int enet_flash_pin;
+	uint32_t flash_ambctl0, flash_ambctl1;
+	uint32_t save_ambctl0, save_ambctl1;
+	unsigned long irq_flags;
+};
+
+static void switch_to_flash(struct async_state *state)
+{
+	local_irq_save(state->irq_flags);
+
+	gpio_set_value(state->enet_flash_pin, 0);
+
+	state->save_ambctl0 = bfin_read_EBIU_AMBCTL0();
+	state->save_ambctl1 = bfin_read_EBIU_AMBCTL1();
+	bfin_write_EBIU_AMBCTL0(state->flash_ambctl0);
+	bfin_write_EBIU_AMBCTL1(state->flash_ambctl1);
+	SSYNC();
+}
+
+static void switch_back(struct async_state *state)
+{
+	bfin_write_EBIU_AMBCTL0(state->save_ambctl0);
+	bfin_write_EBIU_AMBCTL1(state->save_ambctl1);
+	SSYNC();
+
+	gpio_set_value(state->enet_flash_pin, 1);
+
+	local_irq_restore(state->irq_flags);
+}
+
+static map_word bfin_read(struct map_info *map, unsigned long ofs)
+{
+	struct async_state *state = (struct async_state *)map->map_priv_1;
+	uint16_t word;
+	map_word test;
+
+	switch_to_flash(state);
+
+	word = readw(map->virt + ofs);
+
+	switch_back(state);
+
+	test.x[0] = word;
+	return test;
+}
+
+static void bfin_copy_from(struct map_info *map, void *to, unsigned long from, ssize_t len)
+{
+	struct async_state *state = (struct async_state *)map->map_priv_1;
+
+	switch_to_flash(state);
+
+	memcpy(to, map->virt + from, len);
+
+	switch_back(state);
+}
+
+static void bfin_write(struct map_info *map, map_word d1, unsigned long ofs)
+{
+	struct async_state *state = (struct async_state *)map->map_priv_1;
+	uint16_t d;
+
+	d = d1.x[0];
+
+	switch_to_flash(state);
+
+	writew(d, map->virt + ofs);
+	SSYNC();
+
+	switch_back(state);
+}
+
+static void bfin_copy_to(struct map_info *map, unsigned long to, const void *from, ssize_t len)
+{
+	struct async_state *state = (struct async_state *)map->map_priv_1;
+
+	switch_to_flash(state);
+
+	memcpy(map->virt + to, from, len);
+	SSYNC();
+
+	switch_back(state);
+}
+
+#ifdef CONFIG_MTD_PARTITIONS
+static const char *part_probe_types[] = { "cmdlinepart", "RedBoot", NULL };
+#endif
+
+static int __devinit bfin_flash_probe(struct platform_device *pdev)
+{
+	int ret;
+	struct physmap_flash_data *pdata = pdev->dev.platform_data;
+	struct resource *memory = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	struct resource *flash_ambctl = platform_get_resource(pdev, IORESOURCE_MEM, 1);
+	struct async_state *state;
+
+	state = kzalloc(sizeof(*state), GFP_KERNEL);
+	if (!state)
+		return -ENOMEM;
+
+	state->map.name       = DRIVER_NAME;
+	state->map.read       = bfin_read;
+	state->map.copy_from  = bfin_copy_from;
+	state->map.write      = bfin_write;
+	state->map.copy_to    = bfin_copy_to;
+	state->map.bankwidth  = pdata->width;
+	state->map.size       = memory->end - memory->start + 1;
+	state->map.virt       = (void __iomem *)memory->start;
+	state->map.phys       = memory->start;
+	state->map.map_priv_1 = (unsigned long)state;
+	state->enet_flash_pin = platform_get_irq(pdev, 0);
+	state->flash_ambctl0  = flash_ambctl->start;
+	state->flash_ambctl1  = flash_ambctl->end;
+
+	if (gpio_request(state->enet_flash_pin, DRIVER_NAME)) {
+		pr_devinit(KERN_ERR DRIVER_NAME ": Failed to request gpio %d\n", state->enet_flash_pin);
+		return -EBUSY;
+	}
+	gpio_direction_output(state->enet_flash_pin, 1);
+
+	pr_devinit(KERN_NOTICE DRIVER_NAME ": probing %d-bit flash bus\n", state->map.bankwidth * 8);
+	state->mtd = do_map_probe(memory->name, &state->map);
+	if (!state->mtd)
+		return -ENXIO;
+
+#ifdef CONFIG_MTD_PARTITIONS
+	ret = parse_mtd_partitions(state->mtd, part_probe_types, &pdata->parts, 0);
+	if (ret > 0) {
+		pr_devinit(KERN_NOTICE DRIVER_NAME ": Using commandline partition definition\n");
+		add_mtd_partitions(state->mtd, pdata->parts, ret);
+
+	} else if (pdata->nr_parts) {
+		pr_devinit(KERN_NOTICE DRIVER_NAME ": Using board partition definition\n");
+		add_mtd_partitions(state->mtd, pdata->parts, pdata->nr_parts);
+
+	} else
+#endif
+	{
+		pr_devinit(KERN_NOTICE DRIVER_NAME ": no partition info available, registering whole flash at once\n");
+		add_mtd_device(state->mtd);
+	}
+
+	platform_set_drvdata(pdev, state);
+
+	return 0;
+}
+
+static int __devexit bfin_flash_remove(struct platform_device *pdev)
+{
+	struct async_state *state = platform_get_drvdata(pdev);
+	gpio_free(state->enet_flash_pin);
+#ifdef CONFIG_MTD_PARTITIONS
+	del_mtd_partitions(state->mtd);
+#endif
+	map_destroy(state->mtd);
+	kfree(state);
+	return 0;
+}
+
+static struct platform_driver bfin_flash_driver = {
+	.probe		= bfin_flash_probe,
+	.remove		= __devexit_p(bfin_flash_remove),
+	.driver		= {
+		.name	= DRIVER_NAME,
+	},
+};
+
+static int __init bfin_flash_init(void)
+{
+	return platform_driver_register(&bfin_flash_driver);
+}
+module_init(bfin_flash_init);
+
+static void __exit bfin_flash_exit(void)
+{
+	platform_driver_unregister(&bfin_flash_driver);
+}
+module_exit(bfin_flash_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("MTD map driver for Blackfins with flash/ethernet on same async bank");
diff --git a/drivers/mtd/maps/cdb89712.c b/drivers/mtd/maps/cdb89712.c
index 9f17bb6c5a9d..e5059aa3c724 100644
--- a/drivers/mtd/maps/cdb89712.c
+++ b/drivers/mtd/maps/cdb89712.c
@@ -1,7 +1,6 @@
 /*
  * Flash on Cirrus CDB89712
  *
- * $Id: cdb89712.c,v 1.11 2005/11/07 11:14:26 gleixner Exp $
  */
 
 #include <linux/module.h>
@@ -10,7 +9,7 @@
 #include <linux/ioport.h>
 #include <linux/init.h>
 #include <asm/io.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/map.h>
 #include <linux/mtd/partitions.h>
diff --git a/drivers/mtd/maps/ceiva.c b/drivers/mtd/maps/ceiva.c
index 629e6e2641a8..60e68bde0fea 100644
--- a/drivers/mtd/maps/ceiva.c
+++ b/drivers/mtd/maps/ceiva.c
@@ -11,7 +11,6 @@
  *
  * (C) 2000 Nicolas Pitre <nico@cam.org>
  *
- * $Id: ceiva.c,v 1.11 2004/09/16 23:27:12 gleixner Exp $
  */
 
 #include <linux/module.h>
@@ -26,7 +25,7 @@
 #include <linux/mtd/partitions.h>
 #include <linux/mtd/concat.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/io.h>
 #include <asm/sizes.h>
diff --git a/drivers/mtd/maps/cfi_flagadm.c b/drivers/mtd/maps/cfi_flagadm.c
index 65e5ee552010..0ecc3f6d735b 100644
--- a/drivers/mtd/maps/cfi_flagadm.c
+++ b/drivers/mtd/maps/cfi_flagadm.c
@@ -1,8 +1,6 @@
 /*
  *  Copyright © 2001 Flaga hf. Medical Devices, Kári Davíðsson <kd@flaga.is>
  *
- *  $Id: cfi_flagadm.c,v 1.15 2005/11/07 11:14:26 gleixner Exp $
- *
  *  This program is free software; you can redistribute  it and/or modify it
  *  under  the terms of  the GNU General  Public License as published by the
  *  Free Software Foundation;  either version 2 of the  License, or (at your
diff --git a/drivers/mtd/maps/ck804xrom.c b/drivers/mtd/maps/ck804xrom.c
index effaf7cdefab..1a6feb4474de 100644
--- a/drivers/mtd/maps/ck804xrom.c
+++ b/drivers/mtd/maps/ck804xrom.c
@@ -9,7 +9,6 @@
 
 #include <linux/module.h>
 #include <linux/types.h>
-#include <linux/version.h>
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <asm/io.h>
diff --git a/drivers/mtd/maps/dbox2-flash.c b/drivers/mtd/maps/dbox2-flash.c
index 92a9c7fac993..e115667bf1d0 100644
--- a/drivers/mtd/maps/dbox2-flash.c
+++ b/drivers/mtd/maps/dbox2-flash.c
@@ -1,6 +1,4 @@
 /*
- * $Id: dbox2-flash.c,v 1.14 2005/11/07 11:14:26 gleixner Exp $
- *
  * D-Box 2 flash driver
  */
 
diff --git a/drivers/mtd/maps/dc21285.c b/drivers/mtd/maps/dc21285.c
index b32bb9347d71..3aa018c092f8 100644
--- a/drivers/mtd/maps/dc21285.c
+++ b/drivers/mtd/maps/dc21285.c
@@ -4,8 +4,6 @@
  * (C) 2000  Nicolas Pitre <nico@cam.org>
  *
  * This code is GPL
- *
- * $Id: dc21285.c,v 1.24 2005/11/07 11:14:26 gleixner Exp $
  */
 #include <linux/module.h>
 #include <linux/types.h>
diff --git a/drivers/mtd/maps/dilnetpc.c b/drivers/mtd/maps/dilnetpc.c
index 1c3b34ad7325..0713e3a5a22c 100644
--- a/drivers/mtd/maps/dilnetpc.c
+++ b/drivers/mtd/maps/dilnetpc.c
@@ -14,8 +14,6 @@
  * along with this program; if not, write to the Free Software
  * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA
  *
- * $Id: dilnetpc.c,v 1.20 2005/11/07 11:14:26 gleixner Exp $
- *
  * The DIL/Net PC is a tiny embedded PC board made by SSV Embedded Systems
  * featuring the AMD Elan SC410 processor. There are two variants of this
  * board: DNP/1486 and ADNP/1486. The DNP version has 2 megs of flash
diff --git a/drivers/mtd/maps/dmv182.c b/drivers/mtd/maps/dmv182.c
index e0558b0b2fe6..d171674eb2ed 100644
--- a/drivers/mtd/maps/dmv182.c
+++ b/drivers/mtd/maps/dmv182.c
@@ -4,8 +4,6 @@
  *
  * Flash map driver for the Dy4 SVME182 board
  *
- * $Id: dmv182.c,v 1.6 2005/11/07 11:14:26 gleixner Exp $
- *
  * Copyright 2003-2004, TimeSys Corporation
  *
  * Based on the SVME181 flash map, by Tom Nelson, Dot4, Inc. for TimeSys Corp.
diff --git a/drivers/mtd/maps/ebony.c b/drivers/mtd/maps/ebony.c
index 1488bb92f26f..d92b7c70d3ed 100644
--- a/drivers/mtd/maps/ebony.c
+++ b/drivers/mtd/maps/ebony.c
@@ -1,6 +1,4 @@
 /*
- * $Id: ebony.c,v 1.16 2005/11/07 11:14:26 gleixner Exp $
- *
  * Mapping for Ebony user flash
  *
  * Matt Porter <mporter@kernel.crashing.org>
diff --git a/drivers/mtd/maps/edb7312.c b/drivers/mtd/maps/edb7312.c
index 1c5b97c89685..9433738c1664 100644
--- a/drivers/mtd/maps/edb7312.c
+++ b/drivers/mtd/maps/edb7312.c
@@ -1,6 +1,4 @@
 /*
- * $Id: edb7312.c,v 1.14 2005/11/07 11:14:27 gleixner Exp $
- *
  * Handle mapping of the NOR flash on Cogent EDB7312 boards
  *
  * Copyright 2002 SYSGO Real-Time Solutions GmbH
diff --git a/drivers/mtd/maps/esb2rom.c b/drivers/mtd/maps/esb2rom.c
index aa64a4752781..bbbcdd4c8d13 100644
--- a/drivers/mtd/maps/esb2rom.c
+++ b/drivers/mtd/maps/esb2rom.c
@@ -12,7 +12,6 @@
 
 #include <linux/module.h>
 #include <linux/types.h>
-#include <linux/version.h>
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <asm/io.h>
diff --git a/drivers/mtd/maps/fortunet.c b/drivers/mtd/maps/fortunet.c
index 7c50c271651c..a8e3fde4cbd5 100644
--- a/drivers/mtd/maps/fortunet.c
+++ b/drivers/mtd/maps/fortunet.c
@@ -1,6 +1,5 @@
 /* fortunet.c memory map
  *
- * $Id: fortunet.c,v 1.11 2005/11/07 11:14:27 gleixner Exp $
  */
 
 #include <linux/module.h>
diff --git a/drivers/mtd/maps/h720x-flash.c b/drivers/mtd/maps/h720x-flash.c
index 6dde3182d64a..35fef655ccc4 100644
--- a/drivers/mtd/maps/h720x-flash.c
+++ b/drivers/mtd/maps/h720x-flash.c
@@ -2,8 +2,6 @@
  * Flash memory access on Hynix GMS30C7201/HMS30C7202 based
  * evaluation boards
  *
- * $Id: h720x-flash.c,v 1.12 2005/11/07 11:14:27 gleixner Exp $
- *
  * (C) 2002 Jungjun Kim <jungjun.kim@hynix.com>
  *     2003 Thomas Gleixner <tglx@linutronix.de>
  */
@@ -18,7 +16,7 @@
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/map.h>
 #include <linux/mtd/partitions.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 
 static struct mtd_info *mymtd;
diff --git a/drivers/mtd/maps/ichxrom.c b/drivers/mtd/maps/ichxrom.c
index 2c884c49e84a..aeb6c916e23f 100644
--- a/drivers/mtd/maps/ichxrom.c
+++ b/drivers/mtd/maps/ichxrom.c
@@ -2,7 +2,6 @@
  * ichxrom.c
  *
  * Normal mappings of chips in physical memory
- * $Id: ichxrom.c,v 1.19 2005/11/07 11:14:27 gleixner Exp $
  */
 
 #include <linux/module.h>
diff --git a/drivers/mtd/maps/impa7.c b/drivers/mtd/maps/impa7.c
index a0b4dc7155dc..2682ab51a367 100644
--- a/drivers/mtd/maps/impa7.c
+++ b/drivers/mtd/maps/impa7.c
@@ -1,6 +1,4 @@
 /*
- * $Id: impa7.c,v 1.14 2005/11/07 11:14:27 gleixner Exp $
- *
  * Handle mapping of the NOR flash on implementa A7 boards
  *
  * Copyright 2002 SYSGO Real-Time Solutions GmbH
diff --git a/drivers/mtd/maps/integrator-flash.c b/drivers/mtd/maps/integrator-flash.c
index 325c8880c437..7100ee3c7b01 100644
--- a/drivers/mtd/maps/integrator-flash.c
+++ b/drivers/mtd/maps/integrator-flash.c
@@ -22,8 +22,6 @@
    This is access code for flashes using ARM's flash partitioning
    standards.
 
-   $Id: integrator-flash.c,v 1.20 2005/11/07 11:14:27 gleixner Exp $
-
 ======================================================================*/
 
 #include <linux/module.h>
@@ -39,7 +37,7 @@
 #include <linux/mtd/partitions.h>
 
 #include <asm/mach/flash.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 #include <asm/system.h>
 
diff --git a/drivers/mtd/maps/ipaq-flash.c b/drivers/mtd/maps/ipaq-flash.c
index f27c132794c3..ed58f6a77bd9 100644
--- a/drivers/mtd/maps/ipaq-flash.c
+++ b/drivers/mtd/maps/ipaq-flash.c
@@ -4,8 +4,6 @@
  * (C) 2000 Nicolas Pitre <nico@cam.org>
  * (C) 2002 Hewlett-Packard Company <jamey.hicks@hp.com>
  * (C) 2003 Christian Pellegrin <chri@ascensit.com>, <chri@infis.univ.ts.it>: concatenation of multiple flashes
- *
- * $Id: ipaq-flash.c,v 1.5 2005/11/07 11:14:27 gleixner Exp $
  */
 
 #include <linux/module.h>
@@ -26,8 +24,8 @@
 #include <linux/mtd/concat.h>
 #endif
 
-#include <asm/hardware.h>
-#include <asm/arch-sa1100/h3600.h>
+#include <mach/hardware.h>
+#include <mach/h3600.h>
 #include <asm/io.h>
 
 
diff --git a/drivers/mtd/maps/ixp2000.c b/drivers/mtd/maps/ixp2000.c
index c8396b8574c4..dcdb1f17577d 100644
--- a/drivers/mtd/maps/ixp2000.c
+++ b/drivers/mtd/maps/ixp2000.c
@@ -1,6 +1,4 @@
 /*
- * $Id: ixp2000.c,v 1.9 2005/11/07 11:14:27 gleixner Exp $
- *
  * drivers/mtd/maps/ixp2000.c
  *
  * Mapping for the Intel XScale IXP2000 based systems
@@ -32,7 +30,7 @@
 #include <linux/mtd/partitions.h>
 
 #include <asm/io.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/mach/flash.h>
 
 #include <linux/reboot.h>
diff --git a/drivers/mtd/maps/ixp4xx.c b/drivers/mtd/maps/ixp4xx.c
index 01f19a4714b5..9c7a5fbd4e51 100644
--- a/drivers/mtd/maps/ixp4xx.c
+++ b/drivers/mtd/maps/ixp4xx.c
@@ -1,6 +1,4 @@
 /*
- * $Id: ixp4xx.c,v 1.13 2005/11/16 16:23:21 dvrabel Exp $
- *
  * drivers/mtd/maps/ixp4xx.c
  *
  * MTD Map file for IXP4XX based systems. Please do not make per-board
diff --git a/drivers/mtd/maps/l440gx.c b/drivers/mtd/maps/l440gx.c
index 67620adf4811..9e054503c4cf 100644
--- a/drivers/mtd/maps/l440gx.c
+++ b/drivers/mtd/maps/l440gx.c
@@ -1,6 +1,4 @@
 /*
- * $Id: l440gx.c,v 1.18 2005/11/07 11:14:27 gleixner Exp $
- *
  * BIOS Flash chip on Intel 440GX board.
  *
  * Bugs this currently does not work under linuxBIOS.
diff --git a/drivers/mtd/maps/map_funcs.c b/drivers/mtd/maps/map_funcs.c
index 9105e6ca0aa6..3f268370eeca 100644
--- a/drivers/mtd/maps/map_funcs.c
+++ b/drivers/mtd/maps/map_funcs.c
@@ -1,6 +1,4 @@
 /*
- * $Id: map_funcs.c,v 1.10 2005/06/06 23:04:36 tpoynor Exp $
- *
  * Out-of-line map I/O functions for simple maps when CONFIG_COMPLEX_MAPPINGS
  * is enabled.
  */
diff --git a/drivers/mtd/maps/mbx860.c b/drivers/mtd/maps/mbx860.c
index 06b118727846..706f67394b07 100644
--- a/drivers/mtd/maps/mbx860.c
+++ b/drivers/mtd/maps/mbx860.c
@@ -1,6 +1,4 @@
 /*
- * $Id: mbx860.c,v 1.9 2005/11/07 11:14:27 gleixner Exp $
- *
  * Handle mapping of the flash on MBX860 boards
  *
  * Author:	Anton Todorov
diff --git a/drivers/mtd/maps/netsc520.c b/drivers/mtd/maps/netsc520.c
index 95dcab2146ad..c0cb319b2b70 100644
--- a/drivers/mtd/maps/netsc520.c
+++ b/drivers/mtd/maps/netsc520.c
@@ -3,8 +3,6 @@
  * Copyright (C) 2001 Mark Langsdorf (mark.langsdorf@amd.com)
  *	based on sc520cdp.c by Sysgo Real-Time Solutions GmbH
  *
- * $Id: netsc520.c,v 1.14 2005/11/07 11:14:27 gleixner Exp $
- *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation; either version 2 of the License, or
diff --git a/drivers/mtd/maps/nettel.c b/drivers/mtd/maps/nettel.c
index 0c9b305a72e0..965e6c6d6ab0 100644
--- a/drivers/mtd/maps/nettel.c
+++ b/drivers/mtd/maps/nettel.c
@@ -5,8 +5,6 @@
  *
  *      (C) Copyright 2000-2001, Greg Ungerer (gerg@snapgear.com)
  *      (C) Copyright 2001-2002, SnapGear (www.snapgear.com)
- *
- *	$Id: nettel.c,v 1.12 2005/11/29 14:30:00 gleixner Exp $
  */
 
 /****************************************************************************/
diff --git a/drivers/mtd/maps/octagon-5066.c b/drivers/mtd/maps/octagon-5066.c
index a6642db3d325..43e04c1d22a9 100644
--- a/drivers/mtd/maps/octagon-5066.c
+++ b/drivers/mtd/maps/octagon-5066.c
@@ -1,4 +1,3 @@
-// $Id: octagon-5066.c,v 1.28 2005/11/07 11:14:27 gleixner Exp $
 /* ######################################################################
 
    Octagon 5066 MTD Driver.
diff --git a/drivers/mtd/maps/omap-toto-flash.c b/drivers/mtd/maps/omap-toto-flash.c
index e6e391efbeb6..0a60ebbc2175 100644
--- a/drivers/mtd/maps/omap-toto-flash.c
+++ b/drivers/mtd/maps/omap-toto-flash.c
@@ -4,8 +4,6 @@
  * jzhang@ti.com (C) 2003 Texas Instruments.
  *
  *  (C) 2002 MontVista Software, Inc.
- *
- * $Id: omap-toto-flash.c,v 1.5 2005/11/07 11:14:27 gleixner Exp $
  */
 
 #include <linux/module.h>
diff --git a/drivers/mtd/maps/omap_nor.c b/drivers/mtd/maps/omap_nor.c
index 68eec6c6c517..05f276af15da 100644
--- a/drivers/mtd/maps/omap_nor.c
+++ b/drivers/mtd/maps/omap_nor.c
@@ -43,9 +43,9 @@
 #include <linux/mtd/partitions.h>
 
 #include <asm/io.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/mach/flash.h>
-#include <asm/arch/tc.h>
+#include <mach/tc.h>
 
 #ifdef CONFIG_MTD_PARTITIONS
 static const char *part_probes[] = { /* "RedBoot", */ "cmdlinepart", NULL };
diff --git a/drivers/mtd/maps/pci.c b/drivers/mtd/maps/pci.c
index d2ab1bae9c34..5c6a25c90380 100644
--- a/drivers/mtd/maps/pci.c
+++ b/drivers/mtd/maps/pci.c
@@ -7,8 +7,6 @@
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
  *
- *  $Id: pci.c,v 1.14 2005/11/17 08:20:27 dwmw2 Exp $
- *
  * Generic PCI memory map driver.  We support the following boards:
  *  - Intel IQ80310 ATU.
  *  - Intel EBSA285 (blank rom programming mode). Tested working 27/09/2001
diff --git a/drivers/mtd/maps/pcmciamtd.c b/drivers/mtd/maps/pcmciamtd.c
index 0cc31675aeb9..90924fb00481 100644
--- a/drivers/mtd/maps/pcmciamtd.c
+++ b/drivers/mtd/maps/pcmciamtd.c
@@ -1,6 +1,4 @@
 /*
- * $Id: pcmciamtd.c,v 1.55 2005/11/07 11:14:28 gleixner Exp $
- *
  * pcmciamtd.c - MTD driver for PCMCIA flash memory cards
  *
  * Author: Simon Evans <spse@secret.org.uk>
@@ -48,7 +46,6 @@ static const int debug = 0;
 
 
 #define DRIVER_DESC	"PCMCIA Flash memory card driver"
-#define DRIVER_VERSION	"$Revision: 1.55 $"
 
 /* Size of the PCMCIA address space: 26 bits = 64 MB */
 #define MAX_PCMCIA_ADDR	0x4000000
@@ -785,7 +782,7 @@ static struct pcmcia_driver pcmciamtd_driver = {
 
 static int __init init_pcmciamtd(void)
 {
-	info(DRIVER_DESC " " DRIVER_VERSION);
+	info(DRIVER_DESC);
 
 	if(bankwidth && bankwidth != 1 && bankwidth != 2) {
 		info("bad bankwidth (%d), using default", bankwidth);
diff --git a/drivers/mtd/maps/physmap.c b/drivers/mtd/maps/physmap.c
index 183255fcfdcb..42d844f8f6bf 100644
--- a/drivers/mtd/maps/physmap.c
+++ b/drivers/mtd/maps/physmap.c
@@ -1,6 +1,4 @@
 /*
- * $Id: physmap.c,v 1.39 2005/11/29 14:49:36 gleixner Exp $
- *
  * Normal mappings of chips in physical memory
  *
  * Copyright (C) 2003 MontaVista Software Inc.
@@ -203,7 +201,19 @@ static int physmap_flash_suspend(struct platform_device *dev, pm_message_t state
 	int i;
 
 	for (i = 0; i < MAX_RESOURCES && info->mtd[i]; i++)
-		ret |= info->mtd[i]->suspend(info->mtd[i]);
+		if (info->mtd[i]->suspend) {
+			ret = info->mtd[i]->suspend(info->mtd[i]);
+			if (ret)
+				goto fail;
+		}
+
+	return 0;
+fail:
+	for (--i; i >= 0; --i)
+		if (info->mtd[i]->suspend) {
+			BUG_ON(!info->mtd[i]->resume);
+			info->mtd[i]->resume(info->mtd[i]);
+		}
 
 	return ret;
 }
@@ -214,7 +224,8 @@ static int physmap_flash_resume(struct platform_device *dev)
 	int i;
 
 	for (i = 0; i < MAX_RESOURCES && info->mtd[i]; i++)
-		info->mtd[i]->resume(info->mtd[i]);
+		if (info->mtd[i]->resume)
+			info->mtd[i]->resume(info->mtd[i]);
 
 	return 0;
 }
@@ -225,8 +236,9 @@ static void physmap_flash_shutdown(struct platform_device *dev)
 	int i;
 
 	for (i = 0; i < MAX_RESOURCES && info->mtd[i]; i++)
-		if (info->mtd[i]->suspend(info->mtd[i]) == 0)
-			info->mtd[i]->resume(info->mtd[i]);
+		if (info->mtd[i]->suspend && info->mtd[i]->resume)
+			if (info->mtd[i]->suspend(info->mtd[i]) == 0)
+				info->mtd[i]->resume(info->mtd[i]);
 }
 #else
 #define physmap_flash_suspend NULL
diff --git a/drivers/mtd/maps/plat-ram.c b/drivers/mtd/maps/plat-ram.c
index 3eb2643b2328..e7dd9c8a965e 100644
--- a/drivers/mtd/maps/plat-ram.c
+++ b/drivers/mtd/maps/plat-ram.c
@@ -6,8 +6,6 @@
  *
  * Generic platfrom device based RAM map
  *
- * $Id: plat-ram.c,v 1.7 2005/11/07 11:14:28 gleixner Exp $
- *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation; either version 2 of the License, or
diff --git a/drivers/mtd/maps/pxa2xx-flash.c b/drivers/mtd/maps/pxa2xx-flash.c
index 82113295c266..771139c5bf87 100644
--- a/drivers/mtd/maps/pxa2xx-flash.c
+++ b/drivers/mtd/maps/pxa2xx-flash.c
@@ -19,7 +19,7 @@
 #include <linux/mtd/partitions.h>
 
 #include <asm/io.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/cacheflush.h>
 
 #include <asm/mach/flash.h>
diff --git a/drivers/mtd/maps/redwood.c b/drivers/mtd/maps/redwood.c
index 4d858b3d5f82..de002eb1a7fe 100644
--- a/drivers/mtd/maps/redwood.c
+++ b/drivers/mtd/maps/redwood.c
@@ -1,6 +1,4 @@
 /*
- * $Id: redwood.c,v 1.11 2005/11/07 11:14:28 gleixner Exp $
- *
  * drivers/mtd/maps/redwood.c
  *
  * FLASH map for the IBM Redwood 4/5/6 boards.
diff --git a/drivers/mtd/maps/rpxlite.c b/drivers/mtd/maps/rpxlite.c
index 809a0c8e7aaf..14d90edb4430 100644
--- a/drivers/mtd/maps/rpxlite.c
+++ b/drivers/mtd/maps/rpxlite.c
@@ -1,6 +1,4 @@
 /*
- * $Id: rpxlite.c,v 1.22 2004/11/04 13:24:15 gleixner Exp $
- *
  * Handle mapping of the flash on the RPX Lite and CLLF boards
  */
 
diff --git a/drivers/mtd/maps/sa1100-flash.c b/drivers/mtd/maps/sa1100-flash.c
index c7d5a52a2d55..7df6bbf0e4d9 100644
--- a/drivers/mtd/maps/sa1100-flash.c
+++ b/drivers/mtd/maps/sa1100-flash.c
@@ -2,8 +2,6 @@
  * Flash memory access on SA11x0 based devices
  *
  * (C) 2000 Nicolas Pitre <nico@cam.org>
- *
- * $Id: sa1100-flash.c,v 1.51 2005/11/07 11:14:28 gleixner Exp $
  */
 #include <linux/module.h>
 #include <linux/types.h>
@@ -20,7 +18,7 @@
 #include <linux/mtd/partitions.h>
 #include <linux/mtd/concat.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 #include <asm/sizes.h>
 #include <asm/mach/flash.h>
diff --git a/drivers/mtd/maps/sbc8240.c b/drivers/mtd/maps/sbc8240.c
index b8c1331b7a04..6e1e99cd2b59 100644
--- a/drivers/mtd/maps/sbc8240.c
+++ b/drivers/mtd/maps/sbc8240.c
@@ -4,9 +4,6 @@
  * Carolyn Smith, Tektronix, Inc.
  *
  * This code is GPLed
- *
- * $Id: sbc8240.c,v 1.5 2005/11/07 11:14:28 gleixner Exp $
- *
  */
 
 /*
diff --git a/drivers/mtd/maps/sbc_gxx.c b/drivers/mtd/maps/sbc_gxx.c
index 7cc4041d096d..1b1c0b7e11ef 100644
--- a/drivers/mtd/maps/sbc_gxx.c
+++ b/drivers/mtd/maps/sbc_gxx.c
@@ -17,8 +17,6 @@
    along with this program; if not, write to the Free Software
    Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA
 
-   $Id: sbc_gxx.c,v 1.35 2005/11/07 11:14:28 gleixner Exp $
-
 The SBC-MediaGX / SBC-GXx has up to 16 MiB of
 Intel StrataFlash (28F320/28F640) in x8 mode.
 
diff --git a/drivers/mtd/maps/sc520cdp.c b/drivers/mtd/maps/sc520cdp.c
index 4045e372b90d..85c1e56309ec 100644
--- a/drivers/mtd/maps/sc520cdp.c
+++ b/drivers/mtd/maps/sc520cdp.c
@@ -16,8 +16,6 @@
  * along with this program; if not, write to the Free Software
  * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA
  *
- * $Id: sc520cdp.c,v 1.23 2005/11/17 08:20:27 dwmw2 Exp $
- *
  *
  * The SC520CDP is an evaluation board for the Elan SC520 processor available
  * from AMD. It has two banks of 32-bit Flash ROM, each 8 Megabytes in size,
diff --git a/drivers/mtd/maps/scb2_flash.c b/drivers/mtd/maps/scb2_flash.c
index 0fc5584324e3..21169e6d646c 100644
--- a/drivers/mtd/maps/scb2_flash.c
+++ b/drivers/mtd/maps/scb2_flash.c
@@ -1,6 +1,5 @@
 /*
  * MTD map driver for BIOS Flash on Intel SCB2 boards
- * $Id: scb2_flash.c,v 1.12 2005/03/18 14:04:35 gleixner Exp $
  * Copyright (C) 2002 Sun Microsystems, Inc.
  * Tim Hockin <thockin@sun.com>
  *
diff --git a/drivers/mtd/maps/scx200_docflash.c b/drivers/mtd/maps/scx200_docflash.c
index 5e2bce22f37c..b5391ebb736e 100644
--- a/drivers/mtd/maps/scx200_docflash.c
+++ b/drivers/mtd/maps/scx200_docflash.c
@@ -2,8 +2,6 @@
 
    Copyright (c) 2001,2002 Christer Weinigel <wingel@nano-system.com>
 
-   $Id: scx200_docflash.c,v 1.12 2005/11/07 11:14:28 gleixner Exp $
-
    National Semiconductor SCx200 flash mapped with DOCCS
 */
 
diff --git a/drivers/mtd/maps/sharpsl-flash.c b/drivers/mtd/maps/sharpsl-flash.c
index 917dc778f24e..026eab028189 100644
--- a/drivers/mtd/maps/sharpsl-flash.c
+++ b/drivers/mtd/maps/sharpsl-flash.c
@@ -4,8 +4,6 @@
  * Copyright (C) 2001 Lineo Japan, Inc.
  * Copyright (C) 2002  SHARP
  *
- * $Id: sharpsl-flash.c,v 1.7 2005/11/07 11:14:28 gleixner Exp $
- *
  * based on rpxlite.c,v 1.15 2001/10/02 15:05:14 dwmw2 Exp
  *          Handle mapping of the flash on the RPX Lite and CLLF boards
  *
diff --git a/drivers/mtd/maps/solutionengine.c b/drivers/mtd/maps/solutionengine.c
index d76ceef453ce..0eb41d9c6786 100644
--- a/drivers/mtd/maps/solutionengine.c
+++ b/drivers/mtd/maps/solutionengine.c
@@ -1,6 +1,4 @@
 /*
- * $Id: solutionengine.c,v 1.15 2005/11/07 11:14:28 gleixner Exp $
- *
  * Flash and EPROM on Hitachi Solution Engine and similar boards.
  *
  * (C) 2001 Red Hat, Inc.
diff --git a/drivers/mtd/maps/sun_uflash.c b/drivers/mtd/maps/sun_uflash.c
index 001af7f7ddda..0d7c88396c88 100644
--- a/drivers/mtd/maps/sun_uflash.c
+++ b/drivers/mtd/maps/sun_uflash.c
@@ -1,4 +1,4 @@
-/* $Id: sun_uflash.c,v 1.13 2005/11/07 11:14:28 gleixner Exp $
+/*
  *
  * sun_uflash - Driver implementation for user-programmable flash
  * present on many Sun Microsystems SME boardsets.
diff --git a/drivers/mtd/maps/tqm8xxl.c b/drivers/mtd/maps/tqm8xxl.c
index 521734057314..a5d3d8531faa 100644
--- a/drivers/mtd/maps/tqm8xxl.c
+++ b/drivers/mtd/maps/tqm8xxl.c
@@ -2,8 +2,6 @@
  * Handle mapping of the flash memory access routines
  * on TQM8xxL based devices.
  *
- * $Id: tqm8xxl.c,v 1.15 2005/11/07 11:14:28 gleixner Exp $
- *
  * based on rpxlite.c
  *
  * Copyright(C) 2001 Kirk Lee <kirk@hpc.ee.ntu.edu.tw>
diff --git a/drivers/mtd/maps/ts5500_flash.c b/drivers/mtd/maps/ts5500_flash.c
index b47270e850bc..e2147bf11c88 100644
--- a/drivers/mtd/maps/ts5500_flash.c
+++ b/drivers/mtd/maps/ts5500_flash.c
@@ -22,8 +22,6 @@
  * - Drive A and B use the resident flash disk (RFD) flash translation layer.
  * - If you have created your own jffs file system and the bios overwrites
  *   it during boot, try disabling Drive A: and B: in the boot order.
- *
- * $Id: ts5500_flash.c,v 1.5 2005/11/07 11:14:28 gleixner Exp $
  */
 
 #include <linux/init.h>
diff --git a/drivers/mtd/maps/tsunami_flash.c b/drivers/mtd/maps/tsunami_flash.c
index 0f915ac3102e..77a8bfc02577 100644
--- a/drivers/mtd/maps/tsunami_flash.c
+++ b/drivers/mtd/maps/tsunami_flash.c
@@ -2,7 +2,6 @@
  * tsunami_flash.c
  *
  * flash chip on alpha ds10...
- * $Id: tsunami_flash.c,v 1.10 2005/11/07 11:14:29 gleixner Exp $
  */
 #include <asm/io.h>
 #include <asm/core_tsunami.h>
diff --git a/drivers/mtd/maps/uclinux.c b/drivers/mtd/maps/uclinux.c
index 3fcf92130aa4..0dc645f8152f 100644
--- a/drivers/mtd/maps/uclinux.c
+++ b/drivers/mtd/maps/uclinux.c
@@ -4,8 +4,6 @@
  *	uclinux.c -- generic memory mapped MTD driver for uclinux
  *
  *	(C) Copyright 2002, Greg Ungerer (gerg@snapgear.com)
- *
- * 	$Id: uclinux.c,v 1.12 2005/11/07 11:14:29 gleixner Exp $
  */
 
 /****************************************************************************/
diff --git a/drivers/mtd/maps/vmax301.c b/drivers/mtd/maps/vmax301.c
index b3e487395435..5a0c9a353b0f 100644
--- a/drivers/mtd/maps/vmax301.c
+++ b/drivers/mtd/maps/vmax301.c
@@ -1,4 +1,3 @@
-// $Id: vmax301.c,v 1.32 2005/11/07 11:14:29 gleixner Exp $
 /* ######################################################################
 
    Tempustech VMAX SBC301 MTD Driver.
diff --git a/drivers/mtd/maps/walnut.c b/drivers/mtd/maps/walnut.c
index ca932122fb64..e243476c8171 100644
--- a/drivers/mtd/maps/walnut.c
+++ b/drivers/mtd/maps/walnut.c
@@ -1,6 +1,4 @@
 /*
- * $Id: walnut.c,v 1.3 2005/11/07 11:14:29 gleixner Exp $
- *
  * Mapping for Walnut flash
  * (used ebony.c as a "framework")
  *
diff --git a/drivers/mtd/maps/wr_sbc82xx_flash.c b/drivers/mtd/maps/wr_sbc82xx_flash.c
index ac5b8105b6ef..413b0cf9bbd2 100644
--- a/drivers/mtd/maps/wr_sbc82xx_flash.c
+++ b/drivers/mtd/maps/wr_sbc82xx_flash.c
@@ -1,6 +1,4 @@
 /*
- * $Id: wr_sbc82xx_flash.c,v 1.8 2005/11/07 11:14:29 gleixner Exp $
- *
  * Map for flash chips on Wind River PowerQUICC II SBC82xx board.
  *
  * Copyright (C) 2004 Red Hat, Inc.
diff --git a/drivers/mtd/mtd_blkdevs.c b/drivers/mtd/mtd_blkdevs.c
index 839eed8430a2..9ff007c4962c 100644
--- a/drivers/mtd/mtd_blkdevs.c
+++ b/drivers/mtd/mtd_blkdevs.c
@@ -1,6 +1,4 @@
 /*
- * $Id: mtd_blkdevs.c,v 1.27 2005/11/07 11:14:20 gleixner Exp $
- *
  * (C) 2003 David Woodhouse <dwmw2@infradead.org>
  *
  * Interface to Linux 2.5 block layer for MTD 'translation layers'.
@@ -212,7 +210,7 @@ static struct block_device_operations mtd_blktrans_ops = {
 int add_mtd_blktrans_dev(struct mtd_blktrans_dev *new)
 {
 	struct mtd_blktrans_ops *tr = new->tr;
-	struct list_head *this;
+	struct mtd_blktrans_dev *d;
 	int last_devnum = -1;
 	struct gendisk *gd;
 
@@ -221,8 +219,7 @@ int add_mtd_blktrans_dev(struct mtd_blktrans_dev *new)
 		BUG();
 	}
 
-	list_for_each(this, &tr->devs) {
-		struct mtd_blktrans_dev *d = list_entry(this, struct mtd_blktrans_dev, list);
+	list_for_each_entry(d, &tr->devs, list) {
 		if (new->devnum == -1) {
 			/* Use first free number */
 			if (d->devnum != last_devnum+1) {
@@ -309,33 +306,24 @@ int del_mtd_blktrans_dev(struct mtd_blktrans_dev *old)
 
 static void blktrans_notify_remove(struct mtd_info *mtd)
 {
-	struct list_head *this, *this2, *next;
-
-	list_for_each(this, &blktrans_majors) {
-		struct mtd_blktrans_ops *tr = list_entry(this, struct mtd_blktrans_ops, list);
-
-		list_for_each_safe(this2, next, &tr->devs) {
-			struct mtd_blktrans_dev *dev = list_entry(this2, struct mtd_blktrans_dev, list);
+	struct mtd_blktrans_ops *tr;
+	struct mtd_blktrans_dev *dev, *next;
 
+	list_for_each_entry(tr, &blktrans_majors, list)
+		list_for_each_entry_safe(dev, next, &tr->devs, list)
 			if (dev->mtd == mtd)
 				tr->remove_dev(dev);
-		}
-	}
 }
 
 static void blktrans_notify_add(struct mtd_info *mtd)
 {
-	struct list_head *this;
+	struct mtd_blktrans_ops *tr;
 
 	if (mtd->type == MTD_ABSENT)
 		return;
 
-	list_for_each(this, &blktrans_majors) {
-		struct mtd_blktrans_ops *tr = list_entry(this, struct mtd_blktrans_ops, list);
-
+	list_for_each_entry(tr, &blktrans_majors, list)
 		tr->add_mtd(tr, mtd);
-	}
-
 }
 
 static struct mtd_notifier blktrans_notifier = {
@@ -406,7 +394,7 @@ int register_mtd_blktrans(struct mtd_blktrans_ops *tr)
 
 int deregister_mtd_blktrans(struct mtd_blktrans_ops *tr)
 {
-	struct list_head *this, *next;
+	struct mtd_blktrans_dev *dev, *next;
 
 	mutex_lock(&mtd_table_mutex);
 
@@ -416,10 +404,8 @@ int deregister_mtd_blktrans(struct mtd_blktrans_ops *tr)
 	/* Remove it from the list of active majors */
 	list_del(&tr->list);
 
-	list_for_each_safe(this, next, &tr->devs) {
-		struct mtd_blktrans_dev *dev = list_entry(this, struct mtd_blktrans_dev, list);
+	list_for_each_entry_safe(dev, next, &tr->devs, list)
 		tr->remove_dev(dev);
-	}
 
 	blk_cleanup_queue(tr->blkcore_priv->rq);
 	unregister_blkdev(tr->major, tr->name);
diff --git a/drivers/mtd/mtdblock.c b/drivers/mtd/mtdblock.c
index 952da30b1745..208c6faa0358 100644
--- a/drivers/mtd/mtdblock.c
+++ b/drivers/mtd/mtdblock.c
@@ -1,8 +1,6 @@
 /*
  * Direct MTD block device access
  *
- * $Id: mtdblock.c,v 1.68 2005/11/07 11:14:20 gleixner Exp $
- *
  * (C) 2000-2003 Nicolas Pitre <nico@cam.org>
  * (C) 1999-2003 David Woodhouse <dwmw2@infradead.org>
  */
diff --git a/drivers/mtd/mtdblock_ro.c b/drivers/mtd/mtdblock_ro.c
index f79dbb49b1a2..852165f8b1c3 100644
--- a/drivers/mtd/mtdblock_ro.c
+++ b/drivers/mtd/mtdblock_ro.c
@@ -1,6 +1,4 @@
 /*
- * $Id: mtdblock_ro.c,v 1.19 2004/11/16 18:28:59 dwmw2 Exp $
- *
  * (C) 2003 David Woodhouse <dwmw2@infradead.org>
  *
  * Simple read-only (writable only for RAM) mtdblock driver
diff --git a/drivers/mtd/mtdchar.c b/drivers/mtd/mtdchar.c
index aef9f4b687c9..e00d424e6575 100644
--- a/drivers/mtd/mtdchar.c
+++ b/drivers/mtd/mtdchar.c
@@ -1,6 +1,4 @@
 /*
- * $Id: mtdchar.c,v 1.76 2005/11/07 11:14:20 gleixner Exp $
- *
  * Character-device access to raw MTD devices.
  *
  */
@@ -412,16 +410,20 @@ static int mtd_ioctl(struct inode *inode, struct file *file,
 
 	case MEMGETREGIONINFO:
 	{
-		struct region_info_user ur;
+		uint32_t ur_idx;
+		struct mtd_erase_region_info *kr;
+		struct region_info_user *ur = (struct region_info_user *) argp;
 
-		if (copy_from_user(&ur, argp, sizeof(struct region_info_user)))
+		if (get_user(ur_idx, &(ur->regionindex)))
 			return -EFAULT;
 
-		if (ur.regionindex >= mtd->numeraseregions)
-			return -EINVAL;
-		if (copy_to_user(argp, &(mtd->eraseregions[ur.regionindex]),
-				sizeof(struct mtd_erase_region_info)))
+		kr = &(mtd->eraseregions[ur_idx]);
+
+		if (put_user(kr->offset, &(ur->offset))
+		    || put_user(kr->erasesize, &(ur->erasesize))
+		    || put_user(kr->numblocks, &(ur->numblocks)))
 			return -EFAULT;
+
 		break;
 	}
 
@@ -494,6 +496,7 @@ static int mtd_ioctl(struct inode *inode, struct file *file,
 	{
 		struct mtd_oob_buf buf;
 		struct mtd_oob_ops ops;
+		struct mtd_oob_buf __user *user_buf = argp;
 	        uint32_t retlen;
 
 		if(!(file->f_mode & 2))
@@ -537,8 +540,7 @@ static int mtd_ioctl(struct inode *inode, struct file *file,
 		if (ops.oobretlen > 0xFFFFFFFFU)
 			ret = -EOVERFLOW;
 		retlen = ops.oobretlen;
-		if (copy_to_user(&((struct mtd_oob_buf *)argp)->length,
-				 &retlen, sizeof(buf.length)))
+		if (copy_to_user(&user_buf->length, &retlen, sizeof(buf.length)))
 			ret = -EFAULT;
 
 		kfree(ops.oobbuf);
@@ -592,29 +594,29 @@ static int mtd_ioctl(struct inode *inode, struct file *file,
 
 	case MEMLOCK:
 	{
-		struct erase_info_user info;
+		struct erase_info_user einfo;
 
-		if (copy_from_user(&info, argp, sizeof(info)))
+		if (copy_from_user(&einfo, argp, sizeof(einfo)))
 			return -EFAULT;
 
 		if (!mtd->lock)
 			ret = -EOPNOTSUPP;
 		else
-			ret = mtd->lock(mtd, info.start, info.length);
+			ret = mtd->lock(mtd, einfo.start, einfo.length);
 		break;
 	}
 
 	case MEMUNLOCK:
 	{
-		struct erase_info_user info;
+		struct erase_info_user einfo;
 
-		if (copy_from_user(&info, argp, sizeof(info)))
+		if (copy_from_user(&einfo, argp, sizeof(einfo)))
 			return -EFAULT;
 
 		if (!mtd->unlock)
 			ret = -EOPNOTSUPP;
 		else
-			ret = mtd->unlock(mtd, info.start, info.length);
+			ret = mtd->unlock(mtd, einfo.start, einfo.length);
 		break;
 	}
 
@@ -714,15 +716,15 @@ static int mtd_ioctl(struct inode *inode, struct file *file,
 
 	case OTPLOCK:
 	{
-		struct otp_info info;
+		struct otp_info oinfo;
 
 		if (mfi->mode != MTD_MODE_OTP_USER)
 			return -EINVAL;
-		if (copy_from_user(&info, argp, sizeof(info)))
+		if (copy_from_user(&oinfo, argp, sizeof(oinfo)))
 			return -EFAULT;
 		if (!mtd->lock_user_prot_reg)
 			return -EOPNOTSUPP;
-		ret = mtd->lock_user_prot_reg(mtd, info.start, info.length);
+		ret = mtd->lock_user_prot_reg(mtd, oinfo.start, oinfo.length);
 		break;
 	}
 #endif
diff --git a/drivers/mtd/mtdconcat.c b/drivers/mtd/mtdconcat.c
index d563dcd4b264..2972a5edb73d 100644
--- a/drivers/mtd/mtdconcat.c
+++ b/drivers/mtd/mtdconcat.c
@@ -6,8 +6,6 @@
  * NAND support by Christian Gan <cgan@iders.ca>
  *
  * This code is GPL
- *
- * $Id: mtdconcat.c,v 1.11 2005/11/07 11:14:20 gleixner Exp $
  */
 
 #include <linux/kernel.h>
diff --git a/drivers/mtd/mtdcore.c b/drivers/mtd/mtdcore.c
index f7e7890e5bc6..a9d246949820 100644
--- a/drivers/mtd/mtdcore.c
+++ b/drivers/mtd/mtdcore.c
@@ -1,6 +1,4 @@
 /*
- * $Id: mtdcore.c,v 1.47 2005/11/07 11:14:20 gleixner Exp $
- *
  * Core registration and callback routines for MTD
  * drivers and users.
  *
@@ -53,7 +51,7 @@ int add_mtd_device(struct mtd_info *mtd)
 
 	for (i=0; i < MAX_MTD_DEVICES; i++)
 		if (!mtd_table[i]) {
-			struct list_head *this;
+			struct mtd_notifier *not;
 
 			mtd_table[i] = mtd;
 			mtd->index = i;
@@ -72,10 +70,8 @@ int add_mtd_device(struct mtd_info *mtd)
 			DEBUG(0, "mtd: Giving out device %d to %s\n",i, mtd->name);
 			/* No need to get a refcount on the module containing
 			   the notifier, since we hold the mtd_table_mutex */
-			list_for_each(this, &mtd_notifiers) {
-				struct mtd_notifier *not = list_entry(this, struct mtd_notifier, list);
+			list_for_each_entry(not, &mtd_notifiers, list)
 				not->add(mtd);
-			}
 
 			mutex_unlock(&mtd_table_mutex);
 			/* We _know_ we aren't being removed, because
@@ -113,14 +109,12 @@ int del_mtd_device (struct mtd_info *mtd)
 		       mtd->index, mtd->name, mtd->usecount);
 		ret = -EBUSY;
 	} else {
-		struct list_head *this;
+		struct mtd_notifier *not;
 
 		/* No need to get a refcount on the module containing
 		   the notifier, since we hold the mtd_table_mutex */
-		list_for_each(this, &mtd_notifiers) {
-			struct mtd_notifier *not = list_entry(this, struct mtd_notifier, list);
+		list_for_each_entry(not, &mtd_notifiers, list)
 			not->remove(mtd);
-		}
 
 		mtd_table[mtd->index] = NULL;
 
diff --git a/drivers/mtd/mtdpart.c b/drivers/mtd/mtdpart.c
index 07c701169344..edb90b58a9b1 100644
--- a/drivers/mtd/mtdpart.c
+++ b/drivers/mtd/mtdpart.c
@@ -5,8 +5,6 @@
  *
  * This code is GPL
  *
- * $Id: mtdpart.c,v 1.55 2005/11/07 11:14:20 gleixner Exp $
- *
  * 	02-21-2002	Thomas Gleixner <gleixner@autronix.de>
  *			added support for read_oob, write_oob
  */
@@ -46,8 +44,8 @@ struct mtd_part {
  * to the _real_ device.
  */
 
-static int part_read (struct mtd_info *mtd, loff_t from, size_t len,
-			size_t *retlen, u_char *buf)
+static int part_read(struct mtd_info *mtd, loff_t from, size_t len,
+		size_t *retlen, u_char *buf)
 {
 	struct mtd_part *part = PART(mtd);
 	int res;
@@ -56,7 +54,7 @@ static int part_read (struct mtd_info *mtd, loff_t from, size_t len,
 		len = 0;
 	else if (from + len > mtd->size)
 		len = mtd->size - from;
-	res = part->master->read (part->master, from + part->offset,
+	res = part->master->read(part->master, from + part->offset,
 				   len, retlen, buf);
 	if (unlikely(res)) {
 		if (res == -EUCLEAN)
@@ -67,8 +65,8 @@ static int part_read (struct mtd_info *mtd, loff_t from, size_t len,
 	return res;
 }
 
-static int part_point (struct mtd_info *mtd, loff_t from, size_t len,
-			size_t *retlen, void **virt, resource_size_t *phys)
+static int part_point(struct mtd_info *mtd, loff_t from, size_t len,
+		size_t *retlen, void **virt, resource_size_t *phys)
 {
 	struct mtd_part *part = PART(mtd);
 	if (from >= mtd->size)
@@ -87,7 +85,7 @@ static void part_unpoint(struct mtd_info *mtd, loff_t from, size_t len)
 }
 
 static int part_read_oob(struct mtd_info *mtd, loff_t from,
-			 struct mtd_oob_ops *ops)
+		struct mtd_oob_ops *ops)
 {
 	struct mtd_part *part = PART(mtd);
 	int res;
@@ -107,38 +105,38 @@ static int part_read_oob(struct mtd_info *mtd, loff_t from,
 	return res;
 }
 
-static int part_read_user_prot_reg (struct mtd_info *mtd, loff_t from, size_t len,
-			size_t *retlen, u_char *buf)
+static int part_read_user_prot_reg(struct mtd_info *mtd, loff_t from,
+		size_t len, size_t *retlen, u_char *buf)
 {
 	struct mtd_part *part = PART(mtd);
-	return part->master->read_user_prot_reg (part->master, from,
+	return part->master->read_user_prot_reg(part->master, from,
 					len, retlen, buf);
 }
 
-static int part_get_user_prot_info (struct mtd_info *mtd,
-				    struct otp_info *buf, size_t len)
+static int part_get_user_prot_info(struct mtd_info *mtd,
+		struct otp_info *buf, size_t len)
 {
 	struct mtd_part *part = PART(mtd);
-	return part->master->get_user_prot_info (part->master, buf, len);
+	return part->master->get_user_prot_info(part->master, buf, len);
 }
 
-static int part_read_fact_prot_reg (struct mtd_info *mtd, loff_t from, size_t len,
-			size_t *retlen, u_char *buf)
+static int part_read_fact_prot_reg(struct mtd_info *mtd, loff_t from,
+		size_t len, size_t *retlen, u_char *buf)
 {
 	struct mtd_part *part = PART(mtd);
-	return part->master->read_fact_prot_reg (part->master, from,
+	return part->master->read_fact_prot_reg(part->master, from,
 					len, retlen, buf);
 }
 
-static int part_get_fact_prot_info (struct mtd_info *mtd,
-				    struct otp_info *buf, size_t len)
+static int part_get_fact_prot_info(struct mtd_info *mtd, struct otp_info *buf,
+		size_t len)
 {
 	struct mtd_part *part = PART(mtd);
-	return part->master->get_fact_prot_info (part->master, buf, len);
+	return part->master->get_fact_prot_info(part->master, buf, len);
 }
 
-static int part_write (struct mtd_info *mtd, loff_t to, size_t len,
-			size_t *retlen, const u_char *buf)
+static int part_write(struct mtd_info *mtd, loff_t to, size_t len,
+		size_t *retlen, const u_char *buf)
 {
 	struct mtd_part *part = PART(mtd);
 	if (!(mtd->flags & MTD_WRITEABLE))
@@ -147,12 +145,12 @@ static int part_write (struct mtd_info *mtd, loff_t to, size_t len,
 		len = 0;
 	else if (to + len > mtd->size)
 		len = mtd->size - to;
-	return part->master->write (part->master, to + part->offset,
+	return part->master->write(part->master, to + part->offset,
 				    len, retlen, buf);
 }
 
-static int part_panic_write (struct mtd_info *mtd, loff_t to, size_t len,
-			size_t *retlen, const u_char *buf)
+static int part_panic_write(struct mtd_info *mtd, loff_t to, size_t len,
+		size_t *retlen, const u_char *buf)
 {
 	struct mtd_part *part = PART(mtd);
 	if (!(mtd->flags & MTD_WRITEABLE))
@@ -161,12 +159,12 @@ static int part_panic_write (struct mtd_info *mtd, loff_t to, size_t len,
 		len = 0;
 	else if (to + len > mtd->size)
 		len = mtd->size - to;
-	return part->master->panic_write (part->master, to + part->offset,
+	return part->master->panic_write(part->master, to + part->offset,
 				    len, retlen, buf);
 }
 
 static int part_write_oob(struct mtd_info *mtd, loff_t to,
-			 struct mtd_oob_ops *ops)
+		struct mtd_oob_ops *ops)
 {
 	struct mtd_part *part = PART(mtd);
 
@@ -180,31 +178,32 @@ static int part_write_oob(struct mtd_info *mtd, loff_t to,
 	return part->master->write_oob(part->master, to + part->offset, ops);
 }
 
-static int part_write_user_prot_reg (struct mtd_info *mtd, loff_t from, size_t len,
-			size_t *retlen, u_char *buf)
+static int part_write_user_prot_reg(struct mtd_info *mtd, loff_t from,
+		size_t len, size_t *retlen, u_char *buf)
 {
 	struct mtd_part *part = PART(mtd);
-	return part->master->write_user_prot_reg (part->master, from,
+	return part->master->write_user_prot_reg(part->master, from,
 					len, retlen, buf);
 }
 
-static int part_lock_user_prot_reg (struct mtd_info *mtd, loff_t from, size_t len)
+static int part_lock_user_prot_reg(struct mtd_info *mtd, loff_t from,
+		size_t len)
 {
 	struct mtd_part *part = PART(mtd);
-	return part->master->lock_user_prot_reg (part->master, from, len);
+	return part->master->lock_user_prot_reg(part->master, from, len);
 }
 
-static int part_writev (struct mtd_info *mtd,  const struct kvec *vecs,
-			 unsigned long count, loff_t to, size_t *retlen)
+static int part_writev(struct mtd_info *mtd, const struct kvec *vecs,
+		unsigned long count, loff_t to, size_t *retlen)
 {
 	struct mtd_part *part = PART(mtd);
 	if (!(mtd->flags & MTD_WRITEABLE))
 		return -EROFS;
-	return part->master->writev (part->master, vecs, count,
+	return part->master->writev(part->master, vecs, count,
 					to + part->offset, retlen);
 }
 
-static int part_erase (struct mtd_info *mtd, struct erase_info *instr)
+static int part_erase(struct mtd_info *mtd, struct erase_info *instr)
 {
 	struct mtd_part *part = PART(mtd);
 	int ret;
@@ -236,7 +235,7 @@ void mtd_erase_callback(struct erase_info *instr)
 }
 EXPORT_SYMBOL_GPL(mtd_erase_callback);
 
-static int part_lock (struct mtd_info *mtd, loff_t ofs, size_t len)
+static int part_lock(struct mtd_info *mtd, loff_t ofs, size_t len)
 {
 	struct mtd_part *part = PART(mtd);
 	if ((len + ofs) > mtd->size)
@@ -244,7 +243,7 @@ static int part_lock (struct mtd_info *mtd, loff_t ofs, size_t len)
 	return part->master->lock(part->master, ofs + part->offset, len);
 }
 
-static int part_unlock (struct mtd_info *mtd, loff_t ofs, size_t len)
+static int part_unlock(struct mtd_info *mtd, loff_t ofs, size_t len)
 {
 	struct mtd_part *part = PART(mtd);
 	if ((len + ofs) > mtd->size)
@@ -270,7 +269,7 @@ static void part_resume(struct mtd_info *mtd)
 	part->master->resume(part->master);
 }
 
-static int part_block_isbad (struct mtd_info *mtd, loff_t ofs)
+static int part_block_isbad(struct mtd_info *mtd, loff_t ofs)
 {
 	struct mtd_part *part = PART(mtd);
 	if (ofs >= mtd->size)
@@ -279,7 +278,7 @@ static int part_block_isbad (struct mtd_info *mtd, loff_t ofs)
 	return part->master->block_isbad(part->master, ofs);
 }
 
-static int part_block_markbad (struct mtd_info *mtd, loff_t ofs)
+static int part_block_markbad(struct mtd_info *mtd, loff_t ofs)
 {
 	struct mtd_part *part = PART(mtd);
 	int res;
@@ -302,229 +301,237 @@ static int part_block_markbad (struct mtd_info *mtd, loff_t ofs)
 
 int del_mtd_partitions(struct mtd_info *master)
 {
-	struct list_head *node;
-	struct mtd_part *slave;
+	struct mtd_part *slave, *next;
 
-	for (node = mtd_partitions.next;
-	     node != &mtd_partitions;
-	     node = node->next) {
-		slave = list_entry(node, struct mtd_part, list);
+	list_for_each_entry_safe(slave, next, &mtd_partitions, list)
 		if (slave->master == master) {
-			struct list_head *prev = node->prev;
-			__list_del(prev, node->next);
-			if(slave->registered)
+			list_del(&slave->list);
+			if (slave->registered)
 				del_mtd_device(&slave->mtd);
 			kfree(slave);
-			node = prev;
 		}
-	}
 
 	return 0;
 }
+EXPORT_SYMBOL(del_mtd_partitions);
 
-/*
- * This function, given a master MTD object and a partition table, creates
- * and registers slave MTD objects which are bound to the master according to
- * the partition definitions.
- * (Q: should we register the master MTD object as well?)
- */
-
-int add_mtd_partitions(struct mtd_info *master,
-		       const struct mtd_partition *parts,
-		       int nbparts)
+static struct mtd_part *add_one_partition(struct mtd_info *master,
+		const struct mtd_partition *part, int partno,
+		u_int32_t cur_offset)
 {
 	struct mtd_part *slave;
-	u_int32_t cur_offset = 0;
-	int i;
-
-	printk (KERN_NOTICE "Creating %d MTD partitions on \"%s\":\n", nbparts, master->name);
-
-	for (i = 0; i < nbparts; i++) {
 
-		/* allocate the partition structure */
-		slave = kzalloc (sizeof(*slave), GFP_KERNEL);
-		if (!slave) {
-			printk ("memory allocation error while creating partitions for \"%s\"\n",
-				master->name);
-			del_mtd_partitions(master);
-			return -ENOMEM;
-		}
-		list_add(&slave->list, &mtd_partitions);
+	/* allocate the partition structure */
+	slave = kzalloc(sizeof(*slave), GFP_KERNEL);
+	if (!slave) {
+		printk(KERN_ERR"memory allocation error while creating partitions for \"%s\"\n",
+			master->name);
+		del_mtd_partitions(master);
+		return NULL;
+	}
+	list_add(&slave->list, &mtd_partitions);
 
-		/* set up the MTD object for this partition */
-		slave->mtd.type = master->type;
-		slave->mtd.flags = master->flags & ~parts[i].mask_flags;
-		slave->mtd.size = parts[i].size;
-		slave->mtd.writesize = master->writesize;
-		slave->mtd.oobsize = master->oobsize;
-		slave->mtd.oobavail = master->oobavail;
-		slave->mtd.subpage_sft = master->subpage_sft;
+	/* set up the MTD object for this partition */
+	slave->mtd.type = master->type;
+	slave->mtd.flags = master->flags & ~part->mask_flags;
+	slave->mtd.size = part->size;
+	slave->mtd.writesize = master->writesize;
+	slave->mtd.oobsize = master->oobsize;
+	slave->mtd.oobavail = master->oobavail;
+	slave->mtd.subpage_sft = master->subpage_sft;
 
-		slave->mtd.name = parts[i].name;
-		slave->mtd.owner = master->owner;
+	slave->mtd.name = part->name;
+	slave->mtd.owner = master->owner;
 
-		slave->mtd.read = part_read;
-		slave->mtd.write = part_write;
+	slave->mtd.read = part_read;
+	slave->mtd.write = part_write;
 
-		if (master->panic_write)
-			slave->mtd.panic_write = part_panic_write;
+	if (master->panic_write)
+		slave->mtd.panic_write = part_panic_write;
 
-		if(master->point && master->unpoint){
-			slave->mtd.point = part_point;
-			slave->mtd.unpoint = part_unpoint;
-		}
+	if (master->point && master->unpoint) {
+		slave->mtd.point = part_point;
+		slave->mtd.unpoint = part_unpoint;
+	}
 
-		if (master->read_oob)
-			slave->mtd.read_oob = part_read_oob;
-		if (master->write_oob)
-			slave->mtd.write_oob = part_write_oob;
-		if(master->read_user_prot_reg)
-			slave->mtd.read_user_prot_reg = part_read_user_prot_reg;
-		if(master->read_fact_prot_reg)
-			slave->mtd.read_fact_prot_reg = part_read_fact_prot_reg;
-		if(master->write_user_prot_reg)
-			slave->mtd.write_user_prot_reg = part_write_user_prot_reg;
-		if(master->lock_user_prot_reg)
-			slave->mtd.lock_user_prot_reg = part_lock_user_prot_reg;
-		if(master->get_user_prot_info)
-			slave->mtd.get_user_prot_info = part_get_user_prot_info;
-		if(master->get_fact_prot_info)
-			slave->mtd.get_fact_prot_info = part_get_fact_prot_info;
-		if (master->sync)
-			slave->mtd.sync = part_sync;
-		if (!i && master->suspend && master->resume) {
-				slave->mtd.suspend = part_suspend;
-				slave->mtd.resume = part_resume;
+	if (master->read_oob)
+		slave->mtd.read_oob = part_read_oob;
+	if (master->write_oob)
+		slave->mtd.write_oob = part_write_oob;
+	if (master->read_user_prot_reg)
+		slave->mtd.read_user_prot_reg = part_read_user_prot_reg;
+	if (master->read_fact_prot_reg)
+		slave->mtd.read_fact_prot_reg = part_read_fact_prot_reg;
+	if (master->write_user_prot_reg)
+		slave->mtd.write_user_prot_reg = part_write_user_prot_reg;
+	if (master->lock_user_prot_reg)
+		slave->mtd.lock_user_prot_reg = part_lock_user_prot_reg;
+	if (master->get_user_prot_info)
+		slave->mtd.get_user_prot_info = part_get_user_prot_info;
+	if (master->get_fact_prot_info)
+		slave->mtd.get_fact_prot_info = part_get_fact_prot_info;
+	if (master->sync)
+		slave->mtd.sync = part_sync;
+	if (!partno && master->suspend && master->resume) {
+			slave->mtd.suspend = part_suspend;
+			slave->mtd.resume = part_resume;
+	}
+	if (master->writev)
+		slave->mtd.writev = part_writev;
+	if (master->lock)
+		slave->mtd.lock = part_lock;
+	if (master->unlock)
+		slave->mtd.unlock = part_unlock;
+	if (master->block_isbad)
+		slave->mtd.block_isbad = part_block_isbad;
+	if (master->block_markbad)
+		slave->mtd.block_markbad = part_block_markbad;
+	slave->mtd.erase = part_erase;
+	slave->master = master;
+	slave->offset = part->offset;
+	slave->index = partno;
+
+	if (slave->offset == MTDPART_OFS_APPEND)
+		slave->offset = cur_offset;
+	if (slave->offset == MTDPART_OFS_NXTBLK) {
+		slave->offset = cur_offset;
+		if ((cur_offset % master->erasesize) != 0) {
+			/* Round up to next erasesize */
+			slave->offset = ((cur_offset / master->erasesize) + 1) * master->erasesize;
+			printk(KERN_NOTICE "Moving partition %d: "
+			       "0x%08x -> 0x%08x\n", partno,
+			       cur_offset, slave->offset);
 		}
-		if (master->writev)
-			slave->mtd.writev = part_writev;
-		if (master->lock)
-			slave->mtd.lock = part_lock;
-		if (master->unlock)
-			slave->mtd.unlock = part_unlock;
-		if (master->block_isbad)
-			slave->mtd.block_isbad = part_block_isbad;
-		if (master->block_markbad)
-			slave->mtd.block_markbad = part_block_markbad;
-		slave->mtd.erase = part_erase;
-		slave->master = master;
-		slave->offset = parts[i].offset;
-		slave->index = i;
-
-		if (slave->offset == MTDPART_OFS_APPEND)
-			slave->offset = cur_offset;
-		if (slave->offset == MTDPART_OFS_NXTBLK) {
-			slave->offset = cur_offset;
-			if ((cur_offset % master->erasesize) != 0) {
-				/* Round up to next erasesize */
-				slave->offset = ((cur_offset / master->erasesize) + 1) * master->erasesize;
-				printk(KERN_NOTICE "Moving partition %d: "
-				       "0x%08x -> 0x%08x\n", i,
-				       cur_offset, slave->offset);
+	}
+	if (slave->mtd.size == MTDPART_SIZ_FULL)
+		slave->mtd.size = master->size - slave->offset;
+
+	printk(KERN_NOTICE "0x%08x-0x%08x : \"%s\"\n", slave->offset,
+		slave->offset + slave->mtd.size, slave->mtd.name);
+
+	/* let's do some sanity checks */
+	if (slave->offset >= master->size) {
+		/* let's register it anyway to preserve ordering */
+		slave->offset = 0;
+		slave->mtd.size = 0;
+		printk(KERN_ERR"mtd: partition \"%s\" is out of reach -- disabled\n",
+			part->name);
+		goto out_register;
+	}
+	if (slave->offset + slave->mtd.size > master->size) {
+		slave->mtd.size = master->size - slave->offset;
+		printk(KERN_WARNING"mtd: partition \"%s\" extends beyond the end of device \"%s\" -- size truncated to %#x\n",
+			part->name, master->name, slave->mtd.size);
+	}
+	if (master->numeraseregions > 1) {
+		/* Deal with variable erase size stuff */
+		int i, max = master->numeraseregions;
+		u32 end = slave->offset + slave->mtd.size;
+		struct mtd_erase_region_info *regions = master->eraseregions;
+
+		/* Find the first erase regions which is part of this
+		 * partition. */
+		for (i = 0; i < max && regions[i].offset <= slave->offset; i++)
+			;
+		/* The loop searched for the region _behind_ the first one */
+		i--;
+
+		/* Pick biggest erasesize */
+		for (; i < max && regions[i].offset < end; i++) {
+			if (slave->mtd.erasesize < regions[i].erasesize) {
+				slave->mtd.erasesize = regions[i].erasesize;
 			}
 		}
-		if (slave->mtd.size == MTDPART_SIZ_FULL)
-			slave->mtd.size = master->size - slave->offset;
-		cur_offset = slave->offset + slave->mtd.size;
+		BUG_ON(slave->mtd.erasesize == 0);
+	} else {
+		/* Single erase size */
+		slave->mtd.erasesize = master->erasesize;
+	}
 
-		printk (KERN_NOTICE "0x%08x-0x%08x : \"%s\"\n", slave->offset,
-			slave->offset + slave->mtd.size, slave->mtd.name);
+	if ((slave->mtd.flags & MTD_WRITEABLE) &&
+	    (slave->offset % slave->mtd.erasesize)) {
+		/* Doesn't start on a boundary of major erase size */
+		/* FIXME: Let it be writable if it is on a boundary of
+		 * _minor_ erase size though */
+		slave->mtd.flags &= ~MTD_WRITEABLE;
+		printk(KERN_WARNING"mtd: partition \"%s\" doesn't start on an erase block boundary -- force read-only\n",
+			part->name);
+	}
+	if ((slave->mtd.flags & MTD_WRITEABLE) &&
+	    (slave->mtd.size % slave->mtd.erasesize)) {
+		slave->mtd.flags &= ~MTD_WRITEABLE;
+		printk(KERN_WARNING"mtd: partition \"%s\" doesn't end on an erase block -- force read-only\n",
+			part->name);
+	}
 
-		/* let's do some sanity checks */
-		if (slave->offset >= master->size) {
-				/* let's register it anyway to preserve ordering */
-			slave->offset = 0;
-			slave->mtd.size = 0;
-			printk ("mtd: partition \"%s\" is out of reach -- disabled\n",
-				parts[i].name);
-		}
-		if (slave->offset + slave->mtd.size > master->size) {
-			slave->mtd.size = master->size - slave->offset;
-			printk ("mtd: partition \"%s\" extends beyond the end of device \"%s\" -- size truncated to %#x\n",
-				parts[i].name, master->name, slave->mtd.size);
-		}
-		if (master->numeraseregions>1) {
-			/* Deal with variable erase size stuff */
-			int i;
-			struct mtd_erase_region_info *regions = master->eraseregions;
-
-			/* Find the first erase regions which is part of this partition. */
-			for (i=0; i < master->numeraseregions && slave->offset >= regions[i].offset; i++)
-				;
-
-			for (i--; i < master->numeraseregions && slave->offset + slave->mtd.size > regions[i].offset; i++) {
-				if (slave->mtd.erasesize < regions[i].erasesize) {
-					slave->mtd.erasesize = regions[i].erasesize;
-				}
-			}
-		} else {
-			/* Single erase size */
-			slave->mtd.erasesize = master->erasesize;
-		}
+	slave->mtd.ecclayout = master->ecclayout;
+	if (master->block_isbad) {
+		uint32_t offs = 0;
 
-		if ((slave->mtd.flags & MTD_WRITEABLE) &&
-		    (slave->offset % slave->mtd.erasesize)) {
-			/* Doesn't start on a boundary of major erase size */
-			/* FIXME: Let it be writable if it is on a boundary of _minor_ erase size though */
-			slave->mtd.flags &= ~MTD_WRITEABLE;
-			printk ("mtd: partition \"%s\" doesn't start on an erase block boundary -- force read-only\n",
-				parts[i].name);
-		}
-		if ((slave->mtd.flags & MTD_WRITEABLE) &&
-		    (slave->mtd.size % slave->mtd.erasesize)) {
-			slave->mtd.flags &= ~MTD_WRITEABLE;
-			printk ("mtd: partition \"%s\" doesn't end on an erase block -- force read-only\n",
-				parts[i].name);
+		while (offs < slave->mtd.size) {
+			if (master->block_isbad(master,
+						offs + slave->offset))
+				slave->mtd.ecc_stats.badblocks++;
+			offs += slave->mtd.erasesize;
 		}
+	}
 
-		slave->mtd.ecclayout = master->ecclayout;
-		if (master->block_isbad) {
-			uint32_t offs = 0;
+out_register:
+	if (part->mtdp) {
+		/* store the object pointer (caller may or may not register it*/
+		*part->mtdp = &slave->mtd;
+		slave->registered = 0;
+	} else {
+		/* register our partition */
+		add_mtd_device(&slave->mtd);
+		slave->registered = 1;
+	}
+	return slave;
+}
 
-			while(offs < slave->mtd.size) {
-				if (master->block_isbad(master,
-							offs + slave->offset))
-					slave->mtd.ecc_stats.badblocks++;
-				offs += slave->mtd.erasesize;
-			}
-		}
+/*
+ * This function, given a master MTD object and a partition table, creates
+ * and registers slave MTD objects which are bound to the master according to
+ * the partition definitions.
+ * (Q: should we register the master MTD object as well?)
+ */
 
-		if(parts[i].mtdp)
-		{	/* store the object pointer (caller may or may not register it */
-			*parts[i].mtdp = &slave->mtd;
-			slave->registered = 0;
-		}
-		else
-		{
-			/* register our partition */
-			add_mtd_device(&slave->mtd);
-			slave->registered = 1;
-		}
+int add_mtd_partitions(struct mtd_info *master,
+		       const struct mtd_partition *parts,
+		       int nbparts)
+{
+	struct mtd_part *slave;
+	u_int32_t cur_offset = 0;
+	int i;
+
+	printk(KERN_NOTICE "Creating %d MTD partitions on \"%s\":\n", nbparts, master->name);
+
+	for (i = 0; i < nbparts; i++) {
+		slave = add_one_partition(master, parts + i, i, cur_offset);
+		if (!slave)
+			return -ENOMEM;
+		cur_offset = slave->offset + slave->mtd.size;
 	}
 
 	return 0;
 }
-
 EXPORT_SYMBOL(add_mtd_partitions);
-EXPORT_SYMBOL(del_mtd_partitions);
 
 static DEFINE_SPINLOCK(part_parser_lock);
 static LIST_HEAD(part_parsers);
 
 static struct mtd_part_parser *get_partition_parser(const char *name)
 {
-	struct list_head *this;
-	void *ret = NULL;
-	spin_lock(&part_parser_lock);
+	struct mtd_part_parser *p, *ret = NULL;
 
-	list_for_each(this, &part_parsers) {
-		struct mtd_part_parser *p = list_entry(this, struct mtd_part_parser, list);
+	spin_lock(&part_parser_lock);
 
+	list_for_each_entry(p, &part_parsers, list)
 		if (!strcmp(p->name, name) && try_module_get(p->owner)) {
 			ret = p;
 			break;
 		}
-	}
+
 	spin_unlock(&part_parser_lock);
 
 	return ret;
@@ -538,6 +545,7 @@ int register_mtd_parser(struct mtd_part_parser *p)
 
 	return 0;
 }
+EXPORT_SYMBOL_GPL(register_mtd_parser);
 
 int deregister_mtd_parser(struct mtd_part_parser *p)
 {
@@ -546,6 +554,7 @@ int deregister_mtd_parser(struct mtd_part_parser *p)
 	spin_unlock(&part_parser_lock);
 	return 0;
 }
+EXPORT_SYMBOL_GPL(deregister_mtd_parser);
 
 int parse_mtd_partitions(struct mtd_info *master, const char **types,
 			 struct mtd_partition **pparts, unsigned long origin)
@@ -573,7 +582,4 @@ int parse_mtd_partitions(struct mtd_info *master, const char **types,
 	}
 	return ret;
 }
-
 EXPORT_SYMBOL_GPL(parse_mtd_partitions);
-EXPORT_SYMBOL_GPL(register_mtd_parser);
-EXPORT_SYMBOL_GPL(deregister_mtd_parser);
diff --git a/drivers/mtd/mtdsuper.c b/drivers/mtd/mtdsuper.c
index 28cc6787a800..00d46e137b2a 100644
--- a/drivers/mtd/mtdsuper.c
+++ b/drivers/mtd/mtdsuper.c
@@ -125,8 +125,11 @@ int get_sb_mtd(struct file_system_type *fs_type, int flags,
 	       int (*fill_super)(struct super_block *, void *, int),
 	       struct vfsmount *mnt)
 {
-	struct nameidata nd;
-	int mtdnr, ret;
+#ifdef CONFIG_BLOCK
+	struct block_device *bdev;
+	int ret, major;
+#endif
+	int mtdnr;
 
 	if (!dev_name)
 		return -EINVAL;
@@ -178,45 +181,38 @@ int get_sb_mtd(struct file_system_type *fs_type, int flags,
 		}
 	}
 
+#ifdef CONFIG_BLOCK
 	/* try the old way - the hack where we allowed users to mount
 	 * /dev/mtdblock$(n) but didn't actually _use_ the blockdev
 	 */
-	ret = path_lookup(dev_name, LOOKUP_FOLLOW, &nd);
-
-	DEBUG(1, "MTDSB: path_lookup() returned %d, inode %p\n",
-	      ret, nd.path.dentry ? nd.path.dentry->d_inode : NULL);
-
-	if (ret)
+	bdev = lookup_bdev(dev_name);
+	if (IS_ERR(bdev)) {
+		ret = PTR_ERR(bdev);
+		DEBUG(1, "MTDSB: lookup_bdev() returned %d\n", ret);
 		return ret;
+	}
+	DEBUG(1, "MTDSB: lookup_bdev() returned 0\n");
 
 	ret = -EINVAL;
 
-	if (!S_ISBLK(nd.path.dentry->d_inode->i_mode))
-		goto out;
-
-	if (nd.path.mnt->mnt_flags & MNT_NODEV) {
-		ret = -EACCES;
-		goto out;
-	}
+	major = MAJOR(bdev->bd_dev);
+	mtdnr = MINOR(bdev->bd_dev);
+	bdput(bdev);
 
-	if (imajor(nd.path.dentry->d_inode) != MTD_BLOCK_MAJOR)
+	if (major != MTD_BLOCK_MAJOR)
 		goto not_an_MTD_device;
 
-	mtdnr = iminor(nd.path.dentry->d_inode);
-	path_put(&nd.path);
-
 	return get_sb_mtd_nr(fs_type, flags, dev_name, data, mtdnr, fill_super,
 			     mnt);
 
 not_an_MTD_device:
+#endif /* CONFIG_BLOCK */
+
 	if (!(flags & MS_SILENT))
 		printk(KERN_NOTICE
 		       "MTD: Attempt to mount non-MTD device \"%s\"\n",
 		       dev_name);
-out:
-	path_put(&nd.path);
-	return ret;
-
+	return -EINVAL;
 }
 
 EXPORT_SYMBOL_GPL(get_sb_mtd);
diff --git a/drivers/mtd/nand/Kconfig b/drivers/mtd/nand/Kconfig
index 5076faf9ca66..41f361c49b32 100644
--- a/drivers/mtd/nand/Kconfig
+++ b/drivers/mtd/nand/Kconfig
@@ -1,5 +1,4 @@
 # drivers/mtd/nand/Kconfig
-# $Id: Kconfig,v 1.35 2005/11/07 11:14:30 gleixner Exp $
 
 menuconfig MTD_NAND
 	tristate "NAND Device Support"
@@ -105,11 +104,24 @@ config MTD_NAND_BF5XX
 
 config MTD_NAND_BF5XX_HWECC
 	bool "BF5XX NAND Hardware ECC"
+	default y
 	depends on MTD_NAND_BF5XX
 	help
 	  Enable the use of the BF5XX's internal ECC generator when
 	  using NAND.
 
+config MTD_NAND_BF5XX_BOOTROM_ECC
+	bool "Use Blackfin BootROM ECC Layout"
+	default n
+	depends on MTD_NAND_BF5XX_HWECC
+	help
+	  If you wish to modify NAND pages and allow the Blackfin on-chip
+	  BootROM to boot from them, say Y here.  This is only necessary
+	  if you are booting U-Boot out of NAND and you wish to update
+	  U-Boot from Linux' userspace.  Otherwise, you should say N here.
+
+	  If unsure, say N.
+
 config MTD_NAND_RTC_FROM4
 	tristate "Renesas Flash ROM 4-slot interface board (FROM_BOARD4)"
 	depends on SH_SOLUTION_ENGINE
@@ -272,22 +284,23 @@ config MTD_NAND_CS553X
 
 	  If you say "m", the module will be called "cs553x_nand.ko".
 
-config MTD_NAND_AT91
-	bool "Support for NAND Flash / SmartMedia on AT91"
-	depends on ARCH_AT91
+config MTD_NAND_ATMEL
+	tristate "Support for NAND Flash / SmartMedia on AT91 and AVR32"
+	depends on ARCH_AT91 || AVR32
 	help
 	  Enables support for NAND Flash / Smart Media Card interface
-	  on Atmel AT91 processors.
+	  on Atmel AT91 and AVR32 processors.
 choice
-	prompt "ECC management for NAND Flash / SmartMedia on AT91"
-	depends on MTD_NAND_AT91
+	prompt "ECC management for NAND Flash / SmartMedia on AT91 / AVR32"
+	depends on MTD_NAND_ATMEL
 
-config MTD_NAND_AT91_ECC_HW
+config MTD_NAND_ATMEL_ECC_HW
 	bool "Hardware ECC"
-	depends on ARCH_AT91SAM9263 || ARCH_AT91SAM9260
+	depends on ARCH_AT91SAM9263 || ARCH_AT91SAM9260 || AVR32
 	help
-	  Uses hardware ECC provided by the at91sam9260/at91sam9263 chip
-	  instead of software ECC.
+	  Use hardware ECC instead of software ECC when the chip
+	  supports it.
+
 	  The hardware ECC controller is capable of single bit error
 	  correction and 2-bit random detection per page.
 
@@ -297,16 +310,16 @@ config MTD_NAND_AT91_ECC_HW
 
 	  If unsure, say Y
 
-config MTD_NAND_AT91_ECC_SOFT
+config MTD_NAND_ATMEL_ECC_SOFT
 	bool "Software ECC"
 	help
-	  Uses software ECC.
+	  Use software ECC.
 
 	  NB : hardware and software ECC schemes are incompatible.
 	  If you switch from one to another, you'll have to erase your
 	  mtd partition.
 
-config MTD_NAND_AT91_ECC_NONE
+config MTD_NAND_ATMEL_ECC_NONE
 	bool "No ECC (testing only, DANGEROUS)"
 	depends on DEBUG_KERNEL
 	help
@@ -338,6 +351,13 @@ config MTD_NAND_PASEMI
 	  Enables support for NAND Flash interface on PA Semi PWRficient
 	  based boards
 
+config MTD_NAND_TMIO
+	tristate "NAND Flash device on Toshiba Mobile IO Controller"
+	depends on MTD_NAND && MFD_TMIO
+	help
+	  Support for NAND flash connected to a Toshiba Mobile IO
+	  Controller in some PDAs, including the Sharp SL6000x.
+
 config MTD_NAND_NANDSIM
 	tristate "Support for NAND Flash Simulator"
 	depends on MTD_PARTITIONS
diff --git a/drivers/mtd/nand/Makefile b/drivers/mtd/nand/Makefile
index a6e74a46992a..b786c5da82da 100644
--- a/drivers/mtd/nand/Makefile
+++ b/drivers/mtd/nand/Makefile
@@ -1,7 +1,6 @@
 #
 # linux/drivers/nand/Makefile
 #
-# $Id: Makefile.common,v 1.15 2004/11/26 12:28:22 dedekind Exp $
 
 obj-$(CONFIG_MTD_NAND)			+= nand.o nand_ecc.o
 obj-$(CONFIG_MTD_NAND_IDS)		+= nand_ids.o
@@ -24,10 +23,11 @@ obj-$(CONFIG_MTD_NAND_TS7250)		+= ts7250.o
 obj-$(CONFIG_MTD_NAND_NANDSIM)		+= nandsim.o
 obj-$(CONFIG_MTD_NAND_CS553X)		+= cs553x_nand.o
 obj-$(CONFIG_MTD_NAND_NDFC)		+= ndfc.o
-obj-$(CONFIG_MTD_NAND_AT91)		+= at91_nand.o
+obj-$(CONFIG_MTD_NAND_ATMEL)		+= atmel_nand.o
 obj-$(CONFIG_MTD_NAND_CM_X270)		+= cmx270_nand.o
 obj-$(CONFIG_MTD_NAND_BASLER_EXCITE)	+= excite_nandflash.o
 obj-$(CONFIG_MTD_NAND_PXA3xx)		+= pxa3xx_nand.o
+obj-$(CONFIG_MTD_NAND_TMIO)		+= tmio_nand.o
 obj-$(CONFIG_MTD_NAND_PLATFORM)		+= plat_nand.o
 obj-$(CONFIG_MTD_ALAUDA)		+= alauda.o
 obj-$(CONFIG_MTD_NAND_PASEMI)		+= pasemi_nand.o
diff --git a/drivers/mtd/nand/ams-delta.c b/drivers/mtd/nand/ams-delta.c
index a0ba07c36ee9..26d42987971f 100644
--- a/drivers/mtd/nand/ams-delta.c
+++ b/drivers/mtd/nand/ams-delta.c
@@ -22,10 +22,10 @@
 #include <linux/mtd/nand.h>
 #include <linux/mtd/partitions.h>
 #include <asm/io.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/sizes.h>
-#include <asm/arch/gpio.h>
-#include <asm/arch/board-ams-delta.h>
+#include <mach/gpio.h>
+#include <mach/board-ams-delta.h>
 
 /*
  * MTD structure for E3 (Delta)
diff --git a/drivers/mtd/nand/at91_nand.c b/drivers/mtd/nand/at91_nand.c
deleted file mode 100644
index 0adb287027a2..000000000000
--- a/drivers/mtd/nand/at91_nand.c
+++ /dev/null
@@ -1,594 +0,0 @@
-/*
- * drivers/mtd/nand/at91_nand.c
- *
- *  Copyright (C) 2003 Rick Bronson
- *
- *  Derived from drivers/mtd/nand/autcpu12.c
- *	 Copyright (c) 2001 Thomas Gleixner (gleixner@autronix.de)
- *
- *  Derived from drivers/mtd/spia.c
- *	 Copyright (C) 2000 Steven J. Hill (sjhill@cotw.com)
- *
- *
- *  Add Hardware ECC support for AT91SAM9260 / AT91SAM9263
- *     Richard Genoud (richard.genoud@gmail.com), Adeneo Copyright (C) 2007
- *
- *     Derived from Das U-Boot source code
- *     		(u-boot-1.1.5/board/atmel/at91sam9263ek/nand.c)
- *     (C) Copyright 2006 ATMEL Rousset, Lacressonniere Nicolas
- *
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-
-#include <linux/slab.h>
-#include <linux/module.h>
-#include <linux/platform_device.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/nand.h>
-#include <linux/mtd/partitions.h>
-
-#include <asm/io.h>
-#include <asm/sizes.h>
-
-#include <asm/hardware.h>
-#include <asm/arch/board.h>
-#include <asm/arch/gpio.h>
-
-#ifdef CONFIG_MTD_NAND_AT91_ECC_HW
-#define hard_ecc	1
-#else
-#define hard_ecc	0
-#endif
-
-#ifdef CONFIG_MTD_NAND_AT91_ECC_NONE
-#define no_ecc		1
-#else
-#define no_ecc		0
-#endif
-
-/* Register access macros */
-#define ecc_readl(add, reg)				\
-	__raw_readl(add + AT91_ECC_##reg)
-#define ecc_writel(add, reg, value)			\
-	__raw_writel((value), add + AT91_ECC_##reg)
-
-#include <asm/arch/at91_ecc.h> /* AT91SAM9260/3 ECC registers */
-
-/* oob layout for large page size
- * bad block info is on bytes 0 and 1
- * the bytes have to be consecutives to avoid
- * several NAND_CMD_RNDOUT during read
- */
-static struct nand_ecclayout at91_oobinfo_large = {
-	.eccbytes = 4,
-	.eccpos = {60, 61, 62, 63},
-	.oobfree = {
-		{2, 58}
-	},
-};
-
-/* oob layout for small page size
- * bad block info is on bytes 4 and 5
- * the bytes have to be consecutives to avoid
- * several NAND_CMD_RNDOUT during read
- */
-static struct nand_ecclayout at91_oobinfo_small = {
-	.eccbytes = 4,
-	.eccpos = {0, 1, 2, 3},
-	.oobfree = {
-		{6, 10}
-	},
-};
-
-struct at91_nand_host {
-	struct nand_chip	nand_chip;
-	struct mtd_info		mtd;
-	void __iomem		*io_base;
-	struct at91_nand_data	*board;
-	struct device		*dev;
-	void __iomem		*ecc;
-};
-
-/*
- * Enable NAND.
- */
-static void at91_nand_enable(struct at91_nand_host *host)
-{
-	if (host->board->enable_pin)
-		at91_set_gpio_value(host->board->enable_pin, 0);
-}
-
-/*
- * Disable NAND.
- */
-static void at91_nand_disable(struct at91_nand_host *host)
-{
-	if (host->board->enable_pin)
-		at91_set_gpio_value(host->board->enable_pin, 1);
-}
-
-/*
- * Hardware specific access to control-lines
- */
-static void at91_nand_cmd_ctrl(struct mtd_info *mtd, int cmd, unsigned int ctrl)
-{
-	struct nand_chip *nand_chip = mtd->priv;
-	struct at91_nand_host *host = nand_chip->priv;
-
-	if (ctrl & NAND_CTRL_CHANGE) {
-		if (ctrl & NAND_NCE)
-			at91_nand_enable(host);
-		else
-			at91_nand_disable(host);
-	}
-	if (cmd == NAND_CMD_NONE)
-		return;
-
-	if (ctrl & NAND_CLE)
-		writeb(cmd, host->io_base + (1 << host->board->cle));
-	else
-		writeb(cmd, host->io_base + (1 << host->board->ale));
-}
-
-/*
- * Read the Device Ready pin.
- */
-static int at91_nand_device_ready(struct mtd_info *mtd)
-{
-	struct nand_chip *nand_chip = mtd->priv;
-	struct at91_nand_host *host = nand_chip->priv;
-
-	return at91_get_gpio_value(host->board->rdy_pin);
-}
-
-/*
- * write oob for small pages
- */
-static int at91_nand_write_oob_512(struct mtd_info *mtd,
-		struct nand_chip *chip, int page)
-{
-	int chunk = chip->ecc.bytes + chip->ecc.prepad + chip->ecc.postpad;
-	int eccsize = chip->ecc.size, length = mtd->oobsize;
-	int len, pos, status = 0;
-	const uint8_t *bufpoi = chip->oob_poi;
-
-	pos = eccsize + chunk;
-
-	chip->cmdfunc(mtd, NAND_CMD_SEQIN, pos, page);
-	len = min_t(int, length, chunk);
-	chip->write_buf(mtd, bufpoi, len);
-	bufpoi += len;
-	length -= len;
-	if (length > 0)
-		chip->write_buf(mtd, bufpoi, length);
-
-	chip->cmdfunc(mtd, NAND_CMD_PAGEPROG, -1, -1);
-	status = chip->waitfunc(mtd, chip);
-
-	return status & NAND_STATUS_FAIL ? -EIO : 0;
-
-}
-
-/*
- * read oob for small pages
- */
-static int at91_nand_read_oob_512(struct mtd_info *mtd,
-		struct nand_chip *chip,	int page, int sndcmd)
-{
-	if (sndcmd) {
-		chip->cmdfunc(mtd, NAND_CMD_READOOB, 0, page);
-		sndcmd = 0;
-	}
-	chip->read_buf(mtd, chip->oob_poi, mtd->oobsize);
-	return sndcmd;
-}
-
-/*
- * Calculate HW ECC
- *
- * function called after a write
- *
- * mtd:        MTD block structure
- * dat:        raw data (unused)
- * ecc_code:   buffer for ECC
- */
-static int at91_nand_calculate(struct mtd_info *mtd,
-		const u_char *dat, unsigned char *ecc_code)
-{
-	struct nand_chip *nand_chip = mtd->priv;
-	struct at91_nand_host *host = nand_chip->priv;
-	uint32_t *eccpos = nand_chip->ecc.layout->eccpos;
-	unsigned int ecc_value;
-
-	/* get the first 2 ECC bytes */
-	ecc_value = ecc_readl(host->ecc, PR);
-
-	ecc_code[eccpos[0]] = ecc_value & 0xFF;
-	ecc_code[eccpos[1]] = (ecc_value >> 8) & 0xFF;
-
-	/* get the last 2 ECC bytes */
-	ecc_value = ecc_readl(host->ecc, NPR) & AT91_ECC_NPARITY;
-
-	ecc_code[eccpos[2]] = ecc_value & 0xFF;
-	ecc_code[eccpos[3]] = (ecc_value >> 8) & 0xFF;
-
-	return 0;
-}
-
-/*
- * HW ECC read page function
- *
- * mtd:        mtd info structure
- * chip:       nand chip info structure
- * buf:        buffer to store read data
- */
-static int at91_nand_read_page(struct mtd_info *mtd,
-		struct nand_chip *chip, uint8_t *buf)
-{
-	int eccsize = chip->ecc.size;
-	int eccbytes = chip->ecc.bytes;
-	uint32_t *eccpos = chip->ecc.layout->eccpos;
-	uint8_t *p = buf;
-	uint8_t *oob = chip->oob_poi;
-	uint8_t *ecc_pos;
-	int stat;
-
-	/* read the page */
-	chip->read_buf(mtd, p, eccsize);
-
-	/* move to ECC position if needed */
-	if (eccpos[0] != 0) {
-		/* This only works on large pages
-		 * because the ECC controller waits for
-		 * NAND_CMD_RNDOUTSTART after the
-		 * NAND_CMD_RNDOUT.
-		 * anyway, for small pages, the eccpos[0] == 0
-		 */
-		chip->cmdfunc(mtd, NAND_CMD_RNDOUT,
-				mtd->writesize + eccpos[0], -1);
-	}
-
-	/* the ECC controller needs to read the ECC just after the data */
-	ecc_pos = oob + eccpos[0];
-	chip->read_buf(mtd, ecc_pos, eccbytes);
-
-	/* check if there's an error */
-	stat = chip->ecc.correct(mtd, p, oob, NULL);
-
-	if (stat < 0)
-		mtd->ecc_stats.failed++;
-	else
-		mtd->ecc_stats.corrected += stat;
-
-	/* get back to oob start (end of page) */
-	chip->cmdfunc(mtd, NAND_CMD_RNDOUT, mtd->writesize, -1);
-
-	/* read the oob */
-	chip->read_buf(mtd, oob, mtd->oobsize);
-
-	return 0;
-}
-
-/*
- * HW ECC Correction
- *
- * function called after a read
- *
- * mtd:        MTD block structure
- * dat:        raw data read from the chip
- * read_ecc:   ECC from the chip (unused)
- * isnull:     unused
- *
- * Detect and correct a 1 bit error for a page
- */
-static int at91_nand_correct(struct mtd_info *mtd, u_char *dat,
-		u_char *read_ecc, u_char *isnull)
-{
-	struct nand_chip *nand_chip = mtd->priv;
-	struct at91_nand_host *host = nand_chip->priv;
-	unsigned int ecc_status;
-	unsigned int ecc_word, ecc_bit;
-
-	/* get the status from the Status Register */
-	ecc_status = ecc_readl(host->ecc, SR);
-
-	/* if there's no error */
-	if (likely(!(ecc_status & AT91_ECC_RECERR)))
-		return 0;
-
-	/* get error bit offset (4 bits) */
-	ecc_bit = ecc_readl(host->ecc, PR) & AT91_ECC_BITADDR;
-	/* get word address (12 bits) */
-	ecc_word = ecc_readl(host->ecc, PR) & AT91_ECC_WORDADDR;
-	ecc_word >>= 4;
-
-	/* if there are multiple errors */
-	if (ecc_status & AT91_ECC_MULERR) {
-		/* check if it is a freshly erased block
-		 * (filled with 0xff) */
-		if ((ecc_bit == AT91_ECC_BITADDR)
-				&& (ecc_word == (AT91_ECC_WORDADDR >> 4))) {
-			/* the block has just been erased, return OK */
-			return 0;
-		}
-		/* it doesn't seems to be a freshly
-		 * erased block.
-		 * We can't correct so many errors */
-		dev_dbg(host->dev, "at91_nand : multiple errors detected."
-				" Unable to correct.\n");
-		return -EIO;
-	}
-
-	/* if there's a single bit error : we can correct it */
-	if (ecc_status & AT91_ECC_ECCERR) {
-		/* there's nothing much to do here.
-		 * the bit error is on the ECC itself.
-		 */
-		dev_dbg(host->dev, "at91_nand : one bit error on ECC code."
-				" Nothing to correct\n");
-		return 0;
-	}
-
-	dev_dbg(host->dev, "at91_nand : one bit error on data."
-			" (word offset in the page :"
-			" 0x%x bit offset : 0x%x)\n",
-			ecc_word, ecc_bit);
-	/* correct the error */
-	if (nand_chip->options & NAND_BUSWIDTH_16) {
-		/* 16 bits words */
-		((unsigned short *) dat)[ecc_word] ^= (1 << ecc_bit);
-	} else {
-		/* 8 bits words */
-		dat[ecc_word] ^= (1 << ecc_bit);
-	}
-	dev_dbg(host->dev, "at91_nand : error corrected\n");
-	return 1;
-}
-
-/*
- * Enable HW ECC : unsused
- */
-static void at91_nand_hwctl(struct mtd_info *mtd, int mode) { ; }
-
-#ifdef CONFIG_MTD_PARTITIONS
-static const char *part_probes[] = { "cmdlinepart", NULL };
-#endif
-
-/*
- * Probe for the NAND device.
- */
-static int __init at91_nand_probe(struct platform_device *pdev)
-{
-	struct at91_nand_host *host;
-	struct mtd_info *mtd;
-	struct nand_chip *nand_chip;
-	struct resource *regs;
-	struct resource *mem;
-	int res;
-
-#ifdef CONFIG_MTD_PARTITIONS
-	struct mtd_partition *partitions = NULL;
-	int num_partitions = 0;
-#endif
-
-	/* Allocate memory for the device structure (and zero it) */
-	host = kzalloc(sizeof(struct at91_nand_host), GFP_KERNEL);
-	if (!host) {
-		printk(KERN_ERR "at91_nand: failed to allocate device structure.\n");
-		return -ENOMEM;
-	}
-
-	mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	if (!mem) {
-		printk(KERN_ERR "at91_nand: can't get I/O resource mem\n");
-		return -ENXIO;
-	}
-
-	host->io_base = ioremap(mem->start, mem->end - mem->start + 1);
-	if (host->io_base == NULL) {
-		printk(KERN_ERR "at91_nand: ioremap failed\n");
-		kfree(host);
-		return -EIO;
-	}
-
-	mtd = &host->mtd;
-	nand_chip = &host->nand_chip;
-	host->board = pdev->dev.platform_data;
-	host->dev = &pdev->dev;
-
-	nand_chip->priv = host;		/* link the private data structures */
-	mtd->priv = nand_chip;
-	mtd->owner = THIS_MODULE;
-
-	/* Set address of NAND IO lines */
-	nand_chip->IO_ADDR_R = host->io_base;
-	nand_chip->IO_ADDR_W = host->io_base;
-	nand_chip->cmd_ctrl = at91_nand_cmd_ctrl;
-
-	if (host->board->rdy_pin)
-		nand_chip->dev_ready = at91_nand_device_ready;
-
-	regs = platform_get_resource(pdev, IORESOURCE_MEM, 1);
-	if (!regs && hard_ecc) {
-		printk(KERN_ERR "at91_nand: can't get I/O resource "
-				"regs\nFalling back on software ECC\n");
-	}
-
-	nand_chip->ecc.mode = NAND_ECC_SOFT;	/* enable ECC */
-	if (no_ecc)
-		nand_chip->ecc.mode = NAND_ECC_NONE;
-	if (hard_ecc && regs) {
-		host->ecc = ioremap(regs->start, regs->end - regs->start + 1);
-		if (host->ecc == NULL) {
-			printk(KERN_ERR "at91_nand: ioremap failed\n");
-			res = -EIO;
-			goto err_ecc_ioremap;
-		}
-		nand_chip->ecc.mode = NAND_ECC_HW_SYNDROME;
-		nand_chip->ecc.calculate = at91_nand_calculate;
-		nand_chip->ecc.correct = at91_nand_correct;
-		nand_chip->ecc.hwctl = at91_nand_hwctl;
-		nand_chip->ecc.read_page = at91_nand_read_page;
-		nand_chip->ecc.bytes = 4;
-		nand_chip->ecc.prepad = 0;
-		nand_chip->ecc.postpad = 0;
-	}
-
-	nand_chip->chip_delay = 20;		/* 20us command delay time */
-
-	if (host->board->bus_width_16)		/* 16-bit bus width */
-		nand_chip->options |= NAND_BUSWIDTH_16;
-
-	platform_set_drvdata(pdev, host);
-	at91_nand_enable(host);
-
-	if (host->board->det_pin) {
-		if (at91_get_gpio_value(host->board->det_pin)) {
-			printk ("No SmartMedia card inserted.\n");
-			res = ENXIO;
-			goto out;
-		}
-	}
-
-	/* first scan to find the device and get the page size */
-	if (nand_scan_ident(mtd, 1)) {
-		res = -ENXIO;
-		goto out;
-	}
-
-	if (nand_chip->ecc.mode == NAND_ECC_HW_SYNDROME) {
-		/* ECC is calculated for the whole page (1 step) */
-		nand_chip->ecc.size = mtd->writesize;
-
-		/* set ECC page size and oob layout */
-		switch (mtd->writesize) {
-		case 512:
-			nand_chip->ecc.layout = &at91_oobinfo_small;
-			nand_chip->ecc.read_oob = at91_nand_read_oob_512;
-			nand_chip->ecc.write_oob = at91_nand_write_oob_512;
-			ecc_writel(host->ecc, MR, AT91_ECC_PAGESIZE_528);
-			break;
-		case 1024:
-			nand_chip->ecc.layout = &at91_oobinfo_large;
-			ecc_writel(host->ecc, MR, AT91_ECC_PAGESIZE_1056);
-			break;
-		case 2048:
-			nand_chip->ecc.layout = &at91_oobinfo_large;
-			ecc_writel(host->ecc, MR, AT91_ECC_PAGESIZE_2112);
-			break;
-		case 4096:
-			nand_chip->ecc.layout = &at91_oobinfo_large;
-			ecc_writel(host->ecc, MR, AT91_ECC_PAGESIZE_4224);
-			break;
-		default:
-			/* page size not handled by HW ECC */
-			/* switching back to soft ECC */
-			nand_chip->ecc.mode = NAND_ECC_SOFT;
-			nand_chip->ecc.calculate = NULL;
-			nand_chip->ecc.correct = NULL;
-			nand_chip->ecc.hwctl = NULL;
-			nand_chip->ecc.read_page = NULL;
-			nand_chip->ecc.postpad = 0;
-			nand_chip->ecc.prepad = 0;
-			nand_chip->ecc.bytes = 0;
-			break;
-		}
-	}
-
-	/* second phase scan */
-	if (nand_scan_tail(mtd)) {
-		res = -ENXIO;
-		goto out;
-	}
-
-#ifdef CONFIG_MTD_PARTITIONS
-#ifdef CONFIG_MTD_CMDLINE_PARTS
-	mtd->name = "at91_nand";
-	num_partitions = parse_mtd_partitions(mtd, part_probes,
-					      &partitions, 0);
-#endif
-	if (num_partitions <= 0 && host->board->partition_info)
-		partitions = host->board->partition_info(mtd->size,
-							 &num_partitions);
-
-	if ((!partitions) || (num_partitions == 0)) {
-		printk(KERN_ERR "at91_nand: No parititions defined, or unsupported device.\n");
-		res = ENXIO;
-		goto release;
-	}
-
-	res = add_mtd_partitions(mtd, partitions, num_partitions);
-#else
-	res = add_mtd_device(mtd);
-#endif
-
-	if (!res)
-		return res;
-
-#ifdef CONFIG_MTD_PARTITIONS
-release:
-#endif
-	nand_release(mtd);
-
-out:
-	iounmap(host->ecc);
-
-err_ecc_ioremap:
-	at91_nand_disable(host);
-	platform_set_drvdata(pdev, NULL);
-	iounmap(host->io_base);
-	kfree(host);
-	return res;
-}
-
-/*
- * Remove a NAND device.
- */
-static int __devexit at91_nand_remove(struct platform_device *pdev)
-{
-	struct at91_nand_host *host = platform_get_drvdata(pdev);
-	struct mtd_info *mtd = &host->mtd;
-
-	nand_release(mtd);
-
-	at91_nand_disable(host);
-
-	iounmap(host->io_base);
-	iounmap(host->ecc);
-	kfree(host);
-
-	return 0;
-}
-
-static struct platform_driver at91_nand_driver = {
-	.probe		= at91_nand_probe,
-	.remove		= at91_nand_remove,
-	.driver		= {
-		.name	= "at91_nand",
-		.owner	= THIS_MODULE,
-	},
-};
-
-static int __init at91_nand_init(void)
-{
-	return platform_driver_register(&at91_nand_driver);
-}
-
-
-static void __exit at91_nand_exit(void)
-{
-	platform_driver_unregister(&at91_nand_driver);
-}
-
-
-module_init(at91_nand_init);
-module_exit(at91_nand_exit);
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Rick Bronson");
-MODULE_DESCRIPTION("NAND/SmartMedia driver for AT91RM9200 / AT91SAM9");
-MODULE_ALIAS("platform:at91_nand");
diff --git a/drivers/mtd/nand/atmel_nand.c b/drivers/mtd/nand/atmel_nand.c
new file mode 100644
index 000000000000..3387e0d5076b
--- /dev/null
+++ b/drivers/mtd/nand/atmel_nand.c
@@ -0,0 +1,650 @@
+/*
+ *  Copyright (C) 2003 Rick Bronson
+ *
+ *  Derived from drivers/mtd/nand/autcpu12.c
+ *	 Copyright (c) 2001 Thomas Gleixner (gleixner@autronix.de)
+ *
+ *  Derived from drivers/mtd/spia.c
+ *	 Copyright (C) 2000 Steven J. Hill (sjhill@cotw.com)
+ *
+ *
+ *  Add Hardware ECC support for AT91SAM9260 / AT91SAM9263
+ *     Richard Genoud (richard.genoud@gmail.com), Adeneo Copyright (C) 2007
+ *
+ *     Derived from Das U-Boot source code
+ *     		(u-boot-1.1.5/board/atmel/at91sam9263ek/nand.c)
+ *     (C) Copyright 2006 ATMEL Rousset, Lacressonniere Nicolas
+ *
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/slab.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/nand.h>
+#include <linux/mtd/partitions.h>
+
+#include <linux/gpio.h>
+#include <linux/io.h>
+
+#include <mach/board.h>
+#include <mach/cpu.h>
+
+#ifdef CONFIG_MTD_NAND_ATMEL_ECC_HW
+#define hard_ecc	1
+#else
+#define hard_ecc	0
+#endif
+
+#ifdef CONFIG_MTD_NAND_ATMEL_ECC_NONE
+#define no_ecc		1
+#else
+#define no_ecc		0
+#endif
+
+/* Register access macros */
+#define ecc_readl(add, reg)				\
+	__raw_readl(add + ATMEL_ECC_##reg)
+#define ecc_writel(add, reg, value)			\
+	__raw_writel((value), add + ATMEL_ECC_##reg)
+
+#include "atmel_nand_ecc.h"	/* Hardware ECC registers */
+
+/* oob layout for large page size
+ * bad block info is on bytes 0 and 1
+ * the bytes have to be consecutives to avoid
+ * several NAND_CMD_RNDOUT during read
+ */
+static struct nand_ecclayout atmel_oobinfo_large = {
+	.eccbytes = 4,
+	.eccpos = {60, 61, 62, 63},
+	.oobfree = {
+		{2, 58}
+	},
+};
+
+/* oob layout for small page size
+ * bad block info is on bytes 4 and 5
+ * the bytes have to be consecutives to avoid
+ * several NAND_CMD_RNDOUT during read
+ */
+static struct nand_ecclayout atmel_oobinfo_small = {
+	.eccbytes = 4,
+	.eccpos = {0, 1, 2, 3},
+	.oobfree = {
+		{6, 10}
+	},
+};
+
+struct atmel_nand_host {
+	struct nand_chip	nand_chip;
+	struct mtd_info		mtd;
+	void __iomem		*io_base;
+	struct atmel_nand_data	*board;
+	struct device		*dev;
+	void __iomem		*ecc;
+};
+
+/*
+ * Enable NAND.
+ */
+static void atmel_nand_enable(struct atmel_nand_host *host)
+{
+	if (host->board->enable_pin)
+		gpio_set_value(host->board->enable_pin, 0);
+}
+
+/*
+ * Disable NAND.
+ */
+static void atmel_nand_disable(struct atmel_nand_host *host)
+{
+	if (host->board->enable_pin)
+		gpio_set_value(host->board->enable_pin, 1);
+}
+
+/*
+ * Hardware specific access to control-lines
+ */
+static void atmel_nand_cmd_ctrl(struct mtd_info *mtd, int cmd, unsigned int ctrl)
+{
+	struct nand_chip *nand_chip = mtd->priv;
+	struct atmel_nand_host *host = nand_chip->priv;
+
+	if (ctrl & NAND_CTRL_CHANGE) {
+		if (ctrl & NAND_NCE)
+			atmel_nand_enable(host);
+		else
+			atmel_nand_disable(host);
+	}
+	if (cmd == NAND_CMD_NONE)
+		return;
+
+	if (ctrl & NAND_CLE)
+		writeb(cmd, host->io_base + (1 << host->board->cle));
+	else
+		writeb(cmd, host->io_base + (1 << host->board->ale));
+}
+
+/*
+ * Read the Device Ready pin.
+ */
+static int atmel_nand_device_ready(struct mtd_info *mtd)
+{
+	struct nand_chip *nand_chip = mtd->priv;
+	struct atmel_nand_host *host = nand_chip->priv;
+
+	return gpio_get_value(host->board->rdy_pin);
+}
+
+/*
+ * Minimal-overhead PIO for data access.
+ */
+static void atmel_read_buf(struct mtd_info *mtd, u8 *buf, int len)
+{
+	struct nand_chip	*nand_chip = mtd->priv;
+
+	__raw_readsb(nand_chip->IO_ADDR_R, buf, len);
+}
+
+static void atmel_read_buf16(struct mtd_info *mtd, u8 *buf, int len)
+{
+	struct nand_chip	*nand_chip = mtd->priv;
+
+	__raw_readsw(nand_chip->IO_ADDR_R, buf, len / 2);
+}
+
+static void atmel_write_buf(struct mtd_info *mtd, const u8 *buf, int len)
+{
+	struct nand_chip	*nand_chip = mtd->priv;
+
+	__raw_writesb(nand_chip->IO_ADDR_W, buf, len);
+}
+
+static void atmel_write_buf16(struct mtd_info *mtd, const u8 *buf, int len)
+{
+	struct nand_chip	*nand_chip = mtd->priv;
+
+	__raw_writesw(nand_chip->IO_ADDR_W, buf, len / 2);
+}
+
+/*
+ * write oob for small pages
+ */
+static int atmel_nand_write_oob_512(struct mtd_info *mtd,
+		struct nand_chip *chip, int page)
+{
+	int chunk = chip->ecc.bytes + chip->ecc.prepad + chip->ecc.postpad;
+	int eccsize = chip->ecc.size, length = mtd->oobsize;
+	int len, pos, status = 0;
+	const uint8_t *bufpoi = chip->oob_poi;
+
+	pos = eccsize + chunk;
+
+	chip->cmdfunc(mtd, NAND_CMD_SEQIN, pos, page);
+	len = min_t(int, length, chunk);
+	chip->write_buf(mtd, bufpoi, len);
+	bufpoi += len;
+	length -= len;
+	if (length > 0)
+		chip->write_buf(mtd, bufpoi, length);
+
+	chip->cmdfunc(mtd, NAND_CMD_PAGEPROG, -1, -1);
+	status = chip->waitfunc(mtd, chip);
+
+	return status & NAND_STATUS_FAIL ? -EIO : 0;
+
+}
+
+/*
+ * read oob for small pages
+ */
+static int atmel_nand_read_oob_512(struct mtd_info *mtd,
+		struct nand_chip *chip,	int page, int sndcmd)
+{
+	if (sndcmd) {
+		chip->cmdfunc(mtd, NAND_CMD_READOOB, 0, page);
+		sndcmd = 0;
+	}
+	chip->read_buf(mtd, chip->oob_poi, mtd->oobsize);
+	return sndcmd;
+}
+
+/*
+ * Calculate HW ECC
+ *
+ * function called after a write
+ *
+ * mtd:        MTD block structure
+ * dat:        raw data (unused)
+ * ecc_code:   buffer for ECC
+ */
+static int atmel_nand_calculate(struct mtd_info *mtd,
+		const u_char *dat, unsigned char *ecc_code)
+{
+	struct nand_chip *nand_chip = mtd->priv;
+	struct atmel_nand_host *host = nand_chip->priv;
+	uint32_t *eccpos = nand_chip->ecc.layout->eccpos;
+	unsigned int ecc_value;
+
+	/* get the first 2 ECC bytes */
+	ecc_value = ecc_readl(host->ecc, PR);
+
+	ecc_code[eccpos[0]] = ecc_value & 0xFF;
+	ecc_code[eccpos[1]] = (ecc_value >> 8) & 0xFF;
+
+	/* get the last 2 ECC bytes */
+	ecc_value = ecc_readl(host->ecc, NPR) & ATMEL_ECC_NPARITY;
+
+	ecc_code[eccpos[2]] = ecc_value & 0xFF;
+	ecc_code[eccpos[3]] = (ecc_value >> 8) & 0xFF;
+
+	return 0;
+}
+
+/*
+ * HW ECC read page function
+ *
+ * mtd:        mtd info structure
+ * chip:       nand chip info structure
+ * buf:        buffer to store read data
+ */
+static int atmel_nand_read_page(struct mtd_info *mtd,
+		struct nand_chip *chip, uint8_t *buf)
+{
+	int eccsize = chip->ecc.size;
+	int eccbytes = chip->ecc.bytes;
+	uint32_t *eccpos = chip->ecc.layout->eccpos;
+	uint8_t *p = buf;
+	uint8_t *oob = chip->oob_poi;
+	uint8_t *ecc_pos;
+	int stat;
+
+	/*
+	 * Errata: ALE is incorrectly wired up to the ECC controller
+	 * on the AP7000, so it will include the address cycles in the
+	 * ECC calculation.
+	 *
+	 * Workaround: Reset the parity registers before reading the
+	 * actual data.
+	 */
+	if (cpu_is_at32ap7000()) {
+		struct atmel_nand_host *host = chip->priv;
+		ecc_writel(host->ecc, CR, ATMEL_ECC_RST);
+	}
+
+	/* read the page */
+	chip->read_buf(mtd, p, eccsize);
+
+	/* move to ECC position if needed */
+	if (eccpos[0] != 0) {
+		/* This only works on large pages
+		 * because the ECC controller waits for
+		 * NAND_CMD_RNDOUTSTART after the
+		 * NAND_CMD_RNDOUT.
+		 * anyway, for small pages, the eccpos[0] == 0
+		 */
+		chip->cmdfunc(mtd, NAND_CMD_RNDOUT,
+				mtd->writesize + eccpos[0], -1);
+	}
+
+	/* the ECC controller needs to read the ECC just after the data */
+	ecc_pos = oob + eccpos[0];
+	chip->read_buf(mtd, ecc_pos, eccbytes);
+
+	/* check if there's an error */
+	stat = chip->ecc.correct(mtd, p, oob, NULL);
+
+	if (stat < 0)
+		mtd->ecc_stats.failed++;
+	else
+		mtd->ecc_stats.corrected += stat;
+
+	/* get back to oob start (end of page) */
+	chip->cmdfunc(mtd, NAND_CMD_RNDOUT, mtd->writesize, -1);
+
+	/* read the oob */
+	chip->read_buf(mtd, oob, mtd->oobsize);
+
+	return 0;
+}
+
+/*
+ * HW ECC Correction
+ *
+ * function called after a read
+ *
+ * mtd:        MTD block structure
+ * dat:        raw data read from the chip
+ * read_ecc:   ECC from the chip (unused)
+ * isnull:     unused
+ *
+ * Detect and correct a 1 bit error for a page
+ */
+static int atmel_nand_correct(struct mtd_info *mtd, u_char *dat,
+		u_char *read_ecc, u_char *isnull)
+{
+	struct nand_chip *nand_chip = mtd->priv;
+	struct atmel_nand_host *host = nand_chip->priv;
+	unsigned int ecc_status;
+	unsigned int ecc_word, ecc_bit;
+
+	/* get the status from the Status Register */
+	ecc_status = ecc_readl(host->ecc, SR);
+
+	/* if there's no error */
+	if (likely(!(ecc_status & ATMEL_ECC_RECERR)))
+		return 0;
+
+	/* get error bit offset (4 bits) */
+	ecc_bit = ecc_readl(host->ecc, PR) & ATMEL_ECC_BITADDR;
+	/* get word address (12 bits) */
+	ecc_word = ecc_readl(host->ecc, PR) & ATMEL_ECC_WORDADDR;
+	ecc_word >>= 4;
+
+	/* if there are multiple errors */
+	if (ecc_status & ATMEL_ECC_MULERR) {
+		/* check if it is a freshly erased block
+		 * (filled with 0xff) */
+		if ((ecc_bit == ATMEL_ECC_BITADDR)
+				&& (ecc_word == (ATMEL_ECC_WORDADDR >> 4))) {
+			/* the block has just been erased, return OK */
+			return 0;
+		}
+		/* it doesn't seems to be a freshly
+		 * erased block.
+		 * We can't correct so many errors */
+		dev_dbg(host->dev, "atmel_nand : multiple errors detected."
+				" Unable to correct.\n");
+		return -EIO;
+	}
+
+	/* if there's a single bit error : we can correct it */
+	if (ecc_status & ATMEL_ECC_ECCERR) {
+		/* there's nothing much to do here.
+		 * the bit error is on the ECC itself.
+		 */
+		dev_dbg(host->dev, "atmel_nand : one bit error on ECC code."
+				" Nothing to correct\n");
+		return 0;
+	}
+
+	dev_dbg(host->dev, "atmel_nand : one bit error on data."
+			" (word offset in the page :"
+			" 0x%x bit offset : 0x%x)\n",
+			ecc_word, ecc_bit);
+	/* correct the error */
+	if (nand_chip->options & NAND_BUSWIDTH_16) {
+		/* 16 bits words */
+		((unsigned short *) dat)[ecc_word] ^= (1 << ecc_bit);
+	} else {
+		/* 8 bits words */
+		dat[ecc_word] ^= (1 << ecc_bit);
+	}
+	dev_dbg(host->dev, "atmel_nand : error corrected\n");
+	return 1;
+}
+
+/*
+ * Enable HW ECC : unused on most chips
+ */
+static void atmel_nand_hwctl(struct mtd_info *mtd, int mode)
+{
+	if (cpu_is_at32ap7000()) {
+		struct nand_chip *nand_chip = mtd->priv;
+		struct atmel_nand_host *host = nand_chip->priv;
+		ecc_writel(host->ecc, CR, ATMEL_ECC_RST);
+	}
+}
+
+#ifdef CONFIG_MTD_PARTITIONS
+static const char *part_probes[] = { "cmdlinepart", NULL };
+#endif
+
+/*
+ * Probe for the NAND device.
+ */
+static int __init atmel_nand_probe(struct platform_device *pdev)
+{
+	struct atmel_nand_host *host;
+	struct mtd_info *mtd;
+	struct nand_chip *nand_chip;
+	struct resource *regs;
+	struct resource *mem;
+	int res;
+
+#ifdef CONFIG_MTD_PARTITIONS
+	struct mtd_partition *partitions = NULL;
+	int num_partitions = 0;
+#endif
+
+	mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!mem) {
+		printk(KERN_ERR "atmel_nand: can't get I/O resource mem\n");
+		return -ENXIO;
+	}
+
+	/* Allocate memory for the device structure (and zero it) */
+	host = kzalloc(sizeof(struct atmel_nand_host), GFP_KERNEL);
+	if (!host) {
+		printk(KERN_ERR "atmel_nand: failed to allocate device structure.\n");
+		return -ENOMEM;
+	}
+
+	host->io_base = ioremap(mem->start, mem->end - mem->start + 1);
+	if (host->io_base == NULL) {
+		printk(KERN_ERR "atmel_nand: ioremap failed\n");
+		res = -EIO;
+		goto err_nand_ioremap;
+	}
+
+	mtd = &host->mtd;
+	nand_chip = &host->nand_chip;
+	host->board = pdev->dev.platform_data;
+	host->dev = &pdev->dev;
+
+	nand_chip->priv = host;		/* link the private data structures */
+	mtd->priv = nand_chip;
+	mtd->owner = THIS_MODULE;
+
+	/* Set address of NAND IO lines */
+	nand_chip->IO_ADDR_R = host->io_base;
+	nand_chip->IO_ADDR_W = host->io_base;
+	nand_chip->cmd_ctrl = atmel_nand_cmd_ctrl;
+
+	if (host->board->rdy_pin)
+		nand_chip->dev_ready = atmel_nand_device_ready;
+
+	regs = platform_get_resource(pdev, IORESOURCE_MEM, 1);
+	if (!regs && hard_ecc) {
+		printk(KERN_ERR "atmel_nand: can't get I/O resource "
+				"regs\nFalling back on software ECC\n");
+	}
+
+	nand_chip->ecc.mode = NAND_ECC_SOFT;	/* enable ECC */
+	if (no_ecc)
+		nand_chip->ecc.mode = NAND_ECC_NONE;
+	if (hard_ecc && regs) {
+		host->ecc = ioremap(regs->start, regs->end - regs->start + 1);
+		if (host->ecc == NULL) {
+			printk(KERN_ERR "atmel_nand: ioremap failed\n");
+			res = -EIO;
+			goto err_ecc_ioremap;
+		}
+		nand_chip->ecc.mode = NAND_ECC_HW_SYNDROME;
+		nand_chip->ecc.calculate = atmel_nand_calculate;
+		nand_chip->ecc.correct = atmel_nand_correct;
+		nand_chip->ecc.hwctl = atmel_nand_hwctl;
+		nand_chip->ecc.read_page = atmel_nand_read_page;
+		nand_chip->ecc.bytes = 4;
+		nand_chip->ecc.prepad = 0;
+		nand_chip->ecc.postpad = 0;
+	}
+
+	nand_chip->chip_delay = 20;		/* 20us command delay time */
+
+	if (host->board->bus_width_16) {	/* 16-bit bus width */
+		nand_chip->options |= NAND_BUSWIDTH_16;
+		nand_chip->read_buf = atmel_read_buf16;
+		nand_chip->write_buf = atmel_write_buf16;
+	} else {
+		nand_chip->read_buf = atmel_read_buf;
+		nand_chip->write_buf = atmel_write_buf;
+	}
+
+	platform_set_drvdata(pdev, host);
+	atmel_nand_enable(host);
+
+	if (host->board->det_pin) {
+		if (gpio_get_value(host->board->det_pin)) {
+			printk("No SmartMedia card inserted.\n");
+			res = ENXIO;
+			goto err_no_card;
+		}
+	}
+
+	/* first scan to find the device and get the page size */
+	if (nand_scan_ident(mtd, 1)) {
+		res = -ENXIO;
+		goto err_scan_ident;
+	}
+
+	if (nand_chip->ecc.mode == NAND_ECC_HW_SYNDROME) {
+		/* ECC is calculated for the whole page (1 step) */
+		nand_chip->ecc.size = mtd->writesize;
+
+		/* set ECC page size and oob layout */
+		switch (mtd->writesize) {
+		case 512:
+			nand_chip->ecc.layout = &atmel_oobinfo_small;
+			nand_chip->ecc.read_oob = atmel_nand_read_oob_512;
+			nand_chip->ecc.write_oob = atmel_nand_write_oob_512;
+			ecc_writel(host->ecc, MR, ATMEL_ECC_PAGESIZE_528);
+			break;
+		case 1024:
+			nand_chip->ecc.layout = &atmel_oobinfo_large;
+			ecc_writel(host->ecc, MR, ATMEL_ECC_PAGESIZE_1056);
+			break;
+		case 2048:
+			nand_chip->ecc.layout = &atmel_oobinfo_large;
+			ecc_writel(host->ecc, MR, ATMEL_ECC_PAGESIZE_2112);
+			break;
+		case 4096:
+			nand_chip->ecc.layout = &atmel_oobinfo_large;
+			ecc_writel(host->ecc, MR, ATMEL_ECC_PAGESIZE_4224);
+			break;
+		default:
+			/* page size not handled by HW ECC */
+			/* switching back to soft ECC */
+			nand_chip->ecc.mode = NAND_ECC_SOFT;
+			nand_chip->ecc.calculate = NULL;
+			nand_chip->ecc.correct = NULL;
+			nand_chip->ecc.hwctl = NULL;
+			nand_chip->ecc.read_page = NULL;
+			nand_chip->ecc.postpad = 0;
+			nand_chip->ecc.prepad = 0;
+			nand_chip->ecc.bytes = 0;
+			break;
+		}
+	}
+
+	/* second phase scan */
+	if (nand_scan_tail(mtd)) {
+		res = -ENXIO;
+		goto err_scan_tail;
+	}
+
+#ifdef CONFIG_MTD_PARTITIONS
+#ifdef CONFIG_MTD_CMDLINE_PARTS
+	mtd->name = "atmel_nand";
+	num_partitions = parse_mtd_partitions(mtd, part_probes,
+					      &partitions, 0);
+#endif
+	if (num_partitions <= 0 && host->board->partition_info)
+		partitions = host->board->partition_info(mtd->size,
+							 &num_partitions);
+
+	if ((!partitions) || (num_partitions == 0)) {
+		printk(KERN_ERR "atmel_nand: No parititions defined, or unsupported device.\n");
+		res = ENXIO;
+		goto err_no_partitions;
+	}
+
+	res = add_mtd_partitions(mtd, partitions, num_partitions);
+#else
+	res = add_mtd_device(mtd);
+#endif
+
+	if (!res)
+		return res;
+
+#ifdef CONFIG_MTD_PARTITIONS
+err_no_partitions:
+#endif
+	nand_release(mtd);
+err_scan_tail:
+err_scan_ident:
+err_no_card:
+	atmel_nand_disable(host);
+	platform_set_drvdata(pdev, NULL);
+	if (host->ecc)
+		iounmap(host->ecc);
+err_ecc_ioremap:
+	iounmap(host->io_base);
+err_nand_ioremap:
+	kfree(host);
+	return res;
+}
+
+/*
+ * Remove a NAND device.
+ */
+static int __exit atmel_nand_remove(struct platform_device *pdev)
+{
+	struct atmel_nand_host *host = platform_get_drvdata(pdev);
+	struct mtd_info *mtd = &host->mtd;
+
+	nand_release(mtd);
+
+	atmel_nand_disable(host);
+
+	if (host->ecc)
+		iounmap(host->ecc);
+	iounmap(host->io_base);
+	kfree(host);
+
+	return 0;
+}
+
+static struct platform_driver atmel_nand_driver = {
+	.remove		= __exit_p(atmel_nand_remove),
+	.driver		= {
+		.name	= "atmel_nand",
+		.owner	= THIS_MODULE,
+	},
+};
+
+static int __init atmel_nand_init(void)
+{
+	return platform_driver_probe(&atmel_nand_driver, atmel_nand_probe);
+}
+
+
+static void __exit atmel_nand_exit(void)
+{
+	platform_driver_unregister(&atmel_nand_driver);
+}
+
+
+module_init(atmel_nand_init);
+module_exit(atmel_nand_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Rick Bronson");
+MODULE_DESCRIPTION("NAND/SmartMedia driver for AT91 / AVR32");
+MODULE_ALIAS("platform:atmel_nand");
diff --git a/drivers/mtd/nand/atmel_nand_ecc.h b/drivers/mtd/nand/atmel_nand_ecc.h
new file mode 100644
index 000000000000..1ee7f993db1c
--- /dev/null
+++ b/drivers/mtd/nand/atmel_nand_ecc.h
@@ -0,0 +1,36 @@
+/*
+ * Error Corrected Code Controller (ECC) - System peripherals regsters.
+ * Based on AT91SAM9260 datasheet revision B.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#ifndef ATMEL_NAND_ECC_H
+#define ATMEL_NAND_ECC_H
+
+#define ATMEL_ECC_CR		0x00			/* Control register */
+#define		ATMEL_ECC_RST		(1 << 0)		/* Reset parity */
+
+#define ATMEL_ECC_MR		0x04			/* Mode register */
+#define		ATMEL_ECC_PAGESIZE	(3 << 0)		/* Page Size */
+#define			ATMEL_ECC_PAGESIZE_528		(0)
+#define			ATMEL_ECC_PAGESIZE_1056		(1)
+#define			ATMEL_ECC_PAGESIZE_2112		(2)
+#define			ATMEL_ECC_PAGESIZE_4224		(3)
+
+#define ATMEL_ECC_SR		0x08			/* Status register */
+#define		ATMEL_ECC_RECERR		(1 << 0)		/* Recoverable Error */
+#define		ATMEL_ECC_ECCERR		(1 << 1)		/* ECC Single Bit Error */
+#define		ATMEL_ECC_MULERR		(1 << 2)		/* Multiple Errors */
+
+#define ATMEL_ECC_PR		0x0c			/* Parity register */
+#define		ATMEL_ECC_BITADDR	(0xf << 0)		/* Bit Error Address */
+#define		ATMEL_ECC_WORDADDR	(0xfff << 4)		/* Word Error Address */
+
+#define ATMEL_ECC_NPR		0x10			/* NParity register */
+#define		ATMEL_ECC_NPARITY	(0xffff << 0)		/* NParity */
+
+#endif
diff --git a/drivers/mtd/nand/au1550nd.c b/drivers/mtd/nand/au1550nd.c
index 09e421a96893..92c334ff4508 100644
--- a/drivers/mtd/nand/au1550nd.c
+++ b/drivers/mtd/nand/au1550nd.c
@@ -3,8 +3,6 @@
  *
  *  Copyright (C) 2004 Embedded Edge, LLC
  *
- * $Id: au1550nd.c,v 1.13 2005/11/07 11:14:30 gleixner Exp $
- *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
@@ -18,7 +16,6 @@
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/nand.h>
 #include <linux/mtd/partitions.h>
-#include <linux/version.h>
 #include <asm/io.h>
 
 #include <asm/mach-au1x00/au1xxx.h>
@@ -604,8 +601,6 @@ module_init(au1xxx_nand_init);
  */
 static void __exit au1550_cleanup(void)
 {
-	struct nand_chip *this = (struct nand_chip *)&au1550_mtd[1];
-
 	/* Release resources, unregister device */
 	nand_release(au1550_mtd);
 
diff --git a/drivers/mtd/nand/autcpu12.c b/drivers/mtd/nand/autcpu12.c
index dd38011ee0b7..7c95da1f612c 100644
--- a/drivers/mtd/nand/autcpu12.c
+++ b/drivers/mtd/nand/autcpu12.c
@@ -6,8 +6,6 @@
  *  Derived from drivers/mtd/spia.c
  *	 Copyright (C) 2000 Steven J. Hill (sjhill@realitydiluted.com)
  *
- * $Id: autcpu12.c,v 1.23 2005/11/07 11:14:30 gleixner Exp $
- *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
@@ -34,9 +32,9 @@
 #include <linux/mtd/nand.h>
 #include <linux/mtd/partitions.h>
 #include <asm/io.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/sizes.h>
-#include <asm/arch/autcpu12.h>
+#include <mach/autcpu12.h>
 
 /*
  * MTD structure for AUTCPU12 board
diff --git a/drivers/mtd/nand/bf5xx_nand.c b/drivers/mtd/nand/bf5xx_nand.c
index e87a57297328..9af2a2cc1153 100644
--- a/drivers/mtd/nand/bf5xx_nand.c
+++ b/drivers/mtd/nand/bf5xx_nand.c
@@ -91,6 +91,41 @@ static const unsigned short bfin_nfc_pin_req[] =
 	 P_NAND_ALE,
 	 0};
 
+#ifdef CONFIG_MTD_NAND_BF5XX_BOOTROM_ECC
+static uint8_t bbt_pattern[] = { 0xff };
+
+static struct nand_bbt_descr bootrom_bbt = {
+	.options = 0,
+	.offs = 63,
+	.len = 1,
+	.pattern = bbt_pattern,
+};
+
+static struct nand_ecclayout bootrom_ecclayout = {
+	.eccbytes = 24,
+	.eccpos = {
+		0x8 * 0, 0x8 * 0 + 1, 0x8 * 0 + 2,
+		0x8 * 1, 0x8 * 1 + 1, 0x8 * 1 + 2,
+		0x8 * 2, 0x8 * 2 + 1, 0x8 * 2 + 2,
+		0x8 * 3, 0x8 * 3 + 1, 0x8 * 3 + 2,
+		0x8 * 4, 0x8 * 4 + 1, 0x8 * 4 + 2,
+		0x8 * 5, 0x8 * 5 + 1, 0x8 * 5 + 2,
+		0x8 * 6, 0x8 * 6 + 1, 0x8 * 6 + 2,
+		0x8 * 7, 0x8 * 7 + 1, 0x8 * 7 + 2
+	},
+	.oobfree = {
+		{ 0x8 * 0 + 3, 5 },
+		{ 0x8 * 1 + 3, 5 },
+		{ 0x8 * 2 + 3, 5 },
+		{ 0x8 * 3 + 3, 5 },
+		{ 0x8 * 4 + 3, 5 },
+		{ 0x8 * 5 + 3, 5 },
+		{ 0x8 * 6 + 3, 5 },
+		{ 0x8 * 7 + 3, 5 },
+	}
+};
+#endif
+
 /*
  * Data structures for bf5xx nand flash controller driver
  */
@@ -273,7 +308,7 @@ static int bf5xx_nand_correct_data(struct mtd_info *mtd, u_char *dat,
 		dat += 256;
 		read_ecc += 8;
 		calc_ecc += 8;
-		ret = bf5xx_nand_correct_data_256(mtd, dat, read_ecc, calc_ecc);
+		ret |= bf5xx_nand_correct_data_256(mtd, dat, read_ecc, calc_ecc);
 	}
 
 	return ret;
@@ -298,7 +333,7 @@ static int bf5xx_nand_calculate_ecc(struct mtd_info *mtd,
 	ecc0 = bfin_read_NFC_ECC0();
 	ecc1 = bfin_read_NFC_ECC1();
 
-	code[0] = (ecc0 & 0x3FF) | ((ecc1 & 0x3FF) << 11);
+	code[0] = (ecc0 & 0x7ff) | ((ecc1 & 0x7ff) << 11);
 
 	dev_dbg(info->device, "returning ecc 0x%08x\n", code[0]);
 
@@ -310,7 +345,7 @@ static int bf5xx_nand_calculate_ecc(struct mtd_info *mtd,
 	if (page_size == 512) {
 		ecc0 = bfin_read_NFC_ECC2();
 		ecc1 = bfin_read_NFC_ECC3();
-		code[1] = (ecc0 & 0x3FF) | ((ecc1 & 0x3FF) << 11);
+		code[1] = (ecc0 & 0x7ff) | ((ecc1 & 0x7ff) << 11);
 
 		/* second 3 bytes in ecc_code for second 256
 		 * bytes of 512 page size
@@ -514,7 +549,6 @@ static void bf5xx_nand_dma_write_buf(struct mtd_info *mtd,
 /*
  * System initialization functions
  */
-
 static int bf5xx_nand_dma_init(struct bf5xx_nand_info *info)
 {
 	int ret;
@@ -547,6 +581,13 @@ static int bf5xx_nand_dma_init(struct bf5xx_nand_info *info)
 	return 0;
 }
 
+static void bf5xx_nand_dma_remove(struct bf5xx_nand_info *info)
+{
+	/* Free NFC DMA channel */
+	if (hardware_ecc)
+		free_dma(CH_NFC);
+}
+
 /*
  * BF5XX NFC hardware initialization
  *  - pin mux setup
@@ -605,7 +646,7 @@ static int bf5xx_nand_add_partition(struct bf5xx_nand_info *info)
 #endif
 }
 
-static int bf5xx_nand_remove(struct platform_device *pdev)
+static int __devexit bf5xx_nand_remove(struct platform_device *pdev)
 {
 	struct bf5xx_nand_info *info = to_nand_info(pdev);
 	struct mtd_info *mtd = NULL;
@@ -623,6 +664,7 @@ static int bf5xx_nand_remove(struct platform_device *pdev)
 	}
 
 	peripheral_free_list(bfin_nfc_pin_req);
+	bf5xx_nand_dma_remove(info);
 
 	/* free the common resources */
 	kfree(info);
@@ -638,7 +680,7 @@ static int bf5xx_nand_remove(struct platform_device *pdev)
  * it can allocate all necessary resources then calls the
  * nand layer to look for devices
  */
-static int bf5xx_nand_probe(struct platform_device *pdev)
+static int __devinit bf5xx_nand_probe(struct platform_device *pdev)
 {
 	struct bf5xx_nand_platform *plat = to_nand_plat(pdev);
 	struct bf5xx_nand_info *info = NULL;
@@ -648,22 +690,21 @@ static int bf5xx_nand_probe(struct platform_device *pdev)
 
 	dev_dbg(&pdev->dev, "(%p)\n", pdev);
 
-	if (peripheral_request_list(bfin_nfc_pin_req, DRV_NAME)) {
-		printk(KERN_ERR DRV_NAME
-		": Requesting Peripherals failed\n");
-		return -EFAULT;
-	}
-
 	if (!plat) {
 		dev_err(&pdev->dev, "no platform specific information\n");
-		goto exit_error;
+		return -EINVAL;
+	}
+
+	if (peripheral_request_list(bfin_nfc_pin_req, DRV_NAME)) {
+		dev_err(&pdev->dev, "requesting Peripherals failed\n");
+		return -EFAULT;
 	}
 
 	info = kzalloc(sizeof(*info), GFP_KERNEL);
 	if (info == NULL) {
 		dev_err(&pdev->dev, "no memory for flash info\n");
 		err = -ENOMEM;
-		goto exit_error;
+		goto out_err_kzalloc;
 	}
 
 	platform_set_drvdata(pdev, info);
@@ -707,11 +748,16 @@ static int bf5xx_nand_probe(struct platform_device *pdev)
 
 	/* initialise the hardware */
 	err = bf5xx_nand_hw_init(info);
-	if (err != 0)
-		goto exit_error;
+	if (err)
+		goto out_err_hw_init;
 
 	/* setup hardware ECC data struct */
 	if (hardware_ecc) {
+#ifdef CONFIG_MTD_NAND_BF5XX_BOOTROM_ECC
+		chip->badblock_pattern = &bootrom_bbt;
+		chip->ecc.layout = &bootrom_ecclayout;
+#endif
+
 		if (plat->page_size == NFC_PG_SIZE_256) {
 			chip->ecc.bytes = 3;
 			chip->ecc.size = 256;
@@ -733,7 +779,7 @@ static int bf5xx_nand_probe(struct platform_device *pdev)
 	/* scan hardware nand chip and setup mtd info data struct */
 	if (nand_scan(mtd, 1)) {
 		err = -ENXIO;
-		goto exit_error;
+		goto out_err_nand_scan;
 	}
 
 	/* add NAND partition */
@@ -742,11 +788,14 @@ static int bf5xx_nand_probe(struct platform_device *pdev)
 	dev_dbg(&pdev->dev, "initialised ok\n");
 	return 0;
 
-exit_error:
-	bf5xx_nand_remove(pdev);
+out_err_nand_scan:
+	bf5xx_nand_dma_remove(info);
+out_err_hw_init:
+	platform_set_drvdata(pdev, NULL);
+	kfree(info);
+out_err_kzalloc:
+	peripheral_free_list(bfin_nfc_pin_req);
 
-	if (err == 0)
-		err = -EINVAL;
 	return err;
 }
 
@@ -775,7 +824,7 @@ static int bf5xx_nand_resume(struct platform_device *dev)
 /* driver device registration */
 static struct platform_driver bf5xx_nand_driver = {
 	.probe		= bf5xx_nand_probe,
-	.remove		= bf5xx_nand_remove,
+	.remove		= __devexit_p(bf5xx_nand_remove),
 	.suspend	= bf5xx_nand_suspend,
 	.resume		= bf5xx_nand_resume,
 	.driver		= {
diff --git a/drivers/mtd/nand/cafe_nand.c b/drivers/mtd/nand/cafe_nand.c
index da6ceaa80ba1..95345d051579 100644
--- a/drivers/mtd/nand/cafe_nand.c
+++ b/drivers/mtd/nand/cafe_nand.c
@@ -626,10 +626,12 @@ static int __devinit cafe_nand_probe(struct pci_dev *pdev,
 {
 	struct mtd_info *mtd;
 	struct cafe_priv *cafe;
-	struct mtd_partition *parts;
 	uint32_t ctrl;
-	int nr_parts;
 	int err = 0;
+#ifdef CONFIG_MTD_PARTITIONS
+	struct mtd_partition *parts;
+	int nr_parts;
+#endif
 
 	/* Very old versions shared the same PCI ident for all three
 	   functions on the chip. Verify the class too... */
diff --git a/drivers/mtd/nand/cmx270_nand.c b/drivers/mtd/nand/cmx270_nand.c
index fc8529bedfdf..9eba3f04783a 100644
--- a/drivers/mtd/nand/cmx270_nand.c
+++ b/drivers/mtd/nand/cmx270_nand.c
@@ -26,8 +26,8 @@
 #include <asm/irq.h>
 #include <asm/mach-types.h>
 
-#include <asm/arch/hardware.h>
-#include <asm/arch/pxa-regs.h>
+#include <mach/hardware.h>
+#include <mach/pxa-regs.h>
 
 #define GPIO_NAND_CS	(11)
 #define GPIO_NAND_RB	(89)
diff --git a/drivers/mtd/nand/diskonchip.c b/drivers/mtd/nand/diskonchip.c
index 0e72153b3297..e4226e02d63e 100644
--- a/drivers/mtd/nand/diskonchip.c
+++ b/drivers/mtd/nand/diskonchip.c
@@ -15,8 +15,6 @@
  * converted to the generic Reed-Solomon library by Thomas Gleixner <tglx@linutronix.de>
  *
  * Interface to generic NAND code for M-Systems DiskOnChip devices
- *
- * $Id: diskonchip.c,v 1.55 2005/11/07 11:14:30 gleixner Exp $
  */
 
 #include <linux/kernel.h>
@@ -54,8 +52,6 @@ static unsigned long __initdata doc_locations[] = {
 	0xe0000, 0xe2000, 0xe4000, 0xe6000,
 	0xe8000, 0xea000, 0xec000, 0xee000,
 #endif /*  CONFIG_MTD_DOCPROBE_HIGH */
-#elif defined(__PPC__)
-	0xe4000000,
 #else
 #warning Unknown architecture for DiskOnChip. No default probe locations defined
 #endif
@@ -1129,9 +1125,9 @@ static inline int __init nftl_partscan(struct mtd_info *mtd, struct mtd_partitio
 		goto out;
 	mh = (struct NFTLMediaHeader *)buf;
 
-	mh->NumEraseUnits = le16_to_cpu(mh->NumEraseUnits);
-	mh->FirstPhysicalEUN = le16_to_cpu(mh->FirstPhysicalEUN);
-	mh->FormattedSize = le32_to_cpu(mh->FormattedSize);
+	le16_to_cpus(&mh->NumEraseUnits);
+	le16_to_cpus(&mh->FirstPhysicalEUN);
+	le32_to_cpus(&mh->FormattedSize);
 
 	printk(KERN_INFO "    DataOrgID        = %s\n"
 			 "    NumEraseUnits    = %d\n"
@@ -1239,12 +1235,12 @@ static inline int __init inftl_partscan(struct mtd_info *mtd, struct mtd_partiti
 	doc->mh1_page = doc->mh0_page + (4096 >> this->page_shift);
 	mh = (struct INFTLMediaHeader *)buf;
 
-	mh->NoOfBootImageBlocks = le32_to_cpu(mh->NoOfBootImageBlocks);
-	mh->NoOfBinaryPartitions = le32_to_cpu(mh->NoOfBinaryPartitions);
-	mh->NoOfBDTLPartitions = le32_to_cpu(mh->NoOfBDTLPartitions);
-	mh->BlockMultiplierBits = le32_to_cpu(mh->BlockMultiplierBits);
-	mh->FormatFlags = le32_to_cpu(mh->FormatFlags);
-	mh->PercentUsed = le32_to_cpu(mh->PercentUsed);
+	le32_to_cpus(&mh->NoOfBootImageBlocks);
+	le32_to_cpus(&mh->NoOfBinaryPartitions);
+	le32_to_cpus(&mh->NoOfBDTLPartitions);
+	le32_to_cpus(&mh->BlockMultiplierBits);
+	le32_to_cpus(&mh->FormatFlags);
+	le32_to_cpus(&mh->PercentUsed);
 
 	printk(KERN_INFO "    bootRecordID          = %s\n"
 			 "    NoOfBootImageBlocks   = %d\n"
@@ -1281,12 +1277,12 @@ static inline int __init inftl_partscan(struct mtd_info *mtd, struct mtd_partiti
 	/* Scan the partitions */
 	for (i = 0; (i < 4); i++) {
 		ip = &(mh->Partitions[i]);
-		ip->virtualUnits = le32_to_cpu(ip->virtualUnits);
-		ip->firstUnit = le32_to_cpu(ip->firstUnit);
-		ip->lastUnit = le32_to_cpu(ip->lastUnit);
-		ip->flags = le32_to_cpu(ip->flags);
-		ip->spareUnits = le32_to_cpu(ip->spareUnits);
-		ip->Reserved0 = le32_to_cpu(ip->Reserved0);
+		le32_to_cpus(&ip->virtualUnits);
+		le32_to_cpus(&ip->firstUnit);
+		le32_to_cpus(&ip->lastUnit);
+		le32_to_cpus(&ip->flags);
+		le32_to_cpus(&ip->spareUnits);
+		le32_to_cpus(&ip->Reserved0);
 
 		printk(KERN_INFO	"    PARTITION[%d] ->\n"
 			"        virtualUnits    = %d\n"
diff --git a/drivers/mtd/nand/edb7312.c b/drivers/mtd/nand/edb7312.c
index ba67bbec20d3..86366bfba9f8 100644
--- a/drivers/mtd/nand/edb7312.c
+++ b/drivers/mtd/nand/edb7312.c
@@ -6,8 +6,6 @@
  *  Derived from drivers/mtd/nand/autcpu12.c
  *       Copyright (c) 2001 Thomas Gleixner (gleixner@autronix.de)
  *
- * $Id: edb7312.c,v 1.12 2005/11/07 11:14:30 gleixner Exp $
- *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
@@ -25,7 +23,7 @@
 #include <linux/mtd/nand.h>
 #include <linux/mtd/partitions.h>
 #include <asm/io.h>
-#include <asm/arch/hardware.h>	/* for CLPS7111_VIRT_BASE */
+#include <mach/hardware.h>	/* for CLPS7111_VIRT_BASE */
 #include <asm/sizes.h>
 #include <asm/hardware/clps7111.h>
 
diff --git a/drivers/mtd/nand/excite_nandflash.c b/drivers/mtd/nand/excite_nandflash.c
index bed87290decc..ced14b5294d5 100644
--- a/drivers/mtd/nand/excite_nandflash.c
+++ b/drivers/mtd/nand/excite_nandflash.c
@@ -209,7 +209,7 @@ static int __init excite_nand_probe(struct device *dev)
 	if (likely(!scan_res)) {
 		DEBUG(MTD_DEBUG_LEVEL2, "%s: register partitions\n", module_id);
 		add_mtd_partitions(&drvdata->board_mtd, partition_info,
-				   sizeof partition_info / sizeof partition_info[0]);
+				   ARRAY_SIZE(partition_info));
 	} else {
 		iounmap(drvdata->regs);
 		kfree(drvdata);
diff --git a/drivers/mtd/nand/fsl_elbc_nand.c b/drivers/mtd/nand/fsl_elbc_nand.c
index 4b69aacdf5ca..98ad3cefcaf4 100644
--- a/drivers/mtd/nand/fsl_elbc_nand.c
+++ b/drivers/mtd/nand/fsl_elbc_nand.c
@@ -89,7 +89,6 @@ static struct nand_ecclayout fsl_elbc_oob_sp_eccm0 = {
 	.eccbytes = 3,
 	.eccpos = {6, 7, 8},
 	.oobfree = { {0, 5}, {9, 7} },
-	.oobavail = 12,
 };
 
 /* Small Page FLASH with FMR[ECCM] = 1 */
@@ -97,7 +96,6 @@ static struct nand_ecclayout fsl_elbc_oob_sp_eccm1 = {
 	.eccbytes = 3,
 	.eccpos = {8, 9, 10},
 	.oobfree = { {0, 5}, {6, 2}, {11, 5} },
-	.oobavail = 12,
 };
 
 /* Large Page FLASH with FMR[ECCM] = 0 */
@@ -105,7 +103,6 @@ static struct nand_ecclayout fsl_elbc_oob_lp_eccm0 = {
 	.eccbytes = 12,
 	.eccpos = {6, 7, 8, 22, 23, 24, 38, 39, 40, 54, 55, 56},
 	.oobfree = { {1, 5}, {9, 13}, {25, 13}, {41, 13}, {57, 7} },
-	.oobavail = 48,
 };
 
 /* Large Page FLASH with FMR[ECCM] = 1 */
@@ -113,7 +110,48 @@ static struct nand_ecclayout fsl_elbc_oob_lp_eccm1 = {
 	.eccbytes = 12,
 	.eccpos = {8, 9, 10, 24, 25, 26, 40, 41, 42, 56, 57, 58},
 	.oobfree = { {1, 7}, {11, 13}, {27, 13}, {43, 13}, {59, 5} },
-	.oobavail = 48,
+};
+
+/*
+ * fsl_elbc_oob_lp_eccm* specify that LP NAND's OOB free area starts at offset
+ * 1, so we have to adjust bad block pattern. This pattern should be used for
+ * x8 chips only. So far hardware does not support x16 chips anyway.
+ */
+static u8 scan_ff_pattern[] = { 0xff, };
+
+static struct nand_bbt_descr largepage_memorybased = {
+	.options = 0,
+	.offs = 0,
+	.len = 1,
+	.pattern = scan_ff_pattern,
+};
+
+/*
+ * ELBC may use HW ECC, so that OOB offsets, that NAND core uses for bbt,
+ * interfere with ECC positions, that's why we implement our own descriptors.
+ * OOB {11, 5}, works for both SP and LP chips, with ECCM = 1 and ECCM = 0.
+ */
+static u8 bbt_pattern[] = {'B', 'b', 't', '0' };
+static u8 mirror_pattern[] = {'1', 't', 'b', 'B' };
+
+static struct nand_bbt_descr bbt_main_descr = {
+	.options = NAND_BBT_LASTBLOCK | NAND_BBT_CREATE | NAND_BBT_WRITE |
+		   NAND_BBT_2BIT | NAND_BBT_VERSION,
+	.offs =	11,
+	.len = 4,
+	.veroffs = 15,
+	.maxblocks = 4,
+	.pattern = bbt_pattern,
+};
+
+static struct nand_bbt_descr bbt_mirror_descr = {
+	.options = NAND_BBT_LASTBLOCK | NAND_BBT_CREATE | NAND_BBT_WRITE |
+		   NAND_BBT_2BIT | NAND_BBT_VERSION,
+	.offs =	11,
+	.len = 4,
+	.veroffs = 15,
+	.maxblocks = 4,
+	.pattern = mirror_pattern,
 };
 
 /*=================================*/
@@ -687,8 +725,7 @@ static int fsl_elbc_chip_init_tail(struct mtd_info *mtd)
 			chip->ecc.layout = (priv->fmr & FMR_ECCM) ?
 			                   &fsl_elbc_oob_lp_eccm1 :
 			                   &fsl_elbc_oob_lp_eccm0;
-			mtd->ecclayout = chip->ecc.layout;
-			mtd->oobavail = chip->ecc.layout->oobavail;
+			chip->badblock_pattern = &largepage_memorybased;
 		}
 	} else {
 		dev_err(ctrl->dev,
@@ -752,8 +789,12 @@ static int fsl_elbc_chip_init(struct fsl_elbc_mtd *priv)
 	chip->cmdfunc = fsl_elbc_cmdfunc;
 	chip->waitfunc = fsl_elbc_wait;
 
+	chip->bbt_td = &bbt_main_descr;
+	chip->bbt_md = &bbt_mirror_descr;
+
 	/* set up nand options */
-	chip->options = NAND_NO_READRDY | NAND_NO_AUTOINCR;
+	chip->options = NAND_NO_READRDY | NAND_NO_AUTOINCR |
+			NAND_USE_FLASH_BBT;
 
 	chip->controller = &ctrl->controller;
 	chip->priv = priv;
@@ -795,8 +836,8 @@ static int fsl_elbc_chip_remove(struct fsl_elbc_mtd *priv)
 	return 0;
 }
 
-static int fsl_elbc_chip_probe(struct fsl_elbc_ctrl *ctrl,
-                               struct device_node *node)
+static int __devinit fsl_elbc_chip_probe(struct fsl_elbc_ctrl *ctrl,
+					 struct device_node *node)
 {
 	struct fsl_lbc_regs __iomem *lbc = ctrl->regs;
 	struct fsl_elbc_mtd *priv;
@@ -846,7 +887,7 @@ static int fsl_elbc_chip_probe(struct fsl_elbc_ctrl *ctrl,
 		goto err;
 	}
 
-	priv->mtd.name = kasprintf(GFP_KERNEL, "%x.flash", res.start);
+	priv->mtd.name = kasprintf(GFP_KERNEL, "%x.flash", (unsigned)res.start);
 	if (!priv->mtd.name) {
 		ret = -ENOMEM;
 		goto err;
@@ -917,7 +958,7 @@ static int __devinit fsl_elbc_ctrl_init(struct fsl_elbc_ctrl *ctrl)
 	return 0;
 }
 
-static int __devexit fsl_elbc_ctrl_remove(struct of_device *ofdev)
+static int fsl_elbc_ctrl_remove(struct of_device *ofdev)
 {
 	struct fsl_elbc_ctrl *ctrl = dev_get_drvdata(&ofdev->dev);
 	int i;
@@ -1041,7 +1082,7 @@ static struct of_platform_driver fsl_elbc_ctrl_driver = {
 	},
 	.match_table = fsl_elbc_match,
 	.probe = fsl_elbc_ctrl_probe,
-	.remove = __devexit_p(fsl_elbc_ctrl_remove),
+	.remove = fsl_elbc_ctrl_remove,
 };
 
 static int __init fsl_elbc_init(void)
diff --git a/drivers/mtd/nand/h1910.c b/drivers/mtd/nand/h1910.c
index 2d585d2d090c..f8ce79b446ed 100644
--- a/drivers/mtd/nand/h1910.c
+++ b/drivers/mtd/nand/h1910.c
@@ -7,8 +7,6 @@
  *       Copyright (C) 2002 Marius Gröger (mag@sysgo.de)
  *       Copyright (c) 2001 Thomas Gleixner (gleixner@autronix.de)
  *
- * $Id: h1910.c,v 1.6 2005/11/07 11:14:30 gleixner Exp $
- *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
@@ -26,10 +24,10 @@
 #include <linux/mtd/nand.h>
 #include <linux/mtd/partitions.h>
 #include <asm/io.h>
-#include <asm/arch/hardware.h>	/* for CLPS7111_VIRT_BASE */
+#include <mach/hardware.h>	/* for CLPS7111_VIRT_BASE */
 #include <asm/sizes.h>
-#include <asm/arch/h1900-gpio.h>
-#include <asm/arch/ipaq.h>
+#include <mach/h1900-gpio.h>
+#include <mach/ipaq.h>
 
 /*
  * MTD structure for EDB7312 board
diff --git a/drivers/mtd/nand/nand_base.c b/drivers/mtd/nand/nand_base.c
index ba1bdf787323..d1129bae6c27 100644
--- a/drivers/mtd/nand/nand_base.c
+++ b/drivers/mtd/nand/nand_base.c
@@ -798,6 +798,87 @@ static int nand_read_page_swecc(struct mtd_info *mtd, struct nand_chip *chip,
 }
 
 /**
+ * nand_read_subpage - [REPLACABLE] software ecc based sub-page read function
+ * @mtd:	mtd info structure
+ * @chip:	nand chip info structure
+ * @dataofs	offset of requested data within the page
+ * @readlen	data length
+ * @buf:	buffer to store read data
+ */
+static int nand_read_subpage(struct mtd_info *mtd, struct nand_chip *chip, uint32_t data_offs, uint32_t readlen, uint8_t *bufpoi)
+{
+	int start_step, end_step, num_steps;
+	uint32_t *eccpos = chip->ecc.layout->eccpos;
+	uint8_t *p;
+	int data_col_addr, i, gaps = 0;
+	int datafrag_len, eccfrag_len, aligned_len, aligned_pos;
+	int busw = (chip->options & NAND_BUSWIDTH_16) ? 2 : 1;
+
+	/* Column address wihin the page aligned to ECC size (256bytes). */
+	start_step = data_offs / chip->ecc.size;
+	end_step = (data_offs + readlen - 1) / chip->ecc.size;
+	num_steps = end_step - start_step + 1;
+
+	/* Data size aligned to ECC ecc.size*/
+	datafrag_len = num_steps * chip->ecc.size;
+	eccfrag_len = num_steps * chip->ecc.bytes;
+
+	data_col_addr = start_step * chip->ecc.size;
+	/* If we read not a page aligned data */
+	if (data_col_addr != 0)
+		chip->cmdfunc(mtd, NAND_CMD_RNDOUT, data_col_addr, -1);
+
+	p = bufpoi + data_col_addr;
+	chip->read_buf(mtd, p, datafrag_len);
+
+	/* Calculate  ECC */
+	for (i = 0; i < eccfrag_len ; i += chip->ecc.bytes, p += chip->ecc.size)
+		chip->ecc.calculate(mtd, p, &chip->buffers->ecccalc[i]);
+
+	/* The performance is faster if to position offsets
+	   according to ecc.pos. Let make sure here that
+	   there are no gaps in ecc positions */
+	for (i = 0; i < eccfrag_len - 1; i++) {
+		if (eccpos[i + start_step * chip->ecc.bytes] + 1 !=
+			eccpos[i + start_step * chip->ecc.bytes + 1]) {
+			gaps = 1;
+			break;
+		}
+	}
+	if (gaps) {
+		chip->cmdfunc(mtd, NAND_CMD_RNDOUT, mtd->writesize, -1);
+		chip->read_buf(mtd, chip->oob_poi, mtd->oobsize);
+	} else {
+		/* send the command to read the particular ecc bytes */
+		/* take care about buswidth alignment in read_buf */
+		aligned_pos = eccpos[start_step * chip->ecc.bytes] & ~(busw - 1);
+		aligned_len = eccfrag_len;
+		if (eccpos[start_step * chip->ecc.bytes] & (busw - 1))
+			aligned_len++;
+		if (eccpos[(start_step + num_steps) * chip->ecc.bytes] & (busw - 1))
+			aligned_len++;
+
+		chip->cmdfunc(mtd, NAND_CMD_RNDOUT, mtd->writesize + aligned_pos, -1);
+		chip->read_buf(mtd, &chip->oob_poi[aligned_pos], aligned_len);
+	}
+
+	for (i = 0; i < eccfrag_len; i++)
+		chip->buffers->ecccode[i] = chip->oob_poi[eccpos[i + start_step * chip->ecc.bytes]];
+
+	p = bufpoi + data_col_addr;
+	for (i = 0; i < eccfrag_len ; i += chip->ecc.bytes, p += chip->ecc.size) {
+		int stat;
+
+		stat = chip->ecc.correct(mtd, p, &chip->buffers->ecccode[i], &chip->buffers->ecccalc[i]);
+		if (stat == -1)
+			mtd->ecc_stats.failed++;
+		else
+			mtd->ecc_stats.corrected += stat;
+	}
+	return 0;
+}
+
+/**
  * nand_read_page_hwecc - [REPLACABLE] hardware ecc based page read function
  * @mtd:	mtd info structure
  * @chip:	nand chip info structure
@@ -994,6 +1075,8 @@ static int nand_do_read_ops(struct mtd_info *mtd, loff_t from,
 			/* Now read the page into the buffer */
 			if (unlikely(ops->mode == MTD_OOB_RAW))
 				ret = chip->ecc.read_page_raw(mtd, chip, bufpoi);
+			else if (!aligned && NAND_SUBPAGE_READ(chip) && !oob)
+				ret = chip->ecc.read_subpage(mtd, chip, col, bytes, bufpoi);
 			else
 				ret = chip->ecc.read_page(mtd, chip, bufpoi);
 			if (ret < 0)
@@ -1001,7 +1084,8 @@ static int nand_do_read_ops(struct mtd_info *mtd, loff_t from,
 
 			/* Transfer not aligned data */
 			if (!aligned) {
-				chip->pagebuf = realpage;
+				if (!NAND_SUBPAGE_READ(chip) && !oob)
+					chip->pagebuf = realpage;
 				memcpy(buf, chip->buffers->databuf + col, bytes);
 			}
 
@@ -2521,6 +2605,7 @@ int nand_scan_tail(struct mtd_info *mtd)
 		chip->ecc.calculate = nand_calculate_ecc;
 		chip->ecc.correct = nand_correct_data;
 		chip->ecc.read_page = nand_read_page_swecc;
+		chip->ecc.read_subpage = nand_read_subpage;
 		chip->ecc.write_page = nand_write_page_swecc;
 		chip->ecc.read_oob = nand_read_oob_std;
 		chip->ecc.write_oob = nand_write_oob_std;
diff --git a/drivers/mtd/nand/nand_bbt.c b/drivers/mtd/nand/nand_bbt.c
index 5e121ceaa598..0b1c48595f12 100644
--- a/drivers/mtd/nand/nand_bbt.c
+++ b/drivers/mtd/nand/nand_bbt.c
@@ -6,8 +6,6 @@
  *
  *  Copyright (C) 2004 Thomas Gleixner (tglx@linutronix.de)
  *
- * $Id: nand_bbt.c,v 1.36 2005/11/07 11:14:30 gleixner Exp $
- *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
diff --git a/drivers/mtd/nand/nand_ecc.c b/drivers/mtd/nand/nand_ecc.c
index 9003a135e050..918a806a8471 100644
--- a/drivers/mtd/nand/nand_ecc.c
+++ b/drivers/mtd/nand/nand_ecc.c
@@ -9,8 +9,6 @@
  *
  * Copyright (C) 2006 Thomas Gleixner <tglx@linutronix.de>
  *
- * $Id: nand_ecc.c,v 1.15 2005/11/07 11:14:30 gleixner Exp $
- *
  * This file is free software; you can redistribute it and/or modify it
  * under the terms of the GNU General Public License as published by the
  * Free Software Foundation; either version 2 or (at your option) any
diff --git a/drivers/mtd/nand/nand_ids.c b/drivers/mtd/nand/nand_ids.c
index a3e3ab0185d5..69ee2c90eb0b 100644
--- a/drivers/mtd/nand/nand_ids.c
+++ b/drivers/mtd/nand/nand_ids.c
@@ -3,8 +3,6 @@
  *
  *  Copyright (C) 2002 Thomas Gleixner (tglx@linutronix.de)
  *
- * $Id: nand_ids.c,v 1.16 2005/11/07 11:14:31 gleixner Exp $
- *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
diff --git a/drivers/mtd/nand/nandsim.c b/drivers/mtd/nand/nandsim.c
index bb885d1fcab5..556e8131ecdc 100644
--- a/drivers/mtd/nand/nandsim.c
+++ b/drivers/mtd/nand/nandsim.c
@@ -21,8 +21,6 @@
  * You should have received a copy of the GNU General Public License
  * along with this program; if not, write to the Free Software
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA
- *
- * $Id: nandsim.c,v 1.8 2005/03/19 15:33:56 dedekind Exp $
  */
 
 #include <linux/init.h>
@@ -30,6 +28,7 @@
 #include <linux/module.h>
 #include <linux/moduleparam.h>
 #include <linux/vmalloc.h>
+#include <asm/div64.h>
 #include <linux/slab.h>
 #include <linux/errno.h>
 #include <linux/string.h>
@@ -39,6 +38,7 @@
 #include <linux/delay.h>
 #include <linux/list.h>
 #include <linux/random.h>
+#include <asm/div64.h>
 
 /* Default simulator parameters values */
 #if !defined(CONFIG_NANDSIM_FIRST_ID_BYTE)  || \
@@ -208,13 +208,16 @@ MODULE_PARM_DESC(overridesize,   "Specifies the NAND Flash size overriding the I
 #define STATE_CMD_READID       0x0000000A /* read ID */
 #define STATE_CMD_ERASE2       0x0000000B /* sector erase second command */
 #define STATE_CMD_RESET        0x0000000C /* reset */
+#define STATE_CMD_RNDOUT       0x0000000D /* random output command */
+#define STATE_CMD_RNDOUTSTART  0x0000000E /* random output start command */
 #define STATE_CMD_MASK         0x0000000F /* command states mask */
 
 /* After an address is input, the simulator goes to one of these states */
 #define STATE_ADDR_PAGE        0x00000010 /* full (row, column) address is accepted */
 #define STATE_ADDR_SEC         0x00000020 /* sector address was accepted */
-#define STATE_ADDR_ZERO        0x00000030 /* one byte zero address was accepted */
-#define STATE_ADDR_MASK        0x00000030 /* address states mask */
+#define STATE_ADDR_COLUMN      0x00000030 /* column address was accepted */
+#define STATE_ADDR_ZERO        0x00000040 /* one byte zero address was accepted */
+#define STATE_ADDR_MASK        0x00000070 /* address states mask */
 
 /* Durind data input/output the simulator is in these states */
 #define STATE_DATAIN           0x00000100 /* waiting for data input */
@@ -241,7 +244,7 @@ MODULE_PARM_DESC(overridesize,   "Specifies the NAND Flash size overriding the I
 #define ACTION_OOBOFF    0x00600000 /* add to address OOB offset */
 #define ACTION_MASK      0x00700000 /* action mask */
 
-#define NS_OPER_NUM      12 /* Number of operations supported by the simulator */
+#define NS_OPER_NUM      13 /* Number of operations supported by the simulator */
 #define NS_OPER_STATES   6  /* Maximum number of states in operation */
 
 #define OPT_ANY          0xFFFFFFFF /* any chip supports this operation */
@@ -298,11 +301,11 @@ struct nandsim {
 
 	/* NAND flash "geometry" */
 	struct nandsin_geometry {
-		uint32_t totsz;     /* total flash size, bytes */
+		uint64_t totsz;     /* total flash size, bytes */
 		uint32_t secsz;     /* flash sector (erase block) size, bytes */
 		uint pgsz;          /* NAND flash page size, bytes */
 		uint oobsz;         /* page OOB area size, bytes */
-		uint32_t totszoob;  /* total flash size including OOB, bytes */
+		uint64_t totszoob;  /* total flash size including OOB, bytes */
 		uint pgszoob;       /* page size including OOB , bytes*/
 		uint secszoob;      /* sector size including OOB, bytes */
 		uint pgnum;         /* total number of pages */
@@ -374,7 +377,10 @@ static struct nandsim_operations {
 	{OPT_ANY, {STATE_CMD_READID, STATE_ADDR_ZERO, STATE_DATAOUT_ID, STATE_READY}},
 	/* Large page devices read page */
 	{OPT_LARGEPAGE, {STATE_CMD_READ0, STATE_ADDR_PAGE, STATE_CMD_READSTART | ACTION_CPY,
-			       STATE_DATAOUT, STATE_READY}}
+			       STATE_DATAOUT, STATE_READY}},
+	/* Large page devices random page read */
+	{OPT_LARGEPAGE, {STATE_CMD_RNDOUT, STATE_ADDR_COLUMN, STATE_CMD_RNDOUTSTART | ACTION_CPY,
+			       STATE_DATAOUT, STATE_READY}},
 };
 
 struct weak_block {
@@ -459,6 +465,12 @@ static char *get_partition_name(int i)
 	return kstrdup(buf, GFP_KERNEL);
 }
 
+static u_int64_t divide(u_int64_t n, u_int32_t d)
+{
+	do_div(n, d);
+	return n;
+}
+
 /*
  * Initialize the nandsim structure.
  *
@@ -469,8 +481,8 @@ static int init_nandsim(struct mtd_info *mtd)
 	struct nand_chip *chip = (struct nand_chip *)mtd->priv;
 	struct nandsim   *ns   = (struct nandsim *)(chip->priv);
 	int i, ret = 0;
-	u_int32_t remains;
-	u_int32_t next_offset;
+	u_int64_t remains;
+	u_int64_t next_offset;
 
 	if (NS_IS_INITIALIZED(ns)) {
 		NS_ERR("init_nandsim: nandsim is already initialized\n");
@@ -487,8 +499,8 @@ static int init_nandsim(struct mtd_info *mtd)
 	ns->geom.oobsz    = mtd->oobsize;
 	ns->geom.secsz    = mtd->erasesize;
 	ns->geom.pgszoob  = ns->geom.pgsz + ns->geom.oobsz;
-	ns->geom.pgnum    = ns->geom.totsz / ns->geom.pgsz;
-	ns->geom.totszoob = ns->geom.totsz + ns->geom.pgnum * ns->geom.oobsz;
+	ns->geom.pgnum    = divide(ns->geom.totsz, ns->geom.pgsz);
+	ns->geom.totszoob = ns->geom.totsz + (uint64_t)ns->geom.pgnum * ns->geom.oobsz;
 	ns->geom.secshift = ffs(ns->geom.secsz) - 1;
 	ns->geom.pgshift  = chip->page_shift;
 	ns->geom.oobshift = ffs(ns->geom.oobsz) - 1;
@@ -511,7 +523,7 @@ static int init_nandsim(struct mtd_info *mtd)
 	}
 
 	if (ns->options & OPT_SMALLPAGE) {
-		if (ns->geom.totsz < (32 << 20)) {
+		if (ns->geom.totsz <= (32 << 20)) {
 			ns->geom.pgaddrbytes  = 3;
 			ns->geom.secaddrbytes = 2;
 		} else {
@@ -537,15 +549,16 @@ static int init_nandsim(struct mtd_info *mtd)
 	remains = ns->geom.totsz;
 	next_offset = 0;
 	for (i = 0; i < parts_num; ++i) {
-		unsigned long part = parts[i];
-		if (!part || part > remains / ns->geom.secsz) {
+		u_int64_t part_sz = (u_int64_t)parts[i] * ns->geom.secsz;
+
+		if (!part_sz || part_sz > remains) {
 			NS_ERR("bad partition size.\n");
 			ret = -EINVAL;
 			goto error;
 		}
 		ns->partitions[i].name   = get_partition_name(i);
 		ns->partitions[i].offset = next_offset;
-		ns->partitions[i].size   = part * ns->geom.secsz;
+		ns->partitions[i].size   = part_sz;
 		next_offset += ns->partitions[i].size;
 		remains -= ns->partitions[i].size;
 	}
@@ -573,7 +586,8 @@ static int init_nandsim(struct mtd_info *mtd)
 	if (ns->busw == 16)
 		NS_WARN("16-bit flashes support wasn't tested\n");
 
-	printk("flash size: %u MiB\n",          ns->geom.totsz >> 20);
+	printk("flash size: %llu MiB\n",
+			(unsigned long long)ns->geom.totsz >> 20);
 	printk("page size: %u bytes\n",         ns->geom.pgsz);
 	printk("OOB area size: %u bytes\n",     ns->geom.oobsz);
 	printk("sector size: %u KiB\n",         ns->geom.secsz >> 10);
@@ -582,8 +596,9 @@ static int init_nandsim(struct mtd_info *mtd)
 	printk("bus width: %u\n",               ns->busw);
 	printk("bits in sector size: %u\n",     ns->geom.secshift);
 	printk("bits in page size: %u\n",       ns->geom.pgshift);
-	printk("bits in OOB size: %u\n",        ns->geom.oobshift);
-	printk("flash size with OOB: %u KiB\n", ns->geom.totszoob >> 10);
+	printk("bits in OOB size: %u\n",	ns->geom.oobshift);
+	printk("flash size with OOB: %llu KiB\n",
+			(unsigned long long)ns->geom.totszoob >> 10);
 	printk("page address bytes: %u\n",      ns->geom.pgaddrbytes);
 	printk("sector address bytes: %u\n",    ns->geom.secaddrbytes);
 	printk("options: %#x\n",                ns->options);
@@ -825,7 +840,7 @@ static int setup_wear_reporting(struct mtd_info *mtd)
 
 	if (!rptwear)
 		return 0;
-	wear_eb_count = mtd->size / mtd->erasesize;
+	wear_eb_count = divide(mtd->size, mtd->erasesize);
 	mem = wear_eb_count * sizeof(unsigned long);
 	if (mem / sizeof(unsigned long) != wear_eb_count) {
 		NS_ERR("Too many erase blocks for wear reporting\n");
@@ -931,12 +946,18 @@ static char *get_state_name(uint32_t state)
 			return "STATE_CMD_ERASE2";
 		case STATE_CMD_RESET:
 			return "STATE_CMD_RESET";
+		case STATE_CMD_RNDOUT:
+			return "STATE_CMD_RNDOUT";
+		case STATE_CMD_RNDOUTSTART:
+			return "STATE_CMD_RNDOUTSTART";
 		case STATE_ADDR_PAGE:
 			return "STATE_ADDR_PAGE";
 		case STATE_ADDR_SEC:
 			return "STATE_ADDR_SEC";
 		case STATE_ADDR_ZERO:
 			return "STATE_ADDR_ZERO";
+		case STATE_ADDR_COLUMN:
+			return "STATE_ADDR_COLUMN";
 		case STATE_DATAIN:
 			return "STATE_DATAIN";
 		case STATE_DATAOUT:
@@ -967,6 +988,7 @@ static int check_command(int cmd)
 	switch (cmd) {
 
 	case NAND_CMD_READ0:
+	case NAND_CMD_READ1:
 	case NAND_CMD_READSTART:
 	case NAND_CMD_PAGEPROG:
 	case NAND_CMD_READOOB:
@@ -976,7 +998,8 @@ static int check_command(int cmd)
 	case NAND_CMD_READID:
 	case NAND_CMD_ERASE2:
 	case NAND_CMD_RESET:
-	case NAND_CMD_READ1:
+	case NAND_CMD_RNDOUT:
+	case NAND_CMD_RNDOUTSTART:
 		return 0;
 
 	case NAND_CMD_STATUS_MULTI:
@@ -1015,6 +1038,10 @@ static uint32_t get_state_by_command(unsigned command)
 			return STATE_CMD_ERASE2;
 		case NAND_CMD_RESET:
 			return STATE_CMD_RESET;
+		case NAND_CMD_RNDOUT:
+			return STATE_CMD_RNDOUT;
+		case NAND_CMD_RNDOUTSTART:
+			return STATE_CMD_RNDOUTSTART;
 	}
 
 	NS_ERR("get_state_by_command: unknown command, BUG\n");
@@ -1576,6 +1603,11 @@ static void switch_state(struct nandsim *ns)
 				ns->regs.num = 1;
 				break;
 
+			case STATE_ADDR_COLUMN:
+				/* Column address is always 2 bytes */
+				ns->regs.num = ns->geom.pgaddrbytes - ns->geom.secaddrbytes;
+				break;
+
 			default:
 				NS_ERR("switch_state: BUG! unknown address state\n");
 		}
@@ -1687,15 +1719,21 @@ static void ns_nand_write_byte(struct mtd_info *mtd, u_char byte)
 			return;
 		}
 
-		/*
-		 * Chip might still be in STATE_DATAOUT
-		 * (if OPT_AUTOINCR feature is supported), STATE_DATAOUT_STATUS or
-		 * STATE_DATAOUT_STATUS_M state. If so, switch state.
-		 */
+		/* Check that the command byte is correct */
+		if (check_command(byte)) {
+			NS_ERR("write_byte: unknown command %#x\n", (uint)byte);
+			return;
+		}
+
 		if (NS_STATE(ns->state) == STATE_DATAOUT_STATUS
 			|| NS_STATE(ns->state) == STATE_DATAOUT_STATUS_M
-			|| ((ns->options & OPT_AUTOINCR) && NS_STATE(ns->state) == STATE_DATAOUT))
+			|| NS_STATE(ns->state) == STATE_DATAOUT) {
+			int row = ns->regs.row;
+
 			switch_state(ns);
+			if (byte == NAND_CMD_RNDOUT)
+				ns->regs.row = row;
+		}
 
 		/* Check if chip is expecting command */
 		if (NS_STATE(ns->nxstate) != STATE_UNKNOWN && !(ns->nxstate & STATE_CMD_MASK)) {
@@ -1709,12 +1747,6 @@ static void ns_nand_write_byte(struct mtd_info *mtd, u_char byte)
 			switch_to_ready_state(ns, NS_STATUS_FAILED(ns));
 		}
 
-		/* Check that the command byte is correct */
-		if (check_command(byte)) {
-			NS_ERR("write_byte: unknown command %#x\n", (uint)byte);
-			return;
-		}
-
 		NS_DBG("command byte corresponding to %s state accepted\n",
 			get_state_name(get_state_by_command(byte)));
 		ns->regs.command = byte;
@@ -2013,7 +2045,7 @@ static int __init ns_init_module(void)
 	}
 
 	if (overridesize) {
-		u_int32_t new_size = nsmtd->erasesize << overridesize;
+		u_int64_t new_size = (u_int64_t)nsmtd->erasesize << overridesize;
 		if (new_size >> overridesize != nsmtd->erasesize) {
 			NS_ERR("overridesize is too big\n");
 			goto err_exit;
@@ -2021,7 +2053,8 @@ static int __init ns_init_module(void)
 		/* N.B. This relies on nand_scan not doing anything with the size before we change it */
 		nsmtd->size = new_size;
 		chip->chipsize = new_size;
-		chip->chip_shift = ffs(new_size) - 1;
+		chip->chip_shift = ffs(nsmtd->erasesize) + overridesize - 1;
+		chip->pagemask = (chip->chipsize >> chip->page_shift) - 1;
 	}
 
 	if ((retval = setup_wear_reporting(nsmtd)) != 0)
diff --git a/drivers/mtd/nand/orion_nand.c b/drivers/mtd/nand/orion_nand.c
index ee2ac3948cd8..917cf8d3ae95 100644
--- a/drivers/mtd/nand/orion_nand.c
+++ b/drivers/mtd/nand/orion_nand.c
@@ -18,8 +18,8 @@
 #include <linux/mtd/partitions.h>
 #include <asm/io.h>
 #include <asm/sizes.h>
-#include <asm/arch/hardware.h>
-#include <asm/plat-orion/orion_nand.h>
+#include <mach/hardware.h>
+#include <plat/orion_nand.h>
 
 #ifdef CONFIG_MTD_CMDLINE_PARTS
 static const char *part_probes[] = { "cmdlinepart", NULL };
diff --git a/drivers/mtd/nand/ppchameleonevb.c b/drivers/mtd/nand/ppchameleonevb.c
index 082073acf20f..cc8658431851 100644
--- a/drivers/mtd/nand/ppchameleonevb.c
+++ b/drivers/mtd/nand/ppchameleonevb.c
@@ -6,8 +6,6 @@
  *  Derived from drivers/mtd/nand/edb7312.c
  *
  *
- * $Id: ppchameleonevb.c,v 1.7 2005/11/07 11:14:31 gleixner Exp $
- *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
diff --git a/drivers/mtd/nand/pxa3xx_nand.c b/drivers/mtd/nand/pxa3xx_nand.c
index fe2bc7e42119..a64ad15b8fdd 100644
--- a/drivers/mtd/nand/pxa3xx_nand.c
+++ b/drivers/mtd/nand/pxa3xx_nand.c
@@ -22,8 +22,8 @@
 #include <linux/irq.h>
 #include <asm/dma.h>
 
-#include <asm/arch/pxa-regs.h>
-#include <asm/arch/pxa3xx_nand.h>
+#include <mach/pxa-regs.h>
+#include <mach/pxa3xx_nand.h>
 
 #define	CHIP_DELAY_TIMEOUT	(2 * HZ/10)
 
diff --git a/drivers/mtd/nand/rtc_from4.c b/drivers/mtd/nand/rtc_from4.c
index 26f88215bc47..a033c4cd8e16 100644
--- a/drivers/mtd/nand/rtc_from4.c
+++ b/drivers/mtd/nand/rtc_from4.c
@@ -6,8 +6,6 @@
  *  Derived from drivers/mtd/nand/spia.c
  *       Copyright (C) 2000 Steven J. Hill (sjhill@realitydiluted.com)
  *
- * $Id: rtc_from4.c,v 1.10 2005/11/07 11:14:31 gleixner Exp $
- *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
diff --git a/drivers/mtd/nand/s3c2410.c b/drivers/mtd/nand/s3c2410.c
index b34a460ab679..556139ed1fdf 100644
--- a/drivers/mtd/nand/s3c2410.c
+++ b/drivers/mtd/nand/s3c2410.c
@@ -1,26 +1,10 @@
 /* linux/drivers/mtd/nand/s3c2410.c
  *
- * Copyright (c) 2004,2005 Simtec Electronics
- *	http://www.simtec.co.uk/products/SWLINUX/
+ * Copyright © 2004-2008 Simtec Electronics
+ *	http://armlinux.simtec.co.uk/
  *	Ben Dooks <ben@simtec.co.uk>
  *
- * Samsung S3C2410/S3C240 NAND driver
- *
- * Changelog:
- *	21-Sep-2004  BJD  Initial version
- *	23-Sep-2004  BJD  Multiple device support
- *	28-Sep-2004  BJD  Fixed ECC placement for Hardware mode
- *	12-Oct-2004  BJD  Fixed errors in use of platform data
- *	18-Feb-2005  BJD  Fix sparse errors
- *	14-Mar-2005  BJD  Applied tglx's code reduction patch
- *	02-May-2005  BJD  Fixed s3c2440 support
- *	02-May-2005  BJD  Reduced hwcontrol decode
- *	20-Jun-2005  BJD  Updated s3c2440 support, fixed timing bug
- *	08-Jul-2005  BJD  Fix OOPS when no platform data supplied
- *	20-Oct-2005  BJD  Fix timing calculation bug
- *	14-Jan-2006  BJD  Allow clock to be stopped when idle
- *
- * $Id: s3c2410.c,v 1.23 2006/04/01 18:06:29 bjd Exp $
+ * Samsung S3C2410/S3C2440/S3C2412 NAND driver
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -52,6 +36,7 @@
 #include <linux/err.h>
 #include <linux/slab.h>
 #include <linux/clk.h>
+#include <linux/cpufreq.h>
 
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/nand.h>
@@ -120,8 +105,13 @@ struct s3c2410_nand_info {
 	int				sel_bit;
 	int				mtd_count;
 	unsigned long			save_sel;
+	unsigned long			clk_rate;
 
 	enum s3c_cpu_type		cpu_type;
+
+#ifdef CONFIG_CPU_FREQ
+	struct notifier_block	freq_transition;
+#endif
 };
 
 /* conversion functions */
@@ -179,17 +169,18 @@ static int s3c_nand_calc_rate(int wanted, unsigned long clk, int max)
 
 /* controller setup */
 
-static int s3c2410_nand_inithw(struct s3c2410_nand_info *info,
-			       struct platform_device *pdev)
+static int s3c2410_nand_setrate(struct s3c2410_nand_info *info)
 {
-	struct s3c2410_platform_nand *plat = to_nand_plat(pdev);
-	unsigned long clkrate = clk_get_rate(info->clk);
+	struct s3c2410_platform_nand *plat = info->platform;
 	int tacls_max = (info->cpu_type == TYPE_S3C2412) ? 8 : 4;
 	int tacls, twrph0, twrph1;
-	unsigned long cfg = 0;
+	unsigned long clkrate = clk_get_rate(info->clk);
+	unsigned long set, cfg, mask;
+	unsigned long flags;
 
 	/* calculate the timing information for the controller */
 
+	info->clk_rate = clkrate;
 	clkrate /= 1000;	/* turn clock into kHz for ease of use */
 
 	if (plat != NULL) {
@@ -211,28 +202,69 @@ static int s3c2410_nand_inithw(struct s3c2410_nand_info *info,
 	dev_info(info->device, "Tacls=%d, %dns Twrph0=%d %dns, Twrph1=%d %dns\n",
 	       tacls, to_ns(tacls, clkrate), twrph0, to_ns(twrph0, clkrate), twrph1, to_ns(twrph1, clkrate));
 
+	switch (info->cpu_type) {
+	case TYPE_S3C2410:
+		mask = (S3C2410_NFCONF_TACLS(3) |
+			S3C2410_NFCONF_TWRPH0(7) |
+			S3C2410_NFCONF_TWRPH1(7));
+		set = S3C2410_NFCONF_EN;
+		set |= S3C2410_NFCONF_TACLS(tacls - 1);
+		set |= S3C2410_NFCONF_TWRPH0(twrph0 - 1);
+		set |= S3C2410_NFCONF_TWRPH1(twrph1 - 1);
+		break;
+
+	case TYPE_S3C2440:
+	case TYPE_S3C2412:
+		mask = (S3C2410_NFCONF_TACLS(tacls_max - 1) |
+			S3C2410_NFCONF_TWRPH0(7) |
+			S3C2410_NFCONF_TWRPH1(7));
+
+		set = S3C2440_NFCONF_TACLS(tacls - 1);
+		set |= S3C2440_NFCONF_TWRPH0(twrph0 - 1);
+		set |= S3C2440_NFCONF_TWRPH1(twrph1 - 1);
+		break;
+
+	default:
+		/* keep compiler happy */
+		mask = 0;
+		set = 0;
+		BUG();
+	}
+
+	dev_dbg(info->device, "NF_CONF is 0x%lx\n", cfg);
+
+	local_irq_save(flags);
+
+	cfg = readl(info->regs + S3C2410_NFCONF);
+	cfg &= ~mask;
+	cfg |= set;
+	writel(cfg, info->regs + S3C2410_NFCONF);
+
+	local_irq_restore(flags);
+
+	return 0;
+}
+
+static int s3c2410_nand_inithw(struct s3c2410_nand_info *info)
+{
+	int ret;
+
+	ret = s3c2410_nand_setrate(info);
+	if (ret < 0)
+		return ret;
+
  	switch (info->cpu_type) {
  	case TYPE_S3C2410:
-		cfg = S3C2410_NFCONF_EN;
-		cfg |= S3C2410_NFCONF_TACLS(tacls - 1);
-		cfg |= S3C2410_NFCONF_TWRPH0(twrph0 - 1);
-		cfg |= S3C2410_NFCONF_TWRPH1(twrph1 - 1);
+	default:
 		break;
 
  	case TYPE_S3C2440:
  	case TYPE_S3C2412:
-		cfg = S3C2440_NFCONF_TACLS(tacls - 1);
-		cfg |= S3C2440_NFCONF_TWRPH0(twrph0 - 1);
-		cfg |= S3C2440_NFCONF_TWRPH1(twrph1 - 1);
-
 		/* enable the controller and de-assert nFCE */
 
 		writel(S3C2440_NFCONT_ENABLE, info->regs + S3C2440_NFCONT);
 	}
 
-	dev_dbg(info->device, "NF_CONF is 0x%lx\n", cfg);
-
-	writel(cfg, info->regs + S3C2410_NFCONF);
 	return 0;
 }
 
@@ -513,6 +545,52 @@ static void s3c2440_nand_write_buf(struct mtd_info *mtd, const u_char *buf, int
 	writesl(info->regs + S3C2440_NFDATA, buf, len / 4);
 }
 
+/* cpufreq driver support */
+
+#ifdef CONFIG_CPU_FREQ
+
+static int s3c2410_nand_cpufreq_transition(struct notifier_block *nb,
+					  unsigned long val, void *data)
+{
+	struct s3c2410_nand_info *info;
+	unsigned long newclk;
+
+	info = container_of(nb, struct s3c2410_nand_info, freq_transition);
+	newclk = clk_get_rate(info->clk);
+
+	if ((val == CPUFREQ_POSTCHANGE && newclk < info->clk_rate) ||
+	    (val == CPUFREQ_PRECHANGE && newclk > info->clk_rate)) {
+		s3c2410_nand_setrate(info);
+	}
+
+	return 0;
+}
+
+static inline int s3c2410_nand_cpufreq_register(struct s3c2410_nand_info *info)
+{
+	info->freq_transition.notifier_call = s3c2410_nand_cpufreq_transition;
+
+	return cpufreq_register_notifier(&info->freq_transition,
+					 CPUFREQ_TRANSITION_NOTIFIER);
+}
+
+static inline void s3c2410_nand_cpufreq_deregister(struct s3c2410_nand_info *info)
+{
+	cpufreq_unregister_notifier(&info->freq_transition,
+				    CPUFREQ_TRANSITION_NOTIFIER);
+}
+
+#else
+static inline int s3c2410_nand_cpufreq_register(struct s3c2410_nand_info *info)
+{
+	return 0;
+}
+
+static inline void s3c2410_nand_cpufreq_deregister(struct s3c2410_nand_info *info)
+{
+}
+#endif
+
 /* device management functions */
 
 static int s3c2410_nand_remove(struct platform_device *pdev)
@@ -524,9 +602,10 @@ static int s3c2410_nand_remove(struct platform_device *pdev)
 	if (info == NULL)
 		return 0;
 
-	/* first thing we need to do is release all our mtds
-	 * and their partitions, then go through freeing the
-	 * resources used
+	s3c2410_nand_cpufreq_deregister(info);
+
+	/* Release all our mtds  and their partitions, then go through
+	 * freeing the resources used
 	 */
 
 	if (info->mtds != NULL) {
@@ -691,7 +770,8 @@ static void s3c2410_nand_update_chip(struct s3c2410_nand_info *info,
 {
 	struct nand_chip *chip = &nmtd->chip;
 
-	printk("%s: chip %p: %d\n", __func__, chip, chip->page_shift);
+	dev_dbg(info->device, "chip %p => page shift %d\n",
+		chip, chip->page_shift);
 
 	if (hardware_ecc) {
 		/* change the behaviour depending on wether we are using
@@ -784,7 +864,7 @@ static int s3c24xx_nand_probe(struct platform_device *pdev,
 
 	/* initialise the hardware */
 
-	err = s3c2410_nand_inithw(info, pdev);
+	err = s3c2410_nand_inithw(info);
 	if (err != 0)
 		goto exit_error;
 
@@ -827,6 +907,12 @@ static int s3c24xx_nand_probe(struct platform_device *pdev,
 			sets++;
 	}
 
+	err = s3c2410_nand_cpufreq_register(info);
+	if (err < 0) {
+		dev_err(&pdev->dev, "failed to init cpufreq support\n");
+		goto exit_error;
+	}
+
 	if (allow_clk_stop(info)) {
 		dev_info(&pdev->dev, "clock idle support enabled\n");
 		clk_disable(info->clk);
@@ -874,7 +960,7 @@ static int s3c24xx_nand_resume(struct platform_device *dev)
 
 	if (info) {
 		clk_enable(info->clk);
-		s3c2410_nand_inithw(info, dev);
+		s3c2410_nand_inithw(info);
 
 		/* Restore the state of the nFCE line. */
 
diff --git a/drivers/mtd/nand/sharpsl.c b/drivers/mtd/nand/sharpsl.c
index 033f8800b1e6..30a518e211bd 100644
--- a/drivers/mtd/nand/sharpsl.c
+++ b/drivers/mtd/nand/sharpsl.c
@@ -3,8 +3,6 @@
  *
  *  Copyright (C) 2004 Richard Purdie
  *
- *  $Id: sharpsl.c,v 1.7 2005/11/07 11:14:31 gleixner Exp $
- *
  *  Based on Sharp's NAND driver sharp_sl.c
  *
  * This program is free software; you can redistribute it and/or modify
@@ -23,7 +21,7 @@
 #include <linux/mtd/partitions.h>
 #include <linux/interrupt.h>
 #include <asm/io.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/mach-types.h>
 
 static void __iomem *sharpsl_io_base;
diff --git a/drivers/mtd/nand/spia.c b/drivers/mtd/nand/spia.c
index 1f6d429b1583..0cc6d0acb8fe 100644
--- a/drivers/mtd/nand/spia.c
+++ b/drivers/mtd/nand/spia.c
@@ -8,8 +8,6 @@
  *			to controllines	(due to change in nand.c)
  *			page_cache added
  *
- * $Id: spia.c,v 1.25 2005/11/07 11:14:31 gleixner Exp $
- *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
diff --git a/drivers/mtd/nand/tmio_nand.c b/drivers/mtd/nand/tmio_nand.c
new file mode 100644
index 000000000000..cbab654b03c8
--- /dev/null
+++ b/drivers/mtd/nand/tmio_nand.c
@@ -0,0 +1,556 @@
+/*
+ * Toshiba TMIO NAND flash controller driver
+ *
+ * Slightly murky pre-git history of the driver:
+ *
+ * Copyright (c) Ian Molton 2004, 2005, 2008
+ *    Original work, independant of sharps code. Included hardware ECC support.
+ *    Hard ECC did not work for writes in the early revisions.
+ * Copyright (c) Dirk Opfer 2005.
+ *    Modifications developed from sharps code but
+ *    NOT containing any, ported onto Ians base.
+ * Copyright (c) Chris Humbert 2005
+ * Copyright (c) Dmitry Baryshkov 2008
+ *    Minor fixes
+ *
+ * Parts copyright Sebastian Carlier
+ *
+ * This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ *
+ */
+
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/mfd/core.h>
+#include <linux/mfd/tmio.h>
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <linux/irq.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/nand.h>
+#include <linux/mtd/nand_ecc.h>
+#include <linux/mtd/partitions.h>
+
+/*--------------------------------------------------------------------------*/
+
+/*
+ * NAND Flash Host Controller Configuration Register
+ */
+#define CCR_COMMAND	0x04	/* w Command				*/
+#define CCR_BASE	0x10	/* l NAND Flash Control Reg Base Addr	*/
+#define CCR_INTP	0x3d	/* b Interrupt Pin			*/
+#define CCR_INTE	0x48	/* b Interrupt Enable			*/
+#define CCR_EC		0x4a	/* b Event Control			*/
+#define CCR_ICC		0x4c	/* b Internal Clock Control		*/
+#define CCR_ECCC	0x5b	/* b ECC Control			*/
+#define CCR_NFTC	0x60	/* b NAND Flash Transaction Control	*/
+#define CCR_NFM		0x61	/* b NAND Flash Monitor			*/
+#define CCR_NFPSC	0x62	/* b NAND Flash Power Supply Control	*/
+#define CCR_NFDC	0x63	/* b NAND Flash Detect Control		*/
+
+/*
+ * NAND Flash Control Register
+ */
+#define FCR_DATA	0x00	/* bwl Data Register			*/
+#define FCR_MODE	0x04	/* b Mode Register			*/
+#define FCR_STATUS	0x05	/* b Status Register			*/
+#define FCR_ISR		0x06	/* b Interrupt Status Register		*/
+#define FCR_IMR		0x07	/* b Interrupt Mask Register		*/
+
+/* FCR_MODE Register Command List */
+#define FCR_MODE_DATA	0x94	/* Data Data_Mode */
+#define FCR_MODE_COMMAND 0x95	/* Data Command_Mode */
+#define FCR_MODE_ADDRESS 0x96	/* Data Address_Mode */
+
+#define FCR_MODE_HWECC_CALC	0xB4	/* HW-ECC Data */
+#define FCR_MODE_HWECC_RESULT	0xD4	/* HW-ECC Calc result Read_Mode */
+#define FCR_MODE_HWECC_RESET	0xF4	/* HW-ECC Reset */
+
+#define FCR_MODE_POWER_ON	0x0C	/* Power Supply ON  to SSFDC card */
+#define FCR_MODE_POWER_OFF	0x08	/* Power Supply OFF to SSFDC card */
+
+#define FCR_MODE_LED_OFF	0x00	/* LED OFF */
+#define FCR_MODE_LED_ON		0x04	/* LED ON */
+
+#define FCR_MODE_EJECT_ON	0x68	/* Ejection events active  */
+#define FCR_MODE_EJECT_OFF	0x08	/* Ejection events ignored */
+
+#define FCR_MODE_LOCK		0x6C	/* Lock_Mode. Eject Switch Invalid */
+#define FCR_MODE_UNLOCK		0x0C	/* UnLock_Mode. Eject Switch is valid */
+
+#define FCR_MODE_CONTROLLER_ID	0x40	/* Controller ID Read */
+#define FCR_MODE_STANDBY	0x00	/* SSFDC card Changes Standby State */
+
+#define FCR_MODE_WE		0x80
+#define FCR_MODE_ECC1		0x40
+#define FCR_MODE_ECC0		0x20
+#define FCR_MODE_CE		0x10
+#define FCR_MODE_PCNT1		0x08
+#define FCR_MODE_PCNT0		0x04
+#define FCR_MODE_ALE		0x02
+#define FCR_MODE_CLE		0x01
+
+#define FCR_STATUS_BUSY		0x80
+
+/*--------------------------------------------------------------------------*/
+
+struct tmio_nand {
+	struct mtd_info mtd;
+	struct nand_chip chip;
+
+	struct platform_device *dev;
+
+	void __iomem *ccr;
+	void __iomem *fcr;
+	unsigned long fcr_phys;
+
+	unsigned int irq;
+
+	/* for tmio_nand_read_byte */
+	u8			read;
+	unsigned read_good:1;
+};
+
+#define mtd_to_tmio(m)			container_of(m, struct tmio_nand, mtd)
+
+#ifdef CONFIG_MTD_CMDLINE_PARTS
+static const char *part_probes[] = { "cmdlinepart", NULL };
+#endif
+
+/*--------------------------------------------------------------------------*/
+
+static void tmio_nand_hwcontrol(struct mtd_info *mtd, int cmd,
+				   unsigned int ctrl)
+{
+	struct tmio_nand *tmio = mtd_to_tmio(mtd);
+	struct nand_chip *chip = mtd->priv;
+
+	if (ctrl & NAND_CTRL_CHANGE) {
+		u8 mode;
+
+		if (ctrl & NAND_NCE) {
+			mode = FCR_MODE_DATA;
+
+			if (ctrl & NAND_CLE)
+				mode |=  FCR_MODE_CLE;
+			else
+				mode &= ~FCR_MODE_CLE;
+
+			if (ctrl & NAND_ALE)
+				mode |=  FCR_MODE_ALE;
+			else
+				mode &= ~FCR_MODE_ALE;
+		} else {
+			mode = FCR_MODE_STANDBY;
+		}
+
+		tmio_iowrite8(mode, tmio->fcr + FCR_MODE);
+		tmio->read_good = 0;
+	}
+
+	if (cmd != NAND_CMD_NONE)
+		tmio_iowrite8(cmd, chip->IO_ADDR_W);
+}
+
+static int tmio_nand_dev_ready(struct mtd_info *mtd)
+{
+	struct tmio_nand *tmio = mtd_to_tmio(mtd);
+
+	return !(tmio_ioread8(tmio->fcr + FCR_STATUS) & FCR_STATUS_BUSY);
+}
+
+static irqreturn_t tmio_irq(int irq, void *__tmio)
+{
+	struct tmio_nand *tmio = __tmio;
+	struct nand_chip *nand_chip = &tmio->chip;
+
+	/* disable RDYREQ interrupt */
+	tmio_iowrite8(0x00, tmio->fcr + FCR_IMR);
+
+	if (unlikely(!waitqueue_active(&nand_chip->controller->wq)))
+		dev_warn(&tmio->dev->dev, "spurious interrupt\n");
+
+	wake_up(&nand_chip->controller->wq);
+	return IRQ_HANDLED;
+}
+
+/*
+  *The TMIO core has a RDYREQ interrupt on the posedge of #SMRB.
+  *This interrupt is normally disabled, but for long operations like
+  *erase and write, we enable it to wake us up.  The irq handler
+  *disables the interrupt.
+ */
+static int
+tmio_nand_wait(struct mtd_info *mtd, struct nand_chip *nand_chip)
+{
+	struct tmio_nand *tmio = mtd_to_tmio(mtd);
+	long timeout;
+
+	/* enable RDYREQ interrupt */
+	tmio_iowrite8(0x0f, tmio->fcr + FCR_ISR);
+	tmio_iowrite8(0x81, tmio->fcr + FCR_IMR);
+
+	timeout = wait_event_timeout(nand_chip->controller->wq,
+		tmio_nand_dev_ready(mtd),
+		msecs_to_jiffies(nand_chip->state == FL_ERASING ? 400 : 20));
+
+	if (unlikely(!tmio_nand_dev_ready(mtd))) {
+		tmio_iowrite8(0x00, tmio->fcr + FCR_IMR);
+		dev_warn(&tmio->dev->dev, "still busy with %s after %d ms\n",
+			nand_chip->state == FL_ERASING ? "erase" : "program",
+			nand_chip->state == FL_ERASING ? 400 : 20);
+
+	} else if (unlikely(!timeout)) {
+		tmio_iowrite8(0x00, tmio->fcr + FCR_IMR);
+		dev_warn(&tmio->dev->dev, "timeout waiting for interrupt\n");
+	}
+
+	nand_chip->cmdfunc(mtd, NAND_CMD_STATUS, -1, -1);
+	return nand_chip->read_byte(mtd);
+}
+
+/*
+  *The TMIO controller combines two 8-bit data bytes into one 16-bit
+  *word. This function separates them so nand_base.c works as expected,
+  *especially its NAND_CMD_READID routines.
+ *
+  *To prevent stale data from being read, tmio_nand_hwcontrol() clears
+  *tmio->read_good.
+ */
+static u_char tmio_nand_read_byte(struct mtd_info *mtd)
+{
+	struct tmio_nand *tmio = mtd_to_tmio(mtd);
+	unsigned int data;
+
+	if (tmio->read_good--)
+		return tmio->read;
+
+	data = tmio_ioread16(tmio->fcr + FCR_DATA);
+	tmio->read = data >> 8;
+	return data;
+}
+
+/*
+  *The TMIO controller converts an 8-bit NAND interface to a 16-bit
+  *bus interface, so all data reads and writes must be 16-bit wide.
+  *Thus, we implement 16-bit versions of the read, write, and verify
+  *buffer functions.
+ */
+static void
+tmio_nand_write_buf(struct mtd_info *mtd, const u_char *buf, int len)
+{
+	struct tmio_nand *tmio = mtd_to_tmio(mtd);
+
+	tmio_iowrite16_rep(tmio->fcr + FCR_DATA, buf, len >> 1);
+}
+
+static void tmio_nand_read_buf(struct mtd_info *mtd, u_char *buf, int len)
+{
+	struct tmio_nand *tmio = mtd_to_tmio(mtd);
+
+	tmio_ioread16_rep(tmio->fcr + FCR_DATA, buf, len >> 1);
+}
+
+static int
+tmio_nand_verify_buf(struct mtd_info *mtd, const u_char *buf, int len)
+{
+	struct tmio_nand *tmio = mtd_to_tmio(mtd);
+	u16				*p = (u16 *) buf;
+
+	for (len >>= 1; len; len--)
+		if (*(p++) != tmio_ioread16(tmio->fcr + FCR_DATA))
+			return -EFAULT;
+	return 0;
+}
+
+static void tmio_nand_enable_hwecc(struct mtd_info *mtd, int mode)
+{
+	struct tmio_nand *tmio = mtd_to_tmio(mtd);
+
+	tmio_iowrite8(FCR_MODE_HWECC_RESET, tmio->fcr + FCR_MODE);
+	tmio_ioread8(tmio->fcr + FCR_DATA);	/* dummy read */
+	tmio_iowrite8(FCR_MODE_HWECC_CALC, tmio->fcr + FCR_MODE);
+}
+
+static int tmio_nand_calculate_ecc(struct mtd_info *mtd, const u_char *dat,
+							u_char *ecc_code)
+{
+	struct tmio_nand *tmio = mtd_to_tmio(mtd);
+	unsigned int ecc;
+
+	tmio_iowrite8(FCR_MODE_HWECC_RESULT, tmio->fcr + FCR_MODE);
+
+	ecc = tmio_ioread16(tmio->fcr + FCR_DATA);
+	ecc_code[1] = ecc;	/* 000-255 LP7-0 */
+	ecc_code[0] = ecc >> 8;	/* 000-255 LP15-8 */
+	ecc = tmio_ioread16(tmio->fcr + FCR_DATA);
+	ecc_code[2] = ecc;	/* 000-255 CP5-0,11b */
+	ecc_code[4] = ecc >> 8;	/* 256-511 LP7-0 */
+	ecc = tmio_ioread16(tmio->fcr + FCR_DATA);
+	ecc_code[3] = ecc;	/* 256-511 LP15-8 */
+	ecc_code[5] = ecc >> 8;	/* 256-511 CP5-0,11b */
+
+	tmio_iowrite8(FCR_MODE_DATA, tmio->fcr + FCR_MODE);
+	return 0;
+}
+
+static int tmio_hw_init(struct platform_device *dev, struct tmio_nand *tmio)
+{
+	struct mfd_cell *cell = (struct mfd_cell *)dev->dev.platform_data;
+	int ret;
+
+	if (cell->enable) {
+		ret = cell->enable(dev);
+		if (ret)
+			return ret;
+	}
+
+	/* (4Ch) CLKRUN Enable    1st spcrunc */
+	tmio_iowrite8(0x81, tmio->ccr + CCR_ICC);
+
+	/* (10h)BaseAddress    0x1000 spba.spba2 */
+	tmio_iowrite16(tmio->fcr_phys, tmio->ccr + CCR_BASE);
+	tmio_iowrite16(tmio->fcr_phys >> 16, tmio->ccr + CCR_BASE + 16);
+
+	/* (04h)Command Register I/O spcmd */
+	tmio_iowrite8(0x02, tmio->ccr + CCR_COMMAND);
+
+	/* (62h) Power Supply Control ssmpwc */
+	/* HardPowerOFF - SuspendOFF - PowerSupplyWait_4MS */
+	tmio_iowrite8(0x02, tmio->ccr + CCR_NFPSC);
+
+	/* (63h) Detect Control ssmdtc */
+	tmio_iowrite8(0x02, tmio->ccr + CCR_NFDC);
+
+	/* Interrupt status register clear sintst */
+	tmio_iowrite8(0x0f, tmio->fcr + FCR_ISR);
+
+	/* After power supply, Media are reset smode */
+	tmio_iowrite8(FCR_MODE_POWER_ON, tmio->fcr + FCR_MODE);
+	tmio_iowrite8(FCR_MODE_COMMAND, tmio->fcr + FCR_MODE);
+	tmio_iowrite8(NAND_CMD_RESET, tmio->fcr + FCR_DATA);
+
+	/* Standby Mode smode */
+	tmio_iowrite8(FCR_MODE_STANDBY, tmio->fcr + FCR_MODE);
+
+	mdelay(5);
+
+	return 0;
+}
+
+static void tmio_hw_stop(struct platform_device *dev, struct tmio_nand *tmio)
+{
+	struct mfd_cell *cell = (struct mfd_cell *)dev->dev.platform_data;
+
+	tmio_iowrite8(FCR_MODE_POWER_OFF, tmio->fcr + FCR_MODE);
+	if (cell->disable)
+		cell->disable(dev);
+}
+
+static int tmio_probe(struct platform_device *dev)
+{
+	struct mfd_cell *cell = (struct mfd_cell *)dev->dev.platform_data;
+	struct tmio_nand_data *data = cell->driver_data;
+	struct resource *fcr = platform_get_resource(dev,
+			IORESOURCE_MEM, 0);
+	struct resource *ccr = platform_get_resource(dev,
+			IORESOURCE_MEM, 1);
+	int irq = platform_get_irq(dev, 0);
+	struct tmio_nand *tmio;
+	struct mtd_info *mtd;
+	struct nand_chip *nand_chip;
+#ifdef CONFIG_MTD_PARTITIONS
+	struct mtd_partition *parts;
+	int nbparts = 0;
+#endif
+	int retval;
+
+	if (data == NULL)
+		dev_warn(&dev->dev, "NULL platform data!\n");
+
+	tmio = kzalloc(sizeof *tmio, GFP_KERNEL);
+	if (!tmio) {
+		retval = -ENOMEM;
+		goto err_kzalloc;
+	}
+
+	tmio->dev = dev;
+
+	platform_set_drvdata(dev, tmio);
+	mtd = &tmio->mtd;
+	nand_chip = &tmio->chip;
+	mtd->priv = nand_chip;
+	mtd->name = "tmio-nand";
+
+	tmio->ccr = ioremap(ccr->start, ccr->end - ccr->start + 1);
+	if (!tmio->ccr) {
+		retval = -EIO;
+		goto err_iomap_ccr;
+	}
+
+	tmio->fcr_phys = (unsigned long)fcr->start;
+	tmio->fcr = ioremap(fcr->start, fcr->end - fcr->start + 1);
+	if (!tmio->fcr) {
+		retval = -EIO;
+		goto err_iomap_fcr;
+	}
+
+	retval = tmio_hw_init(dev, tmio);
+	if (retval)
+		goto err_hwinit;
+
+	/* Set address of NAND IO lines */
+	nand_chip->IO_ADDR_R = tmio->fcr;
+	nand_chip->IO_ADDR_W = tmio->fcr;
+
+	/* Set address of hardware control function */
+	nand_chip->cmd_ctrl = tmio_nand_hwcontrol;
+	nand_chip->dev_ready = tmio_nand_dev_ready;
+	nand_chip->read_byte = tmio_nand_read_byte;
+	nand_chip->write_buf = tmio_nand_write_buf;
+	nand_chip->read_buf = tmio_nand_read_buf;
+	nand_chip->verify_buf = tmio_nand_verify_buf;
+
+	/* set eccmode using hardware ECC */
+	nand_chip->ecc.mode = NAND_ECC_HW;
+	nand_chip->ecc.size = 512;
+	nand_chip->ecc.bytes = 6;
+	nand_chip->ecc.hwctl = tmio_nand_enable_hwecc;
+	nand_chip->ecc.calculate = tmio_nand_calculate_ecc;
+	nand_chip->ecc.correct = nand_correct_data;
+
+	if (data)
+		nand_chip->badblock_pattern = data->badblock_pattern;
+
+	/* 15 us command delay time */
+	nand_chip->chip_delay = 15;
+
+	retval = request_irq(irq, &tmio_irq,
+				IRQF_DISABLED, dev->dev.bus_id, tmio);
+	if (retval) {
+		dev_err(&dev->dev, "request_irq error %d\n", retval);
+		goto err_irq;
+	}
+
+	tmio->irq = irq;
+	nand_chip->waitfunc = tmio_nand_wait;
+
+	/* Scan to find existence of the device */
+	if (nand_scan(mtd, 1)) {
+		retval = -ENODEV;
+		goto err_scan;
+	}
+	/* Register the partitions */
+#ifdef CONFIG_MTD_PARTITIONS
+#ifdef CONFIG_MTD_CMDLINE_PARTS
+	nbparts = parse_mtd_partitions(mtd, part_probes, &parts, 0);
+#endif
+	if (nbparts <= 0 && data) {
+		parts = data->partition;
+		nbparts = data->num_partitions;
+	}
+
+	if (nbparts)
+		retval = add_mtd_partitions(mtd, parts, nbparts);
+	else
+#endif
+	retval = add_mtd_device(mtd);
+
+	if (!retval)
+		return retval;
+
+	nand_release(mtd);
+
+err_scan:
+	if (tmio->irq)
+		free_irq(tmio->irq, tmio);
+err_irq:
+	tmio_hw_stop(dev, tmio);
+err_hwinit:
+	iounmap(tmio->fcr);
+err_iomap_fcr:
+	iounmap(tmio->ccr);
+err_iomap_ccr:
+	kfree(tmio);
+err_kzalloc:
+	return retval;
+}
+
+static int tmio_remove(struct platform_device *dev)
+{
+	struct tmio_nand *tmio = platform_get_drvdata(dev);
+
+	nand_release(&tmio->mtd);
+	if (tmio->irq)
+		free_irq(tmio->irq, tmio);
+	tmio_hw_stop(dev, tmio);
+	iounmap(tmio->fcr);
+	iounmap(tmio->ccr);
+	kfree(tmio);
+	return 0;
+}
+
+#ifdef CONFIG_PM
+static int tmio_suspend(struct platform_device *dev, pm_message_t state)
+{
+	struct mfd_cell *cell = (struct mfd_cell *)dev->dev.platform_data;
+
+	if (cell->suspend)
+		cell->suspend(dev);
+
+	tmio_hw_stop(dev, platform_get_drvdata(dev));
+	return 0;
+}
+
+static int tmio_resume(struct platform_device *dev)
+{
+	struct mfd_cell *cell = (struct mfd_cell *)dev->dev.platform_data;
+
+	/* FIXME - is this required or merely another attack of the broken
+	 * SHARP platform? Looks suspicious.
+	 */
+	tmio_hw_init(dev, platform_get_drvdata(dev));
+
+	if (cell->resume)
+		cell->resume(dev);
+
+	return 0;
+}
+#else
+#define tmio_suspend NULL
+#define tmio_resume NULL
+#endif
+
+static struct platform_driver tmio_driver = {
+	.driver.name	= "tmio-nand",
+	.driver.owner	= THIS_MODULE,
+	.probe		= tmio_probe,
+	.remove		= tmio_remove,
+	.suspend	= tmio_suspend,
+	.resume		= tmio_resume,
+};
+
+static int __init tmio_init(void)
+{
+	return platform_driver_register(&tmio_driver);
+}
+
+static void __exit tmio_exit(void)
+{
+	platform_driver_unregister(&tmio_driver);
+}
+
+module_init(tmio_init);
+module_exit(tmio_exit);
+
+MODULE_LICENSE("GPL v2");
+MODULE_AUTHOR("Ian Molton, Dirk Opfer, Chris Humbert, Dmitry Baryshkov");
+MODULE_DESCRIPTION("NAND flash driver on Toshiba Mobile IO controller");
+MODULE_ALIAS("platform:tmio-nand");
diff --git a/drivers/mtd/nand/toto.c b/drivers/mtd/nand/toto.c
index f9e2d4a0ab8c..bbf492e6830d 100644
--- a/drivers/mtd/nand/toto.c
+++ b/drivers/mtd/nand/toto.c
@@ -14,8 +14,6 @@
  *  Overview:
  *   This is a device driver for the NAND flash device found on the
  *   TI fido board. It supports 32MiB and 64MiB cards
- *
- * $Id: toto.c,v 1.5 2005/11/07 11:14:31 gleixner Exp $
  */
 
 #include <linux/slab.h>
diff --git a/drivers/mtd/nand/ts7250.c b/drivers/mtd/nand/ts7250.c
index f40081069ab2..2c410a011317 100644
--- a/drivers/mtd/nand/ts7250.c
+++ b/drivers/mtd/nand/ts7250.c
@@ -9,8 +9,6 @@
  * Derived from drivers/mtd/nand/autcpu12.c
  *   Copyright (c) 2001 Thomas Gleixner (gleixner@autronix.de)
  *
- * $Id: ts7250.c,v 1.4 2004/12/30 22:02:07 joff Exp $
- *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
@@ -27,7 +25,7 @@
 #include <linux/mtd/nand.h>
 #include <linux/mtd/partitions.h>
 #include <asm/io.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/sizes.h>
 #include <asm/mach-types.h>
 
diff --git a/drivers/mtd/nftlcore.c b/drivers/mtd/nftlcore.c
index 0c9ce19ea27a..320b929abe79 100644
--- a/drivers/mtd/nftlcore.c
+++ b/drivers/mtd/nftlcore.c
@@ -1,7 +1,6 @@
 /* Linux driver for NAND Flash Translation Layer      */
 /* (c) 1999 Machine Vision Holdings, Inc.             */
 /* Author: David Woodhouse <dwmw2@infradead.org>      */
-/* $Id: nftlcore.c,v 1.98 2005/11/07 11:14:21 gleixner Exp $ */
 
 /*
   The contents of this file are distributed under the GNU General
@@ -803,12 +802,8 @@ static struct mtd_blktrans_ops nftl_tr = {
 	.owner		= THIS_MODULE,
 };
 
-extern char nftlmountrev[];
-
 static int __init init_nftl(void)
 {
-	printk(KERN_INFO "NFTL driver: nftlcore.c $Revision: 1.98 $, nftlmount.c %s\n", nftlmountrev);
-
 	return register_mtd_blktrans(&nftl_tr);
 }
 
diff --git a/drivers/mtd/nftlmount.c b/drivers/mtd/nftlmount.c
index 345e6eff89ce..ccc4f209fbb5 100644
--- a/drivers/mtd/nftlmount.c
+++ b/drivers/mtd/nftlmount.c
@@ -4,8 +4,6 @@
  * Author: Fabrice Bellard (fabrice.bellard@netgem.com)
  * Copyright (C) 2000 Netgem S.A.
  *
- * $Id: nftlmount.c,v 1.41 2005/11/07 11:14:21 gleixner Exp $
- *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation; either version 2 of the License, or
@@ -31,8 +29,6 @@
 
 #define SECTORSIZE 512
 
-char nftlmountrev[]="$Revision: 1.41 $";
-
 /* find_boot_record: Find the NFTL Media Header and its Spare copy which contains the
  *	various device information of the NFTL partition and Bad Unit Table. Update
  *	the ReplUnitTable[] table accroding to the Bad Unit Table. ReplUnitTable[]
diff --git a/drivers/mtd/onenand/onenand_base.c b/drivers/mtd/onenand/onenand_base.c
index 5d7965f7e9ce..926cf3a4135d 100644
--- a/drivers/mtd/onenand/onenand_base.c
+++ b/drivers/mtd/onenand/onenand_base.c
@@ -325,28 +325,11 @@ static int onenand_wait(struct mtd_info *mtd, int state)
 
 	ctrl = this->read_word(this->base + ONENAND_REG_CTRL_STATUS);
 
-	if (ctrl & ONENAND_CTRL_ERROR) {
-		printk(KERN_ERR "onenand_wait: controller error = 0x%04x\n", ctrl);
-		if (ctrl & ONENAND_CTRL_LOCK)
-			printk(KERN_ERR "onenand_wait: it's locked error.\n");
-		if (state == FL_READING) {
-			/*
-			 * A power loss while writing can result in a page
-			 * becoming unreadable.  When the device is mounted
-			 * again, reading that page gives controller errors.
-			 * Upper level software like JFFS2 treat -EIO as fatal,
-			 * refusing to mount at all.  That means it is necessary
-			 * to treat the error as an ECC error to allow recovery.
-			 * Note that typically in this case, the eraseblock can
-			 * still be erased and rewritten i.e. it has not become
-			 * a bad block.
-			 */
-			mtd->ecc_stats.failed++;
-			return -EBADMSG;
-		}
-		return -EIO;
-	}
-
+	/*
+	 * In the Spec. it checks the controller status first
+	 * However if you get the correct information in case of
+	 * power off recovery (POR) test, it should read ECC status first
+	 */
 	if (interrupt & ONENAND_INT_READ) {
 		int ecc = this->read_word(this->base + ONENAND_REG_ECC_STATUS);
 		if (ecc) {
@@ -364,6 +347,15 @@ static int onenand_wait(struct mtd_info *mtd, int state)
 		return -EIO;
 	}
 
+	/* If there's controller error, it's a real error */
+	if (ctrl & ONENAND_CTRL_ERROR) {
+		printk(KERN_ERR "onenand_wait: controller error = 0x%04x\n",
+			ctrl);
+		if (ctrl & ONENAND_CTRL_LOCK)
+			printk(KERN_ERR "onenand_wait: it's locked error.\n");
+		return -EIO;
+	}
+
 	return 0;
 }
 
@@ -1135,22 +1127,26 @@ static int onenand_bbt_wait(struct mtd_info *mtd, int state)
 	interrupt = this->read_word(this->base + ONENAND_REG_INTERRUPT);
 	ctrl = this->read_word(this->base + ONENAND_REG_CTRL_STATUS);
 
-	/* Initial bad block case: 0x2400 or 0x0400 */
-	if (ctrl & ONENAND_CTRL_ERROR) {
-		printk(KERN_DEBUG "onenand_bbt_wait: controller error = 0x%04x\n", ctrl);
-		return ONENAND_BBT_READ_ERROR;
-	}
-
 	if (interrupt & ONENAND_INT_READ) {
 		int ecc = this->read_word(this->base + ONENAND_REG_ECC_STATUS);
-		if (ecc & ONENAND_ECC_2BIT_ALL)
+		if (ecc & ONENAND_ECC_2BIT_ALL) {
+			printk(KERN_INFO "onenand_bbt_wait: ecc error = 0x%04x"
+				", controller error 0x%04x\n", ecc, ctrl);
 			return ONENAND_BBT_READ_ERROR;
+		}
 	} else {
 		printk(KERN_ERR "onenand_bbt_wait: read timeout!"
 			"ctrl=0x%04x intr=0x%04x\n", ctrl, interrupt);
 		return ONENAND_BBT_READ_FATAL_ERROR;
 	}
 
+	/* Initial bad block case: 0x2400 or 0x0400 */
+	if (ctrl & ONENAND_CTRL_ERROR) {
+		printk(KERN_DEBUG "onenand_bbt_wait: "
+			"controller error = 0x%04x\n", ctrl);
+		return ONENAND_BBT_READ_ERROR;
+	}
+
 	return 0;
 }
 
diff --git a/drivers/mtd/redboot.c b/drivers/mtd/redboot.c
index c5030f94f04e..2d600a1bf2aa 100644
--- a/drivers/mtd/redboot.c
+++ b/drivers/mtd/redboot.c
@@ -1,6 +1,4 @@
 /*
- * $Id: redboot.c,v 1.21 2006/03/30 18:34:37 bjd Exp $
- *
  * Parse RedBoot-style Flash Image System (FIS) tables and
  * produce a Linux partition array to match.
  */
diff --git a/drivers/mtd/rfd_ftl.c b/drivers/mtd/rfd_ftl.c
index c84e45465499..e538c0a72abb 100644
--- a/drivers/mtd/rfd_ftl.c
+++ b/drivers/mtd/rfd_ftl.c
@@ -3,8 +3,6 @@
  *
  * Copyright (C) 2005  Sean Young <sean@mess.org>
  *
- * $Id: rfd_ftl.c,v 1.8 2006/01/15 12:51:44 sean Exp $
- *
  * This type of flash translation layer (FTL) is used by the Embedded BIOS
  * by General Software. It is known as the Resident Flash Disk (RFD), see:
  *
diff --git a/drivers/mtd/ubi/build.c b/drivers/mtd/ubi/build.c
index 961416ac0616..c7630a228310 100644
--- a/drivers/mtd/ubi/build.c
+++ b/drivers/mtd/ubi/build.c
@@ -51,14 +51,13 @@
  * @name: MTD device name or number string
  * @vid_hdr_offs: VID header offset
  */
-struct mtd_dev_param
-{
+struct mtd_dev_param {
 	char name[MTD_PARAM_LEN_MAX];
 	int vid_hdr_offs;
 };
 
 /* Numbers of elements set in the @mtd_dev_param array */
-static int mtd_devs = 0;
+static int mtd_devs;
 
 /* MTD devices specification parameters */
 static struct mtd_dev_param mtd_dev_param[UBI_MAX_DEVICES];
@@ -160,8 +159,7 @@ void ubi_put_device(struct ubi_device *ubi)
 }
 
 /**
- * ubi_get_by_major - get UBI device description object by character device
- *                    major number.
+ * ubi_get_by_major - get UBI device by character device major number.
  * @major: major number
  *
  * This function is similar to 'ubi_get_device()', but it searches the device
@@ -355,15 +353,34 @@ static void kill_volumes(struct ubi_device *ubi)
 }
 
 /**
+ * free_user_volumes - free all user volumes.
+ * @ubi: UBI device description object
+ *
+ * Normally the volumes are freed at the release function of the volume device
+ * objects. However, on error paths the volumes have to be freed before the
+ * device objects have been initialized.
+ */
+static void free_user_volumes(struct ubi_device *ubi)
+{
+	int i;
+
+	for (i = 0; i < ubi->vtbl_slots; i++)
+		if (ubi->volumes[i]) {
+			kfree(ubi->volumes[i]->eba_tbl);
+			kfree(ubi->volumes[i]);
+		}
+}
+
+/**
  * uif_init - initialize user interfaces for an UBI device.
  * @ubi: UBI device description object
  *
  * This function returns zero in case of success and a negative error code in
- * case of failure.
+ * case of failure. Note, this function destroys all volumes if it failes.
  */
 static int uif_init(struct ubi_device *ubi)
 {
-	int i, err;
+	int i, err, do_free = 0;
 	dev_t dev;
 
 	sprintf(ubi->ubi_name, UBI_NAME_STR "%d", ubi->ubi_num);
@@ -384,7 +401,7 @@ static int uif_init(struct ubi_device *ubi)
 
 	ubi_assert(MINOR(dev) == 0);
 	cdev_init(&ubi->cdev, &ubi_cdev_operations);
-	dbg_msg("%s major is %u", ubi->ubi_name, MAJOR(dev));
+	dbg_gen("%s major is %u", ubi->ubi_name, MAJOR(dev));
 	ubi->cdev.owner = THIS_MODULE;
 
 	err = cdev_add(&ubi->cdev, dev, 1);
@@ -410,10 +427,13 @@ static int uif_init(struct ubi_device *ubi)
 
 out_volumes:
 	kill_volumes(ubi);
+	do_free = 0;
 out_sysfs:
 	ubi_sysfs_close(ubi);
 	cdev_del(&ubi->cdev);
 out_unreg:
+	if (do_free)
+		free_user_volumes(ubi);
 	unregister_chrdev_region(ubi->cdev.dev, ubi->vtbl_slots + 1);
 	ubi_err("cannot initialize UBI %s, error %d", ubi->ubi_name, err);
 	return err;
@@ -422,6 +442,10 @@ out_unreg:
 /**
  * uif_close - close user interfaces for an UBI device.
  * @ubi: UBI device description object
+ *
+ * Note, since this function un-registers UBI volume device objects (@vol->dev),
+ * the memory allocated voe the volumes is freed as well (in the release
+ * function).
  */
 static void uif_close(struct ubi_device *ubi)
 {
@@ -432,6 +456,21 @@ static void uif_close(struct ubi_device *ubi)
 }
 
 /**
+ * free_internal_volumes - free internal volumes.
+ * @ubi: UBI device description object
+ */
+static void free_internal_volumes(struct ubi_device *ubi)
+{
+	int i;
+
+	for (i = ubi->vtbl_slots;
+	     i < ubi->vtbl_slots + UBI_INT_VOL_COUNT; i++) {
+		kfree(ubi->volumes[i]->eba_tbl);
+		kfree(ubi->volumes[i]);
+	}
+}
+
+/**
  * attach_by_scanning - attach an MTD device using scanning method.
  * @ubi: UBI device descriptor
  *
@@ -475,6 +514,7 @@ static int attach_by_scanning(struct ubi_device *ubi)
 out_wl:
 	ubi_wl_close(ubi);
 out_vtbl:
+	free_internal_volumes(ubi);
 	vfree(ubi->vtbl);
 out_si:
 	ubi_scan_destroy_si(si);
@@ -482,7 +522,7 @@ out_si:
 }
 
 /**
- * io_init - initialize I/O unit for a given UBI device.
+ * io_init - initialize I/O sub-system for a given UBI device.
  * @ubi: UBI device description object
  *
  * If @ubi->vid_hdr_offset or @ubi->leb_start is zero, default offsets are
@@ -530,7 +570,11 @@ static int io_init(struct ubi_device *ubi)
 	ubi->min_io_size = ubi->mtd->writesize;
 	ubi->hdrs_min_io_size = ubi->mtd->writesize >> ubi->mtd->subpage_sft;
 
-	/* Make sure minimal I/O unit is power of 2 */
+	/*
+	 * Make sure minimal I/O unit is power of 2. Note, there is no
+	 * fundamental reason for this assumption. It is just an optimization
+	 * which allows us to avoid costly division operations.
+	 */
 	if (!is_power_of_2(ubi->min_io_size)) {
 		ubi_err("min. I/O unit (%d) is not power of 2",
 			ubi->min_io_size);
@@ -581,7 +625,7 @@ static int io_init(struct ubi_device *ubi)
 	if (ubi->vid_hdr_offset < UBI_EC_HDR_SIZE ||
 	    ubi->leb_start < ubi->vid_hdr_offset + UBI_VID_HDR_SIZE ||
 	    ubi->leb_start > ubi->peb_size - UBI_VID_HDR_SIZE ||
-	    ubi->leb_start % ubi->min_io_size) {
+	    ubi->leb_start & (ubi->min_io_size - 1)) {
 		ubi_err("bad VID header (%d) or data offsets (%d)",
 			ubi->vid_hdr_offset, ubi->leb_start);
 		return -EINVAL;
@@ -646,7 +690,7 @@ static int autoresize(struct ubi_device *ubi, int vol_id)
 
 	/*
 	 * Clear the auto-resize flag in the volume in-memory copy of the
-	 * volume table, and 'ubi_resize_volume()' will propogate this change
+	 * volume table, and 'ubi_resize_volume()' will propagate this change
 	 * to the flash.
 	 */
 	ubi->vtbl[vol_id].flags &= ~UBI_VTBL_AUTORESIZE_FLG;
@@ -655,7 +699,7 @@ static int autoresize(struct ubi_device *ubi, int vol_id)
 		struct ubi_vtbl_record vtbl_rec;
 
 		/*
-		 * No avalilable PEBs to re-size the volume, clear the flag on
+		 * No available PEBs to re-size the volume, clear the flag on
 		 * flash and exit.
 		 */
 		memcpy(&vtbl_rec, &ubi->vtbl[vol_id],
@@ -682,13 +726,13 @@ static int autoresize(struct ubi_device *ubi, int vol_id)
 
 /**
  * ubi_attach_mtd_dev - attach an MTD device.
- * @mtd_dev: MTD device description object
+ * @mtd: MTD device description object
  * @ubi_num: number to assign to the new UBI device
  * @vid_hdr_offset: VID header offset
  *
  * This function attaches MTD device @mtd_dev to UBI and assign @ubi_num number
  * to the newly created UBI device, unless @ubi_num is %UBI_DEV_NUM_AUTO, in
- * which case this function finds a vacant device nubert and assings it
+ * which case this function finds a vacant device number and assigns it
  * automatically. Returns the new UBI device number in case of success and a
  * negative error code in case of failure.
  *
@@ -698,7 +742,7 @@ static int autoresize(struct ubi_device *ubi, int vol_id)
 int ubi_attach_mtd_dev(struct mtd_info *mtd, int ubi_num, int vid_hdr_offset)
 {
 	struct ubi_device *ubi;
-	int i, err;
+	int i, err, do_free = 1;
 
 	/*
 	 * Check if we already have the same MTD device attached.
@@ -735,7 +779,8 @@ int ubi_attach_mtd_dev(struct mtd_info *mtd, int ubi_num, int vid_hdr_offset)
 			if (!ubi_devices[ubi_num])
 				break;
 		if (ubi_num == UBI_MAX_DEVICES) {
-			dbg_err("only %d UBI devices may be created", UBI_MAX_DEVICES);
+			dbg_err("only %d UBI devices may be created",
+				UBI_MAX_DEVICES);
 			return -ENFILE;
 		}
 	} else {
@@ -760,6 +805,7 @@ int ubi_attach_mtd_dev(struct mtd_info *mtd, int ubi_num, int vid_hdr_offset)
 
 	mutex_init(&ubi->buf_mutex);
 	mutex_init(&ubi->ckvol_mutex);
+	mutex_init(&ubi->mult_mutex);
 	mutex_init(&ubi->volumes_mutex);
 	spin_lock_init(&ubi->volumes_lock);
 
@@ -798,7 +844,7 @@ int ubi_attach_mtd_dev(struct mtd_info *mtd, int ubi_num, int vid_hdr_offset)
 
 	err = uif_init(ubi);
 	if (err)
-		goto out_detach;
+		goto out_nofree;
 
 	ubi->bgt_thread = kthread_create(ubi_thread, ubi, ubi->bgt_name);
 	if (IS_ERR(ubi->bgt_thread)) {
@@ -824,20 +870,22 @@ int ubi_attach_mtd_dev(struct mtd_info *mtd, int ubi_num, int vid_hdr_offset)
 		ubi->beb_rsvd_pebs);
 	ubi_msg("max/mean erase counter: %d/%d", ubi->max_ec, ubi->mean_ec);
 
-	/* Enable the background thread */
-	if (!DBG_DISABLE_BGT) {
+	if (!DBG_DISABLE_BGT)
 		ubi->thread_enabled = 1;
-		wake_up_process(ubi->bgt_thread);
-	}
+	wake_up_process(ubi->bgt_thread);
 
 	ubi_devices[ubi_num] = ubi;
 	return ubi_num;
 
 out_uif:
 	uif_close(ubi);
+out_nofree:
+	do_free = 0;
 out_detach:
-	ubi_eba_close(ubi);
 	ubi_wl_close(ubi);
+	if (do_free)
+		free_user_volumes(ubi);
+	free_internal_volumes(ubi);
 	vfree(ubi->vtbl);
 out_free:
 	vfree(ubi->peb_buf1);
@@ -899,8 +947,8 @@ int ubi_detach_mtd_dev(int ubi_num, int anyway)
 		kthread_stop(ubi->bgt_thread);
 
 	uif_close(ubi);
-	ubi_eba_close(ubi);
 	ubi_wl_close(ubi);
+	free_internal_volumes(ubi);
 	vfree(ubi->vtbl);
 	put_mtd_device(ubi->mtd);
 	vfree(ubi->peb_buf1);
@@ -1044,8 +1092,7 @@ static void __exit ubi_exit(void)
 module_exit(ubi_exit);
 
 /**
- * bytes_str_to_int - convert a string representing number of bytes to an
- * integer.
+ * bytes_str_to_int - convert a number of bytes string into an integer.
  * @str: the string to convert
  *
  * This function returns positive resulting integer in case of success and a
diff --git a/drivers/mtd/ubi/cdev.c b/drivers/mtd/ubi/cdev.c
index 89193ba9451e..03c759b4eeb5 100644
--- a/drivers/mtd/ubi/cdev.c
+++ b/drivers/mtd/ubi/cdev.c
@@ -39,9 +39,9 @@
 #include <linux/stat.h>
 #include <linux/ioctl.h>
 #include <linux/capability.h>
+#include <linux/uaccess.h>
 #include <linux/smp_lock.h>
 #include <mtd/ubi-user.h>
-#include <asm/uaccess.h>
 #include <asm/div64.h>
 #include "ubi.h"
 
@@ -116,7 +116,7 @@ static int vol_cdev_open(struct inode *inode, struct file *file)
 	else
 		mode = UBI_READONLY;
 
-	dbg_msg("open volume %d, mode %d", vol_id, mode);
+	dbg_gen("open volume %d, mode %d", vol_id, mode);
 
 	desc = ubi_open_volume(ubi_num, vol_id, mode);
 	unlock_kernel();
@@ -132,7 +132,7 @@ static int vol_cdev_release(struct inode *inode, struct file *file)
 	struct ubi_volume_desc *desc = file->private_data;
 	struct ubi_volume *vol = desc->vol;
 
-	dbg_msg("release volume %d, mode %d", vol->vol_id, desc->mode);
+	dbg_gen("release volume %d, mode %d", vol->vol_id, desc->mode);
 
 	if (vol->updating) {
 		ubi_warn("update of volume %d not finished, volume is damaged",
@@ -141,7 +141,7 @@ static int vol_cdev_release(struct inode *inode, struct file *file)
 		vol->updating = 0;
 		vfree(vol->upd_buf);
 	} else if (vol->changing_leb) {
-		dbg_msg("only %lld of %lld bytes received for atomic LEB change"
+		dbg_gen("only %lld of %lld bytes received for atomic LEB change"
 			" for volume %d:%d, cancel", vol->upd_received,
 			vol->upd_bytes, vol->ubi->ubi_num, vol->vol_id);
 		vol->changing_leb = 0;
@@ -183,7 +183,7 @@ static loff_t vol_cdev_llseek(struct file *file, loff_t offset, int origin)
 		return -EINVAL;
 	}
 
-	dbg_msg("seek volume %d, offset %lld, origin %d, new offset %lld",
+	dbg_gen("seek volume %d, offset %lld, origin %d, new offset %lld",
 		vol->vol_id, offset, origin, new_offset);
 
 	file->f_pos = new_offset;
@@ -201,7 +201,7 @@ static ssize_t vol_cdev_read(struct file *file, __user char *buf, size_t count,
 	void *tbuf;
 	uint64_t tmp;
 
-	dbg_msg("read %zd bytes from offset %lld of volume %d",
+	dbg_gen("read %zd bytes from offset %lld of volume %d",
 		count, *offp, vol->vol_id);
 
 	if (vol->updating) {
@@ -216,7 +216,7 @@ static ssize_t vol_cdev_read(struct file *file, __user char *buf, size_t count,
 		return 0;
 
 	if (vol->corrupted)
-		dbg_msg("read from corrupted volume %d", vol->vol_id);
+		dbg_gen("read from corrupted volume %d", vol->vol_id);
 
 	if (*offp + count > vol->used_bytes)
 		count_save = count = vol->used_bytes - *offp;
@@ -285,7 +285,7 @@ static ssize_t vol_cdev_direct_write(struct file *file, const char __user *buf,
 	char *tbuf;
 	uint64_t tmp;
 
-	dbg_msg("requested: write %zd bytes to offset %lld of volume %u",
+	dbg_gen("requested: write %zd bytes to offset %lld of volume %u",
 		count, *offp, vol->vol_id);
 
 	if (vol->vol_type == UBI_STATIC_VOLUME)
@@ -295,7 +295,7 @@ static ssize_t vol_cdev_direct_write(struct file *file, const char __user *buf,
 	off = do_div(tmp, vol->usable_leb_size);
 	lnum = tmp;
 
-	if (off % ubi->min_io_size) {
+	if (off & (ubi->min_io_size - 1)) {
 		dbg_err("unaligned position");
 		return -EINVAL;
 	}
@@ -304,7 +304,7 @@ static ssize_t vol_cdev_direct_write(struct file *file, const char __user *buf,
 		count_save = count = vol->used_bytes - *offp;
 
 	/* We can write only in fractions of the minimum I/O unit */
-	if (count % ubi->min_io_size) {
+	if (count & (ubi->min_io_size - 1)) {
 		dbg_err("unaligned write length");
 		return -EINVAL;
 	}
@@ -352,7 +352,7 @@ static ssize_t vol_cdev_direct_write(struct file *file, const char __user *buf,
 }
 
 #else
-#define vol_cdev_direct_write(file, buf, count, offp) -EPERM
+#define vol_cdev_direct_write(file, buf, count, offp) (-EPERM)
 #endif /* CONFIG_MTD_UBI_DEBUG_USERSPACE_IO */
 
 static ssize_t vol_cdev_write(struct file *file, const char __user *buf,
@@ -437,7 +437,8 @@ static int vol_cdev_ioctl(struct inode *inode, struct file *file,
 			break;
 		}
 
-		rsvd_bytes = vol->reserved_pebs * (ubi->leb_size-vol->data_pad);
+		rsvd_bytes = (long long)vol->reserved_pebs *
+					ubi->leb_size-vol->data_pad;
 		if (bytes < 0 || bytes > rsvd_bytes) {
 			err = -EINVAL;
 			break;
@@ -513,7 +514,7 @@ static int vol_cdev_ioctl(struct inode *inode, struct file *file,
 			break;
 		}
 
-		dbg_msg("erase LEB %d:%d", vol->vol_id, lnum);
+		dbg_gen("erase LEB %d:%d", vol->vol_id, lnum);
 		err = ubi_eba_unmap_leb(ubi, vol, lnum);
 		if (err)
 			break;
@@ -564,7 +565,7 @@ static int verify_mkvol_req(const struct ubi_device *ubi,
 	if (req->alignment > ubi->leb_size)
 		goto bad;
 
-	n = req->alignment % ubi->min_io_size;
+	n = req->alignment & (ubi->min_io_size - 1);
 	if (req->alignment != 1 && n)
 		goto bad;
 
@@ -573,6 +574,10 @@ static int verify_mkvol_req(const struct ubi_device *ubi,
 		goto bad;
 	}
 
+	n = strnlen(req->name, req->name_len + 1);
+	if (n != req->name_len)
+		goto bad;
+
 	return 0;
 
 bad:
@@ -600,6 +605,166 @@ static int verify_rsvol_req(const struct ubi_device *ubi,
 	return 0;
 }
 
+/**
+ * rename_volumes - rename UBI volumes.
+ * @ubi: UBI device description object
+ * @req: volumes re-name request
+ *
+ * This is a helper function for the volume re-name IOCTL which validates the
+ * the request, opens the volume and calls corresponding volumes management
+ * function. Returns zero in case of success and a negative error code in case
+ * of failure.
+ */
+static int rename_volumes(struct ubi_device *ubi,
+			  struct ubi_rnvol_req *req)
+{
+	int i, n, err;
+	struct list_head rename_list;
+	struct ubi_rename_entry *re, *re1;
+
+	if (req->count < 0 || req->count > UBI_MAX_RNVOL)
+		return -EINVAL;
+
+	if (req->count == 0)
+		return 0;
+
+	/* Validate volume IDs and names in the request */
+	for (i = 0; i < req->count; i++) {
+		if (req->ents[i].vol_id < 0 ||
+		    req->ents[i].vol_id >= ubi->vtbl_slots)
+			return -EINVAL;
+		if (req->ents[i].name_len < 0)
+			return -EINVAL;
+		if (req->ents[i].name_len > UBI_VOL_NAME_MAX)
+			return -ENAMETOOLONG;
+		req->ents[i].name[req->ents[i].name_len] = '\0';
+		n = strlen(req->ents[i].name);
+		if (n != req->ents[i].name_len)
+			err = -EINVAL;
+	}
+
+	/* Make sure volume IDs and names are unique */
+	for (i = 0; i < req->count - 1; i++) {
+		for (n = i + 1; n < req->count; n++) {
+			if (req->ents[i].vol_id == req->ents[n].vol_id) {
+				dbg_err("duplicated volume id %d",
+					req->ents[i].vol_id);
+				return -EINVAL;
+			}
+			if (!strcmp(req->ents[i].name, req->ents[n].name)) {
+				dbg_err("duplicated volume name \"%s\"",
+					req->ents[i].name);
+				return -EINVAL;
+			}
+		}
+	}
+
+	/* Create the re-name list */
+	INIT_LIST_HEAD(&rename_list);
+	for (i = 0; i < req->count; i++) {
+		int vol_id = req->ents[i].vol_id;
+		int name_len = req->ents[i].name_len;
+		const char *name = req->ents[i].name;
+
+		re = kzalloc(sizeof(struct ubi_rename_entry), GFP_KERNEL);
+		if (!re) {
+			err = -ENOMEM;
+			goto out_free;
+		}
+
+		re->desc = ubi_open_volume(ubi->ubi_num, vol_id, UBI_EXCLUSIVE);
+		if (IS_ERR(re->desc)) {
+			err = PTR_ERR(re->desc);
+			dbg_err("cannot open volume %d, error %d", vol_id, err);
+			kfree(re);
+			goto out_free;
+		}
+
+		/* Skip this re-naming if the name does not really change */
+		if (re->desc->vol->name_len == name_len &&
+		    !memcmp(re->desc->vol->name, name, name_len)) {
+			ubi_close_volume(re->desc);
+			kfree(re);
+			continue;
+		}
+
+		re->new_name_len = name_len;
+		memcpy(re->new_name, name, name_len);
+		list_add_tail(&re->list, &rename_list);
+		dbg_msg("will rename volume %d from \"%s\" to \"%s\"",
+			vol_id, re->desc->vol->name, name);
+	}
+
+	if (list_empty(&rename_list))
+		return 0;
+
+	/* Find out the volumes which have to be removed */
+	list_for_each_entry(re, &rename_list, list) {
+		struct ubi_volume_desc *desc;
+		int no_remove_needed = 0;
+
+		/*
+		 * Volume @re->vol_id is going to be re-named to
+		 * @re->new_name, while its current name is @name. If a volume
+		 * with name @re->new_name currently exists, it has to be
+		 * removed, unless it is also re-named in the request (@req).
+		 */
+		list_for_each_entry(re1, &rename_list, list) {
+			if (re->new_name_len == re1->desc->vol->name_len &&
+			    !memcmp(re->new_name, re1->desc->vol->name,
+				    re1->desc->vol->name_len)) {
+				no_remove_needed = 1;
+				break;
+			}
+		}
+
+		if (no_remove_needed)
+			continue;
+
+		/*
+		 * It seems we need to remove volume with name @re->new_name,
+		 * if it exists.
+		 */
+		desc = ubi_open_volume_nm(ubi->ubi_num, re->new_name, UBI_EXCLUSIVE);
+		if (IS_ERR(desc)) {
+			err = PTR_ERR(desc);
+			if (err == -ENODEV)
+				/* Re-naming into a non-existing volume name */
+				continue;
+
+			/* The volume exists but busy, or an error occurred */
+			dbg_err("cannot open volume \"%s\", error %d",
+				re->new_name, err);
+			goto out_free;
+		}
+
+		re = kzalloc(sizeof(struct ubi_rename_entry), GFP_KERNEL);
+		if (!re) {
+			err = -ENOMEM;
+			ubi_close_volume(desc);
+			goto out_free;
+		}
+
+		re->remove = 1;
+		re->desc = desc;
+		list_add(&re->list, &rename_list);
+		dbg_msg("will remove volume %d, name \"%s\"",
+			re->desc->vol->vol_id, re->desc->vol->name);
+	}
+
+	mutex_lock(&ubi->volumes_mutex);
+	err = ubi_rename_volumes(ubi, &rename_list);
+	mutex_unlock(&ubi->volumes_mutex);
+
+out_free:
+	list_for_each_entry_safe(re, re1, &rename_list, list) {
+		ubi_close_volume(re->desc);
+		list_del(&re->list);
+		kfree(re);
+	}
+	return err;
+}
+
 static int ubi_cdev_ioctl(struct inode *inode, struct file *file,
 			  unsigned int cmd, unsigned long arg)
 {
@@ -621,19 +786,18 @@ static int ubi_cdev_ioctl(struct inode *inode, struct file *file,
 	{
 		struct ubi_mkvol_req req;
 
-		dbg_msg("create volume");
+		dbg_gen("create volume");
 		err = copy_from_user(&req, argp, sizeof(struct ubi_mkvol_req));
 		if (err) {
 			err = -EFAULT;
 			break;
 		}
 
+		req.name[req.name_len] = '\0';
 		err = verify_mkvol_req(ubi, &req);
 		if (err)
 			break;
 
-		req.name[req.name_len] = '\0';
-
 		mutex_lock(&ubi->volumes_mutex);
 		err = ubi_create_volume(ubi, &req);
 		mutex_unlock(&ubi->volumes_mutex);
@@ -652,7 +816,7 @@ static int ubi_cdev_ioctl(struct inode *inode, struct file *file,
 	{
 		int vol_id;
 
-		dbg_msg("remove volume");
+		dbg_gen("remove volume");
 		err = get_user(vol_id, (__user int32_t *)argp);
 		if (err) {
 			err = -EFAULT;
@@ -666,7 +830,7 @@ static int ubi_cdev_ioctl(struct inode *inode, struct file *file,
 		}
 
 		mutex_lock(&ubi->volumes_mutex);
-		err = ubi_remove_volume(desc);
+		err = ubi_remove_volume(desc, 0);
 		mutex_unlock(&ubi->volumes_mutex);
 
 		/*
@@ -685,7 +849,7 @@ static int ubi_cdev_ioctl(struct inode *inode, struct file *file,
 		uint64_t tmp;
 		struct ubi_rsvol_req req;
 
-		dbg_msg("re-size volume");
+		dbg_gen("re-size volume");
 		err = copy_from_user(&req, argp, sizeof(struct ubi_rsvol_req));
 		if (err) {
 			err = -EFAULT;
@@ -713,6 +877,32 @@ static int ubi_cdev_ioctl(struct inode *inode, struct file *file,
 		break;
 	}
 
+	/* Re-name volumes command */
+	case UBI_IOCRNVOL:
+	{
+		struct ubi_rnvol_req *req;
+
+		dbg_msg("re-name volumes");
+		req = kmalloc(sizeof(struct ubi_rnvol_req), GFP_KERNEL);
+		if (!req) {
+			err = -ENOMEM;
+			break;
+		};
+
+		err = copy_from_user(req, argp, sizeof(struct ubi_rnvol_req));
+		if (err) {
+			err = -EFAULT;
+			kfree(req);
+			break;
+		}
+
+		mutex_lock(&ubi->mult_mutex);
+		err = rename_volumes(ubi, req);
+		mutex_unlock(&ubi->mult_mutex);
+		kfree(req);
+		break;
+	}
+
 	default:
 		err = -ENOTTY;
 		break;
@@ -738,7 +928,7 @@ static int ctrl_cdev_ioctl(struct inode *inode, struct file *file,
 		struct ubi_attach_req req;
 		struct mtd_info *mtd;
 
-		dbg_msg("attach MTD device");
+		dbg_gen("attach MTD device");
 		err = copy_from_user(&req, argp, sizeof(struct ubi_attach_req));
 		if (err) {
 			err = -EFAULT;
@@ -778,7 +968,7 @@ static int ctrl_cdev_ioctl(struct inode *inode, struct file *file,
 	{
 		int ubi_num;
 
-		dbg_msg("dettach MTD device");
+		dbg_gen("dettach MTD device");
 		err = get_user(ubi_num, (__user int32_t *)argp);
 		if (err) {
 			err = -EFAULT;
diff --git a/drivers/mtd/ubi/debug.c b/drivers/mtd/ubi/debug.c
index 56956ec2845f..c0ed60e8ade9 100644
--- a/drivers/mtd/ubi/debug.c
+++ b/drivers/mtd/ubi/debug.c
@@ -24,7 +24,7 @@
  * changes.
  */
 
-#ifdef CONFIG_MTD_UBI_DEBUG_MSG
+#ifdef CONFIG_MTD_UBI_DEBUG
 
 #include "ubi.h"
 
@@ -34,14 +34,19 @@
  */
 void ubi_dbg_dump_ec_hdr(const struct ubi_ec_hdr *ec_hdr)
 {
-	dbg_msg("erase counter header dump:");
-	dbg_msg("magic          %#08x", be32_to_cpu(ec_hdr->magic));
-	dbg_msg("version        %d",    (int)ec_hdr->version);
-	dbg_msg("ec             %llu",  (long long)be64_to_cpu(ec_hdr->ec));
-	dbg_msg("vid_hdr_offset %d",    be32_to_cpu(ec_hdr->vid_hdr_offset));
-	dbg_msg("data_offset    %d",    be32_to_cpu(ec_hdr->data_offset));
-	dbg_msg("hdr_crc        %#08x", be32_to_cpu(ec_hdr->hdr_crc));
-	dbg_msg("erase counter header hexdump:");
+	printk(KERN_DEBUG "Erase counter header dump:\n");
+	printk(KERN_DEBUG "\tmagic          %#08x\n",
+	       be32_to_cpu(ec_hdr->magic));
+	printk(KERN_DEBUG "\tversion        %d\n", (int)ec_hdr->version);
+	printk(KERN_DEBUG "\tec             %llu\n",
+	       (long long)be64_to_cpu(ec_hdr->ec));
+	printk(KERN_DEBUG "\tvid_hdr_offset %d\n",
+	       be32_to_cpu(ec_hdr->vid_hdr_offset));
+	printk(KERN_DEBUG "\tdata_offset    %d\n",
+	       be32_to_cpu(ec_hdr->data_offset));
+	printk(KERN_DEBUG "\thdr_crc        %#08x\n",
+	       be32_to_cpu(ec_hdr->hdr_crc));
+	printk(KERN_DEBUG "erase counter header hexdump:\n");
 	print_hex_dump(KERN_DEBUG, "", DUMP_PREFIX_OFFSET, 32, 1,
 		       ec_hdr, UBI_EC_HDR_SIZE, 1);
 }
@@ -52,22 +57,23 @@ void ubi_dbg_dump_ec_hdr(const struct ubi_ec_hdr *ec_hdr)
  */
 void ubi_dbg_dump_vid_hdr(const struct ubi_vid_hdr *vid_hdr)
 {
-	dbg_msg("volume identifier header dump:");
-	dbg_msg("magic     %08x", be32_to_cpu(vid_hdr->magic));
-	dbg_msg("version   %d",   (int)vid_hdr->version);
-	dbg_msg("vol_type  %d",   (int)vid_hdr->vol_type);
-	dbg_msg("copy_flag %d",   (int)vid_hdr->copy_flag);
-	dbg_msg("compat    %d",   (int)vid_hdr->compat);
-	dbg_msg("vol_id    %d",   be32_to_cpu(vid_hdr->vol_id));
-	dbg_msg("lnum      %d",   be32_to_cpu(vid_hdr->lnum));
-	dbg_msg("leb_ver   %u",   be32_to_cpu(vid_hdr->leb_ver));
-	dbg_msg("data_size %d",   be32_to_cpu(vid_hdr->data_size));
-	dbg_msg("used_ebs  %d",   be32_to_cpu(vid_hdr->used_ebs));
-	dbg_msg("data_pad  %d",   be32_to_cpu(vid_hdr->data_pad));
-	dbg_msg("sqnum     %llu",
+	printk(KERN_DEBUG "Volume identifier header dump:\n");
+	printk(KERN_DEBUG "\tmagic     %08x\n", be32_to_cpu(vid_hdr->magic));
+	printk(KERN_DEBUG "\tversion   %d\n",   (int)vid_hdr->version);
+	printk(KERN_DEBUG "\tvol_type  %d\n",   (int)vid_hdr->vol_type);
+	printk(KERN_DEBUG "\tcopy_flag %d\n",   (int)vid_hdr->copy_flag);
+	printk(KERN_DEBUG "\tcompat    %d\n",   (int)vid_hdr->compat);
+	printk(KERN_DEBUG "\tvol_id    %d\n",   be32_to_cpu(vid_hdr->vol_id));
+	printk(KERN_DEBUG "\tlnum      %d\n",   be32_to_cpu(vid_hdr->lnum));
+	printk(KERN_DEBUG "\tdata_size %d\n",   be32_to_cpu(vid_hdr->data_size));
+	printk(KERN_DEBUG "\tused_ebs  %d\n",   be32_to_cpu(vid_hdr->used_ebs));
+	printk(KERN_DEBUG "\tdata_pad  %d\n",   be32_to_cpu(vid_hdr->data_pad));
+	printk(KERN_DEBUG "\tsqnum     %llu\n",
 		(unsigned long long)be64_to_cpu(vid_hdr->sqnum));
-	dbg_msg("hdr_crc   %08x", be32_to_cpu(vid_hdr->hdr_crc));
-	dbg_msg("volume identifier header hexdump:");
+	printk(KERN_DEBUG "\thdr_crc   %08x\n", be32_to_cpu(vid_hdr->hdr_crc));
+	printk(KERN_DEBUG "Volume identifier header hexdump:\n");
+	print_hex_dump(KERN_DEBUG, "", DUMP_PREFIX_OFFSET, 32, 1,
+		       vid_hdr, UBI_VID_HDR_SIZE, 1);
 }
 
 /**
@@ -76,27 +82,27 @@ void ubi_dbg_dump_vid_hdr(const struct ubi_vid_hdr *vid_hdr)
  */
 void ubi_dbg_dump_vol_info(const struct ubi_volume *vol)
 {
-	dbg_msg("volume information dump:");
-	dbg_msg("vol_id          %d", vol->vol_id);
-	dbg_msg("reserved_pebs   %d", vol->reserved_pebs);
-	dbg_msg("alignment       %d", vol->alignment);
-	dbg_msg("data_pad        %d", vol->data_pad);
-	dbg_msg("vol_type        %d", vol->vol_type);
-	dbg_msg("name_len        %d", vol->name_len);
-	dbg_msg("usable_leb_size %d", vol->usable_leb_size);
-	dbg_msg("used_ebs        %d", vol->used_ebs);
-	dbg_msg("used_bytes      %lld", vol->used_bytes);
-	dbg_msg("last_eb_bytes   %d", vol->last_eb_bytes);
-	dbg_msg("corrupted       %d", vol->corrupted);
-	dbg_msg("upd_marker      %d", vol->upd_marker);
+	printk(KERN_DEBUG "Volume information dump:\n");
+	printk(KERN_DEBUG "\tvol_id          %d\n", vol->vol_id);
+	printk(KERN_DEBUG "\treserved_pebs   %d\n", vol->reserved_pebs);
+	printk(KERN_DEBUG "\talignment       %d\n", vol->alignment);
+	printk(KERN_DEBUG "\tdata_pad        %d\n", vol->data_pad);
+	printk(KERN_DEBUG "\tvol_type        %d\n", vol->vol_type);
+	printk(KERN_DEBUG "\tname_len        %d\n", vol->name_len);
+	printk(KERN_DEBUG "\tusable_leb_size %d\n", vol->usable_leb_size);
+	printk(KERN_DEBUG "\tused_ebs        %d\n", vol->used_ebs);
+	printk(KERN_DEBUG "\tused_bytes      %lld\n", vol->used_bytes);
+	printk(KERN_DEBUG "\tlast_eb_bytes   %d\n", vol->last_eb_bytes);
+	printk(KERN_DEBUG "\tcorrupted       %d\n", vol->corrupted);
+	printk(KERN_DEBUG "\tupd_marker      %d\n", vol->upd_marker);
 
 	if (vol->name_len <= UBI_VOL_NAME_MAX &&
 	    strnlen(vol->name, vol->name_len + 1) == vol->name_len) {
-		dbg_msg("name            %s", vol->name);
+		printk(KERN_DEBUG "\tname            %s\n", vol->name);
 	} else {
-		dbg_msg("the 1st 5 characters of the name: %c%c%c%c%c",
-			vol->name[0], vol->name[1], vol->name[2],
-			vol->name[3], vol->name[4]);
+		printk(KERN_DEBUG "\t1st 5 characters of name: %c%c%c%c%c\n",
+		       vol->name[0], vol->name[1], vol->name[2],
+		       vol->name[3], vol->name[4]);
 	}
 }
 
@@ -109,28 +115,29 @@ void ubi_dbg_dump_vtbl_record(const struct ubi_vtbl_record *r, int idx)
 {
 	int name_len = be16_to_cpu(r->name_len);
 
-	dbg_msg("volume table record %d dump:", idx);
-	dbg_msg("reserved_pebs   %d", be32_to_cpu(r->reserved_pebs));
-	dbg_msg("alignment       %d", be32_to_cpu(r->alignment));
-	dbg_msg("data_pad        %d", be32_to_cpu(r->data_pad));
-	dbg_msg("vol_type        %d", (int)r->vol_type);
-	dbg_msg("upd_marker      %d", (int)r->upd_marker);
-	dbg_msg("name_len        %d", name_len);
+	printk(KERN_DEBUG "Volume table record %d dump:\n", idx);
+	printk(KERN_DEBUG "\treserved_pebs   %d\n",
+	       be32_to_cpu(r->reserved_pebs));
+	printk(KERN_DEBUG "\talignment       %d\n", be32_to_cpu(r->alignment));
+	printk(KERN_DEBUG "\tdata_pad        %d\n", be32_to_cpu(r->data_pad));
+	printk(KERN_DEBUG "\tvol_type        %d\n", (int)r->vol_type);
+	printk(KERN_DEBUG "\tupd_marker      %d\n", (int)r->upd_marker);
+	printk(KERN_DEBUG "\tname_len        %d\n", name_len);
 
 	if (r->name[0] == '\0') {
-		dbg_msg("name            NULL");
+		printk(KERN_DEBUG "\tname            NULL\n");
 		return;
 	}
 
 	if (name_len <= UBI_VOL_NAME_MAX &&
 	    strnlen(&r->name[0], name_len + 1) == name_len) {
-		dbg_msg("name            %s", &r->name[0]);
+		printk(KERN_DEBUG "\tname            %s\n", &r->name[0]);
 	} else {
-		dbg_msg("1st 5 characters of the name: %c%c%c%c%c",
+		printk(KERN_DEBUG "\t1st 5 characters of name: %c%c%c%c%c\n",
 			r->name[0], r->name[1], r->name[2], r->name[3],
 			r->name[4]);
 	}
-	dbg_msg("crc             %#08x", be32_to_cpu(r->crc));
+	printk(KERN_DEBUG "\tcrc             %#08x\n", be32_to_cpu(r->crc));
 }
 
 /**
@@ -139,15 +146,15 @@ void ubi_dbg_dump_vtbl_record(const struct ubi_vtbl_record *r, int idx)
  */
 void ubi_dbg_dump_sv(const struct ubi_scan_volume *sv)
 {
-	dbg_msg("volume scanning information dump:");
-	dbg_msg("vol_id         %d", sv->vol_id);
-	dbg_msg("highest_lnum   %d", sv->highest_lnum);
-	dbg_msg("leb_count      %d", sv->leb_count);
-	dbg_msg("compat         %d", sv->compat);
-	dbg_msg("vol_type       %d", sv->vol_type);
-	dbg_msg("used_ebs       %d", sv->used_ebs);
-	dbg_msg("last_data_size %d", sv->last_data_size);
-	dbg_msg("data_pad       %d", sv->data_pad);
+	printk(KERN_DEBUG "Volume scanning information dump:\n");
+	printk(KERN_DEBUG "\tvol_id         %d\n", sv->vol_id);
+	printk(KERN_DEBUG "\thighest_lnum   %d\n", sv->highest_lnum);
+	printk(KERN_DEBUG "\tleb_count      %d\n", sv->leb_count);
+	printk(KERN_DEBUG "\tcompat         %d\n", sv->compat);
+	printk(KERN_DEBUG "\tvol_type       %d\n", sv->vol_type);
+	printk(KERN_DEBUG "\tused_ebs       %d\n", sv->used_ebs);
+	printk(KERN_DEBUG "\tlast_data_size %d\n", sv->last_data_size);
+	printk(KERN_DEBUG "\tdata_pad       %d\n", sv->data_pad);
 }
 
 /**
@@ -157,14 +164,13 @@ void ubi_dbg_dump_sv(const struct ubi_scan_volume *sv)
  */
 void ubi_dbg_dump_seb(const struct ubi_scan_leb *seb, int type)
 {
-	dbg_msg("eraseblock scanning information dump:");
-	dbg_msg("ec       %d", seb->ec);
-	dbg_msg("pnum     %d", seb->pnum);
+	printk(KERN_DEBUG "eraseblock scanning information dump:\n");
+	printk(KERN_DEBUG "\tec       %d\n", seb->ec);
+	printk(KERN_DEBUG "\tpnum     %d\n", seb->pnum);
 	if (type == 0) {
-		dbg_msg("lnum     %d", seb->lnum);
-		dbg_msg("scrub    %d", seb->scrub);
-		dbg_msg("sqnum    %llu", seb->sqnum);
-		dbg_msg("leb_ver  %u", seb->leb_ver);
+		printk(KERN_DEBUG "\tlnum     %d\n", seb->lnum);
+		printk(KERN_DEBUG "\tscrub    %d\n", seb->scrub);
+		printk(KERN_DEBUG "\tsqnum    %llu\n", seb->sqnum);
 	}
 }
 
@@ -176,16 +182,16 @@ void ubi_dbg_dump_mkvol_req(const struct ubi_mkvol_req *req)
 {
 	char nm[17];
 
-	dbg_msg("volume creation request dump:");
-	dbg_msg("vol_id    %d",   req->vol_id);
-	dbg_msg("alignment %d",   req->alignment);
-	dbg_msg("bytes     %lld", (long long)req->bytes);
-	dbg_msg("vol_type  %d",   req->vol_type);
-	dbg_msg("name_len  %d",   req->name_len);
+	printk(KERN_DEBUG "Volume creation request dump:\n");
+	printk(KERN_DEBUG "\tvol_id    %d\n",   req->vol_id);
+	printk(KERN_DEBUG "\talignment %d\n",   req->alignment);
+	printk(KERN_DEBUG "\tbytes     %lld\n", (long long)req->bytes);
+	printk(KERN_DEBUG "\tvol_type  %d\n",   req->vol_type);
+	printk(KERN_DEBUG "\tname_len  %d\n",   req->name_len);
 
 	memcpy(nm, req->name, 16);
 	nm[16] = 0;
-	dbg_msg("the 1st 16 characters of the name: %s", nm);
+	printk(KERN_DEBUG "\t1st 16 characters of name: %s\n", nm);
 }
 
-#endif /* CONFIG_MTD_UBI_DEBUG_MSG */
+#endif /* CONFIG_MTD_UBI_DEBUG */
diff --git a/drivers/mtd/ubi/debug.h b/drivers/mtd/ubi/debug.h
index 8ea99d8c9e1f..78e914d23ece 100644
--- a/drivers/mtd/ubi/debug.h
+++ b/drivers/mtd/ubi/debug.h
@@ -24,21 +24,16 @@
 #ifdef CONFIG_MTD_UBI_DEBUG
 #include <linux/random.h>
 
-#define ubi_assert(expr)  BUG_ON(!(expr))
 #define dbg_err(fmt, ...) ubi_err(fmt, ##__VA_ARGS__)
-#else
-#define ubi_assert(expr)  ({})
-#define dbg_err(fmt, ...) ({})
-#endif
 
-#ifdef CONFIG_MTD_UBI_DEBUG_DISABLE_BGT
-#define DBG_DISABLE_BGT 1
-#else
-#define DBG_DISABLE_BGT 0
-#endif
+#define ubi_assert(expr)  do {                                               \
+        if (unlikely(!(expr))) {                                             \
+                printk(KERN_CRIT "UBI assert failed in %s at %u (pid %d)\n", \
+                       __func__, __LINE__, current->pid);                    \
+                ubi_dbg_dump_stack();                                        \
+        }                                                                    \
+} while (0)
 
-#ifdef CONFIG_MTD_UBI_DEBUG_MSG
-/* Generic debugging message */
 #define dbg_msg(fmt, ...)                                    \
 	printk(KERN_DEBUG "UBI DBG (pid %d): %s: " fmt "\n", \
 	       current->pid, __func__, ##__VA_ARGS__)
@@ -61,36 +56,29 @@ void ubi_dbg_dump_sv(const struct ubi_scan_volume *sv);
 void ubi_dbg_dump_seb(const struct ubi_scan_leb *seb, int type);
 void ubi_dbg_dump_mkvol_req(const struct ubi_mkvol_req *req);
 
+#ifdef CONFIG_MTD_UBI_DEBUG_MSG
+/* General debugging messages */
+#define dbg_gen(fmt, ...) dbg_msg(fmt, ##__VA_ARGS__)
 #else
-
-#define dbg_msg(fmt, ...)    ({})
-#define ubi_dbg_dump_stack() ({})
-#define ubi_dbg_dump_ec_hdr(ec_hdr)      ({})
-#define ubi_dbg_dump_vid_hdr(vid_hdr)    ({})
-#define ubi_dbg_dump_vol_info(vol)       ({})
-#define ubi_dbg_dump_vtbl_record(r, idx) ({})
-#define ubi_dbg_dump_sv(sv)              ({})
-#define ubi_dbg_dump_seb(seb, type)      ({})
-#define ubi_dbg_dump_mkvol_req(req)      ({})
-
-#endif /* CONFIG_MTD_UBI_DEBUG_MSG */
+#define dbg_gen(fmt, ...) ({})
+#endif
 
 #ifdef CONFIG_MTD_UBI_DEBUG_MSG_EBA
-/* Messages from the eraseblock association unit */
+/* Messages from the eraseblock association sub-system */
 #define dbg_eba(fmt, ...) dbg_msg(fmt, ##__VA_ARGS__)
 #else
 #define dbg_eba(fmt, ...) ({})
 #endif
 
 #ifdef CONFIG_MTD_UBI_DEBUG_MSG_WL
-/* Messages from the wear-leveling unit */
+/* Messages from the wear-leveling sub-system */
 #define dbg_wl(fmt, ...) dbg_msg(fmt, ##__VA_ARGS__)
 #else
 #define dbg_wl(fmt, ...) ({})
 #endif
 
 #ifdef CONFIG_MTD_UBI_DEBUG_MSG_IO
-/* Messages from the input/output unit */
+/* Messages from the input/output sub-system */
 #define dbg_io(fmt, ...) dbg_msg(fmt, ##__VA_ARGS__)
 #else
 #define dbg_io(fmt, ...) ({})
@@ -105,6 +93,12 @@ void ubi_dbg_dump_mkvol_req(const struct ubi_mkvol_req *req);
 #define UBI_IO_DEBUG 0
 #endif
 
+#ifdef CONFIG_MTD_UBI_DEBUG_DISABLE_BGT
+#define DBG_DISABLE_BGT 1
+#else
+#define DBG_DISABLE_BGT 0
+#endif
+
 #ifdef CONFIG_MTD_UBI_DEBUG_EMULATE_BITFLIPS
 /**
  * ubi_dbg_is_bitflip - if it is time to emulate a bit-flip.
@@ -149,4 +143,30 @@ static inline int ubi_dbg_is_erase_failure(void)
 #define ubi_dbg_is_erase_failure() 0
 #endif
 
+#else
+
+#define ubi_assert(expr)                 ({})
+#define dbg_err(fmt, ...)                ({})
+#define dbg_msg(fmt, ...)                ({})
+#define dbg_gen(fmt, ...)                ({})
+#define dbg_eba(fmt, ...)                ({})
+#define dbg_wl(fmt, ...)                 ({})
+#define dbg_io(fmt, ...)                 ({})
+#define dbg_bld(fmt, ...)                ({})
+#define ubi_dbg_dump_stack()             ({})
+#define ubi_dbg_dump_ec_hdr(ec_hdr)      ({})
+#define ubi_dbg_dump_vid_hdr(vid_hdr)    ({})
+#define ubi_dbg_dump_vol_info(vol)       ({})
+#define ubi_dbg_dump_vtbl_record(r, idx) ({})
+#define ubi_dbg_dump_sv(sv)              ({})
+#define ubi_dbg_dump_seb(seb, type)      ({})
+#define ubi_dbg_dump_mkvol_req(req)      ({})
+
+#define UBI_IO_DEBUG               0
+#define DBG_DISABLE_BGT            0
+#define ubi_dbg_is_bitflip()       0
+#define ubi_dbg_is_write_failure() 0
+#define ubi_dbg_is_erase_failure() 0
+
+#endif /* !CONFIG_MTD_UBI_DEBUG */
 #endif /* !__UBI_DEBUG_H__ */
diff --git a/drivers/mtd/ubi/eba.c b/drivers/mtd/ubi/eba.c
index 7ce91ca742b1..e04bcf1dff87 100644
--- a/drivers/mtd/ubi/eba.c
+++ b/drivers/mtd/ubi/eba.c
@@ -19,20 +19,20 @@
  */
 
 /*
- * The UBI Eraseblock Association (EBA) unit.
+ * The UBI Eraseblock Association (EBA) sub-system.
  *
- * This unit is responsible for I/O to/from logical eraseblock.
+ * This sub-system is responsible for I/O to/from logical eraseblock.
  *
  * Although in this implementation the EBA table is fully kept and managed in
  * RAM, which assumes poor scalability, it might be (partially) maintained on
  * flash in future implementations.
  *
- * The EBA unit implements per-logical eraseblock locking. Before accessing a
- * logical eraseblock it is locked for reading or writing. The per-logical
- * eraseblock locking is implemented by means of the lock tree. The lock tree
- * is an RB-tree which refers all the currently locked logical eraseblocks. The
- * lock tree elements are &struct ubi_ltree_entry objects. They are indexed by
- * (@vol_id, @lnum) pairs.
+ * The EBA sub-system implements per-logical eraseblock locking. Before
+ * accessing a logical eraseblock it is locked for reading or writing. The
+ * per-logical eraseblock locking is implemented by means of the lock tree. The
+ * lock tree is an RB-tree which refers all the currently locked logical
+ * eraseblocks. The lock tree elements are &struct ubi_ltree_entry objects.
+ * They are indexed by (@vol_id, @lnum) pairs.
  *
  * EBA also maintains the global sequence counter which is incremented each
  * time a logical eraseblock is mapped to a physical eraseblock and it is
@@ -189,9 +189,7 @@ static struct ubi_ltree_entry *ltree_add_entry(struct ubi_device *ubi,
 	le->users += 1;
 	spin_unlock(&ubi->ltree_lock);
 
-	if (le_free)
-		kfree(le_free);
-
+	kfree(le_free);
 	return le;
 }
 
@@ -223,22 +221,18 @@ static int leb_read_lock(struct ubi_device *ubi, int vol_id, int lnum)
  */
 static void leb_read_unlock(struct ubi_device *ubi, int vol_id, int lnum)
 {
-	int free = 0;
 	struct ubi_ltree_entry *le;
 
 	spin_lock(&ubi->ltree_lock);
 	le = ltree_lookup(ubi, vol_id, lnum);
 	le->users -= 1;
 	ubi_assert(le->users >= 0);
+	up_read(&le->mutex);
 	if (le->users == 0) {
 		rb_erase(&le->rb, &ubi->ltree);
-		free = 1;
+		kfree(le);
 	}
 	spin_unlock(&ubi->ltree_lock);
-
-	up_read(&le->mutex);
-	if (free)
-		kfree(le);
 }
 
 /**
@@ -274,7 +268,6 @@ static int leb_write_lock(struct ubi_device *ubi, int vol_id, int lnum)
  */
 static int leb_write_trylock(struct ubi_device *ubi, int vol_id, int lnum)
 {
-	int free;
 	struct ubi_ltree_entry *le;
 
 	le = ltree_add_entry(ubi, vol_id, lnum);
@@ -289,12 +282,9 @@ static int leb_write_trylock(struct ubi_device *ubi, int vol_id, int lnum)
 	ubi_assert(le->users >= 0);
 	if (le->users == 0) {
 		rb_erase(&le->rb, &ubi->ltree);
-		free = 1;
-	} else
-		free = 0;
-	spin_unlock(&ubi->ltree_lock);
-	if (free)
 		kfree(le);
+	}
+	spin_unlock(&ubi->ltree_lock);
 
 	return 1;
 }
@@ -307,23 +297,18 @@ static int leb_write_trylock(struct ubi_device *ubi, int vol_id, int lnum)
  */
 static void leb_write_unlock(struct ubi_device *ubi, int vol_id, int lnum)
 {
-	int free;
 	struct ubi_ltree_entry *le;
 
 	spin_lock(&ubi->ltree_lock);
 	le = ltree_lookup(ubi, vol_id, lnum);
 	le->users -= 1;
 	ubi_assert(le->users >= 0);
+	up_write(&le->mutex);
 	if (le->users == 0) {
 		rb_erase(&le->rb, &ubi->ltree);
-		free = 1;
-	} else
-		free = 0;
-	spin_unlock(&ubi->ltree_lock);
-
-	up_write(&le->mutex);
-	if (free)
 		kfree(le);
+	}
+	spin_unlock(&ubi->ltree_lock);
 }
 
 /**
@@ -516,9 +501,8 @@ static int recover_peb(struct ubi_device *ubi, int pnum, int vol_id, int lnum,
 	struct ubi_vid_hdr *vid_hdr;
 
 	vid_hdr = ubi_zalloc_vid_hdr(ubi, GFP_NOFS);
-	if (!vid_hdr) {
+	if (!vid_hdr)
 		return -ENOMEM;
-	}
 
 	mutex_lock(&ubi->buf_mutex);
 
@@ -752,7 +736,7 @@ int ubi_eba_write_leb_st(struct ubi_device *ubi, struct ubi_volume *vol,
 		/* If this is the last LEB @len may be unaligned */
 		len = ALIGN(data_size, ubi->min_io_size);
 	else
-		ubi_assert(len % ubi->min_io_size == 0);
+		ubi_assert(!(len & (ubi->min_io_size - 1)));
 
 	vid_hdr = ubi_zalloc_vid_hdr(ubi, GFP_NOFS);
 	if (!vid_hdr)
@@ -919,7 +903,7 @@ retry:
 	}
 
 	if (vol->eba_tbl[lnum] >= 0) {
-		err = ubi_wl_put_peb(ubi, vol->eba_tbl[lnum], 1);
+		err = ubi_wl_put_peb(ubi, vol->eba_tbl[lnum], 0);
 		if (err)
 			goto out_leb_unlock;
 	}
@@ -1141,7 +1125,7 @@ out_unlock_leb:
 }
 
 /**
- * ubi_eba_init_scan - initialize the EBA unit using scanning information.
+ * ubi_eba_init_scan - initialize the EBA sub-system using scanning information.
  * @ubi: UBI device description object
  * @si: scanning information
  *
@@ -1156,7 +1140,7 @@ int ubi_eba_init_scan(struct ubi_device *ubi, struct ubi_scan_info *si)
 	struct ubi_scan_leb *seb;
 	struct rb_node *rb;
 
-	dbg_eba("initialize EBA unit");
+	dbg_eba("initialize EBA sub-system");
 
 	spin_lock_init(&ubi->ltree_lock);
 	mutex_init(&ubi->alc_mutex);
@@ -1222,7 +1206,7 @@ int ubi_eba_init_scan(struct ubi_device *ubi, struct ubi_scan_info *si)
 		ubi->rsvd_pebs  += ubi->beb_rsvd_pebs;
 	}
 
-	dbg_eba("EBA unit is initialized");
+	dbg_eba("EBA sub-system is initialized");
 	return 0;
 
 out_free:
@@ -1233,20 +1217,3 @@ out_free:
 	}
 	return err;
 }
-
-/**
- * ubi_eba_close - close EBA unit.
- * @ubi: UBI device description object
- */
-void ubi_eba_close(const struct ubi_device *ubi)
-{
-	int i, num_volumes = ubi->vtbl_slots + UBI_INT_VOL_COUNT;
-
-	dbg_eba("close EBA unit");
-
-	for (i = 0; i < num_volumes; i++) {
-		if (!ubi->volumes[i])
-			continue;
-		kfree(ubi->volumes[i]->eba_tbl);
-	}
-}
diff --git a/drivers/mtd/ubi/gluebi.c b/drivers/mtd/ubi/gluebi.c
index e909b390069a..605812bb0b1a 100644
--- a/drivers/mtd/ubi/gluebi.c
+++ b/drivers/mtd/ubi/gluebi.c
@@ -111,7 +111,7 @@ static int gluebi_read(struct mtd_info *mtd, loff_t from, size_t len,
 	struct ubi_device *ubi;
 	uint64_t tmp = from;
 
-	dbg_msg("read %zd bytes from offset %lld", len, from);
+	dbg_gen("read %zd bytes from offset %lld", len, from);
 
 	if (len < 0 || from < 0 || from + len > mtd->size)
 		return -EINVAL;
@@ -162,7 +162,7 @@ static int gluebi_write(struct mtd_info *mtd, loff_t to, size_t len,
 	struct ubi_device *ubi;
 	uint64_t tmp = to;
 
-	dbg_msg("write %zd bytes to offset %lld", len, to);
+	dbg_gen("write %zd bytes to offset %lld", len, to);
 
 	if (len < 0 || to < 0 || len + to > mtd->size)
 		return -EINVAL;
@@ -215,7 +215,7 @@ static int gluebi_erase(struct mtd_info *mtd, struct erase_info *instr)
 	struct ubi_volume *vol;
 	struct ubi_device *ubi;
 
-	dbg_msg("erase %u bytes at offset %u", instr->len, instr->addr);
+	dbg_gen("erase %u bytes at offset %u", instr->len, instr->addr);
 
 	if (instr->addr < 0 || instr->addr > mtd->size - mtd->erasesize)
 		return -EINVAL;
@@ -249,8 +249,8 @@ static int gluebi_erase(struct mtd_info *mtd, struct erase_info *instr)
 	if (err)
 		goto out_err;
 
-        instr->state = MTD_ERASE_DONE;
-        mtd_erase_callback(instr);
+	instr->state = MTD_ERASE_DONE;
+	mtd_erase_callback(instr);
 	return 0;
 
 out_err:
@@ -299,12 +299,12 @@ int ubi_create_gluebi(struct ubi_device *ubi, struct ubi_volume *vol)
 		mtd->size = vol->used_bytes;
 
 	if (add_mtd_device(mtd)) {
-		ubi_err("cannot not add MTD device\n");
+		ubi_err("cannot not add MTD device");
 		kfree(mtd->name);
 		return -ENFILE;
 	}
 
-	dbg_msg("added mtd%d (\"%s\"), size %u, EB size %u",
+	dbg_gen("added mtd%d (\"%s\"), size %u, EB size %u",
 		mtd->index, mtd->name, mtd->size, mtd->erasesize);
 	return 0;
 }
@@ -322,7 +322,7 @@ int ubi_destroy_gluebi(struct ubi_volume *vol)
 	int err;
 	struct mtd_info *mtd = &vol->gluebi_mtd;
 
-	dbg_msg("remove mtd%d", mtd->index);
+	dbg_gen("remove mtd%d", mtd->index);
 	err = del_mtd_device(mtd);
 	if (err)
 		return err;
diff --git a/drivers/mtd/ubi/io.c b/drivers/mtd/ubi/io.c
index 4ac11df7b048..2fb64be44f1b 100644
--- a/drivers/mtd/ubi/io.c
+++ b/drivers/mtd/ubi/io.c
@@ -20,15 +20,15 @@
  */
 
 /*
- * UBI input/output unit.
+ * UBI input/output sub-system.
  *
- * This unit provides a uniform way to work with all kinds of the underlying
- * MTD devices. It also implements handy functions for reading and writing UBI
- * headers.
+ * This sub-system provides a uniform way to work with all kinds of the
+ * underlying MTD devices. It also implements handy functions for reading and
+ * writing UBI headers.
  *
  * We are trying to have a paranoid mindset and not to trust to what we read
- * from the flash media in order to be more secure and robust. So this unit
- * validates every single header it reads from the flash media.
+ * from the flash media in order to be more secure and robust. So this
+ * sub-system validates every single header it reads from the flash media.
  *
  * Some words about how the eraseblock headers are stored.
  *
@@ -79,11 +79,11 @@
  * 512-byte chunks, we have to allocate one more buffer and copy our VID header
  * to offset 448 of this buffer.
  *
- * The I/O unit does the following trick in order to avoid this extra copy.
- * It always allocates a @ubi->vid_hdr_alsize bytes buffer for the VID header
- * and returns a pointer to offset @ubi->vid_hdr_shift of this buffer. When the
- * VID header is being written out, it shifts the VID header pointer back and
- * writes the whole sub-page.
+ * The I/O sub-system does the following trick in order to avoid this extra
+ * copy. It always allocates a @ubi->vid_hdr_alsize bytes buffer for the VID
+ * header and returns a pointer to offset @ubi->vid_hdr_shift of this buffer.
+ * When the VID header is being written out, it shifts the VID header pointer
+ * back and writes the whole sub-page.
  */
 
 #include <linux/crc32.h>
@@ -156,15 +156,19 @@ retry:
 			/*
 			 * -EUCLEAN is reported if there was a bit-flip which
 			 * was corrected, so this is harmless.
+			 *
+			 * We do not report about it here unless debugging is
+			 * enabled. A corresponding message will be printed
+			 * later, when it is has been scrubbed.
 			 */
-			ubi_msg("fixable bit-flip detected at PEB %d", pnum);
+			dbg_msg("fixable bit-flip detected at PEB %d", pnum);
 			ubi_assert(len == read);
 			return UBI_IO_BITFLIPS;
 		}
 
 		if (read != len && retries++ < UBI_IO_RETRIES) {
-			dbg_io("error %d while reading %d bytes from PEB %d:%d, "
-			       "read only %zd bytes, retry",
+			dbg_io("error %d while reading %d bytes from PEB %d:%d,"
+			       " read only %zd bytes, retry",
 			       err, len, pnum, offset, read);
 			yield();
 			goto retry;
@@ -187,7 +191,7 @@ retry:
 		ubi_assert(len == read);
 
 		if (ubi_dbg_is_bitflip()) {
-			dbg_msg("bit-flip (emulated)");
+			dbg_gen("bit-flip (emulated)");
 			err = UBI_IO_BITFLIPS;
 		}
 	}
@@ -391,6 +395,7 @@ static int torture_peb(struct ubi_device *ubi, int pnum)
 {
 	int err, i, patt_count;
 
+	ubi_msg("run torture test for PEB %d", pnum);
 	patt_count = ARRAY_SIZE(patterns);
 	ubi_assert(patt_count > 0);
 
@@ -434,6 +439,7 @@ static int torture_peb(struct ubi_device *ubi, int pnum)
 	}
 
 	err = patt_count;
+	ubi_msg("PEB %d passed torture test, do not mark it a bad", pnum);
 
 out:
 	mutex_unlock(&ubi->buf_mutex);
@@ -699,8 +705,8 @@ int ubi_io_read_ec_hdr(struct ubi_device *ubi, int pnum,
 
 	if (hdr_crc != crc) {
 		if (verbose) {
-			ubi_warn("bad EC header CRC at PEB %d, calculated %#08x,"
-				 " read %#08x", pnum, crc, hdr_crc);
+			ubi_warn("bad EC header CRC at PEB %d, calculated "
+				 "%#08x, read %#08x", pnum, crc, hdr_crc);
 			ubi_dbg_dump_ec_hdr(ec_hdr);
 		}
 		return UBI_IO_BAD_EC_HDR;
@@ -1095,8 +1101,7 @@ fail:
 }
 
 /**
- * paranoid_check_peb_ec_hdr - check that the erase counter header of a
- * physical eraseblock is in-place and is all right.
+ * paranoid_check_peb_ec_hdr - check erase counter header.
  * @ubi: UBI device description object
  * @pnum: the physical eraseblock number to check
  *
@@ -1174,8 +1179,7 @@ fail:
 }
 
 /**
- * paranoid_check_peb_vid_hdr - check that the volume identifier header of a
- * physical eraseblock is in-place and is all right.
+ * paranoid_check_peb_vid_hdr - check volume identifier header.
  * @ubi: UBI device description object
  * @pnum: the physical eraseblock number to check
  *
@@ -1256,7 +1260,7 @@ static int paranoid_check_all_ff(struct ubi_device *ubi, int pnum, int offset,
 
 fail:
 	ubi_err("paranoid check failed for PEB %d", pnum);
-	dbg_msg("hex dump of the %d-%d region", offset, offset + len);
+	ubi_msg("hex dump of the %d-%d region", offset, offset + len);
 	print_hex_dump(KERN_DEBUG, "", DUMP_PREFIX_OFFSET, 32, 1,
 		       ubi->dbg_peb_buf, len, 1);
 	err = 1;
diff --git a/drivers/mtd/ubi/kapi.c b/drivers/mtd/ubi/kapi.c
index a70d58823f8d..5d9bcf109c13 100644
--- a/drivers/mtd/ubi/kapi.c
+++ b/drivers/mtd/ubi/kapi.c
@@ -106,7 +106,7 @@ struct ubi_volume_desc *ubi_open_volume(int ubi_num, int vol_id, int mode)
 	struct ubi_device *ubi;
 	struct ubi_volume *vol;
 
-	dbg_msg("open device %d volume %d, mode %d", ubi_num, vol_id, mode);
+	dbg_gen("open device %d volume %d, mode %d", ubi_num, vol_id, mode);
 
 	if (ubi_num < 0 || ubi_num >= UBI_MAX_DEVICES)
 		return ERR_PTR(-EINVAL);
@@ -215,7 +215,7 @@ struct ubi_volume_desc *ubi_open_volume_nm(int ubi_num, const char *name,
 	struct ubi_device *ubi;
 	struct ubi_volume_desc *ret;
 
-	dbg_msg("open volume %s, mode %d", name, mode);
+	dbg_gen("open volume %s, mode %d", name, mode);
 
 	if (!name)
 		return ERR_PTR(-EINVAL);
@@ -266,7 +266,7 @@ void ubi_close_volume(struct ubi_volume_desc *desc)
 	struct ubi_volume *vol = desc->vol;
 	struct ubi_device *ubi = vol->ubi;
 
-	dbg_msg("close volume %d, mode %d", vol->vol_id, desc->mode);
+	dbg_gen("close volume %d, mode %d", vol->vol_id, desc->mode);
 
 	spin_lock(&ubi->volumes_lock);
 	switch (desc->mode) {
@@ -323,7 +323,7 @@ int ubi_leb_read(struct ubi_volume_desc *desc, int lnum, char *buf, int offset,
 	struct ubi_device *ubi = vol->ubi;
 	int err, vol_id = vol->vol_id;
 
-	dbg_msg("read %d bytes from LEB %d:%d:%d", len, vol_id, lnum, offset);
+	dbg_gen("read %d bytes from LEB %d:%d:%d", len, vol_id, lnum, offset);
 
 	if (vol_id < 0 || vol_id >= ubi->vtbl_slots || lnum < 0 ||
 	    lnum >= vol->used_ebs || offset < 0 || len < 0 ||
@@ -388,7 +388,7 @@ int ubi_leb_write(struct ubi_volume_desc *desc, int lnum, const void *buf,
 	struct ubi_device *ubi = vol->ubi;
 	int vol_id = vol->vol_id;
 
-	dbg_msg("write %d bytes to LEB %d:%d:%d", len, vol_id, lnum, offset);
+	dbg_gen("write %d bytes to LEB %d:%d:%d", len, vol_id, lnum, offset);
 
 	if (vol_id < 0 || vol_id >= ubi->vtbl_slots)
 		return -EINVAL;
@@ -397,8 +397,8 @@ int ubi_leb_write(struct ubi_volume_desc *desc, int lnum, const void *buf,
 		return -EROFS;
 
 	if (lnum < 0 || lnum >= vol->reserved_pebs || offset < 0 || len < 0 ||
-	    offset + len > vol->usable_leb_size || offset % ubi->min_io_size ||
-	    len % ubi->min_io_size)
+	    offset + len > vol->usable_leb_size ||
+	    offset & (ubi->min_io_size - 1) || len & (ubi->min_io_size - 1))
 		return -EINVAL;
 
 	if (dtype != UBI_LONGTERM && dtype != UBI_SHORTTERM &&
@@ -438,7 +438,7 @@ int ubi_leb_change(struct ubi_volume_desc *desc, int lnum, const void *buf,
 	struct ubi_device *ubi = vol->ubi;
 	int vol_id = vol->vol_id;
 
-	dbg_msg("atomically write %d bytes to LEB %d:%d", len, vol_id, lnum);
+	dbg_gen("atomically write %d bytes to LEB %d:%d", len, vol_id, lnum);
 
 	if (vol_id < 0 || vol_id >= ubi->vtbl_slots)
 		return -EINVAL;
@@ -447,7 +447,7 @@ int ubi_leb_change(struct ubi_volume_desc *desc, int lnum, const void *buf,
 		return -EROFS;
 
 	if (lnum < 0 || lnum >= vol->reserved_pebs || len < 0 ||
-	    len > vol->usable_leb_size || len % ubi->min_io_size)
+	    len > vol->usable_leb_size || len & (ubi->min_io_size - 1))
 		return -EINVAL;
 
 	if (dtype != UBI_LONGTERM && dtype != UBI_SHORTTERM &&
@@ -482,7 +482,7 @@ int ubi_leb_erase(struct ubi_volume_desc *desc, int lnum)
 	struct ubi_device *ubi = vol->ubi;
 	int err;
 
-	dbg_msg("erase LEB %d:%d", vol->vol_id, lnum);
+	dbg_gen("erase LEB %d:%d", vol->vol_id, lnum);
 
 	if (desc->mode == UBI_READONLY || vol->vol_type == UBI_STATIC_VOLUME)
 		return -EROFS;
@@ -542,7 +542,7 @@ int ubi_leb_unmap(struct ubi_volume_desc *desc, int lnum)
 	struct ubi_volume *vol = desc->vol;
 	struct ubi_device *ubi = vol->ubi;
 
-	dbg_msg("unmap LEB %d:%d", vol->vol_id, lnum);
+	dbg_gen("unmap LEB %d:%d", vol->vol_id, lnum);
 
 	if (desc->mode == UBI_READONLY || vol->vol_type == UBI_STATIC_VOLUME)
 		return -EROFS;
@@ -579,7 +579,7 @@ int ubi_leb_map(struct ubi_volume_desc *desc, int lnum, int dtype)
 	struct ubi_volume *vol = desc->vol;
 	struct ubi_device *ubi = vol->ubi;
 
-	dbg_msg("unmap LEB %d:%d", vol->vol_id, lnum);
+	dbg_gen("unmap LEB %d:%d", vol->vol_id, lnum);
 
 	if (desc->mode == UBI_READONLY || vol->vol_type == UBI_STATIC_VOLUME)
 		return -EROFS;
@@ -621,7 +621,7 @@ int ubi_is_mapped(struct ubi_volume_desc *desc, int lnum)
 {
 	struct ubi_volume *vol = desc->vol;
 
-	dbg_msg("test LEB %d:%d", vol->vol_id, lnum);
+	dbg_gen("test LEB %d:%d", vol->vol_id, lnum);
 
 	if (lnum < 0 || lnum >= vol->reserved_pebs)
 		return -EINVAL;
@@ -632,3 +632,27 @@ int ubi_is_mapped(struct ubi_volume_desc *desc, int lnum)
 	return vol->eba_tbl[lnum] >= 0;
 }
 EXPORT_SYMBOL_GPL(ubi_is_mapped);
+
+/**
+ * ubi_sync - synchronize UBI device buffers.
+ * @ubi_num: UBI device to synchronize
+ *
+ * The underlying MTD device may cache data in hardware or in software. This
+ * function ensures the caches are flushed. Returns zero in case of success and
+ * a negative error code in case of failure.
+ */
+int ubi_sync(int ubi_num)
+{
+	struct ubi_device *ubi;
+
+	ubi = ubi_get_device(ubi_num);
+	if (!ubi)
+		return -ENODEV;
+
+	if (ubi->mtd->sync)
+		ubi->mtd->sync(ubi->mtd);
+
+	ubi_put_device(ubi);
+	return 0;
+}
+EXPORT_SYMBOL_GPL(ubi_sync);
diff --git a/drivers/mtd/ubi/misc.c b/drivers/mtd/ubi/misc.c
index 93e052812012..22ad31402945 100644
--- a/drivers/mtd/ubi/misc.c
+++ b/drivers/mtd/ubi/misc.c
@@ -37,7 +37,7 @@ int ubi_calc_data_len(const struct ubi_device *ubi, const void *buf,
 {
 	int i;
 
-	ubi_assert(length % ubi->min_io_size == 0);
+	ubi_assert(!(length & (ubi->min_io_size - 1)));
 
 	for (i = length - 1; i >= 0; i--)
 		if (((const uint8_t *)buf)[i] != 0xFF)
diff --git a/drivers/mtd/ubi/scan.c b/drivers/mtd/ubi/scan.c
index 96d410e106ab..967bb4406df9 100644
--- a/drivers/mtd/ubi/scan.c
+++ b/drivers/mtd/ubi/scan.c
@@ -19,9 +19,9 @@
  */
 
 /*
- * UBI scanning unit.
+ * UBI scanning sub-system.
  *
- * This unit is responsible for scanning the flash media, checking UBI
+ * This sub-system is responsible for scanning the flash media, checking UBI
  * headers and providing complete information about the UBI flash image.
  *
  * The scanning information is represented by a &struct ubi_scan_info' object.
@@ -93,8 +93,7 @@ static int add_to_list(struct ubi_scan_info *si, int pnum, int ec,
 }
 
 /**
- * validate_vid_hdr - check that volume identifier header is correct and
- * consistent.
+ * validate_vid_hdr - check volume identifier header.
  * @vid_hdr: the volume identifier header to check
  * @sv: information about the volume this logical eraseblock belongs to
  * @pnum: physical eraseblock number the VID header came from
@@ -103,7 +102,7 @@ static int add_to_list(struct ubi_scan_info *si, int pnum, int ec,
  * non-zero if an inconsistency was found and zero if not.
  *
  * Note, UBI does sanity check of everything it reads from the flash media.
- * Most of the checks are done in the I/O unit. Here we check that the
+ * Most of the checks are done in the I/O sub-system. Here we check that the
  * information in the VID header is consistent to the information in other VID
  * headers of the same volume.
  */
@@ -247,45 +246,21 @@ static int compare_lebs(struct ubi_device *ubi, const struct ubi_scan_leb *seb,
 	struct ubi_vid_hdr *vh = NULL;
 	unsigned long long sqnum2 = be64_to_cpu(vid_hdr->sqnum);
 
-	if (seb->sqnum == 0 && sqnum2 == 0) {
-		long long abs, v1 = seb->leb_ver, v2 = be32_to_cpu(vid_hdr->leb_ver);
-
+	if (sqnum2 == seb->sqnum) {
 		/*
-		 * UBI constantly increases the logical eraseblock version
-		 * number and it can overflow. Thus, we have to bear in mind
-		 * that versions that are close to %0xFFFFFFFF are less then
-		 * versions that are close to %0.
-		 *
-		 * The UBI WL unit guarantees that the number of pending tasks
-		 * is not greater then %0x7FFFFFFF. So, if the difference
-		 * between any two versions is greater or equivalent to
-		 * %0x7FFFFFFF, there was an overflow and the logical
-		 * eraseblock with lower version is actually newer then the one
-		 * with higher version.
-		 *
-		 * FIXME: but this is anyway obsolete and will be removed at
-		 * some point.
+		 * This must be a really ancient UBI image which has been
+		 * created before sequence numbers support has been added. At
+		 * that times we used 32-bit LEB versions stored in logical
+		 * eraseblocks. That was before UBI got into mainline. We do not
+		 * support these images anymore. Well, those images will work
+		 * still work, but only if no unclean reboots happened.
 		 */
-		dbg_bld("using old crappy leb_ver stuff");
-
-		if (v1 == v2) {
-			ubi_err("PEB %d and PEB %d have the same version %lld",
-				seb->pnum, pnum, v1);
-			return -EINVAL;
-		}
-
-		abs = v1 - v2;
-		if (abs < 0)
-			abs = -abs;
+		ubi_err("unsupported on-flash UBI format\n");
+		return -EINVAL;
+	}
 
-		if (abs < 0x7FFFFFFF)
-			/* Non-overflow situation */
-			second_is_newer = (v2 > v1);
-		else
-			second_is_newer = (v2 < v1);
-	} else
-		/* Obviously the LEB with lower sequence counter is older */
-		second_is_newer = sqnum2 > seb->sqnum;
+	/* Obviously the LEB with lower sequence counter is older */
+	second_is_newer = !!(sqnum2 > seb->sqnum);
 
 	/*
 	 * Now we know which copy is newer. If the copy flag of the PEB with
@@ -293,7 +268,7 @@ static int compare_lebs(struct ubi_device *ubi, const struct ubi_scan_leb *seb,
 	 * check data CRC. For the second PEB we already have the VID header,
 	 * for the first one - we'll need to re-read it from flash.
 	 *
-	 * FIXME: this may be optimized so that we wouldn't read twice.
+	 * Note: this may be optimized so that we wouldn't read twice.
 	 */
 
 	if (second_is_newer) {
@@ -379,8 +354,7 @@ out_free_vidh:
 }
 
 /**
- * ubi_scan_add_used - add information about a physical eraseblock to the
- * scanning information.
+ * ubi_scan_add_used - add physical eraseblock to the scanning information.
  * @ubi: UBI device description object
  * @si: scanning information
  * @pnum: the physical eraseblock number
@@ -400,7 +374,6 @@ int ubi_scan_add_used(struct ubi_device *ubi, struct ubi_scan_info *si,
 		      int bitflips)
 {
 	int err, vol_id, lnum;
-	uint32_t leb_ver;
 	unsigned long long sqnum;
 	struct ubi_scan_volume *sv;
 	struct ubi_scan_leb *seb;
@@ -409,10 +382,9 @@ int ubi_scan_add_used(struct ubi_device *ubi, struct ubi_scan_info *si,
 	vol_id = be32_to_cpu(vid_hdr->vol_id);
 	lnum = be32_to_cpu(vid_hdr->lnum);
 	sqnum = be64_to_cpu(vid_hdr->sqnum);
-	leb_ver = be32_to_cpu(vid_hdr->leb_ver);
 
-	dbg_bld("PEB %d, LEB %d:%d, EC %d, sqnum %llu, ver %u, bitflips %d",
-		pnum, vol_id, lnum, ec, sqnum, leb_ver, bitflips);
+	dbg_bld("PEB %d, LEB %d:%d, EC %d, sqnum %llu, bitflips %d",
+		pnum, vol_id, lnum, ec, sqnum, bitflips);
 
 	sv = add_volume(si, vol_id, pnum, vid_hdr);
 	if (IS_ERR(sv) < 0)
@@ -445,25 +417,20 @@ int ubi_scan_add_used(struct ubi_device *ubi, struct ubi_scan_info *si,
 		 */
 
 		dbg_bld("this LEB already exists: PEB %d, sqnum %llu, "
-			"LEB ver %u, EC %d", seb->pnum, seb->sqnum,
-			seb->leb_ver, seb->ec);
-
-		/*
-		 * Make sure that the logical eraseblocks have different
-		 * versions. Otherwise the image is bad.
-		 */
-		if (seb->leb_ver == leb_ver && leb_ver != 0) {
-			ubi_err("two LEBs with same version %u", leb_ver);
-			ubi_dbg_dump_seb(seb, 0);
-			ubi_dbg_dump_vid_hdr(vid_hdr);
-			return -EINVAL;
-		}
+			"EC %d", seb->pnum, seb->sqnum, seb->ec);
 
 		/*
 		 * Make sure that the logical eraseblocks have different
 		 * sequence numbers. Otherwise the image is bad.
 		 *
-		 * FIXME: remove 'sqnum != 0' check when leb_ver is removed.
+		 * However, if the sequence number is zero, we assume it must
+		 * be an ancient UBI image from the era when UBI did not have
+		 * sequence numbers. We still can attach these images, unless
+		 * there is a need to distinguish between old and new
+		 * eraseblocks, in which case we'll refuse the image in
+		 * 'compare_lebs()'. In other words, we attach old clean
+		 * images, but refuse attaching old images with duplicated
+		 * logical eraseblocks because there was an unclean reboot.
 		 */
 		if (seb->sqnum == sqnum && sqnum != 0) {
 			ubi_err("two LEBs with same sequence number %llu",
@@ -503,7 +470,6 @@ int ubi_scan_add_used(struct ubi_device *ubi, struct ubi_scan_info *si,
 			seb->pnum = pnum;
 			seb->scrub = ((cmp_res & 2) || bitflips);
 			seb->sqnum = sqnum;
-			seb->leb_ver = leb_ver;
 
 			if (sv->highest_lnum == lnum)
 				sv->last_data_size =
@@ -540,7 +506,6 @@ int ubi_scan_add_used(struct ubi_device *ubi, struct ubi_scan_info *si,
 	seb->lnum = lnum;
 	seb->sqnum = sqnum;
 	seb->scrub = bitflips;
-	seb->leb_ver = leb_ver;
 
 	if (sv->highest_lnum <= lnum) {
 		sv->highest_lnum = lnum;
@@ -554,8 +519,7 @@ int ubi_scan_add_used(struct ubi_device *ubi, struct ubi_scan_info *si,
 }
 
 /**
- * ubi_scan_find_sv - find information about a particular volume in the
- * scanning information.
+ * ubi_scan_find_sv - find volume in the scanning information.
  * @si: scanning information
  * @vol_id: the requested volume ID
  *
@@ -584,8 +548,7 @@ struct ubi_scan_volume *ubi_scan_find_sv(const struct ubi_scan_info *si,
 }
 
 /**
- * ubi_scan_find_seb - find information about a particular logical
- * eraseblock in the volume scanning information.
+ * ubi_scan_find_seb - find LEB in the volume scanning information.
  * @sv: a pointer to the volume scanning information
  * @lnum: the requested logical eraseblock
  *
@@ -645,9 +608,9 @@ void ubi_scan_rm_volume(struct ubi_scan_info *si, struct ubi_scan_volume *sv)
  *
  * This function erases physical eraseblock 'pnum', and writes the erase
  * counter header to it. This function should only be used on UBI device
- * initialization stages, when the EBA unit had not been yet initialized. This
- * function returns zero in case of success and a negative error code in case
- * of failure.
+ * initialization stages, when the EBA sub-system had not been yet initialized.
+ * This function returns zero in case of success and a negative error code in
+ * case of failure.
  */
 int ubi_scan_erase_peb(struct ubi_device *ubi, const struct ubi_scan_info *si,
 		       int pnum, int ec)
@@ -687,9 +650,10 @@ out_free:
  * @si: scanning information
  *
  * This function returns a free physical eraseblock. It is supposed to be
- * called on the UBI initialization stages when the wear-leveling unit is not
- * initialized yet. This function picks a physical eraseblocks from one of the
- * lists, writes the EC header if it is needed, and removes it from the list.
+ * called on the UBI initialization stages when the wear-leveling sub-system is
+ * not initialized yet. This function picks a physical eraseblocks from one of
+ * the lists, writes the EC header if it is needed, and removes it from the
+ * list.
  *
  * This function returns scanning physical eraseblock information in case of
  * success and an error code in case of failure.
@@ -742,8 +706,7 @@ struct ubi_scan_leb *ubi_scan_get_free_peb(struct ubi_device *ubi,
 }
 
 /**
- * process_eb - read UBI headers, check them and add corresponding data
- * to the scanning information.
+ * process_eb - read, check UBI headers, and add them to scanning information.
  * @ubi: UBI device description object
  * @si: scanning information
  * @pnum: the physical eraseblock number
@@ -751,7 +714,8 @@ struct ubi_scan_leb *ubi_scan_get_free_peb(struct ubi_device *ubi,
  * This function returns a zero if the physical eraseblock was successfully
  * handled and a negative error code in case of failure.
  */
-static int process_eb(struct ubi_device *ubi, struct ubi_scan_info *si, int pnum)
+static int process_eb(struct ubi_device *ubi, struct ubi_scan_info *si,
+		      int pnum)
 {
 	long long uninitialized_var(ec);
 	int err, bitflips = 0, vol_id, ec_corr = 0;
@@ -764,8 +728,9 @@ static int process_eb(struct ubi_device *ubi, struct ubi_scan_info *si, int pnum
 		return err;
 	else if (err) {
 		/*
-		 * FIXME: this is actually duty of the I/O unit to initialize
-		 * this, but MTD does not provide enough information.
+		 * FIXME: this is actually duty of the I/O sub-system to
+		 * initialize this, but MTD does not provide enough
+		 * information.
 		 */
 		si->bad_peb_count += 1;
 		return 0;
@@ -930,7 +895,7 @@ struct ubi_scan_info *ubi_scan(struct ubi_device *ubi)
 	for (pnum = 0; pnum < ubi->peb_count; pnum++) {
 		cond_resched();
 
-		dbg_msg("process PEB %d", pnum);
+		dbg_gen("process PEB %d", pnum);
 		err = process_eb(ubi, si, pnum);
 		if (err < 0)
 			goto out_vidh;
@@ -1079,8 +1044,7 @@ void ubi_scan_destroy_si(struct ubi_scan_info *si)
 #ifdef CONFIG_MTD_UBI_DEBUG_PARANOID
 
 /**
- * paranoid_check_si - check if the scanning information is correct and
- * consistent.
+ * paranoid_check_si - check the scanning information.
  * @ubi: UBI device description object
  * @si: scanning information
  *
@@ -1265,11 +1229,6 @@ static int paranoid_check_si(struct ubi_device *ubi, struct ubi_scan_info *si)
 				ubi_err("bad data_pad %d", sv->data_pad);
 				goto bad_vid_hdr;
 			}
-
-			if (seb->leb_ver != be32_to_cpu(vidh->leb_ver)) {
-				ubi_err("bad leb_ver %u", seb->leb_ver);
-				goto bad_vid_hdr;
-			}
 		}
 
 		if (!last_seb)
@@ -1299,8 +1258,7 @@ static int paranoid_check_si(struct ubi_device *ubi, struct ubi_scan_info *si)
 		if (err < 0) {
 			kfree(buf);
 			return err;
-		}
-		else if (err)
+		} else if (err)
 			buf[pnum] = 1;
 	}
 
diff --git a/drivers/mtd/ubi/scan.h b/drivers/mtd/ubi/scan.h
index 966b9b682a42..61df208e2f20 100644
--- a/drivers/mtd/ubi/scan.h
+++ b/drivers/mtd/ubi/scan.h
@@ -34,7 +34,6 @@
  * @u: unions RB-tree or @list links
  * @u.rb: link in the per-volume RB-tree of &struct ubi_scan_leb objects
  * @u.list: link in one of the eraseblock lists
- * @leb_ver: logical eraseblock version (obsolete)
  *
  * One object of this type is allocated for each physical eraseblock during
  * scanning.
@@ -49,7 +48,6 @@ struct ubi_scan_leb {
 		struct rb_node rb;
 		struct list_head list;
 	} u;
-	uint32_t leb_ver;
 };
 
 /**
@@ -59,16 +57,16 @@ struct ubi_scan_leb {
  * @leb_count: number of logical eraseblocks in this volume
  * @vol_type: volume type
  * @used_ebs: number of used logical eraseblocks in this volume (only for
- * static volumes)
+ *            static volumes)
  * @last_data_size: amount of data in the last logical eraseblock of this
- * volume (always equivalent to the usable logical eraseblock size in case of
- * dynamic volumes)
+ *                  volume (always equivalent to the usable logical eraseblock
+ *                  size in case of dynamic volumes)
  * @data_pad: how many bytes at the end of logical eraseblocks of this volume
- * are not used (due to volume alignment)
+ *            are not used (due to volume alignment)
  * @compat: compatibility flags of this volume
  * @rb: link in the volume RB-tree
  * @root: root of the RB-tree containing all the eraseblock belonging to this
- * volume (&struct ubi_scan_leb objects)
+ *        volume (&struct ubi_scan_leb objects)
  *
  * One object of this type is allocated for each volume during scanning.
  */
@@ -92,8 +90,8 @@ struct ubi_scan_volume {
  * @free: list of free physical eraseblocks
  * @erase: list of physical eraseblocks which have to be erased
  * @alien: list of physical eraseblocks which should not be used by UBI (e.g.,
+ *         those belonging to "preserve"-compatible internal volumes)
  * @bad_peb_count: count of bad physical eraseblocks
- * those belonging to "preserve"-compatible internal volumes)
  * @vols_found: number of volumes found during scanning
  * @highest_vol_id: highest volume ID
  * @alien_peb_count: count of physical eraseblocks in the @alien list
@@ -106,8 +104,8 @@ struct ubi_scan_volume {
  * @ec_count: a temporary variable used when calculating @mean_ec
  *
  * This data structure contains the result of scanning and may be used by other
- * UBI units to build final UBI data structures, further error-recovery and so
- * on.
+ * UBI sub-systems to build final UBI data structures, further error-recovery
+ * and so on.
  */
 struct ubi_scan_info {
 	struct rb_root volumes;
@@ -132,8 +130,7 @@ struct ubi_device;
 struct ubi_vid_hdr;
 
 /*
- * ubi_scan_move_to_list - move a physical eraseblock from the volume tree to a
- * list.
+ * ubi_scan_move_to_list - move a PEB from the volume tree to a list.
  *
  * @sv: volume scanning information
  * @seb: scanning eraseblock infprmation
diff --git a/drivers/mtd/ubi/ubi-media.h b/drivers/mtd/ubi/ubi-media.h
index c3185d9fd048..2ad940409053 100644
--- a/drivers/mtd/ubi/ubi-media.h
+++ b/drivers/mtd/ubi/ubi-media.h
@@ -98,10 +98,11 @@ enum {
  * Compatibility constants used by internal volumes.
  *
  * @UBI_COMPAT_DELETE: delete this internal volume before anything is written
- * to the flash
+ *                     to the flash
  * @UBI_COMPAT_RO: attach this device in read-only mode
  * @UBI_COMPAT_PRESERVE: preserve this internal volume - do not touch its
- * physical eraseblocks, don't allow the wear-leveling unit to move them
+ *                       physical eraseblocks, don't allow the wear-leveling
+ *                       sub-system to move them
  * @UBI_COMPAT_REJECT: reject this UBI image
  */
 enum {
@@ -123,7 +124,7 @@ enum {
  * struct ubi_ec_hdr - UBI erase counter header.
  * @magic: erase counter header magic number (%UBI_EC_HDR_MAGIC)
  * @version: version of UBI implementation which is supposed to accept this
- * UBI image
+ *           UBI image
  * @padding1: reserved for future, zeroes
  * @ec: the erase counter
  * @vid_hdr_offset: where the VID header starts
@@ -159,24 +160,23 @@ struct ubi_ec_hdr {
  * struct ubi_vid_hdr - on-flash UBI volume identifier header.
  * @magic: volume identifier header magic number (%UBI_VID_HDR_MAGIC)
  * @version: UBI implementation version which is supposed to accept this UBI
- * image (%UBI_VERSION)
+ *           image (%UBI_VERSION)
  * @vol_type: volume type (%UBI_VID_DYNAMIC or %UBI_VID_STATIC)
  * @copy_flag: if this logical eraseblock was copied from another physical
- * eraseblock (for wear-leveling reasons)
+ *             eraseblock (for wear-leveling reasons)
  * @compat: compatibility of this volume (%0, %UBI_COMPAT_DELETE,
- * %UBI_COMPAT_IGNORE, %UBI_COMPAT_PRESERVE, or %UBI_COMPAT_REJECT)
+ *          %UBI_COMPAT_IGNORE, %UBI_COMPAT_PRESERVE, or %UBI_COMPAT_REJECT)
  * @vol_id: ID of this volume
  * @lnum: logical eraseblock number
- * @leb_ver: version of this logical eraseblock (IMPORTANT: obsolete, to be
- * removed, kept only for not breaking older UBI users)
+ * @padding1: reserved for future, zeroes
  * @data_size: how many bytes of data this logical eraseblock contains
  * @used_ebs: total number of used logical eraseblocks in this volume
  * @data_pad: how many bytes at the end of this physical eraseblock are not
- * used
+ *            used
  * @data_crc: CRC checksum of the data stored in this logical eraseblock
- * @padding1: reserved for future, zeroes
- * @sqnum: sequence number
  * @padding2: reserved for future, zeroes
+ * @sqnum: sequence number
+ * @padding3: reserved for future, zeroes
  * @hdr_crc: volume identifier header CRC checksum
  *
  * The @sqnum is the value of the global sequence counter at the time when this
@@ -224,10 +224,6 @@ struct ubi_ec_hdr {
  * checksum is correct, this physical eraseblock is selected (P1). Otherwise
  * the older one (P) is selected.
  *
- * Note, there is an obsolete @leb_ver field which was used instead of @sqnum
- * in the past. But it is not used anymore and we keep it in order to be able
- * to deal with old UBI images. It will be removed at some point.
- *
  * There are 2 sorts of volumes in UBI: user volumes and internal volumes.
  * Internal volumes are not seen from outside and are used for various internal
  * UBI purposes. In this implementation there is only one internal volume - the
@@ -248,9 +244,9 @@ struct ubi_ec_hdr {
  * The @data_crc field contains the CRC checksum of the contents of the logical
  * eraseblock if this is a static volume. In case of dynamic volumes, it does
  * not contain the CRC checksum as a rule. The only exception is when the
- * data of the physical eraseblock was moved by the wear-leveling unit, then
- * the wear-leveling unit calculates the data CRC and stores it in the
- * @data_crc field. And of course, the @copy_flag is %in this case.
+ * data of the physical eraseblock was moved by the wear-leveling sub-system,
+ * then the wear-leveling sub-system calculates the data CRC and stores it in
+ * the @data_crc field. And of course, the @copy_flag is %in this case.
  *
  * The @data_size field is used only for static volumes because UBI has to know
  * how many bytes of data are stored in this eraseblock. For dynamic volumes,
@@ -277,14 +273,14 @@ struct ubi_vid_hdr {
 	__u8    compat;
 	__be32  vol_id;
 	__be32  lnum;
-	__be32  leb_ver; /* obsolete, to be removed, don't use */
+	__u8    padding1[4];
 	__be32  data_size;
 	__be32  used_ebs;
 	__be32  data_pad;
 	__be32  data_crc;
-	__u8    padding1[4];
+	__u8    padding2[4];
 	__be64  sqnum;
-	__u8    padding2[12];
+	__u8    padding3[12];
 	__be32  hdr_crc;
 } __attribute__ ((packed));
 
diff --git a/drivers/mtd/ubi/ubi.h b/drivers/mtd/ubi/ubi.h
index 67dcbd11c15c..1c3fa18c26a7 100644
--- a/drivers/mtd/ubi/ubi.h
+++ b/drivers/mtd/ubi/ubi.h
@@ -74,15 +74,15 @@
 #define UBI_IO_RETRIES 3
 
 /*
- * Error codes returned by the I/O unit.
+ * Error codes returned by the I/O sub-system.
  *
  * UBI_IO_PEB_EMPTY: the physical eraseblock is empty, i.e. it contains only
- * 0xFF bytes
+ *                   %0xFF bytes
  * UBI_IO_PEB_FREE: the physical eraseblock is free, i.e. it contains only a
- * valid erase counter header, and the rest are %0xFF bytes
+ *                  valid erase counter header, and the rest are %0xFF bytes
  * UBI_IO_BAD_EC_HDR: the erase counter header is corrupted (bad magic or CRC)
  * UBI_IO_BAD_VID_HDR: the volume identifier header is corrupted (bad magic or
- * CRC)
+ *                     CRC)
  * UBI_IO_BITFLIPS: bit-flips were detected and corrected
  */
 enum {
@@ -99,9 +99,9 @@ enum {
  * @ec: erase counter
  * @pnum: physical eraseblock number
  *
- * This data structure is used in the WL unit. Each physical eraseblock has a
- * corresponding &struct wl_entry object which may be kept in different
- * RB-trees. See WL unit for details.
+ * This data structure is used in the WL sub-system. Each physical eraseblock
+ * has a corresponding &struct wl_entry object which may be kept in different
+ * RB-trees. See WL sub-system for details.
  */
 struct ubi_wl_entry {
 	struct rb_node rb;
@@ -118,10 +118,10 @@ struct ubi_wl_entry {
  * @mutex: read/write mutex to implement read/write access serialization to
  *         the (@vol_id, @lnum) logical eraseblock
  *
- * This data structure is used in the EBA unit to implement per-LEB locking.
- * When a logical eraseblock is being locked - corresponding
+ * This data structure is used in the EBA sub-system to implement per-LEB
+ * locking. When a logical eraseblock is being locked - corresponding
  * &struct ubi_ltree_entry object is inserted to the lock tree (@ubi->ltree).
- * See EBA unit for details.
+ * See EBA sub-system for details.
  */
 struct ubi_ltree_entry {
 	struct rb_node rb;
@@ -131,6 +131,27 @@ struct ubi_ltree_entry {
 	struct rw_semaphore mutex;
 };
 
+/**
+ * struct ubi_rename_entry - volume re-name description data structure.
+ * @new_name_len: new volume name length
+ * @new_name: new volume name
+ * @remove: if not zero, this volume should be removed, not re-named
+ * @desc: descriptor of the volume
+ * @list: links re-name entries into a list
+ *
+ * This data structure is utilized in the multiple volume re-name code. Namely,
+ * UBI first creates a list of &struct ubi_rename_entry objects from the
+ * &struct ubi_rnvol_req request object, and then utilizes this list to do all
+ * the job.
+ */
+struct ubi_rename_entry {
+	int new_name_len;
+	char new_name[UBI_VOL_NAME_MAX + 1];
+	int remove;
+	struct ubi_volume_desc *desc;
+	struct list_head list;
+};
+
 struct ubi_volume_desc;
 
 /**
@@ -206,7 +227,7 @@ struct ubi_volume {
 	int alignment;
 	int data_pad;
 	int name_len;
-	char name[UBI_VOL_NAME_MAX+1];
+	char name[UBI_VOL_NAME_MAX + 1];
 
 	int upd_ebs;
 	int ch_lnum;
@@ -225,7 +246,7 @@ struct ubi_volume {
 #ifdef CONFIG_MTD_UBI_GLUEBI
 	/*
 	 * Gluebi-related stuff may be compiled out.
-	 * TODO: this should not be built into UBI but should be a separate
+	 * Note: this should not be built into UBI but should be a separate
 	 * ubimtd driver which works on top of UBI and emulates MTD devices.
 	 */
 	struct ubi_volume_desc *gluebi_desc;
@@ -235,8 +256,7 @@ struct ubi_volume {
 };
 
 /**
- * struct ubi_volume_desc - descriptor of the UBI volume returned when it is
- * opened.
+ * struct ubi_volume_desc - UBI volume descriptor returned when it is opened.
  * @vol: reference to the corresponding volume description object
  * @mode: open mode (%UBI_READONLY, %UBI_READWRITE, or %UBI_EXCLUSIVE)
  */
@@ -273,7 +293,7 @@ struct ubi_wl_entry;
  * @vtbl_size: size of the volume table in bytes
  * @vtbl: in-RAM volume table copy
  * @volumes_mutex: protects on-flash volume table and serializes volume
- *                 changes, like creation, deletion, update, resize
+ *                 changes, like creation, deletion, update, re-size and re-name
  *
  * @max_ec: current highest erase counter value
  * @mean_ec: current mean erase counter value
@@ -293,6 +313,7 @@ struct ubi_wl_entry;
  *           @move_to, @move_to_put @erase_pending, @wl_scheduled, and @works
  *           fields
  * @move_mutex: serializes eraseblock moves
+ * @work_sem: sycnhronizes the WL worker with use tasks
  * @wl_scheduled: non-zero if the wear-leveling was scheduled
  * @lookuptbl: a table to quickly find a &struct ubi_wl_entry object for any
  *             physical eraseblock
@@ -316,11 +337,11 @@ struct ubi_wl_entry;
  * @ro_mode: if the UBI device is in read-only mode
  * @leb_size: logical eraseblock size
  * @leb_start: starting offset of logical eraseblocks within physical
- * eraseblocks
+ *             eraseblocks
  * @ec_hdr_alsize: size of the EC header aligned to @hdrs_min_io_size
  * @vid_hdr_alsize: size of the VID header aligned to @hdrs_min_io_size
  * @vid_hdr_offset: starting offset of the volume identifier header (might be
- * unaligned)
+ *                  unaligned)
  * @vid_hdr_aloffset: starting offset of the VID header aligned to
  * @hdrs_min_io_size
  * @vid_hdr_shift: contains @vid_hdr_offset - @vid_hdr_aloffset
@@ -331,6 +352,8 @@ struct ubi_wl_entry;
  * @peb_buf1: a buffer of PEB size used for different purposes
  * @peb_buf2: another buffer of PEB size used for different purposes
  * @buf_mutex: proptects @peb_buf1 and @peb_buf2
+ * @ckvol_mutex: serializes static volume checking when opening
+ * @mult_mutex: serializes operations on multiple volumes, like re-nameing
  * @dbg_peb_buf: buffer of PEB size used for debugging
  * @dbg_buf_mutex: proptects @dbg_peb_buf
  */
@@ -356,16 +379,16 @@ struct ubi_device {
 	struct mutex volumes_mutex;
 
 	int max_ec;
-	/* TODO: mean_ec is not updated run-time, fix */
+	/* Note, mean_ec is not updated run-time - should be fixed */
 	int mean_ec;
 
-	/* EBA unit's stuff */
+	/* EBA sub-system's stuff */
 	unsigned long long global_sqnum;
 	spinlock_t ltree_lock;
 	struct rb_root ltree;
 	struct mutex alc_mutex;
 
-	/* Wear-leveling unit's stuff */
+	/* Wear-leveling sub-system's stuff */
 	struct rb_root used;
 	struct rb_root free;
 	struct rb_root scrub;
@@ -388,7 +411,7 @@ struct ubi_device {
 	int thread_enabled;
 	char bgt_name[sizeof(UBI_BGT_NAME_PATTERN)+2];
 
-	/* I/O unit's stuff */
+	/* I/O sub-system's stuff */
 	long long flash_size;
 	int peb_count;
 	int peb_size;
@@ -411,6 +434,7 @@ struct ubi_device {
 	void *peb_buf2;
 	struct mutex buf_mutex;
 	struct mutex ckvol_mutex;
+	struct mutex mult_mutex;
 #ifdef CONFIG_MTD_UBI_DEBUG
 	void *dbg_peb_buf;
 	struct mutex dbg_buf_mutex;
@@ -427,12 +451,15 @@ extern struct mutex ubi_devices_mutex;
 /* vtbl.c */
 int ubi_change_vtbl_record(struct ubi_device *ubi, int idx,
 			   struct ubi_vtbl_record *vtbl_rec);
+int ubi_vtbl_rename_volumes(struct ubi_device *ubi,
+			    struct list_head *rename_list);
 int ubi_read_volume_table(struct ubi_device *ubi, struct ubi_scan_info *si);
 
 /* vmt.c */
 int ubi_create_volume(struct ubi_device *ubi, struct ubi_mkvol_req *req);
-int ubi_remove_volume(struct ubi_volume_desc *desc);
+int ubi_remove_volume(struct ubi_volume_desc *desc, int no_vtbl);
 int ubi_resize_volume(struct ubi_volume_desc *desc, int reserved_pebs);
+int ubi_rename_volumes(struct ubi_device *ubi, struct list_head *rename_list);
 int ubi_add_volume(struct ubi_device *ubi, struct ubi_volume *vol);
 void ubi_free_volume(struct ubi_device *ubi, struct ubi_volume *vol);
 
@@ -447,7 +474,8 @@ int ubi_more_leb_change_data(struct ubi_device *ubi, struct ubi_volume *vol,
 			     const void __user *buf, int count);
 
 /* misc.c */
-int ubi_calc_data_len(const struct ubi_device *ubi, const void *buf, int length);
+int ubi_calc_data_len(const struct ubi_device *ubi, const void *buf,
+		      int length);
 int ubi_check_volume(struct ubi_device *ubi, int vol_id);
 void ubi_calculate_reserved(struct ubi_device *ubi);
 
@@ -477,7 +505,6 @@ int ubi_eba_atomic_leb_change(struct ubi_device *ubi, struct ubi_volume *vol,
 int ubi_eba_copy_leb(struct ubi_device *ubi, int from, int to,
 		     struct ubi_vid_hdr *vid_hdr);
 int ubi_eba_init_scan(struct ubi_device *ubi, struct ubi_scan_info *si);
-void ubi_eba_close(const struct ubi_device *ubi);
 
 /* wl.c */
 int ubi_wl_get_peb(struct ubi_device *ubi, int dtype);
diff --git a/drivers/mtd/ubi/upd.c b/drivers/mtd/ubi/upd.c
index ddaa1a56cc69..8b89cc18ff0b 100644
--- a/drivers/mtd/ubi/upd.c
+++ b/drivers/mtd/ubi/upd.c
@@ -39,7 +39,7 @@
  */
 
 #include <linux/err.h>
-#include <asm/uaccess.h>
+#include <linux/uaccess.h>
 #include <asm/div64.h>
 #include "ubi.h"
 
@@ -56,11 +56,11 @@ static int set_update_marker(struct ubi_device *ubi, struct ubi_volume *vol)
 	int err;
 	struct ubi_vtbl_record vtbl_rec;
 
-	dbg_msg("set update marker for volume %d", vol->vol_id);
+	dbg_gen("set update marker for volume %d", vol->vol_id);
 
 	if (vol->upd_marker) {
 		ubi_assert(ubi->vtbl[vol->vol_id].upd_marker);
-		dbg_msg("already set");
+		dbg_gen("already set");
 		return 0;
 	}
 
@@ -92,7 +92,7 @@ static int clear_update_marker(struct ubi_device *ubi, struct ubi_volume *vol,
 	uint64_t tmp;
 	struct ubi_vtbl_record vtbl_rec;
 
-	dbg_msg("clear update marker for volume %d", vol->vol_id);
+	dbg_gen("clear update marker for volume %d", vol->vol_id);
 
 	memcpy(&vtbl_rec, &ubi->vtbl[vol->vol_id],
 	       sizeof(struct ubi_vtbl_record));
@@ -133,7 +133,7 @@ int ubi_start_update(struct ubi_device *ubi, struct ubi_volume *vol,
 	int i, err;
 	uint64_t tmp;
 
-	dbg_msg("start update of volume %d, %llu bytes", vol->vol_id, bytes);
+	dbg_gen("start update of volume %d, %llu bytes", vol->vol_id, bytes);
 	ubi_assert(!vol->updating && !vol->changing_leb);
 	vol->updating = 1;
 
@@ -183,7 +183,7 @@ int ubi_start_leb_change(struct ubi_device *ubi, struct ubi_volume *vol,
 {
 	ubi_assert(!vol->updating && !vol->changing_leb);
 
-	dbg_msg("start changing LEB %d:%d, %u bytes",
+	dbg_gen("start changing LEB %d:%d, %u bytes",
 		vol->vol_id, req->lnum, req->bytes);
 	if (req->bytes == 0)
 		return ubi_eba_atomic_leb_change(ubi, vol, req->lnum, NULL, 0,
@@ -237,16 +237,17 @@ static int write_leb(struct ubi_device *ubi, struct ubi_volume *vol, int lnum,
 	int err;
 
 	if (vol->vol_type == UBI_DYNAMIC_VOLUME) {
-		len = ALIGN(len, ubi->min_io_size);
-		memset(buf + len, 0xFF, len - len);
+		int l = ALIGN(len, ubi->min_io_size);
 
-		len = ubi_calc_data_len(ubi, buf, len);
+		memset(buf + len, 0xFF, l - len);
+		len = ubi_calc_data_len(ubi, buf, l);
 		if (len == 0) {
-			dbg_msg("all %d bytes contain 0xFF - skip", len);
+			dbg_gen("all %d bytes contain 0xFF - skip", len);
 			return 0;
 		}
 
-		err = ubi_eba_write_leb(ubi, vol, lnum, buf, 0, len, UBI_UNKNOWN);
+		err = ubi_eba_write_leb(ubi, vol, lnum, buf, 0, len,
+					UBI_UNKNOWN);
 	} else {
 		/*
 		 * When writing static volume, and this is the last logical
@@ -267,6 +268,7 @@ static int write_leb(struct ubi_device *ubi, struct ubi_volume *vol, int lnum,
 
 /**
  * ubi_more_update_data - write more update data.
+ * @ubi: UBI device description object
  * @vol: volume description object
  * @buf: write data (user-space memory buffer)
  * @count: how much bytes to write
@@ -283,7 +285,7 @@ int ubi_more_update_data(struct ubi_device *ubi, struct ubi_volume *vol,
 	uint64_t tmp;
 	int lnum, offs, err = 0, len, to_write = count;
 
-	dbg_msg("write %d of %lld bytes, %lld already passed",
+	dbg_gen("write %d of %lld bytes, %lld already passed",
 		count, vol->upd_bytes, vol->upd_received);
 
 	if (ubi->ro_mode)
@@ -384,6 +386,7 @@ int ubi_more_update_data(struct ubi_device *ubi, struct ubi_volume *vol,
 
 /**
  * ubi_more_leb_change_data - accept more data for atomic LEB change.
+ * @ubi: UBI device description object
  * @vol: volume description object
  * @buf: write data (user-space memory buffer)
  * @count: how much bytes to write
@@ -400,7 +403,7 @@ int ubi_more_leb_change_data(struct ubi_device *ubi, struct ubi_volume *vol,
 {
 	int err;
 
-	dbg_msg("write %d of %lld bytes, %lld already passed",
+	dbg_gen("write %d of %lld bytes, %lld already passed",
 		count, vol->upd_bytes, vol->upd_received);
 
 	if (ubi->ro_mode)
@@ -418,7 +421,8 @@ int ubi_more_leb_change_data(struct ubi_device *ubi, struct ubi_volume *vol,
 	if (vol->upd_received == vol->upd_bytes) {
 		int len = ALIGN((int)vol->upd_bytes, ubi->min_io_size);
 
-		memset(vol->upd_buf + vol->upd_bytes, 0xFF, len - vol->upd_bytes);
+		memset(vol->upd_buf + vol->upd_bytes, 0xFF,
+		       len - vol->upd_bytes);
 		len = ubi_calc_data_len(ubi, vol->upd_buf, len);
 		err = ubi_eba_atomic_leb_change(ubi, vol, vol->ch_lnum,
 						vol->upd_buf, len, UBI_UNKNOWN);
diff --git a/drivers/mtd/ubi/vmt.c b/drivers/mtd/ubi/vmt.c
index 5be58d85c639..3531ca9a1e24 100644
--- a/drivers/mtd/ubi/vmt.c
+++ b/drivers/mtd/ubi/vmt.c
@@ -28,9 +28,9 @@
 #include "ubi.h"
 
 #ifdef CONFIG_MTD_UBI_DEBUG_PARANOID
-static void paranoid_check_volumes(struct ubi_device *ubi);
+static int paranoid_check_volumes(struct ubi_device *ubi);
 #else
-#define paranoid_check_volumes(ubi)
+#define paranoid_check_volumes(ubi) 0
 #endif
 
 static ssize_t vol_attribute_show(struct device *dev,
@@ -127,6 +127,7 @@ static void vol_release(struct device *dev)
 {
 	struct ubi_volume *vol = container_of(dev, struct ubi_volume, dev);
 
+	kfree(vol->eba_tbl);
 	kfree(vol);
 }
 
@@ -201,7 +202,7 @@ static void volume_sysfs_close(struct ubi_volume *vol)
  */
 int ubi_create_volume(struct ubi_device *ubi, struct ubi_mkvol_req *req)
 {
-	int i, err, vol_id = req->vol_id, dont_free = 0;
+	int i, err, vol_id = req->vol_id, do_free = 1;
 	struct ubi_volume *vol;
 	struct ubi_vtbl_record vtbl_rec;
 	uint64_t bytes;
@@ -217,7 +218,7 @@ int ubi_create_volume(struct ubi_device *ubi, struct ubi_mkvol_req *req)
 	spin_lock(&ubi->volumes_lock);
 	if (vol_id == UBI_VOL_NUM_AUTO) {
 		/* Find unused volume ID */
-		dbg_msg("search for vacant volume ID");
+		dbg_gen("search for vacant volume ID");
 		for (i = 0; i < ubi->vtbl_slots; i++)
 			if (!ubi->volumes[i]) {
 				vol_id = i;
@@ -232,7 +233,7 @@ int ubi_create_volume(struct ubi_device *ubi, struct ubi_mkvol_req *req)
 		req->vol_id = vol_id;
 	}
 
-	dbg_msg("volume ID %d, %llu bytes, type %d, name %s",
+	dbg_gen("volume ID %d, %llu bytes, type %d, name %s",
 		vol_id, (unsigned long long)req->bytes,
 		(int)req->vol_type, req->name);
 
@@ -252,7 +253,7 @@ int ubi_create_volume(struct ubi_device *ubi, struct ubi_mkvol_req *req)
 			goto out_unlock;
 		}
 
-        /* Calculate how many eraseblocks are requested */
+	/* Calculate how many eraseblocks are requested */
 	vol->usable_leb_size = ubi->leb_size - ubi->leb_size % req->alignment;
 	bytes = req->bytes;
 	if (do_div(bytes, vol->usable_leb_size))
@@ -274,7 +275,7 @@ int ubi_create_volume(struct ubi_device *ubi, struct ubi_mkvol_req *req)
 	vol->data_pad  = ubi->leb_size % vol->alignment;
 	vol->vol_type  = req->vol_type;
 	vol->name_len  = req->name_len;
-	memcpy(vol->name, req->name, vol->name_len + 1);
+	memcpy(vol->name, req->name, vol->name_len);
 	vol->ubi = ubi;
 
 	/*
@@ -349,7 +350,7 @@ int ubi_create_volume(struct ubi_device *ubi, struct ubi_mkvol_req *req)
 		vtbl_rec.vol_type = UBI_VID_DYNAMIC;
 	else
 		vtbl_rec.vol_type = UBI_VID_STATIC;
-	memcpy(vtbl_rec.name, vol->name, vol->name_len + 1);
+	memcpy(vtbl_rec.name, vol->name, vol->name_len);
 
 	err = ubi_change_vtbl_record(ubi, vol_id, &vtbl_rec);
 	if (err)
@@ -360,19 +361,19 @@ int ubi_create_volume(struct ubi_device *ubi, struct ubi_mkvol_req *req)
 	ubi->vol_count += 1;
 	spin_unlock(&ubi->volumes_lock);
 
-	paranoid_check_volumes(ubi);
-	return 0;
+	err = paranoid_check_volumes(ubi);
+	return err;
 
 out_sysfs:
 	/*
-	 * We have registered our device, we should not free the volume*
+	 * We have registered our device, we should not free the volume
 	 * description object in this function in case of an error - it is
 	 * freed by the release function.
 	 *
 	 * Get device reference to prevent the release function from being
 	 * called just after sysfs has been closed.
 	 */
-	dont_free = 1;
+	do_free = 0;
 	get_device(&vol->dev);
 	volume_sysfs_close(vol);
 out_gluebi:
@@ -382,17 +383,18 @@ out_gluebi:
 out_cdev:
 	cdev_del(&vol->cdev);
 out_mapping:
-	kfree(vol->eba_tbl);
+	if (do_free)
+		kfree(vol->eba_tbl);
 out_acc:
 	spin_lock(&ubi->volumes_lock);
 	ubi->rsvd_pebs -= vol->reserved_pebs;
 	ubi->avail_pebs += vol->reserved_pebs;
 out_unlock:
 	spin_unlock(&ubi->volumes_lock);
-	if (dont_free)
-		put_device(&vol->dev);
-	else
+	if (do_free)
 		kfree(vol);
+	else
+		put_device(&vol->dev);
 	ubi_err("cannot create volume %d, error %d", vol_id, err);
 	return err;
 }
@@ -400,19 +402,20 @@ out_unlock:
 /**
  * ubi_remove_volume - remove volume.
  * @desc: volume descriptor
+ * @no_vtbl: do not change volume table if not zero
  *
  * This function removes volume described by @desc. The volume has to be opened
  * in "exclusive" mode. Returns zero in case of success and a negative error
  * code in case of failure. The caller has to have the @ubi->volumes_mutex
  * locked.
  */
-int ubi_remove_volume(struct ubi_volume_desc *desc)
+int ubi_remove_volume(struct ubi_volume_desc *desc, int no_vtbl)
 {
 	struct ubi_volume *vol = desc->vol;
 	struct ubi_device *ubi = vol->ubi;
 	int i, err, vol_id = vol->vol_id, reserved_pebs = vol->reserved_pebs;
 
-	dbg_msg("remove UBI volume %d", vol_id);
+	dbg_gen("remove UBI volume %d", vol_id);
 	ubi_assert(desc->mode == UBI_EXCLUSIVE);
 	ubi_assert(vol == ubi->volumes[vol_id]);
 
@@ -435,9 +438,11 @@ int ubi_remove_volume(struct ubi_volume_desc *desc)
 	if (err)
 		goto out_err;
 
-	err = ubi_change_vtbl_record(ubi, vol_id, NULL);
-	if (err)
-		goto out_err;
+	if (!no_vtbl) {
+		err = ubi_change_vtbl_record(ubi, vol_id, NULL);
+		if (err)
+			goto out_err;
+	}
 
 	for (i = 0; i < vol->reserved_pebs; i++) {
 		err = ubi_eba_unmap_leb(ubi, vol, i);
@@ -445,8 +450,6 @@ int ubi_remove_volume(struct ubi_volume_desc *desc)
 			goto out_err;
 	}
 
-	kfree(vol->eba_tbl);
-	vol->eba_tbl = NULL;
 	cdev_del(&vol->cdev);
 	volume_sysfs_close(vol);
 
@@ -465,8 +468,9 @@ int ubi_remove_volume(struct ubi_volume_desc *desc)
 	ubi->vol_count -= 1;
 	spin_unlock(&ubi->volumes_lock);
 
-	paranoid_check_volumes(ubi);
-	return 0;
+	if (!no_vtbl)
+		err = paranoid_check_volumes(ubi);
+	return err;
 
 out_err:
 	ubi_err("cannot remove volume %d, error %d", vol_id, err);
@@ -497,7 +501,7 @@ int ubi_resize_volume(struct ubi_volume_desc *desc, int reserved_pebs)
 	if (ubi->ro_mode)
 		return -EROFS;
 
-	dbg_msg("re-size volume %d to from %d to %d PEBs",
+	dbg_gen("re-size volume %d to from %d to %d PEBs",
 		vol_id, vol->reserved_pebs, reserved_pebs);
 
 	if (vol->vol_type == UBI_STATIC_VOLUME &&
@@ -586,8 +590,8 @@ int ubi_resize_volume(struct ubi_volume_desc *desc, int reserved_pebs)
 			(long long)vol->used_ebs * vol->usable_leb_size;
 	}
 
-	paranoid_check_volumes(ubi);
-	return 0;
+	err = paranoid_check_volumes(ubi);
+	return err;
 
 out_acc:
 	if (pebs > 0) {
@@ -602,6 +606,44 @@ out_free:
 }
 
 /**
+ * ubi_rename_volumes - re-name UBI volumes.
+ * @ubi: UBI device description object
+ * @rename_list: list of &struct ubi_rename_entry objects
+ *
+ * This function re-names or removes volumes specified in the re-name list.
+ * Returns zero in case of success and a negative error code in case of
+ * failure.
+ */
+int ubi_rename_volumes(struct ubi_device *ubi, struct list_head *rename_list)
+{
+	int err;
+	struct ubi_rename_entry *re;
+
+	err = ubi_vtbl_rename_volumes(ubi, rename_list);
+	if (err)
+		return err;
+
+	list_for_each_entry(re, rename_list, list) {
+		if (re->remove) {
+			err = ubi_remove_volume(re->desc, 1);
+			if (err)
+				break;
+		} else {
+			struct ubi_volume *vol = re->desc->vol;
+
+			spin_lock(&ubi->volumes_lock);
+			vol->name_len = re->new_name_len;
+			memcpy(vol->name, re->new_name, re->new_name_len + 1);
+			spin_unlock(&ubi->volumes_lock);
+		}
+	}
+
+	if (!err)
+		err = paranoid_check_volumes(ubi);
+	return err;
+}
+
+/**
  * ubi_add_volume - add volume.
  * @ubi: UBI device description object
  * @vol: volume description object
@@ -615,8 +657,7 @@ int ubi_add_volume(struct ubi_device *ubi, struct ubi_volume *vol)
 	int err, vol_id = vol->vol_id;
 	dev_t dev;
 
-	dbg_msg("add volume %d", vol_id);
-	ubi_dbg_dump_vol_info(vol);
+	dbg_gen("add volume %d", vol_id);
 
 	/* Register character device for the volume */
 	cdev_init(&vol->cdev, &ubi_vol_cdev_operations);
@@ -650,8 +691,8 @@ int ubi_add_volume(struct ubi_device *ubi, struct ubi_volume *vol)
 		return err;
 	}
 
-	paranoid_check_volumes(ubi);
-	return 0;
+	err = paranoid_check_volumes(ubi);
+	return err;
 
 out_gluebi:
 	err = ubi_destroy_gluebi(vol);
@@ -672,7 +713,7 @@ void ubi_free_volume(struct ubi_device *ubi, struct ubi_volume *vol)
 {
 	int err;
 
-	dbg_msg("free volume %d", vol->vol_id);
+	dbg_gen("free volume %d", vol->vol_id);
 
 	ubi->volumes[vol->vol_id] = NULL;
 	err = ubi_destroy_gluebi(vol);
@@ -686,8 +727,10 @@ void ubi_free_volume(struct ubi_device *ubi, struct ubi_volume *vol)
  * paranoid_check_volume - check volume information.
  * @ubi: UBI device description object
  * @vol_id: volume ID
+ *
+ * Returns zero if volume is all right and a a negative error code if not.
  */
-static void paranoid_check_volume(struct ubi_device *ubi, int vol_id)
+static int paranoid_check_volume(struct ubi_device *ubi, int vol_id)
 {
 	int idx = vol_id2idx(ubi, vol_id);
 	int reserved_pebs, alignment, data_pad, vol_type, name_len, upd_marker;
@@ -705,16 +748,7 @@ static void paranoid_check_volume(struct ubi_device *ubi, int vol_id)
 			goto fail;
 		}
 		spin_unlock(&ubi->volumes_lock);
-		return;
-	}
-
-	if (vol->exclusive) {
-		/*
-		 * The volume may be being created at the moment, do not check
-		 * it (e.g., it may be in the middle of ubi_create_volume().
-		 */
-		spin_unlock(&ubi->volumes_lock);
-		return;
+		return 0;
 	}
 
 	if (vol->reserved_pebs < 0 || vol->alignment < 0 || vol->data_pad < 0 ||
@@ -727,7 +761,7 @@ static void paranoid_check_volume(struct ubi_device *ubi, int vol_id)
 		goto fail;
 	}
 
-	n = vol->alignment % ubi->min_io_size;
+	n = vol->alignment & (ubi->min_io_size - 1);
 	if (vol->alignment != 1 && n) {
 		ubi_err("alignment is not multiple of min I/O unit");
 		goto fail;
@@ -824,31 +858,39 @@ static void paranoid_check_volume(struct ubi_device *ubi, int vol_id)
 
 	if (alignment != vol->alignment || data_pad != vol->data_pad ||
 	    upd_marker != vol->upd_marker || vol_type != vol->vol_type ||
-	    name_len!= vol->name_len || strncmp(name, vol->name, name_len)) {
+	    name_len != vol->name_len || strncmp(name, vol->name, name_len)) {
 		ubi_err("volume info is different");
 		goto fail;
 	}
 
 	spin_unlock(&ubi->volumes_lock);
-	return;
+	return 0;
 
 fail:
 	ubi_err("paranoid check failed for volume %d", vol_id);
-	ubi_dbg_dump_vol_info(vol);
+	if (vol)
+		ubi_dbg_dump_vol_info(vol);
 	ubi_dbg_dump_vtbl_record(&ubi->vtbl[vol_id], vol_id);
 	spin_unlock(&ubi->volumes_lock);
-	BUG();
+	return -EINVAL;
 }
 
 /**
  * paranoid_check_volumes - check information about all volumes.
  * @ubi: UBI device description object
+ *
+ * Returns zero if volumes are all right and a a negative error code if not.
  */
-static void paranoid_check_volumes(struct ubi_device *ubi)
+static int paranoid_check_volumes(struct ubi_device *ubi)
 {
-	int i;
+	int i, err = 0;
 
-	for (i = 0; i < ubi->vtbl_slots; i++)
-		paranoid_check_volume(ubi, i);
+	for (i = 0; i < ubi->vtbl_slots; i++) {
+		err = paranoid_check_volume(ubi, i);
+		if (err)
+			break;
+	}
+
+	return err;
 }
 #endif
diff --git a/drivers/mtd/ubi/vtbl.c b/drivers/mtd/ubi/vtbl.c
index af36b12be278..217d0e111b2a 100644
--- a/drivers/mtd/ubi/vtbl.c
+++ b/drivers/mtd/ubi/vtbl.c
@@ -115,8 +115,58 @@ int ubi_change_vtbl_record(struct ubi_device *ubi, int idx,
 }
 
 /**
- * vtbl_check - check if volume table is not corrupted and contains sensible
- *              data.
+ * ubi_vtbl_rename_volumes - rename UBI volumes in the volume table.
+ * @ubi: UBI device description object
+ * @rename_list: list of &struct ubi_rename_entry objects
+ *
+ * This function re-names multiple volumes specified in @req in the volume
+ * table. Returns zero in case of success and a negative error code in case of
+ * failure.
+ */
+int ubi_vtbl_rename_volumes(struct ubi_device *ubi,
+			    struct list_head *rename_list)
+{
+	int i, err;
+	struct ubi_rename_entry *re;
+	struct ubi_volume *layout_vol;
+
+	list_for_each_entry(re, rename_list, list) {
+		uint32_t crc;
+		struct ubi_volume *vol = re->desc->vol;
+		struct ubi_vtbl_record *vtbl_rec = &ubi->vtbl[vol->vol_id];
+
+		if (re->remove) {
+			memcpy(vtbl_rec, &empty_vtbl_record,
+			       sizeof(struct ubi_vtbl_record));
+			continue;
+		}
+
+		vtbl_rec->name_len = cpu_to_be16(re->new_name_len);
+		memcpy(vtbl_rec->name, re->new_name, re->new_name_len);
+		memset(vtbl_rec->name + re->new_name_len, 0,
+		       UBI_VOL_NAME_MAX + 1 - re->new_name_len);
+		crc = crc32(UBI_CRC32_INIT, vtbl_rec,
+			    UBI_VTBL_RECORD_SIZE_CRC);
+		vtbl_rec->crc = cpu_to_be32(crc);
+	}
+
+	layout_vol = ubi->volumes[vol_id2idx(ubi, UBI_LAYOUT_VOLUME_ID)];
+	for (i = 0; i < UBI_LAYOUT_VOLUME_EBS; i++) {
+		err = ubi_eba_unmap_leb(ubi, layout_vol, i);
+		if (err)
+			return err;
+
+		err = ubi_eba_write_leb(ubi, layout_vol, i, ubi->vtbl, 0,
+					ubi->vtbl_size, UBI_LONGTERM);
+		if (err)
+			return err;
+	}
+
+	return 0;
+}
+
+/**
+ * vtbl_check - check if volume table is not corrupted and sensible.
  * @ubi: UBI device description object
  * @vtbl: volume table
  *
@@ -127,7 +177,7 @@ static int vtbl_check(const struct ubi_device *ubi,
 		      const struct ubi_vtbl_record *vtbl)
 {
 	int i, n, reserved_pebs, alignment, data_pad, vol_type, name_len;
-	int upd_marker;
+	int upd_marker, err;
 	uint32_t crc;
 	const char *name;
 
@@ -153,7 +203,7 @@ static int vtbl_check(const struct ubi_device *ubi,
 		if (reserved_pebs == 0) {
 			if (memcmp(&vtbl[i], &empty_vtbl_record,
 						UBI_VTBL_RECORD_SIZE)) {
-				dbg_err("bad empty record");
+				err = 2;
 				goto bad;
 			}
 			continue;
@@ -161,56 +211,57 @@ static int vtbl_check(const struct ubi_device *ubi,
 
 		if (reserved_pebs < 0 || alignment < 0 || data_pad < 0 ||
 		    name_len < 0) {
-			dbg_err("negative values");
+			err = 3;
 			goto bad;
 		}
 
 		if (alignment > ubi->leb_size || alignment == 0) {
-			dbg_err("bad alignment");
+			err = 4;
 			goto bad;
 		}
 
-		n = alignment % ubi->min_io_size;
+		n = alignment & (ubi->min_io_size - 1);
 		if (alignment != 1 && n) {
-			dbg_err("alignment is not multiple of min I/O unit");
+			err = 5;
 			goto bad;
 		}
 
 		n = ubi->leb_size % alignment;
 		if (data_pad != n) {
 			dbg_err("bad data_pad, has to be %d", n);
+			err = 6;
 			goto bad;
 		}
 
 		if (vol_type != UBI_VID_DYNAMIC && vol_type != UBI_VID_STATIC) {
-			dbg_err("bad vol_type");
+			err = 7;
 			goto bad;
 		}
 
 		if (upd_marker != 0 && upd_marker != 1) {
-			dbg_err("bad upd_marker");
+			err = 8;
 			goto bad;
 		}
 
 		if (reserved_pebs > ubi->good_peb_count) {
 			dbg_err("too large reserved_pebs, good PEBs %d",
 				ubi->good_peb_count);
+			err = 9;
 			goto bad;
 		}
 
 		if (name_len > UBI_VOL_NAME_MAX) {
-			dbg_err("too long volume name, max %d",
-				UBI_VOL_NAME_MAX);
+			err = 10;
 			goto bad;
 		}
 
 		if (name[0] == '\0') {
-			dbg_err("NULL volume name");
+			err = 11;
 			goto bad;
 		}
 
 		if (name_len != strnlen(name, name_len + 1)) {
-			dbg_err("bad name_len");
+			err = 12;
 			goto bad;
 		}
 	}
@@ -235,7 +286,7 @@ static int vtbl_check(const struct ubi_device *ubi,
 	return 0;
 
 bad:
-	ubi_err("volume table check failed, record %d", i);
+	ubi_err("volume table check failed: record %d, error %d", i, err);
 	ubi_dbg_dump_vtbl_record(&vtbl[i], i);
 	return -EINVAL;
 }
@@ -287,7 +338,6 @@ retry:
 			     vid_hdr->data_pad = cpu_to_be32(0);
 	vid_hdr->lnum = cpu_to_be32(copy);
 	vid_hdr->sqnum = cpu_to_be64(++si->max_sqnum);
-	vid_hdr->leb_ver = cpu_to_be32(old_seb ? old_seb->leb_ver + 1: 0);
 
 	/* The EC header is already there, write the VID header */
 	err = ubi_io_write_vid_hdr(ubi, new_seb->pnum, vid_hdr);
@@ -370,7 +420,7 @@ static struct ubi_vtbl_record *process_lvol(struct ubi_device *ubi,
 	 *    to LEB 0.
 	 */
 
-	dbg_msg("check layout volume");
+	dbg_gen("check layout volume");
 
 	/* Read both LEB 0 and LEB 1 into memory */
 	ubi_rb_for_each_entry(rb, seb, &sv->root, u.rb) {
@@ -384,7 +434,16 @@ static struct ubi_vtbl_record *process_lvol(struct ubi_device *ubi,
 		err = ubi_io_read_data(ubi, leb[seb->lnum], seb->pnum, 0,
 				       ubi->vtbl_size);
 		if (err == UBI_IO_BITFLIPS || err == -EBADMSG)
-			/* Scrub the PEB later */
+			/*
+			 * Scrub the PEB later. Note, -EBADMSG indicates an
+			 * uncorrectable ECC error, but we have our own CRC and
+			 * the data will be checked later. If the data is OK,
+			 * the PEB will be scrubbed (because we set
+			 * seb->scrub). If the data is not OK, the contents of
+			 * the PEB will be recovered from the second copy, and
+			 * seb->scrub will be cleared in
+			 * 'ubi_scan_add_used()'.
+			 */
 			seb->scrub = 1;
 		else if (err)
 			goto out_free;
@@ -400,7 +459,8 @@ static struct ubi_vtbl_record *process_lvol(struct ubi_device *ubi,
 	if (!leb_corrupted[0]) {
 		/* LEB 0 is OK */
 		if (leb[1])
-			leb_corrupted[1] = memcmp(leb[0], leb[1], ubi->vtbl_size);
+			leb_corrupted[1] = memcmp(leb[0], leb[1],
+						  ubi->vtbl_size);
 		if (leb_corrupted[1]) {
 			ubi_warn("volume table copy #2 is corrupted");
 			err = create_vtbl(ubi, si, 1, leb[0]);
@@ -620,30 +680,32 @@ static int init_volumes(struct ubi_device *ubi, const struct ubi_scan_info *si,
 static int check_sv(const struct ubi_volume *vol,
 		    const struct ubi_scan_volume *sv)
 {
+	int err;
+
 	if (sv->highest_lnum >= vol->reserved_pebs) {
-		dbg_err("bad highest_lnum");
+		err = 1;
 		goto bad;
 	}
 	if (sv->leb_count > vol->reserved_pebs) {
-		dbg_err("bad leb_count");
+		err = 2;
 		goto bad;
 	}
 	if (sv->vol_type != vol->vol_type) {
-		dbg_err("bad vol_type");
+		err = 3;
 		goto bad;
 	}
 	if (sv->used_ebs > vol->reserved_pebs) {
-		dbg_err("bad used_ebs");
+		err = 4;
 		goto bad;
 	}
 	if (sv->data_pad != vol->data_pad) {
-		dbg_err("bad data_pad");
+		err = 5;
 		goto bad;
 	}
 	return 0;
 
 bad:
-	ubi_err("bad scanning information");
+	ubi_err("bad scanning information, error %d", err);
 	ubi_dbg_dump_sv(sv);
 	ubi_dbg_dump_vol_info(vol);
 	return -EINVAL;
@@ -672,14 +734,13 @@ static int check_scanning_info(const struct ubi_device *ubi,
 		return -EINVAL;
 	}
 
-	if (si->highest_vol_id >= ubi->vtbl_slots + UBI_INT_VOL_COUNT&&
+	if (si->highest_vol_id >= ubi->vtbl_slots + UBI_INT_VOL_COUNT &&
 	    si->highest_vol_id < UBI_INTERNAL_VOL_START) {
 		ubi_err("too large volume ID %d found by scanning",
 			si->highest_vol_id);
 		return -EINVAL;
 	}
 
-
 	for (i = 0; i < ubi->vtbl_slots + UBI_INT_VOL_COUNT; i++) {
 		cond_resched();
 
@@ -717,8 +778,7 @@ static int check_scanning_info(const struct ubi_device *ubi,
 }
 
 /**
- * ubi_read_volume_table - read volume table.
- * information.
+ * ubi_read_volume_table - read the volume table.
  * @ubi: UBI device description object
  * @si: scanning information
  *
@@ -797,11 +857,10 @@ int ubi_read_volume_table(struct ubi_device *ubi, struct ubi_scan_info *si)
 
 out_free:
 	vfree(ubi->vtbl);
-	for (i = 0; i < ubi->vtbl_slots + UBI_INT_VOL_COUNT; i++)
-		if (ubi->volumes[i]) {
-			kfree(ubi->volumes[i]);
-			ubi->volumes[i] = NULL;
-		}
+	for (i = 0; i < ubi->vtbl_slots + UBI_INT_VOL_COUNT; i++) {
+		kfree(ubi->volumes[i]);
+		ubi->volumes[i] = NULL;
+	}
 	return err;
 }
 
diff --git a/drivers/mtd/ubi/wl.c b/drivers/mtd/ubi/wl.c
index a471a491f0ab..05d70937b543 100644
--- a/drivers/mtd/ubi/wl.c
+++ b/drivers/mtd/ubi/wl.c
@@ -19,22 +19,22 @@
  */
 
 /*
- * UBI wear-leveling unit.
+ * UBI wear-leveling sub-system.
  *
- * This unit is responsible for wear-leveling. It works in terms of physical
- * eraseblocks and erase counters and knows nothing about logical eraseblocks,
- * volumes, etc. From this unit's perspective all physical eraseblocks are of
- * two types - used and free. Used physical eraseblocks are those that were
- * "get" by the 'ubi_wl_get_peb()' function, and free physical eraseblocks are
- * those that were put by the 'ubi_wl_put_peb()' function.
+ * This sub-system is responsible for wear-leveling. It works in terms of
+ * physical* eraseblocks and erase counters and knows nothing about logical
+ * eraseblocks, volumes, etc. From this sub-system's perspective all physical
+ * eraseblocks are of two types - used and free. Used physical eraseblocks are
+ * those that were "get" by the 'ubi_wl_get_peb()' function, and free physical
+ * eraseblocks are those that were put by the 'ubi_wl_put_peb()' function.
  *
  * Physical eraseblocks returned by 'ubi_wl_get_peb()' have only erase counter
- * header. The rest of the physical eraseblock contains only 0xFF bytes.
+ * header. The rest of the physical eraseblock contains only %0xFF bytes.
  *
- * When physical eraseblocks are returned to the WL unit by means of the
+ * When physical eraseblocks are returned to the WL sub-system by means of the
  * 'ubi_wl_put_peb()' function, they are scheduled for erasure. The erasure is
  * done asynchronously in context of the per-UBI device background thread,
- * which is also managed by the WL unit.
+ * which is also managed by the WL sub-system.
  *
  * The wear-leveling is ensured by means of moving the contents of used
  * physical eraseblocks with low erase counter to free physical eraseblocks
@@ -43,34 +43,36 @@
  * The 'ubi_wl_get_peb()' function accepts data type hints which help to pick
  * an "optimal" physical eraseblock. For example, when it is known that the
  * physical eraseblock will be "put" soon because it contains short-term data,
- * the WL unit may pick a free physical eraseblock with low erase counter, and
- * so forth.
+ * the WL sub-system may pick a free physical eraseblock with low erase
+ * counter, and so forth.
  *
- * If the WL unit fails to erase a physical eraseblock, it marks it as bad.
+ * If the WL sub-system fails to erase a physical eraseblock, it marks it as
+ * bad.
  *
- * This unit is also responsible for scrubbing. If a bit-flip is detected in a
- * physical eraseblock, it has to be moved. Technically this is the same as
- * moving it for wear-leveling reasons.
+ * This sub-system is also responsible for scrubbing. If a bit-flip is detected
+ * in a physical eraseblock, it has to be moved. Technically this is the same
+ * as moving it for wear-leveling reasons.
  *
- * As it was said, for the UBI unit all physical eraseblocks are either "free"
- * or "used". Free eraseblock are kept in the @wl->free RB-tree, while used
- * eraseblocks are kept in a set of different RB-trees: @wl->used,
+ * As it was said, for the UBI sub-system all physical eraseblocks are either
+ * "free" or "used". Free eraseblock are kept in the @wl->free RB-tree, while
+ * used eraseblocks are kept in a set of different RB-trees: @wl->used,
  * @wl->prot.pnum, @wl->prot.aec, and @wl->scrub.
  *
  * Note, in this implementation, we keep a small in-RAM object for each physical
  * eraseblock. This is surely not a scalable solution. But it appears to be good
  * enough for moderately large flashes and it is simple. In future, one may
- * re-work this unit and make it more scalable.
+ * re-work this sub-system and make it more scalable.
  *
- * At the moment this unit does not utilize the sequence number, which was
- * introduced relatively recently. But it would be wise to do this because the
- * sequence number of a logical eraseblock characterizes how old is it. For
+ * At the moment this sub-system does not utilize the sequence number, which
+ * was introduced relatively recently. But it would be wise to do this because
+ * the sequence number of a logical eraseblock characterizes how old is it. For
  * example, when we move a PEB with low erase counter, and we need to pick the
  * target PEB, we pick a PEB with the highest EC if our PEB is "old" and we
  * pick target PEB with an average EC if our PEB is not very "old". This is a
- * room for future re-works of the WL unit.
+ * room for future re-works of the WL sub-system.
  *
- * FIXME: looks too complex, should be simplified (later).
+ * Note: the stuff with protection trees looks too complex and is difficult to
+ * understand. Should be fixed.
  */
 
 #include <linux/slab.h>
@@ -92,20 +94,21 @@
 
 /*
  * Maximum difference between two erase counters. If this threshold is
- * exceeded, the WL unit starts moving data from used physical eraseblocks with
- * low erase counter to free physical eraseblocks with high erase counter.
+ * exceeded, the WL sub-system starts moving data from used physical
+ * eraseblocks with low erase counter to free physical eraseblocks with high
+ * erase counter.
  */
 #define UBI_WL_THRESHOLD CONFIG_MTD_UBI_WL_THRESHOLD
 
 /*
- * When a physical eraseblock is moved, the WL unit has to pick the target
+ * When a physical eraseblock is moved, the WL sub-system has to pick the target
  * physical eraseblock to move to. The simplest way would be just to pick the
  * one with the highest erase counter. But in certain workloads this could lead
  * to an unlimited wear of one or few physical eraseblock. Indeed, imagine a
  * situation when the picked physical eraseblock is constantly erased after the
  * data is written to it. So, we have a constant which limits the highest erase
- * counter of the free physical eraseblock to pick. Namely, the WL unit does
- * not pick eraseblocks with erase counter greater then the lowest erase
+ * counter of the free physical eraseblock to pick. Namely, the WL sub-system
+ * does not pick eraseblocks with erase counter greater then the lowest erase
  * counter plus %WL_FREE_MAX_DIFF.
  */
 #define WL_FREE_MAX_DIFF (2*UBI_WL_THRESHOLD)
@@ -123,11 +126,11 @@
  * @abs_ec: the absolute erase counter value when the protection ends
  * @e: the wear-leveling entry of the physical eraseblock under protection
  *
- * When the WL unit returns a physical eraseblock, the physical eraseblock is
- * protected from being moved for some "time". For this reason, the physical
- * eraseblock is not directly moved from the @wl->free tree to the @wl->used
- * tree. There is one more tree in between where this physical eraseblock is
- * temporarily stored (@wl->prot).
+ * When the WL sub-system returns a physical eraseblock, the physical
+ * eraseblock is protected from being moved for some "time". For this reason,
+ * the physical eraseblock is not directly moved from the @wl->free tree to the
+ * @wl->used tree. There is one more tree in between where this physical
+ * eraseblock is temporarily stored (@wl->prot).
  *
  * All this protection stuff is needed because:
  *  o we don't want to move physical eraseblocks just after we have given them
@@ -175,7 +178,6 @@ struct ubi_wl_prot_entry {
  * @list: a link in the list of pending works
  * @func: worker function
  * @priv: private data of the worker function
- *
  * @e: physical eraseblock to erase
  * @torture: if the physical eraseblock has to be tortured
  *
@@ -473,52 +475,47 @@ retry:
 	}
 
 	switch (dtype) {
-		case UBI_LONGTERM:
-			/*
-			 * For long term data we pick a physical eraseblock
-			 * with high erase counter. But the highest erase
-			 * counter we can pick is bounded by the the lowest
-			 * erase counter plus %WL_FREE_MAX_DIFF.
-			 */
-			e = find_wl_entry(&ubi->free, WL_FREE_MAX_DIFF);
-			protect = LT_PROTECTION;
-			break;
-		case UBI_UNKNOWN:
-			/*
-			 * For unknown data we pick a physical eraseblock with
-			 * medium erase counter. But we by no means can pick a
-			 * physical eraseblock with erase counter greater or
-			 * equivalent than the lowest erase counter plus
-			 * %WL_FREE_MAX_DIFF.
-			 */
-			first = rb_entry(rb_first(&ubi->free),
-					 struct ubi_wl_entry, rb);
-			last = rb_entry(rb_last(&ubi->free),
-					struct ubi_wl_entry, rb);
+	case UBI_LONGTERM:
+		/*
+		 * For long term data we pick a physical eraseblock with high
+		 * erase counter. But the highest erase counter we can pick is
+		 * bounded by the the lowest erase counter plus
+		 * %WL_FREE_MAX_DIFF.
+		 */
+		e = find_wl_entry(&ubi->free, WL_FREE_MAX_DIFF);
+		protect = LT_PROTECTION;
+		break;
+	case UBI_UNKNOWN:
+		/*
+		 * For unknown data we pick a physical eraseblock with medium
+		 * erase counter. But we by no means can pick a physical
+		 * eraseblock with erase counter greater or equivalent than the
+		 * lowest erase counter plus %WL_FREE_MAX_DIFF.
+		 */
+		first = rb_entry(rb_first(&ubi->free), struct ubi_wl_entry, rb);
+		last = rb_entry(rb_last(&ubi->free), struct ubi_wl_entry, rb);
 
-			if (last->ec - first->ec < WL_FREE_MAX_DIFF)
-				e = rb_entry(ubi->free.rb_node,
-						struct ubi_wl_entry, rb);
-			else {
-				medium_ec = (first->ec + WL_FREE_MAX_DIFF)/2;
-				e = find_wl_entry(&ubi->free, medium_ec);
-			}
-			protect = U_PROTECTION;
-			break;
-		case UBI_SHORTTERM:
-			/*
-			 * For short term data we pick a physical eraseblock
-			 * with the lowest erase counter as we expect it will
-			 * be erased soon.
-			 */
-			e = rb_entry(rb_first(&ubi->free),
-				     struct ubi_wl_entry, rb);
-			protect = ST_PROTECTION;
-			break;
-		default:
-			protect = 0;
-			e = NULL;
-			BUG();
+		if (last->ec - first->ec < WL_FREE_MAX_DIFF)
+			e = rb_entry(ubi->free.rb_node,
+					struct ubi_wl_entry, rb);
+		else {
+			medium_ec = (first->ec + WL_FREE_MAX_DIFF)/2;
+			e = find_wl_entry(&ubi->free, medium_ec);
+		}
+		protect = U_PROTECTION;
+		break;
+	case UBI_SHORTTERM:
+		/*
+		 * For short term data we pick a physical eraseblock with the
+		 * lowest erase counter as we expect it will be erased soon.
+		 */
+		e = rb_entry(rb_first(&ubi->free), struct ubi_wl_entry, rb);
+		protect = ST_PROTECTION;
+		break;
+	default:
+		protect = 0;
+		e = NULL;
+		BUG();
 	}
 
 	/*
@@ -582,7 +579,8 @@ found:
  * This function returns zero in case of success and a negative error code in
  * case of failure.
  */
-static int sync_erase(struct ubi_device *ubi, struct ubi_wl_entry *e, int torture)
+static int sync_erase(struct ubi_device *ubi, struct ubi_wl_entry *e,
+		      int torture)
 {
 	int err;
 	struct ubi_ec_hdr *ec_hdr;
@@ -634,8 +632,7 @@ out_free:
 }
 
 /**
- * check_protection_over - check if it is time to stop protecting some
- * physical eraseblocks.
+ * check_protection_over - check if it is time to stop protecting some PEBs.
  * @ubi: UBI device description object
  *
  * This function is called after each erase operation, when the absolute erase
@@ -871,6 +868,10 @@ static int wear_leveling_worker(struct ubi_device *ubi, struct ubi_work *wrk,
 	}
 
 	ubi_free_vid_hdr(ubi, vid_hdr);
+	if (scrubbing && !protect)
+		ubi_msg("scrubbed PEB %d, data moved to PEB %d",
+			e1->pnum, e2->pnum);
+
 	spin_lock(&ubi->wl_lock);
 	if (protect)
 		prot_tree_add(ubi, e1, pe, protect);
@@ -1054,8 +1055,8 @@ static int erase_worker(struct ubi_device *ubi, struct ubi_work *wl_wrk,
 		spin_unlock(&ubi->wl_lock);
 
 		/*
-		 * One more erase operation has happened, take care about protected
-		 * physical eraseblocks.
+		 * One more erase operation has happened, take care about
+		 * protected physical eraseblocks.
 		 */
 		check_protection_over(ubi);
 
@@ -1136,7 +1137,7 @@ out_ro:
 }
 
 /**
- * ubi_wl_put_peb - return a physical eraseblock to the wear-leveling unit.
+ * ubi_wl_put_peb - return a PEB to the wear-leveling sub-system.
  * @ubi: UBI device description object
  * @pnum: physical eraseblock to return
  * @torture: if this physical eraseblock has to be tortured
@@ -1175,11 +1176,11 @@ retry:
 		/*
 		 * User is putting the physical eraseblock which was selected
 		 * as the target the data is moved to. It may happen if the EBA
-		 * unit already re-mapped the LEB in 'ubi_eba_copy_leb()' but
-		 * the WL unit has not put the PEB to the "used" tree yet, but
-		 * it is about to do this. So we just set a flag which will
-		 * tell the WL worker that the PEB is not needed anymore and
-		 * should be scheduled for erasure.
+		 * sub-system already re-mapped the LEB in 'ubi_eba_copy_leb()'
+		 * but the WL sub-system has not put the PEB to the "used" tree
+		 * yet, but it is about to do this. So we just set a flag which
+		 * will tell the WL worker that the PEB is not needed anymore
+		 * and should be scheduled for erasure.
 		 */
 		dbg_wl("PEB %d is the target of data moving", pnum);
 		ubi_assert(!ubi->move_to_put);
@@ -1229,7 +1230,7 @@ int ubi_wl_scrub_peb(struct ubi_device *ubi, int pnum)
 {
 	struct ubi_wl_entry *e;
 
-	ubi_msg("schedule PEB %d for scrubbing", pnum);
+	dbg_msg("schedule PEB %d for scrubbing", pnum);
 
 retry:
 	spin_lock(&ubi->wl_lock);
@@ -1368,7 +1369,7 @@ int ubi_thread(void *u)
 		int err;
 
 		if (kthread_should_stop())
-			goto out;
+			break;
 
 		if (try_to_freeze())
 			continue;
@@ -1403,7 +1404,6 @@ int ubi_thread(void *u)
 		cond_resched();
 	}
 
-out:
 	dbg_wl("background thread \"%s\" is killed", ubi->bgt_name);
 	return 0;
 }
@@ -1426,8 +1426,7 @@ static void cancel_pending(struct ubi_device *ubi)
 }
 
 /**
- * ubi_wl_init_scan - initialize the wear-leveling unit using scanning
- * information.
+ * ubi_wl_init_scan - initialize the WL sub-system using scanning information.
  * @ubi: UBI device description object
  * @si: scanning information
  *
@@ -1584,13 +1583,12 @@ static void protection_trees_destroy(struct ubi_device *ubi)
 }
 
 /**
- * ubi_wl_close - close the wear-leveling unit.
+ * ubi_wl_close - close the wear-leveling sub-system.
  * @ubi: UBI device description object
  */
 void ubi_wl_close(struct ubi_device *ubi)
 {
-	dbg_wl("close the UBI wear-leveling unit");
-
+	dbg_wl("close the WL sub-system");
 	cancel_pending(ubi);
 	protection_trees_destroy(ubi);
 	tree_destroy(&ubi->used);
@@ -1602,8 +1600,7 @@ void ubi_wl_close(struct ubi_device *ubi)
 #ifdef CONFIG_MTD_UBI_DEBUG_PARANOID
 
 /**
- * paranoid_check_ec - make sure that the erase counter of a physical eraseblock
- * is correct.
+ * paranoid_check_ec - make sure that the erase counter of a PEB is correct.
  * @ubi: UBI device description object
  * @pnum: the physical eraseblock number to check
  * @ec: the erase counter to check
@@ -1644,13 +1641,12 @@ out_free:
 }
 
 /**
- * paranoid_check_in_wl_tree - make sure that a wear-leveling entry is present
- * in a WL RB-tree.
+ * paranoid_check_in_wl_tree - check that wear-leveling entry is in WL RB-tree.
  * @e: the wear-leveling entry to check
  * @root: the root of the tree
  *
- * This function returns zero if @e is in the @root RB-tree and %1 if it
- * is not.
+ * This function returns zero if @e is in the @root RB-tree and %1 if it is
+ * not.
  */
 static int paranoid_check_in_wl_tree(struct ubi_wl_entry *e,
 				     struct rb_root *root)
diff --git a/drivers/net/3c523.c b/drivers/net/3c523.c
index dc6e474229b1..e2ce41d3828e 100644
--- a/drivers/net/3c523.c
+++ b/drivers/net/3c523.c
@@ -640,10 +640,8 @@ static int init586(struct net_device *dev)
 	cfg_cmd->time_low = 0x00;
 	cfg_cmd->time_high = 0xf2;
 	cfg_cmd->promisc = 0;
-	if (dev->flags & (IFF_ALLMULTI | IFF_PROMISC)) {
+	if (dev->flags & (IFF_ALLMULTI | IFF_PROMISC))
 		cfg_cmd->promisc = 1;
-		dev->flags |= IFF_PROMISC;
-	}
 	cfg_cmd->carr_coll = 0x00;
 
 	p->scb->cbl_offset = make16(cfg_cmd);
diff --git a/drivers/net/3c527.c b/drivers/net/3c527.c
index 6aca0c640f13..abc84f765973 100644
--- a/drivers/net/3c527.c
+++ b/drivers/net/3c527.c
@@ -1521,14 +1521,11 @@ static void do_mc32_set_multicast_list(struct net_device *dev, int retry)
 	struct mc32_local *lp = netdev_priv(dev);
 	u16 filt = (1<<2); /* Save Bad Packets, for stats purposes */
 
-	if (dev->flags&IFF_PROMISC)
+	if ((dev->flags&IFF_PROMISC) ||
+	    (dev->flags&IFF_ALLMULTI) ||
+	    dev->mc_count > 10)
 		/* Enable promiscuous mode */
 		filt |= 1;
-	else if((dev->flags&IFF_ALLMULTI) || dev->mc_count > 10)
-	{
-		dev->flags|=IFF_PROMISC;
-		filt |= 1;
-	}
 	else if(dev->mc_count)
 	{
 		unsigned char block[62];
diff --git a/drivers/net/3c59x.c b/drivers/net/3c59x.c
index 8db4e6b89482..491ee16da5c1 100644
--- a/drivers/net/3c59x.c
+++ b/drivers/net/3c59x.c
@@ -1692,12 +1692,14 @@ vortex_open(struct net_device *dev)
 			vp->rx_ring[i].next = cpu_to_le32(vp->rx_ring_dma + sizeof(struct boom_rx_desc) * (i+1));
 			vp->rx_ring[i].status = 0;	/* Clear complete bit. */
 			vp->rx_ring[i].length = cpu_to_le32(PKT_BUF_SZ | LAST_FRAG);
-			skb = dev_alloc_skb(PKT_BUF_SZ);
+
+			skb = __netdev_alloc_skb(dev, PKT_BUF_SZ + NET_IP_ALIGN,
+						 GFP_KERNEL);
 			vp->rx_skbuff[i] = skb;
 			if (skb == NULL)
 				break;			/* Bad news!  */
-			skb->dev = dev;			/* Mark as being used by this device. */
-			skb_reserve(skb, 2);	/* Align IP on 16 byte boundaries */
+
+			skb_reserve(skb, NET_IP_ALIGN);	/* Align IP on 16 byte boundaries */
 			vp->rx_ring[i].addr = cpu_to_le32(pci_map_single(VORTEX_PCI(vp), skb->data, PKT_BUF_SZ, PCI_DMA_FROMDEVICE));
 		}
 		if (i != RX_RING_SIZE) {
@@ -2538,7 +2540,7 @@ boomerang_rx(struct net_device *dev)
 		struct sk_buff *skb;
 		entry = vp->dirty_rx % RX_RING_SIZE;
 		if (vp->rx_skbuff[entry] == NULL) {
-			skb = dev_alloc_skb(PKT_BUF_SZ);
+			skb = netdev_alloc_skb(dev, PKT_BUF_SZ + NET_IP_ALIGN);
 			if (skb == NULL) {
 				static unsigned long last_jif;
 				if (time_after(jiffies, last_jif + 10 * HZ)) {
@@ -2549,8 +2551,8 @@ boomerang_rx(struct net_device *dev)
 					mod_timer(&vp->rx_oom_timer, RUN_AT(HZ * 1));
 				break;			/* Bad news!  */
 			}
-			skb->dev = dev;			/* Mark as being used by this device. */
-			skb_reserve(skb, 2);	/* Align IP on 16 byte boundaries */
+
+			skb_reserve(skb, NET_IP_ALIGN);
 			vp->rx_ring[entry].addr = cpu_to_le32(pci_map_single(VORTEX_PCI(vp), skb->data, PKT_BUF_SZ, PCI_DMA_FROMDEVICE));
 			vp->rx_skbuff[entry] = skb;
 		}
diff --git a/drivers/net/8390.c b/drivers/net/8390.c
index dc5d2584bd0c..f72a2e87d569 100644
--- a/drivers/net/8390.c
+++ b/drivers/net/8390.c
@@ -9,42 +9,39 @@ int ei_open(struct net_device *dev)
 {
 	return __ei_open(dev);
 }
+EXPORT_SYMBOL(ei_open);
 
 int ei_close(struct net_device *dev)
 {
 	return __ei_close(dev);
 }
+EXPORT_SYMBOL(ei_close);
 
 irqreturn_t ei_interrupt(int irq, void *dev_id)
 {
 	return __ei_interrupt(irq, dev_id);
 }
+EXPORT_SYMBOL(ei_interrupt);
 
 #ifdef CONFIG_NET_POLL_CONTROLLER
 void ei_poll(struct net_device *dev)
 {
 	__ei_poll(dev);
 }
+EXPORT_SYMBOL(ei_poll);
 #endif
 
 struct net_device *__alloc_ei_netdev(int size)
 {
 	return ____alloc_ei_netdev(size);
 }
+EXPORT_SYMBOL(__alloc_ei_netdev);
 
 void NS8390_init(struct net_device *dev, int startp)
 {
 	__NS8390_init(dev, startp);
 }
-
-EXPORT_SYMBOL(ei_open);
-EXPORT_SYMBOL(ei_close);
-EXPORT_SYMBOL(ei_interrupt);
-#ifdef CONFIG_NET_POLL_CONTROLLER
-EXPORT_SYMBOL(ei_poll);
-#endif
 EXPORT_SYMBOL(NS8390_init);
-EXPORT_SYMBOL(__alloc_ei_netdev);
 
 #if defined(MODULE)
 
diff --git a/drivers/net/8390p.c b/drivers/net/8390p.c
index 71f19884c4b1..4c6eea4611a2 100644
--- a/drivers/net/8390p.c
+++ b/drivers/net/8390p.c
@@ -4,9 +4,9 @@ static const char version[] =
     "8390p.c:v1.10cvs 9/23/94 Donald Becker (becker@cesdis.gsfc.nasa.gov)\n";
 
 #define ei_inb(_p)	inb(_p)
-#define ei_outb(_v,_p)	outb(_v,_p)
+#define ei_outb(_v, _p)	outb(_v, _p)
 #define ei_inb_p(_p)	inb_p(_p)
-#define ei_outb_p(_v,_p) outb_p(_v,_p)
+#define ei_outb_p(_v, _p) outb_p(_v, _p)
 
 #include "lib8390.c"
 
@@ -14,42 +14,39 @@ int eip_open(struct net_device *dev)
 {
 	return __ei_open(dev);
 }
+EXPORT_SYMBOL(eip_open);
 
 int eip_close(struct net_device *dev)
 {
 	return __ei_close(dev);
 }
+EXPORT_SYMBOL(eip_close);
 
 irqreturn_t eip_interrupt(int irq, void *dev_id)
 {
 	return __ei_interrupt(irq, dev_id);
 }
+EXPORT_SYMBOL(eip_interrupt);
 
 #ifdef CONFIG_NET_POLL_CONTROLLER
 void eip_poll(struct net_device *dev)
 {
 	__ei_poll(dev);
 }
+EXPORT_SYMBOL(eip_poll);
 #endif
 
 struct net_device *__alloc_eip_netdev(int size)
 {
 	return ____alloc_ei_netdev(size);
 }
+EXPORT_SYMBOL(__alloc_eip_netdev);
 
 void NS8390p_init(struct net_device *dev, int startp)
 {
-	return __NS8390_init(dev, startp);
+	__NS8390_init(dev, startp);
 }
-
-EXPORT_SYMBOL(eip_open);
-EXPORT_SYMBOL(eip_close);
-EXPORT_SYMBOL(eip_interrupt);
-#ifdef CONFIG_NET_POLL_CONTROLLER
-EXPORT_SYMBOL(eip_poll);
-#endif
 EXPORT_SYMBOL(NS8390p_init);
-EXPORT_SYMBOL(__alloc_eip_netdev);
 
 #if defined(MODULE)
 
diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index fa533c27052a..4a11296a9514 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -510,14 +510,15 @@ config STNIC
 config SH_ETH
 	tristate "Renesas SuperH Ethernet support"
 	depends on SUPERH && \
-		(CPU_SUBTYPE_SH7710 || CPU_SUBTYPE_SH7712)
+		(CPU_SUBTYPE_SH7710 || CPU_SUBTYPE_SH7712 || CPU_SUBTYPE_SH7763 || \
+		 CPU_SUBTYPE_SH7619)
 	select CRC32
 	select MII
 	select MDIO_BITBANG
 	select PHYLIB
 	help
 	  Renesas SuperH Ethernet device driver.
-	  This driver support SH7710 and SH7712.
+	  This driver support SH7710, SH7712, SH7763 and SH7619.
 
 config SUNLANCE
 	tristate "Sun LANCE support"
@@ -821,14 +822,14 @@ config ULTRA32
 	  will be called smc-ultra32.
 
 config BFIN_MAC
-	tristate "Blackfin 527/536/537 on-chip mac support"
-	depends on NET_ETHERNET && (BF527 || BF537 || BF536)
+	tristate "Blackfin on-chip MAC support"
+	depends on NET_ETHERNET && (BF526 || BF527 || BF536 || BF537)
 	select CRC32
 	select MII
 	select PHYLIB
 	select BFIN_MAC_USE_L1 if DMA_UNCACHED_NONE
 	help
-	  This is the driver for blackfin on-chip mac device. Say Y if you want it
+	  This is the driver for Blackfin on-chip mac device. Say Y if you want it
 	  compiled into the kernel. This driver is also available as a module
 	  ( = code which can be inserted in and removed from the running kernel
 	  whenever you want). The module will be called bfin_mac.
@@ -1171,7 +1172,7 @@ config ETH16I
 
 config NE2000
 	tristate "NE2000/NE1000 support"
-	depends on NET_ISA || (Q40 && m) || M32R || TOSHIBA_RBTX4927 || TOSHIBA_RBTX4938
+	depends on NET_ISA || (Q40 && m) || M32R || MACH_TX49XX
 	select CRC32
 	---help---
 	  If you have a network (Ethernet) card of this type, say Y and read
diff --git a/drivers/net/acenic.c b/drivers/net/acenic.c
index e4483de84e7f..66de80b64b92 100644
--- a/drivers/net/acenic.c
+++ b/drivers/net/acenic.c
@@ -52,7 +52,6 @@
 
 #include <linux/module.h>
 #include <linux/moduleparam.h>
-#include <linux/version.h>
 #include <linux/types.h>
 #include <linux/errno.h>
 #include <linux/ioport.h>
diff --git a/drivers/net/arm/am79c961a.c b/drivers/net/arm/am79c961a.c
index a637910b02dd..aa4a5246be53 100644
--- a/drivers/net/arm/am79c961a.c
+++ b/drivers/net/arm/am79c961a.c
@@ -28,7 +28,7 @@
 #include <linux/bitops.h>
 #include <linux/platform_device.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 #include <asm/system.h>
 
diff --git a/drivers/net/arm/at91_ether.c b/drivers/net/arm/at91_ether.c
index ffae266e2d7f..0fa53464efb2 100644
--- a/drivers/net/arm/at91_ether.c
+++ b/drivers/net/arm/at91_ether.c
@@ -32,9 +32,9 @@
 #include <asm/uaccess.h>
 #include <asm/mach-types.h>
 
-#include <asm/arch/at91rm9200_emac.h>
-#include <asm/arch/gpio.h>
-#include <asm/arch/board.h>
+#include <mach/at91rm9200_emac.h>
+#include <mach/gpio.h>
+#include <mach/board.h>
 
 #include "at91_ether.h"
 
diff --git a/drivers/net/arm/ep93xx_eth.c b/drivers/net/arm/ep93xx_eth.c
index 7a14980f3472..1267444d79da 100644
--- a/drivers/net/arm/ep93xx_eth.c
+++ b/drivers/net/arm/ep93xx_eth.c
@@ -20,8 +20,8 @@
 #include <linux/moduleparam.h>
 #include <linux/platform_device.h>
 #include <linux/delay.h>
-#include <asm/arch/ep93xx-regs.h>
-#include <asm/arch/platform.h>
+#include <mach/ep93xx-regs.h>
+#include <mach/platform.h>
 #include <asm/io.h>
 
 #define DRV_MODULE_NAME		"ep93xx-eth"
@@ -482,7 +482,7 @@ static int ep93xx_alloc_buffers(struct ep93xx_priv *ep)
 			goto err;
 
 		d = dma_map_single(NULL, page, PAGE_SIZE, DMA_FROM_DEVICE);
-		if (dma_mapping_error(d)) {
+		if (dma_mapping_error(NULL, d)) {
 			free_page((unsigned long)page);
 			goto err;
 		}
@@ -505,7 +505,7 @@ static int ep93xx_alloc_buffers(struct ep93xx_priv *ep)
 			goto err;
 
 		d = dma_map_single(NULL, page, PAGE_SIZE, DMA_TO_DEVICE);
-		if (dma_mapping_error(d)) {
+		if (dma_mapping_error(NULL, d)) {
 			free_page((unsigned long)page);
 			goto err;
 		}
diff --git a/drivers/net/arm/ixp4xx_eth.c b/drivers/net/arm/ixp4xx_eth.c
index 9b777d9433cd..e2d702b8b2e4 100644
--- a/drivers/net/arm/ixp4xx_eth.c
+++ b/drivers/net/arm/ixp4xx_eth.c
@@ -32,8 +32,8 @@
 #include <linux/kernel.h>
 #include <linux/mii.h>
 #include <linux/platform_device.h>
-#include <asm/arch/npe.h>
-#include <asm/arch/qmgr.h>
+#include <mach/npe.h>
+#include <mach/qmgr.h>
 
 #define DEBUG_QUEUES		0
 #define DEBUG_DESC		0
@@ -551,7 +551,7 @@ static int eth_poll(struct napi_struct *napi, int budget)
 		if ((skb = netdev_alloc_skb(dev, RX_BUFF_SIZE))) {
 			phys = dma_map_single(&dev->dev, skb->data,
 					      RX_BUFF_SIZE, DMA_FROM_DEVICE);
-			if (dma_mapping_error(phys)) {
+			if (dma_mapping_error(&dev->dev, phys)) {
 				dev_kfree_skb(skb);
 				skb = NULL;
 			}
@@ -698,7 +698,7 @@ static int eth_xmit(struct sk_buff *skb, struct net_device *dev)
 #endif
 
 	phys = dma_map_single(&dev->dev, mem, bytes, DMA_TO_DEVICE);
-	if (dma_mapping_error(phys)) {
+	if (dma_mapping_error(&dev->dev, phys)) {
 #ifdef __ARMEB__
 		dev_kfree_skb(skb);
 #else
@@ -883,7 +883,7 @@ static int init_queues(struct port *port)
 		desc->buf_len = MAX_MRU;
 		desc->data = dma_map_single(&port->netdev->dev, data,
 					    RX_BUFF_SIZE, DMA_FROM_DEVICE);
-		if (dma_mapping_error(desc->data)) {
+		if (dma_mapping_error(&port->netdev->dev, desc->data)) {
 			free_buffer(buff);
 			return -EIO;
 		}
diff --git a/drivers/net/atl1e/atl1e_ethtool.c b/drivers/net/atl1e/atl1e_ethtool.c
index cdc3b85b10b9..619c6583e1aa 100644
--- a/drivers/net/atl1e/atl1e_ethtool.c
+++ b/drivers/net/atl1e/atl1e_ethtool.c
@@ -355,7 +355,7 @@ static int atl1e_set_wol(struct net_device *netdev, struct ethtool_wolinfo *wol)
 	struct atl1e_adapter *adapter = netdev_priv(netdev);
 
 	if (wol->wolopts & (WAKE_ARP | WAKE_MAGICSECURE |
-			    WAKE_MCAST | WAKE_BCAST | WAKE_MCAST))
+			    WAKE_UCAST | WAKE_MCAST | WAKE_BCAST))
 		return -EOPNOTSUPP;
 	/* these settings will always override what we currently have */
 	adapter->wol = 0;
diff --git a/drivers/net/atl1e/atl1e_main.c b/drivers/net/atl1e/atl1e_main.c
index 35264c244cfd..7685b995ff9b 100644
--- a/drivers/net/atl1e/atl1e_main.c
+++ b/drivers/net/atl1e/atl1e_main.c
@@ -47,7 +47,7 @@ MODULE_DESCRIPTION("Atheros 1000M Ethernet Network Driver");
 MODULE_LICENSE("GPL");
 MODULE_VERSION(DRV_VERSION);
 
-static inline void atl1e_setup_mac_ctrl(struct atl1e_adapter *adapter);
+static void atl1e_setup_mac_ctrl(struct atl1e_adapter *adapter);
 
 static const u16
 atl1e_rx_page_vld_regs[AT_MAX_RECEIVE_QUEUE][AT_PAGE_NUM_PER_QUEUE] =
@@ -1037,7 +1037,7 @@ static inline void atl1e_configure_dma(struct atl1e_adapter *adapter)
 	return;
 }
 
-static inline void atl1e_setup_mac_ctrl(struct atl1e_adapter *adapter)
+static void atl1e_setup_mac_ctrl(struct atl1e_adapter *adapter)
 {
 	u32 value;
 	struct atl1e_hw *hw = &adapter->hw;
@@ -2232,10 +2232,11 @@ static int atl1e_resume(struct pci_dev *pdev)
 
 	AT_WRITE_REG(&adapter->hw, REG_WOL_CTRL, 0);
 
-	if (netif_running(netdev))
+	if (netif_running(netdev)) {
 		err = atl1e_request_irq(adapter);
 		if (err)
 			return err;
+	}
 
 	atl1e_reset_hw(&adapter->hw);
 
diff --git a/drivers/net/atlx/atl1.c b/drivers/net/atlx/atl1.c
index f12e3d12474b..e23ce77712f1 100644
--- a/drivers/net/atlx/atl1.c
+++ b/drivers/net/atlx/atl1.c
@@ -1790,6 +1790,17 @@ static void atl1_rx_checksum(struct atl1_adapter *adapter,
 {
 	struct pci_dev *pdev = adapter->pdev;
 
+	/*
+	 * The L1 hardware contains a bug that erroneously sets the
+	 * PACKET_FLAG_ERR and ERR_FLAG_L4_CHKSUM bits whenever a
+	 * fragmented IP packet is received, even though the packet
+	 * is perfectly valid and its checksum is correct. There's
+	 * no way to distinguish between one of these good packets
+	 * and a packet that actually contains a TCP/UDP checksum
+	 * error, so all we can do is allow it to be handed up to
+	 * the higher layers and let it be sorted out there.
+	 */
+
 	skb->ip_summed = CHECKSUM_NONE;
 
 	if (unlikely(rrd->pkt_flg & PACKET_FLAG_ERR)) {
@@ -1816,14 +1827,6 @@ static void atl1_rx_checksum(struct atl1_adapter *adapter,
 		return;
 	}
 
-	/* IPv4, but hardware thinks its checksum is wrong */
-	if (netif_msg_rx_err(adapter))
-		dev_printk(KERN_DEBUG, &pdev->dev,
-			"hw csum wrong, pkt_flag:%x, err_flag:%x\n",
-			rrd->pkt_flg, rrd->err_flg);
-	skb->ip_summed = CHECKSUM_COMPLETE;
-	skb->csum = htons(rrd->xsz.xsum_sz.rx_chksum);
-	adapter->hw_csum_err++;
 	return;
 }
 
@@ -3019,7 +3022,6 @@ static int __devinit atl1_probe(struct pci_dev *pdev,
 	netdev->features = NETIF_F_HW_CSUM;
 	netdev->features |= NETIF_F_SG;
 	netdev->features |= (NETIF_F_HW_VLAN_TX | NETIF_F_HW_VLAN_RX);
-	netdev->features |= NETIF_F_TSO;
 	netdev->features |= NETIF_F_LLTX;
 
 	/*
diff --git a/drivers/net/atp.c b/drivers/net/atp.c
index 3d4433358a36..c10cd8058e23 100644
--- a/drivers/net/atp.c
+++ b/drivers/net/atp.c
@@ -854,14 +854,9 @@ static void set_rx_mode_8002(struct net_device *dev)
 	struct net_local *lp = netdev_priv(dev);
 	long ioaddr = dev->base_addr;
 
-	if ( dev->mc_count > 0 || (dev->flags & (IFF_ALLMULTI|IFF_PROMISC))) {
-		/* We must make the kernel realise we had to move
-		 *	into promisc mode or we start all out war on
-		 *	the cable. - AC
-		 */
-		dev->flags|=IFF_PROMISC;
+	if (dev->mc_count > 0 || (dev->flags & (IFF_ALLMULTI|IFF_PROMISC)))
 		lp->addr_mode = CMR2h_PROMISC;
-	} else
+	else
 		lp->addr_mode = CMR2h_Normal;
 	write_reg_high(ioaddr, CMR2, lp->addr_mode);
 }
diff --git a/drivers/net/au1000_eth.c b/drivers/net/au1000_eth.c
index cb8be490e5ae..5ee1b0557a02 100644
--- a/drivers/net/au1000_eth.c
+++ b/drivers/net/au1000_eth.c
@@ -807,7 +807,7 @@ err_out:
 static int au1000_init(struct net_device *dev)
 {
 	struct au1000_private *aup = (struct au1000_private *) dev->priv;
-	u32 flags;
+	unsigned long flags;
 	int i;
 	u32 control;
 
diff --git a/drivers/net/ax88796.c b/drivers/net/ax88796.c
index 0b4adf4a0f7d..a886a4b9f7e5 100644
--- a/drivers/net/ax88796.c
+++ b/drivers/net/ax88796.c
@@ -554,7 +554,7 @@ static int ax_get_settings(struct net_device *dev, struct ethtool_cmd *cmd)
 
 	spin_lock_irqsave(&ax->mii_lock, flags);
 	mii_ethtool_gset(&ax->mii, cmd);
-	spin_lock_irqsave(&ax->mii_lock, flags);
+	spin_unlock_irqrestore(&ax->mii_lock, flags);
 
 	return 0;
 }
@@ -567,7 +567,7 @@ static int ax_set_settings(struct net_device *dev, struct ethtool_cmd *cmd)
 
 	spin_lock_irqsave(&ax->mii_lock, flags);
 	rc = mii_ethtool_sset(&ax->mii, cmd);
-	spin_lock_irqsave(&ax->mii_lock, flags);
+	spin_unlock_irqrestore(&ax->mii_lock, flags);
 
 	return rc;
 }
diff --git a/drivers/net/bfin_mac.c b/drivers/net/bfin_mac.c
index a8ec60e1ed75..3db7db1828e7 100644
--- a/drivers/net/bfin_mac.c
+++ b/drivers/net/bfin_mac.c
@@ -605,36 +605,87 @@ adjust_head:
 static int bfin_mac_hard_start_xmit(struct sk_buff *skb,
 				struct net_device *dev)
 {
-	unsigned int data;
+	u16 *data;
 
 	current_tx_ptr->skb = skb;
 
-	/*
-	 * Is skb->data always 16-bit aligned?
-	 * Do we need to memcpy((char *)(tail->packet + 2), skb->data, len)?
-	 */
-	if ((((unsigned int)(skb->data)) & 0x02) == 2) {
-		/* move skb->data to current_tx_ptr payload */
-		data = (unsigned int)(skb->data) - 2;
-		*((unsigned short *)data) = (unsigned short)(skb->len);
-		current_tx_ptr->desc_a.start_addr = (unsigned long)data;
-		/* this is important! */
-		blackfin_dcache_flush_range(data, (data + (skb->len)) + 2);
-
+	if (ANOMALY_05000285) {
+		/*
+		 * TXDWA feature is not avaible to older revision < 0.3 silicon
+		 * of BF537
+		 *
+		 * Only if data buffer is ODD WORD alignment, we do not
+		 * need to memcpy
+		 */
+		u32 data_align = (u32)(skb->data) & 0x3;
+		if (data_align == 0x2) {
+			/* move skb->data to current_tx_ptr payload */
+			data = (u16 *)(skb->data) - 1;
+			*data = (u16)(skb->len);
+			current_tx_ptr->desc_a.start_addr = (u32)data;
+			/* this is important! */
+			blackfin_dcache_flush_range((u32)data,
+					(u32)((u8 *)data + skb->len + 4));
+		} else {
+			*((u16 *)(current_tx_ptr->packet)) = (u16)(skb->len);
+			memcpy((u8 *)(current_tx_ptr->packet + 2), skb->data,
+				skb->len);
+			current_tx_ptr->desc_a.start_addr =
+				(u32)current_tx_ptr->packet;
+			if (current_tx_ptr->status.status_word != 0)
+				current_tx_ptr->status.status_word = 0;
+			blackfin_dcache_flush_range(
+				(u32)current_tx_ptr->packet,
+				(u32)(current_tx_ptr->packet + skb->len + 2));
+		}
 	} else {
-		*((unsigned short *)(current_tx_ptr->packet)) =
-		    (unsigned short)(skb->len);
-		memcpy((char *)(current_tx_ptr->packet + 2), skb->data,
-		       (skb->len));
-		current_tx_ptr->desc_a.start_addr =
-		    (unsigned long)current_tx_ptr->packet;
-		if (current_tx_ptr->status.status_word != 0)
-			current_tx_ptr->status.status_word = 0;
-		blackfin_dcache_flush_range((unsigned int)current_tx_ptr->
-					    packet,
-					    (unsigned int)(current_tx_ptr->
-							   packet + skb->len) +
-					    2);
+		/*
+		 * TXDWA feature is avaible to revision < 0.3 silicon of
+		 * BF537 and always avaible to BF52x
+		 */
+		u32 data_align = (u32)(skb->data) & 0x3;
+		if (data_align == 0x0) {
+			u16 sysctl = bfin_read_EMAC_SYSCTL();
+			sysctl |= TXDWA;
+			bfin_write_EMAC_SYSCTL(sysctl);
+
+			/* move skb->data to current_tx_ptr payload */
+			data = (u16 *)(skb->data) - 2;
+			*data = (u16)(skb->len);
+			current_tx_ptr->desc_a.start_addr = (u32)data;
+			/* this is important! */
+			blackfin_dcache_flush_range(
+					(u32)data,
+					(u32)((u8 *)data + skb->len + 4));
+		} else if (data_align == 0x2) {
+			u16 sysctl = bfin_read_EMAC_SYSCTL();
+			sysctl &= ~TXDWA;
+			bfin_write_EMAC_SYSCTL(sysctl);
+
+			/* move skb->data to current_tx_ptr payload */
+			data = (u16 *)(skb->data) - 1;
+			*data = (u16)(skb->len);
+			current_tx_ptr->desc_a.start_addr = (u32)data;
+			/* this is important! */
+			blackfin_dcache_flush_range(
+					(u32)data,
+					(u32)((u8 *)data + skb->len + 4));
+		} else {
+			u16 sysctl = bfin_read_EMAC_SYSCTL();
+			sysctl &= ~TXDWA;
+			bfin_write_EMAC_SYSCTL(sysctl);
+
+			*((u16 *)(current_tx_ptr->packet)) = (u16)(skb->len);
+			memcpy((u8 *)(current_tx_ptr->packet + 2), skb->data,
+				skb->len);
+			current_tx_ptr->desc_a.start_addr =
+				(u32)current_tx_ptr->packet;
+			if (current_tx_ptr->status.status_word != 0)
+				current_tx_ptr->status.status_word = 0;
+			blackfin_dcache_flush_range(
+				(u32)current_tx_ptr->packet,
+				(u32)(current_tx_ptr->packet + skb->len + 2));
+		}
 	}
 
 	/* enable this packet's dma */
@@ -691,7 +742,6 @@ static void bfin_mac_rx(struct net_device *dev)
 					 (unsigned long)skb->tail);
 
 	dev->last_rx = jiffies;
-	skb->dev = dev;
 	skb->protocol = eth_type_trans(skb, dev);
 #if defined(BFIN_MAC_CSUM_OFFLOAD)
 	skb->csum = current_rx_ptr->status.ip_payload_csum;
@@ -920,6 +970,7 @@ static int bfin_mac_open(struct net_device *dev)
 	phy_start(lp->phydev);
 	phy_write(lp->phydev, MII_BMCR, BMCR_RESET);
 	setup_system_regs(dev);
+	setup_mac_addr(dev->dev_addr);
 	bfin_mac_disable();
 	bfin_mac_enable();
 	pr_debug("hardware init finished\n");
@@ -955,7 +1006,7 @@ static int bfin_mac_close(struct net_device *dev)
 	return 0;
 }
 
-static int __init bfin_mac_probe(struct platform_device *pdev)
+static int __devinit bfin_mac_probe(struct platform_device *pdev)
 {
 	struct net_device *ndev;
 	struct bfin_mac_local *lp;
@@ -1081,7 +1132,7 @@ out_err_probe_mac:
 	return rc;
 }
 
-static int bfin_mac_remove(struct platform_device *pdev)
+static int __devexit bfin_mac_remove(struct platform_device *pdev)
 {
 	struct net_device *ndev = platform_get_drvdata(pdev);
 	struct bfin_mac_local *lp = netdev_priv(ndev);
@@ -1128,7 +1179,7 @@ static int bfin_mac_resume(struct platform_device *pdev)
 
 static struct platform_driver bfin_mac_driver = {
 	.probe = bfin_mac_probe,
-	.remove = bfin_mac_remove,
+	.remove = __devexit_p(bfin_mac_remove),
 	.resume = bfin_mac_resume,
 	.suspend = bfin_mac_suspend,
 	.driver = {
diff --git a/drivers/net/bnx2.c b/drivers/net/bnx2.c
index 5ebde67d4297..2486a656f12d 100644
--- a/drivers/net/bnx2.c
+++ b/drivers/net/bnx2.c
@@ -35,8 +35,8 @@
 #include <linux/time.h>
 #include <linux/ethtool.h>
 #include <linux/mii.h>
-#ifdef NETIF_F_HW_VLAN_TX
 #include <linux/if_vlan.h>
+#if defined(CONFIG_VLAN_8021Q) || defined(CONFIG_VLAN_8021Q_MODULE)
 #define BCM_VLAN 1
 #endif
 #include <net/ip.h>
@@ -57,8 +57,8 @@
 
 #define DRV_MODULE_NAME		"bnx2"
 #define PFX DRV_MODULE_NAME	": "
-#define DRV_MODULE_VERSION	"1.7.9"
-#define DRV_MODULE_RELDATE	"July 18, 2008"
+#define DRV_MODULE_VERSION	"1.8.0"
+#define DRV_MODULE_RELDATE	"Aug 14, 2008"
 
 #define RUN_AT(x) (jiffies + (x))
 
@@ -2876,6 +2876,8 @@ bnx2_rx_int(struct bnx2 *bp, struct bnx2_napi *bnapi, int budget)
 		struct sw_bd *rx_buf;
 		struct sk_buff *skb;
 		dma_addr_t dma_addr;
+		u16 vtag = 0;
+		int hw_vlan __maybe_unused = 0;
 
 		sw_ring_cons = RX_RING_IDX(sw_cons);
 		sw_ring_prod = RX_RING_IDX(sw_prod);
@@ -2919,7 +2921,7 @@ bnx2_rx_int(struct bnx2 *bp, struct bnx2_napi *bnapi, int budget)
 		if (len <= bp->rx_copy_thresh) {
 			struct sk_buff *new_skb;
 
-			new_skb = netdev_alloc_skb(bp->dev, len + 2);
+			new_skb = netdev_alloc_skb(bp->dev, len + 6);
 			if (new_skb == NULL) {
 				bnx2_reuse_rx_skb(bp, rxr, skb, sw_ring_cons,
 						  sw_ring_prod);
@@ -2928,9 +2930,9 @@ bnx2_rx_int(struct bnx2 *bp, struct bnx2_napi *bnapi, int budget)
 
 			/* aligned copy */
 			skb_copy_from_linear_data_offset(skb,
-							 BNX2_RX_OFFSET - 2,
-				      new_skb->data, len + 2);
-			skb_reserve(new_skb, 2);
+							 BNX2_RX_OFFSET - 6,
+				      new_skb->data, len + 6);
+			skb_reserve(new_skb, 6);
 			skb_put(new_skb, len);
 
 			bnx2_reuse_rx_skb(bp, rxr, skb,
@@ -2941,6 +2943,25 @@ bnx2_rx_int(struct bnx2 *bp, struct bnx2_napi *bnapi, int budget)
 			   dma_addr, (sw_ring_cons << 16) | sw_ring_prod)))
 			goto next_rx;
 
+		if ((status & L2_FHDR_STATUS_L2_VLAN_TAG) &&
+		    !(bp->rx_mode & BNX2_EMAC_RX_MODE_KEEP_VLAN_TAG)) {
+			vtag = rx_hdr->l2_fhdr_vlan_tag;
+#ifdef BCM_VLAN
+			if (bp->vlgrp)
+				hw_vlan = 1;
+			else
+#endif
+			{
+				struct vlan_ethhdr *ve = (struct vlan_ethhdr *)
+					__skb_push(skb, 4);
+
+				memmove(ve, skb->data + 4, ETH_ALEN * 2);
+				ve->h_vlan_proto = htons(ETH_P_8021Q);
+				ve->h_vlan_TCI = htons(vtag);
+				len += 4;
+			}
+		}
+
 		skb->protocol = eth_type_trans(skb, bp->dev);
 
 		if ((len > (bp->dev->mtu + ETH_HLEN)) &&
@@ -2962,10 +2983,8 @@ bnx2_rx_int(struct bnx2 *bp, struct bnx2_napi *bnapi, int budget)
 		}
 
 #ifdef BCM_VLAN
-		if ((status & L2_FHDR_STATUS_L2_VLAN_TAG) && bp->vlgrp) {
-			vlan_hwaccel_receive_skb(skb, bp->vlgrp,
-				rx_hdr->l2_fhdr_vlan_tag);
-		}
+		if (hw_vlan)
+			vlan_hwaccel_receive_skb(skb, bp->vlgrp, vtag);
 		else
 #endif
 			netif_receive_skb(skb);
@@ -3237,10 +3256,10 @@ bnx2_set_rx_mode(struct net_device *dev)
 				  BNX2_EMAC_RX_MODE_KEEP_VLAN_TAG);
 	sort_mode = 1 | BNX2_RPM_SORT_USER0_BC_EN;
 #ifdef BCM_VLAN
-	if (!bp->vlgrp && !(bp->flags & BNX2_FLAG_ASF_ENABLE))
+	if (!bp->vlgrp && (bp->flags & BNX2_FLAG_CAN_KEEP_VLAN))
 		rx_mode |= BNX2_EMAC_RX_MODE_KEEP_VLAN_TAG;
 #else
-	if (!(bp->flags & BNX2_FLAG_ASF_ENABLE))
+	if (bp->flags & BNX2_FLAG_CAN_KEEP_VLAN)
 		rx_mode |= BNX2_EMAC_RX_MODE_KEEP_VLAN_TAG;
 #endif
 	if (dev->flags & IFF_PROMISC) {
@@ -5963,10 +5982,12 @@ bnx2_start_xmit(struct sk_buff *skb, struct net_device *dev)
 		vlan_tag_flags |= TX_BD_FLAGS_TCP_UDP_CKSUM;
 	}
 
+#ifdef BCM_VLAN
 	if (bp->vlgrp && vlan_tx_tag_present(skb)) {
 		vlan_tag_flags |=
 			(TX_BD_FLAGS_VLAN_TAG | (vlan_tx_tag_get(skb) << 16));
 	}
+#endif
 	if ((mss = skb_shinfo(skb)->gso_size)) {
 		u32 tcp_opt_len, ip_tcp_len;
 		struct iphdr *iph;
diff --git a/drivers/net/bnx2x.h b/drivers/net/bnx2x.h
index 4bf4f7b205f2..fd705d1295a7 100644
--- a/drivers/net/bnx2x.h
+++ b/drivers/net/bnx2x.h
@@ -40,20 +40,20 @@
 #define DP(__mask, __fmt, __args...) do { \
 	if (bp->msglevel & (__mask)) \
 		printk(DP_LEVEL "[%s:%d(%s)]" __fmt, __func__, __LINE__, \
-			bp->dev?(bp->dev->name):"?", ##__args); \
+			bp->dev ? (bp->dev->name) : "?", ##__args); \
 	} while (0)
 
 /* errors debug print */
 #define BNX2X_DBG_ERR(__fmt, __args...) do { \
 	if (bp->msglevel & NETIF_MSG_PROBE) \
 		printk(KERN_ERR "[%s:%d(%s)]" __fmt, __func__, __LINE__, \
-			bp->dev?(bp->dev->name):"?", ##__args); \
+			bp->dev ? (bp->dev->name) : "?", ##__args); \
 	} while (0)
 
 /* for errors (never masked) */
 #define BNX2X_ERR(__fmt, __args...) do { \
 	printk(KERN_ERR "[%s:%d(%s)]" __fmt, __func__, __LINE__, \
-		bp->dev?(bp->dev->name):"?", ##__args); \
+		bp->dev ? (bp->dev->name) : "?", ##__args); \
 	} while (0)
 
 /* before we have a dev->name use dev_info() */
@@ -120,16 +120,8 @@
 #define SHMEM_RD(bp, field)		REG_RD(bp, SHMEM_ADDR(bp, field))
 #define SHMEM_WR(bp, field, val)	REG_WR(bp, SHMEM_ADDR(bp, field), val)
 
-#define NIG_WR(reg, val)	REG_WR(bp, reg, val)
-#define EMAC_WR(reg, val)	REG_WR(bp, emac_base + reg, val)
-#define BMAC_WR(reg, val)	REG_WR(bp, GRCBASE_NIG + bmac_addr + reg, val)
-
-
-#define for_each_queue(bp, var)	for (var = 0; var < bp->num_queues; var++)
-
-#define for_each_nondefault_queue(bp, var) \
-				for (var = 1; var < bp->num_queues; var++)
-#define is_multi(bp)		(bp->num_queues > 1)
+#define EMAC_RD(bp, reg)		REG_RD(bp, emac_base + reg)
+#define EMAC_WR(bp, reg, val)		REG_WR(bp, emac_base + reg, val)
 
 
 /* fast path */
@@ -159,11 +151,13 @@ struct sw_rx_page {
 #define PAGES_PER_SGE_SHIFT		0
 #define PAGES_PER_SGE			(1 << PAGES_PER_SGE_SHIFT)
 
+#define BCM_RX_ETH_PAYLOAD_ALIGN	64
+
 /* SGE ring related macros */
 #define NUM_RX_SGE_PAGES		2
 #define RX_SGE_CNT		(BCM_PAGE_SIZE / sizeof(struct eth_rx_sge))
 #define MAX_RX_SGE_CNT			(RX_SGE_CNT - 2)
-/* RX_SGE_CNT is promissed to be a power of 2 */
+/* RX_SGE_CNT is promised to be a power of 2 */
 #define RX_SGE_MASK			(RX_SGE_CNT - 1)
 #define NUM_RX_SGE			(RX_SGE_CNT * NUM_RX_SGE_PAGES)
 #define MAX_RX_SGE			(NUM_RX_SGE - 1)
@@ -258,8 +252,7 @@ struct bnx2x_fastpath {
 
 	unsigned long		tx_pkt,
 				rx_pkt,
-				rx_calls,
-				rx_alloc_failed;
+				rx_calls;
 	/* TPA related */
 	struct sw_rx_bd		tpa_pool[ETH_MAX_AGGREGATION_QUEUES_E1H];
 	u8			tpa_state[ETH_MAX_AGGREGATION_QUEUES_E1H];
@@ -275,6 +268,15 @@ struct bnx2x_fastpath {
 
 #define bnx2x_fp(bp, nr, var)		(bp->fp[nr].var)
 
+#define BNX2X_HAS_TX_WORK(fp) \
+			((fp->tx_pkt_prod != le16_to_cpu(*fp->tx_cons_sb)) || \
+			 (fp->tx_pkt_prod != fp->tx_pkt_cons))
+
+#define BNX2X_HAS_RX_WORK(fp) \
+			(fp->rx_comp_cons != rx_cons_sb)
+
+#define BNX2X_HAS_WORK(fp)	(BNX2X_HAS_RX_WORK(fp) || BNX2X_HAS_TX_WORK(fp))
+
 
 /* MC hsi */
 #define MAX_FETCH_BD			13	/* HW max BDs per packet */
@@ -317,7 +319,7 @@ struct bnx2x_fastpath {
 #define RCQ_BD(x)			((x) & MAX_RCQ_BD)
 
 
-/* This is needed for determening of last_max */
+/* This is needed for determining of last_max */
 #define SUB_S16(a, b)			(s16)((s16)(a) - (s16)(b))
 
 #define __SGE_MASK_SET_BIT(el, bit) \
@@ -386,20 +388,28 @@ struct bnx2x_fastpath {
 #define TPA_TYPE(cqe_fp_flags)		((cqe_fp_flags) & \
 					 (TPA_TYPE_START | TPA_TYPE_END))
 
-#define BNX2X_RX_SUM_OK(cqe) \
-			(!(cqe->fast_path_cqe.status_flags & \
-			 (ETH_FAST_PATH_RX_CQE_IP_XSUM_NO_VALIDATION_FLG | \
-			  ETH_FAST_PATH_RX_CQE_L4_XSUM_NO_VALIDATION_FLG)))
+#define ETH_RX_ERROR_FALGS		ETH_FAST_PATH_RX_CQE_PHY_DECODE_ERR_FLG
+
+#define BNX2X_IP_CSUM_ERR(cqe) \
+			(!((cqe)->fast_path_cqe.status_flags & \
+			   ETH_FAST_PATH_RX_CQE_IP_XSUM_NO_VALIDATION_FLG) && \
+			 ((cqe)->fast_path_cqe.type_error_flags & \
+			  ETH_FAST_PATH_RX_CQE_IP_BAD_XSUM_FLG))
+
+#define BNX2X_L4_CSUM_ERR(cqe) \
+			(!((cqe)->fast_path_cqe.status_flags & \
+			   ETH_FAST_PATH_RX_CQE_L4_XSUM_NO_VALIDATION_FLG) && \
+			 ((cqe)->fast_path_cqe.type_error_flags & \
+			  ETH_FAST_PATH_RX_CQE_L4_BAD_XSUM_FLG))
+
+#define BNX2X_RX_CSUM_OK(cqe) \
+			(!(BNX2X_L4_CSUM_ERR(cqe) || BNX2X_IP_CSUM_ERR(cqe)))
 
 #define BNX2X_RX_SUM_FIX(cqe) \
 			((le16_to_cpu(cqe->fast_path_cqe.pars_flags.flags) & \
 			  PARSING_FLAGS_OVER_ETHERNET_PROTOCOL) == \
 			 (1 << PARSING_FLAGS_OVER_ETHERNET_PROTOCOL_SHIFT))
 
-#define ETH_RX_ERROR_FALGS	(ETH_FAST_PATH_RX_CQE_PHY_DECODE_ERR_FLG | \
-				 ETH_FAST_PATH_RX_CQE_IP_BAD_XSUM_FLG | \
-				 ETH_FAST_PATH_RX_CQE_L4_BAD_XSUM_FLG)
-
 
 #define FP_USB_FUNC_OFF			(2 + 2*HC_USTORM_SB_NUM_INDICES)
 #define FP_CSB_FUNC_OFF			(2 + 2*HC_CSTORM_SB_NUM_INDICES)
@@ -647,6 +657,8 @@ struct bnx2x_eth_stats {
 
 	u32 brb_drop_hi;
 	u32 brb_drop_lo;
+	u32 brb_truncate_hi;
+	u32 brb_truncate_lo;
 
 	u32 jabber_packets_received;
 
@@ -663,6 +675,9 @@ struct bnx2x_eth_stats {
 	u32 mac_discard;
 
 	u32 driver_xoff;
+	u32 rx_err_discard_pkt;
+	u32 rx_skb_alloc_failed;
+	u32 hw_csum_err;
 };
 
 #define STATS_OFFSET32(stat_name) \
@@ -737,8 +752,7 @@ struct bnx2x {
 
 	u32			rx_csum;
 	u32			rx_offset;
-	u32			rx_buf_use_size;	/* useable size */
-	u32			rx_buf_size;		/* with alignment */
+	u32			rx_buf_size;
 #define ETH_OVREHEAD			(ETH_HLEN + 8)	/* 8 for CRC + VLAN */
 #define ETH_MIN_PACKET_SIZE		60
 #define ETH_MAX_PACKET_SIZE		1500
@@ -753,7 +767,6 @@ struct bnx2x {
 	u16			def_att_idx;
 	u32			attn_state;
 	struct attn_route	attn_group[MAX_DYNAMIC_ATTN_GRPS];
-	u32			aeu_mask;
 	u32			nig_mask;
 
 	/* slow path ring */
@@ -772,7 +785,7 @@ struct bnx2x {
 	u8			stats_pending;
 	u8			set_mac_pending;
 
-	/* End of fileds used in the performance code paths */
+	/* End of fields used in the performance code paths */
 
 	int			panic;
 	int			msglevel;
@@ -794,9 +807,6 @@ struct bnx2x {
 #define BP_FUNC(bp)			(bp->func)
 #define BP_E1HVN(bp)			(bp->func >> 1)
 #define BP_L_ID(bp)			(BP_E1HVN(bp) << 2)
-/* assorted E1HVN */
-#define IS_E1HMF(bp)			(bp->e1hmf != 0)
-#define BP_MAX_QUEUES(bp)		(IS_E1HMF(bp) ? 4 : 16)
 
 	int			pm_cap;
 	int			pcie_cap;
@@ -821,6 +831,7 @@ struct bnx2x {
 	u32			mf_config;
 	u16			e1hov;
 	u8			e1hmf;
+#define IS_E1HMF(bp)			(bp->e1hmf != 0)
 
 	u8			wol;
 
@@ -836,7 +847,6 @@ struct bnx2x {
 	u16			rx_ticks_int;
 	u16			rx_ticks;
 
-	u32			stats_ticks;
 	u32			lin_cnt;
 
 	int			state;
@@ -852,6 +862,7 @@ struct bnx2x {
 #define BNX2X_STATE_ERROR		0xf000
 
 	int			num_queues;
+#define BP_MAX_QUEUES(bp)		(IS_E1HMF(bp) ? 4 : 16)
 
 	u32			rx_mode;
 #define BNX2X_RX_MODE_NONE		0
@@ -902,10 +913,17 @@ struct bnx2x {
 };
 
 
+#define for_each_queue(bp, var)	for (var = 0; var < bp->num_queues; var++)
+
+#define for_each_nondefault_queue(bp, var) \
+				for (var = 1; var < bp->num_queues; var++)
+#define is_multi(bp)		(bp->num_queues > 1)
+
+
 void bnx2x_read_dmae(struct bnx2x *bp, u32 src_addr, u32 len32);
 void bnx2x_write_dmae(struct bnx2x *bp, dma_addr_t dma_addr, u32 dst_addr,
 		      u32 len32);
-int bnx2x_set_gpio(struct bnx2x *bp, int gpio_num, u32 mode);
+int bnx2x_set_gpio(struct bnx2x *bp, int gpio_num, u32 mode, u8 port);
 
 static inline u32 reg_poll(struct bnx2x *bp, u32 reg, u32 expected, int ms,
 			   int wait)
@@ -976,7 +994,7 @@ static inline u32 reg_poll(struct bnx2x *bp, u32 reg, u32 expected, int ms,
 #define PCICFG_LINK_SPEED_SHIFT		16
 
 
-#define BNX2X_NUM_STATS			39
+#define BNX2X_NUM_STATS			42
 #define BNX2X_NUM_TESTS			8
 
 #define BNX2X_MAC_LOOPBACK		0
@@ -1007,10 +1025,10 @@ static inline u32 reg_poll(struct bnx2x *bp, u32 reg, u32 expected, int ms,
 /* resolution of the rate shaping timer - 100 usec */
 #define RS_PERIODIC_TIMEOUT_USEC	100
 /* resolution of fairness algorithm in usecs -
-   coefficient for clauclating the actuall t fair */
+   coefficient for calculating the actual t fair */
 #define T_FAIR_COEF			10000000
 /* number of bytes in single QM arbitration cycle -
-   coeffiecnt for calculating the fairness timer */
+   coefficient for calculating the fairness timer */
 #define QM_ARB_BYTES			40000
 #define FAIR_MEM			2
 
diff --git a/drivers/net/bnx2x_fw_defs.h b/drivers/net/bnx2x_fw_defs.h
index e3da7f69d27b..192fa981b930 100644
--- a/drivers/net/bnx2x_fw_defs.h
+++ b/drivers/net/bnx2x_fw_defs.h
@@ -9,165 +9,171 @@
 
 
 #define CSTORM_ASSERT_LIST_INDEX_OFFSET \
-	(IS_E1H_OFFSET? 0x7000 : 0x1000)
+	(IS_E1H_OFFSET ? 0x7000 : 0x1000)
 #define CSTORM_ASSERT_LIST_OFFSET(idx) \
-	(IS_E1H_OFFSET? (0x7020 + (idx * 0x10)) : (0x1020 + (idx * 0x10)))
+	(IS_E1H_OFFSET ? (0x7020 + (idx * 0x10)) : (0x1020 + (idx * 0x10)))
 #define CSTORM_DEF_SB_HC_DISABLE_OFFSET(function, index) \
-	(IS_E1H_OFFSET? (0x8522 + ((function>>1) * 0x40) + ((function&1) \
-	* 0x100) + (index * 0x4)) : (0x1922 + (function * 0x40) + (index \
-	* 0x4)))
+	(IS_E1H_OFFSET ? (0x8522 + ((function>>1) * 0x40) + \
+	((function&1) * 0x100) + (index * 0x4)) : (0x1922 + (function * \
+	0x40) + (index * 0x4)))
 #define CSTORM_DEF_SB_HOST_SB_ADDR_OFFSET(function) \
-	(IS_E1H_OFFSET? (0x8500 + ((function>>1) * 0x40) + ((function&1) \
-	* 0x100)) : (0x1900 + (function * 0x40)))
+	(IS_E1H_OFFSET ? (0x8500 + ((function>>1) * 0x40) + \
+	((function&1) * 0x100)) : (0x1900 + (function * 0x40)))
 #define CSTORM_DEF_SB_HOST_STATUS_BLOCK_OFFSET(function) \
-	(IS_E1H_OFFSET? (0x8508 + ((function>>1) * 0x40) + ((function&1) \
-	* 0x100)) : (0x1908 + (function * 0x40)))
+	(IS_E1H_OFFSET ? (0x8508 + ((function>>1) * 0x40) + \
+	((function&1) * 0x100)) : (0x1908 + (function * 0x40)))
 #define CSTORM_FUNCTION_MODE_OFFSET \
-	(IS_E1H_OFFSET? 0x11e8 : 0xffffffff)
+	(IS_E1H_OFFSET ? 0x11e8 : 0xffffffff)
 #define CSTORM_HC_BTR_OFFSET(port) \
-	(IS_E1H_OFFSET? (0x8704 + (port * 0xf0)) : (0x1984 + (port * 0xc0)))
+	(IS_E1H_OFFSET ? (0x8704 + (port * 0xf0)) : (0x1984 + (port * 0xc0)))
 #define CSTORM_SB_HC_DISABLE_OFFSET(port, cpu_id, index) \
-	(IS_E1H_OFFSET? (0x801a + (port * 0x280) + (cpu_id * 0x28) + \
+	(IS_E1H_OFFSET ? (0x801a + (port * 0x280) + (cpu_id * 0x28) + \
 	(index * 0x4)) : (0x141a + (port * 0x280) + (cpu_id * 0x28) + \
 	(index * 0x4)))
 #define CSTORM_SB_HC_TIMEOUT_OFFSET(port, cpu_id, index) \
-	(IS_E1H_OFFSET? (0x8018 + (port * 0x280) + (cpu_id * 0x28) + \
+	(IS_E1H_OFFSET ? (0x8018 + (port * 0x280) + (cpu_id * 0x28) + \
 	(index * 0x4)) : (0x1418 + (port * 0x280) + (cpu_id * 0x28) + \
 	(index * 0x4)))
 #define CSTORM_SB_HOST_SB_ADDR_OFFSET(port, cpu_id) \
-	(IS_E1H_OFFSET? (0x8000 + (port * 0x280) + (cpu_id * 0x28)) : \
+	(IS_E1H_OFFSET ? (0x8000 + (port * 0x280) + (cpu_id * 0x28)) : \
 	(0x1400 + (port * 0x280) + (cpu_id * 0x28)))
 #define CSTORM_SB_HOST_STATUS_BLOCK_OFFSET(port, cpu_id) \
-	(IS_E1H_OFFSET? (0x8008 + (port * 0x280) + (cpu_id * 0x28)) : \
+	(IS_E1H_OFFSET ? (0x8008 + (port * 0x280) + (cpu_id * 0x28)) : \
 	(0x1408 + (port * 0x280) + (cpu_id * 0x28)))
 #define CSTORM_STATS_FLAGS_OFFSET(function) \
-	(IS_E1H_OFFSET? (0x1108 + (function * 0x8)) : (0x5108 + \
+	(IS_E1H_OFFSET ? (0x1108 + (function * 0x8)) : (0x5108 + \
 	(function * 0x8)))
 #define TSTORM_APPROXIMATE_MATCH_MULTICAST_FILTERING_OFFSET(function) \
-	(IS_E1H_OFFSET? (0x31c0 + (function * 0x20)) : 0xffffffff)
+	(IS_E1H_OFFSET ? (0x31c0 + (function * 0x20)) : 0xffffffff)
 #define TSTORM_ASSERT_LIST_INDEX_OFFSET \
-	(IS_E1H_OFFSET? 0xa000 : 0x1000)
+	(IS_E1H_OFFSET ? 0xa000 : 0x1000)
 #define TSTORM_ASSERT_LIST_OFFSET(idx) \
-	(IS_E1H_OFFSET? (0xa020 + (idx * 0x10)) : (0x1020 + (idx * 0x10)))
+	(IS_E1H_OFFSET ? (0xa020 + (idx * 0x10)) : (0x1020 + (idx * 0x10)))
 #define TSTORM_CLIENT_CONFIG_OFFSET(port, client_id) \
-	(IS_E1H_OFFSET? (0x3358 + (port * 0x3e8) + (client_id * 0x28)) : \
-	(0x9c8 + (port * 0x2f8) + (client_id * 0x28)))
+	(IS_E1H_OFFSET ? (0x3358 + (port * 0x3e8) + (client_id * 0x28)) \
+	: (0x9c8 + (port * 0x2f8) + (client_id * 0x28)))
 #define TSTORM_DEF_SB_HC_DISABLE_OFFSET(function, index) \
-	(IS_E1H_OFFSET? (0xb01a + ((function>>1) * 0x28) + ((function&1) \
-	* 0xa0) + (index * 0x4)) : (0x141a + (function * 0x28) + (index * \
-	0x4)))
+	(IS_E1H_OFFSET ? (0xb01a + ((function>>1) * 0x28) + \
+	((function&1) * 0xa0) + (index * 0x4)) : (0x141a + (function * \
+	0x28) + (index * 0x4)))
 #define TSTORM_DEF_SB_HOST_SB_ADDR_OFFSET(function) \
-	(IS_E1H_OFFSET? (0xb000 + ((function>>1) * 0x28) + ((function&1) \
-	* 0xa0)) : (0x1400 + (function * 0x28)))
+	(IS_E1H_OFFSET ? (0xb000 + ((function>>1) * 0x28) + \
+	((function&1) * 0xa0)) : (0x1400 + (function * 0x28)))
 #define TSTORM_DEF_SB_HOST_STATUS_BLOCK_OFFSET(function) \
-	(IS_E1H_OFFSET? (0xb008 + ((function>>1) * 0x28) + ((function&1) \
-	* 0xa0)) : (0x1408 + (function * 0x28)))
+	(IS_E1H_OFFSET ? (0xb008 + ((function>>1) * 0x28) + \
+	((function&1) * 0xa0)) : (0x1408 + (function * 0x28)))
 #define TSTORM_ETH_STATS_QUERY_ADDR_OFFSET(function) \
-	(IS_E1H_OFFSET? (0x2b80 + (function * 0x8)) : (0x4b68 + \
+	(IS_E1H_OFFSET ? (0x2b80 + (function * 0x8)) : (0x4b68 + \
 	(function * 0x8)))
 #define TSTORM_FUNCTION_COMMON_CONFIG_OFFSET(function) \
-	(IS_E1H_OFFSET? (0x3000 + (function * 0x38)) : (0x1500 + \
+	(IS_E1H_OFFSET ? (0x3000 + (function * 0x38)) : (0x1500 + \
 	(function * 0x38)))
 #define TSTORM_FUNCTION_MODE_OFFSET \
-	(IS_E1H_OFFSET? 0x1ad0 : 0xffffffff)
+	(IS_E1H_OFFSET ? 0x1ad0 : 0xffffffff)
 #define TSTORM_HC_BTR_OFFSET(port) \
-	(IS_E1H_OFFSET? (0xb144 + (port * 0x30)) : (0x1454 + (port * 0x18)))
+	(IS_E1H_OFFSET ? (0xb144 + (port * 0x30)) : (0x1454 + (port * 0x18)))
 #define TSTORM_INDIRECTION_TABLE_OFFSET(function) \
-	(IS_E1H_OFFSET? (0x12c8 + (function * 0x80)) : (0x22c8 + \
+	(IS_E1H_OFFSET ? (0x12c8 + (function * 0x80)) : (0x22c8 + \
 	(function * 0x80)))
 #define TSTORM_INDIRECTION_TABLE_SIZE 0x80
 #define TSTORM_MAC_FILTER_CONFIG_OFFSET(function) \
-	(IS_E1H_OFFSET? (0x3008 + (function * 0x38)) : (0x1508 + \
+	(IS_E1H_OFFSET ? (0x3008 + (function * 0x38)) : (0x1508 + \
 	(function * 0x38)))
+#define TSTORM_PER_COUNTER_ID_STATS_OFFSET(port, stats_counter_id) \
+	(IS_E1H_OFFSET ? (0x2010 + (port * 0x5b0) + (stats_counter_id * \
+	0x50)) : (0x4000 + (port * 0x3f0) + (stats_counter_id * 0x38)))
 #define TSTORM_RX_PRODS_OFFSET(port, client_id) \
-	(IS_E1H_OFFSET? (0x3350 + (port * 0x3e8) + (client_id * 0x28)) : \
-	(0x9c0 + (port * 0x2f8) + (client_id * 0x28)))
+	(IS_E1H_OFFSET ? (0x3350 + (port * 0x3e8) + (client_id * 0x28)) \
+	: (0x9c0 + (port * 0x2f8) + (client_id * 0x28)))
 #define TSTORM_STATS_FLAGS_OFFSET(function) \
-	(IS_E1H_OFFSET? (0x2c00 + (function * 0x8)) : (0x4b88 + \
+	(IS_E1H_OFFSET ? (0x2c00 + (function * 0x8)) : (0x4b88 + \
 	(function * 0x8)))
-#define TSTORM_TPA_EXIST_OFFSET (IS_E1H_OFFSET? 0x3b30 : 0x1c20)
-#define USTORM_AGG_DATA_OFFSET (IS_E1H_OFFSET? 0xa040 : 0x2c10)
-#define USTORM_AGG_DATA_SIZE (IS_E1H_OFFSET? 0x2440 : 0x1200)
+#define TSTORM_TPA_EXIST_OFFSET (IS_E1H_OFFSET ? 0x3b30 : 0x1c20)
+#define USTORM_AGG_DATA_OFFSET (IS_E1H_OFFSET ? 0xa040 : 0x2c10)
+#define USTORM_AGG_DATA_SIZE (IS_E1H_OFFSET ? 0x2440 : 0x1200)
 #define USTORM_ASSERT_LIST_INDEX_OFFSET \
-	(IS_E1H_OFFSET? 0x8000 : 0x1000)
+	(IS_E1H_OFFSET ? 0x8000 : 0x1000)
 #define USTORM_ASSERT_LIST_OFFSET(idx) \
-	(IS_E1H_OFFSET? (0x8020 + (idx * 0x10)) : (0x1020 + (idx * 0x10)))
+	(IS_E1H_OFFSET ? (0x8020 + (idx * 0x10)) : (0x1020 + (idx * 0x10)))
 #define USTORM_CQE_PAGE_BASE_OFFSET(port, clientId) \
-	(IS_E1H_OFFSET? (0x3298 + (port * 0x258) + (clientId * 0x18)) : \
+	(IS_E1H_OFFSET ? (0x3298 + (port * 0x258) + (clientId * 0x18)) : \
 	(0x5450 + (port * 0x1c8) + (clientId * 0x18)))
 #define USTORM_DEF_SB_HC_DISABLE_OFFSET(function, index) \
-	(IS_E1H_OFFSET? (0x951a + ((function>>1) * 0x28) + ((function&1) \
-	* 0xa0) + (index * 0x4)) : (0x191a + (function * 0x28) + (index * \
-	0x4)))
+	(IS_E1H_OFFSET ? (0x951a + ((function>>1) * 0x28) + \
+	((function&1) * 0xa0) + (index * 0x4)) : (0x191a + (function * \
+	0x28) + (index * 0x4)))
 #define USTORM_DEF_SB_HOST_SB_ADDR_OFFSET(function) \
-	(IS_E1H_OFFSET? (0x9500 + ((function>>1) * 0x28) + ((function&1) \
-	* 0xa0)) : (0x1900 + (function * 0x28)))
+	(IS_E1H_OFFSET ? (0x9500 + ((function>>1) * 0x28) + \
+	((function&1) * 0xa0)) : (0x1900 + (function * 0x28)))
 #define USTORM_DEF_SB_HOST_STATUS_BLOCK_OFFSET(function) \
-	(IS_E1H_OFFSET? (0x9508 + ((function>>1) * 0x28) + ((function&1) \
-	* 0xa0)) : (0x1908 + (function * 0x28)))
+	(IS_E1H_OFFSET ? (0x9508 + ((function>>1) * 0x28) + \
+	((function&1) * 0xa0)) : (0x1908 + (function * 0x28)))
 #define USTORM_FUNCTION_MODE_OFFSET \
-	(IS_E1H_OFFSET? 0x2448 : 0xffffffff)
+	(IS_E1H_OFFSET ? 0x2448 : 0xffffffff)
 #define USTORM_HC_BTR_OFFSET(port) \
-	(IS_E1H_OFFSET? (0x9644 + (port * 0xd0)) : (0x1954 + (port * 0xb8)))
+	(IS_E1H_OFFSET ? (0x9644 + (port * 0xd0)) : (0x1954 + (port * 0xb8)))
 #define USTORM_MAX_AGG_SIZE_OFFSET(port, clientId) \
-	(IS_E1H_OFFSET? (0x3290 + (port * 0x258) + (clientId * 0x18)) : \
+	(IS_E1H_OFFSET ? (0x3290 + (port * 0x258) + (clientId * 0x18)) : \
 	(0x5448 + (port * 0x1c8) + (clientId * 0x18)))
 #define USTORM_MEM_WORKAROUND_ADDRESS_OFFSET(function) \
-	(IS_E1H_OFFSET? (0x2408 + (function * 0x8)) : (0x5408 + \
+	(IS_E1H_OFFSET ? (0x2408 + (function * 0x8)) : (0x5408 + \
 	(function * 0x8)))
 #define USTORM_SB_HC_DISABLE_OFFSET(port, cpu_id, index) \
-	(IS_E1H_OFFSET? (0x901a + (port * 0x280) + (cpu_id * 0x28) + \
+	(IS_E1H_OFFSET ? (0x901a + (port * 0x280) + (cpu_id * 0x28) + \
 	(index * 0x4)) : (0x141a + (port * 0x280) + (cpu_id * 0x28) + \
 	(index * 0x4)))
 #define USTORM_SB_HC_TIMEOUT_OFFSET(port, cpu_id, index) \
-	(IS_E1H_OFFSET? (0x9018 + (port * 0x280) + (cpu_id * 0x28) + \
+	(IS_E1H_OFFSET ? (0x9018 + (port * 0x280) + (cpu_id * 0x28) + \
 	(index * 0x4)) : (0x1418 + (port * 0x280) + (cpu_id * 0x28) + \
 	(index * 0x4)))
 #define USTORM_SB_HOST_SB_ADDR_OFFSET(port, cpu_id) \
-	(IS_E1H_OFFSET? (0x9000 + (port * 0x280) + (cpu_id * 0x28)) : \
+	(IS_E1H_OFFSET ? (0x9000 + (port * 0x280) + (cpu_id * 0x28)) : \
 	(0x1400 + (port * 0x280) + (cpu_id * 0x28)))
 #define USTORM_SB_HOST_STATUS_BLOCK_OFFSET(port, cpu_id) \
-	(IS_E1H_OFFSET? (0x9008 + (port * 0x280) + (cpu_id * 0x28)) : \
+	(IS_E1H_OFFSET ? (0x9008 + (port * 0x280) + (cpu_id * 0x28)) : \
 	(0x1408 + (port * 0x280) + (cpu_id * 0x28)))
 #define XSTORM_ASSERT_LIST_INDEX_OFFSET \
-	(IS_E1H_OFFSET? 0x9000 : 0x1000)
+	(IS_E1H_OFFSET ? 0x9000 : 0x1000)
 #define XSTORM_ASSERT_LIST_OFFSET(idx) \
-	(IS_E1H_OFFSET? (0x9020 + (idx * 0x10)) : (0x1020 + (idx * 0x10)))
+	(IS_E1H_OFFSET ? (0x9020 + (idx * 0x10)) : (0x1020 + (idx * 0x10)))
 #define XSTORM_CMNG_PER_PORT_VARS_OFFSET(port) \
-	(IS_E1H_OFFSET? (0x24a8 + (port * 0x40)) : (0x3ba0 + (port * 0x40)))
+	(IS_E1H_OFFSET ? (0x24a8 + (port * 0x40)) : (0x3ba0 + (port * 0x40)))
 #define XSTORM_DEF_SB_HC_DISABLE_OFFSET(function, index) \
-	(IS_E1H_OFFSET? (0xa01a + ((function>>1) * 0x28) + ((function&1) \
-	* 0xa0) + (index * 0x4)) : (0x141a + (function * 0x28) + (index * \
-	0x4)))
+	(IS_E1H_OFFSET ? (0xa01a + ((function>>1) * 0x28) + \
+	((function&1) * 0xa0) + (index * 0x4)) : (0x141a + (function * \
+	0x28) + (index * 0x4)))
 #define XSTORM_DEF_SB_HOST_SB_ADDR_OFFSET(function) \
-	(IS_E1H_OFFSET? (0xa000 + ((function>>1) * 0x28) + ((function&1) \
-	* 0xa0)) : (0x1400 + (function * 0x28)))
+	(IS_E1H_OFFSET ? (0xa000 + ((function>>1) * 0x28) + \
+	((function&1) * 0xa0)) : (0x1400 + (function * 0x28)))
 #define XSTORM_DEF_SB_HOST_STATUS_BLOCK_OFFSET(function) \
-	(IS_E1H_OFFSET? (0xa008 + ((function>>1) * 0x28) + ((function&1) \
-	* 0xa0)) : (0x1408 + (function * 0x28)))
+	(IS_E1H_OFFSET ? (0xa008 + ((function>>1) * 0x28) + \
+	((function&1) * 0xa0)) : (0x1408 + (function * 0x28)))
 #define XSTORM_E1HOV_OFFSET(function) \
-	(IS_E1H_OFFSET? (0x2ab8 + (function * 0x2)) : 0xffffffff)
+	(IS_E1H_OFFSET ? (0x2ab8 + (function * 0x2)) : 0xffffffff)
 #define XSTORM_ETH_STATS_QUERY_ADDR_OFFSET(function) \
-	(IS_E1H_OFFSET? (0x2418 + (function * 0x8)) : (0x3b70 + \
+	(IS_E1H_OFFSET ? (0x2418 + (function * 0x8)) : (0x3b70 + \
 	(function * 0x8)))
 #define XSTORM_FAIRNESS_PER_VN_VARS_OFFSET(function) \
-	(IS_E1H_OFFSET? (0x2568 + (function * 0x70)) : (0x3c60 + \
+	(IS_E1H_OFFSET ? (0x2568 + (function * 0x70)) : (0x3c60 + \
 	(function * 0x70)))
 #define XSTORM_FUNCTION_MODE_OFFSET \
-	(IS_E1H_OFFSET? 0x2ac8 : 0xffffffff)
+	(IS_E1H_OFFSET ? 0x2ac8 : 0xffffffff)
 #define XSTORM_HC_BTR_OFFSET(port) \
-	(IS_E1H_OFFSET? (0xa144 + (port * 0x30)) : (0x1454 + (port * 0x18)))
+	(IS_E1H_OFFSET ? (0xa144 + (port * 0x30)) : (0x1454 + (port * 0x18)))
+#define XSTORM_PER_COUNTER_ID_STATS_OFFSET(port, stats_counter_id) \
+	(IS_E1H_OFFSET ? (0xc000 + (port * 0x3f0) + (stats_counter_id * \
+	0x38)) : (0x3378 + (port * 0x3f0) + (stats_counter_id * 0x38)))
 #define XSTORM_RATE_SHAPING_PER_VN_VARS_OFFSET(function) \
-	(IS_E1H_OFFSET? (0x2528 + (function * 0x70)) : (0x3c20 + \
+	(IS_E1H_OFFSET ? (0x2528 + (function * 0x70)) : (0x3c20 + \
 	(function * 0x70)))
 #define XSTORM_SPQ_PAGE_BASE_OFFSET(function) \
-	(IS_E1H_OFFSET? (0x2000 + (function * 0x10)) : (0x3328 + \
+	(IS_E1H_OFFSET ? (0x2000 + (function * 0x10)) : (0x3328 + \
 	(function * 0x10)))
 #define XSTORM_SPQ_PROD_OFFSET(function) \
-	(IS_E1H_OFFSET? (0x2008 + (function * 0x10)) : (0x3330 + \
+	(IS_E1H_OFFSET ? (0x2008 + (function * 0x10)) : (0x3330 + \
 	(function * 0x10)))
 #define XSTORM_STATS_FLAGS_OFFSET(function) \
-	(IS_E1H_OFFSET? (0x23d8 + (function * 0x8)) : (0x3b60 + \
+	(IS_E1H_OFFSET ? (0x23d8 + (function * 0x8)) : (0x3b60 + \
 	(function * 0x8)))
 #define COMMON_ASM_INVALID_ASSERT_OPCODE 0x0
 
diff --git a/drivers/net/bnx2x_hsi.h b/drivers/net/bnx2x_hsi.h
index d3e8198d7dba..efd764427fa1 100644
--- a/drivers/net/bnx2x_hsi.h
+++ b/drivers/net/bnx2x_hsi.h
@@ -1268,7 +1268,7 @@ struct doorbell {
 
 
 /*
- * IGU driver acknowlegement register
+ * IGU driver acknowledgement register
  */
 struct igu_ack_register {
 #if defined(__BIG_ENDIAN)
@@ -1882,7 +1882,7 @@ struct timers_block_context {
 };
 
 /*
- * structure for easy accessability to assembler
+ * structure for easy accessibility to assembler
  */
 struct eth_tx_bd_flags {
 	u8 as_bitfield;
@@ -2044,7 +2044,7 @@ struct eth_context {
 
 
 /*
- * ethernet doorbell
+ * Ethernet doorbell
  */
 struct eth_tx_doorbell {
 #if defined(__BIG_ENDIAN)
@@ -2256,7 +2256,7 @@ struct ramrod_data {
 };
 
 /*
- * union for ramrod data for ethernet protocol (CQE) (force size of 16 bits)
+ * union for ramrod data for Ethernet protocol (CQE) (force size of 16 bits)
  */
 union eth_ramrod_data {
 	struct ramrod_data general;
@@ -2330,7 +2330,7 @@ struct spe_hdr {
 };
 
 /*
- * ethernet slow path element
+ * Ethernet slow path element
  */
 union eth_specific_data {
 	u8 protocol_data[8];
@@ -2343,7 +2343,7 @@ union eth_specific_data {
 };
 
 /*
- * ethernet slow path element
+ * Ethernet slow path element
  */
 struct eth_spe {
 	struct spe_hdr hdr;
@@ -2615,7 +2615,7 @@ struct tstorm_eth_rx_producers {
 
 
 /*
- * common flag to indicate existance of TPA.
+ * common flag to indicate existence of TPA.
  */
 struct tstorm_eth_tpa_exist {
 #if defined(__BIG_ENDIAN)
@@ -2765,7 +2765,7 @@ struct tstorm_common_stats {
 };
 
 /*
- * Eth statistics query sturcture for the eth_stats_quesry ramrod
+ * Eth statistics query structure for the eth_stats_query ramrod
  */
 struct eth_stats_query {
 	struct xstorm_common_stats xstorm_common;
diff --git a/drivers/net/bnx2x_init.h b/drivers/net/bnx2x_init.h
index 4c7750789b62..130927cfc75b 100644
--- a/drivers/net/bnx2x_init.h
+++ b/drivers/net/bnx2x_init.h
@@ -72,26 +72,26 @@
 
 
 struct raw_op {
-	u32 op		:8;
-	u32 offset	:24;
+	u32 op:8;
+	u32 offset:24;
 	u32 raw_data;
 };
 
 struct op_read {
-	u32 op		:8;
-	u32 offset	:24;
+	u32 op:8;
+	u32 offset:24;
 	u32 pad;
 };
 
 struct op_write {
-	u32 op		:8;
-	u32 offset	:24;
+	u32 op:8;
+	u32 offset:24;
 	u32 val;
 };
 
 struct op_string_write {
-	u32 op		:8;
-	u32 offset	:24;
+	u32 op:8;
+	u32 offset:24;
 #ifdef __LITTLE_ENDIAN
 	u16 data_off;
 	u16 data_len;
@@ -102,8 +102,8 @@ struct op_string_write {
 };
 
 struct op_zero {
-	u32 op		:8;
-	u32 offset	:24;
+	u32 op:8;
+	u32 offset:24;
 	u32 len;
 };
 
@@ -208,7 +208,7 @@ static void bnx2x_init_wr_64(struct bnx2x *bp, u32 addr, const u32 *data,
 /*********************************************************
    There are different blobs for each PRAM section.
    In addition, each blob write operation is divided into a few operations
-   in order to decrease the amount of phys. contigious buffer needed.
+   in order to decrease the amount of phys. contiguous buffer needed.
    Thus, when we select a blob the address may be with some offset
    from the beginning of PRAM section.
    The same holds for the INT_TABLE sections.
@@ -336,7 +336,7 @@ static void bnx2x_init_block(struct bnx2x *bp, u32 op_start, u32 op_end)
 		len = op->str_wr.data_len;
 		data = data_base + op->str_wr.data_off;
 
-		/* carefull! it must be in order */
+		/* careful! it must be in order */
 		if (unlikely(op_type > OP_WB)) {
 
 			/* If E1 only */
@@ -740,7 +740,7 @@ static u8 calc_crc8(u32 data, u8 crc)
 	return crc_res;
 }
 
-/* regiesers addresses are not in order
+/* registers addresses are not in order
    so these arrays help simplify the code */
 static const int cm_start[E1H_FUNC_MAX][9] = {
 	{MISC_FUNC0_START, TCM_FUNC0_START, UCM_FUNC0_START, CCM_FUNC0_START,
diff --git a/drivers/net/bnx2x_init_values.h b/drivers/net/bnx2x_init_values.h
index 63019055e4bb..9755bf6b08dd 100644
--- a/drivers/net/bnx2x_init_values.h
+++ b/drivers/net/bnx2x_init_values.h
@@ -901,31 +901,28 @@ static const struct raw_op init_ops[] = {
 	{OP_ZR_E1H, USEM_REG_FAST_MEMORY + 0x3760, 0x4},
 	{OP_ZR_E1, USEM_REG_FAST_MEMORY + 0x1e20, 0x42},
 	{OP_ZR_E1H, USEM_REG_FAST_MEMORY + 0x3738, 0x9},
-	{OP_ZR_E1, USEM_REG_FAST_MEMORY + 0x3000, 0x400},
+	{OP_ZR_E1, USEM_REG_FAST_MEMORY + 0x4b68, 0x2},
 	{OP_SW_E1H, USEM_REG_FAST_MEMORY + 0x3738 + 0x24, 0x10293},
-	{OP_ZR_E1, USEM_REG_FAST_MEMORY + 0x2c00, 0x2},
+	{OP_SW_E1, USEM_REG_FAST_MEMORY + 0x4b68 + 0x8, 0x20278},
 	{OP_ZR_E1H, USEM_REG_FAST_MEMORY + 0x3180, 0x42},
-	{OP_SW_E1, USEM_REG_FAST_MEMORY + 0x2c00 + 0x8, 0x20278},
+	{OP_ZR_E1, USEM_REG_FAST_MEMORY + 0x4b10, 0x2},
 	{OP_ZR_E1H, USEM_REG_FAST_MEMORY + 0x5000, 0x400},
-	{OP_ZR_E1, USEM_REG_FAST_MEMORY + 0x4b68, 0x2},
+	{OP_SW_E1, USEM_REG_FAST_MEMORY + 0x2830, 0x2027a},
 	{OP_ZR_E1H, USEM_REG_FAST_MEMORY + 0x4000, 0x2},
-	{OP_SW_E1, USEM_REG_FAST_MEMORY + 0x4b68 + 0x8, 0x2027a},
 	{OP_SW_E1H, USEM_REG_FAST_MEMORY + 0x4000 + 0x8, 0x20294},
-	{OP_ZR_E1, USEM_REG_FAST_MEMORY + 0x4b10, 0x2},
 	{OP_ZR_E1H, USEM_REG_FAST_MEMORY + 0x6b68, 0x2},
-	{OP_SW_E1, USEM_REG_FAST_MEMORY + 0x2830, 0x2027c},
 	{OP_SW_E1H, USEM_REG_FAST_MEMORY + 0x6b68 + 0x8, 0x20296},
 	{OP_ZR_E1H, USEM_REG_FAST_MEMORY + 0x6b10, 0x2},
 	{OP_SW_E1H, USEM_REG_FAST_MEMORY + 0x74c0, 0x20298},
 	{OP_WR, USEM_REG_FAST_MEMORY + 0x10800, 0x1000000},
-	{OP_SW_E1, USEM_REG_FAST_MEMORY + 0x10c00, 0x10027e},
+	{OP_SW_E1, USEM_REG_FAST_MEMORY + 0x10c00, 0x10027c},
 	{OP_SW_E1H, USEM_REG_FAST_MEMORY + 0x10c00, 0x10029a},
 	{OP_WR, USEM_REG_FAST_MEMORY + 0x10800, 0x0},
-	{OP_SW_E1, USEM_REG_FAST_MEMORY + 0x10c40, 0x10028e},
+	{OP_SW_E1, USEM_REG_FAST_MEMORY + 0x10c40, 0x10028c},
 	{OP_SW_E1H, USEM_REG_FAST_MEMORY + 0x10c40, 0x1002aa},
 	{OP_ZP_E1, USEM_REG_INT_TABLE, 0xc20000},
 	{OP_ZP_E1H, USEM_REG_INT_TABLE, 0xc40000},
-	{OP_WR_64_E1, USEM_REG_INT_TABLE + 0x368, 0x13029e},
+	{OP_WR_64_E1, USEM_REG_INT_TABLE + 0x368, 0x13029c},
 	{OP_WR_64_E1H, USEM_REG_INT_TABLE + 0x368, 0x1302ba},
 	{OP_ZP_E1, USEM_REG_PRAM, 0x311c0000},
 	{OP_ZP_E1H, USEM_REG_PRAM, 0x31070000},
@@ -933,11 +930,11 @@ static const struct raw_op init_ops[] = {
 	{OP_ZP_E1H, USEM_REG_PRAM + 0x8000, 0x330e0c42},
 	{OP_ZP_E1, USEM_REG_PRAM + 0x10000, 0x38561919},
 	{OP_ZP_E1H, USEM_REG_PRAM + 0x10000, 0x389b1906},
-	{OP_WR_64_E1, USEM_REG_PRAM + 0x17fe0, 0x500402a0},
+	{OP_WR_64_E1, USEM_REG_PRAM + 0x17fe0, 0x5004029e},
 	{OP_ZP_E1H, USEM_REG_PRAM + 0x18000, 0x132272d},
 	{OP_WR_64_E1H, USEM_REG_PRAM + 0x18250, 0x4fb602bc},
-#define USEM_COMMON_END         790
-#define USEM_PORT0_START        790
+#define USEM_COMMON_END         787
+#define USEM_PORT0_START        787
 	{OP_ZR_E1, USEM_REG_FAST_MEMORY + 0x1400, 0xa0},
 	{OP_ZR_E1H, USEM_REG_FAST_MEMORY + 0x9000, 0xa0},
 	{OP_ZR_E1, USEM_REG_FAST_MEMORY + 0x1900, 0xa},
@@ -950,44 +947,27 @@ static const struct raw_op init_ops[] = {
 	{OP_ZR_E1H, USEM_REG_FAST_MEMORY + 0x3288, 0x96},
 	{OP_ZR_E1, USEM_REG_FAST_MEMORY + 0x5440, 0x72},
 	{OP_ZR_E1H, USEM_REG_FAST_MEMORY + 0x5000, 0x20},
-	{OP_ZR_E1, USEM_REG_FAST_MEMORY + 0x3000, 0x20},
+	{OP_ZR_E1, USEM_REG_FAST_MEMORY + 0x4b78, 0x52},
 	{OP_ZR_E1H, USEM_REG_FAST_MEMORY + 0x5100, 0x20},
-	{OP_ZR_E1, USEM_REG_FAST_MEMORY + 0x3100, 0x20},
+	{OP_ZR_E1, USEM_REG_FAST_MEMORY + 0x4e08, 0xc},
 	{OP_ZR_E1H, USEM_REG_FAST_MEMORY + 0x5200, 0x20},
-	{OP_ZR_E1, USEM_REG_FAST_MEMORY + 0x3200, 0x20},
 	{OP_ZR_E1H, USEM_REG_FAST_MEMORY + 0x5300, 0x20},
-	{OP_ZR_E1, USEM_REG_FAST_MEMORY + 0x3300, 0x20},
 	{OP_ZR_E1H, USEM_REG_FAST_MEMORY + 0x5400, 0x20},
-	{OP_ZR_E1, USEM_REG_FAST_MEMORY + 0x3400, 0x20},
 	{OP_ZR_E1H, USEM_REG_FAST_MEMORY + 0x5500, 0x20},
-	{OP_ZR_E1, USEM_REG_FAST_MEMORY + 0x3500, 0x20},
 	{OP_ZR_E1H, USEM_REG_FAST_MEMORY + 0x5600, 0x20},
-	{OP_ZR_E1, USEM_REG_FAST_MEMORY + 0x3600, 0x20},
 	{OP_ZR_E1H, USEM_REG_FAST_MEMORY + 0x5700, 0x20},
-	{OP_ZR_E1, USEM_REG_FAST_MEMORY + 0x3700, 0x20},
 	{OP_ZR_E1H, USEM_REG_FAST_MEMORY + 0x5800, 0x20},
-	{OP_ZR_E1, USEM_REG_FAST_MEMORY + 0x3800, 0x20},
 	{OP_ZR_E1H, USEM_REG_FAST_MEMORY + 0x5900, 0x20},
-	{OP_ZR_E1, USEM_REG_FAST_MEMORY + 0x3900, 0x20},
 	{OP_ZR_E1H, USEM_REG_FAST_MEMORY + 0x5a00, 0x20},
-	{OP_ZR_E1, USEM_REG_FAST_MEMORY + 0x3a00, 0x20},
 	{OP_ZR_E1H, USEM_REG_FAST_MEMORY + 0x5b00, 0x20},
-	{OP_ZR_E1, USEM_REG_FAST_MEMORY + 0x3b00, 0x20},
 	{OP_ZR_E1H, USEM_REG_FAST_MEMORY + 0x5c00, 0x20},
-	{OP_ZR_E1, USEM_REG_FAST_MEMORY + 0x3c00, 0x20},
 	{OP_ZR_E1H, USEM_REG_FAST_MEMORY + 0x5d00, 0x20},
-	{OP_ZR_E1, USEM_REG_FAST_MEMORY + 0x3d00, 0x20},
 	{OP_ZR_E1H, USEM_REG_FAST_MEMORY + 0x5e00, 0x20},
-	{OP_ZR_E1, USEM_REG_FAST_MEMORY + 0x3e00, 0x20},
 	{OP_ZR_E1H, USEM_REG_FAST_MEMORY + 0x5f00, 0x20},
-	{OP_ZR_E1, USEM_REG_FAST_MEMORY + 0x3f00, 0x20},
 	{OP_ZR_E1H, USEM_REG_FAST_MEMORY + 0x6b78, 0x52},
-	{OP_ZR_E1, USEM_REG_FAST_MEMORY + 0x2c10, 0x2},
 	{OP_ZR_E1H, USEM_REG_FAST_MEMORY + 0x6e08, 0xc},
-	{OP_ZR_E1, USEM_REG_FAST_MEMORY + 0x4b78, 0x52},
-	{OP_ZR_E1, USEM_REG_FAST_MEMORY + 0x4e08, 0xc},
-#define USEM_PORT0_END          838
-#define USEM_PORT1_START        838
+#define USEM_PORT0_END          818
+#define USEM_PORT1_START        818
 	{OP_ZR_E1, USEM_REG_FAST_MEMORY + 0x1680, 0xa0},
 	{OP_ZR_E1H, USEM_REG_FAST_MEMORY + 0x9280, 0xa0},
 	{OP_ZR_E1, USEM_REG_FAST_MEMORY + 0x1928, 0xa},
@@ -1000,76 +980,59 @@ static const struct raw_op init_ops[] = {
 	{OP_ZR_E1H, USEM_REG_FAST_MEMORY + 0x34e0, 0x96},
 	{OP_ZR_E1, USEM_REG_FAST_MEMORY + 0x5608, 0x72},
 	{OP_ZR_E1H, USEM_REG_FAST_MEMORY + 0x5080, 0x20},
-	{OP_ZR_E1, USEM_REG_FAST_MEMORY + 0x3080, 0x20},
+	{OP_ZR_E1, USEM_REG_FAST_MEMORY + 0x4cc0, 0x52},
 	{OP_ZR_E1H, USEM_REG_FAST_MEMORY + 0x5180, 0x20},
-	{OP_ZR_E1, USEM_REG_FAST_MEMORY + 0x3180, 0x20},
+	{OP_ZR_E1, USEM_REG_FAST_MEMORY + 0x4e38, 0xc},
 	{OP_ZR_E1H, USEM_REG_FAST_MEMORY + 0x5280, 0x20},
-	{OP_ZR_E1, USEM_REG_FAST_MEMORY + 0x3280, 0x20},
 	{OP_ZR_E1H, USEM_REG_FAST_MEMORY + 0x5380, 0x20},
-	{OP_ZR_E1, USEM_REG_FAST_MEMORY + 0x3380, 0x20},
 	{OP_ZR_E1H, USEM_REG_FAST_MEMORY + 0x5480, 0x20},
-	{OP_ZR_E1, USEM_REG_FAST_MEMORY + 0x3480, 0x20},
 	{OP_ZR_E1H, USEM_REG_FAST_MEMORY + 0x5580, 0x20},
-	{OP_ZR_E1, USEM_REG_FAST_MEMORY + 0x3580, 0x20},
 	{OP_ZR_E1H, USEM_REG_FAST_MEMORY + 0x5680, 0x20},
-	{OP_ZR_E1, USEM_REG_FAST_MEMORY + 0x3680, 0x20},
 	{OP_ZR_E1H, USEM_REG_FAST_MEMORY + 0x5780, 0x20},
-	{OP_ZR_E1, USEM_REG_FAST_MEMORY + 0x3780, 0x20},
 	{OP_ZR_E1H, USEM_REG_FAST_MEMORY + 0x5880, 0x20},
-	{OP_ZR_E1, USEM_REG_FAST_MEMORY + 0x3880, 0x20},
 	{OP_ZR_E1H, USEM_REG_FAST_MEMORY + 0x5980, 0x20},
-	{OP_ZR_E1, USEM_REG_FAST_MEMORY + 0x3980, 0x20},
 	{OP_ZR_E1H, USEM_REG_FAST_MEMORY + 0x5a80, 0x20},
-	{OP_ZR_E1, USEM_REG_FAST_MEMORY + 0x3a80, 0x20},
 	{OP_ZR_E1H, USEM_REG_FAST_MEMORY + 0x5b80, 0x20},
-	{OP_ZR_E1, USEM_REG_FAST_MEMORY + 0x3b80, 0x20},
 	{OP_ZR_E1H, USEM_REG_FAST_MEMORY + 0x5c80, 0x20},
-	{OP_ZR_E1, USEM_REG_FAST_MEMORY + 0x3c80, 0x20},
 	{OP_ZR_E1H, USEM_REG_FAST_MEMORY + 0x5d80, 0x20},
-	{OP_ZR_E1, USEM_REG_FAST_MEMORY + 0x3d80, 0x20},
 	{OP_ZR_E1H, USEM_REG_FAST_MEMORY + 0x5e80, 0x20},
-	{OP_ZR_E1, USEM_REG_FAST_MEMORY + 0x3e80, 0x20},
 	{OP_ZR_E1H, USEM_REG_FAST_MEMORY + 0x5f80, 0x20},
-	{OP_ZR_E1, USEM_REG_FAST_MEMORY + 0x3f80, 0x20},
 	{OP_ZR_E1H, USEM_REG_FAST_MEMORY + 0x6cc0, 0x52},
-	{OP_ZR_E1, USEM_REG_FAST_MEMORY + 0x2c20, 0x2},
 	{OP_ZR_E1H, USEM_REG_FAST_MEMORY + 0x6e38, 0xc},
-	{OP_ZR_E1, USEM_REG_FAST_MEMORY + 0x4cc0, 0x52},
-	{OP_ZR_E1, USEM_REG_FAST_MEMORY + 0x4e38, 0xc},
-#define USEM_PORT1_END          886
-#define USEM_FUNC0_START        886
+#define USEM_PORT1_END          849
+#define USEM_FUNC0_START        849
 	{OP_ZR_E1H, USEM_REG_FAST_MEMORY + 0x3000, 0x4},
 	{OP_ZR_E1H, USEM_REG_FAST_MEMORY + 0x4010, 0x2},
-#define USEM_FUNC0_END          888
-#define USEM_FUNC1_START        888
+#define USEM_FUNC0_END          851
+#define USEM_FUNC1_START        851
 	{OP_ZR_E1H, USEM_REG_FAST_MEMORY + 0x3010, 0x4},
 	{OP_ZR_E1H, USEM_REG_FAST_MEMORY + 0x4020, 0x2},
-#define USEM_FUNC1_END          890
-#define USEM_FUNC2_START        890
+#define USEM_FUNC1_END          853
+#define USEM_FUNC2_START        853
 	{OP_ZR_E1H, USEM_REG_FAST_MEMORY + 0x3020, 0x4},
 	{OP_ZR_E1H, USEM_REG_FAST_MEMORY + 0x4030, 0x2},
-#define USEM_FUNC2_END          892
-#define USEM_FUNC3_START        892
+#define USEM_FUNC2_END          855
+#define USEM_FUNC3_START        855
 	{OP_ZR_E1H, USEM_REG_FAST_MEMORY + 0x3030, 0x4},
 	{OP_ZR_E1H, USEM_REG_FAST_MEMORY + 0x4040, 0x2},
-#define USEM_FUNC3_END          894
-#define USEM_FUNC4_START        894
+#define USEM_FUNC3_END          857
+#define USEM_FUNC4_START        857
 	{OP_ZR_E1H, USEM_REG_FAST_MEMORY + 0x3040, 0x4},
 	{OP_ZR_E1H, USEM_REG_FAST_MEMORY + 0x4050, 0x2},
-#define USEM_FUNC4_END          896
-#define USEM_FUNC5_START        896
+#define USEM_FUNC4_END          859
+#define USEM_FUNC5_START        859
 	{OP_ZR_E1H, USEM_REG_FAST_MEMORY + 0x3050, 0x4},
 	{OP_ZR_E1H, USEM_REG_FAST_MEMORY + 0x4060, 0x2},
-#define USEM_FUNC5_END          898
-#define USEM_FUNC6_START        898
+#define USEM_FUNC5_END          861
+#define USEM_FUNC6_START        861
 	{OP_ZR_E1H, USEM_REG_FAST_MEMORY + 0x3060, 0x4},
 	{OP_ZR_E1H, USEM_REG_FAST_MEMORY + 0x4070, 0x2},
-#define USEM_FUNC6_END          900
-#define USEM_FUNC7_START        900
+#define USEM_FUNC6_END          863
+#define USEM_FUNC7_START        863
 	{OP_ZR_E1H, USEM_REG_FAST_MEMORY + 0x3070, 0x4},
 	{OP_ZR_E1H, USEM_REG_FAST_MEMORY + 0x4080, 0x2},
-#define USEM_FUNC7_END          902
-#define CSEM_COMMON_START       902
+#define USEM_FUNC7_END          865
+#define CSEM_COMMON_START       865
 	{OP_RD, CSEM_REG_MSG_NUM_FIC0, 0x0},
 	{OP_RD, CSEM_REG_MSG_NUM_FIC1, 0x0},
 	{OP_RD, CSEM_REG_MSG_NUM_FOC0, 0x0},
@@ -1128,29 +1091,29 @@ static const struct raw_op init_ops[] = {
 	{OP_WR_E1H, CSEM_REG_FAST_MEMORY + 0x11e8, 0x0},
 	{OP_ZR_E1, CSEM_REG_FAST_MEMORY + 0x25c0, 0x240},
 	{OP_ZR_E1H, CSEM_REG_FAST_MEMORY + 0x3000, 0xc0},
-	{OP_SW_E1, CSEM_REG_FAST_MEMORY + 0x2ec8, 0x802a2},
+	{OP_SW_E1, CSEM_REG_FAST_MEMORY + 0x2ec8, 0x802a0},
 	{OP_ZR_E1H, CSEM_REG_FAST_MEMORY + 0x4070, 0x80},
 	{OP_ZR_E1H, CSEM_REG_FAST_MEMORY + 0x5280, 0x4},
 	{OP_ZR_E1H, CSEM_REG_FAST_MEMORY + 0x6280, 0x240},
 	{OP_SW_E1H, CSEM_REG_FAST_MEMORY + 0x6b88, 0x2002be},
 	{OP_WR, CSEM_REG_FAST_MEMORY + 0x10800, 0x13fffff},
-	{OP_SW_E1, CSEM_REG_FAST_MEMORY + 0x10c00, 0x1002aa},
+	{OP_SW_E1, CSEM_REG_FAST_MEMORY + 0x10c00, 0x1002a8},
 	{OP_SW_E1H, CSEM_REG_FAST_MEMORY + 0x10c00, 0x1002de},
 	{OP_WR, CSEM_REG_FAST_MEMORY + 0x10800, 0x0},
-	{OP_SW_E1, CSEM_REG_FAST_MEMORY + 0x10c40, 0x1002ba},
+	{OP_SW_E1, CSEM_REG_FAST_MEMORY + 0x10c40, 0x1002b8},
 	{OP_SW_E1H, CSEM_REG_FAST_MEMORY + 0x10c40, 0x1002ee},
 	{OP_ZP_E1, CSEM_REG_INT_TABLE, 0x6e0000},
 	{OP_ZP_E1H, CSEM_REG_INT_TABLE, 0x6f0000},
-	{OP_WR_64_E1, CSEM_REG_INT_TABLE + 0x380, 0x1002ca},
+	{OP_WR_64_E1, CSEM_REG_INT_TABLE + 0x380, 0x1002c8},
 	{OP_WR_64_E1H, CSEM_REG_INT_TABLE + 0x380, 0x1002fe},
 	{OP_ZP_E1, CSEM_REG_PRAM, 0x32580000},
 	{OP_ZP_E1H, CSEM_REG_PRAM, 0x31fa0000},
 	{OP_ZP_E1, CSEM_REG_PRAM + 0x8000, 0x18270c96},
 	{OP_ZP_E1H, CSEM_REG_PRAM + 0x8000, 0x19040c7f},
-	{OP_WR_64_E1, CSEM_REG_PRAM + 0xb210, 0x682402cc},
+	{OP_WR_64_E1, CSEM_REG_PRAM + 0xb210, 0x682402ca},
 	{OP_WR_64_E1H, CSEM_REG_PRAM + 0xb430, 0x67e00300},
-#define CSEM_COMMON_END         981
-#define CSEM_PORT0_START        981
+#define CSEM_COMMON_END         944
+#define CSEM_PORT0_START        944
 	{OP_ZR_E1, CSEM_REG_FAST_MEMORY + 0x1400, 0xa0},
 	{OP_ZR_E1H, CSEM_REG_FAST_MEMORY + 0x8000, 0xa0},
 	{OP_ZR_E1, CSEM_REG_FAST_MEMORY + 0x1900, 0x10},
@@ -1163,8 +1126,8 @@ static const struct raw_op init_ops[] = {
 	{OP_ZR_E1H, CSEM_REG_FAST_MEMORY + 0x6040, 0x30},
 	{OP_ZR_E1, CSEM_REG_FAST_MEMORY + 0x3040, 0x6},
 	{OP_ZR_E1, CSEM_REG_FAST_MEMORY + 0x2410, 0x30},
-#define CSEM_PORT0_END          993
-#define CSEM_PORT1_START        993
+#define CSEM_PORT0_END          956
+#define CSEM_PORT1_START        956
 	{OP_ZR_E1, CSEM_REG_FAST_MEMORY + 0x1680, 0xa0},
 	{OP_ZR_E1H, CSEM_REG_FAST_MEMORY + 0x8280, 0xa0},
 	{OP_ZR_E1, CSEM_REG_FAST_MEMORY + 0x1940, 0x10},
@@ -1177,43 +1140,43 @@ static const struct raw_op init_ops[] = {
 	{OP_ZR_E1H, CSEM_REG_FAST_MEMORY + 0x6100, 0x30},
 	{OP_ZR_E1, CSEM_REG_FAST_MEMORY + 0x3058, 0x6},
 	{OP_ZR_E1, CSEM_REG_FAST_MEMORY + 0x24d0, 0x30},
-#define CSEM_PORT1_END          1005
-#define CSEM_FUNC0_START        1005
+#define CSEM_PORT1_END          968
+#define CSEM_FUNC0_START        968
 	{OP_WR_E1H, CSEM_REG_FAST_MEMORY + 0x1148, 0x0},
 	{OP_ZR_E1H, CSEM_REG_FAST_MEMORY + 0x3300, 0x2},
-#define CSEM_FUNC0_END          1007
-#define CSEM_FUNC1_START        1007
+#define CSEM_FUNC0_END          970
+#define CSEM_FUNC1_START        970
 	{OP_WR_E1H, CSEM_REG_FAST_MEMORY + 0x114c, 0x0},
 	{OP_ZR_E1H, CSEM_REG_FAST_MEMORY + 0x3308, 0x2},
-#define CSEM_FUNC1_END          1009
-#define CSEM_FUNC2_START        1009
+#define CSEM_FUNC1_END          972
+#define CSEM_FUNC2_START        972
 	{OP_WR_E1H, CSEM_REG_FAST_MEMORY + 0x1150, 0x0},
 	{OP_ZR_E1H, CSEM_REG_FAST_MEMORY + 0x3310, 0x2},
-#define CSEM_FUNC2_END          1011
-#define CSEM_FUNC3_START        1011
+#define CSEM_FUNC2_END          974
+#define CSEM_FUNC3_START        974
 	{OP_WR_E1H, CSEM_REG_FAST_MEMORY + 0x1154, 0x0},
 	{OP_ZR_E1H, CSEM_REG_FAST_MEMORY + 0x3318, 0x2},
-#define CSEM_FUNC3_END          1013
-#define CSEM_FUNC4_START        1013
+#define CSEM_FUNC3_END          976
+#define CSEM_FUNC4_START        976
 	{OP_WR_E1H, CSEM_REG_FAST_MEMORY + 0x1158, 0x0},
 	{OP_ZR_E1H, CSEM_REG_FAST_MEMORY + 0x3320, 0x2},
-#define CSEM_FUNC4_END          1015
-#define CSEM_FUNC5_START        1015
+#define CSEM_FUNC4_END          978
+#define CSEM_FUNC5_START        978
 	{OP_WR_E1H, CSEM_REG_FAST_MEMORY + 0x115c, 0x0},
 	{OP_ZR_E1H, CSEM_REG_FAST_MEMORY + 0x3328, 0x2},
-#define CSEM_FUNC5_END          1017
-#define CSEM_FUNC6_START        1017
+#define CSEM_FUNC5_END          980
+#define CSEM_FUNC6_START        980
 	{OP_WR_E1H, CSEM_REG_FAST_MEMORY + 0x1160, 0x0},
 	{OP_ZR_E1H, CSEM_REG_FAST_MEMORY + 0x3330, 0x2},
-#define CSEM_FUNC6_END          1019
-#define CSEM_FUNC7_START        1019
+#define CSEM_FUNC6_END          982
+#define CSEM_FUNC7_START        982
 	{OP_WR_E1H, CSEM_REG_FAST_MEMORY + 0x1164, 0x0},
 	{OP_ZR_E1H, CSEM_REG_FAST_MEMORY + 0x3338, 0x2},
-#define CSEM_FUNC7_END          1021
-#define XPB_COMMON_START        1021
+#define CSEM_FUNC7_END          984
+#define XPB_COMMON_START        984
 	{OP_WR, GRCBASE_XPB + PB_REG_CONTROL, 0x20},
-#define XPB_COMMON_END          1022
-#define DQ_COMMON_START         1022
+#define XPB_COMMON_END          985
+#define DQ_COMMON_START         985
 	{OP_WR, DORQ_REG_MODE_ACT, 0x2},
 	{OP_WR, DORQ_REG_NORM_CID_OFST, 0x3},
 	{OP_WR, DORQ_REG_OUTST_REQ, 0x4},
@@ -1232,8 +1195,8 @@ static const struct raw_op init_ops[] = {
 	{OP_WR, DORQ_REG_DQ_FIFO_AFULL_TH, 0x76c},
 	{OP_WR, DORQ_REG_REGN, 0x7c1004},
 	{OP_WR, DORQ_REG_IF_EN, 0xf},
-#define DQ_COMMON_END           1040
-#define TIMERS_COMMON_START     1040
+#define DQ_COMMON_END           1003
+#define TIMERS_COMMON_START     1003
 	{OP_ZR, TM_REG_CLIN_PRIOR0_CLIENT, 0x2},
 	{OP_WR, TM_REG_LIN_SETCLR_FIFO_ALFULL_THR, 0x1c},
 	{OP_WR, TM_REG_CFC_AC_CRDCNT_VAL, 0x1},
@@ -1256,14 +1219,14 @@ static const struct raw_op init_ops[] = {
 	{OP_WR, TM_REG_EN_CL0_INPUT, 0x1},
 	{OP_WR, TM_REG_EN_CL1_INPUT, 0x1},
 	{OP_WR, TM_REG_EN_CL2_INPUT, 0x1},
-#define TIMERS_COMMON_END       1062
-#define TIMERS_PORT0_START      1062
+#define TIMERS_COMMON_END       1025
+#define TIMERS_PORT0_START      1025
 	{OP_ZR, TM_REG_LIN0_PHY_ADDR, 0x2},
-#define TIMERS_PORT0_END        1063
-#define TIMERS_PORT1_START      1063
+#define TIMERS_PORT0_END        1026
+#define TIMERS_PORT1_START      1026
 	{OP_ZR, TM_REG_LIN1_PHY_ADDR, 0x2},
-#define TIMERS_PORT1_END        1064
-#define XSDM_COMMON_START       1064
+#define TIMERS_PORT1_END        1027
+#define XSDM_COMMON_START       1027
 	{OP_WR_E1, XSDM_REG_CFC_RSP_START_ADDR, 0x614},
 	{OP_WR_E1H, XSDM_REG_CFC_RSP_START_ADDR, 0x424},
 	{OP_WR_E1, XSDM_REG_CMP_COUNTER_START_ADDR, 0x600},
@@ -1311,8 +1274,8 @@ static const struct raw_op init_ops[] = {
 	{OP_WR_ASIC, XSDM_REG_TIMER_TICK, 0x3e8},
 	{OP_WR_EMUL, XSDM_REG_TIMER_TICK, 0x1},
 	{OP_WR_FPGA, XSDM_REG_TIMER_TICK, 0xa},
-#define XSDM_COMMON_END         1111
-#define QM_COMMON_START         1111
+#define XSDM_COMMON_END         1074
+#define QM_COMMON_START         1074
 	{OP_WR, QM_REG_ACTCTRINITVAL_0, 0x6},
 	{OP_WR, QM_REG_ACTCTRINITVAL_1, 0x5},
 	{OP_WR, QM_REG_ACTCTRINITVAL_2, 0xa},
@@ -1613,8 +1576,8 @@ static const struct raw_op init_ops[] = {
 	{OP_WR_E1H, QM_REG_PQ2PCIFUNC_6, 0x5},
 	{OP_WR_E1H, QM_REG_PQ2PCIFUNC_7, 0x7},
 	{OP_WR, QM_REG_CMINTEN, 0xff},
-#define QM_COMMON_END           1411
-#define PBF_COMMON_START        1411
+#define QM_COMMON_END           1374
+#define PBF_COMMON_START        1374
 	{OP_WR, PBF_REG_INIT, 0x1},
 	{OP_WR, PBF_REG_INIT_P4, 0x1},
 	{OP_WR, PBF_REG_MAC_LB_ENABLE, 0x1},
@@ -1622,20 +1585,20 @@ static const struct raw_op init_ops[] = {
 	{OP_WR, PBF_REG_INIT_P4, 0x0},
 	{OP_WR, PBF_REG_INIT, 0x0},
 	{OP_WR, PBF_REG_DISABLE_NEW_TASK_PROC_P4, 0x0},
-#define PBF_COMMON_END          1418
-#define PBF_PORT0_START         1418
+#define PBF_COMMON_END          1381
+#define PBF_PORT0_START         1381
 	{OP_WR, PBF_REG_INIT_P0, 0x1},
 	{OP_WR, PBF_REG_MAC_IF0_ENABLE, 0x1},
 	{OP_WR, PBF_REG_INIT_P0, 0x0},
 	{OP_WR, PBF_REG_DISABLE_NEW_TASK_PROC_P0, 0x0},
-#define PBF_PORT0_END           1422
-#define PBF_PORT1_START         1422
+#define PBF_PORT0_END           1385
+#define PBF_PORT1_START         1385
 	{OP_WR, PBF_REG_INIT_P1, 0x1},
 	{OP_WR, PBF_REG_MAC_IF1_ENABLE, 0x1},
 	{OP_WR, PBF_REG_INIT_P1, 0x0},
 	{OP_WR, PBF_REG_DISABLE_NEW_TASK_PROC_P1, 0x0},
-#define PBF_PORT1_END           1426
-#define XCM_COMMON_START        1426
+#define PBF_PORT1_END           1389
+#define XCM_COMMON_START        1389
 	{OP_WR, XCM_REG_XX_OVFL_EVNT_ID, 0x32},
 	{OP_WR, XCM_REG_XQM_XCM_HDR_P, 0x3150020},
 	{OP_WR, XCM_REG_XQM_XCM_HDR_S, 0x3150020},
@@ -1670,7 +1633,7 @@ static const struct raw_op init_ops[] = {
 	{OP_WR_E1, XCM_REG_XX_MSG_NUM, 0x1f},
 	{OP_WR_E1H, XCM_REG_XX_MSG_NUM, 0x20},
 	{OP_ZR, XCM_REG_XX_TABLE, 0x12},
-	{OP_SW_E1, XCM_REG_XX_DESCR_TABLE, 0x1f02ce},
+	{OP_SW_E1, XCM_REG_XX_DESCR_TABLE, 0x1f02cc},
 	{OP_SW_E1H, XCM_REG_XX_DESCR_TABLE, 0x1f0302},
 	{OP_WR, XCM_REG_N_SM_CTX_LD_0, 0xf},
 	{OP_WR, XCM_REG_N_SM_CTX_LD_1, 0x7},
@@ -1700,8 +1663,8 @@ static const struct raw_op init_ops[] = {
 	{OP_WR, XCM_REG_CDU_SM_WR_IFEN, 0x1},
 	{OP_WR, XCM_REG_CDU_SM_RD_IFEN, 0x1},
 	{OP_WR, XCM_REG_XCM_CFC_IFEN, 0x1},
-#define XCM_COMMON_END          1490
-#define XCM_PORT0_START         1490
+#define XCM_COMMON_END          1453
+#define XCM_PORT0_START         1453
 	{OP_WR_E1, XCM_REG_GLB_DEL_ACK_TMR_VAL_0, 0xc8},
 	{OP_WR_E1, XCM_REG_GLB_DEL_ACK_MAX_CNT_0, 0x2},
 	{OP_WR_E1, XCM_REG_WU_DA_SET_TMR_CNT_FLG_CMD00, 0x0},
@@ -1710,8 +1673,8 @@ static const struct raw_op init_ops[] = {
 	{OP_WR_E1, XCM_REG_WU_DA_CNT_CMD10, 0x2},
 	{OP_WR_E1, XCM_REG_WU_DA_CNT_UPD_VAL00, 0xff},
 	{OP_WR_E1, XCM_REG_WU_DA_CNT_UPD_VAL10, 0xff},
-#define XCM_PORT0_END           1498
-#define XCM_PORT1_START         1498
+#define XCM_PORT0_END           1461
+#define XCM_PORT1_START         1461
 	{OP_WR_E1, XCM_REG_GLB_DEL_ACK_TMR_VAL_1, 0xc8},
 	{OP_WR_E1, XCM_REG_GLB_DEL_ACK_MAX_CNT_1, 0x2},
 	{OP_WR_E1, XCM_REG_WU_DA_SET_TMR_CNT_FLG_CMD01, 0x0},
@@ -1720,8 +1683,8 @@ static const struct raw_op init_ops[] = {
 	{OP_WR_E1, XCM_REG_WU_DA_CNT_CMD11, 0x2},
 	{OP_WR_E1, XCM_REG_WU_DA_CNT_UPD_VAL01, 0xff},
 	{OP_WR_E1, XCM_REG_WU_DA_CNT_UPD_VAL11, 0xff},
-#define XCM_PORT1_END           1506
-#define XCM_FUNC0_START         1506
+#define XCM_PORT1_END           1469
+#define XCM_FUNC0_START         1469
 	{OP_WR_E1H, XCM_REG_GLB_DEL_ACK_TMR_VAL_0, 0xc8},
 	{OP_WR_E1H, XCM_REG_GLB_DEL_ACK_MAX_CNT_0, 0x2},
 	{OP_WR_E1H, XCM_REG_WU_DA_SET_TMR_CNT_FLG_CMD00, 0x0},
@@ -1731,8 +1694,8 @@ static const struct raw_op init_ops[] = {
 	{OP_WR_E1H, XCM_REG_WU_DA_CNT_UPD_VAL00, 0xff},
 	{OP_WR_E1H, XCM_REG_WU_DA_CNT_UPD_VAL10, 0xff},
 	{OP_WR_E1H, XCM_REG_PHYS_QNUM3_0, 0x0},
-#define XCM_FUNC0_END           1515
-#define XCM_FUNC1_START         1515
+#define XCM_FUNC0_END           1478
+#define XCM_FUNC1_START         1478
 	{OP_WR_E1H, XCM_REG_GLB_DEL_ACK_TMR_VAL_1, 0xc8},
 	{OP_WR_E1H, XCM_REG_GLB_DEL_ACK_MAX_CNT_1, 0x2},
 	{OP_WR_E1H, XCM_REG_WU_DA_SET_TMR_CNT_FLG_CMD01, 0x0},
@@ -1742,8 +1705,8 @@ static const struct raw_op init_ops[] = {
 	{OP_WR_E1H, XCM_REG_WU_DA_CNT_UPD_VAL01, 0xff},
 	{OP_WR_E1H, XCM_REG_WU_DA_CNT_UPD_VAL11, 0xff},
 	{OP_WR_E1H, XCM_REG_PHYS_QNUM3_1, 0x0},
-#define XCM_FUNC1_END           1524
-#define XCM_FUNC2_START         1524
+#define XCM_FUNC1_END           1487
+#define XCM_FUNC2_START         1487
 	{OP_WR_E1H, XCM_REG_GLB_DEL_ACK_TMR_VAL_0, 0xc8},
 	{OP_WR_E1H, XCM_REG_GLB_DEL_ACK_MAX_CNT_0, 0x2},
 	{OP_WR_E1H, XCM_REG_WU_DA_SET_TMR_CNT_FLG_CMD00, 0x0},
@@ -1753,8 +1716,8 @@ static const struct raw_op init_ops[] = {
 	{OP_WR_E1H, XCM_REG_WU_DA_CNT_UPD_VAL00, 0xff},
 	{OP_WR_E1H, XCM_REG_WU_DA_CNT_UPD_VAL10, 0xff},
 	{OP_WR_E1H, XCM_REG_PHYS_QNUM3_0, 0x0},
-#define XCM_FUNC2_END           1533
-#define XCM_FUNC3_START         1533
+#define XCM_FUNC2_END           1496
+#define XCM_FUNC3_START         1496
 	{OP_WR_E1H, XCM_REG_GLB_DEL_ACK_TMR_VAL_1, 0xc8},
 	{OP_WR_E1H, XCM_REG_GLB_DEL_ACK_MAX_CNT_1, 0x2},
 	{OP_WR_E1H, XCM_REG_WU_DA_SET_TMR_CNT_FLG_CMD01, 0x0},
@@ -1764,8 +1727,8 @@ static const struct raw_op init_ops[] = {
 	{OP_WR_E1H, XCM_REG_WU_DA_CNT_UPD_VAL01, 0xff},
 	{OP_WR_E1H, XCM_REG_WU_DA_CNT_UPD_VAL11, 0xff},
 	{OP_WR_E1H, XCM_REG_PHYS_QNUM3_1, 0x0},
-#define XCM_FUNC3_END           1542
-#define XCM_FUNC4_START         1542
+#define XCM_FUNC3_END           1505
+#define XCM_FUNC4_START         1505
 	{OP_WR_E1H, XCM_REG_GLB_DEL_ACK_TMR_VAL_0, 0xc8},
 	{OP_WR_E1H, XCM_REG_GLB_DEL_ACK_MAX_CNT_0, 0x2},
 	{OP_WR_E1H, XCM_REG_WU_DA_SET_TMR_CNT_FLG_CMD00, 0x0},
@@ -1775,8 +1738,8 @@ static const struct raw_op init_ops[] = {
 	{OP_WR_E1H, XCM_REG_WU_DA_CNT_UPD_VAL00, 0xff},
 	{OP_WR_E1H, XCM_REG_WU_DA_CNT_UPD_VAL10, 0xff},
 	{OP_WR_E1H, XCM_REG_PHYS_QNUM3_0, 0x0},
-#define XCM_FUNC4_END           1551
-#define XCM_FUNC5_START         1551
+#define XCM_FUNC4_END           1514
+#define XCM_FUNC5_START         1514
 	{OP_WR_E1H, XCM_REG_GLB_DEL_ACK_TMR_VAL_1, 0xc8},
 	{OP_WR_E1H, XCM_REG_GLB_DEL_ACK_MAX_CNT_1, 0x2},
 	{OP_WR_E1H, XCM_REG_WU_DA_SET_TMR_CNT_FLG_CMD01, 0x0},
@@ -1786,8 +1749,8 @@ static const struct raw_op init_ops[] = {
 	{OP_WR_E1H, XCM_REG_WU_DA_CNT_UPD_VAL01, 0xff},
 	{OP_WR_E1H, XCM_REG_WU_DA_CNT_UPD_VAL11, 0xff},
 	{OP_WR_E1H, XCM_REG_PHYS_QNUM3_1, 0x0},
-#define XCM_FUNC5_END           1560
-#define XCM_FUNC6_START         1560
+#define XCM_FUNC5_END           1523
+#define XCM_FUNC6_START         1523
 	{OP_WR_E1H, XCM_REG_GLB_DEL_ACK_TMR_VAL_0, 0xc8},
 	{OP_WR_E1H, XCM_REG_GLB_DEL_ACK_MAX_CNT_0, 0x2},
 	{OP_WR_E1H, XCM_REG_WU_DA_SET_TMR_CNT_FLG_CMD00, 0x0},
@@ -1797,8 +1760,8 @@ static const struct raw_op init_ops[] = {
 	{OP_WR_E1H, XCM_REG_WU_DA_CNT_UPD_VAL00, 0xff},
 	{OP_WR_E1H, XCM_REG_WU_DA_CNT_UPD_VAL10, 0xff},
 	{OP_WR_E1H, XCM_REG_PHYS_QNUM3_0, 0x0},
-#define XCM_FUNC6_END           1569
-#define XCM_FUNC7_START         1569
+#define XCM_FUNC6_END           1532
+#define XCM_FUNC7_START         1532
 	{OP_WR_E1H, XCM_REG_GLB_DEL_ACK_TMR_VAL_1, 0xc8},
 	{OP_WR_E1H, XCM_REG_GLB_DEL_ACK_MAX_CNT_1, 0x2},
 	{OP_WR_E1H, XCM_REG_WU_DA_SET_TMR_CNT_FLG_CMD01, 0x0},
@@ -1808,8 +1771,8 @@ static const struct raw_op init_ops[] = {
 	{OP_WR_E1H, XCM_REG_WU_DA_CNT_UPD_VAL01, 0xff},
 	{OP_WR_E1H, XCM_REG_WU_DA_CNT_UPD_VAL11, 0xff},
 	{OP_WR_E1H, XCM_REG_PHYS_QNUM3_1, 0x0},
-#define XCM_FUNC7_END           1578
-#define XSEM_COMMON_START       1578
+#define XCM_FUNC7_END           1541
+#define XSEM_COMMON_START       1541
 	{OP_RD, XSEM_REG_MSG_NUM_FIC0, 0x0},
 	{OP_RD, XSEM_REG_MSG_NUM_FIC1, 0x0},
 	{OP_RD, XSEM_REG_MSG_NUM_FOC0, 0x0},
@@ -1876,9 +1839,9 @@ static const struct raw_op init_ops[] = {
 	{OP_ZR_E1H, XSEM_REG_FAST_MEMORY + 0x9000, 0x2},
 	{OP_WR_E1, XSEM_REG_FAST_MEMORY + 0x3368, 0x0},
 	{OP_ZR_E1H, XSEM_REG_FAST_MEMORY + 0x21a8, 0x86},
-	{OP_SW_E1, XSEM_REG_FAST_MEMORY + 0x3370, 0x202ed},
+	{OP_SW_E1, XSEM_REG_FAST_MEMORY + 0x3370, 0x202eb},
 	{OP_ZR_E1H, XSEM_REG_FAST_MEMORY + 0x2000, 0x20},
-	{OP_SW_E1, XSEM_REG_FAST_MEMORY + 0x3b90, 0x402ef},
+	{OP_SW_E1, XSEM_REG_FAST_MEMORY + 0x3b90, 0x402ed},
 	{OP_WR_E1H, XSEM_REG_FAST_MEMORY + 0x23c8, 0x0},
 	{OP_WR_E1, XSEM_REG_FAST_MEMORY + 0x1518, 0x1},
 	{OP_SW_E1H, XSEM_REG_FAST_MEMORY + 0x23d0, 0x20321},
@@ -1886,29 +1849,29 @@ static const struct raw_op init_ops[] = {
 	{OP_SW_E1H, XSEM_REG_FAST_MEMORY + 0x2498, 0x40323},
 	{OP_WR_E1, XSEM_REG_FAST_MEMORY + 0x1838, 0x0},
 	{OP_WR_E1H, XSEM_REG_FAST_MEMORY + 0x2ac8, 0x0},
-	{OP_SW_E1, XSEM_REG_FAST_MEMORY + 0x1820, 0x202f3},
+	{OP_SW_E1, XSEM_REG_FAST_MEMORY + 0x1820, 0x202f1},
 	{OP_WR_E1H, XSEM_REG_FAST_MEMORY + 0x2ab8, 0x0},
 	{OP_ZR_E1, XSEM_REG_FAST_MEMORY + 0x4ac0, 0x2},
 	{OP_WR_E1H, XSEM_REG_FAST_MEMORY + 0x3010, 0x1},
 	{OP_ZR_E1, XSEM_REG_FAST_MEMORY + 0x4b00, 0x4},
 	{OP_ZR_E1H, XSEM_REG_FAST_MEMORY + 0x4040, 0x10},
-	{OP_SW_E1, XSEM_REG_FAST_MEMORY + 0x1f50, 0x202f5},
+	{OP_SW_E1, XSEM_REG_FAST_MEMORY + 0x1f50, 0x202f3},
 	{OP_SW_E1H, XSEM_REG_FAST_MEMORY + 0x4000, 0x100327},
 	{OP_ZR_E1H, XSEM_REG_FAST_MEMORY + 0x6ac0, 0x2},
 	{OP_ZR_E1H, XSEM_REG_FAST_MEMORY + 0x6b00, 0x4},
 	{OP_SW_E1H, XSEM_REG_FAST_MEMORY + 0x83b0, 0x20337},
 	{OP_WR, XSEM_REG_FAST_MEMORY + 0x10800, 0x0},
-	{OP_SW_E1, XSEM_REG_FAST_MEMORY + 0x10c00, 0x1002f7},
+	{OP_SW_E1, XSEM_REG_FAST_MEMORY + 0x10c00, 0x1002f5},
 	{OP_SW_E1H, XSEM_REG_FAST_MEMORY + 0x10c00, 0x100339},
 	{OP_WR, XSEM_REG_FAST_MEMORY + 0x10800, 0x1000000},
-	{OP_SW_E1, XSEM_REG_FAST_MEMORY + 0x10c40, 0x80307},
+	{OP_SW_E1, XSEM_REG_FAST_MEMORY + 0x10c40, 0x80305},
 	{OP_SW_E1H, XSEM_REG_FAST_MEMORY + 0x10c40, 0x80349},
 	{OP_WR, XSEM_REG_FAST_MEMORY + 0x10800, 0x2000000},
-	{OP_SW_E1, XSEM_REG_FAST_MEMORY + 0x10c60, 0x8030f},
+	{OP_SW_E1, XSEM_REG_FAST_MEMORY + 0x10c60, 0x8030d},
 	{OP_SW_E1H, XSEM_REG_FAST_MEMORY + 0x10c60, 0x80351},
 	{OP_ZP_E1, XSEM_REG_INT_TABLE, 0xa90000},
 	{OP_ZP_E1H, XSEM_REG_INT_TABLE, 0xac0000},
-	{OP_WR_64_E1, XSEM_REG_INT_TABLE + 0x368, 0x130317},
+	{OP_WR_64_E1, XSEM_REG_INT_TABLE + 0x368, 0x130315},
 	{OP_WR_64_E1H, XSEM_REG_INT_TABLE + 0x368, 0x130359},
 	{OP_ZP_E1, XSEM_REG_PRAM, 0x344e0000},
 	{OP_ZP_E1H, XSEM_REG_PRAM, 0x34620000},
@@ -1918,10 +1881,10 @@ static const struct raw_op init_ops[] = {
 	{OP_ZP_E1H, XSEM_REG_PRAM + 0x10000, 0x3e971b22},
 	{OP_ZP_E1, XSEM_REG_PRAM + 0x18000, 0x1dd02ad2},
 	{OP_ZP_E1H, XSEM_REG_PRAM + 0x18000, 0x21542ac8},
-	{OP_WR_64_E1, XSEM_REG_PRAM + 0x1c0d0, 0x47e60319},
+	{OP_WR_64_E1, XSEM_REG_PRAM + 0x1c0d0, 0x47e60317},
 	{OP_WR_64_E1H, XSEM_REG_PRAM + 0x1c8d0, 0x46e6035b},
-#define XSEM_COMMON_END         1688
-#define XSEM_PORT0_START        1688
+#define XSEM_COMMON_END         1651
+#define XSEM_PORT0_START        1651
 	{OP_ZR_E1, XSEM_REG_FAST_MEMORY + 0x3ba0, 0x10},
 	{OP_ZR_E1H, XSEM_REG_FAST_MEMORY + 0xc000, 0xfc},
 	{OP_ZR_E1, XSEM_REG_FAST_MEMORY + 0x3c20, 0x1c},
@@ -1934,7 +1897,7 @@ static const struct raw_op init_ops[] = {
 	{OP_ZR_E1H, XSEM_REG_FAST_MEMORY + 0x26e8, 0x1c},
 	{OP_WR_E1, XSEM_REG_FAST_MEMORY + 0x3b58, 0x0},
 	{OP_ZR_E1H, XSEM_REG_FAST_MEMORY + 0x27c8, 0x1c},
-	{OP_SW_E1, XSEM_REG_FAST_MEMORY + 0x3d10, 0x10031b},
+	{OP_SW_E1, XSEM_REG_FAST_MEMORY + 0x3d10, 0x100319},
 	{OP_ZR_E1H, XSEM_REG_FAST_MEMORY + 0xa000, 0x28},
 	{OP_WR_E1, XSEM_REG_FAST_MEMORY + 0x1500, 0x0},
 	{OP_ZR_E1H, XSEM_REG_FAST_MEMORY + 0xa140, 0xc},
@@ -1950,12 +1913,12 @@ static const struct raw_op init_ops[] = {
 	{OP_SW_E1H, XSEM_REG_FAST_MEMORY + 0x6ac8, 0x2035d},
 	{OP_WR_E1, XSEM_REG_FAST_MEMORY + 0x50b8, 0x1},
 	{OP_ZR_E1H, XSEM_REG_FAST_MEMORY + 0x6b10, 0x42},
-	{OP_SW_E1, XSEM_REG_FAST_MEMORY + 0x4ac8, 0x2032b},
+	{OP_SW_E1, XSEM_REG_FAST_MEMORY + 0x4ac8, 0x20329},
 	{OP_ZR_E1H, XSEM_REG_FAST_MEMORY + 0x6d20, 0x4},
 	{OP_ZR_E1, XSEM_REG_FAST_MEMORY + 0x4b10, 0x42},
 	{OP_ZR_E1, XSEM_REG_FAST_MEMORY + 0x4d20, 0x4},
-#define XSEM_PORT0_END          1720
-#define XSEM_PORT1_START        1720
+#define XSEM_PORT0_END          1683
+#define XSEM_PORT1_START        1683
 	{OP_ZR_E1, XSEM_REG_FAST_MEMORY + 0x3be0, 0x10},
 	{OP_ZR_E1H, XSEM_REG_FAST_MEMORY + 0xc3f0, 0xfc},
 	{OP_ZR_E1, XSEM_REG_FAST_MEMORY + 0x3c90, 0x1c},
@@ -1968,7 +1931,7 @@ static const struct raw_op init_ops[] = {
 	{OP_ZR_E1H, XSEM_REG_FAST_MEMORY + 0x2758, 0x1c},
 	{OP_WR_E1, XSEM_REG_FAST_MEMORY + 0x3b5c, 0x0},
 	{OP_ZR_E1H, XSEM_REG_FAST_MEMORY + 0x2838, 0x1c},
-	{OP_SW_E1, XSEM_REG_FAST_MEMORY + 0x3d50, 0x10032d},
+	{OP_SW_E1, XSEM_REG_FAST_MEMORY + 0x3d50, 0x10032b},
 	{OP_ZR_E1H, XSEM_REG_FAST_MEMORY + 0xa0a0, 0x28},
 	{OP_WR_E1, XSEM_REG_FAST_MEMORY + 0x1504, 0x0},
 	{OP_ZR_E1H, XSEM_REG_FAST_MEMORY + 0xa170, 0xc},
@@ -1984,65 +1947,65 @@ static const struct raw_op init_ops[] = {
 	{OP_SW_E1H, XSEM_REG_FAST_MEMORY + 0x6ad0, 0x2035f},
 	{OP_WR_E1, XSEM_REG_FAST_MEMORY + 0x50bc, 0x1},
 	{OP_ZR_E1H, XSEM_REG_FAST_MEMORY + 0x6c18, 0x42},
-	{OP_SW_E1, XSEM_REG_FAST_MEMORY + 0x4ad0, 0x2033d},
+	{OP_SW_E1, XSEM_REG_FAST_MEMORY + 0x4ad0, 0x2033b},
 	{OP_ZR_E1H, XSEM_REG_FAST_MEMORY + 0x6d30, 0x4},
 	{OP_ZR_E1, XSEM_REG_FAST_MEMORY + 0x4c18, 0x42},
 	{OP_ZR_E1, XSEM_REG_FAST_MEMORY + 0x4d30, 0x4},
-#define XSEM_PORT1_END          1752
-#define XSEM_FUNC0_START        1752
+#define XSEM_PORT1_END          1715
+#define XSEM_FUNC0_START        1715
 	{OP_WR_E1H, XSEM_REG_FAST_MEMORY + 0xc7e0, 0x0},
 	{OP_SW_E1H, XSEM_REG_FAST_MEMORY + 0x28b8, 0x100361},
 	{OP_ZR_E1H, XSEM_REG_FAST_MEMORY + 0x5048, 0xe},
-#define XSEM_FUNC0_END          1755
-#define XSEM_FUNC1_START        1755
+#define XSEM_FUNC0_END          1718
+#define XSEM_FUNC1_START        1718
 	{OP_WR_E1H, XSEM_REG_FAST_MEMORY + 0xc7e4, 0x0},
 	{OP_SW_E1H, XSEM_REG_FAST_MEMORY + 0x28f8, 0x100371},
 	{OP_ZR_E1H, XSEM_REG_FAST_MEMORY + 0x5080, 0xe},
-#define XSEM_FUNC1_END          1758
-#define XSEM_FUNC2_START        1758
+#define XSEM_FUNC1_END          1721
+#define XSEM_FUNC2_START        1721
 	{OP_WR_E1H, XSEM_REG_FAST_MEMORY + 0xc7e8, 0x0},
 	{OP_SW_E1H, XSEM_REG_FAST_MEMORY + 0x2938, 0x100381},
 	{OP_ZR_E1H, XSEM_REG_FAST_MEMORY + 0x50b8, 0xe},
-#define XSEM_FUNC2_END          1761
-#define XSEM_FUNC3_START        1761
+#define XSEM_FUNC2_END          1724
+#define XSEM_FUNC3_START        1724
 	{OP_WR_E1H, XSEM_REG_FAST_MEMORY + 0xc7ec, 0x0},
 	{OP_SW_E1H, XSEM_REG_FAST_MEMORY + 0x2978, 0x100391},
 	{OP_ZR_E1H, XSEM_REG_FAST_MEMORY + 0x50f0, 0xe},
-#define XSEM_FUNC3_END          1764
-#define XSEM_FUNC4_START        1764
+#define XSEM_FUNC3_END          1727
+#define XSEM_FUNC4_START        1727
 	{OP_WR_E1H, XSEM_REG_FAST_MEMORY + 0xc7f0, 0x0},
 	{OP_SW_E1H, XSEM_REG_FAST_MEMORY + 0x29b8, 0x1003a1},
 	{OP_ZR_E1H, XSEM_REG_FAST_MEMORY + 0x5128, 0xe},
-#define XSEM_FUNC4_END          1767
-#define XSEM_FUNC5_START        1767
+#define XSEM_FUNC4_END          1730
+#define XSEM_FUNC5_START        1730
 	{OP_WR_E1H, XSEM_REG_FAST_MEMORY + 0xc7f4, 0x0},
 	{OP_SW_E1H, XSEM_REG_FAST_MEMORY + 0x29f8, 0x1003b1},
 	{OP_ZR_E1H, XSEM_REG_FAST_MEMORY + 0x5160, 0xe},
-#define XSEM_FUNC5_END          1770
-#define XSEM_FUNC6_START        1770
+#define XSEM_FUNC5_END          1733
+#define XSEM_FUNC6_START        1733
 	{OP_WR_E1H, XSEM_REG_FAST_MEMORY + 0xc7f8, 0x0},
 	{OP_SW_E1H, XSEM_REG_FAST_MEMORY + 0x2a38, 0x1003c1},
 	{OP_ZR_E1H, XSEM_REG_FAST_MEMORY + 0x5198, 0xe},
-#define XSEM_FUNC6_END          1773
-#define XSEM_FUNC7_START        1773
+#define XSEM_FUNC6_END          1736
+#define XSEM_FUNC7_START        1736
 	{OP_WR_E1H, XSEM_REG_FAST_MEMORY + 0xc7fc, 0x0},
 	{OP_SW_E1H, XSEM_REG_FAST_MEMORY + 0x2a78, 0x1003d1},
 	{OP_ZR_E1H, XSEM_REG_FAST_MEMORY + 0x51d0, 0xe},
-#define XSEM_FUNC7_END          1776
-#define CDU_COMMON_START        1776
+#define XSEM_FUNC7_END          1739
+#define CDU_COMMON_START        1739
 	{OP_WR, CDU_REG_CDU_CONTROL0, 0x1},
 	{OP_WR_E1H, CDU_REG_MF_MODE, 0x1},
 	{OP_WR, CDU_REG_CDU_CHK_MASK0, 0x3d000},
 	{OP_WR, CDU_REG_CDU_CHK_MASK1, 0x3d},
-	{OP_WB_E1, CDU_REG_L1TT, 0x200033f},
+	{OP_WB_E1, CDU_REG_L1TT, 0x200033d},
 	{OP_WB_E1H, CDU_REG_L1TT, 0x20003e1},
-	{OP_WB_E1, CDU_REG_MATT, 0x20053f},
+	{OP_WB_E1, CDU_REG_MATT, 0x20053d},
 	{OP_WB_E1H, CDU_REG_MATT, 0x2805e1},
 	{OP_ZR_E1, CDU_REG_MATT + 0x80, 0x2},
-	{OP_WB_E1, CDU_REG_MATT + 0x88, 0x6055f},
+	{OP_WB_E1, CDU_REG_MATT + 0x88, 0x6055d},
 	{OP_ZR, CDU_REG_MATT + 0xa0, 0x18},
-#define CDU_COMMON_END          1787
-#define DMAE_COMMON_START       1787
+#define CDU_COMMON_END          1750
+#define DMAE_COMMON_START       1750
 	{OP_ZR, DMAE_REG_CMD_MEM, 0xe0},
 	{OP_WR, DMAE_REG_CRC16C_INIT, 0x0},
 	{OP_WR, DMAE_REG_CRC16T10_INIT, 0x1},
@@ -2050,24 +2013,24 @@ static const struct raw_op init_ops[] = {
 	{OP_WR_E1H, DMAE_REG_PXP_REQ_INIT_CRD, 0x2},
 	{OP_WR, DMAE_REG_PCI_IFEN, 0x1},
 	{OP_WR, DMAE_REG_GRC_IFEN, 0x1},
-#define DMAE_COMMON_END         1794
-#define PXP_COMMON_START        1794
-	{OP_WB_E1, PXP_REG_HST_INBOUND_INT + 0x400, 0x50565},
+#define DMAE_COMMON_END         1757
+#define PXP_COMMON_START        1757
+	{OP_WB_E1, PXP_REG_HST_INBOUND_INT + 0x400, 0x50563},
 	{OP_WB_E1H, PXP_REG_HST_INBOUND_INT + 0x400, 0x50609},
-	{OP_WB_E1, PXP_REG_HST_INBOUND_INT + 0x420, 0x5056a},
+	{OP_WB_E1, PXP_REG_HST_INBOUND_INT + 0x420, 0x50568},
 	{OP_WB_E1H, PXP_REG_HST_INBOUND_INT, 0x5060e},
-	{OP_WB_E1, PXP_REG_HST_INBOUND_INT, 0x5056f},
-#define PXP_COMMON_END          1799
-#define CFC_COMMON_START        1799
+	{OP_WB_E1, PXP_REG_HST_INBOUND_INT, 0x5056d},
+#define PXP_COMMON_END          1762
+#define CFC_COMMON_START        1762
 	{OP_ZR_E1H, CFC_REG_LINK_LIST, 0x100},
 	{OP_WR, CFC_REG_CONTROL0, 0x10},
 	{OP_WR, CFC_REG_DISABLE_ON_ERROR, 0x3fff},
 	{OP_WR, CFC_REG_LCREQ_WEIGHTS, 0x84924a},
-#define CFC_COMMON_END          1803
-#define HC_COMMON_START         1803
+#define CFC_COMMON_END          1766
+#define HC_COMMON_START         1766
 	{OP_ZR_E1, HC_REG_USTORM_ADDR_FOR_COALESCE, 0x4},
-#define HC_COMMON_END           1804
-#define HC_PORT0_START          1804
+#define HC_COMMON_END           1767
+#define HC_PORT0_START          1767
 	{OP_WR_E1, HC_REG_CONFIG_0, 0x1080},
 	{OP_ZR_E1, HC_REG_UC_RAM_ADDR_0, 0x2},
 	{OP_WR_E1, HC_REG_ATTN_NUM_P0, 0x10},
@@ -2086,8 +2049,8 @@ static const struct raw_op init_ops[] = {
 	{OP_ZR_E1, HC_REG_STATISTIC_COUNTERS + 0x120, 0x4a},
 	{OP_ZR_E1, HC_REG_STATISTIC_COUNTERS + 0x370, 0x4a},
 	{OP_ZR_E1, HC_REG_STATISTIC_COUNTERS + 0x5c0, 0x4a},
-#define HC_PORT0_END            1822
-#define HC_PORT1_START          1822
+#define HC_PORT0_END            1785
+#define HC_PORT1_START          1785
 	{OP_WR_E1, HC_REG_CONFIG_1, 0x1080},
 	{OP_ZR_E1, HC_REG_UC_RAM_ADDR_1, 0x2},
 	{OP_WR_E1, HC_REG_ATTN_NUM_P1, 0x10},
@@ -2106,8 +2069,8 @@ static const struct raw_op init_ops[] = {
 	{OP_ZR_E1, HC_REG_STATISTIC_COUNTERS + 0x248, 0x4a},
 	{OP_ZR_E1, HC_REG_STATISTIC_COUNTERS + 0x498, 0x4a},
 	{OP_ZR_E1, HC_REG_STATISTIC_COUNTERS + 0x6e8, 0x4a},
-#define HC_PORT1_END            1840
-#define HC_FUNC0_START          1840
+#define HC_PORT1_END            1803
+#define HC_FUNC0_START          1803
 	{OP_WR_E1H, HC_REG_CONFIG_0, 0x1080},
 	{OP_WR_E1H, HC_REG_FUNC_NUM_P0, 0x0},
 	{OP_WR_E1H, HC_REG_ATTN_NUM_P0, 0x10},
@@ -2123,8 +2086,8 @@ static const struct raw_op init_ops[] = {
 	{OP_ZR_E1H, HC_REG_STATISTIC_COUNTERS + 0x120, 0x4a},
 	{OP_ZR_E1H, HC_REG_STATISTIC_COUNTERS + 0x370, 0x4a},
 	{OP_ZR_E1H, HC_REG_STATISTIC_COUNTERS + 0x5c0, 0x4a},
-#define HC_FUNC0_END            1855
-#define HC_FUNC1_START          1855
+#define HC_FUNC0_END            1818
+#define HC_FUNC1_START          1818
 	{OP_WR_E1H, HC_REG_CONFIG_1, 0x1080},
 	{OP_WR_E1H, HC_REG_FUNC_NUM_P1, 0x1},
 	{OP_WR_E1H, HC_REG_ATTN_NUM_P1, 0x10},
@@ -2140,8 +2103,8 @@ static const struct raw_op init_ops[] = {
 	{OP_ZR_E1H, HC_REG_STATISTIC_COUNTERS + 0x248, 0x4a},
 	{OP_ZR_E1H, HC_REG_STATISTIC_COUNTERS + 0x498, 0x4a},
 	{OP_ZR_E1H, HC_REG_STATISTIC_COUNTERS + 0x6e8, 0x4a},
-#define HC_FUNC1_END            1870
-#define HC_FUNC2_START          1870
+#define HC_FUNC1_END            1833
+#define HC_FUNC2_START          1833
 	{OP_WR_E1H, HC_REG_CONFIG_0, 0x1080},
 	{OP_WR_E1H, HC_REG_FUNC_NUM_P0, 0x2},
 	{OP_WR_E1H, HC_REG_ATTN_NUM_P0, 0x10},
@@ -2157,8 +2120,8 @@ static const struct raw_op init_ops[] = {
 	{OP_ZR_E1H, HC_REG_STATISTIC_COUNTERS + 0x120, 0x4a},
 	{OP_ZR_E1H, HC_REG_STATISTIC_COUNTERS + 0x370, 0x4a},
 	{OP_ZR_E1H, HC_REG_STATISTIC_COUNTERS + 0x5c0, 0x4a},
-#define HC_FUNC2_END            1885
-#define HC_FUNC3_START          1885
+#define HC_FUNC2_END            1848
+#define HC_FUNC3_START          1848
 	{OP_WR_E1H, HC_REG_CONFIG_1, 0x1080},
 	{OP_WR_E1H, HC_REG_FUNC_NUM_P1, 0x3},
 	{OP_WR_E1H, HC_REG_ATTN_NUM_P1, 0x10},
@@ -2174,8 +2137,8 @@ static const struct raw_op init_ops[] = {
 	{OP_ZR_E1H, HC_REG_STATISTIC_COUNTERS + 0x248, 0x4a},
 	{OP_ZR_E1H, HC_REG_STATISTIC_COUNTERS + 0x498, 0x4a},
 	{OP_ZR_E1H, HC_REG_STATISTIC_COUNTERS + 0x6e8, 0x4a},
-#define HC_FUNC3_END            1900
-#define HC_FUNC4_START          1900
+#define HC_FUNC3_END            1863
+#define HC_FUNC4_START          1863
 	{OP_WR_E1H, HC_REG_CONFIG_0, 0x1080},
 	{OP_WR_E1H, HC_REG_FUNC_NUM_P0, 0x4},
 	{OP_WR_E1H, HC_REG_ATTN_NUM_P0, 0x10},
@@ -2191,8 +2154,8 @@ static const struct raw_op init_ops[] = {
 	{OP_ZR_E1H, HC_REG_STATISTIC_COUNTERS + 0x120, 0x4a},
 	{OP_ZR_E1H, HC_REG_STATISTIC_COUNTERS + 0x370, 0x4a},
 	{OP_ZR_E1H, HC_REG_STATISTIC_COUNTERS + 0x5c0, 0x4a},
-#define HC_FUNC4_END            1915
-#define HC_FUNC5_START          1915
+#define HC_FUNC4_END            1878
+#define HC_FUNC5_START          1878
 	{OP_WR_E1H, HC_REG_CONFIG_1, 0x1080},
 	{OP_WR_E1H, HC_REG_FUNC_NUM_P1, 0x5},
 	{OP_WR_E1H, HC_REG_ATTN_NUM_P1, 0x10},
@@ -2208,8 +2171,8 @@ static const struct raw_op init_ops[] = {
 	{OP_ZR_E1H, HC_REG_STATISTIC_COUNTERS + 0x248, 0x4a},
 	{OP_ZR_E1H, HC_REG_STATISTIC_COUNTERS + 0x498, 0x4a},
 	{OP_ZR_E1H, HC_REG_STATISTIC_COUNTERS + 0x6e8, 0x4a},
-#define HC_FUNC5_END            1930
-#define HC_FUNC6_START          1930
+#define HC_FUNC5_END            1893
+#define HC_FUNC6_START          1893
 	{OP_WR_E1H, HC_REG_CONFIG_0, 0x1080},
 	{OP_WR_E1H, HC_REG_FUNC_NUM_P0, 0x6},
 	{OP_WR_E1H, HC_REG_ATTN_NUM_P0, 0x10},
@@ -2225,8 +2188,8 @@ static const struct raw_op init_ops[] = {
 	{OP_ZR_E1H, HC_REG_STATISTIC_COUNTERS + 0x120, 0x4a},
 	{OP_ZR_E1H, HC_REG_STATISTIC_COUNTERS + 0x370, 0x4a},
 	{OP_ZR_E1H, HC_REG_STATISTIC_COUNTERS + 0x5c0, 0x4a},
-#define HC_FUNC6_END            1945
-#define HC_FUNC7_START          1945
+#define HC_FUNC6_END            1908
+#define HC_FUNC7_START          1908
 	{OP_WR_E1H, HC_REG_CONFIG_1, 0x1080},
 	{OP_WR_E1H, HC_REG_FUNC_NUM_P1, 0x7},
 	{OP_WR_E1H, HC_REG_ATTN_NUM_P1, 0x10},
@@ -2242,8 +2205,8 @@ static const struct raw_op init_ops[] = {
 	{OP_ZR_E1H, HC_REG_STATISTIC_COUNTERS + 0x248, 0x4a},
 	{OP_ZR_E1H, HC_REG_STATISTIC_COUNTERS + 0x498, 0x4a},
 	{OP_ZR_E1H, HC_REG_STATISTIC_COUNTERS + 0x6e8, 0x4a},
-#define HC_FUNC7_END            1960
-#define PXP2_COMMON_START       1960
+#define HC_FUNC7_END            1923
+#define PXP2_COMMON_START       1923
 	{OP_WR_E1, PXP2_REG_PGL_CONTROL0, 0xe38340},
 	{OP_WR_E1H, PXP2_REG_RQ_DRAM_ALIGN, 0x1},
 	{OP_WR, PXP2_REG_PGL_CONTROL1, 0x3c10},
@@ -2361,8 +2324,8 @@ static const struct raw_op init_ops[] = {
 	{OP_WR_E1H, PXP2_REG_RQ_ILT_MODE, 0x1},
 	{OP_WR, PXP2_REG_RQ_RBC_DONE, 0x1},
 	{OP_WR_E1H, PXP2_REG_PGL_CONTROL0, 0xe38340},
-#define PXP2_COMMON_END         2077
-#define MISC_AEU_COMMON_START   2077
+#define PXP2_COMMON_END         2040
+#define MISC_AEU_COMMON_START   2040
 	{OP_ZR, MISC_REG_AEU_GENERAL_ATTN_0, 0x16},
 	{OP_WR_E1H, MISC_REG_AEU_ENABLE1_NIG_0, 0x55540000},
 	{OP_WR_E1H, MISC_REG_AEU_ENABLE2_NIG_0, 0x55555555},
@@ -2382,8 +2345,8 @@ static const struct raw_op init_ops[] = {
 	{OP_WR_E1H, MISC_REG_AEU_ENABLE4_PXP_1, 0x0},
 	{OP_WR_E1H, MISC_REG_AEU_CLR_LATCH_SIGNAL, 0xc00},
 	{OP_WR_E1H, MISC_REG_AEU_GENERAL_MASK, 0x3},
-#define MISC_AEU_COMMON_END     2096
-#define MISC_AEU_PORT0_START    2096
+#define MISC_AEU_COMMON_END     2059
+#define MISC_AEU_PORT0_START    2059
 	{OP_WR_E1, MISC_REG_AEU_ENABLE1_FUNC_0_OUT_0, 0xbf5c0000},
 	{OP_WR_E1H, MISC_REG_AEU_ENABLE1_FUNC_0_OUT_0, 0xff5c0000},
 	{OP_WR_E1, MISC_REG_AEU_ENABLE2_FUNC_0_OUT_0, 0xfff51fef},
@@ -2416,8 +2379,8 @@ static const struct raw_op init_ops[] = {
 	{OP_WR_E1, MISC_REG_AEU_INVERTER_1_FUNC_0, 0x0},
 	{OP_ZR_E1, MISC_REG_AEU_INVERTER_2_FUNC_0, 0x3},
 	{OP_WR_E1, MISC_REG_AEU_MASK_ATTN_FUNC_0, 0x7},
-#define MISC_AEU_PORT0_END      2128
-#define MISC_AEU_PORT1_START    2128
+#define MISC_AEU_PORT0_END      2091
+#define MISC_AEU_PORT1_START    2091
 	{OP_WR_E1, MISC_REG_AEU_ENABLE1_FUNC_1_OUT_0, 0xbf5c0000},
 	{OP_WR_E1H, MISC_REG_AEU_ENABLE1_FUNC_1_OUT_0, 0xff5c0000},
 	{OP_WR_E1, MISC_REG_AEU_ENABLE2_FUNC_1_OUT_0, 0xfff51fef},
@@ -2450,7 +2413,7 @@ static const struct raw_op init_ops[] = {
 	{OP_WR_E1, MISC_REG_AEU_INVERTER_1_FUNC_1, 0x0},
 	{OP_ZR_E1, MISC_REG_AEU_INVERTER_2_FUNC_1, 0x3},
 	{OP_WR_E1, MISC_REG_AEU_MASK_ATTN_FUNC_1, 0x7},
-#define MISC_AEU_PORT1_END      2160
+#define MISC_AEU_PORT1_END      2123
 
 };
 
@@ -2560,103 +2523,92 @@ static const u32 init_data_e1[] = {
 	0x00049c00, 0x00051f80, 0x0005a300, 0x00062680, 0x0006aa00, 0x00072d80,
 	0x0007b100, 0x00083480, 0x0008b800, 0x00093b80, 0x0009bf00, 0x000a4280,
 	0x000ac600, 0x000b4980, 0x000bcd00, 0x000c5080, 0x000cd400, 0x000d5780,
-	0x000ddb00, 0x00001900, 0x00000028, 0x00000000, 0x00100000, 0x00000000,
-	0x00000000, 0xffffffff, 0x40000000, 0x40000000, 0x40000000, 0x40000000,
+	0x000ddb00, 0x00001900, 0x00100000, 0x00000000, 0x00000000, 0xffffffff,
 	0x40000000, 0x40000000, 0x40000000, 0x40000000, 0x40000000, 0x40000000,
 	0x40000000, 0x40000000, 0x40000000, 0x40000000, 0x40000000, 0x40000000,
 	0x40000000, 0x40000000, 0x40000000, 0x40000000, 0x40000000, 0x40000000,
 	0x40000000, 0x40000000, 0x40000000, 0x40000000, 0x40000000, 0x40000000,
-	0x40000000, 0x40000000, 0x40000000, 0x40000000, 0x00000000, 0x00007ff8,
-	0x00000000, 0x00001500, 0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff,
-	0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff, 0x40000000, 0x40000000,
 	0x40000000, 0x40000000, 0x40000000, 0x40000000, 0x40000000, 0x40000000,
+	0x40000000, 0x40000000, 0x00000000, 0x00007ff8, 0x00000000, 0x00001500,
+	0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff,
+	0xffffffff, 0xffffffff, 0x40000000, 0x40000000, 0x40000000, 0x40000000,
 	0x40000000, 0x40000000, 0x40000000, 0x40000000, 0x40000000, 0x40000000,
 	0x40000000, 0x40000000, 0x40000000, 0x40000000, 0x40000000, 0x40000000,
 	0x40000000, 0x40000000, 0x40000000, 0x40000000, 0x40000000, 0x40000000,
 	0x40000000, 0x40000000, 0x40000000, 0x40000000, 0x40000000, 0x40000000,
-	0x00000000, 0x00007ff8, 0x00000000, 0x00003500, 0x00001000, 0x00002080,
-	0x00003100, 0x00004180, 0x00005200, 0x00006280, 0x00007300, 0x00008380,
-	0x00009400, 0x0000a480, 0x0000b500, 0x0000c580, 0x0000d600, 0x0000e680,
-	0x0000f700, 0x00010780, 0x00011800, 0x00012880, 0x00013900, 0x00014980,
-	0x00015a00, 0x00016a80, 0x00017b00, 0x00018b80, 0x00019c00, 0x0001ac80,
-	0x0001bd00, 0x0001cd80, 0x0001de00, 0x0001ee80, 0x0001ff00, 0x00000000,
-	0x00010001, 0x00000604, 0xccccccc1, 0xffffffff, 0xffffffff, 0xcccc0201,
-	0xcccccccc, 0x00000000, 0xffffffff, 0x40000000, 0x40000000, 0x40000000,
+	0x40000000, 0x40000000, 0x40000000, 0x40000000, 0x00000000, 0x00007ff8,
+	0x00000000, 0x00003500, 0x00001000, 0x00002080, 0x00003100, 0x00004180,
+	0x00005200, 0x00006280, 0x00007300, 0x00008380, 0x00009400, 0x0000a480,
+	0x0000b500, 0x0000c580, 0x0000d600, 0x0000e680, 0x0000f700, 0x00010780,
+	0x00011800, 0x00012880, 0x00013900, 0x00014980, 0x00015a00, 0x00016a80,
+	0x00017b00, 0x00018b80, 0x00019c00, 0x0001ac80, 0x0001bd00, 0x0001cd80,
+	0x0001de00, 0x0001ee80, 0x0001ff00, 0x00000000, 0x00010001, 0x00000604,
+	0xccccccc1, 0xffffffff, 0xffffffff, 0xcccc0201, 0xcccccccc, 0x00000000,
+	0xffffffff, 0x40000000, 0x40000000, 0x40000000, 0x40000000, 0x40000000,
 	0x40000000, 0x40000000, 0x40000000, 0x40000000, 0x40000000, 0x40000000,
 	0x40000000, 0x40000000, 0x40000000, 0x40000000, 0x40000000, 0x40000000,
 	0x40000000, 0x40000000, 0x40000000, 0x40000000, 0x40000000, 0x40000000,
 	0x40000000, 0x40000000, 0x40000000, 0x40000000, 0x40000000, 0x40000000,
-	0x40000000, 0x40000000, 0x40000000, 0x40000000, 0x40000000, 0x00000000,
-	0x00007ff8, 0x00000000, 0x00003500, 0x0000ffff, 0x00000000, 0x0000ffff,
+	0x40000000, 0x40000000, 0x40000000, 0x00000000, 0x00007ff8, 0x00000000,
+	0x00003500, 0x0000ffff, 0x00000000, 0x0000ffff, 0x00000000, 0x0000ffff,
 	0x00000000, 0x0000ffff, 0x00000000, 0x0000ffff, 0x00000000, 0x0000ffff,
+	0x00000000, 0x0000ffff, 0x00000000, 0x0000ffff, 0x00000000, 0x00100000,
 	0x00000000, 0x0000ffff, 0x00000000, 0x0000ffff, 0x00000000, 0x0000ffff,
-	0x00000000, 0x00100000, 0x00000000, 0x0000ffff, 0x00000000, 0x0000ffff,
 	0x00000000, 0x0000ffff, 0x00000000, 0x0000ffff, 0x00000000, 0x0000ffff,
-	0x00000000, 0x0000ffff, 0x00000000, 0x0000ffff, 0x00000000, 0x0000ffff,
-	0x00000000, 0x00100000, 0x00000000, 0xfffffff3, 0x320fffff, 0x0c30c30c,
-	0xc30c30c3, 0xcf3cf300, 0xf3cf3cf3, 0x0000cf3c, 0xcdcdcdcd, 0xfffffff1,
-	0x30efffff, 0x0c30c30c, 0xc30c30c3, 0xcf3cf300, 0xf3cf3cf3, 0x0001cf3c,
-	0xcdcdcdcd, 0xfffffff6, 0x305fffff, 0x0c30c30c, 0xc30c30c3, 0xcf3cf300,
-	0xf3cf3cf3, 0x0002cf3c, 0xcdcdcdcd, 0xfffff406, 0x1cbfffff, 0x0c30c305,
-	0xc30c30c3, 0xcf300014, 0xf3cf3cf3, 0x0004cf3c, 0xcdcdcdcd, 0xfffffff2,
-	0x304fffff, 0x0c30c30c, 0xc30c30c3, 0xcf3cf300, 0xf3cf3cf3, 0x0008cf3c,
-	0xcdcdcdcd, 0xfffffffa, 0x302fffff, 0x0c30c30c, 0xc30c30c3, 0xcf3cf300,
-	0xf3cf3cf3, 0x0010cf3c, 0xcdcdcdcd, 0xfffffff7, 0x31efffff, 0x0c30c30c,
-	0xc30c30c3, 0xcf3cf300, 0xf3cf3cf3, 0x0020cf3c, 0xcdcdcdcd, 0xfffffff5,
-	0x302fffff, 0x0c30c30c, 0xc30c30c3, 0xcf3cf300, 0xf3cf3cf3, 0x0040cf3c,
-	0xcdcdcdcd, 0xfffffff3, 0x310fffff, 0x0c30c30c, 0xc30c30c3, 0xcf3cf300,
-	0xf3cf3cf3, 0x0000cf3c, 0xcdcdcdcd, 0xfffffff1, 0x310fffff, 0x0c30c30c,
+	0x00000000, 0x0000ffff, 0x00000000, 0x0000ffff, 0x00000000, 0x00100000,
+	0x00000000, 0xfffffff3, 0x320fffff, 0x0c30c30c, 0xc30c30c3, 0xcf3cf300,
+	0xf3cf3cf3, 0x0000cf3c, 0xcdcdcdcd, 0xfffffff1, 0x30efffff, 0x0c30c30c,
 	0xc30c30c3, 0xcf3cf300, 0xf3cf3cf3, 0x0001cf3c, 0xcdcdcdcd, 0xfffffff6,
 	0x305fffff, 0x0c30c30c, 0xc30c30c3, 0xcf3cf300, 0xf3cf3cf3, 0x0002cf3c,
 	0xcdcdcdcd, 0xfffff406, 0x1cbfffff, 0x0c30c305, 0xc30c30c3, 0xcf300014,
 	0xf3cf3cf3, 0x0004cf3c, 0xcdcdcdcd, 0xfffffff2, 0x304fffff, 0x0c30c30c,
 	0xc30c30c3, 0xcf3cf300, 0xf3cf3cf3, 0x0008cf3c, 0xcdcdcdcd, 0xfffffffa,
 	0x302fffff, 0x0c30c30c, 0xc30c30c3, 0xcf3cf300, 0xf3cf3cf3, 0x0010cf3c,
-	0xcdcdcdcd, 0xfffffff7, 0x30efffff, 0x0c30c30c, 0xc30c30c3, 0xcf3cf300,
-	0xf3cf3cf3, 0x0020cf3c, 0xcdcdcdcd, 0xfffffff5, 0x304fffff, 0x0c30c30c,
+	0xcdcdcdcd, 0xfffffff7, 0x31efffff, 0x0c30c30c, 0xc30c30c3, 0xcf3cf300,
+	0xf3cf3cf3, 0x0020cf3c, 0xcdcdcdcd, 0xfffffff5, 0x302fffff, 0x0c30c30c,
 	0xc30c30c3, 0xcf3cf300, 0xf3cf3cf3, 0x0040cf3c, 0xcdcdcdcd, 0xfffffff3,
-	0x31efffff, 0x0c30c30c, 0xc30c30c3, 0xcf3cf300, 0xf3cf3cf3, 0x0000cf3c,
+	0x310fffff, 0x0c30c30c, 0xc30c30c3, 0xcf3cf300, 0xf3cf3cf3, 0x0000cf3c,
 	0xcdcdcdcd, 0xfffffff1, 0x310fffff, 0x0c30c30c, 0xc30c30c3, 0xcf3cf300,
 	0xf3cf3cf3, 0x0001cf3c, 0xcdcdcdcd, 0xfffffff6, 0x305fffff, 0x0c30c30c,
 	0xc30c30c3, 0xcf3cf300, 0xf3cf3cf3, 0x0002cf3c, 0xcdcdcdcd, 0xfffff406,
 	0x1cbfffff, 0x0c30c305, 0xc30c30c3, 0xcf300014, 0xf3cf3cf3, 0x0004cf3c,
 	0xcdcdcdcd, 0xfffffff2, 0x304fffff, 0x0c30c30c, 0xc30c30c3, 0xcf3cf300,
 	0xf3cf3cf3, 0x0008cf3c, 0xcdcdcdcd, 0xfffffffa, 0x302fffff, 0x0c30c30c,
-	0xc30c30c3, 0xcf3cf300, 0xf3cf3cf3, 0x0010cf3c, 0xcdcdcdcd, 0xffffff97,
-	0x056fffff, 0x0c30c30c, 0xc30c30c3, 0xcf3cc000, 0xf3cf3cf3, 0x0020cf3c,
-	0xcdcdcdcd, 0xfffffff5, 0x310fffff, 0x0c30c30c, 0xc30c30c3, 0xcf3cf300,
-	0xf3cf3cf3, 0x0040cf3c, 0xcdcdcdcd, 0xfffffff3, 0x320fffff, 0x0c30c30c,
+	0xc30c30c3, 0xcf3cf300, 0xf3cf3cf3, 0x0010cf3c, 0xcdcdcdcd, 0xfffffff7,
+	0x30efffff, 0x0c30c30c, 0xc30c30c3, 0xcf3cf300, 0xf3cf3cf3, 0x0020cf3c,
+	0xcdcdcdcd, 0xfffffff5, 0x304fffff, 0x0c30c30c, 0xc30c30c3, 0xcf3cf300,
+	0xf3cf3cf3, 0x0040cf3c, 0xcdcdcdcd, 0xfffffff3, 0x31efffff, 0x0c30c30c,
 	0xc30c30c3, 0xcf3cf300, 0xf3cf3cf3, 0x0000cf3c, 0xcdcdcdcd, 0xfffffff1,
 	0x310fffff, 0x0c30c30c, 0xc30c30c3, 0xcf3cf300, 0xf3cf3cf3, 0x0001cf3c,
 	0xcdcdcdcd, 0xfffffff6, 0x305fffff, 0x0c30c30c, 0xc30c30c3, 0xcf3cf300,
 	0xf3cf3cf3, 0x0002cf3c, 0xcdcdcdcd, 0xfffff406, 0x1cbfffff, 0x0c30c305,
 	0xc30c30c3, 0xcf300014, 0xf3cf3cf3, 0x0004cf3c, 0xcdcdcdcd, 0xfffffff2,
 	0x304fffff, 0x0c30c30c, 0xc30c30c3, 0xcf3cf300, 0xf3cf3cf3, 0x0008cf3c,
-	0xcdcdcdcd, 0xffffff8a, 0x042fffff, 0x0c30c30c, 0xc30c30c3, 0xcf3cc000,
-	0xf3cf3cf3, 0x0010cf3c, 0xcdcdcdcd, 0xffffff97, 0x05cfffff, 0x0c30c30c,
+	0xcdcdcdcd, 0xfffffffa, 0x302fffff, 0x0c30c30c, 0xc30c30c3, 0xcf3cf300,
+	0xf3cf3cf3, 0x0010cf3c, 0xcdcdcdcd, 0xffffff97, 0x056fffff, 0x0c30c30c,
 	0xc30c30c3, 0xcf3cc000, 0xf3cf3cf3, 0x0020cf3c, 0xcdcdcdcd, 0xfffffff5,
 	0x310fffff, 0x0c30c30c, 0xc30c30c3, 0xcf3cf300, 0xf3cf3cf3, 0x0040cf3c,
-	0xcdcdcdcd, 0xfffffff3, 0x300fffff, 0x0c30c30c, 0xc30c30c3, 0xcf3cf300,
-	0xf3cf3cf3, 0x0000cf3c, 0xcdcdcdcd, 0xfffffff1, 0x300fffff, 0x0c30c30c,
+	0xcdcdcdcd, 0xfffffff3, 0x320fffff, 0x0c30c30c, 0xc30c30c3, 0xcf3cf300,
+	0xf3cf3cf3, 0x0000cf3c, 0xcdcdcdcd, 0xfffffff1, 0x310fffff, 0x0c30c30c,
 	0xc30c30c3, 0xcf3cf300, 0xf3cf3cf3, 0x0001cf3c, 0xcdcdcdcd, 0xfffffff6,
 	0x305fffff, 0x0c30c30c, 0xc30c30c3, 0xcf3cf300, 0xf3cf3cf3, 0x0002cf3c,
 	0xcdcdcdcd, 0xfffff406, 0x1cbfffff, 0x0c30c305, 0xc30c30c3, 0xcf300014,
 	0xf3cf3cf3, 0x0004cf3c, 0xcdcdcdcd, 0xfffffff2, 0x304fffff, 0x0c30c30c,
-	0xc30c30c3, 0xcf3cf300, 0xf3cf3cf3, 0x0008cf3c, 0xcdcdcdcd, 0xfffffffa,
-	0x302fffff, 0x0c30c30c, 0xc30c30c3, 0xcf3cf300, 0xf3cf3cf3, 0x0010cf3c,
-	0xcdcdcdcd, 0xffffff97, 0x040fffff, 0x0c30c30c, 0xc30c30c3, 0xcf3cc000,
-	0xf3cf3cf3, 0x0020cf3c, 0xcdcdcdcd, 0xfffffff5, 0x300fffff, 0x0c30c30c,
-	0xc30c30c3, 0xcf3cf300, 0xf3cf3cf3, 0x0040cf3c, 0xcdcdcdcd, 0xffffffff,
-	0x30cfffff, 0x0c30c30c, 0xc30c30c3, 0xcf3cf3cc, 0xf3cf3cf3, 0x0000cf3c,
-	0xcdcdcdcd, 0xffffffff, 0x30cfffff, 0x0c30c30c, 0xc30c30c3, 0xcf3cf3cc,
-	0xf3cf3cf3, 0x0001cf3c, 0xcdcdcdcd, 0xffffffff, 0x30cfffff, 0x0c30c30c,
-	0xc30c30c3, 0xcf3cf3cc, 0xf3cf3cf3, 0x0002cf3c, 0xcdcdcdcd, 0xffffffff,
-	0x30cfffff, 0x0c30c30c, 0xc30c30c3, 0xcf3cf3cc, 0xf3cf3cf3, 0x0004cf3c,
-	0xcdcdcdcd, 0xffffffff, 0x30cfffff, 0x0c30c30c, 0xc30c30c3, 0xcf3cf3cc,
-	0xf3cf3cf3, 0x0008cf3c, 0xcdcdcdcd, 0xffffffff, 0x30cfffff, 0x0c30c30c,
-	0xc30c30c3, 0xcf3cf3cc, 0xf3cf3cf3, 0x0010cf3c, 0xcdcdcdcd, 0xffffffff,
-	0x30cfffff, 0x0c30c30c, 0xc30c30c3, 0xcf3cf3cc, 0xf3cf3cf3, 0x0020cf3c,
-	0xcdcdcdcd, 0xffffffff, 0x30cfffff, 0x0c30c30c, 0xc30c30c3, 0xcf3cf3cc,
+	0xc30c30c3, 0xcf3cf300, 0xf3cf3cf3, 0x0008cf3c, 0xcdcdcdcd, 0xffffff8a,
+	0x042fffff, 0x0c30c30c, 0xc30c30c3, 0xcf3cc000, 0xf3cf3cf3, 0x0010cf3c,
+	0xcdcdcdcd, 0xffffff97, 0x05cfffff, 0x0c30c30c, 0xc30c30c3, 0xcf3cc000,
+	0xf3cf3cf3, 0x0020cf3c, 0xcdcdcdcd, 0xfffffff5, 0x310fffff, 0x0c30c30c,
+	0xc30c30c3, 0xcf3cf300, 0xf3cf3cf3, 0x0040cf3c, 0xcdcdcdcd, 0xfffffff3,
+	0x300fffff, 0x0c30c30c, 0xc30c30c3, 0xcf3cf300, 0xf3cf3cf3, 0x0000cf3c,
+	0xcdcdcdcd, 0xfffffff1, 0x300fffff, 0x0c30c30c, 0xc30c30c3, 0xcf3cf300,
+	0xf3cf3cf3, 0x0001cf3c, 0xcdcdcdcd, 0xfffffff6, 0x305fffff, 0x0c30c30c,
+	0xc30c30c3, 0xcf3cf300, 0xf3cf3cf3, 0x0002cf3c, 0xcdcdcdcd, 0xfffff406,
+	0x1cbfffff, 0x0c30c305, 0xc30c30c3, 0xcf300014, 0xf3cf3cf3, 0x0004cf3c,
+	0xcdcdcdcd, 0xfffffff2, 0x304fffff, 0x0c30c30c, 0xc30c30c3, 0xcf3cf300,
+	0xf3cf3cf3, 0x0008cf3c, 0xcdcdcdcd, 0xfffffffa, 0x302fffff, 0x0c30c30c,
+	0xc30c30c3, 0xcf3cf300, 0xf3cf3cf3, 0x0010cf3c, 0xcdcdcdcd, 0xffffff97,
+	0x040fffff, 0x0c30c30c, 0xc30c30c3, 0xcf3cc000, 0xf3cf3cf3, 0x0020cf3c,
+	0xcdcdcdcd, 0xfffffff5, 0x300fffff, 0x0c30c30c, 0xc30c30c3, 0xcf3cf300,
 	0xf3cf3cf3, 0x0040cf3c, 0xcdcdcdcd, 0xffffffff, 0x30cfffff, 0x0c30c30c,
 	0xc30c30c3, 0xcf3cf3cc, 0xf3cf3cf3, 0x0000cf3c, 0xcdcdcdcd, 0xffffffff,
 	0x30cfffff, 0x0c30c30c, 0xc30c30c3, 0xcf3cf3cc, 0xf3cf3cf3, 0x0001cf3c,
@@ -2678,16 +2630,27 @@ static const u32 init_data_e1[] = {
 	0x30cfffff, 0x0c30c30c, 0xc30c30c3, 0xcf3cf3cc, 0xf3cf3cf3, 0x0010cf3c,
 	0xcdcdcdcd, 0xffffffff, 0x30cfffff, 0x0c30c30c, 0xc30c30c3, 0xcf3cf3cc,
 	0xf3cf3cf3, 0x0020cf3c, 0xcdcdcdcd, 0xffffffff, 0x30cfffff, 0x0c30c30c,
-	0xc30c30c3, 0xcf3cf3cc, 0xf3cf3cf3, 0x0040cf3c, 0xcdcdcdcd, 0x00100000,
-	0x00070100, 0x00028170, 0x000b8198, 0x00020250, 0x00010270, 0x000f0280,
-	0x00010370, 0x00080000, 0x00080080, 0x00028100, 0x000b8128, 0x000201e0,
-	0x00010200, 0x00070210, 0x00020280, 0x000f0000, 0x000800f0, 0x00028170,
-	0x000b8198, 0x00020250, 0x00010270, 0x000b8280, 0x00080338, 0x00100000,
-	0x00080100, 0x00028180, 0x000b81a8, 0x00020260, 0x00018280, 0x000e8298,
-	0x00080380, 0x00028000, 0x000b8028, 0x000200e0, 0x00010100, 0x00008110,
-	0x00000118, 0xcccccccc, 0xcccccccc, 0xcccccccc, 0xcccccccc, 0x00002000,
-	0xcccccccc, 0xcccccccc, 0xcccccccc, 0xcccccccc, 0x00002000, 0xcccccccc,
-	0xcccccccc, 0xcccccccc, 0xcccccccc, 0x00002000
+	0xc30c30c3, 0xcf3cf3cc, 0xf3cf3cf3, 0x0040cf3c, 0xcdcdcdcd, 0xffffffff,
+	0x30cfffff, 0x0c30c30c, 0xc30c30c3, 0xcf3cf3cc, 0xf3cf3cf3, 0x0000cf3c,
+	0xcdcdcdcd, 0xffffffff, 0x30cfffff, 0x0c30c30c, 0xc30c30c3, 0xcf3cf3cc,
+	0xf3cf3cf3, 0x0001cf3c, 0xcdcdcdcd, 0xffffffff, 0x30cfffff, 0x0c30c30c,
+	0xc30c30c3, 0xcf3cf3cc, 0xf3cf3cf3, 0x0002cf3c, 0xcdcdcdcd, 0xffffffff,
+	0x30cfffff, 0x0c30c30c, 0xc30c30c3, 0xcf3cf3cc, 0xf3cf3cf3, 0x0004cf3c,
+	0xcdcdcdcd, 0xffffffff, 0x30cfffff, 0x0c30c30c, 0xc30c30c3, 0xcf3cf3cc,
+	0xf3cf3cf3, 0x0008cf3c, 0xcdcdcdcd, 0xffffffff, 0x30cfffff, 0x0c30c30c,
+	0xc30c30c3, 0xcf3cf3cc, 0xf3cf3cf3, 0x0010cf3c, 0xcdcdcdcd, 0xffffffff,
+	0x30cfffff, 0x0c30c30c, 0xc30c30c3, 0xcf3cf3cc, 0xf3cf3cf3, 0x0020cf3c,
+	0xcdcdcdcd, 0xffffffff, 0x30cfffff, 0x0c30c30c, 0xc30c30c3, 0xcf3cf3cc,
+	0xf3cf3cf3, 0x0040cf3c, 0xcdcdcdcd, 0x00100000, 0x00070100, 0x00028170,
+	0x000b8198, 0x00020250, 0x00010270, 0x000f0280, 0x00010370, 0x00080000,
+	0x00080080, 0x00028100, 0x000b8128, 0x000201e0, 0x00010200, 0x00070210,
+	0x00020280, 0x000f0000, 0x000800f0, 0x00028170, 0x000b8198, 0x00020250,
+	0x00010270, 0x000b8280, 0x00080338, 0x00100000, 0x00080100, 0x00028180,
+	0x000b81a8, 0x00020260, 0x00018280, 0x000e8298, 0x00080380, 0x00028000,
+	0x000b8028, 0x000200e0, 0x00010100, 0x00008110, 0x00000118, 0xcccccccc,
+	0xcccccccc, 0xcccccccc, 0xcccccccc, 0x00002000, 0xcccccccc, 0xcccccccc,
+	0xcccccccc, 0xcccccccc, 0x00002000, 0xcccccccc, 0xcccccccc, 0xcccccccc,
+	0xcccccccc, 0x00002000
 };
 
 static const u32 init_data_e1h[] = {
diff --git a/drivers/net/bnx2x_link.c b/drivers/net/bnx2x_link.c
index ff2743db10d9..4ce7fe9c5251 100644
--- a/drivers/net/bnx2x_link.c
+++ b/drivers/net/bnx2x_link.c
@@ -21,7 +21,6 @@
 #include <linux/delay.h>
 #include <linux/ethtool.h>
 #include <linux/mutex.h>
-#include <linux/version.h>
 
 #include "bnx2x_reg.h"
 #include "bnx2x_fw_defs.h"
@@ -31,17 +30,16 @@
 
 /********************************************************/
 #define SUPPORT_CL73 0 /* Currently no */
-#define ETH_HLEN 			14
+#define ETH_HLEN			14
 #define ETH_OVREHEAD		(ETH_HLEN + 8)/* 8 for CRC + VLAN*/
 #define ETH_MIN_PACKET_SIZE		60
 #define ETH_MAX_PACKET_SIZE		1500
 #define ETH_MAX_JUMBO_PACKET_SIZE	9600
 #define MDIO_ACCESS_TIMEOUT		1000
 #define BMAC_CONTROL_RX_ENABLE	2
-#define MAX_MTU_SIZE		5000
 
 /***********************************************************/
-/*                       Shortcut definitions              */
+/*			Shortcut definitions		   */
 /***********************************************************/
 
 #define NIG_STATUS_XGXS0_LINK10G \
@@ -80,12 +78,12 @@
 
 #define AUTONEG_CL37		SHARED_HW_CFG_AN_ENABLE_CL37
 #define AUTONEG_CL73		SHARED_HW_CFG_AN_ENABLE_CL73
-#define AUTONEG_BAM			SHARED_HW_CFG_AN_ENABLE_BAM
-#define AUTONEG_PARALLEL		\
+#define AUTONEG_BAM 		SHARED_HW_CFG_AN_ENABLE_BAM
+#define AUTONEG_PARALLEL \
 				SHARED_HW_CFG_AN_ENABLE_PARALLEL_DETECTION
-#define AUTONEG_SGMII_FIBER_AUTODET	\
+#define AUTONEG_SGMII_FIBER_AUTODET \
 				SHARED_HW_CFG_AN_EN_SGMII_FIBER_AUTO_DETECT
-#define AUTONEG_REMOTE_PHY		SHARED_HW_CFG_AN_ENABLE_REMOTE_PHY
+#define AUTONEG_REMOTE_PHY	SHARED_HW_CFG_AN_ENABLE_REMOTE_PHY
 
 #define GP_STATUS_PAUSE_RSOLUTION_TXSIDE \
 			MDIO_GP_STATUS_TOP_AN_STATUS1_PAUSE_RSOLUTION_TXSIDE
@@ -202,11 +200,10 @@ static void bnx2x_emac_init(struct link_params *params,
 	/* init emac - use read-modify-write */
 	/* self clear reset */
 	val = REG_RD(bp, emac_base + EMAC_REG_EMAC_MODE);
-	EMAC_WR(EMAC_REG_EMAC_MODE, (val | EMAC_MODE_RESET));
+	EMAC_WR(bp, EMAC_REG_EMAC_MODE, (val | EMAC_MODE_RESET));
 
 	timeout = 200;
-	do
-	{
+	do {
 		val = REG_RD(bp, emac_base + EMAC_REG_EMAC_MODE);
 		DP(NETIF_MSG_LINK, "EMAC reset reg is %u\n", val);
 		if (!timeout) {
@@ -214,18 +211,18 @@ static void bnx2x_emac_init(struct link_params *params,
 			return;
 		}
 		timeout--;
-	}while (val & EMAC_MODE_RESET);
+	} while (val & EMAC_MODE_RESET);
 
 	/* Set mac address */
 	val = ((params->mac_addr[0] << 8) |
 		params->mac_addr[1]);
-	EMAC_WR(EMAC_REG_EMAC_MAC_MATCH, val);
+	EMAC_WR(bp, EMAC_REG_EMAC_MAC_MATCH, val);
 
 	val = ((params->mac_addr[2] << 24) |
 	       (params->mac_addr[3] << 16) |
 	       (params->mac_addr[4] << 8) |
 		params->mac_addr[5]);
-	EMAC_WR(EMAC_REG_EMAC_MAC_MATCH + 4, val);
+	EMAC_WR(bp, EMAC_REG_EMAC_MAC_MATCH + 4, val);
 }
 
 static u8 bnx2x_emac_enable(struct link_params *params,
@@ -286,7 +283,7 @@ static u8 bnx2x_emac_enable(struct link_params *params,
 	if (CHIP_REV_IS_SLOW(bp)) {
 		/* config GMII mode */
 		val = REG_RD(bp, emac_base + EMAC_REG_EMAC_MODE);
-		EMAC_WR(EMAC_REG_EMAC_MODE,
+		EMAC_WR(bp, EMAC_REG_EMAC_MODE,
 			    (val | EMAC_MODE_PORT_GMII));
 	} else { /* ASIC */
 		/* pause enable/disable */
@@ -298,17 +295,19 @@ static u8 bnx2x_emac_enable(struct link_params *params,
 				    EMAC_RX_MODE_FLOW_EN);
 
 		bnx2x_bits_dis(bp,  emac_base + EMAC_REG_EMAC_TX_MODE,
-			       EMAC_TX_MODE_EXT_PAUSE_EN);
+			     (EMAC_TX_MODE_EXT_PAUSE_EN |
+			      EMAC_TX_MODE_FLOW_EN));
 		if (vars->flow_ctrl & FLOW_CTRL_TX)
 			bnx2x_bits_en(bp, emac_base +
 				    EMAC_REG_EMAC_TX_MODE,
-				      EMAC_TX_MODE_EXT_PAUSE_EN);
+				   (EMAC_TX_MODE_EXT_PAUSE_EN |
+				    EMAC_TX_MODE_FLOW_EN));
 	}
 
 	/* KEEP_VLAN_TAG, promiscuous */
 	val = REG_RD(bp, emac_base + EMAC_REG_EMAC_RX_MODE);
 	val |= EMAC_RX_MODE_KEEP_VLAN_TAG | EMAC_RX_MODE_PROMISCUOUS;
-	EMAC_WR(EMAC_REG_EMAC_RX_MODE, val);
+	EMAC_WR(bp, EMAC_REG_EMAC_RX_MODE, val);
 
 	/* Set Loopback */
 	val = REG_RD(bp, emac_base + EMAC_REG_EMAC_MODE);
@@ -316,10 +315,10 @@ static u8 bnx2x_emac_enable(struct link_params *params,
 		val |= 0x810;
 	else
 		val &= ~0x810;
-	EMAC_WR(EMAC_REG_EMAC_MODE, val);
+	EMAC_WR(bp, EMAC_REG_EMAC_MODE, val);
 
 	/* enable emac for jumbo packets */
-	EMAC_WR(EMAC_REG_EMAC_RX_MTU_SIZE,
+	EMAC_WR(bp, EMAC_REG_EMAC_RX_MTU_SIZE,
 		(EMAC_RX_MTU_SIZE_JUMBO_ENA |
 		 (ETH_MAX_JUMBO_PACKET_SIZE + ETH_OVREHEAD)));
 
@@ -591,9 +590,9 @@ void bnx2x_link_status_update(struct link_params *params,
 			vars->flow_ctrl &= ~FLOW_CTRL_RX;
 
 		if (vars->phy_flags & PHY_XGXS_FLAG) {
-			if (params->req_line_speed &&
-			    ((params->req_line_speed == SPEED_10) ||
-			     (params->req_line_speed == SPEED_100))) {
+			if (vars->line_speed &&
+			    ((vars->line_speed == SPEED_10) ||
+			     (vars->line_speed == SPEED_100))) {
 				vars->phy_flags |= PHY_SGMII_FLAG;
 			} else {
 				vars->phy_flags &= ~PHY_SGMII_FLAG;
@@ -645,7 +644,7 @@ static void bnx2x_bmac_rx_disable(struct bnx2x *bp, u8 port)
 	u32 bmac_addr = port ? NIG_REG_INGRESS_BMAC1_MEM :
 		NIG_REG_INGRESS_BMAC0_MEM;
 	u32 wb_data[2];
-    u32 nig_bmac_enable = REG_RD(bp, NIG_REG_BMAC0_REGS_OUT_EN + port*4);
+	u32 nig_bmac_enable = REG_RD(bp, NIG_REG_BMAC0_REGS_OUT_EN + port*4);
 
 	/* Only if the bmac is out of reset */
 	if (REG_RD(bp, MISC_REG_RESET_REG_2) &
@@ -670,7 +669,6 @@ static u8 bnx2x_pbf_update(struct link_params *params, u32 flow_ctrl,
 	u8 port = params->port;
 	u32 init_crd, crd;
 	u32 count = 1000;
-	u32 pause = 0;
 
 	/* disable port */
 	REG_WR(bp, PBF_REG_DISABLE_NEW_TASK_PROC_P0 + port*4, 0x1);
@@ -693,33 +691,25 @@ static u8 bnx2x_pbf_update(struct link_params *params, u32 flow_ctrl,
 		return -EINVAL;
 	}
 
-	if (flow_ctrl & FLOW_CTRL_RX)
-		pause = 1;
-	REG_WR(bp, PBF_REG_P0_PAUSE_ENABLE + port*4, pause);
-	if (pause) {
+	if (flow_ctrl & FLOW_CTRL_RX ||
+	    line_speed == SPEED_10 ||
+	    line_speed == SPEED_100 ||
+	    line_speed == SPEED_1000 ||
+	    line_speed == SPEED_2500) {
+		REG_WR(bp, PBF_REG_P0_PAUSE_ENABLE + port*4, 1);
 		/* update threshold */
 		REG_WR(bp, PBF_REG_P0_ARB_THRSH + port*4, 0);
 		/* update init credit */
-		init_crd = 778;		/* (800-18-4) */
+		init_crd = 778; 	/* (800-18-4) */
 
 	} else {
 		u32 thresh = (ETH_MAX_JUMBO_PACKET_SIZE +
 			      ETH_OVREHEAD)/16;
-
+		REG_WR(bp, PBF_REG_P0_PAUSE_ENABLE + port*4, 0);
 		/* update threshold */
 		REG_WR(bp, PBF_REG_P0_ARB_THRSH + port*4, thresh);
 		/* update init credit */
 		switch (line_speed) {
-		case SPEED_10:
-		case SPEED_100:
-		case SPEED_1000:
-			init_crd = thresh + 55 - 22;
-			break;
-
-		case SPEED_2500:
-			init_crd = thresh + 138 - 22;
-			break;
-
 		case SPEED_10000:
 			init_crd = thresh + 553 - 22;
 			break;
@@ -764,10 +754,10 @@ static u32 bnx2x_get_emac_base(u32 ext_phy_type, u8 port)
 		emac_base = GRCBASE_EMAC0;
 		break;
 	case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8073:
-		emac_base = (port) ? GRCBASE_EMAC0: GRCBASE_EMAC1;
+		emac_base = (port) ? GRCBASE_EMAC0 : GRCBASE_EMAC1;
 		break;
 	default:
-		emac_base = (port) ? GRCBASE_EMAC1: GRCBASE_EMAC0;
+		emac_base = (port) ? GRCBASE_EMAC1 : GRCBASE_EMAC0;
 		break;
 	}
 	return emac_base;
@@ -1044,7 +1034,7 @@ static void bnx2x_set_swap_lanes(struct link_params *params)
 }
 
 static void bnx2x_set_parallel_detection(struct link_params *params,
-				       u8                phy_flags)
+				       u8       	 phy_flags)
 {
 	struct bnx2x *bp = params->bp;
 	u16 control2;
@@ -1114,7 +1104,7 @@ static void bnx2x_set_autoneg(struct link_params *params,
 			      MDIO_COMBO_IEEE0_MII_CONTROL, &reg_val);
 
 	/* CL37 Autoneg Enabled */
-	if (params->req_line_speed == SPEED_AUTO_NEG)
+	if (vars->line_speed == SPEED_AUTO_NEG)
 		reg_val |= MDIO_COMBO_IEEO_MII_CONTROL_AN_EN;
 	else /* CL37 Autoneg Disabled */
 		reg_val &= ~(MDIO_COMBO_IEEO_MII_CONTROL_AN_EN |
@@ -1132,7 +1122,7 @@ static void bnx2x_set_autoneg(struct link_params *params,
 			      MDIO_REG_BANK_SERDES_DIGITAL,
 			      MDIO_SERDES_DIGITAL_A_1000X_CONTROL1, &reg_val);
 	reg_val &= ~MDIO_SERDES_DIGITAL_A_1000X_CONTROL1_SIGNAL_DETECT_EN;
-	if (params->req_line_speed == SPEED_AUTO_NEG)
+	if (vars->line_speed == SPEED_AUTO_NEG)
 		reg_val |= MDIO_SERDES_DIGITAL_A_1000X_CONTROL1_AUTODET;
 	else
 		reg_val &= ~MDIO_SERDES_DIGITAL_A_1000X_CONTROL1_AUTODET;
@@ -1148,7 +1138,7 @@ static void bnx2x_set_autoneg(struct link_params *params,
 			      MDIO_REG_BANK_BAM_NEXT_PAGE,
 			      MDIO_BAM_NEXT_PAGE_MP5_NEXT_PAGE_CTRL,
 			  &reg_val);
-	if (params->req_line_speed == SPEED_AUTO_NEG) {
+	if (vars->line_speed == SPEED_AUTO_NEG) {
 		/* Enable BAM aneg Mode and TetonII aneg Mode */
 		reg_val |= (MDIO_BAM_NEXT_PAGE_MP5_NEXT_PAGE_CTRL_BAM_MODE |
 			    MDIO_BAM_NEXT_PAGE_MP5_NEXT_PAGE_CTRL_TETON_AN);
@@ -1164,7 +1154,7 @@ static void bnx2x_set_autoneg(struct link_params *params,
 			      reg_val);
 
 	/* Enable Clause 73 Aneg */
-	if ((params->req_line_speed == SPEED_AUTO_NEG) &&
+	if ((vars->line_speed == SPEED_AUTO_NEG) &&
 	    (SUPPORT_CL73)) {
 		/* Enable BAM Station Manager */
 
@@ -1226,7 +1216,8 @@ static void bnx2x_set_autoneg(struct link_params *params,
 }
 
 /* program SerDes, forced speed */
-static void bnx2x_program_serdes(struct link_params *params)
+static void bnx2x_program_serdes(struct link_params *params,
+			       struct link_vars *vars)
 {
 	struct bnx2x *bp = params->bp;
 	u16 reg_val;
@@ -1248,28 +1239,35 @@ static void bnx2x_program_serdes(struct link_params *params)
 
 	/* program speed
 	   - needed only if the speed is greater than 1G (2.5G or 10G) */
-	if (!((params->req_line_speed == SPEED_1000) ||
-	      (params->req_line_speed == SPEED_100) ||
-	      (params->req_line_speed == SPEED_10))) {
-		CL45_RD_OVER_CL22(bp, params->port,
+	CL45_RD_OVER_CL22(bp, params->port,
 				      params->phy_addr,
 				      MDIO_REG_BANK_SERDES_DIGITAL,
 				      MDIO_SERDES_DIGITAL_MISC1, &reg_val);
-		/* clearing the speed value before setting the right speed */
-		reg_val &= ~MDIO_SERDES_DIGITAL_MISC1_FORCE_SPEED_MASK;
+	/* clearing the speed value before setting the right speed */
+	DP(NETIF_MSG_LINK, "MDIO_REG_BANK_SERDES_DIGITAL = 0x%x\n", reg_val);
+
+	reg_val &= ~(MDIO_SERDES_DIGITAL_MISC1_FORCE_SPEED_MASK |
+		     MDIO_SERDES_DIGITAL_MISC1_FORCE_SPEED_SEL);
+
+	if (!((vars->line_speed == SPEED_1000) ||
+	      (vars->line_speed == SPEED_100) ||
+	      (vars->line_speed == SPEED_10))) {
+
 		reg_val |= (MDIO_SERDES_DIGITAL_MISC1_REFCLK_SEL_156_25M |
 			    MDIO_SERDES_DIGITAL_MISC1_FORCE_SPEED_SEL);
-		if (params->req_line_speed == SPEED_10000)
+		if (vars->line_speed == SPEED_10000)
 			reg_val |=
 				MDIO_SERDES_DIGITAL_MISC1_FORCE_SPEED_10G_CX4;
-		if (params->req_line_speed == SPEED_13000)
+		if (vars->line_speed == SPEED_13000)
 			reg_val |=
 				MDIO_SERDES_DIGITAL_MISC1_FORCE_SPEED_13G;
-		CL45_WR_OVER_CL22(bp, params->port,
+	}
+
+	CL45_WR_OVER_CL22(bp, params->port,
 				      params->phy_addr,
 				      MDIO_REG_BANK_SERDES_DIGITAL,
 				      MDIO_SERDES_DIGITAL_MISC1, reg_val);
-	}
+
 }
 
 static void bnx2x_set_brcm_cl37_advertisment(struct link_params *params)
@@ -1295,48 +1293,49 @@ static void bnx2x_set_brcm_cl37_advertisment(struct link_params *params)
 			      MDIO_OVER_1G_UP3, 0);
 }
 
-static void bnx2x_set_ieee_aneg_advertisment(struct link_params *params,
-					   u32 *ieee_fc)
+static void bnx2x_calc_ieee_aneg_adv(struct link_params *params, u32 *ieee_fc)
 {
-	struct bnx2x *bp = params->bp;
-	/* for AN, we are always publishing full duplex */
-	u16 an_adv = MDIO_COMBO_IEEE0_AUTO_NEG_ADV_FULL_DUPLEX;
-
+	*ieee_fc = MDIO_COMBO_IEEE0_AUTO_NEG_ADV_FULL_DUPLEX;
 	/* resolve pause mode and advertisement
 	 * Please refer to Table 28B-3 of the 802.3ab-1999 spec */
 
 	switch (params->req_flow_ctrl) {
 	case FLOW_CTRL_AUTO:
-		if (params->mtu <= MAX_MTU_SIZE) {
-			an_adv |=
+		if (params->req_fc_auto_adv == FLOW_CTRL_BOTH) {
+			*ieee_fc |=
 			     MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_BOTH;
 		} else {
-			an_adv |=
+			*ieee_fc |=
 		       MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_ASYMMETRIC;
 		}
 		break;
 	case FLOW_CTRL_TX:
-		an_adv |=
+		*ieee_fc |=
 		       MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_ASYMMETRIC;
 		break;
 
 	case FLOW_CTRL_RX:
 	case FLOW_CTRL_BOTH:
-		an_adv |= MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_BOTH;
+		*ieee_fc |= MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_BOTH;
 		break;
 
 	case FLOW_CTRL_NONE:
 	default:
-		an_adv |= MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_NONE;
+		*ieee_fc |= MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_NONE;
 		break;
 	}
+}
 
-	*ieee_fc = an_adv;
+static void bnx2x_set_ieee_aneg_advertisment(struct link_params *params,
+					   u32 ieee_fc)
+{
+	struct bnx2x *bp = params->bp;
+	/* for AN, we are always publishing full duplex */
 
 	CL45_WR_OVER_CL22(bp, params->port,
 			      params->phy_addr,
 			      MDIO_REG_BANK_COMBO_IEEE0,
-			      MDIO_COMBO_IEEE0_AUTO_NEG_ADV, an_adv);
+			      MDIO_COMBO_IEEE0_AUTO_NEG_ADV, (u16)ieee_fc);
 }
 
 static void bnx2x_restart_autoneg(struct link_params *params)
@@ -1382,7 +1381,8 @@ static void bnx2x_restart_autoneg(struct link_params *params)
 	}
 }
 
-static void bnx2x_initialize_sgmii_process(struct link_params *params)
+static void bnx2x_initialize_sgmii_process(struct link_params *params,
+					 struct link_vars *vars)
 {
 	struct bnx2x *bp = params->bp;
 	u16 control1;
@@ -1406,7 +1406,7 @@ static void bnx2x_initialize_sgmii_process(struct link_params *params)
 			      control1);
 
 	/* if forced speed */
-	if (!(params->req_line_speed == SPEED_AUTO_NEG)) {
+	if (!(vars->line_speed == SPEED_AUTO_NEG)) {
 		/* set speed, disable autoneg */
 		u16 mii_control;
 
@@ -1419,7 +1419,7 @@ static void bnx2x_initialize_sgmii_process(struct link_params *params)
 				 MDIO_COMBO_IEEO_MII_CONTROL_MAN_SGMII_SP_MASK|
 				 MDIO_COMBO_IEEO_MII_CONTROL_FULL_DUPLEX);
 
-		switch (params->req_line_speed) {
+		switch (vars->line_speed) {
 		case SPEED_100:
 			mii_control |=
 				MDIO_COMBO_IEEO_MII_CONTROL_MAN_SGMII_SP_100;
@@ -1433,8 +1433,8 @@ static void bnx2x_initialize_sgmii_process(struct link_params *params)
 			break;
 		default:
 			/* invalid speed for SGMII */
-			DP(NETIF_MSG_LINK, "Invalid req_line_speed 0x%x\n",
-				  params->req_line_speed);
+			DP(NETIF_MSG_LINK, "Invalid line_speed 0x%x\n",
+				  vars->line_speed);
 			break;
 		}
 
@@ -1460,20 +1460,20 @@ static void bnx2x_initialize_sgmii_process(struct link_params *params)
  */
 
 static void bnx2x_pause_resolve(struct link_vars *vars, u32 pause_result)
-{
-	switch (pause_result) {			/* ASYM P ASYM P */
-	case 0xb:				/*   1  0   1  1 */
+{						/*  LD	    LP	 */
+	switch (pause_result) { 		/* ASYM P ASYM P */
+	case 0xb:       			/*   1  0   1  1 */
 		vars->flow_ctrl = FLOW_CTRL_TX;
 		break;
 
-	case 0xe:				/*   1  1   1  0 */
+	case 0xe:       			/*   1  1   1  0 */
 		vars->flow_ctrl = FLOW_CTRL_RX;
 		break;
 
-	case 0x5:				/*   0  1   0  1 */
-	case 0x7:				/*   0  1   1  1 */
-	case 0xd:				/*   1  1   0  1 */
-	case 0xf:				/*   1  1   1  1 */
+	case 0x5:       			/*   0  1   0  1 */
+	case 0x7:       			/*   0  1   1  1 */
+	case 0xd:       			/*   1  1   0  1 */
+	case 0xf:       			/*   1  1   1  1 */
 		vars->flow_ctrl = FLOW_CTRL_BOTH;
 		break;
 
@@ -1531,6 +1531,28 @@ static u8 bnx2x_ext_phy_resove_fc(struct link_params *params,
 		DP(NETIF_MSG_LINK, "Ext PHY pause result 0x%x \n",
 		   pause_result);
 		bnx2x_pause_resolve(vars, pause_result);
+		if (vars->flow_ctrl == FLOW_CTRL_NONE &&
+		     ext_phy_type == PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8073) {
+			bnx2x_cl45_read(bp, port,
+				      ext_phy_type,
+				      ext_phy_addr,
+				      MDIO_AN_DEVAD,
+				      MDIO_AN_REG_CL37_FC_LD, &ld_pause);
+
+			bnx2x_cl45_read(bp, port,
+				      ext_phy_type,
+				      ext_phy_addr,
+				      MDIO_AN_DEVAD,
+				      MDIO_AN_REG_CL37_FC_LP, &lp_pause);
+			pause_result = (ld_pause &
+				MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_BOTH) >> 5;
+			pause_result |= (lp_pause &
+				MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_BOTH) >> 7;
+
+			bnx2x_pause_resolve(vars, pause_result);
+			DP(NETIF_MSG_LINK, "Ext PHY CL37 pause result 0x%x \n",
+				 pause_result);
+		}
 	}
 	return ret;
 }
@@ -1541,8 +1563,8 @@ static void bnx2x_flow_ctrl_resolve(struct link_params *params,
 				  u32 gp_status)
 {
 	struct bnx2x *bp = params->bp;
-	u16 ld_pause;	/* local driver */
-	u16 lp_pause;	/* link partner */
+	u16 ld_pause;   /* local driver */
+	u16 lp_pause;   /* link partner */
 	u16 pause_result;
 
 	vars->flow_ctrl = FLOW_CTRL_NONE;
@@ -1573,13 +1595,10 @@ static void bnx2x_flow_ctrl_resolve(struct link_params *params,
 		   (bnx2x_ext_phy_resove_fc(params, vars))) {
 		return;
 	} else {
-		vars->flow_ctrl = params->req_flow_ctrl;
-		if (vars->flow_ctrl == FLOW_CTRL_AUTO) {
-			if (params->mtu <= MAX_MTU_SIZE)
-				vars->flow_ctrl = FLOW_CTRL_BOTH;
-			else
-				vars->flow_ctrl = FLOW_CTRL_TX;
-		}
+		if (params->req_flow_ctrl == FLOW_CTRL_AUTO)
+			vars->flow_ctrl = params->req_fc_auto_adv;
+		else
+			vars->flow_ctrl = params->req_flow_ctrl;
 	}
 	DP(NETIF_MSG_LINK, "flow_ctrl 0x%x\n", vars->flow_ctrl);
 }
@@ -1590,6 +1609,7 @@ static u8 bnx2x_link_settings_status(struct link_params *params,
 				      u32 gp_status)
 {
 	struct bnx2x *bp = params->bp;
+
 	u8 rc = 0;
 	vars->link_status = 0;
 
@@ -1690,7 +1710,11 @@ static u8 bnx2x_link_settings_status(struct link_params *params,
 
 		vars->link_status |= LINK_STATUS_SERDES_LINK;
 
-		if (params->req_line_speed == SPEED_AUTO_NEG) {
+		if ((params->req_line_speed == SPEED_AUTO_NEG) &&
+		    ((XGXS_EXT_PHY_TYPE(params->ext_phy_config) ==
+		     PORT_HW_CFG_XGXS_EXT_PHY_TYPE_DIRECT) ||
+		    (XGXS_EXT_PHY_TYPE(params->ext_phy_config) ==
+		     PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8705))) {
 			vars->autoneg = AUTO_NEG_ENABLED;
 
 			if (gp_status & MDIO_AN_CL73_OR_37_COMPLETE) {
@@ -1705,18 +1729,18 @@ static u8 bnx2x_link_settings_status(struct link_params *params,
 
 		}
 		if (vars->flow_ctrl & FLOW_CTRL_TX)
-		       vars->link_status |=
-			LINK_STATUS_TX_FLOW_CONTROL_ENABLED;
+			vars->link_status |=
+				LINK_STATUS_TX_FLOW_CONTROL_ENABLED;
 
 		if (vars->flow_ctrl & FLOW_CTRL_RX)
-		       vars->link_status |=
-			LINK_STATUS_RX_FLOW_CONTROL_ENABLED;
+			vars->link_status |=
+				LINK_STATUS_RX_FLOW_CONTROL_ENABLED;
 
 	} else { /* link_down */
 		DP(NETIF_MSG_LINK, "phy link down\n");
 
 		vars->phy_link_up = 0;
-		vars->line_speed = 0;
+
 		vars->duplex = DUPLEX_FULL;
 		vars->flow_ctrl = FLOW_CTRL_NONE;
 		vars->autoneg = AUTO_NEG_DISABLED;
@@ -1817,15 +1841,15 @@ static u8 bnx2x_emac_program(struct link_params *params,
 }
 
 /*****************************************************************************/
-/*                           External Phy section                            */
+/*      		     External Phy section       		     */
 /*****************************************************************************/
-static void bnx2x_hw_reset(struct bnx2x *bp)
+static void bnx2x_hw_reset(struct bnx2x *bp, u8 port)
 {
 	bnx2x_set_gpio(bp, MISC_REGISTERS_GPIO_1,
-		       MISC_REGISTERS_GPIO_OUTPUT_LOW);
+		       MISC_REGISTERS_GPIO_OUTPUT_LOW, port);
 	msleep(1);
 	bnx2x_set_gpio(bp, MISC_REGISTERS_GPIO_1,
-		      MISC_REGISTERS_GPIO_OUTPUT_HIGH);
+		      MISC_REGISTERS_GPIO_OUTPUT_HIGH, port);
 }
 
 static void bnx2x_ext_phy_reset(struct link_params *params,
@@ -1854,10 +1878,11 @@ static void bnx2x_ext_phy_reset(struct link_params *params,
 
 			/* Restore normal power mode*/
 			bnx2x_set_gpio(bp, MISC_REGISTERS_GPIO_2,
-				      MISC_REGISTERS_GPIO_OUTPUT_HIGH);
+				      MISC_REGISTERS_GPIO_OUTPUT_HIGH,
+					  params->port);
 
 			/* HW reset */
-			bnx2x_hw_reset(bp);
+			bnx2x_hw_reset(bp, params->port);
 
 			bnx2x_cl45_write(bp, params->port,
 				       ext_phy_type,
@@ -1869,7 +1894,8 @@ static void bnx2x_ext_phy_reset(struct link_params *params,
 			/* Unset Low Power Mode and SW reset */
 			/* Restore normal power mode*/
 			bnx2x_set_gpio(bp, MISC_REGISTERS_GPIO_2,
-				      MISC_REGISTERS_GPIO_OUTPUT_HIGH);
+				      MISC_REGISTERS_GPIO_OUTPUT_HIGH,
+					  params->port);
 
 			DP(NETIF_MSG_LINK, "XGXS 8072\n");
 			bnx2x_cl45_write(bp, params->port,
@@ -1887,19 +1913,14 @@ static void bnx2x_ext_phy_reset(struct link_params *params,
 
 			/* Restore normal power mode*/
 			bnx2x_set_gpio(bp, MISC_REGISTERS_GPIO_2,
-				      MISC_REGISTERS_GPIO_OUTPUT_HIGH);
+				      MISC_REGISTERS_GPIO_OUTPUT_HIGH,
+					  params->port);
 
 			bnx2x_set_gpio(bp, MISC_REGISTERS_GPIO_1,
-				      MISC_REGISTERS_GPIO_OUTPUT_HIGH);
+				      MISC_REGISTERS_GPIO_OUTPUT_HIGH,
+					  params->port);
 
 			DP(NETIF_MSG_LINK, "XGXS 8073\n");
-			bnx2x_cl45_write(bp,
-				       params->port,
-				       ext_phy_type,
-				       ext_phy_addr,
-				       MDIO_PMA_DEVAD,
-				       MDIO_PMA_REG_CTRL,
-				       1<<15);
 			}
 			break;
 
@@ -1908,10 +1929,11 @@ static void bnx2x_ext_phy_reset(struct link_params *params,
 
 			/* Restore normal power mode*/
 			bnx2x_set_gpio(bp, MISC_REGISTERS_GPIO_2,
-				      MISC_REGISTERS_GPIO_OUTPUT_HIGH);
+				      MISC_REGISTERS_GPIO_OUTPUT_HIGH,
+					  params->port);
 
 			/* HW reset */
-			bnx2x_hw_reset(bp);
+			bnx2x_hw_reset(bp, params->port);
 
 			break;
 
@@ -1934,7 +1956,7 @@ static void bnx2x_ext_phy_reset(struct link_params *params,
 
 		case PORT_HW_CFG_SERDES_EXT_PHY_TYPE_BCM5482:
 			DP(NETIF_MSG_LINK, "SerDes 5482\n");
-			bnx2x_hw_reset(bp);
+			bnx2x_hw_reset(bp, params->port);
 			break;
 
 		default:
@@ -2098,42 +2120,45 @@ static u8 bnx2x_bcm8073_xaui_wa(struct link_params *params)
 
 }
 
-static void bnx2x_bcm8073_external_rom_boot(struct link_params *params)
+static void bnx2x_bcm8073_external_rom_boot(struct bnx2x *bp, u8 port,
+					  u8 ext_phy_addr)
 {
-	struct bnx2x *bp = params->bp;
-	u8 port = params->port;
-	u8 ext_phy_addr = ((params->ext_phy_config &
-			     PORT_HW_CFG_XGXS_EXT_PHY_ADDR_MASK) >>
-			    PORT_HW_CFG_XGXS_EXT_PHY_ADDR_SHIFT);
-	u32 ext_phy_type = XGXS_EXT_PHY_TYPE(params->ext_phy_config);
-	u16 fw_ver1, fw_ver2, val;
-	/* Need to wait 100ms after reset */
-	msleep(100);
-	/* Boot port from external ROM	*/
+	u16 fw_ver1, fw_ver2;
+	/* Boot port from external ROM  */
 	/* EDC grst */
-	bnx2x_cl45_write(bp, port, ext_phy_type, ext_phy_addr,
+	bnx2x_cl45_write(bp, port,
+		       PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8073,
+		       ext_phy_addr,
 		       MDIO_PMA_DEVAD,
 		       MDIO_PMA_REG_GEN_CTRL,
 		       0x0001);
 
 	/* ucode reboot and rst */
-	bnx2x_cl45_write(bp, port, ext_phy_type, ext_phy_addr,
+	bnx2x_cl45_write(bp, port,
+		       PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8073,
+		       ext_phy_addr,
 		       MDIO_PMA_DEVAD,
 		       MDIO_PMA_REG_GEN_CTRL,
 		       0x008c);
 
-	bnx2x_cl45_write(bp, port, ext_phy_type, ext_phy_addr,
+	bnx2x_cl45_write(bp, port,
+		       PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8073,
+		       ext_phy_addr,
 		       MDIO_PMA_DEVAD,
 		       MDIO_PMA_REG_MISC_CTRL1, 0x0001);
 
 	/* Reset internal microprocessor */
-	bnx2x_cl45_write(bp, port, ext_phy_type, ext_phy_addr,
+	bnx2x_cl45_write(bp, port,
+		       PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8073,
+		       ext_phy_addr,
 		       MDIO_PMA_DEVAD,
 		       MDIO_PMA_REG_GEN_CTRL,
 		       MDIO_PMA_REG_GEN_CTRL_ROM_MICRO_RESET);
 
 	/* Release srst bit */
-	bnx2x_cl45_write(bp, port, ext_phy_type, ext_phy_addr,
+	bnx2x_cl45_write(bp, port,
+		       PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8073,
+		       ext_phy_addr,
 		       MDIO_PMA_DEVAD,
 		       MDIO_PMA_REG_GEN_CTRL,
 		       MDIO_PMA_REG_GEN_CTRL_ROM_RESET_INTERNAL_MP);
@@ -2142,35 +2167,52 @@ static void bnx2x_bcm8073_external_rom_boot(struct link_params *params)
 	msleep(100);
 
 	/* Clear ser_boot_ctl bit */
-	bnx2x_cl45_write(bp, port, ext_phy_type, ext_phy_addr,
+	bnx2x_cl45_write(bp, port,
+		       PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8073,
+		       ext_phy_addr,
 		       MDIO_PMA_DEVAD,
 		       MDIO_PMA_REG_MISC_CTRL1, 0x0000);
 
-	bnx2x_cl45_read(bp, port, ext_phy_type, ext_phy_addr,
-		       MDIO_PMA_DEVAD,
-		       MDIO_PMA_REG_ROM_VER1, &fw_ver1);
-	bnx2x_cl45_read(bp, port, ext_phy_type, ext_phy_addr,
-		       MDIO_PMA_DEVAD,
-		       MDIO_PMA_REG_ROM_VER2, &fw_ver2);
+	bnx2x_cl45_read(bp, port, PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8073,
+		      ext_phy_addr,
+		      MDIO_PMA_DEVAD,
+		      MDIO_PMA_REG_ROM_VER1, &fw_ver1);
+	bnx2x_cl45_read(bp, port,
+		      PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8073,
+		      ext_phy_addr,
+		      MDIO_PMA_DEVAD,
+		      MDIO_PMA_REG_ROM_VER2, &fw_ver2);
 	DP(NETIF_MSG_LINK, "8073 FW version 0x%x:0x%x\n", fw_ver1, fw_ver2);
 
-	/* Only set bit 10 = 1 (Tx power down) */
-	bnx2x_cl45_read(bp, port, ext_phy_type, ext_phy_addr,
-		       MDIO_PMA_DEVAD,
-		       MDIO_PMA_REG_TX_POWER_DOWN, &val);
+}
 
+static void bnx2x_bcm807x_force_10G(struct link_params *params)
+{
+	struct bnx2x *bp = params->bp;
+	u8 port = params->port;
+	u8 ext_phy_addr = ((params->ext_phy_config &
+				PORT_HW_CFG_XGXS_EXT_PHY_ADDR_MASK) >>
+				PORT_HW_CFG_XGXS_EXT_PHY_ADDR_SHIFT);
+	u32 ext_phy_type = XGXS_EXT_PHY_TYPE(params->ext_phy_config);
+
+	/* Force KR or KX */
 	bnx2x_cl45_write(bp, port, ext_phy_type, ext_phy_addr,
 		       MDIO_PMA_DEVAD,
-		       MDIO_PMA_REG_TX_POWER_DOWN, (val | 1<<10));
-
-	msleep(600);
-	/* Release bit 10 (Release Tx power down) */
+		       MDIO_PMA_REG_CTRL,
+		       0x2040);
 	bnx2x_cl45_write(bp, port, ext_phy_type, ext_phy_addr,
 		       MDIO_PMA_DEVAD,
-		       MDIO_PMA_REG_TX_POWER_DOWN, (val & (~(1<<10))));
-
+		       MDIO_PMA_REG_10G_CTRL2,
+		       0x000b);
+	bnx2x_cl45_write(bp, port, ext_phy_type, ext_phy_addr,
+		       MDIO_PMA_DEVAD,
+		       MDIO_PMA_REG_BCM_CTRL,
+		       0x0000);
+	bnx2x_cl45_write(bp, port, ext_phy_type, ext_phy_addr,
+		       MDIO_AN_DEVAD,
+		       MDIO_AN_REG_CTRL,
+		       0x0000);
 }
-
 static void bnx2x_bcm8073_set_xaui_low_power_mode(struct link_params *params)
 {
 	struct bnx2x *bp = params->bp;
@@ -2236,32 +2278,51 @@ static void bnx2x_bcm8073_set_xaui_low_power_mode(struct link_params *params)
 	bnx2x_cl45_write(bp, port, ext_phy_type, ext_phy_addr,
 		       MDIO_XS_DEVAD, MDIO_XS_PLL_SEQUENCER, val);
 }
-static void bnx2x_bcm807x_force_10G(struct link_params *params)
+
+static void bnx2x_8073_set_pause_cl37(struct link_params *params,
+				  struct link_vars *vars)
 {
+
 	struct bnx2x *bp = params->bp;
-	u8 port = params->port;
+	u16 cl37_val;
 	u8 ext_phy_addr = ((params->ext_phy_config &
 				PORT_HW_CFG_XGXS_EXT_PHY_ADDR_MASK) >>
 				PORT_HW_CFG_XGXS_EXT_PHY_ADDR_SHIFT);
 	u32 ext_phy_type = XGXS_EXT_PHY_TYPE(params->ext_phy_config);
 
-	/* Force KR or KX */
-	bnx2x_cl45_write(bp, port, ext_phy_type, ext_phy_addr,
-		       MDIO_PMA_DEVAD,
-		       MDIO_PMA_REG_CTRL,
-		       0x2040);
-	bnx2x_cl45_write(bp, port, ext_phy_type, ext_phy_addr,
-		       MDIO_PMA_DEVAD,
-		       MDIO_PMA_REG_10G_CTRL2,
-		       0x000b);
-	bnx2x_cl45_write(bp, port, ext_phy_type, ext_phy_addr,
-		       MDIO_PMA_DEVAD,
-		       MDIO_PMA_REG_BCM_CTRL,
-		       0x0000);
-	bnx2x_cl45_write(bp, port, ext_phy_type, ext_phy_addr,
+	bnx2x_cl45_read(bp, params->port,
+		      ext_phy_type,
+		      ext_phy_addr,
+		      MDIO_AN_DEVAD,
+		      MDIO_AN_REG_CL37_FC_LD, &cl37_val);
+
+	cl37_val &= ~MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_BOTH;
+	/* Please refer to Table 28B-3 of 802.3ab-1999 spec. */
+
+	if ((vars->ieee_fc &
+	    MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_SYMMETRIC) ==
+	    MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_SYMMETRIC) {
+		cl37_val |=  MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_SYMMETRIC;
+	}
+	if ((vars->ieee_fc &
+	    MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_ASYMMETRIC) ==
+	    MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_ASYMMETRIC) {
+		cl37_val |=  MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_ASYMMETRIC;
+	}
+	if ((vars->ieee_fc &
+	    MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_BOTH) ==
+	    MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_BOTH) {
+		cl37_val |= MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_BOTH;
+	}
+	DP(NETIF_MSG_LINK,
+		 "Ext phy AN advertize cl37 0x%x\n", cl37_val);
+
+	bnx2x_cl45_write(bp, params->port,
+		       ext_phy_type,
+		       ext_phy_addr,
 		       MDIO_AN_DEVAD,
-		       MDIO_AN_REG_CTRL,
-		       0x0000);
+		       MDIO_AN_REG_CL37_FC_LD, cl37_val);
+	msleep(500);
 }
 
 static void bnx2x_ext_phy_set_pause(struct link_params *params,
@@ -2282,13 +2343,16 @@ static void bnx2x_ext_phy_set_pause(struct link_params *params,
 		      MDIO_AN_REG_ADV_PAUSE, &val);
 
 	val &= ~MDIO_AN_REG_ADV_PAUSE_BOTH;
+
 	/* Please refer to Table 28B-3 of 802.3ab-1999 spec. */
 
-	if (vars->ieee_fc &
+	if ((vars->ieee_fc &
+	    MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_ASYMMETRIC) ==
 	    MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_ASYMMETRIC) {
 		val |=  MDIO_AN_REG_ADV_PAUSE_ASYMMETRIC;
 	}
-	if (vars->ieee_fc &
+	if ((vars->ieee_fc &
+	    MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_BOTH) ==
 	    MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_BOTH) {
 		val |=
 		 MDIO_AN_REG_ADV_PAUSE_PAUSE;
@@ -2302,6 +2366,65 @@ static void bnx2x_ext_phy_set_pause(struct link_params *params,
 		       MDIO_AN_REG_ADV_PAUSE, val);
 }
 
+
+static void bnx2x_init_internal_phy(struct link_params *params,
+				struct link_vars *vars)
+{
+	struct bnx2x *bp = params->bp;
+	u8 port = params->port;
+	if (!(vars->phy_flags & PHY_SGMII_FLAG)) {
+		u16 bank, rx_eq;
+
+		rx_eq = ((params->serdes_config &
+			  PORT_HW_CFG_SERDES_RX_DRV_EQUALIZER_MASK) >>
+			 PORT_HW_CFG_SERDES_RX_DRV_EQUALIZER_SHIFT);
+
+		DP(NETIF_MSG_LINK, "setting rx eq to 0x%x\n", rx_eq);
+		for (bank = MDIO_REG_BANK_RX0; bank <= MDIO_REG_BANK_RX_ALL;
+		      bank += (MDIO_REG_BANK_RX1-MDIO_REG_BANK_RX0)) {
+			CL45_WR_OVER_CL22(bp, port,
+					      params->phy_addr,
+					      bank ,
+					      MDIO_RX0_RX_EQ_BOOST,
+					      ((rx_eq &
+				MDIO_RX0_RX_EQ_BOOST_EQUALIZER_CTRL_MASK) |
+				MDIO_RX0_RX_EQ_BOOST_OFFSET_CTRL));
+		}
+
+		/* forced speed requested? */
+		if (vars->line_speed != SPEED_AUTO_NEG) {
+			DP(NETIF_MSG_LINK, "not SGMII, no AN\n");
+
+			/* disable autoneg */
+			bnx2x_set_autoneg(params, vars);
+
+			/* program speed and duplex */
+			bnx2x_program_serdes(params, vars);
+
+		} else { /* AN_mode */
+			DP(NETIF_MSG_LINK, "not SGMII, AN\n");
+
+			/* AN enabled */
+			bnx2x_set_brcm_cl37_advertisment(params);
+
+			/* program duplex & pause advertisement (for aneg) */
+			bnx2x_set_ieee_aneg_advertisment(params,
+						       vars->ieee_fc);
+
+			/* enable autoneg */
+			bnx2x_set_autoneg(params, vars);
+
+			/* enable and restart AN */
+			bnx2x_restart_autoneg(params);
+		}
+
+	} else { /* SGMII mode */
+		DP(NETIF_MSG_LINK, "SGMII\n");
+
+		bnx2x_initialize_sgmii_process(params, vars);
+	}
+}
+
 static u8 bnx2x_ext_phy_init(struct link_params *params, struct link_vars *vars)
 {
 	struct bnx2x *bp = params->bp;
@@ -2343,7 +2466,6 @@ static u8 bnx2x_ext_phy_init(struct link_params *params, struct link_vars *vars)
 
 		switch (ext_phy_type) {
 		case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_DIRECT:
-			DP(NETIF_MSG_LINK, "XGXS Direct\n");
 			break;
 
 		case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8705:
@@ -2419,7 +2541,7 @@ static u8 bnx2x_ext_phy_init(struct link_params *params, struct link_vars *vars)
 					       ext_phy_type,
 					       ext_phy_addr,
 					       MDIO_AN_DEVAD,
-					       MDIO_AN_REG_CL37_FD,
+					       MDIO_AN_REG_CL37_FC_LP,
 					       0x0020);
 				/* Enable CL37 AN */
 				bnx2x_cl45_write(bp, params->port,
@@ -2458,54 +2580,43 @@ static u8 bnx2x_ext_phy_init(struct link_params *params, struct link_vars *vars)
 				rx_alarm_ctrl_val = 0x400;
 				lasi_ctrl_val = 0x0004;
 			} else {
-				/* In 8073, port1 is directed through emac0 and
-				 * port0 is directed through emac1
-				 */
 				rx_alarm_ctrl_val = (1<<2);
-				/*lasi_ctrl_val = 0x0005;*/
 				lasi_ctrl_val = 0x0004;
 			}
 
-			/* Wait for soft reset to get cleared upto 1 sec */
-			for (cnt = 0; cnt < 1000; cnt++) {
-				bnx2x_cl45_read(bp, params->port,
-					      ext_phy_type,
-					      ext_phy_addr,
-					      MDIO_PMA_DEVAD,
-					      MDIO_PMA_REG_CTRL,
-					      &ctrl);
-				if (!(ctrl & (1<<15)))
-					break;
-				msleep(1);
-			}
-			DP(NETIF_MSG_LINK,
-				"807x control reg 0x%x (after %d ms)\n",
-				ctrl, cnt);
+			/* enable LASI */
+			bnx2x_cl45_write(bp, params->port,
+				   ext_phy_type,
+				   ext_phy_addr,
+				   MDIO_PMA_DEVAD,
+				   MDIO_PMA_REG_RX_ALARM_CTRL,
+				   rx_alarm_ctrl_val);
+
+			bnx2x_cl45_write(bp, params->port,
+				       ext_phy_type,
+				       ext_phy_addr,
+				       MDIO_PMA_DEVAD,
+				       MDIO_PMA_REG_LASI_CTRL,
+				       lasi_ctrl_val);
+
+			bnx2x_8073_set_pause_cl37(params, vars);
 
 			if (ext_phy_type ==
 			    PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8072){
 				bnx2x_bcm8072_external_rom_boot(params);
 			} else {
-				bnx2x_bcm8073_external_rom_boot(params);
+
 				/* In case of 8073 with long xaui lines,
 				don't set the 8073 xaui low power*/
 				bnx2x_bcm8073_set_xaui_low_power_mode(params);
 			}
 
-			/* enable LASI */
-			bnx2x_cl45_write(bp, params->port,
-				       ext_phy_type,
-				       ext_phy_addr,
-				       MDIO_PMA_DEVAD,
-				       MDIO_PMA_REG_RX_ALARM_CTRL,
-				       rx_alarm_ctrl_val);
-
-			bnx2x_cl45_write(bp, params->port,
-				       ext_phy_type,
-				       ext_phy_addr,
-				       MDIO_PMA_DEVAD,
-				       MDIO_PMA_REG_LASI_CTRL,
-				       lasi_ctrl_val);
+			bnx2x_cl45_read(bp, params->port,
+				      ext_phy_type,
+				      ext_phy_addr,
+				      MDIO_PMA_DEVAD,
+				      0xca13,
+				      &tmp1);
 
 			bnx2x_cl45_read(bp, params->port,
 				      ext_phy_type,
@@ -2519,12 +2630,21 @@ static u8 bnx2x_ext_phy_init(struct link_params *params, struct link_vars *vars)
 			/* If this is forced speed, set to KR or KX
 			 * (all other are not supported)
 			 */
-			if (!(params->req_line_speed == SPEED_AUTO_NEG)) {
-			if (params->req_line_speed == SPEED_10000) {
-					bnx2x_bcm807x_force_10G(params);
-					DP(NETIF_MSG_LINK,
-					   "Forced speed 10G on 807X\n");
-					break;
+			if (params->loopback_mode == LOOPBACK_EXT) {
+				bnx2x_bcm807x_force_10G(params);
+				DP(NETIF_MSG_LINK,
+					"Forced speed 10G on 807X\n");
+				break;
+			} else {
+				bnx2x_cl45_write(bp, params->port,
+					       ext_phy_type, ext_phy_addr,
+					       MDIO_PMA_DEVAD,
+					       MDIO_PMA_REG_BCM_CTRL,
+					       0x0002);
+			}
+			if (params->req_line_speed != SPEED_AUTO_NEG) {
+				if (params->req_line_speed == SPEED_10000) {
+					val = (1<<7);
 				} else if (params->req_line_speed ==
 					   SPEED_2500) {
 					val = (1<<5);
@@ -2539,11 +2659,14 @@ static u8 bnx2x_ext_phy_init(struct link_params *params, struct link_vars *vars)
 					PORT_HW_CFG_SPEED_CAPABILITY_D0_10G)
 					val |= (1<<7);
 
+				/* Note that 2.5G works only when
+				used with 1G advertisment */
 				if (params->speed_cap_mask &
-					PORT_HW_CFG_SPEED_CAPABILITY_D0_1G)
+					(PORT_HW_CFG_SPEED_CAPABILITY_D0_1G |
+					 PORT_HW_CFG_SPEED_CAPABILITY_D0_2_5G))
 					val |= (1<<5);
-				DP(NETIF_MSG_LINK, "807x autoneg val = 0x%x\n", val);
-				/*val = ((1<<5)|(1<<7));*/
+				DP(NETIF_MSG_LINK,
+					 "807x autoneg val = 0x%x\n", val);
 			}
 
 			bnx2x_cl45_write(bp, params->port,
@@ -2554,20 +2677,19 @@ static u8 bnx2x_ext_phy_init(struct link_params *params, struct link_vars *vars)
 
 			if (ext_phy_type ==
 			    PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8073) {
-				/* Disable 2.5Ghz */
+
 				bnx2x_cl45_read(bp, params->port,
 					      ext_phy_type,
 					      ext_phy_addr,
 					      MDIO_AN_DEVAD,
 					      0x8329, &tmp1);
-/* SUPPORT_SPEED_CAPABILITY
-				(Due to the nature of the link order, its not
-				possible to enable 2.5G within the autoneg
-				capabilities)
-				if (params->speed_cap_mask &
-				PORT_HW_CFG_SPEED_CAPABILITY_D0_2_5G)
-*/
-				if (params->req_line_speed == SPEED_2500) {
+
+				if (((params->speed_cap_mask &
+				      PORT_HW_CFG_SPEED_CAPABILITY_D0_2_5G) &&
+				     (params->req_line_speed ==
+				      SPEED_AUTO_NEG)) ||
+				    (params->req_line_speed ==
+				     SPEED_2500)) {
 					u16 phy_ver;
 					/* Allow 2.5G for A1 and above */
 					bnx2x_cl45_read(bp, params->port,
@@ -2575,49 +2697,53 @@ static u8 bnx2x_ext_phy_init(struct link_params *params, struct link_vars *vars)
 					 ext_phy_addr,
 					 MDIO_PMA_DEVAD,
 					 0xc801, &phy_ver);
-
+					DP(NETIF_MSG_LINK, "Add 2.5G\n");
 					if (phy_ver > 0)
 						tmp1 |= 1;
 					else
 						tmp1 &= 0xfffe;
-			}
-				else
+				} else {
+					DP(NETIF_MSG_LINK, "Disable 2.5G\n");
 					tmp1 &= 0xfffe;
+				}
 
-			bnx2x_cl45_write(bp, params->port,
-				       ext_phy_type,
-				       ext_phy_addr,
-				       MDIO_AN_DEVAD,
+				bnx2x_cl45_write(bp, params->port,
+					       ext_phy_type,
+					       ext_phy_addr,
+					       MDIO_AN_DEVAD,
 					       0x8329, tmp1);
 			}
-			/* Add support for CL37 (passive mode) I */
-			bnx2x_cl45_write(bp, params->port,
+
+			/* Add support for CL37 (passive mode) II */
+
+			bnx2x_cl45_read(bp, params->port,
 				       ext_phy_type,
 				       ext_phy_addr,
 				       MDIO_AN_DEVAD,
-				       MDIO_AN_REG_CL37_CL73, 0x040c);
-			/* Add support for CL37 (passive mode) II */
+				       MDIO_AN_REG_CL37_FC_LD,
+				       &tmp1);
+
 			bnx2x_cl45_write(bp, params->port,
 				       ext_phy_type,
 				       ext_phy_addr,
 				       MDIO_AN_DEVAD,
-				       MDIO_AN_REG_CL37_FD, 0x20);
+				       MDIO_AN_REG_CL37_FC_LD, (tmp1 |
+				       ((params->req_duplex == DUPLEX_FULL) ?
+				       0x20 : 0x40)));
+
 			/* Add support for CL37 (passive mode) III */
 			bnx2x_cl45_write(bp, params->port,
 				       ext_phy_type,
 				       ext_phy_addr,
 				       MDIO_AN_DEVAD,
 				       MDIO_AN_REG_CL37_AN, 0x1000);
-			/* Restart autoneg */
-			msleep(500);
 
 			if (ext_phy_type ==
 			    PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8073) {
-
-			/* The SNR will improve about 2db by changing the
+				/* The SNR will improve about 2db by changing
 				BW and FEE main tap. Rest commands are executed
 				after link is up*/
-			/* Change FFE main cursor to 5 in EDC register */
+				/*Change FFE main cursor to 5 in EDC register*/
 				if (bnx2x_8073_is_snr_needed(params))
 					bnx2x_cl45_write(bp, params->port,
 						    ext_phy_type,
@@ -2626,25 +2752,28 @@ static u8 bnx2x_ext_phy_init(struct link_params *params, struct link_vars *vars)
 						    MDIO_PMA_REG_EDC_FFE_MAIN,
 						    0xFB0C);
 
-			/* Enable FEC (Forware Error Correction)
-			   Request in the AN */
-			bnx2x_cl45_read(bp, params->port,
-				      ext_phy_type,
-				      ext_phy_addr,
-				      MDIO_AN_DEVAD,
-				      MDIO_AN_REG_ADV2, &tmp1);
+				/* Enable FEC (Forware Error Correction)
+				Request in the AN */
+				bnx2x_cl45_read(bp, params->port,
+					      ext_phy_type,
+					      ext_phy_addr,
+					      MDIO_AN_DEVAD,
+					      MDIO_AN_REG_ADV2, &tmp1);
 
-			tmp1 |= (1<<15);
+				tmp1 |= (1<<15);
+
+				bnx2x_cl45_write(bp, params->port,
+					       ext_phy_type,
+					       ext_phy_addr,
+					       MDIO_AN_DEVAD,
+					       MDIO_AN_REG_ADV2, tmp1);
 
-			bnx2x_cl45_write(bp, params->port,
-				      ext_phy_type,
-				      ext_phy_addr,
-				      MDIO_AN_DEVAD,
-				      MDIO_AN_REG_ADV2, tmp1);
 			}
 
 			bnx2x_ext_phy_set_pause(params, vars);
 
+			/* Restart autoneg */
+			msleep(500);
 			bnx2x_cl45_write(bp, params->port,
 				       ext_phy_type,
 				       ext_phy_addr,
@@ -2701,10 +2830,7 @@ static u8 bnx2x_ext_phy_init(struct link_params *params, struct link_vars *vars)
 		}
 
 	} else { /* SerDes */
-/*		ext_phy_addr = ((bp->ext_phy_config &
-				 PORT_HW_CFG_SERDES_EXT_PHY_ADDR_MASK) >>
-				PORT_HW_CFG_SERDES_EXT_PHY_ADDR_SHIFT);
-*/
+
 		ext_phy_type = SERDES_EXT_PHY_TYPE(params->ext_phy_config);
 		switch (ext_phy_type) {
 		case PORT_HW_CFG_SERDES_EXT_PHY_TYPE_DIRECT:
@@ -2726,7 +2852,7 @@ static u8 bnx2x_ext_phy_init(struct link_params *params, struct link_vars *vars)
 
 
 static u8 bnx2x_ext_phy_is_link_up(struct link_params *params,
-				  struct link_vars *vars)
+				 struct link_vars *vars)
 {
 	struct bnx2x *bp = params->bp;
 	u32 ext_phy_type;
@@ -2767,6 +2893,8 @@ static u8 bnx2x_ext_phy_is_link_up(struct link_params *params,
 				      MDIO_PMA_REG_RX_SD, &rx_sd);
 			DP(NETIF_MSG_LINK, "8705 rx_sd 0x%x\n", rx_sd);
 			ext_phy_link_up = (rx_sd & 0x1);
+			if (ext_phy_link_up)
+				vars->line_speed = SPEED_10000;
 			break;
 
 		case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8706:
@@ -2810,6 +2938,13 @@ static u8 bnx2x_ext_phy_is_link_up(struct link_params *params,
 			 */
 			ext_phy_link_up = ((rx_sd & pcs_status & 0x1) ||
 					   (val2 & (1<<1)));
+			if (ext_phy_link_up) {
+				if (val2 & (1<<1))
+					vars->line_speed = SPEED_1000;
+				else
+					vars->line_speed = SPEED_10000;
+			}
+
 			/* clear LASI indication*/
 			bnx2x_cl45_read(bp, params->port, ext_phy_type,
 				      ext_phy_addr,
@@ -2820,6 +2955,8 @@ static u8 bnx2x_ext_phy_is_link_up(struct link_params *params,
 		case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8072:
 		case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8073:
 		{
+			u16 link_status = 0;
+			u16 an1000_status = 0;
 			if (ext_phy_type ==
 			     PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8072) {
 				bnx2x_cl45_read(bp, params->port,
@@ -2846,14 +2983,9 @@ static u8 bnx2x_ext_phy_is_link_up(struct link_params *params,
 					      MDIO_PMA_DEVAD,
 					      MDIO_PMA_REG_LASI_STATUS, &val1);
 
-				bnx2x_cl45_read(bp, params->port,
-					      ext_phy_type,
-					      ext_phy_addr,
-					      MDIO_PMA_DEVAD,
-					      MDIO_PMA_REG_LASI_STATUS, &val2);
 				DP(NETIF_MSG_LINK,
-					 "8703 LASI status 0x%x->0x%x\n",
-					  val1, val2);
+					 "8703 LASI status 0x%x\n",
+					  val1);
 			}
 
 			/* clear the interrupt LASI status register */
@@ -2869,20 +3001,23 @@ static u8 bnx2x_ext_phy_is_link_up(struct link_params *params,
 				      MDIO_PCS_REG_STATUS, &val1);
 			DP(NETIF_MSG_LINK, "807x PCS status 0x%x->0x%x\n",
 			   val2, val1);
-			/* Check the LASI */
+			/* Clear MSG-OUT */
 			bnx2x_cl45_read(bp, params->port,
 				      ext_phy_type,
 				      ext_phy_addr,
 				      MDIO_PMA_DEVAD,
-				      MDIO_PMA_REG_RX_ALARM, &val2);
+				      0xca13,
+				      &val1);
+
+			/* Check the LASI */
 			bnx2x_cl45_read(bp, params->port,
 				      ext_phy_type,
 				      ext_phy_addr,
 				      MDIO_PMA_DEVAD,
-				      MDIO_PMA_REG_RX_ALARM,
-				      &val1);
-			DP(NETIF_MSG_LINK, "KR 0x9003 0x%x->0x%x\n",
-			   val2, val1);
+				      MDIO_PMA_REG_RX_ALARM, &val2);
+
+			DP(NETIF_MSG_LINK, "KR 0x9003 0x%x\n", val2);
+
 			/* Check the link status */
 			bnx2x_cl45_read(bp, params->port,
 				      ext_phy_type,
@@ -2905,29 +3040,29 @@ static u8 bnx2x_ext_phy_is_link_up(struct link_params *params,
 			DP(NETIF_MSG_LINK, "PMA_REG_STATUS=0x%x\n", val1);
 			if (ext_phy_type ==
 			    PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8073) {
-				u16 an1000_status = 0;
+
 				if (ext_phy_link_up &&
-				    (
-				     (params->req_line_speed != SPEED_10000)
-				     )) {
+				    ((params->req_line_speed !=
+					SPEED_10000))) {
 					if (bnx2x_bcm8073_xaui_wa(params)
 					     != 0) {
 						ext_phy_link_up = 0;
 						break;
 					}
-					bnx2x_cl45_read(bp, params->port,
+				}
+				bnx2x_cl45_read(bp, params->port,
 						      ext_phy_type,
 						      ext_phy_addr,
-						      MDIO_XS_DEVAD,
+						      MDIO_AN_DEVAD,
 						      0x8304,
 						      &an1000_status);
-					bnx2x_cl45_read(bp, params->port,
+				bnx2x_cl45_read(bp, params->port,
 						      ext_phy_type,
 						      ext_phy_addr,
-						      MDIO_XS_DEVAD,
+						      MDIO_AN_DEVAD,
 						      0x8304,
 						      &an1000_status);
-				}
+
 				/* Check the link status on 1.1.2 */
 				bnx2x_cl45_read(bp, params->port,
 					      ext_phy_type,
@@ -2943,8 +3078,8 @@ static u8 bnx2x_ext_phy_is_link_up(struct link_params *params,
 					     "an_link_status=0x%x\n",
 					  val2, val1, an1000_status);
 
-				ext_phy_link_up = (((val1 & 4) == 4) ||
-						    (an1000_status & (1<<1)));
+					ext_phy_link_up = (((val1 & 4) == 4) ||
+						(an1000_status & (1<<1)));
 				if (ext_phy_link_up &&
 				    bnx2x_8073_is_snr_needed(params)) {
 					/* The SNR will improve about 2dbby
@@ -2968,8 +3103,74 @@ static u8 bnx2x_ext_phy_is_link_up(struct link_params *params,
 						    MDIO_PMA_REG_CDR_BANDWIDTH,
 						    0x0333);
 
+
+				}
+				bnx2x_cl45_read(bp, params->port,
+						      ext_phy_type,
+						      ext_phy_addr,
+						      MDIO_PMA_DEVAD,
+						      0xc820,
+						      &link_status);
+
+				/* Bits 0..2 --> speed detected,
+				   bits 13..15--> link is down */
+				if ((link_status & (1<<2)) &&
+				    (!(link_status & (1<<15)))) {
+					ext_phy_link_up = 1;
+					vars->line_speed = SPEED_10000;
+					DP(NETIF_MSG_LINK,
+						 "port %x: External link"
+						 " up in 10G\n", params->port);
+				} else if ((link_status & (1<<1)) &&
+					   (!(link_status & (1<<14)))) {
+					ext_phy_link_up = 1;
+					vars->line_speed = SPEED_2500;
+					DP(NETIF_MSG_LINK,
+						 "port %x: External link"
+						 " up in 2.5G\n", params->port);
+				} else if ((link_status & (1<<0)) &&
+					   (!(link_status & (1<<13)))) {
+					ext_phy_link_up = 1;
+					vars->line_speed = SPEED_1000;
+					DP(NETIF_MSG_LINK,
+						 "port %x: External link"
+						 " up in 1G\n", params->port);
+				} else {
+					ext_phy_link_up = 0;
+					DP(NETIF_MSG_LINK,
+						 "port %x: External link"
+						 " is down\n", params->port);
+				}
+			} else {
+				/* See if 1G link is up for the 8072 */
+				bnx2x_cl45_read(bp, params->port,
+						      ext_phy_type,
+						      ext_phy_addr,
+						      MDIO_AN_DEVAD,
+						      0x8304,
+						      &an1000_status);
+				bnx2x_cl45_read(bp, params->port,
+						      ext_phy_type,
+						      ext_phy_addr,
+						      MDIO_AN_DEVAD,
+						      0x8304,
+						      &an1000_status);
+				if (an1000_status & (1<<1)) {
+					ext_phy_link_up = 1;
+					vars->line_speed = SPEED_1000;
+					DP(NETIF_MSG_LINK,
+						 "port %x: External link"
+						 " up in 1G\n", params->port);
+				} else if (ext_phy_link_up) {
+					ext_phy_link_up = 1;
+					vars->line_speed = SPEED_10000;
+					DP(NETIF_MSG_LINK,
+						 "port %x: External link"
+						 " up in 10G\n", params->port);
 				}
 			}
+
+
 			break;
 		}
 		case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_SFX7101:
@@ -3006,6 +3207,7 @@ static u8 bnx2x_ext_phy_is_link_up(struct link_params *params,
 					      MDIO_AN_DEVAD,
 					      MDIO_AN_REG_MASTER_STATUS,
 					      &val2);
+				vars->line_speed = SPEED_10000;
 				DP(NETIF_MSG_LINK,
 					 "SFX7101 AN status 0x%x->Master=%x\n",
 					  val2,
@@ -3100,7 +3302,7 @@ static void bnx2x_link_int_enable(struct link_params *params)
  * link management
  */
 static void bnx2x_link_int_ack(struct link_params *params,
-			     struct link_vars *vars, u16 is_10g)
+			     struct link_vars *vars, u8 is_10g)
 {
 	struct bnx2x *bp = params->bp;
 	u8 port = params->port;
@@ -3181,7 +3383,8 @@ static u8 bnx2x_format_ver(u32 num, u8 *str, u16 len)
 }
 
 
-static void bnx2x_turn_on_sf(struct bnx2x *bp, u8 port, u8 ext_phy_addr)
+static void bnx2x_turn_on_ef(struct bnx2x *bp, u8 port, u8 ext_phy_addr,
+			   u32 ext_phy_type)
 {
 	u32 cnt = 0;
 	u16 ctrl = 0;
@@ -3192,12 +3395,14 @@ static void bnx2x_turn_on_sf(struct bnx2x *bp, u8 port, u8 ext_phy_addr)
 
 	/* take ext phy out of reset */
 	bnx2x_set_gpio(bp,
-			MISC_REGISTERS_GPIO_2,
-			MISC_REGISTERS_GPIO_HIGH);
+			  MISC_REGISTERS_GPIO_2,
+			  MISC_REGISTERS_GPIO_HIGH,
+			  port);
 
 	bnx2x_set_gpio(bp,
-			MISC_REGISTERS_GPIO_1,
-			MISC_REGISTERS_GPIO_HIGH);
+			  MISC_REGISTERS_GPIO_1,
+			  MISC_REGISTERS_GPIO_HIGH,
+			  port);
 
 	/* wait for 5ms */
 	msleep(5);
@@ -3205,7 +3410,7 @@ static void bnx2x_turn_on_sf(struct bnx2x *bp, u8 port, u8 ext_phy_addr)
 	for (cnt = 0; cnt < 1000; cnt++) {
 		msleep(1);
 		bnx2x_cl45_read(bp, port,
-			      PORT_HW_CFG_XGXS_EXT_PHY_TYPE_SFX7101,
+			      ext_phy_type,
 			      ext_phy_addr,
 			      MDIO_PMA_DEVAD,
 			      MDIO_PMA_REG_CTRL,
@@ -3217,13 +3422,17 @@ static void bnx2x_turn_on_sf(struct bnx2x *bp, u8 port, u8 ext_phy_addr)
 	}
 }
 
-static void bnx2x_turn_off_sf(struct bnx2x *bp)
+static void bnx2x_turn_off_sf(struct bnx2x *bp, u8 port)
 {
 	/* put sf to reset */
-	bnx2x_set_gpio(bp, MISC_REGISTERS_GPIO_1, MISC_REGISTERS_GPIO_LOW);
 	bnx2x_set_gpio(bp,
-			MISC_REGISTERS_GPIO_2,
-			MISC_REGISTERS_GPIO_LOW);
+			  MISC_REGISTERS_GPIO_1,
+			  MISC_REGISTERS_GPIO_LOW,
+			  port);
+	bnx2x_set_gpio(bp,
+			  MISC_REGISTERS_GPIO_2,
+			  MISC_REGISTERS_GPIO_LOW,
+			  port);
 }
 
 u8 bnx2x_get_ext_phy_fw_version(struct link_params *params, u8 driver_loaded,
@@ -3253,7 +3462,8 @@ u8 bnx2x_get_ext_phy_fw_version(struct link_params *params, u8 driver_loaded,
 
 		/* Take ext phy out of reset */
 		if (!driver_loaded)
-			bnx2x_turn_on_sf(bp, params->port, ext_phy_addr);
+			bnx2x_turn_on_ef(bp, params->port, ext_phy_addr,
+				       ext_phy_type);
 
 		/*  wait for 1ms */
 		msleep(1);
@@ -3276,11 +3486,16 @@ u8 bnx2x_get_ext_phy_fw_version(struct link_params *params, u8 driver_loaded,
 		version[4] = '\0';
 
 		if (!driver_loaded)
-			bnx2x_turn_off_sf(bp);
+			bnx2x_turn_off_sf(bp, params->port);
 		break;
 	case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8072:
 	case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8073:
 	{
+		/* Take ext phy out of reset */
+		if (!driver_loaded)
+			bnx2x_turn_on_ef(bp, params->port, ext_phy_addr,
+				       ext_phy_type);
+
 		bnx2x_cl45_read(bp, params->port, ext_phy_type,
 			      ext_phy_addr,
 			      MDIO_PMA_DEVAD,
@@ -3333,7 +3548,7 @@ static void bnx2x_set_xgxs_loopback(struct link_params *params,
 	struct bnx2x *bp = params->bp;
 
 	if (is_10g) {
-		 u32 md_devad;
+		u32 md_devad;
 
 		DP(NETIF_MSG_LINK, "XGXS 10G loopback enable\n");
 
@@ -3553,6 +3768,8 @@ u8 bnx2x_set_led(struct bnx2x *bp, u8 port, u8 mode, u32 speed,
 	       u16 hw_led_mode, u32 chip_id)
 {
 	u8 rc = 0;
+	u32 tmp;
+	u32 emac_base = port ? GRCBASE_EMAC1 : GRCBASE_EMAC0;
 	DP(NETIF_MSG_LINK, "bnx2x_set_led: port %x, mode %d\n", port, mode);
 	DP(NETIF_MSG_LINK, "speed 0x%x, hw_led_mode 0x%x\n",
 		 speed, hw_led_mode);
@@ -3561,6 +3778,9 @@ u8 bnx2x_set_led(struct bnx2x *bp, u8 port, u8 mode, u32 speed,
 		REG_WR(bp, NIG_REG_LED_10G_P0 + port*4, 0);
 		REG_WR(bp, NIG_REG_LED_MODE_P0 + port*4,
 			   SHARED_HW_CFG_LED_MAC1);
+
+		tmp = EMAC_RD(bp, EMAC_REG_EMAC_LED);
+		EMAC_WR(bp, EMAC_REG_EMAC_LED, (tmp | EMAC_LED_OVERRIDE));
 		break;
 
 	case LED_MODE_OPER:
@@ -3572,6 +3792,10 @@ u8 bnx2x_set_led(struct bnx2x *bp, u8 port, u8 mode, u32 speed,
 			   LED_BLINK_RATE_VAL);
 		REG_WR(bp, NIG_REG_LED_CONTROL_BLINK_RATE_ENA_P0 +
 			   port*4, 1);
+		tmp = EMAC_RD(bp, EMAC_REG_EMAC_LED);
+		EMAC_WR(bp, EMAC_REG_EMAC_LED,
+			    (tmp & (~EMAC_LED_OVERRIDE)));
+
 		if (!CHIP_IS_E1H(bp) &&
 		    ((speed == SPEED_2500) ||
 		     (speed == SPEED_1000) ||
@@ -3622,7 +3846,8 @@ static u8 bnx2x_link_initialize(struct link_params *params,
 	struct bnx2x *bp = params->bp;
 	u8 port = params->port;
 	u8 rc = 0;
-
+	u8 non_ext_phy;
+	u32 ext_phy_type = XGXS_EXT_PHY_TYPE(params->ext_phy_config);
 	/* Activate the external PHY */
 	bnx2x_ext_phy_reset(params, vars);
 
@@ -3644,10 +3869,6 @@ static u8 bnx2x_link_initialize(struct link_params *params,
 		bnx2x_set_swap_lanes(params);
 	}
 
-	/* Set Parallel Detect */
-	if (params->req_line_speed == SPEED_AUTO_NEG)
-		bnx2x_set_parallel_detection(params, vars->phy_flags);
-
 	if (vars->phy_flags & PHY_XGXS_FLAG) {
 		if (params->req_line_speed &&
 		    ((params->req_line_speed == SPEED_100) ||
@@ -3657,68 +3878,33 @@ static u8 bnx2x_link_initialize(struct link_params *params,
 			vars->phy_flags &= ~PHY_SGMII_FLAG;
 		}
 	}
+	/* In case of external phy existance, the line speed would be the
+	 line speed linked up by the external phy. In case it is direct only,
+	  then the line_speed during initialization will be equal to the
+	   req_line_speed*/
+	vars->line_speed = params->req_line_speed;
 
-	if (!(vars->phy_flags & PHY_SGMII_FLAG)) {
-		u16 bank, rx_eq;
-
-		rx_eq = ((params->serdes_config &
-			  PORT_HW_CFG_SERDES_RX_DRV_EQUALIZER_MASK) >>
-			 PORT_HW_CFG_SERDES_RX_DRV_EQUALIZER_SHIFT);
+	bnx2x_calc_ieee_aneg_adv(params, &vars->ieee_fc);
 
-		DP(NETIF_MSG_LINK, "setting rx eq to 0x%x\n", rx_eq);
-		for (bank = MDIO_REG_BANK_RX0; bank <= MDIO_REG_BANK_RX_ALL;
-		      bank += (MDIO_REG_BANK_RX1-MDIO_REG_BANK_RX0)) {
-			CL45_WR_OVER_CL22(bp, port,
-					      params->phy_addr,
-					      bank ,
-					      MDIO_RX0_RX_EQ_BOOST,
-					      ((rx_eq &
-				MDIO_RX0_RX_EQ_BOOST_EQUALIZER_CTRL_MASK) |
-				MDIO_RX0_RX_EQ_BOOST_OFFSET_CTRL));
-		}
-
-		/* forced speed requested? */
-		if (params->req_line_speed != SPEED_AUTO_NEG) {
-			DP(NETIF_MSG_LINK, "not SGMII, no AN\n");
-
-			/* disable autoneg */
-			bnx2x_set_autoneg(params, vars);
-
-			/* program speed and duplex */
-			bnx2x_program_serdes(params);
-			vars->ieee_fc =
-				MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_NONE;
-
-		} else { /* AN_mode */
-			DP(NETIF_MSG_LINK, "not SGMII, AN\n");
-
-			/* AN enabled */
-			bnx2x_set_brcm_cl37_advertisment(params);
-
-			/* program duplex & pause advertisement (for aneg) */
-			bnx2x_set_ieee_aneg_advertisment(params,
-						       &vars->ieee_fc);
-
-			/* enable autoneg */
-			bnx2x_set_autoneg(params, vars);
-
-			/* enable and restart AN */
-			bnx2x_restart_autoneg(params);
-		}
-
-	} else { /* SGMII mode */
-		DP(NETIF_MSG_LINK, "SGMII\n");
-
-		bnx2x_initialize_sgmii_process(params);
+	/* init ext phy and enable link state int */
+	non_ext_phy = ((ext_phy_type == PORT_HW_CFG_XGXS_EXT_PHY_TYPE_DIRECT) ||
+		       (params->loopback_mode == LOOPBACK_XGXS_10) ||
+		       (params->loopback_mode == LOOPBACK_EXT_PHY));
+
+	if (non_ext_phy ||
+	    (ext_phy_type == PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8705)) {
+		if (params->req_line_speed == SPEED_AUTO_NEG)
+			bnx2x_set_parallel_detection(params, vars->phy_flags);
+		bnx2x_init_internal_phy(params, vars);
 	}
 
-	/* init ext phy and enable link state int */
-	rc |= bnx2x_ext_phy_init(params, vars);
+	if (!non_ext_phy)
+		rc |= bnx2x_ext_phy_init(params, vars);
 
 	bnx2x_bits_dis(bp, NIG_REG_STATUS_INTERRUPT_PORT0 + port*4,
-		       (NIG_STATUS_XGXS0_LINK10G |
-			NIG_STATUS_XGXS0_LINK_STATUS |
-			NIG_STATUS_SERDES0_LINK_STATUS));
+		     (NIG_STATUS_XGXS0_LINK10G |
+		      NIG_STATUS_XGXS0_LINK_STATUS |
+		      NIG_STATUS_SERDES0_LINK_STATUS));
 
 	return rc;
 
@@ -3730,15 +3916,23 @@ u8 bnx2x_phy_init(struct link_params *params, struct link_vars *vars)
 	struct bnx2x *bp = params->bp;
 
 	u32 val;
-	DP(NETIF_MSG_LINK, "Phy Initialization started\n");
+	DP(NETIF_MSG_LINK, "Phy Initialization started \n");
 	DP(NETIF_MSG_LINK, "req_speed = %d, req_flowctrl=%d\n",
 		  params->req_line_speed, params->req_flow_ctrl);
 	vars->link_status = 0;
+	vars->phy_link_up = 0;
+	vars->link_up = 0;
+	vars->line_speed = 0;
+	vars->duplex = DUPLEX_FULL;
+	vars->flow_ctrl = FLOW_CTRL_NONE;
+	vars->mac_type = MAC_TYPE_NONE;
+
 	if (params->switch_cfg ==  SWITCH_CFG_1G)
 		vars->phy_flags = PHY_SERDES_FLAG;
 	else
 		vars->phy_flags = PHY_XGXS_FLAG;
 
+
 	/* disable attentions */
 	bnx2x_bits_dis(bp, NIG_REG_MASK_INTERRUPT_PORT0 + params->port*4,
 		       (NIG_MASK_XGXS0_LINK_STATUS |
@@ -3894,6 +4088,7 @@ u8 bnx2x_phy_init(struct link_params *params, struct link_vars *vars)
 		}
 
 		bnx2x_link_initialize(params, vars);
+		msleep(30);
 		bnx2x_link_int_enable(params);
 	}
 	return 0;
@@ -3943,39 +4138,22 @@ u8 bnx2x_link_reset(struct link_params *params, struct link_vars *vars)
 			/* HW reset */
 
 			bnx2x_set_gpio(bp, MISC_REGISTERS_GPIO_1,
-				       MISC_REGISTERS_GPIO_OUTPUT_LOW);
+					  MISC_REGISTERS_GPIO_OUTPUT_LOW,
+					  port);
 
 			bnx2x_set_gpio(bp, MISC_REGISTERS_GPIO_2,
-				       MISC_REGISTERS_GPIO_OUTPUT_LOW);
+					  MISC_REGISTERS_GPIO_OUTPUT_LOW,
+					  port);
 
 			DP(NETIF_MSG_LINK, "reset external PHY\n");
-		} else {
-
-			u8 ext_phy_addr = ((ext_phy_config &
-					 PORT_HW_CFG_XGXS_EXT_PHY_ADDR_MASK) >>
-					 PORT_HW_CFG_XGXS_EXT_PHY_ADDR_SHIFT);
-
-			/* SW reset */
-			bnx2x_cl45_write(bp, port, ext_phy_type, ext_phy_addr,
-				       MDIO_PMA_DEVAD,
-				       MDIO_PMA_REG_CTRL,
-				       1<<15);
-
-			/* Set Low Power Mode */
-			bnx2x_cl45_write(bp, port, ext_phy_type, ext_phy_addr,
-				  MDIO_PMA_DEVAD,
-				  MDIO_PMA_REG_CTRL,
-				  1<<11);
-
-
-			if (ext_phy_type ==
-			    PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8073) {
-				DP(NETIF_MSG_LINK, "Setting 8073 port %d into"
+		} else if (ext_phy_type ==
+			   PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8073) {
+				DP(NETIF_MSG_LINK, "Setting 8073 port %d into "
 					 "low power mode\n",
 					 port);
 				bnx2x_set_gpio(bp, MISC_REGISTERS_GPIO_2,
-					MISC_REGISTERS_GPIO_OUTPUT_LOW);
-			}
+					MISC_REGISTERS_GPIO_OUTPUT_LOW,
+						  port);
 		}
 	}
 	/* reset the SerDes/XGXS */
@@ -3995,6 +4173,73 @@ u8 bnx2x_link_reset(struct link_params *params, struct link_vars *vars)
 	return 0;
 }
 
+static u8 bnx2x_update_link_down(struct link_params *params,
+			       struct link_vars *vars)
+{
+	struct bnx2x *bp = params->bp;
+	u8 port = params->port;
+	DP(NETIF_MSG_LINK, "Port %x: Link is down\n", port);
+	bnx2x_set_led(bp, port, LED_MODE_OFF,
+		    0, params->hw_led_mode,
+		    params->chip_id);
+
+	/* indicate no mac active */
+	vars->mac_type = MAC_TYPE_NONE;
+
+	/* update shared memory */
+	vars->link_status = 0;
+	vars->line_speed = 0;
+	bnx2x_update_mng(params, vars->link_status);
+
+	/* activate nig drain */
+	REG_WR(bp, NIG_REG_EGRESS_DRAIN0_MODE + port*4, 1);
+
+	/* reset BigMac */
+	bnx2x_bmac_rx_disable(bp, params->port);
+	REG_WR(bp, GRCBASE_MISC +
+		   MISC_REGISTERS_RESET_REG_2_CLEAR,
+		   (MISC_REGISTERS_RESET_REG_2_RST_BMAC0 << port));
+	return 0;
+}
+
+static u8 bnx2x_update_link_up(struct link_params *params,
+			     struct link_vars *vars,
+			     u8 link_10g, u32 gp_status)
+{
+	struct bnx2x *bp = params->bp;
+	u8 port = params->port;
+	u8 rc = 0;
+	vars->link_status |= LINK_STATUS_LINK_UP;
+	if (link_10g) {
+		bnx2x_bmac_enable(params, vars, 0);
+		bnx2x_set_led(bp, port, LED_MODE_OPER,
+			    SPEED_10000, params->hw_led_mode,
+			    params->chip_id);
+
+	} else {
+		bnx2x_emac_enable(params, vars, 0);
+		rc = bnx2x_emac_program(params, vars->line_speed,
+				      vars->duplex);
+
+		/* AN complete? */
+		if (gp_status & MDIO_AN_CL73_OR_37_COMPLETE) {
+			if (!(vars->phy_flags &
+			      PHY_SGMII_FLAG))
+				bnx2x_set_sgmii_tx_driver(params);
+		}
+	}
+
+	/* PBF - link up */
+	rc |= bnx2x_pbf_update(params, vars->flow_ctrl,
+			      vars->line_speed);
+
+	/* disable drain */
+	REG_WR(bp, NIG_REG_EGRESS_DRAIN0_MODE + port*4, 0);
+
+	/* update shared memory */
+	bnx2x_update_mng(params, vars->link_status);
+	return rc;
+}
 /* This function should called upon link interrupt */
 /* In case vars->link_up, driver needs to
 	1. Update the pbf
@@ -4012,10 +4257,10 @@ u8 bnx2x_link_update(struct link_params *params, struct link_vars *vars)
 {
 	struct bnx2x *bp = params->bp;
 	u8 port = params->port;
-	u16 i;
 	u16 gp_status;
-	u16 link_10g;
-	u8 rc = 0;
+	u8 link_10g;
+	u8 ext_phy_link_up, rc = 0;
+	u32 ext_phy_type;
 
 	DP(NETIF_MSG_LINK, "port %x, XGXS?%x, int_status 0x%x\n",
 	 port,
@@ -4031,15 +4276,16 @@ u8 bnx2x_link_update(struct link_params *params, struct link_vars *vars)
 	  REG_RD(bp, NIG_REG_XGXS0_STATUS_LINK10G + port*0x68),
 	  REG_RD(bp, NIG_REG_XGXS0_STATUS_LINK_STATUS + port*0x68));
 
+	ext_phy_type = XGXS_EXT_PHY_TYPE(params->ext_phy_config);
 
-	/* avoid fast toggling */
-	for (i = 0; i < 10; i++) {
-		msleep(10);
-		CL45_RD_OVER_CL22(bp, port, params->phy_addr,
-				      MDIO_REG_BANK_GP_STATUS,
-				      MDIO_GP_STATUS_TOP_AN_STATUS1,
-				      &gp_status);
-	}
+	/* Check external link change only for non-direct */
+	ext_phy_link_up = bnx2x_ext_phy_is_link_up(params, vars);
+
+	/* Read gp_status */
+	CL45_RD_OVER_CL22(bp, port, params->phy_addr,
+			      MDIO_REG_BANK_GP_STATUS,
+			      MDIO_GP_STATUS_TOP_AN_STATUS1,
+			      &gp_status);
 
 	rc = bnx2x_link_settings_status(params, vars, gp_status);
 	if (rc != 0)
@@ -4055,73 +4301,177 @@ u8 bnx2x_link_update(struct link_params *params, struct link_vars *vars)
 
 	bnx2x_link_int_ack(params, vars, link_10g);
 
+	/* In case external phy link is up, and internal link is down
+	( not initialized yet probably after link initialization, it needs
+	to be initialized.
+	Note that after link down-up as result of cable plug,
+	the xgxs link would probably become up again without the need to
+	initialize it*/
+
+	if ((ext_phy_type != PORT_HW_CFG_SERDES_EXT_PHY_TYPE_DIRECT) &&
+	    (ext_phy_type != PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8705) &&
+	    (ext_phy_link_up && !vars->phy_link_up))
+		bnx2x_init_internal_phy(params, vars);
+
 	/* link is up only if both local phy and external phy are up */
-	vars->link_up = (vars->phy_link_up &&
-			   bnx2x_ext_phy_is_link_up(params, vars));
+	vars->link_up = (ext_phy_link_up && vars->phy_link_up);
 
-	if (!vars->phy_link_up &&
-	    REG_RD(bp, NIG_REG_EMAC0_STATUS_MISC_MI_INT + port*0x18)) {
-		bnx2x_ext_phy_is_link_up(params, vars); /* Clear interrupt */
+	if (vars->link_up)
+		rc = bnx2x_update_link_up(params, vars, link_10g, gp_status);
+	else
+		rc = bnx2x_update_link_down(params, vars);
+
+	return rc;
+}
+
+static u8 bnx2x_8073_common_init_phy(struct bnx2x *bp, u32 shmem_base)
+{
+	u8 ext_phy_addr[PORT_MAX];
+	u16 val;
+	s8 port;
+
+	/* PART1 - Reset both phys */
+	for (port = PORT_MAX - 1; port >= PORT_0; port--) {
+		/* Extract the ext phy address for the port */
+		u32 ext_phy_config = REG_RD(bp, shmem_base +
+					offsetof(struct shmem_region,
+		   dev_info.port_hw_config[port].external_phy_config));
+
+		/* disable attentions */
+		bnx2x_bits_dis(bp, NIG_REG_MASK_INTERRUPT_PORT0 + port*4,
+			     (NIG_MASK_XGXS0_LINK_STATUS |
+			      NIG_MASK_XGXS0_LINK10G |
+			      NIG_MASK_SERDES0_LINK_STATUS |
+			      NIG_MASK_MI_INT));
+
+		ext_phy_addr[port] =
+			((ext_phy_config &
+			      PORT_HW_CFG_XGXS_EXT_PHY_ADDR_MASK) >>
+			      PORT_HW_CFG_XGXS_EXT_PHY_ADDR_SHIFT);
+
+		/* Need to take the phy out of low power mode in order
+			to write to access its registers */
+		bnx2x_set_gpio(bp, MISC_REGISTERS_GPIO_2,
+				  MISC_REGISTERS_GPIO_OUTPUT_HIGH, port);
+
+		/* Reset the phy */
+		bnx2x_cl45_write(bp, port,
+			       PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8073,
+			       ext_phy_addr[port],
+			       MDIO_PMA_DEVAD,
+			       MDIO_PMA_REG_CTRL,
+			       1<<15);
 	}
 
-	if (vars->link_up) {
-		vars->link_status |= LINK_STATUS_LINK_UP;
-		if (link_10g) {
-			bnx2x_bmac_enable(params, vars, 0);
-			bnx2x_set_led(bp, port, LED_MODE_OPER,
-				    SPEED_10000, params->hw_led_mode,
-				    params->chip_id);
+	/* Add delay of 150ms after reset */
+	msleep(150);
 
-		} else {
-			bnx2x_emac_enable(params, vars, 0);
-			rc = bnx2x_emac_program(params, vars->line_speed,
-					      vars->duplex);
+	/* PART2 - Download firmware to both phys */
+	for (port = PORT_MAX - 1; port >= PORT_0; port--) {
+		u16 fw_ver1;
 
-			/* AN complete? */
-			if (gp_status & MDIO_AN_CL73_OR_37_COMPLETE) {
-				if (!(vars->phy_flags &
-				      PHY_SGMII_FLAG))
-					bnx2x_set_sgmii_tx_driver(params);
-			}
+		bnx2x_bcm8073_external_rom_boot(bp, port,
+						      ext_phy_addr[port]);
+
+		bnx2x_cl45_read(bp, port, PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8073,
+			      ext_phy_addr[port],
+			      MDIO_PMA_DEVAD,
+			      MDIO_PMA_REG_ROM_VER1, &fw_ver1);
+		if (fw_ver1 == 0) {
+			DP(NETIF_MSG_LINK,
+				 "bnx2x_8073_common_init_phy port %x "
+				 "fw Download failed\n", port);
+			return -EINVAL;
 		}
 
-		/* PBF - link up */
-		rc |= bnx2x_pbf_update(params, vars->flow_ctrl,
-				      vars->line_speed);
+		/* Only set bit 10 = 1 (Tx power down) */
+		bnx2x_cl45_read(bp, port,
+			      PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8073,
+			      ext_phy_addr[port],
+			      MDIO_PMA_DEVAD,
+			      MDIO_PMA_REG_TX_POWER_DOWN, &val);
 
-		/* disable drain */
-		REG_WR(bp, NIG_REG_EGRESS_DRAIN0_MODE + port*4, 0);
+		/* Phase1 of TX_POWER_DOWN reset */
+		bnx2x_cl45_write(bp, port,
+			       PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8073,
+			       ext_phy_addr[port],
+			       MDIO_PMA_DEVAD,
+			       MDIO_PMA_REG_TX_POWER_DOWN,
+			       (val | 1<<10));
+	}
 
-		/* update shared memory */
-		bnx2x_update_mng(params, vars->link_status);
+	/* Toggle Transmitter: Power down and then up with 600ms
+	   delay between */
+	msleep(600);
 
-	} else { /* link down */
-		DP(NETIF_MSG_LINK, "Port %x: Link is down\n", params->port);
-		bnx2x_set_led(bp, port, LED_MODE_OFF,
-			    0, params->hw_led_mode,
-			    params->chip_id);
+	/* PART3 - complete TX_POWER_DOWN process, and set GPIO2 back to low */
+	for (port = PORT_MAX - 1; port >= PORT_0; port--) {
+		/* Phase2 of POWER_DOWN_RESET*/
+		/* Release bit 10 (Release Tx power down) */
+		bnx2x_cl45_read(bp, port,
+			      PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8073,
+			      ext_phy_addr[port],
+			      MDIO_PMA_DEVAD,
+			      MDIO_PMA_REG_TX_POWER_DOWN, &val);
 
-		/* indicate no mac active */
-		vars->mac_type = MAC_TYPE_NONE;
+		bnx2x_cl45_write(bp, port,
+			       PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8073,
+			       ext_phy_addr[port],
+			       MDIO_PMA_DEVAD,
+			       MDIO_PMA_REG_TX_POWER_DOWN, (val & (~(1<<10))));
+		msleep(15);
 
-		/* update shared memory */
-		vars->link_status = 0;
-		bnx2x_update_mng(params, vars->link_status);
+		/* Read modify write the SPI-ROM version select register */
+		bnx2x_cl45_read(bp, port,
+			      PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8073,
+			      ext_phy_addr[port],
+			      MDIO_PMA_DEVAD,
+			      MDIO_PMA_REG_EDC_FFE_MAIN, &val);
+		bnx2x_cl45_write(bp, port,
+			      PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8073,
+			      ext_phy_addr[port],
+			      MDIO_PMA_DEVAD,
+			      MDIO_PMA_REG_EDC_FFE_MAIN, (val | (1<<12)));
 
-		/* activate nig drain */
-		REG_WR(bp, NIG_REG_EGRESS_DRAIN0_MODE + port*4, 1);
+		/* set GPIO2 back to LOW */
+		bnx2x_set_gpio(bp, MISC_REGISTERS_GPIO_2,
+				  MISC_REGISTERS_GPIO_OUTPUT_LOW, port);
+	}
+	return 0;
 
-		/* reset BigMac */
-		bnx2x_bmac_rx_disable(bp, params->port);
-		REG_WR(bp, GRCBASE_MISC +
-			   MISC_REGISTERS_RESET_REG_2_CLEAR,
-			   (MISC_REGISTERS_RESET_REG_2_RST_BMAC0 << port));
+}
 
+u8 bnx2x_common_init_phy(struct bnx2x *bp, u32 shmem_base)
+{
+	u8 rc = 0;
+	u32 ext_phy_type;
+
+	DP(NETIF_MSG_LINK, "bnx2x_common_init_phy\n");
+
+	/* Read the ext_phy_type for arbitrary port(0) */
+	ext_phy_type = XGXS_EXT_PHY_TYPE(
+			REG_RD(bp, shmem_base +
+			   offsetof(struct shmem_region,
+			     dev_info.port_hw_config[0].external_phy_config)));
+
+	switch (ext_phy_type) {
+	case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8073:
+	{
+		rc = bnx2x_8073_common_init_phy(bp, shmem_base);
+		break;
+	}
+	default:
+		DP(NETIF_MSG_LINK,
+			 "bnx2x_common_init_phy: ext_phy 0x%x not required\n",
+			 ext_phy_type);
+		break;
 	}
 
 	return rc;
 }
 
+
+
 static void bnx2x_sfx7101_sp_sw_reset(struct bnx2x *bp, u8 port, u8 phy_addr)
 {
 	u16 val, cnt;
@@ -4154,7 +4504,7 @@ static void bnx2x_sfx7101_sp_sw_reset(struct bnx2x *bp, u8 port, u8 phy_addr)
 }
 #define RESERVED_SIZE 256
 /* max application is 160K bytes - data at end of RAM */
-#define MAX_APP_SIZE 160*1024 - RESERVED_SIZE
+#define MAX_APP_SIZE (160*1024 - RESERVED_SIZE)
 
 /* Header is 14 bytes */
 #define HEADER_SIZE 14
@@ -4192,12 +4542,12 @@ static u8 bnx2x_sfx7101_flash_download(struct bnx2x *bp, u8 port,
 		size = MAX_APP_SIZE+HEADER_SIZE;
 	}
 	DP(NETIF_MSG_LINK, "File version is %c%c\n", data[0x14e], data[0x14f]);
-	DP(NETIF_MSG_LINK, "                %c%c\n", data[0x150], data[0x151]);
+	DP(NETIF_MSG_LINK, "  	      %c%c\n", data[0x150], data[0x151]);
 	/* Put the DSP in download mode by setting FLASH_CFG[2] to 1
 	   and issuing a reset.*/
 
 	bnx2x_set_gpio(bp, MISC_REGISTERS_GPIO_0,
-			  MISC_REGISTERS_GPIO_HIGH);
+			  MISC_REGISTERS_GPIO_HIGH, port);
 
 	bnx2x_sfx7101_sp_sw_reset(bp, port, ext_phy_addr);
 
@@ -4429,7 +4779,8 @@ static u8 bnx2x_sfx7101_flash_download(struct bnx2x *bp, u8 port,
 	}
 
 	/* DSP Remove Download Mode */
-	bnx2x_set_gpio(bp, MISC_REGISTERS_GPIO_0, MISC_REGISTERS_GPIO_LOW);
+	bnx2x_set_gpio(bp, MISC_REGISTERS_GPIO_0,
+			  MISC_REGISTERS_GPIO_LOW, port);
 
 	bnx2x_sfx7101_sp_sw_reset(bp, port, ext_phy_addr);
 
@@ -4437,7 +4788,7 @@ static u8 bnx2x_sfx7101_flash_download(struct bnx2x *bp, u8 port,
 	for (cnt = 0; cnt < 100; cnt++)
 		msleep(5);
 
-	bnx2x_hw_reset(bp);
+	bnx2x_hw_reset(bp, port);
 
 	for (cnt = 0; cnt < 100; cnt++)
 		msleep(5);
@@ -4473,7 +4824,7 @@ static u8 bnx2x_sfx7101_flash_download(struct bnx2x *bp, u8 port,
 		      MDIO_PMA_REG_7101_VER2,
 		      &image_revision2);
 
-	if (data[0x14e]	!= (image_revision2&0xFF) ||
+	if (data[0x14e] != (image_revision2&0xFF) ||
 	    data[0x14f] != ((image_revision2&0xFF00)>>8) ||
 	    data[0x150] != (image_revision1&0xFF) ||
 	    data[0x151] != ((image_revision1&0xFF00)>>8)) {
@@ -4508,11 +4859,11 @@ u8 bnx2x_flash_download(struct bnx2x *bp, u8 port, u32 ext_phy_config,
 	case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_SFX7101:
 		/* Take ext phy out of reset */
 		if (!driver_loaded)
-			bnx2x_turn_on_sf(bp, port, ext_phy_addr);
+			bnx2x_turn_on_ef(bp, port, ext_phy_addr, ext_phy_type);
 		rc = bnx2x_sfx7101_flash_download(bp, port, ext_phy_addr,
 						data, size);
 		if (!driver_loaded)
-			bnx2x_turn_off_sf(bp);
+			bnx2x_turn_off_sf(bp, port);
 		break;
 	case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_DIRECT:
 	case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_FAILURE:
diff --git a/drivers/net/bnx2x_link.h b/drivers/net/bnx2x_link.h
index 714d37ac95de..86d54a17b411 100644
--- a/drivers/net/bnx2x_link.h
+++ b/drivers/net/bnx2x_link.h
@@ -55,14 +55,17 @@ struct link_params {
 #define LOOPBACK_BMAC	2
 #define LOOPBACK_XGXS_10	3
 #define LOOPBACK_EXT_PHY	4
+#define LOOPBACK_EXT 	5
 
 	u16 req_duplex;
 	u16 req_flow_ctrl;
+	u16 req_fc_auto_adv; /* Should be set to TX / BOTH when
+	req_flow_ctrl is set to AUTO */
 	u16 req_line_speed; /* Also determine AutoNeg */
 
 	/* Device parameters */
 	u8 mac_addr[6];
-	u16 mtu;
+
 
 
 	/* shmem parameters */
@@ -140,7 +143,7 @@ u8 bnx2x_cl45_write(struct bnx2x *bp, u8 port, u32 ext_phy_type,
 		  u8 phy_addr, u8 devad, u16 reg, u16 val);
 
 /* Reads the link_status from the shmem,
-   and update the link vars accordinaly */
+   and update the link vars accordingly */
 void bnx2x_link_status_update(struct link_params *input,
 			    struct link_vars *output);
 /* returns string representing the fw_version of the external phy */
@@ -149,7 +152,7 @@ u8 bnx2x_get_ext_phy_fw_version(struct link_params *params, u8 driver_loaded,
 
 /* Set/Unset the led
    Basically, the CLC takes care of the led for the link, but in case one needs
-   to set/unset the led unnatually, set the "mode" to LED_MODE_OPER to
+   to set/unset the led unnaturally, set the "mode" to LED_MODE_OPER to
    blink the led, and LED_MODE_OFF to set the led off.*/
 u8 bnx2x_set_led(struct bnx2x *bp, u8 port, u8 mode, u32 speed,
 	       u16 hw_led_mode, u32 chip_id);
@@ -164,5 +167,7 @@ u8 bnx2x_flash_download(struct bnx2x *bp, u8 port, u32 ext_phy_config,
 	otherwise link is down*/
 u8 bnx2x_test_link(struct link_params *input, struct link_vars *vars);
 
+/* One-time initialization for external phy after power up */
+u8 bnx2x_common_init_phy(struct bnx2x *bp, u32 shmem_base);
 
 #endif /* BNX2X_LINK_H */
diff --git a/drivers/net/bnx2x_main.c b/drivers/net/bnx2x_main.c
index 0263bef9cc6d..a8eb3c4a47c8 100644
--- a/drivers/net/bnx2x_main.c
+++ b/drivers/net/bnx2x_main.c
@@ -44,7 +44,6 @@
 #include <net/ip.h>
 #include <net/tcp.h>
 #include <net/checksum.h>
-#include <linux/version.h>
 #include <net/ip6_checksum.h>
 #include <linux/workqueue.h>
 #include <linux/crc32.h>
@@ -60,8 +59,8 @@
 #include "bnx2x.h"
 #include "bnx2x_init.h"
 
-#define DRV_MODULE_VERSION      "1.45.6"
-#define DRV_MODULE_RELDATE      "2008/06/23"
+#define DRV_MODULE_VERSION	"1.45.21"
+#define DRV_MODULE_RELDATE	"2008/09/03"
 #define BNX2X_BC_VER		0x040200
 
 /* Time in jiffies before concluding the transmitter is hung */
@@ -76,23 +75,21 @@ MODULE_DESCRIPTION("Broadcom NetXtreme II BCM57710 Driver");
 MODULE_LICENSE("GPL");
 MODULE_VERSION(DRV_MODULE_VERSION);
 
+static int disable_tpa;
 static int use_inta;
 static int poll;
 static int debug;
-static int disable_tpa;
-static int nomcp;
 static int load_count[3]; /* 0-common, 1-port0, 2-port1 */
 static int use_multi;
 
+module_param(disable_tpa, int, 0);
 module_param(use_inta, int, 0);
 module_param(poll, int, 0);
 module_param(debug, int, 0);
-module_param(disable_tpa, int, 0);
-module_param(nomcp, int, 0);
+MODULE_PARM_DESC(disable_tpa, "disable the TPA (LRO) feature");
 MODULE_PARM_DESC(use_inta, "use INT#A instead of MSI-X");
 MODULE_PARM_DESC(poll, "use polling (for debug)");
 MODULE_PARM_DESC(debug, "default debug msglevel");
-MODULE_PARM_DESC(nomcp, "ignore management CPU");
 
 #ifdef BNX2X_MULTI
 module_param(use_multi, int, 0);
@@ -237,17 +234,16 @@ void bnx2x_write_dmae(struct bnx2x *bp, dma_addr_t dma_addr, u32 dst_addr,
 	while (*wb_comp != DMAE_COMP_VAL) {
 		DP(BNX2X_MSG_OFF, "wb_comp 0x%08x\n", *wb_comp);
 
-		/* adjust delay for emulation/FPGA */
-		if (CHIP_REV_IS_SLOW(bp))
-			msleep(100);
-		else
-			udelay(5);
-
 		if (!cnt) {
 			BNX2X_ERR("dmae timeout!\n");
 			break;
 		}
 		cnt--;
+		/* adjust delay for emulation/FPGA */
+		if (CHIP_REV_IS_SLOW(bp))
+			msleep(100);
+		else
+			udelay(5);
 	}
 
 	mutex_unlock(&bp->dmae_mutex);
@@ -310,17 +306,16 @@ void bnx2x_read_dmae(struct bnx2x *bp, u32 src_addr, u32 len32)
 
 	while (*wb_comp != DMAE_COMP_VAL) {
 
-		/* adjust delay for emulation/FPGA */
-		if (CHIP_REV_IS_SLOW(bp))
-			msleep(100);
-		else
-			udelay(5);
-
 		if (!cnt) {
 			BNX2X_ERR("dmae timeout!\n");
 			break;
 		}
 		cnt--;
+		/* adjust delay for emulation/FPGA */
+		if (CHIP_REV_IS_SLOW(bp))
+			msleep(100);
+		else
+			udelay(5);
 	}
 	DP(BNX2X_MSG_OFF, "data [0x%08x 0x%08x 0x%08x 0x%08x]\n",
 	   bp->slowpath->wb_data[0], bp->slowpath->wb_data[1],
@@ -503,6 +498,9 @@ static void bnx2x_panic_dump(struct bnx2x *bp)
 	int i;
 	u16 j, start, end;
 
+	bp->stats_state = STATS_STATE_DISABLED;
+	DP(BNX2X_MSG_STATS, "stats_state - DISABLED\n");
+
 	BNX2X_ERR("begin crash dump -----------------\n");
 
 	for_each_queue(bp, i) {
@@ -513,17 +511,20 @@ static void bnx2x_panic_dump(struct bnx2x *bp)
 			  "  tx_bd_prod(%x)  tx_bd_cons(%x)  *tx_cons_sb(%x)\n",
 			  i, fp->tx_pkt_prod, fp->tx_pkt_cons, fp->tx_bd_prod,
 			  fp->tx_bd_cons, le16_to_cpu(*fp->tx_cons_sb));
-		BNX2X_ERR("          rx_comp_prod(%x)  rx_comp_cons(%x)"
-			  "  *rx_cons_sb(%x)  *rx_bd_cons_sb(%x)"
-			  "  rx_sge_prod(%x)  last_max_sge(%x)\n",
-			  fp->rx_comp_prod, fp->rx_comp_cons,
-			  le16_to_cpu(*fp->rx_cons_sb),
-			  le16_to_cpu(*fp->rx_bd_cons_sb),
-			  fp->rx_sge_prod, fp->last_max_sge);
-		BNX2X_ERR("          fp_c_idx(%x)  fp_u_idx(%x)"
-			  "  bd data(%x,%x)  rx_alloc_failed(%lx)\n",
-			  fp->fp_c_idx, fp->fp_u_idx, hw_prods->packets_prod,
-			  hw_prods->bds_prod, fp->rx_alloc_failed);
+		BNX2X_ERR("          rx_bd_prod(%x)  rx_bd_cons(%x)"
+			  "  *rx_bd_cons_sb(%x)  rx_comp_prod(%x)"
+			  "  rx_comp_cons(%x)  *rx_cons_sb(%x)\n",
+			  fp->rx_bd_prod, fp->rx_bd_cons,
+			  le16_to_cpu(*fp->rx_bd_cons_sb), fp->rx_comp_prod,
+			  fp->rx_comp_cons, le16_to_cpu(*fp->rx_cons_sb));
+		BNX2X_ERR("          rx_sge_prod(%x)  last_max_sge(%x)"
+			  "  fp_c_idx(%x)  *sb_c_idx(%x)  fp_u_idx(%x)"
+			  "  *sb_u_idx(%x)  bd data(%x,%x)\n",
+			  fp->rx_sge_prod, fp->last_max_sge, fp->fp_c_idx,
+			  fp->status_blk->c_status_block.status_block_index,
+			  fp->fp_u_idx,
+			  fp->status_blk->u_status_block.status_block_index,
+			  hw_prods->packets_prod, hw_prods->bds_prod);
 
 		start = TX_BD(le16_to_cpu(*fp->tx_cons_sb) - 10);
 		end = TX_BD(le16_to_cpu(*fp->tx_cons_sb) + 245);
@@ -553,8 +554,8 @@ static void bnx2x_panic_dump(struct bnx2x *bp)
 				  j, rx_bd[1], rx_bd[0], sw_bd->skb);
 		}
 
-		start = 0;
-		end = RX_SGE_CNT*NUM_RX_SGE_PAGES;
+		start = RX_SGE(fp->rx_sge_prod);
+		end = RX_SGE(fp->last_max_sge);
 		for (j = start; j < end; j++) {
 			u32 *rx_sge = (u32 *)&fp->rx_sge_ring[j];
 			struct sw_rx_page *sw_page = &fp->rx_page_ring[j];
@@ -582,9 +583,6 @@ static void bnx2x_panic_dump(struct bnx2x *bp)
 	bnx2x_fw_dump(bp);
 	bnx2x_mc_assert(bp);
 	BNX2X_ERR("end crash dump -----------------\n");
-
-	bp->stats_state = STATS_STATE_DISABLED;
-	DP(BNX2X_MSG_STATS, "stats_state - DISABLED\n");
 }
 
 static void bnx2x_int_enable(struct bnx2x *bp)
@@ -684,7 +682,8 @@ static void bnx2x_int_disable_sync(struct bnx2x *bp)
 static inline void bnx2x_ack_sb(struct bnx2x *bp, u8 sb_id,
 				u8 storm, u16 index, u8 op, u8 update)
 {
-	u32 igu_addr = (IGU_ADDR_INT_ACK + IGU_FUNC_BASE * BP_FUNC(bp)) * 8;
+	u32 hc_addr = (HC_REG_COMMAND_REG + BP_PORT(bp)*32 +
+		       COMMAND_REG_INT_ACK);
 	struct igu_ack_register igu_ack;
 
 	igu_ack.status_block_index = index;
@@ -694,9 +693,9 @@ static inline void bnx2x_ack_sb(struct bnx2x *bp, u8 sb_id,
 			 (update << IGU_ACK_REGISTER_UPDATE_INDEX_SHIFT) |
 			 (op << IGU_ACK_REGISTER_INTERRUPT_MODE_SHIFT));
 
-	DP(BNX2X_MSG_OFF, "write 0x%08x to IGU addr 0x%x\n",
-	   (*(u32 *)&igu_ack), BAR_IGU_INTMEM + igu_addr);
-	REG_WR(bp, BAR_IGU_INTMEM + igu_addr, (*(u32 *)&igu_ack));
+	DP(BNX2X_MSG_OFF, "write 0x%08x to HC addr 0x%x\n",
+	   (*(u32 *)&igu_ack), hc_addr);
+	REG_WR(bp, hc_addr, (*(u32 *)&igu_ack));
 }
 
 static inline u16 bnx2x_update_fpsb_idx(struct bnx2x_fastpath *fp)
@@ -716,36 +715,15 @@ static inline u16 bnx2x_update_fpsb_idx(struct bnx2x_fastpath *fp)
 	return rc;
 }
 
-static inline int bnx2x_has_work(struct bnx2x_fastpath *fp)
-{
-	u16 rx_cons_sb = le16_to_cpu(*fp->rx_cons_sb);
-
-	if ((rx_cons_sb & MAX_RCQ_DESC_CNT) == MAX_RCQ_DESC_CNT)
-		rx_cons_sb++;
-
-	if ((fp->rx_comp_cons != rx_cons_sb) ||
-	    (fp->tx_pkt_prod != le16_to_cpu(*fp->tx_cons_sb)) ||
-	    (fp->tx_pkt_prod != fp->tx_pkt_cons))
-		return 1;
-
-	return 0;
-}
-
 static u16 bnx2x_ack_int(struct bnx2x *bp)
 {
-	u32 igu_addr = (IGU_ADDR_SIMD_MASK + IGU_FUNC_BASE * BP_FUNC(bp)) * 8;
-	u32 result = REG_RD(bp, BAR_IGU_INTMEM + igu_addr);
+	u32 hc_addr = (HC_REG_COMMAND_REG + BP_PORT(bp)*32 +
+		       COMMAND_REG_SIMD_MASK);
+	u32 result = REG_RD(bp, hc_addr);
 
-	DP(BNX2X_MSG_OFF, "read 0x%08x from IGU addr 0x%x\n",
-	   result, BAR_IGU_INTMEM + igu_addr);
+	DP(BNX2X_MSG_OFF, "read 0x%08x from HC addr 0x%x\n",
+	   result, hc_addr);
 
-#ifdef IGU_DEBUG
-#warning IGU_DEBUG active
-	if (result == 0) {
-		BNX2X_ERR("read %x from IGU\n", result);
-		REG_WR(bp, TM_REG_TIMER_SOFT_RST, 0);
-	}
-#endif
 	return result;
 }
 
@@ -814,7 +792,7 @@ static u16 bnx2x_free_tx_pkt(struct bnx2x *bp, struct bnx2x_fastpath *fp,
 	}
 
 	/* release skb */
-	BUG_TRAP(skb);
+	WARN_ON(!skb);
 	dev_kfree_skb(skb);
 	tx_buf->first_bd = 0;
 	tx_buf->skb = NULL;
@@ -837,9 +815,9 @@ static inline u16 bnx2x_tx_avail(struct bnx2x_fastpath *fp)
 	used = SUB_S16(prod, cons) + (s16)NUM_TX_RINGS;
 
 #ifdef BNX2X_STOP_ON_ERROR
-	BUG_TRAP(used >= 0);
-	BUG_TRAP(used <= fp->bp->tx_ring_size);
-	BUG_TRAP((fp->bp->tx_ring_size - used) <= MAX_TX_AVAIL);
+	WARN_ON(used < 0);
+	WARN_ON(used > fp->bp->tx_ring_size);
+	WARN_ON((fp->bp->tx_ring_size - used) > MAX_TX_AVAIL);
 #endif
 
 	return (s16)(fp->bp->tx_ring_size) - used;
@@ -898,6 +876,7 @@ static void bnx2x_tx_int(struct bnx2x_fastpath *fp, int work)
 		netif_tx_lock(bp->dev);
 
 		if (netif_queue_stopped(bp->dev) &&
+		    (bp->state == BNX2X_STATE_OPEN) &&
 		    (bnx2x_tx_avail(fp) >= MAX_SKB_FRAGS + 3))
 			netif_wake_queue(bp->dev);
 
@@ -905,6 +884,7 @@ static void bnx2x_tx_int(struct bnx2x_fastpath *fp, int work)
 	}
 }
 
+
 static void bnx2x_sp_event(struct bnx2x_fastpath *fp,
 			   union eth_rx_cqe *rr_cqe)
 {
@@ -960,6 +940,7 @@ static void bnx2x_sp_event(struct bnx2x_fastpath *fp,
 		bnx2x_fp(bp, cid, state) = BNX2X_FP_STATE_CLOSED;
 		break;
 
+
 	case (RAMROD_CMD_ID_ETH_SET_MAC | BNX2X_STATE_OPEN):
 	case (RAMROD_CMD_ID_ETH_SET_MAC | BNX2X_STATE_DIAG):
 		DP(NETIF_MSG_IFUP, "got set mac ramrod\n");
@@ -1020,7 +1001,7 @@ static inline int bnx2x_alloc_rx_sge(struct bnx2x *bp,
 
 	mapping = pci_map_page(bp->pdev, page, 0, BCM_PAGE_SIZE*PAGES_PER_SGE,
 			       PCI_DMA_FROMDEVICE);
-	if (unlikely(dma_mapping_error(mapping))) {
+	if (unlikely(dma_mapping_error(&bp->pdev->dev, mapping))) {
 		__free_pages(page, PAGES_PER_SGE_SHIFT);
 		return -ENOMEM;
 	}
@@ -1046,9 +1027,9 @@ static inline int bnx2x_alloc_rx_skb(struct bnx2x *bp,
 	if (unlikely(skb == NULL))
 		return -ENOMEM;
 
-	mapping = pci_map_single(bp->pdev, skb->data, bp->rx_buf_use_size,
+	mapping = pci_map_single(bp->pdev, skb->data, bp->rx_buf_size,
 				 PCI_DMA_FROMDEVICE);
-	if (unlikely(dma_mapping_error(mapping))) {
+	if (unlikely(dma_mapping_error(&bp->pdev->dev, mapping))) {
 		dev_kfree_skb(skb);
 		return -ENOMEM;
 	}
@@ -1169,8 +1150,8 @@ static inline void bnx2x_init_sge_ring_bit_mask(struct bnx2x_fastpath *fp)
 	memset(fp->sge_mask, 0xff,
 	       (NUM_RX_SGE >> RX_SGE_MASK_ELEM_SHIFT)*sizeof(u64));
 
-	/* Clear the two last indeces in the page to 1:
-	   these are the indeces that correspond to the "next" element,
+	/* Clear the two last indices in the page to 1:
+	   these are the indices that correspond to the "next" element,
 	   hence will never be indicated and should be removed from
 	   the calculations. */
 	bnx2x_clear_sge_mask_next_elems(fp);
@@ -1188,7 +1169,7 @@ static void bnx2x_tpa_start(struct bnx2x_fastpath *fp, u16 queue,
 	/* move empty skb from pool to prod and map it */
 	prod_rx_buf->skb = fp->tpa_pool[queue].skb;
 	mapping = pci_map_single(bp->pdev, fp->tpa_pool[queue].skb->data,
-				 bp->rx_buf_use_size, PCI_DMA_FROMDEVICE);
+				 bp->rx_buf_size, PCI_DMA_FROMDEVICE);
 	pci_unmap_addr_set(prod_rx_buf, mapping, mapping);
 
 	/* move partial skb from cons to pool (don't unmap yet) */
@@ -1261,7 +1242,7 @@ static int bnx2x_fill_frag_skb(struct bnx2x *bp, struct bnx2x_fastpath *fp,
 		   where we are and drop the whole packet */
 		err = bnx2x_alloc_rx_sge(bp, fp, sge_idx);
 		if (unlikely(err)) {
-			fp->rx_alloc_failed++;
+			bp->eth_stats.rx_skb_alloc_failed++;
 			return err;
 		}
 
@@ -1295,16 +1276,15 @@ static void bnx2x_tpa_stop(struct bnx2x *bp, struct bnx2x_fastpath *fp,
 	   pool entry status to BNX2X_TPA_STOP even if new skb allocation
 	   fails. */
 	pci_unmap_single(bp->pdev, pci_unmap_addr(rx_buf, mapping),
-			 bp->rx_buf_use_size, PCI_DMA_FROMDEVICE);
+			 bp->rx_buf_size, PCI_DMA_FROMDEVICE);
 
-	/* if alloc failed drop the packet and keep the buffer in the bin */
 	if (likely(new_skb)) {
+		/* fix ip xsum and give it to the stack */
+		/* (no need to map the new skb) */
 
 		prefetch(skb);
 		prefetch(((char *)(skb)) + 128);
 
-		/* else fix ip xsum and give it to the stack */
-		/* (no need to map the new skb) */
 #ifdef BNX2X_STOP_ON_ERROR
 		if (pad + len > bp->rx_buf_size) {
 			BNX2X_ERR("skb_put is about to fail...  "
@@ -1353,9 +1333,10 @@ static void bnx2x_tpa_stop(struct bnx2x *bp, struct bnx2x_fastpath *fp,
 		fp->tpa_pool[queue].skb = new_skb;
 
 	} else {
+		/* else drop the packet and keep the buffer in the bin */
 		DP(NETIF_MSG_RX_STATUS,
 		   "Failed to allocate new skb - dropping packet!\n");
-		fp->rx_alloc_failed++;
+		bp->eth_stats.rx_skb_alloc_failed++;
 	}
 
 	fp->tpa_state[queue] = BNX2X_TPA_STOP;
@@ -1390,7 +1371,6 @@ static int bnx2x_rx_int(struct bnx2x_fastpath *fp, int budget)
 	u16 bd_cons, bd_prod, bd_prod_fw, comp_ring_cons;
 	u16 hw_comp_cons, sw_comp_cons, sw_comp_prod;
 	int rx_pkt = 0;
-	u16 queue;
 
 #ifdef BNX2X_STOP_ON_ERROR
 	if (unlikely(bp->panic))
@@ -1456,7 +1436,7 @@ static int bnx2x_rx_int(struct bnx2x_fastpath *fp, int budget)
 			if ((!fp->disable_tpa) &&
 			    (TPA_TYPE(cqe_fp_flags) !=
 					(TPA_TYPE_START | TPA_TYPE_END))) {
-				queue = cqe->fast_path_cqe.queue_index;
+				u16 queue = cqe->fast_path_cqe.queue_index;
 
 				if (TPA_TYPE(cqe_fp_flags) == TPA_TYPE_START) {
 					DP(NETIF_MSG_RX_STATUS,
@@ -1503,11 +1483,10 @@ static int bnx2x_rx_int(struct bnx2x_fastpath *fp, int budget)
 
 			/* is this an error packet? */
 			if (unlikely(cqe_fp_flags & ETH_RX_ERROR_FALGS)) {
-			/* do we sometimes forward error packets anyway? */
 				DP(NETIF_MSG_RX_ERR,
 				   "ERROR  flags %x  rx packet %u\n",
 				   cqe_fp_flags, sw_comp_cons);
-				/* TBD make sure MC counts this as a drop */
+				bp->eth_stats.rx_err_discard_pkt++;
 				goto reuse_rx;
 			}
 
@@ -1524,7 +1503,7 @@ static int bnx2x_rx_int(struct bnx2x_fastpath *fp, int budget)
 					DP(NETIF_MSG_RX_ERR,
 					   "ERROR  packet dropped "
 					   "because of alloc failure\n");
-					fp->rx_alloc_failed++;
+					bp->eth_stats.rx_skb_alloc_failed++;
 					goto reuse_rx;
 				}
 
@@ -1541,7 +1520,7 @@ static int bnx2x_rx_int(struct bnx2x_fastpath *fp, int budget)
 			} else if (bnx2x_alloc_rx_skb(bp, fp, bd_prod) == 0) {
 				pci_unmap_single(bp->pdev,
 					pci_unmap_addr(rx_buf, mapping),
-						 bp->rx_buf_use_size,
+						 bp->rx_buf_size,
 						 PCI_DMA_FROMDEVICE);
 				skb_reserve(skb, pad);
 				skb_put(skb, len);
@@ -1550,7 +1529,7 @@ static int bnx2x_rx_int(struct bnx2x_fastpath *fp, int budget)
 				DP(NETIF_MSG_RX_ERR,
 				   "ERROR  packet dropped because "
 				   "of alloc failure\n");
-				fp->rx_alloc_failed++;
+				bp->eth_stats.rx_skb_alloc_failed++;
 reuse_rx:
 				bnx2x_reuse_rx_skb(fp, skb, bd_cons, bd_prod);
 				goto next_rx;
@@ -1559,10 +1538,12 @@ reuse_rx:
 			skb->protocol = eth_type_trans(skb, bp->dev);
 
 			skb->ip_summed = CHECKSUM_NONE;
-			if (bp->rx_csum && BNX2X_RX_SUM_OK(cqe))
-				skb->ip_summed = CHECKSUM_UNNECESSARY;
-
-			/* TBD do we pass bad csum packets in promisc */
+			if (bp->rx_csum) {
+				if (likely(BNX2X_RX_CSUM_OK(cqe)))
+					skb->ip_summed = CHECKSUM_UNNECESSARY;
+				else
+					bp->eth_stats.hw_csum_err++;
+			}
 		}
 
 #ifdef BCM_VLAN
@@ -1615,6 +1596,12 @@ static irqreturn_t bnx2x_msix_fp_int(int irq, void *fp_cookie)
 	struct net_device *dev = bp->dev;
 	int index = FP_IDX(fp);
 
+	/* Return here if interrupt is disabled */
+	if (unlikely(atomic_read(&bp->intr_sem) != 0)) {
+		DP(NETIF_MSG_INTR, "called but intr_sem not 0, returning\n");
+		return IRQ_HANDLED;
+	}
+
 	DP(BNX2X_MSG_FP, "got an MSI-X interrupt on IDX:SB [%d:%d]\n",
 	   index, FP_SB_ID(fp));
 	bnx2x_ack_sb(bp, FP_SB_ID(fp), USTORM_ID, 0, IGU_INT_DISABLE, 0);
@@ -1648,17 +1635,17 @@ static irqreturn_t bnx2x_interrupt(int irq, void *dev_instance)
 	}
 	DP(NETIF_MSG_INTR, "got an interrupt  status %u\n", status);
 
-#ifdef BNX2X_STOP_ON_ERROR
-	if (unlikely(bp->panic))
-		return IRQ_HANDLED;
-#endif
-
 	/* Return here if interrupt is disabled */
 	if (unlikely(atomic_read(&bp->intr_sem) != 0)) {
 		DP(NETIF_MSG_INTR, "called but intr_sem not 0, returning\n");
 		return IRQ_HANDLED;
 	}
 
+#ifdef BNX2X_STOP_ON_ERROR
+	if (unlikely(bp->panic))
+		return IRQ_HANDLED;
+#endif
+
 	mask = 0x2 << bp->fp[0].sb_id;
 	if (status & mask) {
 		struct bnx2x_fastpath *fp = &bp->fp[0];
@@ -1699,11 +1686,12 @@ static void bnx2x_stats_handle(struct bnx2x *bp, enum bnx2x_stats_event event);
  * General service functions
  */
 
-static int bnx2x_hw_lock(struct bnx2x *bp, u32 resource)
+static int bnx2x_acquire_hw_lock(struct bnx2x *bp, u32 resource)
 {
 	u32 lock_status;
 	u32 resource_bit = (1 << resource);
-	u8 port = BP_PORT(bp);
+	int func = BP_FUNC(bp);
+	u32 hw_lock_control_reg;
 	int cnt;
 
 	/* Validating that the resource is within range */
@@ -1714,20 +1702,26 @@ static int bnx2x_hw_lock(struct bnx2x *bp, u32 resource)
 		return -EINVAL;
 	}
 
+	if (func <= 5) {
+		hw_lock_control_reg = (MISC_REG_DRIVER_CONTROL_1 + func*8);
+	} else {
+		hw_lock_control_reg =
+				(MISC_REG_DRIVER_CONTROL_7 + (func - 6)*8);
+	}
+
 	/* Validating that the resource is not already taken */
-	lock_status = REG_RD(bp, MISC_REG_DRIVER_CONTROL_1 + port*8);
+	lock_status = REG_RD(bp, hw_lock_control_reg);
 	if (lock_status & resource_bit) {
 		DP(NETIF_MSG_HW, "lock_status 0x%x  resource_bit 0x%x\n",
 		   lock_status, resource_bit);
 		return -EEXIST;
 	}
 
-	/* Try for 1 second every 5ms */
-	for (cnt = 0; cnt < 200; cnt++) {
+	/* Try for 5 second every 5ms */
+	for (cnt = 0; cnt < 1000; cnt++) {
 		/* Try to acquire the lock */
-		REG_WR(bp, MISC_REG_DRIVER_CONTROL_1 + port*8 + 4,
-		       resource_bit);
-		lock_status = REG_RD(bp, MISC_REG_DRIVER_CONTROL_1 + port*8);
+		REG_WR(bp, hw_lock_control_reg + 4, resource_bit);
+		lock_status = REG_RD(bp, hw_lock_control_reg);
 		if (lock_status & resource_bit)
 			return 0;
 
@@ -1737,11 +1731,12 @@ static int bnx2x_hw_lock(struct bnx2x *bp, u32 resource)
 	return -EAGAIN;
 }
 
-static int bnx2x_hw_unlock(struct bnx2x *bp, u32 resource)
+static int bnx2x_release_hw_lock(struct bnx2x *bp, u32 resource)
 {
 	u32 lock_status;
 	u32 resource_bit = (1 << resource);
-	u8 port = BP_PORT(bp);
+	int func = BP_FUNC(bp);
+	u32 hw_lock_control_reg;
 
 	/* Validating that the resource is within range */
 	if (resource > HW_LOCK_MAX_RESOURCE_VALUE) {
@@ -1751,20 +1746,27 @@ static int bnx2x_hw_unlock(struct bnx2x *bp, u32 resource)
 		return -EINVAL;
 	}
 
+	if (func <= 5) {
+		hw_lock_control_reg = (MISC_REG_DRIVER_CONTROL_1 + func*8);
+	} else {
+		hw_lock_control_reg =
+				(MISC_REG_DRIVER_CONTROL_7 + (func - 6)*8);
+	}
+
 	/* Validating that the resource is currently taken */
-	lock_status = REG_RD(bp, MISC_REG_DRIVER_CONTROL_1 + port*8);
+	lock_status = REG_RD(bp, hw_lock_control_reg);
 	if (!(lock_status & resource_bit)) {
 		DP(NETIF_MSG_HW, "lock_status 0x%x  resource_bit 0x%x\n",
 		   lock_status, resource_bit);
 		return -EFAULT;
 	}
 
-	REG_WR(bp, MISC_REG_DRIVER_CONTROL_1 + port*8, resource_bit);
+	REG_WR(bp, hw_lock_control_reg, resource_bit);
 	return 0;
 }
 
 /* HW Lock for shared dual port PHYs */
-static void bnx2x_phy_hw_lock(struct bnx2x *bp)
+static void bnx2x_acquire_phy_lock(struct bnx2x *bp)
 {
 	u32 ext_phy_type = XGXS_EXT_PHY_TYPE(bp->link_params.ext_phy_config);
 
@@ -1772,25 +1774,25 @@ static void bnx2x_phy_hw_lock(struct bnx2x *bp)
 
 	if ((ext_phy_type == PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8072) ||
 	    (ext_phy_type == PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8073))
-		bnx2x_hw_lock(bp, HW_LOCK_RESOURCE_8072_MDIO);
+		bnx2x_acquire_hw_lock(bp, HW_LOCK_RESOURCE_8072_MDIO);
 }
 
-static void bnx2x_phy_hw_unlock(struct bnx2x *bp)
+static void bnx2x_release_phy_lock(struct bnx2x *bp)
 {
 	u32 ext_phy_type = XGXS_EXT_PHY_TYPE(bp->link_params.ext_phy_config);
 
 	if ((ext_phy_type == PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8072) ||
 	    (ext_phy_type == PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8073))
-		bnx2x_hw_unlock(bp, HW_LOCK_RESOURCE_8072_MDIO);
+		bnx2x_release_hw_lock(bp, HW_LOCK_RESOURCE_8072_MDIO);
 
 	mutex_unlock(&bp->port.phy_mutex);
 }
 
-int bnx2x_set_gpio(struct bnx2x *bp, int gpio_num, u32 mode)
+int bnx2x_set_gpio(struct bnx2x *bp, int gpio_num, u32 mode, u8 port)
 {
 	/* The GPIO should be swapped if swap register is set and active */
 	int gpio_port = (REG_RD(bp, NIG_REG_PORT_SWAP) &&
-			 REG_RD(bp, NIG_REG_STRAP_OVERRIDE)) ^ BP_PORT(bp);
+			 REG_RD(bp, NIG_REG_STRAP_OVERRIDE)) ^ port;
 	int gpio_shift = gpio_num +
 			(gpio_port ? MISC_REGISTERS_GPIO_PORT_SHIFT : 0);
 	u32 gpio_mask = (1 << gpio_shift);
@@ -1801,7 +1803,7 @@ int bnx2x_set_gpio(struct bnx2x *bp, int gpio_num, u32 mode)
 		return -EINVAL;
 	}
 
-	bnx2x_hw_lock(bp, HW_LOCK_RESOURCE_GPIO);
+	bnx2x_acquire_hw_lock(bp, HW_LOCK_RESOURCE_GPIO);
 	/* read GPIO and mask except the float bits */
 	gpio_reg = (REG_RD(bp, MISC_REG_GPIO) & MISC_REGISTERS_GPIO_FLOAT);
 
@@ -1822,7 +1824,7 @@ int bnx2x_set_gpio(struct bnx2x *bp, int gpio_num, u32 mode)
 		gpio_reg |=  (gpio_mask << MISC_REGISTERS_GPIO_SET_POS);
 		break;
 
-	case MISC_REGISTERS_GPIO_INPUT_HI_Z :
+	case MISC_REGISTERS_GPIO_INPUT_HI_Z:
 		DP(NETIF_MSG_LINK, "Set GPIO %d (shift %d) -> input\n",
 		   gpio_num, gpio_shift);
 		/* set FLOAT */
@@ -1834,7 +1836,7 @@ int bnx2x_set_gpio(struct bnx2x *bp, int gpio_num, u32 mode)
 	}
 
 	REG_WR(bp, MISC_REG_GPIO, gpio_reg);
-	bnx2x_hw_unlock(bp, HW_LOCK_RESOURCE_GPIO);
+	bnx2x_release_hw_lock(bp, HW_LOCK_RESOURCE_GPIO);
 
 	return 0;
 }
@@ -1850,19 +1852,19 @@ static int bnx2x_set_spio(struct bnx2x *bp, int spio_num, u32 mode)
 		return -EINVAL;
 	}
 
-	bnx2x_hw_lock(bp, HW_LOCK_RESOURCE_SPIO);
+	bnx2x_acquire_hw_lock(bp, HW_LOCK_RESOURCE_SPIO);
 	/* read SPIO and mask except the float bits */
 	spio_reg = (REG_RD(bp, MISC_REG_SPIO) & MISC_REGISTERS_SPIO_FLOAT);
 
 	switch (mode) {
-	case MISC_REGISTERS_SPIO_OUTPUT_LOW :
+	case MISC_REGISTERS_SPIO_OUTPUT_LOW:
 		DP(NETIF_MSG_LINK, "Set SPIO %d -> output low\n", spio_num);
 		/* clear FLOAT and set CLR */
 		spio_reg &= ~(spio_mask << MISC_REGISTERS_SPIO_FLOAT_POS);
 		spio_reg |=  (spio_mask << MISC_REGISTERS_SPIO_CLR_POS);
 		break;
 
-	case MISC_REGISTERS_SPIO_OUTPUT_HIGH :
+	case MISC_REGISTERS_SPIO_OUTPUT_HIGH:
 		DP(NETIF_MSG_LINK, "Set SPIO %d -> output high\n", spio_num);
 		/* clear FLOAT and set SET */
 		spio_reg &= ~(spio_mask << MISC_REGISTERS_SPIO_FLOAT_POS);
@@ -1880,7 +1882,7 @@ static int bnx2x_set_spio(struct bnx2x *bp, int spio_num, u32 mode)
 	}
 
 	REG_WR(bp, MISC_REG_SPIO, spio_reg);
-	bnx2x_hw_unlock(bp, HW_LOCK_RESOURCE_SPIO);
+	bnx2x_release_hw_lock(bp, HW_LOCK_RESOURCE_SPIO);
 
 	return 0;
 }
@@ -1940,46 +1942,63 @@ static void bnx2x_link_report(struct bnx2x *bp)
 
 static u8 bnx2x_initial_phy_init(struct bnx2x *bp)
 {
-	u8 rc;
+	if (!BP_NOMCP(bp)) {
+		u8 rc;
 
-	/* Initialize link parameters structure variables */
-	bp->link_params.mtu = bp->dev->mtu;
+		/* Initialize link parameters structure variables */
+		/* It is recommended to turn off RX FC for jumbo frames
+		   for better performance */
+		if (IS_E1HMF(bp))
+			bp->link_params.req_fc_auto_adv = FLOW_CTRL_BOTH;
+		else if (bp->dev->mtu > 5000)
+			bp->link_params.req_fc_auto_adv = FLOW_CTRL_TX;
+		else
+			bp->link_params.req_fc_auto_adv = FLOW_CTRL_BOTH;
 
-	bnx2x_phy_hw_lock(bp);
-	rc = bnx2x_phy_init(&bp->link_params, &bp->link_vars);
-	bnx2x_phy_hw_unlock(bp);
+		bnx2x_acquire_phy_lock(bp);
+		rc = bnx2x_phy_init(&bp->link_params, &bp->link_vars);
+		bnx2x_release_phy_lock(bp);
 
-	if (bp->link_vars.link_up)
-		bnx2x_link_report(bp);
+		if (bp->link_vars.link_up)
+			bnx2x_link_report(bp);
 
-	bnx2x_calc_fc_adv(bp);
+		bnx2x_calc_fc_adv(bp);
 
-	return rc;
+		return rc;
+	}
+	BNX2X_ERR("Bootcode is missing -not initializing link\n");
+	return -EINVAL;
 }
 
 static void bnx2x_link_set(struct bnx2x *bp)
 {
-	bnx2x_phy_hw_lock(bp);
-	bnx2x_phy_init(&bp->link_params, &bp->link_vars);
-	bnx2x_phy_hw_unlock(bp);
+	if (!BP_NOMCP(bp)) {
+		bnx2x_acquire_phy_lock(bp);
+		bnx2x_phy_init(&bp->link_params, &bp->link_vars);
+		bnx2x_release_phy_lock(bp);
 
-	bnx2x_calc_fc_adv(bp);
+		bnx2x_calc_fc_adv(bp);
+	} else
+		BNX2X_ERR("Bootcode is missing -not setting link\n");
 }
 
 static void bnx2x__link_reset(struct bnx2x *bp)
 {
-	bnx2x_phy_hw_lock(bp);
-	bnx2x_link_reset(&bp->link_params, &bp->link_vars);
-	bnx2x_phy_hw_unlock(bp);
+	if (!BP_NOMCP(bp)) {
+		bnx2x_acquire_phy_lock(bp);
+		bnx2x_link_reset(&bp->link_params, &bp->link_vars);
+		bnx2x_release_phy_lock(bp);
+	} else
+		BNX2X_ERR("Bootcode is missing -not resetting link\n");
 }
 
 static u8 bnx2x_link_test(struct bnx2x *bp)
 {
 	u8 rc;
 
-	bnx2x_phy_hw_lock(bp);
+	bnx2x_acquire_phy_lock(bp);
 	rc = bnx2x_test_link(&bp->link_params, &bp->link_vars);
-	bnx2x_phy_hw_unlock(bp);
+	bnx2x_release_phy_lock(bp);
 
 	return rc;
 }
@@ -1991,7 +2010,7 @@ static u8 bnx2x_link_test(struct bnx2x *bp)
      sum of vn_min_rates
        or
      0 - if all the min_rates are 0.
-     In the later case fainess algorithm should be deactivated.
+     In the later case fairness algorithm should be deactivated.
      If not all min_rates are zero then those that are zeroes will
      be set to 1.
  */
@@ -2114,7 +2133,7 @@ static void bnx2x_init_vn_minmax(struct bnx2x *bp, int func,
 				FUNC_MF_CFG_MIN_BW_SHIFT) * 100;
 		/* If FAIRNESS is enabled (not all min rates are zeroes) and
 		   if current min rate is zero - set it to 1.
-		   This is a requirment of the algorithm. */
+		   This is a requirement of the algorithm. */
 		if ((vn_min_rate == 0) && wsum)
 			vn_min_rate = DEF_MIN_RATE;
 		vn_max_rate = ((vn_cfg & FUNC_MF_CFG_MAX_BW_MASK) >>
@@ -2203,9 +2222,9 @@ static void bnx2x_link_attn(struct bnx2x *bp)
 	/* Make sure that we are synced with the current statistics */
 	bnx2x_stats_handle(bp, STATS_EVENT_STOP);
 
-	bnx2x_phy_hw_lock(bp);
+	bnx2x_acquire_phy_lock(bp);
 	bnx2x_link_update(&bp->link_params, &bp->link_vars);
-	bnx2x_phy_hw_unlock(bp);
+	bnx2x_release_phy_lock(bp);
 
 	if (bp->link_vars.link_up) {
 
@@ -2357,7 +2376,7 @@ static int bnx2x_sp_post(struct bnx2x *bp, int command, int cid,
 }
 
 /* acquire split MCP access lock register */
-static int bnx2x_lock_alr(struct bnx2x *bp)
+static int bnx2x_acquire_alr(struct bnx2x *bp)
 {
 	u32 i, j, val;
 	int rc = 0;
@@ -2374,15 +2393,15 @@ static int bnx2x_lock_alr(struct bnx2x *bp)
 		msleep(5);
 	}
 	if (!(val & (1L << 31))) {
-		BNX2X_ERR("Cannot acquire nvram interface\n");
+		BNX2X_ERR("Cannot acquire MCP access lock register\n");
 		rc = -EBUSY;
 	}
 
 	return rc;
 }
 
-/* Release split MCP access lock register */
-static void bnx2x_unlock_alr(struct bnx2x *bp)
+/* release split MCP access lock register */
+static void bnx2x_release_alr(struct bnx2x *bp)
 {
 	u32 val = 0;
 
@@ -2395,7 +2414,6 @@ static inline u16 bnx2x_update_dsb_idx(struct bnx2x *bp)
 	u16 rc = 0;
 
 	barrier(); /* status block is written to by the chip */
-
 	if (bp->def_att_idx != def_sb->atten_status_block.attn_bits_index) {
 		bp->def_att_idx = def_sb->atten_status_block.attn_bits_index;
 		rc |= 1;
@@ -2426,26 +2444,31 @@ static inline u16 bnx2x_update_dsb_idx(struct bnx2x *bp)
 static void bnx2x_attn_int_asserted(struct bnx2x *bp, u32 asserted)
 {
 	int port = BP_PORT(bp);
-	int func = BP_FUNC(bp);
-	u32 igu_addr = (IGU_ADDR_ATTN_BITS_SET + IGU_FUNC_BASE * func) * 8;
+	u32 hc_addr = (HC_REG_COMMAND_REG + port*32 +
+		       COMMAND_REG_ATTN_BITS_SET);
 	u32 aeu_addr = port ? MISC_REG_AEU_MASK_ATTN_FUNC_1 :
 			      MISC_REG_AEU_MASK_ATTN_FUNC_0;
 	u32 nig_int_mask_addr = port ? NIG_REG_MASK_INTERRUPT_PORT1 :
 				       NIG_REG_MASK_INTERRUPT_PORT0;
+	u32 aeu_mask;
 
-	if (~bp->aeu_mask & (asserted & 0xff))
-		BNX2X_ERR("IGU ERROR\n");
 	if (bp->attn_state & asserted)
 		BNX2X_ERR("IGU ERROR\n");
 
+	bnx2x_acquire_hw_lock(bp, HW_LOCK_RESOURCE_PORT0_ATT_MASK + port);
+	aeu_mask = REG_RD(bp, aeu_addr);
+
 	DP(NETIF_MSG_HW, "aeu_mask %x  newly asserted %x\n",
-	   bp->aeu_mask, asserted);
-	bp->aeu_mask &= ~(asserted & 0xff);
-	DP(NETIF_MSG_HW, "after masking: aeu_mask %x\n", bp->aeu_mask);
+	   aeu_mask, asserted);
+	aeu_mask &= ~(asserted & 0xff);
+	DP(NETIF_MSG_HW, "new mask %x\n", aeu_mask);
 
-	REG_WR(bp, aeu_addr, bp->aeu_mask);
+	REG_WR(bp, aeu_addr, aeu_mask);
+	bnx2x_release_hw_lock(bp, HW_LOCK_RESOURCE_PORT0_ATT_MASK + port);
 
+	DP(NETIF_MSG_HW, "attn_state %x\n", bp->attn_state);
 	bp->attn_state |= asserted;
+	DP(NETIF_MSG_HW, "new state %x\n", bp->attn_state);
 
 	if (asserted & ATTN_HARD_WIRED_MASK) {
 		if (asserted & ATTN_NIG_FOR_FUNC) {
@@ -2500,9 +2523,9 @@ static void bnx2x_attn_int_asserted(struct bnx2x *bp, u32 asserted)
 
 	} /* if hardwired */
 
-	DP(NETIF_MSG_HW, "about to mask 0x%08x at IGU addr 0x%x\n",
-	   asserted, BAR_IGU_INTMEM + igu_addr);
-	REG_WR(bp, BAR_IGU_INTMEM + igu_addr, asserted);
+	DP(NETIF_MSG_HW, "about to mask 0x%08x at HC addr 0x%x\n",
+	   asserted, hc_addr);
+	REG_WR(bp, hc_addr, asserted);
 
 	/* now set back the mask */
 	if (asserted & ATTN_NIG_FOR_FUNC)
@@ -2527,15 +2550,16 @@ static inline void bnx2x_attn_int_deasserted0(struct bnx2x *bp, u32 attn)
 		BNX2X_ERR("SPIO5 hw attention\n");
 
 		switch (bp->common.board & SHARED_HW_CFG_BOARD_TYPE_MASK) {
+		case SHARED_HW_CFG_BOARD_TYPE_BCM957710A1021G:
 		case SHARED_HW_CFG_BOARD_TYPE_BCM957710A1022G:
 			/* Fan failure attention */
 
-			/* The PHY reset is controled by GPIO 1 */
+			/* The PHY reset is controlled by GPIO 1 */
 			bnx2x_set_gpio(bp, MISC_REGISTERS_GPIO_1,
-				       MISC_REGISTERS_GPIO_OUTPUT_LOW);
-			/* Low power mode is controled by GPIO 2 */
+				       MISC_REGISTERS_GPIO_OUTPUT_LOW, port);
+			/* Low power mode is controlled by GPIO 2 */
 			bnx2x_set_gpio(bp, MISC_REGISTERS_GPIO_2,
-				       MISC_REGISTERS_GPIO_OUTPUT_LOW);
+				       MISC_REGISTERS_GPIO_OUTPUT_LOW, port);
 			/* mark the failure */
 			bp->link_params.ext_phy_config &=
 					~PORT_HW_CFG_XGXS_EXT_PHY_TYPE_MASK;
@@ -2699,10 +2723,11 @@ static void bnx2x_attn_int_deasserted(struct bnx2x *bp, u32 deasserted)
 	int index;
 	u32 reg_addr;
 	u32 val;
+	u32 aeu_mask;
 
 	/* need to take HW lock because MCP or other port might also
 	   try to handle this event */
-	bnx2x_lock_alr(bp);
+	bnx2x_acquire_alr(bp);
 
 	attn.sig[0] = REG_RD(bp, MISC_REG_AEU_AFTER_INVERT_1_FUNC_0 + port*4);
 	attn.sig[1] = REG_RD(bp, MISC_REG_AEU_AFTER_INVERT_2_FUNC_0 + port*4);
@@ -2734,32 +2759,35 @@ static void bnx2x_attn_int_deasserted(struct bnx2x *bp, u32 deasserted)
 						HW_PRTY_ASSERT_SET_1) ||
 			    (attn.sig[2] & group_mask.sig[2] &
 						HW_PRTY_ASSERT_SET_2))
-			       BNX2X_ERR("FATAL HW block parity attention\n");
+				BNX2X_ERR("FATAL HW block parity attention\n");
 		}
 	}
 
-	bnx2x_unlock_alr(bp);
+	bnx2x_release_alr(bp);
 
-	reg_addr = (IGU_ADDR_ATTN_BITS_CLR + IGU_FUNC_BASE * BP_FUNC(bp)) * 8;
+	reg_addr = (HC_REG_COMMAND_REG + port*32 + COMMAND_REG_ATTN_BITS_CLR);
 
 	val = ~deasserted;
-/*	DP(NETIF_MSG_INTR, "write 0x%08x to IGU addr 0x%x\n",
-	   val, BAR_IGU_INTMEM + reg_addr); */
-	REG_WR(bp, BAR_IGU_INTMEM + reg_addr, val);
+	DP(NETIF_MSG_HW, "about to mask 0x%08x at HC addr 0x%x\n",
+	   val, reg_addr);
+	REG_WR(bp, reg_addr, val);
 
-	if (bp->aeu_mask & (deasserted & 0xff))
-		BNX2X_ERR("IGU BUG!\n");
 	if (~bp->attn_state & deasserted)
-		BNX2X_ERR("IGU BUG!\n");
+		BNX2X_ERR("IGU ERROR\n");
 
 	reg_addr = port ? MISC_REG_AEU_MASK_ATTN_FUNC_1 :
 			  MISC_REG_AEU_MASK_ATTN_FUNC_0;
 
-	DP(NETIF_MSG_HW, "aeu_mask %x\n", bp->aeu_mask);
-	bp->aeu_mask |= (deasserted & 0xff);
+	bnx2x_acquire_hw_lock(bp, HW_LOCK_RESOURCE_PORT0_ATT_MASK + port);
+	aeu_mask = REG_RD(bp, reg_addr);
 
-	DP(NETIF_MSG_HW, "new mask %x\n", bp->aeu_mask);
-	REG_WR(bp, reg_addr, bp->aeu_mask);
+	DP(NETIF_MSG_HW, "aeu_mask %x  newly deasserted %x\n",
+	   aeu_mask, deasserted);
+	aeu_mask |= (deasserted & 0xff);
+	DP(NETIF_MSG_HW, "new mask %x\n", aeu_mask);
+
+	REG_WR(bp, reg_addr, aeu_mask);
+	bnx2x_release_hw_lock(bp, HW_LOCK_RESOURCE_PORT0_ATT_MASK + port);
 
 	DP(NETIF_MSG_HW, "attn_state %x\n", bp->attn_state);
 	bp->attn_state &= ~deasserted;
@@ -2800,7 +2828,7 @@ static void bnx2x_sp_task(struct work_struct *work)
 
 	/* Return here if interrupt is disabled */
 	if (unlikely(atomic_read(&bp->intr_sem) != 0)) {
-		DP(BNX2X_MSG_SP, "called but intr_sem not 0, returning\n");
+		DP(NETIF_MSG_INTR, "called but intr_sem not 0, returning\n");
 		return;
 	}
 
@@ -2808,7 +2836,7 @@ static void bnx2x_sp_task(struct work_struct *work)
 /*	if (status == 0)				     */
 /*		BNX2X_ERR("spurious slowpath interrupt!\n"); */
 
-	DP(BNX2X_MSG_SP, "got a slowpath interrupt (updated %x)\n", status);
+	DP(NETIF_MSG_INTR, "got a slowpath interrupt (updated %x)\n", status);
 
 	/* HW attentions */
 	if (status & 0x1)
@@ -2838,7 +2866,7 @@ static irqreturn_t bnx2x_msix_sp_int(int irq, void *dev_instance)
 
 	/* Return here if interrupt is disabled */
 	if (unlikely(atomic_read(&bp->intr_sem) != 0)) {
-		DP(BNX2X_MSG_SP, "called but intr_sem not 0, returning\n");
+		DP(NETIF_MSG_INTR, "called but intr_sem not 0, returning\n");
 		return IRQ_HANDLED;
 	}
 
@@ -2876,11 +2904,11 @@ static irqreturn_t bnx2x_msix_sp_int(int irq, void *dev_instance)
 			/* underflow */ \
 			d_hi = m_hi - s_hi; \
 			if (d_hi > 0) { \
-			/* we can 'loan' 1 */ \
+				/* we can 'loan' 1 */ \
 				d_hi--; \
 				d_lo = m_lo + (UINT_MAX - s_lo) + 1; \
 			} else { \
-			/* m_hi <= s_hi */ \
+				/* m_hi <= s_hi */ \
 				d_hi = 0; \
 				d_lo = 0; \
 			} \
@@ -2890,7 +2918,7 @@ static irqreturn_t bnx2x_msix_sp_int(int irq, void *dev_instance)
 				d_hi = 0; \
 				d_lo = 0; \
 			} else { \
-			/* m_hi >= s_hi */ \
+				/* m_hi >= s_hi */ \
 				d_hi = m_hi - s_hi; \
 				d_lo = m_lo - s_lo; \
 			} \
@@ -2963,37 +2991,6 @@ static inline long bnx2x_hilo(u32 *hiref)
  * Init service functions
  */
 
-static void bnx2x_storm_stats_init(struct bnx2x *bp)
-{
-	int func = BP_FUNC(bp);
-
-	REG_WR(bp, BAR_XSTRORM_INTMEM + XSTORM_STATS_FLAGS_OFFSET(func), 1);
-	REG_WR(bp, BAR_XSTRORM_INTMEM +
-	       XSTORM_STATS_FLAGS_OFFSET(func) + 4, 0);
-
-	REG_WR(bp, BAR_TSTRORM_INTMEM + TSTORM_STATS_FLAGS_OFFSET(func), 1);
-	REG_WR(bp, BAR_TSTRORM_INTMEM +
-	       TSTORM_STATS_FLAGS_OFFSET(func) + 4, 0);
-
-	REG_WR(bp, BAR_CSTRORM_INTMEM + CSTORM_STATS_FLAGS_OFFSET(func), 0);
-	REG_WR(bp, BAR_CSTRORM_INTMEM +
-	       CSTORM_STATS_FLAGS_OFFSET(func) + 4, 0);
-
-	REG_WR(bp, BAR_XSTRORM_INTMEM +
-	       XSTORM_ETH_STATS_QUERY_ADDR_OFFSET(func),
-	       U64_LO(bnx2x_sp_mapping(bp, fw_stats)));
-	REG_WR(bp, BAR_XSTRORM_INTMEM +
-	       XSTORM_ETH_STATS_QUERY_ADDR_OFFSET(func) + 4,
-	       U64_HI(bnx2x_sp_mapping(bp, fw_stats)));
-
-	REG_WR(bp, BAR_TSTRORM_INTMEM +
-	       TSTORM_ETH_STATS_QUERY_ADDR_OFFSET(func),
-	       U64_LO(bnx2x_sp_mapping(bp, fw_stats)));
-	REG_WR(bp, BAR_TSTRORM_INTMEM +
-	       TSTORM_ETH_STATS_QUERY_ADDR_OFFSET(func) + 4,
-	       U64_HI(bnx2x_sp_mapping(bp, fw_stats)));
-}
-
 static void bnx2x_storm_stats_post(struct bnx2x *bp)
 {
 	if (!bp->stats_pending) {
@@ -3032,6 +3029,8 @@ static void bnx2x_stats_init(struct bnx2x *bp)
 	memset(&(bp->port.old_nig_stats), 0, sizeof(struct nig_stats));
 	bp->port.old_nig_stats.brb_discard =
 			REG_RD(bp, NIG_REG_STAT0_BRB_DISCARD + port*0x38);
+	bp->port.old_nig_stats.brb_truncate =
+			REG_RD(bp, NIG_REG_STAT0_BRB_TRUNCATE + port*0x38);
 	REG_RD_DMAE(bp, NIG_REG_STAT0_EGRESS_MAC_PKT0 + port*0x50,
 		    &(bp->port.old_nig_stats.egress_mac_pkt0_lo), 2);
 	REG_RD_DMAE(bp, NIG_REG_STAT0_EGRESS_MAC_PKT1 + port*0x50,
@@ -3101,12 +3100,12 @@ static int bnx2x_stats_comp(struct bnx2x *bp)
 
 	might_sleep();
 	while (*stats_comp != DMAE_COMP_VAL) {
-		msleep(1);
 		if (!cnt) {
 			BNX2X_ERR("timeout waiting for stats finished\n");
 			break;
 		}
 		cnt--;
+		msleep(1);
 	}
 	return 1;
 }
@@ -3451,8 +3450,7 @@ static void bnx2x_bmac_stats_update(struct bnx2x *bp)
 	UPDATE_STAT64(rx_stat_grovr, rx_stat_dot3statsframestoolong);
 	UPDATE_STAT64(rx_stat_grfrg, rx_stat_etherstatsfragments);
 	UPDATE_STAT64(rx_stat_grjbr, rx_stat_etherstatsjabbers);
-	UPDATE_STAT64(rx_stat_grxpf, rx_stat_bmac_xpf);
-	UPDATE_STAT64(rx_stat_grxcf, rx_stat_bmac_xcf);
+	UPDATE_STAT64(rx_stat_grxcf, rx_stat_maccontrolframesreceived);
 	UPDATE_STAT64(rx_stat_grxpf, rx_stat_xoffstateentered);
 	UPDATE_STAT64(rx_stat_grxpf, rx_stat_xoffpauseframesreceived);
 	UPDATE_STAT64(tx_stat_gtxpf, tx_stat_outxoffsent);
@@ -3536,6 +3534,8 @@ static int bnx2x_hw_stats_update(struct bnx2x *bp)
 
 	ADD_EXTEND_64(pstats->brb_drop_hi, pstats->brb_drop_lo,
 		      new->brb_discard - old->brb_discard);
+	ADD_EXTEND_64(estats->brb_truncate_hi, estats->brb_truncate_lo,
+		      new->brb_truncate - old->brb_truncate);
 
 	UPDATE_STAT64_NIG(egress_mac_pkt0,
 					etherstatspkts1024octetsto1522octets);
@@ -3713,8 +3713,7 @@ static void bnx2x_net_stats_update(struct bnx2x *bp)
 	nstats->rx_length_errors =
 				estats->rx_stat_etherstatsundersizepkts_lo +
 				estats->jabber_packets_received;
-	nstats->rx_over_errors = estats->brb_drop_lo +
-				 estats->brb_truncate_discard;
+	nstats->rx_over_errors = estats->brb_drop_lo + estats->brb_truncate_lo;
 	nstats->rx_crc_errors = estats->rx_stat_dot3statsfcserrors_lo;
 	nstats->rx_frame_errors = estats->rx_stat_dot3statsalignmenterrors_lo;
 	nstats->rx_fifo_errors = old_tclient->no_buff_discard;
@@ -3783,7 +3782,7 @@ static void bnx2x_stats_update(struct bnx2x *bp)
 			     bp->fp->rx_comp_cons),
 		       le16_to_cpu(*bp->fp->rx_cons_sb), nstats->rx_packets);
 		printk(KERN_DEBUG "  %s (Xoff events %u)  brb drops %u\n",
-		       netif_queue_stopped(bp->dev)? "Xoff" : "Xon",
+		       netif_queue_stopped(bp->dev) ? "Xoff" : "Xon",
 		       estats->driver_xoff, estats->brb_drop_lo);
 		printk(KERN_DEBUG "tstats: checksum_discard %u  "
 			"packets_too_big_discard %u  no_buff_discard %u  "
@@ -3994,14 +3993,14 @@ static void bnx2x_zero_sb(struct bnx2x *bp, int sb_id)
 
 	bnx2x_init_fill(bp, BAR_USTRORM_INTMEM +
 			USTORM_SB_HOST_STATUS_BLOCK_OFFSET(port, sb_id), 0,
-			sizeof(struct ustorm_def_status_block)/4);
+			sizeof(struct ustorm_status_block)/4);
 	bnx2x_init_fill(bp, BAR_CSTRORM_INTMEM +
 			CSTORM_SB_HOST_STATUS_BLOCK_OFFSET(port, sb_id), 0,
-			sizeof(struct cstorm_def_status_block)/4);
+			sizeof(struct cstorm_status_block)/4);
 }
 
-static void bnx2x_init_sb(struct bnx2x *bp, int sb_id,
-			  struct host_status_block *sb,	dma_addr_t mapping)
+static void bnx2x_init_sb(struct bnx2x *bp, struct host_status_block *sb,
+			  dma_addr_t mapping, int sb_id)
 {
 	int port = BP_PORT(bp);
 	int func = BP_FUNC(bp);
@@ -4077,7 +4076,6 @@ static void bnx2x_init_def_sb(struct bnx2x *bp,
 					    atten_status_block);
 	def_sb->atten_status_block.status_block_id = sb_id;
 
-	bp->def_att_idx = 0;
 	bp->attn_state = 0;
 
 	reg_offset = (port ? MISC_REG_AEU_ENABLE1_FUNC_1_OUT_0 :
@@ -4094,9 +4092,6 @@ static void bnx2x_init_def_sb(struct bnx2x *bp,
 					       reg_offset + 0xc + 0x10*index);
 	}
 
-	bp->aeu_mask = REG_RD(bp, (port ? MISC_REG_AEU_MASK_ATTN_FUNC_1 :
-					  MISC_REG_AEU_MASK_ATTN_FUNC_0));
-
 	reg_offset = (port ? HC_REG_ATTN_MSG1_ADDR_L :
 			     HC_REG_ATTN_MSG0_ADDR_L);
 
@@ -4114,17 +4109,13 @@ static void bnx2x_init_def_sb(struct bnx2x *bp,
 					    u_def_status_block);
 	def_sb->u_def_status_block.status_block_id = sb_id;
 
-	bp->def_u_idx = 0;
-
 	REG_WR(bp, BAR_USTRORM_INTMEM +
 	       USTORM_DEF_SB_HOST_SB_ADDR_OFFSET(func), U64_LO(section));
 	REG_WR(bp, BAR_USTRORM_INTMEM +
 	       ((USTORM_DEF_SB_HOST_SB_ADDR_OFFSET(func)) + 4),
 	       U64_HI(section));
-	REG_WR8(bp, BAR_USTRORM_INTMEM +  DEF_USB_FUNC_OFF +
+	REG_WR8(bp, BAR_USTRORM_INTMEM + DEF_USB_FUNC_OFF +
 		USTORM_DEF_SB_HOST_STATUS_BLOCK_OFFSET(func), func);
-	REG_WR(bp, BAR_USTRORM_INTMEM + USTORM_HC_BTR_OFFSET(func),
-	       BNX2X_BTR);
 
 	for (index = 0; index < HC_USTORM_DEF_SB_NUM_INDICES; index++)
 		REG_WR16(bp, BAR_USTRORM_INTMEM +
@@ -4135,17 +4126,13 @@ static void bnx2x_init_def_sb(struct bnx2x *bp,
 					    c_def_status_block);
 	def_sb->c_def_status_block.status_block_id = sb_id;
 
-	bp->def_c_idx = 0;
-
 	REG_WR(bp, BAR_CSTRORM_INTMEM +
 	       CSTORM_DEF_SB_HOST_SB_ADDR_OFFSET(func), U64_LO(section));
 	REG_WR(bp, BAR_CSTRORM_INTMEM +
 	       ((CSTORM_DEF_SB_HOST_SB_ADDR_OFFSET(func)) + 4),
 	       U64_HI(section));
-	REG_WR8(bp, BAR_CSTRORM_INTMEM +  DEF_CSB_FUNC_OFF +
+	REG_WR8(bp, BAR_CSTRORM_INTMEM + DEF_CSB_FUNC_OFF +
 		CSTORM_DEF_SB_HOST_STATUS_BLOCK_OFFSET(func), func);
-	REG_WR(bp, BAR_CSTRORM_INTMEM + CSTORM_HC_BTR_OFFSET(func),
-	       BNX2X_BTR);
 
 	for (index = 0; index < HC_CSTORM_DEF_SB_NUM_INDICES; index++)
 		REG_WR16(bp, BAR_CSTRORM_INTMEM +
@@ -4156,17 +4143,13 @@ static void bnx2x_init_def_sb(struct bnx2x *bp,
 					    t_def_status_block);
 	def_sb->t_def_status_block.status_block_id = sb_id;
 
-	bp->def_t_idx = 0;
-
 	REG_WR(bp, BAR_TSTRORM_INTMEM +
 	       TSTORM_DEF_SB_HOST_SB_ADDR_OFFSET(func), U64_LO(section));
 	REG_WR(bp, BAR_TSTRORM_INTMEM +
 	       ((TSTORM_DEF_SB_HOST_SB_ADDR_OFFSET(func)) + 4),
 	       U64_HI(section));
-	REG_WR8(bp, BAR_TSTRORM_INTMEM +  DEF_TSB_FUNC_OFF +
+	REG_WR8(bp, BAR_TSTRORM_INTMEM + DEF_TSB_FUNC_OFF +
 		TSTORM_DEF_SB_HOST_STATUS_BLOCK_OFFSET(func), func);
-	REG_WR(bp, BAR_TSTRORM_INTMEM + TSTORM_HC_BTR_OFFSET(func),
-	       BNX2X_BTR);
 
 	for (index = 0; index < HC_TSTORM_DEF_SB_NUM_INDICES; index++)
 		REG_WR16(bp, BAR_TSTRORM_INTMEM +
@@ -4177,23 +4160,20 @@ static void bnx2x_init_def_sb(struct bnx2x *bp,
 					    x_def_status_block);
 	def_sb->x_def_status_block.status_block_id = sb_id;
 
-	bp->def_x_idx = 0;
-
 	REG_WR(bp, BAR_XSTRORM_INTMEM +
 	       XSTORM_DEF_SB_HOST_SB_ADDR_OFFSET(func), U64_LO(section));
 	REG_WR(bp, BAR_XSTRORM_INTMEM +
 	       ((XSTORM_DEF_SB_HOST_SB_ADDR_OFFSET(func)) + 4),
 	       U64_HI(section));
-	REG_WR8(bp, BAR_XSTRORM_INTMEM +  DEF_XSB_FUNC_OFF +
+	REG_WR8(bp, BAR_XSTRORM_INTMEM + DEF_XSB_FUNC_OFF +
 		XSTORM_DEF_SB_HOST_STATUS_BLOCK_OFFSET(func), func);
-	REG_WR(bp, BAR_XSTRORM_INTMEM + XSTORM_HC_BTR_OFFSET(func),
-	       BNX2X_BTR);
 
 	for (index = 0; index < HC_XSTORM_DEF_SB_NUM_INDICES; index++)
 		REG_WR16(bp, BAR_XSTRORM_INTMEM +
 			 XSTORM_DEF_SB_HC_DISABLE_OFFSET(func, index), 1);
 
 	bp->stats_pending = 0;
+	bp->set_mac_pending = 0;
 
 	bnx2x_ack_sb(bp, sb_id, CSTORM_ID, 0, IGU_INT_ENABLE, 0);
 }
@@ -4209,21 +4189,25 @@ static void bnx2x_update_coalesce(struct bnx2x *bp)
 		/* HC_INDEX_U_ETH_RX_CQ_CONS */
 		REG_WR8(bp, BAR_USTRORM_INTMEM +
 			USTORM_SB_HC_TIMEOUT_OFFSET(port, sb_id,
-						   HC_INDEX_U_ETH_RX_CQ_CONS),
+						    U_SB_ETH_RX_CQ_INDEX),
 			bp->rx_ticks/12);
 		REG_WR16(bp, BAR_USTRORM_INTMEM +
 			 USTORM_SB_HC_DISABLE_OFFSET(port, sb_id,
-						   HC_INDEX_U_ETH_RX_CQ_CONS),
+						     U_SB_ETH_RX_CQ_INDEX),
+			 bp->rx_ticks ? 0 : 1);
+		REG_WR16(bp, BAR_USTRORM_INTMEM +
+			 USTORM_SB_HC_DISABLE_OFFSET(port, sb_id,
+						     U_SB_ETH_RX_BD_INDEX),
 			 bp->rx_ticks ? 0 : 1);
 
 		/* HC_INDEX_C_ETH_TX_CQ_CONS */
 		REG_WR8(bp, BAR_CSTRORM_INTMEM +
 			CSTORM_SB_HC_TIMEOUT_OFFSET(port, sb_id,
-						   HC_INDEX_C_ETH_TX_CQ_CONS),
+						    C_SB_ETH_TX_CQ_INDEX),
 			bp->tx_ticks/12);
 		REG_WR16(bp, BAR_CSTRORM_INTMEM +
 			 CSTORM_SB_HC_DISABLE_OFFSET(port, sb_id,
-						   HC_INDEX_C_ETH_TX_CQ_CONS),
+						     C_SB_ETH_TX_CQ_INDEX),
 			 bp->tx_ticks ? 0 : 1);
 	}
 }
@@ -4245,7 +4229,7 @@ static inline void bnx2x_free_tpa_pool(struct bnx2x *bp,
 		if (fp->tpa_state[i] == BNX2X_TPA_START)
 			pci_unmap_single(bp->pdev,
 					 pci_unmap_addr(rx_buf, mapping),
-					 bp->rx_buf_use_size,
+					 bp->rx_buf_size,
 					 PCI_DMA_FROMDEVICE);
 
 		dev_kfree_skb(skb);
@@ -4256,23 +4240,24 @@ static inline void bnx2x_free_tpa_pool(struct bnx2x *bp,
 static void bnx2x_init_rx_rings(struct bnx2x *bp)
 {
 	int func = BP_FUNC(bp);
-	u16 ring_prod, cqe_ring_prod = 0;
+	int max_agg_queues = CHIP_IS_E1(bp) ? ETH_MAX_AGGREGATION_QUEUES_E1 :
+					      ETH_MAX_AGGREGATION_QUEUES_E1H;
+	u16 ring_prod, cqe_ring_prod;
 	int i, j;
 
-	bp->rx_buf_use_size = bp->dev->mtu;
-	bp->rx_buf_use_size += bp->rx_offset + ETH_OVREHEAD;
-	bp->rx_buf_size = bp->rx_buf_use_size + 64;
+	bp->rx_buf_size = bp->dev->mtu;
+	bp->rx_buf_size += bp->rx_offset + ETH_OVREHEAD +
+		BCM_RX_ETH_PAYLOAD_ALIGN;
 
 	if (bp->flags & TPA_ENABLE_FLAG) {
 		DP(NETIF_MSG_IFUP,
-		   "rx_buf_use_size %d  rx_buf_size %d  effective_mtu %d\n",
-		   bp->rx_buf_use_size, bp->rx_buf_size,
-		   bp->dev->mtu + ETH_OVREHEAD);
+		   "rx_buf_size %d  effective_mtu %d\n",
+		   bp->rx_buf_size, bp->dev->mtu + ETH_OVREHEAD);
 
 		for_each_queue(bp, j) {
-			for (i = 0; i < ETH_MAX_AGGREGATION_QUEUES_E1H; i++) {
-				struct bnx2x_fastpath *fp = &bp->fp[j];
+			struct bnx2x_fastpath *fp = &bp->fp[j];
 
+			for (i = 0; i < max_agg_queues; i++) {
 				fp->tpa_pool[i].skb =
 				   netdev_alloc_skb(bp->dev, bp->rx_buf_size);
 				if (!fp->tpa_pool[i].skb) {
@@ -4352,8 +4337,7 @@ static void bnx2x_init_rx_rings(struct bnx2x *bp)
 				BNX2X_ERR("disabling TPA for queue[%d]\n", j);
 				/* Cleanup already allocated elements */
 				bnx2x_free_rx_sge_range(bp, fp, ring_prod);
-				bnx2x_free_tpa_pool(bp, fp,
-					      ETH_MAX_AGGREGATION_QUEUES_E1H);
+				bnx2x_free_tpa_pool(bp, fp, max_agg_queues);
 				fp->disable_tpa = 1;
 				ring_prod = 0;
 				break;
@@ -4363,18 +4347,18 @@ static void bnx2x_init_rx_rings(struct bnx2x *bp)
 		fp->rx_sge_prod = ring_prod;
 
 		/* Allocate BDs and initialize BD ring */
-		fp->rx_comp_cons = fp->rx_alloc_failed = 0;
+		fp->rx_comp_cons = 0;
 		cqe_ring_prod = ring_prod = 0;
 		for (i = 0; i < bp->rx_ring_size; i++) {
 			if (bnx2x_alloc_rx_skb(bp, fp, ring_prod) < 0) {
 				BNX2X_ERR("was only able to allocate "
 					  "%d rx skbs\n", i);
-				fp->rx_alloc_failed++;
+				bp->eth_stats.rx_skb_alloc_failed++;
 				break;
 			}
 			ring_prod = NEXT_RX_IDX(ring_prod);
 			cqe_ring_prod = NEXT_RCQ_IDX(cqe_ring_prod);
-			BUG_TRAP(ring_prod > i);
+			WARN_ON(ring_prod <= i);
 		}
 
 		fp->rx_bd_prod = ring_prod;
@@ -4477,9 +4461,10 @@ static void bnx2x_init_context(struct bnx2x *bp)
 		context->ustorm_st_context.common.status_block_id = sb_id;
 		context->ustorm_st_context.common.flags =
 			USTORM_ETH_ST_CONTEXT_CONFIG_ENABLE_MC_ALIGNMENT;
-		context->ustorm_st_context.common.mc_alignment_size = 64;
+		context->ustorm_st_context.common.mc_alignment_size =
+			BCM_RX_ETH_PAYLOAD_ALIGN;
 		context->ustorm_st_context.common.bd_buff_size =
-						bp->rx_buf_use_size;
+						bp->rx_buf_size;
 		context->ustorm_st_context.common.bd_page_base_hi =
 						U64_HI(fp->rx_desc_mapping);
 		context->ustorm_st_context.common.bd_page_base_lo =
@@ -4497,7 +4482,7 @@ static void bnx2x_init_context(struct bnx2x *bp)
 		}
 
 		context->cstorm_st_context.sb_index_number =
-						HC_INDEX_C_ETH_TX_CQ_CONS;
+						C_SB_ETH_TX_CQ_INDEX;
 		context->cstorm_st_context.status_block_id = sb_id;
 
 		context->xstorm_ag_context.cdu_reserved =
@@ -4535,7 +4520,7 @@ static void bnx2x_set_client_config(struct bnx2x *bp)
 	int i;
 
 	tstorm_client.mtu = bp->dev->mtu + ETH_OVREHEAD;
-	tstorm_client.statistics_counter_id = 0;
+	tstorm_client.statistics_counter_id = BP_CL_ID(bp);
 	tstorm_client.config_flags =
 				TSTORM_ETH_CLIENT_CONFIG_STATSITICS_ENABLE;
 #ifdef BCM_VLAN
@@ -4579,7 +4564,7 @@ static void bnx2x_set_storm_rx_mode(struct bnx2x *bp)
 	int func = BP_FUNC(bp);
 	int i;
 
-	DP(NETIF_MSG_RX_STATUS, "rx mode is %d\n", mode);
+	DP(NETIF_MSG_IFUP, "rx mode %d  mask 0x%x\n", mode, mask);
 
 	switch (mode) {
 	case BNX2X_RX_MODE_NONE: /* no Rx */
@@ -4617,13 +4602,46 @@ static void bnx2x_set_storm_rx_mode(struct bnx2x *bp)
 		bnx2x_set_client_config(bp);
 }
 
-static void bnx2x_init_internal(struct bnx2x *bp)
+static void bnx2x_init_internal_common(struct bnx2x *bp)
+{
+	int i;
+
+	if (bp->flags & TPA_ENABLE_FLAG) {
+		struct tstorm_eth_tpa_exist tpa = {0};
+
+		tpa.tpa_exist = 1;
+
+		REG_WR(bp, BAR_TSTRORM_INTMEM + TSTORM_TPA_EXIST_OFFSET,
+		       ((u32 *)&tpa)[0]);
+		REG_WR(bp, BAR_TSTRORM_INTMEM + TSTORM_TPA_EXIST_OFFSET + 4,
+		       ((u32 *)&tpa)[1]);
+	}
+
+	/* Zero this manually as its initialization is
+	   currently missing in the initTool */
+	for (i = 0; i < (USTORM_AGG_DATA_SIZE >> 2); i++)
+		REG_WR(bp, BAR_USTRORM_INTMEM +
+		       USTORM_AGG_DATA_OFFSET + i * 4, 0);
+}
+
+static void bnx2x_init_internal_port(struct bnx2x *bp)
+{
+	int port = BP_PORT(bp);
+
+	REG_WR(bp, BAR_USTRORM_INTMEM + USTORM_HC_BTR_OFFSET(port), BNX2X_BTR);
+	REG_WR(bp, BAR_CSTRORM_INTMEM + CSTORM_HC_BTR_OFFSET(port), BNX2X_BTR);
+	REG_WR(bp, BAR_TSTRORM_INTMEM + TSTORM_HC_BTR_OFFSET(port), BNX2X_BTR);
+	REG_WR(bp, BAR_XSTRORM_INTMEM + XSTORM_HC_BTR_OFFSET(port), BNX2X_BTR);
+}
+
+static void bnx2x_init_internal_func(struct bnx2x *bp)
 {
 	struct tstorm_eth_function_common_config tstorm_config = {0};
 	struct stats_indication_flags stats_flags = {0};
 	int port = BP_PORT(bp);
 	int func = BP_FUNC(bp);
 	int i;
+	u16 max_agg_size;
 
 	if (is_multi(bp)) {
 		tstorm_config.config_flags = MULTI_FLAGS;
@@ -4636,31 +4654,53 @@ static void bnx2x_init_internal(struct bnx2x *bp)
 	       TSTORM_FUNCTION_COMMON_CONFIG_OFFSET(func),
 	       (*(u32 *)&tstorm_config));
 
-/*	DP(NETIF_MSG_IFUP, "tstorm_config: 0x%08x\n",
-	   (*(u32 *)&tstorm_config)); */
-
 	bp->rx_mode = BNX2X_RX_MODE_NONE; /* no rx until link is up */
 	bnx2x_set_storm_rx_mode(bp);
 
+	/* reset xstorm per client statistics */
+	for (i = 0; i < sizeof(struct xstorm_per_client_stats) / 4; i++) {
+		REG_WR(bp, BAR_XSTRORM_INTMEM +
+		       XSTORM_PER_COUNTER_ID_STATS_OFFSET(port, BP_CL_ID(bp)) +
+		       i*4, 0);
+	}
+	/* reset tstorm per client statistics */
+	for (i = 0; i < sizeof(struct tstorm_per_client_stats) / 4; i++) {
+		REG_WR(bp, BAR_TSTRORM_INTMEM +
+		       TSTORM_PER_COUNTER_ID_STATS_OFFSET(port, BP_CL_ID(bp)) +
+		       i*4, 0);
+	}
+
+	/* Init statistics related context */
 	stats_flags.collect_eth = 1;
 
-	REG_WR(bp, BAR_XSTRORM_INTMEM + XSTORM_STATS_FLAGS_OFFSET(port),
+	REG_WR(bp, BAR_XSTRORM_INTMEM + XSTORM_STATS_FLAGS_OFFSET(func),
 	       ((u32 *)&stats_flags)[0]);
-	REG_WR(bp, BAR_XSTRORM_INTMEM + XSTORM_STATS_FLAGS_OFFSET(port) + 4,
+	REG_WR(bp, BAR_XSTRORM_INTMEM + XSTORM_STATS_FLAGS_OFFSET(func) + 4,
 	       ((u32 *)&stats_flags)[1]);
 
-	REG_WR(bp, BAR_TSTRORM_INTMEM + TSTORM_STATS_FLAGS_OFFSET(port),
+	REG_WR(bp, BAR_TSTRORM_INTMEM + TSTORM_STATS_FLAGS_OFFSET(func),
 	       ((u32 *)&stats_flags)[0]);
-	REG_WR(bp, BAR_TSTRORM_INTMEM + TSTORM_STATS_FLAGS_OFFSET(port) + 4,
+	REG_WR(bp, BAR_TSTRORM_INTMEM + TSTORM_STATS_FLAGS_OFFSET(func) + 4,
 	       ((u32 *)&stats_flags)[1]);
 
-	REG_WR(bp, BAR_CSTRORM_INTMEM + CSTORM_STATS_FLAGS_OFFSET(port),
+	REG_WR(bp, BAR_CSTRORM_INTMEM + CSTORM_STATS_FLAGS_OFFSET(func),
 	       ((u32 *)&stats_flags)[0]);
-	REG_WR(bp, BAR_CSTRORM_INTMEM + CSTORM_STATS_FLAGS_OFFSET(port) + 4,
+	REG_WR(bp, BAR_CSTRORM_INTMEM + CSTORM_STATS_FLAGS_OFFSET(func) + 4,
 	       ((u32 *)&stats_flags)[1]);
 
-/*	DP(NETIF_MSG_IFUP, "stats_flags: 0x%08x 0x%08x\n",
-	   ((u32 *)&stats_flags)[0], ((u32 *)&stats_flags)[1]); */
+	REG_WR(bp, BAR_XSTRORM_INTMEM +
+	       XSTORM_ETH_STATS_QUERY_ADDR_OFFSET(func),
+	       U64_LO(bnx2x_sp_mapping(bp, fw_stats)));
+	REG_WR(bp, BAR_XSTRORM_INTMEM +
+	       XSTORM_ETH_STATS_QUERY_ADDR_OFFSET(func) + 4,
+	       U64_HI(bnx2x_sp_mapping(bp, fw_stats)));
+
+	REG_WR(bp, BAR_TSTRORM_INTMEM +
+	       TSTORM_ETH_STATS_QUERY_ADDR_OFFSET(func),
+	       U64_LO(bnx2x_sp_mapping(bp, fw_stats)));
+	REG_WR(bp, BAR_TSTRORM_INTMEM +
+	       TSTORM_ETH_STATS_QUERY_ADDR_OFFSET(func) + 4,
+	       U64_HI(bnx2x_sp_mapping(bp, fw_stats)));
 
 	if (CHIP_IS_E1H(bp)) {
 		REG_WR8(bp, BAR_XSTRORM_INTMEM + XSTORM_FUNCTION_MODE_OFFSET,
@@ -4676,15 +4716,12 @@ static void bnx2x_init_internal(struct bnx2x *bp)
 			 bp->e1hov);
 	}
 
-	/* Zero this manualy as its initialization is
-	   currently missing in the initTool */
-	for (i = 0; i < USTORM_AGG_DATA_SIZE >> 2; i++)
-		REG_WR(bp, BAR_USTRORM_INTMEM +
-		       USTORM_AGG_DATA_OFFSET + 4*i, 0);
-
+	/* Init CQ ring mapping and aggregation size */
+	max_agg_size = min((u32)(bp->rx_buf_size +
+				 8*BCM_PAGE_SIZE*PAGES_PER_SGE),
+			   (u32)0xffff);
 	for_each_queue(bp, i) {
 		struct bnx2x_fastpath *fp = &bp->fp[i];
-		u16 max_agg_size;
 
 		REG_WR(bp, BAR_USTRORM_INTMEM +
 		       USTORM_CQE_PAGE_BASE_OFFSET(port, FP_CL_ID(fp)),
@@ -4693,16 +4730,34 @@ static void bnx2x_init_internal(struct bnx2x *bp)
 		       USTORM_CQE_PAGE_BASE_OFFSET(port, FP_CL_ID(fp)) + 4,
 		       U64_HI(fp->rx_comp_mapping));
 
-		max_agg_size = min((u32)(bp->rx_buf_use_size +
-					 8*BCM_PAGE_SIZE*PAGES_PER_SGE),
-				   (u32)0xffff);
 		REG_WR16(bp, BAR_USTRORM_INTMEM +
 			 USTORM_MAX_AGG_SIZE_OFFSET(port, FP_CL_ID(fp)),
 			 max_agg_size);
 	}
 }
 
-static void bnx2x_nic_init(struct bnx2x *bp)
+static void bnx2x_init_internal(struct bnx2x *bp, u32 load_code)
+{
+	switch (load_code) {
+	case FW_MSG_CODE_DRV_LOAD_COMMON:
+		bnx2x_init_internal_common(bp);
+		/* no break */
+
+	case FW_MSG_CODE_DRV_LOAD_PORT:
+		bnx2x_init_internal_port(bp);
+		/* no break */
+
+	case FW_MSG_CODE_DRV_LOAD_FUNCTION:
+		bnx2x_init_internal_func(bp);
+		break;
+
+	default:
+		BNX2X_ERR("Unknown load_code (0x%x) from MCP\n", load_code);
+		break;
+	}
+}
+
+static void bnx2x_nic_init(struct bnx2x *bp, u32 load_code)
 {
 	int i;
 
@@ -4717,19 +4772,20 @@ static void bnx2x_nic_init(struct bnx2x *bp)
 		DP(NETIF_MSG_IFUP,
 		   "bnx2x_init_sb(%p,%p) index %d  cl_id %d  sb %d\n",
 		   bp, fp->status_blk, i, FP_CL_ID(fp), FP_SB_ID(fp));
-		bnx2x_init_sb(bp, FP_SB_ID(fp), fp->status_blk,
-			      fp->status_blk_mapping);
+		bnx2x_init_sb(bp, fp->status_blk, fp->status_blk_mapping,
+			      FP_SB_ID(fp));
+		bnx2x_update_fpsb_idx(fp);
 	}
 
-	bnx2x_init_def_sb(bp, bp->def_status_blk,
-			  bp->def_status_blk_mapping, DEF_SB_ID);
+	bnx2x_init_def_sb(bp, bp->def_status_blk, bp->def_status_blk_mapping,
+			  DEF_SB_ID);
+	bnx2x_update_dsb_idx(bp);
 	bnx2x_update_coalesce(bp);
 	bnx2x_init_rx_rings(bp);
 	bnx2x_init_tx_ring(bp);
 	bnx2x_init_sp_ring(bp);
 	bnx2x_init_context(bp);
-	bnx2x_init_internal(bp);
-	bnx2x_storm_stats_init(bp);
+	bnx2x_init_internal(bp, load_code);
 	bnx2x_init_ind_table(bp);
 	bnx2x_int_enable(bp);
 }
@@ -4878,7 +4934,7 @@ static int bnx2x_int_mem_test(struct bnx2x *bp)
 	REG_WR(bp, TSDM_REG_ENABLE_IN1, 0x0);
 	REG_WR(bp, TCM_REG_PRS_IFEN, 0x0);
 	REG_WR(bp, CFC_REG_DEBUG0, 0x1);
-	NIG_WR(NIG_REG_PRS_REQ_IN_EN, 0x0);
+	REG_WR(bp, NIG_REG_PRS_REQ_IN_EN, 0x0);
 
 	/*  Write 0 to parser credits for CFC search request */
 	REG_WR(bp, PRS_REG_CFC_SEARCH_INITIAL_CREDIT, 0x0);
@@ -4933,7 +4989,7 @@ static int bnx2x_int_mem_test(struct bnx2x *bp)
 	REG_WR(bp, TSDM_REG_ENABLE_IN1, 0x0);
 	REG_WR(bp, TCM_REG_PRS_IFEN, 0x0);
 	REG_WR(bp, CFC_REG_DEBUG0, 0x1);
-	NIG_WR(NIG_REG_PRS_REQ_IN_EN, 0x0);
+	REG_WR(bp, NIG_REG_PRS_REQ_IN_EN, 0x0);
 
 	/* Write 0 to parser credits for CFC search request */
 	REG_WR(bp, PRS_REG_CFC_SEARCH_INITIAL_CREDIT, 0x0);
@@ -5000,7 +5056,7 @@ static int bnx2x_int_mem_test(struct bnx2x *bp)
 	REG_WR(bp, TSDM_REG_ENABLE_IN1, 0x7fffffff);
 	REG_WR(bp, TCM_REG_PRS_IFEN, 0x1);
 	REG_WR(bp, CFC_REG_DEBUG0, 0x0);
-	NIG_WR(NIG_REG_PRS_REQ_IN_EN, 0x1);
+	REG_WR(bp, NIG_REG_PRS_REQ_IN_EN, 0x1);
 
 	DP(NETIF_MSG_HW, "done\n");
 
@@ -5089,11 +5145,6 @@ static int bnx2x_init_common(struct bnx2x *bp)
 	REG_WR(bp, PXP2_REG_RD_CDURD_SWAP_MODE, 1);
 #endif
 
-#ifndef BCM_ISCSI
-		/* set NIC mode */
-		REG_WR(bp, PRS_REG_NIC_MODE, 1);
-#endif
-
 	REG_WR(bp, PXP2_REG_RQ_CDU_P_SIZE, 2);
 #ifdef BCM_ISCSI
 	REG_WR(bp, PXP2_REG_RQ_TM_P_SIZE, 5);
@@ -5163,6 +5214,8 @@ static int bnx2x_init_common(struct bnx2x *bp)
 	}
 
 	bnx2x_init_block(bp, PRS_COMMON_START, PRS_COMMON_END);
+	/* set NIC mode */
+	REG_WR(bp, PRS_REG_NIC_MODE, 1);
 	if (CHIP_IS_E1H(bp))
 		REG_WR(bp, PRS_REG_E1HOV_MODE, IS_E1HMF(bp));
 
@@ -5296,6 +5349,7 @@ static int bnx2x_init_common(struct bnx2x *bp)
 	}
 
 	switch (bp->common.board & SHARED_HW_CFG_BOARD_TYPE_MASK) {
+	case SHARED_HW_CFG_BOARD_TYPE_BCM957710A1021G:
 	case SHARED_HW_CFG_BOARD_TYPE_BCM957710A1022G:
 		/* Fan failure is indicated by SPIO 5 */
 		bnx2x_set_spio(bp, MISC_REGISTERS_SPIO_5,
@@ -5322,16 +5376,12 @@ static int bnx2x_init_common(struct bnx2x *bp)
 
 	enable_blocks_attention(bp);
 
-	if (bp->flags & TPA_ENABLE_FLAG) {
-		struct tstorm_eth_tpa_exist tmp = {0};
-
-		tmp.tpa_exist = 1;
-
-		REG_WR(bp, BAR_TSTRORM_INTMEM + TSTORM_TPA_EXIST_OFFSET,
-		       ((u32 *)&tmp)[0]);
-		REG_WR(bp, BAR_TSTRORM_INTMEM + TSTORM_TPA_EXIST_OFFSET + 4,
-		       ((u32 *)&tmp)[1]);
-	}
+	if (!BP_NOMCP(bp)) {
+		bnx2x_acquire_phy_lock(bp);
+		bnx2x_common_init_phy(bp, bp->common.shmem_base);
+		bnx2x_release_phy_lock(bp);
+	} else
+		BNX2X_ERR("Bootcode is missing - can not initialize link\n");
 
 	return 0;
 }
@@ -5483,6 +5533,7 @@ static int bnx2x_init_port(struct bnx2x *bp)
 	/* Port DMAE comes here */
 
 	switch (bp->common.board & SHARED_HW_CFG_BOARD_TYPE_MASK) {
+	case SHARED_HW_CFG_BOARD_TYPE_BCM957710A1021G:
 	case SHARED_HW_CFG_BOARD_TYPE_BCM957710A1022G:
 		/* add SPIO 5 to group 0 */
 		val = REG_RD(bp, MISC_REG_AEU_ENABLE1_FUNC_0_OUT_0);
@@ -5638,18 +5689,23 @@ static u32 bnx2x_fw_command(struct bnx2x *bp, u32 command)
 	int func = BP_FUNC(bp);
 	u32 seq = ++bp->fw_seq;
 	u32 rc = 0;
+	u32 cnt = 1;
+	u8 delay = CHIP_REV_IS_SLOW(bp) ? 100 : 10;
 
 	SHMEM_WR(bp, func_mb[func].drv_mb_header, (command | seq));
 	DP(BNX2X_MSG_MCP, "wrote command (%x) to FW MB\n", (command | seq));
 
-	/* let the FW do it's magic ... */
-	msleep(100); /* TBD */
+	do {
+		/* let the FW do it's magic ... */
+		msleep(delay);
 
-	if (CHIP_REV_IS_SLOW(bp))
-		msleep(900);
+		rc = SHMEM_RD(bp, func_mb[func].fw_mb_header);
 
-	rc = SHMEM_RD(bp, func_mb[func].fw_mb_header);
-	DP(BNX2X_MSG_MCP, "read (%x) seq is (%x) from FW MB\n", rc, seq);
+		/* Give the FW up to 2 second (200*10ms) */
+	} while ((seq != (rc & FW_MSG_SEQ_NUMBER_MASK)) && (cnt++ < 200));
+
+	DP(BNX2X_MSG_MCP, "[after %d ms] read (%x) seq is (%x) from FW MB\n",
+	   cnt*delay, rc, seq);
 
 	/* is this a reply to our command? */
 	if (seq == (rc & FW_MSG_SEQ_NUMBER_MASK)) {
@@ -5713,6 +5769,7 @@ static void bnx2x_free_mem(struct bnx2x *bp)
 			       NUM_RCQ_BD);
 
 		/* SGE ring */
+		BNX2X_FREE(bnx2x_fp(bp, i, rx_page_ring));
 		BNX2X_PCI_FREE(bnx2x_fp(bp, i, rx_sge_ring),
 			       bnx2x_fp(bp, i, rx_sge_mapping),
 			       BCM_PAGE_SIZE * NUM_RX_SGE_PAGES);
@@ -5883,14 +5940,15 @@ static void bnx2x_free_rx_skbs(struct bnx2x *bp)
 
 			pci_unmap_single(bp->pdev,
 					 pci_unmap_addr(rx_buf, mapping),
-					 bp->rx_buf_use_size,
+					 bp->rx_buf_size,
 					 PCI_DMA_FROMDEVICE);
 
 			rx_buf->skb = NULL;
 			dev_kfree_skb(skb);
 		}
 		if (!fp->disable_tpa)
-			bnx2x_free_tpa_pool(bp, fp,
+			bnx2x_free_tpa_pool(bp, fp, CHIP_IS_E1(bp) ?
+					    ETH_MAX_AGGREGATION_QUEUES_E1 :
 					    ETH_MAX_AGGREGATION_QUEUES_E1H);
 	}
 }
@@ -5976,8 +6034,8 @@ static int bnx2x_req_msix_irqs(struct bnx2x *bp)
 				 bnx2x_msix_fp_int, 0,
 				 bp->dev->name, &bp->fp[i]);
 		if (rc) {
-			BNX2X_ERR("request fp #%d irq failed  rc %d\n",
-				  i + offset, rc);
+			BNX2X_ERR("request fp #%d irq failed  rc -%d\n",
+				  i + offset, -rc);
 			bnx2x_free_msix_irqs(bp);
 			return -EBUSY;
 		}
@@ -6000,11 +6058,49 @@ static int bnx2x_req_irq(struct bnx2x *bp)
 	return rc;
 }
 
+static void bnx2x_napi_enable(struct bnx2x *bp)
+{
+	int i;
+
+	for_each_queue(bp, i)
+		napi_enable(&bnx2x_fp(bp, i, napi));
+}
+
+static void bnx2x_napi_disable(struct bnx2x *bp)
+{
+	int i;
+
+	for_each_queue(bp, i)
+		napi_disable(&bnx2x_fp(bp, i, napi));
+}
+
+static void bnx2x_netif_start(struct bnx2x *bp)
+{
+	if (atomic_dec_and_test(&bp->intr_sem)) {
+		if (netif_running(bp->dev)) {
+			if (bp->state == BNX2X_STATE_OPEN)
+				netif_wake_queue(bp->dev);
+			bnx2x_napi_enable(bp);
+			bnx2x_int_enable(bp);
+		}
+	}
+}
+
+static void bnx2x_netif_stop(struct bnx2x *bp)
+{
+	bnx2x_int_disable_sync(bp);
+	if (netif_running(bp->dev)) {
+		bnx2x_napi_disable(bp);
+		netif_tx_disable(bp->dev);
+		bp->dev->trans_start = jiffies;	/* prevent tx timeout */
+	}
+}
+
 /*
  * Init service functions
  */
 
-static void bnx2x_set_mac_addr_e1(struct bnx2x *bp)
+static void bnx2x_set_mac_addr_e1(struct bnx2x *bp, int set)
 {
 	struct mac_configuration_cmd *config = bnx2x_sp(bp, mac_config);
 	int port = BP_PORT(bp);
@@ -6026,11 +6122,15 @@ static void bnx2x_set_mac_addr_e1(struct bnx2x *bp)
 	config->config_table[0].cam_entry.lsb_mac_addr =
 					swab16(*(u16 *)&bp->dev->dev_addr[4]);
 	config->config_table[0].cam_entry.flags = cpu_to_le16(port);
-	config->config_table[0].target_table_entry.flags = 0;
+	if (set)
+		config->config_table[0].target_table_entry.flags = 0;
+	else
+		CAM_INVALIDATE(config->config_table[0]);
 	config->config_table[0].target_table_entry.client_id = 0;
 	config->config_table[0].target_table_entry.vlan_id = 0;
 
-	DP(NETIF_MSG_IFUP, "setting MAC (%04x:%04x:%04x)\n",
+	DP(NETIF_MSG_IFUP, "%s MAC (%04x:%04x:%04x)\n",
+	   (set ? "setting" : "clearing"),
 	   config->config_table[0].cam_entry.msb_mac_addr,
 	   config->config_table[0].cam_entry.middle_mac_addr,
 	   config->config_table[0].cam_entry.lsb_mac_addr);
@@ -6040,8 +6140,11 @@ static void bnx2x_set_mac_addr_e1(struct bnx2x *bp)
 	config->config_table[1].cam_entry.middle_mac_addr = 0xffff;
 	config->config_table[1].cam_entry.lsb_mac_addr = 0xffff;
 	config->config_table[1].cam_entry.flags = cpu_to_le16(port);
-	config->config_table[1].target_table_entry.flags =
+	if (set)
+		config->config_table[1].target_table_entry.flags =
 				TSTORM_CAM_TARGET_TABLE_ENTRY_BROADCAST;
+	else
+		CAM_INVALIDATE(config->config_table[1]);
 	config->config_table[1].target_table_entry.client_id = 0;
 	config->config_table[1].target_table_entry.vlan_id = 0;
 
@@ -6050,12 +6153,12 @@ static void bnx2x_set_mac_addr_e1(struct bnx2x *bp)
 		      U64_LO(bnx2x_sp_mapping(bp, mac_config)), 0);
 }
 
-static void bnx2x_set_mac_addr_e1h(struct bnx2x *bp)
+static void bnx2x_set_mac_addr_e1h(struct bnx2x *bp, int set)
 {
 	struct mac_configuration_cmd_e1h *config =
 		(struct mac_configuration_cmd_e1h *)bnx2x_sp(bp, mac_config);
 
-	if (bp->state != BNX2X_STATE_OPEN) {
+	if (set && (bp->state != BNX2X_STATE_OPEN)) {
 		DP(NETIF_MSG_IFUP, "state is %x, returning\n", bp->state);
 		return;
 	}
@@ -6079,9 +6182,14 @@ static void bnx2x_set_mac_addr_e1h(struct bnx2x *bp)
 	config->config_table[0].client_id = BP_L_ID(bp);
 	config->config_table[0].vlan_id = 0;
 	config->config_table[0].e1hov_id = cpu_to_le16(bp->e1hov);
-	config->config_table[0].flags = BP_PORT(bp);
+	if (set)
+		config->config_table[0].flags = BP_PORT(bp);
+	else
+		config->config_table[0].flags =
+				MAC_CONFIGURATION_ENTRY_E1H_ACTION_TYPE;
 
-	DP(NETIF_MSG_IFUP, "setting MAC (%04x:%04x:%04x)  E1HOV %d  CLID %d\n",
+	DP(NETIF_MSG_IFUP, "%s MAC (%04x:%04x:%04x)  E1HOV %d  CLID %d\n",
+	   (set ? "setting" : "clearing"),
 	   config->config_table[0].msb_mac_addr,
 	   config->config_table[0].middle_mac_addr,
 	   config->config_table[0].lsb_mac_addr, bp->e1hov, BP_L_ID(bp));
@@ -6106,13 +6214,13 @@ static int bnx2x_wait_ramrod(struct bnx2x *bp, int state, int idx,
 			bnx2x_rx_int(bp->fp, 10);
 			/* if index is different from 0
 			 * the reply for some commands will
-			 * be on the none default queue
+			 * be on the non default queue
 			 */
 			if (idx)
 				bnx2x_rx_int(&bp->fp[idx], 10);
 		}
-		mb(); /* state is changed by bnx2x_sp_event() */
 
+		mb(); /* state is changed by bnx2x_sp_event() */
 		if (*state_p == state)
 			return 0;
 
@@ -6167,7 +6275,6 @@ static int bnx2x_nic_load(struct bnx2x *bp, int load_mode)
 {
 	u32 load_code;
 	int i, rc;
-
 #ifdef BNX2X_STOP_ON_ERROR
 	if (unlikely(bp->panic))
 		return -EPERM;
@@ -6183,22 +6290,24 @@ static int bnx2x_nic_load(struct bnx2x *bp, int load_mode)
 	if (!BP_NOMCP(bp)) {
 		load_code = bnx2x_fw_command(bp, DRV_MSG_CODE_LOAD_REQ);
 		if (!load_code) {
-			BNX2X_ERR("MCP response failure, unloading\n");
+			BNX2X_ERR("MCP response failure, aborting\n");
 			return -EBUSY;
 		}
 		if (load_code == FW_MSG_CODE_DRV_LOAD_REFUSED)
 			return -EBUSY; /* other port in diagnostic mode */
 
 	} else {
+		int port = BP_PORT(bp);
+
 		DP(NETIF_MSG_IFUP, "NO MCP load counts before us %d, %d, %d\n",
 		   load_count[0], load_count[1], load_count[2]);
 		load_count[0]++;
-		load_count[1 + BP_PORT(bp)]++;
+		load_count[1 + port]++;
 		DP(NETIF_MSG_IFUP, "NO MCP new load counts       %d, %d, %d\n",
 		   load_count[0], load_count[1], load_count[2]);
 		if (load_count[0] == 1)
 			load_code = FW_MSG_CODE_DRV_LOAD_COMMON;
-		else if (load_count[1 + BP_PORT(bp)] == 1)
+		else if (load_count[1 + port] == 1)
 			load_code = FW_MSG_CODE_DRV_LOAD_PORT;
 		else
 			load_code = FW_MSG_CODE_DRV_LOAD_FUNCTION;
@@ -6247,9 +6356,6 @@ static int bnx2x_nic_load(struct bnx2x *bp, int load_mode)
 		bnx2x_fp(bp, i, disable_tpa) =
 					((bp->flags & TPA_ENABLE_FLAG) == 0);
 
-	/* Disable interrupt handling until HW is initialized */
-	atomic_set(&bp->intr_sem, 1);
-
 	if (bp->flags & USING_MSIX_FLAG) {
 		rc = bnx2x_req_msix_irqs(bp);
 		if (rc) {
@@ -6273,22 +6379,19 @@ static int bnx2x_nic_load(struct bnx2x *bp, int load_mode)
 	rc = bnx2x_init_hw(bp, load_code);
 	if (rc) {
 		BNX2X_ERR("HW init failed, aborting\n");
-		goto load_error;
+		goto load_int_disable;
 	}
 
-	/* Enable interrupt handling */
-	atomic_set(&bp->intr_sem, 0);
-
 	/* Setup NIC internals and enable interrupts */
-	bnx2x_nic_init(bp);
+	bnx2x_nic_init(bp, load_code);
 
 	/* Send LOAD_DONE command to MCP */
 	if (!BP_NOMCP(bp)) {
 		load_code = bnx2x_fw_command(bp, DRV_MSG_CODE_LOAD_DONE);
 		if (!load_code) {
-			BNX2X_ERR("MCP response failure, unloading\n");
+			BNX2X_ERR("MCP response failure, aborting\n");
 			rc = -EBUSY;
-			goto load_int_disable;
+			goto load_rings_free;
 		}
 	}
 
@@ -6298,15 +6401,15 @@ static int bnx2x_nic_load(struct bnx2x *bp, int load_mode)
 
 	/* Enable Rx interrupt handling before sending the ramrod
 	   as it's completed on Rx FP queue */
-	for_each_queue(bp, i)
-		napi_enable(&bnx2x_fp(bp, i, napi));
+	bnx2x_napi_enable(bp);
+
+	/* Enable interrupt handling */
+	atomic_set(&bp->intr_sem, 0);
 
 	rc = bnx2x_setup_leading(bp);
 	if (rc) {
-#ifdef BNX2X_STOP_ON_ERROR
-		bp->panic = 1;
-#endif
-		goto load_stop_netif;
+		BNX2X_ERR("Setup leading failed!\n");
+		goto load_netif_stop;
 	}
 
 	if (CHIP_IS_E1H(bp))
@@ -6319,13 +6422,13 @@ static int bnx2x_nic_load(struct bnx2x *bp, int load_mode)
 		for_each_nondefault_queue(bp, i) {
 			rc = bnx2x_setup_multi(bp, i);
 			if (rc)
-				goto load_stop_netif;
+				goto load_netif_stop;
 		}
 
 	if (CHIP_IS_E1(bp))
-		bnx2x_set_mac_addr_e1(bp);
+		bnx2x_set_mac_addr_e1(bp, 1);
 	else
-		bnx2x_set_mac_addr_e1h(bp);
+		bnx2x_set_mac_addr_e1h(bp, 1);
 
 	if (bp->port.pmf)
 		bnx2x_initial_phy_init(bp);
@@ -6339,7 +6442,6 @@ static int bnx2x_nic_load(struct bnx2x *bp, int load_mode)
 		break;
 
 	case LOAD_OPEN:
-		/* IRQ is only requested from bnx2x_open */
 		netif_start_queue(bp->dev);
 		bnx2x_set_rx_mode(bp->dev);
 		if (bp->flags & USING_MSIX_FLAG)
@@ -6365,21 +6467,17 @@ static int bnx2x_nic_load(struct bnx2x *bp, int load_mode)
 
 	return 0;
 
-load_stop_netif:
+load_netif_stop:
+	bnx2x_napi_disable(bp);
+load_rings_free:
+	/* Free SKBs, SGEs, TPA pool and driver internals */
+	bnx2x_free_skbs(bp);
 	for_each_queue(bp, i)
-		napi_disable(&bnx2x_fp(bp, i, napi));
-
+		bnx2x_free_rx_sge_range(bp, bp->fp + i, NUM_RX_SGE);
 load_int_disable:
 	bnx2x_int_disable_sync(bp);
-
 	/* Release IRQs */
 	bnx2x_free_irq(bp);
-
-	/* Free SKBs, SGEs, TPA pool and driver internals */
-	bnx2x_free_skbs(bp);
-	for_each_queue(bp, i)
-		bnx2x_free_rx_sge_range(bp, bp->fp + i,
-					RX_SGE_CNT*NUM_RX_SGE_PAGES);
 load_error:
 	bnx2x_free_mem(bp);
 
@@ -6394,7 +6492,7 @@ static int bnx2x_stop_multi(struct bnx2x *bp, int index)
 
 	/* halt the connection */
 	bp->fp[index].state = BNX2X_FP_STATE_HALTING;
-	bnx2x_sp_post(bp, RAMROD_CMD_ID_ETH_HALT, index, 0, 0, 0);
+	bnx2x_sp_post(bp, RAMROD_CMD_ID_ETH_HALT, index, 0, index, 0);
 
 	/* Wait for completion */
 	rc = bnx2x_wait_ramrod(bp, BNX2X_FP_STATE_HALTED, index,
@@ -6411,7 +6509,7 @@ static int bnx2x_stop_multi(struct bnx2x *bp, int index)
 	return rc;
 }
 
-static void bnx2x_stop_leading(struct bnx2x *bp)
+static int bnx2x_stop_leading(struct bnx2x *bp)
 {
 	u16 dsb_sp_prod_idx;
 	/* if the other port is handling traffic,
@@ -6429,7 +6527,7 @@ static void bnx2x_stop_leading(struct bnx2x *bp)
 	rc = bnx2x_wait_ramrod(bp, BNX2X_FP_STATE_HALTED, 0,
 			       &(bp->fp[0].state), 1);
 	if (rc) /* timeout */
-		return;
+		return rc;
 
 	dsb_sp_prod_idx = *bp->dsb_sp_prod;
 
@@ -6441,20 +6539,24 @@ static void bnx2x_stop_leading(struct bnx2x *bp)
 	   so there is not much to do if this times out
 	 */
 	while (dsb_sp_prod_idx == *bp->dsb_sp_prod) {
-		msleep(1);
 		if (!cnt) {
 			DP(NETIF_MSG_IFDOWN, "timeout waiting for port del "
 			   "dsb_sp_prod 0x%x != dsb_sp_prod_idx 0x%x\n",
 			   *bp->dsb_sp_prod, dsb_sp_prod_idx);
 #ifdef BNX2X_STOP_ON_ERROR
 			bnx2x_panic();
+#else
+			rc = -EBUSY;
 #endif
 			break;
 		}
 		cnt--;
+		msleep(1);
 	}
 	bp->state = BNX2X_STATE_CLOSING_WAIT4_UNLOAD;
 	bp->fp[0].state = BNX2X_FP_STATE_CLOSED;
+
+	return rc;
 }
 
 static void bnx2x_reset_func(struct bnx2x *bp)
@@ -6496,7 +6598,7 @@ static void bnx2x_reset_port(struct bnx2x *bp)
 	val = REG_RD(bp, BRB1_REG_PORT_NUM_OCC_BLOCKS_0 + port*4);
 	if (val)
 		DP(NETIF_MSG_IFDOWN,
-		   "BRB1 is not empty  %d blooks are occupied\n", val);
+		   "BRB1 is not empty  %d blocks are occupied\n", val);
 
 	/* TODO: Close Doorbell port? */
 }
@@ -6536,43 +6638,35 @@ static void bnx2x_reset_chip(struct bnx2x *bp, u32 reset_code)
 	}
 }
 
-/* msut be called with rtnl_lock */
+/* must be called with rtnl_lock */
 static int bnx2x_nic_unload(struct bnx2x *bp, int unload_mode)
 {
+	int port = BP_PORT(bp);
 	u32 reset_code = 0;
-	int i, cnt;
+	int i, cnt, rc;
 
 	bp->state = BNX2X_STATE_CLOSING_WAIT4_HALT;
 
 	bp->rx_mode = BNX2X_RX_MODE_NONE;
 	bnx2x_set_storm_rx_mode(bp);
 
-	if (netif_running(bp->dev)) {
-		netif_tx_disable(bp->dev);
-		bp->dev->trans_start = jiffies;	/* prevent tx timeout */
-	}
-
+	bnx2x_netif_stop(bp);
+	if (!netif_running(bp->dev))
+		bnx2x_napi_disable(bp);
 	del_timer_sync(&bp->timer);
 	SHMEM_WR(bp, func_mb[BP_FUNC(bp)].drv_pulse_mb,
 		 (DRV_PULSE_ALWAYS_ALIVE | bp->fw_drv_pulse_wr_seq));
 	bnx2x_stats_handle(bp, STATS_EVENT_STOP);
 
-	/* Wait until all fast path tasks complete */
+	/* Wait until tx fast path tasks complete */
 	for_each_queue(bp, i) {
 		struct bnx2x_fastpath *fp = &bp->fp[i];
 
-#ifdef BNX2X_STOP_ON_ERROR
-#ifdef __powerpc64__
-		DP(NETIF_MSG_RX_STATUS, "fp->tpa_queue_used = 0x%lx\n",
-#else
-		DP(NETIF_MSG_IFDOWN, "fp->tpa_queue_used = 0x%llx\n",
-#endif
-		   fp->tpa_queue_used);
-#endif
 		cnt = 1000;
 		smp_rmb();
-		while (bnx2x_has_work(fp)) {
-			msleep(1);
+		while (BNX2X_HAS_TX_WORK(fp)) {
+
+			bnx2x_tx_int(fp, 1000);
 			if (!cnt) {
 				BNX2X_ERR("timeout waiting for queue[%d]\n",
 					  i);
@@ -6584,40 +6678,68 @@ static int bnx2x_nic_unload(struct bnx2x *bp, int unload_mode)
 #endif
 			}
 			cnt--;
+			msleep(1);
 			smp_rmb();
 		}
 	}
-
-	/* Wait until all slow path tasks complete */
-	cnt = 1000;
-	while ((bp->spq_left != MAX_SPQ_PENDING) && cnt--)
-		msleep(1);
-
-	for_each_queue(bp, i)
-		napi_disable(&bnx2x_fp(bp, i, napi));
-	/* Disable interrupts after Tx and Rx are disabled on stack level */
-	bnx2x_int_disable_sync(bp);
+	/* Give HW time to discard old tx messages */
+	msleep(1);
 
 	/* Release IRQs */
 	bnx2x_free_irq(bp);
 
-	if (bp->flags & NO_WOL_FLAG)
+	if (CHIP_IS_E1(bp)) {
+		struct mac_configuration_cmd *config =
+						bnx2x_sp(bp, mcast_config);
+
+		bnx2x_set_mac_addr_e1(bp, 0);
+
+		for (i = 0; i < config->hdr.length_6b; i++)
+			CAM_INVALIDATE(config->config_table[i]);
+
+		config->hdr.length_6b = i;
+		if (CHIP_REV_IS_SLOW(bp))
+			config->hdr.offset = BNX2X_MAX_EMUL_MULTI*(1 + port);
+		else
+			config->hdr.offset = BNX2X_MAX_MULTICAST*(1 + port);
+		config->hdr.client_id = BP_CL_ID(bp);
+		config->hdr.reserved1 = 0;
+
+		bnx2x_sp_post(bp, RAMROD_CMD_ID_ETH_SET_MAC, 0,
+			      U64_HI(bnx2x_sp_mapping(bp, mcast_config)),
+			      U64_LO(bnx2x_sp_mapping(bp, mcast_config)), 0);
+
+	} else { /* E1H */
+		REG_WR(bp, NIG_REG_LLH0_FUNC_EN + port*8, 0);
+
+		bnx2x_set_mac_addr_e1h(bp, 0);
+
+		for (i = 0; i < MC_HASH_SIZE; i++)
+			REG_WR(bp, MC_HASH_OFFSET(bp, i), 0);
+	}
+
+	if (unload_mode == UNLOAD_NORMAL)
+		reset_code = DRV_MSG_CODE_UNLOAD_REQ_WOL_DIS;
+
+	else if (bp->flags & NO_WOL_FLAG) {
 		reset_code = DRV_MSG_CODE_UNLOAD_REQ_WOL_MCP;
+		if (CHIP_IS_E1H(bp))
+			REG_WR(bp, MISC_REG_E1HMF_MODE, 0);
 
-	else if (bp->wol) {
-		u32 emac_base = BP_PORT(bp) ? GRCBASE_EMAC1 : GRCBASE_EMAC0;
+	} else if (bp->wol) {
+		u32 emac_base = port ? GRCBASE_EMAC1 : GRCBASE_EMAC0;
 		u8 *mac_addr = bp->dev->dev_addr;
 		u32 val;
-
 		/* The mac address is written to entries 1-4 to
 		   preserve entry 0 which is used by the PMF */
+		u8 entry = (BP_E1HVN(bp) + 1)*8;
+
 		val = (mac_addr[0] << 8) | mac_addr[1];
-		EMAC_WR(EMAC_REG_EMAC_MAC_MATCH + (BP_E1HVN(bp) + 1)*8, val);
+		EMAC_WR(bp, EMAC_REG_EMAC_MAC_MATCH + entry, val);
 
 		val = (mac_addr[2] << 24) | (mac_addr[3] << 16) |
 		      (mac_addr[4] << 8) | mac_addr[5];
-		EMAC_WR(EMAC_REG_EMAC_MAC_MATCH + (BP_E1HVN(bp) + 1)*8 + 4,
-			val);
+		EMAC_WR(bp, EMAC_REG_EMAC_MAC_MATCH + entry + 4, val);
 
 		reset_code = DRV_MSG_CODE_UNLOAD_REQ_WOL_EN;
 
@@ -6630,23 +6752,14 @@ static int bnx2x_nic_unload(struct bnx2x *bp, int unload_mode)
 		if (bnx2x_stop_multi(bp, i))
 			goto unload_error;
 
-	if (CHIP_IS_E1H(bp))
-		REG_WR(bp, NIG_REG_LLH0_FUNC_EN + BP_PORT(bp)*8, 0);
-
-	bnx2x_stop_leading(bp);
-#ifdef BNX2X_STOP_ON_ERROR
-	/* If ramrod completion timed out - break here! */
-	if (bp->panic) {
+	rc = bnx2x_stop_leading(bp);
+	if (rc) {
 		BNX2X_ERR("Stop leading failed!\n");
+#ifdef BNX2X_STOP_ON_ERROR
 		return -EBUSY;
-	}
+#else
+		goto unload_error;
 #endif
-
-	if ((bp->state != BNX2X_STATE_CLOSING_WAIT4_UNLOAD) ||
-	    (bp->fp[0].state != BNX2X_FP_STATE_CLOSED)) {
-		DP(NETIF_MSG_IFDOWN, "failed to close leading properly!  "
-		   "state 0x%x  fp[0].state 0x%x\n",
-		   bp->state, bp->fp[0].state);
 	}
 
 unload_error:
@@ -6656,12 +6769,12 @@ unload_error:
 		DP(NETIF_MSG_IFDOWN, "NO MCP load counts      %d, %d, %d\n",
 		   load_count[0], load_count[1], load_count[2]);
 		load_count[0]--;
-		load_count[1 + BP_PORT(bp)]--;
+		load_count[1 + port]--;
 		DP(NETIF_MSG_IFDOWN, "NO MCP new load counts  %d, %d, %d\n",
 		   load_count[0], load_count[1], load_count[2]);
 		if (load_count[0] == 0)
 			reset_code = FW_MSG_CODE_DRV_UNLOAD_COMMON;
-		else if (load_count[1 + BP_PORT(bp)] == 0)
+		else if (load_count[1 + port] == 0)
 			reset_code = FW_MSG_CODE_DRV_UNLOAD_PORT;
 		else
 			reset_code = FW_MSG_CODE_DRV_UNLOAD_FUNCTION;
@@ -6681,8 +6794,7 @@ unload_error:
 	/* Free SKBs, SGEs, TPA pool and driver internals */
 	bnx2x_free_skbs(bp);
 	for_each_queue(bp, i)
-		bnx2x_free_rx_sge_range(bp, bp->fp + i,
-					RX_SGE_CNT*NUM_RX_SGE_PAGES);
+		bnx2x_free_rx_sge_range(bp, bp->fp + i, NUM_RX_SGE);
 	bnx2x_free_mem(bp);
 
 	bp->state = BNX2X_STATE_CLOSED;
@@ -6733,49 +6845,88 @@ static void __devinit bnx2x_undi_unload(struct bnx2x *bp)
 		/* Check if it is the UNDI driver
 		 * UNDI driver initializes CID offset for normal bell to 0x7
 		 */
+		bnx2x_acquire_hw_lock(bp, HW_LOCK_RESOURCE_UNDI);
 		val = REG_RD(bp, DORQ_REG_NORM_CID_OFST);
+		if (val == 0x7)
+			REG_WR(bp, DORQ_REG_NORM_CID_OFST, 0);
+		bnx2x_release_hw_lock(bp, HW_LOCK_RESOURCE_UNDI);
+
 		if (val == 0x7) {
 			u32 reset_code = DRV_MSG_CODE_UNLOAD_REQ_WOL_DIS;
-			/* save our func and fw_seq */
+			/* save our func */
 			int func = BP_FUNC(bp);
-			u16 fw_seq = bp->fw_seq;
+			u32 swap_en;
+			u32 swap_val;
 
 			BNX2X_DEV_INFO("UNDI is active! reset device\n");
 
 			/* try unload UNDI on port 0 */
 			bp->func = 0;
-			bp->fw_seq = (SHMEM_RD(bp,
-					     func_mb[bp->func].drv_mb_header) &
-				      DRV_MSG_SEQ_NUMBER_MASK);
-
+			bp->fw_seq =
+			       (SHMEM_RD(bp, func_mb[bp->func].drv_mb_header) &
+				DRV_MSG_SEQ_NUMBER_MASK);
 			reset_code = bnx2x_fw_command(bp, reset_code);
-			bnx2x_fw_command(bp, DRV_MSG_CODE_UNLOAD_DONE);
 
 			/* if UNDI is loaded on the other port */
 			if (reset_code != FW_MSG_CODE_DRV_UNLOAD_COMMON) {
 
+				/* send "DONE" for previous unload */
+				bnx2x_fw_command(bp, DRV_MSG_CODE_UNLOAD_DONE);
+
+				/* unload UNDI on port 1 */
 				bp->func = 1;
-				bp->fw_seq = (SHMEM_RD(bp,
-					     func_mb[bp->func].drv_mb_header) &
-					      DRV_MSG_SEQ_NUMBER_MASK);
-
-				bnx2x_fw_command(bp,
-					     DRV_MSG_CODE_UNLOAD_REQ_WOL_DIS);
-				bnx2x_fw_command(bp,
-						 DRV_MSG_CODE_UNLOAD_DONE);
-
-				/* restore our func and fw_seq */
-				bp->func = func;
-				bp->fw_seq = fw_seq;
+				bp->fw_seq =
+			       (SHMEM_RD(bp, func_mb[bp->func].drv_mb_header) &
+					DRV_MSG_SEQ_NUMBER_MASK);
+				reset_code = DRV_MSG_CODE_UNLOAD_REQ_WOL_DIS;
+
+				bnx2x_fw_command(bp, reset_code);
 			}
 
+			REG_WR(bp, (BP_PORT(bp) ? HC_REG_CONFIG_1 :
+				    HC_REG_CONFIG_0), 0x1000);
+
+			/* close input traffic and wait for it */
+			/* Do not rcv packets to BRB */
+			REG_WR(bp,
+			      (BP_PORT(bp) ? NIG_REG_LLH1_BRB1_DRV_MASK :
+					     NIG_REG_LLH0_BRB1_DRV_MASK), 0x0);
+			/* Do not direct rcv packets that are not for MCP to
+			 * the BRB */
+			REG_WR(bp,
+			       (BP_PORT(bp) ? NIG_REG_LLH1_BRB1_NOT_MCP :
+					      NIG_REG_LLH0_BRB1_NOT_MCP), 0x0);
+			/* clear AEU */
+			REG_WR(bp,
+			     (BP_PORT(bp) ? MISC_REG_AEU_MASK_ATTN_FUNC_1 :
+					    MISC_REG_AEU_MASK_ATTN_FUNC_0), 0);
+			msleep(10);
+
+			/* save NIG port swap info */
+			swap_val = REG_RD(bp, NIG_REG_PORT_SWAP);
+			swap_en = REG_RD(bp, NIG_REG_STRAP_OVERRIDE);
 			/* reset device */
 			REG_WR(bp,
 			       GRCBASE_MISC + MISC_REGISTERS_RESET_REG_1_CLEAR,
-			       0xd3ffff7f);
+			       0xd3ffffff);
 			REG_WR(bp,
 			       GRCBASE_MISC + MISC_REGISTERS_RESET_REG_2_CLEAR,
 			       0x1403);
+			/* take the NIG out of reset and restore swap values */
+			REG_WR(bp,
+			       GRCBASE_MISC + MISC_REGISTERS_RESET_REG_1_SET,
+			       MISC_REGISTERS_RESET_REG_1_RST_NIG);
+			REG_WR(bp, NIG_REG_PORT_SWAP, swap_val);
+			REG_WR(bp, NIG_REG_STRAP_OVERRIDE, swap_en);
+
+			/* send unload done to the MCP */
+			bnx2x_fw_command(bp, DRV_MSG_CODE_UNLOAD_DONE);
+
+			/* restore our func and fw_seq */
+			bp->func = func;
+			bp->fw_seq =
+			       (SHMEM_RD(bp, func_mb[bp->func].drv_mb_header) &
+				DRV_MSG_SEQ_NUMBER_MASK);
 		}
 	}
 }
@@ -6783,6 +6934,7 @@ static void __devinit bnx2x_undi_unload(struct bnx2x *bp)
 static void __devinit bnx2x_get_common_hwinfo(struct bnx2x *bp)
 {
 	u32 val, val2, val3, val4, id;
+	u16 pmc;
 
 	/* Get the chip revision id and number. */
 	/* chip num:16-31, rev:12-15, metal:4-11, bond_id:0-3 */
@@ -6840,8 +6992,16 @@ static void __devinit bnx2x_get_common_hwinfo(struct bnx2x *bp)
 		BNX2X_ERR("This driver needs bc_ver %X but found %X,"
 			  " please upgrade BC\n", BNX2X_BC_VER, val);
 	}
-	BNX2X_DEV_INFO("%sWoL Capable\n",
-		       (bp->flags & NO_WOL_FLAG)? "Not " : "");
+
+	if (BP_E1HVN(bp) == 0) {
+		pci_read_config_word(bp->pdev, bp->pm_cap + PCI_PM_PMC, &pmc);
+		bp->flags |= (pmc & PCI_PM_CAP_PME_D3cold) ? 0 : NO_WOL_FLAG;
+	} else {
+		/* no WOL capability for E1HVN != 0 */
+		bp->flags |= NO_WOL_FLAG;
+	}
+	BNX2X_DEV_INFO("%sWoL capable\n",
+		       (bp->flags & NO_WOL_FLAG) ? "Not " : "");
 
 	val = SHMEM_RD(bp, dev_info.shared_hw_config.part_num);
 	val2 = SHMEM_RD(bp, dev_info.shared_hw_config.part_num[4]);
@@ -7202,7 +7362,7 @@ static void __devinit bnx2x_link_settings_requested(struct bnx2x *bp)
 	bp->link_params.req_flow_ctrl = (bp->port.link_config &
 					 PORT_FEATURE_FLOW_CONTROL_MASK);
 	if ((bp->link_params.req_flow_ctrl == FLOW_CTRL_AUTO) &&
-	    (!bp->port.supported & SUPPORTED_Autoneg))
+	    !(bp->port.supported & SUPPORTED_Autoneg))
 		bp->link_params.req_flow_ctrl = FLOW_CTRL_NONE;
 
 	BNX2X_DEV_INFO("req_line_speed %d  req_duplex %d  req_flow_ctrl 0x%x"
@@ -7274,9 +7434,8 @@ static int __devinit bnx2x_get_hwinfo(struct bnx2x *bp)
 		bp->mf_config =
 			SHMEM_RD(bp, mf_cfg.func_mf_config[func].config);
 
-		val =
-		   (SHMEM_RD(bp, mf_cfg.func_mf_config[func].e1hov_tag) &
-		    FUNC_MF_CFG_E1HOV_TAG_MASK);
+		val = (SHMEM_RD(bp, mf_cfg.func_mf_config[func].e1hov_tag) &
+		       FUNC_MF_CFG_E1HOV_TAG_MASK);
 		if (val != FUNC_MF_CFG_E1HOV_TAG_DEFAULT) {
 
 			bp->e1hov = val;
@@ -7324,7 +7483,7 @@ static int __devinit bnx2x_get_hwinfo(struct bnx2x *bp)
 
 	if (BP_NOMCP(bp)) {
 		/* only supposed to happen on emulation/FPGA */
-		BNX2X_ERR("warning rendom MAC workaround active\n");
+		BNX2X_ERR("warning random MAC workaround active\n");
 		random_ether_addr(bp->dev->dev_addr);
 		memcpy(bp->dev->perm_addr, bp->dev->dev_addr, ETH_ALEN);
 	}
@@ -7337,8 +7496,8 @@ static int __devinit bnx2x_init_bp(struct bnx2x *bp)
 	int func = BP_FUNC(bp);
 	int rc;
 
-	if (nomcp)
-		bp->flags |= NO_MCP_FLAG;
+	/* Disable interrupt handling until HW is initialized */
+	atomic_set(&bp->intr_sem, 1);
 
 	mutex_init(&bp->port.phy_mutex);
 
@@ -7377,8 +7536,6 @@ static int __devinit bnx2x_init_bp(struct bnx2x *bp)
 	bp->tx_ticks = 50;
 	bp->rx_ticks = 25;
 
-	bp->stats_ticks = 1000000 & 0xffff00;
-
 	bp->timer_interval = (CHIP_REV_IS_SLOW(bp) ? 5*HZ : HZ);
 	bp->current_interval = (poll ? poll : bp->timer_interval);
 
@@ -7628,25 +7785,25 @@ static void bnx2x_get_drvinfo(struct net_device *dev,
 			      struct ethtool_drvinfo *info)
 {
 	struct bnx2x *bp = netdev_priv(dev);
-	char phy_fw_ver[PHY_FW_VER_LEN];
+	u8 phy_fw_ver[PHY_FW_VER_LEN];
 
 	strcpy(info->driver, DRV_MODULE_NAME);
 	strcpy(info->version, DRV_MODULE_VERSION);
 
 	phy_fw_ver[0] = '\0';
 	if (bp->port.pmf) {
-		bnx2x_phy_hw_lock(bp);
+		bnx2x_acquire_phy_lock(bp);
 		bnx2x_get_ext_phy_fw_version(&bp->link_params,
 					     (bp->state != BNX2X_STATE_CLOSED),
 					     phy_fw_ver, PHY_FW_VER_LEN);
-		bnx2x_phy_hw_unlock(bp);
+		bnx2x_release_phy_lock(bp);
 	}
 
-	snprintf(info->fw_version, 32, "%d.%d.%d:%d BC:%x%s%s",
-		 BCM_5710_FW_MAJOR_VERSION, BCM_5710_FW_MINOR_VERSION,
-		 BCM_5710_FW_REVISION_VERSION,
-		 BCM_5710_FW_COMPILE_FLAGS, bp->common.bc_ver,
-		 ((phy_fw_ver[0] != '\0')? " PHY:":""), phy_fw_ver);
+	snprintf(info->fw_version, 32, "BC:%d.%d.%d%s%s",
+		 (bp->common.bc_ver & 0xff0000) >> 16,
+		 (bp->common.bc_ver & 0xff00) >> 8,
+		 (bp->common.bc_ver & 0xff),
+		 ((phy_fw_ver[0] != '\0') ? " PHY:" : ""), phy_fw_ver);
 	strcpy(info->bus_info, pci_name(bp->pdev));
 	info->n_stats = BNX2X_NUM_STATS;
 	info->testinfo_len = BNX2X_NUM_TESTS;
@@ -8097,7 +8254,7 @@ static int bnx2x_set_eeprom(struct net_device *dev,
 	if (eeprom->magic == 0x00504859)
 		if (bp->port.pmf) {
 
-			bnx2x_phy_hw_lock(bp);
+			bnx2x_acquire_phy_lock(bp);
 			rc = bnx2x_flash_download(bp, BP_PORT(bp),
 					     bp->link_params.ext_phy_config,
 					     (bp->state != BNX2X_STATE_CLOSED),
@@ -8109,7 +8266,7 @@ static int bnx2x_set_eeprom(struct net_device *dev,
 				rc |= bnx2x_phy_init(&bp->link_params,
 						     &bp->link_vars);
 			}
-			bnx2x_phy_hw_unlock(bp);
+			bnx2x_release_phy_lock(bp);
 
 		} else /* Only the PMF can access the PHY */
 			return -EINVAL;
@@ -8128,7 +8285,6 @@ static int bnx2x_get_coalesce(struct net_device *dev,
 
 	coal->rx_coalesce_usecs = bp->rx_ticks;
 	coal->tx_coalesce_usecs = bp->tx_ticks;
-	coal->stats_block_coalesce_usecs = bp->stats_ticks;
 
 	return 0;
 }
@@ -8146,44 +8302,12 @@ static int bnx2x_set_coalesce(struct net_device *dev,
 	if (bp->tx_ticks > 0x3000)
 		bp->tx_ticks = 0x3000;
 
-	bp->stats_ticks = coal->stats_block_coalesce_usecs;
-	if (bp->stats_ticks > 0xffff00)
-		bp->stats_ticks = 0xffff00;
-	bp->stats_ticks &= 0xffff00;
-
 	if (netif_running(dev))
 		bnx2x_update_coalesce(bp);
 
 	return 0;
 }
 
-static int bnx2x_set_flags(struct net_device *dev, u32 data)
-{
-	struct bnx2x *bp = netdev_priv(dev);
-	int changed = 0;
-	int rc = 0;
-
-	if (data & ETH_FLAG_LRO) {
-		if (!(dev->features & NETIF_F_LRO)) {
-			dev->features |= NETIF_F_LRO;
-			bp->flags |= TPA_ENABLE_FLAG;
-			changed = 1;
-		}
-
-	} else if (dev->features & NETIF_F_LRO) {
-		dev->features &= ~NETIF_F_LRO;
-		bp->flags &= ~TPA_ENABLE_FLAG;
-		changed = 1;
-	}
-
-	if (changed && netif_running(dev)) {
-		bnx2x_nic_unload(bp, UNLOAD_NORMAL);
-		rc = bnx2x_nic_load(bp, LOAD_NORMAL);
-	}
-
-	return rc;
-}
-
 static void bnx2x_get_ringparam(struct net_device *dev,
 				struct ethtool_ringparam *ering)
 {
@@ -8266,7 +8390,7 @@ static int bnx2x_set_pauseparam(struct net_device *dev,
 
 	if (epause->autoneg) {
 		if (!(bp->port.supported & SUPPORTED_Autoneg)) {
-			DP(NETIF_MSG_LINK, "Autoneg not supported\n");
+			DP(NETIF_MSG_LINK, "autoneg not supported\n");
 			return -EINVAL;
 		}
 
@@ -8285,6 +8409,34 @@ static int bnx2x_set_pauseparam(struct net_device *dev,
 	return 0;
 }
 
+static int bnx2x_set_flags(struct net_device *dev, u32 data)
+{
+	struct bnx2x *bp = netdev_priv(dev);
+	int changed = 0;
+	int rc = 0;
+
+	/* TPA requires Rx CSUM offloading */
+	if ((data & ETH_FLAG_LRO) && bp->rx_csum) {
+		if (!(dev->features & NETIF_F_LRO)) {
+			dev->features |= NETIF_F_LRO;
+			bp->flags |= TPA_ENABLE_FLAG;
+			changed = 1;
+		}
+
+	} else if (dev->features & NETIF_F_LRO) {
+		dev->features &= ~NETIF_F_LRO;
+		bp->flags &= ~TPA_ENABLE_FLAG;
+		changed = 1;
+	}
+
+	if (changed && netif_running(dev)) {
+		bnx2x_nic_unload(bp, UNLOAD_NORMAL);
+		rc = bnx2x_nic_load(bp, LOAD_NORMAL);
+	}
+
+	return rc;
+}
+
 static u32 bnx2x_get_rx_csum(struct net_device *dev)
 {
 	struct bnx2x *bp = netdev_priv(dev);
@@ -8295,9 +8447,19 @@ static u32 bnx2x_get_rx_csum(struct net_device *dev)
 static int bnx2x_set_rx_csum(struct net_device *dev, u32 data)
 {
 	struct bnx2x *bp = netdev_priv(dev);
+	int rc = 0;
 
 	bp->rx_csum = data;
-	return 0;
+
+	/* Disable TPA, when Rx CSUM is disabled. Otherwise all
+	   TPA'ed packets will be discarded due to wrong TCP CSUM */
+	if (!data) {
+		u32 flags = ethtool_op_get_flags(dev);
+
+		rc = bnx2x_set_flags(dev, (flags & ~ETH_FLAG_LRO));
+	}
+
+	return rc;
 }
 
 static int bnx2x_set_tso(struct net_device *dev, u32 data)
@@ -8335,6 +8497,7 @@ static int bnx2x_test_registers(struct bnx2x *bp)
 {
 	int idx, i, rc = -ENODEV;
 	u32 wr_val = 0;
+	int port = BP_PORT(bp);
 	static const struct {
 		u32  offset0;
 		u32  offset1;
@@ -8400,7 +8563,6 @@ static int bnx2x_test_registers(struct bnx2x *bp)
 
 		for (i = 0; reg_tbl[i].offset0 != 0xffffffff; i++) {
 			u32 offset, mask, save_val, val;
-			int port = BP_PORT(bp);
 
 			offset = reg_tbl[i].offset0 + port*reg_tbl[i].offset1;
 			mask = reg_tbl[i].mask;
@@ -8446,16 +8608,17 @@ static int bnx2x_test_memory(struct bnx2x *bp)
 	static const struct {
 		char *name;
 		u32 offset;
-		u32 mask;
+		u32 e1_mask;
+		u32 e1h_mask;
 	} prty_tbl[] = {
-		{ "CCM_REG_CCM_PRTY_STS",     CCM_REG_CCM_PRTY_STS,     0 },
-		{ "CFC_REG_CFC_PRTY_STS",     CFC_REG_CFC_PRTY_STS,     0 },
-		{ "DMAE_REG_DMAE_PRTY_STS",   DMAE_REG_DMAE_PRTY_STS,   0 },
-		{ "TCM_REG_TCM_PRTY_STS",     TCM_REG_TCM_PRTY_STS,     0 },
-		{ "UCM_REG_UCM_PRTY_STS",     UCM_REG_UCM_PRTY_STS,     0 },
-		{ "XCM_REG_XCM_PRTY_STS",     XCM_REG_XCM_PRTY_STS,     0x1 },
-
-		{ NULL, 0xffffffff, 0 }
+		{ "CCM_PRTY_STS",  CCM_REG_CCM_PRTY_STS,   0x3ffc0, 0 },
+		{ "CFC_PRTY_STS",  CFC_REG_CFC_PRTY_STS,   0x2,     0x2 },
+		{ "DMAE_PRTY_STS", DMAE_REG_DMAE_PRTY_STS, 0,       0 },
+		{ "TCM_PRTY_STS",  TCM_REG_TCM_PRTY_STS,   0x3ffc0, 0 },
+		{ "UCM_PRTY_STS",  UCM_REG_UCM_PRTY_STS,   0x3ffc0, 0 },
+		{ "XCM_PRTY_STS",  XCM_REG_XCM_PRTY_STS,   0x3ffc1, 0 },
+
+		{ NULL, 0xffffffff, 0, 0 }
 	};
 
 	if (!netif_running(bp->dev))
@@ -8469,7 +8632,8 @@ static int bnx2x_test_memory(struct bnx2x *bp)
 	/* Check the parity status */
 	for (i = 0; prty_tbl[i].offset != 0xffffffff; i++) {
 		val = REG_RD(bp, prty_tbl[i].offset);
-		if (val & ~(prty_tbl[i].mask)) {
+		if ((CHIP_IS_E1(bp) && (val & ~(prty_tbl[i].e1_mask))) ||
+		    (CHIP_IS_E1H(bp) && (val & ~(prty_tbl[i].e1h_mask)))) {
 			DP(NETIF_MSG_HW,
 			   "%s is 0x%x\n", prty_tbl[i].name, val);
 			goto test_mem_exit;
@@ -8482,34 +8646,6 @@ test_mem_exit:
 	return rc;
 }
 
-static void bnx2x_netif_start(struct bnx2x *bp)
-{
-	int i;
-
-	if (atomic_dec_and_test(&bp->intr_sem)) {
-		if (netif_running(bp->dev)) {
-			bnx2x_int_enable(bp);
-			for_each_queue(bp, i)
-				napi_enable(&bnx2x_fp(bp, i, napi));
-			if (bp->state == BNX2X_STATE_OPEN)
-				netif_wake_queue(bp->dev);
-		}
-	}
-}
-
-static void bnx2x_netif_stop(struct bnx2x *bp)
-{
-	int i;
-
-	if (netif_running(bp->dev)) {
-		netif_tx_disable(bp->dev);
-		bp->dev->trans_start = jiffies;	/* prevent tx timeout */
-		for_each_queue(bp, i)
-			napi_disable(&bnx2x_fp(bp, i, napi));
-	}
-	bnx2x_int_disable_sync(bp);
-}
-
 static void bnx2x_wait_for_link(struct bnx2x *bp, u8 link_up)
 {
 	int cnt = 1000;
@@ -8539,15 +8675,15 @@ static int bnx2x_run_loopback(struct bnx2x *bp, int loopback_mode, u8 link_up)
 
 	if (loopback_mode == BNX2X_MAC_LOOPBACK) {
 		bp->link_params.loopback_mode = LOOPBACK_BMAC;
-		bnx2x_phy_hw_lock(bp);
+		bnx2x_acquire_phy_lock(bp);
 		bnx2x_phy_init(&bp->link_params, &bp->link_vars);
-		bnx2x_phy_hw_unlock(bp);
+		bnx2x_release_phy_lock(bp);
 
 	} else if (loopback_mode == BNX2X_PHY_LOOPBACK) {
 		bp->link_params.loopback_mode = LOOPBACK_XGXS_10;
-		bnx2x_phy_hw_lock(bp);
+		bnx2x_acquire_phy_lock(bp);
 		bnx2x_phy_init(&bp->link_params, &bp->link_vars);
-		bnx2x_phy_hw_unlock(bp);
+		bnx2x_release_phy_lock(bp);
 		/* wait until link state is restored */
 		bnx2x_wait_for_link(bp, link_up);
 
@@ -8771,7 +8907,7 @@ static void bnx2x_self_test(struct net_device *dev,
 	if (!netif_running(dev))
 		return;
 
-	/* offline tests are not suppoerted in MF mode */
+	/* offline tests are not supported in MF mode */
 	if (IS_E1HMF(bp))
 		etest->flags &= ~ETH_TEST_FL_OFFLINE;
 
@@ -8827,76 +8963,99 @@ static const struct {
 	long offset;
 	int size;
 	u32 flags;
-	char string[ETH_GSTRING_LEN];
+#define STATS_FLAGS_PORT		1
+#define STATS_FLAGS_FUNC		2
+	u8 string[ETH_GSTRING_LEN];
 } bnx2x_stats_arr[BNX2X_NUM_STATS] = {
-/* 1 */	{ STATS_OFFSET32(valid_bytes_received_hi),     8, 1, "rx_bytes" },
-	{ STATS_OFFSET32(error_bytes_received_hi),     8, 1, "rx_error_bytes" },
-	{ STATS_OFFSET32(total_bytes_transmitted_hi),  8, 1, "tx_bytes" },
-	{ STATS_OFFSET32(tx_stat_ifhcoutbadoctets_hi), 8, 0, "tx_error_bytes" },
+/* 1 */	{ STATS_OFFSET32(valid_bytes_received_hi),
+				8, STATS_FLAGS_FUNC, "rx_bytes" },
+	{ STATS_OFFSET32(error_bytes_received_hi),
+				8, STATS_FLAGS_FUNC, "rx_error_bytes" },
+	{ STATS_OFFSET32(total_bytes_transmitted_hi),
+				8, STATS_FLAGS_FUNC, "tx_bytes" },
+	{ STATS_OFFSET32(tx_stat_ifhcoutbadoctets_hi),
+				8, STATS_FLAGS_PORT, "tx_error_bytes" },
 	{ STATS_OFFSET32(total_unicast_packets_received_hi),
-						8, 1, "rx_ucast_packets" },
+				8, STATS_FLAGS_FUNC, "rx_ucast_packets" },
 	{ STATS_OFFSET32(total_multicast_packets_received_hi),
-						8, 1, "rx_mcast_packets" },
+				8, STATS_FLAGS_FUNC, "rx_mcast_packets" },
 	{ STATS_OFFSET32(total_broadcast_packets_received_hi),
-						8, 1, "rx_bcast_packets" },
+				8, STATS_FLAGS_FUNC, "rx_bcast_packets" },
 	{ STATS_OFFSET32(total_unicast_packets_transmitted_hi),
-						8, 1, "tx_packets" },
+				8, STATS_FLAGS_FUNC, "tx_packets" },
 	{ STATS_OFFSET32(tx_stat_dot3statsinternalmactransmiterrors_hi),
-						8, 0, "tx_mac_errors" },
+				8, STATS_FLAGS_PORT, "tx_mac_errors" },
 /* 10 */{ STATS_OFFSET32(rx_stat_dot3statscarriersenseerrors_hi),
-						8, 0, "tx_carrier_errors" },
+				8, STATS_FLAGS_PORT, "tx_carrier_errors" },
 	{ STATS_OFFSET32(rx_stat_dot3statsfcserrors_hi),
-						8, 0, "rx_crc_errors" },
+				8, STATS_FLAGS_PORT, "rx_crc_errors" },
 	{ STATS_OFFSET32(rx_stat_dot3statsalignmenterrors_hi),
-						8, 0, "rx_align_errors" },
+				8, STATS_FLAGS_PORT, "rx_align_errors" },
 	{ STATS_OFFSET32(tx_stat_dot3statssinglecollisionframes_hi),
-						8, 0, "tx_single_collisions" },
+				8, STATS_FLAGS_PORT, "tx_single_collisions" },
 	{ STATS_OFFSET32(tx_stat_dot3statsmultiplecollisionframes_hi),
-						8, 0, "tx_multi_collisions" },
+				8, STATS_FLAGS_PORT, "tx_multi_collisions" },
 	{ STATS_OFFSET32(tx_stat_dot3statsdeferredtransmissions_hi),
-						8, 0, "tx_deferred" },
+				8, STATS_FLAGS_PORT, "tx_deferred" },
 	{ STATS_OFFSET32(tx_stat_dot3statsexcessivecollisions_hi),
-						8, 0, "tx_excess_collisions" },
+				8, STATS_FLAGS_PORT, "tx_excess_collisions" },
 	{ STATS_OFFSET32(tx_stat_dot3statslatecollisions_hi),
-						8, 0, "tx_late_collisions" },
+				8, STATS_FLAGS_PORT, "tx_late_collisions" },
 	{ STATS_OFFSET32(tx_stat_etherstatscollisions_hi),
-						8, 0, "tx_total_collisions" },
+				8, STATS_FLAGS_PORT, "tx_total_collisions" },
 	{ STATS_OFFSET32(rx_stat_etherstatsfragments_hi),
-						8, 0, "rx_fragments" },
-/* 20 */{ STATS_OFFSET32(rx_stat_etherstatsjabbers_hi), 8, 0, "rx_jabbers" },
+				8, STATS_FLAGS_PORT, "rx_fragments" },
+/* 20 */{ STATS_OFFSET32(rx_stat_etherstatsjabbers_hi),
+				8, STATS_FLAGS_PORT, "rx_jabbers" },
 	{ STATS_OFFSET32(rx_stat_etherstatsundersizepkts_hi),
-						8, 0, "rx_undersize_packets" },
+				8, STATS_FLAGS_PORT, "rx_undersize_packets" },
 	{ STATS_OFFSET32(jabber_packets_received),
-						4, 1, "rx_oversize_packets" },
+				4, STATS_FLAGS_FUNC, "rx_oversize_packets" },
 	{ STATS_OFFSET32(tx_stat_etherstatspkts64octets_hi),
-						8, 0, "tx_64_byte_packets" },
+				8, STATS_FLAGS_PORT, "tx_64_byte_packets" },
 	{ STATS_OFFSET32(tx_stat_etherstatspkts65octetsto127octets_hi),
-					8, 0, "tx_65_to_127_byte_packets" },
+			8, STATS_FLAGS_PORT, "tx_65_to_127_byte_packets" },
 	{ STATS_OFFSET32(tx_stat_etherstatspkts128octetsto255octets_hi),
-					8, 0, "tx_128_to_255_byte_packets" },
+			8, STATS_FLAGS_PORT, "tx_128_to_255_byte_packets" },
 	{ STATS_OFFSET32(tx_stat_etherstatspkts256octetsto511octets_hi),
-					8, 0, "tx_256_to_511_byte_packets" },
+			8, STATS_FLAGS_PORT, "tx_256_to_511_byte_packets" },
 	{ STATS_OFFSET32(tx_stat_etherstatspkts512octetsto1023octets_hi),
-					8, 0, "tx_512_to_1023_byte_packets" },
+			8, STATS_FLAGS_PORT, "tx_512_to_1023_byte_packets" },
 	{ STATS_OFFSET32(etherstatspkts1024octetsto1522octets_hi),
-					8, 0, "tx_1024_to_1522_byte_packets" },
+			8, STATS_FLAGS_PORT, "tx_1024_to_1522_byte_packets" },
 	{ STATS_OFFSET32(etherstatspktsover1522octets_hi),
-					8, 0, "tx_1523_to_9022_byte_packets" },
+			8, STATS_FLAGS_PORT, "tx_1523_to_9022_byte_packets" },
 /* 30 */{ STATS_OFFSET32(rx_stat_xonpauseframesreceived_hi),
-						8, 0, "rx_xon_frames" },
+				8, STATS_FLAGS_PORT, "rx_xon_frames" },
 	{ STATS_OFFSET32(rx_stat_xoffpauseframesreceived_hi),
-						8, 0, "rx_xoff_frames" },
-	{ STATS_OFFSET32(tx_stat_outxonsent_hi),  8, 0, "tx_xon_frames" },
-	{ STATS_OFFSET32(tx_stat_outxoffsent_hi), 8, 0, "tx_xoff_frames" },
+				8, STATS_FLAGS_PORT, "rx_xoff_frames" },
+	{ STATS_OFFSET32(tx_stat_outxonsent_hi),
+				8, STATS_FLAGS_PORT, "tx_xon_frames" },
+	{ STATS_OFFSET32(tx_stat_outxoffsent_hi),
+				8, STATS_FLAGS_PORT, "tx_xoff_frames" },
 	{ STATS_OFFSET32(rx_stat_maccontrolframesreceived_hi),
-						8, 0, "rx_mac_ctrl_frames" },
-	{ STATS_OFFSET32(mac_filter_discard),   4, 1, "rx_filtered_packets" },
-	{ STATS_OFFSET32(no_buff_discard),      4, 1, "rx_discards" },
-	{ STATS_OFFSET32(xxoverflow_discard),   4, 1, "rx_fw_discards" },
-	{ STATS_OFFSET32(brb_drop_hi),          8, 1, "brb_discard" },
-/* 39 */{ STATS_OFFSET32(brb_truncate_discard), 8, 1, "brb_truncate" }
+				8, STATS_FLAGS_PORT, "rx_mac_ctrl_frames" },
+	{ STATS_OFFSET32(mac_filter_discard),
+				4, STATS_FLAGS_PORT, "rx_filtered_packets" },
+	{ STATS_OFFSET32(no_buff_discard),
+				4, STATS_FLAGS_FUNC, "rx_discards" },
+	{ STATS_OFFSET32(xxoverflow_discard),
+				4, STATS_FLAGS_PORT, "rx_fw_discards" },
+	{ STATS_OFFSET32(brb_drop_hi),
+				8, STATS_FLAGS_PORT, "brb_discard" },
+	{ STATS_OFFSET32(brb_truncate_hi),
+				8, STATS_FLAGS_PORT, "brb_truncate" },
+/* 40 */{ STATS_OFFSET32(rx_err_discard_pkt),
+				4, STATS_FLAGS_FUNC, "rx_phy_ip_err_discards"},
+	{ STATS_OFFSET32(rx_skb_alloc_failed),
+				4, STATS_FLAGS_FUNC, "rx_skb_alloc_discard" },
+/* 42 */{ STATS_OFFSET32(hw_csum_err),
+				4, STATS_FLAGS_FUNC, "rx_csum_offload_errors" }
 };
 
+#define IS_NOT_E1HMF_STAT(bp, i) \
+		(IS_E1HMF(bp) && (bnx2x_stats_arr[i].flags & STATS_FLAGS_PORT))
+
 static void bnx2x_get_strings(struct net_device *dev, u32 stringset, u8 *buf)
 {
 	struct bnx2x *bp = netdev_priv(dev);
@@ -8905,7 +9064,7 @@ static void bnx2x_get_strings(struct net_device *dev, u32 stringset, u8 *buf)
 	switch (stringset) {
 	case ETH_SS_STATS:
 		for (i = 0, j = 0; i < BNX2X_NUM_STATS; i++) {
-			if (IS_E1HMF(bp) && (!bnx2x_stats_arr[i].flags))
+			if (IS_NOT_E1HMF_STAT(bp, i))
 				continue;
 			strcpy(buf + j*ETH_GSTRING_LEN,
 			       bnx2x_stats_arr[i].string);
@@ -8925,7 +9084,7 @@ static int bnx2x_get_stats_count(struct net_device *dev)
 	int i, num_stats = 0;
 
 	for (i = 0; i < BNX2X_NUM_STATS; i++) {
-		if (IS_E1HMF(bp) && (!bnx2x_stats_arr[i].flags))
+		if (IS_NOT_E1HMF_STAT(bp, i))
 			continue;
 		num_stats++;
 	}
@@ -8940,7 +9099,7 @@ static void bnx2x_get_ethtool_stats(struct net_device *dev,
 	int i, j;
 
 	for (i = 0, j = 0; i < BNX2X_NUM_STATS; i++) {
-		if (IS_E1HMF(bp) && (!bnx2x_stats_arr[i].flags))
+		if (IS_NOT_E1HMF_STAT(bp, i))
 			continue;
 
 		if (bnx2x_stats_arr[i].size == 0) {
@@ -9057,7 +9216,7 @@ static int bnx2x_set_power_state(struct bnx2x *bp, pci_power_t state)
 				       PCI_PM_CTRL_PME_STATUS));
 
 		if (pmcsr & PCI_PM_CTRL_STATE_MASK)
-		/* delay required during transition out of D3hot */
+			/* delay required during transition out of D3hot */
 			msleep(20);
 		break;
 
@@ -9092,6 +9251,7 @@ static int bnx2x_poll(struct napi_struct *napi, int budget)
 						 napi);
 	struct bnx2x *bp = fp->bp;
 	int work_done = 0;
+	u16 rx_cons_sb;
 
 #ifdef BNX2X_STOP_ON_ERROR
 	if (unlikely(bp->panic))
@@ -9104,17 +9264,22 @@ static int bnx2x_poll(struct napi_struct *napi, int budget)
 
 	bnx2x_update_fpsb_idx(fp);
 
-	if ((fp->tx_pkt_prod != le16_to_cpu(*fp->tx_cons_sb)) ||
-	    (fp->tx_pkt_prod != fp->tx_pkt_cons))
+	if (BNX2X_HAS_TX_WORK(fp))
 		bnx2x_tx_int(fp, budget);
 
-	if (le16_to_cpu(*fp->rx_cons_sb) != fp->rx_comp_cons)
+	rx_cons_sb = le16_to_cpu(*fp->rx_cons_sb);
+	if ((rx_cons_sb & MAX_RCQ_DESC_CNT) == MAX_RCQ_DESC_CNT)
+		rx_cons_sb++;
+	if (BNX2X_HAS_RX_WORK(fp))
 		work_done = bnx2x_rx_int(fp, budget);
 
-	rmb(); /* bnx2x_has_work() reads the status block */
+	rmb(); /* BNX2X_HAS_WORK() reads the status block */
+	rx_cons_sb = le16_to_cpu(*fp->rx_cons_sb);
+	if ((rx_cons_sb & MAX_RCQ_DESC_CNT) == MAX_RCQ_DESC_CNT)
+		rx_cons_sb++;
 
 	/* must not complete if we consumed full budget */
-	if ((work_done < budget) && !bnx2x_has_work(fp)) {
+	if ((work_done < budget) && !BNX2X_HAS_WORK(fp)) {
 
 #ifdef BNX2X_STOP_ON_ERROR
 poll_panic:
@@ -9131,7 +9296,7 @@ poll_panic:
 
 
 /* we split the first BD into headers and data BDs
- * to ease the pain of our fellow micocode engineers
+ * to ease the pain of our fellow microcode engineers
  * we use one mapping for both BDs
  * So far this has only been observed to happen
  * in Other Operating Systems(TM)
@@ -9238,7 +9403,7 @@ static int bnx2x_pkt_req_lin(struct bnx2x *bp, struct sk_buff *skb,
 			/* Check if LSO packet needs to be copied:
 			   3 = 1 (for headers BD) + 2 (for PBD and last BD) */
 			int wnd_size = MAX_FETCH_BD - 3;
-			/* Number of widnows to check */
+			/* Number of windows to check */
 			int num_wnds = skb_shinfo(skb)->nr_frags - wnd_size;
 			int wnd_idx = 0;
 			int frag_idx = 0;
@@ -9327,8 +9492,7 @@ static int bnx2x_start_xmit(struct sk_buff *skb, struct net_device *dev)
 	fp_index = (smp_processor_id() % bp->num_queues);
 	fp = &bp->fp[fp_index];
 
-	if (unlikely(bnx2x_tx_avail(bp->fp) <
-					(skb_shinfo(skb)->nr_frags + 3))) {
+	if (unlikely(bnx2x_tx_avail(fp) < (skb_shinfo(skb)->nr_frags + 3))) {
 		bp->eth_stats.driver_xoff++,
 		netif_stop_queue(dev);
 		BNX2X_ERR("BUG! Tx ring full when queue awake!\n");
@@ -9340,7 +9504,7 @@ static int bnx2x_start_xmit(struct sk_buff *skb, struct net_device *dev)
 	   skb->ip_summed, skb->protocol, ipv6_hdr(skb)->nexthdr,
 	   ip_hdr(skb)->protocol, skb_shinfo(skb)->gso_type, xmit_type);
 
-	/* First, check if we need to linearaize the skb
+	/* First, check if we need to linearize the skb
 	   (due to FW restrictions) */
 	if (bnx2x_pkt_req_lin(bp, skb, xmit_type)) {
 		/* Statistics of linearization */
@@ -9349,7 +9513,7 @@ static int bnx2x_start_xmit(struct sk_buff *skb, struct net_device *dev)
 			DP(NETIF_MSG_TX_QUEUED, "SKB linearization failed - "
 			   "silently dropping this SKB\n");
 			dev_kfree_skb_any(skb);
-			return 0;
+			return NETDEV_TX_OK;
 		}
 	}
 
@@ -9372,7 +9536,8 @@ static int bnx2x_start_xmit(struct sk_buff *skb, struct net_device *dev)
 	tx_bd->bd_flags.as_bitfield = ETH_TX_BD_FLAGS_START_BD;
 	tx_bd->general_data = (UNICAST_ADDRESS <<
 			       ETH_TX_BD_ETH_ADDR_TYPE_SHIFT);
-	tx_bd->general_data |= 1; /* header nbd */
+	/* header nbd */
+	tx_bd->general_data |= (1 << ETH_TX_BD_HDR_NBDS_SHIFT);
 
 	/* remember the first BD of the packet */
 	tx_buf->first_bd = fp->tx_bd_prod;
@@ -9390,7 +9555,6 @@ static int bnx2x_start_xmit(struct sk_buff *skb, struct net_device *dev)
 		tx_bd->vlan = cpu_to_le16(pkt_prod);
 
 	if (xmit_type) {
-
 		/* turn on parsing and get a BD */
 		bd_prod = TX_BD(NEXT_TX_IDX(bd_prod));
 		pbd = (void *)&fp->tx_desc_ring[bd_prod];
@@ -9451,7 +9615,7 @@ static int bnx2x_start_xmit(struct sk_buff *skb, struct net_device *dev)
 
 	tx_bd->addr_hi = cpu_to_le32(U64_HI(mapping));
 	tx_bd->addr_lo = cpu_to_le32(U64_LO(mapping));
-	nbd = skb_shinfo(skb)->nr_frags + ((pbd == NULL)? 1 : 2);
+	nbd = skb_shinfo(skb)->nr_frags + ((pbd == NULL) ? 1 : 2);
 	tx_bd->nbd = cpu_to_le16(nbd);
 	tx_bd->nbytes = cpu_to_le16(skb_headlen(skb));
 
@@ -9721,9 +9885,9 @@ static int bnx2x_change_mac_addr(struct net_device *dev, void *p)
 	memcpy(dev->dev_addr, addr->sa_data, dev->addr_len);
 	if (netif_running(dev)) {
 		if (CHIP_IS_E1(bp))
-			bnx2x_set_mac_addr_e1(bp);
+			bnx2x_set_mac_addr_e1(bp, 1);
 		else
-			bnx2x_set_mac_addr_e1h(bp);
+			bnx2x_set_mac_addr_e1h(bp, 1);
 	}
 
 	return 0;
@@ -9734,6 +9898,7 @@ static int bnx2x_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
 {
 	struct mii_ioctl_data *data = if_mii(ifr);
 	struct bnx2x *bp = netdev_priv(dev);
+	int port = BP_PORT(bp);
 	int err;
 
 	switch (cmd) {
@@ -9749,7 +9914,7 @@ static int bnx2x_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
 			return -EAGAIN;
 
 		mutex_lock(&bp->port.phy_mutex);
-		err = bnx2x_cl45_read(bp, BP_PORT(bp), 0, bp->port.phy_addr,
+		err = bnx2x_cl45_read(bp, port, 0, bp->port.phy_addr,
 				      DEFAULT_PHY_DEV_ADDR,
 				      (data->reg_num & 0x1f), &mii_regval);
 		data->val_out = mii_regval;
@@ -9765,7 +9930,7 @@ static int bnx2x_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
 			return -EAGAIN;
 
 		mutex_lock(&bp->port.phy_mutex);
-		err = bnx2x_cl45_write(bp, BP_PORT(bp), 0, bp->port.phy_addr,
+		err = bnx2x_cl45_write(bp, port, 0, bp->port.phy_addr,
 				       DEFAULT_PHY_DEV_ADDR,
 				       (data->reg_num & 0x1f), data->val_in);
 		mutex_unlock(&bp->port.phy_mutex);
@@ -10141,7 +10306,7 @@ static int bnx2x_suspend(struct pci_dev *pdev, pm_message_t state)
 
 	netif_device_detach(dev);
 
-	bnx2x_nic_unload(bp, UNLOAD_NORMAL);
+	bnx2x_nic_unload(bp, UNLOAD_CLOSE);
 
 	bnx2x_set_power_state(bp, pci_choose_state(pdev, state));
 
@@ -10174,7 +10339,7 @@ static int bnx2x_resume(struct pci_dev *pdev)
 	bnx2x_set_power_state(bp, PCI_D0);
 	netif_device_attach(dev);
 
-	rc = bnx2x_nic_load(bp, LOAD_NORMAL);
+	rc = bnx2x_nic_load(bp, LOAD_OPEN);
 
 	rtnl_unlock();
 
diff --git a/drivers/net/bnx2x_reg.h b/drivers/net/bnx2x_reg.h
index 15c9a9946724..a67b0c358ae4 100644
--- a/drivers/net/bnx2x_reg.h
+++ b/drivers/net/bnx2x_reg.h
@@ -6,7 +6,7 @@
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation.
  *
- * The registers description starts with the regsister Access type followed
+ * The registers description starts with the register Access type followed
  * by size in bits. For example [RW 32]. The access types are:
  * R  - Read only
  * RC - Clear on read
@@ -49,7 +49,7 @@
 /* [RW 10] Write client 0: Assert pause threshold. */
 #define BRB1_REG_PAUSE_LOW_THRESHOLD_0				 0x60068
 #define BRB1_REG_PAUSE_LOW_THRESHOLD_1				 0x6006c
-/* [R 24] The number of full blocks occpied by port. */
+/* [R 24] The number of full blocks occupied by port. */
 #define BRB1_REG_PORT_NUM_OCC_BLOCKS_0				 0x60094
 /* [RW 1] Reset the design by software. */
 #define BRB1_REG_SOFT_RESET					 0x600dc
@@ -740,6 +740,7 @@
 #define HC_REG_ATTN_MSG1_ADDR_L 				 0x108020
 #define HC_REG_ATTN_NUM_P0					 0x108038
 #define HC_REG_ATTN_NUM_P1					 0x10803c
+#define HC_REG_COMMAND_REG					 0x108180
 #define HC_REG_CONFIG_0 					 0x108000
 #define HC_REG_CONFIG_1 					 0x108004
 #define HC_REG_FUNC_NUM_P0					 0x1080ac
@@ -1372,6 +1373,23 @@
    be asserted). */
 #define MISC_REG_DRIVER_CONTROL_16				 0xa5f0
 #define MISC_REG_DRIVER_CONTROL_16_SIZE 			 2
+/* [RW 32] The following driver registers(1...16) represent 16 drivers and
+   32 clients. Each client can be controlled by one driver only. One in each
+   bit represent that this driver control the appropriate client (Ex: bit 5
+   is set means this driver control client number 5). addr1 = set; addr0 =
+   clear; read from both addresses will give the same result = status. write
+   to address 1 will set a request to control all the clients that their
+   appropriate bit (in the write command) is set. if the client is free (the
+   appropriate bit in all the other drivers is clear) one will be written to
+   that driver register; if the client isn't free the bit will remain zero.
+   if the appropriate bit is set (the driver request to gain control on a
+   client it already controls the ~MISC_REGISTERS_INT_STS.GENERIC_SW
+   interrupt will be asserted). write to address 0 will set a request to
+   free all the clients that their appropriate bit (in the write command) is
+   set. if the appropriate bit is clear (the driver request to free a client
+   it doesn't controls the ~MISC_REGISTERS_INT_STS.GENERIC_SW interrupt will
+   be asserted). */
+#define MISC_REG_DRIVER_CONTROL_7				 0xa3c8
 /* [RW 1] e1hmf for WOL. If clr WOL signal o the PXP will be send on bit 0
    only. */
 #define MISC_REG_E1HMF_MODE					 0xa5f8
@@ -1394,13 +1412,13 @@
 #define MISC_REG_GPIO						 0xa490
 /* [R 28] this field hold the last information that caused reserved
    attention. bits [19:0] - address; [22:20] function; [23] reserved;
-   [27:24] the master thatcaused the attention - according to the following
+   [27:24] the master that caused the attention - according to the following
    encodeing:1 = pxp; 2 = mcp; 3 = usdm; 4 = tsdm; 5 = xsdm; 6 = csdm; 7 =
    dbu; 8 = dmae */
 #define MISC_REG_GRC_RSV_ATTN					 0xa3c0
 /* [R 28] this field hold the last information that caused timeout
    attention. bits [19:0] - address; [22:20] function; [23] reserved;
-   [27:24] the master thatcaused the attention - according to the following
+   [27:24] the master that caused the attention - according to the following
    encodeing:1 = pxp; 2 = mcp; 3 = usdm; 4 = tsdm; 5 = xsdm; 6 = csdm; 7 =
    dbu; 8 = dmae */
 #define MISC_REG_GRC_TIMEOUT_ATTN				 0xa3c4
@@ -1677,6 +1695,7 @@
 /* [RW 8] init credit counter for port0 in LLH */
 #define NIG_REG_LLH0_XCM_INIT_CREDIT				 0x10554
 #define NIG_REG_LLH0_XCM_MASK					 0x10130
+#define NIG_REG_LLH1_BRB1_DRV_MASK				 0x10248
 /* [RW 1] send to BRB1 if no match on any of RMP rules. */
 #define NIG_REG_LLH1_BRB1_NOT_MCP				 0x102dc
 /* [RW 2] Determine the classification participants. 0: no classification.1:
@@ -1727,6 +1746,9 @@
 /* [R 32] Rx statistics : In user packets discarded due to BRB backpressure
    for port0 */
 #define NIG_REG_STAT0_BRB_DISCARD				 0x105f0
+/* [R 32] Rx statistics : In user packets truncated due to BRB backpressure
+   for port0 */
+#define NIG_REG_STAT0_BRB_TRUNCATE				 0x105f8
 /* [WB_R 36] Tx statistics : Number of packets from emac0 or bmac0 that
    between 1024 and 1522 bytes for port0 */
 #define NIG_REG_STAT0_EGRESS_MAC_PKT0				 0x10750
@@ -2298,7 +2320,7 @@
 /* [RW 3] page size in L2P table for QM module; -4k; -8k; -16k; -32k; -64k;
    -128k */
 #define PXP2_REG_RQ_QM_P_SIZE					 0x120050
-/* [RW 1] 1' indicates that the RBC has finished configurating the PSWRQ */
+/* [RW 1] 1' indicates that the RBC has finished configuring the PSWRQ */
 #define PXP2_REG_RQ_RBC_DONE					 0x1201b0
 /* [RW 3] Max burst size filed for read requests port 0; 000 - 128B;
    001:256B; 010: 512B; 11:1K:100:2K; 01:4K */
@@ -2406,7 +2428,7 @@
 /* [RW 2] 0 - 128B;  - 256B;  - 512B;  - 1024B; when the payload in the
    buffer reaches this number has_payload will be asserted */
 #define PXP2_REG_WR_DMAE_MPS					 0x1205ec
-/* [RW 10] if Number of entries in dmae fifo will be higer than this
+/* [RW 10] if Number of entries in dmae fifo will be higher than this
    threshold then has_payload indication will be asserted; the default value
    should be equal to &gt;  write MBS size! */
 #define PXP2_REG_WR_DMAE_TH					 0x120368
@@ -2427,7 +2449,7 @@
 /* [RW 2] 0 - 128B;  - 256B;  - 512B;  - 1024B; when the payload in the
    buffer reaches this number has_payload will be asserted */
 #define PXP2_REG_WR_TSDM_MPS					 0x1205d4
-/* [RW 10] if Number of entries in usdmdp fifo will be higer than this
+/* [RW 10] if Number of entries in usdmdp fifo will be higher than this
    threshold then has_payload indication will be asserted; the default value
    should be equal to &gt;  write MBS size! */
 #define PXP2_REG_WR_USDMDP_TH					 0x120348
@@ -3294,12 +3316,12 @@
 #define XSEM_XSEM_INT_MASK_0_REG_ADDRESS_ERROR_SIZE		 0
 #define CFC_DEBUG1_REG_WRITE_AC 				 (0x1<<4)
 #define CFC_DEBUG1_REG_WRITE_AC_SIZE				 4
-/* [R 1] debug only: This bit indicates wheter indicates that external
+/* [R 1] debug only: This bit indicates whether indicates that external
    buffer was wrapped (oldest data was thrown); Relevant only when
    ~dbg_registers_debug_target=2 (PCI) & ~dbg_registers_full_mode=1 (wrap); */
 #define DBG_REG_WRAP_ON_EXT_BUFFER				 0xc124
 #define DBG_REG_WRAP_ON_EXT_BUFFER_SIZE 			 1
-/* [R 1] debug only: This bit indicates wheter the internal buffer was
+/* [R 1] debug only: This bit indicates whether the internal buffer was
    wrapped (oldest data was thrown) Relevant only when
    ~dbg_registers_debug_target=0 (internal buffer) */
 #define DBG_REG_WRAP_ON_INT_BUFFER				 0xc128
@@ -4944,6 +4966,7 @@
 #define EMAC_RX_MODE_PROMISCUOUS				 (1L<<8)
 #define EMAC_RX_MTU_SIZE_JUMBO_ENA				 (1L<<31)
 #define EMAC_TX_MODE_EXT_PAUSE_EN				 (1L<<3)
+#define EMAC_TX_MODE_FLOW_EN					 (1L<<4)
 #define MISC_REGISTERS_GPIO_0					 0
 #define MISC_REGISTERS_GPIO_1					 1
 #define MISC_REGISTERS_GPIO_2					 2
@@ -4959,6 +4982,7 @@
 #define MISC_REGISTERS_GPIO_PORT_SHIFT				 4
 #define MISC_REGISTERS_GPIO_SET_POS				 8
 #define MISC_REGISTERS_RESET_REG_1_CLEAR			 0x588
+#define MISC_REGISTERS_RESET_REG_1_RST_NIG			 (0x1<<7)
 #define MISC_REGISTERS_RESET_REG_1_SET				 0x584
 #define MISC_REGISTERS_RESET_REG_2_CLEAR			 0x598
 #define MISC_REGISTERS_RESET_REG_2_RST_BMAC0			 (0x1<<0)
@@ -4993,7 +5017,9 @@
 #define HW_LOCK_MAX_RESOURCE_VALUE				 31
 #define HW_LOCK_RESOURCE_8072_MDIO				 0
 #define HW_LOCK_RESOURCE_GPIO					 1
+#define HW_LOCK_RESOURCE_PORT0_ATT_MASK 			 3
 #define HW_LOCK_RESOURCE_SPIO					 2
+#define HW_LOCK_RESOURCE_UNDI					 5
 #define AEU_INPUTS_ATTN_BITS_BRB_PARITY_ERROR		      (1<<18)
 #define AEU_INPUTS_ATTN_BITS_CCM_HW_INTERRUPT		      (1<<31)
 #define AEU_INPUTS_ATTN_BITS_CDU_HW_INTERRUPT		      (1<<9)
@@ -5144,59 +5170,73 @@
 #define GRCBASE_MISC_AEU	GRCBASE_MISC
 
 
-/*the offset of the configuration space in the pci core register*/
+/* offset of configuration space in the pci core register */
 #define PCICFG_OFFSET					0x2000
 #define PCICFG_VENDOR_ID_OFFSET 			0x00
 #define PCICFG_DEVICE_ID_OFFSET 			0x02
 #define PCICFG_COMMAND_OFFSET				0x04
+#define PCICFG_COMMAND_IO_SPACE 		(1<<0)
+#define PCICFG_COMMAND_MEM_SPACE		(1<<1)
+#define PCICFG_COMMAND_BUS_MASTER		(1<<2)
+#define PCICFG_COMMAND_SPECIAL_CYCLES		(1<<3)
+#define PCICFG_COMMAND_MWI_CYCLES		(1<<4)
+#define PCICFG_COMMAND_VGA_SNOOP		(1<<5)
+#define PCICFG_COMMAND_PERR_ENA 		(1<<6)
+#define PCICFG_COMMAND_STEPPING 		(1<<7)
+#define PCICFG_COMMAND_SERR_ENA 		(1<<8)
+#define PCICFG_COMMAND_FAST_B2B 		(1<<9)
+#define PCICFG_COMMAND_INT_DISABLE		(1<<10)
+#define PCICFG_COMMAND_RESERVED 		(0x1f<<11)
 #define PCICFG_STATUS_OFFSET				0x06
-#define PCICFG_REVESION_ID				    0x08
+#define PCICFG_REVESION_ID				0x08
 #define PCICFG_CACHE_LINE_SIZE				0x0c
 #define PCICFG_LATENCY_TIMER				0x0d
-#define PCICFG_BAR_1_LOW				    0x10
-#define PCICFG_BAR_1_HIGH				    0x14
-#define PCICFG_BAR_2_LOW				    0x18
-#define PCICFG_BAR_2_HIGH				    0x1c
-#define PCICFG_SUBSYSTEM_VENDOR_ID_OFFSET	0x2c
+#define PCICFG_BAR_1_LOW				0x10
+#define PCICFG_BAR_1_HIGH				0x14
+#define PCICFG_BAR_2_LOW				0x18
+#define PCICFG_BAR_2_HIGH				0x1c
+#define PCICFG_SUBSYSTEM_VENDOR_ID_OFFSET		0x2c
 #define PCICFG_SUBSYSTEM_ID_OFFSET			0x2e
-#define PCICFG_INT_LINE 				    0x3c
-#define PCICFG_INT_PIN					    0x3d
-#define PCICFG_PM_CSR_OFFSET			0x4c
-#define PCICFG_GRC_ADDRESS				    0x78
-#define PCICFG_GRC_DATA 				    0x80
+#define PCICFG_INT_LINE 				0x3c
+#define PCICFG_INT_PIN					0x3d
+#define PCICFG_PM_CAPABILITY				0x48
+#define PCICFG_PM_CAPABILITY_VERSION		(0x3<<16)
+#define PCICFG_PM_CAPABILITY_CLOCK		(1<<19)
+#define PCICFG_PM_CAPABILITY_RESERVED		(1<<20)
+#define PCICFG_PM_CAPABILITY_DSI		(1<<21)
+#define PCICFG_PM_CAPABILITY_AUX_CURRENT	(0x7<<22)
+#define PCICFG_PM_CAPABILITY_D1_SUPPORT 	(1<<25)
+#define PCICFG_PM_CAPABILITY_D2_SUPPORT 	(1<<26)
+#define PCICFG_PM_CAPABILITY_PME_IN_D0		(1<<27)
+#define PCICFG_PM_CAPABILITY_PME_IN_D1		(1<<28)
+#define PCICFG_PM_CAPABILITY_PME_IN_D2		(1<<29)
+#define PCICFG_PM_CAPABILITY_PME_IN_D3_HOT	(1<<30)
+#define PCICFG_PM_CAPABILITY_PME_IN_D3_COLD	(1<<31)
+#define PCICFG_PM_CSR_OFFSET				0x4c
+#define PCICFG_PM_CSR_STATE			(0x3<<0)
+#define PCICFG_PM_CSR_PME_ENABLE		(1<<8)
+#define PCICFG_PM_CSR_PME_STATUS		(1<<15)
+#define PCICFG_GRC_ADDRESS				0x78
+#define PCICFG_GRC_DATA 				0x80
 #define PCICFG_DEVICE_CONTROL				0xb4
 #define PCICFG_LINK_CONTROL				0xbc
 
-#define PCICFG_COMMAND_IO_SPACE 		    (1<<0)
-#define PCICFG_COMMAND_MEM_SPACE		    (1<<1)
-#define PCICFG_COMMAND_BUS_MASTER		    (1<<2)
-#define PCICFG_COMMAND_SPECIAL_CYCLES		    (1<<3)
-#define PCICFG_COMMAND_MWI_CYCLES		    (1<<4)
-#define PCICFG_COMMAND_VGA_SNOOP		    (1<<5)
-#define PCICFG_COMMAND_PERR_ENA 		    (1<<6)
-#define PCICFG_COMMAND_STEPPING 		    (1<<7)
-#define PCICFG_COMMAND_SERR_ENA 		    (1<<8)
-#define PCICFG_COMMAND_FAST_B2B 		    (1<<9)
-#define PCICFG_COMMAND_INT_DISABLE		    (1<<10)
-#define PCICFG_COMMAND_RESERVED 		    (0x1f<<11)
-
-#define PCICFG_PM_CSR_STATE			    (0x3<<0)
-#define PCICFG_PM_CSR_PME_STATUS		    (1<<15)
 
 #define BAR_USTRORM_INTMEM				0x400000
 #define BAR_CSTRORM_INTMEM				0x410000
 #define BAR_XSTRORM_INTMEM				0x420000
 #define BAR_TSTRORM_INTMEM				0x430000
 
+/* for accessing the IGU in case of status block ACK */
 #define BAR_IGU_INTMEM					0x440000
 
 #define BAR_DOORBELL_OFFSET				0x800000
 
 #define BAR_ME_REGISTER 				0x450000
 
-
-#define GRC_CONFIG_2_SIZE_REG		    0x408 /* config_2 offset */
-#define PCI_CONFIG_2_BAR1_SIZE			    (0xfL<<0)
+/* config_2 offset */
+#define GRC_CONFIG_2_SIZE_REG				0x408
+#define PCI_CONFIG_2_BAR1_SIZE			(0xfL<<0)
 #define PCI_CONFIG_2_BAR1_SIZE_DISABLED 	(0L<<0)
 #define PCI_CONFIG_2_BAR1_SIZE_64K		(1L<<0)
 #define PCI_CONFIG_2_BAR1_SIZE_128K		(2L<<0)
@@ -5213,11 +5253,11 @@
 #define PCI_CONFIG_2_BAR1_SIZE_256M		(13L<<0)
 #define PCI_CONFIG_2_BAR1_SIZE_512M		(14L<<0)
 #define PCI_CONFIG_2_BAR1_SIZE_1G		(15L<<0)
-#define PCI_CONFIG_2_BAR1_64ENA 		    (1L<<4)
-#define PCI_CONFIG_2_EXP_ROM_RETRY		    (1L<<5)
-#define PCI_CONFIG_2_CFG_CYCLE_RETRY		    (1L<<6)
-#define PCI_CONFIG_2_FIRST_CFG_DONE		    (1L<<7)
-#define PCI_CONFIG_2_EXP_ROM_SIZE		    (0xffL<<8)
+#define PCI_CONFIG_2_BAR1_64ENA 		(1L<<4)
+#define PCI_CONFIG_2_EXP_ROM_RETRY		(1L<<5)
+#define PCI_CONFIG_2_CFG_CYCLE_RETRY		(1L<<6)
+#define PCI_CONFIG_2_FIRST_CFG_DONE		(1L<<7)
+#define PCI_CONFIG_2_EXP_ROM_SIZE		(0xffL<<8)
 #define PCI_CONFIG_2_EXP_ROM_SIZE_DISABLED	(0L<<8)
 #define PCI_CONFIG_2_EXP_ROM_SIZE_2K		(1L<<8)
 #define PCI_CONFIG_2_EXP_ROM_SIZE_4K		(2L<<8)
@@ -5234,46 +5274,44 @@
 #define PCI_CONFIG_2_EXP_ROM_SIZE_8M		(13L<<8)
 #define PCI_CONFIG_2_EXP_ROM_SIZE_16M		(14L<<8)
 #define PCI_CONFIG_2_EXP_ROM_SIZE_32M		(15L<<8)
-#define PCI_CONFIG_2_BAR_PREFETCH		    (1L<<16)
-#define PCI_CONFIG_2_RESERVED0			    (0x7fffL<<17)
+#define PCI_CONFIG_2_BAR_PREFETCH		(1L<<16)
+#define PCI_CONFIG_2_RESERVED0			(0x7fffL<<17)
 
 /* config_3 offset */
-#define GRC_CONFIG_3_SIZE_REG				(0x40c)
-#define PCI_CONFIG_3_STICKY_BYTE		    (0xffL<<0)
-#define PCI_CONFIG_3_FORCE_PME			    (1L<<24)
-#define PCI_CONFIG_3_PME_STATUS 		    (1L<<25)
-#define PCI_CONFIG_3_PME_ENABLE 		    (1L<<26)
-#define PCI_CONFIG_3_PM_STATE			    (0x3L<<27)
-#define PCI_CONFIG_3_VAUX_PRESET		    (1L<<30)
-#define PCI_CONFIG_3_PCI_POWER			    (1L<<31)
-
-/* config_2 offset */
-#define GRC_CONFIG_2_SIZE_REG		    0x408
+#define GRC_CONFIG_3_SIZE_REG				0x40c
+#define PCI_CONFIG_3_STICKY_BYTE		(0xffL<<0)
+#define PCI_CONFIG_3_FORCE_PME			(1L<<24)
+#define PCI_CONFIG_3_PME_STATUS 		(1L<<25)
+#define PCI_CONFIG_3_PME_ENABLE 		(1L<<26)
+#define PCI_CONFIG_3_PM_STATE			(0x3L<<27)
+#define PCI_CONFIG_3_VAUX_PRESET		(1L<<30)
+#define PCI_CONFIG_3_PCI_POWER			(1L<<31)
 
 #define GRC_BAR2_CONFIG 				0x4e0
-#define PCI_CONFIG_2_BAR2_SIZE			    (0xfL<<0)
-#define PCI_CONFIG_2_BAR2_SIZE_DISABLED 	    (0L<<0)
-#define PCI_CONFIG_2_BAR2_SIZE_64K		    (1L<<0)
-#define PCI_CONFIG_2_BAR2_SIZE_128K		    (2L<<0)
-#define PCI_CONFIG_2_BAR2_SIZE_256K		    (3L<<0)
-#define PCI_CONFIG_2_BAR2_SIZE_512K		    (4L<<0)
-#define PCI_CONFIG_2_BAR2_SIZE_1M		    (5L<<0)
-#define PCI_CONFIG_2_BAR2_SIZE_2M		    (6L<<0)
-#define PCI_CONFIG_2_BAR2_SIZE_4M		    (7L<<0)
-#define PCI_CONFIG_2_BAR2_SIZE_8M		    (8L<<0)
-#define PCI_CONFIG_2_BAR2_SIZE_16M		    (9L<<0)
-#define PCI_CONFIG_2_BAR2_SIZE_32M		    (10L<<0)
-#define PCI_CONFIG_2_BAR2_SIZE_64M		    (11L<<0)
-#define PCI_CONFIG_2_BAR2_SIZE_128M		    (12L<<0)
-#define PCI_CONFIG_2_BAR2_SIZE_256M		    (13L<<0)
-#define PCI_CONFIG_2_BAR2_SIZE_512M		    (14L<<0)
-#define PCI_CONFIG_2_BAR2_SIZE_1G		    (15L<<0)
-#define PCI_CONFIG_2_BAR2_64ENA 		    (1L<<4)
+#define PCI_CONFIG_2_BAR2_SIZE			(0xfL<<0)
+#define PCI_CONFIG_2_BAR2_SIZE_DISABLED 	(0L<<0)
+#define PCI_CONFIG_2_BAR2_SIZE_64K		(1L<<0)
+#define PCI_CONFIG_2_BAR2_SIZE_128K		(2L<<0)
+#define PCI_CONFIG_2_BAR2_SIZE_256K		(3L<<0)
+#define PCI_CONFIG_2_BAR2_SIZE_512K		(4L<<0)
+#define PCI_CONFIG_2_BAR2_SIZE_1M		(5L<<0)
+#define PCI_CONFIG_2_BAR2_SIZE_2M		(6L<<0)
+#define PCI_CONFIG_2_BAR2_SIZE_4M		(7L<<0)
+#define PCI_CONFIG_2_BAR2_SIZE_8M		(8L<<0)
+#define PCI_CONFIG_2_BAR2_SIZE_16M		(9L<<0)
+#define PCI_CONFIG_2_BAR2_SIZE_32M		(10L<<0)
+#define PCI_CONFIG_2_BAR2_SIZE_64M		(11L<<0)
+#define PCI_CONFIG_2_BAR2_SIZE_128M		(12L<<0)
+#define PCI_CONFIG_2_BAR2_SIZE_256M		(13L<<0)
+#define PCI_CONFIG_2_BAR2_SIZE_512M		(14L<<0)
+#define PCI_CONFIG_2_BAR2_SIZE_1G		(15L<<0)
+#define PCI_CONFIG_2_BAR2_64ENA 		(1L<<4)
+
+#define PCI_PM_DATA_A					0x410
+#define PCI_PM_DATA_B					0x414
+#define PCI_ID_VAL1					0x434
+#define PCI_ID_VAL2					0x438
 
-#define PCI_PM_DATA_A					(0x410)
-#define PCI_PM_DATA_B					(0x414)
-#define PCI_ID_VAL1					(0x434)
-#define PCI_ID_VAL2					(0x438)
 
 #define MDIO_REG_BANK_CL73_IEEEB0			0x0
 #define MDIO_CL73_IEEEB0_CL73_AN_CONTROL		0x0
@@ -5522,6 +5560,8 @@ Theotherbitsarereservedandshouldbezero*/
 #define MDIO_PMA_REG_GEN_CTRL		0xca10
 #define MDIO_PMA_REG_GEN_CTRL_ROM_RESET_INTERNAL_MP	0x0188
 #define MDIO_PMA_REG_GEN_CTRL_ROM_MICRO_RESET		0x018a
+#define MDIO_PMA_REG_M8051_MSGIN_REG	0xca12
+#define MDIO_PMA_REG_M8051_MSGOUT_REG	0xca13
 #define MDIO_PMA_REG_ROM_VER1		0xca19
 #define MDIO_PMA_REG_ROM_VER2		0xca1a
 #define MDIO_PMA_REG_EDC_FFE_MAIN	0xca1b
@@ -5576,7 +5616,8 @@ Theotherbitsarereservedandshouldbezero*/
 #define MDIO_AN_REG_LINK_STATUS 	0x8304
 #define MDIO_AN_REG_CL37_CL73		0x8370
 #define MDIO_AN_REG_CL37_AN		0xffe0
-#define MDIO_AN_REG_CL37_FD		0xffe4
+#define MDIO_AN_REG_CL37_FC_LD		0xffe4
+#define MDIO_AN_REG_CL37_FC_LP		0xffe5
 
 
 #define IGU_FUNC_BASE			0x0400
@@ -5600,4 +5641,13 @@ Theotherbitsarereservedandshouldbezero*/
 #define IGU_INT_NOP				2
 #define IGU_INT_NOP2			3
 
+#define COMMAND_REG_INT_ACK	    0x0
+#define COMMAND_REG_PROD_UPD	    0x4
+#define COMMAND_REG_ATTN_BITS_UPD   0x8
+#define COMMAND_REG_ATTN_BITS_SET   0xc
+#define COMMAND_REG_ATTN_BITS_CLR   0x10
+#define COMMAND_REG_COALESCE_NOW    0x14
+#define COMMAND_REG_SIMD_MASK	    0x18
+#define COMMAND_REG_SIMD_NOMASK     0x1c
+
 
diff --git a/drivers/net/bonding/bond_3ad.c b/drivers/net/bonding/bond_3ad.c
index ebb539e090c3..6106660a4a44 100644
--- a/drivers/net/bonding/bond_3ad.c
+++ b/drivers/net/bonding/bond_3ad.c
@@ -2107,6 +2107,7 @@ void bond_3ad_state_machine_handler(struct work_struct *work)
 			aggregator = __get_first_agg(port);
 			ad_agg_selection_logic(aggregator);
 		}
+		bond_3ad_set_carrier(bond);
 	}
 
 	// for each port run the state machines
diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c
index a641eeaa2a2f..c792138511e6 100644
--- a/drivers/net/bonding/bond_main.c
+++ b/drivers/net/bonding/bond_main.c
@@ -2223,272 +2223,217 @@ static int bond_slave_info_query(struct net_device *bond_dev, struct ifslave *in
 
 /*-------------------------------- Monitoring -------------------------------*/
 
-/*
- * if !have_locks, return nonzero if a failover is necessary.  if
- * have_locks, do whatever failover activities are needed.
- *
- * This is to separate the inspection and failover steps for locking
- * purposes; failover requires rtnl, but acquiring it for every
- * inspection is undesirable, so a wrapper first does inspection, and
- * the acquires the necessary locks and calls again to perform
- * failover if needed.  Since all locks are dropped, a complete
- * restart is needed between calls.
- */
-static int __bond_mii_monitor(struct bonding *bond, int have_locks)
-{
-	struct slave *slave, *oldcurrent;
-	int do_failover = 0;
-	int i;
-
-	if (bond->slave_cnt == 0)
-		goto out;
 
-	/* we will try to read the link status of each of our slaves, and
-	 * set their IFF_RUNNING flag appropriately. For each slave not
-	 * supporting MII status, we won't do anything so that a user-space
-	 * program could monitor the link itself if needed.
-	 */
-
-	read_lock(&bond->curr_slave_lock);
-	oldcurrent = bond->curr_active_slave;
-	read_unlock(&bond->curr_slave_lock);
+static int bond_miimon_inspect(struct bonding *bond)
+{
+	struct slave *slave;
+	int i, link_state, commit = 0;
 
 	bond_for_each_slave(bond, slave, i) {
-		struct net_device *slave_dev = slave->dev;
-		int link_state;
-		u16 old_speed = slave->speed;
-		u8 old_duplex = slave->duplex;
+		slave->new_link = BOND_LINK_NOCHANGE;
 
-		link_state = bond_check_dev_link(bond, slave_dev, 0);
+		link_state = bond_check_dev_link(bond, slave->dev, 0);
 
 		switch (slave->link) {
-		case BOND_LINK_UP:	/* the link was up */
-			if (link_state == BMSR_LSTATUS) {
-				if (!oldcurrent) {
-					if (!have_locks)
-						return 1;
-					do_failover = 1;
-				}
-				break;
-			} else { /* link going down */
-				slave->link  = BOND_LINK_FAIL;
-				slave->delay = bond->params.downdelay;
-
-				if (slave->link_failure_count < UINT_MAX) {
-					slave->link_failure_count++;
-				}
+		case BOND_LINK_UP:
+			if (link_state)
+				continue;
 
-				if (bond->params.downdelay) {
-					printk(KERN_INFO DRV_NAME
-					       ": %s: link status down for %s "
-					       "interface %s, disabling it in "
-					       "%d ms.\n",
-					       bond->dev->name,
-					       IS_UP(slave_dev)
-					       ? ((bond->params.mode == BOND_MODE_ACTIVEBACKUP)
-						  ? ((slave == oldcurrent)
-						     ? "active " : "backup ")
-						  : "")
-					       : "idle ",
-					       slave_dev->name,
-					       bond->params.downdelay * bond->params.miimon);
-				}
+			slave->link = BOND_LINK_FAIL;
+			slave->delay = bond->params.downdelay;
+			if (slave->delay) {
+				printk(KERN_INFO DRV_NAME
+				       ": %s: link status down for %s"
+				       "interface %s, disabling it in %d ms.\n",
+				       bond->dev->name,
+				       (bond->params.mode ==
+					BOND_MODE_ACTIVEBACKUP) ?
+				       ((slave->state == BOND_STATE_ACTIVE) ?
+					"active " : "backup ") : "",
+				       slave->dev->name,
+				       bond->params.downdelay * bond->params.miimon);
 			}
-			/* no break ! fall through the BOND_LINK_FAIL test to
-			   ensure proper action to be taken
-			*/
-		case BOND_LINK_FAIL:	/* the link has just gone down */
-			if (link_state != BMSR_LSTATUS) {
-				/* link stays down */
-				if (slave->delay <= 0) {
-					if (!have_locks)
-						return 1;
-
-					/* link down for too long time */
-					slave->link = BOND_LINK_DOWN;
-
-					/* in active/backup mode, we must
-					 * completely disable this interface
-					 */
-					if ((bond->params.mode == BOND_MODE_ACTIVEBACKUP) ||
-					    (bond->params.mode == BOND_MODE_8023AD)) {
-						bond_set_slave_inactive_flags(slave);
-					}
-
-					printk(KERN_INFO DRV_NAME
-					       ": %s: link status definitely "
-					       "down for interface %s, "
-					       "disabling it\n",
-					       bond->dev->name,
-					       slave_dev->name);
-
-					/* notify ad that the link status has changed */
-					if (bond->params.mode == BOND_MODE_8023AD) {
-						bond_3ad_handle_link_change(slave, BOND_LINK_DOWN);
-					}
-
-					if ((bond->params.mode == BOND_MODE_TLB) ||
-					    (bond->params.mode == BOND_MODE_ALB)) {
-						bond_alb_handle_link_change(bond, slave, BOND_LINK_DOWN);
-					}
-
-					if (slave == oldcurrent) {
-						do_failover = 1;
-					}
-				} else {
-					slave->delay--;
-				}
-			} else {
-				/* link up again */
-				slave->link  = BOND_LINK_UP;
+			/*FALLTHRU*/
+		case BOND_LINK_FAIL:
+			if (link_state) {
+				/*
+				 * recovered before downdelay expired
+				 */
+				slave->link = BOND_LINK_UP;
 				slave->jiffies = jiffies;
 				printk(KERN_INFO DRV_NAME
 				       ": %s: link status up again after %d "
 				       "ms for interface %s.\n",
 				       bond->dev->name,
-				       (bond->params.downdelay - slave->delay) * bond->params.miimon,
-				       slave_dev->name);
+				       (bond->params.downdelay - slave->delay) *
+				       bond->params.miimon,
+				       slave->dev->name);
+				continue;
 			}
-			break;
-		case BOND_LINK_DOWN:	/* the link was down */
-			if (link_state != BMSR_LSTATUS) {
-				/* the link stays down, nothing more to do */
-				break;
-			} else {	/* link going up */
-				slave->link  = BOND_LINK_BACK;
-				slave->delay = bond->params.updelay;
 
-				if (bond->params.updelay) {
-					/* if updelay == 0, no need to
-					   advertise about a 0 ms delay */
-					printk(KERN_INFO DRV_NAME
-					       ": %s: link status up for "
-					       "interface %s, enabling it "
-					       "in %d ms.\n",
-					       bond->dev->name,
-					       slave_dev->name,
-					       bond->params.updelay * bond->params.miimon);
-				}
+			if (slave->delay <= 0) {
+				slave->new_link = BOND_LINK_DOWN;
+				commit++;
+				continue;
 			}
-			/* no break ! fall through the BOND_LINK_BACK state in
-			   case there's something to do.
-			*/
-		case BOND_LINK_BACK:	/* the link has just come back */
-			if (link_state != BMSR_LSTATUS) {
-				/* link down again */
-				slave->link  = BOND_LINK_DOWN;
 
+			slave->delay--;
+			break;
+
+		case BOND_LINK_DOWN:
+			if (!link_state)
+				continue;
+
+			slave->link = BOND_LINK_BACK;
+			slave->delay = bond->params.updelay;
+
+			if (slave->delay) {
+				printk(KERN_INFO DRV_NAME
+				       ": %s: link status up for "
+				       "interface %s, enabling it in %d ms.\n",
+				       bond->dev->name, slave->dev->name,
+				       bond->params.updelay *
+				       bond->params.miimon);
+			}
+			/*FALLTHRU*/
+		case BOND_LINK_BACK:
+			if (!link_state) {
+				slave->link = BOND_LINK_DOWN;
 				printk(KERN_INFO DRV_NAME
 				       ": %s: link status down again after %d "
 				       "ms for interface %s.\n",
 				       bond->dev->name,
-				       (bond->params.updelay - slave->delay) * bond->params.miimon,
-				       slave_dev->name);
-			} else {
-				/* link stays up */
-				if (slave->delay == 0) {
-					if (!have_locks)
-						return 1;
-
-					/* now the link has been up for long time enough */
-					slave->link = BOND_LINK_UP;
-					slave->jiffies = jiffies;
-
-					if (bond->params.mode == BOND_MODE_8023AD) {
-						/* prevent it from being the active one */
-						slave->state = BOND_STATE_BACKUP;
-					} else if (bond->params.mode != BOND_MODE_ACTIVEBACKUP) {
-						/* make it immediately active */
-						slave->state = BOND_STATE_ACTIVE;
-					} else if (slave != bond->primary_slave) {
-						/* prevent it from being the active one */
-						slave->state = BOND_STATE_BACKUP;
-					}
+				       (bond->params.updelay - slave->delay) *
+				       bond->params.miimon,
+				       slave->dev->name);
 
-					printk(KERN_INFO DRV_NAME
-					       ": %s: link status definitely "
-					       "up for interface %s.\n",
-					       bond->dev->name,
-					       slave_dev->name);
-
-					/* notify ad that the link status has changed */
-					if (bond->params.mode == BOND_MODE_8023AD) {
-						bond_3ad_handle_link_change(slave, BOND_LINK_UP);
-					}
-
-					if ((bond->params.mode == BOND_MODE_TLB) ||
-					    (bond->params.mode == BOND_MODE_ALB)) {
-						bond_alb_handle_link_change(bond, slave, BOND_LINK_UP);
-					}
-
-					if ((!oldcurrent) ||
-					    (slave == bond->primary_slave)) {
-						do_failover = 1;
-					}
-				} else {
-					slave->delay--;
-				}
+				continue;
 			}
+
+			if (slave->delay <= 0) {
+				slave->new_link = BOND_LINK_UP;
+				commit++;
+				continue;
+			}
+
+			slave->delay--;
 			break;
-		default:
-			/* Should not happen */
-			printk(KERN_ERR DRV_NAME
-			       ": %s: Error: %s Illegal value (link=%d)\n",
-			       bond->dev->name,
-			       slave->dev->name,
-			       slave->link);
-			goto out;
-		} /* end of switch (slave->link) */
+		}
+	}
 
-		bond_update_speed_duplex(slave);
+	return commit;
+}
 
-		if (bond->params.mode == BOND_MODE_8023AD) {
-			if (old_speed != slave->speed) {
-				bond_3ad_adapter_speed_changed(slave);
-			}
+static void bond_miimon_commit(struct bonding *bond)
+{
+	struct slave *slave;
+	int i;
+
+	bond_for_each_slave(bond, slave, i) {
+		switch (slave->new_link) {
+		case BOND_LINK_NOCHANGE:
+			continue;
+
+		case BOND_LINK_UP:
+			slave->link = BOND_LINK_UP;
+			slave->jiffies = jiffies;
 
-			if (old_duplex != slave->duplex) {
-				bond_3ad_adapter_duplex_changed(slave);
+			if (bond->params.mode == BOND_MODE_8023AD) {
+				/* prevent it from being the active one */
+				slave->state = BOND_STATE_BACKUP;
+			} else if (bond->params.mode != BOND_MODE_ACTIVEBACKUP) {
+				/* make it immediately active */
+				slave->state = BOND_STATE_ACTIVE;
+			} else if (slave != bond->primary_slave) {
+				/* prevent it from being the active one */
+				slave->state = BOND_STATE_BACKUP;
 			}
-		}
 
-	} /* end of for */
+			printk(KERN_INFO DRV_NAME
+			       ": %s: link status definitely "
+			       "up for interface %s.\n",
+			       bond->dev->name, slave->dev->name);
 
-	if (do_failover) {
-		ASSERT_RTNL();
+			/* notify ad that the link status has changed */
+			if (bond->params.mode == BOND_MODE_8023AD)
+				bond_3ad_handle_link_change(slave, BOND_LINK_UP);
 
-		write_lock_bh(&bond->curr_slave_lock);
+			if ((bond->params.mode == BOND_MODE_TLB) ||
+			    (bond->params.mode == BOND_MODE_ALB))
+				bond_alb_handle_link_change(bond, slave,
+							    BOND_LINK_UP);
 
-		bond_select_active_slave(bond);
+			if (!bond->curr_active_slave ||
+			    (slave == bond->primary_slave))
+				goto do_failover;
 
-		write_unlock_bh(&bond->curr_slave_lock);
+			continue;
 
-	} else
-		bond_set_carrier(bond);
+		case BOND_LINK_DOWN:
+			slave->link = BOND_LINK_DOWN;
 
-out:
-	return 0;
+			if (bond->params.mode == BOND_MODE_ACTIVEBACKUP ||
+			    bond->params.mode == BOND_MODE_8023AD)
+				bond_set_slave_inactive_flags(slave);
+
+			printk(KERN_INFO DRV_NAME
+			       ": %s: link status definitely down for "
+			       "interface %s, disabling it\n",
+			       bond->dev->name, slave->dev->name);
+
+			if (bond->params.mode == BOND_MODE_8023AD)
+				bond_3ad_handle_link_change(slave,
+							    BOND_LINK_DOWN);
+
+			if (bond->params.mode == BOND_MODE_TLB ||
+			    bond->params.mode == BOND_MODE_ALB)
+				bond_alb_handle_link_change(bond, slave,
+							    BOND_LINK_DOWN);
+
+			if (slave == bond->curr_active_slave)
+				goto do_failover;
+
+			continue;
+
+		default:
+			printk(KERN_ERR DRV_NAME
+			       ": %s: invalid new link %d on slave %s\n",
+			       bond->dev->name, slave->new_link,
+			       slave->dev->name);
+			slave->new_link = BOND_LINK_NOCHANGE;
+
+			continue;
+		}
+
+do_failover:
+		ASSERT_RTNL();
+		write_lock_bh(&bond->curr_slave_lock);
+		bond_select_active_slave(bond);
+		write_unlock_bh(&bond->curr_slave_lock);
+	}
+
+	bond_set_carrier(bond);
 }
 
 /*
  * bond_mii_monitor
  *
  * Really a wrapper that splits the mii monitor into two phases: an
- * inspection, then (if inspection indicates something needs to be
- * done) an acquisition of appropriate locks followed by another pass
- * to implement whatever link state changes are indicated.
+ * inspection, then (if inspection indicates something needs to be done)
+ * an acquisition of appropriate locks followed by a commit phase to
+ * implement whatever link state changes are indicated.
  */
 void bond_mii_monitor(struct work_struct *work)
 {
 	struct bonding *bond = container_of(work, struct bonding,
 					    mii_work.work);
-	unsigned long delay;
 
 	read_lock(&bond->lock);
-	if (bond->kill_timers) {
-		read_unlock(&bond->lock);
-		return;
-	}
+	if (bond->kill_timers)
+		goto out;
+
+	if (bond->slave_cnt == 0)
+		goto re_arm;
 
 	if (bond->send_grat_arp) {
 		read_lock(&bond->curr_slave_lock);
@@ -2496,19 +2441,24 @@ void bond_mii_monitor(struct work_struct *work)
 		read_unlock(&bond->curr_slave_lock);
 	}
 
-	if (__bond_mii_monitor(bond, 0)) {
+	if (bond_miimon_inspect(bond)) {
 		read_unlock(&bond->lock);
 		rtnl_lock();
 		read_lock(&bond->lock);
-		__bond_mii_monitor(bond, 1);
+
+		bond_miimon_commit(bond);
+
 		read_unlock(&bond->lock);
 		rtnl_unlock();	/* might sleep, hold no other locks */
 		read_lock(&bond->lock);
 	}
 
-	delay = msecs_to_jiffies(bond->params.miimon);
+re_arm:
+	if (bond->params.miimon)
+		queue_delayed_work(bond->wq, &bond->mii_work,
+				   msecs_to_jiffies(bond->params.miimon));
+out:
 	read_unlock(&bond->lock);
-	queue_delayed_work(bond->wq, &bond->mii_work, delay);
 }
 
 static __be32 bond_glean_dev_ip(struct net_device *dev)
diff --git a/drivers/net/bonding/bond_sysfs.c b/drivers/net/bonding/bond_sysfs.c
index 6caac0ffb2f2..3bdb47382521 100644
--- a/drivers/net/bonding/bond_sysfs.c
+++ b/drivers/net/bonding/bond_sysfs.c
@@ -350,9 +350,6 @@ static ssize_t bonding_store_slaves(struct device *d,
 		if (dev) {
 			printk(KERN_INFO DRV_NAME ": %s: Removing slave %s\n",
 				bond->dev->name, dev->name);
-			if (bond->setup_by_slave)
-				res = bond_release_and_destroy(bond->dev, dev);
-			else
 				res = bond_release(bond->dev, dev);
 			if (res) {
 				ret = res;
diff --git a/drivers/net/cassini.c b/drivers/net/cassini.c
index 83768df27806..f1936d51b458 100644
--- a/drivers/net/cassini.c
+++ b/drivers/net/cassini.c
@@ -576,6 +576,18 @@ static void cas_spare_recover(struct cas *cp, const gfp_t flags)
 	list_for_each_safe(elem, tmp, &list) {
 		cas_page_t *page = list_entry(elem, cas_page_t, list);
 
+		/*
+		 * With the lockless pagecache, cassini buffering scheme gets
+		 * slightly less accurate: we might find that a page has an
+		 * elevated reference count here, due to a speculative ref,
+		 * and skip it as in-use. Ideally we would be able to reclaim
+		 * it. However this would be such a rare case, it doesn't
+		 * matter too much as we should pick it up the next time round.
+		 *
+		 * Importantly, if we find that the page has a refcount of 1
+		 * here (our refcount), then we know it is definitely not inuse
+		 * so we can reuse it.
+		 */
 		if (page_count(page->buffer) > 1)
 			continue;
 
diff --git a/drivers/net/cpmac.c b/drivers/net/cpmac.c
index a7800e559090..ec6b0af3d46b 100644
--- a/drivers/net/cpmac.c
+++ b/drivers/net/cpmac.c
@@ -26,7 +26,6 @@
 #include <linux/errno.h>
 #include <linux/types.h>
 #include <linux/delay.h>
-#include <linux/version.h>
 
 #include <linux/netdevice.h>
 #include <linux/etherdevice.h>
diff --git a/drivers/net/cs89x0.c b/drivers/net/cs89x0.c
index fba87abe78ee..ea6144a9565e 100644
--- a/drivers/net/cs89x0.c
+++ b/drivers/net/cs89x0.c
@@ -189,7 +189,7 @@ static unsigned int netcard_portlist[] __used __initdata = {IXDP2X01_CS8900_VIRT
 static unsigned int cs8900_irq_map[] = {IRQ_IXDP2X01_CS8900, 0, 0, 0};
 #elif defined(CONFIG_ARCH_PNX010X)
 #include <asm/irq.h>
-#include <asm/arch/gpio.h>
+#include <mach/gpio.h>
 #define CIRRUS_DEFAULT_BASE	IO_ADDRESS(EXT_STATIC2_s0_BASE + 0x200000)	/* = Physical address 0x48200000 */
 #define CIRRUS_DEFAULT_IRQ	VH_INTC_INT_NUM_CASCADED_INTERRUPT_1 /* Event inputs bank 1 - ID 35/bit 3 */
 static unsigned int netcard_portlist[] __used __initdata = {CIRRUS_DEFAULT_BASE, 0};
diff --git a/drivers/net/cxgb3/sge.c b/drivers/net/cxgb3/sge.c
index a96331c875e6..1b0861d73ab7 100644
--- a/drivers/net/cxgb3/sge.c
+++ b/drivers/net/cxgb3/sge.c
@@ -386,7 +386,7 @@ static inline int add_one_rx_buf(void *va, unsigned int len,
 	dma_addr_t mapping;
 
 	mapping = pci_map_single(pdev, va, len, PCI_DMA_FROMDEVICE);
-	if (unlikely(pci_dma_mapping_error(mapping)))
+	if (unlikely(pci_dma_mapping_error(pdev, mapping)))
 		return -ENOMEM;
 
 	pci_unmap_addr_set(sd, dma_addr, mapping);
diff --git a/drivers/net/cxgb3/t3_hw.c b/drivers/net/cxgb3/t3_hw.c
index 47d51788a462..04c0e90119af 100644
--- a/drivers/net/cxgb3/t3_hw.c
+++ b/drivers/net/cxgb3/t3_hw.c
@@ -683,7 +683,7 @@ enum {
 	SF_ERASE_SECTOR = 0xd8,	/* erase sector */
 
 	FW_FLASH_BOOT_ADDR = 0x70000,	/* start address of FW in flash */
-	FW_VERS_ADDR = 0x77ffc,    /* flash address holding FW version */
+	FW_VERS_ADDR = 0x7fffc,    /* flash address holding FW version */
 	FW_MIN_SIZE = 8            /* at least version and csum */
 };
 
diff --git a/drivers/net/de620.c b/drivers/net/de620.c
index 3f5190c654cf..d454e143483e 100644
--- a/drivers/net/de620.c
+++ b/drivers/net/de620.c
@@ -488,13 +488,6 @@ static void de620_set_multicast_list(struct net_device *dev)
 {
 	if (dev->mc_count || dev->flags&(IFF_ALLMULTI|IFF_PROMISC))
 	{ /* Enable promiscuous mode */
-		/*
-		 *	We must make the kernel realise we had to move
-		 *	into promisc mode or we start all out war on
-		 *	the cable. - AC
-		 */
-		dev->flags|=IFF_PROMISC;
-
 		de620_set_register(dev, W_TCR, (TCR_DEF & ~RXPBM) | RXALL);
 	}
 	else
diff --git a/drivers/net/dm9000.c b/drivers/net/dm9000.c
index 0b0f1c407a7e..f42c23f42652 100644
--- a/drivers/net/dm9000.c
+++ b/drivers/net/dm9000.c
@@ -1374,6 +1374,11 @@ dm9000_probe(struct platform_device *pdev)
 	for (i = 0; i < 6; i += 2)
 		dm9000_read_eeprom(db, i / 2, ndev->dev_addr+i);
 
+	if (!is_valid_ether_addr(ndev->dev_addr) && pdata != NULL) {
+		mac_src = "platform data";
+		memcpy(ndev->dev_addr, pdata->dev_addr, 6);
+	}
+
 	if (!is_valid_ether_addr(ndev->dev_addr)) {
 		/* try reading from mac */
 		
diff --git a/drivers/net/e100.c b/drivers/net/e100.c
index 1037b1332312..453115acaad2 100644
--- a/drivers/net/e100.c
+++ b/drivers/net/e100.c
@@ -1790,7 +1790,7 @@ static int e100_rx_alloc_skb(struct nic *nic, struct rx *rx)
 	rx->dma_addr = pci_map_single(nic->pdev, rx->skb->data,
 		RFD_BUF_LEN, PCI_DMA_BIDIRECTIONAL);
 
-	if (pci_dma_mapping_error(rx->dma_addr)) {
+	if (pci_dma_mapping_error(nic->pdev, rx->dma_addr)) {
 		dev_kfree_skb_any(rx->skb);
 		rx->skb = NULL;
 		rx->dma_addr = 0;
@@ -1838,7 +1838,7 @@ static int e100_rx_indicate(struct nic *nic, struct rx *rx,
 		if ((le16_to_cpu(rfd->command) & cb_el) &&
 		    (RU_RUNNING == nic->ru_running))
 
-			if (readb(&nic->csr->scb.status) & rus_no_res)
+			if (ioread8(&nic->csr->scb.status) & rus_no_res)
 				nic->ru_running = RU_SUSPENDED;
 		return -ENODATA;
 	}
@@ -1861,7 +1861,7 @@ static int e100_rx_indicate(struct nic *nic, struct rx *rx,
 	if ((le16_to_cpu(rfd->command) & cb_el) &&
 	    (RU_RUNNING == nic->ru_running)) {
 
-	    if (readb(&nic->csr->scb.status) & rus_no_res)
+	    if (ioread8(&nic->csr->scb.status) & rus_no_res)
 		nic->ru_running = RU_SUSPENDED;
 	}
 
diff --git a/drivers/net/e1000/e1000_param.c b/drivers/net/e1000/e1000_param.c
index b9f90a5d3d4d..213437d13154 100644
--- a/drivers/net/e1000/e1000_param.c
+++ b/drivers/net/e1000/e1000_param.c
@@ -208,7 +208,7 @@ struct e1000_option {
 		} r;
 		struct { /* list_option info */
 			int nr;
-			struct e1000_opt_list { int i; char *str; } *p;
+			const struct e1000_opt_list { int i; char *str; } *p;
 		} l;
 	} arg;
 };
@@ -242,7 +242,7 @@ static int __devinit e1000_validate_option(unsigned int *value,
 		break;
 	case list_option: {
 		int i;
-		struct e1000_opt_list *ent;
+		const struct e1000_opt_list *ent;
 
 		for (i = 0; i < opt->arg.l.nr; i++) {
 			ent = &opt->arg.l.p[i];
@@ -279,7 +279,9 @@ static void e1000_check_copper_options(struct e1000_adapter *adapter);
 
 void __devinit e1000_check_options(struct e1000_adapter *adapter)
 {
+	struct e1000_option opt;
 	int bd = adapter->bd_number;
+
 	if (bd >= E1000_MAX_NIC) {
 		DPRINTK(PROBE, NOTICE,
 		       "Warning: no configuration for board #%i\n", bd);
@@ -287,19 +289,21 @@ void __devinit e1000_check_options(struct e1000_adapter *adapter)
 	}
 
 	{ /* Transmit Descriptor Count */
-		struct e1000_option opt = {
+		struct e1000_tx_ring *tx_ring = adapter->tx_ring;
+		int i;
+		e1000_mac_type mac_type = adapter->hw.mac_type;
+
+		opt = (struct e1000_option) {
 			.type = range_option,
 			.name = "Transmit Descriptors",
 			.err  = "using default of "
 				__MODULE_STRING(E1000_DEFAULT_TXD),
 			.def  = E1000_DEFAULT_TXD,
-			.arg  = { .r = { .min = E1000_MIN_TXD }}
+			.arg  = { .r = {
+				.min = E1000_MIN_TXD,
+				.max = mac_type < e1000_82544 ? E1000_MAX_TXD : E1000_MAX_82544_TXD
+				}}
 		};
-		struct e1000_tx_ring *tx_ring = adapter->tx_ring;
-		int i;
-		e1000_mac_type mac_type = adapter->hw.mac_type;
-		opt.arg.r.max = mac_type < e1000_82544 ?
-			E1000_MAX_TXD : E1000_MAX_82544_TXD;
 
 		if (num_TxDescriptors > bd) {
 			tx_ring->count = TxDescriptors[bd];
@@ -313,19 +317,21 @@ void __devinit e1000_check_options(struct e1000_adapter *adapter)
 			tx_ring[i].count = tx_ring->count;
 	}
 	{ /* Receive Descriptor Count */
-		struct e1000_option opt = {
+		struct e1000_rx_ring *rx_ring = adapter->rx_ring;
+		int i;
+		e1000_mac_type mac_type = adapter->hw.mac_type;
+
+		opt = (struct e1000_option) {
 			.type = range_option,
 			.name = "Receive Descriptors",
 			.err  = "using default of "
 				__MODULE_STRING(E1000_DEFAULT_RXD),
 			.def  = E1000_DEFAULT_RXD,
-			.arg  = { .r = { .min = E1000_MIN_RXD }}
+			.arg  = { .r = {
+				.min = E1000_MIN_RXD,
+				.max = mac_type < e1000_82544 ? E1000_MAX_RXD : E1000_MAX_82544_RXD
+			}}
 		};
-		struct e1000_rx_ring *rx_ring = adapter->rx_ring;
-		int i;
-		e1000_mac_type mac_type = adapter->hw.mac_type;
-		opt.arg.r.max = mac_type < e1000_82544 ? E1000_MAX_RXD :
-			E1000_MAX_82544_RXD;
 
 		if (num_RxDescriptors > bd) {
 			rx_ring->count = RxDescriptors[bd];
@@ -339,7 +345,7 @@ void __devinit e1000_check_options(struct e1000_adapter *adapter)
 			rx_ring[i].count = rx_ring->count;
 	}
 	{ /* Checksum Offload Enable/Disable */
-		struct e1000_option opt = {
+		opt = (struct e1000_option) {
 			.type = enable_option,
 			.name = "Checksum Offload",
 			.err  = "defaulting to Enabled",
@@ -363,7 +369,7 @@ void __devinit e1000_check_options(struct e1000_adapter *adapter)
 			 { E1000_FC_FULL,    "Flow Control Enabled" },
 			 { E1000_FC_DEFAULT, "Flow Control Hardware Default" }};
 
-		struct e1000_option opt = {
+		opt = (struct e1000_option) {
 			.type = list_option,
 			.name = "Flow Control",
 			.err  = "reading default settings from EEPROM",
@@ -381,7 +387,7 @@ void __devinit e1000_check_options(struct e1000_adapter *adapter)
 		}
 	}
 	{ /* Transmit Interrupt Delay */
-		struct e1000_option opt = {
+		opt = (struct e1000_option) {
 			.type = range_option,
 			.name = "Transmit Interrupt Delay",
 			.err  = "using default of " __MODULE_STRING(DEFAULT_TIDV),
@@ -399,7 +405,7 @@ void __devinit e1000_check_options(struct e1000_adapter *adapter)
 		}
 	}
 	{ /* Transmit Absolute Interrupt Delay */
-		struct e1000_option opt = {
+		opt = (struct e1000_option) {
 			.type = range_option,
 			.name = "Transmit Absolute Interrupt Delay",
 			.err  = "using default of " __MODULE_STRING(DEFAULT_TADV),
@@ -417,7 +423,7 @@ void __devinit e1000_check_options(struct e1000_adapter *adapter)
 		}
 	}
 	{ /* Receive Interrupt Delay */
-		struct e1000_option opt = {
+		opt = (struct e1000_option) {
 			.type = range_option,
 			.name = "Receive Interrupt Delay",
 			.err  = "using default of " __MODULE_STRING(DEFAULT_RDTR),
@@ -435,7 +441,7 @@ void __devinit e1000_check_options(struct e1000_adapter *adapter)
 		}
 	}
 	{ /* Receive Absolute Interrupt Delay */
-		struct e1000_option opt = {
+		opt = (struct e1000_option) {
 			.type = range_option,
 			.name = "Receive Absolute Interrupt Delay",
 			.err  = "using default of " __MODULE_STRING(DEFAULT_RADV),
@@ -453,7 +459,7 @@ void __devinit e1000_check_options(struct e1000_adapter *adapter)
 		}
 	}
 	{ /* Interrupt Throttling Rate */
-		struct e1000_option opt = {
+		opt = (struct e1000_option) {
 			.type = range_option,
 			.name = "Interrupt Throttling Rate (ints/sec)",
 			.err  = "using default of " __MODULE_STRING(DEFAULT_ITR),
@@ -497,7 +503,7 @@ void __devinit e1000_check_options(struct e1000_adapter *adapter)
 		}
 	}
 	{ /* Smart Power Down */
-		struct e1000_option opt = {
+		opt = (struct e1000_option) {
 			.type = enable_option,
 			.name = "PHY Smart Power Down",
 			.err  = "defaulting to Disabled",
@@ -513,7 +519,7 @@ void __devinit e1000_check_options(struct e1000_adapter *adapter)
 		}
 	}
 	{ /* Kumeran Lock Loss Workaround */
-		struct e1000_option opt = {
+		opt = (struct e1000_option) {
 			.type = enable_option,
 			.name = "Kumeran Lock Loss Workaround",
 			.err  = "defaulting to Enabled",
@@ -578,16 +584,18 @@ static void __devinit e1000_check_fiber_options(struct e1000_adapter *adapter)
 
 static void __devinit e1000_check_copper_options(struct e1000_adapter *adapter)
 {
+	struct e1000_option opt;
 	unsigned int speed, dplx, an;
 	int bd = adapter->bd_number;
 
 	{ /* Speed */
-		struct e1000_opt_list speed_list[] = {{          0, "" },
-						      {   SPEED_10, "" },
-						      {  SPEED_100, "" },
-						      { SPEED_1000, "" }};
+		static const struct e1000_opt_list speed_list[] = {
+			{          0, "" },
+			{   SPEED_10, "" },
+			{  SPEED_100, "" },
+			{ SPEED_1000, "" }};
 
-		struct e1000_option opt = {
+		opt = (struct e1000_option) {
 			.type = list_option,
 			.name = "Speed",
 			.err  = "parameter ignored",
@@ -604,11 +612,12 @@ static void __devinit e1000_check_copper_options(struct e1000_adapter *adapter)
 		}
 	}
 	{ /* Duplex */
-		struct e1000_opt_list dplx_list[] = {{           0, "" },
-						     { HALF_DUPLEX, "" },
-						     { FULL_DUPLEX, "" }};
+		static const struct e1000_opt_list dplx_list[] = {
+			{           0, "" },
+			{ HALF_DUPLEX, "" },
+			{ FULL_DUPLEX, "" }};
 
-		struct e1000_option opt = {
+		opt = (struct e1000_option) {
 			.type = list_option,
 			.name = "Duplex",
 			.err  = "parameter ignored",
@@ -637,7 +646,7 @@ static void __devinit e1000_check_copper_options(struct e1000_adapter *adapter)
 		       "parameter ignored\n");
 		adapter->hw.autoneg_advertised = AUTONEG_ADV_DEFAULT;
 	} else { /* Autoneg */
-		struct e1000_opt_list an_list[] =
+		static const struct e1000_opt_list an_list[] =
 			#define AA "AutoNeg advertising "
 			{{ 0x01, AA "10/HD" },
 			 { 0x02, AA "10/FD" },
@@ -671,7 +680,7 @@ static void __devinit e1000_check_copper_options(struct e1000_adapter *adapter)
 			 { 0x2e, AA "1000/FD, 100/FD, 100/HD, 10/FD" },
 			 { 0x2f, AA "1000/FD, 100/FD, 100/HD, 10/FD, 10/HD" }};
 
-		struct e1000_option opt = {
+		opt = (struct e1000_option) {
 			.type = list_option,
 			.name = "AutoNeg",
 			.err  = "parameter ignored",
diff --git a/drivers/net/e1000e/defines.h b/drivers/net/e1000e/defines.h
index f823b8ba5785..14b0e6cd3b8d 100644
--- a/drivers/net/e1000e/defines.h
+++ b/drivers/net/e1000e/defines.h
@@ -389,7 +389,7 @@
 
 /* Interrupt Cause Set */
 #define E1000_ICS_LSC       E1000_ICR_LSC       /* Link Status Change */
-#define E1000_ICS_RXDMT0    E1000_ICR_RXDMT0    /* rx desc min. threshold */
+#define E1000_ICS_RXSEQ     E1000_ICR_RXSEQ     /* Rx sequence error */
 #define E1000_ICS_RXDMT0    E1000_ICR_RXDMT0    /* Rx desc min. threshold */
 
 /* Transmit Descriptor Control */
diff --git a/drivers/net/e1000e/e1000.h b/drivers/net/e1000e/e1000.h
index 4a4f62e002b2..ac4e506b4f88 100644
--- a/drivers/net/e1000e/e1000.h
+++ b/drivers/net/e1000e/e1000.h
@@ -41,24 +41,25 @@
 
 struct e1000_info;
 
-#define ndev_printk(level, netdev, format, arg...) \
-	printk(level "%s: " format, (netdev)->name, ## arg)
+#define e_printk(level, adapter, format, arg...) \
+	printk(level "%s: %s: " format, pci_name(adapter->pdev), \
+	       adapter->netdev->name, ## arg)
 
 #ifdef DEBUG
-#define ndev_dbg(netdev, format, arg...) \
-	ndev_printk(KERN_DEBUG , netdev, format, ## arg)
+#define e_dbg(format, arg...) \
+	e_printk(KERN_DEBUG , adapter, format, ## arg)
 #else
-#define ndev_dbg(netdev, format, arg...) do { (void)(netdev); } while (0)
+#define e_dbg(format, arg...) do { (void)(adapter); } while (0)
 #endif
 
-#define ndev_err(netdev, format, arg...) \
-	ndev_printk(KERN_ERR , netdev, format, ## arg)
-#define ndev_info(netdev, format, arg...) \
-	ndev_printk(KERN_INFO , netdev, format, ## arg)
-#define ndev_warn(netdev, format, arg...) \
-	ndev_printk(KERN_WARNING , netdev, format, ## arg)
-#define ndev_notice(netdev, format, arg...) \
-	ndev_printk(KERN_NOTICE , netdev, format, ## arg)
+#define e_err(format, arg...) \
+	e_printk(KERN_ERR, adapter, format, ## arg)
+#define e_info(format, arg...) \
+	e_printk(KERN_INFO, adapter, format, ## arg)
+#define e_warn(format, arg...) \
+	e_printk(KERN_WARNING, adapter, format, ## arg)
+#define e_notice(format, arg...) \
+	e_printk(KERN_NOTICE, adapter, format, ## arg)
 
 
 /* Tx/Rx descriptor defines */
@@ -283,10 +284,6 @@ struct e1000_adapter {
 	unsigned long led_status;
 
 	unsigned int flags;
-
-	/* for ioport free */
-	int bars;
-	int need_ioport;
 };
 
 struct e1000_info {
@@ -329,6 +326,7 @@ struct e1000_info {
 #define FLAG_RX_CSUM_ENABLED              (1 << 28)
 #define FLAG_TSO_FORCE                    (1 << 29)
 #define FLAG_RX_RESTART_NOW               (1 << 30)
+#define FLAG_MSI_TEST_FAILED              (1 << 31)
 
 #define E1000_RX_DESC_PS(R, i)	    \
 	(&(((union e1000_rx_desc_packet_split *)((R).desc))[i]))
diff --git a/drivers/net/e1000e/ethtool.c b/drivers/net/e1000e/ethtool.c
index a14561f40db0..e21c9e0f3738 100644
--- a/drivers/net/e1000e/ethtool.c
+++ b/drivers/net/e1000e/ethtool.c
@@ -177,7 +177,7 @@ static u32 e1000_get_link(struct net_device *netdev)
 	u32 status;
 	
 	status = er32(STATUS);
-	return (status & E1000_STATUS_LU);
+	return (status & E1000_STATUS_LU) ? 1 : 0;
 }
 
 static int e1000_set_spd_dplx(struct e1000_adapter *adapter, u16 spddplx)
@@ -189,8 +189,7 @@ static int e1000_set_spd_dplx(struct e1000_adapter *adapter, u16 spddplx)
 	/* Fiber NICs only allow 1000 gbps Full duplex */
 	if ((adapter->hw.phy.media_type == e1000_media_type_fiber) &&
 		spddplx != (SPEED_1000 + DUPLEX_FULL)) {
-		ndev_err(adapter->netdev, "Unsupported Speed/Duplex "
-			 "configuration\n");
+		e_err("Unsupported Speed/Duplex configuration\n");
 		return -EINVAL;
 	}
 
@@ -213,8 +212,7 @@ static int e1000_set_spd_dplx(struct e1000_adapter *adapter, u16 spddplx)
 		break;
 	case SPEED_1000 + DUPLEX_HALF: /* not supported */
 	default:
-		ndev_err(adapter->netdev, "Unsupported Speed/Duplex "
-			 "configuration\n");
+		e_err("Unsupported Speed/Duplex configuration\n");
 		return -EINVAL;
 	}
 	return 0;
@@ -231,8 +229,8 @@ static int e1000_set_settings(struct net_device *netdev,
 	 * cannot be changed
 	 */
 	if (e1000_check_reset_block(hw)) {
-		ndev_err(netdev, "Cannot change link "
-			 "characteristics when SoL/IDER is active.\n");
+		e_err("Cannot change link characteristics when SoL/IDER is "
+		      "active.\n");
 		return -EINVAL;
 	}
 
@@ -380,8 +378,7 @@ static int e1000_set_tso(struct net_device *netdev, u32 data)
 		netdev->features &= ~NETIF_F_TSO6;
 	}
 
-	ndev_info(netdev, "TSO is %s\n",
-		  data ? "Enabled" : "Disabled");
+	e_info("TSO is %s\n", data ? "Enabled" : "Disabled");
 	adapter->flags |= FLAG_TSO_FORCE;
 	return 0;
 }
@@ -722,10 +719,9 @@ static bool reg_pattern_test(struct e1000_adapter *adapter, u64 *data,
 				      (test[pat] & write));
 		val = E1000_READ_REG_ARRAY(&adapter->hw, reg, offset);
 		if (val != (test[pat] & write & mask)) {
-			ndev_err(adapter->netdev, "pattern test reg %04X "
-				 "failed: got 0x%08X expected 0x%08X\n",
-				 reg + offset,
-				 val, (test[pat] & write & mask));
+			e_err("pattern test reg %04X failed: got 0x%08X "
+			      "expected 0x%08X\n", reg + offset, val,
+			      (test[pat] & write & mask));
 			*data = reg;
 			return 1;
 		}
@@ -740,9 +736,8 @@ static bool reg_set_and_check(struct e1000_adapter *adapter, u64 *data,
 	__ew32(&adapter->hw, reg, write & mask);
 	val = __er32(&adapter->hw, reg);
 	if ((write & mask) != (val & mask)) {
-		ndev_err(adapter->netdev, "set/check reg %04X test failed: "
-			 "got 0x%08X expected 0x%08X\n", reg, (val & mask),
-			 (write & mask));
+		e_err("set/check reg %04X test failed: got 0x%08X "
+		      "expected 0x%08X\n", reg, (val & mask), (write & mask));
 		*data = reg;
 		return 1;
 	}
@@ -766,7 +761,6 @@ static int e1000_reg_test(struct e1000_adapter *adapter, u64 *data)
 {
 	struct e1000_hw *hw = &adapter->hw;
 	struct e1000_mac_info *mac = &adapter->hw.mac;
-	struct net_device *netdev = adapter->netdev;
 	u32 value;
 	u32 before;
 	u32 after;
@@ -799,8 +793,8 @@ static int e1000_reg_test(struct e1000_adapter *adapter, u64 *data)
 	ew32(STATUS, toggle);
 	after = er32(STATUS) & toggle;
 	if (value != after) {
-		ndev_err(netdev, "failed STATUS register test got: "
-			 "0x%08X expected: 0x%08X\n", after, value);
+		e_err("failed STATUS register test got: 0x%08X expected: "
+		      "0x%08X\n", after, value);
 		*data = 1;
 		return 1;
 	}
@@ -903,8 +897,7 @@ static int e1000_intr_test(struct e1000_adapter *adapter, u64 *data)
 		*data = 1;
 		return -1;
 	}
-	ndev_info(netdev, "testing %s interrupt\n",
-		  (shared_int ? "shared" : "unshared"));
+	e_info("testing %s interrupt\n", (shared_int ? "shared" : "unshared"));
 
 	/* Disable all the interrupts */
 	ew32(IMC, 0xFFFFFFFF);
@@ -1090,7 +1083,7 @@ static int e1000_setup_desc_rings(struct e1000_adapter *adapter)
 		tx_ring->buffer_info[i].dma =
 			pci_map_single(pdev, skb->data, skb->len,
 				       PCI_DMA_TODEVICE);
-		if (pci_dma_mapping_error(tx_ring->buffer_info[i].dma)) {
+		if (pci_dma_mapping_error(pdev, tx_ring->buffer_info[i].dma)) {
 			ret_val = 4;
 			goto err_nomem;
 		}
@@ -1153,7 +1146,7 @@ static int e1000_setup_desc_rings(struct e1000_adapter *adapter)
 		rx_ring->buffer_info[i].dma =
 			pci_map_single(pdev, skb->data, 2048,
 				       PCI_DMA_FROMDEVICE);
-		if (pci_dma_mapping_error(rx_ring->buffer_info[i].dma)) {
+		if (pci_dma_mapping_error(pdev, rx_ring->buffer_info[i].dma)) {
 			ret_val = 8;
 			goto err_nomem;
 		}
@@ -1526,8 +1519,7 @@ static int e1000_loopback_test(struct e1000_adapter *adapter, u64 *data)
 	 * sessions are active
 	 */
 	if (e1000_check_reset_block(&adapter->hw)) {
-		ndev_err(adapter->netdev, "Cannot do PHY loopback test "
-			 "when SoL/IDER is active.\n");
+		e_err("Cannot do PHY loopback test when SoL/IDER is active.\n");
 		*data = 0;
 		goto out;
 	}
@@ -1612,7 +1604,7 @@ static void e1000_diag_test(struct net_device *netdev,
 		forced_speed_duplex = adapter->hw.mac.forced_speed_duplex;
 		autoneg = adapter->hw.mac.autoneg;
 
-		ndev_info(netdev, "offline testing starting\n");
+		e_info("offline testing starting\n");
 
 		/*
 		 * Link test performed before hardware reset so autoneg doesn't
@@ -1658,7 +1650,7 @@ static void e1000_diag_test(struct net_device *netdev,
 		if (if_running)
 			dev_open(netdev);
 	} else {
-		ndev_info(netdev, "online testing starting\n");
+		e_info("online testing starting\n");
 		/* Online tests */
 		if (e1000_link_test(adapter, &data[4]))
 			eth_test->flags |= ETH_TEST_FL_FAILED;
@@ -1694,8 +1686,8 @@ static void e1000_get_wol(struct net_device *netdev,
 		wol->supported &= ~WAKE_UCAST;
 
 		if (adapter->wol & E1000_WUFC_EX)
-			ndev_err(netdev, "Interface does not support "
-				 "directed (unicast) frame wake-up packets\n");
+			e_err("Interface does not support directed (unicast) "
+			      "frame wake-up packets\n");
 	}
 
 	if (adapter->wol & E1000_WUFC_EX)
diff --git a/drivers/net/e1000e/netdev.c b/drivers/net/e1000e/netdev.c
index 9c0f56b3c518..d266510c8a94 100644
--- a/drivers/net/e1000e/netdev.c
+++ b/drivers/net/e1000e/netdev.c
@@ -195,7 +195,7 @@ map_skb:
 		buffer_info->dma = pci_map_single(pdev, skb->data,
 						  adapter->rx_buffer_len,
 						  PCI_DMA_FROMDEVICE);
-		if (pci_dma_mapping_error(buffer_info->dma)) {
+		if (pci_dma_mapping_error(pdev, buffer_info->dma)) {
 			dev_err(&pdev->dev, "RX DMA map failed\n");
 			adapter->rx_dma_failed++;
 			break;
@@ -265,7 +265,7 @@ static void e1000_alloc_rx_buffers_ps(struct e1000_adapter *adapter,
 						   ps_page->page,
 						   0, PAGE_SIZE,
 						   PCI_DMA_FROMDEVICE);
-				if (pci_dma_mapping_error(ps_page->dma)) {
+				if (pci_dma_mapping_error(pdev, ps_page->dma)) {
 					dev_err(&adapter->pdev->dev,
 					  "RX DMA page map failed\n");
 					adapter->rx_dma_failed++;
@@ -300,7 +300,7 @@ static void e1000_alloc_rx_buffers_ps(struct e1000_adapter *adapter,
 		buffer_info->dma = pci_map_single(pdev, skb->data,
 						  adapter->rx_ps_bsize0,
 						  PCI_DMA_FROMDEVICE);
-		if (pci_dma_mapping_error(buffer_info->dma)) {
+		if (pci_dma_mapping_error(pdev, buffer_info->dma)) {
 			dev_err(&pdev->dev, "RX DMA map failed\n");
 			adapter->rx_dma_failed++;
 			/* cleanup skb */
@@ -484,8 +484,8 @@ static bool e1000_clean_rx_irq(struct e1000_adapter *adapter,
 		 * packet, also make sure the frame isn't just CRC only */
 		if (!(status & E1000_RXD_STAT_EOP) || (length <= 4)) {
 			/* All receives must fit into a single buffer */
-			ndev_dbg(netdev, "%s: Receive packet consumed "
-				 "multiple buffers\n", netdev->name);
+			e_dbg("%s: Receive packet consumed multiple buffers\n",
+			      netdev->name);
 			/* recycle */
 			buffer_info->skb = skb;
 			goto next_desc;
@@ -510,9 +510,12 @@ static bool e1000_clean_rx_irq(struct e1000_adapter *adapter,
 			    netdev_alloc_skb(netdev, length + NET_IP_ALIGN);
 			if (new_skb) {
 				skb_reserve(new_skb, NET_IP_ALIGN);
-				memcpy(new_skb->data - NET_IP_ALIGN,
-				       skb->data - NET_IP_ALIGN,
-				       length + NET_IP_ALIGN);
+				skb_copy_to_linear_data_offset(new_skb,
+							       -NET_IP_ALIGN,
+							       (skb->data -
+								NET_IP_ALIGN),
+							       (length +
+								NET_IP_ALIGN));
 				/* save the skb in buffer_info as good */
 				buffer_info->skb = skb;
 				skb = new_skb;
@@ -576,28 +579,26 @@ static void e1000_print_tx_hang(struct e1000_adapter *adapter)
 	unsigned int i = tx_ring->next_to_clean;
 	unsigned int eop = tx_ring->buffer_info[i].next_to_watch;
 	struct e1000_tx_desc *eop_desc = E1000_TX_DESC(*tx_ring, eop);
-	struct net_device *netdev = adapter->netdev;
 
 	/* detected Tx unit hang */
-	ndev_err(netdev,
-		 "Detected Tx Unit Hang:\n"
-		 "  TDH                  <%x>\n"
-		 "  TDT                  <%x>\n"
-		 "  next_to_use          <%x>\n"
-		 "  next_to_clean        <%x>\n"
-		 "buffer_info[next_to_clean]:\n"
-		 "  time_stamp           <%lx>\n"
-		 "  next_to_watch        <%x>\n"
-		 "  jiffies              <%lx>\n"
-		 "  next_to_watch.status <%x>\n",
-		 readl(adapter->hw.hw_addr + tx_ring->head),
-		 readl(adapter->hw.hw_addr + tx_ring->tail),
-		 tx_ring->next_to_use,
-		 tx_ring->next_to_clean,
-		 tx_ring->buffer_info[eop].time_stamp,
-		 eop,
-		 jiffies,
-		 eop_desc->upper.fields.status);
+	e_err("Detected Tx Unit Hang:\n"
+	      "  TDH                  <%x>\n"
+	      "  TDT                  <%x>\n"
+	      "  next_to_use          <%x>\n"
+	      "  next_to_clean        <%x>\n"
+	      "buffer_info[next_to_clean]:\n"
+	      "  time_stamp           <%lx>\n"
+	      "  next_to_watch        <%x>\n"
+	      "  jiffies              <%lx>\n"
+	      "  next_to_watch.status <%x>\n",
+	      readl(adapter->hw.hw_addr + tx_ring->head),
+	      readl(adapter->hw.hw_addr + tx_ring->tail),
+	      tx_ring->next_to_use,
+	      tx_ring->next_to_clean,
+	      tx_ring->buffer_info[eop].time_stamp,
+	      eop,
+	      jiffies,
+	      eop_desc->upper.fields.status);
 }
 
 /**
@@ -747,8 +748,8 @@ static bool e1000_clean_rx_irq_ps(struct e1000_adapter *adapter,
 		buffer_info->dma = 0;
 
 		if (!(staterr & E1000_RXD_STAT_EOP)) {
-			ndev_dbg(netdev, "%s: Packet Split buffers didn't pick "
-				 "up the full packet\n", netdev->name);
+			e_dbg("%s: Packet Split buffers didn't pick up the "
+			      "full packet\n", netdev->name);
 			dev_kfree_skb_irq(skb);
 			goto next_desc;
 		}
@@ -761,8 +762,8 @@ static bool e1000_clean_rx_irq_ps(struct e1000_adapter *adapter,
 		length = le16_to_cpu(rx_desc->wb.middle.length0);
 
 		if (!length) {
-			ndev_dbg(netdev, "%s: Last part of the packet spanning"
-				 " multiple descriptors\n", netdev->name);
+			e_dbg("%s: Last part of the packet spanning multiple "
+			      "descriptors\n", netdev->name);
 			dev_kfree_skb_irq(skb);
 			goto next_desc;
 		}
@@ -1011,7 +1012,7 @@ static bool e1000_clean_jumbo_rx_irq(struct e1000_adapter *adapter,
 
 		/* eth type trans needs skb->data to point to something */
 		if (!pskb_may_pull(skb, ETH_HLEN)) {
-			ndev_err(netdev, "pskb_may_pull failed.\n");
+			e_err("pskb_may_pull failed.\n");
 			dev_kfree_skb(skb);
 			goto next_desc;
 		}
@@ -1235,28 +1236,36 @@ static irqreturn_t e1000_intr(int irq, void *data)
 	return IRQ_HANDLED;
 }
 
+/**
+ * e1000_request_irq - initialize interrupts
+ *
+ * Attempts to configure interrupts using the best available
+ * capabilities of the hardware and kernel.
+ **/
 static int e1000_request_irq(struct e1000_adapter *adapter)
 {
 	struct net_device *netdev = adapter->netdev;
-	irq_handler_t handler = e1000_intr;
 	int irq_flags = IRQF_SHARED;
 	int err;
 
-	if (!pci_enable_msi(adapter->pdev)) {
-		adapter->flags |= FLAG_MSI_ENABLED;
-		handler = e1000_intr_msi;
-		irq_flags = 0;
+	if (!(adapter->flags & FLAG_MSI_TEST_FAILED)) {
+		err = pci_enable_msi(adapter->pdev);
+		if (!err) {
+			adapter->flags |= FLAG_MSI_ENABLED;
+			irq_flags = 0;
+		}
 	}
 
-	err = request_irq(adapter->pdev->irq, handler, irq_flags, netdev->name,
-			  netdev);
+	err = request_irq(adapter->pdev->irq,
+			  ((adapter->flags & FLAG_MSI_ENABLED) ?
+				&e1000_intr_msi : &e1000_intr),
+			  irq_flags, netdev->name, netdev);
 	if (err) {
-		ndev_err(netdev,
-		       "Unable to allocate %s interrupt (return: %d)\n",
-			adapter->flags & FLAG_MSI_ENABLED ? "MSI":"INTx",
-			err);
-		if (adapter->flags & FLAG_MSI_ENABLED)
+		if (adapter->flags & FLAG_MSI_ENABLED) {
 			pci_disable_msi(adapter->pdev);
+			adapter->flags &= ~FLAG_MSI_ENABLED;
+		}
+		e_err("Unable to allocate interrupt, Error: %d\n", err);
 	}
 
 	return err;
@@ -1395,8 +1404,7 @@ int e1000e_setup_tx_resources(struct e1000_adapter *adapter)
 	return 0;
 err:
 	vfree(tx_ring->buffer_info);
-	ndev_err(adapter->netdev,
-	"Unable to allocate memory for the transmit descriptor ring\n");
+	e_err("Unable to allocate memory for the transmit descriptor ring\n");
 	return err;
 }
 
@@ -1450,8 +1458,7 @@ err_pages:
 	}
 err:
 	vfree(rx_ring->buffer_info);
-	ndev_err(adapter->netdev,
-	"Unable to allocate memory for the transmit descriptor ring\n");
+	e_err("Unable to allocate memory for the transmit descriptor ring\n");
 	return err;
 }
 
@@ -2450,13 +2457,13 @@ void e1000e_reset(struct e1000_adapter *adapter)
 	 * For parts with AMT enabled, let the firmware know
 	 * that the network interface is in control
 	 */
-	if ((adapter->flags & FLAG_HAS_AMT) && e1000e_check_mng_mode(hw))
+	if (adapter->flags & FLAG_HAS_AMT)
 		e1000_get_hw_control(adapter);
 
 	ew32(WUC, 0);
 
 	if (mac->ops.init_hw(hw))
-		ndev_err(adapter->netdev, "Hardware Error\n");
+		e_err("Hardware Error\n");
 
 	e1000_update_mng_vlan(adapter);
 
@@ -2591,13 +2598,142 @@ static int __devinit e1000_sw_init(struct e1000_adapter *adapter)
 	return 0;
 
 err:
-	ndev_err(netdev, "Unable to allocate memory for queues\n");
+	e_err("Unable to allocate memory for queues\n");
 	kfree(adapter->rx_ring);
 	kfree(adapter->tx_ring);
 	return -ENOMEM;
 }
 
 /**
+ * e1000_intr_msi_test - Interrupt Handler
+ * @irq: interrupt number
+ * @data: pointer to a network interface device structure
+ **/
+static irqreturn_t e1000_intr_msi_test(int irq, void *data)
+{
+	struct net_device *netdev = data;
+	struct e1000_adapter *adapter = netdev_priv(netdev);
+	struct e1000_hw *hw = &adapter->hw;
+	u32 icr = er32(ICR);
+
+	e_dbg("%s: icr is %08X\n", netdev->name, icr);
+	if (icr & E1000_ICR_RXSEQ) {
+		adapter->flags &= ~FLAG_MSI_TEST_FAILED;
+		wmb();
+	}
+
+	return IRQ_HANDLED;
+}
+
+/**
+ * e1000_test_msi_interrupt - Returns 0 for successful test
+ * @adapter: board private struct
+ *
+ * code flow taken from tg3.c
+ **/
+static int e1000_test_msi_interrupt(struct e1000_adapter *adapter)
+{
+	struct net_device *netdev = adapter->netdev;
+	struct e1000_hw *hw = &adapter->hw;
+	int err;
+
+	/* poll_enable hasn't been called yet, so don't need disable */
+	/* clear any pending events */
+	er32(ICR);
+
+	/* free the real vector and request a test handler */
+	e1000_free_irq(adapter);
+
+	/* Assume that the test fails, if it succeeds then the test
+	 * MSI irq handler will unset this flag */
+	adapter->flags |= FLAG_MSI_TEST_FAILED;
+
+	err = pci_enable_msi(adapter->pdev);
+	if (err)
+		goto msi_test_failed;
+
+	err = request_irq(adapter->pdev->irq, &e1000_intr_msi_test, 0,
+			  netdev->name, netdev);
+	if (err) {
+		pci_disable_msi(adapter->pdev);
+		goto msi_test_failed;
+	}
+
+	wmb();
+
+	e1000_irq_enable(adapter);
+
+	/* fire an unusual interrupt on the test handler */
+	ew32(ICS, E1000_ICS_RXSEQ);
+	e1e_flush();
+	msleep(50);
+
+	e1000_irq_disable(adapter);
+
+	rmb();
+
+	if (adapter->flags & FLAG_MSI_TEST_FAILED) {
+		err = -EIO;
+		e_info("MSI interrupt test failed!\n");
+	}
+
+	free_irq(adapter->pdev->irq, netdev);
+	pci_disable_msi(adapter->pdev);
+
+	if (err == -EIO)
+		goto msi_test_failed;
+
+	/* okay so the test worked, restore settings */
+	e_dbg("%s: MSI interrupt test succeeded!\n", netdev->name);
+msi_test_failed:
+	/* restore the original vector, even if it failed */
+	e1000_request_irq(adapter);
+	return err;
+}
+
+/**
+ * e1000_test_msi - Returns 0 if MSI test succeeds or INTx mode is restored
+ * @adapter: board private struct
+ *
+ * code flow taken from tg3.c, called with e1000 interrupts disabled.
+ **/
+static int e1000_test_msi(struct e1000_adapter *adapter)
+{
+	int err;
+	u16 pci_cmd;
+
+	if (!(adapter->flags & FLAG_MSI_ENABLED))
+		return 0;
+
+	/* disable SERR in case the MSI write causes a master abort */
+	pci_read_config_word(adapter->pdev, PCI_COMMAND, &pci_cmd);
+	pci_write_config_word(adapter->pdev, PCI_COMMAND,
+			      pci_cmd & ~PCI_COMMAND_SERR);
+
+	err = e1000_test_msi_interrupt(adapter);
+
+	/* restore previous setting of command word */
+	pci_write_config_word(adapter->pdev, PCI_COMMAND, pci_cmd);
+
+	/* success ! */
+	if (!err)
+		return 0;
+
+	/* EIO means MSI test failed */
+	if (err != -EIO)
+		return err;
+
+	/* back to INTx mode */
+	e_warn("MSI interrupt test failed, using legacy interrupt.\n");
+
+	e1000_free_irq(adapter);
+
+	err = e1000_request_irq(adapter);
+
+	return err;
+}
+
+/**
  * e1000_open - Called when a network interface is made active
  * @netdev: network interface device structure
  *
@@ -2640,8 +2776,7 @@ static int e1000_open(struct net_device *netdev)
 	 * If AMT is enabled, let the firmware know that the network
 	 * interface is now open
 	 */
-	if ((adapter->flags & FLAG_HAS_AMT) &&
-	    e1000e_check_mng_mode(&adapter->hw))
+	if (adapter->flags & FLAG_HAS_AMT)
 		e1000_get_hw_control(adapter);
 
 	/*
@@ -2656,6 +2791,19 @@ static int e1000_open(struct net_device *netdev)
 	if (err)
 		goto err_req_irq;
 
+	/*
+	 * Work around PCIe errata with MSI interrupts causing some chipsets to
+	 * ignore e1000e MSI messages, which means we need to test our MSI
+	 * interrupt now
+	 */
+	{
+		err = e1000_test_msi(adapter);
+		if (err) {
+			e_err("Interrupt allocation failed\n");
+			goto err_req_irq;
+		}
+	}
+
 	/* From here on the code is the same as e1000e_up() */
 	clear_bit(__E1000_DOWN, &adapter->state);
 
@@ -2719,8 +2867,7 @@ static int e1000_close(struct net_device *netdev)
 	 * If AMT is enabled, let the firmware know that the network
 	 * interface is now closed
 	 */
-	if ((adapter->flags & FLAG_HAS_AMT) &&
-	    e1000e_check_mng_mode(&adapter->hw))
+	if (adapter->flags & FLAG_HAS_AMT)
 		e1000_release_hw_control(adapter);
 
 	return 0;
@@ -2917,8 +3064,7 @@ static void e1000_phy_read_status(struct e1000_adapter *adapter)
 		ret_val |= e1e_rphy(hw, PHY_1000T_STATUS, &phy->stat1000);
 		ret_val |= e1e_rphy(hw, PHY_EXT_STATUS, &phy->estatus);
 		if (ret_val)
-			ndev_warn(adapter->netdev,
-				  "Error reading PHY register\n");
+			e_warn("Error reading PHY register\n");
 	} else {
 		/*
 		 * Do not read PHY registers if link is not up
@@ -2943,18 +3089,16 @@ static void e1000_phy_read_status(struct e1000_adapter *adapter)
 static void e1000_print_link_info(struct e1000_adapter *adapter)
 {
 	struct e1000_hw *hw = &adapter->hw;
-	struct net_device *netdev = adapter->netdev;
 	u32 ctrl = er32(CTRL);
 
-	ndev_info(netdev,
-		"Link is Up %d Mbps %s, Flow Control: %s\n",
-		adapter->link_speed,
-		(adapter->link_duplex == FULL_DUPLEX) ?
-				"Full Duplex" : "Half Duplex",
-		((ctrl & E1000_CTRL_TFCE) && (ctrl & E1000_CTRL_RFCE)) ?
-				"RX/TX" :
-		((ctrl & E1000_CTRL_RFCE) ? "RX" :
-		((ctrl & E1000_CTRL_TFCE) ? "TX" : "None" )));
+	e_info("Link is Up %d Mbps %s, Flow Control: %s\n",
+	       adapter->link_speed,
+	       (adapter->link_duplex == FULL_DUPLEX) ?
+	                        "Full Duplex" : "Half Duplex",
+	       ((ctrl & E1000_CTRL_TFCE) && (ctrl & E1000_CTRL_RFCE)) ?
+	                        "RX/TX" :
+	       ((ctrl & E1000_CTRL_RFCE) ? "RX" :
+	       ((ctrl & E1000_CTRL_TFCE) ? "TX" : "None" )));
 }
 
 static bool e1000_has_link(struct e1000_adapter *adapter)
@@ -2994,8 +3138,7 @@ static bool e1000_has_link(struct e1000_adapter *adapter)
 	if ((ret_val == E1000_ERR_PHY) && (hw->phy.type == e1000_phy_igp_3) &&
 	    (er32(CTRL) & E1000_PHY_CTRL_GBE_DISABLE)) {
 		/* See e1000_kmrn_lock_loss_workaround_ich8lan() */
-		ndev_info(adapter->netdev,
-			  "Gigabit has been disabled, downgrading speed\n");
+		e_info("Gigabit has been disabled, downgrading speed\n");
 	}
 
 	return link_active;
@@ -3067,7 +3210,7 @@ static void e1000_watchdog_task(struct work_struct *work)
 			case SPEED_10:
 				txb2b = 0;
 				netdev->tx_queue_len = 10;
-				adapter->tx_timeout_factor = 14;
+				adapter->tx_timeout_factor = 16;
 				break;
 			case SPEED_100:
 				txb2b = 0;
@@ -3096,8 +3239,7 @@ static void e1000_watchdog_task(struct work_struct *work)
 				switch (adapter->link_speed) {
 				case SPEED_10:
 				case SPEED_100:
-					ndev_info(netdev,
-					"10/100 speed: disabling TSO\n");
+					e_info("10/100 speed: disabling TSO\n");
 					netdev->features &= ~NETIF_F_TSO;
 					netdev->features &= ~NETIF_F_TSO6;
 					break;
@@ -3130,7 +3272,7 @@ static void e1000_watchdog_task(struct work_struct *work)
 		if (netif_carrier_ok(netdev)) {
 			adapter->link_speed = 0;
 			adapter->link_duplex = 0;
-			ndev_info(netdev, "Link is Down\n");
+			e_info("Link is Down\n");
 			netif_carrier_off(netdev);
 			netif_tx_stop_all_queues(netdev);
 			if (!test_bit(__E1000_DOWN, &adapter->state))
@@ -3344,7 +3486,7 @@ static int e1000_tx_map(struct e1000_adapter *adapter,
 				skb->data + offset,
 				size,
 				PCI_DMA_TODEVICE);
-		if (pci_dma_mapping_error(buffer_info->dma)) {
+		if (pci_dma_mapping_error(adapter->pdev, buffer_info->dma)) {
 			dev_err(&adapter->pdev->dev, "TX DMA map failed\n");
 			adapter->tx_dma_failed++;
 			return -1;
@@ -3382,7 +3524,8 @@ static int e1000_tx_map(struct e1000_adapter *adapter,
 					offset,
 					size,
 					PCI_DMA_TODEVICE);
-			if (pci_dma_mapping_error(buffer_info->dma)) {
+			if (pci_dma_mapping_error(adapter->pdev,
+						  buffer_info->dma)) {
 				dev_err(&adapter->pdev->dev,
 					"TX DMA page map failed\n");
 				adapter->tx_dma_failed++;
@@ -3603,8 +3746,7 @@ static int e1000_xmit_frame(struct sk_buff *skb, struct net_device *netdev)
 
 			pull_size = min((unsigned int)4, skb->data_len);
 			if (!__pskb_pull_tail(skb, pull_size)) {
-				ndev_err(netdev,
-					 "__pskb_pull_tail failed.\n");
+				e_err("__pskb_pull_tail failed.\n");
 				dev_kfree_skb_any(skb);
 				return NETDEV_TX_OK;
 			}
@@ -3734,27 +3876,27 @@ static int e1000_change_mtu(struct net_device *netdev, int new_mtu)
 	struct e1000_adapter *adapter = netdev_priv(netdev);
 	int max_frame = new_mtu + ETH_HLEN + ETH_FCS_LEN;
 
-	if ((max_frame < ETH_ZLEN + ETH_FCS_LEN) ||
+	if ((new_mtu < ETH_ZLEN + ETH_FCS_LEN + VLAN_HLEN) ||
 	    (max_frame > MAX_JUMBO_FRAME_SIZE)) {
-		ndev_err(netdev, "Invalid MTU setting\n");
+		e_err("Invalid MTU setting\n");
 		return -EINVAL;
 	}
 
 	/* Jumbo frame size limits */
 	if (max_frame > ETH_FRAME_LEN + ETH_FCS_LEN) {
 		if (!(adapter->flags & FLAG_HAS_JUMBO_FRAMES)) {
-			ndev_err(netdev, "Jumbo Frames not supported.\n");
+			e_err("Jumbo Frames not supported.\n");
 			return -EINVAL;
 		}
 		if (adapter->hw.phy.type == e1000_phy_ife) {
-			ndev_err(netdev, "Jumbo Frames not supported.\n");
+			e_err("Jumbo Frames not supported.\n");
 			return -EINVAL;
 		}
 	}
 
 #define MAX_STD_JUMBO_FRAME_SIZE 9234
 	if (max_frame > MAX_STD_JUMBO_FRAME_SIZE) {
-		ndev_err(netdev, "MTU > 9216 not supported.\n");
+		e_err("MTU > 9216 not supported.\n");
 		return -EINVAL;
 	}
 
@@ -3791,8 +3933,7 @@ static int e1000_change_mtu(struct net_device *netdev, int new_mtu)
 		adapter->rx_buffer_len = ETH_FRAME_LEN + VLAN_HLEN
 					 + ETH_FCS_LEN;
 
-	ndev_info(netdev, "changing MTU from %d to %d\n",
-		netdev->mtu, new_mtu);
+	e_info("changing MTU from %d to %d\n", netdev->mtu, new_mtu);
 	netdev->mtu = new_mtu;
 
 	if (netif_running(netdev))
@@ -4005,10 +4146,7 @@ static int e1000_resume(struct pci_dev *pdev)
 	pci_restore_state(pdev);
 	e1000e_disable_l1aspm(pdev);
 
-	if (adapter->need_ioport)
-		err = pci_enable_device(pdev);
-	else
-		err = pci_enable_device_mem(pdev);
+	err = pci_enable_device_mem(pdev);
 	if (err) {
 		dev_err(&pdev->dev,
 			"Cannot enable PCI device from suspend\n");
@@ -4042,7 +4180,7 @@ static int e1000_resume(struct pci_dev *pdev)
 	 * is up.  For all other cases, let the f/w know that the h/w is now
 	 * under the control of the driver.
 	 */
-	if (!(adapter->flags & FLAG_HAS_AMT) || !e1000e_check_mng_mode(&adapter->hw))
+	if (!(adapter->flags & FLAG_HAS_AMT))
 		e1000_get_hw_control(adapter);
 
 	return 0;
@@ -4110,10 +4248,7 @@ static pci_ers_result_t e1000_io_slot_reset(struct pci_dev *pdev)
 	int err;
 
 	e1000e_disable_l1aspm(pdev);
-	if (adapter->need_ioport)
-		err = pci_enable_device(pdev);
-	else
-		err = pci_enable_device_mem(pdev);
+	err = pci_enable_device_mem(pdev);
 	if (err) {
 		dev_err(&pdev->dev,
 			"Cannot re-enable PCI device after reset.\n");
@@ -4161,8 +4296,7 @@ static void e1000_io_resume(struct pci_dev *pdev)
 	 * is up.  For all other cases, let the f/w know that the h/w is now
 	 * under the control of the driver.
 	 */
-	if (!(adapter->flags & FLAG_HAS_AMT) ||
-	    !e1000e_check_mng_mode(&adapter->hw))
+	if (!(adapter->flags & FLAG_HAS_AMT))
 		e1000_get_hw_control(adapter);
 
 }
@@ -4174,36 +4308,40 @@ static void e1000_print_device_info(struct e1000_adapter *adapter)
 	u32 pba_num;
 
 	/* print bus type/speed/width info */
-	ndev_info(netdev, "(PCI Express:2.5GB/s:%s) "
-		  "%02x:%02x:%02x:%02x:%02x:%02x\n",
-		  /* bus width */
-		 ((hw->bus.width == e1000_bus_width_pcie_x4) ? "Width x4" :
-		  "Width x1"),
-		  /* MAC address */
-		  netdev->dev_addr[0], netdev->dev_addr[1],
-		  netdev->dev_addr[2], netdev->dev_addr[3],
-		  netdev->dev_addr[4], netdev->dev_addr[5]);
-	ndev_info(netdev, "Intel(R) PRO/%s Network Connection\n",
-		  (hw->phy.type == e1000_phy_ife)
-		   ? "10/100" : "1000");
+	e_info("(PCI Express:2.5GB/s:%s) %02x:%02x:%02x:%02x:%02x:%02x\n",
+	       /* bus width */
+	       ((hw->bus.width == e1000_bus_width_pcie_x4) ? "Width x4" :
+	        "Width x1"),
+	       /* MAC address */
+	       netdev->dev_addr[0], netdev->dev_addr[1],
+	       netdev->dev_addr[2], netdev->dev_addr[3],
+	       netdev->dev_addr[4], netdev->dev_addr[5]);
+	e_info("Intel(R) PRO/%s Network Connection\n",
+	       (hw->phy.type == e1000_phy_ife) ? "10/100" : "1000");
 	e1000e_read_pba_num(hw, &pba_num);
-	ndev_info(netdev, "MAC: %d, PHY: %d, PBA No: %06x-%03x\n",
-		  hw->mac.type, hw->phy.type,
-		  (pba_num >> 8), (pba_num & 0xff));
+	e_info("MAC: %d, PHY: %d, PBA No: %06x-%03x\n",
+	       hw->mac.type, hw->phy.type, (pba_num >> 8), (pba_num & 0xff));
 }
 
-/**
- * e1000e_is_need_ioport - determine if an adapter needs ioport resources or not
- * @pdev: PCI device information struct
- *
- * Returns true if an adapters needs ioport resources
- **/
-static int e1000e_is_need_ioport(struct pci_dev *pdev)
+static void e1000_eeprom_checks(struct e1000_adapter *adapter)
 {
-	switch (pdev->device) {
-	/* Currently there are no adapters that need ioport resources */
-	default:
-		return false;
+	struct e1000_hw *hw = &adapter->hw;
+	int ret_val;
+	u16 buf = 0;
+
+	if (hw->mac.type != e1000_82573)
+		return;
+
+	ret_val = e1000_read_nvm(hw, NVM_INIT_CONTROL2_REG, 1, &buf);
+	if (!(le16_to_cpu(buf) & (1 << 0))) {
+		/* Deep Smart Power Down (DSPD) */
+		e_warn("Warning: detected DSPD enabled in EEPROM\n");
+	}
+
+	ret_val = e1000_read_nvm(hw, NVM_INIT_3GIO_3, 1, &buf);
+	if (le16_to_cpu(buf) & (3 << 2)) {
+		/* ASPM enable */
+		e_warn("Warning: detected ASPM enabled in EEPROM\n");
 	}
 }
 
@@ -4232,19 +4370,10 @@ static int __devinit e1000_probe(struct pci_dev *pdev,
 	int i, err, pci_using_dac;
 	u16 eeprom_data = 0;
 	u16 eeprom_apme_mask = E1000_EEPROM_APME;
-	int bars, need_ioport;
 
 	e1000e_disable_l1aspm(pdev);
 
-	/* do not allocate ioport bars when not needed */
-	need_ioport = e1000e_is_need_ioport(pdev);
-	if (need_ioport) {
-		bars = pci_select_bars(pdev, IORESOURCE_MEM | IORESOURCE_IO);
-		err = pci_enable_device(pdev);
-	} else {
-		bars = pci_select_bars(pdev, IORESOURCE_MEM);
-		err = pci_enable_device_mem(pdev);
-	}
+	err = pci_enable_device_mem(pdev);
 	if (err)
 		return err;
 
@@ -4267,7 +4396,9 @@ static int __devinit e1000_probe(struct pci_dev *pdev,
 		}
 	}
 
-	err = pci_request_selected_regions(pdev, bars, e1000e_driver_name);
+	err = pci_request_selected_regions(pdev,
+	                                  pci_select_bars(pdev, IORESOURCE_MEM),
+	                                  e1000e_driver_name);
 	if (err)
 		goto err_pci_reg;
 
@@ -4292,8 +4423,6 @@ static int __devinit e1000_probe(struct pci_dev *pdev,
 	adapter->hw.adapter = adapter;
 	adapter->hw.mac.type = ei->mac;
 	adapter->msg_enable = (1 << NETIF_MSG_DRV | NETIF_MSG_PROBE) - 1;
-	adapter->bars = bars;
-	adapter->need_ioport = need_ioport;
 
 	mmio_start = pci_resource_start(pdev, 0);
 	mmio_len = pci_resource_len(pdev, 0);
@@ -4365,8 +4494,7 @@ static int __devinit e1000_probe(struct pci_dev *pdev,
 	}
 
 	if (e1000_check_reset_block(&adapter->hw))
-		ndev_info(netdev,
-			  "PHY reset is blocked due to SOL/IDER session.\n");
+		e_info("PHY reset is blocked due to SOL/IDER session.\n");
 
 	netdev->features = NETIF_F_SG |
 			   NETIF_F_HW_CSUM |
@@ -4410,25 +4538,26 @@ static int __devinit e1000_probe(struct pci_dev *pdev,
 		if (e1000_validate_nvm_checksum(&adapter->hw) >= 0)
 			break;
 		if (i == 2) {
-			ndev_err(netdev, "The NVM Checksum Is Not Valid\n");
+			e_err("The NVM Checksum Is Not Valid\n");
 			err = -EIO;
 			goto err_eeprom;
 		}
 	}
 
+	e1000_eeprom_checks(adapter);
+
 	/* copy the MAC address out of the NVM */
 	if (e1000e_read_mac_addr(&adapter->hw))
-		ndev_err(netdev, "NVM Read Error while reading MAC address\n");
+		e_err("NVM Read Error while reading MAC address\n");
 
 	memcpy(netdev->dev_addr, adapter->hw.mac.addr, netdev->addr_len);
 	memcpy(netdev->perm_addr, adapter->hw.mac.addr, netdev->addr_len);
 
 	if (!is_valid_ether_addr(netdev->perm_addr)) {
-		ndev_err(netdev, "Invalid MAC Address: "
-			 "%02x:%02x:%02x:%02x:%02x:%02x\n",
-			 netdev->perm_addr[0], netdev->perm_addr[1],
-			 netdev->perm_addr[2], netdev->perm_addr[3],
-			 netdev->perm_addr[4], netdev->perm_addr[5]);
+		e_err("Invalid MAC Address: %02x:%02x:%02x:%02x:%02x:%02x\n",
+		      netdev->perm_addr[0], netdev->perm_addr[1],
+		      netdev->perm_addr[2], netdev->perm_addr[3],
+		      netdev->perm_addr[4], netdev->perm_addr[5]);
 		err = -EIO;
 		goto err_eeprom;
 	}
@@ -4498,8 +4627,7 @@ static int __devinit e1000_probe(struct pci_dev *pdev,
 	 * is up.  For all other cases, let the f/w know that the h/w is now
 	 * under the control of the driver.
 	 */
-	if (!(adapter->flags & FLAG_HAS_AMT) ||
-	    !e1000e_check_mng_mode(&adapter->hw))
+	if (!(adapter->flags & FLAG_HAS_AMT))
 		e1000_get_hw_control(adapter);
 
 	/* tell the stack to leave us alone until e1000_open() is called */
@@ -4516,24 +4644,25 @@ static int __devinit e1000_probe(struct pci_dev *pdev,
 	return 0;
 
 err_register:
-err_hw_init:
-	e1000_release_hw_control(adapter);
+	if (!(adapter->flags & FLAG_HAS_AMT))
+		e1000_release_hw_control(adapter);
 err_eeprom:
 	if (!e1000_check_reset_block(&adapter->hw))
 		e1000_phy_hw_reset(&adapter->hw);
+err_hw_init:
 
-	if (adapter->hw.flash_address)
-		iounmap(adapter->hw.flash_address);
-
-err_flashmap:
 	kfree(adapter->tx_ring);
 	kfree(adapter->rx_ring);
 err_sw_init:
+	if (adapter->hw.flash_address)
+		iounmap(adapter->hw.flash_address);
+err_flashmap:
 	iounmap(adapter->hw.hw_addr);
 err_ioremap:
 	free_netdev(netdev);
 err_alloc_etherdev:
-	pci_release_selected_regions(pdev, bars);
+	pci_release_selected_regions(pdev,
+	                             pci_select_bars(pdev, IORESOURCE_MEM));
 err_pci_reg:
 err_dma:
 	pci_disable_device(pdev);
@@ -4581,7 +4710,8 @@ static void __devexit e1000_remove(struct pci_dev *pdev)
 	iounmap(adapter->hw.hw_addr);
 	if (adapter->hw.flash_address)
 		iounmap(adapter->hw.flash_address);
-	pci_release_selected_regions(pdev, adapter->bars);
+	pci_release_selected_regions(pdev,
+	                             pci_select_bars(pdev, IORESOURCE_MEM));
 
 	free_netdev(netdev);
 
diff --git a/drivers/net/e1000e/param.c b/drivers/net/e1000e/param.c
index a66b92efcf80..ed912e023a72 100644
--- a/drivers/net/e1000e/param.c
+++ b/drivers/net/e1000e/param.c
@@ -27,6 +27,7 @@
 *******************************************************************************/
 
 #include <linux/netdevice.h>
+#include <linux/pci.h>
 
 #include "e1000.h"
 
@@ -162,17 +163,16 @@ static int __devinit e1000_validate_option(unsigned int *value,
 	case enable_option:
 		switch (*value) {
 		case OPTION_ENABLED:
-			ndev_info(adapter->netdev, "%s Enabled\n", opt->name);
+			e_info("%s Enabled\n", opt->name);
 			return 0;
 		case OPTION_DISABLED:
-			ndev_info(adapter->netdev, "%s Disabled\n", opt->name);
+			e_info("%s Disabled\n", opt->name);
 			return 0;
 		}
 		break;
 	case range_option:
 		if (*value >= opt->arg.r.min && *value <= opt->arg.r.max) {
-			ndev_info(adapter->netdev,
-					"%s set to %i\n", opt->name, *value);
+			e_info("%s set to %i\n", opt->name, *value);
 			return 0;
 		}
 		break;
@@ -184,8 +184,7 @@ static int __devinit e1000_validate_option(unsigned int *value,
 			ent = &opt->arg.l.p[i];
 			if (*value == ent->i) {
 				if (ent->str[0] != '\0')
-					ndev_info(adapter->netdev, "%s\n",
-						  ent->str);
+					e_info("%s\n", ent->str);
 				return 0;
 			}
 		}
@@ -195,8 +194,8 @@ static int __devinit e1000_validate_option(unsigned int *value,
 		BUG();
 	}
 
-	ndev_info(adapter->netdev, "Invalid %s value specified (%i) %s\n",
-	       opt->name, *value, opt->err);
+	e_info("Invalid %s value specified (%i) %s\n", opt->name, *value,
+	       opt->err);
 	*value = opt->def;
 	return -1;
 }
@@ -213,13 +212,11 @@ static int __devinit e1000_validate_option(unsigned int *value,
 void __devinit e1000e_check_options(struct e1000_adapter *adapter)
 {
 	struct e1000_hw *hw = &adapter->hw;
-	struct net_device *netdev = adapter->netdev;
 	int bd = adapter->bd_number;
 
 	if (bd >= E1000_MAX_NIC) {
-		ndev_notice(netdev,
-		       "Warning: no configuration for board #%i\n", bd);
-		ndev_notice(netdev, "Using defaults for all values\n");
+		e_notice("Warning: no configuration for board #%i\n", bd);
+		e_notice("Using defaults for all values\n");
 	}
 
 	{ /* Transmit Interrupt Delay */
@@ -313,32 +310,41 @@ void __devinit e1000e_check_options(struct e1000_adapter *adapter)
 			adapter->itr = InterruptThrottleRate[bd];
 			switch (adapter->itr) {
 			case 0:
-				ndev_info(netdev, "%s turned off\n",
-					opt.name);
+				e_info("%s turned off\n", opt.name);
 				break;
 			case 1:
-				ndev_info(netdev,
-					  "%s set to dynamic mode\n",
-					  opt.name);
+				e_info("%s set to dynamic mode\n", opt.name);
 				adapter->itr_setting = adapter->itr;
 				adapter->itr = 20000;
 				break;
 			case 3:
-				ndev_info(netdev,
-					"%s set to dynamic conservative mode\n",
+				e_info("%s set to dynamic conservative mode\n",
 					opt.name);
 				adapter->itr_setting = adapter->itr;
 				adapter->itr = 20000;
 				break;
 			default:
-				e1000_validate_option(&adapter->itr, &opt,
-					adapter);
 				/*
-				 * save the setting, because the dynamic bits
-				 * change itr. clear the lower two bits
-				 * because they are used as control
+				 * Save the setting, because the dynamic bits
+				 * change itr.
 				 */
-				adapter->itr_setting = adapter->itr & ~3;
+				if (e1000_validate_option(&adapter->itr, &opt,
+							  adapter) &&
+				    (adapter->itr == 3)) {
+					/*
+					 * In case of invalid user value,
+					 * default to conservative mode.
+					 */
+					adapter->itr_setting = adapter->itr;
+					adapter->itr = 20000;
+				} else {
+					/*
+					 * Clear the lower two bits because
+					 * they are used as control.
+					 */
+					adapter->itr_setting =
+						adapter->itr & ~3;
+				}
 				break;
 			}
 		} else {
diff --git a/drivers/net/eepro.c b/drivers/net/eepro.c
index 56f50491a453..1f11350e16cf 100644
--- a/drivers/net/eepro.c
+++ b/drivers/net/eepro.c
@@ -1283,14 +1283,6 @@ set_multicast_list(struct net_device *dev)
 
 	if (dev->flags&(IFF_ALLMULTI|IFF_PROMISC) || dev->mc_count > 63)
 	{
-		/*
-		 *	We must make the kernel realise we had to move
-		 *	into promisc mode or we start all out war on
-		 *	the cable. If it was a promisc request the
-		 *	flag is already set. If not we assert it.
-		 */
-		dev->flags|=IFF_PROMISC;
-
 		eepro_sw2bank2(ioaddr); /* be CAREFUL, BANK 2 now */
 		mode = inb(ioaddr + REG2);
 		outb(mode | PRMSC_Mode, ioaddr + REG2);
diff --git a/drivers/net/ehea/ehea_main.c b/drivers/net/ehea/ehea_main.c
index 0920b796bd78..b70c5314f537 100644
--- a/drivers/net/ehea/ehea_main.c
+++ b/drivers/net/ehea/ehea_main.c
@@ -2937,9 +2937,9 @@ static void ehea_rereg_mrs(struct work_struct *work)
 				}
 			}
 		}
-       mutex_unlock(&dlpar_mem_lock);
-       ehea_info("re-initializing driver complete");
+	ehea_info("re-initializing driver complete");
 out:
+	mutex_unlock(&dlpar_mem_lock);
 	return;
 }
 
diff --git a/drivers/net/enc28j60.c b/drivers/net/enc28j60.c
index c05cb159c772..aa0bf6e1c694 100644
--- a/drivers/net/enc28j60.c
+++ b/drivers/net/enc28j60.c
@@ -1547,8 +1547,10 @@ static int __devinit enc28j60_probe(struct spi_device *spi)
 	random_ether_addr(dev->dev_addr);
 	enc28j60_set_hw_macaddr(dev);
 
-	ret = request_irq(spi->irq, enc28j60_irq, IRQF_TRIGGER_FALLING,
-			  DRV_NAME, priv);
+	/* Board setup must set the relevant edge trigger type;
+	 * level triggers won't currently work.
+	 */
+	ret = request_irq(spi->irq, enc28j60_irq, 0, DRV_NAME, priv);
 	if (ret < 0) {
 		if (netif_msg_probe(priv))
 			dev_err(&spi->dev, DRV_NAME ": request irq %d failed "
diff --git a/drivers/net/eth16i.c b/drivers/net/eth16i.c
index e3dd8b136908..bee8b3fbc565 100644
--- a/drivers/net/eth16i.c
+++ b/drivers/net/eth16i.c
@@ -1356,7 +1356,6 @@ static void eth16i_multicast(struct net_device *dev)
 
 	if(dev->mc_count || dev->flags&(IFF_ALLMULTI|IFF_PROMISC))
 	{
-		dev->flags|=IFF_PROMISC;	/* Must do this */
 		outb(3, ioaddr + RECEIVE_MODE_REG);
 	} else {
 		outb(2, ioaddr + RECEIVE_MODE_REG);
diff --git a/drivers/net/forcedeth.c b/drivers/net/forcedeth.c
index 4ed89fa9ae46..331b86b01fa9 100644
--- a/drivers/net/forcedeth.c
+++ b/drivers/net/forcedeth.c
@@ -77,26 +77,27 @@
  * Hardware access:
  */
 
-#define DEV_NEED_TIMERIRQ          0x00001  /* set the timer irq flag in the irq mask */
-#define DEV_NEED_LINKTIMER         0x00002  /* poll link settings. Relies on the timer irq */
-#define DEV_HAS_LARGEDESC          0x00004  /* device supports jumbo frames and needs packet format 2 */
-#define DEV_HAS_HIGH_DMA           0x00008  /* device supports 64bit dma */
-#define DEV_HAS_CHECKSUM           0x00010  /* device supports tx and rx checksum offloads */
-#define DEV_HAS_VLAN               0x00020  /* device supports vlan tagging and striping */
-#define DEV_HAS_MSI                0x00040  /* device supports MSI */
-#define DEV_HAS_MSI_X              0x00080  /* device supports MSI-X */
-#define DEV_HAS_POWER_CNTRL        0x00100  /* device supports power savings */
-#define DEV_HAS_STATISTICS_V1      0x00200  /* device supports hw statistics version 1 */
-#define DEV_HAS_STATISTICS_V2      0x00400  /* device supports hw statistics version 2 */
-#define DEV_HAS_TEST_EXTENDED      0x00800  /* device supports extended diagnostic test */
-#define DEV_HAS_MGMT_UNIT          0x01000  /* device supports management unit */
-#define DEV_HAS_CORRECT_MACADDR    0x02000  /* device supports correct mac address order */
-#define DEV_HAS_COLLISION_FIX      0x04000  /* device supports tx collision fix */
-#define DEV_HAS_PAUSEFRAME_TX_V1   0x08000  /* device supports tx pause frames version 1 */
-#define DEV_HAS_PAUSEFRAME_TX_V2   0x10000  /* device supports tx pause frames version 2 */
-#define DEV_HAS_PAUSEFRAME_TX_V3   0x20000  /* device supports tx pause frames version 3 */
-#define DEV_NEED_TX_LIMIT          0x40000  /* device needs to limit tx */
-#define DEV_HAS_GEAR_MODE          0x80000  /* device supports gear mode */
+#define DEV_NEED_TIMERIRQ          0x000001  /* set the timer irq flag in the irq mask */
+#define DEV_NEED_LINKTIMER         0x000002  /* poll link settings. Relies on the timer irq */
+#define DEV_HAS_LARGEDESC          0x000004  /* device supports jumbo frames and needs packet format 2 */
+#define DEV_HAS_HIGH_DMA           0x000008  /* device supports 64bit dma */
+#define DEV_HAS_CHECKSUM           0x000010  /* device supports tx and rx checksum offloads */
+#define DEV_HAS_VLAN               0x000020  /* device supports vlan tagging and striping */
+#define DEV_HAS_MSI                0x000040  /* device supports MSI */
+#define DEV_HAS_MSI_X              0x000080  /* device supports MSI-X */
+#define DEV_HAS_POWER_CNTRL        0x000100  /* device supports power savings */
+#define DEV_HAS_STATISTICS_V1      0x000200  /* device supports hw statistics version 1 */
+#define DEV_HAS_STATISTICS_V2      0x000400  /* device supports hw statistics version 2 */
+#define DEV_HAS_STATISTICS_V3      0x000800  /* device supports hw statistics version 3 */
+#define DEV_HAS_TEST_EXTENDED      0x001000  /* device supports extended diagnostic test */
+#define DEV_HAS_MGMT_UNIT          0x002000  /* device supports management unit */
+#define DEV_HAS_CORRECT_MACADDR    0x004000  /* device supports correct mac address order */
+#define DEV_HAS_COLLISION_FIX      0x008000  /* device supports tx collision fix */
+#define DEV_HAS_PAUSEFRAME_TX_V1   0x010000  /* device supports tx pause frames version 1 */
+#define DEV_HAS_PAUSEFRAME_TX_V2   0x020000  /* device supports tx pause frames version 2 */
+#define DEV_HAS_PAUSEFRAME_TX_V3   0x040000  /* device supports tx pause frames version 3 */
+#define DEV_NEED_TX_LIMIT          0x080000  /* device needs to limit tx */
+#define DEV_HAS_GEAR_MODE          0x100000  /* device supports gear mode */
 
 enum {
 	NvRegIrqStatus = 0x000,
@@ -248,6 +249,8 @@ enum {
 #define NVREG_TX_PAUSEFRAME_ENABLE_V1	0x01800010
 #define NVREG_TX_PAUSEFRAME_ENABLE_V2	0x056003f0
 #define NVREG_TX_PAUSEFRAME_ENABLE_V3	0x09f00880
+	NvRegTxPauseFrameLimit = 0x174,
+#define NVREG_TX_PAUSEFRAMELIMIT_ENABLE	0x00010000
 	NvRegMIIStatus = 0x180,
 #define NVREG_MIISTAT_ERROR		0x0001
 #define NVREG_MIISTAT_LINKCHANGE	0x0008
@@ -270,6 +273,9 @@ enum {
 #define NVREG_MIICTL_WRITE	0x00400
 #define NVREG_MIICTL_ADDRSHIFT	5
 	NvRegMIIData = 0x194,
+	NvRegTxUnicast = 0x1a0,
+	NvRegTxMulticast = 0x1a4,
+	NvRegTxBroadcast = 0x1a8,
 	NvRegWakeUpFlags = 0x200,
 #define NVREG_WAKEUPFLAGS_VAL		0x7770
 #define NVREG_WAKEUPFLAGS_BUSYSHIFT	24
@@ -333,6 +339,7 @@ enum {
 	NvRegPowerState2 = 0x600,
 #define NVREG_POWERSTATE2_POWERUP_MASK		0x0F11
 #define NVREG_POWERSTATE2_POWERUP_REV_A3	0x0001
+#define NVREG_POWERSTATE2_PHY_RESET		0x0004
 };
 
 /* Big endian: should work, but is untested */
@@ -401,6 +408,7 @@ union ring_type {
 #define NV_RX_FRAMINGERR	(1<<29)
 #define NV_RX_ERROR		(1<<30)
 #define NV_RX_AVAIL		(1<<31)
+#define NV_RX_ERROR_MASK	(NV_RX_ERROR1|NV_RX_ERROR2|NV_RX_ERROR3|NV_RX_ERROR4|NV_RX_CRCERR|NV_RX_OVERFLOW|NV_RX_FRAMINGERR)
 
 #define NV_RX2_CHECKSUMMASK	(0x1C000000)
 #define NV_RX2_CHECKSUM_IP	(0x10000000)
@@ -418,6 +426,7 @@ union ring_type {
 /* error and avail are the same for both */
 #define NV_RX2_ERROR		(1<<30)
 #define NV_RX2_AVAIL		(1<<31)
+#define NV_RX2_ERROR_MASK	(NV_RX2_ERROR1|NV_RX2_ERROR2|NV_RX2_ERROR3|NV_RX2_ERROR4|NV_RX2_CRCERR|NV_RX2_OVERFLOW|NV_RX2_FRAMINGERR)
 
 #define NV_RX3_VLAN_TAG_PRESENT (1<<16)
 #define NV_RX3_VLAN_TAG_MASK	(0x0000FFFF)
@@ -529,6 +538,7 @@ union ring_type {
 #define PHY_REALTEK_INIT_REG4	0x14
 #define PHY_REALTEK_INIT_REG5	0x18
 #define PHY_REALTEK_INIT_REG6	0x11
+#define PHY_REALTEK_INIT_REG7	0x01
 #define PHY_REALTEK_INIT1	0x0000
 #define PHY_REALTEK_INIT2	0x8e00
 #define PHY_REALTEK_INIT3	0x0001
@@ -537,6 +547,9 @@ union ring_type {
 #define PHY_REALTEK_INIT6	0xf5c7
 #define PHY_REALTEK_INIT7	0x1000
 #define PHY_REALTEK_INIT8	0x0003
+#define PHY_REALTEK_INIT9	0x0008
+#define PHY_REALTEK_INIT10	0x0005
+#define PHY_REALTEK_INIT11	0x0200
 #define PHY_REALTEK_INIT_MSK1	0x0003
 
 #define PHY_GIGABIT	0x0100
@@ -611,7 +624,12 @@ static const struct nv_ethtool_str nv_estats_str[] = {
 	{ "rx_bytes" },
 	{ "tx_pause" },
 	{ "rx_pause" },
-	{ "rx_drop_frame" }
+	{ "rx_drop_frame" },
+
+	/* version 3 stats */
+	{ "tx_unicast" },
+	{ "tx_multicast" },
+	{ "tx_broadcast" }
 };
 
 struct nv_ethtool_stats {
@@ -647,9 +665,15 @@ struct nv_ethtool_stats {
 	u64 tx_pause;
 	u64 rx_pause;
 	u64 rx_drop_frame;
+
+	/* version 3 stats */
+	u64 tx_unicast;
+	u64 tx_multicast;
+	u64 tx_broadcast;
 };
 
-#define NV_DEV_STATISTICS_V2_COUNT (sizeof(struct nv_ethtool_stats)/sizeof(u64))
+#define NV_DEV_STATISTICS_V3_COUNT (sizeof(struct nv_ethtool_stats)/sizeof(u64))
+#define NV_DEV_STATISTICS_V2_COUNT (NV_DEV_STATISTICS_V3_COUNT - 3)
 #define NV_DEV_STATISTICS_V1_COUNT (NV_DEV_STATISTICS_V2_COUNT - 6)
 
 /* diagnostics */
@@ -1149,6 +1173,42 @@ static int phy_init(struct net_device *dev)
 				return PHY_ERROR;
 			}
 		}
+		if (np->phy_model == PHY_MODEL_REALTEK_8211 &&
+		    np->phy_rev == PHY_REV_REALTEK_8211C) {
+			u32 powerstate = readl(base + NvRegPowerState2);
+
+			/* need to perform hw phy reset */
+			powerstate |= NVREG_POWERSTATE2_PHY_RESET;
+			writel(powerstate, base + NvRegPowerState2);
+			msleep(25);
+
+			powerstate &= ~NVREG_POWERSTATE2_PHY_RESET;
+			writel(powerstate, base + NvRegPowerState2);
+			msleep(25);
+
+			reg = mii_rw(dev, np->phyaddr, PHY_REALTEK_INIT_REG6, MII_READ);
+			reg |= PHY_REALTEK_INIT9;
+			if (mii_rw(dev, np->phyaddr, PHY_REALTEK_INIT_REG6, reg)) {
+				printk(KERN_INFO "%s: phy init failed.\n", pci_name(np->pci_dev));
+				return PHY_ERROR;
+			}
+			if (mii_rw(dev, np->phyaddr, PHY_REALTEK_INIT_REG1, PHY_REALTEK_INIT10)) {
+				printk(KERN_INFO "%s: phy init failed.\n", pci_name(np->pci_dev));
+				return PHY_ERROR;
+			}
+			reg = mii_rw(dev, np->phyaddr, PHY_REALTEK_INIT_REG7, MII_READ);
+			if (!(reg & PHY_REALTEK_INIT11)) {
+				reg |= PHY_REALTEK_INIT11;
+				if (mii_rw(dev, np->phyaddr, PHY_REALTEK_INIT_REG7, reg)) {
+					printk(KERN_INFO "%s: phy init failed.\n", pci_name(np->pci_dev));
+					return PHY_ERROR;
+				}
+			}
+			if (mii_rw(dev, np->phyaddr, PHY_REALTEK_INIT_REG1, PHY_REALTEK_INIT1)) {
+				printk(KERN_INFO "%s: phy init failed.\n", pci_name(np->pci_dev));
+				return PHY_ERROR;
+			}
+		}
 		if (np->phy_model == PHY_MODEL_REALTEK_8201) {
 			if (np->device_id == PCI_DEVICE_ID_NVIDIA_NVENET_32 ||
 			    np->device_id == PCI_DEVICE_ID_NVIDIA_NVENET_33 ||
@@ -1201,12 +1261,23 @@ static int phy_init(struct net_device *dev)
 	mii_control = mii_rw(dev, np->phyaddr, MII_BMCR, MII_READ);
 	mii_control |= BMCR_ANENABLE;
 
-	/* reset the phy
-	 * (certain phys need bmcr to be setup with reset)
-	 */
-	if (phy_reset(dev, mii_control)) {
-		printk(KERN_INFO "%s: phy reset failed\n", pci_name(np->pci_dev));
-		return PHY_ERROR;
+	if (np->phy_oui == PHY_OUI_REALTEK &&
+	    np->phy_model == PHY_MODEL_REALTEK_8211 &&
+	    np->phy_rev == PHY_REV_REALTEK_8211C) {
+		/* start autoneg since we already performed hw reset above */
+		mii_control |= BMCR_ANRESTART;
+		if (mii_rw(dev, np->phyaddr, MII_BMCR, mii_control)) {
+			printk(KERN_INFO "%s: phy init failed\n", pci_name(np->pci_dev));
+			return PHY_ERROR;
+		}
+	} else {
+		/* reset the phy
+		 * (certain phys need bmcr to be setup with reset)
+		 */
+		if (phy_reset(dev, mii_control)) {
+			printk(KERN_INFO "%s: phy reset failed\n", pci_name(np->pci_dev));
+			return PHY_ERROR;
+		}
 	}
 
 	/* phy vendor specific configuration */
@@ -1576,6 +1647,12 @@ static void nv_get_hw_stats(struct net_device *dev)
 		np->estats.rx_pause += readl(base + NvRegRxPause);
 		np->estats.rx_drop_frame += readl(base + NvRegRxDropFrame);
 	}
+
+	if (np->driver_data & DEV_HAS_STATISTICS_V3) {
+		np->estats.tx_unicast += readl(base + NvRegTxUnicast);
+		np->estats.tx_multicast += readl(base + NvRegTxMulticast);
+		np->estats.tx_broadcast += readl(base + NvRegTxBroadcast);
+	}
 }
 
 /*
@@ -1589,7 +1666,7 @@ static struct net_device_stats *nv_get_stats(struct net_device *dev)
 	struct fe_priv *np = netdev_priv(dev);
 
 	/* If the nic supports hw counters then retrieve latest values */
-	if (np->driver_data & (DEV_HAS_STATISTICS_V1|DEV_HAS_STATISTICS_V2)) {
+	if (np->driver_data & (DEV_HAS_STATISTICS_V1|DEV_HAS_STATISTICS_V2|DEV_HAS_STATISTICS_V3)) {
 		nv_get_hw_stats(dev);
 
 		/* copy to net_device stats */
@@ -2580,7 +2657,7 @@ static int nv_rx_process(struct net_device *dev, int limit)
 			if (likely(flags & NV_RX_DESCRIPTORVALID)) {
 				len = flags & LEN_MASK_V1;
 				if (unlikely(flags & NV_RX_ERROR)) {
-					if (flags & NV_RX_ERROR4) {
+					if ((flags & NV_RX_ERROR_MASK) == NV_RX_ERROR4) {
 						len = nv_getlen(dev, skb->data, len);
 						if (len < 0) {
 							dev->stats.rx_errors++;
@@ -2589,7 +2666,7 @@ static int nv_rx_process(struct net_device *dev, int limit)
 						}
 					}
 					/* framing errors are soft errors */
-					else if (flags & NV_RX_FRAMINGERR) {
+					else if ((flags & NV_RX_ERROR_MASK) == NV_RX_FRAMINGERR) {
 						if (flags & NV_RX_SUBSTRACT1) {
 							len--;
 						}
@@ -2615,7 +2692,7 @@ static int nv_rx_process(struct net_device *dev, int limit)
 			if (likely(flags & NV_RX2_DESCRIPTORVALID)) {
 				len = flags & LEN_MASK_V2;
 				if (unlikely(flags & NV_RX2_ERROR)) {
-					if (flags & NV_RX2_ERROR4) {
+					if ((flags & NV_RX2_ERROR_MASK) == NV_RX2_ERROR4) {
 						len = nv_getlen(dev, skb->data, len);
 						if (len < 0) {
 							dev->stats.rx_errors++;
@@ -2624,7 +2701,7 @@ static int nv_rx_process(struct net_device *dev, int limit)
 						}
 					}
 					/* framing errors are soft errors */
-					else if (flags & NV_RX2_FRAMINGERR) {
+					else if ((flags & NV_RX2_ERROR_MASK) == NV_RX2_FRAMINGERR) {
 						if (flags & NV_RX2_SUBSTRACT1) {
 							len--;
 						}
@@ -2714,7 +2791,7 @@ static int nv_rx_process_optimized(struct net_device *dev, int limit)
 		if (likely(flags & NV_RX2_DESCRIPTORVALID)) {
 			len = flags & LEN_MASK_V2;
 			if (unlikely(flags & NV_RX2_ERROR)) {
-				if (flags & NV_RX2_ERROR4) {
+				if ((flags & NV_RX2_ERROR_MASK) == NV_RX2_ERROR4) {
 					len = nv_getlen(dev, skb->data, len);
 					if (len < 0) {
 						dev_kfree_skb(skb);
@@ -2722,7 +2799,7 @@ static int nv_rx_process_optimized(struct net_device *dev, int limit)
 					}
 				}
 				/* framing errors are soft errors */
-				else if (flags & NV_RX2_FRAMINGERR) {
+				else if ((flags & NV_RX2_ERROR_MASK) == NV_RX2_FRAMINGERR) {
 					if (flags & NV_RX2_SUBSTRACT1) {
 						len--;
 					}
@@ -3001,8 +3078,11 @@ static void nv_update_pause(struct net_device *dev, u32 pause_flags)
 			u32 pause_enable = NVREG_TX_PAUSEFRAME_ENABLE_V1;
 			if (np->driver_data & DEV_HAS_PAUSEFRAME_TX_V2)
 				pause_enable = NVREG_TX_PAUSEFRAME_ENABLE_V2;
-			if (np->driver_data & DEV_HAS_PAUSEFRAME_TX_V3)
+			if (np->driver_data & DEV_HAS_PAUSEFRAME_TX_V3) {
 				pause_enable = NVREG_TX_PAUSEFRAME_ENABLE_V3;
+				/* limit the number of tx pause frames to a default of 8 */
+				writel(readl(base + NvRegTxPauseFrameLimit)|NVREG_TX_PAUSEFRAMELIMIT_ENABLE, base + NvRegTxPauseFrameLimit);
+			}
 			writel(pause_enable,  base + NvRegTxPauseFrame);
 			writel(regmisc|NVREG_MISC1_PAUSE_TX, base + NvRegMisc1);
 			np->pause_flags |= NV_PAUSEFRAME_TX_ENABLE;
@@ -4688,6 +4768,8 @@ static int nv_get_sset_count(struct net_device *dev, int sset)
 			return NV_DEV_STATISTICS_V1_COUNT;
 		else if (np->driver_data & DEV_HAS_STATISTICS_V2)
 			return NV_DEV_STATISTICS_V2_COUNT;
+		else if (np->driver_data & DEV_HAS_STATISTICS_V3)
+			return NV_DEV_STATISTICS_V3_COUNT;
 		else
 			return 0;
 	default:
@@ -5272,7 +5354,7 @@ static int nv_open(struct net_device *dev)
 		mod_timer(&np->oom_kick, jiffies + OOM_REFILL);
 
 	/* start statistics timer */
-	if (np->driver_data & (DEV_HAS_STATISTICS_V1|DEV_HAS_STATISTICS_V2))
+	if (np->driver_data & (DEV_HAS_STATISTICS_V1|DEV_HAS_STATISTICS_V2|DEV_HAS_STATISTICS_V3))
 		mod_timer(&np->stats_poll,
 			round_jiffies(jiffies + STATS_INTERVAL));
 
@@ -5376,7 +5458,7 @@ static int __devinit nv_probe(struct pci_dev *pci_dev, const struct pci_device_i
 	if (err < 0)
 		goto out_disable;
 
-	if (id->driver_data & (DEV_HAS_VLAN|DEV_HAS_MSI_X|DEV_HAS_POWER_CNTRL|DEV_HAS_STATISTICS_V2))
+	if (id->driver_data & (DEV_HAS_VLAN|DEV_HAS_MSI_X|DEV_HAS_POWER_CNTRL|DEV_HAS_STATISTICS_V2|DEV_HAS_STATISTICS_V3))
 		np->register_size = NV_PCI_REGSZ_VER3;
 	else if (id->driver_data & DEV_HAS_STATISTICS_V1)
 		np->register_size = NV_PCI_REGSZ_VER2;
@@ -5440,7 +5522,7 @@ static int __devinit nv_probe(struct pci_dev *pci_dev, const struct pci_device_i
 	if (id->driver_data & DEV_HAS_CHECKSUM) {
 		np->rx_csum = 1;
 		np->txrxctl_bits |= NVREG_TXRXCTL_RXCHECK;
-		dev->features |= NETIF_F_HW_CSUM | NETIF_F_SG;
+		dev->features |= NETIF_F_IP_CSUM | NETIF_F_SG;
 		dev->features |= NETIF_F_TSO;
 	}
 
@@ -5753,7 +5835,7 @@ static int __devinit nv_probe(struct pci_dev *pci_dev, const struct pci_device_i
 
 	dev_printk(KERN_INFO, &pci_dev->dev, "%s%s%s%s%s%s%s%s%s%sdesc-v%u\n",
 		   dev->features & NETIF_F_HIGHDMA ? "highdma " : "",
-		   dev->features & (NETIF_F_HW_CSUM | NETIF_F_SG) ?
+		   dev->features & (NETIF_F_IP_CSUM | NETIF_F_SG) ?
 		   	"csum " : "",
 		   dev->features & (NETIF_F_HW_VLAN_RX | NETIF_F_HW_VLAN_TX) ?
 		   	"vlan " : "",
@@ -6031,35 +6113,35 @@ static struct pci_device_id pci_tbl[] = {
 	},
 	{	/* MCP77 Ethernet Controller */
 		PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NVENET_32),
-		.driver_data = DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER|DEV_HAS_CHECKSUM|DEV_HAS_HIGH_DMA|DEV_HAS_MSI|DEV_HAS_POWER_CNTRL|DEV_HAS_PAUSEFRAME_TX_V2|DEV_HAS_STATISTICS_V2|DEV_HAS_TEST_EXTENDED|DEV_HAS_MGMT_UNIT|DEV_HAS_CORRECT_MACADDR|DEV_HAS_COLLISION_FIX|DEV_NEED_TX_LIMIT|DEV_HAS_GEAR_MODE,
+		.driver_data = DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER|DEV_HAS_CHECKSUM|DEV_HAS_HIGH_DMA|DEV_HAS_MSI|DEV_HAS_POWER_CNTRL|DEV_HAS_PAUSEFRAME_TX_V2|DEV_HAS_STATISTICS_V3|DEV_HAS_TEST_EXTENDED|DEV_HAS_MGMT_UNIT|DEV_HAS_CORRECT_MACADDR|DEV_HAS_COLLISION_FIX|DEV_NEED_TX_LIMIT|DEV_HAS_GEAR_MODE,
 	},
 	{	/* MCP77 Ethernet Controller */
 		PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NVENET_33),
-		.driver_data = DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER|DEV_HAS_CHECKSUM|DEV_HAS_HIGH_DMA|DEV_HAS_MSI|DEV_HAS_POWER_CNTRL|DEV_HAS_PAUSEFRAME_TX_V2|DEV_HAS_STATISTICS_V2|DEV_HAS_TEST_EXTENDED|DEV_HAS_MGMT_UNIT|DEV_HAS_CORRECT_MACADDR|DEV_HAS_COLLISION_FIX|DEV_NEED_TX_LIMIT|DEV_HAS_GEAR_MODE,
+		.driver_data = DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER|DEV_HAS_CHECKSUM|DEV_HAS_HIGH_DMA|DEV_HAS_MSI|DEV_HAS_POWER_CNTRL|DEV_HAS_PAUSEFRAME_TX_V2|DEV_HAS_STATISTICS_V3|DEV_HAS_TEST_EXTENDED|DEV_HAS_MGMT_UNIT|DEV_HAS_CORRECT_MACADDR|DEV_HAS_COLLISION_FIX|DEV_NEED_TX_LIMIT|DEV_HAS_GEAR_MODE,
 	},
 	{	/* MCP77 Ethernet Controller */
 		PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NVENET_34),
-		.driver_data = DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER|DEV_HAS_CHECKSUM|DEV_HAS_HIGH_DMA|DEV_HAS_MSI|DEV_HAS_POWER_CNTRL|DEV_HAS_PAUSEFRAME_TX_V2|DEV_HAS_STATISTICS_V2|DEV_HAS_TEST_EXTENDED|DEV_HAS_MGMT_UNIT|DEV_HAS_CORRECT_MACADDR|DEV_HAS_COLLISION_FIX|DEV_NEED_TX_LIMIT|DEV_HAS_GEAR_MODE,
+		.driver_data = DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER|DEV_HAS_CHECKSUM|DEV_HAS_HIGH_DMA|DEV_HAS_MSI|DEV_HAS_POWER_CNTRL|DEV_HAS_PAUSEFRAME_TX_V2|DEV_HAS_STATISTICS_V3|DEV_HAS_TEST_EXTENDED|DEV_HAS_MGMT_UNIT|DEV_HAS_CORRECT_MACADDR|DEV_HAS_COLLISION_FIX|DEV_NEED_TX_LIMIT|DEV_HAS_GEAR_MODE,
 	},
 	{	/* MCP77 Ethernet Controller */
 		PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NVENET_35),
-		.driver_data = DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER|DEV_HAS_CHECKSUM|DEV_HAS_HIGH_DMA|DEV_HAS_MSI|DEV_HAS_POWER_CNTRL|DEV_HAS_PAUSEFRAME_TX_V2|DEV_HAS_STATISTICS_V2|DEV_HAS_TEST_EXTENDED|DEV_HAS_MGMT_UNIT|DEV_HAS_CORRECT_MACADDR|DEV_HAS_COLLISION_FIX|DEV_NEED_TX_LIMIT|DEV_HAS_GEAR_MODE,
+		.driver_data = DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER|DEV_HAS_CHECKSUM|DEV_HAS_HIGH_DMA|DEV_HAS_MSI|DEV_HAS_POWER_CNTRL|DEV_HAS_PAUSEFRAME_TX_V2|DEV_HAS_STATISTICS_V3|DEV_HAS_TEST_EXTENDED|DEV_HAS_MGMT_UNIT|DEV_HAS_CORRECT_MACADDR|DEV_HAS_COLLISION_FIX|DEV_NEED_TX_LIMIT|DEV_HAS_GEAR_MODE,
 	},
 	{	/* MCP79 Ethernet Controller */
 		PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NVENET_36),
-		.driver_data = DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER|DEV_HAS_CHECKSUM|DEV_HAS_HIGH_DMA|DEV_HAS_MSI|DEV_HAS_POWER_CNTRL|DEV_HAS_PAUSEFRAME_TX_V3|DEV_HAS_STATISTICS_V2|DEV_HAS_TEST_EXTENDED|DEV_HAS_MGMT_UNIT|DEV_HAS_CORRECT_MACADDR|DEV_HAS_COLLISION_FIX|DEV_NEED_TX_LIMIT|DEV_HAS_GEAR_MODE,
+		.driver_data = DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER|DEV_HAS_LARGEDESC|DEV_HAS_CHECKSUM|DEV_HAS_HIGH_DMA|DEV_HAS_MSI|DEV_HAS_POWER_CNTRL|DEV_HAS_PAUSEFRAME_TX_V3|DEV_HAS_STATISTICS_V3|DEV_HAS_TEST_EXTENDED|DEV_HAS_MGMT_UNIT|DEV_HAS_CORRECT_MACADDR|DEV_HAS_COLLISION_FIX|DEV_NEED_TX_LIMIT|DEV_HAS_GEAR_MODE,
 	},
 	{	/* MCP79 Ethernet Controller */
 		PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NVENET_37),
-		.driver_data = DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER|DEV_HAS_CHECKSUM|DEV_HAS_HIGH_DMA|DEV_HAS_MSI|DEV_HAS_POWER_CNTRL|DEV_HAS_PAUSEFRAME_TX_V3|DEV_HAS_STATISTICS_V2|DEV_HAS_TEST_EXTENDED|DEV_HAS_MGMT_UNIT|DEV_HAS_CORRECT_MACADDR|DEV_HAS_COLLISION_FIX|DEV_NEED_TX_LIMIT|DEV_HAS_GEAR_MODE,
+		.driver_data = DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER|DEV_HAS_LARGEDESC|DEV_HAS_CHECKSUM|DEV_HAS_HIGH_DMA|DEV_HAS_MSI|DEV_HAS_POWER_CNTRL|DEV_HAS_PAUSEFRAME_TX_V3|DEV_HAS_STATISTICS_V3|DEV_HAS_TEST_EXTENDED|DEV_HAS_MGMT_UNIT|DEV_HAS_CORRECT_MACADDR|DEV_HAS_COLLISION_FIX|DEV_NEED_TX_LIMIT|DEV_HAS_GEAR_MODE,
 	},
 	{	/* MCP79 Ethernet Controller */
 		PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NVENET_38),
-		.driver_data = DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER|DEV_HAS_CHECKSUM|DEV_HAS_HIGH_DMA|DEV_HAS_MSI|DEV_HAS_POWER_CNTRL|DEV_HAS_PAUSEFRAME_TX_V3|DEV_HAS_STATISTICS_V2|DEV_HAS_TEST_EXTENDED|DEV_HAS_MGMT_UNIT|DEV_HAS_CORRECT_MACADDR|DEV_HAS_COLLISION_FIX|DEV_NEED_TX_LIMIT|DEV_HAS_GEAR_MODE,
+		.driver_data = DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER|DEV_HAS_LARGEDESC|DEV_HAS_CHECKSUM|DEV_HAS_HIGH_DMA|DEV_HAS_MSI|DEV_HAS_POWER_CNTRL|DEV_HAS_PAUSEFRAME_TX_V3|DEV_HAS_STATISTICS_V3|DEV_HAS_TEST_EXTENDED|DEV_HAS_MGMT_UNIT|DEV_HAS_CORRECT_MACADDR|DEV_HAS_COLLISION_FIX|DEV_NEED_TX_LIMIT|DEV_HAS_GEAR_MODE,
 	},
 	{	/* MCP79 Ethernet Controller */
 		PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NVENET_39),
-		.driver_data = DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER|DEV_HAS_CHECKSUM|DEV_HAS_HIGH_DMA|DEV_HAS_MSI|DEV_HAS_POWER_CNTRL|DEV_HAS_PAUSEFRAME_TX_V3|DEV_HAS_STATISTICS_V2|DEV_HAS_TEST_EXTENDED|DEV_HAS_MGMT_UNIT|DEV_HAS_CORRECT_MACADDR|DEV_HAS_COLLISION_FIX|DEV_NEED_TX_LIMIT|DEV_HAS_GEAR_MODE,
+		.driver_data = DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER|DEV_HAS_LARGEDESC|DEV_HAS_CHECKSUM|DEV_HAS_HIGH_DMA|DEV_HAS_MSI|DEV_HAS_POWER_CNTRL|DEV_HAS_PAUSEFRAME_TX_V3|DEV_HAS_STATISTICS_V3|DEV_HAS_TEST_EXTENDED|DEV_HAS_MGMT_UNIT|DEV_HAS_CORRECT_MACADDR|DEV_HAS_COLLISION_FIX|DEV_NEED_TX_LIMIT|DEV_HAS_GEAR_MODE,
 	},
 	{0,},
 };
diff --git a/drivers/net/fs_enet/fs_enet-main.c b/drivers/net/fs_enet/fs_enet-main.c
index 9a51ec8293cc..9d461825bf4c 100644
--- a/drivers/net/fs_enet/fs_enet-main.c
+++ b/drivers/net/fs_enet/fs_enet-main.c
@@ -792,6 +792,10 @@ static int fs_enet_open(struct net_device *dev)
 	int r;
 	int err;
 
+	/* to initialize the fep->cur_rx,... */
+	/* not doing this, will cause a crash in fs_enet_rx_napi */
+	fs_init_bds(fep->ndev);
+
 	if (fep->fpi->use_napi)
 		napi_enable(&fep->napi);
 
@@ -1167,6 +1171,10 @@ static struct of_device_id fs_enet_match[] = {
 		.compatible = "fsl,cpm1-scc-enet",
 		.data = (void *)&fs_scc_ops,
 	},
+	{
+		.compatible = "fsl,cpm2-scc-enet",
+		.data = (void *)&fs_scc_ops,
+	},
 #endif
 #ifdef CONFIG_FS_ENET_HAS_FCC
 	{
diff --git a/drivers/net/fs_enet/mac-fcc.c b/drivers/net/fs_enet/mac-fcc.c
index 0a97fc2d97ec..1c7ef812a8e3 100644
--- a/drivers/net/fs_enet/mac-fcc.c
+++ b/drivers/net/fs_enet/mac-fcc.c
@@ -126,7 +126,7 @@ out:
 #define FCC_NAPI_RX_EVENT_MSK	(FCC_ENET_RXF | FCC_ENET_RXB)
 #define FCC_RX_EVENT		(FCC_ENET_RXF)
 #define FCC_TX_EVENT		(FCC_ENET_TXB)
-#define FCC_ERR_EVENT_MSK	(FCC_ENET_TXE | FCC_ENET_BSY)
+#define FCC_ERR_EVENT_MSK	(FCC_ENET_TXE)
 
 static int setup_data(struct net_device *dev)
 {
diff --git a/drivers/net/fs_enet/mac-scc.c b/drivers/net/fs_enet/mac-scc.c
index 029b3c7ef29c..22f50dd8b277 100644
--- a/drivers/net/fs_enet/mac-scc.c
+++ b/drivers/net/fs_enet/mac-scc.c
@@ -47,7 +47,6 @@
 #include "fs_enet.h"
 
 /*************************************************/
-
 #if defined(CONFIG_CPM1)
 /* for a 8xx __raw_xxx's are sufficient */
 #define __fs_out32(addr, x)	__raw_writel(x, addr)
@@ -62,6 +61,8 @@
 #define __fs_out16(addr, x)	out_be16(addr, x)
 #define __fs_in32(addr)	in_be32(addr)
 #define __fs_in16(addr)	in_be16(addr)
+#define __fs_out8(addr, x)	out_8(addr, x)
+#define __fs_in8(addr)	in_8(addr)
 #endif
 
 /* write, read, set bits, clear bits */
@@ -262,8 +263,13 @@ static void restart(struct net_device *dev)
 
 	/* Initialize function code registers for big-endian.
 	 */
+#ifndef CONFIG_NOT_COHERENT_CACHE
+	W8(ep, sen_genscc.scc_rfcr, SCC_EB | SCC_GBL);
+	W8(ep, sen_genscc.scc_tfcr, SCC_EB | SCC_GBL);
+#else
 	W8(ep, sen_genscc.scc_rfcr, SCC_EB);
 	W8(ep, sen_genscc.scc_tfcr, SCC_EB);
+#endif
 
 	/* Set maximum bytes per receive buffer.
 	 * This appears to be an Ethernet frame size, not the buffer
diff --git a/drivers/net/gianfar.c b/drivers/net/gianfar.c
index b8394cf134e8..4320a983a588 100644
--- a/drivers/net/gianfar.c
+++ b/drivers/net/gianfar.c
@@ -105,6 +105,7 @@ const char gfar_driver_version[] = "1.3";
 
 static int gfar_enet_open(struct net_device *dev);
 static int gfar_start_xmit(struct sk_buff *skb, struct net_device *dev);
+static void gfar_reset_task(struct work_struct *work);
 static void gfar_timeout(struct net_device *dev);
 static int gfar_close(struct net_device *dev);
 struct sk_buff *gfar_new_skb(struct net_device *dev);
@@ -134,9 +135,7 @@ static int gfar_process_frame(struct net_device *dev, struct sk_buff *skb, int l
 static void gfar_vlan_rx_register(struct net_device *netdev,
 		                struct vlan_group *grp);
 void gfar_halt(struct net_device *dev);
-#ifdef CONFIG_PM
 static void gfar_halt_nodisable(struct net_device *dev);
-#endif
 void gfar_start(struct net_device *dev);
 static void gfar_clear_exact_match(struct net_device *dev);
 static void gfar_set_mac_for_addr(struct net_device *dev, int num, u8 *addr);
@@ -211,6 +210,7 @@ static int gfar_probe(struct platform_device *pdev)
 	spin_lock_init(&priv->txlock);
 	spin_lock_init(&priv->rxlock);
 	spin_lock_init(&priv->bflock);
+	INIT_WORK(&priv->reset_task, gfar_reset_task);
 
 	platform_set_drvdata(pdev, dev);
 
@@ -414,9 +414,7 @@ static int gfar_suspend(struct platform_device *pdev, pm_message_t state)
 		spin_unlock(&priv->rxlock);
 		spin_unlock_irqrestore(&priv->txlock, flags);
 
-#ifdef CONFIG_GFAR_NAPI
 		napi_disable(&priv->napi);
-#endif
 
 		if (magic_packet) {
 			/* Enable interrupt on Magic Packet */
@@ -469,9 +467,7 @@ static int gfar_resume(struct platform_device *pdev)
 
 	netif_device_attach(dev);
 
-#ifdef CONFIG_GFAR_NAPI
 	napi_enable(&priv->napi);
-#endif
 
 	return 0;
 }
@@ -635,7 +631,6 @@ static void init_registers(struct net_device *dev)
 }
 
 
-#ifdef CONFIG_PM
 /* Halt the receive and transmit queues */
 static void gfar_halt_nodisable(struct net_device *dev)
 {
@@ -661,7 +656,6 @@ static void gfar_halt_nodisable(struct net_device *dev)
 			cpu_relax();
 	}
 }
-#endif
 
 /* Halt the receive and transmit queues */
 void gfar_halt(struct net_device *dev)
@@ -670,6 +664,8 @@ void gfar_halt(struct net_device *dev)
 	struct gfar __iomem *regs = priv->regs;
 	u32 tempval;
 
+	gfar_halt_nodisable(dev);
+
 	/* Disable Rx and Tx */
 	tempval = gfar_read(&regs->maccfg1);
 	tempval &= ~(MACCFG1_RX_EN | MACCFG1_TX_EN);
@@ -1218,6 +1214,7 @@ static int gfar_close(struct net_device *dev)
 
 	napi_disable(&priv->napi);
 
+	cancel_work_sync(&priv->reset_task);
 	stop_gfar(dev);
 
 	/* Disconnect from the PHY */
@@ -1332,13 +1329,16 @@ static int gfar_change_mtu(struct net_device *dev, int new_mtu)
 	return 0;
 }
 
-/* gfar_timeout gets called when a packet has not been
+/* gfar_reset_task gets scheduled when a packet has not been
  * transmitted after a set amount of time.
  * For now, assume that clearing out all the structures, and
- * starting over will fix the problem. */
-static void gfar_timeout(struct net_device *dev)
+ * starting over will fix the problem.
+ */
+static void gfar_reset_task(struct work_struct *work)
 {
-	dev->stats.tx_errors++;
+	struct gfar_private *priv = container_of(work, struct gfar_private,
+			reset_task);
+	struct net_device *dev = priv->dev;
 
 	if (dev->flags & IFF_UP) {
 		stop_gfar(dev);
@@ -1348,6 +1348,14 @@ static void gfar_timeout(struct net_device *dev)
 	netif_tx_schedule_all(dev);
 }
 
+static void gfar_timeout(struct net_device *dev)
+{
+	struct gfar_private *priv = netdev_priv(dev);
+
+	dev->stats.tx_errors++;
+	schedule_work(&priv->reset_task);
+}
+
 /* Interrupt Handler for Transmit complete */
 static int gfar_clean_tx_ring(struct net_device *dev)
 {
diff --git a/drivers/net/gianfar.h b/drivers/net/gianfar.h
index d59df98bd636..f46e9b63af13 100644
--- a/drivers/net/gianfar.h
+++ b/drivers/net/gianfar.h
@@ -756,6 +756,7 @@ struct gfar_private {
 
 	uint32_t msg_enable;
 
+	struct work_struct reset_task;
 	/* Network Statistics */
 	struct gfar_extra_stats extra_stats;
 };
diff --git a/drivers/net/gianfar_sysfs.c b/drivers/net/gianfar_sysfs.c
index 5116f68e01b9..782c20170082 100644
--- a/drivers/net/gianfar_sysfs.c
+++ b/drivers/net/gianfar_sysfs.c
@@ -33,7 +33,6 @@
 
 #include <asm/uaccess.h>
 #include <linux/module.h>
-#include <linux/version.h>
 
 #include "gianfar.h"
 
diff --git a/drivers/net/hamradio/mkiss.c b/drivers/net/hamradio/mkiss.c
index 3249df5e0f17..b8e25c4624d2 100644
--- a/drivers/net/hamradio/mkiss.c
+++ b/drivers/net/hamradio/mkiss.c
@@ -548,7 +548,7 @@ static int ax_xmit(struct sk_buff *skb, struct net_device *dev)
 		}
 
 		printk(KERN_ERR "mkiss: %s: transmit timed out, %s?\n", dev->name,
-		       (ax->tty->ops->chars_in_buffer(ax->tty) || ax->xleft) ?
+		       (tty_chars_in_buffer(ax->tty) || ax->xleft) ?
 		       "bad line quality" : "driver error");
 
 		ax->xleft = 0;
diff --git a/drivers/net/ibm_newemac/core.c b/drivers/net/ibm_newemac/core.c
index 2e720f26ca83..ccd9d9058f6d 100644
--- a/drivers/net/ibm_newemac/core.c
+++ b/drivers/net/ibm_newemac/core.c
@@ -663,9 +663,6 @@ static int emac_configure(struct emac_instance *dev)
 	if (emac_phy_gpcs(dev->phy.mode))
 		emac_mii_reset_phy(&dev->phy);
 
-	/* Required for Pause packet support in EMAC */
-	dev_mc_add(ndev, default_mcast_addr, sizeof(default_mcast_addr), 1);
-
 	return 0;
 }
 
@@ -1150,6 +1147,9 @@ static int emac_open(struct net_device *ndev)
 	} else
 		netif_carrier_on(dev->ndev);
 
+	/* Required for Pause packet support in EMAC */
+	dev_mc_add(ndev, default_mcast_addr, sizeof(default_mcast_addr), 1);
+
 	emac_configure(dev);
 	mal_poll_add(dev->mal, &dev->commac);
 	mal_enable_tx_channel(dev->mal, dev->mal_tx_chan);
diff --git a/drivers/net/ibmveth.c b/drivers/net/ibmveth.c
index 00527805e4f1..c2d57f836088 100644
--- a/drivers/net/ibmveth.c
+++ b/drivers/net/ibmveth.c
@@ -33,6 +33,7 @@
 */
 
 #include <linux/module.h>
+#include <linux/moduleparam.h>
 #include <linux/types.h>
 #include <linux/errno.h>
 #include <linux/ioport.h>
@@ -52,7 +53,9 @@
 #include <asm/hvcall.h>
 #include <asm/atomic.h>
 #include <asm/vio.h>
+#include <asm/iommu.h>
 #include <asm/uaccess.h>
+#include <asm/firmware.h>
 #include <linux/seq_file.h>
 
 #include "ibmveth.h"
@@ -94,8 +97,10 @@ static void ibmveth_proc_register_adapter(struct ibmveth_adapter *adapter);
 static void ibmveth_proc_unregister_adapter(struct ibmveth_adapter *adapter);
 static irqreturn_t ibmveth_interrupt(int irq, void *dev_instance);
 static void ibmveth_rxq_harvest_buffer(struct ibmveth_adapter *adapter);
+static unsigned long ibmveth_get_desired_dma(struct vio_dev *vdev);
 static struct kobj_type ktype_veth_pool;
 
+
 #ifdef CONFIG_PROC_FS
 #define IBMVETH_PROC_DIR "ibmveth"
 static struct proc_dir_entry *ibmveth_proc_dir;
@@ -226,16 +231,16 @@ static void ibmveth_replenish_buffer_pool(struct ibmveth_adapter *adapter, struc
 	u32 i;
 	u32 count = pool->size - atomic_read(&pool->available);
 	u32 buffers_added = 0;
+	struct sk_buff *skb;
+	unsigned int free_index, index;
+	u64 correlator;
+	unsigned long lpar_rc;
+	dma_addr_t dma_addr;
 
 	mb();
 
 	for(i = 0; i < count; ++i) {
-		struct sk_buff *skb;
-		unsigned int free_index, index;
-		u64 correlator;
 		union ibmveth_buf_desc desc;
-		unsigned long lpar_rc;
-		dma_addr_t dma_addr;
 
 		skb = alloc_skb(pool->buff_size, GFP_ATOMIC);
 
@@ -255,6 +260,9 @@ static void ibmveth_replenish_buffer_pool(struct ibmveth_adapter *adapter, struc
 		dma_addr = dma_map_single(&adapter->vdev->dev, skb->data,
 				pool->buff_size, DMA_FROM_DEVICE);
 
+		if (dma_mapping_error(&adapter->vdev->dev, dma_addr))
+			goto failure;
+
 		pool->free_map[free_index] = IBM_VETH_INVALID_MAP;
 		pool->dma_addr[index] = dma_addr;
 		pool->skbuff[index] = skb;
@@ -267,20 +275,9 @@ static void ibmveth_replenish_buffer_pool(struct ibmveth_adapter *adapter, struc
 
 		lpar_rc = h_add_logical_lan_buffer(adapter->vdev->unit_address, desc.desc);
 
-		if(lpar_rc != H_SUCCESS) {
-			pool->free_map[free_index] = index;
-			pool->skbuff[index] = NULL;
-			if (pool->consumer_index == 0)
-				pool->consumer_index = pool->size - 1;
-			else
-				pool->consumer_index--;
-			dma_unmap_single(&adapter->vdev->dev,
-					pool->dma_addr[index], pool->buff_size,
-					DMA_FROM_DEVICE);
-			dev_kfree_skb_any(skb);
-			adapter->replenish_add_buff_failure++;
-			break;
-		} else {
+		if (lpar_rc != H_SUCCESS)
+			goto failure;
+		else {
 			buffers_added++;
 			adapter->replenish_add_buff_success++;
 		}
@@ -288,6 +285,24 @@ static void ibmveth_replenish_buffer_pool(struct ibmveth_adapter *adapter, struc
 
 	mb();
 	atomic_add(buffers_added, &(pool->available));
+	return;
+
+failure:
+	pool->free_map[free_index] = index;
+	pool->skbuff[index] = NULL;
+	if (pool->consumer_index == 0)
+		pool->consumer_index = pool->size - 1;
+	else
+		pool->consumer_index--;
+	if (!dma_mapping_error(&adapter->vdev->dev, dma_addr))
+		dma_unmap_single(&adapter->vdev->dev,
+		                 pool->dma_addr[index], pool->buff_size,
+		                 DMA_FROM_DEVICE);
+	dev_kfree_skb_any(skb);
+	adapter->replenish_add_buff_failure++;
+
+	mb();
+	atomic_add(buffers_added, &(pool->available));
 }
 
 /* replenish routine */
@@ -297,7 +312,7 @@ static void ibmveth_replenish_task(struct ibmveth_adapter *adapter)
 
 	adapter->replenish_task_cycles++;
 
-	for(i = 0; i < IbmVethNumBufferPools; i++)
+	for (i = (IbmVethNumBufferPools - 1); i >= 0; i--)
 		if(adapter->rx_buff_pool[i].active)
 			ibmveth_replenish_buffer_pool(adapter,
 						     &adapter->rx_buff_pool[i]);
@@ -433,11 +448,11 @@ static void ibmveth_rxq_harvest_buffer(struct ibmveth_adapter *adapter)
 static void ibmveth_cleanup(struct ibmveth_adapter *adapter)
 {
 	int i;
+	struct device *dev = &adapter->vdev->dev;
 
 	if(adapter->buffer_list_addr != NULL) {
-		if(!dma_mapping_error(adapter->buffer_list_dma)) {
-			dma_unmap_single(&adapter->vdev->dev,
-					adapter->buffer_list_dma, 4096,
+		if (!dma_mapping_error(dev, adapter->buffer_list_dma)) {
+			dma_unmap_single(dev, adapter->buffer_list_dma, 4096,
 					DMA_BIDIRECTIONAL);
 			adapter->buffer_list_dma = DMA_ERROR_CODE;
 		}
@@ -446,9 +461,8 @@ static void ibmveth_cleanup(struct ibmveth_adapter *adapter)
 	}
 
 	if(adapter->filter_list_addr != NULL) {
-		if(!dma_mapping_error(adapter->filter_list_dma)) {
-			dma_unmap_single(&adapter->vdev->dev,
-					adapter->filter_list_dma, 4096,
+		if (!dma_mapping_error(dev, adapter->filter_list_dma)) {
+			dma_unmap_single(dev, adapter->filter_list_dma, 4096,
 					DMA_BIDIRECTIONAL);
 			adapter->filter_list_dma = DMA_ERROR_CODE;
 		}
@@ -457,8 +471,8 @@ static void ibmveth_cleanup(struct ibmveth_adapter *adapter)
 	}
 
 	if(adapter->rx_queue.queue_addr != NULL) {
-		if(!dma_mapping_error(adapter->rx_queue.queue_dma)) {
-			dma_unmap_single(&adapter->vdev->dev,
+		if (!dma_mapping_error(dev, adapter->rx_queue.queue_dma)) {
+			dma_unmap_single(dev,
 					adapter->rx_queue.queue_dma,
 					adapter->rx_queue.queue_len,
 					DMA_BIDIRECTIONAL);
@@ -472,6 +486,18 @@ static void ibmveth_cleanup(struct ibmveth_adapter *adapter)
 		if (adapter->rx_buff_pool[i].active)
 			ibmveth_free_buffer_pool(adapter,
 						 &adapter->rx_buff_pool[i]);
+
+	if (adapter->bounce_buffer != NULL) {
+		if (!dma_mapping_error(dev, adapter->bounce_buffer_dma)) {
+			dma_unmap_single(&adapter->vdev->dev,
+					adapter->bounce_buffer_dma,
+					adapter->netdev->mtu + IBMVETH_BUFF_OH,
+					DMA_BIDIRECTIONAL);
+			adapter->bounce_buffer_dma = DMA_ERROR_CODE;
+		}
+		kfree(adapter->bounce_buffer);
+		adapter->bounce_buffer = NULL;
+	}
 }
 
 static int ibmveth_register_logical_lan(struct ibmveth_adapter *adapter,
@@ -508,6 +534,7 @@ static int ibmveth_open(struct net_device *netdev)
 	int rc;
 	union ibmveth_buf_desc rxq_desc;
 	int i;
+	struct device *dev;
 
 	ibmveth_debug_printk("open starting\n");
 
@@ -536,17 +563,19 @@ static int ibmveth_open(struct net_device *netdev)
 		return -ENOMEM;
 	}
 
-	adapter->buffer_list_dma = dma_map_single(&adapter->vdev->dev,
+	dev = &adapter->vdev->dev;
+
+	adapter->buffer_list_dma = dma_map_single(dev,
 			adapter->buffer_list_addr, 4096, DMA_BIDIRECTIONAL);
-	adapter->filter_list_dma = dma_map_single(&adapter->vdev->dev,
+	adapter->filter_list_dma = dma_map_single(dev,
 			adapter->filter_list_addr, 4096, DMA_BIDIRECTIONAL);
-	adapter->rx_queue.queue_dma = dma_map_single(&adapter->vdev->dev,
+	adapter->rx_queue.queue_dma = dma_map_single(dev,
 			adapter->rx_queue.queue_addr,
 			adapter->rx_queue.queue_len, DMA_BIDIRECTIONAL);
 
-	if((dma_mapping_error(adapter->buffer_list_dma) ) ||
-	   (dma_mapping_error(adapter->filter_list_dma)) ||
-	   (dma_mapping_error(adapter->rx_queue.queue_dma))) {
+	if ((dma_mapping_error(dev, adapter->buffer_list_dma)) ||
+	    (dma_mapping_error(dev, adapter->filter_list_dma)) ||
+	    (dma_mapping_error(dev, adapter->rx_queue.queue_dma))) {
 		ibmveth_error_printk("unable to map filter or buffer list pages\n");
 		ibmveth_cleanup(adapter);
 		napi_disable(&adapter->napi);
@@ -607,6 +636,24 @@ static int ibmveth_open(struct net_device *netdev)
 		return rc;
 	}
 
+	adapter->bounce_buffer =
+	    kmalloc(netdev->mtu + IBMVETH_BUFF_OH, GFP_KERNEL);
+	if (!adapter->bounce_buffer) {
+		ibmveth_error_printk("unable to allocate bounce buffer\n");
+		ibmveth_cleanup(adapter);
+		napi_disable(&adapter->napi);
+		return -ENOMEM;
+	}
+	adapter->bounce_buffer_dma =
+	    dma_map_single(&adapter->vdev->dev, adapter->bounce_buffer,
+			   netdev->mtu + IBMVETH_BUFF_OH, DMA_BIDIRECTIONAL);
+	if (dma_mapping_error(dev, adapter->bounce_buffer_dma)) {
+		ibmveth_error_printk("unable to map bounce buffer\n");
+		ibmveth_cleanup(adapter);
+		napi_disable(&adapter->napi);
+		return -ENOMEM;
+	}
+
 	ibmveth_debug_printk("initial replenish cycle\n");
 	ibmveth_interrupt(netdev->irq, netdev);
 
@@ -853,10 +900,10 @@ static int ibmveth_start_xmit(struct sk_buff *skb, struct net_device *netdev)
 	unsigned int tx_packets = 0;
 	unsigned int tx_send_failed = 0;
 	unsigned int tx_map_failed = 0;
+	int used_bounce = 0;
+	unsigned long data_dma_addr;
 
 	desc.fields.flags_len = IBMVETH_BUF_VALID | skb->len;
-	desc.fields.address = dma_map_single(&adapter->vdev->dev, skb->data,
-					     skb->len, DMA_TO_DEVICE);
 
 	if (skb->ip_summed == CHECKSUM_PARTIAL &&
 	    ip_hdr(skb)->protocol != IPPROTO_TCP && skb_checksum_help(skb)) {
@@ -875,12 +922,19 @@ static int ibmveth_start_xmit(struct sk_buff *skb, struct net_device *netdev)
 		buf[1] = 0;
 	}
 
-	if (dma_mapping_error(desc.fields.address)) {
-		ibmveth_error_printk("tx: unable to map xmit buffer\n");
+	data_dma_addr = dma_map_single(&adapter->vdev->dev, skb->data,
+				       skb->len, DMA_TO_DEVICE);
+	if (dma_mapping_error(&adapter->vdev->dev, data_dma_addr)) {
+		if (!firmware_has_feature(FW_FEATURE_CMO))
+			ibmveth_error_printk("tx: unable to map xmit buffer\n");
+		skb_copy_from_linear_data(skb, adapter->bounce_buffer,
+					  skb->len);
+		desc.fields.address = adapter->bounce_buffer_dma;
 		tx_map_failed++;
-		tx_dropped++;
-		goto out;
-	}
+		used_bounce = 1;
+		wmb();
+	} else
+		desc.fields.address = data_dma_addr;
 
 	/* send the frame. Arbitrarily set retrycount to 1024 */
 	correlator = 0;
@@ -904,8 +958,9 @@ static int ibmveth_start_xmit(struct sk_buff *skb, struct net_device *netdev)
 		netdev->trans_start = jiffies;
 	}
 
-	dma_unmap_single(&adapter->vdev->dev, desc.fields.address,
-			 skb->len, DMA_TO_DEVICE);
+	if (!used_bounce)
+		dma_unmap_single(&adapter->vdev->dev, data_dma_addr,
+				 skb->len, DMA_TO_DEVICE);
 
 out:	spin_lock_irqsave(&adapter->stats_lock, flags);
 	netdev->stats.tx_dropped += tx_dropped;
@@ -1053,9 +1108,9 @@ static void ibmveth_set_multicast_list(struct net_device *netdev)
 static int ibmveth_change_mtu(struct net_device *dev, int new_mtu)
 {
 	struct ibmveth_adapter *adapter = dev->priv;
+	struct vio_dev *viodev = adapter->vdev;
 	int new_mtu_oh = new_mtu + IBMVETH_BUFF_OH;
-	int reinit = 0;
-	int i, rc;
+	int i;
 
 	if (new_mtu < IBMVETH_MAX_MTU)
 		return -EINVAL;
@@ -1067,23 +1122,34 @@ static int ibmveth_change_mtu(struct net_device *dev, int new_mtu)
 	if (i == IbmVethNumBufferPools)
 		return -EINVAL;
 
+	/* Deactivate all the buffer pools so that the next loop can activate
+	   only the buffer pools necessary to hold the new MTU */
+	for (i = 0; i < IbmVethNumBufferPools; i++)
+		if (adapter->rx_buff_pool[i].active) {
+			ibmveth_free_buffer_pool(adapter,
+						 &adapter->rx_buff_pool[i]);
+			adapter->rx_buff_pool[i].active = 0;
+		}
+
 	/* Look for an active buffer pool that can hold the new MTU */
 	for(i = 0; i<IbmVethNumBufferPools; i++) {
-		if (!adapter->rx_buff_pool[i].active) {
-			adapter->rx_buff_pool[i].active = 1;
-			reinit = 1;
-		}
+		adapter->rx_buff_pool[i].active = 1;
 
 		if (new_mtu_oh < adapter->rx_buff_pool[i].buff_size) {
-			if (reinit && netif_running(adapter->netdev)) {
+			if (netif_running(adapter->netdev)) {
 				adapter->pool_config = 1;
 				ibmveth_close(adapter->netdev);
 				adapter->pool_config = 0;
 				dev->mtu = new_mtu;
-				if ((rc = ibmveth_open(adapter->netdev)))
-					return rc;
-			} else
-				dev->mtu = new_mtu;
+				vio_cmo_set_dev_desired(viodev,
+						ibmveth_get_desired_dma
+						(viodev));
+				return ibmveth_open(adapter->netdev);
+			}
+			dev->mtu = new_mtu;
+			vio_cmo_set_dev_desired(viodev,
+						ibmveth_get_desired_dma
+						(viodev));
 			return 0;
 		}
 	}
@@ -1098,6 +1164,46 @@ static void ibmveth_poll_controller(struct net_device *dev)
 }
 #endif
 
+/**
+ * ibmveth_get_desired_dma - Calculate IO memory desired by the driver
+ *
+ * @vdev: struct vio_dev for the device whose desired IO mem is to be returned
+ *
+ * Return value:
+ *	Number of bytes of IO data the driver will need to perform well.
+ */
+static unsigned long ibmveth_get_desired_dma(struct vio_dev *vdev)
+{
+	struct net_device *netdev = dev_get_drvdata(&vdev->dev);
+	struct ibmveth_adapter *adapter;
+	unsigned long ret;
+	int i;
+	int rxqentries = 1;
+
+	/* netdev inits at probe time along with the structures we need below*/
+	if (netdev == NULL)
+		return IOMMU_PAGE_ALIGN(IBMVETH_IO_ENTITLEMENT_DEFAULT);
+
+	adapter = netdev_priv(netdev);
+
+	ret = IBMVETH_BUFF_LIST_SIZE + IBMVETH_FILT_LIST_SIZE;
+	ret += IOMMU_PAGE_ALIGN(netdev->mtu);
+
+	for (i = 0; i < IbmVethNumBufferPools; i++) {
+		/* add the size of the active receive buffers */
+		if (adapter->rx_buff_pool[i].active)
+			ret +=
+			    adapter->rx_buff_pool[i].size *
+			    IOMMU_PAGE_ALIGN(adapter->rx_buff_pool[i].
+			            buff_size);
+		rxqentries += adapter->rx_buff_pool[i].size;
+	}
+	/* add the size of the receive queue entries */
+	ret += IOMMU_PAGE_ALIGN(rxqentries * sizeof(struct ibmveth_rx_q_entry));
+
+	return ret;
+}
+
 static int __devinit ibmveth_probe(struct vio_dev *dev, const struct vio_device_id *id)
 {
 	int rc, i;
@@ -1242,6 +1348,8 @@ static int __devexit ibmveth_remove(struct vio_dev *dev)
 	ibmveth_proc_unregister_adapter(adapter);
 
 	free_netdev(netdev);
+	dev_set_drvdata(&dev->dev, NULL);
+
 	return 0;
 }
 
@@ -1402,14 +1510,15 @@ const char * buf, size_t count)
 				return -EPERM;
 			}
 
-			pool->active = 0;
 			if (netif_running(netdev)) {
 				adapter->pool_config = 1;
 				ibmveth_close(netdev);
+				pool->active = 0;
 				adapter->pool_config = 0;
 				if ((rc = ibmveth_open(netdev)))
 					return rc;
 			}
+			pool->active = 0;
 		}
 	} else if (attr == &veth_num_attr) {
 		if (value <= 0 || value > IBMVETH_MAX_POOL_COUNT)
@@ -1485,6 +1594,7 @@ static struct vio_driver ibmveth_driver = {
 	.id_table	= ibmveth_device_table,
 	.probe		= ibmveth_probe,
 	.remove		= ibmveth_remove,
+	.get_desired_dma = ibmveth_get_desired_dma,
 	.driver		= {
 		.name	= ibmveth_driver_name,
 		.owner	= THIS_MODULE,
diff --git a/drivers/net/ibmveth.h b/drivers/net/ibmveth.h
index 41f61cd18852..d28186948752 100644
--- a/drivers/net/ibmveth.h
+++ b/drivers/net/ibmveth.h
@@ -93,9 +93,12 @@ static inline long h_illan_attributes(unsigned long unit_address,
   plpar_hcall_norets(H_CHANGE_LOGICAL_LAN_MAC, ua, mac)
 
 #define IbmVethNumBufferPools 5
+#define IBMVETH_IO_ENTITLEMENT_DEFAULT 4243456 /* MTU of 1500 needs 4.2Mb */
 #define IBMVETH_BUFF_OH 22 /* Overhead: 14 ethernet header + 8 opaque handle */
 #define IBMVETH_MAX_MTU 68
 #define IBMVETH_MAX_POOL_COUNT 4096
+#define IBMVETH_BUFF_LIST_SIZE 4096
+#define IBMVETH_FILT_LIST_SIZE 4096
 #define IBMVETH_MAX_BUF_SIZE (1024 * 128)
 
 static int pool_size[] = { 512, 1024 * 2, 1024 * 16, 1024 * 32, 1024 * 64 };
@@ -143,6 +146,8 @@ struct ibmveth_adapter {
     struct ibmveth_rx_q rx_queue;
     int pool_config;
     int rx_csum;
+    void *bounce_buffer;
+    dma_addr_t bounce_buffer_dma;
 
     /* adapter specific stats */
     u64 replenish_task_cycles;
diff --git a/drivers/net/ifb.c b/drivers/net/ifb.c
index 0960e69b2da4..e4fbefc8c82f 100644
--- a/drivers/net/ifb.c
+++ b/drivers/net/ifb.c
@@ -69,18 +69,20 @@ static void ri_tasklet(unsigned long dev)
 	struct net_device *_dev = (struct net_device *)dev;
 	struct ifb_private *dp = netdev_priv(_dev);
 	struct net_device_stats *stats = &_dev->stats;
+	struct netdev_queue *txq;
 	struct sk_buff *skb;
 
+	txq = netdev_get_tx_queue(_dev, 0);
 	dp->st_task_enter++;
 	if ((skb = skb_peek(&dp->tq)) == NULL) {
 		dp->st_txq_refl_try++;
-		if (netif_tx_trylock(_dev)) {
+		if (__netif_tx_trylock(txq)) {
 			dp->st_rxq_enter++;
 			while ((skb = skb_dequeue(&dp->rq)) != NULL) {
 				skb_queue_tail(&dp->tq, skb);
 				dp->st_rx2tx_tran++;
 			}
-			netif_tx_unlock(_dev);
+			__netif_tx_unlock(txq);
 		} else {
 			/* reschedule */
 			dp->st_rxq_notenter++;
@@ -115,7 +117,7 @@ static void ri_tasklet(unsigned long dev)
 			BUG();
 	}
 
-	if (netif_tx_trylock(_dev)) {
+	if (__netif_tx_trylock(txq)) {
 		dp->st_rxq_check++;
 		if ((skb = skb_peek(&dp->rq)) == NULL) {
 			dp->tasklet_pending = 0;
@@ -123,10 +125,10 @@ static void ri_tasklet(unsigned long dev)
 				netif_wake_queue(_dev);
 		} else {
 			dp->st_rxq_rsch++;
-			netif_tx_unlock(_dev);
+			__netif_tx_unlock(txq);
 			goto resched;
 		}
-		netif_tx_unlock(_dev);
+		__netif_tx_unlock(txq);
 	} else {
 resched:
 		dp->tasklet_pending = 1;
diff --git a/drivers/net/igb/e1000_82575.c b/drivers/net/igb/e1000_82575.c
index e098f234770f..f5e2e7235fcb 100644
--- a/drivers/net/igb/e1000_82575.c
+++ b/drivers/net/igb/e1000_82575.c
@@ -87,7 +87,6 @@ static s32 igb_get_invariants_82575(struct e1000_hw *hw)
 	case E1000_DEV_ID_82576:
 	case E1000_DEV_ID_82576_FIBER:
 	case E1000_DEV_ID_82576_SERDES:
-	case E1000_DEV_ID_82576_QUAD_COPPER:
 		mac->type = e1000_82576;
 		break;
 	default:
@@ -850,7 +849,7 @@ void igb_update_mc_addr_list_82575(struct e1000_hw *hw,
 	for (; mc_addr_count > 0; mc_addr_count--) {
 		hash_value = igb_hash_mc_addr(hw, mc_addr_list);
 		hw_dbg("Hash value = 0x%03X\n", hash_value);
-		hw->mac.ops.mta_set(hw, hash_value);
+		igb_mta_set(hw, hash_value);
 		mc_addr_list += ETH_ALEN;
 	}
 }
@@ -1136,6 +1135,12 @@ static s32 igb_setup_fiber_serdes_link_82575(struct e1000_hw *hw)
 		       E1000_PCS_LCTL_FORCE_LINK;     /* Force Link */
 		hw_dbg("Configuring Forced Link; PCS_LCTL = 0x%08X\n", reg);
 	}
+
+	if (hw->mac.type == e1000_82576) {
+		reg |= E1000_PCS_LCTL_FORCE_FCTRL;
+		igb_force_mac_fc(hw);
+	}
+
 	wr32(E1000_PCS_LCTL, reg);
 
 	return 0;
@@ -1232,70 +1237,6 @@ out:
 }
 
 /**
- *  igb_translate_register_82576 - Translate the proper register offset
- *  @reg: e1000 register to be read
- *
- *  Registers in 82576 are located in different offsets than other adapters
- *  even though they function in the same manner.  This function takes in
- *  the name of the register to read and returns the correct offset for
- *  82576 silicon.
- **/
-u32 igb_translate_register_82576(u32 reg)
-{
-	/*
-	 * Some of the Kawela registers are located at different
-	 * offsets than they are in older adapters.
-	 * Despite the difference in location, the registers
-	 * function in the same manner.
-	 */
-	switch (reg) {
-	case E1000_TDBAL(0):
-		reg = 0x0E000;
-		break;
-	case E1000_TDBAH(0):
-		reg = 0x0E004;
-		break;
-	case E1000_TDLEN(0):
-		reg = 0x0E008;
-		break;
-	case E1000_TDH(0):
-		reg = 0x0E010;
-		break;
-	case E1000_TDT(0):
-		reg = 0x0E018;
-		break;
-	case E1000_TXDCTL(0):
-		reg = 0x0E028;
-		break;
-	case E1000_RDBAL(0):
-		reg = 0x0C000;
-		break;
-	case E1000_RDBAH(0):
-		reg = 0x0C004;
-		break;
-	case E1000_RDLEN(0):
-		reg = 0x0C008;
-		break;
-	case E1000_RDH(0):
-		reg = 0x0C010;
-		break;
-	case E1000_RDT(0):
-		reg = 0x0C018;
-		break;
-	case E1000_RXDCTL(0):
-		reg = 0x0C028;
-		break;
-	case E1000_SRRCTL(0):
-		reg = 0x0C00C;
-		break;
-	default:
-		break;
-	}
-
-	return reg;
-}
-
-/**
  *  igb_reset_init_script_82575 - Inits HW defaults after reset
  *  @hw: pointer to the HW structure
  *
diff --git a/drivers/net/igb/e1000_82575.h b/drivers/net/igb/e1000_82575.h
index 2f848e578a24..c1928b5efe1f 100644
--- a/drivers/net/igb/e1000_82575.h
+++ b/drivers/net/igb/e1000_82575.h
@@ -28,7 +28,6 @@
 #ifndef _E1000_82575_H_
 #define _E1000_82575_H_
 
-u32 igb_translate_register_82576(u32 reg);
 void igb_update_mc_addr_list_82575(struct e1000_hw*, u8*, u32, u32, u32);
 extern void igb_shutdown_fiber_serdes_link_82575(struct e1000_hw *hw);
 extern void igb_rx_fifo_flush_82575(struct e1000_hw *hw);
diff --git a/drivers/net/igb/e1000_defines.h b/drivers/net/igb/e1000_defines.h
index afdba3c9073c..ce700689fb57 100644
--- a/drivers/net/igb/e1000_defines.h
+++ b/drivers/net/igb/e1000_defines.h
@@ -257,6 +257,7 @@
 #define E1000_PCS_LCTL_FDV_FULL          8
 #define E1000_PCS_LCTL_FSD               0x10
 #define E1000_PCS_LCTL_FORCE_LINK        0x20
+#define E1000_PCS_LCTL_FORCE_FCTRL       0x80
 #define E1000_PCS_LCTL_AN_ENABLE         0x10000
 #define E1000_PCS_LCTL_AN_RESTART        0x20000
 #define E1000_PCS_LCTL_AN_TIMEOUT        0x40000
diff --git a/drivers/net/igb/e1000_hw.h b/drivers/net/igb/e1000_hw.h
index 19fa4ee96f2e..99504a600a80 100644
--- a/drivers/net/igb/e1000_hw.h
+++ b/drivers/net/igb/e1000_hw.h
@@ -41,7 +41,6 @@ struct e1000_hw;
 #define E1000_DEV_ID_82576                    0x10C9
 #define E1000_DEV_ID_82576_FIBER              0x10E6
 #define E1000_DEV_ID_82576_SERDES             0x10E7
-#define E1000_DEV_ID_82576_QUAD_COPPER        0x10E8
 #define E1000_DEV_ID_82575EB_COPPER           0x10A7
 #define E1000_DEV_ID_82575EB_FIBER_SERDES     0x10A9
 #define E1000_DEV_ID_82575GB_QUAD_COPPER      0x10D6
@@ -420,7 +419,6 @@ struct e1000_mac_operations {
 	void (*rar_set)(struct e1000_hw *, u8 *, u32);
 	s32  (*read_mac_addr)(struct e1000_hw *);
 	s32  (*get_speed_and_duplex)(struct e1000_hw *, u16 *, u16 *);
-	void (*mta_set)(struct e1000_hw *, u32);
 };
 
 struct e1000_phy_operations {
diff --git a/drivers/net/igb/e1000_mac.c b/drivers/net/igb/e1000_mac.c
index 20408aa1f916..e18747c70bec 100644
--- a/drivers/net/igb/e1000_mac.c
+++ b/drivers/net/igb/e1000_mac.c
@@ -144,34 +144,6 @@ void igb_write_vfta(struct e1000_hw *hw, u32 offset, u32 value)
 }
 
 /**
- *  igb_init_rx_addrs - Initialize receive address's
- *  @hw: pointer to the HW structure
- *  @rar_count: receive address registers
- *
- *  Setups the receive address registers by setting the base receive address
- *  register to the devices MAC address and clearing all the other receive
- *  address registers to 0.
- **/
-void igb_init_rx_addrs(struct e1000_hw *hw, u16 rar_count)
-{
-	u32 i;
-
-	/* Setup the receive address */
-	hw_dbg("Programming MAC Address into RAR[0]\n");
-
-	hw->mac.ops.rar_set(hw, hw->mac.addr, 0);
-
-	/* Zero out the other (rar_entry_count - 1) receive addresses */
-	hw_dbg("Clearing RAR[1-%u]\n", rar_count-1);
-	for (i = 1; i < rar_count; i++) {
-		array_wr32(E1000_RA, (i << 1), 0);
-		wrfl();
-		array_wr32(E1000_RA, ((i << 1) + 1), 0);
-		wrfl();
-	}
-}
-
-/**
  *  igb_check_alt_mac_addr - Check for alternate MAC addr
  *  @hw: pointer to the HW structure
  *
@@ -271,7 +243,7 @@ void igb_rar_set(struct e1000_hw *hw, u8 *addr, u32 index)
  *  current value is read, the new bit is OR'd in and the new value is
  *  written back into the register.
  **/
-static void igb_mta_set(struct e1000_hw *hw, u32 hash_value)
+void igb_mta_set(struct e1000_hw *hw, u32 hash_value)
 {
 	u32 hash_bit, hash_reg, mta;
 
@@ -297,60 +269,6 @@ static void igb_mta_set(struct e1000_hw *hw, u32 hash_value)
 }
 
 /**
- *  igb_update_mc_addr_list - Update Multicast addresses
- *  @hw: pointer to the HW structure
- *  @mc_addr_list: array of multicast addresses to program
- *  @mc_addr_count: number of multicast addresses to program
- *  @rar_used_count: the first RAR register free to program
- *  @rar_count: total number of supported Receive Address Registers
- *
- *  Updates the Receive Address Registers and Multicast Table Array.
- *  The caller must have a packed mc_addr_list of multicast addresses.
- *  The parameter rar_count will usually be hw->mac.rar_entry_count
- *  unless there are workarounds that change this.
- **/
-void igb_update_mc_addr_list(struct e1000_hw *hw,
-			       u8 *mc_addr_list, u32 mc_addr_count,
-			       u32 rar_used_count, u32 rar_count)
-{
-	u32 hash_value;
-	u32 i;
-
-	/*
-	 * Load the first set of multicast addresses into the exact
-	 * filters (RAR).  If there are not enough to fill the RAR
-	 * array, clear the filters.
-	 */
-	for (i = rar_used_count; i < rar_count; i++) {
-		if (mc_addr_count) {
-			hw->mac.ops.rar_set(hw, mc_addr_list, i);
-			mc_addr_count--;
-			mc_addr_list += ETH_ALEN;
-		} else {
-			array_wr32(E1000_RA, i << 1, 0);
-			wrfl();
-			array_wr32(E1000_RA, (i << 1) + 1, 0);
-			wrfl();
-		}
-	}
-
-	/* Clear the old settings from the MTA */
-	hw_dbg("Clearing MTA\n");
-	for (i = 0; i < hw->mac.mta_reg_count; i++) {
-		array_wr32(E1000_MTA, i, 0);
-		wrfl();
-	}
-
-	/* Load any remaining multicast addresses into the hash table. */
-	for (; mc_addr_count > 0; mc_addr_count--) {
-		hash_value = igb_hash_mc_addr(hw, mc_addr_list);
-		hw_dbg("Hash value = 0x%03X\n", hash_value);
-		igb_mta_set(hw, hash_value);
-		mc_addr_list += ETH_ALEN;
-	}
-}
-
-/**
  *  igb_hash_mc_addr - Generate a multicast hash value
  *  @hw: pointer to the HW structure
  *  @mc_addr: pointer to a multicast address
diff --git a/drivers/net/igb/e1000_mac.h b/drivers/net/igb/e1000_mac.h
index dc2f8cce15e7..cbee6af7d912 100644
--- a/drivers/net/igb/e1000_mac.h
+++ b/drivers/net/igb/e1000_mac.h
@@ -51,9 +51,6 @@ s32  igb_get_speed_and_duplex_copper(struct e1000_hw *hw, u16 *speed,
 				       u16 *duplex);
 s32  igb_id_led_init(struct e1000_hw *hw);
 s32  igb_led_off(struct e1000_hw *hw);
-void igb_update_mc_addr_list(struct e1000_hw *hw,
-			       u8 *mc_addr_list, u32 mc_addr_count,
-			       u32 rar_used_count, u32 rar_count);
 s32  igb_setup_link(struct e1000_hw *hw);
 s32  igb_validate_mdi_setting(struct e1000_hw *hw);
 s32  igb_write_8bit_ctrl_reg(struct e1000_hw *hw, u32 reg,
@@ -62,7 +59,7 @@ s32  igb_write_8bit_ctrl_reg(struct e1000_hw *hw, u32 reg,
 void igb_clear_hw_cntrs_base(struct e1000_hw *hw);
 void igb_clear_vfta(struct e1000_hw *hw);
 void igb_config_collision_dist(struct e1000_hw *hw);
-void igb_init_rx_addrs(struct e1000_hw *hw, u16 rar_count);
+void igb_mta_set(struct e1000_hw *hw, u32 hash_value);
 void igb_put_hw_semaphore(struct e1000_hw *hw);
 void igb_rar_set(struct e1000_hw *hw, u8 *addr, u32 index);
 s32  igb_check_alt_mac_addr(struct e1000_hw *hw);
diff --git a/drivers/net/igb/e1000_regs.h b/drivers/net/igb/e1000_regs.h
index b95093d24c09..95523af26056 100644
--- a/drivers/net/igb/e1000_regs.h
+++ b/drivers/net/igb/e1000_regs.h
@@ -262,9 +262,6 @@
 #define E1000_RETA(_i)  (0x05C00 + ((_i) * 4))
 #define E1000_RSSRK(_i) (0x05C80 + ((_i) * 4)) /* RSS Random Key - RW Array */
 
-#define E1000_REGISTER(a, reg) (((a)->mac.type < e1000_82576) \
-                               ? reg : e1000_translate_register_82576(reg))
-
 #define wr32(reg, value) (writel(value, hw->hw_addr + reg))
 #define rd32(reg) (readl(hw->hw_addr + reg))
 #define wrfl() ((void)rd32(E1000_STATUS))
diff --git a/drivers/net/igb/igb_ethtool.c b/drivers/net/igb/igb_ethtool.c
index 11aee1309951..58906c984be9 100644
--- a/drivers/net/igb/igb_ethtool.c
+++ b/drivers/net/igb/igb_ethtool.c
@@ -373,13 +373,17 @@ static void igb_get_regs(struct net_device *netdev,
 	regs_buff[12] = rd32(E1000_EECD);
 
 	/* Interrupt */
-	regs_buff[13] = rd32(E1000_EICR);
+	/* Reading EICS for EICR because they read the
+	 * same but EICS does not clear on read */
+	regs_buff[13] = rd32(E1000_EICS);
 	regs_buff[14] = rd32(E1000_EICS);
 	regs_buff[15] = rd32(E1000_EIMS);
 	regs_buff[16] = rd32(E1000_EIMC);
 	regs_buff[17] = rd32(E1000_EIAC);
 	regs_buff[18] = rd32(E1000_EIAM);
-	regs_buff[19] = rd32(E1000_ICR);
+	/* Reading ICS for ICR because they read the
+	 * same but ICS does not clear on read */
+	regs_buff[19] = rd32(E1000_ICS);
 	regs_buff[20] = rd32(E1000_ICS);
 	regs_buff[21] = rd32(E1000_IMS);
 	regs_buff[22] = rd32(E1000_IMC);
@@ -1746,15 +1750,6 @@ static int igb_wol_exclusion(struct igb_adapter *adapter,
 		/* return success for non excluded adapter ports */
 		retval = 0;
 		break;
-	case E1000_DEV_ID_82576_QUAD_COPPER:
-		/* quad port adapters only support WoL on port A */
-		if (!(adapter->flags & IGB_FLAG_QUAD_PORT_A)) {
-			wol->supported = 0;
-			break;
-		}
-		/* return success for non excluded adapter ports */
-		retval = 0;
-		break;
 	default:
 		/* dual port cards only support WoL on port A from now on
 		 * unless it was enabled in the eeprom for port B
diff --git a/drivers/net/igb/igb_main.c b/drivers/net/igb/igb_main.c
index b602c4dd0d14..634c4c9d87be 100644
--- a/drivers/net/igb/igb_main.c
+++ b/drivers/net/igb/igb_main.c
@@ -61,7 +61,6 @@ static struct pci_device_id igb_pci_tbl[] = {
 	{ PCI_VDEVICE(INTEL, E1000_DEV_ID_82576), board_82575 },
 	{ PCI_VDEVICE(INTEL, E1000_DEV_ID_82576_FIBER), board_82575 },
 	{ PCI_VDEVICE(INTEL, E1000_DEV_ID_82576_SERDES), board_82575 },
-	{ PCI_VDEVICE(INTEL, E1000_DEV_ID_82576_QUAD_COPPER), board_82575 },
 	{ PCI_VDEVICE(INTEL, E1000_DEV_ID_82575EB_COPPER), board_82575 },
 	{ PCI_VDEVICE(INTEL, E1000_DEV_ID_82575EB_FIBER_SERDES), board_82575 },
 	{ PCI_VDEVICE(INTEL, E1000_DEV_ID_82575GB_QUAD_COPPER), board_82575 },
@@ -311,7 +310,7 @@ static void igb_assign_vector(struct igb_adapter *adapter, int rx_queue,
 		array_wr32(E1000_MSIXBM(0), msix_vector, msixbm);
 		break;
 	case e1000_82576:
-		/* Kawela uses a table-based method for assigning vectors.
+		/* The 82576 uses a table-based method for assigning vectors.
 		   Each queue has a single entry in the table to which we write
 		   a vector number along with a "valid" bit.  Sadly, the layout
 		   of the table is somewhat counterintuitive. */
@@ -521,7 +520,7 @@ static void igb_set_interrupt_capability(struct igb_adapter *adapter)
 			      adapter->msix_entries,
 			      numvecs);
 	if (err == 0)
-		return;
+		goto out;
 
 	igb_reset_interrupt_capability(adapter);
 
@@ -531,7 +530,7 @@ msi_only:
 	adapter->num_tx_queues = 1;
 	if (!pci_enable_msi(adapter->pdev))
 		adapter->flags |= IGB_FLAG_HAS_MSI;
-
+out:
 	/* Notify the stack of the (possibly) reduced Tx Queue count. */
 	adapter->netdev->real_num_tx_queues = adapter->num_tx_queues;
 	return;
@@ -720,28 +719,6 @@ static void igb_get_hw_control(struct igb_adapter *adapter)
 			ctrl_ext | E1000_CTRL_EXT_DRV_LOAD);
 }
 
-static void igb_init_manageability(struct igb_adapter *adapter)
-{
-	struct e1000_hw *hw = &adapter->hw;
-
-	if (adapter->en_mng_pt) {
-		u32 manc2h = rd32(E1000_MANC2H);
-		u32 manc = rd32(E1000_MANC);
-
-		/* enable receiving management packets to the host */
-		/* this will probably generate destination unreachable messages
-		 * from the host OS, but the packets will be handled on SMBUS */
-		manc |= E1000_MANC_EN_MNG2HOST;
-#define E1000_MNG2HOST_PORT_623 (1 << 5)
-#define E1000_MNG2HOST_PORT_664 (1 << 6)
-		manc2h |= E1000_MNG2HOST_PORT_623;
-		manc2h |= E1000_MNG2HOST_PORT_664;
-		wr32(E1000_MANC2H, manc2h);
-
-		wr32(E1000_MANC, manc);
-	}
-}
-
 /**
  * igb_configure - configure the hardware for RX and TX
  * @adapter: private board structure
@@ -755,7 +732,6 @@ static void igb_configure(struct igb_adapter *adapter)
 	igb_set_multi(netdev);
 
 	igb_restore_vlan(adapter);
-	igb_init_manageability(adapter);
 
 	igb_configure_tx(adapter);
 	igb_setup_rctl(adapter);
@@ -1240,16 +1216,6 @@ static int __devinit igb_probe(struct pci_dev *pdev,
 		if (rd32(E1000_STATUS) & E1000_STATUS_FUNC_1)
 			adapter->eeprom_wol = 0;
 		break;
-	case E1000_DEV_ID_82576_QUAD_COPPER:
-		/* if quad port adapter, disable WoL on all but port A */
-		if (global_quad_port_a != 0)
-			adapter->eeprom_wol = 0;
-		else
-			adapter->flags |= IGB_FLAG_QUAD_PORT_A;
-		/* Reset for multiple quad port adapters */
-		if (++global_quad_port_a == 4)
-			global_quad_port_a = 0;
-		break;
 	}
 
 	/* initialize the wol settings based on the eeprom settings */
@@ -1372,7 +1338,8 @@ static void __devexit igb_remove(struct pci_dev *pdev)
 
 	unregister_netdev(netdev);
 
-	if (!igb_check_reset_block(&adapter->hw))
+	if (adapter->hw.phy.ops.reset_phy &&
+	    !igb_check_reset_block(&adapter->hw))
 		adapter->hw.phy.ops.reset_phy(&adapter->hw);
 
 	igb_remove_device(&adapter->hw);
@@ -2312,7 +2279,9 @@ static void igb_watchdog_task(struct work_struct *work)
 	struct igb_ring *tx_ring = adapter->tx_ring;
 	struct e1000_mac_info *mac = &adapter->hw.mac;
 	u32 link;
+	u32 eics = 0;
 	s32 ret_val;
+	int i;
 
 	if ((netif_carrier_ok(netdev)) &&
 	    (rd32(E1000_STATUS) & E1000_STATUS_LU))
@@ -2414,7 +2383,13 @@ link_up:
 	}
 
 	/* Cause software interrupt to ensure rx ring is cleaned */
-	wr32(E1000_ICS, E1000_ICS_RXDMT0);
+	if (adapter->msix_entries) {
+		for (i = 0; i < adapter->num_rx_queues; i++)
+			eics |= adapter->rx_ring[i].eims_value;
+		wr32(E1000_EICS, eics);
+	} else {
+		wr32(E1000_ICS, E1000_ICS_RXDMT0);
+	}
 
 	/* Force detection of hung controller every watchdog period */
 	tx_ring->detect_tx_hung = true;
@@ -4523,8 +4498,6 @@ static void igb_io_resume(struct pci_dev *pdev)
 	struct net_device *netdev = pci_get_drvdata(pdev);
 	struct igb_adapter *adapter = netdev_priv(netdev);
 
-	igb_init_manageability(adapter);
-
 	if (netif_running(netdev)) {
 		if (igb_up(adapter)) {
 			dev_err(&pdev->dev, "igb_up failed after reset\n");
diff --git a/drivers/net/ipg.h b/drivers/net/ipg.h
index e0e718ab4c2e..dd9318f19497 100644
--- a/drivers/net/ipg.h
+++ b/drivers/net/ipg.h
@@ -7,7 +7,6 @@
 #ifndef __LINUX_IPG_H
 #define __LINUX_IPG_H
 
-#include <linux/version.h>
 #include <linux/module.h>
 
 #include <linux/kernel.h>
@@ -21,7 +20,6 @@
 #include <linux/etherdevice.h>
 #include <linux/init.h>
 #include <linux/skbuff.h>
-#include <linux/version.h>
 #include <asm/bitops.h>
 
 /*
diff --git a/drivers/net/irda/act200l-sir.c b/drivers/net/irda/act200l-sir.c
index d8b89c74aabd..37ab8c855719 100644
--- a/drivers/net/irda/act200l-sir.c
+++ b/drivers/net/irda/act200l-sir.c
@@ -107,7 +107,7 @@ static int act200l_open(struct sir_dev *dev)
 {
 	struct qos_info *qos = &dev->qos;
 
-	IRDA_DEBUG(2, "%s()\n", __FUNCTION__ );
+	IRDA_DEBUG(2, "%s()\n", __func__ );
 
 	/* Power on the dongle */
 	sirdev_set_dtr_rts(dev, TRUE, TRUE);
@@ -124,7 +124,7 @@ static int act200l_open(struct sir_dev *dev)
 
 static int act200l_close(struct sir_dev *dev)
 {
-	IRDA_DEBUG(2, "%s()\n", __FUNCTION__ );
+	IRDA_DEBUG(2, "%s()\n", __func__ );
 
 	/* Power off the dongle */
 	sirdev_set_dtr_rts(dev, FALSE, FALSE);
@@ -143,7 +143,7 @@ static int act200l_change_speed(struct sir_dev *dev, unsigned speed)
 	u8 control[3];
 	int ret = 0;
 
-	IRDA_DEBUG(2, "%s()\n", __FUNCTION__ );
+	IRDA_DEBUG(2, "%s()\n", __func__ );
 
 	/* Clear DTR and set RTS to enter command mode */
 	sirdev_set_dtr_rts(dev, FALSE, TRUE);
@@ -212,7 +212,7 @@ static int act200l_reset(struct sir_dev *dev)
 	};
 	int ret = 0;
 
-	IRDA_DEBUG(2, "%s()\n", __FUNCTION__ );
+	IRDA_DEBUG(2, "%s()\n", __func__ );
 
 	switch (state) {
 	case SIRDEV_STATE_DONGLE_RESET:
@@ -240,7 +240,7 @@ static int act200l_reset(struct sir_dev *dev)
 		dev->speed = 9600;
 		break;
 	default:
-		IRDA_ERROR("%s(), unknown state %d\n", __FUNCTION__, state);
+		IRDA_ERROR("%s(), unknown state %d\n", __func__, state);
 		ret = -1;
 		break;
 	}
diff --git a/drivers/net/irda/actisys-sir.c b/drivers/net/irda/actisys-sir.c
index 736d2473b7e1..50b2141a6103 100644
--- a/drivers/net/irda/actisys-sir.c
+++ b/drivers/net/irda/actisys-sir.c
@@ -165,7 +165,7 @@ static int actisys_change_speed(struct sir_dev *dev, unsigned speed)
 	int ret = 0;
 	int i = 0;
 
-        IRDA_DEBUG(4, "%s(), speed=%d (was %d)\n", __FUNCTION__,
+        IRDA_DEBUG(4, "%s(), speed=%d (was %d)\n", __func__,
         	speed, dev->speed);
 
 	/* dongle was already resetted from irda_request state machine,
diff --git a/drivers/net/irda/ali-ircc.c b/drivers/net/irda/ali-ircc.c
index 083b0dd70fef..2ff181861d2d 100644
--- a/drivers/net/irda/ali-ircc.c
+++ b/drivers/net/irda/ali-ircc.c
@@ -152,7 +152,7 @@ static int __init ali_ircc_init(void)
 	int reg, revision;
 	int i = 0;
 	
-	IRDA_DEBUG(2, "%s(), ---------------- Start ----------------\n", __FUNCTION__);
+	IRDA_DEBUG(2, "%s(), ---------------- Start ----------------\n", __func__);
 
 	ret = platform_driver_register(&ali_ircc_driver);
         if (ret) {
@@ -166,7 +166,7 @@ static int __init ali_ircc_init(void)
 	/* Probe for all the ALi chipsets we know about */
 	for (chip= chips; chip->name; chip++, i++) 
 	{
-		IRDA_DEBUG(2, "%s(), Probing for %s ...\n", __FUNCTION__, chip->name);
+		IRDA_DEBUG(2, "%s(), Probing for %s ...\n", __func__, chip->name);
 				
 		/* Try all config registers for this chip */
 		for (cfg=0; cfg<2; cfg++)
@@ -196,11 +196,11 @@ static int __init ali_ircc_init(void)
 				
 			if (reg == chip->cid_value)
 			{
-				IRDA_DEBUG(2, "%s(), Chip found at 0x%03x\n", __FUNCTION__, cfg_base);
+				IRDA_DEBUG(2, "%s(), Chip found at 0x%03x\n", __func__, cfg_base);
 					   
 				outb(0x1F, cfg_base);
 				revision = inb(cfg_base+1);
-				IRDA_DEBUG(2, "%s(), Found %s chip, revision=%d\n", __FUNCTION__,
+				IRDA_DEBUG(2, "%s(), Found %s chip, revision=%d\n", __func__,
 					   chip->name, revision);					
 				
 				/* 
@@ -223,14 +223,14 @@ static int __init ali_ircc_init(void)
 			}
 			else
 			{
-				IRDA_DEBUG(2, "%s(), No %s chip at 0x%03x\n", __FUNCTION__, chip->name, cfg_base);
+				IRDA_DEBUG(2, "%s(), No %s chip at 0x%03x\n", __func__, chip->name, cfg_base);
 			}
 			/* Exit configuration */
 			outb(0xbb, cfg_base);
 		}
 	}		
 		
-	IRDA_DEBUG(2, "%s(), ----------------- End -----------------\n", __FUNCTION__);					   		
+	IRDA_DEBUG(2, "%s(), ----------------- End -----------------\n", __func__);
 
 	if (ret)
 		platform_driver_unregister(&ali_ircc_driver);
@@ -248,7 +248,7 @@ static void __exit ali_ircc_cleanup(void)
 {
 	int i;
 
-	IRDA_DEBUG(2, "%s(), ---------------- Start ----------------\n", __FUNCTION__);	
+	IRDA_DEBUG(2, "%s(), ---------------- Start ----------------\n", __func__);
 
 	for (i=0; i < ARRAY_SIZE(dev_self); i++) {
 		if (dev_self[i])
@@ -257,7 +257,7 @@ static void __exit ali_ircc_cleanup(void)
 	
 	platform_driver_unregister(&ali_ircc_driver);
 
-	IRDA_DEBUG(2, "%s(), ----------------- End -----------------\n", __FUNCTION__);
+	IRDA_DEBUG(2, "%s(), ----------------- End -----------------\n", __func__);
 }
 
 /*
@@ -273,11 +273,11 @@ static int ali_ircc_open(int i, chipio_t *info)
 	int dongle_id;
 	int err;
 			
-	IRDA_DEBUG(2, "%s(), ---------------- Start ----------------\n", __FUNCTION__);	
+	IRDA_DEBUG(2, "%s(), ---------------- Start ----------------\n", __func__);
 
 	if (i >= ARRAY_SIZE(dev_self)) {
 		IRDA_ERROR("%s(), maximum number of supported chips reached!\n",
-			   __FUNCTION__);
+			   __func__);
 		return -ENOMEM;
 	}
 	
@@ -288,7 +288,7 @@ static int ali_ircc_open(int i, chipio_t *info)
 	dev = alloc_irdadev(sizeof(*self));
 	if (dev == NULL) {
 		IRDA_ERROR("%s(), can't allocate memory for control block!\n",
-			   __FUNCTION__);
+			   __func__);
 		return -ENOMEM;
 	}
 
@@ -312,7 +312,7 @@ static int ali_ircc_open(int i, chipio_t *info)
 	/* Reserve the ioports that we need */
 	if (!request_region(self->io.fir_base, self->io.fir_ext,
 			    ALI_IRCC_DRIVER_NAME)) {
-		IRDA_WARNING("%s(), can't get iobase of 0x%03x\n", __FUNCTION__,
+		IRDA_WARNING("%s(), can't get iobase of 0x%03x\n", __func__,
 			self->io.fir_base);
 		err = -ENODEV;
 		goto err_out1;
@@ -370,19 +370,19 @@ static int ali_ircc_open(int i, chipio_t *info)
 
 	err = register_netdev(dev);
 	if (err) {
-		IRDA_ERROR("%s(), register_netdev() failed!\n", __FUNCTION__);
+		IRDA_ERROR("%s(), register_netdev() failed!\n", __func__);
 		goto err_out4;
 	}
 	IRDA_MESSAGE("IrDA: Registered device %s\n", dev->name);
 
 	/* Check dongle id */
 	dongle_id = ali_ircc_read_dongle_id(i, info);
-	IRDA_MESSAGE("%s(), %s, Found dongle: %s\n", __FUNCTION__,
+	IRDA_MESSAGE("%s(), %s, Found dongle: %s\n", __func__,
 		     ALI_IRCC_DRIVER_NAME, dongle_types[dongle_id]);
 		
 	self->io.dongle_id = dongle_id;
 
-	IRDA_DEBUG(2, "%s(), ----------------- End -----------------\n", __FUNCTION__);
+	IRDA_DEBUG(2, "%s(), ----------------- End -----------------\n", __func__);
 	
 	return 0;
 
@@ -411,7 +411,7 @@ static int __exit ali_ircc_close(struct ali_ircc_cb *self)
 {
 	int iobase;
 
-	IRDA_DEBUG(4, "%s(), ---------------- Start ----------------\n", __FUNCTION__);
+	IRDA_DEBUG(4, "%s(), ---------------- Start ----------------\n", __func__);
 
 	IRDA_ASSERT(self != NULL, return -1;);
 
@@ -421,7 +421,7 @@ static int __exit ali_ircc_close(struct ali_ircc_cb *self)
 	unregister_netdev(self->netdev);
 
 	/* Release the PORT that this driver is using */
-	IRDA_DEBUG(4, "%s(), Releasing Region %03x\n", __FUNCTION__, self->io.fir_base);
+	IRDA_DEBUG(4, "%s(), Releasing Region %03x\n", __func__, self->io.fir_base);
 	release_region(self->io.fir_base, self->io.fir_ext);
 
 	if (self->tx_buff.head)
@@ -435,7 +435,7 @@ static int __exit ali_ircc_close(struct ali_ircc_cb *self)
 	dev_self[self->index] = NULL;
 	free_netdev(self->netdev);
 	
-	IRDA_DEBUG(2, "%s(), ----------------- End -----------------\n", __FUNCTION__);
+	IRDA_DEBUG(2, "%s(), ----------------- End -----------------\n", __func__);
 	
 	return 0;
 }
@@ -478,7 +478,7 @@ static int ali_ircc_probe_53(ali_chip_t *chip, chipio_t *info)
 	int cfg_base = info->cfg_base;
 	int hi, low, reg;
 	
-	IRDA_DEBUG(2, "%s(), ---------------- Start ----------------\n", __FUNCTION__);
+	IRDA_DEBUG(2, "%s(), ---------------- Start ----------------\n", __func__);
 	
 	/* Enter Configuration */
 	outb(chip->entr1, cfg_base);
@@ -497,13 +497,13 @@ static int ali_ircc_probe_53(ali_chip_t *chip, chipio_t *info)
 	
 	info->sir_base = info->fir_base;
 	
-	IRDA_DEBUG(2, "%s(), probing fir_base=0x%03x\n", __FUNCTION__, info->fir_base);
+	IRDA_DEBUG(2, "%s(), probing fir_base=0x%03x\n", __func__, info->fir_base);
 		
 	/* Read IRQ control register */
 	outb(0x70, cfg_base);
 	reg = inb(cfg_base+1);
 	info->irq = reg & 0x0f;
-	IRDA_DEBUG(2, "%s(), probing irq=%d\n", __FUNCTION__, info->irq);
+	IRDA_DEBUG(2, "%s(), probing irq=%d\n", __func__, info->irq);
 	
 	/* Read DMA channel */
 	outb(0x74, cfg_base);
@@ -511,26 +511,26 @@ static int ali_ircc_probe_53(ali_chip_t *chip, chipio_t *info)
 	info->dma = reg & 0x07;
 	
 	if(info->dma == 0x04)
-		IRDA_WARNING("%s(), No DMA channel assigned !\n", __FUNCTION__);
+		IRDA_WARNING("%s(), No DMA channel assigned !\n", __func__);
 	else
-		IRDA_DEBUG(2, "%s(), probing dma=%d\n", __FUNCTION__, info->dma);
+		IRDA_DEBUG(2, "%s(), probing dma=%d\n", __func__, info->dma);
 	
 	/* Read Enabled Status */
 	outb(0x30, cfg_base);
 	reg = inb(cfg_base+1);
 	info->enabled = (reg & 0x80) && (reg & 0x01);
-	IRDA_DEBUG(2, "%s(), probing enabled=%d\n", __FUNCTION__, info->enabled);
+	IRDA_DEBUG(2, "%s(), probing enabled=%d\n", __func__, info->enabled);
 	
 	/* Read Power Status */
 	outb(0x22, cfg_base);
 	reg = inb(cfg_base+1);
 	info->suspended = (reg & 0x20);
-	IRDA_DEBUG(2, "%s(), probing suspended=%d\n", __FUNCTION__, info->suspended);
+	IRDA_DEBUG(2, "%s(), probing suspended=%d\n", __func__, info->suspended);
 	
 	/* Exit configuration */
 	outb(0xbb, cfg_base);
 		
-	IRDA_DEBUG(2, "%s(), ----------------- End -----------------\n", __FUNCTION__);	
+	IRDA_DEBUG(2, "%s(), ----------------- End -----------------\n", __func__);
 	
 	return 0;	
 }
@@ -548,7 +548,7 @@ static int ali_ircc_setup(chipio_t *info)
 	int version;
 	int iobase = info->fir_base;
 	
-	IRDA_DEBUG(2, "%s(), ---------------- Start ----------------\n", __FUNCTION__);
+	IRDA_DEBUG(2, "%s(), ---------------- Start ----------------\n", __func__);
 	
 	/* Locking comments :
 	 * Most operations here need to be protected. We are called before
@@ -609,7 +609,7 @@ static int ali_ircc_setup(chipio_t *info)
 	// outb(UART_IER_RDI, iobase+UART_IER); //benjamin 2000/11/23 01:25PM
 	// Turn on the interrupts in ali_ircc_net_open
 	
-	IRDA_DEBUG(2, "%s(), ----------------- End ------------------\n", __FUNCTION__);	
+	IRDA_DEBUG(2, "%s(), ----------------- End ------------------\n", __func__);
 	
 	return 0;
 }
@@ -626,7 +626,7 @@ static int ali_ircc_read_dongle_id (int i, chipio_t *info)
 	int dongle_id, reg;
 	int cfg_base = info->cfg_base;
 	
-	IRDA_DEBUG(2, "%s(), ---------------- Start ----------------\n", __FUNCTION__);
+	IRDA_DEBUG(2, "%s(), ---------------- Start ----------------\n", __func__);
 		
 	/* Enter Configuration */
 	outb(chips[i].entr1, cfg_base);
@@ -640,13 +640,13 @@ static int ali_ircc_read_dongle_id (int i, chipio_t *info)
 	outb(0xf0, cfg_base);
 	reg = inb(cfg_base+1);	
 	dongle_id = ((reg>>6)&0x02) | ((reg>>5)&0x01);
-	IRDA_DEBUG(2, "%s(), probing dongle_id=%d, dongle_types=%s\n", __FUNCTION__, 
+	IRDA_DEBUG(2, "%s(), probing dongle_id=%d, dongle_types=%s\n", __func__,
 		dongle_id, dongle_types[dongle_id]);
 	
 	/* Exit configuration */
 	outb(0xbb, cfg_base);
 			
-	IRDA_DEBUG(2, "%s(), ----------------- End ------------------\n", __FUNCTION__);	
+	IRDA_DEBUG(2, "%s(), ----------------- End ------------------\n", __func__);
 	
 	return dongle_id;
 }
@@ -663,7 +663,7 @@ static irqreturn_t ali_ircc_interrupt(int irq, void *dev_id)
 	struct ali_ircc_cb *self;
 	int ret;
 		
-	IRDA_DEBUG(2, "%s(), ---------------- Start ----------------\n", __FUNCTION__);
+	IRDA_DEBUG(2, "%s(), ---------------- Start ----------------\n", __func__);
 		
 	self = dev->priv;
 	
@@ -677,7 +677,7 @@ static irqreturn_t ali_ircc_interrupt(int irq, void *dev_id)
 		
 	spin_unlock(&self->lock);
 	
-	IRDA_DEBUG(2, "%s(), ----------------- End ------------------\n", __FUNCTION__);
+	IRDA_DEBUG(2, "%s(), ----------------- End ------------------\n", __func__);
 	return ret;
 }
 /*
@@ -691,7 +691,7 @@ static irqreturn_t ali_ircc_fir_interrupt(struct ali_ircc_cb *self)
 	__u8 eir, OldMessageCount;
 	int iobase, tmp;
 	
-	IRDA_DEBUG(1, "%s(), ---------------- Start ----------------\n", __FUNCTION__);
+	IRDA_DEBUG(1, "%s(), ---------------- Start ----------------\n", __func__);
 	
 	iobase = self->io.fir_base;
 	
@@ -704,10 +704,10 @@ static irqreturn_t ali_ircc_fir_interrupt(struct ali_ircc_cb *self)
 	//self->ier = inb(iobase+FIR_IER); 		2000/12/1 04:32PM
 	eir = self->InterruptID & self->ier; /* Mask out the interesting ones */ 
 	
-	IRDA_DEBUG(1, "%s(), self->InterruptID = %x\n", __FUNCTION__,self->InterruptID);
-	IRDA_DEBUG(1, "%s(), self->LineStatus = %x\n", __FUNCTION__,self->LineStatus);
-	IRDA_DEBUG(1, "%s(), self->ier = %x\n", __FUNCTION__,self->ier);
-	IRDA_DEBUG(1, "%s(), eir = %x\n", __FUNCTION__,eir);
+	IRDA_DEBUG(1, "%s(), self->InterruptID = %x\n", __func__,self->InterruptID);
+	IRDA_DEBUG(1, "%s(), self->LineStatus = %x\n", __func__,self->LineStatus);
+	IRDA_DEBUG(1, "%s(), self->ier = %x\n", __func__,self->ier);
+	IRDA_DEBUG(1, "%s(), eir = %x\n", __func__,eir);
 	
 	/* Disable interrupts */
 	 SetCOMInterrupts(self, FALSE);
@@ -718,7 +718,7 @@ static irqreturn_t ali_ircc_fir_interrupt(struct ali_ircc_cb *self)
 	{		
 		if (self->io.direction == IO_XMIT) /* TX */
 		{
-			IRDA_DEBUG(1, "%s(), ******* IIR_EOM (Tx) *******\n", __FUNCTION__);
+			IRDA_DEBUG(1, "%s(), ******* IIR_EOM (Tx) *******\n", __func__);
 			
 			if(ali_ircc_dma_xmit_complete(self))
 			{
@@ -737,23 +737,23 @@ static irqreturn_t ali_ircc_fir_interrupt(struct ali_ircc_cb *self)
 		}	
 		else /* RX */
 		{
-			IRDA_DEBUG(1, "%s(), ******* IIR_EOM (Rx) *******\n", __FUNCTION__);
+			IRDA_DEBUG(1, "%s(), ******* IIR_EOM (Rx) *******\n", __func__);
 			
 			if(OldMessageCount > ((self->LineStatus+1) & 0x07))
 			{
 				self->rcvFramesOverflow = TRUE;	
-				IRDA_DEBUG(1, "%s(), ******* self->rcvFramesOverflow = TRUE ******** \n", __FUNCTION__);
+				IRDA_DEBUG(1, "%s(), ******* self->rcvFramesOverflow = TRUE ******** \n", __func__);
 			}
 						
 			if (ali_ircc_dma_receive_complete(self))
 			{
-				IRDA_DEBUG(1, "%s(), ******* receive complete ******** \n", __FUNCTION__);
+				IRDA_DEBUG(1, "%s(), ******* receive complete ******** \n", __func__);
 				
 				self->ier = IER_EOM;				
 			}
 			else
 			{
-				IRDA_DEBUG(1, "%s(), ******* Not receive complete ******** \n", __FUNCTION__);
+				IRDA_DEBUG(1, "%s(), ******* Not receive complete ******** \n", __func__);
 				
 				self->ier = IER_EOM | IER_TIMER;								
 			}	
@@ -766,7 +766,7 @@ static irqreturn_t ali_ircc_fir_interrupt(struct ali_ircc_cb *self)
 		if(OldMessageCount > ((self->LineStatus+1) & 0x07))
 		{
 			self->rcvFramesOverflow = TRUE;	
-			IRDA_DEBUG(1, "%s(), ******* self->rcvFramesOverflow = TRUE ******* \n", __FUNCTION__);
+			IRDA_DEBUG(1, "%s(), ******* self->rcvFramesOverflow = TRUE ******* \n", __func__);
 		}
 		/* Disable Timer */
 		switch_bank(iobase, BANK1);
@@ -798,7 +798,7 @@ static irqreturn_t ali_ircc_fir_interrupt(struct ali_ircc_cb *self)
 	/* Restore Interrupt */	
 	SetCOMInterrupts(self, TRUE);	
 		
-	IRDA_DEBUG(1, "%s(), ----------------- End ---------------\n", __FUNCTION__);
+	IRDA_DEBUG(1, "%s(), ----------------- End ---------------\n", __func__);
 	return IRQ_RETVAL(eir);
 }
 
@@ -813,7 +813,7 @@ static irqreturn_t ali_ircc_sir_interrupt(struct ali_ircc_cb *self)
 	int iobase;
 	int iir, lsr;
 	
-	IRDA_DEBUG(2, "%s(), ---------------- Start ----------------\n", __FUNCTION__);
+	IRDA_DEBUG(2, "%s(), ---------------- Start ----------------\n", __func__);
 	
 	iobase = self->io.sir_base;
 
@@ -822,13 +822,13 @@ static irqreturn_t ali_ircc_sir_interrupt(struct ali_ircc_cb *self)
 		/* Clear interrupt */
 		lsr = inb(iobase+UART_LSR);
 
-		IRDA_DEBUG(4, "%s(), iir=%02x, lsr=%02x, iobase=%#x\n", __FUNCTION__, 
+		IRDA_DEBUG(4, "%s(), iir=%02x, lsr=%02x, iobase=%#x\n", __func__,
 			   iir, lsr, iobase);
 
 		switch (iir) 
 		{
 			case UART_IIR_RLSI:
-				IRDA_DEBUG(2, "%s(), RLSI\n", __FUNCTION__);
+				IRDA_DEBUG(2, "%s(), RLSI\n", __func__);
 				break;
 			case UART_IIR_RDI:
 				/* Receive interrupt */
@@ -842,14 +842,14 @@ static irqreturn_t ali_ircc_sir_interrupt(struct ali_ircc_cb *self)
 				}				
 				break;
 			default:
-				IRDA_DEBUG(0, "%s(), unhandled IIR=%#x\n", __FUNCTION__, iir);
+				IRDA_DEBUG(0, "%s(), unhandled IIR=%#x\n", __func__, iir);
 				break;
 		} 
 		
 	}
 	
 	
-	IRDA_DEBUG(2, "%s(), ----------------- End ------------------\n", __FUNCTION__);	
+	IRDA_DEBUG(2, "%s(), ----------------- End ------------------\n", __func__);
 
 	return IRQ_RETVAL(iir);
 }
@@ -866,7 +866,7 @@ static void ali_ircc_sir_receive(struct ali_ircc_cb *self)
 	int boguscount = 0;
 	int iobase;
 	
-	IRDA_DEBUG(2, "%s(), ---------------- Start ----------------\n", __FUNCTION__);
+	IRDA_DEBUG(2, "%s(), ---------------- Start ----------------\n", __func__);
 	IRDA_ASSERT(self != NULL, return;);
 
 	iobase = self->io.sir_base;
@@ -881,12 +881,12 @@ static void ali_ircc_sir_receive(struct ali_ircc_cb *self)
 
 		/* Make sure we don't stay here too long */
 		if (boguscount++ > 32) {
-			IRDA_DEBUG(2,"%s(), breaking!\n", __FUNCTION__);
+			IRDA_DEBUG(2,"%s(), breaking!\n", __func__);
 			break;
 		}
 	} while (inb(iobase+UART_LSR) & UART_LSR_DR);	
 	
-	IRDA_DEBUG(2, "%s(), ----------------- End ------------------\n", __FUNCTION__ );	
+	IRDA_DEBUG(2, "%s(), ----------------- End ------------------\n", __func__ );
 }
 
 /*
@@ -903,7 +903,7 @@ static void ali_ircc_sir_write_wakeup(struct ali_ircc_cb *self)
 
 	IRDA_ASSERT(self != NULL, return;);
 
-	IRDA_DEBUG(2, "%s(), ---------------- Start ----------------\n", __FUNCTION__ );
+	IRDA_DEBUG(2, "%s(), ---------------- Start ----------------\n", __func__ );
 	
 	iobase = self->io.sir_base;
 
@@ -922,16 +922,16 @@ static void ali_ircc_sir_write_wakeup(struct ali_ircc_cb *self)
 		{
 			/* We must wait until all data are gone */
 			while(!(inb(iobase+UART_LSR) & UART_LSR_TEMT))
-				IRDA_DEBUG(1, "%s(), UART_LSR_THRE\n", __FUNCTION__ );
+				IRDA_DEBUG(1, "%s(), UART_LSR_THRE\n", __func__ );
 			
-			IRDA_DEBUG(1, "%s(), Changing speed! self->new_speed = %d\n", __FUNCTION__ , self->new_speed);
+			IRDA_DEBUG(1, "%s(), Changing speed! self->new_speed = %d\n", __func__ , self->new_speed);
 			ali_ircc_change_speed(self, self->new_speed);
 			self->new_speed = 0;			
 			
 			// benjamin 2000/11/10 06:32PM
 			if (self->io.speed > 115200)
 			{
-				IRDA_DEBUG(2, "%s(), ali_ircc_change_speed from UART_LSR_TEMT \n", __FUNCTION__ );				
+				IRDA_DEBUG(2, "%s(), ali_ircc_change_speed from UART_LSR_TEMT \n", __func__ );
 					
 				self->ier = IER_EOM;
 				// SetCOMInterrupts(self, TRUE);							
@@ -949,7 +949,7 @@ static void ali_ircc_sir_write_wakeup(struct ali_ircc_cb *self)
 		outb(UART_IER_RDI, iobase+UART_IER);
 	}
 		
-	IRDA_DEBUG(2, "%s(), ----------------- End ------------------\n", __FUNCTION__ );	
+	IRDA_DEBUG(2, "%s(), ----------------- End ------------------\n", __func__ );
 }
 
 static void ali_ircc_change_speed(struct ali_ircc_cb *self, __u32 baud)
@@ -957,9 +957,9 @@ static void ali_ircc_change_speed(struct ali_ircc_cb *self, __u32 baud)
 	struct net_device *dev = self->netdev;
 	int iobase;
 	
-	IRDA_DEBUG(1, "%s(), ---------------- Start ----------------\n", __FUNCTION__ );
+	IRDA_DEBUG(1, "%s(), ---------------- Start ----------------\n", __func__ );
 	
-	IRDA_DEBUG(2, "%s(), setting speed = %d \n", __FUNCTION__ , baud);
+	IRDA_DEBUG(2, "%s(), setting speed = %d \n", __func__ , baud);
 	
 	/* This function *must* be called with irq off and spin-lock.
 	 * - Jean II */
@@ -998,7 +998,7 @@ static void ali_ircc_change_speed(struct ali_ircc_cb *self, __u32 baud)
 		
 	netif_wake_queue(self->netdev);	
 	
-	IRDA_DEBUG(2, "%s(), ----------------- End ------------------\n", __FUNCTION__ );	
+	IRDA_DEBUG(2, "%s(), ----------------- End ------------------\n", __func__ );
 }
 
 static void ali_ircc_fir_change_speed(struct ali_ircc_cb *priv, __u32 baud)
@@ -1008,14 +1008,14 @@ static void ali_ircc_fir_change_speed(struct ali_ircc_cb *priv, __u32 baud)
 	struct ali_ircc_cb *self = (struct ali_ircc_cb *) priv;
 	struct net_device *dev;
 
-	IRDA_DEBUG(1, "%s(), ---------------- Start ----------------\n", __FUNCTION__ );
+	IRDA_DEBUG(1, "%s(), ---------------- Start ----------------\n", __func__ );
 		
 	IRDA_ASSERT(self != NULL, return;);
 
 	dev = self->netdev;
 	iobase = self->io.fir_base;
 	
-	IRDA_DEBUG(1, "%s(), self->io.speed = %d, change to speed = %d\n", __FUNCTION__ ,self->io.speed,baud);
+	IRDA_DEBUG(1, "%s(), self->io.speed = %d, change to speed = %d\n", __func__ ,self->io.speed,baud);
 	
 	/* Come from SIR speed */
 	if(self->io.speed <=115200)
@@ -1029,7 +1029,7 @@ static void ali_ircc_fir_change_speed(struct ali_ircc_cb *priv, __u32 baud)
 	// Set Dongle Speed mode
 	ali_ircc_change_dongle_speed(self, baud);
 		
-	IRDA_DEBUG(1, "%s(), ----------------- End ------------------\n", __FUNCTION__ );	
+	IRDA_DEBUG(1, "%s(), ----------------- End ------------------\n", __func__ );
 }
 
 /*
@@ -1047,9 +1047,9 @@ static void ali_ircc_sir_change_speed(struct ali_ircc_cb *priv, __u32 speed)
 	int lcr;    /* Line control reg */
 	int divisor;
 
-	IRDA_DEBUG(1, "%s(), ---------------- Start ----------------\n", __FUNCTION__ );
+	IRDA_DEBUG(1, "%s(), ---------------- Start ----------------\n", __func__ );
 	
-	IRDA_DEBUG(1, "%s(), Setting speed to: %d\n", __FUNCTION__ , speed);
+	IRDA_DEBUG(1, "%s(), Setting speed to: %d\n", __func__ , speed);
 
 	IRDA_ASSERT(self != NULL, return;);
 
@@ -1103,7 +1103,7 @@ static void ali_ircc_sir_change_speed(struct ali_ircc_cb *priv, __u32 speed)
 	
 	spin_unlock_irqrestore(&self->lock, flags);
 	
-	IRDA_DEBUG(1, "%s(), ----------------- End ------------------\n", __FUNCTION__ );	
+	IRDA_DEBUG(1, "%s(), ----------------- End ------------------\n", __func__ );
 }
 
 static void ali_ircc_change_dongle_speed(struct ali_ircc_cb *priv, int speed)
@@ -1113,14 +1113,14 @@ static void ali_ircc_change_dongle_speed(struct ali_ircc_cb *priv, int speed)
 	int iobase,dongle_id;
 	int tmp = 0;
 			
-	IRDA_DEBUG(1, "%s(), ---------------- Start ----------------\n", __FUNCTION__ );	
+	IRDA_DEBUG(1, "%s(), ---------------- Start ----------------\n", __func__ );
 	
 	iobase = self->io.fir_base; 	/* or iobase = self->io.sir_base; */
 	dongle_id = self->io.dongle_id;
 	
 	/* We are already locked, no need to do it again */
 		
-	IRDA_DEBUG(1, "%s(), Set Speed for %s , Speed = %d\n", __FUNCTION__ , dongle_types[dongle_id], speed);		
+	IRDA_DEBUG(1, "%s(), Set Speed for %s , Speed = %d\n", __func__ , dongle_types[dongle_id], speed);
 	
 	switch_bank(iobase, BANK2);
 	tmp = inb(iobase+FIR_IRDA_CR);
@@ -1284,7 +1284,7 @@ static void ali_ircc_change_dongle_speed(struct ali_ircc_cb *priv, int speed)
 			
 	switch_bank(iobase, BANK0);
 	
-	IRDA_DEBUG(1, "%s(), ----------------- End ------------------\n", __FUNCTION__ );		
+	IRDA_DEBUG(1, "%s(), ----------------- End ------------------\n", __func__ );
 }
 
 /*
@@ -1297,11 +1297,11 @@ static int ali_ircc_sir_write(int iobase, int fifo_size, __u8 *buf, int len)
 {
 	int actual = 0;
 	
-	IRDA_DEBUG(2, "%s(), ---------------- Start ----------------\n", __FUNCTION__ );
+	IRDA_DEBUG(2, "%s(), ---------------- Start ----------------\n", __func__ );
 		
 	/* Tx FIFO should be empty! */
 	if (!(inb(iobase+UART_LSR) & UART_LSR_THRE)) {
-		IRDA_DEBUG(0, "%s(), failed, fifo not empty!\n", __FUNCTION__ );
+		IRDA_DEBUG(0, "%s(), failed, fifo not empty!\n", __func__ );
 		return 0;
 	}
         
@@ -1313,7 +1313,7 @@ static int ali_ircc_sir_write(int iobase, int fifo_size, __u8 *buf, int len)
 		actual++;
 	}
 	
-        IRDA_DEBUG(2, "%s(), ----------------- End ------------------\n", __FUNCTION__ );	
+        IRDA_DEBUG(2, "%s(), ----------------- End ------------------\n", __func__ );
 	return actual;
 }
 
@@ -1329,7 +1329,7 @@ static int ali_ircc_net_open(struct net_device *dev)
 	int iobase;
 	char hwname[32];
 		
-	IRDA_DEBUG(2, "%s(), ---------------- Start ----------------\n", __FUNCTION__ );
+	IRDA_DEBUG(2, "%s(), ---------------- Start ----------------\n", __func__ );
 	
 	IRDA_ASSERT(dev != NULL, return -1;);
 	
@@ -1375,7 +1375,7 @@ static int ali_ircc_net_open(struct net_device *dev)
 	 */
 	self->irlap = irlap_open(dev, &self->qos, hwname);
 		
-	IRDA_DEBUG(2, "%s(), ----------------- End ------------------\n", __FUNCTION__ );	
+	IRDA_DEBUG(2, "%s(), ----------------- End ------------------\n", __func__ );
 	
 	return 0;
 }
@@ -1392,7 +1392,7 @@ static int ali_ircc_net_close(struct net_device *dev)
 	struct ali_ircc_cb *self;
 	//int iobase;
 			
-	IRDA_DEBUG(4, "%s(), ---------------- Start ----------------\n", __FUNCTION__ );
+	IRDA_DEBUG(4, "%s(), ---------------- Start ----------------\n", __func__ );
 		
 	IRDA_ASSERT(dev != NULL, return -1;);
 
@@ -1415,7 +1415,7 @@ static int ali_ircc_net_close(struct net_device *dev)
 	free_irq(self->io.irq, dev);
 	free_dma(self->io.dma);
 
-	IRDA_DEBUG(2, "%s(), ----------------- End ------------------\n", __FUNCTION__ );	
+	IRDA_DEBUG(2, "%s(), ----------------- End ------------------\n", __func__ );
 	
 	return 0;
 }
@@ -1434,7 +1434,7 @@ static int ali_ircc_fir_hard_xmit(struct sk_buff *skb, struct net_device *dev)
 	__u32 speed;
 	int mtt, diff;
 	
-	IRDA_DEBUG(1, "%s(), ---------------- Start -----------------\n", __FUNCTION__ );	
+	IRDA_DEBUG(1, "%s(), ---------------- Start -----------------\n", __func__ );
 	
 	self = (struct ali_ircc_cb *) dev->priv;
 	iobase = self->io.fir_base;
@@ -1488,7 +1488,7 @@ static int ali_ircc_fir_hard_xmit(struct sk_buff *skb, struct net_device *dev)
 			diff = self->now.tv_usec - self->stamp.tv_usec;
 			/* self->stamp is set from ali_ircc_dma_receive_complete() */
 							
-			IRDA_DEBUG(1, "%s(), ******* diff = %d ******* \n", __FUNCTION__ , diff);	
+			IRDA_DEBUG(1, "%s(), ******* diff = %d ******* \n", __func__ , diff);
 			
 			if (diff < 0) 
 				diff += 1000000;
@@ -1510,7 +1510,7 @@ static int ali_ircc_fir_hard_xmit(struct sk_buff *skb, struct net_device *dev)
 					/* Adjust for timer resolution */
 					mtt = (mtt+250) / 500; 	/* 4 discard, 5 get advanced, Let's round off */
 					
-					IRDA_DEBUG(1, "%s(), ************** mtt = %d ***********\n", __FUNCTION__ , mtt);	
+					IRDA_DEBUG(1, "%s(), ************** mtt = %d ***********\n", __func__ , mtt);
 					
 					/* Setup timer */
 					if (mtt == 1) /* 500 us */
@@ -1567,7 +1567,7 @@ static int ali_ircc_fir_hard_xmit(struct sk_buff *skb, struct net_device *dev)
 	spin_unlock_irqrestore(&self->lock, flags);
 	dev_kfree_skb(skb);
 
-	IRDA_DEBUG(1, "%s(), ----------------- End ------------------\n", __FUNCTION__ );	
+	IRDA_DEBUG(1, "%s(), ----------------- End ------------------\n", __func__ );
 	return 0;	
 }
 
@@ -1578,7 +1578,7 @@ static void ali_ircc_dma_xmit(struct ali_ircc_cb *self)
 	unsigned char FIFO_OPTI, Hi, Lo;
 	
 	
-	IRDA_DEBUG(1, "%s(), ---------------- Start -----------------\n", __FUNCTION__ );	
+	IRDA_DEBUG(1, "%s(), ---------------- Start -----------------\n", __func__ );
 	
 	iobase = self->io.fir_base;
 	
@@ -1629,7 +1629,7 @@ static void ali_ircc_dma_xmit(struct ali_ircc_cb *self)
 	tmp = inb(iobase+FIR_LCR_B);
 	tmp &= ~0x20; // Disable SIP
 	outb(((unsigned char)(tmp & 0x3f) | LCR_B_TX_MODE) & ~LCR_B_BW, iobase+FIR_LCR_B);
-	IRDA_DEBUG(1, "%s(), ******* Change to TX mode: FIR_LCR_B = 0x%x ******* \n", __FUNCTION__ , inb(iobase+FIR_LCR_B));
+	IRDA_DEBUG(1, "%s(), ******* Change to TX mode: FIR_LCR_B = 0x%x ******* \n", __func__ , inb(iobase+FIR_LCR_B));
 	
 	outb(0, iobase+FIR_LSR);
 			
@@ -1639,7 +1639,7 @@ static void ali_ircc_dma_xmit(struct ali_ircc_cb *self)
 	
 	switch_bank(iobase, BANK0); 
 	
-	IRDA_DEBUG(1, "%s(), ----------------- End ------------------\n", __FUNCTION__ );
+	IRDA_DEBUG(1, "%s(), ----------------- End ------------------\n", __func__ );
 }
 
 static int  ali_ircc_dma_xmit_complete(struct ali_ircc_cb *self)
@@ -1647,7 +1647,7 @@ static int  ali_ircc_dma_xmit_complete(struct ali_ircc_cb *self)
 	int iobase;
 	int ret = TRUE;
 	
-	IRDA_DEBUG(1, "%s(), ---------------- Start -----------------\n", __FUNCTION__ );	
+	IRDA_DEBUG(1, "%s(), ---------------- Start -----------------\n", __func__ );
 	
 	iobase = self->io.fir_base;
 	
@@ -1660,7 +1660,7 @@ static int  ali_ircc_dma_xmit_complete(struct ali_ircc_cb *self)
 	if((inb(iobase+FIR_LSR) & LSR_FRAME_ABORT) == LSR_FRAME_ABORT)
 	
 	{
-		IRDA_ERROR("%s(), ********* LSR_FRAME_ABORT *********\n", __FUNCTION__);	
+		IRDA_ERROR("%s(), ********* LSR_FRAME_ABORT *********\n", __func__);
 		self->stats.tx_errors++;
 		self->stats.tx_fifo_errors++;		
 	}
@@ -1703,7 +1703,7 @@ static int  ali_ircc_dma_xmit_complete(struct ali_ircc_cb *self)
 		
 	switch_bank(iobase, BANK0); 
 	
-	IRDA_DEBUG(1, "%s(), ----------------- End ------------------\n", __FUNCTION__ );	
+	IRDA_DEBUG(1, "%s(), ----------------- End ------------------\n", __func__ );
 	return ret;
 }
 
@@ -1718,7 +1718,7 @@ static int ali_ircc_dma_receive(struct ali_ircc_cb *self)
 {
 	int iobase, tmp;
 	
-	IRDA_DEBUG(1, "%s(), ---------------- Start -----------------\n", __FUNCTION__ );	
+	IRDA_DEBUG(1, "%s(), ---------------- Start -----------------\n", __func__ );
 	
 	iobase = self->io.fir_base;
 	
@@ -1756,7 +1756,7 @@ static int ali_ircc_dma_receive(struct ali_ircc_cb *self)
 	//switch_bank(iobase, BANK0);
 	tmp = inb(iobase+FIR_LCR_B);
 	outb((unsigned char)(tmp &0x3f) | LCR_B_RX_MODE | LCR_B_BW , iobase + FIR_LCR_B); // 2000/12/1 05:16PM
-	IRDA_DEBUG(1, "%s(), *** Change To RX mode: FIR_LCR_B = 0x%x *** \n", __FUNCTION__ , inb(iobase+FIR_LCR_B));
+	IRDA_DEBUG(1, "%s(), *** Change To RX mode: FIR_LCR_B = 0x%x *** \n", __func__ , inb(iobase+FIR_LCR_B));
 			
 	/* Set Rx Threshold */
 	switch_bank(iobase, BANK1);
@@ -1768,7 +1768,7 @@ static int ali_ircc_dma_receive(struct ali_ircc_cb *self)
 	outb(CR_DMA_EN | CR_DMA_BURST, iobase+FIR_CR);
 				
 	switch_bank(iobase, BANK0); 
-	IRDA_DEBUG(1, "%s(), ----------------- End ------------------\n", __FUNCTION__ );	
+	IRDA_DEBUG(1, "%s(), ----------------- End ------------------\n", __func__ );
 	return 0;
 }
 
@@ -1779,7 +1779,7 @@ static int  ali_ircc_dma_receive_complete(struct ali_ircc_cb *self)
 	__u8 status, MessageCount;
 	int len, i, iobase, val;	
 
-	IRDA_DEBUG(1, "%s(), ---------------- Start -----------------\n", __FUNCTION__ );	
+	IRDA_DEBUG(1, "%s(), ---------------- Start -----------------\n", __func__ );
 
 	st_fifo = &self->st_fifo;		
 	iobase = self->io.fir_base;	
@@ -1788,7 +1788,7 @@ static int  ali_ircc_dma_receive_complete(struct ali_ircc_cb *self)
 	MessageCount = inb(iobase+ FIR_LSR)&0x07;
 	
 	if (MessageCount > 0)	
-		IRDA_DEBUG(0, "%s(), Messsage count = %d,\n", __FUNCTION__ , MessageCount);	
+		IRDA_DEBUG(0, "%s(), Messsage count = %d,\n", __func__ , MessageCount);
 		
 	for (i=0; i<=MessageCount; i++)
 	{
@@ -1801,11 +1801,11 @@ static int  ali_ircc_dma_receive_complete(struct ali_ircc_cb *self)
 		len = len << 8; 
 		len |= inb(iobase+FIR_RX_DSR_LO);
 		
-		IRDA_DEBUG(1, "%s(), RX Length = 0x%.2x,\n", __FUNCTION__ , len);	
-		IRDA_DEBUG(1, "%s(), RX Status = 0x%.2x,\n", __FUNCTION__ , status);
+		IRDA_DEBUG(1, "%s(), RX Length = 0x%.2x,\n", __func__ , len);
+		IRDA_DEBUG(1, "%s(), RX Status = 0x%.2x,\n", __func__ , status);
 		
 		if (st_fifo->tail >= MAX_RX_WINDOW) {
-			IRDA_DEBUG(0, "%s(), window is full!\n", __FUNCTION__ );
+			IRDA_DEBUG(0, "%s(), window is full!\n", __func__ );
 			continue;
 		}
 			
@@ -1828,7 +1828,7 @@ static int  ali_ircc_dma_receive_complete(struct ali_ircc_cb *self)
 		/* Check for errors */
 		if ((status & 0xd8) || self->rcvFramesOverflow || (len==0)) 		
 		{
-			IRDA_DEBUG(0,"%s(), ************* RX Errors ************ \n", __FUNCTION__ );	
+			IRDA_DEBUG(0,"%s(), ************* RX Errors ************ \n", __func__ );
 			
 			/* Skip frame */
 			self->stats.rx_errors++;
@@ -1838,29 +1838,29 @@ static int  ali_ircc_dma_receive_complete(struct ali_ircc_cb *self)
 			if (status & LSR_FIFO_UR) 
 			{
 				self->stats.rx_frame_errors++;
-				IRDA_DEBUG(0,"%s(), ************* FIFO Errors ************ \n", __FUNCTION__ );
+				IRDA_DEBUG(0,"%s(), ************* FIFO Errors ************ \n", __func__ );
 			}	
 			if (status & LSR_FRAME_ERROR)
 			{
 				self->stats.rx_frame_errors++;
-				IRDA_DEBUG(0,"%s(), ************* FRAME Errors ************ \n", __FUNCTION__ );
+				IRDA_DEBUG(0,"%s(), ************* FRAME Errors ************ \n", __func__ );
 			}
 							
 			if (status & LSR_CRC_ERROR) 
 			{
 				self->stats.rx_crc_errors++;
-				IRDA_DEBUG(0,"%s(), ************* CRC Errors ************ \n", __FUNCTION__ );
+				IRDA_DEBUG(0,"%s(), ************* CRC Errors ************ \n", __func__ );
 			}
 			
 			if(self->rcvFramesOverflow)
 			{
 				self->stats.rx_frame_errors++;
-				IRDA_DEBUG(0,"%s(), ************* Overran DMA buffer ************ \n", __FUNCTION__ );								
+				IRDA_DEBUG(0,"%s(), ************* Overran DMA buffer ************ \n", __func__ );
 			}
 			if(len == 0)
 			{
 				self->stats.rx_frame_errors++;
-				IRDA_DEBUG(0,"%s(), ********** Receive Frame Size = 0 ********* \n", __FUNCTION__ );
+				IRDA_DEBUG(0,"%s(), ********** Receive Frame Size = 0 ********* \n", __func__ );
 			}
 		}	 
 		else 
@@ -1872,7 +1872,7 @@ static int  ali_ircc_dma_receive_complete(struct ali_ircc_cb *self)
 				val = inb(iobase+FIR_BSR);	
 				if ((val& BSR_FIFO_NOT_EMPTY)== 0x80) 
 				{
-					IRDA_DEBUG(0, "%s(), ************* BSR_FIFO_NOT_EMPTY ************ \n", __FUNCTION__ );
+					IRDA_DEBUG(0, "%s(), ************* BSR_FIFO_NOT_EMPTY ************ \n", __func__ );
 					
 					/* Put this entry back in fifo */
 					st_fifo->head--;
@@ -1909,7 +1909,7 @@ static int  ali_ircc_dma_receive_complete(struct ali_ircc_cb *self)
 			{
 				IRDA_WARNING("%s(), memory squeeze, "
 					     "dropping frame.\n",
-					     __FUNCTION__);
+					     __func__);
 				self->stats.rx_dropped++;
 
 				return FALSE;
@@ -1937,7 +1937,7 @@ static int  ali_ircc_dma_receive_complete(struct ali_ircc_cb *self)
 	
 	switch_bank(iobase, BANK0);	
 		
-	IRDA_DEBUG(1, "%s(), ----------------- End ------------------\n", __FUNCTION__ );	
+	IRDA_DEBUG(1, "%s(), ----------------- End ------------------\n", __func__ );
 	return TRUE;
 }
 
@@ -1956,7 +1956,7 @@ static int ali_ircc_sir_hard_xmit(struct sk_buff *skb, struct net_device *dev)
 	int iobase;
 	__u32 speed;
 	
-	IRDA_DEBUG(2, "%s(), ---------------- Start ----------------\n", __FUNCTION__ );
+	IRDA_DEBUG(2, "%s(), ---------------- Start ----------------\n", __func__ );
 	
 	IRDA_ASSERT(dev != NULL, return 0;);
 	
@@ -2005,7 +2005,7 @@ static int ali_ircc_sir_hard_xmit(struct sk_buff *skb, struct net_device *dev)
 
 	dev_kfree_skb(skb);
 	
-	IRDA_DEBUG(2, "%s(), ----------------- End ------------------\n", __FUNCTION__ );	
+	IRDA_DEBUG(2, "%s(), ----------------- End ------------------\n", __func__ );
 	
 	return 0;	
 }
@@ -2024,7 +2024,7 @@ static int ali_ircc_net_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
 	unsigned long flags;
 	int ret = 0;
 	
-	IRDA_DEBUG(2, "%s(), ---------------- Start ----------------\n", __FUNCTION__ );
+	IRDA_DEBUG(2, "%s(), ---------------- Start ----------------\n", __func__ );
 	
 	IRDA_ASSERT(dev != NULL, return -1;);
 
@@ -2032,11 +2032,11 @@ static int ali_ircc_net_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
 
 	IRDA_ASSERT(self != NULL, return -1;);
 
-	IRDA_DEBUG(2, "%s(), %s, (cmd=0x%X)\n", __FUNCTION__ , dev->name, cmd);
+	IRDA_DEBUG(2, "%s(), %s, (cmd=0x%X)\n", __func__ , dev->name, cmd);
 	
 	switch (cmd) {
 	case SIOCSBANDWIDTH: /* Set bandwidth */
-		IRDA_DEBUG(1, "%s(), SIOCSBANDWIDTH\n", __FUNCTION__ );
+		IRDA_DEBUG(1, "%s(), SIOCSBANDWIDTH\n", __func__ );
 		/*
 		 * This function will also be used by IrLAP to change the
 		 * speed, so we still must allow for speed change within
@@ -2050,13 +2050,13 @@ static int ali_ircc_net_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
 		spin_unlock_irqrestore(&self->lock, flags);
 		break;
 	case SIOCSMEDIABUSY: /* Set media busy */
-		IRDA_DEBUG(1, "%s(), SIOCSMEDIABUSY\n", __FUNCTION__ );
+		IRDA_DEBUG(1, "%s(), SIOCSMEDIABUSY\n", __func__ );
 		if (!capable(CAP_NET_ADMIN))
 			return -EPERM;
 		irda_device_set_media_busy(self->netdev, TRUE);
 		break;
 	case SIOCGRECEIVING: /* Check if we are receiving right now */
-		IRDA_DEBUG(2, "%s(), SIOCGRECEIVING\n", __FUNCTION__ );
+		IRDA_DEBUG(2, "%s(), SIOCGRECEIVING\n", __func__ );
 		/* This is protected */
 		irq->ifr_receiving = ali_ircc_is_receiving(self);
 		break;
@@ -2064,7 +2064,7 @@ static int ali_ircc_net_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
 		ret = -EOPNOTSUPP;
 	}
 	
-	IRDA_DEBUG(2, "%s(), ----------------- End ------------------\n", __FUNCTION__ );	
+	IRDA_DEBUG(2, "%s(), ----------------- End ------------------\n", __func__ );
 	
 	return ret;
 }
@@ -2081,7 +2081,7 @@ static int ali_ircc_is_receiving(struct ali_ircc_cb *self)
 	int status = FALSE;
 	int iobase;		
 	
-	IRDA_DEBUG(2, "%s(), ---------------- Start -----------------\n", __FUNCTION__ );
+	IRDA_DEBUG(2, "%s(), ---------------- Start -----------------\n", __func__ );
 	
 	IRDA_ASSERT(self != NULL, return FALSE;);
 
@@ -2095,7 +2095,7 @@ static int ali_ircc_is_receiving(struct ali_ircc_cb *self)
 		if((inb(iobase+FIR_FIFO_FR) & 0x3f) != 0) 		
 		{
 			/* We are receiving something */
-			IRDA_DEBUG(1, "%s(), We are receiving something\n", __FUNCTION__ );
+			IRDA_DEBUG(1, "%s(), We are receiving something\n", __func__ );
 			status = TRUE;
 		}
 		switch_bank(iobase, BANK0);		
@@ -2107,7 +2107,7 @@ static int ali_ircc_is_receiving(struct ali_ircc_cb *self)
 	
 	spin_unlock_irqrestore(&self->lock, flags);
 	
-	IRDA_DEBUG(2, "%s(), ----------------- End ------------------\n", __FUNCTION__ );
+	IRDA_DEBUG(2, "%s(), ----------------- End ------------------\n", __func__ );
 	
 	return status;
 }
@@ -2116,9 +2116,9 @@ static struct net_device_stats *ali_ircc_net_get_stats(struct net_device *dev)
 {
 	struct ali_ircc_cb *self = (struct ali_ircc_cb *) dev->priv;
 	
-	IRDA_DEBUG(2, "%s(), ---------------- Start ----------------\n", __FUNCTION__ );
+	IRDA_DEBUG(2, "%s(), ---------------- Start ----------------\n", __func__ );
 		
-	IRDA_DEBUG(2, "%s(), ----------------- End ------------------\n", __FUNCTION__ );	
+	IRDA_DEBUG(2, "%s(), ----------------- End ------------------\n", __func__ );
 	
 	return &self->stats;
 }
@@ -2164,7 +2164,7 @@ static void SetCOMInterrupts(struct ali_ircc_cb *self , unsigned char enable)
 	
 	int iobase = self->io.fir_base; /* or sir_base */
 
-	IRDA_DEBUG(2, "%s(), -------- Start -------- ( Enable = %d )\n", __FUNCTION__ , enable);	
+	IRDA_DEBUG(2, "%s(), -------- Start -------- ( Enable = %d )\n", __func__ , enable);
 	
 	/* Enable the interrupt which we wish to */
 	if (enable){
@@ -2205,14 +2205,14 @@ static void SetCOMInterrupts(struct ali_ircc_cb *self , unsigned char enable)
 	else
 		outb(newMask, iobase+UART_IER);
 		
-	IRDA_DEBUG(2, "%s(), ----------------- End ------------------\n", __FUNCTION__ );	
+	IRDA_DEBUG(2, "%s(), ----------------- End ------------------\n", __func__ );
 }
 
 static void SIR2FIR(int iobase)
 {
 	//unsigned char tmp;
 		
-	IRDA_DEBUG(1, "%s(), ---------------- Start ----------------\n", __FUNCTION__ );
+	IRDA_DEBUG(1, "%s(), ---------------- Start ----------------\n", __func__ );
 	
 	/* Already protected (change_speed() or setup()), no need to lock.
 	 * Jean II */
@@ -2228,14 +2228,14 @@ static void SIR2FIR(int iobase)
 	//tmp |= 0x20;
 	//outb(tmp, iobase+FIR_LCR_B);	
 	
-	IRDA_DEBUG(1, "%s(), ----------------- End ------------------\n", __FUNCTION__ );	
+	IRDA_DEBUG(1, "%s(), ----------------- End ------------------\n", __func__ );
 }
 
 static void FIR2SIR(int iobase)
 {
 	unsigned char val;
 	
-	IRDA_DEBUG(1, "%s(), ---------------- Start ----------------\n", __FUNCTION__ );
+	IRDA_DEBUG(1, "%s(), ---------------- Start ----------------\n", __func__ );
 	
 	/* Already protected (change_speed() or setup()), no need to lock.
 	 * Jean II */
@@ -2251,7 +2251,7 @@ static void FIR2SIR(int iobase)
 	val = inb(iobase+UART_LSR);
 	val = inb(iobase+UART_MSR);
 	
-	IRDA_DEBUG(1, "%s(), ----------------- End ------------------\n", __FUNCTION__ );
+	IRDA_DEBUG(1, "%s(), ----------------- End ------------------\n", __func__ );
 }
 
 MODULE_AUTHOR("Benjamin Kong <benjamin_kong@ali.com.tw>");
diff --git a/drivers/net/irda/donauboe.c b/drivers/net/irda/donauboe.c
index 34ad189fff67..69d16b30323b 100644
--- a/drivers/net/irda/donauboe.c
+++ b/drivers/net/irda/donauboe.c
@@ -245,7 +245,7 @@ toshoboe_dumpregs (struct toshoboe_cb *self)
 {
   __u32 ringbase;
 
-  IRDA_DEBUG (4, "%s()\n", __FUNCTION__);
+  IRDA_DEBUG (4, "%s()\n", __func__);
 
   ringbase = INB (OBOE_RING_BASE0) << 10;
   ringbase |= INB (OBOE_RING_BASE1) << 18;
@@ -293,7 +293,7 @@ static void
 toshoboe_disablebm (struct toshoboe_cb *self)
 {
   __u8 command;
-  IRDA_DEBUG (4, "%s()\n", __FUNCTION__);
+  IRDA_DEBUG (4, "%s()\n", __func__);
 
   pci_read_config_byte (self->pdev, PCI_COMMAND, &command);
   command &= ~PCI_COMMAND_MASTER;
@@ -305,7 +305,7 @@ toshoboe_disablebm (struct toshoboe_cb *self)
 static void
 toshoboe_stopchip (struct toshoboe_cb *self)
 {
-  IRDA_DEBUG (4, "%s()\n", __FUNCTION__);
+  IRDA_DEBUG (4, "%s()\n", __func__);
 
   /*Disable interrupts */
   OUTB (0x0, OBOE_IER);
@@ -350,7 +350,7 @@ toshoboe_setbaud (struct toshoboe_cb *self)
   __u16 pconfig = 0;
   __u8 config0l = 0;
 
-  IRDA_DEBUG (2, "%s(%d/%d)\n", __FUNCTION__, self->speed, self->io.speed);
+  IRDA_DEBUG (2, "%s(%d/%d)\n", __func__, self->speed, self->io.speed);
 
   switch (self->speed)
     {
@@ -482,7 +482,7 @@ toshoboe_setbaud (struct toshoboe_cb *self)
 static void
 toshoboe_enablebm (struct toshoboe_cb *self)
 {
-  IRDA_DEBUG (4, "%s()\n", __FUNCTION__);
+  IRDA_DEBUG (4, "%s()\n", __func__);
   pci_set_master (self->pdev);
 }
 
@@ -492,7 +492,7 @@ toshoboe_initring (struct toshoboe_cb *self)
 {
   int i;
 
-  IRDA_DEBUG (4, "%s()\n", __FUNCTION__);
+  IRDA_DEBUG (4, "%s()\n", __func__);
 
   for (i = 0; i < TX_SLOTS; ++i)
     {
@@ -550,7 +550,7 @@ toshoboe_startchip (struct toshoboe_cb *self)
 {
   __u32 physaddr;
 
-  IRDA_DEBUG (4, "%s()\n", __FUNCTION__);
+  IRDA_DEBUG (4, "%s()\n", __func__);
 
   toshoboe_initring (self);
   toshoboe_enablebm (self);
@@ -824,7 +824,7 @@ toshoboe_probe (struct toshoboe_cb *self)
 #endif
   unsigned long flags;
 
-  IRDA_DEBUG (4, "%s()\n", __FUNCTION__);
+  IRDA_DEBUG (4, "%s()\n", __func__);
 
   if (request_irq (self->io.irq, toshoboe_probeinterrupt,
                    self->io.irqflags, "toshoboe", (void *) self))
@@ -983,10 +983,10 @@ toshoboe_hard_xmit (struct sk_buff *skb, struct net_device *dev)
 
   IRDA_ASSERT (self != NULL, return 0; );
 
-  IRDA_DEBUG (1, "%s.tx:%x(%x)%x\n", __FUNCTION__
+  IRDA_DEBUG (1, "%s.tx:%x(%x)%x\n", __func__
       ,skb->len,self->txpending,INB (OBOE_ENABLEH));
   if (!cb->magic) {
-      IRDA_DEBUG (2, "%s.Not IrLAP:%x\n", __FUNCTION__, cb->magic);
+      IRDA_DEBUG (2, "%s.Not IrLAP:%x\n", __func__, cb->magic);
 #ifdef DUMP_PACKETS
       _dumpbufs(skb->data,skb->len,'>');
 #endif
@@ -1015,7 +1015,7 @@ toshoboe_hard_xmit (struct sk_buff *skb, struct net_device *dev)
         {
           self->new_speed = speed;
           IRDA_DEBUG (1, "%s: Queued TxDone scheduled speed change %d\n" ,
-		      __FUNCTION__, speed);
+		      __func__, speed);
           /* if no data, that's all! */
           if (!skb->len)
             {
@@ -1057,7 +1057,7 @@ toshoboe_hard_xmit (struct sk_buff *skb, struct net_device *dev)
       /* which we will add a wrong checksum to */
 
       mtt = toshoboe_makemttpacket (self, self->tx_bufs[self->txs], mtt);
-      IRDA_DEBUG (1, "%s.mtt:%x(%x)%d\n", __FUNCTION__
+      IRDA_DEBUG (1, "%s.mtt:%x(%x)%d\n", __func__
           ,skb->len,mtt,self->txpending);
       if (mtt)
         {
@@ -1101,7 +1101,7 @@ dumpbufs(skb->data,skb->len,'>');
 
   if (self->ring->tx[self->txs].control & OBOE_CTL_TX_HW_OWNS)
     {
-      IRDA_DEBUG (0, "%s.ful:%x(%x)%x\n", __FUNCTION__
+      IRDA_DEBUG (0, "%s.ful:%x(%x)%x\n", __func__
           ,skb->len, self->ring->tx[self->txs].control, self->txpending);
       toshoboe_start_DMA(self, OBOE_CONFIG0H_ENTX);
       spin_unlock_irqrestore(&self->spinlock, flags);
@@ -1179,7 +1179,7 @@ toshoboe_interrupt (int irq, void *dev_id)
           if (self->ring->tx[i].control & OBOE_CTL_TX_HW_OWNS)
               self->txpending++;
         }
-      IRDA_DEBUG (1, "%s.txd(%x)%x/%x\n", __FUNCTION__
+      IRDA_DEBUG (1, "%s.txd(%x)%x/%x\n", __func__
           ,irqstat,txp,self->txpending);
 
       txp = INB (OBOE_TXSLOT) & OBOE_SLOT_MASK;
@@ -1209,7 +1209,7 @@ toshoboe_interrupt (int irq, void *dev_id)
         {
           self->speed = self->new_speed;
           IRDA_DEBUG (1, "%s: Executed TxDone scheduled speed change %d\n",
-		      __FUNCTION__, self->speed);
+		      __func__, self->speed);
           toshoboe_setbaud (self);
         }
 
@@ -1224,7 +1224,7 @@ toshoboe_interrupt (int irq, void *dev_id)
         {
           int len = self->ring->rx[self->rxs].len;
           skb = NULL;
-          IRDA_DEBUG (3, "%s.rcv:%x(%x)\n", __FUNCTION__
+          IRDA_DEBUG (3, "%s.rcv:%x(%x)\n", __func__
 		      ,len,self->ring->rx[self->rxs].control);
 
 #ifdef DUMP_PACKETS
@@ -1246,7 +1246,7 @@ dumpbufs(self->rx_bufs[self->rxs],len,'<');
                       len -= 2;
                   else
                       len = 0;
-                  IRDA_DEBUG (1, "%s.SIR:%x(%x)\n", __FUNCTION__, len,enable);
+                  IRDA_DEBUG (1, "%s.SIR:%x(%x)\n", __func__, len,enable);
                 }
 
 #ifdef USE_MIR
@@ -1256,7 +1256,7 @@ dumpbufs(self->rx_bufs[self->rxs],len,'<');
                       len -= 2;
                   else
                       len = 0;
-                  IRDA_DEBUG (2, "%s.MIR:%x(%x)\n", __FUNCTION__, len,enable);
+                  IRDA_DEBUG (2, "%s.MIR:%x(%x)\n", __func__, len,enable);
                 }
 #endif
               else if (enable & OBOE_ENABLEH_FIRON)
@@ -1265,10 +1265,10 @@ dumpbufs(self->rx_bufs[self->rxs],len,'<');
                       len -= 4;   /*FIXME: check this */
                   else
                       len = 0;
-                  IRDA_DEBUG (1, "%s.FIR:%x(%x)\n", __FUNCTION__, len,enable);
+                  IRDA_DEBUG (1, "%s.FIR:%x(%x)\n", __func__, len,enable);
                 }
               else
-                  IRDA_DEBUG (0, "%s.?IR:%x(%x)\n", __FUNCTION__, len,enable);
+                  IRDA_DEBUG (0, "%s.?IR:%x(%x)\n", __func__, len,enable);
 
               if (len)
                 {
@@ -1289,7 +1289,7 @@ dumpbufs(self->rx_bufs[self->rxs],len,'<');
                     {
                       printk (KERN_INFO
                               "%s(), memory squeeze, dropping frame.\n",
-			      __FUNCTION__);
+			      __func__);
                     }
                 }
             }
@@ -1301,7 +1301,7 @@ dumpbufs(self->rx_bufs[self->rxs],len,'<');
             /* (SIR) data is splitted in several slots. */
             /* we have to join all the received buffers received */
             /*in a large buffer before checking CRC. */
-            IRDA_DEBUG (0, "%s.err:%x(%x)\n", __FUNCTION__
+            IRDA_DEBUG (0, "%s.err:%x(%x)\n", __func__
                 ,len,self->ring->rx[self->rxs].control);
             }
 
@@ -1329,7 +1329,7 @@ dumpbufs(self->rx_bufs[self->rxs],len,'<');
   if (irqstat & OBOE_INT_SIP)
     {
       self->int_sip++;
-      IRDA_DEBUG (1, "%s.sip:%x(%x)%x\n", __FUNCTION__
+      IRDA_DEBUG (1, "%s.sip:%x(%x)%x\n", __func__
 	      ,self->int_sip,irqstat,self->txpending);
     }
   return IRQ_HANDLED;
@@ -1343,7 +1343,7 @@ toshoboe_net_open (struct net_device *dev)
   unsigned long flags;
   int rc;
 
-  IRDA_DEBUG (4, "%s()\n", __FUNCTION__);
+  IRDA_DEBUG (4, "%s()\n", __func__);
 
   self = netdev_priv(dev);
 
@@ -1381,7 +1381,7 @@ toshoboe_net_close (struct net_device *dev)
 {
   struct toshoboe_cb *self;
 
-  IRDA_DEBUG (4, "%s()\n", __FUNCTION__);
+  IRDA_DEBUG (4, "%s()\n", __func__);
 
   IRDA_ASSERT (dev != NULL, return -1; );
   self = (struct toshoboe_cb *) dev->priv;
@@ -1426,7 +1426,7 @@ toshoboe_net_ioctl (struct net_device *dev, struct ifreq *rq, int cmd)
 
   IRDA_ASSERT (self != NULL, return -1; );
 
-  IRDA_DEBUG (5, "%s(), %s, (cmd=0x%X)\n", __FUNCTION__, dev->name, cmd);
+  IRDA_DEBUG (5, "%s(), %s, (cmd=0x%X)\n", __func__, dev->name, cmd);
 
   /* Disable interrupts & save flags */
   spin_lock_irqsave(&self->spinlock, flags);
@@ -1438,7 +1438,7 @@ toshoboe_net_ioctl (struct net_device *dev, struct ifreq *rq, int cmd)
        * speed, so we still must allow for speed change within
        * interrupt context.
        */
-      IRDA_DEBUG (1, "%s(BANDWIDTH), %s, (%X/%ld\n", __FUNCTION__
+      IRDA_DEBUG (1, "%s(BANDWIDTH), %s, (%X/%ld\n", __func__
           ,dev->name, INB (OBOE_STATUS), irq->ifr_baudrate );
       if (!in_interrupt () && !capable (CAP_NET_ADMIN)) {
 	ret = -EPERM;
@@ -1451,7 +1451,7 @@ toshoboe_net_ioctl (struct net_device *dev, struct ifreq *rq, int cmd)
       self->new_speed = irq->ifr_baudrate;
       break;
     case SIOCSMEDIABUSY:       /* Set media busy */
-      IRDA_DEBUG (1, "%s(MEDIABUSY), %s, (%X/%x)\n", __FUNCTION__
+      IRDA_DEBUG (1, "%s(MEDIABUSY), %s, (%X/%x)\n", __func__
           ,dev->name, INB (OBOE_STATUS), capable (CAP_NET_ADMIN) );
       if (!capable (CAP_NET_ADMIN)) {
 	ret = -EPERM;
@@ -1461,11 +1461,11 @@ toshoboe_net_ioctl (struct net_device *dev, struct ifreq *rq, int cmd)
       break;
     case SIOCGRECEIVING:       /* Check if we are receiving right now */
       irq->ifr_receiving = (INB (OBOE_STATUS) & OBOE_STATUS_RXBUSY) ? 1 : 0;
-      IRDA_DEBUG (3, "%s(RECEIVING), %s, (%X/%x)\n", __FUNCTION__
+      IRDA_DEBUG (3, "%s(RECEIVING), %s, (%X/%x)\n", __func__
           ,dev->name, INB (OBOE_STATUS), irq->ifr_receiving );
       break;
     default:
-      IRDA_DEBUG (1, "%s(?), %s, (cmd=0x%X)\n", __FUNCTION__, dev->name, cmd);
+      IRDA_DEBUG (1, "%s(?), %s, (cmd=0x%X)\n", __func__, dev->name, cmd);
       ret = -EOPNOTSUPP;
     }
 out:
@@ -1492,7 +1492,7 @@ toshoboe_close (struct pci_dev *pci_dev)
   int i;
   struct toshoboe_cb *self = (struct toshoboe_cb*)pci_get_drvdata(pci_dev);
 
-  IRDA_DEBUG (4, "%s()\n", __FUNCTION__);
+  IRDA_DEBUG (4, "%s()\n", __func__);
 
   IRDA_ASSERT (self != NULL, return; );
 
@@ -1533,7 +1533,7 @@ toshoboe_open (struct pci_dev *pci_dev, const struct pci_device_id *pdid)
   int ok = 0;
   int err;
 
-  IRDA_DEBUG (4, "%s()\n", __FUNCTION__);
+  IRDA_DEBUG (4, "%s()\n", __func__);
 
   if ((err=pci_enable_device(pci_dev)))
     return err;
@@ -1700,7 +1700,7 @@ toshoboe_gotosleep (struct pci_dev *pci_dev, pm_message_t crap)
   unsigned long flags;
   int i = 10;
 
-  IRDA_DEBUG (4, "%s()\n", __FUNCTION__);
+  IRDA_DEBUG (4, "%s()\n", __func__);
 
   if (!self || self->stopped)
     return 0;
@@ -1728,7 +1728,7 @@ toshoboe_wakeup (struct pci_dev *pci_dev)
   struct toshoboe_cb *self = (struct toshoboe_cb*)pci_get_drvdata(pci_dev);
   unsigned long flags;
 
-  IRDA_DEBUG (4, "%s()\n", __FUNCTION__);
+  IRDA_DEBUG (4, "%s()\n", __func__);
 
   if (!self || !self->stopped)
     return 0;
diff --git a/drivers/net/irda/ep7211-sir.c b/drivers/net/irda/ep7211-sir.c
index 831572429bb9..f83c5b881d2d 100644
--- a/drivers/net/irda/ep7211-sir.c
+++ b/drivers/net/irda/ep7211-sir.c
@@ -14,7 +14,7 @@
 #include <net/irda/irda_device.h>
 
 #include <asm/io.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 
 #include "sir-dev.h"
 
diff --git a/drivers/net/irda/girbil-sir.c b/drivers/net/irda/girbil-sir.c
index 738531b16bd3..a31b8fa8aaa9 100644
--- a/drivers/net/irda/girbil-sir.c
+++ b/drivers/net/irda/girbil-sir.c
@@ -86,7 +86,7 @@ static int girbil_open(struct sir_dev *dev)
 {
 	struct qos_info *qos = &dev->qos;
 
-	IRDA_DEBUG(2, "%s()\n", __FUNCTION__);
+	IRDA_DEBUG(2, "%s()\n", __func__);
 
 	/* Power on dongle */
 	sirdev_set_dtr_rts(dev, TRUE, TRUE);
@@ -102,7 +102,7 @@ static int girbil_open(struct sir_dev *dev)
 
 static int girbil_close(struct sir_dev *dev)
 {
-	IRDA_DEBUG(2, "%s()\n", __FUNCTION__);
+	IRDA_DEBUG(2, "%s()\n", __func__);
 
 	/* Power off dongle */
 	sirdev_set_dtr_rts(dev, FALSE, FALSE);
@@ -126,7 +126,7 @@ static int girbil_change_speed(struct sir_dev *dev, unsigned speed)
 	u8 control[2];
 	static int ret = 0;
 
-	IRDA_DEBUG(2, "%s()\n", __FUNCTION__);
+	IRDA_DEBUG(2, "%s()\n", __func__);
 
 	/* dongle alread reset - port and dongle at default speed */
 
@@ -179,7 +179,7 @@ static int girbil_change_speed(struct sir_dev *dev, unsigned speed)
 		break;
 
 	default:
-		IRDA_ERROR("%s - undefined state %d\n", __FUNCTION__, state);
+		IRDA_ERROR("%s - undefined state %d\n", __func__, state);
 		ret = -EINVAL;
 		break;
 	}
@@ -209,7 +209,7 @@ static int girbil_reset(struct sir_dev *dev)
 	u8 control = GIRBIL_TXEN | GIRBIL_RXEN;
 	int ret = 0;
 
-	IRDA_DEBUG(2, "%s()\n", __FUNCTION__);
+	IRDA_DEBUG(2, "%s()\n", __func__);
 
 	switch (state) {
 	case SIRDEV_STATE_DONGLE_RESET:
@@ -241,7 +241,7 @@ static int girbil_reset(struct sir_dev *dev)
 		break;
 
 	default:
-		IRDA_ERROR("%s(), undefined state %d\n", __FUNCTION__, state);
+		IRDA_ERROR("%s(), undefined state %d\n", __func__, state);
 		ret = -1;
 		break;
 	}
diff --git a/drivers/net/irda/irda-usb.c b/drivers/net/irda/irda-usb.c
index 18b471cd1447..b5d6b9ac162a 100644
--- a/drivers/net/irda/irda-usb.c
+++ b/drivers/net/irda/irda-usb.c
@@ -177,12 +177,12 @@ static void irda_usb_build_header(struct irda_usb_cb *self,
 		    (!force) && (self->speed != -1)) {
 			/* No speed and xbofs change here
 			 * (we'll do it later in the write callback) */
-			IRDA_DEBUG(2, "%s(), not changing speed yet\n", __FUNCTION__);
+			IRDA_DEBUG(2, "%s(), not changing speed yet\n", __func__);
 			*header = 0;
 			return;
 		}
 
-		IRDA_DEBUG(2, "%s(), changing speed to %d\n", __FUNCTION__, self->new_speed);
+		IRDA_DEBUG(2, "%s(), changing speed to %d\n", __func__, self->new_speed);
 		self->speed = self->new_speed;
 		/* We will do ` self->new_speed = -1; ' in the completion
 		 * handler just in case the current URB fail - Jean II */
@@ -228,7 +228,7 @@ static void irda_usb_build_header(struct irda_usb_cb *self,
 	
 	/* Set the negotiated additional XBOFS */
 	if (self->new_xbofs != -1) {
-		IRDA_DEBUG(2, "%s(), changing xbofs to %d\n", __FUNCTION__, self->new_xbofs);
+		IRDA_DEBUG(2, "%s(), changing xbofs to %d\n", __func__, self->new_xbofs);
 		self->xbofs = self->new_xbofs;
 		/* We will do ` self->new_xbofs = -1; ' in the completion
 		 * handler just in case the current URB fail - Jean II */
@@ -302,13 +302,13 @@ static void irda_usb_change_speed_xbofs(struct irda_usb_cb *self)
 	struct urb *urb;
 	int ret;
 
-	IRDA_DEBUG(2, "%s(), speed=%d, xbofs=%d\n", __FUNCTION__,
+	IRDA_DEBUG(2, "%s(), speed=%d, xbofs=%d\n", __func__,
 		   self->new_speed, self->new_xbofs);
 
 	/* Grab the speed URB */
 	urb = self->speed_urb;
 	if (urb->status != 0) {
-		IRDA_WARNING("%s(), URB still in use!\n", __FUNCTION__);
+		IRDA_WARNING("%s(), URB still in use!\n", __func__);
 		return;
 	}
 
@@ -334,7 +334,7 @@ static void irda_usb_change_speed_xbofs(struct irda_usb_cb *self)
 
 	/* Irq disabled -> GFP_ATOMIC */
 	if ((ret = usb_submit_urb(urb, GFP_ATOMIC))) {
-		IRDA_WARNING("%s(), failed Speed URB\n", __FUNCTION__);
+		IRDA_WARNING("%s(), failed Speed URB\n", __func__);
 	}
 }
 
@@ -347,7 +347,7 @@ static void speed_bulk_callback(struct urb *urb)
 {
 	struct irda_usb_cb *self = urb->context;
 	
-	IRDA_DEBUG(2, "%s()\n", __FUNCTION__);
+	IRDA_DEBUG(2, "%s()\n", __func__);
 
 	/* We should always have a context */
 	IRDA_ASSERT(self != NULL, return;);
@@ -357,7 +357,7 @@ static void speed_bulk_callback(struct urb *urb)
 	/* Check for timeout and other USB nasties */
 	if (urb->status != 0) {
 		/* I get a lot of -ECONNABORTED = -103 here - Jean II */
-		IRDA_DEBUG(0, "%s(), URB complete status %d, transfer_flags 0x%04X\n", __FUNCTION__, urb->status, urb->transfer_flags);
+		IRDA_DEBUG(0, "%s(), URB complete status %d, transfer_flags 0x%04X\n", __func__, urb->status, urb->transfer_flags);
 
 		/* Don't do anything here, that might confuse the USB layer.
 		 * Instead, we will wait for irda_usb_net_timeout(), the
@@ -392,7 +392,7 @@ static int irda_usb_hard_xmit(struct sk_buff *skb, struct net_device *netdev)
 	int res, mtt;
 	int	err = 1;	/* Failed */
 
-	IRDA_DEBUG(4, "%s() on %s\n", __FUNCTION__, netdev->name);
+	IRDA_DEBUG(4, "%s() on %s\n", __func__, netdev->name);
 
 	netif_stop_queue(netdev);
 
@@ -403,7 +403,7 @@ static int irda_usb_hard_xmit(struct sk_buff *skb, struct net_device *netdev)
 	 * We need to check self->present under the spinlock because
 	 * of irda_usb_disconnect() is synchronous - Jean II */
 	if (!self->present) {
-		IRDA_DEBUG(0, "%s(), Device is gone...\n", __FUNCTION__);
+		IRDA_DEBUG(0, "%s(), Device is gone...\n", __func__);
 		goto drop;
 	}
 
@@ -437,7 +437,7 @@ static int irda_usb_hard_xmit(struct sk_buff *skb, struct net_device *netdev)
 	}
 
 	if (urb->status != 0) {
-		IRDA_WARNING("%s(), URB still in use!\n", __FUNCTION__);
+		IRDA_WARNING("%s(), URB still in use!\n", __func__);
 		goto drop;
 	}
 
@@ -524,7 +524,7 @@ static int irda_usb_hard_xmit(struct sk_buff *skb, struct net_device *netdev)
 	
 	/* Ask USB to send the packet - Irq disabled -> GFP_ATOMIC */
 	if ((res = usb_submit_urb(urb, GFP_ATOMIC))) {
-		IRDA_WARNING("%s(), failed Tx URB\n", __FUNCTION__);
+		IRDA_WARNING("%s(), failed Tx URB\n", __func__);
 		self->stats.tx_errors++;
 		/* Let USB recover : We will catch that in the watchdog */
 		/*netif_start_queue(netdev);*/
@@ -556,7 +556,7 @@ static void write_bulk_callback(struct urb *urb)
 	struct sk_buff *skb = urb->context;
 	struct irda_usb_cb *self = ((struct irda_skb_cb *) skb->cb)->context;
 	
-	IRDA_DEBUG(2, "%s()\n", __FUNCTION__);
+	IRDA_DEBUG(2, "%s()\n", __func__);
 
 	/* We should always have a context */
 	IRDA_ASSERT(self != NULL, return;);
@@ -570,7 +570,7 @@ static void write_bulk_callback(struct urb *urb)
 	/* Check for timeout and other USB nasties */
 	if (urb->status != 0) {
 		/* I get a lot of -ECONNABORTED = -103 here - Jean II */
-		IRDA_DEBUG(0, "%s(), URB complete status %d, transfer_flags 0x%04X\n", __FUNCTION__, urb->status, urb->transfer_flags);
+		IRDA_DEBUG(0, "%s(), URB complete status %d, transfer_flags 0x%04X\n", __func__, urb->status, urb->transfer_flags);
 
 		/* Don't do anything here, that might confuse the USB layer,
 		 * and we could go in recursion and blow the kernel stack...
@@ -589,7 +589,7 @@ static void write_bulk_callback(struct urb *urb)
 
 	/* If the network is closed, stop everything */
 	if ((!self->netopen) || (!self->present)) {
-		IRDA_DEBUG(0, "%s(), Network is gone...\n", __FUNCTION__);
+		IRDA_DEBUG(0, "%s(), Network is gone...\n", __func__);
 		spin_unlock_irqrestore(&self->lock, flags);
 		return;
 	}
@@ -600,7 +600,7 @@ static void write_bulk_callback(struct urb *urb)
 		    (self->new_xbofs != self->xbofs)) {
 			/* We haven't changed speed yet (because of
 			 * IUC_SPEED_BUG), so do it now - Jean II */
-			IRDA_DEBUG(1, "%s(), Changing speed now...\n", __FUNCTION__);
+			IRDA_DEBUG(1, "%s(), Changing speed now...\n", __func__);
 			irda_usb_change_speed_xbofs(self);
 		} else {
 			/* New speed and xbof is now commited in hardware */
@@ -632,7 +632,7 @@ static void irda_usb_net_timeout(struct net_device *netdev)
 	struct urb *urb;
 	int	done = 0;	/* If we have made any progress */
 
-	IRDA_DEBUG(0, "%s(), Network layer thinks we timed out!\n", __FUNCTION__);
+	IRDA_DEBUG(0, "%s(), Network layer thinks we timed out!\n", __func__);
 	IRDA_ASSERT(self != NULL, return;);
 
 	/* Protect us from USB callbacks, net Tx and else. */
@@ -640,7 +640,7 @@ static void irda_usb_net_timeout(struct net_device *netdev)
 
 	/* self->present *MUST* be read under spinlock */
 	if (!self->present) {
-		IRDA_WARNING("%s(), device not present!\n", __FUNCTION__);
+		IRDA_WARNING("%s(), device not present!\n", __func__);
 		netif_stop_queue(netdev);
 		spin_unlock_irqrestore(&self->lock, flags);
 		return;
@@ -763,7 +763,7 @@ static void irda_usb_submit(struct irda_usb_cb *self, struct sk_buff *skb, struc
 	struct irda_skb_cb *cb;
 	int ret;
 
-	IRDA_DEBUG(2, "%s()\n", __FUNCTION__);
+	IRDA_DEBUG(2, "%s()\n", __func__);
 
 	/* This should never happen */
 	IRDA_ASSERT(skb != NULL, return;);
@@ -786,7 +786,7 @@ static void irda_usb_submit(struct irda_usb_cb *self, struct sk_buff *skb, struc
 		/* If this ever happen, we are in deep s***.
 		 * Basically, the Rx path will stop... */
 		IRDA_WARNING("%s(), Failed to submit Rx URB %d\n",
-			     __FUNCTION__, ret);
+			     __func__, ret);
 	}
 }
 
@@ -807,7 +807,7 @@ static void irda_usb_receive(struct urb *urb)
 	struct urb *next_urb;
 	unsigned int len, docopy;
 
-	IRDA_DEBUG(2, "%s(), len=%d\n", __FUNCTION__, urb->actual_length);
+	IRDA_DEBUG(2, "%s(), len=%d\n", __func__, urb->actual_length);
 	
 	/* Find ourselves */
 	cb = (struct irda_skb_cb *) skb->cb;
@@ -817,7 +817,7 @@ static void irda_usb_receive(struct urb *urb)
 
 	/* If the network is closed or the device gone, stop everything */
 	if ((!self->netopen) || (!self->present)) {
-		IRDA_DEBUG(0, "%s(), Network is gone!\n", __FUNCTION__);
+		IRDA_DEBUG(0, "%s(), Network is gone!\n", __func__);
 		/* Don't re-submit the URB : will stall the Rx path */
 		return;
 	}
@@ -840,7 +840,7 @@ static void irda_usb_receive(struct urb *urb)
 			/* Usually precursor to a hot-unplug on OHCI. */
 		default:
 			self->stats.rx_errors++;
-			IRDA_DEBUG(0, "%s(), RX status %d, transfer_flags 0x%04X \n", __FUNCTION__, urb->status, urb->transfer_flags);
+			IRDA_DEBUG(0, "%s(), RX status %d, transfer_flags 0x%04X \n", __func__, urb->status, urb->transfer_flags);
 			break;
 		}
 		/* If we received an error, we don't want to resubmit the
@@ -861,7 +861,7 @@ static void irda_usb_receive(struct urb *urb)
 	
 	/* Check for empty frames */
 	if (urb->actual_length <= self->header_length) {
-		IRDA_WARNING("%s(), empty frame!\n", __FUNCTION__);
+		IRDA_WARNING("%s(), empty frame!\n", __func__);
 		goto done;
 	}
 
@@ -967,7 +967,7 @@ static void irda_usb_rx_defer_expired(unsigned long data)
 	struct irda_skb_cb *cb;
 	struct urb *next_urb;
 
-	IRDA_DEBUG(2, "%s()\n", __FUNCTION__);
+	IRDA_DEBUG(2, "%s()\n", __func__);
 
 	/* Find ourselves */
 	cb = (struct irda_skb_cb *) skb->cb;
@@ -1053,7 +1053,7 @@ static int stir421x_fw_upload(struct irda_usb_cb *self,
 				   patch_block, block_size,
 				   &actual_len, msecs_to_jiffies(500));
 		IRDA_DEBUG(3,"%s(): Bulk send %u bytes, ret=%d\n",
-			   __FUNCTION__, actual_len, ret);
+			   __func__, actual_len, ret);
 
 		if (ret < 0)
 			break;
@@ -1092,7 +1092,7 @@ static int stir421x_patch_device(struct irda_usb_cb *self)
 
         /* We get a patch from userspace */
         IRDA_MESSAGE("%s(): Received firmware %s (%zu bytes)\n",
-                     __FUNCTION__, stir421x_fw_name, fw->size);
+                     __func__, stir421x_fw_name, fw->size);
 
         ret = -EINVAL;
 
@@ -1116,7 +1116,7 @@ static int stir421x_patch_device(struct irda_usb_cb *self)
 				+ (build % 10);
 
 			IRDA_DEBUG(3, "%s(): Firmware Product version %ld\n",
-                                   __FUNCTION__, fw_version);
+                                   __func__, fw_version);
                 }
         }
 
@@ -1172,7 +1172,7 @@ static int irda_usb_net_open(struct net_device *netdev)
 	char	hwname[16];
 	int i;
 	
-	IRDA_DEBUG(1, "%s()\n", __FUNCTION__);
+	IRDA_DEBUG(1, "%s()\n", __func__);
 
 	IRDA_ASSERT(netdev != NULL, return -1;);
 	self = (struct irda_usb_cb *) netdev->priv;
@@ -1182,13 +1182,13 @@ static int irda_usb_net_open(struct net_device *netdev)
 	/* Can only open the device if it's there */
 	if(!self->present) {
 		spin_unlock_irqrestore(&self->lock, flags);
-		IRDA_WARNING("%s(), device not present!\n", __FUNCTION__);
+		IRDA_WARNING("%s(), device not present!\n", __func__);
 		return -1;
 	}
 
 	if(self->needspatch) {
 		spin_unlock_irqrestore(&self->lock, flags);
-		IRDA_WARNING("%s(), device needs patch\n", __FUNCTION__) ;
+		IRDA_WARNING("%s(), device needs patch\n", __func__) ;
 		return -EIO ;
 	}
 
@@ -1231,7 +1231,7 @@ static int irda_usb_net_open(struct net_device *netdev)
 			/* If this ever happen, we are in deep s***.
 			 * Basically, we can't start the Rx path... */
 			IRDA_WARNING("%s(), Failed to allocate Rx skb\n",
-				     __FUNCTION__);
+				     __func__);
 			return -1;
 		}
 		//skb_reserve(newskb, USB_IRDA_HEADER - 1);
@@ -1254,7 +1254,7 @@ static int irda_usb_net_close(struct net_device *netdev)
 	struct irda_usb_cb *self;
 	int	i;
 
-	IRDA_DEBUG(1, "%s()\n", __FUNCTION__);
+	IRDA_DEBUG(1, "%s()\n", __func__);
 
 	IRDA_ASSERT(netdev != NULL, return -1;);
 	self = (struct irda_usb_cb *) netdev->priv;
@@ -1309,7 +1309,7 @@ static int irda_usb_net_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
 	self = dev->priv;
 	IRDA_ASSERT(self != NULL, return -1;);
 
-	IRDA_DEBUG(2, "%s(), %s, (cmd=0x%X)\n", __FUNCTION__, dev->name, cmd);
+	IRDA_DEBUG(2, "%s(), %s, (cmd=0x%X)\n", __func__, dev->name, cmd);
 
 	switch (cmd) {
 	case SIOCSBANDWIDTH: /* Set bandwidth */
@@ -1367,7 +1367,7 @@ static inline void irda_usb_init_qos(struct irda_usb_cb *self)
 {
 	struct irda_class_desc *desc;
 
-	IRDA_DEBUG(3, "%s()\n", __FUNCTION__);
+	IRDA_DEBUG(3, "%s()\n", __func__);
 	
 	desc = self->irda_desc;
 	
@@ -1384,7 +1384,7 @@ static inline void irda_usb_init_qos(struct irda_usb_cb *self)
 	self->qos.data_size.bits       = desc->bmDataSize;
 
 	IRDA_DEBUG(0, "%s(), dongle says speed=0x%X, size=0x%X, window=0x%X, bofs=0x%X, turn=0x%X\n", 
-		__FUNCTION__, self->qos.baud_rate.bits, self->qos.data_size.bits, self->qos.window_size.bits, self->qos.additional_bofs.bits, self->qos.min_turn_time.bits);
+		__func__, self->qos.baud_rate.bits, self->qos.data_size.bits, self->qos.window_size.bits, self->qos.additional_bofs.bits, self->qos.min_turn_time.bits);
 
 	/* Don't always trust what the dongle tell us */
 	if(self->capability & IUC_SIR_ONLY)
@@ -1419,7 +1419,7 @@ static inline int irda_usb_open(struct irda_usb_cb *self)
 {
 	struct net_device *netdev = self->netdev;
 
-	IRDA_DEBUG(1, "%s()\n", __FUNCTION__);
+	IRDA_DEBUG(1, "%s()\n", __func__);
 
 	irda_usb_init_qos(self);
 
@@ -1442,7 +1442,7 @@ static inline int irda_usb_open(struct irda_usb_cb *self)
  */
 static inline void irda_usb_close(struct irda_usb_cb *self)
 {
-	IRDA_DEBUG(1, "%s()\n", __FUNCTION__);
+	IRDA_DEBUG(1, "%s()\n", __func__);
 
 	/* Remove netdevice */
 	unregister_netdev(self->netdev);
@@ -1515,13 +1515,13 @@ static inline int irda_usb_parse_endpoints(struct irda_usb_cb *self, struct usb_
 				/* This is our interrupt endpoint */
 				self->bulk_int_ep = ep;
 			} else {
-				IRDA_ERROR("%s(), Unrecognised endpoint %02X.\n", __FUNCTION__, ep);
+				IRDA_ERROR("%s(), Unrecognised endpoint %02X.\n", __func__, ep);
 			}
 		}
 	}
 
 	IRDA_DEBUG(0, "%s(), And our endpoints are : in=%02X, out=%02X (%d), int=%02X\n",
-		__FUNCTION__, self->bulk_in_ep, self->bulk_out_ep, self->bulk_out_mtu, self->bulk_int_ep);
+		__func__, self->bulk_in_ep, self->bulk_out_ep, self->bulk_out_mtu, self->bulk_int_ep);
 
 	return((self->bulk_in_ep != 0) && (self->bulk_out_ep != 0));
 }
@@ -1583,7 +1583,7 @@ static inline struct irda_class_desc *irda_usb_find_class_desc(struct usb_interf
 		0, intf->altsetting->desc.bInterfaceNumber, desc,
 		sizeof(*desc), 500);
 	
-	IRDA_DEBUG(1, "%s(), ret=%d\n", __FUNCTION__, ret);
+	IRDA_DEBUG(1, "%s(), ret=%d\n", __func__, ret);
 	if (ret < sizeof(*desc)) {
 		IRDA_WARNING("usb-irda: class_descriptor read %s (%d)\n",
 			     (ret<0) ? "failed" : "too short", ret);
@@ -1696,10 +1696,10 @@ static int irda_usb_probe(struct usb_interface *intf,
 			/* Martin Diehl says if we get a -EPIPE we should
 			 * be fine and we don't need to do a usb_clear_halt().
 			 * - Jean II */
-			IRDA_DEBUG(0, "%s(), Received -EPIPE, ignoring...\n", __FUNCTION__);
+			IRDA_DEBUG(0, "%s(), Received -EPIPE, ignoring...\n", __func__);
 			break;
 		default:
-			IRDA_DEBUG(0, "%s(), Unknown error %d\n", __FUNCTION__, ret);
+			IRDA_DEBUG(0, "%s(), Unknown error %d\n", __func__, ret);
 			ret = -EIO;
 			goto err_out_3;
 	}
@@ -1708,7 +1708,7 @@ static int irda_usb_probe(struct usb_interface *intf,
 	interface = intf->cur_altsetting;
 	if(!irda_usb_parse_endpoints(self, interface->endpoint,
 				     interface->desc.bNumEndpoints)) {
-		IRDA_ERROR("%s(), Bogus endpoints...\n", __FUNCTION__);
+		IRDA_ERROR("%s(), Bogus endpoints...\n", __func__);
 		ret = -EIO;
 		goto err_out_3;
 	}
@@ -1815,7 +1815,7 @@ static void irda_usb_disconnect(struct usb_interface *intf)
 	struct irda_usb_cb *self = usb_get_intfdata(intf);
 	int i;
 
-	IRDA_DEBUG(1, "%s()\n", __FUNCTION__);
+	IRDA_DEBUG(1, "%s()\n", __func__);
 
 	usb_set_intfdata(intf, NULL);
 	if (!self)
@@ -1865,7 +1865,7 @@ static void irda_usb_disconnect(struct usb_interface *intf)
 
 	/* Free self and network device */
 	free_netdev(self->netdev);
-	IRDA_DEBUG(0, "%s(), USB IrDA Disconnected\n", __FUNCTION__);
+	IRDA_DEBUG(0, "%s(), USB IrDA Disconnected\n", __func__);
 }
 
 /*------------------------------------------------------------------*/
diff --git a/drivers/net/irda/irtty-sir.c b/drivers/net/irda/irtty-sir.c
index 9e33196f9459..6bcee01c684c 100644
--- a/drivers/net/irda/irtty-sir.c
+++ b/drivers/net/irda/irtty-sir.c
@@ -231,7 +231,7 @@ static void irtty_receive_buf(struct tty_struct *tty, const unsigned char *cp,
 
 	dev = priv->dev;
 	if (!dev) {
-		IRDA_WARNING("%s(), not ready yet!\n", __FUNCTION__);
+		IRDA_WARNING("%s(), not ready yet!\n", __func__);
 		return;
 	}
 
@@ -388,7 +388,7 @@ static int irtty_ioctl(struct tty_struct *tty, struct file *file, unsigned int c
 	IRDA_ASSERT(priv != NULL, return -ENODEV;);
 	IRDA_ASSERT(priv->magic == IRTTY_MAGIC, return -EBADR;);
 
-	IRDA_DEBUG(3, "%s(cmd=0x%X)\n", __FUNCTION__, cmd);
+	IRDA_DEBUG(3, "%s(cmd=0x%X)\n", __func__, cmd);
 
 	dev = priv->dev;
 	IRDA_ASSERT(dev != NULL, return -1;);
@@ -476,7 +476,7 @@ static int irtty_open(struct tty_struct *tty)
 
 	mutex_unlock(&irtty_mutex);
 
-	IRDA_DEBUG(0, "%s - %s: irda line discipline opened\n", __FUNCTION__, tty->name);
+	IRDA_DEBUG(0, "%s - %s: irda line discipline opened\n", __func__, tty->name);
 
 	return 0;
 
@@ -528,7 +528,7 @@ static void irtty_close(struct tty_struct *tty)
 
 	kfree(priv);
 
-	IRDA_DEBUG(0, "%s - %s: irda line discipline closed\n", __FUNCTION__, tty->name);
+	IRDA_DEBUG(0, "%s - %s: irda line discipline closed\n", __func__, tty->name);
 }
 
 /* ------------------------------------------------------- */
@@ -566,7 +566,7 @@ static void __exit irtty_sir_cleanup(void)
 
 	if ((err = tty_unregister_ldisc(N_IRDA))) {
 		IRDA_ERROR("%s(), can't unregister line discipline (err = %d)\n",
-			   __FUNCTION__, err);
+			   __func__, err);
 	}
 }
 
diff --git a/drivers/net/irda/kingsun-sir.c b/drivers/net/irda/kingsun-sir.c
index 648e54b3f00e..73fe83be34fe 100644
--- a/drivers/net/irda/kingsun-sir.c
+++ b/drivers/net/irda/kingsun-sir.c
@@ -243,7 +243,7 @@ static void kingsun_rcv_irq(struct urb *urb)
 		}
 	} else if (urb->actual_length > 0) {
 		err("%s(): Unexpected response length, expected %d got %d",
-		    __FUNCTION__, kingsun->max_rx, urb->actual_length);
+		    __func__, kingsun->max_rx, urb->actual_length);
 	}
 	/* This urb has already been filled in kingsun_net_open */
 	ret = usb_submit_urb(urb, GFP_ATOMIC);
diff --git a/drivers/net/irda/litelink-sir.c b/drivers/net/irda/litelink-sir.c
index 73261c54bbfd..d6d9d2e5ad49 100644
--- a/drivers/net/irda/litelink-sir.c
+++ b/drivers/net/irda/litelink-sir.c
@@ -78,7 +78,7 @@ static int litelink_open(struct sir_dev *dev)
 {
 	struct qos_info *qos = &dev->qos;
 
-	IRDA_DEBUG(2, "%s()\n", __FUNCTION__);
+	IRDA_DEBUG(2, "%s()\n", __func__);
 
 	/* Power up dongle */
 	sirdev_set_dtr_rts(dev, TRUE, TRUE);
@@ -95,7 +95,7 @@ static int litelink_open(struct sir_dev *dev)
 
 static int litelink_close(struct sir_dev *dev)
 {
-	IRDA_DEBUG(2, "%s()\n", __FUNCTION__);
+	IRDA_DEBUG(2, "%s()\n", __func__);
 
 	/* Power off dongle */
 	sirdev_set_dtr_rts(dev, FALSE, FALSE);
@@ -113,7 +113,7 @@ static int litelink_change_speed(struct sir_dev *dev, unsigned speed)
 {
         int i;
 
-	IRDA_DEBUG(2, "%s()\n", __FUNCTION__);
+	IRDA_DEBUG(2, "%s()\n", __func__);
 
 	/* dongle already reset by irda-thread - current speed (dongle and
 	 * port) is the default speed (115200 for litelink!)
@@ -156,7 +156,7 @@ static int litelink_change_speed(struct sir_dev *dev, unsigned speed)
  */
 static int litelink_reset(struct sir_dev *dev)
 {
-	IRDA_DEBUG(2, "%s()\n", __FUNCTION__);
+	IRDA_DEBUG(2, "%s()\n", __func__);
 
 	/* probably the power-up can be dropped here, but with only
 	 * 15 usec delay it's not worth the risk unless somebody with
diff --git a/drivers/net/irda/ma600-sir.c b/drivers/net/irda/ma600-sir.c
index 809906d94762..1ceed9cfb7c4 100644
--- a/drivers/net/irda/ma600-sir.c
+++ b/drivers/net/irda/ma600-sir.c
@@ -67,13 +67,13 @@ static struct dongle_driver ma600 = {
 
 static int __init ma600_sir_init(void)
 {
-	IRDA_DEBUG(2, "%s()\n", __FUNCTION__);
+	IRDA_DEBUG(2, "%s()\n", __func__);
 	return irda_register_dongle(&ma600);
 }
 
 static void __exit ma600_sir_cleanup(void)
 {
-	IRDA_DEBUG(2, "%s()\n", __FUNCTION__);
+	IRDA_DEBUG(2, "%s()\n", __func__);
 	irda_unregister_dongle(&ma600);
 }
 
@@ -88,7 +88,7 @@ static int ma600_open(struct sir_dev *dev)
 {
 	struct qos_info *qos = &dev->qos;
 
-	IRDA_DEBUG(2, "%s()\n", __FUNCTION__);
+	IRDA_DEBUG(2, "%s()\n", __func__);
 
 	sirdev_set_dtr_rts(dev, TRUE, TRUE);
 
@@ -106,7 +106,7 @@ static int ma600_open(struct sir_dev *dev)
 
 static int ma600_close(struct sir_dev *dev)
 {
-	IRDA_DEBUG(2, "%s()\n", __FUNCTION__);
+	IRDA_DEBUG(2, "%s()\n", __func__);
 
 	/* Power off dongle */
 	sirdev_set_dtr_rts(dev, FALSE, FALSE);
@@ -176,7 +176,7 @@ static int ma600_change_speed(struct sir_dev *dev, unsigned speed)
 {
 	u8	byte;
 	
-	IRDA_DEBUG(2, "%s(), speed=%d (was %d)\n", __FUNCTION__,
+	IRDA_DEBUG(2, "%s(), speed=%d (was %d)\n", __func__,
 		speed, dev->speed);
 
 	/* dongle already reset, dongle and port at default speed (9600) */
@@ -201,12 +201,12 @@ static int ma600_change_speed(struct sir_dev *dev, unsigned speed)
 	sirdev_raw_read(dev, &byte, sizeof(byte));
 	if (byte != get_control_byte(speed))  {
 		IRDA_WARNING("%s(): bad control byte read-back %02x != %02x\n",
-			     __FUNCTION__, (unsigned) byte,
+			     __func__, (unsigned) byte,
 			     (unsigned) get_control_byte(speed));
 		return -1;
 	}
 	else
-		IRDA_DEBUG(2, "%s() control byte write read OK\n", __FUNCTION__);
+		IRDA_DEBUG(2, "%s() control byte write read OK\n", __func__);
 #endif
 
 	/* Set DTR, Set RTS */
@@ -238,7 +238,7 @@ static int ma600_change_speed(struct sir_dev *dev, unsigned speed)
 
 int ma600_reset(struct sir_dev *dev)
 {
-	IRDA_DEBUG(2, "%s()\n", __FUNCTION__);
+	IRDA_DEBUG(2, "%s()\n", __func__);
 
 	/* Reset the dongle : set DTR low for 10 ms */
 	sirdev_set_dtr_rts(dev, FALSE, TRUE);
diff --git a/drivers/net/irda/mcp2120-sir.c b/drivers/net/irda/mcp2120-sir.c
index 67bd016e4df8..5e2f4859cee7 100644
--- a/drivers/net/irda/mcp2120-sir.c
+++ b/drivers/net/irda/mcp2120-sir.c
@@ -63,7 +63,7 @@ static int mcp2120_open(struct sir_dev *dev)
 {
 	struct qos_info *qos = &dev->qos;
 
-	IRDA_DEBUG(2, "%s()\n", __FUNCTION__);
+	IRDA_DEBUG(2, "%s()\n", __func__);
 
 	/* seems no explicit power-on required here and reset switching it on anyway */
 
@@ -76,7 +76,7 @@ static int mcp2120_open(struct sir_dev *dev)
 
 static int mcp2120_close(struct sir_dev *dev)
 {
-	IRDA_DEBUG(2, "%s()\n", __FUNCTION__);
+	IRDA_DEBUG(2, "%s()\n", __func__);
 
 	/* Power off dongle */
         /* reset and inhibit mcp2120 */
@@ -102,7 +102,7 @@ static int mcp2120_change_speed(struct sir_dev *dev, unsigned speed)
 	u8 control[2];
 	static int ret = 0;
 
-	IRDA_DEBUG(2, "%s()\n", __FUNCTION__);
+	IRDA_DEBUG(2, "%s()\n", __func__);
 
 	switch (state) {
 	case SIRDEV_STATE_DONGLE_SPEED:
@@ -155,7 +155,7 @@ static int mcp2120_change_speed(struct sir_dev *dev, unsigned speed)
 		break;
 
 	default:
-		IRDA_ERROR("%s(), undefine state %d\n", __FUNCTION__, state);
+		IRDA_ERROR("%s(), undefine state %d\n", __func__, state);
 		ret = -EINVAL;
 		break;
 	}
@@ -187,7 +187,7 @@ static int mcp2120_reset(struct sir_dev *dev)
 	unsigned delay = 0;
 	int ret = 0;
 
-	IRDA_DEBUG(2, "%s()\n", __FUNCTION__);
+	IRDA_DEBUG(2, "%s()\n", __func__);
 
 	switch (state) {
 	case SIRDEV_STATE_DONGLE_RESET:
@@ -213,7 +213,7 @@ static int mcp2120_reset(struct sir_dev *dev)
 		break;
 
 	default:
-		IRDA_ERROR("%s(), undefined state %d\n", __FUNCTION__, state);
+		IRDA_ERROR("%s(), undefined state %d\n", __func__, state);
 		ret = -EINVAL;
 		break;
 	}
diff --git a/drivers/net/irda/nsc-ircc.c b/drivers/net/irda/nsc-ircc.c
index effc1ce8179a..8583d951a6ad 100644
--- a/drivers/net/irda/nsc-ircc.c
+++ b/drivers/net/irda/nsc-ircc.c
@@ -151,8 +151,8 @@ static char *dongle_types[] = {
 static chipio_t pnp_info;
 static const struct pnp_device_id nsc_ircc_pnp_table[] = {
 	{ .id = "NSC6001", .driver_data = 0 },
-	{ .id = "IBM0071", .driver_data = 0 },
 	{ .id = "HWPC224", .driver_data = 0 },
+	{ .id = "IBM0071", .driver_data = NSC_FORCE_DONGLE_TYPE9 },
 	{ }
 };
 
@@ -223,7 +223,7 @@ static int __init nsc_ircc_init(void)
 
 	/* Probe for all the NSC chipsets we know about */
 	for (chip = chips; chip->name ; chip++) {
-		IRDA_DEBUG(2, "%s(), Probing for %s ...\n", __FUNCTION__,
+		IRDA_DEBUG(2, "%s(), Probing for %s ...\n", __func__,
 			   chip->name);
 		
 		/* Try all config registers for this chip */
@@ -235,7 +235,7 @@ static int __init nsc_ircc_init(void)
 			/* Read index register */
 			reg = inb(cfg_base);
 			if (reg == 0xff) {
-				IRDA_DEBUG(2, "%s() no chip at 0x%03x\n", __FUNCTION__, cfg_base);
+				IRDA_DEBUG(2, "%s() no chip at 0x%03x\n", __func__, cfg_base);
 				continue;
 			}
 			
@@ -244,7 +244,7 @@ static int __init nsc_ircc_init(void)
 			id = inb(cfg_base+1);
 			if ((id & chip->cid_mask) == chip->cid_value) {
 				IRDA_DEBUG(2, "%s() Found %s chip, revision=%d\n",
-					   __FUNCTION__, chip->name, id & ~chip->cid_mask);
+					   __func__, chip->name, id & ~chip->cid_mask);
 
 				/*
 				 * If we found a correct PnP setting,
@@ -295,7 +295,7 @@ static int __init nsc_ircc_init(void)
 				}
 				i++;
 			} else {
-				IRDA_DEBUG(2, "%s(), Wrong chip id=0x%02x\n", __FUNCTION__, id);
+				IRDA_DEBUG(2, "%s(), Wrong chip id=0x%02x\n", __func__, id);
 			}
 		} 
 	}
@@ -345,7 +345,7 @@ static int __init nsc_ircc_open(chipio_t *info)
 	void *ret;
 	int err, chip_index;
 
-	IRDA_DEBUG(2, "%s()\n", __FUNCTION__);
+	IRDA_DEBUG(2, "%s()\n", __func__);
 
 
  	for (chip_index = 0; chip_index < ARRAY_SIZE(dev_self); chip_index++) {
@@ -354,7 +354,7 @@ static int __init nsc_ircc_open(chipio_t *info)
 	}
 
 	if (chip_index == ARRAY_SIZE(dev_self)) {
-		IRDA_ERROR("%s(), maximum number of supported chips reached!\n", __FUNCTION__);
+		IRDA_ERROR("%s(), maximum number of supported chips reached!\n", __func__);
 		return -ENOMEM;
 	}
 
@@ -369,7 +369,7 @@ static int __init nsc_ircc_open(chipio_t *info)
 	dev = alloc_irdadev(sizeof(struct nsc_ircc_cb));
 	if (dev == NULL) {
 		IRDA_ERROR("%s(), can't allocate memory for "
-			   "control block!\n", __FUNCTION__);
+			   "control block!\n", __func__);
 		return -ENOMEM;
 	}
 
@@ -393,7 +393,7 @@ static int __init nsc_ircc_open(chipio_t *info)
 	ret = request_region(self->io.fir_base, self->io.fir_ext, driver_name);
 	if (!ret) {
 		IRDA_WARNING("%s(), can't get iobase of 0x%03x\n",
-			     __FUNCTION__, self->io.fir_base);
+			     __func__, self->io.fir_base);
 		err = -ENODEV;
 		goto out1;
 	}
@@ -450,7 +450,7 @@ static int __init nsc_ircc_open(chipio_t *info)
 
 	err = register_netdev(dev);
 	if (err) {
-		IRDA_ERROR("%s(), register_netdev() failed!\n", __FUNCTION__);
+		IRDA_ERROR("%s(), register_netdev() failed!\n", __func__);
 		goto out4;
 	}
 	IRDA_MESSAGE("IrDA: Registered device %s\n", dev->name);
@@ -506,7 +506,7 @@ static int __exit nsc_ircc_close(struct nsc_ircc_cb *self)
 {
 	int iobase;
 
-	IRDA_DEBUG(4, "%s()\n", __FUNCTION__);
+	IRDA_DEBUG(4, "%s()\n", __func__);
 
 	IRDA_ASSERT(self != NULL, return -1;);
 
@@ -519,7 +519,7 @@ static int __exit nsc_ircc_close(struct nsc_ircc_cb *self)
 
 	/* Release the PORT that this driver is using */
 	IRDA_DEBUG(4, "%s(), Releasing Region %03x\n", 
-		   __FUNCTION__, self->io.fir_base);
+		   __func__, self->io.fir_base);
 	release_region(self->io.fir_base, self->io.fir_ext);
 
 	if (self->tx_buff.head)
@@ -557,7 +557,7 @@ static int nsc_ircc_init_108(nsc_chip_t *chip, chipio_t *info)
 	case 0x2e8: outb(0x15, cfg_base+1); break;
 	case 0x3f8: outb(0x16, cfg_base+1); break;
 	case 0x2f8: outb(0x17, cfg_base+1); break;
-	default: IRDA_ERROR("%s(), invalid base_address", __FUNCTION__);
+	default: IRDA_ERROR("%s(), invalid base_address", __func__);
 	}
 	
 	/* Control Signal Routing Register (CSRT) */
@@ -569,7 +569,7 @@ static int nsc_ircc_init_108(nsc_chip_t *chip, chipio_t *info)
 	case 9:  temp = 0x05; break;
 	case 11: temp = 0x06; break;
 	case 15: temp = 0x07; break;
-	default: IRDA_ERROR("%s(), invalid irq", __FUNCTION__);
+	default: IRDA_ERROR("%s(), invalid irq", __func__);
 	}
 	outb(CFG_108_CSRT, cfg_base);
 	
@@ -577,7 +577,7 @@ static int nsc_ircc_init_108(nsc_chip_t *chip, chipio_t *info)
 	case 0: outb(0x08+temp, cfg_base+1); break;
 	case 1: outb(0x10+temp, cfg_base+1); break;
 	case 3: outb(0x18+temp, cfg_base+1); break;
-	default: IRDA_ERROR("%s(), invalid dma", __FUNCTION__);
+	default: IRDA_ERROR("%s(), invalid dma", __func__);
 	}
 	
 	outb(CFG_108_MCTL, cfg_base);      /* Mode Control Register (MCTL) */
@@ -616,7 +616,7 @@ static int nsc_ircc_probe_108(nsc_chip_t *chip, chipio_t *info)
 		break;
 	}
 	info->sir_base = info->fir_base;
-	IRDA_DEBUG(2, "%s(), probing fir_base=0x%03x\n", __FUNCTION__,
+	IRDA_DEBUG(2, "%s(), probing fir_base=0x%03x\n", __func__,
 		   info->fir_base);
 
 	/* Read control signals routing register (CSRT) */
@@ -649,7 +649,7 @@ static int nsc_ircc_probe_108(nsc_chip_t *chip, chipio_t *info)
 		info->irq = 15;
 		break;
 	}
-	IRDA_DEBUG(2, "%s(), probing irq=%d\n", __FUNCTION__, info->irq);
+	IRDA_DEBUG(2, "%s(), probing irq=%d\n", __func__, info->irq);
 
 	/* Currently we only read Rx DMA but it will also be used for Tx */
 	switch ((reg >> 3) & 0x03) {
@@ -666,7 +666,7 @@ static int nsc_ircc_probe_108(nsc_chip_t *chip, chipio_t *info)
 		info->dma = 3;
 		break;
 	}
-	IRDA_DEBUG(2, "%s(), probing dma=%d\n", __FUNCTION__, info->dma);
+	IRDA_DEBUG(2, "%s(), probing dma=%d\n", __func__, info->dma);
 
 	/* Read mode control register (MCTL) */
 	outb(CFG_108_MCTL, cfg_base);
@@ -823,7 +823,7 @@ static int nsc_ircc_init_39x(nsc_chip_t *chip, chipio_t *info)
 	/* User is sure about his config... accept it. */
 	IRDA_DEBUG(2, "%s(): nsc_ircc_init_39x (user settings): "
 		   "io=0x%04x, irq=%d, dma=%d\n", 
-		   __FUNCTION__, info->fir_base, info->irq, info->dma);
+		   __func__, info->fir_base, info->irq, info->dma);
 
 	/* Access bank for SP2 */
 	outb(CFG_39X_LDN, cfg_base);
@@ -864,7 +864,7 @@ static int nsc_ircc_probe_39x(nsc_chip_t *chip, chipio_t *info)
 	int enabled, susp;
 
 	IRDA_DEBUG(2, "%s(), nsc_ircc_probe_39x, base=%d\n",
-		   __FUNCTION__, cfg_base);
+		   __func__, cfg_base);
 
 	/* This function should be executed with irq off to avoid
 	 * another driver messing with the Super I/O bank - Jean II */
@@ -898,7 +898,7 @@ static int nsc_ircc_probe_39x(nsc_chip_t *chip, chipio_t *info)
 	outb(CFG_39X_SPC, cfg_base);
 	susp = 1 - ((inb(cfg_base+1) & 0x02) >> 1);
 
-	IRDA_DEBUG(2, "%s(): io=0x%02x%02x, irq=%d (type %d), rxdma=%d, txdma=%d, enabled=%d (suspended=%d)\n", __FUNCTION__, reg1,reg2,irq,irqt,dma1,dma2,enabled,susp);
+	IRDA_DEBUG(2, "%s(): io=0x%02x%02x, irq=%d (type %d), rxdma=%d, txdma=%d, enabled=%d (suspended=%d)\n", __func__, reg1,reg2,irq,irqt,dma1,dma2,enabled,susp);
 
 	/* Configure SP2 */
 
@@ -930,7 +930,10 @@ static int nsc_ircc_pnp_probe(struct pnp_dev *dev, const struct pnp_device_id *i
 	pnp_info.dma = -1;
 	pnp_succeeded = 1;
 
-	/* There don't seem to be any way to get the cfg_base.
+	if (id->driver_data & NSC_FORCE_DONGLE_TYPE9)
+		dongle_id = 0x9;
+
+	/* There doesn't seem to be any way of getting the cfg_base.
 	 * On my box, cfg_base is in the PnP descriptor of the
 	 * motherboard. Oh well... Jean II */
 
@@ -947,7 +950,7 @@ static int nsc_ircc_pnp_probe(struct pnp_dev *dev, const struct pnp_device_id *i
 		pnp_info.dma = pnp_dma(dev, 0);
 
 	IRDA_DEBUG(0, "%s() : From PnP, found firbase 0x%03X ; irq %d ; dma %d.\n",
-		   __FUNCTION__, pnp_info.fir_base, pnp_info.irq, pnp_info.dma);
+		   __func__, pnp_info.fir_base, pnp_info.irq, pnp_info.dma);
 
 	if((pnp_info.fir_base == 0) ||
 	   (pnp_info.irq == -1) || (pnp_info.dma == -1)) {
@@ -976,7 +979,7 @@ static int nsc_ircc_setup(chipio_t *info)
 	version = inb(iobase+MID);
 
 	IRDA_DEBUG(2, "%s() Driver %s Found chip version %02x\n",
-		   __FUNCTION__, driver_name, version);
+		   __func__, driver_name, version);
 
 	/* Should be 0x2? */
 	if (0x20 != (version & 0xf0)) {
@@ -1080,30 +1083,30 @@ static void nsc_ircc_init_dongle_interface (int iobase, int dongle_id)
 	case 0x00: /* same as */
 	case 0x01: /* Differential serial interface */
 		IRDA_DEBUG(0, "%s(), %s not defined by irda yet\n",
-			   __FUNCTION__, dongle_types[dongle_id]); 
+			   __func__, dongle_types[dongle_id]);
 		break;
 	case 0x02: /* same as */
 	case 0x03: /* Reserved */
 		IRDA_DEBUG(0, "%s(), %s not defined by irda yet\n",
-			   __FUNCTION__, dongle_types[dongle_id]); 
+			   __func__, dongle_types[dongle_id]);
 		break;
 	case 0x04: /* Sharp RY5HD01 */
 		break;
 	case 0x05: /* Reserved, but this is what the Thinkpad reports */
 		IRDA_DEBUG(0, "%s(), %s not defined by irda yet\n",
-			   __FUNCTION__, dongle_types[dongle_id]); 
+			   __func__, dongle_types[dongle_id]);
 		break;
 	case 0x06: /* Single-ended serial interface */
 		IRDA_DEBUG(0, "%s(), %s not defined by irda yet\n",
-			   __FUNCTION__, dongle_types[dongle_id]); 
+			   __func__, dongle_types[dongle_id]);
 		break;
 	case 0x07: /* Consumer-IR only */
 		IRDA_DEBUG(0, "%s(), %s is not for IrDA mode\n",
-			   __FUNCTION__, dongle_types[dongle_id]); 
+			   __func__, dongle_types[dongle_id]);
 		break;
 	case 0x08: /* HP HSDL-2300, HP HSDL-3600/HSDL-3610 */
 		IRDA_DEBUG(0, "%s(), %s\n",
-			   __FUNCTION__, dongle_types[dongle_id]);
+			   __func__, dongle_types[dongle_id]);
 		break;
 	case 0x09: /* IBM31T1100 or Temic TFDS6000/TFDS6500 */
 		outb(0x28, iobase+7); /* Set irsl[0-2] as output */
@@ -1111,7 +1114,7 @@ static void nsc_ircc_init_dongle_interface (int iobase, int dongle_id)
 	case 0x0A: /* same as */
 	case 0x0B: /* Reserved */
 		IRDA_DEBUG(0, "%s(), %s not defined by irda yet\n",
-			   __FUNCTION__, dongle_types[dongle_id]); 
+			   __func__, dongle_types[dongle_id]);
 		break;
 	case 0x0C: /* same as */
 	case 0x0D: /* HP HSDL-1100/HSDL-2100 */
@@ -1126,14 +1129,14 @@ static void nsc_ircc_init_dongle_interface (int iobase, int dongle_id)
 		break;
 	case 0x0F: /* No dongle connected */
 		IRDA_DEBUG(0, "%s(), %s\n",
-			   __FUNCTION__, dongle_types[dongle_id]); 
+			   __func__, dongle_types[dongle_id]);
 
 		switch_bank(iobase, BANK0);
 		outb(0x62, iobase+MCR);
 		break;
 	default: 
 		IRDA_DEBUG(0, "%s(), invalid dongle_id %#x", 
-			   __FUNCTION__, dongle_id);
+			   __func__, dongle_id);
 	}
 	
 	/* IRCFG1: IRSL1 and 2 are set to IrDA mode */
@@ -1165,30 +1168,30 @@ static void nsc_ircc_change_dongle_speed(int iobase, int speed, int dongle_id)
 	case 0x00: /* same as */
 	case 0x01: /* Differential serial interface */
 		IRDA_DEBUG(0, "%s(), %s not defined by irda yet\n",
-			   __FUNCTION__, dongle_types[dongle_id]); 
+			   __func__, dongle_types[dongle_id]);
 		break;
 	case 0x02: /* same as */
 	case 0x03: /* Reserved */
 		IRDA_DEBUG(0, "%s(), %s not defined by irda yet\n",
-			   __FUNCTION__, dongle_types[dongle_id]); 
+			   __func__, dongle_types[dongle_id]);
 		break;
 	case 0x04: /* Sharp RY5HD01 */
 		break;
 	case 0x05: /* Reserved */
 		IRDA_DEBUG(0, "%s(), %s not defined by irda yet\n",
-			   __FUNCTION__, dongle_types[dongle_id]); 
+			   __func__, dongle_types[dongle_id]);
 		break;
 	case 0x06: /* Single-ended serial interface */
 		IRDA_DEBUG(0, "%s(), %s not defined by irda yet\n",
-			   __FUNCTION__, dongle_types[dongle_id]); 
+			   __func__, dongle_types[dongle_id]);
 		break;
 	case 0x07: /* Consumer-IR only */
 		IRDA_DEBUG(0, "%s(), %s is not for IrDA mode\n",
-			   __FUNCTION__, dongle_types[dongle_id]); 
+			   __func__, dongle_types[dongle_id]);
 		break;
 	case 0x08: /* HP HSDL-2300, HP HSDL-3600/HSDL-3610 */
 		IRDA_DEBUG(0, "%s(), %s\n", 
-			   __FUNCTION__, dongle_types[dongle_id]); 
+			   __func__, dongle_types[dongle_id]);
 		outb(0x00, iobase+4);
 		if (speed > 115200)
 			outb(0x01, iobase+4);
@@ -1207,7 +1210,7 @@ static void nsc_ircc_change_dongle_speed(int iobase, int speed, int dongle_id)
 	case 0x0A: /* same as */
 	case 0x0B: /* Reserved */
 		IRDA_DEBUG(0, "%s(), %s not defined by irda yet\n",
-			   __FUNCTION__, dongle_types[dongle_id]); 
+			   __func__, dongle_types[dongle_id]);
 		break;
 	case 0x0C: /* same as */
 	case 0x0D: /* HP HSDL-1100/HSDL-2100 */
@@ -1216,13 +1219,13 @@ static void nsc_ircc_change_dongle_speed(int iobase, int speed, int dongle_id)
 		break;
 	case 0x0F: /* No dongle connected */
 		IRDA_DEBUG(0, "%s(), %s is not for IrDA mode\n",
-			   __FUNCTION__, dongle_types[dongle_id]);
+			   __func__, dongle_types[dongle_id]);
 
 		switch_bank(iobase, BANK0); 
 		outb(0x62, iobase+MCR);
 		break;
 	default: 
-		IRDA_DEBUG(0, "%s(), invalid data_rate\n", __FUNCTION__);
+		IRDA_DEBUG(0, "%s(), invalid data_rate\n", __func__);
 	}
 	/* Restore bank register */
 	outb(bank, iobase+BSR);
@@ -1243,7 +1246,7 @@ static __u8 nsc_ircc_change_speed(struct nsc_ircc_cb *self, __u32 speed)
 	__u8 bank;
 	__u8 ier;                  /* Interrupt enable register */
 
-	IRDA_DEBUG(2, "%s(), speed=%d\n", __FUNCTION__, speed);
+	IRDA_DEBUG(2, "%s(), speed=%d\n", __func__, speed);
 
 	IRDA_ASSERT(self != NULL, return 0;);
 
@@ -1276,20 +1279,20 @@ static __u8 nsc_ircc_change_speed(struct nsc_ircc_cb *self, __u32 speed)
 		outb(inb(iobase+4) | 0x04, iobase+4);
 	       
 		mcr = MCR_MIR;
-		IRDA_DEBUG(0, "%s(), handling baud of 576000\n", __FUNCTION__);
+		IRDA_DEBUG(0, "%s(), handling baud of 576000\n", __func__);
 		break;
 	case 1152000:
 		mcr = MCR_MIR;
-		IRDA_DEBUG(0, "%s(), handling baud of 1152000\n", __FUNCTION__);
+		IRDA_DEBUG(0, "%s(), handling baud of 1152000\n", __func__);
 		break;
 	case 4000000:
 		mcr = MCR_FIR;
-		IRDA_DEBUG(0, "%s(), handling baud of 4000000\n", __FUNCTION__);
+		IRDA_DEBUG(0, "%s(), handling baud of 4000000\n", __func__);
 		break;
 	default:
 		mcr = MCR_FIR;
 		IRDA_DEBUG(0, "%s(), unknown baud rate of %d\n", 
-			   __FUNCTION__, speed);
+			   __func__, speed);
 		break;
 	}
 
@@ -1594,7 +1597,7 @@ static int nsc_ircc_pio_write(int iobase, __u8 *buf, int len, int fifo_size)
 	int actual = 0;
 	__u8 bank;
 	
-	IRDA_DEBUG(4, "%s()\n", __FUNCTION__);
+	IRDA_DEBUG(4, "%s()\n", __func__);
 
 	/* Save current bank */
 	bank = inb(iobase+BSR);
@@ -1602,7 +1605,7 @@ static int nsc_ircc_pio_write(int iobase, __u8 *buf, int len, int fifo_size)
 	switch_bank(iobase, BANK0);
 	if (!(inb_p(iobase+LSR) & LSR_TXEMP)) {
 		IRDA_DEBUG(4, "%s(), warning, FIFO not empty yet!\n",
-			   __FUNCTION__);
+			   __func__);
 
 		/* FIFO may still be filled to the Tx interrupt threshold */
 		fifo_size -= 17;
@@ -1615,7 +1618,7 @@ static int nsc_ircc_pio_write(int iobase, __u8 *buf, int len, int fifo_size)
 	}
         
 	IRDA_DEBUG(4, "%s(), fifo_size %d ; %d sent of %d\n", 
-		   __FUNCTION__, fifo_size, actual, len);
+		   __func__, fifo_size, actual, len);
 	
 	/* Restore bank */
 	outb(bank, iobase+BSR);
@@ -1636,7 +1639,7 @@ static int nsc_ircc_dma_xmit_complete(struct nsc_ircc_cb *self)
 	__u8 bank;
 	int ret = TRUE;
 
-	IRDA_DEBUG(2, "%s()\n", __FUNCTION__);
+	IRDA_DEBUG(2, "%s()\n", __func__);
 
 	iobase = self->io.fir_base;
 
@@ -1767,7 +1770,7 @@ static int nsc_ircc_dma_receive_complete(struct nsc_ircc_cb *self, int iobase)
 		len = inb(iobase+RFLFL) | ((inb(iobase+RFLFH) & 0x1f) << 8);
 
 		if (st_fifo->tail >= MAX_RX_WINDOW) {
-			IRDA_DEBUG(0, "%s(), window is full!\n", __FUNCTION__);
+			IRDA_DEBUG(0, "%s(), window is full!\n", __func__);
 			continue;
 		}
 			
@@ -1859,7 +1862,7 @@ static int nsc_ircc_dma_receive_complete(struct nsc_ircc_cb *self, int iobase)
 			if (skb == NULL)  {
 				IRDA_WARNING("%s(), memory squeeze, "
 					     "dropping frame.\n",
-					     __FUNCTION__);
+					     __func__);
 				self->stats.rx_dropped++;
 
 				/* Restore bank register */
@@ -1965,7 +1968,7 @@ static void nsc_ircc_sir_interrupt(struct nsc_ircc_cb *self, int eir)
 		 * Need to be after self->io.direction to avoid race with
 		 * nsc_ircc_hard_xmit_sir() - Jean II */
 		if (self->new_speed) {
-			IRDA_DEBUG(2, "%s(), Changing speed!\n", __FUNCTION__);
+			IRDA_DEBUG(2, "%s(), Changing speed!\n", __func__);
 			self->ier = nsc_ircc_change_speed(self,
 							  self->new_speed);
 			self->new_speed = 0;
@@ -2051,7 +2054,7 @@ static void nsc_ircc_fir_interrupt(struct nsc_ircc_cb *self, int iobase,
 				} else
 					IRDA_WARNING("%s(), potential "
 						     "Tx queue lockup !\n",
-						     __FUNCTION__);
+						     __func__);
 			}
 		} else {
 			/*  Not finished yet, so interrupt on DMA again */
@@ -2160,7 +2163,7 @@ static int nsc_ircc_net_open(struct net_device *dev)
 	char hwname[32];
 	__u8 bank;
 	
-	IRDA_DEBUG(4, "%s()\n", __FUNCTION__);
+	IRDA_DEBUG(4, "%s()\n", __func__);
 	
 	IRDA_ASSERT(dev != NULL, return -1;);
 	self = (struct nsc_ircc_cb *) dev->priv;
@@ -2222,7 +2225,7 @@ static int nsc_ircc_net_close(struct net_device *dev)
 	int iobase;
 	__u8 bank;
 
-	IRDA_DEBUG(4, "%s()\n", __FUNCTION__);
+	IRDA_DEBUG(4, "%s()\n", __func__);
 	
 	IRDA_ASSERT(dev != NULL, return -1;);
 
@@ -2276,7 +2279,7 @@ static int nsc_ircc_net_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
 
 	IRDA_ASSERT(self != NULL, return -1;);
 
-	IRDA_DEBUG(2, "%s(), %s, (cmd=0x%X)\n", __FUNCTION__, dev->name, cmd);
+	IRDA_DEBUG(2, "%s(), %s, (cmd=0x%X)\n", __func__, dev->name, cmd);
 	
 	switch (cmd) {
 	case SIOCSBANDWIDTH: /* Set bandwidth */
diff --git a/drivers/net/irda/nsc-ircc.h b/drivers/net/irda/nsc-ircc.h
index 29398a4f73fd..71cd3c5a0762 100644
--- a/drivers/net/irda/nsc-ircc.h
+++ b/drivers/net/irda/nsc-ircc.h
@@ -35,6 +35,9 @@
 #include <linux/types.h>
 #include <asm/io.h>
 
+/* Features for chips (set in driver_data) */
+#define NSC_FORCE_DONGLE_TYPE9	0x00000001
+
 /* DMA modes needed */
 #define DMA_TX_MODE     0x08    /* Mem to I/O, ++, demand. */
 #define DMA_RX_MODE     0x04    /* I/O to mem, ++, demand. */
diff --git a/drivers/net/irda/old_belkin-sir.c b/drivers/net/irda/old_belkin-sir.c
index 8c22c7374a23..75714bc71030 100644
--- a/drivers/net/irda/old_belkin-sir.c
+++ b/drivers/net/irda/old_belkin-sir.c
@@ -92,7 +92,7 @@ static int old_belkin_open(struct sir_dev *dev)
 {
 	struct qos_info *qos = &dev->qos;
 
-	IRDA_DEBUG(2, "%s()\n", __FUNCTION__);
+	IRDA_DEBUG(2, "%s()\n", __func__);
 
 	/* Power on dongle */
 	sirdev_set_dtr_rts(dev, TRUE, TRUE);
@@ -110,7 +110,7 @@ static int old_belkin_open(struct sir_dev *dev)
 
 static int old_belkin_close(struct sir_dev *dev)
 {
-	IRDA_DEBUG(2, "%s()\n", __FUNCTION__);
+	IRDA_DEBUG(2, "%s()\n", __func__);
 
 	/* Power off dongle */
 	sirdev_set_dtr_rts(dev, FALSE, FALSE);
@@ -125,7 +125,7 @@ static int old_belkin_close(struct sir_dev *dev)
  */
 static int old_belkin_change_speed(struct sir_dev *dev, unsigned speed)
 {
-	IRDA_DEBUG(2, "%s()\n", __FUNCTION__);
+	IRDA_DEBUG(2, "%s()\n", __func__);
 
 	dev->speed = 9600;
 	return (speed==dev->speed) ? 0 : -EINVAL;
@@ -139,7 +139,7 @@ static int old_belkin_change_speed(struct sir_dev *dev, unsigned speed)
  */
 static int old_belkin_reset(struct sir_dev *dev)
 {
-	IRDA_DEBUG(2, "%s()\n", __FUNCTION__);
+	IRDA_DEBUG(2, "%s()\n", __func__);
 
 	/* This dongles speed "defaults" to 9600 bps ;-) */
 	dev->speed = 9600;
diff --git a/drivers/net/irda/pxaficp_ir.c b/drivers/net/irda/pxaficp_ir.c
index f76b0b6c277d..4aa61a1a3d55 100644
--- a/drivers/net/irda/pxaficp_ir.c
+++ b/drivers/net/irda/pxaficp_ir.c
@@ -23,8 +23,8 @@
 #include <net/irda/irda_device.h>
 
 #include <asm/dma.h>
-#include <asm/arch/irda.h>
-#include <asm/arch/pxa-regs.h>
+#include <mach/irda.h>
+#include <mach/pxa-regs.h>
 
 #define IrSR_RXPL_NEG_IS_ZERO (1<<4)
 #define IrSR_RXPL_POS_IS_ZERO 0x0
diff --git a/drivers/net/irda/sa1100_ir.c b/drivers/net/irda/sa1100_ir.c
index 1bc8518f9197..a95188948de7 100644
--- a/drivers/net/irda/sa1100_ir.c
+++ b/drivers/net/irda/sa1100_ir.c
@@ -37,7 +37,7 @@
 
 #include <asm/irq.h>
 #include <asm/dma.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/mach/irda.h>
 
 static int power_level = 3;
diff --git a/drivers/net/irda/sir_dev.c b/drivers/net/irda/sir_dev.c
index 6078e03de9a8..3f32909c24c8 100644
--- a/drivers/net/irda/sir_dev.c
+++ b/drivers/net/irda/sir_dev.c
@@ -80,7 +80,7 @@ static int sirdev_tx_complete_fsm(struct sir_dev *dev)
 			return 0;
 
 		default:
-			IRDA_ERROR("%s - undefined state\n", __FUNCTION__);
+			IRDA_ERROR("%s - undefined state\n", __func__);
 			return -EINVAL;
 		}
 		fsm->substate = next_state;
@@ -107,11 +107,11 @@ static void sirdev_config_fsm(struct work_struct *work)
 	int ret = -1;
 	unsigned delay;
 
-	IRDA_DEBUG(2, "%s(), <%ld>\n", __FUNCTION__, jiffies);
+	IRDA_DEBUG(2, "%s(), <%ld>\n", __func__, jiffies);
 
 	do {
 		IRDA_DEBUG(3, "%s - state=0x%04x / substate=0x%04x\n",
-			__FUNCTION__, fsm->state, fsm->substate);
+			__func__, fsm->state, fsm->substate);
 
 		next_state = fsm->state;
 		delay = 0;
@@ -249,12 +249,12 @@ static void sirdev_config_fsm(struct work_struct *work)
 			break;
 
 		default:
-			IRDA_ERROR("%s - undefined state\n", __FUNCTION__);
+			IRDA_ERROR("%s - undefined state\n", __func__);
 			fsm->result = -EINVAL;
 			/* fall thru */
 
 		case SIRDEV_STATE_ERROR:
-			IRDA_ERROR("%s - error: %d\n", __FUNCTION__, fsm->result);
+			IRDA_ERROR("%s - error: %d\n", __func__, fsm->result);
 
 #if 0	/* don't enable this before we have netdev->tx_timeout to recover */
 			netif_stop_queue(dev->netdev);
@@ -284,11 +284,12 @@ int sirdev_schedule_request(struct sir_dev *dev, int initial_state, unsigned par
 {
 	struct sir_fsm *fsm = &dev->fsm;
 
-	IRDA_DEBUG(2, "%s - state=0x%04x / param=%u\n", __FUNCTION__, initial_state, param);
+	IRDA_DEBUG(2, "%s - state=0x%04x / param=%u\n", __func__,
+			initial_state, param);
 
 	if (down_trylock(&fsm->sem)) {
 		if (in_interrupt()  ||  in_atomic()  ||  irqs_disabled()) {
-			IRDA_DEBUG(1, "%s(), state machine busy!\n", __FUNCTION__);
+			IRDA_DEBUG(1, "%s(), state machine busy!\n", __func__);
 			return -EWOULDBLOCK;
 		} else
 			down(&fsm->sem);
@@ -296,7 +297,7 @@ int sirdev_schedule_request(struct sir_dev *dev, int initial_state, unsigned par
 
 	if (fsm->state == SIRDEV_STATE_DEAD) {
 		/* race with sirdev_close should never happen */
-		IRDA_ERROR("%s(), instance staled!\n", __FUNCTION__);
+		IRDA_ERROR("%s(), instance staled!\n", __func__);
 		up(&fsm->sem);
 		return -ESTALE;		/* or better EPIPE? */
 	}
@@ -341,7 +342,7 @@ int sirdev_set_dongle(struct sir_dev *dev, IRDA_DONGLE type)
 {
 	int err;
 
-	IRDA_DEBUG(3, "%s : requesting dongle %d.\n", __FUNCTION__, type);
+	IRDA_DEBUG(3, "%s : requesting dongle %d.\n", __func__, type);
 
 	err = sirdev_schedule_dongle_open(dev, type);
 	if (unlikely(err))
@@ -376,7 +377,7 @@ int sirdev_raw_write(struct sir_dev *dev, const char *buf, int len)
 
 	ret = dev->drv->do_write(dev, dev->tx_buff.data, dev->tx_buff.len);
 	if (ret > 0) {
-		IRDA_DEBUG(3, "%s(), raw-tx started\n", __FUNCTION__);
+		IRDA_DEBUG(3, "%s(), raw-tx started\n", __func__);
 
 		dev->tx_buff.data += ret;
 		dev->tx_buff.len -= ret;
@@ -437,7 +438,7 @@ void sirdev_write_complete(struct sir_dev *dev)
 	spin_lock_irqsave(&dev->tx_lock, flags);
 
 	IRDA_DEBUG(3, "%s() - dev->tx_buff.len = %d\n",
-		   __FUNCTION__, dev->tx_buff.len);
+		   __func__, dev->tx_buff.len);
 
 	if (likely(dev->tx_buff.len > 0))  {
 		/* Write data left in transmit buffer */
@@ -450,7 +451,7 @@ void sirdev_write_complete(struct sir_dev *dev)
 		else if (unlikely(actual<0)) {
 			/* could be dropped later when we have tx_timeout to recover */
 			IRDA_ERROR("%s: drv->do_write failed (%d)\n",
-				   __FUNCTION__, actual);
+				   __func__, actual);
 			if ((skb=dev->tx_skb) != NULL) {
 				dev->tx_skb = NULL;
 				dev_kfree_skb_any(skb);
@@ -471,7 +472,7 @@ void sirdev_write_complete(struct sir_dev *dev)
 		 * restarted when the irda-thread has completed the request.
 		 */
 
-		IRDA_DEBUG(3, "%s(), raw-tx done\n", __FUNCTION__);
+		IRDA_DEBUG(3, "%s(), raw-tx done\n", __func__);
 		dev->raw_tx = 0;
 		goto done;	/* no post-frame handling in raw mode */
 	}
@@ -488,7 +489,7 @@ void sirdev_write_complete(struct sir_dev *dev)
 	 * re-activated.
 	 */
 
-	IRDA_DEBUG(5, "%s(), finished with frame!\n", __FUNCTION__);
+	IRDA_DEBUG(5, "%s(), finished with frame!\n", __func__);
 		
 	if ((skb=dev->tx_skb) != NULL) {
 		dev->tx_skb = NULL;
@@ -498,14 +499,14 @@ void sirdev_write_complete(struct sir_dev *dev)
 	}
 
 	if (unlikely(dev->new_speed > 0)) {
-		IRDA_DEBUG(5, "%s(), Changing speed!\n", __FUNCTION__);
+		IRDA_DEBUG(5, "%s(), Changing speed!\n", __func__);
 		err = sirdev_schedule_speed(dev, dev->new_speed);
 		if (unlikely(err)) {
 			/* should never happen
 			 * forget the speed change and hope the stack recovers
 			 */
 			IRDA_ERROR("%s - schedule speed change failed: %d\n",
-				   __FUNCTION__, err);
+				   __func__, err);
 			netif_wake_queue(dev->netdev);
 		}
 		/* else: success
@@ -532,13 +533,13 @@ EXPORT_SYMBOL(sirdev_write_complete);
 int sirdev_receive(struct sir_dev *dev, const unsigned char *cp, size_t count) 
 {
 	if (!dev || !dev->netdev) {
-		IRDA_WARNING("%s(), not ready yet!\n", __FUNCTION__);
+		IRDA_WARNING("%s(), not ready yet!\n", __func__);
 		return -1;
 	}
 
 	if (!dev->irlap) {
 		IRDA_WARNING("%s - too early: %p / %zd!\n",
-			     __FUNCTION__, cp, count);
+			     __func__, cp, count);
 		return -1;
 	}
 
@@ -548,7 +549,7 @@ int sirdev_receive(struct sir_dev *dev, const unsigned char *cp, size_t count)
 		 */
 		irda_device_set_media_busy(dev->netdev, TRUE);
 		dev->stats.rx_dropped++;
-		IRDA_DEBUG(0, "%s; rx-drop: %zd\n", __FUNCTION__, count);
+		IRDA_DEBUG(0, "%s; rx-drop: %zd\n", __func__, count);
 		return 0;
 	}
 
@@ -600,7 +601,7 @@ static int sirdev_hard_xmit(struct sk_buff *skb, struct net_device *ndev)
 
 	netif_stop_queue(ndev);
 
-	IRDA_DEBUG(3, "%s(), skb->len = %d\n", __FUNCTION__, skb->len);
+	IRDA_DEBUG(3, "%s(), skb->len = %d\n", __func__, skb->len);
 
 	speed = irda_get_next_speed(skb);
 	if ((speed != dev->speed) && (speed != -1)) {
@@ -637,7 +638,7 @@ static int sirdev_hard_xmit(struct sk_buff *skb, struct net_device *ndev)
 
 	/* Check problems */
 	if(spin_is_locked(&dev->tx_lock)) {
-		IRDA_DEBUG(3, "%s(), write not completed\n", __FUNCTION__);
+		IRDA_DEBUG(3, "%s(), write not completed\n", __func__);
 	}
 
 	/* serialize with write completion */
@@ -666,7 +667,7 @@ static int sirdev_hard_xmit(struct sk_buff *skb, struct net_device *ndev)
 	else if (unlikely(actual < 0)) {
 		/* could be dropped later when we have tx_timeout to recover */
 		IRDA_ERROR("%s: drv->do_write failed (%d)\n",
-			   __FUNCTION__, actual);
+			   __func__, actual);
 		dev_kfree_skb_any(skb);
 		dev->stats.tx_errors++;		      
 		dev->stats.tx_dropped++;		      
@@ -687,7 +688,7 @@ static int sirdev_ioctl(struct net_device *ndev, struct ifreq *rq, int cmd)
 
 	IRDA_ASSERT(dev != NULL, return -1;);
 
-	IRDA_DEBUG(3, "%s(), %s, (cmd=0x%X)\n", __FUNCTION__, ndev->name, cmd);
+	IRDA_DEBUG(3, "%s(), %s, (cmd=0x%X)\n", __func__, ndev->name, cmd);
 	
 	switch (cmd) {
 	case SIOCSBANDWIDTH: /* Set bandwidth */
@@ -804,7 +805,7 @@ static int sirdev_open(struct net_device *ndev)
 	if (!try_module_get(drv->owner))
 		return -ESTALE;
 
-	IRDA_DEBUG(2, "%s()\n", __FUNCTION__);
+	IRDA_DEBUG(2, "%s()\n", __func__);
 
 	if (sirdev_alloc_buffers(dev))
 		goto errout_dec;
@@ -822,7 +823,7 @@ static int sirdev_open(struct net_device *ndev)
 
 	netif_wake_queue(ndev);
 
-	IRDA_DEBUG(2, "%s - done, speed = %d\n", __FUNCTION__, dev->speed);
+	IRDA_DEBUG(2, "%s - done, speed = %d\n", __func__, dev->speed);
 
 	return 0;
 
@@ -842,7 +843,7 @@ static int sirdev_close(struct net_device *ndev)
 	struct sir_dev *dev = ndev->priv;
 	const struct sir_driver *drv;
 
-//	IRDA_DEBUG(0, "%s\n", __FUNCTION__);
+//	IRDA_DEBUG(0, "%s\n", __func__);
 
 	netif_stop_queue(ndev);
 
@@ -878,7 +879,7 @@ struct sir_dev * sirdev_get_instance(const struct sir_driver *drv, const char *n
 	struct net_device *ndev;
 	struct sir_dev *dev;
 
-	IRDA_DEBUG(0, "%s - %s\n", __FUNCTION__, name);
+	IRDA_DEBUG(0, "%s - %s\n", __func__, name);
 
 	/* instead of adding tests to protect against drv->do_write==NULL
 	 * at several places we refuse to create a sir_dev instance for
@@ -892,7 +893,7 @@ struct sir_dev * sirdev_get_instance(const struct sir_driver *drv, const char *n
 	 */
 	ndev = alloc_irdadev(sizeof(*dev));
 	if (ndev == NULL) {
-		IRDA_ERROR("%s - Can't allocate memory for IrDA control block!\n", __FUNCTION__);
+		IRDA_ERROR("%s - Can't allocate memory for IrDA control block!\n", __func__);
 		goto out;
 	}
 	dev = ndev->priv;
@@ -921,7 +922,7 @@ struct sir_dev * sirdev_get_instance(const struct sir_driver *drv, const char *n
 	ndev->do_ioctl = sirdev_ioctl;
 
 	if (register_netdev(ndev)) {
-		IRDA_ERROR("%s(), register_netdev() failed!\n", __FUNCTION__);
+		IRDA_ERROR("%s(), register_netdev() failed!\n", __func__);
 		goto out_freenetdev;
 	}
 
@@ -938,7 +939,7 @@ int sirdev_put_instance(struct sir_dev *dev)
 {
 	int err = 0;
 
-	IRDA_DEBUG(0, "%s\n", __FUNCTION__);
+	IRDA_DEBUG(0, "%s\n", __func__);
 
 	atomic_set(&dev->enable_rx, 0);
 
@@ -948,7 +949,7 @@ int sirdev_put_instance(struct sir_dev *dev)
 	if (dev->dongle_drv)
 		err = sirdev_schedule_dongle_close(dev);
 	if (err)
-		IRDA_ERROR("%s - error %d\n", __FUNCTION__, err);
+		IRDA_ERROR("%s - error %d\n", __func__, err);
 
 	sirdev_close(dev->netdev);
 
diff --git a/drivers/net/irda/sir_dongle.c b/drivers/net/irda/sir_dongle.c
index 25d5b8a96bdc..36030241f7a9 100644
--- a/drivers/net/irda/sir_dongle.c
+++ b/drivers/net/irda/sir_dongle.c
@@ -36,7 +36,7 @@ int irda_register_dongle(struct dongle_driver *new)
 	struct dongle_driver *drv;
 
 	IRDA_DEBUG(0, "%s : registering dongle \"%s\" (%d).\n",
-		   __FUNCTION__, new->driver_name, new->type);
+		   __func__, new->driver_name, new->type);
 
 	mutex_lock(&dongle_list_lock);
 	list_for_each(entry, &dongle_list) {
diff --git a/drivers/net/irda/smsc-ircc2.c b/drivers/net/irda/smsc-ircc2.c
index 78dc8e7837f0..b5360fe99d3a 100644
--- a/drivers/net/irda/smsc-ircc2.c
+++ b/drivers/net/irda/smsc-ircc2.c
@@ -460,7 +460,7 @@ static int __init smsc_ircc_init(void)
 {
 	int ret;
 
-	IRDA_DEBUG(1, "%s\n", __FUNCTION__);
+	IRDA_DEBUG(1, "%s\n", __func__);
 
 	ret = platform_driver_register(&smsc_ircc_driver);
 	if (ret) {
@@ -500,7 +500,7 @@ static int __init smsc_ircc_open(unsigned int fir_base, unsigned int sir_base, u
 	struct net_device *dev;
 	int err;
 
-	IRDA_DEBUG(1, "%s\n", __FUNCTION__);
+	IRDA_DEBUG(1, "%s\n", __func__);
 
 	err = smsc_ircc_present(fir_base, sir_base);
 	if (err)
@@ -508,7 +508,7 @@ static int __init smsc_ircc_open(unsigned int fir_base, unsigned int sir_base, u
 
 	err = -ENOMEM;
 	if (dev_count >= ARRAY_SIZE(dev_self)) {
-	        IRDA_WARNING("%s(), too many devices!\n", __FUNCTION__);
+	        IRDA_WARNING("%s(), too many devices!\n", __func__);
 		goto err_out1;
 	}
 
@@ -517,7 +517,7 @@ static int __init smsc_ircc_open(unsigned int fir_base, unsigned int sir_base, u
 	 */
 	dev = alloc_irdadev(sizeof(struct smsc_ircc_cb));
 	if (!dev) {
-		IRDA_WARNING("%s() can't allocate net device\n", __FUNCTION__);
+		IRDA_WARNING("%s() can't allocate net device\n", __func__);
 		goto err_out1;
 	}
 
@@ -633,14 +633,14 @@ static int smsc_ircc_present(unsigned int fir_base, unsigned int sir_base)
 	if (!request_region(fir_base, SMSC_IRCC2_FIR_CHIP_IO_EXTENT,
 			    driver_name)) {
 		IRDA_WARNING("%s: can't get fir_base of 0x%03x\n",
-			     __FUNCTION__, fir_base);
+			     __func__, fir_base);
 		goto out1;
 	}
 
 	if (!request_region(sir_base, SMSC_IRCC2_SIR_CHIP_IO_EXTENT,
 			    driver_name)) {
 		IRDA_WARNING("%s: can't get sir_base of 0x%03x\n",
-			     __FUNCTION__, sir_base);
+			     __func__, sir_base);
 		goto out2;
 	}
 
@@ -656,7 +656,7 @@ static int smsc_ircc_present(unsigned int fir_base, unsigned int sir_base)
 
 	if (high != 0x10 || low != 0xb8 || (chip != 0xf1 && chip != 0xf2)) {
 		IRDA_WARNING("%s(), addr 0x%04x - no device found!\n",
-			     __FUNCTION__, fir_base);
+			     __func__, fir_base);
 		goto out3;
 	}
 	IRDA_MESSAGE("SMsC IrDA Controller found\n IrCC version %d.%d, "
@@ -793,7 +793,7 @@ static int smsc_ircc_net_ioctl(struct net_device *dev, struct ifreq *rq, int cmd
 
 	IRDA_ASSERT(self != NULL, return -1;);
 
-	IRDA_DEBUG(2, "%s(), %s, (cmd=0x%X)\n", __FUNCTION__, dev->name, cmd);
+	IRDA_DEBUG(2, "%s(), %s, (cmd=0x%X)\n", __func__, dev->name, cmd);
 
 	switch (cmd) {
 	case SIOCSBANDWIDTH: /* Set bandwidth */
@@ -878,7 +878,7 @@ int smsc_ircc_hard_xmit_sir(struct sk_buff *skb, struct net_device *dev)
 	unsigned long flags;
 	s32 speed;
 
-	IRDA_DEBUG(1, "%s\n", __FUNCTION__);
+	IRDA_DEBUG(1, "%s\n", __func__);
 
 	IRDA_ASSERT(dev != NULL, return 0;);
 
@@ -953,21 +953,21 @@ static void smsc_ircc_set_fir_speed(struct smsc_ircc_cb *self, u32 speed)
 		ir_mode = IRCC_CFGA_IRDA_HDLC;
 		ctrl = IRCC_CRC;
 		fast = 0;
-		IRDA_DEBUG(0, "%s(), handling baud of 576000\n", __FUNCTION__);
+		IRDA_DEBUG(0, "%s(), handling baud of 576000\n", __func__);
 		break;
 	case 1152000:
 		ir_mode = IRCC_CFGA_IRDA_HDLC;
 		ctrl = IRCC_1152 | IRCC_CRC;
 		fast = IRCC_LCR_A_FAST | IRCC_LCR_A_GP_DATA;
 		IRDA_DEBUG(0, "%s(), handling baud of 1152000\n",
-			   __FUNCTION__);
+			   __func__);
 		break;
 	case 4000000:
 		ir_mode = IRCC_CFGA_IRDA_4PPM;
 		ctrl = IRCC_CRC;
 		fast = IRCC_LCR_A_FAST;
 		IRDA_DEBUG(0, "%s(), handling baud of 4000000\n",
-			   __FUNCTION__);
+			   __func__);
 		break;
 	}
 	#if 0
@@ -995,7 +995,7 @@ static void smsc_ircc_fir_start(struct smsc_ircc_cb *self)
 	struct net_device *dev;
 	int fir_base;
 
-	IRDA_DEBUG(1, "%s\n", __FUNCTION__);
+	IRDA_DEBUG(1, "%s\n", __func__);
 
 	IRDA_ASSERT(self != NULL, return;);
 	dev = self->netdev;
@@ -1043,7 +1043,7 @@ static void smsc_ircc_fir_stop(struct smsc_ircc_cb *self)
 {
 	int fir_base;
 
-	IRDA_DEBUG(1, "%s\n", __FUNCTION__);
+	IRDA_DEBUG(1, "%s\n", __func__);
 
 	IRDA_ASSERT(self != NULL, return;);
 
@@ -1067,7 +1067,7 @@ static void smsc_ircc_change_speed(struct smsc_ircc_cb *self, u32 speed)
 	struct net_device *dev;
 	int last_speed_was_sir;
 
-	IRDA_DEBUG(0, "%s() changing speed to: %d\n", __FUNCTION__, speed);
+	IRDA_DEBUG(0, "%s() changing speed to: %d\n", __func__, speed);
 
 	IRDA_ASSERT(self != NULL, return;);
 	dev = self->netdev;
@@ -1135,7 +1135,7 @@ void smsc_ircc_set_sir_speed(struct smsc_ircc_cb *self, __u32 speed)
 	int lcr;    /* Line control reg */
 	int divisor;
 
-	IRDA_DEBUG(0, "%s(), Setting speed to: %d\n", __FUNCTION__, speed);
+	IRDA_DEBUG(0, "%s(), Setting speed to: %d\n", __func__, speed);
 
 	IRDA_ASSERT(self != NULL, return;);
 	iobase = self->io.sir_base;
@@ -1170,7 +1170,7 @@ void smsc_ircc_set_sir_speed(struct smsc_ircc_cb *self, __u32 speed)
 	/* Turn on interrups */
 	outb(UART_IER_RLSI | UART_IER_RDI | UART_IER_THRI, iobase + UART_IER);
 
-	IRDA_DEBUG(2, "%s() speed changed to: %d\n", __FUNCTION__, speed);
+	IRDA_DEBUG(2, "%s() speed changed to: %d\n", __func__, speed);
 }
 
 
@@ -1253,7 +1253,7 @@ static void smsc_ircc_dma_xmit(struct smsc_ircc_cb *self, int bofs)
 	int iobase = self->io.fir_base;
 	u8 ctrl;
 
-	IRDA_DEBUG(3, "%s\n", __FUNCTION__);
+	IRDA_DEBUG(3, "%s\n", __func__);
 #if 1
 	/* Disable Rx */
 	register_bank(iobase, 0);
@@ -1307,7 +1307,7 @@ static void smsc_ircc_dma_xmit_complete(struct smsc_ircc_cb *self)
 {
 	int iobase = self->io.fir_base;
 
-	IRDA_DEBUG(3, "%s\n", __FUNCTION__);
+	IRDA_DEBUG(3, "%s\n", __func__);
 #if 0
 	/* Disable Tx */
 	register_bank(iobase, 0);
@@ -1411,7 +1411,7 @@ static void smsc_ircc_dma_receive_complete(struct smsc_ircc_cb *self)
 
 	register_bank(iobase, 0);
 
-	IRDA_DEBUG(3, "%s\n", __FUNCTION__);
+	IRDA_DEBUG(3, "%s\n", __func__);
 #if 0
 	/* Disable Rx */
 	register_bank(iobase, 0);
@@ -1422,7 +1422,7 @@ static void smsc_ircc_dma_receive_complete(struct smsc_ircc_cb *self)
 	lsr= inb(iobase + IRCC_LSR);
 	msgcnt = inb(iobase + IRCC_LCR_B) & 0x08;
 
-	IRDA_DEBUG(2, "%s: dma count = %d\n", __FUNCTION__,
+	IRDA_DEBUG(2, "%s: dma count = %d\n", __func__,
 		   get_dma_residue(self->io.dma));
 
 	len = self->rx_buff.truesize - get_dma_residue(self->io.dma);
@@ -1445,15 +1445,15 @@ static void smsc_ircc_dma_receive_complete(struct smsc_ircc_cb *self)
 	len -= self->io.speed < 4000000 ? 2 : 4;
 
 	if (len < 2 || len > 2050) {
-		IRDA_WARNING("%s(), bogus len=%d\n", __FUNCTION__, len);
+		IRDA_WARNING("%s(), bogus len=%d\n", __func__, len);
 		return;
 	}
-	IRDA_DEBUG(2, "%s: msgcnt = %d, len=%d\n", __FUNCTION__, msgcnt, len);
+	IRDA_DEBUG(2, "%s: msgcnt = %d, len=%d\n", __func__, msgcnt, len);
 
 	skb = dev_alloc_skb(len + 1);
 	if (!skb) {
 		IRDA_WARNING("%s(), memory squeeze, dropping frame.\n",
-			     __FUNCTION__);
+			     __func__);
 		return;
 	}
 	/* Make sure IP header gets aligned */
@@ -1494,7 +1494,7 @@ static void smsc_ircc_sir_receive(struct smsc_ircc_cb *self)
 
 		/* Make sure we don't stay here to long */
 		if (boguscount++ > 32) {
-			IRDA_DEBUG(2, "%s(), breaking!\n", __FUNCTION__);
+			IRDA_DEBUG(2, "%s(), breaking!\n", __func__);
 			break;
 		}
 	} while (inb(iobase + UART_LSR) & UART_LSR_DR);
@@ -1536,7 +1536,7 @@ static irqreturn_t smsc_ircc_interrupt(int dummy, void *dev_id)
 	lcra = inb(iobase + IRCC_LCR_A);
 	lsr = inb(iobase + IRCC_LSR);
 
-	IRDA_DEBUG(2, "%s(), iir = 0x%02x\n", __FUNCTION__, iir);
+	IRDA_DEBUG(2, "%s(), iir = 0x%02x\n", __func__, iir);
 
 	if (iir & IRCC_IIR_EOM) {
 		if (self->io.direction == IO_RECV)
@@ -1548,7 +1548,7 @@ static irqreturn_t smsc_ircc_interrupt(int dummy, void *dev_id)
 	}
 
 	if (iir & IRCC_IIR_ACTIVE_FRAME) {
-		/*printk(KERN_WARNING "%s(): Active Frame\n", __FUNCTION__);*/
+		/*printk(KERN_WARNING "%s(): Active Frame\n", __func__);*/
 	}
 
 	/* Enable interrupts again */
@@ -1587,11 +1587,11 @@ static irqreturn_t smsc_ircc_interrupt_sir(struct net_device *dev)
 		lsr = inb(iobase + UART_LSR);
 
 		IRDA_DEBUG(4, "%s(), iir=%02x, lsr=%02x, iobase=%#x\n",
-			    __FUNCTION__, iir, lsr, iobase);
+			    __func__, iir, lsr, iobase);
 
 		switch (iir) {
 		case UART_IIR_RLSI:
-			IRDA_DEBUG(2, "%s(), RLSI\n", __FUNCTION__);
+			IRDA_DEBUG(2, "%s(), RLSI\n", __func__);
 			break;
 		case UART_IIR_RDI:
 			/* Receive interrupt */
@@ -1604,7 +1604,7 @@ static irqreturn_t smsc_ircc_interrupt_sir(struct net_device *dev)
 			break;
 		default:
 			IRDA_DEBUG(0, "%s(), unhandled IIR=%#x\n",
-				   __FUNCTION__, iir);
+				   __func__, iir);
 			break;
 		}
 
@@ -1631,11 +1631,11 @@ static int ircc_is_receiving(struct smsc_ircc_cb *self)
 	int status = FALSE;
 	/* int iobase; */
 
-	IRDA_DEBUG(1, "%s\n", __FUNCTION__);
+	IRDA_DEBUG(1, "%s\n", __func__);
 
 	IRDA_ASSERT(self != NULL, return FALSE;);
 
-	IRDA_DEBUG(0, "%s: dma count = %d\n", __FUNCTION__,
+	IRDA_DEBUG(0, "%s: dma count = %d\n", __func__,
 		   get_dma_residue(self->io.dma));
 
 	status = (self->rx_buff.state != OUTSIDE_FRAME);
@@ -1652,7 +1652,7 @@ static int smsc_ircc_request_irq(struct smsc_ircc_cb *self)
 			    self->netdev->name, self->netdev);
 	if (error)
 		IRDA_DEBUG(0, "%s(), unable to allocate irq=%d, err=%d\n",
-			   __FUNCTION__, self->io.irq, error);
+			   __func__, self->io.irq, error);
 
 	return error;
 }
@@ -1696,21 +1696,21 @@ static int smsc_ircc_net_open(struct net_device *dev)
 	struct smsc_ircc_cb *self;
 	char hwname[16];
 
-	IRDA_DEBUG(1, "%s\n", __FUNCTION__);
+	IRDA_DEBUG(1, "%s\n", __func__);
 
 	IRDA_ASSERT(dev != NULL, return -1;);
 	self = netdev_priv(dev);
 	IRDA_ASSERT(self != NULL, return 0;);
 
 	if (self->io.suspended) {
-		IRDA_DEBUG(0, "%s(), device is suspended\n", __FUNCTION__);
+		IRDA_DEBUG(0, "%s(), device is suspended\n", __func__);
 		return -EAGAIN;
 	}
 
 	if (request_irq(self->io.irq, smsc_ircc_interrupt, 0, dev->name,
 			(void *) dev)) {
 		IRDA_DEBUG(0, "%s(), unable to allocate irq=%d\n",
-			   __FUNCTION__, self->io.irq);
+			   __func__, self->io.irq);
 		return -EAGAIN;
 	}
 
@@ -1734,7 +1734,7 @@ static int smsc_ircc_net_open(struct net_device *dev)
 		smsc_ircc_net_close(dev);
 
 		IRDA_WARNING("%s(), unable to allocate DMA=%d\n",
-			     __FUNCTION__, self->io.dma);
+			     __func__, self->io.dma);
 		return -EAGAIN;
 	}
 
@@ -1753,7 +1753,7 @@ static int smsc_ircc_net_close(struct net_device *dev)
 {
 	struct smsc_ircc_cb *self;
 
-	IRDA_DEBUG(1, "%s\n", __FUNCTION__);
+	IRDA_DEBUG(1, "%s\n", __func__);
 
 	IRDA_ASSERT(dev != NULL, return -1;);
 	self = netdev_priv(dev);
@@ -1836,7 +1836,7 @@ static int smsc_ircc_resume(struct platform_device *dev)
  */
 static int __exit smsc_ircc_close(struct smsc_ircc_cb *self)
 {
-	IRDA_DEBUG(1, "%s\n", __FUNCTION__);
+	IRDA_DEBUG(1, "%s\n", __func__);
 
 	IRDA_ASSERT(self != NULL, return -1;);
 
@@ -1848,12 +1848,12 @@ static int __exit smsc_ircc_close(struct smsc_ircc_cb *self)
 	smsc_ircc_stop_interrupts(self);
 
 	/* Release the PORTS that this driver is using */
-	IRDA_DEBUG(0, "%s(), releasing 0x%03x\n",  __FUNCTION__,
+	IRDA_DEBUG(0, "%s(), releasing 0x%03x\n",  __func__,
 		   self->io.fir_base);
 
 	release_region(self->io.fir_base, self->io.fir_ext);
 
-	IRDA_DEBUG(0, "%s(), releasing 0x%03x\n", __FUNCTION__,
+	IRDA_DEBUG(0, "%s(), releasing 0x%03x\n", __func__,
 		   self->io.sir_base);
 
 	release_region(self->io.sir_base, self->io.sir_ext);
@@ -1875,7 +1875,7 @@ static void __exit smsc_ircc_cleanup(void)
 {
 	int i;
 
-	IRDA_DEBUG(1, "%s\n", __FUNCTION__);
+	IRDA_DEBUG(1, "%s\n", __func__);
 
 	for (i = 0; i < 2; i++) {
 		if (dev_self[i])
@@ -1899,7 +1899,7 @@ void smsc_ircc_sir_start(struct smsc_ircc_cb *self)
 	struct net_device *dev;
 	int fir_base, sir_base;
 
-	IRDA_DEBUG(3, "%s\n", __FUNCTION__);
+	IRDA_DEBUG(3, "%s\n", __func__);
 
 	IRDA_ASSERT(self != NULL, return;);
 	dev = self->netdev;
@@ -1926,7 +1926,7 @@ void smsc_ircc_sir_start(struct smsc_ircc_cb *self)
 	/* Turn on interrups */
 	outb(UART_IER_RLSI | UART_IER_RDI |UART_IER_THRI, sir_base + UART_IER);
 
-	IRDA_DEBUG(3, "%s() - exit\n", __FUNCTION__);
+	IRDA_DEBUG(3, "%s() - exit\n", __func__);
 
 	outb(0x00, fir_base + IRCC_MASTER);
 }
@@ -1936,7 +1936,7 @@ void smsc_ircc_sir_stop(struct smsc_ircc_cb *self)
 {
 	int iobase;
 
-	IRDA_DEBUG(3, "%s\n", __FUNCTION__);
+	IRDA_DEBUG(3, "%s\n", __func__);
 	iobase = self->io.sir_base;
 
 	/* Reset UART */
@@ -1962,7 +1962,7 @@ static void smsc_ircc_sir_write_wakeup(struct smsc_ircc_cb *self)
 
 	IRDA_ASSERT(self != NULL, return;);
 
-	IRDA_DEBUG(4, "%s\n", __FUNCTION__);
+	IRDA_DEBUG(4, "%s\n", __func__);
 
 	iobase = self->io.sir_base;
 
@@ -1984,7 +1984,7 @@ static void smsc_ircc_sir_write_wakeup(struct smsc_ircc_cb *self)
 		 */
 		if (self->new_speed) {
 			IRDA_DEBUG(5, "%s(), Changing speed to %d.\n",
-				   __FUNCTION__, self->new_speed);
+				   __func__, self->new_speed);
 			smsc_ircc_sir_wait_hw_transmitter_finish(self);
 			smsc_ircc_change_speed(self, self->new_speed);
 			self->new_speed = 0;
@@ -2023,7 +2023,7 @@ static int smsc_ircc_sir_write(int iobase, int fifo_size, __u8 *buf, int len)
 
 	/* Tx FIFO should be empty! */
 	if (!(inb(iobase + UART_LSR) & UART_LSR_THRE)) {
-		IRDA_WARNING("%s(), failed, fifo not empty!\n", __FUNCTION__);
+		IRDA_WARNING("%s(), failed, fifo not empty!\n", __func__);
 		return 0;
 	}
 
@@ -2123,7 +2123,7 @@ static void smsc_ircc_sir_wait_hw_transmitter_finish(struct smsc_ircc_cb *self)
 		udelay(1);
 
 	if (count == 0)
-		IRDA_DEBUG(0, "%s(): stuck transmitter\n", __FUNCTION__);
+		IRDA_DEBUG(0, "%s(): stuck transmitter\n", __func__);
 }
 
 
@@ -2145,7 +2145,7 @@ static int __init smsc_ircc_look_for_chips(void)
 	while (address->cfg_base) {
 		cfg_base = address->cfg_base;
 
-		/*printk(KERN_WARNING "%s(): probing: 0x%02x for: 0x%02x\n", __FUNCTION__, cfg_base, address->type);*/
+		/*printk(KERN_WARNING "%s(): probing: 0x%02x for: 0x%02x\n", __func__, cfg_base, address->type);*/
 
 		if (address->type & SMSCSIO_TYPE_FDC) {
 			type = "FDC";
@@ -2184,7 +2184,7 @@ static int __init smsc_superio_flat(const struct smsc_chip *chips, unsigned shor
 	u8 mode, dma, irq;
 	int ret = -ENODEV;
 
-	IRDA_DEBUG(1, "%s\n", __FUNCTION__);
+	IRDA_DEBUG(1, "%s\n", __func__);
 
 	if (smsc_ircc_probe(cfgbase, SMSCSIOFLAT_DEVICEID_REG, chips, type) == NULL)
 		return ret;
@@ -2192,10 +2192,10 @@ static int __init smsc_superio_flat(const struct smsc_chip *chips, unsigned shor
 	outb(SMSCSIOFLAT_UARTMODE0C_REG, cfgbase);
 	mode = inb(cfgbase + 1);
 
-	/*printk(KERN_WARNING "%s(): mode: 0x%02x\n", __FUNCTION__, mode);*/
+	/*printk(KERN_WARNING "%s(): mode: 0x%02x\n", __func__, mode);*/
 
 	if (!(mode & SMSCSIOFLAT_UART2MODE_VAL_IRDA))
-		IRDA_WARNING("%s(): IrDA not enabled\n", __FUNCTION__);
+		IRDA_WARNING("%s(): IrDA not enabled\n", __func__);
 
 	outb(SMSCSIOFLAT_UART2BASEADDR_REG, cfgbase);
 	sirbase = inb(cfgbase + 1) << 2;
@@ -2212,7 +2212,7 @@ static int __init smsc_superio_flat(const struct smsc_chip *chips, unsigned shor
 	outb(SMSCSIOFLAT_UARTIRQSELECT_REG, cfgbase);
 	irq = inb(cfgbase + 1) & SMSCSIOFLAT_UART2IRQSELECT_MASK;
 
-	IRDA_MESSAGE("%s(): fir: 0x%02x, sir: 0x%02x, dma: %02d, irq: %d, mode: 0x%02x\n", __FUNCTION__, firbase, sirbase, dma, irq, mode);
+	IRDA_MESSAGE("%s(): fir: 0x%02x, sir: 0x%02x, dma: %02d, irq: %d, mode: 0x%02x\n", __func__, firbase, sirbase, dma, irq, mode);
 
 	if (firbase && smsc_ircc_open(firbase, sirbase, dma, irq) == 0)
 		ret = 0;
@@ -2234,7 +2234,7 @@ static int __init smsc_superio_paged(const struct smsc_chip *chips, unsigned sho
 	unsigned short fir_io, sir_io;
 	int ret = -ENODEV;
 
-	IRDA_DEBUG(1, "%s\n", __FUNCTION__);
+	IRDA_DEBUG(1, "%s\n", __func__);
 
 	if (smsc_ircc_probe(cfg_base, 0x20, chips, type) == NULL)
 		return ret;
@@ -2268,7 +2268,7 @@ static int __init smsc_superio_paged(const struct smsc_chip *chips, unsigned sho
 
 static int __init smsc_access(unsigned short cfg_base, unsigned char reg)
 {
-	IRDA_DEBUG(1, "%s\n", __FUNCTION__);
+	IRDA_DEBUG(1, "%s\n", __func__);
 
 	outb(reg, cfg_base);
 	return inb(cfg_base) != reg ? -1 : 0;
@@ -2278,7 +2278,7 @@ static const struct smsc_chip * __init smsc_ircc_probe(unsigned short cfg_base,
 {
 	u8 devid, xdevid, rev;
 
-	IRDA_DEBUG(1, "%s\n", __FUNCTION__);
+	IRDA_DEBUG(1, "%s\n", __func__);
 
 	/* Leave configuration */
 
@@ -2353,7 +2353,7 @@ static int __init smsc_superio_fdc(unsigned short cfg_base)
 
 	if (!request_region(cfg_base, 2, driver_name)) {
 		IRDA_WARNING("%s: can't get cfg_base of 0x%03x\n",
-			     __FUNCTION__, cfg_base);
+			     __func__, cfg_base);
 	} else {
 		if (!smsc_superio_flat(fdc_chips_flat, cfg_base, "FDC") ||
 		    !smsc_superio_paged(fdc_chips_paged, cfg_base, "FDC"))
@@ -2371,7 +2371,7 @@ static int __init smsc_superio_lpc(unsigned short cfg_base)
 
 	if (!request_region(cfg_base, 2, driver_name)) {
 		IRDA_WARNING("%s: can't get cfg_base of 0x%03x\n",
-			     __FUNCTION__, cfg_base);
+			     __func__, cfg_base);
 	} else {
 		if (!smsc_superio_flat(lpc_chips_flat, cfg_base, "LPC") ||
 		    !smsc_superio_paged(lpc_chips_paged, cfg_base, "LPC"))
@@ -2932,7 +2932,7 @@ static void smsc_ircc_set_transceiver_smsc_ircc_atc(int fir_base, u32 speed)
 		/* empty */;
 
 	if (val)
-		IRDA_WARNING("%s(): ATC: 0x%02x\n", __FUNCTION__,
+		IRDA_WARNING("%s(): ATC: 0x%02x\n", __func__,
 			     inb(fir_base + IRCC_ATC));
 }
 
diff --git a/drivers/net/irda/tekram-sir.c b/drivers/net/irda/tekram-sir.c
index d1ce5ae6a172..048a15422844 100644
--- a/drivers/net/irda/tekram-sir.c
+++ b/drivers/net/irda/tekram-sir.c
@@ -77,7 +77,7 @@ static int tekram_open(struct sir_dev *dev)
 {
 	struct qos_info *qos = &dev->qos;
 
-	IRDA_DEBUG(2, "%s()\n", __FUNCTION__);
+	IRDA_DEBUG(2, "%s()\n", __func__);
 
 	sirdev_set_dtr_rts(dev, TRUE, TRUE);
 
@@ -92,7 +92,7 @@ static int tekram_open(struct sir_dev *dev)
 
 static int tekram_close(struct sir_dev *dev)
 {
-	IRDA_DEBUG(2, "%s()\n", __FUNCTION__);
+	IRDA_DEBUG(2, "%s()\n", __func__);
 
 	/* Power off dongle */
 	sirdev_set_dtr_rts(dev, FALSE, FALSE);
@@ -130,7 +130,7 @@ static int tekram_change_speed(struct sir_dev *dev, unsigned speed)
 	u8 byte;
 	static int ret = 0;
 	
-	IRDA_DEBUG(2, "%s()\n", __FUNCTION__);
+	IRDA_DEBUG(2, "%s()\n", __func__);
 
 	switch(state) {
 	case SIRDEV_STATE_DONGLE_SPEED:
@@ -179,7 +179,7 @@ static int tekram_change_speed(struct sir_dev *dev, unsigned speed)
 		break;
 
 	default:
-		IRDA_ERROR("%s - undefined state %d\n", __FUNCTION__, state);
+		IRDA_ERROR("%s - undefined state %d\n", __func__, state);
 		ret = -EINVAL;
 		break;
 	}
@@ -204,7 +204,7 @@ static int tekram_change_speed(struct sir_dev *dev, unsigned speed)
 
 static int tekram_reset(struct sir_dev *dev)
 {
-	IRDA_DEBUG(2, "%s()\n", __FUNCTION__);
+	IRDA_DEBUG(2, "%s()\n", __func__);
 
 	/* Clear DTR, Set RTS */
 	sirdev_set_dtr_rts(dev, FALSE, TRUE); 
diff --git a/drivers/net/irda/toim3232-sir.c b/drivers/net/irda/toim3232-sir.c
index aa1a9b0ed83e..fcf287b749db 100644
--- a/drivers/net/irda/toim3232-sir.c
+++ b/drivers/net/irda/toim3232-sir.c
@@ -181,7 +181,7 @@ static int toim3232_open(struct sir_dev *dev)
 {
 	struct qos_info *qos = &dev->qos;
 
-	IRDA_DEBUG(2, "%s()\n", __FUNCTION__);
+	IRDA_DEBUG(2, "%s()\n", __func__);
 
 	/* Pull the lines high to start with.
 	 *
@@ -209,7 +209,7 @@ static int toim3232_open(struct sir_dev *dev)
 
 static int toim3232_close(struct sir_dev *dev)
 {
-	IRDA_DEBUG(2, "%s()\n", __FUNCTION__);
+	IRDA_DEBUG(2, "%s()\n", __func__);
 
 	/* Power off dongle */
 	sirdev_set_dtr_rts(dev, FALSE, FALSE);
@@ -241,7 +241,7 @@ static int toim3232_change_speed(struct sir_dev *dev, unsigned speed)
 	u8 byte;
 	static int ret = 0;
 
-	IRDA_DEBUG(2, "%s()\n", __FUNCTION__);
+	IRDA_DEBUG(2, "%s()\n", __func__);
 
 	switch(state) {
 	case SIRDEV_STATE_DONGLE_SPEED:
@@ -299,7 +299,7 @@ static int toim3232_change_speed(struct sir_dev *dev, unsigned speed)
 		break;
 
 	default:
-		printk(KERN_ERR "%s - undefined state %d\n", __FUNCTION__, state);
+		printk(KERN_ERR "%s - undefined state %d\n", __func__, state);
 		ret = -EINVAL;
 		break;
 	}
@@ -344,7 +344,7 @@ static int toim3232_change_speed(struct sir_dev *dev, unsigned speed)
 
 static int toim3232_reset(struct sir_dev *dev)
 {
-	IRDA_DEBUG(2, "%s()\n", __FUNCTION__);
+	IRDA_DEBUG(2, "%s()\n", __func__);
 
 	/* Switch off both DTR and RTS to switch off dongle */
 	sirdev_set_dtr_rts(dev, FALSE, FALSE);
diff --git a/drivers/net/irda/via-ircc.c b/drivers/net/irda/via-ircc.c
index 04ad3573b159..84e609ea5fbb 100644
--- a/drivers/net/irda/via-ircc.c
+++ b/drivers/net/irda/via-ircc.c
@@ -152,12 +152,12 @@ static int __init via_ircc_init(void)
 {
 	int rc;
 
-	IRDA_DEBUG(3, "%s()\n", __FUNCTION__);
+	IRDA_DEBUG(3, "%s()\n", __func__);
 
 	rc = pci_register_driver(&via_driver);
 	if (rc < 0) {
 		IRDA_DEBUG(0, "%s(): error rc = %d, returning  -ENODEV...\n",
-			   __FUNCTION__, rc);
+			   __func__, rc);
 		return -ENODEV;
 	}
 	return 0;
@@ -170,11 +170,11 @@ static int __devinit via_init_one (struct pci_dev *pcidev, const struct pci_devi
 	u16 Chipset,FirDRQ1,FirDRQ0,FirIRQ,FirIOBase;
 	chipio_t info;
 
-	IRDA_DEBUG(2, "%s(): Device ID=(0X%X)\n", __FUNCTION__, id->device);
+	IRDA_DEBUG(2, "%s(): Device ID=(0X%X)\n", __func__, id->device);
 
 	rc = pci_enable_device (pcidev);
 	if (rc) {
-		IRDA_DEBUG(0, "%s(): error rc = %d\n", __FUNCTION__, rc);
+		IRDA_DEBUG(0, "%s(): error rc = %d\n", __func__, rc);
 		return -ENODEV;
 	}
 
@@ -185,7 +185,7 @@ static int __devinit via_init_one (struct pci_dev *pcidev, const struct pci_devi
 		Chipset=0x3076;
 
 	if (Chipset==0x3076) {
-		IRDA_DEBUG(2, "%s(): Chipset = 3076\n", __FUNCTION__);
+		IRDA_DEBUG(2, "%s(): Chipset = 3076\n", __func__);
 
 		WriteLPCReg(7,0x0c );
 		temp=ReadLPCReg(0x30);//check if BIOS Enable Fir
@@ -222,7 +222,7 @@ static int __devinit via_init_one (struct pci_dev *pcidev, const struct pci_devi
 		} else
 			rc = -ENODEV; //IR not turn on	 
 	} else { //Not VT1211
-		IRDA_DEBUG(2, "%s(): Chipset = 3096\n", __FUNCTION__);
+		IRDA_DEBUG(2, "%s(): Chipset = 3096\n", __func__);
 
 		pci_read_config_byte(pcidev,0x67,&bTmp);//check if BIOS Enable Fir
 		if((bTmp&0x01)==1) {  // BIOS enable FIR
@@ -262,7 +262,7 @@ static int __devinit via_init_one (struct pci_dev *pcidev, const struct pci_devi
 			rc = -ENODEV; //IR not turn on !!!!!
 	}//Not VT1211
 
-	IRDA_DEBUG(2, "%s(): End - rc = %d\n", __FUNCTION__, rc);
+	IRDA_DEBUG(2, "%s(): End - rc = %d\n", __func__, rc);
 	return rc;
 }
 
@@ -276,7 +276,7 @@ static void via_ircc_clean(void)
 {
 	int i;
 
-	IRDA_DEBUG(3, "%s()\n", __FUNCTION__);
+	IRDA_DEBUG(3, "%s()\n", __func__);
 
 	for (i=0; i < ARRAY_SIZE(dev_self); i++) {
 		if (dev_self[i])
@@ -286,7 +286,7 @@ static void via_ircc_clean(void)
 
 static void __devexit via_remove_one (struct pci_dev *pdev)
 {
-	IRDA_DEBUG(3, "%s()\n", __FUNCTION__);
+	IRDA_DEBUG(3, "%s()\n", __func__);
 
 	/* FIXME : This is ugly. We should use pci_get_drvdata(pdev);
 	 * to get our driver instance and call directly via_ircc_close().
@@ -301,7 +301,7 @@ static void __devexit via_remove_one (struct pci_dev *pdev)
 
 static void __exit via_ircc_cleanup(void)
 {
-	IRDA_DEBUG(3, "%s()\n", __FUNCTION__);
+	IRDA_DEBUG(3, "%s()\n", __func__);
 
 	/* FIXME : This should be redundant, as pci_unregister_driver()
 	 * should call via_remove_one() on each device.
@@ -324,7 +324,7 @@ static __devinit int via_ircc_open(int i, chipio_t * info, unsigned int id)
 	struct via_ircc_cb *self;
 	int err;
 
-	IRDA_DEBUG(3, "%s()\n", __FUNCTION__);
+	IRDA_DEBUG(3, "%s()\n", __func__);
 
 	if (i >= ARRAY_SIZE(dev_self))
 		return -ENOMEM;
@@ -360,7 +360,7 @@ static __devinit int via_ircc_open(int i, chipio_t * info, unsigned int id)
 	/* Reserve the ioports that we need */
 	if (!request_region(self->io.fir_base, self->io.fir_ext, driver_name)) {
 		IRDA_DEBUG(0, "%s(), can't get iobase of 0x%03x\n",
-			   __FUNCTION__, self->io.fir_base);
+			   __func__, self->io.fir_base);
 		err = -ENODEV;
 		goto err_out1;
 	}
@@ -471,7 +471,7 @@ static int via_ircc_close(struct via_ircc_cb *self)
 {
 	int iobase;
 
-	IRDA_DEBUG(3, "%s()\n", __FUNCTION__);
+	IRDA_DEBUG(3, "%s()\n", __func__);
 
 	IRDA_ASSERT(self != NULL, return -1;);
 
@@ -483,7 +483,7 @@ static int via_ircc_close(struct via_ircc_cb *self)
 
 	/* Release the PORT that this driver is using */
 	IRDA_DEBUG(2, "%s(), Releasing Region %03x\n",
-		   __FUNCTION__, self->io.fir_base);
+		   __func__, self->io.fir_base);
 	release_region(self->io.fir_base, self->io.fir_ext);
 	if (self->tx_buff.head)
 		dma_free_coherent(NULL, self->tx_buff.truesize,
@@ -509,7 +509,7 @@ static void via_hw_init(struct via_ircc_cb *self)
 {
 	int iobase = self->io.fir_base;
 
-	IRDA_DEBUG(3, "%s()\n", __FUNCTION__);
+	IRDA_DEBUG(3, "%s()\n", __func__);
 
 	SetMaxRxPacketSize(iobase, 0x0fff);	//set to max:4095
 	// FIFO Init
@@ -582,7 +582,7 @@ static void via_ircc_change_dongle_speed(int iobase, int speed,
 	speed = speed;
 
 	IRDA_DEBUG(1, "%s(): change_dongle_speed to %d for 0x%x, %d\n",
-		   __FUNCTION__, speed, iobase, dongle_id);
+		   __func__, speed, iobase, dongle_id);
 
 	switch (dongle_id) {
 
@@ -671,7 +671,7 @@ static void via_ircc_change_dongle_speed(int iobase, int speed,
 
 	case 0x11:		/* Temic TFDS4500 */
 
-		IRDA_DEBUG(2, "%s: Temic TFDS4500: One RX pin, TX normal, RX inverted.\n", __FUNCTION__);
+		IRDA_DEBUG(2, "%s: Temic TFDS4500: One RX pin, TX normal, RX inverted.\n", __func__);
 
 		UseOneRX(iobase, ON);	//use ONE RX....RX1
 		InvertTX(iobase, OFF);
@@ -689,7 +689,7 @@ static void via_ircc_change_dongle_speed(int iobase, int speed,
 			SlowIRRXLowActive(iobase, OFF);
 
 		} else{
-			IRDA_DEBUG(0, "%s: Warning: TFDS4500 not running in SIR mode !\n", __FUNCTION__);
+			IRDA_DEBUG(0, "%s: Warning: TFDS4500 not running in SIR mode !\n", __func__);
 		}
 		break;
 
@@ -707,7 +707,7 @@ static void via_ircc_change_dongle_speed(int iobase, int speed,
 
 	default:
 		IRDA_ERROR("%s: Error: dongle_id %d unsupported !\n",
-			   __FUNCTION__, dongle_id);
+			   __func__, dongle_id);
 	}
 }
 
@@ -726,7 +726,7 @@ static void via_ircc_change_speed(struct via_ircc_cb *self, __u32 speed)
 	iobase = self->io.fir_base;
 	/* Update accounting for new speed */
 	self->io.speed = speed;
-	IRDA_DEBUG(1, "%s: change_speed to %d bps.\n", __FUNCTION__, speed);
+	IRDA_DEBUG(1, "%s: change_speed to %d bps.\n", __func__, speed);
 
 	WriteReg(iobase, I_ST_CT_0, 0x0);
 
@@ -957,7 +957,7 @@ static int via_ircc_dma_xmit(struct via_ircc_cb *self, u16 iobase)
 			self->tx_buff.head) + self->tx_buff_dma,
 		       self->tx_fifo.queue[self->tx_fifo.ptr].len, DMA_TX_MODE);
 	IRDA_DEBUG(1, "%s: tx_fifo.ptr=%x,len=%x,tx_fifo.len=%x..\n",
-		   __FUNCTION__, self->tx_fifo.ptr,
+		   __func__, self->tx_fifo.ptr,
 		   self->tx_fifo.queue[self->tx_fifo.ptr].len,
 		   self->tx_fifo.len);
 
@@ -981,7 +981,7 @@ static int via_ircc_dma_xmit_complete(struct via_ircc_cb *self)
 	int ret = TRUE;
 	u8 Tx_status;
 
-	IRDA_DEBUG(3, "%s()\n", __FUNCTION__);
+	IRDA_DEBUG(3, "%s()\n", __func__);
 
 	iobase = self->io.fir_base;
 	/* Disable DMA */
@@ -1014,7 +1014,7 @@ static int via_ircc_dma_xmit_complete(struct via_ircc_cb *self)
 	}
 	IRDA_DEBUG(1,
 		   "%s: tx_fifo.len=%x ,tx_fifo.ptr=%x,tx_fifo.free=%x...\n",
-		   __FUNCTION__,
+		   __func__,
 		   self->tx_fifo.len, self->tx_fifo.ptr, self->tx_fifo.free);
 /* F01_S
 	// Any frames to be sent back-to-back? 
@@ -1050,7 +1050,7 @@ static int via_ircc_dma_receive(struct via_ircc_cb *self)
 
 	iobase = self->io.fir_base;
 
-	IRDA_DEBUG(3, "%s()\n", __FUNCTION__);
+	IRDA_DEBUG(3, "%s()\n", __func__);
 
 	self->tx_fifo.len = self->tx_fifo.ptr = self->tx_fifo.free = 0;
 	self->tx_fifo.tail = self->tx_buff.head;
@@ -1134,13 +1134,13 @@ static int via_ircc_dma_receive_complete(struct via_ircc_cb *self,
 			return TRUE;	//interrupt only, data maybe move by RxT  
 		if (((len - 4) < 2) || ((len - 4) > 2048)) {
 			IRDA_DEBUG(1, "%s(): Trouble:len=%x,CurCount=%x,LastCount=%x..\n",
-				   __FUNCTION__, len, RxCurCount(iobase, self),
+				   __func__, len, RxCurCount(iobase, self),
 				   self->RxLastCount);
 			hwreset(self);
 			return FALSE;
 		}
 		IRDA_DEBUG(2, "%s(): fifo.len=%x,len=%x,CurCount=%x..\n",
-			   __FUNCTION__,
+			   __func__,
 			   st_fifo->len, len - 4, RxCurCount(iobase, self));
 
 		st_fifo->entries[st_fifo->tail].status = status;
@@ -1187,7 +1187,7 @@ F01_E */
 		skb_put(skb, len - 4);
 
 		skb_copy_to_linear_data(skb, self->rx_buff.data, len - 4);
-		IRDA_DEBUG(2, "%s(): len=%x.rx_buff=%p\n", __FUNCTION__,
+		IRDA_DEBUG(2, "%s(): len=%x.rx_buff=%p\n", __func__,
 			   len - 4, self->rx_buff.data);
 
 		// Move to next frame 
@@ -1217,7 +1217,7 @@ static int upload_rxdata(struct via_ircc_cb *self, int iobase)
 
 	len = GetRecvByte(iobase, self);
 
-	IRDA_DEBUG(2, "%s(): len=%x\n", __FUNCTION__, len);
+	IRDA_DEBUG(2, "%s(): len=%x\n", __func__, len);
 
 	if ((len - 4) < 2) {
 		self->stats.rx_dropped++;
@@ -1302,7 +1302,7 @@ static int RxTimerHandler(struct via_ircc_cb *self, int iobase)
 			skb_put(skb, len - 4);
 			skb_copy_to_linear_data(skb, self->rx_buff.data, len - 4);
 
-			IRDA_DEBUG(2, "%s(): len=%x.head=%x\n", __FUNCTION__,
+			IRDA_DEBUG(2, "%s(): len=%x.head=%x\n", __func__,
 				   len - 4, st_fifo->head);
 
 			// Move to next frame 
@@ -1318,7 +1318,7 @@ static int RxTimerHandler(struct via_ircc_cb *self, int iobase)
 
 		IRDA_DEBUG(2,
 			   "%s(): End of upload HostStatus=%x,RxStatus=%x\n",
-			   __FUNCTION__,
+			   __func__,
 			   GetHostStatus(iobase), GetRXStatus(iobase));
 
 		/*
@@ -1358,7 +1358,7 @@ static irqreturn_t via_ircc_interrupt(int dummy, void *dev_id)
 	iHostIntType = GetHostStatus(iobase);
 
 	IRDA_DEBUG(4, "%s(): iHostIntType %02x:  %s %s %s  %02x\n",
-		   __FUNCTION__, iHostIntType,
+		   __func__, iHostIntType,
 		   (iHostIntType & 0x40) ? "Timer" : "",
 		   (iHostIntType & 0x20) ? "Tx" : "",
 		   (iHostIntType & 0x10) ? "Rx" : "",
@@ -1388,7 +1388,7 @@ static irqreturn_t via_ircc_interrupt(int dummy, void *dev_id)
 		iTxIntType = GetTXStatus(iobase);
 
 		IRDA_DEBUG(4, "%s(): iTxIntType %02x:  %s %s %s %s\n",
-			   __FUNCTION__, iTxIntType,
+			   __func__, iTxIntType,
 			   (iTxIntType & 0x08) ? "FIFO underr." : "",
 			   (iTxIntType & 0x04) ? "EOM" : "",
 			   (iTxIntType & 0x02) ? "FIFO ready" : "",
@@ -1412,7 +1412,7 @@ static irqreturn_t via_ircc_interrupt(int dummy, void *dev_id)
 		iRxIntType = GetRXStatus(iobase);
 
 		IRDA_DEBUG(4, "%s(): iRxIntType %02x:  %s %s %s %s %s %s %s\n",
-			   __FUNCTION__, iRxIntType,
+			   __func__, iRxIntType,
 			   (iRxIntType & 0x80) ? "PHY err."	: "",
 			   (iRxIntType & 0x40) ? "CRC err"	: "",
 			   (iRxIntType & 0x20) ? "FIFO overr."	: "",
@@ -1421,7 +1421,7 @@ static irqreturn_t via_ircc_interrupt(int dummy, void *dev_id)
 			   (iRxIntType & 0x02) ? "RxMaxLen"	: "",
 			   (iRxIntType & 0x01) ? "SIR bad"	: "");
 		if (!iRxIntType)
-			IRDA_DEBUG(3, "%s(): RxIRQ =0\n", __FUNCTION__);
+			IRDA_DEBUG(3, "%s(): RxIRQ =0\n", __func__);
 
 		if (iRxIntType & 0x10) {
 			if (via_ircc_dma_receive_complete(self, iobase)) {
@@ -1431,7 +1431,7 @@ static irqreturn_t via_ircc_interrupt(int dummy, void *dev_id)
 		}		// No ERR     
 		else {		//ERR
 			IRDA_DEBUG(4, "%s(): RxIRQ ERR:iRxIntType=%x,HostIntType=%x,CurCount=%x,RxLastCount=%x_____\n",
-				   __FUNCTION__, iRxIntType, iHostIntType,
+				   __func__, iRxIntType, iHostIntType,
 				   RxCurCount(iobase, self),
 				   self->RxLastCount);
 
@@ -1456,7 +1456,7 @@ static void hwreset(struct via_ircc_cb *self)
 	int iobase;
 	iobase = self->io.fir_base;
 
-	IRDA_DEBUG(3, "%s()\n", __FUNCTION__);
+	IRDA_DEBUG(3, "%s()\n", __func__);
 
 	ResetChip(iobase, 5);
 	EnableDMA(iobase, OFF);
@@ -1501,7 +1501,7 @@ static int via_ircc_is_receiving(struct via_ircc_cb *self)
 	if (CkRxRecv(iobase, self))
 		status = TRUE;
 
-	IRDA_DEBUG(2, "%s(): status=%x....\n", __FUNCTION__, status);
+	IRDA_DEBUG(2, "%s(): status=%x....\n", __func__, status);
 
 	return status;
 }
@@ -1519,7 +1519,7 @@ static int via_ircc_net_open(struct net_device *dev)
 	int iobase;
 	char hwname[32];
 
-	IRDA_DEBUG(3, "%s()\n", __FUNCTION__);
+	IRDA_DEBUG(3, "%s()\n", __func__);
 
 	IRDA_ASSERT(dev != NULL, return -1;);
 	self = (struct via_ircc_cb *) dev->priv;
@@ -1586,7 +1586,7 @@ static int via_ircc_net_close(struct net_device *dev)
 	struct via_ircc_cb *self;
 	int iobase;
 
-	IRDA_DEBUG(3, "%s()\n", __FUNCTION__);
+	IRDA_DEBUG(3, "%s()\n", __func__);
 
 	IRDA_ASSERT(dev != NULL, return -1;);
 	self = (struct via_ircc_cb *) dev->priv;
@@ -1630,7 +1630,7 @@ static int via_ircc_net_ioctl(struct net_device *dev, struct ifreq *rq,
 	IRDA_ASSERT(dev != NULL, return -1;);
 	self = dev->priv;
 	IRDA_ASSERT(self != NULL, return -1;);
-	IRDA_DEBUG(1, "%s(), %s, (cmd=0x%X)\n", __FUNCTION__, dev->name,
+	IRDA_DEBUG(1, "%s(), %s, (cmd=0x%X)\n", __func__, dev->name,
 		   cmd);
 	/* Disable interrupts & save flags */
 	spin_lock_irqsave(&self->lock, flags);
diff --git a/drivers/net/irda/vlsi_ir.c b/drivers/net/irda/vlsi_ir.c
index d15e00b8591e..18f4b3a96aed 100644
--- a/drivers/net/irda/vlsi_ir.c
+++ b/drivers/net/irda/vlsi_ir.c
@@ -140,15 +140,15 @@ static void vlsi_ring_debug(struct vlsi_ring *r)
 	unsigned i;
 
 	printk(KERN_DEBUG "%s - ring %p / size %u / mask 0x%04x / len %u / dir %d / hw %p\n",
-		__FUNCTION__, r, r->size, r->mask, r->len, r->dir, r->rd[0].hw);
-	printk(KERN_DEBUG "%s - head = %d / tail = %d\n", __FUNCTION__,
+		__func__, r, r->size, r->mask, r->len, r->dir, r->rd[0].hw);
+	printk(KERN_DEBUG "%s - head = %d / tail = %d\n", __func__,
 		atomic_read(&r->head) & r->mask, atomic_read(&r->tail) & r->mask);
 	for (i = 0; i < r->size; i++) {
 		rd = &r->rd[i];
-		printk(KERN_DEBUG "%s - ring descr %u: ", __FUNCTION__, i);
+		printk(KERN_DEBUG "%s - ring descr %u: ", __func__, i);
 		printk("skb=%p data=%p hw=%p\n", rd->skb, rd->buf, rd->hw);
 		printk(KERN_DEBUG "%s - hw: status=%02x count=%u addr=0x%08x\n",
-			__FUNCTION__, (unsigned) rd_get_status(rd),
+			__func__, (unsigned) rd_get_status(rd),
 			(unsigned) rd_get_count(rd), (unsigned) rd_get_addr(rd));
 	}
 }
@@ -435,7 +435,7 @@ static struct vlsi_ring *vlsi_alloc_ring(struct pci_dev *pdev, struct ring_descr
 		    ||  !(busaddr = pci_map_single(pdev, rd->buf, len, dir))) {
 			if (rd->buf) {
 				IRDA_ERROR("%s: failed to create PCI-MAP for %p",
-					   __FUNCTION__, rd->buf);
+					   __func__, rd->buf);
 				kfree(rd->buf);
 				rd->buf = NULL;
 			}
@@ -489,7 +489,7 @@ static int vlsi_create_hwif(vlsi_irda_dev_t *idev)
 	ringarea = pci_alloc_consistent(idev->pdev, HW_RING_AREA_SIZE, &idev->busaddr);
 	if (!ringarea) {
 		IRDA_ERROR("%s: insufficient memory for descriptor rings\n",
-			   __FUNCTION__);
+			   __func__);
 		goto out;
 	}
 	memset(ringarea, 0, HW_RING_AREA_SIZE);
@@ -564,7 +564,7 @@ static int vlsi_process_rx(struct vlsi_ring *r, struct ring_descr *rd)
 	crclen = (idev->mode==IFF_FIR) ? sizeof(u32) : sizeof(u16);
 	len -= crclen;		/* remove trailing CRC */
 	if (len <= 0) {
-		IRDA_DEBUG(0, "%s: strange frame (len=%d)\n", __FUNCTION__, len);
+		IRDA_DEBUG(0, "%s: strange frame (len=%d)\n", __func__, len);
 		ret |= VLSI_RX_DROP;
 		goto done;
 	}
@@ -579,14 +579,14 @@ static int vlsi_process_rx(struct vlsi_ring *r, struct ring_descr *rd)
 		 */
 		le16_to_cpus(rd->buf+len);
 		if (irda_calc_crc16(INIT_FCS,rd->buf,len+crclen) != GOOD_FCS) {
-			IRDA_DEBUG(0, "%s: crc error\n", __FUNCTION__);
+			IRDA_DEBUG(0, "%s: crc error\n", __func__);
 			ret |= VLSI_RX_CRC;
 			goto done;
 		}
 	}
 
 	if (!rd->skb) {
-		IRDA_WARNING("%s: rx packet lost\n", __FUNCTION__);
+		IRDA_WARNING("%s: rx packet lost\n", __func__);
 		ret |= VLSI_RX_DROP;
 		goto done;
 	}
@@ -617,7 +617,7 @@ static void vlsi_fill_rx(struct vlsi_ring *r)
 	for (rd = ring_last(r); rd != NULL; rd = ring_put(r)) {
 		if (rd_is_active(rd)) {
 			IRDA_WARNING("%s: driver bug: rx descr race with hw\n",
-				     __FUNCTION__);
+				     __func__);
 			vlsi_ring_debug(r);
 			break;
 		}
@@ -676,7 +676,7 @@ static void vlsi_rx_interrupt(struct net_device *ndev)
 
 	if (ring_first(r) == NULL) {
 		/* we are in big trouble, if this should ever happen */
-		IRDA_ERROR("%s: rx ring exhausted!\n", __FUNCTION__);
+		IRDA_ERROR("%s: rx ring exhausted!\n", __func__);
 		vlsi_ring_debug(r);
 	}
 	else
@@ -697,7 +697,7 @@ static void vlsi_unarm_rx(vlsi_irda_dev_t *idev)
 		if (rd_is_active(rd)) {
 			rd_set_status(rd, 0);
 			if (rd_get_count(rd)) {
-				IRDA_DEBUG(0, "%s - dropping rx packet\n", __FUNCTION__);
+				IRDA_DEBUG(0, "%s - dropping rx packet\n", __func__);
 				ret = -VLSI_RX_DROP;
 			}
 			rd_set_count(rd, 0);
@@ -772,7 +772,7 @@ static int vlsi_set_baud(vlsi_irda_dev_t *idev, unsigned iobase)
 	int	fifocnt;
 
 	baudrate = idev->new_baud;
-	IRDA_DEBUG(2, "%s: %d -> %d\n", __FUNCTION__, idev->baud, idev->new_baud);
+	IRDA_DEBUG(2, "%s: %d -> %d\n", __func__, idev->baud, idev->new_baud);
 	if (baudrate == 4000000) {
 		mode = IFF_FIR;
 		config = IRCFG_FIR;
@@ -789,7 +789,7 @@ static int vlsi_set_baud(vlsi_irda_dev_t *idev, unsigned iobase)
 		switch(baudrate) {
 			default:
 				IRDA_WARNING("%s: undefined baudrate %d - fallback to 9600!\n",
-					     __FUNCTION__, baudrate);
+					     __func__, baudrate);
 				baudrate = 9600;
 				/* fallthru */
 			case 2400:
@@ -806,7 +806,7 @@ static int vlsi_set_baud(vlsi_irda_dev_t *idev, unsigned iobase)
 
 	fifocnt = inw(iobase+VLSI_PIO_RCVBCNT) & RCVBCNT_MASK;
 	if (fifocnt != 0) {
-		IRDA_DEBUG(0, "%s: rx fifo not empty(%d)\n", __FUNCTION__, fifocnt);
+		IRDA_DEBUG(0, "%s: rx fifo not empty(%d)\n", __func__, fifocnt);
 	}
 
 	outw(0, iobase+VLSI_PIO_IRENABLE);
@@ -830,14 +830,14 @@ static int vlsi_set_baud(vlsi_irda_dev_t *idev, unsigned iobase)
 		config ^= IRENABLE_SIR_ON;
 
 	if (config != (IRENABLE_PHYANDCLOCK|IRENABLE_ENRXST)) {
-		IRDA_WARNING("%s: failed to set %s mode!\n", __FUNCTION__,
+		IRDA_WARNING("%s: failed to set %s mode!\n", __func__,
 			(mode==IFF_SIR)?"SIR":((mode==IFF_MIR)?"MIR":"FIR"));
 		ret = -1;
 	}
 	else {
 		if (inw(iobase+VLSI_PIO_PHYCTL) != nphyctl) {
 			IRDA_WARNING("%s: failed to apply baudrate %d\n",
-				     __FUNCTION__, baudrate);
+				     __func__, baudrate);
 			ret = -1;
 		}
 		else {
@@ -849,7 +849,7 @@ static int vlsi_set_baud(vlsi_irda_dev_t *idev, unsigned iobase)
 	}
 
 	if (ret)
-		vlsi_reg_debug(iobase,__FUNCTION__);
+		vlsi_reg_debug(iobase,__func__);
 
 	return ret;
 }
@@ -982,7 +982,7 @@ static int vlsi_hard_start_xmit(struct sk_buff *skb, struct net_device *ndev)
 
 		if (len >= r->len-5)
 			 IRDA_WARNING("%s: possible buffer overflow with SIR wrapping!\n",
-				      __FUNCTION__);
+				      __func__);
 	}
 	else {
 		/* hw deals with MIR/FIR mode wrapping */
@@ -1027,7 +1027,7 @@ static int vlsi_hard_start_xmit(struct sk_buff *skb, struct net_device *ndev)
 
 		fifocnt = inw(ndev->base_addr+VLSI_PIO_RCVBCNT) & RCVBCNT_MASK;
 		if (fifocnt != 0) {
-			IRDA_DEBUG(0, "%s: rx fifo not empty(%d)\n", __FUNCTION__, fifocnt);
+			IRDA_DEBUG(0, "%s: rx fifo not empty(%d)\n", __func__, fifocnt);
 		}
 
 		config = inw(iobase+VLSI_PIO_IRCFG);
@@ -1040,7 +1040,7 @@ static int vlsi_hard_start_xmit(struct sk_buff *skb, struct net_device *ndev)
 
 	if (ring_put(r) == NULL) {
 		netif_stop_queue(ndev);
-		IRDA_DEBUG(3, "%s: tx ring full - queue stopped\n", __FUNCTION__);
+		IRDA_DEBUG(3, "%s: tx ring full - queue stopped\n", __func__);
 	}
 	spin_unlock_irqrestore(&idev->lock, flags);
 
@@ -1049,7 +1049,7 @@ static int vlsi_hard_start_xmit(struct sk_buff *skb, struct net_device *ndev)
 drop_unlock:
 	spin_unlock_irqrestore(&idev->lock, flags);
 drop:
-	IRDA_WARNING("%s: dropping packet - %s\n", __FUNCTION__, msg);
+	IRDA_WARNING("%s: dropping packet - %s\n", __func__, msg);
 	dev_kfree_skb_any(skb);
 	idev->stats.tx_errors++;
 	idev->stats.tx_dropped++;
@@ -1106,7 +1106,7 @@ static void vlsi_tx_interrupt(struct net_device *ndev)
 		fifocnt = inw(iobase+VLSI_PIO_RCVBCNT) & RCVBCNT_MASK;
 		if (fifocnt != 0) {
 			IRDA_DEBUG(0, "%s: rx fifo not empty(%d)\n",
-				__FUNCTION__, fifocnt);
+				__func__, fifocnt);
 		}
 		outw(config | IRCFG_ENTX, iobase+VLSI_PIO_IRCFG);
 	}
@@ -1115,7 +1115,7 @@ static void vlsi_tx_interrupt(struct net_device *ndev)
 
 	if (netif_queue_stopped(ndev)  &&  !idev->new_baud) {
 		netif_wake_queue(ndev);
-		IRDA_DEBUG(3, "%s: queue awoken\n", __FUNCTION__);
+		IRDA_DEBUG(3, "%s: queue awoken\n", __func__);
 	}
 }
 
@@ -1138,7 +1138,7 @@ static void vlsi_unarm_tx(vlsi_irda_dev_t *idev)
 				dev_kfree_skb_any(rd->skb);
 				rd->skb = NULL;
 			}
-			IRDA_DEBUG(0, "%s - dropping tx packet\n", __FUNCTION__);
+			IRDA_DEBUG(0, "%s - dropping tx packet\n", __func__);
 			ret = -VLSI_TX_DROP;
 		}
 		else
@@ -1188,7 +1188,7 @@ static int vlsi_start_clock(struct pci_dev *pdev)
 		if (count < 3) {
 			if (clksrc == 1) { /* explicitly asked for PLL hence bail out */
 				IRDA_ERROR("%s: no PLL or failed to lock!\n",
-					   __FUNCTION__);
+					   __func__);
 				clkctl = CLKCTL_CLKSTP;
 				pci_write_config_byte(pdev, VLSI_PCI_CLKCTL, clkctl);
 				return -1;
@@ -1197,7 +1197,7 @@ static int vlsi_start_clock(struct pci_dev *pdev)
 				clksrc = 3;	/* fallback to 40MHz XCLK (OB800) */
 
 			IRDA_DEBUG(0, "%s: PLL not locked, fallback to clksrc=%d\n",
-				__FUNCTION__, clksrc);
+				__func__, clksrc);
 		}
 		else
 			clksrc = 1;	/* got successful PLL lock */
@@ -1269,7 +1269,7 @@ static int vlsi_init_chip(struct pci_dev *pdev)
 	/* start the clock and clean the registers */
 
 	if (vlsi_start_clock(pdev)) {
-		IRDA_ERROR("%s: no valid clock source\n", __FUNCTION__);
+		IRDA_ERROR("%s: no valid clock source\n", __func__);
 		return -1;
 	}
 	iobase = ndev->base_addr;
@@ -1386,7 +1386,7 @@ static void vlsi_tx_timeout(struct net_device *ndev)
 	vlsi_irda_dev_t *idev = ndev->priv;
 
 
-	vlsi_reg_debug(ndev->base_addr, __FUNCTION__);
+	vlsi_reg_debug(ndev->base_addr, __func__);
 	vlsi_ring_debug(idev->tx_ring);
 
 	if (netif_running(ndev))
@@ -1401,7 +1401,7 @@ static void vlsi_tx_timeout(struct net_device *ndev)
 
 	if (vlsi_start_hw(idev))
 		IRDA_ERROR("%s: failed to restart hw - %s(%s) unusable!\n",
-			   __FUNCTION__, pci_name(idev->pdev), ndev->name);
+			   __func__, pci_name(idev->pdev), ndev->name);
 	else
 		netif_start_queue(ndev);
 }
@@ -1446,7 +1446,7 @@ static int vlsi_ioctl(struct net_device *ndev, struct ifreq *rq, int cmd)
 			break;
 		default:
 			IRDA_WARNING("%s: notsupp - cmd=%04x\n",
-				     __FUNCTION__, cmd);
+				     __func__, cmd);
 			ret = -EOPNOTSUPP;
 	}	
 	
@@ -1491,7 +1491,7 @@ static irqreturn_t vlsi_interrupt(int irq, void *dev_instance)
 
 	if (boguscount <= 0)
 		IRDA_MESSAGE("%s: too much work in interrupt!\n",
-			     __FUNCTION__);
+			     __func__);
 	return IRQ_RETVAL(handled);
 }
 
@@ -1504,7 +1504,7 @@ static int vlsi_open(struct net_device *ndev)
 	char	hwname[32];
 
 	if (pci_request_regions(idev->pdev, drivername)) {
-		IRDA_WARNING("%s: io resource busy\n", __FUNCTION__);
+		IRDA_WARNING("%s: io resource busy\n", __func__);
 		goto errout;
 	}
 	ndev->base_addr = pci_resource_start(idev->pdev,0);
@@ -1519,7 +1519,7 @@ static int vlsi_open(struct net_device *ndev)
 	if (request_irq(ndev->irq, vlsi_interrupt, IRQF_SHARED,
 			drivername, ndev)) {
 		IRDA_WARNING("%s: couldn't get IRQ: %d\n",
-			     __FUNCTION__, ndev->irq);
+			     __func__, ndev->irq);
 		goto errout_io;
 	}
 
@@ -1540,7 +1540,7 @@ static int vlsi_open(struct net_device *ndev)
 
 	netif_start_queue(ndev);
 
-	IRDA_MESSAGE("%s: device %s operational\n", __FUNCTION__, ndev->name);
+	IRDA_MESSAGE("%s: device %s operational\n", __func__, ndev->name);
 
 	return 0;
 
@@ -1574,7 +1574,7 @@ static int vlsi_close(struct net_device *ndev)
 
 	pci_release_regions(idev->pdev);
 
-	IRDA_MESSAGE("%s: device %s stopped\n", __FUNCTION__, ndev->name);
+	IRDA_MESSAGE("%s: device %s stopped\n", __func__, ndev->name);
 
 	return 0;
 }
@@ -1593,7 +1593,7 @@ static int vlsi_irda_init(struct net_device *ndev)
 
 	if (pci_set_dma_mask(pdev,DMA_MASK_USED_BY_HW)
 	    || pci_set_dma_mask(pdev,DMA_MASK_MSTRPAGE)) {
-		IRDA_ERROR("%s: aborting due to PCI BM-DMA address limitations\n", __FUNCTION__);
+		IRDA_ERROR("%s: aborting due to PCI BM-DMA address limitations\n", __func__);
 		return -1;
 	}
 
@@ -1645,14 +1645,14 @@ vlsi_irda_probe(struct pci_dev *pdev, const struct pci_device_id *id)
 
 	if ( !pci_resource_start(pdev,0)
 	     || !(pci_resource_flags(pdev,0) & IORESOURCE_IO) ) {
-		IRDA_ERROR("%s: bar 0 invalid", __FUNCTION__);
+		IRDA_ERROR("%s: bar 0 invalid", __func__);
 		goto out_disable;
 	}
 
 	ndev = alloc_irdadev(sizeof(*idev));
 	if (ndev==NULL) {
 		IRDA_ERROR("%s: Unable to allocate device memory.\n",
-			   __FUNCTION__);
+			   __func__);
 		goto out_disable;
 	}
 
@@ -1667,7 +1667,7 @@ vlsi_irda_probe(struct pci_dev *pdev, const struct pci_device_id *id)
 		goto out_freedev;
 
 	if (register_netdev(ndev) < 0) {
-		IRDA_ERROR("%s: register_netdev failed\n", __FUNCTION__);
+		IRDA_ERROR("%s: register_netdev failed\n", __func__);
 		goto out_freedev;
 	}
 
@@ -1678,7 +1678,7 @@ vlsi_irda_probe(struct pci_dev *pdev, const struct pci_device_id *id)
 				       vlsi_proc_root, VLSI_PROC_FOPS, ndev);
 		if (!ent) {
 			IRDA_WARNING("%s: failed to create proc entry\n",
-				     __FUNCTION__);
+				     __func__);
 		} else {
 			ent->size = 0;
 		}
@@ -1745,7 +1745,7 @@ static int vlsi_irda_suspend(struct pci_dev *pdev, pm_message_t state)
 
 	if (!ndev) {
 		IRDA_ERROR("%s - %s: no netdevice \n",
-			   __FUNCTION__, pci_name(pdev));
+			   __func__, pci_name(pdev));
 		return 0;
 	}
 	idev = ndev->priv;	
@@ -1756,7 +1756,7 @@ static int vlsi_irda_suspend(struct pci_dev *pdev, pm_message_t state)
 			pdev->current_state = state.event;
 		}
 		else
-			IRDA_ERROR("%s - %s: invalid suspend request %u -> %u\n", __FUNCTION__, pci_name(pdev), pdev->current_state, state.event);
+			IRDA_ERROR("%s - %s: invalid suspend request %u -> %u\n", __func__, pci_name(pdev), pdev->current_state, state.event);
 		mutex_unlock(&idev->mtx);
 		return 0;
 	}
@@ -1784,7 +1784,7 @@ static int vlsi_irda_resume(struct pci_dev *pdev)
 
 	if (!ndev) {
 		IRDA_ERROR("%s - %s: no netdevice \n",
-			   __FUNCTION__, pci_name(pdev));
+			   __func__, pci_name(pdev));
 		return 0;
 	}
 	idev = ndev->priv;	
@@ -1792,7 +1792,7 @@ static int vlsi_irda_resume(struct pci_dev *pdev)
 	if (pdev->current_state == 0) {
 		mutex_unlock(&idev->mtx);
 		IRDA_WARNING("%s - %s: already resumed\n",
-			     __FUNCTION__, pci_name(pdev));
+			     __func__, pci_name(pdev));
 		return 0;
 	}
 	
@@ -1811,7 +1811,7 @@ static int vlsi_irda_resume(struct pci_dev *pdev)
 		 * now we explicitly set pdev->current_state = 0 after enabling the
 		 * device and independently resume_ok should catch any garbage config.
 		 */
-		IRDA_WARNING("%s - hm, nothing to resume?\n", __FUNCTION__);
+		IRDA_WARNING("%s - hm, nothing to resume?\n", __func__);
 		mutex_unlock(&idev->mtx);
 		return 0;
 	}
diff --git a/drivers/net/irda/vlsi_ir.h b/drivers/net/irda/vlsi_ir.h
index c8b9c74eea52..9b1884329fba 100644
--- a/drivers/net/irda/vlsi_ir.h
+++ b/drivers/net/irda/vlsi_ir.h
@@ -617,7 +617,7 @@ static inline void rd_set_addr_status(struct ring_descr *rd, dma_addr_t a, u8 s)
 	 */
 
 	if ((a & ~DMA_MASK_MSTRPAGE)>>24 != MSTRPAGE_VALUE) {
-		IRDA_ERROR("%s: pci busaddr inconsistency!\n", __FUNCTION__);
+		IRDA_ERROR("%s: pci busaddr inconsistency!\n", __func__);
 		dump_stack();
 		return;
 	}
diff --git a/drivers/net/irda/w83977af_ir.c b/drivers/net/irda/w83977af_ir.c
index 9fd2451b0fb2..002a6d769f21 100644
--- a/drivers/net/irda/w83977af_ir.c
+++ b/drivers/net/irda/w83977af_ir.c
@@ -114,7 +114,7 @@ static int __init w83977af_init(void)
 {
         int i;
 
-	IRDA_DEBUG(0, "%s()\n", __FUNCTION__ );
+	IRDA_DEBUG(0, "%s()\n", __func__ );
 
 	for (i=0; (io[i] < 2000) && (i < ARRAY_SIZE(dev_self)); i++) {
 		if (w83977af_open(i, io[i], irq[i], dma[i]) == 0)
@@ -133,7 +133,7 @@ static void __exit w83977af_cleanup(void)
 {
 	int i;
 
-        IRDA_DEBUG(4, "%s()\n", __FUNCTION__ );
+        IRDA_DEBUG(4, "%s()\n", __func__ );
 
 	for (i=0; i < ARRAY_SIZE(dev_self); i++) {
 		if (dev_self[i])
@@ -154,12 +154,12 @@ int w83977af_open(int i, unsigned int iobase, unsigned int irq,
         struct w83977af_ir *self;
 	int err;
 
-	IRDA_DEBUG(0, "%s()\n", __FUNCTION__ );
+	IRDA_DEBUG(0, "%s()\n", __func__ );
 
 	/* Lock the port that we need */
 	if (!request_region(iobase, CHIP_IO_EXTENT, driver_name)) {
 		IRDA_DEBUG(0, "%s(), can't get iobase of 0x%03x\n",
-		      __FUNCTION__ , iobase);
+		      __func__ , iobase);
 		return -ENODEV;
 	}
 
@@ -241,7 +241,7 @@ int w83977af_open(int i, unsigned int iobase, unsigned int irq,
 
 	err = register_netdev(dev);
 	if (err) {
-		IRDA_ERROR("%s(), register_netdevice() failed!\n", __FUNCTION__);
+		IRDA_ERROR("%s(), register_netdevice() failed!\n", __func__);
 		goto err_out3;
 	}
 	IRDA_MESSAGE("IrDA: Registered device %s\n", dev->name);
@@ -273,7 +273,7 @@ static int w83977af_close(struct w83977af_ir *self)
 {
 	int iobase;
 
-	IRDA_DEBUG(0, "%s()\n", __FUNCTION__ );
+	IRDA_DEBUG(0, "%s()\n", __func__ );
 
         iobase = self->io.fir_base;
 
@@ -294,7 +294,7 @@ static int w83977af_close(struct w83977af_ir *self)
 
 	/* Release the PORT that this driver is using */
 	IRDA_DEBUG(0 , "%s(), Releasing Region %03x\n", 
-	      __FUNCTION__ , self->io.fir_base);
+	      __func__ , self->io.fir_base);
 	release_region(self->io.fir_base, self->io.fir_ext);
 
 	if (self->tx_buff.head)
@@ -316,7 +316,7 @@ int w83977af_probe( int iobase, int irq, int dma)
 	int i;
   	
  	for (i=0; i < 2; i++) {
- 		IRDA_DEBUG( 0, "%s()\n", __FUNCTION__ );
+		IRDA_DEBUG( 0, "%s()\n", __func__ );
 #ifdef CONFIG_USE_W977_PNP
  		/* Enter PnP configuration mode */
 		w977_efm_enter(efbase[i]);
@@ -403,7 +403,7 @@ int w83977af_probe( int iobase, int irq, int dma)
 			return 0;
 		} else {
 			/* Try next extented function register address */
-			IRDA_DEBUG( 0, "%s(), Wrong chip version", __FUNCTION__ );
+			IRDA_DEBUG( 0, "%s(), Wrong chip version", __func__ );
 		}
   	}   	
 	return -1;
@@ -439,19 +439,19 @@ void w83977af_change_speed(struct w83977af_ir *self, __u32 speed)
 	case 115200: outb(0x01, iobase+ABLL); break;
 	case 576000:
 		ir_mode = HCR_MIR_576;
-		IRDA_DEBUG(0, "%s(), handling baud of 576000\n", __FUNCTION__ );
+		IRDA_DEBUG(0, "%s(), handling baud of 576000\n", __func__ );
 		break;
 	case 1152000:
 		ir_mode = HCR_MIR_1152;
-		IRDA_DEBUG(0, "%s(), handling baud of 1152000\n", __FUNCTION__ );
+		IRDA_DEBUG(0, "%s(), handling baud of 1152000\n", __func__ );
 		break;
 	case 4000000:
 		ir_mode = HCR_FIR;
-		IRDA_DEBUG(0, "%s(), handling baud of 4000000\n", __FUNCTION__ );
+		IRDA_DEBUG(0, "%s(), handling baud of 4000000\n", __func__ );
 		break;
 	default:
 		ir_mode = HCR_FIR;
-		IRDA_DEBUG(0, "%s(), unknown baud rate of %d\n", __FUNCTION__ , speed);
+		IRDA_DEBUG(0, "%s(), unknown baud rate of %d\n", __func__ , speed);
 		break;
 	}
 
@@ -501,7 +501,7 @@ int w83977af_hard_xmit(struct sk_buff *skb, struct net_device *dev)
 
 	iobase = self->io.fir_base;
 
-	IRDA_DEBUG(4, "%s(%ld), skb->len=%d\n", __FUNCTION__ , jiffies, 
+	IRDA_DEBUG(4, "%s(%ld), skb->len=%d\n", __func__ , jiffies,
 		   (int) skb->len);
 	
 	/* Lock transmit buffer */
@@ -549,7 +549,7 @@ int w83977af_hard_xmit(struct sk_buff *skb, struct net_device *dev)
 			outb(ICR_ETMRI, iobase+ICR);
 		} else {
 #endif
-			IRDA_DEBUG(4, "%s(%ld), mtt=%d\n", __FUNCTION__ , jiffies, mtt);
+			IRDA_DEBUG(4, "%s(%ld), mtt=%d\n", __func__ , jiffies, mtt);
 			if (mtt)
 				udelay(mtt);
 
@@ -591,7 +591,7 @@ static void w83977af_dma_write(struct w83977af_ir *self, int iobase)
 	unsigned long flags;
 	__u8 hcr;
 #endif
-        IRDA_DEBUG(4, "%s(), len=%d\n", __FUNCTION__ , self->tx_buff.len);
+        IRDA_DEBUG(4, "%s(), len=%d\n", __func__ , self->tx_buff.len);
 
 	/* Save current set */
 	set = inb(iobase+SSR);
@@ -643,7 +643,7 @@ static int w83977af_pio_write(int iobase, __u8 *buf, int len, int fifo_size)
 	int actual = 0;
 	__u8 set;
 	
-	IRDA_DEBUG(4, "%s()\n", __FUNCTION__ );
+	IRDA_DEBUG(4, "%s()\n", __func__ );
 
 	/* Save current bank */
 	set = inb(iobase+SSR);
@@ -651,11 +651,11 @@ static int w83977af_pio_write(int iobase, __u8 *buf, int len, int fifo_size)
 	switch_bank(iobase, SET0);
 	if (!(inb_p(iobase+USR) & USR_TSRE)) {
 		IRDA_DEBUG(4,
-			   "%s(), warning, FIFO not empty yet!\n", __FUNCTION__  );
+			   "%s(), warning, FIFO not empty yet!\n", __func__  );
 
 		fifo_size -= 17;
 		IRDA_DEBUG(4, "%s(), %d bytes left in tx fifo\n", 
-			   __FUNCTION__ , fifo_size);
+			   __func__ , fifo_size);
 	}
 
 	/* Fill FIFO with current frame */
@@ -665,7 +665,7 @@ static int w83977af_pio_write(int iobase, __u8 *buf, int len, int fifo_size)
 	}
         
 	IRDA_DEBUG(4, "%s(), fifo_size %d ; %d sent of %d\n", 
-		   __FUNCTION__ , fifo_size, actual, len);
+		   __func__ , fifo_size, actual, len);
 
 	/* Restore bank */
 	outb(set, iobase+SSR);
@@ -685,7 +685,7 @@ static void w83977af_dma_xmit_complete(struct w83977af_ir *self)
 	int iobase;
 	__u8 set;
 
-	IRDA_DEBUG(4, "%s(%ld)\n", __FUNCTION__ , jiffies);
+	IRDA_DEBUG(4, "%s(%ld)\n", __func__ , jiffies);
 
 	IRDA_ASSERT(self != NULL, return;);
 
@@ -700,7 +700,7 @@ static void w83977af_dma_xmit_complete(struct w83977af_ir *self)
 	
 	/* Check for underrrun! */
 	if (inb(iobase+AUDR) & AUDR_UNDR) {
-		IRDA_DEBUG(0, "%s(), Transmit underrun!\n", __FUNCTION__ );
+		IRDA_DEBUG(0, "%s(), Transmit underrun!\n", __func__ );
 		
 		self->stats.tx_errors++;
 		self->stats.tx_fifo_errors++;
@@ -741,7 +741,7 @@ int w83977af_dma_receive(struct w83977af_ir *self)
 #endif
 	IRDA_ASSERT(self != NULL, return -1;);
 
-	IRDA_DEBUG(4, "%s\n", __FUNCTION__ );
+	IRDA_DEBUG(4, "%s\n", __func__ );
 
 	iobase= self->io.fir_base;
 
@@ -812,7 +812,7 @@ int w83977af_dma_receive_complete(struct w83977af_ir *self)
 	__u8 set;
 	__u8 status;
 
-	IRDA_DEBUG(4, "%s\n", __FUNCTION__ );
+	IRDA_DEBUG(4, "%s\n", __func__ );
 
 	st_fifo = &self->st_fifo;
 
@@ -892,7 +892,7 @@ int w83977af_dma_receive_complete(struct w83977af_ir *self)
 			skb = dev_alloc_skb(len+1);
 			if (skb == NULL)  {
 				printk(KERN_INFO
-				       "%s(), memory squeeze, dropping frame.\n", __FUNCTION__);
+				       "%s(), memory squeeze, dropping frame.\n", __func__);
 				/* Restore set register */
 				outb(set, iobase+SSR);
 
@@ -943,7 +943,7 @@ static void w83977af_pio_receive(struct w83977af_ir *self)
 	__u8 byte = 0x00;
 	int iobase;
 
-	IRDA_DEBUG(4, "%s()\n", __FUNCTION__ );
+	IRDA_DEBUG(4, "%s()\n", __func__ );
 
 	IRDA_ASSERT(self != NULL, return;);
 	
@@ -970,7 +970,7 @@ static __u8 w83977af_sir_interrupt(struct w83977af_ir *self, int isr)
 	__u8 set;
 	int iobase;
 
-	IRDA_DEBUG(4, "%s(), isr=%#x\n", __FUNCTION__ , isr);
+	IRDA_DEBUG(4, "%s(), isr=%#x\n", __func__ , isr);
 	
 	iobase = self->io.fir_base;
 	/* Transmit FIFO low on data */
@@ -1007,7 +1007,7 @@ static __u8 w83977af_sir_interrupt(struct w83977af_ir *self, int isr)
 		/* Check if we need to change the speed? */
 		if (self->new_speed) {
 			IRDA_DEBUG(2,
-				   "%s(), Changing speed!\n", __FUNCTION__ );
+				   "%s(), Changing speed!\n", __func__ );
 			w83977af_change_speed(self, self->new_speed);
 			self->new_speed = 0;
 		}
@@ -1189,7 +1189,7 @@ static int w83977af_net_open(struct net_device *dev)
 	char hwname[32];
 	__u8 set;
 	
-	IRDA_DEBUG(0, "%s()\n", __FUNCTION__ );
+	IRDA_DEBUG(0, "%s()\n", __func__ );
 	
 	IRDA_ASSERT(dev != NULL, return -1;);
 	self = (struct w83977af_ir *) dev->priv;
@@ -1252,7 +1252,7 @@ static int w83977af_net_close(struct net_device *dev)
 	int iobase;
 	__u8 set;
 
-	IRDA_DEBUG(0, "%s()\n", __FUNCTION__ );
+	IRDA_DEBUG(0, "%s()\n", __func__ );
 
 	IRDA_ASSERT(dev != NULL, return -1;);
 	
@@ -1307,7 +1307,7 @@ static int w83977af_net_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
 
 	IRDA_ASSERT(self != NULL, return -1;);
 
-	IRDA_DEBUG(2, "%s(), %s, (cmd=0x%X)\n", __FUNCTION__ , dev->name, cmd);
+	IRDA_DEBUG(2, "%s(), %s, (cmd=0x%X)\n", __func__ , dev->name, cmd);
 	
 	spin_lock_irqsave(&self->lock, flags);
 
diff --git a/drivers/net/iseries_veth.c b/drivers/net/iseries_veth.c
index b8d0639c1cdf..c46864d626b2 100644
--- a/drivers/net/iseries_veth.c
+++ b/drivers/net/iseries_veth.c
@@ -1128,7 +1128,7 @@ static int veth_transmit_to_one(struct sk_buff *skb, HvLpIndex rlp,
 	msg->data.addr[0] = dma_map_single(port->dev, skb->data,
 				skb->len, DMA_TO_DEVICE);
 
-	if (dma_mapping_error(msg->data.addr[0]))
+	if (dma_mapping_error(port->dev, msg->data.addr[0]))
 		goto recycle_and_drop;
 
 	msg->dev = port->dev;
@@ -1226,7 +1226,7 @@ static void veth_recycle_msg(struct veth_lpar_connection *cnx,
 		dma_address = msg->data.addr[0];
 		dma_length = msg->data.len[0];
 
-		if (!dma_mapping_error(dma_address))
+		if (!dma_mapping_error(msg->dev, dma_address))
 			dma_unmap_single(msg->dev, dma_address, dma_length,
 					DMA_TO_DEVICE);
 
diff --git a/drivers/net/ixgbe/ixgbe_82598.c b/drivers/net/ixgbe/ixgbe_82598.c
index 2f38e847e2cd..f96358b641af 100644
--- a/drivers/net/ixgbe/ixgbe_82598.c
+++ b/drivers/net/ixgbe/ixgbe_82598.c
@@ -190,6 +190,7 @@ static enum ixgbe_media_type ixgbe_get_media_type_82598(struct ixgbe_hw *hw)
 	case IXGBE_DEV_ID_82598AF_DUAL_PORT:
 	case IXGBE_DEV_ID_82598AF_SINGLE_PORT:
 	case IXGBE_DEV_ID_82598EB_CX4:
+	case IXGBE_DEV_ID_82598_CX4_DUAL_PORT:
 		media_type = ixgbe_media_type_fiber;
 		break;
 	case IXGBE_DEV_ID_82598AT_DUAL_PORT:
diff --git a/drivers/net/ixgbe/ixgbe_main.c b/drivers/net/ixgbe/ixgbe_main.c
index e5f3da8468cc..a417be7f8be5 100644
--- a/drivers/net/ixgbe/ixgbe_main.c
+++ b/drivers/net/ixgbe/ixgbe_main.c
@@ -48,7 +48,7 @@ char ixgbe_driver_name[] = "ixgbe";
 static const char ixgbe_driver_string[] =
 	"Intel(R) 10 Gigabit PCI Express Network Driver";
 
-#define DRV_VERSION "1.3.18-k2"
+#define DRV_VERSION "1.3.18-k4"
 const char ixgbe_driver_version[] = DRV_VERSION;
 static const char ixgbe_copyright[] =
 	 "Copyright (c) 1999-2007 Intel Corporation.";
@@ -72,6 +72,8 @@ static struct pci_device_id ixgbe_pci_tbl[] = {
 	 board_82598 },
 	{PCI_VDEVICE(INTEL, IXGBE_DEV_ID_82598EB_CX4),
 	 board_82598 },
+	{PCI_VDEVICE(INTEL, IXGBE_DEV_ID_82598_CX4_DUAL_PORT),
+	 board_82598 },
 
 	/* required last entry */
 	{0, }
@@ -1634,16 +1636,17 @@ static void ixgbe_set_multi(struct net_device *netdev)
 	struct ixgbe_hw *hw = &adapter->hw;
 	struct dev_mc_list *mc_ptr;
 	u8 *mta_list;
-	u32 fctrl;
+	u32 fctrl, vlnctrl;
 	int i;
 
 	/* Check for Promiscuous and All Multicast modes */
 
 	fctrl = IXGBE_READ_REG(hw, IXGBE_FCTRL);
+	vlnctrl = IXGBE_READ_REG(hw, IXGBE_VLNCTRL);
 
 	if (netdev->flags & IFF_PROMISC) {
 		fctrl |= (IXGBE_FCTRL_UPE | IXGBE_FCTRL_MPE);
-		fctrl &= ~IXGBE_VLNCTRL_VFE;
+		vlnctrl &= ~IXGBE_VLNCTRL_VFE;
 	} else {
 		if (netdev->flags & IFF_ALLMULTI) {
 			fctrl |= IXGBE_FCTRL_MPE;
@@ -1651,10 +1654,11 @@ static void ixgbe_set_multi(struct net_device *netdev)
 		} else {
 			fctrl &= ~(IXGBE_FCTRL_UPE | IXGBE_FCTRL_MPE);
 		}
-		fctrl |= IXGBE_VLNCTRL_VFE;
+		vlnctrl |= IXGBE_VLNCTRL_VFE;
 	}
 
 	IXGBE_WRITE_REG(hw, IXGBE_FCTRL, fctrl);
+	IXGBE_WRITE_REG(hw, IXGBE_VLNCTRL, vlnctrl);
 
 	if (netdev->mc_count) {
 		mta_list = kcalloc(netdev->mc_count, ETH_ALEN, GFP_ATOMIC);
@@ -2300,6 +2304,12 @@ static int __devinit ixgbe_set_interrupt_capability(struct ixgbe_adapter
 	int vector, v_budget;
 
 	/*
+	 * Set the default interrupt throttle rate.
+	 */
+	adapter->rx_eitr = (1000000 / IXGBE_DEFAULT_ITR_RX_USECS);
+	adapter->tx_eitr = (1000000 / IXGBE_DEFAULT_ITR_TX_USECS);
+
+	/*
 	 * It's easy to be greedy for MSI-X vectors, but it really
 	 * doesn't do us much good if we have a lot more vectors
 	 * than CPU's.  So let's be conservative and only ask for
diff --git a/drivers/net/ixgbe/ixgbe_type.h b/drivers/net/ixgbe/ixgbe_type.h
index 1ad7cb9c25a8..c0282a223df3 100644
--- a/drivers/net/ixgbe/ixgbe_type.h
+++ b/drivers/net/ixgbe/ixgbe_type.h
@@ -39,6 +39,7 @@
 #define IXGBE_DEV_ID_82598AF_SINGLE_PORT 0x10C7
 #define IXGBE_DEV_ID_82598AT_DUAL_PORT   0x10C8
 #define IXGBE_DEV_ID_82598EB_CX4         0x10DD
+#define IXGBE_DEV_ID_82598_CX4_DUAL_PORT 0x10EC
 
 /* General Registers */
 #define IXGBE_CTRL      0x00000
diff --git a/drivers/net/ixp2000/ixp2400-msf.c b/drivers/net/ixp2000/ixp2400-msf.c
index 9ec38eebfb56..f5ffd7e05d26 100644
--- a/drivers/net/ixp2000/ixp2400-msf.c
+++ b/drivers/net/ixp2000/ixp2400-msf.c
@@ -13,8 +13,8 @@
 
 #include <linux/kernel.h>
 #include <linux/init.h>
-#include <asm/hardware.h>
-#include <asm/arch/ixp2000-regs.h>
+#include <mach/hardware.h>
+#include <mach/ixp2000-regs.h>
 #include <asm/delay.h>
 #include <asm/io.h>
 #include "ixp2400-msf.h"
diff --git a/drivers/net/ixp2000/ixpdev.c b/drivers/net/ixp2000/ixpdev.c
index 7111c65f0b30..7b70c66504a0 100644
--- a/drivers/net/ixp2000/ixpdev.c
+++ b/drivers/net/ixp2000/ixpdev.c
@@ -16,7 +16,6 @@
 #include <linux/init.h>
 #include <linux/moduleparam.h>
 #include <asm/hardware/uengine.h>
-#include <asm/mach-types.h>
 #include <asm/io.h>
 #include "ixp2400_rx.ucode"
 #include "ixp2400_tx.ucode"
diff --git a/drivers/net/loopback.c b/drivers/net/loopback.c
index 49f6bc036a92..3b43bfd85a0f 100644
--- a/drivers/net/loopback.c
+++ b/drivers/net/loopback.c
@@ -64,68 +64,6 @@ struct pcpu_lstats {
 	unsigned long bytes;
 };
 
-/* KISS: just allocate small chunks and copy bits.
- *
- * So, in fact, this is documentation, explaining what we expect
- * of largesending device modulo TCP checksum, which is ignored for loopback.
- */
-
-#ifdef LOOPBACK_TSO
-static void emulate_large_send_offload(struct sk_buff *skb)
-{
-	struct iphdr *iph = ip_hdr(skb);
-	struct tcphdr *th = (struct tcphdr *)(skb_network_header(skb) +
-					      (iph->ihl * 4));
-	unsigned int doffset = (iph->ihl + th->doff) * 4;
-	unsigned int mtu = skb_shinfo(skb)->gso_size + doffset;
-	unsigned int offset = 0;
-	u32 seq = ntohl(th->seq);
-	u16 id  = ntohs(iph->id);
-
-	while (offset + doffset < skb->len) {
-		unsigned int frag_size = min(mtu, skb->len - offset) - doffset;
-		struct sk_buff *nskb = alloc_skb(mtu + 32, GFP_ATOMIC);
-
-		if (!nskb)
-			break;
-		skb_reserve(nskb, 32);
-		skb_set_mac_header(nskb, -ETH_HLEN);
-		skb_reset_network_header(nskb);
-		iph = ip_hdr(nskb);
-		skb_copy_to_linear_data(nskb, skb_network_header(skb),
-					doffset);
-		if (skb_copy_bits(skb,
-				  doffset + offset,
-				  nskb->data + doffset,
-				  frag_size))
-			BUG();
-		skb_put(nskb, doffset + frag_size);
-		nskb->ip_summed = CHECKSUM_UNNECESSARY;
-		nskb->dev = skb->dev;
-		nskb->priority = skb->priority;
-		nskb->protocol = skb->protocol;
-		nskb->dst = dst_clone(skb->dst);
-		memcpy(nskb->cb, skb->cb, sizeof(skb->cb));
-		nskb->pkt_type = skb->pkt_type;
-
-		th = (struct tcphdr *)(skb_network_header(nskb) + iph->ihl * 4);
-		iph->tot_len = htons(frag_size + doffset);
-		iph->id = htons(id);
-		iph->check = 0;
-		iph->check = ip_fast_csum((unsigned char *) iph, iph->ihl);
-		th->seq = htonl(seq);
-		if (offset + doffset + frag_size < skb->len)
-			th->fin = th->psh = 0;
-		netif_rx(nskb);
-		offset += frag_size;
-		seq += frag_size;
-		id++;
-	}
-
-	dev_kfree_skb(skb);
-}
-#endif /* LOOPBACK_TSO */
-
 /*
  * The higher levels take care of making this non-reentrant (it's
  * called with bh's disabled).
@@ -137,9 +75,6 @@ static int loopback_xmit(struct sk_buff *skb, struct net_device *dev)
 	skb_orphan(skb);
 
 	skb->protocol = eth_type_trans(skb,dev);
-#ifndef LOOPBACK_MUST_CHECKSUM
-	skb->ip_summed = CHECKSUM_UNNECESSARY;
-#endif
 
 #ifdef LOOPBACK_TSO
 	if (skb_is_gso(skb)) {
@@ -234,9 +169,7 @@ static void loopback_setup(struct net_device *dev)
 	dev->type		= ARPHRD_LOOPBACK;	/* 0x0001*/
 	dev->flags		= IFF_LOOPBACK;
 	dev->features 		= NETIF_F_SG | NETIF_F_FRAGLIST
-#ifdef LOOPBACK_TSO
 		| NETIF_F_TSO
-#endif
 		| NETIF_F_NO_CSUM
 		| NETIF_F_HIGHDMA
 		| NETIF_F_LLTX
diff --git a/drivers/net/lp486e.c b/drivers/net/lp486e.c
index 591a7e4220c7..83fa9d82a004 100644
--- a/drivers/net/lp486e.c
+++ b/drivers/net/lp486e.c
@@ -1272,8 +1272,6 @@ static void set_multicast_list(struct net_device *dev) {
 			return;
 		}
 		if (dev->mc_count == 0 && !(dev->flags & (IFF_PROMISC | IFF_ALLMULTI))) {
-			if (dev->flags & IFF_ALLMULTI)
-				dev->flags |= IFF_PROMISC;
 			lp->i596_config[8] &= ~0x01;
 		} else {
 			lp->i596_config[8] |= 0x01;
diff --git a/drivers/net/macb.c b/drivers/net/macb.c
index daba82bbcb56..84c77f1f9a5c 100644
--- a/drivers/net/macb.c
+++ b/drivers/net/macb.c
@@ -21,8 +21,8 @@
 #include <linux/platform_device.h>
 #include <linux/phy.h>
 
-#include <asm/arch/board.h>
-#include <asm/arch/cpu.h>
+#include <mach/board.h>
+#include <mach/cpu.h>
 
 #include "macb.h"
 
diff --git a/drivers/net/meth.c b/drivers/net/meth.c
index 4cb364e67dc6..0a97c26df6ab 100644
--- a/drivers/net/meth.c
+++ b/drivers/net/meth.c
@@ -100,7 +100,7 @@ static inline void load_eaddr(struct net_device *dev)
 	DPRINTK("Loading MAC Address: %s\n", print_mac(mac, dev->dev_addr));
 	macaddr = 0;
 	for (i = 0; i < 6; i++)
-		macaddr |= dev->dev_addr[i] << ((5 - i) * 8);
+		macaddr |= (u64)dev->dev_addr[i] << ((5 - i) * 8);
 
 	mace->eth.mac_addr = macaddr;
 }
diff --git a/drivers/net/mlx4/alloc.c b/drivers/net/mlx4/alloc.c
index f9d6b4dca180..096bca54bcf7 100644
--- a/drivers/net/mlx4/alloc.c
+++ b/drivers/net/mlx4/alloc.c
@@ -1,5 +1,6 @@
 /*
  * Copyright (c) 2006, 2007 Cisco Systems, Inc.  All rights reserved.
+ * Copyright (c) 2007, 2008 Mellanox Technologies. All rights reserved.
  *
  * This software is available to you under a choice of one of two
  * licenses.  You may choose to be licensed under the terms of the GNU
diff --git a/drivers/net/mlx4/catas.c b/drivers/net/mlx4/catas.c
index aa9528779044..f094ee00c416 100644
--- a/drivers/net/mlx4/catas.c
+++ b/drivers/net/mlx4/catas.c
@@ -1,5 +1,6 @@
 /*
  * Copyright (c) 2007 Cisco Systems, Inc. All rights reserved.
+ * Copyright (c) 2007, 2008 Mellanox Technologies. All rights reserved.
  *
  * This software is available to you under a choice of one of two
  * licenses.  You may choose to be licensed under the terms of the GNU
diff --git a/drivers/net/mlx4/cmd.c b/drivers/net/mlx4/cmd.c
index 04d5bc69a6f8..2845a0560b84 100644
--- a/drivers/net/mlx4/cmd.c
+++ b/drivers/net/mlx4/cmd.c
@@ -1,6 +1,6 @@
 /*
  * Copyright (c) 2004, 2005 Topspin Communications.  All rights reserved.
- * Copyright (c) 2005 Mellanox Technologies. All rights reserved.
+ * Copyright (c) 2005, 2006, 2007, 2008 Mellanox Technologies. All rights reserved.
  * Copyright (c) 2005, 2006, 2007 Cisco Systems, Inc.  All rights reserved.
  *
  * This software is available to you under a choice of one of two
diff --git a/drivers/net/mlx4/cq.c b/drivers/net/mlx4/cq.c
index 95e87a2f8896..9bb50e3f8974 100644
--- a/drivers/net/mlx4/cq.c
+++ b/drivers/net/mlx4/cq.c
@@ -2,7 +2,7 @@
  * Copyright (c) 2004, 2005 Topspin Communications.  All rights reserved.
  * Copyright (c) 2005 Sun Microsystems, Inc. All rights reserved.
  * Copyright (c) 2005, 2006, 2007 Cisco Systems, Inc. All rights reserved.
- * Copyright (c) 2005 Mellanox Technologies. All rights reserved.
+ * Copyright (c) 2005, 2006, 2007, 2008 Mellanox Technologies. All rights reserved.
  * Copyright (c) 2004 Voltaire, Inc. All rights reserved.
  *
  * This software is available to you under a choice of one of two
diff --git a/drivers/net/mlx4/eq.c b/drivers/net/mlx4/eq.c
index ea3a09aaa844..8a8b56135a58 100644
--- a/drivers/net/mlx4/eq.c
+++ b/drivers/net/mlx4/eq.c
@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2005 Mellanox Technologies. All rights reserved.
+ * Copyright (c) 2005, 2006, 2007, 2008 Mellanox Technologies. All rights reserved.
  * Copyright (c) 2005, 2006, 2007 Cisco Systems, Inc. All rights reserved.
  *
  * This software is available to you under a choice of one of two
@@ -526,7 +526,7 @@ int mlx4_map_eq_icm(struct mlx4_dev *dev, u64 icm_virt)
 		return -ENOMEM;
 	priv->eq_table.icm_dma  = pci_map_page(dev->pdev, priv->eq_table.icm_page, 0,
 					       PAGE_SIZE, PCI_DMA_BIDIRECTIONAL);
-	if (pci_dma_mapping_error(priv->eq_table.icm_dma)) {
+	if (pci_dma_mapping_error(dev->pdev, priv->eq_table.icm_dma)) {
 		__free_page(priv->eq_table.icm_page);
 		return -ENOMEM;
 	}
diff --git a/drivers/net/mlx4/fw.c b/drivers/net/mlx4/fw.c
index 57278224ba1e..7e32955da982 100644
--- a/drivers/net/mlx4/fw.c
+++ b/drivers/net/mlx4/fw.c
@@ -1,6 +1,6 @@
 /*
  * Copyright (c) 2004, 2005 Topspin Communications.  All rights reserved.
- * Copyright (c) 2005 Mellanox Technologies. All rights reserved.
+ * Copyright (c) 2005, 2006, 2007, 2008 Mellanox Technologies. All rights reserved.
  * Copyright (c) 2005, 2006, 2007 Cisco Systems, Inc.  All rights reserved.
  *
  * This software is available to you under a choice of one of two
diff --git a/drivers/net/mlx4/fw.h b/drivers/net/mlx4/fw.h
index fbf0e22be122..decbb5c2ad41 100644
--- a/drivers/net/mlx4/fw.h
+++ b/drivers/net/mlx4/fw.h
@@ -1,6 +1,6 @@
 /*
  * Copyright (c) 2004, 2005 Topspin Communications.  All rights reserved.
- * Copyright (c) 2005 Mellanox Technologies. All rights reserved.
+ * Copyright (c) 2005, 2006, 2007, 2008 Mellanox Technologies. All rights reserved.
  * Copyright (c) 2006, 2007 Cisco Systems.  All rights reserved.
  *
  * This software is available to you under a choice of one of two
diff --git a/drivers/net/mlx4/icm.c b/drivers/net/mlx4/icm.c
index 2a5bef6388fe..baf4bf66062c 100644
--- a/drivers/net/mlx4/icm.c
+++ b/drivers/net/mlx4/icm.c
@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2005 Mellanox Technologies. All rights reserved.
+ * Copyright (c) 2005, 2006, 2007, 2008 Mellanox Technologies. All rights reserved.
  * Copyright (c) 2006, 2007 Cisco Systems, Inc.  All rights reserved.
  *
  * This software is available to you under a choice of one of two
diff --git a/drivers/net/mlx4/icm.h b/drivers/net/mlx4/icm.h
index 6c44edf35847..ab56a2f89b65 100644
--- a/drivers/net/mlx4/icm.h
+++ b/drivers/net/mlx4/icm.h
@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2005 Mellanox Technologies. All rights reserved.
+ * Copyright (c) 2005, 2006, 2007, 2008 Mellanox Technologies. All rights reserved.
  * Copyright (c) 2006, 2007 Cisco Systems, Inc.  All rights reserved.
  *
  * This software is available to you under a choice of one of two
diff --git a/drivers/net/mlx4/intf.c b/drivers/net/mlx4/intf.c
index 4a6c4d526f1b..0e7eb1038f9f 100644
--- a/drivers/net/mlx4/intf.c
+++ b/drivers/net/mlx4/intf.c
@@ -1,5 +1,6 @@
 /*
  * Copyright (c) 2006, 2007 Cisco Systems, Inc. All rights reserved.
+ * Copyright (c) 2007, 2008 Mellanox Technologies. All rights reserved.
  *
  * This software is available to you under a choice of one of two
  * licenses.  You may choose to be licensed under the terms of the GNU
diff --git a/drivers/net/mlx4/main.c b/drivers/net/mlx4/main.c
index 8e1d24cda1b0..1252a919de2e 100644
--- a/drivers/net/mlx4/main.c
+++ b/drivers/net/mlx4/main.c
@@ -1,7 +1,7 @@
 /*
  * Copyright (c) 2004, 2005 Topspin Communications.  All rights reserved.
  * Copyright (c) 2005 Sun Microsystems, Inc. All rights reserved.
- * Copyright (c) 2005 Mellanox Technologies. All rights reserved.
+ * Copyright (c) 2005, 2006, 2007, 2008 Mellanox Technologies. All rights reserved.
  * Copyright (c) 2006, 2007 Cisco Systems, Inc. All rights reserved.
  *
  * This software is available to you under a choice of one of two
diff --git a/drivers/net/mlx4/mcg.c b/drivers/net/mlx4/mcg.c
index b4b57870ddfd..c83f88ce0736 100644
--- a/drivers/net/mlx4/mcg.c
+++ b/drivers/net/mlx4/mcg.c
@@ -1,5 +1,6 @@
 /*
  * Copyright (c) 2006, 2007 Cisco Systems, Inc.  All rights reserved.
+ * Copyright (c) 2007, 2008 Mellanox Technologies. All rights reserved.
  *
  * This software is available to you under a choice of one of two
  * licenses.  You may choose to be licensed under the terms of the GNU
diff --git a/drivers/net/mlx4/mlx4.h b/drivers/net/mlx4/mlx4.h
index 78038499cff5..5337e3ac3e78 100644
--- a/drivers/net/mlx4/mlx4.h
+++ b/drivers/net/mlx4/mlx4.h
@@ -2,7 +2,7 @@
  * Copyright (c) 2004, 2005 Topspin Communications.  All rights reserved.
  * Copyright (c) 2005 Sun Microsystems, Inc. All rights reserved.
  * Copyright (c) 2005, 2006, 2007 Cisco Systems.  All rights reserved.
- * Copyright (c) 2005 Mellanox Technologies. All rights reserved.
+ * Copyright (c) 2005, 2006, 2007, 2008 Mellanox Technologies. All rights reserved.
  * Copyright (c) 2004 Voltaire, Inc. All rights reserved.
  *
  * This software is available to you under a choice of one of two
diff --git a/drivers/net/mlx4/mr.c b/drivers/net/mlx4/mr.c
index a3c04c5f12c2..62071d9c4a55 100644
--- a/drivers/net/mlx4/mr.c
+++ b/drivers/net/mlx4/mr.c
@@ -1,6 +1,6 @@
 /*
  * Copyright (c) 2004 Topspin Communications.  All rights reserved.
- * Copyright (c) 2005 Mellanox Technologies. All rights reserved.
+ * Copyright (c) 2005, 2006, 2007, 2008 Mellanox Technologies. All rights reserved.
  * Copyright (c) 2006, 2007 Cisco Systems, Inc.  All rights reserved.
  *
  * This software is available to you under a choice of one of two
diff --git a/drivers/net/mlx4/qp.c b/drivers/net/mlx4/qp.c
index ee5484c44a18..c49a86044bf7 100644
--- a/drivers/net/mlx4/qp.c
+++ b/drivers/net/mlx4/qp.c
@@ -1,7 +1,7 @@
 /*
  * Copyright (c) 2004 Topspin Communications.  All rights reserved.
  * Copyright (c) 2005, 2006, 2007 Cisco Systems, Inc. All rights reserved.
- * Copyright (c) 2005 Mellanox Technologies. All rights reserved.
+ * Copyright (c) 2005, 2006, 2007, 2008 Mellanox Technologies. All rights reserved.
  * Copyright (c) 2004 Voltaire, Inc. All rights reserved.
  *
  * This software is available to you under a choice of one of two
diff --git a/drivers/net/mlx4/reset.c b/drivers/net/mlx4/reset.c
index e199715fabd0..3951b884c0fb 100644
--- a/drivers/net/mlx4/reset.c
+++ b/drivers/net/mlx4/reset.c
@@ -1,5 +1,6 @@
 /*
  * Copyright (c) 2006, 2007 Cisco Systems, Inc.  All rights reserved.
+ * Copyright (c) 2007, 2008 Mellanox Technologies. All rights reserved.
  *
  * This software is available to you under a choice of one of two
  * licenses.  You may choose to be licensed under the terms of the GNU
diff --git a/drivers/net/mlx4/srq.c b/drivers/net/mlx4/srq.c
index d23f46d692ef..533eb6db24b3 100644
--- a/drivers/net/mlx4/srq.c
+++ b/drivers/net/mlx4/srq.c
@@ -1,5 +1,6 @@
 /*
  * Copyright (c) 2006, 2007 Cisco Systems, Inc. All rights reserved.
+ * Copyright (c) 2007, 2008 Mellanox Technologies. All rights reserved.
  *
  * This software is available to you under a choice of one of two
  * licenses.  You may choose to be licensed under the terms of the GNU
diff --git a/drivers/net/mv643xx_eth.c b/drivers/net/mv643xx_eth.c
index 8a97a0066a88..0a18b9e96da1 100644
--- a/drivers/net/mv643xx_eth.c
+++ b/drivers/net/mv643xx_eth.c
@@ -55,7 +55,7 @@
 #include <asm/system.h>
 
 static char mv643xx_eth_driver_name[] = "mv643xx_eth";
-static char mv643xx_eth_driver_version[] = "1.1";
+static char mv643xx_eth_driver_version[] = "1.3";
 
 #define MV643XX_ETH_CHECKSUM_OFFLOAD_TX
 #define MV643XX_ETH_NAPI
@@ -90,12 +90,21 @@ static char mv643xx_eth_driver_version[] = "1.1";
 #define PORT_SERIAL_CONTROL(p)		(0x043c + ((p) << 10))
 #define PORT_STATUS(p)			(0x0444 + ((p) << 10))
 #define  TX_FIFO_EMPTY			0x00000400
+#define  TX_IN_PROGRESS			0x00000080
+#define  PORT_SPEED_MASK		0x00000030
+#define  PORT_SPEED_1000		0x00000010
+#define  PORT_SPEED_100			0x00000020
+#define  PORT_SPEED_10			0x00000000
+#define  FLOW_CONTROL_ENABLED		0x00000008
+#define  FULL_DUPLEX			0x00000004
+#define  LINK_UP			0x00000002
 #define TXQ_COMMAND(p)			(0x0448 + ((p) << 10))
 #define TXQ_FIX_PRIO_CONF(p)		(0x044c + ((p) << 10))
 #define TX_BW_RATE(p)			(0x0450 + ((p) << 10))
 #define TX_BW_MTU(p)			(0x0458 + ((p) << 10))
 #define TX_BW_BURST(p)			(0x045c + ((p) << 10))
 #define INT_CAUSE(p)			(0x0460 + ((p) << 10))
+#define  INT_TX_END_0			0x00080000
 #define  INT_TX_END			0x07f80000
 #define  INT_RX				0x0007fbfc
 #define  INT_EXT			0x00000002
@@ -127,21 +136,21 @@ static char mv643xx_eth_driver_version[] = "1.1";
 /*
  * SDMA configuration register.
  */
-#define RX_BURST_SIZE_4_64BIT		(2 << 1)
+#define RX_BURST_SIZE_16_64BIT		(4 << 1)
 #define BLM_RX_NO_SWAP			(1 << 4)
 #define BLM_TX_NO_SWAP			(1 << 5)
-#define TX_BURST_SIZE_4_64BIT		(2 << 22)
+#define TX_BURST_SIZE_16_64BIT		(4 << 22)
 
 #if defined(__BIG_ENDIAN)
 #define PORT_SDMA_CONFIG_DEFAULT_VALUE		\
-		RX_BURST_SIZE_4_64BIT	|	\
-		TX_BURST_SIZE_4_64BIT
+		RX_BURST_SIZE_16_64BIT	|	\
+		TX_BURST_SIZE_16_64BIT
 #elif defined(__LITTLE_ENDIAN)
 #define PORT_SDMA_CONFIG_DEFAULT_VALUE		\
-		RX_BURST_SIZE_4_64BIT	|	\
+		RX_BURST_SIZE_16_64BIT	|	\
 		BLM_RX_NO_SWAP		|	\
 		BLM_TX_NO_SWAP		|	\
-		TX_BURST_SIZE_4_64BIT
+		TX_BURST_SIZE_16_64BIT
 #else
 #error One of __BIG_ENDIAN or __LITTLE_ENDIAN must be defined
 #endif
@@ -153,9 +162,7 @@ static char mv643xx_eth_driver_version[] = "1.1";
 #define SET_MII_SPEED_TO_100			(1 << 24)
 #define SET_GMII_SPEED_TO_1000			(1 << 23)
 #define SET_FULL_DUPLEX_MODE			(1 << 21)
-#define MAX_RX_PACKET_1522BYTE			(1 << 17)
 #define MAX_RX_PACKET_9700BYTE			(5 << 17)
-#define MAX_RX_PACKET_MASK			(7 << 17)
 #define DISABLE_AUTO_NEG_SPEED_GMII		(1 << 13)
 #define DO_NOT_FORCE_LINK_FAIL			(1 << 10)
 #define SERIAL_PORT_CONTROL_RESERVED		(1 << 9)
@@ -228,6 +235,8 @@ struct tx_desc {
 #define GEN_IP_V4_CHECKSUM		0x00040000
 #define GEN_TCP_UDP_CHECKSUM		0x00020000
 #define UDP_FRAME			0x00010000
+#define MAC_HDR_EXTRA_4_BYTES		0x00008000
+#define MAC_HDR_EXTRA_8_BYTES		0x00000200
 
 #define TX_IHL_SHIFT			11
 
@@ -404,6 +413,17 @@ static void rxq_disable(struct rx_queue *rxq)
 		udelay(10);
 }
 
+static void txq_reset_hw_ptr(struct tx_queue *txq)
+{
+	struct mv643xx_eth_private *mp = txq_to_mp(txq);
+	int off = TXQ_CURRENT_DESC_PTR(mp->port_num, txq->index);
+	u32 addr;
+
+	addr = (u32)txq->tx_desc_dma;
+	addr += txq->tx_curr_desc * sizeof(struct tx_desc);
+	wrl(mp, off, addr);
+}
+
 static void txq_enable(struct tx_queue *txq)
 {
 	struct mv643xx_eth_private *mp = txq_to_mp(txq);
@@ -454,11 +474,19 @@ static void rxq_refill(struct rx_queue *rxq)
 		/*
 		 * Reserve 2+14 bytes for an ethernet header (the
 		 * hardware automatically prepends 2 bytes of dummy
-		 * data to each received packet), 4 bytes for a VLAN
-		 * header, and 4 bytes for the trailing FCS -- 24
-		 * bytes total.
+		 * data to each received packet), 16 bytes for up to
+		 * four VLAN tags, and 4 bytes for the trailing FCS
+		 * -- 36 bytes total.
+		 */
+		skb_size = mp->dev->mtu + 36;
+
+		/*
+		 * Make sure that the skb size is a multiple of 8
+		 * bytes, as the lower three bits of the receive
+		 * descriptor's buffer size field are ignored by
+		 * the hardware.
 		 */
-		skb_size = mp->dev->mtu + 24;
+		skb_size = (skb_size + 7) & ~7;
 
 		skb = dev_alloc_skb(skb_size + dma_get_cache_alignment() - 1);
 		if (skb == NULL)
@@ -489,10 +517,8 @@ static void rxq_refill(struct rx_queue *rxq)
 		skb_reserve(skb, 2);
 	}
 
-	if (rxq->rx_desc_count != rxq->rx_ring_size) {
-		rxq->rx_oom.expires = jiffies + (HZ / 10);
-		add_timer(&rxq->rx_oom);
-	}
+	if (rxq->rx_desc_count != rxq->rx_ring_size)
+		mod_timer(&rxq->rx_oom, jiffies + (HZ / 10));
 
 	spin_unlock_irqrestore(&mp->lock, flags);
 }
@@ -509,7 +535,7 @@ static int rxq_process(struct rx_queue *rxq, int budget)
 	int rx;
 
 	rx = 0;
-	while (rx < budget) {
+	while (rx < budget && rxq->rx_desc_count) {
 		struct rx_desc *rx_desc;
 		unsigned int cmd_sts;
 		struct sk_buff *skb;
@@ -534,7 +560,7 @@ static int rxq_process(struct rx_queue *rxq, int budget)
 		spin_unlock_irqrestore(&mp->lock, flags);
 
 		dma_unmap_single(NULL, rx_desc->buf_ptr + 2,
-				 mp->dev->mtu + 24, DMA_FROM_DEVICE);
+				 rx_desc->buf_size, DMA_FROM_DEVICE);
 		rxq->rx_desc_count--;
 		rx++;
 
@@ -614,6 +640,12 @@ static int mv643xx_eth_poll(struct napi_struct *napi, int budget)
 		for (i = 0; i < 8; i++)
 			if (mp->txq_mask & (1 << i))
 				txq_reclaim(mp->txq + i, 0);
+
+		if (netif_carrier_ok(mp->dev)) {
+			spin_lock_irq(&mp->lock);
+			__txq_maybe_wake(mp->txq + mp->txq_primary);
+			spin_unlock_irq(&mp->lock);
+		}
 	}
 #endif
 
@@ -624,8 +656,6 @@ static int mv643xx_eth_poll(struct napi_struct *napi, int budget)
 
 	if (rx < budget) {
 		netif_rx_complete(mp->dev, napi);
-		wrl(mp, INT_CAUSE(mp->port_num), 0);
-		wrl(mp, INT_CAUSE_EXT(mp->port_num), 0);
 		wrl(mp, INT_MASK(mp->port_num), INT_TX_END | INT_RX | INT_EXT);
 	}
 
@@ -706,6 +736,7 @@ static inline __be16 sum16_as_be(__sum16 sum)
 
 static void txq_submit_skb(struct tx_queue *txq, struct sk_buff *skb)
 {
+	struct mv643xx_eth_private *mp = txq_to_mp(txq);
 	int nr_frags = skb_shinfo(skb)->nr_frags;
 	int tx_index;
 	struct tx_desc *desc;
@@ -732,12 +763,36 @@ static void txq_submit_skb(struct tx_queue *txq, struct sk_buff *skb)
 	desc->buf_ptr = dma_map_single(NULL, skb->data, length, DMA_TO_DEVICE);
 
 	if (skb->ip_summed == CHECKSUM_PARTIAL) {
-		BUG_ON(skb->protocol != htons(ETH_P_IP));
+		int mac_hdr_len;
+
+		BUG_ON(skb->protocol != htons(ETH_P_IP) &&
+		       skb->protocol != htons(ETH_P_8021Q));
 
 		cmd_sts |= GEN_TCP_UDP_CHECKSUM |
 			   GEN_IP_V4_CHECKSUM   |
 			   ip_hdr(skb)->ihl << TX_IHL_SHIFT;
 
+		mac_hdr_len = (void *)ip_hdr(skb) - (void *)skb->data;
+		switch (mac_hdr_len - ETH_HLEN) {
+		case 0:
+			break;
+		case 4:
+			cmd_sts |= MAC_HDR_EXTRA_4_BYTES;
+			break;
+		case 8:
+			cmd_sts |= MAC_HDR_EXTRA_8_BYTES;
+			break;
+		case 12:
+			cmd_sts |= MAC_HDR_EXTRA_4_BYTES;
+			cmd_sts |= MAC_HDR_EXTRA_8_BYTES;
+			break;
+		default:
+			if (net_ratelimit())
+				dev_printk(KERN_ERR, &txq_to_mp(txq)->dev->dev,
+				   "mac header length is %d?!\n", mac_hdr_len);
+			break;
+		}
+
 		switch (ip_hdr(skb)->protocol) {
 		case IPPROTO_UDP:
 			cmd_sts |= UDP_FRAME;
@@ -759,6 +814,10 @@ static void txq_submit_skb(struct tx_queue *txq, struct sk_buff *skb)
 	wmb();
 	desc->cmd_sts = cmd_sts;
 
+	/* clear TX_END interrupt status */
+	wrl(mp, INT_CAUSE(mp->port_num), ~(INT_TX_END_0 << txq->index));
+	rdl(mp, INT_CAUSE(mp->port_num));
+
 	/* ensure all descriptors are written before poking hardware */
 	wmb();
 	txq_enable(txq);
@@ -1112,10 +1171,28 @@ static int mv643xx_eth_get_settings(struct net_device *dev, struct ethtool_cmd *
 
 static int mv643xx_eth_get_settings_phyless(struct net_device *dev, struct ethtool_cmd *cmd)
 {
+	struct mv643xx_eth_private *mp = netdev_priv(dev);
+	u32 port_status;
+
+	port_status = rdl(mp, PORT_STATUS(mp->port_num));
+
 	cmd->supported = SUPPORTED_MII;
 	cmd->advertising = ADVERTISED_MII;
-	cmd->speed = SPEED_1000;
-	cmd->duplex = DUPLEX_FULL;
+	switch (port_status & PORT_SPEED_MASK) {
+	case PORT_SPEED_10:
+		cmd->speed = SPEED_10;
+		break;
+	case PORT_SPEED_100:
+		cmd->speed = SPEED_100;
+		break;
+	case PORT_SPEED_1000:
+		cmd->speed = SPEED_1000;
+		break;
+	default:
+		cmd->speed = -1;
+		break;
+	}
+	cmd->duplex = (port_status & FULL_DUPLEX) ? DUPLEX_FULL : DUPLEX_HALF;
 	cmd->port = PORT_MII;
 	cmd->phy_address = 0;
 	cmd->transceiver = XCVR_INTERNAL;
@@ -1539,8 +1616,11 @@ static int txq_init(struct mv643xx_eth_private *mp, int index)
 
 	tx_desc = (struct tx_desc *)txq->tx_desc_area;
 	for (i = 0; i < txq->tx_ring_size; i++) {
+		struct tx_desc *txd = tx_desc + i;
 		int nexti = (i + 1) % txq->tx_ring_size;
-		tx_desc[i].next_desc_ptr = txq->tx_desc_dma +
+
+		txd->cmd_sts = 0;
+		txd->next_desc_ptr = txq->tx_desc_dma +
 					nexti * sizeof(struct tx_desc);
 	}
 
@@ -1577,8 +1657,11 @@ static void txq_reclaim(struct tx_queue *txq, int force)
 		desc = &txq->tx_desc_area[tx_index];
 		cmd_sts = desc->cmd_sts;
 
-		if (!force && (cmd_sts & BUFFER_OWNED_BY_DMA))
-			break;
+		if (cmd_sts & BUFFER_OWNED_BY_DMA) {
+			if (!force)
+				break;
+			desc->cmd_sts = cmd_sts & ~BUFFER_OWNED_BY_DMA;
+		}
 
 		txq->tx_used_desc = (tx_index + 1) % txq->tx_ring_size;
 		txq->tx_desc_count--;
@@ -1632,49 +1715,61 @@ static void txq_deinit(struct tx_queue *txq)
 
 
 /* netdev ops and related ***************************************************/
-static void update_pscr(struct mv643xx_eth_private *mp, int speed, int duplex)
+static void handle_link_event(struct mv643xx_eth_private *mp)
 {
-	u32 pscr_o;
-	u32 pscr_n;
-
-	pscr_o = rdl(mp, PORT_SERIAL_CONTROL(mp->port_num));
+	struct net_device *dev = mp->dev;
+	u32 port_status;
+	int speed;
+	int duplex;
+	int fc;
+
+	port_status = rdl(mp, PORT_STATUS(mp->port_num));
+	if (!(port_status & LINK_UP)) {
+		if (netif_carrier_ok(dev)) {
+			int i;
 
-	/* clear speed, duplex and rx buffer size fields */
-	pscr_n = pscr_o & ~(SET_MII_SPEED_TO_100   |
-			    SET_GMII_SPEED_TO_1000 |
-			    SET_FULL_DUPLEX_MODE   |
-			    MAX_RX_PACKET_MASK);
+			printk(KERN_INFO "%s: link down\n", dev->name);
 
-	if (speed == SPEED_1000) {
-		pscr_n |= SET_GMII_SPEED_TO_1000 | MAX_RX_PACKET_9700BYTE;
-	} else {
-		if (speed == SPEED_100)
-			pscr_n |= SET_MII_SPEED_TO_100;
-		pscr_n |= MAX_RX_PACKET_1522BYTE;
-	}
+			netif_carrier_off(dev);
+			netif_stop_queue(dev);
 
-	if (duplex == DUPLEX_FULL)
-		pscr_n |= SET_FULL_DUPLEX_MODE;
+			for (i = 0; i < 8; i++) {
+				struct tx_queue *txq = mp->txq + i;
 
-	if (pscr_n != pscr_o) {
-		if ((pscr_o & SERIAL_PORT_ENABLE) == 0)
-			wrl(mp, PORT_SERIAL_CONTROL(mp->port_num), pscr_n);
-		else {
-			int i;
+				if (mp->txq_mask & (1 << i)) {
+					txq_reclaim(txq, 1);
+					txq_reset_hw_ptr(txq);
+				}
+			}
+		}
+		return;
+	}
 
-			for (i = 0; i < 8; i++)
-				if (mp->txq_mask & (1 << i))
-					txq_disable(mp->txq + i);
+	switch (port_status & PORT_SPEED_MASK) {
+	case PORT_SPEED_10:
+		speed = 10;
+		break;
+	case PORT_SPEED_100:
+		speed = 100;
+		break;
+	case PORT_SPEED_1000:
+		speed = 1000;
+		break;
+	default:
+		speed = -1;
+		break;
+	}
+	duplex = (port_status & FULL_DUPLEX) ? 1 : 0;
+	fc = (port_status & FLOW_CONTROL_ENABLED) ? 1 : 0;
 
-			pscr_o &= ~SERIAL_PORT_ENABLE;
-			wrl(mp, PORT_SERIAL_CONTROL(mp->port_num), pscr_o);
-			wrl(mp, PORT_SERIAL_CONTROL(mp->port_num), pscr_n);
-			wrl(mp, PORT_SERIAL_CONTROL(mp->port_num), pscr_n);
+	printk(KERN_INFO "%s: link up, %d Mb/s, %s duplex, "
+			 "flow control %sabled\n", dev->name,
+			 speed, duplex ? "full" : "half",
+			 fc ? "en" : "dis");
 
-			for (i = 0; i < 8; i++)
-				if (mp->txq_mask & (1 << i))
-					txq_enable(mp->txq + i);
-		}
+	if (!netif_carrier_ok(dev)) {
+		netif_carrier_on(dev);
+		netif_wake_queue(dev);
 	}
 }
 
@@ -1684,7 +1779,6 @@ static irqreturn_t mv643xx_eth_irq(int irq, void *dev_id)
 	struct mv643xx_eth_private *mp = netdev_priv(dev);
 	u32 int_cause;
 	u32 int_cause_ext;
-	u32 txq_active;
 
 	int_cause = rdl(mp, INT_CAUSE(mp->port_num)) &
 			(INT_TX_END | INT_RX | INT_EXT);
@@ -1698,36 +1792,15 @@ static irqreturn_t mv643xx_eth_irq(int irq, void *dev_id)
 		wrl(mp, INT_CAUSE_EXT(mp->port_num), ~int_cause_ext);
 	}
 
-	if (int_cause_ext & (INT_EXT_PHY | INT_EXT_LINK)) {
-		if (mp->phy_addr == -1 || mii_link_ok(&mp->mii)) {
-			int i;
-
-			if (mp->phy_addr != -1) {
-				struct ethtool_cmd cmd;
-
-				mii_ethtool_gset(&mp->mii, &cmd);
-				update_pscr(mp, cmd.speed, cmd.duplex);
-			}
-
-			for (i = 0; i < 8; i++)
-				if (mp->txq_mask & (1 << i))
-					txq_enable(mp->txq + i);
-
-			if (!netif_carrier_ok(dev)) {
-				netif_carrier_on(dev);
-				__txq_maybe_wake(mp->txq + mp->txq_primary);
-			}
-		} else if (netif_carrier_ok(dev)) {
-			netif_stop_queue(dev);
-			netif_carrier_off(dev);
-		}
-	}
+	if (int_cause_ext & (INT_EXT_PHY | INT_EXT_LINK))
+		handle_link_event(mp);
 
 	/*
 	 * RxBuffer or RxError set for any of the 8 queues?
 	 */
 #ifdef MV643XX_ETH_NAPI
 	if (int_cause & INT_RX) {
+		wrl(mp, INT_CAUSE(mp->port_num), ~(int_cause & INT_RX));
 		wrl(mp, INT_MASK(mp->port_num), 0x00000000);
 		rdl(mp, INT_MASK(mp->port_num));
 
@@ -1743,8 +1816,6 @@ static irqreturn_t mv643xx_eth_irq(int irq, void *dev_id)
 	}
 #endif
 
-	txq_active = rdl(mp, TXQ_COMMAND(mp->port_num));
-
 	/*
 	 * TxBuffer or TxError set for any of the 8 queues?
 	 */
@@ -1754,6 +1825,16 @@ static irqreturn_t mv643xx_eth_irq(int irq, void *dev_id)
 		for (i = 0; i < 8; i++)
 			if (mp->txq_mask & (1 << i))
 				txq_reclaim(mp->txq + i, 0);
+
+		/*
+		 * Enough space again in the primary TX queue for a
+		 * full packet?
+		 */
+		if (netif_carrier_ok(dev)) {
+			spin_lock(&mp->lock);
+			__txq_maybe_wake(mp->txq + mp->txq_primary);
+			spin_unlock(&mp->lock);
+		}
 	}
 
 	/*
@@ -1763,19 +1844,25 @@ static irqreturn_t mv643xx_eth_irq(int irq, void *dev_id)
 		int i;
 
 		wrl(mp, INT_CAUSE(mp->port_num), ~(int_cause & INT_TX_END));
+
+		spin_lock(&mp->lock);
 		for (i = 0; i < 8; i++) {
 			struct tx_queue *txq = mp->txq + i;
-			if (txq->tx_desc_count && !((txq_active >> i) & 1))
+			u32 hw_desc_ptr;
+			u32 expected_ptr;
+
+			if ((int_cause & (INT_TX_END_0 << i)) == 0)
+				continue;
+
+			hw_desc_ptr =
+				rdl(mp, TXQ_CURRENT_DESC_PTR(mp->port_num, i));
+			expected_ptr = (u32)txq->tx_desc_dma +
+				txq->tx_curr_desc * sizeof(struct tx_desc);
+
+			if (hw_desc_ptr != expected_ptr)
 				txq_enable(txq);
 		}
-	}
-
-	/*
-	 * Enough space again in the primary TX queue for a full packet?
-	 */
-	if (int_cause_ext & INT_EXT_TX) {
-		struct tx_queue *txq = mp->txq + mp->txq_primary;
-		__txq_maybe_wake(txq);
+		spin_unlock(&mp->lock);
 	}
 
 	return IRQ_HANDLED;
@@ -1785,14 +1872,14 @@ static void phy_reset(struct mv643xx_eth_private *mp)
 {
 	unsigned int data;
 
-	smi_reg_read(mp, mp->phy_addr, 0, &data);
-	data |= 0x8000;
-	smi_reg_write(mp, mp->phy_addr, 0, data);
+	smi_reg_read(mp, mp->phy_addr, MII_BMCR, &data);
+	data |= BMCR_RESET;
+	smi_reg_write(mp, mp->phy_addr, MII_BMCR, data);
 
 	do {
 		udelay(1);
-		smi_reg_read(mp, mp->phy_addr, 0, &data);
-	} while (data & 0x8000);
+		smi_reg_read(mp, mp->phy_addr, MII_BMCR, &data);
+	} while (data & BMCR_RESET);
 }
 
 static void port_start(struct mv643xx_eth_private *mp)
@@ -1801,23 +1888,6 @@ static void port_start(struct mv643xx_eth_private *mp)
 	int i;
 
 	/*
-	 * Configure basic link parameters.
-	 */
-	pscr = rdl(mp, PORT_SERIAL_CONTROL(mp->port_num));
-	pscr &= ~(SERIAL_PORT_ENABLE | FORCE_LINK_PASS);
-	wrl(mp, PORT_SERIAL_CONTROL(mp->port_num), pscr);
-	pscr |= DISABLE_AUTO_NEG_FOR_FLOW_CTRL |
-		DISABLE_AUTO_NEG_SPEED_GMII    |
-		DISABLE_AUTO_NEG_FOR_DUPLEX    |
-		DO_NOT_FORCE_LINK_FAIL	       |
-		SERIAL_PORT_CONTROL_RESERVED;
-	wrl(mp, PORT_SERIAL_CONTROL(mp->port_num), pscr);
-	pscr |= SERIAL_PORT_ENABLE;
-	wrl(mp, PORT_SERIAL_CONTROL(mp->port_num), pscr);
-
-	wrl(mp, SDMA_CONFIG(mp->port_num), PORT_SDMA_CONFIG_DEFAULT_VALUE);
-
-	/*
 	 * Perform PHY reset, if there is a PHY.
 	 */
 	if (mp->phy_addr != -1) {
@@ -1829,21 +1899,31 @@ static void port_start(struct mv643xx_eth_private *mp)
 	}
 
 	/*
+	 * Configure basic link parameters.
+	 */
+	pscr = rdl(mp, PORT_SERIAL_CONTROL(mp->port_num));
+
+	pscr |= SERIAL_PORT_ENABLE;
+	wrl(mp, PORT_SERIAL_CONTROL(mp->port_num), pscr);
+
+	pscr |= DO_NOT_FORCE_LINK_FAIL;
+	if (mp->phy_addr == -1)
+		pscr |= FORCE_LINK_PASS;
+	wrl(mp, PORT_SERIAL_CONTROL(mp->port_num), pscr);
+
+	wrl(mp, SDMA_CONFIG(mp->port_num), PORT_SDMA_CONFIG_DEFAULT_VALUE);
+
+	/*
 	 * Configure TX path and queues.
 	 */
 	tx_set_rate(mp, 1000000000, 16777216);
 	for (i = 0; i < 8; i++) {
 		struct tx_queue *txq = mp->txq + i;
-		int off = TXQ_CURRENT_DESC_PTR(mp->port_num, i);
-		u32 addr;
 
 		if ((mp->txq_mask & (1 << i)) == 0)
 			continue;
 
-		addr = (u32)txq->tx_desc_dma;
-		addr += txq->tx_curr_desc * sizeof(struct tx_desc);
-		wrl(mp, off, addr);
-
+		txq_reset_hw_ptr(txq);
 		txq_set_rate(txq, 1000000000, 16777216);
 		txq_set_fixed_prio_mode(txq);
 	}
@@ -1965,6 +2045,9 @@ static int mv643xx_eth_open(struct net_device *dev)
 	napi_enable(&mp->napi);
 #endif
 
+	netif_carrier_off(dev);
+	netif_stop_queue(dev);
+
 	port_start(mp);
 
 	set_rx_coal(mp, 0);
@@ -1999,8 +2082,14 @@ static void port_reset(struct mv643xx_eth_private *mp)
 		if (mp->txq_mask & (1 << i))
 			txq_disable(mp->txq + i);
 	}
-	while (!(rdl(mp, PORT_STATUS(mp->port_num)) & TX_FIFO_EMPTY))
+
+	while (1) {
+		u32 ps = rdl(mp, PORT_STATUS(mp->port_num));
+
+		if ((ps & (TX_IN_PROGRESS | TX_FIFO_EMPTY)) == TX_FIFO_EMPTY)
+			break;
 		udelay(10);
+	}
 
 	/* Reset the Enable bit in the Configuration Register */
 	data = rdl(mp, PORT_SERIAL_CONTROL(mp->port_num));
@@ -2202,7 +2291,8 @@ static int mv643xx_eth_shared_probe(struct platform_device *pdev)
 	int ret;
 
 	if (!mv643xx_eth_version_printed++)
-		printk(KERN_NOTICE "MV-643xx 10/100/1000 Ethernet Driver\n");
+		printk(KERN_NOTICE "MV-643xx 10/100/1000 ethernet "
+			"driver version %s\n", mv643xx_eth_driver_version);
 
 	ret = -EINVAL;
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
@@ -2338,14 +2428,14 @@ static int phy_detect(struct mv643xx_eth_private *mp)
 	unsigned int data;
 	unsigned int data2;
 
-	smi_reg_read(mp, mp->phy_addr, 0, &data);
-	smi_reg_write(mp, mp->phy_addr, 0, data ^ 0x1000);
+	smi_reg_read(mp, mp->phy_addr, MII_BMCR, &data);
+	smi_reg_write(mp, mp->phy_addr, MII_BMCR, data ^ BMCR_ANENABLE);
 
-	smi_reg_read(mp, mp->phy_addr, 0, &data2);
-	if (((data ^ data2) & 0x1000) == 0)
+	smi_reg_read(mp, mp->phy_addr, MII_BMCR, &data2);
+	if (((data ^ data2) & BMCR_ANENABLE) == 0)
 		return -ENODEV;
 
-	smi_reg_write(mp, mp->phy_addr, 0, data);
+	smi_reg_write(mp, mp->phy_addr, MII_BMCR, data);
 
 	return 0;
 }
@@ -2393,12 +2483,39 @@ static int phy_init(struct mv643xx_eth_private *mp,
 		cmd.duplex = pd->duplex;
 	}
 
-	update_pscr(mp, cmd.speed, cmd.duplex);
 	mv643xx_eth_set_settings(mp->dev, &cmd);
 
 	return 0;
 }
 
+static void init_pscr(struct mv643xx_eth_private *mp, int speed, int duplex)
+{
+	u32 pscr;
+
+	pscr = rdl(mp, PORT_SERIAL_CONTROL(mp->port_num));
+	if (pscr & SERIAL_PORT_ENABLE) {
+		pscr &= ~SERIAL_PORT_ENABLE;
+		wrl(mp, PORT_SERIAL_CONTROL(mp->port_num), pscr);
+	}
+
+	pscr = MAX_RX_PACKET_9700BYTE | SERIAL_PORT_CONTROL_RESERVED;
+	if (mp->phy_addr == -1) {
+		pscr |= DISABLE_AUTO_NEG_SPEED_GMII;
+		if (speed == SPEED_1000)
+			pscr |= SET_GMII_SPEED_TO_1000;
+		else if (speed == SPEED_100)
+			pscr |= SET_MII_SPEED_TO_100;
+
+		pscr |= DISABLE_AUTO_NEG_FOR_FLOW_CTRL;
+
+		pscr |= DISABLE_AUTO_NEG_FOR_DUPLEX;
+		if (duplex == DUPLEX_FULL)
+			pscr |= SET_FULL_DUPLEX_MODE;
+	}
+
+	wrl(mp, PORT_SERIAL_CONTROL(mp->port_num), pscr);
+}
+
 static int mv643xx_eth_probe(struct platform_device *pdev)
 {
 	struct mv643xx_eth_platform_data *pd;
@@ -2452,6 +2569,7 @@ static int mv643xx_eth_probe(struct platform_device *pdev)
 	} else {
 		SET_ETHTOOL_OPS(dev, &mv643xx_eth_ethtool_ops_phyless);
 	}
+	init_pscr(mp, pd->speed, pd->duplex);
 
 
 	res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
@@ -2478,6 +2596,7 @@ static int mv643xx_eth_probe(struct platform_device *pdev)
 	 * have to map the buffers to ISA memory which is only 16 MB
 	 */
 	dev->features = NETIF_F_SG | NETIF_F_IP_CSUM;
+	dev->vlan_features = NETIF_F_SG | NETIF_F_IP_CSUM;
 #endif
 
 	SET_NETDEV_DEV(dev, &pdev->dev);
diff --git a/drivers/net/myri10ge/myri10ge.c b/drivers/net/myri10ge/myri10ge.c
index 3ab0e5289f7a..d6524db321af 100644
--- a/drivers/net/myri10ge/myri10ge.c
+++ b/drivers/net/myri10ge/myri10ge.c
@@ -56,7 +56,6 @@
 #include <linux/ethtool.h>
 #include <linux/firmware.h>
 #include <linux/delay.h>
-#include <linux/version.h>
 #include <linux/timer.h>
 #include <linux/vmalloc.h>
 #include <linux/crc32.h>
@@ -76,7 +75,7 @@
 #include "myri10ge_mcp.h"
 #include "myri10ge_mcp_gen_header.h"
 
-#define MYRI10GE_VERSION_STR "1.3.99-1.347"
+#define MYRI10GE_VERSION_STR "1.4.3-1.358"
 
 MODULE_DESCRIPTION("Myricom 10G driver (10GbE)");
 MODULE_AUTHOR("Maintainer: help@myri.com");
@@ -3548,7 +3547,11 @@ static void myri10ge_probe_slices(struct myri10ge_priv *mgp)
 
 	/* try to load the slice aware rss firmware */
 	old_fw = mgp->fw_name;
-	if (old_fw == myri10ge_fw_aligned)
+	if (myri10ge_fw_name != NULL) {
+		dev_info(&mgp->pdev->dev, "overriding rss firmware to %s\n",
+			 myri10ge_fw_name);
+		mgp->fw_name = myri10ge_fw_name;
+	} else if (old_fw == myri10ge_fw_aligned)
 		mgp->fw_name = myri10ge_fw_rss_aligned;
 	else
 		mgp->fw_name = myri10ge_fw_rss_unaligned;
@@ -3699,6 +3702,7 @@ static int myri10ge_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 		dev_err(&pdev->dev, "Error %d setting DMA mask\n", status);
 		goto abort_with_netdev;
 	}
+	(void)pci_set_consistent_dma_mask(pdev, DMA_64BIT_MASK);
 	mgp->cmd = dma_alloc_coherent(&pdev->dev, sizeof(*mgp->cmd),
 				      &mgp->cmd_bus, GFP_KERNEL);
 	if (mgp->cmd == NULL)
diff --git a/drivers/net/myri10ge/myri10ge_mcp.h b/drivers/net/myri10ge/myri10ge_mcp.h
index fdbeeee07372..993721090777 100644
--- a/drivers/net/myri10ge/myri10ge_mcp.h
+++ b/drivers/net/myri10ge/myri10ge_mcp.h
@@ -101,6 +101,8 @@ struct mcp_kreq_ether_recv {
 #define	MXGEFW_ETH_SEND_3	0x2c0000
 #define	MXGEFW_ETH_RECV_SMALL	0x300000
 #define	MXGEFW_ETH_RECV_BIG	0x340000
+#define	MXGEFW_ETH_SEND_GO	0x380000
+#define	MXGEFW_ETH_SEND_STOP	0x3C0000
 
 #define	MXGEFW_ETH_SEND(n)		(0x200000 + (((n) & 0x03) * 0x40000))
 #define	MXGEFW_ETH_SEND_OFFSET(n)	(MXGEFW_ETH_SEND(n) - MXGEFW_ETH_SEND_4)
@@ -120,6 +122,11 @@ enum myri10ge_mcp_cmd_type {
 	 * MXGEFW_CMD_RESET is issued */
 
 	MXGEFW_CMD_SET_INTRQ_DMA,
+	/* data0 = LSW of the host address
+	 * data1 = MSW of the host address
+	 * data2 = slice number if multiple slices are used
+	 */
+
 	MXGEFW_CMD_SET_BIG_BUFFER_SIZE,	/* in bytes, power of 2 */
 	MXGEFW_CMD_SET_SMALL_BUFFER_SIZE,	/* in bytes */
 
@@ -129,6 +136,8 @@ enum myri10ge_mcp_cmd_type {
 	MXGEFW_CMD_GET_SEND_OFFSET,
 	MXGEFW_CMD_GET_SMALL_RX_OFFSET,
 	MXGEFW_CMD_GET_BIG_RX_OFFSET,
+	/* data0 = slice number if multiple slices are used */
+
 	MXGEFW_CMD_GET_IRQ_ACK_OFFSET,
 	MXGEFW_CMD_GET_IRQ_DEASSERT_OFFSET,
 
@@ -200,7 +209,12 @@ enum myri10ge_mcp_cmd_type {
 	MXGEFW_CMD_SET_STATS_DMA_V2,
 	/* data0, data1 = bus addr,
 	 * data2 = sizeof(struct mcp_irq_data) from driver point of view, allows
-	 * adding new stuff to mcp_irq_data without changing the ABI */
+	 * adding new stuff to mcp_irq_data without changing the ABI
+	 *
+	 * If multiple slices are used, data2 contains both the size of the
+	 * structure (in the lower 16 bits) and the slice number
+	 * (in the upper 16 bits).
+	 */
 
 	MXGEFW_CMD_UNALIGNED_TEST,
 	/* same than DMA_TEST (same args) but abort with UNALIGNED on unaligned
@@ -222,13 +236,18 @@ enum myri10ge_mcp_cmd_type {
 	MXGEFW_CMD_GET_MAX_RSS_QUEUES,
 	MXGEFW_CMD_ENABLE_RSS_QUEUES,
 	/* data0 = number of slices n (0, 1, ..., n-1) to enable
-	 * data1 = interrupt mode.
-	 * 0=share one INTx/MSI, 1=use one MSI-X per queue.
+	 * data1 = interrupt mode | use of multiple transmit queues.
+	 * 0=share one INTx/MSI.
+	 * 1=use one MSI-X per queue.
 	 * If all queues share one interrupt, the driver must have set
 	 * RSS_SHARED_INTERRUPT_DMA before enabling queues.
+	 * 2=enable both receive and send queues.
+	 * Without this bit set, only one send queue (slice 0's send queue)
+	 * is enabled.  The receive queues are always enabled.
 	 */
-#define MXGEFW_SLICE_INTR_MODE_SHARED 0
-#define MXGEFW_SLICE_INTR_MODE_ONE_PER_SLICE 1
+#define MXGEFW_SLICE_INTR_MODE_SHARED          0x0
+#define MXGEFW_SLICE_INTR_MODE_ONE_PER_SLICE   0x1
+#define MXGEFW_SLICE_ENABLE_MULTIPLE_TX_QUEUES 0x2
 
 	MXGEFW_CMD_GET_RSS_SHARED_INTERRUPT_MASK_OFFSET,
 	MXGEFW_CMD_SET_RSS_SHARED_INTERRUPT_DMA,
@@ -250,10 +269,13 @@ enum myri10ge_mcp_cmd_type {
 	 * 2: TCP_IPV4        (required by RSS)
 	 * 3: IPV4 | TCP_IPV4 (required by RSS)
 	 * 4: source port
+	 * 5: source port + destination port
 	 */
 #define MXGEFW_RSS_HASH_TYPE_IPV4      0x1
 #define MXGEFW_RSS_HASH_TYPE_TCP_IPV4  0x2
 #define MXGEFW_RSS_HASH_TYPE_SRC_PORT  0x4
+#define MXGEFW_RSS_HASH_TYPE_SRC_DST_PORT 0x5
+#define MXGEFW_RSS_HASH_TYPE_MAX 0x5
 
 	MXGEFW_CMD_GET_MAX_TSO6_HDR_SIZE,
 	/* Return data = the max. size of the entire headers of a IPv6 TSO packet.
@@ -329,6 +351,20 @@ enum myri10ge_mcp_cmd_type {
 
 	MXGEFW_CMD_GET_DCA_OFFSET,
 	/* offset of dca control for WDMAs */
+
+	/* VMWare NetQueue commands */
+	MXGEFW_CMD_NETQ_GET_FILTERS_PER_QUEUE,
+	MXGEFW_CMD_NETQ_ADD_FILTER,
+	/* data0 = filter_id << 16 | queue << 8 | type */
+	/* data1 = MS4 of MAC Addr */
+	/* data2 = LS2_MAC << 16 | VLAN_tag */
+	MXGEFW_CMD_NETQ_DEL_FILTER,
+	/* data0 = filter_id */
+	MXGEFW_CMD_NETQ_QUERY1,
+	MXGEFW_CMD_NETQ_QUERY2,
+	MXGEFW_CMD_NETQ_QUERY3,
+	MXGEFW_CMD_NETQ_QUERY4,
+
 };
 
 enum myri10ge_mcp_cmd_status {
@@ -381,4 +417,10 @@ struct mcp_irq_data {
 	u8 valid;
 };
 
+/* definitions for NETQ filter type */
+#define MXGEFW_NETQ_FILTERTYPE_NONE 0
+#define MXGEFW_NETQ_FILTERTYPE_MACADDR 1
+#define MXGEFW_NETQ_FILTERTYPE_VLAN 2
+#define MXGEFW_NETQ_FILTERTYPE_VLANMACADDR 3
+
 #endif				/* __MYRI10GE_MCP_H__ */
diff --git a/drivers/net/myri10ge/myri10ge_mcp_gen_header.h b/drivers/net/myri10ge/myri10ge_mcp_gen_header.h
index 07d65c2cbb24..a8662ea8079a 100644
--- a/drivers/net/myri10ge/myri10ge_mcp_gen_header.h
+++ b/drivers/net/myri10ge/myri10ge_mcp_gen_header.h
@@ -35,7 +35,7 @@ struct mcp_gen_header {
 	unsigned char mcp_index;
 	unsigned char disable_rabbit;
 	unsigned char unaligned_tlp;
-	unsigned char pad1;
+	unsigned char pcie_link_algo;
 	unsigned counters_addr;
 	unsigned copy_block_info;	/* for small mcps loaded with "lload -d" */
 	unsigned short handoff_id_major;	/* must be equal */
diff --git a/drivers/net/ne.c b/drivers/net/ne.c
index 2fec6122c7fa..fa3ceca4e15c 100644
--- a/drivers/net/ne.c
+++ b/drivers/net/ne.c
@@ -118,7 +118,7 @@ bad_clone_list[] __initdata = {
     {"E-LAN100", "E-LAN200", {0x00, 0x00, 0x5d}}, /* Broken ne1000 clones */
     {"PCM-4823", "PCM-4823", {0x00, 0xc0, 0x6c}}, /* Broken Advantech MoBo */
     {"REALTEK", "RTL8019", {0x00, 0x00, 0xe8}}, /* no-name with Realtek chip */
-#if defined(CONFIG_TOSHIBA_RBTX4927) || defined(CONFIG_TOSHIBA_RBTX4938)
+#ifdef CONFIG_MACH_TX49XX
     {"RBHMA4X00-RTL8019", "RBHMA4X00/RTL8019", {0x00, 0x60, 0x0a}},  /* Toshiba built-in */
 #endif
     {"LCS-8834", "LCS-8836", {0x04, 0x04, 0x37}}, /* ShinyNet (SET) */
@@ -142,7 +142,7 @@ bad_clone_list[] __initdata = {
 #if defined(CONFIG_PLAT_MAPPI)
 #  define DCR_VAL 0x4b
 #elif defined(CONFIG_PLAT_OAKS32R)  || \
-   defined(CONFIG_TOSHIBA_RBTX4927) || defined(CONFIG_TOSHIBA_RBTX4938)
+   defined(CONFIG_MACH_TX49XX)
 #  define DCR_VAL 0x48		/* 8-bit mode */
 #else
 #  define DCR_VAL 0x49
@@ -536,7 +536,7 @@ static int __init ne_probe1(struct net_device *dev, unsigned long ioaddr)
 #ifdef CONFIG_NET_POLL_CONTROLLER
 	dev->poll_controller = eip_poll;
 #endif
-	NS8390_init(dev, 0);
+	NS8390p_init(dev, 0);
 
 	ret = register_netdev(dev);
 	if (ret)
@@ -794,7 +794,7 @@ retry:
 		if (time_after(jiffies, dma_start + 2*HZ/100)) {		/* 20ms */
 			printk(KERN_WARNING "%s: timeout waiting for Tx RDC.\n", dev->name);
 			ne_reset_8390(dev);
-			NS8390_init(dev,1);
+			NS8390p_init(dev, 1);
 			break;
 		}
 
@@ -855,7 +855,7 @@ static int ne_drv_resume(struct platform_device *pdev)
 
 	if (netif_running(dev)) {
 		ne_reset_8390(dev);
-		NS8390_init(dev, 1);
+		NS8390p_init(dev, 1);
 		netif_device_attach(dev);
 	}
 	return 0;
diff --git a/drivers/net/netconsole.c b/drivers/net/netconsole.c
index e13966bb5f77..9681618c3232 100644
--- a/drivers/net/netconsole.c
+++ b/drivers/net/netconsole.c
@@ -53,7 +53,7 @@ MODULE_LICENSE("GPL");
 
 static char config[MAX_PARAM_LENGTH];
 module_param_string(netconsole, config, MAX_PARAM_LENGTH, 0);
-MODULE_PARM_DESC(netconsole, " netconsole=[src-port]@[src-ip]/[dev],[tgt-port]@<tgt-ip>/[tgt-macaddr]\n");
+MODULE_PARM_DESC(netconsole, " netconsole=[src-port]@[src-ip]/[dev],[tgt-port]@<tgt-ip>/[tgt-macaddr]");
 
 #ifndef	MODULE
 static int __init option_setup(char *opt)
diff --git a/drivers/net/netx-eth.c b/drivers/net/netx-eth.c
index dc442e370850..3f9af759cb90 100644
--- a/drivers/net/netx-eth.c
+++ b/drivers/net/netx-eth.c
@@ -29,12 +29,11 @@
 #include <linux/mii.h>
 
 #include <asm/io.h>
-#include <asm/hardware.h>
-#include <asm/arch/hardware.h>
-#include <asm/arch/netx-regs.h>
-#include <asm/arch/pfifo.h>
-#include <asm/arch/xc.h>
-#include <asm/arch/eth.h>
+#include <mach/hardware.h>
+#include <mach/netx-regs.h>
+#include <mach/pfifo.h>
+#include <mach/xc.h>
+#include <mach/eth.h>
 
 /* XC Fifo Offsets */
 #define EMPTY_PTR_FIFO(xcno)    (0 + ((xcno) << 3))	/* Index of the empty pointer FIFO */
diff --git a/drivers/net/netxen/netxen_nic.h b/drivers/net/netxen/netxen_nic.h
index 8e736614407d..244ab49c4337 100644
--- a/drivers/net/netxen/netxen_nic.h
+++ b/drivers/net/netxen/netxen_nic.h
@@ -45,7 +45,6 @@
 #include <linux/in.h>
 #include <linux/tcp.h>
 #include <linux/skbuff.h>
-#include <linux/version.h>
 
 #include <linux/ethtool.h>
 #include <linux/mii.h>
@@ -66,8 +65,8 @@
 
 #define _NETXEN_NIC_LINUX_MAJOR 4
 #define _NETXEN_NIC_LINUX_MINOR 0
-#define _NETXEN_NIC_LINUX_SUBVERSION 0
-#define NETXEN_NIC_LINUX_VERSIONID  "4.0.0"
+#define _NETXEN_NIC_LINUX_SUBVERSION 11
+#define NETXEN_NIC_LINUX_VERSIONID  "4.0.11"
 
 #define NETXEN_VERSION_CODE(a, b, c)	(((a) << 16) + ((b) << 8) + (c))
 
@@ -508,6 +507,8 @@ typedef enum {
 	NETXEN_BRDTYPE_P3_10000_BASE_T = 0x0027,
 	NETXEN_BRDTYPE_P3_XG_LOM = 0x0028,
 	NETXEN_BRDTYPE_P3_4_GB_MM = 0x0029,
+	NETXEN_BRDTYPE_P3_10G_SFP_CT = 0x002a,
+	NETXEN_BRDTYPE_P3_10G_SFP_QT = 0x002b,
 	NETXEN_BRDTYPE_P3_10G_CX4 = 0x0031,
 	NETXEN_BRDTYPE_P3_10G_XFP = 0x0032
 
@@ -1170,6 +1171,36 @@ typedef struct {
 	nx_nic_intr_coalesce_data_t	irq;
 } nx_nic_intr_coalesce_t;
 
+#define NX_HOST_REQUEST		0x13
+#define NX_NIC_REQUEST		0x14
+
+#define NX_MAC_EVENT		0x1
+
+enum {
+	NX_NIC_H2C_OPCODE_START = 0,
+	NX_NIC_H2C_OPCODE_CONFIG_RSS,
+	NX_NIC_H2C_OPCODE_CONFIG_RSS_TBL,
+	NX_NIC_H2C_OPCODE_CONFIG_INTR_COALESCE,
+	NX_NIC_H2C_OPCODE_CONFIG_LED,
+	NX_NIC_H2C_OPCODE_CONFIG_PROMISCUOUS,
+	NX_NIC_H2C_OPCODE_CONFIG_L2_MAC,
+	NX_NIC_H2C_OPCODE_LRO_REQUEST,
+	NX_NIC_H2C_OPCODE_GET_SNMP_STATS,
+	NX_NIC_H2C_OPCODE_PROXY_START_REQUEST,
+	NX_NIC_H2C_OPCODE_PROXY_STOP_REQUEST,
+	NX_NIC_H2C_OPCODE_PROXY_SET_MTU,
+	NX_NIC_H2C_OPCODE_PROXY_SET_VPORT_MISS_MODE,
+	NX_H2P_OPCODE_GET_FINGER_PRINT_REQUEST,
+	NX_H2P_OPCODE_INSTALL_LICENSE_REQUEST,
+	NX_H2P_OPCODE_GET_LICENSE_CAPABILITY_REQUEST,
+	NX_NIC_H2C_OPCODE_GET_NET_STATS,
+	NX_NIC_H2C_OPCODE_LAST
+};
+
+#define VPORT_MISS_MODE_DROP		0 /* drop all unmatched */
+#define VPORT_MISS_MODE_ACCEPT_ALL	1 /* accept all packets */
+#define VPORT_MISS_MODE_ACCEPT_MULTI	2 /* accept unmatched multicast */
+
 typedef struct {
 	u64 qhdr;
 	u64 req_hdr;
@@ -1288,7 +1319,7 @@ struct netxen_adapter {
 	int (*disable_phy_interrupts) (struct netxen_adapter *);
 	int (*macaddr_set) (struct netxen_adapter *, netxen_ethernet_macaddr_t);
 	int (*set_mtu) (struct netxen_adapter *, int);
-	int (*set_promisc) (struct netxen_adapter *, netxen_niu_prom_mode_t);
+	int (*set_promisc) (struct netxen_adapter *, u32);
 	int (*phy_read) (struct netxen_adapter *, long reg, u32 *);
 	int (*phy_write) (struct netxen_adapter *, long reg, u32 val);
 	int (*init_port) (struct netxen_adapter *, int);
@@ -1465,9 +1496,10 @@ int netxen_process_cmd_ring(struct netxen_adapter *adapter);
 u32 netxen_process_rcv_ring(struct netxen_adapter *adapter, int ctx, int max);
 void netxen_p2_nic_set_multi(struct net_device *netdev);
 void netxen_p3_nic_set_multi(struct net_device *netdev);
+int netxen_p3_nic_set_promisc(struct netxen_adapter *adapter, u32);
 int netxen_config_intr_coalesce(struct netxen_adapter *adapter);
 
-u32 nx_fw_cmd_set_mtu(struct netxen_adapter *adapter, u32 mtu);
+int nx_fw_cmd_set_mtu(struct netxen_adapter *adapter, int mtu);
 int netxen_nic_change_mtu(struct net_device *netdev, int new_mtu);
 
 int netxen_nic_set_mac(struct net_device *netdev, void *p);
@@ -1502,7 +1534,9 @@ static const struct netxen_brdinfo netxen_boards[] = {
 	{NETXEN_BRDTYPE_P3_10G_SFP_PLUS, 2, "Dual XGb SFP+ LP"},
 	{NETXEN_BRDTYPE_P3_10000_BASE_T, 1, "XGB 10G BaseT LP"},
 	{NETXEN_BRDTYPE_P3_XG_LOM,  2, "Dual XGb LOM"},
-	{NETXEN_BRDTYPE_P3_4_GB_MM, 4, "Quad GB - March Madness"},
+	{NETXEN_BRDTYPE_P3_4_GB_MM, 4, "NX3031 Gigabit Ethernet"},
+	{NETXEN_BRDTYPE_P3_10G_SFP_CT, 2, "NX3031 10 Gigabit Ethernet"},
+	{NETXEN_BRDTYPE_P3_10G_SFP_QT, 2, "Quanta Dual XGb SFP+"},
 	{NETXEN_BRDTYPE_P3_10G_CX4, 2, "Reference Dual CX4 Option"},
 	{NETXEN_BRDTYPE_P3_10G_XFP, 1, "Reference Single XFP Option"}
 };
@@ -1580,7 +1614,8 @@ dma_watchdog_wakeup(struct netxen_adapter *adapter)
 
 
 int netxen_is_flash_supported(struct netxen_adapter *adapter);
-int netxen_get_flash_mac_addr(struct netxen_adapter *adapter, __le64 mac[]);
+int netxen_get_flash_mac_addr(struct netxen_adapter *adapter, __le64 *mac);
+int netxen_p3_get_mac_addr(struct netxen_adapter *adapter, __le64 *mac);
 extern void netxen_change_ringparam(struct netxen_adapter *adapter);
 extern int netxen_rom_fast_read(struct netxen_adapter *adapter, int addr,
 				int *valp);
diff --git a/drivers/net/netxen/netxen_nic_ctx.c b/drivers/net/netxen/netxen_nic_ctx.c
index 64babc59e699..64b51643c626 100644
--- a/drivers/net/netxen/netxen_nic_ctx.c
+++ b/drivers/net/netxen/netxen_nic_ctx.c
@@ -145,8 +145,8 @@ netxen_issue_cmd(struct netxen_adapter *adapter,
 	return rcode;
 }
 
-u32
-nx_fw_cmd_set_mtu(struct netxen_adapter *adapter, u32 mtu)
+int
+nx_fw_cmd_set_mtu(struct netxen_adapter *adapter, int mtu)
 {
 	u32 rcode = NX_RCODE_SUCCESS;
 	struct netxen_recv_context *recv_ctx = &adapter->recv_ctx[0];
@@ -160,7 +160,10 @@ nx_fw_cmd_set_mtu(struct netxen_adapter *adapter, u32 mtu)
 				0,
 				NX_CDRP_CMD_SET_MTU);
 
-	return rcode;
+	if (rcode != NX_RCODE_SUCCESS)
+		return -EIO;
+
+	return 0;
 }
 
 static int
diff --git a/drivers/net/netxen/netxen_nic_ethtool.c b/drivers/net/netxen/netxen_nic_ethtool.c
index 48ee06b6f4e9..b974ca0fc530 100644
--- a/drivers/net/netxen/netxen_nic_ethtool.c
+++ b/drivers/net/netxen/netxen_nic_ethtool.c
@@ -38,7 +38,6 @@
 #include <asm/io.h>
 #include <linux/netdevice.h>
 #include <linux/ethtool.h>
-#include <linux/version.h>
 
 #include "netxen_nic.h"
 #include "netxen_nic_hw.h"
@@ -140,18 +139,33 @@ netxen_nic_get_settings(struct net_device *dev, struct ethtool_cmd *ecmd)
 		if (netif_running(dev)) {
 			ecmd->speed = adapter->link_speed;
 			ecmd->duplex = adapter->link_duplex;
-		} else
-			return -EIO;	/* link absent */
+			ecmd->autoneg = adapter->link_autoneg;
+		}
+
 	} else if (adapter->ahw.board_type == NETXEN_NIC_XGBE) {
-		ecmd->supported = (SUPPORTED_TP |
-				   SUPPORTED_1000baseT_Full |
-				   SUPPORTED_10000baseT_Full);
-		ecmd->advertising = (ADVERTISED_TP |
-				     ADVERTISED_1000baseT_Full |
-				     ADVERTISED_10000baseT_Full);
+		u32 val;
+
+		adapter->hw_read_wx(adapter, NETXEN_PORT_MODE_ADDR, &val, 4);
+		if (val == NETXEN_PORT_MODE_802_3_AP) {
+			ecmd->supported = SUPPORTED_1000baseT_Full;
+			ecmd->advertising = ADVERTISED_1000baseT_Full;
+		} else {
+			ecmd->supported = SUPPORTED_10000baseT_Full;
+			ecmd->advertising = ADVERTISED_10000baseT_Full;
+		}
+
 		ecmd->port = PORT_TP;
 
-		ecmd->speed = SPEED_10000;
+		if (NX_IS_REVISION_P3(adapter->ahw.revision_id)) {
+			u16 pcifn = adapter->ahw.pci_func;
+
+			adapter->hw_read_wx(adapter,
+				P3_LINK_SPEED_REG(pcifn), &val, 4);
+			ecmd->speed = P3_LINK_SPEED_MHZ *
+					P3_LINK_SPEED_VAL(pcifn, val);
+		} else
+			ecmd->speed = SPEED_10000;
+
 		ecmd->duplex = DUPLEX_FULL;
 		ecmd->autoneg = AUTONEG_DISABLE;
 	} else
@@ -192,6 +206,8 @@ netxen_nic_get_settings(struct net_device *dev, struct ethtool_cmd *ecmd)
 		break;
 	case NETXEN_BRDTYPE_P2_SB31_10G:
 	case NETXEN_BRDTYPE_P3_10G_SFP_PLUS:
+	case NETXEN_BRDTYPE_P3_10G_SFP_CT:
+	case NETXEN_BRDTYPE_P3_10G_SFP_QT:
 	case NETXEN_BRDTYPE_P3_10G_XFP:
 		ecmd->supported |= SUPPORTED_FIBRE;
 		ecmd->advertising |= ADVERTISED_FIBRE;
diff --git a/drivers/net/netxen/netxen_nic_hdr.h b/drivers/net/netxen/netxen_nic_hdr.h
index 3ce13e451aac..e80f9e3e5973 100644
--- a/drivers/net/netxen/netxen_nic_hdr.h
+++ b/drivers/net/netxen/netxen_nic_hdr.h
@@ -32,8 +32,6 @@
 
 #include <linux/module.h>
 #include <linux/kernel.h>
-#include <linux/version.h>
-
 #include <linux/spinlock.h>
 #include <asm/irq.h>
 #include <linux/init.h>
@@ -724,6 +722,13 @@ enum {
 #define XG_LINK_STATE_P3(pcifn,val) \
 	(((val) >> ((pcifn) * 4)) & XG_LINK_STATE_P3_MASK)
 
+#define P3_LINK_SPEED_MHZ	100
+#define P3_LINK_SPEED_MASK	0xff
+#define P3_LINK_SPEED_REG(pcifn)	\
+	(CRB_PF_LINK_SPEED_1 + (((pcifn) / 4) * 4))
+#define P3_LINK_SPEED_VAL(pcifn, reg)	\
+	(((reg) >> (8 * ((pcifn) & 0x3))) & P3_LINK_SPEED_MASK)
+
 #define NETXEN_CAM_RAM_BASE	(NETXEN_CRB_CAM + 0x02000)
 #define NETXEN_CAM_RAM(reg)	(NETXEN_CAM_RAM_BASE + (reg))
 #define NETXEN_FW_VERSION_MAJOR (NETXEN_CAM_RAM(0x150))
@@ -836,9 +841,11 @@ enum {
 
 #define PCIE_SETUP_FUNCTION	(0x12040)
 #define PCIE_SETUP_FUNCTION2	(0x12048)
+#define PCIE_MISCCFG_RC         (0x1206c)
 #define PCIE_TGT_SPLIT_CHICKEN	(0x12080)
 #define PCIE_CHICKEN3		(0x120c8)
 
+#define ISR_INT_STATE_REG       (NETXEN_PCIX_PS_REG(PCIE_MISCCFG_RC))
 #define PCIE_MAX_MASTER_SPLIT	(0x14048)
 
 #define NETXEN_PORT_MODE_NONE		0
@@ -854,6 +861,7 @@ enum {
 #define NETXEN_CAM_RAM_DMA_WATCHDOG_CTRL		(0x14)
 
 #define	ISR_MSI_INT_TRIGGER(FUNC) (NETXEN_PCIX_PS_REG(PCIX_MSI_F(FUNC)))
+#define ISR_LEGACY_INT_TRIGGERED(VAL)	(((VAL) & 0x300) == 0x200)
 
 /*
  * PCI Interrupt Vector Values.
diff --git a/drivers/net/netxen/netxen_nic_hw.c b/drivers/net/netxen/netxen_nic_hw.c
index 96a3bc6426e2..84978f80f396 100644
--- a/drivers/net/netxen/netxen_nic_hw.c
+++ b/drivers/net/netxen/netxen_nic_hw.c
@@ -285,14 +285,7 @@ static unsigned crb_hub_agt[64] =
 #define ADDR_IN_RANGE(addr, low, high)	\
 	(((addr) <= (high)) && ((addr) >= (low)))
 
-#define NETXEN_MAX_MTU		8000 + NETXEN_ENET_HEADER_SIZE + NETXEN_ETH_FCS_SIZE
-#define NETXEN_MIN_MTU		64
-#define NETXEN_ETH_FCS_SIZE     4
-#define NETXEN_ENET_HEADER_SIZE 14
 #define NETXEN_WINDOW_ONE 	0x2000000 /*CRB Window: bit 25 of CRB address */
-#define NETXEN_FIRMWARE_LEN 	((16 * 1024) / 4)
-#define NETXEN_NIU_HDRSIZE	(0x1 << 6)
-#define NETXEN_NIU_TLRSIZE	(0x1 << 5)
 
 #define NETXEN_NIC_ZERO_PAUSE_ADDR     0ULL
 #define NETXEN_NIC_UNIT_PAUSE_ADDR     0x200ULL
@@ -541,9 +534,6 @@ netxen_send_cmd_descs(struct netxen_adapter *adapter,
 	return 0;
 }
 
-#define NIC_REQUEST		0x14
-#define NETXEN_MAC_EVENT	0x1
-
 static int nx_p3_sre_macaddr_change(struct net_device *dev,
 		u8 *addr, unsigned op)
 {
@@ -553,8 +543,8 @@ static int nx_p3_sre_macaddr_change(struct net_device *dev,
 	int rv;
 
 	memset(&req, 0, sizeof(nx_nic_req_t));
-	req.qhdr |= (NIC_REQUEST << 23);
-	req.req_hdr |= NETXEN_MAC_EVENT;
+	req.qhdr |= (NX_NIC_REQUEST << 23);
+	req.req_hdr |= NX_MAC_EVENT;
 	req.req_hdr |= ((u64)adapter->portnum << 16);
 	mac_req.op = op;
 	memcpy(&mac_req.mac_addr, addr, 6);
@@ -575,31 +565,35 @@ void netxen_p3_nic_set_multi(struct net_device *netdev)
 	nx_mac_list_t *cur, *next, *del_list, *add_list = NULL;
 	struct dev_mc_list *mc_ptr;
 	u8 bcast_addr[ETH_ALEN] = { 0xff, 0xff, 0xff, 0xff, 0xff, 0xff };
-
-	adapter->set_promisc(adapter, NETXEN_NIU_PROMISC_MODE);
-
-	/*
-	 * Programming mac addresses will automaticly enabling L2 filtering.
-	 * HW will replace timestamp with L2 conid when L2 filtering is
-	 * enabled. This causes problem for LSA. Do not enabling L2 filtering
-	 * until that problem is fixed.
-	 */
-	if ((netdev->flags & IFF_PROMISC) ||
-			(netdev->mc_count > adapter->max_mc_count))
-		return;
+	u32 mode = VPORT_MISS_MODE_DROP;
 
 	del_list = adapter->mac_list;
 	adapter->mac_list = NULL;
 
 	nx_p3_nic_add_mac(adapter, netdev->dev_addr, &add_list, &del_list);
+	nx_p3_nic_add_mac(adapter, bcast_addr, &add_list, &del_list);
+
+	if (netdev->flags & IFF_PROMISC) {
+		mode = VPORT_MISS_MODE_ACCEPT_ALL;
+		goto send_fw_cmd;
+	}
+
+	if ((netdev->flags & IFF_ALLMULTI) ||
+			(netdev->mc_count > adapter->max_mc_count)) {
+		mode = VPORT_MISS_MODE_ACCEPT_MULTI;
+		goto send_fw_cmd;
+	}
+
 	if (netdev->mc_count > 0) {
-		nx_p3_nic_add_mac(adapter, bcast_addr, &add_list, &del_list);
 		for (mc_ptr = netdev->mc_list; mc_ptr;
 		     mc_ptr = mc_ptr->next) {
 			nx_p3_nic_add_mac(adapter, mc_ptr->dmi_addr,
 					  &add_list, &del_list);
 		}
 	}
+
+send_fw_cmd:
+	adapter->set_promisc(adapter, mode);
 	for (cur = del_list; cur;) {
 		nx_p3_sre_macaddr_change(netdev, cur->mac_addr, NETXEN_MAC_DEL);
 		next = cur->next;
@@ -615,6 +609,21 @@ void netxen_p3_nic_set_multi(struct net_device *netdev)
 	}
 }
 
+int netxen_p3_nic_set_promisc(struct netxen_adapter *adapter, u32 mode)
+{
+	nx_nic_req_t req;
+
+	memset(&req, 0, sizeof(nx_nic_req_t));
+
+	req.qhdr |= (NX_HOST_REQUEST << 23);
+	req.req_hdr |= NX_NIC_H2C_OPCODE_PROXY_SET_VPORT_MISS_MODE;
+	req.req_hdr |= ((u64)adapter->portnum << 16);
+	req.words[0] = cpu_to_le64(mode);
+
+	return netxen_send_cmd_descs(adapter,
+				(struct cmd_desc_type0 *)&req, 1);
+}
+
 #define	NETXEN_CONFIG_INTR_COALESCE	3
 
 /*
@@ -627,7 +636,7 @@ int netxen_config_intr_coalesce(struct netxen_adapter *adapter)
 
 	memset(&req, 0, sizeof(nx_nic_req_t));
 
-	req.qhdr |= (NIC_REQUEST << 23);
+	req.qhdr |= (NX_NIC_REQUEST << 23);
 	req.req_hdr |= NETXEN_CONFIG_INTR_COALESCE;
 	req.req_hdr |= ((u64)adapter->portnum << 16);
 
@@ -653,6 +662,7 @@ int netxen_nic_change_mtu(struct net_device *netdev, int mtu)
 {
 	struct netxen_adapter *adapter = netdev_priv(netdev);
 	int max_mtu;
+	int rc = 0;
 
 	if (NX_IS_REVISION_P3(adapter->ahw.revision_id))
 		max_mtu = P3_MAX_MTU;
@@ -666,16 +676,12 @@ int netxen_nic_change_mtu(struct net_device *netdev, int mtu)
 	}
 
 	if (adapter->set_mtu)
-		adapter->set_mtu(adapter, mtu);
-	netdev->mtu = mtu;
+		rc = adapter->set_mtu(adapter, mtu);
 
-	mtu += MTU_FUDGE_FACTOR;
-	if (NX_IS_REVISION_P3(adapter->ahw.revision_id))
-		nx_fw_cmd_set_mtu(adapter, mtu);
-	else if (adapter->set_mtu)
-		adapter->set_mtu(adapter, mtu);
+	if (!rc)
+		netdev->mtu = mtu;
 
-	return 0;
+	return rc;
 }
 
 int netxen_is_flash_supported(struct netxen_adapter *adapter)
@@ -727,31 +733,56 @@ static int netxen_get_flash_block(struct netxen_adapter *adapter, int base,
 	return 0;
 }
 
-int netxen_get_flash_mac_addr(struct netxen_adapter *adapter, __le64 mac[])
+int netxen_get_flash_mac_addr(struct netxen_adapter *adapter, __le64 *mac)
 {
-	__le32 *pmac = (__le32 *) & mac[0];
+	__le32 *pmac = (__le32 *) mac;
+	u32 offset;
+
+	offset = NETXEN_USER_START +
+		offsetof(struct netxen_new_user_info, mac_addr) +
+		adapter->portnum * sizeof(u64);
 
-	if (netxen_get_flash_block(adapter,
-				   NETXEN_USER_START +
-				   offsetof(struct netxen_new_user_info,
-					    mac_addr),
-				   FLASH_NUM_PORTS * sizeof(u64), pmac) == -1) {
+	if (netxen_get_flash_block(adapter, offset, sizeof(u64), pmac) == -1)
 		return -1;
-	}
+
 	if (*mac == cpu_to_le64(~0ULL)) {
+
+		offset = NETXEN_USER_START_OLD +
+			offsetof(struct netxen_user_old_info, mac_addr) +
+			adapter->portnum * sizeof(u64);
+
 		if (netxen_get_flash_block(adapter,
-					   NETXEN_USER_START_OLD +
-					   offsetof(struct netxen_user_old_info,
-						    mac_addr),
-					   FLASH_NUM_PORTS * sizeof(u64),
-					   pmac) == -1)
+					offset, sizeof(u64), pmac) == -1)
 			return -1;
+
 		if (*mac == cpu_to_le64(~0ULL))
 			return -1;
 	}
 	return 0;
 }
 
+int netxen_p3_get_mac_addr(struct netxen_adapter *adapter, __le64 *mac)
+{
+	uint32_t crbaddr, mac_hi, mac_lo;
+	int pci_func = adapter->ahw.pci_func;
+
+	crbaddr = CRB_MAC_BLOCK_START +
+		(4 * ((pci_func/2) * 3)) + (4 * (pci_func & 1));
+
+	adapter->hw_read_wx(adapter, crbaddr, &mac_lo, 4);
+	adapter->hw_read_wx(adapter, crbaddr+4, &mac_hi, 4);
+
+	mac_hi = cpu_to_le32(mac_hi);
+	mac_lo = cpu_to_le32(mac_lo);
+
+	if (pci_func & 1)
+		*mac = ((mac_lo >> 16) | ((u64)mac_hi << 16));
+	else
+		*mac = ((mac_lo) | ((u64)mac_hi << 32));
+
+	return 0;
+}
+
 #define CRB_WIN_LOCK_TIMEOUT 100000000
 
 static int crb_win_lock(struct netxen_adapter *adapter)
@@ -1411,7 +1442,8 @@ static int netxen_nic_pci_mem_read_direct(struct netxen_adapter *adapter,
 		(netxen_nic_pci_is_same_window(adapter, off+size-1) == 0)) {
 		write_unlock_irqrestore(&adapter->adapter_lock, flags);
 		printk(KERN_ERR "%s out of bound pci memory access. "
-			"offset is 0x%llx\n", netxen_nic_driver_name, off);
+			"offset is 0x%llx\n", netxen_nic_driver_name,
+			(unsigned long long)off);
 		return -1;
 	}
 
@@ -1484,7 +1516,8 @@ netxen_nic_pci_mem_write_direct(struct netxen_adapter *adapter, u64 off,
 		(netxen_nic_pci_is_same_window(adapter, off+size-1) == 0)) {
 		write_unlock_irqrestore(&adapter->adapter_lock, flags);
 		printk(KERN_ERR "%s out of bound pci memory access. "
-			"offset is 0x%llx\n", netxen_nic_driver_name, off);
+			"offset is 0x%llx\n", netxen_nic_driver_name,
+			(unsigned long long)off);
 		return -1;
 	}
 
@@ -2016,6 +2049,8 @@ int netxen_nic_get_board_info(struct netxen_adapter *adapter)
 	case NETXEN_BRDTYPE_P3_10G_CX4_LP:
 	case NETXEN_BRDTYPE_P3_IMEZ:
 	case NETXEN_BRDTYPE_P3_10G_SFP_PLUS:
+	case NETXEN_BRDTYPE_P3_10G_SFP_CT:
+	case NETXEN_BRDTYPE_P3_10G_SFP_QT:
 	case NETXEN_BRDTYPE_P3_10G_XFP:
 	case NETXEN_BRDTYPE_P3_10000_BASE_T:
 
@@ -2034,6 +2069,7 @@ int netxen_nic_get_board_info(struct netxen_adapter *adapter)
 	default:
 		printk("%s: Unknown(%x)\n", netxen_nic_driver_name,
 		       boardinfo->board_type);
+		rv = -ENODEV;
 		break;
 	}
 
@@ -2044,6 +2080,7 @@ int netxen_nic_get_board_info(struct netxen_adapter *adapter)
 
 int netxen_nic_set_mtu_gb(struct netxen_adapter *adapter, int new_mtu)
 {
+	new_mtu += MTU_FUDGE_FACTOR;
 	netxen_nic_write_w0(adapter,
 		NETXEN_NIU_GB_MAX_FRAME_SIZE(adapter->physical_port),
 		new_mtu);
@@ -2052,7 +2089,7 @@ int netxen_nic_set_mtu_gb(struct netxen_adapter *adapter, int new_mtu)
 
 int netxen_nic_set_mtu_xgb(struct netxen_adapter *adapter, int new_mtu)
 {
-	new_mtu += NETXEN_NIU_HDRSIZE + NETXEN_NIU_TLRSIZE;
+	new_mtu += MTU_FUDGE_FACTOR;
 	if (adapter->physical_port == 0)
 		netxen_nic_write_w0(adapter, NETXEN_NIU_XGE_MAX_FRAME_SIZE,
 				new_mtu);
@@ -2074,12 +2111,22 @@ void netxen_nic_set_link_parameters(struct netxen_adapter *adapter)
 	__u32 status;
 	__u32 autoneg;
 	__u32 mode;
+	__u32 port_mode;
 
 	netxen_nic_read_w0(adapter, NETXEN_NIU_MODE, &mode);
 	if (netxen_get_niu_enable_ge(mode)) {	/* Gb 10/100/1000 Mbps mode */
+
+		adapter->hw_read_wx(adapter,
+				NETXEN_PORT_MODE_ADDR, &port_mode, 4);
+		if (port_mode == NETXEN_PORT_MODE_802_3_AP) {
+			adapter->link_speed   = SPEED_1000;
+			adapter->link_duplex  = DUPLEX_FULL;
+			adapter->link_autoneg = AUTONEG_DISABLE;
+			return;
+		}
+
 		if (adapter->phy_read
-		    && adapter->
-		    phy_read(adapter,
+		    && adapter->phy_read(adapter,
 			     NETXEN_NIU_GB_MII_MGMT_ADDR_PHY_STATUS,
 			     &status) == 0) {
 			if (netxen_get_phy_link(status)) {
@@ -2109,8 +2156,7 @@ void netxen_nic_set_link_parameters(struct netxen_adapter *adapter)
 					break;
 				}
 				if (adapter->phy_read
-				    && adapter->
-				    phy_read(adapter,
+				    && adapter->phy_read(adapter,
 					     NETXEN_NIU_GB_MII_MGMT_ADDR_AUTONEG,
 					     &autoneg) != 0)
 					adapter->link_autoneg = autoneg;
@@ -2162,10 +2208,10 @@ void netxen_nic_flash_print(struct netxen_adapter *adapter)
 	if (adapter->portnum == 0) {
 		get_brd_name_by_type(board_info->board_type, brd_name);
 
-		printk("NetXen %s Board S/N %s  Chip id 0x%x\n",
-				brd_name, serial_num, board_info->chip_id);
-		printk("NetXen Firmware version %d.%d.%d\n", fw_major,
-				fw_minor, fw_build);
+		printk(KERN_INFO "NetXen %s Board S/N %s  Chip rev 0x%x\n",
+				brd_name, serial_num, adapter->ahw.revision_id);
+		printk(KERN_INFO "NetXen Firmware version %d.%d.%d\n",
+				fw_major, fw_minor, fw_build);
 	}
 
 	if (NETXEN_VERSION_CODE(fw_major, fw_minor, fw_build) <
diff --git a/drivers/net/netxen/netxen_nic_hw.h b/drivers/net/netxen/netxen_nic_hw.h
index b8e0030f03d7..aae737dc77a8 100644
--- a/drivers/net/netxen/netxen_nic_hw.h
+++ b/drivers/net/netxen/netxen_nic_hw.h
@@ -419,12 +419,9 @@ typedef enum {
 #define netxen_get_niu_enable_ge(config_word)	\
 		_netxen_crb_get_bit(config_word, 1)
 
-/* Promiscous mode options (GbE mode only) */
-typedef enum {
-	NETXEN_NIU_PROMISC_MODE = 0,
-	NETXEN_NIU_NON_PROMISC_MODE,
-	NETXEN_NIU_ALLMULTI_MODE
-} netxen_niu_prom_mode_t;
+#define NETXEN_NIU_NON_PROMISC_MODE	0
+#define NETXEN_NIU_PROMISC_MODE		1
+#define NETXEN_NIU_ALLMULTI_MODE	2
 
 /*
  * NIU GB Drop CRC Register
@@ -471,9 +468,9 @@ typedef enum {
 
 /* Set promiscuous mode for a GbE interface */
 int netxen_niu_set_promiscuous_mode(struct netxen_adapter *adapter,
-				    netxen_niu_prom_mode_t mode);
+				    u32 mode);
 int netxen_niu_xg_set_promiscuous_mode(struct netxen_adapter *adapter,
-				       netxen_niu_prom_mode_t mode);
+				       u32 mode);
 
 /* set the MAC address for a given MAC */
 int netxen_niu_macaddr_set(struct netxen_adapter *adapter,
diff --git a/drivers/net/netxen/netxen_nic_init.c b/drivers/net/netxen/netxen_nic_init.c
index 01ab31b34a85..5bba675d0504 100644
--- a/drivers/net/netxen/netxen_nic_init.c
+++ b/drivers/net/netxen/netxen_nic_init.c
@@ -364,6 +364,11 @@ void netxen_initialize_adapter_ops(struct netxen_adapter *adapter)
 	default:
 		break;
 	}
+
+	if (NX_IS_REVISION_P3(adapter->ahw.revision_id)) {
+		adapter->set_mtu = nx_fw_cmd_set_mtu;
+		adapter->set_promisc = netxen_p3_nic_set_promisc;
+	}
 }
 
 /*
@@ -1074,10 +1079,12 @@ int netxen_initialize_adapter_offload(struct netxen_adapter *adapter)
 
 void netxen_free_adapter_offload(struct netxen_adapter *adapter)
 {
-	int i;
+	int i = 100;
+
+	if (!adapter->dummy_dma.addr)
+		return;
 
-	if (adapter->dummy_dma.addr) {
-		i = 100;
+	if (NX_IS_REVISION_P2(adapter->ahw.revision_id)) {
 		do {
 			if (dma_watchdog_shutdown_request(adapter) == 1)
 				break;
@@ -1085,17 +1092,17 @@ void netxen_free_adapter_offload(struct netxen_adapter *adapter)
 			if (dma_watchdog_shutdown_poll_result(adapter) == 1)
 				break;
 		} while (--i);
+	}
 
-		if (i) {
-			pci_free_consistent(adapter->pdev,
-				    NETXEN_HOST_DUMMY_DMA_SIZE,
-				    adapter->dummy_dma.addr,
-				    adapter->dummy_dma.phys_addr);
-			adapter->dummy_dma.addr = NULL;
-		} else {
-			printk(KERN_ERR "%s: dma_watchdog_shutdown failed\n",
-					adapter->netdev->name);
-		}
+	if (i) {
+		pci_free_consistent(adapter->pdev,
+			    NETXEN_HOST_DUMMY_DMA_SIZE,
+			    adapter->dummy_dma.addr,
+			    adapter->dummy_dma.phys_addr);
+		adapter->dummy_dma.addr = NULL;
+	} else {
+		printk(KERN_ERR "%s: dma_watchdog_shutdown failed\n",
+				adapter->netdev->name);
 	}
 }
 
diff --git a/drivers/net/netxen/netxen_nic_main.c b/drivers/net/netxen/netxen_nic_main.c
index 91d209a8f6cb..008fd6618a5f 100644
--- a/drivers/net/netxen/netxen_nic_main.c
+++ b/drivers/net/netxen/netxen_nic_main.c
@@ -149,80 +149,18 @@ static uint32_t msi_tgt_status[8] = {
 
 static struct netxen_legacy_intr_set legacy_intr[] = NX_LEGACY_INTR_CONFIG;
 
-static void netxen_nic_disable_int(struct netxen_adapter *adapter)
+static inline void netxen_nic_disable_int(struct netxen_adapter *adapter)
 {
-	u32 mask = 0x7ff;
-	int retries = 32;
-	int pci_fn = adapter->ahw.pci_func;
-
-	if (adapter->msi_mode != MSI_MODE_MULTIFUNC)
-		adapter->pci_write_normalize(adapter,
-				adapter->crb_intr_mask, 0);
-
-	if (adapter->intr_scheme != -1 &&
-	    adapter->intr_scheme != INTR_SCHEME_PERPORT)
-		adapter->pci_write_immediate(adapter, ISR_INT_MASK, mask);
-
-	if (!NETXEN_IS_MSI_FAMILY(adapter)) {
-		do {
-			adapter->pci_write_immediate(adapter,
-					ISR_INT_TARGET_STATUS, 0xffffffff);
-			mask = adapter->pci_read_immediate(adapter,
-					ISR_INT_VECTOR);
-			if (!(mask & 0x80))
-				break;
-			udelay(10);
-		} while (--retries);
-
-		if (!retries) {
-			printk(KERN_NOTICE "%s: Failed to disable interrupt completely\n",
-					netxen_nic_driver_name);
-		}
-	} else {
-		if (adapter->msi_mode == MSI_MODE_MULTIFUNC) {
-			adapter->pci_write_immediate(adapter,
-					msi_tgt_status[pci_fn], 0xffffffff);
-		}
-	}
+	adapter->pci_write_normalize(adapter, adapter->crb_intr_mask, 0);
 }
 
-static void netxen_nic_enable_int(struct netxen_adapter *adapter)
+static inline void netxen_nic_enable_int(struct netxen_adapter *adapter)
 {
-	u32 mask;
-
-	DPRINTK(1, INFO, "Entered ISR Enable \n");
-
-	if (adapter->intr_scheme != -1 &&
-		adapter->intr_scheme != INTR_SCHEME_PERPORT) {
-		switch (adapter->ahw.board_type) {
-		case NETXEN_NIC_GBE:
-			mask  =  0x77b;
-			break;
-		case NETXEN_NIC_XGBE:
-			mask  =  0x77f;
-			break;
-		default:
-			mask  =  0x7ff;
-			break;
-		}
-
-		adapter->pci_write_immediate(adapter, ISR_INT_MASK, mask);
-	}
-
 	adapter->pci_write_normalize(adapter, adapter->crb_intr_mask, 0x1);
 
-	if (!NETXEN_IS_MSI_FAMILY(adapter)) {
-		mask = 0xbff;
-		if (adapter->intr_scheme != -1 &&
-			adapter->intr_scheme != INTR_SCHEME_PERPORT) {
-			adapter->pci_write_normalize(adapter,
-					CRB_INT_VECTOR, 0);
-		}
+	if (!NETXEN_IS_MSI_FAMILY(adapter))
 		adapter->pci_write_immediate(adapter,
-				ISR_INT_TARGET_MASK, mask);
-	}
-
-	DPRINTK(1, INFO, "Done with enable Int\n");
+				adapter->legacy_intr.tgt_mask_reg, 0xfbff);
 }
 
 static int nx_set_dma_mask(struct netxen_adapter *adapter, uint8_t revision_id)
@@ -284,6 +222,8 @@ static void netxen_check_options(struct netxen_adapter *adapter)
 	case NETXEN_BRDTYPE_P3_10G_CX4_LP:
 	case NETXEN_BRDTYPE_P3_IMEZ:
 	case NETXEN_BRDTYPE_P3_10G_SFP_PLUS:
+	case NETXEN_BRDTYPE_P3_10G_SFP_QT:
+	case NETXEN_BRDTYPE_P3_10G_SFP_CT:
 	case NETXEN_BRDTYPE_P3_10G_XFP:
 	case NETXEN_BRDTYPE_P3_10000_BASE_T:
 		adapter->msix_supported = !!use_msi_x;
@@ -301,6 +241,10 @@ static void netxen_check_options(struct netxen_adapter *adapter)
 	case NETXEN_BRDTYPE_P3_REF_QG:
 	case NETXEN_BRDTYPE_P3_4_GB:
 	case NETXEN_BRDTYPE_P3_4_GB_MM:
+		adapter->msix_supported = 0;
+		adapter->max_rx_desc_count = MAX_RCV_DESCRIPTORS_10G;
+		break;
+
 	case NETXEN_BRDTYPE_P2_SB35_4G:
 	case NETXEN_BRDTYPE_P2_SB31_2G:
 		adapter->msix_supported = 0;
@@ -415,16 +359,6 @@ static void netxen_pcie_strap_init(struct netxen_adapter *adapter)
 	int i, pos;
 	struct pci_dev *pdev;
 
-	pdev = pci_get_device(0x1166, 0x0140, NULL);
-	if (pdev) {
-		pci_dev_put(pdev);
-		adapter->hw_read_wx(adapter,
-			NETXEN_PCIE_REG(PCIE_TGT_SPLIT_CHICKEN), &chicken, 4);
-		chicken |= 0x4000;
-		adapter->hw_write_wx(adapter,
-			NETXEN_PCIE_REG(PCIE_TGT_SPLIT_CHICKEN), &chicken, 4);
-	}
-
 	pdev = adapter->pdev;
 
 	adapter->hw_read_wx(adapter,
@@ -499,6 +433,44 @@ static void netxen_init_msix_entries(struct netxen_adapter *adapter)
 		adapter->msix_entries[i].entry = i;
 }
 
+static int
+netxen_read_mac_addr(struct netxen_adapter *adapter)
+{
+	int i;
+	unsigned char *p;
+	__le64 mac_addr;
+	DECLARE_MAC_BUF(mac);
+	struct net_device *netdev = adapter->netdev;
+	struct pci_dev *pdev = adapter->pdev;
+
+	if (netxen_is_flash_supported(adapter) != 0)
+		return -EIO;
+
+	if (NX_IS_REVISION_P3(adapter->ahw.revision_id)) {
+		if (netxen_p3_get_mac_addr(adapter, &mac_addr) != 0)
+			return -EIO;
+	} else {
+		if (netxen_get_flash_mac_addr(adapter, &mac_addr) != 0)
+			return -EIO;
+	}
+
+	p = (unsigned char *)&mac_addr;
+	for (i = 0; i < 6; i++)
+		netdev->dev_addr[i] = *(p + 5 - i);
+
+	memcpy(netdev->perm_addr, netdev->dev_addr, netdev->addr_len);
+
+	/* set station address */
+
+	if (!is_valid_ether_addr(netdev->perm_addr)) {
+		dev_warn(&pdev->dev, "Bad MAC address %s.\n",
+				print_mac(mac, netdev->dev_addr));
+	} else
+		adapter->macaddr_set(adapter, netdev->dev_addr);
+
+	return 0;
+}
+
 /*
  * netxen_nic_probe()
  *
@@ -527,10 +499,8 @@ netxen_nic_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 	unsigned long mem_base, mem_len, db_base, db_len, pci_len0 = 0;
 	int i = 0, err;
 	int first_driver, first_boot;
-	__le64 mac_addr[FLASH_NUM_PORTS + 1];
 	u32 val;
 	int pci_func_id = PCI_FUNC(pdev->devfn);
-	DECLARE_MAC_BUF(mac);
 	struct netxen_legacy_intr_set *legacy_intrp;
 	uint8_t revision_id;
 
@@ -543,6 +513,13 @@ netxen_nic_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 		return -ENODEV;
 	}
 
+	if (pdev->revision >= NX_P3_A0 && pdev->revision < NX_P3_B1) {
+		printk(KERN_WARNING "NetXen chip revisions between 0x%x-0x%x"
+				"will not be enabled.\n",
+				NX_P3_A0, NX_P3_B1);
+		return -ENODEV;
+	}
+
 	if ((err = pci_enable_device(pdev)))
 		return err;
 
@@ -700,13 +677,10 @@ netxen_nic_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 	adapter->status   &= ~NETXEN_NETDEV_STATUS;
 	adapter->rx_csum = 1;
 	adapter->mc_enabled = 0;
-	if (NX_IS_REVISION_P3(revision_id)) {
+	if (NX_IS_REVISION_P3(revision_id))
 		adapter->max_mc_count = 38;
-		adapter->max_rds_rings = 2;
-	} else {
+	else
 		adapter->max_mc_count = 16;
-		adapter->max_rds_rings = 3;
-	}
 
 	netdev->open		   = netxen_nic_open;
 	netdev->stop		   = netxen_nic_close;
@@ -779,10 +753,6 @@ netxen_nic_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 		if (adapter->portnum == 0)
 			first_driver = 1;
 	}
-	adapter->crb_addr_cmd_producer = crb_cmd_producer[adapter->portnum];
-	adapter->crb_addr_cmd_consumer = crb_cmd_consumer[adapter->portnum];
-	netxen_nic_update_cmd_producer(adapter, 0);
-	netxen_nic_update_cmd_consumer(adapter, 0);
 
 	if (first_driver) {
 		first_boot = adapter->pci_read_normalize(adapter,
@@ -903,34 +873,14 @@ request_msi:
 		goto err_out_disable_msi;
 
 	init_timer(&adapter->watchdog_timer);
-	adapter->ahw.linkup = 0;
 	adapter->watchdog_timer.function = &netxen_watchdog;
 	adapter->watchdog_timer.data = (unsigned long)adapter;
 	INIT_WORK(&adapter->watchdog_task, netxen_watchdog_task);
 	INIT_WORK(&adapter->tx_timeout_task, netxen_tx_timeout_task);
 
-	if (netxen_is_flash_supported(adapter) == 0 &&
-			netxen_get_flash_mac_addr(adapter, mac_addr) == 0) {
-		unsigned char *p;
-
-		p = (unsigned char *)&mac_addr[adapter->portnum];
-		netdev->dev_addr[0] = *(p + 5);
-		netdev->dev_addr[1] = *(p + 4);
-		netdev->dev_addr[2] = *(p + 3);
-		netdev->dev_addr[3] = *(p + 2);
-		netdev->dev_addr[4] = *(p + 1);
-		netdev->dev_addr[5] = *(p + 0);
-
-		memcpy(netdev->perm_addr, netdev->dev_addr,
-			netdev->addr_len);
-		if (!is_valid_ether_addr(netdev->perm_addr)) {
-			printk(KERN_ERR "%s: Bad MAC address %s.\n",
-					netxen_nic_driver_name,
-					print_mac(mac, netdev->dev_addr));
-		} else {
-			adapter->macaddr_set(adapter, netdev->dev_addr);
-		}
-	}
+	err = netxen_read_mac_addr(adapter);
+	if (err)
+		dev_warn(&pdev->dev, "failed to read mac addr\n");
 
 	netif_carrier_off(netdev);
 	netif_stop_queue(netdev);
@@ -1005,6 +955,7 @@ static void __devexit netxen_nic_remove(struct pci_dev *pdev)
 
 	if (adapter->is_up == NETXEN_ADAPTER_UP_MAGIC) {
 		netxen_free_hw_resources(adapter);
+		netxen_release_rx_buffers(adapter);
 		netxen_free_sw_resources(adapter);
 	}
 
@@ -1053,6 +1004,11 @@ static int netxen_nic_open(struct net_device *netdev)
 			return -EIO;
 		}
 
+		if (adapter->fw_major < 4)
+			adapter->max_rds_rings = 3;
+		else
+			adapter->max_rds_rings = 2;
+
 		err = netxen_alloc_sw_resources(adapter);
 		if (err) {
 			printk(KERN_ERR "%s: Error in setting sw resources\n",
@@ -1069,15 +1025,24 @@ static int netxen_nic_open(struct net_device *netdev)
 			goto err_out_free_sw;
 		}
 
+		if ((adapter->msi_mode != MSI_MODE_MULTIFUNC) ||
+			(adapter->intr_scheme != INTR_SCHEME_PERPORT)) {
+			printk(KERN_ERR "%s: Firmware interrupt scheme is "
+					"incompatible with driver\n",
+					netdev->name);
+			adapter->driver_mismatch = 1;
+			goto err_out_free_hw;
+		}
+
 		if (adapter->fw_major < 4) {
 			adapter->crb_addr_cmd_producer =
 				crb_cmd_producer[adapter->portnum];
 			adapter->crb_addr_cmd_consumer =
 				crb_cmd_consumer[adapter->portnum];
-		}
 
-		netxen_nic_update_cmd_producer(adapter, 0);
-		netxen_nic_update_cmd_consumer(adapter, 0);
+			netxen_nic_update_cmd_producer(adapter, 0);
+			netxen_nic_update_cmd_consumer(adapter, 0);
+		}
 
 		for (ctx = 0; ctx < MAX_RCV_CTX; ++ctx) {
 			for (ring = 0; ring < adapter->max_rds_rings; ring++)
@@ -1094,7 +1059,7 @@ static int netxen_nic_open(struct net_device *netdev)
 				  flags, netdev->name, adapter);
 		if (err) {
 			printk(KERN_ERR "request_irq failed with: %d\n", err);
-			goto err_out_free_hw;
+			goto err_out_free_rxbuf;
 		}
 
 		adapter->is_up = NETXEN_ADAPTER_UP_MAGIC;
@@ -1113,11 +1078,10 @@ static int netxen_nic_open(struct net_device *netdev)
 	netxen_nic_set_link_parameters(adapter);
 
 	netdev->set_multicast_list(netdev);
-	if (NX_IS_REVISION_P3(adapter->ahw.revision_id))
-		nx_fw_cmd_set_mtu(adapter, netdev->mtu);
-	else
+	if (adapter->set_mtu)
 		adapter->set_mtu(adapter, netdev->mtu);
 
+	adapter->ahw.linkup = 0;
 	mod_timer(&adapter->watchdog_timer, jiffies);
 
 	napi_enable(&adapter->napi);
@@ -1129,6 +1093,8 @@ static int netxen_nic_open(struct net_device *netdev)
 
 err_out_free_irq:
 	free_irq(adapter->irq, adapter);
+err_out_free_rxbuf:
+	netxen_release_rx_buffers(adapter);
 err_out_free_hw:
 	netxen_free_hw_resources(adapter);
 err_out_free_sw:
@@ -1154,10 +1120,8 @@ static int netxen_nic_close(struct net_device *netdev)
 
 	netxen_release_tx_buffers(adapter);
 
-	if (adapter->is_up == NETXEN_ADAPTER_UP_MAGIC) {
-		FLUSH_SCHEDULED_WORK();
-		del_timer_sync(&adapter->watchdog_timer);
-	}
+	FLUSH_SCHEDULED_WORK();
+	del_timer_sync(&adapter->watchdog_timer);
 
 	return 0;
 }
@@ -1410,20 +1374,17 @@ static void netxen_nic_handle_phy_intr(struct netxen_adapter *adapter)
 
 	port = adapter->physical_port;
 
-	if (adapter->ahw.board_type == NETXEN_NIC_GBE) {
-		val = adapter->pci_read_normalize(adapter, CRB_XG_STATE);
-		linkup = (val >> port) & 1;
+	if (NX_IS_REVISION_P3(adapter->ahw.revision_id)) {
+		val = adapter->pci_read_normalize(adapter, CRB_XG_STATE_P3);
+		val = XG_LINK_STATE_P3(adapter->ahw.pci_func, val);
+		linkup = (val == XG_LINK_UP_P3);
 	} else {
-		if (adapter->fw_major < 4) {
-			val = adapter->pci_read_normalize(adapter,
-					CRB_XG_STATE);
+		val = adapter->pci_read_normalize(adapter, CRB_XG_STATE);
+		if (adapter->ahw.board_type == NETXEN_NIC_GBE)
+			linkup = (val >> port) & 1;
+		else {
 			val = (val >> port*8) & 0xff;
 			linkup = (val == XG_LINK_UP);
-		} else {
-			val = adapter->pci_read_normalize(adapter,
-				CRB_XG_STATE_P3);
-			val = XG_LINK_STATE_P3(adapter->ahw.pci_func, val);
-			linkup = (val == XG_LINK_UP_P3);
 		}
 	}
 
@@ -1463,7 +1424,8 @@ void netxen_watchdog_task(struct work_struct *work)
 
 	netxen_nic_handle_phy_intr(adapter);
 
-	mod_timer(&adapter->watchdog_timer, jiffies + 2 * HZ);
+	if (netif_running(adapter->netdev))
+		mod_timer(&adapter->watchdog_timer, jiffies + 2 * HZ);
 }
 
 static void netxen_tx_timeout(struct net_device *netdev)
@@ -1523,30 +1485,49 @@ struct net_device_stats *netxen_nic_get_stats(struct net_device *netdev)
 	return stats;
 }
 
-static inline void
-netxen_handle_int(struct netxen_adapter *adapter)
-{
-	netxen_nic_disable_int(adapter);
-	napi_schedule(&adapter->napi);
-}
-
 static irqreturn_t netxen_intr(int irq, void *data)
 {
 	struct netxen_adapter *adapter = data;
-	u32 our_int = 0;
+	u32 status = 0;
 
-	our_int = adapter->pci_read_normalize(adapter, CRB_INT_VECTOR);
-	/* not our interrupt */
-	if ((our_int & (0x80 << adapter->portnum)) == 0)
+	status = adapter->pci_read_immediate(adapter, ISR_INT_VECTOR);
+
+	if (!(status & adapter->legacy_intr.int_vec_bit))
 		return IRQ_NONE;
 
-	if (adapter->intr_scheme == INTR_SCHEME_PERPORT) {
+	if (adapter->ahw.revision_id >= NX_P3_B1) {
+		/* check interrupt state machine, to be sure */
+		status = adapter->pci_read_immediate(adapter,
+				ISR_INT_STATE_REG);
+		if (!ISR_LEGACY_INT_TRIGGERED(status))
+			return IRQ_NONE;
+
+	} else {
+		unsigned long our_int = 0;
+
+		our_int = adapter->pci_read_normalize(adapter, CRB_INT_VECTOR);
+
+		/* not our interrupt */
+		if (!test_and_clear_bit((7 + adapter->portnum), &our_int))
+			return IRQ_NONE;
+
 		/* claim interrupt */
-		adapter->pci_write_normalize(adapter, CRB_INT_VECTOR,
-				our_int & ~((u32)(0x80 << adapter->portnum)));
+		adapter->pci_write_normalize(adapter,
+				CRB_INT_VECTOR, (our_int & 0xffffffff));
 	}
 
-	netxen_handle_int(adapter);
+	/* clear interrupt */
+	if (adapter->fw_major < 4)
+		netxen_nic_disable_int(adapter);
+
+	adapter->pci_write_immediate(adapter,
+			adapter->legacy_intr.tgt_status_reg,
+			0xffffffff);
+	/* read twice to ensure write is flushed */
+	adapter->pci_read_immediate(adapter, ISR_INT_VECTOR);
+	adapter->pci_read_immediate(adapter, ISR_INT_VECTOR);
+
+	napi_schedule(&adapter->napi);
 
 	return IRQ_HANDLED;
 }
@@ -1555,7 +1536,11 @@ static irqreturn_t netxen_msi_intr(int irq, void *data)
 {
 	struct netxen_adapter *adapter = data;
 
-	netxen_handle_int(adapter);
+	/* clear interrupt */
+	adapter->pci_write_immediate(adapter,
+			msi_tgt_status[adapter->ahw.pci_func], 0xffffffff);
+
+	napi_schedule(&adapter->napi);
 	return IRQ_HANDLED;
 }
 
diff --git a/drivers/net/netxen/netxen_nic_niu.c b/drivers/net/netxen/netxen_nic_niu.c
index 4cb8f4a1cf4b..27f07f6a45b1 100644
--- a/drivers/net/netxen/netxen_nic_niu.c
+++ b/drivers/net/netxen/netxen_nic_niu.c
@@ -610,6 +610,9 @@ int netxen_niu_macaddr_set(struct netxen_adapter *adapter,
 	int i;
 	DECLARE_MAC_BUF(mac);
 
+	if (NX_IS_REVISION_P3(adapter->ahw.revision_id))
+		return 0;
+
 	for (i = 0; i < 10; i++) {
 		temp[0] = temp[1] = 0;
 		memcpy(temp + 2, addr, 2);
@@ -727,6 +730,9 @@ int netxen_niu_disable_gbe_port(struct netxen_adapter *adapter)
 	__u32 mac_cfg0;
 	u32 port = adapter->physical_port;
 
+	if (NX_IS_REVISION_P3(adapter->ahw.revision_id))
+		return 0;
+
 	if (port > NETXEN_NIU_MAX_GBE_PORTS)
 		return -EINVAL;
 	mac_cfg0 = 0;
@@ -743,6 +749,9 @@ int netxen_niu_disable_xg_port(struct netxen_adapter *adapter)
 	__u32 mac_cfg;
 	u32 port = adapter->physical_port;
 
+	if (NX_IS_REVISION_P3(adapter->ahw.revision_id))
+		return 0;
+
 	if (port > NETXEN_NIU_MAX_XG_PORTS)
 		return -EINVAL;
 
@@ -755,7 +764,7 @@ int netxen_niu_disable_xg_port(struct netxen_adapter *adapter)
 
 /* Set promiscuous mode for a GbE interface */
 int netxen_niu_set_promiscuous_mode(struct netxen_adapter *adapter,
-				    netxen_niu_prom_mode_t mode)
+		u32 mode)
 {
 	__u32 reg;
 	u32 port = adapter->physical_port;
@@ -819,6 +828,9 @@ int netxen_niu_xg_macaddr_set(struct netxen_adapter *adapter,
 	u8 temp[4];
 	u32 val;
 
+	if (NX_IS_REVISION_P3(adapter->ahw.revision_id))
+		return 0;
+
 	if ((phy < 0) || (phy > NETXEN_NIU_MAX_XG_PORTS))
 		return -EIO;
 
@@ -894,7 +906,7 @@ int netxen_niu_xg_macaddr_get(struct netxen_adapter *adapter,
 #endif  /*  0  */
 
 int netxen_niu_xg_set_promiscuous_mode(struct netxen_adapter *adapter,
-				       netxen_niu_prom_mode_t mode)
+		u32 mode)
 {
 	__u32 reg;
 	u32 port = adapter->physical_port;
diff --git a/drivers/net/netxen/netxen_nic_phan_reg.h b/drivers/net/netxen/netxen_nic_phan_reg.h
index 3bfa51b62a4f..b293adcc95ab 100644
--- a/drivers/net/netxen/netxen_nic_phan_reg.h
+++ b/drivers/net/netxen/netxen_nic_phan_reg.h
@@ -95,8 +95,8 @@
 #define CRB_HOST_STS_PROD           NETXEN_NIC_REG(0xdc)
 #define CRB_HOST_STS_CONS           NETXEN_NIC_REG(0xe0)
 #define CRB_PEG_CMD_PROD            NETXEN_NIC_REG(0xe4)
-#define CRB_PEG_CMD_CONS            NETXEN_NIC_REG(0xe8)
-#define CRB_HOST_BUFFER_PROD        NETXEN_NIC_REG(0xec)
+#define CRB_PF_LINK_SPEED_1         NETXEN_NIC_REG(0xe8)
+#define CRB_PF_LINK_SPEED_2         NETXEN_NIC_REG(0xec)
 #define CRB_HOST_BUFFER_CONS        NETXEN_NIC_REG(0xf0)
 #define CRB_JUMBO_BUFFER_PROD       NETXEN_NIC_REG(0xf4)
 #define CRB_JUMBO_BUFFER_CONS       NETXEN_NIC_REG(0xf8)
@@ -125,6 +125,8 @@
 #define CRB_SW_INT_MASK_2	   NETXEN_NIC_REG(0x1e4)
 #define CRB_SW_INT_MASK_3	   NETXEN_NIC_REG(0x1e8)
 
+#define CRB_MAC_BLOCK_START        NETXEN_CAM_RAM(0x1c0)
+
 /*
  * capabilities register, can be used to selectively enable/disable features
  * for backward compability
diff --git a/drivers/net/ni5010.c b/drivers/net/ni5010.c
index a20005c09e07..8e0ca9f4e404 100644
--- a/drivers/net/ni5010.c
+++ b/drivers/net/ni5010.c
@@ -648,7 +648,6 @@ static void ni5010_set_multicast_list(struct net_device *dev)
 	PRINTK2((KERN_DEBUG "%s: entering set_multicast_list\n", dev->name));
 
 	if (dev->flags&IFF_PROMISC || dev->flags&IFF_ALLMULTI || dev->mc_list) {
-		dev->flags |= IFF_PROMISC;
 		outb(RMD_PROMISC, EDLC_RMODE); /* Enable promiscuous mode */
 		PRINTK((KERN_DEBUG "%s: Entering promiscuous mode\n", dev->name));
 	} else {
diff --git a/drivers/net/ni52.c b/drivers/net/ni52.c
index a316dcc8a06d..b9a882d362da 100644
--- a/drivers/net/ni52.c
+++ b/drivers/net/ni52.c
@@ -621,7 +621,7 @@ static int init586(struct net_device *dev)
 		if (num_addrs > len) {
 			printk(KERN_ERR "%s: switching to promisc. mode\n",
 				dev->name);
-			dev->flags |= IFF_PROMISC;
+			writeb(0x01, &cfg_cmd->promisc);
 		}
 	}
 	if (dev->flags & IFF_PROMISC)
diff --git a/drivers/net/niu.c b/drivers/net/niu.c
index 8ee7d7bb951b..e4765b713aba 100644
--- a/drivers/net/niu.c
+++ b/drivers/net/niu.c
@@ -6417,7 +6417,7 @@ static int niu_ethflow_to_class(int flow_type, u64 *class)
 		*class = CLASS_CODE_SCTP_IPV6;
 		break;
 	default:
-		return -1;
+		return 0;
 	}
 
 	return 1;
diff --git a/drivers/net/pasemi_mac.c b/drivers/net/pasemi_mac.c
index 993d87c9296f..edc0fd588985 100644
--- a/drivers/net/pasemi_mac.c
+++ b/drivers/net/pasemi_mac.c
@@ -650,7 +650,7 @@ static void pasemi_mac_replenish_rx_ring(const struct net_device *dev,
 				     mac->bufsz - LOCAL_SKB_ALIGN,
 				     PCI_DMA_FROMDEVICE);
 
-		if (unlikely(dma_mapping_error(dma))) {
+		if (unlikely(pci_dma_mapping_error(mac->dma_pdev, dma))) {
 			dev_kfree_skb_irq(info->skb);
 			break;
 		}
@@ -1519,7 +1519,7 @@ static int pasemi_mac_start_tx(struct sk_buff *skb, struct net_device *dev)
 	map[0] = pci_map_single(mac->dma_pdev, skb->data, skb_headlen(skb),
 				PCI_DMA_TODEVICE);
 	map_size[0] = skb_headlen(skb);
-	if (dma_mapping_error(map[0]))
+	if (pci_dma_mapping_error(mac->dma_pdev, map[0]))
 		goto out_err_nolock;
 
 	for (i = 0; i < nfrags; i++) {
@@ -1529,7 +1529,7 @@ static int pasemi_mac_start_tx(struct sk_buff *skb, struct net_device *dev)
 					frag->page_offset, frag->size,
 					PCI_DMA_TODEVICE);
 		map_size[i+1] = frag->size;
-		if (dma_mapping_error(map[i+1])) {
+		if (pci_dma_mapping_error(mac->dma_pdev, map[i+1])) {
 			nfrags = i;
 			goto out_err_nolock;
 		}
diff --git a/drivers/net/pcmcia/axnet_cs.c b/drivers/net/pcmcia/axnet_cs.c
index 3f682d49a4e6..52bf11b73c6e 100644
--- a/drivers/net/pcmcia/axnet_cs.c
+++ b/drivers/net/pcmcia/axnet_cs.c
@@ -784,6 +784,7 @@ static struct pcmcia_device_id axnet_ids[] = {
 	PCMCIA_DEVICE_PROD_ID12("corega K.K.", "corega FEther PCC-TXD", 0x5261440f, 0x436768c5),
 	PCMCIA_DEVICE_PROD_ID12("corega K.K.", "corega FEtherII PCC-TXD", 0x5261440f, 0x730df72e),
 	PCMCIA_DEVICE_PROD_ID12("Dynalink", "L100C16", 0x55632fd5, 0x66bc2a90),
+	PCMCIA_DEVICE_PROD_ID12("IO DATA", "ETXPCM", 0x547e66dc, 0x233adac2),
 	PCMCIA_DEVICE_PROD_ID12("Linksys", "EtherFast 10/100 PC Card (PCMPC100 V3)", 0x0733cc81, 0x232019a8),
 	PCMCIA_DEVICE_PROD_ID12("MELCO", "LPC3-TX", 0x481e0094, 0xf91af609),
 	PCMCIA_DEVICE_PROD_ID12("PCMCIA", "100BASE", 0x281f1c5d, 0x7c2add04),
diff --git a/drivers/net/pcmcia/pcnet_cs.c b/drivers/net/pcmcia/pcnet_cs.c
index 2d4c4ad89b8d..ebc1ae6bcbe5 100644
--- a/drivers/net/pcmcia/pcnet_cs.c
+++ b/drivers/net/pcmcia/pcnet_cs.c
@@ -1626,6 +1626,7 @@ static struct pcmcia_device_id pcnet_ids[] = {
 	PCMCIA_DEVICE_PROD_ID12("corega K.K.", "corega EtherII PCC-TD", 0x5261440f, 0xc49bd73d),
 	PCMCIA_DEVICE_PROD_ID12("Corega K.K.", "corega EtherII PCC-TD", 0xd4fdcbd8, 0xc49bd73d),
 	PCMCIA_DEVICE_PROD_ID12("corega K.K.", "corega Ether PCC-T", 0x5261440f, 0x6705fcaa),
+	PCMCIA_DEVICE_PROD_ID12("corega K.K.", "corega Ether PCC-TD", 0x5261440f, 0x47d5ca83),
 	PCMCIA_DEVICE_PROD_ID12("corega K.K.", "corega FastEther PCC-TX", 0x5261440f, 0x485e85d9),
 	PCMCIA_DEVICE_PROD_ID12("Corega,K.K.", "Ethernet LAN Card", 0x110d26d9, 0x9fd2f0a2),
 	PCMCIA_DEVICE_PROD_ID12("corega,K.K.", "Ethernet LAN Card", 0x9791a90e, 0x9fd2f0a2),
@@ -1737,7 +1738,6 @@ static struct pcmcia_device_id pcnet_ids[] = {
 	PCMCIA_DEVICE_PROD_ID1("CyQ've 10 Base-T LAN CARD", 0x94faf360),
 	PCMCIA_DEVICE_PROD_ID1("EP-210 PCMCIA LAN CARD.", 0x8850b4de),
 	PCMCIA_DEVICE_PROD_ID1("ETHER-C16", 0x06a8514f),
-	PCMCIA_DEVICE_PROD_ID1("IC-CARD", 0x60cb09a6),
 	PCMCIA_DEVICE_PROD_ID1("NE2000 Compatible", 0x75b8ad5a),
 	PCMCIA_DEVICE_PROD_ID2("EN-6200P2", 0xa996d078),
 	/* too generic! */
diff --git a/drivers/net/ppp_generic.c b/drivers/net/ppp_generic.c
index 739b3ab7bccc..ddccc074a76a 100644
--- a/drivers/net/ppp_generic.c
+++ b/drivers/net/ppp_generic.c
@@ -581,12 +581,12 @@ static long ppp_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
 			if (file == ppp->owner)
 				ppp_shutdown_interface(ppp);
 		}
-		if (atomic_read(&file->f_count) <= 2) {
+		if (atomic_long_read(&file->f_count) <= 2) {
 			ppp_release(NULL, file);
 			err = 0;
 		} else
-			printk(KERN_DEBUG "PPPIOCDETACH file->f_count=%d\n",
-			       atomic_read(&file->f_count));
+			printk(KERN_DEBUG "PPPIOCDETACH file->f_count=%ld\n",
+			       atomic_long_read(&file->f_count));
 		unlock_kernel();
 		return err;
 	}
diff --git a/drivers/net/ppp_mppe.c b/drivers/net/ppp_mppe.c
index b35d79449500..88f03c9e9403 100644
--- a/drivers/net/ppp_mppe.c
+++ b/drivers/net/ppp_mppe.c
@@ -46,7 +46,6 @@
 #include <linux/err.h>
 #include <linux/module.h>
 #include <linux/kernel.h>
-#include <linux/version.h>
 #include <linux/init.h>
 #include <linux/types.h>
 #include <linux/slab.h>
diff --git a/drivers/net/pppol2tp.c b/drivers/net/pppol2tp.c
index f9298827a76c..ff175e8f36b2 100644
--- a/drivers/net/pppol2tp.c
+++ b/drivers/net/pppol2tp.c
@@ -61,7 +61,6 @@
  */
 
 #include <linux/module.h>
-#include <linux/version.h>
 #include <linux/string.h>
 #include <linux/list.h>
 #include <asm/uaccess.h>
diff --git a/drivers/net/ps3_gelic_wireless.c b/drivers/net/ps3_gelic_wireless.c
index 6b2dee0cf3a9..a834b52a6a2c 100644
--- a/drivers/net/ps3_gelic_wireless.c
+++ b/drivers/net/ps3_gelic_wireless.c
@@ -1024,7 +1024,7 @@ static int gelic_wl_set_encode(struct net_device *netdev,
 	struct gelic_wl_info *wl = port_wl(netdev_priv(netdev));
 	struct iw_point *enc = &data->encoding;
 	__u16 flags;
-	unsigned int irqflag;
+	unsigned long irqflag;
 	int key_index, index_specified;
 	int ret = 0;
 
@@ -1097,7 +1097,7 @@ static int gelic_wl_get_encode(struct net_device *netdev,
 {
 	struct gelic_wl_info *wl = port_wl(netdev_priv(netdev));
 	struct iw_point *enc = &data->encoding;
-	unsigned int irqflag;
+	unsigned long irqflag;
 	unsigned int key_index, index_specified;
 	int ret = 0;
 
@@ -1215,7 +1215,7 @@ static int gelic_wl_set_encodeext(struct net_device *netdev,
 	struct iw_encode_ext *ext = (struct iw_encode_ext *)extra;
 	__u16 alg;
 	__u16 flags;
-	unsigned int irqflag;
+	unsigned long irqflag;
 	int key_index;
 	int ret = 0;
 
@@ -1303,7 +1303,7 @@ static int gelic_wl_get_encodeext(struct net_device *netdev,
 	struct gelic_wl_info *wl = port_wl(netdev_priv(netdev));
 	struct iw_point *enc = &data->encoding;
 	struct iw_encode_ext *ext = (struct iw_encode_ext *)extra;
-	unsigned int irqflag;
+	unsigned long irqflag;
 	int key_index;
 	int ret = 0;
 	int max_key_len;
@@ -1426,7 +1426,7 @@ static int gelic_wl_priv_set_psk(struct net_device *net_dev,
 {
 	struct gelic_wl_info *wl = port_wl(netdev_priv(net_dev));
 	unsigned int len;
-	unsigned int irqflag;
+	unsigned long irqflag;
 	int ret = 0;
 
 	pr_debug("%s:<- len=%d\n", __func__, data->data.length);
@@ -1467,7 +1467,7 @@ static int gelic_wl_priv_get_psk(struct net_device *net_dev,
 {
 	struct gelic_wl_info *wl = port_wl(netdev_priv(net_dev));
 	char *p;
-	unsigned int irqflag;
+	unsigned long irqflag;
 	unsigned int i;
 
 	pr_debug("%s:<-\n", __func__);
diff --git a/drivers/net/qla3xxx.c b/drivers/net/qla3xxx.c
index e7d48a352beb..3cdd07c45b6d 100644
--- a/drivers/net/qla3xxx.c
+++ b/drivers/net/qla3xxx.c
@@ -38,7 +38,7 @@
 
 #define DRV_NAME  	"qla3xxx"
 #define DRV_STRING 	"QLogic ISP3XXX Network Driver"
-#define DRV_VERSION	"v2.03.00-k4"
+#define DRV_VERSION	"v2.03.00-k5"
 #define PFX		DRV_NAME " "
 
 static const char ql3xxx_driver_name[] = DRV_NAME;
@@ -328,7 +328,7 @@ static void ql_release_to_lrg_buf_free_list(struct ql3_adapter *qdev,
 					     qdev->lrg_buffer_len -
 					     QL_HEADER_SPACE,
 					     PCI_DMA_FROMDEVICE);
-			err = pci_dma_mapping_error(map);
+			err = pci_dma_mapping_error(qdev->pdev, map);
 			if(err) {
 				printk(KERN_ERR "%s: PCI mapping failed with error: %d\n",
 				       qdev->ndev->name, err);
@@ -1919,7 +1919,7 @@ static int ql_populate_free_queue(struct ql3_adapter *qdev)
 						     QL_HEADER_SPACE,
 						     PCI_DMA_FROMDEVICE);
 
-				err = pci_dma_mapping_error(map);
+				err = pci_dma_mapping_error(qdev->pdev, map);
 				if(err) {
 					printk(KERN_ERR "%s: PCI mapping failed with error: %d\n",
 					       qdev->ndev->name, err);
@@ -2454,7 +2454,7 @@ static int ql_send_map(struct ql3_adapter *qdev,
 	 */
 	map = pci_map_single(qdev->pdev, skb->data, len, PCI_DMA_TODEVICE);
 
-	err = pci_dma_mapping_error(map);
+	err = pci_dma_mapping_error(qdev->pdev, map);
 	if(err) {
 		printk(KERN_ERR "%s: PCI mapping failed with error: %d\n",
 		       qdev->ndev->name, err);
@@ -2487,7 +2487,7 @@ static int ql_send_map(struct ql3_adapter *qdev,
 						     sizeof(struct oal),
 						     PCI_DMA_TODEVICE);
 
-				err = pci_dma_mapping_error(map);
+				err = pci_dma_mapping_error(qdev->pdev, map);
 				if(err) {
 
 					printk(KERN_ERR "%s: PCI mapping outbound address list with error: %d\n",
@@ -2514,7 +2514,7 @@ static int ql_send_map(struct ql3_adapter *qdev,
 					 frag->page_offset, frag->size,
 					 PCI_DMA_TODEVICE);
 
-			err = pci_dma_mapping_error(map);
+			err = pci_dma_mapping_error(qdev->pdev, map);
 			if(err) {
 				printk(KERN_ERR "%s: PCI mapping frags failed with error: %d\n",
 				       qdev->ndev->name, err);
@@ -2916,7 +2916,7 @@ static int ql_alloc_large_buffers(struct ql3_adapter *qdev)
 					     QL_HEADER_SPACE,
 					     PCI_DMA_FROMDEVICE);
 
-			err = pci_dma_mapping_error(map);
+			err = pci_dma_mapping_error(qdev->pdev, map);
 			if(err) {
 				printk(KERN_ERR "%s: PCI mapping failed with error: %d\n",
 				       qdev->ndev->name, err);
@@ -3495,8 +3495,6 @@ static void ql_set_mac_info(struct ql3_adapter *qdev)
 	case ISP_CONTROL_FN0_NET:
 		qdev->mac_index = 0;
 		qdev->mac_ob_opcode = OUTBOUND_MAC_IOCB | func_number;
-		qdev->tcp_ob_opcode = OUTBOUND_TCP_IOCB | func_number;
-		qdev->update_ob_opcode = UPDATE_NCB_IOCB | func_number;
 		qdev->mb_bit_mask = FN0_MA_BITS_MASK;
 		qdev->PHYAddr = PORT0_PHY_ADDRESS;
 		if (port_status & PORT_STATUS_SM0)
@@ -3508,8 +3506,6 @@ static void ql_set_mac_info(struct ql3_adapter *qdev)
 	case ISP_CONTROL_FN1_NET:
 		qdev->mac_index = 1;
 		qdev->mac_ob_opcode = OUTBOUND_MAC_IOCB | func_number;
-		qdev->tcp_ob_opcode = OUTBOUND_TCP_IOCB | func_number;
-		qdev->update_ob_opcode = UPDATE_NCB_IOCB | func_number;
 		qdev->mb_bit_mask = FN1_MA_BITS_MASK;
 		qdev->PHYAddr = PORT1_PHY_ADDRESS;
 		if (port_status & PORT_STATUS_SM1)
@@ -3730,14 +3726,6 @@ static int ql3xxx_open(struct net_device *ndev)
 	return (ql_adapter_up(qdev));
 }
 
-static void ql3xxx_set_multicast_list(struct net_device *ndev)
-{
-	/*
-	 * We are manually parsing the list in the net_device structure.
-	 */
-	return;
-}
-
 static int ql3xxx_set_mac_address(struct net_device *ndev, void *p)
 {
 	struct ql3_adapter *qdev = (struct ql3_adapter *)netdev_priv(ndev);
@@ -4007,7 +3995,11 @@ static int __devinit ql3xxx_probe(struct pci_dev *pdev,
 	ndev->open = ql3xxx_open;
 	ndev->hard_start_xmit = ql3xxx_send;
 	ndev->stop = ql3xxx_close;
-	ndev->set_multicast_list = ql3xxx_set_multicast_list;
+	/* ndev->set_multicast_list
+	 * This device is one side of a two-function adapter
+	 * (NIC and iSCSI).  Promiscuous mode setting/clearing is
+	 * not allowed from the NIC side.
+	 */
 	SET_ETHTOOL_OPS(ndev, &ql3xxx_ethtool_ops);
 	ndev->set_mac_address = ql3xxx_set_mac_address;
 	ndev->tx_timeout = ql3xxx_tx_timeout;
@@ -4040,9 +4032,6 @@ static int __devinit ql3xxx_probe(struct pci_dev *pdev,
 
 	ndev->tx_queue_len = NUM_REQ_Q_ENTRIES;
 
-	/* Turn off support for multicasting */
-	ndev->flags &= ~IFF_MULTICAST;
-
 	/* Record PCI bus information. */
 	ql_get_board_info(qdev);
 
diff --git a/drivers/net/qla3xxx.h b/drivers/net/qla3xxx.h
index 58a086fddec6..7113e71b15a1 100644
--- a/drivers/net/qla3xxx.h
+++ b/drivers/net/qla3xxx.h
@@ -14,24 +14,14 @@
 
 #define OPCODE_OB_MAC_IOCB_FN0          0x01
 #define OPCODE_OB_MAC_IOCB_FN2          0x21
-#define OPCODE_OB_TCP_IOCB_FN0          0x03
-#define OPCODE_OB_TCP_IOCB_FN2          0x23
-#define OPCODE_UPDATE_NCB_IOCB_FN0      0x00
-#define OPCODE_UPDATE_NCB_IOCB_FN2      0x20
 
-#define OPCODE_UPDATE_NCB_IOCB      0xF0
 #define OPCODE_IB_MAC_IOCB          0xF9
 #define OPCODE_IB_3032_MAC_IOCB     0x09
 #define OPCODE_IB_IP_IOCB           0xFA
 #define OPCODE_IB_3032_IP_IOCB      0x0A
-#define OPCODE_IB_TCP_IOCB          0xFB
-#define OPCODE_DUMP_PROTO_IOCB      0xFE
-#define OPCODE_BUFFER_ALERT_IOCB    0xFB
 
 #define OPCODE_FUNC_ID_MASK                 0x30
 #define OUTBOUND_MAC_IOCB                   0x01	/* plus function bits */
-#define OUTBOUND_TCP_IOCB                   0x03	/* plus function bits */
-#define UPDATE_NCB_IOCB                     0x00	/* plus function bits */
 
 #define FN0_MA_BITS_MASK    0x00
 #define FN1_MA_BITS_MASK    0x80
@@ -159,75 +149,6 @@ struct ob_ip_iocb_rsp {
 	__le32 reserved2;
 };
 
-struct ob_tcp_iocb_req {
-	u8 opcode;
-
-	u8 flags0;
-#define OB_TCP_IOCB_REQ_P       0x80
-#define OB_TCP_IOCB_REQ_CI      0x20
-#define OB_TCP_IOCB_REQ_H       0x10
-#define OB_TCP_IOCB_REQ_LN      0x08
-#define OB_TCP_IOCB_REQ_K       0x04
-#define OB_TCP_IOCB_REQ_D       0x02
-#define OB_TCP_IOCB_REQ_I       0x01
-
-	u8 flags1;
-#define OB_TCP_IOCB_REQ_OSM     0x40
-#define OB_TCP_IOCB_REQ_URG     0x20
-#define OB_TCP_IOCB_REQ_ACK     0x10
-#define OB_TCP_IOCB_REQ_PSH     0x08
-#define OB_TCP_IOCB_REQ_RST     0x04
-#define OB_TCP_IOCB_REQ_SYN     0x02
-#define OB_TCP_IOCB_REQ_FIN     0x01
-
-	u8 options_len;
-#define OB_TCP_IOCB_REQ_OMASK   0xF0
-#define OB_TCP_IOCB_REQ_SHIFT   4
-
-	__le32 transaction_id;
-	__le32 data_len;
-	__le32 hncb_ptr_low;
-	__le32 hncb_ptr_high;
-	__le32 buf_addr0_low;
-	__le32 buf_addr0_high;
-	__le32 buf_0_len;
-	__le32 buf_addr1_low;
-	__le32 buf_addr1_high;
-	__le32 buf_1_len;
-	__le32 buf_addr2_low;
-	__le32 buf_addr2_high;
-	__le32 buf_2_len;
-	__le32 time_stamp;
-	__le32 reserved1;
-};
-
-struct ob_tcp_iocb_rsp {
-	u8 opcode;
-
-	u8 flags0;
-#define OB_TCP_IOCB_RSP_C       0x20
-#define OB_TCP_IOCB_RSP_H       0x10
-#define OB_TCP_IOCB_RSP_LN      0x08
-#define OB_TCP_IOCB_RSP_K       0x04
-#define OB_TCP_IOCB_RSP_D       0x02
-#define OB_TCP_IOCB_RSP_I       0x01
-
-	u8 flags1;
-#define OB_TCP_IOCB_RSP_E       0x10
-#define OB_TCP_IOCB_RSP_W       0x08
-#define OB_TCP_IOCB_RSP_P       0x04
-#define OB_TCP_IOCB_RSP_T       0x02
-#define OB_TCP_IOCB_RSP_F       0x01
-
-	u8 state;
-#define OB_TCP_IOCB_RSP_SMASK   0xF0
-#define OB_TCP_IOCB_RSP_SHIFT   4
-
-	__le32 transaction_id;
-	__le32 local_ncb_ptr;
-	__le32 reserved0;
-};
-
 struct ib_ip_iocb_rsp {
 	u8 opcode;
 #define IB_IP_IOCB_RSP_3032_V   0x80
@@ -256,25 +177,6 @@ struct ib_ip_iocb_rsp {
 	__le32 ial_high;
 };
 
-struct ib_tcp_iocb_rsp {
-	u8 opcode;
-	u8 flags;
-#define IB_TCP_IOCB_RSP_P       0x80
-#define IB_TCP_IOCB_RSP_T       0x40
-#define IB_TCP_IOCB_RSP_D       0x20
-#define IB_TCP_IOCB_RSP_N       0x10
-#define IB_TCP_IOCB_RSP_IP      0x03
-#define IB_TCP_FLAG_MASK        0xf0
-#define IB_TCP_FLAG_IOCB_SYN    0x00
-
-#define TCP_IB_RSP_FLAGS(x) (x->flags & ~IB_TCP_FLAG_MASK)
-
-	__le16 length;
-	__le32 hncb_ref_num;
-	__le32 ial_low;
-	__le32 ial_high;
-};
-
 struct net_rsp_iocb {
 	u8 opcode;
 	u8 flags;
@@ -1266,20 +1168,13 @@ struct ql3_adapter {
 	u32 small_buf_release_cnt;
 	u32 small_buf_total_size;
 
-	/* ISR related, saves status for DPC. */
-	u32 control_status;
-
 	struct eeprom_data nvram_data;
-	struct timer_list ioctl_timer;
 	u32 port_link_state;
-	u32 last_rsp_offset;
 
 	/* 4022 specific */
 	u32 mac_index;		/* Driver's MAC number can be 0 or 1 for first and second networking functions respectively */
 	u32 PHYAddr;		/* Address of PHY 0x1e00 Port 0 and 0x1f00 Port 1 */
 	u32 mac_ob_opcode;	/* Opcode to use on mac transmission */
-	u32 tcp_ob_opcode;	/* Opcode to use on tcp transmission */
-	u32 update_ob_opcode;	/* Opcode to use for updating NCB */
 	u32 mb_bit_mask;	/* MA Bits mask to use on transmission */
 	u32 numPorts;
 	struct workqueue_struct *workqueue;
diff --git a/drivers/net/r6040.c b/drivers/net/r6040.c
index 6531ff565c54..5d86281d9363 100644
--- a/drivers/net/r6040.c
+++ b/drivers/net/r6040.c
@@ -24,7 +24,6 @@
 
 #include <linux/kernel.h>
 #include <linux/module.h>
-#include <linux/version.h>
 #include <linux/moduleparam.h>
 #include <linux/string.h>
 #include <linux/timer.h>
diff --git a/drivers/net/r8169.c b/drivers/net/r8169.c
index a3e3895e5032..0f6f9747d255 100644
--- a/drivers/net/r8169.c
+++ b/drivers/net/r8169.c
@@ -2792,7 +2792,7 @@ static int rtl8169_rx_interrupt(struct net_device *dev,
 					pkt_size, PCI_DMA_FROMDEVICE);
 				rtl8169_mark_to_asic(desc, tp->rx_buf_sz);
 			} else {
-				pci_unmap_single(pdev, addr, pkt_size,
+				pci_unmap_single(pdev, addr, tp->rx_buf_sz,
 						 PCI_DMA_FROMDEVICE);
 				tp->Rx_skbuff[entry] = NULL;
 			}
diff --git a/drivers/net/s2io.c b/drivers/net/s2io.c
index 9dae40ccf048..a2b073097e5c 100644
--- a/drivers/net/s2io.c
+++ b/drivers/net/s2io.c
@@ -2512,8 +2512,8 @@ static void stop_nic(struct s2io_nic *nic)
  *   Return Value:
  *  SUCCESS on success or an appropriate -ve value on failure.
  */
-
-static int fill_rx_buffers(struct ring_info *ring, int from_card_up)
+static int fill_rx_buffers(struct s2io_nic *nic, struct ring_info *ring,
+				int from_card_up)
 {
 	struct sk_buff *skb;
 	struct RxD_t *rxdp;
@@ -2602,7 +2602,8 @@ static int fill_rx_buffers(struct ring_info *ring, int from_card_up)
 			rxdp1->Buffer0_ptr = pci_map_single
 			    (ring->pdev, skb->data, size - NET_IP_ALIGN,
 				PCI_DMA_FROMDEVICE);
-			if(pci_dma_mapping_error(rxdp1->Buffer0_ptr))
+			if (pci_dma_mapping_error(nic->pdev,
+						rxdp1->Buffer0_ptr))
 				goto pci_map_failed;
 
 			rxdp->Control_2 =
@@ -2636,7 +2637,8 @@ static int fill_rx_buffers(struct ring_info *ring, int from_card_up)
 				rxdp3->Buffer0_ptr =
 				   pci_map_single(ring->pdev, ba->ba_0,
 					BUF0_LEN, PCI_DMA_FROMDEVICE);
-				if (pci_dma_mapping_error(rxdp3->Buffer0_ptr))
+			if (pci_dma_mapping_error(nic->pdev,
+						rxdp3->Buffer0_ptr))
 					goto pci_map_failed;
 			} else
 				pci_dma_sync_single_for_device(ring->pdev,
@@ -2655,7 +2657,8 @@ static int fill_rx_buffers(struct ring_info *ring, int from_card_up)
 				(ring->pdev, skb->data, ring->mtu + 4,
 						PCI_DMA_FROMDEVICE);
 
-				if (pci_dma_mapping_error(rxdp3->Buffer2_ptr))
+				if (pci_dma_mapping_error(nic->pdev,
+							rxdp3->Buffer2_ptr))
 					goto pci_map_failed;
 
 				if (from_card_up) {
@@ -2664,8 +2667,8 @@ static int fill_rx_buffers(struct ring_info *ring, int from_card_up)
 						ba->ba_1, BUF1_LEN,
 						PCI_DMA_FROMDEVICE);
 
-					if (pci_dma_mapping_error
-						(rxdp3->Buffer1_ptr)) {
+					if (pci_dma_mapping_error(nic->pdev,
+						rxdp3->Buffer1_ptr)) {
 						pci_unmap_single
 							(ring->pdev,
 						    (dma_addr_t)(unsigned long)
@@ -2806,9 +2809,9 @@ static void free_rx_buffers(struct s2io_nic *sp)
 	}
 }
 
-static int s2io_chk_rx_buffers(struct ring_info *ring)
+static int s2io_chk_rx_buffers(struct s2io_nic *nic, struct ring_info *ring)
 {
-	if (fill_rx_buffers(ring, 0) == -ENOMEM) {
+	if (fill_rx_buffers(nic, ring, 0) == -ENOMEM) {
 		DBG_PRINT(INFO_DBG, "%s:Out of memory", ring->dev->name);
 		DBG_PRINT(INFO_DBG, " in Rx Intr!!\n");
 	}
@@ -2848,7 +2851,7 @@ static int s2io_poll_msix(struct napi_struct *napi, int budget)
 		return 0;
 
 	pkts_processed = rx_intr_handler(ring, budget);
-	s2io_chk_rx_buffers(ring);
+	s2io_chk_rx_buffers(nic, ring);
 
 	if (pkts_processed < budget_org) {
 		netif_rx_complete(dev, napi);
@@ -2882,7 +2885,7 @@ static int s2io_poll_inta(struct napi_struct *napi, int budget)
 	for (i = 0; i < config->rx_ring_num; i++) {
 		ring = &mac_control->rings[i];
 		ring_pkts_processed = rx_intr_handler(ring, budget);
-		s2io_chk_rx_buffers(ring);
+		s2io_chk_rx_buffers(nic, ring);
 		pkts_processed += ring_pkts_processed;
 		budget -= ring_pkts_processed;
 		if (budget <= 0)
@@ -2939,7 +2942,8 @@ static void s2io_netpoll(struct net_device *dev)
 		rx_intr_handler(&mac_control->rings[i], 0);
 
 	for (i = 0; i < config->rx_ring_num; i++) {
-		if (fill_rx_buffers(&mac_control->rings[i], 0) == -ENOMEM) {
+		if (fill_rx_buffers(nic, &mac_control->rings[i], 0) ==
+				-ENOMEM) {
 			DBG_PRINT(INFO_DBG, "%s:Out of memory", dev->name);
 			DBG_PRINT(INFO_DBG, " in Rx Netpoll!!\n");
 			break;
@@ -3139,7 +3143,7 @@ static void tx_intr_handler(struct fifo_info *fifo_data)
 		pkt_cnt++;
 
 		/* Updating the statistics block */
-		nic->stats.tx_bytes += skb->len;
+		nic->dev->stats.tx_bytes += skb->len;
 		nic->mac_control.stats_info->sw_stat.mem_freed += skb->truesize;
 		dev_kfree_skb_irq(skb);
 
@@ -4235,14 +4239,14 @@ static int s2io_xmit(struct sk_buff *skb, struct net_device *dev)
 		txdp->Buffer_Pointer = pci_map_single(sp->pdev,
 					fifo->ufo_in_band_v,
 					sizeof(u64), PCI_DMA_TODEVICE);
-		if (pci_dma_mapping_error(txdp->Buffer_Pointer))
+		if (pci_dma_mapping_error(sp->pdev, txdp->Buffer_Pointer))
 			goto pci_map_failed;
 		txdp++;
 	}
 
 	txdp->Buffer_Pointer = pci_map_single
 	    (sp->pdev, skb->data, frg_len, PCI_DMA_TODEVICE);
-	if (pci_dma_mapping_error(txdp->Buffer_Pointer))
+	if (pci_dma_mapping_error(sp->pdev, txdp->Buffer_Pointer))
 		goto pci_map_failed;
 
 	txdp->Host_Control = (unsigned long) skb;
@@ -4345,7 +4349,7 @@ static irqreturn_t s2io_msix_ring_handle(int irq, void *dev_id)
 		netif_rx_schedule(dev, &ring->napi);
 	} else {
 		rx_intr_handler(ring, 0);
-		s2io_chk_rx_buffers(ring);
+		s2io_chk_rx_buffers(sp, ring);
 	}
 
 	return IRQ_HANDLED;
@@ -4826,7 +4830,7 @@ static irqreturn_t s2io_isr(int irq, void *dev_id)
 		 */
 		if (!config->napi) {
 			for (i = 0; i < config->rx_ring_num; i++)
-				s2io_chk_rx_buffers(&mac_control->rings[i]);
+				s2io_chk_rx_buffers(sp, &mac_control->rings[i]);
 		}
 		writeq(sp->general_int_mask, &bar0->general_int_mask);
 		readl(&bar0->general_int_status);
@@ -4892,25 +4896,42 @@ static struct net_device_stats *s2io_get_stats(struct net_device *dev)
 	/* Configure Stats for immediate updt */
 	s2io_updt_stats(sp);
 
+	/* Using sp->stats as a staging area, because reset (due to mtu
+	   change, for example) will clear some hardware counters */
+	dev->stats.tx_packets +=
+		le32_to_cpu(mac_control->stats_info->tmac_frms) - 
+		sp->stats.tx_packets;
 	sp->stats.tx_packets =
 		le32_to_cpu(mac_control->stats_info->tmac_frms);
+	dev->stats.tx_errors +=
+		le32_to_cpu(mac_control->stats_info->tmac_any_err_frms) -
+		sp->stats.tx_errors;
 	sp->stats.tx_errors =
 		le32_to_cpu(mac_control->stats_info->tmac_any_err_frms);
+	dev->stats.rx_errors +=
+		le64_to_cpu(mac_control->stats_info->rmac_drop_frms) -
+		sp->stats.rx_errors;
 	sp->stats.rx_errors =
 		le64_to_cpu(mac_control->stats_info->rmac_drop_frms);
+	dev->stats.multicast =
+		le32_to_cpu(mac_control->stats_info->rmac_vld_mcst_frms) - 
+		sp->stats.multicast;
 	sp->stats.multicast =
 		le32_to_cpu(mac_control->stats_info->rmac_vld_mcst_frms);
+	dev->stats.rx_length_errors =
+		le64_to_cpu(mac_control->stats_info->rmac_long_frms) - 
+		sp->stats.rx_length_errors;
 	sp->stats.rx_length_errors =
 		le64_to_cpu(mac_control->stats_info->rmac_long_frms);
 
 	/* collect per-ring rx_packets and rx_bytes */
-	sp->stats.rx_packets = sp->stats.rx_bytes = 0;
+	dev->stats.rx_packets = dev->stats.rx_bytes = 0;
 	for (i = 0; i < config->rx_ring_num; i++) {
-		sp->stats.rx_packets += mac_control->rings[i].rx_packets;
-		sp->stats.rx_bytes += mac_control->rings[i].rx_bytes;
+		dev->stats.rx_packets += mac_control->rings[i].rx_packets;
+		dev->stats.rx_bytes += mac_control->rings[i].rx_bytes;
 	}
 
-	return (&sp->stats);
+	return (&dev->stats);
 }
 
 /**
@@ -6859,7 +6880,7 @@ static int set_rxd_buffer_pointer(struct s2io_nic *sp, struct RxD_t *rxdp,
 				pci_map_single( sp->pdev, (*skb)->data,
 					size - NET_IP_ALIGN,
 					PCI_DMA_FROMDEVICE);
-			if (pci_dma_mapping_error(rxdp1->Buffer0_ptr))
+			if (pci_dma_mapping_error(sp->pdev, rxdp1->Buffer0_ptr))
 				goto memalloc_failed;
 			rxdp->Host_Control = (unsigned long) (*skb);
 		}
@@ -6886,12 +6907,13 @@ static int set_rxd_buffer_pointer(struct s2io_nic *sp, struct RxD_t *rxdp,
 				pci_map_single(sp->pdev, (*skb)->data,
 					       dev->mtu + 4,
 					       PCI_DMA_FROMDEVICE);
-			if (pci_dma_mapping_error(rxdp3->Buffer2_ptr))
+			if (pci_dma_mapping_error(sp->pdev, rxdp3->Buffer2_ptr))
 				goto memalloc_failed;
 			rxdp3->Buffer0_ptr = *temp0 =
 				pci_map_single( sp->pdev, ba->ba_0, BUF0_LEN,
 						PCI_DMA_FROMDEVICE);
-			if (pci_dma_mapping_error(rxdp3->Buffer0_ptr)) {
+			if (pci_dma_mapping_error(sp->pdev,
+						rxdp3->Buffer0_ptr)) {
 				pci_unmap_single (sp->pdev,
 					(dma_addr_t)rxdp3->Buffer2_ptr,
 					dev->mtu + 4, PCI_DMA_FROMDEVICE);
@@ -6903,7 +6925,8 @@ static int set_rxd_buffer_pointer(struct s2io_nic *sp, struct RxD_t *rxdp,
 			rxdp3->Buffer1_ptr = *temp1 =
 				pci_map_single(sp->pdev, ba->ba_1, BUF1_LEN,
 						PCI_DMA_FROMDEVICE);
-			if (pci_dma_mapping_error(rxdp3->Buffer1_ptr)) {
+			if (pci_dma_mapping_error(sp->pdev,
+						rxdp3->Buffer1_ptr)) {
 				pci_unmap_single (sp->pdev,
 					(dma_addr_t)rxdp3->Buffer0_ptr,
 					BUF0_LEN, PCI_DMA_FROMDEVICE);
@@ -7187,7 +7210,7 @@ static int s2io_card_up(struct s2io_nic * sp)
 
 	for (i = 0; i < config->rx_ring_num; i++) {
 		mac_control->rings[i].mtu = dev->mtu;
-		ret = fill_rx_buffers(&mac_control->rings[i], 1);
+		ret = fill_rx_buffers(sp, &mac_control->rings[i], 1);
 		if (ret) {
 			DBG_PRINT(ERR_DBG, "%s: Out of memory in Open\n",
 				  dev->name);
@@ -7413,7 +7436,7 @@ static int rx_osm_handler(struct ring_info *ring_data, struct RxD_t * rxdp)
 		if (err_mask != 0x5) {
 			DBG_PRINT(ERR_DBG, "%s: Rx error Value: 0x%x\n",
 				dev->name, err_mask);
-			sp->stats.rx_crc_errors++;
+			dev->stats.rx_crc_errors++;
 			sp->mac_control.stats_info->sw_stat.mem_freed
 				+= skb->truesize;
 			dev_kfree_skb(skb);
diff --git a/drivers/net/sfc/rx.c b/drivers/net/sfc/rx.c
index 601b001437c0..0d27dd39bc09 100644
--- a/drivers/net/sfc/rx.c
+++ b/drivers/net/sfc/rx.c
@@ -233,7 +233,7 @@ static inline int efx_init_rx_buffer_skb(struct efx_rx_queue *rx_queue,
 					  rx_buf->data, rx_buf->len,
 					  PCI_DMA_FROMDEVICE);
 
-	if (unlikely(pci_dma_mapping_error(rx_buf->dma_addr))) {
+	if (unlikely(pci_dma_mapping_error(efx->pci_dev, rx_buf->dma_addr))) {
 		dev_kfree_skb_any(rx_buf->skb);
 		rx_buf->skb = NULL;
 		return -EIO;
@@ -275,7 +275,7 @@ static inline int efx_init_rx_buffer_page(struct efx_rx_queue *rx_queue,
 					0, efx_rx_buf_size(efx),
 					PCI_DMA_FROMDEVICE);
 
-		if (unlikely(pci_dma_mapping_error(dma_addr))) {
+		if (unlikely(pci_dma_mapping_error(efx->pci_dev, dma_addr))) {
 			__free_pages(rx_buf->page, efx->rx_buffer_order);
 			rx_buf->page = NULL;
 			return -EIO;
diff --git a/drivers/net/sfc/tx.c b/drivers/net/sfc/tx.c
index 5cdd082ab8f6..5e8374ab28ee 100644
--- a/drivers/net/sfc/tx.c
+++ b/drivers/net/sfc/tx.c
@@ -172,7 +172,7 @@ static inline int efx_enqueue_skb(struct efx_tx_queue *tx_queue,
 
 	/* Process all fragments */
 	while (1) {
-		if (unlikely(pci_dma_mapping_error(dma_addr)))
+		if (unlikely(pci_dma_mapping_error(pci_dev, dma_addr)))
 			goto pci_err;
 
 		/* Store fields for marking in the per-fragment final
@@ -661,7 +661,8 @@ efx_tsoh_heap_alloc(struct efx_tx_queue *tx_queue, size_t header_len)
 	tsoh->dma_addr = pci_map_single(tx_queue->efx->pci_dev,
 					TSOH_BUFFER(tsoh), header_len,
 					PCI_DMA_TODEVICE);
-	if (unlikely(pci_dma_mapping_error(tsoh->dma_addr))) {
+	if (unlikely(pci_dma_mapping_error(tx_queue->efx->pci_dev,
+					   tsoh->dma_addr))) {
 		kfree(tsoh);
 		return NULL;
 	}
@@ -863,7 +864,7 @@ static inline int tso_get_fragment(struct tso_state *st, struct efx_nic *efx,
 
 	st->ifc.unmap_addr = pci_map_page(efx->pci_dev, page, page_off,
 					  len, PCI_DMA_TODEVICE);
-	if (likely(!pci_dma_mapping_error(st->ifc.unmap_addr))) {
+	if (likely(!pci_dma_mapping_error(efx->pci_dev, st->ifc.unmap_addr))) {
 		st->ifc.unmap_len = len;
 		st->ifc.len = len;
 		st->ifc.dma_addr = st->ifc.unmap_addr;
diff --git a/drivers/net/sh_eth.c b/drivers/net/sh_eth.c
index c69ba1395fa9..1c370e6aa641 100644
--- a/drivers/net/sh_eth.c
+++ b/drivers/net/sh_eth.c
@@ -1,7 +1,7 @@
 /*
  *  SuperH Ethernet device driver
  *
- *  Copyright (C) 2006,2007 Nobuhiro Iwamatsu
+ *  Copyright (C) 2006-2008 Nobuhiro Iwamatsu
  *  Copyright (C) 2008 Renesas Solutions Corp.
  *
  *  This program is free software; you can redistribute it and/or modify it
@@ -20,7 +20,6 @@
  *  the file called "COPYING".
  */
 
-#include <linux/version.h>
 #include <linux/init.h>
 #include <linux/dma-mapping.h>
 #include <linux/etherdevice.h>
@@ -34,6 +33,29 @@
 
 #include "sh_eth.h"
 
+/* CPU <-> EDMAC endian convert */
+static inline __u32 cpu_to_edmac(struct sh_eth_private *mdp, u32 x)
+{
+	switch (mdp->edmac_endian) {
+	case EDMAC_LITTLE_ENDIAN:
+		return cpu_to_le32(x);
+	case EDMAC_BIG_ENDIAN:
+		return cpu_to_be32(x);
+	}
+	return x;
+}
+
+static inline __u32 edmac_to_cpu(struct sh_eth_private *mdp, u32 x)
+{
+	switch (mdp->edmac_endian) {
+	case EDMAC_LITTLE_ENDIAN:
+		return le32_to_cpu(x);
+	case EDMAC_BIG_ENDIAN:
+		return be32_to_cpu(x);
+	}
+	return x;
+}
+
 /*
  * Program the hardware MAC address from dev->dev_addr.
  */
@@ -143,13 +165,39 @@ static struct mdiobb_ops bb_ops = {
 	.get_mdio_data = sh_get_mdio,
 };
 
+/* Chip Reset */
 static void sh_eth_reset(struct net_device *ndev)
 {
 	u32 ioaddr = ndev->base_addr;
 
+#if defined(CONFIG_CPU_SUBTYPE_SH7763)
+	int cnt = 100;
+
+	ctrl_outl(EDSR_ENALL, ioaddr + EDSR);
+	ctrl_outl(ctrl_inl(ioaddr + EDMR) | EDMR_SRST, ioaddr + EDMR);
+	while (cnt > 0) {
+		if (!(ctrl_inl(ioaddr + EDMR) & 0x3))
+			break;
+		mdelay(1);
+		cnt--;
+	}
+	if (cnt < 0)
+		printk(KERN_ERR "Device reset fail\n");
+
+	/* Table Init */
+	ctrl_outl(0x0, ioaddr + TDLAR);
+	ctrl_outl(0x0, ioaddr + TDFAR);
+	ctrl_outl(0x0, ioaddr + TDFXR);
+	ctrl_outl(0x0, ioaddr + TDFFR);
+	ctrl_outl(0x0, ioaddr + RDLAR);
+	ctrl_outl(0x0, ioaddr + RDFAR);
+	ctrl_outl(0x0, ioaddr + RDFXR);
+	ctrl_outl(0x0, ioaddr + RDFFR);
+#else
 	ctrl_outl(ctrl_inl(ioaddr + EDMR) | EDMR_SRST, ioaddr + EDMR);
 	mdelay(3);
 	ctrl_outl(ctrl_inl(ioaddr + EDMR) & ~EDMR_SRST, ioaddr + EDMR);
+#endif
 }
 
 /* free skb and descriptor buffer */
@@ -180,6 +228,7 @@ static void sh_eth_ring_free(struct net_device *ndev)
 /* format skb and descriptor buffer */
 static void sh_eth_ring_format(struct net_device *ndev)
 {
+	u32 ioaddr = ndev->base_addr, reserve = 0;
 	struct sh_eth_private *mdp = netdev_priv(ndev);
 	int i;
 	struct sk_buff *skb;
@@ -201,22 +250,41 @@ static void sh_eth_ring_format(struct net_device *ndev)
 		mdp->rx_skbuff[i] = skb;
 		if (skb == NULL)
 			break;
-		skb->dev = ndev;	/* Mark as being used by this device. */
+		skb->dev = ndev; /* Mark as being used by this device. */
+#if defined(CONFIG_CPU_SUBTYPE_SH7763)
+		reserve = SH7763_SKB_ALIGN
+			- ((uint32_t)skb->data & (SH7763_SKB_ALIGN-1));
+		if (reserve)
+			skb_reserve(skb, reserve);
+#else
 		skb_reserve(skb, RX_OFFSET);
-
+#endif
 		/* RX descriptor */
 		rxdesc = &mdp->rx_ring[i];
 		rxdesc->addr = (u32)skb->data & ~0x3UL;
-		rxdesc->status = cpu_to_le32(RD_RACT | RD_RFP);
+		rxdesc->status = cpu_to_edmac(mdp, RD_RACT | RD_RFP);
 
 		/* The size of the buffer is 16 byte boundary. */
 		rxdesc->buffer_length = (mdp->rx_buf_sz + 16) & ~0x0F;
+		/* Rx descriptor address set */
+		if (i == 0) {
+			ctrl_outl((u32)rxdesc, ioaddr + RDLAR);
+#if defined(CONFIG_CPU_SUBTYPE_SH7763)
+			ctrl_outl((u32)rxdesc, ioaddr + RDFAR);
+#endif
+		}
 	}
 
+	/* Rx descriptor address set */
+#if defined(CONFIG_CPU_SUBTYPE_SH7763)
+	ctrl_outl((u32)rxdesc, ioaddr + RDFXR);
+	ctrl_outl(0x1, ioaddr + RDFFR);
+#endif
+
 	mdp->dirty_rx = (u32) (i - RX_RING_SIZE);
 
 	/* Mark the last entry as wrapping the ring. */
-	rxdesc->status |= cpu_to_le32(RC_RDEL);
+	rxdesc->status |= cpu_to_edmac(mdp, RD_RDEL);
 
 	memset(mdp->tx_ring, 0, tx_ringsize);
 
@@ -224,11 +292,24 @@ static void sh_eth_ring_format(struct net_device *ndev)
 	for (i = 0; i < TX_RING_SIZE; i++) {
 		mdp->tx_skbuff[i] = NULL;
 		txdesc = &mdp->tx_ring[i];
-		txdesc->status = cpu_to_le32(TD_TFP);
+		txdesc->status = cpu_to_edmac(mdp, TD_TFP);
 		txdesc->buffer_length = 0;
+		if (i == 0) {
+			/* Tx descriptor address set */
+			ctrl_outl((u32)txdesc, ioaddr + TDLAR);
+#if defined(CONFIG_CPU_SUBTYPE_SH7763)
+			ctrl_outl((u32)txdesc, ioaddr + TDFAR);
+#endif
+		}
 	}
 
-	txdesc->status |= cpu_to_le32(TD_TDLE);
+	/* Tx descriptor address set */
+#if defined(CONFIG_CPU_SUBTYPE_SH7763)
+	ctrl_outl((u32)txdesc, ioaddr + TDFXR);
+	ctrl_outl(0x1, ioaddr + TDFFR);
+#endif
+
+	txdesc->status |= cpu_to_edmac(mdp, TD_TDLE);
 }
 
 /* Get skb and descriptor buffer */
@@ -311,31 +392,43 @@ static int sh_eth_dev_init(struct net_device *ndev)
 	/* Soft Reset */
 	sh_eth_reset(ndev);
 
-	ctrl_outl(RPADIR_PADS1, ioaddr + RPADIR);	/* SH7712-DMA-RX-PAD2 */
+	/* Descriptor format */
+	sh_eth_ring_format(ndev);
+	ctrl_outl(RPADIR_INIT, ioaddr + RPADIR);
 
 	/* all sh_eth int mask */
 	ctrl_outl(0, ioaddr + EESIPR);
 
-	/* FIFO size set */
+#if defined(CONFIG_CPU_SUBTYPE_SH7763)
+	ctrl_outl(EDMR_EL, ioaddr + EDMR);
+#else
 	ctrl_outl(0, ioaddr + EDMR);	/* Endian change */
+#endif
 
+	/* FIFO size set */
 	ctrl_outl((FIFO_SIZE_T | FIFO_SIZE_R), ioaddr + FDR);
 	ctrl_outl(0, ioaddr + TFTR);
 
+	/* Frame recv control */
 	ctrl_outl(0, ioaddr + RMCR);
 
 	rx_int_var = mdp->rx_int_var = DESC_I_RINT8 | DESC_I_RINT5;
 	tx_int_var = mdp->tx_int_var = DESC_I_TINT2;
 	ctrl_outl(rx_int_var | tx_int_var, ioaddr + TRSCER);
 
+#if defined(CONFIG_CPU_SUBTYPE_SH7763)
+	/* Burst sycle set */
+	ctrl_outl(0x800, ioaddr + BCULR);
+#endif
+
 	ctrl_outl((FIFO_F_D_RFF | FIFO_F_D_RFD), ioaddr + FCFTR);
-	ctrl_outl(0, ioaddr + TRIMD);
 
-	/* Descriptor format */
-	sh_eth_ring_format(ndev);
+#if !defined(CONFIG_CPU_SUBTYPE_SH7763)
+	ctrl_outl(0, ioaddr + TRIMD);
+#endif
 
-	ctrl_outl((u32)mdp->rx_ring, ioaddr + RDLAR);
-	ctrl_outl((u32)mdp->tx_ring, ioaddr + TDLAR);
+	/* Recv frame limit set register */
+	ctrl_outl(RFLR_VALUE, ioaddr + RFLR);
 
 	ctrl_outl(ctrl_inl(ioaddr + EESR), ioaddr + EESR);
 	ctrl_outl((DMAC_M_RFRMER | DMAC_M_ECI | 0x003fffff), ioaddr + EESIPR);
@@ -345,21 +438,26 @@ static int sh_eth_dev_init(struct net_device *ndev)
 		ECMR_ZPF | (mdp->duplex ? ECMR_DM : 0) | ECMR_TE | ECMR_RE;
 
 	ctrl_outl(val, ioaddr + ECMR);
-	ctrl_outl(ECSR_BRCRX | ECSR_PSRTO | ECSR_LCHNG | ECSR_ICD |
-		  ECSIPR_MPDIP, ioaddr + ECSR);
-	ctrl_outl(ECSIPR_BRCRXIP | ECSIPR_PSRTOIP | ECSIPR_LCHNGIP |
-		  ECSIPR_ICDIP | ECSIPR_MPDIP, ioaddr + ECSIPR);
+
+	/* E-MAC Status Register clear */
+	ctrl_outl(ECSR_INIT, ioaddr + ECSR);
+
+	/* E-MAC Interrupt Enable register */
+	ctrl_outl(ECSIPR_INIT, ioaddr + ECSIPR);
 
 	/* Set MAC address */
 	update_mac_address(ndev);
 
 	/* mask reset */
-#if defined(CONFIG_CPU_SUBTYPE_SH7710)
+#if defined(CONFIG_CPU_SUBTYPE_SH7710) || defined(CONFIG_CPU_SUBTYPE_SH7763)
 	ctrl_outl(APR_AP, ioaddr + APR);
 	ctrl_outl(MPR_MP, ioaddr + MPR);
 	ctrl_outl(TPAUSER_UNLIMITED, ioaddr + TPAUSER);
+#endif
+#if defined(CONFIG_CPU_SUBTYPE_SH7710)
 	ctrl_outl(BCFR_UNLIMITED, ioaddr + BCFR);
 #endif
+
 	/* Setting the Rx mode will start the Rx process. */
 	ctrl_outl(EDRRR_R, ioaddr + EDRRR);
 
@@ -379,7 +477,7 @@ static int sh_eth_txfree(struct net_device *ndev)
 	for (; mdp->cur_tx - mdp->dirty_tx > 0; mdp->dirty_tx++) {
 		entry = mdp->dirty_tx % TX_RING_SIZE;
 		txdesc = &mdp->tx_ring[entry];
-		if (txdesc->status & cpu_to_le32(TD_TACT))
+		if (txdesc->status & cpu_to_edmac(mdp, TD_TACT))
 			break;
 		/* Free the original skb. */
 		if (mdp->tx_skbuff[entry]) {
@@ -387,9 +485,9 @@ static int sh_eth_txfree(struct net_device *ndev)
 			mdp->tx_skbuff[entry] = NULL;
 			freeNum++;
 		}
-		txdesc->status = cpu_to_le32(TD_TFP);
+		txdesc->status = cpu_to_edmac(mdp, TD_TFP);
 		if (entry >= TX_RING_SIZE - 1)
-			txdesc->status |= cpu_to_le32(TD_TDLE);
+			txdesc->status |= cpu_to_edmac(mdp, TD_TDLE);
 
 		mdp->stats.tx_packets++;
 		mdp->stats.tx_bytes += txdesc->buffer_length;
@@ -407,11 +505,11 @@ static int sh_eth_rx(struct net_device *ndev)
 	int boguscnt = (mdp->dirty_rx + RX_RING_SIZE) - mdp->cur_rx;
 	struct sk_buff *skb;
 	u16 pkt_len = 0;
-	u32 desc_status;
+	u32 desc_status, reserve = 0;
 
 	rxdesc = &mdp->rx_ring[entry];
-	while (!(rxdesc->status & cpu_to_le32(RD_RACT))) {
-		desc_status = le32_to_cpu(rxdesc->status);
+	while (!(rxdesc->status & cpu_to_edmac(mdp, RD_RACT))) {
+		desc_status = edmac_to_cpu(mdp, rxdesc->status);
 		pkt_len = rxdesc->frame_length;
 
 		if (--boguscnt < 0)
@@ -446,7 +544,7 @@ static int sh_eth_rx(struct net_device *ndev)
 			mdp->stats.rx_packets++;
 			mdp->stats.rx_bytes += pkt_len;
 		}
-		rxdesc->status |= cpu_to_le32(RD_RACT);
+		rxdesc->status |= cpu_to_edmac(mdp, RD_RACT);
 		entry = (++mdp->cur_rx) % RX_RING_SIZE;
 	}
 
@@ -454,28 +552,38 @@ static int sh_eth_rx(struct net_device *ndev)
 	for (; mdp->cur_rx - mdp->dirty_rx > 0; mdp->dirty_rx++) {
 		entry = mdp->dirty_rx % RX_RING_SIZE;
 		rxdesc = &mdp->rx_ring[entry];
+		/* The size of the buffer is 16 byte boundary. */
+		rxdesc->buffer_length = (mdp->rx_buf_sz + 16) & ~0x0F;
+
 		if (mdp->rx_skbuff[entry] == NULL) {
 			skb = dev_alloc_skb(mdp->rx_buf_sz);
 			mdp->rx_skbuff[entry] = skb;
 			if (skb == NULL)
 				break;	/* Better luck next round. */
 			skb->dev = ndev;
+#if defined(CONFIG_CPU_SUBTYPE_SH7763)
+			reserve = SH7763_SKB_ALIGN
+				- ((uint32_t)skb->data & (SH7763_SKB_ALIGN-1));
+			if (reserve)
+				skb_reserve(skb, reserve);
+#else
 			skb_reserve(skb, RX_OFFSET);
+#endif
+			skb->ip_summed = CHECKSUM_NONE;
 			rxdesc->addr = (u32)skb->data & ~0x3UL;
 		}
-		/* The size of the buffer is 16 byte boundary. */
-		rxdesc->buffer_length = (mdp->rx_buf_sz + 16) & ~0x0F;
 		if (entry >= RX_RING_SIZE - 1)
 			rxdesc->status |=
-			cpu_to_le32(RD_RACT | RD_RFP | RC_RDEL);
+				cpu_to_edmac(mdp, RD_RACT | RD_RFP | RD_RDEL);
 		else
 			rxdesc->status |=
-			cpu_to_le32(RD_RACT | RD_RFP);
+				cpu_to_edmac(mdp, RD_RACT | RD_RFP);
 	}
 
 	/* Restart Rx engine if stopped. */
 	/* If we don't need to check status, don't. -KDU */
-	ctrl_outl(EDRRR_R, ndev->base_addr + EDRRR);
+	if (!(ctrl_inl(ndev->base_addr + EDRRR) & EDRRR_R))
+		ctrl_outl(EDRRR_R, ndev->base_addr + EDRRR);
 
 	return 0;
 }
@@ -529,13 +637,14 @@ static void sh_eth_error(struct net_device *ndev, int intr_status)
 			printk(KERN_ERR "Receive Frame Overflow\n");
 		}
 	}
-
+#if !defined(CONFIG_CPU_SUBTYPE_SH7763)
 	if (intr_status & EESR_ADE) {
 		if (intr_status & EESR_TDE) {
 			if (intr_status & EESR_TFE)
 				mdp->stats.tx_fifo_errors++;
 		}
 	}
+#endif
 
 	if (intr_status & EESR_RDE) {
 		/* Receive Descriptor Empty int */
@@ -550,8 +659,11 @@ static void sh_eth_error(struct net_device *ndev, int intr_status)
 		mdp->stats.rx_fifo_errors++;
 		printk(KERN_ERR "Receive FIFO Overflow\n");
 	}
-	if (intr_status &
-	    (EESR_TWB | EESR_TABT | EESR_ADE | EESR_TDE | EESR_TFE)) {
+	if (intr_status & (EESR_TWB | EESR_TABT |
+#if !defined(CONFIG_CPU_SUBTYPE_SH7763)
+			EESR_ADE |
+#endif
+			EESR_TDE | EESR_TFE)) {
 		/* Tx error */
 		u32 edtrr = ctrl_inl(ndev->base_addr + EDTRR);
 		/* dmesg */
@@ -582,17 +694,23 @@ static irqreturn_t sh_eth_interrupt(int irq, void *netdev)
 	ioaddr = ndev->base_addr;
 	spin_lock(&mdp->lock);
 
+	/* Get interrpt stat */
 	intr_status = ctrl_inl(ioaddr + EESR);
 	/* Clear interrupt */
 	ctrl_outl(intr_status, ioaddr + EESR);
 
-	if (intr_status & (EESR_FRC | EESR_RINT8 |
-			   EESR_RINT5 | EESR_RINT4 | EESR_RINT3 | EESR_RINT2 |
-			   EESR_RINT1))
+	if (intr_status & (EESR_FRC | /* Frame recv*/
+			EESR_RMAF | /* Multi cast address recv*/
+			EESR_RRF  | /* Bit frame recv */
+			EESR_RTLF | /* Long frame recv*/
+			EESR_RTSF | /* short frame recv */
+			EESR_PRE  | /* PHY-LSI recv error */
+			EESR_CERF)){ /* recv frame CRC error */
 		sh_eth_rx(ndev);
-	if (intr_status & (EESR_FTC |
-			   EESR_TINT4 | EESR_TINT3 | EESR_TINT2 | EESR_TINT1)) {
+	}
 
+	/* Tx Check */
+	if (intr_status & TX_CHECK) {
 		sh_eth_txfree(ndev);
 		netif_wake_queue(ndev);
 	}
@@ -631,11 +749,32 @@ static void sh_eth_adjust_link(struct net_device *ndev)
 		if (phydev->duplex != mdp->duplex) {
 			new_state = 1;
 			mdp->duplex = phydev->duplex;
+#if defined(CONFIG_CPU_SUBTYPE_SH7763)
+			if (mdp->duplex) { /*  FULL */
+				ctrl_outl(ctrl_inl(ioaddr + ECMR) | ECMR_DM,
+						ioaddr + ECMR);
+			} else {	/* Half */
+				ctrl_outl(ctrl_inl(ioaddr + ECMR) & ~ECMR_DM,
+						ioaddr + ECMR);
+			}
+#endif
 		}
 
 		if (phydev->speed != mdp->speed) {
 			new_state = 1;
 			mdp->speed = phydev->speed;
+#if defined(CONFIG_CPU_SUBTYPE_SH7763)
+			switch (mdp->speed) {
+			case 10: /* 10BASE */
+				ctrl_outl(GECMR_10, ioaddr + GECMR); break;
+			case 100:/* 100BASE */
+				ctrl_outl(GECMR_100, ioaddr + GECMR); break;
+			case 1000: /* 1000BASE */
+				ctrl_outl(GECMR_1000, ioaddr + GECMR); break;
+			default:
+				break;
+			}
+#endif
 		}
 		if (mdp->link == PHY_DOWN) {
 			ctrl_outl((ctrl_inl(ioaddr + ECMR) & ~ECMR_TXF)
@@ -730,7 +869,7 @@ static int sh_eth_open(struct net_device *ndev)
 	/* Set the timer to check for link beat. */
 	init_timer(&mdp->timer);
 	mdp->timer.expires = (jiffies + (24 * HZ)) / 10;/* 2.4 sec. */
-	setup_timer(&mdp->timer, sh_eth_timer, ndev);
+	setup_timer(&mdp->timer, sh_eth_timer, (unsigned long)ndev);
 
 	return ret;
 
@@ -814,13 +953,15 @@ static int sh_eth_start_xmit(struct sk_buff *skb, struct net_device *ndev)
 		txdesc->buffer_length = skb->len;
 
 	if (entry >= TX_RING_SIZE - 1)
-		txdesc->status |= cpu_to_le32(TD_TACT | TD_TDLE);
+		txdesc->status |= cpu_to_edmac(mdp, TD_TACT | TD_TDLE);
 	else
-		txdesc->status |= cpu_to_le32(TD_TACT);
+		txdesc->status |= cpu_to_edmac(mdp, TD_TACT);
 
 	mdp->cur_tx++;
 
-	ctrl_outl(EDTRR_TRNS, ndev->base_addr + EDTRR);
+	if (!(ctrl_inl(ndev->base_addr + EDTRR) & EDTRR_TRNS))
+		ctrl_outl(EDTRR_TRNS, ndev->base_addr + EDTRR);
+
 	ndev->trans_start = jiffies;
 
 	return 0;
@@ -877,9 +1018,15 @@ static struct net_device_stats *sh_eth_get_stats(struct net_device *ndev)
 	ctrl_outl(0, ioaddr + CDCR);	/* (write clear) */
 	mdp->stats.tx_carrier_errors += ctrl_inl(ioaddr + LCCR);
 	ctrl_outl(0, ioaddr + LCCR);	/* (write clear) */
+#if defined(CONFIG_CPU_SUBTYPE_SH7763)
+	mdp->stats.tx_carrier_errors += ctrl_inl(ioaddr + CERCR);/* CERCR */
+	ctrl_outl(0, ioaddr + CERCR);	/* (write clear) */
+	mdp->stats.tx_carrier_errors += ctrl_inl(ioaddr + CEECR);/* CEECR */
+	ctrl_outl(0, ioaddr + CEECR);	/* (write clear) */
+#else
 	mdp->stats.tx_carrier_errors += ctrl_inl(ioaddr + CNDCR);
 	ctrl_outl(0, ioaddr + CNDCR);	/* (write clear) */
-
+#endif
 	return &mdp->stats;
 }
 
@@ -929,8 +1076,13 @@ static void sh_eth_tsu_init(u32 ioaddr)
 	ctrl_outl(0, ioaddr + TSU_FWSL0);
 	ctrl_outl(0, ioaddr + TSU_FWSL1);
 	ctrl_outl(TSU_FWSLC_POSTENU | TSU_FWSLC_POSTENL, ioaddr + TSU_FWSLC);
+#if defined(CONFIG_CPU_SUBTYPE_SH7763)
+	ctrl_outl(0, ioaddr + TSU_QTAG0);	/* Disable QTAG(0->1) */
+	ctrl_outl(0, ioaddr + TSU_QTAG1);	/* Disable QTAG(1->0) */
+#else
 	ctrl_outl(0, ioaddr + TSU_QTAGM0);	/* Disable QTAG(0->1) */
 	ctrl_outl(0, ioaddr + TSU_QTAGM1);	/* Disable QTAG(1->0) */
+#endif
 	ctrl_outl(0, ioaddr + TSU_FWSR);	/* all interrupt status clear */
 	ctrl_outl(0, ioaddr + TSU_FWINMK);	/* Disable all interrupt */
 	ctrl_outl(0, ioaddr + TSU_TEN);	/* Disable all CAM entry */
@@ -1029,6 +1181,7 @@ static int sh_eth_drv_probe(struct platform_device *pdev)
 	struct resource *res;
 	struct net_device *ndev = NULL;
 	struct sh_eth_private *mdp;
+	struct sh_eth_plat_data *pd;
 
 	/* get base addr */
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
@@ -1066,8 +1219,11 @@ static int sh_eth_drv_probe(struct platform_device *pdev)
 	mdp = netdev_priv(ndev);
 	spin_lock_init(&mdp->lock);
 
+	pd = (struct sh_eth_plat_data *)(pdev->dev.platform_data);
 	/* get PHY ID */
-	mdp->phy_id = (int)pdev->dev.platform_data;
+	mdp->phy_id = pd->phy;
+	/* EDMAC endian */
+	mdp->edmac_endian = pd->edmac_endian;
 
 	/* set function */
 	ndev->open = sh_eth_open;
@@ -1087,12 +1243,16 @@ static int sh_eth_drv_probe(struct platform_device *pdev)
 
 	/* First device only init */
 	if (!devno) {
+#if defined(ARSTR)
 		/* reset device */
-		ctrl_outl(ARSTR_ARSTR, ndev->base_addr + ARSTR);
+		ctrl_outl(ARSTR_ARSTR, ARSTR);
 		mdelay(1);
+#endif
 
+#if defined(SH_TSU_ADDR)
 		/* TSU init (Init only)*/
 		sh_eth_tsu_init(SH_TSU_ADDR);
+#endif
 	}
 
 	/* network device register */
@@ -1110,8 +1270,8 @@ static int sh_eth_drv_probe(struct platform_device *pdev)
 	       ndev->name, CARDNAME, (u32) ndev->base_addr);
 
 	for (i = 0; i < 5; i++)
-		printk(KERN_INFO "%2.2x:", ndev->dev_addr[i]);
-	printk(KERN_INFO "%2.2x, IRQ %d.\n", ndev->dev_addr[i], ndev->irq);
+		printk("%02X:", ndev->dev_addr[i]);
+	printk("%02X, IRQ %d.\n", ndev->dev_addr[i], ndev->irq);
 
 	platform_set_drvdata(pdev, ndev);
 
diff --git a/drivers/net/sh_eth.h b/drivers/net/sh_eth.h
index e01e1c347715..73bc7181cc18 100644
--- a/drivers/net/sh_eth.h
+++ b/drivers/net/sh_eth.h
@@ -30,120 +30,254 @@
 #include <linux/netdevice.h>
 #include <linux/phy.h>
 
+#include <asm/sh_eth.h>
+
 #define CARDNAME	"sh-eth"
 #define TX_TIMEOUT	(5*HZ)
-
-#define TX_RING_SIZE	128	/* Tx ring size */
-#define RX_RING_SIZE	128	/* Rx ring size */
-#define RX_OFFSET		2	/* skb offset */
+#define TX_RING_SIZE	64	/* Tx ring size */
+#define RX_RING_SIZE	64	/* Rx ring size */
 #define ETHERSMALL		60
 #define PKT_BUF_SZ		1538
 
+#ifdef CONFIG_CPU_SUBTYPE_SH7763
+
+#define SH7763_SKB_ALIGN 32
 /* Chip Base Address */
-#define SH_TSU_ADDR 0xA7000804
+# define SH_TSU_ADDR  0xFFE01800
+# define ARSTR 		  0xFFE01800
 
 /* Chip Registers */
 /* E-DMAC */
-#define EDMR	0x0000
-#define EDTRR	0x0004
-#define EDRRR	0x0008
-#define TDLAR	0x000C
-#define RDLAR	0x0010
-#define EESR	0x0014
-#define EESIPR	0x0018
-#define TRSCER	0x001C
-#define RMFCR	0x0020
-#define TFTR	0x0024
-#define FDR		0x0028
-#define RMCR	0x002C
-#define EDOCR	0x0030
-#define FCFTR	0x0034
-#define RPADIR	0x0038
-#define TRIMD	0x003C
-#define RBWAR	0x0040
-#define RDFAR	0x0044
-#define TBRAR	0x004C
-#define TDFAR	0x0050
+# define EDSR    0x000
+# define EDMR    0x400
+# define EDTRR   0x408
+# define EDRRR   0x410
+# define EESR    0x428
+# define EESIPR  0x430
+# define TDLAR   0x010
+# define TDFAR   0x014
+# define TDFXR   0x018
+# define TDFFR   0x01C
+# define RDLAR   0x030
+# define RDFAR   0x034
+# define RDFXR   0x038
+# define RDFFR   0x03C
+# define TRSCER  0x438
+# define RMFCR   0x440
+# define TFTR    0x448
+# define FDR     0x450
+# define RMCR    0x458
+# define RPADIR  0x460
+# define FCFTR   0x468
+
+/* Ether Register */
+# define ECMR    0x500
+# define ECSR    0x510
+# define ECSIPR  0x518
+# define PIR     0x520
+# define PSR     0x528
+# define PIPR    0x52C
+# define RFLR    0x508
+# define APR     0x554
+# define MPR     0x558
+# define PFTCR	 0x55C
+# define PFRCR	 0x560
+# define TPAUSER 0x564
+# define GECMR   0x5B0
+# define BCULR   0x5B4
+# define MAHR    0x5C0
+# define MALR    0x5C8
+# define TROCR   0x700
+# define CDCR    0x708
+# define LCCR    0x710
+# define CEFCR   0x740
+# define FRECR   0x748
+# define TSFRCR  0x750
+# define TLFRCR  0x758
+# define RFCR    0x760
+# define CERCR   0x768
+# define CEECR   0x770
+# define MAFCR   0x778
+
+/* TSU Absolute Address */
+# define TSU_CTRST       0x004
+# define TSU_FWEN0       0x010
+# define TSU_FWEN1       0x014
+# define TSU_FCM         0x18
+# define TSU_BSYSL0      0x20
+# define TSU_BSYSL1      0x24
+# define TSU_PRISL0      0x28
+# define TSU_PRISL1      0x2C
+# define TSU_FWSL0       0x30
+# define TSU_FWSL1       0x34
+# define TSU_FWSLC       0x38
+# define TSU_QTAG0       0x40
+# define TSU_QTAG1       0x44
+# define TSU_FWSR        0x50
+# define TSU_FWINMK      0x54
+# define TSU_ADQT0       0x48
+# define TSU_ADQT1       0x4C
+# define TSU_VTAG0       0x58
+# define TSU_VTAG1       0x5C
+# define TSU_ADSBSY      0x60
+# define TSU_TEN         0x64
+# define TSU_POST1       0x70
+# define TSU_POST2       0x74
+# define TSU_POST3       0x78
+# define TSU_POST4       0x7C
+# define TSU_ADRH0       0x100
+# define TSU_ADRL0       0x104
+# define TSU_ADRH31      0x1F8
+# define TSU_ADRL31      0x1FC
+
+# define TXNLCR0         0x80
+# define TXALCR0         0x84
+# define RXNLCR0         0x88
+# define RXALCR0         0x8C
+# define FWNLCR0         0x90
+# define FWALCR0         0x94
+# define TXNLCR1         0xA0
+# define TXALCR1         0xA4
+# define RXNLCR1         0xA8
+# define RXALCR1         0xAC
+# define FWNLCR1         0xB0
+# define FWALCR1         0x40
+
+#else /* CONFIG_CPU_SUBTYPE_SH7763 */
+# define RX_OFFSET 2	/* skb offset */
+#ifndef CONFIG_CPU_SUBTYPE_SH7619
+/* Chip base address */
+# define SH_TSU_ADDR  0xA7000804
+# define ARSTR		  0xA7000800
+#endif
+/* Chip Registers */
+/* E-DMAC */
+# define EDMR	0x0000
+# define EDTRR	0x0004
+# define EDRRR	0x0008
+# define TDLAR	0x000C
+# define RDLAR	0x0010
+# define EESR	0x0014
+# define EESIPR	0x0018
+# define TRSCER	0x001C
+# define RMFCR	0x0020
+# define TFTR	0x0024
+# define FDR	0x0028
+# define RMCR	0x002C
+# define EDOCR	0x0030
+# define FCFTR	0x0034
+# define RPADIR	0x0038
+# define TRIMD	0x003C
+# define RBWAR	0x0040
+# define RDFAR	0x0044
+# define TBRAR	0x004C
+# define TDFAR	0x0050
+
 /* Ether Register */
-#define ECMR	0x0160
-#define ECSR	0x0164
-#define ECSIPR	0x0168
-#define PIR		0x016C
-#define MAHR	0x0170
-#define MALR	0x0174
-#define RFLR	0x0178
-#define PSR		0x017C
-#define TROCR	0x0180
-#define CDCR	0x0184
-#define LCCR	0x0188
-#define CNDCR	0x018C
-#define CEFCR	0x0194
-#define FRECR	0x0198
-#define TSFRCR	0x019C
-#define TLFRCR	0x01A0
-#define RFCR	0x01A4
-#define MAFCR	0x01A8
-#define IPGR	0x01B4
-#if defined(CONFIG_CPU_SUBTYPE_SH7710)
-#define APR		0x01B8
-#define MPR 	0x01BC
-#define TPAUSER 0x1C4
-#define BCFR	0x1CC
-#endif /* CONFIG_CPU_SH7710 */
-
-#define ARSTR	0x0800
+# define ECMR	0x0160
+# define ECSR	0x0164
+# define ECSIPR	0x0168
+# define PIR	0x016C
+# define MAHR	0x0170
+# define MALR	0x0174
+# define RFLR	0x0178
+# define PSR	0x017C
+# define TROCR	0x0180
+# define CDCR	0x0184
+# define LCCR	0x0188
+# define CNDCR	0x018C
+# define CEFCR	0x0194
+# define FRECR	0x0198
+# define TSFRCR	0x019C
+# define TLFRCR	0x01A0
+# define RFCR	0x01A4
+# define MAFCR	0x01A8
+# define IPGR	0x01B4
+# if defined(CONFIG_CPU_SUBTYPE_SH7710)
+# define APR	0x01B8
+# define MPR 	0x01BC
+# define TPAUSER 0x1C4
+# define BCFR	0x1CC
+# endif /* CONFIG_CPU_SH7710 */
 
 /* TSU */
-#define TSU_CTRST	0x004
-#define TSU_FWEN0	0x010
-#define TSU_FWEN1	0x014
-#define TSU_FCM		0x018
-#define TSU_BSYSL0	0x020
-#define TSU_BSYSL1	0x024
-#define TSU_PRISL0	0x028
-#define TSU_PRISL1	0x02C
-#define TSU_FWSL0	0x030
-#define TSU_FWSL1	0x034
-#define TSU_FWSLC	0x038
-#define TSU_QTAGM0	0x040
-#define TSU_QTAGM1	0x044
-#define TSU_ADQT0 	0x048
-#define TSU_ADQT1	0x04C
-#define TSU_FWSR	0x050
-#define TSU_FWINMK	0x054
-#define TSU_ADSBSY	0x060
-#define TSU_TEN		0x064
-#define TSU_POST1	0x070
-#define TSU_POST2	0x074
-#define TSU_POST3	0x078
-#define TSU_POST4	0x07C
-#define TXNLCR0		0x080
-#define TXALCR0		0x084
-#define RXNLCR0		0x088
-#define RXALCR0		0x08C
-#define FWNLCR0		0x090
-#define FWALCR0		0x094
-#define TXNLCR1		0x0A0
-#define TXALCR1		0x0A4
-#define RXNLCR1		0x0A8
-#define RXALCR1		0x0AC
-#define FWNLCR1		0x0B0
-#define FWALCR1		0x0B4
+# define TSU_CTRST	0x004
+# define TSU_FWEN0	0x010
+# define TSU_FWEN1	0x014
+# define TSU_FCM	0x018
+# define TSU_BSYSL0	0x020
+# define TSU_BSYSL1	0x024
+# define TSU_PRISL0	0x028
+# define TSU_PRISL1	0x02C
+# define TSU_FWSL0	0x030
+# define TSU_FWSL1	0x034
+# define TSU_FWSLC	0x038
+# define TSU_QTAGM0	0x040
+# define TSU_QTAGM1	0x044
+# define TSU_ADQT0 	0x048
+# define TSU_ADQT1	0x04C
+# define TSU_FWSR	0x050
+# define TSU_FWINMK	0x054
+# define TSU_ADSBSY	0x060
+# define TSU_TEN	0x064
+# define TSU_POST1	0x070
+# define TSU_POST2	0x074
+# define TSU_POST3	0x078
+# define TSU_POST4	0x07C
+# define TXNLCR0	0x080
+# define TXALCR0	0x084
+# define RXNLCR0	0x088
+# define RXALCR0	0x08C
+# define FWNLCR0	0x090
+# define FWALCR0	0x094
+# define TXNLCR1	0x0A0
+# define TXALCR1	0x0A4
+# define RXNLCR1	0x0A8
+# define RXALCR1	0x0AC
+# define FWNLCR1	0x0B0
+# define FWALCR1	0x0B4
 
 #define TSU_ADRH0	0x0100
 #define TSU_ADRL0	0x0104
 #define TSU_ADRL31	0x01FC
 
-/* Register's bits */
+#endif /* CONFIG_CPU_SUBTYPE_SH7763 */
+
+/*
+ * Register's bits
+ */
+#ifdef CONFIG_CPU_SUBTYPE_SH7763
+/* EDSR */
+enum EDSR_BIT {
+	EDSR_ENT = 0x01, EDSR_ENR = 0x02,
+};
+#define EDSR_ENALL (EDSR_ENT|EDSR_ENR)
+
+/* GECMR */
+enum GECMR_BIT {
+	GECMR_10 = 0x0, GECMR_100 = 0x04, GECMR_1000 = 0x01,
+};
+#endif
 
 /* EDMR */
 enum DMAC_M_BIT {
-	EDMR_DL1 = 0x20, EDMR_DL0 = 0x10, EDMR_SRST = 0x01,
+	EDMR_DL1 = 0x20, EDMR_DL0 = 0x10,
+#ifdef CONFIG_CPU_SUBTYPE_SH7763
+	EDMR_SRST	= 0x03,
+	EMDR_DESC_R	= 0x30, /* Descriptor reserve size */
+	EDMR_EL		= 0x40, /* Litte endian */
+#else /* CONFIG_CPU_SUBTYPE_SH7763 */
+	EDMR_SRST = 0x01,
+#endif
 };
 
 /* EDTRR */
 enum DMAC_T_BIT {
+#ifdef CONFIG_CPU_SUBTYPE_SH7763
+	EDTRR_TRNS = 0x03,
+#else
 	EDTRR_TRNS = 0x01,
+#endif
 };
 
 /* EDRRR*/
@@ -173,21 +307,47 @@ enum PHY_STATUS_BIT { PHY_ST_LINK = 0x01, };
 
 /* EESR */
 enum EESR_BIT {
-	EESR_TWB = 0x40000000, EESR_TABT = 0x04000000,
+#ifndef CONFIG_CPU_SUBTYPE_SH7763
+	EESR_TWB  = 0x40000000,
+#else
+	EESR_TWB  = 0xC0000000,
+	EESR_TC1  = 0x20000000,
+	EESR_TUC  = 0x10000000,
+	EESR_ROC  = 0x80000000,
+#endif
+	EESR_TABT = 0x04000000,
 	EESR_RABT = 0x02000000, EESR_RFRMER = 0x01000000,
-	EESR_ADE = 0x00800000, EESR_ECI = 0x00400000,
-	EESR_FTC = 0x00200000, EESR_TDE = 0x00100000,
-	EESR_TFE = 0x00080000, EESR_FRC = 0x00040000,
-	EESR_RDE = 0x00020000, EESR_RFE = 0x00010000,
-	EESR_TINT4 = 0x00000800, EESR_TINT3 = 0x00000400,
-	EESR_TINT2 = 0x00000200, EESR_TINT1 = 0x00000100,
-	EESR_RINT8 = 0x00000080, EESR_RINT5 = 0x00000010,
-	EESR_RINT4 = 0x00000008, EESR_RINT3 = 0x00000004,
-	EESR_RINT2 = 0x00000002, EESR_RINT1 = 0x00000001,
-};
-
-#define EESR_ERR_CHECK	(EESR_TWB | EESR_TABT | EESR_RABT | EESR_RDE \
+#ifndef CONFIG_CPU_SUBTYPE_SH7763
+	EESR_ADE  = 0x00800000,
+#endif
+	EESR_ECI  = 0x00400000,
+	EESR_FTC  = 0x00200000, EESR_TDE  = 0x00100000,
+	EESR_TFE  = 0x00080000, EESR_FRC  = 0x00040000,
+	EESR_RDE  = 0x00020000, EESR_RFE  = 0x00010000,
+#ifndef CONFIG_CPU_SUBTYPE_SH7763
+	EESR_CND  = 0x00000800,
+#endif
+	EESR_DLC  = 0x00000400,
+	EESR_CD   = 0x00000200, EESR_RTO  = 0x00000100,
+	EESR_RMAF = 0x00000080, EESR_CEEF = 0x00000040,
+	EESR_CELF = 0x00000020, EESR_RRF  = 0x00000010,
+	EESR_RTLF = 0x00000008, EESR_RTSF = 0x00000004,
+	EESR_PRE  = 0x00000002, EESR_CERF = 0x00000001,
+};
+
+
+#ifdef CONFIG_CPU_SUBTYPE_SH7763
+# define TX_CHECK (EESR_TC1 | EESR_FTC)
+# define EESR_ERR_CHECK	(EESR_TWB | EESR_TABT | EESR_RABT | EESR_RDE \
+		| EESR_RFRMER | EESR_TFE | EESR_TDE | EESR_ECI)
+# define TX_ERROR_CEHCK (EESR_TWB | EESR_TABT | EESR_TDE | EESR_TFE)
+
+#else
+# define TX_CHECK (EESR_FTC | EESR_CND | EESR_DLC | EESR_CD | EESR_RTO)
+# define EESR_ERR_CHECK	(EESR_TWB | EESR_TABT | EESR_RABT | EESR_RDE \
 		| EESR_RFRMER | EESR_ADE | EESR_TFE | EESR_TDE | EESR_ECI)
+# define TX_ERROR_CEHCK (EESR_TWB | EESR_TABT | EESR_ADE | EESR_TDE | EESR_TFE)
+#endif
 
 /* EESIPR */
 enum DMAC_IM_BIT {
@@ -207,8 +367,8 @@ enum DMAC_IM_BIT {
 
 /* Receive descriptor bit */
 enum RD_STS_BIT {
-	RD_RACT = 0x80000000, RC_RDEL = 0x40000000,
-	RC_RFP1 = 0x20000000, RC_RFP0 = 0x10000000,
+	RD_RACT = 0x80000000, RD_RDEL = 0x40000000,
+	RD_RFP1 = 0x20000000, RD_RFP0 = 0x10000000,
 	RD_RFE = 0x08000000, RD_RFS10 = 0x00000200,
 	RD_RFS9 = 0x00000100, RD_RFS8 = 0x00000080,
 	RD_RFS7 = 0x00000040, RD_RFS6 = 0x00000020,
@@ -216,9 +376,9 @@ enum RD_STS_BIT {
 	RD_RFS3 = 0x00000004, RD_RFS2 = 0x00000002,
 	RD_RFS1 = 0x00000001,
 };
-#define RDF1ST	RC_RFP1
-#define RDFEND	RC_RFP0
-#define RD_RFP	(RC_RFP1|RC_RFP0)
+#define RDF1ST	RD_RFP1
+#define RDFEND	RD_RFP0
+#define RD_RFP	(RD_RFP1|RD_RFP0)
 
 /* FCFTR */
 enum FCFTR_BIT {
@@ -227,11 +387,16 @@ enum FCFTR_BIT {
 	FCFTR_RFD1 = 0x00000002, FCFTR_RFD0 = 0x00000001,
 };
 #define FIFO_F_D_RFF	(FCFTR_RFF2|FCFTR_RFF1|FCFTR_RFF0)
+#ifndef CONFIG_CPU_SUBTYPE_SH7619
 #define FIFO_F_D_RFD	(FCFTR_RFD2|FCFTR_RFD1|FCFTR_RFD0)
+#else
+#define FIFO_F_D_RFD	(FCFTR_RFD0)
+#endif
 
 /* Transfer descriptor bit */
 enum TD_STS_BIT {
-	TD_TACT = 0x80000000, TD_TDLE = 0x40000000, TD_TFP1 = 0x20000000,
+	TD_TACT = 0x80000000,
+	TD_TDLE = 0x40000000, TD_TFP1 = 0x20000000,
 	TD_TFP0 = 0x10000000,
 };
 #define TDF1ST	TD_TFP1
@@ -242,6 +407,10 @@ enum TD_STS_BIT {
 enum RECV_RST_BIT { RMCR_RST = 0x01, };
 /* ECMR */
 enum FELIC_MODE_BIT {
+#ifdef CONFIG_CPU_SUBTYPE_SH7763
+	ECMR_TRCCM = 0x04000000, ECMR_RCSC = 0x00800000,
+	ECMR_DPAD = 0x00200000, ECMR_RZPF = 0x00100000,
+#endif
 	ECMR_ZPF = 0x00080000, ECMR_PFR = 0x00040000, ECMR_RXF = 0x00020000,
 	ECMR_TXF = 0x00010000, ECMR_MCT = 0x00002000, ECMR_PRCEF = 0x00001000,
 	ECMR_PMDE = 0x00000200, ECMR_RE = 0x00000040, ECMR_TE = 0x00000020,
@@ -249,18 +418,47 @@ enum FELIC_MODE_BIT {
 	ECMR_PRM = 0x00000001,
 };
 
+#ifdef CONFIG_CPU_SUBTYPE_SH7763
+#define ECMR_CHG_DM	(ECMR_TRCCM | ECMR_RZPF | ECMR_ZPF |\
+			ECMR_PFR | ECMR_RXF | ECMR_TXF | ECMR_MCT)
+#elif CONFIG_CPU_SUBTYPE_SH7619
+#define ECMR_CHG_DM	(ECMR_ZPF | ECMR_PFR | ECMR_RXF | ECMR_TXF)
+#else
+#define ECMR_CHG_DM	(ECMR_ZPF | ECMR_PFR | ECMR_RXF | ECMR_TXF | ECMR_MCT)
+#endif
+
 /* ECSR */
 enum ECSR_STATUS_BIT {
-	ECSR_BRCRX = 0x20, ECSR_PSRTO = 0x10, ECSR_LCHNG = 0x04,
+#ifndef CONFIG_CPU_SUBTYPE_SH7763
+	ECSR_BRCRX = 0x20, ECSR_PSRTO = 0x10,
+#endif
+	ECSR_LCHNG = 0x04,
 	ECSR_MPD = 0x02, ECSR_ICD = 0x01,
 };
 
+#ifdef CONFIG_CPU_SUBTYPE_SH7763
+# define ECSR_INIT (ECSR_ICD | ECSIPR_MPDIP)
+#else
+# define ECSR_INIT (ECSR_BRCRX | ECSR_PSRTO | \
+			ECSR_LCHNG | ECSR_ICD | ECSIPR_MPDIP)
+#endif
+
 /* ECSIPR */
 enum ECSIPR_STATUS_MASK_BIT {
-	ECSIPR_BRCRXIP = 0x20, ECSIPR_PSRTOIP = 0x10, ECSIPR_LCHNGIP = 0x04,
+#ifndef CONFIG_CPU_SUBTYPE_SH7763
+	ECSIPR_BRCRXIP = 0x20, ECSIPR_PSRTOIP = 0x10,
+#endif
+	ECSIPR_LCHNGIP = 0x04,
 	ECSIPR_MPDIP = 0x02, ECSIPR_ICDIP = 0x01,
 };
 
+#ifdef CONFIG_CPU_SUBTYPE_SH7763
+# define ECSIPR_INIT (ECSIPR_LCHNGIP | ECSIPR_ICDIP | ECSIPR_MPDIP)
+#else
+# define ECSIPR_INIT (ECSIPR_BRCRXIP | ECSIPR_PSRTOIP | ECSIPR_LCHNGIP | \
+				ECSIPR_ICDIP | ECSIPR_MPDIP)
+#endif
+
 /* APR */
 enum APR_BIT {
 	APR_AP = 0x00000001,
@@ -285,9 +483,22 @@ enum RPADIR_BIT {
 	RPADIR_PADR = 0x0003f,
 };
 
+#if defined(CONFIG_CPU_SUBTYPE_SH7763)
+# define RPADIR_INIT (0x00)
+#else
+# define RPADIR_INIT (RPADIR_PADS1)
+#endif
+
+/* RFLR */
+#define RFLR_VALUE 0x1000
+
 /* FDR */
 enum FIFO_SIZE_BIT {
+#ifndef CONFIG_CPU_SUBTYPE_SH7619
 	FIFO_SIZE_T = 0x00000700, FIFO_SIZE_R = 0x00000007,
+#else
+	FIFO_SIZE_T = 0x00000100, FIFO_SIZE_R = 0x00000001,
+#endif
 };
 enum phy_offsets {
 	PHY_CTRL = 0, PHY_STAT = 1, PHY_IDT1 = 2, PHY_IDT2 = 3,
@@ -316,7 +527,7 @@ enum PHY_ANA_BIT {
 	PHY_A_NP = 0x8000, PHY_A_ACK = 0x4000, PHY_A_RF = 0x2000,
 	PHY_A_FCS = 0x0400, PHY_A_T4 = 0x0200, PHY_A_FDX = 0x0100,
 	PHY_A_HDX = 0x0080, PHY_A_10FDX = 0x0040, PHY_A_10HDX = 0x0020,
-	PHY_A_SEL = 0x001f,
+	PHY_A_SEL = 0x001e,
 };
 /* PHY_ANL */
 enum PHY_ANL_BIT {
@@ -403,7 +614,7 @@ struct sh_eth_txdesc {
 #endif
 	u32 addr;		/* TD2 */
 	u32 pad1;		/* padding data */
-};
+} __attribute__((aligned(2), packed));
 
 /*
  * The sh ether Rx buffer descriptors.
@@ -420,7 +631,7 @@ struct sh_eth_rxdesc {
 #endif
 	u32 addr;		/* RD2 */
 	u32 pad0;		/* padding data */
-};
+} __attribute__((aligned(2), packed));
 
 struct sh_eth_private {
 	dma_addr_t rx_desc_dma;
@@ -435,6 +646,7 @@ struct sh_eth_private {
 	u32 cur_rx, dirty_rx;	/* Producer/consumer ring indices */
 	u32 cur_tx, dirty_tx;
 	u32 rx_buf_sz;		/* Based on MTU+slack. */
+	int edmac_endian;
 	/* MII transceiver section. */
 	u32 phy_id;					/* PHY ID */
 	struct mii_bus *mii_bus;	/* MDIO bus control */
@@ -449,6 +661,10 @@ struct sh_eth_private {
 	struct net_device_stats tsu_stats;	/* TSU forward status */
 };
 
+#ifdef CONFIG_CPU_SUBTYPE_SH7763
+/* SH7763 has endian control register */
+#define swaps(x, y)
+#else
 static void swaps(char *src, int len)
 {
 #ifdef __LITTLE_ENDIAN__
@@ -460,5 +676,5 @@ static void swaps(char *src, int len)
 		*p = swab32(*p);
 #endif
 }
-
+#endif /* CONFIG_CPU_SUBTYPE_SH7763 */
 #endif
diff --git a/drivers/net/skfp/ess.c b/drivers/net/skfp/ess.c
index 889f98724610..a85efcfd9d0e 100644
--- a/drivers/net/skfp/ess.c
+++ b/drivers/net/skfp/ess.c
@@ -510,7 +510,7 @@ static void ess_send_response(struct s_smc *smc, struct smt_header *sm,
 	chg->path.para.p_type = SMT_P320B ;
 	chg->path.para.p_len = sizeof(struct smt_p_320b) - PARA_LEN ;
 	chg->path.mib_index = SBAPATHINDEX ;
-	chg->path.path_pad = (u_short)NULL ;
+	chg->path.path_pad = 0;
 	chg->path.path_index = PRIMARY_RING ;
 
 	/* set P320F */
@@ -606,7 +606,7 @@ static void ess_send_alc_req(struct s_smc *smc)
 	req->path.para.p_type = SMT_P320B ;
 	req->path.para.p_len = sizeof(struct smt_p_320b) - PARA_LEN ;
 	req->path.mib_index = SBAPATHINDEX ;
-	req->path.path_pad = (u_short)NULL ;
+	req->path.path_pad = 0;
 	req->path.path_index = PRIMARY_RING ;
 
 	/* set P0017 */
@@ -636,7 +636,7 @@ static void ess_send_alc_req(struct s_smc *smc)
 	/* set P19 */
 	req->a_addr.para.p_type = SMT_P0019 ;
 	req->a_addr.para.p_len = sizeof(struct smt_p_0019) - PARA_LEN ;
-	req->a_addr.sba_pad = (u_short)NULL ;
+	req->a_addr.sba_pad = 0;
 	req->a_addr.alloc_addr = null_addr ;
 
 	/* set P1A */
diff --git a/drivers/net/skfp/smt.c b/drivers/net/skfp/smt.c
index ffbfb1b79f97..805383b33d3c 100644
--- a/drivers/net/skfp/smt.c
+++ b/drivers/net/skfp/smt.c
@@ -19,6 +19,7 @@
 #include "h/smc.h"
 #include "h/smt_p.h"
 #include <linux/bitrev.h>
+#include <linux/kernel.h>
 
 #define KERNEL
 #include "h/smtstate.h"
@@ -1730,20 +1731,18 @@ void fddi_send_antc(struct s_smc *smc, struct fddi_addr *dest)
 #endif
 
 #ifdef	DEBUG
-#define hextoasc(x)	"0123456789abcdef"[x]
-
 char *addr_to_string(struct fddi_addr *addr)
 {
 	int	i ;
 	static char	string[6*3] = "****" ;
 
 	for (i = 0 ; i < 6 ; i++) {
-		string[i*3] = hextoasc((addr->a[i]>>4)&0xf) ;
-		string[i*3+1] = hextoasc((addr->a[i])&0xf) ;
-		string[i*3+2] = ':' ;
+		string[i * 3] = hex_asc_hi(addr->a[i]);
+		string[i * 3 + 1] = hex_asc_lo(addr->a[i]);
+		string[i * 3 + 2] = ':';
 	}
-	string[5*3+2] = 0 ;
-	return(string) ;
+	string[5 * 3 + 2] = 0;
+	return(string);
 }
 #endif
 
diff --git a/drivers/net/sky2.c b/drivers/net/sky2.c
index 5257cf464f1a..e24b25ca1c69 100644
--- a/drivers/net/sky2.c
+++ b/drivers/net/sky2.c
@@ -24,7 +24,6 @@
 
 #include <linux/crc32.h>
 #include <linux/kernel.h>
-#include <linux/version.h>
 #include <linux/module.h>
 #include <linux/netdevice.h>
 #include <linux/dma-mapping.h>
@@ -275,86 +274,6 @@ static void sky2_power_aux(struct sky2_hw *hw)
 			     PC_VAUX_ON | PC_VCC_OFF));
 }
 
-static void sky2_power_state(struct sky2_hw *hw, pci_power_t state)
-{
-	u16 power_control = sky2_pci_read16(hw, hw->pm_cap + PCI_PM_CTRL);
-	int pex = pci_find_capability(hw->pdev, PCI_CAP_ID_EXP);
-	u32 reg;
-
-	sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_ON);
-
-	switch (state) {
-	case PCI_D0:
-		break;
-
-	case PCI_D1:
-		power_control |= 1;
-		break;
-
-	case PCI_D2:
-		power_control |= 2;
-		break;
-
-	case PCI_D3hot:
-	case PCI_D3cold:
-		power_control |= 3;
-		if (hw->flags & SKY2_HW_ADV_POWER_CTL) {
-			/* additional power saving measurements */
-			reg = sky2_pci_read32(hw, PCI_DEV_REG4);
-
-			/* set gating core clock for LTSSM in L1 state */
-			reg |= P_PEX_LTSSM_STAT(P_PEX_LTSSM_L1_STAT) |
-				/* auto clock gated scheme controlled by CLKREQ */
-				P_ASPM_A1_MODE_SELECT |
-				/* enable Gate Root Core Clock */
-				P_CLK_GATE_ROOT_COR_ENA;
-
-			if (pex && (hw->flags & SKY2_HW_CLK_POWER)) {
-				/* enable Clock Power Management (CLKREQ) */
-				u16 ctrl = sky2_pci_read16(hw, pex + PCI_EXP_DEVCTL);
-
-				ctrl |= PCI_EXP_DEVCTL_AUX_PME;
-				sky2_pci_write16(hw, pex + PCI_EXP_DEVCTL, ctrl);
-			} else
-				/* force CLKREQ Enable in Our4 (A1b only) */
-				reg |= P_ASPM_FORCE_CLKREQ_ENA;
-
-			/* set Mask Register for Release/Gate Clock */
-			sky2_pci_write32(hw, PCI_DEV_REG5,
-					 P_REL_PCIE_EXIT_L1_ST | P_GAT_PCIE_ENTER_L1_ST |
-					 P_REL_PCIE_RX_EX_IDLE | P_GAT_PCIE_RX_EL_IDLE |
-					 P_REL_GPHY_LINK_UP | P_GAT_GPHY_LINK_DOWN);
-		} else
-			sky2_write8(hw, B28_Y2_ASF_STAT_CMD, Y2_ASF_CLK_HALT);
-
-		/* put CPU into reset state */
-		sky2_write8(hw,  B28_Y2_ASF_STAT_CMD, HCU_CCSR_ASF_RESET);
-		if (hw->chip_id == CHIP_ID_YUKON_SUPR && hw->chip_rev == CHIP_REV_YU_SU_A0)
-			/* put CPU into halt state */
-			sky2_write8(hw, B28_Y2_ASF_STAT_CMD, HCU_CCSR_ASF_HALTED);
-
-		if (pex && !(hw->flags & SKY2_HW_RAM_BUFFER)) {
-			reg = sky2_pci_read32(hw, PCI_DEV_REG1);
-			/* force to PCIe L1 */
-			reg |= PCI_FORCE_PEX_L1;
-			sky2_pci_write32(hw, PCI_DEV_REG1, reg);
-		}
-		break;
-
-	default:
-		dev_warn(&hw->pdev->dev, PFX "Invalid power state (%d) ",
-		       state);
-		return;
-	}
-
-	power_control |= PCI_PM_CTRL_PME_ENABLE;
-	/* Finally, set the new power state. */
-	sky2_pci_write32(hw, hw->pm_cap + PCI_PM_CTRL, power_control);
-
-	sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_OFF);
-	sky2_pci_read32(hw, B0_CTST);
-}
-
 static void sky2_gmac_reset(struct sky2_hw *hw, unsigned port)
 {
 	u16 reg;
@@ -709,6 +628,11 @@ static void sky2_phy_power_up(struct sky2_hw *hw, unsigned port)
 	sky2_pci_write32(hw, PCI_DEV_REG1, reg1);
 	sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_OFF);
 	sky2_pci_read32(hw, PCI_DEV_REG1);
+
+	if (hw->chip_id == CHIP_ID_YUKON_FE)
+		gm_phy_write(hw, port, PHY_MARV_CTRL, PHY_CT_ANE);
+	else if (hw->flags & SKY2_HW_ADV_POWER_CTL)
+		sky2_write8(hw, SK_REG(port, GPHY_CTRL), GPC_RST_CLR);
 }
 
 static void sky2_phy_power_down(struct sky2_hw *hw, unsigned port)
@@ -741,11 +665,16 @@ static void sky2_phy_power_down(struct sky2_hw *hw, unsigned port)
 
 	if (hw->chip_id != CHIP_ID_YUKON_EC) {
 		if (hw->chip_id == CHIP_ID_YUKON_EC_U) {
-			ctrl = gm_phy_read(hw, port, PHY_MARV_PHY_CTRL);
+			/* select page 2 to access MAC control register */
+			gm_phy_write(hw, port, PHY_MARV_EXT_ADR, 2);
 
+			ctrl = gm_phy_read(hw, port, PHY_MARV_PHY_CTRL);
 			/* enable Power Down */
 			ctrl |= PHY_M_PC_POW_D_ENA;
 			gm_phy_write(hw, port, PHY_MARV_PHY_CTRL, ctrl);
+
+			/* set page register back to 0 */
+			gm_phy_write(hw, port, PHY_MARV_EXT_ADR, 0);
 		}
 
 		/* set IEEE compatible Power Down Mode (dev. #4.99) */
@@ -2855,10 +2784,6 @@ static int __devinit sky2_init(struct sky2_hw *hw)
 		hw->flags = SKY2_HW_GIGABIT
 			| SKY2_HW_NEWER_PHY
 			| SKY2_HW_ADV_POWER_CTL;
-
-		/* check for Rev. A1 dev 4200 */
-		if (sky2_read16(hw, Q_ADDR(Q_XA1, Q_WM)) == 0)
-			hw->flags |= SKY2_HW_CLK_POWER;
 		break;
 
 	case CHIP_ID_YUKON_EX:
@@ -2914,12 +2839,6 @@ static int __devinit sky2_init(struct sky2_hw *hw)
 	if (hw->pmd_type == 'L' || hw->pmd_type == 'S' || hw->pmd_type == 'P')
 		hw->flags |= SKY2_HW_FIBRE_PHY;
 
-	hw->pm_cap = pci_find_capability(hw->pdev, PCI_CAP_ID_PM);
-	if (hw->pm_cap == 0) {
-		dev_err(&hw->pdev->dev, "cannot find PowerManagement capability\n");
-		return -EIO;
-	}
-
 	hw->ports = 1;
 	t8 = sky2_read8(hw, B2_Y2_HW_RES);
 	if ((t8 & CFG_DUAL_MAC_MSK) == CFG_DUAL_MAC_MSK) {
@@ -4512,7 +4431,7 @@ static int sky2_suspend(struct pci_dev *pdev, pm_message_t state)
 
 	pci_save_state(pdev);
 	pci_enable_wake(pdev, pci_choose_state(pdev, state), wol);
-	sky2_power_state(hw, pci_choose_state(pdev, state));
+	pci_set_power_state(pdev, pci_choose_state(pdev, state));
 
 	return 0;
 }
@@ -4525,7 +4444,9 @@ static int sky2_resume(struct pci_dev *pdev)
 	if (!hw)
 		return 0;
 
-	sky2_power_state(hw, PCI_D0);
+	err = pci_set_power_state(pdev, PCI_D0);
+	if (err)
+		goto out;
 
 	err = pci_restore_state(pdev);
 	if (err)
@@ -4595,7 +4516,7 @@ static void sky2_shutdown(struct pci_dev *pdev)
 	pci_enable_wake(pdev, PCI_D3cold, wol);
 
 	pci_disable_device(pdev);
-	sky2_power_state(hw, PCI_D3hot);
+	pci_set_power_state(pdev, PCI_D3hot);
 }
 
 static struct pci_driver sky2_driver = {
diff --git a/drivers/net/sky2.h b/drivers/net/sky2.h
index 4d9c4a19bb85..92fb24b27d45 100644
--- a/drivers/net/sky2.h
+++ b/drivers/net/sky2.h
@@ -2072,9 +2072,7 @@ struct sky2_hw {
 #define SKY2_HW_NEW_LE		0x00000020	/* new LSOv2 format */
 #define SKY2_HW_AUTO_TX_SUM	0x00000040	/* new IP decode for Tx */
 #define SKY2_HW_ADV_POWER_CTL	0x00000080	/* additional PHY power regs */
-#define SKY2_HW_CLK_POWER	0x00000100	/* clock power management */
 
-	int		     pm_cap;
 	u8	     	     chip_id;
 	u8		     chip_rev;
 	u8		     pmd_type;
diff --git a/drivers/net/smc911x.h b/drivers/net/smc911x.h
index 76c17c28fab4..2abfc2845198 100644
--- a/drivers/net/smc911x.h
+++ b/drivers/net/smc911x.h
@@ -222,7 +222,7 @@ static inline void SMC_outsl(struct smc911x_local *lp, int reg,
  */
 #include <linux/dma-mapping.h>
 #include <asm/dma.h>
-#include <asm/arch/pxa-regs.h>
+#include <mach/pxa-regs.h>
 
 static dma_addr_t rx_dmabuf, tx_dmabuf;
 static int rx_dmalen, tx_dmalen;
diff --git a/drivers/net/smc91x.c b/drivers/net/smc91x.c
index 2040965d7724..24768c10cadb 100644
--- a/drivers/net/smc91x.c
+++ b/drivers/net/smc91x.c
@@ -2255,7 +2255,7 @@ static int smc_drv_remove(struct platform_device *pdev)
 
 	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "smc91x-regs");
 	if (!res)
-		platform_get_resource(pdev, IORESOURCE_MEM, 0);
+		res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	release_mem_region(res->start, SMC_IO_EXTENT);
 
 	free_netdev(ndev);
diff --git a/drivers/net/smc91x.h b/drivers/net/smc91x.h
index 22209b6f1405..997e7f1d5c6e 100644
--- a/drivers/net/smc91x.h
+++ b/drivers/net/smc91x.h
@@ -187,7 +187,7 @@ static inline void SMC_outw(u16 val, void __iomem *ioaddr, int reg)
 
 #elif defined(CONFIG_SA1100_ASSABET)
 
-#include <asm/arch/neponset.h>
+#include <mach/neponset.h>
 
 /* We can only do 8-bit reads and writes in the static memory space. */
 #define SMC_CAN_USE_8BIT	1
@@ -339,7 +339,7 @@ SMC_outw(u16 val, void __iomem *ioaddr, int reg)
  * IOBARRIER on entry to their ISR.
  */
 
-#include <asm/arch/constants.h>	/* IOBARRIER_VIRT */
+#include <mach/constants.h>	/* IOBARRIER_VIRT */
 
 #define SMC_CAN_USE_8BIT	0
 #define SMC_CAN_USE_16BIT	1
@@ -525,7 +525,7 @@ struct smc_local {
  */
 #include <linux/dma-mapping.h>
 #include <asm/dma.h>
-#include <asm/arch/pxa-regs.h>
+#include <mach/pxa-regs.h>
 
 #ifdef SMC_insl
 #undef SMC_insl
diff --git a/drivers/net/spider_net.c b/drivers/net/spider_net.c
index 00aa0b108cb9..b6435d0d71f9 100644
--- a/drivers/net/spider_net.c
+++ b/drivers/net/spider_net.c
@@ -452,7 +452,7 @@ spider_net_prepare_rx_descr(struct spider_net_card *card,
 	/* iommu-map the skb */
 	buf = pci_map_single(card->pdev, descr->skb->data,
 			SPIDER_NET_MAX_FRAME, PCI_DMA_FROMDEVICE);
-	if (pci_dma_mapping_error(buf)) {
+	if (pci_dma_mapping_error(card->pdev, buf)) {
 		dev_kfree_skb_any(descr->skb);
 		descr->skb = NULL;
 		if (netif_msg_rx_err(card) && net_ratelimit())
@@ -691,7 +691,7 @@ spider_net_prepare_tx_descr(struct spider_net_card *card,
 	unsigned long flags;
 
 	buf = pci_map_single(card->pdev, skb->data, skb->len, PCI_DMA_TODEVICE);
-	if (pci_dma_mapping_error(buf)) {
+	if (pci_dma_mapping_error(card->pdev, buf)) {
 		if (netif_msg_tx_err(card) && net_ratelimit())
 			dev_err(&card->netdev->dev, "could not iommu-map packet (%p, %i). "
 				  "Dropping packet\n", skb->data, skb->len);
diff --git a/drivers/net/stnic.c b/drivers/net/stnic.c
index b65be5d70fec..2ed0bd596815 100644
--- a/drivers/net/stnic.c
+++ b/drivers/net/stnic.c
@@ -19,7 +19,7 @@
 
 #include <asm/system.h>
 #include <asm/io.h>
-#include <asm/se.h>
+#include <mach-se/mach/se.h>
 #include <asm/machvec.h>
 #ifdef CONFIG_SH_STANDARD_BIOS
 #include <asm/sh_bios.h>
diff --git a/drivers/net/sun3_82586.c b/drivers/net/sun3_82586.c
index 9b2a7f7bb258..e531302d95f5 100644
--- a/drivers/net/sun3_82586.c
+++ b/drivers/net/sun3_82586.c
@@ -425,14 +425,11 @@ static int init586(struct net_device *dev)
 		int len = ((char *) p->iscp - (char *) ptr - 8) / 6;
 		if(num_addrs > len)	{
 			printk("%s: switching to promisc. mode\n",dev->name);
-			dev->flags|=IFF_PROMISC;
+			cfg_cmd->promisc = 1;
 		}
 	}
 	if(dev->flags&IFF_PROMISC)
-	{
-			 cfg_cmd->promisc=1;
-			 dev->flags|=IFF_PROMISC;
-	}
+		cfg_cmd->promisc = 1;
 	cfg_cmd->carr_coll	= 0x00;
 
 	p->scb->cbl_offset	= make16(cfg_cmd);
diff --git a/drivers/net/tc35815.c b/drivers/net/tc35815.c
index a645e5028c14..8487ace9d2e3 100644
--- a/drivers/net/tc35815.c
+++ b/drivers/net/tc35815.c
@@ -506,7 +506,7 @@ static void *alloc_rxbuf_page(struct pci_dev *hwdev, dma_addr_t *dma_handle)
 		return NULL;
 	*dma_handle = pci_map_single(hwdev, buf, PAGE_SIZE,
 				     PCI_DMA_FROMDEVICE);
-	if (pci_dma_mapping_error(*dma_handle)) {
+	if (pci_dma_mapping_error(hwdev, *dma_handle)) {
 		free_page((unsigned long)buf);
 		return NULL;
 	}
@@ -536,7 +536,7 @@ static struct sk_buff *alloc_rxbuf_skb(struct net_device *dev,
 		return NULL;
 	*dma_handle = pci_map_single(hwdev, skb->data, RX_BUF_SIZE,
 				     PCI_DMA_FROMDEVICE);
-	if (pci_dma_mapping_error(*dma_handle)) {
+	if (pci_dma_mapping_error(hwdev, *dma_handle)) {
 		dev_kfree_skb_any(skb);
 		return NULL;
 	}
diff --git a/drivers/net/tehuti.h b/drivers/net/tehuti.h
index c66dfc9ec1ec..7db48f1cd949 100644
--- a/drivers/net/tehuti.h
+++ b/drivers/net/tehuti.h
@@ -27,7 +27,6 @@
 #include <linux/sched.h>
 #include <linux/tty.h>
 #include <linux/if_vlan.h>
-#include <linux/version.h>
 #include <linux/interrupt.h>
 #include <linux/vmalloc.h>
 #include <asm/byteorder.h>
diff --git a/drivers/net/tg3.c b/drivers/net/tg3.c
index 633c128a6228..71d2c5cfdad9 100644
--- a/drivers/net/tg3.c
+++ b/drivers/net/tg3.c
@@ -66,8 +66,8 @@
 
 #define DRV_MODULE_NAME		"tg3"
 #define PFX DRV_MODULE_NAME	": "
-#define DRV_MODULE_VERSION	"3.93"
-#define DRV_MODULE_RELDATE	"May 22, 2008"
+#define DRV_MODULE_VERSION	"3.94"
+#define DRV_MODULE_RELDATE	"August 14, 2008"
 
 #define TG3_DEF_MAC_MODE	0
 #define TG3_DEF_RX_MODE		0
@@ -536,6 +536,7 @@ static int tg3_ape_lock(struct tg3 *tp, int locknum)
 		return 0;
 
 	switch (locknum) {
+		case TG3_APE_LOCK_GRC:
 		case TG3_APE_LOCK_MEM:
 			break;
 		default:
@@ -573,6 +574,7 @@ static void tg3_ape_unlock(struct tg3 *tp, int locknum)
 		return;
 
 	switch (locknum) {
+		case TG3_APE_LOCK_GRC:
 		case TG3_APE_LOCK_MEM:
 			break;
 		default:
@@ -1018,15 +1020,43 @@ static void tg3_mdio_fini(struct tg3 *tp)
 }
 
 /* tp->lock is held. */
+static inline void tg3_generate_fw_event(struct tg3 *tp)
+{
+	u32 val;
+
+	val = tr32(GRC_RX_CPU_EVENT);
+	val |= GRC_RX_CPU_DRIVER_EVENT;
+	tw32_f(GRC_RX_CPU_EVENT, val);
+
+	tp->last_event_jiffies = jiffies;
+}
+
+#define TG3_FW_EVENT_TIMEOUT_USEC 2500
+
+/* tp->lock is held. */
 static void tg3_wait_for_event_ack(struct tg3 *tp)
 {
 	int i;
+	unsigned int delay_cnt;
+	long time_remain;
+
+	/* If enough time has passed, no wait is necessary. */
+	time_remain = (long)(tp->last_event_jiffies + 1 +
+		      usecs_to_jiffies(TG3_FW_EVENT_TIMEOUT_USEC)) -
+		      (long)jiffies;
+	if (time_remain < 0)
+		return;
+
+	/* Check if we can shorten the wait time. */
+	delay_cnt = jiffies_to_usecs(time_remain);
+	if (delay_cnt > TG3_FW_EVENT_TIMEOUT_USEC)
+		delay_cnt = TG3_FW_EVENT_TIMEOUT_USEC;
+	delay_cnt = (delay_cnt >> 3) + 1;
 
-	/* Wait for up to 2.5 milliseconds */
-	for (i = 0; i < 250000; i++) {
+	for (i = 0; i < delay_cnt; i++) {
 		if (!(tr32(GRC_RX_CPU_EVENT) & GRC_RX_CPU_DRIVER_EVENT))
 			break;
-		udelay(10);
+		udelay(8);
 	}
 }
 
@@ -1075,9 +1105,7 @@ static void tg3_ump_link_report(struct tg3 *tp)
 		val = 0;
 	tg3_write_mem(tp, NIC_SRAM_FW_CMD_DATA_MBOX + 12, val);
 
-	val = tr32(GRC_RX_CPU_EVENT);
-	val |= GRC_RX_CPU_DRIVER_EVENT;
-	tw32_f(GRC_RX_CPU_EVENT, val);
+	tg3_generate_fw_event(tp);
 }
 
 static void tg3_link_report(struct tg3 *tp)
@@ -1982,8 +2010,6 @@ static void tg3_power_down_phy(struct tg3 *tp)
 static int tg3_set_power_state(struct tg3 *tp, pci_power_t state)
 {
 	u32 misc_host_ctrl;
-	u16 power_control, power_caps;
-	int pm = tp->pm_cap;
 
 	/* Make sure register accesses (indirect or otherwise)
 	 * will function correctly.
@@ -1992,18 +2018,10 @@ static int tg3_set_power_state(struct tg3 *tp, pci_power_t state)
 			       TG3PCI_MISC_HOST_CTRL,
 			       tp->misc_host_ctrl);
 
-	pci_read_config_word(tp->pdev,
-			     pm + PCI_PM_CTRL,
-			     &power_control);
-	power_control |= PCI_PM_CTRL_PME_STATUS;
-	power_control &= ~(PCI_PM_CTRL_STATE_MASK);
 	switch (state) {
 	case PCI_D0:
-		power_control |= 0;
-		pci_write_config_word(tp->pdev,
-				      pm + PCI_PM_CTRL,
-				      power_control);
-		udelay(100);	/* Delay after power state change */
+		pci_enable_wake(tp->pdev, state, false);
+		pci_set_power_state(tp->pdev, PCI_D0);
 
 		/* Switch out of Vaux if it is a NIC */
 		if (tp->tg3_flags2 & TG3_FLG2_IS_NIC)
@@ -2012,26 +2030,15 @@ static int tg3_set_power_state(struct tg3 *tp, pci_power_t state)
 		return 0;
 
 	case PCI_D1:
-		power_control |= 1;
-		break;
-
 	case PCI_D2:
-		power_control |= 2;
-		break;
-
 	case PCI_D3hot:
-		power_control |= 3;
 		break;
 
 	default:
-		printk(KERN_WARNING PFX "%s: Invalid power state (%d) "
-		       "requested.\n",
-		       tp->dev->name, state);
+		printk(KERN_ERR PFX "%s: Invalid power state (D%d) requested\n",
+			tp->dev->name, state);
 		return -EINVAL;
 	}
-
-	power_control |= PCI_PM_CTRL_PME_ENABLE;
-
 	misc_host_ctrl = tr32(TG3PCI_MISC_HOST_CTRL);
 	tw32(TG3PCI_MISC_HOST_CTRL,
 	     misc_host_ctrl | MISC_HOST_CTRL_MASK_PCI_INT);
@@ -2109,8 +2116,6 @@ static int tg3_set_power_state(struct tg3 *tp, pci_power_t state)
 						     WOL_DRV_WOL |
 						     WOL_SET_MAGIC_PKT);
 
-	pci_read_config_word(tp->pdev, pm + PCI_PM_PMC, &power_caps);
-
 	if (tp->tg3_flags & TG3_FLAG_WOL_ENABLE) {
 		u32 mac_mode;
 
@@ -2143,10 +2148,17 @@ static int tg3_set_power_state(struct tg3 *tp, pci_power_t state)
 		if (!(tp->tg3_flags2 & TG3_FLG2_5750_PLUS))
 			tw32(MAC_LED_CTRL, tp->led_ctrl);
 
-		if (((power_caps & PCI_PM_CAP_PME_D3cold) &&
-		     (tp->tg3_flags & TG3_FLAG_WOL_ENABLE)))
+		if (pci_pme_capable(tp->pdev, state) &&
+		     (tp->tg3_flags & TG3_FLAG_WOL_ENABLE))
 			mac_mode |= MAC_MODE_MAGIC_PKT_ENABLE;
 
+		if (tp->tg3_flags3 & TG3_FLG3_ENABLE_APE) {
+			mac_mode |= tp->mac_mode &
+				    (MAC_MODE_APE_TX_EN | MAC_MODE_APE_RX_EN);
+			if (mac_mode & MAC_MODE_APE_TX_EN)
+				mac_mode |= MAC_MODE_TDE_ENABLE;
+		}
+
 		tw32_f(MAC_MODE, mac_mode);
 		udelay(100);
 
@@ -2236,9 +2248,11 @@ static int tg3_set_power_state(struct tg3 *tp, pci_power_t state)
 
 	tg3_write_sig_post_reset(tp, RESET_KIND_SHUTDOWN);
 
+	if (tp->tg3_flags & TG3_FLAG_WOL_ENABLE)
+		pci_enable_wake(tp->pdev, state, true);
+
 	/* Finally, set the new power state. */
-	pci_write_config_word(tp->pdev, pm + PCI_PM_CTRL, power_control);
-	udelay(100);	/* Delay after power state change */
+	pci_set_power_state(tp->pdev, state);
 
 	return 0;
 }
@@ -5514,7 +5528,7 @@ static void tg3_ape_send_event(struct tg3 *tp, u32 event)
 		return;
 
 	apedata = tg3_ape_read32(tp, TG3_APE_FW_STATUS);
-	if (apedata != APE_FW_STATUS_READY)
+	if (!(apedata & APE_FW_STATUS_READY))
 		return;
 
 	/* Wait for up to 1 millisecond for APE to service previous event. */
@@ -5781,6 +5795,8 @@ static int tg3_chip_reset(struct tg3 *tp)
 
 	tg3_mdio_stop(tp);
 
+	tg3_ape_lock(tp, TG3_APE_LOCK_GRC);
+
 	/* No matching tg3_nvram_unlock() after this because
 	 * chip reset below will undo the nvram lock.
 	 */
@@ -5929,12 +5945,19 @@ static int tg3_chip_reset(struct tg3 *tp)
 	} else if (tp->tg3_flags2 & TG3_FLG2_MII_SERDES) {
 		tp->mac_mode = MAC_MODE_PORT_MODE_GMII;
 		tw32_f(MAC_MODE, tp->mac_mode);
+	} else if (tp->tg3_flags3 & TG3_FLG3_ENABLE_APE) {
+		tp->mac_mode &= (MAC_MODE_APE_TX_EN | MAC_MODE_APE_RX_EN);
+		if (tp->mac_mode & MAC_MODE_APE_TX_EN)
+			tp->mac_mode |= MAC_MODE_TDE_ENABLE;
+		tw32_f(MAC_MODE, tp->mac_mode);
 	} else
 		tw32_f(MAC_MODE, 0);
 	udelay(40);
 
 	tg3_mdio_start(tp);
 
+	tg3_ape_unlock(tp, TG3_APE_LOCK_GRC);
+
 	err = tg3_poll_fw(tp);
 	if (err)
 		return err;
@@ -5956,6 +5979,7 @@ static int tg3_chip_reset(struct tg3 *tp)
 		tg3_read_mem(tp, NIC_SRAM_DATA_CFG, &nic_cfg);
 		if (nic_cfg & NIC_SRAM_DATA_CFG_ASF_ENABLE) {
 			tp->tg3_flags |= TG3_FLAG_ENABLE_ASF;
+			tp->last_event_jiffies = jiffies;
 			if (tp->tg3_flags2 & TG3_FLG2_5750_PLUS)
 				tp->tg3_flags2 |= TG3_FLG2_ASF_NEW_HANDSHAKE;
 		}
@@ -5969,15 +5993,12 @@ static void tg3_stop_fw(struct tg3 *tp)
 {
 	if ((tp->tg3_flags & TG3_FLAG_ENABLE_ASF) &&
 	   !(tp->tg3_flags3 & TG3_FLG3_ENABLE_APE)) {
-		u32 val;
-
 		/* Wait for RX cpu to ACK the previous event. */
 		tg3_wait_for_event_ack(tp);
 
 		tg3_write_mem(tp, NIC_SRAM_FW_CMD_MBOX, FWCMD_NICDRV_PAUSE_FW);
-		val = tr32(GRC_RX_CPU_EVENT);
-		val |= GRC_RX_CPU_DRIVER_EVENT;
-		tw32(GRC_RX_CPU_EVENT, val);
+
+		tg3_generate_fw_event(tp);
 
 		/* Wait for RX cpu to ACK this event. */
 		tg3_wait_for_event_ack(tp);
@@ -7427,7 +7448,11 @@ static int tg3_reset_hw(struct tg3 *tp, int reset_phy)
 		udelay(10);
 	}
 
-	tp->mac_mode = MAC_MODE_TXSTAT_ENABLE | MAC_MODE_RXSTAT_ENABLE |
+	if (tp->tg3_flags3 & TG3_FLG3_ENABLE_APE)
+		tp->mac_mode &= MAC_MODE_APE_TX_EN | MAC_MODE_APE_RX_EN;
+	else
+		tp->mac_mode = 0;
+	tp->mac_mode |= MAC_MODE_TXSTAT_ENABLE | MAC_MODE_RXSTAT_ENABLE |
 		MAC_MODE_TDE_ENABLE | MAC_MODE_RDE_ENABLE | MAC_MODE_FHDE_ENABLE;
 	if (!(tp->tg3_flags2 & TG3_FLG2_5705_PLUS) &&
 	    !(tp->tg3_flags2 & TG3_FLG2_PHY_SERDES) &&
@@ -7708,21 +7733,11 @@ static int tg3_reset_hw(struct tg3 *tp, int reset_phy)
  */
 static int tg3_init_hw(struct tg3 *tp, int reset_phy)
 {
-	int err;
-
-	/* Force the chip into D0. */
-	err = tg3_set_power_state(tp, PCI_D0);
-	if (err)
-		goto out;
-
 	tg3_switch_clocks(tp);
 
 	tw32(TG3PCI_MEM_WIN_BASE_ADDR, 0);
 
-	err = tg3_reset_hw(tp, reset_phy);
-
-out:
-	return err;
+	return tg3_reset_hw(tp, reset_phy);
 }
 
 #define TG3_STAT_ADD32(PSTAT, REG) \
@@ -7871,9 +7886,8 @@ static void tg3_timer(unsigned long __opaque)
 	 * resets.
 	 */
 	if (!--tp->asf_counter) {
-		if (tp->tg3_flags & TG3_FLAG_ENABLE_ASF) {
-			u32 val;
-
+		if ((tp->tg3_flags & TG3_FLAG_ENABLE_ASF) &&
+		    !(tp->tg3_flags3 & TG3_FLG3_ENABLE_APE)) {
 			tg3_wait_for_event_ack(tp);
 
 			tg3_write_mem(tp, NIC_SRAM_FW_CMD_MBOX,
@@ -7881,9 +7895,8 @@ static void tg3_timer(unsigned long __opaque)
 			tg3_write_mem(tp, NIC_SRAM_FW_CMD_LEN_MBOX, 4);
 			/* 5 seconds timeout */
 			tg3_write_mem(tp, NIC_SRAM_FW_CMD_DATA_MBOX, 5);
-			val = tr32(GRC_RX_CPU_EVENT);
-			val |= GRC_RX_CPU_DRIVER_EVENT;
-			tw32_f(GRC_RX_CPU_EVENT, val);
+
+			tg3_generate_fw_event(tp);
 		}
 		tp->asf_counter = tp->asf_multiplier;
 	}
@@ -8037,13 +8050,11 @@ static int tg3_open(struct net_device *dev)
 
 	netif_carrier_off(tp->dev);
 
-	tg3_full_lock(tp, 0);
-
 	err = tg3_set_power_state(tp, PCI_D0);
-	if (err) {
-		tg3_full_unlock(tp);
+	if (err)
 		return err;
-	}
+
+	tg3_full_lock(tp, 0);
 
 	tg3_disable_ints(tp);
 	tp->tg3_flags &= ~TG3_FLAG_INIT_COMPLETE;
@@ -8455,6 +8466,11 @@ static inline unsigned long get_stat64(tg3_stat64_t *val)
 	return ret;
 }
 
+static inline u64 get_estat64(tg3_stat64_t *val)
+{
+       return ((u64)val->high << 32) | ((u64)val->low);
+}
+
 static unsigned long calc_crc_errors(struct tg3 *tp)
 {
 	struct tg3_hw_stats *hw_stats = tp->hw_stats;
@@ -8483,7 +8499,7 @@ static unsigned long calc_crc_errors(struct tg3 *tp)
 
 #define ESTAT_ADD(member) \
 	estats->member =	old_estats->member + \
-				get_stat64(&hw_stats->member)
+				get_estat64(&hw_stats->member)
 
 static struct tg3_ethtool_stats *tg3_get_estats(struct tg3 *tp)
 {
@@ -9065,7 +9081,8 @@ static void tg3_get_wol(struct net_device *dev, struct ethtool_wolinfo *wol)
 {
 	struct tg3 *tp = netdev_priv(dev);
 
-	if (tp->tg3_flags & TG3_FLAG_WOL_CAP)
+	if ((tp->tg3_flags & TG3_FLAG_WOL_CAP) &&
+	    device_can_wakeup(&tp->pdev->dev))
 		wol->supported = WAKE_MAGIC;
 	else
 		wol->supported = 0;
@@ -9078,18 +9095,22 @@ static void tg3_get_wol(struct net_device *dev, struct ethtool_wolinfo *wol)
 static int tg3_set_wol(struct net_device *dev, struct ethtool_wolinfo *wol)
 {
 	struct tg3 *tp = netdev_priv(dev);
+	struct device *dp = &tp->pdev->dev;
 
 	if (wol->wolopts & ~WAKE_MAGIC)
 		return -EINVAL;
 	if ((wol->wolopts & WAKE_MAGIC) &&
-	    !(tp->tg3_flags & TG3_FLAG_WOL_CAP))
+	    !((tp->tg3_flags & TG3_FLAG_WOL_CAP) && device_can_wakeup(dp)))
 		return -EINVAL;
 
 	spin_lock_bh(&tp->lock);
-	if (wol->wolopts & WAKE_MAGIC)
+	if (wol->wolopts & WAKE_MAGIC) {
 		tp->tg3_flags |= TG3_FLAG_WOL_ENABLE;
-	else
+		device_set_wakeup_enable(dp, true);
+	} else {
 		tp->tg3_flags &= ~TG3_FLAG_WOL_ENABLE;
+		device_set_wakeup_enable(dp, false);
+	}
 	spin_unlock_bh(&tp->lock);
 
 	return 0;
@@ -11296,7 +11317,8 @@ static void __devinit tg3_get_eeprom_hw_cfg(struct tg3 *tp)
 		if (val & VCPU_CFGSHDW_ASPM_DBNC)
 			tp->tg3_flags |= TG3_FLAG_ASPM_WORKAROUND;
 		if ((val & VCPU_CFGSHDW_WOL_ENABLE) &&
-		    (val & VCPU_CFGSHDW_WOL_MAGPKT))
+		    (val & VCPU_CFGSHDW_WOL_MAGPKT) &&
+		    device_may_wakeup(&tp->pdev->dev))
 			tp->tg3_flags |= TG3_FLAG_WOL_ENABLE;
 		return;
 	}
@@ -11426,8 +11448,9 @@ static void __devinit tg3_get_eeprom_hw_cfg(struct tg3 *tp)
 		    !(nic_cfg & NIC_SRAM_DATA_CFG_FIBER_WOL))
 			tp->tg3_flags &= ~TG3_FLAG_WOL_CAP;
 
-		if (tp->tg3_flags & TG3_FLAG_WOL_CAP &&
-		    nic_cfg & NIC_SRAM_DATA_CFG_WOL_ENABLE)
+		if ((tp->tg3_flags & TG3_FLAG_WOL_CAP) &&
+		    (nic_cfg & NIC_SRAM_DATA_CFG_WOL_ENABLE) &&
+		    device_may_wakeup(&tp->pdev->dev))
 			tp->tg3_flags |= TG3_FLAG_WOL_ENABLE;
 
 		if (cfg2 & (1 << 17))
@@ -12442,6 +12465,13 @@ static int __devinit tg3_get_invariants(struct tg3 *tp)
 				       tp->misc_host_ctrl);
 	}
 
+	/* Preserve the APE MAC_MODE bits */
+	if (tp->tg3_flags3 & TG3_FLG3_ENABLE_APE)
+		tp->mac_mode = tr32(MAC_MODE) |
+			       MAC_MODE_APE_TX_EN | MAC_MODE_APE_RX_EN;
+	else
+		tp->mac_mode = TG3_DEF_MAC_MODE;
+
 	/* these are limited to 10/100 only */
 	if ((GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5703 &&
 	     (grc_misc_cfg == 0x8000 || grc_misc_cfg == 0x4000)) ||
@@ -13301,7 +13331,6 @@ static int __devinit tg3_init_one(struct pci_dev *pdev,
 	tp->pdev = pdev;
 	tp->dev = dev;
 	tp->pm_cap = pm_cap;
-	tp->mac_mode = TG3_DEF_MAC_MODE;
 	tp->rx_mode = TG3_DEF_RX_MODE;
 	tp->tx_mode = TG3_DEF_TX_MODE;
 
@@ -13613,6 +13642,7 @@ static int tg3_suspend(struct pci_dev *pdev, pm_message_t state)
 {
 	struct net_device *dev = pci_get_drvdata(pdev);
 	struct tg3 *tp = netdev_priv(dev);
+	pci_power_t target_state;
 	int err;
 
 	/* PCI register 4 needs to be saved whether netif_running() or not.
@@ -13641,7 +13671,9 @@ static int tg3_suspend(struct pci_dev *pdev, pm_message_t state)
 	tp->tg3_flags &= ~TG3_FLAG_INIT_COMPLETE;
 	tg3_full_unlock(tp);
 
-	err = tg3_set_power_state(tp, pci_choose_state(pdev, state));
+	target_state = pdev->pm_cap ? pci_target_state(pdev) : PCI_D3hot;
+
+	err = tg3_set_power_state(tp, target_state);
 	if (err) {
 		int err2;
 
diff --git a/drivers/net/tg3.h b/drivers/net/tg3.h
index df07842172b7..f5b8cab8d4b5 100644
--- a/drivers/net/tg3.h
+++ b/drivers/net/tg3.h
@@ -325,6 +325,8 @@
 #define  MAC_MODE_TDE_ENABLE		 0x00200000
 #define  MAC_MODE_RDE_ENABLE		 0x00400000
 #define  MAC_MODE_FHDE_ENABLE		 0x00800000
+#define  MAC_MODE_APE_RX_EN		 0x08000000
+#define  MAC_MODE_APE_TX_EN		 0x10000000
 #define MAC_STATUS			0x00000404
 #define  MAC_STATUS_PCS_SYNCED		 0x00000001
 #define  MAC_STATUS_SIGNAL_DET		 0x00000002
@@ -1889,6 +1891,7 @@
 #define  APE_EVENT_STATUS_EVENT_PENDING	 0x80000000
 
 /* APE convenience enumerations. */
+#define TG3_APE_LOCK_GRC                1
 #define TG3_APE_LOCK_MEM                4
 
 #define TG3_EEPROM_SB_F1R2_MBA_OFF	0x10
@@ -2429,7 +2432,10 @@ struct tg3 {
 	struct tg3_ethtool_stats	estats;
 	struct tg3_ethtool_stats	estats_prev;
 
+	union {
 	unsigned long			phy_crc_errors;
+	unsigned long			last_event_jiffies;
+	};
 
 	u32				rx_offset;
 	u32				tg3_flags;
diff --git a/drivers/net/tlan.c b/drivers/net/tlan.c
index 85246ed7cb9c..ec871f646766 100644
--- a/drivers/net/tlan.c
+++ b/drivers/net/tlan.c
@@ -360,8 +360,8 @@ TLan_GetSKB( const struct tlan_list_tag *tag)
 {
 	unsigned long addr;
 
-	addr = tag->buffer[8].address;
-	addr |= (tag->buffer[9].address << 16) << 16;
+	addr = tag->buffer[9].address;
+	addr |= (tag->buffer[8].address << 16) << 16;
 	return (struct sk_buff *) addr;
 }
 
@@ -1984,7 +1984,6 @@ static void TLan_ResetLists( struct net_device *dev )
 	TLanList	*list;
 	dma_addr_t	list_phys;
 	struct sk_buff	*skb;
-	void		*t = NULL;
 
 	priv->txHead = 0;
 	priv->txTail = 0;
@@ -2022,7 +2021,8 @@ static void TLan_ResetLists( struct net_device *dev )
 			}
 
 			skb_reserve( skb, NET_IP_ALIGN );
-			list->buffer[0].address = pci_map_single(priv->pciDev, t,
+			list->buffer[0].address = pci_map_single(priv->pciDev,
+								 skb->data,
 								 TLAN_MAX_FRAME_SIZE,
 								 PCI_DMA_FROMDEVICE);
 			TLan_StoreSKB(list, skb);
diff --git a/drivers/net/tokenring/3c359.c b/drivers/net/tokenring/3c359.c
index 7766cde0d63d..bf621328b601 100644
--- a/drivers/net/tokenring/3c359.c
+++ b/drivers/net/tokenring/3c359.c
@@ -95,20 +95,20 @@ MODULE_DESCRIPTION("3Com 3C359 Velocity XL Token Ring Adapter Driver \n") ;
 static int ringspeed[XL_MAX_ADAPTERS] = {0,} ;
 
 module_param_array(ringspeed, int, NULL, 0);
-MODULE_PARM_DESC(ringspeed,"3c359: Ringspeed selection - 4,16 or 0") ; 
+MODULE_PARM_DESC(ringspeed,"3c359: Ringspeed selection - 4,16 or 0") ;
 
 /* Packet buffer size */
 
 static int pkt_buf_sz[XL_MAX_ADAPTERS] = {0,} ;
  
 module_param_array(pkt_buf_sz, int, NULL, 0) ;
-MODULE_PARM_DESC(pkt_buf_sz,"3c359: Initial buffer size") ; 
+MODULE_PARM_DESC(pkt_buf_sz,"3c359: Initial buffer size") ;
 /* Message Level */
 
-static int message_level[XL_MAX_ADAPTERS] = {0,} ; 
+static int message_level[XL_MAX_ADAPTERS] = {0,} ;
 
 module_param_array(message_level, int, NULL, 0) ;
-MODULE_PARM_DESC(message_level, "3c359: Level of reported messages \n") ; 
+MODULE_PARM_DESC(message_level, "3c359: Level of reported messages") ;
 /* 
  *	This is a real nasty way of doing this, but otherwise you
  *	will be stuck with 1555 lines of hex #'s in the code.
diff --git a/drivers/net/tokenring/lanstreamer.c b/drivers/net/tokenring/lanstreamer.c
index 47d84cd28097..59d1673f9387 100644
--- a/drivers/net/tokenring/lanstreamer.c
+++ b/drivers/net/tokenring/lanstreamer.c
@@ -119,7 +119,6 @@
 #include <linux/pci.h>
 #include <linux/dma-mapping.h>
 #include <linux/spinlock.h>
-#include <linux/version.h>
 #include <linux/bitops.h>
 #include <linux/jiffies.h>
 
diff --git a/drivers/net/tokenring/lanstreamer.h b/drivers/net/tokenring/lanstreamer.h
index e7bb3494afc7..13ccee6449c1 100644
--- a/drivers/net/tokenring/lanstreamer.h
+++ b/drivers/net/tokenring/lanstreamer.h
@@ -60,8 +60,6 @@
  *
  */
 
-#include <linux/version.h>
-
 /* MAX_INTR - the maximum number of times we can loop
  * inside the interrupt function before returning
  * control to the OS (maximum value is 256)
diff --git a/drivers/net/tun.c b/drivers/net/tun.c
index e6bbc639c2d0..6daea0c91862 100644
--- a/drivers/net/tun.c
+++ b/drivers/net/tun.c
@@ -358,6 +358,66 @@ static unsigned int tun_chr_poll(struct file *file, poll_table * wait)
 	return mask;
 }
 
+/* prepad is the amount to reserve at front.  len is length after that.
+ * linear is a hint as to how much to copy (usually headers). */
+static struct sk_buff *tun_alloc_skb(size_t prepad, size_t len, size_t linear,
+				     gfp_t gfp)
+{
+	struct sk_buff *skb;
+	unsigned int i;
+
+	skb = alloc_skb(prepad + len, gfp|__GFP_NOWARN);
+	if (skb) {
+		skb_reserve(skb, prepad);
+		skb_put(skb, len);
+		return skb;
+	}
+
+	/* Under a page?  Don't bother with paged skb. */
+	if (prepad + len < PAGE_SIZE)
+		return NULL;
+
+	/* Start with a normal skb, and add pages. */
+	skb = alloc_skb(prepad + linear, gfp);
+	if (!skb)
+		return NULL;
+
+	skb_reserve(skb, prepad);
+	skb_put(skb, linear);
+
+	len -= linear;
+
+	for (i = 0; i < MAX_SKB_FRAGS; i++) {
+		skb_frag_t *f = &skb_shinfo(skb)->frags[i];
+
+		f->page = alloc_page(gfp|__GFP_ZERO);
+		if (!f->page)
+			break;
+
+		f->page_offset = 0;
+		f->size = PAGE_SIZE;
+
+		skb->data_len += PAGE_SIZE;
+		skb->len += PAGE_SIZE;
+		skb->truesize += PAGE_SIZE;
+		skb_shinfo(skb)->nr_frags++;
+
+		if (len < PAGE_SIZE) {
+			len = 0;
+			break;
+		}
+		len -= PAGE_SIZE;
+	}
+
+	/* Too large, or alloc fail? */
+	if (unlikely(len)) {
+		kfree_skb(skb);
+		skb = NULL;
+	}
+
+	return skb;
+}
+
 /* Get packet from user space buffer */
 static __inline__ ssize_t tun_get_user(struct tun_struct *tun, struct iovec *iv, size_t count)
 {
@@ -391,14 +451,12 @@ static __inline__ ssize_t tun_get_user(struct tun_struct *tun, struct iovec *iv,
 			return -EINVAL;
 	}
 
-	if (!(skb = alloc_skb(len + align, GFP_KERNEL))) {
+	if (!(skb = tun_alloc_skb(align, len, gso.hdr_len, GFP_KERNEL))) {
 		tun->dev->stats.rx_dropped++;
 		return -ENOMEM;
 	}
 
-	if (align)
-		skb_reserve(skb, align);
-	if (memcpy_fromiovec(skb_put(skb, len), iv, len)) {
+	if (skb_copy_datagram_from_iovec(skb, 0, iv, len)) {
 		tun->dev->stats.rx_dropped++;
 		kfree_skb(skb);
 		return -EFAULT;
@@ -748,6 +806,36 @@ static int tun_set_iff(struct net *net, struct file *file, struct ifreq *ifr)
 	return err;
 }
 
+static int tun_get_iff(struct net *net, struct file *file, struct ifreq *ifr)
+{
+	struct tun_struct *tun = file->private_data;
+
+	if (!tun)
+		return -EBADFD;
+
+	DBG(KERN_INFO "%s: tun_get_iff\n", tun->dev->name);
+
+	strcpy(ifr->ifr_name, tun->dev->name);
+
+	ifr->ifr_flags = 0;
+
+	if (ifr->ifr_flags & TUN_TUN_DEV)
+		ifr->ifr_flags |= IFF_TUN;
+	else
+		ifr->ifr_flags |= IFF_TAP;
+
+	if (tun->flags & TUN_NO_PI)
+		ifr->ifr_flags |= IFF_NO_PI;
+
+	if (tun->flags & TUN_ONE_QUEUE)
+		ifr->ifr_flags |= IFF_ONE_QUEUE;
+
+	if (tun->flags & TUN_VNET_HDR)
+		ifr->ifr_flags |= IFF_VNET_HDR;
+
+	return 0;
+}
+
 /* This is like a cut-down ethtool ops, except done via tun fd so no
  * privs required. */
 static int set_offload(struct net_device *dev, unsigned long arg)
@@ -833,6 +921,15 @@ static int tun_chr_ioctl(struct inode *inode, struct file *file,
 	DBG(KERN_INFO "%s: tun_chr_ioctl cmd %d\n", tun->dev->name, cmd);
 
 	switch (cmd) {
+	case TUNGETIFF:
+		ret = tun_get_iff(current->nsproxy->net_ns, file, &ifr);
+		if (ret)
+			return ret;
+
+		if (copy_to_user(argp, &ifr, sizeof(ifr)))
+			return -EFAULT;
+		break;
+
 	case TUNSETNOCSUM:
 		/* Disable/Enable checksum */
 		if (arg)
diff --git a/drivers/net/typhoon.c b/drivers/net/typhoon.c
index 8549f1159a30..734ce0977f02 100644
--- a/drivers/net/typhoon.c
+++ b/drivers/net/typhoon.c
@@ -128,7 +128,6 @@ static const int multicast_filter_limit = 32;
 #include <asm/io.h>
 #include <asm/uaccess.h>
 #include <linux/in6.h>
-#include <linux/version.h>
 #include <linux/dma-mapping.h>
 
 #include "typhoon.h"
diff --git a/drivers/net/usb/Kconfig b/drivers/net/usb/Kconfig
index 68e198bd538b..0973b6e37024 100644
--- a/drivers/net/usb/Kconfig
+++ b/drivers/net/usb/Kconfig
@@ -154,17 +154,6 @@ config USB_NET_AX8817X
 	  This driver creates an interface named "ethX", where X depends on
 	  what other networking devices you have in use.
 
-config USB_HSO
-	tristate "Option USB High Speed Mobile Devices"
-	depends on USB && RFKILL
-	default n
-	help
-	  Choose this option if you have an Option HSDPA/HSUPA card.
-	  These cards support downlink speeds of 7.2Mbps or greater.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called hso.
-
 config USB_NET_CDCETHER
 	tristate "CDC Ethernet support (smart devices such as cable modems)"
 	depends on USB_USBNET
@@ -337,5 +326,15 @@ config USB_NET_ZAURUS
 	  really need this non-conformant variant of CDC Ethernet (or in
 	  some cases CDC MDLM) protocol, not "g_ether".
 
+config USB_HSO
+	tristate "Option USB High Speed Mobile Devices"
+	depends on USB && RFKILL
+	default n
+	help
+	  Choose this option if you have an Option HSDPA/HSUPA card.
+	  These cards support downlink speeds of 7.2Mbps or greater.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called hso.
 
 endmenu
diff --git a/drivers/net/usb/dm9601.c b/drivers/net/usb/dm9601.c
index f7319d326912..78df2be8a728 100644
--- a/drivers/net/usb/dm9601.c
+++ b/drivers/net/usb/dm9601.c
@@ -55,12 +55,28 @@
 
 static int dm_read(struct usbnet *dev, u8 reg, u16 length, void *data)
 {
+	void *buf;
+	int err = -ENOMEM;
+
 	devdbg(dev, "dm_read() reg=0x%02x length=%d", reg, length);
-	return usb_control_msg(dev->udev,
-			       usb_rcvctrlpipe(dev->udev, 0),
-			       DM_READ_REGS,
-			       USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
-			       0, reg, data, length, USB_CTRL_SET_TIMEOUT);
+
+	buf = kmalloc(length, GFP_KERNEL);
+	if (!buf)
+		goto out;
+
+	err = usb_control_msg(dev->udev,
+			      usb_rcvctrlpipe(dev->udev, 0),
+			      DM_READ_REGS,
+			      USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
+			      0, reg, buf, length, USB_CTRL_SET_TIMEOUT);
+	if (err == length)
+		memcpy(data, buf, length);
+	else if (err >= 0)
+		err = -EINVAL;
+	kfree(buf);
+
+ out:
+	return err;
 }
 
 static int dm_read_reg(struct usbnet *dev, u8 reg, u8 *value)
@@ -70,12 +86,28 @@ static int dm_read_reg(struct usbnet *dev, u8 reg, u8 *value)
 
 static int dm_write(struct usbnet *dev, u8 reg, u16 length, void *data)
 {
+	void *buf = NULL;
+	int err = -ENOMEM;
+
 	devdbg(dev, "dm_write() reg=0x%02x, length=%d", reg, length);
-	return usb_control_msg(dev->udev,
-			       usb_sndctrlpipe(dev->udev, 0),
-			       DM_WRITE_REGS,
-			       USB_DIR_OUT | USB_TYPE_VENDOR |USB_RECIP_DEVICE,
-			       0, reg, data, length, USB_CTRL_SET_TIMEOUT);
+
+	if (data) {
+		buf = kmalloc(length, GFP_KERNEL);
+		if (!buf)
+			goto out;
+		memcpy(buf, data, length);
+	}
+
+	err = usb_control_msg(dev->udev,
+			      usb_sndctrlpipe(dev->udev, 0),
+			      DM_WRITE_REGS,
+			      USB_DIR_OUT | USB_TYPE_VENDOR |USB_RECIP_DEVICE,
+			      0, reg, buf, length, USB_CTRL_SET_TIMEOUT);
+	kfree(buf);
+	if (err >= 0 && err < length)
+		err = -EINVAL;
+ out:
+	return err;
 }
 
 static int dm_write_reg(struct usbnet *dev, u8 reg, u8 value)
diff --git a/drivers/net/usb/hso.c b/drivers/net/usb/hso.c
index 031d07b105af..6e42b5a8c22b 100644
--- a/drivers/net/usb/hso.c
+++ b/drivers/net/usb/hso.c
@@ -102,8 +102,12 @@
 
 #define MAX_RX_URBS			2
 
-#define get_serial_by_tty(x)	\
-	(x ? (struct hso_serial *)x->driver_data : NULL)
+static inline struct hso_serial *get_serial_by_tty(struct tty_struct *tty)
+{
+	if (tty)
+		return tty->driver_data;
+	return NULL;
+}
 
 /*****************************************************************************/
 /* Debugging functions                                                       */
@@ -294,24 +298,25 @@ static int hso_get_activity(struct hso_device *hso_dev);
 
 /* #define DEBUG */
 
-#define dev2net(x) (x->port_data.dev_net)
-#define dev2ser(x) (x->port_data.dev_serial)
+static inline struct hso_net *dev2net(struct hso_device *hso_dev)
+{
+	return hso_dev->port_data.dev_net;
+}
+
+static inline struct hso_serial *dev2ser(struct hso_device *hso_dev)
+{
+	return hso_dev->port_data.dev_serial;
+}
 
 /* Debugging functions */
 #ifdef DEBUG
 static void dbg_dump(int line_count, const char *func_name, unsigned char *buf,
 		     unsigned int len)
 {
-	u8 i = 0;
+	static char name[255];
 
-	printk(KERN_DEBUG "[%d:%s]: len %d", line_count, func_name, len);
-
-	for (i = 0; i < len; i++) {
-		if (!(i % 16))
-			printk("\n    0x%03x:  ", i);
-		printk("%02x ", (unsigned char)buf[i]);
-	}
-	printk("\n");
+	sprintf(name, "hso[%d:%s]", line_count, func_name);
+	print_hex_dump_bytes(name, DUMP_PREFIX_NONE, buf, len);
 }
 
 #define DUMP(buf_, len_)	\
@@ -392,7 +397,7 @@ static const struct usb_device_id hso_ids[] = {
 	{default_port_device(0x0af0, 0xc031)},	/* Icon-Edge */
 	{icon321_port_device(0x0af0, 0xd013)},	/* Module HSxPA */
 	{icon321_port_device(0x0af0, 0xd031)},	/* Icon-321 */
-	{default_port_device(0x0af0, 0xd033)},	/* Icon-322 */
+	{icon321_port_device(0x0af0, 0xd033)},	/* Icon-322 */
 	{USB_DEVICE(0x0af0, 0x7301)},		/* GE40x */
 	{USB_DEVICE(0x0af0, 0x7361)},		/* GE40x */
 	{USB_DEVICE(0x0af0, 0x7401)},		/* GI 0401 */
@@ -528,13 +533,12 @@ static struct hso_serial *get_serial_by_shared_int_and_type(
 
 static struct hso_serial *get_serial_by_index(unsigned index)
 {
-	struct hso_serial *serial;
+	struct hso_serial *serial = NULL;
 	unsigned long flags;
 
-	if (!serial_table[index])
-		return NULL;
 	spin_lock_irqsave(&serial_table_lock, flags);
-	serial = dev2ser(serial_table[index]);
+	if (serial_table[index])
+		serial = dev2ser(serial_table[index]);
 	spin_unlock_irqrestore(&serial_table_lock, flags);
 
 	return serial;
@@ -561,6 +565,7 @@ static int get_free_serial_index(void)
 static void set_serial_by_index(unsigned index, struct hso_serial *serial)
 {
 	unsigned long flags;
+
 	spin_lock_irqsave(&serial_table_lock, flags);
 	if (serial)
 		serial_table[index] = serial->parent;
@@ -569,7 +574,7 @@ static void set_serial_by_index(unsigned index, struct hso_serial *serial)
 	spin_unlock_irqrestore(&serial_table_lock, flags);
 }
 
-/* log a meaningfull explanation of an USB status */
+/* log a meaningful explanation of an USB status */
 static void log_usb_status(int status, const char *function)
 {
 	char *explanation;
@@ -1103,8 +1108,8 @@ static void hso_serial_close(struct tty_struct *tty, struct file *filp)
 	/* reset the rts and dtr */
 	/* do the actual close */
 	serial->open_count--;
+	kref_put(&serial->parent->ref, hso_serial_ref_free);
 	if (serial->open_count <= 0) {
-		kref_put(&serial->parent->ref, hso_serial_ref_free);
 		serial->open_count = 0;
 		if (serial->tty) {
 			serial->tty->driver_data = NULL;
@@ -1467,7 +1472,8 @@ static void hso_std_serial_write_bulk_callback(struct urb *urb)
 		return;
 	}
 	hso_put_activity(serial->parent);
-	tty_wakeup(serial->tty);
+	if (serial->tty)
+		tty_wakeup(serial->tty);
 	hso_kick_transmit(serial);
 
 	D1(" ");
@@ -1538,7 +1544,8 @@ static void ctrl_callback(struct urb *urb)
 			clear_bit(HSO_SERIAL_FLAG_RX_SENT, &serial->flags);
 	} else {
 		hso_put_activity(serial->parent);
-		tty_wakeup(serial->tty);
+		if (serial->tty)
+			tty_wakeup(serial->tty);
 		/* response to a write command */
 		hso_kick_transmit(serial);
 	}
@@ -2606,6 +2613,7 @@ static int hso_resume(struct usb_interface *iface)
 					"Transmitting lingering data\n");
 				hso_net_start_xmit(hso_net->skb_tx_buf,
 						   hso_net->net);
+				hso_net->skb_tx_buf = NULL;
 			}
 			result = hso_start_net_device(network_table[i]);
 			if (result)
@@ -2652,7 +2660,7 @@ static void hso_free_interface(struct usb_interface *interface)
 			hso_stop_net_device(network_table[i]);
 			cancel_work_sync(&network_table[i]->async_put_intf);
 			cancel_work_sync(&network_table[i]->async_get_intf);
-			if(rfk)
+			if (rfk)
 				rfkill_unregister(rfk);
 			hso_free_net_device(network_table[i]);
 		}
@@ -2723,7 +2731,7 @@ static int hso_mux_submit_intr_urb(struct hso_shared_int *shared_int,
 }
 
 /* operations setup of the serial interface */
-static struct tty_operations hso_serial_ops = {
+static const struct tty_operations hso_serial_ops = {
 	.open = hso_serial_open,
 	.close = hso_serial_close,
 	.write = hso_serial_write,
diff --git a/drivers/net/usb/mcs7830.c b/drivers/net/usb/mcs7830.c
index c3d119f997f5..ca9d00c1194e 100644
--- a/drivers/net/usb/mcs7830.c
+++ b/drivers/net/usb/mcs7830.c
@@ -46,6 +46,10 @@
 
 #define MCS7830_VENDOR_ID	0x9710
 #define MCS7830_PRODUCT_ID	0x7830
+#define MCS7730_PRODUCT_ID	0x7730
+
+#define SITECOM_VENDOR_ID	0x0DF6
+#define LN_030_PRODUCT_ID	0x0021
 
 #define MCS7830_MII_ADVERTISE	(ADVERTISE_PAUSE_CAP | ADVERTISE_100FULL | \
 				 ADVERTISE_100HALF | ADVERTISE_10FULL | \
@@ -442,6 +446,29 @@ static struct ethtool_ops mcs7830_ethtool_ops = {
 	.nway_reset		= usbnet_nway_reset,
 };
 
+static int mcs7830_set_mac_address(struct net_device *netdev, void *p)
+{
+	int ret;
+	struct usbnet *dev = netdev_priv(netdev);
+	struct sockaddr *addr = p;
+
+	if (netif_running(netdev))
+		return -EBUSY;
+
+	if (!is_valid_ether_addr(addr->sa_data))
+		return -EINVAL;
+
+	memcpy(netdev->dev_addr, addr->sa_data, netdev->addr_len);
+
+	ret = mcs7830_set_reg(dev, HIF_REG_ETHERNET_ADDR, ETH_ALEN,
+			netdev->dev_addr);
+
+	if (ret < 0)
+		return ret;
+
+	return 0;
+}
+
 static int mcs7830_bind(struct usbnet *dev, struct usb_interface *udev)
 {
 	struct net_device *net = dev->net;
@@ -455,6 +482,7 @@ static int mcs7830_bind(struct usbnet *dev, struct usb_interface *udev)
 	net->ethtool_ops = &mcs7830_ethtool_ops;
 	net->set_multicast_list = mcs7830_set_multicast;
 	mcs7830_set_multicast(net);
+	net->set_mac_address = mcs7830_set_mac_address;
 
 	/* reserve space for the status byte on rx */
 	dev->rx_urb_size = ETH_FRAME_LEN + 1;
@@ -491,7 +519,16 @@ static int mcs7830_rx_fixup(struct usbnet *dev, struct sk_buff *skb)
 }
 
 static const struct driver_info moschip_info = {
-	.description	= "MOSCHIP 7830 usb-NET adapter",
+	.description	= "MOSCHIP 7830/7730 usb-NET adapter",
+	.bind		= mcs7830_bind,
+	.rx_fixup	= mcs7830_rx_fixup,
+	.flags		= FLAG_ETHER,
+	.in		= 1,
+	.out		= 2,
+};
+
+static const struct driver_info sitecom_info = {
+	.description    = "Sitecom LN-30 usb-NET adapter",
 	.bind		= mcs7830_bind,
 	.rx_fixup	= mcs7830_rx_fixup,
 	.flags		= FLAG_ETHER,
@@ -504,6 +541,14 @@ static const struct usb_device_id products[] = {
 		USB_DEVICE(MCS7830_VENDOR_ID, MCS7830_PRODUCT_ID),
 		.driver_info = (unsigned long) &moschip_info,
 	},
+	{
+		USB_DEVICE(MCS7830_VENDOR_ID, MCS7730_PRODUCT_ID),
+		.driver_info = (unsigned long) &moschip_info,
+	},
+	{
+		USB_DEVICE(SITECOM_VENDOR_ID, LN_030_PRODUCT_ID),
+		.driver_info = (unsigned long) &sitecom_info,
+	},
 	{},
 };
 MODULE_DEVICE_TABLE(usb, products);
diff --git a/drivers/net/usb/pegasus.c b/drivers/net/usb/pegasus.c
index b588c890ea70..8c19307e5040 100644
--- a/drivers/net/usb/pegasus.c
+++ b/drivers/net/usb/pegasus.c
@@ -117,7 +117,7 @@ static void ctrl_callback(struct urb *urb)
 	case -ENOENT:
 		break;
 	default:
-		if (netif_msg_drv(pegasus))
+		if (netif_msg_drv(pegasus) && printk_ratelimit())
 			dev_dbg(&pegasus->intf->dev, "%s, status %d\n",
 				__FUNCTION__, urb->status);
 	}
@@ -166,7 +166,7 @@ static int get_registers(pegasus_t * pegasus, __u16 indx, __u16 size,
 		set_current_state(TASK_RUNNING);
 		if (ret == -ENODEV)
 			netif_device_detach(pegasus->net);
-		if (netif_msg_drv(pegasus))
+		if (netif_msg_drv(pegasus) && printk_ratelimit())
 			dev_err(&pegasus->intf->dev, "%s, status %d\n",
 					__FUNCTION__, ret);
 		goto out;
@@ -275,7 +275,7 @@ static int set_register(pegasus_t * pegasus, __u16 indx, __u8 data)
 	if ((ret = usb_submit_urb(pegasus->ctrl_urb, GFP_ATOMIC))) {
 		if (ret == -ENODEV)
 			netif_device_detach(pegasus->net);
-		if (netif_msg_drv(pegasus))
+		if (netif_msg_drv(pegasus) && printk_ratelimit())
 			dev_err(&pegasus->intf->dev, "%s, status %d\n",
 					__FUNCTION__, ret);
 		goto out;
@@ -1209,8 +1209,7 @@ static void pegasus_set_multicast(struct net_device *net)
 		pegasus->eth_regs[EthCtrl2] |= RX_PROMISCUOUS;
 		if (netif_msg_link(pegasus))
 			pr_info("%s: Promiscuous mode enabled.\n", net->name);
-	} else if (net->mc_count ||
-		   (net->flags & IFF_ALLMULTI)) {
+	} else if (net->mc_count || (net->flags & IFF_ALLMULTI)) {
 		pegasus->eth_regs[EthCtrl0] |= RX_MULTICAST;
 		pegasus->eth_regs[EthCtrl2] &= ~RX_PROMISCUOUS;
 		if (netif_msg_link(pegasus))
@@ -1220,6 +1219,8 @@ static void pegasus_set_multicast(struct net_device *net)
 		pegasus->eth_regs[EthCtrl2] &= ~RX_PROMISCUOUS;
 	}
 
+	pegasus->ctrl_urb->status = 0;
+
 	pegasus->flags |= ETH_REGS_CHANGE;
 	ctrl_callback(pegasus->ctrl_urb);
 }
@@ -1285,6 +1286,21 @@ static void check_carrier(struct work_struct *work)
 	}
 }
 
+static int pegasus_blacklisted(struct usb_device *udev)
+{
+	struct usb_device_descriptor *udd = &udev->descriptor;
+
+	/* Special quirk to keep the driver from handling the Belkin Bluetooth
+	 * dongle which happens to have the same ID.
+	 */
+	if ((udd->idVendor == VENDOR_BELKIN && udd->idProduct == 0x0121) &&
+	    (udd->bDeviceClass == USB_CLASS_WIRELESS_CONTROLLER) &&
+	    (udd->bDeviceProtocol == 1))
+		return 1;
+
+	return 0;
+}
+
 static int pegasus_probe(struct usb_interface *intf,
 			 const struct usb_device_id *id)
 {
@@ -1296,6 +1312,12 @@ static int pegasus_probe(struct usb_interface *intf,
 	DECLARE_MAC_BUF(mac);
 
 	usb_get_dev(dev);
+
+	if (pegasus_blacklisted(dev)) {
+		res = -ENODEV;
+		goto out;
+	}
+
 	net = alloc_etherdev(sizeof(struct pegasus));
 	if (!net) {
 		dev_err(&intf->dev, "can't allocate %s\n", "device");
diff --git a/drivers/net/via-velocity.c b/drivers/net/via-velocity.c
index 370ce30f2f45..007c12970065 100644
--- a/drivers/net/via-velocity.c
+++ b/drivers/net/via-velocity.c
@@ -662,6 +662,10 @@ static void velocity_vlan_rx_kill_vid(struct net_device *dev, unsigned short vid
         spin_unlock_irq(&vptr->lock);
 }
 
+static void velocity_init_rx_ring_indexes(struct velocity_info *vptr)
+{
+	vptr->rx.dirty = vptr->rx.filled = vptr->rx.curr = 0;
+}
 
 /**
  *	velocity_rx_reset	-	handle a receive reset
@@ -677,16 +681,16 @@ static void velocity_rx_reset(struct velocity_info *vptr)
 	struct mac_regs __iomem * regs = vptr->mac_regs;
 	int i;
 
-	vptr->rd_dirty = vptr->rd_filled = vptr->rd_curr = 0;
+	velocity_init_rx_ring_indexes(vptr);
 
 	/*
 	 *	Init state, all RD entries belong to the NIC
 	 */
 	for (i = 0; i < vptr->options.numrx; ++i)
-		vptr->rd_ring[i].rdesc0.len |= OWNED_BY_NIC;
+		vptr->rx.ring[i].rdesc0.len |= OWNED_BY_NIC;
 
 	writew(vptr->options.numrx, &regs->RBRDU);
-	writel(vptr->rd_pool_dma, &regs->RDBaseLo);
+	writel(vptr->rx.pool_dma, &regs->RDBaseLo);
 	writew(0, &regs->RDIdx);
 	writew(vptr->options.numrx - 1, &regs->RDCSize);
 }
@@ -779,15 +783,15 @@ static void velocity_init_registers(struct velocity_info *vptr,
 
 		vptr->int_mask = INT_MASK_DEF;
 
-		writel(vptr->rd_pool_dma, &regs->RDBaseLo);
+		writel(vptr->rx.pool_dma, &regs->RDBaseLo);
 		writew(vptr->options.numrx - 1, &regs->RDCSize);
 		mac_rx_queue_run(regs);
 		mac_rx_queue_wake(regs);
 
 		writew(vptr->options.numtx - 1, &regs->TDCSize);
 
-		for (i = 0; i < vptr->num_txq; i++) {
-			writel(vptr->td_pool_dma[i], &regs->TDBaseLo[i]);
+		for (i = 0; i < vptr->tx.numq; i++) {
+			writel(vptr->tx.pool_dma[i], &regs->TDBaseLo[i]);
 			mac_tx_queue_run(regs, i);
 		}
 
@@ -1047,7 +1051,7 @@ static void __devinit velocity_init_info(struct pci_dev *pdev,
 
 	vptr->pdev = pdev;
 	vptr->chip_id = info->chip_id;
-	vptr->num_txq = info->txqueue;
+	vptr->tx.numq = info->txqueue;
 	vptr->multicast_limit = MCAM_SIZE;
 	spin_lock_init(&vptr->lock);
 	INIT_LIST_HEAD(&vptr->list);
@@ -1093,14 +1097,14 @@ static int __devinit velocity_get_pci_info(struct velocity_info *vptr, struct pc
 }
 
 /**
- *	velocity_init_rings	-	set up DMA rings
+ *	velocity_init_dma_rings	-	set up DMA rings
  *	@vptr: Velocity to set up
  *
  *	Allocate PCI mapped DMA rings for the receive and transmit layer
  *	to use.
  */
 
-static int velocity_init_rings(struct velocity_info *vptr)
+static int velocity_init_dma_rings(struct velocity_info *vptr)
 {
 	struct velocity_opt *opt = &vptr->options;
 	const unsigned int rx_ring_size = opt->numrx * sizeof(struct rx_desc);
@@ -1116,7 +1120,7 @@ static int velocity_init_rings(struct velocity_info *vptr)
 	 * pci_alloc_consistent() fulfills the requirement for 64 bytes
 	 * alignment
 	 */
-	pool = pci_alloc_consistent(pdev, tx_ring_size * vptr->num_txq +
+	pool = pci_alloc_consistent(pdev, tx_ring_size * vptr->tx.numq +
 				    rx_ring_size, &pool_dma);
 	if (!pool) {
 		dev_err(&pdev->dev, "%s : DMA memory allocation failed.\n",
@@ -1124,15 +1128,15 @@ static int velocity_init_rings(struct velocity_info *vptr)
 		return -ENOMEM;
 	}
 
-	vptr->rd_ring = pool;
-	vptr->rd_pool_dma = pool_dma;
+	vptr->rx.ring = pool;
+	vptr->rx.pool_dma = pool_dma;
 
 	pool += rx_ring_size;
 	pool_dma += rx_ring_size;
 
-	for (i = 0; i < vptr->num_txq; i++) {
-		vptr->td_rings[i] = pool;
-		vptr->td_pool_dma[i] = pool_dma;
+	for (i = 0; i < vptr->tx.numq; i++) {
+		vptr->tx.rings[i] = pool;
+		vptr->tx.pool_dma[i] = pool_dma;
 		pool += tx_ring_size;
 		pool_dma += tx_ring_size;
 	}
@@ -1141,18 +1145,18 @@ static int velocity_init_rings(struct velocity_info *vptr)
 }
 
 /**
- *	velocity_free_rings	-	free PCI ring pointers
+ *	velocity_free_dma_rings	-	free PCI ring pointers
  *	@vptr: Velocity to free from
  *
  *	Clean up the PCI ring buffers allocated to this velocity.
  */
 
-static void velocity_free_rings(struct velocity_info *vptr)
+static void velocity_free_dma_rings(struct velocity_info *vptr)
 {
 	const int size = vptr->options.numrx * sizeof(struct rx_desc) +
-		vptr->options.numtx * sizeof(struct tx_desc) * vptr->num_txq;
+		vptr->options.numtx * sizeof(struct tx_desc) * vptr->tx.numq;
 
-	pci_free_consistent(vptr->pdev, size, vptr->rd_ring, vptr->rd_pool_dma);
+	pci_free_consistent(vptr->pdev, size, vptr->rx.ring, vptr->rx.pool_dma);
 }
 
 static void velocity_give_many_rx_descs(struct velocity_info *vptr)
@@ -1164,44 +1168,44 @@ static void velocity_give_many_rx_descs(struct velocity_info *vptr)
 	 * RD number must be equal to 4X per hardware spec
 	 * (programming guide rev 1.20, p.13)
 	 */
-	if (vptr->rd_filled < 4)
+	if (vptr->rx.filled < 4)
 		return;
 
 	wmb();
 
-	unusable = vptr->rd_filled & 0x0003;
-	dirty = vptr->rd_dirty - unusable;
-	for (avail = vptr->rd_filled & 0xfffc; avail; avail--) {
+	unusable = vptr->rx.filled & 0x0003;
+	dirty = vptr->rx.dirty - unusable;
+	for (avail = vptr->rx.filled & 0xfffc; avail; avail--) {
 		dirty = (dirty > 0) ? dirty - 1 : vptr->options.numrx - 1;
-		vptr->rd_ring[dirty].rdesc0.len |= OWNED_BY_NIC;
+		vptr->rx.ring[dirty].rdesc0.len |= OWNED_BY_NIC;
 	}
 
-	writew(vptr->rd_filled & 0xfffc, &regs->RBRDU);
-	vptr->rd_filled = unusable;
+	writew(vptr->rx.filled & 0xfffc, &regs->RBRDU);
+	vptr->rx.filled = unusable;
 }
 
 static int velocity_rx_refill(struct velocity_info *vptr)
 {
-	int dirty = vptr->rd_dirty, done = 0;
+	int dirty = vptr->rx.dirty, done = 0;
 
 	do {
-		struct rx_desc *rd = vptr->rd_ring + dirty;
+		struct rx_desc *rd = vptr->rx.ring + dirty;
 
 		/* Fine for an all zero Rx desc at init time as well */
 		if (rd->rdesc0.len & OWNED_BY_NIC)
 			break;
 
-		if (!vptr->rd_info[dirty].skb) {
+		if (!vptr->rx.info[dirty].skb) {
 			if (velocity_alloc_rx_buf(vptr, dirty) < 0)
 				break;
 		}
 		done++;
 		dirty = (dirty < vptr->options.numrx - 1) ? dirty + 1 : 0;
-	} while (dirty != vptr->rd_curr);
+	} while (dirty != vptr->rx.curr);
 
 	if (done) {
-		vptr->rd_dirty = dirty;
-		vptr->rd_filled += done;
+		vptr->rx.dirty = dirty;
+		vptr->rx.filled += done;
 	}
 
 	return done;
@@ -1209,7 +1213,7 @@ static int velocity_rx_refill(struct velocity_info *vptr)
 
 static void velocity_set_rxbufsize(struct velocity_info *vptr, int mtu)
 {
-	vptr->rx_buf_sz = (mtu <= ETH_DATA_LEN) ? PKT_BUF_SZ : mtu + 32;
+	vptr->rx.buf_sz = (mtu <= ETH_DATA_LEN) ? PKT_BUF_SZ : mtu + 32;
 }
 
 /**
@@ -1224,12 +1228,12 @@ static int velocity_init_rd_ring(struct velocity_info *vptr)
 {
 	int ret = -ENOMEM;
 
-	vptr->rd_info = kcalloc(vptr->options.numrx,
+	vptr->rx.info = kcalloc(vptr->options.numrx,
 				sizeof(struct velocity_rd_info), GFP_KERNEL);
-	if (!vptr->rd_info)
+	if (!vptr->rx.info)
 		goto out;
 
-	vptr->rd_filled = vptr->rd_dirty = vptr->rd_curr = 0;
+	velocity_init_rx_ring_indexes(vptr);
 
 	if (velocity_rx_refill(vptr) != vptr->options.numrx) {
 		VELOCITY_PRT(MSG_LEVEL_ERR, KERN_ERR
@@ -1255,18 +1259,18 @@ static void velocity_free_rd_ring(struct velocity_info *vptr)
 {
 	int i;
 
-	if (vptr->rd_info == NULL)
+	if (vptr->rx.info == NULL)
 		return;
 
 	for (i = 0; i < vptr->options.numrx; i++) {
-		struct velocity_rd_info *rd_info = &(vptr->rd_info[i]);
-		struct rx_desc *rd = vptr->rd_ring + i;
+		struct velocity_rd_info *rd_info = &(vptr->rx.info[i]);
+		struct rx_desc *rd = vptr->rx.ring + i;
 
 		memset(rd, 0, sizeof(*rd));
 
 		if (!rd_info->skb)
 			continue;
-		pci_unmap_single(vptr->pdev, rd_info->skb_dma, vptr->rx_buf_sz,
+		pci_unmap_single(vptr->pdev, rd_info->skb_dma, vptr->rx.buf_sz,
 				 PCI_DMA_FROMDEVICE);
 		rd_info->skb_dma = (dma_addr_t) NULL;
 
@@ -1274,8 +1278,8 @@ static void velocity_free_rd_ring(struct velocity_info *vptr)
 		rd_info->skb = NULL;
 	}
 
-	kfree(vptr->rd_info);
-	vptr->rd_info = NULL;
+	kfree(vptr->rx.info);
+	vptr->rx.info = NULL;
 }
 
 /**
@@ -1293,19 +1297,19 @@ static int velocity_init_td_ring(struct velocity_info *vptr)
 	unsigned int j;
 
 	/* Init the TD ring entries */
-	for (j = 0; j < vptr->num_txq; j++) {
-		curr = vptr->td_pool_dma[j];
+	for (j = 0; j < vptr->tx.numq; j++) {
+		curr = vptr->tx.pool_dma[j];
 
-		vptr->td_infos[j] = kcalloc(vptr->options.numtx,
+		vptr->tx.infos[j] = kcalloc(vptr->options.numtx,
 					    sizeof(struct velocity_td_info),
 					    GFP_KERNEL);
-		if (!vptr->td_infos[j])	{
+		if (!vptr->tx.infos[j])	{
 			while(--j >= 0)
-				kfree(vptr->td_infos[j]);
+				kfree(vptr->tx.infos[j]);
 			return -ENOMEM;
 		}
 
-		vptr->td_tail[j] = vptr->td_curr[j] = vptr->td_used[j] = 0;
+		vptr->tx.tail[j] = vptr->tx.curr[j] = vptr->tx.used[j] = 0;
 	}
 	return 0;
 }
@@ -1317,7 +1321,7 @@ static int velocity_init_td_ring(struct velocity_info *vptr)
 static void velocity_free_td_ring_entry(struct velocity_info *vptr,
 							 int q, int n)
 {
-	struct velocity_td_info * td_info = &(vptr->td_infos[q][n]);
+	struct velocity_td_info * td_info = &(vptr->tx.infos[q][n]);
 	int i;
 
 	if (td_info == NULL)
@@ -1349,15 +1353,15 @@ static void velocity_free_td_ring(struct velocity_info *vptr)
 {
 	int i, j;
 
-	for (j = 0; j < vptr->num_txq; j++) {
-		if (vptr->td_infos[j] == NULL)
+	for (j = 0; j < vptr->tx.numq; j++) {
+		if (vptr->tx.infos[j] == NULL)
 			continue;
 		for (i = 0; i < vptr->options.numtx; i++) {
 			velocity_free_td_ring_entry(vptr, j, i);
 
 		}
-		kfree(vptr->td_infos[j]);
-		vptr->td_infos[j] = NULL;
+		kfree(vptr->tx.infos[j]);
+		vptr->tx.infos[j] = NULL;
 	}
 }
 
@@ -1374,13 +1378,13 @@ static void velocity_free_td_ring(struct velocity_info *vptr)
 static int velocity_rx_srv(struct velocity_info *vptr, int status)
 {
 	struct net_device_stats *stats = &vptr->stats;
-	int rd_curr = vptr->rd_curr;
+	int rd_curr = vptr->rx.curr;
 	int works = 0;
 
 	do {
-		struct rx_desc *rd = vptr->rd_ring + rd_curr;
+		struct rx_desc *rd = vptr->rx.ring + rd_curr;
 
-		if (!vptr->rd_info[rd_curr].skb)
+		if (!vptr->rx.info[rd_curr].skb)
 			break;
 
 		if (rd->rdesc0.len & OWNED_BY_NIC)
@@ -1412,7 +1416,7 @@ static int velocity_rx_srv(struct velocity_info *vptr, int status)
 			rd_curr = 0;
 	} while (++works <= 15);
 
-	vptr->rd_curr = rd_curr;
+	vptr->rx.curr = rd_curr;
 
 	if ((works > 0) && (velocity_rx_refill(vptr) > 0))
 		velocity_give_many_rx_descs(vptr);
@@ -1510,8 +1514,8 @@ static int velocity_receive_frame(struct velocity_info *vptr, int idx)
 {
 	void (*pci_action)(struct pci_dev *, dma_addr_t, size_t, int);
 	struct net_device_stats *stats = &vptr->stats;
-	struct velocity_rd_info *rd_info = &(vptr->rd_info[idx]);
-	struct rx_desc *rd = &(vptr->rd_ring[idx]);
+	struct velocity_rd_info *rd_info = &(vptr->rx.info[idx]);
+	struct rx_desc *rd = &(vptr->rx.ring[idx]);
 	int pkt_len = le16_to_cpu(rd->rdesc0.len) & 0x3fff;
 	struct sk_buff *skb;
 
@@ -1527,7 +1531,7 @@ static int velocity_receive_frame(struct velocity_info *vptr, int idx)
 	skb = rd_info->skb;
 
 	pci_dma_sync_single_for_cpu(vptr->pdev, rd_info->skb_dma,
-				    vptr->rx_buf_sz, PCI_DMA_FROMDEVICE);
+				    vptr->rx.buf_sz, PCI_DMA_FROMDEVICE);
 
 	/*
 	 *	Drop frame not meeting IEEE 802.3
@@ -1550,7 +1554,7 @@ static int velocity_receive_frame(struct velocity_info *vptr, int idx)
 		rd_info->skb = NULL;
 	}
 
-	pci_action(vptr->pdev, rd_info->skb_dma, vptr->rx_buf_sz,
+	pci_action(vptr->pdev, rd_info->skb_dma, vptr->rx.buf_sz,
 		   PCI_DMA_FROMDEVICE);
 
 	skb_put(skb, pkt_len - 4);
@@ -1580,10 +1584,10 @@ static int velocity_receive_frame(struct velocity_info *vptr, int idx)
 
 static int velocity_alloc_rx_buf(struct velocity_info *vptr, int idx)
 {
-	struct rx_desc *rd = &(vptr->rd_ring[idx]);
-	struct velocity_rd_info *rd_info = &(vptr->rd_info[idx]);
+	struct rx_desc *rd = &(vptr->rx.ring[idx]);
+	struct velocity_rd_info *rd_info = &(vptr->rx.info[idx]);
 
-	rd_info->skb = netdev_alloc_skb(vptr->dev, vptr->rx_buf_sz + 64);
+	rd_info->skb = dev_alloc_skb(vptr->rx.buf_sz + 64);
 	if (rd_info->skb == NULL)
 		return -ENOMEM;
 
@@ -1592,14 +1596,15 @@ static int velocity_alloc_rx_buf(struct velocity_info *vptr, int idx)
 	 *	64byte alignment.
 	 */
 	skb_reserve(rd_info->skb, (unsigned long) rd_info->skb->data & 63);
-	rd_info->skb_dma = pci_map_single(vptr->pdev, rd_info->skb->data, vptr->rx_buf_sz, PCI_DMA_FROMDEVICE);
+	rd_info->skb_dma = pci_map_single(vptr->pdev, rd_info->skb->data,
+					vptr->rx.buf_sz, PCI_DMA_FROMDEVICE);
 
 	/*
 	 *	Fill in the descriptor to match
- 	 */
+	 */
 
 	*((u32 *) & (rd->rdesc0)) = 0;
-	rd->size = cpu_to_le16(vptr->rx_buf_sz) | RX_INTEN;
+	rd->size = cpu_to_le16(vptr->rx.buf_sz) | RX_INTEN;
 	rd->pa_low = cpu_to_le32(rd_info->skb_dma);
 	rd->pa_high = 0;
 	return 0;
@@ -1625,15 +1630,15 @@ static int velocity_tx_srv(struct velocity_info *vptr, u32 status)
 	struct velocity_td_info *tdinfo;
 	struct net_device_stats *stats = &vptr->stats;
 
-	for (qnum = 0; qnum < vptr->num_txq; qnum++) {
-		for (idx = vptr->td_tail[qnum]; vptr->td_used[qnum] > 0;
+	for (qnum = 0; qnum < vptr->tx.numq; qnum++) {
+		for (idx = vptr->tx.tail[qnum]; vptr->tx.used[qnum] > 0;
 			idx = (idx + 1) % vptr->options.numtx) {
 
 			/*
 			 *	Get Tx Descriptor
 			 */
-			td = &(vptr->td_rings[qnum][idx]);
-			tdinfo = &(vptr->td_infos[qnum][idx]);
+			td = &(vptr->tx.rings[qnum][idx]);
+			tdinfo = &(vptr->tx.infos[qnum][idx]);
 
 			if (td->tdesc0.len & OWNED_BY_NIC)
 				break;
@@ -1657,9 +1662,9 @@ static int velocity_tx_srv(struct velocity_info *vptr, u32 status)
 				stats->tx_bytes += tdinfo->skb->len;
 			}
 			velocity_free_tx_buf(vptr, tdinfo);
-			vptr->td_used[qnum]--;
+			vptr->tx.used[qnum]--;
 		}
-		vptr->td_tail[qnum] = idx;
+		vptr->tx.tail[qnum] = idx;
 
 		if (AVAIL_TD(vptr, qnum) < 1) {
 			full = 1;
@@ -1846,6 +1851,40 @@ static void velocity_free_tx_buf(struct velocity_info *vptr, struct velocity_td_
 	tdinfo->skb = NULL;
 }
 
+static int velocity_init_rings(struct velocity_info *vptr, int mtu)
+{
+	int ret;
+
+	velocity_set_rxbufsize(vptr, mtu);
+
+	ret = velocity_init_dma_rings(vptr);
+	if (ret < 0)
+		goto out;
+
+	ret = velocity_init_rd_ring(vptr);
+	if (ret < 0)
+		goto err_free_dma_rings_0;
+
+	ret = velocity_init_td_ring(vptr);
+	if (ret < 0)
+		goto err_free_rd_ring_1;
+out:
+	return ret;
+
+err_free_rd_ring_1:
+	velocity_free_rd_ring(vptr);
+err_free_dma_rings_0:
+	velocity_free_dma_rings(vptr);
+	goto out;
+}
+
+static void velocity_free_rings(struct velocity_info *vptr)
+{
+	velocity_free_td_ring(vptr);
+	velocity_free_rd_ring(vptr);
+	velocity_free_dma_rings(vptr);
+}
+
 /**
  *	velocity_open		-	interface activation callback
  *	@dev: network layer device to open
@@ -1862,20 +1901,10 @@ static int velocity_open(struct net_device *dev)
 	struct velocity_info *vptr = netdev_priv(dev);
 	int ret;
 
-	velocity_set_rxbufsize(vptr, dev->mtu);
-
-	ret = velocity_init_rings(vptr);
+	ret = velocity_init_rings(vptr, dev->mtu);
 	if (ret < 0)
 		goto out;
 
-	ret = velocity_init_rd_ring(vptr);
-	if (ret < 0)
-		goto err_free_desc_rings;
-
-	ret = velocity_init_td_ring(vptr);
-	if (ret < 0)
-		goto err_free_rd_ring;
-
 	/* Ensure chip is running */
 	pci_set_power_state(vptr->pdev, PCI_D0);
 
@@ -1888,7 +1917,8 @@ static int velocity_open(struct net_device *dev)
 	if (ret < 0) {
 		/* Power down the chip */
 		pci_set_power_state(vptr->pdev, PCI_D3hot);
-		goto err_free_td_ring;
+		velocity_free_rings(vptr);
+		goto out;
 	}
 
 	mac_enable_int(vptr->mac_regs);
@@ -1896,14 +1926,6 @@ static int velocity_open(struct net_device *dev)
 	vptr->flags |= VELOCITY_FLAGS_OPENED;
 out:
 	return ret;
-
-err_free_td_ring:
-	velocity_free_td_ring(vptr);
-err_free_rd_ring:
-	velocity_free_rd_ring(vptr);
-err_free_desc_rings:
-	velocity_free_rings(vptr);
-	goto out;
 }
 
 /**
@@ -1919,50 +1941,72 @@ err_free_desc_rings:
 static int velocity_change_mtu(struct net_device *dev, int new_mtu)
 {
 	struct velocity_info *vptr = netdev_priv(dev);
-	unsigned long flags;
-	int oldmtu = dev->mtu;
 	int ret = 0;
 
 	if ((new_mtu < VELOCITY_MIN_MTU) || new_mtu > (VELOCITY_MAX_MTU)) {
 		VELOCITY_PRT(MSG_LEVEL_ERR, KERN_NOTICE "%s: Invalid MTU.\n",
 				vptr->dev->name);
-		return -EINVAL;
+		ret = -EINVAL;
+		goto out_0;
 	}
 
 	if (!netif_running(dev)) {
 		dev->mtu = new_mtu;
-		return 0;
+		goto out_0;
 	}
 
-	if (new_mtu != oldmtu) {
+	if (dev->mtu != new_mtu) {
+		struct velocity_info *tmp_vptr;
+		unsigned long flags;
+		struct rx_info rx;
+		struct tx_info tx;
+
+		tmp_vptr = kzalloc(sizeof(*tmp_vptr), GFP_KERNEL);
+		if (!tmp_vptr) {
+			ret = -ENOMEM;
+			goto out_0;
+		}
+
+		tmp_vptr->dev = dev;
+		tmp_vptr->pdev = vptr->pdev;
+		tmp_vptr->options = vptr->options;
+		tmp_vptr->tx.numq = vptr->tx.numq;
+
+		ret = velocity_init_rings(tmp_vptr, new_mtu);
+		if (ret < 0)
+			goto out_free_tmp_vptr_1;
+
 		spin_lock_irqsave(&vptr->lock, flags);
 
 		netif_stop_queue(dev);
 		velocity_shutdown(vptr);
 
-		velocity_free_td_ring(vptr);
-		velocity_free_rd_ring(vptr);
+		rx = vptr->rx;
+		tx = vptr->tx;
 
-		dev->mtu = new_mtu;
+		vptr->rx = tmp_vptr->rx;
+		vptr->tx = tmp_vptr->tx;
 
-		velocity_set_rxbufsize(vptr, new_mtu);
+		tmp_vptr->rx = rx;
+		tmp_vptr->tx = tx;
 
-		ret = velocity_init_rd_ring(vptr);
-		if (ret < 0)
-			goto out_unlock;
+		dev->mtu = new_mtu;
 
-		ret = velocity_init_td_ring(vptr);
-		if (ret < 0)
-			goto out_unlock;
+		velocity_give_many_rx_descs(vptr);
 
 		velocity_init_registers(vptr, VELOCITY_INIT_COLD);
 
 		mac_enable_int(vptr->mac_regs);
 		netif_start_queue(dev);
-out_unlock:
+
 		spin_unlock_irqrestore(&vptr->lock, flags);
-	}
 
+		velocity_free_rings(tmp_vptr);
+
+out_free_tmp_vptr_1:
+		kfree(tmp_vptr);
+	}
+out_0:
 	return ret;
 }
 
@@ -2008,9 +2052,6 @@ static int velocity_close(struct net_device *dev)
 	/* Power down the chip */
 	pci_set_power_state(vptr->pdev, PCI_D3hot);
 
-	/* Free the resources */
-	velocity_free_td_ring(vptr);
-	velocity_free_rd_ring(vptr);
 	velocity_free_rings(vptr);
 
 	vptr->flags &= (~VELOCITY_FLAGS_OPENED);
@@ -2056,9 +2097,9 @@ static int velocity_xmit(struct sk_buff *skb, struct net_device *dev)
 
 	spin_lock_irqsave(&vptr->lock, flags);
 
-	index = vptr->td_curr[qnum];
-	td_ptr = &(vptr->td_rings[qnum][index]);
-	tdinfo = &(vptr->td_infos[qnum][index]);
+	index = vptr->tx.curr[qnum];
+	td_ptr = &(vptr->tx.rings[qnum][index]);
+	tdinfo = &(vptr->tx.infos[qnum][index]);
 
 	td_ptr->tdesc1.TCR = TCR0_TIC;
 	td_ptr->td_buf[0].size &= ~TD_QUEUE;
@@ -2071,9 +2112,9 @@ static int velocity_xmit(struct sk_buff *skb, struct net_device *dev)
 			skb_copy_from_linear_data(skb, tdinfo->buf, skb->len);
 			tdinfo->skb_dma[0] = tdinfo->buf_dma;
 			td_ptr->tdesc0.len = len;
-			td_ptr->td_buf[0].pa_low = cpu_to_le32(tdinfo->skb_dma[0]);
-			td_ptr->td_buf[0].pa_high = 0;
-			td_ptr->td_buf[0].size = len;	/* queue is 0 anyway */
+			td_ptr->tx.buf[0].pa_low = cpu_to_le32(tdinfo->skb_dma[0]);
+			td_ptr->tx.buf[0].pa_high = 0;
+			td_ptr->tx.buf[0].size = len;	/* queue is 0 anyway */
 			tdinfo->nskb_dma = 1;
 		} else {
 			int i = 0;
@@ -2084,9 +2125,9 @@ static int velocity_xmit(struct sk_buff *skb, struct net_device *dev)
 			td_ptr->tdesc0.len = len;
 
 			/* FIXME: support 48bit DMA later */
-			td_ptr->td_buf[i].pa_low = cpu_to_le32(tdinfo->skb_dma);
-			td_ptr->td_buf[i].pa_high = 0;
-			td_ptr->td_buf[i].size = cpu_to_le16(skb_headlen(skb));
+			td_ptr->tx.buf[i].pa_low = cpu_to_le32(tdinfo->skb_dma);
+			td_ptr->tx.buf[i].pa_high = 0;
+			td_ptr->tx.buf[i].size = cpu_to_le16(skb_headlen(skb));
 
 			for (i = 0; i < nfrags; i++) {
 				skb_frag_t *frag = &skb_shinfo(skb)->frags[i];
@@ -2094,9 +2135,9 @@ static int velocity_xmit(struct sk_buff *skb, struct net_device *dev)
 
 				tdinfo->skb_dma[i + 1] = pci_map_single(vptr->pdev, addr, frag->size, PCI_DMA_TODEVICE);
 
-				td_ptr->td_buf[i + 1].pa_low = cpu_to_le32(tdinfo->skb_dma[i + 1]);
-				td_ptr->td_buf[i + 1].pa_high = 0;
-				td_ptr->td_buf[i + 1].size = cpu_to_le16(frag->size);
+				td_ptr->tx.buf[i + 1].pa_low = cpu_to_le32(tdinfo->skb_dma[i + 1]);
+				td_ptr->tx.buf[i + 1].pa_high = 0;
+				td_ptr->tx.buf[i + 1].size = cpu_to_le16(frag->size);
 			}
 			tdinfo->nskb_dma = i - 1;
 		}
@@ -2142,13 +2183,13 @@ static int velocity_xmit(struct sk_buff *skb, struct net_device *dev)
 		if (prev < 0)
 			prev = vptr->options.numtx - 1;
 		td_ptr->tdesc0.len |= OWNED_BY_NIC;
-		vptr->td_used[qnum]++;
-		vptr->td_curr[qnum] = (index + 1) % vptr->options.numtx;
+		vptr->tx.used[qnum]++;
+		vptr->tx.curr[qnum] = (index + 1) % vptr->options.numtx;
 
 		if (AVAIL_TD(vptr, qnum) < 1)
 			netif_stop_queue(dev);
 
-		td_ptr = &(vptr->td_rings[qnum][prev]);
+		td_ptr = &(vptr->tx.rings[qnum][prev]);
 		td_ptr->td_buf[0].size |= TD_QUEUE;
 		mac_tx_queue_wake(vptr->mac_regs, qnum);
 	}
@@ -3405,8 +3446,8 @@ static int velocity_resume(struct pci_dev *pdev)
 
 	velocity_tx_srv(vptr, 0);
 
-	for (i = 0; i < vptr->num_txq; i++) {
-		if (vptr->td_used[i]) {
+	for (i = 0; i < vptr->tx.numq; i++) {
+		if (vptr->tx.used[i]) {
 			mac_tx_queue_wake(vptr->mac_regs, i);
 		}
 	}
diff --git a/drivers/net/via-velocity.h b/drivers/net/via-velocity.h
index 86446147284c..1b95b04c9257 100644
--- a/drivers/net/via-velocity.h
+++ b/drivers/net/via-velocity.h
@@ -1494,6 +1494,10 @@ struct velocity_opt {
 	u32 flags;
 };
 
+#define AVAIL_TD(p,q)   ((p)->options.numtx-((p)->tx.used[(q)]))
+
+#define GET_RD_BY_IDX(vptr, idx)   (vptr->rd_ring[idx])
+
 struct velocity_info {
 	struct list_head list;
 
@@ -1501,9 +1505,6 @@ struct velocity_info {
 	struct net_device *dev;
 	struct net_device_stats stats;
 
-	dma_addr_t rd_pool_dma;
-	dma_addr_t td_pool_dma[TX_QUEUE_NO];
-
 	struct vlan_group    *vlgrp;
 	u8 ip_addr[4];
 	enum chip_type chip_id;
@@ -1512,25 +1513,29 @@ struct velocity_info {
 	unsigned long memaddr;
 	unsigned long ioaddr;
 
-	u8 rev_id;
-
-#define AVAIL_TD(p,q)   ((p)->options.numtx-((p)->td_used[(q)]))
+	struct tx_info {
+		int numq;
+
+		/* FIXME: the locality of the data seems rather poor. */
+		int used[TX_QUEUE_NO];
+		int curr[TX_QUEUE_NO];
+		int tail[TX_QUEUE_NO];
+		struct tx_desc *rings[TX_QUEUE_NO];
+		struct velocity_td_info *infos[TX_QUEUE_NO];
+		dma_addr_t pool_dma[TX_QUEUE_NO];
+	} tx;
+
+	struct rx_info {
+		int buf_sz;
+
+		int dirty;
+		int curr;
+		u32 filled;
+		struct rx_desc *ring;
+		struct velocity_rd_info *info;	/* It's an array */
+		dma_addr_t pool_dma;
+	} rx;
 
-	int num_txq;
-
-	volatile int td_used[TX_QUEUE_NO];
-	int td_curr[TX_QUEUE_NO];
-	int td_tail[TX_QUEUE_NO];
-	struct tx_desc *td_rings[TX_QUEUE_NO];
-	struct velocity_td_info *td_infos[TX_QUEUE_NO];
-
-	int rd_curr;
-	int rd_dirty;
-	u32 rd_filled;
-	struct rx_desc *rd_ring;
-	struct velocity_rd_info *rd_info;	/* It's an array */
-
-#define GET_RD_BY_IDX(vptr, idx)   (vptr->rd_ring[idx])
 	u32 mib_counter[MAX_HW_MIB_COUNTER];
 	struct velocity_opt options;
 
@@ -1538,7 +1543,6 @@ struct velocity_info {
 
 	u32 flags;
 
-	int rx_buf_sz;
 	u32 mii_status;
 	u32 phy_id;
 	int multicast_limit;
@@ -1554,8 +1558,8 @@ struct velocity_info {
 	struct velocity_context context;
 
 	u32 ticks;
-	u32 rx_bytes;
 
+	u8 rev_id;
 };
 
 /**
diff --git a/drivers/net/virtio_net.c b/drivers/net/virtio_net.c
index c28d7cb2035b..0196a0df9021 100644
--- a/drivers/net/virtio_net.c
+++ b/drivers/net/virtio_net.c
@@ -19,6 +19,7 @@
 //#define DEBUG
 #include <linux/netdevice.h>
 #include <linux/etherdevice.h>
+#include <linux/ethtool.h>
 #include <linux/module.h>
 #include <linux/virtio.h>
 #include <linux/virtio_net.h>
@@ -54,9 +55,15 @@ struct virtnet_info
 	struct tasklet_struct tasklet;
 	bool free_in_tasklet;
 
+	/* I like... big packets and I cannot lie! */
+	bool big_packets;
+
 	/* Receive & send queues. */
 	struct sk_buff_head recv;
 	struct sk_buff_head send;
+
+	/* Chain pages by the private ptr. */
+	struct page *pages;
 };
 
 static inline struct virtio_net_hdr *skb_vnet_hdr(struct sk_buff *skb)
@@ -69,6 +76,23 @@ static inline void vnet_hdr_to_sg(struct scatterlist *sg, struct sk_buff *skb)
 	sg_init_one(sg, skb_vnet_hdr(skb), sizeof(struct virtio_net_hdr));
 }
 
+static void give_a_page(struct virtnet_info *vi, struct page *page)
+{
+	page->private = (unsigned long)vi->pages;
+	vi->pages = page;
+}
+
+static struct page *get_a_page(struct virtnet_info *vi, gfp_t gfp_mask)
+{
+	struct page *p = vi->pages;
+
+	if (p)
+		vi->pages = (struct page *)p->private;
+	else
+		p = alloc_page(gfp_mask);
+	return p;
+}
+
 static void skb_xmit_done(struct virtqueue *svq)
 {
 	struct virtnet_info *vi = svq->vdev->priv;
@@ -88,6 +112,7 @@ static void receive_skb(struct net_device *dev, struct sk_buff *skb,
 			unsigned len)
 {
 	struct virtio_net_hdr *hdr = skb_vnet_hdr(skb);
+	int err;
 
 	if (unlikely(len < sizeof(struct virtio_net_hdr) + ETH_HLEN)) {
 		pr_debug("%s: short packet %i\n", dev->name, len);
@@ -95,10 +120,23 @@ static void receive_skb(struct net_device *dev, struct sk_buff *skb,
 		goto drop;
 	}
 	len -= sizeof(struct virtio_net_hdr);
-	BUG_ON(len > MAX_PACKET_LEN);
 
-	skb_trim(skb, len);
+	if (len <= MAX_PACKET_LEN) {
+		unsigned int i;
 
+		for (i = 0; i < skb_shinfo(skb)->nr_frags; i++)
+			give_a_page(dev->priv, skb_shinfo(skb)->frags[i].page);
+		skb->data_len = 0;
+		skb_shinfo(skb)->nr_frags = 0;
+	}
+
+	err = pskb_trim(skb, len);
+	if (err) {
+		pr_debug("%s: pskb_trim failed %i %d\n", dev->name, len, err);
+		dev->stats.rx_dropped++;
+		goto drop;
+	}
+	skb->truesize += skb->data_len;
 	dev->stats.rx_bytes += skb->len;
 	dev->stats.rx_packets++;
 
@@ -160,7 +198,7 @@ static void try_fill_recv(struct virtnet_info *vi)
 {
 	struct sk_buff *skb;
 	struct scatterlist sg[2+MAX_SKB_FRAGS];
-	int num, err;
+	int num, err, i;
 
 	sg_init_table(sg, 2+MAX_SKB_FRAGS);
 	for (;;) {
@@ -170,6 +208,24 @@ static void try_fill_recv(struct virtnet_info *vi)
 
 		skb_put(skb, MAX_PACKET_LEN);
 		vnet_hdr_to_sg(sg, skb);
+
+		if (vi->big_packets) {
+			for (i = 0; i < MAX_SKB_FRAGS; i++) {
+				skb_frag_t *f = &skb_shinfo(skb)->frags[i];
+				f->page = get_a_page(vi, GFP_ATOMIC);
+				if (!f->page)
+					break;
+
+				f->page_offset = 0;
+				f->size = PAGE_SIZE;
+
+				skb->data_len += PAGE_SIZE;
+				skb->len += PAGE_SIZE;
+
+				skb_shinfo(skb)->nr_frags++;
+			}
+		}
+
 		num = skb_to_sgvec(skb, sg+1, 0, skb->len) + 1;
 		skb_queue_head(&vi->recv, skb);
 
@@ -335,16 +391,11 @@ again:
 	free_old_xmit_skbs(vi);
 
 	/* If we has a buffer left over from last time, send it now. */
-	if (unlikely(vi->last_xmit_skb)) {
-		if (xmit_skb(vi, vi->last_xmit_skb) != 0) {
-			/* Drop this skb: we only queue one. */
-			vi->dev->stats.tx_dropped++;
-			kfree_skb(skb);
-			skb = NULL;
-			goto stop_queue;
-		}
-		vi->last_xmit_skb = NULL;
-	}
+	if (unlikely(vi->last_xmit_skb) &&
+	    xmit_skb(vi, vi->last_xmit_skb) != 0)
+		goto stop_queue;
+
+	vi->last_xmit_skb = NULL;
 
 	/* Put new one in send queue and do transmit */
 	if (likely(skb)) {
@@ -370,6 +421,11 @@ stop_queue:
 		netif_start_queue(dev);
 		goto again;
 	}
+	if (skb) {
+		/* Drop this skb: we only queue one. */
+		vi->dev->stats.tx_dropped++;
+		kfree_skb(skb);
+	}
 	goto done;
 }
 
@@ -408,6 +464,22 @@ static int virtnet_close(struct net_device *dev)
 	return 0;
 }
 
+static int virtnet_set_tx_csum(struct net_device *dev, u32 data)
+{
+	struct virtnet_info *vi = netdev_priv(dev);
+	struct virtio_device *vdev = vi->vdev;
+
+	if (data && !virtio_has_feature(vdev, VIRTIO_NET_F_CSUM))
+		return -ENOSYS;
+
+	return ethtool_op_set_tx_hw_csum(dev, data);
+}
+
+static struct ethtool_ops virtnet_ethtool_ops = {
+	.set_tx_csum = virtnet_set_tx_csum,
+	.set_sg = ethtool_op_set_sg,
+};
+
 static int virtnet_probe(struct virtio_device *vdev)
 {
 	int err;
@@ -427,6 +499,7 @@ static int virtnet_probe(struct virtio_device *vdev)
 #ifdef CONFIG_NET_POLL_CONTROLLER
 	dev->poll_controller = virtnet_netpoll;
 #endif
+	SET_ETHTOOL_OPS(dev, &virtnet_ethtool_ops);
 	SET_NETDEV_DEV(dev, &vdev->dev);
 
 	/* Do we support "hardware" checksums? */
@@ -462,11 +535,18 @@ static int virtnet_probe(struct virtio_device *vdev)
 	vi->dev = dev;
 	vi->vdev = vdev;
 	vdev->priv = vi;
+	vi->pages = NULL;
 
 	/* If they give us a callback when all buffers are done, we don't need
 	 * the timer. */
 	vi->free_in_tasklet = virtio_has_feature(vdev,VIRTIO_F_NOTIFY_ON_EMPTY);
 
+	/* If we can receive ANY GSO packets, we must allocate large ones. */
+	if (virtio_has_feature(vdev, VIRTIO_NET_F_GUEST_TSO4)
+	    || virtio_has_feature(vdev, VIRTIO_NET_F_GUEST_TSO6)
+	    || virtio_has_feature(vdev, VIRTIO_NET_F_GUEST_ECN))
+		vi->big_packets = true;
+
 	/* We expect two virtqueues, receive then send. */
 	vi->rvq = vdev->config->find_vq(vdev, 0, skb_recv_done);
 	if (IS_ERR(vi->rvq)) {
@@ -541,6 +621,10 @@ static void virtnet_remove(struct virtio_device *vdev)
 	vdev->config->del_vq(vi->svq);
 	vdev->config->del_vq(vi->rvq);
 	unregister_netdev(vi->dev);
+
+	while (vi->pages)
+		__free_pages(get_a_page(vi, GFP_KERNEL), 0);
+
 	free_netdev(vi->dev);
 }
 
@@ -553,7 +637,9 @@ static unsigned int features[] = {
 	VIRTIO_NET_F_CSUM, VIRTIO_NET_F_GUEST_CSUM,
 	VIRTIO_NET_F_GSO, VIRTIO_NET_F_MAC,
 	VIRTIO_NET_F_HOST_TSO4, VIRTIO_NET_F_HOST_UFO, VIRTIO_NET_F_HOST_TSO6,
-	VIRTIO_NET_F_HOST_ECN, VIRTIO_F_NOTIFY_ON_EMPTY,
+	VIRTIO_NET_F_HOST_ECN, VIRTIO_NET_F_GUEST_TSO4, VIRTIO_NET_F_GUEST_TSO6,
+	VIRTIO_NET_F_GUEST_ECN, /* We don't yet handle UFO input. */
+	VIRTIO_F_NOTIFY_ON_EMPTY,
 };
 
 static struct virtio_driver virtio_net = {
diff --git a/drivers/net/wan/Kconfig b/drivers/net/wan/Kconfig
index 846be60e7821..2ae2ec40015d 100644
--- a/drivers/net/wan/Kconfig
+++ b/drivers/net/wan/Kconfig
@@ -25,7 +25,7 @@ if WAN
 # There is no way to detect a comtrol sv11 - force it modular for now.
 config HOSTESS_SV11
 	tristate "Comtrol Hostess SV-11 support"
-	depends on ISA && m && ISA_DMA_API && INET
+	depends on ISA && m && ISA_DMA_API && INET && HDLC
 	help
 	  Driver for Comtrol Hostess SV-11 network card which
 	  operates on low speed synchronous serial links at up to
@@ -37,7 +37,7 @@ config HOSTESS_SV11
 # The COSA/SRP driver has not been tested as non-modular yet.
 config COSA
 	tristate "COSA/SRP sync serial boards support"
-	depends on ISA && m && ISA_DMA_API
+	depends on ISA && m && ISA_DMA_API && HDLC
 	---help---
 	  Driver for COSA and SRP synchronous serial boards.
 
@@ -61,7 +61,7 @@ config COSA
 #
 config LANMEDIA
 	tristate "LanMedia Corp. SSI/V.35, T1/E1, HSSI, T3 boards"
-	depends on PCI && VIRT_TO_BUS
+	depends on PCI && VIRT_TO_BUS && HDLC
 	---help---
 	  Driver for the following Lan Media family of serial boards:
 
@@ -78,9 +78,8 @@ config LANMEDIA
 	  - LMC 5245 board connects directly to a T3 circuit saving the
 	  additional external hardware.
 
-	  To change setting such as syncPPP vs Cisco HDLC or clock source you
-	  will need lmcctl.  It is available at <ftp://ftp.lanmedia.com/>
-	  (broken link).
+	  To change setting such as clock source you will need lmcctl.
+	  It is available at <ftp://ftp.lanmedia.com/> (broken link).
 
 	  To compile this driver as a module, choose M here: the
 	  module will be called lmc.
@@ -88,7 +87,7 @@ config LANMEDIA
 # There is no way to detect a Sealevel board. Force it modular
 config SEALEVEL_4021
 	tristate "Sealevel Systems 4021 support"
-	depends on ISA && m && ISA_DMA_API && INET
+	depends on ISA && m && ISA_DMA_API && INET && HDLC
 	help
 	  This is a driver for the Sealevel Systems ACB 56 serial I/O adapter.
 
@@ -154,8 +153,6 @@ config HDLC_PPP
 	help
 	  Generic HDLC driver supporting PPP over WAN connections.
 
-	  It will be replaced by new PPP implementation in Linux 2.6.26.
-
 	  If unsure, say N.
 
 config HDLC_X25
diff --git a/drivers/net/wan/Makefile b/drivers/net/wan/Makefile
index d61fef36afc9..102549605d09 100644
--- a/drivers/net/wan/Makefile
+++ b/drivers/net/wan/Makefile
@@ -21,12 +21,11 @@ pc300-y				:= pc300_drv.o
 pc300-$(CONFIG_PC300_MLPPP)	+= pc300_tty.o
 pc300-objs			:= $(pc300-y)
 
-obj-$(CONFIG_HOSTESS_SV11)	+= z85230.o	syncppp.o	hostess_sv11.o
-obj-$(CONFIG_SEALEVEL_4021)	+= z85230.o	syncppp.o	sealevel.o
-obj-$(CONFIG_COSA)		+=		syncppp.o	cosa.o
-obj-$(CONFIG_FARSYNC)		+=		syncppp.o	farsync.o
-obj-$(CONFIG_DSCC4)             +=				dscc4.o
-obj-$(CONFIG_LANMEDIA)		+=		syncppp.o
+obj-$(CONFIG_HOSTESS_SV11)	+= z85230.o	hostess_sv11.o
+obj-$(CONFIG_SEALEVEL_4021)	+= z85230.o	sealevel.o
+obj-$(CONFIG_COSA)		+= cosa.o
+obj-$(CONFIG_FARSYNC)		+= farsync.o
+obj-$(CONFIG_DSCC4)             += dscc4.o
 obj-$(CONFIG_X25_ASY)		+= x25_asy.o
 
 obj-$(CONFIG_LANMEDIA)		+= lmc/
diff --git a/drivers/net/wan/cosa.c b/drivers/net/wan/cosa.c
index f7d3349dc3ec..f14051556c87 100644
--- a/drivers/net/wan/cosa.c
+++ b/drivers/net/wan/cosa.c
@@ -2,6 +2,7 @@
 
 /*
  *  Copyright (C) 1995-1997  Jan "Yenya" Kasprzak <kas@fi.muni.cz>
+ *  Generic HDLC port Copyright (C) 2008 Krzysztof Halasa <khc@pm.waw.pl>
  *
  *  This program is free software; you can redistribute it and/or modify
  *  it under the terms of the GNU General Public License as published by
@@ -54,7 +55,7 @@
  *
  * The Linux driver (unlike the present *BSD drivers :-) can work even
  * for the COSA and SRP in one computer and allows each channel to work
- * in one of the three modes (character device, Cisco HDLC, Sync PPP).
+ * in one of the two modes (character or network device).
  *
  * AUTHOR
  *
@@ -72,12 +73,6 @@
  * The Comtrol Hostess SV11 driver by Alan Cox
  * The Sync PPP/Cisco HDLC layer (syncppp.c) ported to Linux by Alan Cox
  */
-/*
- *     5/25/1999 : Marcelo Tosatti <marcelo@conectiva.com.br>
- *             fixed a deadlock in cosa_sppp_open
- */
-
-/* ---------- Headers, macros, data structures ---------- */
 
 #include <linux/module.h>
 #include <linux/kernel.h>
@@ -86,6 +81,7 @@
 #include <linux/fs.h>
 #include <linux/interrupt.h>
 #include <linux/delay.h>
+#include <linux/hdlc.h>
 #include <linux/errno.h>
 #include <linux/ioport.h>
 #include <linux/netdevice.h>
@@ -93,14 +89,12 @@
 #include <linux/mutex.h>
 #include <linux/device.h>
 #include <linux/smp_lock.h>
-
-#undef COSA_SLOW_IO	/* for testing purposes only */
-
 #include <asm/io.h>
 #include <asm/dma.h>
 #include <asm/byteorder.h>
 
-#include <net/syncppp.h>
+#undef COSA_SLOW_IO	/* for testing purposes only */
+
 #include "cosa.h"
 
 /* Maximum length of the identification string. */
@@ -112,7 +106,6 @@
 /* Per-channel data structure */
 
 struct channel_data {
-	void *if_ptr;	/* General purpose pointer (used by SPPP) */
 	int usage;	/* Usage count; >0 for chrdev, -1 for netdev */
 	int num;	/* Number of the channel */
 	struct cosa_data *cosa;	/* Pointer to the per-card structure */
@@ -136,10 +129,9 @@ struct channel_data {
 	wait_queue_head_t txwaitq, rxwaitq;
 	int tx_status, rx_status;
 
-	/* SPPP/HDLC device parts */
-	struct ppp_device pppdev;
+	/* generic HDLC device parts */
+	struct net_device *netdev;
 	struct sk_buff *rx_skb, *tx_skb;
-	struct net_device_stats stats;
 };
 
 /* cosa->firmware_status bits */
@@ -281,21 +273,19 @@ static int cosa_start_tx(struct channel_data *channel, char *buf, int size);
 static void cosa_kick(struct cosa_data *cosa);
 static int cosa_dma_able(struct channel_data *chan, char *buf, int data);
 
-/* SPPP/HDLC stuff */
-static void sppp_channel_init(struct channel_data *chan);
-static void sppp_channel_delete(struct channel_data *chan);
-static int cosa_sppp_open(struct net_device *d);
-static int cosa_sppp_close(struct net_device *d);
-static void cosa_sppp_timeout(struct net_device *d);
-static int cosa_sppp_tx(struct sk_buff *skb, struct net_device *d);
-static char *sppp_setup_rx(struct channel_data *channel, int size);
-static int sppp_rx_done(struct channel_data *channel);
-static int sppp_tx_done(struct channel_data *channel, int size);
-static int cosa_sppp_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd);
-static struct net_device_stats *cosa_net_stats(struct net_device *dev);
+/* Network device stuff */
+static int cosa_net_attach(struct net_device *dev, unsigned short encoding,
+			   unsigned short parity);
+static int cosa_net_open(struct net_device *d);
+static int cosa_net_close(struct net_device *d);
+static void cosa_net_timeout(struct net_device *d);
+static int cosa_net_tx(struct sk_buff *skb, struct net_device *d);
+static char *cosa_net_setup_rx(struct channel_data *channel, int size);
+static int cosa_net_rx_done(struct channel_data *channel);
+static int cosa_net_tx_done(struct channel_data *channel, int size);
+static int cosa_net_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd);
 
 /* Character device */
-static void chardev_channel_init(struct channel_data *chan);
 static char *chrdev_setup_rx(struct channel_data *channel, int size);
 static int chrdev_rx_done(struct channel_data *channel);
 static int chrdev_tx_done(struct channel_data *channel, int size);
@@ -357,17 +347,17 @@ static void debug_status_in(struct cosa_data *cosa, int status);
 static void debug_status_out(struct cosa_data *cosa, int status);
 #endif
 
-
+static inline struct channel_data* dev_to_chan(struct net_device *dev)
+{
+	return (struct channel_data *)dev_to_hdlc(dev)->priv;
+}
+
 /* ---------- Initialization stuff ---------- */
 
 static int __init cosa_init(void)
 {
 	int i, err = 0;
 
-	printk(KERN_INFO "cosa v1.08 (c) 1997-2000 Jan Kasprzak <kas@fi.muni.cz>\n");
-#ifdef CONFIG_SMP
-	printk(KERN_INFO "cosa: SMP found. Please mail any success/failure reports to the author.\n");
-#endif
 	if (cosa_major > 0) {
 		if (register_chrdev(cosa_major, "cosa", &cosa_fops)) {
 			printk(KERN_WARNING "cosa: unable to get major %d\n",
@@ -402,7 +392,7 @@ static int __init cosa_init(void)
 				      NULL, "cosa%d", i);
 	err = 0;
 	goto out;
-	
+
 out_chrdev:
 	unregister_chrdev(cosa_major, "cosa");
 out:
@@ -414,43 +404,29 @@ static void __exit cosa_exit(void)
 {
 	struct cosa_data *cosa;
 	int i;
-	printk(KERN_INFO "Unloading the cosa module\n");
 
-	for (i=0; i<nr_cards; i++)
+	for (i = 0; i < nr_cards; i++)
 		device_destroy(cosa_class, MKDEV(cosa_major, i));
 	class_destroy(cosa_class);
-	for (cosa=cosa_cards; nr_cards--; cosa++) {
+
+	for (cosa = cosa_cards; nr_cards--; cosa++) {
 		/* Clean up the per-channel data */
-		for (i=0; i<cosa->nchannels; i++) {
+		for (i = 0; i < cosa->nchannels; i++) {
 			/* Chardev driver has no alloc'd per-channel data */
-			sppp_channel_delete(cosa->chan+i);
+			unregister_hdlc_device(cosa->chan[i].netdev);
+			free_netdev(cosa->chan[i].netdev);
 		}
 		/* Clean up the per-card data */
 		kfree(cosa->chan);
 		kfree(cosa->bouncebuf);
 		free_irq(cosa->irq, cosa);
 		free_dma(cosa->dma);
-		release_region(cosa->datareg,is_8bit(cosa)?2:4);
+		release_region(cosa->datareg, is_8bit(cosa) ? 2 : 4);
 	}
 	unregister_chrdev(cosa_major, "cosa");
 }
 module_exit(cosa_exit);
 
-/*
- * This function should register all the net devices needed for the
- * single channel.
- */
-static __inline__ void channel_init(struct channel_data *chan)
-{
-	sprintf(chan->name, "cosa%dc%d", chan->cosa->num, chan->num);
-
-	/* Initialize the chardev data structures */
-	chardev_channel_init(chan);
-
-	/* Register the sppp interface */
-	sppp_channel_init(chan);
-}
-	
 static int cosa_probe(int base, int irq, int dma)
 {
 	struct cosa_data *cosa = cosa_cards+nr_cards;
@@ -576,13 +552,43 @@ static int cosa_probe(int base, int irq, int dma)
 	/* Initialize the per-channel data */
 	cosa->chan = kcalloc(cosa->nchannels, sizeof(struct channel_data), GFP_KERNEL);
 	if (!cosa->chan) {
-	        err = -ENOMEM;
+		err = -ENOMEM;
 		goto err_out3;
 	}
-	for (i=0; i<cosa->nchannels; i++) {
-		cosa->chan[i].cosa = cosa;
-		cosa->chan[i].num = i;
-		channel_init(cosa->chan+i);
+
+	for (i = 0; i < cosa->nchannels; i++) {
+		struct channel_data *chan = &cosa->chan[i];
+
+		chan->cosa = cosa;
+		chan->num = i;
+		sprintf(chan->name, "cosa%dc%d", chan->cosa->num, i);
+
+		/* Initialize the chardev data structures */
+		mutex_init(&chan->rlock);
+		init_MUTEX(&chan->wsem);
+
+		/* Register the network interface */
+		if (!(chan->netdev = alloc_hdlcdev(chan))) {
+			printk(KERN_WARNING "%s: alloc_hdlcdev failed.\n",
+			       chan->name);
+			goto err_hdlcdev;
+		}
+		dev_to_hdlc(chan->netdev)->attach = cosa_net_attach;
+		dev_to_hdlc(chan->netdev)->xmit = cosa_net_tx;
+		chan->netdev->open = cosa_net_open;
+		chan->netdev->stop = cosa_net_close;
+		chan->netdev->do_ioctl = cosa_net_ioctl;
+		chan->netdev->tx_timeout = cosa_net_timeout;
+		chan->netdev->watchdog_timeo = TX_TIMEOUT;
+		chan->netdev->base_addr = chan->cosa->datareg;
+		chan->netdev->irq = chan->cosa->irq;
+		chan->netdev->dma = chan->cosa->dma;
+		if (register_hdlc_device(chan->netdev)) {
+			printk(KERN_WARNING "%s: register_hdlc_device()"
+			       " failed.\n", chan->netdev->name);
+			free_netdev(chan->netdev);
+			goto err_hdlcdev;
+		}
 	}
 
 	printk (KERN_INFO "cosa%d: %s (%s at 0x%x irq %d dma %d), %d channels\n",
@@ -590,13 +596,20 @@ static int cosa_probe(int base, int irq, int dma)
 		cosa->datareg, cosa->irq, cosa->dma, cosa->nchannels);
 
 	return nr_cards++;
+
+err_hdlcdev:
+	while (i-- > 0) {
+		unregister_hdlc_device(cosa->chan[i].netdev);
+		free_netdev(cosa->chan[i].netdev);
+	}
+	kfree(cosa->chan);
 err_out3:
 	kfree(cosa->bouncebuf);
 err_out2:
 	free_dma(cosa->dma);
 err_out1:
 	free_irq(cosa->irq, cosa);
-err_out:	
+err_out:
 	release_region(cosa->datareg,is_8bit(cosa)?2:4);
 	printk(KERN_NOTICE "cosa%d: allocating resources failed\n",
 	       cosa->num);
@@ -604,54 +617,19 @@ err_out:
 }
 
 
-/*---------- SPPP/HDLC netdevice ---------- */
+/*---------- network device ---------- */
 
-static void cosa_setup(struct net_device *d)
+static int cosa_net_attach(struct net_device *dev, unsigned short encoding,
+			   unsigned short parity)
 {
-	d->open = cosa_sppp_open;
-	d->stop = cosa_sppp_close;
-	d->hard_start_xmit = cosa_sppp_tx;
-	d->do_ioctl = cosa_sppp_ioctl;
-	d->get_stats = cosa_net_stats;
-	d->tx_timeout = cosa_sppp_timeout;
-	d->watchdog_timeo = TX_TIMEOUT;
-}
-
-static void sppp_channel_init(struct channel_data *chan)
-{
-	struct net_device *d;
-	chan->if_ptr = &chan->pppdev;
-	d = alloc_netdev(0, chan->name, cosa_setup);
-	if (!d) {
-		printk(KERN_WARNING "%s: alloc_netdev failed.\n", chan->name);
-		return;
-	}
-	chan->pppdev.dev = d;
-	d->base_addr = chan->cosa->datareg;
-	d->irq = chan->cosa->irq;
-	d->dma = chan->cosa->dma;
-	d->ml_priv = chan;
-	sppp_attach(&chan->pppdev);
-	if (register_netdev(d)) {
-		printk(KERN_WARNING "%s: register_netdev failed.\n", d->name);
-		sppp_detach(d);
-		free_netdev(d);
-		chan->pppdev.dev = NULL;
-		return;
-	}
-}
-
-static void sppp_channel_delete(struct channel_data *chan)
-{
-	unregister_netdev(chan->pppdev.dev);
-	sppp_detach(chan->pppdev.dev);
-	free_netdev(chan->pppdev.dev);
-	chan->pppdev.dev = NULL;
+	if (encoding == ENCODING_NRZ && parity == PARITY_CRC16_PR1_CCITT)
+		return 0;
+	return -EINVAL;
 }
 
-static int cosa_sppp_open(struct net_device *d)
+static int cosa_net_open(struct net_device *dev)
 {
-	struct channel_data *chan = d->ml_priv;
+	struct channel_data *chan = dev_to_chan(dev);
 	int err;
 	unsigned long flags;
 
@@ -662,36 +640,35 @@ static int cosa_sppp_open(struct net_device *d)
 	}
 	spin_lock_irqsave(&chan->cosa->lock, flags);
 	if (chan->usage != 0) {
-		printk(KERN_WARNING "%s: sppp_open called with usage count %d\n",
-			chan->name, chan->usage);
+		printk(KERN_WARNING "%s: cosa_net_open called with usage count"
+		       " %d\n", chan->name, chan->usage);
 		spin_unlock_irqrestore(&chan->cosa->lock, flags);
 		return -EBUSY;
 	}
-	chan->setup_rx = sppp_setup_rx;
-	chan->tx_done = sppp_tx_done;
-	chan->rx_done = sppp_rx_done;
-	chan->usage=-1;
+	chan->setup_rx = cosa_net_setup_rx;
+	chan->tx_done = cosa_net_tx_done;
+	chan->rx_done = cosa_net_rx_done;
+	chan->usage = -1;
 	chan->cosa->usage++;
 	spin_unlock_irqrestore(&chan->cosa->lock, flags);
 
-	err = sppp_open(d);
+	err = hdlc_open(dev);
 	if (err) {
 		spin_lock_irqsave(&chan->cosa->lock, flags);
-		chan->usage=0;
+		chan->usage = 0;
 		chan->cosa->usage--;
-		
 		spin_unlock_irqrestore(&chan->cosa->lock, flags);
 		return err;
 	}
 
-	netif_start_queue(d);
+	netif_start_queue(dev);
 	cosa_enable_rx(chan);
 	return 0;
 }
 
-static int cosa_sppp_tx(struct sk_buff *skb, struct net_device *dev)
+static int cosa_net_tx(struct sk_buff *skb, struct net_device *dev)
 {
-	struct channel_data *chan = dev->ml_priv;
+	struct channel_data *chan = dev_to_chan(dev);
 
 	netif_stop_queue(dev);
 
@@ -700,16 +677,16 @@ static int cosa_sppp_tx(struct sk_buff *skb, struct net_device *dev)
 	return 0;
 }
 
-static void cosa_sppp_timeout(struct net_device *dev)
+static void cosa_net_timeout(struct net_device *dev)
 {
-	struct channel_data *chan = dev->ml_priv;
+	struct channel_data *chan = dev_to_chan(dev);
 
 	if (test_bit(RXBIT, &chan->cosa->rxtx)) {
-		chan->stats.rx_errors++;
-		chan->stats.rx_missed_errors++;
+		chan->netdev->stats.rx_errors++;
+		chan->netdev->stats.rx_missed_errors++;
 	} else {
-		chan->stats.tx_errors++;
-		chan->stats.tx_aborted_errors++;
+		chan->netdev->stats.tx_errors++;
+		chan->netdev->stats.tx_aborted_errors++;
 	}
 	cosa_kick(chan->cosa);
 	if (chan->tx_skb) {
@@ -719,13 +696,13 @@ static void cosa_sppp_timeout(struct net_device *dev)
 	netif_wake_queue(dev);
 }
 
-static int cosa_sppp_close(struct net_device *d)
+static int cosa_net_close(struct net_device *dev)
 {
-	struct channel_data *chan = d->ml_priv;
+	struct channel_data *chan = dev_to_chan(dev);
 	unsigned long flags;
 
-	netif_stop_queue(d);
-	sppp_close(d);
+	netif_stop_queue(dev);
+	hdlc_close(dev);
 	cosa_disable_rx(chan);
 	spin_lock_irqsave(&chan->cosa->lock, flags);
 	if (chan->rx_skb) {
@@ -736,13 +713,13 @@ static int cosa_sppp_close(struct net_device *d)
 		kfree_skb(chan->tx_skb);
 		chan->tx_skb = NULL;
 	}
-	chan->usage=0;
+	chan->usage = 0;
 	chan->cosa->usage--;
 	spin_unlock_irqrestore(&chan->cosa->lock, flags);
 	return 0;
 }
 
-static char *sppp_setup_rx(struct channel_data *chan, int size)
+static char *cosa_net_setup_rx(struct channel_data *chan, int size)
 {
 	/*
 	 * We can safely fall back to non-dma-able memory, because we have
@@ -754,66 +731,53 @@ static char *sppp_setup_rx(struct channel_data *chan, int size)
 	if (chan->rx_skb == NULL) {
 		printk(KERN_NOTICE "%s: Memory squeeze, dropping packet\n",
 			chan->name);
-		chan->stats.rx_dropped++;
+		chan->netdev->stats.rx_dropped++;
 		return NULL;
 	}
-	chan->pppdev.dev->trans_start = jiffies;
+	chan->netdev->trans_start = jiffies;
 	return skb_put(chan->rx_skb, size);
 }
 
-static int sppp_rx_done(struct channel_data *chan)
+static int cosa_net_rx_done(struct channel_data *chan)
 {
 	if (!chan->rx_skb) {
 		printk(KERN_WARNING "%s: rx_done with empty skb!\n",
 			chan->name);
-		chan->stats.rx_errors++;
-		chan->stats.rx_frame_errors++;
+		chan->netdev->stats.rx_errors++;
+		chan->netdev->stats.rx_frame_errors++;
 		return 0;
 	}
-	chan->rx_skb->protocol = htons(ETH_P_WAN_PPP);
-	chan->rx_skb->dev = chan->pppdev.dev;
+	chan->rx_skb->protocol = hdlc_type_trans(chan->rx_skb, chan->netdev);
+	chan->rx_skb->dev = chan->netdev;
 	skb_reset_mac_header(chan->rx_skb);
-	chan->stats.rx_packets++;
-	chan->stats.rx_bytes += chan->cosa->rxsize;
+	chan->netdev->stats.rx_packets++;
+	chan->netdev->stats.rx_bytes += chan->cosa->rxsize;
 	netif_rx(chan->rx_skb);
 	chan->rx_skb = NULL;
-	chan->pppdev.dev->last_rx = jiffies;
+	chan->netdev->last_rx = jiffies;
 	return 0;
 }
 
 /* ARGSUSED */
-static int sppp_tx_done(struct channel_data *chan, int size)
+static int cosa_net_tx_done(struct channel_data *chan, int size)
 {
 	if (!chan->tx_skb) {
 		printk(KERN_WARNING "%s: tx_done with empty skb!\n",
 			chan->name);
-		chan->stats.tx_errors++;
-		chan->stats.tx_aborted_errors++;
+		chan->netdev->stats.tx_errors++;
+		chan->netdev->stats.tx_aborted_errors++;
 		return 1;
 	}
 	dev_kfree_skb_irq(chan->tx_skb);
 	chan->tx_skb = NULL;
-	chan->stats.tx_packets++;
-	chan->stats.tx_bytes += size;
-	netif_wake_queue(chan->pppdev.dev);
+	chan->netdev->stats.tx_packets++;
+	chan->netdev->stats.tx_bytes += size;
+	netif_wake_queue(chan->netdev);
 	return 1;
 }
 
-static struct net_device_stats *cosa_net_stats(struct net_device *dev)
-{
-	struct channel_data *chan = dev->ml_priv;
-	return &chan->stats;
-}
-
-
 /*---------- Character device ---------- */
 
-static void chardev_channel_init(struct channel_data *chan)
-{
-	mutex_init(&chan->rlock);
-	init_MUTEX(&chan->wsem);
-}
-
 static ssize_t cosa_read(struct file *file,
 	char __user *buf, size_t count, loff_t *ppos)
 {
@@ -1223,16 +1187,15 @@ static int cosa_ioctl_common(struct cosa_data *cosa,
 	return -ENOIOCTLCMD;
 }
 
-static int cosa_sppp_ioctl(struct net_device *dev, struct ifreq *ifr,
-	int cmd)
+static int cosa_net_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
 {
 	int rv;
-	struct channel_data *chan = dev->ml_priv;
-	rv = cosa_ioctl_common(chan->cosa, chan, cmd, (unsigned long)ifr->ifr_data);
-	if (rv == -ENOIOCTLCMD) {
-		return sppp_do_ioctl(dev, ifr, cmd);
-	}
-	return rv;
+	struct channel_data *chan = dev_to_chan(dev);
+	rv = cosa_ioctl_common(chan->cosa, chan, cmd,
+			       (unsigned long)ifr->ifr_data);
+	if (rv != -ENOIOCTLCMD)
+		return rv;
+	return hdlc_ioctl(dev, ifr, cmd);
 }
 
 static int cosa_chardev_ioctl(struct inode *inode, struct file *file,
diff --git a/drivers/net/wan/dscc4.c b/drivers/net/wan/dscc4.c
index 50ef5b4efd6d..f5d55ad02267 100644
--- a/drivers/net/wan/dscc4.c
+++ b/drivers/net/wan/dscc4.c
@@ -103,7 +103,6 @@
 #include <linux/netdevice.h>
 #include <linux/skbuff.h>
 #include <linux/delay.h>
-#include <net/syncppp.h>
 #include <linux/hdlc.h>
 #include <linux/mutex.h>
 
diff --git a/drivers/net/wan/farsync.c b/drivers/net/wan/farsync.c
index 754f00809e3e..9557ad078ab8 100644
--- a/drivers/net/wan/farsync.c
+++ b/drivers/net/wan/farsync.c
@@ -47,10 +47,7 @@ MODULE_LICENSE("GPL");
 /*      Default parameters for the link
  */
 #define FST_TX_QUEUE_LEN        100	/* At 8Mbps a longer queue length is
-					 * useful, the syncppp module forces
-					 * this down assuming a slower line I
-					 * guess.
-					 */
+					 * useful */
 #define FST_TXQ_DEPTH           16	/* This one is for the buffering
 					 * of frames on the way down to the card
 					 * so that we can keep the card busy
diff --git a/drivers/net/wan/farsync.h b/drivers/net/wan/farsync.h
index d871dafa87a1..6b27e7c3d449 100644
--- a/drivers/net/wan/farsync.h
+++ b/drivers/net/wan/farsync.h
@@ -54,9 +54,6 @@
 
 
 /*      Ioctl call command values
- *
- *      The first three private ioctls are used by the sync-PPP module,
- *      allowing a little room for expansion we start our numbering at 10.
  */
 #define FSTWRITE        (SIOCDEVPRIVATE+10)
 #define FSTCPURESET     (SIOCDEVPRIVATE+11)
@@ -202,9 +199,6 @@ struct fstioc_info {
 #define J1              7
 
 /* "proto" */
-#define FST_HDLC        1               /* Cisco compatible HDLC */
-#define FST_PPP         2               /* Sync PPP */
-#define FST_MONITOR     3               /* Monitor only (raw packet reception) */
 #define FST_RAW         4               /* Two way raw packets */
 #define FST_GEN_HDLC    5               /* Using "Generic HDLC" module */
 
diff --git a/drivers/net/wan/hdlc.c b/drivers/net/wan/hdlc.c
index e3a536477c7e..1f2a140c9f7c 100644
--- a/drivers/net/wan/hdlc.c
+++ b/drivers/net/wan/hdlc.c
@@ -22,20 +22,19 @@
  * - proto->start() and stop() are called with spin_lock_irq held.
  */
 
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/slab.h>
-#include <linux/poll.h>
 #include <linux/errno.h>
+#include <linux/hdlc.h>
 #include <linux/if_arp.h>
+#include <linux/inetdevice.h>
 #include <linux/init.h>
-#include <linux/skbuff.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/notifier.h>
 #include <linux/pkt_sched.h>
-#include <linux/inetdevice.h>
-#include <linux/lapb.h>
+#include <linux/poll.h>
 #include <linux/rtnetlink.h>
-#include <linux/notifier.h>
-#include <linux/hdlc.h>
+#include <linux/skbuff.h>
+#include <linux/slab.h>
 #include <net/net_namespace.h>
 
 
@@ -109,7 +108,7 @@ static int hdlc_device_event(struct notifier_block *this, unsigned long event,
 
 	if (dev->get_stats != hdlc_get_stats)
 		return NOTIFY_DONE; /* not an HDLC device */
- 
+
 	if (event != NETDEV_CHANGE)
 		return NOTIFY_DONE; /* Only interrested in carrier changes */
 
@@ -357,7 +356,7 @@ static struct packet_type hdlc_packet_type = {
 
 
 static struct notifier_block hdlc_notifier = {
-        .notifier_call = hdlc_device_event,
+	.notifier_call = hdlc_device_event,
 };
 
 
@@ -367,8 +366,8 @@ static int __init hdlc_module_init(void)
 
 	printk(KERN_INFO "%s\n", version);
 	if ((result = register_netdevice_notifier(&hdlc_notifier)) != 0)
-                return result;
-        dev_add_pack(&hdlc_packet_type);
+		return result;
+	dev_add_pack(&hdlc_packet_type);
 	return 0;
 }
 
diff --git a/drivers/net/wan/hdlc_cisco.c b/drivers/net/wan/hdlc_cisco.c
index 849819c2552d..44e64b15dbd1 100644
--- a/drivers/net/wan/hdlc_cisco.c
+++ b/drivers/net/wan/hdlc_cisco.c
@@ -9,19 +9,18 @@
  * as published by the Free Software Foundation.
  */
 
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/slab.h>
-#include <linux/poll.h>
 #include <linux/errno.h>
+#include <linux/hdlc.h>
 #include <linux/if_arp.h>
+#include <linux/inetdevice.h>
 #include <linux/init.h>
-#include <linux/skbuff.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
 #include <linux/pkt_sched.h>
-#include <linux/inetdevice.h>
-#include <linux/lapb.h>
+#include <linux/poll.h>
 #include <linux/rtnetlink.h>
-#include <linux/hdlc.h>
+#include <linux/skbuff.h>
+#include <linux/slab.h>
 
 #undef DEBUG_HARD_HEADER
 
@@ -68,9 +67,9 @@ struct cisco_state {
 static int cisco_ioctl(struct net_device *dev, struct ifreq *ifr);
 
 
-static inline struct cisco_state * state(hdlc_device *hdlc)
+static inline struct cisco_state* state(hdlc_device *hdlc)
 {
-	return(struct cisco_state *)(hdlc->state);
+	return (struct cisco_state *)hdlc->state;
 }
 
 
@@ -172,7 +171,7 @@ static int cisco_rx(struct sk_buff *skb)
 	    data->address != CISCO_UNICAST)
 		goto rx_error;
 
-	switch(ntohs(data->protocol)) {
+	switch (ntohs(data->protocol)) {
 	case CISCO_SYS_INFO:
 		/* Packet is not needed, drop it. */
 		dev_kfree_skb_any(skb);
@@ -336,7 +335,7 @@ static struct hdlc_proto proto = {
 static const struct header_ops cisco_header_ops = {
 	.create = cisco_hard_header,
 };
- 
+
 static int cisco_ioctl(struct net_device *dev, struct ifreq *ifr)
 {
 	cisco_proto __user *cisco_s = ifr->ifr_settings.ifs_ifsu.cisco;
@@ -359,10 +358,10 @@ static int cisco_ioctl(struct net_device *dev, struct ifreq *ifr)
 		return 0;
 
 	case IF_PROTO_CISCO:
-		if(!capable(CAP_NET_ADMIN))
+		if (!capable(CAP_NET_ADMIN))
 			return -EPERM;
 
-		if(dev->flags & IFF_UP)
+		if (dev->flags & IFF_UP)
 			return -EBUSY;
 
 		if (copy_from_user(&new_settings, cisco_s, size))
@@ -372,7 +371,7 @@ static int cisco_ioctl(struct net_device *dev, struct ifreq *ifr)
 		    new_settings.timeout < 2)
 			return -EINVAL;
 
-		result=hdlc->attach(dev, ENCODING_NRZ,PARITY_CRC16_PR1_CCITT);
+		result = hdlc->attach(dev, ENCODING_NRZ,PARITY_CRC16_PR1_CCITT);
 		if (result)
 			return result;
 
diff --git a/drivers/net/wan/hdlc_fr.c b/drivers/net/wan/hdlc_fr.c
index 62e93dac6b13..d3d5055741ad 100644
--- a/drivers/net/wan/hdlc_fr.c
+++ b/drivers/net/wan/hdlc_fr.c
@@ -33,20 +33,19 @@
 
 */
 
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/slab.h>
-#include <linux/poll.h>
 #include <linux/errno.h>
+#include <linux/etherdevice.h>
+#include <linux/hdlc.h>
 #include <linux/if_arp.h>
+#include <linux/inetdevice.h>
 #include <linux/init.h>
-#include <linux/skbuff.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
 #include <linux/pkt_sched.h>
-#include <linux/inetdevice.h>
-#include <linux/lapb.h>
+#include <linux/poll.h>
 #include <linux/rtnetlink.h>
-#include <linux/etherdevice.h>
-#include <linux/hdlc.h>
+#include <linux/skbuff.h>
+#include <linux/slab.h>
 
 #undef DEBUG_PKT
 #undef DEBUG_ECN
@@ -96,7 +95,7 @@ typedef struct {
 	unsigned ea1:	1;
 	unsigned cr:	1;
 	unsigned dlcih:	6;
-  
+
 	unsigned ea2:	1;
 	unsigned de:	1;
 	unsigned becn:	1;
diff --git a/drivers/net/wan/hdlc_ppp.c b/drivers/net/wan/hdlc_ppp.c
index 00308337928e..4efe9e6d32d5 100644
--- a/drivers/net/wan/hdlc_ppp.c
+++ b/drivers/net/wan/hdlc_ppp.c
@@ -9,19 +9,18 @@
  * as published by the Free Software Foundation.
  */
 
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/slab.h>
-#include <linux/poll.h>
 #include <linux/errno.h>
+#include <linux/hdlc.h>
 #include <linux/if_arp.h>
+#include <linux/inetdevice.h>
 #include <linux/init.h>
-#include <linux/skbuff.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
 #include <linux/pkt_sched.h>
-#include <linux/inetdevice.h>
-#include <linux/lapb.h>
+#include <linux/poll.h>
 #include <linux/rtnetlink.h>
-#include <linux/hdlc.h>
+#include <linux/skbuff.h>
+#include <linux/slab.h>
 #include <net/syncppp.h>
 
 struct ppp_state {
diff --git a/drivers/net/wan/hdlc_raw.c b/drivers/net/wan/hdlc_raw.c
index bbbb819d764c..8612311748f4 100644
--- a/drivers/net/wan/hdlc_raw.c
+++ b/drivers/net/wan/hdlc_raw.c
@@ -9,19 +9,18 @@
  * as published by the Free Software Foundation.
  */
 
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/slab.h>
-#include <linux/poll.h>
 #include <linux/errno.h>
+#include <linux/hdlc.h>
 #include <linux/if_arp.h>
+#include <linux/inetdevice.h>
 #include <linux/init.h>
-#include <linux/skbuff.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
 #include <linux/pkt_sched.h>
-#include <linux/inetdevice.h>
-#include <linux/lapb.h>
+#include <linux/poll.h>
 #include <linux/rtnetlink.h>
-#include <linux/hdlc.h>
+#include <linux/skbuff.h>
+#include <linux/slab.h>
 
 
 static int raw_ioctl(struct net_device *dev, struct ifreq *ifr);
diff --git a/drivers/net/wan/hdlc_raw_eth.c b/drivers/net/wan/hdlc_raw_eth.c
index 26dee600506f..a13fc3207520 100644
--- a/drivers/net/wan/hdlc_raw_eth.c
+++ b/drivers/net/wan/hdlc_raw_eth.c
@@ -9,20 +9,19 @@
  * as published by the Free Software Foundation.
  */
 
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/slab.h>
-#include <linux/poll.h>
 #include <linux/errno.h>
+#include <linux/etherdevice.h>
+#include <linux/hdlc.h>
 #include <linux/if_arp.h>
+#include <linux/inetdevice.h>
 #include <linux/init.h>
-#include <linux/skbuff.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
 #include <linux/pkt_sched.h>
-#include <linux/inetdevice.h>
-#include <linux/lapb.h>
+#include <linux/poll.h>
 #include <linux/rtnetlink.h>
-#include <linux/etherdevice.h>
-#include <linux/hdlc.h>
+#include <linux/skbuff.h>
+#include <linux/slab.h>
 
 static int raw_eth_ioctl(struct net_device *dev, struct ifreq *ifr);
 
diff --git a/drivers/net/wan/hdlc_x25.c b/drivers/net/wan/hdlc_x25.c
index e808720030ef..8b7e5d2e2ac9 100644
--- a/drivers/net/wan/hdlc_x25.c
+++ b/drivers/net/wan/hdlc_x25.c
@@ -9,20 +9,19 @@
  * as published by the Free Software Foundation.
  */
 
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/slab.h>
-#include <linux/poll.h>
 #include <linux/errno.h>
+#include <linux/hdlc.h>
 #include <linux/if_arp.h>
-#include <linux/init.h>
-#include <linux/skbuff.h>
-#include <linux/pkt_sched.h>
 #include <linux/inetdevice.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
 #include <linux/lapb.h>
+#include <linux/module.h>
+#include <linux/pkt_sched.h>
+#include <linux/poll.h>
 #include <linux/rtnetlink.h>
-#include <linux/hdlc.h>
-
+#include <linux/skbuff.h>
+#include <linux/slab.h>
 #include <net/x25device.h>
 
 static int x25_ioctl(struct net_device *dev, struct ifreq *ifr);
diff --git a/drivers/net/wan/hostess_sv11.c b/drivers/net/wan/hostess_sv11.c
index f3065d3473fd..e299313f828a 100644
--- a/drivers/net/wan/hostess_sv11.c
+++ b/drivers/net/wan/hostess_sv11.c
@@ -16,6 +16,8 @@
  *	touching control registers.
  *
  *	Port B isnt wired (why - beats me)
+ *
+ *	Generic HDLC port Copyright (C) 2008 Krzysztof Halasa <khc@pm.waw.pl>
  */
 
 #include <linux/module.h>
@@ -26,6 +28,7 @@
 #include <linux/netdevice.h>
 #include <linux/if_arp.h>
 #include <linux/delay.h>
+#include <linux/hdlc.h>
 #include <linux/ioport.h>
 #include <net/arp.h>
 
@@ -33,34 +36,31 @@
 #include <asm/io.h>
 #include <asm/dma.h>
 #include <asm/byteorder.h>
-#include <net/syncppp.h>
 #include "z85230.h"
 
 static int dma;
 
-struct sv11_device
-{
-	void *if_ptr;	/* General purpose pointer (used by SPPP) */
-	struct z8530_dev sync;
-	struct ppp_device netdev;
-};
-
 /*
  *	Network driver support routines
  */
 
+static inline struct z8530_dev* dev_to_sv(struct net_device *dev)
+{
+	return (struct z8530_dev *)dev_to_hdlc(dev)->priv;
+}
+
 /*
- *	Frame receive. Simple for our card as we do sync ppp and there
+ *	Frame receive. Simple for our card as we do HDLC and there
  *	is no funny garbage involved
  */
- 
+
 static void hostess_input(struct z8530_channel *c, struct sk_buff *skb)
 {
 	/* Drop the CRC - it's not a good idea to try and negotiate it ;) */
-	skb_trim(skb, skb->len-2);
-	skb->protocol=__constant_htons(ETH_P_WAN_PPP);
+	skb_trim(skb, skb->len - 2);
+	skb->protocol = hdlc_type_trans(skb, c->netdevice);
 	skb_reset_mac_header(skb);
-	skb->dev=c->netdevice;
+	skb->dev = c->netdevice;
 	/*
 	 *	Send it to the PPP layer. We don't have time to process
 	 *	it right now.
@@ -68,56 +68,51 @@ static void hostess_input(struct z8530_channel *c, struct sk_buff *skb)
 	netif_rx(skb);
 	c->netdevice->last_rx = jiffies;
 }
- 
+
 /*
  *	We've been placed in the UP state
- */ 
- 
+ */
+
 static int hostess_open(struct net_device *d)
 {
-	struct sv11_device *sv11=d->ml_priv;
+	struct z8530_dev *sv11 = dev_to_sv(d);
 	int err = -1;
-	
+
 	/*
 	 *	Link layer up
 	 */
-	switch(dma)
-	{
+	switch (dma) {
 		case 0:
-			err=z8530_sync_open(d, &sv11->sync.chanA);
+			err = z8530_sync_open(d, &sv11->chanA);
 			break;
 		case 1:
-			err=z8530_sync_dma_open(d, &sv11->sync.chanA);
+			err = z8530_sync_dma_open(d, &sv11->chanA);
 			break;
 		case 2:
-			err=z8530_sync_txdma_open(d, &sv11->sync.chanA);
+			err = z8530_sync_txdma_open(d, &sv11->chanA);
 			break;
 	}
-	
-	if(err)
+
+	if (err)
 		return err;
-	/*
-	 *	Begin PPP
-	 */
-	err=sppp_open(d);
-	if(err)
-	{
-		switch(dma)
-		{
+
+	err = hdlc_open(d);
+	if (err) {
+		switch (dma) {
 			case 0:
-				z8530_sync_close(d, &sv11->sync.chanA);
+				z8530_sync_close(d, &sv11->chanA);
 				break;
 			case 1:
-				z8530_sync_dma_close(d, &sv11->sync.chanA);
+				z8530_sync_dma_close(d, &sv11->chanA);
 				break;
 			case 2:
-				z8530_sync_txdma_close(d, &sv11->sync.chanA);
+				z8530_sync_txdma_close(d, &sv11->chanA);
 				break;
-		}				
+		}
 		return err;
 	}
-	sv11->sync.chanA.rx_function=hostess_input;
-	
+	sv11->chanA.rx_function = hostess_input;
+
 	/*
 	 *	Go go go
 	 */
@@ -128,30 +123,24 @@ static int hostess_open(struct net_device *d)
 
 static int hostess_close(struct net_device *d)
 {
-	struct sv11_device *sv11=d->ml_priv;
+	struct z8530_dev *sv11 = dev_to_sv(d);
 	/*
 	 *	Discard new frames
 	 */
-	sv11->sync.chanA.rx_function=z8530_null_rx;
-	/*
-	 *	PPP off
-	 */
-	sppp_close(d);
-	/*
-	 *	Link layer down
-	 */
+	sv11->chanA.rx_function = z8530_null_rx;
+
+	hdlc_close(d);
 	netif_stop_queue(d);
-		
-	switch(dma)
-	{
+
+	switch (dma) {
 		case 0:
-			z8530_sync_close(d, &sv11->sync.chanA);
+			z8530_sync_close(d, &sv11->chanA);
 			break;
 		case 1:
-			z8530_sync_dma_close(d, &sv11->sync.chanA);
+			z8530_sync_dma_close(d, &sv11->chanA);
 			break;
 		case 2:
-			z8530_sync_txdma_close(d, &sv11->sync.chanA);
+			z8530_sync_txdma_close(d, &sv11->chanA);
 			break;
 	}
 	return 0;
@@ -159,232 +148,174 @@ static int hostess_close(struct net_device *d)
 
 static int hostess_ioctl(struct net_device *d, struct ifreq *ifr, int cmd)
 {
-	/* struct sv11_device *sv11=d->ml_priv;
-	   z8530_ioctl(d,&sv11->sync.chanA,ifr,cmd) */
-	return sppp_do_ioctl(d, ifr,cmd);
-}
-
-static struct net_device_stats *hostess_get_stats(struct net_device *d)
-{
-	struct sv11_device *sv11=d->ml_priv;
-	if(sv11)
-		return z8530_get_stats(&sv11->sync.chanA);
-	else
-		return NULL;
+	/* struct z8530_dev *sv11=dev_to_sv(d);
+	   z8530_ioctl(d,&sv11->chanA,ifr,cmd) */
+	return hdlc_ioctl(d, ifr, cmd);
 }
 
 /*
- *	Passed PPP frames, fire them downwind.
+ *	Passed network frames, fire them downwind.
  */
- 
+
 static int hostess_queue_xmit(struct sk_buff *skb, struct net_device *d)
 {
-	struct sv11_device *sv11=d->ml_priv;
-	return z8530_queue_xmit(&sv11->sync.chanA, skb);
+	return z8530_queue_xmit(&dev_to_sv(d)->chanA, skb);
 }
 
-static int hostess_neigh_setup(struct neighbour *n)
+static int hostess_attach(struct net_device *dev, unsigned short encoding,
+			  unsigned short parity)
 {
-	if (n->nud_state == NUD_NONE) {
-		n->ops = &arp_broken_ops;
-		n->output = n->ops->output;
-	}
-	return 0;
-}
-
-static int hostess_neigh_setup_dev(struct net_device *dev, struct neigh_parms *p)
-{
-	if (p->tbl->family == AF_INET) {
-		p->neigh_setup = hostess_neigh_setup;
-		p->ucast_probes = 0;
-		p->mcast_probes = 0;
-	}
-	return 0;
-}
-
-static void sv11_setup(struct net_device *dev)
-{	
-	dev->open = hostess_open;
-	dev->stop = hostess_close;
-	dev->hard_start_xmit = hostess_queue_xmit;
-	dev->get_stats = hostess_get_stats;
-	dev->do_ioctl = hostess_ioctl;
-	dev->neigh_setup = hostess_neigh_setup_dev;
+	if (encoding == ENCODING_NRZ && parity == PARITY_CRC16_PR1_CCITT)
+		return 0;
+	return -EINVAL;
 }
 
 /*
  *	Description block for a Comtrol Hostess SV11 card
  */
- 
-static struct sv11_device *sv11_init(int iobase, int irq)
+
+static struct z8530_dev *sv11_init(int iobase, int irq)
 {
-	struct z8530_dev *dev;
-	struct sv11_device *sv;
-	
+	struct z8530_dev *sv;
+	struct net_device *netdev;
 	/*
 	 *	Get the needed I/O space
 	 */
-	 
-	if(!request_region(iobase, 8, "Comtrol SV11"))
-	{	
-		printk(KERN_WARNING "hostess: I/O 0x%X already in use.\n", iobase);
+
+	if (!request_region(iobase, 8, "Comtrol SV11")) {
+		printk(KERN_WARNING "hostess: I/O 0x%X already in use.\n",
+		       iobase);
 		return NULL;
 	}
-	
-	sv = kzalloc(sizeof(struct sv11_device), GFP_KERNEL);
-	if(!sv)
-		goto fail3;
-			
-	sv->if_ptr=&sv->netdev;
-	
-	sv->netdev.dev = alloc_netdev(0, "hdlc%d", sv11_setup);
-	if(!sv->netdev.dev)
-		goto fail2;
-
-	dev=&sv->sync;
-	
+
+	sv = kzalloc(sizeof(struct z8530_dev), GFP_KERNEL);
+	if (!sv)
+		goto err_kzalloc;
+
 	/*
 	 *	Stuff in the I/O addressing
 	 */
-	 
-	dev->active = 0;
-	
-	dev->chanA.ctrlio=iobase+1;
-	dev->chanA.dataio=iobase+3;
-	dev->chanB.ctrlio=-1;
-	dev->chanB.dataio=-1;
-	dev->chanA.irqs=&z8530_nop;
-	dev->chanB.irqs=&z8530_nop;
-	
-	outb(0, iobase+4);		/* DMA off */
-	
+
+	sv->active = 0;
+
+	sv->chanA.ctrlio = iobase + 1;
+	sv->chanA.dataio = iobase + 3;
+	sv->chanB.ctrlio = -1;
+	sv->chanB.dataio = -1;
+	sv->chanA.irqs = &z8530_nop;
+	sv->chanB.irqs = &z8530_nop;
+
+	outb(0, iobase + 4);		/* DMA off */
+
 	/* We want a fast IRQ for this device. Actually we'd like an even faster
 	   IRQ ;) - This is one driver RtLinux is made for */
-	   
-	if(request_irq(irq, &z8530_interrupt, IRQF_DISABLED, "Hostess SV11", dev)<0)
-	{
+
+	if (request_irq(irq, &z8530_interrupt, IRQF_DISABLED,
+			"Hostess SV11", sv) < 0) {
 		printk(KERN_WARNING "hostess: IRQ %d already in use.\n", irq);
-		goto fail1;
+		goto err_irq;
 	}
-	
-	dev->irq=irq;
-	dev->chanA.private=sv;
-	dev->chanA.netdevice=sv->netdev.dev;
-	dev->chanA.dev=dev;
-	dev->chanB.dev=dev;
-	
-	if(dma)
-	{
+
+	sv->irq = irq;
+	sv->chanA.private = sv;
+	sv->chanA.dev = sv;
+	sv->chanB.dev = sv;
+
+	if (dma) {
 		/*
 		 *	You can have DMA off or 1 and 3 thats the lot
 		 *	on the Comtrol.
 		 */
-		dev->chanA.txdma=3;
-		dev->chanA.rxdma=1;
-		outb(0x03|0x08, iobase+4);		/* DMA on */
-		if(request_dma(dev->chanA.txdma, "Hostess SV/11 (TX)")!=0)
-			goto fail;
-			
-		if(dma==1)
-		{
-			if(request_dma(dev->chanA.rxdma, "Hostess SV/11 (RX)")!=0)
-				goto dmafail;
-		}
+		sv->chanA.txdma = 3;
+		sv->chanA.rxdma = 1;
+		outb(0x03 | 0x08, iobase + 4);		/* DMA on */
+		if (request_dma(sv->chanA.txdma, "Hostess SV/11 (TX)"))
+			goto err_txdma;
+
+		if (dma == 1)
+			if (request_dma(sv->chanA.rxdma, "Hostess SV/11 (RX)"))
+				goto err_rxdma;
 	}
 
 	/* Kill our private IRQ line the hostess can end up chattering
 	   until the configuration is set */
 	disable_irq(irq);
-		
+
 	/*
 	 *	Begin normal initialise
 	 */
-	 
-	if(z8530_init(dev)!=0)
-	{
+
+	if (z8530_init(sv)) {
 		printk(KERN_ERR "Z8530 series device not found.\n");
 		enable_irq(irq);
-		goto dmafail2;
+		goto free_dma;
 	}
-	z8530_channel_load(&dev->chanB, z8530_dead_port);
-	if(dev->type==Z85C30)
-		z8530_channel_load(&dev->chanA, z8530_hdlc_kilostream);
+	z8530_channel_load(&sv->chanB, z8530_dead_port);
+	if (sv->type == Z85C30)
+		z8530_channel_load(&sv->chanA, z8530_hdlc_kilostream);
 	else
-		z8530_channel_load(&dev->chanA, z8530_hdlc_kilostream_85230);
-	
+		z8530_channel_load(&sv->chanA, z8530_hdlc_kilostream_85230);
+
 	enable_irq(irq);
-	
 
 	/*
 	 *	Now we can take the IRQ
 	 */
-	if(dev_alloc_name(dev->chanA.netdevice,"hdlc%d")>=0)
-	{
-		struct net_device *d=dev->chanA.netdevice;
 
-		/* 
-		 *	Initialise the PPP components
-		 */
-		d->ml_priv = sv;
-		sppp_attach(&sv->netdev);
-		
-		/*
-		 *	Local fields
-		 */	
-		
-		d->base_addr = iobase;
-		d->irq = irq;
-		
-		if(register_netdev(d))
-		{
-			printk(KERN_ERR "%s: unable to register device.\n",
-				d->name);
-			sppp_detach(d);
-			goto dmafail2;
-		}
+	sv->chanA.netdevice = netdev = alloc_hdlcdev(sv);
+	if (!netdev)
+		goto free_dma;
 
-		z8530_describe(dev, "I/O", iobase);
-		dev->active=1;
-		return sv;	
+	dev_to_hdlc(netdev)->attach = hostess_attach;
+	dev_to_hdlc(netdev)->xmit = hostess_queue_xmit;
+	netdev->open = hostess_open;
+	netdev->stop = hostess_close;
+	netdev->do_ioctl = hostess_ioctl;
+	netdev->base_addr = iobase;
+	netdev->irq = irq;
+
+	if (register_hdlc_device(netdev)) {
+		printk(KERN_ERR "hostess: unable to register HDLC device.\n");
+		free_netdev(netdev);
+		goto free_dma;
 	}
-dmafail2:
-	if(dma==1)
-		free_dma(dev->chanA.rxdma);
-dmafail:
-	if(dma)
-		free_dma(dev->chanA.txdma);
-fail:
-	free_irq(irq, dev);
-fail1:
-	free_netdev(sv->netdev.dev);
-fail2:
+
+	z8530_describe(sv, "I/O", iobase);
+	sv->active = 1;
+	return sv;
+
+free_dma:
+	if (dma == 1)
+		free_dma(sv->chanA.rxdma);
+err_rxdma:
+	if (dma)
+		free_dma(sv->chanA.txdma);
+err_txdma:
+	free_irq(irq, sv);
+err_irq:
 	kfree(sv);
-fail3:
-	release_region(iobase,8);
+err_kzalloc:
+	release_region(iobase, 8);
 	return NULL;
 }
 
-static void sv11_shutdown(struct sv11_device *dev)
+static void sv11_shutdown(struct z8530_dev *dev)
 {
-	sppp_detach(dev->netdev.dev);
-	unregister_netdev(dev->netdev.dev);
-	z8530_shutdown(&dev->sync);
-	free_irq(dev->sync.irq, dev);
-	if(dma)
-	{
-		if(dma==1)
-			free_dma(dev->sync.chanA.rxdma);
-		free_dma(dev->sync.chanA.txdma);
+	unregister_hdlc_device(dev->chanA.netdevice);
+	z8530_shutdown(dev);
+	free_irq(dev->irq, dev);
+	if (dma) {
+		if (dma == 1)
+			free_dma(dev->chanA.rxdma);
+		free_dma(dev->chanA.txdma);
 	}
-	release_region(dev->sync.chanA.ctrlio-1, 8);
-	free_netdev(dev->netdev.dev);
+	release_region(dev->chanA.ctrlio - 1, 8);
+	free_netdev(dev->chanA.netdevice);
 	kfree(dev);
 }
 
-#ifdef MODULE
-
-static int io=0x200;
-static int irq=9;
+static int io = 0x200;
+static int irq = 9;
 
 module_param(io, int, 0);
 MODULE_PARM_DESC(io, "The I/O base of the Comtrol Hostess SV11 card");
@@ -397,22 +328,17 @@ MODULE_AUTHOR("Alan Cox");
 MODULE_LICENSE("GPL");
 MODULE_DESCRIPTION("Modular driver for the Comtrol Hostess SV11");
 
-static struct sv11_device *sv11_unit;
+static struct z8530_dev *sv11_unit;
 
 int init_module(void)
 {
-	printk(KERN_INFO "SV-11 Z85230 Synchronous Driver v 0.03.\n");
-	printk(KERN_INFO "(c) Copyright 2001, Red Hat Inc.\n");	
-	if((sv11_unit=sv11_init(io,irq))==NULL)
+	if ((sv11_unit = sv11_init(io, irq)) == NULL)
 		return -ENODEV;
 	return 0;
 }
 
 void cleanup_module(void)
 {
-	if(sv11_unit)
+	if (sv11_unit)
 		sv11_shutdown(sv11_unit);
 }
-
-#endif
-
diff --git a/drivers/net/wan/lmc/lmc.h b/drivers/net/wan/lmc/lmc.h
index 882e58c1bfd7..4ced7ac16c2c 100644
--- a/drivers/net/wan/lmc/lmc.h
+++ b/drivers/net/wan/lmc/lmc.h
@@ -11,12 +11,12 @@ unsigned lmc_mii_readreg(lmc_softc_t * const sc, unsigned
       			  devaddr, unsigned regno);
 void lmc_mii_writereg(lmc_softc_t * const sc, unsigned devaddr,
 			       unsigned regno, unsigned data);
-void lmc_led_on(lmc_softc_t * const, u_int32_t);
-void lmc_led_off(lmc_softc_t * const, u_int32_t);
+void lmc_led_on(lmc_softc_t * const, u32);
+void lmc_led_off(lmc_softc_t * const, u32);
 unsigned lmc_mii_readreg(lmc_softc_t * const, unsigned, unsigned);
 void lmc_mii_writereg(lmc_softc_t * const, unsigned, unsigned, unsigned);
-void lmc_gpio_mkinput(lmc_softc_t * const sc, u_int32_t bits);
-void lmc_gpio_mkoutput(lmc_softc_t * const sc, u_int32_t bits);
+void lmc_gpio_mkinput(lmc_softc_t * const sc, u32 bits);
+void lmc_gpio_mkoutput(lmc_softc_t * const sc, u32 bits);
 
 int lmc_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd);
 
@@ -26,8 +26,7 @@ extern lmc_media_t lmc_t1_media;
 extern lmc_media_t lmc_hssi_media;
 
 #ifdef _DBG_EVENTLOG
-static void lmcEventLog( u_int32_t EventNum, u_int32_t arg2, u_int32_t arg3 );
+static void lmcEventLog(u32 EventNum, u32 arg2, u32 arg3);
 #endif
 
 #endif
-
diff --git a/drivers/net/wan/lmc/lmc_debug.c b/drivers/net/wan/lmc/lmc_debug.c
index 3b94352b0d03..15049d711f47 100644
--- a/drivers/net/wan/lmc/lmc_debug.c
+++ b/drivers/net/wan/lmc/lmc_debug.c
@@ -1,4 +1,3 @@
-
 #include <linux/types.h>
 #include <linux/netdevice.h>
 #include <linux/interrupt.h>
@@ -48,10 +47,10 @@ void lmcConsoleLog(char *type, unsigned char *ucData, int iLen)
 #endif
 
 #ifdef DEBUG
-u_int32_t lmcEventLogIndex = 0;
-u_int32_t lmcEventLogBuf[LMC_EVENTLOGSIZE * LMC_EVENTLOGARGS];
+u32 lmcEventLogIndex;
+u32 lmcEventLogBuf[LMC_EVENTLOGSIZE * LMC_EVENTLOGARGS];
 
-void lmcEventLog (u_int32_t EventNum, u_int32_t arg2, u_int32_t arg3)
+void lmcEventLog(u32 EventNum, u32 arg2, u32 arg3)
 {
   lmcEventLogBuf[lmcEventLogIndex++] = EventNum;
   lmcEventLogBuf[lmcEventLogIndex++] = arg2;
diff --git a/drivers/net/wan/lmc/lmc_debug.h b/drivers/net/wan/lmc/lmc_debug.h
index cf3563859bf3..2d46f121549f 100644
--- a/drivers/net/wan/lmc/lmc_debug.h
+++ b/drivers/net/wan/lmc/lmc_debug.h
@@ -38,15 +38,15 @@
 
 
 #ifdef DEBUG
-extern u_int32_t lmcEventLogIndex;
-extern u_int32_t lmcEventLogBuf[LMC_EVENTLOGSIZE * LMC_EVENTLOGARGS];
+extern u32 lmcEventLogIndex;
+extern u32 lmcEventLogBuf[LMC_EVENTLOGSIZE * LMC_EVENTLOGARGS];
 #define LMC_EVENT_LOG(x, y, z) lmcEventLog((x), (y), (z))
 #else
 #define LMC_EVENT_LOG(x,y,z)
 #endif /* end ifdef _DBG_EVENTLOG */
 
 void lmcConsoleLog(char *type, unsigned char *ucData, int iLen);
-void lmcEventLog (u_int32_t EventNum, u_int32_t arg2, u_int32_t arg3);
+void lmcEventLog(u32 EventNum, u32 arg2, u32 arg3);
 void lmc_trace(struct net_device *dev, char *msg);
 
 #endif
diff --git a/drivers/net/wan/lmc/lmc_ioctl.h b/drivers/net/wan/lmc/lmc_ioctl.h
index 57dd861cd3db..72fb113a44ca 100644
--- a/drivers/net/wan/lmc/lmc_ioctl.h
+++ b/drivers/net/wan/lmc/lmc_ioctl.h
@@ -61,7 +61,7 @@
 /*
  * IFTYPE defines
  */
-#define LMC_PPP         1               /* use sppp interface */
+#define LMC_PPP         1               /* use generic HDLC interface */
 #define LMC_NET         2               /* use direct net interface */
 #define LMC_RAW         3               /* use direct net interface */
 
diff --git a/drivers/net/wan/lmc/lmc_main.c b/drivers/net/wan/lmc/lmc_main.c
index 62133cee446a..f80640f5a744 100644
--- a/drivers/net/wan/lmc/lmc_main.c
+++ b/drivers/net/wan/lmc/lmc_main.c
@@ -1,6 +1,7 @@
  /*
   * Copyright (c) 1997-2000 LAN Media Corporation (LMC)
   * All rights reserved.  www.lanmedia.com
+  * Generic HDLC port Copyright (C) 2008 Krzysztof Halasa <khc@pm.waw.pl>
   *
   * This code is written by:
   * Andrew Stanley-Jones (asj@cban.com)
@@ -36,8 +37,6 @@
   *
   */
 
-/* $Id: lmc_main.c,v 1.36 2000/04/11 05:25:25 asj Exp $ */
-
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/string.h>
@@ -49,6 +48,7 @@
 #include <linux/interrupt.h>
 #include <linux/pci.h>
 #include <linux/delay.h>
+#include <linux/hdlc.h>
 #include <linux/init.h>
 #include <linux/in.h>
 #include <linux/if_arp.h>
@@ -57,9 +57,6 @@
 #include <linux/skbuff.h>
 #include <linux/inet.h>
 #include <linux/bitops.h>
-
-#include <net/syncppp.h>
-
 #include <asm/processor.h>             /* Processor type for cache alignment. */
 #include <asm/io.h>
 #include <asm/dma.h>
@@ -78,8 +75,6 @@
 #include "lmc_debug.h"
 #include "lmc_proto.h"
 
-static int lmc_first_load = 0;
-
 static int LMC_PKT_BUF_SZ = 1542;
 
 static struct pci_device_id lmc_pci_tbl[] = {
@@ -91,11 +86,10 @@ static struct pci_device_id lmc_pci_tbl[] = {
 };
 
 MODULE_DEVICE_TABLE(pci, lmc_pci_tbl);
-MODULE_LICENSE("GPL");
+MODULE_LICENSE("GPL v2");
 
 
 static int lmc_start_xmit(struct sk_buff *skb, struct net_device *dev);
-static int lmc_start_xmit(struct sk_buff *skb, struct net_device *dev);
 static int lmc_rx (struct net_device *dev);
 static int lmc_open(struct net_device *dev);
 static int lmc_close(struct net_device *dev);
@@ -114,20 +108,14 @@ static void lmc_driver_timeout(struct net_device *dev);
  * linux reserves 16 device specific IOCTLs.  We call them
  * LMCIOC* to control various bits of our world.
  */
-int lmc_ioctl (struct net_device *dev, struct ifreq *ifr, int cmd) /*fold00*/
+int lmc_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd) /*fold00*/
 {
-    lmc_softc_t *sc;
+    lmc_softc_t *sc = dev_to_sc(dev);
     lmc_ctl_t ctl;
-    int ret;
-    u_int16_t regVal;
+    int ret = -EOPNOTSUPP;
+    u16 regVal;
     unsigned long flags;
 
-    struct sppp *sp;
-
-    ret = -EOPNOTSUPP;
-
-    sc = dev->priv;
-
     lmc_trace(dev, "lmc_ioctl in");
 
     /*
@@ -149,7 +137,6 @@ int lmc_ioctl (struct net_device *dev, struct ifreq *ifr, int cmd) /*fold00*/
         break;
 
     case LMCIOCSINFO: /*fold01*/
-        sp = &((struct ppp_device *) dev)->sppp;
         if (!capable(CAP_NET_ADMIN)) {
             ret = -EPERM;
             break;
@@ -175,25 +162,20 @@ int lmc_ioctl (struct net_device *dev, struct ifreq *ifr, int cmd) /*fold00*/
 		sc->TxDescriptControlInit &= ~LMC_TDES_ADD_CRC_DISABLE;
         }
 
-        if (ctl.keepalive_onoff == LMC_CTL_OFF)
-            sp->pp_flags &= ~PP_KEEPALIVE;	/* Turn off */
-        else
-            sp->pp_flags |= PP_KEEPALIVE;	/* Turn on */
-
         ret = 0;
         break;
 
     case LMCIOCIFTYPE: /*fold01*/
         {
-            u_int16_t	old_type = sc->if_type;
-            u_int16_t	new_type;
+	    u16 old_type = sc->if_type;
+	    u16	new_type;
 
 	    if (!capable(CAP_NET_ADMIN)) {
 		ret = -EPERM;
 		break;
 	    }
 
-	    if (copy_from_user(&new_type, ifr->ifr_data, sizeof(u_int16_t))) {
+	    if (copy_from_user(&new_type, ifr->ifr_data, sizeof(u16))) {
 		ret = -EFAULT;
 		break;
 	    }
@@ -206,15 +188,11 @@ int lmc_ioctl (struct net_device *dev, struct ifreq *ifr, int cmd) /*fold00*/
             }
             
             lmc_proto_close(sc);
-            lmc_proto_detach(sc);
 
             sc->if_type = new_type;
-//            lmc_proto_init(sc);
             lmc_proto_attach(sc);
-            lmc_proto_open(sc);
-
-	    ret = 0 ;
-	    break ;
+	    ret = lmc_proto_open(sc);
+	    break;
 	}
 
     case LMCIOCGETXINFO: /*fold01*/
@@ -241,51 +219,53 @@ int lmc_ioctl (struct net_device *dev, struct ifreq *ifr, int cmd) /*fold00*/
 
         break;
 
-    case LMCIOCGETLMCSTATS: /*fold01*/
-        if (sc->lmc_cardtype == LMC_CARDTYPE_T1){
-            lmc_mii_writereg (sc, 0, 17, T1FRAMER_FERR_LSB);
-            sc->stats.framingBitErrorCount +=
-                lmc_mii_readreg (sc, 0, 18) & 0xff;
-            lmc_mii_writereg (sc, 0, 17, T1FRAMER_FERR_MSB);
-            sc->stats.framingBitErrorCount +=
-                (lmc_mii_readreg (sc, 0, 18) & 0xff) << 8;
-            lmc_mii_writereg (sc, 0, 17, T1FRAMER_LCV_LSB);
-            sc->stats.lineCodeViolationCount +=
-                lmc_mii_readreg (sc, 0, 18) & 0xff;
-            lmc_mii_writereg (sc, 0, 17, T1FRAMER_LCV_MSB);
-            sc->stats.lineCodeViolationCount +=
-                (lmc_mii_readreg (sc, 0, 18) & 0xff) << 8;
-            lmc_mii_writereg (sc, 0, 17, T1FRAMER_AERR);
-            regVal = lmc_mii_readreg (sc, 0, 18) & 0xff;
-
-            sc->stats.lossOfFrameCount +=
-                (regVal & T1FRAMER_LOF_MASK) >> 4;
-            sc->stats.changeOfFrameAlignmentCount +=
-                (regVal & T1FRAMER_COFA_MASK) >> 2;
-            sc->stats.severelyErroredFrameCount +=
-                regVal & T1FRAMER_SEF_MASK;
-        }
-
-        if (copy_to_user(ifr->ifr_data, &sc->stats,
-                         sizeof (struct lmc_statistics)))
-		ret = -EFAULT;
-	else
-		ret = 0;
-        break;
+    case LMCIOCGETLMCSTATS:
+	    if (sc->lmc_cardtype == LMC_CARDTYPE_T1) {
+		    lmc_mii_writereg(sc, 0, 17, T1FRAMER_FERR_LSB);
+		    sc->extra_stats.framingBitErrorCount +=
+			    lmc_mii_readreg(sc, 0, 18) & 0xff;
+		    lmc_mii_writereg(sc, 0, 17, T1FRAMER_FERR_MSB);
+		    sc->extra_stats.framingBitErrorCount +=
+			    (lmc_mii_readreg(sc, 0, 18) & 0xff) << 8;
+		    lmc_mii_writereg(sc, 0, 17, T1FRAMER_LCV_LSB);
+		    sc->extra_stats.lineCodeViolationCount +=
+			    lmc_mii_readreg(sc, 0, 18) & 0xff;
+		    lmc_mii_writereg(sc, 0, 17, T1FRAMER_LCV_MSB);
+		    sc->extra_stats.lineCodeViolationCount +=
+			    (lmc_mii_readreg(sc, 0, 18) & 0xff) << 8;
+		    lmc_mii_writereg(sc, 0, 17, T1FRAMER_AERR);
+		    regVal = lmc_mii_readreg(sc, 0, 18) & 0xff;
+
+		    sc->extra_stats.lossOfFrameCount +=
+			    (regVal & T1FRAMER_LOF_MASK) >> 4;
+		    sc->extra_stats.changeOfFrameAlignmentCount +=
+			    (regVal & T1FRAMER_COFA_MASK) >> 2;
+		    sc->extra_stats.severelyErroredFrameCount +=
+			    regVal & T1FRAMER_SEF_MASK;
+	    }
+	    if (copy_to_user(ifr->ifr_data, &sc->lmc_device->stats,
+			     sizeof(sc->lmc_device->stats)) ||
+		copy_to_user(ifr->ifr_data + sizeof(sc->lmc_device->stats),
+			     &sc->extra_stats, sizeof(sc->extra_stats)))
+		    ret = -EFAULT;
+	    else
+		    ret = 0;
+	    break;
 
-    case LMCIOCCLEARLMCSTATS: /*fold01*/
-        if (!capable(CAP_NET_ADMIN)){
-            ret = -EPERM;
-            break;
-        }
+    case LMCIOCCLEARLMCSTATS:
+	    if (!capable(CAP_NET_ADMIN)) {
+		    ret = -EPERM;
+		    break;
+	    }
 
-        memset (&sc->stats, 0, sizeof (struct lmc_statistics));
-        sc->stats.check = STATCHECK;
-        sc->stats.version_size = (DRIVER_VERSION << 16) +
-            sizeof (struct lmc_statistics);
-        sc->stats.lmc_cardtype = sc->lmc_cardtype;
-        ret = 0;
-        break;
+	    memset(&sc->lmc_device->stats, 0, sizeof(sc->lmc_device->stats));
+	    memset(&sc->extra_stats, 0, sizeof(sc->extra_stats));
+	    sc->extra_stats.check = STATCHECK;
+	    sc->extra_stats.version_size = (DRIVER_VERSION << 16) +
+		    sizeof(sc->lmc_device->stats) + sizeof(sc->extra_stats);
+	    sc->extra_stats.lmc_cardtype = sc->lmc_cardtype;
+	    ret = 0;
+	    break;
 
     case LMCIOCSETCIRCUIT: /*fold01*/
         if (!capable(CAP_NET_ADMIN)){
@@ -330,7 +310,8 @@ int lmc_ioctl (struct net_device *dev, struct ifreq *ifr, int cmd) /*fold00*/
 		ret = -EFAULT;
 		break;
 	}
-        if (copy_to_user(ifr->ifr_data + sizeof (u32), lmcEventLogBuf, sizeof (lmcEventLogBuf)))
+	if (copy_to_user(ifr->ifr_data + sizeof(u32), lmcEventLogBuf,
+			 sizeof(lmcEventLogBuf)))
 		ret = -EFAULT;
 	else
 		ret = 0;
@@ -641,14 +622,12 @@ int lmc_ioctl (struct net_device *dev, struct ifreq *ifr, int cmd) /*fold00*/
 /* the watchdog process that cruises around */
 static void lmc_watchdog (unsigned long data) /*fold00*/
 {
-    struct net_device *dev = (struct net_device *) data;
-    lmc_softc_t *sc;
+    struct net_device *dev = (struct net_device *)data;
+    lmc_softc_t *sc = dev_to_sc(dev);
     int link_status;
-    u_int32_t ticks;
+    u32 ticks;
     unsigned long flags;
 
-    sc = dev->priv;
-
     lmc_trace(dev, "lmc_watchdog in");
 
     spin_lock_irqsave(&sc->lmc_lock, flags);
@@ -677,22 +656,22 @@ static void lmc_watchdog (unsigned long data) /*fold00*/
      * check for a transmit interrupt timeout
      * Has the packet xmt vs xmt serviced threshold been exceeded */
     if (sc->lmc_taint_tx == sc->lastlmc_taint_tx &&
-        sc->stats.tx_packets > sc->lasttx_packets &&
-        sc->tx_TimeoutInd == 0)
+	sc->lmc_device->stats.tx_packets > sc->lasttx_packets &&
+	sc->tx_TimeoutInd == 0)
     {
 
         /* wait for the watchdog to come around again */
         sc->tx_TimeoutInd = 1;
     }
     else if (sc->lmc_taint_tx == sc->lastlmc_taint_tx &&
-             sc->stats.tx_packets > sc->lasttx_packets &&
-             sc->tx_TimeoutInd)
+	     sc->lmc_device->stats.tx_packets > sc->lasttx_packets &&
+	     sc->tx_TimeoutInd)
     {
 
         LMC_EVENT_LOG(LMC_EVENT_XMTINTTMO, LMC_CSR_READ (sc, csr_status), 0);
 
         sc->tx_TimeoutDisplay = 1;
-        sc->stats.tx_TimeoutCnt++;
+	sc->extra_stats.tx_TimeoutCnt++;
 
         /* DEC chip is stuck, hit it with a RESET!!!! */
         lmc_running_reset (dev);
@@ -712,13 +691,11 @@ static void lmc_watchdog (unsigned long data) /*fold00*/
         /* reset the transmit timeout detection flag */
         sc->tx_TimeoutInd = 0;
         sc->lastlmc_taint_tx = sc->lmc_taint_tx;
-        sc->lasttx_packets = sc->stats.tx_packets;
-    }
-    else
-    {
+	sc->lasttx_packets = sc->lmc_device->stats.tx_packets;
+    } else {
         sc->tx_TimeoutInd = 0;
         sc->lastlmc_taint_tx = sc->lmc_taint_tx;
-        sc->lasttx_packets = sc->stats.tx_packets;
+	sc->lasttx_packets = sc->lmc_device->stats.tx_packets;
     }
 
     /* --- end time out check ----------------------------------- */
@@ -748,19 +725,7 @@ static void lmc_watchdog (unsigned long data) /*fold00*/
          sc->last_link_status = 1;
          /* lmc_reset (sc); Again why reset??? */
 
-         /* Inform the world that link protocol is back up. */
 	 netif_carrier_on(dev);
-
-         /* Now we have to tell the syncppp that we had an outage
-          * and that it should deal.  Calling sppp_reopen here
-          * should do the trick, but we may have to call sppp_close
-          * when the link goes down, and call sppp_open here.
-          * Subject to more testing.
-          * --bbraun
-          */
-
-         lmc_proto_reopen(sc);
-
      }
 
     /* Call media specific watchdog functions */
@@ -816,114 +781,93 @@ kick_timer:
 
 }
 
-static void lmc_setup(struct net_device * const dev) /*fold00*/
+static int lmc_attach(struct net_device *dev, unsigned short encoding,
+		      unsigned short parity)
 {
-    lmc_trace(dev, "lmc_setup in");
-
-    dev->type = ARPHRD_HDLC;
-    dev->hard_start_xmit = lmc_start_xmit;
-    dev->open = lmc_open;
-    dev->stop = lmc_close;
-    dev->get_stats = lmc_get_stats;
-    dev->do_ioctl = lmc_ioctl;
-    dev->tx_timeout = lmc_driver_timeout;
-    dev->watchdog_timeo = (HZ); /* 1 second */
-    
-    lmc_trace(dev, "lmc_setup out");
+	if (encoding == ENCODING_NRZ && parity == PARITY_CRC16_PR1_CCITT)
+		return 0;
+	return -EINVAL;
 }
 
-
 static int __devinit lmc_init_one(struct pci_dev *pdev,
 				  const struct pci_device_id *ent)
 {
-    struct net_device *dev;
-    lmc_softc_t *sc;
-    u16 subdevice;
-    u_int16_t AdapModelNum;
-    int err = -ENOMEM;
-    static int cards_found;
-#ifndef GCOM
-    /* We name by type not by vendor */
-    static const char lmcname[] = "hdlc%d";
-#else
-    /* 
-     * GCOM uses LMC vendor name so that clients can know which card
-     * to attach to.
-     */
-    static const char lmcname[] = "lmc%d";
-#endif
-
-
-    /*
-     * Allocate our own device structure
-     */
-    dev = alloc_netdev(sizeof(lmc_softc_t), lmcname, lmc_setup);
-    if (!dev) {
-        printk (KERN_ERR "lmc:alloc_netdev for device failed\n");
-	goto out1;
-    }
- 
-    lmc_trace(dev, "lmc_init_one in");
-
-    err = pci_enable_device(pdev);
-    if (err) {
-	    printk(KERN_ERR "lmc: pci enable failed:%d\n", err);
-	    goto out2;
-    }
-    
-    if (pci_request_regions(pdev, "lmc")) {
-	    printk(KERN_ERR "lmc: pci_request_region failed\n");
-	    err = -EIO;
-	    goto out3;
-    }
-
-    pci_set_drvdata(pdev, dev);
-
-    if(lmc_first_load == 0){
-        printk(KERN_INFO "Lan Media Corporation WAN Driver Version %d.%d.%d\n",
-	       DRIVER_MAJOR_VERSION, DRIVER_MINOR_VERSION,DRIVER_SUB_VERSION);
-        lmc_first_load = 1;
-    }
-    
-    sc = dev->priv;
-    sc->lmc_device = dev;
-    sc->name = dev->name;
-
-    /* Initialize the sppp layer */
-    /* An ioctl can cause a subsequent detach for raw frame interface */
-    dev->ml_priv = sc;
-    sc->if_type = LMC_PPP;
-    sc->check = 0xBEAFCAFE;
-    dev->base_addr = pci_resource_start(pdev, 0);
-    dev->irq = pdev->irq;
-
-    SET_NETDEV_DEV(dev, &pdev->dev);
-
-    /*
-     * This will get the protocol layer ready and do any 1 time init's
-     * Must have a valid sc and dev structure
-     */
-    lmc_proto_init(sc);
-
-    lmc_proto_attach(sc);
+	lmc_softc_t *sc;
+	struct net_device *dev;
+	u16 subdevice;
+	u16 AdapModelNum;
+	int err;
+	static int cards_found;
+
+	/* lmc_trace(dev, "lmc_init_one in"); */
+
+	err = pci_enable_device(pdev);
+	if (err) {
+		printk(KERN_ERR "lmc: pci enable failed: %d\n", err);
+		return err;
+	}
 
-    /*
-     * Why were we changing this???
-     dev->tx_queue_len = 100;
-     */
+	err = pci_request_regions(pdev, "lmc");
+	if (err) {
+		printk(KERN_ERR "lmc: pci_request_region failed\n");
+		goto err_req_io;
+	}
 
-    /* Init the spin lock so can call it latter */
+	/*
+	 * Allocate our own device structure
+	 */
+	sc = kzalloc(sizeof(lmc_softc_t), GFP_KERNEL);
+	if (!sc) {
+		err = -ENOMEM;
+		goto err_kzalloc;
+	}
 
-    spin_lock_init(&sc->lmc_lock);
-    pci_set_master(pdev);
+	dev = alloc_hdlcdev(sc);
+	if (!dev) {
+		printk(KERN_ERR "lmc:alloc_netdev for device failed\n");
+		goto err_hdlcdev;
+	}
 
-    printk ("%s: detected at %lx, irq %d\n", dev->name,
-	    dev->base_addr, dev->irq);
 
-    if (register_netdev (dev) != 0) {
-        printk (KERN_ERR "%s: register_netdev failed.\n", dev->name);
-	goto out4;
-    }
+	dev->type = ARPHRD_HDLC;
+	dev_to_hdlc(dev)->xmit = lmc_start_xmit;
+	dev_to_hdlc(dev)->attach = lmc_attach;
+	dev->open = lmc_open;
+	dev->stop = lmc_close;
+	dev->get_stats = lmc_get_stats;
+	dev->do_ioctl = lmc_ioctl;
+	dev->tx_timeout = lmc_driver_timeout;
+	dev->watchdog_timeo = HZ; /* 1 second */
+	dev->tx_queue_len = 100;
+	sc->lmc_device = dev;
+	sc->name = dev->name;
+	sc->if_type = LMC_PPP;
+	sc->check = 0xBEAFCAFE;
+	dev->base_addr = pci_resource_start(pdev, 0);
+	dev->irq = pdev->irq;
+	pci_set_drvdata(pdev, dev);
+	SET_NETDEV_DEV(dev, &pdev->dev);
+
+	/*
+	 * This will get the protocol layer ready and do any 1 time init's
+	 * Must have a valid sc and dev structure
+	 */
+	lmc_proto_attach(sc);
+
+	/* Init the spin lock so can call it latter */
+
+	spin_lock_init(&sc->lmc_lock);
+	pci_set_master(pdev);
+
+	printk(KERN_INFO "%s: detected at %lx, irq %d\n", dev->name,
+	       dev->base_addr, dev->irq);
+
+	err = register_hdlc_device(dev);
+	if (err) {
+		printk(KERN_ERR "%s: register_netdev failed.\n", dev->name);
+		free_netdev(dev);
+		goto err_hdlcdev;
+	}
 
     sc->lmc_cardtype = LMC_CARDTYPE_UNKNOWN;
     sc->lmc_timing = LMC_CTL_CLOCK_SOURCE_EXT;
@@ -939,27 +883,27 @@ static int __devinit lmc_init_one(struct pci_dev *pdev,
 
     switch (subdevice) {
     case PCI_DEVICE_ID_LMC_HSSI:
-        printk ("%s: LMC HSSI\n", dev->name);
+	printk(KERN_INFO "%s: LMC HSSI\n", dev->name);
         sc->lmc_cardtype = LMC_CARDTYPE_HSSI;
         sc->lmc_media = &lmc_hssi_media;
         break;
     case PCI_DEVICE_ID_LMC_DS3:
-        printk ("%s: LMC DS3\n", dev->name);
+	printk(KERN_INFO "%s: LMC DS3\n", dev->name);
         sc->lmc_cardtype = LMC_CARDTYPE_DS3;
         sc->lmc_media = &lmc_ds3_media;
         break;
     case PCI_DEVICE_ID_LMC_SSI:
-        printk ("%s: LMC SSI\n", dev->name);
+	printk(KERN_INFO "%s: LMC SSI\n", dev->name);
         sc->lmc_cardtype = LMC_CARDTYPE_SSI;
         sc->lmc_media = &lmc_ssi_media;
         break;
     case PCI_DEVICE_ID_LMC_T1:
-        printk ("%s: LMC T1\n", dev->name);
+	printk(KERN_INFO "%s: LMC T1\n", dev->name);
         sc->lmc_cardtype = LMC_CARDTYPE_T1;
         sc->lmc_media = &lmc_t1_media;
         break;
     default:
-        printk (KERN_WARNING "%s: LMC UNKOWN CARD!\n", dev->name);
+	printk(KERN_WARNING "%s: LMC UNKOWN CARD!\n", dev->name);
         break;
     }
 
@@ -977,32 +921,28 @@ static int __devinit lmc_init_one(struct pci_dev *pdev,
      */
     AdapModelNum = (lmc_mii_readreg (sc, 0, 3) & 0x3f0) >> 4;
 
-    if ((AdapModelNum == LMC_ADAP_T1
-         && subdevice == PCI_DEVICE_ID_LMC_T1) ||	/* detect LMC1200 */
-        (AdapModelNum == LMC_ADAP_SSI
-         && subdevice == PCI_DEVICE_ID_LMC_SSI) ||	/* detect LMC1000 */
-        (AdapModelNum == LMC_ADAP_DS3
-         && subdevice == PCI_DEVICE_ID_LMC_DS3) ||	/* detect LMC5245 */
-        (AdapModelNum == LMC_ADAP_HSSI
-         && subdevice == PCI_DEVICE_ID_LMC_HSSI))
-    {				/* detect LMC5200 */
+    if ((AdapModelNum != LMC_ADAP_T1 || /* detect LMC1200 */
+	 subdevice != PCI_DEVICE_ID_LMC_T1) &&
+	(AdapModelNum != LMC_ADAP_SSI || /* detect LMC1000 */
+	 subdevice != PCI_DEVICE_ID_LMC_SSI) &&
+	(AdapModelNum != LMC_ADAP_DS3 || /* detect LMC5245 */
+	 subdevice != PCI_DEVICE_ID_LMC_DS3) &&
+	(AdapModelNum != LMC_ADAP_HSSI || /* detect LMC5200 */
+	 subdevice != PCI_DEVICE_ID_LMC_HSSI))
+	    printk(KERN_WARNING "%s: Model number (%d) miscompare for PCI"
+		   " Subsystem ID = 0x%04x\n",
+		   dev->name, AdapModelNum, subdevice);
 
-    }
-    else {
-        printk ("%s: Model number (%d) miscompare for PCI Subsystem ID = 0x%04x\n",
-                dev->name, AdapModelNum, subdevice);
-//        return (NULL);
-    }
     /*
      * reset clock
      */
     LMC_CSR_WRITE (sc, csr_gp_timer, 0xFFFFFFFFUL);
 
     sc->board_idx = cards_found++;
-    sc->stats.check = STATCHECK;
-    sc->stats.version_size = (DRIVER_VERSION << 16) +
-        sizeof (struct lmc_statistics);
-    sc->stats.lmc_cardtype = sc->lmc_cardtype;
+    sc->extra_stats.check = STATCHECK;
+    sc->extra_stats.version_size = (DRIVER_VERSION << 16) +
+	    sizeof(sc->lmc_device->stats) + sizeof(sc->extra_stats);
+    sc->extra_stats.lmc_cardtype = sc->lmc_cardtype;
 
     sc->lmc_ok = 0;
     sc->last_link_status = 0;
@@ -1010,58 +950,51 @@ static int __devinit lmc_init_one(struct pci_dev *pdev,
     lmc_trace(dev, "lmc_init_one out");
     return 0;
 
- out4:
-    lmc_proto_detach(sc);
- out3:
-    if (pdev) {
-	    pci_release_regions(pdev);
-	    pci_set_drvdata(pdev, NULL);
-    }
- out2:
-    free_netdev(dev);
- out1:
-    return err;
+err_hdlcdev:
+	pci_set_drvdata(pdev, NULL);
+	kfree(sc);
+err_kzalloc:
+	pci_release_regions(pdev);
+err_req_io:
+	pci_disable_device(pdev);
+	return err;
 }
 
 /*
  * Called from pci when removing module.
  */
-static void __devexit lmc_remove_one (struct pci_dev *pdev)
+static void __devexit lmc_remove_one(struct pci_dev *pdev)
 {
-    struct net_device *dev = pci_get_drvdata(pdev);
-    
-    if (dev) {
-	    lmc_softc_t *sc = dev->priv;
-	    
-	    printk("%s: removing...\n", dev->name);
-	    lmc_proto_detach(sc);
-	    unregister_netdev(dev);
-	    free_netdev(dev);
-	    pci_release_regions(pdev);
-	    pci_disable_device(pdev);
-	    pci_set_drvdata(pdev, NULL);
-    }
+	struct net_device *dev = pci_get_drvdata(pdev);
+
+	if (dev) {
+		printk(KERN_DEBUG "%s: removing...\n", dev->name);
+		unregister_hdlc_device(dev);
+		free_netdev(dev);
+		pci_release_regions(pdev);
+		pci_disable_device(pdev);
+		pci_set_drvdata(pdev, NULL);
+	}
 }
 
 /* After this is called, packets can be sent.
  * Does not initialize the addresses
  */
-static int lmc_open (struct net_device *dev) /*fold00*/
+static int lmc_open(struct net_device *dev)
 {
-    lmc_softc_t *sc = dev->priv;
+    lmc_softc_t *sc = dev_to_sc(dev);
+    int err;
 
     lmc_trace(dev, "lmc_open in");
 
     lmc_led_on(sc, LMC_DS3_LED0);
 
-    lmc_dec_reset (sc);
-    lmc_reset (sc);
-
-    LMC_EVENT_LOG(LMC_EVENT_RESET1, LMC_CSR_READ (sc, csr_status), 0);
-    LMC_EVENT_LOG(LMC_EVENT_RESET2,
-                  lmc_mii_readreg (sc, 0, 16),
-                  lmc_mii_readreg (sc, 0, 17));
+    lmc_dec_reset(sc);
+    lmc_reset(sc);
 
+    LMC_EVENT_LOG(LMC_EVENT_RESET1, LMC_CSR_READ(sc, csr_status), 0);
+    LMC_EVENT_LOG(LMC_EVENT_RESET2, lmc_mii_readreg(sc, 0, 16),
+		  lmc_mii_readreg(sc, 0, 17));
 
     if (sc->lmc_ok){
         lmc_trace(dev, "lmc_open lmc_ok out");
@@ -1106,14 +1039,14 @@ static int lmc_open (struct net_device *dev) /*fold00*/
 
     /* dev->flags |= IFF_UP; */
 
-    lmc_proto_open(sc);
+    if ((err = lmc_proto_open(sc)) != 0)
+	    return err;
 
     dev->do_ioctl = lmc_ioctl;
 
 
     netif_start_queue(dev);
-    
-    sc->stats.tx_tbusy0++ ;
+    sc->extra_stats.tx_tbusy0++;
 
     /*
      * select what interrupts we want to get
@@ -1165,8 +1098,7 @@ static int lmc_open (struct net_device *dev) /*fold00*/
 
 static void lmc_running_reset (struct net_device *dev) /*fold00*/
 {
-
-    lmc_softc_t *sc = (lmc_softc_t *) dev->priv;
+    lmc_softc_t *sc = dev_to_sc(dev);
 
     lmc_trace(dev, "lmc_runnig_reset in");
 
@@ -1184,7 +1116,7 @@ static void lmc_running_reset (struct net_device *dev) /*fold00*/
     netif_wake_queue(dev);
 
     sc->lmc_txfull = 0;
-    sc->stats.tx_tbusy0++ ;
+    sc->extra_stats.tx_tbusy0++;
 
     sc->lmc_intrmask = TULIP_DEFAULT_INTR_MASK;
     LMC_CSR_WRITE (sc, csr_intr, sc->lmc_intrmask);
@@ -1200,14 +1132,13 @@ static void lmc_running_reset (struct net_device *dev) /*fold00*/
  * This disables the timer for the watchdog and keepalives,
  * and disables the irq for dev.
  */
-static int lmc_close (struct net_device *dev) /*fold00*/
+static int lmc_close(struct net_device *dev)
 {
     /* not calling release_region() as we should */
-    lmc_softc_t *sc;
+    lmc_softc_t *sc = dev_to_sc(dev);
 
     lmc_trace(dev, "lmc_close in");
-    
-    sc = dev->priv;
+
     sc->lmc_ok = 0;
     sc->lmc_media->set_link_status (sc, 0);
     del_timer (&sc->timer);
@@ -1215,7 +1146,7 @@ static int lmc_close (struct net_device *dev) /*fold00*/
     lmc_ifdown (dev);
 
     lmc_trace(dev, "lmc_close out");
-    
+
     return 0;
 }
 
@@ -1223,16 +1154,16 @@ static int lmc_close (struct net_device *dev) /*fold00*/
 /* When the interface goes down, this is called */
 static int lmc_ifdown (struct net_device *dev) /*fold00*/
 {
-    lmc_softc_t *sc = dev->priv;
+    lmc_softc_t *sc = dev_to_sc(dev);
     u32 csr6;
     int i;
 
     lmc_trace(dev, "lmc_ifdown in");
-    
+
     /* Don't let anything else go on right now */
     //    dev->start = 0;
     netif_stop_queue(dev);
-    sc->stats.tx_tbusy1++ ;
+    sc->extra_stats.tx_tbusy1++;
 
     /* stop interrupts */
     /* Clear the interrupt mask */
@@ -1244,8 +1175,8 @@ static int lmc_ifdown (struct net_device *dev) /*fold00*/
     csr6 &= ~LMC_DEC_SR;		/* Turn off the Receive bit */
     LMC_CSR_WRITE (sc, csr_command, csr6);
 
-    sc->stats.rx_missed_errors +=
-        LMC_CSR_READ (sc, csr_missed_frames) & 0xffff;
+    sc->lmc_device->stats.rx_missed_errors +=
+	    LMC_CSR_READ(sc, csr_missed_frames) & 0xffff;
 
     /* release the interrupt */
     if(sc->got_irq == 1){
@@ -1276,7 +1207,7 @@ static int lmc_ifdown (struct net_device *dev) /*fold00*/
     lmc_led_off (sc, LMC_MII16_LED_ALL);
 
     netif_wake_queue(dev);
-    sc->stats.tx_tbusy0++ ;
+    sc->extra_stats.tx_tbusy0++;
 
     lmc_trace(dev, "lmc_ifdown out");
 
@@ -1289,7 +1220,7 @@ static int lmc_ifdown (struct net_device *dev) /*fold00*/
 static irqreturn_t lmc_interrupt (int irq, void *dev_instance) /*fold00*/
 {
     struct net_device *dev = (struct net_device *) dev_instance;
-    lmc_softc_t *sc;
+    lmc_softc_t *sc = dev_to_sc(dev);
     u32 csr;
     int i;
     s32 stat;
@@ -1300,8 +1231,6 @@ static irqreturn_t lmc_interrupt (int irq, void *dev_instance) /*fold00*/
 
     lmc_trace(dev, "lmc_interrupt in");
 
-    sc = dev->priv;
-    
     spin_lock(&sc->lmc_lock);
 
     /*
@@ -1354,7 +1283,7 @@ static irqreturn_t lmc_interrupt (int irq, void *dev_instance) /*fold00*/
 
 	    int		n_compl = 0 ;
             /* reset the transmit timeout detection flag -baz */
-            sc->stats.tx_NoCompleteCnt = 0;
+	    sc->extra_stats.tx_NoCompleteCnt = 0;
 
             badtx = sc->lmc_taint_tx;
             i = badtx % LMC_TXDESCS;
@@ -1378,27 +1307,25 @@ static irqreturn_t lmc_interrupt (int irq, void *dev_instance) /*fold00*/
                 if (sc->lmc_txq[i] == NULL)
                     continue;
 
-                /*
-                 * Check the total error summary to look for any errors
-                 */
-                if (stat & 0x8000) {
-                    sc->stats.tx_errors++;
-                    if (stat & 0x4104)
-                        sc->stats.tx_aborted_errors++;
-                    if (stat & 0x0C00)
-                        sc->stats.tx_carrier_errors++;
-                    if (stat & 0x0200)
-                        sc->stats.tx_window_errors++;
-                    if (stat & 0x0002)
-                        sc->stats.tx_fifo_errors++;
-                }
-                else {
-                    
-                    sc->stats.tx_bytes += sc->lmc_txring[i].length & 0x7ff;
-                    
-                    sc->stats.tx_packets++;
+		/*
+		 * Check the total error summary to look for any errors
+		 */
+		if (stat & 0x8000) {
+			sc->lmc_device->stats.tx_errors++;
+			if (stat & 0x4104)
+				sc->lmc_device->stats.tx_aborted_errors++;
+			if (stat & 0x0C00)
+				sc->lmc_device->stats.tx_carrier_errors++;
+			if (stat & 0x0200)
+				sc->lmc_device->stats.tx_window_errors++;
+			if (stat & 0x0002)
+				sc->lmc_device->stats.tx_fifo_errors++;
+		} else {
+			sc->lmc_device->stats.tx_bytes += sc->lmc_txring[i].length & 0x7ff;
+
+			sc->lmc_device->stats.tx_packets++;
                 }
-                
+
                 //                dev_kfree_skb(sc->lmc_txq[i]);
                 dev_kfree_skb_irq(sc->lmc_txq[i]);
                 sc->lmc_txq[i] = NULL;
@@ -1415,13 +1342,13 @@ static irqreturn_t lmc_interrupt (int irq, void *dev_instance) /*fold00*/
             LMC_EVENT_LOG(LMC_EVENT_TBUSY0, n_compl, 0);
             sc->lmc_txfull = 0;
             netif_wake_queue(dev);
-            sc->stats.tx_tbusy0++ ;
+	    sc->extra_stats.tx_tbusy0++;
 
 
 #ifdef DEBUG
-            sc->stats.dirtyTx = badtx;
-            sc->stats.lmc_next_tx = sc->lmc_next_tx;
-            sc->stats.lmc_txfull = sc->lmc_txfull;
+	    sc->extra_stats.dirtyTx = badtx;
+	    sc->extra_stats.lmc_next_tx = sc->lmc_next_tx;
+	    sc->extra_stats.lmc_txfull = sc->lmc_txfull;
 #endif
             sc->lmc_taint_tx = badtx;
 
@@ -1476,9 +1403,9 @@ lmc_int_fail_out:
     return IRQ_RETVAL(handled);
 }
 
-static int lmc_start_xmit (struct sk_buff *skb, struct net_device *dev) /*fold00*/
+static int lmc_start_xmit(struct sk_buff *skb, struct net_device *dev)
 {
-    lmc_softc_t *sc;
+    lmc_softc_t *sc = dev_to_sc(dev);
     u32 flag;
     int entry;
     int ret = 0;
@@ -1486,8 +1413,6 @@ static int lmc_start_xmit (struct sk_buff *skb, struct net_device *dev) /*fold00
 
     lmc_trace(dev, "lmc_start_xmit in");
 
-    sc = dev->priv;
-
     spin_lock_irqsave(&sc->lmc_lock, flags);
 
     /* normal path, tbusy known to be zero */
@@ -1532,8 +1457,8 @@ static int lmc_start_xmit (struct sk_buff *skb, struct net_device *dev) /*fold00
     if (sc->lmc_next_tx - sc->lmc_taint_tx >= LMC_TXDESCS - 1)
     {				/* ring full, go busy */
         sc->lmc_txfull = 1;
-        netif_stop_queue(dev);
-        sc->stats.tx_tbusy1++ ;
+	netif_stop_queue(dev);
+	sc->extra_stats.tx_tbusy1++;
         LMC_EVENT_LOG(LMC_EVENT_TBUSY1, entry, 0);
     }
 #endif
@@ -1550,7 +1475,7 @@ static int lmc_start_xmit (struct sk_buff *skb, struct net_device *dev) /*fold00
      * the watchdog timer handler. -baz
      */
 
-    sc->stats.tx_NoCompleteCnt++;
+    sc->extra_stats.tx_NoCompleteCnt++;
     sc->lmc_next_tx++;
 
     /* give ownership to the chip */
@@ -1569,9 +1494,9 @@ static int lmc_start_xmit (struct sk_buff *skb, struct net_device *dev) /*fold00
 }
 
 
-static int lmc_rx (struct net_device *dev) /*fold00*/
+static int lmc_rx(struct net_device *dev)
 {
-    lmc_softc_t *sc;
+    lmc_softc_t *sc = dev_to_sc(dev);
     int i;
     int rx_work_limit = LMC_RXDESCS;
     unsigned int next_rx;
@@ -1583,8 +1508,6 @@ static int lmc_rx (struct net_device *dev) /*fold00*/
 
     lmc_trace(dev, "lmc_rx in");
 
-    sc = dev->priv;
-
     lmc_led_on(sc, LMC_DS3_LED3);
 
     rxIntLoopCnt = 0;		/* debug -baz */
@@ -1597,39 +1520,38 @@ static int lmc_rx (struct net_device *dev) /*fold00*/
         rxIntLoopCnt++;		/* debug -baz */
         len = ((stat & LMC_RDES_FRAME_LENGTH) >> RDES_FRAME_LENGTH_BIT_NUMBER);
         if ((stat & 0x0300) != 0x0300) {  /* Check first segment and last segment */
-            if ((stat & 0x0000ffff) != 0x7fff) {
-                /* Oversized frame */
-                sc->stats.rx_length_errors++;
-                goto skip_packet;
-            }
-        }
-
-        if(stat & 0x00000008){ /* Catch a dribbling bit error */
-            sc->stats.rx_errors++;
-            sc->stats.rx_frame_errors++;
-            goto skip_packet;
-        }
+		if ((stat & 0x0000ffff) != 0x7fff) {
+			/* Oversized frame */
+			sc->lmc_device->stats.rx_length_errors++;
+			goto skip_packet;
+		}
+	}
 
+	if (stat & 0x00000008) { /* Catch a dribbling bit error */
+		sc->lmc_device->stats.rx_errors++;
+		sc->lmc_device->stats.rx_frame_errors++;
+		goto skip_packet;
+	}
 
-        if(stat & 0x00000004){ /* Catch a CRC error by the Xilinx */
-            sc->stats.rx_errors++;
-            sc->stats.rx_crc_errors++;
-            goto skip_packet;
-        }
 
+	if (stat & 0x00000004) { /* Catch a CRC error by the Xilinx */
+		sc->lmc_device->stats.rx_errors++;
+		sc->lmc_device->stats.rx_crc_errors++;
+		goto skip_packet;
+	}
 
-        if (len > LMC_PKT_BUF_SZ){
-            sc->stats.rx_length_errors++;
-            localLengthErrCnt++;
-            goto skip_packet;
-        }
+	if (len > LMC_PKT_BUF_SZ) {
+		sc->lmc_device->stats.rx_length_errors++;
+		localLengthErrCnt++;
+		goto skip_packet;
+	}
 
-        if (len < sc->lmc_crcSize + 2) {
-            sc->stats.rx_length_errors++;
-            sc->stats.rx_SmallPktCnt++;
-            localLengthErrCnt++;
-            goto skip_packet;
-        }
+	if (len < sc->lmc_crcSize + 2) {
+		sc->lmc_device->stats.rx_length_errors++;
+		sc->extra_stats.rx_SmallPktCnt++;
+		localLengthErrCnt++;
+		goto skip_packet;
+	}
 
         if(stat & 0x00004000){
             printk(KERN_WARNING "%s: Receiver descriptor error, receiver out of sync?\n", dev->name);
@@ -1656,8 +1578,8 @@ static int lmc_rx (struct net_device *dev) /*fold00*/
         }
         
         dev->last_rx = jiffies;
-        sc->stats.rx_packets++;
-        sc->stats.rx_bytes += len;
+	sc->lmc_device->stats.rx_packets++;
+	sc->lmc_device->stats.rx_bytes += len;
 
         LMC_CONSOLE_LOG("recv", skb->data, len);
 
@@ -1679,7 +1601,6 @@ static int lmc_rx (struct net_device *dev) /*fold00*/
 
             skb_put (skb, len);
             skb->protocol = lmc_proto_type(sc, skb);
-            skb->protocol = htons(ETH_P_WAN_PPP);
             skb_reset_mac_header(skb);
             /* skb_reset_network_header(skb); */
             skb->dev = dev;
@@ -1704,7 +1625,7 @@ static int lmc_rx (struct net_device *dev) /*fold00*/
                  * in which care we'll try to allocate the buffer
                  * again.  (once a second)
                  */
-                sc->stats.rx_BuffAllocErr++;
+		sc->extra_stats.rx_BuffAllocErr++;
                 LMC_EVENT_LOG(LMC_EVENT_RCVINT, stat, len);
                 sc->failed_recv_alloc = 1;
                 goto skip_out_of_mem;
@@ -1739,16 +1660,14 @@ static int lmc_rx (struct net_device *dev) /*fold00*/
      * descriptors with bogus packets
      *
     if (localLengthErrCnt > LMC_RXDESCS - 3) {
-        sc->stats.rx_BadPktSurgeCnt++;
-        LMC_EVENT_LOG(LMC_EVENT_BADPKTSURGE,
-                      localLengthErrCnt,
-                      sc->stats.rx_BadPktSurgeCnt);
+	sc->extra_stats.rx_BadPktSurgeCnt++;
+	LMC_EVENT_LOG(LMC_EVENT_BADPKTSURGE, localLengthErrCnt,
+		      sc->extra_stats.rx_BadPktSurgeCnt);
     } */
 
     /* save max count of receive descriptors serviced */
-    if (rxIntLoopCnt > sc->stats.rxIntLoopCnt) {
-        sc->stats.rxIntLoopCnt = rxIntLoopCnt;	/* debug -baz */
-    }
+    if (rxIntLoopCnt > sc->extra_stats.rxIntLoopCnt)
+	    sc->extra_stats.rxIntLoopCnt = rxIntLoopCnt; /* debug -baz */
 
 #ifdef DEBUG
     if (rxIntLoopCnt == 0)
@@ -1775,23 +1694,22 @@ skip_out_of_mem:
     return 0;
 }
 
-static struct net_device_stats *lmc_get_stats (struct net_device *dev) /*fold00*/
+static struct net_device_stats *lmc_get_stats(struct net_device *dev)
 {
-    lmc_softc_t *sc = dev->priv;
+    lmc_softc_t *sc = dev_to_sc(dev);
     unsigned long flags;
 
     lmc_trace(dev, "lmc_get_stats in");
 
-
     spin_lock_irqsave(&sc->lmc_lock, flags);
 
-    sc->stats.rx_missed_errors += LMC_CSR_READ (sc, csr_missed_frames) & 0xffff;
+    sc->lmc_device->stats.rx_missed_errors += LMC_CSR_READ(sc, csr_missed_frames) & 0xffff;
 
     spin_unlock_irqrestore(&sc->lmc_lock, flags);
 
     lmc_trace(dev, "lmc_get_stats out");
 
-    return (struct net_device_stats *) &sc->stats;
+    return &sc->lmc_device->stats;
 }
 
 static struct pci_driver lmc_driver = {
@@ -1970,7 +1888,7 @@ static void lmc_softreset (lmc_softc_t * const sc) /*fold00*/
     {
         if (sc->lmc_txq[i] != NULL){		/* have buffer */
             dev_kfree_skb(sc->lmc_txq[i]);	/* free it */
-            sc->stats.tx_dropped++;      /* We just dropped a packet */
+	    sc->lmc_device->stats.tx_dropped++;	/* We just dropped a packet */
         }
         sc->lmc_txq[i] = NULL;
         sc->lmc_txring[i].status = 0x00000000;
@@ -1982,7 +1900,7 @@ static void lmc_softreset (lmc_softc_t * const sc) /*fold00*/
     lmc_trace(sc->lmc_device, "lmc_softreset out");
 }
 
-void lmc_gpio_mkinput(lmc_softc_t * const sc, u_int32_t bits) /*fold00*/
+void lmc_gpio_mkinput(lmc_softc_t * const sc, u32 bits) /*fold00*/
 {
     lmc_trace(sc->lmc_device, "lmc_gpio_mkinput in");
     sc->lmc_gpio_io &= ~bits;
@@ -1990,7 +1908,7 @@ void lmc_gpio_mkinput(lmc_softc_t * const sc, u_int32_t bits) /*fold00*/
     lmc_trace(sc->lmc_device, "lmc_gpio_mkinput out");
 }
 
-void lmc_gpio_mkoutput(lmc_softc_t * const sc, u_int32_t bits) /*fold00*/
+void lmc_gpio_mkoutput(lmc_softc_t * const sc, u32 bits) /*fold00*/
 {
     lmc_trace(sc->lmc_device, "lmc_gpio_mkoutput in");
     sc->lmc_gpio_io |= bits;
@@ -1998,7 +1916,7 @@ void lmc_gpio_mkoutput(lmc_softc_t * const sc, u_int32_t bits) /*fold00*/
     lmc_trace(sc->lmc_device, "lmc_gpio_mkoutput out");
 }
 
-void lmc_led_on(lmc_softc_t * const sc, u_int32_t led) /*fold00*/
+void lmc_led_on(lmc_softc_t * const sc, u32 led) /*fold00*/
 {
     lmc_trace(sc->lmc_device, "lmc_led_on in");
     if((~sc->lmc_miireg16) & led){ /* Already on! */
@@ -2011,7 +1929,7 @@ void lmc_led_on(lmc_softc_t * const sc, u_int32_t led) /*fold00*/
     lmc_trace(sc->lmc_device, "lmc_led_on out");
 }
 
-void lmc_led_off(lmc_softc_t * const sc, u_int32_t led) /*fold00*/
+void lmc_led_off(lmc_softc_t * const sc, u32 led) /*fold00*/
 {
     lmc_trace(sc->lmc_device, "lmc_led_off in");
     if(sc->lmc_miireg16 & led){ /* Already set don't do anything */
@@ -2061,13 +1979,13 @@ static void lmc_reset(lmc_softc_t * const sc) /*fold00*/
      */
     sc->lmc_media->init(sc);
 
-    sc->stats.resetCount++;
+    sc->extra_stats.resetCount++;
     lmc_trace(sc->lmc_device, "lmc_reset out");
 }
 
 static void lmc_dec_reset(lmc_softc_t * const sc) /*fold00*/
 {
-    u_int32_t val;
+    u32 val;
     lmc_trace(sc->lmc_device, "lmc_dec_reset in");
 
     /*
@@ -2151,23 +2069,21 @@ static void lmc_initcsrs(lmc_softc_t * const sc, lmc_csrptr_t csr_base, /*fold00
     lmc_trace(sc->lmc_device, "lmc_initcsrs out");
 }
 
-static void lmc_driver_timeout(struct net_device *dev) { /*fold00*/
-    lmc_softc_t *sc;
+static void lmc_driver_timeout(struct net_device *dev)
+{
+    lmc_softc_t *sc = dev_to_sc(dev);
     u32 csr6;
     unsigned long flags;
 
     lmc_trace(dev, "lmc_driver_timeout in");
 
-    sc = dev->priv;
-
     spin_lock_irqsave(&sc->lmc_lock, flags);
 
     printk("%s: Xmitter busy|\n", dev->name);
 
-    sc->stats.tx_tbusy_calls++ ;
-    if (jiffies - dev->trans_start < TX_TIMEOUT) {
-        goto bug_out;
-    }
+    sc->extra_stats.tx_tbusy_calls++;
+    if (jiffies - dev->trans_start < TX_TIMEOUT)
+	    goto bug_out;
 
     /*
      * Chip seems to have locked up
@@ -2178,7 +2094,7 @@ static void lmc_driver_timeout(struct net_device *dev) { /*fold00*/
 
     LMC_EVENT_LOG(LMC_EVENT_XMTPRCTMO,
                   LMC_CSR_READ (sc, csr_status),
-                  sc->stats.tx_ProcTimeout);
+		  sc->extra_stats.tx_ProcTimeout);
 
     lmc_running_reset (dev);
 
@@ -2195,8 +2111,8 @@ static void lmc_driver_timeout(struct net_device *dev) { /*fold00*/
     /* immediate transmit */
     LMC_CSR_WRITE (sc, csr_txpoll, 0);
 
-    sc->stats.tx_errors++;
-    sc->stats.tx_ProcTimeout++;	/* -baz */
+    sc->lmc_device->stats.tx_errors++;
+    sc->extra_stats.tx_ProcTimeout++; /* -baz */
 
     dev->trans_start = jiffies;
 
diff --git a/drivers/net/wan/lmc/lmc_media.c b/drivers/net/wan/lmc/lmc_media.c
index 8aa461c941ce..f327674fc93a 100644
--- a/drivers/net/wan/lmc/lmc_media.c
+++ b/drivers/net/wan/lmc/lmc_media.c
@@ -16,8 +16,6 @@
 #include <linux/inet.h>
 #include <linux/bitops.h>
 
-#include <net/syncppp.h>
-
 #include <asm/processor.h>             /* Processor type for cache alignment. */
 #include <asm/io.h>
 #include <asm/dma.h>
@@ -95,8 +93,7 @@ static void lmc_dummy_set_1 (lmc_softc_t * const, int);
 static void lmc_dummy_set2_1 (lmc_softc_t * const, lmc_ctl_t *);
 
 static inline void write_av9110_bit (lmc_softc_t *, int);
-static void write_av9110 (lmc_softc_t *, u_int32_t, u_int32_t, u_int32_t,
-			  u_int32_t, u_int32_t);
+static void write_av9110(lmc_softc_t *, u32, u32, u32, u32, u32);
 
 lmc_media_t lmc_ds3_media = {
   lmc_ds3_init,			/* special media init stuff */
@@ -427,7 +424,7 @@ lmc_ds3_set_scram (lmc_softc_t * const sc, int ie)
 static int
 lmc_ds3_get_link_status (lmc_softc_t * const sc)
 {
-    u_int16_t link_status, link_status_11;
+    u16 link_status, link_status_11;
     int ret = 1;
 
     lmc_mii_writereg (sc, 0, 17, 7);
@@ -449,7 +446,7 @@ lmc_ds3_get_link_status (lmc_softc_t * const sc)
         (link_status & LMC_FRAMER_REG0_OOFS)){
         ret = 0;
         if(sc->last_led_err[3] != 1){
-            u16 r1;
+	    u16 r1;
             lmc_mii_writereg (sc, 0, 17, 01); /* Turn on Xbit error as our cisco does */
             r1 = lmc_mii_readreg (sc, 0, 18);
             r1 &= 0xfe;
@@ -462,7 +459,7 @@ lmc_ds3_get_link_status (lmc_softc_t * const sc)
     else {
         lmc_led_off(sc, LMC_DS3_LED3);	/* turn on red LED */
         if(sc->last_led_err[3] == 1){
-            u16 r1;
+	    u16 r1;
             lmc_mii_writereg (sc, 0, 17, 01); /* Turn off Xbit error */
             r1 = lmc_mii_readreg (sc, 0, 18);
             r1 |= 0x01;
@@ -540,20 +537,19 @@ lmc_ds3_watchdog (lmc_softc_t * const sc)
  *  SSI methods
  */
 
-static void
-lmc_ssi_init (lmc_softc_t * const sc)
+static void lmc_ssi_init(lmc_softc_t * const sc)
 {
-  u_int16_t mii17;
-  int cable;
+	u16 mii17;
+	int cable;
 
-  sc->ictl.cardtype = LMC_CTL_CARDTYPE_LMC1000;
+	sc->ictl.cardtype = LMC_CTL_CARDTYPE_LMC1000;
 
-  mii17 = lmc_mii_readreg (sc, 0, 17);
+	mii17 = lmc_mii_readreg(sc, 0, 17);
 
-  cable = (mii17 & LMC_MII17_SSI_CABLE_MASK) >> LMC_MII17_SSI_CABLE_SHIFT;
-  sc->ictl.cable_type = cable;
+	cable = (mii17 & LMC_MII17_SSI_CABLE_MASK) >> LMC_MII17_SSI_CABLE_SHIFT;
+	sc->ictl.cable_type = cable;
 
-  lmc_gpio_mkoutput (sc, LMC_GEP_SSI_TXCLOCK);
+	lmc_gpio_mkoutput(sc, LMC_GEP_SSI_TXCLOCK);
 }
 
 static void
@@ -681,11 +677,11 @@ lmc_ssi_set_speed (lmc_softc_t * const sc, lmc_ctl_t * ctl)
 static int
 lmc_ssi_get_link_status (lmc_softc_t * const sc)
 {
-  u_int16_t link_status;
-  u_int32_t ticks;
+  u16 link_status;
+  u32 ticks;
   int ret = 1;
   int hw_hdsk = 1;
-  
+
   /*
    * missing CTS?  Hmm.  If we require CTS on, we may never get the
    * link to come up, so omit it in this test.
@@ -720,9 +716,9 @@ lmc_ssi_get_link_status (lmc_softc_t * const sc)
   }
   else if (ticks == 0 ) {				/* no clock found ? */
       ret = 0;
-      if(sc->last_led_err[3] != 1){
-          sc->stats.tx_lossOfClockCnt++;
-          printk(KERN_WARNING "%s: Lost Clock, Link Down\n", sc->name);
+      if (sc->last_led_err[3] != 1) {
+	      sc->extra_stats.tx_lossOfClockCnt++;
+	      printk(KERN_WARNING "%s: Lost Clock, Link Down\n", sc->name);
       }
       sc->last_led_err[3] = 1;
       lmc_led_on (sc, LMC_MII16_LED3);	/* turn ON red LED */
@@ -838,9 +834,7 @@ write_av9110_bit (lmc_softc_t * sc, int c)
   LMC_CSR_WRITE (sc, csr_gp, sc->lmc_gpio);
 }
 
-static void
-write_av9110 (lmc_softc_t * sc, u_int32_t n, u_int32_t m, u_int32_t v,
-	      u_int32_t x, u_int32_t r)
+static void write_av9110(lmc_softc_t *sc, u32 n, u32 m, u32 v, u32 x, u32 r)
 {
   int i;
 
@@ -887,19 +881,13 @@ write_av9110 (lmc_softc_t * sc, u_int32_t n, u_int32_t m, u_int32_t v,
 		     | LMC_GEP_SSI_GENERATOR));
 }
 
-static void
-lmc_ssi_watchdog (lmc_softc_t * const sc)
+static void lmc_ssi_watchdog(lmc_softc_t * const sc)
 {
-  u_int16_t mii17 = lmc_mii_readreg (sc, 0, 17);
-  if (((mii17 >> 3) & 7) == 7)
-    {
-      lmc_led_off (sc, LMC_MII16_LED2);
-    }
-  else
-    {
-      lmc_led_on (sc, LMC_MII16_LED2);
-    }
-
+	u16 mii17 = lmc_mii_readreg(sc, 0, 17);
+	if (((mii17 >> 3) & 7) == 7)
+		lmc_led_off(sc, LMC_MII16_LED2);
+	else
+		lmc_led_on(sc, LMC_MII16_LED2);
 }
 
 /*
@@ -929,7 +917,7 @@ lmc_t1_read (lmc_softc_t * const sc, int a)
 static void
 lmc_t1_init (lmc_softc_t * const sc)
 {
-  u_int16_t mii16;
+  u16 mii16;
   int i;
 
   sc->ictl.cardtype = LMC_CTL_CARDTYPE_LMC1200;
@@ -1028,7 +1016,7 @@ lmc_t1_set_status (lmc_softc_t * const sc, lmc_ctl_t * ctl)
  */ static int
 lmc_t1_get_link_status (lmc_softc_t * const sc)
 {
-    u_int16_t link_status;
+    u16 link_status;
     int ret = 1;
 
   /* LMC5245 (DS3) & LMC1200 (DS1) LED definitions
diff --git a/drivers/net/wan/lmc/lmc_proto.c b/drivers/net/wan/lmc/lmc_proto.c
index 85315758198d..be9877ff551e 100644
--- a/drivers/net/wan/lmc/lmc_proto.c
+++ b/drivers/net/wan/lmc/lmc_proto.c
@@ -36,9 +36,6 @@
 #include <linux/workqueue.h>
 #include <linux/proc_fs.h>
 #include <linux/bitops.h>
-
-#include <net/syncppp.h>
-
 #include <asm/processor.h>             /* Processor type for cache alignment. */
 #include <asm/io.h>
 #include <asm/dma.h>
@@ -50,48 +47,6 @@
 #include "lmc_ioctl.h"
 #include "lmc_proto.h"
 
-/*
- * The compile-time variable SPPPSTUP causes the module to be
- * compiled without referencing any of the sync ppp routines.
- */
-#ifdef SPPPSTUB
-#define SPPP_detach(d)	(void)0
-#define SPPP_open(d)	0
-#define SPPP_reopen(d)	(void)0
-#define SPPP_close(d)	(void)0
-#define SPPP_attach(d)	(void)0
-#define SPPP_do_ioctl(d,i,c)	-EOPNOTSUPP
-#else
-#define SPPP_attach(x)	sppp_attach((x)->pd)
-#define SPPP_detach(x)	sppp_detach((x)->pd->dev)
-#define SPPP_open(x)	sppp_open((x)->pd->dev)
-#define SPPP_reopen(x)	sppp_reopen((x)->pd->dev)
-#define SPPP_close(x)	sppp_close((x)->pd->dev)
-#define SPPP_do_ioctl(x, y, z)	sppp_do_ioctl((x)->pd->dev, (y), (z))
-#endif
-
-// init
-void lmc_proto_init(lmc_softc_t *sc) /*FOLD00*/
-{
-    lmc_trace(sc->lmc_device, "lmc_proto_init in");
-    switch(sc->if_type){
-    case LMC_PPP:
-        sc->pd = kmalloc(sizeof(struct ppp_device), GFP_KERNEL);
-	if (!sc->pd) {
-		printk("lmc_proto_init(): kmalloc failure!\n");
-		return;
-	}
-        sc->pd->dev = sc->lmc_device;
-        sc->if_ptr = sc->pd;
-        break;
-    case LMC_RAW:
-        break;
-    default:
-        break;
-    }
-    lmc_trace(sc->lmc_device, "lmc_proto_init out");
-}
-
 // attach
 void lmc_proto_attach(lmc_softc_t *sc) /*FOLD00*/
 {
@@ -100,7 +55,6 @@ void lmc_proto_attach(lmc_softc_t *sc) /*FOLD00*/
     case LMC_PPP:
         {
             struct net_device *dev = sc->lmc_device;
-            SPPP_attach(sc);
             dev->do_ioctl = lmc_ioctl;
         }
         break;
@@ -108,7 +62,7 @@ void lmc_proto_attach(lmc_softc_t *sc) /*FOLD00*/
         {
             struct net_device *dev = sc->lmc_device;
             /*
-             * They set a few basics because they don't use sync_ppp
+	     * They set a few basics because they don't use HDLC
              */
             dev->flags |= IFF_POINTOPOINT;
 
@@ -124,88 +78,39 @@ void lmc_proto_attach(lmc_softc_t *sc) /*FOLD00*/
     lmc_trace(sc->lmc_device, "lmc_proto_attach out");
 }
 
-// detach
-void lmc_proto_detach(lmc_softc_t *sc) /*FOLD00*/
+int lmc_proto_ioctl(lmc_softc_t *sc, struct ifreq *ifr, int cmd)
 {
-    switch(sc->if_type){
-    case LMC_PPP:
-        SPPP_detach(sc);
-        break;
-    case LMC_RAW: /* Tell someone we're detaching? */
-        break;
-    default:
-        break;
-    }
-
+	lmc_trace(sc->lmc_device, "lmc_proto_ioctl");
+	if (sc->if_type == LMC_PPP)
+		return hdlc_ioctl(sc->lmc_device, ifr, cmd);
+	return -EOPNOTSUPP;
 }
 
-// reopen
-void lmc_proto_reopen(lmc_softc_t *sc) /*FOLD00*/
+int lmc_proto_open(lmc_softc_t *sc)
 {
-    lmc_trace(sc->lmc_device, "lmc_proto_reopen in");
-    switch(sc->if_type){
-    case LMC_PPP:
-        SPPP_reopen(sc);
-        break;
-    case LMC_RAW: /* Reset the interface after being down, prerape to receive packets again */
-        break;
-    default:
-        break;
-    }
-    lmc_trace(sc->lmc_device, "lmc_proto_reopen out");
-}
+	int ret = 0;
 
+	lmc_trace(sc->lmc_device, "lmc_proto_open in");
 
-// ioctl
-int lmc_proto_ioctl(lmc_softc_t *sc, struct ifreq *ifr, int cmd) /*FOLD00*/
-{
-    lmc_trace(sc->lmc_device, "lmc_proto_ioctl out");
-    switch(sc->if_type){
-    case LMC_PPP:
-        return SPPP_do_ioctl (sc, ifr, cmd);
-        break;
-    default:
-        return -EOPNOTSUPP;
-        break;
-    }
-    lmc_trace(sc->lmc_device, "lmc_proto_ioctl out");
+	if (sc->if_type == LMC_PPP) {
+		ret = hdlc_open(sc->lmc_device);
+		if (ret < 0)
+			printk(KERN_WARNING "%s: HDLC open failed: %d\n",
+			       sc->name, ret);
+	}
+
+	lmc_trace(sc->lmc_device, "lmc_proto_open out");
+	return ret;
 }
 
-// open
-void lmc_proto_open(lmc_softc_t *sc) /*FOLD00*/
+void lmc_proto_close(lmc_softc_t *sc)
 {
-    int ret;
+	lmc_trace(sc->lmc_device, "lmc_proto_close in");
 
-    lmc_trace(sc->lmc_device, "lmc_proto_open in");
-    switch(sc->if_type){
-    case LMC_PPP:
-        ret = SPPP_open(sc);
-        if(ret < 0)
-            printk("%s: syncPPP open failed: %d\n", sc->name, ret);
-        break;
-    case LMC_RAW: /* We're about to start getting packets! */
-        break;
-    default:
-        break;
-    }
-    lmc_trace(sc->lmc_device, "lmc_proto_open out");
-}
-
-// close
+	if (sc->if_type == LMC_PPP)
+		hdlc_close(sc->lmc_device);
 
-void lmc_proto_close(lmc_softc_t *sc) /*FOLD00*/
-{
-    lmc_trace(sc->lmc_device, "lmc_proto_close in");
-    switch(sc->if_type){
-    case LMC_PPP:
-        SPPP_close(sc);
-        break;
-    case LMC_RAW: /* Interface going down */
-        break;
-    default:
-        break;
-    }
-    lmc_trace(sc->lmc_device, "lmc_proto_close out");
+	lmc_trace(sc->lmc_device, "lmc_proto_close out");
 }
 
 __be16 lmc_proto_type(lmc_softc_t *sc, struct sk_buff *skb) /*FOLD00*/
@@ -213,8 +118,8 @@ __be16 lmc_proto_type(lmc_softc_t *sc, struct sk_buff *skb) /*FOLD00*/
     lmc_trace(sc->lmc_device, "lmc_proto_type in");
     switch(sc->if_type){
     case LMC_PPP:
-        return htons(ETH_P_WAN_PPP);
-        break;
+	    return hdlc_type_trans(skb, sc->lmc_device);
+	    break;
     case LMC_NET:
         return htons(ETH_P_802_2);
         break;
@@ -245,4 +150,3 @@ void lmc_proto_netif(lmc_softc_t *sc, struct sk_buff *skb) /*FOLD00*/
     }
     lmc_trace(sc->lmc_device, "lmc_proto_netif out");
 }
-
diff --git a/drivers/net/wan/lmc/lmc_proto.h b/drivers/net/wan/lmc/lmc_proto.h
index ccaa69e8b3c7..662148c54644 100644
--- a/drivers/net/wan/lmc/lmc_proto.h
+++ b/drivers/net/wan/lmc/lmc_proto.h
@@ -1,16 +1,18 @@
 #ifndef _LMC_PROTO_H_
 #define _LMC_PROTO_H_
 
-void lmc_proto_init(lmc_softc_t *sc);
+#include <linux/hdlc.h>
+
 void lmc_proto_attach(lmc_softc_t *sc);
-void lmc_proto_detach(lmc_softc_t *sc);
-void lmc_proto_reopen(lmc_softc_t *sc);
 int lmc_proto_ioctl(lmc_softc_t *sc, struct ifreq *ifr, int cmd);
-void lmc_proto_open(lmc_softc_t *sc);
+int lmc_proto_open(lmc_softc_t *sc);
 void lmc_proto_close(lmc_softc_t *sc);
 __be16 lmc_proto_type(lmc_softc_t *sc, struct sk_buff *skb);
 void lmc_proto_netif(lmc_softc_t *sc, struct sk_buff *skb);
-int lmc_skb_rawpackets(char *buf, char **start, off_t offset, int len, int unused);
 
-#endif
+static inline lmc_softc_t* dev_to_sc(struct net_device *dev)
+{
+	return (lmc_softc_t *)dev_to_hdlc(dev)->priv;
+}
 
+#endif
diff --git a/drivers/net/wan/lmc/lmc_var.h b/drivers/net/wan/lmc/lmc_var.h
index 6d003a39bfad..65d01978e784 100644
--- a/drivers/net/wan/lmc/lmc_var.h
+++ b/drivers/net/wan/lmc/lmc_var.h
@@ -1,8 +1,6 @@
 #ifndef _LMC_VAR_H_
 #define _LMC_VAR_H_
 
-/* $Id: lmc_var.h,v 1.17 2000/04/06 12:16:47 asj Exp $ */
-
  /*
   * Copyright (c) 1997-2000 LAN Media Corporation (LMC)
   * All rights reserved.  www.lanmedia.com
@@ -19,23 +17,6 @@
 
 #include <linux/timer.h>
 
-#ifndef __KERNEL__
-typedef signed char s8;
-typedef unsigned char u8;
-
-typedef signed short s16;
-typedef unsigned short u16;
-
-typedef signed int s32;
-typedef unsigned int u32;
-
-typedef signed long long s64;
-typedef unsigned long long u64;
-
-#define BITS_PER_LONG 32 
-
-#endif
-
 /*
  * basic definitions used in lmc include files
  */
@@ -45,9 +26,6 @@ typedef struct lmc___media lmc_media_t;
 typedef struct lmc___ctl lmc_ctl_t;
 
 #define lmc_csrptr_t    unsigned long
-#define u_int16_t	u16
-#define u_int8_t	u8
-#define tulip_uint32_t	u32
 
 #define LMC_REG_RANGE 0x80
 
@@ -122,45 +100,45 @@ struct lmc_regfile_t {
  *  used to define bits in the second tulip_desc_t field (length)
  *  for the transmit descriptor -baz */
 
-#define LMC_TDES_FIRST_BUFFER_SIZE       ((u_int32_t)(0x000007FF))
-#define LMC_TDES_SECOND_BUFFER_SIZE      ((u_int32_t)(0x003FF800))
-#define LMC_TDES_HASH_FILTERING          ((u_int32_t)(0x00400000))
-#define LMC_TDES_DISABLE_PADDING         ((u_int32_t)(0x00800000))
-#define LMC_TDES_SECOND_ADDR_CHAINED     ((u_int32_t)(0x01000000))
-#define LMC_TDES_END_OF_RING             ((u_int32_t)(0x02000000))
-#define LMC_TDES_ADD_CRC_DISABLE         ((u_int32_t)(0x04000000))
-#define LMC_TDES_SETUP_PACKET            ((u_int32_t)(0x08000000))
-#define LMC_TDES_INVERSE_FILTERING       ((u_int32_t)(0x10000000))
-#define LMC_TDES_FIRST_SEGMENT           ((u_int32_t)(0x20000000))
-#define LMC_TDES_LAST_SEGMENT            ((u_int32_t)(0x40000000))
-#define LMC_TDES_INTERRUPT_ON_COMPLETION ((u_int32_t)(0x80000000))
+#define LMC_TDES_FIRST_BUFFER_SIZE       ((u32)(0x000007FF))
+#define LMC_TDES_SECOND_BUFFER_SIZE      ((u32)(0x003FF800))
+#define LMC_TDES_HASH_FILTERING          ((u32)(0x00400000))
+#define LMC_TDES_DISABLE_PADDING         ((u32)(0x00800000))
+#define LMC_TDES_SECOND_ADDR_CHAINED     ((u32)(0x01000000))
+#define LMC_TDES_END_OF_RING             ((u32)(0x02000000))
+#define LMC_TDES_ADD_CRC_DISABLE         ((u32)(0x04000000))
+#define LMC_TDES_SETUP_PACKET            ((u32)(0x08000000))
+#define LMC_TDES_INVERSE_FILTERING       ((u32)(0x10000000))
+#define LMC_TDES_FIRST_SEGMENT           ((u32)(0x20000000))
+#define LMC_TDES_LAST_SEGMENT            ((u32)(0x40000000))
+#define LMC_TDES_INTERRUPT_ON_COMPLETION ((u32)(0x80000000))
 
 #define TDES_SECOND_BUFFER_SIZE_BIT_NUMBER  11
 #define TDES_COLLISION_COUNT_BIT_NUMBER     3
 
 /* Constants for the RCV descriptor RDES */
 
-#define LMC_RDES_OVERFLOW             ((u_int32_t)(0x00000001))
-#define LMC_RDES_CRC_ERROR            ((u_int32_t)(0x00000002))
-#define LMC_RDES_DRIBBLING_BIT            ((u_int32_t)(0x00000004))
-#define LMC_RDES_REPORT_ON_MII_ERR    ((u_int32_t)(0x00000008))
-#define LMC_RDES_RCV_WATCHDOG_TIMEOUT ((u_int32_t)(0x00000010))
-#define LMC_RDES_FRAME_TYPE           ((u_int32_t)(0x00000020))
-#define LMC_RDES_COLLISION_SEEN       ((u_int32_t)(0x00000040))
-#define LMC_RDES_FRAME_TOO_LONG       ((u_int32_t)(0x00000080))
-#define LMC_RDES_LAST_DESCRIPTOR      ((u_int32_t)(0x00000100))
-#define LMC_RDES_FIRST_DESCRIPTOR     ((u_int32_t)(0x00000200))
-#define LMC_RDES_MULTICAST_FRAME      ((u_int32_t)(0x00000400))
-#define LMC_RDES_RUNT_FRAME           ((u_int32_t)(0x00000800))
-#define LMC_RDES_DATA_TYPE            ((u_int32_t)(0x00003000))
-#define LMC_RDES_LENGTH_ERROR         ((u_int32_t)(0x00004000))
-#define LMC_RDES_ERROR_SUMMARY        ((u_int32_t)(0x00008000))
-#define LMC_RDES_FRAME_LENGTH         ((u_int32_t)(0x3FFF0000))
-#define LMC_RDES_OWN_BIT              ((u_int32_t)(0x80000000))
+#define LMC_RDES_OVERFLOW             ((u32)(0x00000001))
+#define LMC_RDES_CRC_ERROR            ((u32)(0x00000002))
+#define LMC_RDES_DRIBBLING_BIT        ((u32)(0x00000004))
+#define LMC_RDES_REPORT_ON_MII_ERR    ((u32)(0x00000008))
+#define LMC_RDES_RCV_WATCHDOG_TIMEOUT ((u32)(0x00000010))
+#define LMC_RDES_FRAME_TYPE           ((u32)(0x00000020))
+#define LMC_RDES_COLLISION_SEEN       ((u32)(0x00000040))
+#define LMC_RDES_FRAME_TOO_LONG       ((u32)(0x00000080))
+#define LMC_RDES_LAST_DESCRIPTOR      ((u32)(0x00000100))
+#define LMC_RDES_FIRST_DESCRIPTOR     ((u32)(0x00000200))
+#define LMC_RDES_MULTICAST_FRAME      ((u32)(0x00000400))
+#define LMC_RDES_RUNT_FRAME           ((u32)(0x00000800))
+#define LMC_RDES_DATA_TYPE            ((u32)(0x00003000))
+#define LMC_RDES_LENGTH_ERROR         ((u32)(0x00004000))
+#define LMC_RDES_ERROR_SUMMARY        ((u32)(0x00008000))
+#define LMC_RDES_FRAME_LENGTH         ((u32)(0x3FFF0000))
+#define LMC_RDES_OWN_BIT              ((u32)(0x80000000))
 
 #define RDES_FRAME_LENGTH_BIT_NUMBER       16
 
-#define LMC_RDES_ERROR_MASK ( (u_int32_t)( \
+#define LMC_RDES_ERROR_MASK ( (u32)( \
 	  LMC_RDES_OVERFLOW \
 	| LMC_RDES_DRIBBLING_BIT \
 	| LMC_RDES_REPORT_ON_MII_ERR \
@@ -172,32 +150,32 @@ struct lmc_regfile_t {
  */
 
 typedef struct {
-	u_int32_t	n;
-	u_int32_t	m;
-	u_int32_t	v;
-	u_int32_t	x;
-	u_int32_t	r;
-	u_int32_t	f;
-	u_int32_t	exact;
+	u32	n;
+	u32	m;
+	u32	v;
+	u32	x;
+	u32	r;
+	u32	f;
+	u32	exact;
 } lmc_av9110_t;
 
 /*
  * Common structure passed to the ioctl code.
  */
 struct lmc___ctl {
-	u_int32_t	cardtype;
-	u_int32_t	clock_source;		/* HSSI, T1 */
-	u_int32_t	clock_rate;		/* T1 */
-	u_int32_t	crc_length;
-	u_int32_t	cable_length;		/* DS3 */
-	u_int32_t	scrambler_onoff;	/* DS3 */
-	u_int32_t	cable_type;		/* T1 */
-	u_int32_t	keepalive_onoff;	/* protocol */
-	u_int32_t	ticks;			/* ticks/sec */
+	u32	cardtype;
+	u32	clock_source;		/* HSSI, T1 */
+	u32	clock_rate;		/* T1 */
+	u32	crc_length;
+	u32	cable_length;		/* DS3 */
+	u32	scrambler_onoff;	/* DS3 */
+	u32	cable_type;		/* T1 */
+	u32	keepalive_onoff;	/* protocol */
+	u32	ticks;			/* ticks/sec */
 	union {
 		lmc_av9110_t	ssi;
 	} cardspec;
-	u_int32_t       circuit_type;   /* T1 or E1 */
+	u32       circuit_type;   /* T1 or E1 */
 };
 
 
@@ -244,108 +222,69 @@ struct lmc___media {
 
 #define STATCHECK     0xBEEFCAFE
 
-/*  Included in this structure are first
- *   - standard net_device_stats
- *   - some other counters used for debug and driver performance
- *  evaluation -baz
- */
-struct lmc_statistics
+struct lmc_extra_statistics
 {
-        unsigned long     rx_packets;             /* total packets received       */
-        unsigned long     tx_packets;             /* total packets transmitted    */
-	unsigned long     rx_bytes;
-        unsigned long     tx_bytes;
-        
-        unsigned long     rx_errors;              /* bad packets received         */
-        unsigned long     tx_errors;              /* packet transmit problems     */
-        unsigned long     rx_dropped;             /* no space in linux buffers    */
-        unsigned long     tx_dropped;             /* no space available in linux  */
-        unsigned long     multicast;              /* multicast packets received   */
-        unsigned long     collisions;
-
-        /* detailed rx_errors: */
-        unsigned long     rx_length_errors;
-        unsigned long     rx_over_errors;         /* receiver ring buff overflow  */
-        unsigned long     rx_crc_errors;          /* recved pkt with crc error    */
-        unsigned long     rx_frame_errors;        /* recv'd frame alignment error */
-        unsigned long     rx_fifo_errors;         /* recv'r fifo overrun          */
-        unsigned long     rx_missed_errors;       /* receiver missed packet       */
-
-        /* detailed tx_errors */
-        unsigned long     tx_aborted_errors;
-        unsigned long     tx_carrier_errors;
-        unsigned long     tx_fifo_errors;
-        unsigned long     tx_heartbeat_errors;
-        unsigned long     tx_window_errors;
-
-        /* for cslip etc */
-        unsigned long rx_compressed;
-        unsigned long tx_compressed;
-
-        /* -------------------------------------
-         * Custom stats & counters follow -baz */
-        u_int32_t       version_size;
-        u_int32_t       lmc_cardtype;
-
-        u_int32_t       tx_ProcTimeout;
-        u_int32_t       tx_IntTimeout;
-        u_int32_t       tx_NoCompleteCnt;
-        u_int32_t       tx_MaxXmtsB4Int;
-        u_int32_t       tx_TimeoutCnt;
-        u_int32_t       tx_OutOfSyncPtr;
-        u_int32_t       tx_tbusy0;
-        u_int32_t       tx_tbusy1;
-        u_int32_t       tx_tbusy_calls;
-        u_int32_t       resetCount;
-        u_int32_t       lmc_txfull;
-        u_int32_t       tbusy;
-        u_int32_t       dirtyTx;
-        u_int32_t       lmc_next_tx;
-        u_int32_t       otherTypeCnt;
-        u_int32_t       lastType;
-        u_int32_t       lastTypeOK;
-        u_int32_t       txLoopCnt;
-        u_int32_t       usedXmtDescripCnt;
-        u_int32_t       txIndexCnt;
-        u_int32_t       rxIntLoopCnt;
-
-        u_int32_t       rx_SmallPktCnt;
-        u_int32_t       rx_BadPktSurgeCnt;
-        u_int32_t       rx_BuffAllocErr;
-        u_int32_t       tx_lossOfClockCnt;
-
-        /* T1 error counters */
-        u_int32_t       framingBitErrorCount;
-        u_int32_t       lineCodeViolationCount;
-
-        u_int32_t       lossOfFrameCount;
-        u_int32_t       changeOfFrameAlignmentCount;
-        u_int32_t       severelyErroredFrameCount;
-
-        u_int32_t       check;
+	u32       version_size;
+	u32       lmc_cardtype;
+
+	u32       tx_ProcTimeout;
+	u32       tx_IntTimeout;
+	u32       tx_NoCompleteCnt;
+	u32       tx_MaxXmtsB4Int;
+	u32       tx_TimeoutCnt;
+	u32       tx_OutOfSyncPtr;
+	u32       tx_tbusy0;
+	u32       tx_tbusy1;
+	u32       tx_tbusy_calls;
+	u32       resetCount;
+	u32       lmc_txfull;
+	u32       tbusy;
+	u32       dirtyTx;
+	u32       lmc_next_tx;
+	u32       otherTypeCnt;
+	u32       lastType;
+	u32       lastTypeOK;
+	u32       txLoopCnt;
+	u32       usedXmtDescripCnt;
+	u32       txIndexCnt;
+	u32       rxIntLoopCnt;
+
+	u32       rx_SmallPktCnt;
+	u32       rx_BadPktSurgeCnt;
+	u32       rx_BuffAllocErr;
+	u32       tx_lossOfClockCnt;
+
+	/* T1 error counters */
+	u32       framingBitErrorCount;
+	u32       lineCodeViolationCount;
+
+	u32       lossOfFrameCount;
+	u32       changeOfFrameAlignmentCount;
+	u32       severelyErroredFrameCount;
+
+	u32       check;
 };
 
-
 typedef struct lmc_xinfo {
-        u_int32_t       Magic0;                         /* BEEFCAFE */
+	u32       Magic0;                         /* BEEFCAFE */
 
-        u_int32_t       PciCardType;
-        u_int32_t       PciSlotNumber;          /* PCI slot number       */
+	u32       PciCardType;
+	u32       PciSlotNumber;          /* PCI slot number       */
 
-        u_int16_t       DriverMajorVersion;
-        u_int16_t       DriverMinorVersion;
-        u_int16_t       DriverSubVersion;
+	u16	       DriverMajorVersion;
+	u16	       DriverMinorVersion;
+	u16	       DriverSubVersion;
 
-        u_int16_t       XilinxRevisionNumber;
-        u_int16_t       MaxFrameSize;
+	u16	       XilinxRevisionNumber;
+	u16	       MaxFrameSize;
 
-        u_int16_t       t1_alarm1_status;
-        u_int16_t       t1_alarm2_status;
+	u16     	  t1_alarm1_status;
+	u16       	t1_alarm2_status;
 
-        int                     link_status;
-        u_int32_t       mii_reg16;
+	int             link_status;
+	u32       mii_reg16;
 
-        u_int32_t       Magic1;                         /* DEADBEEF */
+	u32       Magic1;                         /* DEADBEEF */
 } LMC_XINFO;
 
 
@@ -353,23 +292,22 @@ typedef struct lmc_xinfo {
  * forward decl
  */
 struct lmc___softc {
-        void *if_ptr;   /* General purpose pointer (used by SPPP) */
 	char                   *name;
 	u8			board_idx;
-	struct lmc_statistics   stats;
-	struct net_device          *lmc_device;
+	struct lmc_extra_statistics extra_stats;
+	struct net_device      *lmc_device;
 
 	int                     hang, rxdesc, bad_packet, some_counter;
-	u_int32_t               txgo;
+	u32  	         	txgo;
 	struct lmc_regfile_t	lmc_csrs;
-	volatile u_int32_t	lmc_txtick;
-	volatile u_int32_t	lmc_rxtick;
-	u_int32_t		lmc_flags;
-	u_int32_t		lmc_intrmask;	/* our copy of csr_intr */
-	u_int32_t		lmc_cmdmode;	/* our copy of csr_cmdmode */
-	u_int32_t		lmc_busmode;	/* our copy of csr_busmode */
-	u_int32_t		lmc_gpio_io;	/* state of in/out settings */
-	u_int32_t		lmc_gpio;	/* state of outputs */
+	volatile u32		lmc_txtick;
+	volatile u32		lmc_rxtick;
+	u32			lmc_flags;
+	u32			lmc_intrmask;	/* our copy of csr_intr */
+	u32			lmc_cmdmode;	/* our copy of csr_cmdmode */
+	u32			lmc_busmode;	/* our copy of csr_busmode */
+	u32			lmc_gpio_io;	/* state of in/out settings */
+	u32			lmc_gpio;	/* state of outputs */
 	struct sk_buff*		lmc_txq[LMC_TXDESCS];
 	struct sk_buff*		lmc_rxq[LMC_RXDESCS];
 	volatile
@@ -381,42 +319,41 @@ struct lmc___softc {
 	unsigned int		lmc_taint_tx, lmc_taint_rx;
 	int			lmc_tx_start, lmc_txfull;
 	int			lmc_txbusy;
-	u_int16_t		lmc_miireg16;
+	u16			lmc_miireg16;
 	int			lmc_ok;
 	int			last_link_status;
 	int			lmc_cardtype;
-	u_int32_t               last_frameerr;
+	u32               	last_frameerr;
 	lmc_media_t	       *lmc_media;
 	struct timer_list	timer;
 	lmc_ctl_t		ictl;
-	u_int32_t		TxDescriptControlInit;  
+	u32			TxDescriptControlInit;
 
 	int                     tx_TimeoutInd; /* additional driver state */
 	int                     tx_TimeoutDisplay;
 	unsigned int		lastlmc_taint_tx;
 	int                     lasttx_packets;
-	u_int32_t		tx_clockState;
-	u_int32_t		lmc_crcSize;
-	LMC_XINFO		lmc_xinfo; 
+	u32			tx_clockState;
+	u32			lmc_crcSize;
+	LMC_XINFO		lmc_xinfo;
 	char                    lmc_yel, lmc_blue, lmc_red; /* for T1 and DS3 */
-        char                    lmc_timing; /* for HSSI and SSI */
-        int                     got_irq;
+	char                    lmc_timing; /* for HSSI and SSI */
+	int                     got_irq;
 
-        char                    last_led_err[4];
+	char                    last_led_err[4];
 
-        u32                     last_int;
-        u32                     num_int;
+	u32                     last_int;
+	u32                     num_int;
 
 	spinlock_t              lmc_lock;
-        u_int16_t               if_type;       /* PPP or NET */
-        struct ppp_device       *pd;
+	u16			if_type;       /* HDLC/PPP or NET */
 
-        /* Failure cases */
-        u8                       failed_ring;
-        u8                       failed_recv_alloc;
+	/* Failure cases */
+	u8			failed_ring;
+	u8			failed_recv_alloc;
 
-        /* Structure check */
-        u32                     check;
+	/* Structure check */
+	u32                     check;
 };
 
 #define LMC_PCI_TIME 1
@@ -512,8 +449,8 @@ struct lmc___softc {
   | TULIP_STS_TXUNDERFLOW\
   | TULIP_STS_RXSTOPPED )
 
-#define DESC_OWNED_BY_SYSTEM   ((u_int32_t)(0x00000000))
-#define DESC_OWNED_BY_DC21X4   ((u_int32_t)(0x80000000))
+#define DESC_OWNED_BY_SYSTEM   ((u32)(0x00000000))
+#define DESC_OWNED_BY_DC21X4   ((u32)(0x80000000))
 
 #ifndef TULIP_CMD_RECEIVEALL
 #define TULIP_CMD_RECEIVEALL 0x40000000L
@@ -525,46 +462,9 @@ struct lmc___softc {
 #define LMC_ADAP_SSI            4
 #define LMC_ADAP_T1             5
 
-#define HDLC_HDR_LEN  4
-#define HDLC_ADDR_LEN 1
-#define HDLC_SLARP    0x8035
 #define LMC_MTU 1500
-#define SLARP_LINECHECK 2
 
 #define LMC_CRC_LEN_16 2  /* 16-bit CRC */
 #define LMC_CRC_LEN_32 4
 
-#ifdef LMC_HDLC
-/* definition of an hdlc header. */
-struct hdlc_hdr
-{
-	u8  address;
-	u8  control;
-	u16 type;
-};
-
-/* definition of a slarp header. */
-struct slarp
-{
-	long code;
-	union sl
-	{
-		struct
-		{
-			ulong address;
-			ulong mask;
-			ushort unused;
-		} add;
-		struct
-		{
-			ulong mysequence;
-			ulong yoursequence;
-			ushort reliability;
-			ulong time;
-		} chk;
-	} t;
-};
-#endif /* LMC_HDLC */
-
-
 #endif /* _LMC_VAR_H_ */
diff --git a/drivers/net/wan/pc300.h b/drivers/net/wan/pc300.h
index 63e9fcf31fb8..2e4f84f6cad4 100644
--- a/drivers/net/wan/pc300.h
+++ b/drivers/net/wan/pc300.h
@@ -100,31 +100,14 @@
 #define	_PC300_H
 
 #include <linux/hdlc.h>
-#include <net/syncppp.h>
 #include "hd64572.h"
 #include "pc300-falc-lh.h"
 
-#ifndef CY_TYPES
-#define CY_TYPES
-typedef	__u64	ucdouble;	/* 64 bits, unsigned */
-typedef	__u32	uclong;		/* 32 bits, unsigned */
-typedef	__u16	ucshort;	/* 16 bits, unsigned */
-typedef	__u8	ucchar;		/* 8 bits, unsigned */
-#endif /* CY_TYPES */
+#define PC300_PROTO_MLPPP 1
 
-#define PC300_PROTO_MLPPP 1		
-
-#define PC300_KERNEL	"2.4.x"	/* Kernel supported by this driver */
-
-#define	PC300_DEVNAME	"hdlc"	/* Dev. name base (for hdlc0, hdlc1, etc.) */
-#define PC300_MAXINDEX	100	/* Max dev. name index (the '0' in hdlc0) */
-
-#define	PC300_MAXCARDS	4	/* Max number of cards per system */
 #define	PC300_MAXCHAN	2	/* Number of channels per card */
 
-#define	PC300_PLX_WIN	0x80    /* PLX control window size (128b) */
 #define	PC300_RAMSIZE	0x40000 /* RAM window size (256Kb) */
-#define	PC300_SCASIZE	0x400   /* SCA window size (1Kb) */
 #define	PC300_FALCSIZE	0x400	/* FALC window size (1Kb) */
 
 #define PC300_OSC_CLOCK	24576000
@@ -160,26 +143,14 @@ typedef	__u8	ucchar;		/* 8 bits, unsigned */
  * Memory access functions/macros      *
  * (required to support Alpha systems) *
  ***************************************/
-#ifdef __KERNEL__
-#define cpc_writeb(port,val)	{writeb((ucchar)(val),(port)); mb();}
+#define cpc_writeb(port,val)	{writeb((u8)(val),(port)); mb();}
 #define cpc_writew(port,val)	{writew((ushort)(val),(port)); mb();}
-#define cpc_writel(port,val)	{writel((uclong)(val),(port)); mb();}
+#define cpc_writel(port,val)	{writel((u32)(val),(port)); mb();}
 
 #define cpc_readb(port)		readb(port)
 #define cpc_readw(port)		readw(port)
 #define cpc_readl(port)		readl(port)
 
-#else /* __KERNEL__ */
-#define cpc_writeb(port,val)	(*(volatile ucchar *)(port) = (ucchar)(val))
-#define cpc_writew(port,val)	(*(volatile ucshort *)(port) = (ucshort)(val))
-#define cpc_writel(port,val)	(*(volatile uclong *)(port) = (uclong)(val))
-
-#define cpc_readb(port)		(*(volatile ucchar *)(port))
-#define cpc_readw(port)		(*(volatile ucshort *)(port))
-#define cpc_readl(port)		(*(volatile uclong *)(port))
-
-#endif /* __KERNEL__ */
-
 /****** Data Structures *****************************************************/
 
 /*
@@ -188,15 +159,15 @@ typedef	__u8	ucchar;		/* 8 bits, unsigned */
  *      (memory mapped).
  */
 struct RUNTIME_9050 {
-	uclong	loc_addr_range[4];	/* 00-0Ch : Local Address Ranges */
-	uclong	loc_rom_range;		/* 10h : Local ROM Range */
-	uclong	loc_addr_base[4];	/* 14-20h : Local Address Base Addrs */
-	uclong	loc_rom_base;		/* 24h : Local ROM Base */
-	uclong	loc_bus_descr[4];	/* 28-34h : Local Bus Descriptors */
-	uclong	rom_bus_descr;		/* 38h : ROM Bus Descriptor */
-	uclong	cs_base[4];		/* 3C-48h : Chip Select Base Addrs */
-	uclong	intr_ctrl_stat;		/* 4Ch : Interrupt Control/Status */
-	uclong	init_ctrl;		/* 50h : EEPROM ctrl, Init Ctrl, etc */
+	u32 loc_addr_range[4];	/* 00-0Ch : Local Address Ranges */
+	u32 loc_rom_range;	/* 10h : Local ROM Range */
+	u32 loc_addr_base[4];	/* 14-20h : Local Address Base Addrs */
+	u32 loc_rom_base;	/* 24h : Local ROM Base */
+	u32 loc_bus_descr[4];	/* 28-34h : Local Bus Descriptors */
+	u32 rom_bus_descr;	/* 38h : ROM Bus Descriptor */
+	u32 cs_base[4];		/* 3C-48h : Chip Select Base Addrs */
+	u32 intr_ctrl_stat;	/* 4Ch : Interrupt Control/Status */
+	u32 init_ctrl;		/* 50h : EEPROM ctrl, Init Ctrl, etc */
 };
 
 #define PLX_9050_LINT1_ENABLE	0x01
@@ -240,66 +211,66 @@ struct RUNTIME_9050 {
 #define PC300_FALC_MAXLOOP	0x0000ffff	/* for falc_issue_cmd() */
 
 typedef struct falc {
-	ucchar sync;		/* If true FALC is synchronized */
-	ucchar active;		/* if TRUE then already active */
-	ucchar loop_active;	/* if TRUE a line loopback UP was received */
-	ucchar loop_gen;	/* if TRUE a line loopback UP was issued */
+	u8 sync;	/* If true FALC is synchronized */
+	u8 active;	/* if TRUE then already active */
+	u8 loop_active;	/* if TRUE a line loopback UP was received */
+	u8 loop_gen;	/* if TRUE a line loopback UP was issued */
 
-	ucchar num_channels;
-	ucchar offset;		/* 1 for T1, 0 for E1 */
-	ucchar full_bandwidth;
+	u8 num_channels;
+	u8 offset;	/* 1 for T1, 0 for E1 */
+	u8 full_bandwidth;
 
-	ucchar xmb_cause;
-	ucchar multiframe_mode;
+	u8 xmb_cause;
+	u8 multiframe_mode;
 
 	/* Statistics */
-	ucshort pden;	/* Pulse Density violation count */
-	ucshort los;	/* Loss of Signal count */
-	ucshort losr;	/* Loss of Signal recovery count */
-	ucshort lfa;	/* Loss of frame alignment count */
-	ucshort farec;	/* Frame Alignment Recovery count */
-	ucshort lmfa;	/* Loss of multiframe alignment count */
-	ucshort ais;	/* Remote Alarm indication Signal count */
-	ucshort sec;	/* One-second timer */
-	ucshort es;	/* Errored second */
-	ucshort rai;	/* remote alarm received */
-	ucshort bec;
-	ucshort fec;
-	ucshort cvc;
-	ucshort cec;
-	ucshort ebc;
+	u16 pden;	/* Pulse Density violation count */
+	u16 los;	/* Loss of Signal count */
+	u16 losr;	/* Loss of Signal recovery count */
+	u16 lfa;	/* Loss of frame alignment count */
+	u16 farec;	/* Frame Alignment Recovery count */
+	u16 lmfa;	/* Loss of multiframe alignment count */
+	u16 ais;	/* Remote Alarm indication Signal count */
+	u16 sec;	/* One-second timer */
+	u16 es;		/* Errored second */
+	u16 rai;	/* remote alarm received */
+	u16 bec;
+	u16 fec;
+	u16 cvc;
+	u16 cec;
+	u16 ebc;
 
 	/* Status */
-	ucchar red_alarm;
-	ucchar blue_alarm;
-	ucchar loss_fa;
-	ucchar yellow_alarm;
-	ucchar loss_mfa;
-	ucchar prbs;
+	u8 red_alarm;
+	u8 blue_alarm;
+	u8 loss_fa;
+	u8 yellow_alarm;
+	u8 loss_mfa;
+	u8 prbs;
 } falc_t;
 
 typedef struct falc_status {
-	ucchar sync;  /* If true FALC is synchronized */
-	ucchar red_alarm;
-	ucchar blue_alarm;
-	ucchar loss_fa;
-	ucchar yellow_alarm;
-	ucchar loss_mfa;
-	ucchar prbs;
+	u8 sync;	/* If true FALC is synchronized */
+	u8 red_alarm;
+	u8 blue_alarm;
+	u8 loss_fa;
+	u8 yellow_alarm;
+	u8 loss_mfa;
+	u8 prbs;
 } falc_status_t;
 
 typedef struct rsv_x21_status {
-	ucchar dcd;
-	ucchar dsr;
-	ucchar cts;
-	ucchar rts;
-	ucchar dtr;
+	u8 dcd;
+	u8 dsr;
+	u8 cts;
+	u8 rts;
+	u8 dtr;
 } rsv_x21_status_t;
 
 typedef struct pc300stats {
 	int hw_type;
-	uclong line_on;
-	uclong line_off;
+	u32 line_on;
+	u32 line_off;
 	struct net_device_stats gen_stats;
 	falc_t te_stats;
 } pc300stats_t;
@@ -317,28 +288,19 @@ typedef struct pc300loopback {
 
 typedef struct pc300patterntst {
 	char patrntst_on;       /* 0 - off; 1 - on; 2 - read num_errors */
-	ucshort num_errors;
+	u16 num_errors;
 } pc300patterntst_t;
 
 typedef struct pc300dev {
-	void *if_ptr;		/* General purpose pointer */
 	struct pc300ch *chan;
-	ucchar trace_on;
-	uclong line_on;		/* DCD(X.21, RSV) / sync(TE) change counters */
-	uclong line_off;
-#ifdef __KERNEL__
+	u8 trace_on;
+	u32 line_on;		/* DCD(X.21, RSV) / sync(TE) change counters */
+	u32 line_off;
 	char name[16];
 	struct net_device *dev;
-
-	void *private;
-	struct sk_buff *tx_skb;
-	union {	/* This union has all the protocol-specific structures */
-		struct ppp_device pppdev;
-	}ifu;
 #ifdef CONFIG_PC300_MLPPP
 	void *cpc_tty;	/* information to PC300 TTY driver */
 #endif
-#endif /* __KERNEL__ */
 }pc300dev_t;
 
 typedef struct pc300hw {
@@ -346,43 +308,42 @@ typedef struct pc300hw {
 	int bus;		/* Bus (PCI, PMC, etc.) */
 	int nchan;		/* number of channels */
 	int irq;		/* interrupt request level */
-	uclong clock;		/* Board clock */
-	ucchar cpld_id;		/* CPLD ID (TE only) */
-	ucshort cpld_reg1;	/* CPLD reg 1 (TE only) */
-	ucshort cpld_reg2;	/* CPLD reg 2 (TE only) */
-	ucshort gpioc_reg;	/* PLX GPIOC reg */
-	ucshort intctl_reg;	/* PLX Int Ctrl/Status reg */
-	uclong iophys;		/* PLX registers I/O base */
-	uclong iosize;		/* PLX registers I/O size */
-	uclong plxphys;		/* PLX registers MMIO base (physical) */
+	u32 clock;		/* Board clock */
+	u8 cpld_id;		/* CPLD ID (TE only) */
+	u16 cpld_reg1;		/* CPLD reg 1 (TE only) */
+	u16 cpld_reg2;		/* CPLD reg 2 (TE only) */
+	u16 gpioc_reg;		/* PLX GPIOC reg */
+	u16 intctl_reg;		/* PLX Int Ctrl/Status reg */
+	u32 iophys;		/* PLX registers I/O base */
+	u32 iosize;		/* PLX registers I/O size */
+	u32 plxphys;		/* PLX registers MMIO base (physical) */
 	void __iomem * plxbase;	/* PLX registers MMIO base (virtual) */
-	uclong plxsize;		/* PLX registers MMIO size */
-	uclong scaphys;		/* SCA registers MMIO base (physical) */
+	u32 plxsize;		/* PLX registers MMIO size */
+	u32 scaphys;		/* SCA registers MMIO base (physical) */
 	void __iomem * scabase;	/* SCA registers MMIO base (virtual) */
-	uclong scasize;		/* SCA registers MMIO size */
-	uclong ramphys;		/* On-board RAM MMIO base (physical) */
+	u32 scasize;		/* SCA registers MMIO size */
+	u32 ramphys;		/* On-board RAM MMIO base (physical) */
 	void __iomem * rambase;	/* On-board RAM MMIO base (virtual) */
-	uclong alloc_ramsize;	/* RAM MMIO size allocated by the PCI bridge */
-	uclong ramsize;		/* On-board RAM MMIO size */
-	uclong falcphys;	/* FALC registers MMIO base (physical) */
+	u32 alloc_ramsize;	/* RAM MMIO size allocated by the PCI bridge */
+	u32 ramsize;		/* On-board RAM MMIO size */
+	u32 falcphys;		/* FALC registers MMIO base (physical) */
 	void __iomem * falcbase;/* FALC registers MMIO base (virtual) */
-	uclong falcsize;	/* FALC registers MMIO size */
+	u32 falcsize;		/* FALC registers MMIO size */
 } pc300hw_t;
 
 typedef struct pc300chconf {
-	sync_serial_settings	phys_settings;	/* Clock type/rate (in bps), 
+	sync_serial_settings	phys_settings;	/* Clock type/rate (in bps),
 						   loopback mode */
 	raw_hdlc_proto		proto_settings;	/* Encoding, parity (CRC) */
-	uclong media;		/* HW media (RS232, V.35, etc.) */
-	uclong proto;		/* Protocol (PPP, X.25, etc.) */
-	ucchar monitor;		/* Monitor mode (0 = off, !0 = on) */
+	u32 media;		/* HW media (RS232, V.35, etc.) */
+	u32 proto;		/* Protocol (PPP, X.25, etc.) */
 
 	/* TE-specific parameters */
-	ucchar lcode;		/* Line Code (AMI, B8ZS, etc.) */
-	ucchar fr_mode;		/* Frame Mode (ESF, D4, etc.) */
-	ucchar lbo;		/* Line Build Out */
-	ucchar rx_sens;		/* Rx Sensitivity (long- or short-haul) */
-	uclong tslot_bitmap;	/* bit[i]=1  =>  timeslot _i_ is active */
+	u8 lcode;		/* Line Code (AMI, B8ZS, etc.) */
+	u8 fr_mode;		/* Frame Mode (ESF, D4, etc.) */
+	u8 lbo;			/* Line Build Out */
+	u8 rx_sens;		/* Rx Sensitivity (long- or short-haul) */
+	u32 tslot_bitmap;	/* bit[i]=1  =>  timeslot _i_ is active */
 } pc300chconf_t;
 
 typedef struct pc300ch {
@@ -390,20 +351,18 @@ typedef struct pc300ch {
 	int channel;
 	pc300dev_t d;
 	pc300chconf_t conf;
-	ucchar tx_first_bd;	/* First TX DMA block descr. w/ data */
-	ucchar tx_next_bd;	/* Next free TX DMA block descriptor */
-	ucchar rx_first_bd;	/* First free RX DMA block descriptor */
-	ucchar rx_last_bd;	/* Last free RX DMA block descriptor */
-	ucchar nfree_tx_bd;	/* Number of free TX DMA block descriptors */
-	falc_t falc;		/* FALC structure (TE only) */
+	u8 tx_first_bd;	/* First TX DMA block descr. w/ data */
+	u8 tx_next_bd;	/* Next free TX DMA block descriptor */
+	u8 rx_first_bd;	/* First free RX DMA block descriptor */
+	u8 rx_last_bd;	/* Last free RX DMA block descriptor */
+	u8 nfree_tx_bd;	/* Number of free TX DMA block descriptors */
+	falc_t falc;	/* FALC structure (TE only) */
 } pc300ch_t;
 
 typedef struct pc300 {
 	pc300hw_t hw;			/* hardware config. */
 	pc300ch_t chan[PC300_MAXCHAN];
-#ifdef __KERNEL__
 	spinlock_t card_lock;
-#endif /* __KERNEL__ */
 } pc300_t;
 
 typedef struct pc300conf {
@@ -471,12 +430,7 @@ enum pc300_loopback_cmds {
 #define PC300_TX_QUEUE_LEN	100
 #define	PC300_DEF_MTU		1600
 
-#ifdef __KERNEL__
 /* Function Prototypes */
-void tx_dma_start(pc300_t *, int);
 int cpc_open(struct net_device *dev);
-int cpc_set_media(hdlc_device *, int);
-#endif /* __KERNEL__ */
 
 #endif	/* _PC300_H */
-
diff --git a/drivers/net/wan/pc300_drv.c b/drivers/net/wan/pc300_drv.c
index 334170527755..d0a8d1e352ac 100644
--- a/drivers/net/wan/pc300_drv.c
+++ b/drivers/net/wan/pc300_drv.c
@@ -227,8 +227,6 @@ static char rcsid[] =
 #include <linux/netdevice.h>
 #include <linux/spinlock.h>
 #include <linux/if.h>
-
-#include <net/syncppp.h>
 #include <net/arp.h>
 
 #include <asm/io.h>
@@ -285,8 +283,8 @@ static void rx_dma_buf_init(pc300_t *, int);
 static void tx_dma_buf_check(pc300_t *, int);
 static void rx_dma_buf_check(pc300_t *, int);
 static irqreturn_t cpc_intr(int, void *);
-static int clock_rate_calc(uclong, uclong, int *);
-static uclong detect_ram(pc300_t *);
+static int clock_rate_calc(u32, u32, int *);
+static u32 detect_ram(pc300_t *);
 static void plx_init(pc300_t *);
 static void cpc_trace(struct net_device *, struct sk_buff *, char);
 static int cpc_attach(struct net_device *, unsigned short, unsigned short);
@@ -311,10 +309,10 @@ static void tx_dma_buf_pt_init(pc300_t * card, int ch)
 			               + DMA_TX_BD_BASE + ch_factor * sizeof(pcsca_bd_t));
 
 	for (i = 0; i < N_DMA_TX_BUF; i++, ptdescr++) {
-		cpc_writel(&ptdescr->next, (uclong) (DMA_TX_BD_BASE +
+		cpc_writel(&ptdescr->next, (u32)(DMA_TX_BD_BASE +
 			(ch_factor + ((i + 1) & (N_DMA_TX_BUF - 1))) * sizeof(pcsca_bd_t)));
-		cpc_writel(&ptdescr->ptbuf, 
-						(uclong) (DMA_TX_BASE + (ch_factor + i) * BD_DEF_LEN));
+		cpc_writel(&ptdescr->ptbuf,
+			   (u32)(DMA_TX_BASE + (ch_factor + i) * BD_DEF_LEN));
 	}
 }
 
@@ -341,10 +339,10 @@ static void rx_dma_buf_pt_init(pc300_t * card, int ch)
 				       + DMA_RX_BD_BASE + ch_factor * sizeof(pcsca_bd_t));
 
 	for (i = 0; i < N_DMA_RX_BUF; i++, ptdescr++) {
-		cpc_writel(&ptdescr->next, (uclong) (DMA_RX_BD_BASE +
-	     	(ch_factor + ((i + 1) & (N_DMA_RX_BUF - 1))) * sizeof(pcsca_bd_t)));
+		cpc_writel(&ptdescr->next, (u32)(DMA_RX_BD_BASE +
+			(ch_factor + ((i + 1) & (N_DMA_RX_BUF - 1))) * sizeof(pcsca_bd_t)));
 		cpc_writel(&ptdescr->ptbuf,
-			   (uclong) (DMA_RX_BASE + (ch_factor + i) * BD_DEF_LEN));
+			   (u32)(DMA_RX_BASE + (ch_factor + i) * BD_DEF_LEN));
 	}
 }
 
@@ -367,8 +365,8 @@ static void tx_dma_buf_check(pc300_t * card, int ch)
 {
 	volatile pcsca_bd_t __iomem *ptdescr;
 	int i;
-	ucshort first_bd = card->chan[ch].tx_first_bd;
-	ucshort next_bd = card->chan[ch].tx_next_bd;
+	u16 first_bd = card->chan[ch].tx_first_bd;
+	u16 next_bd = card->chan[ch].tx_next_bd;
 
 	printk("#CH%d: f_bd = %d(0x%08zx), n_bd = %d(0x%08zx)\n", ch,
 	       first_bd, TX_BD_ADDR(ch, first_bd),
@@ -392,9 +390,9 @@ static void tx1_dma_buf_check(pc300_t * card, int ch)
 {
 	volatile pcsca_bd_t __iomem *ptdescr;
 	int i;
-	ucshort first_bd = card->chan[ch].tx_first_bd;
-	ucshort next_bd = card->chan[ch].tx_next_bd;
-	uclong scabase = card->hw.scabase;
+	u16 first_bd = card->chan[ch].tx_first_bd;
+	u16 next_bd = card->chan[ch].tx_next_bd;
+	u32 scabase = card->hw.scabase;
 
 	printk ("\nnfree_tx_bd = %d \n", card->chan[ch].nfree_tx_bd);
 	printk("#CH%d: f_bd = %d(0x%08x), n_bd = %d(0x%08x)\n", ch,
@@ -413,13 +411,13 @@ static void tx1_dma_buf_check(pc300_t * card, int ch)
 	printk("\n");
 }
 #endif
-			 
+
 static void rx_dma_buf_check(pc300_t * card, int ch)
 {
 	volatile pcsca_bd_t __iomem *ptdescr;
 	int i;
-	ucshort first_bd = card->chan[ch].rx_first_bd;
-	ucshort last_bd = card->chan[ch].rx_last_bd;
+	u16 first_bd = card->chan[ch].rx_first_bd;
+	u16 last_bd = card->chan[ch].rx_last_bd;
 	int ch_factor;
 
 	ch_factor = ch * N_DMA_RX_BUF;
@@ -440,9 +438,9 @@ static void rx_dma_buf_check(pc300_t * card, int ch)
 static int dma_get_rx_frame_size(pc300_t * card, int ch)
 {
 	volatile pcsca_bd_t __iomem *ptdescr;
-	ucshort first_bd = card->chan[ch].rx_first_bd;
+	u16 first_bd = card->chan[ch].rx_first_bd;
 	int rcvd = 0;
-	volatile ucchar status;
+	volatile u8 status;
 
 	ptdescr = (card->hw.rambase + RX_BD_ADDR(ch, first_bd));
 	while ((status = cpc_readb(&ptdescr->status)) & DST_OSB) {
@@ -462,12 +460,12 @@ static int dma_get_rx_frame_size(pc300_t * card, int ch)
  * dma_buf_write: writes a frame to the Tx DMA buffers
  * NOTE: this function writes one frame at a time.
  */
-static int dma_buf_write(pc300_t * card, int ch, ucchar * ptdata, int len)
+static int dma_buf_write(pc300_t *card, int ch, u8 *ptdata, int len)
 {
 	int i, nchar;
 	volatile pcsca_bd_t __iomem *ptdescr;
 	int tosend = len;
-	ucchar nbuf = ((len - 1) / BD_DEF_LEN) + 1;
+	u8 nbuf = ((len - 1) / BD_DEF_LEN) + 1;
 
 	if (nbuf >= card->chan[ch].nfree_tx_bd) {
 		return -ENOMEM;
@@ -509,7 +507,7 @@ static int dma_buf_read(pc300_t * card, int ch, struct sk_buff *skb)
 	pc300ch_t *chan = (pc300ch_t *) & card->chan[ch];
 	volatile pcsca_bd_t __iomem *ptdescr;
 	int rcvd = 0;
-	volatile ucchar status;
+	volatile u8 status;
 
 	ptdescr = (card->hw.rambase +
 				  RX_BD_ADDR(ch, chan->rx_first_bd));
@@ -563,8 +561,8 @@ static int dma_buf_read(pc300_t * card, int ch, struct sk_buff *skb)
 static void tx_dma_stop(pc300_t * card, int ch)
 {
 	void __iomem *scabase = card->hw.scabase;
-	ucchar drr_ena_bit = 1 << (5 + 2 * ch);
-	ucchar drr_rst_bit = 1 << (1 + 2 * ch);
+	u8 drr_ena_bit = 1 << (5 + 2 * ch);
+	u8 drr_rst_bit = 1 << (1 + 2 * ch);
 
 	/* Disable DMA */
 	cpc_writeb(scabase + DRR, drr_ena_bit);
@@ -574,8 +572,8 @@ static void tx_dma_stop(pc300_t * card, int ch)
 static void rx_dma_stop(pc300_t * card, int ch)
 {
 	void __iomem *scabase = card->hw.scabase;
-	ucchar drr_ena_bit = 1 << (4 + 2 * ch);
-	ucchar drr_rst_bit = 1 << (2 * ch);
+	u8 drr_ena_bit = 1 << (4 + 2 * ch);
+	u8 drr_rst_bit = 1 << (2 * ch);
 
 	/* Disable DMA */
 	cpc_writeb(scabase + DRR, drr_ena_bit);
@@ -607,7 +605,7 @@ static void rx_dma_start(pc300_t * card, int ch)
 /*************************/
 /***   FALC Routines   ***/
 /*************************/
-static void falc_issue_cmd(pc300_t * card, int ch, ucchar cmd)
+static void falc_issue_cmd(pc300_t *card, int ch, u8 cmd)
 {
 	void __iomem *falcbase = card->hw.falcbase;
 	unsigned long i = 0;
@@ -675,7 +673,7 @@ static void falc_intr_enable(pc300_t * card, int ch)
 static void falc_open_timeslot(pc300_t * card, int ch, int timeslot)
 {
 	void __iomem *falcbase = card->hw.falcbase;
-	ucchar tshf = card->chan[ch].falc.offset;
+	u8 tshf = card->chan[ch].falc.offset;
 
 	cpc_writeb(falcbase + F_REG((ICB1 + (timeslot - tshf) / 8), ch),
 		   cpc_readb(falcbase + F_REG((ICB1 + (timeslot - tshf) / 8), ch)) & 
@@ -691,7 +689,7 @@ static void falc_open_timeslot(pc300_t * card, int ch, int timeslot)
 static void falc_close_timeslot(pc300_t * card, int ch, int timeslot)
 {
 	void __iomem *falcbase = card->hw.falcbase;
-	ucchar tshf = card->chan[ch].falc.offset;
+	u8 tshf = card->chan[ch].falc.offset;
 
 	cpc_writeb(falcbase + F_REG((ICB1 + (timeslot - tshf) / 8), ch),
 		   cpc_readb(falcbase + F_REG((ICB1 + (timeslot - tshf) / 8), ch)) | 
@@ -812,7 +810,7 @@ static void falc_init_t1(pc300_t * card, int ch)
 	pc300chconf_t *conf = (pc300chconf_t *) & chan->conf;
 	falc_t *pfalc = (falc_t *) & chan->falc;
 	void __iomem *falcbase = card->hw.falcbase;
-	ucchar dja = (ch ? (LIM2_DJA2 | LIM2_DJA1) : 0);
+	u8 dja = (ch ? (LIM2_DJA2 | LIM2_DJA1) : 0);
 
 	/* Switch to T1 mode (PCM 24) */
 	cpc_writeb(falcbase + F_REG(FMR1, ch), FMR1_PMOD);
@@ -981,7 +979,7 @@ static void falc_init_e1(pc300_t * card, int ch)
 	pc300chconf_t *conf = (pc300chconf_t *) & chan->conf;
 	falc_t *pfalc = (falc_t *) & chan->falc;
 	void __iomem *falcbase = card->hw.falcbase;
-	ucchar dja = (ch ? (LIM2_DJA2 | LIM2_DJA1) : 0);
+	u8 dja = (ch ? (LIM2_DJA2 | LIM2_DJA1) : 0);
 
 	/* Switch to E1 mode (PCM 30) */
 	cpc_writeb(falcbase + F_REG(FMR1, ch),
@@ -1187,7 +1185,7 @@ static void te_config(pc300_t * card, int ch)
 	pc300chconf_t *conf = (pc300chconf_t *) & chan->conf;
 	falc_t *pfalc = (falc_t *) & chan->falc;
 	void __iomem *falcbase = card->hw.falcbase;
-	ucchar dummy;
+	u8 dummy;
 	unsigned long flags;
 
 	memset(pfalc, 0, sizeof(falc_t));
@@ -1403,7 +1401,7 @@ static void falc_update_stats(pc300_t * card, int ch)
 	pc300chconf_t *conf = (pc300chconf_t *) & chan->conf;
 	falc_t *pfalc = (falc_t *) & chan->falc;
 	void __iomem *falcbase = card->hw.falcbase;
-	ucshort counter;
+	u16 counter;
 
 	counter = cpc_readb(falcbase + F_REG(FECL, ch));
 	counter |= cpc_readb(falcbase + F_REG(FECH, ch)) << 8;
@@ -1729,7 +1727,7 @@ static void falc_pattern_test(pc300_t * card, int ch, unsigned int activate)
  * Description:	This routine returns the bit error counter value
  *----------------------------------------------------------------------------
  */
-static ucshort falc_pattern_test_error(pc300_t * card, int ch)
+static u16 falc_pattern_test_error(pc300_t * card, int ch)
 {
 	pc300ch_t *chan = (pc300ch_t *) & card->chan[ch];
 	falc_t *pfalc = (falc_t *) & chan->falc;
@@ -1776,7 +1774,7 @@ static void cpc_tx_timeout(struct net_device *dev)
 	pc300_t *card = (pc300_t *) chan->card;
 	int ch = chan->channel;
 	unsigned long flags;
-	ucchar ilar;
+	u8 ilar;
 
 	dev->stats.tx_errors++;
 	dev->stats.tx_aborted_errors++;
@@ -1807,11 +1805,7 @@ static int cpc_queue_xmit(struct sk_buff *skb, struct net_device *dev)
 	int i;
 #endif
 
-	if (chan->conf.monitor) {
-		/* In monitor mode no Tx is done: ignore packet */
-		dev_kfree_skb(skb);
-		return 0;
-	} else if (!netif_carrier_ok(dev)) {
+	if (!netif_carrier_ok(dev)) {
 		/* DCD must be OFF: drop packet */
 		dev_kfree_skb(skb);
 		dev->stats.tx_errors++;
@@ -1836,7 +1830,7 @@ static int cpc_queue_xmit(struct sk_buff *skb, struct net_device *dev)
 	}
 
 	/* Write buffer to DMA buffers */
-	if (dma_buf_write(card, ch, (ucchar *) skb->data, skb->len) != 0) {
+	if (dma_buf_write(card, ch, (u8 *)skb->data, skb->len) != 0) {
 //		printk("%s: write error. Dropping TX packet.\n", dev->name);
 		netif_stop_queue(dev);
 		dev_kfree_skb(skb);
@@ -2001,7 +1995,7 @@ static void sca_tx_intr(pc300dev_t *dev)
 static void sca_intr(pc300_t * card)
 {
 	void __iomem *scabase = card->hw.scabase;
-	volatile uclong status;
+	volatile u32 status;
 	int ch;
 	int intr_count = 0;
 	unsigned char dsr_rx;
@@ -2016,7 +2010,7 @@ static void sca_intr(pc300_t * card)
 
 	    /**** Reception ****/
 			if (status & IR0_DRX((IR0_DMIA | IR0_DMIB), ch)) {
-				ucchar drx_stat = cpc_readb(scabase + DSR_RX(ch));
+				u8 drx_stat = cpc_readb(scabase + DSR_RX(ch));
 
 				/* Clear RX interrupts */
 				cpc_writeb(scabase + DSR_RX(ch), drx_stat | DSR_DWE);
@@ -2090,7 +2084,7 @@ static void sca_intr(pc300_t * card)
 
 	    /**** Transmission ****/
 			if (status & IR0_DTX((IR0_EFT | IR0_DMIA | IR0_DMIB), ch)) {
-				ucchar dtx_stat = cpc_readb(scabase + DSR_TX(ch));
+				u8 dtx_stat = cpc_readb(scabase + DSR_TX(ch));
 
 				/* Clear TX interrupts */
 				cpc_writeb(scabase + DSR_TX(ch), dtx_stat | DSR_DWE);
@@ -2134,7 +2128,7 @@ static void sca_intr(pc300_t * card)
 
 	    /**** MSCI ****/
 			if (status & IR0_M(IR0_RXINTA, ch)) {
-				ucchar st1 = cpc_readb(scabase + M_REG(ST1, ch));
+				u8 st1 = cpc_readb(scabase + M_REG(ST1, ch));
 
 				/* Clear MSCI interrupts */
 				cpc_writeb(scabase + M_REG(ST1, ch), st1);
@@ -2176,7 +2170,7 @@ static void sca_intr(pc300_t * card)
 	}
 }
 
-static void falc_t1_loop_detection(pc300_t * card, int ch, ucchar frs1)
+static void falc_t1_loop_detection(pc300_t *card, int ch, u8 frs1)
 {
 	pc300ch_t *chan = (pc300ch_t *) & card->chan[ch];
 	falc_t *pfalc = (falc_t *) & chan->falc;
@@ -2201,7 +2195,7 @@ static void falc_t1_loop_detection(pc300_t * card, int ch, ucchar frs1)
 	}
 }
 
-static void falc_e1_loop_detection(pc300_t * card, int ch, ucchar rsp)
+static void falc_e1_loop_detection(pc300_t *card, int ch, u8 rsp)
 {
 	pc300ch_t *chan = (pc300ch_t *) & card->chan[ch];
 	falc_t *pfalc = (falc_t *) & chan->falc;
@@ -2231,8 +2225,8 @@ static void falc_t1_intr(pc300_t * card, int ch)
 	pc300ch_t *chan = (pc300ch_t *) & card->chan[ch];
 	falc_t *pfalc = (falc_t *) & chan->falc;
 	void __iomem *falcbase = card->hw.falcbase;
-	ucchar isr0, isr3, gis;
-	ucchar dummy;
+	u8 isr0, isr3, gis;
+	u8 dummy;
 
 	while ((gis = cpc_readb(falcbase + F_REG(GIS, ch))) != 0) {
 		if (gis & GIS_ISR0) {
@@ -2278,8 +2272,8 @@ static void falc_e1_intr(pc300_t * card, int ch)
 	pc300ch_t *chan = (pc300ch_t *) & card->chan[ch];
 	falc_t *pfalc = (falc_t *) & chan->falc;
 	void __iomem *falcbase = card->hw.falcbase;
-	ucchar isr1, isr2, isr3, gis, rsp;
-	ucchar dummy;
+	u8 isr1, isr2, isr3, gis, rsp;
+	u8 dummy;
 
 	while ((gis = cpc_readb(falcbase + F_REG(GIS, ch))) != 0) {
 		rsp = cpc_readb(falcbase + F_REG(RSP, ch));
@@ -2361,7 +2355,7 @@ static void falc_intr(pc300_t * card)
 static irqreturn_t cpc_intr(int irq, void *dev_id)
 {
 	pc300_t *card = dev_id;
-	volatile ucchar plx_status;
+	volatile u8 plx_status;
 
 	if (!card) {
 #ifdef PC300_DEBUG_INTR
@@ -2400,7 +2394,7 @@ static irqreturn_t cpc_intr(int irq, void *dev_id)
 
 static void cpc_sca_status(pc300_t * card, int ch)
 {
-	ucchar ilar;
+	u8 ilar;
 	void __iomem *scabase = card->hw.scabase;
 	unsigned long flags;
 
@@ -2818,7 +2812,7 @@ static int cpc_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
 	}
 }
 
-static int clock_rate_calc(uclong rate, uclong clock, int *br_io)
+static int clock_rate_calc(u32 rate, u32 clock, int *br_io)
 {
 	int br, tc;
 	int br_pwr, error;
@@ -2855,12 +2849,12 @@ static int ch_config(pc300dev_t * d)
 	void __iomem *scabase = card->hw.scabase;
 	void __iomem *plxbase = card->hw.plxbase;
 	int ch = chan->channel;
-	uclong clkrate = chan->conf.phys_settings.clock_rate;
-	uclong clktype = chan->conf.phys_settings.clock_type;
-	ucshort encoding = chan->conf.proto_settings.encoding;
-	ucshort parity = chan->conf.proto_settings.parity;   
-	ucchar md0, md2;
-    
+	u32 clkrate = chan->conf.phys_settings.clock_rate;
+	u32 clktype = chan->conf.phys_settings.clock_type;
+	u16 encoding = chan->conf.proto_settings.encoding;
+	u16 parity = chan->conf.proto_settings.parity;
+	u8 md0, md2;
+
 	/* Reset the channel */
 	cpc_writeb(scabase + M_REG(CMD, ch), CMD_CH_RST);
 
@@ -3152,19 +3146,10 @@ int cpc_open(struct net_device *dev)
 	printk("pc300: cpc_open");
 #endif
 
-#ifdef FIXME
-	if (hdlc->proto.id == IF_PROTO_PPP) {
-		d->if_ptr = &hdlc->state.ppp.pppdev;
-	}
-#endif
-
 	result = hdlc_open(dev);
-	if (/* FIXME hdlc->proto.id == IF_PROTO_PPP*/ 0) {
-		dev->priv = d;
-	}
-	if (result) {
+
+	if (result)
 		return result;
-	}
 
 	sprintf(ifr.ifr_name, "%s", dev->name);
 	result = cpc_opench(d);
@@ -3197,9 +3182,7 @@ static int cpc_close(struct net_device *dev)
 	CPC_UNLOCK(card, flags);
 
 	hdlc_close(dev);
-	if (/* FIXME hdlc->proto.id == IF_PROTO_PPP*/ 0) {
-		d->if_ptr = NULL;
-	}
+
 #ifdef CONFIG_PC300_MLPPP
 	if (chan->conf.proto == PC300_PROTO_MLPPP) {
 		cpc_tty_unregister_service(d);
@@ -3210,16 +3193,16 @@ static int cpc_close(struct net_device *dev)
 	return 0;
 }
 
-static uclong detect_ram(pc300_t * card)
+static u32 detect_ram(pc300_t * card)
 {
-	uclong i;
-	ucchar data;
+	u32 i;
+	u8 data;
 	void __iomem *rambase = card->hw.rambase;
 
 	card->hw.ramsize = PC300_RAMSIZE;
 	/* Let's find out how much RAM is present on this board */
 	for (i = 0; i < card->hw.ramsize; i++) {
-		data = (ucchar) (i & 0xff);
+		data = (u8)(i & 0xff);
 		cpc_writeb(rambase + i, data);
 		if (cpc_readb(rambase + i) != data) {
 			break;
@@ -3296,7 +3279,7 @@ static void cpc_init_card(pc300_t * card)
 	cpc_writeb(card->hw.scabase + DMER, 0x80);
 
 	if (card->hw.type == PC300_TE) {
-		ucchar reg1;
+		u8 reg1;
 
 		/* Check CPLD version */
 		reg1 = cpc_readb(card->hw.falcbase + CPLD_REG1);
@@ -3360,7 +3343,6 @@ static void cpc_init_card(pc300_t * card)
 		chan->nfree_tx_bd = N_DMA_TX_BUF;
 
 		d->chan = chan;
-		d->tx_skb = NULL;
 		d->trace_on = 0;
 		d->line_on = 0;
 		d->line_off = 0;
@@ -3431,7 +3413,7 @@ cpc_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
 {
 	static int first_time = 1;
 	int err, eeprom_outdated = 0;
-	ucshort device_id;
+	u16 device_id;
 	pc300_t *card;
 
 	if (first_time) {
diff --git a/drivers/net/wan/sbni.c b/drivers/net/wan/sbni.c
index e59255a155a9..6596cd0742b9 100644
--- a/drivers/net/wan/sbni.c
+++ b/drivers/net/wan/sbni.c
@@ -1317,7 +1317,7 @@ sbni_ioctl( struct net_device  *dev,  struct ifreq  *ifr,  int  cmd )
 		break;
 
 	case  SIOCDEVRESINSTATS :
-		if( current->euid != 0 )	/* root only */
+		if (!capable(CAP_NET_ADMIN))
 			return  -EPERM;
 		memset( &nl->in_stats, 0, sizeof(struct sbni_in_stats) );
 		break;
@@ -1334,7 +1334,7 @@ sbni_ioctl( struct net_device  *dev,  struct ifreq  *ifr,  int  cmd )
 		break;
 
 	case  SIOCDEVSHWSTATE :
-		if( current->euid != 0 )	/* root only */
+		if (!capable(CAP_NET_ADMIN))
 			return  -EPERM;
 
 		spin_lock( &nl->lock );
@@ -1355,7 +1355,7 @@ sbni_ioctl( struct net_device  *dev,  struct ifreq  *ifr,  int  cmd )
 #ifdef CONFIG_SBNI_MULTILINE
 
 	case  SIOCDEVENSLAVE :
-		if( current->euid != 0 )	/* root only */
+		if (!capable(CAP_NET_ADMIN))
 			return  -EPERM;
 
 		if (copy_from_user( slave_name, ifr->ifr_data, sizeof slave_name ))
@@ -1370,7 +1370,7 @@ sbni_ioctl( struct net_device  *dev,  struct ifreq  *ifr,  int  cmd )
 		return  enslave( dev, slave_dev );
 
 	case  SIOCDEVEMANSIPATE :
-		if( current->euid != 0 )	/* root only */
+		if (!capable(CAP_NET_ADMIN))
 			return  -EPERM;
 
 		return  emancipate( dev );
diff --git a/drivers/net/wan/sealevel.c b/drivers/net/wan/sealevel.c
index 44a89df1b8bf..c0235844a4d5 100644
--- a/drivers/net/wan/sealevel.c
+++ b/drivers/net/wan/sealevel.c
@@ -8,6 +8,7 @@
  *
  *	(c) Copyright 1999, 2001 Alan Cox
  *	(c) Copyright 2001 Red Hat Inc.
+ *	Generic HDLC port Copyright (C) 2008 Krzysztof Halasa <khc@pm.waw.pl>
  *
  */
 
@@ -19,6 +20,7 @@
 #include <linux/netdevice.h>
 #include <linux/if_arp.h>
 #include <linux/delay.h>
+#include <linux/hdlc.h>
 #include <linux/ioport.h>
 #include <linux/init.h>
 #include <net/arp.h>
@@ -27,22 +29,19 @@
 #include <asm/io.h>
 #include <asm/dma.h>
 #include <asm/byteorder.h>
-#include <net/syncppp.h>
 #include "z85230.h"
 
 
 struct slvl_device
 {
-	void *if_ptr;	/* General purpose pointer (used by SPPP) */
 	struct z8530_channel *chan;
-	struct ppp_device pppdev;
 	int channel;
 };
 
 
 struct slvl_board
 {
-	struct slvl_device *dev[2];
+	struct slvl_device dev[2];
 	struct z8530_dev board;
 	int iobase;
 };
@@ -51,72 +50,69 @@ struct slvl_board
  *	Network driver support routines
  */
 
+static inline struct slvl_device* dev_to_chan(struct net_device *dev)
+{
+	return (struct slvl_device *)dev_to_hdlc(dev)->priv;
+}
+
 /*
- *	Frame receive. Simple for our card as we do sync ppp and there
+ *	Frame receive. Simple for our card as we do HDLC and there
  *	is no funny garbage involved
  */
- 
+
 static void sealevel_input(struct z8530_channel *c, struct sk_buff *skb)
 {
 	/* Drop the CRC - it's not a good idea to try and negotiate it ;) */
-	skb_trim(skb, skb->len-2);
-	skb->protocol=htons(ETH_P_WAN_PPP);
+	skb_trim(skb, skb->len - 2);
+	skb->protocol = hdlc_type_trans(skb, c->netdevice);
 	skb_reset_mac_header(skb);
-	skb->dev=c->netdevice;
-	/*
-	 *	Send it to the PPP layer. We don't have time to process
-	 *	it right now.
-	 */
+	skb->dev = c->netdevice;
 	netif_rx(skb);
 	c->netdevice->last_rx = jiffies;
 }
- 
+
 /*
  *	We've been placed in the UP state
- */ 
- 
+ */
+
 static int sealevel_open(struct net_device *d)
 {
-	struct slvl_device *slvl=d->priv;
+	struct slvl_device *slvl = dev_to_chan(d);
 	int err = -1;
 	int unit = slvl->channel;
-	
+
 	/*
-	 *	Link layer up. 
+	 *	Link layer up.
 	 */
 
-	switch(unit)
+	switch (unit)
 	{
 		case 0:
-			err=z8530_sync_dma_open(d, slvl->chan);
+			err = z8530_sync_dma_open(d, slvl->chan);
 			break;
 		case 1:
-			err=z8530_sync_open(d, slvl->chan);
+			err = z8530_sync_open(d, slvl->chan);
 			break;
 	}
-	
-	if(err)
+
+	if (err)
 		return err;
-	/*
-	 *	Begin PPP
-	 */
-	err=sppp_open(d);
-	if(err)
-	{
-		switch(unit)
-		{
+
+	err = hdlc_open(d);
+	if (err) {
+		switch (unit) {
 			case 0:
 				z8530_sync_dma_close(d, slvl->chan);
 				break;
 			case 1:
 				z8530_sync_close(d, slvl->chan);
 				break;
-		}				
+		}
 		return err;
 	}
-	
-	slvl->chan->rx_function=sealevel_input;
-	
+
+	slvl->chan->rx_function = sealevel_input;
+
 	/*
 	 *	Go go go
 	 */
@@ -126,26 +122,19 @@ static int sealevel_open(struct net_device *d)
 
 static int sealevel_close(struct net_device *d)
 {
-	struct slvl_device *slvl=d->priv;
+	struct slvl_device *slvl = dev_to_chan(d);
 	int unit = slvl->channel;
-	
+
 	/*
 	 *	Discard new frames
 	 */
-	
-	slvl->chan->rx_function=z8530_null_rx;
-		
-	/*
-	 *	PPP off
-	 */
-	sppp_close(d);
-	/*
-	 *	Link layer down
-	 */
 
+	slvl->chan->rx_function = z8530_null_rx;
+
+	hdlc_close(d);
 	netif_stop_queue(d);
-		
-	switch(unit)
+
+	switch (unit)
 	{
 		case 0:
 			z8530_sync_dma_close(d, slvl->chan);
@@ -159,210 +148,153 @@ static int sealevel_close(struct net_device *d)
 
 static int sealevel_ioctl(struct net_device *d, struct ifreq *ifr, int cmd)
 {
-	/* struct slvl_device *slvl=d->priv;
+	/* struct slvl_device *slvl=dev_to_chan(d);
 	   z8530_ioctl(d,&slvl->sync.chanA,ifr,cmd) */
-	return sppp_do_ioctl(d, ifr,cmd);
-}
-
-static struct net_device_stats *sealevel_get_stats(struct net_device *d)
-{
-	struct slvl_device *slvl=d->priv;
-	if(slvl)
-		return z8530_get_stats(slvl->chan);
-	else
-		return NULL;
+	return hdlc_ioctl(d, ifr, cmd);
 }
 
 /*
- *	Passed PPP frames, fire them downwind.
+ *	Passed network frames, fire them downwind.
  */
- 
+
 static int sealevel_queue_xmit(struct sk_buff *skb, struct net_device *d)
 {
-	struct slvl_device *slvl=d->priv;
-	return z8530_queue_xmit(slvl->chan, skb);
+	return z8530_queue_xmit(dev_to_chan(d)->chan, skb);
 }
 
-static int sealevel_neigh_setup(struct neighbour *n)
+static int sealevel_attach(struct net_device *dev, unsigned short encoding,
+			   unsigned short parity)
 {
-	if (n->nud_state == NUD_NONE) {
-		n->ops = &arp_broken_ops;
-		n->output = n->ops->output;
-	}
-	return 0;
+	if (encoding == ENCODING_NRZ && parity == PARITY_CRC16_PR1_CCITT)
+		return 0;
+	return -EINVAL;
 }
 
-static int sealevel_neigh_setup_dev(struct net_device *dev, struct neigh_parms *p)
+static int slvl_setup(struct slvl_device *sv, int iobase, int irq)
 {
-	if (p->tbl->family == AF_INET) {
-		p->neigh_setup = sealevel_neigh_setup;
-		p->ucast_probes = 0;
-		p->mcast_probes = 0;
+	struct net_device *dev = alloc_hdlcdev(sv);
+	if (!dev)
+		return -1;
+
+	dev_to_hdlc(dev)->attach = sealevel_attach;
+	dev_to_hdlc(dev)->xmit = sealevel_queue_xmit;
+	dev->open = sealevel_open;
+	dev->stop = sealevel_close;
+	dev->do_ioctl = sealevel_ioctl;
+	dev->base_addr = iobase;
+	dev->irq = irq;
+
+	if (register_hdlc_device(dev)) {
+		printk(KERN_ERR "sealevel: unable to register HDLC device\n");
+		free_netdev(dev);
+		return -1;
 	}
-	return 0;
-}
 
-static int sealevel_attach(struct net_device *dev)
-{
-	struct slvl_device *sv = dev->priv;
-	sppp_attach(&sv->pppdev);
+	sv->chan->netdevice = dev;
 	return 0;
 }
 
-static void sealevel_detach(struct net_device *dev)
-{
-	sppp_detach(dev);
-}
-		
-static void slvl_setup(struct net_device *d)
-{
-	d->open = sealevel_open;
-	d->stop = sealevel_close;
-	d->init = sealevel_attach;
-	d->uninit = sealevel_detach;
-	d->hard_start_xmit = sealevel_queue_xmit;
-	d->get_stats = sealevel_get_stats;
-	d->set_multicast_list = NULL;
-	d->do_ioctl = sealevel_ioctl;
-	d->neigh_setup = sealevel_neigh_setup_dev;
-	d->set_mac_address = NULL;
-
-}
-
-static inline struct slvl_device *slvl_alloc(int iobase, int irq)
-{
-	struct net_device *d;
-	struct slvl_device *sv;
-
-	d = alloc_netdev(sizeof(struct slvl_device), "hdlc%d",
-			 slvl_setup);
-
-	if (!d) 
-		return NULL;
-
-	sv = d->priv;
-	d->ml_priv = sv;
-	sv->if_ptr = &sv->pppdev;
-	sv->pppdev.dev = d;
-	d->base_addr = iobase;
-	d->irq = irq;
-		
-	return sv;
-}
-
 
 /*
  *	Allocate and setup Sealevel board.
  */
- 
-static __init struct slvl_board *slvl_init(int iobase, int irq, 
+
+static __init struct slvl_board *slvl_init(int iobase, int irq,
 					   int txdma, int rxdma, int slow)
 {
 	struct z8530_dev *dev;
 	struct slvl_board *b;
-	
+
 	/*
 	 *	Get the needed I/O space
 	 */
 
-	if(!request_region(iobase, 8, "Sealevel 4021")) 
-	{	
-		printk(KERN_WARNING "sealevel: I/O 0x%X already in use.\n", iobase);
+	if (!request_region(iobase, 8, "Sealevel 4021")) {
+		printk(KERN_WARNING "sealevel: I/O 0x%X already in use.\n",
+		       iobase);
 		return NULL;
 	}
-	
-	b = kzalloc(sizeof(struct slvl_board), GFP_KERNEL);
-	if(!b)
-		goto fail3;
 
-	if (!(b->dev[0]= slvl_alloc(iobase, irq)))
-		goto fail2;
+	b = kzalloc(sizeof(struct slvl_board), GFP_KERNEL);
+	if (!b)
+		goto err_kzalloc;
 
-	b->dev[0]->chan = &b->board.chanA;	
-	b->dev[0]->channel = 0;
-	
-	if (!(b->dev[1] = slvl_alloc(iobase, irq)))
-		goto fail1_0;
+	b->dev[0].chan = &b->board.chanA;
+	b->dev[0].channel = 0;
 
-	b->dev[1]->chan = &b->board.chanB;
-	b->dev[1]->channel = 1;
+	b->dev[1].chan = &b->board.chanB;
+	b->dev[1].channel = 1;
 
 	dev = &b->board;
-	
+
 	/*
 	 *	Stuff in the I/O addressing
 	 */
-	 
+
 	dev->active = 0;
 
 	b->iobase = iobase;
-	
+
 	/*
 	 *	Select 8530 delays for the old board
 	 */
-	 
-	if(slow)
+
+	if (slow)
 		iobase |= Z8530_PORT_SLEEP;
-		
-	dev->chanA.ctrlio=iobase+1;
-	dev->chanA.dataio=iobase;
-	dev->chanB.ctrlio=iobase+3;
-	dev->chanB.dataio=iobase+2;
-	
-	dev->chanA.irqs=&z8530_nop;
-	dev->chanB.irqs=&z8530_nop;
-	
+
+	dev->chanA.ctrlio = iobase + 1;
+	dev->chanA.dataio = iobase;
+	dev->chanB.ctrlio = iobase + 3;
+	dev->chanB.dataio = iobase + 2;
+
+	dev->chanA.irqs = &z8530_nop;
+	dev->chanB.irqs = &z8530_nop;
+
 	/*
 	 *	Assert DTR enable DMA
 	 */
-	 
-	outb(3|(1<<7), b->iobase+4);	
-	
+
+	outb(3 | (1 << 7), b->iobase + 4);
+
 
 	/* We want a fast IRQ for this device. Actually we'd like an even faster
 	   IRQ ;) - This is one driver RtLinux is made for */
-   
-	if(request_irq(irq, &z8530_interrupt, IRQF_DISABLED, "SeaLevel", dev)<0)
-	{
+
+	if (request_irq(irq, &z8530_interrupt, IRQF_DISABLED,
+			"SeaLevel", dev) < 0) {
 		printk(KERN_WARNING "sealevel: IRQ %d already in use.\n", irq);
-		goto fail1_1;
+		goto err_request_irq;
 	}
-	
-	dev->irq=irq;
-	dev->chanA.private=&b->dev[0];
-	dev->chanB.private=&b->dev[1];
-	dev->chanA.netdevice=b->dev[0]->pppdev.dev;
-	dev->chanB.netdevice=b->dev[1]->pppdev.dev;
-	dev->chanA.dev=dev;
-	dev->chanB.dev=dev;
-
-	dev->chanA.txdma=3;
-	dev->chanA.rxdma=1;
-	if(request_dma(dev->chanA.txdma, "SeaLevel (TX)")!=0)
-		goto fail;
-		
-	if(request_dma(dev->chanA.rxdma, "SeaLevel (RX)")!=0)
-		goto dmafail;
-	
+
+	dev->irq = irq;
+	dev->chanA.private = &b->dev[0];
+	dev->chanB.private = &b->dev[1];
+	dev->chanA.dev = dev;
+	dev->chanB.dev = dev;
+
+	dev->chanA.txdma = 3;
+	dev->chanA.rxdma = 1;
+	if (request_dma(dev->chanA.txdma, "SeaLevel (TX)"))
+		goto err_dma_tx;
+
+	if (request_dma(dev->chanA.rxdma, "SeaLevel (RX)"))
+		goto err_dma_rx;
+
 	disable_irq(irq);
-		
+
 	/*
 	 *	Begin normal initialise
 	 */
-	 
-	if(z8530_init(dev)!=0)
-	{
+
+	if (z8530_init(dev) != 0) {
 		printk(KERN_ERR "Z8530 series device not found.\n");
 		enable_irq(irq);
-		goto dmafail2;
+		goto free_hw;
 	}
-	if(dev->type==Z85C30)
-	{
+	if (dev->type == Z85C30) {
 		z8530_channel_load(&dev->chanA, z8530_hdlc_kilostream);
 		z8530_channel_load(&dev->chanB, z8530_hdlc_kilostream);
-	}
-	else
-	{
+	} else {
 		z8530_channel_load(&dev->chanA, z8530_hdlc_kilostream_85230);
 		z8530_channel_load(&dev->chanB, z8530_hdlc_kilostream_85230);
 	}
@@ -370,36 +302,31 @@ static __init struct slvl_board *slvl_init(int iobase, int irq,
 	/*
 	 *	Now we can take the IRQ
 	 */
-	
+
 	enable_irq(irq);
 
-	if (register_netdev(b->dev[0]->pppdev.dev)) 
-		goto dmafail2;
-		
-	if (register_netdev(b->dev[1]->pppdev.dev)) 
-		goto fail_unit;
+	if (slvl_setup(&b->dev[0], iobase, irq))
+		goto free_hw;
+	if (slvl_setup(&b->dev[1], iobase, irq))
+		goto free_netdev0;
 
 	z8530_describe(dev, "I/O", iobase);
-	dev->active=1;
+	dev->active = 1;
 	return b;
 
-fail_unit:
-	unregister_netdev(b->dev[0]->pppdev.dev);
-	
-dmafail2:
+free_netdev0:
+	unregister_hdlc_device(b->dev[0].chan->netdevice);
+	free_netdev(b->dev[0].chan->netdevice);
+free_hw:
 	free_dma(dev->chanA.rxdma);
-dmafail:
+err_dma_rx:
 	free_dma(dev->chanA.txdma);
-fail:
+err_dma_tx:
 	free_irq(irq, dev);
-fail1_1:
-	free_netdev(b->dev[1]->pppdev.dev);
-fail1_0:
-	free_netdev(b->dev[0]->pppdev.dev);
-fail2:
+err_request_irq:
 	kfree(b);
-fail3:
-	release_region(iobase,8);
+err_kzalloc:
+	release_region(iobase, 8);
 	return NULL;
 }
 
@@ -408,14 +335,14 @@ static void __exit slvl_shutdown(struct slvl_board *b)
 	int u;
 
 	z8530_shutdown(&b->board);
-	
-	for(u=0; u<2; u++)
+
+	for (u = 0; u < 2; u++)
 	{
-		struct net_device *d = b->dev[u]->pppdev.dev;
-		unregister_netdev(d);
+		struct net_device *d = b->dev[u].chan->netdevice;
+		unregister_hdlc_device(d);
 		free_netdev(d);
 	}
-	
+
 	free_irq(b->board.irq, &b->board);
 	free_dma(b->board.chanA.rxdma);
 	free_dma(b->board.chanA.txdma);
@@ -451,10 +378,6 @@ static struct slvl_board *slvl_unit;
 
 static int __init slvl_init_module(void)
 {
-#ifdef MODULE
-	printk(KERN_INFO "SeaLevel Z85230 Synchronous Driver v 0.02.\n");
-	printk(KERN_INFO "(c) Copyright 1998, Building Number Three Ltd.\n");
-#endif
 	slvl_unit = slvl_init(io, irq, txdma, rxdma, slow);
 
 	return slvl_unit ? 0 : -ENODEV;
diff --git a/drivers/net/wan/syncppp.c b/drivers/net/wan/syncppp.c
index 29b4b94e4947..327d58589e12 100644
--- a/drivers/net/wan/syncppp.c
+++ b/drivers/net/wan/syncppp.c
@@ -230,13 +230,6 @@ static void sppp_input (struct net_device *dev, struct sk_buff *skb)
 	skb->dev=dev;
 	skb_reset_mac_header(skb);
 
-	if (dev->flags & IFF_RUNNING)
-	{
-		/* Count received bytes, add FCS and one flag */
-		sp->ibytes+= skb->len + 3;
-		sp->ipkts++;
-	}
-
 	if (!pskb_may_pull(skb, PPP_HEADER_LEN)) {
 		/* Too small packet, drop it. */
 		if (sp->pp_flags & PP_DEBUG)
@@ -832,7 +825,6 @@ static void sppp_cp_send (struct sppp *sp, u16 proto, u8 type,
 			sppp_print_bytes ((u8*) (lh+1), len);
 		printk (">\n");
 	}
-	sp->obytes += skb->len;
 	/* Control is high priority so it doesn't get queued behind data */
 	skb->priority=TC_PRIO_CONTROL;
 	skb->dev = dev;
@@ -875,7 +867,6 @@ static void sppp_cisco_send (struct sppp *sp, int type, u32 par1, u32 par2)
 		printk (KERN_WARNING "%s: cisco output: <%xh %xh %xh %xh %xh-%xh>\n",
 			dev->name,  ntohl (ch->type), ch->par1,
 			ch->par2, ch->rel, ch->time0, ch->time1);
-	sp->obytes += skb->len;
 	skb->priority=TC_PRIO_CONTROL;
 	skb->dev = dev;
 	skb_queue_tail(&tx_queue, skb);
diff --git a/drivers/net/wan/z85230.c b/drivers/net/wan/z85230.c
index 98ef400908b8..243bd8d918fe 100644
--- a/drivers/net/wan/z85230.c
+++ b/drivers/net/wan/z85230.c
@@ -43,6 +43,7 @@
 #include <linux/netdevice.h>
 #include <linux/if_arp.h>
 #include <linux/delay.h>
+#include <linux/hdlc.h>
 #include <linux/ioport.h>
 #include <linux/init.h>
 #include <asm/dma.h>
@@ -51,7 +52,6 @@
 #define RT_UNLOCK
 #include <linux/spinlock.h>
 
-#include <net/syncppp.h>
 #include "z85230.h"
 
 
@@ -440,51 +440,46 @@ static void z8530_tx(struct z8530_channel *c)
  *	A status event occurred in PIO synchronous mode. There are several
  *	reasons the chip will bother us here. A transmit underrun means we
  *	failed to feed the chip fast enough and just broke a packet. A DCD
- *	change is a line up or down. We communicate that back to the protocol
- *	layer for synchronous PPP to renegotiate.
+ *	change is a line up or down.
  */
 
 static void z8530_status(struct z8530_channel *chan)
 {
 	u8 status, altered;
 
-	status=read_zsreg(chan, R0);
-	altered=chan->status^status;
-	
-	chan->status=status;
-	
-	if(status&TxEOM)
-	{
+	status = read_zsreg(chan, R0);
+	altered = chan->status ^ status;
+
+	chan->status = status;
+
+	if (status & TxEOM) {
 /*		printk("%s: Tx underrun.\n", chan->dev->name); */
-		chan->stats.tx_fifo_errors++;
+		chan->netdevice->stats.tx_fifo_errors++;
 		write_zsctrl(chan, ERR_RES);
 		z8530_tx_done(chan);
 	}
-		
-	if(altered&chan->dcdcheck)
+
+	if (altered & chan->dcdcheck)
 	{
-		if(status&chan->dcdcheck)
-		{
+		if (status & chan->dcdcheck) {
 			printk(KERN_INFO "%s: DCD raised\n", chan->dev->name);
-			write_zsreg(chan, R3, chan->regs[3]|RxENABLE);
-			if(chan->netdevice &&
-			    ((chan->netdevice->type == ARPHRD_HDLC) ||
-			    (chan->netdevice->type == ARPHRD_PPP)))
-				sppp_reopen(chan->netdevice);
-		}
-		else
-		{
+			write_zsreg(chan, R3, chan->regs[3] | RxENABLE);
+			if (chan->netdevice)
+				netif_carrier_on(chan->netdevice);
+		} else {
 			printk(KERN_INFO "%s: DCD lost\n", chan->dev->name);
-			write_zsreg(chan, R3, chan->regs[3]&~RxENABLE);
+			write_zsreg(chan, R3, chan->regs[3] & ~RxENABLE);
 			z8530_flush_fifo(chan);
+			if (chan->netdevice)
+				netif_carrier_off(chan->netdevice);
 		}
-		
-	}	
+
+	}
 	write_zsctrl(chan, RES_EXT_INT);
 	write_zsctrl(chan, RES_H_IUS);
 }
 
-struct z8530_irqhandler z8530_sync=
+struct z8530_irqhandler z8530_sync =
 {
 	z8530_rx,
 	z8530_tx,
@@ -556,8 +551,7 @@ static void z8530_dma_tx(struct z8530_channel *chan)
  *	
  *	A status event occurred on the Z8530. We receive these for two reasons
  *	when in DMA mode. Firstly if we finished a packet transfer we get one
- *	and kick the next packet out. Secondly we may see a DCD change and
- *	have to poke the protocol layer.
+ *	and kick the next packet out. Secondly we may see a DCD change.
  *
  */
  
@@ -586,24 +580,21 @@ static void z8530_dma_status(struct z8530_channel *chan)
 		}
 	}
 
-	if(altered&chan->dcdcheck)
+	if (altered & chan->dcdcheck)
 	{
-		if(status&chan->dcdcheck)
-		{
+		if (status & chan->dcdcheck) {
 			printk(KERN_INFO "%s: DCD raised\n", chan->dev->name);
-			write_zsreg(chan, R3, chan->regs[3]|RxENABLE);
-			if(chan->netdevice &&
-			    ((chan->netdevice->type == ARPHRD_HDLC) ||
-			    (chan->netdevice->type == ARPHRD_PPP)))
-				sppp_reopen(chan->netdevice);
-		}
-		else
-		{
+			write_zsreg(chan, R3, chan->regs[3] | RxENABLE);
+			if (chan->netdevice)
+				netif_carrier_on(chan->netdevice);
+		} else {
 			printk(KERN_INFO "%s:DCD lost\n", chan->dev->name);
-			write_zsreg(chan, R3, chan->regs[3]&~RxENABLE);
+			write_zsreg(chan, R3, chan->regs[3] & ~RxENABLE);
 			z8530_flush_fifo(chan);
+			if (chan->netdevice)
+				netif_carrier_off(chan->netdevice);
 		}
-	}	
+	}
 
 	write_zsctrl(chan, RES_EXT_INT);
 	write_zsctrl(chan, RES_H_IUS);
@@ -1459,10 +1450,10 @@ static void z8530_tx_begin(struct z8530_channel *c)
 			/*
 			 *	Check if we crapped out.
 			 */
-			if(get_dma_residue(c->txdma))
+			if (get_dma_residue(c->txdma))
 			{
-				c->stats.tx_dropped++;
-				c->stats.tx_fifo_errors++;
+				c->netdevice->stats.tx_dropped++;
+				c->netdevice->stats.tx_fifo_errors++;
 			}
 			release_dma_lock(flags);
 		}
@@ -1534,21 +1525,21 @@ static void z8530_tx_begin(struct z8530_channel *c)
  *	packet. This code is fairly timing sensitive.
  *
  *	Called with the register lock held.
- */ 
- 
+ */
+
 static void z8530_tx_done(struct z8530_channel *c)
 {
 	struct sk_buff *skb;
 
 	/* Actually this can happen.*/
-	if(c->tx_skb==NULL)
+	if (c->tx_skb == NULL)
 		return;
 
-	skb=c->tx_skb;
-	c->tx_skb=NULL;
+	skb = c->tx_skb;
+	c->tx_skb = NULL;
 	z8530_tx_begin(c);
-	c->stats.tx_packets++;
-	c->stats.tx_bytes+=skb->len;
+	c->netdevice->stats.tx_packets++;
+	c->netdevice->stats.tx_bytes += skb->len;
 	dev_kfree_skb_irq(skb);
 }
 
@@ -1558,7 +1549,7 @@ static void z8530_tx_done(struct z8530_channel *c)
  *	@skb: The buffer
  *
  *	We point the receive handler at this function when idle. Instead
- *	of syncppp processing the frames we get to throw them away.
+ *	of processing the frames we get to throw them away.
  */
  
 void z8530_null_rx(struct z8530_channel *c, struct sk_buff *skb)
@@ -1635,10 +1626,11 @@ static void z8530_rx_done(struct z8530_channel *c)
 		else
 			/* Can't occur as we dont reenable the DMA irq until
 			   after the flip is done */
-			printk(KERN_WARNING "%s: DMA flip overrun!\n", c->netdevice->name);
-			
+			printk(KERN_WARNING "%s: DMA flip overrun!\n",
+			       c->netdevice->name);
+
 		release_dma_lock(flags);
-		
+
 		/*
 		 *	Shove the old buffer into an sk_buff. We can't DMA
 		 *	directly into one on a PC - it might be above the 16Mb
@@ -1646,27 +1638,23 @@ static void z8530_rx_done(struct z8530_channel *c)
 		 *	can avoid the copy. Optimisation 2 - make the memcpy
 		 *	a copychecksum.
 		 */
-		 
-		skb=dev_alloc_skb(ct);
-		if(skb==NULL)
-		{
-			c->stats.rx_dropped++;
-			printk(KERN_WARNING "%s: Memory squeeze.\n", c->netdevice->name);
-		}
-		else
-		{
+
+		skb = dev_alloc_skb(ct);
+		if (skb == NULL) {
+			c->netdevice->stats.rx_dropped++;
+			printk(KERN_WARNING "%s: Memory squeeze.\n",
+			       c->netdevice->name);
+		} else {
 			skb_put(skb, ct);
 			skb_copy_to_linear_data(skb, rxb, ct);
-			c->stats.rx_packets++;
-			c->stats.rx_bytes+=ct;
+			c->netdevice->stats.rx_packets++;
+			c->netdevice->stats.rx_bytes += ct;
 		}
-		c->dma_ready=1;
-	}
-	else
-	{
-		RT_LOCK;	
-		skb=c->skb;
-		
+		c->dma_ready = 1;
+	} else {
+		RT_LOCK;
+		skb = c->skb;
+
 		/*
 		 *	The game we play for non DMA is similar. We want to
 		 *	get the controller set up for the next packet as fast
@@ -1677,48 +1665,39 @@ static void z8530_rx_done(struct z8530_channel *c)
 		 *	if you build a system where the sync irq isnt blocked
 		 *	by the kernel IRQ disable then you need only block the
 		 *	sync IRQ for the RT_LOCK area.
-		 *	
+		 *
 		 */
 		ct=c->count;
-		
+
 		c->skb = c->skb2;
 		c->count = 0;
 		c->max = c->mtu;
-		if(c->skb)
-		{
+		if (c->skb) {
 			c->dptr = c->skb->data;
 			c->max = c->mtu;
-		}
-		else
-		{
-			c->count= 0;
+		} else {
+			c->count = 0;
 			c->max = 0;
 		}
 		RT_UNLOCK;
 
 		c->skb2 = dev_alloc_skb(c->mtu);
-		if(c->skb2==NULL)
+		if (c->skb2 == NULL)
 			printk(KERN_WARNING "%s: memory squeeze.\n",
-				c->netdevice->name);
+			       c->netdevice->name);
 		else
-		{
-			skb_put(c->skb2,c->mtu);
-		}
-		c->stats.rx_packets++;
-		c->stats.rx_bytes+=ct;
-		
+			skb_put(c->skb2, c->mtu);
+		c->netdevice->stats.rx_packets++;
+		c->netdevice->stats.rx_bytes += ct;
 	}
 	/*
 	 *	If we received a frame we must now process it.
 	 */
-	if(skb)
-	{
+	if (skb) {
 		skb_trim(skb, ct);
-		c->rx_function(c,skb);
-	}
-	else
-	{
-		c->stats.rx_dropped++;
+		c->rx_function(c, skb);
+	} else {
+		c->netdevice->stats.rx_dropped++;
 		printk(KERN_ERR "%s: Lost a frame\n", c->netdevice->name);
 	}
 }
@@ -1730,7 +1709,7 @@ static void z8530_rx_done(struct z8530_channel *c)
  *	Returns true if the buffer cross a DMA boundary on a PC. The poor
  *	thing can only DMA within a 64K block not across the edges of it.
  */
- 
+
 static inline int spans_boundary(struct sk_buff *skb)
 {
 	unsigned long a=(unsigned long)skb->data;
@@ -1799,24 +1778,6 @@ int z8530_queue_xmit(struct z8530_channel *c, struct sk_buff *skb)
 
 EXPORT_SYMBOL(z8530_queue_xmit);
 
-/**
- *	z8530_get_stats - Get network statistics
- *	@c: The channel to use
- *
- *	Get the statistics block. We keep the statistics in software as
- *	the chip doesn't do it for us.
- *
- *	Locking is ignored here - we could lock for a copy but its
- *	not likely to be that big an issue
- */
- 
-struct net_device_stats *z8530_get_stats(struct z8530_channel *c)
-{
-	return &c->stats;
-}
-
-EXPORT_SYMBOL(z8530_get_stats);
-
 /*
  *	Module support
  */
diff --git a/drivers/net/wan/z85230.h b/drivers/net/wan/z85230.h
index 158aea7b8eac..4f372396c512 100644
--- a/drivers/net/wan/z85230.h
+++ b/drivers/net/wan/z85230.h
@@ -325,7 +325,6 @@ struct z8530_channel
 
 	void		*private;	/* For our owner */
 	struct net_device	*netdevice;	/* Network layer device */
-	struct net_device_stats stats;	/* Network layer statistics */
 
 	/*
 	 *	Async features
@@ -366,13 +365,13 @@ struct z8530_channel
 	unsigned char		tx_active; /* character is being xmitted */
 	unsigned char		tx_stopped; /* output is suspended */
 
-	spinlock_t		*lock;	  /* Devicr lock */
-};	
+	spinlock_t		*lock;	  /* Device lock */
+};
 
 /*
  *	Each Z853x0 device.
- */	
- 
+ */
+
 struct z8530_dev
 {
 	char *name;	/* Device instance name */
@@ -408,7 +407,6 @@ extern int z8530_sync_txdma_open(struct net_device *, struct z8530_channel *);
 extern int z8530_sync_txdma_close(struct net_device *, struct z8530_channel *);
 extern int z8530_channel_load(struct z8530_channel *, u8 *);
 extern int z8530_queue_xmit(struct z8530_channel *c, struct sk_buff *skb);
-extern struct net_device_stats *z8530_get_stats(struct z8530_channel *c);
 extern void z8530_null_rx(struct z8530_channel *c, struct sk_buff *skb);
 
 
diff --git a/drivers/net/wireless/Kconfig b/drivers/net/wireless/Kconfig
index 91fc2c765d90..9931b5ab59cd 100644
--- a/drivers/net/wireless/Kconfig
+++ b/drivers/net/wireless/Kconfig
@@ -649,6 +649,7 @@ config RTL8187
 	  Trendnet TEW-424UB
 	  ASUS P5B Deluxe
 	  Toshiba Satellite Pro series of laptops
+	  Asus Wireless Link
 
 	  Thanks to Realtek for their support!
 
@@ -694,6 +695,7 @@ config MAC80211_HWSIM
 
 source "drivers/net/wireless/p54/Kconfig"
 source "drivers/net/wireless/ath5k/Kconfig"
+source "drivers/net/wireless/ath9k/Kconfig"
 source "drivers/net/wireless/iwlwifi/Kconfig"
 source "drivers/net/wireless/hostap/Kconfig"
 source "drivers/net/wireless/b43/Kconfig"
diff --git a/drivers/net/wireless/Makefile b/drivers/net/wireless/Makefile
index 54a4f6f1db67..59aa89ec6e81 100644
--- a/drivers/net/wireless/Makefile
+++ b/drivers/net/wireless/Makefile
@@ -62,5 +62,6 @@ obj-$(CONFIG_RT2X00)	+= rt2x00/
 obj-$(CONFIG_P54_COMMON)	+= p54/
 
 obj-$(CONFIG_ATH5K)	+= ath5k/
+obj-$(CONFIG_ATH9K)	+= ath9k/
 
 obj-$(CONFIG_MAC80211_HWSIM)	+= mac80211_hwsim.o
diff --git a/drivers/net/wireless/ath5k/ath5k.h b/drivers/net/wireless/ath5k/ath5k.h
index ba35c30d203c..9102eea3c8bf 100644
--- a/drivers/net/wireless/ath5k/ath5k.h
+++ b/drivers/net/wireless/ath5k/ath5k.h
@@ -186,11 +186,13 @@ struct ath5k_srev_name {
 #define AR5K_SREV_RAD_2111	0x20
 #define AR5K_SREV_RAD_5112	0x30
 #define AR5K_SREV_RAD_5112A	0x35
+#define	AR5K_SREV_RAD_5112B	0x36
 #define AR5K_SREV_RAD_2112	0x40
 #define AR5K_SREV_RAD_2112A	0x45
-#define AR5K_SREV_RAD_SC0	0x56	/* Found on 2413/2414 */
-#define AR5K_SREV_RAD_SC1	0x63	/* Found on 5413/5414 */
-#define AR5K_SREV_RAD_SC2	0xa2	/* Found on 2424-5/5424 */
+#define	AR5K_SREV_RAD_2112B	0x46
+#define AR5K_SREV_RAD_SC0	0x50	/* Found on 2413/2414 */
+#define AR5K_SREV_RAD_SC1	0x60	/* Found on 5413/5414 */
+#define AR5K_SREV_RAD_SC2	0xa0	/* Found on 2424-5/5424 */
 #define AR5K_SREV_RAD_5133	0xc0	/* MIMO found on 5418 */
 
 /* IEEE defs */
diff --git a/drivers/net/wireless/ath5k/base.c b/drivers/net/wireless/ath5k/base.c
index 217d506527a9..0676c6d84383 100644
--- a/drivers/net/wireless/ath5k/base.c
+++ b/drivers/net/wireless/ath5k/base.c
@@ -40,10 +40,11 @@
  *
  */
 
-#include <linux/version.h>
 #include <linux/module.h>
 #include <linux/delay.h>
+#include <linux/hardirq.h>
 #include <linux/if.h>
+#include <linux/io.h>
 #include <linux/netdevice.h>
 #include <linux/cache.h>
 #include <linux/pci.h>
@@ -93,8 +94,6 @@ static struct pci_device_id ath5k_pci_id_table[] __devinitdata = {
 	{ PCI_VDEVICE(ATHEROS, 0x001a), .driver_data = AR5K_AR5212 }, /* 2413 Griffin-lite */
 	{ PCI_VDEVICE(ATHEROS, 0x001b), .driver_data = AR5K_AR5212 }, /* 5413 Eagle */
 	{ PCI_VDEVICE(ATHEROS, 0x001c), .driver_data = AR5K_AR5212 }, /* 5424 Condor (PCI-E)*/
-	{ PCI_VDEVICE(ATHEROS, 0x0023), .driver_data = AR5K_AR5212 }, /* 5416 */
-	{ PCI_VDEVICE(ATHEROS, 0x0024), .driver_data = AR5K_AR5212 }, /* 5418 */
 	{ 0 }
 };
 MODULE_DEVICE_TABLE(pci, ath5k_pci_id_table);
@@ -252,7 +251,7 @@ static inline void ath5k_txbuf_free(struct ath5k_softc *sc,
 		return;
 	pci_unmap_single(sc->pdev, bf->skbaddr, bf->skb->len,
 			PCI_DMA_TODEVICE);
-	dev_kfree_skb(bf->skb);
+	dev_kfree_skb_any(bf->skb);
 	bf->skb = NULL;
 }
 
@@ -467,13 +466,11 @@ ath5k_pci_probe(struct pci_dev *pdev,
 	mutex_init(&sc->lock);
 	spin_lock_init(&sc->rxbuflock);
 	spin_lock_init(&sc->txbuflock);
+	spin_lock_init(&sc->block);
 
 	/* Set private data */
 	pci_set_drvdata(pdev, hw);
 
-	/* Enable msi for devices that support it */
-	pci_enable_msi(pdev);
-
 	/* Setup interrupt handler */
 	ret = request_irq(pdev->irq, ath5k_intr, IRQF_SHARED, "ath", sc);
 	if (ret) {
@@ -551,7 +548,6 @@ err_ah:
 err_irq:
 	free_irq(pdev->irq, sc);
 err_free:
-	pci_disable_msi(pdev);
 	ieee80211_free_hw(hw);
 err_map:
 	pci_iounmap(pdev, mem);
@@ -573,7 +569,6 @@ ath5k_pci_remove(struct pci_dev *pdev)
 	ath5k_detach(pdev, hw);
 	ath5k_hw_detach(sc->ah);
 	free_irq(pdev->irq, sc);
-	pci_disable_msi(pdev);
 	pci_iounmap(pdev, sc->iobase);
 	pci_release_region(pdev, 0);
 	pci_disable_device(pdev);
@@ -590,6 +585,8 @@ ath5k_pci_suspend(struct pci_dev *pdev, pm_message_t state)
 	ath5k_led_off(sc);
 
 	ath5k_stop_hw(sc);
+
+	free_irq(pdev->irq, sc);
 	pci_save_state(pdev);
 	pci_disable_device(pdev);
 	pci_set_power_state(pdev, PCI_D3hot);
@@ -605,15 +602,12 @@ ath5k_pci_resume(struct pci_dev *pdev)
 	struct ath5k_hw *ah = sc->ah;
 	int i, err;
 
-	err = pci_set_power_state(pdev, PCI_D0);
-	if (err)
-		return err;
+	pci_restore_state(pdev);
 
 	err = pci_enable_device(pdev);
 	if (err)
 		return err;
 
-	pci_restore_state(pdev);
 	/*
 	 * Suspend/Resume resets the PCI configuration space, so we have to
 	 * re-disable the RETRY_TIMEOUT register (0x41) to keep
@@ -621,7 +615,15 @@ ath5k_pci_resume(struct pci_dev *pdev)
 	 */
 	pci_write_config_byte(pdev, 0x41, 0);
 
-	ath5k_init(sc);
+	err = request_irq(pdev->irq, ath5k_intr, IRQF_SHARED, "ath", sc);
+	if (err) {
+		ATH5K_ERR(sc, "request_irq failed\n");
+		goto err_no_irq;
+	}
+
+	err = ath5k_init(sc);
+	if (err)
+		goto err_irq;
 	ath5k_led_enable(sc);
 
 	/*
@@ -635,6 +637,11 @@ ath5k_pci_resume(struct pci_dev *pdev)
 		ath5k_hw_reset_key(ah, i);
 
 	return 0;
+err_irq:
+	free_irq(pdev->irq, sc);
+err_no_irq:
+	pci_disable_device(pdev);
+	return err;
 }
 #endif /* CONFIG_PM */
 
@@ -1166,7 +1173,7 @@ ath5k_rxbuf_setup(struct ath5k_softc *sc, struct ath5k_buf *bf)
 		bf->skb = skb;
 		bf->skbaddr = pci_map_single(sc->pdev,
 			skb->data, sc->rxbufsize, PCI_DMA_FROMDEVICE);
-		if (unlikely(pci_dma_mapping_error(bf->skbaddr))) {
+		if (unlikely(pci_dma_mapping_error(sc->pdev, bf->skbaddr))) {
 			ATH5K_ERR(sc, "%s: DMA mapping failed\n", __func__);
 			dev_kfree_skb(skb);
 			bf->skb = NULL;
@@ -1224,7 +1231,7 @@ ath5k_txbuf_setup(struct ath5k_softc *sc, struct ath5k_buf *bf)
 
 	pktlen = skb->len;
 
-	if (!(info->flags & IEEE80211_TX_CTL_DO_NOT_ENCRYPT)) {
+	if (info->control.hw_key) {
 		keyidx = info->control.hw_key->hw_key_idx;
 		pktlen += info->control.icv_len;
 	}
@@ -1249,6 +1256,7 @@ ath5k_txbuf_setup(struct ath5k_softc *sc, struct ath5k_buf *bf)
 
 	txq->link = &ds->ds_link;
 	ath5k_hw_tx_start(ah, txq->qnum);
+	mmiowb();
 	spin_unlock_bh(&txq->lock);
 
 	return 0;
@@ -1583,7 +1591,6 @@ ath5k_rx_stop(struct ath5k_softc *sc)
 	ath5k_hw_stop_pcu_recv(ah);	/* disable PCU */
 	ath5k_hw_set_rx_filter(ah, 0);	/* clear recv filter */
 	ath5k_hw_stop_rx_dma(ah);	/* disable DMA engine */
-	mdelay(3);			/* 3ms is long enough for 1 frame */
 
 	ath5k_debug_printrxbuffs(sc, ah);
 
@@ -1682,31 +1689,44 @@ ath5k_tasklet_rx(unsigned long data)
 	struct ath5k_rx_status rs = {};
 	struct sk_buff *skb;
 	struct ath5k_softc *sc = (void *)data;
-	struct ath5k_buf *bf;
+	struct ath5k_buf *bf, *bf_last;
 	struct ath5k_desc *ds;
 	int ret;
 	int hdrlen;
 	int pad;
 
 	spin_lock(&sc->rxbuflock);
+	if (list_empty(&sc->rxbuf)) {
+		ATH5K_WARN(sc, "empty rx buf pool\n");
+		goto unlock;
+	}
+	bf_last = list_entry(sc->rxbuf.prev, struct ath5k_buf, list);
 	do {
 		rxs.flag = 0;
 
-		if (unlikely(list_empty(&sc->rxbuf))) {
-			ATH5K_WARN(sc, "empty rx buf pool\n");
-			break;
-		}
 		bf = list_first_entry(&sc->rxbuf, struct ath5k_buf, list);
 		BUG_ON(bf->skb == NULL);
 		skb = bf->skb;
 		ds = bf->desc;
 
-		/* TODO only one segment */
-		pci_dma_sync_single_for_cpu(sc->pdev, sc->desc_daddr,
-				sc->desc_len, PCI_DMA_FROMDEVICE);
-
-		if (unlikely(ds->ds_link == bf->daddr)) /* this is the end */
-			break;
+		/*
+		 * last buffer must not be freed to ensure proper hardware
+		 * function. When the hardware finishes also a packet next to
+		 * it, we are sure, it doesn't use it anymore and we can go on.
+		 */
+		if (bf_last == bf)
+			bf->flags |= 1;
+		if (bf->flags) {
+			struct ath5k_buf *bf_next = list_entry(bf->list.next,
+					struct ath5k_buf, list);
+			ret = sc->ah->ah_proc_rx_desc(sc->ah, bf_next->desc,
+					&rs);
+			if (ret)
+				break;
+			bf->flags &= ~1;
+			/* skip the overwritten one (even status is martian) */
+			goto next;
+		}
 
 		ret = sc->ah->ah_proc_rx_desc(sc->ah, ds, &rs);
 		if (unlikely(ret == -EINPROGRESS))
@@ -1752,8 +1772,6 @@ ath5k_tasklet_rx(unsigned long data)
 				goto next;
 		}
 accept:
-		pci_dma_sync_single_for_cpu(sc->pdev, bf->skbaddr,
-				rs.rs_datalen, PCI_DMA_FROMDEVICE);
 		pci_unmap_single(sc->pdev, bf->skbaddr, sc->rxbufsize,
 				PCI_DMA_FROMDEVICE);
 		bf->skb = NULL;
@@ -1816,6 +1834,7 @@ accept:
 next:
 		list_move_tail(&bf->list, &sc->rxbuf);
 	} while (ath5k_rxbuf_setup(sc, bf) == 0);
+unlock:
 	spin_unlock(&sc->rxbuflock);
 }
 
@@ -1840,9 +1859,6 @@ ath5k_tx_processq(struct ath5k_softc *sc, struct ath5k_txq *txq)
 	list_for_each_entry_safe(bf, bf0, &txq->q, list) {
 		ds = bf->desc;
 
-		/* TODO only one segment */
-		pci_dma_sync_single_for_cpu(sc->pdev, sc->desc_daddr,
-				sc->desc_len, PCI_DMA_FROMDEVICE);
 		ret = sc->ah->ah_proc_tx_desc(sc->ah, ds, &ts);
 		if (unlikely(ret == -EINPROGRESS))
 			break;
@@ -1918,7 +1934,7 @@ ath5k_beacon_setup(struct ath5k_softc *sc, struct ath5k_buf *bf)
 	ATH5K_DBG(sc, ATH5K_DEBUG_BEACON, "skb %p [data %p len %u] "
 			"skbaddr %llx\n", skb, skb->data, skb->len,
 			(unsigned long long)bf->skbaddr);
-	if (pci_dma_mapping_error(bf->skbaddr)) {
+	if (pci_dma_mapping_error(sc->pdev, bf->skbaddr)) {
 		ATH5K_ERR(sc, "beacon DMA mapping failed\n");
 		return -EIO;
 	}
@@ -2015,8 +2031,6 @@ ath5k_beacon_send(struct ath5k_softc *sc)
 		ATH5K_WARN(sc, "beacon queue %u didn't stop?\n", sc->bhalq);
 		/* NB: hw still stops DMA, so proceed */
 	}
-	pci_dma_sync_single_for_cpu(sc->pdev, bf->skbaddr, bf->skb->len,
-			PCI_DMA_TODEVICE);
 
 	ath5k_hw_put_tx_buf(ah, sc->bhalq, bf->daddr);
 	ath5k_hw_tx_start(ah, sc->bhalq);
@@ -2150,6 +2164,7 @@ ath5k_beacon_config(struct ath5k_softc *sc)
 
 	ath5k_hw_set_intr(ah, 0);
 	sc->bmisscount = 0;
+	sc->imask &= ~(AR5K_INT_BMISS | AR5K_INT_SWBA);
 
 	if (sc->opmode == IEEE80211_IF_TYPE_STA) {
 		sc->imask |= AR5K_INT_BMISS;
@@ -2165,8 +2180,11 @@ ath5k_beacon_config(struct ath5k_softc *sc)
 
 		sc->imask |= AR5K_INT_SWBA;
 
-		if (ath5k_hw_hasveol(ah))
+		if (ath5k_hw_hasveol(ah)) {
+			spin_lock(&sc->block);
 			ath5k_beacon_send(sc);
+			spin_unlock(&sc->block);
+		}
 	}
 	/* TODO else AP */
 
@@ -2240,6 +2258,7 @@ ath5k_init(struct ath5k_softc *sc)
 
 	ret = 0;
 done:
+	mmiowb();
 	mutex_unlock(&sc->lock);
 	return ret;
 }
@@ -2272,6 +2291,7 @@ ath5k_stop_locked(struct ath5k_softc *sc)
 	if (!test_bit(ATH_STAT_INVALID, sc->status)) {
 		ath5k_led_off(sc);
 		ath5k_hw_set_intr(ah, 0);
+		synchronize_irq(sc->pdev->irq);
 	}
 	ath5k_txq_cleanup(sc);
 	if (!test_bit(ATH_STAT_INVALID, sc->status)) {
@@ -2321,9 +2341,13 @@ ath5k_stop_hw(struct ath5k_softc *sc)
 		}
 	}
 	ath5k_txbuf_free(sc, sc->bbuf);
+	mmiowb();
 	mutex_unlock(&sc->lock);
 
 	del_timer_sync(&sc->calib_tim);
+	tasklet_kill(&sc->rxtq);
+	tasklet_kill(&sc->txtq);
+	tasklet_kill(&sc->restq);
 
 	return ret;
 }
@@ -2383,7 +2407,9 @@ ath5k_intr(int irq, void *dev_id)
 						  TSF_TO_TU(tsf),
 						  (unsigned long long) tsf);
 				} else {
+					spin_lock(&sc->block);
 					ath5k_beacon_send(sc);
+					spin_unlock(&sc->block);
 				}
 			}
 			if (status & AR5K_INT_RXEOL) {
@@ -2550,8 +2576,6 @@ ath5k_init_leds(struct ath5k_softc *sc)
 	struct pci_dev *pdev = sc->pdev;
 	char name[ATH5K_LED_MAX_NAME_LEN + 1];
 
-	sc->led_on = 0;  /* active low */
-
 	/*
 	 * Auto-enable soft led processing for IBM cards and for
 	 * 5211 minipci cards.
@@ -2560,11 +2584,13 @@ ath5k_init_leds(struct ath5k_softc *sc)
 	    pdev->device == PCI_DEVICE_ID_ATHEROS_AR5211) {
 		__set_bit(ATH_STAT_LEDSOFT, sc->status);
 		sc->led_pin = 0;
+		sc->led_on = 0;  /* active low */
 	}
 	/* Enable softled on PIN1 on HP Compaq nc6xx, nc4000 & nx5000 laptops */
 	if (pdev->subsystem_vendor == PCI_VENDOR_ID_COMPAQ) {
 		__set_bit(ATH_STAT_LEDSOFT, sc->status);
 		sc->led_pin = 1;
+		sc->led_on = 1;  /* active high */
 	}
 	if (!test_bit(ATH_STAT_LEDSOFT, sc->status))
 		goto out;
@@ -2725,6 +2751,11 @@ static int ath5k_add_interface(struct ieee80211_hw *hw,
 		ret = -EOPNOTSUPP;
 		goto end;
 	}
+
+	/* Set to a reasonable value. Note that this will
+	 * be set to mac80211's value at ath5k_config(). */
+	sc->bintval = 1000;
+
 	ret = 0;
 end:
 	mutex_unlock(&sc->lock);
@@ -2769,9 +2800,6 @@ ath5k_config_interface(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
 	struct ath5k_hw *ah = sc->ah;
 	int ret;
 
-	/* Set to a reasonable value. Note that this will
-	 * be set to mac80211's value at ath5k_config(). */
-	sc->bintval = 1000;
 	mutex_lock(&sc->lock);
 	if (sc->vif != vif) {
 		ret = -EIO;
@@ -2783,6 +2811,7 @@ ath5k_config_interface(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
 		/* XXX: assoc id is set to 0 for now, mac80211 doesn't have
 		 * a clean way of letting us retrieve this yet. */
 		ath5k_hw_set_associd(ah, ah->ah_bssid, 0);
+		mmiowb();
 	}
 
 	if (conf->changed & IEEE80211_IFCC_BEACON &&
@@ -2971,6 +3000,7 @@ ath5k_set_key(struct ieee80211_hw *hw, enum set_key_cmd cmd,
 	}
 
 unlock:
+	mmiowb();
 	mutex_unlock(&sc->lock);
 	return ret;
 }
@@ -3028,27 +3058,29 @@ static int
 ath5k_beacon_update(struct ieee80211_hw *hw, struct sk_buff *skb)
 {
 	struct ath5k_softc *sc = hw->priv;
+	unsigned long flags;
 	int ret;
 
 	ath5k_debug_dump_skb(sc, skb, "BC  ", 1);
 
-	mutex_lock(&sc->lock);
-
 	if (sc->opmode != IEEE80211_IF_TYPE_IBSS) {
 		ret = -EIO;
 		goto end;
 	}
 
+	spin_lock_irqsave(&sc->block, flags);
 	ath5k_txbuf_free(sc, sc->bbuf);
 	sc->bbuf->skb = skb;
 	ret = ath5k_beacon_setup(sc, sc->bbuf);
 	if (ret)
 		sc->bbuf->skb = NULL;
-	else
+	spin_unlock_irqrestore(&sc->block, flags);
+	if (!ret) {
 		ath5k_beacon_config(sc);
+		mmiowb();
+	}
 
 end:
-	mutex_unlock(&sc->lock);
 	return ret;
 }
 
diff --git a/drivers/net/wireless/ath5k/base.h b/drivers/net/wireless/ath5k/base.h
index 47f414b09e67..7ec2f377d5c7 100644
--- a/drivers/net/wireless/ath5k/base.h
+++ b/drivers/net/wireless/ath5k/base.h
@@ -56,7 +56,7 @@
 
 struct ath5k_buf {
 	struct list_head	list;
-	unsigned int		flags;	/* tx descriptor flags */
+	unsigned int		flags;	/* rx descriptor flags */
 	struct ath5k_desc	*desc;	/* virtual addr of desc */
 	dma_addr_t		daddr;	/* physical addr of desc */
 	struct sk_buff		*skb;	/* skbuff for buf */
@@ -172,6 +172,7 @@ struct ath5k_softc {
 	struct tasklet_struct	txtq;		/* tx intr tasklet */
 	struct ath5k_led	tx_led;		/* tx led */
 
+	spinlock_t		block;		/* protects beacon */
 	struct ath5k_buf	*bbuf;		/* beacon buffer */
 	unsigned int		bhalq,		/* SW q for outgoing beacons */
 				bmisscount,	/* missed beacon transmits */
diff --git a/drivers/net/wireless/ath5k/debug.c b/drivers/net/wireless/ath5k/debug.c
index 41d5fa34b544..6fa6c8e04ff0 100644
--- a/drivers/net/wireless/ath5k/debug.c
+++ b/drivers/net/wireless/ath5k/debug.c
@@ -129,7 +129,7 @@ static struct reg regs[] = {
 	REG_STRUCT_INIT(AR5K_CPC1),
 	REG_STRUCT_INIT(AR5K_CPC2),
 	REG_STRUCT_INIT(AR5K_CPC3),
-	REG_STRUCT_INIT(AR5K_CPCORN),
+	REG_STRUCT_INIT(AR5K_CPCOVF),
 	REG_STRUCT_INIT(AR5K_RESET_CTL),
 	REG_STRUCT_INIT(AR5K_SLEEP_CTL),
 	REG_STRUCT_INIT(AR5K_INTPEND),
diff --git a/drivers/net/wireless/ath5k/debug.h b/drivers/net/wireless/ath5k/debug.h
index 2cf8d18b10e3..ffc529393306 100644
--- a/drivers/net/wireless/ath5k/debug.h
+++ b/drivers/net/wireless/ath5k/debug.h
@@ -63,7 +63,6 @@
 
 struct ath5k_softc;
 struct ath5k_hw;
-struct ieee80211_hw_mode;
 struct sk_buff;
 struct ath5k_buf;
 
diff --git a/drivers/net/wireless/ath5k/hw.c b/drivers/net/wireless/ath5k/hw.c
index c6d12c53bda4..ad1a5b422c8c 100644
--- a/drivers/net/wireless/ath5k/hw.c
+++ b/drivers/net/wireless/ath5k/hw.c
@@ -139,6 +139,8 @@ static int ath5k_hw_post(struct ath5k_hw *ah)
 	for (c = 0; c < 2; c++) {
 
 		cur_reg = regs[c];
+
+		/* Save previous value */
 		init_val = ath5k_hw_reg_read(ah, cur_reg);
 
 		for (i = 0; i < 256; i++) {
@@ -170,6 +172,10 @@ static int ath5k_hw_post(struct ath5k_hw *ah)
 			var_pattern = 0x003b080f;
 			ath5k_hw_reg_write(ah, var_pattern, cur_reg);
 		}
+
+		/* Restore previous value */
+		ath5k_hw_reg_write(ah, init_val, cur_reg);
+
 	}
 
 	return 0;
@@ -287,67 +293,42 @@ struct ath5k_hw *ath5k_hw_attach(struct ath5k_softc *sc, u8 mac_version)
 	/* Identify the radio chip*/
 	if (ah->ah_version == AR5K_AR5210) {
 		ah->ah_radio = AR5K_RF5110;
+	/*
+	 * Register returns 0x0/0x04 for radio revision
+	 * so ath5k_hw_radio_revision doesn't parse the value
+	 * correctly. For now we are based on mac's srev to
+	 * identify RF2425 radio.
+	 */
+	} else if (srev == AR5K_SREV_VER_AR2425) {
+		ah->ah_radio = AR5K_RF2425;
+		ah->ah_phy_spending = AR5K_PHY_SPENDING_RF2425;
 	} else if (ah->ah_radio_5ghz_revision < AR5K_SREV_RAD_5112) {
 		ah->ah_radio = AR5K_RF5111;
 		ah->ah_phy_spending = AR5K_PHY_SPENDING_RF5111;
 	} else if (ah->ah_radio_5ghz_revision < AR5K_SREV_RAD_SC0) {
-
 		ah->ah_radio = AR5K_RF5112;
-
-		if (ah->ah_radio_5ghz_revision < AR5K_SREV_RAD_5112A) {
-			ah->ah_phy_spending = AR5K_PHY_SPENDING_RF5112;
-		} else {
-			ah->ah_phy_spending = AR5K_PHY_SPENDING_RF5112A;
-		}
-
+		ah->ah_phy_spending = AR5K_PHY_SPENDING_RF5112;
 	} else if (ah->ah_radio_5ghz_revision < AR5K_SREV_RAD_SC1) {
 		ah->ah_radio = AR5K_RF2413;
-		ah->ah_phy_spending = AR5K_PHY_SPENDING_RF5112A;
+		ah->ah_phy_spending = AR5K_PHY_SPENDING_RF2413;
 	} else if (ah->ah_radio_5ghz_revision < AR5K_SREV_RAD_SC2) {
 		ah->ah_radio = AR5K_RF5413;
-		ah->ah_phy_spending = AR5K_PHY_SPENDING_RF5112A;
+		ah->ah_phy_spending = AR5K_PHY_SPENDING_RF5413;
 	} else if (ah->ah_radio_5ghz_revision < AR5K_SREV_RAD_5133) {
-
 		/* AR5424 */
 		if (srev >= AR5K_SREV_VER_AR5424) {
 			ah->ah_radio = AR5K_RF5413;
-			ah->ah_phy_spending = AR5K_PHY_SPENDING_RF5424;
+			ah->ah_phy_spending = AR5K_PHY_SPENDING_RF5413;
 		/* AR2424 */
 		} else {
 			ah->ah_radio = AR5K_RF2413; /* For testing */
-			ah->ah_phy_spending = AR5K_PHY_SPENDING_RF5112A;
+			ah->ah_phy_spending = AR5K_PHY_SPENDING_RF2413;
 		}
-
-	/*
-	 * Register returns 0x4 for radio revision
-	 * so ath5k_hw_radio_revision doesn't parse the value
-	 * correctly. For now we are based on mac's srev to
-	 * identify RF2425 radio.
-	 */
-	} else if (srev == AR5K_SREV_VER_AR2425) {
-		ah->ah_radio = AR5K_RF2425;
-		ah->ah_phy_spending = AR5K_PHY_SPENDING_RF5112;
 	}
-
 	ah->ah_phy = AR5K_PHY(0);
 
 	/*
-	 * Identify AR5212-based PCI-E cards
-	 * And write some initial settings.
-	 *
-	 * (doing a "strings" on ndis driver
-	 * -ar5211.sys- reveals the following
-	 * pci-e related functions:
-	 *
-	 * pcieClockReq
-	 * pcieRxErrNotify
-	 * pcieL1SKPEnable
-	 * pcieAspm
-	 * pcieDisableAspmOnRfWake
-	 * pciePowerSaveEnable
-	 *
-	 * I guess these point to ClockReq but
-	 * i'm not sure.)
+	 * Write PCI-E power save settings
 	 */
 	if ((ah->ah_version == AR5K_AR5212) && (pdev->is_pcie)) {
 		ath5k_hw_reg_write(ah, 0x9248fc00, 0x4080);
@@ -369,10 +350,15 @@ struct ath5k_hw *ath5k_hw_attach(struct ath5k_softc *sc, u8 mac_version)
 	if (ret)
 		goto err_free;
 
+	/* Write AR5K_PCICFG_UNK on 2112B and later chips */
+	if (ah->ah_radio_5ghz_revision > AR5K_SREV_RAD_2112B ||
+	srev > AR5K_SREV_VER_AR2413) {
+		ath5k_hw_reg_write(ah, AR5K_PCICFG_UNK, AR5K_PCICFG);
+	}
+
 	/*
 	 * Get card capabilities, values, ...
 	 */
-
 	ret = ath5k_eeprom_init(ah);
 	if (ret) {
 		ATH5K_ERR(sc, "unable to init EEPROM\n");
@@ -843,27 +829,41 @@ int ath5k_hw_reset(struct ath5k_hw *ah, enum ieee80211_if_types op_mode,
 		 * Write some more initial register settings
 		 */
 		if (ah->ah_version == AR5K_AR5212) {
-			ath5k_hw_reg_write(ah, 0x0002a002, AR5K_PHY(11));
+			ath5k_hw_reg_write(ah, 0x0002a002, 0x982c);
 
 			if (channel->hw_value == CHANNEL_G)
 				if (ah->ah_mac_srev < AR5K_SREV_VER_AR2413)
 					ath5k_hw_reg_write(ah, 0x00f80d80,
-						AR5K_PHY(83));
+								0x994c);
 				else if (ah->ah_mac_srev < AR5K_SREV_VER_AR2424)
 					ath5k_hw_reg_write(ah, 0x00380140,
-						AR5K_PHY(83));
+								0x994c);
 				else if (ah->ah_mac_srev < AR5K_SREV_VER_AR2425)
 					ath5k_hw_reg_write(ah, 0x00fc0ec0,
-						AR5K_PHY(83));
+								0x994c);
 				else /* 2425 */
 					ath5k_hw_reg_write(ah, 0x00fc0fc0,
-						AR5K_PHY(83));
+								0x994c);
 			else
-				ath5k_hw_reg_write(ah, 0x00000000,
-					AR5K_PHY(83));
-
-			ath5k_hw_reg_write(ah, 0x000009b5, 0xa228);
-			ath5k_hw_reg_write(ah, 0x0000000f, 0x8060);
+				ath5k_hw_reg_write(ah, 0x00000000, 0x994c);
+
+			/* Some bits are disabled here, we know nothing about
+			 * register 0xa228 yet, most of the times this ends up
+			 * with a value 0x9b5 -haven't seen any dump with
+			 * a different value- */
+			/* Got this from decompiling binary HAL */
+			data = ath5k_hw_reg_read(ah, 0xa228);
+			data &= 0xfffffdff;
+			ath5k_hw_reg_write(ah, data, 0xa228);
+
+			data = ath5k_hw_reg_read(ah, 0xa228);
+			data &= 0xfffe03ff;
+			ath5k_hw_reg_write(ah, data, 0xa228);
+			data = 0;
+
+			/* Just write 0x9b5 ? */
+			/* ath5k_hw_reg_write(ah, 0x000009b5, 0xa228); */
+			ath5k_hw_reg_write(ah, 0x0000000f, AR5K_SEQ_MASK);
 			ath5k_hw_reg_write(ah, 0x00000000, 0xa254);
 			ath5k_hw_reg_write(ah, 0x0000000e, AR5K_PHY_SCAL);
 		}
@@ -879,6 +879,7 @@ int ath5k_hw_reset(struct ath5k_hw *ah, enum ieee80211_if_types op_mode,
 			else
 				data = 0xffb80d20;
 			ath5k_hw_reg_write(ah, data, AR5K_PHY_FRAME_CTL);
+			data = 0;
 		}
 
 		/*
@@ -898,7 +899,6 @@ int ath5k_hw_reset(struct ath5k_hw *ah, enum ieee80211_if_types op_mode,
 
 		/*
 		 * Write RF registers
-		 * TODO:Does this work on 5211 (5111) ?
 		 */
 		ret = ath5k_hw_rfregs(ah, channel, mode);
 		if (ret)
@@ -935,7 +935,7 @@ int ath5k_hw_reset(struct ath5k_hw *ah, enum ieee80211_if_types op_mode,
 			return ret;
 
 		/* Set antenna mode */
-		AR5K_REG_MASKED_BITS(ah, AR5K_PHY(0x44),
+		AR5K_REG_MASKED_BITS(ah, AR5K_PHY_ANT_CTL,
 			ah->ah_antenna[ee_mode][0], 0xfffffc06);
 
 		/*
@@ -965,15 +965,15 @@ int ath5k_hw_reset(struct ath5k_hw *ah, enum ieee80211_if_types op_mode,
 
 		ath5k_hw_reg_write(ah,
 			AR5K_PHY_NF_SVAL(ee->ee_noise_floor_thr[ee_mode]),
-			AR5K_PHY(0x5a));
+			AR5K_PHY_NFTHRES);
 
-		AR5K_REG_MASKED_BITS(ah, AR5K_PHY(0x11),
+		AR5K_REG_MASKED_BITS(ah, AR5K_PHY_SETTLING,
 			(ee->ee_switch_settling[ee_mode] << 7) & 0x3f80,
 			0xffffc07f);
-		AR5K_REG_MASKED_BITS(ah, AR5K_PHY(0x12),
+		AR5K_REG_MASKED_BITS(ah, AR5K_PHY_GAIN,
 			(ee->ee_ant_tx_rx[ee_mode] << 12) & 0x3f000,
 			0xfffc0fff);
-		AR5K_REG_MASKED_BITS(ah, AR5K_PHY(0x14),
+		AR5K_REG_MASKED_BITS(ah, AR5K_PHY_DESIRED_SIZE,
 			(ee->ee_adc_desired_size[ee_mode] & 0x00ff) |
 			((ee->ee_pga_desired_size[ee_mode] << 8) & 0xff00),
 			0xffff0000);
@@ -982,13 +982,13 @@ int ath5k_hw_reset(struct ath5k_hw *ah, enum ieee80211_if_types op_mode,
 			(ee->ee_tx_end2xpa_disable[ee_mode] << 24) |
 			(ee->ee_tx_end2xpa_disable[ee_mode] << 16) |
 			(ee->ee_tx_frm2xpa_enable[ee_mode] << 8) |
-			(ee->ee_tx_frm2xpa_enable[ee_mode]), AR5K_PHY(0x0d));
+			(ee->ee_tx_frm2xpa_enable[ee_mode]), AR5K_PHY_RF_CTL4);
 
-		AR5K_REG_MASKED_BITS(ah, AR5K_PHY(0x0a),
+		AR5K_REG_MASKED_BITS(ah, AR5K_PHY_RF_CTL3,
 			ee->ee_tx_end2xlna_enable[ee_mode] << 8, 0xffff00ff);
-		AR5K_REG_MASKED_BITS(ah, AR5K_PHY(0x19),
+		AR5K_REG_MASKED_BITS(ah, AR5K_PHY_NF,
 			(ee->ee_thr_62[ee_mode] << 12) & 0x7f000, 0xfff80fff);
-		AR5K_REG_MASKED_BITS(ah, AR5K_PHY(0x49), 4, 0xffffff01);
+		AR5K_REG_MASKED_BITS(ah, AR5K_PHY_OFDM_SELFCORR, 4, 0xffffff01);
 
 		AR5K_REG_ENABLE_BITS(ah, AR5K_PHY_IQ,
 		    AR5K_PHY_IQ_CORR_ENABLE |
@@ -1063,7 +1063,8 @@ int ath5k_hw_reset(struct ath5k_hw *ah, enum ieee80211_if_types op_mode,
 	ath5k_hw_reg_write(ah, AR5K_PHY_ACT_ENABLE, AR5K_PHY_ACT);
 
 	/*
-	 * 5111/5112 Specific
+	 * On 5211+ read activation -> rx delay
+	 * and use it.
 	 */
 	if (ah->ah_version != AR5K_AR5210) {
 		data = ath5k_hw_reg_read(ah, AR5K_PHY_RX_DELAY) &
@@ -1071,40 +1072,77 @@ int ath5k_hw_reset(struct ath5k_hw *ah, enum ieee80211_if_types op_mode,
 		data = (channel->hw_value & CHANNEL_CCK) ?
 			((data << 2) / 22) : (data / 10);
 
-		udelay(100 + data);
+		udelay(100 + (2 * data));
+		data = 0;
 	} else {
 		mdelay(1);
 	}
 
 	/*
-	 * Enable calibration and wait until completion
+	 * Perform ADC test (?)
+	 */
+	data = ath5k_hw_reg_read(ah, AR5K_PHY_TST1);
+	ath5k_hw_reg_write(ah, AR5K_PHY_TST1_TXHOLD, AR5K_PHY_TST1);
+	for (i = 0; i <= 20; i++) {
+		if (!(ath5k_hw_reg_read(ah, AR5K_PHY_ADC_TEST) & 0x10))
+			break;
+		udelay(200);
+	}
+	ath5k_hw_reg_write(ah, data, AR5K_PHY_TST1);
+	data = 0;
+
+	/*
+	 * Start automatic gain calibration
+	 *
+	 * During AGC calibration RX path is re-routed to
+	 * a signal detector so we don't receive anything.
+	 *
+	 * This method is used to calibrate some static offsets
+	 * used together with on-the fly I/Q calibration (the
+	 * one performed via ath5k_hw_phy_calibrate), that doesn't
+	 * interrupt rx path.
+	 *
+	 * If we are in a noisy environment AGC calibration may time
+	 * out.
 	 */
 	AR5K_REG_ENABLE_BITS(ah, AR5K_PHY_AGCCTL,
 				AR5K_PHY_AGCCTL_CAL);
 
+	/* At the same time start I/Q calibration for QAM constellation
+	 * -no need for CCK- */
+	ah->ah_calibration = false;
+	if (!(mode == AR5K_MODE_11B)) {
+		ah->ah_calibration = true;
+		AR5K_REG_WRITE_BITS(ah, AR5K_PHY_IQ,
+				AR5K_PHY_IQ_CAL_NUM_LOG_MAX, 15);
+		AR5K_REG_ENABLE_BITS(ah, AR5K_PHY_IQ,
+				AR5K_PHY_IQ_RUN);
+	}
+
+	/* Wait for gain calibration to finish (we check for I/Q calibration
+	 * during ath5k_phy_calibrate) */
 	if (ath5k_hw_register_timeout(ah, AR5K_PHY_AGCCTL,
 			AR5K_PHY_AGCCTL_CAL, 0, false)) {
-		ATH5K_ERR(ah->ah_sc, "calibration timeout (%uMHz)\n",
+		ATH5K_ERR(ah->ah_sc, "gain calibration timeout (%uMHz)\n",
 			channel->center_freq);
 		return -EAGAIN;
 	}
 
+	/*
+	 * Start noise floor calibration
+	 *
+	 * If we run NF calibration before AGC, it always times out.
+	 * Binary HAL starts NF and AGC calibration at the same time
+	 * and only waits for AGC to finish. I believe that's wrong because
+	 * during NF calibration, rx path is also routed to a detector, so if
+	 * it doesn't finish we won't have RX.
+	 *
+	 * XXX: Find an interval that's OK for all cards...
+	 */
 	ret = ath5k_hw_noise_floor_calibration(ah, channel->center_freq);
 	if (ret)
 		return ret;
 
-	ah->ah_calibration = false;
-
-	/* A and G modes can use QAM modulation which requires enabling
-	 * I and Q calibration. Don't bother in B mode. */
-	if (!(mode == AR5K_MODE_11B)) {
-		ah->ah_calibration = true;
-		AR5K_REG_WRITE_BITS(ah, AR5K_PHY_IQ,
-				AR5K_PHY_IQ_CAL_NUM_LOG_MAX, 15);
-		AR5K_REG_ENABLE_BITS(ah, AR5K_PHY_IQ,
-				AR5K_PHY_IQ_RUN);
-	}
-
 	/*
 	 * Reset queues and start beacon timers at the end of the reset routine
 	 */
@@ -1154,6 +1192,12 @@ int ath5k_hw_reset(struct ath5k_hw *ah, enum ieee80211_if_types op_mode,
 		ath5k_hw_reg_write(ah, AR5K_PHY_SCLOCK_32MHZ, AR5K_PHY_SCLOCK);
 		ath5k_hw_reg_write(ah, AR5K_PHY_SDELAY_32MHZ, AR5K_PHY_SDELAY);
 		ath5k_hw_reg_write(ah, ah->ah_phy_spending, AR5K_PHY_SPENDING);
+
+		data = ath5k_hw_reg_read(ah, AR5K_USEC_5211) & 0xffffc07f ;
+		data |= (ah->ah_phy_spending == AR5K_PHY_SPENDING_18) ?
+						0x00000f80 : 0x00001380 ;
+		ath5k_hw_reg_write(ah, data, AR5K_USEC_5211);
+		data = 0;
 	}
 
 	if (ah->ah_version == AR5K_AR5212) {
@@ -1226,7 +1270,7 @@ int ath5k_hw_set_power(struct ath5k_hw *ah, enum ath5k_power_mode mode,
 		bool set_chip, u16 sleep_duration)
 {
 	unsigned int i;
-	u32 staid;
+	u32 staid, data;
 
 	ATH5K_TRACE(ah->ah_sc);
 	staid = ath5k_hw_reg_read(ah, AR5K_STA_ID1);
@@ -1238,7 +1282,8 @@ int ath5k_hw_set_power(struct ath5k_hw *ah, enum ath5k_power_mode mode,
 	case AR5K_PM_NETWORK_SLEEP:
 		if (set_chip)
 			ath5k_hw_reg_write(ah,
-				AR5K_SLEEP_CTL_SLE | sleep_duration,
+				AR5K_SLEEP_CTL_SLE_ALLOW |
+				sleep_duration,
 				AR5K_SLEEP_CTL);
 
 		staid |= AR5K_STA_ID1_PWR_SV;
@@ -1253,13 +1298,24 @@ int ath5k_hw_set_power(struct ath5k_hw *ah, enum ath5k_power_mode mode,
 		break;
 
 	case AR5K_PM_AWAKE:
+
+		staid &= ~AR5K_STA_ID1_PWR_SV;
+
 		if (!set_chip)
 			goto commit;
 
-		ath5k_hw_reg_write(ah, AR5K_SLEEP_CTL_SLE_WAKE,
-				AR5K_SLEEP_CTL);
+		/* Preserve sleep duration */
+		data = ath5k_hw_reg_read(ah, AR5K_SLEEP_CTL);
+		if( data & 0xffc00000 ){
+			data = 0;
+		} else {
+			data = data & 0xfffcffff;
+		}
 
-		for (i = 5000; i > 0; i--) {
+		ath5k_hw_reg_write(ah, data, AR5K_SLEEP_CTL);
+		udelay(15);
+
+		for (i = 50; i > 0; i--) {
 			/* Check if the chip did wake up */
 			if ((ath5k_hw_reg_read(ah, AR5K_PCICFG) &
 					AR5K_PCICFG_SPWR_DN) == 0)
@@ -1267,15 +1323,13 @@ int ath5k_hw_set_power(struct ath5k_hw *ah, enum ath5k_power_mode mode,
 
 			/* Wait a bit and retry */
 			udelay(200);
-			ath5k_hw_reg_write(ah, AR5K_SLEEP_CTL_SLE_WAKE,
-				AR5K_SLEEP_CTL);
+			ath5k_hw_reg_write(ah, data, AR5K_SLEEP_CTL);
 		}
 
 		/* Fail if the chip didn't wake up */
 		if (i <= 0)
 			return -EIO;
 
-		staid &= ~AR5K_STA_ID1_PWR_SV;
 		break;
 
 	default:
@@ -1304,6 +1358,7 @@ void ath5k_hw_start_rx(struct ath5k_hw *ah)
 {
 	ATH5K_TRACE(ah->ah_sc);
 	ath5k_hw_reg_write(ah, AR5K_CR_RXE, AR5K_CR);
+	ath5k_hw_reg_read(ah, AR5K_CR);
 }
 
 /*
@@ -1390,6 +1445,7 @@ int ath5k_hw_tx_start(struct ath5k_hw *ah, unsigned int queue)
 		}
 		/* Start queue */
 		ath5k_hw_reg_write(ah, tx_queue, AR5K_CR);
+		ath5k_hw_reg_read(ah, AR5K_CR);
 	} else {
 		/* Return if queue is disabled */
 		if (AR5K_REG_READ_Q(ah, AR5K_QCU_TXD, queue))
@@ -1440,6 +1496,7 @@ int ath5k_hw_stop_tx_dma(struct ath5k_hw *ah, unsigned int queue)
 
 		/* Stop queue */
 		ath5k_hw_reg_write(ah, tx_queue, AR5K_CR);
+		ath5k_hw_reg_read(ah, AR5K_CR);
 	} else {
 		/*
 		 * Schedule TX disable and wait until queue is empty
@@ -1456,6 +1513,8 @@ int ath5k_hw_stop_tx_dma(struct ath5k_hw *ah, unsigned int queue)
 
 		/* Clear register */
 		ath5k_hw_reg_write(ah, 0, AR5K_QCU_TXD);
+		if (pending)
+			return -EBUSY;
 	}
 
 	/* TODO: Check for success else return error */
@@ -1684,6 +1743,7 @@ enum ath5k_int ath5k_hw_set_intr(struct ath5k_hw *ah, enum ath5k_int new_mask)
 	 * (they will be re-enabled afterwards).
 	 */
 	ath5k_hw_reg_write(ah, AR5K_IER_DISABLE, AR5K_IER);
+	ath5k_hw_reg_read(ah, AR5K_IER);
 
 	old_mask = ah->ah_imr;
 
@@ -1716,6 +1776,7 @@ enum ath5k_int ath5k_hw_set_intr(struct ath5k_hw *ah, enum ath5k_int new_mask)
 
 	/* ..re-enable interrupts */
 	ath5k_hw_reg_write(ah, AR5K_IER_ENABLE, AR5K_IER);
+	ath5k_hw_reg_read(ah, AR5K_IER);
 
 	return old_mask;
 }
@@ -3359,11 +3420,13 @@ int ath5k_hw_reset_tx_queue(struct ath5k_hw *ah, unsigned int queue)
 		ath5k_hw_reg_write(ah, ah->ah_turbo ?
 			AR5K_INIT_PROTO_TIME_CNTRL_TURBO :
 			AR5K_INIT_PROTO_TIME_CNTRL, AR5K_IFS1);
-		/* Set PHY register 0x9844 (??) */
+		/* Set AR5K_PHY_SETTLING */
 		ath5k_hw_reg_write(ah, ah->ah_turbo ?
-			(ath5k_hw_reg_read(ah, AR5K_PHY(17)) & ~0x7F) | 0x38 :
-			(ath5k_hw_reg_read(ah, AR5K_PHY(17)) & ~0x7F) | 0x1C,
-			AR5K_PHY(17));
+			(ath5k_hw_reg_read(ah, AR5K_PHY_SETTLING) & ~0x7F)
+			| 0x38 :
+			(ath5k_hw_reg_read(ah, AR5K_PHY_SETTLING) & ~0x7F)
+			| 0x1C,
+			AR5K_PHY_SETTLING);
 		/* Set Frame Control Register */
 		ath5k_hw_reg_write(ah, ah->ah_turbo ?
 			(AR5K_PHY_FRAME_CTL_INI | AR5K_PHY_TURBO_MODE |
@@ -3484,7 +3547,7 @@ int ath5k_hw_reset_tx_queue(struct ath5k_hw *ah, unsigned int queue)
 			if (tq->tqi_flags & AR5K_TXQ_FLAG_RDYTIME_EXP_POLICY_ENABLE)
 				AR5K_REG_ENABLE_BITS(ah,
 					AR5K_QUEUE_MISC(queue),
-					AR5K_QCU_MISC_TXE);
+					AR5K_QCU_MISC_RDY_VEOL_POLICY);
 		}
 
 		if (tq->tqi_flags & AR5K_TXQ_FLAG_BACKOFF_DISABLE)
diff --git a/drivers/net/wireless/ath5k/initvals.c b/drivers/net/wireless/ath5k/initvals.c
index 04c84e9da89d..2806b21bf90b 100644
--- a/drivers/net/wireless/ath5k/initvals.c
+++ b/drivers/net/wireless/ath5k/initvals.c
@@ -489,7 +489,7 @@ static const struct ath5k_ini ar5212_ini[] = {
 	{ AR5K_QUEUE_TXDP(9),	0x00000000 },
 	{ AR5K_DCU_FP,		0x00000000 },
 	{ AR5K_DCU_TXP,		0x00000000 },
-	{ AR5K_DCU_TX_FILTER,	0x00000000 },
+	{ AR5K_DCU_TX_FILTER_0_BASE,	0x00000000 },
 	/* Unknown table */
 	{ 0x1078, 0x00000000 },
 	{ 0x10b8, 0x00000000 },
@@ -679,7 +679,7 @@ static const struct ath5k_ini ar5212_ini[] = {
 	{ AR5K_PHY(645), 0x00106c10 },
 	{ AR5K_PHY(646), 0x009c4060 },
 	{ AR5K_PHY(647), 0x1483800a },
-	/* { AR5K_PHY(648), 0x018830c6 },*/ /* 2413 */
+	/* { AR5K_PHY(648), 0x018830c6 },*/ /* 2413/2425 */
 	{ AR5K_PHY(648), 0x01831061 },
 	{ AR5K_PHY(649), 0x00000400 },
 	/*{ AR5K_PHY(650), 0x000001b5 },*/
diff --git a/drivers/net/wireless/ath5k/phy.c b/drivers/net/wireless/ath5k/phy.c
index afd8689e5c03..fa0d47faf574 100644
--- a/drivers/net/wireless/ath5k/phy.c
+++ b/drivers/net/wireless/ath5k/phy.c
@@ -1020,6 +1020,74 @@ static const struct ath5k_ini_rfgain rfgain_2413[] = {
 	{ AR5K_RF_GAIN(63), { 0x000000f9 } },
 };
 
+/* Initial RF Gain settings for RF2425 */
+static const struct ath5k_ini_rfgain rfgain_2425[] = {
+	{ AR5K_RF_GAIN(0), { 0x00000000 } },
+	{ AR5K_RF_GAIN(1), { 0x00000040 } },
+	{ AR5K_RF_GAIN(2), { 0x00000080 } },
+	{ AR5K_RF_GAIN(3), { 0x00000181 } },
+	{ AR5K_RF_GAIN(4), { 0x000001c1 } },
+	{ AR5K_RF_GAIN(5), { 0x00000001 } },
+	{ AR5K_RF_GAIN(6), { 0x00000041 } },
+	{ AR5K_RF_GAIN(7), { 0x00000081 } },
+	{ AR5K_RF_GAIN(8), { 0x00000188 } },
+	{ AR5K_RF_GAIN(9), { 0x000001c8 } },
+	{ AR5K_RF_GAIN(10), { 0x00000008 } },
+	{ AR5K_RF_GAIN(11), { 0x00000048 } },
+	{ AR5K_RF_GAIN(12), { 0x00000088 } },
+	{ AR5K_RF_GAIN(13), { 0x00000189 } },
+	{ AR5K_RF_GAIN(14), { 0x000001c9 } },
+	{ AR5K_RF_GAIN(15), { 0x00000009 } },
+	{ AR5K_RF_GAIN(16), { 0x00000049 } },
+	{ AR5K_RF_GAIN(17), { 0x00000089 } },
+	{ AR5K_RF_GAIN(18), { 0x000001b0 } },
+	{ AR5K_RF_GAIN(19), { 0x000001f0 } },
+	{ AR5K_RF_GAIN(20), { 0x00000030 } },
+	{ AR5K_RF_GAIN(21), { 0x00000070 } },
+	{ AR5K_RF_GAIN(22), { 0x00000171 } },
+	{ AR5K_RF_GAIN(23), { 0x000001b1 } },
+	{ AR5K_RF_GAIN(24), { 0x000001f1 } },
+	{ AR5K_RF_GAIN(25), { 0x00000031 } },
+	{ AR5K_RF_GAIN(26), { 0x00000071 } },
+	{ AR5K_RF_GAIN(27), { 0x000001b8 } },
+	{ AR5K_RF_GAIN(28), { 0x000001f8 } },
+	{ AR5K_RF_GAIN(29), { 0x00000038 } },
+	{ AR5K_RF_GAIN(30), { 0x00000078 } },
+	{ AR5K_RF_GAIN(31), { 0x000000b8 } },
+	{ AR5K_RF_GAIN(32), { 0x000001b9 } },
+	{ AR5K_RF_GAIN(33), { 0x000001f9 } },
+	{ AR5K_RF_GAIN(34), { 0x00000039 } },
+	{ AR5K_RF_GAIN(35), { 0x00000079 } },
+	{ AR5K_RF_GAIN(36), { 0x000000b9 } },
+	{ AR5K_RF_GAIN(37), { 0x000000f9 } },
+	{ AR5K_RF_GAIN(38), { 0x000000f9 } },
+	{ AR5K_RF_GAIN(39), { 0x000000f9 } },
+	{ AR5K_RF_GAIN(40), { 0x000000f9 } },
+	{ AR5K_RF_GAIN(41), { 0x000000f9 } },
+	{ AR5K_RF_GAIN(42), { 0x000000f9 } },
+	{ AR5K_RF_GAIN(43), { 0x000000f9 } },
+	{ AR5K_RF_GAIN(44), { 0x000000f9 } },
+	{ AR5K_RF_GAIN(45), { 0x000000f9 } },
+	{ AR5K_RF_GAIN(46), { 0x000000f9 } },
+	{ AR5K_RF_GAIN(47), { 0x000000f9 } },
+	{ AR5K_RF_GAIN(48), { 0x000000f9 } },
+	{ AR5K_RF_GAIN(49), { 0x000000f9 } },
+	{ AR5K_RF_GAIN(50), { 0x000000f9 } },
+	{ AR5K_RF_GAIN(51), { 0x000000f9 } },
+	{ AR5K_RF_GAIN(52), { 0x000000f9 } },
+	{ AR5K_RF_GAIN(53), { 0x000000f9 } },
+	{ AR5K_RF_GAIN(54), { 0x000000f9 } },
+	{ AR5K_RF_GAIN(55), { 0x000000f9 } },
+	{ AR5K_RF_GAIN(56), { 0x000000f9 } },
+	{ AR5K_RF_GAIN(57), { 0x000000f9 } },
+	{ AR5K_RF_GAIN(58), { 0x000000f9 } },
+	{ AR5K_RF_GAIN(59), { 0x000000f9 } },
+	{ AR5K_RF_GAIN(60), { 0x000000f9 } },
+	{ AR5K_RF_GAIN(61), { 0x000000f9 } },
+	{ AR5K_RF_GAIN(62), { 0x000000f9 } },
+	{ AR5K_RF_GAIN(63), { 0x000000f9 } },
+};
+
 static const struct ath5k_gain_opt rfgain_opt_5112 = {
 	1,
 	8,
@@ -1588,8 +1656,8 @@ int ath5k_hw_rfgain(struct ath5k_hw *ah, unsigned int freq)
 		freq = 0; /* only 2Ghz */
 		break;
 	case AR5K_RF2425:
-		ath5k_rfg = rfgain_2413;
-		size = ARRAY_SIZE(rfgain_2413);
+		ath5k_rfg = rfgain_2425;
+		size = ARRAY_SIZE(rfgain_2425);
 		freq = 0; /* only 2Ghz */
 		break;
 	default:
@@ -1830,9 +1898,6 @@ static int ath5k_hw_rf5112_channel(struct ath5k_hw *ah,
 	data = data0 = data1 = data2 = 0;
 	c = channel->center_freq;
 
-	/*
-	 * Set the channel on the RF5112 or newer
-	 */
 	if (c < 4800) {
 		if (!((c - 2224) % 5)) {
 			data0 = ((2 * (c - 704)) - 3040) / 10;
@@ -1844,7 +1909,7 @@ static int ath5k_hw_rf5112_channel(struct ath5k_hw *ah,
 			return -EINVAL;
 
 		data0 = ath5k_hw_bitswap((data0 << 2) & 0xff, 8);
-	} else {
+	} else if ((c - (c % 5)) != 2 || c > 5435) {
 		if (!(c % 20) && c >= 5120) {
 			data0 = ath5k_hw_bitswap(((c - 4800) / 20 << 2), 8);
 			data2 = ath5k_hw_bitswap(3, 2);
@@ -1856,6 +1921,9 @@ static int ath5k_hw_rf5112_channel(struct ath5k_hw *ah,
 			data2 = ath5k_hw_bitswap(1, 2);
 		} else
 			return -EINVAL;
+	} else {
+		data0 = ath5k_hw_bitswap((10 * (c - 2) - 4800) / 25 + 1, 8);
+		data2 = ath5k_hw_bitswap(0, 2);
 	}
 
 	data = (data0 << 4) | (data1 << 1) | (data2 << 2) | 0x1001;
@@ -1867,6 +1935,45 @@ static int ath5k_hw_rf5112_channel(struct ath5k_hw *ah,
 }
 
 /*
+ * Set the channel on the RF2425
+ */
+static int ath5k_hw_rf2425_channel(struct ath5k_hw *ah,
+		struct ieee80211_channel *channel)
+{
+	u32 data, data0, data2;
+	u16 c;
+
+	data = data0 = data2 = 0;
+	c = channel->center_freq;
+
+	if (c < 4800) {
+		data0 = ath5k_hw_bitswap((c - 2272), 8);
+		data2 = 0;
+	/* ? 5GHz ? */
+	} else if ((c - (c % 5)) != 2 || c > 5435) {
+		if (!(c % 20) && c < 5120)
+			data0 = ath5k_hw_bitswap(((c - 4800) / 20 << 2), 8);
+		else if (!(c % 10))
+			data0 = ath5k_hw_bitswap(((c - 4800) / 10 << 1), 8);
+		else if (!(c % 5))
+			data0 = ath5k_hw_bitswap((c - 4800) / 5, 8);
+		else
+			return -EINVAL;
+		data2 = ath5k_hw_bitswap(1, 2);
+	} else {
+		data0 = ath5k_hw_bitswap((10 * (c - 2) - 4800) / 25 + 1, 8);
+		data2 = ath5k_hw_bitswap(0, 2);
+	}
+
+	data = (data0 << 4) | data2 << 2 | 0x1001;
+
+	ath5k_hw_reg_write(ah, data & 0xff, AR5K_RF_BUFFER);
+	ath5k_hw_reg_write(ah, (data >> 8) & 0x7f, AR5K_RF_BUFFER_CONTROL_5);
+
+	return 0;
+}
+
+/*
  * Set a channel on the radio chip
  */
 int ath5k_hw_channel(struct ath5k_hw *ah, struct ieee80211_channel *channel)
@@ -1895,6 +2002,9 @@ int ath5k_hw_channel(struct ath5k_hw *ah, struct ieee80211_channel *channel)
 	case AR5K_RF5111:
 		ret = ath5k_hw_rf5111_channel(ah, channel);
 		break;
+	case AR5K_RF2425:
+		ret = ath5k_hw_rf2425_channel(ah, channel);
+		break;
 	default:
 		ret = ath5k_hw_rf5112_channel(ah, channel);
 		break;
@@ -1903,6 +2013,15 @@ int ath5k_hw_channel(struct ath5k_hw *ah, struct ieee80211_channel *channel)
 	if (ret)
 		return ret;
 
+	/* Set JAPAN setting for channel 14 */
+	if (channel->center_freq == 2484) {
+		AR5K_REG_ENABLE_BITS(ah, AR5K_PHY_CCKTXCTL,
+				AR5K_PHY_CCKTXCTL_JAPAN);
+	} else {
+		AR5K_REG_ENABLE_BITS(ah, AR5K_PHY_CCKTXCTL,
+				AR5K_PHY_CCKTXCTL_WORLD);
+	}
+
 	ah->ah_current_channel.center_freq = channel->center_freq;
 	ah->ah_current_channel.hw_value = channel->hw_value;
 	ah->ah_turbo = channel->hw_value == CHANNEL_T ? true : false;
@@ -1933,6 +2052,8 @@ int ath5k_hw_channel(struct ath5k_hw *ah, struct ieee80211_channel *channel)
  * http://patft.uspto.gov/netacgi/nph-Parser?Sect1=PTO1&Sect2=HITOFF&d=PALL \
  * &p=1&u=%2Fnetahtml%2FPTO%2Fsrchnum.htm&r=1&f=G&l=50&s1=7245893.PN.&OS=PN/7
  *
+ * XXX: Since during noise floor calibration antennas are detached according to
+ * the patent, we should stop tx queues here.
  */
 int
 ath5k_hw_noise_floor_calibration(struct ath5k_hw *ah, short freq)
@@ -1942,7 +2063,7 @@ ath5k_hw_noise_floor_calibration(struct ath5k_hw *ah, short freq)
 	s32 noise_floor;
 
 	/*
-	 * Enable noise floor calibration and wait until completion
+	 * Enable noise floor calibration
 	 */
 	AR5K_REG_ENABLE_BITS(ah, AR5K_PHY_AGCCTL,
 				AR5K_PHY_AGCCTL_NF);
@@ -1952,7 +2073,7 @@ ath5k_hw_noise_floor_calibration(struct ath5k_hw *ah, short freq)
 	if (ret) {
 		ATH5K_ERR(ah->ah_sc,
 			"noise floor calibration timeout (%uMHz)\n", freq);
-		return ret;
+		return -EAGAIN;
 	}
 
 	/* Wait until the noise floor is calibrated and read the value */
@@ -1974,7 +2095,7 @@ ath5k_hw_noise_floor_calibration(struct ath5k_hw *ah, short freq)
 	if (noise_floor > AR5K_TUNE_NOISE_FLOOR) {
 		ATH5K_ERR(ah->ah_sc,
 			"noise floor calibration failed (%uMHz)\n", freq);
-		return -EIO;
+		return -EAGAIN;
 	}
 
 	ah->ah_noise_floor = noise_floor;
@@ -2087,38 +2208,66 @@ static int ath5k_hw_rf5110_calibrate(struct ath5k_hw *ah,
 }
 
 /*
- * Perform a PHY calibration on RF5111/5112
+ * Perform a PHY calibration on RF5111/5112 and newer chips
  */
 static int ath5k_hw_rf511x_calibrate(struct ath5k_hw *ah,
 		struct ieee80211_channel *channel)
 {
 	u32 i_pwr, q_pwr;
 	s32 iq_corr, i_coff, i_coffd, q_coff, q_coffd;
+	int i;
 	ATH5K_TRACE(ah->ah_sc);
 
 	if (!ah->ah_calibration ||
-			ath5k_hw_reg_read(ah, AR5K_PHY_IQ) & AR5K_PHY_IQ_RUN)
+		ath5k_hw_reg_read(ah, AR5K_PHY_IQ) & AR5K_PHY_IQ_RUN)
 		goto done;
 
-	ah->ah_calibration = false;
+	/* Calibration has finished, get the results and re-run */
+	for (i = 0; i <= 10; i++) {
+		iq_corr = ath5k_hw_reg_read(ah, AR5K_PHY_IQRES_CAL_CORR);
+		i_pwr = ath5k_hw_reg_read(ah, AR5K_PHY_IQRES_CAL_PWR_I);
+		q_pwr = ath5k_hw_reg_read(ah, AR5K_PHY_IQRES_CAL_PWR_Q);
+	}
 
-	iq_corr = ath5k_hw_reg_read(ah, AR5K_PHY_IQRES_CAL_CORR);
-	i_pwr = ath5k_hw_reg_read(ah, AR5K_PHY_IQRES_CAL_PWR_I);
-	q_pwr = ath5k_hw_reg_read(ah, AR5K_PHY_IQRES_CAL_PWR_Q);
 	i_coffd = ((i_pwr >> 1) + (q_pwr >> 1)) >> 7;
-	q_coffd = q_pwr >> 6;
+	q_coffd = q_pwr >> 7;
 
+	/* No correction */
 	if (i_coffd == 0 || q_coffd == 0)
 		goto done;
 
 	i_coff = ((-iq_corr) / i_coffd) & 0x3f;
-	q_coff = (((s32)i_pwr / q_coffd) - 64) & 0x1f;
 
-	/* Commit new IQ value */
+	/* Boundary check */
+	if (i_coff > 31)
+		i_coff = 31;
+	if (i_coff < -32)
+		i_coff = -32;
+
+	q_coff = (((s32)i_pwr / q_coffd) - 128) & 0x1f;
+
+	/* Boundary check */
+	if (q_coff > 15)
+		q_coff = 15;
+	if (q_coff < -16)
+		q_coff = -16;
+
+	/* Commit new I/Q value */
 	AR5K_REG_ENABLE_BITS(ah, AR5K_PHY_IQ, AR5K_PHY_IQ_CORR_ENABLE |
 		((u32)q_coff) | ((u32)i_coff << AR5K_PHY_IQ_CORR_Q_I_COFF_S));
 
+	/* Re-enable calibration -if we don't we'll commit
+	 * the same values again and again */
+	AR5K_REG_WRITE_BITS(ah, AR5K_PHY_IQ,
+			AR5K_PHY_IQ_CAL_NUM_LOG_MAX, 15);
+	AR5K_REG_ENABLE_BITS(ah, AR5K_PHY_IQ, AR5K_PHY_IQ_RUN);
+
 done:
+
+	/* TODO: Separate noise floor calibration from I/Q calibration
+	 * since noise floor calibration interrupts rx path while I/Q
+	 * calibration doesn't. We don't need to run noise floor calibration
+	 * as often as I/Q calibration.*/
 	ath5k_hw_noise_floor_calibration(ah, channel->center_freq);
 
 	/* Request RF gain */
diff --git a/drivers/net/wireless/ath5k/reg.h b/drivers/net/wireless/ath5k/reg.h
index 30629b3e37c2..7562bf173d3e 100644
--- a/drivers/net/wireless/ath5k/reg.h
+++ b/drivers/net/wireless/ath5k/reg.h
@@ -53,7 +53,7 @@
 #define AR5K_CR_TXD0	0x00000008	/* TX Disable for queue 0 on 5210 */
 #define AR5K_CR_TXD1	0x00000010	/* TX Disable for queue 1 on 5210 */
 #define	AR5K_CR_RXD	0x00000020	/* RX Disable */
-#define	AR5K_CR_SWI	0x00000040
+#define	AR5K_CR_SWI	0x00000040	/* Software Interrupt */
 
 /*
  * RX Descriptor Pointer register
@@ -65,19 +65,19 @@
  */
 #define	AR5K_CFG		0x0014			/* Register Address */
 #define	AR5K_CFG_SWTD		0x00000001	/* Byte-swap TX descriptor (for big endian archs) */
-#define	AR5K_CFG_SWTB		0x00000002	/* Byte-swap TX buffer (?) */
+#define	AR5K_CFG_SWTB		0x00000002	/* Byte-swap TX buffer */
 #define	AR5K_CFG_SWRD		0x00000004	/* Byte-swap RX descriptor */
-#define	AR5K_CFG_SWRB		0x00000008	/* Byte-swap RX buffer (?) */
-#define	AR5K_CFG_SWRG		0x00000010	/* Byte-swap Register values (?) */
-#define AR5K_CFG_ADHOC		0x00000020 	/* [5211+] */
+#define	AR5K_CFG_SWRB		0x00000008	/* Byte-swap RX buffer */
+#define	AR5K_CFG_SWRG		0x00000010	/* Byte-swap Register access */
+#define AR5K_CFG_ADHOC		0x00000020 	/* AP/Adhoc indication [5211+] */
 #define AR5K_CFG_PHY_OK		0x00000100	/* [5211+] */
 #define AR5K_CFG_EEBS		0x00000200	/* EEPROM is busy */
-#define	AR5K_CFG_CLKGD		0x00000400	/* Clock gated (?) */
+#define	AR5K_CFG_CLKGD		0x00000400	/* Clock gated (Disable dynamic clock) */
 #define AR5K_CFG_TXCNT		0x00007800	/* Tx frame count (?) [5210] */
 #define AR5K_CFG_TXCNT_S	11
 #define AR5K_CFG_TXFSTAT	0x00008000	/* Tx frame status (?) [5210] */
 #define AR5K_CFG_TXFSTRT	0x00010000	/* [5210] */
-#define	AR5K_CFG_PCI_THRES	0x00060000	/* [5211+] */
+#define	AR5K_CFG_PCI_THRES	0x00060000	/* PCI Master req q threshold [5211+] */
 #define	AR5K_CFG_PCI_THRES_S	17
 
 /*
@@ -162,35 +162,40 @@
 /*
  * Transmit configuration register
  */
-#define AR5K_TXCFG		0x0030			/* Register Address */
-#define AR5K_TXCFG_SDMAMR	0x00000007	/* DMA size */
-#define AR5K_TXCFG_SDMAMR_S	0
-#define AR5K_TXCFG_B_MODE	0x00000008	/* Set b mode for 5111 (enable 2111) */
-#define AR5K_TXCFG_TXFSTP	0x00000008	/* TX DMA full Stop [5210] */
-#define AR5K_TXCFG_TXFULL	0x000003f0	/* TX Triger level mask */
-#define AR5K_TXCFG_TXFULL_S	4
-#define AR5K_TXCFG_TXFULL_0B	0x00000000
-#define AR5K_TXCFG_TXFULL_64B	0x00000010
-#define AR5K_TXCFG_TXFULL_128B	0x00000020
-#define AR5K_TXCFG_TXFULL_192B	0x00000030
-#define AR5K_TXCFG_TXFULL_256B	0x00000040
-#define AR5K_TXCFG_TXCONT_EN	0x00000080
-#define AR5K_TXCFG_DMASIZE	0x00000100	/* Flag for passing DMA size [5210] */
-#define AR5K_TXCFG_JUMBO_TXE	0x00000400	/* Enable jumbo frames transmition (?) [5211+] */
-#define AR5K_TXCFG_RTSRND	0x00001000	/* [5211+] */
-#define AR5K_TXCFG_FRMPAD_DIS	0x00002000	/* [5211+] */
-#define AR5K_TXCFG_RDY_DIS	0x00004000	/* [5211+] */
+#define AR5K_TXCFG			0x0030			/* Register Address */
+#define AR5K_TXCFG_SDMAMR		0x00000007	/* DMA size (read) */
+#define AR5K_TXCFG_SDMAMR_S		0
+#define AR5K_TXCFG_B_MODE		0x00000008	/* Set b mode for 5111 (enable 2111) */
+#define AR5K_TXCFG_TXFSTP		0x00000008	/* TX DMA full Stop [5210] */
+#define AR5K_TXCFG_TXFULL		0x000003f0	/* TX Triger level mask */
+#define AR5K_TXCFG_TXFULL_S		4
+#define AR5K_TXCFG_TXFULL_0B		0x00000000
+#define AR5K_TXCFG_TXFULL_64B		0x00000010
+#define AR5K_TXCFG_TXFULL_128B		0x00000020
+#define AR5K_TXCFG_TXFULL_192B		0x00000030
+#define AR5K_TXCFG_TXFULL_256B		0x00000040
+#define AR5K_TXCFG_TXCONT_EN		0x00000080
+#define AR5K_TXCFG_DMASIZE		0x00000100	/* Flag for passing DMA size [5210] */
+#define AR5K_TXCFG_JUMBO_DESC_EN	0x00000400	/* Enable jumbo tx descriptors [5211+] */
+#define AR5K_TXCFG_ADHOC_BCN_ATIM	0x00000800	/* Adhoc Beacon ATIM Policy */
+#define AR5K_TXCFG_ATIM_WINDOW_DEF_DIS	0x00001000	/* Disable ATIM window defer [5211+] */
+#define AR5K_TXCFG_RTSRND		0x00001000	/* [5211+] */
+#define AR5K_TXCFG_FRMPAD_DIS		0x00002000	/* [5211+] */
+#define AR5K_TXCFG_RDY_CBR_DIS		0x00004000	/* Ready time CBR disable [5211+] */
+#define AR5K_TXCFG_JUMBO_FRM_MODE	0x00008000	/* Jumbo frame mode [5211+] */
+#define AR5K_TXCFG_DCU_CACHING_DIS	0x00010000	/* Disable DCU caching */
 
 /*
  * Receive configuration register
  */
 #define AR5K_RXCFG		0x0034			/* Register Address */
-#define AR5K_RXCFG_SDMAMW	0x00000007	/* DMA size */
+#define AR5K_RXCFG_SDMAMW	0x00000007	/* DMA size (write) */
 #define AR5K_RXCFG_SDMAMW_S	0
-#define	AR5K_RXCFG_DEF_ANTENNA	0x00000008	/* Default antenna */
-#define AR5K_RXCFG_ZLFDMA	0x00000010	/* Zero-length DMA */
-#define AR5K_RXCFG_JUMBO_RXE	0x00000020	/* Enable jumbo frames reception (?) [5211+] */
-#define AR5K_RXCFG_JUMBO_WRAP	0x00000040	/* Wrap jumbo frames (?) [5211+] */
+#define AR5K_RXCFG_ZLFDMA	0x00000008	/* Enable Zero-length frame DMA */
+#define	AR5K_RXCFG_DEF_ANTENNA	0x00000010	/* Default antenna (?) */
+#define AR5K_RXCFG_JUMBO_RXE	0x00000020	/* Enable jumbo rx descriptors [5211+] */
+#define AR5K_RXCFG_JUMBO_WRAP	0x00000040	/* Wrap jumbo frames [5211+] */
+#define AR5K_RXCFG_SLE_ENTRY	0x00000080	/* Sleep entry policy */
 
 /*
  * Receive jumbo descriptor last address register
@@ -202,35 +207,35 @@
  * MIB control register
  */
 #define AR5K_MIBC		0x0040			/* Register Address */
-#define AR5K_MIBC_COW		0x00000001
-#define AR5K_MIBC_FMC		0x00000002	/* Freeze Mib Counters (?) */
-#define AR5K_MIBC_CMC		0x00000004	/* Clean Mib Counters (?) */
-#define AR5K_MIBC_MCS		0x00000008
+#define AR5K_MIBC_COW		0x00000001	/* Warn test indicator */
+#define AR5K_MIBC_FMC		0x00000002	/* Freeze MIB Counters  */
+#define AR5K_MIBC_CMC		0x00000004	/* Clean MIB Counters  */
+#define AR5K_MIBC_MCS		0x00000008	/* MIB counter strobe */
 
 /*
  * Timeout prescale register
  */
 #define AR5K_TOPS		0x0044
-#define	AR5K_TOPS_M		0x0000ffff	/* [5211+] (?) */
+#define	AR5K_TOPS_M		0x0000ffff
 
 /*
  * Receive timeout register (no frame received)
  */
 #define AR5K_RXNOFRM		0x0048
-#define	AR5K_RXNOFRM_M		0x000003ff	/* [5211+] (?) */
+#define	AR5K_RXNOFRM_M		0x000003ff
 
 /*
  * Transmit timeout register (no frame sent)
  */
 #define AR5K_TXNOFRM		0x004c
-#define	AR5K_TXNOFRM_M		0x000003ff	/* [5211+] (?) */
-#define	AR5K_TXNOFRM_QCU	0x000ffc00	/* [5211+] (?) */
+#define	AR5K_TXNOFRM_M		0x000003ff
+#define	AR5K_TXNOFRM_QCU	0x000ffc00
 
 /*
  * Receive frame gap timeout register
  */
 #define AR5K_RPGTO		0x0050
-#define AR5K_RPGTO_M		0x000003ff	/* [5211+] (?) */
+#define AR5K_RPGTO_M		0x000003ff
 
 /*
  * Receive frame count limit register
@@ -241,6 +246,7 @@
 
 /*
  * Misc settings register
+ * (reserved0-3)
  */
 #define AR5K_MISC		0x0058			/* Register Address */
 #define	AR5K_MISC_DMA_OBS_M	0x000001e0
@@ -256,6 +262,7 @@
 
 /*
  * QCU/DCU clock gating register (5311)
+ * (reserved4-5)
  */
 #define	AR5K_QCUDCU_CLKGT	0x005c			/* Register Address (?) */
 #define	AR5K_QCUDCU_CLKGT_QCU	0x0000ffff	/* Mask for QCU clock */
@@ -284,18 +291,18 @@
 #define AR5K_ISR_TXEOL		0x00000400	/* Empty TX descriptor */
 #define AR5K_ISR_TXURN		0x00000800	/* Transmit FIFO underrun */
 #define AR5K_ISR_MIB		0x00001000	/* Update MIB counters */
-#define AR5K_ISR_SWI		0x00002000	/* Software interrupt (?) */
+#define AR5K_ISR_SWI		0x00002000	/* Software interrupt */
 #define AR5K_ISR_RXPHY		0x00004000	/* PHY error */
-#define AR5K_ISR_RXKCM		0x00008000
+#define AR5K_ISR_RXKCM		0x00008000	/* RX Key cache miss */
 #define AR5K_ISR_SWBA		0x00010000	/* Software beacon alert */
 #define AR5K_ISR_BRSSI		0x00020000
 #define AR5K_ISR_BMISS		0x00040000	/* Beacon missed */
 #define AR5K_ISR_HIUERR		0x00080000	/* Host Interface Unit error [5211+] */
 #define AR5K_ISR_BNR		0x00100000 	/* Beacon not ready [5211+] */
-#define AR5K_ISR_MCABT		0x00100000	/* [5210] */
-#define AR5K_ISR_RXCHIRP	0x00200000	/* [5212+] */
-#define AR5K_ISR_SSERR		0x00200000	/* [5210] */
-#define AR5K_ISR_DPERR		0x00400000	/* [5210] */
+#define AR5K_ISR_MCABT		0x00100000	/* Master Cycle Abort [5210] */
+#define AR5K_ISR_RXCHIRP	0x00200000	/* CHIRP Received [5212+] */
+#define AR5K_ISR_SSERR		0x00200000	/* Signaled System Error [5210] */
+#define AR5K_ISR_DPERR		0x00400000	/* Det par Error (?) [5210] */
 #define AR5K_ISR_TIM		0x00800000	/* [5210] */
 #define AR5K_ISR_BCNMISC	0x00800000	/* [5212+] */
 #define AR5K_ISR_GPIO		0x01000000	/* GPIO (rf kill)*/
@@ -320,14 +327,14 @@
 
 #define AR5K_SISR2		0x008c			/* Register Address [5211+] */
 #define AR5K_SISR2_QCU_TXURN	0x000003ff	/* Mask for QCU_TXURN */
-#define	AR5K_SISR2_MCABT	0x00100000
-#define	AR5K_SISR2_SSERR	0x00200000
-#define	AR5K_SISR2_DPERR	0x00400000
+#define	AR5K_SISR2_MCABT	0x00100000	/* Master Cycle Abort */
+#define	AR5K_SISR2_SSERR	0x00200000	/* Signaled System Error */
+#define	AR5K_SISR2_DPERR	0x00400000	/* Det par Error (?) */
 #define	AR5K_SISR2_TIM		0x01000000	/* [5212+] */
 #define	AR5K_SISR2_CAB_END	0x02000000	/* [5212+] */
-#define	AR5K_SISR2_DTIM_SYNC	0x04000000	/* [5212+] */
-#define	AR5K_SISR2_BCN_TIMEOUT	0x08000000	/* [5212+] */
-#define	AR5K_SISR2_CAB_TIMEOUT	0x10000000	/* [5212+] */
+#define	AR5K_SISR2_DTIM_SYNC	0x04000000	/* DTIM sync lost [5212+] */
+#define	AR5K_SISR2_BCN_TIMEOUT	0x08000000	/* Beacon Timeout [5212+] */
+#define	AR5K_SISR2_CAB_TIMEOUT	0x10000000	/* CAB Timeout [5212+] */
 #define	AR5K_SISR2_DTIM		0x20000000	/* [5212+] */
 
 #define AR5K_SISR3		0x0090			/* Register Address [5211+] */
@@ -368,18 +375,18 @@
 #define AR5K_IMR_TXEOL		0x00000400	/* Empty TX descriptor*/
 #define AR5K_IMR_TXURN		0x00000800	/* Transmit FIFO underrun*/
 #define AR5K_IMR_MIB		0x00001000	/* Update MIB counters*/
-#define AR5K_IMR_SWI		0x00002000
+#define AR5K_IMR_SWI		0x00002000	/* Software interrupt */
 #define AR5K_IMR_RXPHY		0x00004000	/* PHY error*/
-#define AR5K_IMR_RXKCM		0x00008000
+#define AR5K_IMR_RXKCM		0x00008000	/* RX Key cache miss */
 #define AR5K_IMR_SWBA		0x00010000	/* Software beacon alert*/
 #define AR5K_IMR_BRSSI		0x00020000
 #define AR5K_IMR_BMISS		0x00040000	/* Beacon missed*/
 #define AR5K_IMR_HIUERR		0x00080000	/* Host Interface Unit error [5211+] */
 #define AR5K_IMR_BNR		0x00100000 	/* Beacon not ready [5211+] */
-#define AR5K_IMR_MCABT		0x00100000	/* [5210] */
-#define AR5K_IMR_RXCHIRP	0x00200000	/* [5212+]*/
-#define AR5K_IMR_SSERR		0x00200000	/* [5210] */
-#define AR5K_IMR_DPERR		0x00400000	/* [5210] */
+#define AR5K_IMR_MCABT		0x00100000	/* Master Cycle Abort [5210] */
+#define AR5K_IMR_RXCHIRP	0x00200000	/* CHIRP Received [5212+]*/
+#define AR5K_IMR_SSERR		0x00200000	/* Signaled System Error [5210] */
+#define AR5K_IMR_DPERR		0x00400000	/* Det par Error (?) [5210] */
 #define AR5K_IMR_TIM		0x00800000	/* [5211+] */
 #define AR5K_IMR_BCNMISC	0x00800000	/* [5212+] */
 #define AR5K_IMR_GPIO		0x01000000	/* GPIO (rf kill)*/
@@ -405,14 +412,14 @@
 #define AR5K_SIMR2		0x00ac			/* Register Address [5211+] */
 #define AR5K_SIMR2_QCU_TXURN	0x000003ff	/* Mask for QCU_TXURN */
 #define AR5K_SIMR2_QCU_TXURN_S	0
-#define	AR5K_SIMR2_MCABT	0x00100000
-#define	AR5K_SIMR2_SSERR	0x00200000
-#define	AR5K_SIMR2_DPERR	0x00400000
+#define	AR5K_SIMR2_MCABT	0x00100000	/* Master Cycle Abort */
+#define	AR5K_SIMR2_SSERR	0x00200000	/* Signaled System Error */
+#define	AR5K_SIMR2_DPERR	0x00400000	/* Det par Error (?) */
 #define	AR5K_SIMR2_TIM		0x01000000	/* [5212+] */
 #define	AR5K_SIMR2_CAB_END	0x02000000	/* [5212+] */
-#define	AR5K_SIMR2_DTIM_SYNC	0x04000000	/* [5212+] */
-#define	AR5K_SIMR2_BCN_TIMEOUT	0x08000000	/* [5212+] */
-#define	AR5K_SIMR2_CAB_TIMEOUT	0x10000000	/* [5212+] */
+#define	AR5K_SIMR2_DTIM_SYNC	0x04000000	/* DTIM Sync lost [5212+] */
+#define	AR5K_SIMR2_BCN_TIMEOUT	0x08000000	/* Beacon Timeout [5212+] */
+#define	AR5K_SIMR2_CAB_TIMEOUT	0x10000000	/* CAB Timeout [5212+] */
 #define	AR5K_SIMR2_DTIM		0x20000000	/* [5212+] */
 
 #define AR5K_SIMR3		0x00b0			/* Register Address [5211+] */
@@ -425,23 +432,69 @@
 #define AR5K_SIMR4_QTRIG	0x000003ff	/* Mask for QTRIG */
 #define AR5K_SIMR4_QTRIG_S	0
 
+/*
+ * DMA Debug registers 0-7
+ * 0xe0 - 0xfc
+ */
 
 /*
  * Decompression mask registers [5212+]
  */
-#define AR5K_DCM_ADDR		0x0400		/*Decompression mask address (?)*/
-#define AR5K_DCM_DATA		0x0404		/*Decompression mask data (?)*/
+#define AR5K_DCM_ADDR		0x0400		/*Decompression mask address (index) */
+#define AR5K_DCM_DATA		0x0404		/*Decompression mask data */
+
+/*
+ * Wake On Wireless pattern control register [5212+]
+ */
+#define	AR5K_WOW_PCFG			0x0410			/* Register Address */
+#define	AR5K_WOW_PCFG_PAT_MATCH_EN	0x00000001	/* Pattern match enable */
+#define	AR5K_WOW_PCFG_LONG_FRAME_POL	0x00000002	/* Long frame policy */
+#define	AR5K_WOW_PCFG_WOBMISS		0x00000004	/* Wake on bea(con) miss (?) */
+#define	AR5K_WOW_PCFG_PAT_0_EN		0x00000100	/* Enable pattern 0 */
+#define	AR5K_WOW_PCFG_PAT_1_EN		0x00000200	/* Enable pattern 1 */
+#define	AR5K_WOW_PCFG_PAT_2_EN		0x00000400	/* Enable pattern 2 */
+#define	AR5K_WOW_PCFG_PAT_3_EN		0x00000800	/* Enable pattern 3 */
+#define	AR5K_WOW_PCFG_PAT_4_EN		0x00001000	/* Enable pattern 4 */
+#define	AR5K_WOW_PCFG_PAT_5_EN		0x00002000	/* Enable pattern 5 */
+
+/*
+ * Wake On Wireless pattern index register (?) [5212+]
+ */
+#define	AR5K_WOW_PAT_IDX	0x0414
+
+/*
+ * Wake On Wireless pattern data register [5212+]
+ */
+#define	AR5K_WOW_PAT_DATA	0x0418			/* Register Address */
+#define	AR5K_WOW_PAT_DATA_0_3_V	0x00000001	/* Pattern 0, 3 value */
+#define	AR5K_WOW_PAT_DATA_1_4_V	0x00000100	/* Pattern 1, 4 value */
+#define	AR5K_WOW_PAT_DATA_2_5_V	0x00010000	/* Pattern 2, 5 value */
+#define	AR5K_WOW_PAT_DATA_0_3_M	0x01000000	/* Pattern 0, 3 mask */
+#define	AR5K_WOW_PAT_DATA_1_4_M	0x04000000	/* Pattern 1, 4 mask */
+#define	AR5K_WOW_PAT_DATA_2_5_M	0x10000000	/* Pattern 2, 5 mask */
 
 /*
  * Decompression configuration registers [5212+]
  */
-#define AR5K_DCCFG		0x0420
+#define AR5K_DCCFG		0x0420			/* Register Address */
+#define AR5K_DCCFG_GLOBAL_EN	0x00000001	/* Enable decompression on all queues */
+#define AR5K_DCCFG_BYPASS_EN	0x00000002	/* Bypass decompression */
+#define AR5K_DCCFG_BCAST_EN	0x00000004	/* Enable decompression for bcast frames */
+#define AR5K_DCCFG_MCAST_EN	0x00000008	/* Enable decompression for mcast frames */
 
 /*
  * Compression configuration registers [5212+]
  */
-#define AR5K_CCFG		0x0600
-#define AR5K_CCFG_CUP		0x0604
+#define AR5K_CCFG		0x0600			/* Register Address */
+#define	AR5K_CCFG_WINDOW_SIZE	0x00000007	/* Compression window size */
+#define	AR5K_CCFG_CPC_EN	0x00000008	/* Enable performance counters */
+
+#define AR5K_CCFG_CCU		0x0604			/* Register Address */
+#define AR5K_CCFG_CCU_CUP_EN	0x00000001	/* CCU Catchup enable */
+#define AR5K_CCFG_CCU_CREDIT	0x00000002	/* CCU Credit (field) */
+#define AR5K_CCFG_CCU_CD_THRES	0x00000080	/* CCU Cyc(lic?) debt threshold (field) */
+#define AR5K_CCFG_CCU_CUP_LCNT	0x00010000	/* CCU Catchup lit(?) count */
+#define	AR5K_CCFG_CCU_INIT	0x00100200	/* Initial value during reset */
 
 /*
  * Compression performance counter registers [5212+]
@@ -450,7 +503,7 @@
 #define AR5K_CPC1		0x0614		/* Compression performance counter 1*/
 #define AR5K_CPC2		0x0618		/* Compression performance counter 2 */
 #define AR5K_CPC3		0x061c		/* Compression performance counter 3 */
-#define AR5K_CPCORN		0x0620		/* Compression performance overrun (?) */
+#define AR5K_CPCOVF		0x0620		/* Compression performance overflow */
 
 
 /*
@@ -466,8 +519,6 @@
  * set/clear, which contain status for all queues (we shift by 1 for each
  * queue). To access these registers easily we define some macros here
  * that are used inside HAL. For more infos check out *_tx_queue functs.
- *
- * TODO: Boundary checking on macros (here?)
  */
 
 /*
@@ -513,7 +564,6 @@
 #define	AR5K_QCU_RDYTIMECFG_BASE	0x0900	/* Register Address - Queue0 RDYTIMECFG */
 #define	AR5K_QCU_RDYTIMECFG_INTVAL	0x00ffffff	/* Ready time interval mask */
 #define AR5K_QCU_RDYTIMECFG_INTVAL_S	0
-#define	AR5K_QCU_RDYTIMECFG_DURATION	0x00ffffff	/* Ready time duration mask */
 #define	AR5K_QCU_RDYTIMECFG_ENABLE	0x01000000	/* Ready time enable mask */
 #define AR5K_QUEUE_RDYTIMECFG(_q)	AR5K_QUEUE_REG(AR5K_QCU_RDYTIMECFG_BASE, _q)
 
@@ -534,19 +584,20 @@
  */
 #define AR5K_QCU_MISC_BASE		0x09c0			/* Register Address -Queue0 MISC */
 #define	AR5K_QCU_MISC_FRSHED_M		0x0000000f	/* Frame sheduling mask */
-#define	AR5K_QCU_MISC_FRSHED_ASAP	0		/* ASAP */
-#define	AR5K_QCU_MISC_FRSHED_CBR	1		/* Constant Bit Rate */
-#define	AR5K_QCU_MISC_FRSHED_DBA_GT	2		/* DMA Beacon alert gated (?) */
-#define	AR5K_QCU_MISC_FRSHED_TIM_GT	3		/* Time gated (?) */
+#define	AR5K_QCU_MISC_FRSHED_ASAP		0	/* ASAP */
+#define	AR5K_QCU_MISC_FRSHED_CBR		1	/* Constant Bit Rate */
+#define	AR5K_QCU_MISC_FRSHED_DBA_GT		2	/* DMA Beacon alert gated (?) */
+#define	AR5K_QCU_MISC_FRSHED_TIM_GT		3	/* Time gated (?) */
 #define	AR5K_QCU_MISC_FRSHED_BCN_SENT_GT	4	/* Beacon sent gated (?) */
 #define	AR5K_QCU_MISC_ONESHOT_ENABLE	0x00000010	/* Oneshot enable */
 #define	AR5K_QCU_MISC_CBREXP		0x00000020	/* CBR expired (normal queue) */
 #define	AR5K_QCU_MISC_CBREXP_BCN	0x00000040	/* CBR expired (beacon queue) */
-#define	AR5K_QCU_MISC_BCN_ENABLE	0x00000080	/* Beacons enabled */
-#define	AR5K_QCU_MISC_CBR_THRES_ENABLE	0x00000100	/* CBR threshold enabled (?) */
-#define	AR5K_QCU_MISC_TXE		0x00000200	/* TXE reset when RDYTIME enalbed (?) */
-#define	AR5K_QCU_MISC_CBR		0x00000400	/* CBR threshold reset (?) */
-#define	AR5K_QCU_MISC_DCU_EARLY		0x00000800	/* DCU reset (?) */
+#define	AR5K_QCU_MISC_BCN_ENABLE	0x00000080	/* Enable Beacon use */
+#define	AR5K_QCU_MISC_CBR_THRES_ENABLE	0x00000100	/* CBR threshold enabled */
+#define	AR5K_QCU_MISC_RDY_VEOL_POLICY	0x00000200	/* TXE reset when RDYTIME enalbed */
+#define	AR5K_QCU_MISC_CBR_RESET_CNT	0x00000400	/* CBR threshold (counter) reset */
+#define	AR5K_QCU_MISC_DCU_EARLY		0x00000800	/* DCU early termination */
+#define AR5K_QCU_MISC_DCU_CMP_EN	0x00001000	/* Enable frame compression */
 #define AR5K_QUEUE_MISC(_q)		AR5K_QUEUE_REG(AR5K_QCU_MISC_BASE, _q)
 
 
@@ -555,7 +606,7 @@
  */
 #define AR5K_QCU_STS_BASE	0x0a00			/* Register Address - Queue0 STS */
 #define	AR5K_QCU_STS_FRMPENDCNT	0x00000003	/* Frames pending counter */
-#define	AR5K_QCU_STS_CBREXPCNT	0x0000ff00	/* CBR expired counter (?) */
+#define	AR5K_QCU_STS_CBREXPCNT	0x0000ff00	/* CBR expired counter */
 #define	AR5K_QUEUE_STATUS(_q)	AR5K_QUEUE_REG(AR5K_QCU_STS_BASE, _q)
 
 /*
@@ -569,9 +620,11 @@
  */
 #define AR5K_QCU_CBB_SELECT	0x0b00
 #define AR5K_QCU_CBB_ADDR	0x0b04
+#define AR5K_QCU_CBB_ADDR_S	9
 
 /*
  * QCU compression buffer configuration register [5212+]
+ * (buffer size)
  */
 #define AR5K_QCU_CBCFG		0x0b08
 
@@ -652,80 +705,100 @@
  * No lockout means there is no special handling.
  */
 #define AR5K_DCU_MISC_BASE		0x1100			/* Register Address -Queue0 DCU_MISC */
-#define	AR5K_DCU_MISC_BACKOFF		0x000007ff	/* Mask for backoff setting (?) */
+#define	AR5K_DCU_MISC_BACKOFF		0x000007ff	/* Mask for backoff threshold */
 #define AR5K_DCU_MISC_BACKOFF_FRAG	0x00000200	/* Enable backoff while bursting */
-#define	AR5K_DCU_MISC_HCFPOLL_ENABLE	0x00000800	/* CF - Poll (?) */
-#define	AR5K_DCU_MISC_BACKOFF_PERSIST	0x00001000	/* Persistent backoff (?) */
-#define	AR5K_DCU_MISC_FRMPRFTCH_ENABLE	0x00002000	/* Enable frame pre-fetch (?) */
+#define	AR5K_DCU_MISC_HCFPOLL_ENABLE	0x00000800	/* CF - Poll enable */
+#define	AR5K_DCU_MISC_BACKOFF_PERSIST	0x00001000	/* Persistent backoff */
+#define	AR5K_DCU_MISC_FRMPRFTCH_ENABLE	0x00002000	/* Enable frame pre-fetch */
 #define	AR5K_DCU_MISC_VIRTCOL		0x0000c000	/* Mask for Virtual Collision (?) */
-#define	AR5K_DCU_MISC_VIRTCOL_NORMAL	0
-#define	AR5K_DCU_MISC_VIRTCOL_MODIFIED	1
-#define	AR5K_DCU_MISC_VIRTCOL_IGNORE	2
-#define	AR5K_DCU_MISC_BCN_ENABLE	0x00010000	/* Beacon enable (?) */
+#define	AR5K_DCU_MISC_VIRTCOL_NORMAL		0
+#define	AR5K_DCU_MISC_VIRTCOL_MODIFIED		1
+#define	AR5K_DCU_MISC_VIRTCOL_IGNORE		2
+#define	AR5K_DCU_MISC_BCN_ENABLE	0x00010000	/* Enable Beacon use */
 #define	AR5K_DCU_MISC_ARBLOCK_CTL	0x00060000	/* Arbiter lockout control mask */
 #define	AR5K_DCU_MISC_ARBLOCK_CTL_S	17
-#define	AR5K_DCU_MISC_ARBLOCK_CTL_NONE	0		/* No arbiter lockout */
+#define	AR5K_DCU_MISC_ARBLOCK_CTL_NONE		0	/* No arbiter lockout */
 #define	AR5K_DCU_MISC_ARBLOCK_CTL_INTFRM	1	/* Intra-frame lockout */
 #define	AR5K_DCU_MISC_ARBLOCK_CTL_GLOBAL	2	/* Global lockout */
-#define	AR5K_DCU_MISC_ARBLOCK_IGNORE	0x00080000
-#define	AR5K_DCU_MISC_SEQ_NUM_INCR_DIS	0x00100000	/* Disable sequence number increment (?) */
-#define	AR5K_DCU_MISC_POST_FR_BKOFF_DIS	0x00200000	/* Disable post-frame backoff (?) */
-#define	AR5K_DCU_MISC_VIRT_COLL_POLICY	0x00400000	/* Virtual Collision policy (?) */
-#define	AR5K_DCU_MISC_BLOWN_IFS_POLICY	0x00800000
+#define	AR5K_DCU_MISC_ARBLOCK_IGNORE	0x00080000	/* Ignore Arbiter lockout */
+#define	AR5K_DCU_MISC_SEQ_NUM_INCR_DIS	0x00100000	/* Disable sequence number increment */
+#define	AR5K_DCU_MISC_POST_FR_BKOFF_DIS	0x00200000	/* Disable post-frame backoff */
+#define	AR5K_DCU_MISC_VIRT_COLL_POLICY	0x00400000	/* Virtual Collision cw policy */
+#define	AR5K_DCU_MISC_BLOWN_IFS_POLICY	0x00800000	/* Blown IFS policy (?) */
 #define	AR5K_DCU_MISC_SEQNUM_CTL	0x01000000	/* Sequence number control (?) */
 #define AR5K_QUEUE_DFS_MISC(_q)		AR5K_QUEUE_REG(AR5K_DCU_MISC_BASE, _q)
 
 /*
  * DCU frame sequence number registers
  */
-#define AR5K_DCU_SEQNUM_BASE	0x1140
-#define	AR5K_DCU_SEQNUM_M	0x00000fff
+#define AR5K_DCU_SEQNUM_BASE		0x1140
+#define	AR5K_DCU_SEQNUM_M		0x00000fff
 #define	AR5K_QUEUE_DFS_SEQNUM(_q)	AR5K_QUEUE_REG(AR5K_DCU_SEQNUM_BASE, _q)
 
 /*
- * DCU global IFS SIFS registers
+ * DCU global IFS SIFS register
  */
 #define AR5K_DCU_GBL_IFS_SIFS	0x1030
 #define AR5K_DCU_GBL_IFS_SIFS_M	0x0000ffff
 
 /*
- * DCU global IFS slot interval registers
+ * DCU global IFS slot interval register
  */
 #define AR5K_DCU_GBL_IFS_SLOT	0x1070
 #define AR5K_DCU_GBL_IFS_SLOT_M	0x0000ffff
 
 /*
- * DCU global IFS EIFS registers
+ * DCU global IFS EIFS register
  */
 #define AR5K_DCU_GBL_IFS_EIFS	0x10b0
 #define AR5K_DCU_GBL_IFS_EIFS_M	0x0000ffff
 
 /*
- * DCU global IFS misc registers
+ * DCU global IFS misc register
+ *
+ * LFSR stands for Linear Feedback Shift Register
+ * and it's used for generating pseudo-random
+ * number sequences.
+ *
+ * (If i understand corectly, random numbers are
+ * used for idle sensing -multiplied with cwmin/max etc-)
  */
 #define AR5K_DCU_GBL_IFS_MISC			0x10f0			/* Register Address */
-#define	AR5K_DCU_GBL_IFS_MISC_LFSR_SLICE	0x00000007
-#define	AR5K_DCU_GBL_IFS_MISC_TURBO_MODE	0x00000008	/* Turbo mode (?) */
-#define	AR5K_DCU_GBL_IFS_MISC_SIFS_DUR_USEC	0x000003f0	/* SIFS Duration mask (?) */
-#define	AR5K_DCU_GBL_IFS_MISC_USEC_DUR		0x000ffc00
-#define	AR5K_DCU_GBL_IFS_MISC_DCU_ARB_DELAY	0x00300000
+#define	AR5K_DCU_GBL_IFS_MISC_LFSR_SLICE	0x00000007	/* LFSR Slice Select */
+#define	AR5K_DCU_GBL_IFS_MISC_TURBO_MODE	0x00000008	/* Turbo mode */
+#define	AR5K_DCU_GBL_IFS_MISC_SIFS_DUR_USEC	0x000003f0	/* SIFS Duration mask */
+#define	AR5K_DCU_GBL_IFS_MISC_USEC_DUR		0x000ffc00	/* USEC Duration mask */
+#define	AR5K_DCU_GBL_IFS_MISC_DCU_ARB_DELAY	0x00300000	/* DCU Arbiter delay mask */
+#define AR5K_DCU_GBL_IFS_MISC_SIFS_CNT_RST	0x00400000	/* SIFC cnt reset policy (?) */
+#define AR5K_DCU_GBL_IFS_MISC_AIFS_CNT_RST	0x00800000	/* AIFS cnt reset policy (?) */
+#define AR5K_DCU_GBL_IFS_MISC_RND_LFSR_SL_DIS	0x01000000	/* Disable random LFSR slice */
 
 /*
  * DCU frame prefetch control register
  */
-#define AR5K_DCU_FP		0x1230
+#define AR5K_DCU_FP			0x1230			/* Register Address */
+#define AR5K_DCU_FP_NOBURST_DCU_EN	0x00000001	/* Enable non-burst prefetch on DCU (?) */
+#define AR5K_DCU_FP_NOBURST_EN		0x00000010	/* Enable non-burst prefetch (?) */
+#define AR5K_DCU_FP_BURST_DCU_EN	0x00000020	/* Enable burst prefetch on DCU (?) */
 
 /*
  * DCU transmit pause control/status register
  */
 #define AR5K_DCU_TXP		0x1270			/* Register Address */
-#define	AR5K_DCU_TXP_M		0x000003ff	/* Tx pause mask (?) */
-#define	AR5K_DCU_TXP_STATUS	0x00010000	/* Tx pause status (?) */
+#define	AR5K_DCU_TXP_M		0x000003ff	/* Tx pause mask */
+#define	AR5K_DCU_TXP_STATUS	0x00010000	/* Tx pause status */
+
+/*
+ * DCU transmit filter table 0 (32 entries)
+ */
+#define AR5K_DCU_TX_FILTER_0_BASE	0x1038
+#define	AR5K_DCU_TX_FILTER_0(_n)	(AR5K_DCU_TX_FILTER_0_BASE + (_n * 64))
 
 /*
- * DCU transmit filter register
+ * DCU transmit filter table 1 (16 entries)
  */
-#define AR5K_DCU_TX_FILTER	0x1038
+#define AR5K_DCU_TX_FILTER_1_BASE	0x103c
+#define	AR5K_DCU_TX_FILTER_1(_n)	(AR5K_DCU_TX_FILTER_1_BASE + ((_n - 32) * 64))
 
 /*
  * DCU clear transmit filter register
@@ -739,9 +812,6 @@
 
 /*
  * Reset control register
- *
- * 4 and 8 are not used in 5211/5212 and
- * 2 means "baseband reset" on 5211/5212.
  */
 #define AR5K_RESET_CTL		0x4000			/* Register Address */
 #define AR5K_RESET_CTL_PCU	0x00000001	/* Protocol Control Unit reset */
@@ -765,6 +835,7 @@
 #define AR5K_SLEEP_CTL_SLE_SLP		0x00010000	/* Force chip sleep */
 #define AR5K_SLEEP_CTL_SLE_ALLOW	0x00020000
 #define AR5K_SLEEP_CTL_SLE_UNITS	0x00000008	/* [5211+] */
+/* more bits */
 
 /*
  * Interrupt pending register
@@ -776,13 +847,14 @@
  * Sleep force register
  */
 #define AR5K_SFR	0x400c
-#define AR5K_SFR_M	0x00000001
+#define AR5K_SFR_EN	0x00000001
 
 /*
  * PCI configuration register
  */
 #define AR5K_PCICFG			0x4010			/* Register Address */
 #define AR5K_PCICFG_EEAE		0x00000001	/* Eeprom access enable [5210] */
+#define	AR5K_PCICFG_SLEEP_CLOCK_EN	0x00000002	/* Enable sleep clock (?) */
 #define AR5K_PCICFG_CLKRUNEN		0x00000004	/* CLKRUN enable [5211+] */
 #define AR5K_PCICFG_EESIZE		0x00000018	/* Mask for EEPROM size [5211+] */
 #define AR5K_PCICFG_EESIZE_S		3
@@ -798,19 +870,21 @@
 #define	AR5K_PCICFG_CBEFIX_DIS		0x00000400	/* Disable CBE fix (?) */
 #define AR5K_PCICFG_SL_INTEN		0x00000800	/* Enable interrupts when asleep (?) */
 #define AR5K_PCICFG_LED_BCTL		0x00001000	/* Led blink (?) [5210] */
-#define AR5K_PCICFG_SL_INPEN		0x00002800	/* Sleep even whith pending interrupts (?) */
+#define	AR5K_PCICFG_UNK			0x00001000	/* Passed on some parts durring attach (?) */
+#define AR5K_PCICFG_SL_INPEN		0x00002000	/* Sleep even whith pending interrupts (?) */
 #define AR5K_PCICFG_SPWR_DN		0x00010000	/* Mask for power status */
 #define AR5K_PCICFG_LEDMODE		0x000e0000	/* Ledmode [5211+] */
 #define AR5K_PCICFG_LEDMODE_PROP	0x00000000	/* Blink on standard traffic [5211+] */
 #define AR5K_PCICFG_LEDMODE_PROM	0x00020000	/* Default mode (blink on any traffic) [5211+] */
 #define AR5K_PCICFG_LEDMODE_PWR		0x00040000	/* Some other blinking mode  (?) [5211+] */
 #define AR5K_PCICFG_LEDMODE_RAND	0x00060000	/* Random blinking (?) [5211+] */
-#define AR5K_PCICFG_LEDBLINK		0x00700000
+#define AR5K_PCICFG_LEDBLINK		0x00700000	/* Led blink rate */
 #define AR5K_PCICFG_LEDBLINK_S		20
-#define AR5K_PCICFG_LEDSLOW		0x00800000	/* Slow led blink rate (?) [5211+] */
+#define AR5K_PCICFG_LEDSLOW		0x00800000	/* Slowest led blink rate [5211+] */
 #define AR5K_PCICFG_LEDSTATE				\
 	(AR5K_PCICFG_LED | AR5K_PCICFG_LEDMODE |	\
 	AR5K_PCICFG_LEDBLINK | AR5K_PCICFG_LEDSLOW)
+#define	AR5K_PCICFG_SLEEP_CLOCK_RATE	0x03000000	/* Sleep clock rate (field) */
 
 /*
  * "General Purpose Input/Output" (GPIO) control register
@@ -947,7 +1021,7 @@
 #define AR5K_EEPROM_VERSION_4_4		0x4004
 #define AR5K_EEPROM_VERSION_4_5		0x4005
 #define AR5K_EEPROM_VERSION_4_6		0x4006	/* has ee_scaled_cck_delta */
-#define AR5K_EEPROM_VERSION_4_7		0x3007
+#define AR5K_EEPROM_VERSION_4_7		0x4007
 
 #define AR5K_EEPROM_MODE_11A		0
 #define AR5K_EEPROM_MODE_11B		1
@@ -1023,10 +1097,14 @@
 #define AR5K_EEPROM_STAT_WRDONE	0x00000008	/* EEPROM write successful */
 
 /*
- * EEPROM config register (?)
+ * EEPROM config register
  */
-#define AR5K_EEPROM_CFG	0x6010
-
+#define AR5K_EEPROM_CFG			0x6010			/* Register Addres */
+#define AR5K_EEPROM_CFG_SIZE_OVR	0x00000001
+#define AR5K_EEPROM_CFG_WR_WAIT_DIS	0x00000004	/* Disable write wait */
+#define AR5K_EEPROM_CFG_CLK_RATE	0x00000018	/* Clock rate */
+#define AR5K_EEPROM_CFG_PROT_KEY	0x00ffff00	/* Protectio key */
+#define AR5K_EEPROM_CFG_LIND_EN		0x01000000	/* Enable length indicator (?) */
 
 
 /*
@@ -1050,7 +1128,7 @@
 #define AR5K_STA_ID1			0x8004			/* Register Address */
 #define AR5K_STA_ID1_AP			0x00010000	/* Set AP mode */
 #define AR5K_STA_ID1_ADHOC		0x00020000	/* Set Ad-Hoc mode */
-#define AR5K_STA_ID1_PWR_SV		0x00040000	/* Power save reporting (?) */
+#define AR5K_STA_ID1_PWR_SV		0x00040000	/* Power save reporting */
 #define AR5K_STA_ID1_NO_KEYSRCH		0x00080000	/* No key search */
 #define AR5K_STA_ID1_NO_PSPOLL		0x00100000	/* No power save polling [5210] */
 #define AR5K_STA_ID1_PCF_5211		0x00100000	/* Enable PCF on [5211+] */
@@ -1059,9 +1137,13 @@
 					AR5K_STA_ID1_PCF_5210 : AR5K_STA_ID1_PCF_5211)
 #define AR5K_STA_ID1_DEFAULT_ANTENNA	0x00200000	/* Use default antenna */
 #define AR5K_STA_ID1_DESC_ANTENNA	0x00400000	/* Update antenna from descriptor */
-#define AR5K_STA_ID1_RTS_DEF_ANTENNA	0x00800000	/* Use default antenna for RTS (?) */
-#define AR5K_STA_ID1_ACKCTS_6MB		0x01000000	/* Use 6Mbit/s for ACK/CTS (?) */
+#define AR5K_STA_ID1_RTS_DEF_ANTENNA	0x00800000	/* Use default antenna for RTS */
+#define AR5K_STA_ID1_ACKCTS_6MB		0x01000000	/* Use 6Mbit/s for ACK/CTS */
 #define AR5K_STA_ID1_BASE_RATE_11B	0x02000000	/* Use 11b base rate (for ACK/CTS ?) [5211+] */
+#define AR5K_STA_ID1_SELF_GEN_SECTORE	0x04000000	/* Self generate sectore (?) */
+#define AR5K_STA_ID1_CRYPT_MIC_EN	0x08000000	/* Enable MIC */
+#define AR5K_STA_ID1_KEYSRCH_MODE	0x10000000	/* Keysearch mode (?) */
+#define AR5K_STA_ID1_PRESERVE_SEQ_NUM	0x20000000	/* Preserve sequence number */
 
 /*
  * First BSSID register (MAC address, lower 32bits)
@@ -1117,7 +1199,7 @@
  *
  * Retry limit register for 5210 (no QCU/DCU so it's done in PCU)
  */
-#define AR5K_NODCU_RETRY_LMT		0x801c			/*Register Address */
+#define AR5K_NODCU_RETRY_LMT		0x801c			/* Register Address */
 #define AR5K_NODCU_RETRY_LMT_SH_RETRY	0x0000000f	/* Short retry limit mask */
 #define AR5K_NODCU_RETRY_LMT_SH_RETRY_S	0
 #define AR5K_NODCU_RETRY_LMT_LG_RETRY	0x000000f0	/* Long retry mask */
@@ -1136,9 +1218,9 @@
 #define AR5K_USEC_5211			0x801c			/* Register Address [5211+] */
 #define AR5K_USEC			(ah->ah_version == AR5K_AR5210 ? \
 					AR5K_USEC_5210 : AR5K_USEC_5211)
-#define AR5K_USEC_1			0x0000007f
+#define AR5K_USEC_1			0x0000007f	/* clock cycles for 1us */
 #define AR5K_USEC_1_S			0
-#define AR5K_USEC_32			0x00003f80
+#define AR5K_USEC_32			0x00003f80	/* clock cycles for 1us while on 32Mhz clock */
 #define AR5K_USEC_32_S			7
 #define AR5K_USEC_TX_LATENCY_5211	0x007fc000
 #define AR5K_USEC_TX_LATENCY_5211_S	14
@@ -1152,16 +1234,16 @@
 /*
  * PCU beacon control register
  */
-#define AR5K_BEACON_5210	0x8024
-#define AR5K_BEACON_5211	0x8020
+#define AR5K_BEACON_5210	0x8024			/*Register Address [5210] */
+#define AR5K_BEACON_5211	0x8020			/*Register Address [5211+] */
 #define AR5K_BEACON		(ah->ah_version == AR5K_AR5210 ? \
 				AR5K_BEACON_5210 : AR5K_BEACON_5211)
-#define AR5K_BEACON_PERIOD	0x0000ffff
+#define AR5K_BEACON_PERIOD	0x0000ffff	/* Mask for beacon period */
 #define AR5K_BEACON_PERIOD_S	0
-#define AR5K_BEACON_TIM		0x007f0000
+#define AR5K_BEACON_TIM		0x007f0000	/* Mask for TIM offset */
 #define AR5K_BEACON_TIM_S	16
-#define AR5K_BEACON_ENABLE	0x00800000
-#define AR5K_BEACON_RESET_TSF	0x01000000
+#define AR5K_BEACON_ENABLE	0x00800000	/* Enable beacons */
+#define AR5K_BEACON_RESET_TSF	0x01000000	/* Force TSF reset */
 
 /*
  * CFP period register
@@ -1234,7 +1316,6 @@
 
 /*
  * Receive filter register
- * TODO: Get these out of ar5xxx.h on ath5k
  */
 #define AR5K_RX_FILTER_5210	0x804c			/* Register Address [5210] */
 #define AR5K_RX_FILTER_5211	0x803c			/* Register Address [5211+] */
@@ -1307,11 +1388,11 @@
 #define AR5K_DIAG_SW_5211		0x8048			/* Register Address [5211+] */
 #define AR5K_DIAG_SW			(ah->ah_version == AR5K_AR5210 ? \
 					AR5K_DIAG_SW_5210 : AR5K_DIAG_SW_5211)
-#define AR5K_DIAG_SW_DIS_WEP_ACK	0x00000001
-#define AR5K_DIAG_SW_DIS_ACK		0x00000002	/* Disable ACKs (?) */
-#define AR5K_DIAG_SW_DIS_CTS		0x00000004	/* Disable CTSs (?) */
-#define AR5K_DIAG_SW_DIS_ENC		0x00000008	/* Disable encryption (?) */
-#define AR5K_DIAG_SW_DIS_DEC		0x00000010	/* Disable decryption (?) */
+#define AR5K_DIAG_SW_DIS_WEP_ACK	0x00000001	/* Disable ACKs if WEP key is invalid */
+#define AR5K_DIAG_SW_DIS_ACK		0x00000002	/* Disable ACKs */
+#define AR5K_DIAG_SW_DIS_CTS		0x00000004	/* Disable CTSs */
+#define AR5K_DIAG_SW_DIS_ENC		0x00000008	/* Disable encryption */
+#define AR5K_DIAG_SW_DIS_DEC		0x00000010	/* Disable decryption */
 #define AR5K_DIAG_SW_DIS_TX		0x00000020	/* Disable transmit [5210] */
 #define AR5K_DIAG_SW_DIS_RX_5210	0x00000040	/* Disable recieve */
 #define AR5K_DIAG_SW_DIS_RX_5211	0x00000020
@@ -1329,13 +1410,13 @@
 #define AR5K_DIAG_SW_CHAN_INFO_5211	0x00000100
 #define AR5K_DIAG_SW_CHAN_INFO		(ah->ah_version == AR5K_AR5210 ? \
 					AR5K_DIAG_SW_CHAN_INFO_5210 : AR5K_DIAG_SW_CHAN_INFO_5211)
-#define AR5K_DIAG_SW_EN_SCRAM_SEED_5211	0x00000200	/* Scrambler seed (?) */
+#define AR5K_DIAG_SW_EN_SCRAM_SEED_5211	0x00000200	/* Enable scrambler seed */
 #define AR5K_DIAG_SW_EN_SCRAM_SEED_5210	0x00000400
 #define AR5K_DIAG_SW_EN_SCRAM_SEED	(ah->ah_version == AR5K_AR5210 ? \
 					AR5K_DIAG_SW_EN_SCRAM_SEED_5210 : AR5K_DIAG_SW_EN_SCRAM_SEED_5211)
 #define AR5K_DIAG_SW_ECO_ENABLE		0x00000400	/* [5211+] */
 #define AR5K_DIAG_SW_SCVRAM_SEED	0x0003f800	/* [5210] */
-#define AR5K_DIAG_SW_SCRAM_SEED_M	0x0001fc00	/* Scrambler seed mask (?) */
+#define AR5K_DIAG_SW_SCRAM_SEED_M	0x0001fc00	/* Scrambler seed mask */
 #define AR5K_DIAG_SW_SCRAM_SEED_S	10
 #define AR5K_DIAG_SW_DIS_SEQ_INC	0x00040000	/* Disable seqnum increment (?)[5210] */
 #define AR5K_DIAG_SW_FRAME_NV0_5210	0x00080000
@@ -1344,6 +1425,7 @@
 					AR5K_DIAG_SW_FRAME_NV0_5210 : AR5K_DIAG_SW_FRAME_NV0_5211)
 #define AR5K_DIAG_SW_OBSPT_M		0x000c0000
 #define AR5K_DIAG_SW_OBSPT_S		18
+/* more bits */
 
 /*
  * TSF (clock) register (lower 32 bits)
@@ -1369,15 +1451,34 @@
 /*
  * ADDAC test register [5211+]
  */
-#define AR5K_ADDAC_TEST	0x8054
-#define AR5K_ADDAC_TEST_TXCONT 0x00000001
+#define AR5K_ADDAC_TEST			0x8054			/* Register Address */
+#define AR5K_ADDAC_TEST_TXCONT 		0x00000001	/* Test continuous tx */
+#define AR5K_ADDAC_TEST_TST_MODE	0x00000002	/* Test mode */
+#define AR5K_ADDAC_TEST_LOOP_EN		0x00000004	/* Enable loop */
+#define AR5K_ADDAC_TEST_LOOP_LEN	0x00000008	/* Loop length (field) */
+#define AR5K_ADDAC_TEST_USE_U8		0x00004000	/* Use upper 8 bits */
+#define AR5K_ADDAC_TEST_MSB		0x00008000	/* State of MSB */
+#define AR5K_ADDAC_TEST_TRIG_SEL	0x00010000	/* Trigger select */
+#define AR5K_ADDAC_TEST_TRIG_PTY	0x00020000	/* Trigger polarity */
+#define AR5K_ADDAC_TEST_RXCONT		0x00040000	/* Continuous capture */
+#define AR5K_ADDAC_TEST_CAPTURE		0x00080000	/* Begin capture */
+#define AR5K_ADDAC_TEST_TST_ARM		0x00100000	/* Test ARM (Adaptive Radio Mode ?) */
 
 /*
  * Default antenna register [5211+]
  */
 #define AR5K_DEFAULT_ANTENNA	0x8058
 
+/*
+ * Frame control QoS mask register (?) [5211+]
+ * (FC_QOS_MASK)
+ */
+#define AR5K_FRAME_CTL_QOSM	0x805c
 
+/*
+ * Seq mask register (?) [5211+]
+ */
+#define AR5K_SEQ_MASK	0x8060
 
 /*
  * Retry count register [5210]
@@ -1449,124 +1550,242 @@
 /*
  * XR (eXtended Range) mode register
  */
-#define AR5K_XRMODE			0x80c0
-#define	AR5K_XRMODE_POLL_TYPE_M		0x0000003f
+#define AR5K_XRMODE			0x80c0			/* Register Address */
+#define	AR5K_XRMODE_POLL_TYPE_M		0x0000003f	/* Mask for Poll type (?) */
 #define	AR5K_XRMODE_POLL_TYPE_S		0
-#define	AR5K_XRMODE_POLL_SUBTYPE_M	0x0000003c
+#define	AR5K_XRMODE_POLL_SUBTYPE_M	0x0000003c	/* Mask for Poll subtype (?) */
 #define	AR5K_XRMODE_POLL_SUBTYPE_S	2
-#define	AR5K_XRMODE_POLL_WAIT_ALL	0x00000080
-#define	AR5K_XRMODE_SIFS_DELAY		0x000fff00
-#define	AR5K_XRMODE_FRAME_HOLD_M	0xfff00000
+#define	AR5K_XRMODE_POLL_WAIT_ALL	0x00000080	/* Wait for poll */
+#define	AR5K_XRMODE_SIFS_DELAY		0x000fff00	/* Mask for SIFS delay */
+#define	AR5K_XRMODE_FRAME_HOLD_M	0xfff00000	/* Mask for frame hold (?) */
 #define	AR5K_XRMODE_FRAME_HOLD_S	20
 
 /*
  * XR delay register
  */
-#define AR5K_XRDELAY			0x80c4
-#define AR5K_XRDELAY_SLOT_DELAY_M	0x0000ffff
+#define AR5K_XRDELAY			0x80c4			/* Register Address */
+#define AR5K_XRDELAY_SLOT_DELAY_M	0x0000ffff	/* Mask for slot delay */
 #define AR5K_XRDELAY_SLOT_DELAY_S	0
-#define AR5K_XRDELAY_CHIRP_DELAY_M	0xffff0000
+#define AR5K_XRDELAY_CHIRP_DELAY_M	0xffff0000	/* Mask for CHIRP data delay */
 #define AR5K_XRDELAY_CHIRP_DELAY_S	16
 
 /*
  * XR timeout register
  */
-#define AR5K_XRTIMEOUT			0x80c8
-#define AR5K_XRTIMEOUT_CHIRP_M		0x0000ffff
+#define AR5K_XRTIMEOUT			0x80c8			/* Register Address */
+#define AR5K_XRTIMEOUT_CHIRP_M		0x0000ffff	/* Mask for CHIRP timeout */
 #define AR5K_XRTIMEOUT_CHIRP_S		0
-#define AR5K_XRTIMEOUT_POLL_M		0xffff0000
+#define AR5K_XRTIMEOUT_POLL_M		0xffff0000	/* Mask for Poll timeout */
 #define AR5K_XRTIMEOUT_POLL_S		16
 
 /*
  * XR chirp register
  */
-#define AR5K_XRCHIRP			0x80cc
-#define AR5K_XRCHIRP_SEND		0x00000001
-#define AR5K_XRCHIRP_GAP		0xffff0000
+#define AR5K_XRCHIRP			0x80cc			/* Register Address */
+#define AR5K_XRCHIRP_SEND		0x00000001	/* Send CHIRP */
+#define AR5K_XRCHIRP_GAP		0xffff0000	/* Mask for CHIRP gap (?) */
 
 /*
  * XR stomp register
  */
-#define AR5K_XRSTOMP			0x80d0
-#define AR5K_XRSTOMP_TX			0x00000001
-#define AR5K_XRSTOMP_RX_ABORT		0x00000002
-#define AR5K_XRSTOMP_RSSI_THRES		0x0000ff00
+#define AR5K_XRSTOMP			0x80d0			/* Register Address */
+#define AR5K_XRSTOMP_TX			0x00000001	/* Stomp Tx (?) */
+#define AR5K_XRSTOMP_RX			0x00000002	/* Stomp Rx (?) */
+#define AR5K_XRSTOMP_TX_RSSI		0x00000004	/* Stomp Tx RSSI (?) */
+#define AR5K_XRSTOMP_TX_BSSID		0x00000008	/* Stomp Tx BSSID (?) */
+#define AR5K_XRSTOMP_DATA		0x00000010	/* Stomp data (?)*/
+#define AR5K_XRSTOMP_RSSI_THRES		0x0000ff00	/* Mask for XR RSSI threshold */
 
 /*
  * First enhanced sleep register
  */
-#define AR5K_SLEEP0			0x80d4
-#define AR5K_SLEEP0_NEXT_DTIM		0x0007ffff
+#define AR5K_SLEEP0			0x80d4			/* Register Address */
+#define AR5K_SLEEP0_NEXT_DTIM		0x0007ffff	/* Mask for next DTIM (?) */
 #define AR5K_SLEEP0_NEXT_DTIM_S		0
-#define AR5K_SLEEP0_ASSUME_DTIM		0x00080000
-#define AR5K_SLEEP0_ENH_SLEEP_EN	0x00100000
-#define AR5K_SLEEP0_CABTO		0xff000000
+#define AR5K_SLEEP0_ASSUME_DTIM		0x00080000	/* Assume DTIM */
+#define AR5K_SLEEP0_ENH_SLEEP_EN	0x00100000	/* Enable enchanced sleep control */
+#define AR5K_SLEEP0_CABTO		0xff000000	/* Mask for CAB Time Out */
 #define AR5K_SLEEP0_CABTO_S		24
 
 /*
  * Second enhanced sleep register
  */
-#define AR5K_SLEEP1			0x80d8
-#define AR5K_SLEEP1_NEXT_TIM		0x0007ffff
+#define AR5K_SLEEP1			0x80d8			/* Register Address */
+#define AR5K_SLEEP1_NEXT_TIM		0x0007ffff	/* Mask for next TIM (?) */
 #define AR5K_SLEEP1_NEXT_TIM_S		0
-#define AR5K_SLEEP1_BEACON_TO		0xff000000
+#define AR5K_SLEEP1_BEACON_TO		0xff000000	/* Mask for Beacon Time Out */
 #define AR5K_SLEEP1_BEACON_TO_S		24
 
 /*
  * Third enhanced sleep register
  */
-#define AR5K_SLEEP2			0x80dc
-#define AR5K_SLEEP2_TIM_PER		0x0000ffff
+#define AR5K_SLEEP2			0x80dc			/* Register Address */
+#define AR5K_SLEEP2_TIM_PER		0x0000ffff	/* Mask for TIM period (?) */
 #define AR5K_SLEEP2_TIM_PER_S		0
-#define AR5K_SLEEP2_DTIM_PER		0xffff0000
+#define AR5K_SLEEP2_DTIM_PER		0xffff0000	/* Mask for DTIM period (?) */
 #define AR5K_SLEEP2_DTIM_PER_S		16
 
 /*
  * BSSID mask registers
  */
-#define AR5K_BSS_IDM0			0x80e0
-#define AR5K_BSS_IDM1			0x80e4
+#define AR5K_BSS_IDM0			0x80e0	/* Upper bits */
+#define AR5K_BSS_IDM1			0x80e4	/* Lower bits */
 
 /*
  * TX power control (TPC) register
+ *
+ * XXX: PCDAC steps (0.5dbm) or DBM ?
+ *
+ * XXX: Mask changes for newer chips to 7f
+ *      like tx power table ?
  */
-#define AR5K_TXPC			0x80e8
-#define AR5K_TXPC_ACK_M			0x0000003f
+#define AR5K_TXPC			0x80e8			/* Register Address */
+#define AR5K_TXPC_ACK_M			0x0000003f	/* Mask for ACK tx power */
 #define AR5K_TXPC_ACK_S			0
-#define AR5K_TXPC_CTS_M			0x00003f00
+#define AR5K_TXPC_CTS_M			0x00003f00	/* Mask for CTS tx power */
 #define AR5K_TXPC_CTS_S			8
-#define AR5K_TXPC_CHIRP_M		0x003f0000
+#define AR5K_TXPC_CHIRP_M		0x003f0000	/* Mask for CHIRP tx power */
 #define AR5K_TXPC_CHIRP_S		22
 
 /*
  * Profile count registers
  */
-#define AR5K_PROFCNT_TX			0x80ec
-#define AR5K_PROFCNT_RX			0x80f0
-#define AR5K_PROFCNT_RXCLR		0x80f4
-#define AR5K_PROFCNT_CYCLE		0x80f8
+#define AR5K_PROFCNT_TX			0x80ec	/* Tx count */
+#define AR5K_PROFCNT_RX			0x80f0	/* Rx count */
+#define AR5K_PROFCNT_RXCLR		0x80f4	/* Clear Rx count */
+#define AR5K_PROFCNT_CYCLE		0x80f8	/* Cycle count (?) */
+
+/*
+ * Quiet (period) control registers (?)
+ */
+#define AR5K_QUIET_CTL1			0x80fc			/* Register Address */
+#define AR5K_QUIET_CTL1_NEXT_QT		0x0000ffff	/* Mask for next quiet (period?) (?) */
+#define AR5K_QUIET_CTL1_QT_EN		0x00010000	/* Enable quiet (period?) */
+#define AR5K_QUIET_CTL2			0x8100			/* Register Address */
+#define AR5K_QUIET_CTL2_QT_PER		0x0000ffff	/* Mask for quiet period (?) */
+#define AR5K_QUIET_CTL2_QT_DUR		0xffff0000	/* Mask for quiet duration (?) */
 
 /*
  * TSF parameter register
  */
-#define AR5K_TSF_PARM			0x8104
-#define AR5K_TSF_PARM_INC_M		0x000000ff
+#define AR5K_TSF_PARM			0x8104			/* Register Address */
+#define AR5K_TSF_PARM_INC_M		0x000000ff	/* Mask for TSF increment */
 #define AR5K_TSF_PARM_INC_S		0
 
 /*
+ * QoS register (?)
+ */
+#define AR5K_QOS			0x8108			/* Register Address */
+#define AR5K_QOS_NOACK_2BIT_VALUES	0x00000000	/* (field) */
+#define AR5K_QOS_NOACK_BIT_OFFSET	0x00000020	/* (field) */
+#define AR5K_QOS_NOACK_BYTE_OFFSET	0x00000080	/* (field) */
+
+/*
  * PHY error filter register
  */
 #define AR5K_PHY_ERR_FIL		0x810c
-#define AR5K_PHY_ERR_FIL_RADAR		0x00000020
-#define AR5K_PHY_ERR_FIL_OFDM		0x00020000
-#define AR5K_PHY_ERR_FIL_CCK		0x02000000
+#define AR5K_PHY_ERR_FIL_RADAR		0x00000020	/* Radar signal */
+#define AR5K_PHY_ERR_FIL_OFDM		0x00020000	/* OFDM false detect (ANI) */
+#define AR5K_PHY_ERR_FIL_CCK		0x02000000	/* CCK false detect (ANI) */
+
+/*
+ * XR latency register
+ */
+#define AR5K_XRLAT_TX		0x8110
 
 /*
- * Rate duration register
+ * ACK SIFS register
+ */
+#define AR5K_ACKSIFS		0x8114			/* Register Address */
+#define AR5K_ACKSIFS_INC	0x00000000	/* ACK SIFS Increment (field) */
+
+/*
+ * MIC QoS control register (?)
+ */
+#define	AR5K_MIC_QOS_CTL	0x8118			/* Register Address */
+#define	AR5K_MIC_QOS_CTL_0	0x00000001	/* MIC QoS control 0 (?) */
+#define	AR5K_MIC_QOS_CTL_1	0x00000004	/* MIC QoS control 1 (?) */
+#define	AR5K_MIC_QOS_CTL_2	0x00000010	/* MIC QoS control 2 (?) */
+#define	AR5K_MIC_QOS_CTL_3	0x00000040	/* MIC QoS control 3 (?) */
+#define	AR5K_MIC_QOS_CTL_4	0x00000100	/* MIC QoS control 4 (?) */
+#define	AR5K_MIC_QOS_CTL_5	0x00000400	/* MIC QoS control 5 (?) */
+#define	AR5K_MIC_QOS_CTL_6	0x00001000	/* MIC QoS control 6 (?) */
+#define	AR5K_MIC_QOS_CTL_7	0x00004000	/* MIC QoS control 7 (?) */
+#define	AR5K_MIC_QOS_CTL_MQ_EN	0x00010000	/* Enable MIC QoS */
+
+/*
+ * MIC QoS select register (?)
+ */
+#define	AR5K_MIC_QOS_SEL	0x811c
+#define	AR5K_MIC_QOS_SEL_0	0x00000001
+#define	AR5K_MIC_QOS_SEL_1	0x00000010
+#define	AR5K_MIC_QOS_SEL_2	0x00000100
+#define	AR5K_MIC_QOS_SEL_3	0x00001000
+#define	AR5K_MIC_QOS_SEL_4	0x00010000
+#define	AR5K_MIC_QOS_SEL_5	0x00100000
+#define	AR5K_MIC_QOS_SEL_6	0x01000000
+#define	AR5K_MIC_QOS_SEL_7	0x10000000
+
+/*
+ * Misc mode control register (?)
+ */
+#define	AR5K_MISC_MODE			0x8120			/* Register Address */
+#define	AR5K_MISC_MODE_FBSSID_MATCH	0x00000001	/* Force BSSID match */
+#define	AR5K_MISC_MODE_ACKSIFS_MEM	0x00000002	/* ACK SIFS memory (?) */
+/* more bits */
+
+/*
+ * OFDM Filter counter
+ */
+#define	AR5K_OFDM_FIL_CNT		0x8124
+
+/*
+ * CCK Filter counter
+ */
+#define	AR5K_CCK_FIL_CNT		0x8128
+
+/*
+ * PHY Error Counters (?)
+ */
+#define	AR5K_PHYERR_CNT1		0x812c
+#define	AR5K_PHYERR_CNT1_MASK		0x8130
+
+#define	AR5K_PHYERR_CNT2		0x8134
+#define	AR5K_PHYERR_CNT2_MASK		0x8138
+
+/*
+ * TSF Threshold register (?)
+ */
+#define	AR5K_TSF_THRES			0x813c
+
+/*
+ * Rate -> ACK SIFS mapping table (32 entries)
+ */
+#define	AR5K_RATE_ACKSIFS_BASE		0x8680			/* Register Address */
+#define	AR5K_RATE_ACKSIFS(_n)		(AR5K_RATE_ACKSIFS_BSE + ((_n) << 2))
+#define	AR5K_RATE_ACKSIFS_NORMAL	0x00000001	/* Normal SIFS (field) */
+#define	AR5K_RATE_ACKSIFS_TURBO		0x00000400	/* Turbo SIFS (field) */
+
+/*
+ * Rate -> duration mapping table (32 entries)
  */
 #define AR5K_RATE_DUR_BASE		0x8700
 #define AR5K_RATE_DUR(_n)		(AR5K_RATE_DUR_BASE + ((_n) << 2))
 
+/*
+ * Rate -> db mapping table
+ * (8 entries, each one has 4 8bit fields)
+ */
+#define AR5K_RATE2DB_BASE		0x87c0
+#define AR5K_RATE2DB(_n)		(AR5K_RATE2DB_BASE + ((_n) << 2))
+
+/*
+ * db -> Rate mapping table
+ * (8 entries, each one has 4 8bit fields)
+ */
+#define AR5K_DB2RATE_BASE		0x87e0
+#define AR5K_DB2RATE(_n)		(AR5K_DB2RATE_BASE + ((_n) << 2))
+
 /*===5212 end===*/
 
 /*
@@ -1613,12 +1832,34 @@
 /*===PHY REGISTERS===*/
 
 /*
- * PHY register
+ * PHY registers start
  */
 #define	AR5K_PHY_BASE			0x9800
 #define	AR5K_PHY(_n)			(AR5K_PHY_BASE + ((_n) << 2))
-#define AR5K_PHY_SHIFT_2GHZ		0x00004007
-#define AR5K_PHY_SHIFT_5GHZ		0x00000007
+
+/*
+ * TST_2 (Misc config parameters)
+ */
+#define	AR5K_PHY_TST2			0x9800			/* Register Address */
+#define AR5K_PHY_TST2_TRIG_SEL		0x00000001	/* Trigger select (?) (field ?) */
+#define AR5K_PHY_TST2_TRIG		0x00000010	/* Trigger (?) (field ?) */
+#define AR5K_PHY_TST2_CBUS_MODE		0x00000100	/* Cardbus mode (?) */
+/* bit reserved */
+#define AR5K_PHY_TST2_CLK32		0x00000400	/* CLK_OUT is CLK32 (32Khz external) */
+#define AR5K_PHY_TST2_CHANCOR_DUMP_EN	0x00000800	/* Enable Chancor dump (?) */
+#define AR5K_PHY_TST2_EVEN_CHANCOR_DUMP	0x00001000	/* Even Chancor dump (?) */
+#define AR5K_PHY_TST2_RFSILENT_EN	0x00002000	/* Enable RFSILENT */
+#define AR5K_PHY_TST2_ALT_RFDATA	0x00004000	/* Alternate RFDATA (5-2GHz switch) */
+#define AR5K_PHY_TST2_MINI_OBS_EN	0x00008000	/* Enable mini OBS (?) */
+#define AR5K_PHY_TST2_RX2_IS_RX5_INV	0x00010000	/* 2GHz rx path is the 5GHz path inverted (?) */
+#define AR5K_PHY_TST2_SLOW_CLK160	0x00020000	/* Slow CLK160 (?) */
+#define AR5K_PHY_TST2_AGC_OBS_SEL_3	0x00040000	/* AGC OBS Select 3 (?) */
+#define AR5K_PHY_TST2_BBB_OBS_SEL	0x00080000	/* BB OBS Select (field ?) */
+#define AR5K_PHY_TST2_ADC_OBS_SEL	0x00800000	/* ADC OBS Select (field ?) */
+#define AR5K_PHY_TST2_RX_CLR_SEL	0x08000000	/* RX Clear Select (?) */
+#define AR5K_PHY_TST2_FORCE_AGC_CLR	0x10000000	/* Force AGC clear (?) */
+#define AR5K_PHY_SHIFT_2GHZ		0x00004007	/* Used to access 2GHz radios */
+#define AR5K_PHY_SHIFT_5GHZ		0x00000007	/* Used to access 5GHz radios (default) */
 
 /*
  * PHY frame control register [5110] /turbo mode register [5111+]
@@ -1630,18 +1871,21 @@
  * a "turbo mode register" for 5110. We treat this one as
  * a frame control register for 5110 below.
  */
-#define	AR5K_PHY_TURBO			0x9804
-#define	AR5K_PHY_TURBO_MODE		0x00000001
-#define	AR5K_PHY_TURBO_SHORT		0x00000002
+#define	AR5K_PHY_TURBO			0x9804			/* Register Address */
+#define	AR5K_PHY_TURBO_MODE		0x00000001	/* Enable turbo mode */
+#define	AR5K_PHY_TURBO_SHORT		0x00000002	/* Short mode (20Mhz channels) (?) */
 
 /*
  * PHY agility command register
+ * (aka TST_1)
  */
-#define	AR5K_PHY_AGC			0x9808
-#define	AR5K_PHY_AGC_DISABLE		0x08000000
+#define	AR5K_PHY_AGC			0x9808			/* Register Address */
+#define	AR5K_PHY_TST1			0x9808
+#define	AR5K_PHY_AGC_DISABLE		0x08000000	/* Disable AGC to A2 (?)*/
+#define	AR5K_PHY_TST1_TXHOLD		0x00003800	/* Set tx hold (?) */
 
 /*
- * PHY timing register [5112+]
+ * PHY timing register 3 [5112+]
  */
 #define	AR5K_PHY_TIMING_3		0x9814
 #define	AR5K_PHY_TIMING_3_DSC_MAN	0xfffe0000
@@ -1657,26 +1901,81 @@
 /*
  * PHY activation register
  */
-#define	AR5K_PHY_ACT			0x981c
-#define	AR5K_PHY_ACT_ENABLE		0x00000001
-#define	AR5K_PHY_ACT_DISABLE		0x00000002
+#define	AR5K_PHY_ACT			0x981c			/* Register Address */
+#define	AR5K_PHY_ACT_ENABLE		0x00000001	/* Activate PHY */
+#define	AR5K_PHY_ACT_DISABLE		0x00000002	/* Deactivate PHY */
+
+/*
+ * PHY RF control registers
+ * (i think these are delay times,
+ * these calibration values exist
+ * in EEPROM)
+ */
+#define AR5K_PHY_RF_CTL2		0x9824			/* Register Address */
+#define	AR5K_PHY_RF_CTL2_TXF2TXD_START	0x0000000f	/* Mask for TX frame to TX d(esc?) start */
+
+#define AR5K_PHY_RF_CTL3		0x9828			/* Register Address */
+#define AR5K_PHY_RF_CTL3_TXE2XLNA_ON	0x0000000f	/* Mask for TX end to XLNA on */
+
+#define AR5K_PHY_RF_CTL4		0x9834			/* Register Address */
+#define AR5K_PHY_RF_CTL4_TXF2XPA_A_ON	0x00000001	/* TX frame to XPA A on (field) */
+#define AR5K_PHY_RF_CTL4_TXF2XPA_B_ON	0x00000100	/* TX frame to XPA B on (field) */
+#define	AR5K_PHY_RF_CTL4_TXE2XPA_A_OFF	0x00010000	/* TX end to XPA A off (field) */
+#define AR5K_PHY_RF_CTL4_TXE2XPA_B_OFF	0x01000000	/* TX end to XPA B off (field) */
+
+/*
+ * Pre-Amplifier control register
+ * (XPA -> external pre-amplifier)
+ */
+#define	AR5K_PHY_PA_CTL			0x9838			/* Register Address */
+#define	AR5K_PHY_PA_CTL_XPA_A_HI	0x00000001	/* XPA A high (?) */
+#define	AR5K_PHY_PA_CTL_XPA_B_HI	0x00000002	/* XPA B high (?) */
+#define	AR5K_PHY_PA_CTL_XPA_A_EN	0x00000004	/* Enable XPA A */
+#define	AR5K_PHY_PA_CTL_XPA_B_EN	0x00000008	/* Enable XPA B */
+
+/*
+ * PHY settling register
+ */
+#define AR5K_PHY_SETTLING		0x9844			/* Register Address */
+#define	AR5K_PHY_SETTLING_AGC		0x0000007f	/* Mask for AGC settling time */
+#define	AR5K_PHY_SETTLING_SWITCH	0x00003f80	/* Mask for Switch settlig time */
+
+/*
+ * PHY Gain registers
+ */
+#define AR5K_PHY_GAIN			0x9848			/* Register Address */
+#define	AR5K_PHY_GAIN_TXRX_ATTEN	0x0003f000	/* Mask for TX-RX Attenuation */
+
+#define	AR5K_PHY_GAIN_OFFSET		0x984c			/* Register Address */
+#define	AR5K_PHY_GAIN_OFFSET_RXTX_FLAG	0x00020000	/* RX-TX flag (?) */
+
+/*
+ * Desired size register
+ * (for more infos read ANI patent)
+ */
+#define AR5K_PHY_DESIRED_SIZE		0x9850			/* Register Address */
+#define	AR5K_PHY_DESIRED_SIZE_ADC	0x000000ff	/* Mask for ADC desired size */
+#define	AR5K_PHY_DESIRED_SIZE_PGA	0x0000ff00	/* Mask for PGA desired size */
+#define	AR5K_PHY_DESIRED_SIZE_TOT	0x0ff00000	/* Mask for Total desired size (?) */
 
 /*
  * PHY signal register
+ * (for more infos read ANI patent)
  */
-#define	AR5K_PHY_SIG			0x9858
-#define	AR5K_PHY_SIG_FIRSTEP		0x0003f000
+#define	AR5K_PHY_SIG			0x9858			/* Register Address */
+#define	AR5K_PHY_SIG_FIRSTEP		0x0003f000	/* Mask for FIRSTEP */
 #define	AR5K_PHY_SIG_FIRSTEP_S		12
-#define	AR5K_PHY_SIG_FIRPWR		0x03fc0000
+#define	AR5K_PHY_SIG_FIRPWR		0x03fc0000	/* Mask for FIPWR */
 #define	AR5K_PHY_SIG_FIRPWR_S		18
 
 /*
  * PHY coarse agility control register
+ * (for more infos read ANI patent)
  */
-#define	AR5K_PHY_AGCCOARSE		0x985c
-#define	AR5K_PHY_AGCCOARSE_LO		0x00007f80
+#define	AR5K_PHY_AGCCOARSE		0x985c			/* Register Address */
+#define	AR5K_PHY_AGCCOARSE_LO		0x00007f80	/* Mask for AGC Coarse low */
 #define	AR5K_PHY_AGCCOARSE_LO_S		7
-#define	AR5K_PHY_AGCCOARSE_HI		0x003f8000
+#define	AR5K_PHY_AGCCOARSE_HI		0x003f8000	/* Mask for AGC Coarse high */
 #define	AR5K_PHY_AGCCOARSE_HI_S		15
 
 /*
@@ -1689,12 +1988,13 @@
 /*
  * PHY noise floor status register
  */
-#define AR5K_PHY_NF			0x9864
-#define AR5K_PHY_NF_M			0x000001ff
-#define AR5K_PHY_NF_ACTIVE		0x00000100
+#define AR5K_PHY_NF			0x9864			/* Register address */
+#define AR5K_PHY_NF_M			0x000001ff	/* Noise floor mask */
+#define AR5K_PHY_NF_ACTIVE		0x00000100	/* Noise floor calibration still active */
 #define AR5K_PHY_NF_RVAL(_n)		(((_n) >> 19) & AR5K_PHY_NF_M)
 #define AR5K_PHY_NF_AVAL(_n)		(-((_n) ^ AR5K_PHY_NF_M) + 1)
 #define AR5K_PHY_NF_SVAL(_n)		(((_n) & AR5K_PHY_NF_M) | (1 << 9))
+#define	AR5K_PHY_NF_THRESH62		0x00001000	/* Thresh62 -check ANI patent- (field) */
 
 /*
  * PHY ADC saturation register [5110]
@@ -1706,6 +2006,30 @@
 #define	AR5K_PHY_ADCSAT_THR_S		5
 
 /*
+ * PHY Weak ofdm signal detection threshold registers (ANI) [5212+]
+ */
+
+/* High thresholds */
+#define AR5K_PHY_WEAK_OFDM_HIGH_THR		0x9868
+#define AR5K_PHY_WEAK_OFDM_HIGH_THR_M2_COUNT	0x0000001f
+#define AR5K_PHY_WEAK_OFDM_HIGH_THR_M2_COUNT_S	0
+#define AR5K_PHY_WEAK_OFDM_HIGH_THR_M1		0x00fe0000
+#define AR5K_PHY_WEAK_OFDM_HIGH_THR_M1_S	17
+#define AR5K_PHY_WEAK_OFDM_HIGH_THR_M2		0x7f000000
+#define AR5K_PHY_WEAK_OFDM_HIGH_THR_M2_S	24
+
+/* Low thresholds */
+#define AR5K_PHY_WEAK_OFDM_LOW_THR 		0x986c
+#define AR5K_PHY_WEAK_OFDM_LOW_THR_SELFCOR_EN	0x00000001
+#define AR5K_PHY_WEAK_OFDM_LOW_THR_M2_COUNT	0x00003f00
+#define AR5K_PHY_WEAK_OFDM_LOW_THR_M2_COUNT_S	8
+#define AR5K_PHY_WEAK_OFDM_LOW_THR_M1		0x001fc000
+#define AR5K_PHY_WEAK_OFDM_LOW_THR_M1_S		14
+#define AR5K_PHY_WEAK_OFDM_LOW_THR_M2		0x0fe00000
+#define AR5K_PHY_WEAK_OFDM_LOW_THR_M2_S		21
+
+
+/*
  * PHY sleep registers [5112+]
  */
 #define AR5K_PHY_SCR			0x9870
@@ -1730,6 +2054,8 @@
 					AR5K_PHY_PLL_44MHZ_5211 : AR5K_PHY_PLL_44MHZ_5212)
 #define AR5K_PHY_PLL_RF5111		0x00000000
 #define AR5K_PHY_PLL_RF5112		0x00000040
+#define	AR5K_PHY_PLL_HALF_RATE		0x00000100
+#define	AR5K_PHY_PLL_QUARTER_RATE	0x00000200
 
 /*
  * RF Buffer register
@@ -1792,23 +2118,74 @@
 #define AR5K_PHY_RFSTG_DISABLE		0x00000021
 
 /*
+ * PHY Antenna control register
+ */
+#define AR5K_PHY_ANT_CTL		0x9910			/* Register Address */
+#define	AR5K_PHY_ANT_CTL_TXRX_EN	0x00000001	/* Enable TX/RX (?) */
+#define	AR5K_PHY_ANT_CTL_SECTORED_ANT	0x00000004	/* Sectored Antenna */
+#define	AR5K_PHY_ANT_CTL_HITUNE5	0x00000008	/* Hitune5 (?) */
+#define	AR5K_PHY_ANT_CTL_SWTABLE_IDLE	0x00000010	/* Switch table idle (?) */
+
+/*
  * PHY receiver delay register [5111+]
  */
-#define	AR5K_PHY_RX_DELAY		0x9914
-#define	AR5K_PHY_RX_DELAY_M		0x00003fff
+#define	AR5K_PHY_RX_DELAY		0x9914			/* Register Address */
+#define	AR5K_PHY_RX_DELAY_M		0x00003fff	/* Mask for RX activate to receive delay (/100ns) */
+
+/*
+ * PHY max rx length register (?) [5111]
+ */
+#define	AR5K_PHY_MAX_RX_LEN		0x991c
 
 /*
- * PHY timing I(nphase) Q(adrature) control register [5111+]
+ * PHY timing register 4
+ * I(nphase)/Q(adrature) calibration register [5111+]
  */
-#define	AR5K_PHY_IQ			0x9920		/* Register address */
+#define	AR5K_PHY_IQ			0x9920			/* Register Address */
 #define	AR5K_PHY_IQ_CORR_Q_Q_COFF	0x0000001f	/* Mask for q correction info */
 #define	AR5K_PHY_IQ_CORR_Q_I_COFF	0x000007e0	/* Mask for i correction info */
 #define	AR5K_PHY_IQ_CORR_Q_I_COFF_S	5
 #define	AR5K_PHY_IQ_CORR_ENABLE		0x00000800	/* Enable i/q correction */
-#define	AR5K_PHY_IQ_CAL_NUM_LOG_MAX	0x0000f000
+#define	AR5K_PHY_IQ_CAL_NUM_LOG_MAX	0x0000f000	/* Mask for max number of samples in log scale */
 #define	AR5K_PHY_IQ_CAL_NUM_LOG_MAX_S	12
 #define	AR5K_PHY_IQ_RUN			0x00010000	/* Run i/q calibration */
+#define	AR5K_PHY_IQ_USE_PT_DF		0x00020000	/* Use pilot track df (?) */
+#define	AR5K_PHY_IQ_EARLY_TRIG_THR	0x00200000	/* Early trigger threshold (?) (field) */
+#define	AR5K_PHY_IQ_PILOT_MASK_EN	0x10000000	/* Enable pilot mask (?) */
+#define	AR5K_PHY_IQ_CHAN_MASK_EN	0x20000000	/* Enable channel mask (?) */
+#define	AR5K_PHY_IQ_SPUR_FILT_EN	0x40000000	/* Enable spur filter */
+#define	AR5K_PHY_IQ_SPUR_RSSI_EN	0x80000000	/* Enable spur rssi */
 
+/*
+ * PHY timing register 5
+ * OFDM Self-correlator Cyclic RSSI threshold params
+ * (Check out bb_cycpwr_thr1 on ANI patent)
+ */
+#define	AR5K_PHY_OFDM_SELFCORR			0x9924			/* Register Address */
+#define	AR5K_PHY_OFDM_SELFCORR_CYPWR_THR1_EN	0x00000001	/* Enable cyclic RSSI thr 1 */
+#define	AR5K_PHY_OFDM_SELFCORR_CYPWR_THR1	0x000000fe	/* Mask for Cyclic RSSI threshold 1 */
+#define	AR5K_PHY_OFDM_SELFCORR_CYPWR_THR3	0x00000100	/* Cyclic RSSI threshold 3 (field) (?) */
+#define	AR5K_PHY_OFDM_SELFCORR_RSSI_1ATHR_EN	0x00008000	/* Enable 1A RSSI threshold (?) */
+#define	AR5K_PHY_OFDM_SELFCORR_RSSI_1ATHR	0x00010000	/* 1A RSSI threshold (field) (?) */
+#define	AR5K_PHY_OFDM_SELFCORR_LSCTHR_HIRSSI	0x00800000	/* Long sc threshold hi rssi (?) */
+
+/*
+ * PHY-only warm reset register
+ */
+#define	AR5K_PHY_WARM_RESET		0x9928
+
+/*
+ * PHY-only control register
+ */
+#define AR5K_PHY_CTL			0x992c			/* Register Address */
+#define	AR5K_PHY_CTL_RX_DRAIN_RATE	0x00000001	/* RX drain rate (?) */
+#define	AR5K_PHY_CTL_LATE_TX_SIG_SYM	0x00000002	/* Late tx signal symbol (?) */
+#define	AR5K_PHY_CTL_GEN_SCRAMBLER	0x00000004	/* Generate scrambler */
+#define	AR5K_PHY_CTL_TX_ANT_SEL		0x00000008	/* TX antenna select */
+#define	AR5K_PHY_CTL_TX_ANT_STATIC	0x00000010	/* Static TX antenna */
+#define	AR5K_PHY_CTL_RX_ANT_SEL		0x00000020	/* RX antenna select */
+#define	AR5K_PHY_CTL_RX_ANT_STATIC	0x00000040	/* Static RX antenna */
+#define	AR5K_PHY_CTL_LOW_FREQ_SLE_EN	0x00000080	/* Enable low freq sleep */
 
 /*
  * PHY PAPD probe register [5111+ (?)]
@@ -1816,9 +2193,13 @@
  * Because it's always 0 in 5211 initialization code
  */
 #define	AR5K_PHY_PAPD_PROBE		0x9930
+#define	AR5K_PHY_PAPD_PROBE_SH_HI_PAR	0x00000001
+#define	AR5K_PHY_PAPD_PROBE_PCDAC_BIAS	0x00000002
+#define	AR5K_PHY_PAPD_PROBE_COMP_GAIN	0x00000040
 #define	AR5K_PHY_PAPD_PROBE_TXPOWER	0x00007e00
 #define	AR5K_PHY_PAPD_PROBE_TXPOWER_S	9
 #define	AR5K_PHY_PAPD_PROBE_TX_NEXT	0x00008000
+#define	AR5K_PHY_PAPD_PROBE_PREDIST_EN	0x00010000
 #define	AR5K_PHY_PAPD_PROBE_TYPE	0x01800000	/* [5112+] */
 #define	AR5K_PHY_PAPD_PROBE_TYPE_S	23
 #define	AR5K_PHY_PAPD_PROBE_TYPE_OFDM	0
@@ -1848,15 +2229,16 @@
 #define	AR5K_PHY_FRAME_CTL		(ah->ah_version == AR5K_AR5210 ? \
 					AR5K_PHY_FRAME_CTL_5210 : AR5K_PHY_FRAME_CTL_5211)
 /*---[5111+]---*/
-#define	AR5K_PHY_FRAME_CTL_TX_CLIP	0x00000038
+#define	AR5K_PHY_FRAME_CTL_TX_CLIP	0x00000038	/* Mask for tx clip (?) */
 #define	AR5K_PHY_FRAME_CTL_TX_CLIP_S	3
+#define	AR5K_PHY_FRAME_CTL_PREP_CHINFO	0x00010000	/* Prepend chan info */
 /*---[5110/5111]---*/
-#define	AR5K_PHY_FRAME_CTL_TIMING_ERR	0x01000000
-#define	AR5K_PHY_FRAME_CTL_PARITY_ERR	0x02000000
-#define	AR5K_PHY_FRAME_CTL_ILLRATE_ERR	0x04000000	/* illegal rate */
-#define	AR5K_PHY_FRAME_CTL_ILLLEN_ERR	0x08000000	/* illegal length */
+#define	AR5K_PHY_FRAME_CTL_TIMING_ERR	0x01000000	/* PHY timing error */
+#define	AR5K_PHY_FRAME_CTL_PARITY_ERR	0x02000000	/* Parity error */
+#define	AR5K_PHY_FRAME_CTL_ILLRATE_ERR	0x04000000	/* Illegal rate */
+#define	AR5K_PHY_FRAME_CTL_ILLLEN_ERR	0x08000000	/* Illegal length */
 #define	AR5K_PHY_FRAME_CTL_SERVICE_ERR	0x20000000
-#define	AR5K_PHY_FRAME_CTL_TXURN_ERR	0x40000000	/* tx underrun */
+#define	AR5K_PHY_FRAME_CTL_TXURN_ERR	0x40000000	/* TX underrun */
 #define AR5K_PHY_FRAME_CTL_INI		AR5K_PHY_FRAME_CTL_SERVICE_ERR | \
 			AR5K_PHY_FRAME_CTL_TXURN_ERR | \
 			AR5K_PHY_FRAME_CTL_ILLLEN_ERR | \
@@ -1915,6 +2297,11 @@ after DFS is enabled */
 #define AR5K_PHY_ANT_SWITCH_TABLE_1	0x9964
 
 /*
+ * PHY Noise floor threshold
+ */
+#define AR5K_PHY_NFTHRES		0x9968
+
+/*
  * PHY clock sleep registers [5112+]
  */
 #define AR5K_PHY_SCLOCK			0x99f0
@@ -1922,56 +2309,116 @@ after DFS is enabled */
 #define AR5K_PHY_SDELAY			0x99f4
 #define AR5K_PHY_SDELAY_32MHZ		0x000000ff
 #define AR5K_PHY_SPENDING		0x99f8
+#define	AR5K_PHY_SPENDING_14		0x00000014
+#define	AR5K_PHY_SPENDING_18		0x00000018
 #define AR5K_PHY_SPENDING_RF5111	0x00000018
-#define AR5K_PHY_SPENDING_RF5112	0x00000014 /* <- i 've only seen this on 2425 dumps ! */
-#define AR5K_PHY_SPENDING_RF5112A	0x0000000e /* but since i only have 5112A-based chips */
-#define AR5K_PHY_SPENDING_RF5424	0x00000012 /* to test it might be also for old 5112.  */
+#define AR5K_PHY_SPENDING_RF5112	0x00000014
+/* #define AR5K_PHY_SPENDING_RF5112A	0x0000000e */
+/* #define AR5K_PHY_SPENDING_RF5424	0x00000012 */
+#define	AR5K_PHY_SPENDING_RF5413	0x00000014
+#define	AR5K_PHY_SPENDING_RF2413	0x00000014
+#define AR5K_PHY_SPENDING_RF2425	0x00000018
 
 /*
  * Misc PHY/radio registers [5110 - 5111]
  */
-#define	AR5K_BB_GAIN_BASE		0x9b00 /* BaseBand Amplifier Gain table base address */
+#define	AR5K_BB_GAIN_BASE		0x9b00	/* BaseBand Amplifier Gain table base address */
 #define AR5K_BB_GAIN(_n)		(AR5K_BB_GAIN_BASE + ((_n) << 2))
-#define	AR5K_RF_GAIN_BASE		0x9a00 /* RF Amplrifier Gain table base address */
+#define	AR5K_RF_GAIN_BASE		0x9a00	/* RF Amplrifier Gain table base address */
 #define AR5K_RF_GAIN(_n)		(AR5K_RF_GAIN_BASE + ((_n) << 2))
 
 /*
  * PHY timing IQ calibration result register [5111+]
  */
-#define	AR5K_PHY_IQRES_CAL_PWR_I	0x9c10 /* I (Inphase) power value */
-#define	AR5K_PHY_IQRES_CAL_PWR_Q	0x9c14 /* Q (Quadrature) power value */
+#define	AR5K_PHY_IQRES_CAL_PWR_I	0x9c10	/* I (Inphase) power value */
+#define	AR5K_PHY_IQRES_CAL_PWR_Q	0x9c14	/* Q (Quadrature) power value */
 #define	AR5K_PHY_IQRES_CAL_CORR		0x9c18	/* I/Q Correlation */
 
 /*
  * PHY current RSSI register [5111+]
  */
-#define	AR5K_PHY_CURRENT_RSSI		0x9c1c
+#define	AR5K_PHY_CURRENT_RSSI	0x9c1c
+
+/*
+ * PHY RF Bus grant register (?)
+ */
+#define	AR5K_PHY_RFBUS_GRANT	0x9c20
+
+/*
+ * PHY ADC test register
+ */
+#define	AR5K_PHY_ADC_TEST	0x9c24
+#define	AR5K_PHY_ADC_TEST_I	0x00000001
+#define	AR5K_PHY_ADC_TEST_Q	0x00000200
+
+/*
+ * PHY DAC test register
+ */
+#define	AR5K_PHY_DAC_TEST	0x9c28
+#define	AR5K_PHY_DAC_TEST_I	0x00000001
+#define	AR5K_PHY_DAC_TEST_Q	0x00000200
+
+/*
+ * PHY PTAT register (?)
+ */
+#define	AR5K_PHY_PTAT		0x9c2c
+
+/*
+ * PHY Illegal TX rate register [5112+]
+ */
+#define	AR5K_PHY_BAD_TX_RATE	0x9c30
+
+/*
+ * PHY SPUR Power register [5112+]
+ */
+#define	AR5K_PHY_SPUR_PWR	0x9c34			/* Register Address */
+#define	AR5K_PHY_SPUR_PWR_I	0x00000001	/* SPUR Power estimate for I (field) */
+#define	AR5K_PHY_SPUR_PWR_Q	0x00000100	/* SPUR Power estimate for Q (field) */
+#define	AR5K_PHY_SPUR_PWR_FILT	0x00010000	/* Power with SPUR removed (field) */
+
+/*
+ * PHY Channel status register [5112+] (?)
+ */
+#define	AR5K_PHY_CHAN_STATUS		0x9c38
+#define	AR5K_PHY_CHAN_STATUS_BT_ACT	0x00000001
+#define	AR5K_PHY_CHAN_STATUS_RX_CLR_RAW	0x00000002
+#define	AR5K_PHY_CHAN_STATUS_RX_CLR_MAC	0x00000004
+#define	AR5K_PHY_CHAN_STATUS_RX_CLR_PAP	0x00000008
+
+/*
+ * PHY PAPD I (power?) table (?)
+ * (92! entries)
+ */
+#define	AR5K_PHY_PAPD_I_BASE	0xa000
+#define	AR5K_PHY_PAPD_I(_n)	(AR5K_PHY_PAPD_I_BASE + ((_n) << 2))
 
 /*
  * PHY PCDAC TX power table
  */
 #define	AR5K_PHY_PCDAC_TXPOWER_BASE_5211	0xa180
-#define AR5K_PHY_PCDAC_TXPOWER_BASE_5413	0xa280
-#define AR5K_PHY_PCDAC_TXPOWER_BASE	(ah->ah_radio >= AR5K_RF5413 ? \
-					AR5K_PHY_PCDAC_TXPOWER_BASE_5413 :\
+#define AR5K_PHY_PCDAC_TXPOWER_BASE_2413	0xa280
+#define AR5K_PHY_PCDAC_TXPOWER_BASE	(ah->ah_radio >= AR5K_RF2413 ? \
+					AR5K_PHY_PCDAC_TXPOWER_BASE_2413 :\
 					AR5K_PHY_PCDAC_TXPOWER_BASE_5211)
 #define	AR5K_PHY_PCDAC_TXPOWER(_n)	(AR5K_PHY_PCDAC_TXPOWER_BASE + ((_n) << 2))
 
 /*
  * PHY mode register [5111+]
  */
-#define	AR5K_PHY_MODE			0x0a200		/* Register address */
-#define	AR5K_PHY_MODE_MOD		0x00000001	/* PHY Modulation mask*/
+#define	AR5K_PHY_MODE			0x0a200			/* Register Address */
+#define	AR5K_PHY_MODE_MOD		0x00000001	/* PHY Modulation bit */
 #define AR5K_PHY_MODE_MOD_OFDM		0
 #define AR5K_PHY_MODE_MOD_CCK		1
-#define AR5K_PHY_MODE_FREQ		0x00000002	/* Freq mode mask */
+#define AR5K_PHY_MODE_FREQ		0x00000002	/* Freq mode bit */
 #define	AR5K_PHY_MODE_FREQ_5GHZ		0
 #define	AR5K_PHY_MODE_FREQ_2GHZ		2
-#define AR5K_PHY_MODE_MOD_DYN		0x00000004	/* Dynamic OFDM/CCK mode mask [5112+] */
+#define AR5K_PHY_MODE_MOD_DYN		0x00000004	/* Enable Dynamic OFDM/CCK mode [5112+] */
 #define AR5K_PHY_MODE_RAD		0x00000008	/* [5212+] */
 #define AR5K_PHY_MODE_RAD_RF5111	0
 #define AR5K_PHY_MODE_RAD_RF5112	8
-#define AR5K_PHY_MODE_XR		0x00000010	/* [5112+] */
+#define AR5K_PHY_MODE_XR		0x00000010	/* Enable XR mode [5112+] */
+#define	AR5K_PHY_MODE_HALF_RATE		0x00000020	/* Enable Half rate (test) */
+#define	AR5K_PHY_MODE_QUARTER_RATE	0x00000040	/* Enable Quarter rat (test) */
 
 /*
  * PHY CCK transmit control register [5111+ (?)]
@@ -1979,6 +2426,15 @@ after DFS is enabled */
 #define AR5K_PHY_CCKTXCTL		0xa204
 #define AR5K_PHY_CCKTXCTL_WORLD		0x00000000
 #define AR5K_PHY_CCKTXCTL_JAPAN		0x00000010
+#define	AR5K_PHY_CCKTXCTL_SCRAMBLER_DIS	0x00000001
+#define	AR5K_PHY_CCKTXCTK_DAC_SCALE	0x00000004
+
+/*
+ * PHY CCK Cross-correlator Barker RSSI threshold register [5212+]
+ */
+#define AR5K_PHY_CCK_CROSSCORR			0xa208
+#define AR5K_PHY_CCK_CROSSCORR_WEAK_SIG_THR	0x0000000f
+#define AR5K_PHY_CCK_CROSSCORR_WEAK_SIG_THR_S	0
 
 /*
  * PHY 2GHz gain register [5111+]
diff --git a/drivers/net/wireless/ath9k/Kconfig b/drivers/net/wireless/ath9k/Kconfig
new file mode 100644
index 000000000000..9e19dcceb3a2
--- /dev/null
+++ b/drivers/net/wireless/ath9k/Kconfig
@@ -0,0 +1,8 @@
+config ATH9K
+	tristate "Atheros 802.11n wireless cards support"
+	depends on PCI && MAC80211 && WLAN_80211
+	---help---
+	  This module adds support for wireless adapters based on
+	  Atheros IEEE 802.11n AR5008 and AR9001 family of chipsets.
+
+	  If you choose to build a module, it'll be called ath9k.
diff --git a/drivers/net/wireless/ath9k/Makefile b/drivers/net/wireless/ath9k/Makefile
new file mode 100644
index 000000000000..a6411517e5f8
--- /dev/null
+++ b/drivers/net/wireless/ath9k/Makefile
@@ -0,0 +1,11 @@
+ath9k-y +=	hw.o \
+		phy.o \
+		regd.o \
+		beacon.o \
+		main.o \
+		recv.o \
+		xmit.o \
+		rc.o \
+		core.o
+
+obj-$(CONFIG_ATH9K) += ath9k.o
diff --git a/drivers/net/wireless/ath9k/ath9k.h b/drivers/net/wireless/ath9k/ath9k.h
new file mode 100644
index 000000000000..d1b0fbae5a32
--- /dev/null
+++ b/drivers/net/wireless/ath9k/ath9k.h
@@ -0,0 +1,1021 @@
+/*
+ * Copyright (c) 2008 Atheros Communications Inc.
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#ifndef ATH9K_H
+#define ATH9K_H
+
+#include <linux/io.h>
+
+#define ATHEROS_VENDOR_ID	0x168c
+
+#define AR5416_DEVID_PCI	0x0023
+#define AR5416_DEVID_PCIE	0x0024
+#define AR9160_DEVID_PCI	0x0027
+#define AR9280_DEVID_PCI	0x0029
+#define AR9280_DEVID_PCIE	0x002a
+
+#define AR5416_AR9100_DEVID	0x000b
+
+#define	AR_SUBVENDOR_ID_NOG	0x0e11
+#define AR_SUBVENDOR_ID_NEW_A	0x7065
+
+#define ATH9K_TXERR_XRETRY         0x01
+#define ATH9K_TXERR_FILT           0x02
+#define ATH9K_TXERR_FIFO           0x04
+#define ATH9K_TXERR_XTXOP          0x08
+#define ATH9K_TXERR_TIMER_EXPIRED  0x10
+
+#define ATH9K_TX_BA                0x01
+#define ATH9K_TX_PWRMGMT           0x02
+#define ATH9K_TX_DESC_CFG_ERR      0x04
+#define ATH9K_TX_DATA_UNDERRUN     0x08
+#define ATH9K_TX_DELIM_UNDERRUN    0x10
+#define ATH9K_TX_SW_ABORTED        0x40
+#define ATH9K_TX_SW_FILTERED       0x80
+
+#define NBBY    8
+
+struct ath_tx_status {
+	u32 ts_tstamp;
+	u16 ts_seqnum;
+	u8 ts_status;
+	u8 ts_ratecode;
+	u8 ts_rateindex;
+	int8_t ts_rssi;
+	u8 ts_shortretry;
+	u8 ts_longretry;
+	u8 ts_virtcol;
+	u8 ts_antenna;
+	u8 ts_flags;
+	int8_t ts_rssi_ctl0;
+	int8_t ts_rssi_ctl1;
+	int8_t ts_rssi_ctl2;
+	int8_t ts_rssi_ext0;
+	int8_t ts_rssi_ext1;
+	int8_t ts_rssi_ext2;
+	u8 pad[3];
+	u32 ba_low;
+	u32 ba_high;
+	u32 evm0;
+	u32 evm1;
+	u32 evm2;
+};
+
+struct ath_rx_status {
+	u32 rs_tstamp;
+	u16 rs_datalen;
+	u8 rs_status;
+	u8 rs_phyerr;
+	int8_t rs_rssi;
+	u8 rs_keyix;
+	u8 rs_rate;
+	u8 rs_antenna;
+	u8 rs_more;
+	int8_t rs_rssi_ctl0;
+	int8_t rs_rssi_ctl1;
+	int8_t rs_rssi_ctl2;
+	int8_t rs_rssi_ext0;
+	int8_t rs_rssi_ext1;
+	int8_t rs_rssi_ext2;
+	u8 rs_isaggr;
+	u8 rs_moreaggr;
+	u8 rs_num_delims;
+	u8 rs_flags;
+	u32 evm0;
+	u32 evm1;
+	u32 evm2;
+};
+
+#define ATH9K_RXERR_CRC           0x01
+#define ATH9K_RXERR_PHY           0x02
+#define ATH9K_RXERR_FIFO          0x04
+#define ATH9K_RXERR_DECRYPT       0x08
+#define ATH9K_RXERR_MIC           0x10
+
+#define ATH9K_RX_MORE             0x01
+#define ATH9K_RX_MORE_AGGR        0x02
+#define ATH9K_RX_GI               0x04
+#define ATH9K_RX_2040             0x08
+#define ATH9K_RX_DELIM_CRC_PRE    0x10
+#define ATH9K_RX_DELIM_CRC_POST   0x20
+#define ATH9K_RX_DECRYPT_BUSY     0x40
+
+#define ATH9K_RXKEYIX_INVALID	((u8)-1)
+#define ATH9K_TXKEYIX_INVALID	((u32)-1)
+
+struct ath_desc {
+	u32 ds_link;
+	u32 ds_data;
+	u32 ds_ctl0;
+	u32 ds_ctl1;
+	u32 ds_hw[20];
+	union {
+		struct ath_tx_status tx;
+		struct ath_rx_status rx;
+		void *stats;
+	} ds_us;
+	void *ds_vdata;
+} __packed;
+
+#define	ds_txstat	ds_us.tx
+#define	ds_rxstat	ds_us.rx
+#define ds_stat		ds_us.stats
+
+#define ATH9K_TXDESC_CLRDMASK		0x0001
+#define ATH9K_TXDESC_NOACK		0x0002
+#define ATH9K_TXDESC_RTSENA		0x0004
+#define ATH9K_TXDESC_CTSENA		0x0008
+#define ATH9K_TXDESC_INTREQ		0x0010
+#define ATH9K_TXDESC_VEOL		0x0020
+#define ATH9K_TXDESC_EXT_ONLY		0x0040
+#define ATH9K_TXDESC_EXT_AND_CTL	0x0080
+#define ATH9K_TXDESC_VMF		0x0100
+#define ATH9K_TXDESC_FRAG_IS_ON 	0x0200
+
+#define ATH9K_RXDESC_INTREQ		0x0020
+
+enum wireless_mode {
+	ATH9K_MODE_11A = 0,
+	ATH9K_MODE_11B = 2,
+	ATH9K_MODE_11G = 3,
+	ATH9K_MODE_11NA_HT20 = 6,
+	ATH9K_MODE_11NG_HT20 = 7,
+	ATH9K_MODE_11NA_HT40PLUS = 8,
+	ATH9K_MODE_11NA_HT40MINUS = 9,
+	ATH9K_MODE_11NG_HT40PLUS = 10,
+	ATH9K_MODE_11NG_HT40MINUS = 11,
+	ATH9K_MODE_MAX
+};
+
+enum ath9k_hw_caps {
+	ATH9K_HW_CAP_CHAN_SPREAD		= BIT(0),
+	ATH9K_HW_CAP_MIC_AESCCM                 = BIT(1),
+	ATH9K_HW_CAP_MIC_CKIP                   = BIT(2),
+	ATH9K_HW_CAP_MIC_TKIP                   = BIT(3),
+	ATH9K_HW_CAP_CIPHER_AESCCM              = BIT(4),
+	ATH9K_HW_CAP_CIPHER_CKIP                = BIT(5),
+	ATH9K_HW_CAP_CIPHER_TKIP                = BIT(6),
+	ATH9K_HW_CAP_VEOL                       = BIT(7),
+	ATH9K_HW_CAP_BSSIDMASK                  = BIT(8),
+	ATH9K_HW_CAP_MCAST_KEYSEARCH            = BIT(9),
+	ATH9K_HW_CAP_CHAN_HALFRATE              = BIT(10),
+	ATH9K_HW_CAP_CHAN_QUARTERRATE           = BIT(11),
+	ATH9K_HW_CAP_HT                         = BIT(12),
+	ATH9K_HW_CAP_GTT                        = BIT(13),
+	ATH9K_HW_CAP_FASTCC                     = BIT(14),
+	ATH9K_HW_CAP_RFSILENT                   = BIT(15),
+	ATH9K_HW_CAP_WOW                        = BIT(16),
+	ATH9K_HW_CAP_CST                        = BIT(17),
+	ATH9K_HW_CAP_ENHANCEDPM                 = BIT(18),
+	ATH9K_HW_CAP_AUTOSLEEP                  = BIT(19),
+	ATH9K_HW_CAP_4KB_SPLITTRANS             = BIT(20),
+	ATH9K_HW_CAP_WOW_MATCHPATTERN_EXACT     = BIT(21),
+};
+
+enum ath9k_capability_type {
+	ATH9K_CAP_CIPHER = 0,
+	ATH9K_CAP_TKIP_MIC,
+	ATH9K_CAP_TKIP_SPLIT,
+	ATH9K_CAP_PHYCOUNTERS,
+	ATH9K_CAP_DIVERSITY,
+	ATH9K_CAP_TXPOW,
+	ATH9K_CAP_PHYDIAG,
+	ATH9K_CAP_MCAST_KEYSRCH,
+	ATH9K_CAP_TSF_ADJUST,
+	ATH9K_CAP_WME_TKIPMIC,
+	ATH9K_CAP_RFSILENT,
+	ATH9K_CAP_ANT_CFG_2GHZ,
+	ATH9K_CAP_ANT_CFG_5GHZ
+};
+
+struct ath9k_hw_capabilities {
+	u32 hw_caps; /* ATH9K_HW_CAP_* from ath9k_hw_caps */
+	DECLARE_BITMAP(wireless_modes, ATH9K_MODE_MAX); /* ATH9K_MODE_* */
+	u16 total_queues;
+	u16 keycache_size;
+	u16 low_5ghz_chan, high_5ghz_chan;
+	u16 low_2ghz_chan, high_2ghz_chan;
+	u16 num_mr_retries;
+	u16 rts_aggr_limit;
+	u8 tx_chainmask;
+	u8 rx_chainmask;
+	u16 tx_triglevel_max;
+	u16 reg_cap;
+	u8 num_gpio_pins;
+	u8 num_antcfg_2ghz;
+	u8 num_antcfg_5ghz;
+};
+
+struct ath9k_ops_config {
+	int dma_beacon_response_time;
+	int sw_beacon_response_time;
+	int additional_swba_backoff;
+	int ack_6mb;
+	int cwm_ignore_extcca;
+	u8 pcie_powersave_enable;
+	u8 pcie_l1skp_enable;
+	u8 pcie_clock_req;
+	u32 pcie_waen;
+	int pcie_power_reset;
+	u8 pcie_restore;
+	u8 analog_shiftreg;
+	u8 ht_enable;
+	u32 ofdm_trig_low;
+	u32 ofdm_trig_high;
+	u32 cck_trig_high;
+	u32 cck_trig_low;
+	u32 enable_ani;
+	u8 noise_immunity_level;
+	u32 ofdm_weaksignal_det;
+	u32 cck_weaksignal_thr;
+	u8 spur_immunity_level;
+	u8 firstep_level;
+	int8_t rssi_thr_high;
+	int8_t rssi_thr_low;
+	u16 diversity_control;
+	u16 antenna_switch_swap;
+	int serialize_regmode;
+	int intr_mitigation;
+#define SPUR_DISABLE        	0
+#define SPUR_ENABLE_IOCTL   	1
+#define SPUR_ENABLE_EEPROM  	2
+#define AR_EEPROM_MODAL_SPURS   5
+#define AR_SPUR_5413_1      	1640
+#define AR_SPUR_5413_2      	1200
+#define AR_NO_SPUR      	0x8000
+#define AR_BASE_FREQ_2GHZ   	2300
+#define AR_BASE_FREQ_5GHZ   	4900
+#define AR_SPUR_FEEQ_BOUND_HT40 19
+#define AR_SPUR_FEEQ_BOUND_HT20 10
+	int spurmode;
+	u16 spurchans[AR_EEPROM_MODAL_SPURS][2];
+};
+
+enum ath9k_tx_queue {
+	ATH9K_TX_QUEUE_INACTIVE = 0,
+	ATH9K_TX_QUEUE_DATA,
+	ATH9K_TX_QUEUE_BEACON,
+	ATH9K_TX_QUEUE_CAB,
+	ATH9K_TX_QUEUE_UAPSD,
+	ATH9K_TX_QUEUE_PSPOLL
+};
+
+#define	ATH9K_NUM_TX_QUEUES 10
+
+enum ath9k_tx_queue_subtype {
+	ATH9K_WME_AC_BK = 0,
+	ATH9K_WME_AC_BE,
+	ATH9K_WME_AC_VI,
+	ATH9K_WME_AC_VO,
+	ATH9K_WME_UPSD
+};
+
+enum ath9k_tx_queue_flags {
+	TXQ_FLAG_TXOKINT_ENABLE = 0x0001,
+	TXQ_FLAG_TXERRINT_ENABLE = 0x0001,
+	TXQ_FLAG_TXDESCINT_ENABLE = 0x0002,
+	TXQ_FLAG_TXEOLINT_ENABLE = 0x0004,
+	TXQ_FLAG_TXURNINT_ENABLE = 0x0008,
+	TXQ_FLAG_BACKOFF_DISABLE = 0x0010,
+	TXQ_FLAG_COMPRESSION_ENABLE = 0x0020,
+	TXQ_FLAG_RDYTIME_EXP_POLICY_ENABLE = 0x0040,
+	TXQ_FLAG_FRAG_BURST_BACKOFF_ENABLE = 0x0080,
+};
+
+#define ATH9K_TXQ_USEDEFAULT ((u32) -1)
+
+#define ATH9K_DECOMP_MASK_SIZE     128
+#define ATH9K_READY_TIME_LO_BOUND  50
+#define ATH9K_READY_TIME_HI_BOUND  96
+
+enum ath9k_pkt_type {
+	ATH9K_PKT_TYPE_NORMAL = 0,
+	ATH9K_PKT_TYPE_ATIM,
+	ATH9K_PKT_TYPE_PSPOLL,
+	ATH9K_PKT_TYPE_BEACON,
+	ATH9K_PKT_TYPE_PROBE_RESP,
+	ATH9K_PKT_TYPE_CHIRP,
+	ATH9K_PKT_TYPE_GRP_POLL,
+};
+
+struct ath9k_tx_queue_info {
+	u32 tqi_ver;
+	enum ath9k_tx_queue tqi_type;
+	enum ath9k_tx_queue_subtype tqi_subtype;
+	enum ath9k_tx_queue_flags tqi_qflags;
+	u32 tqi_priority;
+	u32 tqi_aifs;
+	u32 tqi_cwmin;
+	u32 tqi_cwmax;
+	u16 tqi_shretry;
+	u16 tqi_lgretry;
+	u32 tqi_cbrPeriod;
+	u32 tqi_cbrOverflowLimit;
+	u32 tqi_burstTime;
+	u32 tqi_readyTime;
+	u32 tqi_physCompBuf;
+	u32 tqi_intFlags;
+};
+
+enum ath9k_rx_filter {
+	ATH9K_RX_FILTER_UCAST = 0x00000001,
+	ATH9K_RX_FILTER_MCAST = 0x00000002,
+	ATH9K_RX_FILTER_BCAST = 0x00000004,
+	ATH9K_RX_FILTER_CONTROL = 0x00000008,
+	ATH9K_RX_FILTER_BEACON = 0x00000010,
+	ATH9K_RX_FILTER_PROM = 0x00000020,
+	ATH9K_RX_FILTER_PROBEREQ = 0x00000080,
+	ATH9K_RX_FILTER_PSPOLL = 0x00004000,
+	ATH9K_RX_FILTER_PHYERR = 0x00000100,
+	ATH9K_RX_FILTER_PHYRADAR = 0x00002000,
+};
+
+enum ath9k_int {
+	ATH9K_INT_RX = 0x00000001,
+	ATH9K_INT_RXDESC = 0x00000002,
+	ATH9K_INT_RXNOFRM = 0x00000008,
+	ATH9K_INT_RXEOL = 0x00000010,
+	ATH9K_INT_RXORN = 0x00000020,
+	ATH9K_INT_TX = 0x00000040,
+	ATH9K_INT_TXDESC = 0x00000080,
+	ATH9K_INT_TIM_TIMER = 0x00000100,
+	ATH9K_INT_TXURN = 0x00000800,
+	ATH9K_INT_MIB = 0x00001000,
+	ATH9K_INT_RXPHY = 0x00004000,
+	ATH9K_INT_RXKCM = 0x00008000,
+	ATH9K_INT_SWBA = 0x00010000,
+	ATH9K_INT_BMISS = 0x00040000,
+	ATH9K_INT_BNR = 0x00100000,
+	ATH9K_INT_TIM = 0x00200000,
+	ATH9K_INT_DTIM = 0x00400000,
+	ATH9K_INT_DTIMSYNC = 0x00800000,
+	ATH9K_INT_GPIO = 0x01000000,
+	ATH9K_INT_CABEND = 0x02000000,
+	ATH9K_INT_CST = 0x10000000,
+	ATH9K_INT_GTT = 0x20000000,
+	ATH9K_INT_FATAL = 0x40000000,
+	ATH9K_INT_GLOBAL = 0x80000000,
+	ATH9K_INT_BMISC = ATH9K_INT_TIM |
+		ATH9K_INT_DTIM |
+		ATH9K_INT_DTIMSYNC |
+		ATH9K_INT_CABEND,
+	ATH9K_INT_COMMON = ATH9K_INT_RXNOFRM |
+		ATH9K_INT_RXDESC |
+		ATH9K_INT_RXEOL |
+		ATH9K_INT_RXORN |
+		ATH9K_INT_TXURN |
+		ATH9K_INT_TXDESC |
+		ATH9K_INT_MIB |
+		ATH9K_INT_RXPHY |
+		ATH9K_INT_RXKCM |
+		ATH9K_INT_SWBA |
+		ATH9K_INT_BMISS |
+		ATH9K_INT_GPIO,
+	ATH9K_INT_NOCARD = 0xffffffff
+};
+
+struct ath9k_rate_table {
+	int rateCount;
+	u8 rateCodeToIndex[256];
+	struct {
+		u8 valid;
+		u8 phy;
+		u32 rateKbps;
+		u8 rateCode;
+		u8 shortPreamble;
+		u8 dot11Rate;
+		u8 controlRate;
+		u16 lpAckDuration;
+		u16 spAckDuration;
+	} info[32];
+};
+
+#define ATH9K_RATESERIES_RTS_CTS  0x0001
+#define ATH9K_RATESERIES_2040     0x0002
+#define ATH9K_RATESERIES_HALFGI   0x0004
+
+struct ath9k_11n_rate_series {
+	u32 Tries;
+	u32 Rate;
+	u32 PktDuration;
+	u32 ChSel;
+	u32 RateFlags;
+};
+
+#define CHANNEL_CW_INT    0x00002
+#define CHANNEL_CCK       0x00020
+#define CHANNEL_OFDM      0x00040
+#define CHANNEL_2GHZ      0x00080
+#define CHANNEL_5GHZ      0x00100
+#define CHANNEL_PASSIVE   0x00200
+#define CHANNEL_DYN       0x00400
+#define CHANNEL_HALF      0x04000
+#define CHANNEL_QUARTER   0x08000
+#define CHANNEL_HT20      0x10000
+#define CHANNEL_HT40PLUS  0x20000
+#define CHANNEL_HT40MINUS 0x40000
+
+#define CHANNEL_INTERFERENCE    0x01
+#define CHANNEL_DFS             0x02
+#define CHANNEL_4MS_LIMIT       0x04
+#define CHANNEL_DFS_CLEAR       0x08
+#define CHANNEL_DISALLOW_ADHOC  0x10
+#define CHANNEL_PER_11D_ADHOC   0x20
+
+#define CHANNEL_A           (CHANNEL_5GHZ|CHANNEL_OFDM)
+#define CHANNEL_B           (CHANNEL_2GHZ|CHANNEL_CCK)
+#define CHANNEL_G           (CHANNEL_2GHZ|CHANNEL_OFDM)
+#define CHANNEL_G_HT20      (CHANNEL_2GHZ|CHANNEL_HT20)
+#define CHANNEL_A_HT20      (CHANNEL_5GHZ|CHANNEL_HT20)
+#define CHANNEL_G_HT40PLUS  (CHANNEL_2GHZ|CHANNEL_HT40PLUS)
+#define CHANNEL_G_HT40MINUS (CHANNEL_2GHZ|CHANNEL_HT40MINUS)
+#define CHANNEL_A_HT40PLUS  (CHANNEL_5GHZ|CHANNEL_HT40PLUS)
+#define CHANNEL_A_HT40MINUS (CHANNEL_5GHZ|CHANNEL_HT40MINUS)
+#define CHANNEL_ALL				\
+	(CHANNEL_OFDM|				\
+	 CHANNEL_CCK|				\
+	 CHANNEL_2GHZ |				\
+	 CHANNEL_5GHZ |				\
+	 CHANNEL_HT20 |				\
+	 CHANNEL_HT40PLUS |			\
+	 CHANNEL_HT40MINUS)
+
+struct ath9k_channel {
+	u16 channel;
+	u32 channelFlags;
+	u8 privFlags;
+	int8_t maxRegTxPower;
+	int8_t maxTxPower;
+	int8_t minTxPower;
+	u32 chanmode;
+	int32_t CalValid;
+	bool oneTimeCalsDone;
+	int8_t iCoff;
+	int8_t qCoff;
+	int16_t rawNoiseFloor;
+	int8_t antennaMax;
+	u32 regDmnFlags;
+	u32 conformanceTestLimit[3]; /* 0:11a, 1: 11b, 2:11g */
+#ifdef ATH_NF_PER_CHAN
+	struct ath9k_nfcal_hist nfCalHist[NUM_NF_READINGS];
+#endif
+};
+
+#define IS_CHAN_A(_c) ((((_c)->channelFlags & CHANNEL_A) == CHANNEL_A) || \
+       (((_c)->channelFlags & CHANNEL_A_HT20) == CHANNEL_A_HT20) || \
+       (((_c)->channelFlags & CHANNEL_A_HT40PLUS) == CHANNEL_A_HT40PLUS) || \
+       (((_c)->channelFlags & CHANNEL_A_HT40MINUS) == CHANNEL_A_HT40MINUS))
+#define IS_CHAN_B(_c) (((_c)->channelFlags & CHANNEL_B) == CHANNEL_B)
+#define IS_CHAN_G(_c) ((((_c)->channelFlags & (CHANNEL_G)) == CHANNEL_G) || \
+       (((_c)->channelFlags & CHANNEL_G_HT20) == CHANNEL_G_HT20) || \
+       (((_c)->channelFlags & CHANNEL_G_HT40PLUS) == CHANNEL_G_HT40PLUS) || \
+       (((_c)->channelFlags & CHANNEL_G_HT40MINUS) == CHANNEL_G_HT40MINUS))
+#define IS_CHAN_CCK(_c) (((_c)->channelFlags & CHANNEL_CCK) != 0)
+#define IS_CHAN_OFDM(_c) (((_c)->channelFlags & CHANNEL_OFDM) != 0)
+#define IS_CHAN_5GHZ(_c) (((_c)->channelFlags & CHANNEL_5GHZ) != 0)
+#define IS_CHAN_2GHZ(_c) (((_c)->channelFlags & CHANNEL_2GHZ) != 0)
+#define IS_CHAN_PASSIVE(_c) (((_c)->channelFlags & CHANNEL_PASSIVE) != 0)
+#define IS_CHAN_HALF_RATE(_c) (((_c)->channelFlags & CHANNEL_HALF) != 0)
+#define IS_CHAN_QUARTER_RATE(_c) (((_c)->channelFlags & CHANNEL_QUARTER) != 0)
+
+/* These macros check chanmode and not channelFlags */
+#define IS_CHAN_HT20(_c) (((_c)->chanmode == CHANNEL_A_HT20) ||	\
+			  ((_c)->chanmode == CHANNEL_G_HT20))
+#define IS_CHAN_HT40(_c) (((_c)->chanmode == CHANNEL_A_HT40PLUS) ||	\
+			  ((_c)->chanmode == CHANNEL_A_HT40MINUS) ||	\
+			  ((_c)->chanmode == CHANNEL_G_HT40PLUS) ||	\
+			  ((_c)->chanmode == CHANNEL_G_HT40MINUS))
+#define IS_CHAN_HT(_c) (IS_CHAN_HT20((_c)) || IS_CHAN_HT40((_c)))
+
+#define IS_CHAN_IN_PUBLIC_SAFETY_BAND(_c) ((_c) > 4940 && (_c) < 4990)
+#define IS_CHAN_A_5MHZ_SPACED(_c)			\
+	((((_c)->channelFlags & CHANNEL_5GHZ) != 0) &&	\
+	 (((_c)->channel % 20) != 0) &&			\
+	 (((_c)->channel % 10) != 0))
+
+struct ath9k_keyval {
+	u8 kv_type;
+	u8 kv_pad;
+	u16 kv_len;
+	u8 kv_val[16];
+	u8 kv_mic[8];
+	u8 kv_txmic[8];
+};
+
+enum ath9k_key_type {
+	ATH9K_KEY_TYPE_CLEAR,
+	ATH9K_KEY_TYPE_WEP,
+	ATH9K_KEY_TYPE_AES,
+	ATH9K_KEY_TYPE_TKIP,
+};
+
+enum ath9k_cipher {
+	ATH9K_CIPHER_WEP = 0,
+	ATH9K_CIPHER_AES_OCB = 1,
+	ATH9K_CIPHER_AES_CCM = 2,
+	ATH9K_CIPHER_CKIP = 3,
+	ATH9K_CIPHER_TKIP = 4,
+	ATH9K_CIPHER_CLR = 5,
+	ATH9K_CIPHER_MIC = 127
+};
+
+#define AR_EEPROM_EEPCAP_COMPRESS_DIS   0x0001
+#define AR_EEPROM_EEPCAP_AES_DIS        0x0002
+#define AR_EEPROM_EEPCAP_FASTFRAME_DIS  0x0004
+#define AR_EEPROM_EEPCAP_BURST_DIS      0x0008
+#define AR_EEPROM_EEPCAP_MAXQCU         0x01F0
+#define AR_EEPROM_EEPCAP_MAXQCU_S       4
+#define AR_EEPROM_EEPCAP_HEAVY_CLIP_EN  0x0200
+#define AR_EEPROM_EEPCAP_KC_ENTRIES     0xF000
+#define AR_EEPROM_EEPCAP_KC_ENTRIES_S   12
+
+#define AR_EEPROM_EEREGCAP_EN_FCC_MIDBAND   0x0040
+#define AR_EEPROM_EEREGCAP_EN_KK_U1_EVEN    0x0080
+#define AR_EEPROM_EEREGCAP_EN_KK_U2         0x0100
+#define AR_EEPROM_EEREGCAP_EN_KK_MIDBAND    0x0200
+#define AR_EEPROM_EEREGCAP_EN_KK_U1_ODD     0x0400
+#define AR_EEPROM_EEREGCAP_EN_KK_NEW_11A    0x0800
+
+#define AR_EEPROM_EEREGCAP_EN_KK_U1_ODD_PRE4_0  0x4000
+#define AR_EEPROM_EEREGCAP_EN_KK_NEW_11A_PRE4_0 0x8000
+
+#define SD_NO_CTL               0xE0
+#define NO_CTL                  0xff
+#define CTL_MODE_M              7
+#define CTL_11A                 0
+#define CTL_11B                 1
+#define CTL_11G                 2
+#define CTL_2GHT20              5
+#define CTL_5GHT20              6
+#define CTL_2GHT40              7
+#define CTL_5GHT40              8
+
+#define AR_EEPROM_MAC(i)        (0x1d+(i))
+#define EEP_SCALE       100
+#define EEP_DELTA       10
+
+#define AR_EEPROM_RFSILENT_GPIO_SEL     0x001c
+#define AR_EEPROM_RFSILENT_GPIO_SEL_S   2
+#define AR_EEPROM_RFSILENT_POLARITY     0x0002
+#define AR_EEPROM_RFSILENT_POLARITY_S   1
+
+#define CTRY_DEBUG 0x1ff
+#define	CTRY_DEFAULT 0
+
+enum reg_ext_bitmap {
+	REG_EXT_JAPAN_MIDBAND = 1,
+	REG_EXT_FCC_DFS_HT40 = 2,
+	REG_EXT_JAPAN_NONDFS_HT40 = 3,
+	REG_EXT_JAPAN_DFS_HT40 = 4
+};
+
+struct ath9k_country_entry {
+	u16 countryCode;
+	u16 regDmnEnum;
+	u16 regDmn5G;
+	u16 regDmn2G;
+	u8 isMultidomain;
+	u8 iso[3];
+};
+
+#define REG_WRITE(_ah, _reg, _val) iowrite32(_val, _ah->ah_sh + _reg)
+#define REG_READ(_ah, _reg) ioread32(_ah->ah_sh + _reg)
+
+#define SM(_v, _f)  (((_v) << _f##_S) & _f)
+#define MS(_v, _f)  (((_v) & _f) >> _f##_S)
+#define REG_RMW(_a, _r, _set, _clr)    \
+	REG_WRITE(_a, _r, (REG_READ(_a, _r) & ~(_clr)) | (_set))
+#define REG_RMW_FIELD(_a, _r, _f, _v) \
+	REG_WRITE(_a, _r, \
+	(REG_READ(_a, _r) & ~_f) | (((_v) << _f##_S) & _f))
+#define REG_SET_BIT(_a, _r, _f) \
+	REG_WRITE(_a, _r, REG_READ(_a, _r) | _f)
+#define REG_CLR_BIT(_a, _r, _f) \
+	REG_WRITE(_a, _r, REG_READ(_a, _r) & ~_f)
+
+#define ATH9K_COMP_BUF_MAX_SIZE   9216
+#define ATH9K_COMP_BUF_ALIGN_SIZE 512
+
+#define ATH9K_TXQ_USE_LOCKOUT_BKOFF_DIS   0x00000001
+
+#define INIT_AIFS       2
+#define INIT_CWMIN      15
+#define INIT_CWMIN_11B  31
+#define INIT_CWMAX      1023
+#define INIT_SH_RETRY   10
+#define INIT_LG_RETRY   10
+#define INIT_SSH_RETRY  32
+#define INIT_SLG_RETRY  32
+
+#define WLAN_CTRL_FRAME_SIZE (2+2+6+4)
+
+#define ATH_AMPDU_LIMIT_MAX      (64 * 1024 - 1)
+#define ATH_AMPDU_LIMIT_DEFAULT  ATH_AMPDU_LIMIT_MAX
+
+#define IEEE80211_WEP_IVLEN      3
+#define IEEE80211_WEP_KIDLEN     1
+#define IEEE80211_WEP_CRCLEN     4
+#define IEEE80211_MAX_MPDU_LEN  (3840 + FCS_LEN +		\
+				 (IEEE80211_WEP_IVLEN +		\
+				  IEEE80211_WEP_KIDLEN +	\
+				  IEEE80211_WEP_CRCLEN))
+#define IEEE80211_MAX_LEN       (2300 + FCS_LEN +		\
+				 (IEEE80211_WEP_IVLEN +		\
+				  IEEE80211_WEP_KIDLEN +	\
+				  IEEE80211_WEP_CRCLEN))
+
+#define MAX_REG_ADD_COUNT   129
+#define MAX_RATE_POWER 63
+
+enum ath9k_power_mode {
+	ATH9K_PM_AWAKE = 0,
+	ATH9K_PM_FULL_SLEEP,
+	ATH9K_PM_NETWORK_SLEEP,
+	ATH9K_PM_UNDEFINED
+};
+
+struct ath9k_mib_stats {
+	u32 ackrcv_bad;
+	u32 rts_bad;
+	u32 rts_good;
+	u32 fcs_bad;
+	u32 beacons;
+};
+
+enum ath9k_ant_setting {
+	ATH9K_ANT_VARIABLE = 0,
+	ATH9K_ANT_FIXED_A,
+	ATH9K_ANT_FIXED_B
+};
+
+enum ath9k_opmode {
+	ATH9K_M_STA = 1,
+	ATH9K_M_IBSS = 0,
+	ATH9K_M_HOSTAP = 6,
+	ATH9K_M_MONITOR = 8
+};
+
+#define ATH9K_SLOT_TIME_6 6
+#define ATH9K_SLOT_TIME_9 9
+#define ATH9K_SLOT_TIME_20 20
+
+enum ath9k_ht_macmode {
+	ATH9K_HT_MACMODE_20 = 0,
+	ATH9K_HT_MACMODE_2040 = 1,
+};
+
+enum ath9k_ht_extprotspacing {
+	ATH9K_HT_EXTPROTSPACING_20 = 0,
+	ATH9K_HT_EXTPROTSPACING_25 = 1,
+};
+
+struct ath9k_ht_cwm {
+	enum ath9k_ht_macmode ht_macmode;
+	enum ath9k_ht_extprotspacing ht_extprotspacing;
+};
+
+enum ath9k_ani_cmd {
+	ATH9K_ANI_PRESENT = 0x1,
+	ATH9K_ANI_NOISE_IMMUNITY_LEVEL = 0x2,
+	ATH9K_ANI_OFDM_WEAK_SIGNAL_DETECTION = 0x4,
+	ATH9K_ANI_CCK_WEAK_SIGNAL_THR = 0x8,
+	ATH9K_ANI_FIRSTEP_LEVEL = 0x10,
+	ATH9K_ANI_SPUR_IMMUNITY_LEVEL = 0x20,
+	ATH9K_ANI_MODE = 0x40,
+	ATH9K_ANI_PHYERR_RESET = 0x80,
+	ATH9K_ANI_ALL = 0xff
+};
+
+enum phytype {
+	PHY_DS,
+	PHY_FH,
+	PHY_OFDM,
+	PHY_HT,
+};
+#define PHY_CCK PHY_DS
+
+enum start_adhoc_option {
+	START_ADHOC_NO_11A,
+	START_ADHOC_PER_11D,
+	START_ADHOC_IN_11A,
+	START_ADHOC_IN_11B,
+};
+
+enum ath9k_tp_scale {
+	ATH9K_TP_SCALE_MAX = 0,
+	ATH9K_TP_SCALE_50,
+	ATH9K_TP_SCALE_25,
+	ATH9K_TP_SCALE_12,
+	ATH9K_TP_SCALE_MIN
+};
+
+enum ser_reg_mode {
+	SER_REG_MODE_OFF = 0,
+	SER_REG_MODE_ON = 1,
+	SER_REG_MODE_AUTO = 2,
+};
+
+#define AR_PHY_CCA_MAX_GOOD_VALUE      		-85
+#define AR_PHY_CCA_MAX_HIGH_VALUE      		-62
+#define AR_PHY_CCA_MIN_BAD_VALUE       		-121
+#define AR_PHY_CCA_FILTERWINDOW_LENGTH_INIT     3
+#define AR_PHY_CCA_FILTERWINDOW_LENGTH          5
+
+#define ATH9K_NF_CAL_HIST_MAX           5
+#define NUM_NF_READINGS                 6
+
+struct ath9k_nfcal_hist {
+	int16_t nfCalBuffer[ATH9K_NF_CAL_HIST_MAX];
+	u8 currIndex;
+	int16_t privNF;
+	u8 invalidNFcount;
+};
+
+struct ath9k_beacon_state {
+	u32 bs_nexttbtt;
+	u32 bs_nextdtim;
+	u32 bs_intval;
+#define ATH9K_BEACON_PERIOD       0x0000ffff
+#define ATH9K_BEACON_ENA          0x00800000
+#define ATH9K_BEACON_RESET_TSF    0x01000000
+	u32 bs_dtimperiod;
+	u16 bs_cfpperiod;
+	u16 bs_cfpmaxduration;
+	u32 bs_cfpnext;
+	u16 bs_timoffset;
+	u16 bs_bmissthreshold;
+	u32 bs_sleepduration;
+};
+
+struct ath9k_node_stats {
+	u32 ns_avgbrssi;
+	u32 ns_avgrssi;
+	u32 ns_avgtxrssi;
+	u32 ns_avgtxrate;
+};
+
+#define ATH9K_RSSI_EP_MULTIPLIER  (1<<7)
+
+enum ath9k_gpio_output_mux_type {
+	ATH9K_GPIO_OUTPUT_MUX_AS_OUTPUT,
+	ATH9K_GPIO_OUTPUT_MUX_AS_PCIE_ATTENTION_LED,
+	ATH9K_GPIO_OUTPUT_MUX_AS_PCIE_POWER_LED,
+	ATH9K_GPIO_OUTPUT_MUX_AS_MAC_NETWORK_LED,
+	ATH9K_GPIO_OUTPUT_MUX_AS_MAC_POWER_LED,
+	ATH9K_GPIO_OUTPUT_MUX_NUM_ENTRIES
+};
+
+enum {
+	ATH9K_RESET_POWER_ON,
+	ATH9K_RESET_WARM,
+	ATH9K_RESET_COLD,
+};
+
+#define AH_USE_EEPROM   0x1
+
+struct ath_hal {
+	u32 ah_magic;
+	u16 ah_devid;
+	u16 ah_subvendorid;
+	struct ath_softc *ah_sc;
+	void __iomem *ah_sh;
+	u16 ah_countryCode;
+	u32 ah_macVersion;
+	u16 ah_macRev;
+	u16 ah_phyRev;
+	u16 ah_analog5GhzRev;
+	u16 ah_analog2GhzRev;
+	u8 ah_decompMask[ATH9K_DECOMP_MASK_SIZE];
+	u32 ah_flags;
+	enum ath9k_opmode ah_opmode;
+	struct ath9k_ops_config ah_config;
+	struct ath9k_hw_capabilities ah_caps;
+	int16_t ah_powerLimit;
+	u16 ah_maxPowerLevel;
+	u32 ah_tpScale;
+	u16 ah_currentRD;
+	u16 ah_currentRDExt;
+	u16 ah_currentRDInUse;
+	u16 ah_currentRD5G;
+	u16 ah_currentRD2G;
+	char ah_iso[4];
+	enum start_adhoc_option ah_adHocMode;
+	bool ah_commonMode;
+	struct ath9k_channel ah_channels[150];
+	u32 ah_nchan;
+	struct ath9k_channel *ah_curchan;
+	u16 ah_rfsilent;
+	bool ah_rfkillEnabled;
+	bool ah_isPciExpress;
+	u16 ah_txTrigLevel;
+#ifndef ATH_NF_PER_CHAN
+	struct ath9k_nfcal_hist nfCalHist[NUM_NF_READINGS];
+#endif
+};
+
+struct chan_centers {
+	u16 synth_center;
+	u16 ctl_center;
+	u16 ext_center;
+};
+
+int ath_hal_getcapability(struct ath_hal *ah,
+			  enum ath9k_capability_type type,
+			  u32 capability,
+			  u32 *result);
+const struct ath9k_rate_table *ath9k_hw_getratetable(struct ath_hal *ah,
+						     u32 mode);
+void ath9k_hw_detach(struct ath_hal *ah);
+struct ath_hal *ath9k_hw_attach(u16 devid,
+				struct ath_softc *sc,
+				void __iomem *mem,
+				int *error);
+bool ath9k_regd_init_channels(struct ath_hal *ah,
+			      u32 maxchans, u32 *nchans,
+			      u8 *regclassids,
+			      u32 maxregids, u32 *nregids,
+			      u16 cc,
+			      bool enableOutdoor,
+			      bool enableExtendedChannels);
+u32 ath9k_hw_mhz2ieee(struct ath_hal *ah, u32 freq, u32 flags);
+enum ath9k_int ath9k_hw_set_interrupts(struct ath_hal *ah,
+				     enum ath9k_int ints);
+bool ath9k_hw_reset(struct ath_hal *ah, enum ath9k_opmode opmode,
+		    struct ath9k_channel *chan,
+		    enum ath9k_ht_macmode macmode,
+		    u8 txchainmask, u8 rxchainmask,
+		    enum ath9k_ht_extprotspacing extprotspacing,
+		    bool bChannelChange,
+		    int *status);
+bool ath9k_hw_phy_disable(struct ath_hal *ah);
+void ath9k_hw_reset_calvalid(struct ath_hal *ah, struct ath9k_channel *chan,
+			     bool *isCalDone);
+void ath9k_hw_ani_monitor(struct ath_hal *ah,
+			  const struct ath9k_node_stats *stats,
+			  struct ath9k_channel *chan);
+bool ath9k_hw_calibrate(struct ath_hal *ah,
+			struct ath9k_channel *chan,
+			u8 rxchainmask,
+			bool longcal,
+			bool *isCalDone);
+int16_t ath9k_hw_getchan_noise(struct ath_hal *ah,
+			       struct ath9k_channel *chan);
+void ath9k_hw_write_associd(struct ath_hal *ah, const u8 *bssid,
+			    u16 assocId);
+void ath9k_hw_setrxfilter(struct ath_hal *ah, u32 bits);
+void ath9k_hw_write_associd(struct ath_hal *ah, const u8 *bssid,
+			    u16 assocId);
+bool ath9k_hw_stoptxdma(struct ath_hal *ah, u32 q);
+void ath9k_hw_reset_tsf(struct ath_hal *ah);
+bool ath9k_hw_keyisvalid(struct ath_hal *ah, u16 entry);
+bool ath9k_hw_keysetmac(struct ath_hal *ah, u16 entry,
+			const u8 *mac);
+bool ath9k_hw_set_keycache_entry(struct ath_hal *ah,
+				 u16 entry,
+				 const struct ath9k_keyval *k,
+				 const u8 *mac,
+				 int xorKey);
+bool ath9k_hw_set_tsfadjust(struct ath_hal *ah,
+			    u32 setting);
+void ath9k_hw_configpcipowersave(struct ath_hal *ah, int restore);
+bool ath9k_hw_intrpend(struct ath_hal *ah);
+bool ath9k_hw_getisr(struct ath_hal *ah, enum ath9k_int *masked);
+bool ath9k_hw_updatetxtriglevel(struct ath_hal *ah,
+				bool bIncTrigLevel);
+void ath9k_hw_procmibevent(struct ath_hal *ah,
+			   const struct ath9k_node_stats *stats);
+bool ath9k_hw_setrxabort(struct ath_hal *ah, bool set);
+void ath9k_hw_set11nmac2040(struct ath_hal *ah, enum ath9k_ht_macmode mode);
+bool ath9k_hw_phycounters(struct ath_hal *ah);
+bool ath9k_hw_keyreset(struct ath_hal *ah, u16 entry);
+bool ath9k_hw_getcapability(struct ath_hal *ah,
+			    enum ath9k_capability_type type,
+			    u32 capability,
+			    u32 *result);
+bool ath9k_hw_setcapability(struct ath_hal *ah,
+			    enum ath9k_capability_type type,
+			    u32 capability,
+			    u32 setting,
+			    int *status);
+u32 ath9k_hw_getdefantenna(struct ath_hal *ah);
+void ath9k_hw_getmac(struct ath_hal *ah, u8 *mac);
+void ath9k_hw_getbssidmask(struct ath_hal *ah, u8 *mask);
+bool ath9k_hw_setbssidmask(struct ath_hal *ah,
+			   const u8 *mask);
+bool ath9k_hw_setpower(struct ath_hal *ah,
+		       enum ath9k_power_mode mode);
+enum ath9k_int ath9k_hw_intrget(struct ath_hal *ah);
+u64 ath9k_hw_gettsf64(struct ath_hal *ah);
+u32 ath9k_hw_getdefantenna(struct ath_hal *ah);
+bool ath9k_hw_setslottime(struct ath_hal *ah, u32 us);
+bool ath9k_hw_setantennaswitch(struct ath_hal *ah,
+			       enum ath9k_ant_setting settings,
+			       struct ath9k_channel *chan,
+			       u8 *tx_chainmask,
+			       u8 *rx_chainmask,
+			       u8 *antenna_cfgd);
+void ath9k_hw_setantenna(struct ath_hal *ah, u32 antenna);
+int ath9k_hw_select_antconfig(struct ath_hal *ah,
+			      u32 cfg);
+bool ath9k_hw_puttxbuf(struct ath_hal *ah, u32 q,
+		       u32 txdp);
+bool ath9k_hw_txstart(struct ath_hal *ah, u32 q);
+u16 ath9k_hw_computetxtime(struct ath_hal *ah,
+				 const struct ath9k_rate_table *rates,
+				 u32 frameLen, u16 rateix,
+				 bool shortPreamble);
+void ath9k_hw_set11n_ratescenario(struct ath_hal *ah, struct ath_desc *ds,
+				  struct ath_desc *lastds,
+				  u32 durUpdateEn, u32 rtsctsRate,
+				  u32 rtsctsDuration,
+				  struct ath9k_11n_rate_series series[],
+				  u32 nseries, u32 flags);
+void ath9k_hw_set11n_burstduration(struct ath_hal *ah,
+				   struct ath_desc *ds,
+				   u32 burstDuration);
+void ath9k_hw_cleartxdesc(struct ath_hal *ah, struct ath_desc *ds);
+u32 ath9k_hw_reverse_bits(u32 val, u32 n);
+bool ath9k_hw_resettxqueue(struct ath_hal *ah, u32 q);
+u32 ath9k_regd_get_ctl(struct ath_hal *ah, struct ath9k_channel *chan);
+u32 ath9k_regd_get_antenna_allowed(struct ath_hal *ah,
+				     struct ath9k_channel *chan);
+u32 ath9k_hw_mhz2ieee(struct ath_hal *ah, u32 freq, u32 flags);
+bool ath9k_hw_get_txq_props(struct ath_hal *ah, int q,
+			    struct ath9k_tx_queue_info *qinfo);
+bool ath9k_hw_set_txq_props(struct ath_hal *ah, int q,
+			    const struct ath9k_tx_queue_info *qinfo);
+struct ath9k_channel *ath9k_regd_check_channel(struct ath_hal *ah,
+					      const struct ath9k_channel *c);
+void ath9k_hw_set11n_txdesc(struct ath_hal *ah, struct ath_desc *ds,
+			    u32 pktLen, enum ath9k_pkt_type type,
+			    u32 txPower, u32 keyIx,
+			    enum ath9k_key_type keyType, u32 flags);
+bool ath9k_hw_filltxdesc(struct ath_hal *ah, struct ath_desc *ds,
+			 u32 segLen, bool firstSeg,
+			 bool lastSeg,
+			 const struct ath_desc *ds0);
+u32 ath9k_hw_GetMibCycleCountsPct(struct ath_hal *ah,
+					u32 *rxc_pcnt,
+					u32 *rxf_pcnt,
+					u32 *txf_pcnt);
+void ath9k_hw_dmaRegDump(struct ath_hal *ah);
+void ath9k_hw_beaconinit(struct ath_hal *ah,
+			 u32 next_beacon, u32 beacon_period);
+void ath9k_hw_set_sta_beacon_timers(struct ath_hal *ah,
+				    const struct ath9k_beacon_state *bs);
+bool ath9k_hw_setuprxdesc(struct ath_hal *ah, struct ath_desc *ds,
+			  u32 size, u32 flags);
+void ath9k_hw_putrxbuf(struct ath_hal *ah, u32 rxdp);
+void ath9k_hw_rxena(struct ath_hal *ah);
+void ath9k_hw_setopmode(struct ath_hal *ah);
+bool ath9k_hw_setmac(struct ath_hal *ah, const u8 *mac);
+void ath9k_hw_setmcastfilter(struct ath_hal *ah, u32 filter0,
+			     u32 filter1);
+u32 ath9k_hw_getrxfilter(struct ath_hal *ah);
+void ath9k_hw_startpcureceive(struct ath_hal *ah);
+void ath9k_hw_stoppcurecv(struct ath_hal *ah);
+bool ath9k_hw_stopdmarecv(struct ath_hal *ah);
+int ath9k_hw_rxprocdesc(struct ath_hal *ah,
+			struct ath_desc *ds, u32 pa,
+			struct ath_desc *nds, u64 tsf);
+u32 ath9k_hw_gettxbuf(struct ath_hal *ah, u32 q);
+int ath9k_hw_txprocdesc(struct ath_hal *ah,
+			struct ath_desc *ds);
+void ath9k_hw_set11n_aggr_middle(struct ath_hal *ah, struct ath_desc *ds,
+				 u32 numDelims);
+void ath9k_hw_set11n_aggr_first(struct ath_hal *ah, struct ath_desc *ds,
+				u32 aggrLen);
+void ath9k_hw_set11n_aggr_last(struct ath_hal *ah, struct ath_desc *ds);
+bool ath9k_hw_releasetxqueue(struct ath_hal *ah, u32 q);
+void ath9k_hw_gettxintrtxqs(struct ath_hal *ah, u32 *txqs);
+void ath9k_hw_clr11n_aggr(struct ath_hal *ah, struct ath_desc *ds);
+void ath9k_hw_set11n_virtualmorefrag(struct ath_hal *ah,
+				     struct ath_desc *ds, u32 vmf);
+bool ath9k_hw_set_txpowerlimit(struct ath_hal *ah, u32 limit);
+bool ath9k_regd_is_public_safety_sku(struct ath_hal *ah);
+int ath9k_hw_setuptxqueue(struct ath_hal *ah, enum ath9k_tx_queue type,
+			  const struct ath9k_tx_queue_info *qinfo);
+u32 ath9k_hw_numtxpending(struct ath_hal *ah, u32 q);
+const char *ath9k_hw_probe(u16 vendorid, u16 devid);
+bool ath9k_hw_disable(struct ath_hal *ah);
+void ath9k_hw_rfdetach(struct ath_hal *ah);
+void ath9k_hw_get_channel_centers(struct ath_hal *ah,
+				  struct ath9k_channel *chan,
+				  struct chan_centers *centers);
+bool ath9k_get_channel_edges(struct ath_hal *ah,
+			     u16 flags, u16 *low,
+			     u16 *high);
+#endif
diff --git a/drivers/net/wireless/ath9k/beacon.c b/drivers/net/wireless/ath9k/beacon.c
new file mode 100644
index 000000000000..caf569401a34
--- /dev/null
+++ b/drivers/net/wireless/ath9k/beacon.c
@@ -0,0 +1,979 @@
+/*
+ * Copyright (c) 2008 Atheros Communications Inc.
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+ /* Implementation of beacon processing. */
+
+#include <asm/unaligned.h>
+#include "core.h"
+
+/*
+ *  Configure parameters for the beacon queue
+ *
+ *  This function will modify certain transmit queue properties depending on
+ *  the operating mode of the station (AP or AdHoc).  Parameters are AIFS
+ *  settings and channel width min/max
+*/
+
+static int ath_beaconq_config(struct ath_softc *sc)
+{
+	struct ath_hal *ah = sc->sc_ah;
+	struct ath9k_tx_queue_info qi;
+
+	ath9k_hw_get_txq_props(ah, sc->sc_bhalq, &qi);
+	if (sc->sc_opmode == ATH9K_M_HOSTAP) {
+		/* Always burst out beacon and CAB traffic. */
+		qi.tqi_aifs = 1;
+		qi.tqi_cwmin = 0;
+		qi.tqi_cwmax = 0;
+	} else {
+		/* Adhoc mode; important thing is to use 2x cwmin. */
+		qi.tqi_aifs = sc->sc_beacon_qi.tqi_aifs;
+		qi.tqi_cwmin = 2*sc->sc_beacon_qi.tqi_cwmin;
+		qi.tqi_cwmax = sc->sc_beacon_qi.tqi_cwmax;
+	}
+
+	if (!ath9k_hw_set_txq_props(ah, sc->sc_bhalq, &qi)) {
+		DPRINTF(sc, ATH_DBG_FATAL,
+			"%s: unable to update h/w beacon queue parameters\n",
+			__func__);
+		return 0;
+	} else {
+		ath9k_hw_resettxqueue(ah, sc->sc_bhalq); /* push to h/w */
+		return 1;
+	}
+}
+
+/*
+ *  Setup the beacon frame for transmit.
+ *
+ *  Associates the beacon frame buffer with a transmit descriptor.  Will set
+ *  up all required antenna switch parameters, rate codes, and channel flags.
+ *  Beacons are always sent out at the lowest rate, and are not retried.
+*/
+
+static void ath_beacon_setup(struct ath_softc *sc,
+	struct ath_vap *avp, struct ath_buf *bf)
+{
+	struct sk_buff *skb = (struct sk_buff *)bf->bf_mpdu;
+	struct ath_hal *ah = sc->sc_ah;
+	struct ath_desc *ds;
+	int flags, antenna;
+	const struct ath9k_rate_table *rt;
+	u8 rix, rate;
+	int ctsrate = 0;
+	int ctsduration = 0;
+	struct ath9k_11n_rate_series  series[4];
+
+	DPRINTF(sc, ATH_DBG_BEACON, "%s: m %p len %u\n",
+		__func__, skb, skb->len);
+
+	/* setup descriptors */
+	ds = bf->bf_desc;
+
+	flags = ATH9K_TXDESC_NOACK;
+
+	if (sc->sc_opmode == ATH9K_M_IBSS &&
+	    (ah->ah_caps.hw_caps & ATH9K_HW_CAP_VEOL)) {
+		ds->ds_link = bf->bf_daddr; /* self-linked */
+		flags |= ATH9K_TXDESC_VEOL;
+		/* Let hardware handle antenna switching. */
+		antenna = 0;
+	} else {
+		ds->ds_link = 0;
+		/*
+		 * Switch antenna every beacon.
+		 * Should only switch every beacon period, not for every
+		 * SWBA's
+		 * XXX assumes two antenna
+		 */
+		antenna = ((sc->ast_be_xmit / sc->sc_nbcnvaps) & 1 ? 2 : 1);
+	}
+
+	ds->ds_data = bf->bf_buf_addr;
+
+	/*
+	 * Calculate rate code.
+	 * XXX everything at min xmit rate
+	 */
+	rix = 0;
+	rt = sc->sc_currates;
+	rate = rt->info[rix].rateCode;
+	if (sc->sc_flags & ATH_PREAMBLE_SHORT)
+		rate |= rt->info[rix].shortPreamble;
+
+	ath9k_hw_set11n_txdesc(ah, ds
+			      , skb->len + FCS_LEN /* frame length */
+			      , ATH9K_PKT_TYPE_BEACON /* Atheros packet type */
+			      , avp->av_btxctl.txpower /* txpower XXX */
+			      , ATH9K_TXKEYIX_INVALID /* no encryption */
+			      , ATH9K_KEY_TYPE_CLEAR /* no encryption */
+			      , flags /* no ack, veol for beacons */
+		);
+
+	/* NB: beacon's BufLen must be a multiple of 4 bytes */
+	ath9k_hw_filltxdesc(ah, ds
+			   , roundup(skb->len, 4) /* buffer length */
+			   , true /* first segment */
+			   , true /* last segment */
+			   , ds /* first descriptor */
+		);
+
+	memzero(series, sizeof(struct ath9k_11n_rate_series) * 4);
+	series[0].Tries = 1;
+	series[0].Rate = rate;
+	series[0].ChSel = sc->sc_tx_chainmask;
+	series[0].RateFlags = (ctsrate) ? ATH9K_RATESERIES_RTS_CTS : 0;
+	ath9k_hw_set11n_ratescenario(ah, ds, ds, 0,
+		ctsrate, ctsduration, series, 4, 0);
+}
+
+/* Move everything from the vap's mcast queue to the hardware cab queue.
+ * Caller must hold mcasq lock and cabq lock
+ * XXX MORE_DATA bit?
+ */
+static void empty_mcastq_into_cabq(struct ath_hal *ah,
+	struct ath_txq *mcastq, struct ath_txq *cabq)
+{
+	struct ath_buf *bfmcast;
+
+	BUG_ON(list_empty(&mcastq->axq_q));
+
+	bfmcast = list_first_entry(&mcastq->axq_q, struct ath_buf, list);
+
+	/* link the descriptors */
+	if (!cabq->axq_link)
+		ath9k_hw_puttxbuf(ah, cabq->axq_qnum, bfmcast->bf_daddr);
+	else
+		*cabq->axq_link = bfmcast->bf_daddr;
+
+	/* append the private vap mcast list to  the cabq */
+
+	cabq->axq_depth	+= mcastq->axq_depth;
+	cabq->axq_totalqueued += mcastq->axq_totalqueued;
+	cabq->axq_linkbuf = mcastq->axq_linkbuf;
+	cabq->axq_link = mcastq->axq_link;
+	list_splice_tail_init(&mcastq->axq_q, &cabq->axq_q);
+	mcastq->axq_depth = 0;
+	mcastq->axq_totalqueued = 0;
+	mcastq->axq_linkbuf = NULL;
+	mcastq->axq_link = NULL;
+}
+
+/* This is only run at DTIM. We move everything from the vap's mcast queue
+ * to the hardware cab queue. Caller must hold the mcastq lock. */
+static void trigger_mcastq(struct ath_hal *ah,
+	struct ath_txq *mcastq, struct ath_txq *cabq)
+{
+	spin_lock_bh(&cabq->axq_lock);
+
+	if (!list_empty(&mcastq->axq_q))
+		empty_mcastq_into_cabq(ah, mcastq, cabq);
+
+	/* cabq is gated by beacon so it is safe to start here */
+	if (!list_empty(&cabq->axq_q))
+		ath9k_hw_txstart(ah, cabq->axq_qnum);
+
+	spin_unlock_bh(&cabq->axq_lock);
+}
+
+/*
+ *  Generate beacon frame and queue cab data for a vap.
+ *
+ *  Updates the contents of the beacon frame.  It is assumed that the buffer for
+ *  the beacon frame has been allocated in the ATH object, and simply needs to
+ *  be filled for this cycle.  Also, any CAB (crap after beacon?) traffic will
+ *  be added to the beacon frame at this point.
+*/
+static struct ath_buf *ath_beacon_generate(struct ath_softc *sc, int if_id)
+{
+	struct ath_hal *ah = sc->sc_ah;
+	struct ath_buf *bf;
+	struct ath_vap *avp;
+	struct sk_buff *skb;
+	int cabq_depth;
+	int mcastq_depth;
+	int is_beacon_dtim = 0;
+	unsigned int curlen;
+	struct ath_txq *cabq;
+	struct ath_txq *mcastq;
+	avp = sc->sc_vaps[if_id];
+
+	mcastq = &avp->av_mcastq;
+	cabq = sc->sc_cabq;
+
+	ASSERT(avp);
+
+	if (avp->av_bcbuf == NULL) {
+		DPRINTF(sc, ATH_DBG_BEACON, "%s: avp=%p av_bcbuf=%p\n",
+			__func__, avp, avp->av_bcbuf);
+		return NULL;
+	}
+	bf = avp->av_bcbuf;
+	skb = (struct sk_buff *) bf->bf_mpdu;
+
+	/*
+	 * Update dynamic beacon contents.  If this returns
+	 * non-zero then we need to remap the memory because
+	 * the beacon frame changed size (probably because
+	 * of the TIM bitmap).
+	 */
+	curlen = skb->len;
+
+	/* XXX: spin_lock_bh should not be used here, but sparse bitches
+	 * otherwise. We should fix sparse :) */
+	spin_lock_bh(&mcastq->axq_lock);
+	mcastq_depth = avp->av_mcastq.axq_depth;
+
+	if (ath_update_beacon(sc, if_id, &avp->av_boff, skb, mcastq_depth) ==
+	    1) {
+		ath_skb_unmap_single(sc, skb, PCI_DMA_TODEVICE,
+				     get_dma_mem_context(bf, bf_dmacontext));
+		bf->bf_buf_addr = ath_skb_map_single(sc, skb, PCI_DMA_TODEVICE,
+			get_dma_mem_context(bf, bf_dmacontext));
+	} else {
+		pci_dma_sync_single_for_cpu(sc->pdev,
+					    bf->bf_buf_addr,
+					    skb_tailroom(skb),
+					    PCI_DMA_TODEVICE);
+	}
+
+	/*
+	 * if the CABQ traffic from previous DTIM is pending and the current
+	 *  beacon is also a DTIM.
+	 *  1) if there is only one vap let the cab traffic continue.
+	 *  2) if there are more than one vap and we are using staggered
+	 *     beacons, then drain the cabq by dropping all the frames in
+	 *     the cabq so that the current vaps cab traffic can be scheduled.
+	 */
+	spin_lock_bh(&cabq->axq_lock);
+	cabq_depth = cabq->axq_depth;
+	spin_unlock_bh(&cabq->axq_lock);
+
+	is_beacon_dtim = avp->av_boff.bo_tim[4] & 1;
+
+	if (mcastq_depth && is_beacon_dtim && cabq_depth) {
+		/*
+		 * Unlock the cabq lock as ath_tx_draintxq acquires
+		 * the lock again which is a common function and that
+		 * acquires txq lock inside.
+		 */
+		if (sc->sc_nvaps > 1) {
+			ath_tx_draintxq(sc, cabq, false);
+			DPRINTF(sc, ATH_DBG_BEACON,
+				"%s: flush previous cabq traffic\n", __func__);
+		}
+	}
+
+	/* Construct tx descriptor. */
+	ath_beacon_setup(sc, avp, bf);
+
+	/*
+	 * Enable the CAB queue before the beacon queue to
+	 * insure cab frames are triggered by this beacon.
+	 */
+	if (is_beacon_dtim)
+		trigger_mcastq(ah, mcastq, cabq);
+
+	spin_unlock_bh(&mcastq->axq_lock);
+	return bf;
+}
+
+/*
+ * Startup beacon transmission for adhoc mode when they are sent entirely
+ * by the hardware using the self-linked descriptor + veol trick.
+*/
+
+static void ath_beacon_start_adhoc(struct ath_softc *sc, int if_id)
+{
+	struct ath_hal *ah = sc->sc_ah;
+	struct ath_buf *bf;
+	struct ath_vap *avp;
+	struct sk_buff *skb;
+
+	avp = sc->sc_vaps[if_id];
+	ASSERT(avp);
+
+	if (avp->av_bcbuf == NULL) {
+		DPRINTF(sc, ATH_DBG_BEACON, "%s: avp=%p av_bcbuf=%p\n",
+			__func__, avp, avp != NULL ? avp->av_bcbuf : NULL);
+		return;
+	}
+	bf = avp->av_bcbuf;
+	skb = (struct sk_buff *) bf->bf_mpdu;
+
+	/* Construct tx descriptor. */
+	ath_beacon_setup(sc, avp, bf);
+
+	/* NB: caller is known to have already stopped tx dma */
+	ath9k_hw_puttxbuf(ah, sc->sc_bhalq, bf->bf_daddr);
+	ath9k_hw_txstart(ah, sc->sc_bhalq);
+	DPRINTF(sc, ATH_DBG_BEACON, "%s: TXDP%u = %llx (%p)\n", __func__,
+		sc->sc_bhalq, ito64(bf->bf_daddr), bf->bf_desc);
+}
+
+/*
+ *  Setup a h/w transmit queue for beacons.
+ *
+ *  This function allocates an information structure (struct ath9k_txq_info)
+ *  on the stack, sets some specific parameters (zero out channel width
+ *  min/max, and enable aifs). The info structure does not need to be
+ *  persistant.
+*/
+
+int ath_beaconq_setup(struct ath_hal *ah)
+{
+	struct ath9k_tx_queue_info qi;
+
+	memzero(&qi, sizeof(qi));
+	qi.tqi_aifs = 1;
+	qi.tqi_cwmin = 0;
+	qi.tqi_cwmax = 0;
+	/* NB: don't enable any interrupts */
+	return ath9k_hw_setuptxqueue(ah, ATH9K_TX_QUEUE_BEACON, &qi);
+}
+
+
+/*
+ *  Allocate and setup an initial beacon frame.
+ *
+ *  Allocate a beacon state variable for a specific VAP instance created on
+ *  the ATH interface.  This routine also calculates the beacon "slot" for
+ *  staggared beacons in the mBSSID case.
+*/
+
+int ath_beacon_alloc(struct ath_softc *sc, int if_id)
+{
+	struct ath_vap *avp;
+	struct ieee80211_hdr *wh;
+	struct ath_buf *bf;
+	struct sk_buff *skb;
+
+	avp = sc->sc_vaps[if_id];
+	ASSERT(avp);
+
+	/* Allocate a beacon descriptor if we haven't done so. */
+	if (!avp->av_bcbuf) {
+		/*
+		 * Allocate beacon state for hostap/ibss.  We know
+		 * a buffer is available.
+		 */
+
+		avp->av_bcbuf = list_first_entry(&sc->sc_bbuf,
+				struct ath_buf, list);
+		list_del(&avp->av_bcbuf->list);
+
+		if (sc->sc_opmode == ATH9K_M_HOSTAP ||
+		    !(sc->sc_ah->ah_caps.hw_caps & ATH9K_HW_CAP_VEOL)) {
+			int slot;
+			/*
+			 * Assign the vap to a beacon xmit slot. As
+			 * above, this cannot fail to find one.
+			 */
+			avp->av_bslot = 0;
+			for (slot = 0; slot < ATH_BCBUF; slot++)
+				if (sc->sc_bslot[slot] == ATH_IF_ID_ANY) {
+					/*
+					 * XXX hack, space out slots to better
+					 * deal with misses
+					 */
+					if (slot+1 < ATH_BCBUF &&
+					    sc->sc_bslot[slot+1] ==
+						ATH_IF_ID_ANY) {
+						avp->av_bslot = slot+1;
+						break;
+					}
+					avp->av_bslot = slot;
+					/* NB: keep looking for a double slot */
+				}
+			BUG_ON(sc->sc_bslot[avp->av_bslot] != ATH_IF_ID_ANY);
+			sc->sc_bslot[avp->av_bslot] = if_id;
+			sc->sc_nbcnvaps++;
+		}
+	}
+
+	/* release the previous beacon frame , if it already exists. */
+	bf = avp->av_bcbuf;
+	if (bf->bf_mpdu != NULL) {
+		skb = (struct sk_buff *)bf->bf_mpdu;
+		ath_skb_unmap_single(sc, skb, PCI_DMA_TODEVICE,
+				     get_dma_mem_context(bf, bf_dmacontext));
+		dev_kfree_skb_any(skb);
+		bf->bf_mpdu = NULL;
+	}
+
+	/*
+	 * NB: the beacon data buffer must be 32-bit aligned;
+	 * we assume the wbuf routines will return us something
+	 * with this alignment (perhaps should assert).
+	 * FIXME: Fill avp->av_boff.bo_tim,avp->av_btxctl.txpower and
+	 * avp->av_btxctl.shortPreamble
+	 */
+	skb = ieee80211_beacon_get(sc->hw, avp->av_if_data);
+	if (skb == NULL) {
+		DPRINTF(sc, ATH_DBG_BEACON, "%s: cannot get skb\n",
+			__func__);
+		return -ENOMEM;
+	}
+
+	/*
+	 * Calculate a TSF adjustment factor required for
+	 * staggered beacons.  Note that we assume the format
+	 * of the beacon frame leaves the tstamp field immediately
+	 * following the header.
+	 */
+	if (avp->av_bslot > 0) {
+		u64 tsfadjust;
+		__le64 val;
+		int intval;
+
+		/* FIXME: Use default value for now: Sujith */
+
+		intval = ATH_DEFAULT_BINTVAL;
+
+		/*
+		 * The beacon interval is in TU's; the TSF in usecs.
+		 * We figure out how many TU's to add to align the
+		 * timestamp then convert to TSF units and handle
+		 * byte swapping before writing it in the frame.
+		 * The hardware will then add this each time a beacon
+		 * frame is sent.  Note that we align vap's 1..N
+		 * and leave vap 0 untouched.  This means vap 0
+		 * has a timestamp in one beacon interval while the
+		 * others get a timestamp aligned to the next interval.
+		 */
+		tsfadjust = (intval * (ATH_BCBUF - avp->av_bslot)) / ATH_BCBUF;
+		val = cpu_to_le64(tsfadjust << 10);     /* TU->TSF */
+
+		DPRINTF(sc, ATH_DBG_BEACON,
+			"%s: %s beacons, bslot %d intval %u tsfadjust %llu\n",
+			__func__, "stagger",
+			avp->av_bslot, intval, (unsigned long long)tsfadjust);
+
+		wh = (struct ieee80211_hdr *)skb->data;
+		memcpy(&wh[1], &val, sizeof(val));
+	}
+
+	bf->bf_buf_addr = ath_skb_map_single(sc, skb, PCI_DMA_TODEVICE,
+		get_dma_mem_context(bf, bf_dmacontext));
+	bf->bf_mpdu = skb;
+
+	return 0;
+}
+
+/*
+ *  Reclaim beacon resources and return buffer to the pool.
+ *
+ *  Checks the VAP to put the beacon frame buffer back to the ATH object
+ *  queue, and de-allocates any wbuf frames that were sent as CAB traffic.
+*/
+
+void ath_beacon_return(struct ath_softc *sc, struct ath_vap *avp)
+{
+	if (avp->av_bcbuf != NULL) {
+		struct ath_buf *bf;
+
+		if (avp->av_bslot != -1) {
+			sc->sc_bslot[avp->av_bslot] = ATH_IF_ID_ANY;
+			sc->sc_nbcnvaps--;
+		}
+
+		bf = avp->av_bcbuf;
+		if (bf->bf_mpdu != NULL) {
+			struct sk_buff *skb = (struct sk_buff *)bf->bf_mpdu;
+			ath_skb_unmap_single(sc, skb, PCI_DMA_TODEVICE,
+				get_dma_mem_context(bf, bf_dmacontext));
+			dev_kfree_skb_any(skb);
+			bf->bf_mpdu = NULL;
+		}
+		list_add_tail(&bf->list, &sc->sc_bbuf);
+
+		avp->av_bcbuf = NULL;
+	}
+}
+
+/*
+ *  Reclaim beacon resources and return buffer to the pool.
+ *
+ *  This function will free any wbuf frames that are still attached to the
+ *  beacon buffers in the ATH object.  Note that this does not de-allocate
+ *  any wbuf objects that are in the transmit queue and have not yet returned
+ *  to the ATH object.
+*/
+
+void ath_beacon_free(struct ath_softc *sc)
+{
+	struct ath_buf *bf;
+
+	list_for_each_entry(bf, &sc->sc_bbuf, list) {
+		if (bf->bf_mpdu != NULL) {
+			struct sk_buff *skb = (struct sk_buff *) bf->bf_mpdu;
+			ath_skb_unmap_single(sc, skb, PCI_DMA_TODEVICE,
+				get_dma_mem_context(bf, bf_dmacontext));
+			dev_kfree_skb_any(skb);
+			bf->bf_mpdu = NULL;
+		}
+	}
+}
+
+/*
+ * Tasklet for Sending Beacons
+ *
+ * Transmit one or more beacon frames at SWBA.  Dynamic updates to the frame
+ * contents are done as needed and the slot time is also adjusted based on
+ * current state.
+ *
+ * This tasklet is not scheduled, it's called in ISR context.
+*/
+
+void ath9k_beacon_tasklet(unsigned long data)
+{
+#define TSF_TO_TU(_h,_l)					\
+	((((u32)(_h)) << 22) | (((u32)(_l)) >> 10))
+
+	struct ath_softc *sc = (struct ath_softc *)data;
+	struct ath_hal *ah = sc->sc_ah;
+	struct ath_buf *bf = NULL;
+	int slot, if_id;
+	u32 bfaddr;
+	u32 rx_clear = 0, rx_frame = 0, tx_frame = 0;
+	u32 show_cycles = 0;
+	u32 bc = 0; /* beacon count */
+	u64 tsf;
+	u32 tsftu;
+	u16 intval;
+
+	if (sc->sc_noreset) {
+		show_cycles = ath9k_hw_GetMibCycleCountsPct(ah,
+							    &rx_clear,
+							    &rx_frame,
+							    &tx_frame);
+	}
+
+	/*
+	 * Check if the previous beacon has gone out.  If
+	 * not don't try to post another, skip this period
+	 * and wait for the next.  Missed beacons indicate
+	 * a problem and should not occur.  If we miss too
+	 * many consecutive beacons reset the device.
+	 */
+	if (ath9k_hw_numtxpending(ah, sc->sc_bhalq) != 0) {
+		sc->sc_bmisscount++;
+		/* XXX: doth needs the chanchange IE countdown decremented.
+		 *      We should consider adding a mac80211 call to indicate
+		 *      a beacon miss so appropriate action could be taken
+		 *      (in that layer).
+		 */
+		if (sc->sc_bmisscount < BSTUCK_THRESH) {
+			if (sc->sc_noreset) {
+				DPRINTF(sc, ATH_DBG_BEACON,
+					"%s: missed %u consecutive beacons\n",
+					__func__, sc->sc_bmisscount);
+				if (show_cycles) {
+					/*
+					 * Display cycle counter stats
+					 * from HW to aide in debug of
+					 * stickiness.
+					 */
+					DPRINTF(sc,
+						ATH_DBG_BEACON,
+						"%s: busy times: rx_clear=%d, "
+						"rx_frame=%d, tx_frame=%d\n",
+						__func__, rx_clear, rx_frame,
+						tx_frame);
+				} else {
+					DPRINTF(sc,
+						ATH_DBG_BEACON,
+						"%s: unable to obtain "
+						"busy times\n", __func__);
+				}
+			} else {
+				DPRINTF(sc, ATH_DBG_BEACON,
+					"%s: missed %u consecutive beacons\n",
+					__func__, sc->sc_bmisscount);
+			}
+		} else if (sc->sc_bmisscount >= BSTUCK_THRESH) {
+			if (sc->sc_noreset) {
+				if (sc->sc_bmisscount == BSTUCK_THRESH) {
+					DPRINTF(sc,
+						ATH_DBG_BEACON,
+						"%s: beacon is officially "
+						"stuck\n", __func__);
+					ath9k_hw_dmaRegDump(ah);
+				}
+			} else {
+				DPRINTF(sc, ATH_DBG_BEACON,
+					"%s: beacon is officially stuck\n",
+					__func__);
+				ath_bstuck_process(sc);
+			}
+		}
+
+		return;
+	}
+	if (sc->sc_bmisscount != 0) {
+		if (sc->sc_noreset) {
+			DPRINTF(sc,
+				ATH_DBG_BEACON,
+				"%s: resume beacon xmit after %u misses\n",
+				__func__, sc->sc_bmisscount);
+		} else {
+			DPRINTF(sc, ATH_DBG_BEACON,
+				"%s: resume beacon xmit after %u misses\n",
+				__func__, sc->sc_bmisscount);
+		}
+		sc->sc_bmisscount = 0;
+	}
+
+	/*
+	 * Generate beacon frames. we are sending frames
+	 * staggered so calculate the slot for this frame based
+	 * on the tsf to safeguard against missing an swba.
+	 */
+
+	/* FIXME: Use default value for now - Sujith */
+	intval = ATH_DEFAULT_BINTVAL;
+
+	tsf = ath9k_hw_gettsf64(ah);
+	tsftu = TSF_TO_TU(tsf>>32, tsf);
+	slot = ((tsftu % intval) * ATH_BCBUF) / intval;
+	if_id = sc->sc_bslot[(slot + 1) % ATH_BCBUF];
+	DPRINTF(sc, ATH_DBG_BEACON,
+			"%s: slot %d [tsf %llu tsftu %u intval %u] if_id %d\n",
+			__func__, slot, (unsigned long long) tsf, tsftu,
+			intval, if_id);
+	bfaddr = 0;
+	if (if_id != ATH_IF_ID_ANY) {
+		bf = ath_beacon_generate(sc, if_id);
+		if (bf != NULL) {
+			bfaddr = bf->bf_daddr;
+			bc = 1;
+		}
+	}
+	/*
+	 * Handle slot time change when a non-ERP station joins/leaves
+	 * an 11g network.  The 802.11 layer notifies us via callback,
+	 * we mark updateslot, then wait one beacon before effecting
+	 * the change.  This gives associated stations at least one
+	 * beacon interval to note the state change.
+	 *
+	 * NB: The slot time change state machine is clocked according
+	 *     to whether we are bursting or staggering beacons.  We
+	 *     recognize the request to update and record the current
+	 *     slot then don't transition until that slot is reached
+	 *     again.  If we miss a beacon for that slot then we'll be
+	 *     slow to transition but we'll be sure at least one beacon
+	 *     interval has passed.  When bursting slot is always left
+	 *     set to ATH_BCBUF so this check is a noop.
+	 */
+	/* XXX locking */
+	if (sc->sc_updateslot == UPDATE) {
+		sc->sc_updateslot = COMMIT; /* commit next beacon */
+		sc->sc_slotupdate = slot;
+	} else if (sc->sc_updateslot == COMMIT && sc->sc_slotupdate == slot)
+		ath_setslottime(sc);        /* commit change to hardware */
+
+	if (bfaddr != 0) {
+		/*
+		 * Stop any current dma and put the new frame(s) on the queue.
+		 * This should never fail since we check above that no frames
+		 * are still pending on the queue.
+		 */
+		if (!ath9k_hw_stoptxdma(ah, sc->sc_bhalq)) {
+			DPRINTF(sc, ATH_DBG_FATAL,
+				"%s: beacon queue %u did not stop?\n",
+				__func__, sc->sc_bhalq);
+			/* NB: the HAL still stops DMA, so proceed */
+		}
+
+		/* NB: cabq traffic should already be queued and primed */
+		ath9k_hw_puttxbuf(ah, sc->sc_bhalq, bfaddr);
+		ath9k_hw_txstart(ah, sc->sc_bhalq);
+
+		sc->ast_be_xmit += bc;     /* XXX per-vap? */
+	}
+#undef TSF_TO_TU
+}
+
+/*
+ *  Tasklet for Beacon Stuck processing
+ *
+ *  Processing for Beacon Stuck.
+ *  Basically calls the ath_internal_reset function to reset the chip.
+*/
+
+void ath_bstuck_process(struct ath_softc *sc)
+{
+	DPRINTF(sc, ATH_DBG_BEACON,
+		"%s: stuck beacon; resetting (bmiss count %u)\n",
+		__func__, sc->sc_bmisscount);
+	ath_internal_reset(sc);
+}
+
+/*
+ * Configure the beacon and sleep timers.
+ *
+ * When operating as an AP this resets the TSF and sets
+ * up the hardware to notify us when we need to issue beacons.
+ *
+ * When operating in station mode this sets up the beacon
+ * timers according to the timestamp of the last received
+ * beacon and the current TSF, configures PCF and DTIM
+ * handling, programs the sleep registers so the hardware
+ * will wakeup in time to receive beacons, and configures
+ * the beacon miss handling so we'll receive a BMISS
+ * interrupt when we stop seeing beacons from the AP
+ * we've associated with.
+ */
+
+void ath_beacon_config(struct ath_softc *sc, int if_id)
+{
+#define TSF_TO_TU(_h,_l)					\
+	((((u32)(_h)) << 22) | (((u32)(_l)) >> 10))
+	struct ath_hal *ah = sc->sc_ah;
+	u32 nexttbtt, intval;
+	struct ath_beacon_config conf;
+	enum ath9k_opmode av_opmode;
+
+	if (if_id != ATH_IF_ID_ANY)
+		av_opmode = sc->sc_vaps[if_id]->av_opmode;
+	else
+		av_opmode = sc->sc_opmode;
+
+	memzero(&conf, sizeof(struct ath_beacon_config));
+
+	/* FIXME: Use default values for now - Sujith */
+	/* Query beacon configuration first */
+	/*
+	 * Protocol stack doesn't support dynamic beacon configuration,
+	 * use default configurations.
+	 */
+	conf.beacon_interval = ATH_DEFAULT_BINTVAL;
+	conf.listen_interval = 1;
+	conf.dtim_period = conf.beacon_interval;
+	conf.dtim_count = 1;
+	conf.bmiss_timeout = ATH_DEFAULT_BMISS_LIMIT * conf.beacon_interval;
+
+	/* extract tstamp from last beacon and convert to TU */
+	nexttbtt = TSF_TO_TU(get_unaligned_le32(conf.u.last_tstamp + 4),
+			     get_unaligned_le32(conf.u.last_tstamp));
+	/* XXX conditionalize multi-bss support? */
+	if (sc->sc_opmode == ATH9K_M_HOSTAP) {
+		/*
+		 * For multi-bss ap support beacons are either staggered
+		 * evenly over N slots or burst together.  For the former
+		 * arrange for the SWBA to be delivered for each slot.
+		 * Slots that are not occupied will generate nothing.
+		 */
+		/* NB: the beacon interval is kept internally in TU's */
+		intval = conf.beacon_interval & ATH9K_BEACON_PERIOD;
+		intval /= ATH_BCBUF;    /* for staggered beacons */
+	} else {
+		intval = conf.beacon_interval & ATH9K_BEACON_PERIOD;
+	}
+
+	if (nexttbtt == 0)      /* e.g. for ap mode */
+		nexttbtt = intval;
+	else if (intval)        /* NB: can be 0 for monitor mode */
+		nexttbtt = roundup(nexttbtt, intval);
+	DPRINTF(sc, ATH_DBG_BEACON, "%s: nexttbtt %u intval %u (%u)\n",
+		__func__, nexttbtt, intval, conf.beacon_interval);
+	/* Check for ATH9K_M_HOSTAP and sc_nostabeacons for WDS client */
+	if (sc->sc_opmode == ATH9K_M_STA) {
+		struct ath9k_beacon_state bs;
+		u64 tsf;
+		u32 tsftu;
+		int dtimperiod, dtimcount, sleepduration;
+		int cfpperiod, cfpcount;
+
+		/*
+		 * Setup dtim and cfp parameters according to
+		 * last beacon we received (which may be none).
+		 */
+		dtimperiod = conf.dtim_period;
+		if (dtimperiod <= 0)        /* NB: 0 if not known */
+			dtimperiod = 1;
+		dtimcount = conf.dtim_count;
+		if (dtimcount >= dtimperiod)    /* NB: sanity check */
+			dtimcount = 0;      /* XXX? */
+		cfpperiod = 1;          /* NB: no PCF support yet */
+		cfpcount = 0;
+
+		sleepduration = conf.listen_interval * intval;
+		if (sleepduration <= 0)
+			sleepduration = intval;
+
+#define FUDGE   2
+		/*
+		 * Pull nexttbtt forward to reflect the current
+		 * TSF and calculate dtim+cfp state for the result.
+		 */
+		tsf = ath9k_hw_gettsf64(ah);
+		tsftu = TSF_TO_TU(tsf>>32, tsf) + FUDGE;
+		do {
+			nexttbtt += intval;
+			if (--dtimcount < 0) {
+				dtimcount = dtimperiod - 1;
+				if (--cfpcount < 0)
+					cfpcount = cfpperiod - 1;
+			}
+		} while (nexttbtt < tsftu);
+#undef FUDGE
+		memzero(&bs, sizeof(bs));
+		bs.bs_intval = intval;
+		bs.bs_nexttbtt = nexttbtt;
+		bs.bs_dtimperiod = dtimperiod*intval;
+		bs.bs_nextdtim = bs.bs_nexttbtt + dtimcount*intval;
+		bs.bs_cfpperiod = cfpperiod*bs.bs_dtimperiod;
+		bs.bs_cfpnext = bs.bs_nextdtim + cfpcount*bs.bs_dtimperiod;
+		bs.bs_cfpmaxduration = 0;
+		/*
+		 * Calculate the number of consecutive beacons to miss
+		 * before taking a BMISS interrupt.  The configuration
+		 * is specified in TU so we only need calculate based
+		 * on the beacon interval.  Note that we clamp the
+		 * result to at most 15 beacons.
+		 */
+		if (sleepduration > intval) {
+			bs.bs_bmissthreshold =
+				conf.listen_interval *
+					ATH_DEFAULT_BMISS_LIMIT / 2;
+		} else {
+			bs.bs_bmissthreshold =
+				DIV_ROUND_UP(conf.bmiss_timeout, intval);
+			if (bs.bs_bmissthreshold > 15)
+				bs.bs_bmissthreshold = 15;
+			else if (bs.bs_bmissthreshold <= 0)
+				bs.bs_bmissthreshold = 1;
+		}
+
+		/*
+		 * Calculate sleep duration.  The configuration is
+		 * given in ms.  We insure a multiple of the beacon
+		 * period is used.  Also, if the sleep duration is
+		 * greater than the DTIM period then it makes senses
+		 * to make it a multiple of that.
+		 *
+		 * XXX fixed at 100ms
+		 */
+
+		bs.bs_sleepduration =
+			roundup(IEEE80211_MS_TO_TU(100), sleepduration);
+		if (bs.bs_sleepduration > bs.bs_dtimperiod)
+			bs.bs_sleepduration = bs.bs_dtimperiod;
+
+		DPRINTF(sc, ATH_DBG_BEACON,
+			"%s: tsf %llu "
+			"tsf:tu %u "
+			"intval %u "
+			"nexttbtt %u "
+			"dtim %u "
+			"nextdtim %u "
+			"bmiss %u "
+			"sleep %u "
+			"cfp:period %u "
+			"maxdur %u "
+			"next %u "
+			"timoffset %u\n"
+			, __func__
+			, (unsigned long long)tsf, tsftu
+			, bs.bs_intval
+			, bs.bs_nexttbtt
+			, bs.bs_dtimperiod
+			, bs.bs_nextdtim
+			, bs.bs_bmissthreshold
+			, bs.bs_sleepduration
+			, bs.bs_cfpperiod
+			, bs.bs_cfpmaxduration
+			, bs.bs_cfpnext
+			, bs.bs_timoffset
+			);
+
+		ath9k_hw_set_interrupts(ah, 0);
+		ath9k_hw_set_sta_beacon_timers(ah, &bs);
+		sc->sc_imask |= ATH9K_INT_BMISS;
+		ath9k_hw_set_interrupts(ah, sc->sc_imask);
+	} else {
+		u64 tsf;
+		u32 tsftu;
+		ath9k_hw_set_interrupts(ah, 0);
+		if (nexttbtt == intval)
+			intval |= ATH9K_BEACON_RESET_TSF;
+		if (sc->sc_opmode == ATH9K_M_IBSS) {
+			/*
+			 * Pull nexttbtt forward to reflect the current
+			 * TSF .
+			 */
+#define FUDGE   2
+			if (!(intval & ATH9K_BEACON_RESET_TSF)) {
+				tsf = ath9k_hw_gettsf64(ah);
+				tsftu = TSF_TO_TU((u32)(tsf>>32),
+					(u32)tsf) + FUDGE;
+				do {
+					nexttbtt += intval;
+				} while (nexttbtt < tsftu);
+			}
+#undef FUDGE
+			DPRINTF(sc, ATH_DBG_BEACON,
+				"%s: IBSS nexttbtt %u intval %u (%u)\n",
+				__func__, nexttbtt,
+				intval & ~ATH9K_BEACON_RESET_TSF,
+				conf.beacon_interval);
+
+			/*
+			 * In IBSS mode enable the beacon timers but only
+			 * enable SWBA interrupts if we need to manually
+			 * prepare beacon frames.  Otherwise we use a
+			 * self-linked tx descriptor and let the hardware
+			 * deal with things.
+			 */
+			intval |= ATH9K_BEACON_ENA;
+			if (!(ah->ah_caps.hw_caps & ATH9K_HW_CAP_VEOL))
+				sc->sc_imask |= ATH9K_INT_SWBA;
+			ath_beaconq_config(sc);
+		} else if (sc->sc_opmode == ATH9K_M_HOSTAP) {
+			/*
+			 * In AP mode we enable the beacon timers and
+			 * SWBA interrupts to prepare beacon frames.
+			 */
+			intval |= ATH9K_BEACON_ENA;
+			sc->sc_imask |= ATH9K_INT_SWBA;   /* beacon prepare */
+			ath_beaconq_config(sc);
+		}
+		ath9k_hw_beaconinit(ah, nexttbtt, intval);
+		sc->sc_bmisscount = 0;
+		ath9k_hw_set_interrupts(ah, sc->sc_imask);
+		/*
+		 * When using a self-linked beacon descriptor in
+		 * ibss mode load it once here.
+		 */
+		if (sc->sc_opmode == ATH9K_M_IBSS &&
+		    (ah->ah_caps.hw_caps & ATH9K_HW_CAP_VEOL))
+			ath_beacon_start_adhoc(sc, 0);
+	}
+#undef TSF_TO_TU
+}
+
+/* Function to collect beacon rssi data and resync beacon if necessary */
+
+void ath_beacon_sync(struct ath_softc *sc, int if_id)
+{
+	/*
+	 * Resync beacon timers using the tsf of the
+	 * beacon frame we just received.
+	 */
+	ath_beacon_config(sc, if_id);
+	sc->sc_beacons = 1;
+}
diff --git a/drivers/net/wireless/ath9k/core.c b/drivers/net/wireless/ath9k/core.c
new file mode 100644
index 000000000000..f6c45288d0e7
--- /dev/null
+++ b/drivers/net/wireless/ath9k/core.c
@@ -0,0 +1,1923 @@
+/*
+ * Copyright (c) 2008, Atheros Communications Inc.
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+ /* Implementation of the main "ATH" layer. */
+
+#include "core.h"
+#include "regd.h"
+
+static int ath_outdoor;		/* enable outdoor use */
+
+static const u8 ath_bcast_mac[ETH_ALEN] =
+    { 0xff, 0xff, 0xff, 0xff, 0xff, 0xff };
+
+static u32 ath_chainmask_sel_up_rssi_thres =
+	ATH_CHAINMASK_SEL_UP_RSSI_THRES;
+static u32 ath_chainmask_sel_down_rssi_thres =
+	ATH_CHAINMASK_SEL_DOWN_RSSI_THRES;
+static u32 ath_chainmask_sel_period =
+	ATH_CHAINMASK_SEL_TIMEOUT;
+
+/* return bus cachesize in 4B word units */
+
+static void bus_read_cachesize(struct ath_softc *sc, int *csz)
+{
+	u8 u8tmp;
+
+	pci_read_config_byte(sc->pdev, PCI_CACHE_LINE_SIZE, (u8 *)&u8tmp);
+	*csz = (int)u8tmp;
+
+	/*
+	 * This check was put in to avoid "unplesant" consequences if
+	 * the bootrom has not fully initialized all PCI devices.
+	 * Sometimes the cache line size register is not set
+	 */
+
+	if (*csz == 0)
+		*csz = DEFAULT_CACHELINE >> 2;   /* Use the default size */
+}
+
+/*
+ *  Set current operating mode
+ *
+ *  This function initializes and fills the rate table in the ATH object based
+ *  on the operating mode.  The blink rates are also set up here, although
+ *  they have been superceeded by the ath_led module.
+*/
+
+static void ath_setcurmode(struct ath_softc *sc, enum wireless_mode mode)
+{
+	const struct ath9k_rate_table *rt;
+	int i;
+
+	memset(sc->sc_rixmap, 0xff, sizeof(sc->sc_rixmap));
+	rt = ath9k_hw_getratetable(sc->sc_ah, mode);
+	BUG_ON(!rt);
+
+	for (i = 0; i < rt->rateCount; i++)
+		sc->sc_rixmap[rt->info[i].rateCode] = (u8) i;
+
+	memzero(sc->sc_hwmap, sizeof(sc->sc_hwmap));
+	for (i = 0; i < 256; i++) {
+		u8 ix = rt->rateCodeToIndex[i];
+
+		if (ix == 0xff)
+			continue;
+
+		sc->sc_hwmap[i].ieeerate =
+		    rt->info[ix].dot11Rate & IEEE80211_RATE_VAL;
+		sc->sc_hwmap[i].rateKbps = rt->info[ix].rateKbps;
+
+		if (rt->info[ix].shortPreamble ||
+		    rt->info[ix].phy == PHY_OFDM) {
+			/* XXX: Handle this */
+		}
+
+		/* NB: this uses the last entry if the rate isn't found */
+		/* XXX beware of overlow */
+	}
+	sc->sc_currates = rt;
+	sc->sc_curmode = mode;
+	/*
+	 * All protection frames are transmited at 2Mb/s for
+	 * 11g, otherwise at 1Mb/s.
+	 * XXX select protection rate index from rate table.
+	 */
+	sc->sc_protrix = (mode == ATH9K_MODE_11G ? 1 : 0);
+}
+
+/*
+ * Set up rate table (legacy rates)
+ */
+static void ath_setup_rates(struct ath_softc *sc, enum ieee80211_band band)
+{
+	struct ath_hal *ah = sc->sc_ah;
+	const struct ath9k_rate_table *rt = NULL;
+	struct ieee80211_supported_band *sband;
+	struct ieee80211_rate *rate;
+	int i, maxrates;
+
+	switch (band) {
+	case IEEE80211_BAND_2GHZ:
+		rt = ath9k_hw_getratetable(ah, ATH9K_MODE_11G);
+		break;
+	case IEEE80211_BAND_5GHZ:
+		rt = ath9k_hw_getratetable(ah, ATH9K_MODE_11A);
+		break;
+	default:
+		break;
+	}
+
+	if (rt == NULL)
+		return;
+
+	sband = &sc->sbands[band];
+	rate = sc->rates[band];
+
+	if (rt->rateCount > ATH_RATE_MAX)
+		maxrates = ATH_RATE_MAX;
+	else
+		maxrates = rt->rateCount;
+
+	for (i = 0; i < maxrates; i++) {
+		rate[i].bitrate = rt->info[i].rateKbps / 100;
+		rate[i].hw_value = rt->info[i].rateCode;
+		sband->n_bitrates++;
+		DPRINTF(sc, ATH_DBG_CONFIG,
+			"%s: Rate: %2dMbps, ratecode: %2d\n",
+			__func__,
+			rate[i].bitrate / 10,
+			rate[i].hw_value);
+	}
+}
+
+/*
+ *  Set up channel list
+ */
+static int ath_setup_channels(struct ath_softc *sc)
+{
+	struct ath_hal *ah = sc->sc_ah;
+	int nchan, i, a = 0, b = 0;
+	u8 regclassids[ATH_REGCLASSIDS_MAX];
+	u32 nregclass = 0;
+	struct ieee80211_supported_band *band_2ghz;
+	struct ieee80211_supported_band *band_5ghz;
+	struct ieee80211_channel *chan_2ghz;
+	struct ieee80211_channel *chan_5ghz;
+	struct ath9k_channel *c;
+
+	/* Fill in ah->ah_channels */
+	if (!ath9k_regd_init_channels(ah,
+				      ATH_CHAN_MAX,
+				      (u32 *)&nchan,
+				      regclassids,
+				      ATH_REGCLASSIDS_MAX,
+				      &nregclass,
+				      CTRY_DEFAULT,
+				      false,
+				      1)) {
+		u32 rd = ah->ah_currentRD;
+
+		DPRINTF(sc, ATH_DBG_FATAL,
+			"%s: unable to collect channel list; "
+			"regdomain likely %u country code %u\n",
+			__func__, rd, CTRY_DEFAULT);
+		return -EINVAL;
+	}
+
+	band_2ghz = &sc->sbands[IEEE80211_BAND_2GHZ];
+	band_5ghz = &sc->sbands[IEEE80211_BAND_5GHZ];
+	chan_2ghz = sc->channels[IEEE80211_BAND_2GHZ];
+	chan_5ghz = sc->channels[IEEE80211_BAND_5GHZ];
+
+	for (i = 0; i < nchan; i++) {
+		c = &ah->ah_channels[i];
+		if (IS_CHAN_2GHZ(c)) {
+			chan_2ghz[a].band = IEEE80211_BAND_2GHZ;
+			chan_2ghz[a].center_freq = c->channel;
+			chan_2ghz[a].max_power = c->maxTxPower;
+
+			if (c->privFlags & CHANNEL_DISALLOW_ADHOC)
+				chan_2ghz[a].flags |=
+					IEEE80211_CHAN_NO_IBSS;
+			if (c->channelFlags & CHANNEL_PASSIVE)
+				chan_2ghz[a].flags |=
+					IEEE80211_CHAN_PASSIVE_SCAN;
+
+			band_2ghz->n_channels = ++a;
+
+			DPRINTF(sc, ATH_DBG_CONFIG,
+				"%s: 2MHz channel: %d, "
+				"channelFlags: 0x%x\n",
+				__func__,
+				c->channel,
+				c->channelFlags);
+		} else if (IS_CHAN_5GHZ(c)) {
+			chan_5ghz[b].band = IEEE80211_BAND_5GHZ;
+			chan_5ghz[b].center_freq = c->channel;
+			chan_5ghz[b].max_power = c->maxTxPower;
+
+			if (c->privFlags & CHANNEL_DISALLOW_ADHOC)
+				chan_5ghz[b].flags |=
+					IEEE80211_CHAN_NO_IBSS;
+			if (c->channelFlags & CHANNEL_PASSIVE)
+				chan_5ghz[b].flags |=
+					IEEE80211_CHAN_PASSIVE_SCAN;
+
+			band_5ghz->n_channels = ++b;
+
+			DPRINTF(sc, ATH_DBG_CONFIG,
+				"%s: 5MHz channel: %d, "
+				"channelFlags: 0x%x\n",
+				__func__,
+				c->channel,
+				c->channelFlags);
+		}
+	}
+
+	return 0;
+}
+
+/*
+ *  Determine mode from channel flags
+ *
+ *  This routine will provide the enumerated WIRELESSS_MODE value based
+ *  on the settings of the channel flags.  If ho valid set of flags
+ *  exist, the lowest mode (11b) is selected.
+*/
+
+static enum wireless_mode ath_chan2mode(struct ath9k_channel *chan)
+{
+	if (chan->chanmode == CHANNEL_A)
+		return ATH9K_MODE_11A;
+	else if (chan->chanmode == CHANNEL_G)
+		return ATH9K_MODE_11G;
+	else if (chan->chanmode == CHANNEL_B)
+		return ATH9K_MODE_11B;
+	else if (chan->chanmode == CHANNEL_A_HT20)
+		return ATH9K_MODE_11NA_HT20;
+	else if (chan->chanmode == CHANNEL_G_HT20)
+		return ATH9K_MODE_11NG_HT20;
+	else if (chan->chanmode == CHANNEL_A_HT40PLUS)
+		return ATH9K_MODE_11NA_HT40PLUS;
+	else if (chan->chanmode == CHANNEL_A_HT40MINUS)
+		return ATH9K_MODE_11NA_HT40MINUS;
+	else if (chan->chanmode == CHANNEL_G_HT40PLUS)
+		return ATH9K_MODE_11NG_HT40PLUS;
+	else if (chan->chanmode == CHANNEL_G_HT40MINUS)
+		return ATH9K_MODE_11NG_HT40MINUS;
+
+	/* NB: should not get here */
+	return ATH9K_MODE_11B;
+}
+
+/*
+ * Stop the device, grabbing the top-level lock to protect
+ * against concurrent entry through ath_init (which can happen
+ * if another thread does a system call and the thread doing the
+ * stop is preempted).
+ */
+
+static int ath_stop(struct ath_softc *sc)
+{
+	struct ath_hal *ah = sc->sc_ah;
+
+	DPRINTF(sc, ATH_DBG_CONFIG, "%s: invalid %u\n",
+		__func__, sc->sc_invalid);
+
+	/*
+	 * Shutdown the hardware and driver:
+	 *    stop output from above
+	 *    reset 802.11 state machine
+	 *      (sends station deassoc/deauth frames)
+	 *    turn off timers
+	 *    disable interrupts
+	 *    clear transmit machinery
+	 *    clear receive machinery
+	 *    turn off the radio
+	 *    reclaim beacon resources
+	 *
+	 * Note that some of this work is not possible if the
+	 * hardware is gone (invalid).
+	 */
+
+	if (!sc->sc_invalid)
+		ath9k_hw_set_interrupts(ah, 0);
+	ath_draintxq(sc, false);
+	if (!sc->sc_invalid) {
+		ath_stoprecv(sc);
+		ath9k_hw_phy_disable(ah);
+	} else
+		sc->sc_rxlink = NULL;
+
+	return 0;
+}
+
+/*
+ *  Start Scan
+ *
+ *  This function is called when starting a channel scan.  It will perform
+ *  power save wakeup processing, set the filter for the scan, and get the
+ *  chip ready to send broadcast packets out during the scan.
+*/
+
+void ath_scan_start(struct ath_softc *sc)
+{
+	struct ath_hal *ah = sc->sc_ah;
+	u32 rfilt;
+	u32 now = (u32) jiffies_to_msecs(get_timestamp());
+
+	sc->sc_scanning = 1;
+	rfilt = ath_calcrxfilter(sc);
+	ath9k_hw_setrxfilter(ah, rfilt);
+	ath9k_hw_write_associd(ah, ath_bcast_mac, 0);
+
+	/* Restore previous power management state. */
+
+	DPRINTF(sc, ATH_DBG_CONFIG, "%d.%03d | %s: RX filter 0x%x aid 0\n",
+		now / 1000, now % 1000, __func__, rfilt);
+}
+
+/*
+ *  Scan End
+ *
+ *  This routine is called by the upper layer when the scan is completed.  This
+ *  will set the filters back to normal operating mode, set the BSSID to the
+ *  correct value, and restore the power save state.
+*/
+
+void ath_scan_end(struct ath_softc *sc)
+{
+	struct ath_hal *ah = sc->sc_ah;
+	u32 rfilt;
+	u32 now = (u32) jiffies_to_msecs(get_timestamp());
+
+	sc->sc_scanning = 0;
+	/* Request for a full reset due to rx packet filter changes */
+	sc->sc_full_reset = 1;
+	rfilt = ath_calcrxfilter(sc);
+	ath9k_hw_setrxfilter(ah, rfilt);
+	ath9k_hw_write_associd(ah, sc->sc_curbssid, sc->sc_curaid);
+
+	DPRINTF(sc, ATH_DBG_CONFIG, "%d.%03d | %s: RX filter 0x%x aid 0x%x\n",
+		now / 1000, now % 1000, __func__, rfilt, sc->sc_curaid);
+}
+
+/*
+ * Set the current channel
+ *
+ * Set/change channels.  If the channel is really being changed, it's done
+ * by reseting the chip.  To accomplish this we must first cleanup any pending
+ * DMA, then restart stuff after a la ath_init.
+*/
+int ath_set_channel(struct ath_softc *sc, struct ath9k_channel *hchan)
+{
+	struct ath_hal *ah = sc->sc_ah;
+	bool fastcc = true, stopped;
+	enum ath9k_ht_macmode ht_macmode;
+
+	if (sc->sc_invalid)	/* if the device is invalid or removed */
+		return -EIO;
+
+	DPRINTF(sc, ATH_DBG_CONFIG,
+		"%s: %u (%u MHz) -> %u (%u MHz), cflags:%x\n",
+		__func__,
+		ath9k_hw_mhz2ieee(ah, sc->sc_curchan.channel,
+				  sc->sc_curchan.channelFlags),
+		sc->sc_curchan.channel,
+		ath9k_hw_mhz2ieee(ah, hchan->channel, hchan->channelFlags),
+		hchan->channel, hchan->channelFlags);
+
+	ht_macmode = ath_cwm_macmode(sc);
+
+	if (hchan->channel != sc->sc_curchan.channel ||
+	    hchan->channelFlags != sc->sc_curchan.channelFlags ||
+	    sc->sc_update_chainmask || sc->sc_full_reset) {
+		int status;
+		/*
+		 * This is only performed if the channel settings have
+		 * actually changed.
+		 *
+		 * To switch channels clear any pending DMA operations;
+		 * wait long enough for the RX fifo to drain, reset the
+		 * hardware at the new frequency, and then re-enable
+		 * the relevant bits of the h/w.
+		 */
+		ath9k_hw_set_interrupts(ah, 0);	/* disable interrupts */
+		ath_draintxq(sc, false);	/* clear pending tx frames */
+		stopped = ath_stoprecv(sc);	/* turn off frame recv */
+
+		/* XXX: do not flush receive queue here. We don't want
+		 * to flush data frames already in queue because of
+		 * changing channel. */
+
+		if (!stopped || sc->sc_full_reset)
+			fastcc = false;
+
+		spin_lock_bh(&sc->sc_resetlock);
+		if (!ath9k_hw_reset(ah, sc->sc_opmode, hchan,
+					ht_macmode, sc->sc_tx_chainmask,
+					sc->sc_rx_chainmask,
+					sc->sc_ht_extprotspacing,
+					fastcc, &status)) {
+			DPRINTF(sc, ATH_DBG_FATAL,
+				"%s: unable to reset channel %u (%uMhz) "
+				"flags 0x%x hal status %u\n", __func__,
+				ath9k_hw_mhz2ieee(ah, hchan->channel,
+						  hchan->channelFlags),
+				hchan->channel, hchan->channelFlags, status);
+			spin_unlock_bh(&sc->sc_resetlock);
+			return -EIO;
+		}
+		spin_unlock_bh(&sc->sc_resetlock);
+
+		sc->sc_curchan = *hchan;
+		sc->sc_update_chainmask = 0;
+		sc->sc_full_reset = 0;
+
+		/* Re-enable rx framework */
+		if (ath_startrecv(sc) != 0) {
+			DPRINTF(sc, ATH_DBG_FATAL,
+				"%s: unable to restart recv logic\n", __func__);
+			return -EIO;
+		}
+		/*
+		 * Change channels and update the h/w rate map
+		 * if we're switching; e.g. 11a to 11b/g.
+		 */
+		ath_setcurmode(sc, ath_chan2mode(hchan));
+
+		ath_update_txpow(sc);	/* update tx power state */
+		/*
+		 * Re-enable interrupts.
+		 */
+		ath9k_hw_set_interrupts(ah, sc->sc_imask);
+	}
+	return 0;
+}
+
+/**********************/
+/* Chainmask Handling */
+/**********************/
+
+static void ath_chainmask_sel_timertimeout(unsigned long data)
+{
+	struct ath_chainmask_sel *cm = (struct ath_chainmask_sel *)data;
+	cm->switch_allowed = 1;
+}
+
+/* Start chainmask select timer */
+static void ath_chainmask_sel_timerstart(struct ath_chainmask_sel *cm)
+{
+	cm->switch_allowed = 0;
+	mod_timer(&cm->timer, ath_chainmask_sel_period);
+}
+
+/* Stop chainmask select timer */
+static void ath_chainmask_sel_timerstop(struct ath_chainmask_sel *cm)
+{
+	cm->switch_allowed = 0;
+	del_timer_sync(&cm->timer);
+}
+
+static void ath_chainmask_sel_init(struct ath_softc *sc, struct ath_node *an)
+{
+	struct ath_chainmask_sel *cm = &an->an_chainmask_sel;
+
+	memzero(cm, sizeof(struct ath_chainmask_sel));
+
+	cm->cur_tx_mask = sc->sc_tx_chainmask;
+	cm->cur_rx_mask = sc->sc_rx_chainmask;
+	cm->tx_avgrssi = ATH_RSSI_DUMMY_MARKER;
+	setup_timer(&cm->timer,
+		ath_chainmask_sel_timertimeout, (unsigned long) cm);
+}
+
+int ath_chainmask_sel_logic(struct ath_softc *sc, struct ath_node *an)
+{
+	struct ath_chainmask_sel *cm = &an->an_chainmask_sel;
+
+	/*
+	 * Disable auto-swtiching in one of the following if conditions.
+	 * sc_chainmask_auto_sel is used for internal global auto-switching
+	 * enabled/disabled setting
+	 */
+	if (sc->sc_ah->ah_caps.tx_chainmask != ATH_CHAINMASK_SEL_3X3) {
+		cm->cur_tx_mask = sc->sc_tx_chainmask;
+		return cm->cur_tx_mask;
+	}
+
+	if (cm->tx_avgrssi == ATH_RSSI_DUMMY_MARKER)
+		return cm->cur_tx_mask;
+
+	if (cm->switch_allowed) {
+		/* Switch down from tx 3 to tx 2. */
+		if (cm->cur_tx_mask == ATH_CHAINMASK_SEL_3X3 &&
+		    ATH_RSSI_OUT(cm->tx_avgrssi) >=
+		    ath_chainmask_sel_down_rssi_thres) {
+			cm->cur_tx_mask = sc->sc_tx_chainmask;
+
+			/* Don't let another switch happen until
+			 * this timer expires */
+			ath_chainmask_sel_timerstart(cm);
+		}
+		/* Switch up from tx 2 to 3. */
+		else if (cm->cur_tx_mask == sc->sc_tx_chainmask &&
+			 ATH_RSSI_OUT(cm->tx_avgrssi) <=
+			 ath_chainmask_sel_up_rssi_thres) {
+			cm->cur_tx_mask = ATH_CHAINMASK_SEL_3X3;
+
+			/* Don't let another switch happen
+			 * until this timer expires */
+			ath_chainmask_sel_timerstart(cm);
+		}
+	}
+
+	return cm->cur_tx_mask;
+}
+
+/*
+ * Update tx/rx chainmask. For legacy association,
+ * hard code chainmask to 1x1, for 11n association, use
+ * the chainmask configuration.
+ */
+
+void ath_update_chainmask(struct ath_softc *sc, int is_ht)
+{
+	sc->sc_update_chainmask = 1;
+	if (is_ht) {
+		sc->sc_tx_chainmask = sc->sc_ah->ah_caps.tx_chainmask;
+		sc->sc_rx_chainmask = sc->sc_ah->ah_caps.rx_chainmask;
+	} else {
+		sc->sc_tx_chainmask = 1;
+		sc->sc_rx_chainmask = 1;
+	}
+
+	DPRINTF(sc, ATH_DBG_CONFIG, "%s: tx chmask: %d, rx chmask: %d\n",
+		__func__, sc->sc_tx_chainmask, sc->sc_rx_chainmask);
+}
+
+/******************/
+/* VAP management */
+/******************/
+
+/*
+ *  VAP in Listen mode
+ *
+ *  This routine brings the VAP out of the down state into a "listen" state
+ *  where it waits for association requests.  This is used in AP and AdHoc
+ *  modes.
+*/
+
+int ath_vap_listen(struct ath_softc *sc, int if_id)
+{
+	struct ath_hal *ah = sc->sc_ah;
+	struct ath_vap *avp;
+	u32 rfilt = 0;
+	DECLARE_MAC_BUF(mac);
+
+	avp = sc->sc_vaps[if_id];
+	if (avp == NULL) {
+		DPRINTF(sc, ATH_DBG_FATAL, "%s: invalid interface id %u\n",
+			__func__, if_id);
+		return -EINVAL;
+	}
+
+#ifdef CONFIG_SLOW_ANT_DIV
+	ath_slow_ant_div_stop(&sc->sc_antdiv);
+#endif
+
+	/* update ratectrl about the new state */
+	ath_rate_newstate(sc, avp);
+
+	rfilt = ath_calcrxfilter(sc);
+	ath9k_hw_setrxfilter(ah, rfilt);
+
+	if (sc->sc_opmode == ATH9K_M_STA || sc->sc_opmode == ATH9K_M_IBSS) {
+		memcpy(sc->sc_curbssid, ath_bcast_mac, ETH_ALEN);
+		ath9k_hw_write_associd(ah, sc->sc_curbssid, sc->sc_curaid);
+	} else
+		sc->sc_curaid = 0;
+
+	DPRINTF(sc, ATH_DBG_CONFIG,
+		"%s: RX filter 0x%x bssid %s aid 0x%x\n",
+		__func__, rfilt, print_mac(mac,
+			sc->sc_curbssid), sc->sc_curaid);
+
+	/*
+	 * XXXX
+	 * Disable BMISS interrupt when we're not associated
+	 */
+	ath9k_hw_set_interrupts(ah,
+		sc->sc_imask & ~(ATH9K_INT_SWBA | ATH9K_INT_BMISS));
+	sc->sc_imask &= ~(ATH9K_INT_SWBA | ATH9K_INT_BMISS);
+	/* need to reconfigure the beacons when it moves to RUN */
+	sc->sc_beacons = 0;
+
+	return 0;
+}
+
+int ath_vap_attach(struct ath_softc *sc,
+		   int if_id,
+		   struct ieee80211_vif *if_data,
+		   enum ath9k_opmode opmode)
+{
+	struct ath_vap *avp;
+
+	if (if_id >= ATH_BCBUF || sc->sc_vaps[if_id] != NULL) {
+		DPRINTF(sc, ATH_DBG_FATAL,
+			"%s: Invalid interface id = %u\n", __func__, if_id);
+		return -EINVAL;
+	}
+
+	switch (opmode) {
+	case ATH9K_M_STA:
+	case ATH9K_M_IBSS:
+	case ATH9K_M_MONITOR:
+		break;
+	case ATH9K_M_HOSTAP:
+		/* XXX not right, beacon buffer is allocated on RUN trans */
+		if (list_empty(&sc->sc_bbuf))
+			return -ENOMEM;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	/* create ath_vap */
+	avp = kmalloc(sizeof(struct ath_vap), GFP_KERNEL);
+	if (avp == NULL)
+		return -ENOMEM;
+
+	memzero(avp, sizeof(struct ath_vap));
+	avp->av_if_data = if_data;
+	/* Set the VAP opmode */
+	avp->av_opmode = opmode;
+	avp->av_bslot = -1;
+	INIT_LIST_HEAD(&avp->av_mcastq.axq_q);
+	INIT_LIST_HEAD(&avp->av_mcastq.axq_acq);
+	spin_lock_init(&avp->av_mcastq.axq_lock);
+
+	ath9k_hw_set_tsfadjust(sc->sc_ah, 1);
+
+	sc->sc_vaps[if_id] = avp;
+	sc->sc_nvaps++;
+	/* Set the device opmode */
+	sc->sc_opmode = opmode;
+
+	/* default VAP configuration */
+	avp->av_config.av_fixed_rateset = IEEE80211_FIXED_RATE_NONE;
+	avp->av_config.av_fixed_retryset = 0x03030303;
+
+	return 0;
+}
+
+int ath_vap_detach(struct ath_softc *sc, int if_id)
+{
+	struct ath_hal *ah = sc->sc_ah;
+	struct ath_vap *avp;
+
+	avp = sc->sc_vaps[if_id];
+	if (avp == NULL) {
+		DPRINTF(sc, ATH_DBG_FATAL, "%s: invalid interface id %u\n",
+			__func__, if_id);
+		return -EINVAL;
+	}
+
+	/*
+	 * Quiesce the hardware while we remove the vap.  In
+	 * particular we need to reclaim all references to the
+	 * vap state by any frames pending on the tx queues.
+	 *
+	 * XXX can we do this w/o affecting other vap's?
+	 */
+	ath9k_hw_set_interrupts(ah, 0);	/* disable interrupts */
+	ath_draintxq(sc, false);	/* stop xmit side */
+	ath_stoprecv(sc);	/* stop recv side */
+	ath_flushrecv(sc);	/* flush recv queue */
+
+	/* Reclaim any pending mcast bufs on the vap. */
+	ath_tx_draintxq(sc, &avp->av_mcastq, false);
+
+	kfree(avp);
+	sc->sc_vaps[if_id] = NULL;
+	sc->sc_nvaps--;
+
+	return 0;
+}
+
+int ath_vap_config(struct ath_softc *sc,
+	int if_id, struct ath_vap_config *if_config)
+{
+	struct ath_vap *avp;
+
+	if (if_id >= ATH_BCBUF) {
+		DPRINTF(sc, ATH_DBG_FATAL,
+			"%s: Invalid interface id = %u\n", __func__, if_id);
+		return -EINVAL;
+	}
+
+	avp = sc->sc_vaps[if_id];
+	ASSERT(avp != NULL);
+
+	if (avp)
+		memcpy(&avp->av_config, if_config, sizeof(avp->av_config));
+
+	return 0;
+}
+
+/********/
+/* Core */
+/********/
+
+int ath_open(struct ath_softc *sc, struct ath9k_channel *initial_chan)
+{
+	struct ath_hal *ah = sc->sc_ah;
+	int status;
+	int error = 0;
+	enum ath9k_ht_macmode ht_macmode = ath_cwm_macmode(sc);
+
+	DPRINTF(sc, ATH_DBG_CONFIG, "%s: mode %d\n", __func__, sc->sc_opmode);
+
+	/*
+	 * Stop anything previously setup.  This is safe
+	 * whether this is the first time through or not.
+	 */
+	ath_stop(sc);
+
+	/* Initialize chanmask selection */
+	sc->sc_tx_chainmask = ah->ah_caps.tx_chainmask;
+	sc->sc_rx_chainmask = ah->ah_caps.rx_chainmask;
+
+	/* Reset SERDES registers */
+	ath9k_hw_configpcipowersave(ah, 0);
+
+	/*
+	 * The basic interface to setting the hardware in a good
+	 * state is ``reset''.  On return the hardware is known to
+	 * be powered up and with interrupts disabled.  This must
+	 * be followed by initialization of the appropriate bits
+	 * and then setup of the interrupt mask.
+	 */
+	sc->sc_curchan = *initial_chan;
+
+	spin_lock_bh(&sc->sc_resetlock);
+	if (!ath9k_hw_reset(ah, sc->sc_opmode, &sc->sc_curchan, ht_macmode,
+			   sc->sc_tx_chainmask, sc->sc_rx_chainmask,
+			   sc->sc_ht_extprotspacing, false, &status)) {
+		DPRINTF(sc, ATH_DBG_FATAL,
+			"%s: unable to reset hardware; hal status %u "
+			"(freq %u flags 0x%x)\n", __func__, status,
+			sc->sc_curchan.channel, sc->sc_curchan.channelFlags);
+		error = -EIO;
+		spin_unlock_bh(&sc->sc_resetlock);
+		goto done;
+	}
+	spin_unlock_bh(&sc->sc_resetlock);
+	/*
+	 * This is needed only to setup initial state
+	 * but it's best done after a reset.
+	 */
+	ath_update_txpow(sc);
+
+	/*
+	 * Setup the hardware after reset:
+	 * The receive engine is set going.
+	 * Frame transmit is handled entirely
+	 * in the frame output path; there's nothing to do
+	 * here except setup the interrupt mask.
+	 */
+	if (ath_startrecv(sc) != 0) {
+		DPRINTF(sc, ATH_DBG_FATAL,
+			"%s: unable to start recv logic\n", __func__);
+		error = -EIO;
+		goto done;
+	}
+	/* Setup our intr mask. */
+	sc->sc_imask = ATH9K_INT_RX | ATH9K_INT_TX
+		| ATH9K_INT_RXEOL | ATH9K_INT_RXORN
+		| ATH9K_INT_FATAL | ATH9K_INT_GLOBAL;
+
+	if (ah->ah_caps.hw_caps & ATH9K_HW_CAP_GTT)
+		sc->sc_imask |= ATH9K_INT_GTT;
+
+	if (ah->ah_caps.hw_caps & ATH9K_HW_CAP_HT)
+		sc->sc_imask |= ATH9K_INT_CST;
+
+	/*
+	 * Enable MIB interrupts when there are hardware phy counters.
+	 * Note we only do this (at the moment) for station mode.
+	 */
+	if (ath9k_hw_phycounters(ah) &&
+	    ((sc->sc_opmode == ATH9K_M_STA) || (sc->sc_opmode == ATH9K_M_IBSS)))
+		sc->sc_imask |= ATH9K_INT_MIB;
+	/*
+	 * Some hardware processes the TIM IE and fires an
+	 * interrupt when the TIM bit is set.  For hardware
+	 * that does, if not overridden by configuration,
+	 * enable the TIM interrupt when operating as station.
+	 */
+	if ((ah->ah_caps.hw_caps & ATH9K_HW_CAP_ENHANCEDPM) &&
+	    (sc->sc_opmode == ATH9K_M_STA) &&
+	    !sc->sc_config.swBeaconProcess)
+		sc->sc_imask |= ATH9K_INT_TIM;
+	/*
+	 *  Don't enable interrupts here as we've not yet built our
+	 *  vap and node data structures, which will be needed as soon
+	 *  as we start receiving.
+	 */
+	ath_setcurmode(sc, ath_chan2mode(initial_chan));
+
+	/* XXX: we must make sure h/w is ready and clear invalid flag
+	 * before turning on interrupt. */
+	sc->sc_invalid = 0;
+done:
+	return error;
+}
+
+/*
+ * Reset the hardware w/o losing operational state.  This is
+ * basically a more efficient way of doing ath_stop, ath_init,
+ * followed by state transitions to the current 802.11
+ * operational state.  Used to recover from errors rx overrun
+ * and to reset the hardware when rf gain settings must be reset.
+ */
+
+static int ath_reset_start(struct ath_softc *sc, u32 flag)
+{
+	struct ath_hal *ah = sc->sc_ah;
+
+	ath9k_hw_set_interrupts(ah, 0);	/* disable interrupts */
+	ath_draintxq(sc, flag & RESET_RETRY_TXQ);	/* stop xmit side */
+	ath_stoprecv(sc);	/* stop recv side */
+	ath_flushrecv(sc);	/* flush recv queue */
+
+	return 0;
+}
+
+static int ath_reset_end(struct ath_softc *sc, u32 flag)
+{
+	struct ath_hal *ah = sc->sc_ah;
+
+	if (ath_startrecv(sc) != 0)	/* restart recv */
+		DPRINTF(sc, ATH_DBG_FATAL,
+			"%s: unable to start recv logic\n", __func__);
+
+	/*
+	 * We may be doing a reset in response to a request
+	 * that changes the channel so update any state that
+	 * might change as a result.
+	 */
+	ath_setcurmode(sc, ath_chan2mode(&sc->sc_curchan));
+
+	ath_update_txpow(sc);	/* update tx power state */
+
+	if (sc->sc_beacons)
+		ath_beacon_config(sc, ATH_IF_ID_ANY);	/* restart beacons */
+	ath9k_hw_set_interrupts(ah, sc->sc_imask);
+
+	/* Restart the txq */
+	if (flag & RESET_RETRY_TXQ) {
+		int i;
+		for (i = 0; i < ATH9K_NUM_TX_QUEUES; i++) {
+			if (ATH_TXQ_SETUP(sc, i)) {
+				spin_lock_bh(&sc->sc_txq[i].axq_lock);
+				ath_txq_schedule(sc, &sc->sc_txq[i]);
+				spin_unlock_bh(&sc->sc_txq[i].axq_lock);
+			}
+		}
+	}
+	return 0;
+}
+
+int ath_reset(struct ath_softc *sc)
+{
+	struct ath_hal *ah = sc->sc_ah;
+	int status;
+	int error = 0;
+	enum ath9k_ht_macmode ht_macmode = ath_cwm_macmode(sc);
+
+	/* NB: indicate channel change so we do a full reset */
+	spin_lock_bh(&sc->sc_resetlock);
+	if (!ath9k_hw_reset(ah, sc->sc_opmode, &sc->sc_curchan,
+			   ht_macmode,
+			   sc->sc_tx_chainmask, sc->sc_rx_chainmask,
+			   sc->sc_ht_extprotspacing, false, &status)) {
+		DPRINTF(sc, ATH_DBG_FATAL,
+			"%s: unable to reset hardware; hal status %u\n",
+			__func__, status);
+		error = -EIO;
+	}
+	spin_unlock_bh(&sc->sc_resetlock);
+
+	return error;
+}
+
+int ath_suspend(struct ath_softc *sc)
+{
+	struct ath_hal *ah = sc->sc_ah;
+
+	/* No I/O if device has been surprise removed */
+	if (sc->sc_invalid)
+		return -EIO;
+
+	/* Shut off the interrupt before setting sc->sc_invalid to '1' */
+	ath9k_hw_set_interrupts(ah, 0);
+
+	/* XXX: we must make sure h/w will not generate any interrupt
+	 * before setting the invalid flag. */
+	sc->sc_invalid = 1;
+
+	/* disable HAL and put h/w to sleep */
+	ath9k_hw_disable(sc->sc_ah);
+
+	ath9k_hw_configpcipowersave(sc->sc_ah, 1);
+
+	return 0;
+}
+
+/* Interrupt handler.  Most of the actual processing is deferred.
+ * It's the caller's responsibility to ensure the chip is awake. */
+
+irqreturn_t ath_isr(int irq, void *dev)
+{
+	struct ath_softc *sc = dev;
+	struct ath_hal *ah = sc->sc_ah;
+	enum ath9k_int status;
+	bool sched = false;
+
+	do {
+		if (sc->sc_invalid) {
+			/*
+			 * The hardware is not ready/present, don't
+			 * touch anything. Note this can happen early
+			 * on if the IRQ is shared.
+			 */
+			return IRQ_NONE;
+		}
+		if (!ath9k_hw_intrpend(ah)) {	/* shared irq, not for us */
+			return IRQ_NONE;
+		}
+
+		/*
+		 * Figure out the reason(s) for the interrupt.  Note
+		 * that the hal returns a pseudo-ISR that may include
+		 * bits we haven't explicitly enabled so we mask the
+		 * value to insure we only process bits we requested.
+		 */
+		ath9k_hw_getisr(ah, &status);	/* NB: clears ISR too */
+
+		status &= sc->sc_imask;	/* discard unasked-for bits */
+
+		/*
+		 * If there are no status bits set, then this interrupt was not
+		 * for me (should have been caught above).
+		 */
+
+		if (!status)
+			return IRQ_NONE;
+
+		sc->sc_intrstatus = status;
+
+		if (status & ATH9K_INT_FATAL) {
+			/* need a chip reset */
+			sched = true;
+		} else if (status & ATH9K_INT_RXORN) {
+			/* need a chip reset */
+			sched = true;
+		} else {
+			if (status & ATH9K_INT_SWBA) {
+				/* schedule a tasklet for beacon handling */
+				tasklet_schedule(&sc->bcon_tasklet);
+			}
+			if (status & ATH9K_INT_RXEOL) {
+				/*
+				 * NB: the hardware should re-read the link when
+				 *     RXE bit is written, but it doesn't work
+				 *     at least on older hardware revs.
+				 */
+				sched = true;
+			}
+
+			if (status & ATH9K_INT_TXURN)
+				/* bump tx trigger level */
+				ath9k_hw_updatetxtriglevel(ah, true);
+			/* XXX: optimize this */
+			if (status & ATH9K_INT_RX)
+				sched = true;
+			if (status & ATH9K_INT_TX)
+				sched = true;
+			if (status & ATH9K_INT_BMISS)
+				sched = true;
+			/* carrier sense timeout */
+			if (status & ATH9K_INT_CST)
+				sched = true;
+			if (status & ATH9K_INT_MIB) {
+				/*
+				 * Disable interrupts until we service the MIB
+				 * interrupt; otherwise it will continue to
+				 * fire.
+				 */
+				ath9k_hw_set_interrupts(ah, 0);
+				/*
+				 * Let the hal handle the event. We assume
+				 * it will clear whatever condition caused
+				 * the interrupt.
+				 */
+				ath9k_hw_procmibevent(ah, &sc->sc_halstats);
+				ath9k_hw_set_interrupts(ah, sc->sc_imask);
+			}
+			if (status & ATH9K_INT_TIM_TIMER) {
+				if (!(ah->ah_caps.hw_caps &
+				      ATH9K_HW_CAP_AUTOSLEEP)) {
+					/* Clear RxAbort bit so that we can
+					 * receive frames */
+					ath9k_hw_setrxabort(ah, 0);
+					sched = true;
+				}
+			}
+		}
+	} while (0);
+
+	if (sched) {
+		/* turn off every interrupt except SWBA */
+		ath9k_hw_set_interrupts(ah, (sc->sc_imask & ATH9K_INT_SWBA));
+		tasklet_schedule(&sc->intr_tq);
+	}
+
+	return IRQ_HANDLED;
+}
+
+/* Deferred interrupt processing  */
+
+static void ath9k_tasklet(unsigned long data)
+{
+	struct ath_softc *sc = (struct ath_softc *)data;
+	u32 status = sc->sc_intrstatus;
+
+	if (status & ATH9K_INT_FATAL) {
+		/* need a chip reset */
+		ath_internal_reset(sc);
+		return;
+	} else {
+
+		if (status &
+		    (ATH9K_INT_RX | ATH9K_INT_RXEOL | ATH9K_INT_RXORN)) {
+			/* XXX: fill me in */
+			/*
+			if (status & ATH9K_INT_RXORN) {
+			}
+			if (status & ATH9K_INT_RXEOL) {
+			}
+			*/
+			spin_lock_bh(&sc->sc_rxflushlock);
+			ath_rx_tasklet(sc, 0);
+			spin_unlock_bh(&sc->sc_rxflushlock);
+		}
+		/* XXX: optimize this */
+		if (status & ATH9K_INT_TX)
+			ath_tx_tasklet(sc);
+		/* XXX: fill me in */
+		/*
+		if (status & ATH9K_INT_BMISS) {
+		}
+		if (status & (ATH9K_INT_TIM | ATH9K_INT_DTIMSYNC)) {
+			if (status & ATH9K_INT_TIM) {
+			}
+			if (status & ATH9K_INT_DTIMSYNC) {
+			}
+		}
+		*/
+	}
+
+	/* re-enable hardware interrupt */
+	ath9k_hw_set_interrupts(sc->sc_ah, sc->sc_imask);
+}
+
+int ath_init(u16 devid, struct ath_softc *sc)
+{
+	struct ath_hal *ah = NULL;
+	int status;
+	int error = 0, i;
+	int csz = 0;
+	u32 rd;
+
+	/* XXX: hardware will not be ready until ath_open() being called */
+	sc->sc_invalid = 1;
+
+	sc->sc_debug = DBG_DEFAULT;
+	DPRINTF(sc, ATH_DBG_CONFIG, "%s: devid 0x%x\n", __func__, devid);
+
+	/* Initialize tasklet */
+	tasklet_init(&sc->intr_tq, ath9k_tasklet, (unsigned long)sc);
+	tasklet_init(&sc->bcon_tasklet, ath9k_beacon_tasklet,
+		     (unsigned long)sc);
+
+	/*
+	 * Cache line size is used to size and align various
+	 * structures used to communicate with the hardware.
+	 */
+	bus_read_cachesize(sc, &csz);
+	/* XXX assert csz is non-zero */
+	sc->sc_cachelsz = csz << 2;	/* convert to bytes */
+
+	spin_lock_init(&sc->sc_resetlock);
+
+	ah = ath9k_hw_attach(devid, sc, sc->mem, &status);
+	if (ah == NULL) {
+		DPRINTF(sc, ATH_DBG_FATAL,
+			"%s: unable to attach hardware; HAL status %u\n",
+			__func__, status);
+		error = -ENXIO;
+		goto bad;
+	}
+	sc->sc_ah = ah;
+
+	/* Get the chipset-specific aggr limit. */
+	sc->sc_rtsaggrlimit = ah->ah_caps.rts_aggr_limit;
+
+	/* Get the hardware key cache size. */
+	sc->sc_keymax = ah->ah_caps.keycache_size;
+	if (sc->sc_keymax > ATH_KEYMAX) {
+		DPRINTF(sc, ATH_DBG_KEYCACHE,
+			"%s: Warning, using only %u entries in %u key cache\n",
+			__func__, ATH_KEYMAX, sc->sc_keymax);
+		sc->sc_keymax = ATH_KEYMAX;
+	}
+
+	/*
+	 * Reset the key cache since some parts do not
+	 * reset the contents on initial power up.
+	 */
+	for (i = 0; i < sc->sc_keymax; i++)
+		ath9k_hw_keyreset(ah, (u16) i);
+	/*
+	 * Mark key cache slots associated with global keys
+	 * as in use.  If we knew TKIP was not to be used we
+	 * could leave the +32, +64, and +32+64 slots free.
+	 * XXX only for splitmic.
+	 */
+	for (i = 0; i < IEEE80211_WEP_NKID; i++) {
+		set_bit(i, sc->sc_keymap);
+		set_bit(i + 32, sc->sc_keymap);
+		set_bit(i + 64, sc->sc_keymap);
+		set_bit(i + 32 + 64, sc->sc_keymap);
+	}
+	/*
+	 * Collect the channel list using the default country
+	 * code and including outdoor channels.  The 802.11 layer
+	 * is resposible for filtering this list based on settings
+	 * like the phy mode.
+	 */
+	rd = ah->ah_currentRD;
+
+	error = ath_setup_channels(sc);
+	if (error)
+		goto bad;
+
+	/* default to STA mode */
+	sc->sc_opmode = ATH9K_M_MONITOR;
+
+	/* Setup rate tables */
+
+	ath_setup_rates(sc, IEEE80211_BAND_2GHZ);
+	ath_setup_rates(sc, IEEE80211_BAND_5GHZ);
+
+	/* NB: setup here so ath_rate_update is happy */
+	ath_setcurmode(sc, ATH9K_MODE_11A);
+
+	/*
+	 * Allocate hardware transmit queues: one queue for
+	 * beacon frames and one data queue for each QoS
+	 * priority.  Note that the hal handles reseting
+	 * these queues at the needed time.
+	 */
+	sc->sc_bhalq = ath_beaconq_setup(ah);
+	if (sc->sc_bhalq == -1) {
+		DPRINTF(sc, ATH_DBG_FATAL,
+			"%s: unable to setup a beacon xmit queue\n", __func__);
+		error = -EIO;
+		goto bad2;
+	}
+	sc->sc_cabq = ath_txq_setup(sc, ATH9K_TX_QUEUE_CAB, 0);
+	if (sc->sc_cabq == NULL) {
+		DPRINTF(sc, ATH_DBG_FATAL,
+			"%s: unable to setup CAB xmit queue\n", __func__);
+		error = -EIO;
+		goto bad2;
+	}
+
+	sc->sc_config.cabqReadytime = ATH_CABQ_READY_TIME;
+	ath_cabq_update(sc);
+
+	for (i = 0; i < ARRAY_SIZE(sc->sc_haltype2q); i++)
+		sc->sc_haltype2q[i] = -1;
+
+	/* Setup data queues */
+	/* NB: ensure BK queue is the lowest priority h/w queue */
+	if (!ath_tx_setup(sc, ATH9K_WME_AC_BK)) {
+		DPRINTF(sc, ATH_DBG_FATAL,
+			"%s: unable to setup xmit queue for BK traffic\n",
+			__func__);
+		error = -EIO;
+		goto bad2;
+	}
+
+	if (!ath_tx_setup(sc, ATH9K_WME_AC_BE)) {
+		DPRINTF(sc, ATH_DBG_FATAL,
+			"%s: unable to setup xmit queue for BE traffic\n",
+			__func__);
+		error = -EIO;
+		goto bad2;
+	}
+	if (!ath_tx_setup(sc, ATH9K_WME_AC_VI)) {
+		DPRINTF(sc, ATH_DBG_FATAL,
+			"%s: unable to setup xmit queue for VI traffic\n",
+			__func__);
+		error = -EIO;
+		goto bad2;
+	}
+	if (!ath_tx_setup(sc, ATH9K_WME_AC_VO)) {
+		DPRINTF(sc, ATH_DBG_FATAL,
+			"%s: unable to setup xmit queue for VO traffic\n",
+			__func__);
+		error = -EIO;
+		goto bad2;
+	}
+
+	sc->sc_rc = ath_rate_attach(ah);
+	if (sc->sc_rc == NULL) {
+		error = EIO;
+		goto bad2;
+	}
+
+	if (ath9k_hw_getcapability(ah, ATH9K_CAP_CIPHER,
+				   ATH9K_CIPHER_TKIP, NULL)) {
+		/*
+		 * Whether we should enable h/w TKIP MIC.
+		 * XXX: if we don't support WME TKIP MIC, then we wouldn't
+		 * report WMM capable, so it's always safe to turn on
+		 * TKIP MIC in this case.
+		 */
+		ath9k_hw_setcapability(sc->sc_ah, ATH9K_CAP_TKIP_MIC,
+				       0, 1, NULL);
+	}
+
+	/*
+	 * Check whether the separate key cache entries
+	 * are required to handle both tx+rx MIC keys.
+	 * With split mic keys the number of stations is limited
+	 * to 27 otherwise 59.
+	 */
+	if (ath9k_hw_getcapability(ah, ATH9K_CAP_CIPHER,
+				   ATH9K_CIPHER_TKIP, NULL)
+	    && ath9k_hw_getcapability(ah, ATH9K_CAP_CIPHER,
+				      ATH9K_CIPHER_MIC, NULL)
+	    && ath9k_hw_getcapability(ah, ATH9K_CAP_TKIP_SPLIT,
+				      0, NULL))
+		sc->sc_splitmic = 1;
+
+	/* turn on mcast key search if possible */
+	if (!ath9k_hw_getcapability(ah, ATH9K_CAP_MCAST_KEYSRCH, 0, NULL))
+		(void)ath9k_hw_setcapability(ah, ATH9K_CAP_MCAST_KEYSRCH, 1,
+					     1, NULL);
+
+	sc->sc_config.txpowlimit = ATH_TXPOWER_MAX;
+	sc->sc_config.txpowlimit_override = 0;
+
+	/* 11n Capabilities */
+	if (ah->ah_caps.hw_caps & ATH9K_HW_CAP_HT) {
+		sc->sc_txaggr = 1;
+		sc->sc_rxaggr = 1;
+	}
+
+	sc->sc_tx_chainmask = ah->ah_caps.tx_chainmask;
+	sc->sc_rx_chainmask = ah->ah_caps.rx_chainmask;
+
+	/* Configuration for rx chain detection */
+	sc->sc_rxchaindetect_ref = 0;
+	sc->sc_rxchaindetect_thresh5GHz = 35;
+	sc->sc_rxchaindetect_thresh2GHz = 35;
+	sc->sc_rxchaindetect_delta5GHz = 30;
+	sc->sc_rxchaindetect_delta2GHz = 30;
+
+	ath9k_hw_setcapability(ah, ATH9K_CAP_DIVERSITY, 1, true, NULL);
+	sc->sc_defant = ath9k_hw_getdefantenna(ah);
+
+	ath9k_hw_getmac(ah, sc->sc_myaddr);
+	if (ah->ah_caps.hw_caps & ATH9K_HW_CAP_BSSIDMASK) {
+		ath9k_hw_getbssidmask(ah, sc->sc_bssidmask);
+		ATH_SET_VAP_BSSID_MASK(sc->sc_bssidmask);
+		ath9k_hw_setbssidmask(ah, sc->sc_bssidmask);
+	}
+	sc->sc_slottime = ATH9K_SLOT_TIME_9;	/* default to short slot time */
+
+	/* initialize beacon slots */
+	for (i = 0; i < ARRAY_SIZE(sc->sc_bslot); i++)
+		sc->sc_bslot[i] = ATH_IF_ID_ANY;
+
+	/* save MISC configurations */
+	sc->sc_config.swBeaconProcess = 1;
+
+#ifdef CONFIG_SLOW_ANT_DIV
+	/* range is 40 - 255, we use something in the middle */
+	ath_slow_ant_div_init(&sc->sc_antdiv, sc, 0x127);
+#endif
+
+	return 0;
+bad2:
+	/* cleanup tx queues */
+	for (i = 0; i < ATH9K_NUM_TX_QUEUES; i++)
+		if (ATH_TXQ_SETUP(sc, i))
+			ath_tx_cleanupq(sc, &sc->sc_txq[i]);
+bad:
+	if (ah)
+		ath9k_hw_detach(ah);
+	return error;
+}
+
+void ath_deinit(struct ath_softc *sc)
+{
+	struct ath_hal *ah = sc->sc_ah;
+	int i;
+
+	DPRINTF(sc, ATH_DBG_CONFIG, "%s\n", __func__);
+
+	ath_stop(sc);
+	if (!sc->sc_invalid)
+		ath9k_hw_setpower(sc->sc_ah, ATH9K_PM_AWAKE);
+	ath_rate_detach(sc->sc_rc);
+	/* cleanup tx queues */
+	for (i = 0; i < ATH9K_NUM_TX_QUEUES; i++)
+		if (ATH_TXQ_SETUP(sc, i))
+			ath_tx_cleanupq(sc, &sc->sc_txq[i]);
+	ath9k_hw_detach(ah);
+}
+
+/*******************/
+/* Node Management */
+/*******************/
+
+struct ath_node *ath_node_attach(struct ath_softc *sc, u8 *addr, int if_id)
+{
+	struct ath_vap *avp;
+	struct ath_node *an;
+	DECLARE_MAC_BUF(mac);
+
+	avp = sc->sc_vaps[if_id];
+	ASSERT(avp != NULL);
+
+	/* mac80211 sta_notify callback is from an IRQ context, so no sleep */
+	an = kmalloc(sizeof(struct ath_node), GFP_ATOMIC);
+	if (an == NULL)
+		return NULL;
+	memzero(an, sizeof(*an));
+
+	an->an_sc = sc;
+	memcpy(an->an_addr, addr, ETH_ALEN);
+	atomic_set(&an->an_refcnt, 1);
+
+	/* set up per-node tx/rx state */
+	ath_tx_node_init(sc, an);
+	ath_rx_node_init(sc, an);
+
+	ath_chainmask_sel_init(sc, an);
+	ath_chainmask_sel_timerstart(&an->an_chainmask_sel);
+	list_add(&an->list, &sc->node_list);
+
+	return an;
+}
+
+void ath_node_detach(struct ath_softc *sc, struct ath_node *an, bool bh_flag)
+{
+	unsigned long flags;
+
+	DECLARE_MAC_BUF(mac);
+
+	ath_chainmask_sel_timerstop(&an->an_chainmask_sel);
+	an->an_flags |= ATH_NODE_CLEAN;
+	ath_tx_node_cleanup(sc, an, bh_flag);
+	ath_rx_node_cleanup(sc, an);
+
+	ath_tx_node_free(sc, an);
+	ath_rx_node_free(sc, an);
+
+	spin_lock_irqsave(&sc->node_lock, flags);
+
+	list_del(&an->list);
+
+	spin_unlock_irqrestore(&sc->node_lock, flags);
+
+	kfree(an);
+}
+
+/* Finds a node and increases the refcnt if found */
+
+struct ath_node *ath_node_get(struct ath_softc *sc, u8 *addr)
+{
+	struct ath_node *an = NULL, *an_found = NULL;
+
+	if (list_empty(&sc->node_list)) /* FIXME */
+		goto out;
+	list_for_each_entry(an, &sc->node_list, list) {
+		if (!compare_ether_addr(an->an_addr, addr)) {
+			atomic_inc(&an->an_refcnt);
+			an_found = an;
+			break;
+		}
+	}
+out:
+	return an_found;
+}
+
+/* Decrements the refcnt and if it drops to zero, detach the node */
+
+void ath_node_put(struct ath_softc *sc, struct ath_node *an, bool bh_flag)
+{
+	if (atomic_dec_and_test(&an->an_refcnt))
+		ath_node_detach(sc, an, bh_flag);
+}
+
+/* Finds a node, doesn't increment refcnt. Caller must hold sc->node_lock */
+struct ath_node *ath_node_find(struct ath_softc *sc, u8 *addr)
+{
+	struct ath_node *an = NULL, *an_found = NULL;
+
+	if (list_empty(&sc->node_list))
+		return NULL;
+
+	list_for_each_entry(an, &sc->node_list, list)
+		if (!compare_ether_addr(an->an_addr, addr)) {
+			an_found = an;
+			break;
+		}
+
+	return an_found;
+}
+
+/*
+ * Set up New Node
+ *
+ * Setup driver-specific state for a newly associated node.  This routine
+ * really only applies if compression or XR are enabled, there is no code
+ * covering any other cases.
+*/
+
+void ath_newassoc(struct ath_softc *sc,
+	struct ath_node *an, int isnew, int isuapsd)
+{
+	int tidno;
+
+	/* if station reassociates, tear down the aggregation state. */
+	if (!isnew) {
+		for (tidno = 0; tidno < WME_NUM_TID; tidno++) {
+			if (sc->sc_txaggr)
+				ath_tx_aggr_teardown(sc, an, tidno);
+			if (sc->sc_rxaggr)
+				ath_rx_aggr_teardown(sc, an, tidno);
+		}
+	}
+	an->an_flags = 0;
+}
+
+/**************/
+/* Encryption */
+/**************/
+
+void ath_key_reset(struct ath_softc *sc, u16 keyix, int freeslot)
+{
+	ath9k_hw_keyreset(sc->sc_ah, keyix);
+	if (freeslot)
+		clear_bit(keyix, sc->sc_keymap);
+}
+
+int ath_keyset(struct ath_softc *sc,
+	       u16 keyix,
+	       struct ath9k_keyval *hk,
+	       const u8 mac[ETH_ALEN])
+{
+	bool status;
+
+	status = ath9k_hw_set_keycache_entry(sc->sc_ah,
+		keyix, hk, mac, false);
+
+	return status != false;
+}
+
+/***********************/
+/* TX Power/Regulatory */
+/***********************/
+
+/*
+ *  Set Transmit power in HAL
+ *
+ *  This routine makes the actual HAL calls to set the new transmit power
+ *  limit.
+*/
+
+void ath_update_txpow(struct ath_softc *sc)
+{
+	struct ath_hal *ah = sc->sc_ah;
+	u32 txpow;
+
+	if (sc->sc_curtxpow != sc->sc_config.txpowlimit) {
+		ath9k_hw_set_txpowerlimit(ah, sc->sc_config.txpowlimit);
+		/* read back in case value is clamped */
+		ath9k_hw_getcapability(ah, ATH9K_CAP_TXPOW, 1, &txpow);
+		sc->sc_curtxpow = txpow;
+	}
+}
+
+/* Return the current country and domain information */
+void ath_get_currentCountry(struct ath_softc *sc,
+	struct ath9k_country_entry *ctry)
+{
+	ath9k_regd_get_current_country(sc->sc_ah, ctry);
+
+	/* If HAL not specific yet, since it is band dependent,
+	 * use the one we passed in. */
+	if (ctry->countryCode == CTRY_DEFAULT) {
+		ctry->iso[0] = 0;
+		ctry->iso[1] = 0;
+	} else if (ctry->iso[0] && ctry->iso[1]) {
+		if (!ctry->iso[2]) {
+			if (ath_outdoor)
+				ctry->iso[2] = 'O';
+			else
+				ctry->iso[2] = 'I';
+		}
+	}
+}
+
+/**************************/
+/* Slow Antenna Diversity */
+/**************************/
+
+void ath_slow_ant_div_init(struct ath_antdiv *antdiv,
+			   struct ath_softc *sc,
+			   int32_t rssitrig)
+{
+	int trig;
+
+	/* antdivf_rssitrig can range from 40 - 0xff */
+	trig = (rssitrig > 0xff) ? 0xff : rssitrig;
+	trig = (rssitrig < 40) ? 40 : rssitrig;
+
+	antdiv->antdiv_sc = sc;
+	antdiv->antdivf_rssitrig = trig;
+}
+
+void ath_slow_ant_div_start(struct ath_antdiv *antdiv,
+			    u8 num_antcfg,
+			    const u8 *bssid)
+{
+	antdiv->antdiv_num_antcfg =
+		num_antcfg < ATH_ANT_DIV_MAX_CFG ?
+		num_antcfg : ATH_ANT_DIV_MAX_CFG;
+	antdiv->antdiv_state = ATH_ANT_DIV_IDLE;
+	antdiv->antdiv_curcfg = 0;
+	antdiv->antdiv_bestcfg = 0;
+	antdiv->antdiv_laststatetsf = 0;
+
+	memcpy(antdiv->antdiv_bssid, bssid, sizeof(antdiv->antdiv_bssid));
+
+	antdiv->antdiv_start = 1;
+}
+
+void ath_slow_ant_div_stop(struct ath_antdiv *antdiv)
+{
+	antdiv->antdiv_start = 0;
+}
+
+static int32_t ath_find_max_val(int32_t *val,
+	u8 num_val, u8 *max_index)
+{
+	u32 MaxVal = *val++;
+	u32 cur_index = 0;
+
+	*max_index = 0;
+	while (++cur_index < num_val) {
+		if (*val > MaxVal) {
+			MaxVal = *val;
+			*max_index = cur_index;
+		}
+
+		val++;
+	}
+
+	return MaxVal;
+}
+
+void ath_slow_ant_div(struct ath_antdiv *antdiv,
+		      struct ieee80211_hdr *hdr,
+		      struct ath_rx_status *rx_stats)
+{
+	struct ath_softc *sc = antdiv->antdiv_sc;
+	struct ath_hal *ah = sc->sc_ah;
+	u64 curtsf = 0;
+	u8 bestcfg, curcfg = antdiv->antdiv_curcfg;
+	__le16 fc = hdr->frame_control;
+
+	if (antdiv->antdiv_start && ieee80211_is_beacon(fc)
+	    && !compare_ether_addr(hdr->addr3, antdiv->antdiv_bssid)) {
+		antdiv->antdiv_lastbrssi[curcfg] = rx_stats->rs_rssi;
+		antdiv->antdiv_lastbtsf[curcfg] = ath9k_hw_gettsf64(sc->sc_ah);
+		curtsf = antdiv->antdiv_lastbtsf[curcfg];
+	} else {
+		return;
+	}
+
+	switch (antdiv->antdiv_state) {
+	case ATH_ANT_DIV_IDLE:
+		if ((antdiv->antdiv_lastbrssi[curcfg] <
+		     antdiv->antdivf_rssitrig)
+		    && ((curtsf - antdiv->antdiv_laststatetsf) >
+			ATH_ANT_DIV_MIN_IDLE_US)) {
+
+			curcfg++;
+			if (curcfg == antdiv->antdiv_num_antcfg)
+				curcfg = 0;
+
+			if (!ath9k_hw_select_antconfig(ah, curcfg)) {
+				antdiv->antdiv_bestcfg = antdiv->antdiv_curcfg;
+				antdiv->antdiv_curcfg = curcfg;
+				antdiv->antdiv_laststatetsf = curtsf;
+				antdiv->antdiv_state = ATH_ANT_DIV_SCAN;
+			}
+		}
+		break;
+
+	case ATH_ANT_DIV_SCAN:
+		if ((curtsf - antdiv->antdiv_laststatetsf) <
+		    ATH_ANT_DIV_MIN_SCAN_US)
+			break;
+
+		curcfg++;
+		if (curcfg == antdiv->antdiv_num_antcfg)
+			curcfg = 0;
+
+		if (curcfg == antdiv->antdiv_bestcfg) {
+			ath_find_max_val(antdiv->antdiv_lastbrssi,
+				   antdiv->antdiv_num_antcfg, &bestcfg);
+			if (!ath9k_hw_select_antconfig(ah, bestcfg)) {
+				antdiv->antdiv_bestcfg = bestcfg;
+				antdiv->antdiv_curcfg = bestcfg;
+				antdiv->antdiv_laststatetsf = curtsf;
+				antdiv->antdiv_state = ATH_ANT_DIV_IDLE;
+			}
+		} else {
+			if (!ath9k_hw_select_antconfig(ah, curcfg)) {
+				antdiv->antdiv_curcfg = curcfg;
+				antdiv->antdiv_laststatetsf = curtsf;
+				antdiv->antdiv_state = ATH_ANT_DIV_SCAN;
+			}
+		}
+
+		break;
+	}
+}
+
+/***********************/
+/* Descriptor Handling */
+/***********************/
+
+/*
+ *  Set up DMA descriptors
+ *
+ *  This function will allocate both the DMA descriptor structure, and the
+ *  buffers it contains.  These are used to contain the descriptors used
+ *  by the system.
+*/
+
+int ath_descdma_setup(struct ath_softc *sc,
+		      struct ath_descdma *dd,
+		      struct list_head *head,
+		      const char *name,
+		      int nbuf,
+		      int ndesc)
+{
+#define	DS2PHYS(_dd, _ds)						\
+	((_dd)->dd_desc_paddr + ((caddr_t)(_ds) - (caddr_t)(_dd)->dd_desc))
+#define ATH_DESC_4KB_BOUND_CHECK(_daddr) ((((_daddr) & 0xFFF) > 0xF7F) ? 1 : 0)
+#define ATH_DESC_4KB_BOUND_NUM_SKIPPED(_len) ((_len) / 4096)
+
+	struct ath_desc *ds;
+	struct ath_buf *bf;
+	int i, bsize, error;
+
+	DPRINTF(sc, ATH_DBG_CONFIG, "%s: %s DMA: %u buffers %u desc/buf\n",
+		__func__, name, nbuf, ndesc);
+
+	/* ath_desc must be a multiple of DWORDs */
+	if ((sizeof(struct ath_desc) % 4) != 0) {
+		DPRINTF(sc, ATH_DBG_FATAL, "%s: ath_desc not DWORD aligned\n",
+			__func__);
+		ASSERT((sizeof(struct ath_desc) % 4) == 0);
+		error = -ENOMEM;
+		goto fail;
+	}
+
+	dd->dd_name = name;
+	dd->dd_desc_len = sizeof(struct ath_desc) * nbuf * ndesc;
+
+	/*
+	 * Need additional DMA memory because we can't use
+	 * descriptors that cross the 4K page boundary. Assume
+	 * one skipped descriptor per 4K page.
+	 */
+	if (!(sc->sc_ah->ah_caps.hw_caps & ATH9K_HW_CAP_4KB_SPLITTRANS)) {
+		u32 ndesc_skipped =
+			ATH_DESC_4KB_BOUND_NUM_SKIPPED(dd->dd_desc_len);
+		u32 dma_len;
+
+		while (ndesc_skipped) {
+			dma_len = ndesc_skipped * sizeof(struct ath_desc);
+			dd->dd_desc_len += dma_len;
+
+			ndesc_skipped = ATH_DESC_4KB_BOUND_NUM_SKIPPED(dma_len);
+		};
+	}
+
+	/* allocate descriptors */
+	dd->dd_desc = pci_alloc_consistent(sc->pdev,
+			      dd->dd_desc_len,
+			      &dd->dd_desc_paddr);
+	if (dd->dd_desc == NULL) {
+		error = -ENOMEM;
+		goto fail;
+	}
+	ds = dd->dd_desc;
+	DPRINTF(sc, ATH_DBG_CONFIG, "%s: %s DMA map: %p (%u) -> %llx (%u)\n",
+		__func__, dd->dd_name, ds, (u32) dd->dd_desc_len,
+		ito64(dd->dd_desc_paddr), /*XXX*/(u32) dd->dd_desc_len);
+
+	/* allocate buffers */
+	bsize = sizeof(struct ath_buf) * nbuf;
+	bf = kmalloc(bsize, GFP_KERNEL);
+	if (bf == NULL) {
+		error = -ENOMEM;
+		goto fail2;
+	}
+	memzero(bf, bsize);
+	dd->dd_bufptr = bf;
+
+	INIT_LIST_HEAD(head);
+	for (i = 0; i < nbuf; i++, bf++, ds += ndesc) {
+		bf->bf_desc = ds;
+		bf->bf_daddr = DS2PHYS(dd, ds);
+
+		if (!(sc->sc_ah->ah_caps.hw_caps &
+		      ATH9K_HW_CAP_4KB_SPLITTRANS)) {
+			/*
+			 * Skip descriptor addresses which can cause 4KB
+			 * boundary crossing (addr + length) with a 32 dword
+			 * descriptor fetch.
+			 */
+			while (ATH_DESC_4KB_BOUND_CHECK(bf->bf_daddr)) {
+				ASSERT((caddr_t) bf->bf_desc <
+				       ((caddr_t) dd->dd_desc +
+					dd->dd_desc_len));
+
+				ds += ndesc;
+				bf->bf_desc = ds;
+				bf->bf_daddr = DS2PHYS(dd, ds);
+			}
+		}
+		list_add_tail(&bf->list, head);
+	}
+	return 0;
+fail2:
+	pci_free_consistent(sc->pdev,
+		dd->dd_desc_len, dd->dd_desc, dd->dd_desc_paddr);
+fail:
+	memzero(dd, sizeof(*dd));
+	return error;
+#undef ATH_DESC_4KB_BOUND_CHECK
+#undef ATH_DESC_4KB_BOUND_NUM_SKIPPED
+#undef DS2PHYS
+}
+
+/*
+ *  Cleanup DMA descriptors
+ *
+ *  This function will free the DMA block that was allocated for the descriptor
+ *  pool.  Since this was allocated as one "chunk", it is freed in the same
+ *  manner.
+*/
+
+void ath_descdma_cleanup(struct ath_softc *sc,
+			 struct ath_descdma *dd,
+			 struct list_head *head)
+{
+	/* Free memory associated with descriptors */
+	pci_free_consistent(sc->pdev,
+		dd->dd_desc_len, dd->dd_desc, dd->dd_desc_paddr);
+
+	INIT_LIST_HEAD(head);
+	kfree(dd->dd_bufptr);
+	memzero(dd, sizeof(*dd));
+}
+
+/*************/
+/* Utilities */
+/*************/
+
+void ath_internal_reset(struct ath_softc *sc)
+{
+	ath_reset_start(sc, 0);
+	ath_reset(sc);
+	ath_reset_end(sc, 0);
+}
+
+int ath_get_hal_qnum(u16 queue, struct ath_softc *sc)
+{
+	int qnum;
+
+	switch (queue) {
+	case 0:
+		qnum = sc->sc_haltype2q[ATH9K_WME_AC_VO];
+		break;
+	case 1:
+		qnum = sc->sc_haltype2q[ATH9K_WME_AC_VI];
+		break;
+	case 2:
+		qnum = sc->sc_haltype2q[ATH9K_WME_AC_BE];
+		break;
+	case 3:
+		qnum = sc->sc_haltype2q[ATH9K_WME_AC_BK];
+		break;
+	default:
+		qnum = sc->sc_haltype2q[ATH9K_WME_AC_BE];
+		break;
+	}
+
+	return qnum;
+}
+
+int ath_get_mac80211_qnum(u32 queue, struct ath_softc *sc)
+{
+	int qnum;
+
+	switch (queue) {
+	case ATH9K_WME_AC_VO:
+		qnum = 0;
+		break;
+	case ATH9K_WME_AC_VI:
+		qnum = 1;
+		break;
+	case ATH9K_WME_AC_BE:
+		qnum = 2;
+		break;
+	case ATH9K_WME_AC_BK:
+		qnum = 3;
+		break;
+	default:
+		qnum = -1;
+		break;
+	}
+
+	return qnum;
+}
+
+
+/*
+ *  Expand time stamp to TSF
+ *
+ *  Extend 15-bit time stamp from rx descriptor to
+ *  a full 64-bit TSF using the current h/w TSF.
+*/
+
+u64 ath_extend_tsf(struct ath_softc *sc, u32 rstamp)
+{
+	u64 tsf;
+
+	tsf = ath9k_hw_gettsf64(sc->sc_ah);
+	if ((tsf & 0x7fff) < rstamp)
+		tsf -= 0x8000;
+	return (tsf & ~0x7fff) | rstamp;
+}
+
+/*
+ *  Set Default Antenna
+ *
+ *  Call into the HAL to set the default antenna to use.  Not really valid for
+ *  MIMO technology.
+*/
+
+void ath_setdefantenna(void *context, u32 antenna)
+{
+	struct ath_softc *sc = (struct ath_softc *)context;
+	struct ath_hal *ah = sc->sc_ah;
+
+	/* XXX block beacon interrupts */
+	ath9k_hw_setantenna(ah, antenna);
+	sc->sc_defant = antenna;
+	sc->sc_rxotherant = 0;
+}
+
+/*
+ * Set Slot Time
+ *
+ * This will wake up the chip if required, and set the slot time for the
+ * frame (maximum transmit time).  Slot time is assumed to be already set
+ * in the ATH object member sc_slottime
+*/
+
+void ath_setslottime(struct ath_softc *sc)
+{
+	ath9k_hw_setslottime(sc->sc_ah, sc->sc_slottime);
+	sc->sc_updateslot = OK;
+}
diff --git a/drivers/net/wireless/ath9k/core.h b/drivers/net/wireless/ath9k/core.h
new file mode 100644
index 000000000000..673b3d81133a
--- /dev/null
+++ b/drivers/net/wireless/ath9k/core.h
@@ -0,0 +1,1072 @@
+/*
+ * Copyright (c) 2008 Atheros Communications Inc.
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#ifndef CORE_H
+#define CORE_H
+
+#include <linux/version.h>
+#include <linux/autoconf.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/spinlock.h>
+#include <linux/errno.h>
+#include <linux/skbuff.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/ip.h>
+#include <linux/tcp.h>
+#include <linux/in.h>
+#include <linux/delay.h>
+#include <linux/wait.h>
+#include <linux/pci.h>
+#include <linux/interrupt.h>
+#include <linux/sched.h>
+#include <linux/list.h>
+#include <asm/byteorder.h>
+#include <linux/scatterlist.h>
+#include <asm/page.h>
+#include <net/mac80211.h>
+
+#include "ath9k.h"
+#include "rc.h"
+
+struct ath_node;
+
+/******************/
+/* Utility macros */
+/******************/
+
+/* Macro to expand scalars to 64-bit objects */
+
+#define	ito64(x) (sizeof(x) == 8) ?			\
+	(((unsigned long long int)(x)) & (0xff)) :	\
+	(sizeof(x) == 16) ?				\
+	(((unsigned long long int)(x)) & 0xffff) :	\
+	((sizeof(x) == 32) ?				\
+	 (((unsigned long long int)(x)) & 0xffffffff) : \
+	 (unsigned long long int)(x))
+
+/* increment with wrap-around */
+#define INCR(_l, _sz)   do {			\
+		(_l)++;				\
+		(_l) &= ((_sz) - 1);		\
+	} while (0)
+
+/* decrement with wrap-around */
+#define DECR(_l,  _sz)  do {			\
+		(_l)--;				\
+		(_l) &= ((_sz) - 1);		\
+	} while (0)
+
+#define A_MAX(a, b) ((a) > (b) ? (a) : (b))
+
+#define ASSERT(exp) do {			\
+		if (unlikely(!(exp))) {		\
+			BUG();			\
+		}				\
+	} while (0)
+
+/* XXX: remove */
+#define memzero(_buf, _len) memset(_buf, 0, _len)
+
+#define get_dma_mem_context(var, field) (&((var)->field))
+#define copy_dma_mem_context(dst, src)  (*dst = *src)
+
+#define ATH9K_BH_STATUS_INTACT		0
+#define ATH9K_BH_STATUS_CHANGE		1
+
+#define	ATH_TXQ_SETUP(sc, i)        ((sc)->sc_txqsetup & (1<<i))
+
+static inline unsigned long get_timestamp(void)
+{
+	return ((jiffies / HZ) * 1000) + (jiffies % HZ) * (1000 / HZ);
+}
+
+/*************/
+/* Debugging */
+/*************/
+
+enum ATH_DEBUG {
+	ATH_DBG_RESET		= 0x00000001,
+	ATH_DBG_PHY_IO		= 0x00000002,
+	ATH_DBG_REG_IO		= 0x00000004,
+	ATH_DBG_QUEUE		= 0x00000008,
+	ATH_DBG_EEPROM		= 0x00000010,
+	ATH_DBG_NF_CAL		= 0x00000020,
+	ATH_DBG_CALIBRATE	= 0x00000040,
+	ATH_DBG_CHANNEL		= 0x00000080,
+	ATH_DBG_INTERRUPT	= 0x00000100,
+	ATH_DBG_REGULATORY	= 0x00000200,
+	ATH_DBG_ANI		= 0x00000400,
+	ATH_DBG_POWER_MGMT	= 0x00000800,
+	ATH_DBG_XMIT		= 0x00001000,
+	ATH_DBG_BEACON		= 0x00002000,
+	ATH_DBG_RATE		= 0x00004000,
+	ATH_DBG_CONFIG		= 0x00008000,
+	ATH_DBG_KEYCACHE	= 0x00010000,
+	ATH_DBG_AGGR		= 0x00020000,
+	ATH_DBG_FATAL		= 0x00040000,
+	ATH_DBG_ANY		= 0xffffffff
+};
+
+#define DBG_DEFAULT (ATH_DBG_FATAL)
+
+#define	DPRINTF(sc, _m, _fmt, ...) do {			\
+		if (sc->sc_debug & (_m))                \
+			printk(_fmt , ##__VA_ARGS__);	\
+	} while (0)
+
+/***************************/
+/* Load-time Configuration */
+/***************************/
+
+/* Per-instance load-time (note: NOT run-time) configurations
+ * for Atheros Device */
+struct ath_config {
+	u32 ath_aggr_prot;
+	u16 txpowlimit;
+	u16 txpowlimit_override;
+	u8 cabqReadytime; /* Cabq Readytime % */
+	u8 swBeaconProcess; /* Process received beacons in SW (vs HW) */
+};
+
+/***********************/
+/* Chainmask Selection */
+/***********************/
+
+#define ATH_CHAINMASK_SEL_TIMEOUT	   6000
+/* Default - Number of last RSSI values that is used for
+ * chainmask selection */
+#define ATH_CHAINMASK_SEL_RSSI_CNT	   10
+/* Means use 3x3 chainmask instead of configured chainmask */
+#define ATH_CHAINMASK_SEL_3X3		   7
+/* Default - Rssi threshold below which we have to switch to 3x3 */
+#define ATH_CHAINMASK_SEL_UP_RSSI_THRES	   20
+/* Default - Rssi threshold above which we have to switch to
+ * user configured values */
+#define ATH_CHAINMASK_SEL_DOWN_RSSI_THRES  35
+/* Struct to store the chainmask select related info */
+struct ath_chainmask_sel {
+	struct timer_list timer;
+	int cur_tx_mask; 	/* user configured or 3x3 */
+	int cur_rx_mask; 	/* user configured or 3x3 */
+	int tx_avgrssi;
+	u8 switch_allowed:1, 	/* timer will set this */
+	   cm_sel_enabled : 1;
+};
+
+int ath_chainmask_sel_logic(struct ath_softc *sc, struct ath_node *an);
+void ath_update_chainmask(struct ath_softc *sc, int is_ht);
+
+/*************************/
+/* Descriptor Management */
+/*************************/
+
+/* Number of descriptors per buffer. The only case where we see skbuff
+chains is due to FF aggregation in the driver. */
+#define	ATH_TXDESC	    1
+/* if there's more fragment for this MSDU */
+#define ATH_BF_MORE_MPDU    1
+#define ATH_TXBUF_RESET(_bf) do {				\
+		(_bf)->bf_status = 0;				\
+		(_bf)->bf_lastbf = NULL;			\
+		(_bf)->bf_lastfrm = NULL;			\
+		(_bf)->bf_next = NULL;				\
+		memzero(&((_bf)->bf_state),			\
+			    sizeof(struct ath_buf_state));	\
+	} while (0)
+
+struct ath_buf_state {
+	int bfs_nframes;	/* # frames in aggregate */
+	u16 bfs_al;		/* length of aggregate */
+	u16 bfs_frmlen;		/* length of frame */
+	int bfs_seqno;		/* sequence number */
+	int bfs_tidno;		/* tid of this frame */
+	int bfs_retries;	/* current retries */
+	struct ath_rc_series bfs_rcs[4];	/* rate series */
+	u8 bfs_isdata:1;	/* is a data frame/aggregate */
+	u8 bfs_isaggr:1;	/* is an aggregate */
+	u8 bfs_isampdu:1;	/* is an a-mpdu, aggregate or not */
+	u8 bfs_ht:1;		/* is an HT frame */
+	u8 bfs_isretried:1;	/* is retried */
+	u8 bfs_isxretried:1;	/* is excessive retried */
+	u8 bfs_shpreamble:1;	/* is short preamble */
+	u8 bfs_isbar:1;		/* is a BAR */
+	u8 bfs_ispspoll:1;	/* is a PS-Poll */
+	u8 bfs_aggrburst:1;	/* is a aggr burst */
+	u8 bfs_calcairtime:1;	/* requests airtime be calculated
+				when set for tx frame */
+	int bfs_rifsburst_elem;	/* RIFS burst/bar */
+	int bfs_nrifsubframes;	/* # of elements in burst */
+	/* key type use to encrypt this frame */
+	enum ath9k_key_type bfs_keytype;
+};
+
+#define bf_nframes      	bf_state.bfs_nframes
+#define bf_al           	bf_state.bfs_al
+#define bf_frmlen       	bf_state.bfs_frmlen
+#define bf_retries      	bf_state.bfs_retries
+#define bf_seqno        	bf_state.bfs_seqno
+#define bf_tidno        	bf_state.bfs_tidno
+#define bf_rcs          	bf_state.bfs_rcs
+#define bf_isdata       	bf_state.bfs_isdata
+#define bf_isaggr       	bf_state.bfs_isaggr
+#define bf_isampdu      	bf_state.bfs_isampdu
+#define bf_ht           	bf_state.bfs_ht
+#define bf_isretried    	bf_state.bfs_isretried
+#define bf_isxretried   	bf_state.bfs_isxretried
+#define bf_shpreamble   	bf_state.bfs_shpreamble
+#define bf_rifsburst_elem  	bf_state.bfs_rifsburst_elem
+#define bf_nrifsubframes  	bf_state.bfs_nrifsubframes
+#define bf_keytype      	bf_state.bfs_keytype
+#define bf_isbar        	bf_state.bfs_isbar
+#define bf_ispspoll     	bf_state.bfs_ispspoll
+#define bf_aggrburst    	bf_state.bfs_aggrburst
+#define bf_calcairtime  	bf_state.bfs_calcairtime
+
+/*
+ * Abstraction of a contiguous buffer to transmit/receive.  There is only
+ * a single hw descriptor encapsulated here.
+ */
+
+struct ath_buf {
+	struct list_head list;
+	struct list_head *last;
+	struct ath_buf *bf_lastbf;	/* last buf of this unit (a frame or
+					   an aggregate) */
+	struct ath_buf *bf_lastfrm;	/* last buf of this frame */
+	struct ath_buf *bf_next;	/* next subframe in the aggregate */
+	struct ath_buf *bf_rifslast;	/* last buf for RIFS burst */
+	void *bf_mpdu;			/* enclosing frame structure */
+	void *bf_node;			/* pointer to the node */
+	struct ath_desc *bf_desc;	/* virtual addr of desc */
+	dma_addr_t bf_daddr;		/* physical addr of desc */
+	dma_addr_t bf_buf_addr;		/* physical addr of data buffer */
+	u32 bf_status;
+	u16 bf_flags;			/* tx descriptor flags */
+	struct ath_buf_state bf_state;	/* buffer state */
+	dma_addr_t bf_dmacontext;
+};
+
+/*
+ * reset the rx buffer.
+ * any new fields added to the athbuf and require
+ * reset need to be added to this macro.
+ * currently bf_status is the only one requires that
+ * requires reset.
+ */
+#define ATH_RXBUF_RESET(_bf)    ((_bf)->bf_status = 0)
+
+/* hw processing complete, desc processed by hal */
+#define ATH_BUFSTATUS_DONE      0x00000001
+/* hw processing complete, desc hold for hw */
+#define ATH_BUFSTATUS_STALE     0x00000002
+/* Rx-only: OS is done with this packet and it's ok to queued it to hw */
+#define ATH_BUFSTATUS_FREE      0x00000004
+
+/* DMA state for tx/rx descriptors */
+
+struct ath_descdma {
+	const char *dd_name;
+	struct ath_desc *dd_desc;	/* descriptors  */
+	dma_addr_t dd_desc_paddr;	/* physical addr of dd_desc  */
+	u32 dd_desc_len;		/* size of dd_desc  */
+	struct ath_buf *dd_bufptr;	/* associated buffers */
+	dma_addr_t dd_dmacontext;
+};
+
+/* Abstraction of a received RX MPDU/MMPDU, or a RX fragment */
+
+struct ath_rx_context {
+	struct ath_buf *ctx_rxbuf;	/* associated ath_buf for rx */
+};
+#define ATH_RX_CONTEXT(skb) ((struct ath_rx_context *)skb->cb)
+
+int ath_descdma_setup(struct ath_softc *sc,
+		      struct ath_descdma *dd,
+		      struct list_head *head,
+		      const char *name,
+		      int nbuf,
+		      int ndesc);
+int ath_desc_alloc(struct ath_softc *sc);
+void ath_desc_free(struct ath_softc *sc);
+void ath_descdma_cleanup(struct ath_softc *sc,
+			 struct ath_descdma *dd,
+			 struct list_head *head);
+
+/******/
+/* RX */
+/******/
+
+#define ATH_MAX_ANTENNA          3
+#define ATH_RXBUF                512
+#define ATH_RX_TIMEOUT           40      /* 40 milliseconds */
+#define WME_NUM_TID              16
+#define IEEE80211_BAR_CTL_TID_M  0xF000  /* tid mask */
+#define IEEE80211_BAR_CTL_TID_S  2       /* tid shift */
+
+enum ATH_RX_TYPE {
+	ATH_RX_NON_CONSUMED = 0,
+	ATH_RX_CONSUMED
+};
+
+/* per frame rx status block */
+struct ath_recv_status {
+	u64 tsf;		/* mac tsf */
+	int8_t rssi;		/* RSSI (noise floor ajusted) */
+	int8_t rssictl[ATH_MAX_ANTENNA];	/* RSSI (noise floor ajusted) */
+	int8_t rssiextn[ATH_MAX_ANTENNA];	/* RSSI (noise floor ajusted) */
+	int8_t abs_rssi;	/* absolute RSSI */
+	u8 rateieee;		/* data rate received (IEEE rate code) */
+	u8 ratecode;		/* phy rate code */
+	int rateKbps;		/* data rate received (Kbps) */
+	int antenna;		/* rx antenna */
+	int flags;		/* status of associated skb */
+#define ATH_RX_FCS_ERROR        0x01
+#define ATH_RX_MIC_ERROR        0x02
+#define ATH_RX_DECRYPT_ERROR    0x04
+#define ATH_RX_RSSI_VALID       0x08
+/* if any of ctl,extn chainrssis are valid */
+#define ATH_RX_CHAIN_RSSI_VALID 0x10
+/* if extn chain rssis are valid */
+#define ATH_RX_RSSI_EXTN_VALID  0x20
+/* set if 40Mhz, clear if 20Mhz */
+#define ATH_RX_40MHZ            0x40
+/* set if short GI, clear if full GI */
+#define ATH_RX_SHORT_GI         0x80
+};
+
+struct ath_rxbuf {
+	struct sk_buff *rx_wbuf;
+	unsigned long rx_time;			/* system time when received */
+	struct ath_recv_status rx_status;	/* cached rx status */
+};
+
+/* Per-TID aggregate receiver state for a node */
+struct ath_arx_tid {
+	struct ath_node *an;
+	struct ath_rxbuf *rxbuf;	/* re-ordering buffer */
+	struct timer_list timer;
+	spinlock_t tidlock;
+	int baw_head;			/* seq_next at head */
+	int baw_tail;			/* tail of block-ack window */
+	int seq_reset;			/* need to reset start sequence */
+	int addba_exchangecomplete;
+	u16 seq_next;			/* next expected sequence */
+	u16 baw_size;			/* block-ack window size */
+};
+
+/* Per-node receiver aggregate state */
+struct ath_arx {
+	struct ath_arx_tid tid[WME_NUM_TID];
+};
+
+int ath_startrecv(struct ath_softc *sc);
+bool ath_stoprecv(struct ath_softc *sc);
+void ath_flushrecv(struct ath_softc *sc);
+u32 ath_calcrxfilter(struct ath_softc *sc);
+void ath_rx_node_init(struct ath_softc *sc, struct ath_node *an);
+void ath_rx_node_free(struct ath_softc *sc, struct ath_node *an);
+void ath_rx_node_cleanup(struct ath_softc *sc, struct ath_node *an);
+void ath_handle_rx_intr(struct ath_softc *sc);
+int ath_rx_init(struct ath_softc *sc, int nbufs);
+void ath_rx_cleanup(struct ath_softc *sc);
+int ath_rx_tasklet(struct ath_softc *sc, int flush);
+int ath_rx_input(struct ath_softc *sc,
+		 struct ath_node *node,
+		 int is_ampdu,
+		 struct sk_buff *skb,
+		 struct ath_recv_status *rx_status,
+		 enum ATH_RX_TYPE *status);
+int ath__rx_indicate(struct ath_softc *sc,
+		    struct sk_buff *skb,
+		    struct ath_recv_status *status,
+		    u16 keyix);
+int ath_rx_subframe(struct ath_node *an, struct sk_buff *skb,
+		    struct ath_recv_status *status);
+
+/******/
+/* TX */
+/******/
+
+#define ATH_FRAG_PER_MSDU       1
+#define ATH_TXBUF               (512/ATH_FRAG_PER_MSDU)
+/* max number of transmit attempts (tries) */
+#define ATH_TXMAXTRY            13
+/* max number of 11n transmit attempts (tries) */
+#define ATH_11N_TXMAXTRY        10
+/* max number of tries for management and control frames */
+#define ATH_MGT_TXMAXTRY        4
+#define WME_BA_BMP_SIZE         64
+#define WME_MAX_BA              WME_BA_BMP_SIZE
+#define ATH_TID_MAX_BUFS        (2 * WME_MAX_BA)
+#define TID_TO_WME_AC(_tid)				\
+	((((_tid) == 0) || ((_tid) == 3)) ? WME_AC_BE :	\
+	 (((_tid) == 1) || ((_tid) == 2)) ? WME_AC_BK :	\
+	 (((_tid) == 4) || ((_tid) == 5)) ? WME_AC_VI :	\
+	 WME_AC_VO)
+
+
+/* Wireless Multimedia Extension Defines */
+#define WME_AC_BE               0 /* best effort */
+#define WME_AC_BK               1 /* background */
+#define WME_AC_VI               2 /* video */
+#define WME_AC_VO               3 /* voice */
+#define WME_NUM_AC              4
+
+enum ATH_SM_PWRSAV{
+	ATH_SM_ENABLE,
+	ATH_SM_PWRSAV_STATIC,
+	ATH_SM_PWRSAV_DYNAMIC,
+};
+
+/*
+ * Data transmit queue state.  One of these exists for each
+ * hardware transmit queue.  Packets sent to us from above
+ * are assigned to queues based on their priority.  Not all
+ * devices support a complete set of hardware transmit queues.
+ * For those devices the array sc_ac2q will map multiple
+ * priorities to fewer hardware queues (typically all to one
+ * hardware queue).
+ */
+struct ath_txq {
+	u32 axq_qnum;			/* hardware q number */
+	u32 *axq_link;			/* link ptr in last TX desc */
+	struct list_head axq_q;		/* transmit queue */
+	spinlock_t axq_lock;
+	unsigned long axq_lockflags;	/* intr state when must cli */
+	u32 axq_depth;			/* queue depth */
+	u8 axq_aggr_depth;		/* aggregates queued */
+	u32 axq_totalqueued;		/* total ever queued */
+
+	/* count to determine if descriptor should generate int on this txq. */
+	u32 axq_intrcnt;
+
+	bool stopped;			/* Is mac80211 queue stopped ? */
+	struct ath_buf *axq_linkbuf;	/* virtual addr of last buffer*/
+
+	/* first desc of the last descriptor that contains CTS */
+	struct ath_desc *axq_lastdsWithCTS;
+
+	/* final desc of the gating desc that determines whether
+	   lastdsWithCTS has been DMA'ed or not */
+	struct ath_desc *axq_gatingds;
+
+	struct list_head axq_acq;
+};
+
+/* per TID aggregate tx state for a destination */
+struct ath_atx_tid {
+	struct list_head list;		/* round-robin tid entry */
+	struct list_head buf_q;		/* pending buffers */
+	struct ath_node *an;
+	struct ath_atx_ac *ac;
+	struct ath_buf *tx_buf[ATH_TID_MAX_BUFS]; /* active tx frames */
+	u16 seq_start;
+	u16 seq_next;
+	u16 baw_size;
+	int tidno;
+	int baw_head;			/* first un-acked tx buffer */
+	int baw_tail;			/* next unused tx buffer slot */
+	int sched;
+	int paused;
+	int cleanup_inprogress;
+	u32 addba_exchangecomplete:1;
+	int32_t addba_exchangeinprogress;
+	int addba_exchangeattempts;
+};
+
+/* per access-category aggregate tx state for a destination */
+struct ath_atx_ac {
+	int sched;			/* dest-ac is scheduled */
+	int qnum;			/* H/W queue number associated
+					   with this AC */
+	struct list_head list;		/* round-robin txq entry */
+	struct list_head tid_q;		/* queue of TIDs with buffers */
+};
+
+/* per dest tx state */
+struct ath_atx {
+	struct ath_atx_tid tid[WME_NUM_TID];
+	struct ath_atx_ac ac[WME_NUM_AC];
+};
+
+/* per-frame tx control block */
+struct ath_tx_control {
+	struct ath_node *an;
+	int if_id;
+	int qnum;
+	u32 ht:1;
+	u32 ps:1;
+	u32 use_minrate:1;
+	enum ath9k_pkt_type atype;
+	enum ath9k_key_type keytype;
+	u32 flags;
+	u16 seqno;
+	u16 tidno;
+	u16 txpower;
+	u16 frmlen;
+	u32 keyix;
+	int min_rate;
+	int mcast_rate;
+	u16 nextfraglen;
+	struct ath_softc *dev;
+	dma_addr_t dmacontext;
+};
+
+/* per frame tx status block */
+struct ath_xmit_status {
+	int retries;	/* number of retries to successufully
+			   transmit this frame */
+	int flags;	/* status of transmit */
+#define ATH_TX_ERROR        0x01
+#define ATH_TX_XRETRY       0x02
+#define ATH_TX_BAR          0x04
+};
+
+struct ath_tx_stat {
+	int rssi;		/* RSSI (noise floor ajusted) */
+	int rssictl[ATH_MAX_ANTENNA];	/* RSSI (noise floor ajusted) */
+	int rssiextn[ATH_MAX_ANTENNA];	/* RSSI (noise floor ajusted) */
+	int rateieee;		/* data rate xmitted (IEEE rate code) */
+	int rateKbps;		/* data rate xmitted (Kbps) */
+	int ratecode;		/* phy rate code */
+	int flags;		/* validity flags */
+/* if any of ctl,extn chain rssis are valid */
+#define ATH_TX_CHAIN_RSSI_VALID 0x01
+/* if extn chain rssis are valid */
+#define ATH_TX_RSSI_EXTN_VALID  0x02
+	u32 airtime;	/* time on air per final tx rate */
+};
+
+struct ath_txq *ath_txq_setup(struct ath_softc *sc, int qtype, int subtype);
+void ath_tx_cleanupq(struct ath_softc *sc, struct ath_txq *txq);
+int ath_tx_setup(struct ath_softc *sc, int haltype);
+void ath_draintxq(struct ath_softc *sc, bool retry_tx);
+void ath_tx_draintxq(struct ath_softc *sc,
+	struct ath_txq *txq, bool retry_tx);
+void ath_tx_node_init(struct ath_softc *sc, struct ath_node *an);
+void ath_tx_node_cleanup(struct ath_softc *sc,
+	struct ath_node *an, bool bh_flag);
+void ath_tx_node_free(struct ath_softc *sc, struct ath_node *an);
+void ath_txq_schedule(struct ath_softc *sc, struct ath_txq *txq);
+int ath_tx_init(struct ath_softc *sc, int nbufs);
+int ath_tx_cleanup(struct ath_softc *sc);
+int ath_tx_get_qnum(struct ath_softc *sc, int qtype, int haltype);
+int ath_txq_update(struct ath_softc *sc, int qnum,
+		   struct ath9k_tx_queue_info *q);
+int ath_tx_start(struct ath_softc *sc, struct sk_buff *skb);
+void ath_tx_tasklet(struct ath_softc *sc);
+u32 ath_txq_depth(struct ath_softc *sc, int qnum);
+u32 ath_txq_aggr_depth(struct ath_softc *sc, int qnum);
+void ath_notify_txq_status(struct ath_softc *sc, u16 queue_depth);
+void ath_tx_complete(struct ath_softc *sc, struct sk_buff *skb,
+		     struct ath_xmit_status *tx_status, struct ath_node *an);
+
+/**********************/
+/* Node / Aggregation */
+/**********************/
+
+/* indicates the node is clened up */
+#define ATH_NODE_CLEAN          0x1
+/* indicates the node is 80211 power save */
+#define ATH_NODE_PWRSAVE        0x2
+
+#define ADDBA_TIMEOUT              200 /* 200 milliseconds */
+#define ADDBA_EXCHANGE_ATTEMPTS    10
+#define ATH_AGGR_DELIM_SZ          4   /* delimiter size   */
+#define ATH_AGGR_MINPLEN           256 /* in bytes, minimum packet length */
+/* number of delimiters for encryption padding */
+#define ATH_AGGR_ENCRYPTDELIM      10
+/* minimum h/w qdepth to be sustained to maximize aggregation */
+#define ATH_AGGR_MIN_QDEPTH        2
+#define ATH_AMPDU_SUBFRAME_DEFAULT 32
+#define IEEE80211_SEQ_SEQ_SHIFT    4
+#define IEEE80211_SEQ_MAX          4096
+#define IEEE80211_MIN_AMPDU_BUF    0x8
+
+/* return whether a bit at index _n in bitmap _bm is set
+ * _sz is the size of the bitmap  */
+#define ATH_BA_ISSET(_bm, _n)  (((_n) < (WME_BA_BMP_SIZE)) &&		\
+				((_bm)[(_n) >> 5] & (1 << ((_n) & 31))))
+
+/* return block-ack bitmap index given sequence and starting sequence */
+#define ATH_BA_INDEX(_st, _seq) (((_seq) - (_st)) & (IEEE80211_SEQ_MAX - 1))
+
+/* returns delimiter padding required given the packet length */
+#define ATH_AGGR_GET_NDELIM(_len)					\
+	(((((_len) + ATH_AGGR_DELIM_SZ) < ATH_AGGR_MINPLEN) ?           \
+	  (ATH_AGGR_MINPLEN - (_len) - ATH_AGGR_DELIM_SZ) : 0) >> 2)
+
+#define BAW_WITHIN(_start, _bawsz, _seqno) \
+	((((_seqno) - (_start)) & 4095) < (_bawsz))
+
+#define ATH_DS_BA_SEQ(_ds)               ((_ds)->ds_us.tx.ts_seqnum)
+#define ATH_DS_BA_BITMAP(_ds)            (&(_ds)->ds_us.tx.ba_low)
+#define ATH_DS_TX_BA(_ds)	((_ds)->ds_us.tx.ts_flags & ATH9K_TX_BA)
+#define ATH_AN_2_TID(_an, _tidno)        (&(_an)->an_aggr.tx.tid[(_tidno)])
+
+enum ATH_AGGR_STATUS {
+	ATH_AGGR_DONE,
+	ATH_AGGR_BAW_CLOSED,
+	ATH_AGGR_LIMITED,
+	ATH_AGGR_SHORTPKT,
+	ATH_AGGR_8K_LIMITED,
+};
+
+enum ATH_AGGR_CHECK {
+	AGGR_NOT_REQUIRED,
+	AGGR_REQUIRED,
+	AGGR_CLEANUP_PROGRESS,
+	AGGR_EXCHANGE_PROGRESS,
+	AGGR_EXCHANGE_DONE
+};
+
+struct aggr_rifs_param {
+	int param_max_frames;
+	int param_max_len;
+	int param_rl;
+	int param_al;
+	struct ath_rc_series *param_rcs;
+};
+
+/* Per-node aggregation state */
+struct ath_node_aggr {
+	struct ath_atx tx;	/* node transmit state */
+	struct ath_arx rx;	/* node receive state */
+};
+
+/* driver-specific node state */
+struct ath_node {
+	struct list_head list;
+	struct ath_softc *an_sc;
+	atomic_t an_refcnt;
+	struct ath_chainmask_sel an_chainmask_sel;
+	struct ath_node_aggr an_aggr;
+	u8 an_smmode; /* SM Power save mode */
+	u8 an_flags;
+	u8 an_addr[ETH_ALEN];
+};
+
+void ath_tx_resume_tid(struct ath_softc *sc,
+	struct ath_atx_tid *tid);
+enum ATH_AGGR_CHECK ath_tx_aggr_check(struct ath_softc *sc,
+	struct ath_node *an, u8 tidno);
+void ath_tx_aggr_teardown(struct ath_softc *sc,
+	struct ath_node *an, u8 tidno);
+void ath_rx_aggr_teardown(struct ath_softc *sc,
+	struct ath_node *an, u8 tidno);
+int ath_rx_aggr_start(struct ath_softc *sc,
+		      const u8 *addr,
+		      u16 tid,
+		      u16 *ssn);
+int ath_rx_aggr_stop(struct ath_softc *sc,
+		     const u8 *addr,
+		     u16 tid);
+int ath_tx_aggr_start(struct ath_softc *sc,
+		      const u8 *addr,
+		      u16 tid,
+		      u16 *ssn);
+int ath_tx_aggr_stop(struct ath_softc *sc,
+		     const u8 *addr,
+		     u16 tid);
+void ath_newassoc(struct ath_softc *sc,
+	struct ath_node *node, int isnew, int isuapsd);
+struct ath_node *ath_node_attach(struct ath_softc *sc,
+	u8 addr[ETH_ALEN], int if_id);
+void ath_node_detach(struct ath_softc *sc, struct ath_node *an, bool bh_flag);
+struct ath_node *ath_node_get(struct ath_softc *sc, u8 addr[ETH_ALEN]);
+void ath_node_put(struct ath_softc *sc, struct ath_node *an, bool bh_flag);
+struct ath_node *ath_node_find(struct ath_softc *sc, u8 *addr);
+
+/*******************/
+/* Beacon Handling */
+/*******************/
+
+/*
+ * Regardless of the number of beacons we stagger, (i.e. regardless of the
+ * number of BSSIDs) if a given beacon does not go out even after waiting this
+ * number of beacon intervals, the game's up.
+ */
+#define BSTUCK_THRESH           	(9 * ATH_BCBUF)
+#define	ATH_BCBUF               	4   /* number of beacon buffers */
+#define ATH_DEFAULT_BINTVAL     	100 /* default beacon interval in TU */
+#define ATH_DEFAULT_BMISS_LIMIT 	10
+#define	ATH_BEACON_AIFS_DEFAULT		0  /* Default aifs for ap beacon q */
+#define	ATH_BEACON_CWMIN_DEFAULT	0  /* Default cwmin for ap beacon q */
+#define	ATH_BEACON_CWMAX_DEFAULT	0  /* Default cwmax for ap beacon q */
+#define IEEE80211_MS_TO_TU(x)           (((x) * 1000) / 1024)
+
+/* beacon configuration */
+struct ath_beacon_config {
+	u16 beacon_interval;
+	u16 listen_interval;
+	u16 dtim_period;
+	u16 bmiss_timeout;
+	u8 dtim_count;
+	u8 tim_offset;
+	union {
+		u64 last_tsf;
+		u8 last_tstamp[8];
+	} u; /* last received beacon/probe response timestamp of this BSS. */
+};
+
+/* offsets in a beacon frame for
+ * quick acess of beacon content by low-level driver */
+struct ath_beacon_offset {
+	u8 *bo_tim;	/* start of atim/dtim */
+};
+
+void ath9k_beacon_tasklet(unsigned long data);
+void ath_beacon_config(struct ath_softc *sc, int if_id);
+int ath_beaconq_setup(struct ath_hal *ah);
+int ath_beacon_alloc(struct ath_softc *sc, int if_id);
+void ath_bstuck_process(struct ath_softc *sc);
+void ath_beacon_tasklet(struct ath_softc *sc, int *needmark);
+void ath_beacon_free(struct ath_softc *sc);
+void ath_beacon_return(struct ath_softc *sc, struct ath_vap *avp);
+void ath_beacon_sync(struct ath_softc *sc, int if_id);
+void ath_update_beacon_info(struct ath_softc *sc, int avgbrssi);
+void ath_get_beaconconfig(struct ath_softc *sc,
+			  int if_id,
+			  struct ath_beacon_config *conf);
+int ath_update_beacon(struct ath_softc *sc,
+		      int if_id,
+		      struct ath_beacon_offset *bo,
+		      struct sk_buff *skb,
+		      int mcast);
+/********/
+/* VAPs */
+/********/
+
+/*
+ * Define the scheme that we select MAC address for multiple
+ * BSS on the same radio. The very first VAP will just use the MAC
+ * address from the EEPROM. For the next 3 VAPs, we set the
+ * U/L bit (bit 1) in MAC address, and use the next two bits as the
+ * index of the VAP.
+ */
+
+#define ATH_SET_VAP_BSSID_MASK(bssid_mask) \
+	((bssid_mask)[0] &= ~(((ATH_BCBUF-1)<<2)|0x02))
+
+/* VAP configuration (from protocol layer) */
+struct ath_vap_config {
+	u32 av_fixed_rateset;
+	u32 av_fixed_retryset;
+};
+
+/* driver-specific vap state */
+struct ath_vap {
+	struct ieee80211_vif *av_if_data;
+	enum ath9k_opmode av_opmode;	/* VAP operational mode */
+	struct ath_buf *av_bcbuf;	/* beacon buffer */
+	struct ath_beacon_offset av_boff; /* dynamic update state */
+	struct ath_tx_control av_btxctl;  /* txctl information for beacon */
+	int av_bslot;			/* beacon slot index */
+	struct ath_txq av_mcastq;	/* multicast transmit queue */
+	struct ath_vap_config av_config;/* vap configuration parameters*/
+	struct ath_rate_node *rc_node;
+};
+
+int ath_vap_attach(struct ath_softc *sc,
+		   int if_id,
+		   struct ieee80211_vif *if_data,
+		   enum ath9k_opmode opmode);
+int ath_vap_detach(struct ath_softc *sc, int if_id);
+int ath_vap_config(struct ath_softc *sc,
+	int if_id, struct ath_vap_config *if_config);
+int ath_vap_listen(struct ath_softc *sc, int if_id);
+
+/*********************/
+/* Antenna diversity */
+/*********************/
+
+#define ATH_ANT_DIV_MAX_CFG      2
+#define ATH_ANT_DIV_MIN_IDLE_US  1000000  /* us */
+#define ATH_ANT_DIV_MIN_SCAN_US  50000	  /* us */
+
+enum ATH_ANT_DIV_STATE{
+	ATH_ANT_DIV_IDLE,
+	ATH_ANT_DIV_SCAN,	/* evaluating antenna */
+};
+
+struct ath_antdiv {
+	struct ath_softc *antdiv_sc;
+	u8 antdiv_start;
+	enum ATH_ANT_DIV_STATE antdiv_state;
+	u8 antdiv_num_antcfg;
+	u8 antdiv_curcfg;
+	u8 antdiv_bestcfg;
+	int32_t antdivf_rssitrig;
+	int32_t antdiv_lastbrssi[ATH_ANT_DIV_MAX_CFG];
+	u64 antdiv_lastbtsf[ATH_ANT_DIV_MAX_CFG];
+	u64 antdiv_laststatetsf;
+	u8 antdiv_bssid[ETH_ALEN];
+};
+
+void ath_slow_ant_div_init(struct ath_antdiv *antdiv,
+	struct ath_softc *sc, int32_t rssitrig);
+void ath_slow_ant_div_start(struct ath_antdiv *antdiv,
+			    u8 num_antcfg,
+			    const u8 *bssid);
+void ath_slow_ant_div_stop(struct ath_antdiv *antdiv);
+void ath_slow_ant_div(struct ath_antdiv *antdiv,
+		      struct ieee80211_hdr *wh,
+		      struct ath_rx_status *rx_stats);
+void ath_setdefantenna(void *sc, u32 antenna);
+
+/********************/
+/* Main driver core */
+/********************/
+
+/*
+ * Default cache line size, in bytes.
+ * Used when PCI device not fully initialized by bootrom/BIOS
+*/
+#define DEFAULT_CACHELINE       32
+#define	ATH_DEFAULT_NOISE_FLOOR -95
+#define ATH_REGCLASSIDS_MAX     10
+#define ATH_CABQ_READY_TIME     80  /* % of beacon interval */
+#define ATH_PREAMBLE_SHORT	(1<<0)
+#define ATH_PROTECT_ENABLE	(1<<1)
+#define ATH_MAX_SW_RETRIES      10
+/* Num farmes difference in tx to flip default recv */
+#define	ATH_ANTENNA_DIFF	2
+#define ATH_CHAN_MAX            255
+#define IEEE80211_WEP_NKID      4       /* number of key ids */
+#define IEEE80211_RATE_VAL      0x7f
+/*
+ * The key cache is used for h/w cipher state and also for
+ * tracking station state such as the current tx antenna.
+ * We also setup a mapping table between key cache slot indices
+ * and station state to short-circuit node lookups on rx.
+ * Different parts have different size key caches.  We handle
+ * up to ATH_KEYMAX entries (could dynamically allocate state).
+ */
+#define	ATH_KEYMAX	        128        /* max key cache size we handle */
+
+#define RESET_RETRY_TXQ         0x00000001
+#define ATH_IF_ID_ANY   	0xff
+
+#define ATH_TXPOWER_MAX         100     /* .5 dBm units */
+
+#define RSSI_LPF_THRESHOLD         -20
+#define ATH_RSSI_EP_MULTIPLIER     (1<<7)  /* pow2 to optimize out * and / */
+#define ATH_RATE_DUMMY_MARKER      0
+#define ATH_RSSI_LPF_LEN           10
+#define ATH_RSSI_DUMMY_MARKER      0x127
+
+#define ATH_EP_MUL(x, mul)         ((x) * (mul))
+#define ATH_EP_RND(x, mul)						\
+	((((x)%(mul)) >= ((mul)/2)) ? ((x) + ((mul) - 1)) / (mul) : (x)/(mul))
+#define ATH_RSSI_OUT(x)							\
+	(((x) != ATH_RSSI_DUMMY_MARKER) ?				\
+	 (ATH_EP_RND((x), ATH_RSSI_EP_MULTIPLIER)) : ATH_RSSI_DUMMY_MARKER)
+#define ATH_RSSI_IN(x)					\
+	(ATH_EP_MUL((x), ATH_RSSI_EP_MULTIPLIER))
+#define ATH_LPF_RSSI(x, y, len)						\
+	((x != ATH_RSSI_DUMMY_MARKER) ? \
+		(((x) * ((len) - 1) + (y)) / (len)) : (y))
+#define ATH_RSSI_LPF(x, y) do {						\
+		if ((y) >= RSSI_LPF_THRESHOLD)				\
+			x = ATH_LPF_RSSI((x), \
+				ATH_RSSI_IN((y)), ATH_RSSI_LPF_LEN); \
+	} while (0)
+
+
+enum PROT_MODE {
+	PROT_M_NONE = 0,
+	PROT_M_RTSCTS,
+	PROT_M_CTSONLY
+};
+
+enum RATE_TYPE {
+	NORMAL_RATE = 0,
+	HALF_RATE,
+	QUARTER_RATE
+};
+
+struct ath_ht_info {
+	enum ath9k_ht_macmode tx_chan_width;
+	u16 maxampdu;
+	u8 mpdudensity;
+	u8 ext_chan_offset;
+};
+
+struct ath_softc {
+	struct ieee80211_hw *hw;
+	struct pci_dev *pdev;
+	void __iomem *mem;
+	struct tasklet_struct intr_tq;
+	struct tasklet_struct bcon_tasklet;
+	struct ath_config sc_config;	/* load-time parameters */
+	int sc_debug;
+	struct ath_hal *sc_ah;
+	struct ath_rate_softc *sc_rc;	/* tx rate control support */
+	u32 sc_intrstatus;
+	enum ath9k_opmode sc_opmode;	/* current operating mode */
+
+	u8 sc_invalid;			/* being detached */
+	u8 sc_beacons;			/* beacons running */
+	u8 sc_scanning;			/* scanning active */
+	u8 sc_txaggr;			/* enable 11n tx aggregation */
+	u8 sc_rxaggr;			/* enable 11n rx aggregation */
+	u8 sc_update_chainmask;		/* change chain mask */
+	u8 sc_full_reset;		/* force full reset */
+	enum wireless_mode sc_curmode;	/* current phy mode */
+	u16 sc_curtxpow;
+	u16 sc_curaid;
+	u8 sc_curbssid[ETH_ALEN];
+	u8 sc_myaddr[ETH_ALEN];
+	enum PROT_MODE sc_protmode;
+	u8 sc_mcastantenna;
+	u8 sc_txantenna;		/* data tx antenna (fixed or auto) */
+	u8 sc_nbcnvaps;			/* # of vaps sending beacons */
+	u16 sc_nvaps;			/* # of active virtual ap's */
+	struct ath_vap *sc_vaps[ATH_BCBUF];
+	enum ath9k_int sc_imask;
+	u8 sc_bssidmask[ETH_ALEN];
+	u8 sc_defant;			/* current default antenna */
+	u8 sc_rxotherant;		/* rx's on non-default antenna */
+	u16 sc_cachelsz;
+	int sc_slotupdate;		/* slot to next advance fsm */
+	int sc_slottime;
+	u8 sc_noreset;
+	int sc_bslot[ATH_BCBUF];
+	struct ath9k_node_stats sc_halstats; /* station-mode rssi stats */
+	struct list_head node_list;
+	struct ath_ht_info sc_ht_info;
+	int16_t sc_noise_floor;		/* signal noise floor in dBm */
+	enum ath9k_ht_extprotspacing sc_ht_extprotspacing;
+	u8 sc_tx_chainmask;
+	u8 sc_rx_chainmask;
+	u8 sc_rxchaindetect_ref;
+	u8 sc_rxchaindetect_thresh5GHz;
+	u8 sc_rxchaindetect_thresh2GHz;
+	u8 sc_rxchaindetect_delta5GHz;
+	u8 sc_rxchaindetect_delta2GHz;
+	u32 sc_rtsaggrlimit;		/* Chipset specific aggr limit */
+	u32 sc_flags;
+#ifdef CONFIG_SLOW_ANT_DIV
+	struct ath_antdiv sc_antdiv;
+#endif
+	enum {
+		OK,		/* no change needed */
+		UPDATE,		/* update pending */
+		COMMIT		/* beacon sent, commit change */
+	} sc_updateslot;	/* slot time update fsm */
+
+	/* Crypto */
+	u32 sc_keymax;		/* size of key cache */
+	DECLARE_BITMAP(sc_keymap, ATH_KEYMAX);	/* key use bit map */
+	u8 sc_splitmic;		/* split TKIP MIC keys */
+	int sc_keytype;
+
+	/* RX */
+	struct list_head sc_rxbuf;
+	struct ath_descdma sc_rxdma;
+	int sc_rxbufsize;	/* rx size based on mtu */
+	u32 *sc_rxlink;		/* link ptr in last RX desc */
+	u32 sc_rxflush;		/* rx flush in progress */
+	u64 sc_lastrx;		/* tsf of last rx'd frame */
+
+	/* TX */
+	struct list_head sc_txbuf;
+	struct ath_txq sc_txq[ATH9K_NUM_TX_QUEUES];
+	struct ath_descdma sc_txdma;
+	u32 sc_txqsetup;
+	u32 sc_txintrperiod;	/* tx interrupt batching */
+	int sc_haltype2q[ATH9K_WME_AC_VO+1]; /* HAL WME	AC -> h/w qnum */
+	u32 sc_ant_tx[8];	/* recent tx frames/antenna */
+
+	/* Beacon */
+	struct ath9k_tx_queue_info sc_beacon_qi;
+	struct ath_descdma sc_bdma;
+	struct ath_txq *sc_cabq;
+	struct list_head sc_bbuf;
+	u32 sc_bhalq;
+	u32 sc_bmisscount;
+	u32 ast_be_xmit;	/* beacons transmitted */
+
+	/* Rate */
+	struct ieee80211_rate rates[IEEE80211_NUM_BANDS][ATH_RATE_MAX];
+	const struct ath9k_rate_table *sc_currates;
+	u8 sc_rixmap[256];	/* IEEE to h/w rate table ix */
+	u8 sc_protrix;		/* protection rate index */
+	struct {
+		u32 rateKbps;	/* transfer rate in kbs */
+		u8 ieeerate;	/* IEEE rate */
+	} sc_hwmap[256];	/* h/w rate ix mappings */
+
+	/* Channel, Band */
+	struct ieee80211_channel channels[IEEE80211_NUM_BANDS][ATH_CHAN_MAX];
+	struct ieee80211_supported_band sbands[IEEE80211_NUM_BANDS];
+	struct ath9k_channel sc_curchan;
+
+	/* Locks */
+	spinlock_t sc_rxflushlock;
+	spinlock_t sc_rxbuflock;
+	spinlock_t sc_txbuflock;
+	spinlock_t sc_resetlock;
+	spinlock_t node_lock;
+};
+
+int ath_init(u16 devid, struct ath_softc *sc);
+void ath_deinit(struct ath_softc *sc);
+int ath_open(struct ath_softc *sc, struct ath9k_channel *initial_chan);
+int ath_suspend(struct ath_softc *sc);
+irqreturn_t ath_isr(int irq, void *dev);
+int ath_reset(struct ath_softc *sc);
+void ath_scan_start(struct ath_softc *sc);
+void ath_scan_end(struct ath_softc *sc);
+int ath_set_channel(struct ath_softc *sc, struct ath9k_channel *hchan);
+void ath_setup_rate(struct ath_softc *sc,
+		    enum wireless_mode wMode,
+		    enum RATE_TYPE type,
+		    const struct ath9k_rate_table *rt);
+
+/*********************/
+/* Utility Functions */
+/*********************/
+
+void ath_key_reset(struct ath_softc *sc, u16 keyix, int freeslot);
+int ath_keyset(struct ath_softc *sc,
+	       u16 keyix,
+	       struct ath9k_keyval *hk,
+	       const u8 mac[ETH_ALEN]);
+int ath_get_hal_qnum(u16 queue, struct ath_softc *sc);
+int ath_get_mac80211_qnum(u32 queue, struct ath_softc *sc);
+void ath_setslottime(struct ath_softc *sc);
+void ath_update_txpow(struct ath_softc *sc);
+int ath_cabq_update(struct ath_softc *);
+void ath_get_currentCountry(struct ath_softc *sc,
+	struct ath9k_country_entry *ctry);
+u64 ath_extend_tsf(struct ath_softc *sc, u32 rstamp);
+void ath_internal_reset(struct ath_softc *sc);
+u32 ath_chan2flags(struct ieee80211_channel *chan, struct ath_softc *sc);
+dma_addr_t ath_skb_map_single(struct ath_softc *sc,
+			      struct sk_buff *skb,
+			      int direction,
+			      dma_addr_t *pa);
+void ath_skb_unmap_single(struct ath_softc *sc,
+			  struct sk_buff *skb,
+			  int direction,
+			  dma_addr_t *pa);
+void ath_mcast_merge(struct ath_softc *sc, u32 mfilt[2]);
+enum ath9k_ht_macmode ath_cwm_macmode(struct ath_softc *sc);
+
+#endif /* CORE_H */
diff --git a/drivers/net/wireless/ath9k/hw.c b/drivers/net/wireless/ath9k/hw.c
new file mode 100644
index 000000000000..6dbfed0b4149
--- /dev/null
+++ b/drivers/net/wireless/ath9k/hw.c
@@ -0,0 +1,8575 @@
+/*
+ * Copyright (c) 2008 Atheros Communications Inc.
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#include <linux/io.h>
+#include <asm/unaligned.h>
+
+#include "core.h"
+#include "hw.h"
+#include "reg.h"
+#include "phy.h"
+#include "initvals.h"
+
+static void ath9k_hw_iqcal_collect(struct ath_hal *ah);
+static void ath9k_hw_iqcalibrate(struct ath_hal *ah, u8 numChains);
+static void ath9k_hw_adc_gaincal_collect(struct ath_hal *ah);
+static void ath9k_hw_adc_gaincal_calibrate(struct ath_hal *ah,
+					   u8 numChains);
+static void ath9k_hw_adc_dccal_collect(struct ath_hal *ah);
+static void ath9k_hw_adc_dccal_calibrate(struct ath_hal *ah,
+					 u8 numChains);
+
+static const u8 CLOCK_RATE[] = { 40, 80, 22, 44, 88, 40 };
+static const int16_t NOISE_FLOOR[] = { -96, -93, -98, -96, -93, -96 };
+
+static const struct hal_percal_data iq_cal_multi_sample = {
+	IQ_MISMATCH_CAL,
+	MAX_CAL_SAMPLES,
+	PER_MIN_LOG_COUNT,
+	ath9k_hw_iqcal_collect,
+	ath9k_hw_iqcalibrate
+};
+static const struct hal_percal_data iq_cal_single_sample = {
+	IQ_MISMATCH_CAL,
+	MIN_CAL_SAMPLES,
+	PER_MAX_LOG_COUNT,
+	ath9k_hw_iqcal_collect,
+	ath9k_hw_iqcalibrate
+};
+static const struct hal_percal_data adc_gain_cal_multi_sample = {
+	ADC_GAIN_CAL,
+	MAX_CAL_SAMPLES,
+	PER_MIN_LOG_COUNT,
+	ath9k_hw_adc_gaincal_collect,
+	ath9k_hw_adc_gaincal_calibrate
+};
+static const struct hal_percal_data adc_gain_cal_single_sample = {
+	ADC_GAIN_CAL,
+	MIN_CAL_SAMPLES,
+	PER_MAX_LOG_COUNT,
+	ath9k_hw_adc_gaincal_collect,
+	ath9k_hw_adc_gaincal_calibrate
+};
+static const struct hal_percal_data adc_dc_cal_multi_sample = {
+	ADC_DC_CAL,
+	MAX_CAL_SAMPLES,
+	PER_MIN_LOG_COUNT,
+	ath9k_hw_adc_dccal_collect,
+	ath9k_hw_adc_dccal_calibrate
+};
+static const struct hal_percal_data adc_dc_cal_single_sample = {
+	ADC_DC_CAL,
+	MIN_CAL_SAMPLES,
+	PER_MAX_LOG_COUNT,
+	ath9k_hw_adc_dccal_collect,
+	ath9k_hw_adc_dccal_calibrate
+};
+static const struct hal_percal_data adc_init_dc_cal = {
+	ADC_DC_INIT_CAL,
+	MIN_CAL_SAMPLES,
+	INIT_LOG_COUNT,
+	ath9k_hw_adc_dccal_collect,
+	ath9k_hw_adc_dccal_calibrate
+};
+
+static const struct ath_hal ar5416hal = {
+	AR5416_MAGIC,
+	0,
+	0,
+	NULL,
+	NULL,
+	CTRY_DEFAULT,
+	0,
+	0,
+	0,
+	0,
+	0,
+	{0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+	 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+	 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+	 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+	 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+	 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+	 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+	 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+	},
+};
+
+static struct ath9k_rate_table ar5416_11a_table = {
+	8,
+	{0},
+	{
+		{true, PHY_OFDM, 6000, 0x0b, 0x00, (0x80 | 12), 0},
+		{true, PHY_OFDM, 9000, 0x0f, 0x00, 18, 0},
+		{true, PHY_OFDM, 12000, 0x0a, 0x00, (0x80 | 24), 2},
+		{true, PHY_OFDM, 18000, 0x0e, 0x00, 36, 2},
+		{true, PHY_OFDM, 24000, 0x09, 0x00, (0x80 | 48), 4},
+		{true, PHY_OFDM, 36000, 0x0d, 0x00, 72, 4},
+		{true, PHY_OFDM, 48000, 0x08, 0x00, 96, 4},
+		{true, PHY_OFDM, 54000, 0x0c, 0x00, 108, 4}
+	},
+};
+
+static struct ath9k_rate_table ar5416_11b_table = {
+	4,
+	{0},
+	{
+		{true, PHY_CCK, 1000, 0x1b, 0x00, (0x80 | 2), 0},
+		{true, PHY_CCK, 2000, 0x1a, 0x04, (0x80 | 4), 1},
+		{true, PHY_CCK, 5500, 0x19, 0x04, (0x80 | 11), 1},
+		{true, PHY_CCK, 11000, 0x18, 0x04, (0x80 | 22), 1}
+	},
+};
+
+static struct ath9k_rate_table ar5416_11g_table = {
+	12,
+	{0},
+	{
+		{true, PHY_CCK, 1000, 0x1b, 0x00, (0x80 | 2), 0},
+		{true, PHY_CCK, 2000, 0x1a, 0x04, (0x80 | 4), 1},
+		{true, PHY_CCK, 5500, 0x19, 0x04, (0x80 | 11), 2},
+		{true, PHY_CCK, 11000, 0x18, 0x04, (0x80 | 22), 3},
+
+		{false, PHY_OFDM, 6000, 0x0b, 0x00, 12, 4},
+		{false, PHY_OFDM, 9000, 0x0f, 0x00, 18, 4},
+		{true, PHY_OFDM, 12000, 0x0a, 0x00, 24, 6},
+		{true, PHY_OFDM, 18000, 0x0e, 0x00, 36, 6},
+		{true, PHY_OFDM, 24000, 0x09, 0x00, 48, 8},
+		{true, PHY_OFDM, 36000, 0x0d, 0x00, 72, 8},
+		{true, PHY_OFDM, 48000, 0x08, 0x00, 96, 8},
+		{true, PHY_OFDM, 54000, 0x0c, 0x00, 108, 8}
+	},
+};
+
+static struct ath9k_rate_table ar5416_11ng_table = {
+	28,
+	{0},
+	{
+		{true, PHY_CCK, 1000, 0x1b, 0x00, (0x80 | 2), 0},
+		{true, PHY_CCK, 2000, 0x1a, 0x04, (0x80 | 4), 1},
+		{true, PHY_CCK, 5500, 0x19, 0x04, (0x80 | 11), 2},
+		{true, PHY_CCK, 11000, 0x18, 0x04, (0x80 | 22), 3},
+
+		{false, PHY_OFDM, 6000, 0x0b, 0x00, 12, 4},
+		{false, PHY_OFDM, 9000, 0x0f, 0x00, 18, 4},
+		{true, PHY_OFDM, 12000, 0x0a, 0x00, 24, 6},
+		{true, PHY_OFDM, 18000, 0x0e, 0x00, 36, 6},
+		{true, PHY_OFDM, 24000, 0x09, 0x00, 48, 8},
+		{true, PHY_OFDM, 36000, 0x0d, 0x00, 72, 8},
+		{true, PHY_OFDM, 48000, 0x08, 0x00, 96, 8},
+		{true, PHY_OFDM, 54000, 0x0c, 0x00, 108, 8},
+		{true, PHY_HT, 6500, 0x80, 0x00, 0, 4},
+		{true, PHY_HT, 13000, 0x81, 0x00, 1, 6},
+		{true, PHY_HT, 19500, 0x82, 0x00, 2, 6},
+		{true, PHY_HT, 26000, 0x83, 0x00, 3, 8},
+		{true, PHY_HT, 39000, 0x84, 0x00, 4, 8},
+		{true, PHY_HT, 52000, 0x85, 0x00, 5, 8},
+		{true, PHY_HT, 58500, 0x86, 0x00, 6, 8},
+		{true, PHY_HT, 65000, 0x87, 0x00, 7, 8},
+		{true, PHY_HT, 13000, 0x88, 0x00, 8, 4},
+		{true, PHY_HT, 26000, 0x89, 0x00, 9, 6},
+		{true, PHY_HT, 39000, 0x8a, 0x00, 10, 6},
+		{true, PHY_HT, 52000, 0x8b, 0x00, 11, 8},
+		{true, PHY_HT, 78000, 0x8c, 0x00, 12, 8},
+		{true, PHY_HT, 104000, 0x8d, 0x00, 13, 8},
+		{true, PHY_HT, 117000, 0x8e, 0x00, 14, 8},
+		{true, PHY_HT, 130000, 0x8f, 0x00, 15, 8},
+	},
+};
+
+static struct ath9k_rate_table ar5416_11na_table = {
+	24,
+	{0},
+	{
+		{true, PHY_OFDM, 6000, 0x0b, 0x00, (0x80 | 12), 0},
+		{true, PHY_OFDM, 9000, 0x0f, 0x00, 18, 0},
+		{true, PHY_OFDM, 12000, 0x0a, 0x00, (0x80 | 24), 2},
+		{true, PHY_OFDM, 18000, 0x0e, 0x00, 36, 2},
+		{true, PHY_OFDM, 24000, 0x09, 0x00, (0x80 | 48), 4},
+		{true, PHY_OFDM, 36000, 0x0d, 0x00, 72, 4},
+		{true, PHY_OFDM, 48000, 0x08, 0x00, 96, 4},
+		{true, PHY_OFDM, 54000, 0x0c, 0x00, 108, 4},
+		{true, PHY_HT, 6500, 0x80, 0x00, 0, 0},
+		{true, PHY_HT, 13000, 0x81, 0x00, 1, 2},
+		{true, PHY_HT, 19500, 0x82, 0x00, 2, 2},
+		{true, PHY_HT, 26000, 0x83, 0x00, 3, 4},
+		{true, PHY_HT, 39000, 0x84, 0x00, 4, 4},
+		{true, PHY_HT, 52000, 0x85, 0x00, 5, 4},
+		{true, PHY_HT, 58500, 0x86, 0x00, 6, 4},
+		{true, PHY_HT, 65000, 0x87, 0x00, 7, 4},
+		{true, PHY_HT, 13000, 0x88, 0x00, 8, 0},
+		{true, PHY_HT, 26000, 0x89, 0x00, 9, 2},
+		{true, PHY_HT, 39000, 0x8a, 0x00, 10, 2},
+		{true, PHY_HT, 52000, 0x8b, 0x00, 11, 4},
+		{true, PHY_HT, 78000, 0x8c, 0x00, 12, 4},
+		{true, PHY_HT, 104000, 0x8d, 0x00, 13, 4},
+		{true, PHY_HT, 117000, 0x8e, 0x00, 14, 4},
+		{true, PHY_HT, 130000, 0x8f, 0x00, 15, 4},
+	},
+};
+
+static enum wireless_mode ath9k_hw_chan2wmode(struct ath_hal *ah,
+				       const struct ath9k_channel *chan)
+{
+	if (IS_CHAN_CCK(chan))
+		return ATH9K_MODE_11A;
+	if (IS_CHAN_G(chan))
+		return ATH9K_MODE_11G;
+	return ATH9K_MODE_11A;
+}
+
+static bool ath9k_hw_wait(struct ath_hal *ah,
+			  u32 reg,
+			  u32 mask,
+			  u32 val)
+{
+	int i;
+
+	for (i = 0; i < (AH_TIMEOUT / AH_TIME_QUANTUM); i++) {
+		if ((REG_READ(ah, reg) & mask) == val)
+			return true;
+
+		udelay(AH_TIME_QUANTUM);
+	}
+	DPRINTF(ah->ah_sc, ATH_DBG_PHY_IO,
+		 "%s: timeout on reg 0x%x: 0x%08x & 0x%08x != 0x%08x\n",
+		 __func__, reg, REG_READ(ah, reg), mask, val);
+	return false;
+}
+
+static bool ath9k_hw_eeprom_read(struct ath_hal *ah, u32 off,
+				 u16 *data)
+{
+	(void) REG_READ(ah, AR5416_EEPROM_OFFSET + (off << AR5416_EEPROM_S));
+
+	if (!ath9k_hw_wait(ah,
+			   AR_EEPROM_STATUS_DATA,
+			   AR_EEPROM_STATUS_DATA_BUSY |
+			   AR_EEPROM_STATUS_DATA_PROT_ACCESS, 0)) {
+		return false;
+	}
+
+	*data = MS(REG_READ(ah, AR_EEPROM_STATUS_DATA),
+		   AR_EEPROM_STATUS_DATA_VAL);
+
+	return true;
+}
+
+static int ath9k_hw_flash_map(struct ath_hal *ah)
+{
+	struct ath_hal_5416 *ahp = AH5416(ah);
+
+	ahp->ah_cal_mem = ioremap(AR5416_EEPROM_START_ADDR, AR5416_EEPROM_MAX);
+
+	if (!ahp->ah_cal_mem) {
+		DPRINTF(ah->ah_sc, ATH_DBG_EEPROM,
+			 "%s: cannot remap eeprom region \n", __func__);
+		return -EIO;
+	}
+
+	return 0;
+}
+
+static bool ath9k_hw_flash_read(struct ath_hal *ah, u32 off,
+				u16 *data)
+{
+	struct ath_hal_5416 *ahp = AH5416(ah);
+
+	*data = ioread16(ahp->ah_cal_mem + off);
+	return true;
+}
+
+static void ath9k_hw_read_revisions(struct ath_hal *ah)
+{
+	u32 val;
+
+	val = REG_READ(ah, AR_SREV) & AR_SREV_ID;
+
+	if (val == 0xFF) {
+		val = REG_READ(ah, AR_SREV);
+
+		ah->ah_macVersion =
+			(val & AR_SREV_VERSION2) >> AR_SREV_TYPE2_S;
+
+		ah->ah_macRev = MS(val, AR_SREV_REVISION2);
+		ah->ah_isPciExpress =
+			(val & AR_SREV_TYPE2_HOST_MODE) ? 0 : 1;
+
+	} else {
+		if (!AR_SREV_9100(ah))
+			ah->ah_macVersion = MS(val, AR_SREV_VERSION);
+
+		ah->ah_macRev = val & AR_SREV_REVISION;
+
+		if (ah->ah_macVersion == AR_SREV_VERSION_5416_PCIE)
+			ah->ah_isPciExpress = true;
+	}
+}
+
+u32 ath9k_hw_reverse_bits(u32 val, u32 n)
+{
+	u32 retval;
+	int i;
+
+	for (i = 0, retval = 0; i < n; i++) {
+		retval = (retval << 1) | (val & 1);
+		val >>= 1;
+	}
+	return retval;
+}
+
+static void ath9k_hw_set_defaults(struct ath_hal *ah)
+{
+	int i;
+
+	ah->ah_config.dma_beacon_response_time = 2;
+	ah->ah_config.sw_beacon_response_time = 10;
+	ah->ah_config.additional_swba_backoff = 0;
+	ah->ah_config.ack_6mb = 0x0;
+	ah->ah_config.cwm_ignore_extcca = 0;
+	ah->ah_config.pcie_powersave_enable = 0;
+	ah->ah_config.pcie_l1skp_enable = 0;
+	ah->ah_config.pcie_clock_req = 0;
+	ah->ah_config.pcie_power_reset = 0x100;
+	ah->ah_config.pcie_restore = 0;
+	ah->ah_config.pcie_waen = 0;
+	ah->ah_config.analog_shiftreg = 1;
+	ah->ah_config.ht_enable = 1;
+	ah->ah_config.ofdm_trig_low = 200;
+	ah->ah_config.ofdm_trig_high = 500;
+	ah->ah_config.cck_trig_high = 200;
+	ah->ah_config.cck_trig_low = 100;
+	ah->ah_config.enable_ani = 0;
+	ah->ah_config.noise_immunity_level = 4;
+	ah->ah_config.ofdm_weaksignal_det = 1;
+	ah->ah_config.cck_weaksignal_thr = 0;
+	ah->ah_config.spur_immunity_level = 2;
+	ah->ah_config.firstep_level = 0;
+	ah->ah_config.rssi_thr_high = 40;
+	ah->ah_config.rssi_thr_low = 7;
+	ah->ah_config.diversity_control = 0;
+	ah->ah_config.antenna_switch_swap = 0;
+
+	for (i = 0; i < AR_EEPROM_MODAL_SPURS; i++) {
+		ah->ah_config.spurchans[i][0] = AR_NO_SPUR;
+		ah->ah_config.spurchans[i][1] = AR_NO_SPUR;
+	}
+
+	ah->ah_config.intr_mitigation = 0;
+}
+
+static inline void ath9k_hw_override_ini(struct ath_hal *ah,
+					 struct ath9k_channel *chan)
+{
+	if (!AR_SREV_5416_V20_OR_LATER(ah)
+	    || AR_SREV_9280_10_OR_LATER(ah))
+		return;
+
+	REG_WRITE(ah, 0x9800 + (651 << 2), 0x11);
+}
+
+static inline void ath9k_hw_init_bb(struct ath_hal *ah,
+				    struct ath9k_channel *chan)
+{
+	u32 synthDelay;
+
+	synthDelay = REG_READ(ah, AR_PHY_RX_DELAY) & AR_PHY_RX_DELAY_DELAY;
+	if (IS_CHAN_CCK(chan))
+		synthDelay = (4 * synthDelay) / 22;
+	else
+		synthDelay /= 10;
+
+	REG_WRITE(ah, AR_PHY_ACTIVE, AR_PHY_ACTIVE_EN);
+
+	udelay(synthDelay + BASE_ACTIVATE_DELAY);
+}
+
+static inline void ath9k_hw_init_interrupt_masks(struct ath_hal *ah,
+						 enum ath9k_opmode opmode)
+{
+	struct ath_hal_5416 *ahp = AH5416(ah);
+
+	ahp->ah_maskReg = AR_IMR_TXERR |
+		AR_IMR_TXURN |
+		AR_IMR_RXERR |
+		AR_IMR_RXORN |
+		AR_IMR_BCNMISC;
+
+	if (ahp->ah_intrMitigation)
+		ahp->ah_maskReg |= AR_IMR_RXINTM | AR_IMR_RXMINTR;
+	else
+		ahp->ah_maskReg |= AR_IMR_RXOK;
+
+	ahp->ah_maskReg |= AR_IMR_TXOK;
+
+	if (opmode == ATH9K_M_HOSTAP)
+		ahp->ah_maskReg |= AR_IMR_MIB;
+
+	REG_WRITE(ah, AR_IMR, ahp->ah_maskReg);
+	REG_WRITE(ah, AR_IMR_S2, REG_READ(ah, AR_IMR_S2) | AR_IMR_S2_GTT);
+
+	if (!AR_SREV_9100(ah)) {
+		REG_WRITE(ah, AR_INTR_SYNC_CAUSE, 0xFFFFFFFF);
+		REG_WRITE(ah, AR_INTR_SYNC_ENABLE, AR_INTR_SYNC_DEFAULT);
+		REG_WRITE(ah, AR_INTR_SYNC_MASK, 0);
+	}
+}
+
+static inline void ath9k_hw_init_qos(struct ath_hal *ah)
+{
+	REG_WRITE(ah, AR_MIC_QOS_CONTROL, 0x100aa);
+	REG_WRITE(ah, AR_MIC_QOS_SELECT, 0x3210);
+
+	REG_WRITE(ah, AR_QOS_NO_ACK,
+		  SM(2, AR_QOS_NO_ACK_TWO_BIT) |
+		  SM(5, AR_QOS_NO_ACK_BIT_OFF) |
+		  SM(0, AR_QOS_NO_ACK_BYTE_OFF));
+
+	REG_WRITE(ah, AR_TXOP_X, AR_TXOP_X_VAL);
+	REG_WRITE(ah, AR_TXOP_0_3, 0xFFFFFFFF);
+	REG_WRITE(ah, AR_TXOP_4_7, 0xFFFFFFFF);
+	REG_WRITE(ah, AR_TXOP_8_11, 0xFFFFFFFF);
+	REG_WRITE(ah, AR_TXOP_12_15, 0xFFFFFFFF);
+}
+
+static void ath9k_hw_analog_shift_rmw(struct ath_hal *ah,
+				      u32 reg,
+				      u32 mask,
+				      u32 shift,
+				      u32 val)
+{
+	u32 regVal;
+
+	regVal = REG_READ(ah, reg) & ~mask;
+	regVal |= (val << shift) & mask;
+
+	REG_WRITE(ah, reg, regVal);
+
+	if (ah->ah_config.analog_shiftreg)
+		udelay(100);
+
+	return;
+}
+
+static u8 ath9k_hw_get_num_ant_config(struct ath_hal_5416 *ahp,
+				      enum ieee80211_band freq_band)
+{
+	struct ar5416_eeprom *eep = &ahp->ah_eeprom;
+	struct modal_eep_header *pModal =
+		&(eep->modalHeader[IEEE80211_BAND_5GHZ == freq_band]);
+	struct base_eep_header *pBase = &eep->baseEepHeader;
+	u8 num_ant_config;
+
+	num_ant_config = 1;
+
+	if (pBase->version >= 0x0E0D)
+		if (pModal->useAnt1)
+			num_ant_config += 1;
+
+	return num_ant_config;
+}
+
+static int
+ath9k_hw_get_eeprom_antenna_cfg(struct ath_hal_5416 *ahp,
+				struct ath9k_channel *chan,
+				u8 index,
+				u16 *config)
+{
+	struct ar5416_eeprom *eep = &ahp->ah_eeprom;
+	struct modal_eep_header *pModal =
+		&(eep->modalHeader[IS_CHAN_2GHZ(chan)]);
+	struct base_eep_header *pBase = &eep->baseEepHeader;
+
+	switch (index) {
+	case 0:
+		*config = pModal->antCtrlCommon & 0xFFFF;
+		return 0;
+	case 1:
+		if (pBase->version >= 0x0E0D) {
+			if (pModal->useAnt1) {
+				*config =
+				((pModal->antCtrlCommon & 0xFFFF0000) >> 16);
+				return 0;
+			}
+		}
+		break;
+	default:
+		break;
+	}
+
+	return -EINVAL;
+}
+
+static inline bool ath9k_hw_nvram_read(struct ath_hal *ah,
+				       u32 off,
+				       u16 *data)
+{
+	if (ath9k_hw_use_flash(ah))
+		return ath9k_hw_flash_read(ah, off, data);
+	else
+		return ath9k_hw_eeprom_read(ah, off, data);
+}
+
+static inline bool ath9k_hw_fill_eeprom(struct ath_hal *ah)
+{
+	struct ath_hal_5416 *ahp = AH5416(ah);
+	struct ar5416_eeprom *eep = &ahp->ah_eeprom;
+	u16 *eep_data;
+	int addr, ar5416_eep_start_loc = 0;
+
+	if (!ath9k_hw_use_flash(ah)) {
+		DPRINTF(ah->ah_sc, ATH_DBG_EEPROM,
+			 "%s: Reading from EEPROM, not flash\n", __func__);
+		ar5416_eep_start_loc = 256;
+	}
+	if (AR_SREV_9100(ah))
+		ar5416_eep_start_loc = 256;
+
+	eep_data = (u16 *) eep;
+	for (addr = 0;
+	     addr < sizeof(struct ar5416_eeprom) / sizeof(u16);
+	     addr++) {
+		if (!ath9k_hw_nvram_read(ah, addr + ar5416_eep_start_loc,
+					 eep_data)) {
+			DPRINTF(ah->ah_sc, ATH_DBG_EEPROM,
+				 "%s: Unable to read eeprom region \n",
+				 __func__);
+			return false;
+		}
+		eep_data++;
+	}
+	return true;
+}
+
+/* XXX: Clean me up, make me more legible */
+static bool
+ath9k_hw_eeprom_set_board_values(struct ath_hal *ah,
+				 struct ath9k_channel *chan)
+{
+	struct modal_eep_header *pModal;
+	int i, regChainOffset;
+	struct ath_hal_5416 *ahp = AH5416(ah);
+	struct ar5416_eeprom *eep = &ahp->ah_eeprom;
+	u8 txRxAttenLocal;
+	u16 ant_config;
+
+	pModal = &(eep->modalHeader[IS_CHAN_2GHZ(chan)]);
+
+	txRxAttenLocal = IS_CHAN_2GHZ(chan) ? 23 : 44;
+
+	ath9k_hw_get_eeprom_antenna_cfg(ahp, chan, 1, &ant_config);
+	REG_WRITE(ah, AR_PHY_SWITCH_COM, ant_config);
+
+	for (i = 0; i < AR5416_MAX_CHAINS; i++) {
+		if (AR_SREV_9280(ah)) {
+			if (i >= 2)
+				break;
+		}
+
+		if (AR_SREV_5416_V20_OR_LATER(ah) &&
+		    (ahp->ah_rxchainmask == 5 || ahp->ah_txchainmask == 5)
+		    && (i != 0))
+			regChainOffset = (i == 1) ? 0x2000 : 0x1000;
+		else
+			regChainOffset = i * 0x1000;
+
+		REG_WRITE(ah, AR_PHY_SWITCH_CHAIN_0 + regChainOffset,
+			  pModal->antCtrlChain[i]);
+
+		REG_WRITE(ah, AR_PHY_TIMING_CTRL4(0) + regChainOffset,
+			  (REG_READ(ah,
+				    AR_PHY_TIMING_CTRL4(0) +
+				    regChainOffset) &
+			   ~(AR_PHY_TIMING_CTRL4_IQCORR_Q_Q_COFF |
+			     AR_PHY_TIMING_CTRL4_IQCORR_Q_I_COFF)) |
+			  SM(pModal->iqCalICh[i],
+			     AR_PHY_TIMING_CTRL4_IQCORR_Q_I_COFF) |
+			  SM(pModal->iqCalQCh[i],
+			     AR_PHY_TIMING_CTRL4_IQCORR_Q_Q_COFF));
+
+		if ((i == 0) || AR_SREV_5416_V20_OR_LATER(ah)) {
+			if ((eep->baseEepHeader.version &
+			     AR5416_EEP_VER_MINOR_MASK) >=
+			    AR5416_EEP_MINOR_VER_3) {
+				txRxAttenLocal = pModal->txRxAttenCh[i];
+				if (AR_SREV_9280_10_OR_LATER(ah)) {
+					REG_RMW_FIELD(ah,
+						AR_PHY_GAIN_2GHZ +
+						regChainOffset,
+						AR_PHY_GAIN_2GHZ_XATTEN1_MARGIN,
+						pModal->
+						bswMargin[i]);
+					REG_RMW_FIELD(ah,
+						AR_PHY_GAIN_2GHZ +
+						regChainOffset,
+						AR_PHY_GAIN_2GHZ_XATTEN1_DB,
+						pModal->
+						bswAtten[i]);
+					REG_RMW_FIELD(ah,
+						AR_PHY_GAIN_2GHZ +
+						regChainOffset,
+						AR_PHY_GAIN_2GHZ_XATTEN2_MARGIN,
+						pModal->
+						xatten2Margin[i]);
+					REG_RMW_FIELD(ah,
+						AR_PHY_GAIN_2GHZ +
+						regChainOffset,
+						AR_PHY_GAIN_2GHZ_XATTEN2_DB,
+						pModal->
+						xatten2Db[i]);
+				} else {
+					REG_WRITE(ah,
+						  AR_PHY_GAIN_2GHZ +
+						  regChainOffset,
+						  (REG_READ(ah,
+							    AR_PHY_GAIN_2GHZ +
+							    regChainOffset) &
+						   ~AR_PHY_GAIN_2GHZ_BSW_MARGIN)
+						  | SM(pModal->
+						  bswMargin[i],
+						  AR_PHY_GAIN_2GHZ_BSW_MARGIN));
+					REG_WRITE(ah,
+						  AR_PHY_GAIN_2GHZ +
+						  regChainOffset,
+						  (REG_READ(ah,
+							    AR_PHY_GAIN_2GHZ +
+							    regChainOffset) &
+						   ~AR_PHY_GAIN_2GHZ_BSW_ATTEN)
+						  | SM(pModal->bswAtten[i],
+						  AR_PHY_GAIN_2GHZ_BSW_ATTEN));
+				}
+			}
+			if (AR_SREV_9280_10_OR_LATER(ah)) {
+				REG_RMW_FIELD(ah,
+					      AR_PHY_RXGAIN +
+					      regChainOffset,
+					      AR9280_PHY_RXGAIN_TXRX_ATTEN,
+					      txRxAttenLocal);
+				REG_RMW_FIELD(ah,
+					      AR_PHY_RXGAIN +
+					      regChainOffset,
+					      AR9280_PHY_RXGAIN_TXRX_MARGIN,
+					      pModal->rxTxMarginCh[i]);
+			} else {
+				REG_WRITE(ah,
+					  AR_PHY_RXGAIN + regChainOffset,
+					  (REG_READ(ah,
+						    AR_PHY_RXGAIN +
+						    regChainOffset) &
+					   ~AR_PHY_RXGAIN_TXRX_ATTEN) |
+					  SM(txRxAttenLocal,
+					     AR_PHY_RXGAIN_TXRX_ATTEN));
+				REG_WRITE(ah,
+					  AR_PHY_GAIN_2GHZ +
+					  regChainOffset,
+					  (REG_READ(ah,
+						    AR_PHY_GAIN_2GHZ +
+						    regChainOffset) &
+					   ~AR_PHY_GAIN_2GHZ_RXTX_MARGIN) |
+					  SM(pModal->rxTxMarginCh[i],
+					     AR_PHY_GAIN_2GHZ_RXTX_MARGIN));
+			}
+		}
+	}
+
+	if (AR_SREV_9280_10_OR_LATER(ah)) {
+		if (IS_CHAN_2GHZ(chan)) {
+			ath9k_hw_analog_shift_rmw(ah, AR_AN_RF2G1_CH0,
+						  AR_AN_RF2G1_CH0_OB,
+						  AR_AN_RF2G1_CH0_OB_S,
+						  pModal->ob);
+			ath9k_hw_analog_shift_rmw(ah, AR_AN_RF2G1_CH0,
+						  AR_AN_RF2G1_CH0_DB,
+						  AR_AN_RF2G1_CH0_DB_S,
+						  pModal->db);
+			ath9k_hw_analog_shift_rmw(ah, AR_AN_RF2G1_CH1,
+						  AR_AN_RF2G1_CH1_OB,
+						  AR_AN_RF2G1_CH1_OB_S,
+						  pModal->ob_ch1);
+			ath9k_hw_analog_shift_rmw(ah, AR_AN_RF2G1_CH1,
+						  AR_AN_RF2G1_CH1_DB,
+						  AR_AN_RF2G1_CH1_DB_S,
+						  pModal->db_ch1);
+		} else {
+			ath9k_hw_analog_shift_rmw(ah, AR_AN_RF5G1_CH0,
+						  AR_AN_RF5G1_CH0_OB5,
+						  AR_AN_RF5G1_CH0_OB5_S,
+						  pModal->ob);
+			ath9k_hw_analog_shift_rmw(ah, AR_AN_RF5G1_CH0,
+						  AR_AN_RF5G1_CH0_DB5,
+						  AR_AN_RF5G1_CH0_DB5_S,
+						  pModal->db);
+			ath9k_hw_analog_shift_rmw(ah, AR_AN_RF5G1_CH1,
+						  AR_AN_RF5G1_CH1_OB5,
+						  AR_AN_RF5G1_CH1_OB5_S,
+						  pModal->ob_ch1);
+			ath9k_hw_analog_shift_rmw(ah, AR_AN_RF5G1_CH1,
+						  AR_AN_RF5G1_CH1_DB5,
+						  AR_AN_RF5G1_CH1_DB5_S,
+						  pModal->db_ch1);
+		}
+		ath9k_hw_analog_shift_rmw(ah, AR_AN_TOP2,
+					  AR_AN_TOP2_XPABIAS_LVL,
+					  AR_AN_TOP2_XPABIAS_LVL_S,
+					  pModal->xpaBiasLvl);
+		ath9k_hw_analog_shift_rmw(ah, AR_AN_TOP2,
+					  AR_AN_TOP2_LOCALBIAS,
+					  AR_AN_TOP2_LOCALBIAS_S,
+					  pModal->local_bias);
+		DPRINTF(ah->ah_sc, ATH_DBG_ANY, "ForceXPAon: %d\n",
+			pModal->force_xpaon);
+		REG_RMW_FIELD(ah, AR_PHY_XPA_CFG, AR_PHY_FORCE_XPA_CFG,
+			      pModal->force_xpaon);
+	}
+
+	REG_RMW_FIELD(ah, AR_PHY_SETTLING, AR_PHY_SETTLING_SWITCH,
+		      pModal->switchSettling);
+	REG_RMW_FIELD(ah, AR_PHY_DESIRED_SZ, AR_PHY_DESIRED_SZ_ADC,
+		      pModal->adcDesiredSize);
+
+	if (!AR_SREV_9280_10_OR_LATER(ah))
+		REG_RMW_FIELD(ah, AR_PHY_DESIRED_SZ,
+			      AR_PHY_DESIRED_SZ_PGA,
+			      pModal->pgaDesiredSize);
+
+	REG_WRITE(ah, AR_PHY_RF_CTL4,
+		  SM(pModal->txEndToXpaOff, AR_PHY_RF_CTL4_TX_END_XPAA_OFF)
+		  | SM(pModal->txEndToXpaOff,
+		       AR_PHY_RF_CTL4_TX_END_XPAB_OFF)
+		  | SM(pModal->txFrameToXpaOn,
+		       AR_PHY_RF_CTL4_FRAME_XPAA_ON)
+		  | SM(pModal->txFrameToXpaOn,
+		       AR_PHY_RF_CTL4_FRAME_XPAB_ON));
+
+	REG_RMW_FIELD(ah, AR_PHY_RF_CTL3, AR_PHY_TX_END_TO_A2_RX_ON,
+		      pModal->txEndToRxOn);
+	if (AR_SREV_9280_10_OR_LATER(ah)) {
+		REG_RMW_FIELD(ah, AR_PHY_CCA, AR9280_PHY_CCA_THRESH62,
+			      pModal->thresh62);
+		REG_RMW_FIELD(ah, AR_PHY_EXT_CCA0,
+			      AR_PHY_EXT_CCA0_THRESH62,
+			      pModal->thresh62);
+	} else {
+		REG_RMW_FIELD(ah, AR_PHY_CCA, AR_PHY_CCA_THRESH62,
+			      pModal->thresh62);
+		REG_RMW_FIELD(ah, AR_PHY_EXT_CCA,
+			      AR_PHY_EXT_CCA_THRESH62,
+			      pModal->thresh62);
+	}
+
+	if ((eep->baseEepHeader.version & AR5416_EEP_VER_MINOR_MASK) >=
+	    AR5416_EEP_MINOR_VER_2) {
+		REG_RMW_FIELD(ah, AR_PHY_RF_CTL2,
+			      AR_PHY_TX_END_DATA_START,
+			      pModal->txFrameToDataStart);
+		REG_RMW_FIELD(ah, AR_PHY_RF_CTL2, AR_PHY_TX_END_PA_ON,
+			      pModal->txFrameToPaOn);
+	}
+
+	if ((eep->baseEepHeader.version & AR5416_EEP_VER_MINOR_MASK) >=
+	    AR5416_EEP_MINOR_VER_3) {
+		if (IS_CHAN_HT40(chan))
+			REG_RMW_FIELD(ah, AR_PHY_SETTLING,
+				      AR_PHY_SETTLING_SWITCH,
+				      pModal->swSettleHt40);
+	}
+
+	return true;
+}
+
+static inline int ath9k_hw_check_eeprom(struct ath_hal *ah)
+{
+	u32 sum = 0, el;
+	u16 *eepdata;
+	int i;
+	struct ath_hal_5416 *ahp = AH5416(ah);
+	bool need_swap = false;
+	struct ar5416_eeprom *eep =
+		(struct ar5416_eeprom *) &ahp->ah_eeprom;
+
+	if (!ath9k_hw_use_flash(ah)) {
+		u16 magic, magic2;
+		int addr;
+
+		if (!ath9k_hw_nvram_read(ah, AR5416_EEPROM_MAGIC_OFFSET,
+					&magic)) {
+			DPRINTF(ah->ah_sc, ATH_DBG_EEPROM,
+				 "%s: Reading Magic # failed\n", __func__);
+			return false;
+		}
+		DPRINTF(ah->ah_sc, ATH_DBG_EEPROM, "%s: Read Magic = 0x%04X\n",
+			 __func__, magic);
+
+		if (magic != AR5416_EEPROM_MAGIC) {
+			magic2 = swab16(magic);
+
+			if (magic2 == AR5416_EEPROM_MAGIC) {
+				need_swap = true;
+				eepdata = (u16 *) (&ahp->ah_eeprom);
+
+				for (addr = 0;
+				     addr <
+					     sizeof(struct ar5416_eeprom) /
+					     sizeof(u16); addr++) {
+					u16 temp;
+
+					temp = swab16(*eepdata);
+					*eepdata = temp;
+					eepdata++;
+
+					DPRINTF(ah->ah_sc, ATH_DBG_EEPROM,
+						 "0x%04X  ", *eepdata);
+					if (((addr + 1) % 6) == 0)
+						DPRINTF(ah->ah_sc,
+							 ATH_DBG_EEPROM,
+							 "\n");
+				}
+			} else {
+				DPRINTF(ah->ah_sc, ATH_DBG_EEPROM,
+					 "Invalid EEPROM Magic. "
+					"endianness missmatch.\n");
+				return -EINVAL;
+			}
+		}
+	}
+	DPRINTF(ah->ah_sc, ATH_DBG_EEPROM, "need_swap = %s.\n",
+		 need_swap ? "True" : "False");
+
+	if (need_swap)
+		el = swab16(ahp->ah_eeprom.baseEepHeader.length);
+	else
+		el = ahp->ah_eeprom.baseEepHeader.length;
+
+	if (el > sizeof(struct ar5416_eeprom))
+		el = sizeof(struct ar5416_eeprom) / sizeof(u16);
+	else
+		el = el / sizeof(u16);
+
+	eepdata = (u16 *) (&ahp->ah_eeprom);
+
+	for (i = 0; i < el; i++)
+		sum ^= *eepdata++;
+
+	if (need_swap) {
+		u32 integer, j;
+		u16 word;
+
+		DPRINTF(ah->ah_sc, ATH_DBG_EEPROM,
+			 "EEPROM Endianness is not native.. Changing \n");
+
+		word = swab16(eep->baseEepHeader.length);
+		eep->baseEepHeader.length = word;
+
+		word = swab16(eep->baseEepHeader.checksum);
+		eep->baseEepHeader.checksum = word;
+
+		word = swab16(eep->baseEepHeader.version);
+		eep->baseEepHeader.version = word;
+
+		word = swab16(eep->baseEepHeader.regDmn[0]);
+		eep->baseEepHeader.regDmn[0] = word;
+
+		word = swab16(eep->baseEepHeader.regDmn[1]);
+		eep->baseEepHeader.regDmn[1] = word;
+
+		word = swab16(eep->baseEepHeader.rfSilent);
+		eep->baseEepHeader.rfSilent = word;
+
+		word = swab16(eep->baseEepHeader.blueToothOptions);
+		eep->baseEepHeader.blueToothOptions = word;
+
+		word = swab16(eep->baseEepHeader.deviceCap);
+		eep->baseEepHeader.deviceCap = word;
+
+		for (j = 0; j < ARRAY_SIZE(eep->modalHeader); j++) {
+			struct modal_eep_header *pModal =
+				&eep->modalHeader[j];
+			integer = swab32(pModal->antCtrlCommon);
+			pModal->antCtrlCommon = integer;
+
+			for (i = 0; i < AR5416_MAX_CHAINS; i++) {
+				integer = swab32(pModal->antCtrlChain[i]);
+				pModal->antCtrlChain[i] = integer;
+			}
+
+			for (i = 0; i < AR5416_EEPROM_MODAL_SPURS; i++) {
+				word = swab16(pModal->spurChans[i].spurChan);
+				pModal->spurChans[i].spurChan = word;
+			}
+		}
+	}
+
+	if (sum != 0xffff || ar5416_get_eep_ver(ahp) != AR5416_EEP_VER ||
+	    ar5416_get_eep_rev(ahp) < AR5416_EEP_NO_BACK_VER) {
+		DPRINTF(ah->ah_sc, ATH_DBG_EEPROM,
+			 "Bad EEPROM checksum 0x%x or revision 0x%04x\n",
+			 sum, ar5416_get_eep_ver(ahp));
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static bool ath9k_hw_chip_test(struct ath_hal *ah)
+{
+	u32 regAddr[2] = { AR_STA_ID0, AR_PHY_BASE + (8 << 2) };
+	u32 regHold[2];
+	u32 patternData[4] = { 0x55555555,
+				     0xaaaaaaaa,
+				     0x66666666,
+				     0x99999999 };
+	int i, j;
+
+	for (i = 0; i < 2; i++) {
+		u32 addr = regAddr[i];
+		u32 wrData, rdData;
+
+		regHold[i] = REG_READ(ah, addr);
+		for (j = 0; j < 0x100; j++) {
+			wrData = (j << 16) | j;
+			REG_WRITE(ah, addr, wrData);
+			rdData = REG_READ(ah, addr);
+			if (rdData != wrData) {
+				DPRINTF(ah->ah_sc, ATH_DBG_REG_IO,
+				 "%s: address test failed "
+				"addr: 0x%08x - wr:0x%08x != rd:0x%08x\n",
+				 __func__, addr, wrData, rdData);
+				return false;
+			}
+		}
+		for (j = 0; j < 4; j++) {
+			wrData = patternData[j];
+			REG_WRITE(ah, addr, wrData);
+			rdData = REG_READ(ah, addr);
+			if (wrData != rdData) {
+				DPRINTF(ah->ah_sc, ATH_DBG_REG_IO,
+				 "%s: address test failed "
+				"addr: 0x%08x - wr:0x%08x != rd:0x%08x\n",
+				 __func__, addr, wrData, rdData);
+				return false;
+			}
+		}
+		REG_WRITE(ah, regAddr[i], regHold[i]);
+	}
+	udelay(100);
+	return true;
+}
+
+u32 ath9k_hw_getrxfilter(struct ath_hal *ah)
+{
+	u32 bits = REG_READ(ah, AR_RX_FILTER);
+	u32 phybits = REG_READ(ah, AR_PHY_ERR);
+
+	if (phybits & AR_PHY_ERR_RADAR)
+		bits |= ATH9K_RX_FILTER_PHYRADAR;
+	if (phybits & (AR_PHY_ERR_OFDM_TIMING | AR_PHY_ERR_CCK_TIMING))
+		bits |= ATH9K_RX_FILTER_PHYERR;
+	return bits;
+}
+
+void ath9k_hw_setrxfilter(struct ath_hal *ah, u32 bits)
+{
+	u32 phybits;
+
+	REG_WRITE(ah, AR_RX_FILTER, (bits & 0xffff) | AR_RX_COMPR_BAR);
+	phybits = 0;
+	if (bits & ATH9K_RX_FILTER_PHYRADAR)
+		phybits |= AR_PHY_ERR_RADAR;
+	if (bits & ATH9K_RX_FILTER_PHYERR)
+		phybits |= AR_PHY_ERR_OFDM_TIMING | AR_PHY_ERR_CCK_TIMING;
+	REG_WRITE(ah, AR_PHY_ERR, phybits);
+
+	if (phybits)
+		REG_WRITE(ah, AR_RXCFG,
+			  REG_READ(ah, AR_RXCFG) | AR_RXCFG_ZLFDMA);
+	else
+		REG_WRITE(ah, AR_RXCFG,
+			  REG_READ(ah, AR_RXCFG) & ~AR_RXCFG_ZLFDMA);
+}
+
+bool ath9k_hw_setcapability(struct ath_hal *ah,
+			    enum ath9k_capability_type type,
+			    u32 capability,
+			    u32 setting,
+			    int *status)
+{
+	struct ath_hal_5416 *ahp = AH5416(ah);
+	u32 v;
+
+	switch (type) {
+	case ATH9K_CAP_TKIP_MIC:
+		if (setting)
+			ahp->ah_staId1Defaults |=
+				AR_STA_ID1_CRPT_MIC_ENABLE;
+		else
+			ahp->ah_staId1Defaults &=
+				~AR_STA_ID1_CRPT_MIC_ENABLE;
+		return true;
+	case ATH9K_CAP_DIVERSITY:
+		v = REG_READ(ah, AR_PHY_CCK_DETECT);
+		if (setting)
+			v |= AR_PHY_CCK_DETECT_BB_ENABLE_ANT_FAST_DIV;
+		else
+			v &= ~AR_PHY_CCK_DETECT_BB_ENABLE_ANT_FAST_DIV;
+		REG_WRITE(ah, AR_PHY_CCK_DETECT, v);
+		return true;
+	case ATH9K_CAP_MCAST_KEYSRCH:
+		if (setting)
+			ahp->ah_staId1Defaults |= AR_STA_ID1_MCAST_KSRCH;
+		else
+			ahp->ah_staId1Defaults &= ~AR_STA_ID1_MCAST_KSRCH;
+		return true;
+	case ATH9K_CAP_TSF_ADJUST:
+		if (setting)
+			ahp->ah_miscMode |= AR_PCU_TX_ADD_TSF;
+		else
+			ahp->ah_miscMode &= ~AR_PCU_TX_ADD_TSF;
+		return true;
+	default:
+		return false;
+	}
+}
+
+void ath9k_hw_dmaRegDump(struct ath_hal *ah)
+{
+	u32 val[ATH9K_NUM_DMA_DEBUG_REGS];
+	int qcuOffset = 0, dcuOffset = 0;
+	u32 *qcuBase = &val[0], *dcuBase = &val[4];
+	int i;
+
+	REG_WRITE(ah, AR_MACMISC,
+		  ((AR_MACMISC_DMA_OBS_LINE_8 << AR_MACMISC_DMA_OBS_S) |
+		   (AR_MACMISC_MISC_OBS_BUS_1 <<
+		    AR_MACMISC_MISC_OBS_BUS_MSB_S)));
+
+	DPRINTF(ah->ah_sc, ATH_DBG_REG_IO, "Raw DMA Debug values:\n");
+	for (i = 0; i < ATH9K_NUM_DMA_DEBUG_REGS; i++) {
+		if (i % 4 == 0)
+			DPRINTF(ah->ah_sc, ATH_DBG_REG_IO, "\n");
+
+		val[i] = REG_READ(ah, AR_DMADBG_0 + (i * sizeof(u32)));
+		DPRINTF(ah->ah_sc, ATH_DBG_REG_IO, "%d: %08x ", i, val[i]);
+	}
+
+	DPRINTF(ah->ah_sc, ATH_DBG_REG_IO, "\n\n");
+	DPRINTF(ah->ah_sc, ATH_DBG_REG_IO,
+		 "Num QCU: chain_st fsp_ok fsp_st DCU: chain_st\n");
+
+	for (i = 0; i < ATH9K_NUM_QUEUES;
+	     i++, qcuOffset += 4, dcuOffset += 5) {
+		if (i == 8) {
+			qcuOffset = 0;
+			qcuBase++;
+		}
+
+		if (i == 6) {
+			dcuOffset = 0;
+			dcuBase++;
+		}
+
+		DPRINTF(ah->ah_sc, ATH_DBG_REG_IO,
+			 "%2d          %2x      %1x     %2x           %2x\n",
+			 i, (*qcuBase & (0x7 << qcuOffset)) >> qcuOffset,
+			 (*qcuBase & (0x8 << qcuOffset)) >> (qcuOffset +
+							     3),
+			 val[2] & (0x7 << (i * 3)) >> (i * 3),
+			 (*dcuBase & (0x1f << dcuOffset)) >> dcuOffset);
+	}
+
+	DPRINTF(ah->ah_sc, ATH_DBG_REG_IO, "\n");
+	DPRINTF(ah->ah_sc, ATH_DBG_REG_IO,
+		 "qcu_stitch state:   %2x    qcu_fetch state:        %2x\n",
+		 (val[3] & 0x003c0000) >> 18, (val[3] & 0x03c00000) >> 22);
+	DPRINTF(ah->ah_sc, ATH_DBG_REG_IO,
+		 "qcu_complete state: %2x    dcu_complete state:     %2x\n",
+		 (val[3] & 0x1c000000) >> 26, (val[6] & 0x3));
+	DPRINTF(ah->ah_sc, ATH_DBG_REG_IO,
+		 "dcu_arb state:      %2x    dcu_fp state:           %2x\n",
+		 (val[5] & 0x06000000) >> 25, (val[5] & 0x38000000) >> 27);
+	DPRINTF(ah->ah_sc, ATH_DBG_REG_IO,
+		 "chan_idle_dur:     %3d    chan_idle_dur_valid:     %1d\n",
+		 (val[6] & 0x000003fc) >> 2, (val[6] & 0x00000400) >> 10);
+	DPRINTF(ah->ah_sc, ATH_DBG_REG_IO,
+		 "txfifo_valid_0:      %1d    txfifo_valid_1:          %1d\n",
+		 (val[6] & 0x00000800) >> 11, (val[6] & 0x00001000) >> 12);
+	DPRINTF(ah->ah_sc, ATH_DBG_REG_IO,
+		 "txfifo_dcu_num_0:   %2d    txfifo_dcu_num_1:       %2d\n",
+		 (val[6] & 0x0001e000) >> 13, (val[6] & 0x001e0000) >> 17);
+
+	DPRINTF(ah->ah_sc, ATH_DBG_REG_IO, "pcu observe 0x%x \n",
+		REG_READ(ah, AR_OBS_BUS_1));
+	DPRINTF(ah->ah_sc, ATH_DBG_REG_IO,
+		"AR_CR 0x%x \n", REG_READ(ah, AR_CR));
+}
+
+u32 ath9k_hw_GetMibCycleCountsPct(struct ath_hal *ah,
+					u32 *rxc_pcnt,
+					u32 *rxf_pcnt,
+					u32 *txf_pcnt)
+{
+	static u32 cycles, rx_clear, rx_frame, tx_frame;
+	u32 good = 1;
+
+	u32 rc = REG_READ(ah, AR_RCCNT);
+	u32 rf = REG_READ(ah, AR_RFCNT);
+	u32 tf = REG_READ(ah, AR_TFCNT);
+	u32 cc = REG_READ(ah, AR_CCCNT);
+
+	if (cycles == 0 || cycles > cc) {
+		DPRINTF(ah->ah_sc, ATH_DBG_CHANNEL,
+			 "%s: cycle counter wrap. ExtBusy = 0\n",
+			 __func__);
+		good = 0;
+	} else {
+		u32 cc_d = cc - cycles;
+		u32 rc_d = rc - rx_clear;
+		u32 rf_d = rf - rx_frame;
+		u32 tf_d = tf - tx_frame;
+
+		if (cc_d != 0) {
+			*rxc_pcnt = rc_d * 100 / cc_d;
+			*rxf_pcnt = rf_d * 100 / cc_d;
+			*txf_pcnt = tf_d * 100 / cc_d;
+		} else {
+			good = 0;
+		}
+	}
+
+	cycles = cc;
+	rx_frame = rf;
+	rx_clear = rc;
+	tx_frame = tf;
+
+	return good;
+}
+
+void ath9k_hw_set11nmac2040(struct ath_hal *ah, enum ath9k_ht_macmode mode)
+{
+	u32 macmode;
+
+	if (mode == ATH9K_HT_MACMODE_2040 &&
+	    !ah->ah_config.cwm_ignore_extcca)
+		macmode = AR_2040_JOINED_RX_CLEAR;
+	else
+		macmode = 0;
+
+	REG_WRITE(ah, AR_2040_MODE, macmode);
+}
+
+static void ath9k_hw_mark_phy_inactive(struct ath_hal *ah)
+{
+	REG_WRITE(ah, AR_PHY_ACTIVE, AR_PHY_ACTIVE_DIS);
+}
+
+
+static struct ath_hal_5416 *ath9k_hw_newstate(u16 devid,
+					      struct ath_softc *sc,
+					      void __iomem *mem,
+					      int *status)
+{
+	static const u8 defbssidmask[ETH_ALEN] =
+		{ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff };
+	struct ath_hal_5416 *ahp;
+	struct ath_hal *ah;
+
+	ahp = kzalloc(sizeof(struct ath_hal_5416), GFP_KERNEL);
+	if (ahp == NULL) {
+		DPRINTF(sc, ATH_DBG_FATAL,
+			 "%s: cannot allocate memory for state block\n",
+			 __func__);
+		*status = -ENOMEM;
+		return NULL;
+	}
+
+	ah = &ahp->ah;
+
+	memcpy(&ahp->ah, &ar5416hal, sizeof(struct ath_hal));
+
+	ah->ah_sc = sc;
+	ah->ah_sh = mem;
+
+	ah->ah_devid = devid;
+	ah->ah_subvendorid = 0;
+
+	ah->ah_flags = 0;
+	if ((devid == AR5416_AR9100_DEVID))
+		ah->ah_macVersion = AR_SREV_VERSION_9100;
+	if (!AR_SREV_9100(ah))
+		ah->ah_flags = AH_USE_EEPROM;
+
+	ah->ah_powerLimit = MAX_RATE_POWER;
+	ah->ah_tpScale = ATH9K_TP_SCALE_MAX;
+
+	ahp->ah_atimWindow = 0;
+	ahp->ah_diversityControl = ah->ah_config.diversity_control;
+	ahp->ah_antennaSwitchSwap =
+		ah->ah_config.antenna_switch_swap;
+
+	ahp->ah_staId1Defaults = AR_STA_ID1_CRPT_MIC_ENABLE;
+	ahp->ah_beaconInterval = 100;
+	ahp->ah_enable32kHzClock = DONT_USE_32KHZ;
+	ahp->ah_slottime = (u32) -1;
+	ahp->ah_acktimeout = (u32) -1;
+	ahp->ah_ctstimeout = (u32) -1;
+	ahp->ah_globaltxtimeout = (u32) -1;
+	memcpy(&ahp->ah_bssidmask, defbssidmask, ETH_ALEN);
+
+	ahp->ah_gBeaconRate = 0;
+
+	return ahp;
+}
+
+static int ath9k_hw_eeprom_attach(struct ath_hal *ah)
+{
+	int status;
+
+	if (ath9k_hw_use_flash(ah))
+		ath9k_hw_flash_map(ah);
+
+	if (!ath9k_hw_fill_eeprom(ah))
+		return -EIO;
+
+	status = ath9k_hw_check_eeprom(ah);
+
+	return status;
+}
+
+u32 ath9k_hw_get_eeprom(struct ath_hal_5416 *ahp,
+			      enum eeprom_param param)
+{
+	struct ar5416_eeprom *eep = &ahp->ah_eeprom;
+	struct modal_eep_header *pModal = eep->modalHeader;
+	struct base_eep_header *pBase = &eep->baseEepHeader;
+
+	switch (param) {
+	case EEP_NFTHRESH_5:
+		return -pModal[0].noiseFloorThreshCh[0];
+	case EEP_NFTHRESH_2:
+		return -pModal[1].noiseFloorThreshCh[0];
+	case AR_EEPROM_MAC(0):
+		return pBase->macAddr[0] << 8 | pBase->macAddr[1];
+	case AR_EEPROM_MAC(1):
+		return pBase->macAddr[2] << 8 | pBase->macAddr[3];
+	case AR_EEPROM_MAC(2):
+		return pBase->macAddr[4] << 8 | pBase->macAddr[5];
+	case EEP_REG_0:
+		return pBase->regDmn[0];
+	case EEP_REG_1:
+		return pBase->regDmn[1];
+	case EEP_OP_CAP:
+		return pBase->deviceCap;
+	case EEP_OP_MODE:
+		return pBase->opCapFlags;
+	case EEP_RF_SILENT:
+		return pBase->rfSilent;
+	case EEP_OB_5:
+		return pModal[0].ob;
+	case EEP_DB_5:
+		return pModal[0].db;
+	case EEP_OB_2:
+		return pModal[1].ob;
+	case EEP_DB_2:
+		return pModal[1].db;
+	case EEP_MINOR_REV:
+		return pBase->version & AR5416_EEP_VER_MINOR_MASK;
+	case EEP_TX_MASK:
+		return pBase->txMask;
+	case EEP_RX_MASK:
+		return pBase->rxMask;
+	default:
+		return 0;
+	}
+}
+
+static inline int ath9k_hw_get_radiorev(struct ath_hal *ah)
+{
+	u32 val;
+	int i;
+
+	REG_WRITE(ah, AR_PHY(0x36), 0x00007058);
+	for (i = 0; i < 8; i++)
+		REG_WRITE(ah, AR_PHY(0x20), 0x00010000);
+	val = (REG_READ(ah, AR_PHY(256)) >> 24) & 0xff;
+	val = ((val & 0xf0) >> 4) | ((val & 0x0f) << 4);
+	return ath9k_hw_reverse_bits(val, 8);
+}
+
+static inline int ath9k_hw_init_macaddr(struct ath_hal *ah)
+{
+	u32 sum;
+	int i;
+	u16 eeval;
+	struct ath_hal_5416 *ahp = AH5416(ah);
+	DECLARE_MAC_BUF(mac);
+
+	sum = 0;
+	for (i = 0; i < 3; i++) {
+		eeval = ath9k_hw_get_eeprom(ahp, AR_EEPROM_MAC(i));
+		sum += eeval;
+		ahp->ah_macaddr[2 * i] = eeval >> 8;
+		ahp->ah_macaddr[2 * i + 1] = eeval & 0xff;
+	}
+	if (sum == 0 || sum == 0xffff * 3) {
+		DPRINTF(ah->ah_sc, ATH_DBG_EEPROM,
+			 "%s: mac address read failed: %s\n", __func__,
+			 print_mac(mac, ahp->ah_macaddr));
+		return -EADDRNOTAVAIL;
+	}
+
+	return 0;
+}
+
+static inline int16_t ath9k_hw_interpolate(u16 target,
+					   u16 srcLeft,
+					   u16 srcRight,
+					   int16_t targetLeft,
+					   int16_t targetRight)
+{
+	int16_t rv;
+
+	if (srcRight == srcLeft) {
+		rv = targetLeft;
+	} else {
+		rv = (int16_t) (((target - srcLeft) * targetRight +
+				 (srcRight - target) * targetLeft) /
+				(srcRight - srcLeft));
+	}
+	return rv;
+}
+
+static inline u16 ath9k_hw_fbin2freq(u8 fbin,
+					   bool is2GHz)
+{
+
+	if (fbin == AR5416_BCHAN_UNUSED)
+		return fbin;
+
+	return (u16) ((is2GHz) ? (2300 + fbin) : (4800 + 5 * fbin));
+}
+
+static u16 ath9k_hw_eeprom_get_spur_chan(struct ath_hal *ah,
+					       u16 i,
+					       bool is2GHz)
+{
+	struct ath_hal_5416 *ahp = AH5416(ah);
+	struct ar5416_eeprom *eep =
+		(struct ar5416_eeprom *) &ahp->ah_eeprom;
+	u16 spur_val = AR_NO_SPUR;
+
+	DPRINTF(ah->ah_sc, ATH_DBG_ANI,
+		 "Getting spur idx %d is2Ghz. %d val %x\n",
+		 i, is2GHz, ah->ah_config.spurchans[i][is2GHz]);
+
+	switch (ah->ah_config.spurmode) {
+	case SPUR_DISABLE:
+		break;
+	case SPUR_ENABLE_IOCTL:
+		spur_val = ah->ah_config.spurchans[i][is2GHz];
+		DPRINTF(ah->ah_sc, ATH_DBG_ANI,
+			 "Getting spur val from new loc. %d\n", spur_val);
+		break;
+	case SPUR_ENABLE_EEPROM:
+		spur_val = eep->modalHeader[is2GHz].spurChans[i].spurChan;
+		break;
+
+	}
+	return spur_val;
+}
+
+static inline int ath9k_hw_rfattach(struct ath_hal *ah)
+{
+	bool rfStatus = false;
+	int ecode = 0;
+
+	rfStatus = ath9k_hw_init_rf(ah, &ecode);
+	if (!rfStatus) {
+		DPRINTF(ah->ah_sc, ATH_DBG_RESET,
+			 "%s: RF setup failed, status %u\n", __func__,
+			 ecode);
+		return ecode;
+	}
+
+	return 0;
+}
+
+static int ath9k_hw_rf_claim(struct ath_hal *ah)
+{
+	u32 val;
+
+	REG_WRITE(ah, AR_PHY(0), 0x00000007);
+
+	val = ath9k_hw_get_radiorev(ah);
+	switch (val & AR_RADIO_SREV_MAJOR) {
+	case 0:
+		val = AR_RAD5133_SREV_MAJOR;
+		break;
+	case AR_RAD5133_SREV_MAJOR:
+	case AR_RAD5122_SREV_MAJOR:
+	case AR_RAD2133_SREV_MAJOR:
+	case AR_RAD2122_SREV_MAJOR:
+		break;
+	default:
+		DPRINTF(ah->ah_sc, ATH_DBG_CHANNEL,
+			 "%s: 5G Radio Chip Rev 0x%02X is not "
+			"supported by this driver\n",
+			 __func__, ah->ah_analog5GhzRev);
+		return -EOPNOTSUPP;
+	}
+
+	ah->ah_analog5GhzRev = val;
+
+	return 0;
+}
+
+static inline void ath9k_hw_init_pll(struct ath_hal *ah,
+				     struct ath9k_channel *chan)
+{
+	u32 pll;
+
+	if (AR_SREV_9100(ah)) {
+		if (chan && IS_CHAN_5GHZ(chan))
+			pll = 0x1450;
+		else
+			pll = 0x1458;
+	} else {
+		if (AR_SREV_9280_10_OR_LATER(ah)) {
+			pll = SM(0x5, AR_RTC_9160_PLL_REFDIV);
+
+			if (chan && IS_CHAN_HALF_RATE(chan))
+				pll |= SM(0x1, AR_RTC_9160_PLL_CLKSEL);
+			else if (chan && IS_CHAN_QUARTER_RATE(chan))
+				pll |= SM(0x2, AR_RTC_9160_PLL_CLKSEL);
+
+			if (chan && IS_CHAN_5GHZ(chan)) {
+				pll |= SM(0x28, AR_RTC_9160_PLL_DIV);
+
+
+				if (AR_SREV_9280_20(ah)) {
+					if (((chan->channel % 20) == 0)
+					    || ((chan->channel % 10) == 0))
+						pll = 0x2850;
+					else
+						pll = 0x142c;
+				}
+			} else {
+				pll |= SM(0x2c, AR_RTC_9160_PLL_DIV);
+			}
+
+		} else if (AR_SREV_9160_10_OR_LATER(ah)) {
+
+			pll = SM(0x5, AR_RTC_9160_PLL_REFDIV);
+
+			if (chan && IS_CHAN_HALF_RATE(chan))
+				pll |= SM(0x1, AR_RTC_9160_PLL_CLKSEL);
+			else if (chan && IS_CHAN_QUARTER_RATE(chan))
+				pll |= SM(0x2, AR_RTC_9160_PLL_CLKSEL);
+
+			if (chan && IS_CHAN_5GHZ(chan))
+				pll |= SM(0x50, AR_RTC_9160_PLL_DIV);
+			else
+				pll |= SM(0x58, AR_RTC_9160_PLL_DIV);
+		} else {
+			pll = AR_RTC_PLL_REFDIV_5 | AR_RTC_PLL_DIV2;
+
+			if (chan && IS_CHAN_HALF_RATE(chan))
+				pll |= SM(0x1, AR_RTC_PLL_CLKSEL);
+			else if (chan && IS_CHAN_QUARTER_RATE(chan))
+				pll |= SM(0x2, AR_RTC_PLL_CLKSEL);
+
+			if (chan && IS_CHAN_5GHZ(chan))
+				pll |= SM(0xa, AR_RTC_PLL_DIV);
+			else
+				pll |= SM(0xb, AR_RTC_PLL_DIV);
+		}
+	}
+	REG_WRITE(ah, (u16) (AR_RTC_PLL_CONTROL), pll);
+
+	udelay(RTC_PLL_SETTLE_DELAY);
+
+	REG_WRITE(ah, AR_RTC_SLEEP_CLK, AR_RTC_FORCE_DERIVED_CLK);
+}
+
+static void ath9k_hw_set_regs(struct ath_hal *ah, struct ath9k_channel *chan,
+			      enum ath9k_ht_macmode macmode)
+{
+	u32 phymode;
+	struct ath_hal_5416 *ahp = AH5416(ah);
+
+	phymode = AR_PHY_FC_HT_EN | AR_PHY_FC_SHORT_GI_40
+		| AR_PHY_FC_SINGLE_HT_LTF1 | AR_PHY_FC_WALSH;
+
+	if (IS_CHAN_HT40(chan)) {
+		phymode |= AR_PHY_FC_DYN2040_EN;
+
+		if ((chan->chanmode == CHANNEL_A_HT40PLUS) ||
+		    (chan->chanmode == CHANNEL_G_HT40PLUS))
+			phymode |= AR_PHY_FC_DYN2040_PRI_CH;
+
+		if (ahp->ah_extprotspacing == ATH9K_HT_EXTPROTSPACING_25)
+			phymode |= AR_PHY_FC_DYN2040_EXT_CH;
+	}
+	REG_WRITE(ah, AR_PHY_TURBO, phymode);
+
+	ath9k_hw_set11nmac2040(ah, macmode);
+
+	REG_WRITE(ah, AR_GTXTO, 25 << AR_GTXTO_TIMEOUT_LIMIT_S);
+	REG_WRITE(ah, AR_CST, 0xF << AR_CST_TIMEOUT_LIMIT_S);
+}
+
+static void ath9k_hw_set_operating_mode(struct ath_hal *ah, int opmode)
+{
+	u32 val;
+
+	val = REG_READ(ah, AR_STA_ID1);
+	val &= ~(AR_STA_ID1_STA_AP | AR_STA_ID1_ADHOC);
+	switch (opmode) {
+	case ATH9K_M_HOSTAP:
+		REG_WRITE(ah, AR_STA_ID1, val | AR_STA_ID1_STA_AP
+			  | AR_STA_ID1_KSRCH_MODE);
+		REG_CLR_BIT(ah, AR_CFG, AR_CFG_AP_ADHOC_INDICATION);
+		break;
+	case ATH9K_M_IBSS:
+		REG_WRITE(ah, AR_STA_ID1, val | AR_STA_ID1_ADHOC
+			  | AR_STA_ID1_KSRCH_MODE);
+		REG_SET_BIT(ah, AR_CFG, AR_CFG_AP_ADHOC_INDICATION);
+		break;
+	case ATH9K_M_STA:
+	case ATH9K_M_MONITOR:
+		REG_WRITE(ah, AR_STA_ID1, val | AR_STA_ID1_KSRCH_MODE);
+		break;
+	}
+}
+
+static inline void
+ath9k_hw_set_rfmode(struct ath_hal *ah, struct ath9k_channel *chan)
+{
+	u32 rfMode = 0;
+
+	if (chan == NULL)
+		return;
+
+	rfMode |= (IS_CHAN_B(chan) || IS_CHAN_G(chan))
+		? AR_PHY_MODE_DYNAMIC : AR_PHY_MODE_OFDM;
+
+	if (!AR_SREV_9280_10_OR_LATER(ah))
+		rfMode |= (IS_CHAN_5GHZ(chan)) ? AR_PHY_MODE_RF5GHZ :
+			AR_PHY_MODE_RF2GHZ;
+
+	if (AR_SREV_9280_20(ah) && IS_CHAN_A_5MHZ_SPACED(chan))
+		rfMode |= (AR_PHY_MODE_DYNAMIC | AR_PHY_MODE_DYN_CCK_DISABLE);
+
+	REG_WRITE(ah, AR_PHY_MODE, rfMode);
+}
+
+static bool ath9k_hw_set_reset(struct ath_hal *ah, int type)
+{
+	u32 rst_flags;
+	u32 tmpReg;
+
+	REG_WRITE(ah, AR_RTC_FORCE_WAKE, AR_RTC_FORCE_WAKE_EN |
+		  AR_RTC_FORCE_WAKE_ON_INT);
+
+	if (AR_SREV_9100(ah)) {
+		rst_flags = AR_RTC_RC_MAC_WARM | AR_RTC_RC_MAC_COLD |
+			AR_RTC_RC_COLD_RESET | AR_RTC_RC_WARM_RESET;
+	} else {
+		tmpReg = REG_READ(ah, AR_INTR_SYNC_CAUSE);
+		if (tmpReg &
+		    (AR_INTR_SYNC_LOCAL_TIMEOUT |
+		     AR_INTR_SYNC_RADM_CPL_TIMEOUT)) {
+			REG_WRITE(ah, AR_INTR_SYNC_ENABLE, 0);
+			REG_WRITE(ah, AR_RC, AR_RC_AHB | AR_RC_HOSTIF);
+		} else {
+			REG_WRITE(ah, AR_RC, AR_RC_AHB);
+		}
+
+		rst_flags = AR_RTC_RC_MAC_WARM;
+		if (type == ATH9K_RESET_COLD)
+			rst_flags |= AR_RTC_RC_MAC_COLD;
+	}
+
+	REG_WRITE(ah, (u16) (AR_RTC_RC), rst_flags);
+	udelay(50);
+
+	REG_WRITE(ah, (u16) (AR_RTC_RC), 0);
+	if (!ath9k_hw_wait(ah, (u16) (AR_RTC_RC), AR_RTC_RC_M, 0)) {
+		DPRINTF(ah->ah_sc, ATH_DBG_RESET,
+			"%s: RTC stuck in MAC reset\n",
+			__func__);
+		return false;
+	}
+
+	if (!AR_SREV_9100(ah))
+		REG_WRITE(ah, AR_RC, 0);
+
+	ath9k_hw_init_pll(ah, NULL);
+
+	if (AR_SREV_9100(ah))
+		udelay(50);
+
+	return true;
+}
+
+static inline bool ath9k_hw_set_reset_power_on(struct ath_hal *ah)
+{
+	REG_WRITE(ah, AR_RTC_FORCE_WAKE, AR_RTC_FORCE_WAKE_EN |
+		  AR_RTC_FORCE_WAKE_ON_INT);
+
+	REG_WRITE(ah, (u16) (AR_RTC_RESET), 0);
+	REG_WRITE(ah, (u16) (AR_RTC_RESET), 1);
+
+	if (!ath9k_hw_wait(ah,
+			   AR_RTC_STATUS,
+			   AR_RTC_STATUS_M,
+			   AR_RTC_STATUS_ON)) {
+		DPRINTF(ah->ah_sc, ATH_DBG_RESET, "%s: RTC not waking up\n",
+			 __func__);
+		return false;
+	}
+
+	ath9k_hw_read_revisions(ah);
+
+	return ath9k_hw_set_reset(ah, ATH9K_RESET_WARM);
+}
+
+static bool ath9k_hw_set_reset_reg(struct ath_hal *ah,
+				   u32 type)
+{
+	REG_WRITE(ah, AR_RTC_FORCE_WAKE,
+		  AR_RTC_FORCE_WAKE_EN | AR_RTC_FORCE_WAKE_ON_INT);
+
+	switch (type) {
+	case ATH9K_RESET_POWER_ON:
+		return ath9k_hw_set_reset_power_on(ah);
+		break;
+	case ATH9K_RESET_WARM:
+	case ATH9K_RESET_COLD:
+		return ath9k_hw_set_reset(ah, type);
+		break;
+	default:
+		return false;
+	}
+}
+
+static inline
+struct ath9k_channel *ath9k_hw_check_chan(struct ath_hal *ah,
+					  struct ath9k_channel *chan)
+{
+	if (!(IS_CHAN_2GHZ(chan) ^ IS_CHAN_5GHZ(chan))) {
+		DPRINTF(ah->ah_sc, ATH_DBG_CHANNEL,
+			 "%s: invalid channel %u/0x%x; not marked as "
+			 "2GHz or 5GHz\n", __func__, chan->channel,
+			 chan->channelFlags);
+		return NULL;
+	}
+
+	if (!IS_CHAN_OFDM(chan) &&
+	      !IS_CHAN_CCK(chan) &&
+	      !IS_CHAN_HT20(chan) &&
+	      !IS_CHAN_HT40(chan)) {
+		DPRINTF(ah->ah_sc, ATH_DBG_CHANNEL,
+			"%s: invalid channel %u/0x%x; not marked as "
+			"OFDM or CCK or HT20 or HT40PLUS or HT40MINUS\n",
+			__func__, chan->channel, chan->channelFlags);
+		return NULL;
+	}
+
+	return ath9k_regd_check_channel(ah, chan);
+}
+
+static inline bool
+ath9k_hw_get_lower_upper_index(u8 target,
+			       u8 *pList,
+			       u16 listSize,
+			       u16 *indexL,
+			       u16 *indexR)
+{
+	u16 i;
+
+	if (target <= pList[0]) {
+		*indexL = *indexR = 0;
+		return true;
+	}
+	if (target >= pList[listSize - 1]) {
+		*indexL = *indexR = (u16) (listSize - 1);
+		return true;
+	}
+
+	for (i = 0; i < listSize - 1; i++) {
+		if (pList[i] == target) {
+			*indexL = *indexR = i;
+			return true;
+		}
+		if (target < pList[i + 1]) {
+			*indexL = i;
+			*indexR = (u16) (i + 1);
+			return false;
+		}
+	}
+	return false;
+}
+
+static int16_t ath9k_hw_get_nf_hist_mid(int16_t *nfCalBuffer)
+{
+	int16_t nfval;
+	int16_t sort[ATH9K_NF_CAL_HIST_MAX];
+	int i, j;
+
+	for (i = 0; i < ATH9K_NF_CAL_HIST_MAX; i++)
+		sort[i] = nfCalBuffer[i];
+
+	for (i = 0; i < ATH9K_NF_CAL_HIST_MAX - 1; i++) {
+		for (j = 1; j < ATH9K_NF_CAL_HIST_MAX - i; j++) {
+			if (sort[j] > sort[j - 1]) {
+				nfval = sort[j];
+				sort[j] = sort[j - 1];
+				sort[j - 1] = nfval;
+			}
+		}
+	}
+	nfval = sort[(ATH9K_NF_CAL_HIST_MAX - 1) >> 1];
+
+	return nfval;
+}
+
+static void ath9k_hw_update_nfcal_hist_buffer(struct ath9k_nfcal_hist *h,
+					      int16_t *nfarray)
+{
+	int i;
+
+	for (i = 0; i < NUM_NF_READINGS; i++) {
+		h[i].nfCalBuffer[h[i].currIndex] = nfarray[i];
+
+		if (++h[i].currIndex >= ATH9K_NF_CAL_HIST_MAX)
+			h[i].currIndex = 0;
+
+		if (h[i].invalidNFcount > 0) {
+			if (nfarray[i] < AR_PHY_CCA_MIN_BAD_VALUE
+			    || nfarray[i] > AR_PHY_CCA_MAX_HIGH_VALUE) {
+				h[i].invalidNFcount = ATH9K_NF_CAL_HIST_MAX;
+			} else {
+				h[i].invalidNFcount--;
+				h[i].privNF = nfarray[i];
+			}
+		} else {
+			h[i].privNF =
+				ath9k_hw_get_nf_hist_mid(h[i].nfCalBuffer);
+		}
+	}
+	return;
+}
+
+static void ar5416GetNoiseFloor(struct ath_hal *ah,
+				int16_t nfarray[NUM_NF_READINGS])
+{
+	int16_t nf;
+
+	if (AR_SREV_9280_10_OR_LATER(ah))
+		nf = MS(REG_READ(ah, AR_PHY_CCA), AR9280_PHY_MINCCA_PWR);
+	else
+		nf = MS(REG_READ(ah, AR_PHY_CCA), AR_PHY_MINCCA_PWR);
+
+	if (nf & 0x100)
+		nf = 0 - ((nf ^ 0x1ff) + 1);
+	DPRINTF(ah->ah_sc, ATH_DBG_CALIBRATE,
+		 "NF calibrated [ctl] [chain 0] is %d\n", nf);
+	nfarray[0] = nf;
+
+	if (AR_SREV_9280_10_OR_LATER(ah))
+		nf = MS(REG_READ(ah, AR_PHY_CH1_CCA),
+			AR9280_PHY_CH1_MINCCA_PWR);
+	else
+		nf = MS(REG_READ(ah, AR_PHY_CH1_CCA),
+			AR_PHY_CH1_MINCCA_PWR);
+
+	if (nf & 0x100)
+		nf = 0 - ((nf ^ 0x1ff) + 1);
+	DPRINTF(ah->ah_sc, ATH_DBG_NF_CAL,
+		 "NF calibrated [ctl] [chain 1] is %d\n", nf);
+	nfarray[1] = nf;
+
+	if (!AR_SREV_9280(ah)) {
+		nf = MS(REG_READ(ah, AR_PHY_CH2_CCA),
+			AR_PHY_CH2_MINCCA_PWR);
+		if (nf & 0x100)
+			nf = 0 - ((nf ^ 0x1ff) + 1);
+		DPRINTF(ah->ah_sc, ATH_DBG_NF_CAL,
+			 "NF calibrated [ctl] [chain 2] is %d\n", nf);
+		nfarray[2] = nf;
+	}
+
+	if (AR_SREV_9280_10_OR_LATER(ah))
+		nf = MS(REG_READ(ah, AR_PHY_EXT_CCA),
+			AR9280_PHY_EXT_MINCCA_PWR);
+	else
+		nf = MS(REG_READ(ah, AR_PHY_EXT_CCA),
+			AR_PHY_EXT_MINCCA_PWR);
+
+	if (nf & 0x100)
+		nf = 0 - ((nf ^ 0x1ff) + 1);
+	DPRINTF(ah->ah_sc, ATH_DBG_NF_CAL,
+		 "NF calibrated [ext] [chain 0] is %d\n", nf);
+	nfarray[3] = nf;
+
+	if (AR_SREV_9280_10_OR_LATER(ah))
+		nf = MS(REG_READ(ah, AR_PHY_CH1_EXT_CCA),
+			AR9280_PHY_CH1_EXT_MINCCA_PWR);
+	else
+		nf = MS(REG_READ(ah, AR_PHY_CH1_EXT_CCA),
+			AR_PHY_CH1_EXT_MINCCA_PWR);
+
+	if (nf & 0x100)
+		nf = 0 - ((nf ^ 0x1ff) + 1);
+	DPRINTF(ah->ah_sc, ATH_DBG_CALIBRATE,
+		 "NF calibrated [ext] [chain 1] is %d\n", nf);
+	nfarray[4] = nf;
+
+	if (!AR_SREV_9280(ah)) {
+		nf = MS(REG_READ(ah, AR_PHY_CH2_EXT_CCA),
+			AR_PHY_CH2_EXT_MINCCA_PWR);
+		if (nf & 0x100)
+			nf = 0 - ((nf ^ 0x1ff) + 1);
+		DPRINTF(ah->ah_sc, ATH_DBG_NF_CAL,
+			 "NF calibrated [ext] [chain 2] is %d\n", nf);
+		nfarray[5] = nf;
+	}
+}
+
+static bool
+getNoiseFloorThresh(struct ath_hal *ah,
+		    const struct ath9k_channel *chan,
+		    int16_t *nft)
+{
+	struct ath_hal_5416 *ahp = AH5416(ah);
+
+	switch (chan->chanmode) {
+	case CHANNEL_A:
+	case CHANNEL_A_HT20:
+	case CHANNEL_A_HT40PLUS:
+	case CHANNEL_A_HT40MINUS:
+		*nft = (int16_t) ath9k_hw_get_eeprom(ahp, EEP_NFTHRESH_5);
+		break;
+	case CHANNEL_B:
+	case CHANNEL_G:
+	case CHANNEL_G_HT20:
+	case CHANNEL_G_HT40PLUS:
+	case CHANNEL_G_HT40MINUS:
+		*nft = (int16_t) ath9k_hw_get_eeprom(ahp, EEP_NFTHRESH_2);
+		break;
+	default:
+		DPRINTF(ah->ah_sc, ATH_DBG_CHANNEL,
+			 "%s: invalid channel flags 0x%x\n", __func__,
+			 chan->channelFlags);
+		return false;
+	}
+	return true;
+}
+
+static void ath9k_hw_start_nfcal(struct ath_hal *ah)
+{
+	REG_SET_BIT(ah, AR_PHY_AGC_CONTROL,
+		    AR_PHY_AGC_CONTROL_ENABLE_NF);
+	REG_SET_BIT(ah, AR_PHY_AGC_CONTROL,
+		    AR_PHY_AGC_CONTROL_NO_UPDATE_NF);
+	REG_SET_BIT(ah, AR_PHY_AGC_CONTROL, AR_PHY_AGC_CONTROL_NF);
+}
+
+static void
+ath9k_hw_loadnf(struct ath_hal *ah, struct ath9k_channel *chan)
+{
+	struct ath9k_nfcal_hist *h;
+	int i, j;
+	int32_t val;
+	const u32 ar5416_cca_regs[6] = {
+		AR_PHY_CCA,
+		AR_PHY_CH1_CCA,
+		AR_PHY_CH2_CCA,
+		AR_PHY_EXT_CCA,
+		AR_PHY_CH1_EXT_CCA,
+		AR_PHY_CH2_EXT_CCA
+	};
+	u8 chainmask;
+
+	if (AR_SREV_9280(ah))
+		chainmask = 0x1B;
+	else
+		chainmask = 0x3F;
+
+#ifdef ATH_NF_PER_CHAN
+	h = chan->nfCalHist;
+#else
+	h = ah->nfCalHist;
+#endif
+
+	for (i = 0; i < NUM_NF_READINGS; i++) {
+		if (chainmask & (1 << i)) {
+			val = REG_READ(ah, ar5416_cca_regs[i]);
+			val &= 0xFFFFFE00;
+			val |= (((u32) (h[i].privNF) << 1) & 0x1ff);
+			REG_WRITE(ah, ar5416_cca_regs[i], val);
+		}
+	}
+
+	REG_CLR_BIT(ah, AR_PHY_AGC_CONTROL,
+		    AR_PHY_AGC_CONTROL_ENABLE_NF);
+	REG_CLR_BIT(ah, AR_PHY_AGC_CONTROL,
+		    AR_PHY_AGC_CONTROL_NO_UPDATE_NF);
+	REG_SET_BIT(ah, AR_PHY_AGC_CONTROL, AR_PHY_AGC_CONTROL_NF);
+
+	for (j = 0; j < 1000; j++) {
+		if ((REG_READ(ah, AR_PHY_AGC_CONTROL) &
+		     AR_PHY_AGC_CONTROL_NF) == 0)
+			break;
+		udelay(10);
+	}
+
+	for (i = 0; i < NUM_NF_READINGS; i++) {
+		if (chainmask & (1 << i)) {
+			val = REG_READ(ah, ar5416_cca_regs[i]);
+			val &= 0xFFFFFE00;
+			val |= (((u32) (-50) << 1) & 0x1ff);
+			REG_WRITE(ah, ar5416_cca_regs[i], val);
+		}
+	}
+}
+
+static int16_t ath9k_hw_getnf(struct ath_hal *ah,
+			      struct ath9k_channel *chan)
+{
+	int16_t nf, nfThresh;
+	int16_t nfarray[NUM_NF_READINGS] = { 0 };
+	struct ath9k_nfcal_hist *h;
+	u8 chainmask;
+
+	if (AR_SREV_9280(ah))
+		chainmask = 0x1B;
+	else
+		chainmask = 0x3F;
+
+	chan->channelFlags &= (~CHANNEL_CW_INT);
+	if (REG_READ(ah, AR_PHY_AGC_CONTROL) & AR_PHY_AGC_CONTROL_NF) {
+		DPRINTF(ah->ah_sc, ATH_DBG_CALIBRATE,
+			 "%s: NF did not complete in calibration window\n",
+			 __func__);
+		nf = 0;
+		chan->rawNoiseFloor = nf;
+		return chan->rawNoiseFloor;
+	} else {
+		ar5416GetNoiseFloor(ah, nfarray);
+		nf = nfarray[0];
+		if (getNoiseFloorThresh(ah, chan, &nfThresh)
+		    && nf > nfThresh) {
+			DPRINTF(ah->ah_sc, ATH_DBG_CALIBRATE,
+				 "%s: noise floor failed detected; "
+				 "detected %d, threshold %d\n", __func__,
+				 nf, nfThresh);
+			chan->channelFlags |= CHANNEL_CW_INT;
+		}
+	}
+
+#ifdef ATH_NF_PER_CHAN
+	h = chan->nfCalHist;
+#else
+	h = ah->nfCalHist;
+#endif
+
+	ath9k_hw_update_nfcal_hist_buffer(h, nfarray);
+	chan->rawNoiseFloor = h[0].privNF;
+
+	return chan->rawNoiseFloor;
+}
+
+static void ath9k_hw_update_mibstats(struct ath_hal *ah,
+			      struct ath9k_mib_stats *stats)
+{
+	stats->ackrcv_bad += REG_READ(ah, AR_ACK_FAIL);
+	stats->rts_bad += REG_READ(ah, AR_RTS_FAIL);
+	stats->fcs_bad += REG_READ(ah, AR_FCS_FAIL);
+	stats->rts_good += REG_READ(ah, AR_RTS_OK);
+	stats->beacons += REG_READ(ah, AR_BEACON_CNT);
+}
+
+static void ath9k_enable_mib_counters(struct ath_hal *ah)
+{
+	struct ath_hal_5416 *ahp = AH5416(ah);
+
+	DPRINTF(ah->ah_sc, ATH_DBG_ANI, "Enable mib counters\n");
+
+	ath9k_hw_update_mibstats(ah, &ahp->ah_mibStats);
+
+	REG_WRITE(ah, AR_FILT_OFDM, 0);
+	REG_WRITE(ah, AR_FILT_CCK, 0);
+	REG_WRITE(ah, AR_MIBC,
+		  ~(AR_MIBC_COW | AR_MIBC_FMC | AR_MIBC_CMC | AR_MIBC_MCS)
+		  & 0x0f);
+	REG_WRITE(ah, AR_PHY_ERR_MASK_1, AR_PHY_ERR_OFDM_TIMING);
+	REG_WRITE(ah, AR_PHY_ERR_MASK_2, AR_PHY_ERR_CCK_TIMING);
+}
+
+static void ath9k_hw_disable_mib_counters(struct ath_hal *ah)
+{
+	struct ath_hal_5416 *ahp = AH5416(ah);
+
+	DPRINTF(ah->ah_sc, ATH_DBG_ANI, "Disabling MIB counters\n");
+
+	REG_WRITE(ah, AR_MIBC, AR_MIBC_FMC | AR_MIBC_CMC);
+
+	ath9k_hw_update_mibstats(ah, &ahp->ah_mibStats);
+
+	REG_WRITE(ah, AR_FILT_OFDM, 0);
+	REG_WRITE(ah, AR_FILT_CCK, 0);
+}
+
+static int ath9k_hw_get_ani_channel_idx(struct ath_hal *ah,
+					struct ath9k_channel *chan)
+{
+	struct ath_hal_5416 *ahp = AH5416(ah);
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(ahp->ah_ani); i++) {
+		if (ahp->ah_ani[i].c.channel == chan->channel)
+			return i;
+		if (ahp->ah_ani[i].c.channel == 0) {
+			ahp->ah_ani[i].c.channel = chan->channel;
+			ahp->ah_ani[i].c.channelFlags = chan->channelFlags;
+			return i;
+		}
+	}
+
+	DPRINTF(ah->ah_sc, ATH_DBG_ANI,
+		 "No more channel states left. Using channel 0\n");
+	return 0;
+}
+
+static void ath9k_hw_ani_attach(struct ath_hal *ah)
+{
+	struct ath_hal_5416 *ahp = AH5416(ah);
+	int i;
+
+	ahp->ah_hasHwPhyCounters = 1;
+
+	memset(ahp->ah_ani, 0, sizeof(ahp->ah_ani));
+	for (i = 0; i < ARRAY_SIZE(ahp->ah_ani); i++) {
+		ahp->ah_ani[i].ofdmTrigHigh = ATH9K_ANI_OFDM_TRIG_HIGH;
+		ahp->ah_ani[i].ofdmTrigLow = ATH9K_ANI_OFDM_TRIG_LOW;
+		ahp->ah_ani[i].cckTrigHigh = ATH9K_ANI_CCK_TRIG_HIGH;
+		ahp->ah_ani[i].cckTrigLow = ATH9K_ANI_CCK_TRIG_LOW;
+		ahp->ah_ani[i].rssiThrHigh = ATH9K_ANI_RSSI_THR_HIGH;
+		ahp->ah_ani[i].rssiThrLow = ATH9K_ANI_RSSI_THR_LOW;
+		ahp->ah_ani[i].ofdmWeakSigDetectOff =
+			!ATH9K_ANI_USE_OFDM_WEAK_SIG;
+		ahp->ah_ani[i].cckWeakSigThreshold =
+			ATH9K_ANI_CCK_WEAK_SIG_THR;
+		ahp->ah_ani[i].spurImmunityLevel = ATH9K_ANI_SPUR_IMMUNE_LVL;
+		ahp->ah_ani[i].firstepLevel = ATH9K_ANI_FIRSTEP_LVL;
+		if (ahp->ah_hasHwPhyCounters) {
+			ahp->ah_ani[i].ofdmPhyErrBase =
+				AR_PHY_COUNTMAX - ATH9K_ANI_OFDM_TRIG_HIGH;
+			ahp->ah_ani[i].cckPhyErrBase =
+				AR_PHY_COUNTMAX - ATH9K_ANI_CCK_TRIG_HIGH;
+		}
+	}
+	if (ahp->ah_hasHwPhyCounters) {
+		DPRINTF(ah->ah_sc, ATH_DBG_ANI,
+			"Setting OfdmErrBase = 0x%08x\n",
+			ahp->ah_ani[0].ofdmPhyErrBase);
+		DPRINTF(ah->ah_sc, ATH_DBG_ANI, "Setting cckErrBase = 0x%08x\n",
+			ahp->ah_ani[0].cckPhyErrBase);
+
+		REG_WRITE(ah, AR_PHY_ERR_1, ahp->ah_ani[0].ofdmPhyErrBase);
+		REG_WRITE(ah, AR_PHY_ERR_2, ahp->ah_ani[0].cckPhyErrBase);
+		ath9k_enable_mib_counters(ah);
+	}
+	ahp->ah_aniPeriod = ATH9K_ANI_PERIOD;
+	if (ah->ah_config.enable_ani)
+		ahp->ah_procPhyErr |= HAL_PROCESS_ANI;
+}
+
+static inline void ath9k_hw_ani_setup(struct ath_hal *ah)
+{
+	struct ath_hal_5416 *ahp = AH5416(ah);
+	int i;
+
+	const int totalSizeDesired[] = { -55, -55, -55, -55, -62 };
+	const int coarseHigh[] = { -14, -14, -14, -14, -12 };
+	const int coarseLow[] = { -64, -64, -64, -64, -70 };
+	const int firpwr[] = { -78, -78, -78, -78, -80 };
+
+	for (i = 0; i < 5; i++) {
+		ahp->ah_totalSizeDesired[i] = totalSizeDesired[i];
+		ahp->ah_coarseHigh[i] = coarseHigh[i];
+		ahp->ah_coarseLow[i] = coarseLow[i];
+		ahp->ah_firpwr[i] = firpwr[i];
+	}
+}
+
+static void ath9k_hw_ani_detach(struct ath_hal *ah)
+{
+	struct ath_hal_5416 *ahp = AH5416(ah);
+
+	DPRINTF(ah->ah_sc, ATH_DBG_ANI, "Detaching Ani\n");
+	if (ahp->ah_hasHwPhyCounters) {
+		ath9k_hw_disable_mib_counters(ah);
+		REG_WRITE(ah, AR_PHY_ERR_1, 0);
+		REG_WRITE(ah, AR_PHY_ERR_2, 0);
+	}
+}
+
+
+static bool ath9k_hw_ani_control(struct ath_hal *ah,
+				 enum ath9k_ani_cmd cmd, int param)
+{
+	struct ath_hal_5416 *ahp = AH5416(ah);
+	struct ar5416AniState *aniState = ahp->ah_curani;
+
+	switch (cmd & ahp->ah_ani_function) {
+	case ATH9K_ANI_NOISE_IMMUNITY_LEVEL:{
+		u32 level = param;
+
+		if (level >= ARRAY_SIZE(ahp->ah_totalSizeDesired)) {
+			DPRINTF(ah->ah_sc, ATH_DBG_ANI,
+				 "%s: level out of range (%u > %u)\n",
+				 __func__, level,
+				 (unsigned) ARRAY_SIZE(ahp->
+						       ah_totalSizeDesired));
+			return false;
+		}
+
+		REG_RMW_FIELD(ah, AR_PHY_DESIRED_SZ,
+			      AR_PHY_DESIRED_SZ_TOT_DES,
+			      ahp->ah_totalSizeDesired[level]);
+		REG_RMW_FIELD(ah, AR_PHY_AGC_CTL1,
+			      AR_PHY_AGC_CTL1_COARSE_LOW,
+			      ahp->ah_coarseLow[level]);
+		REG_RMW_FIELD(ah, AR_PHY_AGC_CTL1,
+			      AR_PHY_AGC_CTL1_COARSE_HIGH,
+			      ahp->ah_coarseHigh[level]);
+		REG_RMW_FIELD(ah, AR_PHY_FIND_SIG,
+			      AR_PHY_FIND_SIG_FIRPWR,
+			      ahp->ah_firpwr[level]);
+
+		if (level > aniState->noiseImmunityLevel)
+			ahp->ah_stats.ast_ani_niup++;
+		else if (level < aniState->noiseImmunityLevel)
+			ahp->ah_stats.ast_ani_nidown++;
+		aniState->noiseImmunityLevel = level;
+		break;
+	}
+	case ATH9K_ANI_OFDM_WEAK_SIGNAL_DETECTION:{
+		const int m1ThreshLow[] = { 127, 50 };
+		const int m2ThreshLow[] = { 127, 40 };
+		const int m1Thresh[] = { 127, 0x4d };
+		const int m2Thresh[] = { 127, 0x40 };
+		const int m2CountThr[] = { 31, 16 };
+		const int m2CountThrLow[] = { 63, 48 };
+		u32 on = param ? 1 : 0;
+
+		REG_RMW_FIELD(ah, AR_PHY_SFCORR_LOW,
+			      AR_PHY_SFCORR_LOW_M1_THRESH_LOW,
+			      m1ThreshLow[on]);
+		REG_RMW_FIELD(ah, AR_PHY_SFCORR_LOW,
+			      AR_PHY_SFCORR_LOW_M2_THRESH_LOW,
+			      m2ThreshLow[on]);
+		REG_RMW_FIELD(ah, AR_PHY_SFCORR,
+			      AR_PHY_SFCORR_M1_THRESH,
+			      m1Thresh[on]);
+		REG_RMW_FIELD(ah, AR_PHY_SFCORR,
+			      AR_PHY_SFCORR_M2_THRESH,
+			      m2Thresh[on]);
+		REG_RMW_FIELD(ah, AR_PHY_SFCORR,
+			      AR_PHY_SFCORR_M2COUNT_THR,
+			      m2CountThr[on]);
+		REG_RMW_FIELD(ah, AR_PHY_SFCORR_LOW,
+			      AR_PHY_SFCORR_LOW_M2COUNT_THR_LOW,
+			      m2CountThrLow[on]);
+
+		REG_RMW_FIELD(ah, AR_PHY_SFCORR_EXT,
+			      AR_PHY_SFCORR_EXT_M1_THRESH_LOW,
+			      m1ThreshLow[on]);
+		REG_RMW_FIELD(ah, AR_PHY_SFCORR_EXT,
+			      AR_PHY_SFCORR_EXT_M2_THRESH_LOW,
+			      m2ThreshLow[on]);
+		REG_RMW_FIELD(ah, AR_PHY_SFCORR_EXT,
+			      AR_PHY_SFCORR_EXT_M1_THRESH,
+			      m1Thresh[on]);
+		REG_RMW_FIELD(ah, AR_PHY_SFCORR_EXT,
+			      AR_PHY_SFCORR_EXT_M2_THRESH,
+			      m2Thresh[on]);
+
+		if (on)
+			REG_SET_BIT(ah, AR_PHY_SFCORR_LOW,
+				    AR_PHY_SFCORR_LOW_USE_SELF_CORR_LOW);
+		else
+			REG_CLR_BIT(ah, AR_PHY_SFCORR_LOW,
+				    AR_PHY_SFCORR_LOW_USE_SELF_CORR_LOW);
+
+		if (!on != aniState->ofdmWeakSigDetectOff) {
+			if (on)
+				ahp->ah_stats.ast_ani_ofdmon++;
+			else
+				ahp->ah_stats.ast_ani_ofdmoff++;
+			aniState->ofdmWeakSigDetectOff = !on;
+		}
+		break;
+	}
+	case ATH9K_ANI_CCK_WEAK_SIGNAL_THR:{
+		const int weakSigThrCck[] = { 8, 6 };
+		u32 high = param ? 1 : 0;
+
+		REG_RMW_FIELD(ah, AR_PHY_CCK_DETECT,
+			      AR_PHY_CCK_DETECT_WEAK_SIG_THR_CCK,
+			      weakSigThrCck[high]);
+		if (high != aniState->cckWeakSigThreshold) {
+			if (high)
+				ahp->ah_stats.ast_ani_cckhigh++;
+			else
+				ahp->ah_stats.ast_ani_ccklow++;
+			aniState->cckWeakSigThreshold = high;
+		}
+		break;
+	}
+	case ATH9K_ANI_FIRSTEP_LEVEL:{
+		const int firstep[] = { 0, 4, 8 };
+		u32 level = param;
+
+		if (level >= ARRAY_SIZE(firstep)) {
+			DPRINTF(ah->ah_sc, ATH_DBG_ANI,
+				 "%s: level out of range (%u > %u)\n",
+				 __func__, level,
+				(unsigned) ARRAY_SIZE(firstep));
+			return false;
+		}
+		REG_RMW_FIELD(ah, AR_PHY_FIND_SIG,
+			      AR_PHY_FIND_SIG_FIRSTEP,
+			      firstep[level]);
+		if (level > aniState->firstepLevel)
+			ahp->ah_stats.ast_ani_stepup++;
+		else if (level < aniState->firstepLevel)
+			ahp->ah_stats.ast_ani_stepdown++;
+		aniState->firstepLevel = level;
+		break;
+	}
+	case ATH9K_ANI_SPUR_IMMUNITY_LEVEL:{
+		const int cycpwrThr1[] =
+			{ 2, 4, 6, 8, 10, 12, 14, 16 };
+		u32 level = param;
+
+		if (level >= ARRAY_SIZE(cycpwrThr1)) {
+			DPRINTF(ah->ah_sc, ATH_DBG_ANI,
+				 "%s: level out of range (%u > %u)\n",
+				 __func__, level,
+				 (unsigned)
+				ARRAY_SIZE(cycpwrThr1));
+			return false;
+		}
+		REG_RMW_FIELD(ah, AR_PHY_TIMING5,
+			      AR_PHY_TIMING5_CYCPWR_THR1,
+			      cycpwrThr1[level]);
+		if (level > aniState->spurImmunityLevel)
+			ahp->ah_stats.ast_ani_spurup++;
+		else if (level < aniState->spurImmunityLevel)
+			ahp->ah_stats.ast_ani_spurdown++;
+		aniState->spurImmunityLevel = level;
+		break;
+	}
+	case ATH9K_ANI_PRESENT:
+		break;
+	default:
+		DPRINTF(ah->ah_sc, ATH_DBG_ANI,
+			"%s: invalid cmd %u\n", __func__, cmd);
+		return false;
+	}
+
+	DPRINTF(ah->ah_sc, ATH_DBG_ANI, "%s: ANI parameters:\n", __func__);
+	DPRINTF(ah->ah_sc, ATH_DBG_ANI,
+		"noiseImmunityLevel=%d, spurImmunityLevel=%d, "
+		"ofdmWeakSigDetectOff=%d\n",
+		 aniState->noiseImmunityLevel, aniState->spurImmunityLevel,
+		 !aniState->ofdmWeakSigDetectOff);
+	DPRINTF(ah->ah_sc, ATH_DBG_ANI,
+		"cckWeakSigThreshold=%d, "
+		"firstepLevel=%d, listenTime=%d\n",
+		 aniState->cckWeakSigThreshold, aniState->firstepLevel,
+		 aniState->listenTime);
+	DPRINTF(ah->ah_sc, ATH_DBG_ANI,
+		 "cycleCount=%d, ofdmPhyErrCount=%d, cckPhyErrCount=%d\n\n",
+		 aniState->cycleCount, aniState->ofdmPhyErrCount,
+		 aniState->cckPhyErrCount);
+	return true;
+}
+
+static void ath9k_ani_restart(struct ath_hal *ah)
+{
+	struct ath_hal_5416 *ahp = AH5416(ah);
+	struct ar5416AniState *aniState;
+
+	if (!DO_ANI(ah))
+		return;
+
+	aniState = ahp->ah_curani;
+
+	aniState->listenTime = 0;
+	if (ahp->ah_hasHwPhyCounters) {
+		if (aniState->ofdmTrigHigh > AR_PHY_COUNTMAX) {
+			aniState->ofdmPhyErrBase = 0;
+			DPRINTF(ah->ah_sc, ATH_DBG_ANI,
+				 "OFDM Trigger is too high for hw counters\n");
+		} else {
+			aniState->ofdmPhyErrBase =
+				AR_PHY_COUNTMAX - aniState->ofdmTrigHigh;
+		}
+		if (aniState->cckTrigHigh > AR_PHY_COUNTMAX) {
+			aniState->cckPhyErrBase = 0;
+			DPRINTF(ah->ah_sc, ATH_DBG_ANI,
+				 "CCK Trigger is too high for hw counters\n");
+		} else {
+			aniState->cckPhyErrBase =
+				AR_PHY_COUNTMAX - aniState->cckTrigHigh;
+		}
+		DPRINTF(ah->ah_sc, ATH_DBG_ANI,
+			 "%s: Writing ofdmbase=%u   cckbase=%u\n",
+			 __func__, aniState->ofdmPhyErrBase,
+			 aniState->cckPhyErrBase);
+		REG_WRITE(ah, AR_PHY_ERR_1, aniState->ofdmPhyErrBase);
+		REG_WRITE(ah, AR_PHY_ERR_2, aniState->cckPhyErrBase);
+		REG_WRITE(ah, AR_PHY_ERR_MASK_1, AR_PHY_ERR_OFDM_TIMING);
+		REG_WRITE(ah, AR_PHY_ERR_MASK_2, AR_PHY_ERR_CCK_TIMING);
+
+		ath9k_hw_update_mibstats(ah, &ahp->ah_mibStats);
+	}
+	aniState->ofdmPhyErrCount = 0;
+	aniState->cckPhyErrCount = 0;
+}
+
+static void ath9k_hw_ani_ofdm_err_trigger(struct ath_hal *ah)
+{
+	struct ath_hal_5416 *ahp = AH5416(ah);
+	struct ath9k_channel *chan = ah->ah_curchan;
+	struct ar5416AniState *aniState;
+	enum wireless_mode mode;
+	int32_t rssi;
+
+	if (!DO_ANI(ah))
+		return;
+
+	aniState = ahp->ah_curani;
+
+	if (aniState->noiseImmunityLevel < HAL_NOISE_IMMUNE_MAX) {
+		if (ath9k_hw_ani_control(ah, ATH9K_ANI_NOISE_IMMUNITY_LEVEL,
+					 aniState->noiseImmunityLevel + 1)) {
+			return;
+		}
+	}
+
+	if (aniState->spurImmunityLevel < HAL_SPUR_IMMUNE_MAX) {
+		if (ath9k_hw_ani_control(ah, ATH9K_ANI_SPUR_IMMUNITY_LEVEL,
+					 aniState->spurImmunityLevel + 1)) {
+			return;
+		}
+	}
+
+	if (ah->ah_opmode == ATH9K_M_HOSTAP) {
+		if (aniState->firstepLevel < HAL_FIRST_STEP_MAX) {
+			ath9k_hw_ani_control(ah, ATH9K_ANI_FIRSTEP_LEVEL,
+					     aniState->firstepLevel + 1);
+		}
+		return;
+	}
+	rssi = BEACON_RSSI(ahp);
+	if (rssi > aniState->rssiThrHigh) {
+		if (!aniState->ofdmWeakSigDetectOff) {
+			if (ath9k_hw_ani_control(ah,
+					 ATH9K_ANI_OFDM_WEAK_SIGNAL_DETECTION,
+					 false)) {
+				ath9k_hw_ani_control(ah,
+					ATH9K_ANI_SPUR_IMMUNITY_LEVEL,
+					0);
+				return;
+			}
+		}
+		if (aniState->firstepLevel < HAL_FIRST_STEP_MAX) {
+			ath9k_hw_ani_control(ah, ATH9K_ANI_FIRSTEP_LEVEL,
+					     aniState->firstepLevel + 1);
+			return;
+		}
+	} else if (rssi > aniState->rssiThrLow) {
+		if (aniState->ofdmWeakSigDetectOff)
+			ath9k_hw_ani_control(ah,
+				     ATH9K_ANI_OFDM_WEAK_SIGNAL_DETECTION,
+				     true);
+		if (aniState->firstepLevel < HAL_FIRST_STEP_MAX)
+			ath9k_hw_ani_control(ah, ATH9K_ANI_FIRSTEP_LEVEL,
+					     aniState->firstepLevel + 1);
+		return;
+	} else {
+		mode = ath9k_hw_chan2wmode(ah, chan);
+		if (mode == ATH9K_MODE_11G || mode == ATH9K_MODE_11B) {
+			if (!aniState->ofdmWeakSigDetectOff)
+				ath9k_hw_ani_control(ah,
+				     ATH9K_ANI_OFDM_WEAK_SIGNAL_DETECTION,
+				     false);
+			if (aniState->firstepLevel > 0)
+				ath9k_hw_ani_control(ah,
+						     ATH9K_ANI_FIRSTEP_LEVEL,
+						     0);
+			return;
+		}
+	}
+}
+
+static void ath9k_hw_ani_cck_err_trigger(struct ath_hal *ah)
+{
+	struct ath_hal_5416 *ahp = AH5416(ah);
+	struct ath9k_channel *chan = ah->ah_curchan;
+	struct ar5416AniState *aniState;
+	enum wireless_mode mode;
+	int32_t rssi;
+
+	if (!DO_ANI(ah))
+		return;
+
+	aniState = ahp->ah_curani;
+	if (aniState->noiseImmunityLevel < HAL_NOISE_IMMUNE_MAX) {
+		if (ath9k_hw_ani_control(ah, ATH9K_ANI_NOISE_IMMUNITY_LEVEL,
+					 aniState->noiseImmunityLevel + 1)) {
+			return;
+		}
+	}
+	if (ah->ah_opmode == ATH9K_M_HOSTAP) {
+		if (aniState->firstepLevel < HAL_FIRST_STEP_MAX) {
+			ath9k_hw_ani_control(ah, ATH9K_ANI_FIRSTEP_LEVEL,
+					     aniState->firstepLevel + 1);
+		}
+		return;
+	}
+	rssi = BEACON_RSSI(ahp);
+	if (rssi > aniState->rssiThrLow) {
+		if (aniState->firstepLevel < HAL_FIRST_STEP_MAX)
+			ath9k_hw_ani_control(ah, ATH9K_ANI_FIRSTEP_LEVEL,
+					     aniState->firstepLevel + 1);
+	} else {
+		mode = ath9k_hw_chan2wmode(ah, chan);
+		if (mode == ATH9K_MODE_11G || mode == ATH9K_MODE_11B) {
+			if (aniState->firstepLevel > 0)
+				ath9k_hw_ani_control(ah,
+						     ATH9K_ANI_FIRSTEP_LEVEL,
+						     0);
+		}
+	}
+}
+
+static void ath9k_ani_reset(struct ath_hal *ah)
+{
+	struct ath_hal_5416 *ahp = AH5416(ah);
+	struct ar5416AniState *aniState;
+	struct ath9k_channel *chan = ah->ah_curchan;
+	int index;
+
+	if (!DO_ANI(ah))
+		return;
+
+	index = ath9k_hw_get_ani_channel_idx(ah, chan);
+	aniState = &ahp->ah_ani[index];
+	ahp->ah_curani = aniState;
+
+	if (DO_ANI(ah) && ah->ah_opmode != ATH9K_M_STA
+	    && ah->ah_opmode != ATH9K_M_IBSS) {
+		DPRINTF(ah->ah_sc, ATH_DBG_ANI,
+			 "%s: Reset ANI state opmode %u\n", __func__,
+			 ah->ah_opmode);
+		ahp->ah_stats.ast_ani_reset++;
+		ath9k_hw_ani_control(ah, ATH9K_ANI_NOISE_IMMUNITY_LEVEL, 0);
+		ath9k_hw_ani_control(ah, ATH9K_ANI_SPUR_IMMUNITY_LEVEL, 0);
+		ath9k_hw_ani_control(ah, ATH9K_ANI_FIRSTEP_LEVEL, 0);
+		ath9k_hw_ani_control(ah,
+				     ATH9K_ANI_OFDM_WEAK_SIGNAL_DETECTION,
+				     !ATH9K_ANI_USE_OFDM_WEAK_SIG);
+		ath9k_hw_ani_control(ah, ATH9K_ANI_CCK_WEAK_SIGNAL_THR,
+				     ATH9K_ANI_CCK_WEAK_SIG_THR);
+		ath9k_hw_setrxfilter(ah,
+				     ath9k_hw_getrxfilter(ah) |
+				     ATH9K_RX_FILTER_PHYERR);
+		if (ah->ah_opmode == ATH9K_M_HOSTAP) {
+			ahp->ah_curani->ofdmTrigHigh =
+				ah->ah_config.ofdm_trig_high;
+			ahp->ah_curani->ofdmTrigLow =
+				ah->ah_config.ofdm_trig_low;
+			ahp->ah_curani->cckTrigHigh =
+				ah->ah_config.cck_trig_high;
+			ahp->ah_curani->cckTrigLow =
+				ah->ah_config.cck_trig_low;
+		}
+		ath9k_ani_restart(ah);
+		return;
+	}
+
+	if (aniState->noiseImmunityLevel != 0)
+		ath9k_hw_ani_control(ah, ATH9K_ANI_NOISE_IMMUNITY_LEVEL,
+				     aniState->noiseImmunityLevel);
+	if (aniState->spurImmunityLevel != 0)
+		ath9k_hw_ani_control(ah, ATH9K_ANI_SPUR_IMMUNITY_LEVEL,
+				     aniState->spurImmunityLevel);
+	if (aniState->ofdmWeakSigDetectOff)
+		ath9k_hw_ani_control(ah,
+				     ATH9K_ANI_OFDM_WEAK_SIGNAL_DETECTION,
+				     !aniState->ofdmWeakSigDetectOff);
+	if (aniState->cckWeakSigThreshold)
+		ath9k_hw_ani_control(ah, ATH9K_ANI_CCK_WEAK_SIGNAL_THR,
+				     aniState->cckWeakSigThreshold);
+	if (aniState->firstepLevel != 0)
+		ath9k_hw_ani_control(ah, ATH9K_ANI_FIRSTEP_LEVEL,
+				     aniState->firstepLevel);
+	if (ahp->ah_hasHwPhyCounters) {
+		ath9k_hw_setrxfilter(ah,
+				     ath9k_hw_getrxfilter(ah) &
+				     ~ATH9K_RX_FILTER_PHYERR);
+		ath9k_ani_restart(ah);
+		REG_WRITE(ah, AR_PHY_ERR_MASK_1, AR_PHY_ERR_OFDM_TIMING);
+		REG_WRITE(ah, AR_PHY_ERR_MASK_2, AR_PHY_ERR_CCK_TIMING);
+
+	} else {
+		ath9k_ani_restart(ah);
+		ath9k_hw_setrxfilter(ah,
+				     ath9k_hw_getrxfilter(ah) |
+				     ATH9K_RX_FILTER_PHYERR);
+	}
+}
+
+void ath9k_hw_procmibevent(struct ath_hal *ah,
+			   const struct ath9k_node_stats *stats)
+{
+	struct ath_hal_5416 *ahp = AH5416(ah);
+	u32 phyCnt1, phyCnt2;
+
+	DPRINTF(ah->ah_sc, ATH_DBG_ANI, "Processing Mib Intr\n");
+
+	REG_WRITE(ah, AR_FILT_OFDM, 0);
+	REG_WRITE(ah, AR_FILT_CCK, 0);
+	if (!(REG_READ(ah, AR_SLP_MIB_CTRL) & AR_SLP_MIB_PENDING))
+		REG_WRITE(ah, AR_SLP_MIB_CTRL, AR_SLP_MIB_CLEAR);
+
+	ath9k_hw_update_mibstats(ah, &ahp->ah_mibStats);
+	ahp->ah_stats.ast_nodestats = *stats;
+
+	if (!DO_ANI(ah))
+		return;
+
+	phyCnt1 = REG_READ(ah, AR_PHY_ERR_1);
+	phyCnt2 = REG_READ(ah, AR_PHY_ERR_2);
+	if (((phyCnt1 & AR_MIBCNT_INTRMASK) == AR_MIBCNT_INTRMASK) ||
+	    ((phyCnt2 & AR_MIBCNT_INTRMASK) == AR_MIBCNT_INTRMASK)) {
+		struct ar5416AniState *aniState = ahp->ah_curani;
+		u32 ofdmPhyErrCnt, cckPhyErrCnt;
+
+		ofdmPhyErrCnt = phyCnt1 - aniState->ofdmPhyErrBase;
+		ahp->ah_stats.ast_ani_ofdmerrs +=
+			ofdmPhyErrCnt - aniState->ofdmPhyErrCount;
+		aniState->ofdmPhyErrCount = ofdmPhyErrCnt;
+
+		cckPhyErrCnt = phyCnt2 - aniState->cckPhyErrBase;
+		ahp->ah_stats.ast_ani_cckerrs +=
+			cckPhyErrCnt - aniState->cckPhyErrCount;
+		aniState->cckPhyErrCount = cckPhyErrCnt;
+
+		if (aniState->ofdmPhyErrCount > aniState->ofdmTrigHigh)
+			ath9k_hw_ani_ofdm_err_trigger(ah);
+		if (aniState->cckPhyErrCount > aniState->cckTrigHigh)
+			ath9k_hw_ani_cck_err_trigger(ah);
+
+		ath9k_ani_restart(ah);
+	}
+}
+
+static void ath9k_hw_ani_lower_immunity(struct ath_hal *ah)
+{
+	struct ath_hal_5416 *ahp = AH5416(ah);
+	struct ar5416AniState *aniState;
+	int32_t rssi;
+
+	aniState = ahp->ah_curani;
+
+	if (ah->ah_opmode == ATH9K_M_HOSTAP) {
+		if (aniState->firstepLevel > 0) {
+			if (ath9k_hw_ani_control(ah, ATH9K_ANI_FIRSTEP_LEVEL,
+						 aniState->firstepLevel - 1)) {
+				return;
+			}
+		}
+	} else {
+		rssi = BEACON_RSSI(ahp);
+		if (rssi > aniState->rssiThrHigh) {
+			/* XXX: Handle me */
+		} else if (rssi > aniState->rssiThrLow) {
+			if (aniState->ofdmWeakSigDetectOff) {
+				if (ath9k_hw_ani_control(ah,
+					 ATH9K_ANI_OFDM_WEAK_SIGNAL_DETECTION,
+					 true) ==
+				    true) {
+					return;
+				}
+			}
+			if (aniState->firstepLevel > 0) {
+				if (ath9k_hw_ani_control
+				    (ah, ATH9K_ANI_FIRSTEP_LEVEL,
+				     aniState->firstepLevel - 1) ==
+				    true) {
+					return;
+				}
+			}
+		} else {
+			if (aniState->firstepLevel > 0) {
+				if (ath9k_hw_ani_control
+				    (ah, ATH9K_ANI_FIRSTEP_LEVEL,
+				     aniState->firstepLevel - 1) ==
+				    true) {
+					return;
+				}
+			}
+		}
+	}
+
+	if (aniState->spurImmunityLevel > 0) {
+		if (ath9k_hw_ani_control(ah, ATH9K_ANI_SPUR_IMMUNITY_LEVEL,
+					 aniState->spurImmunityLevel - 1)) {
+			return;
+		}
+	}
+
+	if (aniState->noiseImmunityLevel > 0) {
+		ath9k_hw_ani_control(ah, ATH9K_ANI_NOISE_IMMUNITY_LEVEL,
+				     aniState->noiseImmunityLevel - 1);
+		return;
+	}
+}
+
+static int32_t ath9k_hw_ani_get_listen_time(struct ath_hal *ah)
+{
+	struct ath_hal_5416 *ahp = AH5416(ah);
+	struct ar5416AniState *aniState;
+	u32 txFrameCount, rxFrameCount, cycleCount;
+	int32_t listenTime;
+
+	txFrameCount = REG_READ(ah, AR_TFCNT);
+	rxFrameCount = REG_READ(ah, AR_RFCNT);
+	cycleCount = REG_READ(ah, AR_CCCNT);
+
+	aniState = ahp->ah_curani;
+	if (aniState->cycleCount == 0 || aniState->cycleCount > cycleCount) {
+
+		listenTime = 0;
+		ahp->ah_stats.ast_ani_lzero++;
+	} else {
+		int32_t ccdelta = cycleCount - aniState->cycleCount;
+		int32_t rfdelta = rxFrameCount - aniState->rxFrameCount;
+		int32_t tfdelta = txFrameCount - aniState->txFrameCount;
+		listenTime = (ccdelta - rfdelta - tfdelta) / 44000;
+	}
+	aniState->cycleCount = cycleCount;
+	aniState->txFrameCount = txFrameCount;
+	aniState->rxFrameCount = rxFrameCount;
+
+	return listenTime;
+}
+
+void ath9k_hw_ani_monitor(struct ath_hal *ah,
+			  const struct ath9k_node_stats *stats,
+			  struct ath9k_channel *chan)
+{
+	struct ath_hal_5416 *ahp = AH5416(ah);
+	struct ar5416AniState *aniState;
+	int32_t listenTime;
+
+	aniState = ahp->ah_curani;
+	ahp->ah_stats.ast_nodestats = *stats;
+
+	listenTime = ath9k_hw_ani_get_listen_time(ah);
+	if (listenTime < 0) {
+		ahp->ah_stats.ast_ani_lneg++;
+		ath9k_ani_restart(ah);
+		return;
+	}
+
+	aniState->listenTime += listenTime;
+
+	if (ahp->ah_hasHwPhyCounters) {
+		u32 phyCnt1, phyCnt2;
+		u32 ofdmPhyErrCnt, cckPhyErrCnt;
+
+		ath9k_hw_update_mibstats(ah, &ahp->ah_mibStats);
+
+		phyCnt1 = REG_READ(ah, AR_PHY_ERR_1);
+		phyCnt2 = REG_READ(ah, AR_PHY_ERR_2);
+
+		if (phyCnt1 < aniState->ofdmPhyErrBase ||
+		    phyCnt2 < aniState->cckPhyErrBase) {
+			if (phyCnt1 < aniState->ofdmPhyErrBase) {
+				DPRINTF(ah->ah_sc, ATH_DBG_ANI,
+					 "%s: phyCnt1 0x%x, resetting "
+					 "counter value to 0x%x\n",
+					 __func__, phyCnt1,
+					 aniState->ofdmPhyErrBase);
+				REG_WRITE(ah, AR_PHY_ERR_1,
+					  aniState->ofdmPhyErrBase);
+				REG_WRITE(ah, AR_PHY_ERR_MASK_1,
+					  AR_PHY_ERR_OFDM_TIMING);
+			}
+			if (phyCnt2 < aniState->cckPhyErrBase) {
+				DPRINTF(ah->ah_sc, ATH_DBG_ANI,
+					 "%s: phyCnt2 0x%x, resetting "
+					 "counter value to 0x%x\n",
+					 __func__, phyCnt2,
+					 aniState->cckPhyErrBase);
+				REG_WRITE(ah, AR_PHY_ERR_2,
+					  aniState->cckPhyErrBase);
+				REG_WRITE(ah, AR_PHY_ERR_MASK_2,
+					  AR_PHY_ERR_CCK_TIMING);
+			}
+			return;
+		}
+
+		ofdmPhyErrCnt = phyCnt1 - aniState->ofdmPhyErrBase;
+		ahp->ah_stats.ast_ani_ofdmerrs +=
+			ofdmPhyErrCnt - aniState->ofdmPhyErrCount;
+		aniState->ofdmPhyErrCount = ofdmPhyErrCnt;
+
+		cckPhyErrCnt = phyCnt2 - aniState->cckPhyErrBase;
+		ahp->ah_stats.ast_ani_cckerrs +=
+			cckPhyErrCnt - aniState->cckPhyErrCount;
+		aniState->cckPhyErrCount = cckPhyErrCnt;
+	}
+
+	if (!DO_ANI(ah))
+		return;
+
+	if (aniState->listenTime > 5 * ahp->ah_aniPeriod) {
+		if (aniState->ofdmPhyErrCount <= aniState->listenTime *
+		    aniState->ofdmTrigLow / 1000 &&
+		    aniState->cckPhyErrCount <= aniState->listenTime *
+		    aniState->cckTrigLow / 1000)
+			ath9k_hw_ani_lower_immunity(ah);
+		ath9k_ani_restart(ah);
+	} else if (aniState->listenTime > ahp->ah_aniPeriod) {
+		if (aniState->ofdmPhyErrCount > aniState->listenTime *
+		    aniState->ofdmTrigHigh / 1000) {
+			ath9k_hw_ani_ofdm_err_trigger(ah);
+			ath9k_ani_restart(ah);
+		} else if (aniState->cckPhyErrCount >
+			   aniState->listenTime * aniState->cckTrigHigh /
+			   1000) {
+			ath9k_hw_ani_cck_err_trigger(ah);
+			ath9k_ani_restart(ah);
+		}
+	}
+}
+
+#ifndef ATH_NF_PER_CHAN
+static void ath9k_init_nfcal_hist_buffer(struct ath_hal *ah)
+{
+	int i, j;
+
+	for (i = 0; i < NUM_NF_READINGS; i++) {
+		ah->nfCalHist[i].currIndex = 0;
+		ah->nfCalHist[i].privNF = AR_PHY_CCA_MAX_GOOD_VALUE;
+		ah->nfCalHist[i].invalidNFcount =
+			AR_PHY_CCA_FILTERWINDOW_LENGTH;
+		for (j = 0; j < ATH9K_NF_CAL_HIST_MAX; j++) {
+			ah->nfCalHist[i].nfCalBuffer[j] =
+				AR_PHY_CCA_MAX_GOOD_VALUE;
+		}
+	}
+	return;
+}
+#endif
+
+static void ath9k_hw_gpio_cfg_output_mux(struct ath_hal *ah,
+					 u32 gpio, u32 type)
+{
+	int addr;
+	u32 gpio_shift, tmp;
+
+	if (gpio > 11)
+		addr = AR_GPIO_OUTPUT_MUX3;
+	else if (gpio > 5)
+		addr = AR_GPIO_OUTPUT_MUX2;
+	else
+		addr = AR_GPIO_OUTPUT_MUX1;
+
+	gpio_shift = (gpio % 6) * 5;
+
+	if (AR_SREV_9280_20_OR_LATER(ah)
+	    || (addr != AR_GPIO_OUTPUT_MUX1)) {
+		REG_RMW(ah, addr, (type << gpio_shift),
+			(0x1f << gpio_shift));
+	} else {
+		tmp = REG_READ(ah, addr);
+		tmp = ((tmp & 0x1F0) << 1) | (tmp & ~0x1F0);
+		tmp &= ~(0x1f << gpio_shift);
+		tmp |= (type << gpio_shift);
+		REG_WRITE(ah, addr, tmp);
+	}
+}
+
+static bool ath9k_hw_cfg_output(struct ath_hal *ah, u32 gpio,
+				enum ath9k_gpio_output_mux_type
+				halSignalType)
+{
+	u32 ah_signal_type;
+	u32 gpio_shift;
+
+	static u32 MuxSignalConversionTable[] = {
+
+		AR_GPIO_OUTPUT_MUX_AS_OUTPUT,
+
+		AR_GPIO_OUTPUT_MUX_AS_PCIE_ATTENTION_LED,
+
+		AR_GPIO_OUTPUT_MUX_AS_PCIE_POWER_LED,
+
+		AR_GPIO_OUTPUT_MUX_AS_MAC_NETWORK_LED,
+
+		AR_GPIO_OUTPUT_MUX_AS_MAC_POWER_LED,
+	};
+
+	if ((halSignalType >= 0)
+	    && (halSignalType < ARRAY_SIZE(MuxSignalConversionTable)))
+		ah_signal_type = MuxSignalConversionTable[halSignalType];
+	else
+		return false;
+
+	ath9k_hw_gpio_cfg_output_mux(ah, gpio, ah_signal_type);
+
+	gpio_shift = 2 * gpio;
+
+	REG_RMW(ah,
+		AR_GPIO_OE_OUT,
+		(AR_GPIO_OE_OUT_DRV_ALL << gpio_shift),
+		(AR_GPIO_OE_OUT_DRV << gpio_shift));
+
+	return true;
+}
+
+static bool ath9k_hw_set_gpio(struct ath_hal *ah, u32 gpio,
+			      u32 val)
+{
+	REG_RMW(ah, AR_GPIO_IN_OUT, ((val & 1) << gpio),
+		AR_GPIO_BIT(gpio));
+	return true;
+}
+
+static u32 ath9k_hw_gpio_get(struct ath_hal *ah, u32 gpio)
+{
+	if (gpio >= ah->ah_caps.num_gpio_pins)
+		return 0xffffffff;
+
+	if (AR_SREV_9280_10_OR_LATER(ah)) {
+		return (MS
+			(REG_READ(ah, AR_GPIO_IN_OUT),
+			 AR928X_GPIO_IN_VAL) & AR_GPIO_BIT(gpio)) != 0;
+	} else {
+		return (MS(REG_READ(ah, AR_GPIO_IN_OUT), AR_GPIO_IN_VAL) &
+			AR_GPIO_BIT(gpio)) != 0;
+	}
+}
+
+static inline int ath9k_hw_post_attach(struct ath_hal *ah)
+{
+	int ecode;
+
+	if (!ath9k_hw_chip_test(ah)) {
+		DPRINTF(ah->ah_sc, ATH_DBG_REG_IO,
+			 "%s: hardware self-test failed\n", __func__);
+		return -ENODEV;
+	}
+
+	ecode = ath9k_hw_rf_claim(ah);
+	if (ecode != 0)
+		return ecode;
+
+	ecode = ath9k_hw_eeprom_attach(ah);
+	if (ecode != 0)
+		return ecode;
+	ecode = ath9k_hw_rfattach(ah);
+	if (ecode != 0)
+		return ecode;
+
+	if (!AR_SREV_9100(ah)) {
+		ath9k_hw_ani_setup(ah);
+		ath9k_hw_ani_attach(ah);
+	}
+	return 0;
+}
+
+static u32 ath9k_hw_ini_fixup(struct ath_hal *ah,
+				    struct ar5416_eeprom *pEepData,
+				    u32 reg, u32 value)
+{
+	struct base_eep_header *pBase = &(pEepData->baseEepHeader);
+
+	switch (ah->ah_devid) {
+	case AR9280_DEVID_PCI:
+		if (reg == 0x7894) {
+			DPRINTF(ah->ah_sc, ATH_DBG_ANY,
+				 "ini VAL: %x  EEPROM: %x\n", value,
+				 (pBase->version & 0xff));
+
+			if ((pBase->version & 0xff) > 0x0a) {
+				DPRINTF(ah->ah_sc, ATH_DBG_ANY,
+					 "PWDCLKIND: %d\n",
+					 pBase->pwdclkind);
+				value &= ~AR_AN_TOP2_PWDCLKIND;
+				value |= AR_AN_TOP2_PWDCLKIND & (pBase->
+					 pwdclkind << AR_AN_TOP2_PWDCLKIND_S);
+			} else {
+				DPRINTF(ah->ah_sc, ATH_DBG_ANY,
+					 "PWDCLKIND Earlier Rev\n");
+			}
+
+			DPRINTF(ah->ah_sc, ATH_DBG_ANY,
+				 "final ini VAL: %x\n", value);
+		}
+		break;
+	}
+	return value;
+}
+
+static bool ath9k_hw_fill_cap_info(struct ath_hal *ah)
+{
+	struct ath_hal_5416 *ahp = AH5416(ah);
+	struct ath9k_hw_capabilities *pCap = &ah->ah_caps;
+	u16 capField = 0, eeval;
+
+	eeval = ath9k_hw_get_eeprom(ahp, EEP_REG_0);
+
+	ah->ah_currentRD = eeval;
+
+	eeval = ath9k_hw_get_eeprom(ahp, EEP_REG_1);
+	ah->ah_currentRDExt = eeval;
+
+	capField = ath9k_hw_get_eeprom(ahp, EEP_OP_CAP);
+
+	if (ah->ah_opmode != ATH9K_M_HOSTAP &&
+	    ah->ah_subvendorid == AR_SUBVENDOR_ID_NEW_A) {
+		if (ah->ah_currentRD == 0x64 || ah->ah_currentRD == 0x65)
+			ah->ah_currentRD += 5;
+		else if (ah->ah_currentRD == 0x41)
+			ah->ah_currentRD = 0x43;
+		DPRINTF(ah->ah_sc, ATH_DBG_REGULATORY,
+			 "%s: regdomain mapped to 0x%x\n", __func__,
+			 ah->ah_currentRD);
+	}
+
+	eeval = ath9k_hw_get_eeprom(ahp, EEP_OP_MODE);
+	bitmap_zero(pCap->wireless_modes, ATH9K_MODE_MAX);
+
+	if (eeval & AR5416_OPFLAGS_11A) {
+		set_bit(ATH9K_MODE_11A, pCap->wireless_modes);
+		if (ah->ah_config.ht_enable) {
+			if (!(eeval & AR5416_OPFLAGS_N_5G_HT20))
+				set_bit(ATH9K_MODE_11NA_HT20,
+					pCap->wireless_modes);
+			if (!(eeval & AR5416_OPFLAGS_N_5G_HT40)) {
+				set_bit(ATH9K_MODE_11NA_HT40PLUS,
+					pCap->wireless_modes);
+				set_bit(ATH9K_MODE_11NA_HT40MINUS,
+					pCap->wireless_modes);
+			}
+		}
+	}
+
+	if (eeval & AR5416_OPFLAGS_11G) {
+		set_bit(ATH9K_MODE_11B, pCap->wireless_modes);
+		set_bit(ATH9K_MODE_11G, pCap->wireless_modes);
+		if (ah->ah_config.ht_enable) {
+			if (!(eeval & AR5416_OPFLAGS_N_2G_HT20))
+				set_bit(ATH9K_MODE_11NG_HT20,
+					pCap->wireless_modes);
+			if (!(eeval & AR5416_OPFLAGS_N_2G_HT40)) {
+				set_bit(ATH9K_MODE_11NG_HT40PLUS,
+					pCap->wireless_modes);
+				set_bit(ATH9K_MODE_11NG_HT40MINUS,
+					pCap->wireless_modes);
+			}
+		}
+	}
+
+	pCap->tx_chainmask = ath9k_hw_get_eeprom(ahp, EEP_TX_MASK);
+	if ((ah->ah_isPciExpress)
+	    || (eeval & AR5416_OPFLAGS_11A)) {
+		pCap->rx_chainmask =
+			ath9k_hw_get_eeprom(ahp, EEP_RX_MASK);
+	} else {
+		pCap->rx_chainmask =
+			(ath9k_hw_gpio_get(ah, 0)) ? 0x5 : 0x7;
+	}
+
+	if (!(AR_SREV_9280(ah) && (ah->ah_macRev == 0)))
+		ahp->ah_miscMode |= AR_PCU_MIC_NEW_LOC_ENA;
+
+	pCap->low_2ghz_chan = 2312;
+	pCap->high_2ghz_chan = 2732;
+
+	pCap->low_5ghz_chan = 4920;
+	pCap->high_5ghz_chan = 6100;
+
+	pCap->hw_caps &= ~ATH9K_HW_CAP_CIPHER_CKIP;
+	pCap->hw_caps |= ATH9K_HW_CAP_CIPHER_TKIP;
+	pCap->hw_caps |= ATH9K_HW_CAP_CIPHER_AESCCM;
+
+	pCap->hw_caps &= ~ATH9K_HW_CAP_MIC_CKIP;
+	pCap->hw_caps |= ATH9K_HW_CAP_MIC_TKIP;
+	pCap->hw_caps |= ATH9K_HW_CAP_MIC_AESCCM;
+
+	pCap->hw_caps |= ATH9K_HW_CAP_CHAN_SPREAD;
+
+	if (ah->ah_config.ht_enable)
+		pCap->hw_caps |= ATH9K_HW_CAP_HT;
+	else
+		pCap->hw_caps &= ~ATH9K_HW_CAP_HT;
+
+	pCap->hw_caps |= ATH9K_HW_CAP_GTT;
+	pCap->hw_caps |= ATH9K_HW_CAP_VEOL;
+	pCap->hw_caps |= ATH9K_HW_CAP_BSSIDMASK;
+	pCap->hw_caps &= ~ATH9K_HW_CAP_MCAST_KEYSEARCH;
+
+	if (capField & AR_EEPROM_EEPCAP_MAXQCU)
+		pCap->total_queues =
+			MS(capField, AR_EEPROM_EEPCAP_MAXQCU);
+	else
+		pCap->total_queues = ATH9K_NUM_TX_QUEUES;
+
+	if (capField & AR_EEPROM_EEPCAP_KC_ENTRIES)
+		pCap->keycache_size =
+			1 << MS(capField, AR_EEPROM_EEPCAP_KC_ENTRIES);
+	else
+		pCap->keycache_size = AR_KEYTABLE_SIZE;
+
+	pCap->hw_caps |= ATH9K_HW_CAP_FASTCC;
+	pCap->num_mr_retries = 4;
+	pCap->tx_triglevel_max = MAX_TX_FIFO_THRESHOLD;
+
+	if (AR_SREV_9280_10_OR_LATER(ah))
+		pCap->num_gpio_pins = AR928X_NUM_GPIO;
+	else
+		pCap->num_gpio_pins = AR_NUM_GPIO;
+
+	if (AR_SREV_9280_10_OR_LATER(ah)) {
+		pCap->hw_caps |= ATH9K_HW_CAP_WOW;
+		pCap->hw_caps |= ATH9K_HW_CAP_WOW_MATCHPATTERN_EXACT;
+	} else {
+		pCap->hw_caps &= ~ATH9K_HW_CAP_WOW;
+		pCap->hw_caps &= ~ATH9K_HW_CAP_WOW_MATCHPATTERN_EXACT;
+	}
+
+	if (AR_SREV_9160_10_OR_LATER(ah) || AR_SREV_9100(ah)) {
+		pCap->hw_caps |= ATH9K_HW_CAP_CST;
+		pCap->rts_aggr_limit = ATH_AMPDU_LIMIT_MAX;
+	} else {
+		pCap->rts_aggr_limit = (8 * 1024);
+	}
+
+	pCap->hw_caps |= ATH9K_HW_CAP_ENHANCEDPM;
+
+	ah->ah_rfsilent = ath9k_hw_get_eeprom(ahp, EEP_RF_SILENT);
+	if (ah->ah_rfsilent & EEP_RFSILENT_ENABLED) {
+		ahp->ah_gpioSelect =
+			MS(ah->ah_rfsilent, EEP_RFSILENT_GPIO_SEL);
+		ahp->ah_polarity =
+			MS(ah->ah_rfsilent, EEP_RFSILENT_POLARITY);
+
+		ath9k_hw_setcapability(ah, ATH9K_CAP_RFSILENT, 1, true,
+				       NULL);
+		pCap->hw_caps |= ATH9K_HW_CAP_RFSILENT;
+	}
+
+	if ((ah->ah_macVersion == AR_SREV_VERSION_5416_PCI) ||
+	    (ah->ah_macVersion == AR_SREV_VERSION_5416_PCIE) ||
+	    (ah->ah_macVersion == AR_SREV_VERSION_9160) ||
+	    (ah->ah_macVersion == AR_SREV_VERSION_9100) ||
+	    (ah->ah_macVersion == AR_SREV_VERSION_9280))
+		pCap->hw_caps &= ~ATH9K_HW_CAP_AUTOSLEEP;
+	else
+		pCap->hw_caps |= ATH9K_HW_CAP_AUTOSLEEP;
+
+	if (AR_SREV_9280(ah))
+		pCap->hw_caps &= ~ATH9K_HW_CAP_4KB_SPLITTRANS;
+	else
+		pCap->hw_caps |= ATH9K_HW_CAP_4KB_SPLITTRANS;
+
+	if (ah->ah_currentRDExt & (1 << REG_EXT_JAPAN_MIDBAND)) {
+		pCap->reg_cap =
+			AR_EEPROM_EEREGCAP_EN_KK_NEW_11A |
+			AR_EEPROM_EEREGCAP_EN_KK_U1_EVEN |
+			AR_EEPROM_EEREGCAP_EN_KK_U2 |
+			AR_EEPROM_EEREGCAP_EN_KK_MIDBAND;
+	} else {
+		pCap->reg_cap =
+			AR_EEPROM_EEREGCAP_EN_KK_NEW_11A |
+			AR_EEPROM_EEREGCAP_EN_KK_U1_EVEN;
+	}
+
+	pCap->reg_cap |= AR_EEPROM_EEREGCAP_EN_FCC_MIDBAND;
+
+	pCap->num_antcfg_5ghz =
+		ath9k_hw_get_num_ant_config(ahp, IEEE80211_BAND_5GHZ);
+	pCap->num_antcfg_2ghz =
+		ath9k_hw_get_num_ant_config(ahp, IEEE80211_BAND_2GHZ);
+
+	return true;
+}
+
+static void ar5416DisablePciePhy(struct ath_hal *ah)
+{
+	if (!AR_SREV_9100(ah))
+		return;
+
+	REG_WRITE(ah, AR_PCIE_SERDES, 0x9248fc00);
+	REG_WRITE(ah, AR_PCIE_SERDES, 0x24924924);
+	REG_WRITE(ah, AR_PCIE_SERDES, 0x28000029);
+	REG_WRITE(ah, AR_PCIE_SERDES, 0x57160824);
+	REG_WRITE(ah, AR_PCIE_SERDES, 0x25980579);
+	REG_WRITE(ah, AR_PCIE_SERDES, 0x00000000);
+	REG_WRITE(ah, AR_PCIE_SERDES, 0x1aaabe40);
+	REG_WRITE(ah, AR_PCIE_SERDES, 0xbe105554);
+	REG_WRITE(ah, AR_PCIE_SERDES, 0x000e1007);
+
+	REG_WRITE(ah, AR_PCIE_SERDES2, 0x00000000);
+}
+
+static void ath9k_set_power_sleep(struct ath_hal *ah, int setChip)
+{
+	REG_SET_BIT(ah, AR_STA_ID1, AR_STA_ID1_PWR_SAV);
+	if (setChip) {
+		REG_CLR_BIT(ah, AR_RTC_FORCE_WAKE,
+			    AR_RTC_FORCE_WAKE_EN);
+		if (!AR_SREV_9100(ah))
+			REG_WRITE(ah, AR_RC, AR_RC_AHB | AR_RC_HOSTIF);
+
+		REG_CLR_BIT(ah, (u16) (AR_RTC_RESET),
+			    AR_RTC_RESET_EN);
+	}
+}
+
+static void ath9k_set_power_network_sleep(struct ath_hal *ah, int setChip)
+{
+	REG_SET_BIT(ah, AR_STA_ID1, AR_STA_ID1_PWR_SAV);
+	if (setChip) {
+		struct ath9k_hw_capabilities *pCap = &ah->ah_caps;
+
+		if (!(pCap->hw_caps & ATH9K_HW_CAP_AUTOSLEEP)) {
+			REG_WRITE(ah, AR_RTC_FORCE_WAKE,
+				  AR_RTC_FORCE_WAKE_ON_INT);
+		} else {
+			REG_CLR_BIT(ah, AR_RTC_FORCE_WAKE,
+				    AR_RTC_FORCE_WAKE_EN);
+		}
+	}
+}
+
+static bool ath9k_hw_set_power_awake(struct ath_hal *ah,
+				     int setChip)
+{
+	u32 val;
+	int i;
+
+	if (setChip) {
+		if ((REG_READ(ah, AR_RTC_STATUS) & AR_RTC_STATUS_M) ==
+		    AR_RTC_STATUS_SHUTDOWN) {
+			if (ath9k_hw_set_reset_reg(ah, ATH9K_RESET_POWER_ON)
+			    != true) {
+				return false;
+			}
+		}
+		if (AR_SREV_9100(ah))
+			REG_SET_BIT(ah, AR_RTC_RESET,
+				       AR_RTC_RESET_EN);
+
+		REG_SET_BIT(ah, AR_RTC_FORCE_WAKE,
+			    AR_RTC_FORCE_WAKE_EN);
+		udelay(50);
+
+		for (i = POWER_UP_TIME / 50; i > 0; i--) {
+			val = REG_READ(ah, AR_RTC_STATUS) & AR_RTC_STATUS_M;
+			if (val == AR_RTC_STATUS_ON)
+				break;
+			udelay(50);
+			REG_SET_BIT(ah, AR_RTC_FORCE_WAKE,
+				       AR_RTC_FORCE_WAKE_EN);
+		}
+		if (i == 0) {
+			DPRINTF(ah->ah_sc, ATH_DBG_POWER_MGMT,
+				 "%s: Failed to wakeup in %uus\n",
+				 __func__, POWER_UP_TIME / 20);
+			return false;
+		}
+	}
+
+	REG_CLR_BIT(ah, AR_STA_ID1, AR_STA_ID1_PWR_SAV);
+	return true;
+}
+
+bool ath9k_hw_setpower(struct ath_hal *ah,
+		       enum ath9k_power_mode mode)
+{
+	struct ath_hal_5416 *ahp = AH5416(ah);
+	static const char *modes[] = {
+		"AWAKE",
+		"FULL-SLEEP",
+		"NETWORK SLEEP",
+		"UNDEFINED"
+	};
+	int status = true, setChip = true;
+
+	DPRINTF(ah->ah_sc, ATH_DBG_POWER_MGMT, "%s: %s -> %s (%s)\n", __func__,
+		 modes[ahp->ah_powerMode], modes[mode],
+		 setChip ? "set chip " : "");
+
+	switch (mode) {
+	case ATH9K_PM_AWAKE:
+		status = ath9k_hw_set_power_awake(ah, setChip);
+		break;
+	case ATH9K_PM_FULL_SLEEP:
+		ath9k_set_power_sleep(ah, setChip);
+		ahp->ah_chipFullSleep = true;
+		break;
+	case ATH9K_PM_NETWORK_SLEEP:
+		ath9k_set_power_network_sleep(ah, setChip);
+		break;
+	default:
+		DPRINTF(ah->ah_sc, ATH_DBG_POWER_MGMT,
+			 "%s: unknown power mode %u\n", __func__, mode);
+		return false;
+	}
+	ahp->ah_powerMode = mode;
+	return status;
+}
+
+static struct ath_hal *ath9k_hw_do_attach(u16 devid,
+					  struct ath_softc *sc,
+					  void __iomem *mem,
+					  int *status)
+{
+	struct ath_hal_5416 *ahp;
+	struct ath_hal *ah;
+	int ecode;
+#ifndef CONFIG_SLOW_ANT_DIV
+	u32 i;
+	u32 j;
+#endif
+
+	ahp = ath9k_hw_newstate(devid, sc, mem, status);
+	if (ahp == NULL)
+		return NULL;
+
+	ah = &ahp->ah;
+
+	ath9k_hw_set_defaults(ah);
+
+	if (ah->ah_config.intr_mitigation != 0)
+		ahp->ah_intrMitigation = true;
+
+	if (!ath9k_hw_set_reset_reg(ah, ATH9K_RESET_POWER_ON)) {
+		DPRINTF(ah->ah_sc, ATH_DBG_RESET, "%s: couldn't reset chip\n",
+			 __func__);
+		ecode = -EIO;
+		goto bad;
+	}
+
+	if (!ath9k_hw_setpower(ah, ATH9K_PM_AWAKE)) {
+		DPRINTF(ah->ah_sc, ATH_DBG_RESET, "%s: couldn't wakeup chip\n",
+			 __func__);
+		ecode = -EIO;
+		goto bad;
+	}
+
+	if (ah->ah_config.serialize_regmode == SER_REG_MODE_AUTO) {
+		if (ah->ah_macVersion == AR_SREV_VERSION_5416_PCI) {
+			ah->ah_config.serialize_regmode =
+				SER_REG_MODE_ON;
+		} else {
+			ah->ah_config.serialize_regmode =
+				SER_REG_MODE_OFF;
+		}
+	}
+	DPRINTF(ah->ah_sc, ATH_DBG_RESET,
+		"%s: serialize_regmode is %d\n",
+		__func__, ah->ah_config.serialize_regmode);
+
+	if ((ah->ah_macVersion != AR_SREV_VERSION_5416_PCI) &&
+	    (ah->ah_macVersion != AR_SREV_VERSION_5416_PCIE) &&
+	    (ah->ah_macVersion != AR_SREV_VERSION_9160) &&
+	    (!AR_SREV_9100(ah)) && (!AR_SREV_9280(ah))) {
+		DPRINTF(ah->ah_sc, ATH_DBG_RESET,
+			 "%s: Mac Chip Rev 0x%02x.%x is not supported by "
+			 "this driver\n", __func__,
+			 ah->ah_macVersion, ah->ah_macRev);
+		ecode = -EOPNOTSUPP;
+		goto bad;
+	}
+
+	if (AR_SREV_9100(ah)) {
+		ahp->ah_iqCalData.calData = &iq_cal_multi_sample;
+		ahp->ah_suppCals = IQ_MISMATCH_CAL;
+		ah->ah_isPciExpress = false;
+	}
+	ah->ah_phyRev = REG_READ(ah, AR_PHY_CHIP_ID);
+
+	if (AR_SREV_9160_10_OR_LATER(ah)) {
+		if (AR_SREV_9280_10_OR_LATER(ah)) {
+			ahp->ah_iqCalData.calData = &iq_cal_single_sample;
+			ahp->ah_adcGainCalData.calData =
+				&adc_gain_cal_single_sample;
+			ahp->ah_adcDcCalData.calData =
+				&adc_dc_cal_single_sample;
+			ahp->ah_adcDcCalInitData.calData =
+				&adc_init_dc_cal;
+		} else {
+			ahp->ah_iqCalData.calData = &iq_cal_multi_sample;
+			ahp->ah_adcGainCalData.calData =
+				&adc_gain_cal_multi_sample;
+			ahp->ah_adcDcCalData.calData =
+				&adc_dc_cal_multi_sample;
+			ahp->ah_adcDcCalInitData.calData =
+				&adc_init_dc_cal;
+		}
+		ahp->ah_suppCals =
+			ADC_GAIN_CAL | ADC_DC_CAL | IQ_MISMATCH_CAL;
+	}
+
+	if (AR_SREV_9160(ah)) {
+		ah->ah_config.enable_ani = 1;
+		ahp->ah_ani_function = (ATH9K_ANI_SPUR_IMMUNITY_LEVEL |
+					ATH9K_ANI_FIRSTEP_LEVEL);
+	} else {
+		ahp->ah_ani_function = ATH9K_ANI_ALL;
+		if (AR_SREV_9280_10_OR_LATER(ah)) {
+			ahp->ah_ani_function &=
+				~ATH9K_ANI_NOISE_IMMUNITY_LEVEL;
+		}
+	}
+
+	DPRINTF(ah->ah_sc, ATH_DBG_RESET,
+		 "%s: This Mac Chip Rev 0x%02x.%x is \n", __func__,
+		 ah->ah_macVersion, ah->ah_macRev);
+
+	if (AR_SREV_9280_20_OR_LATER(ah)) {
+		INIT_INI_ARRAY(&ahp->ah_iniModes, ar9280Modes_9280_2,
+			       ARRAY_SIZE(ar9280Modes_9280_2), 6);
+		INIT_INI_ARRAY(&ahp->ah_iniCommon, ar9280Common_9280_2,
+			       ARRAY_SIZE(ar9280Common_9280_2), 2);
+
+		if (ah->ah_config.pcie_clock_req) {
+			INIT_INI_ARRAY(&ahp->ah_iniPcieSerdes,
+				       ar9280PciePhy_clkreq_off_L1_9280,
+				       ARRAY_SIZE
+				       (ar9280PciePhy_clkreq_off_L1_9280),
+				       2);
+		} else {
+			INIT_INI_ARRAY(&ahp->ah_iniPcieSerdes,
+				       ar9280PciePhy_clkreq_always_on_L1_9280,
+				       ARRAY_SIZE
+				       (ar9280PciePhy_clkreq_always_on_L1_9280),
+				       2);
+		}
+		INIT_INI_ARRAY(&ahp->ah_iniModesAdditional,
+			       ar9280Modes_fast_clock_9280_2,
+			       ARRAY_SIZE(ar9280Modes_fast_clock_9280_2),
+			       3);
+	} else if (AR_SREV_9280_10_OR_LATER(ah)) {
+		INIT_INI_ARRAY(&ahp->ah_iniModes, ar9280Modes_9280,
+			       ARRAY_SIZE(ar9280Modes_9280), 6);
+		INIT_INI_ARRAY(&ahp->ah_iniCommon, ar9280Common_9280,
+			       ARRAY_SIZE(ar9280Common_9280), 2);
+	} else if (AR_SREV_9160_10_OR_LATER(ah)) {
+		INIT_INI_ARRAY(&ahp->ah_iniModes, ar5416Modes_9160,
+			       ARRAY_SIZE(ar5416Modes_9160), 6);
+		INIT_INI_ARRAY(&ahp->ah_iniCommon, ar5416Common_9160,
+			       ARRAY_SIZE(ar5416Common_9160), 2);
+		INIT_INI_ARRAY(&ahp->ah_iniBank0, ar5416Bank0_9160,
+			       ARRAY_SIZE(ar5416Bank0_9160), 2);
+		INIT_INI_ARRAY(&ahp->ah_iniBB_RfGain, ar5416BB_RfGain_9160,
+			       ARRAY_SIZE(ar5416BB_RfGain_9160), 3);
+		INIT_INI_ARRAY(&ahp->ah_iniBank1, ar5416Bank1_9160,
+			       ARRAY_SIZE(ar5416Bank1_9160), 2);
+		INIT_INI_ARRAY(&ahp->ah_iniBank2, ar5416Bank2_9160,
+			       ARRAY_SIZE(ar5416Bank2_9160), 2);
+		INIT_INI_ARRAY(&ahp->ah_iniBank3, ar5416Bank3_9160,
+			       ARRAY_SIZE(ar5416Bank3_9160), 3);
+		INIT_INI_ARRAY(&ahp->ah_iniBank6, ar5416Bank6_9160,
+			       ARRAY_SIZE(ar5416Bank6_9160), 3);
+		INIT_INI_ARRAY(&ahp->ah_iniBank6TPC, ar5416Bank6TPC_9160,
+			       ARRAY_SIZE(ar5416Bank6TPC_9160), 3);
+		INIT_INI_ARRAY(&ahp->ah_iniBank7, ar5416Bank7_9160,
+			       ARRAY_SIZE(ar5416Bank7_9160), 2);
+		if (AR_SREV_9160_11(ah)) {
+			INIT_INI_ARRAY(&ahp->ah_iniAddac,
+				       ar5416Addac_91601_1,
+				       ARRAY_SIZE(ar5416Addac_91601_1), 2);
+		} else {
+			INIT_INI_ARRAY(&ahp->ah_iniAddac, ar5416Addac_9160,
+				       ARRAY_SIZE(ar5416Addac_9160), 2);
+		}
+	} else if (AR_SREV_9100_OR_LATER(ah)) {
+		INIT_INI_ARRAY(&ahp->ah_iniModes, ar5416Modes_9100,
+			       ARRAY_SIZE(ar5416Modes_9100), 6);
+		INIT_INI_ARRAY(&ahp->ah_iniCommon, ar5416Common_9100,
+			       ARRAY_SIZE(ar5416Common_9100), 2);
+		INIT_INI_ARRAY(&ahp->ah_iniBank0, ar5416Bank0_9100,
+			       ARRAY_SIZE(ar5416Bank0_9100), 2);
+		INIT_INI_ARRAY(&ahp->ah_iniBB_RfGain, ar5416BB_RfGain_9100,
+			       ARRAY_SIZE(ar5416BB_RfGain_9100), 3);
+		INIT_INI_ARRAY(&ahp->ah_iniBank1, ar5416Bank1_9100,
+			       ARRAY_SIZE(ar5416Bank1_9100), 2);
+		INIT_INI_ARRAY(&ahp->ah_iniBank2, ar5416Bank2_9100,
+			       ARRAY_SIZE(ar5416Bank2_9100), 2);
+		INIT_INI_ARRAY(&ahp->ah_iniBank3, ar5416Bank3_9100,
+			       ARRAY_SIZE(ar5416Bank3_9100), 3);
+		INIT_INI_ARRAY(&ahp->ah_iniBank6, ar5416Bank6_9100,
+			       ARRAY_SIZE(ar5416Bank6_9100), 3);
+		INIT_INI_ARRAY(&ahp->ah_iniBank6TPC, ar5416Bank6TPC_9100,
+			       ARRAY_SIZE(ar5416Bank6TPC_9100), 3);
+		INIT_INI_ARRAY(&ahp->ah_iniBank7, ar5416Bank7_9100,
+			       ARRAY_SIZE(ar5416Bank7_9100), 2);
+		INIT_INI_ARRAY(&ahp->ah_iniAddac, ar5416Addac_9100,
+			       ARRAY_SIZE(ar5416Addac_9100), 2);
+	} else {
+		INIT_INI_ARRAY(&ahp->ah_iniModes, ar5416Modes,
+			       ARRAY_SIZE(ar5416Modes), 6);
+		INIT_INI_ARRAY(&ahp->ah_iniCommon, ar5416Common,
+			       ARRAY_SIZE(ar5416Common), 2);
+		INIT_INI_ARRAY(&ahp->ah_iniBank0, ar5416Bank0,
+			       ARRAY_SIZE(ar5416Bank0), 2);
+		INIT_INI_ARRAY(&ahp->ah_iniBB_RfGain, ar5416BB_RfGain,
+			       ARRAY_SIZE(ar5416BB_RfGain), 3);
+		INIT_INI_ARRAY(&ahp->ah_iniBank1, ar5416Bank1,
+			       ARRAY_SIZE(ar5416Bank1), 2);
+		INIT_INI_ARRAY(&ahp->ah_iniBank2, ar5416Bank2,
+			       ARRAY_SIZE(ar5416Bank2), 2);
+		INIT_INI_ARRAY(&ahp->ah_iniBank3, ar5416Bank3,
+			       ARRAY_SIZE(ar5416Bank3), 3);
+		INIT_INI_ARRAY(&ahp->ah_iniBank6, ar5416Bank6,
+			       ARRAY_SIZE(ar5416Bank6), 3);
+		INIT_INI_ARRAY(&ahp->ah_iniBank6TPC, ar5416Bank6TPC,
+			       ARRAY_SIZE(ar5416Bank6TPC), 3);
+		INIT_INI_ARRAY(&ahp->ah_iniBank7, ar5416Bank7,
+			       ARRAY_SIZE(ar5416Bank7), 2);
+		INIT_INI_ARRAY(&ahp->ah_iniAddac, ar5416Addac,
+			       ARRAY_SIZE(ar5416Addac), 2);
+	}
+
+	if (ah->ah_isPciExpress)
+		ath9k_hw_configpcipowersave(ah, 0);
+	else
+		ar5416DisablePciePhy(ah);
+
+	ecode = ath9k_hw_post_attach(ah);
+	if (ecode != 0)
+		goto bad;
+
+#ifndef CONFIG_SLOW_ANT_DIV
+	if (ah->ah_devid == AR9280_DEVID_PCI) {
+		for (i = 0; i < ahp->ah_iniModes.ia_rows; i++) {
+			u32 reg = INI_RA(&ahp->ah_iniModes, i, 0);
+
+			for (j = 1; j < ahp->ah_iniModes.ia_columns; j++) {
+				u32 val = INI_RA(&ahp->ah_iniModes, i, j);
+
+				INI_RA(&ahp->ah_iniModes, i, j) =
+					ath9k_hw_ini_fixup(ah, &ahp->ah_eeprom,
+							   reg, val);
+			}
+		}
+	}
+#endif
+
+	if (!ath9k_hw_fill_cap_info(ah)) {
+		DPRINTF(ah->ah_sc, ATH_DBG_RESET,
+			 "%s:failed ath9k_hw_fill_cap_info\n", __func__);
+		ecode = -EINVAL;
+		goto bad;
+	}
+
+	ecode = ath9k_hw_init_macaddr(ah);
+	if (ecode != 0) {
+		DPRINTF(ah->ah_sc, ATH_DBG_RESET,
+			 "%s: failed initializing mac address\n",
+			 __func__);
+		goto bad;
+	}
+
+	if (AR_SREV_9285(ah))
+		ah->ah_txTrigLevel = (AR_FTRIG_256B >> AR_FTRIG_S);
+	else
+		ah->ah_txTrigLevel = (AR_FTRIG_512B >> AR_FTRIG_S);
+
+#ifndef ATH_NF_PER_CHAN
+
+	ath9k_init_nfcal_hist_buffer(ah);
+#endif
+
+	return ah;
+
+bad:
+	if (ahp)
+		ath9k_hw_detach((struct ath_hal *) ahp);
+	if (status)
+		*status = ecode;
+	return NULL;
+}
+
+void ath9k_hw_detach(struct ath_hal *ah)
+{
+	if (!AR_SREV_9100(ah))
+		ath9k_hw_ani_detach(ah);
+	ath9k_hw_rfdetach(ah);
+
+	ath9k_hw_setpower(ah, ATH9K_PM_FULL_SLEEP);
+	kfree(ah);
+}
+
+bool ath9k_get_channel_edges(struct ath_hal *ah,
+			     u16 flags, u16 *low,
+			     u16 *high)
+{
+	struct ath9k_hw_capabilities *pCap = &ah->ah_caps;
+
+	if (flags & CHANNEL_5GHZ) {
+		*low = pCap->low_5ghz_chan;
+		*high = pCap->high_5ghz_chan;
+		return true;
+	}
+	if ((flags & CHANNEL_2GHZ)) {
+		*low = pCap->low_2ghz_chan;
+		*high = pCap->high_2ghz_chan;
+
+		return true;
+	}
+	return false;
+}
+
+static inline bool ath9k_hw_fill_vpd_table(u8 pwrMin,
+					   u8 pwrMax,
+					   u8 *pPwrList,
+					   u8 *pVpdList,
+					   u16
+					   numIntercepts,
+					   u8 *pRetVpdList)
+{
+	u16 i, k;
+	u8 currPwr = pwrMin;
+	u16 idxL = 0, idxR = 0;
+
+	for (i = 0; i <= (pwrMax - pwrMin) / 2; i++) {
+		ath9k_hw_get_lower_upper_index(currPwr, pPwrList,
+					       numIntercepts, &(idxL),
+					       &(idxR));
+		if (idxR < 1)
+			idxR = 1;
+		if (idxL == numIntercepts - 1)
+			idxL = (u16) (numIntercepts - 2);
+		if (pPwrList[idxL] == pPwrList[idxR])
+			k = pVpdList[idxL];
+		else
+			k = (u16) (((currPwr -
+					   pPwrList[idxL]) *
+					  pVpdList[idxR] +
+					  (pPwrList[idxR] -
+					   currPwr) * pVpdList[idxL]) /
+					 (pPwrList[idxR] -
+					  pPwrList[idxL]));
+		pRetVpdList[i] = (u8) k;
+		currPwr += 2;
+	}
+
+	return true;
+}
+
+static inline void
+ath9k_hw_get_gain_boundaries_pdadcs(struct ath_hal *ah,
+				    struct ath9k_channel *chan,
+				    struct cal_data_per_freq *pRawDataSet,
+				    u8 *bChans,
+				    u16 availPiers,
+				    u16 tPdGainOverlap,
+				    int16_t *pMinCalPower,
+				    u16 *pPdGainBoundaries,
+				    u8 *pPDADCValues,
+				    u16 numXpdGains)
+{
+	int i, j, k;
+	int16_t ss;
+	u16 idxL = 0, idxR = 0, numPiers;
+	static u8 vpdTableL[AR5416_NUM_PD_GAINS]
+		[AR5416_MAX_PWR_RANGE_IN_HALF_DB];
+	static u8 vpdTableR[AR5416_NUM_PD_GAINS]
+		[AR5416_MAX_PWR_RANGE_IN_HALF_DB];
+	static u8 vpdTableI[AR5416_NUM_PD_GAINS]
+		[AR5416_MAX_PWR_RANGE_IN_HALF_DB];
+
+	u8 *pVpdL, *pVpdR, *pPwrL, *pPwrR;
+	u8 minPwrT4[AR5416_NUM_PD_GAINS];
+	u8 maxPwrT4[AR5416_NUM_PD_GAINS];
+	int16_t vpdStep;
+	int16_t tmpVal;
+	u16 sizeCurrVpdTable, maxIndex, tgtIndex;
+	bool match;
+	int16_t minDelta = 0;
+	struct chan_centers centers;
+
+	ath9k_hw_get_channel_centers(ah, chan, &centers);
+
+	for (numPiers = 0; numPiers < availPiers; numPiers++) {
+		if (bChans[numPiers] == AR5416_BCHAN_UNUSED)
+			break;
+	}
+
+	match = ath9k_hw_get_lower_upper_index((u8)
+					       FREQ2FBIN(centers.
+							 synth_center,
+							 IS_CHAN_2GHZ
+							 (chan)), bChans,
+					       numPiers, &idxL, &idxR);
+
+	if (match) {
+		for (i = 0; i < numXpdGains; i++) {
+			minPwrT4[i] = pRawDataSet[idxL].pwrPdg[i][0];
+			maxPwrT4[i] = pRawDataSet[idxL].pwrPdg[i][4];
+			ath9k_hw_fill_vpd_table(minPwrT4[i], maxPwrT4[i],
+						pRawDataSet[idxL].
+						pwrPdg[i],
+						pRawDataSet[idxL].
+						vpdPdg[i],
+						AR5416_PD_GAIN_ICEPTS,
+						vpdTableI[i]);
+		}
+	} else {
+		for (i = 0; i < numXpdGains; i++) {
+			pVpdL = pRawDataSet[idxL].vpdPdg[i];
+			pPwrL = pRawDataSet[idxL].pwrPdg[i];
+			pVpdR = pRawDataSet[idxR].vpdPdg[i];
+			pPwrR = pRawDataSet[idxR].pwrPdg[i];
+
+			minPwrT4[i] = max(pPwrL[0], pPwrR[0]);
+
+			maxPwrT4[i] =
+				min(pPwrL[AR5416_PD_GAIN_ICEPTS - 1],
+				    pPwrR[AR5416_PD_GAIN_ICEPTS - 1]);
+
+
+			ath9k_hw_fill_vpd_table(minPwrT4[i], maxPwrT4[i],
+						pPwrL, pVpdL,
+						AR5416_PD_GAIN_ICEPTS,
+						vpdTableL[i]);
+			ath9k_hw_fill_vpd_table(minPwrT4[i], maxPwrT4[i],
+						pPwrR, pVpdR,
+						AR5416_PD_GAIN_ICEPTS,
+						vpdTableR[i]);
+
+			for (j = 0; j <= (maxPwrT4[i] - minPwrT4[i]) / 2; j++) {
+				vpdTableI[i][j] =
+					(u8) (ath9k_hw_interpolate
+						    ((u16)
+						     FREQ2FBIN(centers.
+							       synth_center,
+							       IS_CHAN_2GHZ
+							       (chan)),
+						     bChans[idxL],
+						     bChans[idxR], vpdTableL[i]
+						     [j], vpdTableR[i]
+						     [j]));
+			}
+		}
+	}
+
+	*pMinCalPower = (int16_t) (minPwrT4[0] / 2);
+
+	k = 0;
+	for (i = 0; i < numXpdGains; i++) {
+		if (i == (numXpdGains - 1))
+			pPdGainBoundaries[i] =
+				(u16) (maxPwrT4[i] / 2);
+		else
+			pPdGainBoundaries[i] =
+				(u16) ((maxPwrT4[i] +
+					      minPwrT4[i + 1]) / 4);
+
+		pPdGainBoundaries[i] =
+			min((u16) AR5416_MAX_RATE_POWER,
+			    pPdGainBoundaries[i]);
+
+		if ((i == 0) && !AR_SREV_5416_V20_OR_LATER(ah)) {
+			minDelta = pPdGainBoundaries[0] - 23;
+			pPdGainBoundaries[0] = 23;
+		} else {
+			minDelta = 0;
+		}
+
+		if (i == 0) {
+			if (AR_SREV_9280_10_OR_LATER(ah))
+				ss = (int16_t) (0 - (minPwrT4[i] / 2));
+			else
+				ss = 0;
+		} else {
+			ss = (int16_t) ((pPdGainBoundaries[i - 1] -
+					 (minPwrT4[i] / 2)) -
+					tPdGainOverlap + 1 + minDelta);
+		}
+		vpdStep = (int16_t) (vpdTableI[i][1] - vpdTableI[i][0]);
+		vpdStep = (int16_t) ((vpdStep < 1) ? 1 : vpdStep);
+
+		while ((ss < 0) && (k < (AR5416_NUM_PDADC_VALUES - 1))) {
+			tmpVal = (int16_t) (vpdTableI[i][0] + ss * vpdStep);
+			pPDADCValues[k++] =
+				(u8) ((tmpVal < 0) ? 0 : tmpVal);
+			ss++;
+		}
+
+		sizeCurrVpdTable =
+			(u8) ((maxPwrT4[i] - minPwrT4[i]) / 2 + 1);
+		tgtIndex = (u8) (pPdGainBoundaries[i] + tPdGainOverlap -
+				       (minPwrT4[i] / 2));
+		maxIndex = (tgtIndex <
+			    sizeCurrVpdTable) ? tgtIndex : sizeCurrVpdTable;
+
+		while ((ss < maxIndex)
+		       && (k < (AR5416_NUM_PDADC_VALUES - 1))) {
+			pPDADCValues[k++] = vpdTableI[i][ss++];
+		}
+
+		vpdStep = (int16_t) (vpdTableI[i][sizeCurrVpdTable - 1] -
+				     vpdTableI[i][sizeCurrVpdTable - 2]);
+		vpdStep = (int16_t) ((vpdStep < 1) ? 1 : vpdStep);
+
+		if (tgtIndex > maxIndex) {
+			while ((ss <= tgtIndex)
+			       && (k < (AR5416_NUM_PDADC_VALUES - 1))) {
+				tmpVal = (int16_t) ((vpdTableI[i]
+						     [sizeCurrVpdTable -
+						      1] + (ss - maxIndex +
+							    1) * vpdStep));
+				pPDADCValues[k++] = (u8) ((tmpVal >
+						 255) ? 255 : tmpVal);
+				ss++;
+			}
+		}
+	}
+
+	while (i < AR5416_PD_GAINS_IN_MASK) {
+		pPdGainBoundaries[i] = pPdGainBoundaries[i - 1];
+		i++;
+	}
+
+	while (k < AR5416_NUM_PDADC_VALUES) {
+		pPDADCValues[k] = pPDADCValues[k - 1];
+		k++;
+	}
+	return;
+}
+
+static inline bool
+ath9k_hw_set_power_cal_table(struct ath_hal *ah,
+			     struct ar5416_eeprom *pEepData,
+			     struct ath9k_channel *chan,
+			     int16_t *pTxPowerIndexOffset)
+{
+	struct cal_data_per_freq *pRawDataset;
+	u8 *pCalBChans = NULL;
+	u16 pdGainOverlap_t2;
+	static u8 pdadcValues[AR5416_NUM_PDADC_VALUES];
+	u16 gainBoundaries[AR5416_PD_GAINS_IN_MASK];
+	u16 numPiers, i, j;
+	int16_t tMinCalPower;
+	u16 numXpdGain, xpdMask;
+	u16 xpdGainValues[AR5416_NUM_PD_GAINS] = { 0, 0, 0, 0 };
+	u32 reg32, regOffset, regChainOffset;
+	int16_t modalIdx;
+	struct ath_hal_5416 *ahp = AH5416(ah);
+
+	modalIdx = IS_CHAN_2GHZ(chan) ? 1 : 0;
+	xpdMask = pEepData->modalHeader[modalIdx].xpdGain;
+
+	if ((pEepData->baseEepHeader.
+	     version & AR5416_EEP_VER_MINOR_MASK) >=
+	    AR5416_EEP_MINOR_VER_2) {
+		pdGainOverlap_t2 =
+			pEepData->modalHeader[modalIdx].pdGainOverlap;
+	} else {
+		pdGainOverlap_t2 =
+			(u16) (MS
+				     (REG_READ(ah, AR_PHY_TPCRG5),
+				      AR_PHY_TPCRG5_PD_GAIN_OVERLAP));
+	}
+
+	if (IS_CHAN_2GHZ(chan)) {
+		pCalBChans = pEepData->calFreqPier2G;
+		numPiers = AR5416_NUM_2G_CAL_PIERS;
+	} else {
+		pCalBChans = pEepData->calFreqPier5G;
+		numPiers = AR5416_NUM_5G_CAL_PIERS;
+	}
+
+	numXpdGain = 0;
+
+	for (i = 1; i <= AR5416_PD_GAINS_IN_MASK; i++) {
+		if ((xpdMask >> (AR5416_PD_GAINS_IN_MASK - i)) & 1) {
+			if (numXpdGain >= AR5416_NUM_PD_GAINS)
+				break;
+			xpdGainValues[numXpdGain] =
+				(u16) (AR5416_PD_GAINS_IN_MASK - i);
+			numXpdGain++;
+		}
+	}
+
+	REG_RMW_FIELD(ah, AR_PHY_TPCRG1, AR_PHY_TPCRG1_NUM_PD_GAIN,
+		      (numXpdGain - 1) & 0x3);
+	REG_RMW_FIELD(ah, AR_PHY_TPCRG1, AR_PHY_TPCRG1_PD_GAIN_1,
+		      xpdGainValues[0]);
+	REG_RMW_FIELD(ah, AR_PHY_TPCRG1, AR_PHY_TPCRG1_PD_GAIN_2,
+		      xpdGainValues[1]);
+	REG_RMW_FIELD(ah, AR_PHY_TPCRG1, AR_PHY_TPCRG1_PD_GAIN_3,
+		      xpdGainValues[2]);
+
+	for (i = 0; i < AR5416_MAX_CHAINS; i++) {
+		if (AR_SREV_5416_V20_OR_LATER(ah) &&
+		    (ahp->ah_rxchainmask == 5 || ahp->ah_txchainmask == 5)
+		    && (i != 0)) {
+			regChainOffset = (i == 1) ? 0x2000 : 0x1000;
+		} else
+			regChainOffset = i * 0x1000;
+		if (pEepData->baseEepHeader.txMask & (1 << i)) {
+			if (IS_CHAN_2GHZ(chan))
+				pRawDataset = pEepData->calPierData2G[i];
+			else
+				pRawDataset = pEepData->calPierData5G[i];
+
+			ath9k_hw_get_gain_boundaries_pdadcs(ah, chan,
+							    pRawDataset,
+							    pCalBChans,
+							    numPiers,
+							    pdGainOverlap_t2,
+							    &tMinCalPower,
+							    gainBoundaries,
+							    pdadcValues,
+							    numXpdGain);
+
+			if ((i == 0) || AR_SREV_5416_V20_OR_LATER(ah)) {
+
+				REG_WRITE(ah,
+					  AR_PHY_TPCRG5 + regChainOffset,
+					  SM(pdGainOverlap_t2,
+					     AR_PHY_TPCRG5_PD_GAIN_OVERLAP)
+					  | SM(gainBoundaries[0],
+					       AR_PHY_TPCRG5_PD_GAIN_BOUNDARY_1)
+					  | SM(gainBoundaries[1],
+					       AR_PHY_TPCRG5_PD_GAIN_BOUNDARY_2)
+					  | SM(gainBoundaries[2],
+					       AR_PHY_TPCRG5_PD_GAIN_BOUNDARY_3)
+					  | SM(gainBoundaries[3],
+				       AR_PHY_TPCRG5_PD_GAIN_BOUNDARY_4));
+			}
+
+			regOffset =
+				AR_PHY_BASE + (672 << 2) + regChainOffset;
+			for (j = 0; j < 32; j++) {
+				reg32 =
+					((pdadcValues[4 * j + 0] & 0xFF) << 0)
+					| ((pdadcValues[4 * j + 1] & 0xFF) <<
+					   8) | ((pdadcValues[4 * j + 2] &
+						  0xFF) << 16) |
+					((pdadcValues[4 * j + 3] & 0xFF) <<
+					 24);
+				REG_WRITE(ah, regOffset, reg32);
+
+				DPRINTF(ah->ah_sc, ATH_DBG_PHY_IO,
+					 "PDADC (%d,%4x): %4.4x %8.8x\n",
+					 i, regChainOffset, regOffset,
+					 reg32);
+				DPRINTF(ah->ah_sc, ATH_DBG_PHY_IO,
+				"PDADC: Chain %d | PDADC %3d Value %3d | "
+				"PDADC %3d Value %3d | PDADC %3d Value %3d | "
+				"PDADC %3d Value %3d |\n",
+					 i, 4 * j, pdadcValues[4 * j],
+					 4 * j + 1, pdadcValues[4 * j + 1],
+					 4 * j + 2, pdadcValues[4 * j + 2],
+					 4 * j + 3,
+					 pdadcValues[4 * j + 3]);
+
+				regOffset += 4;
+			}
+		}
+	}
+	*pTxPowerIndexOffset = 0;
+
+	return true;
+}
+
+void ath9k_hw_configpcipowersave(struct ath_hal *ah, int restore)
+{
+	struct ath_hal_5416 *ahp = AH5416(ah);
+	u8 i;
+
+	if (ah->ah_isPciExpress != true)
+		return;
+
+	if (ah->ah_config.pcie_powersave_enable == 2)
+		return;
+
+	if (restore)
+		return;
+
+	if (AR_SREV_9280_20_OR_LATER(ah)) {
+		for (i = 0; i < ahp->ah_iniPcieSerdes.ia_rows; i++) {
+			REG_WRITE(ah, INI_RA(&ahp->ah_iniPcieSerdes, i, 0),
+				  INI_RA(&ahp->ah_iniPcieSerdes, i, 1));
+		}
+		udelay(1000);
+	} else if (AR_SREV_9280(ah)
+		   && (ah->ah_macRev == AR_SREV_REVISION_9280_10)) {
+		REG_WRITE(ah, AR_PCIE_SERDES, 0x9248fd00);
+		REG_WRITE(ah, AR_PCIE_SERDES, 0x24924924);
+
+		REG_WRITE(ah, AR_PCIE_SERDES, 0xa8000019);
+		REG_WRITE(ah, AR_PCIE_SERDES, 0x13160820);
+		REG_WRITE(ah, AR_PCIE_SERDES, 0xe5980560);
+
+		if (ah->ah_config.pcie_clock_req)
+			REG_WRITE(ah, AR_PCIE_SERDES, 0x401deffc);
+		else
+			REG_WRITE(ah, AR_PCIE_SERDES, 0x401deffd);
+
+		REG_WRITE(ah, AR_PCIE_SERDES, 0x1aaabe40);
+		REG_WRITE(ah, AR_PCIE_SERDES, 0xbe105554);
+		REG_WRITE(ah, AR_PCIE_SERDES, 0x00043007);
+
+		REG_WRITE(ah, AR_PCIE_SERDES2, 0x00000000);
+
+		udelay(1000);
+	} else {
+		REG_WRITE(ah, AR_PCIE_SERDES, 0x9248fc00);
+		REG_WRITE(ah, AR_PCIE_SERDES, 0x24924924);
+		REG_WRITE(ah, AR_PCIE_SERDES, 0x28000039);
+		REG_WRITE(ah, AR_PCIE_SERDES, 0x53160824);
+		REG_WRITE(ah, AR_PCIE_SERDES, 0xe5980579);
+		REG_WRITE(ah, AR_PCIE_SERDES, 0x001defff);
+		REG_WRITE(ah, AR_PCIE_SERDES, 0x1aaabe40);
+		REG_WRITE(ah, AR_PCIE_SERDES, 0xbe105554);
+		REG_WRITE(ah, AR_PCIE_SERDES, 0x000e3007);
+		REG_WRITE(ah, AR_PCIE_SERDES2, 0x00000000);
+	}
+
+	REG_SET_BIT(ah, AR_PCIE_PM_CTRL, AR_PCIE_PM_CTRL_ENA);
+
+	if (ah->ah_config.pcie_waen) {
+		REG_WRITE(ah, AR_WA, ah->ah_config.pcie_waen);
+	} else {
+		if (AR_SREV_9280(ah))
+			REG_WRITE(ah, AR_WA, 0x0040073f);
+		else
+			REG_WRITE(ah, AR_WA, 0x0000073f);
+	}
+}
+
+static inline void
+ath9k_hw_get_legacy_target_powers(struct ath_hal *ah,
+				  struct ath9k_channel *chan,
+				  struct cal_target_power_leg *powInfo,
+				  u16 numChannels,
+				  struct cal_target_power_leg *pNewPower,
+				  u16 numRates,
+				  bool isExtTarget)
+{
+	u16 clo, chi;
+	int i;
+	int matchIndex = -1, lowIndex = -1;
+	u16 freq;
+	struct chan_centers centers;
+
+	ath9k_hw_get_channel_centers(ah, chan, &centers);
+	freq = (isExtTarget) ? centers.ext_center : centers.ctl_center;
+
+	if (freq <= ath9k_hw_fbin2freq(powInfo[0].bChannel,
+		IS_CHAN_2GHZ(chan))) {
+		matchIndex = 0;
+	} else {
+		for (i = 0; (i < numChannels)
+		     && (powInfo[i].bChannel != AR5416_BCHAN_UNUSED); i++) {
+			if (freq ==
+			    ath9k_hw_fbin2freq(powInfo[i].bChannel,
+					       IS_CHAN_2GHZ(chan))) {
+				matchIndex = i;
+				break;
+			} else if ((freq <
+				    ath9k_hw_fbin2freq(powInfo[i].bChannel,
+						       IS_CHAN_2GHZ(chan)))
+				   && (freq >
+				       ath9k_hw_fbin2freq(powInfo[i - 1].
+							  bChannel,
+							  IS_CHAN_2GHZ
+							  (chan)))) {
+				lowIndex = i - 1;
+				break;
+			}
+		}
+		if ((matchIndex == -1) && (lowIndex == -1))
+			matchIndex = i - 1;
+	}
+
+	if (matchIndex != -1) {
+		*pNewPower = powInfo[matchIndex];
+	} else {
+		clo = ath9k_hw_fbin2freq(powInfo[lowIndex].bChannel,
+					 IS_CHAN_2GHZ(chan));
+		chi = ath9k_hw_fbin2freq(powInfo[lowIndex + 1].bChannel,
+					 IS_CHAN_2GHZ(chan));
+
+		for (i = 0; i < numRates; i++) {
+			pNewPower->tPow2x[i] =
+				(u8) ath9k_hw_interpolate(freq, clo, chi,
+								powInfo
+								[lowIndex].
+								tPow2x[i],
+								powInfo
+								[lowIndex +
+								 1].tPow2x[i]);
+		}
+	}
+}
+
+static inline void
+ath9k_hw_get_target_powers(struct ath_hal *ah,
+			   struct ath9k_channel *chan,
+			   struct cal_target_power_ht *powInfo,
+			   u16 numChannels,
+			   struct cal_target_power_ht *pNewPower,
+			   u16 numRates,
+			   bool isHt40Target)
+{
+	u16 clo, chi;
+	int i;
+	int matchIndex = -1, lowIndex = -1;
+	u16 freq;
+	struct chan_centers centers;
+
+	ath9k_hw_get_channel_centers(ah, chan, &centers);
+	freq = isHt40Target ? centers.synth_center : centers.ctl_center;
+
+	if (freq <=
+		ath9k_hw_fbin2freq(powInfo[0].bChannel, IS_CHAN_2GHZ(chan))) {
+		matchIndex = 0;
+	} else {
+		for (i = 0; (i < numChannels)
+		     && (powInfo[i].bChannel != AR5416_BCHAN_UNUSED); i++) {
+			if (freq ==
+			    ath9k_hw_fbin2freq(powInfo[i].bChannel,
+					       IS_CHAN_2GHZ(chan))) {
+				matchIndex = i;
+				break;
+			} else
+				if ((freq <
+				     ath9k_hw_fbin2freq(powInfo[i].bChannel,
+							IS_CHAN_2GHZ(chan)))
+				    && (freq >
+					ath9k_hw_fbin2freq(powInfo[i - 1].
+							   bChannel,
+							   IS_CHAN_2GHZ
+							   (chan)))) {
+					lowIndex = i - 1;
+					break;
+				}
+		}
+		if ((matchIndex == -1) && (lowIndex == -1))
+			matchIndex = i - 1;
+	}
+
+	if (matchIndex != -1) {
+		*pNewPower = powInfo[matchIndex];
+	} else {
+		clo = ath9k_hw_fbin2freq(powInfo[lowIndex].bChannel,
+					 IS_CHAN_2GHZ(chan));
+		chi = ath9k_hw_fbin2freq(powInfo[lowIndex + 1].bChannel,
+					 IS_CHAN_2GHZ(chan));
+
+		for (i = 0; i < numRates; i++) {
+			pNewPower->tPow2x[i] =
+				(u8) ath9k_hw_interpolate(freq, clo, chi,
+								powInfo
+								[lowIndex].
+								tPow2x[i],
+								powInfo
+								[lowIndex +
+								 1].tPow2x[i]);
+		}
+	}
+}
+
+static inline u16
+ath9k_hw_get_max_edge_power(u16 freq,
+			    struct cal_ctl_edges *pRdEdgesPower,
+			    bool is2GHz)
+{
+	u16 twiceMaxEdgePower = AR5416_MAX_RATE_POWER;
+	int i;
+
+	for (i = 0; (i < AR5416_NUM_BAND_EDGES)
+	     && (pRdEdgesPower[i].bChannel != AR5416_BCHAN_UNUSED); i++) {
+		if (freq == ath9k_hw_fbin2freq(pRdEdgesPower[i].bChannel,
+					       is2GHz)) {
+			twiceMaxEdgePower = pRdEdgesPower[i].tPower;
+			break;
+		} else if ((i > 0)
+			   && (freq <
+			       ath9k_hw_fbin2freq(pRdEdgesPower[i].
+						  bChannel, is2GHz))) {
+			if (ath9k_hw_fbin2freq
+			    (pRdEdgesPower[i - 1].bChannel, is2GHz) < freq
+			    && pRdEdgesPower[i - 1].flag) {
+				twiceMaxEdgePower =
+					pRdEdgesPower[i - 1].tPower;
+			}
+			break;
+		}
+	}
+	return twiceMaxEdgePower;
+}
+
+static inline bool
+ath9k_hw_set_power_per_rate_table(struct ath_hal *ah,
+				  struct ar5416_eeprom *pEepData,
+				  struct ath9k_channel *chan,
+				  int16_t *ratesArray,
+				  u16 cfgCtl,
+				  u8 AntennaReduction,
+				  u8 twiceMaxRegulatoryPower,
+				  u8 powerLimit)
+{
+	u8 twiceMaxEdgePower = AR5416_MAX_RATE_POWER;
+	static const u16 tpScaleReductionTable[5] =
+		{ 0, 3, 6, 9, AR5416_MAX_RATE_POWER };
+
+	int i;
+	int8_t twiceLargestAntenna;
+	struct cal_ctl_data *rep;
+	struct cal_target_power_leg targetPowerOfdm, targetPowerCck = {
+		0, { 0, 0, 0, 0}
+	};
+	struct cal_target_power_leg targetPowerOfdmExt = {
+		0, { 0, 0, 0, 0} }, targetPowerCckExt = {
+		0, { 0, 0, 0, 0 }
+	};
+	struct cal_target_power_ht targetPowerHt20, targetPowerHt40 = {
+		0, {0, 0, 0, 0}
+	};
+	u8 scaledPower = 0, minCtlPower, maxRegAllowedPower;
+	u16 ctlModesFor11a[] =
+		{ CTL_11A, CTL_5GHT20, CTL_11A_EXT, CTL_5GHT40 };
+	u16 ctlModesFor11g[] =
+		{ CTL_11B, CTL_11G, CTL_2GHT20, CTL_11B_EXT, CTL_11G_EXT,
+		  CTL_2GHT40
+		};
+	u16 numCtlModes, *pCtlMode, ctlMode, freq;
+	struct chan_centers centers;
+	int tx_chainmask;
+	u8 twiceMinEdgePower;
+	struct ath_hal_5416 *ahp = AH5416(ah);
+
+	tx_chainmask = ahp->ah_txchainmask;
+
+	ath9k_hw_get_channel_centers(ah, chan, &centers);
+
+	twiceLargestAntenna = max(
+		pEepData->modalHeader
+			[IS_CHAN_2GHZ(chan)].antennaGainCh[0],
+		pEepData->modalHeader
+			[IS_CHAN_2GHZ(chan)].antennaGainCh[1]);
+
+	twiceLargestAntenna = max((u8) twiceLargestAntenna,
+		pEepData->modalHeader
+			[IS_CHAN_2GHZ(chan)].antennaGainCh[2]);
+
+	twiceLargestAntenna =
+		(int8_t) min(AntennaReduction - twiceLargestAntenna, 0);
+
+	maxRegAllowedPower = twiceMaxRegulatoryPower + twiceLargestAntenna;
+
+	if (ah->ah_tpScale != ATH9K_TP_SCALE_MAX) {
+		maxRegAllowedPower -=
+			(tpScaleReductionTable[(ah->ah_tpScale)] * 2);
+	}
+
+	scaledPower = min(powerLimit, maxRegAllowedPower);
+
+	switch (ar5416_get_ntxchains(tx_chainmask)) {
+	case 1:
+		break;
+	case 2:
+		scaledPower -=
+			pEepData->modalHeader[IS_CHAN_2GHZ(chan)].
+			pwrDecreaseFor2Chain;
+		break;
+	case 3:
+		scaledPower -=
+			pEepData->modalHeader[IS_CHAN_2GHZ(chan)].
+			pwrDecreaseFor3Chain;
+		break;
+	}
+
+	scaledPower = max(0, (int32_t) scaledPower);
+
+	if (IS_CHAN_2GHZ(chan)) {
+		numCtlModes =
+			ARRAY_SIZE(ctlModesFor11g) -
+			SUB_NUM_CTL_MODES_AT_2G_40;
+		pCtlMode = ctlModesFor11g;
+
+		ath9k_hw_get_legacy_target_powers(ah, chan,
+			pEepData->
+			calTargetPowerCck,
+			AR5416_NUM_2G_CCK_TARGET_POWERS,
+			&targetPowerCck, 4,
+			false);
+		ath9k_hw_get_legacy_target_powers(ah, chan,
+			pEepData->
+			calTargetPower2G,
+			AR5416_NUM_2G_20_TARGET_POWERS,
+			&targetPowerOfdm, 4,
+			false);
+		ath9k_hw_get_target_powers(ah, chan,
+			pEepData->calTargetPower2GHT20,
+			AR5416_NUM_2G_20_TARGET_POWERS,
+			&targetPowerHt20, 8, false);
+
+		if (IS_CHAN_HT40(chan)) {
+			numCtlModes = ARRAY_SIZE(ctlModesFor11g);
+			ath9k_hw_get_target_powers(ah, chan,
+				pEepData->
+				calTargetPower2GHT40,
+				AR5416_NUM_2G_40_TARGET_POWERS,
+				&targetPowerHt40, 8,
+				true);
+			ath9k_hw_get_legacy_target_powers(ah, chan,
+				pEepData->
+				calTargetPowerCck,
+				AR5416_NUM_2G_CCK_TARGET_POWERS,
+				&targetPowerCckExt,
+				4, true);
+			ath9k_hw_get_legacy_target_powers(ah, chan,
+				pEepData->
+				calTargetPower2G,
+				AR5416_NUM_2G_20_TARGET_POWERS,
+				&targetPowerOfdmExt,
+				4, true);
+		}
+	} else {
+
+		numCtlModes =
+			ARRAY_SIZE(ctlModesFor11a) -
+			SUB_NUM_CTL_MODES_AT_5G_40;
+		pCtlMode = ctlModesFor11a;
+
+		ath9k_hw_get_legacy_target_powers(ah, chan,
+			pEepData->
+			calTargetPower5G,
+			AR5416_NUM_5G_20_TARGET_POWERS,
+			&targetPowerOfdm, 4,
+			false);
+		ath9k_hw_get_target_powers(ah, chan,
+			pEepData->calTargetPower5GHT20,
+			AR5416_NUM_5G_20_TARGET_POWERS,
+			&targetPowerHt20, 8, false);
+
+		if (IS_CHAN_HT40(chan)) {
+			numCtlModes = ARRAY_SIZE(ctlModesFor11a);
+			ath9k_hw_get_target_powers(ah, chan,
+				pEepData->
+				calTargetPower5GHT40,
+				AR5416_NUM_5G_40_TARGET_POWERS,
+				&targetPowerHt40, 8,
+				true);
+			ath9k_hw_get_legacy_target_powers(ah, chan,
+				pEepData->
+				calTargetPower5G,
+				AR5416_NUM_5G_20_TARGET_POWERS,
+				&targetPowerOfdmExt,
+				4, true);
+		}
+	}
+
+	for (ctlMode = 0; ctlMode < numCtlModes; ctlMode++) {
+		bool isHt40CtlMode =
+			(pCtlMode[ctlMode] == CTL_5GHT40)
+			|| (pCtlMode[ctlMode] == CTL_2GHT40);
+		if (isHt40CtlMode)
+			freq = centers.synth_center;
+		else if (pCtlMode[ctlMode] & EXT_ADDITIVE)
+			freq = centers.ext_center;
+		else
+			freq = centers.ctl_center;
+
+		if (ar5416_get_eep_ver(ahp) == 14
+		    && ar5416_get_eep_rev(ahp) <= 2)
+			twiceMaxEdgePower = AR5416_MAX_RATE_POWER;
+
+		DPRINTF(ah->ah_sc, ATH_DBG_POWER_MGMT,
+			"LOOP-Mode ctlMode %d < %d, isHt40CtlMode %d, "
+			"EXT_ADDITIVE %d\n",
+			 ctlMode, numCtlModes, isHt40CtlMode,
+			 (pCtlMode[ctlMode] & EXT_ADDITIVE));
+
+		for (i = 0; (i < AR5416_NUM_CTLS) && pEepData->ctlIndex[i];
+		     i++) {
+			DPRINTF(ah->ah_sc, ATH_DBG_POWER_MGMT,
+				"  LOOP-Ctlidx %d: cfgCtl 0x%2.2x "
+				"pCtlMode 0x%2.2x ctlIndex 0x%2.2x "
+				"chan %d\n",
+				i, cfgCtl, pCtlMode[ctlMode],
+				pEepData->ctlIndex[i], chan->channel);
+
+			if ((((cfgCtl & ~CTL_MODE_M) |
+			      (pCtlMode[ctlMode] & CTL_MODE_M)) ==
+			     pEepData->ctlIndex[i])
+			    ||
+			    (((cfgCtl & ~CTL_MODE_M) |
+			      (pCtlMode[ctlMode] & CTL_MODE_M)) ==
+			     ((pEepData->
+			       ctlIndex[i] & CTL_MODE_M) | SD_NO_CTL))) {
+				rep = &(pEepData->ctlData[i]);
+
+				twiceMinEdgePower =
+					ath9k_hw_get_max_edge_power(freq,
+						rep->
+						ctlEdges
+						[ar5416_get_ntxchains
+						(tx_chainmask)
+						- 1],
+						IS_CHAN_2GHZ
+						(chan));
+
+				DPRINTF(ah->ah_sc, ATH_DBG_POWER_MGMT,
+					"    MATCH-EE_IDX %d: ch %d is2 %d "
+					"2xMinEdge %d chainmask %d chains %d\n",
+					 i, freq, IS_CHAN_2GHZ(chan),
+					 twiceMinEdgePower, tx_chainmask,
+					 ar5416_get_ntxchains
+					 (tx_chainmask));
+				if ((cfgCtl & ~CTL_MODE_M) == SD_NO_CTL) {
+					twiceMaxEdgePower =
+						min(twiceMaxEdgePower,
+						    twiceMinEdgePower);
+				} else {
+					twiceMaxEdgePower =
+						twiceMinEdgePower;
+					break;
+				}
+			}
+		}
+
+		minCtlPower = min(twiceMaxEdgePower, scaledPower);
+
+		DPRINTF(ah->ah_sc, ATH_DBG_POWER_MGMT,
+				"    SEL-Min ctlMode %d pCtlMode %d "
+				"2xMaxEdge %d sP %d minCtlPwr %d\n",
+			 ctlMode, pCtlMode[ctlMode], twiceMaxEdgePower,
+			 scaledPower, minCtlPower);
+
+		switch (pCtlMode[ctlMode]) {
+		case CTL_11B:
+			for (i = 0; i < ARRAY_SIZE(targetPowerCck.tPow2x);
+			     i++) {
+				targetPowerCck.tPow2x[i] =
+					min(targetPowerCck.tPow2x[i],
+					    minCtlPower);
+			}
+			break;
+		case CTL_11A:
+		case CTL_11G:
+			for (i = 0; i < ARRAY_SIZE(targetPowerOfdm.tPow2x);
+			     i++) {
+				targetPowerOfdm.tPow2x[i] =
+					min(targetPowerOfdm.tPow2x[i],
+					    minCtlPower);
+			}
+			break;
+		case CTL_5GHT20:
+		case CTL_2GHT20:
+			for (i = 0; i < ARRAY_SIZE(targetPowerHt20.tPow2x);
+			     i++) {
+				targetPowerHt20.tPow2x[i] =
+					min(targetPowerHt20.tPow2x[i],
+					    minCtlPower);
+			}
+			break;
+		case CTL_11B_EXT:
+			targetPowerCckExt.tPow2x[0] =
+				min(targetPowerCckExt.tPow2x[0], minCtlPower);
+			break;
+		case CTL_11A_EXT:
+		case CTL_11G_EXT:
+			targetPowerOfdmExt.tPow2x[0] =
+				min(targetPowerOfdmExt.tPow2x[0], minCtlPower);
+			break;
+		case CTL_5GHT40:
+		case CTL_2GHT40:
+			for (i = 0; i < ARRAY_SIZE(targetPowerHt40.tPow2x);
+			     i++) {
+				targetPowerHt40.tPow2x[i] =
+					min(targetPowerHt40.tPow2x[i],
+					    minCtlPower);
+			}
+			break;
+		default:
+			break;
+		}
+	}
+
+	ratesArray[rate6mb] = ratesArray[rate9mb] = ratesArray[rate12mb] =
+		ratesArray[rate18mb] = ratesArray[rate24mb] =
+		targetPowerOfdm.tPow2x[0];
+	ratesArray[rate36mb] = targetPowerOfdm.tPow2x[1];
+	ratesArray[rate48mb] = targetPowerOfdm.tPow2x[2];
+	ratesArray[rate54mb] = targetPowerOfdm.tPow2x[3];
+	ratesArray[rateXr] = targetPowerOfdm.tPow2x[0];
+
+	for (i = 0; i < ARRAY_SIZE(targetPowerHt20.tPow2x); i++)
+		ratesArray[rateHt20_0 + i] = targetPowerHt20.tPow2x[i];
+
+	if (IS_CHAN_2GHZ(chan)) {
+		ratesArray[rate1l] = targetPowerCck.tPow2x[0];
+		ratesArray[rate2s] = ratesArray[rate2l] =
+			targetPowerCck.tPow2x[1];
+		ratesArray[rate5_5s] = ratesArray[rate5_5l] =
+			targetPowerCck.tPow2x[2];
+		;
+		ratesArray[rate11s] = ratesArray[rate11l] =
+			targetPowerCck.tPow2x[3];
+		;
+	}
+	if (IS_CHAN_HT40(chan)) {
+		for (i = 0; i < ARRAY_SIZE(targetPowerHt40.tPow2x); i++) {
+			ratesArray[rateHt40_0 + i] =
+				targetPowerHt40.tPow2x[i];
+		}
+		ratesArray[rateDupOfdm] = targetPowerHt40.tPow2x[0];
+		ratesArray[rateDupCck] = targetPowerHt40.tPow2x[0];
+		ratesArray[rateExtOfdm] = targetPowerOfdmExt.tPow2x[0];
+		if (IS_CHAN_2GHZ(chan)) {
+			ratesArray[rateExtCck] =
+				targetPowerCckExt.tPow2x[0];
+		}
+	}
+	return true;
+}
+
+static int
+ath9k_hw_set_txpower(struct ath_hal *ah,
+		     struct ar5416_eeprom *pEepData,
+		     struct ath9k_channel *chan,
+		     u16 cfgCtl,
+		     u8 twiceAntennaReduction,
+		     u8 twiceMaxRegulatoryPower,
+		     u8 powerLimit)
+{
+	struct modal_eep_header *pModal =
+		&(pEepData->modalHeader[IS_CHAN_2GHZ(chan)]);
+	int16_t ratesArray[Ar5416RateSize];
+	int16_t txPowerIndexOffset = 0;
+	u8 ht40PowerIncForPdadc = 2;
+	int i;
+
+	memset(ratesArray, 0, sizeof(ratesArray));
+
+	if ((pEepData->baseEepHeader.
+	     version & AR5416_EEP_VER_MINOR_MASK) >=
+	    AR5416_EEP_MINOR_VER_2) {
+		ht40PowerIncForPdadc = pModal->ht40PowerIncForPdadc;
+	}
+
+	if (!ath9k_hw_set_power_per_rate_table(ah, pEepData, chan,
+					       &ratesArray[0], cfgCtl,
+					       twiceAntennaReduction,
+					       twiceMaxRegulatoryPower,
+					       powerLimit)) {
+		DPRINTF(ah->ah_sc, ATH_DBG_EEPROM,
+			"ath9k_hw_set_txpower: unable to set "
+			"tx power per rate table\n");
+		return -EIO;
+	}
+
+	if (!ath9k_hw_set_power_cal_table
+	    (ah, pEepData, chan, &txPowerIndexOffset)) {
+		DPRINTF(ah->ah_sc, ATH_DBG_EEPROM,
+			 "ath9k_hw_set_txpower: unable to set power table\n");
+		return -EIO;
+	}
+
+	for (i = 0; i < ARRAY_SIZE(ratesArray); i++) {
+		ratesArray[i] =
+			(int16_t) (txPowerIndexOffset + ratesArray[i]);
+		if (ratesArray[i] > AR5416_MAX_RATE_POWER)
+			ratesArray[i] = AR5416_MAX_RATE_POWER;
+	}
+
+	if (AR_SREV_9280_10_OR_LATER(ah)) {
+		for (i = 0; i < Ar5416RateSize; i++)
+			ratesArray[i] -= AR5416_PWR_TABLE_OFFSET * 2;
+	}
+
+	REG_WRITE(ah, AR_PHY_POWER_TX_RATE1,
+		  ATH9K_POW_SM(ratesArray[rate18mb], 24)
+		  | ATH9K_POW_SM(ratesArray[rate12mb], 16)
+		  | ATH9K_POW_SM(ratesArray[rate9mb], 8)
+		  | ATH9K_POW_SM(ratesArray[rate6mb], 0)
+		);
+	REG_WRITE(ah, AR_PHY_POWER_TX_RATE2,
+		  ATH9K_POW_SM(ratesArray[rate54mb], 24)
+		  | ATH9K_POW_SM(ratesArray[rate48mb], 16)
+		  | ATH9K_POW_SM(ratesArray[rate36mb], 8)
+		  | ATH9K_POW_SM(ratesArray[rate24mb], 0)
+		);
+
+	if (IS_CHAN_2GHZ(chan)) {
+		REG_WRITE(ah, AR_PHY_POWER_TX_RATE3,
+			  ATH9K_POW_SM(ratesArray[rate2s], 24)
+			  | ATH9K_POW_SM(ratesArray[rate2l], 16)
+			  | ATH9K_POW_SM(ratesArray[rateXr], 8)
+			  | ATH9K_POW_SM(ratesArray[rate1l], 0)
+			);
+		REG_WRITE(ah, AR_PHY_POWER_TX_RATE4,
+			  ATH9K_POW_SM(ratesArray[rate11s], 24)
+			  | ATH9K_POW_SM(ratesArray[rate11l], 16)
+			  | ATH9K_POW_SM(ratesArray[rate5_5s], 8)
+			  | ATH9K_POW_SM(ratesArray[rate5_5l], 0)
+			);
+	}
+
+	REG_WRITE(ah, AR_PHY_POWER_TX_RATE5,
+		  ATH9K_POW_SM(ratesArray[rateHt20_3], 24)
+		  | ATH9K_POW_SM(ratesArray[rateHt20_2], 16)
+		  | ATH9K_POW_SM(ratesArray[rateHt20_1], 8)
+		  | ATH9K_POW_SM(ratesArray[rateHt20_0], 0)
+		);
+	REG_WRITE(ah, AR_PHY_POWER_TX_RATE6,
+		  ATH9K_POW_SM(ratesArray[rateHt20_7], 24)
+		  | ATH9K_POW_SM(ratesArray[rateHt20_6], 16)
+		  | ATH9K_POW_SM(ratesArray[rateHt20_5], 8)
+		  | ATH9K_POW_SM(ratesArray[rateHt20_4], 0)
+		);
+
+	if (IS_CHAN_HT40(chan)) {
+		REG_WRITE(ah, AR_PHY_POWER_TX_RATE7,
+			  ATH9K_POW_SM(ratesArray[rateHt40_3] +
+				       ht40PowerIncForPdadc, 24)
+			  | ATH9K_POW_SM(ratesArray[rateHt40_2] +
+					 ht40PowerIncForPdadc, 16)
+			  | ATH9K_POW_SM(ratesArray[rateHt40_1] +
+					 ht40PowerIncForPdadc, 8)
+			  | ATH9K_POW_SM(ratesArray[rateHt40_0] +
+					 ht40PowerIncForPdadc, 0)
+			);
+		REG_WRITE(ah, AR_PHY_POWER_TX_RATE8,
+			  ATH9K_POW_SM(ratesArray[rateHt40_7] +
+				       ht40PowerIncForPdadc, 24)
+			  | ATH9K_POW_SM(ratesArray[rateHt40_6] +
+					 ht40PowerIncForPdadc, 16)
+			  | ATH9K_POW_SM(ratesArray[rateHt40_5] +
+					 ht40PowerIncForPdadc, 8)
+			  | ATH9K_POW_SM(ratesArray[rateHt40_4] +
+					 ht40PowerIncForPdadc, 0)
+			);
+
+		REG_WRITE(ah, AR_PHY_POWER_TX_RATE9,
+			  ATH9K_POW_SM(ratesArray[rateExtOfdm], 24)
+			  | ATH9K_POW_SM(ratesArray[rateExtCck], 16)
+			  | ATH9K_POW_SM(ratesArray[rateDupOfdm], 8)
+			  | ATH9K_POW_SM(ratesArray[rateDupCck], 0)
+			);
+	}
+
+	REG_WRITE(ah, AR_PHY_POWER_TX_SUB,
+		  ATH9K_POW_SM(pModal->pwrDecreaseFor3Chain, 6)
+		  | ATH9K_POW_SM(pModal->pwrDecreaseFor2Chain, 0)
+		);
+
+	i = rate6mb;
+	if (IS_CHAN_HT40(chan))
+		i = rateHt40_0;
+	else if (IS_CHAN_HT20(chan))
+		i = rateHt20_0;
+
+	if (AR_SREV_9280_10_OR_LATER(ah))
+		ah->ah_maxPowerLevel =
+			ratesArray[i] + AR5416_PWR_TABLE_OFFSET * 2;
+	else
+		ah->ah_maxPowerLevel = ratesArray[i];
+
+	return 0;
+}
+
+static inline void ath9k_hw_get_delta_slope_vals(struct ath_hal *ah,
+						 u32 coef_scaled,
+						 u32 *coef_mantissa,
+						 u32 *coef_exponent)
+{
+	u32 coef_exp, coef_man;
+
+	for (coef_exp = 31; coef_exp > 0; coef_exp--)
+		if ((coef_scaled >> coef_exp) & 0x1)
+			break;
+
+	coef_exp = 14 - (coef_exp - COEF_SCALE_S);
+
+	coef_man = coef_scaled + (1 << (COEF_SCALE_S - coef_exp - 1));
+
+	*coef_mantissa = coef_man >> (COEF_SCALE_S - coef_exp);
+	*coef_exponent = coef_exp - 16;
+}
+
+static void
+ath9k_hw_set_delta_slope(struct ath_hal *ah,
+			 struct ath9k_channel *chan)
+{
+	u32 coef_scaled, ds_coef_exp, ds_coef_man;
+	u32 clockMhzScaled = 0x64000000;
+	struct chan_centers centers;
+
+	if (IS_CHAN_HALF_RATE(chan))
+		clockMhzScaled = clockMhzScaled >> 1;
+	else if (IS_CHAN_QUARTER_RATE(chan))
+		clockMhzScaled = clockMhzScaled >> 2;
+
+	ath9k_hw_get_channel_centers(ah, chan, &centers);
+	coef_scaled = clockMhzScaled / centers.synth_center;
+
+	ath9k_hw_get_delta_slope_vals(ah, coef_scaled, &ds_coef_man,
+				      &ds_coef_exp);
+
+	REG_RMW_FIELD(ah, AR_PHY_TIMING3,
+		      AR_PHY_TIMING3_DSC_MAN, ds_coef_man);
+	REG_RMW_FIELD(ah, AR_PHY_TIMING3,
+		      AR_PHY_TIMING3_DSC_EXP, ds_coef_exp);
+
+	coef_scaled = (9 * coef_scaled) / 10;
+
+	ath9k_hw_get_delta_slope_vals(ah, coef_scaled, &ds_coef_man,
+				      &ds_coef_exp);
+
+	REG_RMW_FIELD(ah, AR_PHY_HALFGI,
+		      AR_PHY_HALFGI_DSC_MAN, ds_coef_man);
+	REG_RMW_FIELD(ah, AR_PHY_HALFGI,
+		      AR_PHY_HALFGI_DSC_EXP, ds_coef_exp);
+}
+
+static void ath9k_hw_9280_spur_mitigate(struct ath_hal *ah,
+					struct ath9k_channel *chan)
+{
+	int bb_spur = AR_NO_SPUR;
+	int freq;
+	int bin, cur_bin;
+	int bb_spur_off, spur_subchannel_sd;
+	int spur_freq_sd;
+	int spur_delta_phase;
+	int denominator;
+	int upper, lower, cur_vit_mask;
+	int tmp, newVal;
+	int i;
+	int pilot_mask_reg[4] = { AR_PHY_TIMING7, AR_PHY_TIMING8,
+			  AR_PHY_PILOT_MASK_01_30, AR_PHY_PILOT_MASK_31_60
+	};
+	int chan_mask_reg[4] = { AR_PHY_TIMING9, AR_PHY_TIMING10,
+			 AR_PHY_CHANNEL_MASK_01_30, AR_PHY_CHANNEL_MASK_31_60
+	};
+	int inc[4] = { 0, 100, 0, 0 };
+	struct chan_centers centers;
+
+	int8_t mask_m[123];
+	int8_t mask_p[123];
+	int8_t mask_amt;
+	int tmp_mask;
+	int cur_bb_spur;
+	bool is2GHz = IS_CHAN_2GHZ(chan);
+
+	memset(&mask_m, 0, sizeof(int8_t) * 123);
+	memset(&mask_p, 0, sizeof(int8_t) * 123);
+
+	ath9k_hw_get_channel_centers(ah, chan, &centers);
+	freq = centers.synth_center;
+
+	ah->ah_config.spurmode = SPUR_ENABLE_EEPROM;
+	for (i = 0; i < AR_EEPROM_MODAL_SPURS; i++) {
+		cur_bb_spur = ath9k_hw_eeprom_get_spur_chan(ah, i, is2GHz);
+
+		if (is2GHz)
+			cur_bb_spur = (cur_bb_spur / 10) + AR_BASE_FREQ_2GHZ;
+		else
+			cur_bb_spur = (cur_bb_spur / 10) + AR_BASE_FREQ_5GHZ;
+
+		if (AR_NO_SPUR == cur_bb_spur)
+			break;
+		cur_bb_spur = cur_bb_spur - freq;
+
+		if (IS_CHAN_HT40(chan)) {
+			if ((cur_bb_spur > -AR_SPUR_FEEQ_BOUND_HT40) &&
+			    (cur_bb_spur < AR_SPUR_FEEQ_BOUND_HT40)) {
+				bb_spur = cur_bb_spur;
+				break;
+			}
+		} else if ((cur_bb_spur > -AR_SPUR_FEEQ_BOUND_HT20) &&
+			   (cur_bb_spur < AR_SPUR_FEEQ_BOUND_HT20)) {
+			bb_spur = cur_bb_spur;
+			break;
+		}
+	}
+
+	if (AR_NO_SPUR == bb_spur) {
+		REG_CLR_BIT(ah, AR_PHY_FORCE_CLKEN_CCK,
+			    AR_PHY_FORCE_CLKEN_CCK_MRC_MUX);
+		return;
+	} else {
+		REG_CLR_BIT(ah, AR_PHY_FORCE_CLKEN_CCK,
+			    AR_PHY_FORCE_CLKEN_CCK_MRC_MUX);
+	}
+
+	bin = bb_spur * 320;
+
+	tmp = REG_READ(ah, AR_PHY_TIMING_CTRL4(0));
+
+	newVal = tmp | (AR_PHY_TIMING_CTRL4_ENABLE_SPUR_RSSI |
+			AR_PHY_TIMING_CTRL4_ENABLE_SPUR_FILTER |
+			AR_PHY_TIMING_CTRL4_ENABLE_CHAN_MASK |
+			AR_PHY_TIMING_CTRL4_ENABLE_PILOT_MASK);
+	REG_WRITE(ah, AR_PHY_TIMING_CTRL4(0), newVal);
+
+	newVal = (AR_PHY_SPUR_REG_MASK_RATE_CNTL |
+		  AR_PHY_SPUR_REG_ENABLE_MASK_PPM |
+		  AR_PHY_SPUR_REG_MASK_RATE_SELECT |
+		  AR_PHY_SPUR_REG_ENABLE_VIT_SPUR_RSSI |
+		  SM(SPUR_RSSI_THRESH, AR_PHY_SPUR_REG_SPUR_RSSI_THRESH));
+	REG_WRITE(ah, AR_PHY_SPUR_REG, newVal);
+
+	if (IS_CHAN_HT40(chan)) {
+		if (bb_spur < 0) {
+			spur_subchannel_sd = 1;
+			bb_spur_off = bb_spur + 10;
+		} else {
+			spur_subchannel_sd = 0;
+			bb_spur_off = bb_spur - 10;
+		}
+	} else {
+		spur_subchannel_sd = 0;
+		bb_spur_off = bb_spur;
+	}
+
+	if (IS_CHAN_HT40(chan))
+		spur_delta_phase =
+			((bb_spur * 262144) /
+			 10) & AR_PHY_TIMING11_SPUR_DELTA_PHASE;
+	else
+		spur_delta_phase =
+			((bb_spur * 524288) /
+			 10) & AR_PHY_TIMING11_SPUR_DELTA_PHASE;
+
+	denominator = IS_CHAN_2GHZ(chan) ? 44 : 40;
+	spur_freq_sd = ((bb_spur_off * 2048) / denominator) & 0x3ff;
+
+	newVal = (AR_PHY_TIMING11_USE_SPUR_IN_AGC |
+		  SM(spur_freq_sd, AR_PHY_TIMING11_SPUR_FREQ_SD) |
+		  SM(spur_delta_phase, AR_PHY_TIMING11_SPUR_DELTA_PHASE));
+	REG_WRITE(ah, AR_PHY_TIMING11, newVal);
+
+	newVal = spur_subchannel_sd << AR_PHY_SFCORR_SPUR_SUBCHNL_SD_S;
+	REG_WRITE(ah, AR_PHY_SFCORR_EXT, newVal);
+
+	cur_bin = -6000;
+	upper = bin + 100;
+	lower = bin - 100;
+
+	for (i = 0; i < 4; i++) {
+		int pilot_mask = 0;
+		int chan_mask = 0;
+		int bp = 0;
+		for (bp = 0; bp < 30; bp++) {
+			if ((cur_bin > lower) && (cur_bin < upper)) {
+				pilot_mask = pilot_mask | 0x1 << bp;
+				chan_mask = chan_mask | 0x1 << bp;
+			}
+			cur_bin += 100;
+		}
+		cur_bin += inc[i];
+		REG_WRITE(ah, pilot_mask_reg[i], pilot_mask);
+		REG_WRITE(ah, chan_mask_reg[i], chan_mask);
+	}
+
+	cur_vit_mask = 6100;
+	upper = bin + 120;
+	lower = bin - 120;
+
+	for (i = 0; i < 123; i++) {
+		if ((cur_vit_mask > lower) && (cur_vit_mask < upper)) {
+
+			/* workaround for gcc bug #37014 */
+			volatile int tmp = abs(cur_vit_mask - bin);
+
+			if (tmp < 75)
+				mask_amt = 1;
+			else
+				mask_amt = 0;
+			if (cur_vit_mask < 0)
+				mask_m[abs(cur_vit_mask / 100)] = mask_amt;
+			else
+				mask_p[cur_vit_mask / 100] = mask_amt;
+		}
+		cur_vit_mask -= 100;
+	}
+
+	tmp_mask = (mask_m[46] << 30) | (mask_m[47] << 28)
+		| (mask_m[48] << 26) | (mask_m[49] << 24)
+		| (mask_m[50] << 22) | (mask_m[51] << 20)
+		| (mask_m[52] << 18) | (mask_m[53] << 16)
+		| (mask_m[54] << 14) | (mask_m[55] << 12)
+		| (mask_m[56] << 10) | (mask_m[57] << 8)
+		| (mask_m[58] << 6) | (mask_m[59] << 4)
+		| (mask_m[60] << 2) | (mask_m[61] << 0);
+	REG_WRITE(ah, AR_PHY_BIN_MASK_1, tmp_mask);
+	REG_WRITE(ah, AR_PHY_VIT_MASK2_M_46_61, tmp_mask);
+
+	tmp_mask = (mask_m[31] << 28)
+		| (mask_m[32] << 26) | (mask_m[33] << 24)
+		| (mask_m[34] << 22) | (mask_m[35] << 20)
+		| (mask_m[36] << 18) | (mask_m[37] << 16)
+		| (mask_m[48] << 14) | (mask_m[39] << 12)
+		| (mask_m[40] << 10) | (mask_m[41] << 8)
+		| (mask_m[42] << 6) | (mask_m[43] << 4)
+		| (mask_m[44] << 2) | (mask_m[45] << 0);
+	REG_WRITE(ah, AR_PHY_BIN_MASK_2, tmp_mask);
+	REG_WRITE(ah, AR_PHY_MASK2_M_31_45, tmp_mask);
+
+	tmp_mask = (mask_m[16] << 30) | (mask_m[16] << 28)
+		| (mask_m[18] << 26) | (mask_m[18] << 24)
+		| (mask_m[20] << 22) | (mask_m[20] << 20)
+		| (mask_m[22] << 18) | (mask_m[22] << 16)
+		| (mask_m[24] << 14) | (mask_m[24] << 12)
+		| (mask_m[25] << 10) | (mask_m[26] << 8)
+		| (mask_m[27] << 6) | (mask_m[28] << 4)
+		| (mask_m[29] << 2) | (mask_m[30] << 0);
+	REG_WRITE(ah, AR_PHY_BIN_MASK_3, tmp_mask);
+	REG_WRITE(ah, AR_PHY_MASK2_M_16_30, tmp_mask);
+
+	tmp_mask = (mask_m[0] << 30) | (mask_m[1] << 28)
+		| (mask_m[2] << 26) | (mask_m[3] << 24)
+		| (mask_m[4] << 22) | (mask_m[5] << 20)
+		| (mask_m[6] << 18) | (mask_m[7] << 16)
+		| (mask_m[8] << 14) | (mask_m[9] << 12)
+		| (mask_m[10] << 10) | (mask_m[11] << 8)
+		| (mask_m[12] << 6) | (mask_m[13] << 4)
+		| (mask_m[14] << 2) | (mask_m[15] << 0);
+	REG_WRITE(ah, AR_PHY_MASK_CTL, tmp_mask);
+	REG_WRITE(ah, AR_PHY_MASK2_M_00_15, tmp_mask);
+
+	tmp_mask = (mask_p[15] << 28)
+		| (mask_p[14] << 26) | (mask_p[13] << 24)
+		| (mask_p[12] << 22) | (mask_p[11] << 20)
+		| (mask_p[10] << 18) | (mask_p[9] << 16)
+		| (mask_p[8] << 14) | (mask_p[7] << 12)
+		| (mask_p[6] << 10) | (mask_p[5] << 8)
+		| (mask_p[4] << 6) | (mask_p[3] << 4)
+		| (mask_p[2] << 2) | (mask_p[1] << 0);
+	REG_WRITE(ah, AR_PHY_BIN_MASK2_1, tmp_mask);
+	REG_WRITE(ah, AR_PHY_MASK2_P_15_01, tmp_mask);
+
+	tmp_mask = (mask_p[30] << 28)
+		| (mask_p[29] << 26) | (mask_p[28] << 24)
+		| (mask_p[27] << 22) | (mask_p[26] << 20)
+		| (mask_p[25] << 18) | (mask_p[24] << 16)
+		| (mask_p[23] << 14) | (mask_p[22] << 12)
+		| (mask_p[21] << 10) | (mask_p[20] << 8)
+		| (mask_p[19] << 6) | (mask_p[18] << 4)
+		| (mask_p[17] << 2) | (mask_p[16] << 0);
+	REG_WRITE(ah, AR_PHY_BIN_MASK2_2, tmp_mask);
+	REG_WRITE(ah, AR_PHY_MASK2_P_30_16, tmp_mask);
+
+	tmp_mask = (mask_p[45] << 28)
+		| (mask_p[44] << 26) | (mask_p[43] << 24)
+		| (mask_p[42] << 22) | (mask_p[41] << 20)
+		| (mask_p[40] << 18) | (mask_p[39] << 16)
+		| (mask_p[38] << 14) | (mask_p[37] << 12)
+		| (mask_p[36] << 10) | (mask_p[35] << 8)
+		| (mask_p[34] << 6) | (mask_p[33] << 4)
+		| (mask_p[32] << 2) | (mask_p[31] << 0);
+	REG_WRITE(ah, AR_PHY_BIN_MASK2_3, tmp_mask);
+	REG_WRITE(ah, AR_PHY_MASK2_P_45_31, tmp_mask);
+
+	tmp_mask = (mask_p[61] << 30) | (mask_p[60] << 28)
+		| (mask_p[59] << 26) | (mask_p[58] << 24)
+		| (mask_p[57] << 22) | (mask_p[56] << 20)
+		| (mask_p[55] << 18) | (mask_p[54] << 16)
+		| (mask_p[53] << 14) | (mask_p[52] << 12)
+		| (mask_p[51] << 10) | (mask_p[50] << 8)
+		| (mask_p[49] << 6) | (mask_p[48] << 4)
+		| (mask_p[47] << 2) | (mask_p[46] << 0);
+	REG_WRITE(ah, AR_PHY_BIN_MASK2_4, tmp_mask);
+	REG_WRITE(ah, AR_PHY_MASK2_P_61_45, tmp_mask);
+}
+
+static void ath9k_hw_spur_mitigate(struct ath_hal *ah,
+				   struct ath9k_channel *chan)
+{
+	int bb_spur = AR_NO_SPUR;
+	int bin, cur_bin;
+	int spur_freq_sd;
+	int spur_delta_phase;
+	int denominator;
+	int upper, lower, cur_vit_mask;
+	int tmp, new;
+	int i;
+	int pilot_mask_reg[4] = { AR_PHY_TIMING7, AR_PHY_TIMING8,
+			  AR_PHY_PILOT_MASK_01_30, AR_PHY_PILOT_MASK_31_60
+	};
+	int chan_mask_reg[4] = { AR_PHY_TIMING9, AR_PHY_TIMING10,
+			 AR_PHY_CHANNEL_MASK_01_30, AR_PHY_CHANNEL_MASK_31_60
+	};
+	int inc[4] = { 0, 100, 0, 0 };
+
+	int8_t mask_m[123];
+	int8_t mask_p[123];
+	int8_t mask_amt;
+	int tmp_mask;
+	int cur_bb_spur;
+	bool is2GHz = IS_CHAN_2GHZ(chan);
+
+	memset(&mask_m, 0, sizeof(int8_t) * 123);
+	memset(&mask_p, 0, sizeof(int8_t) * 123);
+
+	for (i = 0; i < AR_EEPROM_MODAL_SPURS; i++) {
+		cur_bb_spur = ath9k_hw_eeprom_get_spur_chan(ah, i, is2GHz);
+		if (AR_NO_SPUR == cur_bb_spur)
+			break;
+		cur_bb_spur = cur_bb_spur - (chan->channel * 10);
+		if ((cur_bb_spur > -95) && (cur_bb_spur < 95)) {
+			bb_spur = cur_bb_spur;
+			break;
+		}
+	}
+
+	if (AR_NO_SPUR == bb_spur)
+		return;
+
+	bin = bb_spur * 32;
+
+	tmp = REG_READ(ah, AR_PHY_TIMING_CTRL4(0));
+	new = tmp | (AR_PHY_TIMING_CTRL4_ENABLE_SPUR_RSSI |
+		     AR_PHY_TIMING_CTRL4_ENABLE_SPUR_FILTER |
+		     AR_PHY_TIMING_CTRL4_ENABLE_CHAN_MASK |
+		     AR_PHY_TIMING_CTRL4_ENABLE_PILOT_MASK);
+
+	REG_WRITE(ah, AR_PHY_TIMING_CTRL4(0), new);
+
+	new = (AR_PHY_SPUR_REG_MASK_RATE_CNTL |
+	       AR_PHY_SPUR_REG_ENABLE_MASK_PPM |
+	       AR_PHY_SPUR_REG_MASK_RATE_SELECT |
+	       AR_PHY_SPUR_REG_ENABLE_VIT_SPUR_RSSI |
+	       SM(SPUR_RSSI_THRESH, AR_PHY_SPUR_REG_SPUR_RSSI_THRESH));
+	REG_WRITE(ah, AR_PHY_SPUR_REG, new);
+
+	spur_delta_phase = ((bb_spur * 524288) / 100) &
+		AR_PHY_TIMING11_SPUR_DELTA_PHASE;
+
+	denominator = IS_CHAN_2GHZ(chan) ? 440 : 400;
+	spur_freq_sd = ((bb_spur * 2048) / denominator) & 0x3ff;
+
+	new = (AR_PHY_TIMING11_USE_SPUR_IN_AGC |
+	       SM(spur_freq_sd, AR_PHY_TIMING11_SPUR_FREQ_SD) |
+	       SM(spur_delta_phase, AR_PHY_TIMING11_SPUR_DELTA_PHASE));
+	REG_WRITE(ah, AR_PHY_TIMING11, new);
+
+	cur_bin = -6000;
+	upper = bin + 100;
+	lower = bin - 100;
+
+	for (i = 0; i < 4; i++) {
+		int pilot_mask = 0;
+		int chan_mask = 0;
+		int bp = 0;
+		for (bp = 0; bp < 30; bp++) {
+			if ((cur_bin > lower) && (cur_bin < upper)) {
+				pilot_mask = pilot_mask | 0x1 << bp;
+				chan_mask = chan_mask | 0x1 << bp;
+			}
+			cur_bin += 100;
+		}
+		cur_bin += inc[i];
+		REG_WRITE(ah, pilot_mask_reg[i], pilot_mask);
+		REG_WRITE(ah, chan_mask_reg[i], chan_mask);
+	}
+
+	cur_vit_mask = 6100;
+	upper = bin + 120;
+	lower = bin - 120;
+
+	for (i = 0; i < 123; i++) {
+		if ((cur_vit_mask > lower) && (cur_vit_mask < upper)) {
+
+			/* workaround for gcc bug #37014 */
+			volatile int tmp = abs(cur_vit_mask - bin);
+
+			if (tmp < 75)
+				mask_amt = 1;
+			else
+				mask_amt = 0;
+			if (cur_vit_mask < 0)
+				mask_m[abs(cur_vit_mask / 100)] = mask_amt;
+			else
+				mask_p[cur_vit_mask / 100] = mask_amt;
+		}
+		cur_vit_mask -= 100;
+	}
+
+	tmp_mask = (mask_m[46] << 30) | (mask_m[47] << 28)
+		| (mask_m[48] << 26) | (mask_m[49] << 24)
+		| (mask_m[50] << 22) | (mask_m[51] << 20)
+		| (mask_m[52] << 18) | (mask_m[53] << 16)
+		| (mask_m[54] << 14) | (mask_m[55] << 12)
+		| (mask_m[56] << 10) | (mask_m[57] << 8)
+		| (mask_m[58] << 6) | (mask_m[59] << 4)
+		| (mask_m[60] << 2) | (mask_m[61] << 0);
+	REG_WRITE(ah, AR_PHY_BIN_MASK_1, tmp_mask);
+	REG_WRITE(ah, AR_PHY_VIT_MASK2_M_46_61, tmp_mask);
+
+	tmp_mask = (mask_m[31] << 28)
+		| (mask_m[32] << 26) | (mask_m[33] << 24)
+		| (mask_m[34] << 22) | (mask_m[35] << 20)
+		| (mask_m[36] << 18) | (mask_m[37] << 16)
+		| (mask_m[48] << 14) | (mask_m[39] << 12)
+		| (mask_m[40] << 10) | (mask_m[41] << 8)
+		| (mask_m[42] << 6) | (mask_m[43] << 4)
+		| (mask_m[44] << 2) | (mask_m[45] << 0);
+	REG_WRITE(ah, AR_PHY_BIN_MASK_2, tmp_mask);
+	REG_WRITE(ah, AR_PHY_MASK2_M_31_45, tmp_mask);
+
+	tmp_mask = (mask_m[16] << 30) | (mask_m[16] << 28)
+		| (mask_m[18] << 26) | (mask_m[18] << 24)
+		| (mask_m[20] << 22) | (mask_m[20] << 20)
+		| (mask_m[22] << 18) | (mask_m[22] << 16)
+		| (mask_m[24] << 14) | (mask_m[24] << 12)
+		| (mask_m[25] << 10) | (mask_m[26] << 8)
+		| (mask_m[27] << 6) | (mask_m[28] << 4)
+		| (mask_m[29] << 2) | (mask_m[30] << 0);
+	REG_WRITE(ah, AR_PHY_BIN_MASK_3, tmp_mask);
+	REG_WRITE(ah, AR_PHY_MASK2_M_16_30, tmp_mask);
+
+	tmp_mask = (mask_m[0] << 30) | (mask_m[1] << 28)
+		| (mask_m[2] << 26) | (mask_m[3] << 24)
+		| (mask_m[4] << 22) | (mask_m[5] << 20)
+		| (mask_m[6] << 18) | (mask_m[7] << 16)
+		| (mask_m[8] << 14) | (mask_m[9] << 12)
+		| (mask_m[10] << 10) | (mask_m[11] << 8)
+		| (mask_m[12] << 6) | (mask_m[13] << 4)
+		| (mask_m[14] << 2) | (mask_m[15] << 0);
+	REG_WRITE(ah, AR_PHY_MASK_CTL, tmp_mask);
+	REG_WRITE(ah, AR_PHY_MASK2_M_00_15, tmp_mask);
+
+	tmp_mask = (mask_p[15] << 28)
+		| (mask_p[14] << 26) | (mask_p[13] << 24)
+		| (mask_p[12] << 22) | (mask_p[11] << 20)
+		| (mask_p[10] << 18) | (mask_p[9] << 16)
+		| (mask_p[8] << 14) | (mask_p[7] << 12)
+		| (mask_p[6] << 10) | (mask_p[5] << 8)
+		| (mask_p[4] << 6) | (mask_p[3] << 4)
+		| (mask_p[2] << 2) | (mask_p[1] << 0);
+	REG_WRITE(ah, AR_PHY_BIN_MASK2_1, tmp_mask);
+	REG_WRITE(ah, AR_PHY_MASK2_P_15_01, tmp_mask);
+
+	tmp_mask = (mask_p[30] << 28)
+		| (mask_p[29] << 26) | (mask_p[28] << 24)
+		| (mask_p[27] << 22) | (mask_p[26] << 20)
+		| (mask_p[25] << 18) | (mask_p[24] << 16)
+		| (mask_p[23] << 14) | (mask_p[22] << 12)
+		| (mask_p[21] << 10) | (mask_p[20] << 8)
+		| (mask_p[19] << 6) | (mask_p[18] << 4)
+		| (mask_p[17] << 2) | (mask_p[16] << 0);
+	REG_WRITE(ah, AR_PHY_BIN_MASK2_2, tmp_mask);
+	REG_WRITE(ah, AR_PHY_MASK2_P_30_16, tmp_mask);
+
+	tmp_mask = (mask_p[45] << 28)
+		| (mask_p[44] << 26) | (mask_p[43] << 24)
+		| (mask_p[42] << 22) | (mask_p[41] << 20)
+		| (mask_p[40] << 18) | (mask_p[39] << 16)
+		| (mask_p[38] << 14) | (mask_p[37] << 12)
+		| (mask_p[36] << 10) | (mask_p[35] << 8)
+		| (mask_p[34] << 6) | (mask_p[33] << 4)
+		| (mask_p[32] << 2) | (mask_p[31] << 0);
+	REG_WRITE(ah, AR_PHY_BIN_MASK2_3, tmp_mask);
+	REG_WRITE(ah, AR_PHY_MASK2_P_45_31, tmp_mask);
+
+	tmp_mask = (mask_p[61] << 30) | (mask_p[60] << 28)
+		| (mask_p[59] << 26) | (mask_p[58] << 24)
+		| (mask_p[57] << 22) | (mask_p[56] << 20)
+		| (mask_p[55] << 18) | (mask_p[54] << 16)
+		| (mask_p[53] << 14) | (mask_p[52] << 12)
+		| (mask_p[51] << 10) | (mask_p[50] << 8)
+		| (mask_p[49] << 6) | (mask_p[48] << 4)
+		| (mask_p[47] << 2) | (mask_p[46] << 0);
+	REG_WRITE(ah, AR_PHY_BIN_MASK2_4, tmp_mask);
+	REG_WRITE(ah, AR_PHY_MASK2_P_61_45, tmp_mask);
+}
+
+static inline void ath9k_hw_init_chain_masks(struct ath_hal *ah)
+{
+	struct ath_hal_5416 *ahp = AH5416(ah);
+	int rx_chainmask, tx_chainmask;
+
+	rx_chainmask = ahp->ah_rxchainmask;
+	tx_chainmask = ahp->ah_txchainmask;
+
+	switch (rx_chainmask) {
+	case 0x5:
+		REG_SET_BIT(ah, AR_PHY_ANALOG_SWAP,
+			    AR_PHY_SWAP_ALT_CHAIN);
+	case 0x3:
+		if (((ah)->ah_macVersion <= AR_SREV_VERSION_9160)) {
+			REG_WRITE(ah, AR_PHY_RX_CHAINMASK, 0x7);
+			REG_WRITE(ah, AR_PHY_CAL_CHAINMASK, 0x7);
+			break;
+		}
+	case 0x1:
+	case 0x2:
+		if (!AR_SREV_9280(ah))
+			break;
+	case 0x7:
+		REG_WRITE(ah, AR_PHY_RX_CHAINMASK, rx_chainmask);
+		REG_WRITE(ah, AR_PHY_CAL_CHAINMASK, rx_chainmask);
+		break;
+	default:
+		break;
+	}
+
+	REG_WRITE(ah, AR_SELFGEN_MASK, tx_chainmask);
+	if (tx_chainmask == 0x5) {
+		REG_SET_BIT(ah, AR_PHY_ANALOG_SWAP,
+			    AR_PHY_SWAP_ALT_CHAIN);
+	}
+	if (AR_SREV_9100(ah))
+		REG_WRITE(ah, AR_PHY_ANALOG_SWAP,
+			  REG_READ(ah, AR_PHY_ANALOG_SWAP) | 0x00000001);
+}
+
+static void ath9k_hw_set_addac(struct ath_hal *ah,
+			       struct ath9k_channel *chan)
+{
+	struct modal_eep_header *pModal;
+	struct ath_hal_5416 *ahp = AH5416(ah);
+	struct ar5416_eeprom *eep = &ahp->ah_eeprom;
+	u8 biaslevel;
+
+	if (ah->ah_macVersion != AR_SREV_VERSION_9160)
+		return;
+
+	if (ar5416_get_eep_rev(ahp) < AR5416_EEP_MINOR_VER_7)
+		return;
+
+	pModal = &(eep->modalHeader[IS_CHAN_2GHZ(chan)]);
+
+	if (pModal->xpaBiasLvl != 0xff) {
+		biaslevel = pModal->xpaBiasLvl;
+	} else {
+
+		u16 resetFreqBin, freqBin, freqCount = 0;
+		struct chan_centers centers;
+
+		ath9k_hw_get_channel_centers(ah, chan, &centers);
+
+		resetFreqBin =
+			FREQ2FBIN(centers.synth_center, IS_CHAN_2GHZ(chan));
+		freqBin = pModal->xpaBiasLvlFreq[0] & 0xff;
+		biaslevel = (u8) (pModal->xpaBiasLvlFreq[0] >> 14);
+
+		freqCount++;
+
+		while (freqCount < 3) {
+			if (pModal->xpaBiasLvlFreq[freqCount] == 0x0)
+				break;
+
+			freqBin = pModal->xpaBiasLvlFreq[freqCount] & 0xff;
+			if (resetFreqBin >= freqBin) {
+				biaslevel =
+					(u8) (pModal->
+						    xpaBiasLvlFreq[freqCount]
+						    >> 14);
+			} else {
+				break;
+			}
+			freqCount++;
+		}
+	}
+
+	if (IS_CHAN_2GHZ(chan)) {
+		INI_RA(&ahp->ah_iniAddac, 7, 1) =
+			(INI_RA(&ahp->ah_iniAddac, 7, 1) & (~0x18)) | biaslevel
+			<< 3;
+	} else {
+		INI_RA(&ahp->ah_iniAddac, 6, 1) =
+			(INI_RA(&ahp->ah_iniAddac, 6, 1) & (~0xc0)) | biaslevel
+			<< 6;
+	}
+}
+
+static u32 ath9k_hw_mac_usec(struct ath_hal *ah, u32 clks)
+{
+	if (ah->ah_curchan != NULL)
+		return clks /
+		CLOCK_RATE[ath9k_hw_chan2wmode(ah, ah->ah_curchan)];
+	else
+		return clks / CLOCK_RATE[ATH9K_MODE_11B];
+}
+
+static u32 ath9k_hw_mac_to_usec(struct ath_hal *ah, u32 clks)
+{
+	struct ath9k_channel *chan = ah->ah_curchan;
+
+	if (chan && IS_CHAN_HT40(chan))
+		return ath9k_hw_mac_usec(ah, clks) / 2;
+	else
+		return ath9k_hw_mac_usec(ah, clks);
+}
+
+static u32 ath9k_hw_mac_clks(struct ath_hal *ah, u32 usecs)
+{
+	if (ah->ah_curchan != NULL)
+		return usecs * CLOCK_RATE[ath9k_hw_chan2wmode(ah,
+			ah->ah_curchan)];
+	else
+		return usecs * CLOCK_RATE[ATH9K_MODE_11B];
+}
+
+static u32 ath9k_hw_mac_to_clks(struct ath_hal *ah, u32 usecs)
+{
+	struct ath9k_channel *chan = ah->ah_curchan;
+
+	if (chan && IS_CHAN_HT40(chan))
+		return ath9k_hw_mac_clks(ah, usecs) * 2;
+	else
+		return ath9k_hw_mac_clks(ah, usecs);
+}
+
+static bool ath9k_hw_set_ack_timeout(struct ath_hal *ah, u32 us)
+{
+	struct ath_hal_5416 *ahp = AH5416(ah);
+
+	if (us > ath9k_hw_mac_to_usec(ah, MS(0xffffffff, AR_TIME_OUT_ACK))) {
+		DPRINTF(ah->ah_sc, ATH_DBG_RESET, "%s: bad ack timeout %u\n",
+			 __func__, us);
+		ahp->ah_acktimeout = (u32) -1;
+		return false;
+	} else {
+		REG_RMW_FIELD(ah, AR_TIME_OUT,
+			      AR_TIME_OUT_ACK, ath9k_hw_mac_to_clks(ah, us));
+		ahp->ah_acktimeout = us;
+		return true;
+	}
+}
+
+static bool ath9k_hw_set_cts_timeout(struct ath_hal *ah, u32 us)
+{
+	struct ath_hal_5416 *ahp = AH5416(ah);
+
+	if (us > ath9k_hw_mac_to_usec(ah, MS(0xffffffff, AR_TIME_OUT_CTS))) {
+		DPRINTF(ah->ah_sc, ATH_DBG_RESET, "%s: bad cts timeout %u\n",
+			 __func__, us);
+		ahp->ah_ctstimeout = (u32) -1;
+		return false;
+	} else {
+		REG_RMW_FIELD(ah, AR_TIME_OUT,
+			      AR_TIME_OUT_CTS, ath9k_hw_mac_to_clks(ah, us));
+		ahp->ah_ctstimeout = us;
+		return true;
+	}
+}
+static bool ath9k_hw_set_global_txtimeout(struct ath_hal *ah,
+					  u32 tu)
+{
+	struct ath_hal_5416 *ahp = AH5416(ah);
+
+	if (tu > 0xFFFF) {
+		DPRINTF(ah->ah_sc, ATH_DBG_XMIT,
+			"%s: bad global tx timeout %u\n", __func__, tu);
+		ahp->ah_globaltxtimeout = (u32) -1;
+		return false;
+	} else {
+		REG_RMW_FIELD(ah, AR_GTXTO, AR_GTXTO_TIMEOUT_LIMIT, tu);
+		ahp->ah_globaltxtimeout = tu;
+		return true;
+	}
+}
+
+bool ath9k_hw_setslottime(struct ath_hal *ah, u32 us)
+{
+	struct ath_hal_5416 *ahp = AH5416(ah);
+
+	if (us < ATH9K_SLOT_TIME_9 || us > ath9k_hw_mac_to_usec(ah, 0xffff)) {
+		DPRINTF(ah->ah_sc, ATH_DBG_RESET, "%s: bad slot time %u\n",
+			 __func__, us);
+		ahp->ah_slottime = (u32) -1;
+		return false;
+	} else {
+		REG_WRITE(ah, AR_D_GBL_IFS_SLOT, ath9k_hw_mac_to_clks(ah, us));
+		ahp->ah_slottime = us;
+		return true;
+	}
+}
+
+static inline void ath9k_hw_init_user_settings(struct ath_hal *ah)
+{
+	struct ath_hal_5416 *ahp = AH5416(ah);
+
+	DPRINTF(ah->ah_sc, ATH_DBG_RESET, "--AP %s ahp->ah_miscMode 0x%x\n",
+		 __func__, ahp->ah_miscMode);
+	if (ahp->ah_miscMode != 0)
+		REG_WRITE(ah, AR_PCU_MISC,
+			  REG_READ(ah, AR_PCU_MISC) | ahp->ah_miscMode);
+	if (ahp->ah_slottime != (u32) -1)
+		ath9k_hw_setslottime(ah, ahp->ah_slottime);
+	if (ahp->ah_acktimeout != (u32) -1)
+		ath9k_hw_set_ack_timeout(ah, ahp->ah_acktimeout);
+	if (ahp->ah_ctstimeout != (u32) -1)
+		ath9k_hw_set_cts_timeout(ah, ahp->ah_ctstimeout);
+	if (ahp->ah_globaltxtimeout != (u32) -1)
+		ath9k_hw_set_global_txtimeout(ah, ahp->ah_globaltxtimeout);
+}
+
+static inline int
+ath9k_hw_process_ini(struct ath_hal *ah,
+		     struct ath9k_channel *chan,
+		     enum ath9k_ht_macmode macmode)
+{
+	int i, regWrites = 0;
+	struct ath_hal_5416 *ahp = AH5416(ah);
+	u32 modesIndex, freqIndex;
+	int status;
+
+	switch (chan->chanmode) {
+	case CHANNEL_A:
+	case CHANNEL_A_HT20:
+		modesIndex = 1;
+		freqIndex = 1;
+		break;
+	case CHANNEL_A_HT40PLUS:
+	case CHANNEL_A_HT40MINUS:
+		modesIndex = 2;
+		freqIndex = 1;
+		break;
+	case CHANNEL_G:
+	case CHANNEL_G_HT20:
+	case CHANNEL_B:
+		modesIndex = 4;
+		freqIndex = 2;
+		break;
+	case CHANNEL_G_HT40PLUS:
+	case CHANNEL_G_HT40MINUS:
+		modesIndex = 3;
+		freqIndex = 2;
+		break;
+
+	default:
+		return -EINVAL;
+	}
+
+	REG_WRITE(ah, AR_PHY(0), 0x00000007);
+
+	REG_WRITE(ah, AR_PHY_ADC_SERIAL_CTL, AR_PHY_SEL_EXTERNAL_RADIO);
+
+	ath9k_hw_set_addac(ah, chan);
+
+	if (AR_SREV_5416_V22_OR_LATER(ah)) {
+		REG_WRITE_ARRAY(&ahp->ah_iniAddac, 1, regWrites);
+	} else {
+		struct ar5416IniArray temp;
+		u32 addacSize =
+			sizeof(u32) * ahp->ah_iniAddac.ia_rows *
+			ahp->ah_iniAddac.ia_columns;
+
+		memcpy(ahp->ah_addac5416_21,
+		       ahp->ah_iniAddac.ia_array, addacSize);
+
+		(ahp->ah_addac5416_21)[31 *
+				       ahp->ah_iniAddac.ia_columns + 1] = 0;
+
+		temp.ia_array = ahp->ah_addac5416_21;
+		temp.ia_columns = ahp->ah_iniAddac.ia_columns;
+		temp.ia_rows = ahp->ah_iniAddac.ia_rows;
+		REG_WRITE_ARRAY(&temp, 1, regWrites);
+	}
+	REG_WRITE(ah, AR_PHY_ADC_SERIAL_CTL, AR_PHY_SEL_INTERNAL_ADDAC);
+
+	for (i = 0; i < ahp->ah_iniModes.ia_rows; i++) {
+		u32 reg = INI_RA(&ahp->ah_iniModes, i, 0);
+		u32 val = INI_RA(&ahp->ah_iniModes, i, modesIndex);
+
+#ifdef CONFIG_SLOW_ANT_DIV
+		if (ah->ah_devid == AR9280_DEVID_PCI)
+			val = ath9k_hw_ini_fixup(ah, &ahp->ah_eeprom, reg,
+						 val);
+#endif
+
+		REG_WRITE(ah, reg, val);
+
+		if (reg >= 0x7800 && reg < 0x78a0
+		    && ah->ah_config.analog_shiftreg) {
+			udelay(100);
+		}
+
+		DO_DELAY(regWrites);
+	}
+
+	for (i = 0; i < ahp->ah_iniCommon.ia_rows; i++) {
+		u32 reg = INI_RA(&ahp->ah_iniCommon, i, 0);
+		u32 val = INI_RA(&ahp->ah_iniCommon, i, 1);
+
+		REG_WRITE(ah, reg, val);
+
+		if (reg >= 0x7800 && reg < 0x78a0
+		    && ah->ah_config.analog_shiftreg) {
+			udelay(100);
+		}
+
+		DO_DELAY(regWrites);
+	}
+
+	ath9k_hw_write_regs(ah, modesIndex, freqIndex, regWrites);
+
+	if (AR_SREV_9280_20(ah) && IS_CHAN_A_5MHZ_SPACED(chan)) {
+		REG_WRITE_ARRAY(&ahp->ah_iniModesAdditional, modesIndex,
+				regWrites);
+	}
+
+	ath9k_hw_override_ini(ah, chan);
+	ath9k_hw_set_regs(ah, chan, macmode);
+	ath9k_hw_init_chain_masks(ah);
+
+	status = ath9k_hw_set_txpower(ah, &ahp->ah_eeprom, chan,
+				      ath9k_regd_get_ctl(ah, chan),
+				      ath9k_regd_get_antenna_allowed(ah,
+								     chan),
+				      chan->maxRegTxPower * 2,
+				      min((u32) MAX_RATE_POWER,
+					  (u32) ah->ah_powerLimit));
+	if (status != 0) {
+		DPRINTF(ah->ah_sc, ATH_DBG_POWER_MGMT,
+			 "%s: error init'ing transmit power\n", __func__);
+		return -EIO;
+	}
+
+	if (!ath9k_hw_set_rf_regs(ah, chan, freqIndex)) {
+		DPRINTF(ah->ah_sc, ATH_DBG_REG_IO,
+			 "%s: ar5416SetRfRegs failed\n", __func__);
+		return -EIO;
+	}
+
+	return 0;
+}
+
+static inline void ath9k_hw_setup_calibration(struct ath_hal *ah,
+					      struct hal_cal_list *currCal)
+{
+	REG_RMW_FIELD(ah, AR_PHY_TIMING_CTRL4(0),
+		      AR_PHY_TIMING_CTRL4_IQCAL_LOG_COUNT_MAX,
+		      currCal->calData->calCountMax);
+
+	switch (currCal->calData->calType) {
+	case IQ_MISMATCH_CAL:
+		REG_WRITE(ah, AR_PHY_CALMODE, AR_PHY_CALMODE_IQ);
+		DPRINTF(ah->ah_sc, ATH_DBG_CALIBRATE,
+			 "%s: starting IQ Mismatch Calibration\n",
+			 __func__);
+		break;
+	case ADC_GAIN_CAL:
+		REG_WRITE(ah, AR_PHY_CALMODE, AR_PHY_CALMODE_ADC_GAIN);
+		DPRINTF(ah->ah_sc, ATH_DBG_CALIBRATE,
+			 "%s: starting ADC Gain Calibration\n", __func__);
+		break;
+	case ADC_DC_CAL:
+		REG_WRITE(ah, AR_PHY_CALMODE, AR_PHY_CALMODE_ADC_DC_PER);
+		DPRINTF(ah->ah_sc, ATH_DBG_CALIBRATE,
+			 "%s: starting ADC DC Calibration\n", __func__);
+		break;
+	case ADC_DC_INIT_CAL:
+		REG_WRITE(ah, AR_PHY_CALMODE, AR_PHY_CALMODE_ADC_DC_INIT);
+		DPRINTF(ah->ah_sc, ATH_DBG_CALIBRATE,
+			 "%s: starting Init ADC DC Calibration\n",
+			 __func__);
+		break;
+	}
+
+	REG_SET_BIT(ah, AR_PHY_TIMING_CTRL4(0),
+		    AR_PHY_TIMING_CTRL4_DO_CAL);
+}
+
+static inline void ath9k_hw_reset_calibration(struct ath_hal *ah,
+					      struct hal_cal_list *currCal)
+{
+	struct ath_hal_5416 *ahp = AH5416(ah);
+	int i;
+
+	ath9k_hw_setup_calibration(ah, currCal);
+
+	currCal->calState = CAL_RUNNING;
+
+	for (i = 0; i < AR5416_MAX_CHAINS; i++) {
+		ahp->ah_Meas0.sign[i] = 0;
+		ahp->ah_Meas1.sign[i] = 0;
+		ahp->ah_Meas2.sign[i] = 0;
+		ahp->ah_Meas3.sign[i] = 0;
+	}
+
+	ahp->ah_CalSamples = 0;
+}
+
+static inline void
+ath9k_hw_per_calibration(struct ath_hal *ah,
+			 struct ath9k_channel *ichan,
+			 u8 rxchainmask,
+			 struct hal_cal_list *currCal,
+			 bool *isCalDone)
+{
+	struct ath_hal_5416 *ahp = AH5416(ah);
+
+	*isCalDone = false;
+
+	if (currCal->calState == CAL_RUNNING) {
+		if (!(REG_READ(ah,
+			       AR_PHY_TIMING_CTRL4(0)) &
+		      AR_PHY_TIMING_CTRL4_DO_CAL)) {
+
+			currCal->calData->calCollect(ah);
+
+			ahp->ah_CalSamples++;
+
+			if (ahp->ah_CalSamples >=
+			    currCal->calData->calNumSamples) {
+				int i, numChains = 0;
+				for (i = 0; i < AR5416_MAX_CHAINS; i++) {
+					if (rxchainmask & (1 << i))
+						numChains++;
+				}
+
+				currCal->calData->calPostProc(ah,
+							      numChains);
+
+				ichan->CalValid |=
+					currCal->calData->calType;
+				currCal->calState = CAL_DONE;
+				*isCalDone = true;
+			} else {
+				ath9k_hw_setup_calibration(ah, currCal);
+			}
+		}
+	} else if (!(ichan->CalValid & currCal->calData->calType)) {
+		ath9k_hw_reset_calibration(ah, currCal);
+	}
+}
+
+static inline bool ath9k_hw_run_init_cals(struct ath_hal *ah,
+					  int init_cal_count)
+{
+	struct ath_hal_5416 *ahp = AH5416(ah);
+	struct ath9k_channel ichan;
+	bool isCalDone;
+	struct hal_cal_list *currCal = ahp->ah_cal_list_curr;
+	const struct hal_percal_data *calData = currCal->calData;
+	int i;
+
+	if (currCal == NULL)
+		return false;
+
+	ichan.CalValid = 0;
+
+	for (i = 0; i < init_cal_count; i++) {
+		ath9k_hw_reset_calibration(ah, currCal);
+
+		if (!ath9k_hw_wait(ah, AR_PHY_TIMING_CTRL4(0),
+				   AR_PHY_TIMING_CTRL4_DO_CAL, 0)) {
+			DPRINTF(ah->ah_sc, ATH_DBG_CALIBRATE,
+				 "%s: Cal %d failed to complete in 100ms.\n",
+				 __func__, calData->calType);
+
+			ahp->ah_cal_list = ahp->ah_cal_list_last =
+				ahp->ah_cal_list_curr = NULL;
+			return false;
+		}
+
+		ath9k_hw_per_calibration(ah, &ichan, ahp->ah_rxchainmask,
+					 currCal, &isCalDone);
+		if (!isCalDone) {
+			DPRINTF(ah->ah_sc, ATH_DBG_CALIBRATE,
+				 "%s: Not able to run Init Cal %d.\n",
+				 __func__, calData->calType);
+		}
+		if (currCal->calNext) {
+			currCal = currCal->calNext;
+			calData = currCal->calData;
+		}
+	}
+
+	ahp->ah_cal_list = ahp->ah_cal_list_last = ahp->ah_cal_list_curr = NULL;
+	return true;
+}
+
+static inline bool
+ath9k_hw_channel_change(struct ath_hal *ah,
+			struct ath9k_channel *chan,
+			enum ath9k_ht_macmode macmode)
+{
+	u32 synthDelay, qnum;
+	struct ath_hal_5416 *ahp = AH5416(ah);
+
+	for (qnum = 0; qnum < AR_NUM_QCU; qnum++) {
+		if (ath9k_hw_numtxpending(ah, qnum)) {
+			DPRINTF(ah->ah_sc, ATH_DBG_QUEUE,
+				 "%s: Transmit frames pending on queue %d\n",
+				 __func__, qnum);
+			return false;
+		}
+	}
+
+	REG_WRITE(ah, AR_PHY_RFBUS_REQ, AR_PHY_RFBUS_REQ_EN);
+	if (!ath9k_hw_wait(ah, AR_PHY_RFBUS_GRANT, AR_PHY_RFBUS_GRANT_EN,
+			   AR_PHY_RFBUS_GRANT_EN)) {
+		DPRINTF(ah->ah_sc, ATH_DBG_PHY_IO,
+			 "%s: Could not kill baseband RX\n", __func__);
+		return false;
+	}
+
+	ath9k_hw_set_regs(ah, chan, macmode);
+
+	if (AR_SREV_9280_10_OR_LATER(ah)) {
+		if (!(ath9k_hw_ar9280_set_channel(ah, chan))) {
+			DPRINTF(ah->ah_sc, ATH_DBG_CHANNEL,
+				 "%s: failed to set channel\n", __func__);
+			return false;
+		}
+	} else {
+		if (!(ath9k_hw_set_channel(ah, chan))) {
+			DPRINTF(ah->ah_sc, ATH_DBG_CHANNEL,
+				 "%s: failed to set channel\n", __func__);
+			return false;
+		}
+	}
+
+	if (ath9k_hw_set_txpower(ah, &ahp->ah_eeprom, chan,
+				 ath9k_regd_get_ctl(ah, chan),
+				 ath9k_regd_get_antenna_allowed(ah, chan),
+				 chan->maxRegTxPower * 2,
+				 min((u32) MAX_RATE_POWER,
+				     (u32) ah->ah_powerLimit)) != 0) {
+		DPRINTF(ah->ah_sc, ATH_DBG_EEPROM,
+			 "%s: error init'ing transmit power\n", __func__);
+		return false;
+	}
+
+	synthDelay = REG_READ(ah, AR_PHY_RX_DELAY) & AR_PHY_RX_DELAY_DELAY;
+	if (IS_CHAN_CCK(chan))
+		synthDelay = (4 * synthDelay) / 22;
+	else
+		synthDelay /= 10;
+
+	udelay(synthDelay + BASE_ACTIVATE_DELAY);
+
+	REG_WRITE(ah, AR_PHY_RFBUS_REQ, 0);
+
+	if (IS_CHAN_OFDM(chan) || IS_CHAN_HT(chan))
+		ath9k_hw_set_delta_slope(ah, chan);
+
+	if (AR_SREV_9280_10_OR_LATER(ah))
+		ath9k_hw_9280_spur_mitigate(ah, chan);
+	else
+		ath9k_hw_spur_mitigate(ah, chan);
+
+	if (!chan->oneTimeCalsDone)
+		chan->oneTimeCalsDone = true;
+
+	return true;
+}
+
+static bool ath9k_hw_chip_reset(struct ath_hal *ah,
+				struct ath9k_channel *chan)
+{
+	struct ath_hal_5416 *ahp = AH5416(ah);
+
+	if (!ath9k_hw_set_reset_reg(ah, ATH9K_RESET_WARM))
+		return false;
+
+	if (!ath9k_hw_setpower(ah, ATH9K_PM_AWAKE))
+		return false;
+
+	ahp->ah_chipFullSleep = false;
+
+	ath9k_hw_init_pll(ah, chan);
+
+	ath9k_hw_set_rfmode(ah, chan);
+
+	return true;
+}
+
+static inline void ath9k_hw_set_dma(struct ath_hal *ah)
+{
+	u32 regval;
+
+	regval = REG_READ(ah, AR_AHB_MODE);
+	REG_WRITE(ah, AR_AHB_MODE, regval | AR_AHB_PREFETCH_RD_EN);
+
+	regval = REG_READ(ah, AR_TXCFG) & ~AR_TXCFG_DMASZ_MASK;
+	REG_WRITE(ah, AR_TXCFG, regval | AR_TXCFG_DMASZ_128B);
+
+	REG_RMW_FIELD(ah, AR_TXCFG, AR_FTRIG, ah->ah_txTrigLevel);
+
+	regval = REG_READ(ah, AR_RXCFG) & ~AR_RXCFG_DMASZ_MASK;
+	REG_WRITE(ah, AR_RXCFG, regval | AR_RXCFG_DMASZ_128B);
+
+	REG_WRITE(ah, AR_RXFIFO_CFG, 0x200);
+
+	if (AR_SREV_9285(ah)) {
+		REG_WRITE(ah, AR_PCU_TXBUF_CTRL,
+			  AR_9285_PCU_TXBUF_CTRL_USABLE_SIZE);
+	} else {
+		REG_WRITE(ah, AR_PCU_TXBUF_CTRL,
+			  AR_PCU_TXBUF_CTRL_USABLE_SIZE);
+	}
+}
+
+bool ath9k_hw_stopdmarecv(struct ath_hal *ah)
+{
+	REG_WRITE(ah, AR_CR, AR_CR_RXD);
+	if (!ath9k_hw_wait(ah, AR_CR, AR_CR_RXE, 0)) {
+		DPRINTF(ah->ah_sc, ATH_DBG_QUEUE,
+			"%s: dma failed to stop in 10ms\n"
+			"AR_CR=0x%08x\nAR_DIAG_SW=0x%08x\n",
+			__func__,
+			REG_READ(ah, AR_CR), REG_READ(ah, AR_DIAG_SW));
+		return false;
+	} else {
+		return true;
+	}
+}
+
+void ath9k_hw_startpcureceive(struct ath_hal *ah)
+{
+	REG_CLR_BIT(ah, AR_DIAG_SW,
+		    (AR_DIAG_RX_DIS | AR_DIAG_RX_ABORT));
+
+	ath9k_enable_mib_counters(ah);
+
+	ath9k_ani_reset(ah);
+}
+
+void ath9k_hw_stoppcurecv(struct ath_hal *ah)
+{
+	REG_SET_BIT(ah, AR_DIAG_SW, AR_DIAG_RX_DIS);
+
+	ath9k_hw_disable_mib_counters(ah);
+}
+
+static bool ath9k_hw_iscal_supported(struct ath_hal *ah,
+				     struct ath9k_channel *chan,
+				     enum hal_cal_types calType)
+{
+	struct ath_hal_5416 *ahp = AH5416(ah);
+	bool retval = false;
+
+	switch (calType & ahp->ah_suppCals) {
+	case IQ_MISMATCH_CAL:
+		if (!IS_CHAN_B(chan))
+			retval = true;
+		break;
+	case ADC_GAIN_CAL:
+	case ADC_DC_CAL:
+		if (!IS_CHAN_B(chan)
+		    && !(IS_CHAN_2GHZ(chan) && IS_CHAN_HT20(chan)))
+			retval = true;
+		break;
+	}
+
+	return retval;
+}
+
+static inline bool ath9k_hw_init_cal(struct ath_hal *ah,
+				     struct ath9k_channel *chan)
+{
+	struct ath_hal_5416 *ahp = AH5416(ah);
+	struct ath9k_channel *ichan =
+		ath9k_regd_check_channel(ah, chan);
+
+	REG_WRITE(ah, AR_PHY_AGC_CONTROL,
+		  REG_READ(ah, AR_PHY_AGC_CONTROL) |
+		  AR_PHY_AGC_CONTROL_CAL);
+
+	if (!ath9k_hw_wait
+	    (ah, AR_PHY_AGC_CONTROL, AR_PHY_AGC_CONTROL_CAL, 0)) {
+		DPRINTF(ah->ah_sc, ATH_DBG_CALIBRATE,
+			 "%s: offset calibration failed to complete in 1ms; "
+			 "noisy environment?\n", __func__);
+		return false;
+	}
+
+	REG_WRITE(ah, AR_PHY_AGC_CONTROL,
+		  REG_READ(ah, AR_PHY_AGC_CONTROL) |
+		  AR_PHY_AGC_CONTROL_NF);
+
+	ahp->ah_cal_list = ahp->ah_cal_list_last = ahp->ah_cal_list_curr =
+		NULL;
+
+	if (AR_SREV_9100(ah) || AR_SREV_9160_10_OR_LATER(ah)) {
+		if (ath9k_hw_iscal_supported(ah, chan, ADC_GAIN_CAL)) {
+			INIT_CAL(&ahp->ah_adcGainCalData);
+			INSERT_CAL(ahp, &ahp->ah_adcGainCalData);
+			DPRINTF(ah->ah_sc, ATH_DBG_CALIBRATE,
+				 "%s: enabling ADC Gain Calibration.\n",
+				 __func__);
+		}
+		if (ath9k_hw_iscal_supported(ah, chan, ADC_DC_CAL)) {
+			INIT_CAL(&ahp->ah_adcDcCalData);
+			INSERT_CAL(ahp, &ahp->ah_adcDcCalData);
+			DPRINTF(ah->ah_sc, ATH_DBG_CALIBRATE,
+				 "%s: enabling ADC DC Calibration.\n",
+				 __func__);
+		}
+		if (ath9k_hw_iscal_supported(ah, chan, IQ_MISMATCH_CAL)) {
+			INIT_CAL(&ahp->ah_iqCalData);
+			INSERT_CAL(ahp, &ahp->ah_iqCalData);
+			DPRINTF(ah->ah_sc, ATH_DBG_CALIBRATE,
+				 "%s: enabling IQ Calibration.\n",
+				 __func__);
+		}
+
+		ahp->ah_cal_list_curr = ahp->ah_cal_list;
+
+		if (ahp->ah_cal_list_curr)
+			ath9k_hw_reset_calibration(ah,
+						   ahp->ah_cal_list_curr);
+	}
+
+	ichan->CalValid = 0;
+
+	return true;
+}
+
+
+bool ath9k_hw_reset(struct ath_hal *ah, enum ath9k_opmode opmode,
+		    struct ath9k_channel *chan,
+		    enum ath9k_ht_macmode macmode,
+		    u8 txchainmask, u8 rxchainmask,
+		    enum ath9k_ht_extprotspacing extprotspacing,
+		    bool bChannelChange,
+		    int *status)
+{
+#define FAIL(_code)     do { ecode = _code; goto bad; } while (0)
+	u32 saveLedState;
+	struct ath_hal_5416 *ahp = AH5416(ah);
+	struct ath9k_channel *curchan = ah->ah_curchan;
+	u32 saveDefAntenna;
+	u32 macStaId1;
+	int ecode;
+	int i, rx_chainmask;
+
+	ahp->ah_extprotspacing = extprotspacing;
+	ahp->ah_txchainmask = txchainmask;
+	ahp->ah_rxchainmask = rxchainmask;
+
+	if (AR_SREV_9280(ah)) {
+		ahp->ah_txchainmask &= 0x3;
+		ahp->ah_rxchainmask &= 0x3;
+	}
+
+	if (ath9k_hw_check_chan(ah, chan) == NULL) {
+		DPRINTF(ah->ah_sc, ATH_DBG_CHANNEL,
+			 "%s: invalid channel %u/0x%x; no mapping\n",
+			 __func__, chan->channel, chan->channelFlags);
+		FAIL(-EINVAL);
+	}
+
+	if (!ath9k_hw_setpower(ah, ATH9K_PM_AWAKE))
+		return false;
+
+	if (curchan)
+		ath9k_hw_getnf(ah, curchan);
+
+	if (bChannelChange &&
+	    (ahp->ah_chipFullSleep != true) &&
+	    (ah->ah_curchan != NULL) &&
+	    (chan->channel != ah->ah_curchan->channel) &&
+	    ((chan->channelFlags & CHANNEL_ALL) ==
+	     (ah->ah_curchan->channelFlags & CHANNEL_ALL)) &&
+	    (!AR_SREV_9280(ah) || (!IS_CHAN_A_5MHZ_SPACED(chan) &&
+				   !IS_CHAN_A_5MHZ_SPACED(ah->
+							  ah_curchan)))) {
+
+		if (ath9k_hw_channel_change(ah, chan, macmode)) {
+			ath9k_hw_loadnf(ah, ah->ah_curchan);
+			ath9k_hw_start_nfcal(ah);
+			return true;
+		}
+	}
+
+	saveDefAntenna = REG_READ(ah, AR_DEF_ANTENNA);
+	if (saveDefAntenna == 0)
+		saveDefAntenna = 1;
+
+	macStaId1 = REG_READ(ah, AR_STA_ID1) & AR_STA_ID1_BASE_RATE_11B;
+
+	saveLedState = REG_READ(ah, AR_CFG_LED) &
+		(AR_CFG_LED_ASSOC_CTL | AR_CFG_LED_MODE_SEL |
+		 AR_CFG_LED_BLINK_THRESH_SEL | AR_CFG_LED_BLINK_SLOW);
+
+	ath9k_hw_mark_phy_inactive(ah);
+
+	if (!ath9k_hw_chip_reset(ah, chan)) {
+		DPRINTF(ah->ah_sc, ATH_DBG_RESET, "%s: chip reset failed\n",
+			 __func__);
+		FAIL(-EIO);
+	}
+
+	if (AR_SREV_9280(ah)) {
+		REG_SET_BIT(ah, AR_GPIO_INPUT_EN_VAL,
+			    AR_GPIO_JTAG_DISABLE);
+
+		if (test_bit(ATH9K_MODE_11A, ah->ah_caps.wireless_modes)) {
+			if (IS_CHAN_5GHZ(chan))
+				ath9k_hw_set_gpio(ah, 9, 0);
+			else
+				ath9k_hw_set_gpio(ah, 9, 1);
+		}
+		ath9k_hw_cfg_output(ah, 9, ATH9K_GPIO_OUTPUT_MUX_AS_OUTPUT);
+	}
+
+	ecode = ath9k_hw_process_ini(ah, chan, macmode);
+	if (ecode != 0)
+		goto bad;
+
+	if (IS_CHAN_OFDM(chan) || IS_CHAN_HT(chan))
+		ath9k_hw_set_delta_slope(ah, chan);
+
+	if (AR_SREV_9280_10_OR_LATER(ah))
+		ath9k_hw_9280_spur_mitigate(ah, chan);
+	else
+		ath9k_hw_spur_mitigate(ah, chan);
+
+	if (!ath9k_hw_eeprom_set_board_values(ah, chan)) {
+		DPRINTF(ah->ah_sc, ATH_DBG_EEPROM,
+			 "%s: error setting board options\n", __func__);
+		FAIL(-EIO);
+	}
+
+	ath9k_hw_decrease_chain_power(ah, chan);
+
+	REG_WRITE(ah, AR_STA_ID0, get_unaligned_le32(ahp->ah_macaddr));
+	REG_WRITE(ah, AR_STA_ID1, get_unaligned_le16(ahp->ah_macaddr + 4)
+		  | macStaId1
+		  | AR_STA_ID1_RTS_USE_DEF
+		  | (ah->ah_config.
+		     ack_6mb ? AR_STA_ID1_ACKCTS_6MB : 0)
+		  | ahp->ah_staId1Defaults);
+	ath9k_hw_set_operating_mode(ah, opmode);
+
+	REG_WRITE(ah, AR_BSSMSKL, get_unaligned_le32(ahp->ah_bssidmask));
+	REG_WRITE(ah, AR_BSSMSKU, get_unaligned_le16(ahp->ah_bssidmask + 4));
+
+	REG_WRITE(ah, AR_DEF_ANTENNA, saveDefAntenna);
+
+	REG_WRITE(ah, AR_BSS_ID0, get_unaligned_le32(ahp->ah_bssid));
+	REG_WRITE(ah, AR_BSS_ID1, get_unaligned_le16(ahp->ah_bssid + 4) |
+		  ((ahp->ah_assocId & 0x3fff) << AR_BSS_ID1_AID_S));
+
+	REG_WRITE(ah, AR_ISR, ~0);
+
+	REG_WRITE(ah, AR_RSSI_THR, INIT_RSSI_THR);
+
+	if (AR_SREV_9280_10_OR_LATER(ah)) {
+		if (!(ath9k_hw_ar9280_set_channel(ah, chan)))
+			FAIL(-EIO);
+	} else {
+		if (!(ath9k_hw_set_channel(ah, chan)))
+			FAIL(-EIO);
+	}
+
+	for (i = 0; i < AR_NUM_DCU; i++)
+		REG_WRITE(ah, AR_DQCUMASK(i), 1 << i);
+
+	ahp->ah_intrTxqs = 0;
+	for (i = 0; i < ah->ah_caps.total_queues; i++)
+		ath9k_hw_resettxqueue(ah, i);
+
+	ath9k_hw_init_interrupt_masks(ah, opmode);
+	ath9k_hw_init_qos(ah);
+
+	ath9k_hw_init_user_settings(ah);
+
+	ah->ah_opmode = opmode;
+
+	REG_WRITE(ah, AR_STA_ID1,
+		  REG_READ(ah, AR_STA_ID1) | AR_STA_ID1_PRESERVE_SEQNUM);
+
+	ath9k_hw_set_dma(ah);
+
+	REG_WRITE(ah, AR_OBS, 8);
+
+	if (ahp->ah_intrMitigation) {
+
+		REG_RMW_FIELD(ah, AR_RIMT, AR_RIMT_LAST, 500);
+		REG_RMW_FIELD(ah, AR_RIMT, AR_RIMT_FIRST, 2000);
+	}
+
+	ath9k_hw_init_bb(ah, chan);
+
+	if (!ath9k_hw_init_cal(ah, chan))
+		FAIL(-ENODEV);
+
+	rx_chainmask = ahp->ah_rxchainmask;
+	if ((rx_chainmask == 0x5) || (rx_chainmask == 0x3)) {
+		REG_WRITE(ah, AR_PHY_RX_CHAINMASK, rx_chainmask);
+		REG_WRITE(ah, AR_PHY_CAL_CHAINMASK, rx_chainmask);
+	}
+
+	REG_WRITE(ah, AR_CFG_LED, saveLedState | AR_CFG_SCLK_32KHZ);
+
+	if (AR_SREV_9100(ah)) {
+		u32 mask;
+		mask = REG_READ(ah, AR_CFG);
+		if (mask & (AR_CFG_SWRB | AR_CFG_SWTB | AR_CFG_SWRG)) {
+			DPRINTF(ah->ah_sc, ATH_DBG_RESET,
+				 "%s CFG Byte Swap Set 0x%x\n", __func__,
+				 mask);
+		} else {
+			mask =
+				INIT_CONFIG_STATUS | AR_CFG_SWRB | AR_CFG_SWTB;
+			REG_WRITE(ah, AR_CFG, mask);
+			DPRINTF(ah->ah_sc, ATH_DBG_RESET,
+				 "%s Setting CFG 0x%x\n", __func__,
+				 REG_READ(ah, AR_CFG));
+		}
+	} else {
+#ifdef __BIG_ENDIAN
+		REG_WRITE(ah, AR_CFG, AR_CFG_SWTD | AR_CFG_SWRD);
+#endif
+	}
+
+	return true;
+bad:
+	if (status)
+		*status = ecode;
+	return false;
+#undef FAIL
+}
+
+bool ath9k_hw_phy_disable(struct ath_hal *ah)
+{
+	return ath9k_hw_set_reset_reg(ah, ATH9K_RESET_WARM);
+}
+
+bool ath9k_hw_disable(struct ath_hal *ah)
+{
+	if (!ath9k_hw_setpower(ah, ATH9K_PM_AWAKE))
+		return false;
+
+	return ath9k_hw_set_reset_reg(ah, ATH9K_RESET_COLD);
+}
+
+bool
+ath9k_hw_calibrate(struct ath_hal *ah, struct ath9k_channel *chan,
+		   u8 rxchainmask, bool longcal,
+		   bool *isCalDone)
+{
+	struct ath_hal_5416 *ahp = AH5416(ah);
+	struct hal_cal_list *currCal = ahp->ah_cal_list_curr;
+	struct ath9k_channel *ichan =
+		ath9k_regd_check_channel(ah, chan);
+
+	*isCalDone = true;
+
+	if (ichan == NULL) {
+		DPRINTF(ah->ah_sc, ATH_DBG_CHANNEL,
+			 "%s: invalid channel %u/0x%x; no mapping\n",
+			 __func__, chan->channel, chan->channelFlags);
+		return false;
+	}
+
+	if (currCal &&
+	    (currCal->calState == CAL_RUNNING ||
+	     currCal->calState == CAL_WAITING)) {
+		ath9k_hw_per_calibration(ah, ichan, rxchainmask, currCal,
+					 isCalDone);
+		if (*isCalDone) {
+			ahp->ah_cal_list_curr = currCal = currCal->calNext;
+
+			if (currCal->calState == CAL_WAITING) {
+				*isCalDone = false;
+				ath9k_hw_reset_calibration(ah, currCal);
+			}
+		}
+	}
+
+	if (longcal) {
+		ath9k_hw_getnf(ah, ichan);
+		ath9k_hw_loadnf(ah, ah->ah_curchan);
+		ath9k_hw_start_nfcal(ah);
+
+		if ((ichan->channelFlags & CHANNEL_CW_INT) != 0) {
+
+			chan->channelFlags |= CHANNEL_CW_INT;
+			ichan->channelFlags &= ~CHANNEL_CW_INT;
+		}
+	}
+
+	return true;
+}
+
+static void ath9k_hw_iqcal_collect(struct ath_hal *ah)
+{
+	struct ath_hal_5416 *ahp = AH5416(ah);
+	int i;
+
+	for (i = 0; i < AR5416_MAX_CHAINS; i++) {
+		ahp->ah_totalPowerMeasI[i] +=
+			REG_READ(ah, AR_PHY_CAL_MEAS_0(i));
+		ahp->ah_totalPowerMeasQ[i] +=
+			REG_READ(ah, AR_PHY_CAL_MEAS_1(i));
+		ahp->ah_totalIqCorrMeas[i] +=
+			(int32_t) REG_READ(ah, AR_PHY_CAL_MEAS_2(i));
+		DPRINTF(ah->ah_sc, ATH_DBG_CALIBRATE,
+			 "%d: Chn %d pmi=0x%08x;pmq=0x%08x;iqcm=0x%08x;\n",
+			 ahp->ah_CalSamples, i, ahp->ah_totalPowerMeasI[i],
+			 ahp->ah_totalPowerMeasQ[i],
+			 ahp->ah_totalIqCorrMeas[i]);
+	}
+}
+
+static void ath9k_hw_adc_gaincal_collect(struct ath_hal *ah)
+{
+	struct ath_hal_5416 *ahp = AH5416(ah);
+	int i;
+
+	for (i = 0; i < AR5416_MAX_CHAINS; i++) {
+		ahp->ah_totalAdcIOddPhase[i] +=
+			REG_READ(ah, AR_PHY_CAL_MEAS_0(i));
+		ahp->ah_totalAdcIEvenPhase[i] +=
+			REG_READ(ah, AR_PHY_CAL_MEAS_1(i));
+		ahp->ah_totalAdcQOddPhase[i] +=
+			REG_READ(ah, AR_PHY_CAL_MEAS_2(i));
+		ahp->ah_totalAdcQEvenPhase[i] +=
+			REG_READ(ah, AR_PHY_CAL_MEAS_3(i));
+
+		DPRINTF(ah->ah_sc, ATH_DBG_CALIBRATE,
+			"%d: Chn %d oddi=0x%08x; eveni=0x%08x; "
+			"oddq=0x%08x; evenq=0x%08x;\n",
+			 ahp->ah_CalSamples, i,
+			 ahp->ah_totalAdcIOddPhase[i],
+			 ahp->ah_totalAdcIEvenPhase[i],
+			 ahp->ah_totalAdcQOddPhase[i],
+			 ahp->ah_totalAdcQEvenPhase[i]);
+	}
+}
+
+static void ath9k_hw_adc_dccal_collect(struct ath_hal *ah)
+{
+	struct ath_hal_5416 *ahp = AH5416(ah);
+	int i;
+
+	for (i = 0; i < AR5416_MAX_CHAINS; i++) {
+		ahp->ah_totalAdcDcOffsetIOddPhase[i] +=
+			(int32_t) REG_READ(ah, AR_PHY_CAL_MEAS_0(i));
+		ahp->ah_totalAdcDcOffsetIEvenPhase[i] +=
+			(int32_t) REG_READ(ah, AR_PHY_CAL_MEAS_1(i));
+		ahp->ah_totalAdcDcOffsetQOddPhase[i] +=
+			(int32_t) REG_READ(ah, AR_PHY_CAL_MEAS_2(i));
+		ahp->ah_totalAdcDcOffsetQEvenPhase[i] +=
+			(int32_t) REG_READ(ah, AR_PHY_CAL_MEAS_3(i));
+
+		DPRINTF(ah->ah_sc, ATH_DBG_CALIBRATE,
+			"%d: Chn %d oddi=0x%08x; eveni=0x%08x; "
+			"oddq=0x%08x; evenq=0x%08x;\n",
+			 ahp->ah_CalSamples, i,
+			 ahp->ah_totalAdcDcOffsetIOddPhase[i],
+			 ahp->ah_totalAdcDcOffsetIEvenPhase[i],
+			 ahp->ah_totalAdcDcOffsetQOddPhase[i],
+			 ahp->ah_totalAdcDcOffsetQEvenPhase[i]);
+	}
+}
+
+static void ath9k_hw_iqcalibrate(struct ath_hal *ah, u8 numChains)
+{
+	struct ath_hal_5416 *ahp = AH5416(ah);
+	u32 powerMeasQ, powerMeasI, iqCorrMeas;
+	u32 qCoffDenom, iCoffDenom;
+	int32_t qCoff, iCoff;
+	int iqCorrNeg, i;
+
+	for (i = 0; i < numChains; i++) {
+		powerMeasI = ahp->ah_totalPowerMeasI[i];
+		powerMeasQ = ahp->ah_totalPowerMeasQ[i];
+		iqCorrMeas = ahp->ah_totalIqCorrMeas[i];
+
+		DPRINTF(ah->ah_sc, ATH_DBG_CALIBRATE,
+			 "Starting IQ Cal and Correction for Chain %d\n",
+			 i);
+
+		DPRINTF(ah->ah_sc, ATH_DBG_CALIBRATE,
+			 "Orignal: Chn %diq_corr_meas = 0x%08x\n",
+			 i, ahp->ah_totalIqCorrMeas[i]);
+
+		iqCorrNeg = 0;
+
+
+		if (iqCorrMeas > 0x80000000) {
+			iqCorrMeas = (0xffffffff - iqCorrMeas) + 1;
+			iqCorrNeg = 1;
+		}
+
+		DPRINTF(ah->ah_sc, ATH_DBG_CALIBRATE,
+			 "Chn %d pwr_meas_i = 0x%08x\n", i, powerMeasI);
+		DPRINTF(ah->ah_sc, ATH_DBG_CALIBRATE,
+			 "Chn %d pwr_meas_q = 0x%08x\n", i, powerMeasQ);
+		DPRINTF(ah->ah_sc, ATH_DBG_CALIBRATE, "iqCorrNeg is 0x%08x\n",
+			 iqCorrNeg);
+
+		iCoffDenom = (powerMeasI / 2 + powerMeasQ / 2) / 128;
+		qCoffDenom = powerMeasQ / 64;
+
+		if (powerMeasQ != 0) {
+
+			iCoff = iqCorrMeas / iCoffDenom;
+			qCoff = powerMeasI / qCoffDenom - 64;
+			DPRINTF(ah->ah_sc, ATH_DBG_CALIBRATE,
+				 "Chn %d iCoff = 0x%08x\n", i, iCoff);
+			DPRINTF(ah->ah_sc, ATH_DBG_CALIBRATE,
+				 "Chn %d qCoff = 0x%08x\n", i, qCoff);
+
+
+			iCoff = iCoff & 0x3f;
+			DPRINTF(ah->ah_sc, ATH_DBG_CALIBRATE,
+				 "New: Chn %d iCoff = 0x%08x\n", i, iCoff);
+			if (iqCorrNeg == 0x0)
+				iCoff = 0x40 - iCoff;
+
+			if (qCoff > 15)
+				qCoff = 15;
+			else if (qCoff <= -16)
+				qCoff = 16;
+
+			DPRINTF(ah->ah_sc, ATH_DBG_CALIBRATE,
+				 "Chn %d : iCoff = 0x%x  qCoff = 0x%x\n",
+				i, iCoff, qCoff);
+
+			REG_RMW_FIELD(ah, AR_PHY_TIMING_CTRL4(i),
+				      AR_PHY_TIMING_CTRL4_IQCORR_Q_I_COFF,
+				      iCoff);
+			REG_RMW_FIELD(ah, AR_PHY_TIMING_CTRL4(i),
+				      AR_PHY_TIMING_CTRL4_IQCORR_Q_Q_COFF,
+				      qCoff);
+			DPRINTF(ah->ah_sc, ATH_DBG_CALIBRATE,
+				"IQ Cal and Correction done for Chain %d\n",
+				i);
+		}
+	}
+
+	REG_SET_BIT(ah, AR_PHY_TIMING_CTRL4(0),
+		    AR_PHY_TIMING_CTRL4_IQCORR_ENABLE);
+}
+
+static void
+ath9k_hw_adc_gaincal_calibrate(struct ath_hal *ah, u8 numChains)
+{
+	struct ath_hal_5416 *ahp = AH5416(ah);
+	u32 iOddMeasOffset, iEvenMeasOffset, qOddMeasOffset,
+		qEvenMeasOffset;
+	u32 qGainMismatch, iGainMismatch, val, i;
+
+	for (i = 0; i < numChains; i++) {
+		iOddMeasOffset = ahp->ah_totalAdcIOddPhase[i];
+		iEvenMeasOffset = ahp->ah_totalAdcIEvenPhase[i];
+		qOddMeasOffset = ahp->ah_totalAdcQOddPhase[i];
+		qEvenMeasOffset = ahp->ah_totalAdcQEvenPhase[i];
+
+		DPRINTF(ah->ah_sc, ATH_DBG_CALIBRATE,
+			 "Starting ADC Gain Cal for Chain %d\n", i);
+
+		DPRINTF(ah->ah_sc, ATH_DBG_CALIBRATE,
+			 "Chn %d pwr_meas_odd_i = 0x%08x\n", i,
+			 iOddMeasOffset);
+		DPRINTF(ah->ah_sc, ATH_DBG_CALIBRATE,
+			 "Chn %d pwr_meas_even_i = 0x%08x\n", i,
+			 iEvenMeasOffset);
+		DPRINTF(ah->ah_sc, ATH_DBG_CALIBRATE,
+			 "Chn %d pwr_meas_odd_q = 0x%08x\n", i,
+			 qOddMeasOffset);
+		DPRINTF(ah->ah_sc, ATH_DBG_CALIBRATE,
+			 "Chn %d pwr_meas_even_q = 0x%08x\n", i,
+			 qEvenMeasOffset);
+
+		if (iOddMeasOffset != 0 && qEvenMeasOffset != 0) {
+			iGainMismatch =
+				((iEvenMeasOffset * 32) /
+				 iOddMeasOffset) & 0x3f;
+			qGainMismatch =
+				((qOddMeasOffset * 32) /
+				 qEvenMeasOffset) & 0x3f;
+
+			DPRINTF(ah->ah_sc, ATH_DBG_CALIBRATE,
+				 "Chn %d gain_mismatch_i = 0x%08x\n", i,
+				 iGainMismatch);
+			DPRINTF(ah->ah_sc, ATH_DBG_CALIBRATE,
+				 "Chn %d gain_mismatch_q = 0x%08x\n", i,
+				 qGainMismatch);
+
+			val = REG_READ(ah, AR_PHY_NEW_ADC_DC_GAIN_CORR(i));
+			val &= 0xfffff000;
+			val |= (qGainMismatch) | (iGainMismatch << 6);
+			REG_WRITE(ah, AR_PHY_NEW_ADC_DC_GAIN_CORR(i), val);
+
+			DPRINTF(ah->ah_sc, ATH_DBG_CALIBRATE,
+				 "ADC Gain Cal done for Chain %d\n", i);
+		}
+	}
+
+	REG_WRITE(ah, AR_PHY_NEW_ADC_DC_GAIN_CORR(0),
+		  REG_READ(ah, AR_PHY_NEW_ADC_DC_GAIN_CORR(0)) |
+		  AR_PHY_NEW_ADC_GAIN_CORR_ENABLE);
+}
+
+static void
+ath9k_hw_adc_dccal_calibrate(struct ath_hal *ah, u8 numChains)
+{
+	struct ath_hal_5416 *ahp = AH5416(ah);
+	u32 iOddMeasOffset, iEvenMeasOffset, val, i;
+	int32_t qOddMeasOffset, qEvenMeasOffset, qDcMismatch, iDcMismatch;
+	const struct hal_percal_data *calData =
+		ahp->ah_cal_list_curr->calData;
+	u32 numSamples =
+		(1 << (calData->calCountMax + 5)) * calData->calNumSamples;
+
+	for (i = 0; i < numChains; i++) {
+		iOddMeasOffset = ahp->ah_totalAdcDcOffsetIOddPhase[i];
+		iEvenMeasOffset = ahp->ah_totalAdcDcOffsetIEvenPhase[i];
+		qOddMeasOffset = ahp->ah_totalAdcDcOffsetQOddPhase[i];
+		qEvenMeasOffset = ahp->ah_totalAdcDcOffsetQEvenPhase[i];
+
+		DPRINTF(ah->ah_sc, ATH_DBG_CALIBRATE,
+			 "Starting ADC DC Offset Cal for Chain %d\n", i);
+
+		DPRINTF(ah->ah_sc, ATH_DBG_CALIBRATE,
+			 "Chn %d pwr_meas_odd_i = %d\n", i,
+			 iOddMeasOffset);
+		DPRINTF(ah->ah_sc, ATH_DBG_CALIBRATE,
+			 "Chn %d pwr_meas_even_i = %d\n", i,
+			 iEvenMeasOffset);
+		DPRINTF(ah->ah_sc, ATH_DBG_CALIBRATE,
+			 "Chn %d pwr_meas_odd_q = %d\n", i,
+			 qOddMeasOffset);
+		DPRINTF(ah->ah_sc, ATH_DBG_CALIBRATE,
+			 "Chn %d pwr_meas_even_q = %d\n", i,
+			 qEvenMeasOffset);
+
+		iDcMismatch = (((iEvenMeasOffset - iOddMeasOffset) * 2) /
+			       numSamples) & 0x1ff;
+		qDcMismatch = (((qOddMeasOffset - qEvenMeasOffset) * 2) /
+			       numSamples) & 0x1ff;
+
+		DPRINTF(ah->ah_sc, ATH_DBG_CALIBRATE,
+			 "Chn %d dc_offset_mismatch_i = 0x%08x\n", i,
+			 iDcMismatch);
+		DPRINTF(ah->ah_sc, ATH_DBG_CALIBRATE,
+			 "Chn %d dc_offset_mismatch_q = 0x%08x\n", i,
+			 qDcMismatch);
+
+		val = REG_READ(ah, AR_PHY_NEW_ADC_DC_GAIN_CORR(i));
+		val &= 0xc0000fff;
+		val |= (qDcMismatch << 12) | (iDcMismatch << 21);
+		REG_WRITE(ah, AR_PHY_NEW_ADC_DC_GAIN_CORR(i), val);
+
+		DPRINTF(ah->ah_sc, ATH_DBG_CALIBRATE,
+			 "ADC DC Offset Cal done for Chain %d\n", i);
+	}
+
+	REG_WRITE(ah, AR_PHY_NEW_ADC_DC_GAIN_CORR(0),
+		  REG_READ(ah, AR_PHY_NEW_ADC_DC_GAIN_CORR(0)) |
+		  AR_PHY_NEW_ADC_DC_OFFSET_CORR_ENABLE);
+}
+
+bool ath9k_hw_set_txpowerlimit(struct ath_hal *ah, u32 limit)
+{
+	struct ath_hal_5416 *ahp = AH5416(ah);
+	struct ath9k_channel *chan = ah->ah_curchan;
+
+	ah->ah_powerLimit = min(limit, (u32) MAX_RATE_POWER);
+
+	if (ath9k_hw_set_txpower(ah, &ahp->ah_eeprom, chan,
+				 ath9k_regd_get_ctl(ah, chan),
+				 ath9k_regd_get_antenna_allowed(ah,
+								chan),
+				 chan->maxRegTxPower * 2,
+				 min((u32) MAX_RATE_POWER,
+				     (u32) ah->ah_powerLimit)) != 0)
+		return false;
+
+	return true;
+}
+
+void
+ath9k_hw_get_channel_centers(struct ath_hal *ah,
+			     struct ath9k_channel *chan,
+			     struct chan_centers *centers)
+{
+	int8_t extoff;
+	struct ath_hal_5416 *ahp = AH5416(ah);
+
+	if (!IS_CHAN_HT40(chan)) {
+		centers->ctl_center = centers->ext_center =
+			centers->synth_center = chan->channel;
+		return;
+	}
+
+	if ((chan->chanmode == CHANNEL_A_HT40PLUS) ||
+	    (chan->chanmode == CHANNEL_G_HT40PLUS)) {
+		centers->synth_center =
+			chan->channel + HT40_CHANNEL_CENTER_SHIFT;
+		extoff = 1;
+	} else {
+		centers->synth_center =
+			chan->channel - HT40_CHANNEL_CENTER_SHIFT;
+		extoff = -1;
+	}
+
+	centers->ctl_center = centers->synth_center - (extoff *
+		HT40_CHANNEL_CENTER_SHIFT);
+	centers->ext_center = centers->synth_center + (extoff *
+		((ahp->
+		ah_extprotspacing
+		==
+		ATH9K_HT_EXTPROTSPACING_20)
+		?
+		HT40_CHANNEL_CENTER_SHIFT
+		: 15));
+
+}
+
+void
+ath9k_hw_reset_calvalid(struct ath_hal *ah, struct ath9k_channel *chan,
+			bool *isCalDone)
+{
+	struct ath_hal_5416 *ahp = AH5416(ah);
+	struct ath9k_channel *ichan =
+		ath9k_regd_check_channel(ah, chan);
+	struct hal_cal_list *currCal = ahp->ah_cal_list_curr;
+
+	*isCalDone = true;
+
+	if (!AR_SREV_9100(ah) && !AR_SREV_9160_10_OR_LATER(ah))
+		return;
+
+	if (currCal == NULL)
+		return;
+
+	if (ichan == NULL) {
+		DPRINTF(ah->ah_sc, ATH_DBG_CALIBRATE,
+			 "%s: invalid channel %u/0x%x; no mapping\n",
+			 __func__, chan->channel, chan->channelFlags);
+		return;
+	}
+
+
+	if (currCal->calState != CAL_DONE) {
+		DPRINTF(ah->ah_sc, ATH_DBG_CALIBRATE,
+			 "%s: Calibration state incorrect, %d\n",
+			 __func__, currCal->calState);
+		return;
+	}
+
+
+	if (!ath9k_hw_iscal_supported(ah, chan, currCal->calData->calType))
+		return;
+
+	DPRINTF(ah->ah_sc, ATH_DBG_CALIBRATE,
+		 "%s: Resetting Cal %d state for channel %u/0x%x\n",
+		 __func__, currCal->calData->calType, chan->channel,
+		 chan->channelFlags);
+
+	ichan->CalValid &= ~currCal->calData->calType;
+	currCal->calState = CAL_WAITING;
+
+	*isCalDone = false;
+}
+
+void ath9k_hw_getmac(struct ath_hal *ah, u8 *mac)
+{
+	struct ath_hal_5416 *ahp = AH5416(ah);
+
+	memcpy(mac, ahp->ah_macaddr, ETH_ALEN);
+}
+
+bool ath9k_hw_setmac(struct ath_hal *ah, const u8 *mac)
+{
+	struct ath_hal_5416 *ahp = AH5416(ah);
+
+	memcpy(ahp->ah_macaddr, mac, ETH_ALEN);
+	return true;
+}
+
+void ath9k_hw_getbssidmask(struct ath_hal *ah, u8 *mask)
+{
+	struct ath_hal_5416 *ahp = AH5416(ah);
+
+	memcpy(mask, ahp->ah_bssidmask, ETH_ALEN);
+}
+
+bool
+ath9k_hw_setbssidmask(struct ath_hal *ah, const u8 *mask)
+{
+	struct ath_hal_5416 *ahp = AH5416(ah);
+
+	memcpy(ahp->ah_bssidmask, mask, ETH_ALEN);
+
+	REG_WRITE(ah, AR_BSSMSKL, get_unaligned_le32(ahp->ah_bssidmask));
+	REG_WRITE(ah, AR_BSSMSKU, get_unaligned_le16(ahp->ah_bssidmask + 4));
+
+	return true;
+}
+
+#ifdef CONFIG_ATH9K_RFKILL
+static void ath9k_enable_rfkill(struct ath_hal *ah)
+{
+	struct ath_hal_5416 *ahp = AH5416(ah);
+
+	REG_SET_BIT(ah, AR_GPIO_INPUT_EN_VAL,
+		    AR_GPIO_INPUT_EN_VAL_RFSILENT_BB);
+
+	REG_CLR_BIT(ah, AR_GPIO_INPUT_MUX2,
+		    AR_GPIO_INPUT_MUX2_RFSILENT);
+
+	ath9k_hw_cfg_gpio_input(ah, ahp->ah_gpioSelect);
+	REG_SET_BIT(ah, AR_PHY_TEST, RFSILENT_BB);
+
+	if (ahp->ah_gpioBit == ath9k_hw_gpio_get(ah, ahp->ah_gpioSelect)) {
+
+		ath9k_hw_set_gpio_intr(ah, ahp->ah_gpioSelect,
+				       !ahp->ah_gpioBit);
+	} else {
+		ath9k_hw_set_gpio_intr(ah, ahp->ah_gpioSelect,
+				       ahp->ah_gpioBit);
+	}
+}
+#endif
+
+void
+ath9k_hw_write_associd(struct ath_hal *ah, const u8 *bssid,
+		       u16 assocId)
+{
+	struct ath_hal_5416 *ahp = AH5416(ah);
+
+	memcpy(ahp->ah_bssid, bssid, ETH_ALEN);
+	ahp->ah_assocId = assocId;
+
+	REG_WRITE(ah, AR_BSS_ID0, get_unaligned_le32(ahp->ah_bssid));
+	REG_WRITE(ah, AR_BSS_ID1, get_unaligned_le16(ahp->ah_bssid + 4) |
+		  ((assocId & 0x3fff) << AR_BSS_ID1_AID_S));
+}
+
+u64 ath9k_hw_gettsf64(struct ath_hal *ah)
+{
+	u64 tsf;
+
+	tsf = REG_READ(ah, AR_TSF_U32);
+	tsf = (tsf << 32) | REG_READ(ah, AR_TSF_L32);
+	return tsf;
+}
+
+void ath9k_hw_reset_tsf(struct ath_hal *ah)
+{
+	int count;
+
+	count = 0;
+	while (REG_READ(ah, AR_SLP32_MODE) & AR_SLP32_TSF_WRITE_STATUS) {
+		count++;
+		if (count > 10) {
+			DPRINTF(ah->ah_sc, ATH_DBG_RESET,
+			 "%s: AR_SLP32_TSF_WRITE_STATUS limit exceeded\n",
+				 __func__);
+			break;
+		}
+		udelay(10);
+	}
+	REG_WRITE(ah, AR_RESET_TSF, AR_RESET_TSF_ONCE);
+}
+
+u32 ath9k_hw_getdefantenna(struct ath_hal *ah)
+{
+	return REG_READ(ah, AR_DEF_ANTENNA) & 0x7;
+}
+
+void ath9k_hw_setantenna(struct ath_hal *ah, u32 antenna)
+{
+	REG_WRITE(ah, AR_DEF_ANTENNA, (antenna & 0x7));
+}
+
+bool
+ath9k_hw_setantennaswitch(struct ath_hal *ah,
+			  enum ath9k_ant_setting settings,
+			  struct ath9k_channel *chan,
+			  u8 *tx_chainmask,
+			  u8 *rx_chainmask,
+			  u8 *antenna_cfgd)
+{
+	struct ath_hal_5416 *ahp = AH5416(ah);
+	static u8 tx_chainmask_cfg, rx_chainmask_cfg;
+
+	if (AR_SREV_9280(ah)) {
+		if (!tx_chainmask_cfg) {
+
+			tx_chainmask_cfg = *tx_chainmask;
+			rx_chainmask_cfg = *rx_chainmask;
+		}
+
+		switch (settings) {
+		case ATH9K_ANT_FIXED_A:
+			*tx_chainmask = ATH9K_ANTENNA0_CHAINMASK;
+			*rx_chainmask = ATH9K_ANTENNA0_CHAINMASK;
+			*antenna_cfgd = true;
+			break;
+		case ATH9K_ANT_FIXED_B:
+			if (ah->ah_caps.tx_chainmask >
+			    ATH9K_ANTENNA1_CHAINMASK) {
+				*tx_chainmask = ATH9K_ANTENNA1_CHAINMASK;
+			}
+			*rx_chainmask = ATH9K_ANTENNA1_CHAINMASK;
+			*antenna_cfgd = true;
+			break;
+		case ATH9K_ANT_VARIABLE:
+			*tx_chainmask = tx_chainmask_cfg;
+			*rx_chainmask = rx_chainmask_cfg;
+			*antenna_cfgd = true;
+			break;
+		default:
+			break;
+		}
+	} else {
+		ahp->ah_diversityControl = settings;
+	}
+
+	return true;
+}
+
+void ath9k_hw_setopmode(struct ath_hal *ah)
+{
+	ath9k_hw_set_operating_mode(ah, ah->ah_opmode);
+}
+
+bool
+ath9k_hw_getcapability(struct ath_hal *ah, enum ath9k_capability_type type,
+		       u32 capability, u32 *result)
+{
+	struct ath_hal_5416 *ahp = AH5416(ah);
+	const struct ath9k_hw_capabilities *pCap = &ah->ah_caps;
+
+	switch (type) {
+	case ATH9K_CAP_CIPHER:
+		switch (capability) {
+		case ATH9K_CIPHER_AES_CCM:
+		case ATH9K_CIPHER_AES_OCB:
+		case ATH9K_CIPHER_TKIP:
+		case ATH9K_CIPHER_WEP:
+		case ATH9K_CIPHER_MIC:
+		case ATH9K_CIPHER_CLR:
+			return true;
+		default:
+			return false;
+		}
+	case ATH9K_CAP_TKIP_MIC:
+		switch (capability) {
+		case 0:
+			return true;
+		case 1:
+			return (ahp->ah_staId1Defaults &
+				AR_STA_ID1_CRPT_MIC_ENABLE) ? true :
+			false;
+		}
+	case ATH9K_CAP_TKIP_SPLIT:
+		return (ahp->ah_miscMode & AR_PCU_MIC_NEW_LOC_ENA) ?
+			false : true;
+	case ATH9K_CAP_WME_TKIPMIC:
+		return 0;
+	case ATH9K_CAP_PHYCOUNTERS:
+		return ahp->ah_hasHwPhyCounters ? 0 : -ENXIO;
+	case ATH9K_CAP_DIVERSITY:
+		return (REG_READ(ah, AR_PHY_CCK_DETECT) &
+			AR_PHY_CCK_DETECT_BB_ENABLE_ANT_FAST_DIV) ?
+			true : false;
+	case ATH9K_CAP_PHYDIAG:
+		return true;
+	case ATH9K_CAP_MCAST_KEYSRCH:
+		switch (capability) {
+		case 0:
+			return true;
+		case 1:
+			if (REG_READ(ah, AR_STA_ID1) & AR_STA_ID1_ADHOC) {
+				return false;
+			} else {
+				return (ahp->ah_staId1Defaults &
+					AR_STA_ID1_MCAST_KSRCH) ? true :
+					false;
+			}
+		}
+		return false;
+	case ATH9K_CAP_TSF_ADJUST:
+		return (ahp->ah_miscMode & AR_PCU_TX_ADD_TSF) ?
+			true : false;
+	case ATH9K_CAP_RFSILENT:
+		if (capability == 3)
+			return false;
+	case ATH9K_CAP_ANT_CFG_2GHZ:
+		*result = pCap->num_antcfg_2ghz;
+		return true;
+	case ATH9K_CAP_ANT_CFG_5GHZ:
+		*result = pCap->num_antcfg_5ghz;
+		return true;
+	case ATH9K_CAP_TXPOW:
+		switch (capability) {
+		case 0:
+			return 0;
+		case 1:
+			*result = ah->ah_powerLimit;
+			return 0;
+		case 2:
+			*result = ah->ah_maxPowerLevel;
+			return 0;
+		case 3:
+			*result = ah->ah_tpScale;
+			return 0;
+		}
+		return false;
+	default:
+		return false;
+	}
+}
+
+int
+ath9k_hw_select_antconfig(struct ath_hal *ah, u32 cfg)
+{
+	struct ath_hal_5416 *ahp = AH5416(ah);
+	struct ath9k_channel *chan = ah->ah_curchan;
+	const struct ath9k_hw_capabilities *pCap = &ah->ah_caps;
+	u16 ant_config;
+	u32 halNumAntConfig;
+
+	halNumAntConfig =
+		IS_CHAN_2GHZ(chan) ? pCap->num_antcfg_2ghz : pCap->
+		num_antcfg_5ghz;
+
+	if (cfg < halNumAntConfig) {
+		if (!ath9k_hw_get_eeprom_antenna_cfg(ahp, chan,
+						     cfg, &ant_config)) {
+			REG_WRITE(ah, AR_PHY_SWITCH_COM, ant_config);
+			return 0;
+		}
+	}
+
+	return -EINVAL;
+}
+
+bool ath9k_hw_intrpend(struct ath_hal *ah)
+{
+	u32 host_isr;
+
+	if (AR_SREV_9100(ah))
+		return true;
+
+	host_isr = REG_READ(ah, AR_INTR_ASYNC_CAUSE);
+	if ((host_isr & AR_INTR_MAC_IRQ) && (host_isr != AR_INTR_SPURIOUS))
+		return true;
+
+	host_isr = REG_READ(ah, AR_INTR_SYNC_CAUSE);
+	if ((host_isr & AR_INTR_SYNC_DEFAULT)
+	    && (host_isr != AR_INTR_SPURIOUS))
+		return true;
+
+	return false;
+}
+
+bool ath9k_hw_getisr(struct ath_hal *ah, enum ath9k_int *masked)
+{
+	u32 isr = 0;
+	u32 mask2 = 0;
+	struct ath9k_hw_capabilities *pCap = &ah->ah_caps;
+	u32 sync_cause = 0;
+	bool fatal_int = false;
+
+	if (!AR_SREV_9100(ah)) {
+		if (REG_READ(ah, AR_INTR_ASYNC_CAUSE) & AR_INTR_MAC_IRQ) {
+			if ((REG_READ(ah, AR_RTC_STATUS) & AR_RTC_STATUS_M)
+			    == AR_RTC_STATUS_ON) {
+				isr = REG_READ(ah, AR_ISR);
+			}
+		}
+
+		sync_cause =
+			REG_READ(ah,
+				 AR_INTR_SYNC_CAUSE) & AR_INTR_SYNC_DEFAULT;
+
+		*masked = 0;
+
+		if (!isr && !sync_cause)
+			return false;
+	} else {
+		*masked = 0;
+		isr = REG_READ(ah, AR_ISR);
+	}
+
+	if (isr) {
+		struct ath_hal_5416 *ahp = AH5416(ah);
+
+		if (isr & AR_ISR_BCNMISC) {
+			u32 isr2;
+			isr2 = REG_READ(ah, AR_ISR_S2);
+			if (isr2 & AR_ISR_S2_TIM)
+				mask2 |= ATH9K_INT_TIM;
+			if (isr2 & AR_ISR_S2_DTIM)
+				mask2 |= ATH9K_INT_DTIM;
+			if (isr2 & AR_ISR_S2_DTIMSYNC)
+				mask2 |= ATH9K_INT_DTIMSYNC;
+			if (isr2 & (AR_ISR_S2_CABEND))
+				mask2 |= ATH9K_INT_CABEND;
+			if (isr2 & AR_ISR_S2_GTT)
+				mask2 |= ATH9K_INT_GTT;
+			if (isr2 & AR_ISR_S2_CST)
+				mask2 |= ATH9K_INT_CST;
+		}
+
+		isr = REG_READ(ah, AR_ISR_RAC);
+		if (isr == 0xffffffff) {
+			*masked = 0;
+			return false;
+		}
+
+		*masked = isr & ATH9K_INT_COMMON;
+
+		if (ahp->ah_intrMitigation) {
+
+			if (isr & (AR_ISR_RXMINTR | AR_ISR_RXINTM))
+				*masked |= ATH9K_INT_RX;
+		}
+
+		if (isr & (AR_ISR_RXOK | AR_ISR_RXERR))
+			*masked |= ATH9K_INT_RX;
+		if (isr &
+		    (AR_ISR_TXOK | AR_ISR_TXDESC | AR_ISR_TXERR |
+		     AR_ISR_TXEOL)) {
+			u32 s0_s, s1_s;
+
+			*masked |= ATH9K_INT_TX;
+
+			s0_s = REG_READ(ah, AR_ISR_S0_S);
+			ahp->ah_intrTxqs |= MS(s0_s, AR_ISR_S0_QCU_TXOK);
+			ahp->ah_intrTxqs |= MS(s0_s, AR_ISR_S0_QCU_TXDESC);
+
+			s1_s = REG_READ(ah, AR_ISR_S1_S);
+			ahp->ah_intrTxqs |= MS(s1_s, AR_ISR_S1_QCU_TXERR);
+			ahp->ah_intrTxqs |= MS(s1_s, AR_ISR_S1_QCU_TXEOL);
+		}
+
+		if (isr & AR_ISR_RXORN) {
+			DPRINTF(ah->ah_sc, ATH_DBG_INTERRUPT,
+				 "%s: receive FIFO overrun interrupt\n",
+				 __func__);
+		}
+
+		if (!AR_SREV_9100(ah)) {
+			if (!(pCap->hw_caps & ATH9K_HW_CAP_AUTOSLEEP)) {
+				u32 isr5 = REG_READ(ah, AR_ISR_S5_S);
+				if (isr5 & AR_ISR_S5_TIM_TIMER)
+					*masked |= ATH9K_INT_TIM_TIMER;
+			}
+		}
+
+		*masked |= mask2;
+	}
+	if (AR_SREV_9100(ah))
+		return true;
+	if (sync_cause) {
+		fatal_int =
+			(sync_cause &
+			 (AR_INTR_SYNC_HOST1_FATAL | AR_INTR_SYNC_HOST1_PERR))
+			? true : false;
+
+		if (fatal_int) {
+			if (sync_cause & AR_INTR_SYNC_HOST1_FATAL) {
+				DPRINTF(ah->ah_sc, ATH_DBG_ANY,
+					 "%s: received PCI FATAL interrupt\n",
+					 __func__);
+			}
+			if (sync_cause & AR_INTR_SYNC_HOST1_PERR) {
+				DPRINTF(ah->ah_sc, ATH_DBG_ANY,
+					 "%s: received PCI PERR interrupt\n",
+					 __func__);
+			}
+		}
+		if (sync_cause & AR_INTR_SYNC_RADM_CPL_TIMEOUT) {
+			DPRINTF(ah->ah_sc, ATH_DBG_INTERRUPT,
+				 "%s: AR_INTR_SYNC_RADM_CPL_TIMEOUT\n",
+				 __func__);
+			REG_WRITE(ah, AR_RC, AR_RC_HOSTIF);
+			REG_WRITE(ah, AR_RC, 0);
+			*masked |= ATH9K_INT_FATAL;
+		}
+		if (sync_cause & AR_INTR_SYNC_LOCAL_TIMEOUT) {
+			DPRINTF(ah->ah_sc, ATH_DBG_INTERRUPT,
+				 "%s: AR_INTR_SYNC_LOCAL_TIMEOUT\n",
+				 __func__);
+		}
+
+		REG_WRITE(ah, AR_INTR_SYNC_CAUSE_CLR, sync_cause);
+		(void) REG_READ(ah, AR_INTR_SYNC_CAUSE_CLR);
+	}
+	return true;
+}
+
+enum ath9k_int ath9k_hw_intrget(struct ath_hal *ah)
+{
+	return AH5416(ah)->ah_maskReg;
+}
+
+enum ath9k_int ath9k_hw_set_interrupts(struct ath_hal *ah, enum ath9k_int ints)
+{
+	struct ath_hal_5416 *ahp = AH5416(ah);
+	u32 omask = ahp->ah_maskReg;
+	u32 mask, mask2;
+	struct ath9k_hw_capabilities *pCap = &ah->ah_caps;
+
+	DPRINTF(ah->ah_sc, ATH_DBG_INTERRUPT, "%s: 0x%x => 0x%x\n", __func__,
+		 omask, ints);
+
+	if (omask & ATH9K_INT_GLOBAL) {
+		DPRINTF(ah->ah_sc, ATH_DBG_INTERRUPT, "%s: disable IER\n",
+			 __func__);
+		REG_WRITE(ah, AR_IER, AR_IER_DISABLE);
+		(void) REG_READ(ah, AR_IER);
+		if (!AR_SREV_9100(ah)) {
+			REG_WRITE(ah, AR_INTR_ASYNC_ENABLE, 0);
+			(void) REG_READ(ah, AR_INTR_ASYNC_ENABLE);
+
+			REG_WRITE(ah, AR_INTR_SYNC_ENABLE, 0);
+			(void) REG_READ(ah, AR_INTR_SYNC_ENABLE);
+		}
+	}
+
+	mask = ints & ATH9K_INT_COMMON;
+	mask2 = 0;
+
+	if (ints & ATH9K_INT_TX) {
+		if (ahp->ah_txOkInterruptMask)
+			mask |= AR_IMR_TXOK;
+		if (ahp->ah_txDescInterruptMask)
+			mask |= AR_IMR_TXDESC;
+		if (ahp->ah_txErrInterruptMask)
+			mask |= AR_IMR_TXERR;
+		if (ahp->ah_txEolInterruptMask)
+			mask |= AR_IMR_TXEOL;
+	}
+	if (ints & ATH9K_INT_RX) {
+		mask |= AR_IMR_RXERR;
+		if (ahp->ah_intrMitigation)
+			mask |= AR_IMR_RXMINTR | AR_IMR_RXINTM;
+		else
+			mask |= AR_IMR_RXOK | AR_IMR_RXDESC;
+		if (!(pCap->hw_caps & ATH9K_HW_CAP_AUTOSLEEP))
+			mask |= AR_IMR_GENTMR;
+	}
+
+	if (ints & (ATH9K_INT_BMISC)) {
+		mask |= AR_IMR_BCNMISC;
+		if (ints & ATH9K_INT_TIM)
+			mask2 |= AR_IMR_S2_TIM;
+		if (ints & ATH9K_INT_DTIM)
+			mask2 |= AR_IMR_S2_DTIM;
+		if (ints & ATH9K_INT_DTIMSYNC)
+			mask2 |= AR_IMR_S2_DTIMSYNC;
+		if (ints & ATH9K_INT_CABEND)
+			mask2 |= (AR_IMR_S2_CABEND);
+	}
+
+	if (ints & (ATH9K_INT_GTT | ATH9K_INT_CST)) {
+		mask |= AR_IMR_BCNMISC;
+		if (ints & ATH9K_INT_GTT)
+			mask2 |= AR_IMR_S2_GTT;
+		if (ints & ATH9K_INT_CST)
+			mask2 |= AR_IMR_S2_CST;
+	}
+
+	DPRINTF(ah->ah_sc, ATH_DBG_INTERRUPT, "%s: new IMR 0x%x\n", __func__,
+		 mask);
+	REG_WRITE(ah, AR_IMR, mask);
+	mask = REG_READ(ah, AR_IMR_S2) & ~(AR_IMR_S2_TIM |
+					   AR_IMR_S2_DTIM |
+					   AR_IMR_S2_DTIMSYNC |
+					   AR_IMR_S2_CABEND |
+					   AR_IMR_S2_CABTO |
+					   AR_IMR_S2_TSFOOR |
+					   AR_IMR_S2_GTT | AR_IMR_S2_CST);
+	REG_WRITE(ah, AR_IMR_S2, mask | mask2);
+	ahp->ah_maskReg = ints;
+
+	if (!(pCap->hw_caps & ATH9K_HW_CAP_AUTOSLEEP)) {
+		if (ints & ATH9K_INT_TIM_TIMER)
+			REG_SET_BIT(ah, AR_IMR_S5, AR_IMR_S5_TIM_TIMER);
+		else
+			REG_CLR_BIT(ah, AR_IMR_S5, AR_IMR_S5_TIM_TIMER);
+	}
+
+	if (ints & ATH9K_INT_GLOBAL) {
+		DPRINTF(ah->ah_sc, ATH_DBG_INTERRUPT, "%s: enable IER\n",
+			 __func__);
+		REG_WRITE(ah, AR_IER, AR_IER_ENABLE);
+		if (!AR_SREV_9100(ah)) {
+			REG_WRITE(ah, AR_INTR_ASYNC_ENABLE,
+				  AR_INTR_MAC_IRQ);
+			REG_WRITE(ah, AR_INTR_ASYNC_MASK, AR_INTR_MAC_IRQ);
+
+
+			REG_WRITE(ah, AR_INTR_SYNC_ENABLE,
+				  AR_INTR_SYNC_DEFAULT);
+			REG_WRITE(ah, AR_INTR_SYNC_MASK,
+				  AR_INTR_SYNC_DEFAULT);
+		}
+		DPRINTF(ah->ah_sc, ATH_DBG_INTERRUPT, "AR_IMR 0x%x IER 0x%x\n",
+			 REG_READ(ah, AR_IMR), REG_READ(ah, AR_IER));
+	}
+
+	return omask;
+}
+
+void
+ath9k_hw_beaconinit(struct ath_hal *ah,
+		    u32 next_beacon, u32 beacon_period)
+{
+	struct ath_hal_5416 *ahp = AH5416(ah);
+	int flags = 0;
+
+	ahp->ah_beaconInterval = beacon_period;
+
+	switch (ah->ah_opmode) {
+	case ATH9K_M_STA:
+	case ATH9K_M_MONITOR:
+		REG_WRITE(ah, AR_NEXT_TBTT_TIMER, TU_TO_USEC(next_beacon));
+		REG_WRITE(ah, AR_NEXT_DMA_BEACON_ALERT, 0xffff);
+		REG_WRITE(ah, AR_NEXT_SWBA, 0x7ffff);
+		flags |= AR_TBTT_TIMER_EN;
+		break;
+	case ATH9K_M_IBSS:
+		REG_SET_BIT(ah, AR_TXCFG,
+			    AR_TXCFG_ADHOC_BEACON_ATIM_TX_POLICY);
+		REG_WRITE(ah, AR_NEXT_NDP_TIMER,
+			  TU_TO_USEC(next_beacon +
+				     (ahp->ah_atimWindow ? ahp->
+				      ah_atimWindow : 1)));
+		flags |= AR_NDP_TIMER_EN;
+	case ATH9K_M_HOSTAP:
+		REG_WRITE(ah, AR_NEXT_TBTT_TIMER, TU_TO_USEC(next_beacon));
+		REG_WRITE(ah, AR_NEXT_DMA_BEACON_ALERT,
+			  TU_TO_USEC(next_beacon -
+				     ah->ah_config.
+				     dma_beacon_response_time));
+		REG_WRITE(ah, AR_NEXT_SWBA,
+			  TU_TO_USEC(next_beacon -
+				     ah->ah_config.
+				     sw_beacon_response_time));
+		flags |=
+			AR_TBTT_TIMER_EN | AR_DBA_TIMER_EN | AR_SWBA_TIMER_EN;
+		break;
+	}
+
+	REG_WRITE(ah, AR_BEACON_PERIOD, TU_TO_USEC(beacon_period));
+	REG_WRITE(ah, AR_DMA_BEACON_PERIOD, TU_TO_USEC(beacon_period));
+	REG_WRITE(ah, AR_SWBA_PERIOD, TU_TO_USEC(beacon_period));
+	REG_WRITE(ah, AR_NDP_PERIOD, TU_TO_USEC(beacon_period));
+
+	beacon_period &= ~ATH9K_BEACON_ENA;
+	if (beacon_period & ATH9K_BEACON_RESET_TSF) {
+		beacon_period &= ~ATH9K_BEACON_RESET_TSF;
+		ath9k_hw_reset_tsf(ah);
+	}
+
+	REG_SET_BIT(ah, AR_TIMER_MODE, flags);
+}
+
+void
+ath9k_hw_set_sta_beacon_timers(struct ath_hal *ah,
+			       const struct ath9k_beacon_state *bs)
+{
+	u32 nextTbtt, beaconintval, dtimperiod, beacontimeout;
+	struct ath9k_hw_capabilities *pCap = &ah->ah_caps;
+
+	REG_WRITE(ah, AR_NEXT_TBTT_TIMER, TU_TO_USEC(bs->bs_nexttbtt));
+
+	REG_WRITE(ah, AR_BEACON_PERIOD,
+		  TU_TO_USEC(bs->bs_intval & ATH9K_BEACON_PERIOD));
+	REG_WRITE(ah, AR_DMA_BEACON_PERIOD,
+		  TU_TO_USEC(bs->bs_intval & ATH9K_BEACON_PERIOD));
+
+	REG_RMW_FIELD(ah, AR_RSSI_THR,
+		      AR_RSSI_THR_BM_THR, bs->bs_bmissthreshold);
+
+	beaconintval = bs->bs_intval & ATH9K_BEACON_PERIOD;
+
+	if (bs->bs_sleepduration > beaconintval)
+		beaconintval = bs->bs_sleepduration;
+
+	dtimperiod = bs->bs_dtimperiod;
+	if (bs->bs_sleepduration > dtimperiod)
+		dtimperiod = bs->bs_sleepduration;
+
+	if (beaconintval == dtimperiod)
+		nextTbtt = bs->bs_nextdtim;
+	else
+		nextTbtt = bs->bs_nexttbtt;
+
+	DPRINTF(ah->ah_sc, ATH_DBG_BEACON, "%s: next DTIM %d\n", __func__,
+		 bs->bs_nextdtim);
+	DPRINTF(ah->ah_sc, ATH_DBG_BEACON, "%s: next beacon %d\n", __func__,
+		 nextTbtt);
+	DPRINTF(ah->ah_sc, ATH_DBG_BEACON, "%s: beacon period %d\n", __func__,
+		 beaconintval);
+	DPRINTF(ah->ah_sc, ATH_DBG_BEACON, "%s: DTIM period %d\n", __func__,
+		 dtimperiod);
+
+	REG_WRITE(ah, AR_NEXT_DTIM,
+		  TU_TO_USEC(bs->bs_nextdtim - SLEEP_SLOP));
+	REG_WRITE(ah, AR_NEXT_TIM, TU_TO_USEC(nextTbtt - SLEEP_SLOP));
+
+	REG_WRITE(ah, AR_SLEEP1,
+		  SM((CAB_TIMEOUT_VAL << 3), AR_SLEEP1_CAB_TIMEOUT)
+		  | AR_SLEEP1_ASSUME_DTIM);
+
+	if (pCap->hw_caps & ATH9K_HW_CAP_AUTOSLEEP)
+		beacontimeout = (BEACON_TIMEOUT_VAL << 3);
+	else
+		beacontimeout = MIN_BEACON_TIMEOUT_VAL;
+
+	REG_WRITE(ah, AR_SLEEP2,
+		  SM(beacontimeout, AR_SLEEP2_BEACON_TIMEOUT));
+
+	REG_WRITE(ah, AR_TIM_PERIOD, TU_TO_USEC(beaconintval));
+	REG_WRITE(ah, AR_DTIM_PERIOD, TU_TO_USEC(dtimperiod));
+
+	REG_SET_BIT(ah, AR_TIMER_MODE,
+		    AR_TBTT_TIMER_EN | AR_TIM_TIMER_EN |
+		    AR_DTIM_TIMER_EN);
+
+}
+
+bool ath9k_hw_keyisvalid(struct ath_hal *ah, u16 entry)
+{
+	if (entry < ah->ah_caps.keycache_size) {
+		u32 val = REG_READ(ah, AR_KEYTABLE_MAC1(entry));
+		if (val & AR_KEYTABLE_VALID)
+			return true;
+	}
+	return false;
+}
+
+bool ath9k_hw_keyreset(struct ath_hal *ah, u16 entry)
+{
+	u32 keyType;
+
+	if (entry >= ah->ah_caps.keycache_size) {
+		DPRINTF(ah->ah_sc, ATH_DBG_KEYCACHE,
+			 "%s: entry %u out of range\n", __func__, entry);
+		return false;
+	}
+	keyType = REG_READ(ah, AR_KEYTABLE_TYPE(entry));
+
+	REG_WRITE(ah, AR_KEYTABLE_KEY0(entry), 0);
+	REG_WRITE(ah, AR_KEYTABLE_KEY1(entry), 0);
+	REG_WRITE(ah, AR_KEYTABLE_KEY2(entry), 0);
+	REG_WRITE(ah, AR_KEYTABLE_KEY3(entry), 0);
+	REG_WRITE(ah, AR_KEYTABLE_KEY4(entry), 0);
+	REG_WRITE(ah, AR_KEYTABLE_TYPE(entry), AR_KEYTABLE_TYPE_CLR);
+	REG_WRITE(ah, AR_KEYTABLE_MAC0(entry), 0);
+	REG_WRITE(ah, AR_KEYTABLE_MAC1(entry), 0);
+
+	if (keyType == AR_KEYTABLE_TYPE_TKIP && ATH9K_IS_MIC_ENABLED(ah)) {
+		u16 micentry = entry + 64;
+
+		REG_WRITE(ah, AR_KEYTABLE_KEY0(micentry), 0);
+		REG_WRITE(ah, AR_KEYTABLE_KEY1(micentry), 0);
+		REG_WRITE(ah, AR_KEYTABLE_KEY2(micentry), 0);
+		REG_WRITE(ah, AR_KEYTABLE_KEY3(micentry), 0);
+
+	}
+
+	if (ah->ah_curchan == NULL)
+		return true;
+
+	return true;
+}
+
+bool
+ath9k_hw_keysetmac(struct ath_hal *ah, u16 entry,
+		   const u8 *mac)
+{
+	u32 macHi, macLo;
+
+	if (entry >= ah->ah_caps.keycache_size) {
+		DPRINTF(ah->ah_sc, ATH_DBG_KEYCACHE,
+			 "%s: entry %u out of range\n", __func__, entry);
+		return false;
+	}
+
+	if (mac != NULL) {
+		macHi = (mac[5] << 8) | mac[4];
+		macLo = (mac[3] << 24) | (mac[2] << 16)
+			| (mac[1] << 8) | mac[0];
+		macLo >>= 1;
+		macLo |= (macHi & 1) << 31;
+		macHi >>= 1;
+	} else {
+		macLo = macHi = 0;
+	}
+	REG_WRITE(ah, AR_KEYTABLE_MAC0(entry), macLo);
+	REG_WRITE(ah, AR_KEYTABLE_MAC1(entry), macHi | AR_KEYTABLE_VALID);
+
+	return true;
+}
+
+bool
+ath9k_hw_set_keycache_entry(struct ath_hal *ah, u16 entry,
+			    const struct ath9k_keyval *k,
+			    const u8 *mac, int xorKey)
+{
+	const struct ath9k_hw_capabilities *pCap = &ah->ah_caps;
+	u32 key0, key1, key2, key3, key4;
+	u32 keyType;
+	u32 xorMask = xorKey ?
+		(ATH9K_KEY_XOR << 24 | ATH9K_KEY_XOR << 16 | ATH9K_KEY_XOR << 8
+		 | ATH9K_KEY_XOR) : 0;
+	struct ath_hal_5416 *ahp = AH5416(ah);
+
+	if (entry >= pCap->keycache_size) {
+		DPRINTF(ah->ah_sc, ATH_DBG_KEYCACHE,
+			 "%s: entry %u out of range\n", __func__, entry);
+		return false;
+	}
+	switch (k->kv_type) {
+	case ATH9K_CIPHER_AES_OCB:
+		keyType = AR_KEYTABLE_TYPE_AES;
+		break;
+	case ATH9K_CIPHER_AES_CCM:
+		if (!(pCap->hw_caps & ATH9K_HW_CAP_CIPHER_AESCCM)) {
+			DPRINTF(ah->ah_sc, ATH_DBG_KEYCACHE,
+				 "%s: AES-CCM not supported by "
+				 "mac rev 0x%x\n", __func__,
+				 ah->ah_macRev);
+			return false;
+		}
+		keyType = AR_KEYTABLE_TYPE_CCM;
+		break;
+	case ATH9K_CIPHER_TKIP:
+		keyType = AR_KEYTABLE_TYPE_TKIP;
+		if (ATH9K_IS_MIC_ENABLED(ah)
+		    && entry + 64 >= pCap->keycache_size) {
+			DPRINTF(ah->ah_sc, ATH_DBG_KEYCACHE,
+				 "%s: entry %u inappropriate for TKIP\n",
+				 __func__, entry);
+			return false;
+		}
+		break;
+	case ATH9K_CIPHER_WEP:
+		if (k->kv_len < LEN_WEP40) {
+			DPRINTF(ah->ah_sc, ATH_DBG_KEYCACHE,
+				 "%s: WEP key length %u too small\n",
+				 __func__, k->kv_len);
+			return false;
+		}
+		if (k->kv_len <= LEN_WEP40)
+			keyType = AR_KEYTABLE_TYPE_40;
+		else if (k->kv_len <= LEN_WEP104)
+			keyType = AR_KEYTABLE_TYPE_104;
+		else
+			keyType = AR_KEYTABLE_TYPE_128;
+		break;
+	case ATH9K_CIPHER_CLR:
+		keyType = AR_KEYTABLE_TYPE_CLR;
+		break;
+	default:
+		DPRINTF(ah->ah_sc, ATH_DBG_KEYCACHE,
+			 "%s: cipher %u not supported\n", __func__,
+			 k->kv_type);
+		return false;
+	}
+
+	key0 = get_unaligned_le32(k->kv_val + 0) ^ xorMask;
+	key1 = (get_unaligned_le16(k->kv_val + 4) ^ xorMask) & 0xffff;
+	key2 = get_unaligned_le32(k->kv_val + 6) ^ xorMask;
+	key3 = (get_unaligned_le16(k->kv_val + 10) ^ xorMask) & 0xffff;
+	key4 = get_unaligned_le32(k->kv_val + 12) ^ xorMask;
+	if (k->kv_len <= LEN_WEP104)
+		key4 &= 0xff;
+
+	if (keyType == AR_KEYTABLE_TYPE_TKIP && ATH9K_IS_MIC_ENABLED(ah)) {
+		u16 micentry = entry + 64;
+
+		REG_WRITE(ah, AR_KEYTABLE_KEY0(entry), ~key0);
+		REG_WRITE(ah, AR_KEYTABLE_KEY1(entry), ~key1);
+		REG_WRITE(ah, AR_KEYTABLE_KEY2(entry), key2);
+		REG_WRITE(ah, AR_KEYTABLE_KEY3(entry), key3);
+		REG_WRITE(ah, AR_KEYTABLE_KEY4(entry), key4);
+		REG_WRITE(ah, AR_KEYTABLE_TYPE(entry), keyType);
+		(void) ath9k_hw_keysetmac(ah, entry, mac);
+
+		if (ahp->ah_miscMode & AR_PCU_MIC_NEW_LOC_ENA) {
+			u32 mic0, mic1, mic2, mic3, mic4;
+
+			mic0 = get_unaligned_le32(k->kv_mic + 0);
+			mic2 = get_unaligned_le32(k->kv_mic + 4);
+			mic1 = get_unaligned_le16(k->kv_txmic + 2) & 0xffff;
+			mic3 = get_unaligned_le16(k->kv_txmic + 0) & 0xffff;
+			mic4 = get_unaligned_le32(k->kv_txmic + 4);
+			REG_WRITE(ah, AR_KEYTABLE_KEY0(micentry), mic0);
+			REG_WRITE(ah, AR_KEYTABLE_KEY1(micentry), mic1);
+			REG_WRITE(ah, AR_KEYTABLE_KEY2(micentry), mic2);
+			REG_WRITE(ah, AR_KEYTABLE_KEY3(micentry), mic3);
+			REG_WRITE(ah, AR_KEYTABLE_KEY4(micentry), mic4);
+			REG_WRITE(ah, AR_KEYTABLE_TYPE(micentry),
+				  AR_KEYTABLE_TYPE_CLR);
+
+		} else {
+			u32 mic0, mic2;
+
+			mic0 = get_unaligned_le32(k->kv_mic + 0);
+			mic2 = get_unaligned_le32(k->kv_mic + 4);
+			REG_WRITE(ah, AR_KEYTABLE_KEY0(micentry), mic0);
+			REG_WRITE(ah, AR_KEYTABLE_KEY1(micentry), 0);
+			REG_WRITE(ah, AR_KEYTABLE_KEY2(micentry), mic2);
+			REG_WRITE(ah, AR_KEYTABLE_KEY3(micentry), 0);
+			REG_WRITE(ah, AR_KEYTABLE_KEY4(micentry), 0);
+			REG_WRITE(ah, AR_KEYTABLE_TYPE(micentry),
+				  AR_KEYTABLE_TYPE_CLR);
+		}
+		REG_WRITE(ah, AR_KEYTABLE_MAC0(micentry), 0);
+		REG_WRITE(ah, AR_KEYTABLE_MAC1(micentry), 0);
+		REG_WRITE(ah, AR_KEYTABLE_KEY0(entry), key0);
+		REG_WRITE(ah, AR_KEYTABLE_KEY1(entry), key1);
+	} else {
+		REG_WRITE(ah, AR_KEYTABLE_KEY0(entry), key0);
+		REG_WRITE(ah, AR_KEYTABLE_KEY1(entry), key1);
+		REG_WRITE(ah, AR_KEYTABLE_KEY2(entry), key2);
+		REG_WRITE(ah, AR_KEYTABLE_KEY3(entry), key3);
+		REG_WRITE(ah, AR_KEYTABLE_KEY4(entry), key4);
+		REG_WRITE(ah, AR_KEYTABLE_TYPE(entry), keyType);
+
+		(void) ath9k_hw_keysetmac(ah, entry, mac);
+	}
+
+	if (ah->ah_curchan == NULL)
+		return true;
+
+	return true;
+}
+
+bool
+ath9k_hw_updatetxtriglevel(struct ath_hal *ah, bool bIncTrigLevel)
+{
+	struct ath_hal_5416 *ahp = AH5416(ah);
+	u32 txcfg, curLevel, newLevel;
+	enum ath9k_int omask;
+
+	if (ah->ah_txTrigLevel >= MAX_TX_FIFO_THRESHOLD)
+		return false;
+
+	omask = ath9k_hw_set_interrupts(ah,
+					ahp->ah_maskReg & ~ATH9K_INT_GLOBAL);
+
+	txcfg = REG_READ(ah, AR_TXCFG);
+	curLevel = MS(txcfg, AR_FTRIG);
+	newLevel = curLevel;
+	if (bIncTrigLevel) {
+		if (curLevel < MAX_TX_FIFO_THRESHOLD)
+			newLevel++;
+	} else if (curLevel > MIN_TX_FIFO_THRESHOLD)
+		newLevel--;
+	if (newLevel != curLevel)
+		REG_WRITE(ah, AR_TXCFG,
+			  (txcfg & ~AR_FTRIG) | SM(newLevel, AR_FTRIG));
+
+	ath9k_hw_set_interrupts(ah, omask);
+
+	ah->ah_txTrigLevel = newLevel;
+
+	return newLevel != curLevel;
+}
+
+bool ath9k_hw_set_txq_props(struct ath_hal *ah, int q,
+			    const struct ath9k_tx_queue_info *qinfo)
+{
+	u32 cw;
+	struct ath_hal_5416 *ahp = AH5416(ah);
+	struct ath9k_hw_capabilities *pCap = &ah->ah_caps;
+	struct ath9k_tx_queue_info *qi;
+
+	if (q >= pCap->total_queues) {
+		DPRINTF(ah->ah_sc, ATH_DBG_QUEUE, "%s: invalid queue num %u\n",
+			 __func__, q);
+		return false;
+	}
+
+	qi = &ahp->ah_txq[q];
+	if (qi->tqi_type == ATH9K_TX_QUEUE_INACTIVE) {
+		DPRINTF(ah->ah_sc, ATH_DBG_QUEUE, "%s: inactive queue\n",
+			 __func__);
+		return false;
+	}
+
+	DPRINTF(ah->ah_sc, ATH_DBG_QUEUE, "%s: queue %p\n", __func__, qi);
+
+	qi->tqi_ver = qinfo->tqi_ver;
+	qi->tqi_subtype = qinfo->tqi_subtype;
+	qi->tqi_qflags = qinfo->tqi_qflags;
+	qi->tqi_priority = qinfo->tqi_priority;
+	if (qinfo->tqi_aifs != ATH9K_TXQ_USEDEFAULT)
+		qi->tqi_aifs = min(qinfo->tqi_aifs, 255U);
+	else
+		qi->tqi_aifs = INIT_AIFS;
+	if (qinfo->tqi_cwmin != ATH9K_TXQ_USEDEFAULT) {
+		cw = min(qinfo->tqi_cwmin, 1024U);
+		qi->tqi_cwmin = 1;
+		while (qi->tqi_cwmin < cw)
+			qi->tqi_cwmin = (qi->tqi_cwmin << 1) | 1;
+	} else
+		qi->tqi_cwmin = qinfo->tqi_cwmin;
+	if (qinfo->tqi_cwmax != ATH9K_TXQ_USEDEFAULT) {
+		cw = min(qinfo->tqi_cwmax, 1024U);
+		qi->tqi_cwmax = 1;
+		while (qi->tqi_cwmax < cw)
+			qi->tqi_cwmax = (qi->tqi_cwmax << 1) | 1;
+	} else
+		qi->tqi_cwmax = INIT_CWMAX;
+
+	if (qinfo->tqi_shretry != 0)
+		qi->tqi_shretry = min((u32) qinfo->tqi_shretry, 15U);
+	else
+		qi->tqi_shretry = INIT_SH_RETRY;
+	if (qinfo->tqi_lgretry != 0)
+		qi->tqi_lgretry = min((u32) qinfo->tqi_lgretry, 15U);
+	else
+		qi->tqi_lgretry = INIT_LG_RETRY;
+	qi->tqi_cbrPeriod = qinfo->tqi_cbrPeriod;
+	qi->tqi_cbrOverflowLimit = qinfo->tqi_cbrOverflowLimit;
+	qi->tqi_burstTime = qinfo->tqi_burstTime;
+	qi->tqi_readyTime = qinfo->tqi_readyTime;
+
+	switch (qinfo->tqi_subtype) {
+	case ATH9K_WME_UPSD:
+		if (qi->tqi_type == ATH9K_TX_QUEUE_DATA)
+			qi->tqi_intFlags = ATH9K_TXQ_USE_LOCKOUT_BKOFF_DIS;
+		break;
+	default:
+		break;
+	}
+	return true;
+}
+
+bool ath9k_hw_get_txq_props(struct ath_hal *ah, int q,
+			    struct ath9k_tx_queue_info *qinfo)
+{
+	struct ath_hal_5416 *ahp = AH5416(ah);
+	struct ath9k_hw_capabilities *pCap = &ah->ah_caps;
+	struct ath9k_tx_queue_info *qi;
+
+	if (q >= pCap->total_queues) {
+		DPRINTF(ah->ah_sc, ATH_DBG_QUEUE, "%s: invalid queue num %u\n",
+			 __func__, q);
+		return false;
+	}
+
+	qi = &ahp->ah_txq[q];
+	if (qi->tqi_type == ATH9K_TX_QUEUE_INACTIVE) {
+		DPRINTF(ah->ah_sc, ATH_DBG_QUEUE, "%s: inactive queue\n",
+			 __func__);
+		return false;
+	}
+
+	qinfo->tqi_qflags = qi->tqi_qflags;
+	qinfo->tqi_ver = qi->tqi_ver;
+	qinfo->tqi_subtype = qi->tqi_subtype;
+	qinfo->tqi_qflags = qi->tqi_qflags;
+	qinfo->tqi_priority = qi->tqi_priority;
+	qinfo->tqi_aifs = qi->tqi_aifs;
+	qinfo->tqi_cwmin = qi->tqi_cwmin;
+	qinfo->tqi_cwmax = qi->tqi_cwmax;
+	qinfo->tqi_shretry = qi->tqi_shretry;
+	qinfo->tqi_lgretry = qi->tqi_lgretry;
+	qinfo->tqi_cbrPeriod = qi->tqi_cbrPeriod;
+	qinfo->tqi_cbrOverflowLimit = qi->tqi_cbrOverflowLimit;
+	qinfo->tqi_burstTime = qi->tqi_burstTime;
+	qinfo->tqi_readyTime = qi->tqi_readyTime;
+
+	return true;
+}
+
+int
+ath9k_hw_setuptxqueue(struct ath_hal *ah, enum ath9k_tx_queue type,
+		      const struct ath9k_tx_queue_info *qinfo)
+{
+	struct ath_hal_5416 *ahp = AH5416(ah);
+	struct ath9k_tx_queue_info *qi;
+	struct ath9k_hw_capabilities *pCap = &ah->ah_caps;
+	int q;
+
+	switch (type) {
+	case ATH9K_TX_QUEUE_BEACON:
+		q = pCap->total_queues - 1;
+		break;
+	case ATH9K_TX_QUEUE_CAB:
+		q = pCap->total_queues - 2;
+		break;
+	case ATH9K_TX_QUEUE_PSPOLL:
+		q = 1;
+		break;
+	case ATH9K_TX_QUEUE_UAPSD:
+		q = pCap->total_queues - 3;
+		break;
+	case ATH9K_TX_QUEUE_DATA:
+		for (q = 0; q < pCap->total_queues; q++)
+			if (ahp->ah_txq[q].tqi_type ==
+			    ATH9K_TX_QUEUE_INACTIVE)
+				break;
+		if (q == pCap->total_queues) {
+			DPRINTF(ah->ah_sc, ATH_DBG_QUEUE,
+				 "%s: no available tx queue\n", __func__);
+			return -1;
+		}
+		break;
+	default:
+		DPRINTF(ah->ah_sc, ATH_DBG_QUEUE, "%s: bad tx queue type %u\n",
+			 __func__, type);
+		return -1;
+	}
+
+	DPRINTF(ah->ah_sc, ATH_DBG_QUEUE, "%s: queue %u\n", __func__, q);
+
+	qi = &ahp->ah_txq[q];
+	if (qi->tqi_type != ATH9K_TX_QUEUE_INACTIVE) {
+		DPRINTF(ah->ah_sc, ATH_DBG_QUEUE,
+			 "%s: tx queue %u already active\n", __func__, q);
+		return -1;
+	}
+	memset(qi, 0, sizeof(struct ath9k_tx_queue_info));
+	qi->tqi_type = type;
+	if (qinfo == NULL) {
+		qi->tqi_qflags =
+			TXQ_FLAG_TXOKINT_ENABLE
+			| TXQ_FLAG_TXERRINT_ENABLE
+			| TXQ_FLAG_TXDESCINT_ENABLE | TXQ_FLAG_TXURNINT_ENABLE;
+		qi->tqi_aifs = INIT_AIFS;
+		qi->tqi_cwmin = ATH9K_TXQ_USEDEFAULT;
+		qi->tqi_cwmax = INIT_CWMAX;
+		qi->tqi_shretry = INIT_SH_RETRY;
+		qi->tqi_lgretry = INIT_LG_RETRY;
+		qi->tqi_physCompBuf = 0;
+	} else {
+		qi->tqi_physCompBuf = qinfo->tqi_physCompBuf;
+		(void) ath9k_hw_set_txq_props(ah, q, qinfo);
+	}
+
+	return q;
+}
+
+static void
+ath9k_hw_set_txq_interrupts(struct ath_hal *ah,
+			    struct ath9k_tx_queue_info *qi)
+{
+	struct ath_hal_5416 *ahp = AH5416(ah);
+
+	DPRINTF(ah->ah_sc, ATH_DBG_INTERRUPT,
+		 "%s: tx ok 0x%x err 0x%x desc 0x%x eol 0x%x urn 0x%x\n",
+		 __func__, ahp->ah_txOkInterruptMask,
+		 ahp->ah_txErrInterruptMask, ahp->ah_txDescInterruptMask,
+		 ahp->ah_txEolInterruptMask, ahp->ah_txUrnInterruptMask);
+
+	REG_WRITE(ah, AR_IMR_S0,
+		  SM(ahp->ah_txOkInterruptMask, AR_IMR_S0_QCU_TXOK)
+		  | SM(ahp->ah_txDescInterruptMask, AR_IMR_S0_QCU_TXDESC));
+	REG_WRITE(ah, AR_IMR_S1,
+		  SM(ahp->ah_txErrInterruptMask, AR_IMR_S1_QCU_TXERR)
+		  | SM(ahp->ah_txEolInterruptMask, AR_IMR_S1_QCU_TXEOL));
+	REG_RMW_FIELD(ah, AR_IMR_S2,
+		      AR_IMR_S2_QCU_TXURN, ahp->ah_txUrnInterruptMask);
+}
+
+bool ath9k_hw_releasetxqueue(struct ath_hal *ah, u32 q)
+{
+	struct ath_hal_5416 *ahp = AH5416(ah);
+	struct ath9k_hw_capabilities *pCap = &ah->ah_caps;
+	struct ath9k_tx_queue_info *qi;
+
+	if (q >= pCap->total_queues) {
+		DPRINTF(ah->ah_sc, ATH_DBG_QUEUE, "%s: invalid queue num %u\n",
+			 __func__, q);
+		return false;
+	}
+	qi = &ahp->ah_txq[q];
+	if (qi->tqi_type == ATH9K_TX_QUEUE_INACTIVE) {
+		DPRINTF(ah->ah_sc, ATH_DBG_QUEUE, "%s: inactive queue %u\n",
+			 __func__, q);
+		return false;
+	}
+
+	DPRINTF(ah->ah_sc, ATH_DBG_QUEUE, "%s: release queue %u\n",
+		__func__, q);
+
+	qi->tqi_type = ATH9K_TX_QUEUE_INACTIVE;
+	ahp->ah_txOkInterruptMask &= ~(1 << q);
+	ahp->ah_txErrInterruptMask &= ~(1 << q);
+	ahp->ah_txDescInterruptMask &= ~(1 << q);
+	ahp->ah_txEolInterruptMask &= ~(1 << q);
+	ahp->ah_txUrnInterruptMask &= ~(1 << q);
+	ath9k_hw_set_txq_interrupts(ah, qi);
+
+	return true;
+}
+
+bool ath9k_hw_resettxqueue(struct ath_hal *ah, u32 q)
+{
+	struct ath_hal_5416 *ahp = AH5416(ah);
+	struct ath9k_hw_capabilities *pCap = &ah->ah_caps;
+	struct ath9k_channel *chan = ah->ah_curchan;
+	struct ath9k_tx_queue_info *qi;
+	u32 cwMin, chanCwMin, value;
+
+	if (q >= pCap->total_queues) {
+		DPRINTF(ah->ah_sc, ATH_DBG_QUEUE, "%s: invalid queue num %u\n",
+			 __func__, q);
+		return false;
+	}
+	qi = &ahp->ah_txq[q];
+	if (qi->tqi_type == ATH9K_TX_QUEUE_INACTIVE) {
+		DPRINTF(ah->ah_sc, ATH_DBG_QUEUE, "%s: inactive queue %u\n",
+			 __func__, q);
+		return true;
+	}
+
+	DPRINTF(ah->ah_sc, ATH_DBG_QUEUE, "%s: reset queue %u\n", __func__, q);
+
+	if (qi->tqi_cwmin == ATH9K_TXQ_USEDEFAULT) {
+		if (chan && IS_CHAN_B(chan))
+			chanCwMin = INIT_CWMIN_11B;
+		else
+			chanCwMin = INIT_CWMIN;
+
+		for (cwMin = 1; cwMin < chanCwMin; cwMin = (cwMin << 1) | 1);
+	} else
+		cwMin = qi->tqi_cwmin;
+
+	REG_WRITE(ah, AR_DLCL_IFS(q), SM(cwMin, AR_D_LCL_IFS_CWMIN)
+		  | SM(qi->tqi_cwmax, AR_D_LCL_IFS_CWMAX)
+		  | SM(qi->tqi_aifs, AR_D_LCL_IFS_AIFS));
+
+	REG_WRITE(ah, AR_DRETRY_LIMIT(q),
+		  SM(INIT_SSH_RETRY, AR_D_RETRY_LIMIT_STA_SH)
+		  | SM(INIT_SLG_RETRY, AR_D_RETRY_LIMIT_STA_LG)
+		  | SM(qi->tqi_shretry, AR_D_RETRY_LIMIT_FR_SH)
+		);
+
+	REG_WRITE(ah, AR_QMISC(q), AR_Q_MISC_DCU_EARLY_TERM_REQ);
+	REG_WRITE(ah, AR_DMISC(q),
+		  AR_D_MISC_CW_BKOFF_EN | AR_D_MISC_FRAG_WAIT_EN | 0x2);
+
+	if (qi->tqi_cbrPeriod) {
+		REG_WRITE(ah, AR_QCBRCFG(q),
+			  SM(qi->tqi_cbrPeriod, AR_Q_CBRCFG_INTERVAL)
+			  | SM(qi->tqi_cbrOverflowLimit,
+			       AR_Q_CBRCFG_OVF_THRESH));
+		REG_WRITE(ah, AR_QMISC(q),
+			  REG_READ(ah,
+				   AR_QMISC(q)) | AR_Q_MISC_FSP_CBR | (qi->
+					tqi_cbrOverflowLimit
+					?
+					AR_Q_MISC_CBR_EXP_CNTR_LIMIT_EN
+					:
+					0));
+	}
+	if (qi->tqi_readyTime && (qi->tqi_type != ATH9K_TX_QUEUE_CAB)) {
+		REG_WRITE(ah, AR_QRDYTIMECFG(q),
+			  SM(qi->tqi_readyTime, AR_Q_RDYTIMECFG_DURATION) |
+			  AR_Q_RDYTIMECFG_EN);
+	}
+
+	REG_WRITE(ah, AR_DCHNTIME(q),
+		  SM(qi->tqi_burstTime, AR_D_CHNTIME_DUR) |
+		  (qi->tqi_burstTime ? AR_D_CHNTIME_EN : 0));
+
+	if (qi->tqi_burstTime
+	    && (qi->tqi_qflags & TXQ_FLAG_RDYTIME_EXP_POLICY_ENABLE)) {
+		REG_WRITE(ah, AR_QMISC(q),
+			  REG_READ(ah,
+				   AR_QMISC(q)) |
+			  AR_Q_MISC_RDYTIME_EXP_POLICY);
+
+	}
+
+	if (qi->tqi_qflags & TXQ_FLAG_BACKOFF_DISABLE) {
+		REG_WRITE(ah, AR_DMISC(q),
+			  REG_READ(ah, AR_DMISC(q)) |
+			  AR_D_MISC_POST_FR_BKOFF_DIS);
+	}
+	if (qi->tqi_qflags & TXQ_FLAG_FRAG_BURST_BACKOFF_ENABLE) {
+		REG_WRITE(ah, AR_DMISC(q),
+			  REG_READ(ah, AR_DMISC(q)) |
+			  AR_D_MISC_FRAG_BKOFF_EN);
+	}
+	switch (qi->tqi_type) {
+	case ATH9K_TX_QUEUE_BEACON:
+		REG_WRITE(ah, AR_QMISC(q), REG_READ(ah, AR_QMISC(q))
+			  | AR_Q_MISC_FSP_DBA_GATED
+			  | AR_Q_MISC_BEACON_USE
+			  | AR_Q_MISC_CBR_INCR_DIS1);
+
+		REG_WRITE(ah, AR_DMISC(q), REG_READ(ah, AR_DMISC(q))
+			  | (AR_D_MISC_ARB_LOCKOUT_CNTRL_GLOBAL <<
+			     AR_D_MISC_ARB_LOCKOUT_CNTRL_S)
+			  | AR_D_MISC_BEACON_USE
+			  | AR_D_MISC_POST_FR_BKOFF_DIS);
+		break;
+	case ATH9K_TX_QUEUE_CAB:
+		REG_WRITE(ah, AR_QMISC(q), REG_READ(ah, AR_QMISC(q))
+			  | AR_Q_MISC_FSP_DBA_GATED
+			  | AR_Q_MISC_CBR_INCR_DIS1
+			  | AR_Q_MISC_CBR_INCR_DIS0);
+		value = (qi->tqi_readyTime
+			 - (ah->ah_config.sw_beacon_response_time -
+			    ah->ah_config.dma_beacon_response_time)
+			 -
+			 ah->ah_config.additional_swba_backoff) *
+			1024;
+		REG_WRITE(ah, AR_QRDYTIMECFG(q),
+			  value | AR_Q_RDYTIMECFG_EN);
+		REG_WRITE(ah, AR_DMISC(q), REG_READ(ah, AR_DMISC(q))
+			  | (AR_D_MISC_ARB_LOCKOUT_CNTRL_GLOBAL <<
+			     AR_D_MISC_ARB_LOCKOUT_CNTRL_S));
+		break;
+	case ATH9K_TX_QUEUE_PSPOLL:
+		REG_WRITE(ah, AR_QMISC(q),
+			  REG_READ(ah,
+				   AR_QMISC(q)) | AR_Q_MISC_CBR_INCR_DIS1);
+		break;
+	case ATH9K_TX_QUEUE_UAPSD:
+		REG_WRITE(ah, AR_DMISC(q), REG_READ(ah, AR_DMISC(q))
+			  | AR_D_MISC_POST_FR_BKOFF_DIS);
+		break;
+	default:
+		break;
+	}
+
+	if (qi->tqi_intFlags & ATH9K_TXQ_USE_LOCKOUT_BKOFF_DIS) {
+		REG_WRITE(ah, AR_DMISC(q),
+			  REG_READ(ah, AR_DMISC(q)) |
+			  SM(AR_D_MISC_ARB_LOCKOUT_CNTRL_GLOBAL,
+			     AR_D_MISC_ARB_LOCKOUT_CNTRL) |
+			  AR_D_MISC_POST_FR_BKOFF_DIS);
+	}
+
+	if (qi->tqi_qflags & TXQ_FLAG_TXOKINT_ENABLE)
+		ahp->ah_txOkInterruptMask |= 1 << q;
+	else
+		ahp->ah_txOkInterruptMask &= ~(1 << q);
+	if (qi->tqi_qflags & TXQ_FLAG_TXERRINT_ENABLE)
+		ahp->ah_txErrInterruptMask |= 1 << q;
+	else
+		ahp->ah_txErrInterruptMask &= ~(1 << q);
+	if (qi->tqi_qflags & TXQ_FLAG_TXDESCINT_ENABLE)
+		ahp->ah_txDescInterruptMask |= 1 << q;
+	else
+		ahp->ah_txDescInterruptMask &= ~(1 << q);
+	if (qi->tqi_qflags & TXQ_FLAG_TXEOLINT_ENABLE)
+		ahp->ah_txEolInterruptMask |= 1 << q;
+	else
+		ahp->ah_txEolInterruptMask &= ~(1 << q);
+	if (qi->tqi_qflags & TXQ_FLAG_TXURNINT_ENABLE)
+		ahp->ah_txUrnInterruptMask |= 1 << q;
+	else
+		ahp->ah_txUrnInterruptMask &= ~(1 << q);
+	ath9k_hw_set_txq_interrupts(ah, qi);
+
+	return true;
+}
+
+void ath9k_hw_gettxintrtxqs(struct ath_hal *ah, u32 *txqs)
+{
+	struct ath_hal_5416 *ahp = AH5416(ah);
+	*txqs &= ahp->ah_intrTxqs;
+	ahp->ah_intrTxqs &= ~(*txqs);
+}
+
+bool
+ath9k_hw_filltxdesc(struct ath_hal *ah, struct ath_desc *ds,
+		    u32 segLen, bool firstSeg,
+		    bool lastSeg, const struct ath_desc *ds0)
+{
+	struct ar5416_desc *ads = AR5416DESC(ds);
+
+	if (firstSeg) {
+		ads->ds_ctl1 |= segLen | (lastSeg ? 0 : AR_TxMore);
+	} else if (lastSeg) {
+		ads->ds_ctl0 = 0;
+		ads->ds_ctl1 = segLen;
+		ads->ds_ctl2 = AR5416DESC_CONST(ds0)->ds_ctl2;
+		ads->ds_ctl3 = AR5416DESC_CONST(ds0)->ds_ctl3;
+	} else {
+		ads->ds_ctl0 = 0;
+		ads->ds_ctl1 = segLen | AR_TxMore;
+		ads->ds_ctl2 = 0;
+		ads->ds_ctl3 = 0;
+	}
+	ads->ds_txstatus0 = ads->ds_txstatus1 = 0;
+	ads->ds_txstatus2 = ads->ds_txstatus3 = 0;
+	ads->ds_txstatus4 = ads->ds_txstatus5 = 0;
+	ads->ds_txstatus6 = ads->ds_txstatus7 = 0;
+	ads->ds_txstatus8 = ads->ds_txstatus9 = 0;
+	return true;
+}
+
+void ath9k_hw_cleartxdesc(struct ath_hal *ah, struct ath_desc *ds)
+{
+	struct ar5416_desc *ads = AR5416DESC(ds);
+
+	ads->ds_txstatus0 = ads->ds_txstatus1 = 0;
+	ads->ds_txstatus2 = ads->ds_txstatus3 = 0;
+	ads->ds_txstatus4 = ads->ds_txstatus5 = 0;
+	ads->ds_txstatus6 = ads->ds_txstatus7 = 0;
+	ads->ds_txstatus8 = ads->ds_txstatus9 = 0;
+}
+
+int
+ath9k_hw_txprocdesc(struct ath_hal *ah, struct ath_desc *ds)
+{
+	struct ar5416_desc *ads = AR5416DESC(ds);
+
+	if ((ads->ds_txstatus9 & AR_TxDone) == 0)
+		return -EINPROGRESS;
+
+	ds->ds_txstat.ts_seqnum = MS(ads->ds_txstatus9, AR_SeqNum);
+	ds->ds_txstat.ts_tstamp = ads->AR_SendTimestamp;
+	ds->ds_txstat.ts_status = 0;
+	ds->ds_txstat.ts_flags = 0;
+
+	if (ads->ds_txstatus1 & AR_ExcessiveRetries)
+		ds->ds_txstat.ts_status |= ATH9K_TXERR_XRETRY;
+	if (ads->ds_txstatus1 & AR_Filtered)
+		ds->ds_txstat.ts_status |= ATH9K_TXERR_FILT;
+	if (ads->ds_txstatus1 & AR_FIFOUnderrun)
+		ds->ds_txstat.ts_status |= ATH9K_TXERR_FIFO;
+	if (ads->ds_txstatus9 & AR_TxOpExceeded)
+		ds->ds_txstat.ts_status |= ATH9K_TXERR_XTXOP;
+	if (ads->ds_txstatus1 & AR_TxTimerExpired)
+		ds->ds_txstat.ts_status |= ATH9K_TXERR_TIMER_EXPIRED;
+
+	if (ads->ds_txstatus1 & AR_DescCfgErr)
+		ds->ds_txstat.ts_flags |= ATH9K_TX_DESC_CFG_ERR;
+	if (ads->ds_txstatus1 & AR_TxDataUnderrun) {
+		ds->ds_txstat.ts_flags |= ATH9K_TX_DATA_UNDERRUN;
+		ath9k_hw_updatetxtriglevel(ah, true);
+	}
+	if (ads->ds_txstatus1 & AR_TxDelimUnderrun) {
+		ds->ds_txstat.ts_flags |= ATH9K_TX_DELIM_UNDERRUN;
+		ath9k_hw_updatetxtriglevel(ah, true);
+	}
+	if (ads->ds_txstatus0 & AR_TxBaStatus) {
+		ds->ds_txstat.ts_flags |= ATH9K_TX_BA;
+		ds->ds_txstat.ba_low = ads->AR_BaBitmapLow;
+		ds->ds_txstat.ba_high = ads->AR_BaBitmapHigh;
+	}
+
+	ds->ds_txstat.ts_rateindex = MS(ads->ds_txstatus9, AR_FinalTxIdx);
+	switch (ds->ds_txstat.ts_rateindex) {
+	case 0:
+		ds->ds_txstat.ts_ratecode = MS(ads->ds_ctl3, AR_XmitRate0);
+		break;
+	case 1:
+		ds->ds_txstat.ts_ratecode = MS(ads->ds_ctl3, AR_XmitRate1);
+		break;
+	case 2:
+		ds->ds_txstat.ts_ratecode = MS(ads->ds_ctl3, AR_XmitRate2);
+		break;
+	case 3:
+		ds->ds_txstat.ts_ratecode = MS(ads->ds_ctl3, AR_XmitRate3);
+		break;
+	}
+
+	ds->ds_txstat.ts_rssi = MS(ads->ds_txstatus5, AR_TxRSSICombined);
+	ds->ds_txstat.ts_rssi_ctl0 = MS(ads->ds_txstatus0, AR_TxRSSIAnt00);
+	ds->ds_txstat.ts_rssi_ctl1 = MS(ads->ds_txstatus0, AR_TxRSSIAnt01);
+	ds->ds_txstat.ts_rssi_ctl2 = MS(ads->ds_txstatus0, AR_TxRSSIAnt02);
+	ds->ds_txstat.ts_rssi_ext0 = MS(ads->ds_txstatus5, AR_TxRSSIAnt10);
+	ds->ds_txstat.ts_rssi_ext1 = MS(ads->ds_txstatus5, AR_TxRSSIAnt11);
+	ds->ds_txstat.ts_rssi_ext2 = MS(ads->ds_txstatus5, AR_TxRSSIAnt12);
+	ds->ds_txstat.evm0 = ads->AR_TxEVM0;
+	ds->ds_txstat.evm1 = ads->AR_TxEVM1;
+	ds->ds_txstat.evm2 = ads->AR_TxEVM2;
+	ds->ds_txstat.ts_shortretry = MS(ads->ds_txstatus1, AR_RTSFailCnt);
+	ds->ds_txstat.ts_longretry = MS(ads->ds_txstatus1, AR_DataFailCnt);
+	ds->ds_txstat.ts_virtcol = MS(ads->ds_txstatus1, AR_VirtRetryCnt);
+	ds->ds_txstat.ts_antenna = 1;
+
+	return 0;
+}
+
+void
+ath9k_hw_set11n_txdesc(struct ath_hal *ah, struct ath_desc *ds,
+		       u32 pktLen, enum ath9k_pkt_type type, u32 txPower,
+		       u32 keyIx, enum ath9k_key_type keyType, u32 flags)
+{
+	struct ar5416_desc *ads = AR5416DESC(ds);
+	struct ath_hal_5416 *ahp = AH5416(ah);
+
+	txPower += ahp->ah_txPowerIndexOffset;
+	if (txPower > 63)
+		txPower = 63;
+
+	ads->ds_ctl0 = (pktLen & AR_FrameLen)
+		| (flags & ATH9K_TXDESC_VMF ? AR_VirtMoreFrag : 0)
+		| SM(txPower, AR_XmitPower)
+		| (flags & ATH9K_TXDESC_VEOL ? AR_VEOL : 0)
+		| (flags & ATH9K_TXDESC_CLRDMASK ? AR_ClrDestMask : 0)
+		| (flags & ATH9K_TXDESC_INTREQ ? AR_TxIntrReq : 0)
+		| (keyIx != ATH9K_TXKEYIX_INVALID ? AR_DestIdxValid : 0);
+
+	ads->ds_ctl1 =
+		(keyIx != ATH9K_TXKEYIX_INVALID ? SM(keyIx, AR_DestIdx) : 0)
+		| SM(type, AR_FrameType)
+		| (flags & ATH9K_TXDESC_NOACK ? AR_NoAck : 0)
+		| (flags & ATH9K_TXDESC_EXT_ONLY ? AR_ExtOnly : 0)
+		| (flags & ATH9K_TXDESC_EXT_AND_CTL ? AR_ExtAndCtl : 0);
+
+	ads->ds_ctl6 = SM(keyType, AR_EncrType);
+
+	if (AR_SREV_9285(ah)) {
+
+		ads->ds_ctl8 = 0;
+		ads->ds_ctl9 = 0;
+		ads->ds_ctl10 = 0;
+		ads->ds_ctl11 = 0;
+	}
+}
+
+void
+ath9k_hw_set11n_ratescenario(struct ath_hal *ah, struct ath_desc *ds,
+			     struct ath_desc *lastds,
+			     u32 durUpdateEn, u32 rtsctsRate,
+			     u32 rtsctsDuration,
+			     struct ath9k_11n_rate_series series[],
+			     u32 nseries, u32 flags)
+{
+	struct ar5416_desc *ads = AR5416DESC(ds);
+	struct ar5416_desc *last_ads = AR5416DESC(lastds);
+	u32 ds_ctl0;
+
+	(void) nseries;
+	(void) rtsctsDuration;
+
+	if (flags & (ATH9K_TXDESC_RTSENA | ATH9K_TXDESC_CTSENA)) {
+		ds_ctl0 = ads->ds_ctl0;
+
+		if (flags & ATH9K_TXDESC_RTSENA) {
+			ds_ctl0 &= ~AR_CTSEnable;
+			ds_ctl0 |= AR_RTSEnable;
+		} else {
+			ds_ctl0 &= ~AR_RTSEnable;
+			ds_ctl0 |= AR_CTSEnable;
+		}
+
+		ads->ds_ctl0 = ds_ctl0;
+	} else {
+		ads->ds_ctl0 =
+			(ads->ds_ctl0 & ~(AR_RTSEnable | AR_CTSEnable));
+	}
+
+	ads->ds_ctl2 = set11nTries(series, 0)
+		| set11nTries(series, 1)
+		| set11nTries(series, 2)
+		| set11nTries(series, 3)
+		| (durUpdateEn ? AR_DurUpdateEna : 0)
+		| SM(0, AR_BurstDur);
+
+	ads->ds_ctl3 = set11nRate(series, 0)
+		| set11nRate(series, 1)
+		| set11nRate(series, 2)
+		| set11nRate(series, 3);
+
+	ads->ds_ctl4 = set11nPktDurRTSCTS(series, 0)
+		| set11nPktDurRTSCTS(series, 1);
+
+	ads->ds_ctl5 = set11nPktDurRTSCTS(series, 2)
+		| set11nPktDurRTSCTS(series, 3);
+
+	ads->ds_ctl7 = set11nRateFlags(series, 0)
+		| set11nRateFlags(series, 1)
+		| set11nRateFlags(series, 2)
+		| set11nRateFlags(series, 3)
+		| SM(rtsctsRate, AR_RTSCTSRate);
+	last_ads->ds_ctl2 = ads->ds_ctl2;
+	last_ads->ds_ctl3 = ads->ds_ctl3;
+}
+
+void
+ath9k_hw_set11n_aggr_first(struct ath_hal *ah, struct ath_desc *ds,
+			   u32 aggrLen)
+{
+	struct ar5416_desc *ads = AR5416DESC(ds);
+
+	ads->ds_ctl1 |= (AR_IsAggr | AR_MoreAggr);
+
+	ads->ds_ctl6 &= ~AR_AggrLen;
+	ads->ds_ctl6 |= SM(aggrLen, AR_AggrLen);
+}
+
+void
+ath9k_hw_set11n_aggr_middle(struct ath_hal *ah, struct ath_desc *ds,
+			    u32 numDelims)
+{
+	struct ar5416_desc *ads = AR5416DESC(ds);
+	unsigned int ctl6;
+
+	ads->ds_ctl1 |= (AR_IsAggr | AR_MoreAggr);
+
+	ctl6 = ads->ds_ctl6;
+	ctl6 &= ~AR_PadDelim;
+	ctl6 |= SM(numDelims, AR_PadDelim);
+	ads->ds_ctl6 = ctl6;
+}
+
+void ath9k_hw_set11n_aggr_last(struct ath_hal *ah, struct ath_desc *ds)
+{
+	struct ar5416_desc *ads = AR5416DESC(ds);
+
+	ads->ds_ctl1 |= AR_IsAggr;
+	ads->ds_ctl1 &= ~AR_MoreAggr;
+	ads->ds_ctl6 &= ~AR_PadDelim;
+}
+
+void ath9k_hw_clr11n_aggr(struct ath_hal *ah, struct ath_desc *ds)
+{
+	struct ar5416_desc *ads = AR5416DESC(ds);
+
+	ads->ds_ctl1 &= (~AR_IsAggr & ~AR_MoreAggr);
+}
+
+void
+ath9k_hw_set11n_burstduration(struct ath_hal *ah, struct ath_desc *ds,
+			      u32 burstDuration)
+{
+	struct ar5416_desc *ads = AR5416DESC(ds);
+
+	ads->ds_ctl2 &= ~AR_BurstDur;
+	ads->ds_ctl2 |= SM(burstDuration, AR_BurstDur);
+}
+
+void
+ath9k_hw_set11n_virtualmorefrag(struct ath_hal *ah, struct ath_desc *ds,
+				u32 vmf)
+{
+	struct ar5416_desc *ads = AR5416DESC(ds);
+
+	if (vmf)
+		ads->ds_ctl0 |= AR_VirtMoreFrag;
+	else
+		ads->ds_ctl0 &= ~AR_VirtMoreFrag;
+}
+
+void ath9k_hw_putrxbuf(struct ath_hal *ah, u32 rxdp)
+{
+	REG_WRITE(ah, AR_RXDP, rxdp);
+}
+
+void ath9k_hw_rxena(struct ath_hal *ah)
+{
+	REG_WRITE(ah, AR_CR, AR_CR_RXE);
+}
+
+bool ath9k_hw_setrxabort(struct ath_hal *ah, bool set)
+{
+	if (set) {
+
+		REG_SET_BIT(ah, AR_DIAG_SW,
+			    (AR_DIAG_RX_DIS | AR_DIAG_RX_ABORT));
+
+		if (!ath9k_hw_wait
+		    (ah, AR_OBS_BUS_1, AR_OBS_BUS_1_RX_STATE, 0)) {
+			u32 reg;
+
+			REG_CLR_BIT(ah, AR_DIAG_SW,
+				    (AR_DIAG_RX_DIS |
+				     AR_DIAG_RX_ABORT));
+
+			reg = REG_READ(ah, AR_OBS_BUS_1);
+			DPRINTF(ah->ah_sc, ATH_DBG_FATAL,
+				"%s: rx failed to go idle in 10 ms RXSM=0x%x\n",
+				__func__, reg);
+
+			return false;
+		}
+	} else {
+		REG_CLR_BIT(ah, AR_DIAG_SW,
+			    (AR_DIAG_RX_DIS | AR_DIAG_RX_ABORT));
+	}
+
+	return true;
+}
+
+void
+ath9k_hw_setmcastfilter(struct ath_hal *ah, u32 filter0,
+			u32 filter1)
+{
+	REG_WRITE(ah, AR_MCAST_FIL0, filter0);
+	REG_WRITE(ah, AR_MCAST_FIL1, filter1);
+}
+
+bool
+ath9k_hw_setuprxdesc(struct ath_hal *ah, struct ath_desc *ds,
+		     u32 size, u32 flags)
+{
+	struct ar5416_desc *ads = AR5416DESC(ds);
+	struct ath9k_hw_capabilities *pCap = &ah->ah_caps;
+
+	ads->ds_ctl1 = size & AR_BufLen;
+	if (flags & ATH9K_RXDESC_INTREQ)
+		ads->ds_ctl1 |= AR_RxIntrReq;
+
+	ads->ds_rxstatus8 &= ~AR_RxDone;
+	if (!(pCap->hw_caps & ATH9K_HW_CAP_AUTOSLEEP))
+		memset(&(ads->u), 0, sizeof(ads->u));
+	return true;
+}
+
+int
+ath9k_hw_rxprocdesc(struct ath_hal *ah, struct ath_desc *ds,
+		    u32 pa, struct ath_desc *nds, u64 tsf)
+{
+	struct ar5416_desc ads;
+	struct ar5416_desc *adsp = AR5416DESC(ds);
+
+	if ((adsp->ds_rxstatus8 & AR_RxDone) == 0)
+		return -EINPROGRESS;
+
+	ads.u.rx = adsp->u.rx;
+
+	ds->ds_rxstat.rs_status = 0;
+	ds->ds_rxstat.rs_flags = 0;
+
+	ds->ds_rxstat.rs_datalen = ads.ds_rxstatus1 & AR_DataLen;
+	ds->ds_rxstat.rs_tstamp = ads.AR_RcvTimestamp;
+
+	ds->ds_rxstat.rs_rssi = MS(ads.ds_rxstatus4, AR_RxRSSICombined);
+	ds->ds_rxstat.rs_rssi_ctl0 = MS(ads.ds_rxstatus0, AR_RxRSSIAnt00);
+	ds->ds_rxstat.rs_rssi_ctl1 = MS(ads.ds_rxstatus0, AR_RxRSSIAnt01);
+	ds->ds_rxstat.rs_rssi_ctl2 = MS(ads.ds_rxstatus0, AR_RxRSSIAnt02);
+	ds->ds_rxstat.rs_rssi_ext0 = MS(ads.ds_rxstatus4, AR_RxRSSIAnt10);
+	ds->ds_rxstat.rs_rssi_ext1 = MS(ads.ds_rxstatus4, AR_RxRSSIAnt11);
+	ds->ds_rxstat.rs_rssi_ext2 = MS(ads.ds_rxstatus4, AR_RxRSSIAnt12);
+	if (ads.ds_rxstatus8 & AR_RxKeyIdxValid)
+		ds->ds_rxstat.rs_keyix = MS(ads.ds_rxstatus8, AR_KeyIdx);
+	else
+		ds->ds_rxstat.rs_keyix = ATH9K_RXKEYIX_INVALID;
+
+	ds->ds_rxstat.rs_rate = RXSTATUS_RATE(ah, (&ads));
+	ds->ds_rxstat.rs_more = (ads.ds_rxstatus1 & AR_RxMore) ? 1 : 0;
+
+	ds->ds_rxstat.rs_isaggr = (ads.ds_rxstatus8 & AR_RxAggr) ? 1 : 0;
+	ds->ds_rxstat.rs_moreaggr =
+		(ads.ds_rxstatus8 & AR_RxMoreAggr) ? 1 : 0;
+	ds->ds_rxstat.rs_antenna = MS(ads.ds_rxstatus3, AR_RxAntenna);
+	ds->ds_rxstat.rs_flags =
+		(ads.ds_rxstatus3 & AR_GI) ? ATH9K_RX_GI : 0;
+	ds->ds_rxstat.rs_flags |=
+		(ads.ds_rxstatus3 & AR_2040) ? ATH9K_RX_2040 : 0;
+
+	if (ads.ds_rxstatus8 & AR_PreDelimCRCErr)
+		ds->ds_rxstat.rs_flags |= ATH9K_RX_DELIM_CRC_PRE;
+	if (ads.ds_rxstatus8 & AR_PostDelimCRCErr)
+		ds->ds_rxstat.rs_flags |= ATH9K_RX_DELIM_CRC_POST;
+	if (ads.ds_rxstatus8 & AR_DecryptBusyErr)
+		ds->ds_rxstat.rs_flags |= ATH9K_RX_DECRYPT_BUSY;
+
+	if ((ads.ds_rxstatus8 & AR_RxFrameOK) == 0) {
+
+		if (ads.ds_rxstatus8 & AR_CRCErr)
+			ds->ds_rxstat.rs_status |= ATH9K_RXERR_CRC;
+		else if (ads.ds_rxstatus8 & AR_PHYErr) {
+			u32 phyerr;
+
+			ds->ds_rxstat.rs_status |= ATH9K_RXERR_PHY;
+			phyerr = MS(ads.ds_rxstatus8, AR_PHYErrCode);
+			ds->ds_rxstat.rs_phyerr = phyerr;
+		} else if (ads.ds_rxstatus8 & AR_DecryptCRCErr)
+			ds->ds_rxstat.rs_status |= ATH9K_RXERR_DECRYPT;
+		else if (ads.ds_rxstatus8 & AR_MichaelErr)
+			ds->ds_rxstat.rs_status |= ATH9K_RXERR_MIC;
+	}
+
+	return 0;
+}
+
+static void ath9k_hw_setup_rate_table(struct ath_hal *ah,
+				      struct ath9k_rate_table *rt)
+{
+	int i;
+
+	if (rt->rateCodeToIndex[0] != 0)
+		return;
+	for (i = 0; i < 256; i++)
+		rt->rateCodeToIndex[i] = (u8) -1;
+	for (i = 0; i < rt->rateCount; i++) {
+		u8 code = rt->info[i].rateCode;
+		u8 cix = rt->info[i].controlRate;
+
+		rt->rateCodeToIndex[code] = i;
+		rt->rateCodeToIndex[code | rt->info[i].shortPreamble] = i;
+
+		rt->info[i].lpAckDuration =
+			ath9k_hw_computetxtime(ah, rt,
+					       WLAN_CTRL_FRAME_SIZE,
+					       cix,
+					       false);
+		rt->info[i].spAckDuration =
+			ath9k_hw_computetxtime(ah, rt,
+					       WLAN_CTRL_FRAME_SIZE,
+					       cix,
+					       true);
+	}
+}
+
+const struct ath9k_rate_table *ath9k_hw_getratetable(struct ath_hal *ah,
+						   u32 mode)
+{
+	struct ath9k_rate_table *rt;
+	switch (mode) {
+	case ATH9K_MODE_11A:
+		rt = &ar5416_11a_table;
+		break;
+	case ATH9K_MODE_11B:
+		rt = &ar5416_11b_table;
+		break;
+	case ATH9K_MODE_11G:
+		rt = &ar5416_11g_table;
+		break;
+	case ATH9K_MODE_11NG_HT20:
+	case ATH9K_MODE_11NG_HT40PLUS:
+	case ATH9K_MODE_11NG_HT40MINUS:
+		rt = &ar5416_11ng_table;
+		break;
+	case ATH9K_MODE_11NA_HT20:
+	case ATH9K_MODE_11NA_HT40PLUS:
+	case ATH9K_MODE_11NA_HT40MINUS:
+		rt = &ar5416_11na_table;
+		break;
+	default:
+		DPRINTF(ah->ah_sc, ATH_DBG_CHANNEL, "%s: invalid mode 0x%x\n",
+			 __func__, mode);
+		return NULL;
+	}
+	ath9k_hw_setup_rate_table(ah, rt);
+	return rt;
+}
+
+static const char *ath9k_hw_devname(u16 devid)
+{
+	switch (devid) {
+	case AR5416_DEVID_PCI:
+	case AR5416_DEVID_PCIE:
+		return "Atheros 5416";
+	case AR9160_DEVID_PCI:
+		return "Atheros 9160";
+	case AR9280_DEVID_PCI:
+	case AR9280_DEVID_PCIE:
+		return "Atheros 9280";
+	}
+	return NULL;
+}
+
+const char *ath9k_hw_probe(u16 vendorid, u16 devid)
+{
+	return vendorid == ATHEROS_VENDOR_ID ?
+		ath9k_hw_devname(devid) : NULL;
+}
+
+struct ath_hal *ath9k_hw_attach(u16 devid,
+				struct ath_softc *sc,
+				void __iomem *mem,
+				int *error)
+{
+	struct ath_hal *ah = NULL;
+
+	switch (devid) {
+	case AR5416_DEVID_PCI:
+	case AR5416_DEVID_PCIE:
+	case AR9160_DEVID_PCI:
+	case AR9280_DEVID_PCI:
+	case AR9280_DEVID_PCIE:
+		ah = ath9k_hw_do_attach(devid, sc, mem, error);
+		break;
+	default:
+		DPRINTF(ah->ah_sc, ATH_DBG_ANY,
+			 "devid=0x%x not supported.\n", devid);
+		ah = NULL;
+		*error = -ENXIO;
+		break;
+	}
+	if (ah != NULL) {
+		ah->ah_devid = ah->ah_devid;
+		ah->ah_subvendorid = ah->ah_subvendorid;
+		ah->ah_macVersion = ah->ah_macVersion;
+		ah->ah_macRev = ah->ah_macRev;
+		ah->ah_phyRev = ah->ah_phyRev;
+		ah->ah_analog5GhzRev = ah->ah_analog5GhzRev;
+		ah->ah_analog2GhzRev = ah->ah_analog2GhzRev;
+	}
+	return ah;
+}
+
+u16
+ath9k_hw_computetxtime(struct ath_hal *ah,
+		       const struct ath9k_rate_table *rates,
+		       u32 frameLen, u16 rateix,
+		       bool shortPreamble)
+{
+	u32 bitsPerSymbol, numBits, numSymbols, phyTime, txTime;
+	u32 kbps;
+
+	kbps = rates->info[rateix].rateKbps;
+
+	if (kbps == 0)
+		return 0;
+	switch (rates->info[rateix].phy) {
+
+	case PHY_CCK:
+		phyTime = CCK_PREAMBLE_BITS + CCK_PLCP_BITS;
+		if (shortPreamble && rates->info[rateix].shortPreamble)
+			phyTime >>= 1;
+		numBits = frameLen << 3;
+		txTime = CCK_SIFS_TIME + phyTime
+			+ ((numBits * 1000) / kbps);
+		break;
+	case PHY_OFDM:
+		if (ah->ah_curchan && IS_CHAN_QUARTER_RATE(ah->ah_curchan)) {
+			bitsPerSymbol =
+				(kbps * OFDM_SYMBOL_TIME_QUARTER) / 1000;
+
+			numBits = OFDM_PLCP_BITS + (frameLen << 3);
+			numSymbols = DIV_ROUND_UP(numBits, bitsPerSymbol);
+			txTime = OFDM_SIFS_TIME_QUARTER
+				+ OFDM_PREAMBLE_TIME_QUARTER
+				+ (numSymbols * OFDM_SYMBOL_TIME_QUARTER);
+		} else if (ah->ah_curchan &&
+			   IS_CHAN_HALF_RATE(ah->ah_curchan)) {
+			bitsPerSymbol =
+				(kbps * OFDM_SYMBOL_TIME_HALF) / 1000;
+
+			numBits = OFDM_PLCP_BITS + (frameLen << 3);
+			numSymbols = DIV_ROUND_UP(numBits, bitsPerSymbol);
+			txTime = OFDM_SIFS_TIME_HALF +
+				OFDM_PREAMBLE_TIME_HALF
+				+ (numSymbols * OFDM_SYMBOL_TIME_HALF);
+		} else {
+			bitsPerSymbol = (kbps * OFDM_SYMBOL_TIME) / 1000;
+
+			numBits = OFDM_PLCP_BITS + (frameLen << 3);
+			numSymbols = DIV_ROUND_UP(numBits, bitsPerSymbol);
+			txTime = OFDM_SIFS_TIME + OFDM_PREAMBLE_TIME
+				+ (numSymbols * OFDM_SYMBOL_TIME);
+		}
+		break;
+
+	default:
+		DPRINTF(ah->ah_sc, ATH_DBG_PHY_IO,
+			 "%s: unknown phy %u (rate ix %u)\n", __func__,
+			 rates->info[rateix].phy, rateix);
+		txTime = 0;
+		break;
+	}
+	return txTime;
+}
+
+u32 ath9k_hw_mhz2ieee(struct ath_hal *ah, u32 freq, u32 flags)
+{
+	if (flags & CHANNEL_2GHZ) {
+		if (freq == 2484)
+			return 14;
+		if (freq < 2484)
+			return (freq - 2407) / 5;
+		else
+			return 15 + ((freq - 2512) / 20);
+	} else if (flags & CHANNEL_5GHZ) {
+		if (ath9k_regd_is_public_safety_sku(ah) &&
+		    IS_CHAN_IN_PUBLIC_SAFETY_BAND(freq)) {
+			return ((freq * 10) +
+				(((freq % 5) == 2) ? 5 : 0) - 49400) / 5;
+		} else if ((flags & CHANNEL_A) && (freq <= 5000)) {
+			return (freq - 4000) / 5;
+		} else {
+			return (freq - 5000) / 5;
+		}
+	} else {
+		if (freq == 2484)
+			return 14;
+		if (freq < 2484)
+			return (freq - 2407) / 5;
+		if (freq < 5000) {
+			if (ath9k_regd_is_public_safety_sku(ah)
+			    && IS_CHAN_IN_PUBLIC_SAFETY_BAND(freq)) {
+				return ((freq * 10) +
+					(((freq % 5) ==
+					  2) ? 5 : 0) - 49400) / 5;
+			} else if (freq > 4900) {
+				return (freq - 4000) / 5;
+			} else {
+				return 15 + ((freq - 2512) / 20);
+			}
+		}
+		return (freq - 5000) / 5;
+	}
+}
+
+int16_t
+ath9k_hw_getchan_noise(struct ath_hal *ah, struct ath9k_channel *chan)
+{
+	struct ath9k_channel *ichan;
+
+	ichan = ath9k_regd_check_channel(ah, chan);
+	if (ichan == NULL) {
+		DPRINTF(ah->ah_sc, ATH_DBG_NF_CAL,
+			 "%s: invalid channel %u/0x%x; no mapping\n",
+			 __func__, chan->channel, chan->channelFlags);
+		return 0;
+	}
+	if (ichan->rawNoiseFloor == 0) {
+		enum wireless_mode mode = ath9k_hw_chan2wmode(ah, chan);
+		return NOISE_FLOOR[mode];
+	} else
+		return ichan->rawNoiseFloor;
+}
+
+bool ath9k_hw_set_tsfadjust(struct ath_hal *ah, u32 setting)
+{
+	struct ath_hal_5416 *ahp = AH5416(ah);
+
+	if (setting)
+		ahp->ah_miscMode |= AR_PCU_TX_ADD_TSF;
+	else
+		ahp->ah_miscMode &= ~AR_PCU_TX_ADD_TSF;
+	return true;
+}
+
+bool ath9k_hw_phycounters(struct ath_hal *ah)
+{
+	struct ath_hal_5416 *ahp = AH5416(ah);
+
+	return ahp->ah_hasHwPhyCounters ? true : false;
+}
+
+u32 ath9k_hw_gettxbuf(struct ath_hal *ah, u32 q)
+{
+	return REG_READ(ah, AR_QTXDP(q));
+}
+
+bool ath9k_hw_puttxbuf(struct ath_hal *ah, u32 q,
+		       u32 txdp)
+{
+	REG_WRITE(ah, AR_QTXDP(q), txdp);
+
+	return true;
+}
+
+bool ath9k_hw_txstart(struct ath_hal *ah, u32 q)
+{
+	DPRINTF(ah->ah_sc, ATH_DBG_QUEUE, "%s: queue %u\n", __func__, q);
+
+	REG_WRITE(ah, AR_Q_TXE, 1 << q);
+
+	return true;
+}
+
+u32 ath9k_hw_numtxpending(struct ath_hal *ah, u32 q)
+{
+	u32 npend;
+
+	npend = REG_READ(ah, AR_QSTS(q)) & AR_Q_STS_PEND_FR_CNT;
+	if (npend == 0) {
+
+		if (REG_READ(ah, AR_Q_TXE) & (1 << q))
+			npend = 1;
+	}
+	return npend;
+}
+
+bool ath9k_hw_stoptxdma(struct ath_hal *ah, u32 q)
+{
+	u32 wait;
+
+	REG_WRITE(ah, AR_Q_TXD, 1 << q);
+
+	for (wait = 1000; wait != 0; wait--) {
+		if (ath9k_hw_numtxpending(ah, q) == 0)
+			break;
+		udelay(100);
+	}
+
+	if (ath9k_hw_numtxpending(ah, q)) {
+		u32 tsfLow, j;
+
+		DPRINTF(ah->ah_sc, ATH_DBG_QUEUE,
+			 "%s: Num of pending TX Frames %d on Q %d\n",
+			 __func__, ath9k_hw_numtxpending(ah, q), q);
+
+		for (j = 0; j < 2; j++) {
+			tsfLow = REG_READ(ah, AR_TSF_L32);
+			REG_WRITE(ah, AR_QUIET2,
+				  SM(10, AR_QUIET2_QUIET_DUR));
+			REG_WRITE(ah, AR_QUIET_PERIOD, 100);
+			REG_WRITE(ah, AR_NEXT_QUIET_TIMER, tsfLow >> 10);
+			REG_SET_BIT(ah, AR_TIMER_MODE,
+				       AR_QUIET_TIMER_EN);
+
+			if ((REG_READ(ah, AR_TSF_L32) >> 10) ==
+			    (tsfLow >> 10)) {
+				break;
+			}
+			DPRINTF(ah->ah_sc, ATH_DBG_QUEUE,
+				"%s: TSF have moved while trying to set "
+				"quiet time TSF: 0x%08x\n",
+				__func__, tsfLow);
+		}
+
+		REG_SET_BIT(ah, AR_DIAG_SW, AR_DIAG_FORCE_CH_IDLE_HIGH);
+
+		udelay(200);
+		REG_CLR_BIT(ah, AR_TIMER_MODE, AR_QUIET_TIMER_EN);
+
+		wait = 1000;
+
+		while (ath9k_hw_numtxpending(ah, q)) {
+			if ((--wait) == 0) {
+				DPRINTF(ah->ah_sc, ATH_DBG_XMIT,
+					"%s: Failed to stop Tx DMA in 100 "
+					"msec after killing last frame\n",
+					__func__);
+				break;
+			}
+			udelay(100);
+		}
+
+		REG_CLR_BIT(ah, AR_DIAG_SW, AR_DIAG_FORCE_CH_IDLE_HIGH);
+	}
+
+	REG_WRITE(ah, AR_Q_TXD, 0);
+	return wait != 0;
+}
diff --git a/drivers/net/wireless/ath9k/hw.h b/drivers/net/wireless/ath9k/hw.h
new file mode 100644
index 000000000000..ae680f21ba7e
--- /dev/null
+++ b/drivers/net/wireless/ath9k/hw.h
@@ -0,0 +1,969 @@
+/*
+ * Copyright (c) 2008 Atheros Communications Inc.
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#ifndef HW_H
+#define HW_H
+
+#include <linux/if_ether.h>
+#include <linux/delay.h>
+
+struct ar5416_desc {
+	u32 ds_link;
+	u32 ds_data;
+	u32 ds_ctl0;
+	u32 ds_ctl1;
+	union {
+		struct {
+			u32 ctl2;
+			u32 ctl3;
+			u32 ctl4;
+			u32 ctl5;
+			u32 ctl6;
+			u32 ctl7;
+			u32 ctl8;
+			u32 ctl9;
+			u32 ctl10;
+			u32 ctl11;
+			u32 status0;
+			u32 status1;
+			u32 status2;
+			u32 status3;
+			u32 status4;
+			u32 status5;
+			u32 status6;
+			u32 status7;
+			u32 status8;
+			u32 status9;
+		} tx;
+		struct {
+			u32 status0;
+			u32 status1;
+			u32 status2;
+			u32 status3;
+			u32 status4;
+			u32 status5;
+			u32 status6;
+			u32 status7;
+			u32 status8;
+		} rx;
+	} u;
+} __packed;
+
+#define AR5416DESC(_ds)         ((struct ar5416_desc *)(_ds))
+#define AR5416DESC_CONST(_ds)   ((const struct ar5416_desc *)(_ds))
+
+#define ds_ctl2     u.tx.ctl2
+#define ds_ctl3     u.tx.ctl3
+#define ds_ctl4     u.tx.ctl4
+#define ds_ctl5     u.tx.ctl5
+#define ds_ctl6     u.tx.ctl6
+#define ds_ctl7     u.tx.ctl7
+#define ds_ctl8     u.tx.ctl8
+#define ds_ctl9     u.tx.ctl9
+#define ds_ctl10    u.tx.ctl10
+#define ds_ctl11    u.tx.ctl11
+
+#define ds_txstatus0    u.tx.status0
+#define ds_txstatus1    u.tx.status1
+#define ds_txstatus2    u.tx.status2
+#define ds_txstatus3    u.tx.status3
+#define ds_txstatus4    u.tx.status4
+#define ds_txstatus5    u.tx.status5
+#define ds_txstatus6    u.tx.status6
+#define ds_txstatus7    u.tx.status7
+#define ds_txstatus8    u.tx.status8
+#define ds_txstatus9    u.tx.status9
+
+#define ds_rxstatus0    u.rx.status0
+#define ds_rxstatus1    u.rx.status1
+#define ds_rxstatus2    u.rx.status2
+#define ds_rxstatus3    u.rx.status3
+#define ds_rxstatus4    u.rx.status4
+#define ds_rxstatus5    u.rx.status5
+#define ds_rxstatus6    u.rx.status6
+#define ds_rxstatus7    u.rx.status7
+#define ds_rxstatus8    u.rx.status8
+
+#define AR_FrameLen         0x00000fff
+#define AR_VirtMoreFrag     0x00001000
+#define AR_TxCtlRsvd00      0x0000e000
+#define AR_XmitPower        0x003f0000
+#define AR_XmitPower_S      16
+#define AR_RTSEnable        0x00400000
+#define AR_VEOL             0x00800000
+#define AR_ClrDestMask      0x01000000
+#define AR_TxCtlRsvd01      0x1e000000
+#define AR_TxIntrReq        0x20000000
+#define AR_DestIdxValid     0x40000000
+#define AR_CTSEnable        0x80000000
+
+#define AR_BufLen           0x00000fff
+#define AR_TxMore           0x00001000
+#define AR_DestIdx          0x000fe000
+#define AR_DestIdx_S        13
+#define AR_FrameType        0x00f00000
+#define AR_FrameType_S      20
+#define AR_NoAck            0x01000000
+#define AR_InsertTS         0x02000000
+#define AR_CorruptFCS       0x04000000
+#define AR_ExtOnly          0x08000000
+#define AR_ExtAndCtl        0x10000000
+#define AR_MoreAggr         0x20000000
+#define AR_IsAggr           0x40000000
+
+#define AR_BurstDur         0x00007fff
+#define AR_BurstDur_S       0
+#define AR_DurUpdateEna     0x00008000
+#define AR_XmitDataTries0   0x000f0000
+#define AR_XmitDataTries0_S 16
+#define AR_XmitDataTries1   0x00f00000
+#define AR_XmitDataTries1_S 20
+#define AR_XmitDataTries2   0x0f000000
+#define AR_XmitDataTries2_S 24
+#define AR_XmitDataTries3   0xf0000000
+#define AR_XmitDataTries3_S 28
+
+#define AR_XmitRate0        0x000000ff
+#define AR_XmitRate0_S      0
+#define AR_XmitRate1        0x0000ff00
+#define AR_XmitRate1_S      8
+#define AR_XmitRate2        0x00ff0000
+#define AR_XmitRate2_S      16
+#define AR_XmitRate3        0xff000000
+#define AR_XmitRate3_S      24
+
+#define AR_PacketDur0       0x00007fff
+#define AR_PacketDur0_S     0
+#define AR_RTSCTSQual0      0x00008000
+#define AR_PacketDur1       0x7fff0000
+#define AR_PacketDur1_S     16
+#define AR_RTSCTSQual1      0x80000000
+
+#define AR_PacketDur2       0x00007fff
+#define AR_PacketDur2_S     0
+#define AR_RTSCTSQual2      0x00008000
+#define AR_PacketDur3       0x7fff0000
+#define AR_PacketDur3_S     16
+#define AR_RTSCTSQual3      0x80000000
+
+#define AR_AggrLen          0x0000ffff
+#define AR_AggrLen_S        0
+#define AR_TxCtlRsvd60      0x00030000
+#define AR_PadDelim         0x03fc0000
+#define AR_PadDelim_S       18
+#define AR_EncrType         0x0c000000
+#define AR_EncrType_S       26
+#define AR_TxCtlRsvd61      0xf0000000
+
+#define AR_2040_0           0x00000001
+#define AR_GI0              0x00000002
+#define AR_ChainSel0        0x0000001c
+#define AR_ChainSel0_S      2
+#define AR_2040_1           0x00000020
+#define AR_GI1              0x00000040
+#define AR_ChainSel1        0x00000380
+#define AR_ChainSel1_S      7
+#define AR_2040_2           0x00000400
+#define AR_GI2              0x00000800
+#define AR_ChainSel2        0x00007000
+#define AR_ChainSel2_S      12
+#define AR_2040_3           0x00008000
+#define AR_GI3              0x00010000
+#define AR_ChainSel3        0x000e0000
+#define AR_ChainSel3_S      17
+#define AR_RTSCTSRate       0x0ff00000
+#define AR_RTSCTSRate_S     20
+#define AR_TxCtlRsvd70      0xf0000000
+
+#define AR_TxRSSIAnt00      0x000000ff
+#define AR_TxRSSIAnt00_S    0
+#define AR_TxRSSIAnt01      0x0000ff00
+#define AR_TxRSSIAnt01_S    8
+#define AR_TxRSSIAnt02      0x00ff0000
+#define AR_TxRSSIAnt02_S    16
+#define AR_TxStatusRsvd00   0x3f000000
+#define AR_TxBaStatus       0x40000000
+#define AR_TxStatusRsvd01   0x80000000
+
+#define AR_FrmXmitOK            0x00000001
+#define AR_ExcessiveRetries     0x00000002
+#define AR_FIFOUnderrun         0x00000004
+#define AR_Filtered             0x00000008
+#define AR_RTSFailCnt           0x000000f0
+#define AR_RTSFailCnt_S         4
+#define AR_DataFailCnt          0x00000f00
+#define AR_DataFailCnt_S        8
+#define AR_VirtRetryCnt         0x0000f000
+#define AR_VirtRetryCnt_S       12
+#define AR_TxDelimUnderrun      0x00010000
+#define AR_TxDataUnderrun       0x00020000
+#define AR_DescCfgErr           0x00040000
+#define AR_TxTimerExpired       0x00080000
+#define AR_TxStatusRsvd10       0xfff00000
+
+#define AR_SendTimestamp    ds_txstatus2
+#define AR_BaBitmapLow      ds_txstatus3
+#define AR_BaBitmapHigh     ds_txstatus4
+
+#define AR_TxRSSIAnt10      0x000000ff
+#define AR_TxRSSIAnt10_S    0
+#define AR_TxRSSIAnt11      0x0000ff00
+#define AR_TxRSSIAnt11_S    8
+#define AR_TxRSSIAnt12      0x00ff0000
+#define AR_TxRSSIAnt12_S    16
+#define AR_TxRSSICombined   0xff000000
+#define AR_TxRSSICombined_S 24
+
+#define AR_TxEVM0           ds_txstatus5
+#define AR_TxEVM1           ds_txstatus6
+#define AR_TxEVM2           ds_txstatus7
+
+#define AR_TxDone           0x00000001
+#define AR_SeqNum           0x00001ffe
+#define AR_SeqNum_S         1
+#define AR_TxStatusRsvd80   0x0001e000
+#define AR_TxOpExceeded     0x00020000
+#define AR_TxStatusRsvd81   0x001c0000
+#define AR_FinalTxIdx       0x00600000
+#define AR_FinalTxIdx_S     21
+#define AR_TxStatusRsvd82   0x01800000
+#define AR_PowerMgmt        0x02000000
+#define AR_TxStatusRsvd83   0xfc000000
+
+#define AR_RxCTLRsvd00  0xffffffff
+
+#define AR_BufLen       0x00000fff
+#define AR_RxCtlRsvd00  0x00001000
+#define AR_RxIntrReq    0x00002000
+#define AR_RxCtlRsvd01  0xffffc000
+
+#define AR_RxRSSIAnt00      0x000000ff
+#define AR_RxRSSIAnt00_S    0
+#define AR_RxRSSIAnt01      0x0000ff00
+#define AR_RxRSSIAnt01_S    8
+#define AR_RxRSSIAnt02      0x00ff0000
+#define AR_RxRSSIAnt02_S    16
+#define AR_RxRate           0xff000000
+#define AR_RxRate_S         24
+#define AR_RxStatusRsvd00   0xff000000
+
+#define AR_DataLen          0x00000fff
+#define AR_RxMore           0x00001000
+#define AR_NumDelim         0x003fc000
+#define AR_NumDelim_S       14
+#define AR_RxStatusRsvd10   0xff800000
+
+#define AR_RcvTimestamp     ds_rxstatus2
+
+#define AR_GI               0x00000001
+#define AR_2040             0x00000002
+#define AR_Parallel40       0x00000004
+#define AR_Parallel40_S     2
+#define AR_RxStatusRsvd30   0x000000f8
+#define AR_RxAntenna	    0xffffff00
+#define AR_RxAntenna_S	    8
+
+#define AR_RxRSSIAnt10            0x000000ff
+#define AR_RxRSSIAnt10_S          0
+#define AR_RxRSSIAnt11            0x0000ff00
+#define AR_RxRSSIAnt11_S          8
+#define AR_RxRSSIAnt12            0x00ff0000
+#define AR_RxRSSIAnt12_S          16
+#define AR_RxRSSICombined         0xff000000
+#define AR_RxRSSICombined_S       24
+
+#define AR_RxEVM0           ds_rxstatus4
+#define AR_RxEVM1           ds_rxstatus5
+#define AR_RxEVM2           ds_rxstatus6
+
+#define AR_RxDone           0x00000001
+#define AR_RxFrameOK        0x00000002
+#define AR_CRCErr           0x00000004
+#define AR_DecryptCRCErr    0x00000008
+#define AR_PHYErr           0x00000010
+#define AR_MichaelErr       0x00000020
+#define AR_PreDelimCRCErr   0x00000040
+#define AR_RxStatusRsvd70   0x00000080
+#define AR_RxKeyIdxValid    0x00000100
+#define AR_KeyIdx           0x0000fe00
+#define AR_KeyIdx_S         9
+#define AR_PHYErrCode       0x0000ff00
+#define AR_PHYErrCode_S     8
+#define AR_RxMoreAggr       0x00010000
+#define AR_RxAggr           0x00020000
+#define AR_PostDelimCRCErr  0x00040000
+#define AR_RxStatusRsvd71   0x3ff80000
+#define AR_DecryptBusyErr   0x40000000
+#define AR_KeyMiss          0x80000000
+
+#define AR5416_MAGIC        0x19641014
+
+#define RXSTATUS_RATE(ah, ads)  (AR_SREV_5416_V20_OR_LATER(ah) ?	\
+				 MS(ads->ds_rxstatus0, AR_RxRate) :	\
+				 (ads->ds_rxstatus3 >> 2) & 0xFF)
+#define RXSTATUS_DUPLICATE(ah, ads)  (AR_SREV_5416_V20_OR_LATER(ah) ?	\
+				      MS(ads->ds_rxstatus3, AR_Parallel40) : \
+				      (ads->ds_rxstatus3 >> 10) & 0x1)
+
+#define set11nTries(_series, _index)				\
+	(SM((_series)[_index].Tries, AR_XmitDataTries##_index))
+
+#define set11nRate(_series, _index)				\
+	(SM((_series)[_index].Rate, AR_XmitRate##_index))
+
+#define set11nPktDurRTSCTS(_series, _index)				\
+	(SM((_series)[_index].PktDuration, AR_PacketDur##_index) |	\
+	((_series)[_index].RateFlags & ATH9K_RATESERIES_RTS_CTS   ?	\
+		AR_RTSCTSQual##_index : 0))
+
+#define set11nRateFlags(_series, _index)				\
+	(((_series)[_index].RateFlags & ATH9K_RATESERIES_2040 ? \
+		AR_2040_##_index : 0) \
+	|((_series)[_index].RateFlags & ATH9K_RATESERIES_HALFGI ? \
+		AR_GI##_index : 0) \
+	|SM((_series)[_index].ChSel, AR_ChainSel##_index))
+
+#define AR_SREV_9100(ah) ((ah->ah_macVersion) == AR_SREV_VERSION_9100)
+
+#define INIT_CONFIG_STATUS  0x00000000
+#define INIT_RSSI_THR       0x00000700
+#define INIT_BCON_CNTRL_REG 0x00000000
+
+#define MIN_TX_FIFO_THRESHOLD   0x1
+#define MAX_TX_FIFO_THRESHOLD   ((4096 / 64) - 1)
+#define INIT_TX_FIFO_THRESHOLD  MIN_TX_FIFO_THRESHOLD
+
+#define NUM_CORNER_FIX_BITS_2133    7
+#define CCK_OFDM_GAIN_DELTA         15
+
+struct ar5416AniState {
+	struct ath9k_channel c;
+	u8 noiseImmunityLevel;
+	u8 spurImmunityLevel;
+	u8 firstepLevel;
+	u8 ofdmWeakSigDetectOff;
+	u8 cckWeakSigThreshold;
+	u32 listenTime;
+	u32 ofdmTrigHigh;
+	u32 ofdmTrigLow;
+	int32_t cckTrigHigh;
+	int32_t cckTrigLow;
+	int32_t rssiThrLow;
+	int32_t rssiThrHigh;
+	u32 noiseFloor;
+	u32 txFrameCount;
+	u32 rxFrameCount;
+	u32 cycleCount;
+	u32 ofdmPhyErrCount;
+	u32 cckPhyErrCount;
+	u32 ofdmPhyErrBase;
+	u32 cckPhyErrBase;
+	int16_t pktRssi[2];
+	int16_t ofdmErrRssi[2];
+	int16_t cckErrRssi[2];
+};
+
+#define HAL_PROCESS_ANI     0x00000001
+#define HAL_RADAR_EN        0x80000000
+#define HAL_AR_EN           0x40000000
+
+#define DO_ANI(ah) \
+    ((AH5416(ah)->ah_procPhyErr & HAL_PROCESS_ANI))
+
+struct ar5416Stats {
+	u32 ast_ani_niup;
+	u32 ast_ani_nidown;
+	u32 ast_ani_spurup;
+	u32 ast_ani_spurdown;
+	u32 ast_ani_ofdmon;
+	u32 ast_ani_ofdmoff;
+	u32 ast_ani_cckhigh;
+	u32 ast_ani_ccklow;
+	u32 ast_ani_stepup;
+	u32 ast_ani_stepdown;
+	u32 ast_ani_ofdmerrs;
+	u32 ast_ani_cckerrs;
+	u32 ast_ani_reset;
+	u32 ast_ani_lzero;
+	u32 ast_ani_lneg;
+	struct ath9k_mib_stats ast_mibstats;
+	struct ath9k_node_stats ast_nodestats;
+};
+
+#define AR5416_OPFLAGS_11A           0x01
+#define AR5416_OPFLAGS_11G           0x02
+#define AR5416_OPFLAGS_N_5G_HT40     0x04
+#define AR5416_OPFLAGS_N_2G_HT40     0x08
+#define AR5416_OPFLAGS_N_5G_HT20     0x10
+#define AR5416_OPFLAGS_N_2G_HT20     0x20
+
+#define EEP_RFSILENT_ENABLED        0x0001
+#define EEP_RFSILENT_ENABLED_S      0
+#define EEP_RFSILENT_POLARITY       0x0002
+#define EEP_RFSILENT_POLARITY_S     1
+#define EEP_RFSILENT_GPIO_SEL       0x001c
+#define EEP_RFSILENT_GPIO_SEL_S     2
+
+#define AR5416_EEP_NO_BACK_VER       0x1
+#define AR5416_EEP_VER               0xE
+#define AR5416_EEP_VER_MINOR_MASK    0x0FFF
+#define AR5416_EEP_MINOR_VER_2       0x2
+#define AR5416_EEP_MINOR_VER_3       0x3
+#define AR5416_EEP_MINOR_VER_7       0x7
+#define AR5416_EEP_MINOR_VER_9       0x9
+
+#define AR5416_EEP_START_LOC            256
+#define AR5416_NUM_5G_CAL_PIERS         8
+#define AR5416_NUM_2G_CAL_PIERS         4
+#define AR5416_NUM_5G_20_TARGET_POWERS  8
+#define AR5416_NUM_5G_40_TARGET_POWERS  8
+#define AR5416_NUM_2G_CCK_TARGET_POWERS 3
+#define AR5416_NUM_2G_20_TARGET_POWERS  4
+#define AR5416_NUM_2G_40_TARGET_POWERS  4
+#define AR5416_NUM_CTLS                 24
+#define AR5416_NUM_BAND_EDGES           8
+#define AR5416_NUM_PD_GAINS             4
+#define AR5416_PD_GAINS_IN_MASK         4
+#define AR5416_PD_GAIN_ICEPTS           5
+#define AR5416_EEPROM_MODAL_SPURS       5
+#define AR5416_MAX_RATE_POWER           63
+#define AR5416_NUM_PDADC_VALUES         128
+#define AR5416_NUM_RATES                16
+#define AR5416_BCHAN_UNUSED             0xFF
+#define AR5416_MAX_PWR_RANGE_IN_HALF_DB 64
+#define AR5416_EEPMISC_BIG_ENDIAN       0x01
+#define AR5416_MAX_CHAINS               3
+#define AR5416_ANT_16S                  25
+
+#define AR5416_NUM_ANT_CHAIN_FIELDS     7
+#define AR5416_NUM_ANT_COMMON_FIELDS    4
+#define AR5416_SIZE_ANT_CHAIN_FIELD     3
+#define AR5416_SIZE_ANT_COMMON_FIELD    4
+#define AR5416_ANT_CHAIN_MASK           0x7
+#define AR5416_ANT_COMMON_MASK          0xf
+#define AR5416_CHAIN_0_IDX              0
+#define AR5416_CHAIN_1_IDX              1
+#define AR5416_CHAIN_2_IDX              2
+
+#define AR5416_PWR_TABLE_OFFSET         -5
+#define AR5416_LEGACY_CHAINMASK         1
+
+enum eeprom_param {
+	EEP_NFTHRESH_5,
+	EEP_NFTHRESH_2,
+	EEP_MAC_MSW,
+	EEP_MAC_MID,
+	EEP_MAC_LSW,
+	EEP_REG_0,
+	EEP_REG_1,
+	EEP_OP_CAP,
+	EEP_OP_MODE,
+	EEP_RF_SILENT,
+	EEP_OB_5,
+	EEP_DB_5,
+	EEP_OB_2,
+	EEP_DB_2,
+	EEP_MINOR_REV,
+	EEP_TX_MASK,
+	EEP_RX_MASK,
+};
+
+enum ar5416_rates {
+	rate6mb, rate9mb, rate12mb, rate18mb,
+	rate24mb, rate36mb, rate48mb, rate54mb,
+	rate1l, rate2l, rate2s, rate5_5l,
+	rate5_5s, rate11l, rate11s, rateXr,
+	rateHt20_0, rateHt20_1, rateHt20_2, rateHt20_3,
+	rateHt20_4, rateHt20_5, rateHt20_6, rateHt20_7,
+	rateHt40_0, rateHt40_1, rateHt40_2, rateHt40_3,
+	rateHt40_4, rateHt40_5, rateHt40_6, rateHt40_7,
+	rateDupCck, rateDupOfdm, rateExtCck, rateExtOfdm,
+	Ar5416RateSize
+};
+
+struct base_eep_header {
+	u16 length;
+	u16 checksum;
+	u16 version;
+	u8 opCapFlags;
+	u8 eepMisc;
+	u16 regDmn[2];
+	u8 macAddr[6];
+	u8 rxMask;
+	u8 txMask;
+	u16 rfSilent;
+	u16 blueToothOptions;
+	u16 deviceCap;
+	u32 binBuildNumber;
+	u8 deviceType;
+	u8 pwdclkind;
+	u8 futureBase[32];
+} __packed;
+
+struct spur_chan {
+	u16 spurChan;
+	u8 spurRangeLow;
+	u8 spurRangeHigh;
+} __packed;
+
+struct modal_eep_header {
+	u32 antCtrlChain[AR5416_MAX_CHAINS];
+	u32 antCtrlCommon;
+	u8 antennaGainCh[AR5416_MAX_CHAINS];
+	u8 switchSettling;
+	u8 txRxAttenCh[AR5416_MAX_CHAINS];
+	u8 rxTxMarginCh[AR5416_MAX_CHAINS];
+	u8 adcDesiredSize;
+	u8 pgaDesiredSize;
+	u8 xlnaGainCh[AR5416_MAX_CHAINS];
+	u8 txEndToXpaOff;
+	u8 txEndToRxOn;
+	u8 txFrameToXpaOn;
+	u8 thresh62;
+	u8 noiseFloorThreshCh[AR5416_MAX_CHAINS];
+	u8 xpdGain;
+	u8 xpd;
+	u8 iqCalICh[AR5416_MAX_CHAINS];
+	u8 iqCalQCh[AR5416_MAX_CHAINS];
+	u8 pdGainOverlap;
+	u8 ob;
+	u8 db;
+	u8 xpaBiasLvl;
+	u8 pwrDecreaseFor2Chain;
+	u8 pwrDecreaseFor3Chain;
+	u8 txFrameToDataStart;
+	u8 txFrameToPaOn;
+	u8 ht40PowerIncForPdadc;
+	u8 bswAtten[AR5416_MAX_CHAINS];
+	u8 bswMargin[AR5416_MAX_CHAINS];
+	u8 swSettleHt40;
+	u8 xatten2Db[AR5416_MAX_CHAINS];
+	u8 xatten2Margin[AR5416_MAX_CHAINS];
+	u8 ob_ch1;
+	u8 db_ch1;
+	u8 useAnt1:1,
+	    force_xpaon:1,
+	    local_bias:1,
+	    femBandSelectUsed:1, xlnabufin:1, xlnaisel:2, xlnabufmode:1;
+	u8 futureModalar9280;
+	u16 xpaBiasLvlFreq[3];
+	u8 futureModal[6];
+
+	struct spur_chan spurChans[AR5416_EEPROM_MODAL_SPURS];
+} __packed;
+
+struct cal_data_per_freq {
+	u8 pwrPdg[AR5416_NUM_PD_GAINS][AR5416_PD_GAIN_ICEPTS];
+	u8 vpdPdg[AR5416_NUM_PD_GAINS][AR5416_PD_GAIN_ICEPTS];
+} __packed;
+
+struct cal_target_power_leg {
+	u8 bChannel;
+	u8 tPow2x[4];
+} __packed;
+
+struct cal_target_power_ht {
+	u8 bChannel;
+	u8 tPow2x[8];
+} __packed;
+
+#ifdef __BIG_ENDIAN_BITFIELD
+struct cal_ctl_edges {
+	u8 bChannel;
+	u8 flag:2, tPower:6;
+} __packed;
+#else
+struct cal_ctl_edges {
+	u8 bChannel;
+	u8 tPower:6, flag:2;
+} __packed;
+#endif
+
+struct cal_ctl_data {
+	struct cal_ctl_edges
+	 ctlEdges[AR5416_MAX_CHAINS][AR5416_NUM_BAND_EDGES];
+} __packed;
+
+struct ar5416_eeprom {
+	struct base_eep_header baseEepHeader;
+	u8 custData[64];
+	struct modal_eep_header modalHeader[2];
+	u8 calFreqPier5G[AR5416_NUM_5G_CAL_PIERS];
+	u8 calFreqPier2G[AR5416_NUM_2G_CAL_PIERS];
+	struct cal_data_per_freq
+	 calPierData5G[AR5416_MAX_CHAINS][AR5416_NUM_5G_CAL_PIERS];
+	struct cal_data_per_freq
+	 calPierData2G[AR5416_MAX_CHAINS][AR5416_NUM_2G_CAL_PIERS];
+	struct cal_target_power_leg
+	 calTargetPower5G[AR5416_NUM_5G_20_TARGET_POWERS];
+	struct cal_target_power_ht
+	 calTargetPower5GHT20[AR5416_NUM_5G_20_TARGET_POWERS];
+	struct cal_target_power_ht
+	 calTargetPower5GHT40[AR5416_NUM_5G_40_TARGET_POWERS];
+	struct cal_target_power_leg
+	 calTargetPowerCck[AR5416_NUM_2G_CCK_TARGET_POWERS];
+	struct cal_target_power_leg
+	 calTargetPower2G[AR5416_NUM_2G_20_TARGET_POWERS];
+	struct cal_target_power_ht
+	 calTargetPower2GHT20[AR5416_NUM_2G_20_TARGET_POWERS];
+	struct cal_target_power_ht
+	 calTargetPower2GHT40[AR5416_NUM_2G_40_TARGET_POWERS];
+	u8 ctlIndex[AR5416_NUM_CTLS];
+	struct cal_ctl_data ctlData[AR5416_NUM_CTLS];
+	u8 padding;
+} __packed;
+
+struct ar5416IniArray {
+	u32 *ia_array;
+	u32 ia_rows;
+	u32 ia_columns;
+};
+
+#define INIT_INI_ARRAY(iniarray, array, rows, columns) do {	\
+		(iniarray)->ia_array = (u32 *)(array);    \
+		(iniarray)->ia_rows = (rows);			\
+		(iniarray)->ia_columns = (columns);		\
+	} while (0)
+
+#define INI_RA(iniarray, row, column) \
+	(((iniarray)->ia_array)[(row) *	((iniarray)->ia_columns) + (column)])
+
+#define INIT_CAL(_perCal) do { \
+		(_perCal)->calState = CAL_WAITING; \
+		(_perCal)->calNext = NULL; \
+	} while (0)
+
+#define INSERT_CAL(_ahp, _perCal)					\
+	do {								\
+		if ((_ahp)->ah_cal_list_last == NULL) {			\
+			(_ahp)->ah_cal_list = \
+				(_ahp)->ah_cal_list_last = (_perCal); \
+			((_ahp)->ah_cal_list_last)->calNext = (_perCal); \
+		} else {						\
+			((_ahp)->ah_cal_list_last)->calNext = (_perCal); \
+			(_ahp)->ah_cal_list_last = (_perCal);		\
+			(_perCal)->calNext = (_ahp)->ah_cal_list;	\
+		}							\
+	} while (0)
+
+enum hal_cal_types {
+	ADC_DC_INIT_CAL = 0x1,
+	ADC_GAIN_CAL = 0x2,
+	ADC_DC_CAL = 0x4,
+	IQ_MISMATCH_CAL = 0x8
+};
+
+enum hal_cal_state {
+	CAL_INACTIVE,
+	CAL_WAITING,
+	CAL_RUNNING,
+	CAL_DONE
+};
+
+#define MIN_CAL_SAMPLES     1
+#define MAX_CAL_SAMPLES    64
+#define INIT_LOG_COUNT      5
+#define PER_MIN_LOG_COUNT   2
+#define PER_MAX_LOG_COUNT  10
+
+struct hal_percal_data {
+	enum hal_cal_types calType;
+	u32 calNumSamples;
+	u32 calCountMax;
+	void (*calCollect) (struct ath_hal *);
+	void (*calPostProc) (struct ath_hal *, u8);
+};
+
+struct hal_cal_list {
+	const struct hal_percal_data *calData;
+	enum hal_cal_state calState;
+	struct hal_cal_list *calNext;
+};
+
+struct ath_hal_5416 {
+	struct ath_hal ah;
+	struct ar5416_eeprom ah_eeprom;
+	u8 ah_macaddr[ETH_ALEN];
+	u8 ah_bssid[ETH_ALEN];
+	u8 ah_bssidmask[ETH_ALEN];
+	u16 ah_assocId;
+	int16_t ah_curchanRadIndex;
+	u32 ah_maskReg;
+	struct ar5416Stats ah_stats;
+	u32 ah_txDescMask;
+	u32 ah_txOkInterruptMask;
+	u32 ah_txErrInterruptMask;
+	u32 ah_txDescInterruptMask;
+	u32 ah_txEolInterruptMask;
+	u32 ah_txUrnInterruptMask;
+	struct ath9k_tx_queue_info ah_txq[ATH9K_NUM_TX_QUEUES];
+	enum ath9k_power_mode ah_powerMode;
+	bool ah_chipFullSleep;
+	u32 ah_atimWindow;
+	enum ath9k_ant_setting ah_diversityControl;
+	u16 ah_antennaSwitchSwap;
+	enum hal_cal_types ah_suppCals;
+	struct hal_cal_list ah_iqCalData;
+	struct hal_cal_list ah_adcGainCalData;
+	struct hal_cal_list ah_adcDcCalInitData;
+	struct hal_cal_list ah_adcDcCalData;
+	struct hal_cal_list *ah_cal_list;
+	struct hal_cal_list *ah_cal_list_last;
+	struct hal_cal_list *ah_cal_list_curr;
+#define ah_totalPowerMeasI ah_Meas0.unsign
+#define ah_totalPowerMeasQ ah_Meas1.unsign
+#define ah_totalIqCorrMeas ah_Meas2.sign
+#define ah_totalAdcIOddPhase  ah_Meas0.unsign
+#define ah_totalAdcIEvenPhase ah_Meas1.unsign
+#define ah_totalAdcQOddPhase  ah_Meas2.unsign
+#define ah_totalAdcQEvenPhase ah_Meas3.unsign
+#define ah_totalAdcDcOffsetIOddPhase  ah_Meas0.sign
+#define ah_totalAdcDcOffsetIEvenPhase ah_Meas1.sign
+#define ah_totalAdcDcOffsetQOddPhase  ah_Meas2.sign
+#define ah_totalAdcDcOffsetQEvenPhase ah_Meas3.sign
+	union {
+		u32 unsign[AR5416_MAX_CHAINS];
+		int32_t sign[AR5416_MAX_CHAINS];
+	} ah_Meas0;
+	union {
+		u32 unsign[AR5416_MAX_CHAINS];
+		int32_t sign[AR5416_MAX_CHAINS];
+	} ah_Meas1;
+	union {
+		u32 unsign[AR5416_MAX_CHAINS];
+		int32_t sign[AR5416_MAX_CHAINS];
+	} ah_Meas2;
+	union {
+		u32 unsign[AR5416_MAX_CHAINS];
+		int32_t sign[AR5416_MAX_CHAINS];
+	} ah_Meas3;
+	u16 ah_CalSamples;
+	u32 ah_tx6PowerInHalfDbm;
+	u32 ah_staId1Defaults;
+	u32 ah_miscMode;
+	bool ah_tpcEnabled;
+	u32 ah_beaconInterval;
+	enum {
+		AUTO_32KHZ,
+		USE_32KHZ,
+		DONT_USE_32KHZ,
+	} ah_enable32kHzClock;
+	u32 *ah_analogBank0Data;
+	u32 *ah_analogBank1Data;
+	u32 *ah_analogBank2Data;
+	u32 *ah_analogBank3Data;
+	u32 *ah_analogBank6Data;
+	u32 *ah_analogBank6TPCData;
+	u32 *ah_analogBank7Data;
+	u32 *ah_addac5416_21;
+	u32 *ah_bank6Temp;
+	u32 ah_ofdmTxPower;
+	int16_t ah_txPowerIndexOffset;
+	u32 ah_slottime;
+	u32 ah_acktimeout;
+	u32 ah_ctstimeout;
+	u32 ah_globaltxtimeout;
+	u8 ah_gBeaconRate;
+	u32 ah_gpioSelect;
+	u32 ah_polarity;
+	u32 ah_gpioBit;
+	bool ah_eepEnabled;
+	u32 ah_procPhyErr;
+	bool ah_hasHwPhyCounters;
+	u32 ah_aniPeriod;
+	struct ar5416AniState *ah_curani;
+	struct ar5416AniState ah_ani[255];
+	int ah_totalSizeDesired[5];
+	int ah_coarseHigh[5];
+	int ah_coarseLow[5];
+	int ah_firpwr[5];
+	u16 ah_ratesArray[16];
+	u32 ah_intrTxqs;
+	bool ah_intrMitigation;
+	u32 ah_cycleCount;
+	u32 ah_ctlBusy;
+	u32 ah_extBusy;
+	enum ath9k_ht_extprotspacing ah_extprotspacing;
+	u8 ah_txchainmask;
+	u8 ah_rxchainmask;
+	int ah_hwp;
+	void __iomem *ah_cal_mem;
+	enum ath9k_ani_cmd ah_ani_function;
+	struct ar5416IniArray ah_iniModes;
+	struct ar5416IniArray ah_iniCommon;
+	struct ar5416IniArray ah_iniBank0;
+	struct ar5416IniArray ah_iniBB_RfGain;
+	struct ar5416IniArray ah_iniBank1;
+	struct ar5416IniArray ah_iniBank2;
+	struct ar5416IniArray ah_iniBank3;
+	struct ar5416IniArray ah_iniBank6;
+	struct ar5416IniArray ah_iniBank6TPC;
+	struct ar5416IniArray ah_iniBank7;
+	struct ar5416IniArray ah_iniAddac;
+	struct ar5416IniArray ah_iniPcieSerdes;
+	struct ar5416IniArray ah_iniModesAdditional;
+};
+#define AH5416(_ah) ((struct ath_hal_5416 *)(_ah))
+
+#define FREQ2FBIN(x, y) ((y) ? ((x) - 2300) : (((x) - 4800) / 5))
+
+#define IS_5416_EMU(ah)					\
+	((ah->ah_devid == AR5416_DEVID_EMU) ||		\
+	 (ah->ah_devid == AR5416_DEVID_EMU_PCIE))
+
+#define ar5416RfDetach(ah) do {					\
+		if (AH5416(ah)->ah_rfHal.rfDetach != NULL)	\
+			AH5416(ah)->ah_rfHal.rfDetach(ah);	\
+	} while (0)
+
+#define ath9k_hw_use_flash(_ah)			\
+	(!(_ah->ah_flags & AH_USE_EEPROM))
+
+
+#define DO_DELAY(x) do {			\
+		if ((++(x) % 64) == 0)          \
+			udelay(1);		\
+	} while (0)
+
+#define REG_WRITE_ARRAY(iniarray, column, regWr) do {                   \
+		int r;							\
+		for (r = 0; r < ((iniarray)->ia_rows); r++) {		\
+			REG_WRITE(ah, INI_RA((iniarray), (r), 0), \
+				INI_RA((iniarray), r, (column))); \
+			DO_DELAY(regWr);				\
+		}							\
+	} while (0)
+
+#define BASE_ACTIVATE_DELAY         100
+#define RTC_PLL_SETTLE_DELAY        1000
+#define COEF_SCALE_S                24
+#define HT40_CHANNEL_CENTER_SHIFT   10
+
+#define ar5416CheckOpMode(_opmode)					\
+	((_opmode == ATH9K_M_STA) || (_opmode == ATH9K_M_IBSS) ||	\
+	 (_opmode == ATH9K_M_HOSTAP) || (_opmode == ATH9K_M_MONITOR))
+
+#define AR5416_EEPROM_MAGIC_OFFSET  0x0
+
+#define AR5416_EEPROM_S             2
+#define AR5416_EEPROM_OFFSET        0x2000
+#define AR5416_EEPROM_START_ADDR			\
+	(AR_SREV_9100(ah)) ? 0x1fff1000 : 0x503f1200
+#define AR5416_EEPROM_MAX           0xae0
+#define ar5416_get_eep_ver(_ahp)				\
+	(((_ahp)->ah_eeprom.baseEepHeader.version >> 12) & 0xF)
+#define ar5416_get_eep_rev(_ahp)				\
+	(((_ahp)->ah_eeprom.baseEepHeader.version) & 0xFFF)
+#define ar5416_get_ntxchains(_txchainmask)				\
+	(((_txchainmask >> 2) & 1) + \
+		((_txchainmask >> 1) & 1) + (_txchainmask & 1))
+
+#define IS_EEP_MINOR_V3(_ahp) \
+	(ath9k_hw_get_eeprom((_ahp), EEP_MINOR_REV)  >= AR5416_EEP_MINOR_VER_3)
+
+#define FIXED_CCA_THRESHOLD 15
+
+#ifdef __BIG_ENDIAN
+#define AR5416_EEPROM_MAGIC 0x5aa5
+#else
+#define AR5416_EEPROM_MAGIC 0xa55a
+#endif
+
+#define ATH9K_POW_SM(_r, _s)     (((_r) & 0x3f) << (_s))
+
+#define ATH9K_ANTENNA0_CHAINMASK        0x1
+#define ATH9K_ANTENNA1_CHAINMASK        0x2
+
+#define ATH9K_NUM_DMA_DEBUG_REGS        8
+#define ATH9K_NUM_QUEUES                10
+
+#define HAL_NOISE_IMMUNE_MAX            4
+#define HAL_SPUR_IMMUNE_MAX             7
+#define HAL_FIRST_STEP_MAX              2
+
+#define ATH9K_ANI_OFDM_TRIG_HIGH          500
+#define ATH9K_ANI_OFDM_TRIG_LOW           200
+#define ATH9K_ANI_CCK_TRIG_HIGH           200
+#define ATH9K_ANI_CCK_TRIG_LOW            100
+#define ATH9K_ANI_NOISE_IMMUNE_LVL        4
+#define ATH9K_ANI_USE_OFDM_WEAK_SIG       true
+#define ATH9K_ANI_CCK_WEAK_SIG_THR        false
+#define ATH9K_ANI_SPUR_IMMUNE_LVL         7
+#define ATH9K_ANI_FIRSTEP_LVL             0
+#define ATH9K_ANI_RSSI_THR_HIGH           40
+#define ATH9K_ANI_RSSI_THR_LOW            7
+#define ATH9K_ANI_PERIOD                  100
+
+#define AR_GPIOD_MASK                   0x00001FFF
+#define AR_GPIO_BIT(_gpio)              (1 << (_gpio))
+
+#define MAX_ANALOG_START                319
+
+#define HAL_EP_RND(x, mul) \
+	((((x)%(mul)) >= ((mul)/2)) ? ((x) + ((mul) - 1)) / (mul) : (x)/(mul))
+#define BEACON_RSSI(ahp) \
+	HAL_EP_RND(ahp->ah_stats.ast_nodestats.ns_avgbrssi, \
+		ATH9K_RSSI_EP_MULTIPLIER)
+
+#define ah_mibStats     ah_stats.ast_mibstats
+
+#define AH_TIMEOUT         100000
+#define AH_TIME_QUANTUM        10
+
+#define IS(_c, _f)       (((_c)->channelFlags & _f) || 0)
+
+#define AR_KEYTABLE_SIZE 128
+#define POWER_UP_TIME    200000
+
+#define EXT_ADDITIVE (0x8000)
+#define CTL_11A_EXT (CTL_11A | EXT_ADDITIVE)
+#define CTL_11G_EXT (CTL_11G | EXT_ADDITIVE)
+#define CTL_11B_EXT (CTL_11B | EXT_ADDITIVE)
+
+#define SUB_NUM_CTL_MODES_AT_5G_40 2
+#define SUB_NUM_CTL_MODES_AT_2G_40 3
+#define SPUR_RSSI_THRESH 40
+
+#define TU_TO_USEC(_tu)         ((_tu) << 10)
+
+#define CAB_TIMEOUT_VAL         10
+#define BEACON_TIMEOUT_VAL      10
+#define MIN_BEACON_TIMEOUT_VAL   1
+#define SLEEP_SLOP               3
+
+#define CCK_SIFS_TIME        10
+#define CCK_PREAMBLE_BITS   144
+#define CCK_PLCP_BITS        48
+
+#define OFDM_SIFS_TIME        16
+#define OFDM_PREAMBLE_TIME    20
+#define OFDM_PLCP_BITS        22
+#define OFDM_SYMBOL_TIME      4
+
+#define OFDM_SIFS_TIME_HALF     32
+#define OFDM_PREAMBLE_TIME_HALF 40
+#define OFDM_PLCP_BITS_HALF     22
+#define OFDM_SYMBOL_TIME_HALF   8
+
+#define OFDM_SIFS_TIME_QUARTER      64
+#define OFDM_PREAMBLE_TIME_QUARTER  80
+#define OFDM_PLCP_BITS_QUARTER      22
+#define OFDM_SYMBOL_TIME_QUARTER    16
+
+u32 ath9k_hw_get_eeprom(struct ath_hal_5416 *ahp,
+			      enum eeprom_param param);
+
+#endif
diff --git a/drivers/net/wireless/ath9k/initvals.h b/drivers/net/wireless/ath9k/initvals.h
new file mode 100644
index 000000000000..3dd3815940a4
--- /dev/null
+++ b/drivers/net/wireless/ath9k/initvals.h
@@ -0,0 +1,3146 @@
+/*
+ * Copyright (c) 2008 Atheros Communications Inc.
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+static const u32 ar5416Modes_9100[][6] = {
+    { 0x00001030, 0x00000230, 0x00000460, 0x000002c0, 0x00000160, 0x000001e0 },
+    { 0x00001070, 0x00000168, 0x000002d0, 0x00000318, 0x0000018c, 0x000001e0 },
+    { 0x000010b0, 0x00000e60, 0x00001cc0, 0x00007c70, 0x00003e38, 0x00001180 },
+    { 0x000010f0, 0x0000a000, 0x00014000, 0x00016000, 0x0000b000, 0x00014008 },
+    { 0x00008014, 0x03e803e8, 0x07d007d0, 0x10801600, 0x08400b00, 0x06e006e0 },
+    { 0x0000801c, 0x128d93a7, 0x128d93cf, 0x12e013d7, 0x12e013ab, 0x098813cf },
+    { 0x00009804, 0x00000300, 0x000003c4, 0x000003c4, 0x00000300, 0x00000303 },
+    { 0x00009820, 0x02020200, 0x02020200, 0x02020200, 0x02020200, 0x02020200 },
+    { 0x00009824, 0x00000e0e, 0x00000e0e, 0x00000e0e, 0x00000e0e, 0x00000e0e },
+    { 0x00009828, 0x0a020001, 0x0a020001, 0x0a020001, 0x0a020001, 0x0a020001 },
+    { 0x00009834, 0x00000e0e, 0x00000e0e, 0x00000e0e, 0x00000e0e, 0x00000e0e },
+    { 0x00009838, 0x00000007, 0x00000007, 0x00000007, 0x00000007, 0x00000007 },
+    { 0x00009844, 0x1372161e, 0x1372161e, 0x137216a0, 0x137216a0, 0x137216a0 },
+    { 0x00009848, 0x001a6a65, 0x001a6a65, 0x00197a68, 0x00197a68, 0x00197a68 },
+    { 0x0000a848, 0x001a6a65, 0x001a6a65, 0x00197a68, 0x00197a68, 0x00197a68 },
+    { 0x0000b848, 0x001a6a65, 0x001a6a65, 0x00197a68, 0x00197a68, 0x00197a68 },
+    { 0x00009850, 0x6de8b4e0, 0x6de8b4e0, 0x6de8b0de, 0x6de8b0de, 0x6de8b0de },
+    { 0x00009858, 0x7ec82d2e, 0x7ec82d2e, 0x7ec82d2e, 0x7ec82d2e, 0x7ec82d2e },
+    { 0x0000985c, 0x3139605e, 0x3139605e, 0x3139605e, 0x3139605e, 0x3139605e },
+    { 0x00009860, 0x00049d18, 0x00049d18, 0x00049d18, 0x00049d18, 0x00049d18 },
+    { 0x0000c864, 0x0001ce00, 0x0001ce00, 0x0001ce00, 0x0001ce00, 0x0001ce00 },
+    { 0x00009868, 0x409a4190, 0x409a4190, 0x409a4190, 0x409a4190, 0x409a4190 },
+    { 0x0000986c, 0x050cb081, 0x050cb081, 0x050cb081, 0x050cb081, 0x050cb081 },
+    { 0x00009914, 0x000007d0, 0x000007d0, 0x00000898, 0x00000898, 0x000007d0 },
+    { 0x00009918, 0x000001b8, 0x00000370, 0x00000268, 0x00000134, 0x00000134 },
+    { 0x00009924, 0xd0058a0b, 0xd0058a0b, 0xd0058a0b, 0xd0058a0b, 0xd0058a0b },
+    { 0x00009944, 0xdfb81020, 0xdfb81020, 0xdfb81020, 0xdfb81020, 0xdfb81020 },
+    { 0x00009960, 0x00000900, 0x00000900, 0x00012d80, 0x00012d80, 0x00012d80 },
+    { 0x0000a960, 0x00000900, 0x00000900, 0x00012d80, 0x00012d80, 0x00012d80 },
+    { 0x0000b960, 0x00000900, 0x00000900, 0x00012d80, 0x00012d80, 0x00012d80 },
+    { 0x00009964, 0x00000000, 0x00000000, 0x00001120, 0x00001120, 0x00001120 },
+    { 0x0000c9bc, 0x001a0a00, 0x001a0a00, 0x001a0a00, 0x001a0a00, 0x001a0a00 },
+    { 0x000099c0, 0x038919be, 0x038919be, 0x038919be, 0x038919be, 0x038919be },
+    { 0x000099c4, 0x06336f77, 0x06336f77, 0x06336f77, 0x06336f77, 0x06336f77 },
+    { 0x000099c8, 0x60f6532c, 0x60f6532c, 0x60f6532c, 0x60f6532c, 0x60f6532c },
+    { 0x000099cc, 0x08f186c8, 0x08f186c8, 0x08f186c8, 0x08f186c8, 0x08f186c8 },
+    { 0x000099d0, 0x00046384, 0x00046384, 0x00046384, 0x00046384, 0x00046384 },
+    { 0x000099d4, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 },
+    { 0x000099d8, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 },
+    { 0x0000a204, 0x00000880, 0x00000880, 0x00000880, 0x00000880, 0x00000880 },
+    { 0x0000a208, 0xd6be4788, 0xd6be4788, 0xd03e4788, 0xd03e4788, 0xd03e4788 },
+    { 0x0000a20c, 0x002ec1e0, 0x002ec1e0, 0x002ac120, 0x002ac120, 0x002ac120 },
+    { 0x0000b20c, 0x002ec1e0, 0x002ec1e0, 0x002ac120, 0x002ac120, 0x002ac120 },
+    { 0x0000c20c, 0x002ec1e0, 0x002ec1e0, 0x002ac120, 0x002ac120, 0x002ac120 },
+    { 0x0000a21c, 0x1883800a, 0x1883800a, 0x1883800a, 0x1883800a, 0x1883800a },
+    { 0x0000a230, 0x00000000, 0x00000000, 0x00000210, 0x00000108, 0x00000000 },
+    { 0x0000a274, 0x0a1a9caa, 0x0a1a9caa, 0x0a1a7caa, 0x0a1a7caa, 0x0a1a7caa },
+    { 0x0000a300, 0x18010000, 0x18010000, 0x18010000, 0x18010000, 0x18010000 },
+    { 0x0000a304, 0x30032602, 0x30032602, 0x2e032402, 0x2e032402, 0x2e032402 },
+    { 0x0000a308, 0x48073e06, 0x48073e06, 0x4a0a3c06, 0x4a0a3c06, 0x4a0a3c06 },
+    { 0x0000a30c, 0x560b4c0a, 0x560b4c0a, 0x621a540b, 0x621a540b, 0x621a540b },
+    { 0x0000a310, 0x641a600f, 0x641a600f, 0x764f6c1b, 0x764f6c1b, 0x764f6c1b },
+    { 0x0000a314, 0x7a4f6e1b, 0x7a4f6e1b, 0x845b7a5a, 0x845b7a5a, 0x845b7a5a },
+    { 0x0000a318, 0x8c5b7e5a, 0x8c5b7e5a, 0x950f8ccf, 0x950f8ccf, 0x950f8ccf },
+    { 0x0000a31c, 0x9d0f96cf, 0x9d0f96cf, 0xa5cf9b4f, 0xa5cf9b4f, 0xa5cf9b4f },
+    { 0x0000a320, 0xb51fa69f, 0xb51fa69f, 0xbddfaf1f, 0xbddfaf1f, 0xbddfaf1f },
+    { 0x0000a324, 0xcb3fbd07, 0xcb3fbcbf, 0xd1ffc93f, 0xd1ffc93f, 0xd1ffc93f },
+    { 0x0000a328, 0x0000d7bf, 0x0000d7bf, 0x00000000, 0x00000000, 0x00000000 },
+    { 0x0000a32c, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 },
+    { 0x0000a330, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 },
+    { 0x0000a334, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 },
+};
+
+static const u32 ar5416Common_9100[][2] = {
+    { 0x0000000c, 0x00000000 },
+    { 0x00000030, 0x00020015 },
+    { 0x00000034, 0x00000005 },
+    { 0x00000040, 0x00000000 },
+    { 0x00000044, 0x00000008 },
+    { 0x00000048, 0x00000008 },
+    { 0x0000004c, 0x00000010 },
+    { 0x00000050, 0x00000000 },
+    { 0x00000054, 0x0000001f },
+    { 0x00000800, 0x00000000 },
+    { 0x00000804, 0x00000000 },
+    { 0x00000808, 0x00000000 },
+    { 0x0000080c, 0x00000000 },
+    { 0x00000810, 0x00000000 },
+    { 0x00000814, 0x00000000 },
+    { 0x00000818, 0x00000000 },
+    { 0x0000081c, 0x00000000 },
+    { 0x00000820, 0x00000000 },
+    { 0x00000824, 0x00000000 },
+    { 0x00001040, 0x002ffc0f },
+    { 0x00001044, 0x002ffc0f },
+    { 0x00001048, 0x002ffc0f },
+    { 0x0000104c, 0x002ffc0f },
+    { 0x00001050, 0x002ffc0f },
+    { 0x00001054, 0x002ffc0f },
+    { 0x00001058, 0x002ffc0f },
+    { 0x0000105c, 0x002ffc0f },
+    { 0x00001060, 0x002ffc0f },
+    { 0x00001064, 0x002ffc0f },
+    { 0x00001230, 0x00000000 },
+    { 0x00001270, 0x00000000 },
+    { 0x00001038, 0x00000000 },
+    { 0x00001078, 0x00000000 },
+    { 0x000010b8, 0x00000000 },
+    { 0x000010f8, 0x00000000 },
+    { 0x00001138, 0x00000000 },
+    { 0x00001178, 0x00000000 },
+    { 0x000011b8, 0x00000000 },
+    { 0x000011f8, 0x00000000 },
+    { 0x00001238, 0x00000000 },
+    { 0x00001278, 0x00000000 },
+    { 0x000012b8, 0x00000000 },
+    { 0x000012f8, 0x00000000 },
+    { 0x00001338, 0x00000000 },
+    { 0x00001378, 0x00000000 },
+    { 0x000013b8, 0x00000000 },
+    { 0x000013f8, 0x00000000 },
+    { 0x00001438, 0x00000000 },
+    { 0x00001478, 0x00000000 },
+    { 0x000014b8, 0x00000000 },
+    { 0x000014f8, 0x00000000 },
+    { 0x00001538, 0x00000000 },
+    { 0x00001578, 0x00000000 },
+    { 0x000015b8, 0x00000000 },
+    { 0x000015f8, 0x00000000 },
+    { 0x00001638, 0x00000000 },
+    { 0x00001678, 0x00000000 },
+    { 0x000016b8, 0x00000000 },
+    { 0x000016f8, 0x00000000 },
+    { 0x00001738, 0x00000000 },
+    { 0x00001778, 0x00000000 },
+    { 0x000017b8, 0x00000000 },
+    { 0x000017f8, 0x00000000 },
+    { 0x0000103c, 0x00000000 },
+    { 0x0000107c, 0x00000000 },
+    { 0x000010bc, 0x00000000 },
+    { 0x000010fc, 0x00000000 },
+    { 0x0000113c, 0x00000000 },
+    { 0x0000117c, 0x00000000 },
+    { 0x000011bc, 0x00000000 },
+    { 0x000011fc, 0x00000000 },
+    { 0x0000123c, 0x00000000 },
+    { 0x0000127c, 0x00000000 },
+    { 0x000012bc, 0x00000000 },
+    { 0x000012fc, 0x00000000 },
+    { 0x0000133c, 0x00000000 },
+    { 0x0000137c, 0x00000000 },
+    { 0x000013bc, 0x00000000 },
+    { 0x000013fc, 0x00000000 },
+    { 0x0000143c, 0x00000000 },
+    { 0x0000147c, 0x00000000 },
+    { 0x00004030, 0x00000002 },
+    { 0x0000403c, 0x00000002 },
+    { 0x00007010, 0x00000000 },
+    { 0x00007038, 0x000004c2 },
+    { 0x00008004, 0x00000000 },
+    { 0x00008008, 0x00000000 },
+    { 0x0000800c, 0x00000000 },
+    { 0x00008018, 0x00000700 },
+    { 0x00008020, 0x00000000 },
+    { 0x00008038, 0x00000000 },
+    { 0x0000803c, 0x00000000 },
+    { 0x00008048, 0x40000000 },
+    { 0x00008054, 0x00000000 },
+    { 0x00008058, 0x00000000 },
+    { 0x0000805c, 0x000fc78f },
+    { 0x00008060, 0x0000000f },
+    { 0x00008064, 0x00000000 },
+    { 0x000080c0, 0x2a82301a },
+    { 0x000080c4, 0x05dc01e0 },
+    { 0x000080c8, 0x1f402710 },
+    { 0x000080cc, 0x01f40000 },
+    { 0x000080d0, 0x00001e00 },
+    { 0x000080d4, 0x00000000 },
+    { 0x000080d8, 0x00400000 },
+    { 0x000080e0, 0xffffffff },
+    { 0x000080e4, 0x0000ffff },
+    { 0x000080e8, 0x003f3f3f },
+    { 0x000080ec, 0x00000000 },
+    { 0x000080f0, 0x00000000 },
+    { 0x000080f4, 0x00000000 },
+    { 0x000080f8, 0x00000000 },
+    { 0x000080fc, 0x00020000 },
+    { 0x00008100, 0x00020000 },
+    { 0x00008104, 0x00000001 },
+    { 0x00008108, 0x00000052 },
+    { 0x0000810c, 0x00000000 },
+    { 0x00008110, 0x00000168 },
+    { 0x00008118, 0x000100aa },
+    { 0x0000811c, 0x00003210 },
+    { 0x00008120, 0x08f04800 },
+    { 0x00008124, 0x00000000 },
+    { 0x00008128, 0x00000000 },
+    { 0x0000812c, 0x00000000 },
+    { 0x00008130, 0x00000000 },
+    { 0x00008134, 0x00000000 },
+    { 0x00008138, 0x00000000 },
+    { 0x0000813c, 0x00000000 },
+    { 0x00008144, 0x00000000 },
+    { 0x00008168, 0x00000000 },
+    { 0x0000816c, 0x00000000 },
+    { 0x00008170, 0x32143320 },
+    { 0x00008174, 0xfaa4fa50 },
+    { 0x00008178, 0x00000100 },
+    { 0x0000817c, 0x00000000 },
+    { 0x000081c4, 0x00000000 },
+    { 0x000081d0, 0x00003210 },
+    { 0x000081ec, 0x00000000 },
+    { 0x000081f0, 0x00000000 },
+    { 0x000081f4, 0x00000000 },
+    { 0x000081f8, 0x00000000 },
+    { 0x000081fc, 0x00000000 },
+    { 0x00008200, 0x00000000 },
+    { 0x00008204, 0x00000000 },
+    { 0x00008208, 0x00000000 },
+    { 0x0000820c, 0x00000000 },
+    { 0x00008210, 0x00000000 },
+    { 0x00008214, 0x00000000 },
+    { 0x00008218, 0x00000000 },
+    { 0x0000821c, 0x00000000 },
+    { 0x00008220, 0x00000000 },
+    { 0x00008224, 0x00000000 },
+    { 0x00008228, 0x00000000 },
+    { 0x0000822c, 0x00000000 },
+    { 0x00008230, 0x00000000 },
+    { 0x00008234, 0x00000000 },
+    { 0x00008238, 0x00000000 },
+    { 0x0000823c, 0x00000000 },
+    { 0x00008240, 0x00100000 },
+    { 0x00008244, 0x0010f400 },
+    { 0x00008248, 0x00000100 },
+    { 0x0000824c, 0x0001e800 },
+    { 0x00008250, 0x00000000 },
+    { 0x00008254, 0x00000000 },
+    { 0x00008258, 0x00000000 },
+    { 0x0000825c, 0x400000ff },
+    { 0x00008260, 0x00080922 },
+    { 0x00008270, 0x00000000 },
+    { 0x00008274, 0x40000000 },
+    { 0x00008278, 0x003e4180 },
+    { 0x0000827c, 0x00000000 },
+    { 0x00008284, 0x0000002c },
+    { 0x00008288, 0x0000002c },
+    { 0x0000828c, 0x00000000 },
+    { 0x00008294, 0x00000000 },
+    { 0x00008298, 0x00000000 },
+    { 0x00008300, 0x00000000 },
+    { 0x00008304, 0x00000000 },
+    { 0x00008308, 0x00000000 },
+    { 0x0000830c, 0x00000000 },
+    { 0x00008310, 0x00000000 },
+    { 0x00008314, 0x00000000 },
+    { 0x00008318, 0x00000000 },
+    { 0x00008328, 0x00000000 },
+    { 0x0000832c, 0x00000007 },
+    { 0x00008330, 0x00000302 },
+    { 0x00008334, 0x00000e00 },
+    { 0x00008338, 0x00000000 },
+    { 0x0000833c, 0x00000000 },
+    { 0x00008340, 0x000107ff },
+    { 0x00009808, 0x00000000 },
+    { 0x0000980c, 0xad848e19 },
+    { 0x00009810, 0x7d14e000 },
+    { 0x00009814, 0x9c0a9f6b },
+    { 0x0000981c, 0x00000000 },
+    { 0x0000982c, 0x0000a000 },
+    { 0x00009830, 0x00000000 },
+    { 0x0000983c, 0x00200400 },
+    { 0x00009840, 0x206a002e },
+    { 0x0000984c, 0x1284233c },
+    { 0x00009854, 0x00000859 },
+    { 0x00009900, 0x00000000 },
+    { 0x00009904, 0x00000000 },
+    { 0x00009908, 0x00000000 },
+    { 0x0000990c, 0x00000000 },
+    { 0x0000991c, 0x10000fff },
+    { 0x00009920, 0x05100000 },
+    { 0x0000a920, 0x05100000 },
+    { 0x0000b920, 0x05100000 },
+    { 0x00009928, 0x00000001 },
+    { 0x0000992c, 0x00000004 },
+    { 0x00009934, 0x1e1f2022 },
+    { 0x00009938, 0x0a0b0c0d },
+    { 0x0000993c, 0x00000000 },
+    { 0x00009948, 0x9280b212 },
+    { 0x0000994c, 0x00020028 },
+    { 0x00009954, 0x5d50e188 },
+    { 0x00009958, 0x00081fff },
+    { 0x0000c95c, 0x004b6a8e },
+    { 0x0000c968, 0x000003ce },
+    { 0x00009970, 0x190fb515 },
+    { 0x00009974, 0x00000000 },
+    { 0x00009978, 0x00000001 },
+    { 0x0000997c, 0x00000000 },
+    { 0x00009980, 0x00000000 },
+    { 0x00009984, 0x00000000 },
+    { 0x00009988, 0x00000000 },
+    { 0x0000998c, 0x00000000 },
+    { 0x00009990, 0x00000000 },
+    { 0x00009994, 0x00000000 },
+    { 0x00009998, 0x00000000 },
+    { 0x0000999c, 0x00000000 },
+    { 0x000099a0, 0x00000000 },
+    { 0x000099a4, 0x00000001 },
+    { 0x000099a8, 0x001fff00 },
+    { 0x000099ac, 0x00000000 },
+    { 0x000099b0, 0x03051000 },
+    { 0x000099dc, 0x00000000 },
+    { 0x000099e0, 0x00000200 },
+    { 0x000099e4, 0xaaaaaaaa },
+    { 0x000099e8, 0x3c466478 },
+    { 0x000099ec, 0x000000aa },
+    { 0x000099fc, 0x00001042 },
+    { 0x00009b00, 0x00000000 },
+    { 0x00009b04, 0x00000001 },
+    { 0x00009b08, 0x00000002 },
+    { 0x00009b0c, 0x00000003 },
+    { 0x00009b10, 0x00000004 },
+    { 0x00009b14, 0x00000005 },
+    { 0x00009b18, 0x00000008 },
+    { 0x00009b1c, 0x00000009 },
+    { 0x00009b20, 0x0000000a },
+    { 0x00009b24, 0x0000000b },
+    { 0x00009b28, 0x0000000c },
+    { 0x00009b2c, 0x0000000d },
+    { 0x00009b30, 0x00000010 },
+    { 0x00009b34, 0x00000011 },
+    { 0x00009b38, 0x00000012 },
+    { 0x00009b3c, 0x00000013 },
+    { 0x00009b40, 0x00000014 },
+    { 0x00009b44, 0x00000015 },
+    { 0x00009b48, 0x00000018 },
+    { 0x00009b4c, 0x00000019 },
+    { 0x00009b50, 0x0000001a },
+    { 0x00009b54, 0x0000001b },
+    { 0x00009b58, 0x0000001c },
+    { 0x00009b5c, 0x0000001d },
+    { 0x00009b60, 0x00000020 },
+    { 0x00009b64, 0x00000021 },
+    { 0x00009b68, 0x00000022 },
+    { 0x00009b6c, 0x00000023 },
+    { 0x00009b70, 0x00000024 },
+    { 0x00009b74, 0x00000025 },
+    { 0x00009b78, 0x00000028 },
+    { 0x00009b7c, 0x00000029 },
+    { 0x00009b80, 0x0000002a },
+    { 0x00009b84, 0x0000002b },
+    { 0x00009b88, 0x0000002c },
+    { 0x00009b8c, 0x0000002d },
+    { 0x00009b90, 0x00000030 },
+    { 0x00009b94, 0x00000031 },
+    { 0x00009b98, 0x00000032 },
+    { 0x00009b9c, 0x00000033 },
+    { 0x00009ba0, 0x00000034 },
+    { 0x00009ba4, 0x00000035 },
+    { 0x00009ba8, 0x00000035 },
+    { 0x00009bac, 0x00000035 },
+    { 0x00009bb0, 0x00000035 },
+    { 0x00009bb4, 0x00000035 },
+    { 0x00009bb8, 0x00000035 },
+    { 0x00009bbc, 0x00000035 },
+    { 0x00009bc0, 0x00000035 },
+    { 0x00009bc4, 0x00000035 },
+    { 0x00009bc8, 0x00000035 },
+    { 0x00009bcc, 0x00000035 },
+    { 0x00009bd0, 0x00000035 },
+    { 0x00009bd4, 0x00000035 },
+    { 0x00009bd8, 0x00000035 },
+    { 0x00009bdc, 0x00000035 },
+    { 0x00009be0, 0x00000035 },
+    { 0x00009be4, 0x00000035 },
+    { 0x00009be8, 0x00000035 },
+    { 0x00009bec, 0x00000035 },
+    { 0x00009bf0, 0x00000035 },
+    { 0x00009bf4, 0x00000035 },
+    { 0x00009bf8, 0x00000010 },
+    { 0x00009bfc, 0x0000001a },
+    { 0x0000a210, 0x40806333 },
+    { 0x0000a214, 0x00106c10 },
+    { 0x0000a218, 0x009c4060 },
+    { 0x0000a220, 0x018830c6 },
+    { 0x0000a224, 0x00000400 },
+    { 0x0000a228, 0x00000bb5 },
+    { 0x0000a22c, 0x00000011 },
+    { 0x0000a234, 0x20202020 },
+    { 0x0000a238, 0x20202020 },
+    { 0x0000a23c, 0x13c889af },
+    { 0x0000a240, 0x38490a20 },
+    { 0x0000a244, 0x00007bb6 },
+    { 0x0000a248, 0x0fff3ffc },
+    { 0x0000a24c, 0x00000001 },
+    { 0x0000a250, 0x0000a000 },
+    { 0x0000a254, 0x00000000 },
+    { 0x0000a258, 0x0cc75380 },
+    { 0x0000a25c, 0x0f0f0f01 },
+    { 0x0000a260, 0xdfa91f01 },
+    { 0x0000a268, 0x00000000 },
+    { 0x0000a26c, 0x0ebae9c6 },
+    { 0x0000b26c, 0x0ebae9c6 },
+    { 0x0000c26c, 0x0ebae9c6 },
+    { 0x0000d270, 0x00820820 },
+    { 0x0000a278, 0x1ce739ce },
+    { 0x0000a27c, 0x051701ce },
+    { 0x0000a338, 0x00000000 },
+    { 0x0000a33c, 0x00000000 },
+    { 0x0000a340, 0x00000000 },
+    { 0x0000a344, 0x00000000 },
+    { 0x0000a348, 0x3fffffff },
+    { 0x0000a34c, 0x3fffffff },
+    { 0x0000a350, 0x3fffffff },
+    { 0x0000a354, 0x0003ffff },
+    { 0x0000a358, 0x79a8aa1f },
+    { 0x0000d35c, 0x07ffffef },
+    { 0x0000d360, 0x0fffffe7 },
+    { 0x0000d364, 0x17ffffe5 },
+    { 0x0000d368, 0x1fffffe4 },
+    { 0x0000d36c, 0x37ffffe3 },
+    { 0x0000d370, 0x3fffffe3 },
+    { 0x0000d374, 0x57ffffe3 },
+    { 0x0000d378, 0x5fffffe2 },
+    { 0x0000d37c, 0x7fffffe2 },
+    { 0x0000d380, 0x7f3c7bba },
+    { 0x0000d384, 0xf3307ff0 },
+    { 0x0000a388, 0x08000000 },
+    { 0x0000a38c, 0x20202020 },
+    { 0x0000a390, 0x20202020 },
+    { 0x0000a394, 0x1ce739ce },
+    { 0x0000a398, 0x000001ce },
+    { 0x0000a39c, 0x00000001 },
+    { 0x0000a3a0, 0x00000000 },
+    { 0x0000a3a4, 0x00000000 },
+    { 0x0000a3a8, 0x00000000 },
+    { 0x0000a3ac, 0x00000000 },
+    { 0x0000a3b0, 0x00000000 },
+    { 0x0000a3b4, 0x00000000 },
+    { 0x0000a3b8, 0x00000000 },
+    { 0x0000a3bc, 0x00000000 },
+    { 0x0000a3c0, 0x00000000 },
+    { 0x0000a3c4, 0x00000000 },
+    { 0x0000a3c8, 0x00000246 },
+    { 0x0000a3cc, 0x20202020 },
+    { 0x0000a3d0, 0x20202020 },
+    { 0x0000a3d4, 0x20202020 },
+    { 0x0000a3dc, 0x1ce739ce },
+    { 0x0000a3e0, 0x000001ce },
+};
+
+static const u32 ar5416Bank0_9100[][2] = {
+    { 0x000098b0, 0x1e5795e5 },
+    { 0x000098e0, 0x02008020 },
+};
+
+static const u32 ar5416BB_RfGain_9100[][3] = {
+    { 0x00009a00, 0x00000000, 0x00000000 },
+    { 0x00009a04, 0x00000040, 0x00000040 },
+    { 0x00009a08, 0x00000080, 0x00000080 },
+    { 0x00009a0c, 0x000001a1, 0x00000141 },
+    { 0x00009a10, 0x000001e1, 0x00000181 },
+    { 0x00009a14, 0x00000021, 0x000001c1 },
+    { 0x00009a18, 0x00000061, 0x00000001 },
+    { 0x00009a1c, 0x00000168, 0x00000041 },
+    { 0x00009a20, 0x000001a8, 0x000001a8 },
+    { 0x00009a24, 0x000001e8, 0x000001e8 },
+    { 0x00009a28, 0x00000028, 0x00000028 },
+    { 0x00009a2c, 0x00000068, 0x00000068 },
+    { 0x00009a30, 0x00000189, 0x000000a8 },
+    { 0x00009a34, 0x000001c9, 0x00000169 },
+    { 0x00009a38, 0x00000009, 0x000001a9 },
+    { 0x00009a3c, 0x00000049, 0x000001e9 },
+    { 0x00009a40, 0x00000089, 0x00000029 },
+    { 0x00009a44, 0x00000170, 0x00000069 },
+    { 0x00009a48, 0x000001b0, 0x00000190 },
+    { 0x00009a4c, 0x000001f0, 0x000001d0 },
+    { 0x00009a50, 0x00000030, 0x00000010 },
+    { 0x00009a54, 0x00000070, 0x00000050 },
+    { 0x00009a58, 0x00000191, 0x00000090 },
+    { 0x00009a5c, 0x000001d1, 0x00000151 },
+    { 0x00009a60, 0x00000011, 0x00000191 },
+    { 0x00009a64, 0x00000051, 0x000001d1 },
+    { 0x00009a68, 0x00000091, 0x00000011 },
+    { 0x00009a6c, 0x000001b8, 0x00000051 },
+    { 0x00009a70, 0x000001f8, 0x00000198 },
+    { 0x00009a74, 0x00000038, 0x000001d8 },
+    { 0x00009a78, 0x00000078, 0x00000018 },
+    { 0x00009a7c, 0x00000199, 0x00000058 },
+    { 0x00009a80, 0x000001d9, 0x00000098 },
+    { 0x00009a84, 0x00000019, 0x00000159 },
+    { 0x00009a88, 0x00000059, 0x00000199 },
+    { 0x00009a8c, 0x00000099, 0x000001d9 },
+    { 0x00009a90, 0x000000d9, 0x00000019 },
+    { 0x00009a94, 0x000000f9, 0x00000059 },
+    { 0x00009a98, 0x000000f9, 0x00000099 },
+    { 0x00009a9c, 0x000000f9, 0x000000d9 },
+    { 0x00009aa0, 0x000000f9, 0x000000f9 },
+    { 0x00009aa4, 0x000000f9, 0x000000f9 },
+    { 0x00009aa8, 0x000000f9, 0x000000f9 },
+    { 0x00009aac, 0x000000f9, 0x000000f9 },
+    { 0x00009ab0, 0x000000f9, 0x000000f9 },
+    { 0x00009ab4, 0x000000f9, 0x000000f9 },
+    { 0x00009ab8, 0x000000f9, 0x000000f9 },
+    { 0x00009abc, 0x000000f9, 0x000000f9 },
+    { 0x00009ac0, 0x000000f9, 0x000000f9 },
+    { 0x00009ac4, 0x000000f9, 0x000000f9 },
+    { 0x00009ac8, 0x000000f9, 0x000000f9 },
+    { 0x00009acc, 0x000000f9, 0x000000f9 },
+    { 0x00009ad0, 0x000000f9, 0x000000f9 },
+    { 0x00009ad4, 0x000000f9, 0x000000f9 },
+    { 0x00009ad8, 0x000000f9, 0x000000f9 },
+    { 0x00009adc, 0x000000f9, 0x000000f9 },
+    { 0x00009ae0, 0x000000f9, 0x000000f9 },
+    { 0x00009ae4, 0x000000f9, 0x000000f9 },
+    { 0x00009ae8, 0x000000f9, 0x000000f9 },
+    { 0x00009aec, 0x000000f9, 0x000000f9 },
+    { 0x00009af0, 0x000000f9, 0x000000f9 },
+    { 0x00009af4, 0x000000f9, 0x000000f9 },
+    { 0x00009af8, 0x000000f9, 0x000000f9 },
+    { 0x00009afc, 0x000000f9, 0x000000f9 },
+};
+
+static const u32 ar5416Bank1_9100[][2] = {
+    { 0x000098b0, 0x02108421 },
+    { 0x000098ec, 0x00000008 },
+};
+
+static const u32 ar5416Bank2_9100[][2] = {
+    { 0x000098b0, 0x0e73ff17 },
+    { 0x000098e0, 0x00000420 },
+};
+
+static const u32 ar5416Bank3_9100[][3] = {
+    { 0x000098f0, 0x01400018, 0x01c00018 },
+};
+
+static const u32 ar5416Bank6_9100[][3] = {
+
+    { 0x0000989c, 0x00000000, 0x00000000 },
+    { 0x0000989c, 0x00000000, 0x00000000 },
+    { 0x0000989c, 0x00000000, 0x00000000 },
+    { 0x0000989c, 0x00e00000, 0x00e00000 },
+    { 0x0000989c, 0x005e0000, 0x005e0000 },
+    { 0x0000989c, 0x00120000, 0x00120000 },
+    { 0x0000989c, 0x00620000, 0x00620000 },
+    { 0x0000989c, 0x00020000, 0x00020000 },
+    { 0x0000989c, 0x00ff0000, 0x00ff0000 },
+    { 0x0000989c, 0x00ff0000, 0x00ff0000 },
+    { 0x0000989c, 0x00ff0000, 0x00ff0000 },
+    { 0x0000989c, 0x40ff0000, 0x40ff0000 },
+    { 0x0000989c, 0x005f0000, 0x005f0000 },
+    { 0x0000989c, 0x00870000, 0x00870000 },
+    { 0x0000989c, 0x00f90000, 0x00f90000 },
+    { 0x0000989c, 0x007b0000, 0x007b0000 },
+    { 0x0000989c, 0x00ff0000, 0x00ff0000 },
+    { 0x0000989c, 0x00f50000, 0x00f50000 },
+    { 0x0000989c, 0x00dc0000, 0x00dc0000 },
+    { 0x0000989c, 0x00110000, 0x00110000 },
+    { 0x0000989c, 0x006100a8, 0x006100a8 },
+    { 0x0000989c, 0x004210a2, 0x004210a2 },
+    { 0x0000989c, 0x0014008f, 0x0014008f },
+    { 0x0000989c, 0x00c40003, 0x00c40003 },
+    { 0x0000989c, 0x003000f2, 0x003000f2 },
+    { 0x0000989c, 0x00440016, 0x00440016 },
+    { 0x0000989c, 0x00410040, 0x00410040 },
+    { 0x0000989c, 0x0001805e, 0x0001805e },
+    { 0x0000989c, 0x0000c0ab, 0x0000c0ab },
+    { 0x0000989c, 0x000000f1, 0x000000f1 },
+    { 0x0000989c, 0x00002081, 0x00002081 },
+    { 0x0000989c, 0x000000d4, 0x000000d4 },
+    { 0x000098d0, 0x0000000f, 0x0010000f },
+};
+
+static const u32 ar5416Bank6TPC_9100[][3] = {
+    { 0x0000989c, 0x00000000, 0x00000000 },
+    { 0x0000989c, 0x00000000, 0x00000000 },
+    { 0x0000989c, 0x00000000, 0x00000000 },
+    { 0x0000989c, 0x00e00000, 0x00e00000 },
+    { 0x0000989c, 0x005e0000, 0x005e0000 },
+    { 0x0000989c, 0x00120000, 0x00120000 },
+    { 0x0000989c, 0x00620000, 0x00620000 },
+    { 0x0000989c, 0x00020000, 0x00020000 },
+    { 0x0000989c, 0x00ff0000, 0x00ff0000 },
+    { 0x0000989c, 0x00ff0000, 0x00ff0000 },
+    { 0x0000989c, 0x00ff0000, 0x00ff0000 },
+    { 0x0000989c, 0x40ff0000, 0x40ff0000 },
+    { 0x0000989c, 0x005f0000, 0x005f0000 },
+    { 0x0000989c, 0x00870000, 0x00870000 },
+    { 0x0000989c, 0x00f90000, 0x00f90000 },
+    { 0x0000989c, 0x007b0000, 0x007b0000 },
+    { 0x0000989c, 0x00ff0000, 0x00ff0000 },
+    { 0x0000989c, 0x00f50000, 0x00f50000 },
+    { 0x0000989c, 0x00dc0000, 0x00dc0000 },
+    { 0x0000989c, 0x00110000, 0x00110000 },
+    { 0x0000989c, 0x006100a8, 0x006100a8 },
+    { 0x0000989c, 0x00423022, 0x00423022 },
+    { 0x0000989c, 0x201400df, 0x201400df },
+    { 0x0000989c, 0x00c40002, 0x00c40002 },
+    { 0x0000989c, 0x003000f2, 0x003000f2 },
+    { 0x0000989c, 0x00440016, 0x00440016 },
+    { 0x0000989c, 0x00410040, 0x00410040 },
+    { 0x0000989c, 0x0001805e, 0x0001805e },
+    { 0x0000989c, 0x0000c0ab, 0x0000c0ab },
+    { 0x0000989c, 0x000000e1, 0x000000e1 },
+    { 0x0000989c, 0x00007081, 0x00007081 },
+    { 0x0000989c, 0x000000d4, 0x000000d4 },
+    { 0x000098d0, 0x0000000f, 0x0010000f },
+};
+
+static const u32 ar5416Bank7_9100[][2] = {
+    { 0x0000989c, 0x00000500 },
+    { 0x0000989c, 0x00000800 },
+    { 0x000098cc, 0x0000000e },
+};
+
+static const u32 ar5416Addac_9100[][2] = {
+    {0x0000989c,  0x00000000 },
+    {0x0000989c,  0x00000003 },
+    {0x0000989c,  0x00000000 },
+    {0x0000989c,  0x0000000c },
+    {0x0000989c,  0x00000000 },
+    {0x0000989c,  0x00000030 },
+    {0x0000989c,  0x00000000 },
+    {0x0000989c,  0x00000000 },
+    {0x0000989c,  0x00000000 },
+    {0x0000989c,  0x00000000 },
+    {0x0000989c,  0x00000000 },
+    {0x0000989c,  0x00000000 },
+    {0x0000989c,  0x00000000 },
+    {0x0000989c,  0x00000000 },
+    {0x0000989c,  0x00000000 },
+    {0x0000989c,  0x00000000 },
+    {0x0000989c,  0x00000000 },
+    {0x0000989c,  0x00000000 },
+    {0x0000989c,  0x00000060 },
+    {0x0000989c,  0x00000000 },
+    {0x0000989c,  0x00000000 },
+    {0x0000989c,  0x00000000 },
+    {0x0000989c,  0x00000000 },
+    {0x0000989c,  0x00000000 },
+    {0x0000989c,  0x00000000 },
+    {0x0000989c,  0x00000000 },
+    {0x0000989c,  0x00000000 },
+    {0x0000989c,  0x00000000 },
+    {0x0000989c,  0x00000000 },
+    {0x0000989c,  0x00000000 },
+    {0x0000989c,  0x00000000 },
+    {0x0000989c,  0x00000058 },
+    {0x0000989c,  0x00000000 },
+    {0x0000989c,  0x00000000 },
+    {0x0000989c,  0x00000000 },
+    {0x0000989c,  0x00000000 },
+    {0x000098c4,  0x00000000 },
+};
+
+static const u32 ar5416Modes[][6] = {
+    { 0x00001030, 0x00000230, 0x00000460, 0x000002c0, 0x00000160, 0x000001e0 },
+    { 0x00001070, 0x00000168, 0x000002d0, 0x00000318, 0x0000018c, 0x000001e0 },
+    { 0x000010b0, 0x00000e60, 0x00001cc0, 0x00007c70, 0x00003e38, 0x00001180 },
+    { 0x000010f0, 0x0000a000, 0x00014000, 0x00016000, 0x0000b000, 0x00014008 },
+    { 0x00008014, 0x03e803e8, 0x07d007d0, 0x10801600, 0x08400b00, 0x06e006e0 },
+    { 0x0000801c, 0x128d93a7, 0x128d93cf, 0x12e013d7, 0x12e013ab, 0x098813cf },
+    { 0x00009804, 0x00000300, 0x000003c4, 0x000003c4, 0x00000300, 0x00000303 },
+    { 0x00009820, 0x02020200, 0x02020200, 0x02020200, 0x02020200, 0x02020200 },
+    { 0x00009824, 0x00000e0e, 0x00000e0e, 0x00000e0e, 0x00000e0e, 0x00000e0e },
+    { 0x00009828, 0x0a020001, 0x0a020001, 0x0a020001, 0x0a020001, 0x0a020001 },
+    { 0x00009834, 0x00000e0e, 0x00000e0e, 0x00000e0e, 0x00000e0e, 0x00000e0e },
+    { 0x00009838, 0x00000007, 0x00000007, 0x00000007, 0x00000007, 0x00000007 },
+    { 0x00009844, 0x0372161e, 0x0372161e, 0x037216a0, 0x037216a0, 0x037216a0 },
+    { 0x00009848, 0x001a6a65, 0x001a6a65, 0x00197a68, 0x00197a68, 0x00197a68 },
+    { 0x0000a848, 0x001a6a65, 0x001a6a65, 0x00197a68, 0x00197a68, 0x00197a68 },
+    { 0x0000b848, 0x001a6a65, 0x001a6a65, 0x00197a68, 0x00197a68, 0x00197a68 },
+    { 0x00009850, 0x6d48b4e2, 0x6d48b4e2, 0x6d48b0e2, 0x6d48b0e2, 0x6d48b0e2 },
+    { 0x00009858, 0x7ec82d2e, 0x7ec82d2e, 0x7ec86d2e, 0x7ec84d2e, 0x7ec82d2e },
+    { 0x0000985c, 0x3139605e, 0x3139605e, 0x3139605e, 0x3139605e, 0x3139605e },
+    { 0x00009860, 0x00048d18, 0x00048d18, 0x00048d20, 0x00048d20, 0x00048d18 },
+    { 0x0000c864, 0x0001ce00, 0x0001ce00, 0x0001ce00, 0x0001ce00, 0x0001ce00 },
+    { 0x00009868, 0x409a40d0, 0x409a40d0, 0x409a40d0, 0x409a40d0, 0x409a40d0 },
+    { 0x0000986c, 0x050cb081, 0x050cb081, 0x050cb081, 0x050cb081, 0x050cb081 },
+    { 0x00009914, 0x000007d0, 0x000007d0, 0x00000898, 0x00000898, 0x000007d0 },
+    { 0x00009918, 0x0000000a, 0x00000014, 0x00000016, 0x0000000b, 0x00000016 },
+    { 0x00009924, 0xd00a8a07, 0xd00a8a07, 0xd00a8a11, 0xd00a8a0d, 0xd00a8a0d },
+    { 0x00009940, 0x00754604, 0x00754604, 0xfff81204, 0xfff81204, 0xfff81204 },
+    { 0x00009944, 0xdfb81020, 0xdfb81020, 0xdfb81020, 0xdfb81020, 0xdfb81020 },
+    { 0x00009954, 0x5f3ca3de, 0x5f3ca3de, 0xe250a51e, 0xe250a51e, 0xe250a51e },
+    { 0x00009958, 0x2108ecff, 0x2108ecff, 0x3388ffff, 0x3388ffff, 0x3388ffff },
+#ifdef TB243
+    { 0x00009960, 0x00000900, 0x00000900, 0x00009b40, 0x00009b40, 0x00012d80 },
+    { 0x0000a960, 0x00000900, 0x00000900, 0x00009b40, 0x00009b40, 0x00012d80 },
+    { 0x0000b960, 0x00000900, 0x00000900, 0x00009b40, 0x00009b40, 0x00012d80 },
+    { 0x00009964, 0x00000000, 0x00000000, 0x00002210, 0x00002210, 0x00001120 },
+#else
+    { 0x00009960, 0x0001bfc0, 0x0001bfc0, 0x0001bfc0, 0x0001bfc0, 0x0001bfc0 },
+    { 0x0000a960, 0x0001bfc0, 0x0001bfc0, 0x0001bfc0, 0x0001bfc0, 0x0001bfc0 },
+    { 0x0000b960, 0x0001bfc0, 0x0001bfc0, 0x0001bfc0, 0x0001bfc0, 0x0001bfc0 },
+    { 0x00009964, 0x00001120, 0x00001120, 0x00001120, 0x00001120, 0x00001120 },
+#endif
+    { 0x0000c9bc, 0x001a0600, 0x001a0600, 0x001a1000, 0x001a0c00, 0x001a0c00 },
+    { 0x000099c0, 0x038919be, 0x038919be, 0x038919be, 0x038919be, 0x038919be },
+    { 0x000099c4, 0x06336f77, 0x06336f77, 0x06336f77, 0x06336f77, 0x06336f77 },
+    { 0x000099c8, 0x60f65329, 0x60f65329, 0x60f65329, 0x60f65329, 0x60f65329 },
+    { 0x000099cc, 0x08f186c8, 0x08f186c8, 0x08f186c8, 0x08f186c8, 0x08f186c8 },
+    { 0x000099d0, 0x00046384, 0x00046384, 0x00046384, 0x00046384, 0x00046384 },
+    { 0x000099d4, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 },
+    { 0x000099d8, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 },
+    { 0x0000a204, 0x00000880, 0x00000880, 0x00000880, 0x00000880, 0x00000880 },
+    { 0x0000a208, 0xd6be4788, 0xd6be4788, 0xd03e4788, 0xd03e4788, 0xd03e4788 },
+    { 0x0000a20c, 0x002fc160, 0x002fc160, 0x002ac120, 0x002ac120, 0x002ac120 },
+    { 0x0000b20c, 0x002fc160, 0x002fc160, 0x002ac120, 0x002ac120, 0x002ac120 },
+    { 0x0000c20c, 0x002fc160, 0x002fc160, 0x002ac120, 0x002ac120, 0x002ac120 },
+    { 0x0000a21c, 0x1883800a, 0x1883800a, 0x1883800a, 0x1883800a, 0x1883800a },
+    { 0x0000a230, 0x00000000, 0x00000000, 0x00000210, 0x00000108, 0x00000000 },
+    { 0x0000a274, 0x0a1a9caa, 0x0a1a9caa, 0x0a1a7caa, 0x0a1a7caa, 0x0a1a7caa },
+    { 0x0000a300, 0x18010000, 0x18010000, 0x18010000, 0x18010000, 0x18010000 },
+    { 0x0000a304, 0x30032602, 0x30032602, 0x2e032402, 0x2e032402, 0x2e032402 },
+    { 0x0000a308, 0x48073e06, 0x48073e06, 0x4a0a3c06, 0x4a0a3c06, 0x4a0a3c06 },
+    { 0x0000a30c, 0x560b4c0a, 0x560b4c0a, 0x621a540b, 0x621a540b, 0x621a540b },
+    { 0x0000a310, 0x641a600f, 0x641a600f, 0x764f6c1b, 0x764f6c1b, 0x764f6c1b },
+    { 0x0000a314, 0x7a4f6e1b, 0x7a4f6e1b, 0x845b7a5a, 0x845b7a5a, 0x845b7a5a },
+    { 0x0000a318, 0x8c5b7e5a, 0x8c5b7e5a, 0x950f8ccf, 0x950f8ccf, 0x950f8ccf },
+    { 0x0000a31c, 0x9d0f96cf, 0x9d0f96cf, 0xa5cf9b4f, 0xa5cf9b4f, 0xa5cf9b4f },
+    { 0x0000a320, 0xb51fa69f, 0xb51fa69f, 0xbddfaf1f, 0xbddfaf1f, 0xbddfaf1f },
+    { 0x0000a324, 0xcb3fbd07, 0xcb3fbcbf, 0xd1ffc93f, 0xd1ffc93f, 0xd1ffc93f },
+    { 0x0000a328, 0x0000d7bf, 0x0000d7bf, 0x00000000, 0x00000000, 0x00000000 },
+    { 0x0000a32c, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 },
+    { 0x0000a330, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 },
+    { 0x0000a334, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 },
+};
+
+static const u32 ar5416Common[][2] = {
+    { 0x0000000c, 0x00000000 },
+    { 0x00000030, 0x00020015 },
+    { 0x00000034, 0x00000005 },
+    { 0x00000040, 0x00000000 },
+    { 0x00000044, 0x00000008 },
+    { 0x00000048, 0x00000008 },
+    { 0x0000004c, 0x00000010 },
+    { 0x00000050, 0x00000000 },
+    { 0x00000054, 0x0000001f },
+    { 0x00000800, 0x00000000 },
+    { 0x00000804, 0x00000000 },
+    { 0x00000808, 0x00000000 },
+    { 0x0000080c, 0x00000000 },
+    { 0x00000810, 0x00000000 },
+    { 0x00000814, 0x00000000 },
+    { 0x00000818, 0x00000000 },
+    { 0x0000081c, 0x00000000 },
+    { 0x00000820, 0x00000000 },
+    { 0x00000824, 0x00000000 },
+    { 0x00001040, 0x002ffc0f },
+    { 0x00001044, 0x002ffc0f },
+    { 0x00001048, 0x002ffc0f },
+    { 0x0000104c, 0x002ffc0f },
+    { 0x00001050, 0x002ffc0f },
+    { 0x00001054, 0x002ffc0f },
+    { 0x00001058, 0x002ffc0f },
+    { 0x0000105c, 0x002ffc0f },
+    { 0x00001060, 0x002ffc0f },
+    { 0x00001064, 0x002ffc0f },
+    { 0x00001230, 0x00000000 },
+    { 0x00001270, 0x00000000 },
+    { 0x00001038, 0x00000000 },
+    { 0x00001078, 0x00000000 },
+    { 0x000010b8, 0x00000000 },
+    { 0x000010f8, 0x00000000 },
+    { 0x00001138, 0x00000000 },
+    { 0x00001178, 0x00000000 },
+    { 0x000011b8, 0x00000000 },
+    { 0x000011f8, 0x00000000 },
+    { 0x00001238, 0x00000000 },
+    { 0x00001278, 0x00000000 },
+    { 0x000012b8, 0x00000000 },
+    { 0x000012f8, 0x00000000 },
+    { 0x00001338, 0x00000000 },
+    { 0x00001378, 0x00000000 },
+    { 0x000013b8, 0x00000000 },
+    { 0x000013f8, 0x00000000 },
+    { 0x00001438, 0x00000000 },
+    { 0x00001478, 0x00000000 },
+    { 0x000014b8, 0x00000000 },
+    { 0x000014f8, 0x00000000 },
+    { 0x00001538, 0x00000000 },
+    { 0x00001578, 0x00000000 },
+    { 0x000015b8, 0x00000000 },
+    { 0x000015f8, 0x00000000 },
+    { 0x00001638, 0x00000000 },
+    { 0x00001678, 0x00000000 },
+    { 0x000016b8, 0x00000000 },
+    { 0x000016f8, 0x00000000 },
+    { 0x00001738, 0x00000000 },
+    { 0x00001778, 0x00000000 },
+    { 0x000017b8, 0x00000000 },
+    { 0x000017f8, 0x00000000 },
+    { 0x0000103c, 0x00000000 },
+    { 0x0000107c, 0x00000000 },
+    { 0x000010bc, 0x00000000 },
+    { 0x000010fc, 0x00000000 },
+    { 0x0000113c, 0x00000000 },
+    { 0x0000117c, 0x00000000 },
+    { 0x000011bc, 0x00000000 },
+    { 0x000011fc, 0x00000000 },
+    { 0x0000123c, 0x00000000 },
+    { 0x0000127c, 0x00000000 },
+    { 0x000012bc, 0x00000000 },
+    { 0x000012fc, 0x00000000 },
+    { 0x0000133c, 0x00000000 },
+    { 0x0000137c, 0x00000000 },
+    { 0x000013bc, 0x00000000 },
+    { 0x000013fc, 0x00000000 },
+    { 0x0000143c, 0x00000000 },
+    { 0x0000147c, 0x00000000 },
+    { 0x00020010, 0x00000003 },
+    { 0x00020038, 0x000004c2 },
+    { 0x00008004, 0x00000000 },
+    { 0x00008008, 0x00000000 },
+    { 0x0000800c, 0x00000000 },
+    { 0x00008018, 0x00000700 },
+    { 0x00008020, 0x00000000 },
+    { 0x00008038, 0x00000000 },
+    { 0x0000803c, 0x00000000 },
+    { 0x00008048, 0x40000000 },
+    { 0x00008054, 0x00004000 },
+    { 0x00008058, 0x00000000 },
+    { 0x0000805c, 0x000fc78f },
+    { 0x00008060, 0x0000000f },
+    { 0x00008064, 0x00000000 },
+    { 0x000080c0, 0x2a82301a },
+    { 0x000080c4, 0x05dc01e0 },
+    { 0x000080c8, 0x1f402710 },
+    { 0x000080cc, 0x01f40000 },
+    { 0x000080d0, 0x00001e00 },
+    { 0x000080d4, 0x00000000 },
+    { 0x000080d8, 0x00400000 },
+    { 0x000080e0, 0xffffffff },
+    { 0x000080e4, 0x0000ffff },
+    { 0x000080e8, 0x003f3f3f },
+    { 0x000080ec, 0x00000000 },
+    { 0x000080f0, 0x00000000 },
+    { 0x000080f4, 0x00000000 },
+    { 0x000080f8, 0x00000000 },
+    { 0x000080fc, 0x00020000 },
+    { 0x00008100, 0x00020000 },
+    { 0x00008104, 0x00000001 },
+    { 0x00008108, 0x00000052 },
+    { 0x0000810c, 0x00000000 },
+    { 0x00008110, 0x00000168 },
+    { 0x00008118, 0x000100aa },
+    { 0x0000811c, 0x00003210 },
+    { 0x00008120, 0x08f04800 },
+    { 0x00008124, 0x00000000 },
+    { 0x00008128, 0x00000000 },
+    { 0x0000812c, 0x00000000 },
+    { 0x00008130, 0x00000000 },
+    { 0x00008134, 0x00000000 },
+    { 0x00008138, 0x00000000 },
+    { 0x0000813c, 0x00000000 },
+    { 0x00008144, 0x00000000 },
+    { 0x00008168, 0x00000000 },
+    { 0x0000816c, 0x00000000 },
+    { 0x00008170, 0x32143320 },
+    { 0x00008174, 0xfaa4fa50 },
+    { 0x00008178, 0x00000100 },
+    { 0x0000817c, 0x00000000 },
+    { 0x000081c4, 0x00000000 },
+    { 0x000081d0, 0x00003210 },
+    { 0x000081ec, 0x00000000 },
+    { 0x000081f0, 0x00000000 },
+    { 0x000081f4, 0x00000000 },
+    { 0x000081f8, 0x00000000 },
+    { 0x000081fc, 0x00000000 },
+    { 0x00008200, 0x00000000 },
+    { 0x00008204, 0x00000000 },
+    { 0x00008208, 0x00000000 },
+    { 0x0000820c, 0x00000000 },
+    { 0x00008210, 0x00000000 },
+    { 0x00008214, 0x00000000 },
+    { 0x00008218, 0x00000000 },
+    { 0x0000821c, 0x00000000 },
+    { 0x00008220, 0x00000000 },
+    { 0x00008224, 0x00000000 },
+    { 0x00008228, 0x00000000 },
+    { 0x0000822c, 0x00000000 },
+    { 0x00008230, 0x00000000 },
+    { 0x00008234, 0x00000000 },
+    { 0x00008238, 0x00000000 },
+    { 0x0000823c, 0x00000000 },
+    { 0x00008240, 0x00100000 },
+    { 0x00008244, 0x0010f400 },
+    { 0x00008248, 0x00000100 },
+    { 0x0000824c, 0x0001e800 },
+    { 0x00008250, 0x00000000 },
+    { 0x00008254, 0x00000000 },
+    { 0x00008258, 0x00000000 },
+    { 0x0000825c, 0x400000ff },
+    { 0x00008260, 0x00080922 },
+    { 0x00008270, 0x00000000 },
+    { 0x00008274, 0x40000000 },
+    { 0x00008278, 0x003e4180 },
+    { 0x0000827c, 0x00000000 },
+    { 0x00008284, 0x0000002c },
+    { 0x00008288, 0x0000002c },
+    { 0x0000828c, 0x00000000 },
+    { 0x00008294, 0x00000000 },
+    { 0x00008298, 0x00000000 },
+    { 0x00008300, 0x00000000 },
+    { 0x00008304, 0x00000000 },
+    { 0x00008308, 0x00000000 },
+    { 0x0000830c, 0x00000000 },
+    { 0x00008310, 0x00000000 },
+    { 0x00008314, 0x00000000 },
+    { 0x00008318, 0x00000000 },
+    { 0x00008328, 0x00000000 },
+    { 0x0000832c, 0x00000007 },
+    { 0x00008330, 0x00000302 },
+    { 0x00008334, 0x00000e00 },
+    { 0x00008338, 0x00000000 },
+    { 0x0000833c, 0x00000000 },
+    { 0x00008340, 0x000107ff },
+    { 0x00009808, 0x00000000 },
+    { 0x0000980c, 0xad848e19 },
+    { 0x00009810, 0x7d14e000 },
+    { 0x00009814, 0x9c0a9f6b },
+    { 0x0000981c, 0x00000000 },
+    { 0x0000982c, 0x0000a000 },
+    { 0x00009830, 0x00000000 },
+    { 0x0000983c, 0x00200400 },
+    { 0x00009840, 0x206a01ae },
+    { 0x0000984c, 0x1284233c },
+    { 0x00009854, 0x00000859 },
+    { 0x00009900, 0x00000000 },
+    { 0x00009904, 0x00000000 },
+    { 0x00009908, 0x00000000 },
+    { 0x0000990c, 0x00000000 },
+    { 0x0000991c, 0x10000fff },
+    { 0x00009920, 0x05100000 },
+    { 0x0000a920, 0x05100000 },
+    { 0x0000b920, 0x05100000 },
+    { 0x00009928, 0x00000001 },
+    { 0x0000992c, 0x00000004 },
+    { 0x00009934, 0x1e1f2022 },
+    { 0x00009938, 0x0a0b0c0d },
+    { 0x0000993c, 0x00000000 },
+    { 0x00009948, 0x9280b212 },
+    { 0x0000994c, 0x00020028 },
+    { 0x0000c95c, 0x004b6a8e },
+    { 0x0000c968, 0x000003ce },
+    { 0x00009970, 0x190fb514 },
+    { 0x00009974, 0x00000000 },
+    { 0x00009978, 0x00000001 },
+    { 0x0000997c, 0x00000000 },
+    { 0x00009980, 0x00000000 },
+    { 0x00009984, 0x00000000 },
+    { 0x00009988, 0x00000000 },
+    { 0x0000998c, 0x00000000 },
+    { 0x00009990, 0x00000000 },
+    { 0x00009994, 0x00000000 },
+    { 0x00009998, 0x00000000 },
+    { 0x0000999c, 0x00000000 },
+    { 0x000099a0, 0x00000000 },
+    { 0x000099a4, 0x00000001 },
+    { 0x000099a8, 0x201fff00 },
+    { 0x000099ac, 0x006f0000 },
+    { 0x000099b0, 0x03051000 },
+    { 0x000099dc, 0x00000000 },
+    { 0x000099e0, 0x00000200 },
+    { 0x000099e4, 0xaaaaaaaa },
+    { 0x000099e8, 0x3c466478 },
+    { 0x000099ec, 0x0cc80caa },
+    { 0x000099fc, 0x00001042 },
+    { 0x00009b00, 0x00000000 },
+    { 0x00009b04, 0x00000001 },
+    { 0x00009b08, 0x00000002 },
+    { 0x00009b0c, 0x00000003 },
+    { 0x00009b10, 0x00000004 },
+    { 0x00009b14, 0x00000005 },
+    { 0x00009b18, 0x00000008 },
+    { 0x00009b1c, 0x00000009 },
+    { 0x00009b20, 0x0000000a },
+    { 0x00009b24, 0x0000000b },
+    { 0x00009b28, 0x0000000c },
+    { 0x00009b2c, 0x0000000d },
+    { 0x00009b30, 0x00000010 },
+    { 0x00009b34, 0x00000011 },
+    { 0x00009b38, 0x00000012 },
+    { 0x00009b3c, 0x00000013 },
+    { 0x00009b40, 0x00000014 },
+    { 0x00009b44, 0x00000015 },
+    { 0x00009b48, 0x00000018 },
+    { 0x00009b4c, 0x00000019 },
+    { 0x00009b50, 0x0000001a },
+    { 0x00009b54, 0x0000001b },
+    { 0x00009b58, 0x0000001c },
+    { 0x00009b5c, 0x0000001d },
+    { 0x00009b60, 0x00000020 },
+    { 0x00009b64, 0x00000021 },
+    { 0x00009b68, 0x00000022 },
+    { 0x00009b6c, 0x00000023 },
+    { 0x00009b70, 0x00000024 },
+    { 0x00009b74, 0x00000025 },
+    { 0x00009b78, 0x00000028 },
+    { 0x00009b7c, 0x00000029 },
+    { 0x00009b80, 0x0000002a },
+    { 0x00009b84, 0x0000002b },
+    { 0x00009b88, 0x0000002c },
+    { 0x00009b8c, 0x0000002d },
+    { 0x00009b90, 0x00000030 },
+    { 0x00009b94, 0x00000031 },
+    { 0x00009b98, 0x00000032 },
+    { 0x00009b9c, 0x00000033 },
+    { 0x00009ba0, 0x00000034 },
+    { 0x00009ba4, 0x00000035 },
+    { 0x00009ba8, 0x00000035 },
+    { 0x00009bac, 0x00000035 },
+    { 0x00009bb0, 0x00000035 },
+    { 0x00009bb4, 0x00000035 },
+    { 0x00009bb8, 0x00000035 },
+    { 0x00009bbc, 0x00000035 },
+    { 0x00009bc0, 0x00000035 },
+    { 0x00009bc4, 0x00000035 },
+    { 0x00009bc8, 0x00000035 },
+    { 0x00009bcc, 0x00000035 },
+    { 0x00009bd0, 0x00000035 },
+    { 0x00009bd4, 0x00000035 },
+    { 0x00009bd8, 0x00000035 },
+    { 0x00009bdc, 0x00000035 },
+    { 0x00009be0, 0x00000035 },
+    { 0x00009be4, 0x00000035 },
+    { 0x00009be8, 0x00000035 },
+    { 0x00009bec, 0x00000035 },
+    { 0x00009bf0, 0x00000035 },
+    { 0x00009bf4, 0x00000035 },
+    { 0x00009bf8, 0x00000010 },
+    { 0x00009bfc, 0x0000001a },
+    { 0x0000a210, 0x40806333 },
+    { 0x0000a214, 0x00106c10 },
+    { 0x0000a218, 0x009c4060 },
+    { 0x0000a220, 0x018830c6 },
+    { 0x0000a224, 0x00000400 },
+    { 0x0000a228, 0x001a0bb5 },
+    { 0x0000a22c, 0x00000000 },
+    { 0x0000a234, 0x20202020 },
+    { 0x0000a238, 0x20202020 },
+    { 0x0000a23c, 0x13c889ae },
+    { 0x0000a240, 0x38490a20 },
+    { 0x0000a244, 0x00007bb6 },
+    { 0x0000a248, 0x0fff3ffc },
+    { 0x0000a24c, 0x00000001 },
+    { 0x0000a250, 0x0000a000 },
+    { 0x0000a254, 0x00000000 },
+    { 0x0000a258, 0x0cc75380 },
+    { 0x0000a25c, 0x0f0f0f01 },
+    { 0x0000a260, 0xdfa91f01 },
+    { 0x0000a268, 0x00000001 },
+    { 0x0000a26c, 0x0ebae9c6 },
+    { 0x0000b26c, 0x0ebae9c6 },
+    { 0x0000c26c, 0x0ebae9c6 },
+    { 0x0000d270, 0x00820820 },
+    { 0x0000a278, 0x1ce739ce },
+    { 0x0000a27c, 0x050701ce },
+    { 0x0000a338, 0x00000000 },
+    { 0x0000a33c, 0x00000000 },
+    { 0x0000a340, 0x00000000 },
+    { 0x0000a344, 0x00000000 },
+    { 0x0000a348, 0x3fffffff },
+    { 0x0000a34c, 0x3fffffff },
+    { 0x0000a350, 0x3fffffff },
+    { 0x0000a354, 0x0003ffff },
+    { 0x0000a358, 0x79a8aa33 },
+    { 0x0000d35c, 0x07ffffef },
+    { 0x0000d360, 0x0fffffe7 },
+    { 0x0000d364, 0x17ffffe5 },
+    { 0x0000d368, 0x1fffffe4 },
+    { 0x0000d36c, 0x37ffffe3 },
+    { 0x0000d370, 0x3fffffe3 },
+    { 0x0000d374, 0x57ffffe3 },
+    { 0x0000d378, 0x5fffffe2 },
+    { 0x0000d37c, 0x7fffffe2 },
+    { 0x0000d380, 0x7f3c7bba },
+    { 0x0000d384, 0xf3307ff0 },
+    { 0x0000a388, 0x0c000000 },
+    { 0x0000a38c, 0x20202020 },
+    { 0x0000a390, 0x20202020 },
+    { 0x0000a394, 0x1ce739ce },
+    { 0x0000a398, 0x000001ce },
+    { 0x0000a39c, 0x00000001 },
+    { 0x0000a3a0, 0x00000000 },
+    { 0x0000a3a4, 0x00000000 },
+    { 0x0000a3a8, 0x00000000 },
+    { 0x0000a3ac, 0x00000000 },
+    { 0x0000a3b0, 0x00000000 },
+    { 0x0000a3b4, 0x00000000 },
+    { 0x0000a3b8, 0x00000000 },
+    { 0x0000a3bc, 0x00000000 },
+    { 0x0000a3c0, 0x00000000 },
+    { 0x0000a3c4, 0x00000000 },
+    { 0x0000a3c8, 0x00000246 },
+    { 0x0000a3cc, 0x20202020 },
+    { 0x0000a3d0, 0x20202020 },
+    { 0x0000a3d4, 0x20202020 },
+    { 0x0000a3dc, 0x1ce739ce },
+    { 0x0000a3e0, 0x000001ce },
+};
+
+static const u32 ar5416Bank0[][2] = {
+    { 0x000098b0, 0x1e5795e5 },
+    { 0x000098e0, 0x02008020 },
+};
+
+static const u32 ar5416BB_RfGain[][3] = {
+    { 0x00009a00, 0x00000000, 0x00000000 },
+    { 0x00009a04, 0x00000040, 0x00000040 },
+    { 0x00009a08, 0x00000080, 0x00000080 },
+    { 0x00009a0c, 0x000001a1, 0x00000141 },
+    { 0x00009a10, 0x000001e1, 0x00000181 },
+    { 0x00009a14, 0x00000021, 0x000001c1 },
+    { 0x00009a18, 0x00000061, 0x00000001 },
+    { 0x00009a1c, 0x00000168, 0x00000041 },
+    { 0x00009a20, 0x000001a8, 0x000001a8 },
+    { 0x00009a24, 0x000001e8, 0x000001e8 },
+    { 0x00009a28, 0x00000028, 0x00000028 },
+    { 0x00009a2c, 0x00000068, 0x00000068 },
+    { 0x00009a30, 0x00000189, 0x000000a8 },
+    { 0x00009a34, 0x000001c9, 0x00000169 },
+    { 0x00009a38, 0x00000009, 0x000001a9 },
+    { 0x00009a3c, 0x00000049, 0x000001e9 },
+    { 0x00009a40, 0x00000089, 0x00000029 },
+    { 0x00009a44, 0x00000170, 0x00000069 },
+    { 0x00009a48, 0x000001b0, 0x00000190 },
+    { 0x00009a4c, 0x000001f0, 0x000001d0 },
+    { 0x00009a50, 0x00000030, 0x00000010 },
+    { 0x00009a54, 0x00000070, 0x00000050 },
+    { 0x00009a58, 0x00000191, 0x00000090 },
+    { 0x00009a5c, 0x000001d1, 0x00000151 },
+    { 0x00009a60, 0x00000011, 0x00000191 },
+    { 0x00009a64, 0x00000051, 0x000001d1 },
+    { 0x00009a68, 0x00000091, 0x00000011 },
+    { 0x00009a6c, 0x000001b8, 0x00000051 },
+    { 0x00009a70, 0x000001f8, 0x00000198 },
+    { 0x00009a74, 0x00000038, 0x000001d8 },
+    { 0x00009a78, 0x00000078, 0x00000018 },
+    { 0x00009a7c, 0x00000199, 0x00000058 },
+    { 0x00009a80, 0x000001d9, 0x00000098 },
+    { 0x00009a84, 0x00000019, 0x00000159 },
+    { 0x00009a88, 0x00000059, 0x00000199 },
+    { 0x00009a8c, 0x00000099, 0x000001d9 },
+    { 0x00009a90, 0x000000d9, 0x00000019 },
+    { 0x00009a94, 0x000000f9, 0x00000059 },
+    { 0x00009a98, 0x000000f9, 0x00000099 },
+    { 0x00009a9c, 0x000000f9, 0x000000d9 },
+    { 0x00009aa0, 0x000000f9, 0x000000f9 },
+    { 0x00009aa4, 0x000000f9, 0x000000f9 },
+    { 0x00009aa8, 0x000000f9, 0x000000f9 },
+    { 0x00009aac, 0x000000f9, 0x000000f9 },
+    { 0x00009ab0, 0x000000f9, 0x000000f9 },
+    { 0x00009ab4, 0x000000f9, 0x000000f9 },
+    { 0x00009ab8, 0x000000f9, 0x000000f9 },
+    { 0x00009abc, 0x000000f9, 0x000000f9 },
+    { 0x00009ac0, 0x000000f9, 0x000000f9 },
+    { 0x00009ac4, 0x000000f9, 0x000000f9 },
+    { 0x00009ac8, 0x000000f9, 0x000000f9 },
+    { 0x00009acc, 0x000000f9, 0x000000f9 },
+    { 0x00009ad0, 0x000000f9, 0x000000f9 },
+    { 0x00009ad4, 0x000000f9, 0x000000f9 },
+    { 0x00009ad8, 0x000000f9, 0x000000f9 },
+    { 0x00009adc, 0x000000f9, 0x000000f9 },
+    { 0x00009ae0, 0x000000f9, 0x000000f9 },
+    { 0x00009ae4, 0x000000f9, 0x000000f9 },
+    { 0x00009ae8, 0x000000f9, 0x000000f9 },
+    { 0x00009aec, 0x000000f9, 0x000000f9 },
+    { 0x00009af0, 0x000000f9, 0x000000f9 },
+    { 0x00009af4, 0x000000f9, 0x000000f9 },
+    { 0x00009af8, 0x000000f9, 0x000000f9 },
+    { 0x00009afc, 0x000000f9, 0x000000f9 },
+};
+
+static const u32 ar5416Bank1[][2] = {
+    { 0x000098b0, 0x02108421},
+    { 0x000098ec, 0x00000008},
+};
+
+static const u32 ar5416Bank2[][2] = {
+    { 0x000098b0, 0x0e73ff17},
+    { 0x000098e0, 0x00000420},
+};
+
+static const u32 ar5416Bank3[][3] = {
+    { 0x000098f0, 0x01400018, 0x01c00018 },
+};
+
+static const u32 ar5416Bank6[][3] = {
+
+    { 0x0000989c, 0x00000000, 0x00000000 },
+    { 0x0000989c, 0x00000000, 0x00000000 },
+    { 0x0000989c, 0x00000000, 0x00000000 },
+    { 0x0000989c, 0x00e00000, 0x00e00000 },
+    { 0x0000989c, 0x005e0000, 0x005e0000 },
+    { 0x0000989c, 0x00120000, 0x00120000 },
+    { 0x0000989c, 0x00620000, 0x00620000 },
+    { 0x0000989c, 0x00020000, 0x00020000 },
+    { 0x0000989c, 0x00ff0000, 0x00ff0000 },
+    { 0x0000989c, 0x00ff0000, 0x00ff0000 },
+    { 0x0000989c, 0x00ff0000, 0x00ff0000 },
+    { 0x0000989c, 0x00ff0000, 0x00ff0000 },
+    { 0x0000989c, 0x005f0000, 0x005f0000 },
+    { 0x0000989c, 0x00870000, 0x00870000 },
+    { 0x0000989c, 0x00f90000, 0x00f90000 },
+    { 0x0000989c, 0x007b0000, 0x007b0000 },
+    { 0x0000989c, 0x00ff0000, 0x00ff0000 },
+    { 0x0000989c, 0x00f50000, 0x00f50000 },
+    { 0x0000989c, 0x00dc0000, 0x00dc0000 },
+    { 0x0000989c, 0x00110000, 0x00110000 },
+    { 0x0000989c, 0x006100a8, 0x006100a8 },
+    { 0x0000989c, 0x004210a2, 0x004210a2 },
+    { 0x0000989c, 0x0014000f, 0x0014000f },
+    { 0x0000989c, 0x00c40002, 0x00c40002 },
+    { 0x0000989c, 0x003000f2, 0x003000f2 },
+    { 0x0000989c, 0x00440016, 0x00440016 },
+    { 0x0000989c, 0x00410040, 0x00410040 },
+    { 0x0000989c, 0x000180d6, 0x000180d6 },
+    { 0x0000989c, 0x0000c0aa, 0x0000c0aa },
+    { 0x0000989c, 0x000000b1, 0x000000b1 },
+    { 0x0000989c, 0x00002000, 0x00002000 },
+    { 0x0000989c, 0x000000d4, 0x000000d4 },
+    { 0x000098d0, 0x0000000f, 0x0010000f },
+};
+
+
+static const u32 ar5416Bank6TPC[][3] = {
+
+    { 0x0000989c, 0x00000000, 0x00000000 },
+    { 0x0000989c, 0x00000000, 0x00000000 },
+    { 0x0000989c, 0x00000000, 0x00000000 },
+    { 0x0000989c, 0x00e00000, 0x00e00000 },
+    { 0x0000989c, 0x005e0000, 0x005e0000 },
+    { 0x0000989c, 0x00120000, 0x00120000 },
+    { 0x0000989c, 0x00620000, 0x00620000 },
+    { 0x0000989c, 0x00020000, 0x00020000 },
+    { 0x0000989c, 0x00ff0000, 0x00ff0000 },
+    { 0x0000989c, 0x00ff0000, 0x00ff0000 },
+    { 0x0000989c, 0x00ff0000, 0x00ff0000 },
+    { 0x0000989c, 0x40ff0000, 0x40ff0000 },
+    { 0x0000989c, 0x005f0000, 0x005f0000 },
+    { 0x0000989c, 0x00870000, 0x00870000 },
+    { 0x0000989c, 0x00f90000, 0x00f90000 },
+    { 0x0000989c, 0x007b0000, 0x007b0000 },
+    { 0x0000989c, 0x00ff0000, 0x00ff0000 },
+    { 0x0000989c, 0x00f50000, 0x00f50000 },
+    { 0x0000989c, 0x00dc0000, 0x00dc0000 },
+    { 0x0000989c, 0x00110000, 0x00110000 },
+    { 0x0000989c, 0x006100a8, 0x006100a8 },
+    { 0x0000989c, 0x00423022, 0x00423022 },
+    { 0x0000989c, 0x2014008f, 0x2014008f },
+    { 0x0000989c, 0x00c40002, 0x00c40002 },
+    { 0x0000989c, 0x003000f2, 0x003000f2 },
+    { 0x0000989c, 0x00440016, 0x00440016 },
+    { 0x0000989c, 0x00410040, 0x00410040 },
+    { 0x0000989c, 0x0001805e, 0x0001805e },
+    { 0x0000989c, 0x0000c0ab, 0x0000c0ab },
+    { 0x0000989c, 0x000000e1, 0x000000e1 },
+    { 0x0000989c, 0x00007080, 0x00007080 },
+    { 0x0000989c, 0x000000d4, 0x000000d4 },
+    { 0x000098d0, 0x0000000f, 0x0010000f },
+};
+
+static const u32 ar5416Bank7[][2] = {
+    { 0x0000989c, 0x00000500 },
+    { 0x0000989c, 0x00000800 },
+    { 0x000098cc, 0x0000000e },
+};
+
+static const u32 ar5416Addac[][2] = {
+    {0x0000989c, 0x00000000 },
+    {0x0000989c, 0x00000000 },
+    {0x0000989c, 0x00000000 },
+    {0x0000989c, 0x00000000 },
+    {0x0000989c, 0x00000000 },
+    {0x0000989c, 0x00000000 },
+    {0x0000989c, 0x00000000 },
+    {0x0000989c, 0x00000010 },
+    {0x0000989c, 0x00000000 },
+    {0x0000989c, 0x00000000 },
+    {0x0000989c, 0x00000000 },
+    {0x0000989c, 0x00000000 },
+    {0x0000989c, 0x00000000 },
+    {0x0000989c, 0x00000000 },
+    {0x0000989c, 0x00000000 },
+    {0x0000989c, 0x00000000 },
+    {0x0000989c, 0x00000000 },
+    {0x0000989c, 0x00000000 },
+    {0x0000989c, 0x00000000 },
+    {0x0000989c, 0x00000000 },
+    {0x0000989c, 0x00000000 },
+    {0x0000989c, 0x000000c0 },
+    {0x0000989c, 0x00000015 },
+    {0x0000989c, 0x00000000 },
+    {0x0000989c, 0x00000000 },
+    {0x0000989c, 0x00000000 },
+    {0x0000989c, 0x00000000 },
+    {0x0000989c, 0x00000000 },
+    {0x0000989c, 0x00000000 },
+    {0x0000989c, 0x00000000 },
+    {0x0000989c, 0x00000000 },
+    {0x000098cc, 0x00000000 },
+};
+
+
+static const u32 ar5416Modes_9160[][6] = {
+    { 0x00001030, 0x00000230, 0x00000460, 0x000002c0, 0x00000160, 0x000001e0 },
+    { 0x00001070, 0x00000168, 0x000002d0, 0x00000318, 0x0000018c, 0x000001e0 },
+    { 0x000010b0, 0x00000e60, 0x00001cc0, 0x00007c70, 0x00003e38, 0x00001180 },
+    { 0x000010f0, 0x0000a000, 0x00014000, 0x00016000, 0x0000b000, 0x00014008 },
+    { 0x00008014, 0x03e803e8, 0x07d007d0, 0x10801600, 0x08400b00, 0x06e006e0 },
+    { 0x0000801c, 0x128d93a7, 0x128d93cf, 0x12e013d7, 0x12e013ab, 0x098813cf },
+    { 0x00009804, 0x00000300, 0x000003c4, 0x000003c4, 0x00000300, 0x00000303 },
+    { 0x00009820, 0x02020200, 0x02020200, 0x02020200, 0x02020200, 0x02020200 },
+    { 0x00009824, 0x00000e0e, 0x00000e0e, 0x00000e0e, 0x00000e0e, 0x00000e0e },
+    { 0x00009828, 0x0a020001, 0x0a020001, 0x0a020001, 0x0a020001, 0x0a020001 },
+    { 0x00009834, 0x00000e0e, 0x00000e0e, 0x00000e0e, 0x00000e0e, 0x00000e0e },
+    { 0x00009838, 0x00000007, 0x00000007, 0x00000007, 0x00000007, 0x00000007 },
+    { 0x00009844, 0x0372161e, 0x0372161e, 0x037216a0, 0x037216a0, 0x037216a0 },
+    { 0x00009848, 0x001a6a65, 0x001a6a65, 0x00197a68, 0x00197a68, 0x00197a68 },
+    { 0x0000a848, 0x001a6a65, 0x001a6a65, 0x00197a68, 0x00197a68, 0x00197a68 },
+    { 0x0000b848, 0x001a6a65, 0x001a6a65, 0x00197a68, 0x00197a68, 0x00197a68 },
+    { 0x00009850, 0x6d48b4e2, 0x6d48b4e2, 0x6d48b0e2, 0x6d48b0e2, 0x6d48b0e2 },
+    { 0x00009858, 0x7ec82d2e, 0x7ec82d2e, 0x7ec82d2e, 0x7ec82d2e, 0x7ec82d2e },
+    { 0x0000985c, 0x3139605e, 0x3139605e, 0x3139605e, 0x3139605e, 0x3139605e },
+    { 0x00009860, 0x00048d18, 0x00048d18, 0x00048d20, 0x00048d20, 0x00048d18 },
+    { 0x0000c864, 0x0001ce00, 0x0001ce00, 0x0001ce00, 0x0001ce00, 0x0001ce00 },
+    { 0x00009868, 0x409a40d0, 0x409a40d0, 0x409a40d0, 0x409a40d0, 0x409a40d0 },
+    { 0x0000986c, 0x050cb081, 0x050cb081, 0x050cb081, 0x050cb081, 0x050cb081 },
+    { 0x00009914, 0x000007d0, 0x000007d0, 0x00000898, 0x00000898, 0x000007d0 },
+    { 0x00009918, 0x0000000a, 0x00000014, 0x00000016, 0x0000000b, 0x00000016 },
+    { 0x00009924, 0xd00a8a07, 0xd00a8a07, 0xd00a8a0d, 0xd00a8a0d, 0xd00a8a0d },
+    { 0x00009944, 0xdfb81020, 0xdfb81020, 0xdfb81020, 0xdfb81020, 0xdfb81020 },
+    { 0x00009960, 0x00009b40, 0x00009b40, 0x00009b40, 0x00009b40, 0x00009b40 },
+    { 0x0000a960, 0x00009b40, 0x00009b40, 0x00009b40, 0x00009b40, 0x00009b40 },
+    { 0x0000b960, 0x00009b40, 0x00009b40, 0x00009b40, 0x00009b40, 0x00009b40 },
+    { 0x00009964, 0x00001120, 0x00001120, 0x00001120, 0x00001120, 0x00001120 },
+    { 0x0000c9bc, 0x001a0600, 0x001a0600, 0x001a0c00, 0x001a0c00, 0x001a0c00 },
+    { 0x000099c0, 0x038919be, 0x038919be, 0x038919be, 0x038919be, 0x038919be },
+    { 0x000099c4, 0x06336f77, 0x06336f77, 0x06336f77, 0x06336f77, 0x06336f77 },
+    { 0x000099c8, 0x60f65329, 0x60f65329, 0x60f65329, 0x60f65329, 0x60f65329 },
+    { 0x000099cc, 0x08f186c8, 0x08f186c8, 0x08f186c8, 0x08f186c8, 0x08f186c8 },
+    { 0x000099d0, 0x00046384, 0x00046384, 0x00046384, 0x00046384, 0x00046384 },
+    { 0x000099d4, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 },
+    { 0x000099d8, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 },
+    { 0x0000a204, 0x00000880, 0x00000880, 0x00000880, 0x00000880, 0x00000880 },
+    { 0x0000a208, 0xd6be4788, 0xd6be4788, 0xd03e4788, 0xd03e4788, 0xd03e4788 },
+    { 0x0000a20c, 0x002fc160, 0x002fc160, 0x002ac120, 0x002ac120, 0x002ac120 },
+    { 0x0000b20c, 0x002fc160, 0x002fc160, 0x002ac120, 0x002ac120, 0x002ac120 },
+    { 0x0000c20c, 0x002fc160, 0x002fc160, 0x002ac120, 0x002ac120, 0x002ac120 },
+    { 0x0000a21c, 0x1883800a, 0x1883800a, 0x1883800a, 0x1883800a, 0x1883800a },
+    { 0x0000a230, 0x00000000, 0x00000000, 0x00000210, 0x00000108, 0x00000000 },
+    { 0x0000a274, 0x0a1a9caa, 0x0a1a9caa, 0x0a1a7caa, 0x0a1a7caa, 0x0a1a7caa },
+    { 0x0000a300, 0x18010000, 0x18010000, 0x18010000, 0x18010000, 0x18010000 },
+    { 0x0000a304, 0x30032602, 0x30032602, 0x2e032402, 0x2e032402, 0x2e032402 },
+    { 0x0000a308, 0x48073e06, 0x48073e06, 0x4a0a3c06, 0x4a0a3c06, 0x4a0a3c06 },
+    { 0x0000a30c, 0x560b4c0a, 0x560b4c0a, 0x621a540b, 0x621a540b, 0x621a540b },
+    { 0x0000a310, 0x641a600f, 0x641a600f, 0x764f6c1b, 0x764f6c1b, 0x764f6c1b },
+    { 0x0000a314, 0x7a4f6e1b, 0x7a4f6e1b, 0x845b7a5a, 0x845b7a5a, 0x845b7a5a },
+    { 0x0000a318, 0x8c5b7e5a, 0x8c5b7e5a, 0x950f8ccf, 0x950f8ccf, 0x950f8ccf },
+    { 0x0000a31c, 0x9d0f96cf, 0x9d0f96cf, 0xa5cf9b4f, 0xa5cf9b4f, 0xa5cf9b4f },
+    { 0x0000a320, 0xb51fa69f, 0xb51fa69f, 0xbddfaf1f, 0xbddfaf1f, 0xbddfaf1f },
+    { 0x0000a324, 0xcb3fbd07, 0xcb3fbcbf, 0xd1ffc93f, 0xd1ffc93f, 0xd1ffc93f },
+    { 0x0000a328, 0x0000d7bf, 0x0000d7bf, 0x00000000, 0x00000000, 0x00000000 },
+    { 0x0000a32c, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 },
+    { 0x0000a330, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 },
+    { 0x0000a334, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 },
+};
+
+static const u32 ar5416Common_9160[][2] = {
+    { 0x0000000c, 0x00000000 },
+    { 0x00000030, 0x00020015 },
+    { 0x00000034, 0x00000005 },
+    { 0x00000040, 0x00000000 },
+    { 0x00000044, 0x00000008 },
+    { 0x00000048, 0x00000008 },
+    { 0x0000004c, 0x00000010 },
+    { 0x00000050, 0x00000000 },
+    { 0x00000054, 0x0000001f },
+    { 0x00000800, 0x00000000 },
+    { 0x00000804, 0x00000000 },
+    { 0x00000808, 0x00000000 },
+    { 0x0000080c, 0x00000000 },
+    { 0x00000810, 0x00000000 },
+    { 0x00000814, 0x00000000 },
+    { 0x00000818, 0x00000000 },
+    { 0x0000081c, 0x00000000 },
+    { 0x00000820, 0x00000000 },
+    { 0x00000824, 0x00000000 },
+    { 0x00001040, 0x002ffc0f },
+    { 0x00001044, 0x002ffc0f },
+    { 0x00001048, 0x002ffc0f },
+    { 0x0000104c, 0x002ffc0f },
+    { 0x00001050, 0x002ffc0f },
+    { 0x00001054, 0x002ffc0f },
+    { 0x00001058, 0x002ffc0f },
+    { 0x0000105c, 0x002ffc0f },
+    { 0x00001060, 0x002ffc0f },
+    { 0x00001064, 0x002ffc0f },
+    { 0x00001230, 0x00000000 },
+    { 0x00001270, 0x00000000 },
+    { 0x00001038, 0x00000000 },
+    { 0x00001078, 0x00000000 },
+    { 0x000010b8, 0x00000000 },
+    { 0x000010f8, 0x00000000 },
+    { 0x00001138, 0x00000000 },
+    { 0x00001178, 0x00000000 },
+    { 0x000011b8, 0x00000000 },
+    { 0x000011f8, 0x00000000 },
+    { 0x00001238, 0x00000000 },
+    { 0x00001278, 0x00000000 },
+    { 0x000012b8, 0x00000000 },
+    { 0x000012f8, 0x00000000 },
+    { 0x00001338, 0x00000000 },
+    { 0x00001378, 0x00000000 },
+    { 0x000013b8, 0x00000000 },
+    { 0x000013f8, 0x00000000 },
+    { 0x00001438, 0x00000000 },
+    { 0x00001478, 0x00000000 },
+    { 0x000014b8, 0x00000000 },
+    { 0x000014f8, 0x00000000 },
+    { 0x00001538, 0x00000000 },
+    { 0x00001578, 0x00000000 },
+    { 0x000015b8, 0x00000000 },
+    { 0x000015f8, 0x00000000 },
+    { 0x00001638, 0x00000000 },
+    { 0x00001678, 0x00000000 },
+    { 0x000016b8, 0x00000000 },
+    { 0x000016f8, 0x00000000 },
+    { 0x00001738, 0x00000000 },
+    { 0x00001778, 0x00000000 },
+    { 0x000017b8, 0x00000000 },
+    { 0x000017f8, 0x00000000 },
+    { 0x0000103c, 0x00000000 },
+    { 0x0000107c, 0x00000000 },
+    { 0x000010bc, 0x00000000 },
+    { 0x000010fc, 0x00000000 },
+    { 0x0000113c, 0x00000000 },
+    { 0x0000117c, 0x00000000 },
+    { 0x000011bc, 0x00000000 },
+    { 0x000011fc, 0x00000000 },
+    { 0x0000123c, 0x00000000 },
+    { 0x0000127c, 0x00000000 },
+    { 0x000012bc, 0x00000000 },
+    { 0x000012fc, 0x00000000 },
+    { 0x0000133c, 0x00000000 },
+    { 0x0000137c, 0x00000000 },
+    { 0x000013bc, 0x00000000 },
+    { 0x000013fc, 0x00000000 },
+    { 0x0000143c, 0x00000000 },
+    { 0x0000147c, 0x00000000 },
+    { 0x00004030, 0x00000002 },
+    { 0x0000403c, 0x00000002 },
+    { 0x00007010, 0x00000020 },
+    { 0x00007038, 0x000004c2 },
+    { 0x00008004, 0x00000000 },
+    { 0x00008008, 0x00000000 },
+    { 0x0000800c, 0x00000000 },
+    { 0x00008018, 0x00000700 },
+    { 0x00008020, 0x00000000 },
+    { 0x00008038, 0x00000000 },
+    { 0x0000803c, 0x00000000 },
+    { 0x00008048, 0x40000000 },
+    { 0x00008054, 0x00000000 },
+    { 0x00008058, 0x00000000 },
+    { 0x0000805c, 0x000fc78f },
+    { 0x00008060, 0x0000000f },
+    { 0x00008064, 0x00000000 },
+    { 0x000080c0, 0x2a82301a },
+    { 0x000080c4, 0x05dc01e0 },
+    { 0x000080c8, 0x1f402710 },
+    { 0x000080cc, 0x01f40000 },
+    { 0x000080d0, 0x00001e00 },
+    { 0x000080d4, 0x00000000 },
+    { 0x000080d8, 0x00400000 },
+    { 0x000080e0, 0xffffffff },
+    { 0x000080e4, 0x0000ffff },
+    { 0x000080e8, 0x003f3f3f },
+    { 0x000080ec, 0x00000000 },
+    { 0x000080f0, 0x00000000 },
+    { 0x000080f4, 0x00000000 },
+    { 0x000080f8, 0x00000000 },
+    { 0x000080fc, 0x00020000 },
+    { 0x00008100, 0x00020000 },
+    { 0x00008104, 0x00000001 },
+    { 0x00008108, 0x00000052 },
+    { 0x0000810c, 0x00000000 },
+    { 0x00008110, 0x00000168 },
+    { 0x00008118, 0x000100aa },
+    { 0x0000811c, 0x00003210 },
+    { 0x00008120, 0x08f04800 },
+    { 0x00008124, 0x00000000 },
+    { 0x00008128, 0x00000000 },
+    { 0x0000812c, 0x00000000 },
+    { 0x00008130, 0x00000000 },
+    { 0x00008134, 0x00000000 },
+    { 0x00008138, 0x00000000 },
+    { 0x0000813c, 0x00000000 },
+    { 0x00008144, 0x00000000 },
+    { 0x00008168, 0x00000000 },
+    { 0x0000816c, 0x00000000 },
+    { 0x00008170, 0x32143320 },
+    { 0x00008174, 0xfaa4fa50 },
+    { 0x00008178, 0x00000100 },
+    { 0x0000817c, 0x00000000 },
+    { 0x000081c4, 0x00000000 },
+    { 0x000081d0, 0x00003210 },
+    { 0x000081ec, 0x00000000 },
+    { 0x000081f0, 0x00000000 },
+    { 0x000081f4, 0x00000000 },
+    { 0x000081f8, 0x00000000 },
+    { 0x000081fc, 0x00000000 },
+    { 0x00008200, 0x00000000 },
+    { 0x00008204, 0x00000000 },
+    { 0x00008208, 0x00000000 },
+    { 0x0000820c, 0x00000000 },
+    { 0x00008210, 0x00000000 },
+    { 0x00008214, 0x00000000 },
+    { 0x00008218, 0x00000000 },
+    { 0x0000821c, 0x00000000 },
+    { 0x00008220, 0x00000000 },
+    { 0x00008224, 0x00000000 },
+    { 0x00008228, 0x00000000 },
+    { 0x0000822c, 0x00000000 },
+    { 0x00008230, 0x00000000 },
+    { 0x00008234, 0x00000000 },
+    { 0x00008238, 0x00000000 },
+    { 0x0000823c, 0x00000000 },
+    { 0x00008240, 0x00100000 },
+    { 0x00008244, 0x0010f400 },
+    { 0x00008248, 0x00000100 },
+    { 0x0000824c, 0x0001e800 },
+    { 0x00008250, 0x00000000 },
+    { 0x00008254, 0x00000000 },
+    { 0x00008258, 0x00000000 },
+    { 0x0000825c, 0x400000ff },
+    { 0x00008260, 0x00080922 },
+    { 0x00008270, 0x00000000 },
+    { 0x00008274, 0x40000000 },
+    { 0x00008278, 0x003e4180 },
+    { 0x0000827c, 0x00000000 },
+    { 0x00008284, 0x0000002c },
+    { 0x00008288, 0x0000002c },
+    { 0x0000828c, 0x00000000 },
+    { 0x00008294, 0x00000000 },
+    { 0x00008298, 0x00000000 },
+    { 0x00008300, 0x00000000 },
+    { 0x00008304, 0x00000000 },
+    { 0x00008308, 0x00000000 },
+    { 0x0000830c, 0x00000000 },
+    { 0x00008310, 0x00000000 },
+    { 0x00008314, 0x00000000 },
+    { 0x00008318, 0x00000000 },
+    { 0x00008328, 0x00000000 },
+    { 0x0000832c, 0x00000007 },
+    { 0x00008330, 0x00000302 },
+    { 0x00008334, 0x00000e00 },
+    { 0x00008338, 0x00000000 },
+    { 0x0000833c, 0x00000000 },
+    { 0x00008340, 0x000107ff },
+    { 0x00009808, 0x00000000 },
+    { 0x0000980c, 0xad848e19 },
+    { 0x00009810, 0x7d14e000 },
+    { 0x00009814, 0x9c0a9f6b },
+    { 0x0000981c, 0x00000000 },
+    { 0x0000982c, 0x0000a000 },
+    { 0x00009830, 0x00000000 },
+    { 0x0000983c, 0x00200400 },
+    { 0x00009840, 0x206a01ae },
+    { 0x0000984c, 0x1284233c },
+    { 0x00009854, 0x00000859 },
+    { 0x00009900, 0x00000000 },
+    { 0x00009904, 0x00000000 },
+    { 0x00009908, 0x00000000 },
+    { 0x0000990c, 0x00000000 },
+    { 0x0000991c, 0x10000fff },
+    { 0x00009920, 0x05100000 },
+    { 0x0000a920, 0x05100000 },
+    { 0x0000b920, 0x05100000 },
+    { 0x00009928, 0x00000001 },
+    { 0x0000992c, 0x00000004 },
+    { 0x00009934, 0x1e1f2022 },
+    { 0x00009938, 0x0a0b0c0d },
+    { 0x0000993c, 0x00000000 },
+    { 0x00009948, 0x9280b212 },
+    { 0x0000994c, 0x00020028 },
+    { 0x00009954, 0x5f3ca3de },
+    { 0x00009958, 0x2108ecff },
+    { 0x00009940, 0x00750604 },
+    { 0x0000c95c, 0x004b6a8e },
+    { 0x0000c968, 0x000003ce },
+    { 0x00009970, 0x190fb515 },
+    { 0x00009974, 0x00000000 },
+    { 0x00009978, 0x00000001 },
+    { 0x0000997c, 0x00000000 },
+    { 0x00009980, 0x00000000 },
+    { 0x00009984, 0x00000000 },
+    { 0x00009988, 0x00000000 },
+    { 0x0000998c, 0x00000000 },
+    { 0x00009990, 0x00000000 },
+    { 0x00009994, 0x00000000 },
+    { 0x00009998, 0x00000000 },
+    { 0x0000999c, 0x00000000 },
+    { 0x000099a0, 0x00000000 },
+    { 0x000099a4, 0x00000001 },
+    { 0x000099a8, 0x201fff00 },
+    { 0x000099ac, 0x006f0000 },
+    { 0x000099b0, 0x03051000 },
+    { 0x000099dc, 0x00000000 },
+    { 0x000099e0, 0x00000200 },
+    { 0x000099e4, 0xaaaaaaaa },
+    { 0x000099e8, 0x3c466478 },
+    { 0x000099ec, 0x0cc80caa },
+    { 0x000099fc, 0x00001042 },
+    { 0x00009b00, 0x00000000 },
+    { 0x00009b04, 0x00000001 },
+    { 0x00009b08, 0x00000002 },
+    { 0x00009b0c, 0x00000003 },
+    { 0x00009b10, 0x00000004 },
+    { 0x00009b14, 0x00000005 },
+    { 0x00009b18, 0x00000008 },
+    { 0x00009b1c, 0x00000009 },
+    { 0x00009b20, 0x0000000a },
+    { 0x00009b24, 0x0000000b },
+    { 0x00009b28, 0x0000000c },
+    { 0x00009b2c, 0x0000000d },
+    { 0x00009b30, 0x00000010 },
+    { 0x00009b34, 0x00000011 },
+    { 0x00009b38, 0x00000012 },
+    { 0x00009b3c, 0x00000013 },
+    { 0x00009b40, 0x00000014 },
+    { 0x00009b44, 0x00000015 },
+    { 0x00009b48, 0x00000018 },
+    { 0x00009b4c, 0x00000019 },
+    { 0x00009b50, 0x0000001a },
+    { 0x00009b54, 0x0000001b },
+    { 0x00009b58, 0x0000001c },
+    { 0x00009b5c, 0x0000001d },
+    { 0x00009b60, 0x00000020 },
+    { 0x00009b64, 0x00000021 },
+    { 0x00009b68, 0x00000022 },
+    { 0x00009b6c, 0x00000023 },
+    { 0x00009b70, 0x00000024 },
+    { 0x00009b74, 0x00000025 },
+    { 0x00009b78, 0x00000028 },
+    { 0x00009b7c, 0x00000029 },
+    { 0x00009b80, 0x0000002a },
+    { 0x00009b84, 0x0000002b },
+    { 0x00009b88, 0x0000002c },
+    { 0x00009b8c, 0x0000002d },
+    { 0x00009b90, 0x00000030 },
+    { 0x00009b94, 0x00000031 },
+    { 0x00009b98, 0x00000032 },
+    { 0x00009b9c, 0x00000033 },
+    { 0x00009ba0, 0x00000034 },
+    { 0x00009ba4, 0x00000035 },
+    { 0x00009ba8, 0x00000035 },
+    { 0x00009bac, 0x00000035 },
+    { 0x00009bb0, 0x00000035 },
+    { 0x00009bb4, 0x00000035 },
+    { 0x00009bb8, 0x00000035 },
+    { 0x00009bbc, 0x00000035 },
+    { 0x00009bc0, 0x00000035 },
+    { 0x00009bc4, 0x00000035 },
+    { 0x00009bc8, 0x00000035 },
+    { 0x00009bcc, 0x00000035 },
+    { 0x00009bd0, 0x00000035 },
+    { 0x00009bd4, 0x00000035 },
+    { 0x00009bd8, 0x00000035 },
+    { 0x00009bdc, 0x00000035 },
+    { 0x00009be0, 0x00000035 },
+    { 0x00009be4, 0x00000035 },
+    { 0x00009be8, 0x00000035 },
+    { 0x00009bec, 0x00000035 },
+    { 0x00009bf0, 0x00000035 },
+    { 0x00009bf4, 0x00000035 },
+    { 0x00009bf8, 0x00000010 },
+    { 0x00009bfc, 0x0000001a },
+    { 0x0000a210, 0x40806333 },
+    { 0x0000a214, 0x00106c10 },
+    { 0x0000a218, 0x009c4060 },
+    { 0x0000a220, 0x018830c6 },
+    { 0x0000a224, 0x00000400 },
+    { 0x0000a228, 0x001a0bb5 },
+    { 0x0000a22c, 0x00000000 },
+    { 0x0000a234, 0x20202020 },
+    { 0x0000a238, 0x20202020 },
+    { 0x0000a23c, 0x13c889af },
+    { 0x0000a240, 0x38490a20 },
+    { 0x0000a244, 0x00007bb6 },
+    { 0x0000a248, 0x0fff3ffc },
+    { 0x0000a24c, 0x00000001 },
+    { 0x0000a250, 0x0000a000 },
+    { 0x0000a254, 0x00000000 },
+    { 0x0000a258, 0x0cc75380 },
+    { 0x0000a25c, 0x0f0f0f01 },
+    { 0x0000a260, 0xdfa91f01 },
+    { 0x0000a268, 0x00000001 },
+    { 0x0000a26c, 0x0ebae9c6 },
+    { 0x0000b26c, 0x0ebae9c6 },
+    { 0x0000c26c, 0x0ebae9c6 },
+    { 0x0000d270, 0x00820820 },
+    { 0x0000a278, 0x1ce739ce },
+    { 0x0000a27c, 0x050701ce },
+    { 0x0000a338, 0x00000000 },
+    { 0x0000a33c, 0x00000000 },
+    { 0x0000a340, 0x00000000 },
+    { 0x0000a344, 0x00000000 },
+    { 0x0000a348, 0x3fffffff },
+    { 0x0000a34c, 0x3fffffff },
+    { 0x0000a350, 0x3fffffff },
+    { 0x0000a354, 0x0003ffff },
+    { 0x0000a358, 0x79a8aa33 },
+    { 0x0000d35c, 0x07ffffef },
+    { 0x0000d360, 0x0fffffe7 },
+    { 0x0000d364, 0x17ffffe5 },
+    { 0x0000d368, 0x1fffffe4 },
+    { 0x0000d36c, 0x37ffffe3 },
+    { 0x0000d370, 0x3fffffe3 },
+    { 0x0000d374, 0x57ffffe3 },
+    { 0x0000d378, 0x5fffffe2 },
+    { 0x0000d37c, 0x7fffffe2 },
+    { 0x0000d380, 0x7f3c7bba },
+    { 0x0000d384, 0xf3307ff0 },
+    { 0x0000a388, 0x0c000000 },
+    { 0x0000a38c, 0x20202020 },
+    { 0x0000a390, 0x20202020 },
+    { 0x0000a394, 0x1ce739ce },
+    { 0x0000a398, 0x000001ce },
+    { 0x0000a39c, 0x00000001 },
+    { 0x0000a3a0, 0x00000000 },
+    { 0x0000a3a4, 0x00000000 },
+    { 0x0000a3a8, 0x00000000 },
+    { 0x0000a3ac, 0x00000000 },
+    { 0x0000a3b0, 0x00000000 },
+    { 0x0000a3b4, 0x00000000 },
+    { 0x0000a3b8, 0x00000000 },
+    { 0x0000a3bc, 0x00000000 },
+    { 0x0000a3c0, 0x00000000 },
+    { 0x0000a3c4, 0x00000000 },
+    { 0x0000a3c8, 0x00000246 },
+    { 0x0000a3cc, 0x20202020 },
+    { 0x0000a3d0, 0x20202020 },
+    { 0x0000a3d4, 0x20202020 },
+    { 0x0000a3dc, 0x1ce739ce },
+    { 0x0000a3e0, 0x000001ce },
+};
+
+static const u32 ar5416Bank0_9160[][2] = {
+    { 0x000098b0, 0x1e5795e5 },
+    { 0x000098e0, 0x02008020 },
+};
+
+static const u32 ar5416BB_RfGain_9160[][3] = {
+    { 0x00009a00, 0x00000000, 0x00000000 },
+    { 0x00009a04, 0x00000040, 0x00000040 },
+    { 0x00009a08, 0x00000080, 0x00000080 },
+    { 0x00009a0c, 0x000001a1, 0x00000141 },
+    { 0x00009a10, 0x000001e1, 0x00000181 },
+    { 0x00009a14, 0x00000021, 0x000001c1 },
+    { 0x00009a18, 0x00000061, 0x00000001 },
+    { 0x00009a1c, 0x00000168, 0x00000041 },
+    { 0x00009a20, 0x000001a8, 0x000001a8 },
+    { 0x00009a24, 0x000001e8, 0x000001e8 },
+    { 0x00009a28, 0x00000028, 0x00000028 },
+    { 0x00009a2c, 0x00000068, 0x00000068 },
+    { 0x00009a30, 0x00000189, 0x000000a8 },
+    { 0x00009a34, 0x000001c9, 0x00000169 },
+    { 0x00009a38, 0x00000009, 0x000001a9 },
+    { 0x00009a3c, 0x00000049, 0x000001e9 },
+    { 0x00009a40, 0x00000089, 0x00000029 },
+    { 0x00009a44, 0x00000170, 0x00000069 },
+    { 0x00009a48, 0x000001b0, 0x00000190 },
+    { 0x00009a4c, 0x000001f0, 0x000001d0 },
+    { 0x00009a50, 0x00000030, 0x00000010 },
+    { 0x00009a54, 0x00000070, 0x00000050 },
+    { 0x00009a58, 0x00000191, 0x00000090 },
+    { 0x00009a5c, 0x000001d1, 0x00000151 },
+    { 0x00009a60, 0x00000011, 0x00000191 },
+    { 0x00009a64, 0x00000051, 0x000001d1 },
+    { 0x00009a68, 0x00000091, 0x00000011 },
+    { 0x00009a6c, 0x000001b8, 0x00000051 },
+    { 0x00009a70, 0x000001f8, 0x00000198 },
+    { 0x00009a74, 0x00000038, 0x000001d8 },
+    { 0x00009a78, 0x00000078, 0x00000018 },
+    { 0x00009a7c, 0x00000199, 0x00000058 },
+    { 0x00009a80, 0x000001d9, 0x00000098 },
+    { 0x00009a84, 0x00000019, 0x00000159 },
+    { 0x00009a88, 0x00000059, 0x00000199 },
+    { 0x00009a8c, 0x00000099, 0x000001d9 },
+    { 0x00009a90, 0x000000d9, 0x00000019 },
+    { 0x00009a94, 0x000000f9, 0x00000059 },
+    { 0x00009a98, 0x000000f9, 0x00000099 },
+    { 0x00009a9c, 0x000000f9, 0x000000d9 },
+    { 0x00009aa0, 0x000000f9, 0x000000f9 },
+    { 0x00009aa4, 0x000000f9, 0x000000f9 },
+    { 0x00009aa8, 0x000000f9, 0x000000f9 },
+    { 0x00009aac, 0x000000f9, 0x000000f9 },
+    { 0x00009ab0, 0x000000f9, 0x000000f9 },
+    { 0x00009ab4, 0x000000f9, 0x000000f9 },
+    { 0x00009ab8, 0x000000f9, 0x000000f9 },
+    { 0x00009abc, 0x000000f9, 0x000000f9 },
+    { 0x00009ac0, 0x000000f9, 0x000000f9 },
+    { 0x00009ac4, 0x000000f9, 0x000000f9 },
+    { 0x00009ac8, 0x000000f9, 0x000000f9 },
+    { 0x00009acc, 0x000000f9, 0x000000f9 },
+    { 0x00009ad0, 0x000000f9, 0x000000f9 },
+    { 0x00009ad4, 0x000000f9, 0x000000f9 },
+    { 0x00009ad8, 0x000000f9, 0x000000f9 },
+    { 0x00009adc, 0x000000f9, 0x000000f9 },
+    { 0x00009ae0, 0x000000f9, 0x000000f9 },
+    { 0x00009ae4, 0x000000f9, 0x000000f9 },
+    { 0x00009ae8, 0x000000f9, 0x000000f9 },
+    { 0x00009aec, 0x000000f9, 0x000000f9 },
+    { 0x00009af0, 0x000000f9, 0x000000f9 },
+    { 0x00009af4, 0x000000f9, 0x000000f9 },
+    { 0x00009af8, 0x000000f9, 0x000000f9 },
+    { 0x00009afc, 0x000000f9, 0x000000f9 },
+};
+
+static const u32 ar5416Bank1_9160[][2] = {
+    { 0x000098b0, 0x02108421 },
+    { 0x000098ec, 0x00000008 },
+};
+
+static const u32 ar5416Bank2_9160[][2] = {
+    { 0x000098b0, 0x0e73ff17 },
+    { 0x000098e0, 0x00000420 },
+};
+
+static const u32 ar5416Bank3_9160[][3] = {
+    { 0x000098f0, 0x01400018, 0x01c00018 },
+};
+
+static const u32 ar5416Bank6_9160[][3] = {
+
+    { 0x0000989c, 0x00000000, 0x00000000 },
+    { 0x0000989c, 0x00000000, 0x00000000 },
+    { 0x0000989c, 0x00000000, 0x00000000 },
+    { 0x0000989c, 0x00e00000, 0x00e00000 },
+    { 0x0000989c, 0x005e0000, 0x005e0000 },
+    { 0x0000989c, 0x00120000, 0x00120000 },
+    { 0x0000989c, 0x00620000, 0x00620000 },
+    { 0x0000989c, 0x00020000, 0x00020000 },
+    { 0x0000989c, 0x00ff0000, 0x00ff0000 },
+    { 0x0000989c, 0x00ff0000, 0x00ff0000 },
+    { 0x0000989c, 0x00ff0000, 0x00ff0000 },
+    { 0x0000989c, 0x40ff0000, 0x40ff0000 },
+    { 0x0000989c, 0x005f0000, 0x005f0000 },
+    { 0x0000989c, 0x00870000, 0x00870000 },
+    { 0x0000989c, 0x00f90000, 0x00f90000 },
+    { 0x0000989c, 0x007b0000, 0x007b0000 },
+    { 0x0000989c, 0x00ff0000, 0x00ff0000 },
+    { 0x0000989c, 0x00f50000, 0x00f50000 },
+    { 0x0000989c, 0x00dc0000, 0x00dc0000 },
+    { 0x0000989c, 0x00110000, 0x00110000 },
+    { 0x0000989c, 0x006100a8, 0x006100a8 },
+    { 0x0000989c, 0x004210a2, 0x004210a2 },
+    { 0x0000989c, 0x0014008f, 0x0014008f },
+    { 0x0000989c, 0x00c40003, 0x00c40003 },
+    { 0x0000989c, 0x003000f2, 0x003000f2 },
+    { 0x0000989c, 0x00440016, 0x00440016 },
+    { 0x0000989c, 0x00410040, 0x00410040 },
+    { 0x0000989c, 0x0001805e, 0x0001805e },
+    { 0x0000989c, 0x0000c0ab, 0x0000c0ab },
+    { 0x0000989c, 0x000000f1, 0x000000f1 },
+    { 0x0000989c, 0x00002081, 0x00002081 },
+    { 0x0000989c, 0x000000d4, 0x000000d4 },
+    { 0x000098d0, 0x0000000f, 0x0010000f },
+};
+
+static const u32 ar5416Bank6TPC_9160[][3] = {
+    { 0x0000989c, 0x00000000, 0x00000000 },
+    { 0x0000989c, 0x00000000, 0x00000000 },
+    { 0x0000989c, 0x00000000, 0x00000000 },
+    { 0x0000989c, 0x00e00000, 0x00e00000 },
+    { 0x0000989c, 0x005e0000, 0x005e0000 },
+    { 0x0000989c, 0x00120000, 0x00120000 },
+    { 0x0000989c, 0x00620000, 0x00620000 },
+    { 0x0000989c, 0x00020000, 0x00020000 },
+    { 0x0000989c, 0x00ff0000, 0x00ff0000 },
+    { 0x0000989c, 0x00ff0000, 0x00ff0000 },
+    { 0x0000989c, 0x00ff0000, 0x00ff0000 },
+    { 0x0000989c, 0x40ff0000, 0x40ff0000 },
+    { 0x0000989c, 0x005f0000, 0x005f0000 },
+    { 0x0000989c, 0x00870000, 0x00870000 },
+    { 0x0000989c, 0x00f90000, 0x00f90000 },
+    { 0x0000989c, 0x007b0000, 0x007b0000 },
+    { 0x0000989c, 0x00ff0000, 0x00ff0000 },
+    { 0x0000989c, 0x00f50000, 0x00f50000 },
+    { 0x0000989c, 0x00dc0000, 0x00dc0000 },
+    { 0x0000989c, 0x00110000, 0x00110000 },
+    { 0x0000989c, 0x006100a8, 0x006100a8 },
+    { 0x0000989c, 0x00423022, 0x00423022 },
+    { 0x0000989c, 0x2014008f, 0x2014008f },
+    { 0x0000989c, 0x00c40002, 0x00c40002 },
+    { 0x0000989c, 0x003000f2, 0x003000f2 },
+    { 0x0000989c, 0x00440016, 0x00440016 },
+    { 0x0000989c, 0x00410040, 0x00410040 },
+    { 0x0000989c, 0x0001805e, 0x0001805e },
+    { 0x0000989c, 0x0000c0ab, 0x0000c0ab },
+    { 0x0000989c, 0x000000e1, 0x000000e1 },
+    { 0x0000989c, 0x00007080, 0x00007080 },
+    { 0x0000989c, 0x000000d4, 0x000000d4 },
+    { 0x000098d0, 0x0000000f, 0x0010000f },
+};
+
+static const u32 ar5416Bank7_9160[][2] = {
+    { 0x0000989c, 0x00000500 },
+    { 0x0000989c, 0x00000800 },
+    { 0x000098cc, 0x0000000e },
+};
+
+
+static u32 ar5416Addac_9160[][2] = {
+    {0x0000989c,  0x00000000 },
+    {0x0000989c,  0x00000000 },
+    {0x0000989c,  0x00000000 },
+    {0x0000989c,  0x00000000 },
+    {0x0000989c,  0x00000000 },
+    {0x0000989c,  0x00000000 },
+    {0x0000989c,  0x000000c0 },
+    {0x0000989c,  0x00000018 },
+    {0x0000989c,  0x00000004 },
+    {0x0000989c,  0x00000000 },
+    {0x0000989c,  0x00000000 },
+    {0x0000989c,  0x00000000 },
+    {0x0000989c,  0x00000000 },
+    {0x0000989c,  0x00000000 },
+    {0x0000989c,  0x00000000 },
+    {0x0000989c,  0x00000000 },
+    {0x0000989c,  0x00000000 },
+    {0x0000989c,  0x00000000 },
+    {0x0000989c,  0x00000000 },
+    {0x0000989c,  0x00000000 },
+    {0x0000989c,  0x00000000 },
+    {0x0000989c,  0x000000c0 },
+    {0x0000989c,  0x00000019 },
+    {0x0000989c,  0x00000004 },
+    {0x0000989c,  0x00000000 },
+    {0x0000989c,  0x00000000 },
+    {0x0000989c,  0x00000000 },
+    {0x0000989c,  0x00000004 },
+    {0x0000989c,  0x00000003 },
+    {0x0000989c,  0x00000008 },
+    {0x0000989c,  0x00000000 },
+    {0x000098cc,  0x00000000 },
+};
+
+
+static u32 ar5416Addac_91601_1[][2] = {
+    {0x0000989c,  0x00000000 },
+    {0x0000989c,  0x00000000 },
+    {0x0000989c,  0x00000000 },
+    {0x0000989c,  0x00000000 },
+    {0x0000989c,  0x00000000 },
+    {0x0000989c,  0x00000000 },
+    {0x0000989c,  0x000000c0 },
+    {0x0000989c,  0x00000018 },
+    {0x0000989c,  0x00000004 },
+    {0x0000989c,  0x00000000 },
+    {0x0000989c,  0x00000000 },
+    {0x0000989c,  0x00000000 },
+    {0x0000989c,  0x00000000 },
+    {0x0000989c,  0x00000000 },
+    {0x0000989c,  0x00000000 },
+    {0x0000989c,  0x00000000 },
+    {0x0000989c,  0x00000000 },
+    {0x0000989c,  0x00000000 },
+    {0x0000989c,  0x00000000 },
+    {0x0000989c,  0x00000000 },
+    {0x0000989c,  0x00000000 },
+    {0x0000989c,  0x000000c0 },
+    {0x0000989c,  0x00000019 },
+    {0x0000989c,  0x00000004 },
+    {0x0000989c,  0x00000000 },
+    {0x0000989c,  0x00000000 },
+    {0x0000989c,  0x00000000 },
+    {0x0000989c,  0x00000000 },
+    {0x0000989c,  0x00000000 },
+    {0x0000989c,  0x00000000 },
+    {0x0000989c,  0x00000000 },
+    {0x000098cc,  0x00000000 },
+};
+
+
+
+static const u32 ar9280Modes_9280[][6] = {
+    { 0x00001030, 0x00000230, 0x00000460, 0x000002c0, 0x00000160, 0x000001e0 },
+    { 0x00001070, 0x00000168, 0x000002d0, 0x00000318, 0x0000018c, 0x000001e0 },
+    { 0x000010b0, 0x00000e60, 0x00001cc0, 0x00007c70, 0x00003e38, 0x00001180 },
+    { 0x000010f0, 0x0000a000, 0x00014000, 0x00016000, 0x0000b000, 0x00014008 },
+    { 0x00008014, 0x03e803e8, 0x07d007d0, 0x10801080, 0x08400840, 0x06e006e0 },
+    { 0x0000801c, 0x128d8027, 0x128d804f, 0x12e00057, 0x12e0002b, 0x0988004f },
+    { 0x00009804, 0x00000300, 0x000003c4, 0x000003c4, 0x00000300, 0x00000303 },
+    { 0x00009820, 0x02020200, 0x02020200, 0x02020200, 0x02020200, 0x02020200 },
+    { 0x00009824, 0x00000e0e, 0x00000e0e, 0x00000e0e, 0x00000e0e, 0x00000e0e },
+    { 0x00009828, 0x0a020001, 0x0a020001, 0x0a020001, 0x0a020001, 0x0a020001 },
+    { 0x00009834, 0x00000e0e, 0x00000e0e, 0x00000e0e, 0x00000e0e, 0x00000e0e },
+    { 0x00009838, 0x00000007, 0x00000007, 0x00000007, 0x00000007, 0x00000007 },
+    { 0x00009844, 0x1372161e, 0x1372161e, 0x137216a0, 0x137216a0, 0x137216a0 },
+    { 0x00009848, 0x00028566, 0x00028566, 0x00028563, 0x00028563, 0x00028563 },
+    { 0x0000a848, 0x00028566, 0x00028566, 0x00028563, 0x00028563, 0x00028563 },
+    { 0x00009850, 0x6d4000e2, 0x6d4000e2, 0x6d4000e2, 0x6d4000e2, 0x6d4000e2 },
+    { 0x00009858, 0x7ec82d2e, 0x7ec82d2e, 0x7ec82d2e, 0x7ec82d2e, 0x7ec82d2e },
+    { 0x0000985c, 0x3139605e, 0x3139605e, 0x3139605e, 0x3139605e, 0x3139605e },
+    { 0x00009860, 0x00049d18, 0x00049d18, 0x00049d20, 0x00049d20, 0x00049d18 },
+    { 0x0000c864, 0x0001ce00, 0x0001ce00, 0x0001ce00, 0x0001ce00, 0x0001ce00 },
+    { 0x00009868, 0x5ac64190, 0x5ac64190, 0x5ac64190, 0x5ac64190, 0x5ac64190 },
+    { 0x0000986c, 0x06903081, 0x06903081, 0x06903881, 0x06903881, 0x06903881 },
+    { 0x00009914, 0x000007d0, 0x000007d0, 0x00000898, 0x00000898, 0x000007d0 },
+    { 0x00009918, 0x0000000a, 0x00000014, 0x00000016, 0x0000000b, 0x00000016 },
+    { 0x00009924, 0xd00a8a07, 0xd00a8a07, 0xd00a8a0d, 0xd00a8a0d, 0xd00a8a0d },
+    { 0x00009944, 0xdfbc1010, 0xdfbc1010, 0xdfbc1010, 0xdfbc1010, 0xdfbc1010 },
+    { 0x00009960, 0x00000010, 0x00000010, 0x00000010, 0x00000010, 0x00000010 },
+    { 0x0000a960, 0x00000010, 0x00000010, 0x00000010, 0x00000010, 0x00000010 },
+    { 0x00009964, 0x00000210, 0x00000210, 0x00000210, 0x00000210, 0x00000210 },
+    { 0x0000c9b8, 0x0000001a, 0x0000001a, 0x0000001a, 0x0000001a, 0x0000001a },
+    { 0x0000c9bc, 0x00000600, 0x00000600, 0x00000c00, 0x00000c00, 0x00000c00 },
+    { 0x000099c0, 0x05eea6d4, 0x05eea6d4, 0x05eea6d4, 0x05eea6d4, 0x05eea6d4 },
+    { 0x000099c4, 0x06336f77, 0x06336f77, 0x06336f77, 0x06336f77, 0x06336f77 },
+    { 0x000099c8, 0x60f6532c, 0x60f6532c, 0x60f6532c, 0x60f6532c, 0x60f6532c },
+    { 0x000099cc, 0x08f186c8, 0x08f186c8, 0x08f186c8, 0x08f186c8, 0x08f186c8 },
+    { 0x000099d0, 0x00046384, 0x00046384, 0x00046384, 0x00046384, 0x00046384 },
+    { 0x000099d4, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 },
+    { 0x000099d8, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 },
+    { 0x00009a00, 0x00008184, 0x00008184, 0x00000214, 0x00000214, 0x00000214 },
+    { 0x00009a04, 0x00008188, 0x00008188, 0x00000218, 0x00000218, 0x00000218 },
+    { 0x00009a08, 0x0000818c, 0x0000818c, 0x00000224, 0x00000224, 0x00000224 },
+    { 0x00009a0c, 0x00008190, 0x00008190, 0x00000228, 0x00000228, 0x00000228 },
+    { 0x00009a10, 0x00008194, 0x00008194, 0x0000022c, 0x0000022c, 0x0000022c },
+    { 0x00009a14, 0x00008200, 0x00008200, 0x00000230, 0x00000230, 0x00000230 },
+    { 0x00009a18, 0x00008204, 0x00008204, 0x000002a4, 0x000002a4, 0x000002a4 },
+    { 0x00009a1c, 0x00008208, 0x00008208, 0x000002a8, 0x000002a8, 0x000002a8 },
+    { 0x00009a20, 0x0000820c, 0x0000820c, 0x000002ac, 0x000002ac, 0x000002ac },
+    { 0x00009a24, 0x00008210, 0x00008210, 0x000002b0, 0x000002b0, 0x000002b0 },
+    { 0x00009a28, 0x00008214, 0x00008214, 0x000002b4, 0x000002b4, 0x000002b4 },
+    { 0x00009a2c, 0x00008280, 0x00008280, 0x000002b8, 0x000002b8, 0x000002b8 },
+    { 0x00009a30, 0x00008284, 0x00008284, 0x00000390, 0x00000390, 0x00000390 },
+    { 0x00009a34, 0x00008288, 0x00008288, 0x00000394, 0x00000394, 0x00000394 },
+    { 0x00009a38, 0x0000828c, 0x0000828c, 0x00000398, 0x00000398, 0x00000398 },
+    { 0x00009a3c, 0x00008290, 0x00008290, 0x00000334, 0x00000334, 0x00000334 },
+    { 0x00009a40, 0x00008300, 0x00008300, 0x00000338, 0x00000338, 0x00000338 },
+    { 0x00009a44, 0x00008304, 0x00008304, 0x000003ac, 0x000003ac, 0x000003ac },
+    { 0x00009a48, 0x00008308, 0x00008308, 0x000003b0, 0x000003b0, 0x000003b0 },
+    { 0x00009a4c, 0x0000830c, 0x0000830c, 0x000003b4, 0x000003b4, 0x000003b4 },
+    { 0x00009a50, 0x00008310, 0x00008310, 0x000003b8, 0x000003b8, 0x000003b8 },
+    { 0x00009a54, 0x00008314, 0x00008314, 0x000003a5, 0x000003a5, 0x000003a5 },
+    { 0x00009a58, 0x00008380, 0x00008380, 0x000003a9, 0x000003a9, 0x000003a9 },
+    { 0x00009a5c, 0x00008384, 0x00008384, 0x000003ad, 0x000003ad, 0x000003ad },
+    { 0x00009a60, 0x00008388, 0x00008388, 0x00008194, 0x00008194, 0x00008194 },
+    { 0x00009a64, 0x0000838c, 0x0000838c, 0x000081a0, 0x000081a0, 0x000081a0 },
+    { 0x00009a68, 0x00008390, 0x00008390, 0x0000820c, 0x0000820c, 0x0000820c },
+    { 0x00009a6c, 0x00008394, 0x00008394, 0x000081a8, 0x000081a8, 0x000081a8 },
+    { 0x00009a70, 0x0000a380, 0x0000a380, 0x00008284, 0x00008284, 0x00008284 },
+    { 0x00009a74, 0x0000a384, 0x0000a384, 0x00008288, 0x00008288, 0x00008288 },
+    { 0x00009a78, 0x0000a388, 0x0000a388, 0x00008224, 0x00008224, 0x00008224 },
+    { 0x00009a7c, 0x0000a38c, 0x0000a38c, 0x00008290, 0x00008290, 0x00008290 },
+    { 0x00009a80, 0x0000a390, 0x0000a390, 0x00008300, 0x00008300, 0x00008300 },
+    { 0x00009a84, 0x0000a394, 0x0000a394, 0x00008304, 0x00008304, 0x00008304 },
+    { 0x00009a88, 0x0000a780, 0x0000a780, 0x00008308, 0x00008308, 0x00008308 },
+    { 0x00009a8c, 0x0000a784, 0x0000a784, 0x0000830c, 0x0000830c, 0x0000830c },
+    { 0x00009a90, 0x0000a788, 0x0000a788, 0x00008380, 0x00008380, 0x00008380 },
+    { 0x00009a94, 0x0000a78c, 0x0000a78c, 0x00008384, 0x00008384, 0x00008384 },
+    { 0x00009a98, 0x0000a790, 0x0000a790, 0x00008700, 0x00008700, 0x00008700 },
+    { 0x00009a9c, 0x0000a794, 0x0000a794, 0x00008704, 0x00008704, 0x00008704 },
+    { 0x00009aa0, 0x0000ab84, 0x0000ab84, 0x00008708, 0x00008708, 0x00008708 },
+    { 0x00009aa4, 0x0000ab88, 0x0000ab88, 0x0000870c, 0x0000870c, 0x0000870c },
+    { 0x00009aa8, 0x0000ab8c, 0x0000ab8c, 0x00008780, 0x00008780, 0x00008780 },
+    { 0x00009aac, 0x0000ab90, 0x0000ab90, 0x00008784, 0x00008784, 0x00008784 },
+    { 0x00009ab0, 0x0000ab94, 0x0000ab94, 0x00008b00, 0x00008b00, 0x00008b00 },
+    { 0x00009ab4, 0x0000af80, 0x0000af80, 0x00008b04, 0x00008b04, 0x00008b04 },
+    { 0x00009ab8, 0x0000af84, 0x0000af84, 0x00008b08, 0x00008b08, 0x00008b08 },
+    { 0x00009abc, 0x0000af88, 0x0000af88, 0x00008b0c, 0x00008b0c, 0x00008b0c },
+    { 0x00009ac0, 0x0000af8c, 0x0000af8c, 0x00008b80, 0x00008b80, 0x00008b80 },
+    { 0x00009ac4, 0x0000af90, 0x0000af90, 0x00008b84, 0x00008b84, 0x00008b84 },
+    { 0x00009ac8, 0x0000af94, 0x0000af94, 0x00008b88, 0x00008b88, 0x00008b88 },
+    { 0x00009acc, 0x0000b380, 0x0000b380, 0x00008b8c, 0x00008b8c, 0x00008b8c },
+    { 0x00009ad0, 0x0000b384, 0x0000b384, 0x00008b90, 0x00008b90, 0x00008b90 },
+    { 0x00009ad4, 0x0000b388, 0x0000b388, 0x00008f80, 0x00008f80, 0x00008f80 },
+    { 0x00009ad8, 0x0000b38c, 0x0000b38c, 0x00008f84, 0x00008f84, 0x00008f84 },
+    { 0x00009adc, 0x0000b390, 0x0000b390, 0x00008f88, 0x00008f88, 0x00008f88 },
+    { 0x00009ae0, 0x0000b394, 0x0000b394, 0x00008f8c, 0x00008f8c, 0x00008f8c },
+    { 0x00009ae4, 0x0000b398, 0x0000b398, 0x00008f90, 0x00008f90, 0x00008f90 },
+    { 0x00009ae8, 0x0000b780, 0x0000b780, 0x0000930c, 0x0000930c, 0x0000930c },
+    { 0x00009aec, 0x0000b784, 0x0000b784, 0x00009310, 0x00009310, 0x00009310 },
+    { 0x00009af0, 0x0000b788, 0x0000b788, 0x00009384, 0x00009384, 0x00009384 },
+    { 0x00009af4, 0x0000b78c, 0x0000b78c, 0x00009388, 0x00009388, 0x00009388 },
+    { 0x00009af8, 0x0000b790, 0x0000b790, 0x00009324, 0x00009324, 0x00009324 },
+    { 0x00009afc, 0x0000b794, 0x0000b794, 0x00009704, 0x00009704, 0x00009704 },
+    { 0x00009b00, 0x0000b798, 0x0000b798, 0x000096a4, 0x000096a4, 0x000096a4 },
+    { 0x00009b04, 0x0000d784, 0x0000d784, 0x000096a8, 0x000096a8, 0x000096a8 },
+    { 0x00009b08, 0x0000d788, 0x0000d788, 0x00009710, 0x00009710, 0x00009710 },
+    { 0x00009b0c, 0x0000d78c, 0x0000d78c, 0x00009714, 0x00009714, 0x00009714 },
+    { 0x00009b10, 0x0000d790, 0x0000d790, 0x00009720, 0x00009720, 0x00009720 },
+    { 0x00009b14, 0x0000f780, 0x0000f780, 0x00009724, 0x00009724, 0x00009724 },
+    { 0x00009b18, 0x0000f784, 0x0000f784, 0x00009728, 0x00009728, 0x00009728 },
+    { 0x00009b1c, 0x0000f788, 0x0000f788, 0x0000972c, 0x0000972c, 0x0000972c },
+    { 0x00009b20, 0x0000f78c, 0x0000f78c, 0x000097a0, 0x000097a0, 0x000097a0 },
+    { 0x00009b24, 0x0000f790, 0x0000f790, 0x000097a4, 0x000097a4, 0x000097a4 },
+    { 0x00009b28, 0x0000f794, 0x0000f794, 0x000097a8, 0x000097a8, 0x000097a8 },
+    { 0x00009b2c, 0x0000f7a4, 0x0000f7a4, 0x000097b0, 0x000097b0, 0x000097b0 },
+    { 0x00009b30, 0x0000f7a8, 0x0000f7a8, 0x000097b4, 0x000097b4, 0x000097b4 },
+    { 0x00009b34, 0x0000f7ac, 0x0000f7ac, 0x000097b8, 0x000097b8, 0x000097b8 },
+    { 0x00009b38, 0x0000f7b0, 0x0000f7b0, 0x000097a5, 0x000097a5, 0x000097a5 },
+    { 0x00009b3c, 0x0000f7b4, 0x0000f7b4, 0x000097a9, 0x000097a9, 0x000097a9 },
+    { 0x00009b40, 0x0000f7a1, 0x0000f7a1, 0x000097ad, 0x000097ad, 0x000097ad },
+    { 0x00009b44, 0x0000f7a5, 0x0000f7a5, 0x000097b1, 0x000097b1, 0x000097b1 },
+    { 0x00009b48, 0x0000f7a9, 0x0000f7a9, 0x000097b5, 0x000097b5, 0x000097b5 },
+    { 0x00009b4c, 0x0000f7ad, 0x0000f7ad, 0x000097b9, 0x000097b9, 0x000097b9 },
+    { 0x00009b50, 0x0000f7b1, 0x0000f7b1, 0x000097c5, 0x000097c5, 0x000097c5 },
+    { 0x00009b54, 0x0000f7b5, 0x0000f7b5, 0x000097c9, 0x000097c9, 0x000097c9 },
+    { 0x00009b58, 0x0000f7c5, 0x0000f7c5, 0x000097d1, 0x000097d1, 0x000097d1 },
+    { 0x00009b5c, 0x0000f7c9, 0x0000f7c9, 0x000097d5, 0x000097d5, 0x000097d5 },
+    { 0x00009b60, 0x0000f7cd, 0x0000f7cd, 0x000097d9, 0x000097d9, 0x000097d9 },
+    { 0x00009b64, 0x0000f7d1, 0x0000f7d1, 0x000097c6, 0x000097c6, 0x000097c6 },
+    { 0x00009b68, 0x0000f7d5, 0x0000f7d5, 0x000097ca, 0x000097ca, 0x000097ca },
+    { 0x00009b6c, 0x0000f7c2, 0x0000f7c2, 0x000097ce, 0x000097ce, 0x000097ce },
+    { 0x00009b70, 0x0000f7c6, 0x0000f7c6, 0x000097d2, 0x000097d2, 0x000097d2 },
+    { 0x00009b74, 0x0000f7ca, 0x0000f7ca, 0x000097d6, 0x000097d6, 0x000097d6 },
+    { 0x00009b78, 0x0000f7ce, 0x0000f7ce, 0x000097c3, 0x000097c3, 0x000097c3 },
+    { 0x00009b7c, 0x0000f7d2, 0x0000f7d2, 0x000097c7, 0x000097c7, 0x000097c7 },
+    { 0x00009b80, 0x0000f7d6, 0x0000f7d6, 0x000097cb, 0x000097cb, 0x000097cb },
+    { 0x00009b84, 0x0000f7c3, 0x0000f7c3, 0x000097cf, 0x000097cf, 0x000097cf },
+    { 0x00009b88, 0x0000f7c7, 0x0000f7c7, 0x000097d7, 0x000097d7, 0x000097d7 },
+    { 0x00009b8c, 0x0000f7cb, 0x0000f7cb, 0x000097db, 0x000097db, 0x000097db },
+    { 0x00009b90, 0x0000f7d3, 0x0000f7d3, 0x000097db, 0x000097db, 0x000097db },
+    { 0x00009b94, 0x0000f7d7, 0x0000f7d7, 0x000097db, 0x000097db, 0x000097db },
+    { 0x00009b98, 0x0000f7db, 0x0000f7db, 0x000097db, 0x000097db, 0x000097db },
+    { 0x00009b9c, 0x0000f7db, 0x0000f7db, 0x000097db, 0x000097db, 0x000097db },
+    { 0x00009ba0, 0x0000f7db, 0x0000f7db, 0x000097db, 0x000097db, 0x000097db },
+    { 0x00009ba4, 0x0000f7db, 0x0000f7db, 0x000097db, 0x000097db, 0x000097db },
+    { 0x00009ba8, 0x0000f7db, 0x0000f7db, 0x000097db, 0x000097db, 0x000097db },
+    { 0x00009bac, 0x0000f7db, 0x0000f7db, 0x000097db, 0x000097db, 0x000097db },
+    { 0x00009bb0, 0x0000f7db, 0x0000f7db, 0x000097db, 0x000097db, 0x000097db },
+    { 0x00009bb4, 0x0000f7db, 0x0000f7db, 0x000097db, 0x000097db, 0x000097db },
+    { 0x00009bb8, 0x0000f7db, 0x0000f7db, 0x000097db, 0x000097db, 0x000097db },
+    { 0x00009bbc, 0x0000f7db, 0x0000f7db, 0x000097db, 0x000097db, 0x000097db },
+    { 0x00009bc0, 0x0000f7db, 0x0000f7db, 0x000097db, 0x000097db, 0x000097db },
+    { 0x00009bc4, 0x0000f7db, 0x0000f7db, 0x000097db, 0x000097db, 0x000097db },
+    { 0x00009bc8, 0x0000f7db, 0x0000f7db, 0x000097db, 0x000097db, 0x000097db },
+    { 0x00009bcc, 0x0000f7db, 0x0000f7db, 0x000097db, 0x000097db, 0x000097db },
+    { 0x00009bd0, 0x0000f7db, 0x0000f7db, 0x000097db, 0x000097db, 0x000097db },
+    { 0x00009bd4, 0x0000f7db, 0x0000f7db, 0x000097db, 0x000097db, 0x000097db },
+    { 0x00009bd8, 0x0000f7db, 0x0000f7db, 0x000097db, 0x000097db, 0x000097db },
+    { 0x00009bdc, 0x0000f7db, 0x0000f7db, 0x000097db, 0x000097db, 0x000097db },
+    { 0x00009be0, 0x0000f7db, 0x0000f7db, 0x000097db, 0x000097db, 0x000097db },
+    { 0x00009be4, 0x0000f7db, 0x0000f7db, 0x000097db, 0x000097db, 0x000097db },
+    { 0x00009be8, 0x0000f7db, 0x0000f7db, 0x000097db, 0x000097db, 0x000097db },
+    { 0x00009bec, 0x0000f7db, 0x0000f7db, 0x000097db, 0x000097db, 0x000097db },
+    { 0x00009bf0, 0x0000f7db, 0x0000f7db, 0x000097db, 0x000097db, 0x000097db },
+    { 0x00009bf4, 0x0000f7db, 0x0000f7db, 0x000097db, 0x000097db, 0x000097db },
+    { 0x00009bf8, 0x0000f7db, 0x0000f7db, 0x000097db, 0x000097db, 0x000097db },
+    { 0x00009bfc, 0x0000f7db, 0x0000f7db, 0x000097db, 0x000097db, 0x000097db },
+    { 0x0000a204, 0x00000444, 0x00000444, 0x00000444, 0x00000444, 0x00000444 },
+    { 0x0000a208, 0x803e4788, 0x803e4788, 0x803e4788, 0x803e4788, 0x803e4788 },
+    { 0x0000a20c, 0x000c6019, 0x000c6019, 0x000c6019, 0x000c6019, 0x000c6019 },
+    { 0x0000b20c, 0x000c6019, 0x000c6019, 0x000c6019, 0x000c6019, 0x000c6019 },
+    { 0x0000a21c, 0x1883800a, 0x1883800a, 0x1883800a, 0x1883800a, 0x1883800a },
+    { 0x0000a230, 0x00000000, 0x00000000, 0x00000210, 0x00000108, 0x00000000 },
+    { 0x0000a274, 0x0a19c652, 0x0a19c652, 0x0a1aa652, 0x0a1aa652, 0x0a1aa652 },
+    { 0x0000a300, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 },
+    { 0x0000a304, 0x00003002, 0x00003002, 0x00003002, 0x00003002, 0x00003002 },
+    { 0x0000a308, 0x00006004, 0x00006004, 0x00008009, 0x00008009, 0x00008009 },
+    { 0x0000a30c, 0x0000a006, 0x0000a006, 0x0000b00b, 0x0000b00b, 0x0000b00b },
+    { 0x0000a310, 0x0000e012, 0x0000e012, 0x0000e012, 0x0000e012, 0x0000e012 },
+    { 0x0000a314, 0x00011014, 0x00011014, 0x00012048, 0x00012048, 0x00012048 },
+    { 0x0000a318, 0x0001504a, 0x0001504a, 0x0001604a, 0x0001604a, 0x0001604a },
+    { 0x0000a31c, 0x0001904c, 0x0001904c, 0x0001a211, 0x0001a211, 0x0001a211 },
+    { 0x0000a320, 0x0001c04e, 0x0001c04e, 0x0001e213, 0x0001e213, 0x0001e213 },
+    { 0x0000a324, 0x00020092, 0x00020092, 0x0002121b, 0x0002121b, 0x0002121b },
+    { 0x0000a328, 0x0002410a, 0x0002410a, 0x00024412, 0x00024412, 0x00024412 },
+    { 0x0000a32c, 0x0002710c, 0x0002710c, 0x00028414, 0x00028414, 0x00028414 },
+    { 0x0000a330, 0x0002b18b, 0x0002b18b, 0x0002b44a, 0x0002b44a, 0x0002b44a },
+    { 0x0000a334, 0x0002e1cc, 0x0002e1cc, 0x00030649, 0x00030649, 0x00030649 },
+    { 0x0000a338, 0x000321ec, 0x000321ec, 0x0003364b, 0x0003364b, 0x0003364b },
+    { 0x0000a33c, 0x000321ec, 0x000321ec, 0x00038a49, 0x00038a49, 0x00038a49 },
+    { 0x0000a340, 0x000321ec, 0x000321ec, 0x0003be48, 0x0003be48, 0x0003be48 },
+    { 0x0000a344, 0x000321ec, 0x000321ec, 0x0003ee4a, 0x0003ee4a, 0x0003ee4a },
+    { 0x0000a348, 0x000321ec, 0x000321ec, 0x00042e88, 0x00042e88, 0x00042e88 },
+    { 0x0000a34c, 0x000321ec, 0x000321ec, 0x00046e8a, 0x00046e8a, 0x00046e8a },
+    { 0x0000a350, 0x000321ec, 0x000321ec, 0x00049ec9, 0x00049ec9, 0x00049ec9 },
+    { 0x0000a354, 0x000321ec, 0x000321ec, 0x0004bf42, 0x0004bf42, 0x0004bf42 },
+    { 0x0000784c, 0x0e4f048c, 0x0e4f048c, 0x0e4d048c, 0x0e4d048c, 0x0e4d048c },
+    { 0x00007854, 0x12031828, 0x12031828, 0x12035828, 0x12035828, 0x12035828 },
+    { 0x00007870, 0x807ec400, 0x807ec400, 0x807ec000, 0x807ec000, 0x807ec000 },
+    { 0x0000788c, 0x00010000, 0x00010000, 0x00110000, 0x00110000, 0x00110000 },
+};
+
+static const u32 ar9280Common_9280[][2] = {
+    { 0x0000000c, 0x00000000 },
+    { 0x00000030, 0x00020015 },
+    { 0x00000034, 0x00000005 },
+    { 0x00000040, 0x00000000 },
+    { 0x00000044, 0x00000008 },
+    { 0x00000048, 0x00000008 },
+    { 0x0000004c, 0x00000010 },
+    { 0x00000050, 0x00000000 },
+    { 0x00000054, 0x0000001f },
+    { 0x00000800, 0x00000000 },
+    { 0x00000804, 0x00000000 },
+    { 0x00000808, 0x00000000 },
+    { 0x0000080c, 0x00000000 },
+    { 0x00000810, 0x00000000 },
+    { 0x00000814, 0x00000000 },
+    { 0x00000818, 0x00000000 },
+    { 0x0000081c, 0x00000000 },
+    { 0x00000820, 0x00000000 },
+    { 0x00000824, 0x00000000 },
+    { 0x00001040, 0x002ffc0f },
+    { 0x00001044, 0x002ffc0f },
+    { 0x00001048, 0x002ffc0f },
+    { 0x0000104c, 0x002ffc0f },
+    { 0x00001050, 0x002ffc0f },
+    { 0x00001054, 0x002ffc0f },
+    { 0x00001058, 0x002ffc0f },
+    { 0x0000105c, 0x002ffc0f },
+    { 0x00001060, 0x002ffc0f },
+    { 0x00001064, 0x002ffc0f },
+    { 0x00001230, 0x00000000 },
+    { 0x00001270, 0x00000000 },
+    { 0x00001038, 0x00000000 },
+    { 0x00001078, 0x00000000 },
+    { 0x000010b8, 0x00000000 },
+    { 0x000010f8, 0x00000000 },
+    { 0x00001138, 0x00000000 },
+    { 0x00001178, 0x00000000 },
+    { 0x000011b8, 0x00000000 },
+    { 0x000011f8, 0x00000000 },
+    { 0x00001238, 0x00000000 },
+    { 0x00001278, 0x00000000 },
+    { 0x000012b8, 0x00000000 },
+    { 0x000012f8, 0x00000000 },
+    { 0x00001338, 0x00000000 },
+    { 0x00001378, 0x00000000 },
+    { 0x000013b8, 0x00000000 },
+    { 0x000013f8, 0x00000000 },
+    { 0x00001438, 0x00000000 },
+    { 0x00001478, 0x00000000 },
+    { 0x000014b8, 0x00000000 },
+    { 0x000014f8, 0x00000000 },
+    { 0x00001538, 0x00000000 },
+    { 0x00001578, 0x00000000 },
+    { 0x000015b8, 0x00000000 },
+    { 0x000015f8, 0x00000000 },
+    { 0x00001638, 0x00000000 },
+    { 0x00001678, 0x00000000 },
+    { 0x000016b8, 0x00000000 },
+    { 0x000016f8, 0x00000000 },
+    { 0x00001738, 0x00000000 },
+    { 0x00001778, 0x00000000 },
+    { 0x000017b8, 0x00000000 },
+    { 0x000017f8, 0x00000000 },
+    { 0x0000103c, 0x00000000 },
+    { 0x0000107c, 0x00000000 },
+    { 0x000010bc, 0x00000000 },
+    { 0x000010fc, 0x00000000 },
+    { 0x0000113c, 0x00000000 },
+    { 0x0000117c, 0x00000000 },
+    { 0x000011bc, 0x00000000 },
+    { 0x000011fc, 0x00000000 },
+    { 0x0000123c, 0x00000000 },
+    { 0x0000127c, 0x00000000 },
+    { 0x000012bc, 0x00000000 },
+    { 0x000012fc, 0x00000000 },
+    { 0x0000133c, 0x00000000 },
+    { 0x0000137c, 0x00000000 },
+    { 0x000013bc, 0x00000000 },
+    { 0x000013fc, 0x00000000 },
+    { 0x0000143c, 0x00000000 },
+    { 0x0000147c, 0x00000000 },
+    { 0x00004030, 0x00000002 },
+    { 0x0000403c, 0x00000002 },
+    { 0x00004024, 0x0000001f },
+    { 0x00007010, 0x00000033 },
+    { 0x00007038, 0x000004c2 },
+    { 0x00008004, 0x00000000 },
+    { 0x00008008, 0x00000000 },
+    { 0x0000800c, 0x00000000 },
+    { 0x00008018, 0x00000700 },
+    { 0x00008020, 0x00000000 },
+    { 0x00008038, 0x00000000 },
+    { 0x0000803c, 0x00000000 },
+    { 0x00008048, 0x40000000 },
+    { 0x00008054, 0x00000000 },
+    { 0x00008058, 0x00000000 },
+    { 0x0000805c, 0x000fc78f },
+    { 0x00008060, 0x0000000f },
+    { 0x00008064, 0x00000000 },
+    { 0x00008070, 0x00000000 },
+    { 0x000080c0, 0x2a82301a },
+    { 0x000080c4, 0x05dc01e0 },
+    { 0x000080c8, 0x1f402710 },
+    { 0x000080cc, 0x01f40000 },
+    { 0x000080d0, 0x00001e00 },
+    { 0x000080d4, 0x00000000 },
+    { 0x000080d8, 0x00400000 },
+    { 0x000080e0, 0xffffffff },
+    { 0x000080e4, 0x0000ffff },
+    { 0x000080e8, 0x003f3f3f },
+    { 0x000080ec, 0x00000000 },
+    { 0x000080f0, 0x00000000 },
+    { 0x000080f4, 0x00000000 },
+    { 0x000080f8, 0x00000000 },
+    { 0x000080fc, 0x00020000 },
+    { 0x00008100, 0x00020000 },
+    { 0x00008104, 0x00000001 },
+    { 0x00008108, 0x00000052 },
+    { 0x0000810c, 0x00000000 },
+    { 0x00008110, 0x00000168 },
+    { 0x00008118, 0x000100aa },
+    { 0x0000811c, 0x00003210 },
+    { 0x00008120, 0x08f04800 },
+    { 0x00008124, 0x00000000 },
+    { 0x00008128, 0x00000000 },
+    { 0x0000812c, 0x00000000 },
+    { 0x00008130, 0x00000000 },
+    { 0x00008134, 0x00000000 },
+    { 0x00008138, 0x00000000 },
+    { 0x0000813c, 0x00000000 },
+    { 0x00008144, 0x00000000 },
+    { 0x00008168, 0x00000000 },
+    { 0x0000816c, 0x00000000 },
+    { 0x00008170, 0x32143320 },
+    { 0x00008174, 0xfaa4fa50 },
+    { 0x00008178, 0x00000100 },
+    { 0x0000817c, 0x00000000 },
+    { 0x000081c4, 0x00000000 },
+    { 0x000081d0, 0x00003210 },
+    { 0x000081ec, 0x00000000 },
+    { 0x000081f0, 0x00000000 },
+    { 0x000081f4, 0x00000000 },
+    { 0x000081f8, 0x00000000 },
+    { 0x000081fc, 0x00000000 },
+    { 0x00008200, 0x00000000 },
+    { 0x00008204, 0x00000000 },
+    { 0x00008208, 0x00000000 },
+    { 0x0000820c, 0x00000000 },
+    { 0x00008210, 0x00000000 },
+    { 0x00008214, 0x00000000 },
+    { 0x00008218, 0x00000000 },
+    { 0x0000821c, 0x00000000 },
+    { 0x00008220, 0x00000000 },
+    { 0x00008224, 0x00000000 },
+    { 0x00008228, 0x00000000 },
+    { 0x0000822c, 0x00000000 },
+    { 0x00008230, 0x00000000 },
+    { 0x00008234, 0x00000000 },
+    { 0x00008238, 0x00000000 },
+    { 0x0000823c, 0x00000000 },
+    { 0x00008240, 0x00100000 },
+    { 0x00008244, 0x0010f400 },
+    { 0x00008248, 0x00000100 },
+    { 0x0000824c, 0x0001e800 },
+    { 0x00008250, 0x00000000 },
+    { 0x00008254, 0x00000000 },
+    { 0x00008258, 0x00000000 },
+    { 0x0000825c, 0x400000ff },
+    { 0x00008260, 0x00080922 },
+    { 0x00008270, 0x00000000 },
+    { 0x00008274, 0x40000000 },
+    { 0x00008278, 0x003e4180 },
+    { 0x0000827c, 0x00000000 },
+    { 0x00008284, 0x0000002c },
+    { 0x00008288, 0x0000002c },
+    { 0x0000828c, 0x00000000 },
+    { 0x00008294, 0x00000000 },
+    { 0x00008298, 0x00000000 },
+    { 0x00008300, 0x00000000 },
+    { 0x00008304, 0x00000000 },
+    { 0x00008308, 0x00000000 },
+    { 0x0000830c, 0x00000000 },
+    { 0x00008310, 0x00000000 },
+    { 0x00008314, 0x00000000 },
+    { 0x00008318, 0x00000000 },
+    { 0x00008328, 0x00000000 },
+    { 0x0000832c, 0x00000007 },
+    { 0x00008330, 0x00000302 },
+    { 0x00008334, 0x00000e00 },
+    { 0x00008338, 0x00000000 },
+    { 0x0000833c, 0x00000000 },
+    { 0x00008340, 0x000107ff },
+    { 0x00008344, 0x00000000 },
+    { 0x00009808, 0x00000000 },
+    { 0x0000980c, 0xaf268e30 },
+    { 0x00009810, 0xfd14e000 },
+    { 0x00009814, 0x9c0a9f6b },
+    { 0x0000981c, 0x00000000 },
+    { 0x0000982c, 0x0000a000 },
+    { 0x00009830, 0x00000000 },
+    { 0x0000983c, 0x00200400 },
+    { 0x00009840, 0x206a01ae },
+    { 0x0000984c, 0x0040233c },
+    { 0x0000a84c, 0x0040233c },
+    { 0x00009854, 0x00000044 },
+    { 0x00009900, 0x00000000 },
+    { 0x00009904, 0x00000000 },
+    { 0x00009908, 0x00000000 },
+    { 0x0000990c, 0x00000000 },
+    { 0x0000991c, 0x10000fff },
+    { 0x00009920, 0x04900000 },
+    { 0x0000a920, 0x04900000 },
+    { 0x00009928, 0x00000001 },
+    { 0x0000992c, 0x00000004 },
+    { 0x00009934, 0x1e1f2022 },
+    { 0x00009938, 0x0a0b0c0d },
+    { 0x0000993c, 0x00000000 },
+    { 0x00009948, 0x9280c00a },
+    { 0x0000994c, 0x00020028 },
+    { 0x00009954, 0xe250a51e },
+    { 0x00009958, 0x3388ffff },
+    { 0x00009940, 0x00781204 },
+    { 0x0000c95c, 0x004b6a8e },
+    { 0x0000c968, 0x000003ce },
+    { 0x00009970, 0x190fb514 },
+    { 0x00009974, 0x00000000 },
+    { 0x00009978, 0x00000001 },
+    { 0x0000997c, 0x00000000 },
+    { 0x00009980, 0x00000000 },
+    { 0x00009984, 0x00000000 },
+    { 0x00009988, 0x00000000 },
+    { 0x0000998c, 0x00000000 },
+    { 0x00009990, 0x00000000 },
+    { 0x00009994, 0x00000000 },
+    { 0x00009998, 0x00000000 },
+    { 0x0000999c, 0x00000000 },
+    { 0x000099a0, 0x00000000 },
+    { 0x000099a4, 0x00000001 },
+    { 0x000099a8, 0x201fff00 },
+    { 0x000099ac, 0x006f00c4 },
+    { 0x000099b0, 0x03051000 },
+    { 0x000099b4, 0x00000820 },
+    { 0x000099dc, 0x00000000 },
+    { 0x000099e0, 0x00000000 },
+    { 0x000099e4, 0xaaaaaaaa },
+    { 0x000099e8, 0x3c466478 },
+    { 0x000099ec, 0x0cc80caa },
+    { 0x000099fc, 0x00001042 },
+    { 0x0000a210, 0x4080a333 },
+    { 0x0000a214, 0x40206c10 },
+    { 0x0000a218, 0x009c4060 },
+    { 0x0000a220, 0x01834061 },
+    { 0x0000a224, 0x00000400 },
+    { 0x0000a228, 0x000003b5 },
+    { 0x0000a22c, 0x23277200 },
+    { 0x0000a234, 0x20202020 },
+    { 0x0000a238, 0x20202020 },
+    { 0x0000a23c, 0x13c889af },
+    { 0x0000a240, 0x38490a20 },
+    { 0x0000a244, 0x00007bb6 },
+    { 0x0000a248, 0x0fff3ffc },
+    { 0x0000a24c, 0x00000001 },
+    { 0x0000a250, 0x001da000 },
+    { 0x0000a254, 0x00000000 },
+    { 0x0000a258, 0x0cdbd380 },
+    { 0x0000a25c, 0x0f0f0f01 },
+    { 0x0000a260, 0xdfa91f01 },
+    { 0x0000a268, 0x00000000 },
+    { 0x0000a26c, 0x0ebae9c6 },
+    { 0x0000b26c, 0x0ebae9c6 },
+    { 0x0000d270, 0x00820820 },
+    { 0x0000a278, 0x1ce739ce },
+    { 0x0000a27c, 0x050701ce },
+    { 0x0000a358, 0x7999aa0f },
+    { 0x0000d35c, 0x07ffffef },
+    { 0x0000d360, 0x0fffffe7 },
+    { 0x0000d364, 0x17ffffe5 },
+    { 0x0000d368, 0x1fffffe4 },
+    { 0x0000d36c, 0x37ffffe3 },
+    { 0x0000d370, 0x3fffffe3 },
+    { 0x0000d374, 0x57ffffe3 },
+    { 0x0000d378, 0x5fffffe2 },
+    { 0x0000d37c, 0x7fffffe2 },
+    { 0x0000d380, 0x7f3c7bba },
+    { 0x0000d384, 0xf3307ff0 },
+    { 0x0000a388, 0x0c000000 },
+    { 0x0000a38c, 0x20202020 },
+    { 0x0000a390, 0x20202020 },
+    { 0x0000a394, 0x1ce739ce },
+    { 0x0000a398, 0x000001ce },
+    { 0x0000a39c, 0x00000001 },
+    { 0x0000a3a0, 0x00000000 },
+    { 0x0000a3a4, 0x00000000 },
+    { 0x0000a3a8, 0x00000000 },
+    { 0x0000a3ac, 0x00000000 },
+    { 0x0000a3b0, 0x00000000 },
+    { 0x0000a3b4, 0x00000000 },
+    { 0x0000a3b8, 0x00000000 },
+    { 0x0000a3bc, 0x00000000 },
+    { 0x0000a3c0, 0x00000000 },
+    { 0x0000a3c4, 0x00000000 },
+    { 0x0000a3c8, 0x00000246 },
+    { 0x0000a3cc, 0x20202020 },
+    { 0x0000a3d0, 0x20202020 },
+    { 0x0000a3d4, 0x20202020 },
+    { 0x0000a3dc, 0x1ce739ce },
+    { 0x0000a3e0, 0x000001ce },
+    { 0x0000a3e4, 0x00000000 },
+    { 0x0000a3e8, 0x18c43433 },
+    { 0x0000a3ec, 0x00f38081 },
+    { 0x00007800, 0x00040000 },
+    { 0x00007804, 0xdb005012 },
+    { 0x00007808, 0x04924914 },
+    { 0x0000780c, 0x21084210 },
+    { 0x00007810, 0x6d801300 },
+    { 0x00007814, 0x0019beff },
+    { 0x00007818, 0x07e40000 },
+    { 0x0000781c, 0x00492000 },
+    { 0x00007820, 0x92492480 },
+    { 0x00007824, 0x00040000 },
+    { 0x00007828, 0xdb005012 },
+    { 0x0000782c, 0x04924914 },
+    { 0x00007830, 0x21084210 },
+    { 0x00007834, 0x6d801300 },
+    { 0x00007838, 0x0019beff },
+    { 0x0000783c, 0x07e40000 },
+    { 0x00007840, 0x00492000 },
+    { 0x00007844, 0x92492480 },
+    { 0x00007848, 0x00120000 },
+    { 0x00007850, 0x54214514 },
+    { 0x00007858, 0x92592692 },
+    { 0x00007860, 0x52802000 },
+    { 0x00007864, 0x0a8e370e },
+    { 0x00007868, 0xc0102850 },
+    { 0x0000786c, 0x812d4000 },
+    { 0x00007874, 0x001b6db0 },
+    { 0x00007878, 0x00376b63 },
+    { 0x0000787c, 0x06db6db6 },
+    { 0x00007880, 0x006d8000 },
+    { 0x00007884, 0xffeffffe },
+    { 0x00007888, 0xffeffffe },
+    { 0x00007890, 0x00060aeb },
+    { 0x00007894, 0x5a108000 },
+    { 0x00007898, 0x2a850160 },
+};
+
+
+
+
+static const u32 ar9280Modes_9280_2[][6] = {
+    { 0x00001030, 0x00000230, 0x00000460, 0x000002c0, 0x00000160, 0x000001e0 },
+    { 0x00001070, 0x00000168, 0x000002d0, 0x00000318, 0x0000018c, 0x000001e0 },
+    { 0x000010b0, 0x00000e60, 0x00001cc0, 0x00007c70, 0x00003e38, 0x00001180 },
+    { 0x000010f0, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000008 },
+    { 0x00008014, 0x03e803e8, 0x07d007d0, 0x10801600, 0x08400b00, 0x06e006e0 },
+    { 0x0000801c, 0x128d8027, 0x128d804f, 0x12e00057, 0x12e0002b, 0x0988004f },
+    { 0x00008318, 0x00003e80, 0x00007d00, 0x00006880, 0x00003440, 0x00006880 },
+    { 0x00009804, 0x00000300, 0x000003c4, 0x000003c4, 0x00000300, 0x00000303 },
+    { 0x00009820, 0x02020200, 0x02020200, 0x02020200, 0x02020200, 0x02020200 },
+    { 0x00009824, 0x00000e0e, 0x00000e0e, 0x00000e0e, 0x00000e0e, 0x00000e0e },
+    { 0x00009828, 0x0a020001, 0x0a020001, 0x0a020001, 0x0a020001, 0x0a020001 },
+    { 0x00009834, 0x00000e0e, 0x00000e0e, 0x00000e0e, 0x00000e0e, 0x00000e0e },
+    { 0x00009838, 0x00000007, 0x00000007, 0x00000007, 0x00000007, 0x00000007 },
+    { 0x00009840, 0x206a012e, 0x206a012e, 0x206a022e, 0x206a022e, 0x206a022e },
+    { 0x00009844, 0x0372161e, 0x0372161e, 0x037216a0, 0x037216a0, 0x037216a0 },
+    { 0x00009848, 0x00001066, 0x00001066, 0x00001063, 0x00001063, 0x00001063 },
+    { 0x0000a848, 0x00001066, 0x00001066, 0x00001063, 0x00001063, 0x00001063 },
+    { 0x00009850, 0x6d4000e2, 0x6d4000e2, 0x6d4000e2, 0x6d4000e2, 0x6d4000e2 },
+    { 0x00009858, 0x7ec84d2e, 0x7ec84d2e, 0x7ec88d2e, 0x7ec88d2e, 0x7ec88d2e },
+    { 0x0000985c, 0x3139605e, 0x3139605e, 0x3139605e, 0x3139605e, 0x3139605e },
+    { 0x00009860, 0x00048d18, 0x00048d18, 0x00048d20, 0x00048d20, 0x00048d18 },
+    { 0x0000c864, 0x0000fe00, 0x0000fe00, 0x0001ce00, 0x0001ce00, 0x0001ce00 },
+    { 0x00009868, 0x5ac640d0, 0x5ac640d0, 0x5ac640d0, 0x5ac640d0, 0x5ac640d0 },
+    { 0x0000986c, 0x06903081, 0x06903081, 0x06903881, 0x06903881, 0x06903881 },
+    { 0x00009914, 0x000007d0, 0x000007d0, 0x00000898, 0x00000898, 0x000007d0 },
+    { 0x00009918, 0x0000000a, 0x00000014, 0x00000016, 0x0000000b, 0x00000016 },
+    { 0x00009924, 0xd00a8a07, 0xd00a8a07, 0xd00a8a0d, 0xd00a8a0d, 0xd00a8a0d },
+    { 0x00009944, 0xdfbc1010, 0xdfbc1010, 0xdfbc1010, 0xdfbc1010, 0xdfbc1010 },
+    { 0x00009960, 0x00000010, 0x00000010, 0x00000010, 0x00000010, 0x00000010 },
+    { 0x0000a960, 0x00000010, 0x00000010, 0x00000010, 0x00000010, 0x00000010 },
+    { 0x00009964, 0x00000210, 0x00000210, 0x00000210, 0x00000210, 0x00000210 },
+    { 0x0000c9b8, 0x0000000f, 0x0000000f, 0x0000001c, 0x0000001c, 0x0000001c },
+    { 0x0000c9bc, 0x00000600, 0x00000600, 0x00000c00, 0x00000c00, 0x00000c00 },
+    { 0x000099c0, 0x05eea6d4, 0x05eea6d4, 0x05eea6d4, 0x05eea6d4, 0x05eea6d4 },
+    { 0x000099c4, 0x06336f77, 0x06336f77, 0x06336f77, 0x06336f77, 0x06336f77 },
+    { 0x000099c8, 0x60f65329, 0x60f65329, 0x60f65329, 0x60f65329, 0x60f65329 },
+    { 0x000099cc, 0x08f186c8, 0x08f186c8, 0x08f186c8, 0x08f186c8, 0x08f186c8 },
+    { 0x000099d0, 0x00046384, 0x00046384, 0x00046384, 0x00046384, 0x00046384 },
+    { 0x000099d4, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 },
+    { 0x000099d8, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 },
+    { 0x00009a00, 0x00008184, 0x00008184, 0x00000290, 0x00000290, 0x00000290 },
+    { 0x00009a04, 0x00008188, 0x00008188, 0x00000300, 0x00000300, 0x00000300 },
+    { 0x00009a08, 0x0000818c, 0x0000818c, 0x00000304, 0x00000304, 0x00000304 },
+    { 0x00009a0c, 0x00008190, 0x00008190, 0x00000308, 0x00000308, 0x00000308 },
+    { 0x00009a10, 0x00008194, 0x00008194, 0x0000030c, 0x0000030c, 0x0000030c },
+    { 0x00009a14, 0x00008200, 0x00008200, 0x00008000, 0x00008000, 0x00008000 },
+    { 0x00009a18, 0x00008204, 0x00008204, 0x00008004, 0x00008004, 0x00008004 },
+    { 0x00009a1c, 0x00008208, 0x00008208, 0x00008008, 0x00008008, 0x00008008 },
+    { 0x00009a20, 0x0000820c, 0x0000820c, 0x0000800c, 0x0000800c, 0x0000800c },
+    { 0x00009a24, 0x00008210, 0x00008210, 0x00008080, 0x00008080, 0x00008080 },
+    { 0x00009a28, 0x00008214, 0x00008214, 0x00008084, 0x00008084, 0x00008084 },
+    { 0x00009a2c, 0x00008280, 0x00008280, 0x00008088, 0x00008088, 0x00008088 },
+    { 0x00009a30, 0x00008284, 0x00008284, 0x0000808c, 0x0000808c, 0x0000808c },
+    { 0x00009a34, 0x00008288, 0x00008288, 0x00008100, 0x00008100, 0x00008100 },
+    { 0x00009a38, 0x0000828c, 0x0000828c, 0x00008104, 0x00008104, 0x00008104 },
+    { 0x00009a3c, 0x00008290, 0x00008290, 0x00008108, 0x00008108, 0x00008108 },
+    { 0x00009a40, 0x00008300, 0x00008300, 0x0000810c, 0x0000810c, 0x0000810c },
+    { 0x00009a44, 0x00008304, 0x00008304, 0x00008110, 0x00008110, 0x00008110 },
+    { 0x00009a48, 0x00008308, 0x00008308, 0x00008114, 0x00008114, 0x00008114 },
+    { 0x00009a4c, 0x0000830c, 0x0000830c, 0x00008180, 0x00008180, 0x00008180 },
+    { 0x00009a50, 0x00008310, 0x00008310, 0x00008184, 0x00008184, 0x00008184 },
+    { 0x00009a54, 0x00008314, 0x00008314, 0x00008188, 0x00008188, 0x00008188 },
+    { 0x00009a58, 0x00008380, 0x00008380, 0x0000818c, 0x0000818c, 0x0000818c },
+    { 0x00009a5c, 0x00008384, 0x00008384, 0x00008190, 0x00008190, 0x00008190 },
+    { 0x00009a60, 0x00008388, 0x00008388, 0x00008194, 0x00008194, 0x00008194 },
+    { 0x00009a64, 0x0000838c, 0x0000838c, 0x000081a0, 0x000081a0, 0x000081a0 },
+    { 0x00009a68, 0x00008390, 0x00008390, 0x0000820c, 0x0000820c, 0x0000820c },
+    { 0x00009a6c, 0x00008394, 0x00008394, 0x000081a8, 0x000081a8, 0x000081a8 },
+    { 0x00009a70, 0x0000a380, 0x0000a380, 0x00008284, 0x00008284, 0x00008284 },
+    { 0x00009a74, 0x0000a384, 0x0000a384, 0x00008288, 0x00008288, 0x00008288 },
+    { 0x00009a78, 0x0000a388, 0x0000a388, 0x00008224, 0x00008224, 0x00008224 },
+    { 0x00009a7c, 0x0000a38c, 0x0000a38c, 0x00008290, 0x00008290, 0x00008290 },
+    { 0x00009a80, 0x0000a390, 0x0000a390, 0x00008300, 0x00008300, 0x00008300 },
+    { 0x00009a84, 0x0000a394, 0x0000a394, 0x00008304, 0x00008304, 0x00008304 },
+    { 0x00009a88, 0x0000a780, 0x0000a780, 0x00008308, 0x00008308, 0x00008308 },
+    { 0x00009a8c, 0x0000a784, 0x0000a784, 0x0000830c, 0x0000830c, 0x0000830c },
+    { 0x00009a90, 0x0000a788, 0x0000a788, 0x00008380, 0x00008380, 0x00008380 },
+    { 0x00009a94, 0x0000a78c, 0x0000a78c, 0x00008384, 0x00008384, 0x00008384 },
+    { 0x00009a98, 0x0000a790, 0x0000a790, 0x00008700, 0x00008700, 0x00008700 },
+    { 0x00009a9c, 0x0000a794, 0x0000a794, 0x00008704, 0x00008704, 0x00008704 },
+    { 0x00009aa0, 0x0000ab84, 0x0000ab84, 0x00008708, 0x00008708, 0x00008708 },
+    { 0x00009aa4, 0x0000ab88, 0x0000ab88, 0x0000870c, 0x0000870c, 0x0000870c },
+    { 0x00009aa8, 0x0000ab8c, 0x0000ab8c, 0x00008780, 0x00008780, 0x00008780 },
+    { 0x00009aac, 0x0000ab90, 0x0000ab90, 0x00008784, 0x00008784, 0x00008784 },
+    { 0x00009ab0, 0x0000ab94, 0x0000ab94, 0x00008b00, 0x00008b00, 0x00008b00 },
+    { 0x00009ab4, 0x0000af80, 0x0000af80, 0x00008b04, 0x00008b04, 0x00008b04 },
+    { 0x00009ab8, 0x0000af84, 0x0000af84, 0x00008b08, 0x00008b08, 0x00008b08 },
+    { 0x00009abc, 0x0000af88, 0x0000af88, 0x00008b0c, 0x00008b0c, 0x00008b0c },
+    { 0x00009ac0, 0x0000af8c, 0x0000af8c, 0x00008b80, 0x00008b80, 0x00008b80 },
+    { 0x00009ac4, 0x0000af90, 0x0000af90, 0x00008b84, 0x00008b84, 0x00008b84 },
+    { 0x00009ac8, 0x0000af94, 0x0000af94, 0x00008b88, 0x00008b88, 0x00008b88 },
+    { 0x00009acc, 0x0000b380, 0x0000b380, 0x00008b8c, 0x00008b8c, 0x00008b8c },
+    { 0x00009ad0, 0x0000b384, 0x0000b384, 0x00008b90, 0x00008b90, 0x00008b90 },
+    { 0x00009ad4, 0x0000b388, 0x0000b388, 0x00008f80, 0x00008f80, 0x00008f80 },
+    { 0x00009ad8, 0x0000b38c, 0x0000b38c, 0x00008f84, 0x00008f84, 0x00008f84 },
+    { 0x00009adc, 0x0000b390, 0x0000b390, 0x00008f88, 0x00008f88, 0x00008f88 },
+    { 0x00009ae0, 0x0000b394, 0x0000b394, 0x00008f8c, 0x00008f8c, 0x00008f8c },
+    { 0x00009ae4, 0x0000b398, 0x0000b398, 0x00008f90, 0x00008f90, 0x00008f90 },
+    { 0x00009ae8, 0x0000b780, 0x0000b780, 0x0000930c, 0x0000930c, 0x0000930c },
+    { 0x00009aec, 0x0000b784, 0x0000b784, 0x00009310, 0x00009310, 0x00009310 },
+    { 0x00009af0, 0x0000b788, 0x0000b788, 0x00009384, 0x00009384, 0x00009384 },
+    { 0x00009af4, 0x0000b78c, 0x0000b78c, 0x00009388, 0x00009388, 0x00009388 },
+    { 0x00009af8, 0x0000b790, 0x0000b790, 0x00009324, 0x00009324, 0x00009324 },
+    { 0x00009afc, 0x0000b794, 0x0000b794, 0x00009704, 0x00009704, 0x00009704 },
+    { 0x00009b00, 0x0000b798, 0x0000b798, 0x000096a4, 0x000096a4, 0x000096a4 },
+    { 0x00009b04, 0x0000d784, 0x0000d784, 0x000096a8, 0x000096a8, 0x000096a8 },
+    { 0x00009b08, 0x0000d788, 0x0000d788, 0x00009710, 0x00009710, 0x00009710 },
+    { 0x00009b0c, 0x0000d78c, 0x0000d78c, 0x00009714, 0x00009714, 0x00009714 },
+    { 0x00009b10, 0x0000d790, 0x0000d790, 0x00009720, 0x00009720, 0x00009720 },
+    { 0x00009b14, 0x0000f780, 0x0000f780, 0x00009724, 0x00009724, 0x00009724 },
+    { 0x00009b18, 0x0000f784, 0x0000f784, 0x00009728, 0x00009728, 0x00009728 },
+    { 0x00009b1c, 0x0000f788, 0x0000f788, 0x0000972c, 0x0000972c, 0x0000972c },
+    { 0x00009b20, 0x0000f78c, 0x0000f78c, 0x000097a0, 0x000097a0, 0x000097a0 },
+    { 0x00009b24, 0x0000f790, 0x0000f790, 0x000097a4, 0x000097a4, 0x000097a4 },
+    { 0x00009b28, 0x0000f794, 0x0000f794, 0x000097a8, 0x000097a8, 0x000097a8 },
+    { 0x00009b2c, 0x0000f7a4, 0x0000f7a4, 0x000097b0, 0x000097b0, 0x000097b0 },
+    { 0x00009b30, 0x0000f7a8, 0x0000f7a8, 0x000097b4, 0x000097b4, 0x000097b4 },
+    { 0x00009b34, 0x0000f7ac, 0x0000f7ac, 0x000097b8, 0x000097b8, 0x000097b8 },
+    { 0x00009b38, 0x0000f7b0, 0x0000f7b0, 0x000097a5, 0x000097a5, 0x000097a5 },
+    { 0x00009b3c, 0x0000f7b4, 0x0000f7b4, 0x000097a9, 0x000097a9, 0x000097a9 },
+    { 0x00009b40, 0x0000f7a1, 0x0000f7a1, 0x000097ad, 0x000097ad, 0x000097ad },
+    { 0x00009b44, 0x0000f7a5, 0x0000f7a5, 0x000097b1, 0x000097b1, 0x000097b1 },
+    { 0x00009b48, 0x0000f7a9, 0x0000f7a9, 0x000097b5, 0x000097b5, 0x000097b5 },
+    { 0x00009b4c, 0x0000f7ad, 0x0000f7ad, 0x000097b9, 0x000097b9, 0x000097b9 },
+    { 0x00009b50, 0x0000f7b1, 0x0000f7b1, 0x000097c5, 0x000097c5, 0x000097c5 },
+    { 0x00009b54, 0x0000f7b5, 0x0000f7b5, 0x000097c9, 0x000097c9, 0x000097c9 },
+    { 0x00009b58, 0x0000f7c5, 0x0000f7c5, 0x000097d1, 0x000097d1, 0x000097d1 },
+    { 0x00009b5c, 0x0000f7c9, 0x0000f7c9, 0x000097d5, 0x000097d5, 0x000097d5 },
+    { 0x00009b60, 0x0000f7cd, 0x0000f7cd, 0x000097d9, 0x000097d9, 0x000097d9 },
+    { 0x00009b64, 0x0000f7d1, 0x0000f7d1, 0x000097c6, 0x000097c6, 0x000097c6 },
+    { 0x00009b68, 0x0000f7d5, 0x0000f7d5, 0x000097ca, 0x000097ca, 0x000097ca },
+    { 0x00009b6c, 0x0000f7c2, 0x0000f7c2, 0x000097ce, 0x000097ce, 0x000097ce },
+    { 0x00009b70, 0x0000f7c6, 0x0000f7c6, 0x000097d2, 0x000097d2, 0x000097d2 },
+    { 0x00009b74, 0x0000f7ca, 0x0000f7ca, 0x000097d6, 0x000097d6, 0x000097d6 },
+    { 0x00009b78, 0x0000f7ce, 0x0000f7ce, 0x000097c3, 0x000097c3, 0x000097c3 },
+    { 0x00009b7c, 0x0000f7d2, 0x0000f7d2, 0x000097c7, 0x000097c7, 0x000097c7 },
+    { 0x00009b80, 0x0000f7d6, 0x0000f7d6, 0x000097cb, 0x000097cb, 0x000097cb },
+    { 0x00009b84, 0x0000f7c3, 0x0000f7c3, 0x000097cf, 0x000097cf, 0x000097cf },
+    { 0x00009b88, 0x0000f7c7, 0x0000f7c7, 0x000097d7, 0x000097d7, 0x000097d7 },
+    { 0x00009b8c, 0x0000f7cb, 0x0000f7cb, 0x000097db, 0x000097db, 0x000097db },
+    { 0x00009b90, 0x0000f7d3, 0x0000f7d3, 0x000097db, 0x000097db, 0x000097db },
+    { 0x00009b94, 0x0000f7d7, 0x0000f7d7, 0x000097db, 0x000097db, 0x000097db },
+    { 0x00009b98, 0x0000f7db, 0x0000f7db, 0x000097db, 0x000097db, 0x000097db },
+    { 0x00009b9c, 0x0000f7db, 0x0000f7db, 0x000097db, 0x000097db, 0x000097db },
+    { 0x00009ba0, 0x0000f7db, 0x0000f7db, 0x000097db, 0x000097db, 0x000097db },
+    { 0x00009ba4, 0x0000f7db, 0x0000f7db, 0x000097db, 0x000097db, 0x000097db },
+    { 0x00009ba8, 0x0000f7db, 0x0000f7db, 0x000097db, 0x000097db, 0x000097db },
+    { 0x00009bac, 0x0000f7db, 0x0000f7db, 0x000097db, 0x000097db, 0x000097db },
+    { 0x00009bb0, 0x0000f7db, 0x0000f7db, 0x000097db, 0x000097db, 0x000097db },
+    { 0x00009bb4, 0x0000f7db, 0x0000f7db, 0x000097db, 0x000097db, 0x000097db },
+    { 0x00009bb8, 0x0000f7db, 0x0000f7db, 0x000097db, 0x000097db, 0x000097db },
+    { 0x00009bbc, 0x0000f7db, 0x0000f7db, 0x000097db, 0x000097db, 0x000097db },
+    { 0x00009bc0, 0x0000f7db, 0x0000f7db, 0x000097db, 0x000097db, 0x000097db },
+    { 0x00009bc4, 0x0000f7db, 0x0000f7db, 0x000097db, 0x000097db, 0x000097db },
+    { 0x00009bc8, 0x0000f7db, 0x0000f7db, 0x000097db, 0x000097db, 0x000097db },
+    { 0x00009bcc, 0x0000f7db, 0x0000f7db, 0x000097db, 0x000097db, 0x000097db },
+    { 0x00009bd0, 0x0000f7db, 0x0000f7db, 0x000097db, 0x000097db, 0x000097db },
+    { 0x00009bd4, 0x0000f7db, 0x0000f7db, 0x000097db, 0x000097db, 0x000097db },
+    { 0x00009bd8, 0x0000f7db, 0x0000f7db, 0x000097db, 0x000097db, 0x000097db },
+    { 0x00009bdc, 0x0000f7db, 0x0000f7db, 0x000097db, 0x000097db, 0x000097db },
+    { 0x00009be0, 0x0000f7db, 0x0000f7db, 0x000097db, 0x000097db, 0x000097db },
+    { 0x00009be4, 0x0000f7db, 0x0000f7db, 0x000097db, 0x000097db, 0x000097db },
+    { 0x00009be8, 0x0000f7db, 0x0000f7db, 0x000097db, 0x000097db, 0x000097db },
+    { 0x00009bec, 0x0000f7db, 0x0000f7db, 0x000097db, 0x000097db, 0x000097db },
+    { 0x00009bf0, 0x0000f7db, 0x0000f7db, 0x000097db, 0x000097db, 0x000097db },
+    { 0x00009bf4, 0x0000f7db, 0x0000f7db, 0x000097db, 0x000097db, 0x000097db },
+    { 0x00009bf8, 0x0000f7db, 0x0000f7db, 0x000097db, 0x000097db, 0x000097db },
+    { 0x00009bfc, 0x0000f7db, 0x0000f7db, 0x000097db, 0x000097db, 0x000097db },
+    { 0x0000a204, 0x00000444, 0x00000444, 0x00000444, 0x00000444, 0x00000444 },
+    { 0x0000a208, 0x803e4788, 0x803e4788, 0x803e4788, 0x803e4788, 0x803e4788 },
+    { 0x0000a20c, 0x00000014, 0x00000014, 0x0001f019, 0x0001f019, 0x0001f019 },
+    { 0x0000b20c, 0x00000014, 0x00000014, 0x0001f019, 0x0001f019, 0x0001f019 },
+    { 0x0000a21c, 0x1463800a, 0x1463800a, 0x1463800a, 0x1463800a, 0x1463800a },
+    { 0x0000a230, 0x00000000, 0x00000000, 0x00000210, 0x00000108, 0x00000000 },
+    { 0x0000a250, 0x001ff000, 0x001ff000, 0x001da000, 0x001da000, 0x001da000 },
+    { 0x0000a274, 0x0a19c652, 0x0a19c652, 0x0a1aa652, 0x0a1aa652, 0x0a1aa652 },
+    { 0x0000a300, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 },
+    { 0x0000a304, 0x00003002, 0x00003002, 0x00003002, 0x00003002, 0x00003002 },
+    { 0x0000a308, 0x00006004, 0x00006004, 0x00008009, 0x00008009, 0x00008009 },
+    { 0x0000a30c, 0x0000a006, 0x0000a006, 0x0000b00b, 0x0000b00b, 0x0000b00b },
+    { 0x0000a310, 0x0000e012, 0x0000e012, 0x0000e012, 0x0000e012, 0x0000e012 },
+    { 0x0000a314, 0x00011014, 0x00011014, 0x00012048, 0x00012048, 0x00012048 },
+    { 0x0000a318, 0x0001504a, 0x0001504a, 0x0001604a, 0x0001604a, 0x0001604a },
+    { 0x0000a31c, 0x0001904c, 0x0001904c, 0x0001a211, 0x0001a211, 0x0001a211 },
+    { 0x0000a320, 0x0001c04e, 0x0001c04e, 0x0001e213, 0x0001e213, 0x0001e213 },
+    { 0x0000a324, 0x00020092, 0x00020092, 0x0002121b, 0x0002121b, 0x0002121b },
+    { 0x0000a328, 0x0002410a, 0x0002410a, 0x00024412, 0x00024412, 0x00024412 },
+    { 0x0000a32c, 0x0002710c, 0x0002710c, 0x00028414, 0x00028414, 0x00028414 },
+    { 0x0000a330, 0x0002b18b, 0x0002b18b, 0x0002b44a, 0x0002b44a, 0x0002b44a },
+    { 0x0000a334, 0x0002e1cc, 0x0002e1cc, 0x00030649, 0x00030649, 0x00030649 },
+    { 0x0000a338, 0x000321ec, 0x000321ec, 0x0003364b, 0x0003364b, 0x0003364b },
+    { 0x0000a33c, 0x000321ec, 0x000321ec, 0x00038a49, 0x00038a49, 0x00038a49 },
+    { 0x0000a340, 0x000321ec, 0x000321ec, 0x0003be48, 0x0003be48, 0x0003be48 },
+    { 0x0000a344, 0x000321ec, 0x000321ec, 0x0003ee4a, 0x0003ee4a, 0x0003ee4a },
+    { 0x0000a348, 0x000321ec, 0x000321ec, 0x00042e88, 0x00042e88, 0x00042e88 },
+    { 0x0000a34c, 0x000321ec, 0x000321ec, 0x00046e8a, 0x00046e8a, 0x00046e8a },
+    { 0x0000a350, 0x000321ec, 0x000321ec, 0x00049ec9, 0x00049ec9, 0x00049ec9 },
+    { 0x0000a354, 0x000321ec, 0x000321ec, 0x0004bf42, 0x0004bf42, 0x0004bf42 },
+    { 0x0000a358, 0x7999aa02, 0x7999aa02, 0x7999aa0e, 0x7999aa0e, 0x7999aa0e },
+    { 0x0000a3d8, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 },
+    { 0x00007894, 0x5a508000, 0x5a508000, 0x5a508000, 0x5a508000, 0x5a508000 },
+};
+
+static const u32 ar9280Common_9280_2[][2] = {
+    { 0x0000000c, 0x00000000 },
+    { 0x00000030, 0x00020015 },
+    { 0x00000034, 0x00000005 },
+    { 0x00000040, 0x00000000 },
+    { 0x00000044, 0x00000008 },
+    { 0x00000048, 0x00000008 },
+    { 0x0000004c, 0x00000010 },
+    { 0x00000050, 0x00000000 },
+    { 0x00000054, 0x0000001f },
+    { 0x00000800, 0x00000000 },
+    { 0x00000804, 0x00000000 },
+    { 0x00000808, 0x00000000 },
+    { 0x0000080c, 0x00000000 },
+    { 0x00000810, 0x00000000 },
+    { 0x00000814, 0x00000000 },
+    { 0x00000818, 0x00000000 },
+    { 0x0000081c, 0x00000000 },
+    { 0x00000820, 0x00000000 },
+    { 0x00000824, 0x00000000 },
+    { 0x00001040, 0x002ffc0f },
+    { 0x00001044, 0x002ffc0f },
+    { 0x00001048, 0x002ffc0f },
+    { 0x0000104c, 0x002ffc0f },
+    { 0x00001050, 0x002ffc0f },
+    { 0x00001054, 0x002ffc0f },
+    { 0x00001058, 0x002ffc0f },
+    { 0x0000105c, 0x002ffc0f },
+    { 0x00001060, 0x002ffc0f },
+    { 0x00001064, 0x002ffc0f },
+    { 0x00001230, 0x00000000 },
+    { 0x00001270, 0x00000000 },
+    { 0x00001038, 0x00000000 },
+    { 0x00001078, 0x00000000 },
+    { 0x000010b8, 0x00000000 },
+    { 0x000010f8, 0x00000000 },
+    { 0x00001138, 0x00000000 },
+    { 0x00001178, 0x00000000 },
+    { 0x000011b8, 0x00000000 },
+    { 0x000011f8, 0x00000000 },
+    { 0x00001238, 0x00000000 },
+    { 0x00001278, 0x00000000 },
+    { 0x000012b8, 0x00000000 },
+    { 0x000012f8, 0x00000000 },
+    { 0x00001338, 0x00000000 },
+    { 0x00001378, 0x00000000 },
+    { 0x000013b8, 0x00000000 },
+    { 0x000013f8, 0x00000000 },
+    { 0x00001438, 0x00000000 },
+    { 0x00001478, 0x00000000 },
+    { 0x000014b8, 0x00000000 },
+    { 0x000014f8, 0x00000000 },
+    { 0x00001538, 0x00000000 },
+    { 0x00001578, 0x00000000 },
+    { 0x000015b8, 0x00000000 },
+    { 0x000015f8, 0x00000000 },
+    { 0x00001638, 0x00000000 },
+    { 0x00001678, 0x00000000 },
+    { 0x000016b8, 0x00000000 },
+    { 0x000016f8, 0x00000000 },
+    { 0x00001738, 0x00000000 },
+    { 0x00001778, 0x00000000 },
+    { 0x000017b8, 0x00000000 },
+    { 0x000017f8, 0x00000000 },
+    { 0x0000103c, 0x00000000 },
+    { 0x0000107c, 0x00000000 },
+    { 0x000010bc, 0x00000000 },
+    { 0x000010fc, 0x00000000 },
+    { 0x0000113c, 0x00000000 },
+    { 0x0000117c, 0x00000000 },
+    { 0x000011bc, 0x00000000 },
+    { 0x000011fc, 0x00000000 },
+    { 0x0000123c, 0x00000000 },
+    { 0x0000127c, 0x00000000 },
+    { 0x000012bc, 0x00000000 },
+    { 0x000012fc, 0x00000000 },
+    { 0x0000133c, 0x00000000 },
+    { 0x0000137c, 0x00000000 },
+    { 0x000013bc, 0x00000000 },
+    { 0x000013fc, 0x00000000 },
+    { 0x0000143c, 0x00000000 },
+    { 0x0000147c, 0x00000000 },
+    { 0x00004030, 0x00000002 },
+    { 0x0000403c, 0x00000002 },
+    { 0x00004024, 0x0000001f },
+    { 0x00004060, 0x00000000 },
+    { 0x00004064, 0x00000000 },
+    { 0x00007010, 0x00000033 },
+    { 0x00007034, 0x00000002 },
+    { 0x00007038, 0x000004c2 },
+    { 0x00008004, 0x00000000 },
+    { 0x00008008, 0x00000000 },
+    { 0x0000800c, 0x00000000 },
+    { 0x00008018, 0x00000700 },
+    { 0x00008020, 0x00000000 },
+    { 0x00008038, 0x00000000 },
+    { 0x0000803c, 0x00000000 },
+    { 0x00008048, 0x40000000 },
+    { 0x00008054, 0x00000000 },
+    { 0x00008058, 0x00000000 },
+    { 0x0000805c, 0x000fc78f },
+    { 0x00008060, 0x0000000f },
+    { 0x00008064, 0x00000000 },
+    { 0x00008070, 0x00000000 },
+    { 0x000080c0, 0x2a80001a },
+    { 0x000080c4, 0x05dc01e0 },
+    { 0x000080c8, 0x1f402710 },
+    { 0x000080cc, 0x01f40000 },
+    { 0x000080d0, 0x00001e00 },
+    { 0x000080d4, 0x00000000 },
+    { 0x000080d8, 0x00400000 },
+    { 0x000080e0, 0xffffffff },
+    { 0x000080e4, 0x0000ffff },
+    { 0x000080e8, 0x003f3f3f },
+    { 0x000080ec, 0x00000000 },
+    { 0x000080f0, 0x00000000 },
+    { 0x000080f4, 0x00000000 },
+    { 0x000080f8, 0x00000000 },
+    { 0x000080fc, 0x00020000 },
+    { 0x00008100, 0x00020000 },
+    { 0x00008104, 0x00000001 },
+    { 0x00008108, 0x00000052 },
+    { 0x0000810c, 0x00000000 },
+    { 0x00008110, 0x00000168 },
+    { 0x00008118, 0x000100aa },
+    { 0x0000811c, 0x00003210 },
+    { 0x00008120, 0x08f04800 },
+    { 0x00008124, 0x00000000 },
+    { 0x00008128, 0x00000000 },
+    { 0x0000812c, 0x00000000 },
+    { 0x00008130, 0x00000000 },
+    { 0x00008134, 0x00000000 },
+    { 0x00008138, 0x00000000 },
+    { 0x0000813c, 0x00000000 },
+    { 0x00008144, 0x00000000 },
+    { 0x00008168, 0x00000000 },
+    { 0x0000816c, 0x00000000 },
+    { 0x00008170, 0x32143320 },
+    { 0x00008174, 0xfaa4fa50 },
+    { 0x00008178, 0x00000100 },
+    { 0x0000817c, 0x00000000 },
+    { 0x000081c0, 0x00000000 },
+    { 0x000081d0, 0x00003210 },
+    { 0x000081ec, 0x00000000 },
+    { 0x000081f0, 0x00000000 },
+    { 0x000081f4, 0x00000000 },
+    { 0x000081f8, 0x00000000 },
+    { 0x000081fc, 0x00000000 },
+    { 0x00008200, 0x00000000 },
+    { 0x00008204, 0x00000000 },
+    { 0x00008208, 0x00000000 },
+    { 0x0000820c, 0x00000000 },
+    { 0x00008210, 0x00000000 },
+    { 0x00008214, 0x00000000 },
+    { 0x00008218, 0x00000000 },
+    { 0x0000821c, 0x00000000 },
+    { 0x00008220, 0x00000000 },
+    { 0x00008224, 0x00000000 },
+    { 0x00008228, 0x00000000 },
+    { 0x0000822c, 0x00000000 },
+    { 0x00008230, 0x00000000 },
+    { 0x00008234, 0x00000000 },
+    { 0x00008238, 0x00000000 },
+    { 0x0000823c, 0x00000000 },
+    { 0x00008240, 0x00100000 },
+    { 0x00008244, 0x0010f400 },
+    { 0x00008248, 0x00000100 },
+    { 0x0000824c, 0x0001e800 },
+    { 0x00008250, 0x00000000 },
+    { 0x00008254, 0x00000000 },
+    { 0x00008258, 0x00000000 },
+    { 0x0000825c, 0x400000ff },
+    { 0x00008260, 0x00080922 },
+    { 0x00008270, 0x00000000 },
+    { 0x00008274, 0x40000000 },
+    { 0x00008278, 0x003e4180 },
+    { 0x0000827c, 0x00000000 },
+    { 0x00008284, 0x0000002c },
+    { 0x00008288, 0x0000002c },
+    { 0x0000828c, 0x00000000 },
+    { 0x00008294, 0x00000000 },
+    { 0x00008298, 0x00000000 },
+    { 0x0000829c, 0x00000000 },
+    { 0x00008300, 0x00000040 },
+    { 0x00008314, 0x00000000 },
+    { 0x00008328, 0x00000000 },
+    { 0x0000832c, 0x00000007 },
+    { 0x00008330, 0x00000302 },
+    { 0x00008334, 0x00000e00 },
+    { 0x00008338, 0x00000000 },
+    { 0x0000833c, 0x00000000 },
+    { 0x00008340, 0x000107ff },
+    { 0x00008344, 0x00581043 },
+    { 0x00009808, 0x00000000 },
+    { 0x0000980c, 0xafa68e30 },
+    { 0x00009810, 0xfd14e000 },
+    { 0x00009814, 0x9c0a9f6b },
+    { 0x0000981c, 0x00000000 },
+    { 0x0000982c, 0x0000a000 },
+    { 0x00009830, 0x00000000 },
+    { 0x0000983c, 0x00200400 },
+    { 0x0000984c, 0x0040233c },
+    { 0x0000a84c, 0x0040233c },
+    { 0x00009854, 0x00000044 },
+    { 0x00009900, 0x00000000 },
+    { 0x00009904, 0x00000000 },
+    { 0x00009908, 0x00000000 },
+    { 0x0000990c, 0x00000000 },
+    { 0x00009910, 0x01002310 },
+    { 0x0000991c, 0x10000fff },
+    { 0x00009920, 0x04900000 },
+    { 0x0000a920, 0x04900000 },
+    { 0x00009928, 0x00000001 },
+    { 0x0000992c, 0x00000004 },
+    { 0x00009934, 0x1e1f2022 },
+    { 0x00009938, 0x0a0b0c0d },
+    { 0x0000993c, 0x00000000 },
+    { 0x00009948, 0x9280c00a },
+    { 0x0000994c, 0x00020028 },
+    { 0x00009954, 0x5f3ca3de },
+    { 0x00009958, 0x2108ecff },
+    { 0x00009940, 0x14750604 },
+    { 0x0000c95c, 0x004b6a8e },
+    { 0x0000c968, 0x000003ce },
+    { 0x00009970, 0x190fb515 },
+    { 0x00009974, 0x00000000 },
+    { 0x00009978, 0x00000001 },
+    { 0x0000997c, 0x00000000 },
+    { 0x00009980, 0x00000000 },
+    { 0x00009984, 0x00000000 },
+    { 0x00009988, 0x00000000 },
+    { 0x0000998c, 0x00000000 },
+    { 0x00009990, 0x00000000 },
+    { 0x00009994, 0x00000000 },
+    { 0x00009998, 0x00000000 },
+    { 0x0000999c, 0x00000000 },
+    { 0x000099a0, 0x00000000 },
+    { 0x000099a4, 0x00000001 },
+    { 0x000099a8, 0x201fff00 },
+    { 0x000099ac, 0x006f0000 },
+    { 0x000099b0, 0x03051000 },
+    { 0x000099b4, 0x00000820 },
+    { 0x000099dc, 0x00000000 },
+    { 0x000099e0, 0x00000000 },
+    { 0x000099e4, 0xaaaaaaaa },
+    { 0x000099e8, 0x3c466478 },
+    { 0x000099ec, 0x0cc80caa },
+    { 0x000099f0, 0x00000000 },
+    { 0x000099fc, 0x00001042 },
+    { 0x0000a210, 0x4080a333 },
+    { 0x0000a214, 0x40206c10 },
+    { 0x0000a218, 0x009c4060 },
+    { 0x0000a220, 0x01834061 },
+    { 0x0000a224, 0x00000400 },
+    { 0x0000a228, 0x000003b5 },
+    { 0x0000a22c, 0x233f71c0 },
+    { 0x0000a234, 0x20202020 },
+    { 0x0000a238, 0x20202020 },
+    { 0x0000a23c, 0x13c88000 },
+    { 0x0000a240, 0x38490a20 },
+    { 0x0000a244, 0x00007bb6 },
+    { 0x0000a248, 0x0fff3ffc },
+    { 0x0000a24c, 0x00000000 },
+    { 0x0000a254, 0x00000000 },
+    { 0x0000a258, 0x0cdbd380 },
+    { 0x0000a25c, 0x0f0f0f01 },
+    { 0x0000a260, 0xdfa91f01 },
+    { 0x0000a268, 0x00000000 },
+    { 0x0000a26c, 0x0ebae9c6 },
+    { 0x0000b26c, 0x0ebae9c6 },
+    { 0x0000d270, 0x00820820 },
+    { 0x0000a278, 0x1ce739ce },
+    { 0x0000a27c, 0x050701ce },
+    { 0x0000d35c, 0x07ffffef },
+    { 0x0000d360, 0x0fffffe7 },
+    { 0x0000d364, 0x17ffffe5 },
+    { 0x0000d368, 0x1fffffe4 },
+    { 0x0000d36c, 0x37ffffe3 },
+    { 0x0000d370, 0x3fffffe3 },
+    { 0x0000d374, 0x57ffffe3 },
+    { 0x0000d378, 0x5fffffe2 },
+    { 0x0000d37c, 0x7fffffe2 },
+    { 0x0000d380, 0x7f3c7bba },
+    { 0x0000d384, 0xf3307ff0 },
+    { 0x0000a388, 0x0c000000 },
+    { 0x0000a38c, 0x20202020 },
+    { 0x0000a390, 0x20202020 },
+    { 0x0000a394, 0x1ce739ce },
+    { 0x0000a398, 0x000001ce },
+    { 0x0000a39c, 0x00000001 },
+    { 0x0000a3a0, 0x00000000 },
+    { 0x0000a3a4, 0x00000000 },
+    { 0x0000a3a8, 0x00000000 },
+    { 0x0000a3ac, 0x00000000 },
+    { 0x0000a3b0, 0x00000000 },
+    { 0x0000a3b4, 0x00000000 },
+    { 0x0000a3b8, 0x00000000 },
+    { 0x0000a3bc, 0x00000000 },
+    { 0x0000a3c0, 0x00000000 },
+    { 0x0000a3c4, 0x00000000 },
+    { 0x0000a3c8, 0x00000246 },
+    { 0x0000a3cc, 0x20202020 },
+    { 0x0000a3d0, 0x20202020 },
+    { 0x0000a3d4, 0x20202020 },
+    { 0x0000a3dc, 0x1ce739ce },
+    { 0x0000a3e0, 0x000001ce },
+    { 0x0000a3e4, 0x00000000 },
+    { 0x0000a3e8, 0x18c43433 },
+    { 0x0000a3ec, 0x00f70081 },
+    { 0x00007800, 0x00040000 },
+    { 0x00007804, 0xdb005012 },
+    { 0x00007808, 0x04924914 },
+    { 0x0000780c, 0x21084210 },
+    { 0x00007810, 0x6d801300 },
+    { 0x00007814, 0x0019beff },
+    { 0x00007818, 0x07e41000 },
+    { 0x0000781c, 0x00392000 },
+    { 0x00007820, 0x92592480 },
+    { 0x00007824, 0x00040000 },
+    { 0x00007828, 0xdb005012 },
+    { 0x0000782c, 0x04924914 },
+    { 0x00007830, 0x21084210 },
+    { 0x00007834, 0x6d801300 },
+    { 0x00007838, 0x0019beff },
+    { 0x0000783c, 0x07e40000 },
+    { 0x00007840, 0x00392000 },
+    { 0x00007844, 0x92592480 },
+    { 0x00007848, 0x00100000 },
+    { 0x0000784c, 0x773f0567 },
+    { 0x00007850, 0x54214514 },
+    { 0x00007854, 0x12035828 },
+    { 0x00007858, 0x9259269a },
+    { 0x00007860, 0x52802000 },
+    { 0x00007864, 0x0a8e370e },
+    { 0x00007868, 0xc0102850 },
+    { 0x0000786c, 0x812d4000 },
+    { 0x00007870, 0x807ec400 },
+    { 0x00007874, 0x001b6db0 },
+    { 0x00007878, 0x00376b63 },
+    { 0x0000787c, 0x06db6db6 },
+    { 0x00007880, 0x006d8000 },
+    { 0x00007884, 0xffeffffe },
+    { 0x00007888, 0xffeffffe },
+    { 0x0000788c, 0x00010000 },
+    { 0x00007890, 0x02060aeb },
+    { 0x00007898, 0x2a850160 },
+};
+
+static const u32 ar9280Modes_fast_clock_9280_2[][3] = {
+    { 0x00001030, 0x00000268, 0x000004d0 },
+    { 0x00001070, 0x0000018c, 0x00000318 },
+    { 0x000010b0, 0x00000fd0, 0x00001fa0 },
+    { 0x00008014, 0x044c044c, 0x08980898 },
+    { 0x0000801c, 0x148ec02b, 0x148ec057 },
+    { 0x00008318, 0x000044c0, 0x00008980 },
+    { 0x00009820, 0x02020200, 0x02020200 },
+    { 0x00009824, 0x00000f0f, 0x00000f0f },
+    { 0x00009828, 0x0b020001, 0x0b020001 },
+    { 0x00009834, 0x00000f0f, 0x00000f0f },
+    { 0x00009844, 0x03721821, 0x03721821 },
+    { 0x00009914, 0x00000898, 0x00000898 },
+    { 0x00009918, 0x0000000b, 0x00000016 },
+    { 0x00009944, 0xdfbc1210, 0xdfbc1210 },
+};
+
+
+
+static const u32 ar9280PciePhy_clkreq_off_L1_9280[][2] = {
+    {0x00004040,  0x9248fd00 },
+    {0x00004040,  0x24924924 },
+    {0x00004040,  0xa8000019 },
+    {0x00004040,  0x13160820 },
+    {0x00004040,  0xe5980560 },
+    {0x00004040,  0x401dcffc },
+    {0x00004040,  0x1aaabe40 },
+    {0x00004040,  0xbe105554 },
+    {0x00004040,  0x00043007 },
+    {0x00004044,  0x00000000 },
+};
+
+
+
+static const u32 ar9280PciePhy_clkreq_always_on_L1_9280[][2] = {
+    {0x00004040,  0x9248fd00 },
+    {0x00004040,  0x24924924 },
+    {0x00004040,  0xa8000019 },
+    {0x00004040,  0x13160820 },
+    {0x00004040,  0xe5980560 },
+    {0x00004040,  0x401dcffd },
+    {0x00004040,  0x1aaabe40 },
+    {0x00004040,  0xbe105554 },
+    {0x00004040,  0x00043007 },
+    {0x00004044,  0x00000000 },
+};
diff --git a/drivers/net/wireless/ath9k/main.c b/drivers/net/wireless/ath9k/main.c
new file mode 100644
index 000000000000..c5107f269f24
--- /dev/null
+++ b/drivers/net/wireless/ath9k/main.c
@@ -0,0 +1,1480 @@
+/*
+ * Copyright (c) 2008 Atheros Communications Inc.
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+/* mac80211 and PCI callbacks */
+
+#include <linux/nl80211.h>
+#include "core.h"
+
+#define ATH_PCI_VERSION "0.1"
+
+#define IEEE80211_HTCAP_MAXRXAMPDU_FACTOR	13
+#define IEEE80211_ACTION_CAT_HT			7
+#define IEEE80211_ACTION_HT_TXCHWIDTH		0
+
+static char *dev_info = "ath9k";
+
+MODULE_AUTHOR("Atheros Communications");
+MODULE_DESCRIPTION("Support for Atheros 802.11n wireless LAN cards.");
+MODULE_SUPPORTED_DEVICE("Atheros 802.11n WLAN cards");
+MODULE_LICENSE("Dual BSD/GPL");
+
+static struct pci_device_id ath_pci_id_table[] __devinitdata = {
+	{ PCI_VDEVICE(ATHEROS, 0x0023) }, /* PCI   */
+	{ PCI_VDEVICE(ATHEROS, 0x0024) }, /* PCI-E */
+	{ PCI_VDEVICE(ATHEROS, 0x0027) }, /* PCI   */
+	{ PCI_VDEVICE(ATHEROS, 0x0029) }, /* PCI   */
+	{ PCI_VDEVICE(ATHEROS, 0x002A) }, /* PCI-E */
+	{ 0 }
+};
+
+static int ath_get_channel(struct ath_softc *sc,
+			   struct ieee80211_channel *chan)
+{
+	int i;
+
+	for (i = 0; i < sc->sc_ah->ah_nchan; i++) {
+		if (sc->sc_ah->ah_channels[i].channel == chan->center_freq)
+			return i;
+	}
+
+	return -1;
+}
+
+static u32 ath_get_extchanmode(struct ath_softc *sc,
+				     struct ieee80211_channel *chan)
+{
+	u32 chanmode = 0;
+	u8 ext_chan_offset = sc->sc_ht_info.ext_chan_offset;
+	enum ath9k_ht_macmode tx_chan_width = sc->sc_ht_info.tx_chan_width;
+
+	switch (chan->band) {
+	case IEEE80211_BAND_2GHZ:
+		if ((ext_chan_offset == IEEE80211_HT_IE_CHA_SEC_NONE) &&
+		    (tx_chan_width == ATH9K_HT_MACMODE_20))
+			chanmode = CHANNEL_G_HT20;
+		if ((ext_chan_offset == IEEE80211_HT_IE_CHA_SEC_ABOVE) &&
+		    (tx_chan_width == ATH9K_HT_MACMODE_2040))
+			chanmode = CHANNEL_G_HT40PLUS;
+		if ((ext_chan_offset == IEEE80211_HT_IE_CHA_SEC_BELOW) &&
+		    (tx_chan_width == ATH9K_HT_MACMODE_2040))
+			chanmode = CHANNEL_G_HT40MINUS;
+		break;
+	case IEEE80211_BAND_5GHZ:
+		if ((ext_chan_offset == IEEE80211_HT_IE_CHA_SEC_NONE) &&
+		    (tx_chan_width == ATH9K_HT_MACMODE_20))
+			chanmode = CHANNEL_A_HT20;
+		if ((ext_chan_offset == IEEE80211_HT_IE_CHA_SEC_ABOVE) &&
+		    (tx_chan_width == ATH9K_HT_MACMODE_2040))
+			chanmode = CHANNEL_A_HT40PLUS;
+		if ((ext_chan_offset == IEEE80211_HT_IE_CHA_SEC_BELOW) &&
+		    (tx_chan_width == ATH9K_HT_MACMODE_2040))
+			chanmode = CHANNEL_A_HT40MINUS;
+		break;
+	default:
+		break;
+	}
+
+	return chanmode;
+}
+
+
+static int ath_setkey_tkip(struct ath_softc *sc,
+			   struct ieee80211_key_conf *key,
+			   struct ath9k_keyval *hk,
+			   const u8 *addr)
+{
+	u8 *key_rxmic = NULL;
+	u8 *key_txmic = NULL;
+
+	key_txmic = key->key + NL80211_TKIP_DATA_OFFSET_TX_MIC_KEY;
+	key_rxmic = key->key + NL80211_TKIP_DATA_OFFSET_RX_MIC_KEY;
+
+	if (addr == NULL) {
+		/* Group key installation */
+		memcpy(hk->kv_mic,  key_rxmic, sizeof(hk->kv_mic));
+		return ath_keyset(sc, key->keyidx, hk, addr);
+	}
+	if (!sc->sc_splitmic) {
+		/*
+		 * data key goes at first index,
+		 * the hal handles the MIC keys at index+64.
+		 */
+		memcpy(hk->kv_mic, key_rxmic, sizeof(hk->kv_mic));
+		memcpy(hk->kv_txmic, key_txmic, sizeof(hk->kv_txmic));
+		return ath_keyset(sc, key->keyidx, hk, addr);
+	}
+	/*
+	 * TX key goes at first index, RX key at +32.
+	 * The hal handles the MIC keys at index+64.
+	 */
+	memcpy(hk->kv_mic, key_txmic, sizeof(hk->kv_mic));
+	if (!ath_keyset(sc, key->keyidx, hk, NULL)) {
+		/* Txmic entry failed. No need to proceed further */
+		DPRINTF(sc, ATH_DBG_KEYCACHE,
+			"%s Setting TX MIC Key Failed\n", __func__);
+		return 0;
+	}
+
+	memcpy(hk->kv_mic, key_rxmic, sizeof(hk->kv_mic));
+	/* XXX delete tx key on failure? */
+	return ath_keyset(sc, key->keyidx+32, hk, addr);
+}
+
+static int ath_key_config(struct ath_softc *sc,
+			  const u8 *addr,
+			  struct ieee80211_key_conf *key)
+{
+	struct ieee80211_vif *vif;
+	struct ath9k_keyval hk;
+	const u8 *mac = NULL;
+	int ret = 0;
+	enum ieee80211_if_types opmode;
+
+	memset(&hk, 0, sizeof(hk));
+
+	switch (key->alg) {
+	case ALG_WEP:
+		hk.kv_type = ATH9K_CIPHER_WEP;
+		break;
+	case ALG_TKIP:
+		hk.kv_type = ATH9K_CIPHER_TKIP;
+		break;
+	case ALG_CCMP:
+		hk.kv_type = ATH9K_CIPHER_AES_CCM;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	hk.kv_len  = key->keylen;
+	memcpy(hk.kv_val, key->key, key->keylen);
+
+	if (!sc->sc_vaps[0])
+		return -EIO;
+
+	vif = sc->sc_vaps[0]->av_if_data;
+	opmode = vif->type;
+
+	/*
+	 *  Strategy:
+	 *   For _M_STA mc tx, we will not setup a key at all since we never
+	 *   tx mc.
+	 *   _M_STA mc rx, we will use the keyID.
+	 *   for _M_IBSS mc tx, we will use the keyID, and no macaddr.
+	 *   for _M_IBSS mc rx, we will alloc a slot and plumb the mac of the
+	 *   peer node. BUT we will plumb a cleartext key so that we can do
+	 *   perSta default key table lookup in software.
+	 */
+	if (is_broadcast_ether_addr(addr)) {
+		switch (opmode) {
+		case IEEE80211_IF_TYPE_STA:
+			/* default key:  could be group WPA key
+			 * or could be static WEP key */
+			mac = NULL;
+			break;
+		case IEEE80211_IF_TYPE_IBSS:
+			break;
+		case IEEE80211_IF_TYPE_AP:
+			break;
+		default:
+			ASSERT(0);
+			break;
+		}
+	} else {
+		mac = addr;
+	}
+
+	if (key->alg == ALG_TKIP)
+		ret = ath_setkey_tkip(sc, key, &hk, mac);
+	else
+		ret = ath_keyset(sc, key->keyidx, &hk, mac);
+
+	if (!ret)
+		return -EIO;
+
+	if (mac)
+		sc->sc_keytype = hk.kv_type;
+	return 0;
+}
+
+static void ath_key_delete(struct ath_softc *sc, struct ieee80211_key_conf *key)
+{
+#define ATH_MAX_NUM_KEYS 4
+	int freeslot;
+
+	freeslot = (key->keyidx >= ATH_MAX_NUM_KEYS) ? 1 : 0;
+	ath_key_reset(sc, key->keyidx, freeslot);
+#undef ATH_MAX_NUM_KEYS
+}
+
+static void setup_ht_cap(struct ieee80211_ht_info *ht_info)
+{
+/* Until mac80211 includes these fields */
+
+#define IEEE80211_HT_CAP_DSSSCCK40 0x1000
+#define	IEEE80211_HT_CAP_MAXRXAMPDU_65536 0x3   /* 2 ^ 16 */
+#define	IEEE80211_HT_CAP_MPDUDENSITY_8 0x6     	/* 8 usec */
+
+	ht_info->ht_supported = 1;
+	ht_info->cap = (u16)IEEE80211_HT_CAP_SUP_WIDTH
+			|(u16)IEEE80211_HT_CAP_MIMO_PS
+			|(u16)IEEE80211_HT_CAP_SGI_40
+			|(u16)IEEE80211_HT_CAP_DSSSCCK40;
+
+	ht_info->ampdu_factor = IEEE80211_HT_CAP_MAXRXAMPDU_65536;
+	ht_info->ampdu_density = IEEE80211_HT_CAP_MPDUDENSITY_8;
+	/* setup supported mcs set */
+	memset(ht_info->supp_mcs_set, 0, 16);
+	ht_info->supp_mcs_set[0] = 0xff;
+	ht_info->supp_mcs_set[1] = 0xff;
+	ht_info->supp_mcs_set[12] = IEEE80211_HT_CAP_MCS_TX_DEFINED;
+}
+
+static int ath_rate2idx(struct ath_softc *sc, int rate)
+{
+	int i = 0, cur_band, n_rates;
+	struct ieee80211_hw *hw = sc->hw;
+
+	cur_band = hw->conf.channel->band;
+	n_rates = sc->sbands[cur_band].n_bitrates;
+
+	for (i = 0; i < n_rates; i++) {
+		if (sc->sbands[cur_band].bitrates[i].bitrate == rate)
+			break;
+	}
+
+	/*
+	 * NB:mac80211 validates rx rate index against the supported legacy rate
+	 * index only (should be done against ht rates also), return the highest
+	 * legacy rate index for rx rate which does not match any one of the
+	 * supported basic and extended rates to make mac80211 happy.
+	 * The following hack will be cleaned up once the issue with
+	 * the rx rate index validation in mac80211 is fixed.
+	 */
+	if (i == n_rates)
+		return n_rates - 1;
+	return i;
+}
+
+static void ath9k_rx_prepare(struct ath_softc *sc,
+			     struct sk_buff *skb,
+			     struct ath_recv_status *status,
+			     struct ieee80211_rx_status *rx_status)
+{
+	struct ieee80211_hw *hw = sc->hw;
+	struct ieee80211_channel *curchan = hw->conf.channel;
+
+	memset(rx_status, 0, sizeof(struct ieee80211_rx_status));
+
+	rx_status->mactime = status->tsf;
+	rx_status->band = curchan->band;
+	rx_status->freq =  curchan->center_freq;
+	rx_status->noise = ATH_DEFAULT_NOISE_FLOOR;
+	rx_status->signal = rx_status->noise + status->rssi;
+	rx_status->rate_idx = ath_rate2idx(sc, (status->rateKbps / 100));
+	rx_status->antenna = status->antenna;
+	rx_status->qual = status->rssi * 100 / 64;
+
+	if (status->flags & ATH_RX_MIC_ERROR)
+		rx_status->flag |= RX_FLAG_MMIC_ERROR;
+	if (status->flags & ATH_RX_FCS_ERROR)
+		rx_status->flag |= RX_FLAG_FAILED_FCS_CRC;
+
+	rx_status->flag |= RX_FLAG_TSFT;
+}
+
+static u8 parse_mpdudensity(u8 mpdudensity)
+{
+	/*
+	 * 802.11n D2.0 defined values for "Minimum MPDU Start Spacing":
+	 *   0 for no restriction
+	 *   1 for 1/4 us
+	 *   2 for 1/2 us
+	 *   3 for 1 us
+	 *   4 for 2 us
+	 *   5 for 4 us
+	 *   6 for 8 us
+	 *   7 for 16 us
+	 */
+	switch (mpdudensity) {
+	case 0:
+		return 0;
+	case 1:
+	case 2:
+	case 3:
+		/* Our lower layer calculations limit our precision to
+		   1 microsecond */
+		return 1;
+	case 4:
+		return 2;
+	case 5:
+		return 4;
+	case 6:
+		return 8;
+	case 7:
+		return 16;
+	default:
+		return 0;
+	}
+}
+
+static int ath9k_start(struct ieee80211_hw *hw)
+{
+	struct ath_softc *sc = hw->priv;
+	struct ieee80211_channel *curchan = hw->conf.channel;
+	int error = 0, pos;
+
+	DPRINTF(sc, ATH_DBG_CONFIG, "%s: Starting driver with "
+		"initial channel: %d MHz\n", __func__, curchan->center_freq);
+
+	/* setup initial channel */
+
+	pos = ath_get_channel(sc, curchan);
+	if (pos == -1) {
+		DPRINTF(sc, ATH_DBG_FATAL, "%s: Invalid channel\n", __func__);
+		return -EINVAL;
+	}
+
+	sc->sc_ah->ah_channels[pos].chanmode =
+		(curchan->band == IEEE80211_BAND_2GHZ) ? CHANNEL_G : CHANNEL_A;
+
+	/* open ath_dev */
+	error = ath_open(sc, &sc->sc_ah->ah_channels[pos]);
+	if (error) {
+		DPRINTF(sc, ATH_DBG_FATAL,
+			"%s: Unable to complete ath_open\n", __func__);
+		return error;
+	}
+
+	ieee80211_wake_queues(hw);
+	return 0;
+}
+
+static int ath9k_tx(struct ieee80211_hw *hw,
+		    struct sk_buff *skb)
+{
+	struct ath_softc *sc = hw->priv;
+	int hdrlen, padsize;
+
+	/* Add the padding after the header if this is not already done */
+	hdrlen = ieee80211_get_hdrlen_from_skb(skb);
+	if (hdrlen & 3) {
+		padsize = hdrlen % 4;
+		if (skb_headroom(skb) < padsize)
+			return -1;
+		skb_push(skb, padsize);
+		memmove(skb->data, skb->data + padsize, hdrlen);
+	}
+
+	DPRINTF(sc, ATH_DBG_XMIT, "%s: transmitting packet, skb: %p\n",
+		__func__,
+		skb);
+
+	if (ath_tx_start(sc, skb) != 0) {
+		DPRINTF(sc, ATH_DBG_XMIT, "%s: TX failed\n", __func__);
+		dev_kfree_skb_any(skb);
+		/* FIXME: Check for proper return value from ATH_DEV */
+		return 0;
+	}
+
+	return 0;
+}
+
+static void ath9k_stop(struct ieee80211_hw *hw)
+{
+	struct ath_softc *sc = hw->priv;
+	int error;
+
+	DPRINTF(sc, ATH_DBG_CONFIG, "%s: Driver halt\n", __func__);
+
+	error = ath_suspend(sc);
+	if (error)
+		DPRINTF(sc, ATH_DBG_CONFIG,
+			"%s: Device is no longer present\n", __func__);
+
+	ieee80211_stop_queues(hw);
+}
+
+static int ath9k_add_interface(struct ieee80211_hw *hw,
+			       struct ieee80211_if_init_conf *conf)
+{
+	struct ath_softc *sc = hw->priv;
+	int error, ic_opmode = 0;
+
+	/* Support only vap for now */
+
+	if (sc->sc_nvaps)
+		return -ENOBUFS;
+
+	switch (conf->type) {
+	case IEEE80211_IF_TYPE_STA:
+		ic_opmode = ATH9K_M_STA;
+		break;
+	case IEEE80211_IF_TYPE_IBSS:
+		ic_opmode = ATH9K_M_IBSS;
+		break;
+	default:
+		DPRINTF(sc, ATH_DBG_FATAL,
+			"%s: Only STA and IBSS are supported currently\n",
+			__func__);
+		return -EOPNOTSUPP;
+	}
+
+	DPRINTF(sc, ATH_DBG_CONFIG, "%s: Attach a VAP of type: %d\n",
+		__func__,
+		ic_opmode);
+
+	error = ath_vap_attach(sc, 0, conf->vif, ic_opmode);
+	if (error) {
+		DPRINTF(sc, ATH_DBG_FATAL,
+			"%s: Unable to attach vap, error: %d\n",
+			__func__, error);
+		return error;
+	}
+
+	return 0;
+}
+
+static void ath9k_remove_interface(struct ieee80211_hw *hw,
+				   struct ieee80211_if_init_conf *conf)
+{
+	struct ath_softc *sc = hw->priv;
+	struct ath_vap *avp;
+	int error;
+
+	DPRINTF(sc, ATH_DBG_CONFIG, "%s: Detach VAP\n", __func__);
+
+	avp = sc->sc_vaps[0];
+	if (avp == NULL) {
+		DPRINTF(sc, ATH_DBG_FATAL, "%s: Invalid interface\n",
+			__func__);
+		return;
+	}
+
+#ifdef CONFIG_SLOW_ANT_DIV
+	ath_slow_ant_div_stop(&sc->sc_antdiv);
+#endif
+
+	/* Update ratectrl */
+	ath_rate_newstate(sc, avp);
+
+	/* Reclaim beacon resources */
+	if (sc->sc_opmode == ATH9K_M_HOSTAP || sc->sc_opmode == ATH9K_M_IBSS) {
+		ath9k_hw_stoptxdma(sc->sc_ah, sc->sc_bhalq);
+		ath_beacon_return(sc, avp);
+	}
+
+	/* Set interrupt mask */
+	sc->sc_imask &= ~(ATH9K_INT_SWBA | ATH9K_INT_BMISS);
+	ath9k_hw_set_interrupts(sc->sc_ah, sc->sc_imask & ~ATH9K_INT_GLOBAL);
+	sc->sc_beacons = 0;
+
+	error = ath_vap_detach(sc, 0);
+	if (error)
+		DPRINTF(sc, ATH_DBG_FATAL,
+			"%s: Unable to detach vap, error: %d\n",
+			__func__, error);
+}
+
+static int ath9k_config(struct ieee80211_hw *hw,
+			struct ieee80211_conf *conf)
+{
+	struct ath_softc *sc = hw->priv;
+	struct ieee80211_channel *curchan = hw->conf.channel;
+	int pos;
+
+	DPRINTF(sc, ATH_DBG_CONFIG, "%s: Set channel: %d MHz\n",
+		__func__,
+		curchan->center_freq);
+
+	pos = ath_get_channel(sc, curchan);
+	if (pos == -1) {
+		DPRINTF(sc, ATH_DBG_FATAL, "%s: Invalid channel\n", __func__);
+		return -EINVAL;
+	}
+
+	sc->sc_ah->ah_channels[pos].chanmode =
+		(curchan->band == IEEE80211_BAND_2GHZ) ?
+		CHANNEL_G : CHANNEL_A;
+
+	if (sc->sc_curaid && hw->conf.ht_conf.ht_supported)
+		sc->sc_ah->ah_channels[pos].chanmode =
+			ath_get_extchanmode(sc, curchan);
+
+	sc->sc_config.txpowlimit = 2 * conf->power_level;
+
+	/* set h/w channel */
+	if (ath_set_channel(sc, &sc->sc_ah->ah_channels[pos]) < 0)
+		DPRINTF(sc, ATH_DBG_FATAL, "%s: Unable to set channel\n",
+			__func__);
+
+	return 0;
+}
+
+static int ath9k_config_interface(struct ieee80211_hw *hw,
+				  struct ieee80211_vif *vif,
+				  struct ieee80211_if_conf *conf)
+{
+	struct ath_softc *sc = hw->priv;
+	struct ath_vap *avp;
+	u32 rfilt = 0;
+	int error, i;
+	DECLARE_MAC_BUF(mac);
+
+	avp = sc->sc_vaps[0];
+	if (avp == NULL) {
+		DPRINTF(sc, ATH_DBG_FATAL, "%s: Invalid interface\n",
+			__func__);
+		return -EINVAL;
+	}
+
+	if ((conf->changed & IEEE80211_IFCC_BSSID) &&
+	    !is_zero_ether_addr(conf->bssid)) {
+		switch (vif->type) {
+		case IEEE80211_IF_TYPE_STA:
+		case IEEE80211_IF_TYPE_IBSS:
+			/* Update ratectrl about the new state */
+			ath_rate_newstate(sc, avp);
+
+			/* Set rx filter */
+			rfilt = ath_calcrxfilter(sc);
+			ath9k_hw_setrxfilter(sc->sc_ah, rfilt);
+
+			/* Set BSSID */
+			memcpy(sc->sc_curbssid, conf->bssid, ETH_ALEN);
+			sc->sc_curaid = 0;
+			ath9k_hw_write_associd(sc->sc_ah, sc->sc_curbssid,
+					       sc->sc_curaid);
+
+			/* Set aggregation protection mode parameters */
+			sc->sc_config.ath_aggr_prot = 0;
+
+			/*
+			 * Reset our TSF so that its value is lower than the
+			 * beacon that we are trying to catch.
+			 * Only then hw will update its TSF register with the
+			 * new beacon. Reset the TSF before setting the BSSID
+			 * to avoid allowing in any frames that would update
+			 * our TSF only to have us clear it
+			 * immediately thereafter.
+			 */
+			ath9k_hw_reset_tsf(sc->sc_ah);
+
+			/* Disable BMISS interrupt when we're not associated */
+			ath9k_hw_set_interrupts(sc->sc_ah,
+					sc->sc_imask &
+					~(ATH9K_INT_SWBA | ATH9K_INT_BMISS));
+			sc->sc_imask &= ~(ATH9K_INT_SWBA | ATH9K_INT_BMISS);
+
+			DPRINTF(sc, ATH_DBG_CONFIG,
+				"%s: RX filter 0x%x bssid %s aid 0x%x\n",
+				__func__, rfilt,
+				print_mac(mac, sc->sc_curbssid), sc->sc_curaid);
+
+			/* need to reconfigure the beacon */
+			sc->sc_beacons = 0;
+
+			break;
+		default:
+			break;
+		}
+	}
+
+	if ((conf->changed & IEEE80211_IFCC_BEACON) &&
+	    (vif->type == IEEE80211_IF_TYPE_IBSS)) {
+		/*
+		 * Allocate and setup the beacon frame.
+		 *
+		 * Stop any previous beacon DMA.  This may be
+		 * necessary, for example, when an ibss merge
+		 * causes reconfiguration; we may be called
+		 * with beacon transmission active.
+		 */
+		ath9k_hw_stoptxdma(sc->sc_ah, sc->sc_bhalq);
+
+		error = ath_beacon_alloc(sc, 0);
+		if (error != 0)
+			return error;
+
+		ath_beacon_sync(sc, 0);
+	}
+
+	/* Check for WLAN_CAPABILITY_PRIVACY ? */
+	if ((avp->av_opmode != IEEE80211_IF_TYPE_STA)) {
+		for (i = 0; i < IEEE80211_WEP_NKID; i++)
+			if (ath9k_hw_keyisvalid(sc->sc_ah, (u16)i))
+				ath9k_hw_keysetmac(sc->sc_ah,
+						   (u16)i,
+						   sc->sc_curbssid);
+	}
+
+	/* Only legacy IBSS for now */
+	if (vif->type == IEEE80211_IF_TYPE_IBSS)
+		ath_update_chainmask(sc, 0);
+
+	return 0;
+}
+
+#define SUPPORTED_FILTERS			\
+	(FIF_PROMISC_IN_BSS |			\
+	FIF_ALLMULTI |				\
+	FIF_CONTROL |				\
+	FIF_OTHER_BSS |				\
+	FIF_BCN_PRBRESP_PROMISC |		\
+	FIF_FCSFAIL)
+
+/* Accept unicast, bcast and mcast frames */
+
+static void ath9k_configure_filter(struct ieee80211_hw *hw,
+				   unsigned int changed_flags,
+				   unsigned int *total_flags,
+				   int mc_count,
+				   struct dev_mc_list *mclist)
+{
+	struct ath_softc *sc = hw->priv;
+
+	changed_flags &= SUPPORTED_FILTERS;
+	*total_flags &= SUPPORTED_FILTERS;
+
+	if (changed_flags & FIF_BCN_PRBRESP_PROMISC) {
+		if (*total_flags & FIF_BCN_PRBRESP_PROMISC)
+			ath_scan_start(sc);
+		else
+			ath_scan_end(sc);
+	}
+}
+
+static void ath9k_sta_notify(struct ieee80211_hw *hw,
+			     struct ieee80211_vif *vif,
+			     enum sta_notify_cmd cmd,
+			     const u8 *addr)
+{
+	struct ath_softc *sc = hw->priv;
+	struct ath_node *an;
+	unsigned long flags;
+	DECLARE_MAC_BUF(mac);
+
+	spin_lock_irqsave(&sc->node_lock, flags);
+	an = ath_node_find(sc, (u8 *) addr);
+	spin_unlock_irqrestore(&sc->node_lock, flags);
+
+	switch (cmd) {
+	case STA_NOTIFY_ADD:
+		spin_lock_irqsave(&sc->node_lock, flags);
+		if (!an) {
+			ath_node_attach(sc, (u8 *)addr, 0);
+			DPRINTF(sc, ATH_DBG_CONFIG, "%s: Attach a node: %s\n",
+				__func__,
+				print_mac(mac, addr));
+		} else {
+			ath_node_get(sc, (u8 *)addr);
+		}
+		spin_unlock_irqrestore(&sc->node_lock, flags);
+		break;
+	case STA_NOTIFY_REMOVE:
+		if (!an)
+			DPRINTF(sc, ATH_DBG_FATAL,
+				"%s: Removal of a non-existent node\n",
+				__func__);
+		else {
+			ath_node_put(sc, an, ATH9K_BH_STATUS_INTACT);
+			DPRINTF(sc, ATH_DBG_CONFIG, "%s: Put a node: %s\n",
+				__func__,
+				print_mac(mac, addr));
+		}
+		break;
+	default:
+		break;
+	}
+}
+
+static int ath9k_conf_tx(struct ieee80211_hw *hw,
+			 u16 queue,
+			 const struct ieee80211_tx_queue_params *params)
+{
+	struct ath_softc *sc = hw->priv;
+	struct ath9k_tx_queue_info qi;
+	int ret = 0, qnum;
+
+	if (queue >= WME_NUM_AC)
+		return 0;
+
+	qi.tqi_aifs = params->aifs;
+	qi.tqi_cwmin = params->cw_min;
+	qi.tqi_cwmax = params->cw_max;
+	qi.tqi_burstTime = params->txop;
+	qnum = ath_get_hal_qnum(queue, sc);
+
+	DPRINTF(sc, ATH_DBG_CONFIG,
+		"%s: Configure tx [queue/halq] [%d/%d],  "
+		"aifs: %d, cw_min: %d, cw_max: %d, txop: %d\n",
+		__func__,
+		queue,
+		qnum,
+		params->aifs,
+		params->cw_min,
+		params->cw_max,
+		params->txop);
+
+	ret = ath_txq_update(sc, qnum, &qi);
+	if (ret)
+		DPRINTF(sc, ATH_DBG_FATAL,
+			"%s: TXQ Update failed\n", __func__);
+
+	return ret;
+}
+
+static int ath9k_set_key(struct ieee80211_hw *hw,
+			 enum set_key_cmd cmd,
+			 const u8 *local_addr,
+			 const u8 *addr,
+			 struct ieee80211_key_conf *key)
+{
+	struct ath_softc *sc = hw->priv;
+	int ret = 0;
+
+	DPRINTF(sc, ATH_DBG_KEYCACHE, " %s: Set HW Key\n", __func__);
+
+	switch (cmd) {
+	case SET_KEY:
+		ret = ath_key_config(sc, addr, key);
+		if (!ret) {
+			set_bit(key->keyidx, sc->sc_keymap);
+			key->hw_key_idx = key->keyidx;
+			/* push IV and Michael MIC generation to stack */
+			key->flags |= IEEE80211_KEY_FLAG_GENERATE_IV;
+			if (key->alg == ALG_TKIP)
+				key->flags |= IEEE80211_KEY_FLAG_GENERATE_MMIC;
+		}
+		break;
+	case DISABLE_KEY:
+		ath_key_delete(sc, key);
+		clear_bit(key->keyidx, sc->sc_keymap);
+		sc->sc_keytype = ATH9K_CIPHER_CLR;
+		break;
+	default:
+		ret = -EINVAL;
+	}
+
+	return ret;
+}
+
+static void ath9k_ht_conf(struct ath_softc *sc,
+			  struct ieee80211_bss_conf *bss_conf)
+{
+#define IEEE80211_HT_CAP_40MHZ_INTOLERANT BIT(14)
+	struct ath_ht_info *ht_info = &sc->sc_ht_info;
+
+	if (bss_conf->assoc_ht) {
+		ht_info->ext_chan_offset =
+			bss_conf->ht_bss_conf->bss_cap &
+				IEEE80211_HT_IE_CHA_SEC_OFFSET;
+
+		if (!(bss_conf->ht_conf->cap &
+			IEEE80211_HT_CAP_40MHZ_INTOLERANT) &&
+			    (bss_conf->ht_bss_conf->bss_cap &
+				IEEE80211_HT_IE_CHA_WIDTH))
+			ht_info->tx_chan_width = ATH9K_HT_MACMODE_2040;
+		else
+			ht_info->tx_chan_width = ATH9K_HT_MACMODE_20;
+
+		ath9k_hw_set11nmac2040(sc->sc_ah, ht_info->tx_chan_width);
+		ht_info->maxampdu = 1 << (IEEE80211_HTCAP_MAXRXAMPDU_FACTOR +
+					bss_conf->ht_conf->ampdu_factor);
+		ht_info->mpdudensity =
+			parse_mpdudensity(bss_conf->ht_conf->ampdu_density);
+
+	}
+
+#undef IEEE80211_HT_CAP_40MHZ_INTOLERANT
+}
+
+static void ath9k_bss_assoc_info(struct ath_softc *sc,
+				 struct ieee80211_bss_conf *bss_conf)
+{
+	struct ieee80211_hw *hw = sc->hw;
+	struct ieee80211_channel *curchan = hw->conf.channel;
+	struct ath_vap *avp;
+	int pos;
+	DECLARE_MAC_BUF(mac);
+
+	if (bss_conf->assoc) {
+		DPRINTF(sc, ATH_DBG_CONFIG, "%s: Bss Info ASSOC %d\n",
+			__func__,
+			bss_conf->aid);
+
+		avp = sc->sc_vaps[0];
+		if (avp == NULL) {
+			DPRINTF(sc, ATH_DBG_FATAL, "%s: Invalid interface\n",
+				__func__);
+			return;
+		}
+
+		/* New association, store aid */
+		if (avp->av_opmode == ATH9K_M_STA) {
+			sc->sc_curaid = bss_conf->aid;
+			ath9k_hw_write_associd(sc->sc_ah, sc->sc_curbssid,
+					       sc->sc_curaid);
+		}
+
+		/* Configure the beacon */
+		ath_beacon_config(sc, 0);
+		sc->sc_beacons = 1;
+
+		/* Reset rssi stats */
+		sc->sc_halstats.ns_avgbrssi = ATH_RSSI_DUMMY_MARKER;
+		sc->sc_halstats.ns_avgrssi = ATH_RSSI_DUMMY_MARKER;
+		sc->sc_halstats.ns_avgtxrssi = ATH_RSSI_DUMMY_MARKER;
+		sc->sc_halstats.ns_avgtxrate = ATH_RATE_DUMMY_MARKER;
+
+		/* Update chainmask */
+		ath_update_chainmask(sc, bss_conf->assoc_ht);
+
+		DPRINTF(sc, ATH_DBG_CONFIG,
+			"%s: bssid %s aid 0x%x\n",
+			__func__,
+			print_mac(mac, sc->sc_curbssid), sc->sc_curaid);
+
+		DPRINTF(sc, ATH_DBG_CONFIG, "%s: Set channel: %d MHz\n",
+			__func__,
+			curchan->center_freq);
+
+		pos = ath_get_channel(sc, curchan);
+		if (pos == -1) {
+			DPRINTF(sc, ATH_DBG_FATAL,
+				"%s: Invalid channel\n", __func__);
+			return;
+		}
+
+		if (hw->conf.ht_conf.ht_supported)
+			sc->sc_ah->ah_channels[pos].chanmode =
+				ath_get_extchanmode(sc, curchan);
+		else
+			sc->sc_ah->ah_channels[pos].chanmode =
+				(curchan->band == IEEE80211_BAND_2GHZ) ?
+				CHANNEL_G : CHANNEL_A;
+
+		/* set h/w channel */
+		if (ath_set_channel(sc, &sc->sc_ah->ah_channels[pos]) < 0)
+			DPRINTF(sc, ATH_DBG_FATAL,
+				"%s: Unable to set channel\n",
+				__func__);
+
+		ath_rate_newstate(sc, avp);
+		/* Update ratectrl about the new state */
+		ath_rc_node_update(hw, avp->rc_node);
+	} else {
+		DPRINTF(sc, ATH_DBG_CONFIG,
+		"%s: Bss Info DISSOC\n", __func__);
+		sc->sc_curaid = 0;
+	}
+}
+
+static void ath9k_bss_info_changed(struct ieee80211_hw *hw,
+				   struct ieee80211_vif *vif,
+				   struct ieee80211_bss_conf *bss_conf,
+				   u32 changed)
+{
+	struct ath_softc *sc = hw->priv;
+
+	if (changed & BSS_CHANGED_ERP_PREAMBLE) {
+		DPRINTF(sc, ATH_DBG_CONFIG, "%s: BSS Changed PREAMBLE %d\n",
+			__func__,
+			bss_conf->use_short_preamble);
+		if (bss_conf->use_short_preamble)
+			sc->sc_flags |= ATH_PREAMBLE_SHORT;
+		else
+			sc->sc_flags &= ~ATH_PREAMBLE_SHORT;
+	}
+
+	if (changed & BSS_CHANGED_ERP_CTS_PROT) {
+		DPRINTF(sc, ATH_DBG_CONFIG, "%s: BSS Changed CTS PROT %d\n",
+			__func__,
+			bss_conf->use_cts_prot);
+		if (bss_conf->use_cts_prot &&
+		    hw->conf.channel->band != IEEE80211_BAND_5GHZ)
+			sc->sc_flags |= ATH_PROTECT_ENABLE;
+		else
+			sc->sc_flags &= ~ATH_PROTECT_ENABLE;
+	}
+
+	if (changed & BSS_CHANGED_HT) {
+		DPRINTF(sc, ATH_DBG_CONFIG, "%s: BSS Changed HT %d\n",
+			__func__,
+			bss_conf->assoc_ht);
+		ath9k_ht_conf(sc, bss_conf);
+	}
+
+	if (changed & BSS_CHANGED_ASSOC) {
+		DPRINTF(sc, ATH_DBG_CONFIG, "%s: BSS Changed ASSOC %d\n",
+			__func__,
+			bss_conf->assoc);
+		ath9k_bss_assoc_info(sc, bss_conf);
+	}
+}
+
+static u64 ath9k_get_tsf(struct ieee80211_hw *hw)
+{
+	u64 tsf;
+	struct ath_softc *sc = hw->priv;
+	struct ath_hal *ah = sc->sc_ah;
+
+	tsf = ath9k_hw_gettsf64(ah);
+
+	return tsf;
+}
+
+static void ath9k_reset_tsf(struct ieee80211_hw *hw)
+{
+	struct ath_softc *sc = hw->priv;
+	struct ath_hal *ah = sc->sc_ah;
+
+	ath9k_hw_reset_tsf(ah);
+}
+
+static int ath9k_ampdu_action(struct ieee80211_hw *hw,
+		       enum ieee80211_ampdu_mlme_action action,
+		       const u8 *addr,
+		       u16 tid,
+		       u16 *ssn)
+{
+	struct ath_softc *sc = hw->priv;
+	int ret = 0;
+
+	switch (action) {
+	case IEEE80211_AMPDU_RX_START:
+		ret = ath_rx_aggr_start(sc, addr, tid, ssn);
+		if (ret < 0)
+			DPRINTF(sc, ATH_DBG_FATAL,
+				"%s: Unable to start RX aggregation\n",
+				__func__);
+		break;
+	case IEEE80211_AMPDU_RX_STOP:
+		ret = ath_rx_aggr_stop(sc, addr, tid);
+		if (ret < 0)
+			DPRINTF(sc, ATH_DBG_FATAL,
+				"%s: Unable to stop RX aggregation\n",
+				__func__);
+		break;
+	case IEEE80211_AMPDU_TX_START:
+		ret = ath_tx_aggr_start(sc, addr, tid, ssn);
+		if (ret < 0)
+			DPRINTF(sc, ATH_DBG_FATAL,
+				"%s: Unable to start TX aggregation\n",
+				__func__);
+		else
+			ieee80211_start_tx_ba_cb_irqsafe(hw, (u8 *)addr, tid);
+		break;
+	case IEEE80211_AMPDU_TX_STOP:
+		ret = ath_tx_aggr_stop(sc, addr, tid);
+		if (ret < 0)
+			DPRINTF(sc, ATH_DBG_FATAL,
+				"%s: Unable to stop TX aggregation\n",
+				__func__);
+
+		ieee80211_stop_tx_ba_cb_irqsafe(hw, (u8 *)addr, tid);
+		break;
+	default:
+		DPRINTF(sc, ATH_DBG_FATAL,
+			"%s: Unknown AMPDU action\n", __func__);
+	}
+
+	return ret;
+}
+
+static struct ieee80211_ops ath9k_ops = {
+	.tx 		    = ath9k_tx,
+	.start 		    = ath9k_start,
+	.stop 		    = ath9k_stop,
+	.add_interface 	    = ath9k_add_interface,
+	.remove_interface   = ath9k_remove_interface,
+	.config 	    = ath9k_config,
+	.config_interface   = ath9k_config_interface,
+	.configure_filter   = ath9k_configure_filter,
+	.get_stats          = NULL,
+	.sta_notify         = ath9k_sta_notify,
+	.conf_tx 	    = ath9k_conf_tx,
+	.get_tx_stats 	    = NULL,
+	.bss_info_changed   = ath9k_bss_info_changed,
+	.set_tim            = NULL,
+	.set_key            = ath9k_set_key,
+	.hw_scan            = NULL,
+	.get_tkip_seq       = NULL,
+	.set_rts_threshold  = NULL,
+	.set_frag_threshold = NULL,
+	.set_retry_limit    = NULL,
+	.get_tsf 	    = ath9k_get_tsf,
+	.reset_tsf 	    = ath9k_reset_tsf,
+	.tx_last_beacon     = NULL,
+	.ampdu_action       = ath9k_ampdu_action
+};
+
+void ath_get_beaconconfig(struct ath_softc *sc,
+			  int if_id,
+			  struct ath_beacon_config *conf)
+{
+	struct ieee80211_hw *hw = sc->hw;
+
+	/* fill in beacon config data */
+
+	conf->beacon_interval = hw->conf.beacon_int;
+	conf->listen_interval = 100;
+	conf->dtim_count = 1;
+	conf->bmiss_timeout = ATH_DEFAULT_BMISS_LIMIT * conf->listen_interval;
+}
+
+int ath_update_beacon(struct ath_softc *sc,
+		      int if_id,
+		      struct ath_beacon_offset *bo,
+		      struct sk_buff *skb,
+		      int mcast)
+{
+	return 0;
+}
+
+void ath_tx_complete(struct ath_softc *sc, struct sk_buff *skb,
+		     struct ath_xmit_status *tx_status, struct ath_node *an)
+{
+	struct ieee80211_hw *hw = sc->hw;
+	struct ieee80211_tx_info *tx_info = IEEE80211_SKB_CB(skb);
+
+	DPRINTF(sc, ATH_DBG_XMIT,
+		"%s: TX complete: skb: %p\n", __func__, skb);
+
+	if (tx_info->flags & IEEE80211_TX_CTL_NO_ACK ||
+		tx_info->flags & IEEE80211_TX_STAT_TX_FILTERED) {
+		/* free driver's private data area of tx_info */
+		if (tx_info->driver_data[0] != NULL)
+			kfree(tx_info->driver_data[0]);
+			tx_info->driver_data[0] = NULL;
+	}
+
+	if (tx_status->flags & ATH_TX_BAR) {
+		tx_info->flags |= IEEE80211_TX_STAT_AMPDU_NO_BACK;
+		tx_status->flags &= ~ATH_TX_BAR;
+	}
+
+	if (tx_status->flags & (ATH_TX_ERROR | ATH_TX_XRETRY)) {
+		if (!(tx_info->flags & IEEE80211_TX_CTL_NO_ACK)) {
+			/* Frame was not ACKed, but an ACK was expected */
+			tx_info->status.excessive_retries = 1;
+		}
+	} else {
+		/* Frame was ACKed */
+		tx_info->flags |= IEEE80211_TX_STAT_ACK;
+	}
+
+	tx_info->status.retry_count = tx_status->retries;
+
+	ieee80211_tx_status(hw, skb);
+	if (an)
+		ath_node_put(sc, an, ATH9K_BH_STATUS_CHANGE);
+}
+
+int ath__rx_indicate(struct ath_softc *sc,
+		     struct sk_buff *skb,
+		     struct ath_recv_status *status,
+		     u16 keyix)
+{
+	struct ieee80211_hw *hw = sc->hw;
+	struct ath_node *an = NULL;
+	struct ieee80211_rx_status rx_status;
+	struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) skb->data;
+	int hdrlen = ieee80211_get_hdrlen_from_skb(skb);
+	int padsize;
+	enum ATH_RX_TYPE st;
+
+	/* see if any padding is done by the hw and remove it */
+	if (hdrlen & 3) {
+		padsize = hdrlen % 4;
+		memmove(skb->data + padsize, skb->data, hdrlen);
+		skb_pull(skb, padsize);
+	}
+
+	/* remove FCS before passing up to protocol stack */
+	skb_trim(skb, (skb->len - FCS_LEN));
+
+	/* Prepare rx status */
+	ath9k_rx_prepare(sc, skb, status, &rx_status);
+
+	if (!(keyix == ATH9K_RXKEYIX_INVALID) &&
+	    !(status->flags & ATH_RX_DECRYPT_ERROR)) {
+		rx_status.flag |= RX_FLAG_DECRYPTED;
+	} else if ((le16_to_cpu(hdr->frame_control) & IEEE80211_FCTL_PROTECTED)
+		   && !(status->flags & ATH_RX_DECRYPT_ERROR)
+		   && skb->len >= hdrlen + 4) {
+		keyix = skb->data[hdrlen + 3] >> 6;
+
+		if (test_bit(keyix, sc->sc_keymap))
+			rx_status.flag |= RX_FLAG_DECRYPTED;
+	}
+
+	spin_lock_bh(&sc->node_lock);
+	an = ath_node_find(sc, hdr->addr2);
+	spin_unlock_bh(&sc->node_lock);
+
+	if (an) {
+		ath_rx_input(sc, an,
+			     hw->conf.ht_conf.ht_supported,
+			     skb, status, &st);
+	}
+	if (!an || (st != ATH_RX_CONSUMED))
+		__ieee80211_rx(hw, skb, &rx_status);
+
+	return 0;
+}
+
+int ath_rx_subframe(struct ath_node *an,
+		    struct sk_buff *skb,
+		    struct ath_recv_status *status)
+{
+	struct ath_softc *sc = an->an_sc;
+	struct ieee80211_hw *hw = sc->hw;
+	struct ieee80211_rx_status rx_status;
+
+	/* Prepare rx status */
+	ath9k_rx_prepare(sc, skb, status, &rx_status);
+	if (!(status->flags & ATH_RX_DECRYPT_ERROR))
+		rx_status.flag |= RX_FLAG_DECRYPTED;
+
+	__ieee80211_rx(hw, skb, &rx_status);
+
+	return 0;
+}
+
+enum ath9k_ht_macmode ath_cwm_macmode(struct ath_softc *sc)
+{
+	return sc->sc_ht_info.tx_chan_width;
+}
+
+static int ath_detach(struct ath_softc *sc)
+{
+	struct ieee80211_hw *hw = sc->hw;
+
+	DPRINTF(sc, ATH_DBG_CONFIG, "%s: Detach ATH hw\n", __func__);
+
+	/* Unregister hw */
+
+	ieee80211_unregister_hw(hw);
+
+	/* unregister Rate control */
+	ath_rate_control_unregister();
+
+	/* tx/rx cleanup */
+
+	ath_rx_cleanup(sc);
+	ath_tx_cleanup(sc);
+
+	/* Deinit */
+
+	ath_deinit(sc);
+
+	return 0;
+}
+
+static int ath_attach(u16 devid,
+		      struct ath_softc *sc)
+{
+	struct ieee80211_hw *hw = sc->hw;
+	int error = 0;
+
+	DPRINTF(sc, ATH_DBG_CONFIG, "%s: Attach ATH hw\n", __func__);
+
+	error = ath_init(devid, sc);
+	if (error != 0)
+		return error;
+
+	/* Init nodes */
+
+	INIT_LIST_HEAD(&sc->node_list);
+	spin_lock_init(&sc->node_lock);
+
+	/* get mac address from hardware and set in mac80211 */
+
+	SET_IEEE80211_PERM_ADDR(hw, sc->sc_myaddr);
+
+	/* setup channels and rates */
+
+	sc->sbands[IEEE80211_BAND_2GHZ].channels =
+		sc->channels[IEEE80211_BAND_2GHZ];
+	sc->sbands[IEEE80211_BAND_2GHZ].bitrates =
+		sc->rates[IEEE80211_BAND_2GHZ];
+	sc->sbands[IEEE80211_BAND_2GHZ].band = IEEE80211_BAND_2GHZ;
+
+	if (sc->sc_ah->ah_caps.hw_caps & ATH9K_HW_CAP_HT)
+		/* Setup HT capabilities for 2.4Ghz*/
+		setup_ht_cap(&sc->sbands[IEEE80211_BAND_2GHZ].ht_info);
+
+	hw->wiphy->bands[IEEE80211_BAND_2GHZ] =
+		&sc->sbands[IEEE80211_BAND_2GHZ];
+
+	if (test_bit(ATH9K_MODE_11A, sc->sc_ah->ah_caps.wireless_modes)) {
+		sc->sbands[IEEE80211_BAND_5GHZ].channels =
+			sc->channels[IEEE80211_BAND_5GHZ];
+		sc->sbands[IEEE80211_BAND_5GHZ].bitrates =
+			sc->rates[IEEE80211_BAND_5GHZ];
+		sc->sbands[IEEE80211_BAND_5GHZ].band =
+			IEEE80211_BAND_5GHZ;
+
+		if (sc->sc_ah->ah_caps.hw_caps & ATH9K_HW_CAP_HT)
+			/* Setup HT capabilities for 5Ghz*/
+			setup_ht_cap(&sc->sbands[IEEE80211_BAND_5GHZ].ht_info);
+
+		hw->wiphy->bands[IEEE80211_BAND_5GHZ] =
+			&sc->sbands[IEEE80211_BAND_5GHZ];
+	}
+
+	/* FIXME: Have to figure out proper hw init values later */
+
+	hw->queues = 4;
+	hw->ampdu_queues = 1;
+
+	/* Register rate control */
+	hw->rate_control_algorithm = "ath9k_rate_control";
+	error = ath_rate_control_register();
+	if (error != 0) {
+		DPRINTF(sc, ATH_DBG_FATAL,
+			"%s: Unable to register rate control "
+			"algorithm:%d\n", __func__, error);
+		ath_rate_control_unregister();
+		goto bad;
+	}
+
+	error = ieee80211_register_hw(hw);
+	if (error != 0) {
+		ath_rate_control_unregister();
+		goto bad;
+	}
+
+	/* initialize tx/rx engine */
+
+	error = ath_tx_init(sc, ATH_TXBUF);
+	if (error != 0)
+		goto bad1;
+
+	error = ath_rx_init(sc, ATH_RXBUF);
+	if (error != 0)
+		goto bad1;
+
+	return 0;
+bad1:
+	ath_detach(sc);
+bad:
+	return error;
+}
+
+static int ath_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id)
+{
+	void __iomem *mem;
+	struct ath_softc *sc;
+	struct ieee80211_hw *hw;
+	const char *athname;
+	u8 csz;
+	u32 val;
+	int ret = 0;
+
+	if (pci_enable_device(pdev))
+		return -EIO;
+
+	/* XXX 32-bit addressing only */
+	if (pci_set_dma_mask(pdev, 0xffffffff)) {
+		printk(KERN_ERR "ath_pci: 32-bit DMA not available\n");
+		ret = -ENODEV;
+		goto bad;
+	}
+
+	/*
+	 * Cache line size is used to size and align various
+	 * structures used to communicate with the hardware.
+	 */
+	pci_read_config_byte(pdev, PCI_CACHE_LINE_SIZE, &csz);
+	if (csz == 0) {
+		/*
+		 * Linux 2.4.18 (at least) writes the cache line size
+		 * register as a 16-bit wide register which is wrong.
+		 * We must have this setup properly for rx buffer
+		 * DMA to work so force a reasonable value here if it
+		 * comes up zero.
+		 */
+		csz = L1_CACHE_BYTES / sizeof(u32);
+		pci_write_config_byte(pdev, PCI_CACHE_LINE_SIZE, csz);
+	}
+	/*
+	 * The default setting of latency timer yields poor results,
+	 * set it to the value used by other systems. It may be worth
+	 * tweaking this setting more.
+	 */
+	pci_write_config_byte(pdev, PCI_LATENCY_TIMER, 0xa8);
+
+	pci_set_master(pdev);
+
+	/*
+	 * Disable the RETRY_TIMEOUT register (0x41) to keep
+	 * PCI Tx retries from interfering with C3 CPU state.
+	 */
+	pci_read_config_dword(pdev, 0x40, &val);
+	if ((val & 0x0000ff00) != 0)
+		pci_write_config_dword(pdev, 0x40, val & 0xffff00ff);
+
+	ret = pci_request_region(pdev, 0, "ath9k");
+	if (ret) {
+		dev_err(&pdev->dev, "PCI memory region reserve error\n");
+		ret = -ENODEV;
+		goto bad;
+	}
+
+	mem = pci_iomap(pdev, 0, 0);
+	if (!mem) {
+		printk(KERN_ERR "PCI memory map error\n") ;
+		ret = -EIO;
+		goto bad1;
+	}
+
+	hw = ieee80211_alloc_hw(sizeof(struct ath_softc), &ath9k_ops);
+	if (hw == NULL) {
+		printk(KERN_ERR "ath_pci: no memory for ieee80211_hw\n");
+		goto bad2;
+	}
+
+	hw->flags = IEEE80211_HW_SIGNAL_DBM |
+		IEEE80211_HW_NOISE_DBM;
+
+	SET_IEEE80211_DEV(hw, &pdev->dev);
+	pci_set_drvdata(pdev, hw);
+
+	sc = hw->priv;
+	sc->hw = hw;
+	sc->pdev = pdev;
+	sc->mem = mem;
+
+	if (ath_attach(id->device, sc) != 0) {
+		ret = -ENODEV;
+		goto bad3;
+	}
+
+	/* setup interrupt service routine */
+
+	if (request_irq(pdev->irq, ath_isr, IRQF_SHARED, "ath", sc)) {
+		printk(KERN_ERR "%s: request_irq failed\n",
+			wiphy_name(hw->wiphy));
+		ret = -EIO;
+		goto bad4;
+	}
+
+	athname = ath9k_hw_probe(id->vendor, id->device);
+
+	printk(KERN_INFO "%s: %s: mem=0x%lx, irq=%d\n",
+	       wiphy_name(hw->wiphy),
+	       athname ? athname : "Atheros ???",
+	       (unsigned long)mem, pdev->irq);
+
+	return 0;
+bad4:
+	ath_detach(sc);
+bad3:
+	ieee80211_free_hw(hw);
+bad2:
+	pci_iounmap(pdev, mem);
+bad1:
+	pci_release_region(pdev, 0);
+bad:
+	pci_disable_device(pdev);
+	return ret;
+}
+
+static void ath_pci_remove(struct pci_dev *pdev)
+{
+	struct ieee80211_hw *hw = pci_get_drvdata(pdev);
+	struct ath_softc *sc = hw->priv;
+
+	if (pdev->irq)
+		free_irq(pdev->irq, sc);
+	ath_detach(sc);
+	pci_iounmap(pdev, sc->mem);
+	pci_release_region(pdev, 0);
+	pci_disable_device(pdev);
+	ieee80211_free_hw(hw);
+}
+
+#ifdef CONFIG_PM
+
+static int ath_pci_suspend(struct pci_dev *pdev, pm_message_t state)
+{
+	pci_save_state(pdev);
+	pci_disable_device(pdev);
+	pci_set_power_state(pdev, 3);
+
+	return 0;
+}
+
+static int ath_pci_resume(struct pci_dev *pdev)
+{
+	u32 val;
+	int err;
+
+	err = pci_enable_device(pdev);
+	if (err)
+		return err;
+	pci_restore_state(pdev);
+	/*
+	 * Suspend/Resume resets the PCI configuration space, so we have to
+	 * re-disable the RETRY_TIMEOUT register (0x41) to keep
+	 * PCI Tx retries from interfering with C3 CPU state
+	 */
+	pci_read_config_dword(pdev, 0x40, &val);
+	if ((val & 0x0000ff00) != 0)
+		pci_write_config_dword(pdev, 0x40, val & 0xffff00ff);
+
+	return 0;
+}
+
+#endif /* CONFIG_PM */
+
+MODULE_DEVICE_TABLE(pci, ath_pci_id_table);
+
+static struct pci_driver ath_pci_driver = {
+	.name       = "ath9k",
+	.id_table   = ath_pci_id_table,
+	.probe      = ath_pci_probe,
+	.remove     = ath_pci_remove,
+#ifdef CONFIG_PM
+	.suspend    = ath_pci_suspend,
+	.resume     = ath_pci_resume,
+#endif /* CONFIG_PM */
+};
+
+static int __init init_ath_pci(void)
+{
+	printk(KERN_INFO "%s: %s\n", dev_info, ATH_PCI_VERSION);
+
+	if (pci_register_driver(&ath_pci_driver) < 0) {
+		printk(KERN_ERR
+			"ath_pci: No devices found, driver not installed.\n");
+		pci_unregister_driver(&ath_pci_driver);
+		return -ENODEV;
+	}
+
+	return 0;
+}
+module_init(init_ath_pci);
+
+static void __exit exit_ath_pci(void)
+{
+	pci_unregister_driver(&ath_pci_driver);
+	printk(KERN_INFO "%s: driver unloaded\n", dev_info);
+}
+module_exit(exit_ath_pci);
diff --git a/drivers/net/wireless/ath9k/phy.c b/drivers/net/wireless/ath9k/phy.c
new file mode 100644
index 000000000000..eb9121fdfd38
--- /dev/null
+++ b/drivers/net/wireless/ath9k/phy.c
@@ -0,0 +1,436 @@
+/*
+ * Copyright (c) 2008 Atheros Communications Inc.
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#include "core.h"
+#include "hw.h"
+#include "reg.h"
+#include "phy.h"
+
+void
+ath9k_hw_write_regs(struct ath_hal *ah, u32 modesIndex, u32 freqIndex,
+		    int regWrites)
+{
+	struct ath_hal_5416 *ahp = AH5416(ah);
+
+	REG_WRITE_ARRAY(&ahp->ah_iniBB_RfGain, freqIndex, regWrites);
+}
+
+bool
+ath9k_hw_set_channel(struct ath_hal *ah, struct ath9k_channel *chan)
+{
+	u32 channelSel = 0;
+	u32 bModeSynth = 0;
+	u32 aModeRefSel = 0;
+	u32 reg32 = 0;
+	u16 freq;
+	struct chan_centers centers;
+
+	ath9k_hw_get_channel_centers(ah, chan, &centers);
+	freq = centers.synth_center;
+
+	if (freq < 4800) {
+		u32 txctl;
+
+		if (((freq - 2192) % 5) == 0) {
+			channelSel = ((freq - 672) * 2 - 3040) / 10;
+			bModeSynth = 0;
+		} else if (((freq - 2224) % 5) == 0) {
+			channelSel = ((freq - 704) * 2 - 3040) / 10;
+			bModeSynth = 1;
+		} else {
+			DPRINTF(ah->ah_sc, ATH_DBG_CHANNEL,
+				 "%s: invalid channel %u MHz\n", __func__,
+				 freq);
+			return false;
+		}
+
+		channelSel = (channelSel << 2) & 0xff;
+		channelSel = ath9k_hw_reverse_bits(channelSel, 8);
+
+		txctl = REG_READ(ah, AR_PHY_CCK_TX_CTRL);
+		if (freq == 2484) {
+
+			REG_WRITE(ah, AR_PHY_CCK_TX_CTRL,
+				  txctl | AR_PHY_CCK_TX_CTRL_JAPAN);
+		} else {
+			REG_WRITE(ah, AR_PHY_CCK_TX_CTRL,
+				  txctl & ~AR_PHY_CCK_TX_CTRL_JAPAN);
+		}
+
+	} else if ((freq % 20) == 0 && freq >= 5120) {
+		channelSel =
+		    ath9k_hw_reverse_bits(((freq - 4800) / 20 << 2), 8);
+		aModeRefSel = ath9k_hw_reverse_bits(1, 2);
+	} else if ((freq % 10) == 0) {
+		channelSel =
+		    ath9k_hw_reverse_bits(((freq - 4800) / 10 << 1), 8);
+		if (AR_SREV_9100(ah) || AR_SREV_9160_10_OR_LATER(ah))
+			aModeRefSel = ath9k_hw_reverse_bits(2, 2);
+		else
+			aModeRefSel = ath9k_hw_reverse_bits(1, 2);
+	} else if ((freq % 5) == 0) {
+		channelSel = ath9k_hw_reverse_bits((freq - 4800) / 5, 8);
+		aModeRefSel = ath9k_hw_reverse_bits(1, 2);
+	} else {
+		DPRINTF(ah->ah_sc, ATH_DBG_CHANNEL,
+			 "%s: invalid channel %u MHz\n", __func__, freq);
+		return false;
+	}
+
+	reg32 =
+	    (channelSel << 8) | (aModeRefSel << 2) | (bModeSynth << 1) |
+	    (1 << 5) | 0x1;
+
+	REG_WRITE(ah, AR_PHY(0x37), reg32);
+
+	ah->ah_curchan = chan;
+
+	AH5416(ah)->ah_curchanRadIndex = -1;
+
+	return true;
+}
+
+bool
+ath9k_hw_ar9280_set_channel(struct ath_hal *ah,
+			    struct ath9k_channel *chan)
+{
+	u16 bMode, fracMode, aModeRefSel = 0;
+	u32 freq, ndiv, channelSel = 0, channelFrac = 0, reg32 = 0;
+	struct chan_centers centers;
+	u32 refDivA = 24;
+
+	ath9k_hw_get_channel_centers(ah, chan, &centers);
+	freq = centers.synth_center;
+
+	reg32 = REG_READ(ah, AR_PHY_SYNTH_CONTROL);
+	reg32 &= 0xc0000000;
+
+	if (freq < 4800) {
+		u32 txctl;
+
+		bMode = 1;
+		fracMode = 1;
+		aModeRefSel = 0;
+		channelSel = (freq * 0x10000) / 15;
+
+		txctl = REG_READ(ah, AR_PHY_CCK_TX_CTRL);
+		if (freq == 2484) {
+
+			REG_WRITE(ah, AR_PHY_CCK_TX_CTRL,
+				  txctl | AR_PHY_CCK_TX_CTRL_JAPAN);
+		} else {
+			REG_WRITE(ah, AR_PHY_CCK_TX_CTRL,
+				  txctl & ~AR_PHY_CCK_TX_CTRL_JAPAN);
+		}
+	} else {
+		bMode = 0;
+		fracMode = 0;
+
+		if ((freq % 20) == 0) {
+			aModeRefSel = 3;
+		} else if ((freq % 10) == 0) {
+			aModeRefSel = 2;
+		} else {
+			aModeRefSel = 0;
+
+			fracMode = 1;
+			refDivA = 1;
+			channelSel = (freq * 0x8000) / 15;
+
+			REG_RMW_FIELD(ah, AR_AN_SYNTH9,
+				      AR_AN_SYNTH9_REFDIVA, refDivA);
+		}
+		if (!fracMode) {
+			ndiv = (freq * (refDivA >> aModeRefSel)) / 60;
+			channelSel = ndiv & 0x1ff;
+			channelFrac = (ndiv & 0xfffffe00) * 2;
+			channelSel = (channelSel << 17) | channelFrac;
+		}
+	}
+
+	reg32 = reg32 |
+	    (bMode << 29) |
+	    (fracMode << 28) | (aModeRefSel << 26) | (channelSel);
+
+	REG_WRITE(ah, AR_PHY_SYNTH_CONTROL, reg32);
+
+	ah->ah_curchan = chan;
+
+	AH5416(ah)->ah_curchanRadIndex = -1;
+
+	return true;
+}
+
+static void
+ath9k_phy_modify_rx_buffer(u32 *rfBuf, u32 reg32,
+			   u32 numBits, u32 firstBit,
+			   u32 column)
+{
+	u32 tmp32, mask, arrayEntry, lastBit;
+	int32_t bitPosition, bitsLeft;
+
+	tmp32 = ath9k_hw_reverse_bits(reg32, numBits);
+	arrayEntry = (firstBit - 1) / 8;
+	bitPosition = (firstBit - 1) % 8;
+	bitsLeft = numBits;
+	while (bitsLeft > 0) {
+		lastBit = (bitPosition + bitsLeft > 8) ?
+		    8 : bitPosition + bitsLeft;
+		mask = (((1 << lastBit) - 1) ^ ((1 << bitPosition) - 1)) <<
+		    (column * 8);
+		rfBuf[arrayEntry] &= ~mask;
+		rfBuf[arrayEntry] |= ((tmp32 << bitPosition) <<
+				      (column * 8)) & mask;
+		bitsLeft -= 8 - bitPosition;
+		tmp32 = tmp32 >> (8 - bitPosition);
+		bitPosition = 0;
+		arrayEntry++;
+	}
+}
+
+bool
+ath9k_hw_set_rf_regs(struct ath_hal *ah, struct ath9k_channel *chan,
+		     u16 modesIndex)
+{
+	struct ath_hal_5416 *ahp = AH5416(ah);
+
+	u32 eepMinorRev;
+	u32 ob5GHz = 0, db5GHz = 0;
+	u32 ob2GHz = 0, db2GHz = 0;
+	int regWrites = 0;
+
+	if (AR_SREV_9280_10_OR_LATER(ah))
+		return true;
+
+	eepMinorRev = ath9k_hw_get_eeprom(ahp, EEP_MINOR_REV);
+
+	RF_BANK_SETUP(ahp->ah_analogBank0Data, &ahp->ah_iniBank0, 1);
+
+	RF_BANK_SETUP(ahp->ah_analogBank1Data, &ahp->ah_iniBank1, 1);
+
+	RF_BANK_SETUP(ahp->ah_analogBank2Data, &ahp->ah_iniBank2, 1);
+
+	RF_BANK_SETUP(ahp->ah_analogBank3Data, &ahp->ah_iniBank3,
+		      modesIndex);
+	{
+		int i;
+		for (i = 0; i < ahp->ah_iniBank6TPC.ia_rows; i++) {
+			ahp->ah_analogBank6Data[i] =
+			    INI_RA(&ahp->ah_iniBank6TPC, i, modesIndex);
+		}
+	}
+
+	if (eepMinorRev >= 2) {
+		if (IS_CHAN_2GHZ(chan)) {
+			ob2GHz = ath9k_hw_get_eeprom(ahp, EEP_OB_2);
+			db2GHz = ath9k_hw_get_eeprom(ahp, EEP_DB_2);
+			ath9k_phy_modify_rx_buffer(ahp->ah_analogBank6Data,
+						   ob2GHz, 3, 197, 0);
+			ath9k_phy_modify_rx_buffer(ahp->ah_analogBank6Data,
+						   db2GHz, 3, 194, 0);
+		} else {
+			ob5GHz = ath9k_hw_get_eeprom(ahp, EEP_OB_5);
+			db5GHz = ath9k_hw_get_eeprom(ahp, EEP_DB_5);
+			ath9k_phy_modify_rx_buffer(ahp->ah_analogBank6Data,
+						   ob5GHz, 3, 203, 0);
+			ath9k_phy_modify_rx_buffer(ahp->ah_analogBank6Data,
+						   db5GHz, 3, 200, 0);
+		}
+	}
+
+	RF_BANK_SETUP(ahp->ah_analogBank7Data, &ahp->ah_iniBank7, 1);
+
+	REG_WRITE_RF_ARRAY(&ahp->ah_iniBank0, ahp->ah_analogBank0Data,
+			   regWrites);
+	REG_WRITE_RF_ARRAY(&ahp->ah_iniBank1, ahp->ah_analogBank1Data,
+			   regWrites);
+	REG_WRITE_RF_ARRAY(&ahp->ah_iniBank2, ahp->ah_analogBank2Data,
+			   regWrites);
+	REG_WRITE_RF_ARRAY(&ahp->ah_iniBank3, ahp->ah_analogBank3Data,
+			   regWrites);
+	REG_WRITE_RF_ARRAY(&ahp->ah_iniBank6TPC, ahp->ah_analogBank6Data,
+			   regWrites);
+	REG_WRITE_RF_ARRAY(&ahp->ah_iniBank7, ahp->ah_analogBank7Data,
+			   regWrites);
+
+	return true;
+}
+
+void
+ath9k_hw_rfdetach(struct ath_hal *ah)
+{
+	struct ath_hal_5416 *ahp = AH5416(ah);
+
+	if (ahp->ah_analogBank0Data != NULL) {
+		kfree(ahp->ah_analogBank0Data);
+		ahp->ah_analogBank0Data = NULL;
+	}
+	if (ahp->ah_analogBank1Data != NULL) {
+		kfree(ahp->ah_analogBank1Data);
+		ahp->ah_analogBank1Data = NULL;
+	}
+	if (ahp->ah_analogBank2Data != NULL) {
+		kfree(ahp->ah_analogBank2Data);
+		ahp->ah_analogBank2Data = NULL;
+	}
+	if (ahp->ah_analogBank3Data != NULL) {
+		kfree(ahp->ah_analogBank3Data);
+		ahp->ah_analogBank3Data = NULL;
+	}
+	if (ahp->ah_analogBank6Data != NULL) {
+		kfree(ahp->ah_analogBank6Data);
+		ahp->ah_analogBank6Data = NULL;
+	}
+	if (ahp->ah_analogBank6TPCData != NULL) {
+		kfree(ahp->ah_analogBank6TPCData);
+		ahp->ah_analogBank6TPCData = NULL;
+	}
+	if (ahp->ah_analogBank7Data != NULL) {
+		kfree(ahp->ah_analogBank7Data);
+		ahp->ah_analogBank7Data = NULL;
+	}
+	if (ahp->ah_addac5416_21 != NULL) {
+		kfree(ahp->ah_addac5416_21);
+		ahp->ah_addac5416_21 = NULL;
+	}
+	if (ahp->ah_bank6Temp != NULL) {
+		kfree(ahp->ah_bank6Temp);
+		ahp->ah_bank6Temp = NULL;
+	}
+}
+
+bool ath9k_hw_init_rf(struct ath_hal *ah, int *status)
+{
+	struct ath_hal_5416 *ahp = AH5416(ah);
+
+	if (!AR_SREV_9280_10_OR_LATER(ah)) {
+
+		ahp->ah_analogBank0Data =
+		    kzalloc((sizeof(u32) *
+			     ahp->ah_iniBank0.ia_rows), GFP_KERNEL);
+		ahp->ah_analogBank1Data =
+		    kzalloc((sizeof(u32) *
+			     ahp->ah_iniBank1.ia_rows), GFP_KERNEL);
+		ahp->ah_analogBank2Data =
+		    kzalloc((sizeof(u32) *
+			     ahp->ah_iniBank2.ia_rows), GFP_KERNEL);
+		ahp->ah_analogBank3Data =
+		    kzalloc((sizeof(u32) *
+			     ahp->ah_iniBank3.ia_rows), GFP_KERNEL);
+		ahp->ah_analogBank6Data =
+		    kzalloc((sizeof(u32) *
+			     ahp->ah_iniBank6.ia_rows), GFP_KERNEL);
+		ahp->ah_analogBank6TPCData =
+		    kzalloc((sizeof(u32) *
+			     ahp->ah_iniBank6TPC.ia_rows), GFP_KERNEL);
+		ahp->ah_analogBank7Data =
+		    kzalloc((sizeof(u32) *
+			     ahp->ah_iniBank7.ia_rows), GFP_KERNEL);
+
+		if (ahp->ah_analogBank0Data == NULL
+		    || ahp->ah_analogBank1Data == NULL
+		    || ahp->ah_analogBank2Data == NULL
+		    || ahp->ah_analogBank3Data == NULL
+		    || ahp->ah_analogBank6Data == NULL
+		    || ahp->ah_analogBank6TPCData == NULL
+		    || ahp->ah_analogBank7Data == NULL) {
+			DPRINTF(ah->ah_sc, ATH_DBG_FATAL,
+				 "%s: cannot allocate RF banks\n",
+				 __func__);
+			*status = -ENOMEM;
+			return false;
+		}
+
+		ahp->ah_addac5416_21 =
+		    kzalloc((sizeof(u32) *
+			     ahp->ah_iniAddac.ia_rows *
+			     ahp->ah_iniAddac.ia_columns), GFP_KERNEL);
+		if (ahp->ah_addac5416_21 == NULL) {
+			DPRINTF(ah->ah_sc, ATH_DBG_FATAL,
+				 "%s: cannot allocate ah_addac5416_21\n",
+				 __func__);
+			*status = -ENOMEM;
+			return false;
+		}
+
+		ahp->ah_bank6Temp =
+		    kzalloc((sizeof(u32) *
+			     ahp->ah_iniBank6.ia_rows), GFP_KERNEL);
+		if (ahp->ah_bank6Temp == NULL) {
+			DPRINTF(ah->ah_sc, ATH_DBG_FATAL,
+				 "%s: cannot allocate ah_bank6Temp\n",
+				 __func__);
+			*status = -ENOMEM;
+			return false;
+		}
+	}
+
+	return true;
+}
+
+void
+ath9k_hw_decrease_chain_power(struct ath_hal *ah, struct ath9k_channel *chan)
+{
+	int i, regWrites = 0;
+	struct ath_hal_5416 *ahp = AH5416(ah);
+	u32 bank6SelMask;
+	u32 *bank6Temp = ahp->ah_bank6Temp;
+
+	switch (ahp->ah_diversityControl) {
+	case ATH9K_ANT_FIXED_A:
+		bank6SelMask =
+		    (ahp->
+		     ah_antennaSwitchSwap & ANTSWAP_AB) ? REDUCE_CHAIN_0 :
+		    REDUCE_CHAIN_1;
+		break;
+	case ATH9K_ANT_FIXED_B:
+		bank6SelMask =
+		    (ahp->
+		     ah_antennaSwitchSwap & ANTSWAP_AB) ? REDUCE_CHAIN_1 :
+		    REDUCE_CHAIN_0;
+		break;
+	case ATH9K_ANT_VARIABLE:
+		return;
+		break;
+	default:
+		return;
+		break;
+	}
+
+	for (i = 0; i < ahp->ah_iniBank6.ia_rows; i++)
+		bank6Temp[i] = ahp->ah_analogBank6Data[i];
+
+	REG_WRITE(ah, AR_PHY_BASE + 0xD8, bank6SelMask);
+
+	ath9k_phy_modify_rx_buffer(bank6Temp, 1, 1, 189, 0);
+	ath9k_phy_modify_rx_buffer(bank6Temp, 1, 1, 190, 0);
+	ath9k_phy_modify_rx_buffer(bank6Temp, 1, 1, 191, 0);
+	ath9k_phy_modify_rx_buffer(bank6Temp, 1, 1, 192, 0);
+	ath9k_phy_modify_rx_buffer(bank6Temp, 1, 1, 193, 0);
+	ath9k_phy_modify_rx_buffer(bank6Temp, 1, 1, 222, 0);
+	ath9k_phy_modify_rx_buffer(bank6Temp, 1, 1, 245, 0);
+	ath9k_phy_modify_rx_buffer(bank6Temp, 1, 1, 246, 0);
+	ath9k_phy_modify_rx_buffer(bank6Temp, 1, 1, 247, 0);
+
+	REG_WRITE_RF_ARRAY(&ahp->ah_iniBank6, bank6Temp, regWrites);
+
+	REG_WRITE(ah, AR_PHY_BASE + 0xD8, 0x00000053);
+#ifdef ALTER_SWITCH
+	REG_WRITE(ah, PHY_SWITCH_CHAIN_0,
+		  (REG_READ(ah, PHY_SWITCH_CHAIN_0) & ~0x38)
+		  | ((REG_READ(ah, PHY_SWITCH_CHAIN_0) >> 3) & 0x38));
+#endif
+}
diff --git a/drivers/net/wireless/ath9k/phy.h b/drivers/net/wireless/ath9k/phy.h
new file mode 100644
index 000000000000..0cd399a5344a
--- /dev/null
+++ b/drivers/net/wireless/ath9k/phy.h
@@ -0,0 +1,543 @@
+/*
+ * Copyright (c) 2008 Atheros Communications Inc.
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#ifndef PHY_H
+#define PHY_H
+
+bool ath9k_hw_ar9280_set_channel(struct ath_hal *ah,
+					  struct ath9k_channel
+					  *chan);
+bool ath9k_hw_set_channel(struct ath_hal *ah,
+				   struct ath9k_channel *chan);
+void ath9k_hw_write_regs(struct ath_hal *ah, u32 modesIndex,
+			 u32 freqIndex, int regWrites);
+bool ath9k_hw_set_rf_regs(struct ath_hal *ah,
+				   struct ath9k_channel *chan,
+				   u16 modesIndex);
+void ath9k_hw_decrease_chain_power(struct ath_hal *ah,
+				   struct ath9k_channel *chan);
+bool ath9k_hw_init_rf(struct ath_hal *ah,
+			       int *status);
+
+#define AR_PHY_BASE     0x9800
+#define AR_PHY(_n)      (AR_PHY_BASE + ((_n)<<2))
+
+#define AR_PHY_TEST             0x9800
+#define PHY_AGC_CLR             0x10000000
+#define RFSILENT_BB             0x00002000
+
+#define AR_PHY_TURBO                0x9804
+#define AR_PHY_FC_TURBO_MODE        0x00000001
+#define AR_PHY_FC_TURBO_SHORT       0x00000002
+#define AR_PHY_FC_DYN2040_EN        0x00000004
+#define AR_PHY_FC_DYN2040_PRI_ONLY  0x00000008
+#define AR_PHY_FC_DYN2040_PRI_CH    0x00000010
+#define AR_PHY_FC_DYN2040_EXT_CH    0x00000020
+#define AR_PHY_FC_HT_EN             0x00000040
+#define AR_PHY_FC_SHORT_GI_40       0x00000080
+#define AR_PHY_FC_WALSH             0x00000100
+#define AR_PHY_FC_SINGLE_HT_LTF1    0x00000200
+
+#define AR_PHY_TIMING2           0x9810
+#define AR_PHY_TIMING3           0x9814
+#define AR_PHY_TIMING3_DSC_MAN   0xFFFE0000
+#define AR_PHY_TIMING3_DSC_MAN_S 17
+#define AR_PHY_TIMING3_DSC_EXP   0x0001E000
+#define AR_PHY_TIMING3_DSC_EXP_S 13
+
+#define AR_PHY_CHIP_ID            0x9818
+#define AR_PHY_CHIP_ID_REV_0      0x80
+#define AR_PHY_CHIP_ID_REV_1      0x81
+#define AR_PHY_CHIP_ID_9160_REV_0 0xb0
+
+#define AR_PHY_ACTIVE       0x981C
+#define AR_PHY_ACTIVE_EN    0x00000001
+#define AR_PHY_ACTIVE_DIS   0x00000000
+
+#define AR_PHY_RF_CTL2             0x9824
+#define AR_PHY_TX_END_DATA_START   0x000000FF
+#define AR_PHY_TX_END_DATA_START_S 0
+#define AR_PHY_TX_END_PA_ON        0x0000FF00
+#define AR_PHY_TX_END_PA_ON_S      8
+
+#define AR_PHY_RF_CTL3                  0x9828
+#define AR_PHY_TX_END_TO_A2_RX_ON       0x00FF0000
+#define AR_PHY_TX_END_TO_A2_RX_ON_S     16
+
+#define AR_PHY_ADC_CTL                  0x982C
+#define AR_PHY_ADC_CTL_OFF_INBUFGAIN    0x00000003
+#define AR_PHY_ADC_CTL_OFF_INBUFGAIN_S  0
+#define AR_PHY_ADC_CTL_OFF_PWDDAC       0x00002000
+#define AR_PHY_ADC_CTL_OFF_PWDBANDGAP   0x00004000
+#define AR_PHY_ADC_CTL_OFF_PWDADC       0x00008000
+#define AR_PHY_ADC_CTL_ON_INBUFGAIN     0x00030000
+#define AR_PHY_ADC_CTL_ON_INBUFGAIN_S   16
+
+#define AR_PHY_ADC_SERIAL_CTL       0x9830
+#define AR_PHY_SEL_INTERNAL_ADDAC   0x00000000
+#define AR_PHY_SEL_EXTERNAL_RADIO   0x00000001
+
+#define AR_PHY_RF_CTL4                    0x9834
+#define AR_PHY_RF_CTL4_TX_END_XPAB_OFF    0xFF000000
+#define AR_PHY_RF_CTL4_TX_END_XPAB_OFF_S  24
+#define AR_PHY_RF_CTL4_TX_END_XPAA_OFF    0x00FF0000
+#define AR_PHY_RF_CTL4_TX_END_XPAA_OFF_S  16
+#define AR_PHY_RF_CTL4_FRAME_XPAB_ON      0x0000FF00
+#define AR_PHY_RF_CTL4_FRAME_XPAB_ON_S    8
+#define AR_PHY_RF_CTL4_FRAME_XPAA_ON      0x000000FF
+#define AR_PHY_RF_CTL4_FRAME_XPAA_ON_S    0
+
+#define AR_PHY_SETTLING          0x9844
+#define AR_PHY_SETTLING_SWITCH   0x00003F80
+#define AR_PHY_SETTLING_SWITCH_S 7
+
+#define AR_PHY_RXGAIN                   0x9848
+#define AR_PHY_RXGAIN_TXRX_ATTEN        0x0003F000
+#define AR_PHY_RXGAIN_TXRX_ATTEN_S      12
+#define AR_PHY_RXGAIN_TXRX_RF_MAX       0x007C0000
+#define AR_PHY_RXGAIN_TXRX_RF_MAX_S     18
+#define AR9280_PHY_RXGAIN_TXRX_ATTEN    0x00003F80
+#define AR9280_PHY_RXGAIN_TXRX_ATTEN_S  7
+#define AR9280_PHY_RXGAIN_TXRX_MARGIN   0x001FC000
+#define AR9280_PHY_RXGAIN_TXRX_MARGIN_S 14
+
+#define AR_PHY_DESIRED_SZ           0x9850
+#define AR_PHY_DESIRED_SZ_ADC       0x000000FF
+#define AR_PHY_DESIRED_SZ_ADC_S     0
+#define AR_PHY_DESIRED_SZ_PGA       0x0000FF00
+#define AR_PHY_DESIRED_SZ_PGA_S     8
+#define AR_PHY_DESIRED_SZ_TOT_DES   0x0FF00000
+#define AR_PHY_DESIRED_SZ_TOT_DES_S 20
+
+#define AR_PHY_FIND_SIG           0x9858
+#define AR_PHY_FIND_SIG_FIRSTEP   0x0003F000
+#define AR_PHY_FIND_SIG_FIRSTEP_S 12
+#define AR_PHY_FIND_SIG_FIRPWR    0x03FC0000
+#define AR_PHY_FIND_SIG_FIRPWR_S  18
+
+#define AR_PHY_AGC_CTL1                  0x985C
+#define AR_PHY_AGC_CTL1_COARSE_LOW       0x00007F80
+#define AR_PHY_AGC_CTL1_COARSE_LOW_S     7
+#define AR_PHY_AGC_CTL1_COARSE_HIGH      0x003F8000
+#define AR_PHY_AGC_CTL1_COARSE_HIGH_S    15
+
+#define AR_PHY_AGC_CONTROL               0x9860
+#define AR_PHY_AGC_CONTROL_CAL           0x00000001
+#define AR_PHY_AGC_CONTROL_NF            0x00000002
+#define AR_PHY_AGC_CONTROL_ENABLE_NF     0x00008000
+#define AR_PHY_AGC_CONTROL_FLTR_CAL      0x00010000
+#define AR_PHY_AGC_CONTROL_NO_UPDATE_NF  0x00020000
+
+#define AR_PHY_CCA                  0x9864
+#define AR_PHY_MINCCA_PWR           0x0FF80000
+#define AR_PHY_MINCCA_PWR_S         19
+#define AR_PHY_CCA_THRESH62         0x0007F000
+#define AR_PHY_CCA_THRESH62_S       12
+#define AR9280_PHY_MINCCA_PWR       0x1FF00000
+#define AR9280_PHY_MINCCA_PWR_S     20
+#define AR9280_PHY_CCA_THRESH62     0x000FF000
+#define AR9280_PHY_CCA_THRESH62_S   12
+
+#define AR_PHY_SFCORR_LOW                    0x986C
+#define AR_PHY_SFCORR_LOW_USE_SELF_CORR_LOW  0x00000001
+#define AR_PHY_SFCORR_LOW_M2COUNT_THR_LOW    0x00003F00
+#define AR_PHY_SFCORR_LOW_M2COUNT_THR_LOW_S  8
+#define AR_PHY_SFCORR_LOW_M1_THRESH_LOW      0x001FC000
+#define AR_PHY_SFCORR_LOW_M1_THRESH_LOW_S    14
+#define AR_PHY_SFCORR_LOW_M2_THRESH_LOW      0x0FE00000
+#define AR_PHY_SFCORR_LOW_M2_THRESH_LOW_S    21
+
+#define AR_PHY_SFCORR                0x9868
+#define AR_PHY_SFCORR_M2COUNT_THR    0x0000001F
+#define AR_PHY_SFCORR_M2COUNT_THR_S  0
+#define AR_PHY_SFCORR_M1_THRESH      0x00FE0000
+#define AR_PHY_SFCORR_M1_THRESH_S    17
+#define AR_PHY_SFCORR_M2_THRESH      0x7F000000
+#define AR_PHY_SFCORR_M2_THRESH_S    24
+
+#define AR_PHY_SLEEP_CTR_CONTROL    0x9870
+#define AR_PHY_SLEEP_CTR_LIMIT      0x9874
+#define AR_PHY_SYNTH_CONTROL        0x9874
+#define AR_PHY_SLEEP_SCAL           0x9878
+
+#define AR_PHY_PLL_CTL          0x987c
+#define AR_PHY_PLL_CTL_40       0xaa
+#define AR_PHY_PLL_CTL_40_5413  0x04
+#define AR_PHY_PLL_CTL_44       0xab
+#define AR_PHY_PLL_CTL_44_2133  0xeb
+#define AR_PHY_PLL_CTL_40_2133  0xea
+
+#define AR_PHY_RX_DELAY           0x9914
+#define AR_PHY_SEARCH_START_DELAY 0x9918
+#define AR_PHY_RX_DELAY_DELAY     0x00003FFF
+
+#define AR_PHY_TIMING_CTRL4(_i)     (0x9920 + ((_i) << 12))
+#define AR_PHY_TIMING_CTRL4_IQCORR_Q_Q_COFF 0x01F
+#define AR_PHY_TIMING_CTRL4_IQCORR_Q_Q_COFF_S   0
+#define AR_PHY_TIMING_CTRL4_IQCORR_Q_I_COFF 0x7E0
+#define AR_PHY_TIMING_CTRL4_IQCORR_Q_I_COFF_S   5
+#define AR_PHY_TIMING_CTRL4_IQCORR_ENABLE   0x800
+#define AR_PHY_TIMING_CTRL4_IQCAL_LOG_COUNT_MAX 0xF000
+#define AR_PHY_TIMING_CTRL4_IQCAL_LOG_COUNT_MAX_S   12
+#define AR_PHY_TIMING_CTRL4_DO_CAL    0x10000
+
+#define AR_PHY_TIMING_CTRL4_ENABLE_SPUR_RSSI	0x80000000
+#define	AR_PHY_TIMING_CTRL4_ENABLE_SPUR_FILTER	0x40000000
+#define	AR_PHY_TIMING_CTRL4_ENABLE_CHAN_MASK	0x20000000
+#define	AR_PHY_TIMING_CTRL4_ENABLE_PILOT_MASK	0x10000000
+
+#define AR_PHY_TIMING5               0x9924
+#define AR_PHY_TIMING5_CYCPWR_THR1   0x000000FE
+#define AR_PHY_TIMING5_CYCPWR_THR1_S 1
+
+#define AR_PHY_POWER_TX_RATE1               0x9934
+#define AR_PHY_POWER_TX_RATE2               0x9938
+#define AR_PHY_POWER_TX_RATE_MAX            0x993c
+#define AR_PHY_POWER_TX_RATE_MAX_TPC_ENABLE 0x00000040
+
+#define AR_PHY_FRAME_CTL            0x9944
+#define AR_PHY_FRAME_CTL_TX_CLIP    0x00000038
+#define AR_PHY_FRAME_CTL_TX_CLIP_S  3
+
+#define AR_PHY_TXPWRADJ                   0x994C
+#define AR_PHY_TXPWRADJ_CCK_GAIN_DELTA    0x00000FC0
+#define AR_PHY_TXPWRADJ_CCK_GAIN_DELTA_S  6
+#define AR_PHY_TXPWRADJ_CCK_PCDAC_INDEX   0x00FC0000
+#define AR_PHY_TXPWRADJ_CCK_PCDAC_INDEX_S 18
+
+#define AR_PHY_RADAR_EXT      0x9940
+#define AR_PHY_RADAR_EXT_ENA  0x00004000
+
+#define AR_PHY_RADAR_0          0x9954
+#define AR_PHY_RADAR_0_ENA      0x00000001
+#define AR_PHY_RADAR_0_FFT_ENA  0x80000000
+#define AR_PHY_RADAR_0_INBAND   0x0000003e
+#define AR_PHY_RADAR_0_INBAND_S 1
+#define AR_PHY_RADAR_0_PRSSI    0x00000FC0
+#define AR_PHY_RADAR_0_PRSSI_S  6
+#define AR_PHY_RADAR_0_HEIGHT   0x0003F000
+#define AR_PHY_RADAR_0_HEIGHT_S 12
+#define AR_PHY_RADAR_0_RRSSI    0x00FC0000
+#define AR_PHY_RADAR_0_RRSSI_S  18
+#define AR_PHY_RADAR_0_FIRPWR   0x7F000000
+#define AR_PHY_RADAR_0_FIRPWR_S 24
+
+#define AR_PHY_RADAR_1                  0x9958
+#define AR_PHY_RADAR_1_RELPWR_ENA       0x00800000
+#define AR_PHY_RADAR_1_USE_FIR128       0x00400000
+#define AR_PHY_RADAR_1_RELPWR_THRESH    0x003F0000
+#define AR_PHY_RADAR_1_RELPWR_THRESH_S  16
+#define AR_PHY_RADAR_1_BLOCK_CHECK      0x00008000
+#define AR_PHY_RADAR_1_MAX_RRSSI        0x00004000
+#define AR_PHY_RADAR_1_RELSTEP_CHECK    0x00002000
+#define AR_PHY_RADAR_1_RELSTEP_THRESH   0x00001F00
+#define AR_PHY_RADAR_1_RELSTEP_THRESH_S 8
+#define AR_PHY_RADAR_1_MAXLEN           0x000000FF
+#define AR_PHY_RADAR_1_MAXLEN_S         0
+
+#define AR_PHY_SWITCH_CHAIN_0     0x9960
+#define AR_PHY_SWITCH_COM         0x9964
+
+#define AR_PHY_SIGMA_DELTA            0x996C
+#define AR_PHY_SIGMA_DELTA_ADC_SEL    0x00000003
+#define AR_PHY_SIGMA_DELTA_ADC_SEL_S  0
+#define AR_PHY_SIGMA_DELTA_FILT2      0x000000F8
+#define AR_PHY_SIGMA_DELTA_FILT2_S    3
+#define AR_PHY_SIGMA_DELTA_FILT1      0x00001F00
+#define AR_PHY_SIGMA_DELTA_FILT1_S    8
+#define AR_PHY_SIGMA_DELTA_ADC_CLIP   0x01FFE000
+#define AR_PHY_SIGMA_DELTA_ADC_CLIP_S 13
+
+#define AR_PHY_RESTART          0x9970
+#define AR_PHY_RESTART_DIV_GC   0x001C0000
+#define AR_PHY_RESTART_DIV_GC_S 18
+
+#define AR_PHY_RFBUS_REQ        0x997C
+#define AR_PHY_RFBUS_REQ_EN     0x00000001
+
+#define	AR_PHY_TIMING7		        0x9980
+#define	AR_PHY_TIMING8		        0x9984
+#define	AR_PHY_TIMING8_PILOT_MASK_2	0x000FFFFF
+#define	AR_PHY_TIMING8_PILOT_MASK_2_S	0
+
+#define	AR_PHY_BIN_MASK2_1	0x9988
+#define	AR_PHY_BIN_MASK2_2	0x998c
+#define	AR_PHY_BIN_MASK2_3	0x9990
+#define	AR_PHY_BIN_MASK2_4	0x9994
+
+#define	AR_PHY_BIN_MASK_1	0x9900
+#define	AR_PHY_BIN_MASK_2	0x9904
+#define	AR_PHY_BIN_MASK_3	0x9908
+
+#define	AR_PHY_MASK_CTL		0x990c
+
+#define	AR_PHY_BIN_MASK2_4_MASK_4	0x00003FFF
+#define	AR_PHY_BIN_MASK2_4_MASK_4_S	0
+
+#define	AR_PHY_TIMING9		        0x9998
+#define	AR_PHY_TIMING10		        0x999c
+#define	AR_PHY_TIMING10_PILOT_MASK_2	0x000FFFFF
+#define	AR_PHY_TIMING10_PILOT_MASK_2_S	0
+
+#define	AR_PHY_TIMING11			        0x99a0
+#define	AR_PHY_TIMING11_SPUR_DELTA_PHASE	0x000FFFFF
+#define	AR_PHY_TIMING11_SPUR_DELTA_PHASE_S	0
+#define	AR_PHY_TIMING11_SPUR_FREQ_SD		0x3FF00000
+#define	AR_PHY_TIMING11_SPUR_FREQ_SD_S		20
+#define AR_PHY_TIMING11_USE_SPUR_IN_AGC		0x40000000
+#define AR_PHY_TIMING11_USE_SPUR_IN_SELFCOR	0x80000000
+
+#define AR_PHY_RX_CHAINMASK     0x99a4
+#define AR_PHY_NEW_ADC_DC_GAIN_CORR(_i) (0x99b4 + ((_i) << 12))
+#define AR_PHY_NEW_ADC_GAIN_CORR_ENABLE 0x40000000
+#define AR_PHY_NEW_ADC_DC_OFFSET_CORR_ENABLE 0x80000000
+#define AR_PHY_MULTICHAIN_GAIN_CTL  0x99ac
+
+#define AR_PHY_EXT_CCA0             0x99b8
+#define AR_PHY_EXT_CCA0_THRESH62    0x000000FF
+#define AR_PHY_EXT_CCA0_THRESH62_S  0
+
+#define AR_PHY_EXT_CCA                  0x99bc
+#define AR_PHY_EXT_CCA_CYCPWR_THR1      0x0000FE00
+#define AR_PHY_EXT_CCA_CYCPWR_THR1_S    9
+#define AR_PHY_EXT_CCA_THRESH62         0x007F0000
+#define AR_PHY_EXT_CCA_THRESH62_S       16
+#define AR_PHY_EXT_MINCCA_PWR           0xFF800000
+#define AR_PHY_EXT_MINCCA_PWR_S         23
+#define AR9280_PHY_EXT_MINCCA_PWR       0x01FF0000
+#define AR9280_PHY_EXT_MINCCA_PWR_S     16
+
+#define AR_PHY_SFCORR_EXT                 0x99c0
+#define AR_PHY_SFCORR_EXT_M1_THRESH       0x0000007F
+#define AR_PHY_SFCORR_EXT_M1_THRESH_S     0
+#define AR_PHY_SFCORR_EXT_M2_THRESH       0x00003F80
+#define AR_PHY_SFCORR_EXT_M2_THRESH_S     7
+#define AR_PHY_SFCORR_EXT_M1_THRESH_LOW   0x001FC000
+#define AR_PHY_SFCORR_EXT_M1_THRESH_LOW_S 14
+#define AR_PHY_SFCORR_EXT_M2_THRESH_LOW   0x0FE00000
+#define AR_PHY_SFCORR_EXT_M2_THRESH_LOW_S 21
+#define AR_PHY_SFCORR_SPUR_SUBCHNL_SD_S   28
+
+#define AR_PHY_HALFGI           0x99D0
+#define AR_PHY_HALFGI_DSC_MAN   0x0007FFF0
+#define AR_PHY_HALFGI_DSC_MAN_S 4
+#define AR_PHY_HALFGI_DSC_EXP   0x0000000F
+#define AR_PHY_HALFGI_DSC_EXP_S 0
+
+#define AR_PHY_CHAN_INFO_MEMORY               0x99DC
+#define AR_PHY_CHAN_INFO_MEMORY_CAPTURE_MASK  0x0001
+
+#define AR_PHY_HEAVY_CLIP_ENABLE         0x99E0
+
+#define AR_PHY_M_SLEEP      0x99f0
+#define AR_PHY_REFCLKDLY    0x99f4
+#define AR_PHY_REFCLKPD     0x99f8
+
+#define AR_PHY_CALMODE      0x99f0
+
+#define AR_PHY_CALMODE_IQ           0x00000000
+#define AR_PHY_CALMODE_ADC_GAIN     0x00000001
+#define AR_PHY_CALMODE_ADC_DC_PER   0x00000002
+#define AR_PHY_CALMODE_ADC_DC_INIT  0x00000003
+
+#define AR_PHY_CAL_MEAS_0(_i)     (0x9c10 + ((_i) << 12))
+#define AR_PHY_CAL_MEAS_1(_i)     (0x9c14 + ((_i) << 12))
+#define AR_PHY_CAL_MEAS_2(_i)     (0x9c18 + ((_i) << 12))
+#define AR_PHY_CAL_MEAS_3(_i)     (0x9c1c + ((_i) << 12))
+
+#define AR_PHY_CURRENT_RSSI 0x9c1c
+#define AR9280_PHY_CURRENT_RSSI 0x9c3c
+
+#define AR_PHY_RFBUS_GRANT       0x9C20
+#define AR_PHY_RFBUS_GRANT_EN    0x00000001
+
+#define AR_PHY_CHAN_INFO_GAIN_DIFF             0x9CF4
+#define AR_PHY_CHAN_INFO_GAIN_DIFF_UPPER_LIMIT 320
+
+#define AR_PHY_CHAN_INFO_GAIN          0x9CFC
+
+#define AR_PHY_MODE         0xA200
+#define AR_PHY_MODE_AR2133  0x08
+#define AR_PHY_MODE_AR5111  0x00
+#define AR_PHY_MODE_AR5112  0x08
+#define AR_PHY_MODE_DYNAMIC 0x04
+#define AR_PHY_MODE_RF2GHZ  0x02
+#define AR_PHY_MODE_RF5GHZ  0x00
+#define AR_PHY_MODE_CCK     0x01
+#define AR_PHY_MODE_OFDM    0x00
+#define AR_PHY_MODE_DYN_CCK_DISABLE 0x100
+
+#define AR_PHY_CCK_TX_CTRL       0xA204
+#define AR_PHY_CCK_TX_CTRL_JAPAN 0x00000010
+
+#define AR_PHY_CCK_DETECT                           0xA208
+#define AR_PHY_CCK_DETECT_WEAK_SIG_THR_CCK          0x0000003F
+#define AR_PHY_CCK_DETECT_WEAK_SIG_THR_CCK_S        0
+/* [12:6] settling time for antenna switch */
+#define AR_PHY_CCK_DETECT_ANT_SWITCH_TIME           0x00001FC0
+#define AR_PHY_CCK_DETECT_ANT_SWITCH_TIME_S         6
+#define AR_PHY_CCK_DETECT_BB_ENABLE_ANT_FAST_DIV    0x2000
+
+#define AR_PHY_GAIN_2GHZ                0xA20C
+#define AR_PHY_GAIN_2GHZ_RXTX_MARGIN    0x00FC0000
+#define AR_PHY_GAIN_2GHZ_RXTX_MARGIN_S  18
+#define AR_PHY_GAIN_2GHZ_BSW_MARGIN     0x00003C00
+#define AR_PHY_GAIN_2GHZ_BSW_MARGIN_S   10
+#define AR_PHY_GAIN_2GHZ_BSW_ATTEN      0x0000001F
+#define AR_PHY_GAIN_2GHZ_BSW_ATTEN_S    0
+
+#define AR_PHY_GAIN_2GHZ_XATTEN2_MARGIN     0x003E0000
+#define AR_PHY_GAIN_2GHZ_XATTEN2_MARGIN_S   17
+#define AR_PHY_GAIN_2GHZ_XATTEN1_MARGIN     0x0001F000
+#define AR_PHY_GAIN_2GHZ_XATTEN1_MARGIN_S   12
+#define AR_PHY_GAIN_2GHZ_XATTEN2_DB         0x00000FC0
+#define AR_PHY_GAIN_2GHZ_XATTEN2_DB_S       6
+#define AR_PHY_GAIN_2GHZ_XATTEN1_DB         0x0000003F
+#define AR_PHY_GAIN_2GHZ_XATTEN1_DB_S       0
+
+#define AR_PHY_CCK_RXCTRL4  0xA21C
+#define AR_PHY_CCK_RXCTRL4_FREQ_EST_SHORT   0x01F80000
+#define AR_PHY_CCK_RXCTRL4_FREQ_EST_SHORT_S 19
+
+#define AR_PHY_DAG_CTRLCCK  0xA228
+#define AR_PHY_DAG_CTRLCCK_EN_RSSI_THR  0x00000200
+#define AR_PHY_DAG_CTRLCCK_RSSI_THR     0x0001FC00
+#define AR_PHY_DAG_CTRLCCK_RSSI_THR_S   10
+
+#define AR_PHY_FORCE_CLKEN_CCK              0xA22C
+#define AR_PHY_FORCE_CLKEN_CCK_MRC_MUX      0x00000040
+
+#define AR_PHY_POWER_TX_RATE3   0xA234
+#define AR_PHY_POWER_TX_RATE4   0xA238
+
+#define AR_PHY_SCRM_SEQ_XR       0xA23C
+#define AR_PHY_HEADER_DETECT_XR  0xA240
+#define AR_PHY_CHIRP_DETECTED_XR 0xA244
+#define AR_PHY_BLUETOOTH         0xA254
+
+#define AR_PHY_TPCRG1   0xA258
+#define AR_PHY_TPCRG1_NUM_PD_GAIN   0x0000c000
+#define AR_PHY_TPCRG1_NUM_PD_GAIN_S 14
+
+#define AR_PHY_TPCRG1_PD_GAIN_1    0x00030000
+#define AR_PHY_TPCRG1_PD_GAIN_1_S  16
+#define AR_PHY_TPCRG1_PD_GAIN_2    0x000C0000
+#define AR_PHY_TPCRG1_PD_GAIN_2_S  18
+#define AR_PHY_TPCRG1_PD_GAIN_3    0x00300000
+#define AR_PHY_TPCRG1_PD_GAIN_3_S  20
+
+#define AR_PHY_VIT_MASK2_M_46_61 0xa3a0
+#define AR_PHY_MASK2_M_31_45     0xa3a4
+#define AR_PHY_MASK2_M_16_30     0xa3a8
+#define AR_PHY_MASK2_M_00_15     0xa3ac
+#define AR_PHY_MASK2_P_15_01     0xa3b8
+#define AR_PHY_MASK2_P_30_16     0xa3bc
+#define AR_PHY_MASK2_P_45_31     0xa3c0
+#define AR_PHY_MASK2_P_61_45     0xa3c4
+#define AR_PHY_SPUR_REG          0x994c
+
+#define AR_PHY_SPUR_REG_MASK_RATE_CNTL       (0xFF << 18)
+#define AR_PHY_SPUR_REG_MASK_RATE_CNTL_S     18
+
+#define AR_PHY_SPUR_REG_ENABLE_MASK_PPM      0x20000
+#define AR_PHY_SPUR_REG_MASK_RATE_SELECT     (0xFF << 9)
+#define AR_PHY_SPUR_REG_MASK_RATE_SELECT_S   9
+#define AR_PHY_SPUR_REG_ENABLE_VIT_SPUR_RSSI 0x100
+#define AR_PHY_SPUR_REG_SPUR_RSSI_THRESH     0x7F
+#define AR_PHY_SPUR_REG_SPUR_RSSI_THRESH_S   0
+
+#define AR_PHY_PILOT_MASK_01_30   0xa3b0
+#define AR_PHY_PILOT_MASK_31_60   0xa3b4
+
+#define AR_PHY_CHANNEL_MASK_01_30 0x99d4
+#define AR_PHY_CHANNEL_MASK_31_60 0x99d8
+
+#define AR_PHY_ANALOG_SWAP      0xa268
+#define AR_PHY_SWAP_ALT_CHAIN   0x00000040
+
+#define AR_PHY_TPCRG5   0xA26C
+#define AR_PHY_TPCRG5_PD_GAIN_OVERLAP       0x0000000F
+#define AR_PHY_TPCRG5_PD_GAIN_OVERLAP_S     0
+#define AR_PHY_TPCRG5_PD_GAIN_BOUNDARY_1    0x000003F0
+#define AR_PHY_TPCRG5_PD_GAIN_BOUNDARY_1_S  4
+#define AR_PHY_TPCRG5_PD_GAIN_BOUNDARY_2    0x0000FC00
+#define AR_PHY_TPCRG5_PD_GAIN_BOUNDARY_2_S  10
+#define AR_PHY_TPCRG5_PD_GAIN_BOUNDARY_3    0x003F0000
+#define AR_PHY_TPCRG5_PD_GAIN_BOUNDARY_3_S  16
+#define AR_PHY_TPCRG5_PD_GAIN_BOUNDARY_4    0x0FC00000
+#define AR_PHY_TPCRG5_PD_GAIN_BOUNDARY_4_S  22
+
+#define AR_PHY_POWER_TX_RATE5   0xA38C
+#define AR_PHY_POWER_TX_RATE6   0xA390
+
+#define AR_PHY_CAL_CHAINMASK    0xA39C
+
+#define AR_PHY_POWER_TX_SUB     0xA3C8
+#define AR_PHY_POWER_TX_RATE7   0xA3CC
+#define AR_PHY_POWER_TX_RATE8   0xA3D0
+#define AR_PHY_POWER_TX_RATE9   0xA3D4
+
+#define AR_PHY_XPA_CFG  	0xA3D8
+#define AR_PHY_FORCE_XPA_CFG	0x000000001
+#define AR_PHY_FORCE_XPA_CFG_S	0
+
+#define AR_PHY_CH1_CCA          0xa864
+#define AR_PHY_CH1_MINCCA_PWR   0x0FF80000
+#define AR_PHY_CH1_MINCCA_PWR_S 19
+#define AR9280_PHY_CH1_MINCCA_PWR   0x1FF00000
+#define AR9280_PHY_CH1_MINCCA_PWR_S 20
+
+#define AR_PHY_CH2_CCA          0xb864
+#define AR_PHY_CH2_MINCCA_PWR   0x0FF80000
+#define AR_PHY_CH2_MINCCA_PWR_S 19
+
+#define AR_PHY_CH1_EXT_CCA          0xa9bc
+#define AR_PHY_CH1_EXT_MINCCA_PWR   0xFF800000
+#define AR_PHY_CH1_EXT_MINCCA_PWR_S 23
+#define AR9280_PHY_CH1_EXT_MINCCA_PWR   0x01FF0000
+#define AR9280_PHY_CH1_EXT_MINCCA_PWR_S 16
+
+#define AR_PHY_CH2_EXT_CCA          0xb9bc
+#define AR_PHY_CH2_EXT_MINCCA_PWR   0xFF800000
+#define AR_PHY_CH2_EXT_MINCCA_PWR_S 23
+
+#define REG_WRITE_RF_ARRAY(iniarray, regData, regWr) do {               \
+		int r;							\
+		for (r = 0; r < ((iniarray)->ia_rows); r++) {		\
+			REG_WRITE(ah, INI_RA((iniarray), r, 0), (regData)[r]); \
+			DPRINTF(ah->ah_sc, ATH_DBG_CHANNEL, \
+				"RF 0x%x V 0x%x\n", \
+				INI_RA((iniarray), r, 0), (regData)[r]); \
+			DO_DELAY(regWr);				\
+		}							\
+	} while (0)
+
+#define ATH9K_KEY_XOR                 0xaa
+
+#define ATH9K_IS_MIC_ENABLED(ah)					\
+	(AH5416(ah)->ah_staId1Defaults & AR_STA_ID1_CRPT_MIC_ENABLE)
+
+#define ANTSWAP_AB 0x0001
+#define REDUCE_CHAIN_0 0x00000050
+#define REDUCE_CHAIN_1 0x00000051
+
+#define RF_BANK_SETUP(_bank, _iniarray, _col) do {			\
+		int i;							\
+		for (i = 0; i < (_iniarray)->ia_rows; i++)		\
+			(_bank)[i] = INI_RA((_iniarray), i, _col);;	\
+	} while (0)
+
+#endif
diff --git a/drivers/net/wireless/ath9k/rc.c b/drivers/net/wireless/ath9k/rc.c
new file mode 100644
index 000000000000..73c460ad355f
--- /dev/null
+++ b/drivers/net/wireless/ath9k/rc.c
@@ -0,0 +1,2126 @@
+/*
+ * Copyright (c) 2004 Video54 Technologies, Inc.
+ * Copyright (c) 2004-2008 Atheros Communications, Inc.
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+/*
+ * Atheros rate control algorithm
+ */
+
+#include "core.h"
+#include "../net/mac80211/rate.h"
+
+static u32 tx_triglevel_max;
+
+static struct ath_rate_table ar5416_11na_ratetable = {
+	42,
+	{
+		{ TRUE, TRUE, WLAN_PHY_OFDM, 6000, /* 6 Mb */
+			5400, 0x0b, 0x00, 12,
+			0, 2, 1, 0, 0, 0, 0, 0 },
+		{ TRUE,	TRUE, WLAN_PHY_OFDM, 9000, /* 9 Mb */
+			7800,  0x0f, 0x00, 18,
+			0, 3, 1, 1, 1, 1, 1, 0 },
+		{ TRUE, TRUE, WLAN_PHY_OFDM, 12000, /* 12 Mb */
+			10000, 0x0a, 0x00, 24,
+			2, 4, 2, 2, 2, 2, 2, 0 },
+		{ TRUE, TRUE, WLAN_PHY_OFDM, 18000, /* 18 Mb */
+			13900, 0x0e, 0x00, 36,
+			2, 6,  2, 3, 3, 3, 3, 0 },
+		{ TRUE, TRUE, WLAN_PHY_OFDM, 24000, /* 24 Mb */
+			17300, 0x09, 0x00, 48,
+			4, 10, 3, 4, 4, 4, 4, 0 },
+		{ TRUE, TRUE, WLAN_PHY_OFDM, 36000, /* 36 Mb */
+			23000, 0x0d, 0x00, 72,
+			4, 14, 3, 5, 5, 5, 5, 0 },
+		{ TRUE, TRUE, WLAN_PHY_OFDM, 48000, /* 48 Mb */
+			27400, 0x08, 0x00, 96,
+			4, 20, 3, 6, 6, 6, 6, 0 },
+		{ TRUE, TRUE, WLAN_PHY_OFDM, 54000, /* 54 Mb */
+			29300, 0x0c, 0x00, 108,
+			4, 23, 3, 7, 7, 7, 7, 0 },
+		{ TRUE_20, TRUE_20, WLAN_PHY_HT_20_SS, 6500, /* 6.5 Mb */
+			6400, 0x80, 0x00, 0,
+			0, 2, 3, 8, 24, 8, 24, 3216 },
+		{ TRUE_20, TRUE_20, WLAN_PHY_HT_20_SS, 13000, /* 13 Mb */
+			12700, 0x81, 0x00, 1,
+			2, 4, 3, 9, 25, 9, 25, 6434 },
+		{ TRUE_20, TRUE_20, WLAN_PHY_HT_20_SS, 19500, /* 19.5 Mb */
+			18800, 0x82, 0x00, 2,
+			2, 6, 3, 10, 26, 10, 26, 9650 },
+		{ TRUE_20, TRUE_20, WLAN_PHY_HT_20_SS, 26000, /* 26 Mb */
+			25000, 0x83, 0x00, 3,
+			4, 10, 3, 11, 27, 11, 27, 12868 },
+		{ TRUE_20, TRUE_20, WLAN_PHY_HT_20_SS, 39000, /* 39 Mb */
+			36700, 0x84, 0x00, 4,
+			4, 14, 3, 12, 28, 12, 28, 19304 },
+		{ FALSE, TRUE_20, WLAN_PHY_HT_20_SS, 52000, /* 52 Mb */
+			48100, 0x85, 0x00, 5,
+			4, 20, 3, 13, 29, 13, 29, 25740 },
+		{ FALSE, TRUE_20, WLAN_PHY_HT_20_SS, 58500, /* 58.5 Mb */
+			53500, 0x86, 0x00, 6,
+			4, 23, 3, 14, 30, 14, 30,  28956 },
+		{ FALSE, TRUE_20, WLAN_PHY_HT_20_SS, 65000, /* 65 Mb */
+			59000, 0x87, 0x00, 7,
+			4, 25, 3, 15, 31, 15, 32, 32180 },
+		{ FALSE, FALSE, WLAN_PHY_HT_20_DS, 13000, /* 13 Mb */
+			12700, 0x88, 0x00,
+			8, 0, 2, 3, 16, 33, 16, 33, 6430 },
+		{ FALSE, FALSE, WLAN_PHY_HT_20_DS, 26000, /* 26 Mb */
+			24800, 0x89, 0x00, 9,
+			2, 4, 3, 17, 34, 17, 34, 12860 },
+		{ FALSE, FALSE, WLAN_PHY_HT_20_DS, 39000, /* 39 Mb */
+			36600, 0x8a, 0x00, 10,
+			2, 6, 3, 18, 35, 18, 35, 19300 },
+		{ TRUE_20, FALSE, WLAN_PHY_HT_20_DS, 52000, /* 52 Mb */
+			48100, 0x8b, 0x00, 11,
+			4, 10, 3, 19, 36, 19, 36, 25736 },
+		{ TRUE_20, FALSE, WLAN_PHY_HT_20_DS, 78000, /* 78 Mb */
+			69500, 0x8c, 0x00, 12,
+			4, 14, 3, 20, 37, 20, 37, 38600 },
+		{ TRUE_20, FALSE, WLAN_PHY_HT_20_DS, 104000, /* 104 Mb */
+			89500, 0x8d, 0x00, 13,
+			4, 20, 3, 21, 38, 21, 38, 51472 },
+		{ TRUE_20, FALSE, WLAN_PHY_HT_20_DS, 117000, /* 117 Mb */
+			98900, 0x8e, 0x00, 14,
+			4, 23, 3, 22, 39, 22, 39, 57890 },
+		{ TRUE_20, FALSE, WLAN_PHY_HT_20_DS, 130000, /* 130 Mb */
+			108300, 0x8f, 0x00, 15,
+			4, 25, 3, 23, 40, 23, 41, 64320 },
+		{ TRUE_40, TRUE_40, WLAN_PHY_HT_40_SS, 13500, /* 13.5 Mb */
+			13200, 0x80, 0x00, 0,
+			0, 2, 3, 8, 24, 24, 24, 6684 },
+		{ TRUE_40, TRUE_40, WLAN_PHY_HT_40_SS, 27500, /* 27.0 Mb */
+			25900, 0x81, 0x00, 1,
+			2, 4, 3, 9, 25, 25, 25, 13368 },
+		{ TRUE_40, TRUE_40, WLAN_PHY_HT_40_SS, 40500, /* 40.5 Mb */
+			38600, 0x82, 0x00, 2,
+			2, 6, 3, 10, 26, 26, 26, 20052 },
+		{ TRUE_40, TRUE_40, WLAN_PHY_HT_40_SS, 54000, /* 54 Mb */
+			49800, 0x83, 0x00, 3,
+			4, 10, 3, 11, 27, 27, 27, 26738 },
+		{ TRUE_40, TRUE_40, WLAN_PHY_HT_40_SS, 81500, /* 81 Mb */
+			72200, 0x84, 0x00, 4,
+			4, 14, 3, 12, 28, 28, 28, 40104 },
+		{ FALSE, TRUE_40, WLAN_PHY_HT_40_SS, 108000, /* 108 Mb */
+			92900, 0x85, 0x00, 5,
+			4, 20, 3, 13, 29, 29, 29, 53476 },
+		{ FALSE, TRUE_40, WLAN_PHY_HT_40_SS, 121500, /* 121.5 Mb */
+			102700, 0x86, 0x00, 6,
+			4, 23, 3, 14, 30, 30, 30, 60156 },
+		{ FALSE, TRUE_40, WLAN_PHY_HT_40_SS, 135000, /* 135 Mb */
+			112000, 0x87, 0x00, 7,
+			4, 25, 3, 15, 31, 32, 32, 66840 },
+		{ FALSE, TRUE_40, WLAN_PHY_HT_40_SS_HGI, 150000, /* 150 Mb */
+			122000, 0x87, 0x00, 7,
+			4, 25, 3, 15, 31, 32, 32, 74200 },
+		{ FALSE, FALSE, WLAN_PHY_HT_40_DS, 27000, /* 27 Mb */
+			25800, 0x88, 0x00, 8,
+			0, 2, 3, 16, 33, 33, 33, 13360 },
+		{ FALSE, FALSE, WLAN_PHY_HT_40_DS, 54000, /* 54 Mb */
+			49800, 0x89, 0x00, 9,
+			2, 4, 3, 17, 34, 34, 34, 26720 },
+		{ FALSE, FALSE, WLAN_PHY_HT_40_DS, 81000, /* 81 Mb */
+			71900, 0x8a, 0x00, 10,
+			2, 6, 3, 18, 35, 35, 35, 40080 },
+		{ TRUE_40, FALSE, WLAN_PHY_HT_40_DS, 108000, /* 108 Mb */
+			92500, 0x8b, 0x00, 11,
+			4, 10, 3, 19, 36, 36, 36, 53440 },
+		{ TRUE_40, FALSE, WLAN_PHY_HT_40_DS, 162000, /* 162 Mb */
+			130300, 0x8c, 0x00, 12,
+			4, 14, 3, 20, 37, 37, 37, 80160 },
+		{ TRUE_40, FALSE, WLAN_PHY_HT_40_DS, 216000, /* 216 Mb */
+			162800, 0x8d, 0x00, 13,
+			4, 20, 3, 21, 38, 38, 38, 106880 },
+		{ TRUE_40, FALSE, WLAN_PHY_HT_40_DS, 243000, /* 243 Mb */
+			178200, 0x8e, 0x00, 14,
+			4, 23, 3, 22, 39, 39, 39, 120240 },
+		{ TRUE_40, FALSE, WLAN_PHY_HT_40_DS, 270000, /* 270 Mb */
+			192100, 0x8f, 0x00, 15,
+			4, 25, 3, 23, 40, 41, 41, 133600 },
+		{ TRUE_40, FALSE, WLAN_PHY_HT_40_DS_HGI, 300000, /* 300 Mb */
+			207000, 0x8f, 0x00, 15,
+			4, 25, 3, 23, 40, 41, 41, 148400 },
+	},
+	50,  /* probe interval */
+	50,  /* rssi reduce interval */
+	WLAN_RC_HT_FLAG,  /* Phy rates allowed initially */
+};
+
+/* TRUE_ALL - valid for 20/40/Legacy,
+ * TRUE - Legacy only,
+ * TRUE_20 - HT 20 only,
+ * TRUE_40 - HT 40 only */
+
+/* 4ms frame limit not used for NG mode.  The values filled
+ * for HT are the 64K max aggregate limit */
+
+static struct ath_rate_table ar5416_11ng_ratetable = {
+	46,
+	{
+		{ TRUE_ALL, TRUE_ALL, WLAN_PHY_CCK, 1000, /* 1 Mb */
+			900, 0x1b, 0x00, 2,
+			0, 0, 1, 0, 0, 0, 0, 0 },
+		{ TRUE_ALL, TRUE_ALL, WLAN_PHY_CCK, 2000, /* 2 Mb */
+			1900, 0x1a, 0x04, 4,
+			1, 1, 1, 1, 1, 1, 1, 0 },
+		{ TRUE_ALL, TRUE_ALL, WLAN_PHY_CCK, 5500, /* 5.5 Mb */
+			4900, 0x19, 0x04, 11,
+			2, 2, 2, 2, 2, 2, 2, 0 },
+		{ TRUE_ALL, TRUE_ALL, WLAN_PHY_CCK, 11000, /* 11 Mb */
+			8100, 0x18, 0x04, 22,
+			3, 3, 2, 3, 3, 3, 3, 0 },
+		{ FALSE, FALSE, WLAN_PHY_OFDM, 6000, /* 6 Mb */
+			5400, 0x0b, 0x00, 12,
+			4, 2, 1, 4, 4, 4, 4, 0 },
+		{ FALSE, FALSE, WLAN_PHY_OFDM, 9000, /* 9 Mb */
+			7800, 0x0f, 0x00, 18,
+			4, 3, 1, 5, 5, 5, 5, 0 },
+		{ TRUE, TRUE, WLAN_PHY_OFDM, 12000, /* 12 Mb */
+			10100, 0x0a, 0x00, 24,
+			6, 4, 1, 6, 6, 6, 6, 0 },
+		{ TRUE, TRUE, WLAN_PHY_OFDM, 18000, /* 18 Mb */
+			14100,  0x0e, 0x00, 36,
+			6, 6, 2, 7, 7, 7, 7, 0 },
+		{ TRUE, TRUE, WLAN_PHY_OFDM, 24000, /* 24 Mb */
+			17700, 0x09, 0x00, 48,
+			8, 10, 3, 8, 8, 8, 8, 0 },
+		{ TRUE, TRUE, WLAN_PHY_OFDM, 36000, /* 36 Mb */
+			23700, 0x0d, 0x00, 72,
+			8, 14, 3, 9, 9, 9, 9, 0 },
+		{ TRUE, TRUE, WLAN_PHY_OFDM, 48000, /* 48 Mb */
+			27400, 0x08, 0x00, 96,
+			8, 20, 3, 10, 10, 10, 10, 0 },
+		{ TRUE, TRUE, WLAN_PHY_OFDM, 54000, /* 54 Mb */
+			30900, 0x0c, 0x00, 108,
+			8, 23, 3, 11, 11, 11, 11, 0 },
+		{ FALSE, FALSE, WLAN_PHY_HT_20_SS, 6500, /* 6.5 Mb */
+			6400, 0x80, 0x00, 0,
+			4, 2, 3, 12, 28, 12, 28, 3216 },
+		{ TRUE_20, TRUE_20, WLAN_PHY_HT_20_SS, 13000, /* 13 Mb */
+			12700, 0x81, 0x00, 1,
+			6, 4, 3, 13, 29, 13, 29, 6434 },
+		{ TRUE_20, TRUE_20, WLAN_PHY_HT_20_SS, 19500, /* 19.5 Mb */
+			18800, 0x82, 0x00, 2,
+			6, 6, 3, 14, 30, 14, 30, 9650 },
+		{ TRUE_20, TRUE_20, WLAN_PHY_HT_20_SS, 26000, /* 26 Mb */
+			25000, 0x83, 0x00, 3,
+			8, 10, 3, 15, 31, 15, 31, 12868 },
+		{ TRUE_20, TRUE_20, WLAN_PHY_HT_20_SS, 39000, /* 39 Mb */
+			36700, 0x84, 0x00, 4,
+			8, 14, 3, 16, 32, 16, 32, 19304 },
+		{ FALSE, TRUE_20, WLAN_PHY_HT_20_SS, 52000, /* 52 Mb */
+			48100, 0x85, 0x00, 5,
+			8, 20, 3, 17, 33, 17, 33, 25740 },
+		{ FALSE,  TRUE_20, WLAN_PHY_HT_20_SS, 58500, /* 58.5 Mb */
+			53500, 0x86, 0x00, 6,
+			8, 23, 3, 18, 34, 18, 34, 28956 },
+		{ FALSE, TRUE_20, WLAN_PHY_HT_20_SS, 65000, /* 65 Mb */
+			59000, 0x87, 0x00, 7,
+			8, 25, 3, 19, 35, 19, 36, 32180 },
+		{ FALSE, FALSE, WLAN_PHY_HT_20_DS, 13000, /* 13 Mb */
+			12700, 0x88, 0x00, 8,
+			4, 2, 3, 20, 37, 20, 37, 6430 },
+		{ FALSE, FALSE, WLAN_PHY_HT_20_DS, 26000, /* 26 Mb */
+			24800, 0x89, 0x00, 9,
+			6, 4, 3, 21, 38, 21, 38, 12860 },
+		{ FALSE, FALSE, WLAN_PHY_HT_20_DS, 39000, /* 39 Mb */
+			36600, 0x8a, 0x00, 10,
+			6, 6, 3, 22, 39, 22, 39, 19300 },
+		{ TRUE_20, FALSE, WLAN_PHY_HT_20_DS, 52000, /* 52 Mb */
+			48100, 0x8b, 0x00, 11,
+			8, 10, 3, 23, 40, 23, 40, 25736 },
+		{ TRUE_20, FALSE, WLAN_PHY_HT_20_DS, 78000, /* 78 Mb */
+			69500, 0x8c, 0x00, 12,
+			8, 14, 3, 24, 41, 24, 41, 38600 },
+		{ TRUE_20, FALSE, WLAN_PHY_HT_20_DS, 104000, /* 104 Mb */
+			89500, 0x8d, 0x00, 13,
+			8, 20, 3, 25, 42, 25, 42, 51472 },
+		{ TRUE_20, FALSE, WLAN_PHY_HT_20_DS, 117000, /* 117 Mb */
+			98900, 0x8e, 0x00, 14,
+			8, 23, 3, 26, 43, 26, 44, 57890 },
+		{ TRUE_20, FALSE, WLAN_PHY_HT_20_DS, 130000, /* 130 Mb */
+			108300, 0x8f, 0x00, 15,
+			8, 25, 3, 27, 44, 27, 45, 64320 },
+		{ TRUE_40, TRUE_40, WLAN_PHY_HT_40_SS, 13500, /* 13.5 Mb */
+			13200, 0x80, 0x00, 0,
+			8, 2, 3, 12, 28, 28, 28, 6684 },
+		{ TRUE_40, TRUE_40, WLAN_PHY_HT_40_SS, 27500, /* 27.0 Mb */
+			25900, 0x81, 0x00, 1,
+			8, 4, 3, 13, 29, 29, 29, 13368 },
+		{ TRUE_40, TRUE_40, WLAN_PHY_HT_40_SS, 40500, /* 40.5 Mb */
+			38600, 0x82, 0x00, 2,
+			8, 6, 3, 14, 30, 30, 30, 20052 },
+		{ TRUE_40, TRUE_40, WLAN_PHY_HT_40_SS, 54000, /* 54 Mb */
+			49800, 0x83, 0x00, 3,
+			8, 10, 3, 15, 31, 31, 31, 26738 },
+		{ TRUE_40, TRUE_40, WLAN_PHY_HT_40_SS, 81500, /* 81 Mb */
+			72200, 0x84, 0x00, 4,
+			8, 14, 3, 16, 32, 32, 32, 40104 },
+		{ FALSE, TRUE_40, WLAN_PHY_HT_40_SS, 108000, /* 108 Mb */
+			92900, 0x85, 0x00, 5,
+			8, 20, 3, 17, 33, 33, 33, 53476 },
+		{ FALSE,  TRUE_40, WLAN_PHY_HT_40_SS, 121500, /* 121.5 Mb */
+			102700, 0x86, 0x00, 6,
+			8, 23, 3, 18, 34, 34, 34, 60156 },
+		{ FALSE, TRUE_40, WLAN_PHY_HT_40_SS, 135000, /* 135 Mb */
+			112000, 0x87, 0x00, 7,
+			8, 23, 3, 19, 35, 36, 36, 66840 },
+		{ FALSE, TRUE_40, WLAN_PHY_HT_40_SS_HGI, 150000, /* 150 Mb */
+			122000, 0x87, 0x00, 7,
+			8, 25, 3, 19, 35, 36, 36, 74200 },
+		{ FALSE, FALSE, WLAN_PHY_HT_40_DS, 27000, /* 27 Mb */
+			25800, 0x88, 0x00, 8,
+			8, 2, 3, 20, 37, 37, 37, 13360 },
+		{ FALSE, FALSE, WLAN_PHY_HT_40_DS, 54000, /* 54 Mb */
+			49800, 0x89, 0x00, 9,
+			8, 4, 3, 21, 38, 38, 38, 26720 },
+		{ FALSE, FALSE, WLAN_PHY_HT_40_DS, 81000, /* 81 Mb */
+			71900, 0x8a, 0x00, 10,
+			8, 6, 3, 22, 39, 39, 39, 40080 },
+		{ TRUE_40, FALSE, WLAN_PHY_HT_40_DS, 108000, /* 108 Mb */
+			92500, 0x8b, 0x00, 11,
+			8, 10, 3, 23, 40, 40, 40, 53440 },
+		{ TRUE_40, FALSE, WLAN_PHY_HT_40_DS, 162000, /* 162 Mb */
+			130300, 0x8c, 0x00, 12,
+			8, 14, 3, 24, 41, 41, 41, 80160 },
+		{ TRUE_40, FALSE, WLAN_PHY_HT_40_DS, 216000, /* 216 Mb */
+			162800, 0x8d, 0x00, 13,
+			8, 20, 3, 25, 42, 42, 42, 106880 },
+		{ TRUE_40, FALSE, WLAN_PHY_HT_40_DS, 243000, /* 243 Mb */
+			178200, 0x8e, 0x00, 14,
+			8, 23, 3, 26, 43, 43, 43, 120240 },
+		{ TRUE_40, FALSE, WLAN_PHY_HT_40_DS, 270000, /* 270 Mb */
+			192100, 0x8f, 0x00, 15,
+			8, 23, 3, 27, 44, 45, 45, 133600 },
+		{ TRUE_40, FALSE, WLAN_PHY_HT_40_DS_HGI, 300000, /* 300 Mb */
+			207000, 0x8f, 0x00, 15,
+			8, 25, 3, 27, 44, 45, 45, 148400 },
+		},
+	50,  /* probe interval */
+	50,  /* rssi reduce interval */
+	WLAN_RC_HT_FLAG,  /* Phy rates allowed initially */
+};
+
+static struct ath_rate_table ar5416_11a_ratetable = {
+	8,
+	{
+		{ TRUE, TRUE, WLAN_PHY_OFDM, 6000, /* 6 Mb */
+			5400, 0x0b, 0x00, (0x80|12),
+			0, 2, 1, 0, 0 },
+		{ TRUE, TRUE, WLAN_PHY_OFDM, 9000, /* 9 Mb */
+			7800, 0x0f, 0x00, 18,
+			0, 3, 1, 1, 0 },
+		{ TRUE, TRUE, WLAN_PHY_OFDM, 12000, /* 12 Mb */
+			10000, 0x0a, 0x00, (0x80|24),
+			2, 4, 2, 2, 0 },
+		{ TRUE, TRUE, WLAN_PHY_OFDM, 18000, /* 18 Mb */
+			13900, 0x0e, 0x00, 36,
+			2, 6, 2, 3, 0 },
+		{ TRUE, TRUE, WLAN_PHY_OFDM, 24000, /* 24 Mb */
+			17300, 0x09, 0x00, (0x80|48),
+			4, 10, 3, 4, 0 },
+		{ TRUE, TRUE, WLAN_PHY_OFDM, 36000, /* 36 Mb */
+			23000, 0x0d, 0x00, 72,
+			4, 14, 3, 5, 0 },
+		{ TRUE, TRUE, WLAN_PHY_OFDM, 48000, /* 48 Mb */
+			27400, 0x08, 0x00, 96,
+			4, 19, 3, 6, 0 },
+		{ TRUE, TRUE, WLAN_PHY_OFDM, 54000, /* 54 Mb */
+			29300, 0x0c, 0x00, 108,
+			4, 23, 3, 7, 0 },
+	},
+	50,  /* probe interval */
+	50,  /* rssi reduce interval */
+	0,   /* Phy rates allowed initially */
+};
+
+static struct ath_rate_table ar5416_11a_ratetable_Half = {
+	8,
+	{
+		{ TRUE, TRUE, WLAN_PHY_OFDM, 3000, /* 6 Mb */
+			2700, 0x0b, 0x00, (0x80|6),
+			0, 2,  1, 0, 0},
+		{ TRUE, TRUE,  WLAN_PHY_OFDM, 4500, /* 9 Mb */
+			3900, 0x0f, 0x00, 9,
+			0, 3, 1, 1, 0 },
+		{ TRUE, TRUE, WLAN_PHY_OFDM, 6000, /* 12 Mb */
+			5000, 0x0a, 0x00, (0x80|12),
+			2, 4, 2, 2, 0 },
+		{ TRUE, TRUE, WLAN_PHY_OFDM, 9000, /* 18 Mb */
+			6950, 0x0e, 0x00, 18,
+			2, 6, 2, 3, 0 },
+		{ TRUE, TRUE, WLAN_PHY_OFDM, 12000, /* 24 Mb */
+			8650, 0x09, 0x00, (0x80|24),
+			4, 10, 3, 4, 0 },
+		{ TRUE, TRUE, WLAN_PHY_OFDM, 18000, /* 36 Mb */
+			11500, 0x0d, 0x00, 36,
+			4, 14, 3, 5, 0 },
+		{ TRUE, TRUE, WLAN_PHY_OFDM, 24000, /* 48 Mb */
+			13700, 0x08, 0x00, 48,
+			4, 19, 3, 6, 0 },
+		{ TRUE, TRUE, WLAN_PHY_OFDM, 27000, /* 54 Mb */
+			14650, 0x0c, 0x00, 54,
+			4, 23, 3, 7, 0 },
+	},
+	50,  /* probe interval */
+	50,  /* rssi reduce interval */
+	0,   /* Phy rates allowed initially */
+};
+
+static struct ath_rate_table ar5416_11a_ratetable_Quarter = {
+	8,
+	{
+		{ TRUE, TRUE, WLAN_PHY_OFDM, 1500, /* 6 Mb */
+			1350, 0x0b, 0x00, (0x80|3),
+			0, 2, 1, 0, 0 },
+		{ TRUE, TRUE, WLAN_PHY_OFDM, 2250, /* 9 Mb */
+			1950, 0x0f, 0x00, 4,
+			0, 3, 1, 1, 0 },
+		{ TRUE, TRUE, WLAN_PHY_OFDM, 3000, /* 12 Mb */
+			2500, 0x0a, 0x00, (0x80|6),
+			2, 4, 2, 2, 0 },
+		{ TRUE, TRUE, WLAN_PHY_OFDM, 4500, /* 18 Mb */
+			3475, 0x0e, 0x00, 9,
+			2, 6, 2, 3, 0 },
+		{ TRUE, TRUE, WLAN_PHY_OFDM, 6000, /* 25 Mb */
+			4325, 0x09, 0x00, (0x80|12),
+			4, 10, 3, 4, 0 },
+		{ TRUE, TRUE, WLAN_PHY_OFDM, 9000, /* 36 Mb */
+			5750, 0x0d, 0x00, 18,
+			4, 14, 3, 5, 0 },
+		{ TRUE, TRUE, WLAN_PHY_OFDM, 12000, /* 48 Mb */
+			6850, 0x08, 0x00, 24,
+			4, 19, 3, 6, 0 },
+		{ TRUE, TRUE, WLAN_PHY_OFDM, 13500, /* 54 Mb */
+			7325, 0x0c, 0x00, 27,
+			4, 23, 3, 7, 0 },
+	},
+	50,  /* probe interval */
+	50,  /* rssi reduce interval */
+	0,   /* Phy rates allowed initially */
+};
+
+static struct ath_rate_table ar5416_11g_ratetable = {
+	12,
+	{
+		{ TRUE, TRUE, WLAN_PHY_CCK, 1000, /* 1 Mb */
+			900, 0x1b, 0x00, 2,
+			0, 0, 1, 0, 0 },
+		{ TRUE, TRUE, WLAN_PHY_CCK, 2000, /* 2 Mb */
+			1900, 0x1a, 0x04, 4,
+			1, 1, 1, 1, 0 },
+		{ TRUE, TRUE, WLAN_PHY_CCK, 5500, /* 5.5 Mb */
+			4900, 0x19, 0x04, 11,
+			2, 2, 2, 2, 0 },
+		{ TRUE, TRUE, WLAN_PHY_CCK, 11000, /* 11 Mb */
+			8100, 0x18, 0x04, 22,
+			3, 3, 2, 3, 0 },
+		{ FALSE, FALSE, WLAN_PHY_OFDM, 6000, /* 6 Mb */
+			5400, 0x0b, 0x00, 12,
+			4, 2, 1, 4, 0 },
+		{ FALSE, FALSE, WLAN_PHY_OFDM, 9000, /* 9 Mb */
+			7800, 0x0f, 0x00, 18,
+			4, 3, 1, 5, 0 },
+		{ TRUE, TRUE, WLAN_PHY_OFDM, 12000, /* 12 Mb */
+			10000, 0x0a, 0x00, 24,
+			6, 4, 1, 6, 0 },
+		{ TRUE, TRUE, WLAN_PHY_OFDM, 18000, /* 18 Mb */
+			13900, 0x0e, 0x00, 36,
+			6, 6, 2, 7, 0 },
+		{ TRUE, TRUE, WLAN_PHY_OFDM, 24000, /* 24 Mb */
+			17300, 0x09, 0x00, 48,
+			8, 10, 3, 8, 0 },
+		{ TRUE, TRUE, WLAN_PHY_OFDM, 36000, /* 36 Mb */
+			23000, 0x0d, 0x00, 72,
+			8, 14, 3, 9, 0 },
+		{ TRUE, TRUE, WLAN_PHY_OFDM, 48000, /* 48 Mb */
+			27400, 0x08, 0x00, 96,
+			8, 19, 3, 10, 0 },
+		{ TRUE, TRUE, WLAN_PHY_OFDM, 54000, /* 54 Mb */
+			29300, 0x0c, 0x00, 108,
+			8, 23, 3, 11, 0 },
+	},
+	50,  /* probe interval */
+	50,  /* rssi reduce interval */
+	0,   /* Phy rates allowed initially */
+};
+
+static struct ath_rate_table ar5416_11b_ratetable = {
+	4,
+	{
+		{ TRUE, TRUE, WLAN_PHY_CCK, 1000, /* 1 Mb */
+			900, 0x1b,  0x00, (0x80|2),
+			0, 0, 1, 0, 0 },
+		{ TRUE, TRUE, WLAN_PHY_CCK, 2000, /* 2 Mb */
+			1800, 0x1a, 0x04, (0x80|4),
+			1, 1, 1, 1, 0 },
+		{ TRUE, TRUE, WLAN_PHY_CCK, 5500, /* 5.5 Mb */
+			4300, 0x19, 0x04, (0x80|11),
+			1, 2, 2, 2, 0 },
+		{ TRUE, TRUE, WLAN_PHY_CCK, 11000, /* 11 Mb */
+			7100, 0x18, 0x04, (0x80|22),
+			1, 4, 100, 3, 0 },
+	},
+	100, /* probe interval */
+	100, /* rssi reduce interval */
+	0,   /* Phy rates allowed initially */
+};
+
+static void ar5416_attach_ratetables(struct ath_rate_softc *sc)
+{
+	/*
+	 * Attach rate tables.
+	 */
+	sc->hw_rate_table[ATH9K_MODE_11B] = &ar5416_11b_ratetable;
+	sc->hw_rate_table[ATH9K_MODE_11A] = &ar5416_11a_ratetable;
+	sc->hw_rate_table[ATH9K_MODE_11G] = &ar5416_11g_ratetable;
+
+	sc->hw_rate_table[ATH9K_MODE_11NA_HT20] = &ar5416_11na_ratetable;
+	sc->hw_rate_table[ATH9K_MODE_11NG_HT20] = &ar5416_11ng_ratetable;
+	sc->hw_rate_table[ATH9K_MODE_11NA_HT40PLUS] =
+		&ar5416_11na_ratetable;
+	sc->hw_rate_table[ATH9K_MODE_11NA_HT40MINUS] =
+		&ar5416_11na_ratetable;
+	sc->hw_rate_table[ATH9K_MODE_11NG_HT40PLUS] =
+		&ar5416_11ng_ratetable;
+	sc->hw_rate_table[ATH9K_MODE_11NG_HT40MINUS] =
+		&ar5416_11ng_ratetable;
+}
+
+static void ar5416_setquarter_ratetable(struct ath_rate_softc *sc)
+{
+	sc->hw_rate_table[ATH9K_MODE_11A] = &ar5416_11a_ratetable_Quarter;
+	return;
+}
+
+static void ar5416_sethalf_ratetable(struct ath_rate_softc *sc)
+{
+	sc->hw_rate_table[ATH9K_MODE_11A] = &ar5416_11a_ratetable_Half;
+	return;
+}
+
+static void ar5416_setfull_ratetable(struct ath_rate_softc *sc)
+{
+	sc->hw_rate_table[ATH9K_MODE_11A] = &ar5416_11a_ratetable;
+	return;
+}
+
+/*
+ * Return the median of three numbers
+ */
+static inline int8_t median(int8_t a, int8_t b, int8_t c)
+{
+	if (a >= b) {
+		if (b >= c)
+			return b;
+		else if (a > c)
+			return c;
+		else
+			return a;
+	} else {
+		if (a >= c)
+			return a;
+		else if (b >= c)
+			return c;
+		else
+			return b;
+	}
+}
+
+static void ath_rc_sort_validrates(const struct ath_rate_table *rate_table,
+				   struct ath_tx_ratectrl *rate_ctrl)
+{
+	u8 i, j, idx, idx_next;
+
+	for (i = rate_ctrl->max_valid_rate - 1; i > 0; i--) {
+		for (j = 0; j <= i-1; j++) {
+			idx = rate_ctrl->valid_rate_index[j];
+			idx_next = rate_ctrl->valid_rate_index[j+1];
+
+			if (rate_table->info[idx].ratekbps >
+				rate_table->info[idx_next].ratekbps) {
+				rate_ctrl->valid_rate_index[j] = idx_next;
+				rate_ctrl->valid_rate_index[j+1] = idx;
+			}
+		}
+	}
+}
+
+/* Access functions for valid_txrate_mask */
+
+static void ath_rc_init_valid_txmask(struct ath_tx_ratectrl *rate_ctrl)
+{
+	u8 i;
+
+	for (i = 0; i < rate_ctrl->rate_table_size; i++)
+		rate_ctrl->valid_rate_index[i] = FALSE;
+}
+
+static inline void ath_rc_set_valid_txmask(struct ath_tx_ratectrl *rate_ctrl,
+					   u8 index, int valid_tx_rate)
+{
+	ASSERT(index <= rate_ctrl->rate_table_size);
+	rate_ctrl->valid_rate_index[index] = valid_tx_rate ? TRUE : FALSE;
+}
+
+static inline int ath_rc_isvalid_txmask(struct ath_tx_ratectrl *rate_ctrl,
+					u8 index)
+{
+	ASSERT(index <= rate_ctrl->rate_table_size);
+	return rate_ctrl->valid_rate_index[index];
+}
+
+/* Iterators for valid_txrate_mask */
+static inline int
+ath_rc_get_nextvalid_txrate(const struct ath_rate_table *rate_table,
+			    struct ath_tx_ratectrl *rate_ctrl,
+			    u8 cur_valid_txrate,
+			    u8 *next_idx)
+{
+	u8 i;
+
+	for (i = 0; i < rate_ctrl->max_valid_rate - 1; i++) {
+		if (rate_ctrl->valid_rate_index[i] == cur_valid_txrate) {
+			*next_idx = rate_ctrl->valid_rate_index[i+1];
+			return TRUE;
+		}
+	}
+
+	/* No more valid rates */
+	*next_idx = 0;
+	return FALSE;
+}
+
+/* Return true only for single stream */
+
+static int ath_rc_valid_phyrate(u32 phy, u32 capflag, int ignore_cw)
+{
+	if (WLAN_RC_PHY_HT(phy) & !(capflag & WLAN_RC_HT_FLAG))
+		return FALSE;
+	if (WLAN_RC_PHY_DS(phy) && !(capflag & WLAN_RC_DS_FLAG))
+		return FALSE;
+	if (WLAN_RC_PHY_SGI(phy) && !(capflag & WLAN_RC_SGI_FLAG))
+		return FALSE;
+	if (!ignore_cw && WLAN_RC_PHY_HT(phy))
+		if (WLAN_RC_PHY_40(phy) && !(capflag & WLAN_RC_40_FLAG))
+			return FALSE;
+		if (!WLAN_RC_PHY_40(phy) && (capflag & WLAN_RC_40_FLAG))
+			return FALSE;
+	return TRUE;
+}
+
+static inline int
+ath_rc_get_nextlowervalid_txrate(const struct ath_rate_table *rate_table,
+				 struct ath_tx_ratectrl *rate_ctrl,
+				 u8 cur_valid_txrate, u8 *next_idx)
+{
+	int8_t i;
+
+	for (i = 1; i < rate_ctrl->max_valid_rate ; i++) {
+		if (rate_ctrl->valid_rate_index[i] == cur_valid_txrate) {
+			*next_idx = rate_ctrl->valid_rate_index[i-1];
+			return TRUE;
+		}
+	}
+	return FALSE;
+}
+
+/*
+ * Initialize the Valid Rate Index from valid entries in Rate Table
+ */
+static u8
+ath_rc_sib_init_validrates(struct ath_rate_node *ath_rc_priv,
+			   const struct ath_rate_table *rate_table,
+			   u32 capflag)
+{
+	struct ath_tx_ratectrl *rate_ctrl;
+	u8 i, hi = 0;
+	u32 valid;
+
+	rate_ctrl = (struct ath_tx_ratectrl *)(ath_rc_priv);
+	for (i = 0; i < rate_table->rate_cnt; i++) {
+		valid = (ath_rc_priv->single_stream ?
+				rate_table->info[i].valid_single_stream :
+				rate_table->info[i].valid);
+		if (valid == TRUE) {
+			u32 phy = rate_table->info[i].phy;
+			u8 valid_rate_count = 0;
+
+			if (!ath_rc_valid_phyrate(phy, capflag, FALSE))
+				continue;
+
+			valid_rate_count = rate_ctrl->valid_phy_ratecnt[phy];
+
+			rate_ctrl->valid_phy_rateidx[phy][valid_rate_count] = i;
+			rate_ctrl->valid_phy_ratecnt[phy] += 1;
+			ath_rc_set_valid_txmask(rate_ctrl, i, TRUE);
+			hi = A_MAX(hi, i);
+		}
+	}
+	return hi;
+}
+
+/*
+ * Initialize the Valid Rate Index from Rate Set
+ */
+static u8
+ath_rc_sib_setvalid_rates(struct ath_rate_node *ath_rc_priv,
+			  const struct ath_rate_table *rate_table,
+			  struct ath_rateset *rateset,
+			  u32 capflag)
+{
+	/* XXX: Clean me up and make identation friendly */
+	u8 i, j, hi = 0;
+	struct ath_tx_ratectrl *rate_ctrl =
+		(struct ath_tx_ratectrl *)(ath_rc_priv);
+
+	/* Use intersection of working rates and valid rates */
+	for (i = 0; i < rateset->rs_nrates; i++) {
+		for (j = 0; j < rate_table->rate_cnt; j++) {
+			u32 phy = rate_table->info[j].phy;
+			u32 valid = (ath_rc_priv->single_stream ?
+				rate_table->info[j].valid_single_stream :
+				rate_table->info[j].valid);
+
+			/* We allow a rate only if its valid and the
+			 * capflag matches one of the validity
+			 * (TRUE/TRUE_20/TRUE_40) flags */
+
+			/* XXX: catch the negative of this branch
+			 * first and then continue */
+			if (((rateset->rs_rates[i] & 0x7F) ==
+				(rate_table->info[j].dot11rate & 0x7F)) &&
+				((valid & WLAN_RC_CAP_MODE(capflag)) ==
+				WLAN_RC_CAP_MODE(capflag)) &&
+				!WLAN_RC_PHY_HT(phy)) {
+
+				u8 valid_rate_count = 0;
+
+				if (!ath_rc_valid_phyrate(phy, capflag, FALSE))
+					continue;
+
+				valid_rate_count =
+					rate_ctrl->valid_phy_ratecnt[phy];
+
+				rate_ctrl->valid_phy_rateidx[phy]
+					[valid_rate_count] = j;
+				rate_ctrl->valid_phy_ratecnt[phy] += 1;
+				ath_rc_set_valid_txmask(rate_ctrl, j, TRUE);
+				hi = A_MAX(hi, j);
+			}
+		}
+	}
+	return hi;
+}
+
+static u8
+ath_rc_sib_setvalid_htrates(struct ath_rate_node *ath_rc_priv,
+			    const struct ath_rate_table *rate_table,
+			    u8 *mcs_set, u32 capflag)
+{
+	u8 i, j, hi = 0;
+	struct ath_tx_ratectrl *rate_ctrl =
+		(struct ath_tx_ratectrl *)(ath_rc_priv);
+
+	/* Use intersection of working rates and valid rates */
+	for (i = 0; i <  ((struct ath_rateset *)mcs_set)->rs_nrates; i++) {
+		for (j = 0; j < rate_table->rate_cnt; j++) {
+			u32 phy = rate_table->info[j].phy;
+			u32 valid = (ath_rc_priv->single_stream ?
+				rate_table->info[j].valid_single_stream :
+				rate_table->info[j].valid);
+
+			if (((((struct ath_rateset *)
+				mcs_set)->rs_rates[i] & 0x7F) !=
+				(rate_table->info[j].dot11rate & 0x7F)) ||
+					!WLAN_RC_PHY_HT(phy) ||
+					!WLAN_RC_PHY_HT_VALID(valid, capflag))
+				continue;
+
+			if (!ath_rc_valid_phyrate(phy, capflag, FALSE))
+				continue;
+
+			rate_ctrl->valid_phy_rateidx[phy]
+				[rate_ctrl->valid_phy_ratecnt[phy]] = j;
+			rate_ctrl->valid_phy_ratecnt[phy] += 1;
+			ath_rc_set_valid_txmask(rate_ctrl, j, TRUE);
+			hi = A_MAX(hi, j);
+		}
+	}
+	return hi;
+}
+
+/*
+ * Attach to a device instance.  Setup the public definition
+ * of how much per-node space we need and setup the private
+ * phy tables that have rate control parameters.
+ */
+struct ath_rate_softc *ath_rate_attach(struct ath_hal *ah)
+{
+	struct ath_rate_softc *asc;
+
+	/* we are only in user context so we can sleep for memory */
+	asc = kzalloc(sizeof(struct ath_rate_softc), GFP_KERNEL);
+	if (asc == NULL)
+		return NULL;
+
+	ar5416_attach_ratetables(asc);
+
+	/* Save Maximum TX Trigger Level (used for 11n) */
+	tx_triglevel_max = ah->ah_caps.tx_triglevel_max;
+	/*  return alias for ath_rate_softc * */
+	return asc;
+}
+
+static struct ath_rate_node *ath_rate_node_alloc(struct ath_vap *avp,
+						 struct ath_rate_softc *rsc,
+						 gfp_t gfp)
+{
+	struct ath_rate_node *anode;
+
+	anode = kzalloc(sizeof(struct ath_rate_node), gfp);
+	if (anode == NULL)
+		return NULL;
+
+	anode->avp = avp;
+	anode->asc = rsc;
+	avp->rc_node = anode;
+
+	return anode;
+}
+
+static void ath_rate_node_free(struct ath_rate_node *anode)
+{
+	if (anode != NULL)
+		kfree(anode);
+}
+
+void ath_rate_detach(struct ath_rate_softc *asc)
+{
+	if (asc != NULL)
+		kfree(asc);
+}
+
+u8 ath_rate_findrateix(struct ath_softc *sc,
+			     u8 dot11rate)
+{
+	const struct ath_rate_table *ratetable;
+	struct ath_rate_softc *rsc = sc->sc_rc;
+	int i;
+
+	ratetable = rsc->hw_rate_table[sc->sc_curmode];
+
+	if (WARN_ON(!ratetable))
+		return 0;
+
+	for (i = 0; i < ratetable->rate_cnt; i++) {
+		if ((ratetable->info[i].dot11rate & 0x7f) == (dot11rate & 0x7f))
+			return i;
+	}
+
+	return 0;
+}
+
+/*
+ * Update rate-control state on a device state change.  When
+ * operating as a station this includes associate/reassociate
+ * with an AP.  Otherwise this gets called, for example, when
+ * the we transition to run state when operating as an AP.
+ */
+void ath_rate_newstate(struct ath_softc *sc, struct ath_vap *avp)
+{
+	struct ath_rate_softc *asc = sc->sc_rc;
+
+	/* For half and quarter rate channles use different
+	 * rate tables
+	 */
+	if (sc->sc_curchan.channelFlags & CHANNEL_HALF)
+		ar5416_sethalf_ratetable(asc);
+	else if (sc->sc_curchan.channelFlags & CHANNEL_QUARTER)
+		ar5416_setquarter_ratetable(asc);
+	else /* full rate */
+		ar5416_setfull_ratetable(asc);
+
+	if (avp->av_config.av_fixed_rateset != IEEE80211_FIXED_RATE_NONE) {
+		asc->fixedrix =
+			sc->sc_rixmap[avp->av_config.av_fixed_rateset & 0xff];
+		/* NB: check the fixed rate exists */
+		if (asc->fixedrix == 0xff)
+			asc->fixedrix = IEEE80211_FIXED_RATE_NONE;
+	} else {
+		asc->fixedrix = IEEE80211_FIXED_RATE_NONE;
+	}
+}
+
+static u8 ath_rc_ratefind_ht(struct ath_softc *sc,
+				   struct ath_rate_node *ath_rc_priv,
+				   const struct ath_rate_table *rate_table,
+				   int probe_allowed, int *is_probing,
+				   int is_retry)
+{
+	u32 dt, best_thruput, this_thruput, now_msec;
+	u8 rate, next_rate, best_rate, maxindex, minindex;
+	int8_t  rssi_last, rssi_reduce = 0, index = 0;
+	struct ath_tx_ratectrl  *rate_ctrl = NULL;
+
+	rate_ctrl = (struct ath_tx_ratectrl *)(ath_rc_priv ?
+					       (ath_rc_priv) : NULL);
+
+	*is_probing = FALSE;
+
+	rssi_last = median(rate_ctrl->rssi_last,
+			   rate_ctrl->rssi_last_prev,
+			   rate_ctrl->rssi_last_prev2);
+
+	/*
+	 * Age (reduce) last ack rssi based on how old it is.
+	 * The bizarre numbers are so the delta is 160msec,
+	 * meaning we divide by 16.
+	 *   0msec   <= dt <= 25msec:   don't derate
+	 *   25msec  <= dt <= 185msec:  derate linearly from 0 to 10dB
+	 *   185msec <= dt:             derate by 10dB
+	 */
+
+	now_msec = jiffies_to_msecs(jiffies);
+	dt = now_msec - rate_ctrl->rssi_time;
+
+	if (dt >= 185)
+		rssi_reduce = 10;
+	else if (dt >= 25)
+		rssi_reduce = (u8)((dt - 25) >> 4);
+
+	/* Now reduce rssi_last by rssi_reduce */
+	if (rssi_last < rssi_reduce)
+		rssi_last = 0;
+	else
+		rssi_last -= rssi_reduce;
+
+	/*
+	 * Now look up the rate in the rssi table and return it.
+	 * If no rates match then we return 0 (lowest rate)
+	 */
+
+	best_thruput = 0;
+	maxindex = rate_ctrl->max_valid_rate-1;
+
+	minindex = 0;
+	best_rate = minindex;
+
+	/*
+	 * Try the higher rate first. It will reduce memory moving time
+	 * if we have very good channel characteristics.
+	 */
+	for (index = maxindex; index >= minindex ; index--) {
+		u8 per_thres;
+
+		rate = rate_ctrl->valid_rate_index[index];
+		if (rate > rate_ctrl->rate_max_phy)
+			continue;
+
+		/*
+		 * For TCP the average collision rate is around 11%,
+		 * so we ignore PERs less than this.  This is to
+		 * prevent the rate we are currently using (whose
+		 * PER might be in the 10-15 range because of TCP
+		 * collisions) looking worse than the next lower
+		 * rate whose PER has decayed close to 0.  If we
+		 * used to next lower rate, its PER would grow to
+		 * 10-15 and we would be worse off then staying
+		 * at the current rate.
+		 */
+		per_thres = rate_ctrl->state[rate].per;
+		if (per_thres < 12)
+			per_thres = 12;
+
+		this_thruput = rate_table->info[rate].user_ratekbps *
+			(100 - per_thres);
+
+		if (best_thruput <= this_thruput) {
+			best_thruput = this_thruput;
+			best_rate    = rate;
+		}
+	}
+
+	rate = best_rate;
+
+	/* if we are retrying for more than half the number
+	 * of max retries, use the min rate for the next retry
+	 */
+	if (is_retry)
+		rate = rate_ctrl->valid_rate_index[minindex];
+
+	rate_ctrl->rssi_last_lookup = rssi_last;
+
+	/*
+	 * Must check the actual rate (ratekbps) to account for
+	 * non-monoticity of 11g's rate table
+	 */
+
+	if (rate >= rate_ctrl->rate_max_phy && probe_allowed) {
+		rate = rate_ctrl->rate_max_phy;
+
+		/* Probe the next allowed phy state */
+		/* FIXME:XXXX Check to make sure ratMax is checked properly */
+		if (ath_rc_get_nextvalid_txrate(rate_table,
+						rate_ctrl, rate, &next_rate) &&
+		    (now_msec - rate_ctrl->probe_time >
+		     rate_table->probe_interval) &&
+		    (rate_ctrl->hw_maxretry_pktcnt >= 1)) {
+			rate = next_rate;
+			rate_ctrl->probe_rate = rate;
+			rate_ctrl->probe_time = now_msec;
+			rate_ctrl->hw_maxretry_pktcnt = 0;
+			*is_probing = TRUE;
+		}
+	}
+
+	/*
+	 * Make sure rate is not higher than the allowed maximum.
+	 * We should also enforce the min, but I suspect the min is
+	 * normally 1 rather than 0 because of the rate 9 vs 6 issue
+	 * in the old code.
+	 */
+	if (rate > (rate_ctrl->rate_table_size - 1))
+		rate = rate_ctrl->rate_table_size - 1;
+
+	ASSERT((rate_table->info[rate].valid && !ath_rc_priv->single_stream) ||
+		(rate_table->info[rate].valid_single_stream &&
+			ath_rc_priv->single_stream));
+
+	return rate;
+}
+
+static void ath_rc_rate_set_series(const struct ath_rate_table *rate_table ,
+				   struct ath_rc_series *series,
+				   u8 tries,
+				   u8 rix,
+				   int rtsctsenable)
+{
+	series->tries = tries;
+	series->flags = (rtsctsenable ? ATH_RC_RTSCTS_FLAG : 0) |
+		(WLAN_RC_PHY_DS(rate_table->info[rix].phy) ?
+		 ATH_RC_DS_FLAG : 0) |
+		(WLAN_RC_PHY_40(rate_table->info[rix].phy) ?
+		 ATH_RC_CW40_FLAG : 0) |
+		(WLAN_RC_PHY_SGI(rate_table->info[rix].phy) ?
+		 ATH_RC_SGI_FLAG : 0);
+
+	series->rix = rate_table->info[rix].base_index;
+	series->max_4ms_framelen = rate_table->info[rix].max_4ms_framelen;
+}
+
+static u8 ath_rc_rate_getidx(struct ath_softc *sc,
+				   struct ath_rate_node *ath_rc_priv,
+				   const struct ath_rate_table *rate_table,
+				   u8 rix, u16 stepdown,
+				   u16 min_rate)
+{
+	u32 j;
+	u8 nextindex;
+	struct ath_tx_ratectrl *rate_ctrl =
+		(struct ath_tx_ratectrl *)(ath_rc_priv);
+
+	if (min_rate) {
+		for (j = RATE_TABLE_SIZE; j > 0; j--) {
+			if (ath_rc_get_nextlowervalid_txrate(rate_table,
+						rate_ctrl, rix, &nextindex))
+				rix = nextindex;
+			else
+				break;
+		}
+	} else {
+		for (j = stepdown; j > 0; j--) {
+			if (ath_rc_get_nextlowervalid_txrate(rate_table,
+						rate_ctrl, rix, &nextindex))
+				rix = nextindex;
+			else
+				break;
+		}
+	}
+	return rix;
+}
+
+static void ath_rc_ratefind(struct ath_softc *sc,
+			    struct ath_rate_node *ath_rc_priv,
+			    int num_tries, int num_rates, unsigned int rcflag,
+			    struct ath_rc_series series[], int *is_probe,
+			    int is_retry)
+{
+	u8 try_per_rate = 0, i = 0, rix, nrix;
+	struct ath_rate_softc  *asc = (struct ath_rate_softc *)sc->sc_rc;
+	struct ath_rate_table *rate_table;
+
+	rate_table =
+		(struct ath_rate_table *)asc->hw_rate_table[sc->sc_curmode];
+	rix = ath_rc_ratefind_ht(sc, ath_rc_priv, rate_table,
+				(rcflag & ATH_RC_PROBE_ALLOWED) ? 1 : 0,
+				is_probe, is_retry);
+	nrix = rix;
+
+	if ((rcflag & ATH_RC_PROBE_ALLOWED) && (*is_probe)) {
+		/* set one try for probe rates. For the
+		 * probes don't enable rts */
+		ath_rc_rate_set_series(rate_table,
+			&series[i++], 1, nrix, FALSE);
+
+		try_per_rate = (num_tries/num_rates);
+		/* Get the next tried/allowed rate. No RTS for the next series
+		 * after the probe rate
+		 */
+		nrix = ath_rc_rate_getidx(sc,
+			ath_rc_priv, rate_table, nrix, 1, FALSE);
+		ath_rc_rate_set_series(rate_table,
+			&series[i++], try_per_rate, nrix, 0);
+	} else {
+		try_per_rate = (num_tries/num_rates);
+		/* Set the choosen rate. No RTS for first series entry. */
+		ath_rc_rate_set_series(rate_table,
+			&series[i++], try_per_rate, nrix, FALSE);
+	}
+
+	/* Fill in the other rates for multirate retry */
+	for ( ; i < num_rates; i++) {
+		u8 try_num;
+		u8 min_rate;
+
+		try_num = ((i + 1) == num_rates) ?
+			num_tries - (try_per_rate * i) : try_per_rate ;
+		min_rate = (((i + 1) == num_rates) &&
+			(rcflag & ATH_RC_MINRATE_LASTRATE)) ? 1 : 0;
+
+		nrix = ath_rc_rate_getidx(sc, ath_rc_priv,
+			rate_table, nrix, 1, min_rate);
+		/* All other rates in the series have RTS enabled */
+		ath_rc_rate_set_series(rate_table,
+			&series[i], try_num, nrix, TRUE);
+	}
+
+	/*
+	 * NB:Change rate series to enable aggregation when operating
+	 * at lower MCS rates. When first rate in series is MCS2
+	 * in HT40 @ 2.4GHz, series should look like:
+	 *
+	 * {MCS2, MCS1, MCS0, MCS0}.
+	 *
+	 * When first rate in series is MCS3 in HT20 @ 2.4GHz, series should
+	 * look like:
+	 *
+	 * {MCS3, MCS2, MCS1, MCS1}
+	 *
+	 * So, set fourth rate in series to be same as third one for
+	 * above conditions.
+	 */
+	if ((sc->sc_curmode == ATH9K_MODE_11NG_HT20) ||
+			(sc->sc_curmode == ATH9K_MODE_11NG_HT40PLUS) ||
+			(sc->sc_curmode == ATH9K_MODE_11NG_HT40MINUS)) {
+		u8  dot11rate = rate_table->info[rix].dot11rate;
+		u8 phy = rate_table->info[rix].phy;
+		if (i == 4 &&
+		    ((dot11rate == 2 && phy == WLAN_RC_PHY_HT_40_SS) ||
+		    (dot11rate == 3 && phy == WLAN_RC_PHY_HT_20_SS))) {
+			series[3].rix = series[2].rix;
+			series[3].flags = series[2].flags;
+			series[3].max_4ms_framelen = series[2].max_4ms_framelen;
+		}
+	}
+}
+
+/*
+ * Return the Tx rate series.
+ */
+void ath_rate_findrate(struct ath_softc *sc,
+		       struct ath_rate_node *ath_rc_priv,
+		       int num_tries,
+		       int num_rates,
+		       unsigned int rcflag,
+		       struct ath_rc_series series[],
+		       int *is_probe,
+		       int is_retry)
+{
+	struct ath_vap *avp = ath_rc_priv->avp;
+
+	DPRINTF(sc, ATH_DBG_RATE, "%s", __func__);
+	if (!num_rates || !num_tries)
+		return;
+
+	if (avp->av_config.av_fixed_rateset == IEEE80211_FIXED_RATE_NONE) {
+		ath_rc_ratefind(sc, ath_rc_priv, num_tries, num_rates,
+				rcflag, series, is_probe, is_retry);
+	} else {
+		/* Fixed rate */
+		int idx;
+		u8 flags;
+		u32 rix;
+		struct ath_rate_softc *asc = ath_rc_priv->asc;
+		struct ath_rate_table *rate_table;
+
+		rate_table = (struct ath_rate_table *)
+			asc->hw_rate_table[sc->sc_curmode];
+
+		for (idx = 0; idx < 4; idx++) {
+			unsigned int    mcs;
+			u8 series_rix = 0;
+
+			series[idx].tries =
+				IEEE80211_RATE_IDX_ENTRY(
+					avp->av_config.av_fixed_retryset, idx);
+
+			mcs = IEEE80211_RATE_IDX_ENTRY(
+				avp->av_config.av_fixed_rateset, idx);
+
+			if (idx == 3 && (mcs & 0xf0) == 0x70)
+				mcs = (mcs & ~0xf0)|0x80;
+
+			if (!(mcs & 0x80))
+				flags = 0;
+			else
+				flags = ((ath_rc_priv->ht_cap &
+						WLAN_RC_DS_FLAG) ?
+						ATH_RC_DS_FLAG : 0) |
+					((ath_rc_priv->ht_cap &
+						WLAN_RC_40_FLAG) ?
+						ATH_RC_CW40_FLAG : 0) |
+					((ath_rc_priv->ht_cap &
+						WLAN_RC_SGI_FLAG) ?
+					((ath_rc_priv->ht_cap &
+						WLAN_RC_40_FLAG) ?
+						ATH_RC_SGI_FLAG : 0) : 0);
+
+			series[idx].rix = sc->sc_rixmap[mcs];
+			series_rix  = series[idx].rix;
+
+			/* XXX: Give me some cleanup love */
+			if ((flags & ATH_RC_CW40_FLAG) &&
+				(flags & ATH_RC_SGI_FLAG))
+				rix = rate_table->info[series_rix].ht_index;
+			else if (flags & ATH_RC_SGI_FLAG)
+				rix = rate_table->info[series_rix].sgi_index;
+			else if (flags & ATH_RC_CW40_FLAG)
+				rix = rate_table->info[series_rix].cw40index;
+			else
+				rix = rate_table->info[series_rix].base_index;
+			series[idx].max_4ms_framelen =
+				rate_table->info[rix].max_4ms_framelen;
+			series[idx].flags = flags;
+		}
+	}
+}
+
+static void ath_rc_update_ht(struct ath_softc *sc,
+			     struct ath_rate_node *ath_rc_priv,
+			     struct ath_tx_info_priv *info_priv,
+			     int tx_rate, int xretries, int retries)
+{
+	struct ath_tx_ratectrl *rate_ctrl;
+	u32 now_msec = jiffies_to_msecs(jiffies);
+	int state_change = FALSE, rate, count;
+	u8 last_per;
+	struct ath_rate_softc  *asc = (struct ath_rate_softc *)sc->sc_rc;
+	struct ath_rate_table *rate_table =
+		(struct ath_rate_table *)asc->hw_rate_table[sc->sc_curmode];
+
+	static u32 nretry_to_per_lookup[10] = {
+		100 * 0 / 1,
+		100 * 1 / 4,
+		100 * 1 / 2,
+		100 * 3 / 4,
+		100 * 4 / 5,
+		100 * 5 / 6,
+		100 * 6 / 7,
+		100 * 7 / 8,
+		100 * 8 / 9,
+		100 * 9 / 10
+	};
+
+	if (!ath_rc_priv)
+		return;
+
+	rate_ctrl = (struct ath_tx_ratectrl *)(ath_rc_priv);
+
+	ASSERT(tx_rate >= 0);
+	if (tx_rate < 0)
+		return;
+
+	/* To compensate for some imbalance between ctrl and ext. channel */
+
+	if (WLAN_RC_PHY_40(rate_table->info[tx_rate].phy))
+		info_priv->tx.ts_rssi =
+			info_priv->tx.ts_rssi < 3 ? 0 :
+			info_priv->tx.ts_rssi - 3;
+
+	last_per = rate_ctrl->state[tx_rate].per;
+
+	if (xretries) {
+		/* Update the PER. */
+		if (xretries == 1) {
+			rate_ctrl->state[tx_rate].per += 30;
+			if (rate_ctrl->state[tx_rate].per > 100)
+				rate_ctrl->state[tx_rate].per = 100;
+		} else {
+			/* xretries == 2 */
+			count = sizeof(nretry_to_per_lookup) /
+					sizeof(nretry_to_per_lookup[0]);
+			if (retries >= count)
+				retries = count - 1;
+			/* new_PER = 7/8*old_PER + 1/8*(currentPER) */
+			rate_ctrl->state[tx_rate].per =
+				(u8)(rate_ctrl->state[tx_rate].per -
+				(rate_ctrl->state[tx_rate].per >> 3) +
+				((100) >> 3));
+		}
+
+		/* xretries == 1 or 2 */
+
+		if (rate_ctrl->probe_rate == tx_rate)
+			rate_ctrl->probe_rate = 0;
+
+	} else {	/* xretries == 0 */
+		/* Update the PER. */
+		/* Make sure it doesn't index out of array's bounds. */
+		count = sizeof(nretry_to_per_lookup) /
+			sizeof(nretry_to_per_lookup[0]);
+		if (retries >= count)
+			retries = count - 1;
+		if (info_priv->n_bad_frames) {
+			/* new_PER = 7/8*old_PER + 1/8*(currentPER)  */
+			/*
+			 * Assuming that n_frames is not 0.  The current PER
+			 * from the retries is 100 * retries / (retries+1),
+			 * since the first retries attempts failed, and the
+			 * next one worked.  For the one that worked,
+			 * n_bad_frames subframes out of n_frames wored,
+			 * so the PER for that part is
+			 * 100 * n_bad_frames / n_frames, and it contributes
+			 * 100 * n_bad_frames / (n_frames * (retries+1)) to
+			 * the above PER.  The expression below is a
+			 * simplified version of the sum of these two terms.
+			 */
+			if (info_priv->n_frames > 0)
+				rate_ctrl->state[tx_rate].per
+				      = (u8)
+					(rate_ctrl->state[tx_rate].per -
+					(rate_ctrl->state[tx_rate].per >> 3) +
+					((100*(retries*info_priv->n_frames +
+					info_priv->n_bad_frames) /
+					(info_priv->n_frames *
+						(retries+1))) >> 3));
+		} else {
+			/* new_PER = 7/8*old_PER + 1/8*(currentPER) */
+
+			rate_ctrl->state[tx_rate].per = (u8)
+				(rate_ctrl->state[tx_rate].per -
+				(rate_ctrl->state[tx_rate].per >> 3) +
+				(nretry_to_per_lookup[retries] >> 3));
+		}
+
+		rate_ctrl->rssi_last_prev2 = rate_ctrl->rssi_last_prev;
+		rate_ctrl->rssi_last_prev  = rate_ctrl->rssi_last;
+		rate_ctrl->rssi_last = info_priv->tx.ts_rssi;
+		rate_ctrl->rssi_time = now_msec;
+
+		/*
+		 * If we got at most one retry then increase the max rate if
+		 * this was a probe.  Otherwise, ignore the probe.
+		 */
+
+		if (rate_ctrl->probe_rate && rate_ctrl->probe_rate == tx_rate) {
+			if (retries > 0 || 2 * info_priv->n_bad_frames >
+				info_priv->n_frames) {
+				/*
+				 * Since we probed with just a single attempt,
+				 * any retries means the probe failed.  Also,
+				 * if the attempt worked, but more than half
+				 * the subframes were bad then also consider
+				 * the probe a failure.
+				 */
+				rate_ctrl->probe_rate = 0;
+			} else {
+				u8 probe_rate = 0;
+
+				rate_ctrl->rate_max_phy = rate_ctrl->probe_rate;
+				probe_rate = rate_ctrl->probe_rate;
+
+				if (rate_ctrl->state[probe_rate].per > 30)
+					rate_ctrl->state[probe_rate].per = 20;
+
+				rate_ctrl->probe_rate = 0;
+
+				/*
+				 * Since this probe succeeded, we allow the next
+				 * probe twice as soon.  This allows the maxRate
+				 * to move up faster if the probes are
+				 * succesful.
+				 */
+				rate_ctrl->probe_time = now_msec -
+					rate_table->probe_interval / 2;
+			}
+		}
+
+		if (retries > 0) {
+			/*
+			 * Don't update anything.  We don't know if
+			 * this was because of collisions or poor signal.
+			 *
+			 * Later: if rssi_ack is close to
+			 * rate_ctrl->state[txRate].rssi_thres and we see lots
+			 * of retries, then we could increase
+			 * rate_ctrl->state[txRate].rssi_thres.
+			 */
+			rate_ctrl->hw_maxretry_pktcnt = 0;
+		} else {
+			/*
+			 * It worked with no retries. First ignore bogus (small)
+			 * rssi_ack values.
+			 */
+			if (tx_rate == rate_ctrl->rate_max_phy &&
+					rate_ctrl->hw_maxretry_pktcnt < 255) {
+				rate_ctrl->hw_maxretry_pktcnt++;
+			}
+
+			if (info_priv->tx.ts_rssi >=
+				rate_table->info[tx_rate].rssi_ack_validmin) {
+				/* Average the rssi */
+				if (tx_rate != rate_ctrl->rssi_sum_rate) {
+					rate_ctrl->rssi_sum_rate = tx_rate;
+					rate_ctrl->rssi_sum =
+						rate_ctrl->rssi_sum_cnt = 0;
+				}
+
+				rate_ctrl->rssi_sum += info_priv->tx.ts_rssi;
+				rate_ctrl->rssi_sum_cnt++;
+
+				if (rate_ctrl->rssi_sum_cnt > 4) {
+					int32_t rssi_ackAvg =
+						(rate_ctrl->rssi_sum + 2) / 4;
+					int8_t rssi_thres =
+						rate_ctrl->state[tx_rate].
+						rssi_thres;
+					int8_t rssi_ack_vmin =
+						rate_table->info[tx_rate].
+						rssi_ack_validmin;
+
+					rate_ctrl->rssi_sum =
+						rate_ctrl->rssi_sum_cnt = 0;
+
+					/* Now reduce the current
+					 * rssi threshold. */
+					if ((rssi_ackAvg < rssi_thres + 2) &&
+						(rssi_thres > rssi_ack_vmin)) {
+						rate_ctrl->state[tx_rate].
+							rssi_thres--;
+					}
+
+					state_change = TRUE;
+				}
+			}
+		}
+	}
+
+	/* For all cases */
+
+	/*
+	 * If this rate looks bad (high PER) then stop using it for
+	 * a while (except if we are probing).
+	 */
+	if (rate_ctrl->state[tx_rate].per >= 55 && tx_rate > 0 &&
+			rate_table->info[tx_rate].ratekbps <=
+			rate_table->info[rate_ctrl->rate_max_phy].ratekbps) {
+		ath_rc_get_nextlowervalid_txrate(rate_table, rate_ctrl,
+				(u8) tx_rate, &rate_ctrl->rate_max_phy);
+
+		/* Don't probe for a little while. */
+		rate_ctrl->probe_time = now_msec;
+	}
+
+	if (state_change) {
+		/*
+		 * Make sure the rates above this have higher rssi thresholds.
+		 * (Note:  Monotonicity is kept within the OFDM rates and
+		 *         within the CCK rates. However, no adjustment is
+		 *         made to keep the rssi thresholds monotonically
+		 *         increasing between the CCK and OFDM rates.)
+		 */
+		for (rate = tx_rate; rate <
+				rate_ctrl->rate_table_size - 1; rate++) {
+			if (rate_table->info[rate+1].phy !=
+				rate_table->info[tx_rate].phy)
+				break;
+
+			if (rate_ctrl->state[rate].rssi_thres +
+				rate_table->info[rate].rssi_ack_deltamin >
+					rate_ctrl->state[rate+1].rssi_thres) {
+				rate_ctrl->state[rate+1].rssi_thres =
+					rate_ctrl->state[rate].
+						rssi_thres +
+					rate_table->info[rate].
+						rssi_ack_deltamin;
+			}
+		}
+
+		/* Make sure the rates below this have lower rssi thresholds. */
+		for (rate = tx_rate - 1; rate >= 0; rate--) {
+			if (rate_table->info[rate].phy !=
+				rate_table->info[tx_rate].phy)
+				break;
+
+			if (rate_ctrl->state[rate].rssi_thres +
+				rate_table->info[rate].rssi_ack_deltamin >
+					rate_ctrl->state[rate+1].rssi_thres) {
+				if (rate_ctrl->state[rate+1].rssi_thres <
+					rate_table->info[rate].
+					rssi_ack_deltamin)
+					rate_ctrl->state[rate].rssi_thres = 0;
+				else {
+					rate_ctrl->state[rate].rssi_thres =
+						rate_ctrl->state[rate+1].
+							rssi_thres -
+							rate_table->info[rate].
+							rssi_ack_deltamin;
+				}
+
+				if (rate_ctrl->state[rate].rssi_thres <
+					rate_table->info[rate].
+						rssi_ack_validmin) {
+					rate_ctrl->state[rate].rssi_thres =
+						rate_table->info[rate].
+							rssi_ack_validmin;
+				}
+			}
+		}
+	}
+
+	/* Make sure the rates below this have lower PER */
+	/* Monotonicity is kept only for rates below the current rate. */
+	if (rate_ctrl->state[tx_rate].per < last_per) {
+		for (rate = tx_rate - 1; rate >= 0; rate--) {
+			if (rate_table->info[rate].phy !=
+				rate_table->info[tx_rate].phy)
+				break;
+
+			if (rate_ctrl->state[rate].per >
+					rate_ctrl->state[rate+1].per) {
+				rate_ctrl->state[rate].per =
+					rate_ctrl->state[rate+1].per;
+			}
+		}
+	}
+
+	/* Maintain monotonicity for rates above the current rate */
+	for (rate = tx_rate; rate < rate_ctrl->rate_table_size - 1; rate++) {
+		if (rate_ctrl->state[rate+1].per < rate_ctrl->state[rate].per)
+			rate_ctrl->state[rate+1].per =
+				rate_ctrl->state[rate].per;
+	}
+
+	/* Every so often, we reduce the thresholds and
+	 * PER (different for CCK and OFDM). */
+	if (now_msec - rate_ctrl->rssi_down_time >=
+		rate_table->rssi_reduce_interval) {
+
+		for (rate = 0; rate < rate_ctrl->rate_table_size; rate++) {
+			if (rate_ctrl->state[rate].rssi_thres >
+				rate_table->info[rate].rssi_ack_validmin)
+				rate_ctrl->state[rate].rssi_thres -= 1;
+		}
+		rate_ctrl->rssi_down_time = now_msec;
+	}
+
+	/* Every so often, we reduce the thresholds
+	 * and PER (different for CCK and OFDM). */
+	if (now_msec - rate_ctrl->per_down_time >=
+		rate_table->rssi_reduce_interval) {
+		for (rate = 0; rate < rate_ctrl->rate_table_size; rate++) {
+			rate_ctrl->state[rate].per =
+				7 * rate_ctrl->state[rate].per / 8;
+		}
+
+		rate_ctrl->per_down_time = now_msec;
+	}
+}
+
+/*
+ * This routine is called in rate control callback tx_status() to give
+ * the status of previous frames.
+ */
+static void ath_rc_update(struct ath_softc *sc,
+			  struct ath_rate_node *ath_rc_priv,
+			  struct ath_tx_info_priv *info_priv, int final_ts_idx,
+			  int xretries, int long_retry)
+{
+	struct ath_rate_softc  *asc = (struct ath_rate_softc *)sc->sc_rc;
+	struct ath_rate_table *rate_table;
+	struct ath_tx_ratectrl *rate_ctrl;
+	struct ath_rc_series rcs[4];
+	u8 flags;
+	u32 series = 0, rix;
+
+	memcpy(rcs, info_priv->rcs, 4 * sizeof(rcs[0]));
+	rate_table = (struct ath_rate_table *)
+		asc->hw_rate_table[sc->sc_curmode];
+	rate_ctrl = (struct ath_tx_ratectrl *)(ath_rc_priv);
+	ASSERT(rcs[0].tries != 0);
+
+	/*
+	 * If the first rate is not the final index, there
+	 * are intermediate rate failures to be processed.
+	 */
+	if (final_ts_idx != 0) {
+		/* Process intermediate rates that failed.*/
+		for (series = 0; series < final_ts_idx ; series++) {
+			if (rcs[series].tries != 0) {
+				flags = rcs[series].flags;
+				/* If HT40 and we have switched mode from
+				 * 40 to 20 => don't update */
+				if ((flags & ATH_RC_CW40_FLAG) &&
+					(rate_ctrl->rc_phy_mode !=
+					(flags & ATH_RC_CW40_FLAG)))
+					return;
+				if ((flags & ATH_RC_CW40_FLAG) &&
+					(flags & ATH_RC_SGI_FLAG))
+					rix = rate_table->info[
+						rcs[series].rix].ht_index;
+				else if (flags & ATH_RC_SGI_FLAG)
+					rix = rate_table->info[
+						rcs[series].rix].sgi_index;
+				else if (flags & ATH_RC_CW40_FLAG)
+					rix = rate_table->info[
+						rcs[series].rix].cw40index;
+				else
+					rix = rate_table->info[
+						rcs[series].rix].base_index;
+				ath_rc_update_ht(sc, ath_rc_priv,
+						info_priv, rix,
+						xretries ? 1 : 2,
+						rcs[series].tries);
+			}
+		}
+	} else {
+		/*
+		 * Handle the special case of MIMO PS burst, where the second
+		 * aggregate is sent out with only one rate and one try.
+		 * Treating it as an excessive retry penalizes the rate
+		 * inordinately.
+		 */
+		if (rcs[0].tries == 1 && xretries == 1)
+			xretries = 2;
+	}
+
+	flags = rcs[series].flags;
+	/* If HT40 and we have switched mode from 40 to 20 => don't update */
+	if ((flags & ATH_RC_CW40_FLAG) &&
+		(rate_ctrl->rc_phy_mode != (flags & ATH_RC_CW40_FLAG)))
+		return;
+
+	if ((flags & ATH_RC_CW40_FLAG) && (flags & ATH_RC_SGI_FLAG))
+		rix = rate_table->info[rcs[series].rix].ht_index;
+	else if (flags & ATH_RC_SGI_FLAG)
+		rix = rate_table->info[rcs[series].rix].sgi_index;
+	else if (flags & ATH_RC_CW40_FLAG)
+		rix = rate_table->info[rcs[series].rix].cw40index;
+	else
+		rix = rate_table->info[rcs[series].rix].base_index;
+
+	ath_rc_update_ht(sc, ath_rc_priv, info_priv, rix,
+		xretries, long_retry);
+}
+
+
+/*
+ * Process a tx descriptor for a completed transmit (success or failure).
+ */
+static void ath_rate_tx_complete(struct ath_softc *sc,
+				 struct ath_node *an,
+				 struct ath_rate_node *rc_priv,
+				 struct ath_tx_info_priv *info_priv)
+{
+	int final_ts_idx = info_priv->tx.ts_rateindex;
+	int tx_status = 0, is_underrun = 0;
+	struct ath_vap *avp;
+
+	avp = rc_priv->avp;
+	if ((avp->av_config.av_fixed_rateset != IEEE80211_FIXED_RATE_NONE)
+			|| info_priv->tx.ts_status & ATH9K_TXERR_FILT)
+		return;
+
+	if (info_priv->tx.ts_rssi > 0) {
+		ATH_RSSI_LPF(an->an_chainmask_sel.tx_avgrssi,
+				info_priv->tx.ts_rssi);
+	}
+
+	/*
+	 * If underrun error is seen assume it as an excessive retry only
+	 * if prefetch trigger level have reached the max (0x3f for 5416)
+	 * Adjust the long retry as if the frame was tried ATH_11N_TXMAXTRY
+	 * times. This affects how ratectrl updates PER for the failed rate.
+	 */
+	if (info_priv->tx.ts_flags &
+		(ATH9K_TX_DATA_UNDERRUN | ATH9K_TX_DELIM_UNDERRUN) &&
+		((sc->sc_ah->ah_txTrigLevel) >= tx_triglevel_max)) {
+		tx_status = 1;
+		is_underrun = 1;
+	}
+
+	if ((info_priv->tx.ts_status & ATH9K_TXERR_XRETRY) ||
+			(info_priv->tx.ts_status & ATH9K_TXERR_FIFO))
+		tx_status = 1;
+
+	ath_rc_update(sc, rc_priv, info_priv, final_ts_idx, tx_status,
+		      (is_underrun) ? ATH_11N_TXMAXTRY :
+		      info_priv->tx.ts_longretry);
+}
+
+
+/*
+ *  Update the SIB's rate control information
+ *
+ *  This should be called when the supported rates change
+ *  (e.g. SME operation, wireless mode change)
+ *
+ *  It will determine which rates are valid for use.
+ */
+static void ath_rc_sib_update(struct ath_softc *sc,
+			      struct ath_rate_node *ath_rc_priv,
+			      u32 capflag, int keep_state,
+			      struct ath_rateset *negotiated_rates,
+			      struct ath_rateset *negotiated_htrates)
+{
+	struct ath_rate_table *rate_table = NULL;
+	struct ath_rate_softc *asc = (struct ath_rate_softc *)sc->sc_rc;
+	struct ath_rateset *rateset = negotiated_rates;
+	u8 *ht_mcs = (u8 *)negotiated_htrates;
+	struct ath_tx_ratectrl *rate_ctrl  = (struct ath_tx_ratectrl *)
+		(ath_rc_priv);
+	u8 i, j, k, hi = 0, hthi = 0;
+
+	rate_table = (struct ath_rate_table *)
+		asc->hw_rate_table[sc->sc_curmode];
+
+	/* Initial rate table size. Will change depending
+	 * on the working rate set */
+	rate_ctrl->rate_table_size = MAX_TX_RATE_TBL;
+
+	/* Initialize thresholds according to the global rate table */
+	for (i = 0 ; (i < rate_ctrl->rate_table_size) && (!keep_state); i++) {
+		rate_ctrl->state[i].rssi_thres =
+			rate_table->info[i].rssi_ack_validmin;
+		rate_ctrl->state[i].per = 0;
+	}
+
+	/* Determine the valid rates */
+	ath_rc_init_valid_txmask(rate_ctrl);
+
+	for (i = 0; i < WLAN_RC_PHY_MAX; i++) {
+		for (j = 0; j < MAX_TX_RATE_PHY; j++)
+			rate_ctrl->valid_phy_rateidx[i][j] = 0;
+		rate_ctrl->valid_phy_ratecnt[i] = 0;
+	}
+	rate_ctrl->rc_phy_mode = (capflag & WLAN_RC_40_FLAG);
+
+	/* Set stream capability */
+	ath_rc_priv->single_stream = (capflag & WLAN_RC_DS_FLAG) ? 0 : 1;
+
+	if (!rateset->rs_nrates) {
+		/* No working rate, just initialize valid rates */
+		hi = ath_rc_sib_init_validrates(ath_rc_priv, rate_table,
+						capflag);
+	} else {
+		/* Use intersection of working rates and valid rates */
+		hi = ath_rc_sib_setvalid_rates(ath_rc_priv, rate_table,
+					       rateset, capflag);
+		if (capflag & WLAN_RC_HT_FLAG) {
+			hthi = ath_rc_sib_setvalid_htrates(ath_rc_priv,
+							   rate_table,
+							   ht_mcs,
+							   capflag);
+		}
+		hi = A_MAX(hi, hthi);
+	}
+
+	rate_ctrl->rate_table_size = hi + 1;
+	rate_ctrl->rate_max_phy = 0;
+	ASSERT(rate_ctrl->rate_table_size <= MAX_TX_RATE_TBL);
+
+	for (i = 0, k = 0; i < WLAN_RC_PHY_MAX; i++) {
+		for (j = 0; j < rate_ctrl->valid_phy_ratecnt[i]; j++) {
+			rate_ctrl->valid_rate_index[k++] =
+				rate_ctrl->valid_phy_rateidx[i][j];
+		}
+
+		if (!ath_rc_valid_phyrate(i, rate_table->initial_ratemax, TRUE)
+		    || !rate_ctrl->valid_phy_ratecnt[i])
+			continue;
+
+		rate_ctrl->rate_max_phy = rate_ctrl->valid_phy_rateidx[i][j-1];
+	}
+	ASSERT(rate_ctrl->rate_table_size <= MAX_TX_RATE_TBL);
+	ASSERT(k <= MAX_TX_RATE_TBL);
+
+	rate_ctrl->max_valid_rate = k;
+	/*
+	 * Some third party vendors don't send the supported rate series in
+	 * order. So sorting to make sure its in order, otherwise our RateFind
+	 * Algo will select wrong rates
+	 */
+	ath_rc_sort_validrates(rate_table, rate_ctrl);
+	rate_ctrl->rate_max_phy = rate_ctrl->valid_rate_index[k-4];
+}
+
+/*
+ * Update rate-control state on station associate/reassociate.
+ */
+static int ath_rate_newassoc(struct ath_softc *sc,
+			     struct ath_rate_node *ath_rc_priv,
+			     unsigned int capflag,
+			     struct ath_rateset *negotiated_rates,
+			     struct ath_rateset *negotiated_htrates)
+{
+
+
+	ath_rc_priv->ht_cap =
+		((capflag & ATH_RC_DS_FLAG) ? WLAN_RC_DS_FLAG : 0) |
+		((capflag & ATH_RC_SGI_FLAG) ? WLAN_RC_SGI_FLAG : 0) |
+		((capflag & ATH_RC_HT_FLAG)  ? WLAN_RC_HT_FLAG : 0) |
+		((capflag & ATH_RC_CW40_FLAG) ? WLAN_RC_40_FLAG : 0);
+
+	ath_rc_sib_update(sc, ath_rc_priv, ath_rc_priv->ht_cap, 0,
+			  negotiated_rates, negotiated_htrates);
+
+	return 0;
+}
+
+/*
+ *  This routine is called to initialize the rate control parameters
+ *  in the SIB. It is called initially during system initialization
+ *  or when a station is associated with the AP.
+ */
+static void ath_rc_sib_init(struct ath_rate_node *ath_rc_priv)
+{
+	struct ath_tx_ratectrl *rate_ctrl;
+
+	rate_ctrl = (struct ath_tx_ratectrl *)(ath_rc_priv);
+	rate_ctrl->rssi_down_time = jiffies_to_msecs(jiffies);
+}
+
+
+static void ath_setup_rates(struct ieee80211_local *local, struct sta_info *sta)
+
+{
+	struct ieee80211_supported_band *sband;
+	struct ieee80211_hw *hw = local_to_hw(local);
+	struct ath_softc *sc = hw->priv;
+	struct ath_rate_node *rc_priv = sta->rate_ctrl_priv;
+	int i, j = 0;
+
+	DPRINTF(sc, ATH_DBG_RATE, "%s", __func__);
+	sband =  local->hw.wiphy->bands[local->hw.conf.channel->band];
+	for (i = 0; i < sband->n_bitrates; i++) {
+		if (sta->supp_rates[local->hw.conf.channel->band] & BIT(i)) {
+			rc_priv->neg_rates.rs_rates[j]
+				= (sband->bitrates[i].bitrate * 2) / 10;
+			j++;
+		}
+	}
+	rc_priv->neg_rates.rs_nrates = j;
+}
+
+void ath_rc_node_update(struct ieee80211_hw *hw, struct ath_rate_node *rc_priv)
+{
+	struct ath_softc *sc = hw->priv;
+	u32 capflag = 0;
+
+	if (hw->conf.ht_conf.ht_supported) {
+		capflag |= ATH_RC_HT_FLAG | ATH_RC_DS_FLAG;
+		if (sc->sc_ht_info.tx_chan_width == ATH9K_HT_MACMODE_2040)
+			capflag |= ATH_RC_CW40_FLAG;
+	}
+
+	ath_rate_newassoc(sc, rc_priv, capflag,
+			  &rc_priv->neg_rates,
+			  &rc_priv->neg_ht_rates);
+
+}
+
+/* Rate Control callbacks */
+static void ath_tx_status(void *priv, struct net_device *dev,
+			  struct sk_buff *skb)
+{
+	struct ath_softc *sc = priv;
+	struct ath_tx_info_priv *tx_info_priv;
+	struct ath_node *an;
+	struct sta_info *sta;
+	struct ieee80211_local *local;
+	struct ieee80211_tx_info *tx_info = IEEE80211_SKB_CB(skb);
+	struct ieee80211_hdr *hdr;
+	__le16 fc;
+
+	local = hw_to_local(sc->hw);
+	hdr = (struct ieee80211_hdr *)skb->data;
+	fc = hdr->frame_control;
+	tx_info_priv = (struct ath_tx_info_priv *)tx_info->driver_data[0];
+
+	spin_lock_bh(&sc->node_lock);
+	an = ath_node_find(sc, hdr->addr1);
+	spin_unlock_bh(&sc->node_lock);
+
+	sta = sta_info_get(local, hdr->addr1);
+	if (!an || !sta || !ieee80211_is_data(fc)) {
+		if (tx_info->driver_data[0] != NULL) {
+			kfree(tx_info->driver_data[0]);
+			tx_info->driver_data[0] = NULL;
+		}
+		return;
+	}
+	if (tx_info->driver_data[0] != NULL) {
+		ath_rate_tx_complete(sc, an, sta->rate_ctrl_priv, tx_info_priv);
+		kfree(tx_info->driver_data[0]);
+		tx_info->driver_data[0] = NULL;
+	}
+}
+
+static void ath_tx_aggr_resp(struct ath_softc *sc,
+			     struct sta_info *sta,
+			     struct ath_node *an,
+			     u8 tidno)
+{
+	struct ieee80211_hw *hw = sc->hw;
+	struct ieee80211_local *local;
+	struct ath_atx_tid *txtid;
+	struct ieee80211_supported_band *sband;
+	u16 buffersize = 0;
+	int state;
+	DECLARE_MAC_BUF(mac);
+
+	if (!sc->sc_txaggr)
+		return;
+
+	txtid = ATH_AN_2_TID(an, tidno);
+	if (!txtid->paused)
+		return;
+
+	local = hw_to_local(sc->hw);
+	sband = hw->wiphy->bands[hw->conf.channel->band];
+	buffersize = IEEE80211_MIN_AMPDU_BUF <<
+		sband->ht_info.ampdu_factor; /* FIXME */
+	state = sta->ampdu_mlme.tid_state_tx[tidno];
+
+	if (state & HT_ADDBA_RECEIVED_MSK) {
+		txtid->addba_exchangecomplete = 1;
+		txtid->addba_exchangeinprogress = 0;
+		txtid->baw_size = buffersize;
+
+		DPRINTF(sc, ATH_DBG_AGGR,
+			"%s: Resuming tid, buffersize: %d\n",
+			__func__,
+			buffersize);
+
+		ath_tx_resume_tid(sc, txtid);
+	}
+}
+
+static void ath_get_rate(void *priv, struct net_device *dev,
+			 struct ieee80211_supported_band *sband,
+			 struct sk_buff *skb,
+			 struct rate_selection *sel)
+{
+	struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data;
+	struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr);
+	struct sta_info *sta;
+	struct ath_softc *sc = (struct ath_softc *)priv;
+	struct ieee80211_hw *hw = sc->hw;
+	struct ath_tx_info_priv *tx_info_priv;
+	struct ath_rate_node *ath_rc_priv;
+	struct ath_node *an;
+	struct ieee80211_tx_info *tx_info = IEEE80211_SKB_CB(skb);
+	int is_probe, chk, ret;
+	s8 lowest_idx;
+	__le16 fc = hdr->frame_control;
+	u8 *qc, tid;
+	DECLARE_MAC_BUF(mac);
+
+	DPRINTF(sc, ATH_DBG_RATE, "%s\n", __func__);
+
+	/* allocate driver private area of tx_info */
+	tx_info->driver_data[0] = kzalloc(sizeof(*tx_info_priv), GFP_ATOMIC);
+	ASSERT(tx_info->driver_data[0] != NULL);
+	tx_info_priv = (struct ath_tx_info_priv *)tx_info->driver_data[0];
+
+	sta = sta_info_get(local, hdr->addr1);
+	lowest_idx = rate_lowest_index(local, sband, sta);
+	tx_info_priv->min_rate = (sband->bitrates[lowest_idx].bitrate * 2) / 10;
+	/* lowest rate for management and multicast/broadcast frames */
+	if (!ieee80211_is_data(fc) ||
+			is_multicast_ether_addr(hdr->addr1) || !sta) {
+		sel->rate_idx = lowest_idx;
+		return;
+	}
+
+	ath_rc_priv = sta->rate_ctrl_priv;
+
+	/* Find tx rate for unicast frames */
+	ath_rate_findrate(sc, ath_rc_priv,
+			  ATH_11N_TXMAXTRY, 4,
+			  ATH_RC_PROBE_ALLOWED,
+			  tx_info_priv->rcs,
+			  &is_probe,
+			  false);
+	if (is_probe)
+		sel->probe_idx = ((struct ath_tx_ratectrl *)
+			sta->rate_ctrl_priv)->probe_rate;
+
+	/* Ratecontrol sometimes returns invalid rate index */
+	if (tx_info_priv->rcs[0].rix != 0xff)
+		ath_rc_priv->prev_data_rix = tx_info_priv->rcs[0].rix;
+	else
+		tx_info_priv->rcs[0].rix = ath_rc_priv->prev_data_rix;
+
+	sel->rate_idx = tx_info_priv->rcs[0].rix;
+
+	/* Check if aggregation has to be enabled for this tid */
+
+	if (hw->conf.ht_conf.ht_supported) {
+		if (ieee80211_is_data_qos(fc)) {
+			qc = ieee80211_get_qos_ctl(hdr);
+			tid = qc[0] & 0xf;
+
+			spin_lock_bh(&sc->node_lock);
+			an = ath_node_find(sc, hdr->addr1);
+			spin_unlock_bh(&sc->node_lock);
+
+			if (!an) {
+				DPRINTF(sc, ATH_DBG_AGGR,
+					"%s: Node not found to "
+					"init/chk TX aggr\n", __func__);
+				return;
+			}
+
+			chk = ath_tx_aggr_check(sc, an, tid);
+			if (chk == AGGR_REQUIRED) {
+				ret = ieee80211_start_tx_ba_session(hw,
+					hdr->addr1, tid);
+				if (ret)
+					DPRINTF(sc, ATH_DBG_AGGR,
+						"%s: Unable to start tx "
+						"aggr for: %s\n",
+						__func__,
+						print_mac(mac, hdr->addr1));
+				else
+					DPRINTF(sc, ATH_DBG_AGGR,
+						"%s: Started tx aggr for: %s\n",
+						__func__,
+						print_mac(mac, hdr->addr1));
+			} else if (chk == AGGR_EXCHANGE_PROGRESS)
+				ath_tx_aggr_resp(sc, sta, an, tid);
+		}
+	}
+}
+
+static void ath_rate_init(void *priv, void *priv_sta,
+			  struct ieee80211_local *local,
+			  struct sta_info *sta)
+{
+	struct ieee80211_supported_band *sband;
+	struct ieee80211_hw *hw = local_to_hw(local);
+	struct ieee80211_conf *conf = &local->hw.conf;
+	struct ath_softc *sc = hw->priv;
+	int i, j = 0;
+
+	DPRINTF(sc, ATH_DBG_RATE, "%s\n", __func__);
+
+	sband = local->hw.wiphy->bands[local->hw.conf.channel->band];
+	sta->txrate_idx = rate_lowest_index(local, sband, sta);
+
+	ath_setup_rates(local, sta);
+	if (conf->flags & IEEE80211_CONF_SUPPORT_HT_MODE) {
+		for (i = 0; i < MCS_SET_SIZE; i++) {
+			if (conf->ht_conf.supp_mcs_set[i/8] & (1<<(i%8)))
+				((struct ath_rate_node *)
+				priv_sta)->neg_ht_rates.rs_rates[j++] = i;
+			if (j == ATH_RATE_MAX)
+				break;
+		}
+		((struct ath_rate_node *)priv_sta)->neg_ht_rates.rs_nrates = j;
+	}
+	ath_rc_node_update(hw, priv_sta);
+}
+
+static void ath_rate_clear(void *priv)
+{
+	return;
+}
+
+static void *ath_rate_alloc(struct ieee80211_local *local)
+{
+	struct ieee80211_hw *hw = local_to_hw(local);
+	struct ath_softc *sc = hw->priv;
+
+	DPRINTF(sc, ATH_DBG_RATE, "%s", __func__);
+	return local->hw.priv;
+}
+
+static void ath_rate_free(void *priv)
+{
+	return;
+}
+
+static void *ath_rate_alloc_sta(void *priv, gfp_t gfp)
+{
+	struct ath_softc *sc = priv;
+	struct ath_vap *avp = sc->sc_vaps[0];
+	struct ath_rate_node *rate_priv;
+
+	DPRINTF(sc, ATH_DBG_RATE, "%s", __func__);
+	rate_priv = ath_rate_node_alloc(avp, sc->sc_rc, gfp);
+	if (!rate_priv) {
+		DPRINTF(sc, ATH_DBG_FATAL, "%s:Unable to allocate"
+				"private rate control structure", __func__);
+		return NULL;
+	}
+	ath_rc_sib_init(rate_priv);
+	return rate_priv;
+}
+
+static void ath_rate_free_sta(void *priv, void *priv_sta)
+{
+	struct ath_rate_node *rate_priv = priv_sta;
+	struct ath_softc *sc = priv;
+
+	DPRINTF(sc, ATH_DBG_RATE, "%s", __func__);
+	ath_rate_node_free(rate_priv);
+}
+
+static struct rate_control_ops ath_rate_ops = {
+	.module = NULL,
+	.name = "ath9k_rate_control",
+	.tx_status = ath_tx_status,
+	.get_rate = ath_get_rate,
+	.rate_init = ath_rate_init,
+	.clear = ath_rate_clear,
+	.alloc = ath_rate_alloc,
+	.free = ath_rate_free,
+	.alloc_sta = ath_rate_alloc_sta,
+	.free_sta = ath_rate_free_sta
+};
+
+int ath_rate_control_register(void)
+{
+	return ieee80211_rate_control_register(&ath_rate_ops);
+}
+
+void ath_rate_control_unregister(void)
+{
+	ieee80211_rate_control_unregister(&ath_rate_ops);
+}
+
diff --git a/drivers/net/wireless/ath9k/rc.h b/drivers/net/wireless/ath9k/rc.h
new file mode 100644
index 000000000000..71aef9c75232
--- /dev/null
+++ b/drivers/net/wireless/ath9k/rc.h
@@ -0,0 +1,316 @@
+/*
+ * Copyright (c) 2004 Sam Leffler, Errno Consulting
+ * Copyright (c) 2004 Video54 Technologies, Inc.
+ * Copyright (c) 2008 Atheros Communications Inc.
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#ifndef RC_H
+#define RC_H
+
+#include "ath9k.h"
+/*
+ * Interface definitions for transmit rate control modules for the
+ * Atheros driver.
+ *
+ * A rate control module is responsible for choosing the transmit rate
+ * for each data frame.  Management+control frames are always sent at
+ * a fixed rate.
+ *
+ * Only one module may be present at a time; the driver references
+ * rate control interfaces by symbol name.  If multiple modules are
+ * to be supported we'll need to switch to a registration-based scheme
+ * as is currently done, for example, for authentication modules.
+ *
+ * An instance of the rate control module is attached to each device
+ * at attach time and detached when the device is destroyed.  The module
+ * may associate data with each device and each node (station).  Both
+ * sets of storage are opaque except for the size of the per-node storage
+ * which must be provided when the module is attached.
+ *
+ * The rate control module is notified for each state transition and
+ * station association/reassociation.  Otherwise it is queried for a
+ * rate for each outgoing frame and provided status from each transmitted
+ * frame.  Any ancillary processing is the responsibility of the module
+ * (e.g. if periodic processing is required then the module should setup
+ * it's own timer).
+ *
+ * In addition to the transmit rate for each frame the module must also
+ * indicate the number of attempts to make at the specified rate.  If this
+ * number is != ATH_TXMAXTRY then an additional callback is made to setup
+ * additional transmit state.  The rate control code is assumed to write
+ * this additional data directly to the transmit descriptor.
+ */
+
+struct ath_softc;
+
+#define TRUE 1
+#define FALSE 0
+
+#define ATH_RATE_MAX	30
+#define MCS_SET_SIZE	128
+
+enum ieee80211_fixed_rate_mode {
+	IEEE80211_FIXED_RATE_NONE  = 0,
+	IEEE80211_FIXED_RATE_MCS   = 1  /* HT rates */
+};
+
+/*
+ * Use the hal os glue code to get ms time
+ */
+#define IEEE80211_RATE_IDX_ENTRY(val, idx) (((val&(0xff<<(idx*8)))>>(idx*8)))
+
+#define SHORT_PRE 1
+#define LONG_PRE 0
+
+#define WLAN_PHY_HT_20_SS       WLAN_RC_PHY_HT_20_SS
+#define WLAN_PHY_HT_20_DS       WLAN_RC_PHY_HT_20_DS
+#define WLAN_PHY_HT_20_DS_HGI   WLAN_RC_PHY_HT_20_DS_HGI
+#define WLAN_PHY_HT_40_SS       WLAN_RC_PHY_HT_40_SS
+#define WLAN_PHY_HT_40_SS_HGI   WLAN_RC_PHY_HT_40_SS_HGI
+#define WLAN_PHY_HT_40_DS       WLAN_RC_PHY_HT_40_DS
+#define WLAN_PHY_HT_40_DS_HGI   WLAN_RC_PHY_HT_40_DS_HGI
+
+#define WLAN_PHY_OFDM	PHY_OFDM
+#define WLAN_PHY_CCK	PHY_CCK
+
+#define TRUE_20		0x2
+#define TRUE_40		0x4
+#define TRUE_2040	(TRUE_20|TRUE_40)
+#define TRUE_ALL	(TRUE_2040|TRUE)
+
+enum {
+	WLAN_RC_PHY_HT_20_SS = 4,
+	WLAN_RC_PHY_HT_20_DS,
+	WLAN_RC_PHY_HT_40_SS,
+	WLAN_RC_PHY_HT_40_DS,
+	WLAN_RC_PHY_HT_20_SS_HGI,
+	WLAN_RC_PHY_HT_20_DS_HGI,
+	WLAN_RC_PHY_HT_40_SS_HGI,
+	WLAN_RC_PHY_HT_40_DS_HGI,
+	WLAN_RC_PHY_MAX
+};
+
+#define WLAN_RC_PHY_DS(_phy)   ((_phy == WLAN_RC_PHY_HT_20_DS)           \
+	|| (_phy == WLAN_RC_PHY_HT_40_DS)        \
+	|| (_phy == WLAN_RC_PHY_HT_20_DS_HGI)    \
+	|| (_phy == WLAN_RC_PHY_HT_40_DS_HGI))
+#define WLAN_RC_PHY_40(_phy)   ((_phy == WLAN_RC_PHY_HT_40_SS)           \
+	|| (_phy == WLAN_RC_PHY_HT_40_DS)        \
+	|| (_phy == WLAN_RC_PHY_HT_40_SS_HGI)    \
+	|| (_phy == WLAN_RC_PHY_HT_40_DS_HGI))
+#define WLAN_RC_PHY_SGI(_phy)  ((_phy == WLAN_RC_PHY_HT_20_SS_HGI)      \
+	|| (_phy == WLAN_RC_PHY_HT_20_DS_HGI)   \
+	|| (_phy == WLAN_RC_PHY_HT_40_SS_HGI)   \
+	|| (_phy == WLAN_RC_PHY_HT_40_DS_HGI))
+
+#define WLAN_RC_PHY_HT(_phy)    (_phy >= WLAN_RC_PHY_HT_20_SS)
+
+/* Returns the capflag mode */
+#define WLAN_RC_CAP_MODE(capflag) (((capflag & WLAN_RC_HT_FLAG) ?	\
+		(capflag & WLAN_RC_40_FLAG) ? TRUE_40 : TRUE_20 : TRUE))
+
+/* Return TRUE if flag supports HT20 && client supports HT20 or
+ * return TRUE if flag supports HT40 && client supports HT40.
+ * This is used becos some rates overlap between HT20/HT40.
+ */
+
+#define WLAN_RC_PHY_HT_VALID(flag, capflag) (((flag & TRUE_20) && !(capflag \
+				& WLAN_RC_40_FLAG)) || ((flag & TRUE_40) && \
+				  (capflag & WLAN_RC_40_FLAG)))
+
+#define WLAN_RC_DS_FLAG         (0x01)
+#define WLAN_RC_40_FLAG         (0x02)
+#define WLAN_RC_SGI_FLAG        (0x04)
+#define WLAN_RC_HT_FLAG         (0x08)
+
+/* Index into the rate table */
+#define INIT_RATE_MAX_20	23
+#define INIT_RATE_MAX_40	40
+
+#define RATE_TABLE_SIZE		64
+
+/* XXX: Convert to kdoc */
+struct ath_rate_table {
+	int rate_cnt;
+	struct {
+		int valid;            /* Valid for use in rate control */
+		int valid_single_stream;/* Valid for use in rate control
+					for single stream operation */
+		u8 phy;              /* CCK/OFDM/TURBO/XR */
+		u32 ratekbps;         /* Rate in Kbits per second */
+		u32 user_ratekbps;     /* User rate in KBits per second */
+		u8 ratecode;         /* rate that goes into
+					hw descriptors */
+		u8 short_preamble;    /* Mask for enabling short preamble
+						in rate code for CCK */
+		u8 dot11rate;        /* Value that goes into supported
+					rates info element of MLME */
+		u8 ctrl_rate;      /* Index of next lower basic rate,
+					used for duration computation */
+		int8_t rssi_ack_validmin;  /* Rate control related */
+		int8_t rssi_ack_deltamin;  /* Rate control related */
+		u8 base_index;        /* base rate index */
+		u8 cw40index;        /* 40cap rate index */
+		u8 sgi_index;         /* shortgi rate index */
+		u8 ht_index;          /* shortgi rate index */
+		u32 max_4ms_framelen;   /* Maximum frame length(bytes)
+						for 4ms tx duration */
+	} info[RATE_TABLE_SIZE];
+	u32 probe_interval;        /* interval for ratectrl to
+					probe for other rates */
+	u32 rssi_reduce_interval;   /* interval for ratectrl
+						to reduce RSSI */
+	u8 initial_ratemax;   /* the initial ratemax value used
+					in ath_rc_sib_update() */
+};
+
+#define ATH_RC_PROBE_ALLOWED            0x00000001
+#define ATH_RC_MINRATE_LASTRATE         0x00000002
+#define ATH_RC_SHORT_PREAMBLE           0x00000004
+
+struct ath_rc_series {
+	u8    rix;
+	u8    tries;
+	u8    flags;
+	u32   max_4ms_framelen;
+};
+
+/* rcs_flags definition */
+#define ATH_RC_DS_FLAG               0x01
+#define ATH_RC_CW40_FLAG             0x02    /* CW 40 */
+#define ATH_RC_SGI_FLAG              0x04    /* Short Guard Interval */
+#define ATH_RC_HT_FLAG               0x08    /* HT */
+#define ATH_RC_RTSCTS_FLAG           0x10    /* RTS-CTS */
+
+/*
+ * State structures for new rate adaptation code
+ */
+#define	MAX_TX_RATE_TBL	        64
+#define MAX_TX_RATE_PHY         48
+
+struct ath_tx_ratectrl_state {
+	int8_t rssi_thres; /* required rssi for this rate (dB) */
+	u8 per; /* recent estimate of packet error rate (%) */
+};
+
+struct ath_tx_ratectrl {
+	struct ath_tx_ratectrl_state state[MAX_TX_RATE_TBL]; /* state */
+	int8_t rssi_last;            /* last ack rssi */
+	int8_t rssi_last_lookup;	/* last ack rssi used for lookup */
+	int8_t rssi_last_prev;	/* previous last ack rssi */
+	int8_t rssi_last_prev2;	/* 2nd previous last ack rssi */
+	int32_t rssi_sum_cnt;        /* count of rssi_sum for averaging */
+	int32_t rssi_sum_rate;       /* rate that we are averaging */
+	int32_t rssi_sum;           /* running sum of rssi for averaging */
+	u32 valid_txrate_mask;   /* mask of valid rates */
+	u8 rate_table_size;      /* rate table size */
+	u8 rate_max;            /* max rate that has recently worked */
+	u8 probe_rate;          /* rate we are probing at */
+	u32 rssi_time;          /* msec timestamp for last ack rssi */
+	u32 rssi_down_time;      /* msec timestamp for last down step */
+	u32 probe_time;         /* msec timestamp for last probe */
+	u8 hw_maxretry_pktcnt;   /* num packets since we got
+					HW max retry error */
+	u8 max_valid_rate;       /* maximum number of valid rate */
+	u8 valid_rate_index[MAX_TX_RATE_TBL]; /* valid rate index */
+	u32 per_down_time;       /* msec timstamp for last
+					PER down step */
+
+	/* 11n state */
+	u8  valid_phy_ratecnt[WLAN_RC_PHY_MAX]; /* valid rate count */
+	u8  valid_phy_rateidx[WLAN_RC_PHY_MAX][MAX_TX_RATE_TBL];
+	u8  rc_phy_mode;
+	u8  rate_max_phy;        /* Phy index for the max rate */
+	u32 rate_max_lastused;   /* msec timstamp of when we
+					last used rateMaxPhy */
+	u32 probe_interval;     /* interval for ratectrl to probe
+					for other rates */
+};
+
+struct ath_rateset {
+	u8 rs_nrates;
+	u8 rs_rates[ATH_RATE_MAX];
+};
+
+/* per-device state */
+struct ath_rate_softc {
+	/* phy tables that contain rate control data */
+	const void *hw_rate_table[ATH9K_MODE_MAX];
+	int fixedrix;	/* -1 or index of fixed rate */
+};
+
+/* per-node state */
+struct ath_rate_node {
+	struct ath_tx_ratectrl tx_ratectrl;	/* rate control state proper */
+	u32 prev_data_rix;	/* rate idx of last data frame */
+
+	/* map of rate ix -> negotiated rate set ix */
+	u8 rixmap[MAX_TX_RATE_TBL];
+
+	/* map of ht rate ix -> negotiated rate set ix */
+	u8 ht_rixmap[MAX_TX_RATE_TBL];
+
+	u8 ht_cap;		/* ht capabilities */
+	u8 ant_tx;		/* current transmit antenna */
+
+	u8 single_stream;   /* When TRUE, only single
+				stream Tx possible */
+	struct ath_rateset neg_rates;	/* Negotiated rates */
+	struct ath_rateset neg_ht_rates;	/* Negotiated HT rates */
+	struct ath_rate_softc *asc; /* back pointer to atheros softc */
+	struct ath_vap *avp;	/* back pointer to vap */
+};
+
+/* Driver data of ieee80211_tx_info */
+struct ath_tx_info_priv {
+	struct ath_rc_series rcs[4];
+	struct ath_tx_status tx;
+	int n_frames;
+	int n_bad_frames;
+	u8 min_rate;
+};
+
+/*
+ * Attach/detach a rate control module.
+ */
+struct ath_rate_softc *ath_rate_attach(struct ath_hal *ah);
+void ath_rate_detach(struct ath_rate_softc *asc);
+
+/*
+ * Update/reset rate control state for 802.11 state transitions.
+ * Important mostly as the analog to ath_rate_newassoc when operating
+ * in station mode.
+ */
+void ath_rc_node_update(struct ieee80211_hw *hw, struct ath_rate_node *rc_priv);
+void ath_rate_newstate(struct ath_softc *sc, struct ath_vap *avp);
+
+/*
+ * Return the tx rate series.
+ */
+void ath_rate_findrate(struct ath_softc *sc, struct ath_rate_node *ath_rc_priv,
+		       int num_tries, int num_rates,
+		       unsigned int rcflag, struct ath_rc_series[],
+		       int *is_probe, int isretry);
+/*
+ * Return rate index for given Dot11 Rate.
+ */
+u8 ath_rate_findrateix(struct ath_softc *sc,
+			     u8 dot11_rate);
+
+/* Routines to register/unregister rate control algorithm */
+int ath_rate_control_register(void);
+void ath_rate_control_unregister(void);
+
+#endif /* RC_H */
diff --git a/drivers/net/wireless/ath9k/recv.c b/drivers/net/wireless/ath9k/recv.c
new file mode 100644
index 000000000000..20ddb7acdb94
--- /dev/null
+++ b/drivers/net/wireless/ath9k/recv.c
@@ -0,0 +1,1319 @@
+/*
+ * Copyright (c) 2008 Atheros Communications Inc.
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+/*
+ * Implementation of receive path.
+ */
+
+#include "core.h"
+
+/*
+ * Setup and link descriptors.
+ *
+ * 11N: we can no longer afford to self link the last descriptor.
+ * MAC acknowledges BA status as long as it copies frames to host
+ * buffer (or rx fifo). This can incorrectly acknowledge packets
+ * to a sender if last desc is self-linked.
+ *
+ * NOTE: Caller should hold the rxbuf lock.
+ */
+
+static void ath_rx_buf_link(struct ath_softc *sc, struct ath_buf *bf)
+{
+	struct ath_hal *ah = sc->sc_ah;
+	struct ath_desc *ds;
+	struct sk_buff *skb;
+
+	ATH_RXBUF_RESET(bf);
+
+	ds = bf->bf_desc;
+	ds->ds_link = 0;    /* link to null */
+	ds->ds_data = bf->bf_buf_addr;
+
+	/* XXX For RADAR?
+	 * virtual addr of the beginning of the buffer. */
+	skb = bf->bf_mpdu;
+	ASSERT(skb != NULL);
+	ds->ds_vdata = skb->data;
+
+	/* setup rx descriptors */
+	ath9k_hw_setuprxdesc(ah,
+			     ds,
+			     skb_tailroom(skb),   /* buffer size */
+			     0);
+
+	if (sc->sc_rxlink == NULL)
+		ath9k_hw_putrxbuf(ah, bf->bf_daddr);
+	else
+		*sc->sc_rxlink = bf->bf_daddr;
+
+	sc->sc_rxlink = &ds->ds_link;
+	ath9k_hw_rxena(ah);
+}
+
+/* Process received BAR frame */
+
+static int ath_bar_rx(struct ath_softc *sc,
+		      struct ath_node *an,
+		      struct sk_buff *skb)
+{
+	struct ieee80211_bar *bar;
+	struct ath_arx_tid *rxtid;
+	struct sk_buff *tskb;
+	struct ath_recv_status *rx_status;
+	int tidno, index, cindex;
+	u16 seqno;
+
+	/* look at BAR contents	 */
+
+	bar = (struct ieee80211_bar *)skb->data;
+	tidno = (le16_to_cpu(bar->control) & IEEE80211_BAR_CTL_TID_M)
+		>> IEEE80211_BAR_CTL_TID_S;
+	seqno = le16_to_cpu(bar->start_seq_num) >> IEEE80211_SEQ_SEQ_SHIFT;
+
+	/* process BAR - indicate all pending RX frames till the BAR seqno */
+
+	rxtid = &an->an_aggr.rx.tid[tidno];
+
+	spin_lock_bh(&rxtid->tidlock);
+
+	/* get relative index */
+
+	index = ATH_BA_INDEX(rxtid->seq_next, seqno);
+
+	/* drop BAR if old sequence (index is too large) */
+
+	if ((index > rxtid->baw_size) &&
+	    (index > (IEEE80211_SEQ_MAX - (rxtid->baw_size << 2))))
+		/* discard frame, ieee layer may not treat frame as a dup */
+		goto unlock_and_free;
+
+	/* complete receive processing for all pending frames upto BAR seqno */
+
+	cindex = (rxtid->baw_head + index) & (ATH_TID_MAX_BUFS - 1);
+	while ((rxtid->baw_head != rxtid->baw_tail) &&
+	       (rxtid->baw_head != cindex)) {
+		tskb = rxtid->rxbuf[rxtid->baw_head].rx_wbuf;
+		rx_status = &rxtid->rxbuf[rxtid->baw_head].rx_status;
+		rxtid->rxbuf[rxtid->baw_head].rx_wbuf = NULL;
+
+		if (tskb != NULL)
+			ath_rx_subframe(an, tskb, rx_status);
+
+		INCR(rxtid->baw_head, ATH_TID_MAX_BUFS);
+		INCR(rxtid->seq_next, IEEE80211_SEQ_MAX);
+	}
+
+	/* ... and indicate rest of the frames in-order */
+
+	while (rxtid->baw_head != rxtid->baw_tail &&
+	       rxtid->rxbuf[rxtid->baw_head].rx_wbuf != NULL) {
+		tskb = rxtid->rxbuf[rxtid->baw_head].rx_wbuf;
+		rx_status = &rxtid->rxbuf[rxtid->baw_head].rx_status;
+		rxtid->rxbuf[rxtid->baw_head].rx_wbuf = NULL;
+
+		ath_rx_subframe(an, tskb, rx_status);
+
+		INCR(rxtid->baw_head, ATH_TID_MAX_BUFS);
+		INCR(rxtid->seq_next, IEEE80211_SEQ_MAX);
+	}
+
+unlock_and_free:
+	spin_unlock_bh(&rxtid->tidlock);
+	/* free bar itself */
+	dev_kfree_skb(skb);
+	return IEEE80211_FTYPE_CTL;
+}
+
+/* Function to handle a subframe of aggregation when HT is enabled */
+
+static int ath_ampdu_input(struct ath_softc *sc,
+			   struct ath_node *an,
+			   struct sk_buff *skb,
+			   struct ath_recv_status *rx_status)
+{
+	struct ieee80211_hdr *hdr;
+	struct ath_arx_tid *rxtid;
+	struct ath_rxbuf *rxbuf;
+	u8 type, subtype;
+	u16 rxseq;
+	int tid = 0, index, cindex, rxdiff;
+	__le16 fc;
+	u8 *qc;
+
+	hdr = (struct ieee80211_hdr *)skb->data;
+	fc = hdr->frame_control;
+
+	/* collect stats of frames with non-zero version */
+
+	if ((le16_to_cpu(hdr->frame_control) & IEEE80211_FCTL_VERS) != 0) {
+		dev_kfree_skb(skb);
+		return -1;
+	}
+
+	type = le16_to_cpu(hdr->frame_control) & IEEE80211_FCTL_FTYPE;
+	subtype = le16_to_cpu(hdr->frame_control) & IEEE80211_FCTL_STYPE;
+
+	if (ieee80211_is_back_req(fc))
+		return ath_bar_rx(sc, an, skb);
+
+	/* special aggregate processing only for qos unicast data frames */
+
+	if (!ieee80211_is_data(fc) ||
+	    !ieee80211_is_data_qos(fc) ||
+	    is_multicast_ether_addr(hdr->addr1))
+		return ath_rx_subframe(an, skb, rx_status);
+
+	/* lookup rx tid state */
+
+	if (ieee80211_is_data_qos(fc)) {
+		qc = ieee80211_get_qos_ctl(hdr);
+		tid = qc[0] & 0xf;
+	}
+
+	if (sc->sc_opmode == ATH9K_M_STA) {
+		/* Drop the frame not belonging to me. */
+		if (memcmp(hdr->addr1, sc->sc_myaddr, ETH_ALEN)) {
+			dev_kfree_skb(skb);
+			return -1;
+		}
+	}
+
+	rxtid = &an->an_aggr.rx.tid[tid];
+
+	spin_lock(&rxtid->tidlock);
+
+	rxdiff = (rxtid->baw_tail - rxtid->baw_head) &
+		(ATH_TID_MAX_BUFS - 1);
+
+	/*
+	 * If the ADDBA exchange has not been completed by the source,
+	 * process via legacy path (i.e. no reordering buffer is needed)
+	 */
+	if (!rxtid->addba_exchangecomplete) {
+		spin_unlock(&rxtid->tidlock);
+		return ath_rx_subframe(an, skb, rx_status);
+	}
+
+	/* extract sequence number from recvd frame */
+
+	rxseq = le16_to_cpu(hdr->seq_ctrl) >> IEEE80211_SEQ_SEQ_SHIFT;
+
+	if (rxtid->seq_reset) {
+		rxtid->seq_reset = 0;
+		rxtid->seq_next = rxseq;
+	}
+
+	index = ATH_BA_INDEX(rxtid->seq_next, rxseq);
+
+	/* drop frame if old sequence (index is too large) */
+
+	if (index > (IEEE80211_SEQ_MAX - (rxtid->baw_size << 2))) {
+		/* discard frame, ieee layer may not treat frame as a dup */
+		spin_unlock(&rxtid->tidlock);
+		dev_kfree_skb(skb);
+		return IEEE80211_FTYPE_DATA;
+	}
+
+	/* sequence number is beyond block-ack window */
+
+	if (index >= rxtid->baw_size) {
+
+		/* complete receive processing for all pending frames */
+
+		while (index >= rxtid->baw_size) {
+
+			rxbuf = rxtid->rxbuf + rxtid->baw_head;
+
+			if (rxbuf->rx_wbuf != NULL) {
+				ath_rx_subframe(an, rxbuf->rx_wbuf,
+						&rxbuf->rx_status);
+				rxbuf->rx_wbuf = NULL;
+			}
+
+			INCR(rxtid->baw_head, ATH_TID_MAX_BUFS);
+			INCR(rxtid->seq_next, IEEE80211_SEQ_MAX);
+
+			index--;
+		}
+	}
+
+	/* add buffer to the recv ba window */
+
+	cindex = (rxtid->baw_head + index) & (ATH_TID_MAX_BUFS - 1);
+	rxbuf = rxtid->rxbuf + cindex;
+
+	if (rxbuf->rx_wbuf != NULL) {
+		spin_unlock(&rxtid->tidlock);
+		/* duplicate frame */
+		dev_kfree_skb(skb);
+		return IEEE80211_FTYPE_DATA;
+	}
+
+	rxbuf->rx_wbuf = skb;
+	rxbuf->rx_time = get_timestamp();
+	rxbuf->rx_status = *rx_status;
+
+	/* advance tail if sequence received is newer
+	 * than any received so far */
+
+	if (index >= rxdiff) {
+		rxtid->baw_tail = cindex;
+		INCR(rxtid->baw_tail, ATH_TID_MAX_BUFS);
+	}
+
+	/* indicate all in-order received frames */
+
+	while (rxtid->baw_head != rxtid->baw_tail) {
+		rxbuf = rxtid->rxbuf + rxtid->baw_head;
+		if (!rxbuf->rx_wbuf)
+			break;
+
+		ath_rx_subframe(an, rxbuf->rx_wbuf, &rxbuf->rx_status);
+		rxbuf->rx_wbuf = NULL;
+
+		INCR(rxtid->baw_head, ATH_TID_MAX_BUFS);
+		INCR(rxtid->seq_next, IEEE80211_SEQ_MAX);
+	}
+
+	/*
+	 * start a timer to flush all received frames if there are pending
+	 * receive frames
+	 */
+	if (rxtid->baw_head != rxtid->baw_tail)
+		mod_timer(&rxtid->timer, ATH_RX_TIMEOUT);
+	else
+		del_timer_sync(&rxtid->timer);
+
+	spin_unlock(&rxtid->tidlock);
+	return IEEE80211_FTYPE_DATA;
+}
+
+/* Timer to flush all received sub-frames */
+
+static void ath_rx_timer(unsigned long data)
+{
+	struct ath_arx_tid *rxtid = (struct ath_arx_tid *)data;
+	struct ath_node *an = rxtid->an;
+	struct ath_rxbuf *rxbuf;
+	int nosched;
+
+	spin_lock_bh(&rxtid->tidlock);
+	while (rxtid->baw_head != rxtid->baw_tail) {
+		rxbuf = rxtid->rxbuf + rxtid->baw_head;
+		if (!rxbuf->rx_wbuf) {
+			INCR(rxtid->baw_head, ATH_TID_MAX_BUFS);
+			INCR(rxtid->seq_next, IEEE80211_SEQ_MAX);
+			continue;
+		}
+
+		/*
+		 * Stop if the next one is a very recent frame.
+		 *
+		 * Call get_timestamp in every iteration to protect against the
+		 * case in which a new frame is received while we are executing
+		 * this function. Using a timestamp obtained before entering
+		 * the loop could lead to a very large time interval
+		 * (a negative value typecast to unsigned), breaking the
+		 * function's logic.
+		 */
+		if ((get_timestamp() - rxbuf->rx_time) <
+			(ATH_RX_TIMEOUT * HZ / 1000))
+			break;
+
+		ath_rx_subframe(an, rxbuf->rx_wbuf,
+				&rxbuf->rx_status);
+		rxbuf->rx_wbuf = NULL;
+
+		INCR(rxtid->baw_head, ATH_TID_MAX_BUFS);
+		INCR(rxtid->seq_next, IEEE80211_SEQ_MAX);
+	}
+
+	/*
+	 * start a timer to flush all received frames if there are pending
+	 * receive frames
+	 */
+	if (rxtid->baw_head != rxtid->baw_tail)
+		nosched = 0;
+	else
+		nosched = 1; /* no need to re-arm the timer again */
+
+	spin_unlock_bh(&rxtid->tidlock);
+}
+
+/* Free all pending sub-frames in the re-ordering buffer */
+
+static void ath_rx_flush_tid(struct ath_softc *sc,
+	struct ath_arx_tid *rxtid, int drop)
+{
+	struct ath_rxbuf *rxbuf;
+	unsigned long flag;
+
+	spin_lock_irqsave(&rxtid->tidlock, flag);
+	while (rxtid->baw_head != rxtid->baw_tail) {
+		rxbuf = rxtid->rxbuf + rxtid->baw_head;
+		if (!rxbuf->rx_wbuf) {
+			INCR(rxtid->baw_head, ATH_TID_MAX_BUFS);
+			INCR(rxtid->seq_next, IEEE80211_SEQ_MAX);
+			continue;
+		}
+
+		if (drop)
+			dev_kfree_skb(rxbuf->rx_wbuf);
+		else
+			ath_rx_subframe(rxtid->an,
+					rxbuf->rx_wbuf,
+					&rxbuf->rx_status);
+
+		rxbuf->rx_wbuf = NULL;
+
+		INCR(rxtid->baw_head, ATH_TID_MAX_BUFS);
+		INCR(rxtid->seq_next, IEEE80211_SEQ_MAX);
+	}
+	spin_unlock_irqrestore(&rxtid->tidlock, flag);
+}
+
+static struct sk_buff *ath_rxbuf_alloc(struct ath_softc *sc,
+	u32 len)
+{
+	struct sk_buff *skb;
+	u32 off;
+
+	/*
+	 * Cache-line-align.  This is important (for the
+	 * 5210 at least) as not doing so causes bogus data
+	 * in rx'd frames.
+	 */
+
+	skb = dev_alloc_skb(len + sc->sc_cachelsz - 1);
+	if (skb != NULL) {
+		off = ((unsigned long) skb->data) % sc->sc_cachelsz;
+		if (off != 0)
+			skb_reserve(skb, sc->sc_cachelsz - off);
+	} else {
+		DPRINTF(sc, ATH_DBG_FATAL,
+			"%s: skbuff alloc of size %u failed\n",
+			__func__, len);
+		return NULL;
+	}
+
+	return skb;
+}
+
+static void ath_rx_requeue(struct ath_softc *sc, struct sk_buff *skb)
+{
+	struct ath_buf *bf = ATH_RX_CONTEXT(skb)->ctx_rxbuf;
+
+	ASSERT(bf != NULL);
+
+	spin_lock_bh(&sc->sc_rxbuflock);
+	if (bf->bf_status & ATH_BUFSTATUS_STALE) {
+		/*
+		 * This buffer is still held for hw acess.
+		 * Mark it as free to be re-queued it later.
+		 */
+		bf->bf_status |= ATH_BUFSTATUS_FREE;
+	} else {
+		/* XXX: we probably never enter here, remove after
+		 * verification */
+		list_add_tail(&bf->list, &sc->sc_rxbuf);
+		ath_rx_buf_link(sc, bf);
+	}
+	spin_unlock_bh(&sc->sc_rxbuflock);
+}
+
+/*
+ * The skb indicated to upper stack won't be returned to us.
+ * So we have to allocate a new one and queue it by ourselves.
+ */
+static int ath_rx_indicate(struct ath_softc *sc,
+			   struct sk_buff *skb,
+			   struct ath_recv_status *status,
+			   u16 keyix)
+{
+	struct ath_buf *bf = ATH_RX_CONTEXT(skb)->ctx_rxbuf;
+	struct sk_buff *nskb;
+	int type;
+
+	/* indicate frame to the stack, which will free the old skb. */
+	type = ath__rx_indicate(sc, skb, status, keyix);
+
+	/* allocate a new skb and queue it to for H/W processing */
+	nskb = ath_rxbuf_alloc(sc, sc->sc_rxbufsize);
+	if (nskb != NULL) {
+		bf->bf_mpdu = nskb;
+		bf->bf_buf_addr = ath_skb_map_single(sc,
+			nskb,
+			PCI_DMA_FROMDEVICE,
+			/* XXX: Remove get_dma_mem_context() */
+			get_dma_mem_context(bf, bf_dmacontext));
+		ATH_RX_CONTEXT(nskb)->ctx_rxbuf = bf;
+
+		/* queue the new wbuf to H/W */
+		ath_rx_requeue(sc, nskb);
+	}
+
+	return type;
+}
+
+static void ath_opmode_init(struct ath_softc *sc)
+{
+	struct ath_hal *ah = sc->sc_ah;
+	u32 rfilt, mfilt[2];
+
+	/* configure rx filter */
+	rfilt = ath_calcrxfilter(sc);
+	ath9k_hw_setrxfilter(ah, rfilt);
+
+	/* configure bssid mask */
+	if (ah->ah_caps.hw_caps & ATH9K_HW_CAP_BSSIDMASK)
+		ath9k_hw_setbssidmask(ah, sc->sc_bssidmask);
+
+	/* configure operational mode */
+	ath9k_hw_setopmode(ah);
+
+	/* Handle any link-level address change. */
+	ath9k_hw_setmac(ah, sc->sc_myaddr);
+
+	/* calculate and install multicast filter */
+	mfilt[0] = mfilt[1] = ~0;
+
+	ath9k_hw_setmcastfilter(ah, mfilt[0], mfilt[1]);
+	DPRINTF(sc, ATH_DBG_CONFIG ,
+		"%s: RX filter 0x%x, MC filter %08x:%08x\n",
+		__func__, rfilt, mfilt[0], mfilt[1]);
+}
+
+int ath_rx_init(struct ath_softc *sc, int nbufs)
+{
+	struct sk_buff *skb;
+	struct ath_buf *bf;
+	int error = 0;
+
+	do {
+		spin_lock_init(&sc->sc_rxflushlock);
+		sc->sc_rxflush = 0;
+		spin_lock_init(&sc->sc_rxbuflock);
+
+		/*
+		 * Cisco's VPN software requires that drivers be able to
+		 * receive encapsulated frames that are larger than the MTU.
+		 * Since we can't be sure how large a frame we'll get, setup
+		 * to handle the larges on possible.
+		 */
+		sc->sc_rxbufsize = roundup(IEEE80211_MAX_MPDU_LEN,
+					   min(sc->sc_cachelsz,
+					       (u16)64));
+
+		DPRINTF(sc, ATH_DBG_CONFIG, "%s: cachelsz %u rxbufsize %u\n",
+			__func__, sc->sc_cachelsz, sc->sc_rxbufsize);
+
+		/* Initialize rx descriptors */
+
+		error = ath_descdma_setup(sc, &sc->sc_rxdma, &sc->sc_rxbuf,
+					  "rx", nbufs, 1);
+		if (error != 0) {
+			DPRINTF(sc, ATH_DBG_FATAL,
+				"%s: failed to allocate rx descriptors: %d\n",
+				__func__, error);
+			break;
+		}
+
+		/* Pre-allocate a wbuf for each rx buffer */
+
+		list_for_each_entry(bf, &sc->sc_rxbuf, list) {
+			skb = ath_rxbuf_alloc(sc, sc->sc_rxbufsize);
+			if (skb == NULL) {
+				error = -ENOMEM;
+				break;
+			}
+
+			bf->bf_mpdu = skb;
+			bf->bf_buf_addr =
+				ath_skb_map_single(sc, skb, PCI_DMA_FROMDEVICE,
+				       get_dma_mem_context(bf, bf_dmacontext));
+			ATH_RX_CONTEXT(skb)->ctx_rxbuf = bf;
+		}
+		sc->sc_rxlink = NULL;
+
+	} while (0);
+
+	if (error)
+		ath_rx_cleanup(sc);
+
+	return error;
+}
+
+/* Reclaim all rx queue resources */
+
+void ath_rx_cleanup(struct ath_softc *sc)
+{
+	struct sk_buff *skb;
+	struct ath_buf *bf;
+
+	list_for_each_entry(bf, &sc->sc_rxbuf, list) {
+		skb = bf->bf_mpdu;
+		if (skb)
+			dev_kfree_skb(skb);
+	}
+
+	/* cleanup rx descriptors */
+
+	if (sc->sc_rxdma.dd_desc_len != 0)
+		ath_descdma_cleanup(sc, &sc->sc_rxdma, &sc->sc_rxbuf);
+}
+
+/*
+ * Calculate the receive filter according to the
+ * operating mode and state:
+ *
+ * o always accept unicast, broadcast, and multicast traffic
+ * o maintain current state of phy error reception (the hal
+ *   may enable phy error frames for noise immunity work)
+ * o probe request frames are accepted only when operating in
+ *   hostap, adhoc, or monitor modes
+ * o enable promiscuous mode according to the interface state
+ * o accept beacons:
+ *   - when operating in adhoc mode so the 802.11 layer creates
+ *     node table entries for peers,
+ *   - when operating in station mode for collecting rssi data when
+ *     the station is otherwise quiet, or
+ *   - when operating as a repeater so we see repeater-sta beacons
+ *   - when scanning
+ */
+
+u32 ath_calcrxfilter(struct ath_softc *sc)
+{
+#define	RX_FILTER_PRESERVE (ATH9K_RX_FILTER_PHYERR | ATH9K_RX_FILTER_PHYRADAR)
+	u32 rfilt;
+
+	rfilt = (ath9k_hw_getrxfilter(sc->sc_ah) & RX_FILTER_PRESERVE)
+		| ATH9K_RX_FILTER_UCAST | ATH9K_RX_FILTER_BCAST
+		| ATH9K_RX_FILTER_MCAST;
+
+	/* If not a STA, enable processing of Probe Requests */
+	if (sc->sc_opmode != ATH9K_M_STA)
+		rfilt |= ATH9K_RX_FILTER_PROBEREQ;
+
+	/* Can't set HOSTAP into promiscous mode */
+	if (sc->sc_opmode == ATH9K_M_MONITOR) {
+		rfilt |= ATH9K_RX_FILTER_PROM;
+		/* ??? To prevent from sending ACK */
+		rfilt &= ~ATH9K_RX_FILTER_UCAST;
+	}
+
+	if (sc->sc_opmode == ATH9K_M_STA || sc->sc_opmode == ATH9K_M_IBSS ||
+	    sc->sc_scanning)
+		rfilt |= ATH9K_RX_FILTER_BEACON;
+
+	/* If in HOSTAP mode, want to enable reception of PSPOLL frames
+	   & beacon frames */
+	if (sc->sc_opmode == ATH9K_M_HOSTAP)
+		rfilt |= (ATH9K_RX_FILTER_BEACON | ATH9K_RX_FILTER_PSPOLL);
+	return rfilt;
+#undef RX_FILTER_PRESERVE
+}
+
+/* Enable the receive h/w following a reset. */
+
+int ath_startrecv(struct ath_softc *sc)
+{
+	struct ath_hal *ah = sc->sc_ah;
+	struct ath_buf *bf, *tbf;
+
+	spin_lock_bh(&sc->sc_rxbuflock);
+	if (list_empty(&sc->sc_rxbuf))
+		goto start_recv;
+
+	sc->sc_rxlink = NULL;
+	list_for_each_entry_safe(bf, tbf, &sc->sc_rxbuf, list) {
+		if (bf->bf_status & ATH_BUFSTATUS_STALE) {
+			/* restarting h/w, no need for holding descriptors */
+			bf->bf_status &= ~ATH_BUFSTATUS_STALE;
+			/*
+			 * Upper layer may not be done with the frame yet so
+			 * we can't just re-queue it to hardware. Remove it
+			 * from h/w queue. It'll be re-queued when upper layer
+			 * returns the frame and ath_rx_requeue_mpdu is called.
+			 */
+			if (!(bf->bf_status & ATH_BUFSTATUS_FREE)) {
+				list_del(&bf->list);
+				continue;
+			}
+		}
+		/* chain descriptors */
+		ath_rx_buf_link(sc, bf);
+	}
+
+	/* We could have deleted elements so the list may be empty now */
+	if (list_empty(&sc->sc_rxbuf))
+		goto start_recv;
+
+	bf = list_first_entry(&sc->sc_rxbuf, struct ath_buf, list);
+	ath9k_hw_putrxbuf(ah, bf->bf_daddr);
+	ath9k_hw_rxena(ah);      /* enable recv descriptors */
+
+start_recv:
+	spin_unlock_bh(&sc->sc_rxbuflock);
+	ath_opmode_init(sc);        /* set filters, etc. */
+	ath9k_hw_startpcureceive(ah);	/* re-enable PCU/DMA engine */
+	return 0;
+}
+
+/* Disable the receive h/w in preparation for a reset. */
+
+bool ath_stoprecv(struct ath_softc *sc)
+{
+	struct ath_hal *ah = sc->sc_ah;
+	u64 tsf;
+	bool stopped;
+
+	ath9k_hw_stoppcurecv(ah);	/* disable PCU */
+	ath9k_hw_setrxfilter(ah, 0);	/* clear recv filter */
+	stopped = ath9k_hw_stopdmarecv(ah);	/* disable DMA engine */
+	mdelay(3);			/* 3ms is long enough for 1 frame */
+	tsf = ath9k_hw_gettsf64(ah);
+	sc->sc_rxlink = NULL;		/* just in case */
+	return stopped;
+}
+
+/* Flush receive queue */
+
+void ath_flushrecv(struct ath_softc *sc)
+{
+	/*
+	 * ath_rx_tasklet may be used to handle rx interrupt and flush receive
+	 * queue at the same time. Use a lock to serialize the access of rx
+	 * queue.
+	 * ath_rx_tasklet cannot hold the spinlock while indicating packets.
+	 * Instead, do not claim the spinlock but check for a flush in
+	 * progress (see references to sc_rxflush)
+	 */
+	spin_lock_bh(&sc->sc_rxflushlock);
+	sc->sc_rxflush = 1;
+
+	ath_rx_tasklet(sc, 1);
+
+	sc->sc_rxflush = 0;
+	spin_unlock_bh(&sc->sc_rxflushlock);
+}
+
+/* Process an individual frame */
+
+int ath_rx_input(struct ath_softc *sc,
+		 struct ath_node *an,
+		 int is_ampdu,
+		 struct sk_buff *skb,
+		 struct ath_recv_status *rx_status,
+		 enum ATH_RX_TYPE *status)
+{
+	if (is_ampdu && sc->sc_rxaggr) {
+		*status = ATH_RX_CONSUMED;
+		return ath_ampdu_input(sc, an, skb, rx_status);
+	} else {
+		*status = ATH_RX_NON_CONSUMED;
+		return -1;
+	}
+}
+
+/* Process receive queue, as well as LED, etc. */
+
+int ath_rx_tasklet(struct ath_softc *sc, int flush)
+{
+#define PA2DESC(_sc, _pa)                                               \
+	((struct ath_desc *)((caddr_t)(_sc)->sc_rxdma.dd_desc +		\
+			     ((_pa) - (_sc)->sc_rxdma.dd_desc_paddr)))
+
+	struct ath_buf *bf, *bf_held = NULL;
+	struct ath_desc *ds;
+	struct ieee80211_hdr *hdr;
+	struct sk_buff *skb = NULL;
+	struct ath_recv_status rx_status;
+	struct ath_hal *ah = sc->sc_ah;
+	int type, rx_processed = 0;
+	u32 phyerr;
+	u8 chainreset = 0;
+	int retval;
+	__le16 fc;
+
+	do {
+		/* If handling rx interrupt and flush is in progress => exit */
+		if (sc->sc_rxflush && (flush == 0))
+			break;
+
+		spin_lock_bh(&sc->sc_rxbuflock);
+		if (list_empty(&sc->sc_rxbuf)) {
+			sc->sc_rxlink = NULL;
+			spin_unlock_bh(&sc->sc_rxbuflock);
+			break;
+		}
+
+		bf = list_first_entry(&sc->sc_rxbuf, struct ath_buf, list);
+
+		/*
+		 * There is a race condition that BH gets scheduled after sw
+		 * writes RxE and before hw re-load the last descriptor to get
+		 * the newly chained one. Software must keep the last DONE
+		 * descriptor as a holding descriptor - software does so by
+		 * marking it with the STALE flag.
+		 */
+		if (bf->bf_status & ATH_BUFSTATUS_STALE) {
+			bf_held = bf;
+			if (list_is_last(&bf_held->list, &sc->sc_rxbuf)) {
+				/*
+				 * The holding descriptor is the last
+				 * descriptor in queue. It's safe to
+				 * remove the last holding descriptor
+				 * in BH context.
+				 */
+				list_del(&bf_held->list);
+				bf_held->bf_status &= ~ATH_BUFSTATUS_STALE;
+				sc->sc_rxlink = NULL;
+
+				if (bf_held->bf_status & ATH_BUFSTATUS_FREE) {
+					list_add_tail(&bf_held->list,
+						&sc->sc_rxbuf);
+					ath_rx_buf_link(sc, bf_held);
+				}
+				spin_unlock_bh(&sc->sc_rxbuflock);
+				break;
+			}
+			bf = list_entry(bf->list.next, struct ath_buf, list);
+		}
+
+		ds = bf->bf_desc;
+		++rx_processed;
+
+		/*
+		 * Must provide the virtual address of the current
+		 * descriptor, the physical address, and the virtual
+		 * address of the next descriptor in the h/w chain.
+		 * This allows the HAL to look ahead to see if the
+		 * hardware is done with a descriptor by checking the
+		 * done bit in the following descriptor and the address
+		 * of the current descriptor the DMA engine is working
+		 * on.  All this is necessary because of our use of
+		 * a self-linked list to avoid rx overruns.
+		 */
+		retval = ath9k_hw_rxprocdesc(ah,
+					     ds,
+					     bf->bf_daddr,
+					     PA2DESC(sc, ds->ds_link),
+					     0);
+		if (retval == -EINPROGRESS) {
+			struct ath_buf *tbf;
+			struct ath_desc *tds;
+
+			if (list_is_last(&bf->list, &sc->sc_rxbuf)) {
+				spin_unlock_bh(&sc->sc_rxbuflock);
+				break;
+			}
+
+			tbf = list_entry(bf->list.next, struct ath_buf, list);
+
+			/*
+			 * On some hardware the descriptor status words could
+			 * get corrupted, including the done bit. Because of
+			 * this, check if the next descriptor's done bit is
+			 * set or not.
+			 *
+			 * If the next descriptor's done bit is set, the current
+			 * descriptor has been corrupted. Force s/w to discard
+			 * this descriptor and continue...
+			 */
+
+			tds = tbf->bf_desc;
+			retval = ath9k_hw_rxprocdesc(ah,
+				tds, tbf->bf_daddr,
+				PA2DESC(sc, tds->ds_link), 0);
+			if (retval == -EINPROGRESS) {
+				spin_unlock_bh(&sc->sc_rxbuflock);
+				break;
+			}
+		}
+
+		/* XXX: we do not support frames spanning
+		 * multiple descriptors */
+		bf->bf_status |= ATH_BUFSTATUS_DONE;
+
+		skb = bf->bf_mpdu;
+		if (skb == NULL) {		/* XXX ??? can this happen */
+			spin_unlock_bh(&sc->sc_rxbuflock);
+			continue;
+		}
+		/*
+		 * Now we know it's a completed frame, we can indicate the
+		 * frame. Remove the previous holding descriptor and leave
+		 * this one in the queue as the new holding descriptor.
+		 */
+		if (bf_held) {
+			list_del(&bf_held->list);
+			bf_held->bf_status &= ~ATH_BUFSTATUS_STALE;
+			if (bf_held->bf_status & ATH_BUFSTATUS_FREE) {
+				list_add_tail(&bf_held->list, &sc->sc_rxbuf);
+				/* try to requeue this descriptor */
+				ath_rx_buf_link(sc, bf_held);
+			}
+		}
+
+		bf->bf_status |= ATH_BUFSTATUS_STALE;
+		bf_held = bf;
+		/*
+		 * Release the lock here in case ieee80211_input() return
+		 * the frame immediately by calling ath_rx_mpdu_requeue().
+		 */
+		spin_unlock_bh(&sc->sc_rxbuflock);
+
+		if (flush) {
+			/*
+			 * If we're asked to flush receive queue, directly
+			 * chain it back at the queue without processing it.
+			 */
+			goto rx_next;
+		}
+
+		hdr = (struct ieee80211_hdr *)skb->data;
+		fc = hdr->frame_control;
+		memzero(&rx_status, sizeof(struct ath_recv_status));
+
+		if (ds->ds_rxstat.rs_more) {
+			/*
+			 * Frame spans multiple descriptors; this
+			 * cannot happen yet as we don't support
+			 * jumbograms.  If not in monitor mode,
+			 * discard the frame.
+			 */
+#ifndef ERROR_FRAMES
+			/*
+			 * Enable this if you want to see
+			 * error frames in Monitor mode.
+			 */
+			if (sc->sc_opmode != ATH9K_M_MONITOR)
+				goto rx_next;
+#endif
+			/* fall thru for monitor mode handling... */
+		} else if (ds->ds_rxstat.rs_status != 0) {
+			if (ds->ds_rxstat.rs_status & ATH9K_RXERR_CRC)
+				rx_status.flags |= ATH_RX_FCS_ERROR;
+			if (ds->ds_rxstat.rs_status & ATH9K_RXERR_PHY) {
+				phyerr = ds->ds_rxstat.rs_phyerr & 0x1f;
+				goto rx_next;
+			}
+
+			if (ds->ds_rxstat.rs_status & ATH9K_RXERR_DECRYPT) {
+				/*
+				 * Decrypt error. We only mark packet status
+				 * here and always push up the frame up to let
+				 * mac80211 handle the actual error case, be
+				 * it no decryption key or real decryption
+				 * error. This let us keep statistics there.
+				 */
+				rx_status.flags |= ATH_RX_DECRYPT_ERROR;
+			} else if (ds->ds_rxstat.rs_status & ATH9K_RXERR_MIC) {
+				/*
+				 * Demic error. We only mark frame status here
+				 * and always push up the frame up to let
+				 * mac80211 handle the actual error case. This
+				 * let us keep statistics there. Hardware may
+				 * post a false-positive MIC error.
+				 */
+				if (ieee80211_is_ctl(fc))
+					/*
+					 * Sometimes, we get invalid
+					 * MIC failures on valid control frames.
+					 * Remove these mic errors.
+					 */
+					ds->ds_rxstat.rs_status &=
+						~ATH9K_RXERR_MIC;
+				else
+					rx_status.flags |= ATH_RX_MIC_ERROR;
+			}
+			/*
+			 * Reject error frames with the exception of
+			 * decryption and MIC failures. For monitor mode,
+			 * we also ignore the CRC error.
+			 */
+			if (sc->sc_opmode == ATH9K_M_MONITOR) {
+				if (ds->ds_rxstat.rs_status &
+				    ~(ATH9K_RXERR_DECRYPT | ATH9K_RXERR_MIC |
+					ATH9K_RXERR_CRC))
+					goto rx_next;
+			} else {
+				if (ds->ds_rxstat.rs_status &
+				    ~(ATH9K_RXERR_DECRYPT | ATH9K_RXERR_MIC)) {
+					goto rx_next;
+				}
+			}
+		}
+		/*
+		 * The status portion of the descriptor could get corrupted.
+		 */
+		if (sc->sc_rxbufsize < ds->ds_rxstat.rs_datalen)
+			goto rx_next;
+		/*
+		 * Sync and unmap the frame.  At this point we're
+		 * committed to passing the sk_buff somewhere so
+		 * clear buf_skb; this means a new sk_buff must be
+		 * allocated when the rx descriptor is setup again
+		 * to receive another frame.
+		 */
+		skb_put(skb, ds->ds_rxstat.rs_datalen);
+		skb->protocol = cpu_to_be16(ETH_P_CONTROL);
+		rx_status.tsf = ath_extend_tsf(sc, ds->ds_rxstat.rs_tstamp);
+		rx_status.rateieee =
+			sc->sc_hwmap[ds->ds_rxstat.rs_rate].ieeerate;
+		rx_status.rateKbps =
+			sc->sc_hwmap[ds->ds_rxstat.rs_rate].rateKbps;
+		rx_status.ratecode = ds->ds_rxstat.rs_rate;
+
+		/* HT rate */
+		if (rx_status.ratecode & 0x80) {
+			/* TODO - add table to avoid division */
+			if (ds->ds_rxstat.rs_flags & ATH9K_RX_2040) {
+				rx_status.flags |= ATH_RX_40MHZ;
+				rx_status.rateKbps =
+					(rx_status.rateKbps * 27) / 13;
+			}
+			if (ds->ds_rxstat.rs_flags & ATH9K_RX_GI)
+				rx_status.rateKbps =
+					(rx_status.rateKbps * 10) / 9;
+			else
+				rx_status.flags |= ATH_RX_SHORT_GI;
+		}
+
+		/* sc->sc_noise_floor is only available when the station
+		   attaches to an AP, so we use a default value
+		   if we are not yet attached. */
+
+		/* XXX we should use either sc->sc_noise_floor or
+		 * ath_hal_getChanNoise(ah, &sc->sc_curchan)
+		 * to calculate the noise floor.
+		 * However, the value returned by ath_hal_getChanNoise
+		 * seems to be incorrect (-31dBm on the last test),
+		 * so we will use a hard-coded value until we
+		 * figure out what is going on.
+		 */
+		rx_status.abs_rssi =
+			ds->ds_rxstat.rs_rssi + ATH_DEFAULT_NOISE_FLOOR;
+
+		pci_dma_sync_single_for_cpu(sc->pdev,
+					    bf->bf_buf_addr,
+					    skb_tailroom(skb),
+					    PCI_DMA_FROMDEVICE);
+		pci_unmap_single(sc->pdev,
+				 bf->bf_buf_addr,
+				 sc->sc_rxbufsize,
+				 PCI_DMA_FROMDEVICE);
+
+		/* XXX: Ah! make me more readable, use a helper */
+		if (ah->ah_caps.hw_caps & ATH9K_HW_CAP_HT) {
+			if (ds->ds_rxstat.rs_moreaggr == 0) {
+				rx_status.rssictl[0] =
+					ds->ds_rxstat.rs_rssi_ctl0;
+				rx_status.rssictl[1] =
+					ds->ds_rxstat.rs_rssi_ctl1;
+				rx_status.rssictl[2] =
+					ds->ds_rxstat.rs_rssi_ctl2;
+				rx_status.rssi = ds->ds_rxstat.rs_rssi;
+				if (ds->ds_rxstat.rs_flags & ATH9K_RX_2040) {
+					rx_status.rssiextn[0] =
+						ds->ds_rxstat.rs_rssi_ext0;
+					rx_status.rssiextn[1] =
+						ds->ds_rxstat.rs_rssi_ext1;
+					rx_status.rssiextn[2] =
+						ds->ds_rxstat.rs_rssi_ext2;
+					rx_status.flags |=
+						ATH_RX_RSSI_EXTN_VALID;
+				}
+				rx_status.flags |= ATH_RX_RSSI_VALID |
+					ATH_RX_CHAIN_RSSI_VALID;
+			}
+		} else {
+			/*
+			 * Need to insert the "combined" rssi into the
+			 * status structure for upper layer processing
+			 */
+			rx_status.rssi = ds->ds_rxstat.rs_rssi;
+			rx_status.flags |= ATH_RX_RSSI_VALID;
+		}
+
+		/* Pass frames up to the stack. */
+
+		type = ath_rx_indicate(sc, skb,
+			&rx_status, ds->ds_rxstat.rs_keyix);
+
+		/*
+		 * change the default rx antenna if rx diversity chooses the
+		 * other antenna 3 times in a row.
+		 */
+		if (sc->sc_defant != ds->ds_rxstat.rs_antenna) {
+			if (++sc->sc_rxotherant >= 3)
+				ath_setdefantenna(sc,
+						ds->ds_rxstat.rs_antenna);
+		} else {
+			sc->sc_rxotherant = 0;
+		}
+
+#ifdef CONFIG_SLOW_ANT_DIV
+		if ((rx_status.flags & ATH_RX_RSSI_VALID) &&
+		    ieee80211_is_beacon(fc)) {
+			ath_slow_ant_div(&sc->sc_antdiv, hdr, &ds->ds_rxstat);
+		}
+#endif
+		/*
+		 * For frames successfully indicated, the buffer will be
+		 * returned to us by upper layers by calling
+		 * ath_rx_mpdu_requeue, either synchronusly or asynchronously.
+		 * So we don't want to do it here in this loop.
+		 */
+		continue;
+
+rx_next:
+		bf->bf_status |= ATH_BUFSTATUS_FREE;
+	} while (TRUE);
+
+	if (chainreset) {
+		DPRINTF(sc, ATH_DBG_CONFIG,
+			"%s: Reset rx chain mask. "
+			"Do internal reset\n", __func__);
+		ASSERT(flush == 0);
+		ath_internal_reset(sc);
+	}
+
+	return 0;
+#undef PA2DESC
+}
+
+/* Process ADDBA request in per-TID data structure */
+
+int ath_rx_aggr_start(struct ath_softc *sc,
+		      const u8 *addr,
+		      u16 tid,
+		      u16 *ssn)
+{
+	struct ath_arx_tid *rxtid;
+	struct ath_node *an;
+	struct ieee80211_hw *hw = sc->hw;
+	struct ieee80211_supported_band *sband;
+	u16 buffersize = 0;
+
+	spin_lock_bh(&sc->node_lock);
+	an = ath_node_find(sc, (u8 *) addr);
+	spin_unlock_bh(&sc->node_lock);
+
+	if (!an) {
+		DPRINTF(sc, ATH_DBG_AGGR,
+			"%s: Node not found to initialize RX aggregation\n",
+			__func__);
+		return -1;
+	}
+
+	sband = hw->wiphy->bands[hw->conf.channel->band];
+	buffersize = IEEE80211_MIN_AMPDU_BUF <<
+		sband->ht_info.ampdu_factor; /* FIXME */
+
+	rxtid = &an->an_aggr.rx.tid[tid];
+
+	spin_lock_bh(&rxtid->tidlock);
+	if (sc->sc_rxaggr) {
+		/* Allow aggregation reception
+		 * Adjust rx BA window size. Peer might indicate a
+		 * zero buffer size for a _dont_care_ condition.
+		 */
+		if (buffersize)
+			rxtid->baw_size = min(buffersize, rxtid->baw_size);
+
+		/* set rx sequence number */
+		rxtid->seq_next = *ssn;
+
+		/* Allocate the receive buffers for this TID */
+		DPRINTF(sc, ATH_DBG_AGGR,
+			"%s: Allcating rxbuffer for TID %d\n", __func__, tid);
+
+		if (rxtid->rxbuf == NULL) {
+			/*
+			* If the rxbuff is not NULL at this point, we *probably*
+			* already allocated the buffer on a previous ADDBA,
+			* and this is a subsequent ADDBA that got through.
+			* Don't allocate, but use the value in the pointer,
+			* we zero it out when we de-allocate.
+			*/
+			rxtid->rxbuf = kmalloc(ATH_TID_MAX_BUFS *
+				sizeof(struct ath_rxbuf), GFP_ATOMIC);
+		}
+		if (rxtid->rxbuf == NULL) {
+			DPRINTF(sc, ATH_DBG_AGGR,
+				"%s: Unable to allocate RX buffer, "
+				"refusing ADDBA\n", __func__);
+		} else {
+			/* Ensure the memory is zeroed out (all internal
+			 * pointers are null) */
+			memzero(rxtid->rxbuf, ATH_TID_MAX_BUFS *
+				sizeof(struct ath_rxbuf));
+			DPRINTF(sc, ATH_DBG_AGGR,
+				"%s: Allocated @%p\n", __func__, rxtid->rxbuf);
+
+			/* Allow aggregation reception */
+			rxtid->addba_exchangecomplete = 1;
+		}
+	}
+	spin_unlock_bh(&rxtid->tidlock);
+
+	return 0;
+}
+
+/* Process DELBA */
+
+int ath_rx_aggr_stop(struct ath_softc *sc,
+		     const u8 *addr,
+		     u16 tid)
+{
+	struct ath_node *an;
+
+	spin_lock_bh(&sc->node_lock);
+	an = ath_node_find(sc, (u8 *) addr);
+	spin_unlock_bh(&sc->node_lock);
+
+	if (!an) {
+		DPRINTF(sc, ATH_DBG_AGGR,
+			"%s: RX aggr stop for non-existent node\n", __func__);
+		return -1;
+	}
+
+	ath_rx_aggr_teardown(sc, an, tid);
+	return 0;
+}
+
+/* Rx aggregation tear down */
+
+void ath_rx_aggr_teardown(struct ath_softc *sc,
+	struct ath_node *an, u8 tid)
+{
+	struct ath_arx_tid *rxtid = &an->an_aggr.rx.tid[tid];
+
+	if (!rxtid->addba_exchangecomplete)
+		return;
+
+	del_timer_sync(&rxtid->timer);
+	ath_rx_flush_tid(sc, rxtid, 0);
+	rxtid->addba_exchangecomplete = 0;
+
+	/* De-allocate the receive buffer array allocated when addba started */
+
+	if (rxtid->rxbuf) {
+		DPRINTF(sc, ATH_DBG_AGGR,
+			"%s: Deallocating TID %d rxbuff @%p\n",
+			__func__, tid, rxtid->rxbuf);
+		kfree(rxtid->rxbuf);
+
+		/* Set pointer to null to avoid reuse*/
+		rxtid->rxbuf = NULL;
+	}
+}
+
+/* Initialize per-node receive state */
+
+void ath_rx_node_init(struct ath_softc *sc, struct ath_node *an)
+{
+	if (sc->sc_rxaggr) {
+		struct ath_arx_tid *rxtid;
+		int tidno;
+
+		/* Init per tid rx state */
+		for (tidno = 0, rxtid = &an->an_aggr.rx.tid[tidno];
+				tidno < WME_NUM_TID;
+				tidno++, rxtid++) {
+			rxtid->an        = an;
+			rxtid->seq_reset = 1;
+			rxtid->seq_next  = 0;
+			rxtid->baw_size  = WME_MAX_BA;
+			rxtid->baw_head  = rxtid->baw_tail = 0;
+
+			/*
+			 * Ensure the buffer pointer is null at this point
+			 * (needs to be allocated when addba is received)
+			*/
+
+			rxtid->rxbuf     = NULL;
+			setup_timer(&rxtid->timer, ath_rx_timer,
+				(unsigned long)rxtid);
+			spin_lock_init(&rxtid->tidlock);
+
+			/* ADDBA state */
+			rxtid->addba_exchangecomplete = 0;
+		}
+	}
+}
+
+void ath_rx_node_cleanup(struct ath_softc *sc, struct ath_node *an)
+{
+	if (sc->sc_rxaggr) {
+		struct ath_arx_tid *rxtid;
+		int tidno, i;
+
+		/* Init per tid rx state */
+		for (tidno = 0, rxtid = &an->an_aggr.rx.tid[tidno];
+				tidno < WME_NUM_TID;
+				tidno++, rxtid++) {
+
+			if (!rxtid->addba_exchangecomplete)
+				continue;
+
+			/* must cancel timer first */
+			del_timer_sync(&rxtid->timer);
+
+			/* drop any pending sub-frames */
+			ath_rx_flush_tid(sc, rxtid, 1);
+
+			for (i = 0; i < ATH_TID_MAX_BUFS; i++)
+				ASSERT(rxtid->rxbuf[i].rx_wbuf == NULL);
+
+			rxtid->addba_exchangecomplete = 0;
+		}
+	}
+
+}
+
+/* Cleanup per-node receive state */
+
+void ath_rx_node_free(struct ath_softc *sc, struct ath_node *an)
+{
+	ath_rx_node_cleanup(sc, an);
+}
+
+dma_addr_t ath_skb_map_single(struct ath_softc *sc,
+			      struct sk_buff *skb,
+			      int direction,
+			      dma_addr_t *pa)
+{
+	/*
+	 * NB: do NOT use skb->len, which is 0 on initialization.
+	 * Use skb's entire data area instead.
+	 */
+	*pa = pci_map_single(sc->pdev, skb->data,
+		skb_end_pointer(skb) - skb->head, direction);
+	return *pa;
+}
+
+void ath_skb_unmap_single(struct ath_softc *sc,
+			  struct sk_buff *skb,
+			  int direction,
+			  dma_addr_t *pa)
+{
+	/* Unmap skb's entire data area */
+	pci_unmap_single(sc->pdev, *pa,
+		skb_end_pointer(skb) - skb->head, direction);
+}
diff --git a/drivers/net/wireless/ath9k/reg.h b/drivers/net/wireless/ath9k/reg.h
new file mode 100644
index 000000000000..42b0890a4685
--- /dev/null
+++ b/drivers/net/wireless/ath9k/reg.h
@@ -0,0 +1,1385 @@
+/*
+ * Copyright (c) 2008 Atheros Communications Inc.
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#ifndef REG_H
+#define REG_H
+
+#define AR_CR                0x0008
+#define AR_CR_RXE            0x00000004
+#define AR_CR_RXD            0x00000020
+#define AR_CR_SWI            0x00000040
+
+#define AR_RXDP              0x000C
+
+#define AR_CFG               0x0014
+#define AR_CFG_SWTD          0x00000001
+#define AR_CFG_SWTB          0x00000002
+#define AR_CFG_SWRD          0x00000004
+#define AR_CFG_SWRB          0x00000008
+#define AR_CFG_SWRG          0x00000010
+#define AR_CFG_AP_ADHOC_INDICATION 0x00000020
+#define AR_CFG_PHOK          0x00000100
+#define AR_CFG_CLK_GATE_DIS  0x00000400
+#define AR_CFG_EEBS          0x00000200
+#define AR_CFG_PCI_MASTER_REQ_Q_THRESH         0x00060000
+#define AR_CFG_PCI_MASTER_REQ_Q_THRESH_S       17
+
+#define AR_MIRT              0x0020
+#define AR_MIRT_VAL          0x0000ffff
+#define AR_MIRT_VAL_S        16
+
+#define AR_IER               0x0024
+#define AR_IER_ENABLE        0x00000001
+#define AR_IER_DISABLE       0x00000000
+
+#define AR_TIMT              0x0028
+#define AR_TIMT_LAST         0x0000ffff
+#define AR_TIMT_LAST_S       0
+#define AR_TIMT_FIRST        0xffff0000
+#define AR_TIMT_FIRST_S      16
+
+#define AR_RIMT              0x002C
+#define AR_RIMT_LAST         0x0000ffff
+#define AR_RIMT_LAST_S       0
+#define AR_RIMT_FIRST        0xffff0000
+#define AR_RIMT_FIRST_S      16
+
+#define AR_DMASIZE_4B        0x00000000
+#define AR_DMASIZE_8B        0x00000001
+#define AR_DMASIZE_16B       0x00000002
+#define AR_DMASIZE_32B       0x00000003
+#define AR_DMASIZE_64B       0x00000004
+#define AR_DMASIZE_128B      0x00000005
+#define AR_DMASIZE_256B      0x00000006
+#define AR_DMASIZE_512B      0x00000007
+
+#define AR_TXCFG             0x0030
+#define AR_TXCFG_DMASZ_MASK  0x00000003
+#define AR_TXCFG_DMASZ_4B    0
+#define AR_TXCFG_DMASZ_8B    1
+#define AR_TXCFG_DMASZ_16B   2
+#define AR_TXCFG_DMASZ_32B   3
+#define AR_TXCFG_DMASZ_64B   4
+#define AR_TXCFG_DMASZ_128B  5
+#define AR_TXCFG_DMASZ_256B  6
+#define AR_TXCFG_DMASZ_512B  7
+#define AR_FTRIG             0x000003F0
+#define AR_FTRIG_S           4
+#define AR_FTRIG_IMMED       0x00000000
+#define AR_FTRIG_64B         0x00000010
+#define AR_FTRIG_128B        0x00000020
+#define AR_FTRIG_192B        0x00000030
+#define AR_FTRIG_256B        0x00000040
+#define AR_FTRIG_512B        0x00000080
+#define AR_TXCFG_ADHOC_BEACON_ATIM_TX_POLICY 0x00000800
+
+#define AR_RXCFG             0x0034
+#define AR_RXCFG_CHIRP       0x00000008
+#define AR_RXCFG_ZLFDMA      0x00000010
+#define AR_RXCFG_DMASZ_MASK  0x00000007
+#define AR_RXCFG_DMASZ_4B    0
+#define AR_RXCFG_DMASZ_8B    1
+#define AR_RXCFG_DMASZ_16B   2
+#define AR_RXCFG_DMASZ_32B   3
+#define AR_RXCFG_DMASZ_64B   4
+#define AR_RXCFG_DMASZ_128B  5
+#define AR_RXCFG_DMASZ_256B  6
+#define AR_RXCFG_DMASZ_512B  7
+
+#define AR_MIBC              0x0040
+#define AR_MIBC_COW          0x00000001
+#define AR_MIBC_FMC          0x00000002
+#define AR_MIBC_CMC          0x00000004
+#define AR_MIBC_MCS          0x00000008
+
+#define AR_TOPS              0x0044
+#define AR_TOPS_MASK         0x0000FFFF
+
+#define AR_RXNPTO            0x0048
+#define AR_RXNPTO_MASK       0x000003FF
+
+#define AR_TXNPTO            0x004C
+#define AR_TXNPTO_MASK       0x000003FF
+#define AR_TXNPTO_QCU_MASK   0x000FFC00
+
+#define AR_RPGTO             0x0050
+#define AR_RPGTO_MASK        0x000003FF
+
+#define AR_RPCNT             0x0054
+#define AR_RPCNT_MASK        0x0000001F
+
+#define AR_MACMISC           0x0058
+#define AR_MACMISC_PCI_EXT_FORCE        0x00000010
+#define AR_MACMISC_DMA_OBS              0x000001E0
+#define AR_MACMISC_DMA_OBS_S            5
+#define AR_MACMISC_DMA_OBS_LINE_0       0
+#define AR_MACMISC_DMA_OBS_LINE_1       1
+#define AR_MACMISC_DMA_OBS_LINE_2       2
+#define AR_MACMISC_DMA_OBS_LINE_3       3
+#define AR_MACMISC_DMA_OBS_LINE_4       4
+#define AR_MACMISC_DMA_OBS_LINE_5       5
+#define AR_MACMISC_DMA_OBS_LINE_6       6
+#define AR_MACMISC_DMA_OBS_LINE_7       7
+#define AR_MACMISC_DMA_OBS_LINE_8       8
+#define AR_MACMISC_MISC_OBS             0x00000E00
+#define AR_MACMISC_MISC_OBS_S           9
+#define AR_MACMISC_MISC_OBS_BUS_LSB     0x00007000
+#define AR_MACMISC_MISC_OBS_BUS_LSB_S   12
+#define AR_MACMISC_MISC_OBS_BUS_MSB     0x00038000
+#define AR_MACMISC_MISC_OBS_BUS_MSB_S   15
+#define AR_MACMISC_MISC_OBS_BUS_1       1
+
+#define AR_GTXTO    0x0064
+#define AR_GTXTO_TIMEOUT_COUNTER    0x0000FFFF
+#define AR_GTXTO_TIMEOUT_LIMIT      0xFFFF0000
+#define AR_GTXTO_TIMEOUT_LIMIT_S    16
+
+#define AR_GTTM     0x0068
+#define AR_GTTM_USEC          0x00000001
+#define AR_GTTM_IGNORE_IDLE   0x00000002
+#define AR_GTTM_RESET_IDLE    0x00000004
+#define AR_GTTM_CST_USEC      0x00000008
+
+#define AR_CST         0x006C
+#define AR_CST_TIMEOUT_COUNTER    0x0000FFFF
+#define AR_CST_TIMEOUT_LIMIT      0xFFFF0000
+#define AR_CST_TIMEOUT_LIMIT_S    16
+
+#define AR_SREV_VERSION_9100                  0x014
+
+#define AR_SREV_5416_V20_OR_LATER(_ah) \
+	(AR_SREV_9100((_ah)) || AR_SREV_5416_20_OR_LATER(_ah))
+#define AR_SREV_5416_V22_OR_LATER(_ah) \
+	(AR_SREV_9100((_ah)) || AR_SREV_5416_22_OR_LATER(_ah))
+
+#define AR_ISR               0x0080
+#define AR_ISR_RXOK          0x00000001
+#define AR_ISR_RXDESC        0x00000002
+#define AR_ISR_RXERR         0x00000004
+#define AR_ISR_RXNOPKT       0x00000008
+#define AR_ISR_RXEOL         0x00000010
+#define AR_ISR_RXORN         0x00000020
+#define AR_ISR_TXOK          0x00000040
+#define AR_ISR_TXDESC        0x00000080
+#define AR_ISR_TXERR         0x00000100
+#define AR_ISR_TXNOPKT       0x00000200
+#define AR_ISR_TXEOL         0x00000400
+#define AR_ISR_TXURN         0x00000800
+#define AR_ISR_MIB           0x00001000
+#define AR_ISR_SWI           0x00002000
+#define AR_ISR_RXPHY         0x00004000
+#define AR_ISR_RXKCM         0x00008000
+#define AR_ISR_SWBA          0x00010000
+#define AR_ISR_BRSSI         0x00020000
+#define AR_ISR_BMISS         0x00040000
+#define AR_ISR_BNR           0x00100000
+#define AR_ISR_RXCHIRP       0x00200000
+#define AR_ISR_BCNMISC       0x00800000
+#define AR_ISR_TIM           0x00800000
+#define AR_ISR_QCBROVF       0x02000000
+#define AR_ISR_QCBRURN       0x04000000
+#define AR_ISR_QTRIG         0x08000000
+#define AR_ISR_GENTMR        0x10000000
+
+#define AR_ISR_TXMINTR       0x00080000
+#define AR_ISR_RXMINTR       0x01000000
+#define AR_ISR_TXINTM        0x40000000
+#define AR_ISR_RXINTM        0x80000000
+
+#define AR_ISR_S0               0x0084
+#define AR_ISR_S0_QCU_TXOK      0x000003FF
+#define AR_ISR_S0_QCU_TXOK_S    0
+#define AR_ISR_S0_QCU_TXDESC    0x03FF0000
+#define AR_ISR_S0_QCU_TXDESC_S  16
+
+#define AR_ISR_S1              0x0088
+#define AR_ISR_S1_QCU_TXERR    0x000003FF
+#define AR_ISR_S1_QCU_TXERR_S  0
+#define AR_ISR_S1_QCU_TXEOL    0x03FF0000
+#define AR_ISR_S1_QCU_TXEOL_S  16
+
+#define AR_ISR_S2              0x008c
+#define AR_ISR_S2_QCU_TXURN    0x000003FF
+#define AR_ISR_S2_CST          0x00400000
+#define AR_ISR_S2_GTT          0x00800000
+#define AR_ISR_S2_TIM          0x01000000
+#define AR_ISR_S2_CABEND       0x02000000
+#define AR_ISR_S2_DTIMSYNC     0x04000000
+#define AR_ISR_S2_BCNTO        0x08000000
+#define AR_ISR_S2_CABTO        0x10000000
+#define AR_ISR_S2_DTIM         0x20000000
+#define AR_ISR_S2_TSFOOR       0x40000000
+#define AR_ISR_S2_TBTT_TIME    0x80000000
+
+#define AR_ISR_S3             0x0090
+#define AR_ISR_S3_QCU_QCBROVF    0x000003FF
+#define AR_ISR_S3_QCU_QCBRURN    0x03FF0000
+
+#define AR_ISR_S4              0x0094
+#define AR_ISR_S4_QCU_QTRIG    0x000003FF
+#define AR_ISR_S4_RESV0        0xFFFFFC00
+
+#define AR_ISR_S5                   0x0098
+#define AR_ISR_S5_TIMER_TRIG        0x000000FF
+#define AR_ISR_S5_TIMER_THRESH      0x0007FE00
+#define AR_ISR_S5_TIM_TIMER         0x00000010
+#define AR_ISR_S5_DTIM_TIMER        0x00000020
+#define AR_ISR_S5_S                 0x00d8
+#define AR_IMR_S5                   0x00b8
+#define AR_IMR_S5_TIM_TIMER         0x00000010
+#define AR_IMR_S5_DTIM_TIMER        0x00000020
+
+
+#define AR_IMR               0x00a0
+#define AR_IMR_RXOK          0x00000001
+#define AR_IMR_RXDESC        0x00000002
+#define AR_IMR_RXERR         0x00000004
+#define AR_IMR_RXNOPKT       0x00000008
+#define AR_IMR_RXEOL         0x00000010
+#define AR_IMR_RXORN         0x00000020
+#define AR_IMR_TXOK          0x00000040
+#define AR_IMR_TXDESC        0x00000080
+#define AR_IMR_TXERR         0x00000100
+#define AR_IMR_TXNOPKT       0x00000200
+#define AR_IMR_TXEOL         0x00000400
+#define AR_IMR_TXURN         0x00000800
+#define AR_IMR_MIB           0x00001000
+#define AR_IMR_SWI           0x00002000
+#define AR_IMR_RXPHY         0x00004000
+#define AR_IMR_RXKCM         0x00008000
+#define AR_IMR_SWBA          0x00010000
+#define AR_IMR_BRSSI         0x00020000
+#define AR_IMR_BMISS         0x00040000
+#define AR_IMR_BNR           0x00100000
+#define AR_IMR_RXCHIRP       0x00200000
+#define AR_IMR_BCNMISC       0x00800000
+#define AR_IMR_TIM           0x00800000
+#define AR_IMR_QCBROVF       0x02000000
+#define AR_IMR_QCBRURN       0x04000000
+#define AR_IMR_QTRIG         0x08000000
+#define AR_IMR_GENTMR        0x10000000
+
+#define AR_IMR_TXMINTR       0x00080000
+#define AR_IMR_RXMINTR       0x01000000
+#define AR_IMR_TXINTM        0x40000000
+#define AR_IMR_RXINTM        0x80000000
+
+#define AR_IMR_S0               0x00a4
+#define AR_IMR_S0_QCU_TXOK      0x000003FF
+#define AR_IMR_S0_QCU_TXOK_S    0
+#define AR_IMR_S0_QCU_TXDESC    0x03FF0000
+#define AR_IMR_S0_QCU_TXDESC_S  16
+
+#define AR_IMR_S1              0x00a8
+#define AR_IMR_S1_QCU_TXERR    0x000003FF
+#define AR_IMR_S1_QCU_TXERR_S  0
+#define AR_IMR_S1_QCU_TXEOL    0x03FF0000
+#define AR_IMR_S1_QCU_TXEOL_S  16
+
+#define AR_IMR_S2              0x00ac
+#define AR_IMR_S2_QCU_TXURN    0x000003FF
+#define AR_IMR_S2_QCU_TXURN_S  0
+#define AR_IMR_S2_CST          0x00400000
+#define AR_IMR_S2_GTT          0x00800000
+#define AR_IMR_S2_TIM          0x01000000
+#define AR_IMR_S2_CABEND       0x02000000
+#define AR_IMR_S2_DTIMSYNC     0x04000000
+#define AR_IMR_S2_BCNTO        0x08000000
+#define AR_IMR_S2_CABTO        0x10000000
+#define AR_IMR_S2_DTIM         0x20000000
+#define AR_IMR_S2_TSFOOR       0x40000000
+
+#define AR_IMR_S3                0x00b0
+#define AR_IMR_S3_QCU_QCBROVF    0x000003FF
+#define AR_IMR_S3_QCU_QCBRURN    0x03FF0000
+#define AR_IMR_S3_QCU_QCBRURN_S  16
+
+#define AR_IMR_S4              0x00b4
+#define AR_IMR_S4_QCU_QTRIG    0x000003FF
+#define AR_IMR_S4_RESV0        0xFFFFFC00
+
+#define AR_IMR_S5              0x00b8
+#define AR_IMR_S5_TIMER_TRIG        0x000000FF
+#define AR_IMR_S5_TIMER_THRESH      0x0000FF00
+
+
+#define AR_ISR_RAC            0x00c0
+#define AR_ISR_S0_S           0x00c4
+#define AR_ISR_S0_QCU_TXOK      0x000003FF
+#define AR_ISR_S0_QCU_TXOK_S    0
+#define AR_ISR_S0_QCU_TXDESC    0x03FF0000
+#define AR_ISR_S0_QCU_TXDESC_S  16
+
+#define AR_ISR_S1_S           0x00c8
+#define AR_ISR_S1_QCU_TXERR    0x000003FF
+#define AR_ISR_S1_QCU_TXERR_S  0
+#define AR_ISR_S1_QCU_TXEOL    0x03FF0000
+#define AR_ISR_S1_QCU_TXEOL_S  16
+
+#define AR_ISR_S2_S           0x00cc
+#define AR_ISR_S3_S           0x00d0
+#define AR_ISR_S4_S           0x00d4
+#define AR_ISR_S5_S           0x00d8
+#define AR_DMADBG_0           0x00e0
+#define AR_DMADBG_1           0x00e4
+#define AR_DMADBG_2           0x00e8
+#define AR_DMADBG_3           0x00ec
+#define AR_DMADBG_4           0x00f0
+#define AR_DMADBG_5           0x00f4
+#define AR_DMADBG_6           0x00f8
+#define AR_DMADBG_7           0x00fc
+
+#define AR_NUM_QCU      10
+#define AR_QCU_0        0x0001
+#define AR_QCU_1        0x0002
+#define AR_QCU_2        0x0004
+#define AR_QCU_3        0x0008
+#define AR_QCU_4        0x0010
+#define AR_QCU_5        0x0020
+#define AR_QCU_6        0x0040
+#define AR_QCU_7        0x0080
+#define AR_QCU_8        0x0100
+#define AR_QCU_9        0x0200
+
+#define AR_Q0_TXDP           0x0800
+#define AR_Q1_TXDP           0x0804
+#define AR_Q2_TXDP           0x0808
+#define AR_Q3_TXDP           0x080c
+#define AR_Q4_TXDP           0x0810
+#define AR_Q5_TXDP           0x0814
+#define AR_Q6_TXDP           0x0818
+#define AR_Q7_TXDP           0x081c
+#define AR_Q8_TXDP           0x0820
+#define AR_Q9_TXDP           0x0824
+#define AR_QTXDP(_i)    (AR_Q0_TXDP + ((_i)<<2))
+
+#define AR_Q_TXE             0x0840
+#define AR_Q_TXE_M           0x000003FF
+
+#define AR_Q_TXD             0x0880
+#define AR_Q_TXD_M           0x000003FF
+
+#define AR_Q0_CBRCFG         0x08c0
+#define AR_Q1_CBRCFG         0x08c4
+#define AR_Q2_CBRCFG         0x08c8
+#define AR_Q3_CBRCFG         0x08cc
+#define AR_Q4_CBRCFG         0x08d0
+#define AR_Q5_CBRCFG         0x08d4
+#define AR_Q6_CBRCFG         0x08d8
+#define AR_Q7_CBRCFG         0x08dc
+#define AR_Q8_CBRCFG         0x08e0
+#define AR_Q9_CBRCFG         0x08e4
+#define AR_QCBRCFG(_i)      (AR_Q0_CBRCFG + ((_i)<<2))
+#define AR_Q_CBRCFG_INTERVAL     0x00FFFFFF
+#define AR_Q_CBRCFG_INTERVAL_S   0
+#define AR_Q_CBRCFG_OVF_THRESH   0xFF000000
+#define AR_Q_CBRCFG_OVF_THRESH_S 24
+
+#define AR_Q0_RDYTIMECFG         0x0900
+#define AR_Q1_RDYTIMECFG         0x0904
+#define AR_Q2_RDYTIMECFG         0x0908
+#define AR_Q3_RDYTIMECFG         0x090c
+#define AR_Q4_RDYTIMECFG         0x0910
+#define AR_Q5_RDYTIMECFG         0x0914
+#define AR_Q6_RDYTIMECFG         0x0918
+#define AR_Q7_RDYTIMECFG         0x091c
+#define AR_Q8_RDYTIMECFG         0x0920
+#define AR_Q9_RDYTIMECFG         0x0924
+#define AR_QRDYTIMECFG(_i)       (AR_Q0_RDYTIMECFG + ((_i)<<2))
+#define AR_Q_RDYTIMECFG_DURATION   0x00FFFFFF
+#define AR_Q_RDYTIMECFG_DURATION_S 0
+#define AR_Q_RDYTIMECFG_EN         0x01000000
+
+#define AR_Q_ONESHOTARM_SC       0x0940
+#define AR_Q_ONESHOTARM_SC_M     0x000003FF
+#define AR_Q_ONESHOTARM_SC_RESV0 0xFFFFFC00
+
+#define AR_Q_ONESHOTARM_CC       0x0980
+#define AR_Q_ONESHOTARM_CC_M     0x000003FF
+#define AR_Q_ONESHOTARM_CC_RESV0 0xFFFFFC00
+
+#define AR_Q0_MISC         0x09c0
+#define AR_Q1_MISC         0x09c4
+#define AR_Q2_MISC         0x09c8
+#define AR_Q3_MISC         0x09cc
+#define AR_Q4_MISC         0x09d0
+#define AR_Q5_MISC         0x09d4
+#define AR_Q6_MISC         0x09d8
+#define AR_Q7_MISC         0x09dc
+#define AR_Q8_MISC         0x09e0
+#define AR_Q9_MISC         0x09e4
+#define AR_QMISC(_i)       (AR_Q0_MISC + ((_i)<<2))
+#define AR_Q_MISC_FSP                     0x0000000F
+#define AR_Q_MISC_FSP_ASAP                0
+#define AR_Q_MISC_FSP_CBR                 1
+#define AR_Q_MISC_FSP_DBA_GATED           2
+#define AR_Q_MISC_FSP_TIM_GATED           3
+#define AR_Q_MISC_FSP_BEACON_SENT_GATED   4
+#define AR_Q_MISC_FSP_BEACON_RCVD_GATED   5
+#define AR_Q_MISC_ONE_SHOT_EN             0x00000010
+#define AR_Q_MISC_CBR_INCR_DIS1           0x00000020
+#define AR_Q_MISC_CBR_INCR_DIS0           0x00000040
+#define AR_Q_MISC_BEACON_USE              0x00000080
+#define AR_Q_MISC_CBR_EXP_CNTR_LIMIT_EN   0x00000100
+#define AR_Q_MISC_RDYTIME_EXP_POLICY      0x00000200
+#define AR_Q_MISC_RESET_CBR_EXP_CTR       0x00000400
+#define AR_Q_MISC_DCU_EARLY_TERM_REQ      0x00000800
+#define AR_Q_MISC_RESV0                   0xFFFFF000
+
+#define AR_Q0_STS         0x0a00
+#define AR_Q1_STS         0x0a04
+#define AR_Q2_STS         0x0a08
+#define AR_Q3_STS         0x0a0c
+#define AR_Q4_STS         0x0a10
+#define AR_Q5_STS         0x0a14
+#define AR_Q6_STS         0x0a18
+#define AR_Q7_STS         0x0a1c
+#define AR_Q8_STS         0x0a20
+#define AR_Q9_STS         0x0a24
+#define AR_QSTS(_i)       (AR_Q0_STS + ((_i)<<2))
+#define AR_Q_STS_PEND_FR_CNT          0x00000003
+#define AR_Q_STS_RESV0                0x000000FC
+#define AR_Q_STS_CBR_EXP_CNT          0x0000FF00
+#define AR_Q_STS_RESV1                0xFFFF0000
+
+#define AR_Q_RDYTIMESHDN    0x0a40
+#define AR_Q_RDYTIMESHDN_M  0x000003FF
+
+
+#define AR_NUM_DCU      10
+#define AR_DCU_0        0x0001
+#define AR_DCU_1        0x0002
+#define AR_DCU_2        0x0004
+#define AR_DCU_3        0x0008
+#define AR_DCU_4        0x0010
+#define AR_DCU_5        0x0020
+#define AR_DCU_6        0x0040
+#define AR_DCU_7        0x0080
+#define AR_DCU_8        0x0100
+#define AR_DCU_9        0x0200
+
+#define AR_D0_QCUMASK     0x1000
+#define AR_D1_QCUMASK     0x1004
+#define AR_D2_QCUMASK     0x1008
+#define AR_D3_QCUMASK     0x100c
+#define AR_D4_QCUMASK     0x1010
+#define AR_D5_QCUMASK     0x1014
+#define AR_D6_QCUMASK     0x1018
+#define AR_D7_QCUMASK     0x101c
+#define AR_D8_QCUMASK     0x1020
+#define AR_D9_QCUMASK     0x1024
+#define AR_DQCUMASK(_i)   (AR_D0_QCUMASK + ((_i)<<2))
+#define AR_D_QCUMASK         0x000003FF
+#define AR_D_QCUMASK_RESV0   0xFFFFFC00
+
+#define AR_D_TXBLK_CMD  0x1038
+#define AR_D_TXBLK_DATA(i) (AR_D_TXBLK_CMD+(i))
+
+#define AR_D0_LCL_IFS     0x1040
+#define AR_D1_LCL_IFS     0x1044
+#define AR_D2_LCL_IFS     0x1048
+#define AR_D3_LCL_IFS     0x104c
+#define AR_D4_LCL_IFS     0x1050
+#define AR_D5_LCL_IFS     0x1054
+#define AR_D6_LCL_IFS     0x1058
+#define AR_D7_LCL_IFS     0x105c
+#define AR_D8_LCL_IFS     0x1060
+#define AR_D9_LCL_IFS     0x1064
+#define AR_DLCL_IFS(_i)   (AR_D0_LCL_IFS + ((_i)<<2))
+#define AR_D_LCL_IFS_CWMIN       0x000003FF
+#define AR_D_LCL_IFS_CWMIN_S     0
+#define AR_D_LCL_IFS_CWMAX       0x000FFC00
+#define AR_D_LCL_IFS_CWMAX_S     10
+#define AR_D_LCL_IFS_AIFS        0x0FF00000
+#define AR_D_LCL_IFS_AIFS_S      20
+
+#define AR_D_LCL_IFS_RESV0    0xF0000000
+
+#define AR_D0_RETRY_LIMIT     0x1080
+#define AR_D1_RETRY_LIMIT     0x1084
+#define AR_D2_RETRY_LIMIT     0x1088
+#define AR_D3_RETRY_LIMIT     0x108c
+#define AR_D4_RETRY_LIMIT     0x1090
+#define AR_D5_RETRY_LIMIT     0x1094
+#define AR_D6_RETRY_LIMIT     0x1098
+#define AR_D7_RETRY_LIMIT     0x109c
+#define AR_D8_RETRY_LIMIT     0x10a0
+#define AR_D9_RETRY_LIMIT     0x10a4
+#define AR_DRETRY_LIMIT(_i)   (AR_D0_RETRY_LIMIT + ((_i)<<2))
+#define AR_D_RETRY_LIMIT_FR_SH       0x0000000F
+#define AR_D_RETRY_LIMIT_FR_SH_S     0
+#define AR_D_RETRY_LIMIT_STA_SH      0x00003F00
+#define AR_D_RETRY_LIMIT_STA_SH_S    8
+#define AR_D_RETRY_LIMIT_STA_LG      0x000FC000
+#define AR_D_RETRY_LIMIT_STA_LG_S    14
+#define AR_D_RETRY_LIMIT_RESV0       0xFFF00000
+
+#define AR_D0_CHNTIME     0x10c0
+#define AR_D1_CHNTIME     0x10c4
+#define AR_D2_CHNTIME     0x10c8
+#define AR_D3_CHNTIME     0x10cc
+#define AR_D4_CHNTIME     0x10d0
+#define AR_D5_CHNTIME     0x10d4
+#define AR_D6_CHNTIME     0x10d8
+#define AR_D7_CHNTIME     0x10dc
+#define AR_D8_CHNTIME     0x10e0
+#define AR_D9_CHNTIME     0x10e4
+#define AR_DCHNTIME(_i)   (AR_D0_CHNTIME + ((_i)<<2))
+#define AR_D_CHNTIME_DUR         0x000FFFFF
+#define AR_D_CHNTIME_DUR_S       0
+#define AR_D_CHNTIME_EN          0x00100000
+#define AR_D_CHNTIME_RESV0       0xFFE00000
+
+#define AR_D0_MISC        0x1100
+#define AR_D1_MISC        0x1104
+#define AR_D2_MISC        0x1108
+#define AR_D3_MISC        0x110c
+#define AR_D4_MISC        0x1110
+#define AR_D5_MISC        0x1114
+#define AR_D6_MISC        0x1118
+#define AR_D7_MISC        0x111c
+#define AR_D8_MISC        0x1120
+#define AR_D9_MISC        0x1124
+#define AR_DMISC(_i)      (AR_D0_MISC + ((_i)<<2))
+#define AR_D_MISC_BKOFF_THRESH        0x0000003F
+#define AR_D_MISC_RETRY_CNT_RESET_EN  0x00000040
+#define AR_D_MISC_CW_RESET_EN         0x00000080
+#define AR_D_MISC_FRAG_WAIT_EN        0x00000100
+#define AR_D_MISC_FRAG_BKOFF_EN       0x00000200
+#define AR_D_MISC_CW_BKOFF_EN         0x00001000
+#define AR_D_MISC_VIR_COL_HANDLING    0x0000C000
+#define AR_D_MISC_VIR_COL_HANDLING_S  14
+#define AR_D_MISC_VIR_COL_HANDLING_DEFAULT 0
+#define AR_D_MISC_VIR_COL_HANDLING_IGNORE  1
+#define AR_D_MISC_BEACON_USE          0x00010000
+#define AR_D_MISC_ARB_LOCKOUT_CNTRL   0x00060000
+#define AR_D_MISC_ARB_LOCKOUT_CNTRL_S 17
+#define AR_D_MISC_ARB_LOCKOUT_CNTRL_NONE     0
+#define AR_D_MISC_ARB_LOCKOUT_CNTRL_INTRA_FR 1
+#define AR_D_MISC_ARB_LOCKOUT_CNTRL_GLOBAL   2
+#define AR_D_MISC_ARB_LOCKOUT_IGNORE  0x00080000
+#define AR_D_MISC_SEQ_NUM_INCR_DIS    0x00100000
+#define AR_D_MISC_POST_FR_BKOFF_DIS   0x00200000
+#define AR_D_MISC_VIT_COL_CW_BKOFF_EN 0x00400000
+#define AR_D_MISC_BLOWN_IFS_RETRY_EN  0x00800000
+#define AR_D_MISC_RESV0               0xFF000000
+
+#define AR_D_SEQNUM      0x1140
+
+#define AR_D_GBL_IFS_SIFS         0x1030
+#define AR_D_GBL_IFS_SIFS_M       0x0000FFFF
+#define AR_D_GBL_IFS_SIFS_RESV0   0xFFFFFFFF
+
+#define AR_D_TXBLK_BASE            0x1038
+#define AR_D_TXBLK_WRITE_BITMASK    0x0000FFFF
+#define AR_D_TXBLK_WRITE_BITMASK_S  0
+#define AR_D_TXBLK_WRITE_SLICE      0x000F0000
+#define AR_D_TXBLK_WRITE_SLICE_S    16
+#define AR_D_TXBLK_WRITE_DCU        0x00F00000
+#define AR_D_TXBLK_WRITE_DCU_S      20
+#define AR_D_TXBLK_WRITE_COMMAND    0x0F000000
+#define AR_D_TXBLK_WRITE_COMMAND_S      24
+
+#define AR_D_GBL_IFS_SLOT         0x1070
+#define AR_D_GBL_IFS_SLOT_M       0x0000FFFF
+#define AR_D_GBL_IFS_SLOT_RESV0   0xFFFF0000
+
+#define AR_D_GBL_IFS_EIFS         0x10b0
+#define AR_D_GBL_IFS_EIFS_M       0x0000FFFF
+#define AR_D_GBL_IFS_EIFS_RESV0   0xFFFF0000
+
+#define AR_D_GBL_IFS_MISC        0x10f0
+#define AR_D_GBL_IFS_MISC_LFSR_SLICE_SEL        0x00000007
+#define AR_D_GBL_IFS_MISC_TURBO_MODE            0x00000008
+#define AR_D_GBL_IFS_MISC_USEC_DURATION         0x000FFC00
+#define AR_D_GBL_IFS_MISC_DCU_ARBITER_DLY       0x00300000
+#define AR_D_GBL_IFS_MISC_RANDOM_LFSR_SLICE_DIS 0x01000000
+#define AR_D_GBL_IFS_MISC_SLOT_XMIT_WIND_LEN    0x06000000
+#define AR_D_GBL_IFS_MISC_FORCE_XMIT_SLOT_BOUND 0x08000000
+#define AR_D_GBL_IFS_MISC_IGNORE_BACKOFF        0x10000000
+
+#define AR_D_FPCTL                  0x1230
+#define AR_D_FPCTL_DCU              0x0000000F
+#define AR_D_FPCTL_DCU_S            0
+#define AR_D_FPCTL_PREFETCH_EN      0x00000010
+#define AR_D_FPCTL_BURST_PREFETCH   0x00007FE0
+#define AR_D_FPCTL_BURST_PREFETCH_S 5
+
+#define AR_D_TXPSE                 0x1270
+#define AR_D_TXPSE_CTRL            0x000003FF
+#define AR_D_TXPSE_RESV0           0x0000FC00
+#define AR_D_TXPSE_STATUS          0x00010000
+#define AR_D_TXPSE_RESV1           0xFFFE0000
+
+#define AR_D_TXSLOTMASK            0x12f0
+#define AR_D_TXSLOTMASK_NUM        0x0000000F
+
+#define AR_CFG_LED                     0x1f04
+#define AR_CFG_SCLK_RATE_IND           0x00000003
+#define AR_CFG_SCLK_RATE_IND_S         0
+#define AR_CFG_SCLK_32MHZ              0x00000000
+#define AR_CFG_SCLK_4MHZ               0x00000001
+#define AR_CFG_SCLK_1MHZ               0x00000002
+#define AR_CFG_SCLK_32KHZ              0x00000003
+#define AR_CFG_LED_BLINK_SLOW          0x00000008
+#define AR_CFG_LED_BLINK_THRESH_SEL    0x00000070
+#define AR_CFG_LED_MODE_SEL            0x00000380
+#define AR_CFG_LED_MODE_SEL_S          7
+#define AR_CFG_LED_POWER               0x00000280
+#define AR_CFG_LED_POWER_S             7
+#define AR_CFG_LED_NETWORK             0x00000300
+#define AR_CFG_LED_NETWORK_S           7
+#define AR_CFG_LED_MODE_PROP           0x0
+#define AR_CFG_LED_MODE_RPROP          0x1
+#define AR_CFG_LED_MODE_SPLIT          0x2
+#define AR_CFG_LED_MODE_RAND           0x3
+#define AR_CFG_LED_MODE_POWER_OFF      0x4
+#define AR_CFG_LED_MODE_POWER_ON       0x5
+#define AR_CFG_LED_MODE_NETWORK_OFF    0x4
+#define AR_CFG_LED_MODE_NETWORK_ON     0x6
+#define AR_CFG_LED_ASSOC_CTL           0x00000c00
+#define AR_CFG_LED_ASSOC_CTL_S         10
+#define AR_CFG_LED_ASSOC_NONE          0x0
+#define AR_CFG_LED_ASSOC_ACTIVE        0x1
+#define AR_CFG_LED_ASSOC_PENDING       0x2
+
+#define AR_CFG_LED_BLINK_SLOW          0x00000008
+#define AR_CFG_LED_BLINK_SLOW_S        3
+
+#define AR_CFG_LED_BLINK_THRESH_SEL    0x00000070
+#define AR_CFG_LED_BLINK_THRESH_SEL_S  4
+
+#define AR_MAC_SLEEP                0x1f00
+#define AR_MAC_SLEEP_MAC_AWAKE      0x00000000
+#define AR_MAC_SLEEP_MAC_ASLEEP     0x00000001
+
+#define AR_RC                0x4000
+#define AR_RC_AHB            0x00000001
+#define AR_RC_APB            0x00000002
+#define AR_RC_HOSTIF         0x00000100
+
+#define AR_WA                0x4004
+
+#define AR_PM_STATE                 0x4008
+#define AR_PM_STATE_PME_D3COLD_VAUX 0x00100000
+
+#define AR_HOST_TIMEOUT             0x4018
+#define AR_HOST_TIMEOUT_APB_CNTR    0x0000FFFF
+#define AR_HOST_TIMEOUT_APB_CNTR_S  0
+#define AR_HOST_TIMEOUT_LCL_CNTR    0xFFFF0000
+#define AR_HOST_TIMEOUT_LCL_CNTR_S  16
+
+#define AR_EEPROM                0x401c
+#define AR_EEPROM_ABSENT         0x00000100
+#define AR_EEPROM_CORRUPT        0x00000200
+#define AR_EEPROM_PROT_MASK      0x03FFFC00
+#define AR_EEPROM_PROT_MASK_S    10
+
+#define EEPROM_PROTECT_RP_0_31        0x0001
+#define EEPROM_PROTECT_WP_0_31        0x0002
+#define EEPROM_PROTECT_RP_32_63       0x0004
+#define EEPROM_PROTECT_WP_32_63       0x0008
+#define EEPROM_PROTECT_RP_64_127      0x0010
+#define EEPROM_PROTECT_WP_64_127      0x0020
+#define EEPROM_PROTECT_RP_128_191     0x0040
+#define EEPROM_PROTECT_WP_128_191     0x0080
+#define EEPROM_PROTECT_RP_192_255     0x0100
+#define EEPROM_PROTECT_WP_192_255     0x0200
+#define EEPROM_PROTECT_RP_256_511     0x0400
+#define EEPROM_PROTECT_WP_256_511     0x0800
+#define EEPROM_PROTECT_RP_512_1023    0x1000
+#define EEPROM_PROTECT_WP_512_1023    0x2000
+#define EEPROM_PROTECT_RP_1024_2047   0x4000
+#define EEPROM_PROTECT_WP_1024_2047   0x8000
+
+#define AR_SREV \
+	((AR_SREV_9100(ah)) ? 0x0600 : 0x4020)
+
+#define AR_SREV_ID \
+	((AR_SREV_9100(ah)) ? 0x00000FFF : 0x000000FF)
+#define AR_SREV_VERSION                       0x000000F0
+#define AR_SREV_VERSION_S                     4
+#define AR_SREV_REVISION                      0x00000007
+
+#define AR_SREV_ID2                           0xFFFFFFFF
+#define AR_SREV_VERSION2        	      0xFFFC0000
+#define AR_SREV_VERSION2_S                    18
+#define AR_SREV_TYPE2        	      	      0x0003F000
+#define AR_SREV_TYPE2_S                       12
+#define AR_SREV_TYPE2_CHAIN		      0x00001000
+#define AR_SREV_TYPE2_HOST_MODE		      0x00002000
+#define AR_SREV_REVISION2        	      0x00000F00
+#define AR_SREV_REVISION2_S     	      8
+
+#define AR_SREV_VERSION_5416_PCI               0xD
+#define AR_SREV_VERSION_5416_PCIE              0xC
+#define AR_SREV_REVISION_5416_10               0
+#define AR_SREV_REVISION_5416_20               1
+#define AR_SREV_REVISION_5416_22               2
+#define AR_SREV_VERSION_9160        	      0x40
+#define AR_SREV_REVISION_9160_10    	      0
+#define AR_SREV_REVISION_9160_11    	      1
+#define AR_SREV_VERSION_9280                0x80
+#define AR_SREV_REVISION_9280_10            0
+#define AR_SREV_REVISION_9280_20            1
+#define AR_SREV_REVISION_9280_21            2
+#define AR_SREV_VERSION_9285                  0xC0
+#define AR_SREV_REVISION_9285_10              0
+
+#define AR_SREV_9100_OR_LATER(_ah) \
+	(((_ah)->ah_macVersion >= AR_SREV_VERSION_5416_PCIE))
+#define AR_SREV_5416_20_OR_LATER(_ah) \
+	(((_ah)->ah_macVersion >= AR_SREV_VERSION_9160) || \
+		((_ah)->ah_macRev >= AR_SREV_REVISION_5416_20))
+#define AR_SREV_5416_22_OR_LATER(_ah) \
+	(((_ah)->ah_macVersion >= AR_SREV_VERSION_9160) || \
+		((_ah)->ah_macRev >= AR_SREV_REVISION_5416_22))
+#define AR_SREV_9160(_ah) \
+	(((_ah)->ah_macVersion == AR_SREV_VERSION_9160))
+#define AR_SREV_9160_10_OR_LATER(_ah) \
+	(((_ah)->ah_macVersion >= AR_SREV_VERSION_9160))
+#define AR_SREV_9160_11(_ah) \
+	(AR_SREV_9160(_ah) && ((_ah)->ah_macRev == AR_SREV_REVISION_9160_11))
+#define AR_SREV_9280(_ah) \
+	(((_ah)->ah_macVersion == AR_SREV_VERSION_9280))
+#define AR_SREV_9280_10_OR_LATER(_ah) \
+	(((_ah)->ah_macVersion >= AR_SREV_VERSION_9280))
+#define AR_SREV_9280_20(_ah) \
+	(((_ah)->ah_macVersion == AR_SREV_VERSION_9280) && \
+		((_ah)->ah_macRev >= AR_SREV_REVISION_9280_20))
+#define AR_SREV_9280_20_OR_LATER(_ah) \
+	(((_ah)->ah_macVersion > AR_SREV_VERSION_9280) || \
+	(((_ah)->ah_macVersion == AR_SREV_VERSION_9280) && \
+	((_ah)->ah_macRev >= AR_SREV_REVISION_9280_20)))
+
+#define AR_SREV_9285(_ah) (((_ah)->ah_macVersion == AR_SREV_VERSION_9285))
+#define AR_SREV_9285_10_OR_LATER(_ah) \
+	(((_ah)->ah_macVersion >= AR_SREV_VERSION_9285))
+
+#define AR_RADIO_SREV_MAJOR                   0xf0
+#define AR_RAD5133_SREV_MAJOR                 0xc0
+#define AR_RAD2133_SREV_MAJOR                 0xd0
+#define AR_RAD5122_SREV_MAJOR                 0xe0
+#define AR_RAD2122_SREV_MAJOR                 0xf0
+
+#define AR_AHB_MODE                           0x4024
+#define AR_AHB_EXACT_WR_EN                    0x00000000
+#define AR_AHB_BUF_WR_EN                      0x00000001
+#define AR_AHB_EXACT_RD_EN                    0x00000000
+#define AR_AHB_CACHELINE_RD_EN                0x00000002
+#define AR_AHB_PREFETCH_RD_EN                 0x00000004
+#define AR_AHB_PAGE_SIZE_1K                   0x00000000
+#define AR_AHB_PAGE_SIZE_2K                   0x00000008
+#define AR_AHB_PAGE_SIZE_4K                   0x00000010
+
+#define AR_INTR_RTC_IRQ                       0x00000001
+#define AR_INTR_MAC_IRQ                       0x00000002
+#define AR_INTR_EEP_PROT_ACCESS               0x00000004
+#define AR_INTR_MAC_AWAKE                     0x00020000
+#define AR_INTR_MAC_ASLEEP                    0x00040000
+#define AR_INTR_SPURIOUS                      0xFFFFFFFF
+
+
+#define AR_INTR_SYNC_CAUSE_CLR                0x4028
+
+#define AR_INTR_SYNC_CAUSE                    0x4028
+
+#define AR_INTR_SYNC_ENABLE                   0x402c
+#define AR_INTR_SYNC_ENABLE_GPIO              0xFFFC0000
+#define AR_INTR_SYNC_ENABLE_GPIO_S            18
+
+enum {
+	AR_INTR_SYNC_RTC_IRQ = 0x00000001,
+	AR_INTR_SYNC_MAC_IRQ = 0x00000002,
+	AR_INTR_SYNC_EEPROM_ILLEGAL_ACCESS = 0x00000004,
+	AR_INTR_SYNC_APB_TIMEOUT = 0x00000008,
+	AR_INTR_SYNC_PCI_MODE_CONFLICT = 0x00000010,
+	AR_INTR_SYNC_HOST1_FATAL = 0x00000020,
+	AR_INTR_SYNC_HOST1_PERR = 0x00000040,
+	AR_INTR_SYNC_TRCV_FIFO_PERR = 0x00000080,
+	AR_INTR_SYNC_RADM_CPL_EP = 0x00000100,
+	AR_INTR_SYNC_RADM_CPL_DLLP_ABORT = 0x00000200,
+	AR_INTR_SYNC_RADM_CPL_TLP_ABORT = 0x00000400,
+	AR_INTR_SYNC_RADM_CPL_ECRC_ERR = 0x00000800,
+	AR_INTR_SYNC_RADM_CPL_TIMEOUT = 0x00001000,
+	AR_INTR_SYNC_LOCAL_TIMEOUT = 0x00002000,
+	AR_INTR_SYNC_PM_ACCESS = 0x00004000,
+	AR_INTR_SYNC_MAC_AWAKE = 0x00008000,
+	AR_INTR_SYNC_MAC_ASLEEP = 0x00010000,
+	AR_INTR_SYNC_MAC_SLEEP_ACCESS = 0x00020000,
+	AR_INTR_SYNC_ALL = 0x0003FFFF,
+
+
+	AR_INTR_SYNC_DEFAULT = (AR_INTR_SYNC_HOST1_FATAL |
+				AR_INTR_SYNC_HOST1_PERR |
+				AR_INTR_SYNC_RADM_CPL_EP |
+				AR_INTR_SYNC_RADM_CPL_DLLP_ABORT |
+				AR_INTR_SYNC_RADM_CPL_TLP_ABORT |
+				AR_INTR_SYNC_RADM_CPL_ECRC_ERR |
+				AR_INTR_SYNC_RADM_CPL_TIMEOUT |
+				AR_INTR_SYNC_LOCAL_TIMEOUT |
+				AR_INTR_SYNC_MAC_SLEEP_ACCESS),
+
+	AR_INTR_SYNC_SPURIOUS = 0xFFFFFFFF,
+
+};
+
+#define AR_INTR_ASYNC_MASK                       0x4030
+#define AR_INTR_ASYNC_MASK_GPIO                  0xFFFC0000
+#define AR_INTR_ASYNC_MASK_GPIO_S                18
+
+#define AR_INTR_SYNC_MASK                        0x4034
+#define AR_INTR_SYNC_MASK_GPIO                   0xFFFC0000
+#define AR_INTR_SYNC_MASK_GPIO_S                 18
+
+#define AR_INTR_ASYNC_CAUSE_CLR                  0x4038
+#define AR_INTR_ASYNC_CAUSE                      0x4038
+
+#define AR_INTR_ASYNC_ENABLE                     0x403c
+#define AR_INTR_ASYNC_ENABLE_GPIO                0xFFFC0000
+#define AR_INTR_ASYNC_ENABLE_GPIO_S              18
+
+#define AR_PCIE_SERDES                           0x4040
+#define AR_PCIE_SERDES2                          0x4044
+#define AR_PCIE_PM_CTRL                          0x4014
+#define AR_PCIE_PM_CTRL_ENA                      0x00080000
+
+#define AR_NUM_GPIO                              14
+#define AR928X_NUM_GPIO                          10
+
+#define AR_GPIO_IN_OUT                           0x4048
+#define AR_GPIO_IN_VAL                           0x0FFFC000
+#define AR_GPIO_IN_VAL_S                         14
+#define AR928X_GPIO_IN_VAL                       0x000FFC00
+#define AR928X_GPIO_IN_VAL_S                     10
+
+#define AR_GPIO_OE_OUT                           0x404c
+#define AR_GPIO_OE_OUT_DRV                       0x3
+#define AR_GPIO_OE_OUT_DRV_NO                    0x0
+#define AR_GPIO_OE_OUT_DRV_LOW                   0x1
+#define AR_GPIO_OE_OUT_DRV_HI                    0x2
+#define AR_GPIO_OE_OUT_DRV_ALL                   0x3
+
+#define AR_GPIO_INTR_POL                         0x4050
+#define AR_GPIO_INTR_POL_VAL                     0x00001FFF
+#define AR_GPIO_INTR_POL_VAL_S                   0
+
+#define AR_GPIO_INPUT_EN_VAL                     0x4054
+#define AR_GPIO_INPUT_EN_VAL_RFSILENT_DEF        0x00000080
+#define AR_GPIO_INPUT_EN_VAL_RFSILENT_DEF_S      7
+#define AR_GPIO_INPUT_EN_VAL_RFSILENT_BB         0x00008000
+#define AR_GPIO_INPUT_EN_VAL_RFSILENT_BB_S       15
+#define AR_GPIO_RTC_RESET_OVERRIDE_ENABLE        0x00010000
+#define AR_GPIO_JTAG_DISABLE                     0x00020000
+
+#define AR_GPIO_INPUT_MUX1                       0x4058
+
+#define AR_GPIO_INPUT_MUX2                       0x405c
+#define AR_GPIO_INPUT_MUX2_CLK25                 0x0000000f
+#define AR_GPIO_INPUT_MUX2_CLK25_S               0
+#define AR_GPIO_INPUT_MUX2_RFSILENT              0x000000f0
+#define AR_GPIO_INPUT_MUX2_RFSILENT_S            4
+#define AR_GPIO_INPUT_MUX2_RTC_RESET             0x00000f00
+#define AR_GPIO_INPUT_MUX2_RTC_RESET_S           8
+
+#define AR_GPIO_OUTPUT_MUX1                      0x4060
+#define AR_GPIO_OUTPUT_MUX2                      0x4064
+#define AR_GPIO_OUTPUT_MUX3                      0x4068
+
+#define AR_GPIO_OUTPUT_MUX_AS_OUTPUT             0
+#define AR_GPIO_OUTPUT_MUX_AS_PCIE_ATTENTION_LED 1
+#define AR_GPIO_OUTPUT_MUX_AS_PCIE_POWER_LED     2
+#define AR_GPIO_OUTPUT_MUX_AS_MAC_NETWORK_LED    5
+#define AR_GPIO_OUTPUT_MUX_AS_MAC_POWER_LED      6
+
+#define AR_INPUT_STATE                           0x406c
+
+#define AR_EEPROM_STATUS_DATA                    0x407c
+#define AR_EEPROM_STATUS_DATA_VAL                0x0000ffff
+#define AR_EEPROM_STATUS_DATA_VAL_S              0
+#define AR_EEPROM_STATUS_DATA_BUSY               0x00010000
+#define AR_EEPROM_STATUS_DATA_BUSY_ACCESS        0x00020000
+#define AR_EEPROM_STATUS_DATA_PROT_ACCESS        0x00040000
+#define AR_EEPROM_STATUS_DATA_ABSENT_ACCESS      0x00080000
+
+#define AR_OBS                  0x4080
+
+#define AR_PCIE_MSI                              0x4094
+#define AR_PCIE_MSI_ENABLE                       0x00000001
+
+
+#define AR_RTC_9160_PLL_DIV	0x000003ff
+#define AR_RTC_9160_PLL_DIV_S   0
+#define AR_RTC_9160_PLL_REFDIV  0x00003C00
+#define AR_RTC_9160_PLL_REFDIV_S 10
+#define AR_RTC_9160_PLL_CLKSEL	0x0000C000
+#define AR_RTC_9160_PLL_CLKSEL_S 14
+
+#define AR_RTC_BASE             0x00020000
+#define AR_RTC_RC \
+	(AR_SREV_9100(ah)) ? (AR_RTC_BASE + 0x0000) : 0x7000
+#define AR_RTC_RC_M		0x00000003
+#define AR_RTC_RC_MAC_WARM      0x00000001
+#define AR_RTC_RC_MAC_COLD      0x00000002
+#define AR_RTC_RC_COLD_RESET    0x00000004
+#define AR_RTC_RC_WARM_RESET    0x00000008
+
+#define AR_RTC_PLL_CONTROL \
+	(AR_SREV_9100(ah)) ? (AR_RTC_BASE + 0x0014) : 0x7014
+
+#define AR_RTC_PLL_DIV          0x0000001f
+#define AR_RTC_PLL_DIV_S        0
+#define AR_RTC_PLL_DIV2         0x00000020
+#define AR_RTC_PLL_REFDIV_5     0x000000c0
+#define AR_RTC_PLL_CLKSEL       0x00000300
+#define AR_RTC_PLL_CLKSEL_S     8
+
+
+
+#define AR_RTC_RESET \
+	((AR_SREV_9100(ah)) ? (AR_RTC_BASE + 0x0040) : 0x7040)
+#define AR_RTC_RESET_EN		(0x00000001)
+
+#define AR_RTC_STATUS \
+	((AR_SREV_9100(ah)) ? (AR_RTC_BASE + 0x0044) : 0x7044)
+
+#define AR_RTC_STATUS_M \
+	((AR_SREV_9100(ah)) ? 0x0000003f : 0x0000000f)
+
+#define AR_RTC_PM_STATUS_M      0x0000000f
+
+#define AR_RTC_STATUS_SHUTDOWN  0x00000001
+#define AR_RTC_STATUS_ON        0x00000002
+#define AR_RTC_STATUS_SLEEP     0x00000004
+#define AR_RTC_STATUS_WAKEUP    0x00000008
+
+#define AR_RTC_SLEEP_CLK \
+	((AR_SREV_9100(ah)) ? (AR_RTC_BASE + 0x0048) : 0x7048)
+#define AR_RTC_FORCE_DERIVED_CLK    0x2
+
+#define AR_RTC_FORCE_WAKE \
+	((AR_SREV_9100(ah)) ? (AR_RTC_BASE + 0x004c) : 0x704c)
+#define AR_RTC_FORCE_WAKE_EN        0x00000001
+#define AR_RTC_FORCE_WAKE_ON_INT    0x00000002
+
+
+#define AR_RTC_INTR_CAUSE \
+	((AR_SREV_9100(ah)) ? (AR_RTC_BASE + 0x0050) : 0x7050)
+
+#define AR_RTC_INTR_ENABLE \
+	((AR_SREV_9100(ah)) ? (AR_RTC_BASE + 0x0054) : 0x7054)
+
+#define AR_RTC_INTR_MASK \
+	((AR_SREV_9100(ah)) ? (AR_RTC_BASE + 0x0058) : 0x7058)
+
+#define	AR_SEQ_MASK	0x8060
+
+#define AR_AN_RF2G1_CH0         0x7810
+#define AR_AN_RF2G1_CH0_OB      0x03800000
+#define AR_AN_RF2G1_CH0_OB_S    23
+#define AR_AN_RF2G1_CH0_DB      0x1C000000
+#define AR_AN_RF2G1_CH0_DB_S    26
+
+#define AR_AN_RF5G1_CH0         0x7818
+#define AR_AN_RF5G1_CH0_OB5     0x00070000
+#define AR_AN_RF5G1_CH0_OB5_S   16
+#define AR_AN_RF5G1_CH0_DB5     0x00380000
+#define AR_AN_RF5G1_CH0_DB5_S   19
+
+#define AR_AN_RF2G1_CH1         0x7834
+#define AR_AN_RF2G1_CH1_OB      0x03800000
+#define AR_AN_RF2G1_CH1_OB_S    23
+#define AR_AN_RF2G1_CH1_DB      0x1C000000
+#define AR_AN_RF2G1_CH1_DB_S    26
+
+#define AR_AN_RF5G1_CH1         0x783C
+#define AR_AN_RF5G1_CH1_OB5     0x00070000
+#define AR_AN_RF5G1_CH1_OB5_S   16
+#define AR_AN_RF5G1_CH1_DB5     0x00380000
+#define AR_AN_RF5G1_CH1_DB5_S   19
+
+#define AR_AN_TOP2                  0x7894
+#define AR_AN_TOP2_XPABIAS_LVL      0xC0000000
+#define AR_AN_TOP2_XPABIAS_LVL_S    30
+#define AR_AN_TOP2_LOCALBIAS        0x00200000
+#define AR_AN_TOP2_LOCALBIAS_S      21
+#define AR_AN_TOP2_PWDCLKIND        0x00400000
+#define AR_AN_TOP2_PWDCLKIND_S      22
+
+#define AR_AN_SYNTH9            0x7868
+#define AR_AN_SYNTH9_REFDIVA    0xf8000000
+#define AR_AN_SYNTH9_REFDIVA_S  27
+
+#define AR_STA_ID0                 0x8000
+#define AR_STA_ID1                 0x8004
+#define AR_STA_ID1_SADH_MASK       0x0000FFFF
+#define AR_STA_ID1_STA_AP          0x00010000
+#define AR_STA_ID1_ADHOC           0x00020000
+#define AR_STA_ID1_PWR_SAV         0x00040000
+#define AR_STA_ID1_KSRCHDIS        0x00080000
+#define AR_STA_ID1_PCF             0x00100000
+#define AR_STA_ID1_USE_DEFANT      0x00200000
+#define AR_STA_ID1_DEFANT_UPDATE   0x00400000
+#define AR_STA_ID1_RTS_USE_DEF     0x00800000
+#define AR_STA_ID1_ACKCTS_6MB      0x01000000
+#define AR_STA_ID1_BASE_RATE_11B   0x02000000
+#define AR_STA_ID1_SECTOR_SELF_GEN 0x04000000
+#define AR_STA_ID1_CRPT_MIC_ENABLE 0x08000000
+#define AR_STA_ID1_KSRCH_MODE      0x10000000
+#define AR_STA_ID1_PRESERVE_SEQNUM 0x20000000
+#define AR_STA_ID1_CBCIV_ENDIAN    0x40000000
+#define AR_STA_ID1_MCAST_KSRCH     0x80000000
+
+#define AR_BSS_ID0          0x8008
+#define AR_BSS_ID1          0x800C
+#define AR_BSS_ID1_U16       0x0000FFFF
+#define AR_BSS_ID1_AID       0x07FF0000
+#define AR_BSS_ID1_AID_S     16
+
+#define AR_BCN_RSSI_AVE      0x8010
+#define AR_BCN_RSSI_AVE_MASK 0x00000FFF
+
+#define AR_TIME_OUT         0x8014
+#define AR_TIME_OUT_ACK      0x00003FFF
+#define AR_TIME_OUT_ACK_S    0
+#define AR_TIME_OUT_CTS      0x3FFF0000
+#define AR_TIME_OUT_CTS_S    16
+
+#define AR_RSSI_THR          0x8018
+#define AR_RSSI_THR_MASK     0x000000FF
+#define AR_RSSI_THR_BM_THR   0x0000FF00
+#define AR_RSSI_THR_BM_THR_S 8
+#define AR_RSSI_BCN_WEIGHT   0x1F000000
+#define AR_RSSI_BCN_WEIGHT_S 24
+#define AR_RSSI_BCN_RSSI_RST 0x20000000
+
+#define AR_USEC              0x801c
+#define AR_USEC_USEC         0x0000007F
+#define AR_USEC_TX_LAT       0x007FC000
+#define AR_USEC_TX_LAT_S     14
+#define AR_USEC_RX_LAT       0x1F800000
+#define AR_USEC_RX_LAT_S     23
+
+#define AR_RESET_TSF        0x8020
+#define AR_RESET_TSF_ONCE   0x01000000
+
+#define AR_MAX_CFP_DUR      0x8038
+#define AR_CFP_VAL          0x0000FFFF
+
+#define AR_RX_FILTER        0x803C
+#define AR_RX_FILTER_ALL    0x00000000
+#define AR_RX_UCAST         0x00000001
+#define AR_RX_MCAST         0x00000002
+#define AR_RX_BCAST         0x00000004
+#define AR_RX_CONTROL       0x00000008
+#define AR_RX_BEACON        0x00000010
+#define AR_RX_PROM          0x00000020
+#define AR_RX_PROBE_REQ     0x00000080
+#define AR_RX_MY_BEACON     0x00000200
+#define AR_RX_COMPR_BAR     0x00000400
+#define AR_RX_COMPR_BA      0x00000800
+#define AR_RX_UNCOM_BA_BAR  0x00001000
+
+#define AR_MCAST_FIL0       0x8040
+#define AR_MCAST_FIL1       0x8044
+
+#define AR_DIAG_SW                  0x8048
+#define AR_DIAG_CACHE_ACK           0x00000001
+#define AR_DIAG_ACK_DIS             0x00000002
+#define AR_DIAG_CTS_DIS             0x00000004
+#define AR_DIAG_ENCRYPT_DIS         0x00000008
+#define AR_DIAG_DECRYPT_DIS         0x00000010
+#define AR_DIAG_RX_DIS              0x00000020
+#define AR_DIAG_LOOP_BACK           0x00000040
+#define AR_DIAG_CORR_FCS            0x00000080
+#define AR_DIAG_CHAN_INFO           0x00000100
+#define AR_DIAG_SCRAM_SEED          0x0001FE00
+#define AR_DIAG_SCRAM_SEED_S        8
+#define AR_DIAG_FRAME_NV0           0x00020000
+#define AR_DIAG_OBS_PT_SEL1         0x000C0000
+#define AR_DIAG_OBS_PT_SEL1_S       18
+#define AR_DIAG_FORCE_RX_CLEAR      0x00100000
+#define AR_DIAG_IGNORE_VIRT_CS      0x00200000
+#define AR_DIAG_FORCE_CH_IDLE_HIGH  0x00400000
+#define AR_DIAG_EIFS_CTRL_ENA       0x00800000
+#define AR_DIAG_DUAL_CHAIN_INFO     0x01000000
+#define AR_DIAG_RX_ABORT            0x02000000
+#define AR_DIAG_SATURATE_CYCLE_CNT  0x04000000
+#define AR_DIAG_OBS_PT_SEL2         0x08000000
+#define AR_DIAG_RX_CLEAR_CTL_LOW    0x10000000
+#define AR_DIAG_RX_CLEAR_EXT_LOW    0x20000000
+
+#define AR_TSF_L32          0x804c
+#define AR_TSF_U32          0x8050
+
+#define AR_TST_ADDAC        0x8054
+#define AR_DEF_ANTENNA      0x8058
+
+#define AR_AES_MUTE_MASK0       0x805c
+#define AR_AES_MUTE_MASK0_FC    0x0000FFFF
+#define AR_AES_MUTE_MASK0_QOS   0xFFFF0000
+#define AR_AES_MUTE_MASK0_QOS_S 16
+
+#define AR_AES_MUTE_MASK1       0x8060
+#define AR_AES_MUTE_MASK1_SEQ   0x0000FFFF
+
+#define AR_GATED_CLKS       0x8064
+#define AR_GATED_CLKS_TX    0x00000002
+#define AR_GATED_CLKS_RX    0x00000004
+#define AR_GATED_CLKS_REG   0x00000008
+
+#define AR_OBS_BUS_CTRL     0x8068
+#define AR_OBS_BUS_SEL_1    0x00040000
+#define AR_OBS_BUS_SEL_2    0x00080000
+#define AR_OBS_BUS_SEL_3    0x000C0000
+#define AR_OBS_BUS_SEL_4    0x08040000
+#define AR_OBS_BUS_SEL_5    0x08080000
+
+#define AR_OBS_BUS_1               0x806c
+#define AR_OBS_BUS_1_PCU           0x00000001
+#define AR_OBS_BUS_1_RX_END        0x00000002
+#define AR_OBS_BUS_1_RX_WEP        0x00000004
+#define AR_OBS_BUS_1_RX_BEACON     0x00000008
+#define AR_OBS_BUS_1_RX_FILTER     0x00000010
+#define AR_OBS_BUS_1_TX_HCF        0x00000020
+#define AR_OBS_BUS_1_QUIET_TIME    0x00000040
+#define AR_OBS_BUS_1_CHAN_IDLE     0x00000080
+#define AR_OBS_BUS_1_TX_HOLD       0x00000100
+#define AR_OBS_BUS_1_TX_FRAME      0x00000200
+#define AR_OBS_BUS_1_RX_FRAME      0x00000400
+#define AR_OBS_BUS_1_RX_CLEAR      0x00000800
+#define AR_OBS_BUS_1_WEP_STATE     0x0003F000
+#define AR_OBS_BUS_1_WEP_STATE_S   12
+#define AR_OBS_BUS_1_RX_STATE      0x01F00000
+#define AR_OBS_BUS_1_RX_STATE_S    20
+#define AR_OBS_BUS_1_TX_STATE      0x7E000000
+#define AR_OBS_BUS_1_TX_STATE_S    25
+
+#define AR_LAST_TSTP        0x8080
+#define AR_NAV              0x8084
+#define AR_RTS_OK           0x8088
+#define AR_RTS_FAIL         0x808c
+#define AR_ACK_FAIL         0x8090
+#define AR_FCS_FAIL         0x8094
+#define AR_BEACON_CNT       0x8098
+
+#define AR_SLEEP1               0x80d4
+#define AR_SLEEP1_ASSUME_DTIM   0x00080000
+#define AR_SLEEP1_CAB_TIMEOUT   0xFFE00000
+#define AR_SLEEP1_CAB_TIMEOUT_S 21
+
+#define AR_SLEEP2                   0x80d8
+#define AR_SLEEP2_BEACON_TIMEOUT    0xFFE00000
+#define AR_SLEEP2_BEACON_TIMEOUT_S  21
+
+#define AR_BSSMSKL            0x80e0
+#define AR_BSSMSKU            0x80e4
+
+#define AR_TPC                 0x80e8
+#define AR_TPC_ACK             0x0000003f
+#define AR_TPC_ACK_S           0x00
+#define AR_TPC_CTS             0x00003f00
+#define AR_TPC_CTS_S           0x08
+#define AR_TPC_CHIRP           0x003f0000
+#define AR_TPC_CHIRP_S         0x16
+
+#define AR_TFCNT           0x80ec
+#define AR_RFCNT           0x80f0
+#define AR_RCCNT           0x80f4
+#define AR_CCCNT           0x80f8
+
+#define AR_QUIET1          0x80fc
+#define AR_QUIET1_NEXT_QUIET_S         0
+#define AR_QUIET1_NEXT_QUIET_M         0x0000ffff
+#define AR_QUIET1_QUIET_ENABLE         0x00010000
+#define AR_QUIET1_QUIET_ACK_CTS_ENABLE 0x00020000
+#define AR_QUIET2          0x8100
+#define AR_QUIET2_QUIET_PERIOD_S       0
+#define AR_QUIET2_QUIET_PERIOD_M       0x0000ffff
+#define AR_QUIET2_QUIET_DUR_S     16
+#define AR_QUIET2_QUIET_DUR       0xffff0000
+
+#define AR_TSF_PARM        0x8104
+#define AR_TSF_INCREMENT_M     0x000000ff
+#define AR_TSF_INCREMENT_S     0x00
+
+#define AR_QOS_NO_ACK              0x8108
+#define AR_QOS_NO_ACK_TWO_BIT      0x0000000f
+#define AR_QOS_NO_ACK_TWO_BIT_S    0
+#define AR_QOS_NO_ACK_BIT_OFF      0x00000070
+#define AR_QOS_NO_ACK_BIT_OFF_S    4
+#define AR_QOS_NO_ACK_BYTE_OFF     0x00000180
+#define AR_QOS_NO_ACK_BYTE_OFF_S   7
+
+#define AR_PHY_ERR         0x810c
+
+#define AR_PHY_ERR_DCHIRP      0x00000008
+#define AR_PHY_ERR_RADAR       0x00000020
+#define AR_PHY_ERR_OFDM_TIMING 0x00020000
+#define AR_PHY_ERR_CCK_TIMING  0x02000000
+
+#define AR_RXFIFO_CFG          0x8114
+
+
+#define AR_MIC_QOS_CONTROL 0x8118
+#define AR_MIC_QOS_SELECT  0x811c
+
+#define AR_PCU_MISC                0x8120
+#define AR_PCU_FORCE_BSSID_MATCH   0x00000001
+#define AR_PCU_MIC_NEW_LOC_ENA     0x00000004
+#define AR_PCU_TX_ADD_TSF          0x00000008
+#define AR_PCU_CCK_SIFS_MODE       0x00000010
+#define AR_PCU_RX_ANT_UPDT         0x00000800
+#define AR_PCU_TXOP_TBTT_LIMIT_ENA 0x00001000
+#define AR_PCU_MISS_BCN_IN_SLEEP   0x00004000
+#define AR_PCU_BUG_12306_FIX_ENA   0x00020000
+#define AR_PCU_FORCE_QUIET_COLL    0x00040000
+#define AR_PCU_TBTT_PROTECT        0x00200000
+#define AR_PCU_CLEAR_VMF           0x01000000
+#define AR_PCU_CLEAR_BA_VALID      0x04000000
+
+
+#define AR_FILT_OFDM           0x8124
+#define AR_FILT_OFDM_COUNT     0x00FFFFFF
+
+#define AR_FILT_CCK            0x8128
+#define AR_FILT_CCK_COUNT      0x00FFFFFF
+
+#define AR_PHY_ERR_1           0x812c
+#define AR_PHY_ERR_1_COUNT     0x00FFFFFF
+#define AR_PHY_ERR_MASK_1      0x8130
+
+#define AR_PHY_ERR_2           0x8134
+#define AR_PHY_ERR_2_COUNT     0x00FFFFFF
+#define AR_PHY_ERR_MASK_2      0x8138
+
+#define AR_PHY_COUNTMAX        (3 << 22)
+#define AR_MIBCNT_INTRMASK     (3 << 22)
+
+#define AR_TSF_THRESHOLD       0x813c
+#define AR_TSF_THRESHOLD_VAL   0x0000FFFF
+
+#define AR_PHY_ERR_EIFS_MASK   8144
+
+#define AR_PHY_ERR_3           0x8168
+#define AR_PHY_ERR_3_COUNT     0x00FFFFFF
+#define AR_PHY_ERR_MASK_3      0x816c
+
+#define AR_TXSIFS              0x81d0
+#define AR_TXSIFS_TIME         0x000000FF
+#define AR_TXSIFS_TX_LATENCY   0x00000F00
+#define AR_TXSIFS_TX_LATENCY_S 8
+#define AR_TXSIFS_ACK_SHIFT    0x00007000
+#define AR_TXSIFS_ACK_SHIFT_S  12
+
+#define AR_TXOP_X          0x81ec
+#define AR_TXOP_X_VAL      0x000000FF
+
+
+#define AR_TXOP_0_3    0x81f0
+#define AR_TXOP_4_7    0x81f4
+#define AR_TXOP_8_11   0x81f8
+#define AR_TXOP_12_15  0x81fc
+
+
+#define AR_NEXT_TBTT_TIMER                  0x8200
+#define AR_NEXT_DMA_BEACON_ALERT            0x8204
+#define AR_NEXT_SWBA                        0x8208
+#define AR_NEXT_CFP                         0x8208
+#define AR_NEXT_HCF                         0x820C
+#define AR_NEXT_TIM                         0x8210
+#define AR_NEXT_DTIM                        0x8214
+#define AR_NEXT_QUIET_TIMER                 0x8218
+#define AR_NEXT_NDP_TIMER                   0x821C
+
+#define AR_BEACON_PERIOD                    0x8220
+#define AR_DMA_BEACON_PERIOD                0x8224
+#define AR_SWBA_PERIOD                      0x8228
+#define AR_HCF_PERIOD                       0x822C
+#define AR_TIM_PERIOD                       0x8230
+#define AR_DTIM_PERIOD                      0x8234
+#define AR_QUIET_PERIOD                     0x8238
+#define AR_NDP_PERIOD                       0x823C
+
+#define AR_TIMER_MODE                       0x8240
+#define AR_TBTT_TIMER_EN                    0x00000001
+#define AR_DBA_TIMER_EN                     0x00000002
+#define AR_SWBA_TIMER_EN                    0x00000004
+#define AR_HCF_TIMER_EN                     0x00000008
+#define AR_TIM_TIMER_EN                     0x00000010
+#define AR_DTIM_TIMER_EN                    0x00000020
+#define AR_QUIET_TIMER_EN                   0x00000040
+#define AR_NDP_TIMER_EN                     0x00000080
+#define AR_TIMER_OVERFLOW_INDEX             0x00000700
+#define AR_TIMER_OVERFLOW_INDEX_S           8
+#define AR_TIMER_THRESH                     0xFFFFF000
+#define AR_TIMER_THRESH_S                   12
+
+#define AR_SLP32_MODE                  0x8244
+#define AR_SLP32_HALF_CLK_LATENCY      0x000FFFFF
+#define AR_SLP32_ENA                   0x00100000
+#define AR_SLP32_TSF_WRITE_STATUS      0x00200000
+
+#define AR_SLP32_WAKE              0x8248
+#define AR_SLP32_WAKE_XTL_TIME     0x0000FFFF
+
+#define AR_SLP32_INC               0x824c
+#define AR_SLP32_TST_INC           0x000FFFFF
+
+#define AR_SLP_CNT         0x8250
+#define AR_SLP_CYCLE_CNT   0x8254
+
+#define AR_SLP_MIB_CTRL    0x8258
+#define AR_SLP_MIB_CLEAR   0x00000001
+#define AR_SLP_MIB_PENDING 0x00000002
+
+#define AR_2040_MODE                0x8318
+#define AR_2040_JOINED_RX_CLEAR 0x00000001
+
+
+#define AR_EXTRCCNT         0x8328
+
+#define AR_SELFGEN_MASK         0x832c
+
+#define AR_PCU_TXBUF_CTRL               0x8340
+#define AR_PCU_TXBUF_CTRL_SIZE_MASK     0x7FF
+#define AR_PCU_TXBUF_CTRL_USABLE_SIZE   0x700
+#define AR_9285_PCU_TXBUF_CTRL_USABLE_SIZE   0x380
+
+#define AR_KEYTABLE_0           0x8800
+#define AR_KEYTABLE(_n)         (AR_KEYTABLE_0 + ((_n)*32))
+#define AR_KEY_CACHE_SIZE       128
+#define AR_RSVD_KEYTABLE_ENTRIES 4
+#define AR_KEY_TYPE             0x00000007
+#define AR_KEYTABLE_TYPE_40     0x00000000
+#define AR_KEYTABLE_TYPE_104    0x00000001
+#define AR_KEYTABLE_TYPE_128    0x00000003
+#define AR_KEYTABLE_TYPE_TKIP   0x00000004
+#define AR_KEYTABLE_TYPE_AES    0x00000005
+#define AR_KEYTABLE_TYPE_CCM    0x00000006
+#define AR_KEYTABLE_TYPE_CLR    0x00000007
+#define AR_KEYTABLE_ANT         0x00000008
+#define AR_KEYTABLE_VALID       0x00008000
+#define AR_KEYTABLE_KEY0(_n)    (AR_KEYTABLE(_n) + 0)
+#define AR_KEYTABLE_KEY1(_n)    (AR_KEYTABLE(_n) + 4)
+#define AR_KEYTABLE_KEY2(_n)    (AR_KEYTABLE(_n) + 8)
+#define AR_KEYTABLE_KEY3(_n)    (AR_KEYTABLE(_n) + 12)
+#define AR_KEYTABLE_KEY4(_n)    (AR_KEYTABLE(_n) + 16)
+#define AR_KEYTABLE_TYPE(_n)    (AR_KEYTABLE(_n) + 20)
+#define AR_KEYTABLE_MAC0(_n)    (AR_KEYTABLE(_n) + 24)
+#define AR_KEYTABLE_MAC1(_n)    (AR_KEYTABLE(_n) + 28)
+
+#endif
diff --git a/drivers/net/wireless/ath9k/regd.c b/drivers/net/wireless/ath9k/regd.c
new file mode 100644
index 000000000000..62e28887ccd3
--- /dev/null
+++ b/drivers/net/wireless/ath9k/regd.c
@@ -0,0 +1,1026 @@
+/*
+ * Copyright (c) 2008 Atheros Communications Inc.
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include "core.h"
+#include "hw.h"
+#include "regd.h"
+#include "regd_common.h"
+
+static int ath9k_regd_chansort(const void *a, const void *b)
+{
+	const struct ath9k_channel *ca = a;
+	const struct ath9k_channel *cb = b;
+
+	return (ca->channel == cb->channel) ?
+	    (ca->channelFlags & CHAN_FLAGS) -
+	    (cb->channelFlags & CHAN_FLAGS) : ca->channel - cb->channel;
+}
+
+static void
+ath9k_regd_sort(void *a, u32 n, u32 size, ath_hal_cmp_t *cmp)
+{
+	u8 *aa = a;
+	u8 *ai, *t;
+
+	for (ai = aa + size; --n >= 1; ai += size)
+		for (t = ai; t > aa; t -= size) {
+			u8 *u = t - size;
+			if (cmp(u, t) <= 0)
+				break;
+			swap(u, t, size);
+		}
+}
+
+static u16 ath9k_regd_get_eepromRD(struct ath_hal *ah)
+{
+	return ah->ah_currentRD & ~WORLDWIDE_ROAMING_FLAG;
+}
+
+static bool ath9k_regd_is_chan_bm_zero(u64 *bitmask)
+{
+	int i;
+
+	for (i = 0; i < BMLEN; i++) {
+		if (bitmask[i] != 0)
+			return false;
+	}
+	return true;
+}
+
+static bool ath9k_regd_is_eeprom_valid(struct ath_hal *ah)
+{
+	u16 rd = ath9k_regd_get_eepromRD(ah);
+	int i;
+
+	if (rd & COUNTRY_ERD_FLAG) {
+		u16 cc = rd & ~COUNTRY_ERD_FLAG;
+		for (i = 0; i < ARRAY_SIZE(allCountries); i++)
+			if (allCountries[i].countryCode == cc)
+				return true;
+	} else {
+		for (i = 0; i < ARRAY_SIZE(regDomainPairs); i++)
+			if (regDomainPairs[i].regDmnEnum == rd)
+				return true;
+	}
+	DPRINTF(ah->ah_sc, ATH_DBG_REGULATORY,
+		 "%s: invalid regulatory domain/country code 0x%x\n",
+		 __func__, rd);
+	return false;
+}
+
+static bool ath9k_regd_is_fcc_midband_supported(struct ath_hal *ah)
+{
+	u32 regcap;
+
+	regcap = ah->ah_caps.reg_cap;
+
+	if (regcap & AR_EEPROM_EEREGCAP_EN_FCC_MIDBAND)
+		return true;
+	else
+		return false;
+}
+
+static bool ath9k_regd_is_ccode_valid(struct ath_hal *ah,
+				      u16 cc)
+{
+	u16 rd;
+	int i;
+
+	if (cc == CTRY_DEFAULT)
+		return true;
+	if (cc == CTRY_DEBUG)
+		return true;
+
+	rd = ath9k_regd_get_eepromRD(ah);
+	DPRINTF(ah->ah_sc, ATH_DBG_REGULATORY, "%s: EEPROM regdomain 0x%x\n",
+		 __func__, rd);
+
+	if (rd & COUNTRY_ERD_FLAG) {
+		DPRINTF(ah->ah_sc, ATH_DBG_REGULATORY,
+			"%s: EEPROM setting is country code %u\n",
+			__func__, rd & ~COUNTRY_ERD_FLAG);
+		return cc == (rd & ~COUNTRY_ERD_FLAG);
+	}
+
+	for (i = 0; i < ARRAY_SIZE(allCountries); i++) {
+		if (cc == allCountries[i].countryCode) {
+#ifdef AH_SUPPORT_11D
+			if ((rd & WORLD_SKU_MASK) == WORLD_SKU_PREFIX)
+				return true;
+#endif
+			if (allCountries[i].regDmnEnum == rd ||
+			    rd == DEBUG_REG_DMN || rd == NO_ENUMRD)
+				return true;
+		}
+	}
+	return false;
+}
+
+static void
+ath9k_regd_get_wmodes_nreg(struct ath_hal *ah,
+			   struct country_code_to_enum_rd *country,
+			   struct regDomain *rd5GHz,
+			   unsigned long *modes_allowed)
+{
+	bitmap_copy(modes_allowed, ah->ah_caps.wireless_modes, ATH9K_MODE_MAX);
+
+	if (test_bit(ATH9K_MODE_11G, ah->ah_caps.wireless_modes) &&
+	    (!country->allow11g))
+		clear_bit(ATH9K_MODE_11G, modes_allowed);
+
+	if (test_bit(ATH9K_MODE_11A, ah->ah_caps.wireless_modes) &&
+	    (ath9k_regd_is_chan_bm_zero(rd5GHz->chan11a)))
+		clear_bit(ATH9K_MODE_11A, modes_allowed);
+
+	if (test_bit(ATH9K_MODE_11NG_HT20, ah->ah_caps.wireless_modes)
+	    && (!country->allow11ng20))
+		clear_bit(ATH9K_MODE_11NG_HT20, modes_allowed);
+
+	if (test_bit(ATH9K_MODE_11NA_HT20, ah->ah_caps.wireless_modes)
+	    && (!country->allow11na20))
+		clear_bit(ATH9K_MODE_11NA_HT20, modes_allowed);
+
+	if (test_bit(ATH9K_MODE_11NG_HT40PLUS, ah->ah_caps.wireless_modes) &&
+	    (!country->allow11ng40))
+		clear_bit(ATH9K_MODE_11NG_HT40PLUS, modes_allowed);
+
+	if (test_bit(ATH9K_MODE_11NG_HT40MINUS, ah->ah_caps.wireless_modes) &&
+	    (!country->allow11ng40))
+		clear_bit(ATH9K_MODE_11NG_HT40MINUS, modes_allowed);
+
+	if (test_bit(ATH9K_MODE_11NA_HT40PLUS, ah->ah_caps.wireless_modes) &&
+	    (!country->allow11na40))
+		clear_bit(ATH9K_MODE_11NA_HT40PLUS, modes_allowed);
+
+	if (test_bit(ATH9K_MODE_11NA_HT40MINUS, ah->ah_caps.wireless_modes) &&
+	    (!country->allow11na40))
+		clear_bit(ATH9K_MODE_11NA_HT40MINUS, modes_allowed);
+}
+
+bool ath9k_regd_is_public_safety_sku(struct ath_hal *ah)
+{
+	u16 rd;
+
+	rd = ath9k_regd_get_eepromRD(ah);
+
+	switch (rd) {
+	case FCC4_FCCA:
+	case (CTRY_UNITED_STATES_FCC49 | COUNTRY_ERD_FLAG):
+		return true;
+	case DEBUG_REG_DMN:
+	case NO_ENUMRD:
+		if (ah->ah_countryCode == CTRY_UNITED_STATES_FCC49)
+			return true;
+		break;
+	}
+	return false;
+}
+
+static struct country_code_to_enum_rd*
+ath9k_regd_find_country(u16 countryCode)
+{
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(allCountries); i++) {
+		if (allCountries[i].countryCode == countryCode)
+			return &allCountries[i];
+	}
+	return NULL;
+}
+
+static u16 ath9k_regd_get_default_country(struct ath_hal *ah)
+{
+	u16 rd;
+	int i;
+
+	rd = ath9k_regd_get_eepromRD(ah);
+	if (rd & COUNTRY_ERD_FLAG) {
+		struct country_code_to_enum_rd *country = NULL;
+		u16 cc = rd & ~COUNTRY_ERD_FLAG;
+
+		country = ath9k_regd_find_country(cc);
+		if (country != NULL)
+			return cc;
+	}
+
+	for (i = 0; i < ARRAY_SIZE(regDomainPairs); i++)
+		if (regDomainPairs[i].regDmnEnum == rd) {
+			if (regDomainPairs[i].singleCC != 0)
+				return regDomainPairs[i].singleCC;
+			else
+				i = ARRAY_SIZE(regDomainPairs);
+		}
+	return CTRY_DEFAULT;
+}
+
+static bool ath9k_regd_is_valid_reg_domain(int regDmn,
+					   struct regDomain *rd)
+{
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(regDomains); i++) {
+		if (regDomains[i].regDmnEnum == regDmn) {
+			if (rd != NULL) {
+				memcpy(rd, &regDomains[i],
+				       sizeof(struct regDomain));
+			}
+			return true;
+		}
+	}
+	return false;
+}
+
+static bool ath9k_regd_is_valid_reg_domainPair(int regDmnPair)
+{
+	int i;
+
+	if (regDmnPair == NO_ENUMRD)
+		return false;
+	for (i = 0; i < ARRAY_SIZE(regDomainPairs); i++) {
+		if (regDomainPairs[i].regDmnEnum == regDmnPair)
+			return true;
+	}
+	return false;
+}
+
+static bool
+ath9k_regd_get_wmode_regdomain(struct ath_hal *ah, int regDmn,
+			       u16 channelFlag, struct regDomain *rd)
+{
+	int i, found;
+	u64 flags = NO_REQ;
+	struct reg_dmn_pair_mapping *regPair = NULL;
+	int regOrg;
+
+	regOrg = regDmn;
+	if (regDmn == CTRY_DEFAULT) {
+		u16 rdnum;
+		rdnum = ath9k_regd_get_eepromRD(ah);
+
+		if (!(rdnum & COUNTRY_ERD_FLAG)) {
+			if (ath9k_regd_is_valid_reg_domain(rdnum, NULL) ||
+			    ath9k_regd_is_valid_reg_domainPair(rdnum)) {
+				regDmn = rdnum;
+			}
+		}
+	}
+
+	if ((regDmn & MULTI_DOMAIN_MASK) == 0) {
+		for (i = 0, found = 0;
+		     (i < ARRAY_SIZE(regDomainPairs)) && (!found); i++) {
+			if (regDomainPairs[i].regDmnEnum == regDmn) {
+				regPair = &regDomainPairs[i];
+				found = 1;
+			}
+		}
+		if (!found) {
+			DPRINTF(ah->ah_sc, ATH_DBG_REGULATORY,
+				"%s: Failed to find reg domain pair %u\n",
+				__func__, regDmn);
+			return false;
+		}
+		if (!(channelFlag & CHANNEL_2GHZ)) {
+			regDmn = regPair->regDmn5GHz;
+			flags = regPair->flags5GHz;
+		}
+		if (channelFlag & CHANNEL_2GHZ) {
+			regDmn = regPair->regDmn2GHz;
+			flags = regPair->flags2GHz;
+		}
+	}
+
+	found = ath9k_regd_is_valid_reg_domain(regDmn, rd);
+	if (!found) {
+		DPRINTF(ah->ah_sc, ATH_DBG_REGULATORY,
+			"%s: Failed to find unitary reg domain %u\n",
+			__func__, regDmn);
+		return false;
+	} else {
+		rd->pscan &= regPair->pscanMask;
+		if (((regOrg & MULTI_DOMAIN_MASK) == 0) &&
+		    (flags != NO_REQ)) {
+			rd->flags = flags;
+		}
+
+		rd->flags &= (channelFlag & CHANNEL_2GHZ) ?
+		    REG_DOMAIN_2GHZ_MASK : REG_DOMAIN_5GHZ_MASK;
+		return true;
+	}
+}
+
+static bool ath9k_regd_is_bit_set(int bit, u64 *bitmask)
+{
+	int byteOffset, bitnum;
+	u64 val;
+
+	byteOffset = bit / 64;
+	bitnum = bit - byteOffset * 64;
+	val = ((u64) 1) << bitnum;
+	if (bitmask[byteOffset] & val)
+		return true;
+	else
+		return false;
+}
+
+static void
+ath9k_regd_add_reg_classid(u8 *regclassids, u32 maxregids,
+			   u32 *nregids, u8 regclassid)
+{
+	int i;
+
+	if (regclassid == 0)
+		return;
+
+	for (i = 0; i < maxregids; i++) {
+		if (regclassids[i] == regclassid)
+			return;
+		if (regclassids[i] == 0)
+			break;
+	}
+
+	if (i == maxregids)
+		return;
+	else {
+		regclassids[i] = regclassid;
+		*nregids += 1;
+	}
+
+	return;
+}
+
+static bool
+ath9k_regd_get_eeprom_reg_ext_bits(struct ath_hal *ah,
+				   enum reg_ext_bitmap bit)
+{
+	return (ah->ah_currentRDExt & (1 << bit)) ? true : false;
+}
+
+#ifdef ATH_NF_PER_CHAN
+
+static void ath9k_regd_init_rf_buffer(struct ath9k_channel *ichans,
+				      int nchans)
+{
+	int i, j, next;
+
+	for (next = 0; next < nchans; next++) {
+		for (i = 0; i < NUM_NF_READINGS; i++) {
+			ichans[next].nfCalHist[i].currIndex = 0;
+			ichans[next].nfCalHist[i].privNF =
+			    AR_PHY_CCA_MAX_GOOD_VALUE;
+			ichans[next].nfCalHist[i].invalidNFcount =
+			    AR_PHY_CCA_FILTERWINDOW_LENGTH;
+			for (j = 0; j < ATH9K_NF_CAL_HIST_MAX; j++) {
+				ichans[next].nfCalHist[i].nfCalBuffer[j] =
+				    AR_PHY_CCA_MAX_GOOD_VALUE;
+			}
+		}
+	}
+}
+#endif
+
+static int ath9k_regd_is_chan_present(struct ath_hal *ah,
+				      u16 c)
+{
+	int i;
+
+	for (i = 0; i < 150; i++) {
+		if (!ah->ah_channels[i].channel)
+			return -1;
+		else if (ah->ah_channels[i].channel == c)
+			return i;
+	}
+
+	return -1;
+}
+
+static bool
+ath9k_regd_add_channel(struct ath_hal *ah,
+		       u16 c,
+		       u16 c_lo,
+		       u16 c_hi,
+		       u16 maxChan,
+		       u8 ctl,
+		       int pos,
+		       struct regDomain rd5GHz,
+		       struct RegDmnFreqBand *fband,
+		       struct regDomain *rd,
+		       const struct cmode *cm,
+		       struct ath9k_channel *ichans,
+		       bool enableExtendedChannels)
+{
+	struct ath9k_channel *chan;
+	int ret;
+	u32 channelFlags = 0;
+	u8 privFlags = 0;
+
+	if (!(c_lo <= c && c <= c_hi)) {
+		DPRINTF(ah->ah_sc, ATH_DBG_REGULATORY,
+			"%s: c %u out of range [%u..%u]\n",
+			__func__, c, c_lo, c_hi);
+		return false;
+	}
+	if ((fband->channelBW == CHANNEL_HALF_BW) &&
+	    !(ah->ah_caps.hw_caps & ATH9K_HW_CAP_CHAN_HALFRATE)) {
+		DPRINTF(ah->ah_sc, ATH_DBG_REGULATORY,
+			"%s: Skipping %u half rate channel\n",
+			__func__, c);
+		return false;
+	}
+
+	if ((fband->channelBW == CHANNEL_QUARTER_BW) &&
+	    !(ah->ah_caps.hw_caps & ATH9K_HW_CAP_CHAN_QUARTERRATE)) {
+		DPRINTF(ah->ah_sc, ATH_DBG_REGULATORY,
+			"%s: Skipping %u quarter rate channel\n",
+			__func__, c);
+		return false;
+	}
+
+	if (((c + fband->channelSep) / 2) > (maxChan + HALF_MAXCHANBW)) {
+		DPRINTF(ah->ah_sc, ATH_DBG_REGULATORY,
+			"%s: c %u > maxChan %u\n",
+			__func__, c, maxChan);
+		return false;
+	}
+
+	if ((fband->usePassScan & IS_ECM_CHAN) && !enableExtendedChannels) {
+		DPRINTF(ah->ah_sc, ATH_DBG_REGULATORY,
+			"Skipping ecm channel\n");
+		return false;
+	}
+
+	if ((rd->flags & NO_HOSTAP) && (ah->ah_opmode == ATH9K_M_HOSTAP)) {
+		DPRINTF(ah->ah_sc, ATH_DBG_REGULATORY,
+			"Skipping HOSTAP channel\n");
+		return false;
+	}
+
+	if (IS_HT40_MODE(cm->mode) &&
+	    !(ath9k_regd_get_eeprom_reg_ext_bits(ah, REG_EXT_FCC_DFS_HT40)) &&
+	    (fband->useDfs) &&
+	    (rd->conformanceTestLimit != MKK)) {
+		DPRINTF(ah->ah_sc, ATH_DBG_REGULATORY,
+			"Skipping HT40 channel (en_fcc_dfs_ht40 = 0)\n");
+		return false;
+	}
+
+	if (IS_HT40_MODE(cm->mode) &&
+	    !(ath9k_regd_get_eeprom_reg_ext_bits(ah,
+						 REG_EXT_JAPAN_NONDFS_HT40)) &&
+	    !(fband->useDfs) && (rd->conformanceTestLimit == MKK)) {
+		DPRINTF(ah->ah_sc, ATH_DBG_REGULATORY,
+			"Skipping HT40 channel (en_jap_ht40 = 0)\n");
+		return false;
+	}
+
+	if (IS_HT40_MODE(cm->mode) &&
+	    !(ath9k_regd_get_eeprom_reg_ext_bits(ah, REG_EXT_JAPAN_DFS_HT40)) &&
+	    (fband->useDfs) &&
+	    (rd->conformanceTestLimit == MKK)) {
+		DPRINTF(ah->ah_sc, ATH_DBG_REGULATORY,
+			"Skipping HT40 channel (en_jap_dfs_ht40 = 0)\n");
+		return false;
+	}
+
+	/* Calculate channel flags */
+
+	channelFlags = cm->flags;
+
+	switch (fband->channelBW) {
+	case CHANNEL_HALF_BW:
+		channelFlags |= CHANNEL_HALF;
+		break;
+	case CHANNEL_QUARTER_BW:
+		channelFlags |= CHANNEL_QUARTER;
+		break;
+	}
+
+	if (fband->usePassScan & rd->pscan)
+		channelFlags |= CHANNEL_PASSIVE;
+	else
+		channelFlags &= ~CHANNEL_PASSIVE;
+	if (fband->useDfs & rd->dfsMask)
+		privFlags = CHANNEL_DFS;
+	else
+		privFlags = 0;
+	if (rd->flags & LIMIT_FRAME_4MS)
+		privFlags |= CHANNEL_4MS_LIMIT;
+	if (privFlags & CHANNEL_DFS)
+		privFlags |= CHANNEL_DISALLOW_ADHOC;
+	if (rd->flags & ADHOC_PER_11D)
+		privFlags |= CHANNEL_PER_11D_ADHOC;
+
+	if (channelFlags & CHANNEL_PASSIVE) {
+		if ((c < 2412) || (c > 2462)) {
+			if (rd5GHz.regDmnEnum == MKK1 ||
+			    rd5GHz.regDmnEnum == MKK2) {
+				u32 regcap = ah->ah_caps.reg_cap;
+				if (!(regcap &
+				      (AR_EEPROM_EEREGCAP_EN_KK_U1_EVEN |
+				       AR_EEPROM_EEREGCAP_EN_KK_U2 |
+				       AR_EEPROM_EEREGCAP_EN_KK_MIDBAND)) &&
+				    isUNII1OddChan(c)) {
+					channelFlags &= ~CHANNEL_PASSIVE;
+				} else {
+					privFlags |= CHANNEL_DISALLOW_ADHOC;
+				}
+			} else {
+				privFlags |= CHANNEL_DISALLOW_ADHOC;
+			}
+		}
+	}
+
+	if ((cm->mode == ATH9K_MODE_11A) ||
+	    (cm->mode == ATH9K_MODE_11NA_HT20) ||
+	    (cm->mode == ATH9K_MODE_11NA_HT40PLUS) ||
+	    (cm->mode == ATH9K_MODE_11NA_HT40MINUS)) {
+		if (rd->flags & (ADHOC_NO_11A | DISALLOW_ADHOC_11A))
+			privFlags |= CHANNEL_DISALLOW_ADHOC;
+	}
+
+	/* Fill in channel details */
+
+	ret = ath9k_regd_is_chan_present(ah, c);
+	if (ret == -1) {
+		chan = &ah->ah_channels[pos];
+		chan->channel = c;
+		chan->maxRegTxPower = fband->powerDfs;
+		chan->antennaMax = fband->antennaMax;
+		chan->regDmnFlags = rd->flags;
+		chan->maxTxPower = AR5416_MAX_RATE_POWER;
+		chan->minTxPower = AR5416_MAX_RATE_POWER;
+		chan->channelFlags = channelFlags;
+		chan->privFlags = privFlags;
+	} else {
+		chan = &ah->ah_channels[ret];
+		chan->channelFlags |= channelFlags;
+		chan->privFlags |= privFlags;
+	}
+
+	/* Set CTLs */
+
+	if ((cm->flags & CHANNEL_ALL) == CHANNEL_A)
+		chan->conformanceTestLimit[0] = ctl;
+	else if ((cm->flags & CHANNEL_ALL) == CHANNEL_B)
+		chan->conformanceTestLimit[1] = ctl;
+	else if ((cm->flags & CHANNEL_ALL) == CHANNEL_G)
+		chan->conformanceTestLimit[2] = ctl;
+
+	return (ret == -1) ? true : false;
+}
+
+static bool ath9k_regd_japan_check(struct ath_hal *ah,
+				   int b,
+				   struct regDomain *rd5GHz)
+{
+	bool skipband = false;
+	int i;
+	u32 regcap;
+
+	for (i = 0; i < ARRAY_SIZE(j_bandcheck); i++) {
+		if (j_bandcheck[i].freqbandbit == b) {
+			regcap = ah->ah_caps.reg_cap;
+			if ((j_bandcheck[i].eepromflagtocheck & regcap) == 0) {
+				skipband = true;
+			} else if ((regcap & AR_EEPROM_EEREGCAP_EN_KK_U2) ||
+				  (regcap & AR_EEPROM_EEREGCAP_EN_KK_MIDBAND)) {
+				rd5GHz->dfsMask |= DFS_MKK4;
+				rd5GHz->pscan |= PSCAN_MKK3;
+			}
+			break;
+		}
+	}
+
+	DPRINTF(ah->ah_sc, ATH_DBG_REGULATORY,
+		"%s: Skipping %d freq band\n",
+		__func__, j_bandcheck[i].freqbandbit);
+
+	return skipband;
+}
+
+bool
+ath9k_regd_init_channels(struct ath_hal *ah,
+			 u32 maxchans,
+			 u32 *nchans, u8 *regclassids,
+			 u32 maxregids, u32 *nregids, u16 cc,
+			 bool enableOutdoor,
+			 bool enableExtendedChannels)
+{
+	u16 maxChan = 7000;
+	struct country_code_to_enum_rd *country = NULL;
+	struct regDomain rd5GHz, rd2GHz;
+	const struct cmode *cm;
+	struct ath9k_channel *ichans = &ah->ah_channels[0];
+	int next = 0, b;
+	u8 ctl;
+	int regdmn;
+	u16 chanSep;
+	unsigned long *modes_avail;
+	DECLARE_BITMAP(modes_allowed, ATH9K_MODE_MAX);
+
+	DPRINTF(ah->ah_sc, ATH_DBG_REGULATORY, "%s: cc %u %s %s\n",
+		 __func__, cc,
+		 enableOutdoor ? "Enable outdoor" : "",
+		 enableExtendedChannels ? "Enable ecm" : "");
+
+	if (!ath9k_regd_is_ccode_valid(ah, cc)) {
+		DPRINTF(ah->ah_sc, ATH_DBG_REGULATORY,
+			"%s: invalid country code %d\n", __func__, cc);
+		return false;
+	}
+
+	if (!ath9k_regd_is_eeprom_valid(ah)) {
+		DPRINTF(ah->ah_sc, ATH_DBG_REGULATORY,
+			"%s: invalid EEPROM contents\n", __func__);
+		return false;
+	}
+
+	ah->ah_countryCode = ath9k_regd_get_default_country(ah);
+
+	if (ah->ah_countryCode == CTRY_DEFAULT) {
+		ah->ah_countryCode = cc & COUNTRY_CODE_MASK;
+		if ((ah->ah_countryCode == CTRY_DEFAULT) &&
+		    (ath9k_regd_get_eepromRD(ah) == CTRY_DEFAULT)) {
+			ah->ah_countryCode = CTRY_UNITED_STATES;
+		}
+	}
+
+#ifdef AH_SUPPORT_11D
+	if (ah->ah_countryCode == CTRY_DEFAULT) {
+		regdmn = ath9k_regd_get_eepromRD(ah);
+		country = NULL;
+	} else {
+#endif
+		country = ath9k_regd_find_country(ah->ah_countryCode);
+		if (country == NULL) {
+			DPRINTF(ah->ah_sc, ATH_DBG_REGULATORY,
+				"Country is NULL!!!!, cc= %d\n",
+				ah->ah_countryCode);
+			return false;
+		} else {
+			regdmn = country->regDmnEnum;
+#ifdef AH_SUPPORT_11D
+			if (((ath9k_regd_get_eepromRD(ah) &
+			      WORLD_SKU_MASK) == WORLD_SKU_PREFIX) &&
+			    (cc == CTRY_UNITED_STATES)) {
+				if (!isWwrSKU_NoMidband(ah)
+				    && ath9k_regd_is_fcc_midband_supported(ah))
+					regdmn = FCC3_FCCA;
+				else
+					regdmn = FCC1_FCCA;
+			}
+#endif
+		}
+#ifdef AH_SUPPORT_11D
+	}
+#endif
+	if (!ath9k_regd_get_wmode_regdomain(ah,
+					    regdmn,
+					    ~CHANNEL_2GHZ,
+					    &rd5GHz)) {
+		DPRINTF(ah->ah_sc, ATH_DBG_REGULATORY,
+			"%s: couldn't find unitary "
+			"5GHz reg domain for country %u\n",
+			__func__, ah->ah_countryCode);
+		return false;
+	}
+	if (!ath9k_regd_get_wmode_regdomain(ah,
+					    regdmn,
+					    CHANNEL_2GHZ,
+					    &rd2GHz)) {
+		DPRINTF(ah->ah_sc, ATH_DBG_REGULATORY,
+			"%s: couldn't find unitary 2GHz "
+			"reg domain for country %u\n",
+			__func__, ah->ah_countryCode);
+		return false;
+	}
+
+	if (!isWwrSKU(ah) && ((rd5GHz.regDmnEnum == FCC1) ||
+			      (rd5GHz.regDmnEnum == FCC2))) {
+		if (ath9k_regd_is_fcc_midband_supported(ah)) {
+			if (!ath9k_regd_get_wmode_regdomain(ah,
+							    FCC3_FCCA,
+							    ~CHANNEL_2GHZ,
+							    &rd5GHz)) {
+				DPRINTF(ah->ah_sc, ATH_DBG_REGULATORY,
+					"%s: couldn't find unitary 5GHz "
+					"reg domain for country %u\n",
+					__func__, ah->ah_countryCode);
+				return false;
+			}
+		}
+	}
+
+	if (country == NULL) {
+		modes_avail = ah->ah_caps.wireless_modes;
+	} else {
+		ath9k_regd_get_wmodes_nreg(ah, country, &rd5GHz, modes_allowed);
+		modes_avail = modes_allowed;
+
+		if (!enableOutdoor)
+			maxChan = country->outdoorChanStart;
+	}
+
+	next = 0;
+
+	if (maxchans > ARRAY_SIZE(ah->ah_channels))
+		maxchans = ARRAY_SIZE(ah->ah_channels);
+
+	for (cm = modes; cm < &modes[ARRAY_SIZE(modes)]; cm++) {
+		u16 c, c_hi, c_lo;
+		u64 *channelBM = NULL;
+		struct regDomain *rd = NULL;
+		struct RegDmnFreqBand *fband = NULL, *freqs;
+		int8_t low_adj = 0, hi_adj = 0;
+
+		if (!test_bit(cm->mode, modes_avail)) {
+			DPRINTF(ah->ah_sc, ATH_DBG_REGULATORY,
+				"%s: !avail mode %d flags 0x%x\n",
+				__func__, cm->mode, cm->flags);
+			continue;
+		}
+		if (!ath9k_get_channel_edges(ah, cm->flags, &c_lo, &c_hi)) {
+			DPRINTF(ah->ah_sc, ATH_DBG_REGULATORY,
+				"%s: channels 0x%x not supported "
+				"by hardware\n",
+				__func__, cm->flags);
+			continue;
+		}
+
+		switch (cm->mode) {
+		case ATH9K_MODE_11A:
+		case ATH9K_MODE_11NA_HT20:
+		case ATH9K_MODE_11NA_HT40PLUS:
+		case ATH9K_MODE_11NA_HT40MINUS:
+			rd = &rd5GHz;
+			channelBM = rd->chan11a;
+			freqs = &regDmn5GhzFreq[0];
+			ctl = rd->conformanceTestLimit;
+			break;
+		case ATH9K_MODE_11B:
+			rd = &rd2GHz;
+			channelBM = rd->chan11b;
+			freqs = &regDmn2GhzFreq[0];
+			ctl = rd->conformanceTestLimit | CTL_11B;
+			break;
+		case ATH9K_MODE_11G:
+		case ATH9K_MODE_11NG_HT20:
+		case ATH9K_MODE_11NG_HT40PLUS:
+		case ATH9K_MODE_11NG_HT40MINUS:
+			rd = &rd2GHz;
+			channelBM = rd->chan11g;
+			freqs = &regDmn2Ghz11gFreq[0];
+			ctl = rd->conformanceTestLimit | CTL_11G;
+			break;
+		default:
+			DPRINTF(ah->ah_sc, ATH_DBG_REGULATORY,
+				"%s: Unknown HAL mode 0x%x\n", __func__,
+				cm->mode);
+			continue;
+		}
+
+		if (ath9k_regd_is_chan_bm_zero(channelBM))
+			continue;
+
+		if ((cm->mode == ATH9K_MODE_11NA_HT40PLUS) ||
+		    (cm->mode == ATH9K_MODE_11NG_HT40PLUS)) {
+			hi_adj = -20;
+		}
+
+		if ((cm->mode == ATH9K_MODE_11NA_HT40MINUS) ||
+		    (cm->mode == ATH9K_MODE_11NG_HT40MINUS)) {
+			low_adj = 20;
+		}
+
+		/* XXX: Add a helper here instead */
+		for (b = 0; b < 64 * BMLEN; b++) {
+			if (ath9k_regd_is_bit_set(b, channelBM)) {
+				fband = &freqs[b];
+				if (rd5GHz.regDmnEnum == MKK1
+				    || rd5GHz.regDmnEnum == MKK2) {
+					if (ath9k_regd_japan_check(ah,
+								   b,
+								   &rd5GHz))
+						continue;
+				}
+
+				ath9k_regd_add_reg_classid(regclassids,
+							   maxregids,
+							   nregids,
+							   fband->
+							   regClassId);
+
+				if (IS_HT40_MODE(cm->mode) && (rd == &rd5GHz)) {
+					chanSep = 40;
+					if (fband->lowChannel == 5280)
+						low_adj += 20;
+
+					if (fband->lowChannel == 5170)
+						continue;
+				} else
+					chanSep = fband->channelSep;
+
+				for (c = fband->lowChannel + low_adj;
+				     ((c <= (fband->highChannel + hi_adj)) &&
+				      (c >= (fband->lowChannel + low_adj)));
+				     c += chanSep) {
+					if (next >= maxchans) {
+						DPRINTF(ah->ah_sc,
+							ATH_DBG_REGULATORY,
+							"%s: too many channels "
+							"for channel table\n",
+							__func__);
+						goto done;
+					}
+					if (ath9k_regd_add_channel(ah,
+						   c, c_lo, c_hi,
+						   maxChan, ctl,
+						   next,
+						   rd5GHz,
+						   fband, rd, cm,
+						   ichans,
+						   enableExtendedChannels))
+						next++;
+				}
+				if (IS_HT40_MODE(cm->mode) &&
+				    (fband->lowChannel == 5280)) {
+					low_adj -= 20;
+				}
+			}
+		}
+	}
+done:
+	if (next != 0) {
+		int i;
+
+		if (next > ARRAY_SIZE(ah->ah_channels)) {
+			DPRINTF(ah->ah_sc, ATH_DBG_REGULATORY,
+				"%s: too many channels %u; truncating to %u\n",
+				__func__, next,
+				(int) ARRAY_SIZE(ah->ah_channels));
+			next = ARRAY_SIZE(ah->ah_channels);
+		}
+#ifdef ATH_NF_PER_CHAN
+		ath9k_regd_init_rf_buffer(ichans, next);
+#endif
+		ath9k_regd_sort(ichans, next,
+				sizeof(struct ath9k_channel),
+				ath9k_regd_chansort);
+
+		ah->ah_nchan = next;
+
+		DPRINTF(ah->ah_sc, ATH_DBG_REGULATORY, "Channel list:\n");
+		for (i = 0; i < next; i++) {
+			DPRINTF(ah->ah_sc, ATH_DBG_REGULATORY,
+				"chan: %d flags: 0x%x\n",
+				ah->ah_channels[i].channel,
+				ah->ah_channels[i].channelFlags);
+		}
+	}
+	*nchans = next;
+
+	ah->ah_countryCode = ah->ah_countryCode;
+
+	ah->ah_currentRDInUse = regdmn;
+	ah->ah_currentRD5G = rd5GHz.regDmnEnum;
+	ah->ah_currentRD2G = rd2GHz.regDmnEnum;
+	if (country == NULL) {
+		ah->ah_iso[0] = 0;
+		ah->ah_iso[1] = 0;
+	} else {
+		ah->ah_iso[0] = country->isoName[0];
+		ah->ah_iso[1] = country->isoName[1];
+	}
+
+	return next != 0;
+}
+
+struct ath9k_channel*
+ath9k_regd_check_channel(struct ath_hal *ah,
+			 const struct ath9k_channel *c)
+{
+	struct ath9k_channel *base, *cc;
+
+	int flags = c->channelFlags & CHAN_FLAGS;
+	int n, lim;
+
+	DPRINTF(ah->ah_sc, ATH_DBG_REGULATORY,
+		"%s: channel %u/0x%x (0x%x) requested\n", __func__,
+		c->channel, c->channelFlags, flags);
+
+	cc = ah->ah_curchan;
+	if (cc != NULL && cc->channel == c->channel &&
+	    (cc->channelFlags & CHAN_FLAGS) == flags) {
+		if ((cc->privFlags & CHANNEL_INTERFERENCE) &&
+		    (cc->privFlags & CHANNEL_DFS))
+			return NULL;
+		else
+			return cc;
+	}
+
+	base = ah->ah_channels;
+	n = ah->ah_nchan;
+
+	for (lim = n; lim != 0; lim >>= 1) {
+		int d;
+		cc = &base[lim >> 1];
+		d = c->channel - cc->channel;
+		if (d == 0) {
+			if ((cc->channelFlags & CHAN_FLAGS) == flags) {
+				if ((cc->privFlags & CHANNEL_INTERFERENCE) &&
+				    (cc->privFlags & CHANNEL_DFS))
+					return NULL;
+				else
+					return cc;
+			}
+			d = flags - (cc->channelFlags & CHAN_FLAGS);
+		}
+		DPRINTF(ah->ah_sc, ATH_DBG_REGULATORY,
+			"%s: channel %u/0x%x d %d\n", __func__,
+			cc->channel, cc->channelFlags, d);
+		if (d > 0) {
+			base = cc + 1;
+			lim--;
+		}
+	}
+	DPRINTF(ah->ah_sc, ATH_DBG_REGULATORY, "%s: no match for %u/0x%x\n",
+		__func__, c->channel, c->channelFlags);
+	return NULL;
+}
+
+u32
+ath9k_regd_get_antenna_allowed(struct ath_hal *ah,
+			       struct ath9k_channel *chan)
+{
+	struct ath9k_channel *ichan = NULL;
+
+	ichan = ath9k_regd_check_channel(ah, chan);
+	if (!ichan)
+		return 0;
+
+	return ichan->antennaMax;
+}
+
+u32 ath9k_regd_get_ctl(struct ath_hal *ah, struct ath9k_channel *chan)
+{
+	u32 ctl = NO_CTL;
+	struct ath9k_channel *ichan;
+
+	if (ah->ah_countryCode == CTRY_DEFAULT && isWwrSKU(ah)) {
+		if (IS_CHAN_B(chan))
+			ctl = SD_NO_CTL | CTL_11B;
+		else if (IS_CHAN_G(chan))
+			ctl = SD_NO_CTL | CTL_11G;
+		else
+			ctl = SD_NO_CTL | CTL_11A;
+	} else {
+		ichan = ath9k_regd_check_channel(ah, chan);
+		if (ichan != NULL) {
+			/* FIXME */
+			if (IS_CHAN_A(ichan))
+				ctl = ichan->conformanceTestLimit[0];
+			else if (IS_CHAN_B(ichan))
+				ctl = ichan->conformanceTestLimit[1];
+			else if (IS_CHAN_G(ichan))
+				ctl = ichan->conformanceTestLimit[2];
+
+			if (IS_CHAN_G(chan) && (ctl & 0xf) == CTL_11B)
+				ctl = (ctl & ~0xf) | CTL_11G;
+		}
+	}
+	return ctl;
+}
+
+void ath9k_regd_get_current_country(struct ath_hal *ah,
+				    struct ath9k_country_entry *ctry)
+{
+	u16 rd = ath9k_regd_get_eepromRD(ah);
+
+	ctry->isMultidomain = false;
+	if (rd == CTRY_DEFAULT)
+		ctry->isMultidomain = true;
+	else if (!(rd & COUNTRY_ERD_FLAG))
+		ctry->isMultidomain = isWwrSKU(ah);
+
+	ctry->countryCode = ah->ah_countryCode;
+	ctry->regDmnEnum = ah->ah_currentRD;
+	ctry->regDmn5G = ah->ah_currentRD5G;
+	ctry->regDmn2G = ah->ah_currentRD2G;
+	ctry->iso[0] = ah->ah_iso[0];
+	ctry->iso[1] = ah->ah_iso[1];
+	ctry->iso[2] = ah->ah_iso[2];
+}
diff --git a/drivers/net/wireless/ath9k/regd.h b/drivers/net/wireless/ath9k/regd.h
new file mode 100644
index 000000000000..0ecd344fbd98
--- /dev/null
+++ b/drivers/net/wireless/ath9k/regd.h
@@ -0,0 +1,412 @@
+/*
+ * Copyright (c) 2008 Atheros Communications Inc.
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#ifndef REGD_H
+#define REGD_H
+
+#include "ath9k.h"
+
+#define BMLEN 2
+#define BMZERO {(u64) 0, (u64) 0}
+
+#define BM(_fa, _fb, _fc, _fd, _fe, _ff, _fg, _fh, _fi, _fj, _fk, _fl) \
+	{((((_fa >= 0) && (_fa < 64)) ? \
+		(((u64) 1) << _fa) : (u64) 0) | \
+	(((_fb >= 0) && (_fb < 64)) ? \
+		(((u64) 1) << _fb) : (u64) 0) | \
+	(((_fc >= 0) && (_fc < 64)) ? \
+		(((u64) 1) << _fc) : (u64) 0) | \
+	(((_fd >= 0) && (_fd < 64)) ? \
+		(((u64) 1) << _fd) : (u64) 0) | \
+	(((_fe >= 0) && (_fe < 64)) ? \
+		(((u64) 1) << _fe) : (u64) 0) | \
+	(((_ff >= 0) && (_ff < 64)) ? \
+		(((u64) 1) << _ff) : (u64) 0) | \
+	(((_fg >= 0) && (_fg < 64)) ? \
+		(((u64) 1) << _fg) : (u64) 0) | \
+	(((_fh >= 0) && (_fh < 64)) ? \
+		(((u64) 1) << _fh) : (u64) 0) | \
+	(((_fi >= 0) && (_fi < 64)) ? \
+		(((u64) 1) << _fi) : (u64) 0) | \
+	(((_fj >= 0) && (_fj < 64)) ? \
+		(((u64) 1) << _fj) : (u64) 0) | \
+	(((_fk >= 0) && (_fk < 64)) ? \
+		(((u64) 1) << _fk) : (u64) 0) | \
+	(((_fl >= 0) && (_fl < 64)) ? \
+		(((u64) 1) << _fl) : (u64) 0) | \
+			((((_fa > 63) && (_fa < 128)) ? \
+			(((u64) 1) << (_fa - 64)) : (u64) 0) | \
+	(((_fb > 63) && (_fb < 128)) ? \
+		(((u64) 1) << (_fb - 64)) : (u64) 0) | \
+	(((_fc > 63) && (_fc < 128)) ? \
+		(((u64) 1) << (_fc - 64)) : (u64) 0) | \
+	(((_fd > 63) && (_fd < 128)) ? \
+		(((u64) 1) << (_fd - 64)) : (u64) 0) | \
+	(((_fe > 63) && (_fe < 128)) ? \
+		(((u64) 1) << (_fe - 64)) : (u64) 0) | \
+	(((_ff > 63) && (_ff < 128)) ? \
+		(((u64) 1) << (_ff - 64)) : (u64) 0) | \
+	(((_fg > 63) && (_fg < 128)) ? \
+		(((u64) 1) << (_fg - 64)) : (u64) 0) | \
+	(((_fh > 63) && (_fh < 128)) ? \
+		(((u64) 1) << (_fh - 64)) : (u64) 0) | \
+	(((_fi > 63) && (_fi < 128)) ? \
+		(((u64) 1) << (_fi - 64)) : (u64) 0) | \
+	(((_fj > 63) && (_fj < 128)) ? \
+		(((u64) 1) << (_fj - 64)) : (u64) 0) | \
+	(((_fk > 63) && (_fk < 128)) ? \
+		(((u64) 1) << (_fk - 64)) : (u64) 0) | \
+	(((_fl > 63) && (_fl < 128)) ? \
+		(((u64) 1) << (_fl - 64)) : (u64) 0)))}
+
+#define DEF_REGDMN      FCC1_FCCA
+#define DEF_DMN_5       FCC1
+#define DEF_DMN_2       FCCA
+#define COUNTRY_ERD_FLAG        0x8000
+#define WORLDWIDE_ROAMING_FLAG  0x4000
+#define SUPER_DOMAIN_MASK   0x0fff
+#define COUNTRY_CODE_MASK   0x3fff
+#define CF_INTERFERENCE     (CHANNEL_CW_INT | CHANNEL_RADAR_INT)
+#define CHANNEL_14      (2484)
+#define IS_11G_CH14(_ch,_cf) \
+    (((_ch) == CHANNEL_14) && ((_cf) == CHANNEL_G))
+
+#define NO_PSCAN    0x0ULL
+#define PSCAN_FCC   0x0000000000000001ULL
+#define PSCAN_FCC_T 0x0000000000000002ULL
+#define PSCAN_ETSI  0x0000000000000004ULL
+#define PSCAN_MKK1  0x0000000000000008ULL
+#define PSCAN_MKK2  0x0000000000000010ULL
+#define PSCAN_MKKA  0x0000000000000020ULL
+#define PSCAN_MKKA_G    0x0000000000000040ULL
+#define PSCAN_ETSIA 0x0000000000000080ULL
+#define PSCAN_ETSIB 0x0000000000000100ULL
+#define PSCAN_ETSIC 0x0000000000000200ULL
+#define PSCAN_WWR   0x0000000000000400ULL
+#define PSCAN_MKKA1 0x0000000000000800ULL
+#define PSCAN_MKKA1_G   0x0000000000001000ULL
+#define PSCAN_MKKA2 0x0000000000002000ULL
+#define PSCAN_MKKA2_G   0x0000000000004000ULL
+#define PSCAN_MKK3  0x0000000000008000ULL
+#define PSCAN_DEFER 0x7FFFFFFFFFFFFFFFULL
+#define IS_ECM_CHAN 0x8000000000000000ULL
+
+#define isWwrSKU(_ah) \
+	(((ath9k_regd_get_eepromRD((_ah)) & WORLD_SKU_MASK) == \
+		WORLD_SKU_PREFIX) || \
+		(ath9k_regd_get_eepromRD(_ah) == WORLD))
+
+#define isWwrSKU_NoMidband(_ah) \
+	((ath9k_regd_get_eepromRD((_ah)) == WOR3_WORLD) || \
+	(ath9k_regd_get_eepromRD(_ah) == WOR4_WORLD) || \
+	(ath9k_regd_get_eepromRD(_ah) == WOR5_ETSIC))
+
+#define isUNII1OddChan(ch) \
+	((ch == 5170) || (ch == 5190) || (ch == 5210) || (ch == 5230))
+
+#define IS_HT40_MODE(_mode)					\
+	(((_mode == ATH9K_MODE_11NA_HT40PLUS  ||		\
+	   _mode == ATH9K_MODE_11NG_HT40PLUS    ||		\
+	   _mode == ATH9K_MODE_11NA_HT40MINUS   ||		\
+	   _mode == ATH9K_MODE_11NG_HT40MINUS) ? true : false))
+
+#define CHAN_FLAGS      (CHANNEL_ALL|CHANNEL_HALF|CHANNEL_QUARTER)
+
+#define swap(_a, _b, _size) {                   \
+	u8 *s = _b;                       \
+	int i = _size;                          \
+	do {                                    \
+		u8 tmp = *_a;             \
+		*_a++ = *s;                     \
+		*s++ = tmp;                     \
+	} while (--i);                          \
+	_a -= _size;                            \
+}
+
+
+#define HALF_MAXCHANBW          10
+
+#define MULTI_DOMAIN_MASK 0xFF00
+
+#define WORLD_SKU_MASK          0x00F0
+#define WORLD_SKU_PREFIX        0x0060
+
+#define CHANNEL_HALF_BW         10
+#define CHANNEL_QUARTER_BW      5
+
+typedef int ath_hal_cmp_t(const void *, const void *);
+
+struct reg_dmn_pair_mapping {
+	u16 regDmnEnum;
+	u16 regDmn5GHz;
+	u16 regDmn2GHz;
+	u32 flags5GHz;
+	u32 flags2GHz;
+	u64 pscanMask;
+	u16 singleCC;
+};
+
+struct ccmap {
+	char isoName[3];
+	u16 countryCode;
+};
+
+struct country_code_to_enum_rd {
+	u16 countryCode;
+	u16 regDmnEnum;
+	const char *isoName;
+	const char *name;
+	bool allow11g;
+	bool allow11aTurbo;
+	bool allow11gTurbo;
+	bool allow11ng20;
+	bool allow11ng40;
+	bool allow11na20;
+	bool allow11na40;
+	u16 outdoorChanStart;
+};
+
+struct RegDmnFreqBand {
+	u16 lowChannel;
+	u16 highChannel;
+	u8 powerDfs;
+	u8 antennaMax;
+	u8 channelBW;
+	u8 channelSep;
+	u64 useDfs;
+	u64 usePassScan;
+	u8 regClassId;
+};
+
+struct regDomain {
+	u16 regDmnEnum;
+	u8 conformanceTestLimit;
+	u64 dfsMask;
+	u64 pscan;
+	u32 flags;
+	u64 chan11a[BMLEN];
+	u64 chan11a_turbo[BMLEN];
+	u64 chan11a_dyn_turbo[BMLEN];
+	u64 chan11b[BMLEN];
+	u64 chan11g[BMLEN];
+	u64 chan11g_turbo[BMLEN];
+};
+
+struct cmode {
+	u32 mode;
+	u32 flags;
+};
+
+#define YES true
+#define NO  false
+
+struct japan_bandcheck {
+	u16 freqbandbit;
+	u32 eepromflagtocheck;
+};
+
+struct common_mode_power {
+	u16 lchan;
+	u16 hchan;
+	u8 pwrlvl;
+};
+
+enum CountryCode {
+	CTRY_ALBANIA = 8,
+	CTRY_ALGERIA = 12,
+	CTRY_ARGENTINA = 32,
+	CTRY_ARMENIA = 51,
+	CTRY_AUSTRALIA = 36,
+	CTRY_AUSTRIA = 40,
+	CTRY_AZERBAIJAN = 31,
+	CTRY_BAHRAIN = 48,
+	CTRY_BELARUS = 112,
+	CTRY_BELGIUM = 56,
+	CTRY_BELIZE = 84,
+	CTRY_BOLIVIA = 68,
+	CTRY_BOSNIA_HERZ = 70,
+	CTRY_BRAZIL = 76,
+	CTRY_BRUNEI_DARUSSALAM = 96,
+	CTRY_BULGARIA = 100,
+	CTRY_CANADA = 124,
+	CTRY_CHILE = 152,
+	CTRY_CHINA = 156,
+	CTRY_COLOMBIA = 170,
+	CTRY_COSTA_RICA = 188,
+	CTRY_CROATIA = 191,
+	CTRY_CYPRUS = 196,
+	CTRY_CZECH = 203,
+	CTRY_DENMARK = 208,
+	CTRY_DOMINICAN_REPUBLIC = 214,
+	CTRY_ECUADOR = 218,
+	CTRY_EGYPT = 818,
+	CTRY_EL_SALVADOR = 222,
+	CTRY_ESTONIA = 233,
+	CTRY_FAEROE_ISLANDS = 234,
+	CTRY_FINLAND = 246,
+	CTRY_FRANCE = 250,
+	CTRY_GEORGIA = 268,
+	CTRY_GERMANY = 276,
+	CTRY_GREECE = 300,
+	CTRY_GUATEMALA = 320,
+	CTRY_HONDURAS = 340,
+	CTRY_HONG_KONG = 344,
+	CTRY_HUNGARY = 348,
+	CTRY_ICELAND = 352,
+	CTRY_INDIA = 356,
+	CTRY_INDONESIA = 360,
+	CTRY_IRAN = 364,
+	CTRY_IRAQ = 368,
+	CTRY_IRELAND = 372,
+	CTRY_ISRAEL = 376,
+	CTRY_ITALY = 380,
+	CTRY_JAMAICA = 388,
+	CTRY_JAPAN = 392,
+	CTRY_JORDAN = 400,
+	CTRY_KAZAKHSTAN = 398,
+	CTRY_KENYA = 404,
+	CTRY_KOREA_NORTH = 408,
+	CTRY_KOREA_ROC = 410,
+	CTRY_KOREA_ROC2 = 411,
+	CTRY_KOREA_ROC3 = 412,
+	CTRY_KUWAIT = 414,
+	CTRY_LATVIA = 428,
+	CTRY_LEBANON = 422,
+	CTRY_LIBYA = 434,
+	CTRY_LIECHTENSTEIN = 438,
+	CTRY_LITHUANIA = 440,
+	CTRY_LUXEMBOURG = 442,
+	CTRY_MACAU = 446,
+	CTRY_MACEDONIA = 807,
+	CTRY_MALAYSIA = 458,
+	CTRY_MALTA = 470,
+	CTRY_MEXICO = 484,
+	CTRY_MONACO = 492,
+	CTRY_MOROCCO = 504,
+	CTRY_NEPAL = 524,
+	CTRY_NETHERLANDS = 528,
+	CTRY_NETHERLANDS_ANTILLES = 530,
+	CTRY_NEW_ZEALAND = 554,
+	CTRY_NICARAGUA = 558,
+	CTRY_NORWAY = 578,
+	CTRY_OMAN = 512,
+	CTRY_PAKISTAN = 586,
+	CTRY_PANAMA = 591,
+	CTRY_PAPUA_NEW_GUINEA = 598,
+	CTRY_PARAGUAY = 600,
+	CTRY_PERU = 604,
+	CTRY_PHILIPPINES = 608,
+	CTRY_POLAND = 616,
+	CTRY_PORTUGAL = 620,
+	CTRY_PUERTO_RICO = 630,
+	CTRY_QATAR = 634,
+	CTRY_ROMANIA = 642,
+	CTRY_RUSSIA = 643,
+	CTRY_SAUDI_ARABIA = 682,
+	CTRY_SERBIA_MONTENEGRO = 891,
+	CTRY_SINGAPORE = 702,
+	CTRY_SLOVAKIA = 703,
+	CTRY_SLOVENIA = 705,
+	CTRY_SOUTH_AFRICA = 710,
+	CTRY_SPAIN = 724,
+	CTRY_SRI_LANKA = 144,
+	CTRY_SWEDEN = 752,
+	CTRY_SWITZERLAND = 756,
+	CTRY_SYRIA = 760,
+	CTRY_TAIWAN = 158,
+	CTRY_THAILAND = 764,
+	CTRY_TRINIDAD_Y_TOBAGO = 780,
+	CTRY_TUNISIA = 788,
+	CTRY_TURKEY = 792,
+	CTRY_UAE = 784,
+	CTRY_UKRAINE = 804,
+	CTRY_UNITED_KINGDOM = 826,
+	CTRY_UNITED_STATES = 840,
+	CTRY_UNITED_STATES_FCC49 = 842,
+	CTRY_URUGUAY = 858,
+	CTRY_UZBEKISTAN = 860,
+	CTRY_VENEZUELA = 862,
+	CTRY_VIET_NAM = 704,
+	CTRY_YEMEN = 887,
+	CTRY_ZIMBABWE = 716,
+	CTRY_JAPAN1 = 393,
+	CTRY_JAPAN2 = 394,
+	CTRY_JAPAN3 = 395,
+	CTRY_JAPAN4 = 396,
+	CTRY_JAPAN5 = 397,
+	CTRY_JAPAN6 = 4006,
+	CTRY_JAPAN7 = 4007,
+	CTRY_JAPAN8 = 4008,
+	CTRY_JAPAN9 = 4009,
+	CTRY_JAPAN10 = 4010,
+	CTRY_JAPAN11 = 4011,
+	CTRY_JAPAN12 = 4012,
+	CTRY_JAPAN13 = 4013,
+	CTRY_JAPAN14 = 4014,
+	CTRY_JAPAN15 = 4015,
+	CTRY_JAPAN16 = 4016,
+	CTRY_JAPAN17 = 4017,
+	CTRY_JAPAN18 = 4018,
+	CTRY_JAPAN19 = 4019,
+	CTRY_JAPAN20 = 4020,
+	CTRY_JAPAN21 = 4021,
+	CTRY_JAPAN22 = 4022,
+	CTRY_JAPAN23 = 4023,
+	CTRY_JAPAN24 = 4024,
+	CTRY_JAPAN25 = 4025,
+	CTRY_JAPAN26 = 4026,
+	CTRY_JAPAN27 = 4027,
+	CTRY_JAPAN28 = 4028,
+	CTRY_JAPAN29 = 4029,
+	CTRY_JAPAN30 = 4030,
+	CTRY_JAPAN31 = 4031,
+	CTRY_JAPAN32 = 4032,
+	CTRY_JAPAN33 = 4033,
+	CTRY_JAPAN34 = 4034,
+	CTRY_JAPAN35 = 4035,
+	CTRY_JAPAN36 = 4036,
+	CTRY_JAPAN37 = 4037,
+	CTRY_JAPAN38 = 4038,
+	CTRY_JAPAN39 = 4039,
+	CTRY_JAPAN40 = 4040,
+	CTRY_JAPAN41 = 4041,
+	CTRY_JAPAN42 = 4042,
+	CTRY_JAPAN43 = 4043,
+	CTRY_JAPAN44 = 4044,
+	CTRY_JAPAN45 = 4045,
+	CTRY_JAPAN46 = 4046,
+	CTRY_JAPAN47 = 4047,
+	CTRY_JAPAN48 = 4048,
+	CTRY_JAPAN49 = 4049,
+	CTRY_JAPAN50 = 4050,
+	CTRY_JAPAN51 = 4051,
+	CTRY_JAPAN52 = 4052,
+	CTRY_JAPAN53 = 4053,
+	CTRY_JAPAN54 = 4054,
+	CTRY_JAPAN55 = 4055,
+	CTRY_JAPAN56 = 4056,
+	CTRY_JAPAN57 = 4057,
+	CTRY_JAPAN58 = 4058,
+	CTRY_JAPAN59 = 4059,
+	CTRY_AUSTRALIA2 = 5000,
+	CTRY_CANADA2 = 5001,
+	CTRY_BELGIUM2 = 5002
+};
+
+void ath9k_regd_get_current_country(struct ath_hal *ah,
+				    struct ath9k_country_entry *ctry);
+
+#endif
diff --git a/drivers/net/wireless/ath9k/regd_common.h b/drivers/net/wireless/ath9k/regd_common.h
new file mode 100644
index 000000000000..9112c030b1e8
--- /dev/null
+++ b/drivers/net/wireless/ath9k/regd_common.h
@@ -0,0 +1,1915 @@
+/*
+ * Copyright (c) 2008 Atheros Communications Inc.
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#ifndef REGD_COMMON_H
+#define REGD_COMMON_H
+
+enum EnumRd {
+	NO_ENUMRD = 0x00,
+	NULL1_WORLD = 0x03,
+	NULL1_ETSIB = 0x07,
+	NULL1_ETSIC = 0x08,
+	FCC1_FCCA = 0x10,
+	FCC1_WORLD = 0x11,
+	FCC4_FCCA = 0x12,
+	FCC5_FCCA = 0x13,
+	FCC6_FCCA = 0x14,
+
+	FCC2_FCCA = 0x20,
+	FCC2_WORLD = 0x21,
+	FCC2_ETSIC = 0x22,
+	FCC6_WORLD = 0x23,
+	FRANCE_RES = 0x31,
+	FCC3_FCCA = 0x3A,
+	FCC3_WORLD = 0x3B,
+
+	ETSI1_WORLD = 0x37,
+	ETSI3_ETSIA = 0x32,
+	ETSI2_WORLD = 0x35,
+	ETSI3_WORLD = 0x36,
+	ETSI4_WORLD = 0x30,
+	ETSI4_ETSIC = 0x38,
+	ETSI5_WORLD = 0x39,
+	ETSI6_WORLD = 0x34,
+	ETSI_RESERVED = 0x33,
+
+	MKK1_MKKA = 0x40,
+	MKK1_MKKB = 0x41,
+	APL4_WORLD = 0x42,
+	MKK2_MKKA = 0x43,
+	APL_RESERVED = 0x44,
+	APL2_WORLD = 0x45,
+	APL2_APLC = 0x46,
+	APL3_WORLD = 0x47,
+	MKK1_FCCA = 0x48,
+	APL2_APLD = 0x49,
+	MKK1_MKKA1 = 0x4A,
+	MKK1_MKKA2 = 0x4B,
+	MKK1_MKKC = 0x4C,
+
+	APL3_FCCA = 0x50,
+	APL1_WORLD = 0x52,
+	APL1_FCCA = 0x53,
+	APL1_APLA = 0x54,
+	APL1_ETSIC = 0x55,
+	APL2_ETSIC = 0x56,
+	APL5_WORLD = 0x58,
+	APL6_WORLD = 0x5B,
+	APL7_FCCA = 0x5C,
+	APL8_WORLD = 0x5D,
+	APL9_WORLD = 0x5E,
+
+	WOR0_WORLD = 0x60,
+	WOR1_WORLD = 0x61,
+	WOR2_WORLD = 0x62,
+	WOR3_WORLD = 0x63,
+	WOR4_WORLD = 0x64,
+	WOR5_ETSIC = 0x65,
+
+	WOR01_WORLD = 0x66,
+	WOR02_WORLD = 0x67,
+	EU1_WORLD = 0x68,
+
+	WOR9_WORLD = 0x69,
+	WORA_WORLD = 0x6A,
+	WORB_WORLD = 0x6B,
+
+	MKK3_MKKB = 0x80,
+	MKK3_MKKA2 = 0x81,
+	MKK3_MKKC = 0x82,
+
+	MKK4_MKKB = 0x83,
+	MKK4_MKKA2 = 0x84,
+	MKK4_MKKC = 0x85,
+
+	MKK5_MKKB = 0x86,
+	MKK5_MKKA2 = 0x87,
+	MKK5_MKKC = 0x88,
+
+	MKK6_MKKB = 0x89,
+	MKK6_MKKA2 = 0x8A,
+	MKK6_MKKC = 0x8B,
+
+	MKK7_MKKB = 0x8C,
+	MKK7_MKKA2 = 0x8D,
+	MKK7_MKKC = 0x8E,
+
+	MKK8_MKKB = 0x8F,
+	MKK8_MKKA2 = 0x90,
+	MKK8_MKKC = 0x91,
+
+	MKK14_MKKA1 = 0x92,
+	MKK15_MKKA1 = 0x93,
+
+	MKK10_FCCA = 0xD0,
+	MKK10_MKKA1 = 0xD1,
+	MKK10_MKKC = 0xD2,
+	MKK10_MKKA2 = 0xD3,
+
+	MKK11_MKKA = 0xD4,
+	MKK11_FCCA = 0xD5,
+	MKK11_MKKA1 = 0xD6,
+	MKK11_MKKC = 0xD7,
+	MKK11_MKKA2 = 0xD8,
+
+	MKK12_MKKA = 0xD9,
+	MKK12_FCCA = 0xDA,
+	MKK12_MKKA1 = 0xDB,
+	MKK12_MKKC = 0xDC,
+	MKK12_MKKA2 = 0xDD,
+
+	MKK13_MKKB = 0xDE,
+
+	MKK3_MKKA = 0xF0,
+	MKK3_MKKA1 = 0xF1,
+	MKK3_FCCA = 0xF2,
+	MKK4_MKKA = 0xF3,
+	MKK4_MKKA1 = 0xF4,
+	MKK4_FCCA = 0xF5,
+	MKK9_MKKA = 0xF6,
+	MKK10_MKKA = 0xF7,
+	MKK6_MKKA1 = 0xF8,
+	MKK6_FCCA = 0xF9,
+	MKK7_MKKA1 = 0xFA,
+	MKK7_FCCA = 0xFB,
+	MKK9_FCCA = 0xFC,
+	MKK9_MKKA1 = 0xFD,
+	MKK9_MKKC = 0xFE,
+	MKK9_MKKA2 = 0xFF,
+
+	APL1 = 0x0150,
+	APL2 = 0x0250,
+	APL3 = 0x0350,
+	APL4 = 0x0450,
+	APL5 = 0x0550,
+	APL6 = 0x0650,
+	APL7 = 0x0750,
+	APL8 = 0x0850,
+	APL9 = 0x0950,
+	APL10 = 0x1050,
+
+	ETSI1 = 0x0130,
+	ETSI2 = 0x0230,
+	ETSI3 = 0x0330,
+	ETSI4 = 0x0430,
+	ETSI5 = 0x0530,
+	ETSI6 = 0x0630,
+	ETSIA = 0x0A30,
+	ETSIB = 0x0B30,
+	ETSIC = 0x0C30,
+
+	FCC1 = 0x0110,
+	FCC2 = 0x0120,
+	FCC3 = 0x0160,
+	FCC4 = 0x0165,
+	FCC5 = 0x0510,
+	FCC6 = 0x0610,
+	FCCA = 0x0A10,
+
+	APLD = 0x0D50,
+
+	MKK1 = 0x0140,
+	MKK2 = 0x0240,
+	MKK3 = 0x0340,
+	MKK4 = 0x0440,
+	MKK5 = 0x0540,
+	MKK6 = 0x0640,
+	MKK7 = 0x0740,
+	MKK8 = 0x0840,
+	MKK9 = 0x0940,
+	MKK10 = 0x0B40,
+	MKK11 = 0x1140,
+	MKK12 = 0x1240,
+	MKK13 = 0x0C40,
+	MKK14 = 0x1440,
+	MKK15 = 0x1540,
+	MKKA = 0x0A40,
+	MKKC = 0x0A50,
+
+	NULL1 = 0x0198,
+	WORLD = 0x0199,
+	DEBUG_REG_DMN = 0x01ff,
+};
+
+enum {
+	FCC = 0x10,
+	MKK = 0x40,
+	ETSI = 0x30,
+};
+
+enum {
+	NO_REQ = 0x00000000,
+	DISALLOW_ADHOC_11A = 0x00000001,
+	DISALLOW_ADHOC_11A_TURB = 0x00000002,
+	NEED_NFC = 0x00000004,
+
+	ADHOC_PER_11D = 0x00000008,
+	ADHOC_NO_11A = 0x00000010,
+
+	PUBLIC_SAFETY_DOMAIN = 0x00000020,
+	LIMIT_FRAME_4MS = 0x00000040,
+
+	NO_HOSTAP = 0x00000080,
+
+	REQ_MASK = 0x000000FF,
+};
+
+#define REG_DOMAIN_2GHZ_MASK    (REQ_MASK & \
+	(!(ADHOC_NO_11A | DISALLOW_ADHOC_11A | DISALLOW_ADHOC_11A_TURB)))
+#define REG_DOMAIN_5GHZ_MASK    REQ_MASK
+
+static struct reg_dmn_pair_mapping regDomainPairs[] = {
+	{NO_ENUMRD, DEBUG_REG_DMN, DEBUG_REG_DMN, NO_REQ, NO_REQ,
+	 PSCAN_DEFER, 0},
+	{NULL1_WORLD, NULL1, WORLD, NO_REQ, NO_REQ, PSCAN_DEFER, 0},
+	{NULL1_ETSIB, NULL1, ETSIB, NO_REQ, NO_REQ, PSCAN_DEFER, 0},
+	{NULL1_ETSIC, NULL1, ETSIC, NO_REQ, NO_REQ, PSCAN_DEFER, 0},
+
+	{FCC2_FCCA, FCC2, FCCA, NO_REQ, NO_REQ, PSCAN_DEFER, 0},
+	{FCC2_WORLD, FCC2, WORLD, NO_REQ, NO_REQ, PSCAN_DEFER, 0},
+	{FCC2_ETSIC, FCC2, ETSIC, NO_REQ, NO_REQ, PSCAN_DEFER, 0},
+	{FCC3_FCCA, FCC3, FCCA, NO_REQ, NO_REQ, PSCAN_DEFER, 0},
+	{FCC3_WORLD, FCC3, WORLD, NO_REQ, NO_REQ, PSCAN_DEFER, 0},
+	{FCC4_FCCA, FCC4, FCCA,
+	 DISALLOW_ADHOC_11A | DISALLOW_ADHOC_11A_TURB, NO_REQ, PSCAN_DEFER,
+	 0},
+	{FCC5_FCCA, FCC5, FCCA, NO_REQ, NO_REQ, PSCAN_DEFER, 0},
+	{FCC6_FCCA, FCC6, FCCA, NO_REQ, NO_REQ, PSCAN_DEFER, 0},
+	{FCC6_WORLD, FCC6, WORLD, NO_REQ, NO_REQ, PSCAN_DEFER, 0},
+
+	{ETSI1_WORLD, ETSI1, WORLD,
+	 DISALLOW_ADHOC_11A | DISALLOW_ADHOC_11A_TURB, NO_REQ, PSCAN_DEFER,
+	 0},
+	{ETSI2_WORLD, ETSI2, WORLD,
+	 DISALLOW_ADHOC_11A | DISALLOW_ADHOC_11A_TURB, NO_REQ, PSCAN_DEFER,
+	 0},
+	{ETSI3_WORLD, ETSI3, WORLD,
+	 DISALLOW_ADHOC_11A | DISALLOW_ADHOC_11A_TURB, NO_REQ, PSCAN_DEFER,
+	 0},
+	{ETSI4_WORLD, ETSI4, WORLD,
+	 DISALLOW_ADHOC_11A | DISALLOW_ADHOC_11A_TURB, NO_REQ, PSCAN_DEFER,
+	 0},
+	{ETSI5_WORLD, ETSI5, WORLD,
+	 DISALLOW_ADHOC_11A | DISALLOW_ADHOC_11A_TURB, NO_REQ, PSCAN_DEFER,
+	 0},
+	{ETSI6_WORLD, ETSI6, WORLD,
+	 DISALLOW_ADHOC_11A | DISALLOW_ADHOC_11A_TURB, NO_REQ, PSCAN_DEFER,
+	 0},
+
+	{ETSI3_ETSIA, ETSI3, WORLD,
+	 DISALLOW_ADHOC_11A | DISALLOW_ADHOC_11A_TURB, NO_REQ, PSCAN_DEFER,
+	 0},
+	{FRANCE_RES, ETSI3, WORLD, NO_REQ, NO_REQ, PSCAN_DEFER, 0},
+
+	{FCC1_WORLD, FCC1, WORLD, NO_REQ, NO_REQ, PSCAN_DEFER, 0},
+	{FCC1_FCCA, FCC1, FCCA, NO_REQ, NO_REQ, PSCAN_DEFER, 0},
+	{APL1_WORLD, APL1, WORLD, NO_REQ, NO_REQ, PSCAN_DEFER, 0},
+	{APL2_WORLD, APL2, WORLD, NO_REQ, NO_REQ, PSCAN_DEFER, 0},
+	{APL3_WORLD, APL3, WORLD, NO_REQ, NO_REQ, PSCAN_DEFER, 0},
+	{APL4_WORLD, APL4, WORLD, NO_REQ, NO_REQ, PSCAN_DEFER, 0},
+	{APL5_WORLD, APL5, WORLD, NO_REQ, NO_REQ, PSCAN_DEFER, 0},
+	{APL6_WORLD, APL6, WORLD, NO_REQ, NO_REQ, PSCAN_DEFER, 0},
+	{APL8_WORLD, APL8, WORLD, NO_REQ, NO_REQ, PSCAN_DEFER, 0},
+	{APL9_WORLD, APL9, WORLD, NO_REQ, NO_REQ, PSCAN_DEFER, 0},
+
+	{APL3_FCCA, APL3, FCCA, NO_REQ, NO_REQ, PSCAN_DEFER, 0},
+	{APL1_ETSIC, APL1, ETSIC, NO_REQ, NO_REQ, PSCAN_DEFER, 0},
+	{APL2_ETSIC, APL2, ETSIC, NO_REQ, NO_REQ, PSCAN_DEFER, 0},
+	{APL2_APLD, APL2, APLD, NO_REQ, NO_REQ, PSCAN_DEFER,},
+
+	{MKK1_MKKA, MKK1, MKKA,
+	 DISALLOW_ADHOC_11A_TURB | NEED_NFC | LIMIT_FRAME_4MS, NEED_NFC,
+	 PSCAN_MKK1 | PSCAN_MKKA, CTRY_JAPAN},
+	{MKK1_MKKB, MKK1, MKKA,
+	 DISALLOW_ADHOC_11A | DISALLOW_ADHOC_11A_TURB | NEED_NFC |
+	 LIMIT_FRAME_4MS, NEED_NFC, PSCAN_MKK1 | PSCAN_MKKA | PSCAN_MKKA_G,
+	 CTRY_JAPAN1},
+	{MKK1_FCCA, MKK1, FCCA,
+	 DISALLOW_ADHOC_11A_TURB | NEED_NFC | LIMIT_FRAME_4MS, NEED_NFC,
+	 PSCAN_MKK1, CTRY_JAPAN2},
+	{MKK1_MKKA1, MKK1, MKKA,
+	 DISALLOW_ADHOC_11A_TURB | NEED_NFC | LIMIT_FRAME_4MS, NEED_NFC,
+	 PSCAN_MKK1 | PSCAN_MKKA1 | PSCAN_MKKA1_G, CTRY_JAPAN4},
+	{MKK1_MKKA2, MKK1, MKKA,
+	 DISALLOW_ADHOC_11A_TURB | NEED_NFC | LIMIT_FRAME_4MS, NEED_NFC,
+	 PSCAN_MKK1 | PSCAN_MKKA2 | PSCAN_MKKA2_G, CTRY_JAPAN5},
+	{MKK1_MKKC, MKK1, MKKC,
+	 DISALLOW_ADHOC_11A_TURB | NEED_NFC | LIMIT_FRAME_4MS, NEED_NFC,
+	 PSCAN_MKK1, CTRY_JAPAN6},
+
+	{MKK2_MKKA, MKK2, MKKA,
+	 DISALLOW_ADHOC_11A | DISALLOW_ADHOC_11A_TURB | NEED_NFC |
+	 LIMIT_FRAME_4MS, NEED_NFC, PSCAN_MKK2 | PSCAN_MKKA | PSCAN_MKKA_G,
+	 CTRY_JAPAN3},
+
+	{MKK3_MKKA, MKK3, MKKA,
+	 DISALLOW_ADHOC_11A_TURB | NEED_NFC | LIMIT_FRAME_4MS, NEED_NFC,
+	 PSCAN_MKKA, CTRY_JAPAN25},
+	{MKK3_MKKB, MKK3, MKKA,
+	 DISALLOW_ADHOC_11A | DISALLOW_ADHOC_11A_TURB | NEED_NFC |
+	 LIMIT_FRAME_4MS, NEED_NFC, PSCAN_MKKA | PSCAN_MKKA_G,
+	 CTRY_JAPAN7},
+	{MKK3_MKKA1, MKK3, MKKA,
+	 DISALLOW_ADHOC_11A_TURB | NEED_NFC | LIMIT_FRAME_4MS, NEED_NFC,
+	 PSCAN_MKKA1 | PSCAN_MKKA1_G, CTRY_JAPAN26},
+	{MKK3_MKKA2, MKK3, MKKA,
+	 DISALLOW_ADHOC_11A_TURB | NEED_NFC | LIMIT_FRAME_4MS, NEED_NFC,
+	 PSCAN_MKKA2 | PSCAN_MKKA2_G, CTRY_JAPAN8},
+	{MKK3_MKKC, MKK3, MKKC,
+	 DISALLOW_ADHOC_11A_TURB | NEED_NFC | LIMIT_FRAME_4MS, NEED_NFC,
+	 NO_PSCAN, CTRY_JAPAN9},
+	{MKK3_FCCA, MKK3, FCCA,
+	 DISALLOW_ADHOC_11A_TURB | NEED_NFC | LIMIT_FRAME_4MS, NEED_NFC,
+	 NO_PSCAN, CTRY_JAPAN27},
+
+	{MKK4_MKKA, MKK4, MKKA,
+	 DISALLOW_ADHOC_11A_TURB | NEED_NFC | LIMIT_FRAME_4MS, NEED_NFC,
+	 PSCAN_MKK3, CTRY_JAPAN36},
+	{MKK4_MKKB, MKK4, MKKA,
+	 DISALLOW_ADHOC_11A | DISALLOW_ADHOC_11A_TURB | NEED_NFC |
+	 LIMIT_FRAME_4MS, NEED_NFC, PSCAN_MKK3 | PSCAN_MKKA | PSCAN_MKKA_G,
+	 CTRY_JAPAN10},
+	{MKK4_MKKA1, MKK4, MKKA,
+	 DISALLOW_ADHOC_11A_TURB | NEED_NFC | LIMIT_FRAME_4MS, NEED_NFC,
+	 PSCAN_MKK3 | PSCAN_MKKA1 | PSCAN_MKKA1_G, CTRY_JAPAN28},
+	{MKK4_MKKA2, MKK4, MKKA,
+	 DISALLOW_ADHOC_11A_TURB | NEED_NFC | LIMIT_FRAME_4MS, NEED_NFC,
+	 PSCAN_MKK3 | PSCAN_MKKA2 | PSCAN_MKKA2_G, CTRY_JAPAN11},
+	{MKK4_MKKC, MKK4, MKKC,
+	 DISALLOW_ADHOC_11A_TURB | NEED_NFC | LIMIT_FRAME_4MS, NEED_NFC,
+	 PSCAN_MKK3, CTRY_JAPAN12},
+	{MKK4_FCCA, MKK4, FCCA,
+	 DISALLOW_ADHOC_11A_TURB | NEED_NFC | LIMIT_FRAME_4MS, NEED_NFC,
+	 PSCAN_MKK3, CTRY_JAPAN29},
+
+	{MKK5_MKKB, MKK5, MKKA,
+	 DISALLOW_ADHOC_11A | DISALLOW_ADHOC_11A_TURB | NEED_NFC |
+	 LIMIT_FRAME_4MS, NEED_NFC, PSCAN_MKK3 | PSCAN_MKKA | PSCAN_MKKA_G,
+	 CTRY_JAPAN13},
+	{MKK5_MKKA2, MKK5, MKKA,
+	 DISALLOW_ADHOC_11A_TURB | NEED_NFC | LIMIT_FRAME_4MS, NEED_NFC,
+	 PSCAN_MKK3 | PSCAN_MKKA2 | PSCAN_MKKA2_G, CTRY_JAPAN14},
+	{MKK5_MKKC, MKK5, MKKC,
+	 DISALLOW_ADHOC_11A_TURB | NEED_NFC | LIMIT_FRAME_4MS, NEED_NFC,
+	 PSCAN_MKK3, CTRY_JAPAN15},
+
+	{MKK6_MKKB, MKK6, MKKA,
+	 DISALLOW_ADHOC_11A_TURB | NEED_NFC | LIMIT_FRAME_4MS, NEED_NFC,
+	 PSCAN_MKK1 | PSCAN_MKKA | PSCAN_MKKA_G, CTRY_JAPAN16},
+	{MKK6_MKKA1, MKK6, MKKA,
+	 DISALLOW_ADHOC_11A_TURB | NEED_NFC | LIMIT_FRAME_4MS, NEED_NFC,
+	 PSCAN_MKK1 | PSCAN_MKKA1 | PSCAN_MKKA1_G, CTRY_JAPAN30},
+	{MKK6_MKKA2, MKK6, MKKA,
+	 DISALLOW_ADHOC_11A_TURB | NEED_NFC | LIMIT_FRAME_4MS, NEED_NFC,
+	 PSCAN_MKK1 | PSCAN_MKKA2 | PSCAN_MKKA2_G, CTRY_JAPAN17},
+	{MKK6_MKKC, MKK6, MKKC,
+	 DISALLOW_ADHOC_11A_TURB | NEED_NFC | LIMIT_FRAME_4MS, NEED_NFC,
+	 PSCAN_MKK1, CTRY_JAPAN18},
+	{MKK6_FCCA, MKK6, FCCA,
+	 DISALLOW_ADHOC_11A_TURB | NEED_NFC | LIMIT_FRAME_4MS, NEED_NFC,
+	 NO_PSCAN, CTRY_JAPAN31},
+
+	{MKK7_MKKB, MKK7, MKKA,
+	 DISALLOW_ADHOC_11A_TURB | NEED_NFC | LIMIT_FRAME_4MS, NEED_NFC,
+	 PSCAN_MKK1 | PSCAN_MKK3 | PSCAN_MKKA | PSCAN_MKKA_G,
+	 CTRY_JAPAN19},
+	{MKK7_MKKA1, MKK7, MKKA,
+	 DISALLOW_ADHOC_11A_TURB | NEED_NFC | LIMIT_FRAME_4MS, NEED_NFC,
+	 PSCAN_MKK1 | PSCAN_MKKA1 | PSCAN_MKKA1_G, CTRY_JAPAN32},
+	{MKK7_MKKA2, MKK7, MKKA,
+	 DISALLOW_ADHOC_11A_TURB | NEED_NFC | LIMIT_FRAME_4MS, NEED_NFC,
+	 PSCAN_MKK1 | PSCAN_MKK3 | PSCAN_MKKA2 | PSCAN_MKKA2_G,
+	 CTRY_JAPAN20},
+	{MKK7_MKKC, MKK7, MKKC,
+	 DISALLOW_ADHOC_11A_TURB | NEED_NFC | LIMIT_FRAME_4MS, NEED_NFC,
+	 PSCAN_MKK1 | PSCAN_MKK3, CTRY_JAPAN21},
+	{MKK7_FCCA, MKK7, FCCA,
+	 DISALLOW_ADHOC_11A_TURB | NEED_NFC | LIMIT_FRAME_4MS, NEED_NFC,
+	 PSCAN_MKK1 | PSCAN_MKK3, CTRY_JAPAN33},
+
+	{MKK8_MKKB, MKK8, MKKA,
+	 DISALLOW_ADHOC_11A_TURB | NEED_NFC | LIMIT_FRAME_4MS, NEED_NFC,
+	 PSCAN_MKK1 | PSCAN_MKK3 | PSCAN_MKKA | PSCAN_MKKA_G,
+	 CTRY_JAPAN22},
+	{MKK8_MKKA2, MKK8, MKKA,
+	 DISALLOW_ADHOC_11A_TURB | NEED_NFC | LIMIT_FRAME_4MS, NEED_NFC,
+	 PSCAN_MKK1 | PSCAN_MKK3 | PSCAN_MKKA2 | PSCAN_MKKA2_G,
+	 CTRY_JAPAN23},
+	{MKK8_MKKC, MKK8, MKKC,
+	 DISALLOW_ADHOC_11A_TURB | NEED_NFC | LIMIT_FRAME_4MS, NEED_NFC,
+	 PSCAN_MKK1 | PSCAN_MKK3, CTRY_JAPAN24},
+
+	{MKK9_MKKA, MKK9, MKKA,
+	 DISALLOW_ADHOC_11A | DISALLOW_ADHOC_11A_TURB | NEED_NFC |
+	 LIMIT_FRAME_4MS, NEED_NFC,
+	 PSCAN_MKK2 | PSCAN_MKK3 | PSCAN_MKKA | PSCAN_MKKA_G,
+	 CTRY_JAPAN34},
+	{MKK9_FCCA, MKK9, FCCA,
+	 DISALLOW_ADHOC_11A_TURB | NEED_NFC | LIMIT_FRAME_4MS, NEED_NFC,
+	 NO_PSCAN, CTRY_JAPAN37},
+	{MKK9_MKKA1, MKK9, MKKA,
+	 DISALLOW_ADHOC_11A_TURB | NEED_NFC | LIMIT_FRAME_4MS, NEED_NFC,
+	 PSCAN_MKKA1 | PSCAN_MKKA1_G, CTRY_JAPAN38},
+	{MKK9_MKKA2, MKK9, MKKA,
+	 DISALLOW_ADHOC_11A_TURB | NEED_NFC | LIMIT_FRAME_4MS, NEED_NFC,
+	 PSCAN_MKKA2 | PSCAN_MKKA2_G, CTRY_JAPAN40},
+	{MKK9_MKKC, MKK9, MKKC,
+	 DISALLOW_ADHOC_11A_TURB | NEED_NFC | LIMIT_FRAME_4MS, NEED_NFC,
+	 NO_PSCAN, CTRY_JAPAN39},
+
+	{MKK10_MKKA, MKK10, MKKA,
+	 DISALLOW_ADHOC_11A | DISALLOW_ADHOC_11A_TURB | NEED_NFC |
+	 LIMIT_FRAME_4MS, NEED_NFC, PSCAN_MKK2 | PSCAN_MKK3, CTRY_JAPAN35},
+	{MKK10_FCCA, MKK10, FCCA,
+	 DISALLOW_ADHOC_11A_TURB | NEED_NFC | LIMIT_FRAME_4MS, NEED_NFC,
+	 NO_PSCAN, CTRY_JAPAN41},
+	{MKK10_MKKA1, MKK10, MKKA,
+	 DISALLOW_ADHOC_11A_TURB | NEED_NFC | LIMIT_FRAME_4MS, NEED_NFC,
+	 PSCAN_MKKA1 | PSCAN_MKKA1_G, CTRY_JAPAN42},
+	{MKK10_MKKA2, MKK10, MKKA,
+	 DISALLOW_ADHOC_11A_TURB | NEED_NFC | LIMIT_FRAME_4MS, NEED_NFC,
+	 PSCAN_MKKA2 | PSCAN_MKKA2_G, CTRY_JAPAN44},
+	{MKK10_MKKC, MKK10, MKKC,
+	 DISALLOW_ADHOC_11A_TURB | NEED_NFC | LIMIT_FRAME_4MS, NEED_NFC,
+	 NO_PSCAN, CTRY_JAPAN43},
+
+	{MKK11_MKKA, MKK11, MKKA,
+	 DISALLOW_ADHOC_11A_TURB | NEED_NFC | LIMIT_FRAME_4MS, NEED_NFC,
+	 PSCAN_MKK3, CTRY_JAPAN45},
+	{MKK11_FCCA, MKK11, FCCA,
+	 DISALLOW_ADHOC_11A_TURB | NEED_NFC | LIMIT_FRAME_4MS, NEED_NFC,
+	 PSCAN_MKK3, CTRY_JAPAN46},
+	{MKK11_MKKA1, MKK11, MKKA,
+	 DISALLOW_ADHOC_11A_TURB | NEED_NFC | LIMIT_FRAME_4MS, NEED_NFC,
+	 PSCAN_MKK3 | PSCAN_MKKA1 | PSCAN_MKKA1_G, CTRY_JAPAN47},
+	{MKK11_MKKA2, MKK11, MKKA,
+	 DISALLOW_ADHOC_11A_TURB | NEED_NFC | LIMIT_FRAME_4MS, NEED_NFC,
+	 PSCAN_MKK3 | PSCAN_MKKA2 | PSCAN_MKKA2_G, CTRY_JAPAN49},
+	{MKK11_MKKC, MKK11, MKKC,
+	 DISALLOW_ADHOC_11A_TURB | NEED_NFC | LIMIT_FRAME_4MS, NEED_NFC,
+	 PSCAN_MKK3, CTRY_JAPAN48},
+
+	{MKK12_MKKA, MKK12, MKKA,
+	 DISALLOW_ADHOC_11A_TURB | NEED_NFC | LIMIT_FRAME_4MS, NEED_NFC,
+	 PSCAN_MKK1 | PSCAN_MKK3, CTRY_JAPAN50},
+	{MKK12_FCCA, MKK12, FCCA,
+	 DISALLOW_ADHOC_11A_TURB | NEED_NFC | LIMIT_FRAME_4MS, NEED_NFC,
+	 PSCAN_MKK1 | PSCAN_MKK3, CTRY_JAPAN51},
+	{MKK12_MKKA1, MKK12, MKKA,
+	 DISALLOW_ADHOC_11A_TURB | NEED_NFC | LIMIT_FRAME_4MS, NEED_NFC,
+	 PSCAN_MKK1 | PSCAN_MKK3 | PSCAN_MKKA1 | PSCAN_MKKA1_G,
+	 CTRY_JAPAN52},
+	{MKK12_MKKA2, MKK12, MKKA,
+	 DISALLOW_ADHOC_11A_TURB | NEED_NFC | LIMIT_FRAME_4MS, NEED_NFC,
+	 PSCAN_MKK1 | PSCAN_MKK3 | PSCAN_MKKA2 | PSCAN_MKKA2_G,
+	 CTRY_JAPAN54},
+	{MKK12_MKKC, MKK12, MKKC,
+	 DISALLOW_ADHOC_11A_TURB | NEED_NFC | LIMIT_FRAME_4MS, NEED_NFC,
+	 PSCAN_MKK1 | PSCAN_MKK3, CTRY_JAPAN53},
+
+	{MKK13_MKKB, MKK13, MKKA,
+	 DISALLOW_ADHOC_11A | DISALLOW_ADHOC_11A_TURB | NEED_NFC |
+	 LIMIT_FRAME_4MS, NEED_NFC,
+	 PSCAN_MKK1 | PSCAN_MKK3 | PSCAN_MKKA | PSCAN_MKKA_G,
+	 CTRY_JAPAN57},
+
+	{MKK14_MKKA1, MKK14, MKKA,
+	 DISALLOW_ADHOC_11A_TURB | NEED_NFC | LIMIT_FRAME_4MS, NEED_NFC,
+	 PSCAN_MKK1 | PSCAN_MKKA1 | PSCAN_MKKA1_G, CTRY_JAPAN58},
+	{MKK15_MKKA1, MKK15, MKKA,
+	 DISALLOW_ADHOC_11A_TURB | NEED_NFC | LIMIT_FRAME_4MS, NEED_NFC,
+	 PSCAN_MKK1 | PSCAN_MKKA1 | PSCAN_MKKA1_G, CTRY_JAPAN59},
+
+	{WOR0_WORLD, WOR0_WORLD, WOR0_WORLD, NO_REQ, NO_REQ, PSCAN_DEFER,
+	 0},
+	{WOR1_WORLD, WOR1_WORLD, WOR1_WORLD,
+	 DISALLOW_ADHOC_11A | DISALLOW_ADHOC_11A_TURB, NO_REQ, PSCAN_DEFER,
+	 0},
+	{WOR2_WORLD, WOR2_WORLD, WOR2_WORLD, DISALLOW_ADHOC_11A_TURB,
+	 NO_REQ, PSCAN_DEFER, 0},
+	{WOR3_WORLD, WOR3_WORLD, WOR3_WORLD, NO_REQ, NO_REQ, PSCAN_DEFER,
+	 0},
+	{WOR4_WORLD, WOR4_WORLD, WOR4_WORLD,
+	 DISALLOW_ADHOC_11A | DISALLOW_ADHOC_11A_TURB, NO_REQ, PSCAN_DEFER,
+	 0},
+	{WOR5_ETSIC, WOR5_ETSIC, WOR5_ETSIC,
+	 DISALLOW_ADHOC_11A | DISALLOW_ADHOC_11A_TURB, NO_REQ, PSCAN_DEFER,
+	 0},
+	{WOR01_WORLD, WOR01_WORLD, WOR01_WORLD, NO_REQ, NO_REQ,
+	 PSCAN_DEFER, 0},
+	{WOR02_WORLD, WOR02_WORLD, WOR02_WORLD, NO_REQ, NO_REQ,
+	 PSCAN_DEFER, 0},
+	{EU1_WORLD, EU1_WORLD, EU1_WORLD, NO_REQ, NO_REQ, PSCAN_DEFER, 0},
+	{WOR9_WORLD, WOR9_WORLD, WOR9_WORLD,
+	 DISALLOW_ADHOC_11A | DISALLOW_ADHOC_11A_TURB, NO_REQ, PSCAN_DEFER,
+	 0},
+	{WORA_WORLD, WORA_WORLD, WORA_WORLD,
+	 DISALLOW_ADHOC_11A | DISALLOW_ADHOC_11A_TURB, NO_REQ, PSCAN_DEFER,
+	 0},
+	{WORB_WORLD, WORB_WORLD, WORB_WORLD,
+	 DISALLOW_ADHOC_11A | DISALLOW_ADHOC_11A_TURB, NO_REQ, PSCAN_DEFER,
+	 0},
+};
+
+#define	NO_INTERSECT_REQ	0xFFFFFFFF
+#define	NO_UNION_REQ		0
+
+static struct country_code_to_enum_rd allCountries[] = {
+	{CTRY_DEBUG, NO_ENUMRD, "DB", "DEBUG", YES, YES, YES, YES, YES,
+	 YES, YES, 7000},
+	{CTRY_DEFAULT, DEF_REGDMN, "NA", "NO_COUNTRY_SET", YES, YES, YES,
+	 YES, YES, YES, YES, 7000},
+	{CTRY_ALBANIA, NULL1_WORLD, "AL", "ALBANIA", YES, NO, YES, YES, NO,
+	 NO, NO, 7000},
+	{CTRY_ALGERIA, NULL1_WORLD, "DZ", "ALGERIA", YES, NO, YES, YES, NO,
+	 NO, NO, 7000},
+	{CTRY_ARGENTINA, APL3_WORLD, "AR", "ARGENTINA", YES, NO, NO, YES,
+	 NO, YES, NO, 7000},
+	{CTRY_ARMENIA, ETSI4_WORLD, "AM", "ARMENIA", YES, NO, YES, YES,
+	 YES, NO, NO, 7000},
+	{CTRY_AUSTRALIA, FCC2_WORLD, "AU", "AUSTRALIA", YES, YES, YES, YES,
+	 YES, YES, YES, 7000},
+	{CTRY_AUSTRALIA2, FCC6_WORLD, "AU", "AUSTRALIA2", YES, YES, YES,
+	 YES, YES, YES, YES, 7000},
+	{CTRY_AUSTRIA, ETSI1_WORLD, "AT", "AUSTRIA", YES, NO, YES, YES,
+	 YES, YES, YES, 7000},
+	{CTRY_AZERBAIJAN, ETSI4_WORLD, "AZ", "AZERBAIJAN", YES, YES, YES,
+	 YES, YES, YES, YES, 7000},
+	{CTRY_BAHRAIN, APL6_WORLD, "BH", "BAHRAIN", YES, NO, YES, YES, YES,
+	 YES, NO, 7000},
+	{CTRY_BELARUS, ETSI1_WORLD, "BY", "BELARUS", YES, NO, YES, YES,
+	 YES, YES, YES, 7000},
+	{CTRY_BELGIUM, ETSI1_WORLD, "BE", "BELGIUM", YES, NO, YES, YES,
+	 YES, YES, YES, 7000},
+	{CTRY_BELGIUM2, ETSI4_WORLD, "BL", "BELGIUM", YES, NO, YES, YES,
+	 YES, YES, YES, 7000},
+	{CTRY_BELIZE, APL1_ETSIC, "BZ", "BELIZE", YES, YES, YES, YES, YES,
+	 YES, YES, 7000},
+	{CTRY_BOLIVIA, APL1_ETSIC, "BO", "BOLVIA", YES, YES, YES, YES, YES,
+	 YES, YES, 7000},
+	{CTRY_BOSNIA_HERZ, ETSI1_WORLD, "BA", "BOSNIA_HERZGOWINA", YES, NO,
+	 YES, YES, YES, YES, NO, 7000},
+	{CTRY_BRAZIL, FCC3_WORLD, "BR", "BRAZIL", YES, NO, NO, YES, NO,
+	 YES, NO, 7000},
+	{CTRY_BRUNEI_DARUSSALAM, APL1_WORLD, "BN", "BRUNEI DARUSSALAM",
+	 YES, YES, YES, YES, YES, YES, YES, 7000},
+	{CTRY_BULGARIA, ETSI6_WORLD, "BG", "BULGARIA", YES, NO, YES, YES,
+	 YES, YES, YES, 7000},
+	{CTRY_CANADA, FCC2_FCCA, "CA", "CANADA", YES, YES, YES, YES, YES,
+	 YES, YES, 7000},
+	{CTRY_CANADA2, FCC6_FCCA, "CA", "CANADA2", YES, YES, YES, YES, YES,
+	 YES, YES, 7000},
+	{CTRY_CHILE, APL6_WORLD, "CL", "CHILE", YES, YES, YES, YES, YES,
+	 YES, YES, 7000},
+	{CTRY_CHINA, APL1_WORLD, "CN", "CHINA", YES, YES, YES, YES, YES,
+	 YES, YES, 7000},
+	{CTRY_COLOMBIA, FCC1_FCCA, "CO", "COLOMBIA", YES, NO, YES, YES,
+	 YES, YES, NO, 7000},
+	{CTRY_COSTA_RICA, FCC1_WORLD, "CR", "COSTA RICA", YES, NO, YES,
+	 YES, YES, YES, NO, 7000},
+	{CTRY_CROATIA, ETSI3_WORLD, "HR", "CROATIA", YES, NO, YES, YES,
+	 YES, YES, NO, 7000},
+	{CTRY_CYPRUS, ETSI1_WORLD, "CY", "CYPRUS", YES, YES, YES, YES, YES,
+	 YES, YES, 7000},
+	{CTRY_CZECH, ETSI3_WORLD, "CZ", "CZECH REPUBLIC", YES, NO, YES,
+	 YES, YES, YES, YES, 7000},
+	{CTRY_DENMARK, ETSI1_WORLD, "DK", "DENMARK", YES, NO, YES, YES,
+	 YES, YES, YES, 7000},
+	{CTRY_DOMINICAN_REPUBLIC, FCC1_FCCA, "DO", "DOMINICAN REPUBLIC",
+	 YES, YES, YES, YES, YES, YES, YES, 7000},
+	{CTRY_ECUADOR, FCC1_WORLD, "EC", "ECUADOR", YES, NO, NO, YES, YES,
+	 YES, NO, 7000},
+	{CTRY_EGYPT, ETSI3_WORLD, "EG", "EGYPT", YES, NO, YES, YES, YES,
+	 YES, NO, 7000},
+	{CTRY_EL_SALVADOR, FCC1_WORLD, "SV", "EL SALVADOR", YES, NO, YES,
+	 YES, YES, YES, NO, 7000},
+	{CTRY_ESTONIA, ETSI1_WORLD, "EE", "ESTONIA", YES, NO, YES, YES,
+	 YES, YES, YES, 7000},
+	{CTRY_FINLAND, ETSI1_WORLD, "FI", "FINLAND", YES, NO, YES, YES,
+	 YES, YES, YES, 7000},
+	{CTRY_FRANCE, ETSI1_WORLD, "FR", "FRANCE", YES, NO, YES, YES, YES,
+	 YES, YES, 7000},
+	{CTRY_GEORGIA, ETSI4_WORLD, "GE", "GEORGIA", YES, YES, YES, YES,
+	 YES, YES, YES, 7000},
+	{CTRY_GERMANY, ETSI1_WORLD, "DE", "GERMANY", YES, NO, YES, YES,
+	 YES, YES, YES, 7000},
+	{CTRY_GREECE, ETSI1_WORLD, "GR", "GREECE", YES, NO, YES, YES, YES,
+	 YES, YES, 7000},
+	{CTRY_GUATEMALA, FCC1_FCCA, "GT", "GUATEMALA", YES, YES, YES, YES,
+	 YES, YES, YES, 7000},
+	{CTRY_HONDURAS, NULL1_WORLD, "HN", "HONDURAS", YES, NO, YES, YES,
+	 YES, NO, NO, 7000},
+	{CTRY_HONG_KONG, FCC2_WORLD, "HK", "HONG KONG", YES, YES, YES, YES,
+	 YES, YES, YES, 7000},
+	{CTRY_HUNGARY, ETSI1_WORLD, "HU", "HUNGARY", YES, NO, YES, YES,
+	 YES, YES, YES, 7000},
+	{CTRY_ICELAND, ETSI1_WORLD, "IS", "ICELAND", YES, NO, YES, YES,
+	 YES, YES, YES, 7000},
+	{CTRY_INDIA, APL6_WORLD, "IN", "INDIA", YES, NO, YES, YES, YES,
+	 YES, NO, 7000},
+	{CTRY_INDONESIA, APL1_WORLD, "ID", "INDONESIA", YES, NO, YES, YES,
+	 YES, YES, NO, 7000},
+	{CTRY_IRAN, APL1_WORLD, "IR", "IRAN", YES, YES, YES, YES, YES, YES,
+	 YES, 7000},
+	{CTRY_IRELAND, ETSI1_WORLD, "IE", "IRELAND", YES, NO, YES, YES,
+	 YES, YES, YES, 7000},
+	{CTRY_ISRAEL, NULL1_WORLD, "IL", "ISRAEL", YES, NO, YES, YES, YES,
+	 NO, NO, 7000},
+	{CTRY_ITALY, ETSI1_WORLD, "IT", "ITALY", YES, NO, YES, YES, YES,
+	 YES, YES, 7000},
+	{CTRY_JAMAICA, ETSI1_WORLD, "JM", "JAMAICA", YES, NO, YES, YES,
+	 YES, YES, YES, 7000},
+
+	{CTRY_JAPAN, MKK1_MKKA, "JP", "JAPAN", YES, NO, NO, YES, YES, YES,
+	 YES, 7000},
+	{CTRY_JAPAN1, MKK1_MKKB, "JP", "JAPAN1", YES, NO, NO, YES, YES,
+	 YES, YES, 7000},
+	{CTRY_JAPAN2, MKK1_FCCA, "JP", "JAPAN2", YES, NO, NO, YES, YES,
+	 YES, YES, 7000},
+	{CTRY_JAPAN3, MKK2_MKKA, "JP", "JAPAN3", YES, NO, NO, YES, YES,
+	 YES, YES, 7000},
+	{CTRY_JAPAN4, MKK1_MKKA1, "JP", "JAPAN4", YES, NO, NO, YES, YES,
+	 YES, YES, 7000},
+	{CTRY_JAPAN5, MKK1_MKKA2, "JP", "JAPAN5", YES, NO, NO, YES, YES,
+	 YES, YES, 7000},
+	{CTRY_JAPAN6, MKK1_MKKC, "JP", "JAPAN6", YES, NO, NO, YES, YES,
+	 YES, YES, 7000},
+
+	{CTRY_JAPAN7, MKK3_MKKB, "JP", "JAPAN7", YES, NO, NO, YES, YES,
+	 YES, YES, 7000},
+	{CTRY_JAPAN8, MKK3_MKKA2, "JP", "JAPAN8", YES, NO, NO, YES, YES,
+	 YES, YES, 7000},
+	{CTRY_JAPAN9, MKK3_MKKC, "JP", "JAPAN9", YES, NO, NO, YES, YES,
+	 YES, YES, 7000},
+
+	{CTRY_JAPAN10, MKK4_MKKB, "JP", "JAPAN10", YES, NO, NO, YES, YES,
+	 YES, YES, 7000},
+	{CTRY_JAPAN11, MKK4_MKKA2, "JP", "JAPAN11", YES, NO, NO, YES, YES,
+	 YES, YES, 7000},
+	{CTRY_JAPAN12, MKK4_MKKC, "JP", "JAPAN12", YES, NO, NO, YES, YES,
+	 YES, YES, 7000},
+
+	{CTRY_JAPAN13, MKK5_MKKB, "JP", "JAPAN13", YES, NO, NO, YES, YES,
+	 YES, YES, 7000},
+	{CTRY_JAPAN14, MKK5_MKKA2, "JP", "JAPAN14", YES, NO, NO, YES, YES,
+	 YES, YES, 7000},
+	{CTRY_JAPAN15, MKK5_MKKC, "JP", "JAPAN15", YES, NO, NO, YES, YES,
+	 YES, YES, 7000},
+
+	{CTRY_JAPAN16, MKK6_MKKB, "JP", "JAPAN16", YES, NO, NO, YES, YES,
+	 YES, YES, 7000},
+	{CTRY_JAPAN17, MKK6_MKKA2, "JP", "JAPAN17", YES, NO, NO, YES, YES,
+	 YES, YES, 7000},
+	{CTRY_JAPAN18, MKK6_MKKC, "JP", "JAPAN18", YES, NO, NO, YES, YES,
+	 YES, YES, 7000},
+
+	{CTRY_JAPAN19, MKK7_MKKB, "JP", "JAPAN19", YES, NO, NO, YES, YES,
+	 YES, YES, 7000},
+	{CTRY_JAPAN20, MKK7_MKKA2, "JP", "JAPAN20", YES, NO, NO, YES, YES,
+	 YES, YES, 7000},
+	{CTRY_JAPAN21, MKK7_MKKC, "JP", "JAPAN21", YES, NO, NO, YES, YES,
+	 YES, YES, 7000},
+
+	{CTRY_JAPAN22, MKK8_MKKB, "JP", "JAPAN22", YES, NO, NO, YES, YES,
+	 YES, YES, 7000},
+	{CTRY_JAPAN23, MKK8_MKKA2, "JP", "JAPAN23", YES, NO, NO, YES, YES,
+	 YES, YES, 7000},
+	{CTRY_JAPAN24, MKK8_MKKC, "JP", "JAPAN24", YES, NO, NO, YES, YES,
+	 YES, YES, 7000},
+
+	{CTRY_JAPAN25, MKK3_MKKA, "JP", "JAPAN25", YES, NO, NO, YES, YES,
+	 YES, YES, 7000},
+	{CTRY_JAPAN26, MKK3_MKKA1, "JP", "JAPAN26", YES, NO, NO, YES, YES,
+	 YES, YES, 7000},
+	{CTRY_JAPAN27, MKK3_FCCA, "JP", "JAPAN27", YES, NO, NO, YES, YES,
+	 YES, YES, 7000},
+	{CTRY_JAPAN28, MKK4_MKKA1, "JP", "JAPAN28", YES, NO, NO, YES, YES,
+	 YES, YES, 7000},
+	{CTRY_JAPAN29, MKK4_FCCA, "JP", "JAPAN29", YES, NO, NO, YES, YES,
+	 YES, YES, 7000},
+	{CTRY_JAPAN30, MKK6_MKKA1, "JP", "JAPAN30", YES, NO, NO, YES, YES,
+	 YES, YES, 7000},
+	{CTRY_JAPAN31, MKK6_FCCA, "JP", "JAPAN31", YES, NO, NO, YES, YES,
+	 YES, YES, 7000},
+	{CTRY_JAPAN32, MKK7_MKKA1, "JP", "JAPAN32", YES, NO, NO, YES, YES,
+	 YES, YES, 7000},
+	{CTRY_JAPAN33, MKK7_FCCA, "JP", "JAPAN33", YES, NO, NO, YES, YES,
+	 YES, YES, 7000},
+	{CTRY_JAPAN34, MKK9_MKKA, "JP", "JAPAN34", YES, NO, NO, YES, YES,
+	 YES, YES, 7000},
+	{CTRY_JAPAN35, MKK10_MKKA, "JP", "JAPAN35", YES, NO, NO, YES, YES,
+	 YES, YES, 7000},
+	{CTRY_JAPAN36, MKK4_MKKA, "JP", "JAPAN36", YES, NO, NO, YES, YES,
+	 YES, YES, 7000},
+	{CTRY_JAPAN37, MKK9_FCCA, "JP", "JAPAN37", YES, NO, NO, YES, YES,
+	 YES, YES, 7000},
+	{CTRY_JAPAN38, MKK9_MKKA1, "JP", "JAPAN38", YES, NO, NO, YES, YES,
+	 YES, YES, 7000},
+	{CTRY_JAPAN39, MKK9_MKKC, "JP", "JAPAN39", YES, NO, NO, YES, YES,
+	 YES, YES, 7000},
+	{CTRY_JAPAN40, MKK9_MKKA2, "JP", "JAPAN40", YES, NO, NO, YES, YES,
+	 YES, YES, 7000},
+	{CTRY_JAPAN41, MKK10_FCCA, "JP", "JAPAN41", YES, NO, NO, YES, YES,
+	 YES, YES, 7000},
+	{CTRY_JAPAN42, MKK10_MKKA1, "JP", "JAPAN42", YES, NO, NO, YES, YES,
+	 YES, YES, 7000},
+	{CTRY_JAPAN43, MKK10_MKKC, "JP", "JAPAN43", YES, NO, NO, YES, YES,
+	 YES, YES, 7000},
+	{CTRY_JAPAN44, MKK10_MKKA2, "JP", "JAPAN44", YES, NO, NO, YES, YES,
+	 YES, YES, 7000},
+	{CTRY_JAPAN45, MKK11_MKKA, "JP", "JAPAN45", YES, NO, NO, YES, YES,
+	 YES, YES, 7000},
+	{CTRY_JAPAN46, MKK11_FCCA, "JP", "JAPAN46", YES, NO, NO, YES, YES,
+	 YES, YES, 7000},
+	{CTRY_JAPAN47, MKK11_MKKA1, "JP", "JAPAN47", YES, NO, NO, YES, YES,
+	 YES, YES, 7000},
+	{CTRY_JAPAN48, MKK11_MKKC, "JP", "JAPAN48", YES, NO, NO, YES, YES,
+	 YES, YES, 7000},
+	{CTRY_JAPAN49, MKK11_MKKA2, "JP", "JAPAN49", YES, NO, NO, YES, YES,
+	 YES, YES, 7000},
+	{CTRY_JAPAN50, MKK12_MKKA, "JP", "JAPAN50", YES, NO, NO, YES, YES,
+	 YES, YES, 7000},
+	{CTRY_JAPAN51, MKK12_FCCA, "JP", "JAPAN51", YES, NO, NO, YES, YES,
+	 YES, YES, 7000},
+	{CTRY_JAPAN52, MKK12_MKKA1, "JP", "JAPAN52", YES, NO, NO, YES, YES,
+	 YES, YES, 7000},
+	{CTRY_JAPAN53, MKK12_MKKC, "JP", "JAPAN53", YES, NO, NO, YES, YES,
+	 YES, YES, 7000},
+	{CTRY_JAPAN54, MKK12_MKKA2, "JP", "JAPAN54", YES, NO, NO, YES, YES,
+	 YES, YES, 7000},
+
+	{CTRY_JAPAN57, MKK13_MKKB, "JP", "JAPAN57", YES, NO, NO, YES, YES,
+	 YES, YES, 7000},
+	{CTRY_JAPAN58, MKK14_MKKA1, "JP", "JAPAN58", YES, NO, NO, YES, YES,
+	 YES, YES, 7000},
+	{CTRY_JAPAN59, MKK15_MKKA1, "JP", "JAPAN59", YES, NO, NO, YES, YES,
+	 YES, YES, 7000},
+
+	{CTRY_JORDAN, ETSI2_WORLD, "JO", "JORDAN", YES, NO, YES, YES, YES,
+	 YES, NO, 7000},
+	{CTRY_KAZAKHSTAN, NULL1_WORLD, "KZ", "KAZAKHSTAN", YES, NO, YES,
+	 YES, YES, NO, NO, 7000},
+	{CTRY_KOREA_NORTH, APL9_WORLD, "KP", "NORTH KOREA", YES, NO, NO,
+	 YES, YES, YES, YES, 7000},
+	{CTRY_KOREA_ROC, APL9_WORLD, "KR", "KOREA REPUBLIC", YES, NO, NO,
+	 YES, NO, YES, NO, 7000},
+	{CTRY_KOREA_ROC2, APL2_WORLD, "K2", "KOREA REPUBLIC2", YES, NO, NO,
+	 YES, NO, YES, NO, 7000},
+	{CTRY_KOREA_ROC3, APL9_WORLD, "K3", "KOREA REPUBLIC3", YES, NO, NO,
+	 YES, NO, YES, NO, 7000},
+	{CTRY_KUWAIT, NULL1_WORLD, "KW", "KUWAIT", YES, NO, YES, YES, YES,
+	 NO, NO, 7000},
+	{CTRY_LATVIA, ETSI1_WORLD, "LV", "LATVIA", YES, NO, YES, YES, YES,
+	 YES, YES, 7000},
+	{CTRY_LEBANON, NULL1_WORLD, "LB", "LEBANON", YES, NO, YES, YES,
+	 YES, NO, NO, 7000},
+	{CTRY_LIECHTENSTEIN, ETSI1_WORLD, "LI", "LIECHTENSTEIN", YES, NO,
+	 YES, YES, YES, YES, YES, 7000},
+	{CTRY_LITHUANIA, ETSI1_WORLD, "LT", "LITHUANIA", YES, NO, YES, YES,
+	 YES, YES, YES, 7000},
+	{CTRY_LUXEMBOURG, ETSI1_WORLD, "LU", "LUXEMBOURG", YES, NO, YES,
+	 YES, YES, YES, YES, 7000},
+	{CTRY_MACAU, FCC2_WORLD, "MO", "MACAU", YES, YES, YES, YES, YES,
+	 YES, YES, 7000},
+	{CTRY_MACEDONIA, NULL1_WORLD, "MK", "MACEDONIA", YES, NO, YES, YES,
+	 YES, NO, NO, 7000},
+	{CTRY_MALAYSIA, APL8_WORLD, "MY", "MALAYSIA", YES, NO, NO, YES, NO,
+	 YES, NO, 7000},
+	{CTRY_MALTA, ETSI1_WORLD, "MT", "MALTA", YES, NO, YES, YES, YES,
+	 YES, YES, 7000},
+	{CTRY_MEXICO, FCC1_FCCA, "MX", "MEXICO", YES, YES, YES, YES, YES,
+	 YES, YES, 7000},
+	{CTRY_MONACO, ETSI4_WORLD, "MC", "MONACO", YES, YES, YES, YES, YES,
+	 YES, YES, 7000},
+	{CTRY_MOROCCO, NULL1_WORLD, "MA", "MOROCCO", YES, NO, YES, YES,
+	 YES, NO, NO, 7000},
+	{CTRY_NEPAL, APL1_WORLD, "NP", "NEPAL", YES, NO, YES, YES, YES,
+	 YES, YES, 7000},
+	{CTRY_NETHERLANDS, ETSI1_WORLD, "NL", "NETHERLANDS", YES, NO, YES,
+	 YES, YES, YES, YES, 7000},
+	{CTRY_NETHERLANDS_ANTILLES, ETSI1_WORLD, "AN",
+	 "NETHERLANDS-ANTILLES", YES, NO, YES, YES, YES, YES, YES, 7000},
+	{CTRY_NEW_ZEALAND, FCC2_ETSIC, "NZ", "NEW ZEALAND", YES, NO, YES,
+	 YES, YES, YES, NO, 7000},
+	{CTRY_NORWAY, ETSI1_WORLD, "NO", "NORWAY", YES, NO, YES, YES, YES,
+	 YES, YES, 7000},
+	{CTRY_OMAN, APL6_WORLD, "OM", "OMAN", YES, NO, YES, YES, YES, YES,
+	 NO, 7000},
+	{CTRY_PAKISTAN, NULL1_WORLD, "PK", "PAKISTAN", YES, NO, YES, YES,
+	 YES, NO, NO, 7000},
+	{CTRY_PANAMA, FCC1_FCCA, "PA", "PANAMA", YES, YES, YES, YES, YES,
+	 YES, YES, 7000},
+	{CTRY_PAPUA_NEW_GUINEA, FCC1_WORLD, "PG", "PAPUA NEW GUINEA", YES,
+	 YES, YES, YES, YES, YES, YES, 7000},
+	{CTRY_PERU, APL1_WORLD, "PE", "PERU", YES, NO, YES, YES, YES, YES,
+	 NO, 7000},
+	{CTRY_PHILIPPINES, APL1_WORLD, "PH", "PHILIPPINES", YES, YES, YES,
+	 YES, YES, YES, YES, 7000},
+	{CTRY_POLAND, ETSI1_WORLD, "PL", "POLAND", YES, NO, YES, YES, YES,
+	 YES, YES, 7000},
+	{CTRY_PORTUGAL, ETSI1_WORLD, "PT", "PORTUGAL", YES, NO, YES, YES,
+	 YES, YES, YES, 7000},
+	{CTRY_PUERTO_RICO, FCC1_FCCA, "PR", "PUERTO RICO", YES, YES, YES,
+	 YES, YES, YES, YES, 7000},
+	{CTRY_QATAR, NULL1_WORLD, "QA", "QATAR", YES, NO, YES, YES, YES,
+	 NO, NO, 7000},
+	{CTRY_ROMANIA, NULL1_WORLD, "RO", "ROMANIA", YES, NO, YES, YES,
+	 YES, NO, NO, 7000},
+	{CTRY_RUSSIA, NULL1_WORLD, "RU", "RUSSIA", YES, NO, YES, YES, YES,
+	 NO, NO, 7000},
+	{CTRY_SAUDI_ARABIA, NULL1_WORLD, "SA", "SAUDI ARABIA", YES, NO,
+	 YES, YES, YES, NO, NO, 7000},
+	{CTRY_SERBIA_MONTENEGRO, ETSI1_WORLD, "CS", "SERBIA & MONTENEGRO",
+	 YES, NO, YES, YES, YES, YES, YES, 7000},
+	{CTRY_SINGAPORE, APL6_WORLD, "SG", "SINGAPORE", YES, YES, YES, YES,
+	 YES, YES, YES, 7000},
+	{CTRY_SLOVAKIA, ETSI1_WORLD, "SK", "SLOVAK REPUBLIC", YES, NO, YES,
+	 YES, YES, YES, YES, 7000},
+	{CTRY_SLOVENIA, ETSI1_WORLD, "SI", "SLOVENIA", YES, NO, YES, YES,
+	 YES, YES, YES, 7000},
+	{CTRY_SOUTH_AFRICA, FCC3_WORLD, "ZA", "SOUTH AFRICA", YES, NO, YES,
+	 YES, YES, YES, NO, 7000},
+	{CTRY_SPAIN, ETSI1_WORLD, "ES", "SPAIN", YES, NO, YES, YES, YES,
+	 YES, YES, 7000},
+	{CTRY_SRI_LANKA, FCC3_WORLD, "LK", "SRI LANKA", YES, NO, YES, YES,
+	 YES, YES, NO, 7000},
+	{CTRY_SWEDEN, ETSI1_WORLD, "SE", "SWEDEN", YES, NO, YES, YES, YES,
+	 YES, YES, 7000},
+	{CTRY_SWITZERLAND, ETSI1_WORLD, "CH", "SWITZERLAND", YES, NO, YES,
+	 YES, YES, YES, YES, 7000},
+	{CTRY_SYRIA, NULL1_WORLD, "SY", "SYRIA", YES, NO, YES, YES, YES,
+	 NO, NO, 7000},
+	{CTRY_TAIWAN, APL3_FCCA, "TW", "TAIWAN", YES, YES, YES, YES, YES,
+	 YES, YES, 7000},
+	{CTRY_THAILAND, NULL1_WORLD, "TH", "THAILAND", YES, NO, YES, YES,
+	 YES, NO, NO, 7000},
+	{CTRY_TRINIDAD_Y_TOBAGO, ETSI4_WORLD, "TT", "TRINIDAD & TOBAGO",
+	 YES, NO, YES, YES, YES, YES, NO, 7000},
+	{CTRY_TUNISIA, ETSI3_WORLD, "TN", "TUNISIA", YES, NO, YES, YES,
+	 YES, YES, NO, 7000},
+	{CTRY_TURKEY, ETSI3_WORLD, "TR", "TURKEY", YES, NO, YES, YES, YES,
+	 YES, NO, 7000},
+	{CTRY_UKRAINE, NULL1_WORLD, "UA", "UKRAINE", YES, NO, YES, YES,
+	 YES, NO, NO, 7000},
+	{CTRY_UAE, NULL1_WORLD, "AE", "UNITED ARAB EMIRATES", YES, NO, YES,
+	 YES, YES, NO, NO, 7000},
+	{CTRY_UNITED_KINGDOM, ETSI1_WORLD, "GB", "UNITED KINGDOM", YES, NO,
+	 YES, YES, YES, YES, YES, 7000},
+	{CTRY_UNITED_STATES, FCC3_FCCA, "US", "UNITED STATES", YES, YES,
+	 YES, YES, YES, YES, YES, 5825},
+	{CTRY_UNITED_STATES_FCC49, FCC4_FCCA, "PS",
+	 "UNITED STATES (PUBLIC SAFETY)", YES, YES, YES, YES, YES, YES,
+	 YES, 7000},
+	{CTRY_URUGUAY, APL2_WORLD, "UY", "URUGUAY", YES, NO, YES, YES, YES,
+	 YES, NO, 7000},
+	{CTRY_UZBEKISTAN, FCC3_FCCA, "UZ", "UZBEKISTAN", YES, YES, YES,
+	 YES, YES, YES, YES, 7000},
+	{CTRY_VENEZUELA, APL2_ETSIC, "VE", "VENEZUELA", YES, NO, YES, YES,
+	 YES, YES, NO, 7000},
+	{CTRY_VIET_NAM, NULL1_WORLD, "VN", "VIET NAM", YES, NO, YES, YES,
+	 YES, NO, NO, 7000},
+	{CTRY_YEMEN, NULL1_WORLD, "YE", "YEMEN", YES, NO, YES, YES, YES,
+	 NO, NO, 7000},
+	{CTRY_ZIMBABWE, NULL1_WORLD, "ZW", "ZIMBABWE", YES, NO, YES, YES,
+	 YES, NO, NO, 7000}
+};
+
+enum {
+	NO_DFS = 0x0000000000000000ULL,
+	DFS_FCC3 = 0x0000000000000001ULL,
+	DFS_ETSI = 0x0000000000000002ULL,
+	DFS_MKK4 = 0x0000000000000004ULL,
+};
+
+enum {
+	F1_4915_4925,
+	F1_4935_4945,
+	F1_4920_4980,
+	F1_4942_4987,
+	F1_4945_4985,
+	F1_4950_4980,
+	F1_5035_5040,
+	F1_5040_5080,
+	F1_5055_5055,
+
+	F1_5120_5240,
+
+	F1_5170_5230,
+	F2_5170_5230,
+
+	F1_5180_5240,
+	F2_5180_5240,
+	F3_5180_5240,
+	F4_5180_5240,
+	F5_5180_5240,
+	F6_5180_5240,
+	F7_5180_5240,
+	F8_5180_5240,
+
+	F1_5180_5320,
+
+	F1_5240_5280,
+
+	F1_5260_5280,
+
+	F1_5260_5320,
+	F2_5260_5320,
+	F3_5260_5320,
+	F4_5260_5320,
+	F5_5260_5320,
+	F6_5260_5320,
+
+	F1_5260_5700,
+
+	F1_5280_5320,
+
+	F1_5500_5580,
+
+	F1_5500_5620,
+
+	F1_5500_5700,
+	F2_5500_5700,
+	F3_5500_5700,
+	F4_5500_5700,
+	F5_5500_5700,
+
+	F1_5660_5700,
+
+	F1_5745_5805,
+	F2_5745_5805,
+	F3_5745_5805,
+
+	F1_5745_5825,
+	F2_5745_5825,
+	F3_5745_5825,
+	F4_5745_5825,
+	F5_5745_5825,
+	F6_5745_5825,
+
+	W1_4920_4980,
+	W1_5040_5080,
+	W1_5170_5230,
+	W1_5180_5240,
+	W1_5260_5320,
+	W1_5745_5825,
+	W1_5500_5700,
+	A_DEMO_ALL_CHANNELS
+};
+
+static struct RegDmnFreqBand regDmn5GhzFreq[] = {
+	{4915, 4925, 23, 0, 10, 5, NO_DFS, PSCAN_MKK2, 16},
+	{4935, 4945, 23, 0, 10, 5, NO_DFS, PSCAN_MKK2, 16},
+	{4920, 4980, 23, 0, 20, 20, NO_DFS, PSCAN_MKK2, 7},
+	{4942, 4987, 27, 6, 5, 5, NO_DFS, PSCAN_FCC, 0},
+	{4945, 4985, 30, 6, 10, 5, NO_DFS, PSCAN_FCC, 0},
+	{4950, 4980, 33, 6, 20, 5, NO_DFS, PSCAN_FCC, 0},
+	{5035, 5040, 23, 0, 10, 5, NO_DFS, PSCAN_MKK2, 12},
+	{5040, 5080, 23, 0, 20, 20, NO_DFS, PSCAN_MKK2, 2},
+	{5055, 5055, 23, 0, 10, 5, NO_DFS, PSCAN_MKK2, 12},
+
+	{5120, 5240, 5, 6, 20, 20, NO_DFS, NO_PSCAN, 0},
+
+	{5170, 5230, 23, 0, 20, 20, NO_DFS, PSCAN_MKK1 | PSCAN_MKK2, 1},
+	{5170, 5230, 20, 0, 20, 20, NO_DFS, PSCAN_MKK1 | PSCAN_MKK2, 1},
+
+	{5180, 5240, 15, 0, 20, 20, NO_DFS, PSCAN_FCC | PSCAN_ETSI, 0},
+	{5180, 5240, 17, 6, 20, 20, NO_DFS, NO_PSCAN, 1},
+	{5180, 5240, 18, 0, 20, 20, NO_DFS, PSCAN_FCC | PSCAN_ETSI, 0},
+	{5180, 5240, 20, 0, 20, 20, NO_DFS, PSCAN_FCC | PSCAN_ETSI, 0},
+	{5180, 5240, 23, 0, 20, 20, NO_DFS, PSCAN_FCC | PSCAN_ETSI, 0},
+	{5180, 5240, 23, 6, 20, 20, NO_DFS, PSCAN_FCC, 0},
+	{5180, 5240, 20, 0, 20, 20, NO_DFS, PSCAN_MKK1 | PSCAN_MKK3, 0},
+	{5180, 5240, 23, 6, 20, 20, NO_DFS, NO_PSCAN, 0},
+
+	{5180, 5320, 20, 6, 20, 20, NO_DFS, PSCAN_ETSI, 0},
+
+	{5240, 5280, 23, 0, 20, 20, DFS_FCC3, PSCAN_FCC | PSCAN_ETSI, 0},
+
+	{5260, 5280, 23, 0, 20, 20, DFS_FCC3 | DFS_ETSI,
+	 PSCAN_FCC | PSCAN_ETSI, 0},
+
+	{5260, 5320, 18, 0, 20, 20, DFS_FCC3 | DFS_ETSI,
+	 PSCAN_FCC | PSCAN_ETSI, 0},
+
+	{5260, 5320, 20, 0, 20, 20, DFS_FCC3 | DFS_ETSI | DFS_MKK4,
+	 PSCAN_FCC | PSCAN_ETSI | PSCAN_MKK3, 0},
+
+
+	{5260, 5320, 20, 6, 20, 20, DFS_FCC3 | DFS_ETSI,
+	 PSCAN_FCC | PSCAN_ETSI, 2},
+	{5260, 5320, 23, 6, 20, 20, DFS_FCC3 | DFS_ETSI, PSCAN_FCC, 2},
+	{5260, 5320, 23, 6, 20, 20, DFS_FCC3 | DFS_ETSI, PSCAN_FCC, 0},
+	{5260, 5320, 30, 0, 20, 20, NO_DFS, NO_PSCAN, 0},
+
+	{5260, 5700, 5, 6, 20, 20, DFS_FCC3 | DFS_ETSI, NO_PSCAN, 0},
+
+	{5280, 5320, 17, 6, 20, 20, DFS_FCC3 | DFS_ETSI, PSCAN_FCC, 0},
+
+	{5500, 5580, 23, 6, 20, 20, DFS_FCC3, PSCAN_FCC, 0},
+
+	{5500, 5620, 30, 6, 20, 20, DFS_ETSI, PSCAN_ETSI, 0},
+
+	{5500, 5700, 20, 6, 20, 20, DFS_FCC3 | DFS_ETSI, PSCAN_FCC, 4},
+	{5500, 5700, 27, 0, 20, 20, DFS_FCC3 | DFS_ETSI,
+	 PSCAN_FCC | PSCAN_ETSI, 0},
+	{5500, 5700, 30, 0, 20, 20, DFS_FCC3 | DFS_ETSI,
+	 PSCAN_FCC | PSCAN_ETSI, 0},
+	{5500, 5700, 23, 0, 20, 20, DFS_FCC3 | DFS_ETSI | DFS_MKK4,
+	 PSCAN_MKK3 | PSCAN_FCC, 0},
+	{5500, 5700, 30, 6, 20, 20, DFS_ETSI, PSCAN_ETSI, 0},
+
+	{5660, 5700, 23, 6, 20, 20, DFS_FCC3, PSCAN_FCC, 0},
+
+	{5745, 5805, 23, 0, 20, 20, NO_DFS, NO_PSCAN, 0},
+	{5745, 5805, 30, 6, 20, 20, NO_DFS, NO_PSCAN, 0},
+	{5745, 5805, 30, 6, 20, 20, NO_DFS, PSCAN_ETSI, 0},
+	{5745, 5825, 5, 6, 20, 20, NO_DFS, NO_PSCAN, 0},
+	{5745, 5825, 17, 0, 20, 20, NO_DFS, NO_PSCAN, 0},
+	{5745, 5825, 20, 0, 20, 20, NO_DFS, NO_PSCAN, 0},
+	{5745, 5825, 30, 0, 20, 20, NO_DFS, NO_PSCAN, 0},
+	{5745, 5825, 30, 6, 20, 20, NO_DFS, NO_PSCAN, 3},
+	{5745, 5825, 30, 6, 20, 20, NO_DFS, NO_PSCAN, 0},
+
+
+	{4920, 4980, 30, 0, 20, 20, NO_DFS, PSCAN_WWR, 0},
+	{5040, 5080, 30, 0, 20, 20, NO_DFS, PSCAN_WWR, 0},
+	{5170, 5230, 30, 0, 20, 20, NO_DFS, PSCAN_WWR, 0},
+	{5180, 5240, 30, 0, 20, 20, NO_DFS, PSCAN_WWR, 0},
+	{5260, 5320, 30, 0, 20, 20, DFS_FCC3 | DFS_ETSI, PSCAN_WWR, 0},
+	{5745, 5825, 30, 0, 20, 20, NO_DFS, PSCAN_WWR, 0},
+	{5500, 5700, 30, 0, 20, 20, DFS_FCC3 | DFS_ETSI, PSCAN_WWR, 0},
+	{4920, 6100, 30, 6, 20, 20, NO_DFS, NO_PSCAN, 0},
+};
+
+enum {
+	T1_5130_5650,
+	T1_5150_5670,
+
+	T1_5200_5200,
+	T2_5200_5200,
+	T3_5200_5200,
+	T4_5200_5200,
+	T5_5200_5200,
+	T6_5200_5200,
+	T7_5200_5200,
+	T8_5200_5200,
+
+	T1_5200_5280,
+	T2_5200_5280,
+	T3_5200_5280,
+	T4_5200_5280,
+	T5_5200_5280,
+	T6_5200_5280,
+
+	T1_5200_5240,
+	T1_5210_5210,
+	T2_5210_5210,
+	T3_5210_5210,
+	T4_5210_5210,
+	T5_5210_5210,
+	T6_5210_5210,
+	T7_5210_5210,
+	T8_5210_5210,
+	T9_5210_5210,
+	T10_5210_5210,
+	T1_5240_5240,
+
+	T1_5210_5250,
+	T1_5210_5290,
+	T2_5210_5290,
+	T3_5210_5290,
+
+	T1_5280_5280,
+	T2_5280_5280,
+	T1_5290_5290,
+	T2_5290_5290,
+	T3_5290_5290,
+	T1_5250_5290,
+	T2_5250_5290,
+	T3_5250_5290,
+	T4_5250_5290,
+
+	T1_5540_5660,
+	T2_5540_5660,
+	T3_5540_5660,
+	T1_5760_5800,
+	T2_5760_5800,
+	T3_5760_5800,
+	T4_5760_5800,
+	T5_5760_5800,
+	T6_5760_5800,
+	T7_5760_5800,
+
+	T1_5765_5805,
+	T2_5765_5805,
+	T3_5765_5805,
+	T4_5765_5805,
+	T5_5765_5805,
+	T6_5765_5805,
+	T7_5765_5805,
+	T8_5765_5805,
+	T9_5765_5805,
+
+	WT1_5210_5250,
+	WT1_5290_5290,
+	WT1_5540_5660,
+	WT1_5760_5800,
+};
+
+enum {
+	F1_2312_2372,
+	F2_2312_2372,
+
+	F1_2412_2472,
+	F2_2412_2472,
+	F3_2412_2472,
+
+	F1_2412_2462,
+	F2_2412_2462,
+
+	F1_2432_2442,
+
+	F1_2457_2472,
+
+	F1_2467_2472,
+
+	F1_2484_2484,
+	F2_2484_2484,
+
+	F1_2512_2732,
+
+	W1_2312_2372,
+	W1_2412_2412,
+	W1_2417_2432,
+	W1_2437_2442,
+	W1_2447_2457,
+	W1_2462_2462,
+	W1_2467_2467,
+	W2_2467_2467,
+	W1_2472_2472,
+	W2_2472_2472,
+	W1_2484_2484,
+	W2_2484_2484,
+};
+
+static struct RegDmnFreqBand regDmn2GhzFreq[] = {
+	{2312, 2372, 5, 6, 20, 5, NO_DFS, NO_PSCAN, 0},
+	{2312, 2372, 20, 0, 20, 5, NO_DFS, NO_PSCAN, 0},
+
+	{2412, 2472, 5, 6, 20, 5, NO_DFS, NO_PSCAN, 0},
+	{2412, 2472, 20, 0, 20, 5, NO_DFS, PSCAN_MKKA, 0},
+	{2412, 2472, 30, 0, 20, 5, NO_DFS, NO_PSCAN, 0},
+
+	{2412, 2462, 27, 6, 20, 5, NO_DFS, NO_PSCAN, 0},
+	{2412, 2462, 20, 0, 20, 5, NO_DFS, PSCAN_MKKA, 0},
+
+	{2432, 2442, 20, 0, 20, 5, NO_DFS, NO_PSCAN, 0},
+
+	{2457, 2472, 20, 0, 20, 5, NO_DFS, NO_PSCAN, 0},
+
+	{2467, 2472, 20, 0, 20, 5, NO_DFS, PSCAN_MKKA2 | PSCAN_MKKA, 0},
+
+	{2484, 2484, 5, 6, 20, 5, NO_DFS, NO_PSCAN, 0},
+	{2484, 2484, 20, 0, 20, 5, NO_DFS,
+	 PSCAN_MKKA | PSCAN_MKKA1 | PSCAN_MKKA2, 0},
+
+	{2512, 2732, 5, 6, 20, 5, NO_DFS, NO_PSCAN, 0},
+
+	{2312, 2372, 20, 0, 20, 5, NO_DFS, NO_PSCAN, 0},
+	{2412, 2412, 20, 0, 20, 5, NO_DFS, NO_PSCAN, 0},
+	{2417, 2432, 20, 0, 20, 5, NO_DFS, NO_PSCAN, 0},
+	{2437, 2442, 20, 0, 20, 5, NO_DFS, NO_PSCAN, 0},
+	{2447, 2457, 20, 0, 20, 5, NO_DFS, NO_PSCAN, 0},
+	{2462, 2462, 20, 0, 20, 5, NO_DFS, NO_PSCAN, 0},
+	{2467, 2467, 20, 0, 20, 5, NO_DFS, PSCAN_WWR | IS_ECM_CHAN, 0},
+	{2467, 2467, 20, 0, 20, 5, NO_DFS, NO_PSCAN | IS_ECM_CHAN, 0},
+	{2472, 2472, 20, 0, 20, 5, NO_DFS, PSCAN_WWR | IS_ECM_CHAN, 0},
+	{2472, 2472, 20, 0, 20, 5, NO_DFS, NO_PSCAN | IS_ECM_CHAN, 0},
+	{2484, 2484, 20, 0, 20, 5, NO_DFS, PSCAN_WWR | IS_ECM_CHAN, 0},
+	{2484, 2484, 20, 0, 20, 5, NO_DFS, NO_PSCAN | IS_ECM_CHAN, 0},
+};
+
+enum {
+	G1_2312_2372,
+	G2_2312_2372,
+
+	G1_2412_2472,
+	G2_2412_2472,
+	G3_2412_2472,
+
+	G1_2412_2462,
+	G2_2412_2462,
+
+	G1_2432_2442,
+
+	G1_2457_2472,
+
+	G1_2512_2732,
+
+	G1_2467_2472,
+
+	WG1_2312_2372,
+	WG1_2412_2462,
+	WG1_2467_2472,
+	WG2_2467_2472,
+	G_DEMO_ALL_CHANNELS
+};
+
+static struct RegDmnFreqBand regDmn2Ghz11gFreq[] = {
+	{2312, 2372, 5, 6, 20, 5, NO_DFS, NO_PSCAN, 0},
+	{2312, 2372, 20, 0, 20, 5, NO_DFS, NO_PSCAN, 0},
+
+	{2412, 2472, 5, 6, 20, 5, NO_DFS, NO_PSCAN, 0},
+	{2412, 2472, 20, 0, 20, 5, NO_DFS, PSCAN_MKKA_G, 0},
+	{2412, 2472, 30, 0, 20, 5, NO_DFS, NO_PSCAN, 0},
+
+	{2412, 2462, 27, 6, 20, 5, NO_DFS, NO_PSCAN, 0},
+	{2412, 2462, 20, 0, 20, 5, NO_DFS, PSCAN_MKKA_G, 0},
+
+	{2432, 2442, 20, 0, 20, 5, NO_DFS, NO_PSCAN, 0},
+
+	{2457, 2472, 20, 0, 20, 5, NO_DFS, NO_PSCAN, 0},
+
+	{2512, 2732, 5, 6, 20, 5, NO_DFS, NO_PSCAN, 0},
+
+	{2467, 2472, 20, 0, 20, 5, NO_DFS, PSCAN_MKKA2 | PSCAN_MKKA, 0},
+
+	{2312, 2372, 20, 0, 20, 5, NO_DFS, NO_PSCAN, 0},
+	{2412, 2462, 20, 0, 20, 5, NO_DFS, NO_PSCAN, 0},
+	{2467, 2472, 20, 0, 20, 5, NO_DFS, PSCAN_WWR | IS_ECM_CHAN, 0},
+	{2467, 2472, 20, 0, 20, 5, NO_DFS, NO_PSCAN | IS_ECM_CHAN, 0},
+	{2312, 2732, 27, 6, 20, 5, NO_DFS, NO_PSCAN, 0},
+};
+
+enum {
+	T1_2312_2372,
+	T1_2437_2437,
+	T2_2437_2437,
+	T3_2437_2437,
+	T1_2512_2732
+};
+
+static struct regDomain regDomains[] = {
+
+	{DEBUG_REG_DMN, FCC, DFS_FCC3, NO_PSCAN, NO_REQ,
+	 BM(A_DEMO_ALL_CHANNELS, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1,
+	    -1),
+	 BM(T1_5130_5650, T1_5150_5670, -1, -1, -1, -1, -1, -1, -1, -1, -1,
+	    -1),
+	 BM(T1_5200_5240, T1_5280_5280, T1_5540_5660, T1_5765_5805, -1, -1,
+	    -1, -1, -1, -1, -1, -1),
+	 BM(F1_2312_2372, F1_2412_2472, F1_2484_2484, F1_2512_2732, -1, -1,
+	    -1, -1, -1, -1, -1, -1),
+	 BM(G_DEMO_ALL_CHANNELS, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1,
+	    -1),
+	 BM(T1_2312_2372, T1_2437_2437, T1_2512_2732, -1, -1, -1, -1, -1,
+	    -1, -1, -1, -1)},
+
+	{APL1, FCC, NO_DFS, NO_PSCAN, NO_REQ,
+	 BM(F4_5745_5825, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1),
+	 BM(T2_5760_5800, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1),
+	 BM(T1_5765_5805, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1),
+	 BMZERO,
+	 BMZERO,
+	 BMZERO},
+
+	{APL2, FCC, NO_DFS, NO_PSCAN, NO_REQ,
+	 BM(F1_5745_5805, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1),
+	 BM(T1_5760_5800, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1),
+	 BM(T2_5765_5805, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1),
+	 BMZERO,
+	 BMZERO,
+	 BMZERO},
+
+	{APL3, FCC, NO_DFS, NO_PSCAN, NO_REQ,
+	 BM(F1_5280_5320, F2_5745_5805, -1, -1, -1, -1, -1, -1, -1, -1, -1,
+	    -1),
+	 BM(T1_5290_5290, T1_5760_5800, -1, -1, -1, -1, -1, -1, -1, -1, -1,
+	    -1),
+	 BM(T1_5765_5805, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1),
+	 BMZERO,
+	 BMZERO,
+	 BMZERO},
+
+	{APL4, FCC, NO_DFS, NO_PSCAN, NO_REQ,
+	 BM(F4_5180_5240, F3_5745_5825, -1, -1, -1, -1, -1, -1, -1, -1, -1,
+	    -1),
+	 BM(T1_5210_5210, T3_5760_5800, -1, -1, -1, -1, -1, -1, -1, -1, -1,
+	    -1),
+	 BM(T1_5200_5200, T3_5765_5805, -1, -1, -1, -1, -1, -1, -1, -1, -1,
+	    -1),
+	 BMZERO,
+	 BMZERO,
+	 BMZERO},
+
+	{APL5, FCC, NO_DFS, NO_PSCAN, NO_REQ,
+	 BM(F2_5745_5825, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1),
+	 BM(T4_5760_5800, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1),
+	 BM(T4_5765_5805, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1),
+	 BMZERO,
+	 BMZERO,
+	 BMZERO},
+
+	{APL6, ETSI, DFS_ETSI, PSCAN_FCC_T | PSCAN_FCC, NO_REQ,
+	 BM(F4_5180_5240, F2_5260_5320, F3_5745_5825, -1, -1, -1, -1, -1,
+	    -1, -1, -1, -1),
+	 BM(T2_5210_5210, T1_5250_5290, T1_5760_5800, -1, -1, -1, -1, -1,
+	    -1, -1, -1, -1),
+	 BM(T1_5200_5280, T5_5765_5805, -1, -1, -1, -1, -1, -1, -1, -1, -1,
+	    -1),
+	 BMZERO,
+	 BMZERO,
+	 BMZERO},
+
+	{APL7, ETSI, DFS_ETSI, PSCAN_ETSI, NO_REQ,
+	 BM(F1_5280_5320, F5_5500_5700, F3_5745_5805, -1, -1, -1, -1, -1,
+	    -1, -1, -1, -1),
+	 BM(T3_5290_5290, T5_5760_5800, -1, -1, -1, -1, -1, -1, -1, -1, -1,
+	    -1),
+	 BM(T1_5540_5660, T6_5765_5805, -1, -1, -1, -1, -1, -1, -1, -1, -1,
+	    -1),
+	 BMZERO,
+	 BMZERO,
+	 BMZERO},
+
+	{APL8, ETSI, NO_DFS, NO_PSCAN,
+	 DISALLOW_ADHOC_11A | DISALLOW_ADHOC_11A_TURB,
+	 BM(F6_5260_5320, F4_5745_5825, -1, -1, -1, -1, -1, -1, -1, -1, -1,
+	    -1),
+	 BM(T2_5290_5290, T2_5760_5800, -1, -1, -1, -1, -1, -1, -1, -1, -1,
+	    -1),
+	 BM(T1_5280_5280, T1_5765_5805, -1, -1, -1, -1, -1, -1, -1, -1, -1,
+	    -1),
+	 BMZERO,
+	 BMZERO,
+	 BMZERO},
+
+	{APL9, ETSI, DFS_ETSI, PSCAN_ETSI,
+	 DISALLOW_ADHOC_11A | DISALLOW_ADHOC_11A_TURB,
+	 BM(F1_5180_5320, F1_5500_5620, F3_5745_5805, -1, -1, -1, -1, -1,
+	    -1, -1, -1, -1),
+	 BM(T3_5290_5290, T5_5760_5800, -1, -1, -1, -1, -1, -1, -1, -1, -1,
+	    -1),
+	 BM(T1_5540_5660, T6_5765_5805, -1, -1, -1, -1, -1, -1, -1, -1, -1,
+	    -1),
+	 BMZERO,
+	 BMZERO,
+	 BMZERO},
+
+	{APL10, ETSI, DFS_ETSI, PSCAN_ETSI,
+	 DISALLOW_ADHOC_11A | DISALLOW_ADHOC_11A_TURB,
+	 BM(F1_5180_5320, F5_5500_5700, F3_5745_5805, -1, -1, -1, -1, -1,
+	    -1, -1, -1, -1),
+	 BM(T3_5290_5290, T5_5760_5800, -1, -1, -1, -1, -1, -1, -1, -1, -1,
+	    -1),
+	 BM(T1_5540_5660, T6_5765_5805, -1, -1, -1, -1, -1, -1, -1, -1, -1,
+	    -1),
+	 BMZERO,
+	 BMZERO,
+	 BMZERO},
+
+	{ETSI1, ETSI, DFS_ETSI, PSCAN_ETSI,
+	 DISALLOW_ADHOC_11A | DISALLOW_ADHOC_11A_TURB,
+	 BM(F4_5180_5240, F2_5260_5320, F2_5500_5700, -1, -1, -1, -1, -1,
+	    -1, -1, -1, -1),
+	 BM(T1_5210_5290, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1),
+	 BM(T2_5200_5280, T2_5540_5660, -1, -1, -1, -1, -1, -1, -1, -1, -1,
+	    -1),
+	 BMZERO,
+	 BMZERO,
+	 BMZERO},
+
+	{ETSI2, ETSI, DFS_ETSI, PSCAN_ETSI,
+	 DISALLOW_ADHOC_11A | DISALLOW_ADHOC_11A_TURB,
+	 BM(F3_5180_5240, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1),
+	 BM(T3_5210_5210, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1),
+	 BM(T2_5200_5200, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1),
+	 BMZERO,
+	 BMZERO,
+	 BMZERO},
+
+	{ETSI3, ETSI, DFS_ETSI, PSCAN_ETSI,
+	 DISALLOW_ADHOC_11A | DISALLOW_ADHOC_11A_TURB,
+	 BM(F4_5180_5240, F2_5260_5320, -1, -1, -1, -1, -1, -1, -1, -1, -1,
+	    -1),
+	 BM(T1_5210_5290, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1),
+	 BM(T2_5200_5280, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1),
+	 BMZERO,
+	 BMZERO,
+	 BMZERO},
+
+	{ETSI4, ETSI, DFS_ETSI, PSCAN_ETSI,
+	 DISALLOW_ADHOC_11A | DISALLOW_ADHOC_11A_TURB,
+	 BM(F3_5180_5240, F1_5260_5320, -1, -1, -1, -1, -1, -1, -1, -1, -1,
+	    -1),
+	 BM(T2_5210_5290, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1),
+	 BM(T3_5200_5280, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1),
+	 BMZERO,
+	 BMZERO,
+	 BMZERO},
+
+	{ETSI5, ETSI, DFS_ETSI, PSCAN_ETSI,
+	 DISALLOW_ADHOC_11A | DISALLOW_ADHOC_11A_TURB,
+	 BM(F1_5180_5240, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1),
+	 BM(T4_5210_5210, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1),
+	 BM(T3_5200_5200, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1),
+	 BMZERO,
+	 BMZERO,
+	 BMZERO},
+
+	{ETSI6, ETSI, DFS_ETSI, PSCAN_ETSI,
+	 DISALLOW_ADHOC_11A | DISALLOW_ADHOC_11A_TURB,
+	 BM(F5_5180_5240, F1_5260_5280, F3_5500_5700, -1, -1, -1, -1, -1,
+	    -1, -1, -1, -1),
+	 BM(T1_5210_5250, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1),
+	 BM(T4_5200_5280, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1),
+	 BMZERO,
+	 BMZERO,
+	 BMZERO},
+
+	{FCC1, FCC, NO_DFS, NO_PSCAN, NO_REQ,
+	 BM(F2_5180_5240, F4_5260_5320, F5_5745_5825, -1, -1, -1, -1, -1,
+	    -1, -1, -1, -1),
+	 BM(T6_5210_5210, T2_5250_5290, T6_5760_5800, -1, -1, -1, -1, -1,
+	    -1, -1, -1, -1),
+	 BM(T1_5200_5240, T2_5280_5280, T7_5765_5805, -1, -1, -1, -1, -1,
+	    -1, -1, -1, -1),
+	 BMZERO,
+	 BMZERO,
+	 BMZERO},
+
+	{FCC2, FCC, NO_DFS, NO_PSCAN, NO_REQ,
+	 BM(F6_5180_5240, F5_5260_5320, F6_5745_5825, -1, -1, -1, -1, -1,
+	    -1, -1, -1, -1),
+	 BM(T7_5210_5210, T3_5250_5290, T2_5760_5800, -1, -1, -1, -1, -1,
+	    -1, -1, -1, -1),
+	 BM(T7_5200_5200, T1_5240_5240, T2_5280_5280, T1_5765_5805, -1, -1,
+	    -1, -1, -1, -1, -1, -1),
+	 BMZERO,
+	 BMZERO,
+	 BMZERO},
+
+	{FCC3, FCC, DFS_FCC3, PSCAN_FCC | PSCAN_FCC_T, NO_REQ,
+	 BM(F2_5180_5240, F3_5260_5320, F1_5500_5700, F5_5745_5825, -1, -1,
+	    -1, -1, -1, -1, -1, -1),
+	 BM(T6_5210_5210, T2_5760_5800, -1, -1, -1, -1, -1, -1, -1, -1, -1,
+	    -1),
+	 BM(T4_5200_5200, T8_5765_5805, -1, -1, -1, -1, -1, -1, -1, -1, -1,
+	    -1),
+	 BMZERO,
+	 BMZERO,
+	 BMZERO},
+
+	{FCC4, FCC, DFS_FCC3, PSCAN_FCC | PSCAN_FCC_T, NO_REQ,
+	 BM(F1_4942_4987, F1_4945_4985, F1_4950_4980, -1, -1, -1, -1, -1,
+	    -1, -1, -1, -1),
+	 BM(T8_5210_5210, T4_5250_5290, T7_5760_5800, -1, -1, -1, -1, -1,
+	    -1, -1, -1, -1),
+	 BM(T1_5200_5240, T1_5280_5280, T9_5765_5805, -1, -1, -1, -1, -1,
+	    -1, -1, -1, -1),
+	 BMZERO,
+	 BMZERO,
+	 BMZERO},
+
+	{FCC5, FCC, NO_DFS, NO_PSCAN, NO_REQ,
+	 BM(F2_5180_5240, F6_5745_5825, -1, -1, -1, -1, -1, -1, -1, -1, -1,
+	    -1),
+	 BM(T6_5210_5210, T2_5760_5800, -1, -1, -1, -1, -1, -1, -1, -1, -1,
+	    -1),
+	 BM(T8_5200_5200, T7_5765_5805, -1, -1, -1, -1, -1, -1, -1, -1, -1,
+	    -1),
+	 BMZERO,
+	 BMZERO,
+	 BMZERO},
+
+	{FCC6, FCC, DFS_FCC3, PSCAN_FCC, NO_REQ,
+	 BM(F8_5180_5240, F5_5260_5320, F1_5500_5580, F1_5660_5700,
+	    F6_5745_5825, -1, -1, -1, -1, -1, -1, -1),
+	 BM(T7_5210_5210, T3_5250_5290, T2_5760_5800, -1, -1, -1, -1, -1,
+	    -1, -1, -1, -1),
+	 BM(T7_5200_5200, T1_5240_5240, T2_5280_5280, T1_5765_5805, -1, -1,
+	    -1, -1, -1, -1, -1, -1),
+	 BMZERO,
+	 BMZERO,
+	 BMZERO},
+
+	{MKK1, MKK, NO_DFS, PSCAN_MKK1, DISALLOW_ADHOC_11A_TURB,
+	 BM(F1_5170_5230, F4_5180_5240, F2_5260_5320, F4_5500_5700, -1, -1,
+	    -1, -1, -1, -1, -1, -1),
+	 BM(T7_5210_5210, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1),
+	 BM(T5_5200_5200, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1),
+	 BMZERO,
+	 BMZERO,
+	 BMZERO},
+
+	{MKK2, MKK, NO_DFS, PSCAN_MKK2, DISALLOW_ADHOC_11A_TURB,
+	 BM(F1_4915_4925, F1_4935_4945, F1_4920_4980, F1_5035_5040,
+	    F1_5055_5055, F1_5040_5080, F1_5170_5230, F4_5180_5240,
+	    F2_5260_5320, F4_5500_5700, -1, -1),
+	 BM(T7_5210_5210, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1),
+	 BM(T5_5200_5200, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1),
+	 BMZERO,
+	 BMZERO,
+	 BMZERO},
+
+
+	{MKK3, MKK, NO_DFS, PSCAN_MKK3, DISALLOW_ADHOC_11A_TURB,
+	 BM(F4_5180_5240, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1),
+	 BM(T9_5210_5210, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1),
+	 BM(T1_5200_5200, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1),
+	 BMZERO,
+	 BMZERO,
+	 BMZERO},
+
+
+	{MKK4, MKK, DFS_MKK4, PSCAN_MKK3, DISALLOW_ADHOC_11A_TURB,
+	 BM(F4_5180_5240, F2_5260_5320, -1, -1, -1, -1, -1, -1, -1, -1, -1,
+	    -1),
+	 BM(T10_5210_5210, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1),
+	 BM(T6_5200_5200, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1),
+	 BMZERO,
+	 BMZERO,
+	 BMZERO},
+
+
+	{MKK5, MKK, DFS_MKK4, PSCAN_MKK3, DISALLOW_ADHOC_11A_TURB,
+	 BM(F4_5180_5240, F2_5260_5320, F4_5500_5700, -1, -1, -1, -1, -1,
+	    -1, -1, -1, -1),
+	 BM(T3_5210_5290, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1),
+	 BM(T5_5200_5280, T3_5540_5660, -1, -1, -1, -1, -1, -1, -1, -1, -1,
+	    -1),
+	 BMZERO,
+	 BMZERO,
+	 BMZERO},
+
+
+	{MKK6, MKK, NO_DFS, PSCAN_MKK1, DISALLOW_ADHOC_11A_TURB,
+	 BM(F2_5170_5230, F4_5180_5240, -1, -1, -1, -1, -1, -1, -1, -1, -1,
+	    -1),
+	 BM(T3_5210_5210, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1),
+	 BM(T6_5200_5200, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1),
+	 BMZERO,
+	 BMZERO,
+	 BMZERO},
+
+
+	{MKK7, MKK, DFS_MKK4, PSCAN_MKK1 | PSCAN_MKK3,
+	 DISALLOW_ADHOC_11A_TURB,
+	 BM(F1_5170_5230, F4_5180_5240, F2_5260_5320, -1, -1, -1, -1, -1,
+	    -1, -1, -1, -1),
+	 BM(T3_5210_5290, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1),
+	 BM(T5_5200_5280, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1),
+	 BMZERO,
+	 BMZERO,
+	 BMZERO},
+
+
+	{MKK8, MKK, DFS_MKK4, PSCAN_MKK1 | PSCAN_MKK3,
+	 DISALLOW_ADHOC_11A_TURB,
+	 BM(F1_5170_5230, F4_5180_5240, F2_5260_5320, F4_5500_5700, -1, -1,
+	    -1, -1, -1, -1, -1, -1),
+	 BM(T3_5210_5290, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1),
+	 BM(T5_5200_5280, T3_5540_5660, -1, -1, -1, -1, -1, -1, -1, -1, -1,
+	    -1),
+	 BMZERO,
+	 BMZERO,
+	 BMZERO},
+
+
+	{MKK9, MKK, NO_DFS, PSCAN_MKK2 | PSCAN_MKK3,
+	 DISALLOW_ADHOC_11A_TURB,
+	 BM(F1_4915_4925, F1_4935_4945, F1_4920_4980, F1_5035_5040,
+	    F1_5055_5055, F1_5040_5080, F4_5180_5240, -1, -1, -1, -1, -1),
+	 BM(T9_5210_5210, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1),
+	 BM(T1_5200_5200, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1),
+	 BMZERO,
+	 BMZERO,
+	 BMZERO},
+
+
+	{MKK10, MKK, DFS_MKK4, PSCAN_MKK2 | PSCAN_MKK3,
+	 DISALLOW_ADHOC_11A_TURB,
+	 BM(F1_4915_4925, F1_4935_4945, F1_4920_4980, F1_5035_5040,
+	    F1_5055_5055, F1_5040_5080, F4_5180_5240, F2_5260_5320, -1, -1,
+	    -1, -1),
+	 BM(T3_5210_5290, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1),
+	 BM(T1_5200_5280, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1),
+	 BMZERO,
+	 BMZERO,
+	 BMZERO},
+
+
+	{MKK11, MKK, DFS_MKK4, PSCAN_MKK3, DISALLOW_ADHOC_11A_TURB,
+	 BM(F1_4915_4925, F1_4935_4945, F1_4920_4980, F1_5035_5040,
+	    F1_5055_5055, F1_5040_5080, F4_5180_5240, F2_5260_5320,
+	    F4_5500_5700, -1, -1, -1),
+	 BM(T3_5210_5290, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1),
+	 BM(T1_5200_5280, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1),
+	 BMZERO,
+	 BMZERO,
+	 BMZERO},
+
+
+	{MKK12, MKK, DFS_MKK4, PSCAN_MKK1 | PSCAN_MKK3,
+	 DISALLOW_ADHOC_11A_TURB,
+	 BM(F1_4915_4925, F1_4935_4945, F1_4920_4980, F1_5035_5040,
+	    F1_5055_5055, F1_5040_5080, F1_5170_5230, F4_5180_5240,
+	    F2_5260_5320, F4_5500_5700, -1, -1),
+	 BM(T3_5210_5290, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1),
+	 BM(T1_5200_5280, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1),
+	 BMZERO,
+	 BMZERO,
+	 BMZERO},
+
+
+	{MKK13, MKK, DFS_MKK4, PSCAN_MKK1 | PSCAN_MKK3,
+	 DISALLOW_ADHOC_11A | DISALLOW_ADHOC_11A_TURB,
+	 BM(F1_5170_5230, F7_5180_5240, F2_5260_5320, F4_5500_5700, -1, -1,
+	    -1, -1, -1, -1, -1, -1),
+	 BMZERO,
+	 BMZERO,
+	 BMZERO,
+	 BMZERO,
+	 BMZERO},
+
+
+	{MKK14, MKK, DFS_MKK4, PSCAN_MKK1, DISALLOW_ADHOC_11A_TURB,
+	 BM(F1_4915_4925, F1_4935_4945, F1_4920_4980, F1_5035_5040,
+	    F1_5040_5080, F1_5055_5055, F1_5170_5230, F4_5180_5240, -1, -1,
+	    -1, -1),
+	 BMZERO,
+	 BMZERO,
+	 BMZERO,
+	 BMZERO,
+	 BMZERO},
+
+
+	{MKK15, MKK, DFS_MKK4, PSCAN_MKK1, DISALLOW_ADHOC_11A_TURB,
+	 BM(F1_4915_4925, F1_4935_4945, F1_4920_4980, F1_5035_5040,
+	    F1_5040_5080, F1_5055_5055, F1_5170_5230, F4_5180_5240,
+	    F2_5260_5320, -1, -1, -1),
+	 BMZERO,
+	 BMZERO,
+	 BMZERO,
+	 BMZERO,
+	 BMZERO},
+
+
+	{APLD, NO_CTL, NO_DFS, NO_PSCAN, NO_REQ,
+	 BMZERO,
+	 BMZERO,
+	 BMZERO,
+	 BM(F2_2312_2372, F2_2412_2472, -1, -1, -1, -1, -1, -1, -1, -1, -1,
+	    -1),
+	 BM(G2_2312_2372, G2_2412_2472, -1, -1, -1, -1, -1, -1, -1, -1, -1,
+	    -1),
+	 BMZERO},
+
+	{ETSIA, NO_CTL, NO_DFS, PSCAN_ETSIA,
+	 DISALLOW_ADHOC_11A | DISALLOW_ADHOC_11A_TURB,
+	 BMZERO,
+	 BMZERO,
+	 BMZERO,
+	 BM(F1_2457_2472, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1),
+	 BM(G1_2457_2472, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1),
+	 BM(T2_2437_2437, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1)},
+
+	{ETSIB, ETSI, NO_DFS, PSCAN_ETSIB,
+	 DISALLOW_ADHOC_11A | DISALLOW_ADHOC_11A_TURB,
+	 BMZERO,
+	 BMZERO,
+	 BMZERO,
+	 BM(F1_2432_2442, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1),
+	 BM(G1_2432_2442, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1),
+	 BM(T2_2437_2437, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1)},
+
+	{ETSIC, ETSI, NO_DFS, PSCAN_ETSIC,
+	 DISALLOW_ADHOC_11A | DISALLOW_ADHOC_11A_TURB,
+	 BMZERO,
+	 BMZERO,
+	 BMZERO,
+	 BM(F3_2412_2472, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1),
+	 BM(G3_2412_2472, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1),
+	 BM(T2_2437_2437, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1)},
+
+	{FCCA, FCC, NO_DFS, NO_PSCAN, NO_REQ,
+	 BMZERO,
+	 BMZERO,
+	 BMZERO,
+	 BM(F1_2412_2462, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1),
+	 BM(G1_2412_2462, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1),
+	 BM(T2_2437_2437, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1)},
+
+	{MKKA, MKK, NO_DFS,
+	 PSCAN_MKKA | PSCAN_MKKA_G | PSCAN_MKKA1 | PSCAN_MKKA1_G |
+	 PSCAN_MKKA2 | PSCAN_MKKA2_G, DISALLOW_ADHOC_11A_TURB,
+	 BMZERO,
+	 BMZERO,
+	 BMZERO,
+	 BM(F2_2412_2462, F1_2467_2472, F2_2484_2484, -1, -1, -1, -1, -1,
+	    -1, -1, -1, -1),
+	 BM(G2_2412_2462, G1_2467_2472, -1, -1, -1, -1, -1, -1, -1, -1, -1,
+	    -1),
+	 BM(T2_2437_2437, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1)},
+
+	{MKKC, MKK, NO_DFS, NO_PSCAN, NO_REQ,
+	 BMZERO,
+	 BMZERO,
+	 BMZERO,
+	 BM(F2_2412_2472, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1),
+	 BM(G2_2412_2472, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1),
+	 BM(T2_2437_2437, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1)},
+
+	{WORLD, ETSI, NO_DFS, NO_PSCAN, NO_REQ,
+	 BMZERO,
+	 BMZERO,
+	 BMZERO,
+	 BM(F2_2412_2472, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1),
+	 BM(G2_2412_2472, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1),
+	 BM(T2_2437_2437, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1)},
+
+	{WOR0_WORLD, NO_CTL, DFS_FCC3 | DFS_ETSI, PSCAN_WWR, ADHOC_PER_11D,
+	 BM(W1_5260_5320, W1_5180_5240, W1_5170_5230, W1_5745_5825,
+	    W1_5500_5700, -1, -1, -1, -1, -1, -1, -1),
+	 BM(WT1_5210_5250, WT1_5290_5290, WT1_5760_5800, -1, -1, -1, -1,
+	    -1, -1, -1, -1, -1),
+	 BMZERO,
+	 BM(W1_2412_2412, W1_2437_2442, W1_2462_2462, W1_2472_2472,
+	    W1_2417_2432, W1_2447_2457, W1_2467_2467, W1_2484_2484, -1, -1,
+	    -1, -1),
+	 BM(WG1_2412_2462, WG1_2467_2472, -1, -1, -1, -1, -1, -1, -1, -1,
+	    -1, -1),
+	 BM(T3_2437_2437, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1)},
+
+	{WOR01_WORLD, NO_CTL, DFS_FCC3 | DFS_ETSI, PSCAN_WWR,
+	 ADHOC_PER_11D,
+	 BM(W1_5260_5320, W1_5180_5240, W1_5170_5230, W1_5745_5825,
+	    W1_5500_5700, -1, -1, -1, -1, -1, -1, -1),
+	 BM(WT1_5210_5250, WT1_5290_5290, WT1_5760_5800, -1, -1, -1, -1,
+	    -1, -1, -1, -1, -1),
+	 BMZERO,
+	 BM(W1_2412_2412, W1_2437_2442, W1_2462_2462, W1_2417_2432,
+	    W1_2447_2457, -1, -1, -1, -1, -1, -1, -1),
+	 BM(WG1_2412_2462, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1),
+	 BM(T3_2437_2437, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1)},
+
+	{WOR02_WORLD, NO_CTL, DFS_FCC3 | DFS_ETSI, PSCAN_WWR,
+	 ADHOC_PER_11D,
+	 BM(W1_5260_5320, W1_5180_5240, W1_5170_5230, W1_5745_5825,
+	    W1_5500_5700, -1, -1, -1, -1, -1, -1, -1),
+	 BM(WT1_5210_5250, WT1_5290_5290, WT1_5760_5800, -1, -1, -1, -1,
+	    -1, -1, -1, -1, -1),
+	 BMZERO,
+	 BM(W1_2412_2412, W1_2437_2442, W1_2462_2462, W1_2472_2472,
+	    W1_2417_2432, W1_2447_2457, W1_2467_2467, -1, -1, -1, -1, -1),
+	 BM(WG1_2412_2462, WG1_2467_2472, -1, -1, -1, -1, -1, -1, -1, -1,
+	    -1, -1),
+	 BM(T3_2437_2437, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1)},
+
+	{EU1_WORLD, NO_CTL, DFS_FCC3 | DFS_ETSI, PSCAN_WWR, ADHOC_PER_11D,
+	 BM(W1_5260_5320, W1_5180_5240, W1_5170_5230, W1_5745_5825,
+	    W1_5500_5700, -1, -1, -1, -1, -1, -1, -1),
+	 BM(WT1_5210_5250, WT1_5290_5290, WT1_5760_5800, -1, -1, -1, -1,
+	    -1, -1, -1, -1, -1),
+	 BMZERO,
+	 BM(W1_2412_2412, W1_2437_2442, W1_2462_2462, W2_2472_2472,
+	    W1_2417_2432, W1_2447_2457, W2_2467_2467, -1, -1, -1, -1, -1),
+	 BM(WG1_2412_2462, WG2_2467_2472, -1, -1, -1, -1, -1, -1, -1, -1,
+	    -1, -1),
+	 BM(T3_2437_2437, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1)},
+
+	{WOR1_WORLD, NO_CTL, DFS_FCC3 | DFS_ETSI, PSCAN_WWR, ADHOC_NO_11A,
+	 BM(W1_5260_5320, W1_5180_5240, W1_5170_5230, W1_5745_5825,
+	    W1_5500_5700, -1, -1, -1, -1, -1, -1, -1),
+	 BMZERO,
+	 BMZERO,
+	 BM(W1_2412_2412, W1_2437_2442, W1_2462_2462, W1_2472_2472,
+	    W1_2417_2432, W1_2447_2457, W1_2467_2467, W1_2484_2484, -1, -1,
+	    -1, -1),
+	 BM(WG1_2412_2462, WG1_2467_2472, -1, -1, -1, -1, -1, -1, -1, -1,
+	    -1, -1),
+	 BM(T3_2437_2437, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1)},
+
+	{WOR2_WORLD, NO_CTL, DFS_FCC3 | DFS_ETSI, PSCAN_WWR, ADHOC_NO_11A,
+	 BM(W1_5260_5320, W1_5180_5240, W1_5170_5230, W1_5745_5825,
+	    W1_5500_5700, -1, -1, -1, -1, -1, -1, -1),
+	 BM(WT1_5210_5250, WT1_5290_5290, WT1_5760_5800, -1, -1, -1, -1,
+	    -1, -1, -1, -1, -1),
+	 BMZERO,
+	 BM(W1_2412_2412, W1_2437_2442, W1_2462_2462, W1_2472_2472,
+	    W1_2417_2432, W1_2447_2457, W1_2467_2467, W1_2484_2484, -1, -1,
+	    -1, -1),
+	 BM(WG1_2412_2462, WG1_2467_2472, -1, -1, -1, -1, -1, -1, -1, -1,
+	    -1, -1),
+	 BM(T3_2437_2437, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1)},
+
+	{WOR3_WORLD, NO_CTL, DFS_FCC3 | DFS_ETSI, PSCAN_WWR, ADHOC_PER_11D,
+	 BM(W1_5260_5320, W1_5180_5240, W1_5170_5230, W1_5745_5825, -1, -1,
+	    -1, -1, -1, -1, -1, -1),
+	 BM(WT1_5210_5250, WT1_5290_5290, WT1_5760_5800, -1, -1, -1, -1,
+	    -1, -1, -1, -1, -1),
+	 BMZERO,
+	 BM(W1_2412_2412, W1_2437_2442, W1_2462_2462, W1_2472_2472,
+	    W1_2417_2432, W1_2447_2457, W1_2467_2467, -1, -1, -1, -1, -1),
+	 BM(WG1_2412_2462, WG2_2467_2472, -1, -1, -1, -1, -1, -1, -1, -1,
+	    -1, -1),
+	 BM(T3_2437_2437, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1)},
+
+	{WOR4_WORLD, NO_CTL, DFS_FCC3 | DFS_ETSI, PSCAN_WWR, ADHOC_NO_11A,
+	 BM(W1_5260_5320, W1_5180_5240, W1_5745_5825, -1, -1, -1, -1, -1,
+	    -1, -1, -1, -1),
+	 BM(WT1_5210_5250, WT1_5290_5290, WT1_5760_5800, -1, -1, -1, -1,
+	    -1, -1, -1, -1, -1),
+	 BMZERO,
+	 BM(W1_2412_2412, W1_2437_2442, W1_2462_2462, W1_2417_2432,
+	    W1_2447_2457, -1, -1, -1, -1, -1, -1, -1),
+	 BM(WG1_2412_2462, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1),
+	 BM(T3_2437_2437, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1)},
+
+	{WOR5_ETSIC, NO_CTL, DFS_FCC3 | DFS_ETSI, PSCAN_WWR, ADHOC_NO_11A,
+	 BM(W1_5260_5320, W1_5180_5240, W1_5745_5825, -1, -1, -1, -1, -1,
+	    -1, -1, -1, -1),
+	 BMZERO,
+	 BMZERO,
+	 BM(W1_2412_2412, W1_2437_2442, W1_2462_2462, W1_2472_2472,
+	    W1_2417_2432, W1_2447_2457, W1_2467_2467, -1, -1, -1, -1, -1),
+	 BM(WG1_2412_2462, WG1_2467_2472, -1, -1, -1, -1, -1, -1, -1, -1,
+	    -1, -1),
+	 BM(T3_2437_2437, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1)},
+
+	{WOR9_WORLD, NO_CTL, DFS_FCC3 | DFS_ETSI, PSCAN_WWR, ADHOC_NO_11A,
+	 BM(W1_5260_5320, W1_5180_5240, W1_5745_5825, W1_5500_5700, -1, -1,
+	    -1, -1, -1, -1, -1, -1),
+	 BM(WT1_5210_5250, WT1_5290_5290, WT1_5760_5800, -1, -1, -1, -1,
+	    -1, -1, -1, -1, -1),
+	 BMZERO,
+	 BM(W1_2412_2412, W1_2437_2442, W1_2462_2462, W1_2417_2432,
+	    W1_2447_2457, -1, -1, -1, -1, -1, -1, -1),
+	 BM(WG1_2412_2462, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1),
+	 BM(T3_2437_2437, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1)},
+
+	{WORA_WORLD, NO_CTL, DFS_FCC3 | DFS_ETSI, PSCAN_WWR, ADHOC_NO_11A,
+	 BM(W1_5260_5320, W1_5180_5240, W1_5745_5825, W1_5500_5700, -1, -1,
+	    -1, -1, -1, -1, -1, -1),
+	 BMZERO,
+	 BMZERO,
+	 BM(W1_2412_2412, W1_2437_2442, W1_2462_2462, W1_2472_2472,
+	    W1_2417_2432, W1_2447_2457, W1_2467_2467, -1, -1, -1, -1, -1),
+	 BM(WG1_2412_2462, WG1_2467_2472, -1, -1, -1, -1, -1, -1, -1, -1,
+	    -1, -1),
+	 BM(T3_2437_2437, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1)},
+
+	{WORB_WORLD, NO_CTL, DFS_FCC3 | DFS_ETSI, PSCAN_WWR, ADHOC_NO_11A,
+	 BM(W1_5260_5320, W1_5180_5240, W1_5500_5700, -1, -1, -1, -1, -1,
+	    -1, -1, -1, -1),
+	 BMZERO,
+	 BMZERO,
+	 BM(W1_2412_2412, W1_2437_2442, W1_2462_2462, W1_2472_2472,
+	    W1_2417_2432, W1_2447_2457, W1_2467_2467, -1, -1, -1, -1, -1),
+	 BM(WG1_2412_2462, WG1_2467_2472, -1, -1, -1, -1, -1, -1, -1, -1,
+	    -1, -1),
+	 BM(T3_2437_2437, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1)},
+
+	{NULL1, NO_CTL, NO_DFS, NO_PSCAN, NO_REQ,
+	 BMZERO,
+	 BMZERO,
+	 BMZERO,
+	 BMZERO,
+	 BMZERO,
+	 BMZERO}
+};
+
+static const struct cmode modes[] = {
+	{ATH9K_MODE_11A, CHANNEL_A},
+	{ATH9K_MODE_11B, CHANNEL_B},
+	{ATH9K_MODE_11G, CHANNEL_G},
+	{ATH9K_MODE_11NG_HT20, CHANNEL_G_HT20},
+	{ATH9K_MODE_11NG_HT40PLUS, CHANNEL_G_HT40PLUS},
+	{ATH9K_MODE_11NG_HT40MINUS, CHANNEL_G_HT40MINUS},
+	{ATH9K_MODE_11NA_HT20, CHANNEL_A_HT20},
+	{ATH9K_MODE_11NA_HT40PLUS, CHANNEL_A_HT40PLUS},
+	{ATH9K_MODE_11NA_HT40MINUS, CHANNEL_A_HT40MINUS},
+};
+
+static struct japan_bandcheck j_bandcheck[] = {
+	{F1_5170_5230, AR_EEPROM_EEREGCAP_EN_KK_U1_ODD},
+	{F4_5180_5240, AR_EEPROM_EEREGCAP_EN_KK_U1_EVEN},
+	{F2_5260_5320, AR_EEPROM_EEREGCAP_EN_KK_U2},
+	{F4_5500_5700, AR_EEPROM_EEREGCAP_EN_KK_MIDBAND}
+};
+
+
+#endif
diff --git a/drivers/net/wireless/ath9k/xmit.c b/drivers/net/wireless/ath9k/xmit.c
new file mode 100644
index 000000000000..550129f717e2
--- /dev/null
+++ b/drivers/net/wireless/ath9k/xmit.c
@@ -0,0 +1,2871 @@
+/*
+ * Copyright (c) 2008 Atheros Communications Inc.
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+/*
+ * Implementation of transmit path.
+ */
+
+#include "core.h"
+
+#define BITS_PER_BYTE           8
+#define OFDM_PLCP_BITS          22
+#define HT_RC_2_MCS(_rc)        ((_rc) & 0x0f)
+#define HT_RC_2_STREAMS(_rc)    ((((_rc) & 0x78) >> 3) + 1)
+#define L_STF                   8
+#define L_LTF                   8
+#define L_SIG                   4
+#define HT_SIG                  8
+#define HT_STF                  4
+#define HT_LTF(_ns)             (4 * (_ns))
+#define SYMBOL_TIME(_ns)        ((_ns) << 2) /* ns * 4 us */
+#define SYMBOL_TIME_HALFGI(_ns) (((_ns) * 18 + 4) / 5)  /* ns * 3.6 us */
+#define NUM_SYMBOLS_PER_USEC(_usec) (_usec >> 2)
+#define NUM_SYMBOLS_PER_USEC_HALFGI(_usec) (((_usec*5)-4)/18)
+
+#define OFDM_SIFS_TIME    	    16
+
+static u32 bits_per_symbol[][2] = {
+	/* 20MHz 40MHz */
+	{    26,   54 },     /*  0: BPSK */
+	{    52,  108 },     /*  1: QPSK 1/2 */
+	{    78,  162 },     /*  2: QPSK 3/4 */
+	{   104,  216 },     /*  3: 16-QAM 1/2 */
+	{   156,  324 },     /*  4: 16-QAM 3/4 */
+	{   208,  432 },     /*  5: 64-QAM 2/3 */
+	{   234,  486 },     /*  6: 64-QAM 3/4 */
+	{   260,  540 },     /*  7: 64-QAM 5/6 */
+	{    52,  108 },     /*  8: BPSK */
+	{   104,  216 },     /*  9: QPSK 1/2 */
+	{   156,  324 },     /* 10: QPSK 3/4 */
+	{   208,  432 },     /* 11: 16-QAM 1/2 */
+	{   312,  648 },     /* 12: 16-QAM 3/4 */
+	{   416,  864 },     /* 13: 64-QAM 2/3 */
+	{   468,  972 },     /* 14: 64-QAM 3/4 */
+	{   520, 1080 },     /* 15: 64-QAM 5/6 */
+};
+
+#define IS_HT_RATE(_rate)     ((_rate) & 0x80)
+
+/*
+ * Insert a chain of ath_buf (descriptors) on a multicast txq
+ * but do NOT start tx DMA on this queue.
+ * NB: must be called with txq lock held
+ */
+
+static void ath_tx_mcastqaddbuf(struct ath_softc *sc,
+				struct ath_txq *txq,
+				struct list_head *head)
+{
+	struct ath_hal *ah = sc->sc_ah;
+	struct ath_buf *bf;
+
+	if (list_empty(head))
+		return;
+
+	/*
+	 * Insert the frame on the outbound list and
+	 * pass it on to the hardware.
+	 */
+	bf = list_first_entry(head, struct ath_buf, list);
+
+	/*
+	 * The CAB queue is started from the SWBA handler since
+	 * frames only go out on DTIM and to avoid possible races.
+	 */
+	ath9k_hw_set_interrupts(ah, 0);
+
+	/*
+	 * If there is anything in the mcastq, we want to set
+	 * the "more data" bit in the last item in the queue to
+	 * indicate that there is "more data". It makes sense to add
+	 * it here since you are *always* going to have
+	 * more data when adding to this queue, no matter where
+	 * you call from.
+	 */
+
+	if (txq->axq_depth) {
+		struct ath_buf *lbf;
+		struct ieee80211_hdr *hdr;
+
+		/*
+		 * Add the "more data flag" to the last frame
+		 */
+
+		lbf = list_entry(txq->axq_q.prev, struct ath_buf, list);
+		hdr = (struct ieee80211_hdr *)
+			((struct sk_buff *)(lbf->bf_mpdu))->data;
+		hdr->frame_control |= cpu_to_le16(IEEE80211_FCTL_MOREDATA);
+	}
+
+	/*
+	 * Now, concat the frame onto the queue
+	 */
+	list_splice_tail_init(head, &txq->axq_q);
+	txq->axq_depth++;
+	txq->axq_totalqueued++;
+	txq->axq_linkbuf = list_entry(txq->axq_q.prev, struct ath_buf, list);
+
+	DPRINTF(sc, ATH_DBG_QUEUE,
+		"%s: txq depth = %d\n", __func__, txq->axq_depth);
+	if (txq->axq_link != NULL) {
+		*txq->axq_link = bf->bf_daddr;
+		DPRINTF(sc, ATH_DBG_XMIT,
+			"%s: link[%u](%p)=%llx (%p)\n",
+			__func__,
+			txq->axq_qnum, txq->axq_link,
+			ito64(bf->bf_daddr), bf->bf_desc);
+	}
+	txq->axq_link = &(bf->bf_lastbf->bf_desc->ds_link);
+	ath9k_hw_set_interrupts(ah, sc->sc_imask);
+}
+
+/*
+ * Insert a chain of ath_buf (descriptors) on a txq and
+ * assume the descriptors are already chained together by caller.
+ * NB: must be called with txq lock held
+ */
+
+static void ath_tx_txqaddbuf(struct ath_softc *sc,
+		struct ath_txq *txq, struct list_head *head)
+{
+	struct ath_hal *ah = sc->sc_ah;
+	struct ath_buf *bf;
+	/*
+	 * Insert the frame on the outbound list and
+	 * pass it on to the hardware.
+	 */
+
+	if (list_empty(head))
+		return;
+
+	bf = list_first_entry(head, struct ath_buf, list);
+
+	list_splice_tail_init(head, &txq->axq_q);
+	txq->axq_depth++;
+	txq->axq_totalqueued++;
+	txq->axq_linkbuf = list_entry(txq->axq_q.prev, struct ath_buf, list);
+
+	DPRINTF(sc, ATH_DBG_QUEUE,
+		"%s: txq depth = %d\n", __func__, txq->axq_depth);
+
+	if (txq->axq_link == NULL) {
+		ath9k_hw_puttxbuf(ah, txq->axq_qnum, bf->bf_daddr);
+		DPRINTF(sc, ATH_DBG_XMIT,
+			"%s: TXDP[%u] = %llx (%p)\n",
+			__func__, txq->axq_qnum,
+			ito64(bf->bf_daddr), bf->bf_desc);
+	} else {
+		*txq->axq_link = bf->bf_daddr;
+		DPRINTF(sc, ATH_DBG_XMIT, "%s: link[%u] (%p)=%llx (%p)\n",
+			__func__,
+			txq->axq_qnum, txq->axq_link,
+			ito64(bf->bf_daddr), bf->bf_desc);
+	}
+	txq->axq_link = &(bf->bf_lastbf->bf_desc->ds_link);
+	ath9k_hw_txstart(ah, txq->axq_qnum);
+}
+
+/* Get transmit rate index using rate in Kbps */
+
+static int ath_tx_findindex(const struct ath9k_rate_table *rt, int rate)
+{
+	int i;
+	int ndx = 0;
+
+	for (i = 0; i < rt->rateCount; i++) {
+		if (rt->info[i].rateKbps == rate) {
+			ndx = i;
+			break;
+		}
+	}
+
+	return ndx;
+}
+
+/* Check if it's okay to send out aggregates */
+
+static int ath_aggr_query(struct ath_softc *sc,
+	struct ath_node *an, u8 tidno)
+{
+	struct ath_atx_tid *tid;
+	tid = ATH_AN_2_TID(an, tidno);
+
+	if (tid->addba_exchangecomplete || tid->addba_exchangeinprogress)
+		return 1;
+	else
+		return 0;
+}
+
+static enum ath9k_pkt_type get_hal_packet_type(struct ieee80211_hdr *hdr)
+{
+	enum ath9k_pkt_type htype;
+	__le16 fc;
+
+	fc = hdr->frame_control;
+
+	/* Calculate Atheros packet type from IEEE80211 packet header */
+
+	if (ieee80211_is_beacon(fc))
+		htype = ATH9K_PKT_TYPE_BEACON;
+	else if (ieee80211_is_probe_resp(fc))
+		htype = ATH9K_PKT_TYPE_PROBE_RESP;
+	else if (ieee80211_is_atim(fc))
+		htype = ATH9K_PKT_TYPE_ATIM;
+	else if (ieee80211_is_pspoll(fc))
+		htype = ATH9K_PKT_TYPE_PSPOLL;
+	else
+		htype = ATH9K_PKT_TYPE_NORMAL;
+
+	return htype;
+}
+
+static void fill_min_rates(struct sk_buff *skb, struct ath_tx_control *txctl)
+{
+	struct ieee80211_hdr *hdr;
+	struct ieee80211_tx_info *tx_info = IEEE80211_SKB_CB(skb);
+	struct ath_tx_info_priv *tx_info_priv;
+	__le16 fc;
+
+	hdr = (struct ieee80211_hdr *)skb->data;
+	fc = hdr->frame_control;
+	tx_info_priv = (struct ath_tx_info_priv *)tx_info->driver_data[0];
+
+	if (ieee80211_is_mgmt(fc) || ieee80211_is_ctl(fc)) {
+		txctl->use_minrate = 1;
+		txctl->min_rate = tx_info_priv->min_rate;
+	} else if (ieee80211_is_data(fc)) {
+		if (ieee80211_is_nullfunc(fc) ||
+			/* Port Access Entity (IEEE 802.1X) */
+			(skb->protocol == cpu_to_be16(0x888E))) {
+			txctl->use_minrate = 1;
+			txctl->min_rate = tx_info_priv->min_rate;
+		}
+		if (is_multicast_ether_addr(hdr->addr1))
+			txctl->mcast_rate = tx_info_priv->min_rate;
+	}
+
+}
+
+/* This function will setup additional txctl information, mostly rate stuff */
+/* FIXME: seqno, ps */
+static int ath_tx_prepare(struct ath_softc *sc,
+			  struct sk_buff *skb,
+			  struct ath_tx_control *txctl)
+{
+	struct ieee80211_hw *hw = sc->hw;
+	struct ieee80211_hdr *hdr;
+	struct ath_rc_series *rcs;
+	struct ath_txq *txq = NULL;
+	const struct ath9k_rate_table *rt;
+	struct ieee80211_tx_info *tx_info = IEEE80211_SKB_CB(skb);
+	struct ath_tx_info_priv *tx_info_priv;
+	int hdrlen;
+	u8 rix, antenna;
+	__le16 fc;
+	u8 *qc;
+
+	memset(txctl, 0, sizeof(struct ath_tx_control));
+
+	txctl->dev = sc;
+	hdr = (struct ieee80211_hdr *)skb->data;
+	hdrlen = ieee80211_get_hdrlen_from_skb(skb);
+	fc = hdr->frame_control;
+
+	rt = sc->sc_currates;
+	BUG_ON(!rt);
+
+	/* Fill misc fields */
+
+	spin_lock_bh(&sc->node_lock);
+	txctl->an = ath_node_get(sc, hdr->addr1);
+	/* create a temp node, if the node is not there already */
+	if (!txctl->an)
+		txctl->an = ath_node_attach(sc, hdr->addr1, 0);
+	spin_unlock_bh(&sc->node_lock);
+
+	if (ieee80211_is_data_qos(fc)) {
+		qc = ieee80211_get_qos_ctl(hdr);
+		txctl->tidno = qc[0] & 0xf;
+	}
+
+	txctl->if_id = 0;
+	txctl->nextfraglen = 0;
+	txctl->frmlen = skb->len + FCS_LEN - (hdrlen & 3);
+	txctl->txpower = MAX_RATE_POWER; /* FIXME */
+
+	/* Fill Key related fields */
+
+	txctl->keytype = ATH9K_KEY_TYPE_CLEAR;
+	txctl->keyix = ATH9K_TXKEYIX_INVALID;
+
+	if (tx_info->control.hw_key) {
+		txctl->keyix = tx_info->control.hw_key->hw_key_idx;
+		txctl->frmlen += tx_info->control.icv_len;
+
+		if (sc->sc_keytype == ATH9K_CIPHER_WEP)
+			txctl->keytype = ATH9K_KEY_TYPE_WEP;
+		else if (sc->sc_keytype == ATH9K_CIPHER_TKIP)
+			txctl->keytype = ATH9K_KEY_TYPE_TKIP;
+		else if (sc->sc_keytype == ATH9K_CIPHER_AES_CCM)
+			txctl->keytype = ATH9K_KEY_TYPE_AES;
+	}
+
+	/* Fill packet type */
+
+	txctl->atype = get_hal_packet_type(hdr);
+
+	/* Fill qnum */
+
+	txctl->qnum = ath_get_hal_qnum(skb_get_queue_mapping(skb), sc);
+	txq = &sc->sc_txq[txctl->qnum];
+	spin_lock_bh(&txq->axq_lock);
+
+	/* Try to avoid running out of descriptors */
+	if (txq->axq_depth >= (ATH_TXBUF - 20)) {
+		DPRINTF(sc, ATH_DBG_FATAL,
+			"%s: TX queue: %d is full, depth: %d\n",
+			__func__,
+			txctl->qnum,
+			txq->axq_depth);
+		ieee80211_stop_queue(hw, skb_get_queue_mapping(skb));
+		txq->stopped = 1;
+		spin_unlock_bh(&txq->axq_lock);
+		return -1;
+	}
+
+	spin_unlock_bh(&txq->axq_lock);
+
+	/* Fill rate */
+
+	fill_min_rates(skb, txctl);
+
+	/* Fill flags */
+
+	txctl->flags = ATH9K_TXDESC_CLRDMASK;    /* needed for crypto errors */
+
+	if (tx_info->flags & IEEE80211_TX_CTL_NO_ACK)
+		txctl->flags |= ATH9K_TXDESC_NOACK;
+	if (tx_info->flags & IEEE80211_TX_CTL_USE_RTS_CTS)
+		txctl->flags |= ATH9K_TXDESC_RTSENA;
+
+	/*
+	 * Setup for rate calculations.
+	 */
+	tx_info_priv = (struct ath_tx_info_priv *)tx_info->driver_data[0];
+	rcs = tx_info_priv->rcs;
+
+	if (ieee80211_is_data(fc) && !txctl->use_minrate) {
+
+		/* Enable HT only for DATA frames and not for EAPOL */
+		txctl->ht = (hw->conf.ht_conf.ht_supported &&
+			    (tx_info->flags & IEEE80211_TX_CTL_AMPDU));
+
+		if (is_multicast_ether_addr(hdr->addr1)) {
+			rcs[0].rix = (u8)
+				ath_tx_findindex(rt, txctl->mcast_rate);
+
+			/*
+			 * mcast packets are not re-tried.
+			 */
+			rcs[0].tries = 1;
+		}
+		/* For HT capable stations, we save tidno for later use.
+		 * We also override seqno set by upper layer with the one
+		 * in tx aggregation state.
+		 *
+		 * First, the fragmentation stat is determined.
+		 * If fragmentation is on, the sequence number is
+		 * not overridden, since it has been
+		 * incremented by the fragmentation routine.
+		 */
+		if (likely(!(txctl->flags & ATH9K_TXDESC_FRAG_IS_ON)) &&
+			txctl->ht && sc->sc_txaggr) {
+			struct ath_atx_tid *tid;
+
+			tid = ATH_AN_2_TID(txctl->an, txctl->tidno);
+
+			hdr->seq_ctrl = cpu_to_le16(tid->seq_next <<
+				IEEE80211_SEQ_SEQ_SHIFT);
+			txctl->seqno = tid->seq_next;
+			INCR(tid->seq_next, IEEE80211_SEQ_MAX);
+		}
+	} else {
+		/* for management and control frames,
+		 * or for NULL and EAPOL frames */
+		if (txctl->min_rate)
+			rcs[0].rix = ath_rate_findrateix(sc, txctl->min_rate);
+		else
+			rcs[0].rix = 0;
+		rcs[0].tries = ATH_MGT_TXMAXTRY;
+	}
+	rix = rcs[0].rix;
+
+	/*
+	 * Calculate duration.  This logically belongs in the 802.11
+	 * layer but it lacks sufficient information to calculate it.
+	 */
+	if ((txctl->flags & ATH9K_TXDESC_NOACK) == 0 && !ieee80211_is_ctl(fc)) {
+		u16 dur;
+		/*
+		 * XXX not right with fragmentation.
+		 */
+		if (sc->sc_flags & ATH_PREAMBLE_SHORT)
+			dur = rt->info[rix].spAckDuration;
+		else
+			dur = rt->info[rix].lpAckDuration;
+
+		if (le16_to_cpu(hdr->frame_control) &
+				IEEE80211_FCTL_MOREFRAGS) {
+			dur += dur;  /* Add additional 'SIFS + ACK' */
+
+			/*
+			** Compute size of next fragment in order to compute
+			** durations needed to update NAV.
+			** The last fragment uses the ACK duration only.
+			** Add time for next fragment.
+			*/
+			dur += ath9k_hw_computetxtime(sc->sc_ah, rt,
+					txctl->nextfraglen,
+					rix, sc->sc_flags & ATH_PREAMBLE_SHORT);
+		}
+
+		if (ieee80211_has_morefrags(fc) ||
+		     (le16_to_cpu(hdr->seq_ctrl) & IEEE80211_SCTL_FRAG)) {
+			/*
+			**  Force hardware to use computed duration for next
+			**  fragment by disabling multi-rate retry, which
+			**  updates duration based on the multi-rate
+			**  duration table.
+			*/
+			rcs[1].tries = rcs[2].tries = rcs[3].tries = 0;
+			rcs[1].rix = rcs[2].rix = rcs[3].rix = 0;
+			/* reset tries but keep rate index */
+			rcs[0].tries = ATH_TXMAXTRY;
+		}
+
+		hdr->duration_id = cpu_to_le16(dur);
+	}
+
+	/*
+	 * Determine if a tx interrupt should be generated for
+	 * this descriptor.  We take a tx interrupt to reap
+	 * descriptors when the h/w hits an EOL condition or
+	 * when the descriptor is specifically marked to generate
+	 * an interrupt.  We periodically mark descriptors in this
+	 * way to insure timely replenishing of the supply needed
+	 * for sending frames.  Defering interrupts reduces system
+	 * load and potentially allows more concurrent work to be
+	 * done but if done to aggressively can cause senders to
+	 * backup.
+	 *
+	 * NB: use >= to deal with sc_txintrperiod changing
+	 *     dynamically through sysctl.
+	 */
+	spin_lock_bh(&txq->axq_lock);
+	if ((++txq->axq_intrcnt >= sc->sc_txintrperiod)) {
+		txctl->flags |= ATH9K_TXDESC_INTREQ;
+		txq->axq_intrcnt = 0;
+	}
+	spin_unlock_bh(&txq->axq_lock);
+
+	if (is_multicast_ether_addr(hdr->addr1)) {
+		antenna = sc->sc_mcastantenna + 1;
+		sc->sc_mcastantenna = (sc->sc_mcastantenna + 1) & 0x1;
+	} else
+		antenna = sc->sc_txantenna;
+
+#ifdef USE_LEGACY_HAL
+	txctl->antenna = antenna;
+#endif
+	return 0;
+}
+
+/* To complete a chain of buffers associated a frame */
+
+static void ath_tx_complete_buf(struct ath_softc *sc,
+				struct ath_buf *bf,
+				struct list_head *bf_q,
+				int txok, int sendbar)
+{
+	struct sk_buff *skb = bf->bf_mpdu;
+	struct ath_xmit_status tx_status;
+	dma_addr_t *pa;
+
+	/*
+	 * Set retry information.
+	 * NB: Don't use the information in the descriptor, because the frame
+	 * could be software retried.
+	 */
+	tx_status.retries = bf->bf_retries;
+	tx_status.flags = 0;
+
+	if (sendbar)
+		tx_status.flags = ATH_TX_BAR;
+
+	if (!txok) {
+		tx_status.flags |= ATH_TX_ERROR;
+
+		if (bf->bf_isxretried)
+			tx_status.flags |= ATH_TX_XRETRY;
+	}
+	/* Unmap this frame */
+	pa = get_dma_mem_context(bf, bf_dmacontext);
+	pci_unmap_single(sc->pdev,
+			 *pa,
+			 skb->len,
+			 PCI_DMA_TODEVICE);
+	/* complete this frame */
+	ath_tx_complete(sc, skb, &tx_status, bf->bf_node);
+
+	/*
+	 * Return the list of ath_buf of this mpdu to free queue
+	 */
+	spin_lock_bh(&sc->sc_txbuflock);
+	list_splice_tail_init(bf_q, &sc->sc_txbuf);
+	spin_unlock_bh(&sc->sc_txbuflock);
+}
+
+/*
+ * queue up a dest/ac pair for tx scheduling
+ * NB: must be called with txq lock held
+ */
+
+static void ath_tx_queue_tid(struct ath_txq *txq, struct ath_atx_tid *tid)
+{
+	struct ath_atx_ac *ac = tid->ac;
+
+	/*
+	 * if tid is paused, hold off
+	 */
+	if (tid->paused)
+		return;
+
+	/*
+	 * add tid to ac atmost once
+	 */
+	if (tid->sched)
+		return;
+
+	tid->sched = true;
+	list_add_tail(&tid->list, &ac->tid_q);
+
+	/*
+	 * add node ac to txq atmost once
+	 */
+	if (ac->sched)
+		return;
+
+	ac->sched = true;
+	list_add_tail(&ac->list, &txq->axq_acq);
+}
+
+/* pause a tid */
+
+static void ath_tx_pause_tid(struct ath_softc *sc, struct ath_atx_tid *tid)
+{
+	struct ath_txq *txq = &sc->sc_txq[tid->ac->qnum];
+
+	spin_lock_bh(&txq->axq_lock);
+
+	tid->paused++;
+
+	spin_unlock_bh(&txq->axq_lock);
+}
+
+/* resume a tid and schedule aggregate */
+
+void ath_tx_resume_tid(struct ath_softc *sc, struct ath_atx_tid *tid)
+{
+	struct ath_txq *txq = &sc->sc_txq[tid->ac->qnum];
+
+	ASSERT(tid->paused > 0);
+	spin_lock_bh(&txq->axq_lock);
+
+	tid->paused--;
+
+	if (tid->paused > 0)
+		goto unlock;
+
+	if (list_empty(&tid->buf_q))
+		goto unlock;
+
+	/*
+	 * Add this TID to scheduler and try to send out aggregates
+	 */
+	ath_tx_queue_tid(txq, tid);
+	ath_txq_schedule(sc, txq);
+unlock:
+	spin_unlock_bh(&txq->axq_lock);
+}
+
+/* Compute the number of bad frames */
+
+static int ath_tx_num_badfrms(struct ath_softc *sc,
+	struct ath_buf *bf, int txok)
+{
+	struct ath_node *an = bf->bf_node;
+	int isnodegone = (an->an_flags & ATH_NODE_CLEAN);
+	struct ath_buf *bf_last = bf->bf_lastbf;
+	struct ath_desc *ds = bf_last->bf_desc;
+	u16 seq_st = 0;
+	u32 ba[WME_BA_BMP_SIZE >> 5];
+	int ba_index;
+	int nbad = 0;
+	int isaggr = 0;
+
+	if (isnodegone || ds->ds_txstat.ts_flags == ATH9K_TX_SW_ABORTED)
+		return 0;
+
+	isaggr = bf->bf_isaggr;
+	if (isaggr) {
+		seq_st = ATH_DS_BA_SEQ(ds);
+		memcpy(ba, ATH_DS_BA_BITMAP(ds), WME_BA_BMP_SIZE >> 3);
+	}
+
+	while (bf) {
+		ba_index = ATH_BA_INDEX(seq_st, bf->bf_seqno);
+		if (!txok || (isaggr && !ATH_BA_ISSET(ba, ba_index)))
+			nbad++;
+
+		bf = bf->bf_next;
+	}
+
+	return nbad;
+}
+
+static void ath_tx_set_retry(struct ath_softc *sc, struct ath_buf *bf)
+{
+	struct sk_buff *skb;
+	struct ieee80211_hdr *hdr;
+
+	bf->bf_isretried = 1;
+	bf->bf_retries++;
+
+	skb = bf->bf_mpdu;
+	hdr = (struct ieee80211_hdr *)skb->data;
+	hdr->frame_control |= cpu_to_le16(IEEE80211_FCTL_RETRY);
+}
+
+/* Update block ack window */
+
+static void ath_tx_update_baw(struct ath_softc *sc,
+	struct ath_atx_tid *tid, int seqno)
+{
+	int index, cindex;
+
+	index  = ATH_BA_INDEX(tid->seq_start, seqno);
+	cindex = (tid->baw_head + index) & (ATH_TID_MAX_BUFS - 1);
+
+	tid->tx_buf[cindex] = NULL;
+
+	while (tid->baw_head != tid->baw_tail && !tid->tx_buf[tid->baw_head]) {
+		INCR(tid->seq_start, IEEE80211_SEQ_MAX);
+		INCR(tid->baw_head, ATH_TID_MAX_BUFS);
+	}
+}
+
+/*
+ * ath_pkt_dur - compute packet duration (NB: not NAV)
+ *
+ * rix - rate index
+ * pktlen - total bytes (delims + data + fcs + pads + pad delims)
+ * width  - 0 for 20 MHz, 1 for 40 MHz
+ * half_gi - to use 4us v/s 3.6 us for symbol time
+ */
+
+static u32 ath_pkt_duration(struct ath_softc *sc,
+				  u8 rix,
+				  struct ath_buf *bf,
+				  int width,
+				  int half_gi,
+				  bool shortPreamble)
+{
+	const struct ath9k_rate_table *rt = sc->sc_currates;
+	u32 nbits, nsymbits, duration, nsymbols;
+	u8 rc;
+	int streams, pktlen;
+
+	pktlen = bf->bf_isaggr ? bf->bf_al : bf->bf_frmlen;
+	rc = rt->info[rix].rateCode;
+
+	/*
+	 * for legacy rates, use old function to compute packet duration
+	 */
+	if (!IS_HT_RATE(rc))
+		return ath9k_hw_computetxtime(sc->sc_ah,
+					     rt,
+					     pktlen,
+					     rix,
+					     shortPreamble);
+	/*
+	 * find number of symbols: PLCP + data
+	 */
+	nbits = (pktlen << 3) + OFDM_PLCP_BITS;
+	nsymbits = bits_per_symbol[HT_RC_2_MCS(rc)][width];
+	nsymbols = (nbits + nsymbits - 1) / nsymbits;
+
+	if (!half_gi)
+		duration = SYMBOL_TIME(nsymbols);
+	else
+		duration = SYMBOL_TIME_HALFGI(nsymbols);
+
+	/*
+	 * addup duration for legacy/ht training and signal fields
+	 */
+	streams = HT_RC_2_STREAMS(rc);
+	duration += L_STF + L_LTF + L_SIG + HT_SIG + HT_STF + HT_LTF(streams);
+	return duration;
+}
+
+/* Rate module function to set rate related fields in tx descriptor */
+
+static void ath_buf_set_rate(struct ath_softc *sc, struct ath_buf *bf)
+{
+	struct ath_hal *ah = sc->sc_ah;
+	const struct ath9k_rate_table *rt;
+	struct ath_desc *ds = bf->bf_desc;
+	struct ath_desc *lastds = bf->bf_lastbf->bf_desc;
+	struct ath9k_11n_rate_series series[4];
+	int i, flags, rtsctsena = 0, dynamic_mimops = 0;
+	u32 ctsduration = 0;
+	u8 rix = 0, cix, ctsrate = 0;
+	u32 aggr_limit_with_rts = sc->sc_rtsaggrlimit;
+	struct ath_node *an = (struct ath_node *) bf->bf_node;
+
+	/*
+	 * get the cix for the lowest valid rix.
+	 */
+	rt = sc->sc_currates;
+	for (i = 4; i--;) {
+		if (bf->bf_rcs[i].tries) {
+			rix = bf->bf_rcs[i].rix;
+			break;
+		}
+	}
+	flags = (bf->bf_flags & (ATH9K_TXDESC_RTSENA | ATH9K_TXDESC_CTSENA));
+	cix = rt->info[rix].controlRate;
+
+	/*
+	 * If 802.11g protection is enabled, determine whether
+	 * to use RTS/CTS or just CTS.  Note that this is only
+	 * done for OFDM/HT unicast frames.
+	 */
+	if (sc->sc_protmode != PROT_M_NONE &&
+	    (rt->info[rix].phy == PHY_OFDM ||
+	     rt->info[rix].phy == PHY_HT) &&
+	    (bf->bf_flags & ATH9K_TXDESC_NOACK) == 0) {
+		if (sc->sc_protmode == PROT_M_RTSCTS)
+			flags = ATH9K_TXDESC_RTSENA;
+		else if (sc->sc_protmode == PROT_M_CTSONLY)
+			flags = ATH9K_TXDESC_CTSENA;
+
+		cix = rt->info[sc->sc_protrix].controlRate;
+		rtsctsena = 1;
+	}
+
+	/* For 11n, the default behavior is to enable RTS for
+	 * hw retried frames. We enable the global flag here and
+	 * let rate series flags determine which rates will actually
+	 * use RTS.
+	 */
+	if ((ah->ah_caps.hw_caps & ATH9K_HW_CAP_HT) && bf->bf_isdata) {
+		BUG_ON(!an);
+		/*
+		 * 802.11g protection not needed, use our default behavior
+		 */
+		if (!rtsctsena)
+			flags = ATH9K_TXDESC_RTSENA;
+		/*
+		 * For dynamic MIMO PS, RTS needs to precede the first aggregate
+		 * and the second aggregate should have any protection at all.
+		 */
+		if (an->an_smmode == ATH_SM_PWRSAV_DYNAMIC) {
+			if (!bf->bf_aggrburst) {
+				flags = ATH9K_TXDESC_RTSENA;
+				dynamic_mimops = 1;
+			} else {
+				flags = 0;
+			}
+		}
+	}
+
+	/*
+	 * Set protection if aggregate protection on
+	 */
+	if (sc->sc_config.ath_aggr_prot &&
+	    (!bf->bf_isaggr || (bf->bf_isaggr && bf->bf_al < 8192))) {
+		flags = ATH9K_TXDESC_RTSENA;
+		cix = rt->info[sc->sc_protrix].controlRate;
+		rtsctsena = 1;
+	}
+
+	/*
+	 *  For AR5416 - RTS cannot be followed by a frame larger than 8K.
+	 */
+	if (bf->bf_isaggr && (bf->bf_al > aggr_limit_with_rts)) {
+		/*
+		 * Ensure that in the case of SM Dynamic power save
+		 * while we are bursting the second aggregate the
+		 * RTS is cleared.
+		 */
+		flags &= ~(ATH9K_TXDESC_RTSENA);
+	}
+
+	/*
+	 * CTS transmit rate is derived from the transmit rate
+	 * by looking in the h/w rate table.  We must also factor
+	 * in whether or not a short preamble is to be used.
+	 */
+	/* NB: cix is set above where RTS/CTS is enabled */
+	BUG_ON(cix == 0xff);
+	ctsrate = rt->info[cix].rateCode |
+		(bf->bf_shpreamble ? rt->info[cix].shortPreamble : 0);
+
+	/*
+	 * Setup HAL rate series
+	 */
+	memzero(series, sizeof(struct ath9k_11n_rate_series) * 4);
+
+	for (i = 0; i < 4; i++) {
+		if (!bf->bf_rcs[i].tries)
+			continue;
+
+		rix = bf->bf_rcs[i].rix;
+
+		series[i].Rate = rt->info[rix].rateCode |
+			(bf->bf_shpreamble ? rt->info[rix].shortPreamble : 0);
+
+		series[i].Tries = bf->bf_rcs[i].tries;
+
+		series[i].RateFlags = (
+			(bf->bf_rcs[i].flags & ATH_RC_RTSCTS_FLAG) ?
+				ATH9K_RATESERIES_RTS_CTS : 0) |
+			((bf->bf_rcs[i].flags & ATH_RC_CW40_FLAG) ?
+				ATH9K_RATESERIES_2040 : 0) |
+			((bf->bf_rcs[i].flags & ATH_RC_SGI_FLAG) ?
+				ATH9K_RATESERIES_HALFGI : 0);
+
+		series[i].PktDuration = ath_pkt_duration(
+			sc, rix, bf,
+			(bf->bf_rcs[i].flags & ATH_RC_CW40_FLAG) != 0,
+			(bf->bf_rcs[i].flags & ATH_RC_SGI_FLAG),
+			bf->bf_shpreamble);
+
+		if ((an->an_smmode == ATH_SM_PWRSAV_STATIC) &&
+		    (bf->bf_rcs[i].flags & ATH_RC_DS_FLAG) == 0) {
+			/*
+			 * When sending to an HT node that has enabled static
+			 * SM/MIMO power save, send at single stream rates but
+			 * use maximum allowed transmit chains per user,
+			 * hardware, regulatory, or country limits for
+			 * better range.
+			 */
+			series[i].ChSel = sc->sc_tx_chainmask;
+		} else {
+			if (bf->bf_ht)
+				series[i].ChSel =
+					ath_chainmask_sel_logic(sc, an);
+			else
+				series[i].ChSel = sc->sc_tx_chainmask;
+		}
+
+		if (rtsctsena)
+			series[i].RateFlags |= ATH9K_RATESERIES_RTS_CTS;
+
+		/*
+		 * Set RTS for all rates if node is in dynamic powersave
+		 * mode and we are using dual stream rates.
+		 */
+		if (dynamic_mimops && (bf->bf_rcs[i].flags & ATH_RC_DS_FLAG))
+			series[i].RateFlags |= ATH9K_RATESERIES_RTS_CTS;
+	}
+
+	/*
+	 * For non-HT devices, calculate RTS/CTS duration in software
+	 * and disable multi-rate retry.
+	 */
+	if (flags && !(ah->ah_caps.hw_caps & ATH9K_HW_CAP_HT)) {
+		/*
+		 * Compute the transmit duration based on the frame
+		 * size and the size of an ACK frame.  We call into the
+		 * HAL to do the computation since it depends on the
+		 * characteristics of the actual PHY being used.
+		 *
+		 * NB: CTS is assumed the same size as an ACK so we can
+		 *     use the precalculated ACK durations.
+		 */
+		if (flags & ATH9K_TXDESC_RTSENA) {    /* SIFS + CTS */
+			ctsduration += bf->bf_shpreamble ?
+				rt->info[cix].spAckDuration :
+				rt->info[cix].lpAckDuration;
+		}
+
+		ctsduration += series[0].PktDuration;
+
+		if ((bf->bf_flags & ATH9K_TXDESC_NOACK) == 0) { /* SIFS + ACK */
+			ctsduration += bf->bf_shpreamble ?
+				rt->info[rix].spAckDuration :
+				rt->info[rix].lpAckDuration;
+		}
+
+		/*
+		 * Disable multi-rate retry when using RTS/CTS by clearing
+		 * series 1, 2 and 3.
+		 */
+		memzero(&series[1], sizeof(struct ath9k_11n_rate_series) * 3);
+	}
+
+	/*
+	 * set dur_update_en for l-sig computation except for PS-Poll frames
+	 */
+	ath9k_hw_set11n_ratescenario(ah, ds, lastds,
+				    !bf->bf_ispspoll,
+				    ctsrate,
+				    ctsduration,
+				    series, 4, flags);
+	if (sc->sc_config.ath_aggr_prot && flags)
+		ath9k_hw_set11n_burstduration(ah, ds, 8192);
+}
+
+/*
+ * Function to send a normal HT (non-AMPDU) frame
+ * NB: must be called with txq lock held
+ */
+
+static int ath_tx_send_normal(struct ath_softc *sc,
+			      struct ath_txq *txq,
+			      struct ath_atx_tid *tid,
+			      struct list_head *bf_head)
+{
+	struct ath_buf *bf;
+	struct sk_buff *skb;
+	struct ieee80211_tx_info *tx_info;
+	struct ath_tx_info_priv *tx_info_priv;
+
+	BUG_ON(list_empty(bf_head));
+
+	bf = list_first_entry(bf_head, struct ath_buf, list);
+	bf->bf_isampdu = 0; /* regular HT frame */
+
+	skb = (struct sk_buff *)bf->bf_mpdu;
+	tx_info = IEEE80211_SKB_CB(skb);
+	tx_info_priv = (struct ath_tx_info_priv *)tx_info->driver_data[0];
+	memcpy(bf->bf_rcs, tx_info_priv->rcs, 4 * sizeof(tx_info_priv->rcs[0]));
+
+	/* update starting sequence number for subsequent ADDBA request */
+	INCR(tid->seq_start, IEEE80211_SEQ_MAX);
+
+	/* Queue to h/w without aggregation */
+	bf->bf_nframes = 1;
+	bf->bf_lastbf = bf->bf_lastfrm; /* one single frame */
+	ath_buf_set_rate(sc, bf);
+	ath_tx_txqaddbuf(sc, txq, bf_head);
+
+	return 0;
+}
+
+/* flush tid's software queue and send frames as non-ampdu's */
+
+static void ath_tx_flush_tid(struct ath_softc *sc, struct ath_atx_tid *tid)
+{
+	struct ath_txq *txq = &sc->sc_txq[tid->ac->qnum];
+	struct ath_buf *bf;
+	struct list_head bf_head;
+	INIT_LIST_HEAD(&bf_head);
+
+	ASSERT(tid->paused > 0);
+	spin_lock_bh(&txq->axq_lock);
+
+	tid->paused--;
+
+	if (tid->paused > 0) {
+		spin_unlock_bh(&txq->axq_lock);
+		return;
+	}
+
+	while (!list_empty(&tid->buf_q)) {
+		bf = list_first_entry(&tid->buf_q, struct ath_buf, list);
+		ASSERT(!bf->bf_isretried);
+		list_cut_position(&bf_head, &tid->buf_q, &bf->bf_lastfrm->list);
+		ath_tx_send_normal(sc, txq, tid, &bf_head);
+	}
+
+	spin_unlock_bh(&txq->axq_lock);
+}
+
+/* Completion routine of an aggregate */
+
+static void ath_tx_complete_aggr_rifs(struct ath_softc *sc,
+				      struct ath_txq *txq,
+				      struct ath_buf *bf,
+				      struct list_head *bf_q,
+				      int txok)
+{
+	struct ath_node *an = bf->bf_node;
+	struct ath_atx_tid *tid = ATH_AN_2_TID(an, bf->bf_tidno);
+	struct ath_buf *bf_last = bf->bf_lastbf;
+	struct ath_desc *ds = bf_last->bf_desc;
+	struct ath_buf *bf_next, *bf_lastq = NULL;
+	struct list_head bf_head, bf_pending;
+	u16 seq_st = 0;
+	u32 ba[WME_BA_BMP_SIZE >> 5];
+	int isaggr, txfail, txpending, sendbar = 0, needreset = 0;
+	int isnodegone = (an->an_flags & ATH_NODE_CLEAN);
+
+	isaggr = bf->bf_isaggr;
+	if (isaggr) {
+		if (txok) {
+			if (ATH_DS_TX_BA(ds)) {
+				/*
+				 * extract starting sequence and
+				 * block-ack bitmap
+				 */
+				seq_st = ATH_DS_BA_SEQ(ds);
+				memcpy(ba,
+					ATH_DS_BA_BITMAP(ds),
+					WME_BA_BMP_SIZE >> 3);
+			} else {
+				memzero(ba, WME_BA_BMP_SIZE >> 3);
+
+				/*
+				 * AR5416 can become deaf/mute when BA
+				 * issue happens. Chip needs to be reset.
+				 * But AP code may have sychronization issues
+				 * when perform internal reset in this routine.
+				 * Only enable reset in STA mode for now.
+				 */
+				if (sc->sc_opmode == ATH9K_M_STA)
+					needreset = 1;
+			}
+		} else {
+			memzero(ba, WME_BA_BMP_SIZE >> 3);
+		}
+	}
+
+	INIT_LIST_HEAD(&bf_pending);
+	INIT_LIST_HEAD(&bf_head);
+
+	while (bf) {
+		txfail = txpending = 0;
+		bf_next = bf->bf_next;
+
+		if (ATH_BA_ISSET(ba, ATH_BA_INDEX(seq_st, bf->bf_seqno))) {
+			/* transmit completion, subframe is
+			 * acked by block ack */
+		} else if (!isaggr && txok) {
+			/* transmit completion */
+		} else {
+
+			if (!tid->cleanup_inprogress && !isnodegone &&
+			    ds->ds_txstat.ts_flags != ATH9K_TX_SW_ABORTED) {
+				if (bf->bf_retries < ATH_MAX_SW_RETRIES) {
+					ath_tx_set_retry(sc, bf);
+					txpending = 1;
+				} else {
+					bf->bf_isxretried = 1;
+					txfail = 1;
+					sendbar = 1;
+				}
+			} else {
+				/*
+				 * cleanup in progress, just fail
+				 * the un-acked sub-frames
+				 */
+				txfail = 1;
+			}
+		}
+		/*
+		 * Remove ath_buf's of this sub-frame from aggregate queue.
+		 */
+		if (bf_next == NULL) {  /* last subframe in the aggregate */
+			ASSERT(bf->bf_lastfrm == bf_last);
+
+			/*
+			 * The last descriptor of the last sub frame could be
+			 * a holding descriptor for h/w. If that's the case,
+			 * bf->bf_lastfrm won't be in the bf_q.
+			 * Make sure we handle bf_q properly here.
+			 */
+
+			if (!list_empty(bf_q)) {
+				bf_lastq = list_entry(bf_q->prev,
+					struct ath_buf, list);
+				list_cut_position(&bf_head,
+					bf_q, &bf_lastq->list);
+			} else {
+				/*
+				 * XXX: if the last subframe only has one
+				 * descriptor which is also being used as
+				 * a holding descriptor. Then the ath_buf
+				 * is not in the bf_q at all.
+				 */
+				INIT_LIST_HEAD(&bf_head);
+			}
+		} else {
+			ASSERT(!list_empty(bf_q));
+			list_cut_position(&bf_head,
+				bf_q, &bf->bf_lastfrm->list);
+		}
+
+		if (!txpending) {
+			/*
+			 * complete the acked-ones/xretried ones; update
+			 * block-ack window
+			 */
+			spin_lock_bh(&txq->axq_lock);
+			ath_tx_update_baw(sc, tid, bf->bf_seqno);
+			spin_unlock_bh(&txq->axq_lock);
+
+			/* complete this sub-frame */
+			ath_tx_complete_buf(sc, bf, &bf_head, !txfail, sendbar);
+		} else {
+			/*
+			 * retry the un-acked ones
+			 */
+			/*
+			 * XXX: if the last descriptor is holding descriptor,
+			 * in order to requeue the frame to software queue, we
+			 * need to allocate a new descriptor and
+			 * copy the content of holding descriptor to it.
+			 */
+			if (bf->bf_next == NULL &&
+			    bf_last->bf_status & ATH_BUFSTATUS_STALE) {
+				struct ath_buf *tbf;
+
+				/* allocate new descriptor */
+				spin_lock_bh(&sc->sc_txbuflock);
+				ASSERT(!list_empty((&sc->sc_txbuf)));
+				tbf = list_first_entry(&sc->sc_txbuf,
+						struct ath_buf, list);
+				list_del(&tbf->list);
+				spin_unlock_bh(&sc->sc_txbuflock);
+
+				ATH_TXBUF_RESET(tbf);
+
+				/* copy descriptor content */
+				tbf->bf_mpdu = bf_last->bf_mpdu;
+				tbf->bf_node = bf_last->bf_node;
+				tbf->bf_buf_addr = bf_last->bf_buf_addr;
+				*(tbf->bf_desc) = *(bf_last->bf_desc);
+
+				/* link it to the frame */
+				if (bf_lastq) {
+					bf_lastq->bf_desc->ds_link =
+						tbf->bf_daddr;
+					bf->bf_lastfrm = tbf;
+					ath9k_hw_cleartxdesc(sc->sc_ah,
+						bf->bf_lastfrm->bf_desc);
+				} else {
+					tbf->bf_state = bf_last->bf_state;
+					tbf->bf_lastfrm = tbf;
+					ath9k_hw_cleartxdesc(sc->sc_ah,
+						tbf->bf_lastfrm->bf_desc);
+
+					/* copy the DMA context */
+					copy_dma_mem_context(
+						get_dma_mem_context(tbf,
+							bf_dmacontext),
+						get_dma_mem_context(bf_last,
+							bf_dmacontext));
+				}
+				list_add_tail(&tbf->list, &bf_head);
+			} else {
+				/*
+				 * Clear descriptor status words for
+				 * software retry
+				 */
+				ath9k_hw_cleartxdesc(sc->sc_ah,
+					bf->bf_lastfrm->bf_desc);
+			}
+
+			/*
+			 * Put this buffer to the temporary pending
+			 * queue to retain ordering
+			 */
+			list_splice_tail_init(&bf_head, &bf_pending);
+		}
+
+		bf = bf_next;
+	}
+
+	/*
+	 * node is already gone. no more assocication
+	 * with the node. the node might have been freed
+	 * any  node acces can result in panic.note tid
+	 * is part of the node.
+	 */
+	if (isnodegone)
+		return;
+
+	if (tid->cleanup_inprogress) {
+		/* check to see if we're done with cleaning the h/w queue */
+		spin_lock_bh(&txq->axq_lock);
+
+		if (tid->baw_head == tid->baw_tail) {
+			tid->addba_exchangecomplete = 0;
+			tid->addba_exchangeattempts = 0;
+			spin_unlock_bh(&txq->axq_lock);
+
+			tid->cleanup_inprogress = false;
+
+			/* send buffered frames as singles */
+			ath_tx_flush_tid(sc, tid);
+		} else
+			spin_unlock_bh(&txq->axq_lock);
+
+		return;
+	}
+
+	/*
+	 * prepend un-acked frames to the beginning of the pending frame queue
+	 */
+	if (!list_empty(&bf_pending)) {
+		spin_lock_bh(&txq->axq_lock);
+		/* Note: we _prepend_, we _do_not_ at to
+		 * the end of the queue ! */
+		list_splice(&bf_pending, &tid->buf_q);
+		ath_tx_queue_tid(txq, tid);
+		spin_unlock_bh(&txq->axq_lock);
+	}
+
+	if (needreset)
+		ath_internal_reset(sc);
+
+	return;
+}
+
+/* Process completed xmit descriptors from the specified queue */
+
+static int ath_tx_processq(struct ath_softc *sc, struct ath_txq *txq)
+{
+	struct ath_hal *ah = sc->sc_ah;
+	struct ath_buf *bf, *lastbf, *bf_held = NULL;
+	struct list_head bf_head;
+	struct ath_desc *ds, *tmp_ds;
+	struct sk_buff *skb;
+	struct ieee80211_tx_info *tx_info;
+	struct ath_tx_info_priv *tx_info_priv;
+	int nacked, txok, nbad = 0, isrifs = 0;
+	int status;
+
+	DPRINTF(sc, ATH_DBG_QUEUE,
+		"%s: tx queue %d (%x), link %p\n", __func__,
+		txq->axq_qnum, ath9k_hw_gettxbuf(sc->sc_ah, txq->axq_qnum),
+		txq->axq_link);
+
+	nacked = 0;
+	for (;;) {
+		spin_lock_bh(&txq->axq_lock);
+		txq->axq_intrcnt = 0; /* reset periodic desc intr count */
+		if (list_empty(&txq->axq_q)) {
+			txq->axq_link = NULL;
+			txq->axq_linkbuf = NULL;
+			spin_unlock_bh(&txq->axq_lock);
+			break;
+		}
+		bf = list_first_entry(&txq->axq_q, struct ath_buf, list);
+
+		/*
+		 * There is a race condition that a BH gets scheduled
+		 * after sw writes TxE and before hw re-load the last
+		 * descriptor to get the newly chained one.
+		 * Software must keep the last DONE descriptor as a
+		 * holding descriptor - software does so by marking
+		 * it with the STALE flag.
+		 */
+		bf_held = NULL;
+		if (bf->bf_status & ATH_BUFSTATUS_STALE) {
+			bf_held = bf;
+			if (list_is_last(&bf_held->list, &txq->axq_q)) {
+				/* FIXME:
+				 * The holding descriptor is the last
+				 * descriptor in queue. It's safe to remove
+				 * the last holding descriptor in BH context.
+				 */
+				spin_unlock_bh(&txq->axq_lock);
+				break;
+			} else {
+				/* Lets work with the next buffer now */
+				bf = list_entry(bf_held->list.next,
+					struct ath_buf, list);
+			}
+		}
+
+		lastbf = bf->bf_lastbf;
+		ds = lastbf->bf_desc;    /* NB: last decriptor */
+
+		status = ath9k_hw_txprocdesc(ah, ds);
+		if (status == -EINPROGRESS) {
+			spin_unlock_bh(&txq->axq_lock);
+			break;
+		}
+		if (bf->bf_desc == txq->axq_lastdsWithCTS)
+			txq->axq_lastdsWithCTS = NULL;
+		if (ds == txq->axq_gatingds)
+			txq->axq_gatingds = NULL;
+
+		/*
+		 * Remove ath_buf's of the same transmit unit from txq,
+		 * however leave the last descriptor back as the holding
+		 * descriptor for hw.
+		 */
+		lastbf->bf_status |= ATH_BUFSTATUS_STALE;
+		INIT_LIST_HEAD(&bf_head);
+
+		if (!list_is_singular(&lastbf->list))
+			list_cut_position(&bf_head,
+				&txq->axq_q, lastbf->list.prev);
+
+		txq->axq_depth--;
+
+		if (bf->bf_isaggr)
+			txq->axq_aggr_depth--;
+
+		txok = (ds->ds_txstat.ts_status == 0);
+
+		spin_unlock_bh(&txq->axq_lock);
+
+		if (bf_held) {
+			list_del(&bf_held->list);
+			spin_lock_bh(&sc->sc_txbuflock);
+			list_add_tail(&bf_held->list, &sc->sc_txbuf);
+			spin_unlock_bh(&sc->sc_txbuflock);
+		}
+
+		if (!bf->bf_isampdu) {
+			/*
+			 * This frame is sent out as a single frame.
+			 * Use hardware retry status for this frame.
+			 */
+			bf->bf_retries = ds->ds_txstat.ts_longretry;
+			if (ds->ds_txstat.ts_status & ATH9K_TXERR_XRETRY)
+				bf->bf_isxretried = 1;
+			nbad = 0;
+		} else {
+			nbad = ath_tx_num_badfrms(sc, bf, txok);
+		}
+		skb = bf->bf_mpdu;
+		tx_info = IEEE80211_SKB_CB(skb);
+		tx_info_priv = (struct ath_tx_info_priv *)
+			tx_info->driver_data[0];
+		if (ds->ds_txstat.ts_status & ATH9K_TXERR_FILT)
+			tx_info->flags |= IEEE80211_TX_STAT_TX_FILTERED;
+		if ((ds->ds_txstat.ts_status & ATH9K_TXERR_FILT) == 0 &&
+				(bf->bf_flags & ATH9K_TXDESC_NOACK) == 0) {
+			if (ds->ds_txstat.ts_status == 0)
+				nacked++;
+
+			if (bf->bf_isdata) {
+				if (isrifs)
+					tmp_ds = bf->bf_rifslast->bf_desc;
+				else
+					tmp_ds = ds;
+				memcpy(&tx_info_priv->tx,
+					&tmp_ds->ds_txstat,
+					sizeof(tx_info_priv->tx));
+				tx_info_priv->n_frames = bf->bf_nframes;
+				tx_info_priv->n_bad_frames = nbad;
+			}
+		}
+
+		/*
+		 * Complete this transmit unit
+		 */
+		if (bf->bf_isampdu)
+			ath_tx_complete_aggr_rifs(sc, txq, bf, &bf_head, txok);
+		else
+			ath_tx_complete_buf(sc, bf, &bf_head, txok, 0);
+
+		/* Wake up mac80211 queue */
+
+		spin_lock_bh(&txq->axq_lock);
+		if (txq->stopped && ath_txq_depth(sc, txq->axq_qnum) <=
+				(ATH_TXBUF - 20)) {
+			int qnum;
+			qnum = ath_get_mac80211_qnum(txq->axq_qnum, sc);
+			if (qnum != -1) {
+				ieee80211_wake_queue(sc->hw, qnum);
+				txq->stopped = 0;
+			}
+
+		}
+
+		/*
+		 * schedule any pending packets if aggregation is enabled
+		 */
+		if (sc->sc_txaggr)
+			ath_txq_schedule(sc, txq);
+		spin_unlock_bh(&txq->axq_lock);
+	}
+	return nacked;
+}
+
+static void ath_tx_stopdma(struct ath_softc *sc, struct ath_txq *txq)
+{
+	struct ath_hal *ah = sc->sc_ah;
+
+	(void) ath9k_hw_stoptxdma(ah, txq->axq_qnum);
+	DPRINTF(sc, ATH_DBG_XMIT, "%s: tx queue [%u] %x, link %p\n",
+		__func__, txq->axq_qnum,
+		ath9k_hw_gettxbuf(ah, txq->axq_qnum), txq->axq_link);
+}
+
+/* Drain only the data queues */
+
+static void ath_drain_txdataq(struct ath_softc *sc, bool retry_tx)
+{
+	struct ath_hal *ah = sc->sc_ah;
+	int i;
+	int npend = 0;
+	enum ath9k_ht_macmode ht_macmode = ath_cwm_macmode(sc);
+
+	/* XXX return value */
+	if (!sc->sc_invalid) {
+		for (i = 0; i < ATH9K_NUM_TX_QUEUES; i++) {
+			if (ATH_TXQ_SETUP(sc, i)) {
+				ath_tx_stopdma(sc, &sc->sc_txq[i]);
+
+				/* The TxDMA may not really be stopped.
+				 * Double check the hal tx pending count */
+				npend += ath9k_hw_numtxpending(ah,
+					sc->sc_txq[i].axq_qnum);
+			}
+		}
+	}
+
+	if (npend) {
+		int status;
+
+		/* TxDMA not stopped, reset the hal */
+		DPRINTF(sc, ATH_DBG_XMIT,
+			"%s: Unable to stop TxDMA. Reset HAL!\n", __func__);
+
+		spin_lock_bh(&sc->sc_resetlock);
+		if (!ath9k_hw_reset(ah, sc->sc_opmode,
+			&sc->sc_curchan, ht_macmode,
+			sc->sc_tx_chainmask, sc->sc_rx_chainmask,
+			sc->sc_ht_extprotspacing, true, &status)) {
+
+			DPRINTF(sc, ATH_DBG_FATAL,
+				"%s: unable to reset hardware; hal status %u\n",
+				__func__,
+				status);
+		}
+		spin_unlock_bh(&sc->sc_resetlock);
+	}
+
+	for (i = 0; i < ATH9K_NUM_TX_QUEUES; i++) {
+		if (ATH_TXQ_SETUP(sc, i))
+			ath_tx_draintxq(sc, &sc->sc_txq[i], retry_tx);
+	}
+}
+
+/* Add a sub-frame to block ack window */
+
+static void ath_tx_addto_baw(struct ath_softc *sc,
+			     struct ath_atx_tid *tid,
+			     struct ath_buf *bf)
+{
+	int index, cindex;
+
+	if (bf->bf_isretried)
+		return;
+
+	index  = ATH_BA_INDEX(tid->seq_start, bf->bf_seqno);
+	cindex = (tid->baw_head + index) & (ATH_TID_MAX_BUFS - 1);
+
+	ASSERT(tid->tx_buf[cindex] == NULL);
+	tid->tx_buf[cindex] = bf;
+
+	if (index >= ((tid->baw_tail - tid->baw_head) &
+		(ATH_TID_MAX_BUFS - 1))) {
+		tid->baw_tail = cindex;
+		INCR(tid->baw_tail, ATH_TID_MAX_BUFS);
+	}
+}
+
+/*
+ * Function to send an A-MPDU
+ * NB: must be called with txq lock held
+ */
+
+static int ath_tx_send_ampdu(struct ath_softc *sc,
+			     struct ath_txq *txq,
+			     struct ath_atx_tid *tid,
+			     struct list_head *bf_head,
+			     struct ath_tx_control *txctl)
+{
+	struct ath_buf *bf;
+	struct sk_buff *skb;
+	struct ieee80211_tx_info *tx_info;
+	struct ath_tx_info_priv *tx_info_priv;
+
+	BUG_ON(list_empty(bf_head));
+
+	bf = list_first_entry(bf_head, struct ath_buf, list);
+	bf->bf_isampdu = 1;
+	bf->bf_seqno = txctl->seqno; /* save seqno and tidno in buffer */
+	bf->bf_tidno = txctl->tidno;
+
+	/*
+	 * Do not queue to h/w when any of the following conditions is true:
+	 * - there are pending frames in software queue
+	 * - the TID is currently paused for ADDBA/BAR request
+	 * - seqno is not within block-ack window
+	 * - h/w queue depth exceeds low water mark
+	 */
+	if (!list_empty(&tid->buf_q) || tid->paused ||
+	    !BAW_WITHIN(tid->seq_start, tid->baw_size, bf->bf_seqno) ||
+	    txq->axq_depth >= ATH_AGGR_MIN_QDEPTH) {
+		/*
+		 * Add this frame to software queue for scheduling later
+		 * for aggregation.
+		 */
+		list_splice_tail_init(bf_head, &tid->buf_q);
+		ath_tx_queue_tid(txq, tid);
+		return 0;
+	}
+
+	skb = (struct sk_buff *)bf->bf_mpdu;
+	tx_info = IEEE80211_SKB_CB(skb);
+	tx_info_priv = (struct ath_tx_info_priv *)tx_info->driver_data[0];
+	memcpy(bf->bf_rcs, tx_info_priv->rcs, 4 * sizeof(tx_info_priv->rcs[0]));
+
+	/* Add sub-frame to BAW */
+	ath_tx_addto_baw(sc, tid, bf);
+
+	/* Queue to h/w without aggregation */
+	bf->bf_nframes = 1;
+	bf->bf_lastbf = bf->bf_lastfrm; /* one single frame */
+	ath_buf_set_rate(sc, bf);
+	ath_tx_txqaddbuf(sc, txq, bf_head);
+	return 0;
+}
+
+/*
+ * looks up the rate
+ * returns aggr limit based on lowest of the rates
+ */
+
+static u32 ath_lookup_rate(struct ath_softc *sc,
+				 struct ath_buf *bf)
+{
+	const struct ath9k_rate_table *rt = sc->sc_currates;
+	struct sk_buff *skb;
+	struct ieee80211_tx_info *tx_info;
+	struct ath_tx_info_priv *tx_info_priv;
+	u32 max_4ms_framelen, frame_length;
+	u16 aggr_limit, legacy = 0, maxampdu;
+	int i;
+
+
+	skb = (struct sk_buff *)bf->bf_mpdu;
+	tx_info = IEEE80211_SKB_CB(skb);
+	tx_info_priv = (struct ath_tx_info_priv *)
+		tx_info->driver_data[0];
+	memcpy(bf->bf_rcs,
+		tx_info_priv->rcs, 4 * sizeof(tx_info_priv->rcs[0]));
+
+	/*
+	 * Find the lowest frame length among the rate series that will have a
+	 * 4ms transmit duration.
+	 * TODO - TXOP limit needs to be considered.
+	 */
+	max_4ms_framelen = ATH_AMPDU_LIMIT_MAX;
+
+	for (i = 0; i < 4; i++) {
+		if (bf->bf_rcs[i].tries) {
+			frame_length = bf->bf_rcs[i].max_4ms_framelen;
+
+			if (rt->info[bf->bf_rcs[i].rix].phy != PHY_HT) {
+				legacy = 1;
+				break;
+			}
+
+			max_4ms_framelen = min(max_4ms_framelen, frame_length);
+		}
+	}
+
+	/*
+	 * limit aggregate size by the minimum rate if rate selected is
+	 * not a probe rate, if rate selected is a probe rate then
+	 * avoid aggregation of this packet.
+	 */
+	if (tx_info->flags & IEEE80211_TX_CTL_RATE_CTRL_PROBE || legacy)
+		return 0;
+
+	aggr_limit = min(max_4ms_framelen,
+		(u32)ATH_AMPDU_LIMIT_DEFAULT);
+
+	/*
+	 * h/w can accept aggregates upto 16 bit lengths (65535).
+	 * The IE, however can hold upto 65536, which shows up here
+	 * as zero. Ignore 65536 since we  are constrained by hw.
+	 */
+	maxampdu = sc->sc_ht_info.maxampdu;
+	if (maxampdu)
+		aggr_limit = min(aggr_limit, maxampdu);
+
+	return aggr_limit;
+}
+
+/*
+ * returns the number of delimiters to be added to
+ * meet the minimum required mpdudensity.
+ * caller should make sure that the rate is  HT rate .
+ */
+
+static int ath_compute_num_delims(struct ath_softc *sc,
+				  struct ath_buf *bf,
+				  u16 frmlen)
+{
+	const struct ath9k_rate_table *rt = sc->sc_currates;
+	u32 nsymbits, nsymbols, mpdudensity;
+	u16 minlen;
+	u8 rc, flags, rix;
+	int width, half_gi, ndelim, mindelim;
+
+	/* Select standard number of delimiters based on frame length alone */
+	ndelim = ATH_AGGR_GET_NDELIM(frmlen);
+
+	/*
+	 * If encryption enabled, hardware requires some more padding between
+	 * subframes.
+	 * TODO - this could be improved to be dependent on the rate.
+	 *      The hardware can keep up at lower rates, but not higher rates
+	 */
+	if (bf->bf_keytype != ATH9K_KEY_TYPE_CLEAR)
+		ndelim += ATH_AGGR_ENCRYPTDELIM;
+
+	/*
+	 * Convert desired mpdu density from microeconds to bytes based
+	 * on highest rate in rate series (i.e. first rate) to determine
+	 * required minimum length for subframe. Take into account
+	 * whether high rate is 20 or 40Mhz and half or full GI.
+	 */
+	mpdudensity = sc->sc_ht_info.mpdudensity;
+
+	/*
+	 * If there is no mpdu density restriction, no further calculation
+	 * is needed.
+	 */
+	if (mpdudensity == 0)
+		return ndelim;
+
+	rix = bf->bf_rcs[0].rix;
+	flags = bf->bf_rcs[0].flags;
+	rc = rt->info[rix].rateCode;
+	width = (flags & ATH_RC_CW40_FLAG) ? 1 : 0;
+	half_gi = (flags & ATH_RC_SGI_FLAG) ? 1 : 0;
+
+	if (half_gi)
+		nsymbols = NUM_SYMBOLS_PER_USEC_HALFGI(mpdudensity);
+	else
+		nsymbols = NUM_SYMBOLS_PER_USEC(mpdudensity);
+
+	if (nsymbols == 0)
+		nsymbols = 1;
+
+	nsymbits = bits_per_symbol[HT_RC_2_MCS(rc)][width];
+	minlen = (nsymbols * nsymbits) / BITS_PER_BYTE;
+
+	/* Is frame shorter than required minimum length? */
+	if (frmlen < minlen) {
+		/* Get the minimum number of delimiters required. */
+		mindelim = (minlen - frmlen) / ATH_AGGR_DELIM_SZ;
+		ndelim = max(mindelim, ndelim);
+	}
+
+	return ndelim;
+}
+
+/*
+ * For aggregation from software buffer queue.
+ * NB: must be called with txq lock held
+ */
+
+static enum ATH_AGGR_STATUS ath_tx_form_aggr(struct ath_softc *sc,
+					struct ath_atx_tid *tid,
+					struct list_head *bf_q,
+					struct ath_buf **bf_last,
+					struct aggr_rifs_param *param,
+					int *prev_frames)
+{
+#define PADBYTES(_len) ((4 - ((_len) % 4)) % 4)
+	struct ath_buf *bf, *tbf, *bf_first, *bf_prev = NULL;
+	struct list_head bf_head;
+	int rl = 0, nframes = 0, ndelim;
+	u16 aggr_limit = 0, al = 0, bpad = 0,
+		al_delta, h_baw = tid->baw_size / 2;
+	enum ATH_AGGR_STATUS status = ATH_AGGR_DONE;
+	int prev_al = 0, is_ds_rate = 0;
+	INIT_LIST_HEAD(&bf_head);
+
+	BUG_ON(list_empty(&tid->buf_q));
+
+	bf_first = list_first_entry(&tid->buf_q, struct ath_buf, list);
+
+	do {
+		bf = list_first_entry(&tid->buf_q, struct ath_buf, list);
+
+		/*
+		 * do not step over block-ack window
+		 */
+		if (!BAW_WITHIN(tid->seq_start, tid->baw_size, bf->bf_seqno)) {
+			status = ATH_AGGR_BAW_CLOSED;
+			break;
+		}
+
+		if (!rl) {
+			aggr_limit = ath_lookup_rate(sc, bf);
+			rl = 1;
+			/*
+			 * Is rate dual stream
+			 */
+			is_ds_rate =
+				(bf->bf_rcs[0].flags & ATH_RC_DS_FLAG) ? 1 : 0;
+		}
+
+		/*
+		 * do not exceed aggregation limit
+		 */
+		al_delta = ATH_AGGR_DELIM_SZ + bf->bf_frmlen;
+
+		if (nframes && (aggr_limit <
+			(al + bpad + al_delta + prev_al))) {
+			status = ATH_AGGR_LIMITED;
+			break;
+		}
+
+		/*
+		 * do not exceed subframe limit
+		 */
+		if ((nframes + *prev_frames) >=
+		    min((int)h_baw, ATH_AMPDU_SUBFRAME_DEFAULT)) {
+			status = ATH_AGGR_LIMITED;
+			break;
+		}
+
+		/*
+		 * add padding for previous frame to aggregation length
+		 */
+		al += bpad + al_delta;
+
+		/*
+		 * Get the delimiters needed to meet the MPDU
+		 * density for this node.
+		 */
+		ndelim = ath_compute_num_delims(sc, bf_first, bf->bf_frmlen);
+
+		bpad = PADBYTES(al_delta) + (ndelim << 2);
+
+		bf->bf_next = NULL;
+		bf->bf_lastfrm->bf_desc->ds_link = 0;
+
+		/*
+		 * this packet is part of an aggregate
+		 * - remove all descriptors belonging to this frame from
+		 *   software queue
+		 * - add it to block ack window
+		 * - set up descriptors for aggregation
+		 */
+		list_cut_position(&bf_head, &tid->buf_q, &bf->bf_lastfrm->list);
+		ath_tx_addto_baw(sc, tid, bf);
+
+		list_for_each_entry(tbf, &bf_head, list) {
+			ath9k_hw_set11n_aggr_middle(sc->sc_ah,
+				tbf->bf_desc, ndelim);
+		}
+
+		/*
+		 * link buffers of this frame to the aggregate
+		 */
+		list_splice_tail_init(&bf_head, bf_q);
+		nframes++;
+
+		if (bf_prev) {
+			bf_prev->bf_next = bf;
+			bf_prev->bf_lastfrm->bf_desc->ds_link = bf->bf_daddr;
+		}
+		bf_prev = bf;
+
+#ifdef AGGR_NOSHORT
+		/*
+		 * terminate aggregation on a small packet boundary
+		 */
+		if (bf->bf_frmlen < ATH_AGGR_MINPLEN) {
+			status = ATH_AGGR_SHORTPKT;
+			break;
+		}
+#endif
+	} while (!list_empty(&tid->buf_q));
+
+	bf_first->bf_al = al;
+	bf_first->bf_nframes = nframes;
+	*bf_last = bf_prev;
+	return status;
+#undef PADBYTES
+}
+
+/*
+ * process pending frames possibly doing a-mpdu aggregation
+ * NB: must be called with txq lock held
+ */
+
+static void ath_tx_sched_aggr(struct ath_softc *sc,
+	struct ath_txq *txq, struct ath_atx_tid *tid)
+{
+	struct ath_buf *bf, *tbf, *bf_last, *bf_lastaggr = NULL;
+	enum ATH_AGGR_STATUS status;
+	struct list_head bf_q;
+	struct aggr_rifs_param param = {0, 0, 0, 0, NULL};
+	int prev_frames = 0;
+
+	do {
+		if (list_empty(&tid->buf_q))
+			return;
+
+		INIT_LIST_HEAD(&bf_q);
+
+		status = ath_tx_form_aggr(sc, tid, &bf_q, &bf_lastaggr, &param,
+					  &prev_frames);
+
+		/*
+		 * no frames picked up to be aggregated; block-ack
+		 * window is not open
+		 */
+		if (list_empty(&bf_q))
+			break;
+
+		bf = list_first_entry(&bf_q, struct ath_buf, list);
+		bf_last = list_entry(bf_q.prev, struct ath_buf, list);
+		bf->bf_lastbf = bf_last;
+
+		/*
+		 * if only one frame, send as non-aggregate
+		 */
+		if (bf->bf_nframes == 1) {
+			ASSERT(bf->bf_lastfrm == bf_last);
+
+			bf->bf_isaggr = 0;
+			/*
+			 * clear aggr bits for every descriptor
+			 * XXX TODO: is there a way to optimize it?
+			 */
+			list_for_each_entry(tbf, &bf_q, list) {
+				ath9k_hw_clr11n_aggr(sc->sc_ah, tbf->bf_desc);
+			}
+
+			ath_buf_set_rate(sc, bf);
+			ath_tx_txqaddbuf(sc, txq, &bf_q);
+			continue;
+		}
+
+		/*
+		 * setup first desc with rate and aggr info
+		 */
+		bf->bf_isaggr  = 1;
+		ath_buf_set_rate(sc, bf);
+		ath9k_hw_set11n_aggr_first(sc->sc_ah, bf->bf_desc, bf->bf_al);
+
+		/*
+		 * anchor last frame of aggregate correctly
+		 */
+		ASSERT(bf_lastaggr);
+		ASSERT(bf_lastaggr->bf_lastfrm == bf_last);
+		tbf = bf_lastaggr;
+		ath9k_hw_set11n_aggr_last(sc->sc_ah, tbf->bf_desc);
+
+		/* XXX: We don't enter into this loop, consider removing this */
+		while (!list_empty(&bf_q) && !list_is_last(&tbf->list, &bf_q)) {
+			tbf = list_entry(tbf->list.next, struct ath_buf, list);
+			ath9k_hw_set11n_aggr_last(sc->sc_ah, tbf->bf_desc);
+		}
+
+		txq->axq_aggr_depth++;
+
+		/*
+		 * Normal aggregate, queue to hardware
+		 */
+		ath_tx_txqaddbuf(sc, txq, &bf_q);
+
+	} while (txq->axq_depth < ATH_AGGR_MIN_QDEPTH &&
+		 status != ATH_AGGR_BAW_CLOSED);
+}
+
+/* Called with txq lock held */
+
+static void ath_tid_drain(struct ath_softc *sc,
+			  struct ath_txq *txq,
+			  struct ath_atx_tid *tid,
+			  bool bh_flag)
+{
+	struct ath_buf *bf;
+	struct list_head bf_head;
+	INIT_LIST_HEAD(&bf_head);
+
+	for (;;) {
+		if (list_empty(&tid->buf_q))
+			break;
+		bf = list_first_entry(&tid->buf_q, struct ath_buf, list);
+
+		list_cut_position(&bf_head, &tid->buf_q, &bf->bf_lastfrm->list);
+
+		/* update baw for software retried frame */
+		if (bf->bf_isretried)
+			ath_tx_update_baw(sc, tid, bf->bf_seqno);
+
+		/*
+		 * do not indicate packets while holding txq spinlock.
+		 * unlock is intentional here
+		 */
+		if (likely(bh_flag))
+			spin_unlock_bh(&txq->axq_lock);
+		else
+			spin_unlock(&txq->axq_lock);
+
+		/* complete this sub-frame */
+		ath_tx_complete_buf(sc, bf, &bf_head, 0, 0);
+
+		if (likely(bh_flag))
+			spin_lock_bh(&txq->axq_lock);
+		else
+			spin_lock(&txq->axq_lock);
+	}
+
+	/*
+	 * TODO: For frame(s) that are in the retry state, we will reuse the
+	 * sequence number(s) without setting the retry bit. The
+	 * alternative is to give up on these and BAR the receiver's window
+	 * forward.
+	 */
+	tid->seq_next = tid->seq_start;
+	tid->baw_tail = tid->baw_head;
+}
+
+/*
+ * Drain all pending buffers
+ * NB: must be called with txq lock held
+ */
+
+static void ath_txq_drain_pending_buffers(struct ath_softc *sc,
+					  struct ath_txq *txq,
+					  bool bh_flag)
+{
+	struct ath_atx_ac *ac, *ac_tmp;
+	struct ath_atx_tid *tid, *tid_tmp;
+
+	list_for_each_entry_safe(ac, ac_tmp, &txq->axq_acq, list) {
+		list_del(&ac->list);
+		ac->sched = false;
+		list_for_each_entry_safe(tid, tid_tmp, &ac->tid_q, list) {
+			list_del(&tid->list);
+			tid->sched = false;
+			ath_tid_drain(sc, txq, tid, bh_flag);
+		}
+	}
+}
+
+static int ath_tx_start_dma(struct ath_softc *sc,
+			    struct sk_buff *skb,
+			    struct scatterlist *sg,
+			    u32 n_sg,
+			    struct ath_tx_control *txctl)
+{
+	struct ath_node *an = txctl->an;
+	struct ath_buf *bf = NULL;
+	struct list_head bf_head;
+	struct ath_desc *ds;
+	struct ath_hal *ah = sc->sc_ah;
+	struct ath_txq *txq = &sc->sc_txq[txctl->qnum];
+	struct ath_tx_info_priv *tx_info_priv;
+	struct ath_rc_series *rcs;
+	struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data;
+	struct ieee80211_tx_info *tx_info =  IEEE80211_SKB_CB(skb);
+	__le16 fc = hdr->frame_control;
+
+	/* For each sglist entry, allocate an ath_buf for DMA */
+	INIT_LIST_HEAD(&bf_head);
+	spin_lock_bh(&sc->sc_txbuflock);
+	if (unlikely(list_empty(&sc->sc_txbuf))) {
+		spin_unlock_bh(&sc->sc_txbuflock);
+		return -ENOMEM;
+	}
+
+	bf = list_first_entry(&sc->sc_txbuf, struct ath_buf, list);
+	list_del(&bf->list);
+	spin_unlock_bh(&sc->sc_txbuflock);
+
+	list_add_tail(&bf->list, &bf_head);
+
+	/* set up this buffer */
+	ATH_TXBUF_RESET(bf);
+	bf->bf_frmlen = txctl->frmlen;
+	bf->bf_isdata = ieee80211_is_data(fc);
+	bf->bf_isbar = ieee80211_is_back_req(fc);
+	bf->bf_ispspoll = ieee80211_is_pspoll(fc);
+	bf->bf_flags = txctl->flags;
+	bf->bf_shpreamble = sc->sc_flags & ATH_PREAMBLE_SHORT;
+	bf->bf_keytype = txctl->keytype;
+	tx_info_priv = (struct ath_tx_info_priv *)tx_info->driver_data[0];
+	rcs = tx_info_priv->rcs;
+	bf->bf_rcs[0] = rcs[0];
+	bf->bf_rcs[1] = rcs[1];
+	bf->bf_rcs[2] = rcs[2];
+	bf->bf_rcs[3] = rcs[3];
+	bf->bf_node = an;
+	bf->bf_mpdu = skb;
+	bf->bf_buf_addr = sg_dma_address(sg);
+
+	/* setup descriptor */
+	ds = bf->bf_desc;
+	ds->ds_link = 0;
+	ds->ds_data = bf->bf_buf_addr;
+
+	/*
+	 * Save the DMA context in the first ath_buf
+	 */
+	copy_dma_mem_context(get_dma_mem_context(bf, bf_dmacontext),
+			     get_dma_mem_context(txctl, dmacontext));
+
+	/*
+	 * Formulate first tx descriptor with tx controls.
+	 */
+	ath9k_hw_set11n_txdesc(ah,
+			       ds,
+			       bf->bf_frmlen, /* frame length */
+			       txctl->atype, /* Atheros packet type */
+			       min(txctl->txpower, (u16)60), /* txpower */
+			       txctl->keyix,            /* key cache index */
+			       txctl->keytype,          /* key type */
+			       txctl->flags);           /* flags */
+	ath9k_hw_filltxdesc(ah,
+			    ds,
+			    sg_dma_len(sg),     /* segment length */
+			    true,            /* first segment */
+			    (n_sg == 1) ? true : false, /* last segment */
+			    ds);                /* first descriptor */
+
+	bf->bf_lastfrm = bf;
+	bf->bf_ht = txctl->ht;
+
+	spin_lock_bh(&txq->axq_lock);
+
+	if (txctl->ht && sc->sc_txaggr) {
+		struct ath_atx_tid *tid = ATH_AN_2_TID(an, txctl->tidno);
+		if (ath_aggr_query(sc, an, txctl->tidno)) {
+			/*
+			 * Try aggregation if it's a unicast data frame
+			 * and the destination is HT capable.
+			 */
+			ath_tx_send_ampdu(sc, txq, tid, &bf_head, txctl);
+		} else {
+			/*
+			 * Send this frame as regular when ADDBA exchange
+			 * is neither complete nor pending.
+			 */
+			ath_tx_send_normal(sc, txq, tid, &bf_head);
+		}
+	} else {
+		bf->bf_lastbf = bf;
+		bf->bf_nframes = 1;
+		ath_buf_set_rate(sc, bf);
+
+		if (ieee80211_is_back_req(fc)) {
+			/* This is required for resuming tid
+			 * during BAR completion */
+			bf->bf_tidno = txctl->tidno;
+		}
+
+		if (is_multicast_ether_addr(hdr->addr1)) {
+			struct ath_vap *avp = sc->sc_vaps[txctl->if_id];
+
+			/*
+			 * When servicing one or more stations in power-save
+			 * mode (or) if there is some mcast data waiting on
+			 * mcast queue (to prevent out of order delivery of
+			 * mcast,bcast packets) multicast frames must be
+			 * buffered until after the beacon. We use the private
+			 * mcast queue for that.
+			 */
+			/* XXX? more bit in 802.11 frame header */
+			spin_lock_bh(&avp->av_mcastq.axq_lock);
+			if (txctl->ps || avp->av_mcastq.axq_depth)
+				ath_tx_mcastqaddbuf(sc,
+					&avp->av_mcastq, &bf_head);
+			else
+				ath_tx_txqaddbuf(sc, txq, &bf_head);
+			spin_unlock_bh(&avp->av_mcastq.axq_lock);
+		} else
+			ath_tx_txqaddbuf(sc, txq, &bf_head);
+	}
+	spin_unlock_bh(&txq->axq_lock);
+	return 0;
+}
+
+static void xmit_map_sg(struct ath_softc *sc,
+			struct sk_buff *skb,
+			dma_addr_t *pa,
+			struct ath_tx_control *txctl)
+{
+	struct ath_xmit_status tx_status;
+	struct ath_atx_tid *tid;
+	struct scatterlist sg;
+
+	*pa = pci_map_single(sc->pdev, skb->data, skb->len, PCI_DMA_TODEVICE);
+
+	/* setup S/G list */
+	memset(&sg, 0, sizeof(struct scatterlist));
+	sg_dma_address(&sg) = *pa;
+	sg_dma_len(&sg) = skb->len;
+
+	if (ath_tx_start_dma(sc, skb, &sg, 1, txctl) != 0) {
+		/*
+		 *  We have to do drop frame here.
+		 */
+		pci_unmap_single(sc->pdev, *pa, skb->len, PCI_DMA_TODEVICE);
+
+		tx_status.retries = 0;
+		tx_status.flags = ATH_TX_ERROR;
+
+		if (txctl->ht && sc->sc_txaggr) {
+			/* Reclaim the seqno. */
+			tid = ATH_AN_2_TID((struct ath_node *)
+				txctl->an, txctl->tidno);
+			DECR(tid->seq_next, IEEE80211_SEQ_MAX);
+		}
+		ath_tx_complete(sc, skb, &tx_status, txctl->an);
+	}
+}
+
+/* Initialize TX queue and h/w */
+
+int ath_tx_init(struct ath_softc *sc, int nbufs)
+{
+	int error = 0;
+
+	do {
+		spin_lock_init(&sc->sc_txbuflock);
+
+		/* Setup tx descriptors */
+		error = ath_descdma_setup(sc, &sc->sc_txdma, &sc->sc_txbuf,
+			"tx", nbufs * ATH_FRAG_PER_MSDU, ATH_TXDESC);
+		if (error != 0) {
+			DPRINTF(sc, ATH_DBG_FATAL,
+				"%s: failed to allocate tx descriptors: %d\n",
+				__func__, error);
+			break;
+		}
+
+		/* XXX allocate beacon state together with vap */
+		error = ath_descdma_setup(sc, &sc->sc_bdma, &sc->sc_bbuf,
+					  "beacon", ATH_BCBUF, 1);
+		if (error != 0) {
+			DPRINTF(sc, ATH_DBG_FATAL,
+				"%s: failed to allocate "
+				"beacon descripotrs: %d\n",
+				__func__, error);
+			break;
+		}
+
+	} while (0);
+
+	if (error != 0)
+		ath_tx_cleanup(sc);
+
+	return error;
+}
+
+/* Reclaim all tx queue resources */
+
+int ath_tx_cleanup(struct ath_softc *sc)
+{
+	/* cleanup beacon descriptors */
+	if (sc->sc_bdma.dd_desc_len != 0)
+		ath_descdma_cleanup(sc, &sc->sc_bdma, &sc->sc_bbuf);
+
+	/* cleanup tx descriptors */
+	if (sc->sc_txdma.dd_desc_len != 0)
+		ath_descdma_cleanup(sc, &sc->sc_txdma, &sc->sc_txbuf);
+
+	return 0;
+}
+
+/* Setup a h/w transmit queue */
+
+struct ath_txq *ath_txq_setup(struct ath_softc *sc, int qtype, int subtype)
+{
+	struct ath_hal *ah = sc->sc_ah;
+	struct ath9k_tx_queue_info qi;
+	int qnum;
+
+	memzero(&qi, sizeof(qi));
+	qi.tqi_subtype = subtype;
+	qi.tqi_aifs = ATH9K_TXQ_USEDEFAULT;
+	qi.tqi_cwmin = ATH9K_TXQ_USEDEFAULT;
+	qi.tqi_cwmax = ATH9K_TXQ_USEDEFAULT;
+	qi.tqi_physCompBuf = 0;
+
+	/*
+	 * Enable interrupts only for EOL and DESC conditions.
+	 * We mark tx descriptors to receive a DESC interrupt
+	 * when a tx queue gets deep; otherwise waiting for the
+	 * EOL to reap descriptors.  Note that this is done to
+	 * reduce interrupt load and this only defers reaping
+	 * descriptors, never transmitting frames.  Aside from
+	 * reducing interrupts this also permits more concurrency.
+	 * The only potential downside is if the tx queue backs
+	 * up in which case the top half of the kernel may backup
+	 * due to a lack of tx descriptors.
+	 *
+	 * The UAPSD queue is an exception, since we take a desc-
+	 * based intr on the EOSP frames.
+	 */
+	if (qtype == ATH9K_TX_QUEUE_UAPSD)
+		qi.tqi_qflags = TXQ_FLAG_TXDESCINT_ENABLE;
+	else
+		qi.tqi_qflags = TXQ_FLAG_TXEOLINT_ENABLE |
+			TXQ_FLAG_TXDESCINT_ENABLE;
+	qnum = ath9k_hw_setuptxqueue(ah, qtype, &qi);
+	if (qnum == -1) {
+		/*
+		 * NB: don't print a message, this happens
+		 * normally on parts with too few tx queues
+		 */
+		return NULL;
+	}
+	if (qnum >= ARRAY_SIZE(sc->sc_txq)) {
+		DPRINTF(sc, ATH_DBG_FATAL,
+			"%s: hal qnum %u out of range, max %u!\n",
+			__func__, qnum, (unsigned int)ARRAY_SIZE(sc->sc_txq));
+		ath9k_hw_releasetxqueue(ah, qnum);
+		return NULL;
+	}
+	if (!ATH_TXQ_SETUP(sc, qnum)) {
+		struct ath_txq *txq = &sc->sc_txq[qnum];
+
+		txq->axq_qnum = qnum;
+		txq->axq_link = NULL;
+		INIT_LIST_HEAD(&txq->axq_q);
+		INIT_LIST_HEAD(&txq->axq_acq);
+		spin_lock_init(&txq->axq_lock);
+		txq->axq_depth = 0;
+		txq->axq_aggr_depth = 0;
+		txq->axq_totalqueued = 0;
+		txq->axq_intrcnt = 0;
+		txq->axq_linkbuf = NULL;
+		sc->sc_txqsetup |= 1<<qnum;
+	}
+	return &sc->sc_txq[qnum];
+}
+
+/* Reclaim resources for a setup queue */
+
+void ath_tx_cleanupq(struct ath_softc *sc, struct ath_txq *txq)
+{
+	ath9k_hw_releasetxqueue(sc->sc_ah, txq->axq_qnum);
+	sc->sc_txqsetup &= ~(1<<txq->axq_qnum);
+}
+
+/*
+ * Setup a hardware data transmit queue for the specified
+ * access control.  The hal may not support all requested
+ * queues in which case it will return a reference to a
+ * previously setup queue.  We record the mapping from ac's
+ * to h/w queues for use by ath_tx_start and also track
+ * the set of h/w queues being used to optimize work in the
+ * transmit interrupt handler and related routines.
+ */
+
+int ath_tx_setup(struct ath_softc *sc, int haltype)
+{
+	struct ath_txq *txq;
+
+	if (haltype >= ARRAY_SIZE(sc->sc_haltype2q)) {
+		DPRINTF(sc, ATH_DBG_FATAL,
+			"%s: HAL AC %u out of range, max %zu!\n",
+			__func__, haltype, ARRAY_SIZE(sc->sc_haltype2q));
+		return 0;
+	}
+	txq = ath_txq_setup(sc, ATH9K_TX_QUEUE_DATA, haltype);
+	if (txq != NULL) {
+		sc->sc_haltype2q[haltype] = txq->axq_qnum;
+		return 1;
+	} else
+		return 0;
+}
+
+int ath_tx_get_qnum(struct ath_softc *sc, int qtype, int haltype)
+{
+	int qnum;
+
+	switch (qtype) {
+	case ATH9K_TX_QUEUE_DATA:
+		if (haltype >= ARRAY_SIZE(sc->sc_haltype2q)) {
+			DPRINTF(sc, ATH_DBG_FATAL,
+				"%s: HAL AC %u out of range, max %zu!\n",
+				__func__,
+				haltype, ARRAY_SIZE(sc->sc_haltype2q));
+			return -1;
+		}
+		qnum = sc->sc_haltype2q[haltype];
+		break;
+	case ATH9K_TX_QUEUE_BEACON:
+		qnum = sc->sc_bhalq;
+		break;
+	case ATH9K_TX_QUEUE_CAB:
+		qnum = sc->sc_cabq->axq_qnum;
+		break;
+	default:
+		qnum = -1;
+	}
+	return qnum;
+}
+
+/* Update parameters for a transmit queue */
+
+int ath_txq_update(struct ath_softc *sc, int qnum,
+		   struct ath9k_tx_queue_info *qinfo)
+{
+	struct ath_hal *ah = sc->sc_ah;
+	int error = 0;
+	struct ath9k_tx_queue_info qi;
+
+	if (qnum == sc->sc_bhalq) {
+		/*
+		 * XXX: for beacon queue, we just save the parameter.
+		 * It will be picked up by ath_beaconq_config when
+		 * it's necessary.
+		 */
+		sc->sc_beacon_qi = *qinfo;
+		return 0;
+	}
+
+	ASSERT(sc->sc_txq[qnum].axq_qnum == qnum);
+
+	ath9k_hw_get_txq_props(ah, qnum, &qi);
+	qi.tqi_aifs = qinfo->tqi_aifs;
+	qi.tqi_cwmin = qinfo->tqi_cwmin;
+	qi.tqi_cwmax = qinfo->tqi_cwmax;
+	qi.tqi_burstTime = qinfo->tqi_burstTime;
+	qi.tqi_readyTime = qinfo->tqi_readyTime;
+
+	if (!ath9k_hw_set_txq_props(ah, qnum, &qi)) {
+		DPRINTF(sc, ATH_DBG_FATAL,
+			"%s: unable to update hardware queue %u!\n",
+			__func__, qnum);
+		error = -EIO;
+	} else {
+		ath9k_hw_resettxqueue(ah, qnum); /* push to h/w */
+	}
+
+	return error;
+}
+
+int ath_cabq_update(struct ath_softc *sc)
+{
+	struct ath9k_tx_queue_info qi;
+	int qnum = sc->sc_cabq->axq_qnum;
+	struct ath_beacon_config conf;
+
+	ath9k_hw_get_txq_props(sc->sc_ah, qnum, &qi);
+	/*
+	 * Ensure the readytime % is within the bounds.
+	 */
+	if (sc->sc_config.cabqReadytime < ATH9K_READY_TIME_LO_BOUND)
+		sc->sc_config.cabqReadytime = ATH9K_READY_TIME_LO_BOUND;
+	else if (sc->sc_config.cabqReadytime > ATH9K_READY_TIME_HI_BOUND)
+		sc->sc_config.cabqReadytime = ATH9K_READY_TIME_HI_BOUND;
+
+	ath_get_beaconconfig(sc, ATH_IF_ID_ANY, &conf);
+	qi.tqi_readyTime =
+		(conf.beacon_interval * sc->sc_config.cabqReadytime) / 100;
+	ath_txq_update(sc, qnum, &qi);
+
+	return 0;
+}
+
+int ath_tx_start(struct ath_softc *sc, struct sk_buff *skb)
+{
+	struct ath_tx_control txctl;
+	int error = 0;
+
+	error = ath_tx_prepare(sc, skb, &txctl);
+	if (error == 0)
+		/*
+		 * Start DMA mapping.
+		 * ath_tx_start_dma() will be called either synchronously
+		 * or asynchrounsly once DMA is complete.
+		 */
+		xmit_map_sg(sc, skb,
+			    get_dma_mem_context(&txctl, dmacontext),
+			    &txctl);
+	else
+		ath_node_put(sc, txctl.an, ATH9K_BH_STATUS_CHANGE);
+
+	/* failed packets will be dropped by the caller */
+	return error;
+}
+
+/* Deferred processing of transmit interrupt */
+
+void ath_tx_tasklet(struct ath_softc *sc)
+{
+	u64 tsf = ath9k_hw_gettsf64(sc->sc_ah);
+	int i, nacked = 0;
+	u32 qcumask = ((1 << ATH9K_NUM_TX_QUEUES) - 1);
+
+	ath9k_hw_gettxintrtxqs(sc->sc_ah, &qcumask);
+
+	/*
+	 * Process each active queue.
+	 */
+	for (i = 0; i < ATH9K_NUM_TX_QUEUES; i++) {
+		if (ATH_TXQ_SETUP(sc, i) && (qcumask & (1 << i)))
+			nacked += ath_tx_processq(sc, &sc->sc_txq[i]);
+	}
+	if (nacked)
+		sc->sc_lastrx = tsf;
+}
+
+void ath_tx_draintxq(struct ath_softc *sc,
+	struct ath_txq *txq, bool retry_tx)
+{
+	struct ath_buf *bf, *lastbf;
+	struct list_head bf_head;
+
+	INIT_LIST_HEAD(&bf_head);
+
+	/*
+	 * NB: this assumes output has been stopped and
+	 *     we do not need to block ath_tx_tasklet
+	 */
+	for (;;) {
+		spin_lock_bh(&txq->axq_lock);
+
+		if (list_empty(&txq->axq_q)) {
+			txq->axq_link = NULL;
+			txq->axq_linkbuf = NULL;
+			spin_unlock_bh(&txq->axq_lock);
+			break;
+		}
+
+		bf = list_first_entry(&txq->axq_q, struct ath_buf, list);
+
+		if (bf->bf_status & ATH_BUFSTATUS_STALE) {
+			list_del(&bf->list);
+			spin_unlock_bh(&txq->axq_lock);
+
+			spin_lock_bh(&sc->sc_txbuflock);
+			list_add_tail(&bf->list, &sc->sc_txbuf);
+			spin_unlock_bh(&sc->sc_txbuflock);
+			continue;
+		}
+
+		lastbf = bf->bf_lastbf;
+		if (!retry_tx)
+			lastbf->bf_desc->ds_txstat.ts_flags =
+				ATH9K_TX_SW_ABORTED;
+
+		/* remove ath_buf's of the same mpdu from txq */
+		list_cut_position(&bf_head, &txq->axq_q, &lastbf->list);
+		txq->axq_depth--;
+
+		spin_unlock_bh(&txq->axq_lock);
+
+		if (bf->bf_isampdu)
+			ath_tx_complete_aggr_rifs(sc, txq, bf, &bf_head, 0);
+		else
+			ath_tx_complete_buf(sc, bf, &bf_head, 0, 0);
+	}
+
+	/* flush any pending frames if aggregation is enabled */
+	if (sc->sc_txaggr) {
+		if (!retry_tx) {
+			spin_lock_bh(&txq->axq_lock);
+			ath_txq_drain_pending_buffers(sc, txq,
+				ATH9K_BH_STATUS_CHANGE);
+			spin_unlock_bh(&txq->axq_lock);
+		}
+	}
+}
+
+/* Drain the transmit queues and reclaim resources */
+
+void ath_draintxq(struct ath_softc *sc, bool retry_tx)
+{
+	/* stop beacon queue. The beacon will be freed when
+	 * we go to INIT state */
+	if (!sc->sc_invalid) {
+		(void) ath9k_hw_stoptxdma(sc->sc_ah, sc->sc_bhalq);
+		DPRINTF(sc, ATH_DBG_XMIT, "%s: beacon queue %x\n", __func__,
+			ath9k_hw_gettxbuf(sc->sc_ah, sc->sc_bhalq));
+	}
+
+	ath_drain_txdataq(sc, retry_tx);
+}
+
+u32 ath_txq_depth(struct ath_softc *sc, int qnum)
+{
+	return sc->sc_txq[qnum].axq_depth;
+}
+
+u32 ath_txq_aggr_depth(struct ath_softc *sc, int qnum)
+{
+	return sc->sc_txq[qnum].axq_aggr_depth;
+}
+
+/* Check if an ADDBA is required. A valid node must be passed. */
+enum ATH_AGGR_CHECK ath_tx_aggr_check(struct ath_softc *sc,
+				      struct ath_node *an,
+				      u8 tidno)
+{
+	struct ath_atx_tid *txtid;
+	DECLARE_MAC_BUF(mac);
+
+	if (!sc->sc_txaggr)
+		return AGGR_NOT_REQUIRED;
+
+	/* ADDBA exchange must be completed before sending aggregates */
+	txtid = ATH_AN_2_TID(an, tidno);
+
+	if (txtid->addba_exchangecomplete)
+		return AGGR_EXCHANGE_DONE;
+
+	if (txtid->cleanup_inprogress)
+		return AGGR_CLEANUP_PROGRESS;
+
+	if (txtid->addba_exchangeinprogress)
+		return AGGR_EXCHANGE_PROGRESS;
+
+	if (!txtid->addba_exchangecomplete) {
+		if (!txtid->addba_exchangeinprogress &&
+		    (txtid->addba_exchangeattempts < ADDBA_EXCHANGE_ATTEMPTS)) {
+			txtid->addba_exchangeattempts++;
+			return AGGR_REQUIRED;
+		}
+	}
+
+	return AGGR_NOT_REQUIRED;
+}
+
+/* Start TX aggregation */
+
+int ath_tx_aggr_start(struct ath_softc *sc,
+		      const u8 *addr,
+		      u16 tid,
+		      u16 *ssn)
+{
+	struct ath_atx_tid *txtid;
+	struct ath_node *an;
+
+	spin_lock_bh(&sc->node_lock);
+	an = ath_node_find(sc, (u8 *) addr);
+	spin_unlock_bh(&sc->node_lock);
+
+	if (!an) {
+		DPRINTF(sc, ATH_DBG_AGGR,
+			"%s: Node not found to initialize "
+			"TX aggregation\n", __func__);
+		return -1;
+	}
+
+	if (sc->sc_txaggr) {
+		txtid = ATH_AN_2_TID(an, tid);
+		txtid->addba_exchangeinprogress = 1;
+		ath_tx_pause_tid(sc, txtid);
+	}
+
+	return 0;
+}
+
+/* Stop tx aggregation */
+
+int ath_tx_aggr_stop(struct ath_softc *sc,
+		     const u8 *addr,
+		     u16 tid)
+{
+	struct ath_node *an;
+
+	spin_lock_bh(&sc->node_lock);
+	an = ath_node_find(sc, (u8 *) addr);
+	spin_unlock_bh(&sc->node_lock);
+
+	if (!an) {
+		DPRINTF(sc, ATH_DBG_AGGR,
+			"%s: TX aggr stop for non-existent node\n", __func__);
+		return -1;
+	}
+
+	ath_tx_aggr_teardown(sc, an, tid);
+	return 0;
+}
+
+/*
+ * Performs transmit side cleanup when TID changes from aggregated to
+ * unaggregated.
+ * - Pause the TID and mark cleanup in progress
+ * - Discard all retry frames from the s/w queue.
+ */
+
+void ath_tx_aggr_teardown(struct ath_softc *sc,
+	struct ath_node *an, u8 tid)
+{
+	struct ath_atx_tid *txtid = ATH_AN_2_TID(an, tid);
+	struct ath_txq *txq = &sc->sc_txq[txtid->ac->qnum];
+	struct ath_buf *bf;
+	struct list_head bf_head;
+	INIT_LIST_HEAD(&bf_head);
+
+	DPRINTF(sc, ATH_DBG_AGGR, "%s: teardown TX aggregation\n", __func__);
+
+	if (txtid->cleanup_inprogress) /* cleanup is in progress */
+		return;
+
+	if (!txtid->addba_exchangecomplete) {
+		txtid->addba_exchangeattempts = 0;
+		return;
+	}
+
+	/* TID must be paused first */
+	ath_tx_pause_tid(sc, txtid);
+
+	/* drop all software retried frames and mark this TID */
+	spin_lock_bh(&txq->axq_lock);
+	while (!list_empty(&txtid->buf_q)) {
+		bf = list_first_entry(&txtid->buf_q, struct ath_buf, list);
+		if (!bf->bf_isretried) {
+			/*
+			 * NB: it's based on the assumption that
+			 * software retried frame will always stay
+			 * at the head of software queue.
+			 */
+			break;
+		}
+		list_cut_position(&bf_head,
+			&txtid->buf_q, &bf->bf_lastfrm->list);
+		ath_tx_update_baw(sc, txtid, bf->bf_seqno);
+
+		/* complete this sub-frame */
+		ath_tx_complete_buf(sc, bf, &bf_head, 0, 0);
+	}
+
+	if (txtid->baw_head != txtid->baw_tail) {
+		spin_unlock_bh(&txq->axq_lock);
+		txtid->cleanup_inprogress = true;
+	} else {
+		txtid->addba_exchangecomplete = 0;
+		txtid->addba_exchangeattempts = 0;
+		spin_unlock_bh(&txq->axq_lock);
+		ath_tx_flush_tid(sc, txtid);
+	}
+}
+
+/*
+ * Tx scheduling logic
+ * NB: must be called with txq lock held
+ */
+
+void ath_txq_schedule(struct ath_softc *sc, struct ath_txq *txq)
+{
+	struct ath_atx_ac *ac;
+	struct ath_atx_tid *tid;
+
+	/* nothing to schedule */
+	if (list_empty(&txq->axq_acq))
+		return;
+	/*
+	 * get the first node/ac pair on the queue
+	 */
+	ac = list_first_entry(&txq->axq_acq, struct ath_atx_ac, list);
+	list_del(&ac->list);
+	ac->sched = false;
+
+	/*
+	 * process a single tid per destination
+	 */
+	do {
+		/* nothing to schedule */
+		if (list_empty(&ac->tid_q))
+			return;
+
+		tid = list_first_entry(&ac->tid_q, struct ath_atx_tid, list);
+		list_del(&tid->list);
+		tid->sched = false;
+
+		if (tid->paused)    /* check next tid to keep h/w busy */
+			continue;
+
+		if (!(tid->an->an_smmode == ATH_SM_PWRSAV_DYNAMIC) ||
+		    ((txq->axq_depth % 2) == 0)) {
+			ath_tx_sched_aggr(sc, txq, tid);
+		}
+
+		/*
+		 * add tid to round-robin queue if more frames
+		 * are pending for the tid
+		 */
+		if (!list_empty(&tid->buf_q))
+			ath_tx_queue_tid(txq, tid);
+
+		/* only schedule one TID at a time */
+		break;
+	} while (!list_empty(&ac->tid_q));
+
+	/*
+	 * schedule AC if more TIDs need processing
+	 */
+	if (!list_empty(&ac->tid_q)) {
+		/*
+		 * add dest ac to txq if not already added
+		 */
+		if (!ac->sched) {
+			ac->sched = true;
+			list_add_tail(&ac->list, &txq->axq_acq);
+		}
+	}
+}
+
+/* Initialize per-node transmit state */
+
+void ath_tx_node_init(struct ath_softc *sc, struct ath_node *an)
+{
+	if (sc->sc_txaggr) {
+		struct ath_atx_tid *tid;
+		struct ath_atx_ac *ac;
+		int tidno, acno;
+
+		sc->sc_ht_info.maxampdu = ATH_AMPDU_LIMIT_DEFAULT;
+
+		/*
+		 * Init per tid tx state
+		 */
+		for (tidno = 0, tid = &an->an_aggr.tx.tid[tidno];
+				tidno < WME_NUM_TID;
+				tidno++, tid++) {
+			tid->an        = an;
+			tid->tidno     = tidno;
+			tid->seq_start = tid->seq_next = 0;
+			tid->baw_size  = WME_MAX_BA;
+			tid->baw_head  = tid->baw_tail = 0;
+			tid->sched     = false;
+			tid->paused = false;
+			tid->cleanup_inprogress = false;
+			INIT_LIST_HEAD(&tid->buf_q);
+
+			acno = TID_TO_WME_AC(tidno);
+			tid->ac = &an->an_aggr.tx.ac[acno];
+
+			/* ADDBA state */
+			tid->addba_exchangecomplete     = 0;
+			tid->addba_exchangeinprogress   = 0;
+			tid->addba_exchangeattempts     = 0;
+		}
+
+		/*
+		 * Init per ac tx state
+		 */
+		for (acno = 0, ac = &an->an_aggr.tx.ac[acno];
+				acno < WME_NUM_AC; acno++, ac++) {
+			ac->sched    = false;
+			INIT_LIST_HEAD(&ac->tid_q);
+
+			switch (acno) {
+			case WME_AC_BE:
+				ac->qnum = ath_tx_get_qnum(sc,
+					ATH9K_TX_QUEUE_DATA, ATH9K_WME_AC_BE);
+				break;
+			case WME_AC_BK:
+				ac->qnum = ath_tx_get_qnum(sc,
+					ATH9K_TX_QUEUE_DATA, ATH9K_WME_AC_BK);
+				break;
+			case WME_AC_VI:
+				ac->qnum = ath_tx_get_qnum(sc,
+					ATH9K_TX_QUEUE_DATA, ATH9K_WME_AC_VI);
+				break;
+			case WME_AC_VO:
+				ac->qnum = ath_tx_get_qnum(sc,
+					ATH9K_TX_QUEUE_DATA, ATH9K_WME_AC_VO);
+				break;
+			}
+		}
+	}
+}
+
+/* Cleanupthe pending buffers for the node. */
+
+void ath_tx_node_cleanup(struct ath_softc *sc,
+	struct ath_node *an, bool bh_flag)
+{
+	int i;
+	struct ath_atx_ac *ac, *ac_tmp;
+	struct ath_atx_tid *tid, *tid_tmp;
+	struct ath_txq *txq;
+	for (i = 0; i < ATH9K_NUM_TX_QUEUES; i++) {
+		if (ATH_TXQ_SETUP(sc, i)) {
+			txq = &sc->sc_txq[i];
+
+			if (likely(bh_flag))
+				spin_lock_bh(&txq->axq_lock);
+			else
+				spin_lock(&txq->axq_lock);
+
+			list_for_each_entry_safe(ac,
+					ac_tmp, &txq->axq_acq, list) {
+				tid = list_first_entry(&ac->tid_q,
+						struct ath_atx_tid, list);
+				if (tid && tid->an != an)
+					continue;
+				list_del(&ac->list);
+				ac->sched = false;
+
+				list_for_each_entry_safe(tid,
+						tid_tmp, &ac->tid_q, list) {
+					list_del(&tid->list);
+					tid->sched = false;
+					ath_tid_drain(sc, txq, tid, bh_flag);
+					tid->addba_exchangecomplete = 0;
+					tid->addba_exchangeattempts = 0;
+					tid->cleanup_inprogress = false;
+				}
+			}
+
+			if (likely(bh_flag))
+				spin_unlock_bh(&txq->axq_lock);
+			else
+				spin_unlock(&txq->axq_lock);
+		}
+	}
+}
+
+/* Cleanup per node transmit state */
+
+void ath_tx_node_free(struct ath_softc *sc, struct ath_node *an)
+{
+	if (sc->sc_txaggr) {
+		struct ath_atx_tid *tid;
+		int tidno, i;
+
+		/* Init per tid rx state */
+		for (tidno = 0, tid = &an->an_aggr.tx.tid[tidno];
+			tidno < WME_NUM_TID;
+		     tidno++, tid++) {
+
+			for (i = 0; i < ATH_TID_MAX_BUFS; i++)
+				ASSERT(tid->tx_buf[i] == NULL);
+		}
+	}
+}
diff --git a/drivers/net/wireless/atmel.c b/drivers/net/wireless/atmel.c
index bd35bb0a1480..bd65c485098c 100644
--- a/drivers/net/wireless/atmel.c
+++ b/drivers/net/wireless/atmel.c
@@ -1304,7 +1304,7 @@ EXPORT_SYMBOL(atmel_open);
 int atmel_open(struct net_device *dev)
 {
 	struct atmel_private *priv = netdev_priv(dev);
-	int i, channel;
+	int i, channel, err;
 
 	/* any scheduled timer is no longer needed and might screw things up.. */
 	del_timer_sync(&priv->management_timer);
@@ -1328,8 +1328,9 @@ int atmel_open(struct net_device *dev)
 	priv->site_survey_state = SITE_SURVEY_IDLE;
 	priv->station_is_associated = 0;
 
-	if (!reset_atmel_card(dev))
-		return -EAGAIN;
+	err = reset_atmel_card(dev);
+	if (err)
+		return err;
 
 	if (priv->config_reg_domain) {
 		priv->reg_domain = priv->config_reg_domain;
@@ -3061,12 +3062,20 @@ static void authenticate(struct atmel_private *priv, u16 frame_len)
 	}
 
 	if (status == WLAN_STATUS_NOT_SUPPORTED_AUTH_ALG) {
-		/* Do opensystem first, then try sharedkey */
+		/* Flip back and forth between WEP auth modes until the max
+		 * authentication tries has been exceeded.
+		 */
 		if (system == WLAN_AUTH_OPEN) {
 			priv->CurrentAuthentTransactionSeqNum = 0x001;
 			priv->exclude_unencrypted = 1;
 			send_authentication_request(priv, WLAN_AUTH_SHARED_KEY, NULL, 0);
 			return;
+		} else if (   system == WLAN_AUTH_SHARED_KEY
+		           && priv->wep_is_on) {
+			priv->CurrentAuthentTransactionSeqNum = 0x001;
+			priv->exclude_unencrypted = 0;
+			send_authentication_request(priv, WLAN_AUTH_OPEN, NULL, 0);
+			return;
 		} else if (priv->connect_to_any_BSS) {
 			int bss_index;
 
@@ -3580,12 +3589,12 @@ static int atmel_wakeup_firmware(struct atmel_private *priv)
 
 	if (i == 0) {
 		printk(KERN_ALERT "%s: MAC failed to boot.\n", priv->dev->name);
-		return 0;
+		return -EIO;
 	}
 
 	if ((priv->host_info_base = atmel_read16(priv->dev, MR2)) == 0xffff) {
 		printk(KERN_ALERT "%s: card missing.\n", priv->dev->name);
-		return 0;
+		return -ENODEV;
 	}
 
 	/* now check for completion of MAC initialization through
@@ -3609,19 +3618,19 @@ static int atmel_wakeup_firmware(struct atmel_private *priv)
 	if (i == 0) {
 		printk(KERN_ALERT "%s: MAC failed to initialise.\n",
 				priv->dev->name);
-		return 0;
+		return -EIO;
 	}
 
 	/* Check for MAC_INIT_OK only on the register that the MAC_INIT_OK was set */
 	if ((mr3 & MAC_INIT_COMPLETE) &&
 	    !(atmel_read16(priv->dev, MR3) & MAC_INIT_OK)) {
 		printk(KERN_ALERT "%s: MAC failed MR3 self-test.\n", priv->dev->name);
-		return 0;
+		return -EIO;
 	}
 	if ((mr1 & MAC_INIT_COMPLETE) &&
 	    !(atmel_read16(priv->dev, MR1) & MAC_INIT_OK)) {
 		printk(KERN_ALERT "%s: MAC failed MR1 self-test.\n", priv->dev->name);
-		return 0;
+		return -EIO;
 	}
 
 	atmel_copy_to_host(priv->dev, (unsigned char *)iface,
@@ -3642,7 +3651,7 @@ static int atmel_wakeup_firmware(struct atmel_private *priv)
 	iface->func_ctrl = le16_to_cpu(iface->func_ctrl);
 	iface->mac_status = le16_to_cpu(iface->mac_status);
 
-	return 1;
+	return 0;
 }
 
 /* determine type of memory and MAC address */
@@ -3693,7 +3702,7 @@ static int probe_atmel_card(struct net_device *dev)
 		/* Standard firmware in flash, boot it up and ask
 		   for the Mac Address */
 		priv->card_type = CARD_TYPE_SPI_FLASH;
-		if (atmel_wakeup_firmware(priv)) {
+		if (atmel_wakeup_firmware(priv) == 0) {
 			atmel_get_mib(priv, Mac_Address_Mib_Type, 0, dev->dev_addr, 6);
 
 			/* got address, now squash it again until the network
@@ -3835,6 +3844,7 @@ static int reset_atmel_card(struct net_device *dev)
 	struct atmel_private *priv = netdev_priv(dev);
 	u8 configuration;
 	int old_state = priv->station_state;
+	int err = 0;
 
 	/* data to add to the firmware names, in priority order
 	   this implemenents firmware versioning */
@@ -3868,11 +3878,12 @@ static int reset_atmel_card(struct net_device *dev)
 					       dev->name);
 					strcpy(priv->firmware_id, "atmel_at76c502.bin");
 				}
-				if (request_firmware(&fw_entry, priv->firmware_id, priv->sys_dev) != 0) {
+				err = request_firmware(&fw_entry, priv->firmware_id, priv->sys_dev);
+				if (err != 0) {
 					printk(KERN_ALERT
 					       "%s: firmware %s is missing, cannot continue.\n",
 					       dev->name, priv->firmware_id);
-					return 0;
+					return err;
 				}
 			} else {
 				int fw_index = 0;
@@ -3901,7 +3912,7 @@ static int reset_atmel_card(struct net_device *dev)
 					       "%s: firmware %s is missing, cannot start.\n",
 					       dev->name, priv->firmware_id);
 					priv->firmware_id[0] = '\0';
-					return 0;
+					return -ENOENT;
 				}
 			}
 
@@ -3926,8 +3937,9 @@ static int reset_atmel_card(struct net_device *dev)
 			release_firmware(fw_entry);
 	}
 
-	if (!atmel_wakeup_firmware(priv))
-		return 0;
+	err = atmel_wakeup_firmware(priv);
+	if (err != 0)
+		return err;
 
 	/* Check the version and set the correct flag for wpa stuff,
 	   old and new firmware is incompatible.
@@ -3968,10 +3980,9 @@ static int reset_atmel_card(struct net_device *dev)
 	if (!priv->radio_on_broken) {
 		if (atmel_send_command_wait(priv, CMD_EnableRadio, NULL, 0) ==
 		    CMD_STATUS_REJECTED_RADIO_OFF) {
-			printk(KERN_INFO
-			       "%s: cannot turn the radio on. (Hey radio, you're beautiful!)\n",
+			printk(KERN_INFO "%s: cannot turn the radio on.\n",
 			       dev->name);
-                        return 0;
+                        return -EIO;
 		}
 	}
 
@@ -4006,7 +4017,7 @@ static int reset_atmel_card(struct net_device *dev)
 		wireless_send_event(priv->dev, SIOCGIWAP, &wrqu, NULL);
 	}
 
-	return 1;
+	return 0;
 }
 
 static void atmel_send_command(struct atmel_private *priv, int command,
diff --git a/drivers/net/wireless/b43/main.c b/drivers/net/wireless/b43/main.c
index e78319aa47c1..7205a936ec74 100644
--- a/drivers/net/wireless/b43/main.c
+++ b/drivers/net/wireless/b43/main.c
@@ -33,7 +33,6 @@
 #include <linux/moduleparam.h>
 #include <linux/if_arp.h>
 #include <linux/etherdevice.h>
-#include <linux/version.h>
 #include <linux/firmware.h>
 #include <linux/wireless.h>
 #include <linux/workqueue.h>
@@ -4615,7 +4614,9 @@ static void b43_sprom_fixup(struct ssb_bus *bus)
 	if (bus->bustype == SSB_BUSTYPE_PCI) {
 		pdev = bus->host_pci;
 		if (IS_PDEV(pdev, BROADCOM, 0x4318, ASUSTEK, 0x100F) ||
+		    IS_PDEV(pdev, BROADCOM, 0x4320,    DELL, 0x0003) ||
 		    IS_PDEV(pdev, BROADCOM, 0x4320, LINKSYS, 0x0015) ||
+		    IS_PDEV(pdev, BROADCOM, 0x4320, LINKSYS, 0x0014) ||
 		    IS_PDEV(pdev, BROADCOM, 0x4320, LINKSYS, 0x0013))
 			bus->sprom.boardflags_lo &= ~B43_BFL_BTCOEXIST;
 	}
@@ -4645,8 +4646,7 @@ static int b43_wireless_init(struct ssb_device *dev)
 	}
 
 	/* fill hw info */
-	hw->flags = IEEE80211_HW_HOST_GEN_BEACON_TEMPLATE |
-		    IEEE80211_HW_RX_INCLUDES_FCS |
+	hw->flags = IEEE80211_HW_RX_INCLUDES_FCS |
 		    IEEE80211_HW_SIGNAL_DBM |
 		    IEEE80211_HW_NOISE_DBM;
 
diff --git a/drivers/net/wireless/b43/xmit.c b/drivers/net/wireless/b43/xmit.c
index 8d54502222a6..9dda8169f7cc 100644
--- a/drivers/net/wireless/b43/xmit.c
+++ b/drivers/net/wireless/b43/xmit.c
@@ -192,7 +192,7 @@ int b43_generate_txhdr(struct b43_wldev *dev,
 	const struct b43_phy *phy = &dev->phy;
 	const struct ieee80211_hdr *wlhdr =
 	    (const struct ieee80211_hdr *)fragment_data;
-	int use_encryption = (!(info->flags & IEEE80211_TX_CTL_DO_NOT_ENCRYPT));
+	int use_encryption = !!info->control.hw_key;
 	__le16 fctl = wlhdr->frame_control;
 	struct ieee80211_rate *fbrate;
 	u8 rate, rate_fb;
diff --git a/drivers/net/wireless/b43legacy/main.c b/drivers/net/wireless/b43legacy/main.c
index a1b8bf3ee732..1cb77db5c292 100644
--- a/drivers/net/wireless/b43legacy/main.c
+++ b/drivers/net/wireless/b43legacy/main.c
@@ -34,7 +34,6 @@
 #include <linux/moduleparam.h>
 #include <linux/if_arp.h>
 #include <linux/etherdevice.h>
-#include <linux/version.h>
 #include <linux/firmware.h>
 #include <linux/wireless.h>
 #include <linux/workqueue.h>
@@ -3702,8 +3701,7 @@ static int b43legacy_wireless_init(struct ssb_device *dev)
 	}
 
 	/* fill hw info */
-	hw->flags = IEEE80211_HW_HOST_GEN_BEACON_TEMPLATE |
-		    IEEE80211_HW_RX_INCLUDES_FCS |
+	hw->flags = IEEE80211_HW_RX_INCLUDES_FCS |
 		    IEEE80211_HW_SIGNAL_DBM |
 		    IEEE80211_HW_NOISE_DBM;
 	hw->queues = 1; /* FIXME: hardware has more queues */
@@ -3846,10 +3844,10 @@ static int b43legacy_resume(struct ssb_device *dev)
 			goto out;
 		}
 	}
-	mutex_unlock(&wl->mutex);
 
 	b43legacydbg(wl, "Device resumed.\n");
 out:
+	mutex_unlock(&wl->mutex);
 	return err;
 }
 
diff --git a/drivers/net/wireless/b43legacy/xmit.c b/drivers/net/wireless/b43legacy/xmit.c
index e969ed8d412d..68e1f8c78727 100644
--- a/drivers/net/wireless/b43legacy/xmit.c
+++ b/drivers/net/wireless/b43legacy/xmit.c
@@ -192,7 +192,7 @@ static int generate_txhdr_fw3(struct b43legacy_wldev *dev,
 			       u16 cookie)
 {
 	const struct ieee80211_hdr *wlhdr;
-	int use_encryption = (!(info->flags & IEEE80211_TX_CTL_DO_NOT_ENCRYPT));
+	int use_encryption = !!info->control.hw_key;
 	u16 fctl;
 	u8 rate;
 	struct ieee80211_rate *rate_fb;
diff --git a/drivers/net/wireless/ipw2100.c b/drivers/net/wireless/ipw2100.c
index 5bf9e00b070c..19a401c4a0dc 100644
--- a/drivers/net/wireless/ipw2100.c
+++ b/drivers/net/wireless/ipw2100.c
@@ -157,7 +157,6 @@ that only one external action is invoked at a time.
 #include <linux/stringify.h>
 #include <linux/tcp.h>
 #include <linux/types.h>
-#include <linux/version.h>
 #include <linux/time.h>
 #include <linux/firmware.h>
 #include <linux/acpi.h>
@@ -6442,6 +6441,7 @@ static int ipw2100_resume(struct pci_dev *pci_dev)
 	if (err) {
 		printk(KERN_ERR "%s: pci_enable_device failed on resume\n",
 		       dev->name);
+		mutex_unlock(&priv->action_mutex);
 		return err;
 	}
 	pci_restore_state(pci_dev);
@@ -7146,7 +7146,7 @@ static int ipw2100_wx_get_rate(struct net_device *dev,
 	err = ipw2100_get_ordinal(priv, IPW_ORD_CURRENT_TX_RATE, &val, &len);
 	if (err) {
 		IPW_DEBUG_WX("failed querying ordinals.\n");
-		return err;
+		goto done;
 	}
 
 	switch (val & TX_RATE_MASK) {
diff --git a/drivers/net/wireless/ipw2200.c b/drivers/net/wireless/ipw2200.c
index 1acfbcd3703c..dcce3542d5a7 100644
--- a/drivers/net/wireless/ipw2200.c
+++ b/drivers/net/wireless/ipw2200.c
@@ -31,7 +31,6 @@
 ******************************************************************************/
 
 #include "ipw2200.h"
-#include <linux/version.h>
 
 
 #ifndef KBUILD_EXTMOD
@@ -305,9 +304,10 @@ static inline void ipw_write_reg32(struct ipw_priv *a, u32 b, u32 c)
 #define _ipw_write8(ipw, ofs, val) writeb((val), (ipw)->hw_base + (ofs))
 
 /* 8-bit direct write (for low 4K of SRAM/regs), with debug wrapper */
-#define ipw_write8(ipw, ofs, val) \
+#define ipw_write8(ipw, ofs, val) do { \
  IPW_DEBUG_IO("%s %d: write_direct8(0x%08X, 0x%08X)\n", __FILE__, __LINE__, (u32)(ofs), (u32)(val)); \
- _ipw_write8(ipw, ofs, val)
+ _ipw_write8(ipw, ofs, val); \
+ } while (0)
 
 /* 16-bit direct write (low 4K) */
 #define _ipw_write16(ipw, ofs, val) writew((val), (ipw)->hw_base + (ofs))
@@ -11946,7 +11946,7 @@ module_param(auto_create, int, 0444);
 MODULE_PARM_DESC(auto_create, "auto create adhoc network (default on)");
 
 module_param(led, int, 0444);
-MODULE_PARM_DESC(led, "enable led control on some systems (default 0 off)\n");
+MODULE_PARM_DESC(led, "enable led control on some systems (default 0 off)");
 
 module_param(debug, int, 0444);
 MODULE_PARM_DESC(debug, "debug output mask");
diff --git a/drivers/net/wireless/iwlwifi/Kconfig b/drivers/net/wireless/iwlwifi/Kconfig
index 82b66a3d3a5d..b0ac0ce3fb9f 100644
--- a/drivers/net/wireless/iwlwifi/Kconfig
+++ b/drivers/net/wireless/iwlwifi/Kconfig
@@ -14,18 +14,49 @@ config IWLWIFI_LEDS
 	default n
 
 config IWLWIFI_RFKILL
-	boolean "IWLWIFI RF kill support"
+	boolean "Iwlwifi RF kill support"
 	depends on IWLCORE
 
-config IWL4965
-	tristate "Intel Wireless WiFi 4965AGN"
+config IWLWIFI_DEBUG
+	bool "Enable full debugging output in iwlagn driver"
+	depends on IWLCORE
+	---help---
+	  This option will enable debug tracing output for the iwlwifi drivers
+
+	  This will result in the kernel module being ~100k larger.  You can
+	  control which debug output is sent to the kernel log by setting the
+	  value in
+
+		/sys/class/net/wlan0/device/debug_level
+
+	  This entry will only exist if this option is enabled.
+
+	  To set a value, simply echo an 8-byte hex value to the same file:
+
+		  % echo 0x43fff > /sys/class/net/wlan0/device/debug_level
+
+	  You can find the list of debug mask values in:
+		  drivers/net/wireless/iwlwifi/iwl-debug.h
+
+	  If this is your first time using this driver, you should say Y here
+	  as the debug information can assist others in helping you resolve
+	  any problems you may encounter.
+
+config IWLWIFI_DEBUGFS
+        bool "Iwlwifi debugfs support"
+        depends on IWLCORE && IWLWIFI_DEBUG && MAC80211_DEBUGFS
+        ---help---
+	  Enable creation of debugfs files for the iwlwifi drivers.
+
+config IWLAGN
+	tristate "Intel Wireless WiFi Next Gen AGN"
 	depends on PCI && MAC80211 && WLAN_80211 && EXPERIMENTAL
 	select FW_LOADER
 	select IWLCORE
 	---help---
 	  Select to build the driver supporting the:
 
-	  Intel Wireless WiFi Link 4965AGN
+	  Intel Wireless WiFi Link Next-Gen AGN
 
 	  This driver uses the kernel's mac80211 subsystem.
 
@@ -42,60 +73,33 @@ config IWL4965
 	  If you want to compile the driver as a module ( = code which can be
 	  inserted in and removed from the running kernel whenever you want),
 	  say M here and read <file:Documentation/kbuild/modules.txt>.  The
-	  module will be called iwl4965.ko.
-
-config IWL4965_LEDS
-	bool "Enable LEDS features in iwl4965 driver"
-	depends on IWL4965
-	select IWLWIFI_LEDS
-	---help---
-	  This option enables LEDS for the iwlwifi drivers
+	  module will be called iwlagn.ko.
 
-
-config IWL4965_SPECTRUM_MEASUREMENT
-	bool "Enable Spectrum Measurement in iwl4965 driver"
-	depends on IWL4965
+config IWLAGN_SPECTRUM_MEASUREMENT
+	bool "Enable Spectrum Measurement in iwlagn driver"
+	depends on IWLAGN
 	---help---
-	  This option will enable spectrum measurement for the iwl4965 driver.
+	  This option will enable spectrum measurement for the iwlagn driver.
 
-config IWLWIFI_DEBUG
-	bool "Enable full debugging output in iwl4965 driver"
-	depends on IWL4965
+config IWLAGN_LEDS
+	bool "Enable LEDS features in iwlagn driver"
+	depends on IWLAGN
+	select IWLWIFI_LEDS
 	---help---
-	  This option will enable debug tracing output for the iwl4965
-	  driver.
-
-	  This will result in the kernel module being ~100k larger.  You can
-	  control which debug output is sent to the kernel log by setting the
-	  value in
-
-		/sys/class/net/wlan0/device/debug_level
-
-	  This entry will only exist if this option is enabled.
-
-	  To set a value, simply echo an 8-byte hex value to the same file:
-
-		  % echo 0x43fff > /sys/class/net/wlan0/device/debug_level
+	  This option enables LEDS for the iwlagn drivers
 
-	  You can find the list of debug mask values in:
-		  drivers/net/wireless/iwlwifi/iwl-4965-debug.h
 
-	  If this is your first time using this driver, you should say Y here
-	  as the debug information can assist others in helping you resolve
-	  any problems you may encounter.
+config IWL4965
+	bool "Intel Wireless WiFi 4965AGN"
+	depends on IWLAGN
+	---help---
+	  This option enables support for Intel Wireless WiFi Link 4965AGN
 
 config IWL5000
 	bool "Intel Wireless WiFi 5000AGN"
-	depends on IWL4965
+	depends on IWLAGN
 	---help---
 	  This option enables support for Intel Wireless WiFi Link 5000AGN Family
-	  Dependency on 4965 is temporary
-
-config IWLWIFI_DEBUGFS
-        bool "Iwlwifi debugfs support"
-        depends on IWLCORE && IWLWIFI_DEBUG && MAC80211_DEBUGFS
-        ---help---
-	  Enable creation of debugfs files for the iwlwifi drivers.
 
 config IWL3945
 	tristate "Intel PRO/Wireless 3945ABG/BG Network Connection"
diff --git a/drivers/net/wireless/iwlwifi/Makefile b/drivers/net/wireless/iwlwifi/Makefile
index 1f52b92f08b5..47aa28f6a513 100644
--- a/drivers/net/wireless/iwlwifi/Makefile
+++ b/drivers/net/wireless/iwlwifi/Makefile
@@ -6,15 +6,14 @@ iwlcore-$(CONFIG_IWLWIFI_DEBUGFS) += iwl-debugfs.o
 iwlcore-$(CONFIG_IWLWIFI_LEDS) += iwl-led.o
 iwlcore-$(CONFIG_IWLWIFI_RFKILL) += iwl-rfkill.o
 
+obj-$(CONFIG_IWLAGN)	+= iwlagn.o
+iwlagn-objs		:= iwl-agn.o iwl-agn-rs.o
+
+iwlagn-$(CONFIG_IWL4965) += iwl-4965.o
+iwlagn-$(CONFIG_IWL5000) += iwl-5000.o
+
 obj-$(CONFIG_IWL3945)	+= iwl3945.o
 iwl3945-objs		:= iwl3945-base.o iwl-3945.o iwl-3945-rs.o
 iwl3945-$(CONFIG_IWL3945_LEDS) += iwl-3945-led.o
 
-obj-$(CONFIG_IWL4965)	+= iwl4965.o
-iwl4965-objs		:= iwl4965-base.o iwl-4965.o iwl-4965-rs.o
-
-ifeq ($(CONFIG_IWL5000),y)
-	iwl4965-objs += iwl-5000.o
-endif
-
 
diff --git a/drivers/net/wireless/iwlwifi/iwl-3945-led.c b/drivers/net/wireless/iwlwifi/iwl-3945-led.c
index 6be1fe13fa57..705c65bed9fd 100644
--- a/drivers/net/wireless/iwlwifi/iwl-3945-led.c
+++ b/drivers/net/wireless/iwlwifi/iwl-3945-led.c
@@ -27,7 +27,6 @@
 
 #include <linux/kernel.h>
 #include <linux/module.h>
-#include <linux/version.h>
 #include <linux/init.h>
 #include <linux/pci.h>
 #include <linux/dma-mapping.h>
@@ -206,12 +205,12 @@ static void iwl3945_led_brightness_set(struct led_classdev *led_cdev,
 static int iwl3945_led_register_led(struct iwl3945_priv *priv,
 				   struct iwl3945_led *led,
 				   enum led_type type, u8 set_led,
-				   const char *name, char *trigger)
+				   char *trigger)
 {
 	struct device *device = wiphy_dev(priv->hw->wiphy);
 	int ret;
 
-	led->led_dev.name = name;
+	led->led_dev.name = led->name;
 	led->led_dev.brightness_set = iwl3945_led_brightness_set;
 	led->led_dev.default_trigger = trigger;
 
@@ -308,7 +307,6 @@ void iwl3945_led_background(struct iwl3945_priv *priv)
 int iwl3945_led_register(struct iwl3945_priv *priv)
 {
 	char *trigger;
-	char name[32];
 	int ret;
 
 	priv->last_blink_rate = 0;
@@ -318,7 +316,8 @@ int iwl3945_led_register(struct iwl3945_priv *priv)
 	priv->allow_blinking = 0;
 
 	trigger = ieee80211_get_radio_led_name(priv->hw);
-	snprintf(name, sizeof(name), "iwl-%s:radio",
+	snprintf(priv->led[IWL_LED_TRG_RADIO].name,
+		 sizeof(priv->led[IWL_LED_TRG_RADIO].name), "iwl-%s:radio",
 		 wiphy_name(priv->hw->wiphy));
 
 	priv->led[IWL_LED_TRG_RADIO].led_on = iwl3945_led_on;
@@ -327,19 +326,20 @@ int iwl3945_led_register(struct iwl3945_priv *priv)
 
 	ret = iwl3945_led_register_led(priv,
 				   &priv->led[IWL_LED_TRG_RADIO],
-				   IWL_LED_TRG_RADIO, 1,
-				   name, trigger);
+				   IWL_LED_TRG_RADIO, 1, trigger);
+
 	if (ret)
 		goto exit_fail;
 
 	trigger = ieee80211_get_assoc_led_name(priv->hw);
-	snprintf(name, sizeof(name), "iwl-%s:assoc",
+	snprintf(priv->led[IWL_LED_TRG_ASSOC].name,
+		 sizeof(priv->led[IWL_LED_TRG_ASSOC].name), "iwl-%s:assoc",
 		 wiphy_name(priv->hw->wiphy));
 
 	ret = iwl3945_led_register_led(priv,
 				   &priv->led[IWL_LED_TRG_ASSOC],
-				   IWL_LED_TRG_ASSOC, 0,
-				   name, trigger);
+				   IWL_LED_TRG_ASSOC, 0, trigger);
+
 	/* for assoc always turn led on */
 	priv->led[IWL_LED_TRG_ASSOC].led_on = iwl3945_led_on;
 	priv->led[IWL_LED_TRG_ASSOC].led_off = iwl3945_led_on;
@@ -349,14 +349,13 @@ int iwl3945_led_register(struct iwl3945_priv *priv)
 		goto exit_fail;
 
 	trigger = ieee80211_get_rx_led_name(priv->hw);
-	snprintf(name, sizeof(name), "iwl-%s:RX",
+	snprintf(priv->led[IWL_LED_TRG_RX].name,
+		 sizeof(priv->led[IWL_LED_TRG_RX].name), "iwl-%s:RX",
 		 wiphy_name(priv->hw->wiphy));
 
-
 	ret = iwl3945_led_register_led(priv,
 				   &priv->led[IWL_LED_TRG_RX],
-				   IWL_LED_TRG_RX, 0,
-				   name, trigger);
+				   IWL_LED_TRG_RX, 0, trigger);
 
 	priv->led[IWL_LED_TRG_RX].led_on = iwl3945_led_associated;
 	priv->led[IWL_LED_TRG_RX].led_off = iwl3945_led_associated;
@@ -366,13 +365,14 @@ int iwl3945_led_register(struct iwl3945_priv *priv)
 		goto exit_fail;
 
 	trigger = ieee80211_get_tx_led_name(priv->hw);
-	snprintf(name, sizeof(name), "iwl-%s:TX",
+	snprintf(priv->led[IWL_LED_TRG_TX].name,
+		 sizeof(priv->led[IWL_LED_TRG_TX].name), "iwl-%s:TX",
 		 wiphy_name(priv->hw->wiphy));
 
 	ret = iwl3945_led_register_led(priv,
 				   &priv->led[IWL_LED_TRG_TX],
-				   IWL_LED_TRG_TX, 0,
-				   name, trigger);
+				   IWL_LED_TRG_TX, 0, trigger);
+
 	priv->led[IWL_LED_TRG_TX].led_on = iwl3945_led_associated;
 	priv->led[IWL_LED_TRG_TX].led_off = iwl3945_led_associated;
 	priv->led[IWL_LED_TRG_TX].led_pattern = iwl3945_led_pattern;
diff --git a/drivers/net/wireless/iwlwifi/iwl-3945-led.h b/drivers/net/wireless/iwlwifi/iwl-3945-led.h
index 47b7e0bac802..2fbd126c1347 100644
--- a/drivers/net/wireless/iwlwifi/iwl-3945-led.h
+++ b/drivers/net/wireless/iwlwifi/iwl-3945-led.h
@@ -50,6 +50,7 @@ enum led_type {
 struct iwl3945_led {
 	struct iwl3945_priv *priv;
 	struct led_classdev led_dev;
+	char name[32];
 
 	int (*led_on) (struct iwl3945_priv *priv, int led_id);
 	int (*led_off) (struct iwl3945_priv *priv, int led_id);
diff --git a/drivers/net/wireless/iwlwifi/iwl-3945.c b/drivers/net/wireless/iwlwifi/iwl-3945.c
index c2a76785b665..3f51f3635344 100644
--- a/drivers/net/wireless/iwlwifi/iwl-3945.c
+++ b/drivers/net/wireless/iwlwifi/iwl-3945.c
@@ -26,7 +26,6 @@
 
 #include <linux/kernel.h>
 #include <linux/module.h>
-#include <linux/version.h>
 #include <linux/init.h>
 #include <linux/pci.h>
 #include <linux/dma-mapping.h>
@@ -630,7 +629,9 @@ static void iwl3945_pass_packet_to_mac80211(struct iwl3945_priv *priv,
 				   struct ieee80211_rx_status *stats)
 {
 	struct iwl3945_rx_packet *pkt = (struct iwl3945_rx_packet *)rxb->skb->data;
+#ifdef CONFIG_IWL3945_LEDS
 	struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)IWL_RX_DATA(pkt);
+#endif
 	struct iwl3945_rx_frame_hdr *rx_hdr = IWL_RX_HDR(pkt);
 	struct iwl3945_rx_frame_end *rx_end = IWL_RX_END(pkt);
 	short len = le16_to_cpu(rx_hdr->len);
@@ -708,10 +709,7 @@ static void iwl3945_rx_reply_rx(struct iwl3945_priv *priv,
 		return;
 	}
 
-	if (priv->iw_mode == IEEE80211_IF_TYPE_MNTR) {
-		iwl3945_pass_packet_to_mac80211(priv, rxb, &rx_status);
-		return;
-	}
+
 
 	/* Convert 3945's rssi indicator to dBm */
 	rx_status.signal = rx_stats->rssi - IWL_RSSI_OFFSET;
@@ -773,6 +771,11 @@ static void iwl3945_rx_reply_rx(struct iwl3945_priv *priv,
 		priv->last_rx_noise = rx_status.noise;
 	}
 
+	if (priv->iw_mode == IEEE80211_IF_TYPE_MNTR) {
+		iwl3945_pass_packet_to_mac80211(priv, rxb, &rx_status);
+		return;
+	}
+
 	switch (le16_to_cpu(header->frame_control) & IEEE80211_FCTL_FTYPE) {
 	case IEEE80211_FTYPE_MGMT:
 		switch (le16_to_cpu(header->frame_control) &
@@ -791,8 +794,7 @@ static void iwl3945_rx_reply_rx(struct iwl3945_priv *priv,
 					struct ieee80211_mgmt *mgmt =
 					    (struct ieee80211_mgmt *)header;
 					__le32 *pos;
-					pos =
-					    (__le32 *) & mgmt->u.beacon.
+					pos = (__le32 *)&mgmt->u.beacon.
 					    timestamp;
 					priv->timestamp0 = le32_to_cpu(pos[0]);
 					priv->timestamp1 = le32_to_cpu(pos[1]);
@@ -1505,7 +1507,7 @@ static int iwl3945_hw_reg_adjust_power_by_temp(int new_reading, int old_reading)
  */
 static inline int iwl3945_hw_reg_temp_out_of_range(int temperature)
 {
-	return (((temperature < -260) || (temperature > 25)) ? 1 : 0);
+	return ((temperature < -260) || (temperature > 25)) ? 1 : 0;
 }
 
 int iwl3945_hw_get_temperature(struct iwl3945_priv *priv)
@@ -2626,7 +2628,7 @@ unsigned int iwl3945_hw_get_beacon_cmd(struct iwl3945_priv *priv,
 	tx_beacon_cmd->tx.supp_rates[1] =
 		(IWL_CCK_BASIC_RATES_MASK & 0xF);
 
-	return (sizeof(struct iwl3945_tx_beacon_cmd) + frame_size);
+	return sizeof(struct iwl3945_tx_beacon_cmd) + frame_size;
 }
 
 void iwl3945_hw_rx_handler_setup(struct iwl3945_priv *priv)
diff --git a/drivers/net/wireless/iwlwifi/iwl-4965-rs.c b/drivers/net/wireless/iwlwifi/iwl-4965-rs.c
deleted file mode 100644
index 3ccb84aa5dbc..000000000000
--- a/drivers/net/wireless/iwlwifi/iwl-4965-rs.c
+++ /dev/null
@@ -1,2713 +0,0 @@
-/******************************************************************************
- *
- * Copyright(c) 2005 - 2008 Intel Corporation. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of version 2 of the GNU General Public License as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * this program; if not, write to the Free Software Foundation, Inc.,
- * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
- *
- * The full GNU General Public License is included in this distribution in the
- * file called LICENSE.
- *
- * Contact Information:
- * James P. Ketrenos <ipw2100-admin@linux.intel.com>
- * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
- *
- *****************************************************************************/
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/skbuff.h>
-#include <linux/wireless.h>
-#include <net/mac80211.h>
-
-#include <linux/netdevice.h>
-#include <linux/etherdevice.h>
-#include <linux/delay.h>
-
-#include <linux/workqueue.h>
-
-#include "../net/mac80211/rate.h"
-
-#include "iwl-dev.h"
-#include "iwl-sta.h"
-#include "iwl-core.h"
-#include "iwl-helpers.h"
-
-#define RS_NAME "iwl-4965-rs"
-
-#define NUM_TRY_BEFORE_ANT_TOGGLE 1
-#define IWL_NUMBER_TRY      1
-#define IWL_HT_NUMBER_TRY   3
-
-#define IWL_RATE_MAX_WINDOW		62	/* # tx in history window */
-#define IWL_RATE_MIN_FAILURE_TH		6	/* min failures to calc tpt */
-#define IWL_RATE_MIN_SUCCESS_TH		8	/* min successes to calc tpt */
-
-/* max time to accum history 2 seconds */
-#define IWL_RATE_SCALE_FLUSH_INTVL   (2*HZ)
-
-static u8 rs_ht_to_legacy[] = {
-	IWL_RATE_6M_INDEX, IWL_RATE_6M_INDEX,
-	IWL_RATE_6M_INDEX, IWL_RATE_6M_INDEX,
-	IWL_RATE_6M_INDEX,
-	IWL_RATE_6M_INDEX, IWL_RATE_9M_INDEX,
-	IWL_RATE_12M_INDEX, IWL_RATE_18M_INDEX,
-	IWL_RATE_24M_INDEX, IWL_RATE_36M_INDEX,
-	IWL_RATE_48M_INDEX, IWL_RATE_54M_INDEX
-};
-
-static const u8 ant_toggle_lookup[] = {
-	/*ANT_NONE -> */ ANT_NONE,
-	/*ANT_A    -> */ ANT_B,
-	/*ANT_B    -> */ ANT_C,
-	/*ANT_AB   -> */ ANT_BC,
-	/*ANT_C    -> */ ANT_A,
-	/*ANT_AC   -> */ ANT_AB,
-	/*ANT_BC   -> */ ANT_AC,
-	/*ANT_ABC  -> */ ANT_ABC,
-};
-
-/**
- * struct iwl4965_rate_scale_data -- tx success history for one rate
- */
-struct iwl4965_rate_scale_data {
-	u64 data;		/* bitmap of successful frames */
-	s32 success_counter;	/* number of frames successful */
-	s32 success_ratio;	/* per-cent * 128  */
-	s32 counter;		/* number of frames attempted */
-	s32 average_tpt;	/* success ratio * expected throughput */
-	unsigned long stamp;
-};
-
-/**
- * struct iwl4965_scale_tbl_info -- tx params and success history for all rates
- *
- * There are two of these in struct iwl4965_lq_sta,
- * one for "active", and one for "search".
- */
-struct iwl4965_scale_tbl_info {
-	enum iwl_table_type lq_type;
-	u8 ant_type;
-	u8 is_SGI;	/* 1 = short guard interval */
-	u8 is_fat;	/* 1 = 40 MHz channel width */
-	u8 is_dup;	/* 1 = duplicated data streams */
-	u8 action;	/* change modulation; IWL_[LEGACY/SISO/MIMO]_SWITCH_* */
-	s32 *expected_tpt;	/* throughput metrics; expected_tpt_G, etc. */
-	u32 current_rate;  /* rate_n_flags, uCode API format */
-	struct iwl4965_rate_scale_data win[IWL_RATE_COUNT]; /* rate histories */
-};
-
-struct iwl4965_traffic_load {
-	unsigned long time_stamp;	/* age of the oldest statistics */
-	u32 packet_count[TID_QUEUE_MAX_SIZE];   /* packet count in this time
-						 * slice */
-	u32 total;			/* total num of packets during the
-					 * last TID_MAX_TIME_DIFF */
-	u8 queue_count;			/* number of queues that has
-					 * been used since the last cleanup */
-	u8 head;			/* start of the circular buffer */
-};
-
-/**
- * struct iwl4965_lq_sta -- driver's rate scaling private structure
- *
- * Pointer to this gets passed back and forth between driver and mac80211.
- */
-struct iwl4965_lq_sta {
-	u8 active_tbl;		/* index of active table, range 0-1 */
-	u8 enable_counter;	/* indicates HT mode */
-	u8 stay_in_tbl;		/* 1: disallow, 0: allow search for new mode */
-	u8 search_better_tbl;	/* 1: currently trying alternate mode */
-	s32 last_tpt;
-
-	/* The following determine when to search for a new mode */
-	u32 table_count_limit;
-	u32 max_failure_limit;	/* # failed frames before new search */
-	u32 max_success_limit;	/* # successful frames before new search */
-	u32 table_count;
-	u32 total_failed;	/* total failed frames, any/all rates */
-	u32 total_success;	/* total successful frames, any/all rates */
-	u32 flush_timer;	/* time staying in mode before new search */
-
-	u8 action_counter;	/* # mode-switch actions tried */
-	u8 is_green;
-	u8 is_dup;
-	enum ieee80211_band band;
-	u8 ibss_sta_added;
-
-	/* The following are bitmaps of rates; IWL_RATE_6M_MASK, etc. */
-	u32 supp_rates;
-	u16 active_legacy_rate;
-	u16 active_siso_rate;
-	u16 active_mimo2_rate;
-	u16 active_mimo3_rate;
-	u16 active_rate_basic;
-
-	struct iwl_link_quality_cmd lq;
-	struct iwl4965_scale_tbl_info lq_info[LQ_SIZE]; /* "active", "search" */
-	struct iwl4965_traffic_load load[TID_MAX_LOAD_COUNT];
-	u8 tx_agg_tid_en;
-#ifdef CONFIG_MAC80211_DEBUGFS
-	struct dentry *rs_sta_dbgfs_scale_table_file;
-	struct dentry *rs_sta_dbgfs_stats_table_file;
-	struct dentry *rs_sta_dbgfs_tx_agg_tid_en_file;
-	u32 dbg_fixed_rate;
-#endif
-	struct iwl_priv *drv;
-};
-
-static void rs_rate_scale_perform(struct iwl_priv *priv,
-				   struct net_device *dev,
-				   struct ieee80211_hdr *hdr,
-				   struct sta_info *sta);
-static void rs_fill_link_cmd(const struct iwl_priv *priv,
-			     struct iwl4965_lq_sta *lq_sta,
-			     u32 rate_n_flags);
-
-
-#ifdef CONFIG_MAC80211_DEBUGFS
-static void rs_dbgfs_set_mcs(struct iwl4965_lq_sta *lq_sta,
-					u32 *rate_n_flags, int index);
-#else
-static void rs_dbgfs_set_mcs(struct iwl4965_lq_sta *lq_sta,
-					u32 *rate_n_flags, int index)
-{}
-#endif
-
-/*
- * Expected throughput metrics for following rates:
- * 1, 2, 5.5, 11, 6, 9, 12, 18, 24, 36, 48, 54, 60 MBits
- * "G" is the only table that supports CCK (the first 4 rates).
- */
-/*FIXME:RS:need to spearate tables for MIMO2/MIMO3*/
-static s32 expected_tpt_A[IWL_RATE_COUNT] = {
-	0, 0, 0, 0, 40, 57, 72, 98, 121, 154, 177, 186, 186
-};
-
-static s32 expected_tpt_G[IWL_RATE_COUNT] = {
-	7, 13, 35, 58, 40, 57, 72, 98, 121, 154, 177, 186, 186
-};
-
-static s32 expected_tpt_siso20MHz[IWL_RATE_COUNT] = {
-	0, 0, 0, 0, 42, 42, 76, 102, 124, 159, 183, 193, 202
-};
-
-static s32 expected_tpt_siso20MHzSGI[IWL_RATE_COUNT] = {
-	0, 0, 0, 0, 46, 46, 82, 110, 132, 168, 192, 202, 211
-};
-
-static s32 expected_tpt_mimo20MHz[IWL_RATE_COUNT] = {
-	0, 0, 0, 0, 74, 74, 123, 155, 179, 214, 236, 244, 251
-};
-
-static s32 expected_tpt_mimo20MHzSGI[IWL_RATE_COUNT] = {
-	0, 0, 0, 0, 81, 81, 131, 164, 188, 222, 243, 251, 257
-};
-
-static s32 expected_tpt_siso40MHz[IWL_RATE_COUNT] = {
-	0, 0, 0, 0, 77, 77, 127, 160, 184, 220, 242, 250, 257
-};
-
-static s32 expected_tpt_siso40MHzSGI[IWL_RATE_COUNT] = {
-	0, 0, 0, 0, 83, 83, 135, 169, 193, 229, 250, 257, 264
-};
-
-static s32 expected_tpt_mimo40MHz[IWL_RATE_COUNT] = {
-	0, 0, 0, 0, 123, 123, 182, 214, 235, 264, 279, 285, 289
-};
-
-static s32 expected_tpt_mimo40MHzSGI[IWL_RATE_COUNT] = {
-	0, 0, 0, 0, 131, 131, 191, 222, 242, 270, 284, 289, 293
-};
-
-static inline u8 rs_extract_rate(u32 rate_n_flags)
-{
-	return (u8)(rate_n_flags & 0xFF);
-}
-
-static void rs_rate_scale_clear_window(struct iwl4965_rate_scale_data *window)
-{
-	window->data = 0;
-	window->success_counter = 0;
-	window->success_ratio = IWL_INVALID_VALUE;
-	window->counter = 0;
-	window->average_tpt = IWL_INVALID_VALUE;
-	window->stamp = 0;
-}
-
-static inline u8 rs_is_valid_ant(u8 valid_antenna, u8 ant_type)
-{
-	return ((ant_type & valid_antenna) == ant_type);
-}
-
-/*
- *	removes the old data from the statistics. All data that is older than
- *	TID_MAX_TIME_DIFF, will be deleted.
- */
-static void rs_tl_rm_old_stats(struct iwl4965_traffic_load *tl, u32 curr_time)
-{
-	/* The oldest age we want to keep */
-	u32 oldest_time = curr_time - TID_MAX_TIME_DIFF;
-
-	while (tl->queue_count &&
-	       (tl->time_stamp < oldest_time)) {
-		tl->total -= tl->packet_count[tl->head];
-		tl->packet_count[tl->head] = 0;
-		tl->time_stamp += TID_QUEUE_CELL_SPACING;
-		tl->queue_count--;
-		tl->head++;
-		if (tl->head >= TID_QUEUE_MAX_SIZE)
-			tl->head = 0;
-	}
-}
-
-/*
- *	increment traffic load value for tid and also remove
- *	any old values if passed the certain time period
- */
-static u8 rs_tl_add_packet(struct iwl4965_lq_sta *lq_data,
-			   struct ieee80211_hdr *hdr)
-{
-	u32 curr_time = jiffies_to_msecs(jiffies);
-	u32 time_diff;
-	s32 index;
-	struct iwl4965_traffic_load *tl = NULL;
-	__le16 fc = hdr->frame_control;
-	u8 tid;
-
-	if (ieee80211_is_data_qos(fc)) {
-		u8 *qc = ieee80211_get_qos_ctl(hdr);
-		tid = qc[0] & 0xf;
-	} else
-		return MAX_TID_COUNT;
-
-	tl = &lq_data->load[tid];
-
-	curr_time -= curr_time % TID_ROUND_VALUE;
-
-	/* Happens only for the first packet. Initialize the data */
-	if (!(tl->queue_count)) {
-		tl->total = 1;
-		tl->time_stamp = curr_time;
-		tl->queue_count = 1;
-		tl->head = 0;
-		tl->packet_count[0] = 1;
-		return MAX_TID_COUNT;
-	}
-
-	time_diff = TIME_WRAP_AROUND(tl->time_stamp, curr_time);
-	index = time_diff / TID_QUEUE_CELL_SPACING;
-
-	/* The history is too long: remove data that is older than */
-	/* TID_MAX_TIME_DIFF */
-	if (index >= TID_QUEUE_MAX_SIZE)
-		rs_tl_rm_old_stats(tl, curr_time);
-
-	index = (tl->head + index) % TID_QUEUE_MAX_SIZE;
-	tl->packet_count[index] = tl->packet_count[index] + 1;
-	tl->total = tl->total + 1;
-
-	if ((index + 1) > tl->queue_count)
-		tl->queue_count = index + 1;
-
-	return tid;
-}
-
-/*
-	get the traffic load value for tid
-*/
-static u32 rs_tl_get_load(struct iwl4965_lq_sta *lq_data, u8 tid)
-{
-	u32 curr_time = jiffies_to_msecs(jiffies);
-	u32 time_diff;
-	s32 index;
-	struct iwl4965_traffic_load *tl = NULL;
-
-	if (tid >= TID_MAX_LOAD_COUNT)
-		return 0;
-
-	tl = &(lq_data->load[tid]);
-
-	curr_time -= curr_time % TID_ROUND_VALUE;
-
-	if (!(tl->queue_count))
-		return 0;
-
-	time_diff = TIME_WRAP_AROUND(tl->time_stamp, curr_time);
-	index = time_diff / TID_QUEUE_CELL_SPACING;
-
-	/* The history is too long: remove data that is older than */
-	/* TID_MAX_TIME_DIFF */
-	if (index >= TID_QUEUE_MAX_SIZE)
-		rs_tl_rm_old_stats(tl, curr_time);
-
-	return tl->total;
-}
-
-static void rs_tl_turn_on_agg_for_tid(struct iwl_priv *priv,
-				struct iwl4965_lq_sta *lq_data, u8 tid,
-				struct sta_info *sta)
-{
-	unsigned long state;
-	DECLARE_MAC_BUF(mac);
-
-	spin_lock_bh(&sta->lock);
-	state = sta->ampdu_mlme.tid_state_tx[tid];
-	spin_unlock_bh(&sta->lock);
-
-	if (state == HT_AGG_STATE_IDLE &&
-	    rs_tl_get_load(lq_data, tid) > IWL_AGG_LOAD_THRESHOLD) {
-		IWL_DEBUG_HT("Starting Tx agg: STA: %s tid: %d\n",
-				print_mac(mac, sta->addr), tid);
-		ieee80211_start_tx_ba_session(priv->hw, sta->addr, tid);
-	}
-}
-
-static void rs_tl_turn_on_agg(struct iwl_priv *priv, u8 tid,
-				struct iwl4965_lq_sta *lq_data,
-				struct sta_info *sta)
-{
-	if ((tid < TID_MAX_LOAD_COUNT))
-		rs_tl_turn_on_agg_for_tid(priv, lq_data, tid, sta);
-	else if (tid == IWL_AGG_ALL_TID)
-		for (tid = 0; tid < TID_MAX_LOAD_COUNT; tid++)
-			rs_tl_turn_on_agg_for_tid(priv, lq_data, tid, sta);
-}
-
-static inline int get_num_of_ant_from_rate(u32 rate_n_flags)
-{
-	return (!!(rate_n_flags & RATE_MCS_ANT_A_MSK) +
-		!!(rate_n_flags & RATE_MCS_ANT_B_MSK) +
-		!!(rate_n_flags & RATE_MCS_ANT_C_MSK));
-}
-
-/**
- * rs_collect_tx_data - Update the success/failure sliding window
- *
- * We keep a sliding window of the last 62 packets transmitted
- * at this rate.  window->data contains the bitmask of successful
- * packets.
- */
-static int rs_collect_tx_data(struct iwl4965_rate_scale_data *windows,
-			      int scale_index, s32 tpt, int retries,
-			      int successes)
-{
-	struct iwl4965_rate_scale_data *window = NULL;
-	static const u64 mask = (((u64)1) << (IWL_RATE_MAX_WINDOW - 1));
-	s32 fail_count;
-
-	if (scale_index < 0 || scale_index >= IWL_RATE_COUNT)
-		return -EINVAL;
-
-	/* Select data for current tx bit rate */
-	window = &(windows[scale_index]);
-
-	/*
-	 * Keep track of only the latest 62 tx frame attempts in this rate's
-	 * history window; anything older isn't really relevant any more.
-	 * If we have filled up the sliding window, drop the oldest attempt;
-	 * if the oldest attempt (highest bit in bitmap) shows "success",
-	 * subtract "1" from the success counter (this is the main reason
-	 * we keep these bitmaps!).
-	 */
-	while (retries > 0) {
-		if (window->counter >= IWL_RATE_MAX_WINDOW) {
-
-			/* remove earliest */
-			window->counter = IWL_RATE_MAX_WINDOW - 1;
-
-			if (window->data & mask) {
-				window->data &= ~mask;
-				window->success_counter--;
-			}
-		}
-
-		/* Increment frames-attempted counter */
-		window->counter++;
-
-		/* Shift bitmap by one frame (throw away oldest history),
-		 * OR in "1", and increment "success" if this
-		 * frame was successful. */
-		window->data <<= 1;;
-		if (successes > 0) {
-			window->success_counter++;
-			window->data |= 0x1;
-			successes--;
-		}
-
-		retries--;
-	}
-
-	/* Calculate current success ratio, avoid divide-by-0! */
-	if (window->counter > 0)
-		window->success_ratio = 128 * (100 * window->success_counter)
-					/ window->counter;
-	else
-		window->success_ratio = IWL_INVALID_VALUE;
-
-	fail_count = window->counter - window->success_counter;
-
-	/* Calculate average throughput, if we have enough history. */
-	if ((fail_count >= IWL_RATE_MIN_FAILURE_TH) ||
-	    (window->success_counter >= IWL_RATE_MIN_SUCCESS_TH))
-		window->average_tpt = (window->success_ratio * tpt + 64) / 128;
-	else
-		window->average_tpt = IWL_INVALID_VALUE;
-
-	/* Tag this window as having been updated */
-	window->stamp = jiffies;
-
-	return 0;
-}
-
-/*
- * Fill uCode API rate_n_flags field, based on "search" or "active" table.
- */
-/* FIXME:RS:remove this function and put the flags statically in the table */
-static u32 rate_n_flags_from_tbl(struct iwl4965_scale_tbl_info *tbl,
-				       int index, u8 use_green)
-{
-	u32 rate_n_flags = 0;
-
-	if (is_legacy(tbl->lq_type)) {
-		rate_n_flags = iwl_rates[index].plcp;
-		if (index >= IWL_FIRST_CCK_RATE && index <= IWL_LAST_CCK_RATE)
-			rate_n_flags |= RATE_MCS_CCK_MSK;
-
-	} else if (is_Ht(tbl->lq_type)) {
-		if (index > IWL_LAST_OFDM_RATE) {
-			IWL_ERROR("invalid HT rate index %d\n", index);
-			index = IWL_LAST_OFDM_RATE;
-		}
-		rate_n_flags = RATE_MCS_HT_MSK;
-
-		if (is_siso(tbl->lq_type))
-			rate_n_flags |=	iwl_rates[index].plcp_siso;
-		else if (is_mimo2(tbl->lq_type))
-			rate_n_flags |=	iwl_rates[index].plcp_mimo2;
-		else
-			rate_n_flags |=	iwl_rates[index].plcp_mimo3;
-	} else {
-		IWL_ERROR("Invalid tbl->lq_type %d\n", tbl->lq_type);
-	}
-
-	rate_n_flags |= ((tbl->ant_type << RATE_MCS_ANT_POS) &
-						     RATE_MCS_ANT_ABC_MSK);
-
-	if (is_Ht(tbl->lq_type)) {
-		if (tbl->is_fat) {
-			if (tbl->is_dup)
-				rate_n_flags |= RATE_MCS_DUP_MSK;
-			else
-				rate_n_flags |= RATE_MCS_FAT_MSK;
-		}
-		if (tbl->is_SGI)
-			rate_n_flags |= RATE_MCS_SGI_MSK;
-
-		if (use_green) {
-			rate_n_flags |= RATE_MCS_GF_MSK;
-			if (is_siso(tbl->lq_type) && tbl->is_SGI) {
-				rate_n_flags &= ~RATE_MCS_SGI_MSK;
-				IWL_ERROR("GF was set with SGI:SISO\n");
-			}
-		}
-	}
-	return rate_n_flags;
-}
-
-/*
- * Interpret uCode API's rate_n_flags format,
- * fill "search" or "active" tx mode table.
- */
-static int rs_get_tbl_info_from_mcs(const u32 rate_n_flags,
-				    enum ieee80211_band band,
-				    struct iwl4965_scale_tbl_info *tbl,
-				    int *rate_idx)
-{
-	u32 ant_msk = (rate_n_flags & RATE_MCS_ANT_ABC_MSK);
-	u8 num_of_ant = get_num_of_ant_from_rate(rate_n_flags);
-	u8 mcs;
-
-	*rate_idx = iwl_hwrate_to_plcp_idx(rate_n_flags);
-
-	if (*rate_idx  == IWL_RATE_INVALID) {
-		*rate_idx = -1;
-		return -EINVAL;
-	}
-	tbl->is_SGI = 0;	/* default legacy setup */
-	tbl->is_fat = 0;
-	tbl->is_dup = 0;
-	tbl->ant_type = (ant_msk >> RATE_MCS_ANT_POS);
-	tbl->lq_type = LQ_NONE;
-
-	/* legacy rate format */
-	if (!(rate_n_flags & RATE_MCS_HT_MSK)) {
-		if (num_of_ant == 1) {
-			if (band == IEEE80211_BAND_5GHZ)
-				tbl->lq_type = LQ_A;
-			else
-				tbl->lq_type = LQ_G;
-		}
-	/* HT rate format */
-	} else {
-		if (rate_n_flags & RATE_MCS_SGI_MSK)
-			tbl->is_SGI = 1;
-
-		if ((rate_n_flags & RATE_MCS_FAT_MSK) ||
-		    (rate_n_flags & RATE_MCS_DUP_MSK))
-			tbl->is_fat = 1;
-
-		if (rate_n_flags & RATE_MCS_DUP_MSK)
-			tbl->is_dup = 1;
-
-		mcs = rs_extract_rate(rate_n_flags);
-
-		/* SISO */
-		if (mcs <= IWL_RATE_SISO_60M_PLCP) {
-			if (num_of_ant == 1)
-				tbl->lq_type = LQ_SISO; /*else NONE*/
-		/* MIMO2 */
-		} else if (mcs <= IWL_RATE_MIMO2_60M_PLCP) {
-			if (num_of_ant == 2)
-				tbl->lq_type = LQ_MIMO2;
-		/* MIMO3 */
-		} else {
-			if (num_of_ant == 3)
-				tbl->lq_type = LQ_MIMO3;
-		}
-	}
-	return 0;
-}
-
-/* switch to another antenna/antennas and return 1 */
-/* if no other valid antenna found, return 0 */
-static int rs_toggle_antenna(u32 valid_ant, u32 *rate_n_flags,
-			      struct iwl4965_scale_tbl_info *tbl)
-{
-	u8 new_ant_type;
-
-	if (!tbl->ant_type || tbl->ant_type > ANT_ABC)
-		return 0;
-
-	if (!rs_is_valid_ant(valid_ant, tbl->ant_type))
-		return 0;
-
-	new_ant_type = ant_toggle_lookup[tbl->ant_type];
-
-	while ((new_ant_type != tbl->ant_type) &&
-	       !rs_is_valid_ant(valid_ant, new_ant_type))
-		new_ant_type = ant_toggle_lookup[new_ant_type];
-
-	if (new_ant_type == tbl->ant_type)
-		return 0;
-
-	tbl->ant_type = new_ant_type;
-	*rate_n_flags &= ~RATE_MCS_ANT_ABC_MSK;
-	*rate_n_flags |= new_ant_type << RATE_MCS_ANT_POS;
-	return 1;
-}
-
-/* FIXME:RS: in 4965 we don't use greenfield at all */
-/* FIXME:RS: don't use greenfield for now in TX */
-#if 0
-static inline u8 rs_use_green(struct iwl_priv *priv, struct ieee80211_conf *conf)
-{
-	return ((conf->flags & IEEE80211_CONF_SUPPORT_HT_MODE) &&
-		priv->current_ht_config.is_green_field &&
-		!priv->current_ht_config.non_GF_STA_present);
-}
-#endif
-static inline u8 rs_use_green(struct iwl_priv *priv, struct ieee80211_conf *conf)
-{
-	return 0;
-}
-
-/**
- * rs_get_supported_rates - get the available rates
- *
- * if management frame or broadcast frame only return
- * basic available rates.
- *
- */
-static u16 rs_get_supported_rates(struct iwl4965_lq_sta *lq_sta,
-				   struct ieee80211_hdr *hdr,
-				   enum iwl_table_type rate_type)
-{
-	if (hdr && is_multicast_ether_addr(hdr->addr1) &&
-	    lq_sta->active_rate_basic)
-		return lq_sta->active_rate_basic;
-
-	if (is_legacy(rate_type)) {
-		return lq_sta->active_legacy_rate;
-	} else {
-		if (is_siso(rate_type))
-			return lq_sta->active_siso_rate;
-		else if (is_mimo2(rate_type))
-			return lq_sta->active_mimo2_rate;
-		else
-			return lq_sta->active_mimo3_rate;
-	}
-}
-
-static u16 rs_get_adjacent_rate(struct iwl_priv *priv, u8 index, u16 rate_mask,
-				int rate_type)
-{
-	u8 high = IWL_RATE_INVALID;
-	u8 low = IWL_RATE_INVALID;
-
-	/* 802.11A or ht walks to the next literal adjacent rate in
-	 * the rate table */
-	if (is_a_band(rate_type) || !is_legacy(rate_type)) {
-		int i;
-		u32 mask;
-
-		/* Find the previous rate that is in the rate mask */
-		i = index - 1;
-		for (mask = (1 << i); i >= 0; i--, mask >>= 1) {
-			if (rate_mask & mask) {
-				low = i;
-				break;
-			}
-		}
-
-		/* Find the next rate that is in the rate mask */
-		i = index + 1;
-		for (mask = (1 << i); i < IWL_RATE_COUNT; i++, mask <<= 1) {
-			if (rate_mask & mask) {
-				high = i;
-				break;
-			}
-		}
-
-		return (high << 8) | low;
-	}
-
-	low = index;
-	while (low != IWL_RATE_INVALID) {
-		low = iwl_rates[low].prev_rs;
-		if (low == IWL_RATE_INVALID)
-			break;
-		if (rate_mask & (1 << low))
-			break;
-		IWL_DEBUG_RATE("Skipping masked lower rate: %d\n", low);
-	}
-
-	high = index;
-	while (high != IWL_RATE_INVALID) {
-		high = iwl_rates[high].next_rs;
-		if (high == IWL_RATE_INVALID)
-			break;
-		if (rate_mask & (1 << high))
-			break;
-		IWL_DEBUG_RATE("Skipping masked higher rate: %d\n", high);
-	}
-
-	return (high << 8) | low;
-}
-
-static u32 rs_get_lower_rate(struct iwl4965_lq_sta *lq_sta,
-			     struct iwl4965_scale_tbl_info *tbl, u8 scale_index,
-			     u8 ht_possible)
-{
-	s32 low;
-	u16 rate_mask;
-	u16 high_low;
-	u8 switch_to_legacy = 0;
-	u8 is_green = lq_sta->is_green;
-
-	/* check if we need to switch from HT to legacy rates.
-	 * assumption is that mandatory rates (1Mbps or 6Mbps)
-	 * are always supported (spec demand) */
-	if (!is_legacy(tbl->lq_type) && (!ht_possible || !scale_index)) {
-		switch_to_legacy = 1;
-		scale_index = rs_ht_to_legacy[scale_index];
-		if (lq_sta->band == IEEE80211_BAND_5GHZ)
-			tbl->lq_type = LQ_A;
-		else
-			tbl->lq_type = LQ_G;
-
-		if (num_of_ant(tbl->ant_type) > 1)
-			tbl->ant_type = ANT_A;/*FIXME:RS*/
-
-		tbl->is_fat = 0;
-		tbl->is_SGI = 0;
-	}
-
-	rate_mask = rs_get_supported_rates(lq_sta, NULL, tbl->lq_type);
-
-	/* Mask with station rate restriction */
-	if (is_legacy(tbl->lq_type)) {
-		/* supp_rates has no CCK bits in A mode */
-		if (lq_sta->band == IEEE80211_BAND_5GHZ)
-			rate_mask  = (u16)(rate_mask &
-			   (lq_sta->supp_rates << IWL_FIRST_OFDM_RATE));
-		else
-			rate_mask = (u16)(rate_mask & lq_sta->supp_rates);
-	}
-
-	/* If we switched from HT to legacy, check current rate */
-	if (switch_to_legacy && (rate_mask & (1 << scale_index))) {
-		low = scale_index;
-		goto out;
-	}
-
-	high_low = rs_get_adjacent_rate(lq_sta->drv, scale_index, rate_mask,
-					tbl->lq_type);
-	low = high_low & 0xff;
-
-	if (low == IWL_RATE_INVALID)
-		low = scale_index;
-
-out:
-	return rate_n_flags_from_tbl(tbl, low, is_green);
-}
-
-/*
- * mac80211 sends us Tx status
- */
-static void rs_tx_status(void *priv_rate, struct net_device *dev,
-			 struct sk_buff *skb)
-{
-	int status;
-	u8 retries;
-	int rs_index, index = 0;
-	struct iwl4965_lq_sta *lq_sta;
-	struct iwl_link_quality_cmd *table;
-	struct sta_info *sta;
-	struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data;
-	struct iwl_priv *priv = (struct iwl_priv *)priv_rate;
-	struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr);
-	struct ieee80211_hw *hw = local_to_hw(local);
-	struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
-	struct iwl4965_rate_scale_data *window = NULL;
-	struct iwl4965_rate_scale_data *search_win = NULL;
-	u32 tx_rate;
-	struct iwl4965_scale_tbl_info tbl_type;
-	struct iwl4965_scale_tbl_info *curr_tbl, *search_tbl;
-	u8 active_index = 0;
-	__le16 fc = hdr->frame_control;
-	s32 tpt = 0;
-
-	IWL_DEBUG_RATE_LIMIT("get frame ack response, update rate scale window\n");
-
-	if (!ieee80211_is_data(fc) || is_multicast_ether_addr(hdr->addr1))
-		return;
-
-	/* This packet was aggregated but doesn't carry rate scale info */
-	if ((info->flags & IEEE80211_TX_CTL_AMPDU) &&
-	    !(info->flags & IEEE80211_TX_STAT_AMPDU))
-		return;
-
-	retries = info->status.retry_count;
-
-	if (retries > 15)
-		retries = 15;
-
-	rcu_read_lock();
-
-	sta = sta_info_get(local, hdr->addr1);
-
-	if (!sta || !sta->rate_ctrl_priv)
-		goto out;
-
-
-	lq_sta = (struct iwl4965_lq_sta *)sta->rate_ctrl_priv;
-
-	if ((priv->iw_mode == IEEE80211_IF_TYPE_IBSS) &&
-	    !lq_sta->ibss_sta_added)
-		goto out;
-
-	table = &lq_sta->lq;
-	active_index = lq_sta->active_tbl;
-
-	curr_tbl = &(lq_sta->lq_info[active_index]);
-	search_tbl = &(lq_sta->lq_info[(1 - active_index)]);
-	window = (struct iwl4965_rate_scale_data *)
-	    &(curr_tbl->win[0]);
-	search_win = (struct iwl4965_rate_scale_data *)
-	    &(search_tbl->win[0]);
-
-	/*
-	 * Ignore this Tx frame response if its initial rate doesn't match
-	 * that of latest Link Quality command.  There may be stragglers
-	 * from a previous Link Quality command, but we're no longer interested
-	 * in those; they're either from the "active" mode while we're trying
-	 * to check "search" mode, or a prior "search" mode after we've moved
-	 * to a new "search" mode (which might become the new "active" mode).
-	 */
-	tx_rate = le32_to_cpu(table->rs_table[0].rate_n_flags);
-	rs_get_tbl_info_from_mcs(tx_rate, priv->band, &tbl_type, &rs_index);
-	if (priv->band == IEEE80211_BAND_5GHZ)
-		rs_index -= IWL_FIRST_OFDM_RATE;
-
-	if ((info->tx_rate_idx < 0) ||
-	    (tbl_type.is_SGI ^
-		!!(info->flags & IEEE80211_TX_CTL_SHORT_GI)) ||
-	    (tbl_type.is_fat ^
-		!!(info->flags & IEEE80211_TX_CTL_40_MHZ_WIDTH)) ||
-	    (tbl_type.is_dup ^
-		!!(info->flags & IEEE80211_TX_CTL_DUP_DATA)) ||
-	    (tbl_type.ant_type ^ info->antenna_sel_tx) ||
-	    (!!(tx_rate & RATE_MCS_HT_MSK) ^
-		!!(info->flags & IEEE80211_TX_CTL_OFDM_HT)) ||
-	    (!!(tx_rate & RATE_MCS_GF_MSK) ^
-		!!(info->flags & IEEE80211_TX_CTL_GREEN_FIELD)) ||
-	    (hw->wiphy->bands[priv->band]->bitrates[rs_index].bitrate !=
-	     hw->wiphy->bands[info->band]->bitrates[info->tx_rate_idx].bitrate)) {
-		IWL_DEBUG_RATE("initial rate does not match 0x%x\n", tx_rate);
-		goto out;
-	}
-
-	/* Update frame history window with "failure" for each Tx retry. */
-	while (retries) {
-		/* Look up the rate and other info used for each tx attempt.
-		 * Each tx attempt steps one entry deeper in the rate table. */
-		tx_rate = le32_to_cpu(table->rs_table[index].rate_n_flags);
-		rs_get_tbl_info_from_mcs(tx_rate, priv->band,
-					  &tbl_type, &rs_index);
-
-		/* If type matches "search" table,
-		 * add failure to "search" history */
-		if ((tbl_type.lq_type == search_tbl->lq_type) &&
-		    (tbl_type.ant_type == search_tbl->ant_type) &&
-		    (tbl_type.is_SGI == search_tbl->is_SGI)) {
-			if (search_tbl->expected_tpt)
-				tpt = search_tbl->expected_tpt[rs_index];
-			else
-				tpt = 0;
-			rs_collect_tx_data(search_win, rs_index, tpt, 1, 0);
-
-		/* Else if type matches "current/active" table,
-		 * add failure to "current/active" history */
-		} else if ((tbl_type.lq_type == curr_tbl->lq_type) &&
-			   (tbl_type.ant_type == curr_tbl->ant_type) &&
-			   (tbl_type.is_SGI == curr_tbl->is_SGI)) {
-			if (curr_tbl->expected_tpt)
-				tpt = curr_tbl->expected_tpt[rs_index];
-			else
-				tpt = 0;
-			rs_collect_tx_data(window, rs_index, tpt, 1, 0);
-		}
-
-		/* If not searching for a new mode, increment failed counter
-		 * ... this helps determine when to start searching again */
-		if (lq_sta->stay_in_tbl)
-			lq_sta->total_failed++;
-		--retries;
-		index++;
-
-	}
-
-	/*
-	 * Find (by rate) the history window to update with final Tx attempt;
-	 * if Tx was successful first try, use original rate,
-	 * else look up the rate that was, finally, successful.
-	 */
-	tx_rate = le32_to_cpu(table->rs_table[index].rate_n_flags);
-	rs_get_tbl_info_from_mcs(tx_rate, priv->band, &tbl_type, &rs_index);
-
-	/* Update frame history window with "success" if Tx got ACKed ... */
-	status = !!(info->flags & IEEE80211_TX_STAT_ACK);
-
-	/* If type matches "search" table,
-	 * add final tx status to "search" history */
-	if ((tbl_type.lq_type == search_tbl->lq_type) &&
-	    (tbl_type.ant_type == search_tbl->ant_type) &&
-	    (tbl_type.is_SGI == search_tbl->is_SGI)) {
-		if (search_tbl->expected_tpt)
-			tpt = search_tbl->expected_tpt[rs_index];
-		else
-			tpt = 0;
-		if (info->flags & IEEE80211_TX_CTL_AMPDU)
-			rs_collect_tx_data(search_win, rs_index, tpt,
-					   info->status.ampdu_ack_len,
-					   info->status.ampdu_ack_map);
-		else
-			rs_collect_tx_data(search_win, rs_index, tpt,
-					   1, status);
-	/* Else if type matches "current/active" table,
-	 * add final tx status to "current/active" history */
-	} else if ((tbl_type.lq_type == curr_tbl->lq_type) &&
-		   (tbl_type.ant_type == curr_tbl->ant_type) &&
-		   (tbl_type.is_SGI == curr_tbl->is_SGI)) {
-		if (curr_tbl->expected_tpt)
-			tpt = curr_tbl->expected_tpt[rs_index];
-		else
-			tpt = 0;
-		if (info->flags & IEEE80211_TX_CTL_AMPDU)
-			rs_collect_tx_data(window, rs_index, tpt,
-					   info->status.ampdu_ack_len,
-					   info->status.ampdu_ack_map);
-		else
-			rs_collect_tx_data(window, rs_index, tpt,
-					   1, status);
-	}
-
-	/* If not searching for new mode, increment success/failed counter
-	 * ... these help determine when to start searching again */
-	if (lq_sta->stay_in_tbl) {
-		if (info->flags & IEEE80211_TX_CTL_AMPDU) {
-			lq_sta->total_success += info->status.ampdu_ack_map;
-			lq_sta->total_failed +=
-			     (info->status.ampdu_ack_len - info->status.ampdu_ack_map);
-		} else {
-			if (status)
-				lq_sta->total_success++;
-			else
-				lq_sta->total_failed++;
-		}
-	}
-
-	/* See if there's a better rate or modulation mode to try. */
-	rs_rate_scale_perform(priv, dev, hdr, sta);
-out:
-	rcu_read_unlock();
-	return;
-}
-
-/*
- * Begin a period of staying with a selected modulation mode.
- * Set "stay_in_tbl" flag to prevent any mode switches.
- * Set frame tx success limits according to legacy vs. high-throughput,
- * and reset overall (spanning all rates) tx success history statistics.
- * These control how long we stay using same modulation mode before
- * searching for a new mode.
- */
-static void rs_set_stay_in_table(struct iwl_priv *priv, u8 is_legacy,
-				 struct iwl4965_lq_sta *lq_sta)
-{
-	IWL_DEBUG_RATE("we are staying in the same table\n");
-	lq_sta->stay_in_tbl = 1;	/* only place this gets set */
-	if (is_legacy) {
-		lq_sta->table_count_limit = IWL_LEGACY_TABLE_COUNT;
-		lq_sta->max_failure_limit = IWL_LEGACY_FAILURE_LIMIT;
-		lq_sta->max_success_limit = IWL_LEGACY_SUCCESS_LIMIT;
-	} else {
-		lq_sta->table_count_limit = IWL_NONE_LEGACY_TABLE_COUNT;
-		lq_sta->max_failure_limit = IWL_NONE_LEGACY_FAILURE_LIMIT;
-		lq_sta->max_success_limit = IWL_NONE_LEGACY_SUCCESS_LIMIT;
-	}
-	lq_sta->table_count = 0;
-	lq_sta->total_failed = 0;
-	lq_sta->total_success = 0;
-}
-
-/*
- * Find correct throughput table for given mode of modulation
- */
-static void rs_set_expected_tpt_table(struct iwl4965_lq_sta *lq_sta,
-				      struct iwl4965_scale_tbl_info *tbl)
-{
-	if (is_legacy(tbl->lq_type)) {
-		if (!is_a_band(tbl->lq_type))
-			tbl->expected_tpt = expected_tpt_G;
-		else
-			tbl->expected_tpt = expected_tpt_A;
-	} else if (is_siso(tbl->lq_type)) {
-		if (tbl->is_fat && !lq_sta->is_dup)
-			if (tbl->is_SGI)
-				tbl->expected_tpt = expected_tpt_siso40MHzSGI;
-			else
-				tbl->expected_tpt = expected_tpt_siso40MHz;
-		else if (tbl->is_SGI)
-			tbl->expected_tpt = expected_tpt_siso20MHzSGI;
-		else
-			tbl->expected_tpt = expected_tpt_siso20MHz;
-
-	} else if (is_mimo(tbl->lq_type)) { /* FIXME:need to separate mimo2/3 */
-		if (tbl->is_fat && !lq_sta->is_dup)
-			if (tbl->is_SGI)
-				tbl->expected_tpt = expected_tpt_mimo40MHzSGI;
-			else
-				tbl->expected_tpt = expected_tpt_mimo40MHz;
-		else if (tbl->is_SGI)
-			tbl->expected_tpt = expected_tpt_mimo20MHzSGI;
-		else
-			tbl->expected_tpt = expected_tpt_mimo20MHz;
-	} else
-		tbl->expected_tpt = expected_tpt_G;
-}
-
-/*
- * Find starting rate for new "search" high-throughput mode of modulation.
- * Goal is to find lowest expected rate (under perfect conditions) that is
- * above the current measured throughput of "active" mode, to give new mode
- * a fair chance to prove itself without too many challenges.
- *
- * This gets called when transitioning to more aggressive modulation
- * (i.e. legacy to SISO or MIMO, or SISO to MIMO), as well as less aggressive
- * (i.e. MIMO to SISO).  When moving to MIMO, bit rate will typically need
- * to decrease to match "active" throughput.  When moving from MIMO to SISO,
- * bit rate will typically need to increase, but not if performance was bad.
- */
-static s32 rs_get_best_rate(struct iwl_priv *priv,
-			    struct iwl4965_lq_sta *lq_sta,
-			    struct iwl4965_scale_tbl_info *tbl,	/* "search" */
-			    u16 rate_mask, s8 index)
-{
-	/* "active" values */
-	struct iwl4965_scale_tbl_info *active_tbl =
-	    &(lq_sta->lq_info[lq_sta->active_tbl]);
-	s32 active_sr = active_tbl->win[index].success_ratio;
-	s32 active_tpt = active_tbl->expected_tpt[index];
-
-	/* expected "search" throughput */
-	s32 *tpt_tbl = tbl->expected_tpt;
-
-	s32 new_rate, high, low, start_hi;
-	u16 high_low;
-	s8 rate = index;
-
-	new_rate = high = low = start_hi = IWL_RATE_INVALID;
-
-	for (; ;) {
-		high_low = rs_get_adjacent_rate(priv, rate, rate_mask,
-						tbl->lq_type);
-
-		low = high_low & 0xff;
-		high = (high_low >> 8) & 0xff;
-
-		/*
-		 * Lower the "search" bit rate, to give new "search" mode
-		 * approximately the same throughput as "active" if:
-		 *
-		 * 1) "Active" mode has been working modestly well (but not
-		 *    great), and expected "search" throughput (under perfect
-		 *    conditions) at candidate rate is above the actual
-		 *    measured "active" throughput (but less than expected
-		 *    "active" throughput under perfect conditions).
-		 * OR
-		 * 2) "Active" mode has been working perfectly or very well
-		 *    and expected "search" throughput (under perfect
-		 *    conditions) at candidate rate is above expected
-		 *    "active" throughput (under perfect conditions).
-		 */
-		if ((((100 * tpt_tbl[rate]) > lq_sta->last_tpt) &&
-		     ((active_sr > IWL_RATE_DECREASE_TH) &&
-		      (active_sr <= IWL_RATE_HIGH_TH) &&
-		      (tpt_tbl[rate] <= active_tpt))) ||
-		    ((active_sr >= IWL_RATE_SCALE_SWITCH) &&
-		     (tpt_tbl[rate] > active_tpt))) {
-
-			/* (2nd or later pass)
-			 * If we've already tried to raise the rate, and are
-			 * now trying to lower it, use the higher rate. */
-			if (start_hi != IWL_RATE_INVALID) {
-				new_rate = start_hi;
-				break;
-			}
-
-			new_rate = rate;
-
-			/* Loop again with lower rate */
-			if (low != IWL_RATE_INVALID)
-				rate = low;
-
-			/* Lower rate not available, use the original */
-			else
-				break;
-
-		/* Else try to raise the "search" rate to match "active" */
-		} else {
-			/* (2nd or later pass)
-			 * If we've already tried to lower the rate, and are
-			 * now trying to raise it, use the lower rate. */
-			if (new_rate != IWL_RATE_INVALID)
-				break;
-
-			/* Loop again with higher rate */
-			else if (high != IWL_RATE_INVALID) {
-				start_hi = high;
-				rate = high;
-
-			/* Higher rate not available, use the original */
-			} else {
-				break;
-			}
-		}
-	}
-
-	return new_rate;
-}
-
-/*
- * Set up search table for MIMO
- */
-static int rs_switch_to_mimo2(struct iwl_priv *priv,
-			     struct iwl4965_lq_sta *lq_sta,
-			     struct ieee80211_conf *conf,
-			     struct sta_info *sta,
-			     struct iwl4965_scale_tbl_info *tbl, int index)
-{
-	u16 rate_mask;
-	s32 rate;
-	s8 is_green = lq_sta->is_green;
-
-	if (!(conf->flags & IEEE80211_CONF_SUPPORT_HT_MODE) ||
-	    !sta->ht_info.ht_supported)
-		return -1;
-
-	if (priv->current_ht_config.tx_mimo_ps_mode == IWL_MIMO_PS_STATIC)
-		return -1;
-
-	/* Need both Tx chains/antennas to support MIMO */
-	if (priv->hw_params.tx_chains_num < 2)
-		return -1;
-
-	IWL_DEBUG_RATE("LQ: try to switch to MIMO2\n");
-
-	tbl->lq_type = LQ_MIMO2;
-	tbl->is_dup = lq_sta->is_dup;
-	tbl->action = 0;
-	rate_mask = lq_sta->active_mimo2_rate;
-
-	if (priv->current_ht_config.supported_chan_width
-					== IWL_CHANNEL_WIDTH_40MHZ)
-		tbl->is_fat = 1;
-	else
-		tbl->is_fat = 0;
-
-	/* FIXME: - don't toggle SGI here
-	if (tbl->is_fat) {
-		if (priv->current_ht_config.sgf & HT_SHORT_GI_40MHZ_ONLY)
-			tbl->is_SGI = 1;
-		else
-			tbl->is_SGI = 0;
-	} else if (priv->current_ht_config.sgf & HT_SHORT_GI_20MHZ_ONLY)
-		tbl->is_SGI = 1;
-	else
-		tbl->is_SGI = 0;
-	*/
-
-	rs_set_expected_tpt_table(lq_sta, tbl);
-
-	rate = rs_get_best_rate(priv, lq_sta, tbl, rate_mask, index);
-
-	IWL_DEBUG_RATE("LQ: MIMO2 best rate %d mask %X\n", rate, rate_mask);
-
-	if ((rate == IWL_RATE_INVALID) || !((1 << rate) & rate_mask)) {
-		IWL_DEBUG_RATE("Can't switch with index %d rate mask %x\n",
-						rate, rate_mask);
-		return -1;
-	}
-	tbl->current_rate = rate_n_flags_from_tbl(tbl, rate, is_green);
-
-	IWL_DEBUG_RATE("LQ: Switch to new mcs %X index is green %X\n",
-		     tbl->current_rate, is_green);
-	return 0;
-}
-
-/*
- * Set up search table for SISO
- */
-static int rs_switch_to_siso(struct iwl_priv *priv,
-			     struct iwl4965_lq_sta *lq_sta,
-			     struct ieee80211_conf *conf,
-			     struct sta_info *sta,
-			     struct iwl4965_scale_tbl_info *tbl, int index)
-{
-	u16 rate_mask;
-	u8 is_green = lq_sta->is_green;
-	s32 rate;
-
-	if (!(conf->flags & IEEE80211_CONF_SUPPORT_HT_MODE) ||
-	    !sta->ht_info.ht_supported)
-		return -1;
-
-	IWL_DEBUG_RATE("LQ: try to switch to SISO\n");
-
-	tbl->is_dup = lq_sta->is_dup;
-	tbl->lq_type = LQ_SISO;
-	tbl->action = 0;
-	rate_mask = lq_sta->active_siso_rate;
-
-	if (priv->current_ht_config.supported_chan_width
-	    == IWL_CHANNEL_WIDTH_40MHZ)
-		tbl->is_fat = 1;
-	else
-		tbl->is_fat = 0;
-
-	/* FIXME: - don't toggle SGI here
-	if (tbl->is_fat) {
-		if (priv->current_ht_config.sgf & HT_SHORT_GI_40MHZ_ONLY)
-			tbl->is_SGI = 1;
-		else
-			tbl->is_SGI = 0;
-	} else if (priv->current_ht_config.sgf & HT_SHORT_GI_20MHZ_ONLY)
-		tbl->is_SGI = 1;
-	else
-		tbl->is_SGI = 0;
-	*/
-
-	if (is_green)
-		tbl->is_SGI = 0; /*11n spec: no SGI in SISO+Greenfield*/
-
-	rs_set_expected_tpt_table(lq_sta, tbl);
-	rate = rs_get_best_rate(priv, lq_sta, tbl, rate_mask, index);
-
-	IWL_DEBUG_RATE("LQ: get best rate %d mask %X\n", rate, rate_mask);
-	if ((rate == IWL_RATE_INVALID) || !((1 << rate) & rate_mask)) {
-		IWL_DEBUG_RATE("can not switch with index %d rate mask %x\n",
-			     rate, rate_mask);
-		return -1;
-	}
-	tbl->current_rate = rate_n_flags_from_tbl(tbl, rate, is_green);
-	IWL_DEBUG_RATE("LQ: Switch to new mcs %X index is green %X\n",
-		     tbl->current_rate, is_green);
-	return 0;
-}
-
-/*
- * Try to switch to new modulation mode from legacy
- */
-static int rs_move_legacy_other(struct iwl_priv *priv,
-				struct iwl4965_lq_sta *lq_sta,
-				struct ieee80211_conf *conf,
-				struct sta_info *sta,
-				int index)
-{
-	struct iwl4965_scale_tbl_info *tbl =
-	    &(lq_sta->lq_info[lq_sta->active_tbl]);
-	struct iwl4965_scale_tbl_info *search_tbl =
-	    &(lq_sta->lq_info[(1 - lq_sta->active_tbl)]);
-	struct iwl4965_rate_scale_data *window = &(tbl->win[index]);
-	u32 sz = (sizeof(struct iwl4965_scale_tbl_info) -
-		  (sizeof(struct iwl4965_rate_scale_data) * IWL_RATE_COUNT));
-	u8 start_action = tbl->action;
-	u8 valid_tx_ant = priv->hw_params.valid_tx_ant;
-	int ret = 0;
-
-	for (; ;) {
-		switch (tbl->action) {
-		case IWL_LEGACY_SWITCH_ANTENNA:
-			IWL_DEBUG_RATE("LQ: Legacy toggle Antenna\n");
-
-			lq_sta->action_counter++;
-
-			/* Don't change antenna if success has been great */
-			if (window->success_ratio >= IWL_RS_GOOD_RATIO)
-				break;
-
-			/* Set up search table to try other antenna */
-			memcpy(search_tbl, tbl, sz);
-
-			if (rs_toggle_antenna(valid_tx_ant,
-				&search_tbl->current_rate, search_tbl)) {
-				lq_sta->search_better_tbl = 1;
-				goto out;
-			}
-			break;
-		case IWL_LEGACY_SWITCH_SISO:
-			IWL_DEBUG_RATE("LQ: Legacy switch to SISO\n");
-
-			/* Set up search table to try SISO */
-			memcpy(search_tbl, tbl, sz);
-			search_tbl->is_SGI = 0;
-			ret = rs_switch_to_siso(priv, lq_sta, conf, sta,
-						 search_tbl, index);
-			if (!ret) {
-				lq_sta->search_better_tbl = 1;
-				lq_sta->action_counter = 0;
-				goto out;
-			}
-
-			break;
-		case IWL_LEGACY_SWITCH_MIMO2:
-			IWL_DEBUG_RATE("LQ: Legacy switch to MIMO2\n");
-
-			/* Set up search table to try MIMO */
-			memcpy(search_tbl, tbl, sz);
-			search_tbl->is_SGI = 0;
-			search_tbl->ant_type = ANT_AB;/*FIXME:RS*/
-				/*FIXME:RS:need to check ant validity*/
-			ret = rs_switch_to_mimo2(priv, lq_sta, conf, sta,
-						 search_tbl, index);
-			if (!ret) {
-				lq_sta->search_better_tbl = 1;
-				lq_sta->action_counter = 0;
-				goto out;
-			}
-			break;
-		}
-		tbl->action++;
-		if (tbl->action > IWL_LEGACY_SWITCH_MIMO2)
-			tbl->action = IWL_LEGACY_SWITCH_ANTENNA;
-
-		if (tbl->action == start_action)
-			break;
-
-	}
-	return 0;
-
- out:
-	tbl->action++;
-	if (tbl->action > IWL_LEGACY_SWITCH_MIMO2)
-		tbl->action = IWL_LEGACY_SWITCH_ANTENNA;
-	return 0;
-
-}
-
-/*
- * Try to switch to new modulation mode from SISO
- */
-static int rs_move_siso_to_other(struct iwl_priv *priv,
-				 struct iwl4965_lq_sta *lq_sta,
-				 struct ieee80211_conf *conf,
-				 struct sta_info *sta,
-				 int index)
-{
-	u8 is_green = lq_sta->is_green;
-	struct iwl4965_scale_tbl_info *tbl =
-	    &(lq_sta->lq_info[lq_sta->active_tbl]);
-	struct iwl4965_scale_tbl_info *search_tbl =
-	    &(lq_sta->lq_info[(1 - lq_sta->active_tbl)]);
-	struct iwl4965_rate_scale_data *window = &(tbl->win[index]);
-	u32 sz = (sizeof(struct iwl4965_scale_tbl_info) -
-		  (sizeof(struct iwl4965_rate_scale_data) * IWL_RATE_COUNT));
-	u8 start_action = tbl->action;
-	u8 valid_tx_ant = priv->hw_params.valid_tx_ant;
-	int ret;
-
-	for (;;) {
-		lq_sta->action_counter++;
-		switch (tbl->action) {
-		case IWL_SISO_SWITCH_ANTENNA:
-			IWL_DEBUG_RATE("LQ: SISO toggle Antenna\n");
-			if (window->success_ratio >= IWL_RS_GOOD_RATIO)
-				break;
-
-			memcpy(search_tbl, tbl, sz);
-			if (rs_toggle_antenna(valid_tx_ant,
-				       &search_tbl->current_rate, search_tbl)) {
-				lq_sta->search_better_tbl = 1;
-				goto out;
-			}
-			break;
-		case IWL_SISO_SWITCH_MIMO2:
-			IWL_DEBUG_RATE("LQ: SISO switch to MIMO2\n");
-			memcpy(search_tbl, tbl, sz);
-			search_tbl->is_SGI = 0;
-			search_tbl->ant_type = ANT_AB; /*FIXME:RS*/
-			ret = rs_switch_to_mimo2(priv, lq_sta, conf, sta,
-						 search_tbl, index);
-			if (!ret) {
-				lq_sta->search_better_tbl = 1;
-				goto out;
-			}
-			break;
-		case IWL_SISO_SWITCH_GI:
-			if (!tbl->is_fat &&
-				!(priv->current_ht_config.sgf &
-						HT_SHORT_GI_20MHZ))
-				break;
-			if (tbl->is_fat &&
-				!(priv->current_ht_config.sgf &
-						HT_SHORT_GI_40MHZ))
-				break;
-
-			IWL_DEBUG_RATE("LQ: SISO toggle SGI/NGI\n");
-
-			memcpy(search_tbl, tbl, sz);
-			if (is_green) {
-				if (!tbl->is_SGI)
-					break;
-				else
-					IWL_ERROR("SGI was set in GF+SISO\n");
-			}
-			search_tbl->is_SGI = !tbl->is_SGI;
-			rs_set_expected_tpt_table(lq_sta, search_tbl);
-			if (tbl->is_SGI) {
-				s32 tpt = lq_sta->last_tpt / 100;
-				if (tpt >= search_tbl->expected_tpt[index])
-					break;
-			}
-			search_tbl->current_rate = rate_n_flags_from_tbl(
-						search_tbl, index, is_green);
-			lq_sta->search_better_tbl = 1;
-			goto out;
-		}
-		tbl->action++;
-		if (tbl->action > IWL_SISO_SWITCH_GI)
-			tbl->action = IWL_SISO_SWITCH_ANTENNA;
-
-		if (tbl->action == start_action)
-			break;
-	}
-	return 0;
-
- out:
-	tbl->action++;
-	if (tbl->action > IWL_SISO_SWITCH_GI)
-		tbl->action = IWL_SISO_SWITCH_ANTENNA;
-	return 0;
-}
-
-/*
- * Try to switch to new modulation mode from MIMO
- */
-static int rs_move_mimo_to_other(struct iwl_priv *priv,
-				 struct iwl4965_lq_sta *lq_sta,
-				 struct ieee80211_conf *conf,
-				 struct sta_info *sta,
-				 int index)
-{
-	s8 is_green = lq_sta->is_green;
-	struct iwl4965_scale_tbl_info *tbl =
-	    &(lq_sta->lq_info[lq_sta->active_tbl]);
-	struct iwl4965_scale_tbl_info *search_tbl =
-	    &(lq_sta->lq_info[(1 - lq_sta->active_tbl)]);
-	u32 sz = (sizeof(struct iwl4965_scale_tbl_info) -
-		  (sizeof(struct iwl4965_rate_scale_data) * IWL_RATE_COUNT));
-	u8 start_action = tbl->action;
-	/*u8 valid_tx_ant = priv->hw_params.valid_tx_ant;*/
-	int ret;
-
-	for (;;) {
-		lq_sta->action_counter++;
-		switch (tbl->action) {
-		case IWL_MIMO_SWITCH_ANTENNA_A:
-		case IWL_MIMO_SWITCH_ANTENNA_B:
-			IWL_DEBUG_RATE("LQ: MIMO2 switch to SISO\n");
-
-			/* Set up new search table for SISO */
-			memcpy(search_tbl, tbl, sz);
-
-			/*FIXME:RS:need to check ant validity + C*/
-			if (tbl->action == IWL_MIMO_SWITCH_ANTENNA_A)
-				search_tbl->ant_type = ANT_A;
-			else
-				search_tbl->ant_type = ANT_B;
-
-			ret = rs_switch_to_siso(priv, lq_sta, conf, sta,
-						 search_tbl, index);
-			if (!ret) {
-				lq_sta->search_better_tbl = 1;
-				goto out;
-			}
-			break;
-
-		case IWL_MIMO_SWITCH_GI:
-			if (!tbl->is_fat &&
-				!(priv->current_ht_config.sgf &
-						HT_SHORT_GI_20MHZ))
-				break;
-			if (tbl->is_fat &&
-				!(priv->current_ht_config.sgf &
-						HT_SHORT_GI_40MHZ))
-				break;
-
-			IWL_DEBUG_RATE("LQ: MIMO toggle SGI/NGI\n");
-
-			/* Set up new search table for MIMO */
-			memcpy(search_tbl, tbl, sz);
-			search_tbl->is_SGI = !tbl->is_SGI;
-			rs_set_expected_tpt_table(lq_sta, search_tbl);
-			/*
-			 * If active table already uses the fastest possible
-			 * modulation (dual stream with short guard interval),
-			 * and it's working well, there's no need to look
-			 * for a better type of modulation!
-			 */
-			if (tbl->is_SGI) {
-				s32 tpt = lq_sta->last_tpt / 100;
-				if (tpt >= search_tbl->expected_tpt[index])
-					break;
-			}
-			search_tbl->current_rate = rate_n_flags_from_tbl(
-						search_tbl, index, is_green);
-			lq_sta->search_better_tbl = 1;
-			goto out;
-
-		}
-		tbl->action++;
-		if (tbl->action > IWL_MIMO_SWITCH_GI)
-			tbl->action = IWL_MIMO_SWITCH_ANTENNA_A;
-
-		if (tbl->action == start_action)
-			break;
-	}
-
-	return 0;
- out:
-	tbl->action++;
-	if (tbl->action > IWL_MIMO_SWITCH_GI)
-		tbl->action = IWL_MIMO_SWITCH_ANTENNA_A;
-	return 0;
-
-}
-
-/*
- * Check whether we should continue using same modulation mode, or
- * begin search for a new mode, based on:
- * 1) # tx successes or failures while using this mode
- * 2) # times calling this function
- * 3) elapsed time in this mode (not used, for now)
- */
-static void rs_stay_in_table(struct iwl4965_lq_sta *lq_sta)
-{
-	struct iwl4965_scale_tbl_info *tbl;
-	int i;
-	int active_tbl;
-	int flush_interval_passed = 0;
-	struct iwl_priv *priv;
-
-	priv = lq_sta->drv;
-	active_tbl = lq_sta->active_tbl;
-
-	tbl = &(lq_sta->lq_info[active_tbl]);
-
-	/* If we've been disallowing search, see if we should now allow it */
-	if (lq_sta->stay_in_tbl) {
-
-		/* Elapsed time using current modulation mode */
-		if (lq_sta->flush_timer)
-			flush_interval_passed =
-			    time_after(jiffies,
-				       (unsigned long)(lq_sta->flush_timer +
-					IWL_RATE_SCALE_FLUSH_INTVL));
-
-		/*
-		 * Check if we should allow search for new modulation mode.
-		 * If many frames have failed or succeeded, or we've used
-		 * this same modulation for a long time, allow search, and
-		 * reset history stats that keep track of whether we should
-		 * allow a new search.  Also (below) reset all bitmaps and
-		 * stats in active history.
-		 */
-		if ((lq_sta->total_failed > lq_sta->max_failure_limit) ||
-		    (lq_sta->total_success > lq_sta->max_success_limit) ||
-		    ((!lq_sta->search_better_tbl) && (lq_sta->flush_timer)
-		     && (flush_interval_passed))) {
-			IWL_DEBUG_RATE("LQ: stay is expired %d %d %d\n:",
-				     lq_sta->total_failed,
-				     lq_sta->total_success,
-				     flush_interval_passed);
-
-			/* Allow search for new mode */
-			lq_sta->stay_in_tbl = 0;	/* only place reset */
-			lq_sta->total_failed = 0;
-			lq_sta->total_success = 0;
-			lq_sta->flush_timer = 0;
-
-		/*
-		 * Else if we've used this modulation mode enough repetitions
-		 * (regardless of elapsed time or success/failure), reset
-		 * history bitmaps and rate-specific stats for all rates in
-		 * active table.
-		 */
-		} else {
-			lq_sta->table_count++;
-			if (lq_sta->table_count >=
-			    lq_sta->table_count_limit) {
-				lq_sta->table_count = 0;
-
-				IWL_DEBUG_RATE("LQ: stay in table clear win\n");
-				for (i = 0; i < IWL_RATE_COUNT; i++)
-					rs_rate_scale_clear_window(
-						&(tbl->win[i]));
-			}
-		}
-
-		/* If transitioning to allow "search", reset all history
-		 * bitmaps and stats in active table (this will become the new
-		 * "search" table). */
-		if (!lq_sta->stay_in_tbl) {
-			for (i = 0; i < IWL_RATE_COUNT; i++)
-				rs_rate_scale_clear_window(&(tbl->win[i]));
-		}
-	}
-}
-
-/*
- * Do rate scaling and search for new modulation mode.
- */
-static void rs_rate_scale_perform(struct iwl_priv *priv,
-				  struct net_device *dev,
-				  struct ieee80211_hdr *hdr,
-				  struct sta_info *sta)
-{
-	struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr);
-	struct ieee80211_hw *hw = local_to_hw(local);
-	struct ieee80211_conf *conf = &hw->conf;
-	int low = IWL_RATE_INVALID;
-	int high = IWL_RATE_INVALID;
-	int index;
-	int i;
-	struct iwl4965_rate_scale_data *window = NULL;
-	int current_tpt = IWL_INVALID_VALUE;
-	int low_tpt = IWL_INVALID_VALUE;
-	int high_tpt = IWL_INVALID_VALUE;
-	u32 fail_count;
-	s8 scale_action = 0;
-	__le16 fc;
-	u16 rate_mask;
-	u8 update_lq = 0;
-	struct iwl4965_lq_sta *lq_sta;
-	struct iwl4965_scale_tbl_info *tbl, *tbl1;
-	u16 rate_scale_index_msk = 0;
-	u32 rate;
-	u8 is_green = 0;
-	u8 active_tbl = 0;
-	u8 done_search = 0;
-	u16 high_low;
-	s32 sr;
-	u8 tid = MAX_TID_COUNT;
-
-	IWL_DEBUG_RATE("rate scale calculate new rate for skb\n");
-
-	fc = hdr->frame_control;
-	if (!ieee80211_is_data(fc) || is_multicast_ether_addr(hdr->addr1)) {
-		/* Send management frames and broadcast/multicast data using
-		 * lowest rate. */
-		/* TODO: this could probably be improved.. */
-		return;
-	}
-
-	if (!sta || !sta->rate_ctrl_priv)
-		return;
-
-	lq_sta = (struct iwl4965_lq_sta *)sta->rate_ctrl_priv;
-
-	tid = rs_tl_add_packet(lq_sta, hdr);
-
-	/*
-	 * Select rate-scale / modulation-mode table to work with in
-	 * the rest of this function:  "search" if searching for better
-	 * modulation mode, or "active" if doing rate scaling within a mode.
-	 */
-	if (!lq_sta->search_better_tbl)
-		active_tbl = lq_sta->active_tbl;
-	else
-		active_tbl = 1 - lq_sta->active_tbl;
-
-	tbl = &(lq_sta->lq_info[active_tbl]);
-	is_green = lq_sta->is_green;
-
-	/* current tx rate */
-	index = sta->last_txrate_idx;
-
-	IWL_DEBUG_RATE("Rate scale index %d for type %d\n", index,
-		       tbl->lq_type);
-
-	/* rates available for this association, and for modulation mode */
-	rate_mask = rs_get_supported_rates(lq_sta, hdr, tbl->lq_type);
-
-	IWL_DEBUG_RATE("mask 0x%04X \n", rate_mask);
-
-	/* mask with station rate restriction */
-	if (is_legacy(tbl->lq_type)) {
-		if (lq_sta->band == IEEE80211_BAND_5GHZ)
-			/* supp_rates has no CCK bits in A mode */
-			rate_scale_index_msk = (u16) (rate_mask &
-				(lq_sta->supp_rates << IWL_FIRST_OFDM_RATE));
-		else
-			rate_scale_index_msk = (u16) (rate_mask &
-						      lq_sta->supp_rates);
-
-	} else
-		rate_scale_index_msk = rate_mask;
-
-	if (!rate_scale_index_msk)
-		rate_scale_index_msk = rate_mask;
-
-	if (!((1 << index) & rate_scale_index_msk)) {
-		IWL_ERROR("Current Rate is not valid\n");
-		return;
-	}
-
-	/* Get expected throughput table and history window for current rate */
-	if (!tbl->expected_tpt) {
-		IWL_ERROR("tbl->expected_tpt is NULL\n");
-		return;
-	}
-
-	window = &(tbl->win[index]);
-
-	/*
-	 * If there is not enough history to calculate actual average
-	 * throughput, keep analyzing results of more tx frames, without
-	 * changing rate or mode (bypass most of the rest of this function).
-	 * Set up new rate table in uCode only if old rate is not supported
-	 * in current association (use new rate found above).
-	 */
-	fail_count = window->counter - window->success_counter;
-	if ((fail_count < IWL_RATE_MIN_FAILURE_TH) &&
-			(window->success_counter < IWL_RATE_MIN_SUCCESS_TH)) {
-		IWL_DEBUG_RATE("LQ: still below TH. succ=%d total=%d "
-			       "for index %d\n",
-			       window->success_counter, window->counter, index);
-
-		/* Can't calculate this yet; not enough history */
-		window->average_tpt = IWL_INVALID_VALUE;
-
-		/* Should we stay with this modulation mode,
-		 * or search for a new one? */
-		rs_stay_in_table(lq_sta);
-
-		goto out;
-
-	/* Else we have enough samples; calculate estimate of
-	 * actual average throughput */
-	} else {
-		/*FIXME:RS remove this else if we don't get this error*/
-		if (window->average_tpt != ((window->success_ratio *
-				tbl->expected_tpt[index] + 64) / 128)) {
-			IWL_ERROR("expected_tpt should have been calculated"
-								" by now\n");
-			window->average_tpt = ((window->success_ratio *
-					tbl->expected_tpt[index] + 64) / 128);
-		}
-	}
-
-	/* If we are searching for better modulation mode, check success. */
-	if (lq_sta->search_better_tbl) {
-
-		/* If good success, continue using the "search" mode;
-		 * no need to send new link quality command, since we're
-		 * continuing to use the setup that we've been trying. */
-		if (window->average_tpt > lq_sta->last_tpt) {
-
-			IWL_DEBUG_RATE("LQ: SWITCHING TO CURRENT TABLE "
-					"suc=%d cur-tpt=%d old-tpt=%d\n",
-					window->success_ratio,
-					window->average_tpt,
-					lq_sta->last_tpt);
-
-			if (!is_legacy(tbl->lq_type))
-				lq_sta->enable_counter = 1;
-
-			/* Swap tables; "search" becomes "active" */
-			lq_sta->active_tbl = active_tbl;
-			current_tpt = window->average_tpt;
-
-		/* Else poor success; go back to mode in "active" table */
-		} else {
-
-			IWL_DEBUG_RATE("LQ: GOING BACK TO THE OLD TABLE "
-					"suc=%d cur-tpt=%d old-tpt=%d\n",
-					window->success_ratio,
-					window->average_tpt,
-					lq_sta->last_tpt);
-
-			/* Nullify "search" table */
-			tbl->lq_type = LQ_NONE;
-
-			/* Revert to "active" table */
-			active_tbl = lq_sta->active_tbl;
-			tbl = &(lq_sta->lq_info[active_tbl]);
-
-			/* Revert to "active" rate and throughput info */
-			index = iwl_hwrate_to_plcp_idx(tbl->current_rate);
-			current_tpt = lq_sta->last_tpt;
-
-			/* Need to set up a new rate table in uCode */
-			update_lq = 1;
-		}
-
-		/* Either way, we've made a decision; modulation mode
-		 * search is done, allow rate adjustment next time. */
-		lq_sta->search_better_tbl = 0;
-		done_search = 1;	/* Don't switch modes below! */
-		goto lq_update;
-	}
-
-	/* (Else) not in search of better modulation mode, try for better
-	 * starting rate, while staying in this mode. */
-	high_low = rs_get_adjacent_rate(priv, index, rate_scale_index_msk,
-					tbl->lq_type);
-	low = high_low & 0xff;
-	high = (high_low >> 8) & 0xff;
-
-	sr = window->success_ratio;
-
-	/* Collect measured throughputs for current and adjacent rates */
-	current_tpt = window->average_tpt;
-	if (low != IWL_RATE_INVALID)
-		low_tpt = tbl->win[low].average_tpt;
-	if (high != IWL_RATE_INVALID)
-		high_tpt = tbl->win[high].average_tpt;
-
-	scale_action = 0;
-
-	/* Too many failures, decrease rate */
-	if ((sr <= IWL_RATE_DECREASE_TH) || (current_tpt == 0)) {
-		IWL_DEBUG_RATE("decrease rate because of low success_ratio\n");
-		scale_action = -1;
-
-	/* No throughput measured yet for adjacent rates; try increase. */
-	} else if ((low_tpt == IWL_INVALID_VALUE) &&
-		   (high_tpt == IWL_INVALID_VALUE)) {
-
-		if (high != IWL_RATE_INVALID && sr >= IWL_RATE_INCREASE_TH)
-			scale_action = 1;
-		else if (low != IWL_RATE_INVALID)
-			scale_action = -1;
-	}
-
-	/* Both adjacent throughputs are measured, but neither one has better
-	 * throughput; we're using the best rate, don't change it! */
-	else if ((low_tpt != IWL_INVALID_VALUE) &&
-		 (high_tpt != IWL_INVALID_VALUE) &&
-		 (low_tpt < current_tpt) &&
-		 (high_tpt < current_tpt))
-		scale_action = 0;
-
-	/* At least one adjacent rate's throughput is measured,
-	 * and may have better performance. */
-	else {
-		/* Higher adjacent rate's throughput is measured */
-		if (high_tpt != IWL_INVALID_VALUE) {
-			/* Higher rate has better throughput */
-			if (high_tpt > current_tpt &&
-					sr >= IWL_RATE_INCREASE_TH) {
-				scale_action = 1;
-			} else {
-				IWL_DEBUG_RATE
-				    ("decrease rate because of high tpt\n");
-				scale_action = -1;
-			}
-
-		/* Lower adjacent rate's throughput is measured */
-		} else if (low_tpt != IWL_INVALID_VALUE) {
-			/* Lower rate has better throughput */
-			if (low_tpt > current_tpt) {
-				IWL_DEBUG_RATE
-				    ("decrease rate because of low tpt\n");
-				scale_action = -1;
-			} else if (sr >= IWL_RATE_INCREASE_TH) {
-				scale_action = 1;
-			}
-		}
-	}
-
-	/* Sanity check; asked for decrease, but success rate or throughput
-	 * has been good at old rate.  Don't change it. */
-	if ((scale_action == -1) && (low != IWL_RATE_INVALID) &&
-		    ((sr > IWL_RATE_HIGH_TH) ||
-		     (current_tpt > (100 * tbl->expected_tpt[low]))))
-		scale_action = 0;
-
-	switch (scale_action) {
-	case -1:
-		/* Decrease starting rate, update uCode's rate table */
-		if (low != IWL_RATE_INVALID) {
-			update_lq = 1;
-			index = low;
-		}
-		break;
-	case 1:
-		/* Increase starting rate, update uCode's rate table */
-		if (high != IWL_RATE_INVALID) {
-			update_lq = 1;
-			index = high;
-		}
-
-		break;
-	case 0:
-		/* No change */
-	default:
-		break;
-	}
-
-	IWL_DEBUG_RATE("choose rate scale index %d action %d low %d "
-		    "high %d type %d\n",
-		     index, scale_action, low, high, tbl->lq_type);
-
-lq_update:
-	/* Replace uCode's rate table for the destination station. */
-	if (update_lq) {
-		rate = rate_n_flags_from_tbl(tbl, index, is_green);
-		rs_fill_link_cmd(priv, lq_sta, rate);
-		iwl_send_lq_cmd(priv, &lq_sta->lq, CMD_ASYNC);
-	}
-
-	/* Should we stay with this modulation mode, or search for a new one? */
-	rs_stay_in_table(lq_sta);
-
-	/*
-	 * Search for new modulation mode if we're:
-	 * 1)  Not changing rates right now
-	 * 2)  Not just finishing up a search
-	 * 3)  Allowing a new search
-	 */
-	if (!update_lq && !done_search && !lq_sta->stay_in_tbl && window->counter) {
-		/* Save current throughput to compare with "search" throughput*/
-		lq_sta->last_tpt = current_tpt;
-
-		/* Select a new "search" modulation mode to try.
-		 * If one is found, set up the new "search" table. */
-		if (is_legacy(tbl->lq_type))
-			rs_move_legacy_other(priv, lq_sta, conf, sta, index);
-		else if (is_siso(tbl->lq_type))
-			rs_move_siso_to_other(priv, lq_sta, conf, sta, index);
-		else
-			rs_move_mimo_to_other(priv, lq_sta, conf, sta, index);
-
-		/* If new "search" mode was selected, set up in uCode table */
-		if (lq_sta->search_better_tbl) {
-			/* Access the "search" table, clear its history. */
-			tbl = &(lq_sta->lq_info[(1 - lq_sta->active_tbl)]);
-			for (i = 0; i < IWL_RATE_COUNT; i++)
-				rs_rate_scale_clear_window(&(tbl->win[i]));
-
-			/* Use new "search" start rate */
-			index = iwl_hwrate_to_plcp_idx(tbl->current_rate);
-
-			IWL_DEBUG_RATE("Switch current  mcs: %X index: %d\n",
-				     tbl->current_rate, index);
-			rs_fill_link_cmd(priv, lq_sta, tbl->current_rate);
-			iwl_send_lq_cmd(priv, &lq_sta->lq, CMD_ASYNC);
-		}
-
-		/* If the "active" (non-search) mode was legacy,
-		 * and we've tried switching antennas,
-		 * but we haven't been able to try HT modes (not available),
-		 * stay with best antenna legacy modulation for a while
-		 * before next round of mode comparisons. */
-		tbl1 = &(lq_sta->lq_info[lq_sta->active_tbl]);
-		if (is_legacy(tbl1->lq_type) &&
-		   (!(conf->flags & IEEE80211_CONF_SUPPORT_HT_MODE)) &&
-		    (lq_sta->action_counter >= 1)) {
-			lq_sta->action_counter = 0;
-			IWL_DEBUG_RATE("LQ: STAY in legacy table\n");
-			rs_set_stay_in_table(priv, 1, lq_sta);
-		}
-
-		/* If we're in an HT mode, and all 3 mode switch actions
-		 * have been tried and compared, stay in this best modulation
-		 * mode for a while before next round of mode comparisons. */
-		if (lq_sta->enable_counter &&
-		    (lq_sta->action_counter >= IWL_ACTION_LIMIT)) {
-			if ((lq_sta->last_tpt > IWL_AGG_TPT_THREHOLD) &&
-			    (lq_sta->tx_agg_tid_en & (1 << tid)) &&
-			    (tid != MAX_TID_COUNT)) {
-				IWL_DEBUG_RATE("try to aggregate tid %d\n", tid);
-				rs_tl_turn_on_agg(priv, tid, lq_sta, sta);
-			}
-			lq_sta->action_counter = 0;
-			rs_set_stay_in_table(priv, 0, lq_sta);
-		}
-
-	/*
-	 * Else, don't search for a new modulation mode.
-	 * Put new timestamp in stay-in-modulation-mode flush timer if:
-	 * 1)  Not changing rates right now
-	 * 2)  Not just finishing up a search
-	 * 3)  flush timer is empty
-	 */
-	} else {
-		if ((!update_lq) && (!done_search) && (!lq_sta->flush_timer))
-			lq_sta->flush_timer = jiffies;
-	}
-
-out:
-	tbl->current_rate = rate_n_flags_from_tbl(tbl, index, is_green);
-	i = index;
-	sta->last_txrate_idx = i;
-
-	/* sta->txrate_idx is an index to A mode rates which start
-	 * at IWL_FIRST_OFDM_RATE
-	 */
-	if (lq_sta->band == IEEE80211_BAND_5GHZ)
-		sta->txrate_idx = i - IWL_FIRST_OFDM_RATE;
-	else
-		sta->txrate_idx = i;
-
-	return;
-}
-
-
-static void rs_initialize_lq(struct iwl_priv *priv,
-			     struct ieee80211_conf *conf,
-			     struct sta_info *sta)
-{
-	struct iwl4965_lq_sta *lq_sta;
-	struct iwl4965_scale_tbl_info *tbl;
-	int rate_idx;
-	int i;
-	u32 rate;
-	u8 use_green = rs_use_green(priv, conf);
-	u8 active_tbl = 0;
-	u8 valid_tx_ant;
-
-	if (!sta || !sta->rate_ctrl_priv)
-		goto out;
-
-	lq_sta = (struct iwl4965_lq_sta *)sta->rate_ctrl_priv;
-	i = sta->last_txrate_idx;
-
-	if ((lq_sta->lq.sta_id == 0xff) &&
-	    (priv->iw_mode == IEEE80211_IF_TYPE_IBSS))
-		goto out;
-
-	valid_tx_ant = priv->hw_params.valid_tx_ant;
-
-	if (!lq_sta->search_better_tbl)
-		active_tbl = lq_sta->active_tbl;
-	else
-		active_tbl = 1 - lq_sta->active_tbl;
-
-	tbl = &(lq_sta->lq_info[active_tbl]);
-
-	if ((i < 0) || (i >= IWL_RATE_COUNT))
-		i = 0;
-
-	/* FIXME:RS: This is also wrong in 4965 */
-	rate = iwl_rates[i].plcp;
-	rate |= RATE_MCS_ANT_B_MSK;
-	rate &= ~RATE_MCS_ANT_A_MSK;
-
-	if (i >= IWL_FIRST_CCK_RATE && i <= IWL_LAST_CCK_RATE)
-		rate |= RATE_MCS_CCK_MSK;
-
-	tbl->ant_type = ANT_B;
-	rs_get_tbl_info_from_mcs(rate, priv->band, tbl, &rate_idx);
-	if (!rs_is_valid_ant(valid_tx_ant, tbl->ant_type))
-	    rs_toggle_antenna(valid_tx_ant, &rate, tbl);
-
-	rate = rate_n_flags_from_tbl(tbl, rate_idx, use_green);
-	tbl->current_rate = rate;
-	rs_set_expected_tpt_table(lq_sta, tbl);
-	rs_fill_link_cmd(NULL, lq_sta, rate);
-	iwl_send_lq_cmd(priv, &lq_sta->lq, CMD_ASYNC);
- out:
-	return;
-}
-
-static void rs_get_rate(void *priv_rate, struct net_device *dev,
-			struct ieee80211_supported_band *sband,
-			struct sk_buff *skb,
-			struct rate_selection *sel)
-{
-
-	int i;
-	struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr);
-	struct ieee80211_conf *conf = &local->hw.conf;
-	struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data;
-	struct sta_info *sta;
-	__le16 fc;
-	struct iwl_priv *priv = (struct iwl_priv *)priv_rate;
-	struct iwl4965_lq_sta *lq_sta;
-
-	IWL_DEBUG_RATE_LIMIT("rate scale calculate new rate for skb\n");
-
-	rcu_read_lock();
-
-	sta = sta_info_get(local, hdr->addr1);
-
-	/* Send management frames and broadcast/multicast data using lowest
-	 * rate. */
-	fc = hdr->frame_control;
-	if (!ieee80211_is_data(fc) || is_multicast_ether_addr(hdr->addr1) ||
-	    !sta || !sta->rate_ctrl_priv) {
-		sel->rate_idx = rate_lowest_index(local, sband, sta);
-		goto out;
-	}
-
-	lq_sta = (struct iwl4965_lq_sta *)sta->rate_ctrl_priv;
-	i = sta->last_txrate_idx;
-
-	if ((priv->iw_mode == IEEE80211_IF_TYPE_IBSS) &&
-	    !lq_sta->ibss_sta_added) {
-		u8 sta_id = iwl_find_station(priv, hdr->addr1);
-		DECLARE_MAC_BUF(mac);
-
-		if (sta_id == IWL_INVALID_STATION) {
-			IWL_DEBUG_RATE("LQ: ADD station %s\n",
-				       print_mac(mac, hdr->addr1));
-			sta_id = iwl_add_station_flags(priv, hdr->addr1,
-							0, CMD_ASYNC, NULL);
-		}
-		if ((sta_id != IWL_INVALID_STATION)) {
-			lq_sta->lq.sta_id = sta_id;
-			lq_sta->lq.rs_table[0].rate_n_flags = 0;
-			lq_sta->ibss_sta_added = 1;
-			rs_initialize_lq(priv, conf, sta);
-		}
-	}
-
-	if ((i < 0) || (i > IWL_RATE_COUNT)) {
-		sel->rate_idx = rate_lowest_index(local, sband, sta);
-		goto out;
-	}
-
-	if (sband->band == IEEE80211_BAND_5GHZ)
-		i -= IWL_FIRST_OFDM_RATE;
-	sel->rate_idx = i;
-out:
-	rcu_read_unlock();
-}
-
-static void *rs_alloc_sta(void *priv_rate, gfp_t gfp)
-{
-	struct iwl4965_lq_sta *lq_sta;
-	struct iwl_priv *priv;
-	int i, j;
-
-	priv = (struct iwl_priv *)priv_rate;
-	IWL_DEBUG_RATE("create station rate scale window\n");
-
-	lq_sta = kzalloc(sizeof(struct iwl4965_lq_sta), gfp);
-
-	if (lq_sta == NULL)
-		return NULL;
-	lq_sta->lq.sta_id = 0xff;
-
-
-	for (j = 0; j < LQ_SIZE; j++)
-		for (i = 0; i < IWL_RATE_COUNT; i++)
-			rs_rate_scale_clear_window(&(lq_sta->lq_info[j].win[i]));
-
-	return lq_sta;
-}
-
-static void rs_rate_init(void *priv_rate, void *priv_sta,
-			 struct ieee80211_local *local,
-			 struct sta_info *sta)
-{
-	int i, j;
-	struct ieee80211_conf *conf = &local->hw.conf;
-	struct ieee80211_supported_band *sband;
-	struct iwl_priv *priv = (struct iwl_priv *)priv_rate;
-	struct iwl4965_lq_sta *lq_sta = priv_sta;
-
-	sband = local->hw.wiphy->bands[local->hw.conf.channel->band];
-
-	lq_sta->flush_timer = 0;
-	lq_sta->supp_rates = sta->supp_rates[sband->band];
-	sta->txrate_idx = 3;
-	for (j = 0; j < LQ_SIZE; j++)
-		for (i = 0; i < IWL_RATE_COUNT; i++)
-			rs_rate_scale_clear_window(&(lq_sta->lq_info[j].win[i]));
-
-	IWL_DEBUG_RATE("LQ: *** rate scale global init ***\n");
-	/* TODO: what is a good starting rate for STA? About middle? Maybe not
-	 * the lowest or the highest rate.. Could consider using RSSI from
-	 * previous packets? Need to have IEEE 802.1X auth succeed immediately
-	 * after assoc.. */
-
-	lq_sta->ibss_sta_added = 0;
-	if (priv->iw_mode == IEEE80211_IF_TYPE_AP) {
-		u8 sta_id = iwl_find_station(priv, sta->addr);
-		DECLARE_MAC_BUF(mac);
-
-		/* for IBSS the call are from tasklet */
-		IWL_DEBUG_RATE("LQ: ADD station %s\n",
-			     print_mac(mac, sta->addr));
-
-		if (sta_id == IWL_INVALID_STATION) {
-			IWL_DEBUG_RATE("LQ: ADD station %s\n",
-				       print_mac(mac, sta->addr));
-			sta_id = iwl_add_station_flags(priv, sta->addr,
-							0, CMD_ASYNC, NULL);
-		}
-		if ((sta_id != IWL_INVALID_STATION)) {
-			lq_sta->lq.sta_id = sta_id;
-			lq_sta->lq.rs_table[0].rate_n_flags = 0;
-		}
-		/* FIXME: this is w/a remove it later */
-		priv->assoc_station_added = 1;
-	}
-
-	/* Find highest tx rate supported by hardware and destination station */
-	for (i = 0; i < sband->n_bitrates; i++)
-		if (sta->supp_rates[sband->band] & BIT(i))
-			sta->txrate_idx = i;
-
-	sta->last_txrate_idx = sta->txrate_idx;
-	/* WTF is with this bogus comment? A doesn't have cck rates */
-	/* For MODE_IEEE80211A, cck rates are at end of rate table */
-	if (local->hw.conf.channel->band == IEEE80211_BAND_5GHZ)
-		sta->last_txrate_idx += IWL_FIRST_OFDM_RATE;
-
-	lq_sta->is_dup = 0;
-	lq_sta->is_green = rs_use_green(priv, conf);
-	lq_sta->active_legacy_rate = priv->active_rate & ~(0x1000);
-	lq_sta->active_rate_basic = priv->active_rate_basic;
-	lq_sta->band = priv->band;
-	/*
-	 * active_siso_rate mask includes 9 MBits (bit 5), and CCK (bits 0-3),
-	 * supp_rates[] does not; shift to convert format, force 9 MBits off.
-	 */
-	lq_sta->active_siso_rate = conf->ht_conf.supp_mcs_set[0] << 1;
-	lq_sta->active_siso_rate |= conf->ht_conf.supp_mcs_set[0] & 0x1;
-	lq_sta->active_siso_rate &= ~((u16)0x2);
-	lq_sta->active_siso_rate <<= IWL_FIRST_OFDM_RATE;
-
-	/* Same here */
-	lq_sta->active_mimo2_rate = conf->ht_conf.supp_mcs_set[1] << 1;
-	lq_sta->active_mimo2_rate |= conf->ht_conf.supp_mcs_set[1] & 0x1;
-	lq_sta->active_mimo2_rate &= ~((u16)0x2);
-	lq_sta->active_mimo2_rate <<= IWL_FIRST_OFDM_RATE;
-
-	lq_sta->active_mimo3_rate = conf->ht_conf.supp_mcs_set[2] << 1;
-	lq_sta->active_mimo3_rate |= conf->ht_conf.supp_mcs_set[2] & 0x1;
-	lq_sta->active_mimo3_rate &= ~((u16)0x2);
-	lq_sta->active_mimo3_rate <<= IWL_FIRST_OFDM_RATE;
-
-	IWL_DEBUG_RATE("SISO-RATE=%X MIMO2-RATE=%X MIMO3-RATE=%X\n",
-		     lq_sta->active_siso_rate,
-		     lq_sta->active_mimo2_rate,
-		     lq_sta->active_mimo3_rate);
-
-	/* These values will be overriden later */
-	lq_sta->lq.general_params.single_stream_ant_msk = ANT_A;
-	lq_sta->lq.general_params.dual_stream_ant_msk = ANT_AB;
-
-	/* as default allow aggregation for all tids */
-	lq_sta->tx_agg_tid_en = IWL_AGG_ALL_TID;
-	lq_sta->drv = priv;
-
-	rs_initialize_lq(priv, conf, sta);
-}
-
-static void rs_fill_link_cmd(const struct iwl_priv *priv,
-			     struct iwl4965_lq_sta *lq_sta,
-			     u32 new_rate)
-{
-	struct iwl4965_scale_tbl_info tbl_type;
-	int index = 0;
-	int rate_idx;
-	int repeat_rate = 0;
-	u8 ant_toggle_cnt = 0;
-	u8 use_ht_possible = 1;
-	u8 valid_tx_ant = 0;
-	struct iwl_link_quality_cmd *lq_cmd = &lq_sta->lq;
-
-	/* Override starting rate (index 0) if needed for debug purposes */
-	rs_dbgfs_set_mcs(lq_sta, &new_rate, index);
-
-	/* Interpret new_rate (rate_n_flags) */
-	memset(&tbl_type, 0, sizeof(tbl_type));
-	rs_get_tbl_info_from_mcs(new_rate, lq_sta->band,
-				  &tbl_type, &rate_idx);
-
-	/* How many times should we repeat the initial rate? */
-	if (is_legacy(tbl_type.lq_type)) {
-		ant_toggle_cnt = 1;
-		repeat_rate = IWL_NUMBER_TRY;
-	} else {
-		repeat_rate = IWL_HT_NUMBER_TRY;
-	}
-
-	lq_cmd->general_params.mimo_delimiter =
-			is_mimo(tbl_type.lq_type) ? 1 : 0;
-
-	/* Fill 1st table entry (index 0) */
-	lq_cmd->rs_table[index].rate_n_flags = cpu_to_le32(new_rate);
-
-	if (num_of_ant(tbl_type.ant_type) == 1) {
-		lq_cmd->general_params.single_stream_ant_msk =
-						tbl_type.ant_type;
-	} else if (num_of_ant(tbl_type.ant_type) == 2) {
-		lq_cmd->general_params.dual_stream_ant_msk =
-						tbl_type.ant_type;
-	} /* otherwise we don't modify the existing value */
-
-	index++;
-	repeat_rate--;
-
-	if (priv)
-		valid_tx_ant = priv->hw_params.valid_tx_ant;
-
-	/* Fill rest of rate table */
-	while (index < LINK_QUAL_MAX_RETRY_NUM) {
-		/* Repeat initial/next rate.
-		 * For legacy IWL_NUMBER_TRY == 1, this loop will not execute.
-		 * For HT IWL_HT_NUMBER_TRY == 3, this executes twice. */
-		while (repeat_rate > 0 && (index < LINK_QUAL_MAX_RETRY_NUM)) {
-			if (is_legacy(tbl_type.lq_type)) {
-				if (ant_toggle_cnt < NUM_TRY_BEFORE_ANT_TOGGLE)
-					ant_toggle_cnt++;
-				else if (priv &&
-					 rs_toggle_antenna(valid_tx_ant,
-							&new_rate, &tbl_type))
-					ant_toggle_cnt = 1;
-}
-
-			/* Override next rate if needed for debug purposes */
-			rs_dbgfs_set_mcs(lq_sta, &new_rate, index);
-
-			/* Fill next table entry */
-			lq_cmd->rs_table[index].rate_n_flags =
-					cpu_to_le32(new_rate);
-			repeat_rate--;
-			index++;
-		}
-
-		rs_get_tbl_info_from_mcs(new_rate, lq_sta->band, &tbl_type,
-						&rate_idx);
-
-		/* Indicate to uCode which entries might be MIMO.
-		 * If initial rate was MIMO, this will finally end up
-		 * as (IWL_HT_NUMBER_TRY * 2), after 2nd pass, otherwise 0. */
-		if (is_mimo(tbl_type.lq_type))
-			lq_cmd->general_params.mimo_delimiter = index;
-
-		/* Get next rate */
-		new_rate = rs_get_lower_rate(lq_sta, &tbl_type, rate_idx,
-					     use_ht_possible);
-
-		/* How many times should we repeat the next rate? */
-		if (is_legacy(tbl_type.lq_type)) {
-			if (ant_toggle_cnt < NUM_TRY_BEFORE_ANT_TOGGLE)
-				ant_toggle_cnt++;
-			else if (priv &&
-				 rs_toggle_antenna(valid_tx_ant,
-						   &new_rate, &tbl_type))
-				ant_toggle_cnt = 1;
-
-			repeat_rate = IWL_NUMBER_TRY;
-		} else {
-			repeat_rate = IWL_HT_NUMBER_TRY;
-		}
-
-		/* Don't allow HT rates after next pass.
-		 * rs_get_lower_rate() will change type to LQ_A or LQ_G. */
-		use_ht_possible = 0;
-
-		/* Override next rate if needed for debug purposes */
-		rs_dbgfs_set_mcs(lq_sta, &new_rate, index);
-
-		/* Fill next table entry */
-		lq_cmd->rs_table[index].rate_n_flags = cpu_to_le32(new_rate);
-
-		index++;
-		repeat_rate--;
-	}
-
-	lq_cmd->agg_params.agg_frame_cnt_limit = 64;
-	lq_cmd->agg_params.agg_dis_start_th = 3;
-	lq_cmd->agg_params.agg_time_limit = cpu_to_le16(4000);
-}
-
-static void *rs_alloc(struct ieee80211_local *local)
-{
-	return local->hw.priv;
-}
-/* rate scale requires free function to be implemented */
-static void rs_free(void *priv_rate)
-{
-	return;
-}
-
-static void rs_clear(void *priv_rate)
-{
-	struct iwl_priv *priv = (struct iwl_priv *) priv_rate;
-
-	IWL_DEBUG_RATE("enter\n");
-
-	/* TODO - add rate scale state reset */
-
-	IWL_DEBUG_RATE("leave\n");
-}
-
-static void rs_free_sta(void *priv_rate, void *priv_sta)
-{
-	struct iwl4965_lq_sta *lq_sta = priv_sta;
-	struct iwl_priv *priv;
-
-	priv = (struct iwl_priv *)priv_rate;
-	IWL_DEBUG_RATE("enter\n");
-	kfree(lq_sta);
-	IWL_DEBUG_RATE("leave\n");
-}
-
-
-#ifdef CONFIG_MAC80211_DEBUGFS
-static int open_file_generic(struct inode *inode, struct file *file)
-{
-	file->private_data = inode->i_private;
-	return 0;
-}
-static void rs_dbgfs_set_mcs(struct iwl4965_lq_sta *lq_sta,
-				u32 *rate_n_flags, int index)
-{
-	struct iwl_priv *priv;
-
-	priv = lq_sta->drv;
-	if (lq_sta->dbg_fixed_rate) {
-		if (index < 12) {
-			*rate_n_flags = lq_sta->dbg_fixed_rate;
-		} else {
-			if (lq_sta->band == IEEE80211_BAND_5GHZ)
-				*rate_n_flags = 0x800D;
-			else
-				*rate_n_flags = 0x820A;
-		}
-		IWL_DEBUG_RATE("Fixed rate ON\n");
-	} else {
-		IWL_DEBUG_RATE("Fixed rate OFF\n");
-	}
-}
-
-static ssize_t rs_sta_dbgfs_scale_table_write(struct file *file,
-			const char __user *user_buf, size_t count, loff_t *ppos)
-{
-	struct iwl4965_lq_sta *lq_sta = file->private_data;
-	struct iwl_priv *priv;
-	char buf[64];
-	int buf_size;
-	u32 parsed_rate;
-
-	priv = lq_sta->drv;
-	memset(buf, 0, sizeof(buf));
-	buf_size = min(count, sizeof(buf) -  1);
-	if (copy_from_user(buf, user_buf, buf_size))
-		return -EFAULT;
-
-	if (sscanf(buf, "%x", &parsed_rate) == 1)
-		lq_sta->dbg_fixed_rate = parsed_rate;
-	else
-		lq_sta->dbg_fixed_rate = 0;
-
-	lq_sta->active_legacy_rate = 0x0FFF;	/* 1 - 54 MBits, includes CCK */
-	lq_sta->active_siso_rate   = 0x1FD0;	/* 6 - 60 MBits, no 9, no CCK */
-	lq_sta->active_mimo2_rate  = 0x1FD0;	/* 6 - 60 MBits, no 9, no CCK */
-	lq_sta->active_mimo3_rate  = 0x1FD0;	/* 6 - 60 MBits, no 9, no CCK */
-
-	IWL_DEBUG_RATE("sta_id %d rate 0x%X\n",
-		lq_sta->lq.sta_id, lq_sta->dbg_fixed_rate);
-
-	if (lq_sta->dbg_fixed_rate) {
-		rs_fill_link_cmd(NULL, lq_sta, lq_sta->dbg_fixed_rate);
-		iwl_send_lq_cmd(lq_sta->drv, &lq_sta->lq, CMD_ASYNC);
-	}
-
-	return count;
-}
-
-static ssize_t rs_sta_dbgfs_scale_table_read(struct file *file,
-			char __user *user_buf, size_t count, loff_t *ppos)
-{
-	char buff[1024];
-	int desc = 0;
-	int i = 0;
-
-	struct iwl4965_lq_sta *lq_sta = file->private_data;
-
-	desc += sprintf(buff+desc, "sta_id %d\n", lq_sta->lq.sta_id);
-	desc += sprintf(buff+desc, "failed=%d success=%d rate=0%X\n",
-			lq_sta->total_failed, lq_sta->total_success,
-			lq_sta->active_legacy_rate);
-	desc += sprintf(buff+desc, "fixed rate 0x%X\n",
-			lq_sta->dbg_fixed_rate);
-	desc += sprintf(buff+desc, "general:"
-		"flags=0x%X mimo-d=%d s-ant0x%x d-ant=0x%x\n",
-		lq_sta->lq.general_params.flags,
-		lq_sta->lq.general_params.mimo_delimiter,
-		lq_sta->lq.general_params.single_stream_ant_msk,
-		lq_sta->lq.general_params.dual_stream_ant_msk);
-
-	desc += sprintf(buff+desc, "agg:"
-			"time_limit=%d dist_start_th=%d frame_cnt_limit=%d\n",
-			le16_to_cpu(lq_sta->lq.agg_params.agg_time_limit),
-			lq_sta->lq.agg_params.agg_dis_start_th,
-			lq_sta->lq.agg_params.agg_frame_cnt_limit);
-
-	desc += sprintf(buff+desc,
-			"Start idx [0]=0x%x [1]=0x%x [2]=0x%x [3]=0x%x\n",
-			lq_sta->lq.general_params.start_rate_index[0],
-			lq_sta->lq.general_params.start_rate_index[1],
-			lq_sta->lq.general_params.start_rate_index[2],
-			lq_sta->lq.general_params.start_rate_index[3]);
-
-
-	for (i = 0; i < LINK_QUAL_MAX_RETRY_NUM; i++)
-		desc += sprintf(buff+desc, " rate[%d] 0x%X\n",
-			i, le32_to_cpu(lq_sta->lq.rs_table[i].rate_n_flags));
-
-	return simple_read_from_buffer(user_buf, count, ppos, buff, desc);
-}
-
-static const struct file_operations rs_sta_dbgfs_scale_table_ops = {
-	.write = rs_sta_dbgfs_scale_table_write,
-	.read = rs_sta_dbgfs_scale_table_read,
-	.open = open_file_generic,
-};
-static ssize_t rs_sta_dbgfs_stats_table_read(struct file *file,
-			char __user *user_buf, size_t count, loff_t *ppos)
-{
-	char buff[1024];
-	int desc = 0;
-	int i, j;
-
-	struct iwl4965_lq_sta *lq_sta = file->private_data;
-	for (i = 0; i < LQ_SIZE; i++) {
-		desc += sprintf(buff+desc, "%s type=%d SGI=%d FAT=%d DUP=%d\n"
-				"rate=0x%X\n",
-				lq_sta->active_tbl == i?"*":"x",
-				lq_sta->lq_info[i].lq_type,
-				lq_sta->lq_info[i].is_SGI,
-				lq_sta->lq_info[i].is_fat,
-				lq_sta->lq_info[i].is_dup,
-				lq_sta->lq_info[i].current_rate);
-		for (j = 0; j < IWL_RATE_COUNT; j++) {
-			desc += sprintf(buff+desc,
-				"counter=%d success=%d %%=%d\n",
-				lq_sta->lq_info[i].win[j].counter,
-				lq_sta->lq_info[i].win[j].success_counter,
-				lq_sta->lq_info[i].win[j].success_ratio);
-		}
-	}
-	return simple_read_from_buffer(user_buf, count, ppos, buff, desc);
-}
-
-static const struct file_operations rs_sta_dbgfs_stats_table_ops = {
-	.read = rs_sta_dbgfs_stats_table_read,
-	.open = open_file_generic,
-};
-
-static void rs_add_debugfs(void *priv, void *priv_sta,
-					struct dentry *dir)
-{
-	struct iwl4965_lq_sta *lq_sta = priv_sta;
-	lq_sta->rs_sta_dbgfs_scale_table_file =
-		debugfs_create_file("rate_scale_table", 0600, dir,
-				lq_sta, &rs_sta_dbgfs_scale_table_ops);
-	lq_sta->rs_sta_dbgfs_stats_table_file =
-		debugfs_create_file("rate_stats_table", 0600, dir,
-			lq_sta, &rs_sta_dbgfs_stats_table_ops);
-	lq_sta->rs_sta_dbgfs_tx_agg_tid_en_file =
-		debugfs_create_u8("tx_agg_tid_enable", 0600, dir,
-		&lq_sta->tx_agg_tid_en);
-
-}
-
-static void rs_remove_debugfs(void *priv, void *priv_sta)
-{
-	struct iwl4965_lq_sta *lq_sta = priv_sta;
-	debugfs_remove(lq_sta->rs_sta_dbgfs_scale_table_file);
-	debugfs_remove(lq_sta->rs_sta_dbgfs_stats_table_file);
-	debugfs_remove(lq_sta->rs_sta_dbgfs_tx_agg_tid_en_file);
-}
-#endif
-
-static struct rate_control_ops rs_ops = {
-	.module = NULL,
-	.name = RS_NAME,
-	.tx_status = rs_tx_status,
-	.get_rate = rs_get_rate,
-	.rate_init = rs_rate_init,
-	.clear = rs_clear,
-	.alloc = rs_alloc,
-	.free = rs_free,
-	.alloc_sta = rs_alloc_sta,
-	.free_sta = rs_free_sta,
-#ifdef CONFIG_MAC80211_DEBUGFS
-	.add_sta_debugfs = rs_add_debugfs,
-	.remove_sta_debugfs = rs_remove_debugfs,
-#endif
-};
-
-int iwl4965_fill_rs_info(struct ieee80211_hw *hw, char *buf, u8 sta_id)
-{
-	struct ieee80211_local *local = hw_to_local(hw);
-	struct iwl_priv *priv = hw->priv;
-	struct iwl4965_lq_sta *lq_sta;
-	struct sta_info *sta;
-	int cnt = 0, i;
-	u32 samples = 0, success = 0, good = 0;
-	unsigned long now = jiffies;
-	u32 max_time = 0;
-	u8 lq_type, antenna;
-
-	rcu_read_lock();
-
-	sta = sta_info_get(local, priv->stations[sta_id].sta.sta.addr);
-	if (!sta || !sta->rate_ctrl_priv) {
-		if (sta)
-			IWL_DEBUG_RATE("leave - no private rate data!\n");
-		else
-			IWL_DEBUG_RATE("leave - no station!\n");
-		rcu_read_unlock();
-		return sprintf(buf, "station %d not found\n", sta_id);
-	}
-
-	lq_sta = (void *)sta->rate_ctrl_priv;
-
-	lq_type = lq_sta->lq_info[lq_sta->active_tbl].lq_type;
-	antenna = lq_sta->lq_info[lq_sta->active_tbl].ant_type;
-
-	if (is_legacy(lq_type))
-		i = IWL_RATE_54M_INDEX;
-	else
-		i = IWL_RATE_60M_INDEX;
-	while (1) {
-		u64 mask;
-		int j;
-		int active = lq_sta->active_tbl;
-
-		cnt +=
-		    sprintf(&buf[cnt], " %2dMbs: ", iwl_rates[i].ieee / 2);
-
-		mask = (1ULL << (IWL_RATE_MAX_WINDOW - 1));
-		for (j = 0; j < IWL_RATE_MAX_WINDOW; j++, mask >>= 1)
-			buf[cnt++] =
-				(lq_sta->lq_info[active].win[i].data & mask)
-				? '1' : '0';
-
-		samples += lq_sta->lq_info[active].win[i].counter;
-		good += lq_sta->lq_info[active].win[i].success_counter;
-		success += lq_sta->lq_info[active].win[i].success_counter *
-			   iwl_rates[i].ieee;
-
-		if (lq_sta->lq_info[active].win[i].stamp) {
-			int delta =
-				   jiffies_to_msecs(now -
-				   lq_sta->lq_info[active].win[i].stamp);
-
-			if (delta > max_time)
-				max_time = delta;
-
-			cnt += sprintf(&buf[cnt], "%5dms\n", delta);
-		} else
-			buf[cnt++] = '\n';
-
-		j = iwl4965_get_prev_ieee_rate(i);
-		if (j == i)
-			break;
-		i = j;
-	}
-
-	/*
-	 * Display the average rate of all samples taken.
-	 * NOTE: We multiply # of samples by 2 since the IEEE measurement
-	 * added from iwl_rates is actually 2X the rate.
-	 */
-	if (samples)
-		cnt += sprintf(&buf[cnt],
-			 "\nAverage rate is %3d.%02dMbs over last %4dms\n"
-			 "%3d%% success (%d good packets over %d tries)\n",
-			 success / (2 * samples), (success * 5 / samples) % 10,
-			 max_time, good * 100 / samples, good, samples);
-	else
-		cnt += sprintf(&buf[cnt], "\nAverage rate: 0Mbs\n");
-
-	cnt += sprintf(&buf[cnt], "\nrate scale type %d antenna %d "
-			 "active_search %d rate index %d\n", lq_type, antenna,
-			 lq_sta->search_better_tbl, sta->last_txrate_idx);
-
-	rcu_read_unlock();
-	return cnt;
-}
-
-int iwl4965_rate_control_register(void)
-{
-	return ieee80211_rate_control_register(&rs_ops);
-}
-
-void iwl4965_rate_control_unregister(void)
-{
-	ieee80211_rate_control_unregister(&rs_ops);
-}
-
diff --git a/drivers/net/wireless/iwlwifi/iwl-4965-rs.h b/drivers/net/wireless/iwlwifi/iwl-4965-rs.h
deleted file mode 100644
index 9b9972885aa5..000000000000
--- a/drivers/net/wireless/iwlwifi/iwl-4965-rs.h
+++ /dev/null
@@ -1,318 +0,0 @@
-/******************************************************************************
- *
- * Copyright(c) 2003 - 2008 Intel Corporation. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of version 2 of the GNU General Public License as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * this program; if not, write to the Free Software Foundation, Inc.,
- * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
- *
- * The full GNU General Public License is included in this distribution in the
- * file called LICENSE.
- *
- * Contact Information:
- * James P. Ketrenos <ipw2100-admin@linux.intel.com>
- * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
- *
- *****************************************************************************/
-
-#ifndef __iwl_4965_rs_h__
-#define __iwl_4965_rs_h__
-
-#include "iwl-dev.h"
-
-struct iwl_rate_info {
-	u8 plcp;	/* uCode API:  IWL_RATE_6M_PLCP, etc. */
-	u8 plcp_siso;	/* uCode API:  IWL_RATE_SISO_6M_PLCP, etc. */
-	u8 plcp_mimo2;	/* uCode API:  IWL_RATE_MIMO2_6M_PLCP, etc. */
-	u8 plcp_mimo3;  /* uCode API:  IWL_RATE_MIMO3_6M_PLCP, etc. */
-	u8 ieee;	/* MAC header:  IWL_RATE_6M_IEEE, etc. */
-	u8 prev_ieee;    /* previous rate in IEEE speeds */
-	u8 next_ieee;    /* next rate in IEEE speeds */
-	u8 prev_rs;      /* previous rate used in rs algo */
-	u8 next_rs;      /* next rate used in rs algo */
-	u8 prev_rs_tgg;  /* previous rate used in TGG rs algo */
-	u8 next_rs_tgg;  /* next rate used in TGG rs algo */
-};
-
-/*
- * These serve as indexes into
- * struct iwl_rate_info iwl_rates[IWL_RATE_COUNT];
- */
-enum {
-	IWL_RATE_1M_INDEX = 0,
-	IWL_RATE_2M_INDEX,
-	IWL_RATE_5M_INDEX,
-	IWL_RATE_11M_INDEX,
-	IWL_RATE_6M_INDEX,
-	IWL_RATE_9M_INDEX,
-	IWL_RATE_12M_INDEX,
-	IWL_RATE_18M_INDEX,
-	IWL_RATE_24M_INDEX,
-	IWL_RATE_36M_INDEX,
-	IWL_RATE_48M_INDEX,
-	IWL_RATE_54M_INDEX,
-	IWL_RATE_60M_INDEX,
-	IWL_RATE_COUNT, /*FIXME:RS:change to IWL_RATE_INDEX_COUNT,*/
-	IWL_RATE_INVM_INDEX = IWL_RATE_COUNT,
-	IWL_RATE_INVALID = IWL_RATE_COUNT,
-};
-
-enum {
-	IWL_FIRST_OFDM_RATE = IWL_RATE_6M_INDEX,
-	IWL_LAST_OFDM_RATE = IWL_RATE_60M_INDEX,
-	IWL_FIRST_CCK_RATE = IWL_RATE_1M_INDEX,
-	IWL_LAST_CCK_RATE = IWL_RATE_11M_INDEX,
-};
-
-/* #define vs. enum to keep from defaulting to 'large integer' */
-#define	IWL_RATE_6M_MASK   (1 << IWL_RATE_6M_INDEX)
-#define	IWL_RATE_9M_MASK   (1 << IWL_RATE_9M_INDEX)
-#define	IWL_RATE_12M_MASK  (1 << IWL_RATE_12M_INDEX)
-#define	IWL_RATE_18M_MASK  (1 << IWL_RATE_18M_INDEX)
-#define	IWL_RATE_24M_MASK  (1 << IWL_RATE_24M_INDEX)
-#define	IWL_RATE_36M_MASK  (1 << IWL_RATE_36M_INDEX)
-#define	IWL_RATE_48M_MASK  (1 << IWL_RATE_48M_INDEX)
-#define	IWL_RATE_54M_MASK  (1 << IWL_RATE_54M_INDEX)
-#define IWL_RATE_60M_MASK  (1 << IWL_RATE_60M_INDEX)
-#define	IWL_RATE_1M_MASK   (1 << IWL_RATE_1M_INDEX)
-#define	IWL_RATE_2M_MASK   (1 << IWL_RATE_2M_INDEX)
-#define	IWL_RATE_5M_MASK   (1 << IWL_RATE_5M_INDEX)
-#define	IWL_RATE_11M_MASK  (1 << IWL_RATE_11M_INDEX)
-
-/* 4965 uCode API values for legacy bit rates, both OFDM and CCK */
-enum {
-	IWL_RATE_6M_PLCP  = 13,
-	IWL_RATE_9M_PLCP  = 15,
-	IWL_RATE_12M_PLCP = 5,
-	IWL_RATE_18M_PLCP = 7,
-	IWL_RATE_24M_PLCP = 9,
-	IWL_RATE_36M_PLCP = 11,
-	IWL_RATE_48M_PLCP = 1,
-	IWL_RATE_54M_PLCP = 3,
-	IWL_RATE_60M_PLCP = 3,/*FIXME:RS:should be removed*/
-	IWL_RATE_1M_PLCP  = 10,
-	IWL_RATE_2M_PLCP  = 20,
-	IWL_RATE_5M_PLCP  = 55,
-	IWL_RATE_11M_PLCP = 110,
-	/*FIXME:RS:change to IWL_RATE_LEGACY_??M_PLCP */
-	/*FIXME:RS:add IWL_RATE_LEGACY_INVM_PLCP = 0,*/
-};
-
-/* 4965 uCode API values for OFDM high-throughput (HT) bit rates */
-enum {
-	IWL_RATE_SISO_6M_PLCP = 0,
-	IWL_RATE_SISO_12M_PLCP = 1,
-	IWL_RATE_SISO_18M_PLCP = 2,
-	IWL_RATE_SISO_24M_PLCP = 3,
-	IWL_RATE_SISO_36M_PLCP = 4,
-	IWL_RATE_SISO_48M_PLCP = 5,
-	IWL_RATE_SISO_54M_PLCP = 6,
-	IWL_RATE_SISO_60M_PLCP = 7,
-	IWL_RATE_MIMO2_6M_PLCP  = 0x8,
-	IWL_RATE_MIMO2_12M_PLCP = 0x9,
-	IWL_RATE_MIMO2_18M_PLCP = 0xa,
-	IWL_RATE_MIMO2_24M_PLCP = 0xb,
-	IWL_RATE_MIMO2_36M_PLCP = 0xc,
-	IWL_RATE_MIMO2_48M_PLCP = 0xd,
-	IWL_RATE_MIMO2_54M_PLCP = 0xe,
-	IWL_RATE_MIMO2_60M_PLCP = 0xf,
-	IWL_RATE_MIMO3_6M_PLCP  = 0x10,
-	IWL_RATE_MIMO3_12M_PLCP = 0x11,
-	IWL_RATE_MIMO3_18M_PLCP = 0x12,
-	IWL_RATE_MIMO3_24M_PLCP = 0x13,
-	IWL_RATE_MIMO3_36M_PLCP = 0x14,
-	IWL_RATE_MIMO3_48M_PLCP = 0x15,
-	IWL_RATE_MIMO3_54M_PLCP = 0x16,
-	IWL_RATE_MIMO3_60M_PLCP = 0x17,
-	IWL_RATE_SISO_INVM_PLCP,
-	IWL_RATE_MIMO2_INVM_PLCP = IWL_RATE_SISO_INVM_PLCP,
-	IWL_RATE_MIMO3_INVM_PLCP = IWL_RATE_SISO_INVM_PLCP,
-};
-
-/* MAC header values for bit rates */
-enum {
-	IWL_RATE_6M_IEEE  = 12,
-	IWL_RATE_9M_IEEE  = 18,
-	IWL_RATE_12M_IEEE = 24,
-	IWL_RATE_18M_IEEE = 36,
-	IWL_RATE_24M_IEEE = 48,
-	IWL_RATE_36M_IEEE = 72,
-	IWL_RATE_48M_IEEE = 96,
-	IWL_RATE_54M_IEEE = 108,
-	IWL_RATE_60M_IEEE = 120,
-	IWL_RATE_1M_IEEE  = 2,
-	IWL_RATE_2M_IEEE  = 4,
-	IWL_RATE_5M_IEEE  = 11,
-	IWL_RATE_11M_IEEE = 22,
-};
-
-#define IWL_CCK_BASIC_RATES_MASK    \
-       (IWL_RATE_1M_MASK          | \
-	IWL_RATE_2M_MASK)
-
-#define IWL_CCK_RATES_MASK          \
-       (IWL_BASIC_RATES_MASK      | \
-	IWL_RATE_5M_MASK          | \
-	IWL_RATE_11M_MASK)
-
-#define IWL_OFDM_BASIC_RATES_MASK   \
-	(IWL_RATE_6M_MASK         | \
-	IWL_RATE_12M_MASK         | \
-	IWL_RATE_24M_MASK)
-
-#define IWL_OFDM_RATES_MASK         \
-       (IWL_OFDM_BASIC_RATES_MASK | \
-	IWL_RATE_9M_MASK          | \
-	IWL_RATE_18M_MASK         | \
-	IWL_RATE_36M_MASK         | \
-	IWL_RATE_48M_MASK         | \
-	IWL_RATE_54M_MASK)
-
-#define IWL_BASIC_RATES_MASK         \
-	(IWL_OFDM_BASIC_RATES_MASK | \
-	 IWL_CCK_BASIC_RATES_MASK)
-
-#define IWL_RATES_MASK ((1 << IWL_RATE_COUNT) - 1)
-
-#define IWL_INVALID_VALUE    -1
-
-#define IWL_MIN_RSSI_VAL                 -100
-#define IWL_MAX_RSSI_VAL                    0
-
-/* These values specify how many Tx frame attempts before
- * searching for a new modulation mode */
-#define IWL_LEGACY_FAILURE_LIMIT	160
-#define IWL_LEGACY_SUCCESS_LIMIT	480
-#define IWL_LEGACY_TABLE_COUNT		160
-
-#define IWL_NONE_LEGACY_FAILURE_LIMIT	400
-#define IWL_NONE_LEGACY_SUCCESS_LIMIT	4500
-#define IWL_NONE_LEGACY_TABLE_COUNT	1500
-
-/* Success ratio (ACKed / attempted tx frames) values (perfect is 128 * 100) */
-#define IWL_RS_GOOD_RATIO		12800	/* 100% */
-#define IWL_RATE_SCALE_SWITCH		10880	/*  85% */
-#define IWL_RATE_HIGH_TH		10880	/*  85% */
-#define IWL_RATE_INCREASE_TH            8960	/*  70% */
-#define IWL_RATE_DECREASE_TH		1920	/*  15% */
-
-/* possible actions when in legacy mode */
-#define IWL_LEGACY_SWITCH_ANTENNA	0
-#define IWL_LEGACY_SWITCH_SISO		1
-#define IWL_LEGACY_SWITCH_MIMO2		2
-
-/* possible actions when in siso mode */
-#define IWL_SISO_SWITCH_ANTENNA		0
-#define IWL_SISO_SWITCH_MIMO2		1
-#define IWL_SISO_SWITCH_GI		2
-
-/* possible actions when in mimo mode */
-#define IWL_MIMO_SWITCH_ANTENNA_A	0
-#define IWL_MIMO_SWITCH_ANTENNA_B	1
-#define IWL_MIMO_SWITCH_GI		2
-
-/*FIXME:RS:separate MIMO2/3 transitions*/
-
-/*FIXME:RS:add posible acctions for MIMO3*/
-
-#define IWL_ACTION_LIMIT		3	/* # possible actions */
-
-#define LQ_SIZE		2	/* 2 mode tables:  "Active" and "Search" */
-
-/* load per tid defines for A-MPDU activation */
-#define IWL_AGG_TPT_THREHOLD	0
-#define IWL_AGG_LOAD_THRESHOLD	10
-#define IWL_AGG_ALL_TID		0xff
-#define TID_QUEUE_CELL_SPACING	50	/*mS */
-#define TID_QUEUE_MAX_SIZE	20
-#define TID_ROUND_VALUE		5	/* mS */
-#define TID_MAX_LOAD_COUNT	8
-
-#define TID_MAX_TIME_DIFF ((TID_QUEUE_MAX_SIZE - 1) * TID_QUEUE_CELL_SPACING)
-#define TIME_WRAP_AROUND(x, y) (((y) > (x)) ? (y) - (x) : (0-(x)) + (y))
-
-extern const struct iwl_rate_info iwl_rates[IWL_RATE_COUNT];
-
-enum iwl_table_type {
-	LQ_NONE,
-	LQ_G,		/* legacy types */
-	LQ_A,
-	LQ_SISO,	/* high-throughput types */
-	LQ_MIMO2,
-	LQ_MIMO3,
-	LQ_MAX,
-};
-
-#define is_legacy(tbl) (((tbl) == LQ_G) || ((tbl) == LQ_A))
-#define is_siso(tbl) ((tbl) == LQ_SISO)
-#define is_mimo2(tbl) ((tbl) == LQ_MIMO2)
-#define is_mimo3(tbl) ((tbl) == LQ_MIMO3)
-#define is_mimo(tbl) (is_mimo2(tbl) || is_mimo3(tbl))
-#define is_Ht(tbl) (is_siso(tbl) || is_mimo(tbl))
-#define is_a_band(tbl) ((tbl) == LQ_A)
-#define is_g_and(tbl) ((tbl) == LQ_G)
-
-#define	ANT_NONE	0x0
-#define	ANT_A		BIT(0)
-#define	ANT_B		BIT(1)
-#define	ANT_AB		(ANT_A | ANT_B)
-#define ANT_C		BIT(2)
-#define	ANT_AC		(ANT_A | ANT_C)
-#define ANT_BC		(ANT_B | ANT_C)
-#define ANT_ABC		(ANT_AB | ANT_C)
-
-static inline u8 num_of_ant(u8 mask)
-{
-	return  !!((mask) & ANT_A) +
-		!!((mask) & ANT_B) +
-		!!((mask) & ANT_C);
-}
-
-static inline u8 iwl4965_get_prev_ieee_rate(u8 rate_index)
-{
-	u8 rate = iwl_rates[rate_index].prev_ieee;
-
-	if (rate == IWL_RATE_INVALID)
-		rate = rate_index;
-	return rate;
-}
-
-/**
- * iwl4965_fill_rs_info - Fill an output text buffer with the rate representation
- *
- * NOTE:  This is provided as a quick mechanism for a user to visualize
- * the performance of the rate control algorithm and is not meant to be
- * parsed software.
- */
-extern int iwl4965_fill_rs_info(struct ieee80211_hw *, char *buf, u8 sta_id);
-
-/**
- * iwl4965_rate_control_register - Register the rate control algorithm callbacks
- *
- * Since the rate control algorithm is hardware specific, there is no need
- * or reason to place it as a stand alone module.  The driver can call
- * iwl4965_rate_control_register in order to register the rate control callbacks
- * with the mac80211 subsystem.  This should be performed prior to calling
- * ieee80211_register_hw
- *
- */
-extern int iwl4965_rate_control_register(void);
-
-/**
- * iwl4965_rate_control_unregister - Unregister the rate control callbacks
- *
- * This should be called after calling ieee80211_unregister_hw, but before
- * the driver is unloaded.
- */
-extern void iwl4965_rate_control_unregister(void);
-
-#endif
diff --git a/drivers/net/wireless/iwlwifi/iwl-4965.c b/drivers/net/wireless/iwlwifi/iwl-4965.c
index 9afecb813716..23fed3298962 100644
--- a/drivers/net/wireless/iwlwifi/iwl-4965.c
+++ b/drivers/net/wireless/iwlwifi/iwl-4965.c
@@ -26,7 +26,6 @@
 
 #include <linux/kernel.h>
 #include <linux/module.h>
-#include <linux/version.h>
 #include <linux/init.h>
 #include <linux/pci.h>
 #include <linux/dma-mapping.h>
@@ -341,39 +340,6 @@ err:
 	return -EINVAL;
 
 }
-int iwl4965_set_pwr_src(struct iwl_priv *priv, enum iwl_pwr_src src)
-{
-	int ret;
-	unsigned long flags;
-
-	spin_lock_irqsave(&priv->lock, flags);
-	ret = iwl_grab_nic_access(priv);
-	if (ret) {
-		spin_unlock_irqrestore(&priv->lock, flags);
-		return ret;
-	}
-
-	if (src == IWL_PWR_SRC_VAUX) {
-		u32 val;
-		ret = pci_read_config_dword(priv->pci_dev, PCI_POWER_SOURCE,
-					    &val);
-
-		if (val & PCI_CFG_PMC_PME_FROM_D3COLD_SUPPORT) {
-			iwl_set_bits_mask_prph(priv, APMG_PS_CTRL_REG,
-					       APMG_PS_CTRL_VAL_PWR_SRC_VAUX,
-					       ~APMG_PS_CTRL_MSK_PWR_SRC);
-		}
-	} else {
-		iwl_set_bits_mask_prph(priv, APMG_PS_CTRL_REG,
-				       APMG_PS_CTRL_VAL_PWR_SRC_VMAIN,
-				       ~APMG_PS_CTRL_MSK_PWR_SRC);
-	}
-
-	iwl_release_nic_access(priv);
-	spin_unlock_irqrestore(&priv->lock, flags);
-
-	return ret;
-}
 
 /*
  * Activate/Deactivat Tx DMA/FIFO channels according tx fifos mask
@@ -508,8 +474,8 @@ static void iwl4965_apm_stop(struct iwl_priv *priv)
 	iwl_set_bit(priv, CSR_RESET, CSR_RESET_REG_FLAG_SW_RESET);
 
 	udelay(10);
-
-	iwl_set_bit(priv, CSR_GP_CNTRL, CSR_GP_CNTRL_REG_FLAG_INIT_DONE);
+	/* clear "init complete"  move adapter D0A* --> D0U state */
+	iwl_clear_bit(priv, CSR_GP_CNTRL, CSR_GP_CNTRL_REG_FLAG_INIT_DONE);
 	spin_unlock_irqrestore(&priv->lock, flags);
 }
 
@@ -875,18 +841,6 @@ static int iwl4965_hw_set_hw_params(struct iwl_priv *priv)
 	return 0;
 }
 
-/* set card power command */
-static int iwl4965_set_power(struct iwl_priv *priv,
-		      void *cmd)
-{
-	int ret = 0;
-
-	ret = iwl_send_cmd_pdu_async(priv, POWER_TABLE_CMD,
-				    sizeof(struct iwl4965_powertable_cmd),
-				    cmd, NULL);
-	return ret;
-}
-
 static s32 iwl4965_math_div_round(s32 num, s32 denom, s32 *res)
 {
 	s32 sign = 1;
@@ -1012,7 +966,7 @@ static int iwl4965_interpolate_chan(struct iwl_priv *priv, u32 channel,
 
 	s = iwl4965_get_sub_band(priv, channel);
 	if (s >= EEPROM_TX_POWER_BANDS) {
-		IWL_ERROR("Tx Power can not find channel %d ", channel);
+		IWL_ERROR("Tx Power can not find channel %d\n", channel);
 		return -1;
 	}
 
@@ -1560,11 +1514,11 @@ static int iwl4965_fill_txpower_tbl(struct iwl_priv *priv, u8 band, u16 channel,
 					  c, atten_value, power_index,
 					tx_power.s.radio_tx_gain[c],
 					tx_power.s.dsp_predis_atten[c]);
-		}/* for each chain */
+		} /* for each chain */
 
 		tx_power_tbl->power_tbl[i].dw = cpu_to_le32(tx_power.dw);
 
-	}/* for each rate */
+	} /* for each rate */
 
 	return 0;
 }
@@ -1701,38 +1655,6 @@ static int iwl4965_shared_mem_rx_idx(struct iwl_priv *priv)
 	return le32_to_cpu(s->rb_closed) & 0xFFF;
 }
 
-unsigned int iwl4965_hw_get_beacon_cmd(struct iwl_priv *priv,
-			  struct iwl_frame *frame, u8 rate)
-{
-	struct iwl4965_tx_beacon_cmd *tx_beacon_cmd;
-	unsigned int frame_size;
-
-	tx_beacon_cmd = &frame->u.beacon;
-	memset(tx_beacon_cmd, 0, sizeof(*tx_beacon_cmd));
-
-	tx_beacon_cmd->tx.sta_id = priv->hw_params.bcast_sta_id;
-	tx_beacon_cmd->tx.stop_time.life_time = TX_CMD_LIFE_TIME_INFINITE;
-
-	frame_size = iwl4965_fill_beacon_frame(priv,
-				tx_beacon_cmd->frame,
-				iwl_bcast_addr,
-				sizeof(frame->u) - sizeof(*tx_beacon_cmd));
-
-	BUG_ON(frame_size > MAX_MPDU_SIZE);
-	tx_beacon_cmd->tx.len = cpu_to_le16((u16)frame_size);
-
-	if ((rate == IWL_RATE_1M_PLCP) || (rate >= IWL_RATE_2M_PLCP))
-		tx_beacon_cmd->tx.rate_n_flags =
-			iwl_hw_set_rate_n_flags(rate, RATE_MCS_CCK_MSK);
-	else
-		tx_beacon_cmd->tx.rate_n_flags =
-			iwl_hw_set_rate_n_flags(rate, 0);
-
-	tx_beacon_cmd->tx.tx_flags = (TX_CMD_FLG_SEQ_CTL_MSK |
-				TX_CMD_FLG_TSF_MSK | TX_CMD_FLG_STA_RATE_MSK);
-	return (sizeof(*tx_beacon_cmd) + frame_size);
-}
-
 static int iwl4965_alloc_shared_mem(struct iwl_priv *priv)
 {
 	priv->shared_virt = pci_alloc_consistent(priv->pci_dev,
@@ -2079,39 +2001,6 @@ static int iwl4965_txq_agg_enable(struct iwl_priv *priv, int txq_id,
 	return 0;
 }
 
-int iwl4965_mac_ampdu_action(struct ieee80211_hw *hw,
-			     enum ieee80211_ampdu_mlme_action action,
-			     const u8 *addr, u16 tid, u16 *ssn)
-{
-	struct iwl_priv *priv = hw->priv;
-	DECLARE_MAC_BUF(mac);
-
-	IWL_DEBUG_HT("A-MPDU action on addr %s tid %d\n",
-		     print_mac(mac, addr), tid);
-
-	if (!(priv->cfg->sku & IWL_SKU_N))
-		return -EACCES;
-
-	switch (action) {
-	case IEEE80211_AMPDU_RX_START:
-		IWL_DEBUG_HT("start Rx\n");
-		return iwl_rx_agg_start(priv, addr, tid, *ssn);
-	case IEEE80211_AMPDU_RX_STOP:
-		IWL_DEBUG_HT("stop Rx\n");
-		return iwl_rx_agg_stop(priv, addr, tid);
-	case IEEE80211_AMPDU_TX_START:
-		IWL_DEBUG_HT("start Tx\n");
-		return iwl_tx_agg_start(priv, addr, tid, ssn);
-	case IEEE80211_AMPDU_TX_STOP:
-		IWL_DEBUG_HT("stop Tx\n");
-		return iwl_tx_agg_stop(priv, addr, tid);
-	default:
-		IWL_DEBUG_HT("unknown\n");
-		return -EINVAL;
-		break;
-	}
-	return 0;
-}
 
 static u16 iwl4965_get_hcmd_size(u8 cmd_id, u16 len)
 {
@@ -2240,9 +2129,9 @@ static int iwl4965_tx_status_reply_tx(struct iwl_priv *priv,
 				bitmap = bitmap << sh;
 				sh = 0;
 			}
-			bitmap |= (1 << sh);
-			IWL_DEBUG_TX_REPLY("start=%d bitmap=0x%x\n",
-					   start, (u32)(bitmap & 0xFFFFFFFF));
+			bitmap |= 1ULL << sh;
+			IWL_DEBUG_TX_REPLY("start=%d bitmap=0x%llx\n",
+					   start, (unsigned long long)bitmap);
 		}
 
 		agg->bitmap = bitmap;
@@ -2368,6 +2257,40 @@ static void iwl4965_rx_reply_tx(struct iwl_priv *priv,
 		IWL_ERROR("TODO:  Implement Tx ABORT REQUIRED!!!\n");
 }
 
+static int iwl4965_calc_rssi(struct iwl_priv *priv,
+			     struct iwl_rx_phy_res *rx_resp)
+{
+	/* data from PHY/DSP regarding signal strength, etc.,
+	 *   contents are always there, not configurable by host.  */
+	struct iwl4965_rx_non_cfg_phy *ncphy =
+	    (struct iwl4965_rx_non_cfg_phy *)rx_resp->non_cfg_phy_buf;
+	u32 agc = (le16_to_cpu(ncphy->agc_info) & IWL49_AGC_DB_MASK)
+			>> IWL49_AGC_DB_POS;
+
+	u32 valid_antennae =
+	    (le16_to_cpu(rx_resp->phy_flags) & IWL49_RX_PHY_FLAGS_ANTENNAE_MASK)
+			>> IWL49_RX_PHY_FLAGS_ANTENNAE_OFFSET;
+	u8 max_rssi = 0;
+	u32 i;
+
+	/* Find max rssi among 3 possible receivers.
+	 * These values are measured by the digital signal processor (DSP).
+	 * They should stay fairly constant even as the signal strength varies,
+	 *   if the radio's automatic gain control (AGC) is working right.
+	 * AGC value (see below) will provide the "interesting" info. */
+	for (i = 0; i < 3; i++)
+		if (valid_antennae & (1 << i))
+			max_rssi = max(ncphy->rssi_info[i << 1], max_rssi);
+
+	IWL_DEBUG_STATS("Rssi In A %d B %d C %d Max %d AGC dB %d\n",
+		ncphy->rssi_info[0], ncphy->rssi_info[2], ncphy->rssi_info[4],
+		max_rssi, agc);
+
+	/* dBm = max_rssi dB - agc dB - constant.
+	 * Higher AGC (higher radio gain) means lower signal. */
+	return max_rssi - agc - IWL_RSSI_OFFSET;
+}
+
 
 /* Set up 4965-specific Rx frame reply handlers */
 static void iwl4965_rx_handler_setup(struct iwl_priv *priv)
@@ -2399,6 +2322,7 @@ static struct iwl_hcmd_utils_ops iwl4965_hcmd_utils = {
 	.chain_noise_reset = iwl4965_chain_noise_reset,
 	.gain_computation = iwl4965_gain_computation,
 	.rts_tx_cmd_flag = iwl4965_rts_tx_cmd_flag,
+	.calc_rssi = iwl4965_calc_rssi,
 };
 
 static struct iwl_lib_ops iwl4965_lib = {
@@ -2440,7 +2364,6 @@ static struct iwl_lib_ops iwl4965_lib = {
 		.check_version = iwl4965_eeprom_check_version,
 		.query_addr = iwlcore_eeprom_query_addr,
 	},
-	.set_power = iwl4965_set_power,
 	.send_tx_power	= iwl4965_send_tx_power,
 	.update_chain_flags = iwl4965_update_chain_flags,
 	.temperature = iwl4965_temperature_calib,
@@ -2469,7 +2392,7 @@ MODULE_PARM_DESC(antenna, "select antenna (1=Main, 2=Aux, default 0 [both])");
 module_param_named(disable, iwl4965_mod_params.disable, int, 0444);
 MODULE_PARM_DESC(disable, "manually disable the radio (default 0 [radio on])");
 module_param_named(swcrypto, iwl4965_mod_params.sw_crypto, int, 0444);
-MODULE_PARM_DESC(swcrypto, "using crypto in software (default 0 [hardware])\n");
+MODULE_PARM_DESC(swcrypto, "using crypto in software (default 0 [hardware])");
 module_param_named(debug, iwl4965_mod_params.debug, int, 0444);
 MODULE_PARM_DESC(debug, "debug output mask");
 module_param_named(
diff --git a/drivers/net/wireless/iwlwifi/iwl-5000.c b/drivers/net/wireless/iwlwifi/iwl-5000.c
index 878d6193b232..b08036a9d894 100644
--- a/drivers/net/wireless/iwlwifi/iwl-5000.c
+++ b/drivers/net/wireless/iwlwifi/iwl-5000.c
@@ -25,7 +25,6 @@
 
 #include <linux/kernel.h>
 #include <linux/module.h>
-#include <linux/version.h>
 #include <linux/init.h>
 #include <linux/pci.h>
 #include <linux/dma-mapping.h>
@@ -93,6 +92,13 @@ static int iwl5000_apm_init(struct iwl_priv *priv)
 	iwl_set_bit(priv, CSR_GIO_CHICKEN_BITS,
 		    CSR_GIO_CHICKEN_BITS_REG_BIT_L1A_NO_L0S_RX);
 
+	/* Set FH wait treshold to maximum (HW error during stress W/A) */
+	iwl_set_bit(priv, CSR_DBG_HPET_MEM_REG, CSR_DBG_HPET_MEM_REG_VAL);
+
+	/* enable HAP INTA to move device L1a -> L0s */
+	iwl_set_bit(priv, CSR_HW_IF_CONFIG_REG,
+		    CSR_HW_IF_CONFIG_REG_BIT_HAP_WAKE_L1A);
+
 	iwl_set_bit(priv, CSR_ANA_PLL_CFG, CSR50_ANA_PLL_CFG_VAL);
 
 	/* set "initialization complete" bit to move adapter
@@ -139,7 +145,8 @@ static void iwl5000_apm_stop(struct iwl_priv *priv)
 
 	udelay(10);
 
-	iwl_set_bit(priv, CSR_GP_CNTRL, CSR_GP_CNTRL_REG_FLAG_INIT_DONE);
+	/* clear "init complete"  move adapter D0A* --> D0U state */
+	iwl_clear_bit(priv, CSR_GP_CNTRL, CSR_GP_CNTRL_REG_FLAG_INIT_DONE);
 
 	spin_unlock_irqrestore(&priv->lock, flags);
 }
@@ -230,6 +237,16 @@ static void iwl5000_nic_config(struct iwl_priv *priv)
 		    CSR_HW_IF_CONFIG_REG_BIT_RADIO_SI |
 		    CSR_HW_IF_CONFIG_REG_BIT_MAC_SI);
 
+	/* W/A : NIC is stuck in a reset state after Early PCIe power off
+	 * (PCIe power is lost before PERST# is asserted),
+	 * causing ME FW to lose ownership and not being able to obtain it back.
+	 */
+	iwl_grab_nic_access(priv);
+	iwl_set_bits_mask_prph(priv, APMG_PS_CTRL_REG,
+				APMG_PS_CTRL_EARLY_PWR_OFF_RESET_DIS,
+				~APMG_PS_CTRL_EARLY_PWR_OFF_RESET_DIS);
+	iwl_release_nic_access(priv);
+
 	spin_unlock_irqrestore(&priv->lock, flags);
 }
 
@@ -561,14 +578,11 @@ static int iwl5000_load_section(struct iwl_priv *priv,
 		FH_TFDIB_CTRL0_REG(FH_SRVC_CHNL),
 		phy_addr & FH_MEM_TFDIB_DRAM_ADDR_LSB_MSK);
 
-	/* FIME: write the MSB of the phy_addr in CTRL1
-	 * iwl_write_direct32(priv,
-		IWL_FH_TFDIB_CTRL1_REG(IWL_FH_SRVC_CHNL),
-		((phy_addr & MSB_MSK)
-			<< FH_MEM_TFDIB_REG1_ADDR_BITSHIFT) | byte_count);
-	 */
 	iwl_write_direct32(priv,
-		FH_TFDIB_CTRL1_REG(FH_SRVC_CHNL), byte_cnt);
+		FH_TFDIB_CTRL1_REG(FH_SRVC_CHNL),
+		(iwl_get_dma_hi_address(phy_addr)
+			<< FH_MEM_TFDIB_REG1_ADDR_BITSHIFT) | byte_cnt);
+
 	iwl_write_direct32(priv,
 		FH_TCSR_CHNL_TX_BUF_STS_REG(FH_SRVC_CHNL),
 		1 << FH_TCSR_CHNL_TX_BUF_STS_REG_POS_TB_NUM |
@@ -924,8 +938,8 @@ static void iwl5000_txq_update_byte_cnt_tbl(struct iwl_priv *priv,
 	len = byte_cnt + IWL_TX_CRC_SIZE + IWL_TX_DELIMITER_SIZE;
 
 	if (txq_id != IWL_CMD_QUEUE_NUM) {
-		sta = txq->cmd[txq->q.write_ptr].cmd.tx.sta_id;
-		sec_ctl = txq->cmd[txq->q.write_ptr].cmd.tx.sec_ctl;
+		sta = txq->cmd[txq->q.write_ptr]->cmd.tx.sta_id;
+		sec_ctl = txq->cmd[txq->q.write_ptr]->cmd.tx.sec_ctl;
 
 		switch (sec_ctl & TX_CMD_SEC_MSK) {
 		case TX_CMD_SEC_CCM:
@@ -964,7 +978,7 @@ static void iwl5000_txq_inval_byte_cnt_tbl(struct iwl_priv *priv,
 	u8 sta = 0;
 
 	if (txq_id != IWL_CMD_QUEUE_NUM)
-		sta = txq->cmd[txq->q.read_ptr].cmd.tx.sta_id;
+		sta = txq->cmd[txq->q.read_ptr]->cmd.tx.sta_id;
 
 	shared_data->queues_byte_cnt_tbls[txq_id].tfd_offset[txq->q.read_ptr].
 					val = cpu_to_le16(1 | (sta << 12));
@@ -1131,7 +1145,7 @@ static void iwl5000_txq_set_sched(struct iwl_priv *priv, u32 mask)
 
 static inline u32 iwl5000_get_scd_ssn(struct iwl5000_tx_resp *tx_resp)
 {
-	return le32_to_cpup((__le32*)&tx_resp->status +
+	return le32_to_cpup((__le32 *)&tx_resp->status +
 			    tx_resp->frame_count) & MAX_SN;
 }
 
@@ -1228,9 +1242,9 @@ static int iwl5000_tx_status_reply_tx(struct iwl_priv *priv,
 				bitmap = bitmap << sh;
 				sh = 0;
 			}
-			bitmap |= (1 << sh);
-			IWL_DEBUG_TX_REPLY("start=%d bitmap=0x%x\n",
-					   start, (u32)(bitmap & 0xFFFFFFFF));
+			bitmap |= 1ULL << sh;
+			IWL_DEBUG_TX_REPLY("start=%d bitmap=0x%llx\n",
+					   start, (unsigned long long)bitmap);
 		}
 
 		agg->bitmap = bitmap;
@@ -1444,6 +1458,44 @@ static void iwl5000_temperature(struct iwl_priv *priv)
 	priv->temperature = le32_to_cpu(priv->statistics.general.temperature);
 }
 
+/* Calc max signal level (dBm) among 3 possible receivers */
+static int iwl5000_calc_rssi(struct iwl_priv *priv,
+			     struct iwl_rx_phy_res *rx_resp)
+{
+	/* data from PHY/DSP regarding signal strength, etc.,
+	 *   contents are always there, not configurable by host
+	 */
+	struct iwl5000_non_cfg_phy *ncphy =
+		(struct iwl5000_non_cfg_phy *)rx_resp->non_cfg_phy_buf;
+	u32 val, rssi_a, rssi_b, rssi_c, max_rssi;
+	u8 agc;
+
+	val  = le32_to_cpu(ncphy->non_cfg_phy[IWL50_RX_RES_AGC_IDX]);
+	agc = (val & IWL50_OFDM_AGC_MSK) >> IWL50_OFDM_AGC_BIT_POS;
+
+	/* Find max rssi among 3 possible receivers.
+	 * These values are measured by the digital signal processor (DSP).
+	 * They should stay fairly constant even as the signal strength varies,
+	 *   if the radio's automatic gain control (AGC) is working right.
+	 * AGC value (see below) will provide the "interesting" info.
+	 */
+	val = le32_to_cpu(ncphy->non_cfg_phy[IWL50_RX_RES_RSSI_AB_IDX]);
+	rssi_a = (val & IWL50_OFDM_RSSI_A_MSK) >> IWL50_OFDM_RSSI_A_BIT_POS;
+	rssi_b = (val & IWL50_OFDM_RSSI_B_MSK) >> IWL50_OFDM_RSSI_B_BIT_POS;
+	val = le32_to_cpu(ncphy->non_cfg_phy[IWL50_RX_RES_RSSI_C_IDX]);
+	rssi_c = (val & IWL50_OFDM_RSSI_C_MSK) >> IWL50_OFDM_RSSI_C_BIT_POS;
+
+	max_rssi = max_t(u32, rssi_a, rssi_b);
+	max_rssi = max_t(u32, max_rssi, rssi_c);
+
+	IWL_DEBUG_STATS("Rssi In A %d B %d C %d Max %d AGC dB %d\n",
+		rssi_a, rssi_b, rssi_c, max_rssi, agc);
+
+	/* dBm = max_rssi dB - agc dB - constant.
+	 * Higher AGC (higher radio gain) means lower signal. */
+	return max_rssi - agc - IWL_RSSI_OFFSET;
+}
+
 static struct iwl_hcmd_ops iwl5000_hcmd = {
 	.rxon_assoc = iwl5000_send_rxon_assoc,
 };
@@ -1454,6 +1506,7 @@ static struct iwl_hcmd_utils_ops iwl5000_hcmd_utils = {
 	.gain_computation = iwl5000_gain_computation,
 	.chain_noise_reset = iwl5000_chain_noise_reset,
 	.rts_tx_cmd_flag = iwl5000_rts_tx_cmd_flag,
+	.calc_rssi = iwl5000_calc_rssi,
 };
 
 static struct iwl_lib_ops iwl5000_lib = {
@@ -1474,6 +1527,7 @@ static struct iwl_lib_ops iwl5000_lib = {
 	.alive_notify = iwl5000_alive_notify,
 	.send_tx_power = iwl5000_send_tx_power,
 	.temperature = iwl5000_temperature,
+	.update_chain_flags = iwl4965_update_chain_flags,
 	.apm_ops = {
 		.init =	iwl5000_apm_init,
 		.reset = iwl5000_apm_reset,
diff --git a/drivers/net/wireless/iwlwifi/iwl-agn-rs.c b/drivers/net/wireless/iwlwifi/iwl-agn-rs.c
new file mode 100644
index 000000000000..90a2b6dee7c0
--- /dev/null
+++ b/drivers/net/wireless/iwlwifi/iwl-agn-rs.c
@@ -0,0 +1,2615 @@
+/******************************************************************************
+ *
+ * Copyright(c) 2005 - 2008 Intel Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ * The full GNU General Public License is included in this distribution in the
+ * file called LICENSE.
+ *
+ * Contact Information:
+ * James P. Ketrenos <ipw2100-admin@linux.intel.com>
+ * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+ *
+ *****************************************************************************/
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/skbuff.h>
+#include <linux/wireless.h>
+#include <net/mac80211.h>
+
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/delay.h>
+
+#include <linux/workqueue.h>
+
+#include "../net/mac80211/rate.h"
+
+#include "iwl-dev.h"
+#include "iwl-sta.h"
+#include "iwl-core.h"
+#include "iwl-helpers.h"
+
+#define RS_NAME "iwl-agn-rs"
+
+#define NUM_TRY_BEFORE_ANT_TOGGLE 1
+#define IWL_NUMBER_TRY      1
+#define IWL_HT_NUMBER_TRY   3
+
+#define IWL_RATE_MAX_WINDOW		62	/* # tx in history window */
+#define IWL_RATE_MIN_FAILURE_TH		6	/* min failures to calc tpt */
+#define IWL_RATE_MIN_SUCCESS_TH		8	/* min successes to calc tpt */
+
+/* max time to accum history 2 seconds */
+#define IWL_RATE_SCALE_FLUSH_INTVL   (2*HZ)
+
+static u8 rs_ht_to_legacy[] = {
+	IWL_RATE_6M_INDEX, IWL_RATE_6M_INDEX,
+	IWL_RATE_6M_INDEX, IWL_RATE_6M_INDEX,
+	IWL_RATE_6M_INDEX,
+	IWL_RATE_6M_INDEX, IWL_RATE_9M_INDEX,
+	IWL_RATE_12M_INDEX, IWL_RATE_18M_INDEX,
+	IWL_RATE_24M_INDEX, IWL_RATE_36M_INDEX,
+	IWL_RATE_48M_INDEX, IWL_RATE_54M_INDEX
+};
+
+static const u8 ant_toggle_lookup[] = {
+	/*ANT_NONE -> */ ANT_NONE,
+	/*ANT_A    -> */ ANT_B,
+	/*ANT_B    -> */ ANT_C,
+	/*ANT_AB   -> */ ANT_BC,
+	/*ANT_C    -> */ ANT_A,
+	/*ANT_AC   -> */ ANT_AB,
+	/*ANT_BC   -> */ ANT_AC,
+	/*ANT_ABC  -> */ ANT_ABC,
+};
+
+/**
+ * struct iwl_rate_scale_data -- tx success history for one rate
+ */
+struct iwl_rate_scale_data {
+	u64 data;		/* bitmap of successful frames */
+	s32 success_counter;	/* number of frames successful */
+	s32 success_ratio;	/* per-cent * 128  */
+	s32 counter;		/* number of frames attempted */
+	s32 average_tpt;	/* success ratio * expected throughput */
+	unsigned long stamp;
+};
+
+/**
+ * struct iwl_scale_tbl_info -- tx params and success history for all rates
+ *
+ * There are two of these in struct iwl_lq_sta,
+ * one for "active", and one for "search".
+ */
+struct iwl_scale_tbl_info {
+	enum iwl_table_type lq_type;
+	u8 ant_type;
+	u8 is_SGI;	/* 1 = short guard interval */
+	u8 is_fat;	/* 1 = 40 MHz channel width */
+	u8 is_dup;	/* 1 = duplicated data streams */
+	u8 action;	/* change modulation; IWL_[LEGACY/SISO/MIMO]_SWITCH_* */
+	s32 *expected_tpt;	/* throughput metrics; expected_tpt_G, etc. */
+	u32 current_rate;  /* rate_n_flags, uCode API format */
+	struct iwl_rate_scale_data win[IWL_RATE_COUNT]; /* rate histories */
+};
+
+struct iwl_traffic_load {
+	unsigned long time_stamp;	/* age of the oldest statistics */
+	u32 packet_count[TID_QUEUE_MAX_SIZE];   /* packet count in this time
+						 * slice */
+	u32 total;			/* total num of packets during the
+					 * last TID_MAX_TIME_DIFF */
+	u8 queue_count;			/* number of queues that has
+					 * been used since the last cleanup */
+	u8 head;			/* start of the circular buffer */
+};
+
+/**
+ * struct iwl_lq_sta -- driver's rate scaling private structure
+ *
+ * Pointer to this gets passed back and forth between driver and mac80211.
+ */
+struct iwl_lq_sta {
+	u8 active_tbl;		/* index of active table, range 0-1 */
+	u8 enable_counter;	/* indicates HT mode */
+	u8 stay_in_tbl;		/* 1: disallow, 0: allow search for new mode */
+	u8 search_better_tbl;	/* 1: currently trying alternate mode */
+	s32 last_tpt;
+
+	/* The following determine when to search for a new mode */
+	u32 table_count_limit;
+	u32 max_failure_limit;	/* # failed frames before new search */
+	u32 max_success_limit;	/* # successful frames before new search */
+	u32 table_count;
+	u32 total_failed;	/* total failed frames, any/all rates */
+	u32 total_success;	/* total successful frames, any/all rates */
+	u32 flush_timer;	/* time staying in mode before new search */
+
+	u8 action_counter;	/* # mode-switch actions tried */
+	u8 is_green;
+	u8 is_dup;
+	enum ieee80211_band band;
+	u8 ibss_sta_added;
+
+	/* The following are bitmaps of rates; IWL_RATE_6M_MASK, etc. */
+	u32 supp_rates;
+	u16 active_legacy_rate;
+	u16 active_siso_rate;
+	u16 active_mimo2_rate;
+	u16 active_mimo3_rate;
+	u16 active_rate_basic;
+
+	struct iwl_link_quality_cmd lq;
+	struct iwl_scale_tbl_info lq_info[LQ_SIZE]; /* "active", "search" */
+	struct iwl_traffic_load load[TID_MAX_LOAD_COUNT];
+	u8 tx_agg_tid_en;
+#ifdef CONFIG_MAC80211_DEBUGFS
+	struct dentry *rs_sta_dbgfs_scale_table_file;
+	struct dentry *rs_sta_dbgfs_stats_table_file;
+	struct dentry *rs_sta_dbgfs_tx_agg_tid_en_file;
+	u32 dbg_fixed_rate;
+#endif
+	struct iwl_priv *drv;
+};
+
+static void rs_rate_scale_perform(struct iwl_priv *priv,
+				   struct net_device *dev,
+				   struct ieee80211_hdr *hdr,
+				   struct sta_info *sta);
+static void rs_fill_link_cmd(const struct iwl_priv *priv,
+			     struct iwl_lq_sta *lq_sta, u32 rate_n_flags);
+
+
+#ifdef CONFIG_MAC80211_DEBUGFS
+static void rs_dbgfs_set_mcs(struct iwl_lq_sta *lq_sta,
+			     u32 *rate_n_flags, int index);
+#else
+static void rs_dbgfs_set_mcs(struct iwl_lq_sta *lq_sta,
+			     u32 *rate_n_flags, int index)
+{}
+#endif
+
+/*
+ * Expected throughput metrics for following rates:
+ * 1, 2, 5.5, 11, 6, 9, 12, 18, 24, 36, 48, 54, 60 MBits
+ * "G" is the only table that supports CCK (the first 4 rates).
+ */
+/*FIXME:RS:need to spearate tables for MIMO2/MIMO3*/
+static s32 expected_tpt_A[IWL_RATE_COUNT] = {
+	0, 0, 0, 0, 40, 57, 72, 98, 121, 154, 177, 186, 186
+};
+
+static s32 expected_tpt_G[IWL_RATE_COUNT] = {
+	7, 13, 35, 58, 40, 57, 72, 98, 121, 154, 177, 186, 186
+};
+
+static s32 expected_tpt_siso20MHz[IWL_RATE_COUNT] = {
+	0, 0, 0, 0, 42, 42, 76, 102, 124, 159, 183, 193, 202
+};
+
+static s32 expected_tpt_siso20MHzSGI[IWL_RATE_COUNT] = {
+	0, 0, 0, 0, 46, 46, 82, 110, 132, 168, 192, 202, 211
+};
+
+static s32 expected_tpt_mimo20MHz[IWL_RATE_COUNT] = {
+	0, 0, 0, 0, 74, 74, 123, 155, 179, 214, 236, 244, 251
+};
+
+static s32 expected_tpt_mimo20MHzSGI[IWL_RATE_COUNT] = {
+	0, 0, 0, 0, 81, 81, 131, 164, 188, 222, 243, 251, 257
+};
+
+static s32 expected_tpt_siso40MHz[IWL_RATE_COUNT] = {
+	0, 0, 0, 0, 77, 77, 127, 160, 184, 220, 242, 250, 257
+};
+
+static s32 expected_tpt_siso40MHzSGI[IWL_RATE_COUNT] = {
+	0, 0, 0, 0, 83, 83, 135, 169, 193, 229, 250, 257, 264
+};
+
+static s32 expected_tpt_mimo40MHz[IWL_RATE_COUNT] = {
+	0, 0, 0, 0, 123, 123, 182, 214, 235, 264, 279, 285, 289
+};
+
+static s32 expected_tpt_mimo40MHzSGI[IWL_RATE_COUNT] = {
+	0, 0, 0, 0, 131, 131, 191, 222, 242, 270, 284, 289, 293
+};
+
+static inline u8 rs_extract_rate(u32 rate_n_flags)
+{
+	return (u8)(rate_n_flags & 0xFF);
+}
+
+static void rs_rate_scale_clear_window(struct iwl_rate_scale_data *window)
+{
+	window->data = 0;
+	window->success_counter = 0;
+	window->success_ratio = IWL_INVALID_VALUE;
+	window->counter = 0;
+	window->average_tpt = IWL_INVALID_VALUE;
+	window->stamp = 0;
+}
+
+static inline u8 rs_is_valid_ant(u8 valid_antenna, u8 ant_type)
+{
+	return (ant_type & valid_antenna) == ant_type;
+}
+
+/*
+ *	removes the old data from the statistics. All data that is older than
+ *	TID_MAX_TIME_DIFF, will be deleted.
+ */
+static void rs_tl_rm_old_stats(struct iwl_traffic_load *tl, u32 curr_time)
+{
+	/* The oldest age we want to keep */
+	u32 oldest_time = curr_time - TID_MAX_TIME_DIFF;
+
+	while (tl->queue_count &&
+	       (tl->time_stamp < oldest_time)) {
+		tl->total -= tl->packet_count[tl->head];
+		tl->packet_count[tl->head] = 0;
+		tl->time_stamp += TID_QUEUE_CELL_SPACING;
+		tl->queue_count--;
+		tl->head++;
+		if (tl->head >= TID_QUEUE_MAX_SIZE)
+			tl->head = 0;
+	}
+}
+
+/*
+ *	increment traffic load value for tid and also remove
+ *	any old values if passed the certain time period
+ */
+static u8 rs_tl_add_packet(struct iwl_lq_sta *lq_data,
+			   struct ieee80211_hdr *hdr)
+{
+	u32 curr_time = jiffies_to_msecs(jiffies);
+	u32 time_diff;
+	s32 index;
+	struct iwl_traffic_load *tl = NULL;
+	__le16 fc = hdr->frame_control;
+	u8 tid;
+
+	if (ieee80211_is_data_qos(fc)) {
+		u8 *qc = ieee80211_get_qos_ctl(hdr);
+		tid = qc[0] & 0xf;
+	} else
+		return MAX_TID_COUNT;
+
+	tl = &lq_data->load[tid];
+
+	curr_time -= curr_time % TID_ROUND_VALUE;
+
+	/* Happens only for the first packet. Initialize the data */
+	if (!(tl->queue_count)) {
+		tl->total = 1;
+		tl->time_stamp = curr_time;
+		tl->queue_count = 1;
+		tl->head = 0;
+		tl->packet_count[0] = 1;
+		return MAX_TID_COUNT;
+	}
+
+	time_diff = TIME_WRAP_AROUND(tl->time_stamp, curr_time);
+	index = time_diff / TID_QUEUE_CELL_SPACING;
+
+	/* The history is too long: remove data that is older than */
+	/* TID_MAX_TIME_DIFF */
+	if (index >= TID_QUEUE_MAX_SIZE)
+		rs_tl_rm_old_stats(tl, curr_time);
+
+	index = (tl->head + index) % TID_QUEUE_MAX_SIZE;
+	tl->packet_count[index] = tl->packet_count[index] + 1;
+	tl->total = tl->total + 1;
+
+	if ((index + 1) > tl->queue_count)
+		tl->queue_count = index + 1;
+
+	return tid;
+}
+
+/*
+	get the traffic load value for tid
+*/
+static u32 rs_tl_get_load(struct iwl_lq_sta *lq_data, u8 tid)
+{
+	u32 curr_time = jiffies_to_msecs(jiffies);
+	u32 time_diff;
+	s32 index;
+	struct iwl_traffic_load *tl = NULL;
+
+	if (tid >= TID_MAX_LOAD_COUNT)
+		return 0;
+
+	tl = &(lq_data->load[tid]);
+
+	curr_time -= curr_time % TID_ROUND_VALUE;
+
+	if (!(tl->queue_count))
+		return 0;
+
+	time_diff = TIME_WRAP_AROUND(tl->time_stamp, curr_time);
+	index = time_diff / TID_QUEUE_CELL_SPACING;
+
+	/* The history is too long: remove data that is older than */
+	/* TID_MAX_TIME_DIFF */
+	if (index >= TID_QUEUE_MAX_SIZE)
+		rs_tl_rm_old_stats(tl, curr_time);
+
+	return tl->total;
+}
+
+static void rs_tl_turn_on_agg_for_tid(struct iwl_priv *priv,
+				      struct iwl_lq_sta *lq_data, u8 tid,
+				      struct sta_info *sta)
+{
+	unsigned long state;
+	DECLARE_MAC_BUF(mac);
+
+	spin_lock_bh(&sta->lock);
+	state = sta->ampdu_mlme.tid_state_tx[tid];
+	spin_unlock_bh(&sta->lock);
+
+	if (state == HT_AGG_STATE_IDLE &&
+	    rs_tl_get_load(lq_data, tid) > IWL_AGG_LOAD_THRESHOLD) {
+		IWL_DEBUG_HT("Starting Tx agg: STA: %s tid: %d\n",
+				print_mac(mac, sta->addr), tid);
+		ieee80211_start_tx_ba_session(priv->hw, sta->addr, tid);
+	}
+}
+
+static void rs_tl_turn_on_agg(struct iwl_priv *priv, u8 tid,
+			      struct iwl_lq_sta *lq_data,
+			      struct sta_info *sta)
+{
+	if ((tid < TID_MAX_LOAD_COUNT))
+		rs_tl_turn_on_agg_for_tid(priv, lq_data, tid, sta);
+	else if (tid == IWL_AGG_ALL_TID)
+		for (tid = 0; tid < TID_MAX_LOAD_COUNT; tid++)
+			rs_tl_turn_on_agg_for_tid(priv, lq_data, tid, sta);
+}
+
+static inline int get_num_of_ant_from_rate(u32 rate_n_flags)
+{
+	return !!(rate_n_flags & RATE_MCS_ANT_A_MSK) +
+	       !!(rate_n_flags & RATE_MCS_ANT_B_MSK) +
+	       !!(rate_n_flags & RATE_MCS_ANT_C_MSK);
+}
+
+/**
+ * rs_collect_tx_data - Update the success/failure sliding window
+ *
+ * We keep a sliding window of the last 62 packets transmitted
+ * at this rate.  window->data contains the bitmask of successful
+ * packets.
+ */
+static int rs_collect_tx_data(struct iwl_rate_scale_data *windows,
+			      int scale_index, s32 tpt, int retries,
+			      int successes)
+{
+	struct iwl_rate_scale_data *window = NULL;
+	static const u64 mask = (((u64)1) << (IWL_RATE_MAX_WINDOW - 1));
+	s32 fail_count;
+
+	if (scale_index < 0 || scale_index >= IWL_RATE_COUNT)
+		return -EINVAL;
+
+	/* Select data for current tx bit rate */
+	window = &(windows[scale_index]);
+
+	/*
+	 * Keep track of only the latest 62 tx frame attempts in this rate's
+	 * history window; anything older isn't really relevant any more.
+	 * If we have filled up the sliding window, drop the oldest attempt;
+	 * if the oldest attempt (highest bit in bitmap) shows "success",
+	 * subtract "1" from the success counter (this is the main reason
+	 * we keep these bitmaps!).
+	 */
+	while (retries > 0) {
+		if (window->counter >= IWL_RATE_MAX_WINDOW) {
+
+			/* remove earliest */
+			window->counter = IWL_RATE_MAX_WINDOW - 1;
+
+			if (window->data & mask) {
+				window->data &= ~mask;
+				window->success_counter--;
+			}
+		}
+
+		/* Increment frames-attempted counter */
+		window->counter++;
+
+		/* Shift bitmap by one frame (throw away oldest history),
+		 * OR in "1", and increment "success" if this
+		 * frame was successful. */
+		window->data <<= 1;;
+		if (successes > 0) {
+			window->success_counter++;
+			window->data |= 0x1;
+			successes--;
+		}
+
+		retries--;
+	}
+
+	/* Calculate current success ratio, avoid divide-by-0! */
+	if (window->counter > 0)
+		window->success_ratio = 128 * (100 * window->success_counter)
+					/ window->counter;
+	else
+		window->success_ratio = IWL_INVALID_VALUE;
+
+	fail_count = window->counter - window->success_counter;
+
+	/* Calculate average throughput, if we have enough history. */
+	if ((fail_count >= IWL_RATE_MIN_FAILURE_TH) ||
+	    (window->success_counter >= IWL_RATE_MIN_SUCCESS_TH))
+		window->average_tpt = (window->success_ratio * tpt + 64) / 128;
+	else
+		window->average_tpt = IWL_INVALID_VALUE;
+
+	/* Tag this window as having been updated */
+	window->stamp = jiffies;
+
+	return 0;
+}
+
+/*
+ * Fill uCode API rate_n_flags field, based on "search" or "active" table.
+ */
+/* FIXME:RS:remove this function and put the flags statically in the table */
+static u32 rate_n_flags_from_tbl(struct iwl_scale_tbl_info *tbl,
+				       int index, u8 use_green)
+{
+	u32 rate_n_flags = 0;
+
+	if (is_legacy(tbl->lq_type)) {
+		rate_n_flags = iwl_rates[index].plcp;
+		if (index >= IWL_FIRST_CCK_RATE && index <= IWL_LAST_CCK_RATE)
+			rate_n_flags |= RATE_MCS_CCK_MSK;
+
+	} else if (is_Ht(tbl->lq_type)) {
+		if (index > IWL_LAST_OFDM_RATE) {
+			IWL_ERROR("invalid HT rate index %d\n", index);
+			index = IWL_LAST_OFDM_RATE;
+		}
+		rate_n_flags = RATE_MCS_HT_MSK;
+
+		if (is_siso(tbl->lq_type))
+			rate_n_flags |=	iwl_rates[index].plcp_siso;
+		else if (is_mimo2(tbl->lq_type))
+			rate_n_flags |=	iwl_rates[index].plcp_mimo2;
+		else
+			rate_n_flags |=	iwl_rates[index].plcp_mimo3;
+	} else {
+		IWL_ERROR("Invalid tbl->lq_type %d\n", tbl->lq_type);
+	}
+
+	rate_n_flags |= ((tbl->ant_type << RATE_MCS_ANT_POS) &
+						     RATE_MCS_ANT_ABC_MSK);
+
+	if (is_Ht(tbl->lq_type)) {
+		if (tbl->is_fat) {
+			if (tbl->is_dup)
+				rate_n_flags |= RATE_MCS_DUP_MSK;
+			else
+				rate_n_flags |= RATE_MCS_FAT_MSK;
+		}
+		if (tbl->is_SGI)
+			rate_n_flags |= RATE_MCS_SGI_MSK;
+
+		if (use_green) {
+			rate_n_flags |= RATE_MCS_GF_MSK;
+			if (is_siso(tbl->lq_type) && tbl->is_SGI) {
+				rate_n_flags &= ~RATE_MCS_SGI_MSK;
+				IWL_ERROR("GF was set with SGI:SISO\n");
+			}
+		}
+	}
+	return rate_n_flags;
+}
+
+/*
+ * Interpret uCode API's rate_n_flags format,
+ * fill "search" or "active" tx mode table.
+ */
+static int rs_get_tbl_info_from_mcs(const u32 rate_n_flags,
+				    enum ieee80211_band band,
+				    struct iwl_scale_tbl_info *tbl,
+				    int *rate_idx)
+{
+	u32 ant_msk = (rate_n_flags & RATE_MCS_ANT_ABC_MSK);
+	u8 num_of_ant = get_num_of_ant_from_rate(rate_n_flags);
+	u8 mcs;
+
+	*rate_idx = iwl_hwrate_to_plcp_idx(rate_n_flags);
+
+	if (*rate_idx  == IWL_RATE_INVALID) {
+		*rate_idx = -1;
+		return -EINVAL;
+	}
+	tbl->is_SGI = 0;	/* default legacy setup */
+	tbl->is_fat = 0;
+	tbl->is_dup = 0;
+	tbl->ant_type = (ant_msk >> RATE_MCS_ANT_POS);
+	tbl->lq_type = LQ_NONE;
+
+	/* legacy rate format */
+	if (!(rate_n_flags & RATE_MCS_HT_MSK)) {
+		if (num_of_ant == 1) {
+			if (band == IEEE80211_BAND_5GHZ)
+				tbl->lq_type = LQ_A;
+			else
+				tbl->lq_type = LQ_G;
+		}
+	/* HT rate format */
+	} else {
+		if (rate_n_flags & RATE_MCS_SGI_MSK)
+			tbl->is_SGI = 1;
+
+		if ((rate_n_flags & RATE_MCS_FAT_MSK) ||
+		    (rate_n_flags & RATE_MCS_DUP_MSK))
+			tbl->is_fat = 1;
+
+		if (rate_n_flags & RATE_MCS_DUP_MSK)
+			tbl->is_dup = 1;
+
+		mcs = rs_extract_rate(rate_n_flags);
+
+		/* SISO */
+		if (mcs <= IWL_RATE_SISO_60M_PLCP) {
+			if (num_of_ant == 1)
+				tbl->lq_type = LQ_SISO; /*else NONE*/
+		/* MIMO2 */
+		} else if (mcs <= IWL_RATE_MIMO2_60M_PLCP) {
+			if (num_of_ant == 2)
+				tbl->lq_type = LQ_MIMO2;
+		/* MIMO3 */
+		} else {
+			if (num_of_ant == 3)
+				tbl->lq_type = LQ_MIMO3;
+		}
+	}
+	return 0;
+}
+
+/* switch to another antenna/antennas and return 1 */
+/* if no other valid antenna found, return 0 */
+static int rs_toggle_antenna(u32 valid_ant, u32 *rate_n_flags,
+			     struct iwl_scale_tbl_info *tbl)
+{
+	u8 new_ant_type;
+
+	if (!tbl->ant_type || tbl->ant_type > ANT_ABC)
+		return 0;
+
+	if (!rs_is_valid_ant(valid_ant, tbl->ant_type))
+		return 0;
+
+	new_ant_type = ant_toggle_lookup[tbl->ant_type];
+
+	while ((new_ant_type != tbl->ant_type) &&
+	       !rs_is_valid_ant(valid_ant, new_ant_type))
+		new_ant_type = ant_toggle_lookup[new_ant_type];
+
+	if (new_ant_type == tbl->ant_type)
+		return 0;
+
+	tbl->ant_type = new_ant_type;
+	*rate_n_flags &= ~RATE_MCS_ANT_ABC_MSK;
+	*rate_n_flags |= new_ant_type << RATE_MCS_ANT_POS;
+	return 1;
+}
+
+/* FIXME:RS: in 4965 we don't use greenfield at all */
+/* FIXME:RS: don't use greenfield for now in TX */
+#if 0
+static inline u8 rs_use_green(struct iwl_priv *priv, struct ieee80211_conf *conf)
+{
+	return (conf->flags & IEEE80211_CONF_SUPPORT_HT_MODE) &&
+		priv->current_ht_config.is_green_field &&
+		!priv->current_ht_config.non_GF_STA_present;
+}
+#endif
+static inline u8 rs_use_green(struct iwl_priv *priv, struct ieee80211_conf *conf)
+{
+	return 0;
+}
+
+/**
+ * rs_get_supported_rates - get the available rates
+ *
+ * if management frame or broadcast frame only return
+ * basic available rates.
+ *
+ */
+static u16 rs_get_supported_rates(struct iwl_lq_sta *lq_sta,
+				  struct ieee80211_hdr *hdr,
+				  enum iwl_table_type rate_type)
+{
+	if (hdr && is_multicast_ether_addr(hdr->addr1) &&
+	    lq_sta->active_rate_basic)
+		return lq_sta->active_rate_basic;
+
+	if (is_legacy(rate_type)) {
+		return lq_sta->active_legacy_rate;
+	} else {
+		if (is_siso(rate_type))
+			return lq_sta->active_siso_rate;
+		else if (is_mimo2(rate_type))
+			return lq_sta->active_mimo2_rate;
+		else
+			return lq_sta->active_mimo3_rate;
+	}
+}
+
+static u16 rs_get_adjacent_rate(struct iwl_priv *priv, u8 index, u16 rate_mask,
+				int rate_type)
+{
+	u8 high = IWL_RATE_INVALID;
+	u8 low = IWL_RATE_INVALID;
+
+	/* 802.11A or ht walks to the next literal adjacent rate in
+	 * the rate table */
+	if (is_a_band(rate_type) || !is_legacy(rate_type)) {
+		int i;
+		u32 mask;
+
+		/* Find the previous rate that is in the rate mask */
+		i = index - 1;
+		for (mask = (1 << i); i >= 0; i--, mask >>= 1) {
+			if (rate_mask & mask) {
+				low = i;
+				break;
+			}
+		}
+
+		/* Find the next rate that is in the rate mask */
+		i = index + 1;
+		for (mask = (1 << i); i < IWL_RATE_COUNT; i++, mask <<= 1) {
+			if (rate_mask & mask) {
+				high = i;
+				break;
+			}
+		}
+
+		return (high << 8) | low;
+	}
+
+	low = index;
+	while (low != IWL_RATE_INVALID) {
+		low = iwl_rates[low].prev_rs;
+		if (low == IWL_RATE_INVALID)
+			break;
+		if (rate_mask & (1 << low))
+			break;
+		IWL_DEBUG_RATE("Skipping masked lower rate: %d\n", low);
+	}
+
+	high = index;
+	while (high != IWL_RATE_INVALID) {
+		high = iwl_rates[high].next_rs;
+		if (high == IWL_RATE_INVALID)
+			break;
+		if (rate_mask & (1 << high))
+			break;
+		IWL_DEBUG_RATE("Skipping masked higher rate: %d\n", high);
+	}
+
+	return (high << 8) | low;
+}
+
+static u32 rs_get_lower_rate(struct iwl_lq_sta *lq_sta,
+			     struct iwl_scale_tbl_info *tbl,
+			     u8 scale_index, u8 ht_possible)
+{
+	s32 low;
+	u16 rate_mask;
+	u16 high_low;
+	u8 switch_to_legacy = 0;
+	u8 is_green = lq_sta->is_green;
+
+	/* check if we need to switch from HT to legacy rates.
+	 * assumption is that mandatory rates (1Mbps or 6Mbps)
+	 * are always supported (spec demand) */
+	if (!is_legacy(tbl->lq_type) && (!ht_possible || !scale_index)) {
+		switch_to_legacy = 1;
+		scale_index = rs_ht_to_legacy[scale_index];
+		if (lq_sta->band == IEEE80211_BAND_5GHZ)
+			tbl->lq_type = LQ_A;
+		else
+			tbl->lq_type = LQ_G;
+
+		if (num_of_ant(tbl->ant_type) > 1)
+			tbl->ant_type = ANT_A;/*FIXME:RS*/
+
+		tbl->is_fat = 0;
+		tbl->is_SGI = 0;
+	}
+
+	rate_mask = rs_get_supported_rates(lq_sta, NULL, tbl->lq_type);
+
+	/* Mask with station rate restriction */
+	if (is_legacy(tbl->lq_type)) {
+		/* supp_rates has no CCK bits in A mode */
+		if (lq_sta->band == IEEE80211_BAND_5GHZ)
+			rate_mask  = (u16)(rate_mask &
+			   (lq_sta->supp_rates << IWL_FIRST_OFDM_RATE));
+		else
+			rate_mask = (u16)(rate_mask & lq_sta->supp_rates);
+	}
+
+	/* If we switched from HT to legacy, check current rate */
+	if (switch_to_legacy && (rate_mask & (1 << scale_index))) {
+		low = scale_index;
+		goto out;
+	}
+
+	high_low = rs_get_adjacent_rate(lq_sta->drv, scale_index, rate_mask,
+					tbl->lq_type);
+	low = high_low & 0xff;
+
+	if (low == IWL_RATE_INVALID)
+		low = scale_index;
+
+out:
+	return rate_n_flags_from_tbl(tbl, low, is_green);
+}
+
+/*
+ * mac80211 sends us Tx status
+ */
+static void rs_tx_status(void *priv_rate, struct net_device *dev,
+			 struct sk_buff *skb)
+{
+	int status;
+	u8 retries;
+	int rs_index, index = 0;
+	struct iwl_lq_sta *lq_sta;
+	struct iwl_link_quality_cmd *table;
+	struct sta_info *sta;
+	struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data;
+	struct iwl_priv *priv = (struct iwl_priv *)priv_rate;
+	struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr);
+	struct ieee80211_hw *hw = local_to_hw(local);
+	struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
+	struct iwl_rate_scale_data *window = NULL;
+	struct iwl_rate_scale_data *search_win = NULL;
+	u32 tx_rate;
+	struct iwl_scale_tbl_info tbl_type;
+	struct iwl_scale_tbl_info *curr_tbl, *search_tbl;
+	u8 active_index = 0;
+	__le16 fc = hdr->frame_control;
+	s32 tpt = 0;
+
+	IWL_DEBUG_RATE_LIMIT("get frame ack response, update rate scale window\n");
+
+	if (!ieee80211_is_data(fc) || is_multicast_ether_addr(hdr->addr1))
+		return;
+
+	/* This packet was aggregated but doesn't carry rate scale info */
+	if ((info->flags & IEEE80211_TX_CTL_AMPDU) &&
+	    !(info->flags & IEEE80211_TX_STAT_AMPDU))
+		return;
+
+	retries = info->status.retry_count;
+
+	if (retries > 15)
+		retries = 15;
+
+	rcu_read_lock();
+
+	sta = sta_info_get(local, hdr->addr1);
+
+	if (!sta || !sta->rate_ctrl_priv)
+		goto out;
+
+
+	lq_sta = (struct iwl_lq_sta *)sta->rate_ctrl_priv;
+
+	if ((priv->iw_mode == IEEE80211_IF_TYPE_IBSS) &&
+	    !lq_sta->ibss_sta_added)
+		goto out;
+
+	table = &lq_sta->lq;
+	active_index = lq_sta->active_tbl;
+
+	curr_tbl = &(lq_sta->lq_info[active_index]);
+	search_tbl = &(lq_sta->lq_info[(1 - active_index)]);
+	window = (struct iwl_rate_scale_data *)&(curr_tbl->win[0]);
+	search_win = (struct iwl_rate_scale_data *)&(search_tbl->win[0]);
+
+	/*
+	 * Ignore this Tx frame response if its initial rate doesn't match
+	 * that of latest Link Quality command.  There may be stragglers
+	 * from a previous Link Quality command, but we're no longer interested
+	 * in those; they're either from the "active" mode while we're trying
+	 * to check "search" mode, or a prior "search" mode after we've moved
+	 * to a new "search" mode (which might become the new "active" mode).
+	 */
+	tx_rate = le32_to_cpu(table->rs_table[0].rate_n_flags);
+	rs_get_tbl_info_from_mcs(tx_rate, priv->band, &tbl_type, &rs_index);
+	if (priv->band == IEEE80211_BAND_5GHZ)
+		rs_index -= IWL_FIRST_OFDM_RATE;
+
+	if ((info->tx_rate_idx < 0) ||
+	    (tbl_type.is_SGI ^
+		!!(info->flags & IEEE80211_TX_CTL_SHORT_GI)) ||
+	    (tbl_type.is_fat ^
+		!!(info->flags & IEEE80211_TX_CTL_40_MHZ_WIDTH)) ||
+	    (tbl_type.is_dup ^
+		!!(info->flags & IEEE80211_TX_CTL_DUP_DATA)) ||
+	    (tbl_type.ant_type ^ info->antenna_sel_tx) ||
+	    (!!(tx_rate & RATE_MCS_HT_MSK) ^
+		!!(info->flags & IEEE80211_TX_CTL_OFDM_HT)) ||
+	    (!!(tx_rate & RATE_MCS_GF_MSK) ^
+		!!(info->flags & IEEE80211_TX_CTL_GREEN_FIELD)) ||
+	    (hw->wiphy->bands[priv->band]->bitrates[rs_index].bitrate !=
+	     hw->wiphy->bands[info->band]->bitrates[info->tx_rate_idx].bitrate)) {
+		IWL_DEBUG_RATE("initial rate does not match 0x%x\n", tx_rate);
+		goto out;
+	}
+
+	/* Update frame history window with "failure" for each Tx retry. */
+	while (retries) {
+		/* Look up the rate and other info used for each tx attempt.
+		 * Each tx attempt steps one entry deeper in the rate table. */
+		tx_rate = le32_to_cpu(table->rs_table[index].rate_n_flags);
+		rs_get_tbl_info_from_mcs(tx_rate, priv->band,
+					  &tbl_type, &rs_index);
+
+		/* If type matches "search" table,
+		 * add failure to "search" history */
+		if ((tbl_type.lq_type == search_tbl->lq_type) &&
+		    (tbl_type.ant_type == search_tbl->ant_type) &&
+		    (tbl_type.is_SGI == search_tbl->is_SGI)) {
+			if (search_tbl->expected_tpt)
+				tpt = search_tbl->expected_tpt[rs_index];
+			else
+				tpt = 0;
+			rs_collect_tx_data(search_win, rs_index, tpt, 1, 0);
+
+		/* Else if type matches "current/active" table,
+		 * add failure to "current/active" history */
+		} else if ((tbl_type.lq_type == curr_tbl->lq_type) &&
+			   (tbl_type.ant_type == curr_tbl->ant_type) &&
+			   (tbl_type.is_SGI == curr_tbl->is_SGI)) {
+			if (curr_tbl->expected_tpt)
+				tpt = curr_tbl->expected_tpt[rs_index];
+			else
+				tpt = 0;
+			rs_collect_tx_data(window, rs_index, tpt, 1, 0);
+		}
+
+		/* If not searching for a new mode, increment failed counter
+		 * ... this helps determine when to start searching again */
+		if (lq_sta->stay_in_tbl)
+			lq_sta->total_failed++;
+		--retries;
+		index++;
+
+	}
+
+	/*
+	 * Find (by rate) the history window to update with final Tx attempt;
+	 * if Tx was successful first try, use original rate,
+	 * else look up the rate that was, finally, successful.
+	 */
+	tx_rate = le32_to_cpu(table->rs_table[index].rate_n_flags);
+	rs_get_tbl_info_from_mcs(tx_rate, priv->band, &tbl_type, &rs_index);
+
+	/* Update frame history window with "success" if Tx got ACKed ... */
+	status = !!(info->flags & IEEE80211_TX_STAT_ACK);
+
+	/* If type matches "search" table,
+	 * add final tx status to "search" history */
+	if ((tbl_type.lq_type == search_tbl->lq_type) &&
+	    (tbl_type.ant_type == search_tbl->ant_type) &&
+	    (tbl_type.is_SGI == search_tbl->is_SGI)) {
+		if (search_tbl->expected_tpt)
+			tpt = search_tbl->expected_tpt[rs_index];
+		else
+			tpt = 0;
+		if (info->flags & IEEE80211_TX_CTL_AMPDU)
+			rs_collect_tx_data(search_win, rs_index, tpt,
+					   info->status.ampdu_ack_len,
+					   info->status.ampdu_ack_map);
+		else
+			rs_collect_tx_data(search_win, rs_index, tpt,
+					   1, status);
+	/* Else if type matches "current/active" table,
+	 * add final tx status to "current/active" history */
+	} else if ((tbl_type.lq_type == curr_tbl->lq_type) &&
+		   (tbl_type.ant_type == curr_tbl->ant_type) &&
+		   (tbl_type.is_SGI == curr_tbl->is_SGI)) {
+		if (curr_tbl->expected_tpt)
+			tpt = curr_tbl->expected_tpt[rs_index];
+		else
+			tpt = 0;
+		if (info->flags & IEEE80211_TX_CTL_AMPDU)
+			rs_collect_tx_data(window, rs_index, tpt,
+					   info->status.ampdu_ack_len,
+					   info->status.ampdu_ack_map);
+		else
+			rs_collect_tx_data(window, rs_index, tpt,
+					   1, status);
+	}
+
+	/* If not searching for new mode, increment success/failed counter
+	 * ... these help determine when to start searching again */
+	if (lq_sta->stay_in_tbl) {
+		if (info->flags & IEEE80211_TX_CTL_AMPDU) {
+			lq_sta->total_success += info->status.ampdu_ack_map;
+			lq_sta->total_failed +=
+			     (info->status.ampdu_ack_len - info->status.ampdu_ack_map);
+		} else {
+			if (status)
+				lq_sta->total_success++;
+			else
+				lq_sta->total_failed++;
+		}
+	}
+
+	/* See if there's a better rate or modulation mode to try. */
+	rs_rate_scale_perform(priv, dev, hdr, sta);
+out:
+	rcu_read_unlock();
+	return;
+}
+
+/*
+ * Begin a period of staying with a selected modulation mode.
+ * Set "stay_in_tbl" flag to prevent any mode switches.
+ * Set frame tx success limits according to legacy vs. high-throughput,
+ * and reset overall (spanning all rates) tx success history statistics.
+ * These control how long we stay using same modulation mode before
+ * searching for a new mode.
+ */
+static void rs_set_stay_in_table(struct iwl_priv *priv, u8 is_legacy,
+				 struct iwl_lq_sta *lq_sta)
+{
+	IWL_DEBUG_RATE("we are staying in the same table\n");
+	lq_sta->stay_in_tbl = 1;	/* only place this gets set */
+	if (is_legacy) {
+		lq_sta->table_count_limit = IWL_LEGACY_TABLE_COUNT;
+		lq_sta->max_failure_limit = IWL_LEGACY_FAILURE_LIMIT;
+		lq_sta->max_success_limit = IWL_LEGACY_SUCCESS_LIMIT;
+	} else {
+		lq_sta->table_count_limit = IWL_NONE_LEGACY_TABLE_COUNT;
+		lq_sta->max_failure_limit = IWL_NONE_LEGACY_FAILURE_LIMIT;
+		lq_sta->max_success_limit = IWL_NONE_LEGACY_SUCCESS_LIMIT;
+	}
+	lq_sta->table_count = 0;
+	lq_sta->total_failed = 0;
+	lq_sta->total_success = 0;
+}
+
+/*
+ * Find correct throughput table for given mode of modulation
+ */
+static void rs_set_expected_tpt_table(struct iwl_lq_sta *lq_sta,
+				      struct iwl_scale_tbl_info *tbl)
+{
+	if (is_legacy(tbl->lq_type)) {
+		if (!is_a_band(tbl->lq_type))
+			tbl->expected_tpt = expected_tpt_G;
+		else
+			tbl->expected_tpt = expected_tpt_A;
+	} else if (is_siso(tbl->lq_type)) {
+		if (tbl->is_fat && !lq_sta->is_dup)
+			if (tbl->is_SGI)
+				tbl->expected_tpt = expected_tpt_siso40MHzSGI;
+			else
+				tbl->expected_tpt = expected_tpt_siso40MHz;
+		else if (tbl->is_SGI)
+			tbl->expected_tpt = expected_tpt_siso20MHzSGI;
+		else
+			tbl->expected_tpt = expected_tpt_siso20MHz;
+
+	} else if (is_mimo(tbl->lq_type)) { /* FIXME:need to separate mimo2/3 */
+		if (tbl->is_fat && !lq_sta->is_dup)
+			if (tbl->is_SGI)
+				tbl->expected_tpt = expected_tpt_mimo40MHzSGI;
+			else
+				tbl->expected_tpt = expected_tpt_mimo40MHz;
+		else if (tbl->is_SGI)
+			tbl->expected_tpt = expected_tpt_mimo20MHzSGI;
+		else
+			tbl->expected_tpt = expected_tpt_mimo20MHz;
+	} else
+		tbl->expected_tpt = expected_tpt_G;
+}
+
+/*
+ * Find starting rate for new "search" high-throughput mode of modulation.
+ * Goal is to find lowest expected rate (under perfect conditions) that is
+ * above the current measured throughput of "active" mode, to give new mode
+ * a fair chance to prove itself without too many challenges.
+ *
+ * This gets called when transitioning to more aggressive modulation
+ * (i.e. legacy to SISO or MIMO, or SISO to MIMO), as well as less aggressive
+ * (i.e. MIMO to SISO).  When moving to MIMO, bit rate will typically need
+ * to decrease to match "active" throughput.  When moving from MIMO to SISO,
+ * bit rate will typically need to increase, but not if performance was bad.
+ */
+static s32 rs_get_best_rate(struct iwl_priv *priv,
+			    struct iwl_lq_sta *lq_sta,
+			    struct iwl_scale_tbl_info *tbl,	/* "search" */
+			    u16 rate_mask, s8 index)
+{
+	/* "active" values */
+	struct iwl_scale_tbl_info *active_tbl =
+	    &(lq_sta->lq_info[lq_sta->active_tbl]);
+	s32 active_sr = active_tbl->win[index].success_ratio;
+	s32 active_tpt = active_tbl->expected_tpt[index];
+
+	/* expected "search" throughput */
+	s32 *tpt_tbl = tbl->expected_tpt;
+
+	s32 new_rate, high, low, start_hi;
+	u16 high_low;
+	s8 rate = index;
+
+	new_rate = high = low = start_hi = IWL_RATE_INVALID;
+
+	for (; ;) {
+		high_low = rs_get_adjacent_rate(priv, rate, rate_mask,
+						tbl->lq_type);
+
+		low = high_low & 0xff;
+		high = (high_low >> 8) & 0xff;
+
+		/*
+		 * Lower the "search" bit rate, to give new "search" mode
+		 * approximately the same throughput as "active" if:
+		 *
+		 * 1) "Active" mode has been working modestly well (but not
+		 *    great), and expected "search" throughput (under perfect
+		 *    conditions) at candidate rate is above the actual
+		 *    measured "active" throughput (but less than expected
+		 *    "active" throughput under perfect conditions).
+		 * OR
+		 * 2) "Active" mode has been working perfectly or very well
+		 *    and expected "search" throughput (under perfect
+		 *    conditions) at candidate rate is above expected
+		 *    "active" throughput (under perfect conditions).
+		 */
+		if ((((100 * tpt_tbl[rate]) > lq_sta->last_tpt) &&
+		     ((active_sr > IWL_RATE_DECREASE_TH) &&
+		      (active_sr <= IWL_RATE_HIGH_TH) &&
+		      (tpt_tbl[rate] <= active_tpt))) ||
+		    ((active_sr >= IWL_RATE_SCALE_SWITCH) &&
+		     (tpt_tbl[rate] > active_tpt))) {
+
+			/* (2nd or later pass)
+			 * If we've already tried to raise the rate, and are
+			 * now trying to lower it, use the higher rate. */
+			if (start_hi != IWL_RATE_INVALID) {
+				new_rate = start_hi;
+				break;
+			}
+
+			new_rate = rate;
+
+			/* Loop again with lower rate */
+			if (low != IWL_RATE_INVALID)
+				rate = low;
+
+			/* Lower rate not available, use the original */
+			else
+				break;
+
+		/* Else try to raise the "search" rate to match "active" */
+		} else {
+			/* (2nd or later pass)
+			 * If we've already tried to lower the rate, and are
+			 * now trying to raise it, use the lower rate. */
+			if (new_rate != IWL_RATE_INVALID)
+				break;
+
+			/* Loop again with higher rate */
+			else if (high != IWL_RATE_INVALID) {
+				start_hi = high;
+				rate = high;
+
+			/* Higher rate not available, use the original */
+			} else {
+				break;
+			}
+		}
+	}
+
+	return new_rate;
+}
+
+/*
+ * Set up search table for MIMO
+ */
+static int rs_switch_to_mimo2(struct iwl_priv *priv,
+			     struct iwl_lq_sta *lq_sta,
+			     struct ieee80211_conf *conf,
+			     struct sta_info *sta,
+			     struct iwl_scale_tbl_info *tbl, int index)
+{
+	u16 rate_mask;
+	s32 rate;
+	s8 is_green = lq_sta->is_green;
+
+	if (!(conf->flags & IEEE80211_CONF_SUPPORT_HT_MODE) ||
+	    !sta->ht_info.ht_supported)
+		return -1;
+
+	if (((sta->ht_info.cap & IEEE80211_HT_CAP_MIMO_PS) >> 2)
+						== IWL_MIMO_PS_STATIC)
+		return -1;
+
+	/* Need both Tx chains/antennas to support MIMO */
+	if (priv->hw_params.tx_chains_num < 2)
+		return -1;
+
+	IWL_DEBUG_RATE("LQ: try to switch to MIMO2\n");
+
+	tbl->lq_type = LQ_MIMO2;
+	tbl->is_dup = lq_sta->is_dup;
+	tbl->action = 0;
+	rate_mask = lq_sta->active_mimo2_rate;
+
+	if (priv->current_ht_config.supported_chan_width
+					== IWL_CHANNEL_WIDTH_40MHZ)
+		tbl->is_fat = 1;
+	else
+		tbl->is_fat = 0;
+
+	/* FIXME: - don't toggle SGI here
+	if (tbl->is_fat) {
+		if (priv->current_ht_config.sgf & HT_SHORT_GI_40MHZ_ONLY)
+			tbl->is_SGI = 1;
+		else
+			tbl->is_SGI = 0;
+	} else if (priv->current_ht_config.sgf & HT_SHORT_GI_20MHZ_ONLY)
+		tbl->is_SGI = 1;
+	else
+		tbl->is_SGI = 0;
+	*/
+
+	rs_set_expected_tpt_table(lq_sta, tbl);
+
+	rate = rs_get_best_rate(priv, lq_sta, tbl, rate_mask, index);
+
+	IWL_DEBUG_RATE("LQ: MIMO2 best rate %d mask %X\n", rate, rate_mask);
+
+	if ((rate == IWL_RATE_INVALID) || !((1 << rate) & rate_mask)) {
+		IWL_DEBUG_RATE("Can't switch with index %d rate mask %x\n",
+						rate, rate_mask);
+		return -1;
+	}
+	tbl->current_rate = rate_n_flags_from_tbl(tbl, rate, is_green);
+
+	IWL_DEBUG_RATE("LQ: Switch to new mcs %X index is green %X\n",
+		     tbl->current_rate, is_green);
+	return 0;
+}
+
+/*
+ * Set up search table for SISO
+ */
+static int rs_switch_to_siso(struct iwl_priv *priv,
+			     struct iwl_lq_sta *lq_sta,
+			     struct ieee80211_conf *conf,
+			     struct sta_info *sta,
+			     struct iwl_scale_tbl_info *tbl, int index)
+{
+	u16 rate_mask;
+	u8 is_green = lq_sta->is_green;
+	s32 rate;
+
+	if (!(conf->flags & IEEE80211_CONF_SUPPORT_HT_MODE) ||
+	    !sta->ht_info.ht_supported)
+		return -1;
+
+	IWL_DEBUG_RATE("LQ: try to switch to SISO\n");
+
+	tbl->is_dup = lq_sta->is_dup;
+	tbl->lq_type = LQ_SISO;
+	tbl->action = 0;
+	rate_mask = lq_sta->active_siso_rate;
+
+	if (priv->current_ht_config.supported_chan_width
+	    == IWL_CHANNEL_WIDTH_40MHZ)
+		tbl->is_fat = 1;
+	else
+		tbl->is_fat = 0;
+
+	/* FIXME: - don't toggle SGI here
+	if (tbl->is_fat) {
+		if (priv->current_ht_config.sgf & HT_SHORT_GI_40MHZ_ONLY)
+			tbl->is_SGI = 1;
+		else
+			tbl->is_SGI = 0;
+	} else if (priv->current_ht_config.sgf & HT_SHORT_GI_20MHZ_ONLY)
+		tbl->is_SGI = 1;
+	else
+		tbl->is_SGI = 0;
+	*/
+
+	if (is_green)
+		tbl->is_SGI = 0; /*11n spec: no SGI in SISO+Greenfield*/
+
+	rs_set_expected_tpt_table(lq_sta, tbl);
+	rate = rs_get_best_rate(priv, lq_sta, tbl, rate_mask, index);
+
+	IWL_DEBUG_RATE("LQ: get best rate %d mask %X\n", rate, rate_mask);
+	if ((rate == IWL_RATE_INVALID) || !((1 << rate) & rate_mask)) {
+		IWL_DEBUG_RATE("can not switch with index %d rate mask %x\n",
+			     rate, rate_mask);
+		return -1;
+	}
+	tbl->current_rate = rate_n_flags_from_tbl(tbl, rate, is_green);
+	IWL_DEBUG_RATE("LQ: Switch to new mcs %X index is green %X\n",
+		     tbl->current_rate, is_green);
+	return 0;
+}
+
+/*
+ * Try to switch to new modulation mode from legacy
+ */
+static int rs_move_legacy_other(struct iwl_priv *priv,
+				struct iwl_lq_sta *lq_sta,
+				struct ieee80211_conf *conf,
+				struct sta_info *sta,
+				int index)
+{
+	struct iwl_scale_tbl_info *tbl = &(lq_sta->lq_info[lq_sta->active_tbl]);
+	struct iwl_scale_tbl_info *search_tbl =
+				&(lq_sta->lq_info[(1 - lq_sta->active_tbl)]);
+	struct iwl_rate_scale_data *window = &(tbl->win[index]);
+	u32 sz = (sizeof(struct iwl_scale_tbl_info) -
+		  (sizeof(struct iwl_rate_scale_data) * IWL_RATE_COUNT));
+	u8 start_action = tbl->action;
+	u8 valid_tx_ant = priv->hw_params.valid_tx_ant;
+	int ret = 0;
+
+	for (; ;) {
+		switch (tbl->action) {
+		case IWL_LEGACY_SWITCH_ANTENNA:
+			IWL_DEBUG_RATE("LQ: Legacy toggle Antenna\n");
+
+			lq_sta->action_counter++;
+
+			/* Don't change antenna if success has been great */
+			if (window->success_ratio >= IWL_RS_GOOD_RATIO)
+				break;
+
+			/* Set up search table to try other antenna */
+			memcpy(search_tbl, tbl, sz);
+
+			if (rs_toggle_antenna(valid_tx_ant,
+				&search_tbl->current_rate, search_tbl)) {
+				lq_sta->search_better_tbl = 1;
+				goto out;
+			}
+			break;
+		case IWL_LEGACY_SWITCH_SISO:
+			IWL_DEBUG_RATE("LQ: Legacy switch to SISO\n");
+
+			/* Set up search table to try SISO */
+			memcpy(search_tbl, tbl, sz);
+			search_tbl->is_SGI = 0;
+			ret = rs_switch_to_siso(priv, lq_sta, conf, sta,
+						 search_tbl, index);
+			if (!ret) {
+				lq_sta->search_better_tbl = 1;
+				lq_sta->action_counter = 0;
+				goto out;
+			}
+
+			break;
+		case IWL_LEGACY_SWITCH_MIMO2:
+			IWL_DEBUG_RATE("LQ: Legacy switch to MIMO2\n");
+
+			/* Set up search table to try MIMO */
+			memcpy(search_tbl, tbl, sz);
+			search_tbl->is_SGI = 0;
+			search_tbl->ant_type = ANT_AB;/*FIXME:RS*/
+				/*FIXME:RS:need to check ant validity*/
+			ret = rs_switch_to_mimo2(priv, lq_sta, conf, sta,
+						 search_tbl, index);
+			if (!ret) {
+				lq_sta->search_better_tbl = 1;
+				lq_sta->action_counter = 0;
+				goto out;
+			}
+			break;
+		}
+		tbl->action++;
+		if (tbl->action > IWL_LEGACY_SWITCH_MIMO2)
+			tbl->action = IWL_LEGACY_SWITCH_ANTENNA;
+
+		if (tbl->action == start_action)
+			break;
+
+	}
+	return 0;
+
+ out:
+	tbl->action++;
+	if (tbl->action > IWL_LEGACY_SWITCH_MIMO2)
+		tbl->action = IWL_LEGACY_SWITCH_ANTENNA;
+	return 0;
+
+}
+
+/*
+ * Try to switch to new modulation mode from SISO
+ */
+static int rs_move_siso_to_other(struct iwl_priv *priv,
+				 struct iwl_lq_sta *lq_sta,
+				 struct ieee80211_conf *conf,
+				 struct sta_info *sta, int index)
+{
+	u8 is_green = lq_sta->is_green;
+	struct iwl_scale_tbl_info *tbl = &(lq_sta->lq_info[lq_sta->active_tbl]);
+	struct iwl_scale_tbl_info *search_tbl =
+				&(lq_sta->lq_info[(1 - lq_sta->active_tbl)]);
+	struct iwl_rate_scale_data *window = &(tbl->win[index]);
+	u32 sz = (sizeof(struct iwl_scale_tbl_info) -
+		  (sizeof(struct iwl_rate_scale_data) * IWL_RATE_COUNT));
+	u8 start_action = tbl->action;
+	u8 valid_tx_ant = priv->hw_params.valid_tx_ant;
+	int ret;
+
+	for (;;) {
+		lq_sta->action_counter++;
+		switch (tbl->action) {
+		case IWL_SISO_SWITCH_ANTENNA:
+			IWL_DEBUG_RATE("LQ: SISO toggle Antenna\n");
+			if (window->success_ratio >= IWL_RS_GOOD_RATIO)
+				break;
+
+			memcpy(search_tbl, tbl, sz);
+			if (rs_toggle_antenna(valid_tx_ant,
+				       &search_tbl->current_rate, search_tbl)) {
+				lq_sta->search_better_tbl = 1;
+				goto out;
+			}
+			break;
+		case IWL_SISO_SWITCH_MIMO2:
+			IWL_DEBUG_RATE("LQ: SISO switch to MIMO2\n");
+			memcpy(search_tbl, tbl, sz);
+			search_tbl->is_SGI = 0;
+			search_tbl->ant_type = ANT_AB; /*FIXME:RS*/
+			ret = rs_switch_to_mimo2(priv, lq_sta, conf, sta,
+						 search_tbl, index);
+			if (!ret) {
+				lq_sta->search_better_tbl = 1;
+				goto out;
+			}
+			break;
+		case IWL_SISO_SWITCH_GI:
+			if (!tbl->is_fat &&
+				!(priv->current_ht_config.sgf &
+						HT_SHORT_GI_20MHZ))
+				break;
+			if (tbl->is_fat &&
+				!(priv->current_ht_config.sgf &
+						HT_SHORT_GI_40MHZ))
+				break;
+
+			IWL_DEBUG_RATE("LQ: SISO toggle SGI/NGI\n");
+
+			memcpy(search_tbl, tbl, sz);
+			if (is_green) {
+				if (!tbl->is_SGI)
+					break;
+				else
+					IWL_ERROR("SGI was set in GF+SISO\n");
+			}
+			search_tbl->is_SGI = !tbl->is_SGI;
+			rs_set_expected_tpt_table(lq_sta, search_tbl);
+			if (tbl->is_SGI) {
+				s32 tpt = lq_sta->last_tpt / 100;
+				if (tpt >= search_tbl->expected_tpt[index])
+					break;
+			}
+			search_tbl->current_rate = rate_n_flags_from_tbl(
+						search_tbl, index, is_green);
+			lq_sta->search_better_tbl = 1;
+			goto out;
+		}
+		tbl->action++;
+		if (tbl->action > IWL_SISO_SWITCH_GI)
+			tbl->action = IWL_SISO_SWITCH_ANTENNA;
+
+		if (tbl->action == start_action)
+			break;
+	}
+	return 0;
+
+ out:
+	tbl->action++;
+	if (tbl->action > IWL_SISO_SWITCH_GI)
+		tbl->action = IWL_SISO_SWITCH_ANTENNA;
+	return 0;
+}
+
+/*
+ * Try to switch to new modulation mode from MIMO
+ */
+static int rs_move_mimo_to_other(struct iwl_priv *priv,
+				 struct iwl_lq_sta *lq_sta,
+				 struct ieee80211_conf *conf,
+				 struct sta_info *sta, int index)
+{
+	s8 is_green = lq_sta->is_green;
+	struct iwl_scale_tbl_info *tbl = &(lq_sta->lq_info[lq_sta->active_tbl]);
+	struct iwl_scale_tbl_info *search_tbl =
+				&(lq_sta->lq_info[(1 - lq_sta->active_tbl)]);
+	u32 sz = (sizeof(struct iwl_scale_tbl_info) -
+		  (sizeof(struct iwl_rate_scale_data) * IWL_RATE_COUNT));
+	u8 start_action = tbl->action;
+	/*u8 valid_tx_ant = priv->hw_params.valid_tx_ant;*/
+	int ret;
+
+	for (;;) {
+		lq_sta->action_counter++;
+		switch (tbl->action) {
+		case IWL_MIMO_SWITCH_ANTENNA_A:
+		case IWL_MIMO_SWITCH_ANTENNA_B:
+			IWL_DEBUG_RATE("LQ: MIMO2 switch to SISO\n");
+
+			/* Set up new search table for SISO */
+			memcpy(search_tbl, tbl, sz);
+
+			/*FIXME:RS:need to check ant validity + C*/
+			if (tbl->action == IWL_MIMO_SWITCH_ANTENNA_A)
+				search_tbl->ant_type = ANT_A;
+			else
+				search_tbl->ant_type = ANT_B;
+
+			ret = rs_switch_to_siso(priv, lq_sta, conf, sta,
+						 search_tbl, index);
+			if (!ret) {
+				lq_sta->search_better_tbl = 1;
+				goto out;
+			}
+			break;
+
+		case IWL_MIMO_SWITCH_GI:
+			if (!tbl->is_fat &&
+				!(priv->current_ht_config.sgf &
+						HT_SHORT_GI_20MHZ))
+				break;
+			if (tbl->is_fat &&
+				!(priv->current_ht_config.sgf &
+						HT_SHORT_GI_40MHZ))
+				break;
+
+			IWL_DEBUG_RATE("LQ: MIMO toggle SGI/NGI\n");
+
+			/* Set up new search table for MIMO */
+			memcpy(search_tbl, tbl, sz);
+			search_tbl->is_SGI = !tbl->is_SGI;
+			rs_set_expected_tpt_table(lq_sta, search_tbl);
+			/*
+			 * If active table already uses the fastest possible
+			 * modulation (dual stream with short guard interval),
+			 * and it's working well, there's no need to look
+			 * for a better type of modulation!
+			 */
+			if (tbl->is_SGI) {
+				s32 tpt = lq_sta->last_tpt / 100;
+				if (tpt >= search_tbl->expected_tpt[index])
+					break;
+			}
+			search_tbl->current_rate = rate_n_flags_from_tbl(
+						search_tbl, index, is_green);
+			lq_sta->search_better_tbl = 1;
+			goto out;
+
+		}
+		tbl->action++;
+		if (tbl->action > IWL_MIMO_SWITCH_GI)
+			tbl->action = IWL_MIMO_SWITCH_ANTENNA_A;
+
+		if (tbl->action == start_action)
+			break;
+	}
+
+	return 0;
+ out:
+	tbl->action++;
+	if (tbl->action > IWL_MIMO_SWITCH_GI)
+		tbl->action = IWL_MIMO_SWITCH_ANTENNA_A;
+	return 0;
+
+}
+
+/*
+ * Check whether we should continue using same modulation mode, or
+ * begin search for a new mode, based on:
+ * 1) # tx successes or failures while using this mode
+ * 2) # times calling this function
+ * 3) elapsed time in this mode (not used, for now)
+ */
+static void rs_stay_in_table(struct iwl_lq_sta *lq_sta)
+{
+	struct iwl_scale_tbl_info *tbl;
+	int i;
+	int active_tbl;
+	int flush_interval_passed = 0;
+	struct iwl_priv *priv;
+
+	priv = lq_sta->drv;
+	active_tbl = lq_sta->active_tbl;
+
+	tbl = &(lq_sta->lq_info[active_tbl]);
+
+	/* If we've been disallowing search, see if we should now allow it */
+	if (lq_sta->stay_in_tbl) {
+
+		/* Elapsed time using current modulation mode */
+		if (lq_sta->flush_timer)
+			flush_interval_passed =
+			    time_after(jiffies,
+				       (unsigned long)(lq_sta->flush_timer +
+					IWL_RATE_SCALE_FLUSH_INTVL));
+
+		/*
+		 * Check if we should allow search for new modulation mode.
+		 * If many frames have failed or succeeded, or we've used
+		 * this same modulation for a long time, allow search, and
+		 * reset history stats that keep track of whether we should
+		 * allow a new search.  Also (below) reset all bitmaps and
+		 * stats in active history.
+		 */
+		if ((lq_sta->total_failed > lq_sta->max_failure_limit) ||
+		    (lq_sta->total_success > lq_sta->max_success_limit) ||
+		    ((!lq_sta->search_better_tbl) && (lq_sta->flush_timer)
+		     && (flush_interval_passed))) {
+			IWL_DEBUG_RATE("LQ: stay is expired %d %d %d\n:",
+				     lq_sta->total_failed,
+				     lq_sta->total_success,
+				     flush_interval_passed);
+
+			/* Allow search for new mode */
+			lq_sta->stay_in_tbl = 0;	/* only place reset */
+			lq_sta->total_failed = 0;
+			lq_sta->total_success = 0;
+			lq_sta->flush_timer = 0;
+
+		/*
+		 * Else if we've used this modulation mode enough repetitions
+		 * (regardless of elapsed time or success/failure), reset
+		 * history bitmaps and rate-specific stats for all rates in
+		 * active table.
+		 */
+		} else {
+			lq_sta->table_count++;
+			if (lq_sta->table_count >=
+			    lq_sta->table_count_limit) {
+				lq_sta->table_count = 0;
+
+				IWL_DEBUG_RATE("LQ: stay in table clear win\n");
+				for (i = 0; i < IWL_RATE_COUNT; i++)
+					rs_rate_scale_clear_window(
+						&(tbl->win[i]));
+			}
+		}
+
+		/* If transitioning to allow "search", reset all history
+		 * bitmaps and stats in active table (this will become the new
+		 * "search" table). */
+		if (!lq_sta->stay_in_tbl) {
+			for (i = 0; i < IWL_RATE_COUNT; i++)
+				rs_rate_scale_clear_window(&(tbl->win[i]));
+		}
+	}
+}
+
+/*
+ * Do rate scaling and search for new modulation mode.
+ */
+static void rs_rate_scale_perform(struct iwl_priv *priv,
+				  struct net_device *dev,
+				  struct ieee80211_hdr *hdr,
+				  struct sta_info *sta)
+{
+	struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr);
+	struct ieee80211_hw *hw = local_to_hw(local);
+	struct ieee80211_conf *conf = &hw->conf;
+	int low = IWL_RATE_INVALID;
+	int high = IWL_RATE_INVALID;
+	int index;
+	int i;
+	struct iwl_rate_scale_data *window = NULL;
+	int current_tpt = IWL_INVALID_VALUE;
+	int low_tpt = IWL_INVALID_VALUE;
+	int high_tpt = IWL_INVALID_VALUE;
+	u32 fail_count;
+	s8 scale_action = 0;
+	__le16 fc;
+	u16 rate_mask;
+	u8 update_lq = 0;
+	struct iwl_lq_sta *lq_sta;
+	struct iwl_scale_tbl_info *tbl, *tbl1;
+	u16 rate_scale_index_msk = 0;
+	u32 rate;
+	u8 is_green = 0;
+	u8 active_tbl = 0;
+	u8 done_search = 0;
+	u16 high_low;
+	s32 sr;
+	u8 tid = MAX_TID_COUNT;
+
+	IWL_DEBUG_RATE("rate scale calculate new rate for skb\n");
+
+	fc = hdr->frame_control;
+	if (!ieee80211_is_data(fc) || is_multicast_ether_addr(hdr->addr1)) {
+		/* Send management frames and broadcast/multicast data using
+		 * lowest rate. */
+		/* TODO: this could probably be improved.. */
+		return;
+	}
+
+	if (!sta || !sta->rate_ctrl_priv)
+		return;
+
+	lq_sta = (struct iwl_lq_sta *)sta->rate_ctrl_priv;
+
+	tid = rs_tl_add_packet(lq_sta, hdr);
+
+	/*
+	 * Select rate-scale / modulation-mode table to work with in
+	 * the rest of this function:  "search" if searching for better
+	 * modulation mode, or "active" if doing rate scaling within a mode.
+	 */
+	if (!lq_sta->search_better_tbl)
+		active_tbl = lq_sta->active_tbl;
+	else
+		active_tbl = 1 - lq_sta->active_tbl;
+
+	tbl = &(lq_sta->lq_info[active_tbl]);
+	is_green = lq_sta->is_green;
+
+	/* current tx rate */
+	index = sta->last_txrate_idx;
+
+	IWL_DEBUG_RATE("Rate scale index %d for type %d\n", index,
+		       tbl->lq_type);
+
+	/* rates available for this association, and for modulation mode */
+	rate_mask = rs_get_supported_rates(lq_sta, hdr, tbl->lq_type);
+
+	IWL_DEBUG_RATE("mask 0x%04X \n", rate_mask);
+
+	/* mask with station rate restriction */
+	if (is_legacy(tbl->lq_type)) {
+		if (lq_sta->band == IEEE80211_BAND_5GHZ)
+			/* supp_rates has no CCK bits in A mode */
+			rate_scale_index_msk = (u16) (rate_mask &
+				(lq_sta->supp_rates << IWL_FIRST_OFDM_RATE));
+		else
+			rate_scale_index_msk = (u16) (rate_mask &
+						      lq_sta->supp_rates);
+
+	} else
+		rate_scale_index_msk = rate_mask;
+
+	if (!rate_scale_index_msk)
+		rate_scale_index_msk = rate_mask;
+
+	if (!((1 << index) & rate_scale_index_msk)) {
+		IWL_ERROR("Current Rate is not valid\n");
+		return;
+	}
+
+	/* Get expected throughput table and history window for current rate */
+	if (!tbl->expected_tpt) {
+		IWL_ERROR("tbl->expected_tpt is NULL\n");
+		return;
+	}
+
+	window = &(tbl->win[index]);
+
+	/*
+	 * If there is not enough history to calculate actual average
+	 * throughput, keep analyzing results of more tx frames, without
+	 * changing rate or mode (bypass most of the rest of this function).
+	 * Set up new rate table in uCode only if old rate is not supported
+	 * in current association (use new rate found above).
+	 */
+	fail_count = window->counter - window->success_counter;
+	if ((fail_count < IWL_RATE_MIN_FAILURE_TH) &&
+			(window->success_counter < IWL_RATE_MIN_SUCCESS_TH)) {
+		IWL_DEBUG_RATE("LQ: still below TH. succ=%d total=%d "
+			       "for index %d\n",
+			       window->success_counter, window->counter, index);
+
+		/* Can't calculate this yet; not enough history */
+		window->average_tpt = IWL_INVALID_VALUE;
+
+		/* Should we stay with this modulation mode,
+		 * or search for a new one? */
+		rs_stay_in_table(lq_sta);
+
+		goto out;
+
+	/* Else we have enough samples; calculate estimate of
+	 * actual average throughput */
+	} else {
+		/*FIXME:RS remove this else if we don't get this error*/
+		if (window->average_tpt != ((window->success_ratio *
+				tbl->expected_tpt[index] + 64) / 128)) {
+			IWL_ERROR("expected_tpt should have been calculated"
+								" by now\n");
+			window->average_tpt = ((window->success_ratio *
+					tbl->expected_tpt[index] + 64) / 128);
+		}
+	}
+
+	/* If we are searching for better modulation mode, check success. */
+	if (lq_sta->search_better_tbl) {
+
+		/* If good success, continue using the "search" mode;
+		 * no need to send new link quality command, since we're
+		 * continuing to use the setup that we've been trying. */
+		if (window->average_tpt > lq_sta->last_tpt) {
+
+			IWL_DEBUG_RATE("LQ: SWITCHING TO CURRENT TABLE "
+					"suc=%d cur-tpt=%d old-tpt=%d\n",
+					window->success_ratio,
+					window->average_tpt,
+					lq_sta->last_tpt);
+
+			if (!is_legacy(tbl->lq_type))
+				lq_sta->enable_counter = 1;
+
+			/* Swap tables; "search" becomes "active" */
+			lq_sta->active_tbl = active_tbl;
+			current_tpt = window->average_tpt;
+
+		/* Else poor success; go back to mode in "active" table */
+		} else {
+
+			IWL_DEBUG_RATE("LQ: GOING BACK TO THE OLD TABLE "
+					"suc=%d cur-tpt=%d old-tpt=%d\n",
+					window->success_ratio,
+					window->average_tpt,
+					lq_sta->last_tpt);
+
+			/* Nullify "search" table */
+			tbl->lq_type = LQ_NONE;
+
+			/* Revert to "active" table */
+			active_tbl = lq_sta->active_tbl;
+			tbl = &(lq_sta->lq_info[active_tbl]);
+
+			/* Revert to "active" rate and throughput info */
+			index = iwl_hwrate_to_plcp_idx(tbl->current_rate);
+			current_tpt = lq_sta->last_tpt;
+
+			/* Need to set up a new rate table in uCode */
+			update_lq = 1;
+		}
+
+		/* Either way, we've made a decision; modulation mode
+		 * search is done, allow rate adjustment next time. */
+		lq_sta->search_better_tbl = 0;
+		done_search = 1;	/* Don't switch modes below! */
+		goto lq_update;
+	}
+
+	/* (Else) not in search of better modulation mode, try for better
+	 * starting rate, while staying in this mode. */
+	high_low = rs_get_adjacent_rate(priv, index, rate_scale_index_msk,
+					tbl->lq_type);
+	low = high_low & 0xff;
+	high = (high_low >> 8) & 0xff;
+
+	sr = window->success_ratio;
+
+	/* Collect measured throughputs for current and adjacent rates */
+	current_tpt = window->average_tpt;
+	if (low != IWL_RATE_INVALID)
+		low_tpt = tbl->win[low].average_tpt;
+	if (high != IWL_RATE_INVALID)
+		high_tpt = tbl->win[high].average_tpt;
+
+	scale_action = 0;
+
+	/* Too many failures, decrease rate */
+	if ((sr <= IWL_RATE_DECREASE_TH) || (current_tpt == 0)) {
+		IWL_DEBUG_RATE("decrease rate because of low success_ratio\n");
+		scale_action = -1;
+
+	/* No throughput measured yet for adjacent rates; try increase. */
+	} else if ((low_tpt == IWL_INVALID_VALUE) &&
+		   (high_tpt == IWL_INVALID_VALUE)) {
+
+		if (high != IWL_RATE_INVALID && sr >= IWL_RATE_INCREASE_TH)
+			scale_action = 1;
+		else if (low != IWL_RATE_INVALID)
+			scale_action = -1;
+	}
+
+	/* Both adjacent throughputs are measured, but neither one has better
+	 * throughput; we're using the best rate, don't change it! */
+	else if ((low_tpt != IWL_INVALID_VALUE) &&
+		 (high_tpt != IWL_INVALID_VALUE) &&
+		 (low_tpt < current_tpt) &&
+		 (high_tpt < current_tpt))
+		scale_action = 0;
+
+	/* At least one adjacent rate's throughput is measured,
+	 * and may have better performance. */
+	else {
+		/* Higher adjacent rate's throughput is measured */
+		if (high_tpt != IWL_INVALID_VALUE) {
+			/* Higher rate has better throughput */
+			if (high_tpt > current_tpt &&
+					sr >= IWL_RATE_INCREASE_TH) {
+				scale_action = 1;
+			} else {
+				IWL_DEBUG_RATE
+				    ("decrease rate because of high tpt\n");
+				scale_action = -1;
+			}
+
+		/* Lower adjacent rate's throughput is measured */
+		} else if (low_tpt != IWL_INVALID_VALUE) {
+			/* Lower rate has better throughput */
+			if (low_tpt > current_tpt) {
+				IWL_DEBUG_RATE
+				    ("decrease rate because of low tpt\n");
+				scale_action = -1;
+			} else if (sr >= IWL_RATE_INCREASE_TH) {
+				scale_action = 1;
+			}
+		}
+	}
+
+	/* Sanity check; asked for decrease, but success rate or throughput
+	 * has been good at old rate.  Don't change it. */
+	if ((scale_action == -1) && (low != IWL_RATE_INVALID) &&
+		    ((sr > IWL_RATE_HIGH_TH) ||
+		     (current_tpt > (100 * tbl->expected_tpt[low]))))
+		scale_action = 0;
+
+	switch (scale_action) {
+	case -1:
+		/* Decrease starting rate, update uCode's rate table */
+		if (low != IWL_RATE_INVALID) {
+			update_lq = 1;
+			index = low;
+		}
+		break;
+	case 1:
+		/* Increase starting rate, update uCode's rate table */
+		if (high != IWL_RATE_INVALID) {
+			update_lq = 1;
+			index = high;
+		}
+
+		break;
+	case 0:
+		/* No change */
+	default:
+		break;
+	}
+
+	IWL_DEBUG_RATE("choose rate scale index %d action %d low %d "
+		    "high %d type %d\n",
+		     index, scale_action, low, high, tbl->lq_type);
+
+lq_update:
+	/* Replace uCode's rate table for the destination station. */
+	if (update_lq) {
+		rate = rate_n_flags_from_tbl(tbl, index, is_green);
+		rs_fill_link_cmd(priv, lq_sta, rate);
+		iwl_send_lq_cmd(priv, &lq_sta->lq, CMD_ASYNC);
+	}
+
+	/* Should we stay with this modulation mode, or search for a new one? */
+	rs_stay_in_table(lq_sta);
+
+	/*
+	 * Search for new modulation mode if we're:
+	 * 1)  Not changing rates right now
+	 * 2)  Not just finishing up a search
+	 * 3)  Allowing a new search
+	 */
+	if (!update_lq && !done_search && !lq_sta->stay_in_tbl && window->counter) {
+		/* Save current throughput to compare with "search" throughput*/
+		lq_sta->last_tpt = current_tpt;
+
+		/* Select a new "search" modulation mode to try.
+		 * If one is found, set up the new "search" table. */
+		if (is_legacy(tbl->lq_type))
+			rs_move_legacy_other(priv, lq_sta, conf, sta, index);
+		else if (is_siso(tbl->lq_type))
+			rs_move_siso_to_other(priv, lq_sta, conf, sta, index);
+		else
+			rs_move_mimo_to_other(priv, lq_sta, conf, sta, index);
+
+		/* If new "search" mode was selected, set up in uCode table */
+		if (lq_sta->search_better_tbl) {
+			/* Access the "search" table, clear its history. */
+			tbl = &(lq_sta->lq_info[(1 - lq_sta->active_tbl)]);
+			for (i = 0; i < IWL_RATE_COUNT; i++)
+				rs_rate_scale_clear_window(&(tbl->win[i]));
+
+			/* Use new "search" start rate */
+			index = iwl_hwrate_to_plcp_idx(tbl->current_rate);
+
+			IWL_DEBUG_RATE("Switch current  mcs: %X index: %d\n",
+				     tbl->current_rate, index);
+			rs_fill_link_cmd(priv, lq_sta, tbl->current_rate);
+			iwl_send_lq_cmd(priv, &lq_sta->lq, CMD_ASYNC);
+		}
+
+		/* If the "active" (non-search) mode was legacy,
+		 * and we've tried switching antennas,
+		 * but we haven't been able to try HT modes (not available),
+		 * stay with best antenna legacy modulation for a while
+		 * before next round of mode comparisons. */
+		tbl1 = &(lq_sta->lq_info[lq_sta->active_tbl]);
+		if (is_legacy(tbl1->lq_type) &&
+		   (!(conf->flags & IEEE80211_CONF_SUPPORT_HT_MODE)) &&
+		    (lq_sta->action_counter >= 1)) {
+			lq_sta->action_counter = 0;
+			IWL_DEBUG_RATE("LQ: STAY in legacy table\n");
+			rs_set_stay_in_table(priv, 1, lq_sta);
+		}
+
+		/* If we're in an HT mode, and all 3 mode switch actions
+		 * have been tried and compared, stay in this best modulation
+		 * mode for a while before next round of mode comparisons. */
+		if (lq_sta->enable_counter &&
+		    (lq_sta->action_counter >= IWL_ACTION_LIMIT)) {
+			if ((lq_sta->last_tpt > IWL_AGG_TPT_THREHOLD) &&
+			    (lq_sta->tx_agg_tid_en & (1 << tid)) &&
+			    (tid != MAX_TID_COUNT)) {
+				IWL_DEBUG_RATE("try to aggregate tid %d\n", tid);
+				rs_tl_turn_on_agg(priv, tid, lq_sta, sta);
+			}
+			lq_sta->action_counter = 0;
+			rs_set_stay_in_table(priv, 0, lq_sta);
+		}
+
+	/*
+	 * Else, don't search for a new modulation mode.
+	 * Put new timestamp in stay-in-modulation-mode flush timer if:
+	 * 1)  Not changing rates right now
+	 * 2)  Not just finishing up a search
+	 * 3)  flush timer is empty
+	 */
+	} else {
+		if ((!update_lq) && (!done_search) && (!lq_sta->flush_timer))
+			lq_sta->flush_timer = jiffies;
+	}
+
+out:
+	tbl->current_rate = rate_n_flags_from_tbl(tbl, index, is_green);
+	i = index;
+	sta->last_txrate_idx = i;
+
+	/* sta->txrate_idx is an index to A mode rates which start
+	 * at IWL_FIRST_OFDM_RATE
+	 */
+	if (lq_sta->band == IEEE80211_BAND_5GHZ)
+		sta->txrate_idx = i - IWL_FIRST_OFDM_RATE;
+	else
+		sta->txrate_idx = i;
+
+	return;
+}
+
+
+static void rs_initialize_lq(struct iwl_priv *priv,
+			     struct ieee80211_conf *conf,
+			     struct sta_info *sta)
+{
+	struct iwl_lq_sta *lq_sta;
+	struct iwl_scale_tbl_info *tbl;
+	int rate_idx;
+	int i;
+	u32 rate;
+	u8 use_green = rs_use_green(priv, conf);
+	u8 active_tbl = 0;
+	u8 valid_tx_ant;
+
+	if (!sta || !sta->rate_ctrl_priv)
+		goto out;
+
+	lq_sta = (struct iwl_lq_sta *)sta->rate_ctrl_priv;
+	i = sta->last_txrate_idx;
+
+	if ((lq_sta->lq.sta_id == 0xff) &&
+	    (priv->iw_mode == IEEE80211_IF_TYPE_IBSS))
+		goto out;
+
+	valid_tx_ant = priv->hw_params.valid_tx_ant;
+
+	if (!lq_sta->search_better_tbl)
+		active_tbl = lq_sta->active_tbl;
+	else
+		active_tbl = 1 - lq_sta->active_tbl;
+
+	tbl = &(lq_sta->lq_info[active_tbl]);
+
+	if ((i < 0) || (i >= IWL_RATE_COUNT))
+		i = 0;
+
+	/* FIXME:RS: This is also wrong in 4965 */
+	rate = iwl_rates[i].plcp;
+	rate |= RATE_MCS_ANT_B_MSK;
+	rate &= ~RATE_MCS_ANT_A_MSK;
+
+	if (i >= IWL_FIRST_CCK_RATE && i <= IWL_LAST_CCK_RATE)
+		rate |= RATE_MCS_CCK_MSK;
+
+	tbl->ant_type = ANT_B;
+	rs_get_tbl_info_from_mcs(rate, priv->band, tbl, &rate_idx);
+	if (!rs_is_valid_ant(valid_tx_ant, tbl->ant_type))
+	    rs_toggle_antenna(valid_tx_ant, &rate, tbl);
+
+	rate = rate_n_flags_from_tbl(tbl, rate_idx, use_green);
+	tbl->current_rate = rate;
+	rs_set_expected_tpt_table(lq_sta, tbl);
+	rs_fill_link_cmd(NULL, lq_sta, rate);
+	iwl_send_lq_cmd(priv, &lq_sta->lq, CMD_ASYNC);
+ out:
+	return;
+}
+
+static void rs_get_rate(void *priv_rate, struct net_device *dev,
+			struct ieee80211_supported_band *sband,
+			struct sk_buff *skb,
+			struct rate_selection *sel)
+{
+
+	int i;
+	struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr);
+	struct ieee80211_conf *conf = &local->hw.conf;
+	struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data;
+	struct sta_info *sta;
+	__le16 fc;
+	struct iwl_priv *priv = (struct iwl_priv *)priv_rate;
+	struct iwl_lq_sta *lq_sta;
+
+	IWL_DEBUG_RATE_LIMIT("rate scale calculate new rate for skb\n");
+
+	rcu_read_lock();
+
+	sta = sta_info_get(local, hdr->addr1);
+
+	/* Send management frames and broadcast/multicast data using lowest
+	 * rate. */
+	fc = hdr->frame_control;
+	if (!ieee80211_is_data(fc) || is_multicast_ether_addr(hdr->addr1) ||
+	    !sta || !sta->rate_ctrl_priv) {
+		sel->rate_idx = rate_lowest_index(local, sband, sta);
+		goto out;
+	}
+
+	lq_sta = (struct iwl_lq_sta *)sta->rate_ctrl_priv;
+	i = sta->last_txrate_idx;
+
+	if ((priv->iw_mode == IEEE80211_IF_TYPE_IBSS) &&
+	    !lq_sta->ibss_sta_added) {
+		u8 sta_id = iwl_find_station(priv, hdr->addr1);
+		DECLARE_MAC_BUF(mac);
+
+		if (sta_id == IWL_INVALID_STATION) {
+			IWL_DEBUG_RATE("LQ: ADD station %s\n",
+				       print_mac(mac, hdr->addr1));
+			sta_id = iwl_add_station_flags(priv, hdr->addr1,
+							0, CMD_ASYNC, NULL);
+		}
+		if ((sta_id != IWL_INVALID_STATION)) {
+			lq_sta->lq.sta_id = sta_id;
+			lq_sta->lq.rs_table[0].rate_n_flags = 0;
+			lq_sta->ibss_sta_added = 1;
+			rs_initialize_lq(priv, conf, sta);
+		}
+	}
+
+	if ((i < 0) || (i > IWL_RATE_COUNT)) {
+		sel->rate_idx = rate_lowest_index(local, sband, sta);
+		goto out;
+	}
+
+	if (sband->band == IEEE80211_BAND_5GHZ)
+		i -= IWL_FIRST_OFDM_RATE;
+	sel->rate_idx = i;
+out:
+	rcu_read_unlock();
+}
+
+static void *rs_alloc_sta(void *priv_rate, gfp_t gfp)
+{
+	struct iwl_lq_sta *lq_sta;
+	struct iwl_priv *priv;
+	int i, j;
+
+	priv = (struct iwl_priv *)priv_rate;
+	IWL_DEBUG_RATE("create station rate scale window\n");
+
+	lq_sta = kzalloc(sizeof(struct iwl_lq_sta), gfp);
+
+	if (lq_sta == NULL)
+		return NULL;
+	lq_sta->lq.sta_id = 0xff;
+
+
+	for (j = 0; j < LQ_SIZE; j++)
+		for (i = 0; i < IWL_RATE_COUNT; i++)
+			rs_rate_scale_clear_window(&lq_sta->lq_info[j].win[i]);
+
+	return lq_sta;
+}
+
+static void rs_rate_init(void *priv_rate, void *priv_sta,
+			 struct ieee80211_local *local,
+			 struct sta_info *sta)
+{
+	int i, j;
+	struct ieee80211_conf *conf = &local->hw.conf;
+	struct ieee80211_supported_band *sband;
+	struct iwl_priv *priv = (struct iwl_priv *)priv_rate;
+	struct iwl_lq_sta *lq_sta = priv_sta;
+
+	sband = local->hw.wiphy->bands[local->hw.conf.channel->band];
+
+	lq_sta->flush_timer = 0;
+	lq_sta->supp_rates = sta->supp_rates[sband->band];
+	sta->txrate_idx = 3;
+	for (j = 0; j < LQ_SIZE; j++)
+		for (i = 0; i < IWL_RATE_COUNT; i++)
+			rs_rate_scale_clear_window(&lq_sta->lq_info[j].win[i]);
+
+	IWL_DEBUG_RATE("LQ: *** rate scale global init ***\n");
+	/* TODO: what is a good starting rate for STA? About middle? Maybe not
+	 * the lowest or the highest rate.. Could consider using RSSI from
+	 * previous packets? Need to have IEEE 802.1X auth succeed immediately
+	 * after assoc.. */
+
+	lq_sta->ibss_sta_added = 0;
+	if (priv->iw_mode == IEEE80211_IF_TYPE_AP) {
+		u8 sta_id = iwl_find_station(priv, sta->addr);
+		DECLARE_MAC_BUF(mac);
+
+		/* for IBSS the call are from tasklet */
+		IWL_DEBUG_RATE("LQ: ADD station %s\n",
+			     print_mac(mac, sta->addr));
+
+		if (sta_id == IWL_INVALID_STATION) {
+			IWL_DEBUG_RATE("LQ: ADD station %s\n",
+				       print_mac(mac, sta->addr));
+			sta_id = iwl_add_station_flags(priv, sta->addr,
+							0, CMD_ASYNC, NULL);
+		}
+		if ((sta_id != IWL_INVALID_STATION)) {
+			lq_sta->lq.sta_id = sta_id;
+			lq_sta->lq.rs_table[0].rate_n_flags = 0;
+		}
+		/* FIXME: this is w/a remove it later */
+		priv->assoc_station_added = 1;
+	}
+
+	/* Find highest tx rate supported by hardware and destination station */
+	for (i = 0; i < sband->n_bitrates; i++)
+		if (sta->supp_rates[sband->band] & BIT(i))
+			sta->txrate_idx = i;
+
+	sta->last_txrate_idx = sta->txrate_idx;
+	/* WTF is with this bogus comment? A doesn't have cck rates */
+	/* For MODE_IEEE80211A, cck rates are at end of rate table */
+	if (local->hw.conf.channel->band == IEEE80211_BAND_5GHZ)
+		sta->last_txrate_idx += IWL_FIRST_OFDM_RATE;
+
+	lq_sta->is_dup = 0;
+	lq_sta->is_green = rs_use_green(priv, conf);
+	lq_sta->active_legacy_rate = priv->active_rate & ~(0x1000);
+	lq_sta->active_rate_basic = priv->active_rate_basic;
+	lq_sta->band = priv->band;
+	/*
+	 * active_siso_rate mask includes 9 MBits (bit 5), and CCK (bits 0-3),
+	 * supp_rates[] does not; shift to convert format, force 9 MBits off.
+	 */
+	lq_sta->active_siso_rate = conf->ht_conf.supp_mcs_set[0] << 1;
+	lq_sta->active_siso_rate |= conf->ht_conf.supp_mcs_set[0] & 0x1;
+	lq_sta->active_siso_rate &= ~((u16)0x2);
+	lq_sta->active_siso_rate <<= IWL_FIRST_OFDM_RATE;
+
+	/* Same here */
+	lq_sta->active_mimo2_rate = conf->ht_conf.supp_mcs_set[1] << 1;
+	lq_sta->active_mimo2_rate |= conf->ht_conf.supp_mcs_set[1] & 0x1;
+	lq_sta->active_mimo2_rate &= ~((u16)0x2);
+	lq_sta->active_mimo2_rate <<= IWL_FIRST_OFDM_RATE;
+
+	lq_sta->active_mimo3_rate = conf->ht_conf.supp_mcs_set[2] << 1;
+	lq_sta->active_mimo3_rate |= conf->ht_conf.supp_mcs_set[2] & 0x1;
+	lq_sta->active_mimo3_rate &= ~((u16)0x2);
+	lq_sta->active_mimo3_rate <<= IWL_FIRST_OFDM_RATE;
+
+	IWL_DEBUG_RATE("SISO-RATE=%X MIMO2-RATE=%X MIMO3-RATE=%X\n",
+		     lq_sta->active_siso_rate,
+		     lq_sta->active_mimo2_rate,
+		     lq_sta->active_mimo3_rate);
+
+	/* These values will be overriden later */
+	lq_sta->lq.general_params.single_stream_ant_msk = ANT_A;
+	lq_sta->lq.general_params.dual_stream_ant_msk = ANT_AB;
+
+	/* as default allow aggregation for all tids */
+	lq_sta->tx_agg_tid_en = IWL_AGG_ALL_TID;
+	lq_sta->drv = priv;
+
+	rs_initialize_lq(priv, conf, sta);
+}
+
+static void rs_fill_link_cmd(const struct iwl_priv *priv,
+			     struct iwl_lq_sta *lq_sta, u32 new_rate)
+{
+	struct iwl_scale_tbl_info tbl_type;
+	int index = 0;
+	int rate_idx;
+	int repeat_rate = 0;
+	u8 ant_toggle_cnt = 0;
+	u8 use_ht_possible = 1;
+	u8 valid_tx_ant = 0;
+	struct iwl_link_quality_cmd *lq_cmd = &lq_sta->lq;
+
+	/* Override starting rate (index 0) if needed for debug purposes */
+	rs_dbgfs_set_mcs(lq_sta, &new_rate, index);
+
+	/* Interpret new_rate (rate_n_flags) */
+	memset(&tbl_type, 0, sizeof(tbl_type));
+	rs_get_tbl_info_from_mcs(new_rate, lq_sta->band,
+				  &tbl_type, &rate_idx);
+
+	/* How many times should we repeat the initial rate? */
+	if (is_legacy(tbl_type.lq_type)) {
+		ant_toggle_cnt = 1;
+		repeat_rate = IWL_NUMBER_TRY;
+	} else {
+		repeat_rate = IWL_HT_NUMBER_TRY;
+	}
+
+	lq_cmd->general_params.mimo_delimiter =
+			is_mimo(tbl_type.lq_type) ? 1 : 0;
+
+	/* Fill 1st table entry (index 0) */
+	lq_cmd->rs_table[index].rate_n_flags = cpu_to_le32(new_rate);
+
+	if (num_of_ant(tbl_type.ant_type) == 1) {
+		lq_cmd->general_params.single_stream_ant_msk =
+						tbl_type.ant_type;
+	} else if (num_of_ant(tbl_type.ant_type) == 2) {
+		lq_cmd->general_params.dual_stream_ant_msk =
+						tbl_type.ant_type;
+	} /* otherwise we don't modify the existing value */
+
+	index++;
+	repeat_rate--;
+
+	if (priv)
+		valid_tx_ant = priv->hw_params.valid_tx_ant;
+
+	/* Fill rest of rate table */
+	while (index < LINK_QUAL_MAX_RETRY_NUM) {
+		/* Repeat initial/next rate.
+		 * For legacy IWL_NUMBER_TRY == 1, this loop will not execute.
+		 * For HT IWL_HT_NUMBER_TRY == 3, this executes twice. */
+		while (repeat_rate > 0 && (index < LINK_QUAL_MAX_RETRY_NUM)) {
+			if (is_legacy(tbl_type.lq_type)) {
+				if (ant_toggle_cnt < NUM_TRY_BEFORE_ANT_TOGGLE)
+					ant_toggle_cnt++;
+				else if (priv &&
+					 rs_toggle_antenna(valid_tx_ant,
+							&new_rate, &tbl_type))
+					ant_toggle_cnt = 1;
+}
+
+			/* Override next rate if needed for debug purposes */
+			rs_dbgfs_set_mcs(lq_sta, &new_rate, index);
+
+			/* Fill next table entry */
+			lq_cmd->rs_table[index].rate_n_flags =
+					cpu_to_le32(new_rate);
+			repeat_rate--;
+			index++;
+		}
+
+		rs_get_tbl_info_from_mcs(new_rate, lq_sta->band, &tbl_type,
+						&rate_idx);
+
+		/* Indicate to uCode which entries might be MIMO.
+		 * If initial rate was MIMO, this will finally end up
+		 * as (IWL_HT_NUMBER_TRY * 2), after 2nd pass, otherwise 0. */
+		if (is_mimo(tbl_type.lq_type))
+			lq_cmd->general_params.mimo_delimiter = index;
+
+		/* Get next rate */
+		new_rate = rs_get_lower_rate(lq_sta, &tbl_type, rate_idx,
+					     use_ht_possible);
+
+		/* How many times should we repeat the next rate? */
+		if (is_legacy(tbl_type.lq_type)) {
+			if (ant_toggle_cnt < NUM_TRY_BEFORE_ANT_TOGGLE)
+				ant_toggle_cnt++;
+			else if (priv &&
+				 rs_toggle_antenna(valid_tx_ant,
+						   &new_rate, &tbl_type))
+				ant_toggle_cnt = 1;
+
+			repeat_rate = IWL_NUMBER_TRY;
+		} else {
+			repeat_rate = IWL_HT_NUMBER_TRY;
+		}
+
+		/* Don't allow HT rates after next pass.
+		 * rs_get_lower_rate() will change type to LQ_A or LQ_G. */
+		use_ht_possible = 0;
+
+		/* Override next rate if needed for debug purposes */
+		rs_dbgfs_set_mcs(lq_sta, &new_rate, index);
+
+		/* Fill next table entry */
+		lq_cmd->rs_table[index].rate_n_flags = cpu_to_le32(new_rate);
+
+		index++;
+		repeat_rate--;
+	}
+
+	lq_cmd->agg_params.agg_frame_cnt_limit = 64;
+	lq_cmd->agg_params.agg_dis_start_th = 3;
+	lq_cmd->agg_params.agg_time_limit = cpu_to_le16(4000);
+}
+
+static void *rs_alloc(struct ieee80211_local *local)
+{
+	return local->hw.priv;
+}
+/* rate scale requires free function to be implemented */
+static void rs_free(void *priv_rate)
+{
+	return;
+}
+
+static void rs_clear(void *priv_rate)
+{
+#ifdef CONFIG_IWLWIFI_DEBUG
+	struct iwl_priv *priv = (struct iwl_priv *) priv_rate;
+
+	IWL_DEBUG_RATE("enter\n");
+
+	/* TODO - add rate scale state reset */
+
+	IWL_DEBUG_RATE("leave\n");
+#endif /* CONFIG_IWLWIFI_DEBUG */
+}
+
+static void rs_free_sta(void *priv_rate, void *priv_sta)
+{
+	struct iwl_lq_sta *lq_sta = priv_sta;
+	struct iwl_priv *priv;
+
+	priv = (struct iwl_priv *)priv_rate;
+	IWL_DEBUG_RATE("enter\n");
+	kfree(lq_sta);
+	IWL_DEBUG_RATE("leave\n");
+}
+
+
+#ifdef CONFIG_MAC80211_DEBUGFS
+static int open_file_generic(struct inode *inode, struct file *file)
+{
+	file->private_data = inode->i_private;
+	return 0;
+}
+static void rs_dbgfs_set_mcs(struct iwl_lq_sta *lq_sta,
+			     u32 *rate_n_flags, int index)
+{
+	struct iwl_priv *priv;
+
+	priv = lq_sta->drv;
+	if (lq_sta->dbg_fixed_rate) {
+		if (index < 12) {
+			*rate_n_flags = lq_sta->dbg_fixed_rate;
+		} else {
+			if (lq_sta->band == IEEE80211_BAND_5GHZ)
+				*rate_n_flags = 0x800D;
+			else
+				*rate_n_flags = 0x820A;
+		}
+		IWL_DEBUG_RATE("Fixed rate ON\n");
+	} else {
+		IWL_DEBUG_RATE("Fixed rate OFF\n");
+	}
+}
+
+static ssize_t rs_sta_dbgfs_scale_table_write(struct file *file,
+			const char __user *user_buf, size_t count, loff_t *ppos)
+{
+	struct iwl_lq_sta *lq_sta = file->private_data;
+	struct iwl_priv *priv;
+	char buf[64];
+	int buf_size;
+	u32 parsed_rate;
+
+	priv = lq_sta->drv;
+	memset(buf, 0, sizeof(buf));
+	buf_size = min(count, sizeof(buf) -  1);
+	if (copy_from_user(buf, user_buf, buf_size))
+		return -EFAULT;
+
+	if (sscanf(buf, "%x", &parsed_rate) == 1)
+		lq_sta->dbg_fixed_rate = parsed_rate;
+	else
+		lq_sta->dbg_fixed_rate = 0;
+
+	lq_sta->active_legacy_rate = 0x0FFF;	/* 1 - 54 MBits, includes CCK */
+	lq_sta->active_siso_rate   = 0x1FD0;	/* 6 - 60 MBits, no 9, no CCK */
+	lq_sta->active_mimo2_rate  = 0x1FD0;	/* 6 - 60 MBits, no 9, no CCK */
+	lq_sta->active_mimo3_rate  = 0x1FD0;	/* 6 - 60 MBits, no 9, no CCK */
+
+	IWL_DEBUG_RATE("sta_id %d rate 0x%X\n",
+		lq_sta->lq.sta_id, lq_sta->dbg_fixed_rate);
+
+	if (lq_sta->dbg_fixed_rate) {
+		rs_fill_link_cmd(NULL, lq_sta, lq_sta->dbg_fixed_rate);
+		iwl_send_lq_cmd(lq_sta->drv, &lq_sta->lq, CMD_ASYNC);
+	}
+
+	return count;
+}
+
+static ssize_t rs_sta_dbgfs_scale_table_read(struct file *file,
+			char __user *user_buf, size_t count, loff_t *ppos)
+{
+	char buff[1024];
+	int desc = 0;
+	int i = 0;
+
+	struct iwl_lq_sta *lq_sta = file->private_data;
+
+	desc += sprintf(buff+desc, "sta_id %d\n", lq_sta->lq.sta_id);
+	desc += sprintf(buff+desc, "failed=%d success=%d rate=0%X\n",
+			lq_sta->total_failed, lq_sta->total_success,
+			lq_sta->active_legacy_rate);
+	desc += sprintf(buff+desc, "fixed rate 0x%X\n",
+			lq_sta->dbg_fixed_rate);
+	desc += sprintf(buff+desc, "general:"
+		"flags=0x%X mimo-d=%d s-ant0x%x d-ant=0x%x\n",
+		lq_sta->lq.general_params.flags,
+		lq_sta->lq.general_params.mimo_delimiter,
+		lq_sta->lq.general_params.single_stream_ant_msk,
+		lq_sta->lq.general_params.dual_stream_ant_msk);
+
+	desc += sprintf(buff+desc, "agg:"
+			"time_limit=%d dist_start_th=%d frame_cnt_limit=%d\n",
+			le16_to_cpu(lq_sta->lq.agg_params.agg_time_limit),
+			lq_sta->lq.agg_params.agg_dis_start_th,
+			lq_sta->lq.agg_params.agg_frame_cnt_limit);
+
+	desc += sprintf(buff+desc,
+			"Start idx [0]=0x%x [1]=0x%x [2]=0x%x [3]=0x%x\n",
+			lq_sta->lq.general_params.start_rate_index[0],
+			lq_sta->lq.general_params.start_rate_index[1],
+			lq_sta->lq.general_params.start_rate_index[2],
+			lq_sta->lq.general_params.start_rate_index[3]);
+
+
+	for (i = 0; i < LINK_QUAL_MAX_RETRY_NUM; i++)
+		desc += sprintf(buff+desc, " rate[%d] 0x%X\n",
+			i, le32_to_cpu(lq_sta->lq.rs_table[i].rate_n_flags));
+
+	return simple_read_from_buffer(user_buf, count, ppos, buff, desc);
+}
+
+static const struct file_operations rs_sta_dbgfs_scale_table_ops = {
+	.write = rs_sta_dbgfs_scale_table_write,
+	.read = rs_sta_dbgfs_scale_table_read,
+	.open = open_file_generic,
+};
+static ssize_t rs_sta_dbgfs_stats_table_read(struct file *file,
+			char __user *user_buf, size_t count, loff_t *ppos)
+{
+	char buff[1024];
+	int desc = 0;
+	int i, j;
+
+	struct iwl_lq_sta *lq_sta = file->private_data;
+	for (i = 0; i < LQ_SIZE; i++) {
+		desc += sprintf(buff+desc, "%s type=%d SGI=%d FAT=%d DUP=%d\n"
+				"rate=0x%X\n",
+				lq_sta->active_tbl == i?"*":"x",
+				lq_sta->lq_info[i].lq_type,
+				lq_sta->lq_info[i].is_SGI,
+				lq_sta->lq_info[i].is_fat,
+				lq_sta->lq_info[i].is_dup,
+				lq_sta->lq_info[i].current_rate);
+		for (j = 0; j < IWL_RATE_COUNT; j++) {
+			desc += sprintf(buff+desc,
+				"counter=%d success=%d %%=%d\n",
+				lq_sta->lq_info[i].win[j].counter,
+				lq_sta->lq_info[i].win[j].success_counter,
+				lq_sta->lq_info[i].win[j].success_ratio);
+		}
+	}
+	return simple_read_from_buffer(user_buf, count, ppos, buff, desc);
+}
+
+static const struct file_operations rs_sta_dbgfs_stats_table_ops = {
+	.read = rs_sta_dbgfs_stats_table_read,
+	.open = open_file_generic,
+};
+
+static void rs_add_debugfs(void *priv, void *priv_sta,
+					struct dentry *dir)
+{
+	struct iwl_lq_sta *lq_sta = priv_sta;
+	lq_sta->rs_sta_dbgfs_scale_table_file =
+		debugfs_create_file("rate_scale_table", 0600, dir,
+				lq_sta, &rs_sta_dbgfs_scale_table_ops);
+	lq_sta->rs_sta_dbgfs_stats_table_file =
+		debugfs_create_file("rate_stats_table", 0600, dir,
+			lq_sta, &rs_sta_dbgfs_stats_table_ops);
+	lq_sta->rs_sta_dbgfs_tx_agg_tid_en_file =
+		debugfs_create_u8("tx_agg_tid_enable", 0600, dir,
+		&lq_sta->tx_agg_tid_en);
+
+}
+
+static void rs_remove_debugfs(void *priv, void *priv_sta)
+{
+	struct iwl_lq_sta *lq_sta = priv_sta;
+	debugfs_remove(lq_sta->rs_sta_dbgfs_scale_table_file);
+	debugfs_remove(lq_sta->rs_sta_dbgfs_stats_table_file);
+	debugfs_remove(lq_sta->rs_sta_dbgfs_tx_agg_tid_en_file);
+}
+#endif
+
+static struct rate_control_ops rs_ops = {
+	.module = NULL,
+	.name = RS_NAME,
+	.tx_status = rs_tx_status,
+	.get_rate = rs_get_rate,
+	.rate_init = rs_rate_init,
+	.clear = rs_clear,
+	.alloc = rs_alloc,
+	.free = rs_free,
+	.alloc_sta = rs_alloc_sta,
+	.free_sta = rs_free_sta,
+#ifdef CONFIG_MAC80211_DEBUGFS
+	.add_sta_debugfs = rs_add_debugfs,
+	.remove_sta_debugfs = rs_remove_debugfs,
+#endif
+};
+
+int iwlagn_rate_control_register(void)
+{
+	return ieee80211_rate_control_register(&rs_ops);
+}
+
+void iwlagn_rate_control_unregister(void)
+{
+	ieee80211_rate_control_unregister(&rs_ops);
+}
+
diff --git a/drivers/net/wireless/iwlwifi/iwl-agn-rs.h b/drivers/net/wireless/iwlwifi/iwl-agn-rs.h
new file mode 100644
index 000000000000..84d4d1e33755
--- /dev/null
+++ b/drivers/net/wireless/iwlwifi/iwl-agn-rs.h
@@ -0,0 +1,309 @@
+/******************************************************************************
+ *
+ * Copyright(c) 2003 - 2008 Intel Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ * The full GNU General Public License is included in this distribution in the
+ * file called LICENSE.
+ *
+ * Contact Information:
+ * James P. Ketrenos <ipw2100-admin@linux.intel.com>
+ * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+ *
+ *****************************************************************************/
+
+#ifndef __iwl_agn_rs_h__
+#define __iwl_agn_rs_h__
+
+#include "iwl-dev.h"
+
+struct iwl_rate_info {
+	u8 plcp;	/* uCode API:  IWL_RATE_6M_PLCP, etc. */
+	u8 plcp_siso;	/* uCode API:  IWL_RATE_SISO_6M_PLCP, etc. */
+	u8 plcp_mimo2;	/* uCode API:  IWL_RATE_MIMO2_6M_PLCP, etc. */
+	u8 plcp_mimo3;  /* uCode API:  IWL_RATE_MIMO3_6M_PLCP, etc. */
+	u8 ieee;	/* MAC header:  IWL_RATE_6M_IEEE, etc. */
+	u8 prev_ieee;    /* previous rate in IEEE speeds */
+	u8 next_ieee;    /* next rate in IEEE speeds */
+	u8 prev_rs;      /* previous rate used in rs algo */
+	u8 next_rs;      /* next rate used in rs algo */
+	u8 prev_rs_tgg;  /* previous rate used in TGG rs algo */
+	u8 next_rs_tgg;  /* next rate used in TGG rs algo */
+};
+
+/*
+ * These serve as indexes into
+ * struct iwl_rate_info iwl_rates[IWL_RATE_COUNT];
+ */
+enum {
+	IWL_RATE_1M_INDEX = 0,
+	IWL_RATE_2M_INDEX,
+	IWL_RATE_5M_INDEX,
+	IWL_RATE_11M_INDEX,
+	IWL_RATE_6M_INDEX,
+	IWL_RATE_9M_INDEX,
+	IWL_RATE_12M_INDEX,
+	IWL_RATE_18M_INDEX,
+	IWL_RATE_24M_INDEX,
+	IWL_RATE_36M_INDEX,
+	IWL_RATE_48M_INDEX,
+	IWL_RATE_54M_INDEX,
+	IWL_RATE_60M_INDEX,
+	IWL_RATE_COUNT, /*FIXME:RS:change to IWL_RATE_INDEX_COUNT,*/
+	IWL_RATE_INVM_INDEX = IWL_RATE_COUNT,
+	IWL_RATE_INVALID = IWL_RATE_COUNT,
+};
+
+enum {
+	IWL_FIRST_OFDM_RATE = IWL_RATE_6M_INDEX,
+	IWL_LAST_OFDM_RATE = IWL_RATE_60M_INDEX,
+	IWL_FIRST_CCK_RATE = IWL_RATE_1M_INDEX,
+	IWL_LAST_CCK_RATE = IWL_RATE_11M_INDEX,
+};
+
+/* #define vs. enum to keep from defaulting to 'large integer' */
+#define	IWL_RATE_6M_MASK   (1 << IWL_RATE_6M_INDEX)
+#define	IWL_RATE_9M_MASK   (1 << IWL_RATE_9M_INDEX)
+#define	IWL_RATE_12M_MASK  (1 << IWL_RATE_12M_INDEX)
+#define	IWL_RATE_18M_MASK  (1 << IWL_RATE_18M_INDEX)
+#define	IWL_RATE_24M_MASK  (1 << IWL_RATE_24M_INDEX)
+#define	IWL_RATE_36M_MASK  (1 << IWL_RATE_36M_INDEX)
+#define	IWL_RATE_48M_MASK  (1 << IWL_RATE_48M_INDEX)
+#define	IWL_RATE_54M_MASK  (1 << IWL_RATE_54M_INDEX)
+#define IWL_RATE_60M_MASK  (1 << IWL_RATE_60M_INDEX)
+#define	IWL_RATE_1M_MASK   (1 << IWL_RATE_1M_INDEX)
+#define	IWL_RATE_2M_MASK   (1 << IWL_RATE_2M_INDEX)
+#define	IWL_RATE_5M_MASK   (1 << IWL_RATE_5M_INDEX)
+#define	IWL_RATE_11M_MASK  (1 << IWL_RATE_11M_INDEX)
+
+/* uCode API values for legacy bit rates, both OFDM and CCK */
+enum {
+	IWL_RATE_6M_PLCP  = 13,
+	IWL_RATE_9M_PLCP  = 15,
+	IWL_RATE_12M_PLCP = 5,
+	IWL_RATE_18M_PLCP = 7,
+	IWL_RATE_24M_PLCP = 9,
+	IWL_RATE_36M_PLCP = 11,
+	IWL_RATE_48M_PLCP = 1,
+	IWL_RATE_54M_PLCP = 3,
+	IWL_RATE_60M_PLCP = 3,/*FIXME:RS:should be removed*/
+	IWL_RATE_1M_PLCP  = 10,
+	IWL_RATE_2M_PLCP  = 20,
+	IWL_RATE_5M_PLCP  = 55,
+	IWL_RATE_11M_PLCP = 110,
+	/*FIXME:RS:change to IWL_RATE_LEGACY_??M_PLCP */
+	/*FIXME:RS:add IWL_RATE_LEGACY_INVM_PLCP = 0,*/
+};
+
+/* uCode API values for OFDM high-throughput (HT) bit rates */
+enum {
+	IWL_RATE_SISO_6M_PLCP = 0,
+	IWL_RATE_SISO_12M_PLCP = 1,
+	IWL_RATE_SISO_18M_PLCP = 2,
+	IWL_RATE_SISO_24M_PLCP = 3,
+	IWL_RATE_SISO_36M_PLCP = 4,
+	IWL_RATE_SISO_48M_PLCP = 5,
+	IWL_RATE_SISO_54M_PLCP = 6,
+	IWL_RATE_SISO_60M_PLCP = 7,
+	IWL_RATE_MIMO2_6M_PLCP  = 0x8,
+	IWL_RATE_MIMO2_12M_PLCP = 0x9,
+	IWL_RATE_MIMO2_18M_PLCP = 0xa,
+	IWL_RATE_MIMO2_24M_PLCP = 0xb,
+	IWL_RATE_MIMO2_36M_PLCP = 0xc,
+	IWL_RATE_MIMO2_48M_PLCP = 0xd,
+	IWL_RATE_MIMO2_54M_PLCP = 0xe,
+	IWL_RATE_MIMO2_60M_PLCP = 0xf,
+	IWL_RATE_MIMO3_6M_PLCP  = 0x10,
+	IWL_RATE_MIMO3_12M_PLCP = 0x11,
+	IWL_RATE_MIMO3_18M_PLCP = 0x12,
+	IWL_RATE_MIMO3_24M_PLCP = 0x13,
+	IWL_RATE_MIMO3_36M_PLCP = 0x14,
+	IWL_RATE_MIMO3_48M_PLCP = 0x15,
+	IWL_RATE_MIMO3_54M_PLCP = 0x16,
+	IWL_RATE_MIMO3_60M_PLCP = 0x17,
+	IWL_RATE_SISO_INVM_PLCP,
+	IWL_RATE_MIMO2_INVM_PLCP = IWL_RATE_SISO_INVM_PLCP,
+	IWL_RATE_MIMO3_INVM_PLCP = IWL_RATE_SISO_INVM_PLCP,
+};
+
+/* MAC header values for bit rates */
+enum {
+	IWL_RATE_6M_IEEE  = 12,
+	IWL_RATE_9M_IEEE  = 18,
+	IWL_RATE_12M_IEEE = 24,
+	IWL_RATE_18M_IEEE = 36,
+	IWL_RATE_24M_IEEE = 48,
+	IWL_RATE_36M_IEEE = 72,
+	IWL_RATE_48M_IEEE = 96,
+	IWL_RATE_54M_IEEE = 108,
+	IWL_RATE_60M_IEEE = 120,
+	IWL_RATE_1M_IEEE  = 2,
+	IWL_RATE_2M_IEEE  = 4,
+	IWL_RATE_5M_IEEE  = 11,
+	IWL_RATE_11M_IEEE = 22,
+};
+
+#define IWL_CCK_BASIC_RATES_MASK    \
+       (IWL_RATE_1M_MASK          | \
+	IWL_RATE_2M_MASK)
+
+#define IWL_CCK_RATES_MASK          \
+       (IWL_BASIC_RATES_MASK      | \
+	IWL_RATE_5M_MASK          | \
+	IWL_RATE_11M_MASK)
+
+#define IWL_OFDM_BASIC_RATES_MASK   \
+	(IWL_RATE_6M_MASK         | \
+	IWL_RATE_12M_MASK         | \
+	IWL_RATE_24M_MASK)
+
+#define IWL_OFDM_RATES_MASK         \
+       (IWL_OFDM_BASIC_RATES_MASK | \
+	IWL_RATE_9M_MASK          | \
+	IWL_RATE_18M_MASK         | \
+	IWL_RATE_36M_MASK         | \
+	IWL_RATE_48M_MASK         | \
+	IWL_RATE_54M_MASK)
+
+#define IWL_BASIC_RATES_MASK         \
+	(IWL_OFDM_BASIC_RATES_MASK | \
+	 IWL_CCK_BASIC_RATES_MASK)
+
+#define IWL_RATES_MASK ((1 << IWL_RATE_COUNT) - 1)
+
+#define IWL_INVALID_VALUE    -1
+
+#define IWL_MIN_RSSI_VAL                 -100
+#define IWL_MAX_RSSI_VAL                    0
+
+/* These values specify how many Tx frame attempts before
+ * searching for a new modulation mode */
+#define IWL_LEGACY_FAILURE_LIMIT	160
+#define IWL_LEGACY_SUCCESS_LIMIT	480
+#define IWL_LEGACY_TABLE_COUNT		160
+
+#define IWL_NONE_LEGACY_FAILURE_LIMIT	400
+#define IWL_NONE_LEGACY_SUCCESS_LIMIT	4500
+#define IWL_NONE_LEGACY_TABLE_COUNT	1500
+
+/* Success ratio (ACKed / attempted tx frames) values (perfect is 128 * 100) */
+#define IWL_RS_GOOD_RATIO		12800	/* 100% */
+#define IWL_RATE_SCALE_SWITCH		10880	/*  85% */
+#define IWL_RATE_HIGH_TH		10880	/*  85% */
+#define IWL_RATE_INCREASE_TH            8960	/*  70% */
+#define IWL_RATE_DECREASE_TH		1920	/*  15% */
+
+/* possible actions when in legacy mode */
+#define IWL_LEGACY_SWITCH_ANTENNA	0
+#define IWL_LEGACY_SWITCH_SISO		1
+#define IWL_LEGACY_SWITCH_MIMO2		2
+
+/* possible actions when in siso mode */
+#define IWL_SISO_SWITCH_ANTENNA		0
+#define IWL_SISO_SWITCH_MIMO2		1
+#define IWL_SISO_SWITCH_GI		2
+
+/* possible actions when in mimo mode */
+#define IWL_MIMO_SWITCH_ANTENNA_A	0
+#define IWL_MIMO_SWITCH_ANTENNA_B	1
+#define IWL_MIMO_SWITCH_GI		2
+
+/*FIXME:RS:separate MIMO2/3 transitions*/
+
+/*FIXME:RS:add posible acctions for MIMO3*/
+
+#define IWL_ACTION_LIMIT		3	/* # possible actions */
+
+#define LQ_SIZE		2	/* 2 mode tables:  "Active" and "Search" */
+
+/* load per tid defines for A-MPDU activation */
+#define IWL_AGG_TPT_THREHOLD	0
+#define IWL_AGG_LOAD_THRESHOLD	10
+#define IWL_AGG_ALL_TID		0xff
+#define TID_QUEUE_CELL_SPACING	50	/*mS */
+#define TID_QUEUE_MAX_SIZE	20
+#define TID_ROUND_VALUE		5	/* mS */
+#define TID_MAX_LOAD_COUNT	8
+
+#define TID_MAX_TIME_DIFF ((TID_QUEUE_MAX_SIZE - 1) * TID_QUEUE_CELL_SPACING)
+#define TIME_WRAP_AROUND(x, y) (((y) > (x)) ? (y) - (x) : (0-(x)) + (y))
+
+extern const struct iwl_rate_info iwl_rates[IWL_RATE_COUNT];
+
+enum iwl_table_type {
+	LQ_NONE,
+	LQ_G,		/* legacy types */
+	LQ_A,
+	LQ_SISO,	/* high-throughput types */
+	LQ_MIMO2,
+	LQ_MIMO3,
+	LQ_MAX,
+};
+
+#define is_legacy(tbl) (((tbl) == LQ_G) || ((tbl) == LQ_A))
+#define is_siso(tbl) ((tbl) == LQ_SISO)
+#define is_mimo2(tbl) ((tbl) == LQ_MIMO2)
+#define is_mimo3(tbl) ((tbl) == LQ_MIMO3)
+#define is_mimo(tbl) (is_mimo2(tbl) || is_mimo3(tbl))
+#define is_Ht(tbl) (is_siso(tbl) || is_mimo(tbl))
+#define is_a_band(tbl) ((tbl) == LQ_A)
+#define is_g_and(tbl) ((tbl) == LQ_G)
+
+#define	ANT_NONE	0x0
+#define	ANT_A		BIT(0)
+#define	ANT_B		BIT(1)
+#define	ANT_AB		(ANT_A | ANT_B)
+#define ANT_C		BIT(2)
+#define	ANT_AC		(ANT_A | ANT_C)
+#define ANT_BC		(ANT_B | ANT_C)
+#define ANT_ABC		(ANT_AB | ANT_C)
+
+static inline u8 num_of_ant(u8 mask)
+{
+	return  !!((mask) & ANT_A) +
+		!!((mask) & ANT_B) +
+		!!((mask) & ANT_C);
+}
+
+static inline u8 iwl4965_get_prev_ieee_rate(u8 rate_index)
+{
+	u8 rate = iwl_rates[rate_index].prev_ieee;
+
+	if (rate == IWL_RATE_INVALID)
+		rate = rate_index;
+	return rate;
+}
+
+/**
+ * iwl4965_rate_control_register - Register the rate control algorithm callbacks
+ *
+ * Since the rate control algorithm is hardware specific, there is no need
+ * or reason to place it as a stand alone module.  The driver can call
+ * iwl4965_rate_control_register in order to register the rate control callbacks
+ * with the mac80211 subsystem.  This should be performed prior to calling
+ * ieee80211_register_hw
+ *
+ */
+extern int iwlagn_rate_control_register(void);
+
+/**
+ * iwl4965_rate_control_unregister - Unregister the rate control callbacks
+ *
+ * This should be called after calling ieee80211_unregister_hw, but before
+ * the driver is unloaded.
+ */
+extern void iwlagn_rate_control_unregister(void);
+
+#endif /* __iwl_agn__rs__ */
diff --git a/drivers/net/wireless/iwlwifi/iwl-agn.c b/drivers/net/wireless/iwlwifi/iwl-agn.c
new file mode 100644
index 000000000000..e01f048a02dd
--- /dev/null
+++ b/drivers/net/wireless/iwlwifi/iwl-agn.c
@@ -0,0 +1,4534 @@
+/******************************************************************************
+ *
+ * Copyright(c) 2003 - 2008 Intel Corporation. All rights reserved.
+ *
+ * Portions of this file are derived from the ipw3945 project, as well
+ * as portions of the ieee80211 subsystem header files.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ * The full GNU General Public License is included in this distribution in the
+ * file called LICENSE.
+ *
+ * Contact Information:
+ * James P. Ketrenos <ipw2100-admin@linux.intel.com>
+ * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+ *
+ *****************************************************************************/
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/pci.h>
+#include <linux/dma-mapping.h>
+#include <linux/delay.h>
+#include <linux/skbuff.h>
+#include <linux/netdevice.h>
+#include <linux/wireless.h>
+#include <linux/firmware.h>
+#include <linux/etherdevice.h>
+#include <linux/if_arp.h>
+
+#include <net/mac80211.h>
+
+#include <asm/div64.h>
+
+#include "iwl-eeprom.h"
+#include "iwl-dev.h"
+#include "iwl-core.h"
+#include "iwl-io.h"
+#include "iwl-helpers.h"
+#include "iwl-sta.h"
+#include "iwl-calib.h"
+
+
+/******************************************************************************
+ *
+ * module boiler plate
+ *
+ ******************************************************************************/
+
+/*
+ * module name, copyright, version, etc.
+ * NOTE: DRV_NAME is defined in iwlwifi.h for use by iwl-debug.h and printk
+ */
+
+#define DRV_DESCRIPTION	"Intel(R) Wireless WiFi Link AGN driver for Linux"
+
+#ifdef CONFIG_IWLWIFI_DEBUG
+#define VD "d"
+#else
+#define VD
+#endif
+
+#ifdef CONFIG_IWLAGN_SPECTRUM_MEASUREMENT
+#define VS "s"
+#else
+#define VS
+#endif
+
+#define DRV_VERSION     IWLWIFI_VERSION VD VS
+
+
+MODULE_DESCRIPTION(DRV_DESCRIPTION);
+MODULE_VERSION(DRV_VERSION);
+MODULE_AUTHOR(DRV_COPYRIGHT);
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("iwl4965");
+
+/*************** STATION TABLE MANAGEMENT ****
+ * mac80211 should be examined to determine if sta_info is duplicating
+ * the functionality provided here
+ */
+
+/**************************************************************/
+
+
+
+static void iwl4965_set_rxon_hwcrypto(struct iwl_priv *priv, int hw_decrypt)
+{
+	struct iwl_rxon_cmd *rxon = &priv->staging_rxon;
+
+	if (hw_decrypt)
+		rxon->filter_flags &= ~RXON_FILTER_DIS_DECRYPT_MSK;
+	else
+		rxon->filter_flags |= RXON_FILTER_DIS_DECRYPT_MSK;
+
+}
+
+/**
+ * iwl4965_check_rxon_cmd - validate RXON structure is valid
+ *
+ * NOTE:  This is really only useful during development and can eventually
+ * be #ifdef'd out once the driver is stable and folks aren't actively
+ * making changes
+ */
+static int iwl4965_check_rxon_cmd(struct iwl_rxon_cmd *rxon)
+{
+	int error = 0;
+	int counter = 1;
+
+	if (rxon->flags & RXON_FLG_BAND_24G_MSK) {
+		error |= le32_to_cpu(rxon->flags &
+				(RXON_FLG_TGJ_NARROW_BAND_MSK |
+				 RXON_FLG_RADAR_DETECT_MSK));
+		if (error)
+			IWL_WARNING("check 24G fields %d | %d\n",
+				    counter++, error);
+	} else {
+		error |= (rxon->flags & RXON_FLG_SHORT_SLOT_MSK) ?
+				0 : le32_to_cpu(RXON_FLG_SHORT_SLOT_MSK);
+		if (error)
+			IWL_WARNING("check 52 fields %d | %d\n",
+				    counter++, error);
+		error |= le32_to_cpu(rxon->flags & RXON_FLG_CCK_MSK);
+		if (error)
+			IWL_WARNING("check 52 CCK %d | %d\n",
+				    counter++, error);
+	}
+	error |= (rxon->node_addr[0] | rxon->bssid_addr[0]) & 0x1;
+	if (error)
+		IWL_WARNING("check mac addr %d | %d\n", counter++, error);
+
+	/* make sure basic rates 6Mbps and 1Mbps are supported */
+	error |= (((rxon->ofdm_basic_rates & IWL_RATE_6M_MASK) == 0) &&
+		  ((rxon->cck_basic_rates & IWL_RATE_1M_MASK) == 0));
+	if (error)
+		IWL_WARNING("check basic rate %d | %d\n", counter++, error);
+
+	error |= (le16_to_cpu(rxon->assoc_id) > 2007);
+	if (error)
+		IWL_WARNING("check assoc id %d | %d\n", counter++, error);
+
+	error |= ((rxon->flags & (RXON_FLG_CCK_MSK | RXON_FLG_SHORT_SLOT_MSK))
+			== (RXON_FLG_CCK_MSK | RXON_FLG_SHORT_SLOT_MSK));
+	if (error)
+		IWL_WARNING("check CCK and short slot %d | %d\n",
+			    counter++, error);
+
+	error |= ((rxon->flags & (RXON_FLG_CCK_MSK | RXON_FLG_AUTO_DETECT_MSK))
+			== (RXON_FLG_CCK_MSK | RXON_FLG_AUTO_DETECT_MSK));
+	if (error)
+		IWL_WARNING("check CCK & auto detect %d | %d\n",
+			    counter++, error);
+
+	error |= ((rxon->flags & (RXON_FLG_AUTO_DETECT_MSK |
+			RXON_FLG_TGG_PROTECT_MSK)) == RXON_FLG_TGG_PROTECT_MSK);
+	if (error)
+		IWL_WARNING("check TGG and auto detect %d | %d\n",
+			    counter++, error);
+
+	if (error)
+		IWL_WARNING("Tuning to channel %d\n",
+			    le16_to_cpu(rxon->channel));
+
+	if (error) {
+		IWL_ERROR("Not a valid iwl4965_rxon_assoc_cmd field values\n");
+		return -1;
+	}
+	return 0;
+}
+
+/**
+ * iwl_full_rxon_required - check if full RXON (vs RXON_ASSOC) cmd is needed
+ * @priv: staging_rxon is compared to active_rxon
+ *
+ * If the RXON structure is changing enough to require a new tune,
+ * or is clearing the RXON_FILTER_ASSOC_MSK, then return 1 to indicate that
+ * a new tune (full RXON command, rather than RXON_ASSOC cmd) is required.
+ */
+static int iwl_full_rxon_required(struct iwl_priv *priv)
+{
+
+	/* These items are only settable from the full RXON command */
+	if (!(iwl_is_associated(priv)) ||
+	    compare_ether_addr(priv->staging_rxon.bssid_addr,
+			       priv->active_rxon.bssid_addr) ||
+	    compare_ether_addr(priv->staging_rxon.node_addr,
+			       priv->active_rxon.node_addr) ||
+	    compare_ether_addr(priv->staging_rxon.wlap_bssid_addr,
+			       priv->active_rxon.wlap_bssid_addr) ||
+	    (priv->staging_rxon.dev_type != priv->active_rxon.dev_type) ||
+	    (priv->staging_rxon.channel != priv->active_rxon.channel) ||
+	    (priv->staging_rxon.air_propagation !=
+	     priv->active_rxon.air_propagation) ||
+	    (priv->staging_rxon.ofdm_ht_single_stream_basic_rates !=
+	     priv->active_rxon.ofdm_ht_single_stream_basic_rates) ||
+	    (priv->staging_rxon.ofdm_ht_dual_stream_basic_rates !=
+	     priv->active_rxon.ofdm_ht_dual_stream_basic_rates) ||
+	    (priv->staging_rxon.assoc_id != priv->active_rxon.assoc_id))
+		return 1;
+
+	/* flags, filter_flags, ofdm_basic_rates, and cck_basic_rates can
+	 * be updated with the RXON_ASSOC command -- however only some
+	 * flag transitions are allowed using RXON_ASSOC */
+
+	/* Check if we are not switching bands */
+	if ((priv->staging_rxon.flags & RXON_FLG_BAND_24G_MSK) !=
+	    (priv->active_rxon.flags & RXON_FLG_BAND_24G_MSK))
+		return 1;
+
+	/* Check if we are switching association toggle */
+	if ((priv->staging_rxon.filter_flags & RXON_FILTER_ASSOC_MSK) !=
+		(priv->active_rxon.filter_flags & RXON_FILTER_ASSOC_MSK))
+		return 1;
+
+	return 0;
+}
+
+/**
+ * iwl4965_commit_rxon - commit staging_rxon to hardware
+ *
+ * The RXON command in staging_rxon is committed to the hardware and
+ * the active_rxon structure is updated with the new data.  This
+ * function correctly transitions out of the RXON_ASSOC_MSK state if
+ * a HW tune is required based on the RXON structure changes.
+ */
+static int iwl4965_commit_rxon(struct iwl_priv *priv)
+{
+	/* cast away the const for active_rxon in this function */
+	struct iwl_rxon_cmd *active_rxon = (void *)&priv->active_rxon;
+	DECLARE_MAC_BUF(mac);
+	int ret;
+	bool new_assoc =
+		!!(priv->staging_rxon.filter_flags & RXON_FILTER_ASSOC_MSK);
+
+	if (!iwl_is_alive(priv))
+		return -EBUSY;
+
+	/* always get timestamp with Rx frame */
+	priv->staging_rxon.flags |= RXON_FLG_TSF2HOST_MSK;
+	/* allow CTS-to-self if possible. this is relevant only for
+	 * 5000, but will not damage 4965 */
+	priv->staging_rxon.flags |= RXON_FLG_SELF_CTS_EN;
+
+	ret = iwl4965_check_rxon_cmd(&priv->staging_rxon);
+	if (ret) {
+		IWL_ERROR("Invalid RXON configuration.  Not committing.\n");
+		return -EINVAL;
+	}
+
+	/* If we don't need to send a full RXON, we can use
+	 * iwl4965_rxon_assoc_cmd which is used to reconfigure filter
+	 * and other flags for the current radio configuration. */
+	if (!iwl_full_rxon_required(priv)) {
+		ret = iwl_send_rxon_assoc(priv);
+		if (ret) {
+			IWL_ERROR("Error setting RXON_ASSOC (%d)\n", ret);
+			return ret;
+		}
+
+		memcpy(active_rxon, &priv->staging_rxon, sizeof(*active_rxon));
+		return 0;
+	}
+
+	/* station table will be cleared */
+	priv->assoc_station_added = 0;
+
+	/* If we are currently associated and the new config requires
+	 * an RXON_ASSOC and the new config wants the associated mask enabled,
+	 * we must clear the associated from the active configuration
+	 * before we apply the new config */
+	if (iwl_is_associated(priv) && new_assoc) {
+		IWL_DEBUG_INFO("Toggling associated bit on current RXON\n");
+		active_rxon->filter_flags &= ~RXON_FILTER_ASSOC_MSK;
+
+		ret = iwl_send_cmd_pdu(priv, REPLY_RXON,
+				      sizeof(struct iwl_rxon_cmd),
+				      &priv->active_rxon);
+
+		/* If the mask clearing failed then we set
+		 * active_rxon back to what it was previously */
+		if (ret) {
+			active_rxon->filter_flags |= RXON_FILTER_ASSOC_MSK;
+			IWL_ERROR("Error clearing ASSOC_MSK (%d)\n", ret);
+			return ret;
+		}
+	}
+
+	IWL_DEBUG_INFO("Sending RXON\n"
+		       "* with%s RXON_FILTER_ASSOC_MSK\n"
+		       "* channel = %d\n"
+		       "* bssid = %s\n",
+		       (new_assoc ? "" : "out"),
+		       le16_to_cpu(priv->staging_rxon.channel),
+		       print_mac(mac, priv->staging_rxon.bssid_addr));
+
+	iwl4965_set_rxon_hwcrypto(priv, !priv->hw_params.sw_crypto);
+
+	/* Apply the new configuration
+	 * RXON unassoc clears the station table in uCode, send it before
+	 * we add the bcast station. If assoc bit is set, we will send RXON
+	 * after having added the bcast and bssid station.
+	 */
+	if (!new_assoc) {
+		ret = iwl_send_cmd_pdu(priv, REPLY_RXON,
+			      sizeof(struct iwl_rxon_cmd), &priv->staging_rxon);
+		if (ret) {
+			IWL_ERROR("Error setting new RXON (%d)\n", ret);
+			return ret;
+		}
+		memcpy(active_rxon, &priv->staging_rxon, sizeof(*active_rxon));
+	}
+
+	iwl_clear_stations_table(priv);
+
+	if (!priv->error_recovering)
+		priv->start_calib = 0;
+
+	/* Add the broadcast address so we can send broadcast frames */
+	if (iwl_rxon_add_station(priv, iwl_bcast_addr, 0) ==
+						IWL_INVALID_STATION) {
+		IWL_ERROR("Error adding BROADCAST address for transmit.\n");
+		return -EIO;
+	}
+
+	/* If we have set the ASSOC_MSK and we are in BSS mode then
+	 * add the IWL_AP_ID to the station rate table */
+	if (new_assoc) {
+		if (priv->iw_mode == IEEE80211_IF_TYPE_STA) {
+			ret = iwl_rxon_add_station(priv,
+					   priv->active_rxon.bssid_addr, 1);
+			if (ret == IWL_INVALID_STATION) {
+				IWL_ERROR("Error adding AP address for TX.\n");
+				return -EIO;
+			}
+			priv->assoc_station_added = 1;
+			if (priv->default_wep_key &&
+			    iwl_send_static_wepkey_cmd(priv, 0))
+				IWL_ERROR("Could not send WEP static key.\n");
+		}
+
+		/* Apply the new configuration
+		 * RXON assoc doesn't clear the station table in uCode,
+		 */
+		ret = iwl_send_cmd_pdu(priv, REPLY_RXON,
+			      sizeof(struct iwl_rxon_cmd), &priv->staging_rxon);
+		if (ret) {
+			IWL_ERROR("Error setting new RXON (%d)\n", ret);
+			return ret;
+		}
+		memcpy(active_rxon, &priv->staging_rxon, sizeof(*active_rxon));
+	}
+
+	iwl_init_sensitivity(priv);
+
+	/* If we issue a new RXON command which required a tune then we must
+	 * send a new TXPOWER command or we won't be able to Tx any frames */
+	ret = iwl_set_tx_power(priv, priv->tx_power_user_lmt, true);
+	if (ret) {
+		IWL_ERROR("Error sending TX power (%d)\n", ret);
+		return ret;
+	}
+
+	return 0;
+}
+
+void iwl4965_update_chain_flags(struct iwl_priv *priv)
+{
+
+	iwl_set_rxon_chain(priv);
+	iwl4965_commit_rxon(priv);
+}
+
+static int iwl4965_send_bt_config(struct iwl_priv *priv)
+{
+	struct iwl4965_bt_cmd bt_cmd = {
+		.flags = 3,
+		.lead_time = 0xAA,
+		.max_kill = 1,
+		.kill_ack_mask = 0,
+		.kill_cts_mask = 0,
+	};
+
+	return iwl_send_cmd_pdu(priv, REPLY_BT_CONFIG,
+				sizeof(struct iwl4965_bt_cmd), &bt_cmd);
+}
+
+static void iwl_clear_free_frames(struct iwl_priv *priv)
+{
+	struct list_head *element;
+
+	IWL_DEBUG_INFO("%d frames on pre-allocated heap on clear.\n",
+		       priv->frames_count);
+
+	while (!list_empty(&priv->free_frames)) {
+		element = priv->free_frames.next;
+		list_del(element);
+		kfree(list_entry(element, struct iwl_frame, list));
+		priv->frames_count--;
+	}
+
+	if (priv->frames_count) {
+		IWL_WARNING("%d frames still in use.  Did we lose one?\n",
+			    priv->frames_count);
+		priv->frames_count = 0;
+	}
+}
+
+static struct iwl_frame *iwl_get_free_frame(struct iwl_priv *priv)
+{
+	struct iwl_frame *frame;
+	struct list_head *element;
+	if (list_empty(&priv->free_frames)) {
+		frame = kzalloc(sizeof(*frame), GFP_KERNEL);
+		if (!frame) {
+			IWL_ERROR("Could not allocate frame!\n");
+			return NULL;
+		}
+
+		priv->frames_count++;
+		return frame;
+	}
+
+	element = priv->free_frames.next;
+	list_del(element);
+	return list_entry(element, struct iwl_frame, list);
+}
+
+static void iwl_free_frame(struct iwl_priv *priv, struct iwl_frame *frame)
+{
+	memset(frame, 0, sizeof(*frame));
+	list_add(&frame->list, &priv->free_frames);
+}
+
+static unsigned int iwl_fill_beacon_frame(struct iwl_priv *priv,
+					  struct ieee80211_hdr *hdr,
+					  const u8 *dest, int left)
+{
+	if (!iwl_is_associated(priv) || !priv->ibss_beacon ||
+	    ((priv->iw_mode != IEEE80211_IF_TYPE_IBSS) &&
+	     (priv->iw_mode != IEEE80211_IF_TYPE_AP)))
+		return 0;
+
+	if (priv->ibss_beacon->len > left)
+		return 0;
+
+	memcpy(hdr, priv->ibss_beacon->data, priv->ibss_beacon->len);
+
+	return priv->ibss_beacon->len;
+}
+
+static u8 iwl4965_rate_get_lowest_plcp(struct iwl_priv *priv)
+{
+	int i;
+	int rate_mask;
+
+	/* Set rate mask*/
+	if (priv->staging_rxon.flags & RXON_FLG_BAND_24G_MSK)
+		rate_mask = priv->active_rate_basic & 0xF;
+	else
+		rate_mask = priv->active_rate_basic & 0xFF0;
+
+	/* Find lowest valid rate */
+	for (i = IWL_RATE_1M_INDEX; i != IWL_RATE_INVALID;
+					i = iwl_rates[i].next_ieee) {
+		if (rate_mask & (1 << i))
+			return iwl_rates[i].plcp;
+	}
+
+	/* No valid rate was found. Assign the lowest one */
+	if (priv->staging_rxon.flags & RXON_FLG_BAND_24G_MSK)
+		return IWL_RATE_1M_PLCP;
+	else
+		return IWL_RATE_6M_PLCP;
+}
+
+unsigned int iwl4965_hw_get_beacon_cmd(struct iwl_priv *priv,
+				       struct iwl_frame *frame, u8 rate)
+{
+	struct iwl_tx_beacon_cmd *tx_beacon_cmd;
+	unsigned int frame_size;
+
+	tx_beacon_cmd = &frame->u.beacon;
+	memset(tx_beacon_cmd, 0, sizeof(*tx_beacon_cmd));
+
+	tx_beacon_cmd->tx.sta_id = priv->hw_params.bcast_sta_id;
+	tx_beacon_cmd->tx.stop_time.life_time = TX_CMD_LIFE_TIME_INFINITE;
+
+	frame_size = iwl_fill_beacon_frame(priv, tx_beacon_cmd->frame,
+				iwl_bcast_addr,
+				sizeof(frame->u) - sizeof(*tx_beacon_cmd));
+
+	BUG_ON(frame_size > MAX_MPDU_SIZE);
+	tx_beacon_cmd->tx.len = cpu_to_le16((u16)frame_size);
+
+	if ((rate == IWL_RATE_1M_PLCP) || (rate >= IWL_RATE_2M_PLCP))
+		tx_beacon_cmd->tx.rate_n_flags =
+			iwl_hw_set_rate_n_flags(rate, RATE_MCS_CCK_MSK);
+	else
+		tx_beacon_cmd->tx.rate_n_flags =
+			iwl_hw_set_rate_n_flags(rate, 0);
+
+	tx_beacon_cmd->tx.tx_flags = TX_CMD_FLG_SEQ_CTL_MSK |
+				     TX_CMD_FLG_TSF_MSK |
+				     TX_CMD_FLG_STA_RATE_MSK;
+
+	return sizeof(*tx_beacon_cmd) + frame_size;
+}
+static int iwl4965_send_beacon_cmd(struct iwl_priv *priv)
+{
+	struct iwl_frame *frame;
+	unsigned int frame_size;
+	int rc;
+	u8 rate;
+
+	frame = iwl_get_free_frame(priv);
+
+	if (!frame) {
+		IWL_ERROR("Could not obtain free frame buffer for beacon "
+			  "command.\n");
+		return -ENOMEM;
+	}
+
+	rate = iwl4965_rate_get_lowest_plcp(priv);
+
+	frame_size = iwl4965_hw_get_beacon_cmd(priv, frame, rate);
+
+	rc = iwl_send_cmd_pdu(priv, REPLY_TX_BEACON, frame_size,
+			      &frame->u.cmd[0]);
+
+	iwl_free_frame(priv, frame);
+
+	return rc;
+}
+
+/******************************************************************************
+ *
+ * Misc. internal state and helper functions
+ *
+ ******************************************************************************/
+
+static void iwl4965_ht_conf(struct iwl_priv *priv,
+			    struct ieee80211_bss_conf *bss_conf)
+{
+	struct ieee80211_ht_info *ht_conf = bss_conf->ht_conf;
+	struct ieee80211_ht_bss_info *ht_bss_conf = bss_conf->ht_bss_conf;
+	struct iwl_ht_info *iwl_conf = &priv->current_ht_config;
+
+	IWL_DEBUG_MAC80211("enter: \n");
+
+	iwl_conf->is_ht = bss_conf->assoc_ht;
+
+	if (!iwl_conf->is_ht)
+		return;
+
+	priv->ps_mode = (u8)((ht_conf->cap & IEEE80211_HT_CAP_MIMO_PS) >> 2);
+
+	if (ht_conf->cap & IEEE80211_HT_CAP_SGI_20)
+		iwl_conf->sgf |= HT_SHORT_GI_20MHZ;
+	if (ht_conf->cap & IEEE80211_HT_CAP_SGI_40)
+		iwl_conf->sgf |= HT_SHORT_GI_40MHZ;
+
+	iwl_conf->is_green_field = !!(ht_conf->cap & IEEE80211_HT_CAP_GRN_FLD);
+	iwl_conf->max_amsdu_size =
+		!!(ht_conf->cap & IEEE80211_HT_CAP_MAX_AMSDU);
+
+	iwl_conf->supported_chan_width =
+		!!(ht_conf->cap & IEEE80211_HT_CAP_SUP_WIDTH);
+	iwl_conf->extension_chan_offset =
+		ht_bss_conf->bss_cap & IEEE80211_HT_IE_CHA_SEC_OFFSET;
+	/* If no above or below channel supplied disable FAT channel */
+	if (iwl_conf->extension_chan_offset != IEEE80211_HT_IE_CHA_SEC_ABOVE &&
+	    iwl_conf->extension_chan_offset != IEEE80211_HT_IE_CHA_SEC_BELOW) {
+		iwl_conf->extension_chan_offset = IEEE80211_HT_IE_CHA_SEC_NONE;
+		iwl_conf->supported_chan_width = 0;
+	}
+
+	memcpy(iwl_conf->supp_mcs_set, ht_conf->supp_mcs_set, 16);
+
+	iwl_conf->control_channel = ht_bss_conf->primary_channel;
+	iwl_conf->tx_chan_width =
+		!!(ht_bss_conf->bss_cap & IEEE80211_HT_IE_CHA_WIDTH);
+	iwl_conf->ht_protection =
+		ht_bss_conf->bss_op_mode & IEEE80211_HT_IE_HT_PROTECTION;
+	iwl_conf->non_GF_STA_present =
+		!!(ht_bss_conf->bss_op_mode & IEEE80211_HT_IE_NON_GF_STA_PRSNT);
+
+	IWL_DEBUG_MAC80211("control channel %d\n", iwl_conf->control_channel);
+	IWL_DEBUG_MAC80211("leave\n");
+}
+
+/*
+ * QoS  support
+*/
+static void iwl_activate_qos(struct iwl_priv *priv, u8 force)
+{
+	if (test_bit(STATUS_EXIT_PENDING, &priv->status))
+		return;
+
+	if (!priv->qos_data.qos_enable)
+		return;
+
+	priv->qos_data.def_qos_parm.qos_flags = 0;
+
+	if (priv->qos_data.qos_cap.q_AP.queue_request &&
+	    !priv->qos_data.qos_cap.q_AP.txop_request)
+		priv->qos_data.def_qos_parm.qos_flags |=
+			QOS_PARAM_FLG_TXOP_TYPE_MSK;
+	if (priv->qos_data.qos_active)
+		priv->qos_data.def_qos_parm.qos_flags |=
+			QOS_PARAM_FLG_UPDATE_EDCA_MSK;
+
+	if (priv->current_ht_config.is_ht)
+		priv->qos_data.def_qos_parm.qos_flags |= QOS_PARAM_FLG_TGN_MSK;
+
+	if (force || iwl_is_associated(priv)) {
+		IWL_DEBUG_QOS("send QoS cmd with Qos active=%d FLAGS=0x%X\n",
+				priv->qos_data.qos_active,
+				priv->qos_data.def_qos_parm.qos_flags);
+
+		iwl_send_cmd_pdu_async(priv, REPLY_QOS_PARAM,
+				       sizeof(struct iwl_qosparam_cmd),
+				       &priv->qos_data.def_qos_parm, NULL);
+	}
+}
+
+#define MAX_UCODE_BEACON_INTERVAL	4096
+
+static __le16 iwl4965_adjust_beacon_interval(u16 beacon_val)
+{
+	u16 new_val = 0;
+	u16 beacon_factor = 0;
+
+	beacon_factor =
+	    (beacon_val + MAX_UCODE_BEACON_INTERVAL)
+		/ MAX_UCODE_BEACON_INTERVAL;
+	new_val = beacon_val / beacon_factor;
+
+	return cpu_to_le16(new_val);
+}
+
+static void iwl4965_setup_rxon_timing(struct iwl_priv *priv)
+{
+	u64 interval_tm_unit;
+	u64 tsf, result;
+	unsigned long flags;
+	struct ieee80211_conf *conf = NULL;
+	u16 beacon_int = 0;
+
+	conf = ieee80211_get_hw_conf(priv->hw);
+
+	spin_lock_irqsave(&priv->lock, flags);
+	priv->rxon_timing.timestamp.dw[1] = cpu_to_le32(priv->timestamp >> 32);
+	priv->rxon_timing.timestamp.dw[0] =
+				cpu_to_le32(priv->timestamp & 0xFFFFFFFF);
+
+	priv->rxon_timing.listen_interval = cpu_to_le16(conf->listen_interval);
+
+	tsf = priv->timestamp;
+
+	beacon_int = priv->beacon_int;
+	spin_unlock_irqrestore(&priv->lock, flags);
+
+	if (priv->iw_mode == IEEE80211_IF_TYPE_STA) {
+		if (beacon_int == 0) {
+			priv->rxon_timing.beacon_interval = cpu_to_le16(100);
+			priv->rxon_timing.beacon_init_val = cpu_to_le32(102400);
+		} else {
+			priv->rxon_timing.beacon_interval =
+				cpu_to_le16(beacon_int);
+			priv->rxon_timing.beacon_interval =
+			    iwl4965_adjust_beacon_interval(
+				le16_to_cpu(priv->rxon_timing.beacon_interval));
+		}
+
+		priv->rxon_timing.atim_window = 0;
+	} else {
+		priv->rxon_timing.beacon_interval =
+			iwl4965_adjust_beacon_interval(conf->beacon_int);
+		/* TODO: we need to get atim_window from upper stack
+		 * for now we set to 0 */
+		priv->rxon_timing.atim_window = 0;
+	}
+
+	interval_tm_unit =
+		(le16_to_cpu(priv->rxon_timing.beacon_interval) * 1024);
+	result = do_div(tsf, interval_tm_unit);
+	priv->rxon_timing.beacon_init_val =
+	    cpu_to_le32((u32) ((u64) interval_tm_unit - result));
+
+	IWL_DEBUG_ASSOC
+	    ("beacon interval %d beacon timer %d beacon tim %d\n",
+		le16_to_cpu(priv->rxon_timing.beacon_interval),
+		le32_to_cpu(priv->rxon_timing.beacon_init_val),
+		le16_to_cpu(priv->rxon_timing.atim_window));
+}
+
+static void iwl_set_flags_for_band(struct iwl_priv *priv,
+				   enum ieee80211_band band)
+{
+	if (band == IEEE80211_BAND_5GHZ) {
+		priv->staging_rxon.flags &=
+		    ~(RXON_FLG_BAND_24G_MSK | RXON_FLG_AUTO_DETECT_MSK
+		      | RXON_FLG_CCK_MSK);
+		priv->staging_rxon.flags |= RXON_FLG_SHORT_SLOT_MSK;
+	} else {
+		/* Copied from iwl4965_post_associate() */
+		if (priv->assoc_capability & WLAN_CAPABILITY_SHORT_SLOT_TIME)
+			priv->staging_rxon.flags |= RXON_FLG_SHORT_SLOT_MSK;
+		else
+			priv->staging_rxon.flags &= ~RXON_FLG_SHORT_SLOT_MSK;
+
+		if (priv->iw_mode == IEEE80211_IF_TYPE_IBSS)
+			priv->staging_rxon.flags &= ~RXON_FLG_SHORT_SLOT_MSK;
+
+		priv->staging_rxon.flags |= RXON_FLG_BAND_24G_MSK;
+		priv->staging_rxon.flags |= RXON_FLG_AUTO_DETECT_MSK;
+		priv->staging_rxon.flags &= ~RXON_FLG_CCK_MSK;
+	}
+}
+
+/*
+ * initialize rxon structure with default values from eeprom
+ */
+static void iwl4965_connection_init_rx_config(struct iwl_priv *priv)
+{
+	const struct iwl_channel_info *ch_info;
+
+	memset(&priv->staging_rxon, 0, sizeof(priv->staging_rxon));
+
+	switch (priv->iw_mode) {
+	case IEEE80211_IF_TYPE_AP:
+		priv->staging_rxon.dev_type = RXON_DEV_TYPE_AP;
+		break;
+
+	case IEEE80211_IF_TYPE_STA:
+		priv->staging_rxon.dev_type = RXON_DEV_TYPE_ESS;
+		priv->staging_rxon.filter_flags = RXON_FILTER_ACCEPT_GRP_MSK;
+		break;
+
+	case IEEE80211_IF_TYPE_IBSS:
+		priv->staging_rxon.dev_type = RXON_DEV_TYPE_IBSS;
+		priv->staging_rxon.flags = RXON_FLG_SHORT_PREAMBLE_MSK;
+		priv->staging_rxon.filter_flags = RXON_FILTER_BCON_AWARE_MSK |
+						  RXON_FILTER_ACCEPT_GRP_MSK;
+		break;
+
+	case IEEE80211_IF_TYPE_MNTR:
+		priv->staging_rxon.dev_type = RXON_DEV_TYPE_SNIFFER;
+		priv->staging_rxon.filter_flags = RXON_FILTER_PROMISC_MSK |
+		    RXON_FILTER_CTL2HOST_MSK | RXON_FILTER_ACCEPT_GRP_MSK;
+		break;
+	default:
+		IWL_ERROR("Unsupported interface type %d\n", priv->iw_mode);
+		break;
+	}
+
+#if 0
+	/* TODO:  Figure out when short_preamble would be set and cache from
+	 * that */
+	if (!hw_to_local(priv->hw)->short_preamble)
+		priv->staging_rxon.flags &= ~RXON_FLG_SHORT_PREAMBLE_MSK;
+	else
+		priv->staging_rxon.flags |= RXON_FLG_SHORT_PREAMBLE_MSK;
+#endif
+
+	ch_info = iwl_get_channel_info(priv, priv->band,
+				       le16_to_cpu(priv->active_rxon.channel));
+
+	if (!ch_info)
+		ch_info = &priv->channel_info[0];
+
+	/*
+	 * in some case A channels are all non IBSS
+	 * in this case force B/G channel
+	 */
+	if ((priv->iw_mode == IEEE80211_IF_TYPE_IBSS) &&
+	    !(is_channel_ibss(ch_info)))
+		ch_info = &priv->channel_info[0];
+
+	priv->staging_rxon.channel = cpu_to_le16(ch_info->channel);
+	priv->band = ch_info->band;
+
+	iwl_set_flags_for_band(priv, priv->band);
+
+	priv->staging_rxon.ofdm_basic_rates =
+	    (IWL_OFDM_RATES_MASK >> IWL_FIRST_OFDM_RATE) & 0xFF;
+	priv->staging_rxon.cck_basic_rates =
+	    (IWL_CCK_RATES_MASK >> IWL_FIRST_CCK_RATE) & 0xF;
+
+	priv->staging_rxon.flags &= ~(RXON_FLG_CHANNEL_MODE_MIXED_MSK |
+					RXON_FLG_CHANNEL_MODE_PURE_40_MSK);
+	memcpy(priv->staging_rxon.node_addr, priv->mac_addr, ETH_ALEN);
+	memcpy(priv->staging_rxon.wlap_bssid_addr, priv->mac_addr, ETH_ALEN);
+	priv->staging_rxon.ofdm_ht_single_stream_basic_rates = 0xff;
+	priv->staging_rxon.ofdm_ht_dual_stream_basic_rates = 0xff;
+	iwl_set_rxon_chain(priv);
+}
+
+static int iwl4965_set_mode(struct iwl_priv *priv, int mode)
+{
+	priv->iw_mode = mode;
+
+	iwl4965_connection_init_rx_config(priv);
+	memcpy(priv->staging_rxon.node_addr, priv->mac_addr, ETH_ALEN);
+
+	iwl_clear_stations_table(priv);
+
+	/* dont commit rxon if rf-kill is on*/
+	if (!iwl_is_ready_rf(priv))
+		return -EAGAIN;
+
+	cancel_delayed_work(&priv->scan_check);
+	if (iwl_scan_cancel_timeout(priv, 100)) {
+		IWL_WARNING("Aborted scan still in progress after 100ms\n");
+		IWL_DEBUG_MAC80211("leaving - scan abort failed.\n");
+		return -EAGAIN;
+	}
+
+	iwl4965_commit_rxon(priv);
+
+	return 0;
+}
+
+static void iwl4965_set_rate(struct iwl_priv *priv)
+{
+	const struct ieee80211_supported_band *hw = NULL;
+	struct ieee80211_rate *rate;
+	int i;
+
+	hw = iwl_get_hw_mode(priv, priv->band);
+	if (!hw) {
+		IWL_ERROR("Failed to set rate: unable to get hw mode\n");
+		return;
+	}
+
+	priv->active_rate = 0;
+	priv->active_rate_basic = 0;
+
+	for (i = 0; i < hw->n_bitrates; i++) {
+		rate = &(hw->bitrates[i]);
+		if (rate->hw_value < IWL_RATE_COUNT)
+			priv->active_rate |= (1 << rate->hw_value);
+	}
+
+	IWL_DEBUG_RATE("Set active_rate = %0x, active_rate_basic = %0x\n",
+		       priv->active_rate, priv->active_rate_basic);
+
+	/*
+	 * If a basic rate is configured, then use it (adding IWL_RATE_1M_MASK)
+	 * otherwise set it to the default of all CCK rates and 6, 12, 24 for
+	 * OFDM
+	 */
+	if (priv->active_rate_basic & IWL_CCK_BASIC_RATES_MASK)
+		priv->staging_rxon.cck_basic_rates =
+		    ((priv->active_rate_basic &
+		      IWL_CCK_RATES_MASK) >> IWL_FIRST_CCK_RATE) & 0xF;
+	else
+		priv->staging_rxon.cck_basic_rates =
+		    (IWL_CCK_BASIC_RATES_MASK >> IWL_FIRST_CCK_RATE) & 0xF;
+
+	if (priv->active_rate_basic & IWL_OFDM_BASIC_RATES_MASK)
+		priv->staging_rxon.ofdm_basic_rates =
+		    ((priv->active_rate_basic &
+		      (IWL_OFDM_BASIC_RATES_MASK | IWL_RATE_6M_MASK)) >>
+		      IWL_FIRST_OFDM_RATE) & 0xFF;
+	else
+		priv->staging_rxon.ofdm_basic_rates =
+		   (IWL_OFDM_BASIC_RATES_MASK >> IWL_FIRST_OFDM_RATE) & 0xFF;
+}
+
+#ifdef CONFIG_IWLAGN_SPECTRUM_MEASUREMENT
+
+#include "iwl-spectrum.h"
+
+#define BEACON_TIME_MASK_LOW	0x00FFFFFF
+#define BEACON_TIME_MASK_HIGH	0xFF000000
+#define TIME_UNIT		1024
+
+/*
+ * extended beacon time format
+ * time in usec will be changed into a 32-bit value in 8:24 format
+ * the high 1 byte is the beacon counts
+ * the lower 3 bytes is the time in usec within one beacon interval
+ */
+
+static u32 iwl4965_usecs_to_beacons(u32 usec, u32 beacon_interval)
+{
+	u32 quot;
+	u32 rem;
+	u32 interval = beacon_interval * 1024;
+
+	if (!interval || !usec)
+		return 0;
+
+	quot = (usec / interval) & (BEACON_TIME_MASK_HIGH >> 24);
+	rem = (usec % interval) & BEACON_TIME_MASK_LOW;
+
+	return (quot << 24) + rem;
+}
+
+/* base is usually what we get from ucode with each received frame,
+ * the same as HW timer counter counting down
+ */
+
+static __le32 iwl4965_add_beacon_time(u32 base, u32 addon, u32 beacon_interval)
+{
+	u32 base_low = base & BEACON_TIME_MASK_LOW;
+	u32 addon_low = addon & BEACON_TIME_MASK_LOW;
+	u32 interval = beacon_interval * TIME_UNIT;
+	u32 res = (base & BEACON_TIME_MASK_HIGH) +
+	    (addon & BEACON_TIME_MASK_HIGH);
+
+	if (base_low > addon_low)
+		res += base_low - addon_low;
+	else if (base_low < addon_low) {
+		res += interval + base_low - addon_low;
+		res += (1 << 24);
+	} else
+		res += (1 << 24);
+
+	return cpu_to_le32(res);
+}
+
+static int iwl4965_get_measurement(struct iwl_priv *priv,
+			       struct ieee80211_measurement_params *params,
+			       u8 type)
+{
+	struct iwl4965_spectrum_cmd spectrum;
+	struct iwl_rx_packet *res;
+	struct iwl_host_cmd cmd = {
+		.id = REPLY_SPECTRUM_MEASUREMENT_CMD,
+		.data = (void *)&spectrum,
+		.meta.flags = CMD_WANT_SKB,
+	};
+	u32 add_time = le64_to_cpu(params->start_time);
+	int rc;
+	int spectrum_resp_status;
+	int duration = le16_to_cpu(params->duration);
+
+	if (iwl_is_associated(priv))
+		add_time =
+		    iwl4965_usecs_to_beacons(
+			le64_to_cpu(params->start_time) - priv->last_tsf,
+			le16_to_cpu(priv->rxon_timing.beacon_interval));
+
+	memset(&spectrum, 0, sizeof(spectrum));
+
+	spectrum.channel_count = cpu_to_le16(1);
+	spectrum.flags =
+	    RXON_FLG_TSF2HOST_MSK | RXON_FLG_ANT_A_MSK | RXON_FLG_DIS_DIV_MSK;
+	spectrum.filter_flags = MEASUREMENT_FILTER_FLAG;
+	cmd.len = sizeof(spectrum);
+	spectrum.len = cpu_to_le16(cmd.len - sizeof(spectrum.len));
+
+	if (iwl_is_associated(priv))
+		spectrum.start_time =
+		    iwl4965_add_beacon_time(priv->last_beacon_time,
+				add_time,
+				le16_to_cpu(priv->rxon_timing.beacon_interval));
+	else
+		spectrum.start_time = 0;
+
+	spectrum.channels[0].duration = cpu_to_le32(duration * TIME_UNIT);
+	spectrum.channels[0].channel = params->channel;
+	spectrum.channels[0].type = type;
+	if (priv->active_rxon.flags & RXON_FLG_BAND_24G_MSK)
+		spectrum.flags |= RXON_FLG_BAND_24G_MSK |
+		    RXON_FLG_AUTO_DETECT_MSK | RXON_FLG_TGG_PROTECT_MSK;
+
+	rc = iwl_send_cmd_sync(priv, &cmd);
+	if (rc)
+		return rc;
+
+	res = (struct iwl_rx_packet *)cmd.meta.u.skb->data;
+	if (res->hdr.flags & IWL_CMD_FAILED_MSK) {
+		IWL_ERROR("Bad return from REPLY_RX_ON_ASSOC command\n");
+		rc = -EIO;
+	}
+
+	spectrum_resp_status = le16_to_cpu(res->u.spectrum.status);
+	switch (spectrum_resp_status) {
+	case 0:		/* Command will be handled */
+		if (res->u.spectrum.id != 0xff) {
+			IWL_DEBUG_INFO
+			    ("Replaced existing measurement: %d\n",
+			     res->u.spectrum.id);
+			priv->measurement_status &= ~MEASUREMENT_READY;
+		}
+		priv->measurement_status |= MEASUREMENT_ACTIVE;
+		rc = 0;
+		break;
+
+	case 1:		/* Command will not be handled */
+		rc = -EAGAIN;
+		break;
+	}
+
+	dev_kfree_skb_any(cmd.meta.u.skb);
+
+	return rc;
+}
+#endif
+
+/******************************************************************************
+ *
+ * Generic RX handler implementations
+ *
+ ******************************************************************************/
+static void iwl_rx_reply_alive(struct iwl_priv *priv,
+				struct iwl_rx_mem_buffer *rxb)
+{
+	struct iwl_rx_packet *pkt = (struct iwl_rx_packet *)rxb->skb->data;
+	struct iwl_alive_resp *palive;
+	struct delayed_work *pwork;
+
+	palive = &pkt->u.alive_frame;
+
+	IWL_DEBUG_INFO("Alive ucode status 0x%08X revision "
+		       "0x%01X 0x%01X\n",
+		       palive->is_valid, palive->ver_type,
+		       palive->ver_subtype);
+
+	if (palive->ver_subtype == INITIALIZE_SUBTYPE) {
+		IWL_DEBUG_INFO("Initialization Alive received.\n");
+		memcpy(&priv->card_alive_init,
+		       &pkt->u.alive_frame,
+		       sizeof(struct iwl_init_alive_resp));
+		pwork = &priv->init_alive_start;
+	} else {
+		IWL_DEBUG_INFO("Runtime Alive received.\n");
+		memcpy(&priv->card_alive, &pkt->u.alive_frame,
+		       sizeof(struct iwl_alive_resp));
+		pwork = &priv->alive_start;
+	}
+
+	/* We delay the ALIVE response by 5ms to
+	 * give the HW RF Kill time to activate... */
+	if (palive->is_valid == UCODE_VALID_OK)
+		queue_delayed_work(priv->workqueue, pwork,
+				   msecs_to_jiffies(5));
+	else
+		IWL_WARNING("uCode did not respond OK.\n");
+}
+
+static void iwl4965_rx_reply_error(struct iwl_priv *priv,
+				   struct iwl_rx_mem_buffer *rxb)
+{
+	struct iwl_rx_packet *pkt = (struct iwl_rx_packet *)rxb->skb->data;
+
+	IWL_ERROR("Error Reply type 0x%08X cmd %s (0x%02X) "
+		"seq 0x%04X ser 0x%08X\n",
+		le32_to_cpu(pkt->u.err_resp.error_type),
+		get_cmd_string(pkt->u.err_resp.cmd_id),
+		pkt->u.err_resp.cmd_id,
+		le16_to_cpu(pkt->u.err_resp.bad_cmd_seq_num),
+		le32_to_cpu(pkt->u.err_resp.error_info));
+}
+
+#define TX_STATUS_ENTRY(x) case TX_STATUS_FAIL_ ## x: return #x
+
+static void iwl4965_rx_csa(struct iwl_priv *priv, struct iwl_rx_mem_buffer *rxb)
+{
+	struct iwl_rx_packet *pkt = (struct iwl_rx_packet *)rxb->skb->data;
+	struct iwl_rxon_cmd *rxon = (void *)&priv->active_rxon;
+	struct iwl4965_csa_notification *csa = &(pkt->u.csa_notif);
+	IWL_DEBUG_11H("CSA notif: channel %d, status %d\n",
+		      le16_to_cpu(csa->channel), le32_to_cpu(csa->status));
+	rxon->channel = csa->channel;
+	priv->staging_rxon.channel = csa->channel;
+}
+
+static void iwl4965_rx_spectrum_measure_notif(struct iwl_priv *priv,
+					  struct iwl_rx_mem_buffer *rxb)
+{
+#ifdef CONFIG_IWLAGN_SPECTRUM_MEASUREMENT
+	struct iwl_rx_packet *pkt = (struct iwl_rx_packet *)rxb->skb->data;
+	struct iwl4965_spectrum_notification *report = &(pkt->u.spectrum_notif);
+
+	if (!report->state) {
+		IWL_DEBUG(IWL_DL_11H,
+			"Spectrum Measure Notification: Start\n");
+		return;
+	}
+
+	memcpy(&priv->measure_report, report, sizeof(*report));
+	priv->measurement_status |= MEASUREMENT_READY;
+#endif
+}
+
+static void iwl4965_rx_pm_sleep_notif(struct iwl_priv *priv,
+				      struct iwl_rx_mem_buffer *rxb)
+{
+#ifdef CONFIG_IWLWIFI_DEBUG
+	struct iwl_rx_packet *pkt = (struct iwl_rx_packet *)rxb->skb->data;
+	struct iwl4965_sleep_notification *sleep = &(pkt->u.sleep_notif);
+	IWL_DEBUG_RX("sleep mode: %d, src: %d\n",
+		     sleep->pm_sleep_mode, sleep->pm_wakeup_src);
+#endif
+}
+
+static void iwl4965_rx_pm_debug_statistics_notif(struct iwl_priv *priv,
+					     struct iwl_rx_mem_buffer *rxb)
+{
+	struct iwl_rx_packet *pkt = (struct iwl_rx_packet *)rxb->skb->data;
+	IWL_DEBUG_RADIO("Dumping %d bytes of unhandled "
+			"notification for %s:\n",
+			le32_to_cpu(pkt->len), get_cmd_string(pkt->hdr.cmd));
+	iwl_print_hex_dump(priv, IWL_DL_RADIO, pkt->u.raw, le32_to_cpu(pkt->len));
+}
+
+static void iwl4965_bg_beacon_update(struct work_struct *work)
+{
+	struct iwl_priv *priv =
+		container_of(work, struct iwl_priv, beacon_update);
+	struct sk_buff *beacon;
+
+	/* Pull updated AP beacon from mac80211. will fail if not in AP mode */
+	beacon = ieee80211_beacon_get(priv->hw, priv->vif);
+
+	if (!beacon) {
+		IWL_ERROR("update beacon failed\n");
+		return;
+	}
+
+	mutex_lock(&priv->mutex);
+	/* new beacon skb is allocated every time; dispose previous.*/
+	if (priv->ibss_beacon)
+		dev_kfree_skb(priv->ibss_beacon);
+
+	priv->ibss_beacon = beacon;
+	mutex_unlock(&priv->mutex);
+
+	iwl4965_send_beacon_cmd(priv);
+}
+
+/**
+ * iwl4965_bg_statistics_periodic - Timer callback to queue statistics
+ *
+ * This callback is provided in order to send a statistics request.
+ *
+ * This timer function is continually reset to execute within
+ * REG_RECALIB_PERIOD seconds since the last STATISTICS_NOTIFICATION
+ * was received.  We need to ensure we receive the statistics in order
+ * to update the temperature used for calibrating the TXPOWER.
+ */
+static void iwl4965_bg_statistics_periodic(unsigned long data)
+{
+	struct iwl_priv *priv = (struct iwl_priv *)data;
+
+	if (test_bit(STATUS_EXIT_PENDING, &priv->status))
+		return;
+
+	iwl_send_statistics_request(priv, CMD_ASYNC);
+}
+
+static void iwl4965_rx_beacon_notif(struct iwl_priv *priv,
+				struct iwl_rx_mem_buffer *rxb)
+{
+#ifdef CONFIG_IWLWIFI_DEBUG
+	struct iwl_rx_packet *pkt = (struct iwl_rx_packet *)rxb->skb->data;
+	struct iwl4965_beacon_notif *beacon = &(pkt->u.beacon_status);
+	u8 rate = iwl_hw_get_rate(beacon->beacon_notify_hdr.rate_n_flags);
+
+	IWL_DEBUG_RX("beacon status %x retries %d iss %d "
+		"tsf %d %d rate %d\n",
+		le32_to_cpu(beacon->beacon_notify_hdr.u.status) & TX_STATUS_MSK,
+		beacon->beacon_notify_hdr.failure_frame,
+		le32_to_cpu(beacon->ibss_mgr_status),
+		le32_to_cpu(beacon->high_tsf),
+		le32_to_cpu(beacon->low_tsf), rate);
+#endif
+
+	if ((priv->iw_mode == IEEE80211_IF_TYPE_AP) &&
+	    (!test_bit(STATUS_EXIT_PENDING, &priv->status)))
+		queue_work(priv->workqueue, &priv->beacon_update);
+}
+
+/* Handle notification from uCode that card's power state is changing
+ * due to software, hardware, or critical temperature RFKILL */
+static void iwl4965_rx_card_state_notif(struct iwl_priv *priv,
+				    struct iwl_rx_mem_buffer *rxb)
+{
+	struct iwl_rx_packet *pkt = (struct iwl_rx_packet *)rxb->skb->data;
+	u32 flags = le32_to_cpu(pkt->u.card_state_notif.flags);
+	unsigned long status = priv->status;
+
+	IWL_DEBUG_RF_KILL("Card state received: HW:%s SW:%s\n",
+			  (flags & HW_CARD_DISABLED) ? "Kill" : "On",
+			  (flags & SW_CARD_DISABLED) ? "Kill" : "On");
+
+	if (flags & (SW_CARD_DISABLED | HW_CARD_DISABLED |
+		     RF_CARD_DISABLED)) {
+
+		iwl_write32(priv, CSR_UCODE_DRV_GP1_SET,
+			    CSR_UCODE_DRV_GP1_BIT_CMD_BLOCKED);
+
+		if (!iwl_grab_nic_access(priv)) {
+			iwl_write_direct32(
+				priv, HBUS_TARG_MBX_C,
+				HBUS_TARG_MBX_C_REG_BIT_CMD_BLOCKED);
+
+			iwl_release_nic_access(priv);
+		}
+
+		if (!(flags & RXON_CARD_DISABLED)) {
+			iwl_write32(priv, CSR_UCODE_DRV_GP1_CLR,
+				    CSR_UCODE_DRV_GP1_BIT_CMD_BLOCKED);
+			if (!iwl_grab_nic_access(priv)) {
+				iwl_write_direct32(
+					priv, HBUS_TARG_MBX_C,
+					HBUS_TARG_MBX_C_REG_BIT_CMD_BLOCKED);
+
+				iwl_release_nic_access(priv);
+			}
+		}
+
+		if (flags & RF_CARD_DISABLED) {
+			iwl_write32(priv, CSR_UCODE_DRV_GP1_SET,
+				    CSR_UCODE_DRV_GP1_REG_BIT_CT_KILL_EXIT);
+			iwl_read32(priv, CSR_UCODE_DRV_GP1);
+			if (!iwl_grab_nic_access(priv))
+				iwl_release_nic_access(priv);
+		}
+	}
+
+	if (flags & HW_CARD_DISABLED)
+		set_bit(STATUS_RF_KILL_HW, &priv->status);
+	else
+		clear_bit(STATUS_RF_KILL_HW, &priv->status);
+
+
+	if (flags & SW_CARD_DISABLED)
+		set_bit(STATUS_RF_KILL_SW, &priv->status);
+	else
+		clear_bit(STATUS_RF_KILL_SW, &priv->status);
+
+	if (!(flags & RXON_CARD_DISABLED))
+		iwl_scan_cancel(priv);
+
+	if ((test_bit(STATUS_RF_KILL_HW, &status) !=
+	     test_bit(STATUS_RF_KILL_HW, &priv->status)) ||
+	    (test_bit(STATUS_RF_KILL_SW, &status) !=
+	     test_bit(STATUS_RF_KILL_SW, &priv->status)))
+		queue_work(priv->workqueue, &priv->rf_kill);
+	else
+		wake_up_interruptible(&priv->wait_command_queue);
+}
+
+int iwl4965_set_pwr_src(struct iwl_priv *priv, enum iwl_pwr_src src)
+{
+	int ret;
+	unsigned long flags;
+
+	spin_lock_irqsave(&priv->lock, flags);
+	ret = iwl_grab_nic_access(priv);
+	if (ret)
+		goto err;
+
+	if (src == IWL_PWR_SRC_VAUX) {
+		u32 val;
+		ret = pci_read_config_dword(priv->pci_dev, PCI_POWER_SOURCE,
+					    &val);
+
+		if (val & PCI_CFG_PMC_PME_FROM_D3COLD_SUPPORT)
+			iwl_set_bits_mask_prph(priv, APMG_PS_CTRL_REG,
+					       APMG_PS_CTRL_VAL_PWR_SRC_VAUX,
+					       ~APMG_PS_CTRL_MSK_PWR_SRC);
+	} else {
+		iwl_set_bits_mask_prph(priv, APMG_PS_CTRL_REG,
+				       APMG_PS_CTRL_VAL_PWR_SRC_VMAIN,
+				       ~APMG_PS_CTRL_MSK_PWR_SRC);
+	}
+
+	iwl_release_nic_access(priv);
+err:
+	spin_unlock_irqrestore(&priv->lock, flags);
+	return ret;
+}
+
+/**
+ * iwl4965_setup_rx_handlers - Initialize Rx handler callbacks
+ *
+ * Setup the RX handlers for each of the reply types sent from the uCode
+ * to the host.
+ *
+ * This function chains into the hardware specific files for them to setup
+ * any hardware specific handlers as well.
+ */
+static void iwl_setup_rx_handlers(struct iwl_priv *priv)
+{
+	priv->rx_handlers[REPLY_ALIVE] = iwl_rx_reply_alive;
+	priv->rx_handlers[REPLY_ERROR] = iwl4965_rx_reply_error;
+	priv->rx_handlers[CHANNEL_SWITCH_NOTIFICATION] = iwl4965_rx_csa;
+	priv->rx_handlers[SPECTRUM_MEASURE_NOTIFICATION] =
+	    iwl4965_rx_spectrum_measure_notif;
+	priv->rx_handlers[PM_SLEEP_NOTIFICATION] = iwl4965_rx_pm_sleep_notif;
+	priv->rx_handlers[PM_DEBUG_STATISTIC_NOTIFIC] =
+	    iwl4965_rx_pm_debug_statistics_notif;
+	priv->rx_handlers[BEACON_NOTIFICATION] = iwl4965_rx_beacon_notif;
+
+	/*
+	 * The same handler is used for both the REPLY to a discrete
+	 * statistics request from the host as well as for the periodic
+	 * statistics notifications (after received beacons) from the uCode.
+	 */
+	priv->rx_handlers[REPLY_STATISTICS_CMD] = iwl_rx_statistics;
+	priv->rx_handlers[STATISTICS_NOTIFICATION] = iwl_rx_statistics;
+
+	iwl_setup_rx_scan_handlers(priv);
+
+	/* status change handler */
+	priv->rx_handlers[CARD_STATE_NOTIFICATION] = iwl4965_rx_card_state_notif;
+
+	priv->rx_handlers[MISSED_BEACONS_NOTIFICATION] =
+	    iwl_rx_missed_beacon_notif;
+	/* Rx handlers */
+	priv->rx_handlers[REPLY_RX_PHY_CMD] = iwl_rx_reply_rx_phy;
+	priv->rx_handlers[REPLY_RX_MPDU_CMD] = iwl_rx_reply_rx;
+	/* block ack */
+	priv->rx_handlers[REPLY_COMPRESSED_BA] = iwl_rx_reply_compressed_ba;
+	/* Set up hardware specific Rx handlers */
+	priv->cfg->ops->lib->rx_handler_setup(priv);
+}
+
+/*
+ * this should be called while priv->lock is locked
+*/
+static void __iwl_rx_replenish(struct iwl_priv *priv)
+{
+	iwl_rx_allocate(priv);
+	iwl_rx_queue_restock(priv);
+}
+
+
+/**
+ * iwl_rx_handle - Main entry function for receiving responses from uCode
+ *
+ * Uses the priv->rx_handlers callback function array to invoke
+ * the appropriate handlers, including command responses,
+ * frame-received notifications, and other notifications.
+ */
+void iwl_rx_handle(struct iwl_priv *priv)
+{
+	struct iwl_rx_mem_buffer *rxb;
+	struct iwl_rx_packet *pkt;
+	struct iwl_rx_queue *rxq = &priv->rxq;
+	u32 r, i;
+	int reclaim;
+	unsigned long flags;
+	u8 fill_rx = 0;
+	u32 count = 8;
+
+	/* uCode's read index (stored in shared DRAM) indicates the last Rx
+	 * buffer that the driver may process (last buffer filled by ucode). */
+	r = priv->cfg->ops->lib->shared_mem_rx_idx(priv);
+	i = rxq->read;
+
+	/* Rx interrupt, but nothing sent from uCode */
+	if (i == r)
+		IWL_DEBUG(IWL_DL_RX, "r = %d, i = %d\n", r, i);
+
+	if (iwl_rx_queue_space(rxq) > (RX_QUEUE_SIZE / 2))
+		fill_rx = 1;
+
+	while (i != r) {
+		rxb = rxq->queue[i];
+
+		/* If an RXB doesn't have a Rx queue slot associated with it,
+		 * then a bug has been introduced in the queue refilling
+		 * routines -- catch it here */
+		BUG_ON(rxb == NULL);
+
+		rxq->queue[i] = NULL;
+
+		pci_dma_sync_single_for_cpu(priv->pci_dev, rxb->dma_addr,
+					    priv->hw_params.rx_buf_size,
+					    PCI_DMA_FROMDEVICE);
+		pkt = (struct iwl_rx_packet *)rxb->skb->data;
+
+		/* Reclaim a command buffer only if this packet is a response
+		 *   to a (driver-originated) command.
+		 * If the packet (e.g. Rx frame) originated from uCode,
+		 *   there is no command buffer to reclaim.
+		 * Ucode should set SEQ_RX_FRAME bit if ucode-originated,
+		 *   but apparently a few don't get set; catch them here. */
+		reclaim = !(pkt->hdr.sequence & SEQ_RX_FRAME) &&
+			(pkt->hdr.cmd != REPLY_RX_PHY_CMD) &&
+			(pkt->hdr.cmd != REPLY_RX) &&
+			(pkt->hdr.cmd != REPLY_COMPRESSED_BA) &&
+			(pkt->hdr.cmd != STATISTICS_NOTIFICATION) &&
+			(pkt->hdr.cmd != REPLY_TX);
+
+		/* Based on type of command response or notification,
+		 *   handle those that need handling via function in
+		 *   rx_handlers table.  See iwl4965_setup_rx_handlers() */
+		if (priv->rx_handlers[pkt->hdr.cmd]) {
+			IWL_DEBUG(IWL_DL_RX, "r = %d, i = %d, %s, 0x%02x\n", r,
+				i, get_cmd_string(pkt->hdr.cmd), pkt->hdr.cmd);
+			priv->rx_handlers[pkt->hdr.cmd] (priv, rxb);
+		} else {
+			/* No handling needed */
+			IWL_DEBUG(IWL_DL_RX,
+				"r %d i %d No handler needed for %s, 0x%02x\n",
+				r, i, get_cmd_string(pkt->hdr.cmd),
+				pkt->hdr.cmd);
+		}
+
+		if (reclaim) {
+			/* Invoke any callbacks, transfer the skb to caller, and
+			 * fire off the (possibly) blocking iwl_send_cmd()
+			 * as we reclaim the driver command queue */
+			if (rxb && rxb->skb)
+				iwl_tx_cmd_complete(priv, rxb);
+			else
+				IWL_WARNING("Claim null rxb?\n");
+		}
+
+		/* For now we just don't re-use anything.  We can tweak this
+		 * later to try and re-use notification packets and SKBs that
+		 * fail to Rx correctly */
+		if (rxb->skb != NULL) {
+			priv->alloc_rxb_skb--;
+			dev_kfree_skb_any(rxb->skb);
+			rxb->skb = NULL;
+		}
+
+		pci_unmap_single(priv->pci_dev, rxb->dma_addr,
+				 priv->hw_params.rx_buf_size,
+				 PCI_DMA_FROMDEVICE);
+		spin_lock_irqsave(&rxq->lock, flags);
+		list_add_tail(&rxb->list, &priv->rxq.rx_used);
+		spin_unlock_irqrestore(&rxq->lock, flags);
+		i = (i + 1) & RX_QUEUE_MASK;
+		/* If there are a lot of unused frames,
+		 * restock the Rx queue so ucode wont assert. */
+		if (fill_rx) {
+			count++;
+			if (count >= 8) {
+				priv->rxq.read = i;
+				__iwl_rx_replenish(priv);
+				count = 0;
+			}
+		}
+	}
+
+	/* Backtrack one entry */
+	priv->rxq.read = i;
+	iwl_rx_queue_restock(priv);
+}
+
+#ifdef CONFIG_IWLWIFI_DEBUG
+static void iwl4965_print_rx_config_cmd(struct iwl_priv *priv)
+{
+	struct iwl_rxon_cmd *rxon = &priv->staging_rxon;
+	DECLARE_MAC_BUF(mac);
+
+	IWL_DEBUG_RADIO("RX CONFIG:\n");
+	iwl_print_hex_dump(priv, IWL_DL_RADIO, (u8 *) rxon, sizeof(*rxon));
+	IWL_DEBUG_RADIO("u16 channel: 0x%x\n", le16_to_cpu(rxon->channel));
+	IWL_DEBUG_RADIO("u32 flags: 0x%08X\n", le32_to_cpu(rxon->flags));
+	IWL_DEBUG_RADIO("u32 filter_flags: 0x%08x\n",
+			le32_to_cpu(rxon->filter_flags));
+	IWL_DEBUG_RADIO("u8 dev_type: 0x%x\n", rxon->dev_type);
+	IWL_DEBUG_RADIO("u8 ofdm_basic_rates: 0x%02x\n",
+			rxon->ofdm_basic_rates);
+	IWL_DEBUG_RADIO("u8 cck_basic_rates: 0x%02x\n", rxon->cck_basic_rates);
+	IWL_DEBUG_RADIO("u8[6] node_addr: %s\n",
+			print_mac(mac, rxon->node_addr));
+	IWL_DEBUG_RADIO("u8[6] bssid_addr: %s\n",
+			print_mac(mac, rxon->bssid_addr));
+	IWL_DEBUG_RADIO("u16 assoc_id: 0x%x\n", le16_to_cpu(rxon->assoc_id));
+}
+#endif
+
+static void iwl4965_enable_interrupts(struct iwl_priv *priv)
+{
+	IWL_DEBUG_ISR("Enabling interrupts\n");
+	set_bit(STATUS_INT_ENABLED, &priv->status);
+	iwl_write32(priv, CSR_INT_MASK, CSR_INI_SET_MASK);
+}
+
+/* call this function to flush any scheduled tasklet */
+static inline void iwl_synchronize_irq(struct iwl_priv *priv)
+{
+	/* wait to make sure we flush pedding tasklet*/
+	synchronize_irq(priv->pci_dev->irq);
+	tasklet_kill(&priv->irq_tasklet);
+}
+
+static inline void iwl4965_disable_interrupts(struct iwl_priv *priv)
+{
+	clear_bit(STATUS_INT_ENABLED, &priv->status);
+
+	/* disable interrupts from uCode/NIC to host */
+	iwl_write32(priv, CSR_INT_MASK, 0x00000000);
+
+	/* acknowledge/clear/reset any interrupts still pending
+	 * from uCode or flow handler (Rx/Tx DMA) */
+	iwl_write32(priv, CSR_INT, 0xffffffff);
+	iwl_write32(priv, CSR_FH_INT_STATUS, 0xffffffff);
+	IWL_DEBUG_ISR("Disabled interrupts\n");
+}
+
+
+/**
+ * iwl4965_irq_handle_error - called for HW or SW error interrupt from card
+ */
+static void iwl4965_irq_handle_error(struct iwl_priv *priv)
+{
+	/* Set the FW error flag -- cleared on iwl4965_down */
+	set_bit(STATUS_FW_ERROR, &priv->status);
+
+	/* Cancel currently queued command. */
+	clear_bit(STATUS_HCMD_ACTIVE, &priv->status);
+
+#ifdef CONFIG_IWLWIFI_DEBUG
+	if (priv->debug_level & IWL_DL_FW_ERRORS) {
+		iwl_dump_nic_error_log(priv);
+		iwl_dump_nic_event_log(priv);
+		iwl4965_print_rx_config_cmd(priv);
+	}
+#endif
+
+	wake_up_interruptible(&priv->wait_command_queue);
+
+	/* Keep the restart process from trying to send host
+	 * commands by clearing the INIT status bit */
+	clear_bit(STATUS_READY, &priv->status);
+
+	if (!test_bit(STATUS_EXIT_PENDING, &priv->status)) {
+		IWL_DEBUG(IWL_DL_FW_ERRORS,
+			  "Restarting adapter due to uCode error.\n");
+
+		if (iwl_is_associated(priv)) {
+			memcpy(&priv->recovery_rxon, &priv->active_rxon,
+			       sizeof(priv->recovery_rxon));
+			priv->error_recovering = 1;
+		}
+		if (priv->cfg->mod_params->restart_fw)
+			queue_work(priv->workqueue, &priv->restart);
+	}
+}
+
+static void iwl4965_error_recovery(struct iwl_priv *priv)
+{
+	unsigned long flags;
+
+	memcpy(&priv->staging_rxon, &priv->recovery_rxon,
+	       sizeof(priv->staging_rxon));
+	priv->staging_rxon.filter_flags &= ~RXON_FILTER_ASSOC_MSK;
+	iwl4965_commit_rxon(priv);
+
+	iwl_rxon_add_station(priv, priv->bssid, 1);
+
+	spin_lock_irqsave(&priv->lock, flags);
+	priv->assoc_id = le16_to_cpu(priv->staging_rxon.assoc_id);
+	priv->error_recovering = 0;
+	spin_unlock_irqrestore(&priv->lock, flags);
+}
+
+static void iwl4965_irq_tasklet(struct iwl_priv *priv)
+{
+	u32 inta, handled = 0;
+	u32 inta_fh;
+	unsigned long flags;
+#ifdef CONFIG_IWLWIFI_DEBUG
+	u32 inta_mask;
+#endif
+
+	spin_lock_irqsave(&priv->lock, flags);
+
+	/* Ack/clear/reset pending uCode interrupts.
+	 * Note:  Some bits in CSR_INT are "OR" of bits in CSR_FH_INT_STATUS,
+	 *  and will clear only when CSR_FH_INT_STATUS gets cleared. */
+	inta = iwl_read32(priv, CSR_INT);
+	iwl_write32(priv, CSR_INT, inta);
+
+	/* Ack/clear/reset pending flow-handler (DMA) interrupts.
+	 * Any new interrupts that happen after this, either while we're
+	 * in this tasklet, or later, will show up in next ISR/tasklet. */
+	inta_fh = iwl_read32(priv, CSR_FH_INT_STATUS);
+	iwl_write32(priv, CSR_FH_INT_STATUS, inta_fh);
+
+#ifdef CONFIG_IWLWIFI_DEBUG
+	if (priv->debug_level & IWL_DL_ISR) {
+		/* just for debug */
+		inta_mask = iwl_read32(priv, CSR_INT_MASK);
+		IWL_DEBUG_ISR("inta 0x%08x, enabled 0x%08x, fh 0x%08x\n",
+			      inta, inta_mask, inta_fh);
+	}
+#endif
+
+	/* Since CSR_INT and CSR_FH_INT_STATUS reads and clears are not
+	 * atomic, make sure that inta covers all the interrupts that
+	 * we've discovered, even if FH interrupt came in just after
+	 * reading CSR_INT. */
+	if (inta_fh & CSR49_FH_INT_RX_MASK)
+		inta |= CSR_INT_BIT_FH_RX;
+	if (inta_fh & CSR49_FH_INT_TX_MASK)
+		inta |= CSR_INT_BIT_FH_TX;
+
+	/* Now service all interrupt bits discovered above. */
+	if (inta & CSR_INT_BIT_HW_ERR) {
+		IWL_ERROR("Microcode HW error detected.  Restarting.\n");
+
+		/* Tell the device to stop sending interrupts */
+		iwl4965_disable_interrupts(priv);
+
+		iwl4965_irq_handle_error(priv);
+
+		handled |= CSR_INT_BIT_HW_ERR;
+
+		spin_unlock_irqrestore(&priv->lock, flags);
+
+		return;
+	}
+
+#ifdef CONFIG_IWLWIFI_DEBUG
+	if (priv->debug_level & (IWL_DL_ISR)) {
+		/* NIC fires this, but we don't use it, redundant with WAKEUP */
+		if (inta & CSR_INT_BIT_SCD)
+			IWL_DEBUG_ISR("Scheduler finished to transmit "
+				      "the frame/frames.\n");
+
+		/* Alive notification via Rx interrupt will do the real work */
+		if (inta & CSR_INT_BIT_ALIVE)
+			IWL_DEBUG_ISR("Alive interrupt\n");
+	}
+#endif
+	/* Safely ignore these bits for debug checks below */
+	inta &= ~(CSR_INT_BIT_SCD | CSR_INT_BIT_ALIVE);
+
+	/* HW RF KILL switch toggled */
+	if (inta & CSR_INT_BIT_RF_KILL) {
+		int hw_rf_kill = 0;
+		if (!(iwl_read32(priv, CSR_GP_CNTRL) &
+				CSR_GP_CNTRL_REG_FLAG_HW_RF_KILL_SW))
+			hw_rf_kill = 1;
+
+		IWL_DEBUG(IWL_DL_RF_KILL, "RF_KILL bit toggled to %s.\n",
+				hw_rf_kill ? "disable radio":"enable radio");
+
+		/* driver only loads ucode once setting the interface up.
+		 * the driver as well won't allow loading if RFKILL is set
+		 * therefore no need to restart the driver from this handler
+		 */
+		if (!hw_rf_kill && !test_bit(STATUS_ALIVE, &priv->status))
+			clear_bit(STATUS_RF_KILL_HW, &priv->status);
+
+		handled |= CSR_INT_BIT_RF_KILL;
+	}
+
+	/* Chip got too hot and stopped itself */
+	if (inta & CSR_INT_BIT_CT_KILL) {
+		IWL_ERROR("Microcode CT kill error detected.\n");
+		handled |= CSR_INT_BIT_CT_KILL;
+	}
+
+	/* Error detected by uCode */
+	if (inta & CSR_INT_BIT_SW_ERR) {
+		IWL_ERROR("Microcode SW error detected.  Restarting 0x%X.\n",
+			  inta);
+		iwl4965_irq_handle_error(priv);
+		handled |= CSR_INT_BIT_SW_ERR;
+	}
+
+	/* uCode wakes up after power-down sleep */
+	if (inta & CSR_INT_BIT_WAKEUP) {
+		IWL_DEBUG_ISR("Wakeup interrupt\n");
+		iwl_rx_queue_update_write_ptr(priv, &priv->rxq);
+		iwl_txq_update_write_ptr(priv, &priv->txq[0]);
+		iwl_txq_update_write_ptr(priv, &priv->txq[1]);
+		iwl_txq_update_write_ptr(priv, &priv->txq[2]);
+		iwl_txq_update_write_ptr(priv, &priv->txq[3]);
+		iwl_txq_update_write_ptr(priv, &priv->txq[4]);
+		iwl_txq_update_write_ptr(priv, &priv->txq[5]);
+
+		handled |= CSR_INT_BIT_WAKEUP;
+	}
+
+	/* All uCode command responses, including Tx command responses,
+	 * Rx "responses" (frame-received notification), and other
+	 * notifications from uCode come through here*/
+	if (inta & (CSR_INT_BIT_FH_RX | CSR_INT_BIT_SW_RX)) {
+		iwl_rx_handle(priv);
+		handled |= (CSR_INT_BIT_FH_RX | CSR_INT_BIT_SW_RX);
+	}
+
+	if (inta & CSR_INT_BIT_FH_TX) {
+		IWL_DEBUG_ISR("Tx interrupt\n");
+		handled |= CSR_INT_BIT_FH_TX;
+		/* FH finished to write, send event */
+		priv->ucode_write_complete = 1;
+		wake_up_interruptible(&priv->wait_command_queue);
+	}
+
+	if (inta & ~handled)
+		IWL_ERROR("Unhandled INTA bits 0x%08x\n", inta & ~handled);
+
+	if (inta & ~CSR_INI_SET_MASK) {
+		IWL_WARNING("Disabled INTA bits 0x%08x were pending\n",
+			 inta & ~CSR_INI_SET_MASK);
+		IWL_WARNING("   with FH_INT = 0x%08x\n", inta_fh);
+	}
+
+	/* Re-enable all interrupts */
+	/* only Re-enable if diabled by irq */
+	if (test_bit(STATUS_INT_ENABLED, &priv->status))
+		iwl4965_enable_interrupts(priv);
+
+#ifdef CONFIG_IWLWIFI_DEBUG
+	if (priv->debug_level & (IWL_DL_ISR)) {
+		inta = iwl_read32(priv, CSR_INT);
+		inta_mask = iwl_read32(priv, CSR_INT_MASK);
+		inta_fh = iwl_read32(priv, CSR_FH_INT_STATUS);
+		IWL_DEBUG_ISR("End inta 0x%08x, enabled 0x%08x, fh 0x%08x, "
+			"flags 0x%08lx\n", inta, inta_mask, inta_fh, flags);
+	}
+#endif
+	spin_unlock_irqrestore(&priv->lock, flags);
+}
+
+static irqreturn_t iwl4965_isr(int irq, void *data)
+{
+	struct iwl_priv *priv = data;
+	u32 inta, inta_mask;
+	u32 inta_fh;
+	if (!priv)
+		return IRQ_NONE;
+
+	spin_lock(&priv->lock);
+
+	/* Disable (but don't clear!) interrupts here to avoid
+	 *    back-to-back ISRs and sporadic interrupts from our NIC.
+	 * If we have something to service, the tasklet will re-enable ints.
+	 * If we *don't* have something, we'll re-enable before leaving here. */
+	inta_mask = iwl_read32(priv, CSR_INT_MASK);  /* just for debug */
+	iwl_write32(priv, CSR_INT_MASK, 0x00000000);
+
+	/* Discover which interrupts are active/pending */
+	inta = iwl_read32(priv, CSR_INT);
+	inta_fh = iwl_read32(priv, CSR_FH_INT_STATUS);
+
+	/* Ignore interrupt if there's nothing in NIC to service.
+	 * This may be due to IRQ shared with another device,
+	 * or due to sporadic interrupts thrown from our NIC. */
+	if (!inta && !inta_fh) {
+		IWL_DEBUG_ISR("Ignore interrupt, inta == 0, inta_fh == 0\n");
+		goto none;
+	}
+
+	if ((inta == 0xFFFFFFFF) || ((inta & 0xFFFFFFF0) == 0xa5a5a5a0)) {
+		/* Hardware disappeared. It might have already raised
+		 * an interrupt */
+		IWL_WARNING("HARDWARE GONE?? INTA == 0x%080x\n", inta);
+		goto unplugged;
+	}
+
+	IWL_DEBUG_ISR("ISR inta 0x%08x, enabled 0x%08x, fh 0x%08x\n",
+		      inta, inta_mask, inta_fh);
+
+	inta &= ~CSR_INT_BIT_SCD;
+
+	/* iwl4965_irq_tasklet() will service interrupts and re-enable them */
+	if (likely(inta || inta_fh))
+		tasklet_schedule(&priv->irq_tasklet);
+
+ unplugged:
+	spin_unlock(&priv->lock);
+	return IRQ_HANDLED;
+
+ none:
+	/* re-enable interrupts here since we don't have anything to service. */
+	/* only Re-enable if diabled by irq */
+	if (test_bit(STATUS_INT_ENABLED, &priv->status))
+		iwl4965_enable_interrupts(priv);
+	spin_unlock(&priv->lock);
+	return IRQ_NONE;
+}
+
+/******************************************************************************
+ *
+ * uCode download functions
+ *
+ ******************************************************************************/
+
+static void iwl4965_dealloc_ucode_pci(struct iwl_priv *priv)
+{
+	iwl_free_fw_desc(priv->pci_dev, &priv->ucode_code);
+	iwl_free_fw_desc(priv->pci_dev, &priv->ucode_data);
+	iwl_free_fw_desc(priv->pci_dev, &priv->ucode_data_backup);
+	iwl_free_fw_desc(priv->pci_dev, &priv->ucode_init);
+	iwl_free_fw_desc(priv->pci_dev, &priv->ucode_init_data);
+	iwl_free_fw_desc(priv->pci_dev, &priv->ucode_boot);
+}
+
+static void iwl4965_nic_start(struct iwl_priv *priv)
+{
+	/* Remove all resets to allow NIC to operate */
+	iwl_write32(priv, CSR_RESET, 0);
+}
+
+
+/**
+ * iwl4965_read_ucode - Read uCode images from disk file.
+ *
+ * Copy into buffers for card to fetch via bus-mastering
+ */
+static int iwl4965_read_ucode(struct iwl_priv *priv)
+{
+	struct iwl_ucode *ucode;
+	int ret;
+	const struct firmware *ucode_raw;
+	const char *name = priv->cfg->fw_name;
+	u8 *src;
+	size_t len;
+	u32 ver, inst_size, data_size, init_size, init_data_size, boot_size;
+
+	/* Ask kernel firmware_class module to get the boot firmware off disk.
+	 * request_firmware() is synchronous, file is in memory on return. */
+	ret = request_firmware(&ucode_raw, name, &priv->pci_dev->dev);
+	if (ret < 0) {
+		IWL_ERROR("%s firmware file req failed: Reason %d\n",
+					name, ret);
+		goto error;
+	}
+
+	IWL_DEBUG_INFO("Got firmware '%s' file (%zd bytes) from disk\n",
+		       name, ucode_raw->size);
+
+	/* Make sure that we got at least our header! */
+	if (ucode_raw->size < sizeof(*ucode)) {
+		IWL_ERROR("File size way too small!\n");
+		ret = -EINVAL;
+		goto err_release;
+	}
+
+	/* Data from ucode file:  header followed by uCode images */
+	ucode = (void *)ucode_raw->data;
+
+	ver = le32_to_cpu(ucode->ver);
+	inst_size = le32_to_cpu(ucode->inst_size);
+	data_size = le32_to_cpu(ucode->data_size);
+	init_size = le32_to_cpu(ucode->init_size);
+	init_data_size = le32_to_cpu(ucode->init_data_size);
+	boot_size = le32_to_cpu(ucode->boot_size);
+
+	IWL_DEBUG_INFO("f/w package hdr ucode version = 0x%x\n", ver);
+	IWL_DEBUG_INFO("f/w package hdr runtime inst size = %u\n",
+		       inst_size);
+	IWL_DEBUG_INFO("f/w package hdr runtime data size = %u\n",
+		       data_size);
+	IWL_DEBUG_INFO("f/w package hdr init inst size = %u\n",
+		       init_size);
+	IWL_DEBUG_INFO("f/w package hdr init data size = %u\n",
+		       init_data_size);
+	IWL_DEBUG_INFO("f/w package hdr boot inst size = %u\n",
+		       boot_size);
+
+	/* Verify size of file vs. image size info in file's header */
+	if (ucode_raw->size < sizeof(*ucode) +
+		inst_size + data_size + init_size +
+		init_data_size + boot_size) {
+
+		IWL_DEBUG_INFO("uCode file size %d too small\n",
+			       (int)ucode_raw->size);
+		ret = -EINVAL;
+		goto err_release;
+	}
+
+	/* Verify that uCode images will fit in card's SRAM */
+	if (inst_size > priv->hw_params.max_inst_size) {
+		IWL_DEBUG_INFO("uCode instr len %d too large to fit in\n",
+			       inst_size);
+		ret = -EINVAL;
+		goto err_release;
+	}
+
+	if (data_size > priv->hw_params.max_data_size) {
+		IWL_DEBUG_INFO("uCode data len %d too large to fit in\n",
+				data_size);
+		ret = -EINVAL;
+		goto err_release;
+	}
+	if (init_size > priv->hw_params.max_inst_size) {
+		IWL_DEBUG_INFO
+		    ("uCode init instr len %d too large to fit in\n",
+		      init_size);
+		ret = -EINVAL;
+		goto err_release;
+	}
+	if (init_data_size > priv->hw_params.max_data_size) {
+		IWL_DEBUG_INFO
+		    ("uCode init data len %d too large to fit in\n",
+		      init_data_size);
+		ret = -EINVAL;
+		goto err_release;
+	}
+	if (boot_size > priv->hw_params.max_bsm_size) {
+		IWL_DEBUG_INFO
+		    ("uCode boot instr len %d too large to fit in\n",
+		      boot_size);
+		ret = -EINVAL;
+		goto err_release;
+	}
+
+	/* Allocate ucode buffers for card's bus-master loading ... */
+
+	/* Runtime instructions and 2 copies of data:
+	 * 1) unmodified from disk
+	 * 2) backup cache for save/restore during power-downs */
+	priv->ucode_code.len = inst_size;
+	iwl_alloc_fw_desc(priv->pci_dev, &priv->ucode_code);
+
+	priv->ucode_data.len = data_size;
+	iwl_alloc_fw_desc(priv->pci_dev, &priv->ucode_data);
+
+	priv->ucode_data_backup.len = data_size;
+	iwl_alloc_fw_desc(priv->pci_dev, &priv->ucode_data_backup);
+
+	/* Initialization instructions and data */
+	if (init_size && init_data_size) {
+		priv->ucode_init.len = init_size;
+		iwl_alloc_fw_desc(priv->pci_dev, &priv->ucode_init);
+
+		priv->ucode_init_data.len = init_data_size;
+		iwl_alloc_fw_desc(priv->pci_dev, &priv->ucode_init_data);
+
+		if (!priv->ucode_init.v_addr || !priv->ucode_init_data.v_addr)
+			goto err_pci_alloc;
+	}
+
+	/* Bootstrap (instructions only, no data) */
+	if (boot_size) {
+		priv->ucode_boot.len = boot_size;
+		iwl_alloc_fw_desc(priv->pci_dev, &priv->ucode_boot);
+
+		if (!priv->ucode_boot.v_addr)
+			goto err_pci_alloc;
+	}
+
+	/* Copy images into buffers for card's bus-master reads ... */
+
+	/* Runtime instructions (first block of data in file) */
+	src = &ucode->data[0];
+	len = priv->ucode_code.len;
+	IWL_DEBUG_INFO("Copying (but not loading) uCode instr len %Zd\n", len);
+	memcpy(priv->ucode_code.v_addr, src, len);
+	IWL_DEBUG_INFO("uCode instr buf vaddr = 0x%p, paddr = 0x%08x\n",
+		priv->ucode_code.v_addr, (u32)priv->ucode_code.p_addr);
+
+	/* Runtime data (2nd block)
+	 * NOTE:  Copy into backup buffer will be done in iwl4965_up()  */
+	src = &ucode->data[inst_size];
+	len = priv->ucode_data.len;
+	IWL_DEBUG_INFO("Copying (but not loading) uCode data len %Zd\n", len);
+	memcpy(priv->ucode_data.v_addr, src, len);
+	memcpy(priv->ucode_data_backup.v_addr, src, len);
+
+	/* Initialization instructions (3rd block) */
+	if (init_size) {
+		src = &ucode->data[inst_size + data_size];
+		len = priv->ucode_init.len;
+		IWL_DEBUG_INFO("Copying (but not loading) init instr len %Zd\n",
+				len);
+		memcpy(priv->ucode_init.v_addr, src, len);
+	}
+
+	/* Initialization data (4th block) */
+	if (init_data_size) {
+		src = &ucode->data[inst_size + data_size + init_size];
+		len = priv->ucode_init_data.len;
+		IWL_DEBUG_INFO("Copying (but not loading) init data len %Zd\n",
+			       len);
+		memcpy(priv->ucode_init_data.v_addr, src, len);
+	}
+
+	/* Bootstrap instructions (5th block) */
+	src = &ucode->data[inst_size + data_size + init_size + init_data_size];
+	len = priv->ucode_boot.len;
+	IWL_DEBUG_INFO("Copying (but not loading) boot instr len %Zd\n", len);
+	memcpy(priv->ucode_boot.v_addr, src, len);
+
+	/* We have our copies now, allow OS release its copies */
+	release_firmware(ucode_raw);
+	return 0;
+
+ err_pci_alloc:
+	IWL_ERROR("failed to allocate pci memory\n");
+	ret = -ENOMEM;
+	iwl4965_dealloc_ucode_pci(priv);
+
+ err_release:
+	release_firmware(ucode_raw);
+
+ error:
+	return ret;
+}
+
+/**
+ * iwl_alive_start - called after REPLY_ALIVE notification received
+ *                   from protocol/runtime uCode (initialization uCode's
+ *                   Alive gets handled by iwl_init_alive_start()).
+ */
+static void iwl_alive_start(struct iwl_priv *priv)
+{
+	int ret = 0;
+
+	IWL_DEBUG_INFO("Runtime Alive received.\n");
+
+	if (priv->card_alive.is_valid != UCODE_VALID_OK) {
+		/* We had an error bringing up the hardware, so take it
+		 * all the way back down so we can try again */
+		IWL_DEBUG_INFO("Alive failed.\n");
+		goto restart;
+	}
+
+	/* Initialize uCode has loaded Runtime uCode ... verify inst image.
+	 * This is a paranoid check, because we would not have gotten the
+	 * "runtime" alive if code weren't properly loaded.  */
+	if (iwl_verify_ucode(priv)) {
+		/* Runtime instruction load was bad;
+		 * take it all the way back down so we can try again */
+		IWL_DEBUG_INFO("Bad runtime uCode load.\n");
+		goto restart;
+	}
+
+	iwl_clear_stations_table(priv);
+	ret = priv->cfg->ops->lib->alive_notify(priv);
+	if (ret) {
+		IWL_WARNING("Could not complete ALIVE transition [ntf]: %d\n",
+			    ret);
+		goto restart;
+	}
+
+	/* After the ALIVE response, we can send host commands to 4965 uCode */
+	set_bit(STATUS_ALIVE, &priv->status);
+
+	if (iwl_is_rfkill(priv))
+		return;
+
+	ieee80211_wake_queues(priv->hw);
+
+	priv->active_rate = priv->rates_mask;
+	priv->active_rate_basic = priv->rates_mask & IWL_BASIC_RATES_MASK;
+
+	if (iwl_is_associated(priv)) {
+		struct iwl_rxon_cmd *active_rxon =
+				(struct iwl_rxon_cmd *)&priv->active_rxon;
+
+		memcpy(&priv->staging_rxon, &priv->active_rxon,
+		       sizeof(priv->staging_rxon));
+		active_rxon->filter_flags &= ~RXON_FILTER_ASSOC_MSK;
+	} else {
+		/* Initialize our rx_config data */
+		iwl4965_connection_init_rx_config(priv);
+		memcpy(priv->staging_rxon.node_addr, priv->mac_addr, ETH_ALEN);
+	}
+
+	/* Configure Bluetooth device coexistence support */
+	iwl4965_send_bt_config(priv);
+
+	iwl_reset_run_time_calib(priv);
+
+	/* Configure the adapter for unassociated operation */
+	iwl4965_commit_rxon(priv);
+
+	/* At this point, the NIC is initialized and operational */
+	iwl_rf_kill_ct_config(priv);
+
+	iwl_leds_register(priv);
+
+	IWL_DEBUG_INFO("ALIVE processing complete.\n");
+	set_bit(STATUS_READY, &priv->status);
+	wake_up_interruptible(&priv->wait_command_queue);
+
+	if (priv->error_recovering)
+		iwl4965_error_recovery(priv);
+
+	iwl_power_update_mode(priv, 1);
+	ieee80211_notify_mac(priv->hw, IEEE80211_NOTIFY_RE_ASSOC);
+
+	if (test_and_clear_bit(STATUS_MODE_PENDING, &priv->status))
+		iwl4965_set_mode(priv, priv->iw_mode);
+
+	return;
+
+ restart:
+	queue_work(priv->workqueue, &priv->restart);
+}
+
+static void iwl_cancel_deferred_work(struct iwl_priv *priv);
+
+static void __iwl4965_down(struct iwl_priv *priv)
+{
+	unsigned long flags;
+	int exit_pending = test_bit(STATUS_EXIT_PENDING, &priv->status);
+
+	IWL_DEBUG_INFO(DRV_NAME " is going down\n");
+
+	if (!exit_pending)
+		set_bit(STATUS_EXIT_PENDING, &priv->status);
+
+	iwl_leds_unregister(priv);
+
+	iwl_clear_stations_table(priv);
+
+	/* Unblock any waiting calls */
+	wake_up_interruptible_all(&priv->wait_command_queue);
+
+	/* Wipe out the EXIT_PENDING status bit if we are not actually
+	 * exiting the module */
+	if (!exit_pending)
+		clear_bit(STATUS_EXIT_PENDING, &priv->status);
+
+	/* stop and reset the on-board processor */
+	iwl_write32(priv, CSR_RESET, CSR_RESET_REG_FLAG_NEVO_RESET);
+
+	/* tell the device to stop sending interrupts */
+	spin_lock_irqsave(&priv->lock, flags);
+	iwl4965_disable_interrupts(priv);
+	spin_unlock_irqrestore(&priv->lock, flags);
+	iwl_synchronize_irq(priv);
+
+	if (priv->mac80211_registered)
+		ieee80211_stop_queues(priv->hw);
+
+	/* If we have not previously called iwl4965_init() then
+	 * clear all bits but the RF Kill and SUSPEND bits and return */
+	if (!iwl_is_init(priv)) {
+		priv->status = test_bit(STATUS_RF_KILL_HW, &priv->status) <<
+					STATUS_RF_KILL_HW |
+			       test_bit(STATUS_RF_KILL_SW, &priv->status) <<
+					STATUS_RF_KILL_SW |
+			       test_bit(STATUS_GEO_CONFIGURED, &priv->status) <<
+					STATUS_GEO_CONFIGURED |
+			       test_bit(STATUS_IN_SUSPEND, &priv->status) <<
+					STATUS_IN_SUSPEND |
+			       test_bit(STATUS_EXIT_PENDING, &priv->status) <<
+					STATUS_EXIT_PENDING;
+		goto exit;
+	}
+
+	/* ...otherwise clear out all the status bits but the RF Kill and
+	 * SUSPEND bits and continue taking the NIC down. */
+	priv->status &= test_bit(STATUS_RF_KILL_HW, &priv->status) <<
+				STATUS_RF_KILL_HW |
+			test_bit(STATUS_RF_KILL_SW, &priv->status) <<
+				STATUS_RF_KILL_SW |
+			test_bit(STATUS_GEO_CONFIGURED, &priv->status) <<
+				STATUS_GEO_CONFIGURED |
+			test_bit(STATUS_IN_SUSPEND, &priv->status) <<
+				STATUS_IN_SUSPEND |
+			test_bit(STATUS_FW_ERROR, &priv->status) <<
+				STATUS_FW_ERROR |
+		       test_bit(STATUS_EXIT_PENDING, &priv->status) <<
+				STATUS_EXIT_PENDING;
+
+	spin_lock_irqsave(&priv->lock, flags);
+	iwl_clear_bit(priv, CSR_GP_CNTRL,
+			 CSR_GP_CNTRL_REG_FLAG_MAC_ACCESS_REQ);
+	spin_unlock_irqrestore(&priv->lock, flags);
+
+	iwl_txq_ctx_stop(priv);
+	iwl_rxq_stop(priv);
+
+	spin_lock_irqsave(&priv->lock, flags);
+	if (!iwl_grab_nic_access(priv)) {
+		iwl_write_prph(priv, APMG_CLK_DIS_REG,
+					 APMG_CLK_VAL_DMA_CLK_RQT);
+		iwl_release_nic_access(priv);
+	}
+	spin_unlock_irqrestore(&priv->lock, flags);
+
+	udelay(5);
+
+	/* FIXME: apm_ops.suspend(priv) */
+	if (exit_pending || test_bit(STATUS_IN_SUSPEND, &priv->status))
+		priv->cfg->ops->lib->apm_ops.stop(priv);
+	else
+		priv->cfg->ops->lib->apm_ops.reset(priv);
+	priv->cfg->ops->lib->free_shared_mem(priv);
+
+ exit:
+	memset(&priv->card_alive, 0, sizeof(struct iwl_alive_resp));
+
+	if (priv->ibss_beacon)
+		dev_kfree_skb(priv->ibss_beacon);
+	priv->ibss_beacon = NULL;
+
+	/* clear out any free frames */
+	iwl_clear_free_frames(priv);
+}
+
+static void iwl4965_down(struct iwl_priv *priv)
+{
+	mutex_lock(&priv->mutex);
+	__iwl4965_down(priv);
+	mutex_unlock(&priv->mutex);
+
+	iwl_cancel_deferred_work(priv);
+}
+
+#define MAX_HW_RESTARTS 5
+
+static int __iwl4965_up(struct iwl_priv *priv)
+{
+	int i;
+	int ret;
+
+	if (test_bit(STATUS_EXIT_PENDING, &priv->status)) {
+		IWL_WARNING("Exit pending; will not bring the NIC up\n");
+		return -EIO;
+	}
+
+	if (!priv->ucode_data_backup.v_addr || !priv->ucode_data.v_addr) {
+		IWL_ERROR("ucode not available for device bringup\n");
+		return -EIO;
+	}
+
+	/* If platform's RF_KILL switch is NOT set to KILL */
+	if (iwl_read32(priv, CSR_GP_CNTRL) & CSR_GP_CNTRL_REG_FLAG_HW_RF_KILL_SW)
+		clear_bit(STATUS_RF_KILL_HW, &priv->status);
+	else
+		set_bit(STATUS_RF_KILL_HW, &priv->status);
+
+	if (iwl_is_rfkill(priv)) {
+		iwl4965_enable_interrupts(priv);
+		IWL_WARNING("Radio disabled by %s RF Kill switch\n",
+		    test_bit(STATUS_RF_KILL_HW, &priv->status) ? "HW" : "SW");
+		return 0;
+	}
+
+	iwl_write32(priv, CSR_INT, 0xFFFFFFFF);
+
+	ret = priv->cfg->ops->lib->alloc_shared_mem(priv);
+	if (ret) {
+		IWL_ERROR("Unable to allocate shared memory\n");
+		return ret;
+	}
+
+	ret = iwl_hw_nic_init(priv);
+	if (ret) {
+		IWL_ERROR("Unable to init nic\n");
+		return ret;
+	}
+
+	/* make sure rfkill handshake bits are cleared */
+	iwl_write32(priv, CSR_UCODE_DRV_GP1_CLR, CSR_UCODE_SW_BIT_RFKILL);
+	iwl_write32(priv, CSR_UCODE_DRV_GP1_CLR,
+		    CSR_UCODE_DRV_GP1_BIT_CMD_BLOCKED);
+
+	/* clear (again), then enable host interrupts */
+	iwl_write32(priv, CSR_INT, 0xFFFFFFFF);
+	iwl4965_enable_interrupts(priv);
+
+	/* really make sure rfkill handshake bits are cleared */
+	iwl_write32(priv, CSR_UCODE_DRV_GP1_CLR, CSR_UCODE_SW_BIT_RFKILL);
+	iwl_write32(priv, CSR_UCODE_DRV_GP1_CLR, CSR_UCODE_SW_BIT_RFKILL);
+
+	/* Copy original ucode data image from disk into backup cache.
+	 * This will be used to initialize the on-board processor's
+	 * data SRAM for a clean start when the runtime program first loads. */
+	memcpy(priv->ucode_data_backup.v_addr, priv->ucode_data.v_addr,
+	       priv->ucode_data.len);
+
+	for (i = 0; i < MAX_HW_RESTARTS; i++) {
+
+		iwl_clear_stations_table(priv);
+
+		/* load bootstrap state machine,
+		 * load bootstrap program into processor's memory,
+		 * prepare to load the "initialize" uCode */
+		ret = priv->cfg->ops->lib->load_ucode(priv);
+
+		if (ret) {
+			IWL_ERROR("Unable to set up bootstrap uCode: %d\n", ret);
+			continue;
+		}
+
+		/* Clear out the uCode error bit if it is set */
+		clear_bit(STATUS_FW_ERROR, &priv->status);
+
+		/* start card; "initialize" will load runtime ucode */
+		iwl4965_nic_start(priv);
+
+		IWL_DEBUG_INFO(DRV_NAME " is coming up\n");
+
+		return 0;
+	}
+
+	set_bit(STATUS_EXIT_PENDING, &priv->status);
+	__iwl4965_down(priv);
+	clear_bit(STATUS_EXIT_PENDING, &priv->status);
+
+	/* tried to restart and config the device for as long as our
+	 * patience could withstand */
+	IWL_ERROR("Unable to initialize device after %d attempts.\n", i);
+	return -EIO;
+}
+
+
+/*****************************************************************************
+ *
+ * Workqueue callbacks
+ *
+ *****************************************************************************/
+
+static void iwl_bg_init_alive_start(struct work_struct *data)
+{
+	struct iwl_priv *priv =
+	    container_of(data, struct iwl_priv, init_alive_start.work);
+
+	if (test_bit(STATUS_EXIT_PENDING, &priv->status))
+		return;
+
+	mutex_lock(&priv->mutex);
+	priv->cfg->ops->lib->init_alive_start(priv);
+	mutex_unlock(&priv->mutex);
+}
+
+static void iwl_bg_alive_start(struct work_struct *data)
+{
+	struct iwl_priv *priv =
+	    container_of(data, struct iwl_priv, alive_start.work);
+
+	if (test_bit(STATUS_EXIT_PENDING, &priv->status))
+		return;
+
+	mutex_lock(&priv->mutex);
+	iwl_alive_start(priv);
+	mutex_unlock(&priv->mutex);
+}
+
+static void iwl4965_bg_rf_kill(struct work_struct *work)
+{
+	struct iwl_priv *priv = container_of(work, struct iwl_priv, rf_kill);
+
+	wake_up_interruptible(&priv->wait_command_queue);
+
+	if (test_bit(STATUS_EXIT_PENDING, &priv->status))
+		return;
+
+	mutex_lock(&priv->mutex);
+
+	if (!iwl_is_rfkill(priv)) {
+		IWL_DEBUG(IWL_DL_RF_KILL,
+			  "HW and/or SW RF Kill no longer active, restarting "
+			  "device\n");
+		if (!test_bit(STATUS_EXIT_PENDING, &priv->status))
+			queue_work(priv->workqueue, &priv->restart);
+	} else {
+		/* make sure mac80211 stop sending Tx frame */
+		if (priv->mac80211_registered)
+			ieee80211_stop_queues(priv->hw);
+
+		if (!test_bit(STATUS_RF_KILL_HW, &priv->status))
+			IWL_DEBUG_RF_KILL("Can not turn radio back on - "
+					  "disabled by SW switch\n");
+		else
+			IWL_WARNING("Radio Frequency Kill Switch is On:\n"
+				    "Kill switch must be turned off for "
+				    "wireless networking to work.\n");
+	}
+	mutex_unlock(&priv->mutex);
+	iwl_rfkill_set_hw_state(priv);
+}
+
+static void iwl4965_bg_set_monitor(struct work_struct *work)
+{
+	struct iwl_priv *priv = container_of(work,
+				struct iwl_priv, set_monitor);
+	int ret;
+
+	IWL_DEBUG(IWL_DL_STATE, "setting monitor mode\n");
+
+	mutex_lock(&priv->mutex);
+
+	ret = iwl4965_set_mode(priv, IEEE80211_IF_TYPE_MNTR);
+
+	if (ret) {
+		if (ret == -EAGAIN)
+			IWL_DEBUG(IWL_DL_STATE, "leave - not ready\n");
+		else
+			IWL_ERROR("iwl4965_set_mode() failed ret = %d\n", ret);
+	}
+
+	mutex_unlock(&priv->mutex);
+}
+
+static void iwl_bg_run_time_calib_work(struct work_struct *work)
+{
+	struct iwl_priv *priv = container_of(work, struct iwl_priv,
+			run_time_calib_work);
+
+	mutex_lock(&priv->mutex);
+
+	if (test_bit(STATUS_EXIT_PENDING, &priv->status) ||
+	    test_bit(STATUS_SCANNING, &priv->status)) {
+		mutex_unlock(&priv->mutex);
+		return;
+	}
+
+	if (priv->start_calib) {
+		iwl_chain_noise_calibration(priv, &priv->statistics);
+
+		iwl_sensitivity_calibration(priv, &priv->statistics);
+	}
+
+	mutex_unlock(&priv->mutex);
+	return;
+}
+
+static void iwl4965_bg_up(struct work_struct *data)
+{
+	struct iwl_priv *priv = container_of(data, struct iwl_priv, up);
+
+	if (test_bit(STATUS_EXIT_PENDING, &priv->status))
+		return;
+
+	mutex_lock(&priv->mutex);
+	__iwl4965_up(priv);
+	mutex_unlock(&priv->mutex);
+	iwl_rfkill_set_hw_state(priv);
+}
+
+static void iwl4965_bg_restart(struct work_struct *data)
+{
+	struct iwl_priv *priv = container_of(data, struct iwl_priv, restart);
+
+	if (test_bit(STATUS_EXIT_PENDING, &priv->status))
+		return;
+
+	iwl4965_down(priv);
+	queue_work(priv->workqueue, &priv->up);
+}
+
+static void iwl4965_bg_rx_replenish(struct work_struct *data)
+{
+	struct iwl_priv *priv =
+	    container_of(data, struct iwl_priv, rx_replenish);
+
+	if (test_bit(STATUS_EXIT_PENDING, &priv->status))
+		return;
+
+	mutex_lock(&priv->mutex);
+	iwl_rx_replenish(priv);
+	mutex_unlock(&priv->mutex);
+}
+
+#define IWL_DELAY_NEXT_SCAN (HZ*2)
+
+static void iwl4965_post_associate(struct iwl_priv *priv)
+{
+	struct ieee80211_conf *conf = NULL;
+	int ret = 0;
+	DECLARE_MAC_BUF(mac);
+	unsigned long flags;
+
+	if (priv->iw_mode == IEEE80211_IF_TYPE_AP) {
+		IWL_ERROR("%s Should not be called in AP mode\n", __func__);
+		return;
+	}
+
+	IWL_DEBUG_ASSOC("Associated as %d to: %s\n",
+			priv->assoc_id,
+			print_mac(mac, priv->active_rxon.bssid_addr));
+
+
+	if (test_bit(STATUS_EXIT_PENDING, &priv->status))
+		return;
+
+
+	if (!priv->vif || !priv->is_open)
+		return;
+
+	iwl_scan_cancel_timeout(priv, 200);
+
+	conf = ieee80211_get_hw_conf(priv->hw);
+
+	priv->staging_rxon.filter_flags &= ~RXON_FILTER_ASSOC_MSK;
+	iwl4965_commit_rxon(priv);
+
+	memset(&priv->rxon_timing, 0, sizeof(struct iwl4965_rxon_time_cmd));
+	iwl4965_setup_rxon_timing(priv);
+	ret = iwl_send_cmd_pdu(priv, REPLY_RXON_TIMING,
+			      sizeof(priv->rxon_timing), &priv->rxon_timing);
+	if (ret)
+		IWL_WARNING("REPLY_RXON_TIMING failed - "
+			    "Attempting to continue.\n");
+
+	priv->staging_rxon.filter_flags |= RXON_FILTER_ASSOC_MSK;
+
+	if (priv->current_ht_config.is_ht)
+		iwl_set_rxon_ht(priv, &priv->current_ht_config);
+
+	iwl_set_rxon_chain(priv);
+	priv->staging_rxon.assoc_id = cpu_to_le16(priv->assoc_id);
+
+	IWL_DEBUG_ASSOC("assoc id %d beacon interval %d\n",
+			priv->assoc_id, priv->beacon_int);
+
+	if (priv->assoc_capability & WLAN_CAPABILITY_SHORT_PREAMBLE)
+		priv->staging_rxon.flags |= RXON_FLG_SHORT_PREAMBLE_MSK;
+	else
+		priv->staging_rxon.flags &= ~RXON_FLG_SHORT_PREAMBLE_MSK;
+
+	if (priv->staging_rxon.flags & RXON_FLG_BAND_24G_MSK) {
+		if (priv->assoc_capability & WLAN_CAPABILITY_SHORT_SLOT_TIME)
+			priv->staging_rxon.flags |= RXON_FLG_SHORT_SLOT_MSK;
+		else
+			priv->staging_rxon.flags &= ~RXON_FLG_SHORT_SLOT_MSK;
+
+		if (priv->iw_mode == IEEE80211_IF_TYPE_IBSS)
+			priv->staging_rxon.flags &= ~RXON_FLG_SHORT_SLOT_MSK;
+
+	}
+
+	iwl4965_commit_rxon(priv);
+
+	switch (priv->iw_mode) {
+	case IEEE80211_IF_TYPE_STA:
+		break;
+
+	case IEEE80211_IF_TYPE_IBSS:
+
+		/* assume default assoc id */
+		priv->assoc_id = 1;
+
+		iwl_rxon_add_station(priv, priv->bssid, 0);
+		iwl4965_send_beacon_cmd(priv);
+
+		break;
+
+	default:
+		IWL_ERROR("%s Should not be called in %d mode\n",
+			  __func__, priv->iw_mode);
+		break;
+	}
+
+	/* Enable Rx differential gain and sensitivity calibrations */
+	iwl_chain_noise_reset(priv);
+	priv->start_calib = 1;
+
+	if (priv->iw_mode == IEEE80211_IF_TYPE_IBSS)
+		priv->assoc_station_added = 1;
+
+	spin_lock_irqsave(&priv->lock, flags);
+	iwl_activate_qos(priv, 0);
+	spin_unlock_irqrestore(&priv->lock, flags);
+
+	iwl_power_update_mode(priv, 0);
+	/* we have just associated, don't start scan too early */
+	priv->next_scan_jiffies = jiffies + IWL_DELAY_NEXT_SCAN;
+}
+
+static int iwl4965_mac_config(struct ieee80211_hw *hw, struct ieee80211_conf *conf);
+
+static void iwl_bg_scan_completed(struct work_struct *work)
+{
+	struct iwl_priv *priv =
+	    container_of(work, struct iwl_priv, scan_completed);
+
+	IWL_DEBUG_SCAN("SCAN complete scan\n");
+
+	if (test_bit(STATUS_EXIT_PENDING, &priv->status))
+		return;
+
+	if (test_bit(STATUS_CONF_PENDING, &priv->status))
+		iwl4965_mac_config(priv->hw, ieee80211_get_hw_conf(priv->hw));
+
+	ieee80211_scan_completed(priv->hw);
+
+	/* Since setting the TXPOWER may have been deferred while
+	 * performing the scan, fire one off */
+	mutex_lock(&priv->mutex);
+	iwl_set_tx_power(priv, priv->tx_power_user_lmt, true);
+	mutex_unlock(&priv->mutex);
+}
+
+/*****************************************************************************
+ *
+ * mac80211 entry point functions
+ *
+ *****************************************************************************/
+
+#define UCODE_READY_TIMEOUT	(4 * HZ)
+
+static int iwl4965_mac_start(struct ieee80211_hw *hw)
+{
+	struct iwl_priv *priv = hw->priv;
+	int ret;
+	u16 pci_cmd;
+
+	IWL_DEBUG_MAC80211("enter\n");
+
+	if (pci_enable_device(priv->pci_dev)) {
+		IWL_ERROR("Fail to pci_enable_device\n");
+		return -ENODEV;
+	}
+	pci_restore_state(priv->pci_dev);
+	pci_enable_msi(priv->pci_dev);
+
+	/* enable interrupts if needed: hw bug w/a */
+	pci_read_config_word(priv->pci_dev, PCI_COMMAND, &pci_cmd);
+	if (pci_cmd & PCI_COMMAND_INTX_DISABLE) {
+		pci_cmd &= ~PCI_COMMAND_INTX_DISABLE;
+		pci_write_config_word(priv->pci_dev, PCI_COMMAND, pci_cmd);
+	}
+
+	ret = request_irq(priv->pci_dev->irq, iwl4965_isr, IRQF_SHARED,
+			  DRV_NAME, priv);
+	if (ret) {
+		IWL_ERROR("Error allocating IRQ %d\n", priv->pci_dev->irq);
+		goto out_disable_msi;
+	}
+
+	/* we should be verifying the device is ready to be opened */
+	mutex_lock(&priv->mutex);
+
+	memset(&priv->staging_rxon, 0, sizeof(struct iwl_rxon_cmd));
+	/* fetch ucode file from disk, alloc and copy to bus-master buffers ...
+	 * ucode filename and max sizes are card-specific. */
+
+	if (!priv->ucode_code.len) {
+		ret = iwl4965_read_ucode(priv);
+		if (ret) {
+			IWL_ERROR("Could not read microcode: %d\n", ret);
+			mutex_unlock(&priv->mutex);
+			goto out_release_irq;
+		}
+	}
+
+	ret = __iwl4965_up(priv);
+
+	mutex_unlock(&priv->mutex);
+
+	iwl_rfkill_set_hw_state(priv);
+
+	if (ret)
+		goto out_release_irq;
+
+	if (iwl_is_rfkill(priv))
+		goto out;
+
+	IWL_DEBUG_INFO("Start UP work done.\n");
+
+	if (test_bit(STATUS_IN_SUSPEND, &priv->status))
+		return 0;
+
+	/* Wait for START_ALIVE from Run Time ucode. Otherwise callbacks from
+	 * mac80211 will not be run successfully. */
+	ret = wait_event_interruptible_timeout(priv->wait_command_queue,
+			test_bit(STATUS_READY, &priv->status),
+			UCODE_READY_TIMEOUT);
+	if (!ret) {
+		if (!test_bit(STATUS_READY, &priv->status)) {
+			IWL_ERROR("START_ALIVE timeout after %dms.\n",
+				jiffies_to_msecs(UCODE_READY_TIMEOUT));
+			ret = -ETIMEDOUT;
+			goto out_release_irq;
+		}
+	}
+
+out:
+	priv->is_open = 1;
+	IWL_DEBUG_MAC80211("leave\n");
+	return 0;
+
+out_release_irq:
+	free_irq(priv->pci_dev->irq, priv);
+out_disable_msi:
+	pci_disable_msi(priv->pci_dev);
+	pci_disable_device(priv->pci_dev);
+	priv->is_open = 0;
+	IWL_DEBUG_MAC80211("leave - failed\n");
+	return ret;
+}
+
+static void iwl4965_mac_stop(struct ieee80211_hw *hw)
+{
+	struct iwl_priv *priv = hw->priv;
+
+	IWL_DEBUG_MAC80211("enter\n");
+
+	if (!priv->is_open) {
+		IWL_DEBUG_MAC80211("leave - skip\n");
+		return;
+	}
+
+	priv->is_open = 0;
+
+	if (iwl_is_ready_rf(priv)) {
+		/* stop mac, cancel any scan request and clear
+		 * RXON_FILTER_ASSOC_MSK BIT
+		 */
+		mutex_lock(&priv->mutex);
+		iwl_scan_cancel_timeout(priv, 100);
+		mutex_unlock(&priv->mutex);
+	}
+
+	iwl4965_down(priv);
+
+	flush_workqueue(priv->workqueue);
+	free_irq(priv->pci_dev->irq, priv);
+	pci_disable_msi(priv->pci_dev);
+	pci_save_state(priv->pci_dev);
+	pci_disable_device(priv->pci_dev);
+
+	IWL_DEBUG_MAC80211("leave\n");
+}
+
+static int iwl4965_mac_tx(struct ieee80211_hw *hw, struct sk_buff *skb)
+{
+	struct iwl_priv *priv = hw->priv;
+
+	IWL_DEBUG_MACDUMP("enter\n");
+
+	if (priv->iw_mode == IEEE80211_IF_TYPE_MNTR) {
+		IWL_DEBUG_MAC80211("leave - monitor\n");
+		dev_kfree_skb_any(skb);
+		return 0;
+	}
+
+	IWL_DEBUG_TX("dev->xmit(%d bytes) at rate 0x%02x\n", skb->len,
+		     ieee80211_get_tx_rate(hw, IEEE80211_SKB_CB(skb))->bitrate);
+
+	if (iwl_tx_skb(priv, skb))
+		dev_kfree_skb_any(skb);
+
+	IWL_DEBUG_MACDUMP("leave\n");
+	return 0;
+}
+
+static int iwl4965_mac_add_interface(struct ieee80211_hw *hw,
+				 struct ieee80211_if_init_conf *conf)
+{
+	struct iwl_priv *priv = hw->priv;
+	unsigned long flags;
+	DECLARE_MAC_BUF(mac);
+
+	IWL_DEBUG_MAC80211("enter: type %d\n", conf->type);
+
+	if (priv->vif) {
+		IWL_DEBUG_MAC80211("leave - vif != NULL\n");
+		return -EOPNOTSUPP;
+	}
+
+	spin_lock_irqsave(&priv->lock, flags);
+	priv->vif = conf->vif;
+
+	spin_unlock_irqrestore(&priv->lock, flags);
+
+	mutex_lock(&priv->mutex);
+
+	if (conf->mac_addr) {
+		IWL_DEBUG_MAC80211("Set %s\n", print_mac(mac, conf->mac_addr));
+		memcpy(priv->mac_addr, conf->mac_addr, ETH_ALEN);
+	}
+
+	if (iwl4965_set_mode(priv, conf->type) == -EAGAIN)
+		/* we are not ready, will run again when ready */
+		set_bit(STATUS_MODE_PENDING, &priv->status);
+
+	mutex_unlock(&priv->mutex);
+
+	IWL_DEBUG_MAC80211("leave\n");
+	return 0;
+}
+
+/**
+ * iwl4965_mac_config - mac80211 config callback
+ *
+ * We ignore conf->flags & IEEE80211_CONF_SHORT_SLOT_TIME since it seems to
+ * be set inappropriately and the driver currently sets the hardware up to
+ * use it whenever needed.
+ */
+static int iwl4965_mac_config(struct ieee80211_hw *hw, struct ieee80211_conf *conf)
+{
+	struct iwl_priv *priv = hw->priv;
+	const struct iwl_channel_info *ch_info;
+	unsigned long flags;
+	int ret = 0;
+	u16 channel;
+
+	mutex_lock(&priv->mutex);
+	IWL_DEBUG_MAC80211("enter to channel %d\n", conf->channel->hw_value);
+
+	priv->add_radiotap = !!(conf->flags & IEEE80211_CONF_RADIOTAP);
+
+	if (conf->radio_enabled && iwl_radio_kill_sw_enable_radio(priv)) {
+		IWL_DEBUG_MAC80211("leave - RF-KILL - waiting for uCode\n");
+		goto out;
+	}
+
+	if (!conf->radio_enabled)
+		iwl_radio_kill_sw_disable_radio(priv);
+
+	if (!iwl_is_ready(priv)) {
+		IWL_DEBUG_MAC80211("leave - not ready\n");
+		ret = -EIO;
+		goto out;
+	}
+
+	if (unlikely(!priv->cfg->mod_params->disable_hw_scan &&
+		     test_bit(STATUS_SCANNING, &priv->status))) {
+		IWL_DEBUG_MAC80211("leave - scanning\n");
+		set_bit(STATUS_CONF_PENDING, &priv->status);
+		mutex_unlock(&priv->mutex);
+		return 0;
+	}
+
+	channel = ieee80211_frequency_to_channel(conf->channel->center_freq);
+	ch_info = iwl_get_channel_info(priv, conf->channel->band, channel);
+	if (!is_channel_valid(ch_info)) {
+		IWL_DEBUG_MAC80211("leave - invalid channel\n");
+		ret = -EINVAL;
+		goto out;
+	}
+
+	if (priv->iw_mode == IEEE80211_IF_TYPE_IBSS &&
+	    !is_channel_ibss(ch_info)) {
+		IWL_ERROR("channel %d in band %d not IBSS channel\n",
+			conf->channel->hw_value, conf->channel->band);
+		ret = -EINVAL;
+		goto out;
+	}
+
+	spin_lock_irqsave(&priv->lock, flags);
+
+
+	/* if we are switching from ht to 2.4 clear flags
+	 * from any ht related info since 2.4 does not
+	 * support ht */
+	if ((le16_to_cpu(priv->staging_rxon.channel) != channel)
+#ifdef IEEE80211_CONF_CHANNEL_SWITCH
+	    && !(conf->flags & IEEE80211_CONF_CHANNEL_SWITCH)
+#endif
+	)
+		priv->staging_rxon.flags = 0;
+
+	iwl_set_rxon_channel(priv, conf->channel->band, channel);
+
+	iwl_set_flags_for_band(priv, conf->channel->band);
+
+	/* The list of supported rates and rate mask can be different
+	 * for each band; since the band may have changed, reset
+	 * the rate mask to what mac80211 lists */
+	iwl4965_set_rate(priv);
+
+	spin_unlock_irqrestore(&priv->lock, flags);
+
+#ifdef IEEE80211_CONF_CHANNEL_SWITCH
+	if (conf->flags & IEEE80211_CONF_CHANNEL_SWITCH) {
+		iwl4965_hw_channel_switch(priv, conf->channel);
+		goto out;
+	}
+#endif
+
+	if (!conf->radio_enabled) {
+		IWL_DEBUG_MAC80211("leave - radio disabled\n");
+		goto out;
+	}
+
+	if (iwl_is_rfkill(priv)) {
+		IWL_DEBUG_MAC80211("leave - RF kill\n");
+		ret = -EIO;
+		goto out;
+	}
+
+	IWL_DEBUG_MAC80211("TX Power old=%d new=%d\n",
+			   priv->tx_power_user_lmt, conf->power_level);
+
+	iwl_set_tx_power(priv, conf->power_level, false);
+
+	iwl4965_set_rate(priv);
+
+	if (memcmp(&priv->active_rxon,
+		   &priv->staging_rxon, sizeof(priv->staging_rxon)))
+		iwl4965_commit_rxon(priv);
+	else
+		IWL_DEBUG_INFO("No re-sending same RXON configuration.\n");
+
+	IWL_DEBUG_MAC80211("leave\n");
+
+out:
+	clear_bit(STATUS_CONF_PENDING, &priv->status);
+	mutex_unlock(&priv->mutex);
+	return ret;
+}
+
+static void iwl4965_config_ap(struct iwl_priv *priv)
+{
+	int ret = 0;
+	unsigned long flags;
+
+	if (test_bit(STATUS_EXIT_PENDING, &priv->status))
+		return;
+
+	/* The following should be done only at AP bring up */
+	if (!(iwl_is_associated(priv))) {
+
+		/* RXON - unassoc (to set timing command) */
+		priv->staging_rxon.filter_flags &= ~RXON_FILTER_ASSOC_MSK;
+		iwl4965_commit_rxon(priv);
+
+		/* RXON Timing */
+		memset(&priv->rxon_timing, 0, sizeof(struct iwl4965_rxon_time_cmd));
+		iwl4965_setup_rxon_timing(priv);
+		ret = iwl_send_cmd_pdu(priv, REPLY_RXON_TIMING,
+				sizeof(priv->rxon_timing), &priv->rxon_timing);
+		if (ret)
+			IWL_WARNING("REPLY_RXON_TIMING failed - "
+					"Attempting to continue.\n");
+
+		iwl_set_rxon_chain(priv);
+
+		/* FIXME: what should be the assoc_id for AP? */
+		priv->staging_rxon.assoc_id = cpu_to_le16(priv->assoc_id);
+		if (priv->assoc_capability & WLAN_CAPABILITY_SHORT_PREAMBLE)
+			priv->staging_rxon.flags |=
+				RXON_FLG_SHORT_PREAMBLE_MSK;
+		else
+			priv->staging_rxon.flags &=
+				~RXON_FLG_SHORT_PREAMBLE_MSK;
+
+		if (priv->staging_rxon.flags & RXON_FLG_BAND_24G_MSK) {
+			if (priv->assoc_capability &
+				WLAN_CAPABILITY_SHORT_SLOT_TIME)
+				priv->staging_rxon.flags |=
+					RXON_FLG_SHORT_SLOT_MSK;
+			else
+				priv->staging_rxon.flags &=
+					~RXON_FLG_SHORT_SLOT_MSK;
+
+			if (priv->iw_mode == IEEE80211_IF_TYPE_IBSS)
+				priv->staging_rxon.flags &=
+					~RXON_FLG_SHORT_SLOT_MSK;
+		}
+		/* restore RXON assoc */
+		priv->staging_rxon.filter_flags |= RXON_FILTER_ASSOC_MSK;
+		iwl4965_commit_rxon(priv);
+		spin_lock_irqsave(&priv->lock, flags);
+		iwl_activate_qos(priv, 1);
+		spin_unlock_irqrestore(&priv->lock, flags);
+		iwl_rxon_add_station(priv, iwl_bcast_addr, 0);
+	}
+	iwl4965_send_beacon_cmd(priv);
+
+	/* FIXME - we need to add code here to detect a totally new
+	 * configuration, reset the AP, unassoc, rxon timing, assoc,
+	 * clear sta table, add BCAST sta... */
+}
+
+/* temporary */
+static int iwl4965_mac_beacon_update(struct ieee80211_hw *hw, struct sk_buff *skb);
+
+static int iwl4965_mac_config_interface(struct ieee80211_hw *hw,
+					struct ieee80211_vif *vif,
+				    struct ieee80211_if_conf *conf)
+{
+	struct iwl_priv *priv = hw->priv;
+	DECLARE_MAC_BUF(mac);
+	unsigned long flags;
+	int rc;
+
+	if (conf == NULL)
+		return -EIO;
+
+	if (priv->vif != vif) {
+		IWL_DEBUG_MAC80211("leave - priv->vif != vif\n");
+		return 0;
+	}
+
+	if (priv->iw_mode == IEEE80211_IF_TYPE_IBSS &&
+	    conf->changed & IEEE80211_IFCC_BEACON) {
+		struct sk_buff *beacon = ieee80211_beacon_get(hw, vif);
+		if (!beacon)
+			return -ENOMEM;
+		rc = iwl4965_mac_beacon_update(hw, beacon);
+		if (rc)
+			return rc;
+	}
+
+	if ((priv->iw_mode == IEEE80211_IF_TYPE_AP) &&
+	    (!conf->ssid_len)) {
+		IWL_DEBUG_MAC80211
+		    ("Leaving in AP mode because HostAPD is not ready.\n");
+		return 0;
+	}
+
+	if (!iwl_is_alive(priv))
+		return -EAGAIN;
+
+	mutex_lock(&priv->mutex);
+
+	if (conf->bssid)
+		IWL_DEBUG_MAC80211("bssid: %s\n",
+				   print_mac(mac, conf->bssid));
+
+/*
+ * very dubious code was here; the probe filtering flag is never set:
+ *
+	if (unlikely(test_bit(STATUS_SCANNING, &priv->status)) &&
+	    !(priv->hw->flags & IEEE80211_HW_NO_PROBE_FILTERING)) {
+ */
+
+	if (priv->iw_mode == IEEE80211_IF_TYPE_AP) {
+		if (!conf->bssid) {
+			conf->bssid = priv->mac_addr;
+			memcpy(priv->bssid, priv->mac_addr, ETH_ALEN);
+			IWL_DEBUG_MAC80211("bssid was set to: %s\n",
+					   print_mac(mac, conf->bssid));
+		}
+		if (priv->ibss_beacon)
+			dev_kfree_skb(priv->ibss_beacon);
+
+		priv->ibss_beacon = ieee80211_beacon_get(hw, vif);
+	}
+
+	if (iwl_is_rfkill(priv))
+		goto done;
+
+	if (conf->bssid && !is_zero_ether_addr(conf->bssid) &&
+	    !is_multicast_ether_addr(conf->bssid)) {
+		/* If there is currently a HW scan going on in the background
+		 * then we need to cancel it else the RXON below will fail. */
+		if (iwl_scan_cancel_timeout(priv, 100)) {
+			IWL_WARNING("Aborted scan still in progress "
+				    "after 100ms\n");
+			IWL_DEBUG_MAC80211("leaving - scan abort failed.\n");
+			mutex_unlock(&priv->mutex);
+			return -EAGAIN;
+		}
+		memcpy(priv->staging_rxon.bssid_addr, conf->bssid, ETH_ALEN);
+
+		/* TODO: Audit driver for usage of these members and see
+		 * if mac80211 deprecates them (priv->bssid looks like it
+		 * shouldn't be there, but I haven't scanned the IBSS code
+		 * to verify) - jpk */
+		memcpy(priv->bssid, conf->bssid, ETH_ALEN);
+
+		if (priv->iw_mode == IEEE80211_IF_TYPE_AP)
+			iwl4965_config_ap(priv);
+		else {
+			rc = iwl4965_commit_rxon(priv);
+			if ((priv->iw_mode == IEEE80211_IF_TYPE_STA) && rc)
+				iwl_rxon_add_station(
+					priv, priv->active_rxon.bssid_addr, 1);
+		}
+
+	} else {
+		iwl_scan_cancel_timeout(priv, 100);
+		priv->staging_rxon.filter_flags &= ~RXON_FILTER_ASSOC_MSK;
+		iwl4965_commit_rxon(priv);
+	}
+
+ done:
+	spin_lock_irqsave(&priv->lock, flags);
+	if (!conf->ssid_len)
+		memset(priv->essid, 0, IW_ESSID_MAX_SIZE);
+	else
+		memcpy(priv->essid, conf->ssid, conf->ssid_len);
+
+	priv->essid_len = conf->ssid_len;
+	spin_unlock_irqrestore(&priv->lock, flags);
+
+	IWL_DEBUG_MAC80211("leave\n");
+	mutex_unlock(&priv->mutex);
+
+	return 0;
+}
+
+static void iwl4965_configure_filter(struct ieee80211_hw *hw,
+				 unsigned int changed_flags,
+				 unsigned int *total_flags,
+				 int mc_count, struct dev_addr_list *mc_list)
+{
+	struct iwl_priv *priv = hw->priv;
+
+	if (changed_flags & (*total_flags) & FIF_OTHER_BSS) {
+		IWL_DEBUG_MAC80211("Enter: type %d (0x%x, 0x%x)\n",
+				   IEEE80211_IF_TYPE_MNTR,
+				   changed_flags, *total_flags);
+		/* queue work 'cuz mac80211 is holding a lock which
+		 * prevents us from issuing (synchronous) f/w cmds */
+		queue_work(priv->workqueue, &priv->set_monitor);
+	}
+	*total_flags &= FIF_OTHER_BSS | FIF_ALLMULTI |
+			FIF_BCN_PRBRESP_PROMISC | FIF_CONTROL;
+}
+
+static void iwl4965_mac_remove_interface(struct ieee80211_hw *hw,
+				     struct ieee80211_if_init_conf *conf)
+{
+	struct iwl_priv *priv = hw->priv;
+
+	IWL_DEBUG_MAC80211("enter\n");
+
+	mutex_lock(&priv->mutex);
+
+	if (iwl_is_ready_rf(priv)) {
+		iwl_scan_cancel_timeout(priv, 100);
+		priv->staging_rxon.filter_flags &= ~RXON_FILTER_ASSOC_MSK;
+		iwl4965_commit_rxon(priv);
+	}
+	if (priv->vif == conf->vif) {
+		priv->vif = NULL;
+		memset(priv->bssid, 0, ETH_ALEN);
+		memset(priv->essid, 0, IW_ESSID_MAX_SIZE);
+		priv->essid_len = 0;
+	}
+	mutex_unlock(&priv->mutex);
+
+	IWL_DEBUG_MAC80211("leave\n");
+
+}
+
+#define IWL_DELAY_NEXT_SCAN_AFTER_ASSOC (HZ*6)
+static void iwl4965_bss_info_changed(struct ieee80211_hw *hw,
+				     struct ieee80211_vif *vif,
+				     struct ieee80211_bss_conf *bss_conf,
+				     u32 changes)
+{
+	struct iwl_priv *priv = hw->priv;
+
+	IWL_DEBUG_MAC80211("changes = 0x%X\n", changes);
+
+	if (changes & BSS_CHANGED_ERP_PREAMBLE) {
+		IWL_DEBUG_MAC80211("ERP_PREAMBLE %d\n",
+				   bss_conf->use_short_preamble);
+		if (bss_conf->use_short_preamble)
+			priv->staging_rxon.flags |= RXON_FLG_SHORT_PREAMBLE_MSK;
+		else
+			priv->staging_rxon.flags &= ~RXON_FLG_SHORT_PREAMBLE_MSK;
+	}
+
+	if (changes & BSS_CHANGED_ERP_CTS_PROT) {
+		IWL_DEBUG_MAC80211("ERP_CTS %d\n", bss_conf->use_cts_prot);
+		if (bss_conf->use_cts_prot && (priv->band != IEEE80211_BAND_5GHZ))
+			priv->staging_rxon.flags |= RXON_FLG_TGG_PROTECT_MSK;
+		else
+			priv->staging_rxon.flags &= ~RXON_FLG_TGG_PROTECT_MSK;
+	}
+
+	if (changes & BSS_CHANGED_HT) {
+		IWL_DEBUG_MAC80211("HT %d\n", bss_conf->assoc_ht);
+		iwl4965_ht_conf(priv, bss_conf);
+		iwl_set_rxon_chain(priv);
+	}
+
+	if (changes & BSS_CHANGED_ASSOC) {
+		IWL_DEBUG_MAC80211("ASSOC %d\n", bss_conf->assoc);
+		/* This should never happen as this function should
+		 * never be called from interrupt context. */
+		if (WARN_ON_ONCE(in_interrupt()))
+			return;
+		if (bss_conf->assoc) {
+			priv->assoc_id = bss_conf->aid;
+			priv->beacon_int = bss_conf->beacon_int;
+			priv->power_data.dtim_period = bss_conf->dtim_period;
+			priv->timestamp = bss_conf->timestamp;
+			priv->assoc_capability = bss_conf->assoc_capability;
+			priv->next_scan_jiffies = jiffies +
+					IWL_DELAY_NEXT_SCAN_AFTER_ASSOC;
+			mutex_lock(&priv->mutex);
+			iwl4965_post_associate(priv);
+			mutex_unlock(&priv->mutex);
+		} else {
+			priv->assoc_id = 0;
+			IWL_DEBUG_MAC80211("DISASSOC %d\n", bss_conf->assoc);
+		}
+	} else if (changes && iwl_is_associated(priv) && priv->assoc_id) {
+			IWL_DEBUG_MAC80211("Associated Changes %d\n", changes);
+			iwl_send_rxon_assoc(priv);
+	}
+
+}
+
+static int iwl4965_mac_hw_scan(struct ieee80211_hw *hw, u8 *ssid, size_t len)
+{
+	int rc = 0;
+	unsigned long flags;
+	struct iwl_priv *priv = hw->priv;
+
+	IWL_DEBUG_MAC80211("enter\n");
+
+	mutex_lock(&priv->mutex);
+	spin_lock_irqsave(&priv->lock, flags);
+
+	if (!iwl_is_ready_rf(priv)) {
+		rc = -EIO;
+		IWL_DEBUG_MAC80211("leave - not ready or exit pending\n");
+		goto out_unlock;
+	}
+
+	if (priv->iw_mode == IEEE80211_IF_TYPE_AP) {	/* APs don't scan */
+		rc = -EIO;
+		IWL_ERROR("ERROR: APs don't scan\n");
+		goto out_unlock;
+	}
+
+	/* we don't schedule scan within next_scan_jiffies period */
+	if (priv->next_scan_jiffies &&
+			time_after(priv->next_scan_jiffies, jiffies)) {
+		rc = -EAGAIN;
+		goto out_unlock;
+	}
+	/* if we just finished scan ask for delay */
+	if (priv->last_scan_jiffies && time_after(priv->last_scan_jiffies +
+				IWL_DELAY_NEXT_SCAN, jiffies)) {
+		rc = -EAGAIN;
+		goto out_unlock;
+	}
+	if (len) {
+		IWL_DEBUG_SCAN("direct scan for %s [%d]\n ",
+			       iwl_escape_essid(ssid, len), (int)len);
+
+		priv->one_direct_scan = 1;
+		priv->direct_ssid_len = (u8)
+		    min((u8) len, (u8) IW_ESSID_MAX_SIZE);
+		memcpy(priv->direct_ssid, ssid, priv->direct_ssid_len);
+	} else
+		priv->one_direct_scan = 0;
+
+	rc = iwl_scan_initiate(priv);
+
+	IWL_DEBUG_MAC80211("leave\n");
+
+out_unlock:
+	spin_unlock_irqrestore(&priv->lock, flags);
+	mutex_unlock(&priv->mutex);
+
+	return rc;
+}
+
+static void iwl4965_mac_update_tkip_key(struct ieee80211_hw *hw,
+			struct ieee80211_key_conf *keyconf, const u8 *addr,
+			u32 iv32, u16 *phase1key)
+{
+	struct iwl_priv *priv = hw->priv;
+	u8 sta_id = IWL_INVALID_STATION;
+	unsigned long flags;
+	__le16 key_flags = 0;
+	int i;
+	DECLARE_MAC_BUF(mac);
+
+	IWL_DEBUG_MAC80211("enter\n");
+
+	sta_id = iwl_find_station(priv, addr);
+	if (sta_id == IWL_INVALID_STATION) {
+		IWL_DEBUG_MAC80211("leave - %s not in station map.\n",
+				   print_mac(mac, addr));
+		return;
+	}
+
+	iwl_scan_cancel_timeout(priv, 100);
+
+	key_flags |= (STA_KEY_FLG_TKIP | STA_KEY_FLG_MAP_KEY_MSK);
+	key_flags |= cpu_to_le16(keyconf->keyidx << STA_KEY_FLG_KEYID_POS);
+	key_flags &= ~STA_KEY_FLG_INVALID;
+
+	if (sta_id == priv->hw_params.bcast_sta_id)
+		key_flags |= STA_KEY_MULTICAST_MSK;
+
+	spin_lock_irqsave(&priv->sta_lock, flags);
+
+	priv->stations[sta_id].sta.key.key_flags = key_flags;
+	priv->stations[sta_id].sta.key.tkip_rx_tsc_byte2 = (u8) iv32;
+
+	for (i = 0; i < 5; i++)
+		priv->stations[sta_id].sta.key.tkip_rx_ttak[i] =
+			cpu_to_le16(phase1key[i]);
+
+	priv->stations[sta_id].sta.sta.modify_mask = STA_MODIFY_KEY_MASK;
+	priv->stations[sta_id].sta.mode = STA_CONTROL_MODIFY_MSK;
+
+	iwl_send_add_sta(priv, &priv->stations[sta_id].sta, CMD_ASYNC);
+
+	spin_unlock_irqrestore(&priv->sta_lock, flags);
+
+	IWL_DEBUG_MAC80211("leave\n");
+}
+
+static int iwl4965_mac_set_key(struct ieee80211_hw *hw, enum set_key_cmd cmd,
+			   const u8 *local_addr, const u8 *addr,
+			   struct ieee80211_key_conf *key)
+{
+	struct iwl_priv *priv = hw->priv;
+	DECLARE_MAC_BUF(mac);
+	int ret = 0;
+	u8 sta_id = IWL_INVALID_STATION;
+	u8 is_default_wep_key = 0;
+
+	IWL_DEBUG_MAC80211("enter\n");
+
+	if (priv->hw_params.sw_crypto) {
+		IWL_DEBUG_MAC80211("leave - hwcrypto disabled\n");
+		return -EOPNOTSUPP;
+	}
+
+	if (is_zero_ether_addr(addr))
+		/* only support pairwise keys */
+		return -EOPNOTSUPP;
+
+	sta_id = iwl_find_station(priv, addr);
+	if (sta_id == IWL_INVALID_STATION) {
+		IWL_DEBUG_MAC80211("leave - %s not in station map.\n",
+				   print_mac(mac, addr));
+		return -EINVAL;
+
+	}
+
+	mutex_lock(&priv->mutex);
+	iwl_scan_cancel_timeout(priv, 100);
+	mutex_unlock(&priv->mutex);
+
+	/* If we are getting WEP group key and we didn't receive any key mapping
+	 * so far, we are in legacy wep mode (group key only), otherwise we are
+	 * in 1X mode.
+	 * In legacy wep mode, we use another host command to the uCode */
+	if (key->alg == ALG_WEP && sta_id == priv->hw_params.bcast_sta_id &&
+		priv->iw_mode != IEEE80211_IF_TYPE_AP) {
+		if (cmd == SET_KEY)
+			is_default_wep_key = !priv->key_mapping_key;
+		else
+			is_default_wep_key =
+					(key->hw_key_idx == HW_KEY_DEFAULT);
+	}
+
+	switch (cmd) {
+	case SET_KEY:
+		if (is_default_wep_key)
+			ret = iwl_set_default_wep_key(priv, key);
+		else
+			ret = iwl_set_dynamic_key(priv, key, sta_id);
+
+		IWL_DEBUG_MAC80211("enable hwcrypto key\n");
+		break;
+	case DISABLE_KEY:
+		if (is_default_wep_key)
+			ret = iwl_remove_default_wep_key(priv, key);
+		else
+			ret = iwl_remove_dynamic_key(priv, key, sta_id);
+
+		IWL_DEBUG_MAC80211("disable hwcrypto key\n");
+		break;
+	default:
+		ret = -EINVAL;
+	}
+
+	IWL_DEBUG_MAC80211("leave\n");
+
+	return ret;
+}
+
+static int iwl4965_mac_conf_tx(struct ieee80211_hw *hw, u16 queue,
+			   const struct ieee80211_tx_queue_params *params)
+{
+	struct iwl_priv *priv = hw->priv;
+	unsigned long flags;
+	int q;
+
+	IWL_DEBUG_MAC80211("enter\n");
+
+	if (!iwl_is_ready_rf(priv)) {
+		IWL_DEBUG_MAC80211("leave - RF not ready\n");
+		return -EIO;
+	}
+
+	if (queue >= AC_NUM) {
+		IWL_DEBUG_MAC80211("leave - queue >= AC_NUM %d\n", queue);
+		return 0;
+	}
+
+	if (!priv->qos_data.qos_enable) {
+		priv->qos_data.qos_active = 0;
+		IWL_DEBUG_MAC80211("leave - qos not enabled\n");
+		return 0;
+	}
+	q = AC_NUM - 1 - queue;
+
+	spin_lock_irqsave(&priv->lock, flags);
+
+	priv->qos_data.def_qos_parm.ac[q].cw_min = cpu_to_le16(params->cw_min);
+	priv->qos_data.def_qos_parm.ac[q].cw_max = cpu_to_le16(params->cw_max);
+	priv->qos_data.def_qos_parm.ac[q].aifsn = params->aifs;
+	priv->qos_data.def_qos_parm.ac[q].edca_txop =
+			cpu_to_le16((params->txop * 32));
+
+	priv->qos_data.def_qos_parm.ac[q].reserved1 = 0;
+	priv->qos_data.qos_active = 1;
+
+	if (priv->iw_mode == IEEE80211_IF_TYPE_AP)
+		iwl_activate_qos(priv, 1);
+	else if (priv->assoc_id && iwl_is_associated(priv))
+		iwl_activate_qos(priv, 0);
+
+	spin_unlock_irqrestore(&priv->lock, flags);
+
+	IWL_DEBUG_MAC80211("leave\n");
+	return 0;
+}
+
+static int iwl4965_mac_ampdu_action(struct ieee80211_hw *hw,
+			     enum ieee80211_ampdu_mlme_action action,
+			     const u8 *addr, u16 tid, u16 *ssn)
+{
+	struct iwl_priv *priv = hw->priv;
+	DECLARE_MAC_BUF(mac);
+
+	IWL_DEBUG_HT("A-MPDU action on addr %s tid %d\n",
+		     print_mac(mac, addr), tid);
+
+	if (!(priv->cfg->sku & IWL_SKU_N))
+		return -EACCES;
+
+	switch (action) {
+	case IEEE80211_AMPDU_RX_START:
+		IWL_DEBUG_HT("start Rx\n");
+		return iwl_rx_agg_start(priv, addr, tid, *ssn);
+	case IEEE80211_AMPDU_RX_STOP:
+		IWL_DEBUG_HT("stop Rx\n");
+		return iwl_rx_agg_stop(priv, addr, tid);
+	case IEEE80211_AMPDU_TX_START:
+		IWL_DEBUG_HT("start Tx\n");
+		return iwl_tx_agg_start(priv, addr, tid, ssn);
+	case IEEE80211_AMPDU_TX_STOP:
+		IWL_DEBUG_HT("stop Tx\n");
+		return iwl_tx_agg_stop(priv, addr, tid);
+	default:
+		IWL_DEBUG_HT("unknown\n");
+		return -EINVAL;
+		break;
+	}
+	return 0;
+}
+static int iwl4965_mac_get_tx_stats(struct ieee80211_hw *hw,
+				struct ieee80211_tx_queue_stats *stats)
+{
+	struct iwl_priv *priv = hw->priv;
+	int i, avail;
+	struct iwl_tx_queue *txq;
+	struct iwl_queue *q;
+	unsigned long flags;
+
+	IWL_DEBUG_MAC80211("enter\n");
+
+	if (!iwl_is_ready_rf(priv)) {
+		IWL_DEBUG_MAC80211("leave - RF not ready\n");
+		return -EIO;
+	}
+
+	spin_lock_irqsave(&priv->lock, flags);
+
+	for (i = 0; i < AC_NUM; i++) {
+		txq = &priv->txq[i];
+		q = &txq->q;
+		avail = iwl_queue_space(q);
+
+		stats[i].len = q->n_window - avail;
+		stats[i].limit = q->n_window - q->high_mark;
+		stats[i].count = q->n_window;
+
+	}
+	spin_unlock_irqrestore(&priv->lock, flags);
+
+	IWL_DEBUG_MAC80211("leave\n");
+
+	return 0;
+}
+
+static int iwl4965_mac_get_stats(struct ieee80211_hw *hw,
+			     struct ieee80211_low_level_stats *stats)
+{
+	struct iwl_priv *priv = hw->priv;
+
+	priv = hw->priv;
+	IWL_DEBUG_MAC80211("enter\n");
+	IWL_DEBUG_MAC80211("leave\n");
+
+	return 0;
+}
+
+static void iwl4965_mac_reset_tsf(struct ieee80211_hw *hw)
+{
+	struct iwl_priv *priv = hw->priv;
+	unsigned long flags;
+
+	mutex_lock(&priv->mutex);
+	IWL_DEBUG_MAC80211("enter\n");
+
+	spin_lock_irqsave(&priv->lock, flags);
+	memset(&priv->current_ht_config, 0, sizeof(struct iwl_ht_info));
+	spin_unlock_irqrestore(&priv->lock, flags);
+
+	iwl_reset_qos(priv);
+
+	spin_lock_irqsave(&priv->lock, flags);
+	priv->assoc_id = 0;
+	priv->assoc_capability = 0;
+	priv->assoc_station_added = 0;
+
+	/* new association get rid of ibss beacon skb */
+	if (priv->ibss_beacon)
+		dev_kfree_skb(priv->ibss_beacon);
+
+	priv->ibss_beacon = NULL;
+
+	priv->beacon_int = priv->hw->conf.beacon_int;
+	priv->timestamp = 0;
+	if ((priv->iw_mode == IEEE80211_IF_TYPE_STA))
+		priv->beacon_int = 0;
+
+	spin_unlock_irqrestore(&priv->lock, flags);
+
+	if (!iwl_is_ready_rf(priv)) {
+		IWL_DEBUG_MAC80211("leave - not ready\n");
+		mutex_unlock(&priv->mutex);
+		return;
+	}
+
+	/* we are restarting association process
+	 * clear RXON_FILTER_ASSOC_MSK bit
+	 */
+	if (priv->iw_mode != IEEE80211_IF_TYPE_AP) {
+		iwl_scan_cancel_timeout(priv, 100);
+		priv->staging_rxon.filter_flags &= ~RXON_FILTER_ASSOC_MSK;
+		iwl4965_commit_rxon(priv);
+	}
+
+	iwl_power_update_mode(priv, 0);
+
+	/* Per mac80211.h: This is only used in IBSS mode... */
+	if (priv->iw_mode != IEEE80211_IF_TYPE_IBSS) {
+
+		IWL_DEBUG_MAC80211("leave - not in IBSS\n");
+		mutex_unlock(&priv->mutex);
+		return;
+	}
+
+	iwl4965_set_rate(priv);
+
+	mutex_unlock(&priv->mutex);
+
+	IWL_DEBUG_MAC80211("leave\n");
+}
+
+static int iwl4965_mac_beacon_update(struct ieee80211_hw *hw, struct sk_buff *skb)
+{
+	struct iwl_priv *priv = hw->priv;
+	unsigned long flags;
+	__le64 timestamp;
+
+	mutex_lock(&priv->mutex);
+	IWL_DEBUG_MAC80211("enter\n");
+
+	if (!iwl_is_ready_rf(priv)) {
+		IWL_DEBUG_MAC80211("leave - RF not ready\n");
+		mutex_unlock(&priv->mutex);
+		return -EIO;
+	}
+
+	if (priv->iw_mode != IEEE80211_IF_TYPE_IBSS) {
+		IWL_DEBUG_MAC80211("leave - not IBSS\n");
+		mutex_unlock(&priv->mutex);
+		return -EIO;
+	}
+
+	spin_lock_irqsave(&priv->lock, flags);
+
+	if (priv->ibss_beacon)
+		dev_kfree_skb(priv->ibss_beacon);
+
+	priv->ibss_beacon = skb;
+
+	priv->assoc_id = 0;
+	timestamp = ((struct ieee80211_mgmt *)skb->data)->u.beacon.timestamp;
+	priv->timestamp = le64_to_cpu(timestamp);
+
+	IWL_DEBUG_MAC80211("leave\n");
+	spin_unlock_irqrestore(&priv->lock, flags);
+
+	iwl_reset_qos(priv);
+
+	iwl4965_post_associate(priv);
+
+	mutex_unlock(&priv->mutex);
+
+	return 0;
+}
+
+/*****************************************************************************
+ *
+ * sysfs attributes
+ *
+ *****************************************************************************/
+
+#ifdef CONFIG_IWLWIFI_DEBUG
+
+/*
+ * The following adds a new attribute to the sysfs representation
+ * of this device driver (i.e. a new file in /sys/bus/pci/drivers/iwl/)
+ * used for controlling the debug level.
+ *
+ * See the level definitions in iwl for details.
+ */
+
+static ssize_t show_debug_level(struct device *d,
+				struct device_attribute *attr, char *buf)
+{
+	struct iwl_priv *priv = d->driver_data;
+
+	return sprintf(buf, "0x%08X\n", priv->debug_level);
+}
+static ssize_t store_debug_level(struct device *d,
+				struct device_attribute *attr,
+				 const char *buf, size_t count)
+{
+	struct iwl_priv *priv = d->driver_data;
+	char *p = (char *)buf;
+	u32 val;
+
+	val = simple_strtoul(p, &p, 0);
+	if (p == buf)
+		printk(KERN_INFO DRV_NAME
+		       ": %s is not in hex or decimal form.\n", buf);
+	else
+		priv->debug_level = val;
+
+	return strnlen(buf, count);
+}
+
+static DEVICE_ATTR(debug_level, S_IWUSR | S_IRUGO,
+			show_debug_level, store_debug_level);
+
+
+#endif /* CONFIG_IWLWIFI_DEBUG */
+
+
+static ssize_t show_version(struct device *d,
+				struct device_attribute *attr, char *buf)
+{
+	struct iwl_priv *priv = d->driver_data;
+	struct iwl_alive_resp *palive = &priv->card_alive;
+	ssize_t pos = 0;
+	u16 eeprom_ver;
+
+	if (palive->is_valid)
+		pos += sprintf(buf + pos,
+				"fw version: 0x%01X.0x%01X.0x%01X.0x%01X\n"
+				"fw type: 0x%01X 0x%01X\n",
+				palive->ucode_major, palive->ucode_minor,
+				palive->sw_rev[0], palive->sw_rev[1],
+				palive->ver_type, palive->ver_subtype);
+	else
+		pos += sprintf(buf + pos, "fw not loaded\n");
+
+	if (priv->eeprom) {
+		eeprom_ver = iwl_eeprom_query16(priv, EEPROM_VERSION);
+		pos += sprintf(buf + pos, "EEPROM version: 0x%x\n",
+				 eeprom_ver);
+	} else {
+		pos += sprintf(buf + pos, "EEPROM not initialzed\n");
+	}
+
+	return pos;
+}
+
+static DEVICE_ATTR(version, S_IWUSR | S_IRUGO, show_version, NULL);
+
+static ssize_t show_temperature(struct device *d,
+				struct device_attribute *attr, char *buf)
+{
+	struct iwl_priv *priv = (struct iwl_priv *)d->driver_data;
+
+	if (!iwl_is_alive(priv))
+		return -EAGAIN;
+
+	return sprintf(buf, "%d\n", priv->temperature);
+}
+
+static DEVICE_ATTR(temperature, S_IRUGO, show_temperature, NULL);
+
+static ssize_t show_tx_power(struct device *d,
+			     struct device_attribute *attr, char *buf)
+{
+	struct iwl_priv *priv = (struct iwl_priv *)d->driver_data;
+	return sprintf(buf, "%d\n", priv->tx_power_user_lmt);
+}
+
+static ssize_t store_tx_power(struct device *d,
+			      struct device_attribute *attr,
+			      const char *buf, size_t count)
+{
+	struct iwl_priv *priv = (struct iwl_priv *)d->driver_data;
+	char *p = (char *)buf;
+	u32 val;
+
+	val = simple_strtoul(p, &p, 10);
+	if (p == buf)
+		printk(KERN_INFO DRV_NAME
+		       ": %s is not in decimal form.\n", buf);
+	else
+		iwl_set_tx_power(priv, val, false);
+
+	return count;
+}
+
+static DEVICE_ATTR(tx_power, S_IWUSR | S_IRUGO, show_tx_power, store_tx_power);
+
+static ssize_t show_flags(struct device *d,
+			  struct device_attribute *attr, char *buf)
+{
+	struct iwl_priv *priv = (struct iwl_priv *)d->driver_data;
+
+	return sprintf(buf, "0x%04X\n", priv->active_rxon.flags);
+}
+
+static ssize_t store_flags(struct device *d,
+			   struct device_attribute *attr,
+			   const char *buf, size_t count)
+{
+	struct iwl_priv *priv = (struct iwl_priv *)d->driver_data;
+	u32 flags = simple_strtoul(buf, NULL, 0);
+
+	mutex_lock(&priv->mutex);
+	if (le32_to_cpu(priv->staging_rxon.flags) != flags) {
+		/* Cancel any currently running scans... */
+		if (iwl_scan_cancel_timeout(priv, 100))
+			IWL_WARNING("Could not cancel scan.\n");
+		else {
+			IWL_DEBUG_INFO("Committing rxon.flags = 0x%04X\n",
+				       flags);
+			priv->staging_rxon.flags = cpu_to_le32(flags);
+			iwl4965_commit_rxon(priv);
+		}
+	}
+	mutex_unlock(&priv->mutex);
+
+	return count;
+}
+
+static DEVICE_ATTR(flags, S_IWUSR | S_IRUGO, show_flags, store_flags);
+
+static ssize_t show_filter_flags(struct device *d,
+				 struct device_attribute *attr, char *buf)
+{
+	struct iwl_priv *priv = (struct iwl_priv *)d->driver_data;
+
+	return sprintf(buf, "0x%04X\n",
+		le32_to_cpu(priv->active_rxon.filter_flags));
+}
+
+static ssize_t store_filter_flags(struct device *d,
+				  struct device_attribute *attr,
+				  const char *buf, size_t count)
+{
+	struct iwl_priv *priv = (struct iwl_priv *)d->driver_data;
+	u32 filter_flags = simple_strtoul(buf, NULL, 0);
+
+	mutex_lock(&priv->mutex);
+	if (le32_to_cpu(priv->staging_rxon.filter_flags) != filter_flags) {
+		/* Cancel any currently running scans... */
+		if (iwl_scan_cancel_timeout(priv, 100))
+			IWL_WARNING("Could not cancel scan.\n");
+		else {
+			IWL_DEBUG_INFO("Committing rxon.filter_flags = "
+				       "0x%04X\n", filter_flags);
+			priv->staging_rxon.filter_flags =
+				cpu_to_le32(filter_flags);
+			iwl4965_commit_rxon(priv);
+		}
+	}
+	mutex_unlock(&priv->mutex);
+
+	return count;
+}
+
+static DEVICE_ATTR(filter_flags, S_IWUSR | S_IRUGO, show_filter_flags,
+		   store_filter_flags);
+
+#ifdef CONFIG_IWLAGN_SPECTRUM_MEASUREMENT
+
+static ssize_t show_measurement(struct device *d,
+				struct device_attribute *attr, char *buf)
+{
+	struct iwl_priv *priv = dev_get_drvdata(d);
+	struct iwl4965_spectrum_notification measure_report;
+	u32 size = sizeof(measure_report), len = 0, ofs = 0;
+	u8 *data = (u8 *)&measure_report;
+	unsigned long flags;
+
+	spin_lock_irqsave(&priv->lock, flags);
+	if (!(priv->measurement_status & MEASUREMENT_READY)) {
+		spin_unlock_irqrestore(&priv->lock, flags);
+		return 0;
+	}
+	memcpy(&measure_report, &priv->measure_report, size);
+	priv->measurement_status = 0;
+	spin_unlock_irqrestore(&priv->lock, flags);
+
+	while (size && (PAGE_SIZE - len)) {
+		hex_dump_to_buffer(data + ofs, size, 16, 1, buf + len,
+				   PAGE_SIZE - len, 1);
+		len = strlen(buf);
+		if (PAGE_SIZE - len)
+			buf[len++] = '\n';
+
+		ofs += 16;
+		size -= min(size, 16U);
+	}
+
+	return len;
+}
+
+static ssize_t store_measurement(struct device *d,
+				 struct device_attribute *attr,
+				 const char *buf, size_t count)
+{
+	struct iwl_priv *priv = dev_get_drvdata(d);
+	struct ieee80211_measurement_params params = {
+		.channel = le16_to_cpu(priv->active_rxon.channel),
+		.start_time = cpu_to_le64(priv->last_tsf),
+		.duration = cpu_to_le16(1),
+	};
+	u8 type = IWL_MEASURE_BASIC;
+	u8 buffer[32];
+	u8 channel;
+
+	if (count) {
+		char *p = buffer;
+		strncpy(buffer, buf, min(sizeof(buffer), count));
+		channel = simple_strtoul(p, NULL, 0);
+		if (channel)
+			params.channel = channel;
+
+		p = buffer;
+		while (*p && *p != ' ')
+			p++;
+		if (*p)
+			type = simple_strtoul(p + 1, NULL, 0);
+	}
+
+	IWL_DEBUG_INFO("Invoking measurement of type %d on "
+		       "channel %d (for '%s')\n", type, params.channel, buf);
+	iwl4965_get_measurement(priv, &params, type);
+
+	return count;
+}
+
+static DEVICE_ATTR(measurement, S_IRUSR | S_IWUSR,
+		   show_measurement, store_measurement);
+#endif /* CONFIG_IWLAGN_SPECTRUM_MEASUREMENT */
+
+static ssize_t store_retry_rate(struct device *d,
+				struct device_attribute *attr,
+				const char *buf, size_t count)
+{
+	struct iwl_priv *priv = dev_get_drvdata(d);
+
+	priv->retry_rate = simple_strtoul(buf, NULL, 0);
+	if (priv->retry_rate <= 0)
+		priv->retry_rate = 1;
+
+	return count;
+}
+
+static ssize_t show_retry_rate(struct device *d,
+			       struct device_attribute *attr, char *buf)
+{
+	struct iwl_priv *priv = dev_get_drvdata(d);
+	return sprintf(buf, "%d", priv->retry_rate);
+}
+
+static DEVICE_ATTR(retry_rate, S_IWUSR | S_IRUSR, show_retry_rate,
+		   store_retry_rate);
+
+static ssize_t store_power_level(struct device *d,
+				 struct device_attribute *attr,
+				 const char *buf, size_t count)
+{
+	struct iwl_priv *priv = dev_get_drvdata(d);
+	int ret;
+	int mode;
+
+	mode = simple_strtoul(buf, NULL, 0);
+	mutex_lock(&priv->mutex);
+
+	if (!iwl_is_ready(priv)) {
+		ret = -EAGAIN;
+		goto out;
+	}
+
+	ret = iwl_power_set_user_mode(priv, mode);
+	if (ret) {
+		IWL_DEBUG_MAC80211("failed setting power mode.\n");
+		goto out;
+	}
+	ret = count;
+
+ out:
+	mutex_unlock(&priv->mutex);
+	return ret;
+}
+
+static ssize_t show_power_level(struct device *d,
+				struct device_attribute *attr, char *buf)
+{
+	struct iwl_priv *priv = dev_get_drvdata(d);
+	int mode = priv->power_data.user_power_setting;
+	int system = priv->power_data.system_power_setting;
+	int level = priv->power_data.power_mode;
+	char *p = buf;
+
+	switch (system) {
+	case IWL_POWER_SYS_AUTO:
+		p += sprintf(p, "SYSTEM:auto");
+		break;
+	case IWL_POWER_SYS_AC:
+		p += sprintf(p, "SYSTEM:ac");
+		break;
+	case IWL_POWER_SYS_BATTERY:
+		p += sprintf(p, "SYSTEM:battery");
+		break;
+	}
+
+	p += sprintf(p, "\tMODE:%s", (mode < IWL_POWER_AUTO)?"fixed":"auto");
+	p += sprintf(p, "\tINDEX:%d", level);
+	p += sprintf(p, "\n");
+	return p - buf + 1;
+}
+
+static DEVICE_ATTR(power_level, S_IWUSR | S_IRUSR, show_power_level,
+		   store_power_level);
+
+static ssize_t show_channels(struct device *d,
+			     struct device_attribute *attr, char *buf)
+{
+
+	struct iwl_priv *priv = dev_get_drvdata(d);
+	struct ieee80211_channel *channels = NULL;
+	const struct ieee80211_supported_band *supp_band = NULL;
+	int len = 0, i;
+	int count = 0;
+
+	if (!test_bit(STATUS_GEO_CONFIGURED, &priv->status))
+		return -EAGAIN;
+
+	supp_band = iwl_get_hw_mode(priv, IEEE80211_BAND_2GHZ);
+	channels = supp_band->channels;
+	count = supp_band->n_channels;
+
+	len += sprintf(&buf[len],
+			"Displaying %d channels in 2.4GHz band "
+			"(802.11bg):\n", count);
+
+	for (i = 0; i < count; i++)
+		len += sprintf(&buf[len], "%d: %ddBm: BSS%s%s, %s.\n",
+				ieee80211_frequency_to_channel(
+				channels[i].center_freq),
+				channels[i].max_power,
+				channels[i].flags & IEEE80211_CHAN_RADAR ?
+				" (IEEE 802.11h required)" : "",
+				(!(channels[i].flags & IEEE80211_CHAN_NO_IBSS)
+				|| (channels[i].flags &
+				IEEE80211_CHAN_RADAR)) ? "" :
+				", IBSS",
+				channels[i].flags &
+				IEEE80211_CHAN_PASSIVE_SCAN ?
+				"passive only" : "active/passive");
+
+	supp_band = iwl_get_hw_mode(priv, IEEE80211_BAND_5GHZ);
+	channels = supp_band->channels;
+	count = supp_band->n_channels;
+
+	len += sprintf(&buf[len], "Displaying %d channels in 5.2GHz band "
+			"(802.11a):\n", count);
+
+	for (i = 0; i < count; i++)
+		len += sprintf(&buf[len], "%d: %ddBm: BSS%s%s, %s.\n",
+				ieee80211_frequency_to_channel(
+				channels[i].center_freq),
+				channels[i].max_power,
+				channels[i].flags & IEEE80211_CHAN_RADAR ?
+				" (IEEE 802.11h required)" : "",
+				((channels[i].flags & IEEE80211_CHAN_NO_IBSS)
+				|| (channels[i].flags &
+				IEEE80211_CHAN_RADAR)) ? "" :
+				", IBSS",
+				channels[i].flags &
+				IEEE80211_CHAN_PASSIVE_SCAN ?
+				"passive only" : "active/passive");
+
+	return len;
+}
+
+static DEVICE_ATTR(channels, S_IRUSR, show_channels, NULL);
+
+static ssize_t show_statistics(struct device *d,
+			       struct device_attribute *attr, char *buf)
+{
+	struct iwl_priv *priv = dev_get_drvdata(d);
+	u32 size = sizeof(struct iwl_notif_statistics);
+	u32 len = 0, ofs = 0;
+	u8 *data = (u8 *)&priv->statistics;
+	int rc = 0;
+
+	if (!iwl_is_alive(priv))
+		return -EAGAIN;
+
+	mutex_lock(&priv->mutex);
+	rc = iwl_send_statistics_request(priv, 0);
+	mutex_unlock(&priv->mutex);
+
+	if (rc) {
+		len = sprintf(buf,
+			      "Error sending statistics request: 0x%08X\n", rc);
+		return len;
+	}
+
+	while (size && (PAGE_SIZE - len)) {
+		hex_dump_to_buffer(data + ofs, size, 16, 1, buf + len,
+				   PAGE_SIZE - len, 1);
+		len = strlen(buf);
+		if (PAGE_SIZE - len)
+			buf[len++] = '\n';
+
+		ofs += 16;
+		size -= min(size, 16U);
+	}
+
+	return len;
+}
+
+static DEVICE_ATTR(statistics, S_IRUGO, show_statistics, NULL);
+
+static ssize_t show_status(struct device *d,
+			   struct device_attribute *attr, char *buf)
+{
+	struct iwl_priv *priv = (struct iwl_priv *)d->driver_data;
+	if (!iwl_is_alive(priv))
+		return -EAGAIN;
+	return sprintf(buf, "0x%08x\n", (int)priv->status);
+}
+
+static DEVICE_ATTR(status, S_IRUGO, show_status, NULL);
+
+/*****************************************************************************
+ *
+ * driver setup and teardown
+ *
+ *****************************************************************************/
+
+static void iwl_setup_deferred_work(struct iwl_priv *priv)
+{
+	priv->workqueue = create_workqueue(DRV_NAME);
+
+	init_waitqueue_head(&priv->wait_command_queue);
+
+	INIT_WORK(&priv->up, iwl4965_bg_up);
+	INIT_WORK(&priv->restart, iwl4965_bg_restart);
+	INIT_WORK(&priv->rx_replenish, iwl4965_bg_rx_replenish);
+	INIT_WORK(&priv->rf_kill, iwl4965_bg_rf_kill);
+	INIT_WORK(&priv->beacon_update, iwl4965_bg_beacon_update);
+	INIT_WORK(&priv->set_monitor, iwl4965_bg_set_monitor);
+	INIT_WORK(&priv->run_time_calib_work, iwl_bg_run_time_calib_work);
+	INIT_DELAYED_WORK(&priv->init_alive_start, iwl_bg_init_alive_start);
+	INIT_DELAYED_WORK(&priv->alive_start, iwl_bg_alive_start);
+
+	/* FIXME : remove when resolved PENDING */
+	INIT_WORK(&priv->scan_completed, iwl_bg_scan_completed);
+	iwl_setup_scan_deferred_work(priv);
+
+	if (priv->cfg->ops->lib->setup_deferred_work)
+		priv->cfg->ops->lib->setup_deferred_work(priv);
+
+	init_timer(&priv->statistics_periodic);
+	priv->statistics_periodic.data = (unsigned long)priv;
+	priv->statistics_periodic.function = iwl4965_bg_statistics_periodic;
+
+	tasklet_init(&priv->irq_tasklet, (void (*)(unsigned long))
+		     iwl4965_irq_tasklet, (unsigned long)priv);
+}
+
+static void iwl_cancel_deferred_work(struct iwl_priv *priv)
+{
+	if (priv->cfg->ops->lib->cancel_deferred_work)
+		priv->cfg->ops->lib->cancel_deferred_work(priv);
+
+	cancel_delayed_work_sync(&priv->init_alive_start);
+	cancel_delayed_work(&priv->scan_check);
+	cancel_delayed_work(&priv->alive_start);
+	cancel_work_sync(&priv->beacon_update);
+	del_timer_sync(&priv->statistics_periodic);
+}
+
+static struct attribute *iwl4965_sysfs_entries[] = {
+	&dev_attr_channels.attr,
+	&dev_attr_flags.attr,
+	&dev_attr_filter_flags.attr,
+#ifdef CONFIG_IWLAGN_SPECTRUM_MEASUREMENT
+	&dev_attr_measurement.attr,
+#endif
+	&dev_attr_power_level.attr,
+	&dev_attr_retry_rate.attr,
+	&dev_attr_statistics.attr,
+	&dev_attr_status.attr,
+	&dev_attr_temperature.attr,
+	&dev_attr_tx_power.attr,
+#ifdef CONFIG_IWLWIFI_DEBUG
+	&dev_attr_debug_level.attr,
+#endif
+	&dev_attr_version.attr,
+
+	NULL
+};
+
+static struct attribute_group iwl4965_attribute_group = {
+	.name = NULL,		/* put in device directory */
+	.attrs = iwl4965_sysfs_entries,
+};
+
+static struct ieee80211_ops iwl4965_hw_ops = {
+	.tx = iwl4965_mac_tx,
+	.start = iwl4965_mac_start,
+	.stop = iwl4965_mac_stop,
+	.add_interface = iwl4965_mac_add_interface,
+	.remove_interface = iwl4965_mac_remove_interface,
+	.config = iwl4965_mac_config,
+	.config_interface = iwl4965_mac_config_interface,
+	.configure_filter = iwl4965_configure_filter,
+	.set_key = iwl4965_mac_set_key,
+	.update_tkip_key = iwl4965_mac_update_tkip_key,
+	.get_stats = iwl4965_mac_get_stats,
+	.get_tx_stats = iwl4965_mac_get_tx_stats,
+	.conf_tx = iwl4965_mac_conf_tx,
+	.reset_tsf = iwl4965_mac_reset_tsf,
+	.bss_info_changed = iwl4965_bss_info_changed,
+	.ampdu_action = iwl4965_mac_ampdu_action,
+	.hw_scan = iwl4965_mac_hw_scan
+};
+
+static int iwl4965_pci_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
+{
+	int err = 0;
+	struct iwl_priv *priv;
+	struct ieee80211_hw *hw;
+	struct iwl_cfg *cfg = (struct iwl_cfg *)(ent->driver_data);
+	unsigned long flags;
+	DECLARE_MAC_BUF(mac);
+
+	/************************
+	 * 1. Allocating HW data
+	 ************************/
+
+	/* Disabling hardware scan means that mac80211 will perform scans
+	 * "the hard way", rather than using device's scan. */
+	if (cfg->mod_params->disable_hw_scan) {
+		if (cfg->mod_params->debug & IWL_DL_INFO)
+			dev_printk(KERN_DEBUG, &(pdev->dev),
+				   "Disabling hw_scan\n");
+		iwl4965_hw_ops.hw_scan = NULL;
+	}
+
+	hw = iwl_alloc_all(cfg, &iwl4965_hw_ops);
+	if (!hw) {
+		err = -ENOMEM;
+		goto out;
+	}
+	priv = hw->priv;
+	/* At this point both hw and priv are allocated. */
+
+	SET_IEEE80211_DEV(hw, &pdev->dev);
+
+	IWL_DEBUG_INFO("*** LOAD DRIVER ***\n");
+	priv->cfg = cfg;
+	priv->pci_dev = pdev;
+
+#ifdef CONFIG_IWLWIFI_DEBUG
+	priv->debug_level = priv->cfg->mod_params->debug;
+	atomic_set(&priv->restrict_refcnt, 0);
+#endif
+
+	/**************************
+	 * 2. Initializing PCI bus
+	 **************************/
+	if (pci_enable_device(pdev)) {
+		err = -ENODEV;
+		goto out_ieee80211_free_hw;
+	}
+
+	pci_set_master(pdev);
+
+	err = pci_set_dma_mask(pdev, DMA_64BIT_MASK);
+	if (!err)
+		err = pci_set_consistent_dma_mask(pdev, DMA_64BIT_MASK);
+	if (err) {
+		err = pci_set_dma_mask(pdev, DMA_32BIT_MASK);
+		if (!err)
+			err = pci_set_consistent_dma_mask(pdev, DMA_32BIT_MASK);
+		/* both attempts failed: */
+		if (err) {
+			printk(KERN_WARNING "%s: No suitable DMA available.\n",
+				DRV_NAME);
+			goto out_pci_disable_device;
+		}
+	}
+
+	err = pci_request_regions(pdev, DRV_NAME);
+	if (err)
+		goto out_pci_disable_device;
+
+	pci_set_drvdata(pdev, priv);
+
+	/* We disable the RETRY_TIMEOUT register (0x41) to keep
+	 * PCI Tx retries from interfering with C3 CPU state */
+	pci_write_config_byte(pdev, 0x41, 0x00);
+
+	/***********************
+	 * 3. Read REV register
+	 ***********************/
+	priv->hw_base = pci_iomap(pdev, 0, 0);
+	if (!priv->hw_base) {
+		err = -ENODEV;
+		goto out_pci_release_regions;
+	}
+
+	IWL_DEBUG_INFO("pci_resource_len = 0x%08llx\n",
+		(unsigned long long) pci_resource_len(pdev, 0));
+	IWL_DEBUG_INFO("pci_resource_base = %p\n", priv->hw_base);
+
+	iwl_hw_detect(priv);
+	printk(KERN_INFO DRV_NAME
+		": Detected Intel Wireless WiFi Link %s REV=0x%X\n",
+		priv->cfg->name, priv->hw_rev);
+
+	/* amp init */
+	err = priv->cfg->ops->lib->apm_ops.init(priv);
+	if (err < 0) {
+		IWL_DEBUG_INFO("Failed to init APMG\n");
+		goto out_iounmap;
+	}
+	/*****************
+	 * 4. Read EEPROM
+	 *****************/
+	/* Read the EEPROM */
+	err = iwl_eeprom_init(priv);
+	if (err) {
+		IWL_ERROR("Unable to init EEPROM\n");
+		goto out_iounmap;
+	}
+	err = iwl_eeprom_check_version(priv);
+	if (err)
+		goto out_iounmap;
+
+	/* extract MAC Address */
+	iwl_eeprom_get_mac(priv, priv->mac_addr);
+	IWL_DEBUG_INFO("MAC address: %s\n", print_mac(mac, priv->mac_addr));
+	SET_IEEE80211_PERM_ADDR(priv->hw, priv->mac_addr);
+
+	/************************
+	 * 5. Setup HW constants
+	 ************************/
+	if (iwl_set_hw_params(priv)) {
+		IWL_ERROR("failed to set hw parameters\n");
+		goto out_free_eeprom;
+	}
+
+	/*******************
+	 * 6. Setup priv
+	 *******************/
+
+	err = iwl_init_drv(priv);
+	if (err)
+		goto out_free_eeprom;
+	/* At this point both hw and priv are initialized. */
+
+	/**********************************
+	 * 7. Initialize module parameters
+	 **********************************/
+
+	/* Disable radio (SW RF KILL) via parameter when loading driver */
+	if (priv->cfg->mod_params->disable) {
+		set_bit(STATUS_RF_KILL_SW, &priv->status);
+		IWL_DEBUG_INFO("Radio disabled.\n");
+	}
+
+	/********************
+	 * 8. Setup services
+	 ********************/
+	spin_lock_irqsave(&priv->lock, flags);
+	iwl4965_disable_interrupts(priv);
+	spin_unlock_irqrestore(&priv->lock, flags);
+
+	err = sysfs_create_group(&pdev->dev.kobj, &iwl4965_attribute_group);
+	if (err) {
+		IWL_ERROR("failed to create sysfs device attributes\n");
+		goto out_uninit_drv;
+	}
+
+
+	iwl_setup_deferred_work(priv);
+	iwl_setup_rx_handlers(priv);
+
+	/********************
+	 * 9. Conclude
+	 ********************/
+	pci_save_state(pdev);
+	pci_disable_device(pdev);
+
+	/**********************************
+	 * 10. Setup and register mac80211
+	 **********************************/
+
+	err = iwl_setup_mac(priv);
+	if (err)
+		goto out_remove_sysfs;
+
+	err = iwl_dbgfs_register(priv, DRV_NAME);
+	if (err)
+		IWL_ERROR("failed to create debugfs files\n");
+
+	err = iwl_rfkill_init(priv);
+	if (err)
+		IWL_ERROR("Unable to initialize RFKILL system. "
+				  "Ignoring error: %d\n", err);
+	iwl_power_initialize(priv);
+	return 0;
+
+ out_remove_sysfs:
+	sysfs_remove_group(&pdev->dev.kobj, &iwl4965_attribute_group);
+ out_uninit_drv:
+	iwl_uninit_drv(priv);
+ out_free_eeprom:
+	iwl_eeprom_free(priv);
+ out_iounmap:
+	pci_iounmap(pdev, priv->hw_base);
+ out_pci_release_regions:
+	pci_release_regions(pdev);
+	pci_set_drvdata(pdev, NULL);
+ out_pci_disable_device:
+	pci_disable_device(pdev);
+ out_ieee80211_free_hw:
+	ieee80211_free_hw(priv->hw);
+ out:
+	return err;
+}
+
+static void __devexit iwl4965_pci_remove(struct pci_dev *pdev)
+{
+	struct iwl_priv *priv = pci_get_drvdata(pdev);
+	unsigned long flags;
+
+	if (!priv)
+		return;
+
+	IWL_DEBUG_INFO("*** UNLOAD DRIVER ***\n");
+
+	iwl_dbgfs_unregister(priv);
+	sysfs_remove_group(&pdev->dev.kobj, &iwl4965_attribute_group);
+
+	/* ieee80211_unregister_hw call wil cause iwl4965_mac_stop to
+	 * to be called and iwl4965_down since we are removing the device
+	 * we need to set STATUS_EXIT_PENDING bit.
+	 */
+	set_bit(STATUS_EXIT_PENDING, &priv->status);
+	if (priv->mac80211_registered) {
+		ieee80211_unregister_hw(priv->hw);
+		priv->mac80211_registered = 0;
+	} else {
+		iwl4965_down(priv);
+	}
+
+	/* make sure we flush any pending irq or
+	 * tasklet for the driver
+	 */
+	spin_lock_irqsave(&priv->lock, flags);
+	iwl4965_disable_interrupts(priv);
+	spin_unlock_irqrestore(&priv->lock, flags);
+
+	iwl_synchronize_irq(priv);
+
+	iwl_rfkill_unregister(priv);
+	iwl4965_dealloc_ucode_pci(priv);
+
+	if (priv->rxq.bd)
+		iwl_rx_queue_free(priv, &priv->rxq);
+	iwl_hw_txq_ctx_free(priv);
+
+	iwl_clear_stations_table(priv);
+	iwl_eeprom_free(priv);
+
+
+	/*netif_stop_queue(dev); */
+	flush_workqueue(priv->workqueue);
+
+	/* ieee80211_unregister_hw calls iwl4965_mac_stop, which flushes
+	 * priv->workqueue... so we can't take down the workqueue
+	 * until now... */
+	destroy_workqueue(priv->workqueue);
+	priv->workqueue = NULL;
+
+	pci_iounmap(pdev, priv->hw_base);
+	pci_release_regions(pdev);
+	pci_disable_device(pdev);
+	pci_set_drvdata(pdev, NULL);
+
+	iwl_uninit_drv(priv);
+
+	if (priv->ibss_beacon)
+		dev_kfree_skb(priv->ibss_beacon);
+
+	ieee80211_free_hw(priv->hw);
+}
+
+#ifdef CONFIG_PM
+
+static int iwl4965_pci_suspend(struct pci_dev *pdev, pm_message_t state)
+{
+	struct iwl_priv *priv = pci_get_drvdata(pdev);
+
+	if (priv->is_open) {
+		set_bit(STATUS_IN_SUSPEND, &priv->status);
+		iwl4965_mac_stop(priv->hw);
+		priv->is_open = 1;
+	}
+
+	pci_set_power_state(pdev, PCI_D3hot);
+
+	return 0;
+}
+
+static int iwl4965_pci_resume(struct pci_dev *pdev)
+{
+	struct iwl_priv *priv = pci_get_drvdata(pdev);
+
+	pci_set_power_state(pdev, PCI_D0);
+
+	if (priv->is_open)
+		iwl4965_mac_start(priv->hw);
+
+	clear_bit(STATUS_IN_SUSPEND, &priv->status);
+	return 0;
+}
+
+#endif /* CONFIG_PM */
+
+/*****************************************************************************
+ *
+ * driver and module entry point
+ *
+ *****************************************************************************/
+
+/* Hardware specific file defines the PCI IDs table for that hardware module */
+static struct pci_device_id iwl_hw_card_ids[] = {
+#ifdef CONFIG_IWL4965
+	{IWL_PCI_DEVICE(0x4229, PCI_ANY_ID, iwl4965_agn_cfg)},
+	{IWL_PCI_DEVICE(0x4230, PCI_ANY_ID, iwl4965_agn_cfg)},
+#endif /* CONFIG_IWL4965 */
+#ifdef CONFIG_IWL5000
+	{IWL_PCI_DEVICE(0x4232, 0x1205, iwl5100_bg_cfg)},
+	{IWL_PCI_DEVICE(0x4232, 0x1305, iwl5100_bg_cfg)},
+	{IWL_PCI_DEVICE(0x4232, 0x1206, iwl5100_abg_cfg)},
+	{IWL_PCI_DEVICE(0x4232, 0x1306, iwl5100_abg_cfg)},
+	{IWL_PCI_DEVICE(0x4232, 0x1326, iwl5100_abg_cfg)},
+	{IWL_PCI_DEVICE(0x4237, 0x1216, iwl5100_abg_cfg)},
+	{IWL_PCI_DEVICE(0x4232, PCI_ANY_ID, iwl5100_agn_cfg)},
+	{IWL_PCI_DEVICE(0x4235, PCI_ANY_ID, iwl5300_agn_cfg)},
+	{IWL_PCI_DEVICE(0x4236, PCI_ANY_ID, iwl5300_agn_cfg)},
+	{IWL_PCI_DEVICE(0x4237, PCI_ANY_ID, iwl5100_agn_cfg)},
+	{IWL_PCI_DEVICE(0x423A, PCI_ANY_ID, iwl5350_agn_cfg)},
+#endif /* CONFIG_IWL5000 */
+	{0}
+};
+MODULE_DEVICE_TABLE(pci, iwl_hw_card_ids);
+
+static struct pci_driver iwl_driver = {
+	.name = DRV_NAME,
+	.id_table = iwl_hw_card_ids,
+	.probe = iwl4965_pci_probe,
+	.remove = __devexit_p(iwl4965_pci_remove),
+#ifdef CONFIG_PM
+	.suspend = iwl4965_pci_suspend,
+	.resume = iwl4965_pci_resume,
+#endif
+};
+
+static int __init iwl4965_init(void)
+{
+
+	int ret;
+	printk(KERN_INFO DRV_NAME ": " DRV_DESCRIPTION ", " DRV_VERSION "\n");
+	printk(KERN_INFO DRV_NAME ": " DRV_COPYRIGHT "\n");
+
+	ret = iwlagn_rate_control_register();
+	if (ret) {
+		IWL_ERROR("Unable to register rate control algorithm: %d\n", ret);
+		return ret;
+	}
+
+	ret = pci_register_driver(&iwl_driver);
+	if (ret) {
+		IWL_ERROR("Unable to initialize PCI module\n");
+		goto error_register;
+	}
+
+	return ret;
+
+error_register:
+	iwlagn_rate_control_unregister();
+	return ret;
+}
+
+static void __exit iwl4965_exit(void)
+{
+	pci_unregister_driver(&iwl_driver);
+	iwlagn_rate_control_unregister();
+}
+
+module_exit(iwl4965_exit);
+module_init(iwl4965_init);
diff --git a/drivers/net/wireless/iwlwifi/iwl-commands.h b/drivers/net/wireless/iwlwifi/iwl-commands.h
index e9bb1de0ce3f..28b5b09996ed 100644
--- a/drivers/net/wireless/iwlwifi/iwl-commands.h
+++ b/drivers/net/wireless/iwlwifi/iwl-commands.h
@@ -666,8 +666,7 @@ struct iwl4965_rxon_assoc_cmd {
 	__le16 reserved;
 } __attribute__ ((packed));
 
-
-
+#define IWL_CONN_MAX_LISTEN_INTERVAL	10
 
 /*
  * REPLY_RXON_TIMING = 0x14 (command, has simple generic response)
@@ -1076,10 +1075,12 @@ struct iwl4965_rx_frame {
 } __attribute__ ((packed));
 
 /* Fixed (non-configurable) rx data from phy */
-#define RX_PHY_FLAGS_ANTENNAE_OFFSET		(4)
-#define RX_PHY_FLAGS_ANTENNAE_MASK		(0x70)
-#define IWL_AGC_DB_MASK 	(0x3f80)	/* MASK(7,13) */
-#define IWL_AGC_DB_POS		(7)
+
+#define IWL49_RX_RES_PHY_CNT 14
+#define IWL49_RX_PHY_FLAGS_ANTENNAE_OFFSET	(4)
+#define IWL49_RX_PHY_FLAGS_ANTENNAE_MASK	(0x70)
+#define IWL49_AGC_DB_MASK			(0x3f80)	/* MASK(7,13) */
+#define IWL49_AGC_DB_POS			(7)
 struct iwl4965_rx_non_cfg_phy {
 	__le16 ant_selection;	/* ant A bit 4, ant B bit 5, ant C bit 6 */
 	__le16 agc_info;	/* agc code 0:6, agc dB 7:13, reserved 14:15 */
@@ -1087,12 +1088,30 @@ struct iwl4965_rx_non_cfg_phy {
 	u8 pad[0];
 } __attribute__ ((packed));
 
+
+#define IWL50_RX_RES_PHY_CNT 8
+#define IWL50_RX_RES_AGC_IDX     1
+#define IWL50_RX_RES_RSSI_AB_IDX 2
+#define IWL50_RX_RES_RSSI_C_IDX  3
+#define IWL50_OFDM_AGC_MSK 0xfe00
+#define IWL50_OFDM_AGC_BIT_POS 9
+#define IWL50_OFDM_RSSI_A_MSK 0x00ff
+#define IWL50_OFDM_RSSI_A_BIT_POS 0
+#define IWL50_OFDM_RSSI_B_MSK 0xff0000
+#define IWL50_OFDM_RSSI_B_BIT_POS 16
+#define IWL50_OFDM_RSSI_C_MSK 0x00ff
+#define IWL50_OFDM_RSSI_C_BIT_POS 0
+
+struct iwl5000_non_cfg_phy {
+	__le32 non_cfg_phy[IWL50_RX_RES_PHY_CNT];  /* upto 8 phy entries */
+} __attribute__ ((packed));
+
+
 /*
  * REPLY_RX = 0xc3 (response only, not a command)
  * Used only for legacy (non 11n) frames.
  */
-#define RX_RES_PHY_CNT 14
-struct iwl4965_rx_phy_res {
+struct iwl_rx_phy_res {
 	u8 non_cfg_phy_cnt;     /* non configurable DSP phy data byte count */
 	u8 cfg_phy_cnt;		/* configurable DSP phy data byte count */
 	u8 stat_id;		/* configurable DSP phy data set ID */
@@ -1101,8 +1120,7 @@ struct iwl4965_rx_phy_res {
 	__le32 beacon_time_stamp; /* beacon at on-air rise */
 	__le16 phy_flags;	/* general phy flags: band, modulation, ... */
 	__le16 channel;		/* channel number */
-	__le16 non_cfg_phy[RX_RES_PHY_CNT];	/* upto 14 phy entries */
-	__le32 reserved2;
+	u8 non_cfg_phy_buf[32]; /* for various implementations of non_cfg_phy */
 	__le32 rate_n_flags;	/* RATE_MCS_* */
 	__le16 byte_count;	/* frame's byte-count */
 	__le16 reserved3;
@@ -1993,7 +2011,7 @@ struct iwl4965_spectrum_notification {
  *****************************************************************************/
 
 /**
- * struct iwl4965_powertable_cmd - Power Table Command
+ * struct iwl_powertable_cmd - Power Table Command
  * @flags: See below:
  *
  * POWER_TABLE_CMD = 0x77 (command, has simple generic response)
@@ -2027,7 +2045,7 @@ struct iwl4965_spectrum_notification {
 #define IWL_POWER_PCI_PM_MSK			__constant_cpu_to_le16(1 << 3)
 #define IWL_POWER_FAST_PD			__constant_cpu_to_le16(1 << 4)
 
-struct iwl4965_powertable_cmd {
+struct iwl_powertable_cmd {
 	__le16 flags;
 	u8 keep_alive_seconds;
 	u8 debug_flags;
@@ -2324,7 +2342,7 @@ struct iwl4965_beacon_notif {
 /*
  * REPLY_TX_BEACON = 0x91 (command, has simple generic response)
  */
-struct iwl4965_tx_beacon_cmd {
+struct iwl_tx_beacon_cmd {
 	struct iwl_tx_cmd tx;
 	__le16 tim_idx;
 	u8 tim_size;
diff --git a/drivers/net/wireless/iwlwifi/iwl-core.c b/drivers/net/wireless/iwlwifi/iwl-core.c
index a44188bf4459..80f2f84defa8 100644
--- a/drivers/net/wireless/iwlwifi/iwl-core.c
+++ b/drivers/net/wireless/iwlwifi/iwl-core.c
@@ -28,7 +28,6 @@
 
 #include <linux/kernel.h>
 #include <linux/module.h>
-#include <linux/version.h>
 #include <net/mac80211.h>
 
 struct iwl_priv; /* FIXME: remove */
@@ -383,8 +382,8 @@ void iwl_reset_qos(struct iwl_priv *priv)
 }
 EXPORT_SYMBOL(iwl_reset_qos);
 
-#define MAX_BIT_RATE_40_MHZ 0x96; /* 150 Mbps */
-#define MAX_BIT_RATE_20_MHZ 0x48; /* 72 Mbps */
+#define MAX_BIT_RATE_40_MHZ 0x96 /* 150 Mbps */
+#define MAX_BIT_RATE_20_MHZ 0x48 /* 72 Mbps */
 static void iwlcore_init_ht_hw_capab(const struct iwl_priv *priv,
 			      struct ieee80211_ht_info *ht_info,
 			      enum ieee80211_band band)
@@ -593,12 +592,11 @@ static void iwlcore_free_geos(struct iwl_priv *priv)
 	clear_bit(STATUS_GEO_CONFIGURED, &priv->status);
 }
 
-static u8 is_single_rx_stream(struct iwl_priv *priv)
+static bool is_single_rx_stream(struct iwl_priv *priv)
 {
 	return !priv->current_ht_config.is_ht ||
 	       ((priv->current_ht_config.supp_mcs_set[1] == 0) &&
-		(priv->current_ht_config.supp_mcs_set[2] == 0)) ||
-	       priv->ps_mode == IWL_MIMO_PS_STATIC;
+		(priv->current_ht_config.supp_mcs_set[2] == 0));
 }
 
 static u8 iwl_is_channel_extension(struct iwl_priv *priv,
@@ -705,33 +703,39 @@ EXPORT_SYMBOL(iwl_set_rxon_ht);
  * MIMO (dual stream) requires at least 2, but works better with 3.
  * This does not determine *which* chains to use, just how many.
  */
-static int iwlcore_get_rx_chain_counter(struct iwl_priv *priv,
-					u8 *idle_state, u8 *rx_state)
+static int iwl_get_active_rx_chain_count(struct iwl_priv *priv)
 {
-	u8 is_single = is_single_rx_stream(priv);
-	u8 is_cam = test_bit(STATUS_POWER_PMI, &priv->status) ? 0 : 1;
+	bool is_single = is_single_rx_stream(priv);
+	bool is_cam = !test_bit(STATUS_POWER_PMI, &priv->status);
 
 	/* # of Rx chains to use when expecting MIMO. */
 	if (is_single || (!is_cam && (priv->ps_mode == IWL_MIMO_PS_STATIC)))
-		*rx_state = 2;
+		return 2;
 	else
-		*rx_state = 3;
+		return 3;
+}
 
+static int iwl_get_idle_rx_chain_count(struct iwl_priv *priv, int active_cnt)
+{
+	int idle_cnt;
+	bool is_cam = !test_bit(STATUS_POWER_PMI, &priv->status);
 	/* # Rx chains when idling and maybe trying to save power */
 	switch (priv->ps_mode) {
 	case IWL_MIMO_PS_STATIC:
 	case IWL_MIMO_PS_DYNAMIC:
-		*idle_state = (is_cam) ? 2 : 1;
+		idle_cnt = (is_cam) ? 2 : 1;
 		break;
 	case IWL_MIMO_PS_NONE:
-		*idle_state = (is_cam) ? *rx_state : 1;
+		idle_cnt = (is_cam) ? active_cnt : 1;
 		break;
+	case IWL_MIMO_PS_INVALID:
 	default:
-		*idle_state = 1;
+		IWL_ERROR("invalide mimo ps mode %d\n", priv->ps_mode);
+		WARN_ON(1);
+		idle_cnt = -1;
 		break;
 	}
-
-	return 0;
+	return idle_cnt;
 }
 
 /**
@@ -742,34 +746,44 @@ static int iwlcore_get_rx_chain_counter(struct iwl_priv *priv,
  */
 void iwl_set_rxon_chain(struct iwl_priv *priv)
 {
-	u8 is_single = is_single_rx_stream(priv);
-	u8 idle_state, rx_state;
-
-	priv->staging_rxon.rx_chain = 0;
-	rx_state = idle_state = 3;
+	bool is_single = is_single_rx_stream(priv);
+	bool is_cam = !test_bit(STATUS_POWER_PMI, &priv->status);
+	u8 idle_rx_cnt, active_rx_cnt;
+	u16 rx_chain;
 
 	/* Tell uCode which antennas are actually connected.
 	 * Before first association, we assume all antennas are connected.
 	 * Just after first association, iwl_chain_noise_calibration()
 	 *    checks which antennas actually *are* connected. */
-	priv->staging_rxon.rx_chain |=
-		    cpu_to_le16(priv->hw_params.valid_rx_ant <<
-						 RXON_RX_CHAIN_VALID_POS);
+	rx_chain = priv->hw_params.valid_rx_ant << RXON_RX_CHAIN_VALID_POS;
 
 	/* How many receivers should we use? */
-	iwlcore_get_rx_chain_counter(priv, &idle_state, &rx_state);
-	priv->staging_rxon.rx_chain |=
-		cpu_to_le16(rx_state << RXON_RX_CHAIN_MIMO_CNT_POS);
-	priv->staging_rxon.rx_chain |=
-		cpu_to_le16(idle_state << RXON_RX_CHAIN_CNT_POS);
-
-	if (!is_single && (rx_state >= 2) &&
-	    !test_bit(STATUS_POWER_PMI, &priv->status))
+	active_rx_cnt = iwl_get_active_rx_chain_count(priv);
+	idle_rx_cnt = iwl_get_idle_rx_chain_count(priv, active_rx_cnt);
+
+	/* correct rx chain count accoridng hw settings */
+	if (priv->hw_params.rx_chains_num < active_rx_cnt)
+		active_rx_cnt = priv->hw_params.rx_chains_num;
+
+	if (priv->hw_params.rx_chains_num < idle_rx_cnt)
+		idle_rx_cnt = priv->hw_params.rx_chains_num;
+
+	rx_chain |= active_rx_cnt << RXON_RX_CHAIN_MIMO_CNT_POS;
+	rx_chain |= idle_rx_cnt  << RXON_RX_CHAIN_CNT_POS;
+
+	priv->staging_rxon.rx_chain = cpu_to_le16(rx_chain);
+
+	if (!is_single && (active_rx_cnt >= 2) && is_cam)
 		priv->staging_rxon.rx_chain |= RXON_RX_CHAIN_MIMO_FORCE_MSK;
 	else
 		priv->staging_rxon.rx_chain &= ~RXON_RX_CHAIN_MIMO_FORCE_MSK;
 
-	IWL_DEBUG_ASSOC("rx chain %X\n", priv->staging_rxon.rx_chain);
+	IWL_DEBUG_ASSOC("rx_chain=0x%Xi active=%d idle=%d\n",
+			priv->staging_rxon.rx_chain,
+			active_rx_cnt, idle_rx_cnt);
+
+	WARN_ON(active_rx_cnt == 0 || idle_rx_cnt == 0 ||
+		active_rx_cnt < idle_rx_cnt);
 }
 EXPORT_SYMBOL(iwl_set_rxon_chain);
 
@@ -815,11 +829,10 @@ int iwl_setup_mac(struct iwl_priv *priv)
 {
 	int ret;
 	struct ieee80211_hw *hw = priv->hw;
-	hw->rate_control_algorithm = "iwl-4965-rs";
+	hw->rate_control_algorithm = "iwl-agn-rs";
 
 	/* Tell mac80211 our characteristics */
-	hw->flags = IEEE80211_HW_HOST_GEN_BEACON_TEMPLATE |
-		    IEEE80211_HW_SIGNAL_DBM |
+	hw->flags = IEEE80211_HW_SIGNAL_DBM |
 		    IEEE80211_HW_NOISE_DBM;
 	/* Default value; 4 EDCA QOS priorities */
 	hw->queues = 4;
@@ -828,6 +841,7 @@ int iwl_setup_mac(struct iwl_priv *priv)
 		hw->ampdu_queues = priv->cfg->mod_params->num_of_ampdu_queues;
 
 	hw->conf.beacon_int = 100;
+	hw->max_listen_interval = IWL_CONN_MAX_LISTEN_INTERVAL;
 
 	if (priv->bands[IEEE80211_BAND_2GHZ].n_channels)
 		priv->hw->wiphy->bands[IEEE80211_BAND_2GHZ] =
diff --git a/drivers/net/wireless/iwlwifi/iwl-core.h b/drivers/net/wireless/iwlwifi/iwl-core.h
index db66114f1e56..64f139e97444 100644
--- a/drivers/net/wireless/iwlwifi/iwl-core.h
+++ b/drivers/net/wireless/iwlwifi/iwl-core.h
@@ -95,6 +95,8 @@ struct iwl_hcmd_utils_ops {
 	void (*chain_noise_reset)(struct iwl_priv *priv);
 	void (*rts_tx_cmd_flag)(struct ieee80211_tx_info *info,
 			__le32 *tx_flags);
+	int  (*calc_rssi)(struct iwl_priv *priv,
+			  struct iwl_rx_phy_res *rx_resp);
 };
 
 struct iwl_lib_ops {
@@ -139,7 +141,6 @@ struct iwl_lib_ops {
 		int (*set_pwr_src)(struct iwl_priv *priv, enum iwl_pwr_src src);
 	} apm_ops;
 	/* power */
-	int (*set_power)(struct iwl_priv *priv, void *cmd);
 	int (*send_tx_power) (struct iwl_priv *priv);
 	void (*update_chain_flags)(struct iwl_priv *priv);
 	void (*temperature) (struct iwl_priv *priv);
diff --git a/drivers/net/wireless/iwlwifi/iwl-csr.h b/drivers/net/wireless/iwlwifi/iwl-csr.h
index 545ed692d889..52629fbd835a 100644
--- a/drivers/net/wireless/iwlwifi/iwl-csr.h
+++ b/drivers/net/wireless/iwlwifi/iwl-csr.h
@@ -104,6 +104,7 @@
  *  3-2:  0 = A, 1 = B, 2 = C, 3 = D step
  */
 #define CSR_HW_REV_WA_REG	(CSR_BASE+0x22C)
+#define CSR_DBG_HPET_MEM_REG	(CSR_BASE+0x240)
 
 /* Bits for CSR_HW_IF_CONFIG_REG */
 #define CSR49_HW_IF_CONFIG_REG_BIT_4965_R	(0x00000010)
@@ -118,7 +119,12 @@
 #define CSR39_HW_IF_CONFIG_REG_BITS_SILICON_TYPE_A    (0x00000000)
 #define CSR39_HW_IF_CONFIG_REG_BITS_SILICON_TYPE_B    (0x00001000)
 
-#define CSR_HW_IF_CONFIG_REG_BIT_EEPROM_OWN_SEM     (0x00200000)
+#define CSR_HW_IF_CONFIG_REG_BIT_HAP_WAKE_L1A		(0x00080000)
+#define CSR_HW_IF_CONFIG_REG_BIT_EEPROM_OWN_SEM		(0x00200000)
+#define CSR_HW_IF_CONFIG_REG_BIT_PCI_OWN_SEM		(0x00400000)
+#define CSR_HW_IF_CONFIG_REG_BIT_ME_OWN			(0x02000000)
+#define CSR_HW_IF_CONFIG_REG_BIT_WAKE_ME		(0x08000000)
+
 
 /* interrupt flags in INTA, set by uCode or hardware (e.g. dma),
  * acknowledged (reset) by host writing "1" to flagged bits. */
@@ -236,6 +242,8 @@
 #define CSR39_ANA_PLL_CFG_VAL        (0x01000000)
 #define CSR50_ANA_PLL_CFG_VAL        (0x00880300)
 
+/* HPET MEM debug */
+#define CSR_DBG_HPET_MEM_REG_VAL	(0xFFFF0000)
 /*=== HBUS (Host-side Bus) ===*/
 #define HBUS_BASE	(0x400)
 /*
diff --git a/drivers/net/wireless/iwlwifi/iwl-debug.h b/drivers/net/wireless/iwlwifi/iwl-debug.h
index 58384805a494..d2daa174df22 100644
--- a/drivers/net/wireless/iwlwifi/iwl-debug.h
+++ b/drivers/net/wireless/iwlwifi/iwl-debug.h
@@ -33,12 +33,12 @@
 #define IWL_DEBUG(level, fmt, args...) \
 do { if (priv->debug_level & (level)) \
   dev_printk(KERN_ERR, &(priv->hw->wiphy->dev), "%c %s " fmt, \
-	 in_interrupt() ? 'I' : 'U', __FUNCTION__ , ## args); } while (0)
+	 in_interrupt() ? 'I' : 'U', __func__ , ## args); } while (0)
 
 #define IWL_DEBUG_LIMIT(level, fmt, args...) \
 do { if ((priv->debug_level & (level)) && net_ratelimit()) \
   dev_printk(KERN_ERR, &(priv->hw->wiphy->dev), "%c %s " fmt, \
-	 in_interrupt() ? 'I' : 'U', __FUNCTION__ , ## args); } while (0)
+	 in_interrupt() ? 'I' : 'U', __func__ , ## args); } while (0)
 
 #ifdef CONFIG_IWLWIFI_DEBUGFS
 struct iwl_debugfs {
@@ -68,12 +68,8 @@ void iwl_dbgfs_unregister(struct iwl_priv *priv);
 #endif
 
 #else
-static inline void IWL_DEBUG(int level, const char *fmt, ...)
-{
-}
-static inline void IWL_DEBUG_LIMIT(int level, const char *fmt, ...)
-{
-}
+#define IWL_DEBUG(level, fmt, args...)
+#define IWL_DEBUG_LIMIT(level, fmt, args...)
 #endif				/* CONFIG_IWLWIFI_DEBUG */
 
 
@@ -118,7 +114,7 @@ static inline void iwl_dbgfs_unregister(struct iwl_priv *priv)
 #define IWL_DL_MAC80211      (1 << 1)
 #define IWL_DL_HOST_COMMAND  (1 << 2)
 #define IWL_DL_STATE         (1 << 3)
-
+#define IWL_DL_MACDUMP		(1 << 4)
 #define IWL_DL_RADIO         (1 << 7)
 #define IWL_DL_POWER         (1 << 8)
 #define IWL_DL_TEMP          (1 << 9)
@@ -158,6 +154,7 @@ static inline void iwl_dbgfs_unregister(struct iwl_priv *priv)
 #define IWL_DEBUG_INFO(f, a...)    IWL_DEBUG(IWL_DL_INFO, f, ## a)
 
 #define IWL_DEBUG_MAC80211(f, a...)     IWL_DEBUG(IWL_DL_MAC80211, f, ## a)
+#define IWL_DEBUG_MACDUMP(f, a...)     IWL_DEBUG(IWL_DL_MACDUMP, f, ## a)
 #define IWL_DEBUG_TEMP(f, a...)   IWL_DEBUG(IWL_DL_TEMP, f, ## a)
 #define IWL_DEBUG_SCAN(f, a...)   IWL_DEBUG(IWL_DL_SCAN, f, ## a)
 #define IWL_DEBUG_RX(f, a...)     IWL_DEBUG(IWL_DL_RX, f, ## a)
diff --git a/drivers/net/wireless/iwlwifi/iwl-debugfs.c b/drivers/net/wireless/iwlwifi/iwl-debugfs.c
index ed948dc59b3d..20db0eb636a8 100644
--- a/drivers/net/wireless/iwlwifi/iwl-debugfs.c
+++ b/drivers/net/wireless/iwlwifi/iwl-debugfs.c
@@ -231,7 +231,7 @@ static ssize_t iwl_dbgfs_stations_read(struct file *file, char __user *user_buf,
 	DECLARE_MAC_BUF(mac);
 
 	buf = kmalloc(bufsz, GFP_KERNEL);
-	if(!buf)
+	if (!buf)
 		return -ENOMEM;
 
 	pos += scnprintf(buf + pos, bufsz - pos, "num of stations: %d\n\n",
@@ -364,16 +364,19 @@ int iwl_dbgfs_register(struct iwl_priv *priv, const char *name)
 {
 	struct iwl_debugfs *dbgfs;
 	struct dentry *phyd = priv->hw->wiphy->debugfsdir;
+	int ret = 0;
 
 	dbgfs = kzalloc(sizeof(struct iwl_debugfs), GFP_KERNEL);
 	if (!dbgfs) {
+		ret = -ENOMEM;
 		goto err;
 	}
 
 	priv->dbgfs = dbgfs;
 	dbgfs->name = name;
 	dbgfs->dir_drv = debugfs_create_dir(name, phyd);
-	if (!dbgfs->dir_drv || IS_ERR(dbgfs->dir_drv)){
+	if (!dbgfs->dir_drv || IS_ERR(dbgfs->dir_drv)) {
+		ret = -ENOENT;
 		goto err;
 	}
 
@@ -394,7 +397,7 @@ int iwl_dbgfs_register(struct iwl_priv *priv, const char *name)
 err:
 	IWL_ERROR("Can't open the debugfs directory\n");
 	iwl_dbgfs_unregister(priv);
-	return -ENOENT;
+	return ret;
 }
 EXPORT_SYMBOL(iwl_dbgfs_register);
 
@@ -404,7 +407,7 @@ EXPORT_SYMBOL(iwl_dbgfs_register);
  */
 void iwl_dbgfs_unregister(struct iwl_priv *priv)
 {
-	if (!(priv->dbgfs))
+	if (!priv->dbgfs)
 		return;
 
 	DEBUGFS_REMOVE(priv->dbgfs->dbgfs_data_files.file_eeprom);
diff --git a/drivers/net/wireless/iwlwifi/iwl-dev.h b/drivers/net/wireless/iwlwifi/iwl-dev.h
index 4d789e353e3a..cdfb343c7ec6 100644
--- a/drivers/net/wireless/iwlwifi/iwl-dev.h
+++ b/drivers/net/wireless/iwlwifi/iwl-dev.h
@@ -36,7 +36,7 @@
 #include <linux/kernel.h>
 #include <net/ieee80211_radiotap.h>
 
-#define DRV_NAME        "iwl4965"
+#define DRV_NAME        "iwlagn"
 #include "iwl-rfkill.h"
 #include "iwl-eeprom.h"
 #include "iwl-4965-hw.h"
@@ -45,6 +45,7 @@
 #include "iwl-debug.h"
 #include "iwl-led.h"
 #include "iwl-power.h"
+#include "iwl-agn-rs.h"
 
 /* configuration for the iwl4965 */
 extern struct iwl_cfg iwl4965_agn_cfg;
@@ -134,8 +135,7 @@ struct iwl_tx_info {
 struct iwl_tx_queue {
 	struct iwl_queue q;
 	struct iwl_tfd_frame *bd;
-	struct iwl_cmd *cmd;
-	dma_addr_t dma_addr_cmd;
+	struct iwl_cmd *cmd[TFD_TX_CMD_SLOTS];
 	struct iwl_tx_info *txb;
 	int need_update;
 	int sched_retry;
@@ -191,7 +191,6 @@ struct iwl4965_clip_group {
 	const s8 clip_powers[IWL_MAX_RATES];
 };
 
-#include "iwl-4965-rs.h"
 
 #define IWL_TX_FIFO_AC0	0
 #define IWL_TX_FIFO_AC1	1
@@ -219,7 +218,7 @@ enum iwl_pwr_src {
 struct iwl_frame {
 	union {
 		struct ieee80211_hdr frame;
-		struct iwl4965_tx_beacon_cmd beacon;
+		struct iwl_tx_beacon_cmd beacon;
 		u8 raw[IEEE80211_FRAME_LEN];
 		u8 cmd[360];
 	} u;
@@ -283,10 +282,9 @@ struct iwl_cmd {
 		u32 val32;
 		struct iwl4965_bt_cmd bt;
 		struct iwl4965_rxon_time_cmd rxon_time;
-		struct iwl4965_powertable_cmd powertable;
+		struct iwl_powertable_cmd powertable;
 		struct iwl_qosparam_cmd qosparam;
 		struct iwl_tx_cmd tx;
-		struct iwl4965_tx_beacon_cmd tx_beacon;
 		struct iwl4965_rxon_assoc_cmd rxon_assoc;
 		struct iwl_rem_sta_cmd rm_sta;
 		u8 *indirect;
@@ -414,7 +412,6 @@ struct iwl_ht_info {
 	/* self configuration data */
 	u8 is_ht;
 	u8 supported_chan_width;
-	u16 tx_mimo_ps_mode;
 	u8 is_green_field;
 	u8 sgf;			/* HT_SHORT_GI_* short guard interval */
 	u8 max_amsdu_size;
@@ -590,6 +587,7 @@ extern unsigned int iwl4965_fill_beacon_frame(struct iwl_priv *priv,
 					const u8 *dest, int left);
 extern void iwl4965_update_chain_flags(struct iwl_priv *priv);
 int iwl4965_set_pwr_src(struct iwl_priv *priv, enum iwl_pwr_src src);
+extern int iwl4965_set_power(struct iwl_priv *priv, void *cmd);
 
 extern const u8 iwl_bcast_addr[ETH_ALEN];
 
@@ -642,10 +640,6 @@ struct iwl_priv;
  * Forward declare iwl-4965.c functions for iwl-base.c
  */
 extern void iwl4965_rf_kill_ct_config(struct iwl_priv *priv);
-
-int iwl4965_mac_ampdu_action(struct ieee80211_hw *hw,
-				    enum ieee80211_ampdu_mlme_action action,
-				    const u8 *addr, u16 tid, u16 *ssn);
 int iwl4965_check_empty_hw_queue(struct iwl_priv *priv, int sta_id,
 					u8 tid, int txq_id);
 
@@ -812,14 +806,11 @@ struct iwl_chain_noise_data {
 #define EEPROM_SEM_RETRY_LIMIT 1000	/* number of attempts (not time) */
 
 
-#ifdef CONFIG_IWL4965_SPECTRUM_MEASUREMENT
-
 enum {
 	MEASUREMENT_READY = (1 << 0),
 	MEASUREMENT_ACTIVE = (1 << 1),
 };
 
-#endif
 
 #define IWL_MAX_NUM_QUEUES	20 /* FIXME: do dynamic allocation */
 
@@ -844,7 +835,7 @@ struct iwl_priv {
 
 	struct ieee80211_supported_band bands[IEEE80211_NUM_BANDS];
 
-#ifdef CONFIG_IWL4965_SPECTRUM_MEASUREMENT
+#ifdef CONFIG_IWLAGN_SPECTRUM_MEASUREMENT
 	/* spectrum measurement report caching */
 	struct iwl4965_spectrum_notification measure_report;
 	u8 measurement_status;
diff --git a/drivers/net/wireless/iwlwifi/iwl-eeprom.c b/drivers/net/wireless/iwlwifi/iwl-eeprom.c
index 4a08a1b50979..37155755efc5 100644
--- a/drivers/net/wireless/iwlwifi/iwl-eeprom.c
+++ b/drivers/net/wireless/iwlwifi/iwl-eeprom.c
@@ -63,7 +63,6 @@
 
 #include <linux/kernel.h>
 #include <linux/module.h>
-#include <linux/version.h>
 #include <linux/init.h>
 
 #include <net/mac80211.h>
@@ -146,7 +145,7 @@ int iwlcore_eeprom_verify_signature(struct iwl_priv *priv)
 {
 	u32 gp = iwl_read32(priv, CSR_EEPROM_GP);
 	if ((gp & CSR_EEPROM_GP_VALID_MSK) == CSR_EEPROM_GP_BAD_SIGNATURE) {
-		IWL_ERROR("EEPROM not found, EEPROM_GP=0x%08x", gp);
+		IWL_ERROR("EEPROM not found, EEPROM_GP=0x%08x\n", gp);
 		return -ENOENT;
 	}
 	return 0;
@@ -227,7 +226,7 @@ int iwl_eeprom_init(struct iwl_priv *priv)
 
 	ret = priv->cfg->ops->lib->eeprom_ops.verify_signature(priv);
 	if (ret < 0) {
-		IWL_ERROR("EEPROM not found, EEPROM_GP=0x%08x", gp);
+		IWL_ERROR("EEPROM not found, EEPROM_GP=0x%08x\n", gp);
 		ret = -ENOENT;
 		goto err;
 	}
@@ -254,7 +253,7 @@ int iwl_eeprom_init(struct iwl_priv *priv)
 		}
 
 		if (!(r & CSR_EEPROM_REG_READ_VALID_MSK)) {
-			IWL_ERROR("Time out reading EEPROM[%d]", addr);
+			IWL_ERROR("Time out reading EEPROM[%d]\n", addr);
 			ret = -ETIMEDOUT;
 			goto done;
 		}
@@ -273,8 +272,7 @@ EXPORT_SYMBOL(iwl_eeprom_init);
 
 void iwl_eeprom_free(struct iwl_priv *priv)
 {
-	if(priv->eeprom)
-		kfree(priv->eeprom);
+	kfree(priv->eeprom);
 	priv->eeprom = NULL;
 }
 EXPORT_SYMBOL(iwl_eeprom_free);
diff --git a/drivers/net/wireless/iwlwifi/iwl-fh.h b/drivers/net/wireless/iwlwifi/iwl-fh.h
index 944642450d3d..cd11c0ca2991 100644
--- a/drivers/net/wireless/iwlwifi/iwl-fh.h
+++ b/drivers/net/wireless/iwlwifi/iwl-fh.h
@@ -287,6 +287,7 @@
 
 #define FH_RSSR_CHNL0_RX_STATUS_CHNL_IDLE	(0x01000000)
 
+#define FH_MEM_TFDIB_REG1_ADDR_BITSHIFT	28
 
 /**
  * Transmit DMA Channel Control/Status Registers (TCSR)
diff --git a/drivers/net/wireless/iwlwifi/iwl-hcmd.c b/drivers/net/wireless/iwlwifi/iwl-hcmd.c
index 8fa991b7202a..2eb03eea1908 100644
--- a/drivers/net/wireless/iwlwifi/iwl-hcmd.c
+++ b/drivers/net/wireless/iwlwifi/iwl-hcmd.c
@@ -28,7 +28,6 @@
 
 #include <linux/kernel.h>
 #include <linux/module.h>
-#include <linux/version.h>
 #include <net/mac80211.h>
 
 #include "iwl-dev.h" /* FIXME: remove */
@@ -228,7 +227,7 @@ cancel:
 		 * TX cmd queue. Otherwise in case the cmd comes
 		 * in later, it will possibly set an invalid
 		 * address (cmd->meta.source). */
-		qcmd = &priv->txq[IWL_CMD_QUEUE_NUM].cmd[cmd_idx];
+		qcmd = priv->txq[IWL_CMD_QUEUE_NUM].cmd[cmd_idx];
 		qcmd->meta.flags &= ~CMD_WANT_SKB;
 	}
 fail:
diff --git a/drivers/net/wireless/iwlwifi/iwl-led.c b/drivers/net/wireless/iwlwifi/iwl-led.c
index 899d7a2567a8..4eee1b163cd2 100644
--- a/drivers/net/wireless/iwlwifi/iwl-led.c
+++ b/drivers/net/wireless/iwlwifi/iwl-led.c
@@ -27,7 +27,6 @@
 
 #include <linux/kernel.h>
 #include <linux/module.h>
-#include <linux/version.h>
 #include <linux/init.h>
 #include <linux/pci.h>
 #include <linux/dma-mapping.h>
@@ -161,12 +160,32 @@ int iwl4965_led_off(struct iwl_priv *priv, int led_id)
 /* Set led register off */
 static int iwl4965_led_off_reg(struct iwl_priv *priv, int led_id)
 {
-	IWL_DEBUG_LED("radio off\n");
+	IWL_DEBUG_LED("LED Reg off\n");
 	iwl_write32(priv, CSR_LED_REG, CSR_LED_REG_TRUN_OFF);
 	return 0;
 }
 
 /*
+ * Set led register in case of disassociation according to rfkill state
+ */
+static int iwl_led_associate(struct iwl_priv *priv, int led_id)
+{
+	IWL_DEBUG_LED("Associated\n");
+	priv->allow_blinking = 1;
+	return iwl4965_led_on_reg(priv, led_id);
+}
+static int iwl_led_disassociate(struct iwl_priv *priv, int led_id)
+{
+	priv->allow_blinking = 0;
+	if (iwl_is_rfkill(priv))
+		iwl4965_led_off_reg(priv, led_id);
+	else
+		iwl4965_led_on_reg(priv, led_id);
+
+	return 0;
+}
+
+/*
  * brightness call back function for Tx/Rx LED
  */
 static int iwl_led_associated(struct iwl_priv *priv, int led_id)
@@ -199,16 +218,10 @@ static void iwl_led_brightness_set(struct led_classdev *led_cdev,
 			led_type_str[led->type], brightness);
 	switch (brightness) {
 	case LED_FULL:
-		if (led->type == IWL_LED_TRG_ASSOC)
-			priv->allow_blinking = 1;
-
 		if (led->led_on)
 			led->led_on(priv, IWL_LED_LINK);
 		break;
 	case LED_OFF:
-		if (led->type == IWL_LED_TRG_ASSOC)
-			priv->allow_blinking = 0;
-
 		if (led->led_off)
 			led->led_off(priv, IWL_LED_LINK);
 		break;
@@ -228,12 +241,12 @@ static void iwl_led_brightness_set(struct led_classdev *led_cdev,
  */
 static int iwl_leds_register_led(struct iwl_priv *priv, struct iwl_led *led,
 				   enum led_type type, u8 set_led,
-				   const char *name, char *trigger)
+				   char *trigger)
 {
 	struct device *device = wiphy_dev(priv->hw->wiphy);
 	int ret;
 
-	led->led_dev.name = name;
+	led->led_dev.name = led->name;
 	led->led_dev.brightness_set = iwl_led_brightness_set;
 	led->led_dev.default_trigger = trigger;
 
@@ -268,7 +281,9 @@ static int iwl_get_blink_rate(struct iwl_priv *priv)
 	if (tpt < 0) /* wrapparound */
 		tpt = -tpt;
 
-	IWL_DEBUG_LED("tpt %lld current_tpt %lld\n", tpt, current_tpt);
+	IWL_DEBUG_LED("tpt %lld current_tpt %llu\n",
+		(long long)tpt,
+		(unsigned long long)current_tpt);
 	priv->led_tpt = current_tpt;
 
 	if (!priv->allow_blinking)
@@ -282,12 +297,6 @@ static int iwl_get_blink_rate(struct iwl_priv *priv)
 	return i;
 }
 
-static inline int is_rf_kill(struct iwl_priv *priv)
-{
-	return test_bit(STATUS_RF_KILL_HW, &priv->status) ||
-		test_bit(STATUS_RF_KILL_SW, &priv->status);
-}
-
 /*
  * this function called from handler. Since setting Led command can
  * happen very frequent we postpone led command to be called from
@@ -301,7 +310,7 @@ void iwl_leds_background(struct iwl_priv *priv)
 		priv->last_blink_time = 0;
 		return;
 	}
-	if (is_rf_kill(priv)) {
+	if (iwl_is_rfkill(priv)) {
 		priv->last_blink_time = 0;
 		return;
 	}
@@ -335,7 +344,6 @@ EXPORT_SYMBOL(iwl_leds_background);
 int iwl_leds_register(struct iwl_priv *priv)
 {
 	char *trigger;
-	char name[32];
 	int ret;
 
 	priv->last_blink_rate = 0;
@@ -344,7 +352,8 @@ int iwl_leds_register(struct iwl_priv *priv)
 	priv->allow_blinking = 0;
 
 	trigger = ieee80211_get_radio_led_name(priv->hw);
-	snprintf(name, sizeof(name), "iwl-%s:radio",
+	snprintf(priv->led[IWL_LED_TRG_RADIO].name,
+		 sizeof(priv->led[IWL_LED_TRG_RADIO].name), "iwl-%s:radio",
 		 wiphy_name(priv->hw->wiphy));
 
 	priv->led[IWL_LED_TRG_RADIO].led_on = iwl4965_led_on_reg;
@@ -352,31 +361,33 @@ int iwl_leds_register(struct iwl_priv *priv)
 	priv->led[IWL_LED_TRG_RADIO].led_pattern = NULL;
 
 	ret = iwl_leds_register_led(priv, &priv->led[IWL_LED_TRG_RADIO],
-				   IWL_LED_TRG_RADIO, 1, name, trigger);
+				   IWL_LED_TRG_RADIO, 1, trigger);
 	if (ret)
 		goto exit_fail;
 
 	trigger = ieee80211_get_assoc_led_name(priv->hw);
-	snprintf(name, sizeof(name), "iwl-%s:assoc",
+	snprintf(priv->led[IWL_LED_TRG_ASSOC].name,
+		 sizeof(priv->led[IWL_LED_TRG_ASSOC].name), "iwl-%s:assoc",
 		 wiphy_name(priv->hw->wiphy));
 
 	ret = iwl_leds_register_led(priv, &priv->led[IWL_LED_TRG_ASSOC],
-				   IWL_LED_TRG_ASSOC, 0, name, trigger);
+				   IWL_LED_TRG_ASSOC, 0, trigger);
 
 	/* for assoc always turn led on */
-	priv->led[IWL_LED_TRG_ASSOC].led_on = iwl4965_led_on_reg;
-	priv->led[IWL_LED_TRG_ASSOC].led_off = iwl4965_led_on_reg;
+	priv->led[IWL_LED_TRG_ASSOC].led_on = iwl_led_associate;
+	priv->led[IWL_LED_TRG_ASSOC].led_off = iwl_led_disassociate;
 	priv->led[IWL_LED_TRG_ASSOC].led_pattern = NULL;
 
 	if (ret)
 		goto exit_fail;
 
 	trigger = ieee80211_get_rx_led_name(priv->hw);
-	snprintf(name, sizeof(name), "iwl-%s:RX", wiphy_name(priv->hw->wiphy));
-
+	snprintf(priv->led[IWL_LED_TRG_RX].name,
+		 sizeof(priv->led[IWL_LED_TRG_RX].name), "iwl-%s:RX",
+		 wiphy_name(priv->hw->wiphy));
 
 	ret = iwl_leds_register_led(priv, &priv->led[IWL_LED_TRG_RX],
-				   IWL_LED_TRG_RX, 0, name, trigger);
+				   IWL_LED_TRG_RX, 0, trigger);
 
 	priv->led[IWL_LED_TRG_RX].led_on = iwl_led_associated;
 	priv->led[IWL_LED_TRG_RX].led_off = iwl_led_associated;
@@ -386,9 +397,12 @@ int iwl_leds_register(struct iwl_priv *priv)
 		goto exit_fail;
 
 	trigger = ieee80211_get_tx_led_name(priv->hw);
-	snprintf(name, sizeof(name), "iwl-%s:TX", wiphy_name(priv->hw->wiphy));
+	snprintf(priv->led[IWL_LED_TRG_TX].name,
+		 sizeof(priv->led[IWL_LED_TRG_TX].name), "iwl-%s:TX",
+		 wiphy_name(priv->hw->wiphy));
+
 	ret = iwl_leds_register_led(priv, &priv->led[IWL_LED_TRG_TX],
-				   IWL_LED_TRG_TX, 0, name, trigger);
+				   IWL_LED_TRG_TX, 0, trigger);
 
 	priv->led[IWL_LED_TRG_TX].led_on = iwl_led_associated;
 	priv->led[IWL_LED_TRG_TX].led_off = iwl_led_associated;
diff --git a/drivers/net/wireless/iwlwifi/iwl-led.h b/drivers/net/wireless/iwlwifi/iwl-led.h
index 1980ae5a7e82..588c9ad20e83 100644
--- a/drivers/net/wireless/iwlwifi/iwl-led.h
+++ b/drivers/net/wireless/iwlwifi/iwl-led.h
@@ -52,6 +52,7 @@ enum led_type {
 struct iwl_led {
 	struct iwl_priv *priv;
 	struct led_classdev led_dev;
+	char name[32];
 
 	int (*led_on) (struct iwl_priv *priv, int led_id);
 	int (*led_off) (struct iwl_priv *priv, int led_id);
diff --git a/drivers/net/wireless/iwlwifi/iwl-power.c b/drivers/net/wireless/iwlwifi/iwl-power.c
index 2e71803e09ba..a099c9e30e55 100644
--- a/drivers/net/wireless/iwlwifi/iwl-power.c
+++ b/drivers/net/wireless/iwlwifi/iwl-power.c
@@ -29,7 +29,6 @@
 
 #include <linux/kernel.h>
 #include <linux/module.h>
-#include <linux/version.h>
 #include <linux/init.h>
 
 #include <net/mac80211.h>
@@ -82,7 +81,7 @@
 
 /* default power management (not Tx power) table values */
 /* for tim  0-10 */
-static struct iwl_power_vec_entry range_0[IWL_POWER_AC] = {
+static struct iwl_power_vec_entry range_0[IWL_POWER_MAX] = {
 	{{NOSLP, SLP_TOUT(0), SLP_TOUT(0), SLP_VEC(0, 0, 0, 0, 0)}, 0},
 	{{SLP, SLP_TOUT(200), SLP_TOUT(500), SLP_VEC(1, 2, 2, 2, 0xFF)}, 0},
 	{{SLP, SLP_TOUT(200), SLP_TOUT(300), SLP_VEC(1, 2, 2, 2, 0xFF)}, 0},
@@ -93,7 +92,7 @@ static struct iwl_power_vec_entry range_0[IWL_POWER_AC] = {
 
 
 /* for tim = 3-10 */
-static struct iwl_power_vec_entry range_1[IWL_POWER_AC] = {
+static struct iwl_power_vec_entry range_1[IWL_POWER_MAX] = {
 	{{NOSLP, SLP_TOUT(0), SLP_TOUT(0), SLP_VEC(0, 0, 0, 0, 0)}, 0},
 	{{SLP, SLP_TOUT(200), SLP_TOUT(500), SLP_VEC(1, 2, 3, 4, 4)}, 0},
 	{{SLP, SLP_TOUT(200), SLP_TOUT(300), SLP_VEC(1, 2, 3, 4, 7)}, 0},
@@ -103,7 +102,7 @@ static struct iwl_power_vec_entry range_1[IWL_POWER_AC] = {
 };
 
 /* for tim > 11 */
-static struct iwl_power_vec_entry range_2[IWL_POWER_AC] = {
+static struct iwl_power_vec_entry range_2[IWL_POWER_MAX] = {
 	{{NOSLP, SLP_TOUT(0), SLP_TOUT(0), SLP_VEC(0, 0, 0, 0, 0)}, 0},
 	{{SLP, SLP_TOUT(200), SLP_TOUT(500), SLP_VEC(1, 2, 3, 4, 0xFF)}, 0},
 	{{SLP, SLP_TOUT(200), SLP_TOUT(300), SLP_VEC(2, 4, 6, 7, 0xFF)}, 0},
@@ -112,12 +111,19 @@ static struct iwl_power_vec_entry range_2[IWL_POWER_AC] = {
 	{{SLP, SLP_TOUT(25), SLP_TOUT(25), SLP_VEC(4, 7, 10, 10, 0xFF)}, 0}
 };
 
+/* set card power command */
+static int iwl_set_power(struct iwl_priv *priv, void *cmd)
+{
+	return iwl_send_cmd_pdu_async(priv, POWER_TABLE_CMD,
+				      sizeof(struct iwl_powertable_cmd),
+				      cmd, NULL);
+}
 /* decide the right power level according to association status
  * and battery status
  */
 static u16 iwl_get_auto_power_mode(struct iwl_priv *priv)
 {
-	u16 mode = priv->power_data.user_power_setting;
+	u16 mode;
 
 	switch (priv->power_data.user_power_setting) {
 	case IWL_POWER_AUTO:
@@ -129,12 +135,16 @@ static u16 iwl_get_auto_power_mode(struct iwl_priv *priv)
 		else
 			mode = IWL_POWER_ON_AC_DISASSOC;
 		break;
+	/* FIXME: remove battery and ac from here */
 	case IWL_POWER_BATTERY:
 		mode = IWL_POWER_INDEX_3;
 		break;
 	case IWL_POWER_AC:
 		mode = IWL_POWER_MODE_CAM;
 		break;
+	default:
+		mode = priv->power_data.user_power_setting;
+		break;
 	}
 	return mode;
 }
@@ -144,7 +154,7 @@ static int iwl_power_init_handle(struct iwl_priv *priv)
 {
 	int ret = 0, i;
 	struct iwl_power_mgr *pow_data;
-	int size = sizeof(struct iwl_power_vec_entry) * IWL_POWER_AC;
+	int size = sizeof(struct iwl_power_vec_entry) * IWL_POWER_MAX;
 	u16 pci_pm;
 
 	IWL_DEBUG_POWER("Initialize power \n");
@@ -162,11 +172,11 @@ static int iwl_power_init_handle(struct iwl_priv *priv)
 	if (ret != 0)
 		return 0;
 	else {
-		struct iwl4965_powertable_cmd *cmd;
+		struct iwl_powertable_cmd *cmd;
 
 		IWL_DEBUG_POWER("adjust power command flags\n");
 
-		for (i = 0; i < IWL_POWER_AC; i++) {
+		for (i = 0; i < IWL_POWER_MAX; i++) {
 			cmd = &pow_data->pwr_range_0[i].cmd;
 
 			if (pci_pm & 0x1)
@@ -180,7 +190,7 @@ static int iwl_power_init_handle(struct iwl_priv *priv)
 
 /* adjust power command according to dtim period and power level*/
 static int iwl_update_power_command(struct iwl_priv *priv,
-				    struct iwl4965_powertable_cmd *cmd,
+				    struct iwl_powertable_cmd *cmd,
 				    u16 mode)
 {
 	int ret = 0, i;
@@ -204,7 +214,7 @@ static int iwl_update_power_command(struct iwl_priv *priv,
 		range = &pow_data->pwr_range_2[0];
 
 	period = pow_data->dtim_period;
-	memcpy(cmd, &range[mode].cmd, sizeof(struct iwl4965_powertable_cmd));
+	memcpy(cmd, &range[mode].cmd, sizeof(struct iwl_powertable_cmd));
 
 	if (period == 0) {
 		period = 1;
@@ -258,17 +268,18 @@ int iwl_power_update_mode(struct iwl_priv *priv, u8 refresh)
 	* else user level */
 
 	switch (setting->system_power_setting) {
-	case IWL_POWER_AUTO:
+	case IWL_POWER_SYS_AUTO:
 		final_mode = iwl_get_auto_power_mode(priv);
 		break;
-	case IWL_POWER_BATTERY:
+	case IWL_POWER_SYS_BATTERY:
 		final_mode = IWL_POWER_INDEX_3;
 		break;
-	case IWL_POWER_AC:
+	case IWL_POWER_SYS_AC:
 		final_mode = IWL_POWER_MODE_CAM;
 		break;
 	default:
-		final_mode = setting->system_power_setting;
+		final_mode = IWL_POWER_INDEX_3;
+		WARN_ON(1);
 	}
 
 	if (setting->critical_power_setting > final_mode)
@@ -280,7 +291,7 @@ int iwl_power_update_mode(struct iwl_priv *priv, u8 refresh)
 
 	if (!iwl_is_rfkill(priv) && !setting->power_disabled &&
 	    ((setting->power_mode != final_mode) || refresh)) {
-		struct iwl4965_powertable_cmd cmd;
+		struct iwl_powertable_cmd cmd;
 
 		if (final_mode != IWL_POWER_MODE_CAM)
 			set_bit(STATUS_POWER_PMI, &priv->status);
@@ -291,8 +302,7 @@ int iwl_power_update_mode(struct iwl_priv *priv, u8 refresh)
 		if (final_mode == IWL_POWER_INDEX_5)
 			cmd.flags |= IWL_POWER_FAST_PD;
 
-		if (priv->cfg->ops->lib->set_power)
-			ret = priv->cfg->ops->lib->set_power(priv, &cmd);
+		ret = iwl_set_power(priv, &cmd);
 
 		if (final_mode == IWL_POWER_MODE_CAM)
 			clear_bit(STATUS_POWER_PMI, &priv->status);
@@ -388,7 +398,7 @@ void iwl_power_initialize(struct iwl_priv *priv)
 	iwl_power_init_handle(priv);
 	priv->power_data.user_power_setting = IWL_POWER_AUTO;
 	priv->power_data.power_disabled = 0;
-	priv->power_data.system_power_setting = IWL_POWER_AUTO;
+	priv->power_data.system_power_setting = IWL_POWER_SYS_AUTO;
 	priv->power_data.is_battery_active = 0;
 	priv->power_data.power_disabled = 0;
 	priv->power_data.critical_power_setting = 0;
diff --git a/drivers/net/wireless/iwlwifi/iwl-power.h b/drivers/net/wireless/iwlwifi/iwl-power.h
index b066724a1c2b..abcbbf96a84e 100644
--- a/drivers/net/wireless/iwlwifi/iwl-power.h
+++ b/drivers/net/wireless/iwlwifi/iwl-power.h
@@ -33,12 +33,25 @@
 
 struct iwl_priv;
 
-#define IWL_POWER_MODE_CAM	0x00    /* Continuously Aware Mode, always on */
-#define IWL_POWER_INDEX_3	0x03
-#define IWL_POWER_INDEX_5	0x05
-#define IWL_POWER_AC		0x06
-#define IWL_POWER_BATTERY	0x07
-#define IWL_POWER_AUTO		0x08
+enum {
+	IWL_POWER_MODE_CAM, /* Continuously Aware Mode, always on */
+	IWL_POWER_INDEX_1,
+	IWL_POWER_INDEX_2,
+	IWL_POWER_INDEX_3,
+	IWL_POWER_INDEX_4,
+	IWL_POWER_INDEX_5,
+	IWL_POWER_AUTO,
+	IWL_POWER_MAX = IWL_POWER_AUTO,
+	IWL_POWER_AC,
+	IWL_POWER_BATTERY,
+};
+
+enum {
+	IWL_POWER_SYS_AUTO,
+	IWL_POWER_SYS_AC,
+	IWL_POWER_SYS_BATTERY,
+};
+
 #define IWL_POWER_LIMIT		0x08
 #define IWL_POWER_MASK		0x0F
 #define IWL_POWER_ENABLED	0x10
@@ -46,15 +59,15 @@ struct iwl_priv;
 /* Power management (not Tx power) structures */
 
 struct iwl_power_vec_entry {
-	struct iwl4965_powertable_cmd cmd;
+	struct iwl_powertable_cmd cmd;
 	u8 no_dtim;
 };
 
 struct iwl_power_mgr {
 	spinlock_t lock;
-	struct iwl_power_vec_entry pwr_range_0[IWL_POWER_AC];
-	struct iwl_power_vec_entry pwr_range_1[IWL_POWER_AC];
-	struct iwl_power_vec_entry pwr_range_2[IWL_POWER_AC];
+	struct iwl_power_vec_entry pwr_range_0[IWL_POWER_MAX];
+	struct iwl_power_vec_entry pwr_range_1[IWL_POWER_MAX];
+	struct iwl_power_vec_entry pwr_range_2[IWL_POWER_MAX];
 	u32 dtim_period;
 	/* final power level that used to calculate final power command */
 	u8 power_mode;
diff --git a/drivers/net/wireless/iwlwifi/iwl-prph.h b/drivers/net/wireless/iwlwifi/iwl-prph.h
index 70d9c7568b98..ee5afd48d3af 100644
--- a/drivers/net/wireless/iwlwifi/iwl-prph.h
+++ b/drivers/net/wireless/iwlwifi/iwl-prph.h
@@ -84,14 +84,16 @@
 #define APMG_CLK_VAL_DMA_CLK_RQT	(0x00000200)
 #define APMG_CLK_VAL_BSM_CLK_RQT	(0x00000800)
 
-#define APMG_PS_CTRL_VAL_RESET_REQ	(0x04000000)
 
-#define APMG_PCIDEV_STT_VAL_L1_ACT_DIS	(0x00000800)
+#define APMG_PS_CTRL_EARLY_PWR_OFF_RESET_DIS	(0x00400000)
+#define APMG_PS_CTRL_VAL_RESET_REQ		(0x04000000)
+#define APMG_PS_CTRL_MSK_PWR_SRC		(0x03000000)
+#define APMG_PS_CTRL_VAL_PWR_SRC_VMAIN		(0x00000000)
+#define APMG_PS_CTRL_VAL_PWR_SRC_MAX		(0x01000000) /* 3945 only */
+#define APMG_PS_CTRL_VAL_PWR_SRC_VAUX		(0x02000000)
 
-#define APMG_PS_CTRL_MSK_PWR_SRC              (0x03000000)
-#define APMG_PS_CTRL_VAL_PWR_SRC_VMAIN        (0x00000000)
-#define APMG_PS_CTRL_VAL_PWR_SRC_VAUX         (0x01000000)
 
+#define APMG_PCIDEV_STT_VAL_L1_ACT_DIS		(0x00000800)
 
 /**
  * BSM (Bootstrap State Machine)
diff --git a/drivers/net/wireless/iwlwifi/iwl-rfkill.c b/drivers/net/wireless/iwlwifi/iwl-rfkill.c
index e5e5846e9f25..5d642298f04c 100644
--- a/drivers/net/wireless/iwlwifi/iwl-rfkill.c
+++ b/drivers/net/wireless/iwlwifi/iwl-rfkill.c
@@ -27,7 +27,6 @@
  *****************************************************************************/
 #include <linux/kernel.h>
 #include <linux/module.h>
-#include <linux/version.h>
 #include <linux/init.h>
 
 #include <net/mac80211.h>
diff --git a/drivers/net/wireless/iwlwifi/iwl-rx.c b/drivers/net/wireless/iwlwifi/iwl-rx.c
index e2d9afba38a5..e81bfc42a7cb 100644
--- a/drivers/net/wireless/iwlwifi/iwl-rx.c
+++ b/drivers/net/wireless/iwlwifi/iwl-rx.c
@@ -791,7 +791,7 @@ static inline void iwl_dbg_report_frame(struct iwl_priv *priv,
 
 static void iwl_add_radiotap(struct iwl_priv *priv,
 				 struct sk_buff *skb,
-				 struct iwl4965_rx_phy_res *rx_start,
+				 struct iwl_rx_phy_res *rx_start,
 				 struct ieee80211_rx_status *stats,
 				 u32 ampdu_status)
 {
@@ -1010,8 +1010,8 @@ static void iwl_pass_packet_to_mac80211(struct iwl_priv *priv,
 				       struct ieee80211_rx_status *stats)
 {
 	struct iwl_rx_packet *pkt = (struct iwl_rx_packet *)rxb->skb->data;
-	struct iwl4965_rx_phy_res *rx_start = (include_phy) ?
-	    (struct iwl4965_rx_phy_res *)&(pkt->u.raw[0]) : NULL;
+	struct iwl_rx_phy_res *rx_start = (include_phy) ?
+	    (struct iwl_rx_phy_res *)&(pkt->u.raw[0]) : NULL;
 	struct ieee80211_hdr *hdr;
 	u16 len;
 	__le32 *rx_end;
@@ -1020,7 +1020,7 @@ static void iwl_pass_packet_to_mac80211(struct iwl_priv *priv,
 	u32 ampdu_status_legacy;
 
 	if (!include_phy && priv->last_phy_res[0])
-		rx_start = (struct iwl4965_rx_phy_res *)&priv->last_phy_res[1];
+		rx_start = (struct iwl_rx_phy_res *)&priv->last_phy_res[1];
 
 	if (!rx_start) {
 		IWL_ERROR("MPDU frame without a PHY data\n");
@@ -1032,8 +1032,8 @@ static void iwl_pass_packet_to_mac80211(struct iwl_priv *priv,
 
 		len = le16_to_cpu(rx_start->byte_count);
 
-		rx_end = (__le32 *) ((u8 *) &pkt->u.raw[0] +
-				  sizeof(struct iwl4965_rx_phy_res) +
+		rx_end = (__le32 *)((u8 *) &pkt->u.raw[0] +
+				  sizeof(struct iwl_rx_phy_res) +
 				  rx_start->cfg_phy_cnt + len);
 
 	} else {
@@ -1084,40 +1084,13 @@ static void iwl_pass_packet_to_mac80211(struct iwl_priv *priv,
 }
 
 /* Calc max signal level (dBm) among 3 possible receivers */
-static int iwl_calc_rssi(struct iwl_priv *priv,
-			     struct iwl4965_rx_phy_res *rx_resp)
+static inline int iwl_calc_rssi(struct iwl_priv *priv,
+				struct iwl_rx_phy_res *rx_resp)
 {
-	/* data from PHY/DSP regarding signal strength, etc.,
-	 *   contents are always there, not configurable by host.  */
-	struct iwl4965_rx_non_cfg_phy *ncphy =
-	    (struct iwl4965_rx_non_cfg_phy *)rx_resp->non_cfg_phy;
-	u32 agc = (le16_to_cpu(ncphy->agc_info) & IWL_AGC_DB_MASK)
-			>> IWL_AGC_DB_POS;
-
-	u32 valid_antennae =
-	    (le16_to_cpu(rx_resp->phy_flags) & RX_PHY_FLAGS_ANTENNAE_MASK)
-			>> RX_PHY_FLAGS_ANTENNAE_OFFSET;
-	u8 max_rssi = 0;
-	u32 i;
-
-	/* Find max rssi among 3 possible receivers.
-	 * These values are measured by the digital signal processor (DSP).
-	 * They should stay fairly constant even as the signal strength varies,
-	 *   if the radio's automatic gain control (AGC) is working right.
-	 * AGC value (see below) will provide the "interesting" info. */
-	for (i = 0; i < 3; i++)
-		if (valid_antennae & (1 << i))
-			max_rssi = max(ncphy->rssi_info[i << 1], max_rssi);
-
-	IWL_DEBUG_STATS("Rssi In A %d B %d C %d Max %d AGC dB %d\n",
-		ncphy->rssi_info[0], ncphy->rssi_info[2], ncphy->rssi_info[4],
-		max_rssi, agc);
-
-	/* dBm = max_rssi dB - agc dB - constant.
-	 * Higher AGC (higher radio gain) means lower signal. */
-	return max_rssi - agc - IWL_RSSI_OFFSET;
+	return priv->cfg->ops->utils->calc_rssi(priv, rx_resp);
 }
 
+
 static void iwl_sta_modify_ps_wake(struct iwl_priv *priv, int sta_id)
 {
 	unsigned long flags;
@@ -1180,9 +1153,9 @@ void iwl_rx_reply_rx(struct iwl_priv *priv,
 	 *   this rx packet for legacy frames,
 	 *   or phy data cached from REPLY_RX_PHY_CMD for HT frames. */
 	int include_phy = (pkt->hdr.cmd == REPLY_RX);
-	struct iwl4965_rx_phy_res *rx_start = (include_phy) ?
-		(struct iwl4965_rx_phy_res *)&(pkt->u.raw[0]) :
-		(struct iwl4965_rx_phy_res *)&priv->last_phy_res[1];
+	struct iwl_rx_phy_res *rx_start = (include_phy) ?
+		(struct iwl_rx_phy_res *)&(pkt->u.raw[0]) :
+		(struct iwl_rx_phy_res *)&priv->last_phy_res[1];
 	__le32 *rx_end;
 	unsigned int len = 0;
 	u16 fc;
@@ -1200,7 +1173,10 @@ void iwl_rx_reply_rx(struct iwl_priv *priv,
 
 	rx_status.antenna = 0;
 	rx_status.flag = 0;
-	rx_status.flag |= RX_FLAG_TSFT;
+
+	/* TSF isn't reliable. In order to allow smooth user experience,
+	 * this W/A doesn't propagate it to the mac80211 */
+	/*rx_status.flag |= RX_FLAG_TSFT;*/
 
 	if ((unlikely(rx_start->cfg_phy_cnt > 20))) {
 		IWL_DEBUG_DROP("dsp size out of range [0,20]: %d/n",
@@ -1210,7 +1186,7 @@ void iwl_rx_reply_rx(struct iwl_priv *priv,
 
 	if (!include_phy) {
 		if (priv->last_phy_res[0])
-			rx_start = (struct iwl4965_rx_phy_res *)
+			rx_start = (struct iwl_rx_phy_res *)
 				&priv->last_phy_res[1];
 		else
 			rx_start = NULL;
@@ -1227,7 +1203,7 @@ void iwl_rx_reply_rx(struct iwl_priv *priv,
 
 		len = le16_to_cpu(rx_start->byte_count);
 		rx_end = (__le32 *)(pkt->u.raw + rx_start->cfg_phy_cnt +
-				  sizeof(struct iwl4965_rx_phy_res) + len);
+				  sizeof(struct iwl_rx_phy_res) + len);
 	} else {
 		struct iwl4965_rx_mpdu_res_start *amsdu =
 			(struct iwl4965_rx_mpdu_res_start *)pkt->u.raw;
@@ -1316,6 +1292,6 @@ void iwl_rx_reply_rx_phy(struct iwl_priv *priv,
 	struct iwl_rx_packet *pkt = (struct iwl_rx_packet *)rxb->skb->data;
 	priv->last_phy_res[0] = 1;
 	memcpy(&priv->last_phy_res[1], &(pkt->u.raw[0]),
-	       sizeof(struct iwl4965_rx_phy_res));
+	       sizeof(struct iwl_rx_phy_res));
 }
 EXPORT_SYMBOL(iwl_rx_reply_rx_phy);
diff --git a/drivers/net/wireless/iwlwifi/iwl-scan.c b/drivers/net/wireless/iwlwifi/iwl-scan.c
index efc750d2fc5c..6c8ac3a87d54 100644
--- a/drivers/net/wireless/iwlwifi/iwl-scan.c
+++ b/drivers/net/wireless/iwlwifi/iwl-scan.c
@@ -202,6 +202,7 @@ static int iwl_send_scan_abort(struct iwl_priv *priv)
 		clear_bit(STATUS_SCAN_HW, &priv->status);
 	}
 
+	priv->alloc_rxb_skb--;
 	dev_kfree_skb_any(cmd.meta.u.skb);
 
 	return ret;
@@ -270,6 +271,7 @@ static void iwl_rx_scan_results_notif(struct iwl_priv *priv,
 static void iwl_rx_scan_complete_notif(struct iwl_priv *priv,
 				       struct iwl_rx_mem_buffer *rxb)
 {
+#ifdef CONFIG_IWLWIFI_DEBUG
 	struct iwl_rx_packet *pkt = (struct iwl_rx_packet *)rxb->skb->data;
 	struct iwl_scancomplete_notification *scan_notif = (void *)pkt->u.raw;
 
@@ -277,6 +279,7 @@ static void iwl_rx_scan_complete_notif(struct iwl_priv *priv,
 		       scan_notif->scanned_channels,
 		       scan_notif->tsf_low,
 		       scan_notif->tsf_high, scan_notif->status);
+#endif
 
 	/* The HW is no longer scanning */
 	clear_bit(STATUS_SCAN_HW, &priv->status);
@@ -418,7 +421,7 @@ static int iwl_get_channels_for_scan(struct iwl_priv *priv,
 		else
 			scan_ch->type = SCAN_CHANNEL_TYPE_ACTIVE;
 
-		if ((scan_ch->type & SCAN_CHANNEL_TYPE_ACTIVE) && n_probes)
+		if (n_probes)
 			scan_ch->type |= IWL_SCAN_PROBE_MASK(n_probes);
 
 		scan_ch->active_dwell = cpu_to_le16(active_dwell);
diff --git a/drivers/net/wireless/iwlwifi/iwl-sta.c b/drivers/net/wireless/iwlwifi/iwl-sta.c
index 6d1467d0bd9d..6283a3a707f5 100644
--- a/drivers/net/wireless/iwlwifi/iwl-sta.c
+++ b/drivers/net/wireless/iwlwifi/iwl-sta.c
@@ -207,7 +207,7 @@ static void iwl_set_ht_add_station(struct iwl_priv *priv, u8 index,
 	case WLAN_HT_CAP_MIMO_PS_DISABLED:
 		break;
 	default:
-		IWL_WARNING("Invalid MIMO PS mode %d", mimo_ps_mode);
+		IWL_WARNING("Invalid MIMO PS mode %d\n", mimo_ps_mode);
 		break;
 	}
 
@@ -823,7 +823,7 @@ int iwl_send_lq_cmd(struct iwl_priv *priv,
 	if (lq->sta_id == 0xFF)
 		lq->sta_id = IWL_AP_ID;
 
-	iwl_dump_lq_cmd(priv,lq);
+	iwl_dump_lq_cmd(priv, lq);
 
 	if (iwl_is_associated(priv) && priv->assoc_station_added)
 		return  iwl_send_cmd(priv, &cmd);
@@ -839,7 +839,7 @@ EXPORT_SYMBOL(iwl_send_lq_cmd);
  * for automatic fallback during transmission.
  *
  * NOTE: This sets up a default set of values.  These will be replaced later
- *       if the driver's iwl-4965-rs rate scaling algorithm is used, instead of
+ *       if the driver's iwl-agn-rs rate scaling algorithm is used, instead of
  *       rc80211_simple.
  *
  * NOTE: Run REPLY_ADD_STA command to set up station table entry, before
@@ -969,7 +969,7 @@ int iwl_get_sta_id(struct iwl_priv *priv, struct ieee80211_hdr *hdr)
 		return priv->hw_params.bcast_sta_id;
 
 	default:
-		IWL_WARNING("Unknown mode of operation: %d", priv->iw_mode);
+		IWL_WARNING("Unknown mode of operation: %d\n", priv->iw_mode);
 		return priv->hw_params.bcast_sta_id;
 	}
 }
diff --git a/drivers/net/wireless/iwlwifi/iwl-tx.c b/drivers/net/wireless/iwlwifi/iwl-tx.c
index 9b50b1052b09..78b1a7a4ca40 100644
--- a/drivers/net/wireless/iwlwifi/iwl-tx.c
+++ b/drivers/net/wireless/iwlwifi/iwl-tx.c
@@ -208,11 +208,12 @@ EXPORT_SYMBOL(iwl_txq_update_write_ptr);
  * Free all buffers.
  * 0-fill, but do not free "txq" descriptor structure.
  */
-static void iwl_tx_queue_free(struct iwl_priv *priv, struct iwl_tx_queue *txq)
+static void iwl_tx_queue_free(struct iwl_priv *priv, int txq_id)
 {
+	struct iwl_tx_queue *txq = &priv->txq[txq_id];
 	struct iwl_queue *q = &txq->q;
 	struct pci_dev *dev = priv->pci_dev;
-	int len;
+	int i, slots_num, len;
 
 	if (q->n_bd == 0)
 		return;
@@ -227,7 +228,12 @@ static void iwl_tx_queue_free(struct iwl_priv *priv, struct iwl_tx_queue *txq)
 		len += IWL_MAX_SCAN_SIZE;
 
 	/* De-alloc array of command/tx buffers */
-	pci_free_consistent(dev, len, txq->cmd, txq->dma_addr_cmd);
+	slots_num = (txq_id == IWL_CMD_QUEUE_NUM) ?
+			TFD_CMD_SLOTS : TFD_TX_CMD_SLOTS;
+	for (i = 0; i < slots_num; i++)
+		kfree(txq->cmd[i]);
+	if (txq_id == IWL_CMD_QUEUE_NUM)
+		kfree(txq->cmd[slots_num]);
 
 	/* De-alloc circular buffer of TFDs */
 	if (txq->q.n_bd)
@@ -396,13 +402,11 @@ static int iwl_hw_tx_queue_init(struct iwl_priv *priv,
 /**
  * iwl_tx_queue_init - Allocate and initialize one tx/cmd queue
  */
-static int iwl_tx_queue_init(struct iwl_priv *priv,
-			     struct iwl_tx_queue *txq,
+static int iwl_tx_queue_init(struct iwl_priv *priv, struct iwl_tx_queue *txq,
 			     int slots_num, u32 txq_id)
 {
-	struct pci_dev *dev = priv->pci_dev;
-	int len;
-	int rc = 0;
+	int i, len;
+	int ret;
 
 	/*
 	 * Alloc buffer array for commands (Tx or other types of commands).
@@ -412,20 +416,25 @@ static int iwl_tx_queue_init(struct iwl_priv *priv,
 	 * For normal Tx queues (all other queues), no super-size command
 	 * space is needed.
 	 */
-	len = sizeof(struct iwl_cmd) * slots_num;
-	if (txq_id == IWL_CMD_QUEUE_NUM)
-		len +=  IWL_MAX_SCAN_SIZE;
-	txq->cmd = pci_alloc_consistent(dev, len, &txq->dma_addr_cmd);
-	if (!txq->cmd)
-		return -ENOMEM;
+	len = sizeof(struct iwl_cmd);
+	for (i = 0; i <= slots_num; i++) {
+		if (i == slots_num) {
+			if (txq_id == IWL_CMD_QUEUE_NUM)
+				len += IWL_MAX_SCAN_SIZE;
+			else
+				continue;
+		}
+
+		txq->cmd[i] = kmalloc(len, GFP_KERNEL);
+		if (!txq->cmd[i])
+			goto err;
+	}
 
 	/* Alloc driver data array and TFD circular buffer */
-	rc = iwl_tx_queue_alloc(priv, txq, txq_id);
-	if (rc) {
-		pci_free_consistent(dev, len, txq->cmd, txq->dma_addr_cmd);
+	ret = iwl_tx_queue_alloc(priv, txq, txq_id);
+	if (ret)
+		goto err;
 
-		return -ENOMEM;
-	}
 	txq->need_update = 0;
 
 	/* TFD_QUEUE_SIZE_MAX must be power-of-two size, otherwise
@@ -439,6 +448,17 @@ static int iwl_tx_queue_init(struct iwl_priv *priv,
 	iwl_hw_tx_queue_init(priv, txq);
 
 	return 0;
+err:
+	for (i = 0; i < slots_num; i++) {
+		kfree(txq->cmd[i]);
+		txq->cmd[i] = NULL;
+	}
+
+	if (txq_id == IWL_CMD_QUEUE_NUM) {
+		kfree(txq->cmd[slots_num]);
+		txq->cmd[slots_num] = NULL;
+	}
+	return -ENOMEM;
 }
 /**
  * iwl_hw_txq_ctx_free - Free TXQ Context
@@ -451,7 +471,7 @@ void iwl_hw_txq_ctx_free(struct iwl_priv *priv)
 
 	/* Tx queues */
 	for (txq_id = 0; txq_id < priv->hw_params.max_txq_num; txq_id++)
-		iwl_tx_queue_free(priv, &priv->txq[txq_id]);
+		iwl_tx_queue_free(priv, txq_id);
 
 	/* Keep-warm buffer */
 	iwl_kw_free(priv);
@@ -480,7 +500,7 @@ int iwl_txq_ctx_reset(struct iwl_priv *priv)
 	/* Alloc keep-warm buffer */
 	ret = iwl_kw_alloc(priv);
 	if (ret) {
-		IWL_ERROR("Keep Warm allocation failed");
+		IWL_ERROR("Keep Warm allocation failed\n");
 		goto error_kw;
 	}
 	spin_lock_irqsave(&priv->lock, flags);
@@ -751,20 +771,19 @@ int iwl_tx_skb(struct iwl_priv *priv, struct sk_buff *skb)
 	struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data;
 	struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
 	struct iwl_tfd_frame *tfd;
-	u32 *control_flags;
-	int txq_id = skb_get_queue_mapping(skb);
-	struct iwl_tx_queue *txq = NULL;
-	struct iwl_queue *q = NULL;
+	struct iwl_tx_queue *txq;
+	struct iwl_queue *q;
+	struct iwl_cmd *out_cmd;
+	struct iwl_tx_cmd *tx_cmd;
+	int swq_id, txq_id;
 	dma_addr_t phys_addr;
 	dma_addr_t txcmd_phys;
 	dma_addr_t scratch_phys;
-	struct iwl_cmd *out_cmd = NULL;
-	struct iwl_tx_cmd *tx_cmd;
 	u16 len, idx, len_org;
 	u16 seq_number = 0;
-	u8 id, hdr_len, unicast;
-	u8 sta_id;
 	__le16 fc;
+	u8 hdr_len, unicast;
+	u8 sta_id;
 	u8 wait_write_ptr = 0;
 	u8 tid = 0;
 	u8 *qc = NULL;
@@ -789,7 +808,6 @@ int iwl_tx_skb(struct iwl_priv *priv, struct sk_buff *skb)
 	}
 
 	unicast = !is_multicast_ether_addr(hdr->addr1);
-	id = 0;
 
 	fc = hdr->frame_control;
 
@@ -827,14 +845,16 @@ int iwl_tx_skb(struct iwl_priv *priv, struct sk_buff *skb)
 
 	IWL_DEBUG_TX("station Id %d\n", sta_id);
 
+	swq_id = skb_get_queue_mapping(skb);
+	txq_id = swq_id;
 	if (ieee80211_is_data_qos(fc)) {
 		qc = ieee80211_get_qos_ctl(hdr);
 		tid = qc[0] & 0xf;
-		seq_number = priv->stations[sta_id].tid[tid].seq_number &
-				IEEE80211_SCTL_SEQ;
-		hdr->seq_ctrl = cpu_to_le16(seq_number) |
-			(hdr->seq_ctrl &
-				__constant_cpu_to_le16(IEEE80211_SCTL_FRAG));
+		seq_number = priv->stations[sta_id].tid[tid].seq_number;
+		seq_number &= IEEE80211_SCTL_SEQ;
+		hdr->seq_ctrl = hdr->seq_ctrl &
+				__constant_cpu_to_le16(IEEE80211_SCTL_FRAG);
+		hdr->seq_ctrl |= cpu_to_le16(seq_number);
 		seq_number += 0x10;
 		/* aggregation is on for this <sta,tid> */
 		if (info->flags & IEEE80211_TX_CTL_AMPDU)
@@ -851,7 +871,6 @@ int iwl_tx_skb(struct iwl_priv *priv, struct sk_buff *skb)
 	/* Set up first empty TFD within this queue's circular TFD buffer */
 	tfd = &txq->bd[q->write_ptr];
 	memset(tfd, 0, sizeof(*tfd));
-	control_flags = (u32 *) tfd;
 	idx = get_cmd_index(q, q->write_ptr, 0);
 
 	/* Set up driver data for this TFD */
@@ -859,7 +878,7 @@ int iwl_tx_skb(struct iwl_priv *priv, struct sk_buff *skb)
 	txq->txb[q->write_ptr].skb[0] = skb;
 
 	/* Set up first empty entry in queue's array of Tx/cmd buffers */
-	out_cmd = &txq->cmd[idx];
+	out_cmd = txq->cmd[idx];
 	tx_cmd = &out_cmd->cmd.tx;
 	memset(&out_cmd->hdr, 0, sizeof(out_cmd->hdr));
 	memset(tx_cmd, 0, sizeof(struct iwl_tx_cmd));
@@ -899,14 +918,15 @@ int iwl_tx_skb(struct iwl_priv *priv, struct sk_buff *skb)
 
 	/* Physical address of this Tx command's header (not MAC header!),
 	 * within command buffer array. */
-	txcmd_phys = txq->dma_addr_cmd + sizeof(struct iwl_cmd) * idx +
-		     offsetof(struct iwl_cmd, hdr);
+	txcmd_phys = pci_map_single(priv->pci_dev, out_cmd,
+				sizeof(struct iwl_cmd), PCI_DMA_TODEVICE);
+	txcmd_phys += offsetof(struct iwl_cmd, hdr);
 
 	/* Add buffer containing Tx command and MAC(!) header to TFD's
 	 * first entry */
 	iwl_hw_txq_attach_buf_to_tfd(priv, tfd, txcmd_phys, len);
 
-	if (!(info->flags & IEEE80211_TX_CTL_DO_NOT_ENCRYPT))
+	if (info->control.hw_key)
 		iwl_tx_cmd_build_hwcrypto(priv, info, tx_cmd, skb, sta_id);
 
 	/* Set up TFD's 2nd entry to point directly to remainder of skb,
@@ -962,16 +982,15 @@ int iwl_tx_skb(struct iwl_priv *priv, struct sk_buff *skb)
 	if (ret)
 		return ret;
 
-	if ((iwl_queue_space(q) < q->high_mark)
-	    && priv->mac80211_registered) {
+	if ((iwl_queue_space(q) < q->high_mark) && priv->mac80211_registered) {
 		if (wait_write_ptr) {
 			spin_lock_irqsave(&priv->lock, flags);
 			txq->need_update = 1;
 			iwl_txq_update_write_ptr(priv, txq);
 			spin_unlock_irqrestore(&priv->lock, flags);
+		} else {
+			ieee80211_stop_queue(priv->hw, swq_id);
 		}
-
-		ieee80211_stop_queue(priv->hw, skb_get_queue_mapping(skb));
 	}
 
 	return 0;
@@ -999,13 +1018,12 @@ int iwl_enqueue_hcmd(struct iwl_priv *priv, struct iwl_host_cmd *cmd)
 	struct iwl_tx_queue *txq = &priv->txq[IWL_CMD_QUEUE_NUM];
 	struct iwl_queue *q = &txq->q;
 	struct iwl_tfd_frame *tfd;
-	u32 *control_flags;
 	struct iwl_cmd *out_cmd;
-	u32 idx;
-	u16 fix_size;
 	dma_addr_t phys_addr;
-	int ret;
 	unsigned long flags;
+	int len, ret;
+	u32 idx;
+	u16 fix_size;
 
 	cmd->len = priv->cfg->ops->utils->get_hcmd_size(cmd->id, cmd->len);
 	fix_size = (u16)(cmd->len + sizeof(out_cmd->hdr));
@@ -1031,10 +1049,9 @@ int iwl_enqueue_hcmd(struct iwl_priv *priv, struct iwl_host_cmd *cmd)
 	tfd = &txq->bd[q->write_ptr];
 	memset(tfd, 0, sizeof(*tfd));
 
-	control_flags = (u32 *) tfd;
 
 	idx = get_cmd_index(q, q->write_ptr, cmd->meta.flags & CMD_SIZE_HUGE);
-	out_cmd = &txq->cmd[idx];
+	out_cmd = txq->cmd[idx];
 
 	out_cmd->hdr.cmd = cmd->id;
 	memcpy(&out_cmd->meta, &cmd->meta, sizeof(cmd->meta));
@@ -1048,9 +1065,11 @@ int iwl_enqueue_hcmd(struct iwl_priv *priv, struct iwl_host_cmd *cmd)
 			INDEX_TO_SEQ(q->write_ptr));
 	if (out_cmd->meta.flags & CMD_SIZE_HUGE)
 		out_cmd->hdr.sequence |= cpu_to_le16(SEQ_HUGE_FRAME);
-
-	phys_addr = txq->dma_addr_cmd + sizeof(txq->cmd[0]) * idx +
-			offsetof(struct iwl_cmd, hdr);
+	len = (idx == TFD_CMD_SLOTS) ?
+			IWL_MAX_SCAN_SIZE : sizeof(struct iwl_cmd);
+	phys_addr = pci_map_single(priv->pci_dev, out_cmd, len,
+						PCI_DMA_TODEVICE);
+	phys_addr += offsetof(struct iwl_cmd, hdr);
 	iwl_hw_txq_attach_buf_to_tfd(priv, tfd, phys_addr, fix_size);
 
 	IWL_DEBUG_HC("Sending command %s (#%x), seq: 0x%04X, "
@@ -1115,6 +1134,9 @@ static void iwl_hcmd_queue_reclaim(struct iwl_priv *priv, int txq_id, int index)
 {
 	struct iwl_tx_queue *txq = &priv->txq[txq_id];
 	struct iwl_queue *q = &txq->q;
+	struct iwl_tfd_frame *bd = &txq->bd[index];
+	dma_addr_t dma_addr;
+	int is_odd, buf_len;
 	int nfreed = 0;
 
 	if ((index >= q->n_bd) || (iwl_queue_used(q, index) == 0)) {
@@ -1132,6 +1154,19 @@ static void iwl_hcmd_queue_reclaim(struct iwl_priv *priv, int txq_id, int index)
 					q->write_ptr, q->read_ptr);
 			queue_work(priv->workqueue, &priv->restart);
 		}
+		is_odd = (index/2) & 0x1;
+		if (is_odd) {
+			dma_addr = IWL_GET_BITS(bd->pa[index], tb2_addr_lo16) |
+					(IWL_GET_BITS(bd->pa[index],
+							tb2_addr_hi20) << 16);
+			buf_len = IWL_GET_BITS(bd->pa[index], tb2_len);
+		} else {
+			dma_addr = le32_to_cpu(bd->pa[index].tb1_addr);
+			buf_len = IWL_GET_BITS(bd->pa[index], tb1_len);
+		}
+
+		pci_unmap_single(priv->pci_dev, dma_addr, buf_len,
+				 PCI_DMA_TODEVICE);
 		nfreed++;
 	}
 }
@@ -1163,7 +1198,7 @@ void iwl_tx_cmd_complete(struct iwl_priv *priv, struct iwl_rx_mem_buffer *rxb)
 	BUG_ON(txq_id != IWL_CMD_QUEUE_NUM);
 
 	cmd_index = get_cmd_index(&priv->txq[IWL_CMD_QUEUE_NUM].q, index, huge);
-	cmd = &priv->txq[IWL_CMD_QUEUE_NUM].cmd[cmd_index];
+	cmd = priv->txq[IWL_CMD_QUEUE_NUM].cmd[cmd_index];
 
 	/* Input error checking is done when commands are added to queue. */
 	if (cmd->meta.flags & CMD_WANT_SKB) {
@@ -1391,7 +1426,7 @@ static int iwl_tx_status_reply_compressed_ba(struct iwl_priv *priv,
 	/* For each frame attempted in aggregation,
 	 * update driver's record of tx frame's status. */
 	for (i = 0; i < agg->frame_count ; i++) {
-		ack = bitmap & (1 << i);
+		ack = bitmap & (1ULL << i);
 		successes += !!ack;
 		IWL_DEBUG_TX_REPLY("%s ON i=%d idx=%d raw=%d\n",
 			ack? "ACK":"NACK", i, (agg->start_idx + i) & 0xff,
@@ -1435,7 +1470,7 @@ void iwl_rx_reply_compressed_ba(struct iwl_priv *priv,
 	u16 ba_resp_scd_ssn = le16_to_cpu(ba_resp->scd_ssn);
 
 	if (scd_flow >= priv->hw_params.max_txq_num) {
-		IWL_ERROR("BUG_ON scd_flow is bigger than number of queues");
+		IWL_ERROR("BUG_ON scd_flow is bigger than number of queues\n");
 		return;
 	}
 
diff --git a/drivers/net/wireless/iwlwifi/iwl3945-base.c b/drivers/net/wireless/iwlwifi/iwl3945-base.c
index 4a22d3fba75b..b775d5bab668 100644
--- a/drivers/net/wireless/iwlwifi/iwl3945-base.c
+++ b/drivers/net/wireless/iwlwifi/iwl3945-base.c
@@ -29,7 +29,6 @@
 
 #include <linux/kernel.h>
 #include <linux/module.h>
-#include <linux/version.h>
 #include <linux/init.h>
 #include <linux/pci.h>
 #include <linux/dma-mapping.h>
@@ -275,10 +274,8 @@ static int iwl3945_tx_queue_alloc(struct iwl3945_priv *priv,
 	return 0;
 
  error:
-	if (txq->txb) {
-		kfree(txq->txb);
-		txq->txb = NULL;
-	}
+	kfree(txq->txb);
+	txq->txb = NULL;
 
 	return -ENOMEM;
 }
@@ -365,10 +362,8 @@ void iwl3945_tx_queue_free(struct iwl3945_priv *priv, struct iwl3945_tx_queue *t
 				    txq->q.n_bd, txq->bd, txq->q.dma_addr);
 
 	/* De-alloc array of per-TFD driver data */
-	if (txq->txb) {
-		kfree(txq->txb);
-		txq->txb = NULL;
-	}
+	kfree(txq->txb);
+	txq->txb = NULL;
 
 	/* 0-fill queue descriptor structure */
 	memset(txq, 0, sizeof(*txq));
@@ -1562,7 +1557,7 @@ int iwl3945_eeprom_init(struct iwl3945_priv *priv)
 	BUILD_BUG_ON(sizeof(priv->eeprom) != IWL_EEPROM_IMAGE_SIZE);
 
 	if ((gp & CSR_EEPROM_GP_VALID_MSK) == CSR_EEPROM_GP_BAD_SIGNATURE) {
-		IWL_ERROR("EEPROM not found, EEPROM_GP=0x%08x", gp);
+		IWL_ERROR("EEPROM not found, EEPROM_GP=0x%08x\n", gp);
 		return -ENOENT;
 	}
 
@@ -1587,7 +1582,7 @@ int iwl3945_eeprom_init(struct iwl3945_priv *priv)
 		}
 
 		if (!(r & CSR_EEPROM_REG_READ_VALID_MSK)) {
-			IWL_ERROR("Time out reading EEPROM[%d]", addr);
+			IWL_ERROR("Time out reading EEPROM[%d]\n", addr);
 			return -ETIMEDOUT;
 		}
 		e[addr / 2] = le16_to_cpu((__force __le16)(r >> 16));
@@ -2511,7 +2506,7 @@ static int iwl3945_get_sta_id(struct iwl3945_priv *priv, struct ieee80211_hdr *h
 		return priv->hw_setting.bcast_sta_id;
 
 	default:
-		IWL_WARNING("Unknown mode of operation: %d", priv->iw_mode);
+		IWL_WARNING("Unknown mode of operation: %d\n", priv->iw_mode);
 		return priv->hw_setting.bcast_sta_id;
 	}
 }
@@ -2667,7 +2662,7 @@ static int iwl3945_tx_skb(struct iwl3945_priv *priv, struct sk_buff *skb)
 	 * first entry */
 	iwl3945_hw_txq_attach_buf_to_tfd(priv, tfd, txcmd_phys, len);
 
-	if (!(info->flags & IEEE80211_TX_CTL_DO_NOT_ENCRYPT))
+	if (info->control.hw_key)
 		iwl3945_build_tx_cmd_hwcrypto(priv, info, out_cmd, skb, 0);
 
 	/* Set up TFD's 2nd entry to point directly to remainder of skb,
@@ -2703,9 +2698,8 @@ static int iwl3945_tx_skb(struct iwl3945_priv *priv, struct sk_buff *skb)
 
 	if (!ieee80211_has_morefrags(hdr->frame_control)) {
 		txq->need_update = 1;
-		if (qc) {
+		if (qc)
 			priv->stations[sta_id].tid[tid].seq_number = seq_number;
-		}
 	} else {
 		wait_write_ptr = 1;
 		txq->need_update = 0;
@@ -3813,7 +3807,7 @@ int iwl3945_calc_db_from_ratio(int sig_ratio)
 	/* 100:1 or higher, divide by 10 and use table,
 	 *   add 20 dB to make up for divide by 10 */
 	if (sig_ratio >= 100)
-		return (20 + (int)ratio2dB[sig_ratio/10]);
+		return 20 + (int)ratio2dB[sig_ratio/10];
 
 	/* We shouldn't see this */
 	if (sig_ratio < 1)
@@ -5088,7 +5082,7 @@ static void iwl3945_dealloc_ucode_pci(struct iwl3945_priv *priv)
  * iwl3945_verify_inst_full - verify runtime uCode image in card vs. host,
  *     looking at all data.
  */
-static int iwl3945_verify_inst_full(struct iwl3945_priv *priv, __le32 * image, u32 len)
+static int iwl3945_verify_inst_full(struct iwl3945_priv *priv, __le32 *image, u32 len)
 {
 	u32 val;
 	u32 save_len = len;
@@ -5237,7 +5231,7 @@ static int iwl3945_verify_bsm(struct iwl3945_priv *priv)
 	val = iwl3945_read_prph(priv, BSM_WR_DWCOUNT_REG);
 	for (reg = BSM_SRAM_LOWER_BOUND;
 	     reg < BSM_SRAM_LOWER_BOUND + len;
-	     reg += sizeof(u32), image ++) {
+	     reg += sizeof(u32), image++) {
 		val = iwl3945_read_prph(priv, reg);
 		if (val != le32_to_cpu(*image)) {
 			IWL_ERROR("BSM uCode verification failed at "
@@ -6336,7 +6330,7 @@ static void iwl3945_bg_post_associate(struct work_struct *data)
 	DECLARE_MAC_BUF(mac);
 
 	if (priv->iw_mode == IEEE80211_IF_TYPE_AP) {
-		IWL_ERROR("%s Should not be called in AP mode\n", __FUNCTION__);
+		IWL_ERROR("%s Should not be called in AP mode\n", __func__);
 		return;
 	}
 
@@ -6417,7 +6411,7 @@ static void iwl3945_bg_post_associate(struct work_struct *data)
 
 	default:
 		 IWL_ERROR("%s Should not be called in %d mode\n",
-			   __FUNCTION__, priv->iw_mode);
+			   __func__, priv->iw_mode);
 		break;
 	}
 
@@ -6594,12 +6588,6 @@ static int iwl3945_mac_tx(struct ieee80211_hw *hw, struct sk_buff *skb)
 
 	IWL_DEBUG_MAC80211("enter\n");
 
-	if (priv->iw_mode == IEEE80211_IF_TYPE_MNTR) {
-		IWL_DEBUG_MAC80211("leave - monitor\n");
-		dev_kfree_skb_any(skb);
-		return 0;
-	}
-
 	IWL_DEBUG_TX("dev->xmit(%d bytes) at rate 0x%02x\n", skb->len,
 		     ieee80211_get_tx_rate(hw, IEEE80211_SKB_CB(skb))->bitrate);
 
@@ -7456,7 +7444,7 @@ static ssize_t show_measurement(struct device *d,
 	struct iwl3945_priv *priv = dev_get_drvdata(d);
 	struct iwl3945_spectrum_notification measure_report;
 	u32 size = sizeof(measure_report), len = 0, ofs = 0;
-	u8 *data = (u8 *) & measure_report;
+	u8 *data = (u8 *)&measure_report;
 	unsigned long flags;
 
 	spin_lock_irqsave(&priv->lock, flags);
@@ -7627,7 +7615,7 @@ static ssize_t show_power_level(struct device *d,
 	else
 		p += sprintf(p, " \n");
 
-	return (p - buf + 1);
+	return p - buf + 1;
 
 }
 
@@ -7649,7 +7637,7 @@ static ssize_t show_statistics(struct device *d,
 	struct iwl3945_priv *priv = dev_get_drvdata(d);
 	u32 size = sizeof(struct iwl3945_notif_statistics);
 	u32 len = 0, ofs = 0;
-	u8 *data = (u8 *) & priv->statistics;
+	u8 *data = (u8 *)&priv->statistics;
 	int rc = 0;
 
 	if (!iwl3945_is_alive(priv))
@@ -7899,8 +7887,7 @@ static int iwl3945_pci_probe(struct pci_dev *pdev, const struct pci_device_id *e
 	priv->ibss_beacon = NULL;
 
 	/* Tell mac80211 our characteristics */
-	hw->flags = IEEE80211_HW_HOST_GEN_BEACON_TEMPLATE |
-		    IEEE80211_HW_SIGNAL_DBM |
+	hw->flags = IEEE80211_HW_SIGNAL_DBM |
 		    IEEE80211_HW_NOISE_DBM;
 
 	/* 4 EDCA QOS priorities */
@@ -8004,16 +7991,16 @@ static int iwl3945_pci_probe(struct pci_dev *pdev, const struct pci_device_id *e
 
 	/* nic init */
 	iwl3945_set_bit(priv, CSR_GIO_CHICKEN_BITS,
-                    CSR_GIO_CHICKEN_BITS_REG_BIT_DIS_L0S_EXIT_TIMER);
-
-        iwl3945_set_bit(priv, CSR_GP_CNTRL, CSR_GP_CNTRL_REG_FLAG_INIT_DONE);
-        err = iwl3945_poll_bit(priv, CSR_GP_CNTRL,
-                          CSR_GP_CNTRL_REG_FLAG_MAC_CLOCK_READY,
-                          CSR_GP_CNTRL_REG_FLAG_MAC_CLOCK_READY, 25000);
-        if (err < 0) {
-                IWL_DEBUG_INFO("Failed to init the card\n");
+			CSR_GIO_CHICKEN_BITS_REG_BIT_DIS_L0S_EXIT_TIMER);
+
+	iwl3945_set_bit(priv, CSR_GP_CNTRL, CSR_GP_CNTRL_REG_FLAG_INIT_DONE);
+	err = iwl3945_poll_bit(priv, CSR_GP_CNTRL,
+			       CSR_GP_CNTRL_REG_FLAG_MAC_CLOCK_READY,
+			       CSR_GP_CNTRL_REG_FLAG_MAC_CLOCK_READY, 25000);
+	if (err < 0) {
+		IWL_DEBUG_INFO("Failed to init the card\n");
 		goto out_remove_sysfs;
-        }
+	}
 	/* Read the EEPROM */
 	err = iwl3945_eeprom_init(priv);
 	if (err) {
@@ -8115,9 +8102,8 @@ static void __devexit iwl3945_pci_remove(struct pci_dev *pdev)
 	iwl3945_unset_hw_setting(priv);
 	iwl3945_clear_stations_table(priv);
 
-	if (priv->mac80211_registered) {
+	if (priv->mac80211_registered)
 		ieee80211_unregister_hw(priv->hw);
-	}
 
 	/*netif_stop_queue(dev); */
 	flush_workqueue(priv->workqueue);
diff --git a/drivers/net/wireless/iwlwifi/iwl4965-base.c b/drivers/net/wireless/iwlwifi/iwl4965-base.c
deleted file mode 100644
index 71f5da3fe5c4..000000000000
--- a/drivers/net/wireless/iwlwifi/iwl4965-base.c
+++ /dev/null
@@ -1,4460 +0,0 @@
-/******************************************************************************
- *
- * Copyright(c) 2003 - 2008 Intel Corporation. All rights reserved.
- *
- * Portions of this file are derived from the ipw3945 project, as well
- * as portions of the ieee80211 subsystem header files.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of version 2 of the GNU General Public License as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * this program; if not, write to the Free Software Foundation, Inc.,
- * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
- *
- * The full GNU General Public License is included in this distribution in the
- * file called LICENSE.
- *
- * Contact Information:
- * James P. Ketrenos <ipw2100-admin@linux.intel.com>
- * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
- *
- *****************************************************************************/
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/version.h>
-#include <linux/init.h>
-#include <linux/pci.h>
-#include <linux/dma-mapping.h>
-#include <linux/delay.h>
-#include <linux/skbuff.h>
-#include <linux/netdevice.h>
-#include <linux/wireless.h>
-#include <linux/firmware.h>
-#include <linux/etherdevice.h>
-#include <linux/if_arp.h>
-
-#include <net/mac80211.h>
-
-#include <asm/div64.h>
-
-#include "iwl-eeprom.h"
-#include "iwl-dev.h"
-#include "iwl-core.h"
-#include "iwl-io.h"
-#include "iwl-helpers.h"
-#include "iwl-sta.h"
-#include "iwl-calib.h"
-
-
-/******************************************************************************
- *
- * module boiler plate
- *
- ******************************************************************************/
-
-/*
- * module name, copyright, version, etc.
- * NOTE: DRV_NAME is defined in iwlwifi.h for use by iwl-debug.h and printk
- */
-
-#define DRV_DESCRIPTION	"Intel(R) Wireless WiFi Link 4965AGN driver for Linux"
-
-#ifdef CONFIG_IWLWIFI_DEBUG
-#define VD "d"
-#else
-#define VD
-#endif
-
-#ifdef CONFIG_IWL4965_SPECTRUM_MEASUREMENT
-#define VS "s"
-#else
-#define VS
-#endif
-
-#define DRV_VERSION     IWLWIFI_VERSION VD VS
-
-
-MODULE_DESCRIPTION(DRV_DESCRIPTION);
-MODULE_VERSION(DRV_VERSION);
-MODULE_AUTHOR(DRV_COPYRIGHT);
-MODULE_LICENSE("GPL");
-
-/*************** STATION TABLE MANAGEMENT ****
- * mac80211 should be examined to determine if sta_info is duplicating
- * the functionality provided here
- */
-
-/**************************************************************/
-
-
-
-static void iwl4965_set_rxon_hwcrypto(struct iwl_priv *priv, int hw_decrypt)
-{
-	struct iwl_rxon_cmd *rxon = &priv->staging_rxon;
-
-	if (hw_decrypt)
-		rxon->filter_flags &= ~RXON_FILTER_DIS_DECRYPT_MSK;
-	else
-		rxon->filter_flags |= RXON_FILTER_DIS_DECRYPT_MSK;
-
-}
-
-/**
- * iwl4965_check_rxon_cmd - validate RXON structure is valid
- *
- * NOTE:  This is really only useful during development and can eventually
- * be #ifdef'd out once the driver is stable and folks aren't actively
- * making changes
- */
-static int iwl4965_check_rxon_cmd(struct iwl_rxon_cmd *rxon)
-{
-	int error = 0;
-	int counter = 1;
-
-	if (rxon->flags & RXON_FLG_BAND_24G_MSK) {
-		error |= le32_to_cpu(rxon->flags &
-				(RXON_FLG_TGJ_NARROW_BAND_MSK |
-				 RXON_FLG_RADAR_DETECT_MSK));
-		if (error)
-			IWL_WARNING("check 24G fields %d | %d\n",
-				    counter++, error);
-	} else {
-		error |= (rxon->flags & RXON_FLG_SHORT_SLOT_MSK) ?
-				0 : le32_to_cpu(RXON_FLG_SHORT_SLOT_MSK);
-		if (error)
-			IWL_WARNING("check 52 fields %d | %d\n",
-				    counter++, error);
-		error |= le32_to_cpu(rxon->flags & RXON_FLG_CCK_MSK);
-		if (error)
-			IWL_WARNING("check 52 CCK %d | %d\n",
-				    counter++, error);
-	}
-	error |= (rxon->node_addr[0] | rxon->bssid_addr[0]) & 0x1;
-	if (error)
-		IWL_WARNING("check mac addr %d | %d\n", counter++, error);
-
-	/* make sure basic rates 6Mbps and 1Mbps are supported */
-	error |= (((rxon->ofdm_basic_rates & IWL_RATE_6M_MASK) == 0) &&
-		  ((rxon->cck_basic_rates & IWL_RATE_1M_MASK) == 0));
-	if (error)
-		IWL_WARNING("check basic rate %d | %d\n", counter++, error);
-
-	error |= (le16_to_cpu(rxon->assoc_id) > 2007);
-	if (error)
-		IWL_WARNING("check assoc id %d | %d\n", counter++, error);
-
-	error |= ((rxon->flags & (RXON_FLG_CCK_MSK | RXON_FLG_SHORT_SLOT_MSK))
-			== (RXON_FLG_CCK_MSK | RXON_FLG_SHORT_SLOT_MSK));
-	if (error)
-		IWL_WARNING("check CCK and short slot %d | %d\n",
-			    counter++, error);
-
-	error |= ((rxon->flags & (RXON_FLG_CCK_MSK | RXON_FLG_AUTO_DETECT_MSK))
-			== (RXON_FLG_CCK_MSK | RXON_FLG_AUTO_DETECT_MSK));
-	if (error)
-		IWL_WARNING("check CCK & auto detect %d | %d\n",
-			    counter++, error);
-
-	error |= ((rxon->flags & (RXON_FLG_AUTO_DETECT_MSK |
-			RXON_FLG_TGG_PROTECT_MSK)) == RXON_FLG_TGG_PROTECT_MSK);
-	if (error)
-		IWL_WARNING("check TGG and auto detect %d | %d\n",
-			    counter++, error);
-
-	if (error)
-		IWL_WARNING("Tuning to channel %d\n",
-			    le16_to_cpu(rxon->channel));
-
-	if (error) {
-		IWL_ERROR("Not a valid iwl4965_rxon_assoc_cmd field values\n");
-		return -1;
-	}
-	return 0;
-}
-
-/**
- * iwl4965_full_rxon_required - check if full RXON (vs RXON_ASSOC) cmd is needed
- * @priv: staging_rxon is compared to active_rxon
- *
- * If the RXON structure is changing enough to require a new tune,
- * or is clearing the RXON_FILTER_ASSOC_MSK, then return 1 to indicate that
- * a new tune (full RXON command, rather than RXON_ASSOC cmd) is required.
- */
-static int iwl4965_full_rxon_required(struct iwl_priv *priv)
-{
-
-	/* These items are only settable from the full RXON command */
-	if (!(iwl_is_associated(priv)) ||
-	    compare_ether_addr(priv->staging_rxon.bssid_addr,
-			       priv->active_rxon.bssid_addr) ||
-	    compare_ether_addr(priv->staging_rxon.node_addr,
-			       priv->active_rxon.node_addr) ||
-	    compare_ether_addr(priv->staging_rxon.wlap_bssid_addr,
-			       priv->active_rxon.wlap_bssid_addr) ||
-	    (priv->staging_rxon.dev_type != priv->active_rxon.dev_type) ||
-	    (priv->staging_rxon.channel != priv->active_rxon.channel) ||
-	    (priv->staging_rxon.air_propagation !=
-	     priv->active_rxon.air_propagation) ||
-	    (priv->staging_rxon.ofdm_ht_single_stream_basic_rates !=
-	     priv->active_rxon.ofdm_ht_single_stream_basic_rates) ||
-	    (priv->staging_rxon.ofdm_ht_dual_stream_basic_rates !=
-	     priv->active_rxon.ofdm_ht_dual_stream_basic_rates) ||
-	    (priv->staging_rxon.rx_chain != priv->active_rxon.rx_chain) ||
-	    (priv->staging_rxon.assoc_id != priv->active_rxon.assoc_id))
-		return 1;
-
-	/* flags, filter_flags, ofdm_basic_rates, and cck_basic_rates can
-	 * be updated with the RXON_ASSOC command -- however only some
-	 * flag transitions are allowed using RXON_ASSOC */
-
-	/* Check if we are not switching bands */
-	if ((priv->staging_rxon.flags & RXON_FLG_BAND_24G_MSK) !=
-	    (priv->active_rxon.flags & RXON_FLG_BAND_24G_MSK))
-		return 1;
-
-	/* Check if we are switching association toggle */
-	if ((priv->staging_rxon.filter_flags & RXON_FILTER_ASSOC_MSK) !=
-		(priv->active_rxon.filter_flags & RXON_FILTER_ASSOC_MSK))
-		return 1;
-
-	return 0;
-}
-
-/**
- * iwl4965_commit_rxon - commit staging_rxon to hardware
- *
- * The RXON command in staging_rxon is committed to the hardware and
- * the active_rxon structure is updated with the new data.  This
- * function correctly transitions out of the RXON_ASSOC_MSK state if
- * a HW tune is required based on the RXON structure changes.
- */
-static int iwl4965_commit_rxon(struct iwl_priv *priv)
-{
-	/* cast away the const for active_rxon in this function */
-	struct iwl_rxon_cmd *active_rxon = (void *)&priv->active_rxon;
-	DECLARE_MAC_BUF(mac);
-	int ret;
-	bool new_assoc =
-		!!(priv->staging_rxon.filter_flags & RXON_FILTER_ASSOC_MSK);
-
-	if (!iwl_is_alive(priv))
-		return -EBUSY;
-
-	/* always get timestamp with Rx frame */
-	priv->staging_rxon.flags |= RXON_FLG_TSF2HOST_MSK;
-	/* allow CTS-to-self if possible. this is relevant only for
-	 * 5000, but will not damage 4965 */
-	priv->staging_rxon.flags |= RXON_FLG_SELF_CTS_EN;
-
-	ret = iwl4965_check_rxon_cmd(&priv->staging_rxon);
-	if (ret) {
-		IWL_ERROR("Invalid RXON configuration.  Not committing.\n");
-		return -EINVAL;
-	}
-
-	/* If we don't need to send a full RXON, we can use
-	 * iwl4965_rxon_assoc_cmd which is used to reconfigure filter
-	 * and other flags for the current radio configuration. */
-	if (!iwl4965_full_rxon_required(priv)) {
-		ret = iwl_send_rxon_assoc(priv);
-		if (ret) {
-			IWL_ERROR("Error setting RXON_ASSOC (%d)\n", ret);
-			return ret;
-		}
-
-		memcpy(active_rxon, &priv->staging_rxon, sizeof(*active_rxon));
-		return 0;
-	}
-
-	/* station table will be cleared */
-	priv->assoc_station_added = 0;
-
-	/* If we are currently associated and the new config requires
-	 * an RXON_ASSOC and the new config wants the associated mask enabled,
-	 * we must clear the associated from the active configuration
-	 * before we apply the new config */
-	if (iwl_is_associated(priv) && new_assoc) {
-		IWL_DEBUG_INFO("Toggling associated bit on current RXON\n");
-		active_rxon->filter_flags &= ~RXON_FILTER_ASSOC_MSK;
-
-		ret = iwl_send_cmd_pdu(priv, REPLY_RXON,
-				      sizeof(struct iwl_rxon_cmd),
-				      &priv->active_rxon);
-
-		/* If the mask clearing failed then we set
-		 * active_rxon back to what it was previously */
-		if (ret) {
-			active_rxon->filter_flags |= RXON_FILTER_ASSOC_MSK;
-			IWL_ERROR("Error clearing ASSOC_MSK (%d)\n", ret);
-			return ret;
-		}
-	}
-
-	IWL_DEBUG_INFO("Sending RXON\n"
-		       "* with%s RXON_FILTER_ASSOC_MSK\n"
-		       "* channel = %d\n"
-		       "* bssid = %s\n",
-		       (new_assoc ? "" : "out"),
-		       le16_to_cpu(priv->staging_rxon.channel),
-		       print_mac(mac, priv->staging_rxon.bssid_addr));
-
-	iwl4965_set_rxon_hwcrypto(priv, !priv->hw_params.sw_crypto);
-
-	/* Apply the new configuration
-	 * RXON unassoc clears the station table in uCode, send it before
-	 * we add the bcast station. If assoc bit is set, we will send RXON
-	 * after having added the bcast and bssid station.
-	 */
-	if (!new_assoc) {
-		ret = iwl_send_cmd_pdu(priv, REPLY_RXON,
-			      sizeof(struct iwl_rxon_cmd), &priv->staging_rxon);
-		if (ret) {
-			IWL_ERROR("Error setting new RXON (%d)\n", ret);
-			return ret;
-		}
-		memcpy(active_rxon, &priv->staging_rxon, sizeof(*active_rxon));
-	}
-
-	iwl_clear_stations_table(priv);
-
-	if (!priv->error_recovering)
-		priv->start_calib = 0;
-
-	/* Add the broadcast address so we can send broadcast frames */
-	if (iwl_rxon_add_station(priv, iwl_bcast_addr, 0) ==
-						IWL_INVALID_STATION) {
-		IWL_ERROR("Error adding BROADCAST address for transmit.\n");
-		return -EIO;
-	}
-
-	/* If we have set the ASSOC_MSK and we are in BSS mode then
-	 * add the IWL_AP_ID to the station rate table */
-	if (new_assoc) {
-		if (priv->iw_mode == IEEE80211_IF_TYPE_STA) {
-			ret = iwl_rxon_add_station(priv,
-					   priv->active_rxon.bssid_addr, 1);
-			if (ret == IWL_INVALID_STATION) {
-				IWL_ERROR("Error adding AP address for TX.\n");
-				return -EIO;
-			}
-			priv->assoc_station_added = 1;
-			if (priv->default_wep_key &&
-			    iwl_send_static_wepkey_cmd(priv, 0))
-				IWL_ERROR("Could not send WEP static key.\n");
-		}
-
-		/* Apply the new configuration
-		 * RXON assoc doesn't clear the station table in uCode,
-		 */
-		ret = iwl_send_cmd_pdu(priv, REPLY_RXON,
-			      sizeof(struct iwl_rxon_cmd), &priv->staging_rxon);
-		if (ret) {
-			IWL_ERROR("Error setting new RXON (%d)\n", ret);
-			return ret;
-		}
-		memcpy(active_rxon, &priv->staging_rxon, sizeof(*active_rxon));
-	}
-
-	iwl_init_sensitivity(priv);
-
-	/* If we issue a new RXON command which required a tune then we must
-	 * send a new TXPOWER command or we won't be able to Tx any frames */
-	ret = iwl_set_tx_power(priv, priv->tx_power_user_lmt, true);
-	if (ret) {
-		IWL_ERROR("Error sending TX power (%d)\n", ret);
-		return ret;
-	}
-
-	return 0;
-}
-
-void iwl4965_update_chain_flags(struct iwl_priv *priv)
-{
-
-	iwl_set_rxon_chain(priv);
-	iwl4965_commit_rxon(priv);
-}
-
-static int iwl4965_send_bt_config(struct iwl_priv *priv)
-{
-	struct iwl4965_bt_cmd bt_cmd = {
-		.flags = 3,
-		.lead_time = 0xAA,
-		.max_kill = 1,
-		.kill_ack_mask = 0,
-		.kill_cts_mask = 0,
-	};
-
-	return iwl_send_cmd_pdu(priv, REPLY_BT_CONFIG,
-				sizeof(struct iwl4965_bt_cmd), &bt_cmd);
-}
-
-static void iwl_clear_free_frames(struct iwl_priv *priv)
-{
-	struct list_head *element;
-
-	IWL_DEBUG_INFO("%d frames on pre-allocated heap on clear.\n",
-		       priv->frames_count);
-
-	while (!list_empty(&priv->free_frames)) {
-		element = priv->free_frames.next;
-		list_del(element);
-		kfree(list_entry(element, struct iwl_frame, list));
-		priv->frames_count--;
-	}
-
-	if (priv->frames_count) {
-		IWL_WARNING("%d frames still in use.  Did we lose one?\n",
-			    priv->frames_count);
-		priv->frames_count = 0;
-	}
-}
-
-static struct iwl_frame *iwl_get_free_frame(struct iwl_priv *priv)
-{
-	struct iwl_frame *frame;
-	struct list_head *element;
-	if (list_empty(&priv->free_frames)) {
-		frame = kzalloc(sizeof(*frame), GFP_KERNEL);
-		if (!frame) {
-			IWL_ERROR("Could not allocate frame!\n");
-			return NULL;
-		}
-
-		priv->frames_count++;
-		return frame;
-	}
-
-	element = priv->free_frames.next;
-	list_del(element);
-	return list_entry(element, struct iwl_frame, list);
-}
-
-static void iwl_free_frame(struct iwl_priv *priv, struct iwl_frame *frame)
-{
-	memset(frame, 0, sizeof(*frame));
-	list_add(&frame->list, &priv->free_frames);
-}
-
-unsigned int iwl4965_fill_beacon_frame(struct iwl_priv *priv,
-				struct ieee80211_hdr *hdr,
-				const u8 *dest, int left)
-{
-
-	if (!iwl_is_associated(priv) || !priv->ibss_beacon ||
-	    ((priv->iw_mode != IEEE80211_IF_TYPE_IBSS) &&
-	     (priv->iw_mode != IEEE80211_IF_TYPE_AP)))
-		return 0;
-
-	if (priv->ibss_beacon->len > left)
-		return 0;
-
-	memcpy(hdr, priv->ibss_beacon->data, priv->ibss_beacon->len);
-
-	return priv->ibss_beacon->len;
-}
-
-static u8 iwl4965_rate_get_lowest_plcp(struct iwl_priv *priv)
-{
-	int i;
-	int rate_mask;
-
-	/* Set rate mask*/
-	if (priv->staging_rxon.flags & RXON_FLG_BAND_24G_MSK)
-		rate_mask = priv->active_rate_basic & 0xF;
-	else
-		rate_mask = priv->active_rate_basic & 0xFF0;
-
-	/* Find lowest valid rate */
-	for (i = IWL_RATE_1M_INDEX; i != IWL_RATE_INVALID;
-					i = iwl_rates[i].next_ieee) {
-		if (rate_mask & (1 << i))
-			return iwl_rates[i].plcp;
-	}
-
-	/* No valid rate was found. Assign the lowest one */
-	if (priv->staging_rxon.flags & RXON_FLG_BAND_24G_MSK)
-		return IWL_RATE_1M_PLCP;
-	else
-		return IWL_RATE_6M_PLCP;
-}
-
-static int iwl4965_send_beacon_cmd(struct iwl_priv *priv)
-{
-	struct iwl_frame *frame;
-	unsigned int frame_size;
-	int rc;
-	u8 rate;
-
-	frame = iwl_get_free_frame(priv);
-
-	if (!frame) {
-		IWL_ERROR("Could not obtain free frame buffer for beacon "
-			  "command.\n");
-		return -ENOMEM;
-	}
-
-	rate = iwl4965_rate_get_lowest_plcp(priv);
-
-	frame_size = iwl4965_hw_get_beacon_cmd(priv, frame, rate);
-
-	rc = iwl_send_cmd_pdu(priv, REPLY_TX_BEACON, frame_size,
-			      &frame->u.cmd[0]);
-
-	iwl_free_frame(priv, frame);
-
-	return rc;
-}
-
-/******************************************************************************
- *
- * Misc. internal state and helper functions
- *
- ******************************************************************************/
-
-static void iwl4965_ht_conf(struct iwl_priv *priv,
-			    struct ieee80211_bss_conf *bss_conf)
-{
-	struct ieee80211_ht_info *ht_conf = bss_conf->ht_conf;
-	struct ieee80211_ht_bss_info *ht_bss_conf = bss_conf->ht_bss_conf;
-	struct iwl_ht_info *iwl_conf = &priv->current_ht_config;
-
-	IWL_DEBUG_MAC80211("enter: \n");
-
-	iwl_conf->is_ht = bss_conf->assoc_ht;
-
-	if (!iwl_conf->is_ht)
-		return;
-
-	priv->ps_mode = (u8)((ht_conf->cap & IEEE80211_HT_CAP_MIMO_PS) >> 2);
-
-	if (ht_conf->cap & IEEE80211_HT_CAP_SGI_20)
-		iwl_conf->sgf |= HT_SHORT_GI_20MHZ;
-	if (ht_conf->cap & IEEE80211_HT_CAP_SGI_40)
-		iwl_conf->sgf |= HT_SHORT_GI_40MHZ;
-
-	iwl_conf->is_green_field = !!(ht_conf->cap & IEEE80211_HT_CAP_GRN_FLD);
-	iwl_conf->max_amsdu_size =
-		!!(ht_conf->cap & IEEE80211_HT_CAP_MAX_AMSDU);
-
-	iwl_conf->supported_chan_width =
-		!!(ht_conf->cap & IEEE80211_HT_CAP_SUP_WIDTH);
-	iwl_conf->extension_chan_offset =
-		ht_bss_conf->bss_cap & IEEE80211_HT_IE_CHA_SEC_OFFSET;
-	/* If no above or below channel supplied disable FAT channel */
-	if (iwl_conf->extension_chan_offset != IEEE80211_HT_IE_CHA_SEC_ABOVE &&
-	    iwl_conf->extension_chan_offset != IEEE80211_HT_IE_CHA_SEC_BELOW) {
-		iwl_conf->extension_chan_offset = IEEE80211_HT_IE_CHA_SEC_NONE;
-		iwl_conf->supported_chan_width = 0;
-	}
-
-	iwl_conf->tx_mimo_ps_mode =
-		(u8)((ht_conf->cap & IEEE80211_HT_CAP_MIMO_PS) >> 2);
-	memcpy(iwl_conf->supp_mcs_set, ht_conf->supp_mcs_set, 16);
-
-	iwl_conf->control_channel = ht_bss_conf->primary_channel;
-	iwl_conf->tx_chan_width =
-		!!(ht_bss_conf->bss_cap & IEEE80211_HT_IE_CHA_WIDTH);
-	iwl_conf->ht_protection =
-		ht_bss_conf->bss_op_mode & IEEE80211_HT_IE_HT_PROTECTION;
-	iwl_conf->non_GF_STA_present =
-		!!(ht_bss_conf->bss_op_mode & IEEE80211_HT_IE_NON_GF_STA_PRSNT);
-
-	IWL_DEBUG_MAC80211("control channel %d\n", iwl_conf->control_channel);
-	IWL_DEBUG_MAC80211("leave\n");
-}
-
-/*
- * QoS  support
-*/
-static void iwl_activate_qos(struct iwl_priv *priv, u8 force)
-{
-	if (test_bit(STATUS_EXIT_PENDING, &priv->status))
-		return;
-
-	if (!priv->qos_data.qos_enable)
-		return;
-
-	priv->qos_data.def_qos_parm.qos_flags = 0;
-
-	if (priv->qos_data.qos_cap.q_AP.queue_request &&
-	    !priv->qos_data.qos_cap.q_AP.txop_request)
-		priv->qos_data.def_qos_parm.qos_flags |=
-			QOS_PARAM_FLG_TXOP_TYPE_MSK;
-	if (priv->qos_data.qos_active)
-		priv->qos_data.def_qos_parm.qos_flags |=
-			QOS_PARAM_FLG_UPDATE_EDCA_MSK;
-
-	if (priv->current_ht_config.is_ht)
-		priv->qos_data.def_qos_parm.qos_flags |= QOS_PARAM_FLG_TGN_MSK;
-
-	if (force || iwl_is_associated(priv)) {
-		IWL_DEBUG_QOS("send QoS cmd with Qos active=%d FLAGS=0x%X\n",
-				priv->qos_data.qos_active,
-				priv->qos_data.def_qos_parm.qos_flags);
-
-		iwl_send_cmd_pdu_async(priv, REPLY_QOS_PARAM,
-				       sizeof(struct iwl_qosparam_cmd),
-				       &priv->qos_data.def_qos_parm, NULL);
-	}
-}
-
-#define MAX_UCODE_BEACON_INTERVAL	4096
-#define INTEL_CONN_LISTEN_INTERVAL	__constant_cpu_to_le16(0xA)
-
-static __le16 iwl4965_adjust_beacon_interval(u16 beacon_val)
-{
-	u16 new_val = 0;
-	u16 beacon_factor = 0;
-
-	beacon_factor =
-	    (beacon_val + MAX_UCODE_BEACON_INTERVAL)
-		/ MAX_UCODE_BEACON_INTERVAL;
-	new_val = beacon_val / beacon_factor;
-
-	return cpu_to_le16(new_val);
-}
-
-static void iwl4965_setup_rxon_timing(struct iwl_priv *priv)
-{
-	u64 interval_tm_unit;
-	u64 tsf, result;
-	unsigned long flags;
-	struct ieee80211_conf *conf = NULL;
-	u16 beacon_int = 0;
-
-	conf = ieee80211_get_hw_conf(priv->hw);
-
-	spin_lock_irqsave(&priv->lock, flags);
-	priv->rxon_timing.timestamp.dw[1] = cpu_to_le32(priv->timestamp >> 32);
-	priv->rxon_timing.timestamp.dw[0] =
-				cpu_to_le32(priv->timestamp & 0xFFFFFFFF);
-
-	priv->rxon_timing.listen_interval = INTEL_CONN_LISTEN_INTERVAL;
-
-	tsf = priv->timestamp;
-
-	beacon_int = priv->beacon_int;
-	spin_unlock_irqrestore(&priv->lock, flags);
-
-	if (priv->iw_mode == IEEE80211_IF_TYPE_STA) {
-		if (beacon_int == 0) {
-			priv->rxon_timing.beacon_interval = cpu_to_le16(100);
-			priv->rxon_timing.beacon_init_val = cpu_to_le32(102400);
-		} else {
-			priv->rxon_timing.beacon_interval =
-				cpu_to_le16(beacon_int);
-			priv->rxon_timing.beacon_interval =
-			    iwl4965_adjust_beacon_interval(
-				le16_to_cpu(priv->rxon_timing.beacon_interval));
-		}
-
-		priv->rxon_timing.atim_window = 0;
-	} else {
-		priv->rxon_timing.beacon_interval =
-			iwl4965_adjust_beacon_interval(conf->beacon_int);
-		/* TODO: we need to get atim_window from upper stack
-		 * for now we set to 0 */
-		priv->rxon_timing.atim_window = 0;
-	}
-
-	interval_tm_unit =
-		(le16_to_cpu(priv->rxon_timing.beacon_interval) * 1024);
-	result = do_div(tsf, interval_tm_unit);
-	priv->rxon_timing.beacon_init_val =
-	    cpu_to_le32((u32) ((u64) interval_tm_unit - result));
-
-	IWL_DEBUG_ASSOC
-	    ("beacon interval %d beacon timer %d beacon tim %d\n",
-		le16_to_cpu(priv->rxon_timing.beacon_interval),
-		le32_to_cpu(priv->rxon_timing.beacon_init_val),
-		le16_to_cpu(priv->rxon_timing.atim_window));
-}
-
-static void iwl_set_flags_for_band(struct iwl_priv *priv,
-				   enum ieee80211_band band)
-{
-	if (band == IEEE80211_BAND_5GHZ) {
-		priv->staging_rxon.flags &=
-		    ~(RXON_FLG_BAND_24G_MSK | RXON_FLG_AUTO_DETECT_MSK
-		      | RXON_FLG_CCK_MSK);
-		priv->staging_rxon.flags |= RXON_FLG_SHORT_SLOT_MSK;
-	} else {
-		/* Copied from iwl4965_post_associate() */
-		if (priv->assoc_capability & WLAN_CAPABILITY_SHORT_SLOT_TIME)
-			priv->staging_rxon.flags |= RXON_FLG_SHORT_SLOT_MSK;
-		else
-			priv->staging_rxon.flags &= ~RXON_FLG_SHORT_SLOT_MSK;
-
-		if (priv->iw_mode == IEEE80211_IF_TYPE_IBSS)
-			priv->staging_rxon.flags &= ~RXON_FLG_SHORT_SLOT_MSK;
-
-		priv->staging_rxon.flags |= RXON_FLG_BAND_24G_MSK;
-		priv->staging_rxon.flags |= RXON_FLG_AUTO_DETECT_MSK;
-		priv->staging_rxon.flags &= ~RXON_FLG_CCK_MSK;
-	}
-}
-
-/*
- * initialize rxon structure with default values from eeprom
- */
-static void iwl4965_connection_init_rx_config(struct iwl_priv *priv)
-{
-	const struct iwl_channel_info *ch_info;
-
-	memset(&priv->staging_rxon, 0, sizeof(priv->staging_rxon));
-
-	switch (priv->iw_mode) {
-	case IEEE80211_IF_TYPE_AP:
-		priv->staging_rxon.dev_type = RXON_DEV_TYPE_AP;
-		break;
-
-	case IEEE80211_IF_TYPE_STA:
-		priv->staging_rxon.dev_type = RXON_DEV_TYPE_ESS;
-		priv->staging_rxon.filter_flags = RXON_FILTER_ACCEPT_GRP_MSK;
-		break;
-
-	case IEEE80211_IF_TYPE_IBSS:
-		priv->staging_rxon.dev_type = RXON_DEV_TYPE_IBSS;
-		priv->staging_rxon.flags = RXON_FLG_SHORT_PREAMBLE_MSK;
-		priv->staging_rxon.filter_flags = RXON_FILTER_BCON_AWARE_MSK |
-						  RXON_FILTER_ACCEPT_GRP_MSK;
-		break;
-
-	case IEEE80211_IF_TYPE_MNTR:
-		priv->staging_rxon.dev_type = RXON_DEV_TYPE_SNIFFER;
-		priv->staging_rxon.filter_flags = RXON_FILTER_PROMISC_MSK |
-		    RXON_FILTER_CTL2HOST_MSK | RXON_FILTER_ACCEPT_GRP_MSK;
-		break;
-	default:
-		IWL_ERROR("Unsupported interface type %d\n", priv->iw_mode);
-		break;
-	}
-
-#if 0
-	/* TODO:  Figure out when short_preamble would be set and cache from
-	 * that */
-	if (!hw_to_local(priv->hw)->short_preamble)
-		priv->staging_rxon.flags &= ~RXON_FLG_SHORT_PREAMBLE_MSK;
-	else
-		priv->staging_rxon.flags |= RXON_FLG_SHORT_PREAMBLE_MSK;
-#endif
-
-	ch_info = iwl_get_channel_info(priv, priv->band,
-				       le16_to_cpu(priv->active_rxon.channel));
-
-	if (!ch_info)
-		ch_info = &priv->channel_info[0];
-
-	/*
-	 * in some case A channels are all non IBSS
-	 * in this case force B/G channel
-	 */
-	if ((priv->iw_mode == IEEE80211_IF_TYPE_IBSS) &&
-	    !(is_channel_ibss(ch_info)))
-		ch_info = &priv->channel_info[0];
-
-	priv->staging_rxon.channel = cpu_to_le16(ch_info->channel);
-	priv->band = ch_info->band;
-
-	iwl_set_flags_for_band(priv, priv->band);
-
-	priv->staging_rxon.ofdm_basic_rates =
-	    (IWL_OFDM_RATES_MASK >> IWL_FIRST_OFDM_RATE) & 0xFF;
-	priv->staging_rxon.cck_basic_rates =
-	    (IWL_CCK_RATES_MASK >> IWL_FIRST_CCK_RATE) & 0xF;
-
-	priv->staging_rxon.flags &= ~(RXON_FLG_CHANNEL_MODE_MIXED_MSK |
-					RXON_FLG_CHANNEL_MODE_PURE_40_MSK);
-	memcpy(priv->staging_rxon.node_addr, priv->mac_addr, ETH_ALEN);
-	memcpy(priv->staging_rxon.wlap_bssid_addr, priv->mac_addr, ETH_ALEN);
-	priv->staging_rxon.ofdm_ht_single_stream_basic_rates = 0xff;
-	priv->staging_rxon.ofdm_ht_dual_stream_basic_rates = 0xff;
-	iwl_set_rxon_chain(priv);
-}
-
-static int iwl4965_set_mode(struct iwl_priv *priv, int mode)
-{
-	priv->iw_mode = mode;
-
-	iwl4965_connection_init_rx_config(priv);
-	memcpy(priv->staging_rxon.node_addr, priv->mac_addr, ETH_ALEN);
-
-	iwl_clear_stations_table(priv);
-
-	/* dont commit rxon if rf-kill is on*/
-	if (!iwl_is_ready_rf(priv))
-		return -EAGAIN;
-
-	cancel_delayed_work(&priv->scan_check);
-	if (iwl_scan_cancel_timeout(priv, 100)) {
-		IWL_WARNING("Aborted scan still in progress after 100ms\n");
-		IWL_DEBUG_MAC80211("leaving - scan abort failed.\n");
-		return -EAGAIN;
-	}
-
-	iwl4965_commit_rxon(priv);
-
-	return 0;
-}
-
-static void iwl4965_set_rate(struct iwl_priv *priv)
-{
-	const struct ieee80211_supported_band *hw = NULL;
-	struct ieee80211_rate *rate;
-	int i;
-
-	hw = iwl_get_hw_mode(priv, priv->band);
-	if (!hw) {
-		IWL_ERROR("Failed to set rate: unable to get hw mode\n");
-		return;
-	}
-
-	priv->active_rate = 0;
-	priv->active_rate_basic = 0;
-
-	for (i = 0; i < hw->n_bitrates; i++) {
-		rate = &(hw->bitrates[i]);
-		if (rate->hw_value < IWL_RATE_COUNT)
-			priv->active_rate |= (1 << rate->hw_value);
-	}
-
-	IWL_DEBUG_RATE("Set active_rate = %0x, active_rate_basic = %0x\n",
-		       priv->active_rate, priv->active_rate_basic);
-
-	/*
-	 * If a basic rate is configured, then use it (adding IWL_RATE_1M_MASK)
-	 * otherwise set it to the default of all CCK rates and 6, 12, 24 for
-	 * OFDM
-	 */
-	if (priv->active_rate_basic & IWL_CCK_BASIC_RATES_MASK)
-		priv->staging_rxon.cck_basic_rates =
-		    ((priv->active_rate_basic &
-		      IWL_CCK_RATES_MASK) >> IWL_FIRST_CCK_RATE) & 0xF;
-	else
-		priv->staging_rxon.cck_basic_rates =
-		    (IWL_CCK_BASIC_RATES_MASK >> IWL_FIRST_CCK_RATE) & 0xF;
-
-	if (priv->active_rate_basic & IWL_OFDM_BASIC_RATES_MASK)
-		priv->staging_rxon.ofdm_basic_rates =
-		    ((priv->active_rate_basic &
-		      (IWL_OFDM_BASIC_RATES_MASK | IWL_RATE_6M_MASK)) >>
-		      IWL_FIRST_OFDM_RATE) & 0xFF;
-	else
-		priv->staging_rxon.ofdm_basic_rates =
-		   (IWL_OFDM_BASIC_RATES_MASK >> IWL_FIRST_OFDM_RATE) & 0xFF;
-}
-
-#ifdef CONFIG_IWL4965_SPECTRUM_MEASUREMENT
-
-#include "iwl-spectrum.h"
-
-#define BEACON_TIME_MASK_LOW	0x00FFFFFF
-#define BEACON_TIME_MASK_HIGH	0xFF000000
-#define TIME_UNIT		1024
-
-/*
- * extended beacon time format
- * time in usec will be changed into a 32-bit value in 8:24 format
- * the high 1 byte is the beacon counts
- * the lower 3 bytes is the time in usec within one beacon interval
- */
-
-static u32 iwl4965_usecs_to_beacons(u32 usec, u32 beacon_interval)
-{
-	u32 quot;
-	u32 rem;
-	u32 interval = beacon_interval * 1024;
-
-	if (!interval || !usec)
-		return 0;
-
-	quot = (usec / interval) & (BEACON_TIME_MASK_HIGH >> 24);
-	rem = (usec % interval) & BEACON_TIME_MASK_LOW;
-
-	return (quot << 24) + rem;
-}
-
-/* base is usually what we get from ucode with each received frame,
- * the same as HW timer counter counting down
- */
-
-static __le32 iwl4965_add_beacon_time(u32 base, u32 addon, u32 beacon_interval)
-{
-	u32 base_low = base & BEACON_TIME_MASK_LOW;
-	u32 addon_low = addon & BEACON_TIME_MASK_LOW;
-	u32 interval = beacon_interval * TIME_UNIT;
-	u32 res = (base & BEACON_TIME_MASK_HIGH) +
-	    (addon & BEACON_TIME_MASK_HIGH);
-
-	if (base_low > addon_low)
-		res += base_low - addon_low;
-	else if (base_low < addon_low) {
-		res += interval + base_low - addon_low;
-		res += (1 << 24);
-	} else
-		res += (1 << 24);
-
-	return cpu_to_le32(res);
-}
-
-static int iwl4965_get_measurement(struct iwl_priv *priv,
-			       struct ieee80211_measurement_params *params,
-			       u8 type)
-{
-	struct iwl4965_spectrum_cmd spectrum;
-	struct iwl_rx_packet *res;
-	struct iwl_host_cmd cmd = {
-		.id = REPLY_SPECTRUM_MEASUREMENT_CMD,
-		.data = (void *)&spectrum,
-		.meta.flags = CMD_WANT_SKB,
-	};
-	u32 add_time = le64_to_cpu(params->start_time);
-	int rc;
-	int spectrum_resp_status;
-	int duration = le16_to_cpu(params->duration);
-
-	if (iwl_is_associated(priv))
-		add_time =
-		    iwl4965_usecs_to_beacons(
-			le64_to_cpu(params->start_time) - priv->last_tsf,
-			le16_to_cpu(priv->rxon_timing.beacon_interval));
-
-	memset(&spectrum, 0, sizeof(spectrum));
-
-	spectrum.channel_count = cpu_to_le16(1);
-	spectrum.flags =
-	    RXON_FLG_TSF2HOST_MSK | RXON_FLG_ANT_A_MSK | RXON_FLG_DIS_DIV_MSK;
-	spectrum.filter_flags = MEASUREMENT_FILTER_FLAG;
-	cmd.len = sizeof(spectrum);
-	spectrum.len = cpu_to_le16(cmd.len - sizeof(spectrum.len));
-
-	if (iwl_is_associated(priv))
-		spectrum.start_time =
-		    iwl4965_add_beacon_time(priv->last_beacon_time,
-				add_time,
-				le16_to_cpu(priv->rxon_timing.beacon_interval));
-	else
-		spectrum.start_time = 0;
-
-	spectrum.channels[0].duration = cpu_to_le32(duration * TIME_UNIT);
-	spectrum.channels[0].channel = params->channel;
-	spectrum.channels[0].type = type;
-	if (priv->active_rxon.flags & RXON_FLG_BAND_24G_MSK)
-		spectrum.flags |= RXON_FLG_BAND_24G_MSK |
-		    RXON_FLG_AUTO_DETECT_MSK | RXON_FLG_TGG_PROTECT_MSK;
-
-	rc = iwl_send_cmd_sync(priv, &cmd);
-	if (rc)
-		return rc;
-
-	res = (struct iwl_rx_packet *)cmd.meta.u.skb->data;
-	if (res->hdr.flags & IWL_CMD_FAILED_MSK) {
-		IWL_ERROR("Bad return from REPLY_RX_ON_ASSOC command\n");
-		rc = -EIO;
-	}
-
-	spectrum_resp_status = le16_to_cpu(res->u.spectrum.status);
-	switch (spectrum_resp_status) {
-	case 0:		/* Command will be handled */
-		if (res->u.spectrum.id != 0xff) {
-			IWL_DEBUG_INFO
-			    ("Replaced existing measurement: %d\n",
-			     res->u.spectrum.id);
-			priv->measurement_status &= ~MEASUREMENT_READY;
-		}
-		priv->measurement_status |= MEASUREMENT_ACTIVE;
-		rc = 0;
-		break;
-
-	case 1:		/* Command will not be handled */
-		rc = -EAGAIN;
-		break;
-	}
-
-	dev_kfree_skb_any(cmd.meta.u.skb);
-
-	return rc;
-}
-#endif
-
-/******************************************************************************
- *
- * Generic RX handler implementations
- *
- ******************************************************************************/
-static void iwl_rx_reply_alive(struct iwl_priv *priv,
-				struct iwl_rx_mem_buffer *rxb)
-{
-	struct iwl_rx_packet *pkt = (struct iwl_rx_packet *)rxb->skb->data;
-	struct iwl_alive_resp *palive;
-	struct delayed_work *pwork;
-
-	palive = &pkt->u.alive_frame;
-
-	IWL_DEBUG_INFO("Alive ucode status 0x%08X revision "
-		       "0x%01X 0x%01X\n",
-		       palive->is_valid, palive->ver_type,
-		       palive->ver_subtype);
-
-	if (palive->ver_subtype == INITIALIZE_SUBTYPE) {
-		IWL_DEBUG_INFO("Initialization Alive received.\n");
-		memcpy(&priv->card_alive_init,
-		       &pkt->u.alive_frame,
-		       sizeof(struct iwl_init_alive_resp));
-		pwork = &priv->init_alive_start;
-	} else {
-		IWL_DEBUG_INFO("Runtime Alive received.\n");
-		memcpy(&priv->card_alive, &pkt->u.alive_frame,
-		       sizeof(struct iwl_alive_resp));
-		pwork = &priv->alive_start;
-	}
-
-	/* We delay the ALIVE response by 5ms to
-	 * give the HW RF Kill time to activate... */
-	if (palive->is_valid == UCODE_VALID_OK)
-		queue_delayed_work(priv->workqueue, pwork,
-				   msecs_to_jiffies(5));
-	else
-		IWL_WARNING("uCode did not respond OK.\n");
-}
-
-static void iwl4965_rx_reply_error(struct iwl_priv *priv,
-				   struct iwl_rx_mem_buffer *rxb)
-{
-	struct iwl_rx_packet *pkt = (struct iwl_rx_packet *)rxb->skb->data;
-
-	IWL_ERROR("Error Reply type 0x%08X cmd %s (0x%02X) "
-		"seq 0x%04X ser 0x%08X\n",
-		le32_to_cpu(pkt->u.err_resp.error_type),
-		get_cmd_string(pkt->u.err_resp.cmd_id),
-		pkt->u.err_resp.cmd_id,
-		le16_to_cpu(pkt->u.err_resp.bad_cmd_seq_num),
-		le32_to_cpu(pkt->u.err_resp.error_info));
-}
-
-#define TX_STATUS_ENTRY(x) case TX_STATUS_FAIL_ ## x: return #x
-
-static void iwl4965_rx_csa(struct iwl_priv *priv, struct iwl_rx_mem_buffer *rxb)
-{
-	struct iwl_rx_packet *pkt = (struct iwl_rx_packet *)rxb->skb->data;
-	struct iwl_rxon_cmd *rxon = (void *)&priv->active_rxon;
-	struct iwl4965_csa_notification *csa = &(pkt->u.csa_notif);
-	IWL_DEBUG_11H("CSA notif: channel %d, status %d\n",
-		      le16_to_cpu(csa->channel), le32_to_cpu(csa->status));
-	rxon->channel = csa->channel;
-	priv->staging_rxon.channel = csa->channel;
-}
-
-static void iwl4965_rx_spectrum_measure_notif(struct iwl_priv *priv,
-					  struct iwl_rx_mem_buffer *rxb)
-{
-#ifdef CONFIG_IWL4965_SPECTRUM_MEASUREMENT
-	struct iwl_rx_packet *pkt = (struct iwl_rx_packet *)rxb->skb->data;
-	struct iwl4965_spectrum_notification *report = &(pkt->u.spectrum_notif);
-
-	if (!report->state) {
-		IWL_DEBUG(IWL_DL_11H,
-			"Spectrum Measure Notification: Start\n");
-		return;
-	}
-
-	memcpy(&priv->measure_report, report, sizeof(*report));
-	priv->measurement_status |= MEASUREMENT_READY;
-#endif
-}
-
-static void iwl4965_rx_pm_sleep_notif(struct iwl_priv *priv,
-				      struct iwl_rx_mem_buffer *rxb)
-{
-#ifdef CONFIG_IWLWIFI_DEBUG
-	struct iwl_rx_packet *pkt = (struct iwl_rx_packet *)rxb->skb->data;
-	struct iwl4965_sleep_notification *sleep = &(pkt->u.sleep_notif);
-	IWL_DEBUG_RX("sleep mode: %d, src: %d\n",
-		     sleep->pm_sleep_mode, sleep->pm_wakeup_src);
-#endif
-}
-
-static void iwl4965_rx_pm_debug_statistics_notif(struct iwl_priv *priv,
-					     struct iwl_rx_mem_buffer *rxb)
-{
-	struct iwl_rx_packet *pkt = (struct iwl_rx_packet *)rxb->skb->data;
-	IWL_DEBUG_RADIO("Dumping %d bytes of unhandled "
-			"notification for %s:\n",
-			le32_to_cpu(pkt->len), get_cmd_string(pkt->hdr.cmd));
-	iwl_print_hex_dump(priv, IWL_DL_RADIO, pkt->u.raw, le32_to_cpu(pkt->len));
-}
-
-static void iwl4965_bg_beacon_update(struct work_struct *work)
-{
-	struct iwl_priv *priv =
-		container_of(work, struct iwl_priv, beacon_update);
-	struct sk_buff *beacon;
-
-	/* Pull updated AP beacon from mac80211. will fail if not in AP mode */
-	beacon = ieee80211_beacon_get(priv->hw, priv->vif);
-
-	if (!beacon) {
-		IWL_ERROR("update beacon failed\n");
-		return;
-	}
-
-	mutex_lock(&priv->mutex);
-	/* new beacon skb is allocated every time; dispose previous.*/
-	if (priv->ibss_beacon)
-		dev_kfree_skb(priv->ibss_beacon);
-
-	priv->ibss_beacon = beacon;
-	mutex_unlock(&priv->mutex);
-
-	iwl4965_send_beacon_cmd(priv);
-}
-
-/**
- * iwl4965_bg_statistics_periodic - Timer callback to queue statistics
- *
- * This callback is provided in order to send a statistics request.
- *
- * This timer function is continually reset to execute within
- * REG_RECALIB_PERIOD seconds since the last STATISTICS_NOTIFICATION
- * was received.  We need to ensure we receive the statistics in order
- * to update the temperature used for calibrating the TXPOWER.
- */
-static void iwl4965_bg_statistics_periodic(unsigned long data)
-{
-	struct iwl_priv *priv = (struct iwl_priv *)data;
-
-	if (test_bit(STATUS_EXIT_PENDING, &priv->status))
-		return;
-
-	iwl_send_statistics_request(priv, CMD_ASYNC);
-}
-
-static void iwl4965_rx_beacon_notif(struct iwl_priv *priv,
-				struct iwl_rx_mem_buffer *rxb)
-{
-#ifdef CONFIG_IWLWIFI_DEBUG
-	struct iwl_rx_packet *pkt = (struct iwl_rx_packet *)rxb->skb->data;
-	struct iwl4965_beacon_notif *beacon = &(pkt->u.beacon_status);
-	u8 rate = iwl_hw_get_rate(beacon->beacon_notify_hdr.rate_n_flags);
-
-	IWL_DEBUG_RX("beacon status %x retries %d iss %d "
-		"tsf %d %d rate %d\n",
-		le32_to_cpu(beacon->beacon_notify_hdr.u.status) & TX_STATUS_MSK,
-		beacon->beacon_notify_hdr.failure_frame,
-		le32_to_cpu(beacon->ibss_mgr_status),
-		le32_to_cpu(beacon->high_tsf),
-		le32_to_cpu(beacon->low_tsf), rate);
-#endif
-
-	if ((priv->iw_mode == IEEE80211_IF_TYPE_AP) &&
-	    (!test_bit(STATUS_EXIT_PENDING, &priv->status)))
-		queue_work(priv->workqueue, &priv->beacon_update);
-}
-
-/* Handle notification from uCode that card's power state is changing
- * due to software, hardware, or critical temperature RFKILL */
-static void iwl4965_rx_card_state_notif(struct iwl_priv *priv,
-				    struct iwl_rx_mem_buffer *rxb)
-{
-	struct iwl_rx_packet *pkt = (struct iwl_rx_packet *)rxb->skb->data;
-	u32 flags = le32_to_cpu(pkt->u.card_state_notif.flags);
-	unsigned long status = priv->status;
-
-	IWL_DEBUG_RF_KILL("Card state received: HW:%s SW:%s\n",
-			  (flags & HW_CARD_DISABLED) ? "Kill" : "On",
-			  (flags & SW_CARD_DISABLED) ? "Kill" : "On");
-
-	if (flags & (SW_CARD_DISABLED | HW_CARD_DISABLED |
-		     RF_CARD_DISABLED)) {
-
-		iwl_write32(priv, CSR_UCODE_DRV_GP1_SET,
-			    CSR_UCODE_DRV_GP1_BIT_CMD_BLOCKED);
-
-		if (!iwl_grab_nic_access(priv)) {
-			iwl_write_direct32(
-				priv, HBUS_TARG_MBX_C,
-				HBUS_TARG_MBX_C_REG_BIT_CMD_BLOCKED);
-
-			iwl_release_nic_access(priv);
-		}
-
-		if (!(flags & RXON_CARD_DISABLED)) {
-			iwl_write32(priv, CSR_UCODE_DRV_GP1_CLR,
-				    CSR_UCODE_DRV_GP1_BIT_CMD_BLOCKED);
-			if (!iwl_grab_nic_access(priv)) {
-				iwl_write_direct32(
-					priv, HBUS_TARG_MBX_C,
-					HBUS_TARG_MBX_C_REG_BIT_CMD_BLOCKED);
-
-				iwl_release_nic_access(priv);
-			}
-		}
-
-		if (flags & RF_CARD_DISABLED) {
-			iwl_write32(priv, CSR_UCODE_DRV_GP1_SET,
-				    CSR_UCODE_DRV_GP1_REG_BIT_CT_KILL_EXIT);
-			iwl_read32(priv, CSR_UCODE_DRV_GP1);
-			if (!iwl_grab_nic_access(priv))
-				iwl_release_nic_access(priv);
-		}
-	}
-
-	if (flags & HW_CARD_DISABLED)
-		set_bit(STATUS_RF_KILL_HW, &priv->status);
-	else
-		clear_bit(STATUS_RF_KILL_HW, &priv->status);
-
-
-	if (flags & SW_CARD_DISABLED)
-		set_bit(STATUS_RF_KILL_SW, &priv->status);
-	else
-		clear_bit(STATUS_RF_KILL_SW, &priv->status);
-
-	if (!(flags & RXON_CARD_DISABLED))
-		iwl_scan_cancel(priv);
-
-	if ((test_bit(STATUS_RF_KILL_HW, &status) !=
-	     test_bit(STATUS_RF_KILL_HW, &priv->status)) ||
-	    (test_bit(STATUS_RF_KILL_SW, &status) !=
-	     test_bit(STATUS_RF_KILL_SW, &priv->status)))
-		queue_work(priv->workqueue, &priv->rf_kill);
-	else
-		wake_up_interruptible(&priv->wait_command_queue);
-}
-
-/**
- * iwl4965_setup_rx_handlers - Initialize Rx handler callbacks
- *
- * Setup the RX handlers for each of the reply types sent from the uCode
- * to the host.
- *
- * This function chains into the hardware specific files for them to setup
- * any hardware specific handlers as well.
- */
-static void iwl_setup_rx_handlers(struct iwl_priv *priv)
-{
-	priv->rx_handlers[REPLY_ALIVE] = iwl_rx_reply_alive;
-	priv->rx_handlers[REPLY_ERROR] = iwl4965_rx_reply_error;
-	priv->rx_handlers[CHANNEL_SWITCH_NOTIFICATION] = iwl4965_rx_csa;
-	priv->rx_handlers[SPECTRUM_MEASURE_NOTIFICATION] =
-	    iwl4965_rx_spectrum_measure_notif;
-	priv->rx_handlers[PM_SLEEP_NOTIFICATION] = iwl4965_rx_pm_sleep_notif;
-	priv->rx_handlers[PM_DEBUG_STATISTIC_NOTIFIC] =
-	    iwl4965_rx_pm_debug_statistics_notif;
-	priv->rx_handlers[BEACON_NOTIFICATION] = iwl4965_rx_beacon_notif;
-
-	/*
-	 * The same handler is used for both the REPLY to a discrete
-	 * statistics request from the host as well as for the periodic
-	 * statistics notifications (after received beacons) from the uCode.
-	 */
-	priv->rx_handlers[REPLY_STATISTICS_CMD] = iwl_rx_statistics;
-	priv->rx_handlers[STATISTICS_NOTIFICATION] = iwl_rx_statistics;
-
-	iwl_setup_rx_scan_handlers(priv);
-
-	/* status change handler */
-	priv->rx_handlers[CARD_STATE_NOTIFICATION] = iwl4965_rx_card_state_notif;
-
-	priv->rx_handlers[MISSED_BEACONS_NOTIFICATION] =
-	    iwl_rx_missed_beacon_notif;
-	/* Rx handlers */
-	priv->rx_handlers[REPLY_RX_PHY_CMD] = iwl_rx_reply_rx_phy;
-	priv->rx_handlers[REPLY_RX_MPDU_CMD] = iwl_rx_reply_rx;
-	/* block ack */
-	priv->rx_handlers[REPLY_COMPRESSED_BA] = iwl_rx_reply_compressed_ba;
-	/* Set up hardware specific Rx handlers */
-	priv->cfg->ops->lib->rx_handler_setup(priv);
-}
-
-/*
- * this should be called while priv->lock is locked
-*/
-static void __iwl_rx_replenish(struct iwl_priv *priv)
-{
-	iwl_rx_allocate(priv);
-	iwl_rx_queue_restock(priv);
-}
-
-
-/**
- * iwl_rx_handle - Main entry function for receiving responses from uCode
- *
- * Uses the priv->rx_handlers callback function array to invoke
- * the appropriate handlers, including command responses,
- * frame-received notifications, and other notifications.
- */
-void iwl_rx_handle(struct iwl_priv *priv)
-{
-	struct iwl_rx_mem_buffer *rxb;
-	struct iwl_rx_packet *pkt;
-	struct iwl_rx_queue *rxq = &priv->rxq;
-	u32 r, i;
-	int reclaim;
-	unsigned long flags;
-	u8 fill_rx = 0;
-	u32 count = 8;
-
-	/* uCode's read index (stored in shared DRAM) indicates the last Rx
-	 * buffer that the driver may process (last buffer filled by ucode). */
-	r = priv->cfg->ops->lib->shared_mem_rx_idx(priv);
-	i = rxq->read;
-
-	/* Rx interrupt, but nothing sent from uCode */
-	if (i == r)
-		IWL_DEBUG(IWL_DL_RX, "r = %d, i = %d\n", r, i);
-
-	if (iwl_rx_queue_space(rxq) > (RX_QUEUE_SIZE / 2))
-		fill_rx = 1;
-
-	while (i != r) {
-		rxb = rxq->queue[i];
-
-		/* If an RXB doesn't have a Rx queue slot associated with it,
-		 * then a bug has been introduced in the queue refilling
-		 * routines -- catch it here */
-		BUG_ON(rxb == NULL);
-
-		rxq->queue[i] = NULL;
-
-		pci_dma_sync_single_for_cpu(priv->pci_dev, rxb->dma_addr,
-					    priv->hw_params.rx_buf_size,
-					    PCI_DMA_FROMDEVICE);
-		pkt = (struct iwl_rx_packet *)rxb->skb->data;
-
-		/* Reclaim a command buffer only if this packet is a response
-		 *   to a (driver-originated) command.
-		 * If the packet (e.g. Rx frame) originated from uCode,
-		 *   there is no command buffer to reclaim.
-		 * Ucode should set SEQ_RX_FRAME bit if ucode-originated,
-		 *   but apparently a few don't get set; catch them here. */
-		reclaim = !(pkt->hdr.sequence & SEQ_RX_FRAME) &&
-			(pkt->hdr.cmd != REPLY_RX_PHY_CMD) &&
-			(pkt->hdr.cmd != REPLY_RX) &&
-			(pkt->hdr.cmd != REPLY_COMPRESSED_BA) &&
-			(pkt->hdr.cmd != STATISTICS_NOTIFICATION) &&
-			(pkt->hdr.cmd != REPLY_TX);
-
-		/* Based on type of command response or notification,
-		 *   handle those that need handling via function in
-		 *   rx_handlers table.  See iwl4965_setup_rx_handlers() */
-		if (priv->rx_handlers[pkt->hdr.cmd]) {
-			IWL_DEBUG(IWL_DL_RX, "r = %d, i = %d, %s, 0x%02x\n", r,
-				i, get_cmd_string(pkt->hdr.cmd), pkt->hdr.cmd);
-			priv->rx_handlers[pkt->hdr.cmd] (priv, rxb);
-		} else {
-			/* No handling needed */
-			IWL_DEBUG(IWL_DL_RX,
-				"r %d i %d No handler needed for %s, 0x%02x\n",
-				r, i, get_cmd_string(pkt->hdr.cmd),
-				pkt->hdr.cmd);
-		}
-
-		if (reclaim) {
-			/* Invoke any callbacks, transfer the skb to caller, and
-			 * fire off the (possibly) blocking iwl_send_cmd()
-			 * as we reclaim the driver command queue */
-			if (rxb && rxb->skb)
-				iwl_tx_cmd_complete(priv, rxb);
-			else
-				IWL_WARNING("Claim null rxb?\n");
-		}
-
-		/* For now we just don't re-use anything.  We can tweak this
-		 * later to try and re-use notification packets and SKBs that
-		 * fail to Rx correctly */
-		if (rxb->skb != NULL) {
-			priv->alloc_rxb_skb--;
-			dev_kfree_skb_any(rxb->skb);
-			rxb->skb = NULL;
-		}
-
-		pci_unmap_single(priv->pci_dev, rxb->dma_addr,
-				 priv->hw_params.rx_buf_size,
-				 PCI_DMA_FROMDEVICE);
-		spin_lock_irqsave(&rxq->lock, flags);
-		list_add_tail(&rxb->list, &priv->rxq.rx_used);
-		spin_unlock_irqrestore(&rxq->lock, flags);
-		i = (i + 1) & RX_QUEUE_MASK;
-		/* If there are a lot of unused frames,
-		 * restock the Rx queue so ucode wont assert. */
-		if (fill_rx) {
-			count++;
-			if (count >= 8) {
-				priv->rxq.read = i;
-				__iwl_rx_replenish(priv);
-				count = 0;
-			}
-		}
-	}
-
-	/* Backtrack one entry */
-	priv->rxq.read = i;
-	iwl_rx_queue_restock(priv);
-}
-
-#ifdef CONFIG_IWLWIFI_DEBUG
-static void iwl4965_print_rx_config_cmd(struct iwl_priv *priv)
-{
-	struct iwl_rxon_cmd *rxon = &priv->staging_rxon;
-	DECLARE_MAC_BUF(mac);
-
-	IWL_DEBUG_RADIO("RX CONFIG:\n");
-	iwl_print_hex_dump(priv, IWL_DL_RADIO, (u8 *) rxon, sizeof(*rxon));
-	IWL_DEBUG_RADIO("u16 channel: 0x%x\n", le16_to_cpu(rxon->channel));
-	IWL_DEBUG_RADIO("u32 flags: 0x%08X\n", le32_to_cpu(rxon->flags));
-	IWL_DEBUG_RADIO("u32 filter_flags: 0x%08x\n",
-			le32_to_cpu(rxon->filter_flags));
-	IWL_DEBUG_RADIO("u8 dev_type: 0x%x\n", rxon->dev_type);
-	IWL_DEBUG_RADIO("u8 ofdm_basic_rates: 0x%02x\n",
-			rxon->ofdm_basic_rates);
-	IWL_DEBUG_RADIO("u8 cck_basic_rates: 0x%02x\n", rxon->cck_basic_rates);
-	IWL_DEBUG_RADIO("u8[6] node_addr: %s\n",
-			print_mac(mac, rxon->node_addr));
-	IWL_DEBUG_RADIO("u8[6] bssid_addr: %s\n",
-			print_mac(mac, rxon->bssid_addr));
-	IWL_DEBUG_RADIO("u16 assoc_id: 0x%x\n", le16_to_cpu(rxon->assoc_id));
-}
-#endif
-
-static void iwl4965_enable_interrupts(struct iwl_priv *priv)
-{
-	IWL_DEBUG_ISR("Enabling interrupts\n");
-	set_bit(STATUS_INT_ENABLED, &priv->status);
-	iwl_write32(priv, CSR_INT_MASK, CSR_INI_SET_MASK);
-}
-
-/* call this function to flush any scheduled tasklet */
-static inline void iwl_synchronize_irq(struct iwl_priv *priv)
-{
-	/* wait to make sure we flush pedding tasklet*/
-	synchronize_irq(priv->pci_dev->irq);
-	tasklet_kill(&priv->irq_tasklet);
-}
-
-static inline void iwl4965_disable_interrupts(struct iwl_priv *priv)
-{
-	clear_bit(STATUS_INT_ENABLED, &priv->status);
-
-	/* disable interrupts from uCode/NIC to host */
-	iwl_write32(priv, CSR_INT_MASK, 0x00000000);
-
-	/* acknowledge/clear/reset any interrupts still pending
-	 * from uCode or flow handler (Rx/Tx DMA) */
-	iwl_write32(priv, CSR_INT, 0xffffffff);
-	iwl_write32(priv, CSR_FH_INT_STATUS, 0xffffffff);
-	IWL_DEBUG_ISR("Disabled interrupts\n");
-}
-
-
-/**
- * iwl4965_irq_handle_error - called for HW or SW error interrupt from card
- */
-static void iwl4965_irq_handle_error(struct iwl_priv *priv)
-{
-	/* Set the FW error flag -- cleared on iwl4965_down */
-	set_bit(STATUS_FW_ERROR, &priv->status);
-
-	/* Cancel currently queued command. */
-	clear_bit(STATUS_HCMD_ACTIVE, &priv->status);
-
-#ifdef CONFIG_IWLWIFI_DEBUG
-	if (priv->debug_level & IWL_DL_FW_ERRORS) {
-		iwl_dump_nic_error_log(priv);
-		iwl_dump_nic_event_log(priv);
-		iwl4965_print_rx_config_cmd(priv);
-	}
-#endif
-
-	wake_up_interruptible(&priv->wait_command_queue);
-
-	/* Keep the restart process from trying to send host
-	 * commands by clearing the INIT status bit */
-	clear_bit(STATUS_READY, &priv->status);
-
-	if (!test_bit(STATUS_EXIT_PENDING, &priv->status)) {
-		IWL_DEBUG(IWL_DL_FW_ERRORS,
-			  "Restarting adapter due to uCode error.\n");
-
-		if (iwl_is_associated(priv)) {
-			memcpy(&priv->recovery_rxon, &priv->active_rxon,
-			       sizeof(priv->recovery_rxon));
-			priv->error_recovering = 1;
-		}
-		if (priv->cfg->mod_params->restart_fw)
-			queue_work(priv->workqueue, &priv->restart);
-	}
-}
-
-static void iwl4965_error_recovery(struct iwl_priv *priv)
-{
-	unsigned long flags;
-
-	memcpy(&priv->staging_rxon, &priv->recovery_rxon,
-	       sizeof(priv->staging_rxon));
-	priv->staging_rxon.filter_flags &= ~RXON_FILTER_ASSOC_MSK;
-	iwl4965_commit_rxon(priv);
-
-	iwl_rxon_add_station(priv, priv->bssid, 1);
-
-	spin_lock_irqsave(&priv->lock, flags);
-	priv->assoc_id = le16_to_cpu(priv->staging_rxon.assoc_id);
-	priv->error_recovering = 0;
-	spin_unlock_irqrestore(&priv->lock, flags);
-}
-
-static void iwl4965_irq_tasklet(struct iwl_priv *priv)
-{
-	u32 inta, handled = 0;
-	u32 inta_fh;
-	unsigned long flags;
-#ifdef CONFIG_IWLWIFI_DEBUG
-	u32 inta_mask;
-#endif
-
-	spin_lock_irqsave(&priv->lock, flags);
-
-	/* Ack/clear/reset pending uCode interrupts.
-	 * Note:  Some bits in CSR_INT are "OR" of bits in CSR_FH_INT_STATUS,
-	 *  and will clear only when CSR_FH_INT_STATUS gets cleared. */
-	inta = iwl_read32(priv, CSR_INT);
-	iwl_write32(priv, CSR_INT, inta);
-
-	/* Ack/clear/reset pending flow-handler (DMA) interrupts.
-	 * Any new interrupts that happen after this, either while we're
-	 * in this tasklet, or later, will show up in next ISR/tasklet. */
-	inta_fh = iwl_read32(priv, CSR_FH_INT_STATUS);
-	iwl_write32(priv, CSR_FH_INT_STATUS, inta_fh);
-
-#ifdef CONFIG_IWLWIFI_DEBUG
-	if (priv->debug_level & IWL_DL_ISR) {
-		/* just for debug */
-		inta_mask = iwl_read32(priv, CSR_INT_MASK);
-		IWL_DEBUG_ISR("inta 0x%08x, enabled 0x%08x, fh 0x%08x\n",
-			      inta, inta_mask, inta_fh);
-	}
-#endif
-
-	/* Since CSR_INT and CSR_FH_INT_STATUS reads and clears are not
-	 * atomic, make sure that inta covers all the interrupts that
-	 * we've discovered, even if FH interrupt came in just after
-	 * reading CSR_INT. */
-	if (inta_fh & CSR49_FH_INT_RX_MASK)
-		inta |= CSR_INT_BIT_FH_RX;
-	if (inta_fh & CSR49_FH_INT_TX_MASK)
-		inta |= CSR_INT_BIT_FH_TX;
-
-	/* Now service all interrupt bits discovered above. */
-	if (inta & CSR_INT_BIT_HW_ERR) {
-		IWL_ERROR("Microcode HW error detected.  Restarting.\n");
-
-		/* Tell the device to stop sending interrupts */
-		iwl4965_disable_interrupts(priv);
-
-		iwl4965_irq_handle_error(priv);
-
-		handled |= CSR_INT_BIT_HW_ERR;
-
-		spin_unlock_irqrestore(&priv->lock, flags);
-
-		return;
-	}
-
-#ifdef CONFIG_IWLWIFI_DEBUG
-	if (priv->debug_level & (IWL_DL_ISR)) {
-		/* NIC fires this, but we don't use it, redundant with WAKEUP */
-		if (inta & CSR_INT_BIT_SCD)
-			IWL_DEBUG_ISR("Scheduler finished to transmit "
-				      "the frame/frames.\n");
-
-		/* Alive notification via Rx interrupt will do the real work */
-		if (inta & CSR_INT_BIT_ALIVE)
-			IWL_DEBUG_ISR("Alive interrupt\n");
-	}
-#endif
-	/* Safely ignore these bits for debug checks below */
-	inta &= ~(CSR_INT_BIT_SCD | CSR_INT_BIT_ALIVE);
-
-	/* HW RF KILL switch toggled */
-	if (inta & CSR_INT_BIT_RF_KILL) {
-		int hw_rf_kill = 0;
-		if (!(iwl_read32(priv, CSR_GP_CNTRL) &
-				CSR_GP_CNTRL_REG_FLAG_HW_RF_KILL_SW))
-			hw_rf_kill = 1;
-
-		IWL_DEBUG(IWL_DL_RF_KILL, "RF_KILL bit toggled to %s.\n",
-				hw_rf_kill ? "disable radio":"enable radio");
-
-		/* driver only loads ucode once setting the interface up.
-		 * the driver as well won't allow loading if RFKILL is set
-		 * therefore no need to restart the driver from this handler
-		 */
-		if (!hw_rf_kill && !test_bit(STATUS_ALIVE, &priv->status))
-			clear_bit(STATUS_RF_KILL_HW, &priv->status);
-
-		handled |= CSR_INT_BIT_RF_KILL;
-	}
-
-	/* Chip got too hot and stopped itself */
-	if (inta & CSR_INT_BIT_CT_KILL) {
-		IWL_ERROR("Microcode CT kill error detected.\n");
-		handled |= CSR_INT_BIT_CT_KILL;
-	}
-
-	/* Error detected by uCode */
-	if (inta & CSR_INT_BIT_SW_ERR) {
-		IWL_ERROR("Microcode SW error detected.  Restarting 0x%X.\n",
-			  inta);
-		iwl4965_irq_handle_error(priv);
-		handled |= CSR_INT_BIT_SW_ERR;
-	}
-
-	/* uCode wakes up after power-down sleep */
-	if (inta & CSR_INT_BIT_WAKEUP) {
-		IWL_DEBUG_ISR("Wakeup interrupt\n");
-		iwl_rx_queue_update_write_ptr(priv, &priv->rxq);
-		iwl_txq_update_write_ptr(priv, &priv->txq[0]);
-		iwl_txq_update_write_ptr(priv, &priv->txq[1]);
-		iwl_txq_update_write_ptr(priv, &priv->txq[2]);
-		iwl_txq_update_write_ptr(priv, &priv->txq[3]);
-		iwl_txq_update_write_ptr(priv, &priv->txq[4]);
-		iwl_txq_update_write_ptr(priv, &priv->txq[5]);
-
-		handled |= CSR_INT_BIT_WAKEUP;
-	}
-
-	/* All uCode command responses, including Tx command responses,
-	 * Rx "responses" (frame-received notification), and other
-	 * notifications from uCode come through here*/
-	if (inta & (CSR_INT_BIT_FH_RX | CSR_INT_BIT_SW_RX)) {
-		iwl_rx_handle(priv);
-		handled |= (CSR_INT_BIT_FH_RX | CSR_INT_BIT_SW_RX);
-	}
-
-	if (inta & CSR_INT_BIT_FH_TX) {
-		IWL_DEBUG_ISR("Tx interrupt\n");
-		handled |= CSR_INT_BIT_FH_TX;
-		/* FH finished to write, send event */
-		priv->ucode_write_complete = 1;
-		wake_up_interruptible(&priv->wait_command_queue);
-	}
-
-	if (inta & ~handled)
-		IWL_ERROR("Unhandled INTA bits 0x%08x\n", inta & ~handled);
-
-	if (inta & ~CSR_INI_SET_MASK) {
-		IWL_WARNING("Disabled INTA bits 0x%08x were pending\n",
-			 inta & ~CSR_INI_SET_MASK);
-		IWL_WARNING("   with FH_INT = 0x%08x\n", inta_fh);
-	}
-
-	/* Re-enable all interrupts */
-	/* only Re-enable if diabled by irq */
-	if (test_bit(STATUS_INT_ENABLED, &priv->status))
-		iwl4965_enable_interrupts(priv);
-
-#ifdef CONFIG_IWLWIFI_DEBUG
-	if (priv->debug_level & (IWL_DL_ISR)) {
-		inta = iwl_read32(priv, CSR_INT);
-		inta_mask = iwl_read32(priv, CSR_INT_MASK);
-		inta_fh = iwl_read32(priv, CSR_FH_INT_STATUS);
-		IWL_DEBUG_ISR("End inta 0x%08x, enabled 0x%08x, fh 0x%08x, "
-			"flags 0x%08lx\n", inta, inta_mask, inta_fh, flags);
-	}
-#endif
-	spin_unlock_irqrestore(&priv->lock, flags);
-}
-
-static irqreturn_t iwl4965_isr(int irq, void *data)
-{
-	struct iwl_priv *priv = data;
-	u32 inta, inta_mask;
-	u32 inta_fh;
-	if (!priv)
-		return IRQ_NONE;
-
-	spin_lock(&priv->lock);
-
-	/* Disable (but don't clear!) interrupts here to avoid
-	 *    back-to-back ISRs and sporadic interrupts from our NIC.
-	 * If we have something to service, the tasklet will re-enable ints.
-	 * If we *don't* have something, we'll re-enable before leaving here. */
-	inta_mask = iwl_read32(priv, CSR_INT_MASK);  /* just for debug */
-	iwl_write32(priv, CSR_INT_MASK, 0x00000000);
-
-	/* Discover which interrupts are active/pending */
-	inta = iwl_read32(priv, CSR_INT);
-	inta_fh = iwl_read32(priv, CSR_FH_INT_STATUS);
-
-	/* Ignore interrupt if there's nothing in NIC to service.
-	 * This may be due to IRQ shared with another device,
-	 * or due to sporadic interrupts thrown from our NIC. */
-	if (!inta && !inta_fh) {
-		IWL_DEBUG_ISR("Ignore interrupt, inta == 0, inta_fh == 0\n");
-		goto none;
-	}
-
-	if ((inta == 0xFFFFFFFF) || ((inta & 0xFFFFFFF0) == 0xa5a5a5a0)) {
-		/* Hardware disappeared. It might have already raised
-		 * an interrupt */
-		IWL_WARNING("HARDWARE GONE?? INTA == 0x%080x\n", inta);
-		goto unplugged;
-	}
-
-	IWL_DEBUG_ISR("ISR inta 0x%08x, enabled 0x%08x, fh 0x%08x\n",
-		      inta, inta_mask, inta_fh);
-
-	inta &= ~CSR_INT_BIT_SCD;
-
-	/* iwl4965_irq_tasklet() will service interrupts and re-enable them */
-	if (likely(inta || inta_fh))
-		tasklet_schedule(&priv->irq_tasklet);
-
- unplugged:
-	spin_unlock(&priv->lock);
-	return IRQ_HANDLED;
-
- none:
-	/* re-enable interrupts here since we don't have anything to service. */
-	/* only Re-enable if diabled by irq */
-	if (test_bit(STATUS_INT_ENABLED, &priv->status))
-		iwl4965_enable_interrupts(priv);
-	spin_unlock(&priv->lock);
-	return IRQ_NONE;
-}
-
-/******************************************************************************
- *
- * uCode download functions
- *
- ******************************************************************************/
-
-static void iwl4965_dealloc_ucode_pci(struct iwl_priv *priv)
-{
-	iwl_free_fw_desc(priv->pci_dev, &priv->ucode_code);
-	iwl_free_fw_desc(priv->pci_dev, &priv->ucode_data);
-	iwl_free_fw_desc(priv->pci_dev, &priv->ucode_data_backup);
-	iwl_free_fw_desc(priv->pci_dev, &priv->ucode_init);
-	iwl_free_fw_desc(priv->pci_dev, &priv->ucode_init_data);
-	iwl_free_fw_desc(priv->pci_dev, &priv->ucode_boot);
-}
-
-static void iwl4965_nic_start(struct iwl_priv *priv)
-{
-	/* Remove all resets to allow NIC to operate */
-	iwl_write32(priv, CSR_RESET, 0);
-}
-
-
-/**
- * iwl4965_read_ucode - Read uCode images from disk file.
- *
- * Copy into buffers for card to fetch via bus-mastering
- */
-static int iwl4965_read_ucode(struct iwl_priv *priv)
-{
-	struct iwl_ucode *ucode;
-	int ret;
-	const struct firmware *ucode_raw;
-	const char *name = priv->cfg->fw_name;
-	u8 *src;
-	size_t len;
-	u32 ver, inst_size, data_size, init_size, init_data_size, boot_size;
-
-	/* Ask kernel firmware_class module to get the boot firmware off disk.
-	 * request_firmware() is synchronous, file is in memory on return. */
-	ret = request_firmware(&ucode_raw, name, &priv->pci_dev->dev);
-	if (ret < 0) {
-		IWL_ERROR("%s firmware file req failed: Reason %d\n",
-					name, ret);
-		goto error;
-	}
-
-	IWL_DEBUG_INFO("Got firmware '%s' file (%zd bytes) from disk\n",
-		       name, ucode_raw->size);
-
-	/* Make sure that we got at least our header! */
-	if (ucode_raw->size < sizeof(*ucode)) {
-		IWL_ERROR("File size way too small!\n");
-		ret = -EINVAL;
-		goto err_release;
-	}
-
-	/* Data from ucode file:  header followed by uCode images */
-	ucode = (void *)ucode_raw->data;
-
-	ver = le32_to_cpu(ucode->ver);
-	inst_size = le32_to_cpu(ucode->inst_size);
-	data_size = le32_to_cpu(ucode->data_size);
-	init_size = le32_to_cpu(ucode->init_size);
-	init_data_size = le32_to_cpu(ucode->init_data_size);
-	boot_size = le32_to_cpu(ucode->boot_size);
-
-	IWL_DEBUG_INFO("f/w package hdr ucode version = 0x%x\n", ver);
-	IWL_DEBUG_INFO("f/w package hdr runtime inst size = %u\n",
-		       inst_size);
-	IWL_DEBUG_INFO("f/w package hdr runtime data size = %u\n",
-		       data_size);
-	IWL_DEBUG_INFO("f/w package hdr init inst size = %u\n",
-		       init_size);
-	IWL_DEBUG_INFO("f/w package hdr init data size = %u\n",
-		       init_data_size);
-	IWL_DEBUG_INFO("f/w package hdr boot inst size = %u\n",
-		       boot_size);
-
-	/* Verify size of file vs. image size info in file's header */
-	if (ucode_raw->size < sizeof(*ucode) +
-		inst_size + data_size + init_size +
-		init_data_size + boot_size) {
-
-		IWL_DEBUG_INFO("uCode file size %d too small\n",
-			       (int)ucode_raw->size);
-		ret = -EINVAL;
-		goto err_release;
-	}
-
-	/* Verify that uCode images will fit in card's SRAM */
-	if (inst_size > priv->hw_params.max_inst_size) {
-		IWL_DEBUG_INFO("uCode instr len %d too large to fit in\n",
-			       inst_size);
-		ret = -EINVAL;
-		goto err_release;
-	}
-
-	if (data_size > priv->hw_params.max_data_size) {
-		IWL_DEBUG_INFO("uCode data len %d too large to fit in\n",
-				data_size);
-		ret = -EINVAL;
-		goto err_release;
-	}
-	if (init_size > priv->hw_params.max_inst_size) {
-		IWL_DEBUG_INFO
-		    ("uCode init instr len %d too large to fit in\n",
-		      init_size);
-		ret = -EINVAL;
-		goto err_release;
-	}
-	if (init_data_size > priv->hw_params.max_data_size) {
-		IWL_DEBUG_INFO
-		    ("uCode init data len %d too large to fit in\n",
-		      init_data_size);
-		ret = -EINVAL;
-		goto err_release;
-	}
-	if (boot_size > priv->hw_params.max_bsm_size) {
-		IWL_DEBUG_INFO
-		    ("uCode boot instr len %d too large to fit in\n",
-		      boot_size);
-		ret = -EINVAL;
-		goto err_release;
-	}
-
-	/* Allocate ucode buffers for card's bus-master loading ... */
-
-	/* Runtime instructions and 2 copies of data:
-	 * 1) unmodified from disk
-	 * 2) backup cache for save/restore during power-downs */
-	priv->ucode_code.len = inst_size;
-	iwl_alloc_fw_desc(priv->pci_dev, &priv->ucode_code);
-
-	priv->ucode_data.len = data_size;
-	iwl_alloc_fw_desc(priv->pci_dev, &priv->ucode_data);
-
-	priv->ucode_data_backup.len = data_size;
-	iwl_alloc_fw_desc(priv->pci_dev, &priv->ucode_data_backup);
-
-	/* Initialization instructions and data */
-	if (init_size && init_data_size) {
-		priv->ucode_init.len = init_size;
-		iwl_alloc_fw_desc(priv->pci_dev, &priv->ucode_init);
-
-		priv->ucode_init_data.len = init_data_size;
-		iwl_alloc_fw_desc(priv->pci_dev, &priv->ucode_init_data);
-
-		if (!priv->ucode_init.v_addr || !priv->ucode_init_data.v_addr)
-			goto err_pci_alloc;
-	}
-
-	/* Bootstrap (instructions only, no data) */
-	if (boot_size) {
-		priv->ucode_boot.len = boot_size;
-		iwl_alloc_fw_desc(priv->pci_dev, &priv->ucode_boot);
-
-		if (!priv->ucode_boot.v_addr)
-			goto err_pci_alloc;
-	}
-
-	/* Copy images into buffers for card's bus-master reads ... */
-
-	/* Runtime instructions (first block of data in file) */
-	src = &ucode->data[0];
-	len = priv->ucode_code.len;
-	IWL_DEBUG_INFO("Copying (but not loading) uCode instr len %Zd\n", len);
-	memcpy(priv->ucode_code.v_addr, src, len);
-	IWL_DEBUG_INFO("uCode instr buf vaddr = 0x%p, paddr = 0x%08x\n",
-		priv->ucode_code.v_addr, (u32)priv->ucode_code.p_addr);
-
-	/* Runtime data (2nd block)
-	 * NOTE:  Copy into backup buffer will be done in iwl4965_up()  */
-	src = &ucode->data[inst_size];
-	len = priv->ucode_data.len;
-	IWL_DEBUG_INFO("Copying (but not loading) uCode data len %Zd\n", len);
-	memcpy(priv->ucode_data.v_addr, src, len);
-	memcpy(priv->ucode_data_backup.v_addr, src, len);
-
-	/* Initialization instructions (3rd block) */
-	if (init_size) {
-		src = &ucode->data[inst_size + data_size];
-		len = priv->ucode_init.len;
-		IWL_DEBUG_INFO("Copying (but not loading) init instr len %Zd\n",
-				len);
-		memcpy(priv->ucode_init.v_addr, src, len);
-	}
-
-	/* Initialization data (4th block) */
-	if (init_data_size) {
-		src = &ucode->data[inst_size + data_size + init_size];
-		len = priv->ucode_init_data.len;
-		IWL_DEBUG_INFO("Copying (but not loading) init data len %Zd\n",
-			       len);
-		memcpy(priv->ucode_init_data.v_addr, src, len);
-	}
-
-	/* Bootstrap instructions (5th block) */
-	src = &ucode->data[inst_size + data_size + init_size + init_data_size];
-	len = priv->ucode_boot.len;
-	IWL_DEBUG_INFO("Copying (but not loading) boot instr len %Zd\n", len);
-	memcpy(priv->ucode_boot.v_addr, src, len);
-
-	/* We have our copies now, allow OS release its copies */
-	release_firmware(ucode_raw);
-	return 0;
-
- err_pci_alloc:
-	IWL_ERROR("failed to allocate pci memory\n");
-	ret = -ENOMEM;
-	iwl4965_dealloc_ucode_pci(priv);
-
- err_release:
-	release_firmware(ucode_raw);
-
- error:
-	return ret;
-}
-
-/**
- * iwl_alive_start - called after REPLY_ALIVE notification received
- *                   from protocol/runtime uCode (initialization uCode's
- *                   Alive gets handled by iwl_init_alive_start()).
- */
-static void iwl_alive_start(struct iwl_priv *priv)
-{
-	int ret = 0;
-
-	IWL_DEBUG_INFO("Runtime Alive received.\n");
-
-	if (priv->card_alive.is_valid != UCODE_VALID_OK) {
-		/* We had an error bringing up the hardware, so take it
-		 * all the way back down so we can try again */
-		IWL_DEBUG_INFO("Alive failed.\n");
-		goto restart;
-	}
-
-	/* Initialize uCode has loaded Runtime uCode ... verify inst image.
-	 * This is a paranoid check, because we would not have gotten the
-	 * "runtime" alive if code weren't properly loaded.  */
-	if (iwl_verify_ucode(priv)) {
-		/* Runtime instruction load was bad;
-		 * take it all the way back down so we can try again */
-		IWL_DEBUG_INFO("Bad runtime uCode load.\n");
-		goto restart;
-	}
-
-	iwl_clear_stations_table(priv);
-	ret = priv->cfg->ops->lib->alive_notify(priv);
-	if (ret) {
-		IWL_WARNING("Could not complete ALIVE transition [ntf]: %d\n",
-			    ret);
-		goto restart;
-	}
-
-	/* After the ALIVE response, we can send host commands to 4965 uCode */
-	set_bit(STATUS_ALIVE, &priv->status);
-
-	if (iwl_is_rfkill(priv))
-		return;
-
-	ieee80211_wake_queues(priv->hw);
-
-	priv->active_rate = priv->rates_mask;
-	priv->active_rate_basic = priv->rates_mask & IWL_BASIC_RATES_MASK;
-
-	if (iwl_is_associated(priv)) {
-		struct iwl_rxon_cmd *active_rxon =
-				(struct iwl_rxon_cmd *)&priv->active_rxon;
-
-		memcpy(&priv->staging_rxon, &priv->active_rxon,
-		       sizeof(priv->staging_rxon));
-		active_rxon->filter_flags &= ~RXON_FILTER_ASSOC_MSK;
-	} else {
-		/* Initialize our rx_config data */
-		iwl4965_connection_init_rx_config(priv);
-		memcpy(priv->staging_rxon.node_addr, priv->mac_addr, ETH_ALEN);
-	}
-
-	/* Configure Bluetooth device coexistence support */
-	iwl4965_send_bt_config(priv);
-
-	iwl_reset_run_time_calib(priv);
-
-	/* Configure the adapter for unassociated operation */
-	iwl4965_commit_rxon(priv);
-
-	/* At this point, the NIC is initialized and operational */
-	iwl_rf_kill_ct_config(priv);
-
-	iwl_leds_register(priv);
-
-	IWL_DEBUG_INFO("ALIVE processing complete.\n");
-	set_bit(STATUS_READY, &priv->status);
-	wake_up_interruptible(&priv->wait_command_queue);
-
-	if (priv->error_recovering)
-		iwl4965_error_recovery(priv);
-
-	iwl_power_update_mode(priv, 1);
-	ieee80211_notify_mac(priv->hw, IEEE80211_NOTIFY_RE_ASSOC);
-
-	if (test_and_clear_bit(STATUS_MODE_PENDING, &priv->status))
-		iwl4965_set_mode(priv, priv->iw_mode);
-
-	return;
-
- restart:
-	queue_work(priv->workqueue, &priv->restart);
-}
-
-static void iwl_cancel_deferred_work(struct iwl_priv *priv);
-
-static void __iwl4965_down(struct iwl_priv *priv)
-{
-	unsigned long flags;
-	int exit_pending = test_bit(STATUS_EXIT_PENDING, &priv->status);
-
-	IWL_DEBUG_INFO(DRV_NAME " is going down\n");
-
-	if (!exit_pending)
-		set_bit(STATUS_EXIT_PENDING, &priv->status);
-
-	iwl_leds_unregister(priv);
-
-	iwl_clear_stations_table(priv);
-
-	/* Unblock any waiting calls */
-	wake_up_interruptible_all(&priv->wait_command_queue);
-
-	/* Wipe out the EXIT_PENDING status bit if we are not actually
-	 * exiting the module */
-	if (!exit_pending)
-		clear_bit(STATUS_EXIT_PENDING, &priv->status);
-
-	/* stop and reset the on-board processor */
-	iwl_write32(priv, CSR_RESET, CSR_RESET_REG_FLAG_NEVO_RESET);
-
-	/* tell the device to stop sending interrupts */
-	spin_lock_irqsave(&priv->lock, flags);
-	iwl4965_disable_interrupts(priv);
-	spin_unlock_irqrestore(&priv->lock, flags);
-	iwl_synchronize_irq(priv);
-
-	if (priv->mac80211_registered)
-		ieee80211_stop_queues(priv->hw);
-
-	/* If we have not previously called iwl4965_init() then
-	 * clear all bits but the RF Kill and SUSPEND bits and return */
-	if (!iwl_is_init(priv)) {
-		priv->status = test_bit(STATUS_RF_KILL_HW, &priv->status) <<
-					STATUS_RF_KILL_HW |
-			       test_bit(STATUS_RF_KILL_SW, &priv->status) <<
-					STATUS_RF_KILL_SW |
-			       test_bit(STATUS_GEO_CONFIGURED, &priv->status) <<
-					STATUS_GEO_CONFIGURED |
-			       test_bit(STATUS_IN_SUSPEND, &priv->status) <<
-					STATUS_IN_SUSPEND |
-			       test_bit(STATUS_EXIT_PENDING, &priv->status) <<
-					STATUS_EXIT_PENDING;
-		goto exit;
-	}
-
-	/* ...otherwise clear out all the status bits but the RF Kill and
-	 * SUSPEND bits and continue taking the NIC down. */
-	priv->status &= test_bit(STATUS_RF_KILL_HW, &priv->status) <<
-				STATUS_RF_KILL_HW |
-			test_bit(STATUS_RF_KILL_SW, &priv->status) <<
-				STATUS_RF_KILL_SW |
-			test_bit(STATUS_GEO_CONFIGURED, &priv->status) <<
-				STATUS_GEO_CONFIGURED |
-			test_bit(STATUS_IN_SUSPEND, &priv->status) <<
-				STATUS_IN_SUSPEND |
-			test_bit(STATUS_FW_ERROR, &priv->status) <<
-				STATUS_FW_ERROR |
-		       test_bit(STATUS_EXIT_PENDING, &priv->status) <<
-				STATUS_EXIT_PENDING;
-
-	spin_lock_irqsave(&priv->lock, flags);
-	iwl_clear_bit(priv, CSR_GP_CNTRL,
-			 CSR_GP_CNTRL_REG_FLAG_MAC_ACCESS_REQ);
-	spin_unlock_irqrestore(&priv->lock, flags);
-
-	iwl_txq_ctx_stop(priv);
-	iwl_rxq_stop(priv);
-
-	spin_lock_irqsave(&priv->lock, flags);
-	if (!iwl_grab_nic_access(priv)) {
-		iwl_write_prph(priv, APMG_CLK_DIS_REG,
-					 APMG_CLK_VAL_DMA_CLK_RQT);
-		iwl_release_nic_access(priv);
-	}
-	spin_unlock_irqrestore(&priv->lock, flags);
-
-	udelay(5);
-
-	/* FIXME: apm_ops.suspend(priv) */
-	priv->cfg->ops->lib->apm_ops.reset(priv);
-	priv->cfg->ops->lib->free_shared_mem(priv);
-
- exit:
-	memset(&priv->card_alive, 0, sizeof(struct iwl_alive_resp));
-
-	if (priv->ibss_beacon)
-		dev_kfree_skb(priv->ibss_beacon);
-	priv->ibss_beacon = NULL;
-
-	/* clear out any free frames */
-	iwl_clear_free_frames(priv);
-}
-
-static void iwl4965_down(struct iwl_priv *priv)
-{
-	mutex_lock(&priv->mutex);
-	__iwl4965_down(priv);
-	mutex_unlock(&priv->mutex);
-
-	iwl_cancel_deferred_work(priv);
-}
-
-#define MAX_HW_RESTARTS 5
-
-static int __iwl4965_up(struct iwl_priv *priv)
-{
-	int i;
-	int ret;
-
-	if (test_bit(STATUS_EXIT_PENDING, &priv->status)) {
-		IWL_WARNING("Exit pending; will not bring the NIC up\n");
-		return -EIO;
-	}
-
-	if (!priv->ucode_data_backup.v_addr || !priv->ucode_data.v_addr) {
-		IWL_ERROR("ucode not available for device bringup\n");
-		return -EIO;
-	}
-
-	/* If platform's RF_KILL switch is NOT set to KILL */
-	if (iwl_read32(priv, CSR_GP_CNTRL) &
-				CSR_GP_CNTRL_REG_FLAG_HW_RF_KILL_SW)
-		clear_bit(STATUS_RF_KILL_HW, &priv->status);
-	else
-		set_bit(STATUS_RF_KILL_HW, &priv->status);
-
-	if (!test_bit(STATUS_IN_SUSPEND, &priv->status) &&
-	    iwl_is_rfkill(priv)) {
-		IWL_WARNING("Radio disabled by %s RF Kill switch\n",
-		    test_bit(STATUS_RF_KILL_HW, &priv->status) ? "HW" : "SW");
-		return -ENODEV;
-	}
-
-	iwl_write32(priv, CSR_INT, 0xFFFFFFFF);
-
-	ret = priv->cfg->ops->lib->alloc_shared_mem(priv);
-	if (ret) {
-		IWL_ERROR("Unable to allocate shared memory\n");
-		return ret;
-	}
-
-	ret = iwl_hw_nic_init(priv);
-	if (ret) {
-		IWL_ERROR("Unable to init nic\n");
-		return ret;
-	}
-
-	/* make sure rfkill handshake bits are cleared */
-	iwl_write32(priv, CSR_UCODE_DRV_GP1_CLR, CSR_UCODE_SW_BIT_RFKILL);
-	iwl_write32(priv, CSR_UCODE_DRV_GP1_CLR,
-		    CSR_UCODE_DRV_GP1_BIT_CMD_BLOCKED);
-
-	/* clear (again), then enable host interrupts */
-	iwl_write32(priv, CSR_INT, 0xFFFFFFFF);
-	iwl4965_enable_interrupts(priv);
-
-	/* really make sure rfkill handshake bits are cleared */
-	iwl_write32(priv, CSR_UCODE_DRV_GP1_CLR, CSR_UCODE_SW_BIT_RFKILL);
-	iwl_write32(priv, CSR_UCODE_DRV_GP1_CLR, CSR_UCODE_SW_BIT_RFKILL);
-
-	/* Copy original ucode data image from disk into backup cache.
-	 * This will be used to initialize the on-board processor's
-	 * data SRAM for a clean start when the runtime program first loads. */
-	memcpy(priv->ucode_data_backup.v_addr, priv->ucode_data.v_addr,
-	       priv->ucode_data.len);
-
-	/* We return success when we resume from suspend and rf_kill is on. */
-	if (test_bit(STATUS_RF_KILL_HW, &priv->status) ||
-	    test_bit(STATUS_RF_KILL_SW, &priv->status))
-		return 0;
-
-	for (i = 0; i < MAX_HW_RESTARTS; i++) {
-
-		iwl_clear_stations_table(priv);
-
-		/* load bootstrap state machine,
-		 * load bootstrap program into processor's memory,
-		 * prepare to load the "initialize" uCode */
-		ret = priv->cfg->ops->lib->load_ucode(priv);
-
-		if (ret) {
-			IWL_ERROR("Unable to set up bootstrap uCode: %d\n", ret);
-			continue;
-		}
-
-		/* Clear out the uCode error bit if it is set */
-		clear_bit(STATUS_FW_ERROR, &priv->status);
-
-		/* start card; "initialize" will load runtime ucode */
-		iwl4965_nic_start(priv);
-
-		IWL_DEBUG_INFO(DRV_NAME " is coming up\n");
-
-		return 0;
-	}
-
-	set_bit(STATUS_EXIT_PENDING, &priv->status);
-	__iwl4965_down(priv);
-	clear_bit(STATUS_EXIT_PENDING, &priv->status);
-
-	/* tried to restart and config the device for as long as our
-	 * patience could withstand */
-	IWL_ERROR("Unable to initialize device after %d attempts.\n", i);
-	return -EIO;
-}
-
-
-/*****************************************************************************
- *
- * Workqueue callbacks
- *
- *****************************************************************************/
-
-static void iwl_bg_init_alive_start(struct work_struct *data)
-{
-	struct iwl_priv *priv =
-	    container_of(data, struct iwl_priv, init_alive_start.work);
-
-	if (test_bit(STATUS_EXIT_PENDING, &priv->status))
-		return;
-
-	mutex_lock(&priv->mutex);
-	priv->cfg->ops->lib->init_alive_start(priv);
-	mutex_unlock(&priv->mutex);
-}
-
-static void iwl_bg_alive_start(struct work_struct *data)
-{
-	struct iwl_priv *priv =
-	    container_of(data, struct iwl_priv, alive_start.work);
-
-	if (test_bit(STATUS_EXIT_PENDING, &priv->status))
-		return;
-
-	mutex_lock(&priv->mutex);
-	iwl_alive_start(priv);
-	mutex_unlock(&priv->mutex);
-}
-
-static void iwl4965_bg_rf_kill(struct work_struct *work)
-{
-	struct iwl_priv *priv = container_of(work, struct iwl_priv, rf_kill);
-
-	wake_up_interruptible(&priv->wait_command_queue);
-
-	if (test_bit(STATUS_EXIT_PENDING, &priv->status))
-		return;
-
-	mutex_lock(&priv->mutex);
-
-	if (!iwl_is_rfkill(priv)) {
-		IWL_DEBUG(IWL_DL_RF_KILL,
-			  "HW and/or SW RF Kill no longer active, restarting "
-			  "device\n");
-		if (!test_bit(STATUS_EXIT_PENDING, &priv->status))
-			queue_work(priv->workqueue, &priv->restart);
-	} else {
-		/* make sure mac80211 stop sending Tx frame */
-		if (priv->mac80211_registered)
-			ieee80211_stop_queues(priv->hw);
-
-		if (!test_bit(STATUS_RF_KILL_HW, &priv->status))
-			IWL_DEBUG_RF_KILL("Can not turn radio back on - "
-					  "disabled by SW switch\n");
-		else
-			IWL_WARNING("Radio Frequency Kill Switch is On:\n"
-				    "Kill switch must be turned off for "
-				    "wireless networking to work.\n");
-	}
-	mutex_unlock(&priv->mutex);
-	iwl_rfkill_set_hw_state(priv);
-}
-
-static void iwl4965_bg_set_monitor(struct work_struct *work)
-{
-	struct iwl_priv *priv = container_of(work,
-				struct iwl_priv, set_monitor);
-	int ret;
-
-	IWL_DEBUG(IWL_DL_STATE, "setting monitor mode\n");
-
-	mutex_lock(&priv->mutex);
-
-	ret = iwl4965_set_mode(priv, IEEE80211_IF_TYPE_MNTR);
-
-	if (ret) {
-		if (ret == -EAGAIN)
-			IWL_DEBUG(IWL_DL_STATE, "leave - not ready\n");
-		else
-			IWL_ERROR("iwl4965_set_mode() failed ret = %d\n", ret);
-	}
-
-	mutex_unlock(&priv->mutex);
-}
-
-static void iwl_bg_run_time_calib_work(struct work_struct *work)
-{
-	struct iwl_priv *priv = container_of(work, struct iwl_priv,
-			run_time_calib_work);
-
-	mutex_lock(&priv->mutex);
-
-	if (test_bit(STATUS_EXIT_PENDING, &priv->status) ||
-	    test_bit(STATUS_SCANNING, &priv->status)) {
-		mutex_unlock(&priv->mutex);
-		return;
-	}
-
-	if (priv->start_calib) {
-		iwl_chain_noise_calibration(priv, &priv->statistics);
-
-		iwl_sensitivity_calibration(priv, &priv->statistics);
-	}
-
-	mutex_unlock(&priv->mutex);
-	return;
-}
-
-static void iwl4965_bg_up(struct work_struct *data)
-{
-	struct iwl_priv *priv = container_of(data, struct iwl_priv, up);
-
-	if (test_bit(STATUS_EXIT_PENDING, &priv->status))
-		return;
-
-	mutex_lock(&priv->mutex);
-	__iwl4965_up(priv);
-	mutex_unlock(&priv->mutex);
-	iwl_rfkill_set_hw_state(priv);
-}
-
-static void iwl4965_bg_restart(struct work_struct *data)
-{
-	struct iwl_priv *priv = container_of(data, struct iwl_priv, restart);
-
-	if (test_bit(STATUS_EXIT_PENDING, &priv->status))
-		return;
-
-	iwl4965_down(priv);
-	queue_work(priv->workqueue, &priv->up);
-}
-
-static void iwl4965_bg_rx_replenish(struct work_struct *data)
-{
-	struct iwl_priv *priv =
-	    container_of(data, struct iwl_priv, rx_replenish);
-
-	if (test_bit(STATUS_EXIT_PENDING, &priv->status))
-		return;
-
-	mutex_lock(&priv->mutex);
-	iwl_rx_replenish(priv);
-	mutex_unlock(&priv->mutex);
-}
-
-#define IWL_DELAY_NEXT_SCAN (HZ*2)
-
-static void iwl4965_post_associate(struct iwl_priv *priv)
-{
-	struct ieee80211_conf *conf = NULL;
-	int ret = 0;
-	DECLARE_MAC_BUF(mac);
-	unsigned long flags;
-
-	if (priv->iw_mode == IEEE80211_IF_TYPE_AP) {
-		IWL_ERROR("%s Should not be called in AP mode\n", __FUNCTION__);
-		return;
-	}
-
-	IWL_DEBUG_ASSOC("Associated as %d to: %s\n",
-			priv->assoc_id,
-			print_mac(mac, priv->active_rxon.bssid_addr));
-
-
-	if (test_bit(STATUS_EXIT_PENDING, &priv->status))
-		return;
-
-
-	if (!priv->vif || !priv->is_open)
-		return;
-
-	iwl_scan_cancel_timeout(priv, 200);
-
-	conf = ieee80211_get_hw_conf(priv->hw);
-
-	priv->staging_rxon.filter_flags &= ~RXON_FILTER_ASSOC_MSK;
-	iwl4965_commit_rxon(priv);
-
-	memset(&priv->rxon_timing, 0, sizeof(struct iwl4965_rxon_time_cmd));
-	iwl4965_setup_rxon_timing(priv);
-	ret = iwl_send_cmd_pdu(priv, REPLY_RXON_TIMING,
-			      sizeof(priv->rxon_timing), &priv->rxon_timing);
-	if (ret)
-		IWL_WARNING("REPLY_RXON_TIMING failed - "
-			    "Attempting to continue.\n");
-
-	priv->staging_rxon.filter_flags |= RXON_FILTER_ASSOC_MSK;
-
-	if (priv->current_ht_config.is_ht)
-		iwl_set_rxon_ht(priv, &priv->current_ht_config);
-
-	iwl_set_rxon_chain(priv);
-	priv->staging_rxon.assoc_id = cpu_to_le16(priv->assoc_id);
-
-	IWL_DEBUG_ASSOC("assoc id %d beacon interval %d\n",
-			priv->assoc_id, priv->beacon_int);
-
-	if (priv->assoc_capability & WLAN_CAPABILITY_SHORT_PREAMBLE)
-		priv->staging_rxon.flags |= RXON_FLG_SHORT_PREAMBLE_MSK;
-	else
-		priv->staging_rxon.flags &= ~RXON_FLG_SHORT_PREAMBLE_MSK;
-
-	if (priv->staging_rxon.flags & RXON_FLG_BAND_24G_MSK) {
-		if (priv->assoc_capability & WLAN_CAPABILITY_SHORT_SLOT_TIME)
-			priv->staging_rxon.flags |= RXON_FLG_SHORT_SLOT_MSK;
-		else
-			priv->staging_rxon.flags &= ~RXON_FLG_SHORT_SLOT_MSK;
-
-		if (priv->iw_mode == IEEE80211_IF_TYPE_IBSS)
-			priv->staging_rxon.flags &= ~RXON_FLG_SHORT_SLOT_MSK;
-
-	}
-
-	iwl4965_commit_rxon(priv);
-
-	switch (priv->iw_mode) {
-	case IEEE80211_IF_TYPE_STA:
-		break;
-
-	case IEEE80211_IF_TYPE_IBSS:
-
-		/* assume default assoc id */
-		priv->assoc_id = 1;
-
-		iwl_rxon_add_station(priv, priv->bssid, 0);
-		iwl4965_send_beacon_cmd(priv);
-
-		break;
-
-	default:
-		IWL_ERROR("%s Should not be called in %d mode\n",
-				__FUNCTION__, priv->iw_mode);
-		break;
-	}
-
-	/* Enable Rx differential gain and sensitivity calibrations */
-	iwl_chain_noise_reset(priv);
-	priv->start_calib = 1;
-
-	if (priv->iw_mode == IEEE80211_IF_TYPE_IBSS)
-		priv->assoc_station_added = 1;
-
-	spin_lock_irqsave(&priv->lock, flags);
-	iwl_activate_qos(priv, 0);
-	spin_unlock_irqrestore(&priv->lock, flags);
-
-	iwl_power_update_mode(priv, 0);
-	/* we have just associated, don't start scan too early */
-	priv->next_scan_jiffies = jiffies + IWL_DELAY_NEXT_SCAN;
-}
-
-static int iwl4965_mac_config(struct ieee80211_hw *hw, struct ieee80211_conf *conf);
-
-static void iwl_bg_scan_completed(struct work_struct *work)
-{
-	struct iwl_priv *priv =
-	    container_of(work, struct iwl_priv, scan_completed);
-
-	IWL_DEBUG_SCAN("SCAN complete scan\n");
-
-	if (test_bit(STATUS_EXIT_PENDING, &priv->status))
-		return;
-
-	if (test_bit(STATUS_CONF_PENDING, &priv->status))
-		iwl4965_mac_config(priv->hw, ieee80211_get_hw_conf(priv->hw));
-
-	ieee80211_scan_completed(priv->hw);
-
-	/* Since setting the TXPOWER may have been deferred while
-	 * performing the scan, fire one off */
-	mutex_lock(&priv->mutex);
-	iwl_set_tx_power(priv, priv->tx_power_user_lmt, true);
-	mutex_unlock(&priv->mutex);
-}
-
-/*****************************************************************************
- *
- * mac80211 entry point functions
- *
- *****************************************************************************/
-
-#define UCODE_READY_TIMEOUT	(4 * HZ)
-
-static int iwl4965_mac_start(struct ieee80211_hw *hw)
-{
-	struct iwl_priv *priv = hw->priv;
-	int ret;
-
-	IWL_DEBUG_MAC80211("enter\n");
-
-	if (pci_enable_device(priv->pci_dev)) {
-		IWL_ERROR("Fail to pci_enable_device\n");
-		return -ENODEV;
-	}
-	pci_restore_state(priv->pci_dev);
-	pci_enable_msi(priv->pci_dev);
-
-	ret = request_irq(priv->pci_dev->irq, iwl4965_isr, IRQF_SHARED,
-			  DRV_NAME, priv);
-	if (ret) {
-		IWL_ERROR("Error allocating IRQ %d\n", priv->pci_dev->irq);
-		goto out_disable_msi;
-	}
-
-	/* we should be verifying the device is ready to be opened */
-	mutex_lock(&priv->mutex);
-
-	memset(&priv->staging_rxon, 0, sizeof(struct iwl_rxon_cmd));
-	/* fetch ucode file from disk, alloc and copy to bus-master buffers ...
-	 * ucode filename and max sizes are card-specific. */
-
-	if (!priv->ucode_code.len) {
-		ret = iwl4965_read_ucode(priv);
-		if (ret) {
-			IWL_ERROR("Could not read microcode: %d\n", ret);
-			mutex_unlock(&priv->mutex);
-			goto out_release_irq;
-		}
-	}
-
-	ret = __iwl4965_up(priv);
-
-	mutex_unlock(&priv->mutex);
-
-	iwl_rfkill_set_hw_state(priv);
-
-	if (ret)
-		goto out_release_irq;
-
-	IWL_DEBUG_INFO("Start UP work done.\n");
-
-	if (test_bit(STATUS_IN_SUSPEND, &priv->status))
-		return 0;
-
-	/* Wait for START_ALIVE from Run Time ucode. Otherwise callbacks from
-	 * mac80211 will not be run successfully. */
-	ret = wait_event_interruptible_timeout(priv->wait_command_queue,
-			test_bit(STATUS_READY, &priv->status),
-			UCODE_READY_TIMEOUT);
-	if (!ret) {
-		if (!test_bit(STATUS_READY, &priv->status)) {
-			IWL_ERROR("START_ALIVE timeout after %dms.\n",
-				jiffies_to_msecs(UCODE_READY_TIMEOUT));
-			ret = -ETIMEDOUT;
-			goto out_release_irq;
-		}
-	}
-
-	priv->is_open = 1;
-	IWL_DEBUG_MAC80211("leave\n");
-	return 0;
-
-out_release_irq:
-	free_irq(priv->pci_dev->irq, priv);
-out_disable_msi:
-	pci_disable_msi(priv->pci_dev);
-	pci_disable_device(priv->pci_dev);
-	priv->is_open = 0;
-	IWL_DEBUG_MAC80211("leave - failed\n");
-	return ret;
-}
-
-static void iwl4965_mac_stop(struct ieee80211_hw *hw)
-{
-	struct iwl_priv *priv = hw->priv;
-
-	IWL_DEBUG_MAC80211("enter\n");
-
-	if (!priv->is_open) {
-		IWL_DEBUG_MAC80211("leave - skip\n");
-		return;
-	}
-
-	priv->is_open = 0;
-
-	if (iwl_is_ready_rf(priv)) {
-		/* stop mac, cancel any scan request and clear
-		 * RXON_FILTER_ASSOC_MSK BIT
-		 */
-		mutex_lock(&priv->mutex);
-		iwl_scan_cancel_timeout(priv, 100);
-		mutex_unlock(&priv->mutex);
-	}
-
-	iwl4965_down(priv);
-
-	flush_workqueue(priv->workqueue);
-	free_irq(priv->pci_dev->irq, priv);
-	pci_disable_msi(priv->pci_dev);
-	pci_save_state(priv->pci_dev);
-	pci_disable_device(priv->pci_dev);
-
-	IWL_DEBUG_MAC80211("leave\n");
-}
-
-static int iwl4965_mac_tx(struct ieee80211_hw *hw, struct sk_buff *skb)
-{
-	struct iwl_priv *priv = hw->priv;
-
-	IWL_DEBUG_MAC80211("enter\n");
-
-	if (priv->iw_mode == IEEE80211_IF_TYPE_MNTR) {
-		IWL_DEBUG_MAC80211("leave - monitor\n");
-		dev_kfree_skb_any(skb);
-		return 0;
-	}
-
-	IWL_DEBUG_TX("dev->xmit(%d bytes) at rate 0x%02x\n", skb->len,
-		     ieee80211_get_tx_rate(hw, IEEE80211_SKB_CB(skb))->bitrate);
-
-	if (iwl_tx_skb(priv, skb))
-		dev_kfree_skb_any(skb);
-
-	IWL_DEBUG_MAC80211("leave\n");
-	return 0;
-}
-
-static int iwl4965_mac_add_interface(struct ieee80211_hw *hw,
-				 struct ieee80211_if_init_conf *conf)
-{
-	struct iwl_priv *priv = hw->priv;
-	unsigned long flags;
-	DECLARE_MAC_BUF(mac);
-
-	IWL_DEBUG_MAC80211("enter: type %d\n", conf->type);
-
-	if (priv->vif) {
-		IWL_DEBUG_MAC80211("leave - vif != NULL\n");
-		return -EOPNOTSUPP;
-	}
-
-	spin_lock_irqsave(&priv->lock, flags);
-	priv->vif = conf->vif;
-
-	spin_unlock_irqrestore(&priv->lock, flags);
-
-	mutex_lock(&priv->mutex);
-
-	if (conf->mac_addr) {
-		IWL_DEBUG_MAC80211("Set %s\n", print_mac(mac, conf->mac_addr));
-		memcpy(priv->mac_addr, conf->mac_addr, ETH_ALEN);
-	}
-
-	if (iwl4965_set_mode(priv, conf->type) == -EAGAIN)
-		/* we are not ready, will run again when ready */
-		set_bit(STATUS_MODE_PENDING, &priv->status);
-
-	mutex_unlock(&priv->mutex);
-
-	IWL_DEBUG_MAC80211("leave\n");
-	return 0;
-}
-
-/**
- * iwl4965_mac_config - mac80211 config callback
- *
- * We ignore conf->flags & IEEE80211_CONF_SHORT_SLOT_TIME since it seems to
- * be set inappropriately and the driver currently sets the hardware up to
- * use it whenever needed.
- */
-static int iwl4965_mac_config(struct ieee80211_hw *hw, struct ieee80211_conf *conf)
-{
-	struct iwl_priv *priv = hw->priv;
-	const struct iwl_channel_info *ch_info;
-	unsigned long flags;
-	int ret = 0;
-	u16 channel;
-
-	mutex_lock(&priv->mutex);
-	IWL_DEBUG_MAC80211("enter to channel %d\n", conf->channel->hw_value);
-
-	priv->add_radiotap = !!(conf->flags & IEEE80211_CONF_RADIOTAP);
-
-	if (conf->radio_enabled && iwl_radio_kill_sw_enable_radio(priv)) {
-		IWL_DEBUG_MAC80211("leave - RF-KILL - waiting for uCode\n");
-		goto out;
-	}
-
-	if (!conf->radio_enabled)
-		iwl_radio_kill_sw_disable_radio(priv);
-
-	if (!iwl_is_ready(priv)) {
-		IWL_DEBUG_MAC80211("leave - not ready\n");
-		ret = -EIO;
-		goto out;
-	}
-
-	if (unlikely(!priv->cfg->mod_params->disable_hw_scan &&
-		     test_bit(STATUS_SCANNING, &priv->status))) {
-		IWL_DEBUG_MAC80211("leave - scanning\n");
-		set_bit(STATUS_CONF_PENDING, &priv->status);
-		mutex_unlock(&priv->mutex);
-		return 0;
-	}
-
-	channel = ieee80211_frequency_to_channel(conf->channel->center_freq);
-	ch_info = iwl_get_channel_info(priv, conf->channel->band, channel);
-	if (!is_channel_valid(ch_info)) {
-		IWL_DEBUG_MAC80211("leave - invalid channel\n");
-		ret = -EINVAL;
-		goto out;
-	}
-
-	if (priv->iw_mode == IEEE80211_IF_TYPE_IBSS &&
-	    !is_channel_ibss(ch_info)) {
-		IWL_ERROR("channel %d in band %d not IBSS channel\n",
-			conf->channel->hw_value, conf->channel->band);
-		ret = -EINVAL;
-		goto out;
-	}
-
-	spin_lock_irqsave(&priv->lock, flags);
-
-	/* if we are switching from ht to 2.4 clear flags
-	 * from any ht related info since 2.4 does not
-	 * support ht */
-	if ((le16_to_cpu(priv->staging_rxon.channel) != channel)
-#ifdef IEEE80211_CONF_CHANNEL_SWITCH
-	    && !(conf->flags & IEEE80211_CONF_CHANNEL_SWITCH)
-#endif
-	)
-		priv->staging_rxon.flags = 0;
-
-	iwl_set_rxon_channel(priv, conf->channel->band, channel);
-
-	iwl_set_flags_for_band(priv, conf->channel->band);
-
-	/* The list of supported rates and rate mask can be different
-	 * for each band; since the band may have changed, reset
-	 * the rate mask to what mac80211 lists */
-	iwl4965_set_rate(priv);
-
-	spin_unlock_irqrestore(&priv->lock, flags);
-
-#ifdef IEEE80211_CONF_CHANNEL_SWITCH
-	if (conf->flags & IEEE80211_CONF_CHANNEL_SWITCH) {
-		iwl4965_hw_channel_switch(priv, conf->channel);
-		goto out;
-	}
-#endif
-
-	if (!conf->radio_enabled) {
-		IWL_DEBUG_MAC80211("leave - radio disabled\n");
-		goto out;
-	}
-
-	if (iwl_is_rfkill(priv)) {
-		IWL_DEBUG_MAC80211("leave - RF kill\n");
-		ret = -EIO;
-		goto out;
-	}
-
-	IWL_DEBUG_MAC80211("TX Power old=%d new=%d\n",
-			   priv->tx_power_user_lmt, conf->power_level);
-
-	iwl_set_tx_power(priv, conf->power_level, false);
-
-	iwl4965_set_rate(priv);
-
-	if (memcmp(&priv->active_rxon,
-		   &priv->staging_rxon, sizeof(priv->staging_rxon)))
-		iwl4965_commit_rxon(priv);
-	else
-		IWL_DEBUG_INFO("No re-sending same RXON configuration.\n");
-
-	IWL_DEBUG_MAC80211("leave\n");
-
-out:
-	clear_bit(STATUS_CONF_PENDING, &priv->status);
-	mutex_unlock(&priv->mutex);
-	return ret;
-}
-
-static void iwl4965_config_ap(struct iwl_priv *priv)
-{
-	int ret = 0;
-	unsigned long flags;
-
-	if (test_bit(STATUS_EXIT_PENDING, &priv->status))
-		return;
-
-	/* The following should be done only at AP bring up */
-	if (!(iwl_is_associated(priv))) {
-
-		/* RXON - unassoc (to set timing command) */
-		priv->staging_rxon.filter_flags &= ~RXON_FILTER_ASSOC_MSK;
-		iwl4965_commit_rxon(priv);
-
-		/* RXON Timing */
-		memset(&priv->rxon_timing, 0, sizeof(struct iwl4965_rxon_time_cmd));
-		iwl4965_setup_rxon_timing(priv);
-		ret = iwl_send_cmd_pdu(priv, REPLY_RXON_TIMING,
-				sizeof(priv->rxon_timing), &priv->rxon_timing);
-		if (ret)
-			IWL_WARNING("REPLY_RXON_TIMING failed - "
-					"Attempting to continue.\n");
-
-		iwl_set_rxon_chain(priv);
-
-		/* FIXME: what should be the assoc_id for AP? */
-		priv->staging_rxon.assoc_id = cpu_to_le16(priv->assoc_id);
-		if (priv->assoc_capability & WLAN_CAPABILITY_SHORT_PREAMBLE)
-			priv->staging_rxon.flags |=
-				RXON_FLG_SHORT_PREAMBLE_MSK;
-		else
-			priv->staging_rxon.flags &=
-				~RXON_FLG_SHORT_PREAMBLE_MSK;
-
-		if (priv->staging_rxon.flags & RXON_FLG_BAND_24G_MSK) {
-			if (priv->assoc_capability &
-				WLAN_CAPABILITY_SHORT_SLOT_TIME)
-				priv->staging_rxon.flags |=
-					RXON_FLG_SHORT_SLOT_MSK;
-			else
-				priv->staging_rxon.flags &=
-					~RXON_FLG_SHORT_SLOT_MSK;
-
-			if (priv->iw_mode == IEEE80211_IF_TYPE_IBSS)
-				priv->staging_rxon.flags &=
-					~RXON_FLG_SHORT_SLOT_MSK;
-		}
-		/* restore RXON assoc */
-		priv->staging_rxon.filter_flags |= RXON_FILTER_ASSOC_MSK;
-		iwl4965_commit_rxon(priv);
-		spin_lock_irqsave(&priv->lock, flags);
-		iwl_activate_qos(priv, 1);
-		spin_unlock_irqrestore(&priv->lock, flags);
-		iwl_rxon_add_station(priv, iwl_bcast_addr, 0);
-	}
-	iwl4965_send_beacon_cmd(priv);
-
-	/* FIXME - we need to add code here to detect a totally new
-	 * configuration, reset the AP, unassoc, rxon timing, assoc,
-	 * clear sta table, add BCAST sta... */
-}
-
-/* temporary */
-static int iwl4965_mac_beacon_update(struct ieee80211_hw *hw, struct sk_buff *skb);
-
-static int iwl4965_mac_config_interface(struct ieee80211_hw *hw,
-					struct ieee80211_vif *vif,
-				    struct ieee80211_if_conf *conf)
-{
-	struct iwl_priv *priv = hw->priv;
-	DECLARE_MAC_BUF(mac);
-	unsigned long flags;
-	int rc;
-
-	if (conf == NULL)
-		return -EIO;
-
-	if (priv->vif != vif) {
-		IWL_DEBUG_MAC80211("leave - priv->vif != vif\n");
-		return 0;
-	}
-
-	if (priv->iw_mode == IEEE80211_IF_TYPE_IBSS &&
-	    conf->changed & IEEE80211_IFCC_BEACON) {
-		struct sk_buff *beacon = ieee80211_beacon_get(hw, vif);
-		if (!beacon)
-			return -ENOMEM;
-		rc = iwl4965_mac_beacon_update(hw, beacon);
-		if (rc)
-			return rc;
-	}
-
-	if ((priv->iw_mode == IEEE80211_IF_TYPE_AP) &&
-	    (!conf->ssid_len)) {
-		IWL_DEBUG_MAC80211
-		    ("Leaving in AP mode because HostAPD is not ready.\n");
-		return 0;
-	}
-
-	if (!iwl_is_alive(priv))
-		return -EAGAIN;
-
-	mutex_lock(&priv->mutex);
-
-	if (conf->bssid)
-		IWL_DEBUG_MAC80211("bssid: %s\n",
-				   print_mac(mac, conf->bssid));
-
-/*
- * very dubious code was here; the probe filtering flag is never set:
- *
-	if (unlikely(test_bit(STATUS_SCANNING, &priv->status)) &&
-	    !(priv->hw->flags & IEEE80211_HW_NO_PROBE_FILTERING)) {
- */
-
-	if (priv->iw_mode == IEEE80211_IF_TYPE_AP) {
-		if (!conf->bssid) {
-			conf->bssid = priv->mac_addr;
-			memcpy(priv->bssid, priv->mac_addr, ETH_ALEN);
-			IWL_DEBUG_MAC80211("bssid was set to: %s\n",
-					   print_mac(mac, conf->bssid));
-		}
-		if (priv->ibss_beacon)
-			dev_kfree_skb(priv->ibss_beacon);
-
-		priv->ibss_beacon = ieee80211_beacon_get(hw, vif);
-	}
-
-	if (iwl_is_rfkill(priv))
-		goto done;
-
-	if (conf->bssid && !is_zero_ether_addr(conf->bssid) &&
-	    !is_multicast_ether_addr(conf->bssid)) {
-		/* If there is currently a HW scan going on in the background
-		 * then we need to cancel it else the RXON below will fail. */
-		if (iwl_scan_cancel_timeout(priv, 100)) {
-			IWL_WARNING("Aborted scan still in progress "
-				    "after 100ms\n");
-			IWL_DEBUG_MAC80211("leaving - scan abort failed.\n");
-			mutex_unlock(&priv->mutex);
-			return -EAGAIN;
-		}
-		memcpy(priv->staging_rxon.bssid_addr, conf->bssid, ETH_ALEN);
-
-		/* TODO: Audit driver for usage of these members and see
-		 * if mac80211 deprecates them (priv->bssid looks like it
-		 * shouldn't be there, but I haven't scanned the IBSS code
-		 * to verify) - jpk */
-		memcpy(priv->bssid, conf->bssid, ETH_ALEN);
-
-		if (priv->iw_mode == IEEE80211_IF_TYPE_AP)
-			iwl4965_config_ap(priv);
-		else {
-			rc = iwl4965_commit_rxon(priv);
-			if ((priv->iw_mode == IEEE80211_IF_TYPE_STA) && rc)
-				iwl_rxon_add_station(
-					priv, priv->active_rxon.bssid_addr, 1);
-		}
-
-	} else {
-		iwl_scan_cancel_timeout(priv, 100);
-		priv->staging_rxon.filter_flags &= ~RXON_FILTER_ASSOC_MSK;
-		iwl4965_commit_rxon(priv);
-	}
-
- done:
-	spin_lock_irqsave(&priv->lock, flags);
-	if (!conf->ssid_len)
-		memset(priv->essid, 0, IW_ESSID_MAX_SIZE);
-	else
-		memcpy(priv->essid, conf->ssid, conf->ssid_len);
-
-	priv->essid_len = conf->ssid_len;
-	spin_unlock_irqrestore(&priv->lock, flags);
-
-	IWL_DEBUG_MAC80211("leave\n");
-	mutex_unlock(&priv->mutex);
-
-	return 0;
-}
-
-static void iwl4965_configure_filter(struct ieee80211_hw *hw,
-				 unsigned int changed_flags,
-				 unsigned int *total_flags,
-				 int mc_count, struct dev_addr_list *mc_list)
-{
-	struct iwl_priv *priv = hw->priv;
-
-	if (changed_flags & (*total_flags) & FIF_OTHER_BSS) {
-		IWL_DEBUG_MAC80211("Enter: type %d (0x%x, 0x%x)\n",
-				   IEEE80211_IF_TYPE_MNTR,
-				   changed_flags, *total_flags);
-		/* queue work 'cuz mac80211 is holding a lock which
-		 * prevents us from issuing (synchronous) f/w cmds */
-		queue_work(priv->workqueue, &priv->set_monitor);
-	}
-	*total_flags &= FIF_OTHER_BSS | FIF_ALLMULTI |
-			FIF_BCN_PRBRESP_PROMISC | FIF_CONTROL;
-}
-
-static void iwl4965_mac_remove_interface(struct ieee80211_hw *hw,
-				     struct ieee80211_if_init_conf *conf)
-{
-	struct iwl_priv *priv = hw->priv;
-
-	IWL_DEBUG_MAC80211("enter\n");
-
-	mutex_lock(&priv->mutex);
-
-	if (iwl_is_ready_rf(priv)) {
-		iwl_scan_cancel_timeout(priv, 100);
-		priv->staging_rxon.filter_flags &= ~RXON_FILTER_ASSOC_MSK;
-		iwl4965_commit_rxon(priv);
-	}
-	if (priv->vif == conf->vif) {
-		priv->vif = NULL;
-		memset(priv->bssid, 0, ETH_ALEN);
-		memset(priv->essid, 0, IW_ESSID_MAX_SIZE);
-		priv->essid_len = 0;
-	}
-	mutex_unlock(&priv->mutex);
-
-	IWL_DEBUG_MAC80211("leave\n");
-
-}
-
-#define IWL_DELAY_NEXT_SCAN_AFTER_ASSOC (HZ*6)
-static void iwl4965_bss_info_changed(struct ieee80211_hw *hw,
-				     struct ieee80211_vif *vif,
-				     struct ieee80211_bss_conf *bss_conf,
-				     u32 changes)
-{
-	struct iwl_priv *priv = hw->priv;
-
-	IWL_DEBUG_MAC80211("changes = 0x%X\n", changes);
-
-	if (changes & BSS_CHANGED_ERP_PREAMBLE) {
-		IWL_DEBUG_MAC80211("ERP_PREAMBLE %d\n",
-				   bss_conf->use_short_preamble);
-		if (bss_conf->use_short_preamble)
-			priv->staging_rxon.flags |= RXON_FLG_SHORT_PREAMBLE_MSK;
-		else
-			priv->staging_rxon.flags &= ~RXON_FLG_SHORT_PREAMBLE_MSK;
-	}
-
-	if (changes & BSS_CHANGED_ERP_CTS_PROT) {
-		IWL_DEBUG_MAC80211("ERP_CTS %d\n", bss_conf->use_cts_prot);
-		if (bss_conf->use_cts_prot && (priv->band != IEEE80211_BAND_5GHZ))
-			priv->staging_rxon.flags |= RXON_FLG_TGG_PROTECT_MSK;
-		else
-			priv->staging_rxon.flags &= ~RXON_FLG_TGG_PROTECT_MSK;
-	}
-
-	if (changes & BSS_CHANGED_HT) {
-		IWL_DEBUG_MAC80211("HT %d\n", bss_conf->assoc_ht);
-		iwl4965_ht_conf(priv, bss_conf);
-		iwl_set_rxon_chain(priv);
-	}
-
-	if (changes & BSS_CHANGED_ASSOC) {
-		IWL_DEBUG_MAC80211("ASSOC %d\n", bss_conf->assoc);
-		/* This should never happen as this function should
-		 * never be called from interrupt context. */
-		if (WARN_ON_ONCE(in_interrupt()))
-			return;
-		if (bss_conf->assoc) {
-			priv->assoc_id = bss_conf->aid;
-			priv->beacon_int = bss_conf->beacon_int;
-			priv->timestamp = bss_conf->timestamp;
-			priv->assoc_capability = bss_conf->assoc_capability;
-			priv->next_scan_jiffies = jiffies +
-					IWL_DELAY_NEXT_SCAN_AFTER_ASSOC;
-			mutex_lock(&priv->mutex);
-			iwl4965_post_associate(priv);
-			mutex_unlock(&priv->mutex);
-		} else {
-			priv->assoc_id = 0;
-			IWL_DEBUG_MAC80211("DISASSOC %d\n", bss_conf->assoc);
-		}
-	} else if (changes && iwl_is_associated(priv) && priv->assoc_id) {
-			IWL_DEBUG_MAC80211("Associated Changes %d\n", changes);
-			iwl_send_rxon_assoc(priv);
-	}
-
-}
-
-static int iwl4965_mac_hw_scan(struct ieee80211_hw *hw, u8 *ssid, size_t len)
-{
-	int rc = 0;
-	unsigned long flags;
-	struct iwl_priv *priv = hw->priv;
-
-	IWL_DEBUG_MAC80211("enter\n");
-
-	mutex_lock(&priv->mutex);
-	spin_lock_irqsave(&priv->lock, flags);
-
-	if (!iwl_is_ready_rf(priv)) {
-		rc = -EIO;
-		IWL_DEBUG_MAC80211("leave - not ready or exit pending\n");
-		goto out_unlock;
-	}
-
-	if (priv->iw_mode == IEEE80211_IF_TYPE_AP) {	/* APs don't scan */
-		rc = -EIO;
-		IWL_ERROR("ERROR: APs don't scan\n");
-		goto out_unlock;
-	}
-
-	/* we don't schedule scan within next_scan_jiffies period */
-	if (priv->next_scan_jiffies &&
-			time_after(priv->next_scan_jiffies, jiffies)) {
-		rc = -EAGAIN;
-		goto out_unlock;
-	}
-	/* if we just finished scan ask for delay */
-	if (priv->last_scan_jiffies && time_after(priv->last_scan_jiffies +
-				IWL_DELAY_NEXT_SCAN, jiffies)) {
-		rc = -EAGAIN;
-		goto out_unlock;
-	}
-	if (len) {
-		IWL_DEBUG_SCAN("direct scan for %s [%d]\n ",
-			       iwl_escape_essid(ssid, len), (int)len);
-
-		priv->one_direct_scan = 1;
-		priv->direct_ssid_len = (u8)
-		    min((u8) len, (u8) IW_ESSID_MAX_SIZE);
-		memcpy(priv->direct_ssid, ssid, priv->direct_ssid_len);
-	} else
-		priv->one_direct_scan = 0;
-
-	rc = iwl_scan_initiate(priv);
-
-	IWL_DEBUG_MAC80211("leave\n");
-
-out_unlock:
-	spin_unlock_irqrestore(&priv->lock, flags);
-	mutex_unlock(&priv->mutex);
-
-	return rc;
-}
-
-static void iwl4965_mac_update_tkip_key(struct ieee80211_hw *hw,
-			struct ieee80211_key_conf *keyconf, const u8 *addr,
-			u32 iv32, u16 *phase1key)
-{
-	struct iwl_priv *priv = hw->priv;
-	u8 sta_id = IWL_INVALID_STATION;
-	unsigned long flags;
-	__le16 key_flags = 0;
-	int i;
-	DECLARE_MAC_BUF(mac);
-
-	IWL_DEBUG_MAC80211("enter\n");
-
-	sta_id = iwl_find_station(priv, addr);
-	if (sta_id == IWL_INVALID_STATION) {
-		IWL_DEBUG_MAC80211("leave - %s not in station map.\n",
-				   print_mac(mac, addr));
-		return;
-	}
-
-	iwl_scan_cancel_timeout(priv, 100);
-
-	key_flags |= (STA_KEY_FLG_TKIP | STA_KEY_FLG_MAP_KEY_MSK);
-	key_flags |= cpu_to_le16(keyconf->keyidx << STA_KEY_FLG_KEYID_POS);
-	key_flags &= ~STA_KEY_FLG_INVALID;
-
-	if (sta_id == priv->hw_params.bcast_sta_id)
-		key_flags |= STA_KEY_MULTICAST_MSK;
-
-	spin_lock_irqsave(&priv->sta_lock, flags);
-
-	priv->stations[sta_id].sta.key.key_flags = key_flags;
-	priv->stations[sta_id].sta.key.tkip_rx_tsc_byte2 = (u8) iv32;
-
-	for (i = 0; i < 5; i++)
-		priv->stations[sta_id].sta.key.tkip_rx_ttak[i] =
-			cpu_to_le16(phase1key[i]);
-
-	priv->stations[sta_id].sta.sta.modify_mask = STA_MODIFY_KEY_MASK;
-	priv->stations[sta_id].sta.mode = STA_CONTROL_MODIFY_MSK;
-
-	iwl_send_add_sta(priv, &priv->stations[sta_id].sta, CMD_ASYNC);
-
-	spin_unlock_irqrestore(&priv->sta_lock, flags);
-
-	IWL_DEBUG_MAC80211("leave\n");
-}
-
-static int iwl4965_mac_set_key(struct ieee80211_hw *hw, enum set_key_cmd cmd,
-			   const u8 *local_addr, const u8 *addr,
-			   struct ieee80211_key_conf *key)
-{
-	struct iwl_priv *priv = hw->priv;
-	DECLARE_MAC_BUF(mac);
-	int ret = 0;
-	u8 sta_id = IWL_INVALID_STATION;
-	u8 is_default_wep_key = 0;
-
-	IWL_DEBUG_MAC80211("enter\n");
-
-	if (priv->hw_params.sw_crypto) {
-		IWL_DEBUG_MAC80211("leave - hwcrypto disabled\n");
-		return -EOPNOTSUPP;
-	}
-
-	if (is_zero_ether_addr(addr))
-		/* only support pairwise keys */
-		return -EOPNOTSUPP;
-
-	sta_id = iwl_find_station(priv, addr);
-	if (sta_id == IWL_INVALID_STATION) {
-		IWL_DEBUG_MAC80211("leave - %s not in station map.\n",
-				   print_mac(mac, addr));
-		return -EINVAL;
-
-	}
-
-	mutex_lock(&priv->mutex);
-	iwl_scan_cancel_timeout(priv, 100);
-	mutex_unlock(&priv->mutex);
-
-	/* If we are getting WEP group key and we didn't receive any key mapping
-	 * so far, we are in legacy wep mode (group key only), otherwise we are
-	 * in 1X mode.
-	 * In legacy wep mode, we use another host command to the uCode */
-	if (key->alg == ALG_WEP && sta_id == priv->hw_params.bcast_sta_id &&
-		priv->iw_mode != IEEE80211_IF_TYPE_AP) {
-		if (cmd == SET_KEY)
-			is_default_wep_key = !priv->key_mapping_key;
-		else
-			is_default_wep_key =
-					(key->hw_key_idx == HW_KEY_DEFAULT);
-	}
-
-	switch (cmd) {
-	case SET_KEY:
-		if (is_default_wep_key)
-			ret = iwl_set_default_wep_key(priv, key);
-		else
-			ret = iwl_set_dynamic_key(priv, key, sta_id);
-
-		IWL_DEBUG_MAC80211("enable hwcrypto key\n");
-		break;
-	case DISABLE_KEY:
-		if (is_default_wep_key)
-			ret = iwl_remove_default_wep_key(priv, key);
-		else
-			ret = iwl_remove_dynamic_key(priv, key, sta_id);
-
-		IWL_DEBUG_MAC80211("disable hwcrypto key\n");
-		break;
-	default:
-		ret = -EINVAL;
-	}
-
-	IWL_DEBUG_MAC80211("leave\n");
-
-	return ret;
-}
-
-static int iwl4965_mac_conf_tx(struct ieee80211_hw *hw, u16 queue,
-			   const struct ieee80211_tx_queue_params *params)
-{
-	struct iwl_priv *priv = hw->priv;
-	unsigned long flags;
-	int q;
-
-	IWL_DEBUG_MAC80211("enter\n");
-
-	if (!iwl_is_ready_rf(priv)) {
-		IWL_DEBUG_MAC80211("leave - RF not ready\n");
-		return -EIO;
-	}
-
-	if (queue >= AC_NUM) {
-		IWL_DEBUG_MAC80211("leave - queue >= AC_NUM %d\n", queue);
-		return 0;
-	}
-
-	if (!priv->qos_data.qos_enable) {
-		priv->qos_data.qos_active = 0;
-		IWL_DEBUG_MAC80211("leave - qos not enabled\n");
-		return 0;
-	}
-	q = AC_NUM - 1 - queue;
-
-	spin_lock_irqsave(&priv->lock, flags);
-
-	priv->qos_data.def_qos_parm.ac[q].cw_min = cpu_to_le16(params->cw_min);
-	priv->qos_data.def_qos_parm.ac[q].cw_max = cpu_to_le16(params->cw_max);
-	priv->qos_data.def_qos_parm.ac[q].aifsn = params->aifs;
-	priv->qos_data.def_qos_parm.ac[q].edca_txop =
-			cpu_to_le16((params->txop * 32));
-
-	priv->qos_data.def_qos_parm.ac[q].reserved1 = 0;
-	priv->qos_data.qos_active = 1;
-
-	if (priv->iw_mode == IEEE80211_IF_TYPE_AP)
-		iwl_activate_qos(priv, 1);
-	else if (priv->assoc_id && iwl_is_associated(priv))
-		iwl_activate_qos(priv, 0);
-
-	spin_unlock_irqrestore(&priv->lock, flags);
-
-	IWL_DEBUG_MAC80211("leave\n");
-	return 0;
-}
-
-static int iwl4965_mac_get_tx_stats(struct ieee80211_hw *hw,
-				struct ieee80211_tx_queue_stats *stats)
-{
-	struct iwl_priv *priv = hw->priv;
-	int i, avail;
-	struct iwl_tx_queue *txq;
-	struct iwl_queue *q;
-	unsigned long flags;
-
-	IWL_DEBUG_MAC80211("enter\n");
-
-	if (!iwl_is_ready_rf(priv)) {
-		IWL_DEBUG_MAC80211("leave - RF not ready\n");
-		return -EIO;
-	}
-
-	spin_lock_irqsave(&priv->lock, flags);
-
-	for (i = 0; i < AC_NUM; i++) {
-		txq = &priv->txq[i];
-		q = &txq->q;
-		avail = iwl_queue_space(q);
-
-		stats[i].len = q->n_window - avail;
-		stats[i].limit = q->n_window - q->high_mark;
-		stats[i].count = q->n_window;
-
-	}
-	spin_unlock_irqrestore(&priv->lock, flags);
-
-	IWL_DEBUG_MAC80211("leave\n");
-
-	return 0;
-}
-
-static int iwl4965_mac_get_stats(struct ieee80211_hw *hw,
-			     struct ieee80211_low_level_stats *stats)
-{
-	struct iwl_priv *priv = hw->priv;
-
-	priv = hw->priv;
-	IWL_DEBUG_MAC80211("enter\n");
-	IWL_DEBUG_MAC80211("leave\n");
-
-	return 0;
-}
-
-static void iwl4965_mac_reset_tsf(struct ieee80211_hw *hw)
-{
-	struct iwl_priv *priv = hw->priv;
-	unsigned long flags;
-
-	mutex_lock(&priv->mutex);
-	IWL_DEBUG_MAC80211("enter\n");
-
-	spin_lock_irqsave(&priv->lock, flags);
-	memset(&priv->current_ht_config, 0, sizeof(struct iwl_ht_info));
-	spin_unlock_irqrestore(&priv->lock, flags);
-
-	iwl_reset_qos(priv);
-
-	spin_lock_irqsave(&priv->lock, flags);
-	priv->assoc_id = 0;
-	priv->assoc_capability = 0;
-	priv->assoc_station_added = 0;
-
-	/* new association get rid of ibss beacon skb */
-	if (priv->ibss_beacon)
-		dev_kfree_skb(priv->ibss_beacon);
-
-	priv->ibss_beacon = NULL;
-
-	priv->beacon_int = priv->hw->conf.beacon_int;
-	priv->timestamp = 0;
-	if ((priv->iw_mode == IEEE80211_IF_TYPE_STA))
-		priv->beacon_int = 0;
-
-	spin_unlock_irqrestore(&priv->lock, flags);
-
-	if (!iwl_is_ready_rf(priv)) {
-		IWL_DEBUG_MAC80211("leave - not ready\n");
-		mutex_unlock(&priv->mutex);
-		return;
-	}
-
-	/* we are restarting association process
-	 * clear RXON_FILTER_ASSOC_MSK bit
-	 */
-	if (priv->iw_mode != IEEE80211_IF_TYPE_AP) {
-		iwl_scan_cancel_timeout(priv, 100);
-		priv->staging_rxon.filter_flags &= ~RXON_FILTER_ASSOC_MSK;
-		iwl4965_commit_rxon(priv);
-	}
-
-	iwl_power_update_mode(priv, 0);
-
-	/* Per mac80211.h: This is only used in IBSS mode... */
-	if (priv->iw_mode != IEEE80211_IF_TYPE_IBSS) {
-
-		IWL_DEBUG_MAC80211("leave - not in IBSS\n");
-		mutex_unlock(&priv->mutex);
-		return;
-	}
-
-	iwl4965_set_rate(priv);
-
-	mutex_unlock(&priv->mutex);
-
-	IWL_DEBUG_MAC80211("leave\n");
-}
-
-static int iwl4965_mac_beacon_update(struct ieee80211_hw *hw, struct sk_buff *skb)
-{
-	struct iwl_priv *priv = hw->priv;
-	unsigned long flags;
-	__le64 timestamp;
-
-	mutex_lock(&priv->mutex);
-	IWL_DEBUG_MAC80211("enter\n");
-
-	if (!iwl_is_ready_rf(priv)) {
-		IWL_DEBUG_MAC80211("leave - RF not ready\n");
-		mutex_unlock(&priv->mutex);
-		return -EIO;
-	}
-
-	if (priv->iw_mode != IEEE80211_IF_TYPE_IBSS) {
-		IWL_DEBUG_MAC80211("leave - not IBSS\n");
-		mutex_unlock(&priv->mutex);
-		return -EIO;
-	}
-
-	spin_lock_irqsave(&priv->lock, flags);
-
-	if (priv->ibss_beacon)
-		dev_kfree_skb(priv->ibss_beacon);
-
-	priv->ibss_beacon = skb;
-
-	priv->assoc_id = 0;
-	timestamp = ((struct ieee80211_mgmt *)skb->data)->u.beacon.timestamp;
-	priv->timestamp = le64_to_cpu(timestamp) +  (priv->beacon_int * 1000);
-
-	IWL_DEBUG_MAC80211("leave\n");
-	spin_unlock_irqrestore(&priv->lock, flags);
-
-	iwl_reset_qos(priv);
-
-	iwl4965_post_associate(priv);
-
-	mutex_unlock(&priv->mutex);
-
-	return 0;
-}
-
-/*****************************************************************************
- *
- * sysfs attributes
- *
- *****************************************************************************/
-
-#ifdef CONFIG_IWLWIFI_DEBUG
-
-/*
- * The following adds a new attribute to the sysfs representation
- * of this device driver (i.e. a new file in /sys/bus/pci/drivers/iwl/)
- * used for controlling the debug level.
- *
- * See the level definitions in iwl for details.
- */
-
-static ssize_t show_debug_level(struct device *d,
-				struct device_attribute *attr, char *buf)
-{
-	struct iwl_priv *priv = d->driver_data;
-
-	return sprintf(buf, "0x%08X\n", priv->debug_level);
-}
-static ssize_t store_debug_level(struct device *d,
-				struct device_attribute *attr,
-				 const char *buf, size_t count)
-{
-	struct iwl_priv *priv = d->driver_data;
-	char *p = (char *)buf;
-	u32 val;
-
-	val = simple_strtoul(p, &p, 0);
-	if (p == buf)
-		printk(KERN_INFO DRV_NAME
-		       ": %s is not in hex or decimal form.\n", buf);
-	else
-		priv->debug_level = val;
-
-	return strnlen(buf, count);
-}
-
-static DEVICE_ATTR(debug_level, S_IWUSR | S_IRUGO,
-			show_debug_level, store_debug_level);
-
-
-#endif /* CONFIG_IWLWIFI_DEBUG */
-
-
-static ssize_t show_version(struct device *d,
-				struct device_attribute *attr, char *buf)
-{
-	struct iwl_priv *priv = d->driver_data;
-	struct iwl_alive_resp *palive = &priv->card_alive;
-	ssize_t pos = 0;
-	u16 eeprom_ver;
-
-	if (palive->is_valid)
-		pos += sprintf(buf + pos,
-				"fw version: 0x%01X.0x%01X.0x%01X.0x%01X\n"
-				"fw type: 0x%01X 0x%01X\n",
-				palive->ucode_major, palive->ucode_minor,
-				palive->sw_rev[0], palive->sw_rev[1],
-				palive->ver_type, palive->ver_subtype);
-	else
-		pos += sprintf(buf + pos, "fw not loaded\n");
-
-	if (priv->eeprom) {
-		eeprom_ver = iwl_eeprom_query16(priv, EEPROM_VERSION);
-		pos += sprintf(buf + pos, "EEPROM version: 0x%x\n",
-				 eeprom_ver);
-	} else {
-		pos += sprintf(buf + pos, "EEPROM not initialzed\n");
-	}
-
-	return pos;
-}
-
-static DEVICE_ATTR(version, S_IWUSR | S_IRUGO, show_version, NULL);
-
-static ssize_t show_temperature(struct device *d,
-				struct device_attribute *attr, char *buf)
-{
-	struct iwl_priv *priv = (struct iwl_priv *)d->driver_data;
-
-	if (!iwl_is_alive(priv))
-		return -EAGAIN;
-
-	return sprintf(buf, "%d\n", priv->temperature);
-}
-
-static DEVICE_ATTR(temperature, S_IRUGO, show_temperature, NULL);
-
-static ssize_t show_rs_window(struct device *d,
-			      struct device_attribute *attr,
-			      char *buf)
-{
-	struct iwl_priv *priv = d->driver_data;
-	return iwl4965_fill_rs_info(priv->hw, buf, IWL_AP_ID);
-}
-static DEVICE_ATTR(rs_window, S_IRUGO, show_rs_window, NULL);
-
-static ssize_t show_tx_power(struct device *d,
-			     struct device_attribute *attr, char *buf)
-{
-	struct iwl_priv *priv = (struct iwl_priv *)d->driver_data;
-	return sprintf(buf, "%d\n", priv->tx_power_user_lmt);
-}
-
-static ssize_t store_tx_power(struct device *d,
-			      struct device_attribute *attr,
-			      const char *buf, size_t count)
-{
-	struct iwl_priv *priv = (struct iwl_priv *)d->driver_data;
-	char *p = (char *)buf;
-	u32 val;
-
-	val = simple_strtoul(p, &p, 10);
-	if (p == buf)
-		printk(KERN_INFO DRV_NAME
-		       ": %s is not in decimal form.\n", buf);
-	else
-		iwl_set_tx_power(priv, val, false);
-
-	return count;
-}
-
-static DEVICE_ATTR(tx_power, S_IWUSR | S_IRUGO, show_tx_power, store_tx_power);
-
-static ssize_t show_flags(struct device *d,
-			  struct device_attribute *attr, char *buf)
-{
-	struct iwl_priv *priv = (struct iwl_priv *)d->driver_data;
-
-	return sprintf(buf, "0x%04X\n", priv->active_rxon.flags);
-}
-
-static ssize_t store_flags(struct device *d,
-			   struct device_attribute *attr,
-			   const char *buf, size_t count)
-{
-	struct iwl_priv *priv = (struct iwl_priv *)d->driver_data;
-	u32 flags = simple_strtoul(buf, NULL, 0);
-
-	mutex_lock(&priv->mutex);
-	if (le32_to_cpu(priv->staging_rxon.flags) != flags) {
-		/* Cancel any currently running scans... */
-		if (iwl_scan_cancel_timeout(priv, 100))
-			IWL_WARNING("Could not cancel scan.\n");
-		else {
-			IWL_DEBUG_INFO("Committing rxon.flags = 0x%04X\n",
-				       flags);
-			priv->staging_rxon.flags = cpu_to_le32(flags);
-			iwl4965_commit_rxon(priv);
-		}
-	}
-	mutex_unlock(&priv->mutex);
-
-	return count;
-}
-
-static DEVICE_ATTR(flags, S_IWUSR | S_IRUGO, show_flags, store_flags);
-
-static ssize_t show_filter_flags(struct device *d,
-				 struct device_attribute *attr, char *buf)
-{
-	struct iwl_priv *priv = (struct iwl_priv *)d->driver_data;
-
-	return sprintf(buf, "0x%04X\n",
-		le32_to_cpu(priv->active_rxon.filter_flags));
-}
-
-static ssize_t store_filter_flags(struct device *d,
-				  struct device_attribute *attr,
-				  const char *buf, size_t count)
-{
-	struct iwl_priv *priv = (struct iwl_priv *)d->driver_data;
-	u32 filter_flags = simple_strtoul(buf, NULL, 0);
-
-	mutex_lock(&priv->mutex);
-	if (le32_to_cpu(priv->staging_rxon.filter_flags) != filter_flags) {
-		/* Cancel any currently running scans... */
-		if (iwl_scan_cancel_timeout(priv, 100))
-			IWL_WARNING("Could not cancel scan.\n");
-		else {
-			IWL_DEBUG_INFO("Committing rxon.filter_flags = "
-				       "0x%04X\n", filter_flags);
-			priv->staging_rxon.filter_flags =
-				cpu_to_le32(filter_flags);
-			iwl4965_commit_rxon(priv);
-		}
-	}
-	mutex_unlock(&priv->mutex);
-
-	return count;
-}
-
-static DEVICE_ATTR(filter_flags, S_IWUSR | S_IRUGO, show_filter_flags,
-		   store_filter_flags);
-
-#ifdef CONFIG_IWL4965_SPECTRUM_MEASUREMENT
-
-static ssize_t show_measurement(struct device *d,
-				struct device_attribute *attr, char *buf)
-{
-	struct iwl_priv *priv = dev_get_drvdata(d);
-	struct iwl4965_spectrum_notification measure_report;
-	u32 size = sizeof(measure_report), len = 0, ofs = 0;
-	u8 *data = (u8 *) & measure_report;
-	unsigned long flags;
-
-	spin_lock_irqsave(&priv->lock, flags);
-	if (!(priv->measurement_status & MEASUREMENT_READY)) {
-		spin_unlock_irqrestore(&priv->lock, flags);
-		return 0;
-	}
-	memcpy(&measure_report, &priv->measure_report, size);
-	priv->measurement_status = 0;
-	spin_unlock_irqrestore(&priv->lock, flags);
-
-	while (size && (PAGE_SIZE - len)) {
-		hex_dump_to_buffer(data + ofs, size, 16, 1, buf + len,
-				   PAGE_SIZE - len, 1);
-		len = strlen(buf);
-		if (PAGE_SIZE - len)
-			buf[len++] = '\n';
-
-		ofs += 16;
-		size -= min(size, 16U);
-	}
-
-	return len;
-}
-
-static ssize_t store_measurement(struct device *d,
-				 struct device_attribute *attr,
-				 const char *buf, size_t count)
-{
-	struct iwl_priv *priv = dev_get_drvdata(d);
-	struct ieee80211_measurement_params params = {
-		.channel = le16_to_cpu(priv->active_rxon.channel),
-		.start_time = cpu_to_le64(priv->last_tsf),
-		.duration = cpu_to_le16(1),
-	};
-	u8 type = IWL_MEASURE_BASIC;
-	u8 buffer[32];
-	u8 channel;
-
-	if (count) {
-		char *p = buffer;
-		strncpy(buffer, buf, min(sizeof(buffer), count));
-		channel = simple_strtoul(p, NULL, 0);
-		if (channel)
-			params.channel = channel;
-
-		p = buffer;
-		while (*p && *p != ' ')
-			p++;
-		if (*p)
-			type = simple_strtoul(p + 1, NULL, 0);
-	}
-
-	IWL_DEBUG_INFO("Invoking measurement of type %d on "
-		       "channel %d (for '%s')\n", type, params.channel, buf);
-	iwl4965_get_measurement(priv, &params, type);
-
-	return count;
-}
-
-static DEVICE_ATTR(measurement, S_IRUSR | S_IWUSR,
-		   show_measurement, store_measurement);
-#endif /* CONFIG_IWL4965_SPECTRUM_MEASUREMENT */
-
-static ssize_t store_retry_rate(struct device *d,
-				struct device_attribute *attr,
-				const char *buf, size_t count)
-{
-	struct iwl_priv *priv = dev_get_drvdata(d);
-
-	priv->retry_rate = simple_strtoul(buf, NULL, 0);
-	if (priv->retry_rate <= 0)
-		priv->retry_rate = 1;
-
-	return count;
-}
-
-static ssize_t show_retry_rate(struct device *d,
-			       struct device_attribute *attr, char *buf)
-{
-	struct iwl_priv *priv = dev_get_drvdata(d);
-	return sprintf(buf, "%d", priv->retry_rate);
-}
-
-static DEVICE_ATTR(retry_rate, S_IWUSR | S_IRUSR, show_retry_rate,
-		   store_retry_rate);
-
-static ssize_t store_power_level(struct device *d,
-				 struct device_attribute *attr,
-				 const char *buf, size_t count)
-{
-	struct iwl_priv *priv = dev_get_drvdata(d);
-	int rc;
-	int mode;
-
-	mode = simple_strtoul(buf, NULL, 0);
-	mutex_lock(&priv->mutex);
-
-	if (!iwl_is_ready(priv)) {
-		rc = -EAGAIN;
-		goto out;
-	}
-
-	rc = iwl_power_set_user_mode(priv, mode);
-	if (rc) {
-		IWL_DEBUG_MAC80211("failed setting power mode.\n");
-		goto out;
-	}
-	rc = count;
-
- out:
-	mutex_unlock(&priv->mutex);
-	return rc;
-}
-
-#define MAX_WX_STRING 80
-
-/* Values are in microsecond */
-static const s32 timeout_duration[] = {
-	350000,
-	250000,
-	75000,
-	37000,
-	25000,
-};
-static const s32 period_duration[] = {
-	400000,
-	700000,
-	1000000,
-	1000000,
-	1000000
-};
-
-static ssize_t show_power_level(struct device *d,
-				struct device_attribute *attr, char *buf)
-{
-	struct iwl_priv *priv = dev_get_drvdata(d);
-	int level = priv->power_data.power_mode;
-	char *p = buf;
-
-	p += sprintf(p, "%d ", level);
-	switch (level) {
-	case IWL_POWER_MODE_CAM:
-	case IWL_POWER_AC:
-		p += sprintf(p, "(AC)");
-		break;
-	case IWL_POWER_BATTERY:
-		p += sprintf(p, "(BATTERY)");
-		break;
-	default:
-		p += sprintf(p,
-			     "(Timeout %dms, Period %dms)",
-			     timeout_duration[level - 1] / 1000,
-			     period_duration[level - 1] / 1000);
-	}
-/*
-	if (!(priv->power_mode & IWL_POWER_ENABLED))
-		p += sprintf(p, " OFF\n");
-	else
-		p += sprintf(p, " \n");
-*/
-	p += sprintf(p, " \n");
-	return (p - buf + 1);
-}
-
-static DEVICE_ATTR(power_level, S_IWUSR | S_IRUSR, show_power_level,
-		   store_power_level);
-
-static ssize_t show_channels(struct device *d,
-			     struct device_attribute *attr, char *buf)
-{
-
-	struct iwl_priv *priv = dev_get_drvdata(d);
-	struct ieee80211_channel *channels = NULL;
-	const struct ieee80211_supported_band *supp_band = NULL;
-	int len = 0, i;
-	int count = 0;
-
-	if (!test_bit(STATUS_GEO_CONFIGURED, &priv->status))
-		return -EAGAIN;
-
-	supp_band = iwl_get_hw_mode(priv, IEEE80211_BAND_2GHZ);
-	channels = supp_band->channels;
-	count = supp_band->n_channels;
-
-	len += sprintf(&buf[len],
-			"Displaying %d channels in 2.4GHz band "
-			"(802.11bg):\n", count);
-
-	for (i = 0; i < count; i++)
-		len += sprintf(&buf[len], "%d: %ddBm: BSS%s%s, %s.\n",
-				ieee80211_frequency_to_channel(
-				channels[i].center_freq),
-				channels[i].max_power,
-				channels[i].flags & IEEE80211_CHAN_RADAR ?
-				" (IEEE 802.11h required)" : "",
-				(!(channels[i].flags & IEEE80211_CHAN_NO_IBSS)
-				|| (channels[i].flags &
-				IEEE80211_CHAN_RADAR)) ? "" :
-				", IBSS",
-				channels[i].flags &
-				IEEE80211_CHAN_PASSIVE_SCAN ?
-				"passive only" : "active/passive");
-
-	supp_band = iwl_get_hw_mode(priv, IEEE80211_BAND_5GHZ);
-	channels = supp_band->channels;
-	count = supp_band->n_channels;
-
-	len += sprintf(&buf[len], "Displaying %d channels in 5.2GHz band "
-			"(802.11a):\n", count);
-
-	for (i = 0; i < count; i++)
-		len += sprintf(&buf[len], "%d: %ddBm: BSS%s%s, %s.\n",
-				ieee80211_frequency_to_channel(
-				channels[i].center_freq),
-				channels[i].max_power,
-				channels[i].flags & IEEE80211_CHAN_RADAR ?
-				" (IEEE 802.11h required)" : "",
-				((channels[i].flags & IEEE80211_CHAN_NO_IBSS)
-				|| (channels[i].flags &
-				IEEE80211_CHAN_RADAR)) ? "" :
-				", IBSS",
-				channels[i].flags &
-				IEEE80211_CHAN_PASSIVE_SCAN ?
-				"passive only" : "active/passive");
-
-	return len;
-}
-
-static DEVICE_ATTR(channels, S_IRUSR, show_channels, NULL);
-
-static ssize_t show_statistics(struct device *d,
-			       struct device_attribute *attr, char *buf)
-{
-	struct iwl_priv *priv = dev_get_drvdata(d);
-	u32 size = sizeof(struct iwl_notif_statistics);
-	u32 len = 0, ofs = 0;
-	u8 *data = (u8 *) & priv->statistics;
-	int rc = 0;
-
-	if (!iwl_is_alive(priv))
-		return -EAGAIN;
-
-	mutex_lock(&priv->mutex);
-	rc = iwl_send_statistics_request(priv, 0);
-	mutex_unlock(&priv->mutex);
-
-	if (rc) {
-		len = sprintf(buf,
-			      "Error sending statistics request: 0x%08X\n", rc);
-		return len;
-	}
-
-	while (size && (PAGE_SIZE - len)) {
-		hex_dump_to_buffer(data + ofs, size, 16, 1, buf + len,
-				   PAGE_SIZE - len, 1);
-		len = strlen(buf);
-		if (PAGE_SIZE - len)
-			buf[len++] = '\n';
-
-		ofs += 16;
-		size -= min(size, 16U);
-	}
-
-	return len;
-}
-
-static DEVICE_ATTR(statistics, S_IRUGO, show_statistics, NULL);
-
-static ssize_t show_status(struct device *d,
-			   struct device_attribute *attr, char *buf)
-{
-	struct iwl_priv *priv = (struct iwl_priv *)d->driver_data;
-	if (!iwl_is_alive(priv))
-		return -EAGAIN;
-	return sprintf(buf, "0x%08x\n", (int)priv->status);
-}
-
-static DEVICE_ATTR(status, S_IRUGO, show_status, NULL);
-
-/*****************************************************************************
- *
- * driver setup and teardown
- *
- *****************************************************************************/
-
-static void iwl_setup_deferred_work(struct iwl_priv *priv)
-{
-	priv->workqueue = create_workqueue(DRV_NAME);
-
-	init_waitqueue_head(&priv->wait_command_queue);
-
-	INIT_WORK(&priv->up, iwl4965_bg_up);
-	INIT_WORK(&priv->restart, iwl4965_bg_restart);
-	INIT_WORK(&priv->rx_replenish, iwl4965_bg_rx_replenish);
-	INIT_WORK(&priv->rf_kill, iwl4965_bg_rf_kill);
-	INIT_WORK(&priv->beacon_update, iwl4965_bg_beacon_update);
-	INIT_WORK(&priv->set_monitor, iwl4965_bg_set_monitor);
-	INIT_WORK(&priv->run_time_calib_work, iwl_bg_run_time_calib_work);
-	INIT_DELAYED_WORK(&priv->init_alive_start, iwl_bg_init_alive_start);
-	INIT_DELAYED_WORK(&priv->alive_start, iwl_bg_alive_start);
-
-	/* FIXME : remove when resolved PENDING */
-	INIT_WORK(&priv->scan_completed, iwl_bg_scan_completed);
-	iwl_setup_scan_deferred_work(priv);
-
-	if (priv->cfg->ops->lib->setup_deferred_work)
-		priv->cfg->ops->lib->setup_deferred_work(priv);
-
-	init_timer(&priv->statistics_periodic);
-	priv->statistics_periodic.data = (unsigned long)priv;
-	priv->statistics_periodic.function = iwl4965_bg_statistics_periodic;
-
-	tasklet_init(&priv->irq_tasklet, (void (*)(unsigned long))
-		     iwl4965_irq_tasklet, (unsigned long)priv);
-}
-
-static void iwl_cancel_deferred_work(struct iwl_priv *priv)
-{
-	if (priv->cfg->ops->lib->cancel_deferred_work)
-		priv->cfg->ops->lib->cancel_deferred_work(priv);
-
-	cancel_delayed_work_sync(&priv->init_alive_start);
-	cancel_delayed_work(&priv->scan_check);
-	cancel_delayed_work(&priv->alive_start);
-	cancel_work_sync(&priv->beacon_update);
-	del_timer_sync(&priv->statistics_periodic);
-}
-
-static struct attribute *iwl4965_sysfs_entries[] = {
-	&dev_attr_channels.attr,
-	&dev_attr_flags.attr,
-	&dev_attr_filter_flags.attr,
-#ifdef CONFIG_IWL4965_SPECTRUM_MEASUREMENT
-	&dev_attr_measurement.attr,
-#endif
-	&dev_attr_power_level.attr,
-	&dev_attr_retry_rate.attr,
-	&dev_attr_rs_window.attr,
-	&dev_attr_statistics.attr,
-	&dev_attr_status.attr,
-	&dev_attr_temperature.attr,
-	&dev_attr_tx_power.attr,
-#ifdef CONFIG_IWLWIFI_DEBUG
-	&dev_attr_debug_level.attr,
-#endif
-	&dev_attr_version.attr,
-
-	NULL
-};
-
-static struct attribute_group iwl4965_attribute_group = {
-	.name = NULL,		/* put in device directory */
-	.attrs = iwl4965_sysfs_entries,
-};
-
-static struct ieee80211_ops iwl4965_hw_ops = {
-	.tx = iwl4965_mac_tx,
-	.start = iwl4965_mac_start,
-	.stop = iwl4965_mac_stop,
-	.add_interface = iwl4965_mac_add_interface,
-	.remove_interface = iwl4965_mac_remove_interface,
-	.config = iwl4965_mac_config,
-	.config_interface = iwl4965_mac_config_interface,
-	.configure_filter = iwl4965_configure_filter,
-	.set_key = iwl4965_mac_set_key,
-	.update_tkip_key = iwl4965_mac_update_tkip_key,
-	.get_stats = iwl4965_mac_get_stats,
-	.get_tx_stats = iwl4965_mac_get_tx_stats,
-	.conf_tx = iwl4965_mac_conf_tx,
-	.reset_tsf = iwl4965_mac_reset_tsf,
-	.bss_info_changed = iwl4965_bss_info_changed,
-	.ampdu_action = iwl4965_mac_ampdu_action,
-	.hw_scan = iwl4965_mac_hw_scan
-};
-
-static int iwl4965_pci_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
-{
-	int err = 0;
-	struct iwl_priv *priv;
-	struct ieee80211_hw *hw;
-	struct iwl_cfg *cfg = (struct iwl_cfg *)(ent->driver_data);
-	unsigned long flags;
-	DECLARE_MAC_BUF(mac);
-
-	/************************
-	 * 1. Allocating HW data
-	 ************************/
-
-	/* Disabling hardware scan means that mac80211 will perform scans
-	 * "the hard way", rather than using device's scan. */
-	if (cfg->mod_params->disable_hw_scan) {
-		if (cfg->mod_params->debug & IWL_DL_INFO)
-			dev_printk(KERN_DEBUG, &(pdev->dev),
-				   "Disabling hw_scan\n");
-		iwl4965_hw_ops.hw_scan = NULL;
-	}
-
-	hw = iwl_alloc_all(cfg, &iwl4965_hw_ops);
-	if (!hw) {
-		err = -ENOMEM;
-		goto out;
-	}
-	priv = hw->priv;
-	/* At this point both hw and priv are allocated. */
-
-	SET_IEEE80211_DEV(hw, &pdev->dev);
-
-	IWL_DEBUG_INFO("*** LOAD DRIVER ***\n");
-	priv->cfg = cfg;
-	priv->pci_dev = pdev;
-
-#ifdef CONFIG_IWLWIFI_DEBUG
-	priv->debug_level = priv->cfg->mod_params->debug;
-	atomic_set(&priv->restrict_refcnt, 0);
-#endif
-
-	/**************************
-	 * 2. Initializing PCI bus
-	 **************************/
-	if (pci_enable_device(pdev)) {
-		err = -ENODEV;
-		goto out_ieee80211_free_hw;
-	}
-
-	pci_set_master(pdev);
-
-	err = pci_set_dma_mask(pdev, DMA_64BIT_MASK);
-	if (!err)
-		err = pci_set_consistent_dma_mask(pdev, DMA_64BIT_MASK);
-	if (err) {
-		err = pci_set_dma_mask(pdev, DMA_32BIT_MASK);
-		if (!err)
-			err = pci_set_consistent_dma_mask(pdev, DMA_32BIT_MASK);
-		/* both attempts failed: */
-		if (err) {
-			printk(KERN_WARNING "%s: No suitable DMA available.\n",
-				DRV_NAME);
-			goto out_pci_disable_device;
-		}
-	}
-
-	err = pci_request_regions(pdev, DRV_NAME);
-	if (err)
-		goto out_pci_disable_device;
-
-	pci_set_drvdata(pdev, priv);
-
-	/* We disable the RETRY_TIMEOUT register (0x41) to keep
-	 * PCI Tx retries from interfering with C3 CPU state */
-	pci_write_config_byte(pdev, 0x41, 0x00);
-
-	/***********************
-	 * 3. Read REV register
-	 ***********************/
-	priv->hw_base = pci_iomap(pdev, 0, 0);
-	if (!priv->hw_base) {
-		err = -ENODEV;
-		goto out_pci_release_regions;
-	}
-
-	IWL_DEBUG_INFO("pci_resource_len = 0x%08llx\n",
-		(unsigned long long) pci_resource_len(pdev, 0));
-	IWL_DEBUG_INFO("pci_resource_base = %p\n", priv->hw_base);
-
-	iwl_hw_detect(priv);
-	printk(KERN_INFO DRV_NAME
-		": Detected Intel Wireless WiFi Link %s REV=0x%X\n",
-		priv->cfg->name, priv->hw_rev);
-
-	/* amp init */
-	err = priv->cfg->ops->lib->apm_ops.init(priv);
-	if (err < 0) {
-		IWL_DEBUG_INFO("Failed to init APMG\n");
-		goto out_iounmap;
-	}
-	/*****************
-	 * 4. Read EEPROM
-	 *****************/
-	/* Read the EEPROM */
-	err = iwl_eeprom_init(priv);
-	if (err) {
-		IWL_ERROR("Unable to init EEPROM\n");
-		goto out_iounmap;
-	}
-	err = iwl_eeprom_check_version(priv);
-	if (err)
-		goto out_iounmap;
-
-	/* extract MAC Address */
-	iwl_eeprom_get_mac(priv, priv->mac_addr);
-	IWL_DEBUG_INFO("MAC address: %s\n", print_mac(mac, priv->mac_addr));
-	SET_IEEE80211_PERM_ADDR(priv->hw, priv->mac_addr);
-
-	/************************
-	 * 5. Setup HW constants
-	 ************************/
-	if (iwl_set_hw_params(priv)) {
-		IWL_ERROR("failed to set hw parameters\n");
-		goto out_free_eeprom;
-	}
-
-	/*******************
-	 * 6. Setup priv
-	 *******************/
-
-	err = iwl_init_drv(priv);
-	if (err)
-		goto out_free_eeprom;
-	/* At this point both hw and priv are initialized. */
-
-	/**********************************
-	 * 7. Initialize module parameters
-	 **********************************/
-
-	/* Disable radio (SW RF KILL) via parameter when loading driver */
-	if (priv->cfg->mod_params->disable) {
-		set_bit(STATUS_RF_KILL_SW, &priv->status);
-		IWL_DEBUG_INFO("Radio disabled.\n");
-	}
-
-	/********************
-	 * 8. Setup services
-	 ********************/
-	spin_lock_irqsave(&priv->lock, flags);
-	iwl4965_disable_interrupts(priv);
-	spin_unlock_irqrestore(&priv->lock, flags);
-
-	err = sysfs_create_group(&pdev->dev.kobj, &iwl4965_attribute_group);
-	if (err) {
-		IWL_ERROR("failed to create sysfs device attributes\n");
-		goto out_uninit_drv;
-	}
-
-
-	iwl_setup_deferred_work(priv);
-	iwl_setup_rx_handlers(priv);
-
-	/********************
-	 * 9. Conclude
-	 ********************/
-	pci_save_state(pdev);
-	pci_disable_device(pdev);
-
-	/**********************************
-	 * 10. Setup and register mac80211
-	 **********************************/
-
-	err = iwl_setup_mac(priv);
-	if (err)
-		goto out_remove_sysfs;
-
-	err = iwl_dbgfs_register(priv, DRV_NAME);
-	if (err)
-		IWL_ERROR("failed to create debugfs files\n");
-
-	err = iwl_rfkill_init(priv);
-	if (err)
-		IWL_ERROR("Unable to initialize RFKILL system. "
-				  "Ignoring error: %d\n", err);
-	iwl_power_initialize(priv);
-	return 0;
-
- out_remove_sysfs:
-	sysfs_remove_group(&pdev->dev.kobj, &iwl4965_attribute_group);
- out_uninit_drv:
-	iwl_uninit_drv(priv);
- out_free_eeprom:
-	iwl_eeprom_free(priv);
- out_iounmap:
-	pci_iounmap(pdev, priv->hw_base);
- out_pci_release_regions:
-	pci_release_regions(pdev);
-	pci_set_drvdata(pdev, NULL);
- out_pci_disable_device:
-	pci_disable_device(pdev);
- out_ieee80211_free_hw:
-	ieee80211_free_hw(priv->hw);
- out:
-	return err;
-}
-
-static void __devexit iwl4965_pci_remove(struct pci_dev *pdev)
-{
-	struct iwl_priv *priv = pci_get_drvdata(pdev);
-	unsigned long flags;
-
-	if (!priv)
-		return;
-
-	IWL_DEBUG_INFO("*** UNLOAD DRIVER ***\n");
-
-	iwl_dbgfs_unregister(priv);
-	sysfs_remove_group(&pdev->dev.kobj, &iwl4965_attribute_group);
-
-	if (priv->mac80211_registered) {
-		ieee80211_unregister_hw(priv->hw);
-		priv->mac80211_registered = 0;
-	}
-
-	set_bit(STATUS_EXIT_PENDING, &priv->status);
-
-	iwl4965_down(priv);
-
-	/* make sure we flush any pending irq or
-	 * tasklet for the driver
-	 */
-	spin_lock_irqsave(&priv->lock, flags);
-	iwl4965_disable_interrupts(priv);
-	spin_unlock_irqrestore(&priv->lock, flags);
-
-	iwl_synchronize_irq(priv);
-
-	iwl_rfkill_unregister(priv);
-	iwl4965_dealloc_ucode_pci(priv);
-
-	if (priv->rxq.bd)
-		iwl_rx_queue_free(priv, &priv->rxq);
-	iwl_hw_txq_ctx_free(priv);
-
-	iwl_clear_stations_table(priv);
-	iwl_eeprom_free(priv);
-
-
-	/*netif_stop_queue(dev); */
-	flush_workqueue(priv->workqueue);
-
-	/* ieee80211_unregister_hw calls iwl4965_mac_stop, which flushes
-	 * priv->workqueue... so we can't take down the workqueue
-	 * until now... */
-	destroy_workqueue(priv->workqueue);
-	priv->workqueue = NULL;
-
-	pci_iounmap(pdev, priv->hw_base);
-	pci_release_regions(pdev);
-	pci_disable_device(pdev);
-	pci_set_drvdata(pdev, NULL);
-
-	iwl_uninit_drv(priv);
-
-	if (priv->ibss_beacon)
-		dev_kfree_skb(priv->ibss_beacon);
-
-	ieee80211_free_hw(priv->hw);
-}
-
-#ifdef CONFIG_PM
-
-static int iwl4965_pci_suspend(struct pci_dev *pdev, pm_message_t state)
-{
-	struct iwl_priv *priv = pci_get_drvdata(pdev);
-
-	if (priv->is_open) {
-		set_bit(STATUS_IN_SUSPEND, &priv->status);
-		iwl4965_mac_stop(priv->hw);
-		priv->is_open = 1;
-	}
-
-	pci_set_power_state(pdev, PCI_D3hot);
-
-	return 0;
-}
-
-static int iwl4965_pci_resume(struct pci_dev *pdev)
-{
-	struct iwl_priv *priv = pci_get_drvdata(pdev);
-
-	pci_set_power_state(pdev, PCI_D0);
-
-	if (priv->is_open)
-		iwl4965_mac_start(priv->hw);
-
-	clear_bit(STATUS_IN_SUSPEND, &priv->status);
-	return 0;
-}
-
-#endif /* CONFIG_PM */
-
-/*****************************************************************************
- *
- * driver and module entry point
- *
- *****************************************************************************/
-
-/* Hardware specific file defines the PCI IDs table for that hardware module */
-static struct pci_device_id iwl_hw_card_ids[] = {
-	{IWL_PCI_DEVICE(0x4229, PCI_ANY_ID, iwl4965_agn_cfg)},
-	{IWL_PCI_DEVICE(0x4230, PCI_ANY_ID, iwl4965_agn_cfg)},
-#ifdef CONFIG_IWL5000
-	{IWL_PCI_DEVICE(0x4232, 0x1205, iwl5100_bg_cfg)},
-	{IWL_PCI_DEVICE(0x4232, 0x1305, iwl5100_bg_cfg)},
-	{IWL_PCI_DEVICE(0x4232, 0x1206, iwl5100_abg_cfg)},
-	{IWL_PCI_DEVICE(0x4232, 0x1306, iwl5100_abg_cfg)},
-	{IWL_PCI_DEVICE(0x4232, 0x1326, iwl5100_abg_cfg)},
-	{IWL_PCI_DEVICE(0x4237, 0x1216, iwl5100_abg_cfg)},
-	{IWL_PCI_DEVICE(0x4232, PCI_ANY_ID, iwl5100_agn_cfg)},
-	{IWL_PCI_DEVICE(0x4235, PCI_ANY_ID, iwl5300_agn_cfg)},
-	{IWL_PCI_DEVICE(0x4236, PCI_ANY_ID, iwl5300_agn_cfg)},
-	{IWL_PCI_DEVICE(0x4237, PCI_ANY_ID, iwl5100_agn_cfg)},
-	{IWL_PCI_DEVICE(0x423A, PCI_ANY_ID, iwl5350_agn_cfg)},
-#endif /* CONFIG_IWL5000 */
-	{0}
-};
-MODULE_DEVICE_TABLE(pci, iwl_hw_card_ids);
-
-static struct pci_driver iwl_driver = {
-	.name = DRV_NAME,
-	.id_table = iwl_hw_card_ids,
-	.probe = iwl4965_pci_probe,
-	.remove = __devexit_p(iwl4965_pci_remove),
-#ifdef CONFIG_PM
-	.suspend = iwl4965_pci_suspend,
-	.resume = iwl4965_pci_resume,
-#endif
-};
-
-static int __init iwl4965_init(void)
-{
-
-	int ret;
-	printk(KERN_INFO DRV_NAME ": " DRV_DESCRIPTION ", " DRV_VERSION "\n");
-	printk(KERN_INFO DRV_NAME ": " DRV_COPYRIGHT "\n");
-
-	ret = iwl4965_rate_control_register();
-	if (ret) {
-		IWL_ERROR("Unable to register rate control algorithm: %d\n", ret);
-		return ret;
-	}
-
-	ret = pci_register_driver(&iwl_driver);
-	if (ret) {
-		IWL_ERROR("Unable to initialize PCI module\n");
-		goto error_register;
-	}
-
-	return ret;
-
-error_register:
-	iwl4965_rate_control_unregister();
-	return ret;
-}
-
-static void __exit iwl4965_exit(void)
-{
-	pci_unregister_driver(&iwl_driver);
-	iwl4965_rate_control_unregister();
-}
-
-module_exit(iwl4965_exit);
-module_init(iwl4965_init);
diff --git a/drivers/net/wireless/libertas/if_cs.c b/drivers/net/wireless/libertas/if_cs.c
index 04d7a251e3f0..8941919001bb 100644
--- a/drivers/net/wireless/libertas/if_cs.c
+++ b/drivers/net/wireless/libertas/if_cs.c
@@ -595,7 +595,7 @@ static int if_cs_prog_helper(struct if_cs_card *card)
 		if (ret < 0) {
 			lbs_pr_err("can't download helper at 0x%x, ret %d\n",
 				sent, ret);
-			goto done;
+			goto err_release;
 		}
 
 		if (count == 0)
@@ -604,9 +604,8 @@ static int if_cs_prog_helper(struct if_cs_card *card)
 		sent += count;
 	}
 
+err_release:
 	release_firmware(fw);
-	ret = 0;
-
 done:
 	lbs_deb_leave_args(LBS_DEB_CS, "ret %d", ret);
 	return ret;
@@ -676,14 +675,8 @@ static int if_cs_prog_real(struct if_cs_card *card)
 	}
 
 	ret = if_cs_poll_while_fw_download(card, IF_CS_SCRATCH, 0x5a);
-	if (ret < 0) {
+	if (ret < 0)
 		lbs_pr_err("firmware download failed\n");
-		goto err_release;
-	}
-
-	ret = 0;
-	goto done;
-
 
 err_release:
 	release_firmware(fw);
diff --git a/drivers/net/wireless/libertas/main.c b/drivers/net/wireless/libertas/main.c
index 14d5d61cec4c..bd32ac0b4e07 100644
--- a/drivers/net/wireless/libertas/main.c
+++ b/drivers/net/wireless/libertas/main.c
@@ -297,9 +297,7 @@ static ssize_t lbs_rtap_set(struct device *dev,
 			lbs_add_rtap(priv);
 		}
 		priv->monitormode = monitor_mode;
-	}
-
-	else {
+	} else {
 		if (!priv->monitormode)
 			return strlen(buf);
 		priv->monitormode = 0;
@@ -1242,8 +1240,6 @@ int lbs_start_card(struct lbs_private *priv)
 		lbs_pr_err("cannot register ethX device\n");
 		goto done;
 	}
-	if (device_create_file(&dev->dev, &dev_attr_lbs_rtap))
-		lbs_pr_err("cannot register lbs_rtap attribute\n");
 
 	lbs_update_channel(priv);
 
@@ -1275,6 +1271,13 @@ int lbs_start_card(struct lbs_private *priv)
 
 			if (device_create_file(&dev->dev, &dev_attr_lbs_mesh))
 				lbs_pr_err("cannot register lbs_mesh attribute\n");
+
+			/* While rtap isn't related to mesh, only mesh-enabled
+			 * firmware implements the rtap functionality via
+			 * CMD_802_11_MONITOR_MODE.
+			 */
+			if (device_create_file(&dev->dev, &dev_attr_lbs_rtap))
+				lbs_pr_err("cannot register lbs_rtap attribute\n");
 		}
 	}
 
@@ -1306,9 +1309,9 @@ void lbs_stop_card(struct lbs_private *priv)
 	netif_carrier_off(priv->dev);
 
 	lbs_debugfs_remove_one(priv);
-	device_remove_file(&dev->dev, &dev_attr_lbs_rtap);
 	if (priv->mesh_tlv) {
 		device_remove_file(&dev->dev, &dev_attr_lbs_mesh);
+		device_remove_file(&dev->dev, &dev_attr_lbs_rtap);
 	}
 
 	/* Flush pending command nodes */
diff --git a/drivers/net/wireless/libertas/persistcfg.c b/drivers/net/wireless/libertas/persistcfg.c
index 6d0ff8decaf7..3309a9c3cfef 100644
--- a/drivers/net/wireless/libertas/persistcfg.c
+++ b/drivers/net/wireless/libertas/persistcfg.c
@@ -48,7 +48,7 @@ static ssize_t bootflag_get(struct device *dev,
 	if (ret)
 		return ret;
 
-	return snprintf(buf, 12, "0x%x\n", le32_to_cpu(defs.bootflag));
+	return snprintf(buf, 12, "%d\n", le32_to_cpu(defs.bootflag));
 }
 
 /**
@@ -63,8 +63,8 @@ static ssize_t bootflag_set(struct device *dev, struct device_attribute *attr,
 	int ret;
 
 	memset(&cmd, 0, sizeof(cmd));
-	ret = sscanf(buf, "%x", &datum);
-	if (ret != 1)
+	ret = sscanf(buf, "%d", &datum);
+	if ((ret != 1) || (datum > 1))
 		return -EINVAL;
 
 	*((__le32 *)&cmd.data[0]) = cpu_to_le32(!!datum);
@@ -91,7 +91,7 @@ static ssize_t boottime_get(struct device *dev,
 	if (ret)
 		return ret;
 
-	return snprintf(buf, 12, "0x%x\n", defs.boottime);
+	return snprintf(buf, 12, "%d\n", defs.boottime);
 }
 
 /**
@@ -106,8 +106,8 @@ static ssize_t boottime_set(struct device *dev,
 	int ret;
 
 	memset(&cmd, 0, sizeof(cmd));
-	ret = sscanf(buf, "%x", &datum);
-	if (ret != 1)
+	ret = sscanf(buf, "%d", &datum);
+	if ((ret != 1) || (datum > 255))
 		return -EINVAL;
 
 	/* A too small boot time will result in the device booting into
@@ -143,7 +143,7 @@ static ssize_t channel_get(struct device *dev,
 	if (ret)
 		return ret;
 
-	return snprintf(buf, 12, "0x%x\n", le16_to_cpu(defs.channel));
+	return snprintf(buf, 12, "%d\n", le16_to_cpu(defs.channel));
 }
 
 /**
@@ -154,11 +154,11 @@ static ssize_t channel_set(struct device *dev, struct device_attribute *attr,
 {
 	struct lbs_private *priv = to_net_dev(dev)->priv;
 	struct cmd_ds_mesh_config cmd;
-	uint16_t datum;
+	uint32_t datum;
 	int ret;
 
 	memset(&cmd, 0, sizeof(cmd));
-	ret = sscanf(buf, "%hx", &datum);
+	ret = sscanf(buf, "%d", &datum);
 	if (ret != 1 || datum < 1 || datum > 11)
 		return -EINVAL;
 
@@ -274,8 +274,8 @@ static ssize_t protocol_id_set(struct device *dev,
 	int ret;
 
 	memset(&cmd, 0, sizeof(cmd));
-	ret = sscanf(buf, "%x", &datum);
-	if (ret != 1)
+	ret = sscanf(buf, "%d", &datum);
+	if ((ret != 1) || (datum > 255))
 		return -EINVAL;
 
 	/* fetch all other Information Element parameters */
@@ -328,8 +328,8 @@ static ssize_t metric_id_set(struct device *dev, struct device_attribute *attr,
 	int ret;
 
 	memset(&cmd, 0, sizeof(cmd));
-	ret = sscanf(buf, "%x", &datum);
-	if (ret != 1)
+	ret = sscanf(buf, "%d", &datum);
+	if ((ret != 1) || (datum > 255))
 		return -EINVAL;
 
 	/* fetch all other Information Element parameters */
@@ -382,8 +382,8 @@ static ssize_t capability_set(struct device *dev, struct device_attribute *attr,
 	int ret;
 
 	memset(&cmd, 0, sizeof(cmd));
-	ret = sscanf(buf, "%x", &datum);
-	if (ret != 1)
+	ret = sscanf(buf, "%d", &datum);
+	if ((ret != 1) || (datum > 255))
 		return -EINVAL;
 
 	/* fetch all other Information Element parameters */
diff --git a/drivers/net/wireless/mac80211_hwsim.c b/drivers/net/wireless/mac80211_hwsim.c
index 5816230d58f8..248d31a7aa33 100644
--- a/drivers/net/wireless/mac80211_hwsim.c
+++ b/drivers/net/wireless/mac80211_hwsim.c
@@ -500,7 +500,7 @@ failed_hw:
 	device_unregister(data->dev);
 failed_drvdata:
 	ieee80211_free_hw(hw);
-	hwsim_radios[i] = 0;
+	hwsim_radios[i] = NULL;
 failed:
 	mac80211_hwsim_free();
 	return err;
diff --git a/drivers/net/wireless/orinoco.c b/drivers/net/wireless/orinoco.c
index b047306bf386..36c004e15602 100644
--- a/drivers/net/wireless/orinoco.c
+++ b/drivers/net/wireless/orinoco.c
@@ -1970,6 +1970,9 @@ __orinoco_set_multicast_list(struct net_device *dev)
 			priv->promiscuous = promisc;
 	}
 
+	/* If we're not in promiscuous mode, then we need to set the
+	 * group address if either we want to multicast, or if we were
+	 * multicasting and want to stop */
 	if (! promisc && (mc_count || priv->mc_count) ) {
 		struct dev_mc_list *p = dev->mc_list;
 		struct hermes_multicast mclist;
@@ -1989,22 +1992,16 @@ __orinoco_set_multicast_list(struct net_device *dev)
 			printk(KERN_WARNING "%s: Multicast list is "
 			       "longer than mc_count\n", dev->name);
 
-		err = hermes_write_ltv(hw, USER_BAP, HERMES_RID_CNFGROUPADDRESSES,
-				       HERMES_BYTES_TO_RECLEN(priv->mc_count * ETH_ALEN),
-				       &mclist);
+		err = hermes_write_ltv(hw, USER_BAP,
+				   HERMES_RID_CNFGROUPADDRESSES,
+				   HERMES_BYTES_TO_RECLEN(mc_count * ETH_ALEN),
+				   &mclist);
 		if (err)
 			printk(KERN_ERR "%s: Error %d setting multicast list.\n",
 			       dev->name, err);
 		else
 			priv->mc_count = mc_count;
 	}
-
-	/* Since we can set the promiscuous flag when it wasn't asked
-	   for, make sure the net_device knows about it. */
-	if (priv->promiscuous)
-		dev->flags |= IFF_PROMISC;
-	else
-		dev->flags &= ~IFF_PROMISC;
 }
 
 /* This must be called from user context, without locks held - use
diff --git a/drivers/net/wireless/p54/p54.h b/drivers/net/wireless/p54/p54.h
index c6f27b9022f9..4801a363507b 100644
--- a/drivers/net/wireless/p54/p54.h
+++ b/drivers/net/wireless/p54/p54.h
@@ -52,6 +52,8 @@ struct p54_common {
 	int (*open)(struct ieee80211_hw *dev);
 	void (*stop)(struct ieee80211_hw *dev);
 	int mode;
+	u16 seqno;
+	struct mutex conf_mutex;
 	u8 mac_addr[ETH_ALEN];
 	u8 bssid[ETH_ALEN];
 	struct pda_iq_autocal_entry *iq_autocal;
diff --git a/drivers/net/wireless/p54/p54common.c b/drivers/net/wireless/p54/p54common.c
index ffaf7a6b6810..29be3dc8ee09 100644
--- a/drivers/net/wireless/p54/p54common.c
+++ b/drivers/net/wireless/p54/p54common.c
@@ -413,12 +413,12 @@ static void p54_rx_frame_sent(struct ieee80211_hw *dev, struct sk_buff *skb)
 			last_addr = range->end_addr;
 			__skb_unlink(entry, &priv->tx_queue);
 			memset(&info->status, 0, sizeof(info->status));
-			priv->tx_stats[skb_get_queue_mapping(skb)].len--;
 			entry_hdr = (struct p54_control_hdr *) entry->data;
 			entry_data = (struct p54_tx_control_allocdata *) entry_hdr->data;
 			if ((entry_hdr->magic1 & cpu_to_le16(0x4000)) != 0)
 				pad = entry_data->align[0];
 
+			priv->tx_stats[entry_data->hw_queue - 4].len--;
 			if (!(info->flags & IEEE80211_TX_CTL_NO_ACK)) {
 				if (!(payload->status & 0x01))
 					info->flags |= IEEE80211_TX_STAT_ACK;
@@ -553,9 +553,11 @@ static int p54_tx(struct ieee80211_hw *dev, struct sk_buff *skb)
 	struct ieee80211_tx_queue_stats *current_queue;
 	struct p54_common *priv = dev->priv;
 	struct p54_control_hdr *hdr;
+	struct ieee80211_hdr *ieee80211hdr = (struct ieee80211_hdr *)skb->data;
 	struct p54_tx_control_allocdata *txhdr;
 	size_t padding, len;
 	u8 rate;
+	u8 cts_rate = 0x20;
 
 	current_queue = &priv->tx_stats[skb_get_queue_mapping(skb)];
 	if (unlikely(current_queue->len > current_queue->limit))
@@ -580,31 +582,44 @@ static int p54_tx(struct ieee80211_hw *dev, struct sk_buff *skb)
 	hdr->type = (info->flags & IEEE80211_TX_CTL_NO_ACK) ? 0 : cpu_to_le16(1);
 	hdr->retry1 = hdr->retry2 = info->control.retry_limit;
 
-	memset(txhdr->wep_key, 0x0, 16);
-	txhdr->padding = 0;
-	txhdr->padding2 = 0;
-
 	/* TODO: add support for alternate retry TX rates */
 	rate = ieee80211_get_tx_rate(dev, info)->hw_value;
-	if (info->flags & IEEE80211_TX_CTL_SHORT_PREAMBLE)
+	if (info->flags & IEEE80211_TX_CTL_SHORT_PREAMBLE) {
 		rate |= 0x10;
-	if (info->flags & IEEE80211_TX_CTL_USE_RTS_CTS)
+		cts_rate |= 0x10;
+	}
+	if (info->flags & IEEE80211_TX_CTL_USE_RTS_CTS) {
 		rate |= 0x40;
-	else if (info->flags & IEEE80211_TX_CTL_USE_CTS_PROTECT)
+		cts_rate |= ieee80211_get_rts_cts_rate(dev, info)->hw_value;
+	} else if (info->flags & IEEE80211_TX_CTL_USE_CTS_PROTECT) {
 		rate |= 0x20;
+		cts_rate |= ieee80211_get_rts_cts_rate(dev, info)->hw_value;
+	}
 	memset(txhdr->rateset, rate, 8);
-	txhdr->wep_key_present = 0;
-	txhdr->wep_key_len = 0;
-	txhdr->frame_type = cpu_to_le32(skb_get_queue_mapping(skb) + 4);
-	txhdr->magic4 = 0;
-	txhdr->antenna = (info->antenna_sel_tx == 0) ?
+	txhdr->key_type = 0;
+	txhdr->key_len = 0;
+	txhdr->hw_queue = skb_get_queue_mapping(skb) + 4;
+	txhdr->tx_antenna = (info->antenna_sel_tx == 0) ?
 		2 : info->antenna_sel_tx - 1;
 	txhdr->output_power = 0x7f; // HW Maximum
-	txhdr->magic5 = (info->flags & IEEE80211_TX_CTL_NO_ACK) ?
-		0 : ((rate > 0x3) ? cpu_to_le32(0x33) : cpu_to_le32(0x23));
+	txhdr->cts_rate = (info->flags & IEEE80211_TX_CTL_NO_ACK) ?
+			  0 : cts_rate;
 	if (padding)
 		txhdr->align[0] = padding;
 
+	/* FIXME: The sequence that follows is needed for this driver to
+	 * work with mac80211 since "mac80211: fix TX sequence numbers".
+	 * As with the temporary code in rt2x00, changes will be needed
+	 * to get proper sequence numbers on beacons. In addition, this
+	 * patch places the sequence number in the hardware state, which
+	 * limits us to a single virtual state.
+	 */
+	if (info->flags & IEEE80211_TX_CTL_ASSIGN_SEQ) {
+		if (info->flags & IEEE80211_TX_CTL_FIRST_FRAGMENT)
+			priv->seqno += 0x10;
+		ieee80211hdr->seq_ctrl &= cpu_to_le16(IEEE80211_SCTL_FRAG);
+		ieee80211hdr->seq_ctrl |= cpu_to_le16(priv->seqno);
+	}
 	/* modifies skb->cb and with it info, so must be last! */
 	p54_assign_address(dev, skb, hdr, skb->len);
 
@@ -803,8 +818,8 @@ static void p54_set_vdcf(struct ieee80211_hw *dev)
 
 	if (dev->conf.flags & IEEE80211_CONF_SHORT_SLOT_TIME) {
 		vdcf->slottime = 9;
-		vdcf->magic1 = 0x00;
-		vdcf->magic2 = 0x10;
+		vdcf->magic1 = 0x10;
+		vdcf->magic2 = 0x00;
 	} else {
 		vdcf->slottime = 20;
 		vdcf->magic1 = 0x0a;
@@ -822,10 +837,21 @@ static int p54_start(struct ieee80211_hw *dev)
 	struct p54_common *priv = dev->priv;
 	int err;
 
+	if (!priv->cached_vdcf) {
+		priv->cached_vdcf = kzalloc(sizeof(struct p54_tx_control_vdcf)+
+			priv->tx_hdr_len + sizeof(struct p54_control_hdr),
+			GFP_KERNEL);
+
+		if (!priv->cached_vdcf)
+			return -ENOMEM;
+	}
+
 	err = priv->open(dev);
 	if (!err)
 		priv->mode = IEEE80211_IF_TYPE_MNTR;
 
+	p54_init_vdcf(dev);
+
 	return err;
 }
 
@@ -886,9 +912,12 @@ static void p54_remove_interface(struct ieee80211_hw *dev,
 static int p54_config(struct ieee80211_hw *dev, struct ieee80211_conf *conf)
 {
 	int ret;
+	struct p54_common *priv = dev->priv;
 
+	mutex_lock(&priv->conf_mutex);
 	ret = p54_set_freq(dev, cpu_to_le16(conf->channel->center_freq));
 	p54_set_vdcf(dev);
+	mutex_unlock(&priv->conf_mutex);
 	return ret;
 }
 
@@ -898,10 +927,12 @@ static int p54_config_interface(struct ieee80211_hw *dev,
 {
 	struct p54_common *priv = dev->priv;
 
+	mutex_lock(&priv->conf_mutex);
 	p54_set_filter(dev, 0, priv->mac_addr, conf->bssid, 0, 1, 0, 0xF642);
 	p54_set_filter(dev, 0, priv->mac_addr, conf->bssid, 2, 0, 0, 0);
 	p54_set_leds(dev, 1, !is_multicast_ether_addr(conf->bssid), 0);
 	memcpy(priv->bssid, conf->bssid, ETH_ALEN);
+	mutex_unlock(&priv->conf_mutex);
 	return 0;
 }
 
@@ -1000,15 +1031,7 @@ struct ieee80211_hw *p54_init_common(size_t priv_data_len)
 	dev->extra_tx_headroom = sizeof(struct p54_control_hdr) + 4 +
 				 sizeof(struct p54_tx_control_allocdata);
 
-        priv->cached_vdcf = kzalloc(sizeof(struct p54_tx_control_vdcf) +
-              priv->tx_hdr_len + sizeof(struct p54_control_hdr), GFP_KERNEL);
-
-	if (!priv->cached_vdcf) {
-		ieee80211_free_hw(dev);
-		return NULL;
-	}
-
-	p54_init_vdcf(dev);
+	mutex_init(&priv->conf_mutex);
 
 	return dev;
 }
diff --git a/drivers/net/wireless/p54/p54common.h b/drivers/net/wireless/p54/p54common.h
index 2245fcce92dc..8db6c0e8e540 100644
--- a/drivers/net/wireless/p54/p54common.h
+++ b/drivers/net/wireless/p54/p54common.h
@@ -183,16 +183,16 @@ struct p54_frame_sent_hdr {
 
 struct p54_tx_control_allocdata {
 	u8 rateset[8];
-	u16 padding;
-	u8 wep_key_present;
-	u8 wep_key_len;
-	u8 wep_key[16];
-	__le32 frame_type;
-	u32 padding2;
-	__le16 magic4;
-	u8 antenna;
+	u8 unalloc0[2];
+	u8 key_type;
+	u8 key_len;
+	u8 key[16];
+	u8 hw_queue;
+	u8 unalloc1[9];
+	u8 tx_antenna;
 	u8 output_power;
-	__le32 magic5;
+	u8 cts_rate;
+	u8 unalloc2[3];
 	u8 align[0];
 } __attribute__ ((packed));
 
diff --git a/drivers/net/wireless/p54/p54usb.c b/drivers/net/wireless/p54/p54usb.c
index 815c095ef797..cbaca23a9453 100644
--- a/drivers/net/wireless/p54/p54usb.c
+++ b/drivers/net/wireless/p54/p54usb.c
@@ -109,7 +109,17 @@ static void p54u_rx_cb(struct urb *urb)
 		urb->context = skb;
 		skb_queue_tail(&priv->rx_queue, skb);
 	} else {
+		if (!priv->hw_type)
+			skb_push(skb, sizeof(struct net2280_tx_hdr));
+
+		skb_reset_tail_pointer(skb);
 		skb_trim(skb, 0);
+		if (urb->transfer_buffer != skb_tail_pointer(skb)) {
+			/* this should not happen */
+			WARN_ON(1);
+			urb->transfer_buffer = skb_tail_pointer(skb);
+		}
+
 		skb_queue_tail(&priv->rx_queue, skb);
 	}
 
diff --git a/drivers/net/wireless/prism54/isl_ioctl.c b/drivers/net/wireless/prism54/isl_ioctl.c
index 97fa14e0a479..3d75a7137d3c 100644
--- a/drivers/net/wireless/prism54/isl_ioctl.c
+++ b/drivers/net/wireless/prism54/isl_ioctl.c
@@ -2518,7 +2518,7 @@ enum {
 
 #define PRISM2_HOSTAPD_MAX_BUF_SIZE 1024
 #define PRISM2_HOSTAPD_GENERIC_ELEMENT_HDR_LEN \
-((int) (&((struct prism2_hostapd_param *) 0)->u.generic_elem.data))
+	offsetof(struct prism2_hostapd_param, u.generic_elem.data)
 
 /* Maximum length for algorithm names (-1 for nul termination)
  * used in ioctl() */
diff --git a/drivers/net/wireless/rt2x00/rt2500pci.c b/drivers/net/wireless/rt2x00/rt2500pci.c
index aa6dfb811c71..181a146b4768 100644
--- a/drivers/net/wireless/rt2x00/rt2500pci.c
+++ b/drivers/net/wireless/rt2x00/rt2500pci.c
@@ -1220,6 +1220,7 @@ static void rt2500pci_write_tx_desc(struct rt2x00_dev *rt2x00dev,
 	rt2x00_set_field32(&word, TXD_W0_IFS, txdesc->ifs);
 	rt2x00_set_field32(&word, TXD_W0_RETRY_MODE,
 			   test_bit(ENTRY_TXD_RETRY_MODE, &txdesc->flags));
+	rt2x00_set_field32(&word, TXD_W0_DATABYTE_COUNT, skb->len);
 	rt2x00_set_field32(&word, TXD_W0_CIPHER_ALG, CIPHER_NONE);
 	rt2x00_desc_write(txd, 0, word);
 }
diff --git a/drivers/net/wireless/rt2x00/rt2500usb.c b/drivers/net/wireless/rt2x00/rt2500usb.c
index 3558cb210747..cd5af656932d 100644
--- a/drivers/net/wireless/rt2x00/rt2500usb.c
+++ b/drivers/net/wireless/rt2x00/rt2500usb.c
@@ -633,6 +633,16 @@ static void rt2500usb_reset_tuner(struct rt2x00_dev *rt2x00dev)
 	rt2x00dev->link.vgc_level = value;
 }
 
+/*
+ * NOTE: This function is directly ported from legacy driver, but
+ * despite it being declared it was never called. Although link tuning
+ * sounds like a good idea, and usually works well for the other drivers,
+ * it does _not_ work with rt2500usb. Enabling this function will result
+ * in TX capabilities only until association kicks in. Immediately
+ * after the successful association all TX frames will be kept in the
+ * hardware queue and never transmitted.
+ */
+#if 0
 static void rt2500usb_link_tuner(struct rt2x00_dev *rt2x00dev)
 {
 	int rssi = rt2x00_get_link_rssi(&rt2x00dev->link);
@@ -752,6 +762,9 @@ dynamic_cca_tune:
 		rt2x00dev->link.vgc_level = r17;
 	}
 }
+#else
+#define rt2500usb_link_tuner	NULL
+#endif
 
 /*
  * Initialization functions.
@@ -1121,6 +1134,7 @@ static void rt2500usb_write_beacon(struct queue_entry *entry)
 	int pipe = usb_sndbulkpipe(usb_dev, 1);
 	int length;
 	u16 reg;
+	u32 word, len;
 
 	/*
 	 * Add the descriptor in front of the skb.
@@ -1130,6 +1144,17 @@ static void rt2500usb_write_beacon(struct queue_entry *entry)
 	skbdesc->desc = entry->skb->data;
 
 	/*
+	 * Adjust the beacon databyte count. The current number is
+	 * calculated before this function gets called, but falsely
+	 * assumes that the descriptor was already present in the SKB.
+	 */
+	rt2x00_desc_read(skbdesc->desc, 0, &word);
+	len  = rt2x00_get_field32(word, TXD_W0_DATABYTE_COUNT);
+	len += skbdesc->desc_len;
+	rt2x00_set_field32(&word, TXD_W0_DATABYTE_COUNT, len);
+	rt2x00_desc_write(skbdesc->desc, 0, word);
+
+	/*
 	 * Disable beaconing while we are reloading the beacon data,
 	 * otherwise we might be sending out invalid data.
 	 */
@@ -1364,6 +1389,9 @@ static int rt2500usb_validate_eeprom(struct rt2x00_dev *rt2x00dev)
 		rt2x00_set_field16(&word, EEPROM_BBPTUNE_VGCLOWER, bbp);
 		rt2x00_eeprom_write(rt2x00dev, EEPROM_BBPTUNE_VGC, word);
 		EEPROM(rt2x00dev, "BBPtune vgc: 0x%04x\n", word);
+	} else {
+		rt2x00_set_field16(&word, EEPROM_BBPTUNE_VGCLOWER, bbp);
+		rt2x00_eeprom_write(rt2x00dev, EEPROM_BBPTUNE_VGC, word);
 	}
 
 	rt2x00_eeprom_read(rt2x00dev, EEPROM_BBPTUNE_R17, &word);
@@ -1372,9 +1400,6 @@ static int rt2500usb_validate_eeprom(struct rt2x00_dev *rt2x00dev)
 		rt2x00_set_field16(&word, EEPROM_BBPTUNE_R17_HIGH, 0x41);
 		rt2x00_eeprom_write(rt2x00dev, EEPROM_BBPTUNE_R17, word);
 		EEPROM(rt2x00dev, "BBPtune r17: 0x%04x\n", word);
-	} else {
-		rt2x00_set_field16(&word, EEPROM_BBPTUNE_VGCLOWER, bbp);
-		rt2x00_eeprom_write(rt2x00dev, EEPROM_BBPTUNE_VGC, word);
 	}
 
 	rt2x00_eeprom_read(rt2x00dev, EEPROM_BBPTUNE_R24, &word);
@@ -1650,7 +1675,6 @@ static void rt2500usb_probe_hw_mode(struct rt2x00_dev *rt2x00dev)
 	 * Initialize all hw fields.
 	 */
 	rt2x00dev->hw->flags =
-	    IEEE80211_HW_HOST_GEN_BEACON_TEMPLATE |
 	    IEEE80211_HW_RX_INCLUDES_FCS |
 	    IEEE80211_HW_HOST_BROADCAST_PS_BUFFERING |
 	    IEEE80211_HW_SIGNAL_DBM;
@@ -1726,6 +1750,7 @@ static int rt2500usb_probe_hw(struct rt2x00_dev *rt2x00dev)
 	__set_bit(DRIVER_REQUIRE_ATIM_QUEUE, &rt2x00dev->flags);
 	__set_bit(DRIVER_REQUIRE_BEACON_GUARD, &rt2x00dev->flags);
 	__set_bit(DRIVER_REQUIRE_SCHEDULED, &rt2x00dev->flags);
+	__set_bit(CONFIG_DISABLE_LINK_TUNING, &rt2x00dev->flags);
 
 	/*
 	 * Set the rssi offset.
diff --git a/drivers/net/wireless/rt2x00/rt2x00.h b/drivers/net/wireless/rt2x00/rt2x00.h
index 07b03b3c7ef1..8b10ea41b204 100644
--- a/drivers/net/wireless/rt2x00/rt2x00.h
+++ b/drivers/net/wireless/rt2x00/rt2x00.h
@@ -108,7 +108,10 @@
 #define SHORT_PIFS		( SIFS + SHORT_SLOT_TIME )
 #define DIFS			( PIFS + SLOT_TIME )
 #define SHORT_DIFS		( SHORT_PIFS + SHORT_SLOT_TIME )
-#define EIFS			( SIFS + (8 * (IEEE80211_HEADER + ACK_SIZE)) )
+#define EIFS			( SIFS + DIFS + \
+				  (8 * (IEEE80211_HEADER + ACK_SIZE)) )
+#define SHORT_EIFS		( SIFS + SHORT_DIFS + \
+				  (8 * (IEEE80211_HEADER + ACK_SIZE)) )
 
 /*
  * Chipset identification
@@ -365,6 +368,12 @@ struct rt2x00_intf {
 #define DELAYED_CONFIG_ERP		0x00000002
 #define DELAYED_LED_ASSOC		0x00000004
 
+	/*
+	 * Software sequence counter, this is only required
+	 * for hardware which doesn't support hardware
+	 * sequence counting.
+	 */
+	spinlock_t seqlock;
 	u16 seqno;
 };
 
@@ -597,6 +606,7 @@ enum rt2x00_flags {
 	DEVICE_STARTED_SUSPEND,
 	DEVICE_ENABLED_RADIO,
 	DEVICE_DISABLED_RADIO_HW,
+	DEVICE_DIRTY_CONFIG,
 
 	/*
 	 * Driver features
diff --git a/drivers/net/wireless/rt2x00/rt2x00config.c b/drivers/net/wireless/rt2x00/rt2x00config.c
index f20ca712504f..d134c3be539a 100644
--- a/drivers/net/wireless/rt2x00/rt2x00config.c
+++ b/drivers/net/wireless/rt2x00/rt2x00config.c
@@ -254,6 +254,8 @@ config:
 			libconf.ant.rx = default_ant->rx;
 		else if (active_ant->rx == ANTENNA_SW_DIVERSITY)
 			libconf.ant.rx = ANTENNA_B;
+		else
+			libconf.ant.rx = active_ant->rx;
 
 		if (conf->antenna_sel_tx)
 			libconf.ant.tx = conf->antenna_sel_tx;
@@ -261,6 +263,8 @@ config:
 			libconf.ant.tx = default_ant->tx;
 		else if (active_ant->tx == ANTENNA_SW_DIVERSITY)
 			libconf.ant.tx = ANTENNA_B;
+		else
+			libconf.ant.tx = active_ant->tx;
 	}
 
 	if (flags & CONFIG_UPDATE_SLOT_TIME) {
@@ -271,7 +275,7 @@ config:
 		libconf.sifs = SIFS;
 		libconf.pifs = short_slot_time ? SHORT_PIFS : PIFS;
 		libconf.difs = short_slot_time ? SHORT_DIFS : DIFS;
-		libconf.eifs = EIFS;
+		libconf.eifs = short_slot_time ? SHORT_EIFS : EIFS;
 	}
 
 	libconf.conf = conf;
diff --git a/drivers/net/wireless/rt2x00/rt2x00debug.c b/drivers/net/wireless/rt2x00/rt2x00debug.c
index 300cf061035f..6bee1d611bbf 100644
--- a/drivers/net/wireless/rt2x00/rt2x00debug.c
+++ b/drivers/net/wireless/rt2x00/rt2x00debug.c
@@ -372,9 +372,6 @@ static ssize_t rt2x00debug_write_##__name(struct file *file,	\
 	if (*offset)						\
 		return 0;					\
 								\
-	if (!capable(CAP_NET_ADMIN))				\
-		return -EPERM;					\
-								\
 	if (intf->offset_##__name >= debug->__name.word_count)	\
 		return -EINVAL;					\
 								\
@@ -454,7 +451,7 @@ static struct dentry *rt2x00debug_create_file_driver(const char *name,
 	data += sprintf(data, "compiled: %s %s\n", __DATE__, __TIME__);
 	blob->size = strlen(blob->data);
 
-	return debugfs_create_blob(name, S_IRUGO, intf->driver_folder, blob);
+	return debugfs_create_blob(name, S_IRUSR, intf->driver_folder, blob);
 }
 
 static struct dentry *rt2x00debug_create_file_chipset(const char *name,
@@ -482,7 +479,7 @@ static struct dentry *rt2x00debug_create_file_chipset(const char *name,
 	data += sprintf(data, "rf length: %d\n", debug->rf.word_count);
 	blob->size = strlen(blob->data);
 
-	return debugfs_create_blob(name, S_IRUGO, intf->driver_folder, blob);
+	return debugfs_create_blob(name, S_IRUSR, intf->driver_folder, blob);
 }
 
 void rt2x00debug_register(struct rt2x00_dev *rt2x00dev)
@@ -517,7 +514,7 @@ void rt2x00debug_register(struct rt2x00_dev *rt2x00dev)
 	if (IS_ERR(intf->chipset_entry))
 		goto exit;
 
-	intf->dev_flags = debugfs_create_file("dev_flags", S_IRUGO,
+	intf->dev_flags = debugfs_create_file("dev_flags", S_IRUSR,
 					      intf->driver_folder, intf,
 					      &rt2x00debug_fop_dev_flags);
 	if (IS_ERR(intf->dev_flags))
@@ -532,7 +529,7 @@ void rt2x00debug_register(struct rt2x00_dev *rt2x00dev)
 ({								\
 	(__intf)->__name##_off_entry =				\
 	    debugfs_create_u32(__stringify(__name) "_offset",	\
-			       S_IRUGO | S_IWUSR,		\
+			       S_IRUSR | S_IWUSR,		\
 			       (__intf)->register_folder,	\
 			       &(__intf)->offset_##__name);	\
 	if (IS_ERR((__intf)->__name##_off_entry))		\
@@ -540,7 +537,7 @@ void rt2x00debug_register(struct rt2x00_dev *rt2x00dev)
 								\
 	(__intf)->__name##_val_entry =				\
 	    debugfs_create_file(__stringify(__name) "_value",	\
-				S_IRUGO | S_IWUSR,		\
+				S_IRUSR | S_IWUSR,		\
 				(__intf)->register_folder,	\
 				(__intf), &rt2x00debug_fop_##__name);\
 	if (IS_ERR((__intf)->__name##_val_entry))		\
@@ -560,7 +557,7 @@ void rt2x00debug_register(struct rt2x00_dev *rt2x00dev)
 		goto exit;
 
 	intf->queue_frame_dump_entry =
-	    debugfs_create_file("dump", S_IRUGO, intf->queue_folder,
+	    debugfs_create_file("dump", S_IRUSR, intf->queue_folder,
 				intf, &rt2x00debug_fop_queue_dump);
 	if (IS_ERR(intf->queue_frame_dump_entry))
 		goto exit;
@@ -569,7 +566,7 @@ void rt2x00debug_register(struct rt2x00_dev *rt2x00dev)
 	init_waitqueue_head(&intf->frame_dump_waitqueue);
 
 	intf->queue_stats_entry =
-	    debugfs_create_file("queue", S_IRUGO, intf->queue_folder,
+	    debugfs_create_file("queue", S_IRUSR, intf->queue_folder,
 				intf, &rt2x00debug_fop_queue_stats);
 
 	return;
diff --git a/drivers/net/wireless/rt2x00/rt2x00dev.c b/drivers/net/wireless/rt2x00/rt2x00dev.c
index 8c93eb8353b0..f42283ad7b02 100644
--- a/drivers/net/wireless/rt2x00/rt2x00dev.c
+++ b/drivers/net/wireless/rt2x00/rt2x00dev.c
@@ -1013,6 +1013,7 @@ int rt2x00lib_start(struct rt2x00_dev *rt2x00dev)
 	rt2x00dev->intf_associated = 0;
 
 	__set_bit(DEVICE_STARTED, &rt2x00dev->flags);
+	__set_bit(DEVICE_DIRTY_CONFIG, &rt2x00dev->flags);
 
 	return 0;
 }
@@ -1237,9 +1238,9 @@ int rt2x00lib_resume(struct rt2x00_dev *rt2x00dev)
 	/*
 	 * Reconfigure device.
 	 */
-	rt2x00lib_config(rt2x00dev, &rt2x00dev->hw->conf, 1);
-	if (!rt2x00dev->hw->conf.radio_enabled)
-		rt2x00lib_disable_radio(rt2x00dev);
+	retval = rt2x00mac_config(rt2x00dev->hw, &rt2x00dev->hw->conf);
+	if (retval)
+		goto exit;
 
 	/*
 	 * Iterator over each active interface to
diff --git a/drivers/net/wireless/rt2x00/rt2x00lib.h b/drivers/net/wireless/rt2x00/rt2x00lib.h
index f2c9b0e79b5f..c5fb3a72cf37 100644
--- a/drivers/net/wireless/rt2x00/rt2x00lib.h
+++ b/drivers/net/wireless/rt2x00/rt2x00lib.h
@@ -125,13 +125,6 @@ void rt2x00queue_unmap_skb(struct rt2x00_dev *rt2x00dev, struct sk_buff *skb);
 void rt2x00queue_free_skb(struct rt2x00_dev *rt2x00dev, struct sk_buff *skb);
 
 /**
- * rt2x00queue_free_skb - free a skb
- * @rt2x00dev: Pointer to &struct rt2x00_dev.
- * @skb: The skb to free.
- */
-void rt2x00queue_free_skb(struct rt2x00_dev *rt2x00dev, struct sk_buff *skb);
-
-/**
  * rt2x00queue_write_tx_frame - Write TX frame to hardware
  * @queue: Queue over which the frame should be send
  * @skb: The skb to send
diff --git a/drivers/net/wireless/rt2x00/rt2x00mac.c b/drivers/net/wireless/rt2x00/rt2x00mac.c
index f1dcbaa80c3c..d06507388635 100644
--- a/drivers/net/wireless/rt2x00/rt2x00mac.c
+++ b/drivers/net/wireless/rt2x00/rt2x00mac.c
@@ -63,7 +63,7 @@ static int rt2x00mac_tx_rts_cts(struct rt2x00_dev *rt2x00dev,
 	 */
 	memcpy(skb->cb, frag_skb->cb, sizeof(skb->cb));
 	rts_info = IEEE80211_SKB_CB(skb);
-	rts_info->flags |= IEEE80211_TX_CTL_DO_NOT_ENCRYPT;
+	rts_info->control.hw_key = NULL;
 	rts_info->flags &= ~IEEE80211_TX_CTL_USE_RTS_CTS;
 	rts_info->flags &= ~IEEE80211_TX_CTL_USE_CTS_PROTECT;
 	rts_info->flags &= ~IEEE80211_TX_CTL_REQ_TX_STATUS;
@@ -83,6 +83,7 @@ static int rt2x00mac_tx_rts_cts(struct rt2x00_dev *rt2x00dev,
 				  (struct ieee80211_rts *)(skb->data));
 
 	if (rt2x00queue_write_tx_frame(queue, skb)) {
+		dev_kfree_skb_any(skb);
 		WARNING(rt2x00dev, "Failed to send RTS/CTS frame.\n");
 		return NETDEV_TX_BUSY;
 	}
@@ -96,7 +97,6 @@ int rt2x00mac_tx(struct ieee80211_hw *hw, struct sk_buff *skb)
 	struct ieee80211_tx_info *tx_info = IEEE80211_SKB_CB(skb);
 	struct ieee80211_hdr *ieee80211hdr = (struct ieee80211_hdr *)skb->data;
 	enum data_queue_qid qid = skb_get_queue_mapping(skb);
-	struct rt2x00_intf *intf = vif_to_intf(tx_info->control.vif);
 	struct data_queue *queue;
 	u16 frame_control;
 
@@ -152,18 +152,6 @@ int rt2x00mac_tx(struct ieee80211_hw *hw, struct sk_buff *skb)
 		}
 	}
 
-	/*
-	 * XXX: This is as wrong as the old mac80211 code was,
-	 *	due to beacons not getting sequence numbers assigned
-	 *	properly.
-	 */
-	if (tx_info->flags & IEEE80211_TX_CTL_ASSIGN_SEQ) {
-		if (tx_info->flags & IEEE80211_TX_CTL_FIRST_FRAGMENT)
-			intf->seqno += 0x10;
-		ieee80211hdr->seq_ctrl &= cpu_to_le16(IEEE80211_SCTL_FRAG);
-		ieee80211hdr->seq_ctrl |= cpu_to_le16(intf->seqno);
-	}
-
 	if (rt2x00queue_write_tx_frame(queue, skb)) {
 		ieee80211_stop_queue(rt2x00dev->hw, qid);
 		return NETDEV_TX_BUSY;
@@ -215,23 +203,43 @@ int rt2x00mac_add_interface(struct ieee80211_hw *hw,
 	    !test_bit(DEVICE_STARTED, &rt2x00dev->flags))
 		return -ENODEV;
 
-	/*
-	 * We don't support mixed combinations of sta and ap virtual
-	 * interfaces. We can only add this interface when the rival
-	 * interface count is 0.
-	 */
-	if ((conf->type == IEEE80211_IF_TYPE_AP && rt2x00dev->intf_sta_count) ||
-	    (conf->type != IEEE80211_IF_TYPE_AP && rt2x00dev->intf_ap_count))
-		return -ENOBUFS;
-
-	/*
-	 * Check if we exceeded the maximum amount of supported interfaces.
-	 */
-	if ((conf->type == IEEE80211_IF_TYPE_AP &&
-	     rt2x00dev->intf_ap_count >= rt2x00dev->ops->max_ap_intf) ||
-	    (conf->type != IEEE80211_IF_TYPE_AP &&
-	     rt2x00dev->intf_sta_count >= rt2x00dev->ops->max_sta_intf))
-		return -ENOBUFS;
+	switch (conf->type) {
+	case IEEE80211_IF_TYPE_AP:
+		/*
+		 * We don't support mixed combinations of
+		 * sta and ap interfaces.
+		 */
+		if (rt2x00dev->intf_sta_count)
+			return -ENOBUFS;
+
+		/*
+		 * Check if we exceeded the maximum amount
+		 * of supported interfaces.
+		 */
+		if (rt2x00dev->intf_ap_count >= rt2x00dev->ops->max_ap_intf)
+			return -ENOBUFS;
+
+		break;
+	case IEEE80211_IF_TYPE_STA:
+	case IEEE80211_IF_TYPE_IBSS:
+		/*
+		 * We don't support mixed combinations of
+		 * sta and ap interfaces.
+		 */
+		if (rt2x00dev->intf_ap_count)
+			return -ENOBUFS;
+
+		/*
+		 * Check if we exceeded the maximum amount
+		 * of supported interfaces.
+		 */
+		if (rt2x00dev->intf_sta_count >= rt2x00dev->ops->max_sta_intf)
+			return -ENOBUFS;
+
+		break;
+	default:
+		return -EINVAL;
+	}
 
 	/*
 	 * Loop through all beacon queues to find a free
@@ -259,6 +267,7 @@ int rt2x00mac_add_interface(struct ieee80211_hw *hw,
 		rt2x00dev->intf_sta_count++;
 
 	spin_lock_init(&intf->lock);
+	spin_lock_init(&intf->seqlock);
 	intf->beacon = entry;
 
 	if (conf->type == IEEE80211_IF_TYPE_AP)
@@ -322,6 +331,7 @@ EXPORT_SYMBOL_GPL(rt2x00mac_remove_interface);
 int rt2x00mac_config(struct ieee80211_hw *hw, struct ieee80211_conf *conf)
 {
 	struct rt2x00_dev *rt2x00dev = hw->priv;
+	int force_reconfig;
 
 	/*
 	 * Mac80211 might be calling this function while we are trying
@@ -341,7 +351,17 @@ int rt2x00mac_config(struct ieee80211_hw *hw, struct ieee80211_conf *conf)
 			rt2x00lib_toggle_rx(rt2x00dev, STATE_RADIO_RX_OFF);
 	}
 
-	rt2x00lib_config(rt2x00dev, conf, 0);
+	/*
+	 * When the DEVICE_DIRTY_CONFIG flag is set, the device has recently
+	 * been started and the configuration must be forced upon the hardware.
+	 * Otherwise registers will not be intialized correctly and could
+	 * result in non-working hardware because essential registers aren't
+	 * initialized.
+	 */
+	force_reconfig =
+	    __test_and_clear_bit(DEVICE_DIRTY_CONFIG, &rt2x00dev->flags);
+
+	rt2x00lib_config(rt2x00dev, conf, force_reconfig);
 
 	/*
 	 * Reenable RX only if the radio should be on.
diff --git a/drivers/net/wireless/rt2x00/rt2x00queue.c b/drivers/net/wireless/rt2x00/rt2x00queue.c
index 7f442030f5ad..898cdd7f57d9 100644
--- a/drivers/net/wireless/rt2x00/rt2x00queue.c
+++ b/drivers/net/wireless/rt2x00/rt2x00queue.c
@@ -120,6 +120,7 @@ static void rt2x00queue_create_tx_descriptor(struct queue_entry *entry,
 {
 	struct rt2x00_dev *rt2x00dev = entry->queue->rt2x00dev;
 	struct ieee80211_tx_info *tx_info = IEEE80211_SKB_CB(entry->skb);
+	struct rt2x00_intf *intf = vif_to_intf(tx_info->control.vif);
 	struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)entry->skb->data;
 	struct ieee80211_rate *rate =
 	    ieee80211_get_tx_rate(rt2x00dev->hw, tx_info);
@@ -127,6 +128,7 @@ static void rt2x00queue_create_tx_descriptor(struct queue_entry *entry,
 	unsigned int data_length;
 	unsigned int duration;
 	unsigned int residual;
+	unsigned long irqflags;
 
 	memset(txdesc, 0, sizeof(*txdesc));
 
@@ -200,6 +202,31 @@ static void rt2x00queue_create_tx_descriptor(struct queue_entry *entry,
 	}
 
 	/*
+	 * Hardware should insert sequence counter.
+	 * FIXME: We insert a software sequence counter first for
+	 * hardware that doesn't support hardware sequence counting.
+	 *
+	 * This is wrong because beacons are not getting sequence
+	 * numbers assigned properly.
+	 *
+	 * A secondary problem exists for drivers that cannot toggle
+	 * sequence counting per-frame, since those will override the
+	 * sequence counter given by mac80211.
+	 */
+	if (tx_info->flags & IEEE80211_TX_CTL_ASSIGN_SEQ) {
+		spin_lock_irqsave(&intf->seqlock, irqflags);
+
+		if (test_bit(ENTRY_TXD_FIRST_FRAGMENT, &txdesc->flags))
+			intf->seqno += 0x10;
+		hdr->seq_ctrl &= cpu_to_le16(IEEE80211_SCTL_FRAG);
+		hdr->seq_ctrl |= cpu_to_le16(intf->seqno);
+
+		spin_unlock_irqrestore(&intf->seqlock, irqflags);
+
+		__set_bit(ENTRY_TXD_GENERATE_SEQ, &txdesc->flags);
+	}
+
+	/*
 	 * PLCP setup
 	 * Length calculation depends on OFDM/CCK rate.
 	 */
@@ -466,9 +493,12 @@ void rt2x00queue_init_rx(struct rt2x00_dev *rt2x00dev)
 	if (!rt2x00dev->ops->lib->init_rxentry)
 		return;
 
-	for (i = 0; i < queue->limit; i++)
+	for (i = 0; i < queue->limit; i++) {
+		queue->entries[i].flags = 0;
+
 		rt2x00dev->ops->lib->init_rxentry(rt2x00dev,
 						  &queue->entries[i]);
+	}
 }
 
 void rt2x00queue_init_tx(struct rt2x00_dev *rt2x00dev)
@@ -482,9 +512,12 @@ void rt2x00queue_init_tx(struct rt2x00_dev *rt2x00dev)
 		if (!rt2x00dev->ops->lib->init_txentry)
 			continue;
 
-		for (i = 0; i < queue->limit; i++)
+		for (i = 0; i < queue->limit; i++) {
+			queue->entries[i].flags = 0;
+
 			rt2x00dev->ops->lib->init_txentry(rt2x00dev,
 							  &queue->entries[i]);
+		}
 	}
 }
 
diff --git a/drivers/net/wireless/rt2x00/rt2x00queue.h b/drivers/net/wireless/rt2x00/rt2x00queue.h
index 8945945c892e..ff78e52ce43c 100644
--- a/drivers/net/wireless/rt2x00/rt2x00queue.h
+++ b/drivers/net/wireless/rt2x00/rt2x00queue.h
@@ -173,10 +173,10 @@ struct rxdone_entry_desc {
  *	frame transmission failed due to excessive retries.
  */
 enum txdone_entry_desc_flags {
-	TXDONE_UNKNOWN = 1 << 0,
-	TXDONE_SUCCESS = 1 << 1,
-	TXDONE_FAILURE = 1 << 2,
-	TXDONE_EXCESSIVE_RETRY = 1 << 3,
+	TXDONE_UNKNOWN,
+	TXDONE_SUCCESS,
+	TXDONE_FAILURE,
+	TXDONE_EXCESSIVE_RETRY,
 };
 
 /**
@@ -199,6 +199,7 @@ struct txdone_entry_desc {
  * @ENTRY_TXD_RTS_FRAME: This frame is a RTS frame.
  * @ENTRY_TXD_CTS_FRAME: This frame is a CTS-to-self frame.
  * @ENTRY_TXD_OFDM_RATE: This frame is send out with an OFDM rate.
+ * @ENTRY_TXD_GENERATE_SEQ: This frame requires sequence counter.
  * @ENTRY_TXD_FIRST_FRAGMENT: This is the first frame.
  * @ENTRY_TXD_MORE_FRAG: This frame is followed by another fragment.
  * @ENTRY_TXD_REQ_TIMESTAMP: Require timestamp to be inserted.
@@ -210,6 +211,7 @@ enum txentry_desc_flags {
 	ENTRY_TXD_RTS_FRAME,
 	ENTRY_TXD_CTS_FRAME,
 	ENTRY_TXD_OFDM_RATE,
+	ENTRY_TXD_GENERATE_SEQ,
 	ENTRY_TXD_FIRST_FRAGMENT,
 	ENTRY_TXD_MORE_FRAG,
 	ENTRY_TXD_REQ_TIMESTAMP,
diff --git a/drivers/net/wireless/rt2x00/rt2x00reg.h b/drivers/net/wireless/rt2x00/rt2x00reg.h
index 7e88ce5651b9..2ea7866abd5d 100644
--- a/drivers/net/wireless/rt2x00/rt2x00reg.h
+++ b/drivers/net/wireless/rt2x00/rt2x00reg.h
@@ -136,7 +136,7 @@ struct rt2x00_field32 {
  */
 #define is_power_of_two(x)	( !((x) & ((x)-1)) )
 #define low_bit_mask(x)		( ((x)-1) & ~(x) )
-#define is_valid_mask(x)	is_power_of_two(1 + (x) + low_bit_mask(x))
+#define is_valid_mask(x)	is_power_of_two(1LU + (x) + low_bit_mask(x))
 
 /*
  * Macro's to find first set bit in a variable.
@@ -173,8 +173,7 @@ struct rt2x00_field32 {
  * does not exceed the given typelimit.
  */
 #define FIELD_CHECK(__mask, __type)			\
-	BUILD_BUG_ON(!__builtin_constant_p(__mask) ||	\
-		     !(__mask) ||			\
+	BUILD_BUG_ON(!(__mask) ||			\
 		     !is_valid_mask(__mask) ||		\
 		     (__mask) != (__type)(__mask))	\
 
diff --git a/drivers/net/wireless/rt2x00/rt2x00usb.c b/drivers/net/wireless/rt2x00/rt2x00usb.c
index 83862e7f7aec..2050227ea530 100644
--- a/drivers/net/wireless/rt2x00/rt2x00usb.c
+++ b/drivers/net/wireless/rt2x00/rt2x00usb.c
@@ -122,6 +122,38 @@ int rt2x00usb_vendor_request_buff(struct rt2x00_dev *rt2x00dev,
 }
 EXPORT_SYMBOL_GPL(rt2x00usb_vendor_request_buff);
 
+int rt2x00usb_vendor_request_large_buff(struct rt2x00_dev *rt2x00dev,
+					const u8 request, const u8 requesttype,
+					const u16 offset, const void *buffer,
+					const u16 buffer_length,
+					const int timeout)
+{
+	int status = 0;
+	unsigned char *tb;
+	u16 off, len, bsize;
+
+	mutex_lock(&rt2x00dev->usb_cache_mutex);
+
+	tb  = (char *)buffer;
+	off = offset;
+	len = buffer_length;
+	while (len && !status) {
+		bsize = min_t(u16, CSR_CACHE_SIZE, len);
+		status = rt2x00usb_vendor_req_buff_lock(rt2x00dev, request,
+							requesttype, off, tb,
+							bsize, timeout);
+
+		tb  += bsize;
+		len -= bsize;
+		off += bsize;
+	}
+
+	mutex_unlock(&rt2x00dev->usb_cache_mutex);
+
+	return status;
+}
+EXPORT_SYMBOL_GPL(rt2x00usb_vendor_request_large_buff);
+
 /*
  * TX data handlers.
  */
@@ -149,6 +181,7 @@ static void rt2x00usb_interrupt_txdone(struct urb *urb)
 	 * (Only indirectly by looking at the failed TX counters
 	 * in the register).
 	 */
+	txdesc.flags = 0;
 	if (!urb->status)
 		__set_bit(TXDONE_UNKNOWN, &txdesc.flags);
 	else
diff --git a/drivers/net/wireless/rt2x00/rt2x00usb.h b/drivers/net/wireless/rt2x00/rt2x00usb.h
index aad794adf52c..3b4a67417f95 100644
--- a/drivers/net/wireless/rt2x00/rt2x00usb.h
+++ b/drivers/net/wireless/rt2x00/rt2x00usb.h
@@ -70,8 +70,7 @@
 /*
  * Cache size
  */
-#define CSR_CACHE_SIZE			8
-#define CSR_CACHE_SIZE_FIRMWARE		64
+#define CSR_CACHE_SIZE			64
 
 /*
  * USB request types.
@@ -172,6 +171,25 @@ int rt2x00usb_vendor_req_buff_lock(struct rt2x00_dev *rt2x00dev,
 				   const u16 buffer_length, const int timeout);
 
 /**
+ * rt2x00usb_vendor_request_large_buff - Send register command to device (buffered)
+ * @rt2x00dev: Pointer to &struct rt2x00_dev
+ * @request: USB vendor command (See &enum rt2x00usb_vendor_request)
+ * @requesttype: Request type &USB_VENDOR_REQUEST_*
+ * @offset: Register start offset to perform action on
+ * @buffer: Buffer where information will be read/written to by device
+ * @buffer_length: Size of &buffer
+ * @timeout: Operation timeout
+ *
+ * This function is used to transfer register data in blocks larger
+ * then CSR_CACHE_SIZE. Use for firmware upload, keys and beacons.
+ */
+int rt2x00usb_vendor_request_large_buff(struct rt2x00_dev *rt2x00dev,
+					const u8 request, const u8 requesttype,
+					const u16 offset, const void *buffer,
+					const u16 buffer_length,
+					const int timeout);
+
+/**
  * rt2x00usb_vendor_request_sw - Send single register command to device
  * @rt2x00dev: Pointer to &struct rt2x00_dev
  * @request: USB vendor command (See &enum rt2x00usb_vendor_request)
diff --git a/drivers/net/wireless/rt2x00/rt61pci.c b/drivers/net/wireless/rt2x00/rt61pci.c
index f7c1f92c1448..087e90b328cd 100644
--- a/drivers/net/wireless/rt2x00/rt61pci.c
+++ b/drivers/net/wireless/rt2x00/rt61pci.c
@@ -1004,6 +1004,11 @@ static int rt61pci_load_firmware(struct rt2x00_dev *rt2x00dev, const void *data,
 	}
 
 	/*
+	 * Hardware needs another millisecond before it is ready.
+	 */
+	msleep(1);
+
+	/*
 	 * Reset MAC and BBP registers.
 	 */
 	reg = 0;
@@ -1544,7 +1549,8 @@ static void rt61pci_write_tx_desc(struct rt2x00_dev *rt2x00dev,
 	rt2x00_set_field32(&word, TXD_W1_CWMIN, txdesc->cw_min);
 	rt2x00_set_field32(&word, TXD_W1_CWMAX, txdesc->cw_max);
 	rt2x00_set_field32(&word, TXD_W1_IV_OFFSET, IEEE80211_HEADER);
-	rt2x00_set_field32(&word, TXD_W1_HW_SEQUENCE, 1);
+	rt2x00_set_field32(&word, TXD_W1_HW_SEQUENCE,
+			   test_bit(ENTRY_TXD_GENERATE_SEQ, &txdesc->flags));
 	rt2x00_set_field32(&word, TXD_W1_BUFFER_COUNT, 1);
 	rt2x00_desc_write(txd, 1, word);
 
@@ -2278,7 +2284,6 @@ static void rt61pci_probe_hw_mode(struct rt2x00_dev *rt2x00dev)
 	 * Initialize all hw fields.
 	 */
 	rt2x00dev->hw->flags =
-	    IEEE80211_HW_HOST_GEN_BEACON_TEMPLATE |
 	    IEEE80211_HW_HOST_BROADCAST_PS_BUFFERING |
 	    IEEE80211_HW_SIGNAL_DBM;
 	rt2x00dev->hw->extra_tx_headroom = 0;
diff --git a/drivers/net/wireless/rt2x00/rt73usb.c b/drivers/net/wireless/rt2x00/rt73usb.c
index d383735ab8f2..9761eaaa08be 100644
--- a/drivers/net/wireless/rt2x00/rt73usb.c
+++ b/drivers/net/wireless/rt2x00/rt73usb.c
@@ -890,9 +890,6 @@ static int rt73usb_load_firmware(struct rt2x00_dev *rt2x00dev, const void *data,
 	unsigned int i;
 	int status;
 	u32 reg;
-	const char *ptr = data;
-	char *cache;
-	int buflen;
 
 	/*
 	 * Wait for stable hardware.
@@ -911,31 +908,12 @@ static int rt73usb_load_firmware(struct rt2x00_dev *rt2x00dev, const void *data,
 
 	/*
 	 * Write firmware to device.
-	 * We setup a seperate cache for this action,
-	 * since we are going to write larger chunks of data
-	 * then normally used cache size.
 	 */
-	cache = kmalloc(CSR_CACHE_SIZE_FIRMWARE, GFP_KERNEL);
-	if (!cache) {
-		ERROR(rt2x00dev, "Failed to allocate firmware cache.\n");
-		return -ENOMEM;
-	}
-
-	for (i = 0; i < len; i += CSR_CACHE_SIZE_FIRMWARE) {
-		buflen = min_t(int, len - i, CSR_CACHE_SIZE_FIRMWARE);
-
-		memcpy(cache, ptr, buflen);
-
-		rt2x00usb_vendor_request(rt2x00dev, USB_MULTI_WRITE,
-					 USB_VENDOR_REQUEST_OUT,
-					 FIRMWARE_IMAGE_BASE + i, 0,
-					 cache, buflen,
-					 REGISTER_TIMEOUT32(buflen));
-
-		ptr += buflen;
-	}
-
-	kfree(cache);
+	rt2x00usb_vendor_request_large_buff(rt2x00dev, USB_MULTI_WRITE,
+					    USB_VENDOR_REQUEST_OUT,
+					    FIRMWARE_IMAGE_BASE,
+					    data, len,
+					    REGISTER_TIMEOUT32(len));
 
 	/*
 	 * Send firmware request to device to load firmware,
@@ -1303,7 +1281,8 @@ static void rt73usb_write_tx_desc(struct rt2x00_dev *rt2x00dev,
 	rt2x00_set_field32(&word, TXD_W1_CWMIN, txdesc->cw_min);
 	rt2x00_set_field32(&word, TXD_W1_CWMAX, txdesc->cw_max);
 	rt2x00_set_field32(&word, TXD_W1_IV_OFFSET, IEEE80211_HEADER);
-	rt2x00_set_field32(&word, TXD_W1_HW_SEQUENCE, 1);
+	rt2x00_set_field32(&word, TXD_W1_HW_SEQUENCE,
+			   test_bit(ENTRY_TXD_GENERATE_SEQ, &txdesc->flags));
 	rt2x00_desc_write(txd, 1, word);
 
 	rt2x00_desc_read(txd, 2, &word);
@@ -1352,6 +1331,7 @@ static void rt73usb_write_beacon(struct queue_entry *entry)
 	struct skb_frame_desc *skbdesc = get_skb_frame_desc(entry->skb);
 	unsigned int beacon_base;
 	u32 reg;
+	u32 word, len;
 
 	/*
 	 * Add the descriptor in front of the skb.
@@ -1361,6 +1341,17 @@ static void rt73usb_write_beacon(struct queue_entry *entry)
 	skbdesc->desc = entry->skb->data;
 
 	/*
+	 * Adjust the beacon databyte count. The current number is
+	 * calculated before this function gets called, but falsely
+	 * assumes that the descriptor was already present in the SKB.
+	 */
+	rt2x00_desc_read(skbdesc->desc, 0, &word);
+	len  = rt2x00_get_field32(word, TXD_W0_DATABYTE_COUNT);
+	len += skbdesc->desc_len;
+	rt2x00_set_field32(&word, TXD_W0_DATABYTE_COUNT, len);
+	rt2x00_desc_write(skbdesc->desc, 0, word);
+
+	/*
 	 * Disable beaconing while we are reloading the beacon data,
 	 * otherwise we might be sending out invalid data.
 	 */
@@ -1374,10 +1365,10 @@ static void rt73usb_write_beacon(struct queue_entry *entry)
 	 * Write entire beacon with descriptor to register.
 	 */
 	beacon_base = HW_BEACON_OFFSET(entry->entry_idx);
-	rt2x00usb_vendor_request(rt2x00dev, USB_MULTI_WRITE,
-				 USB_VENDOR_REQUEST_OUT, beacon_base, 0,
-				 entry->skb->data, entry->skb->len,
-				 REGISTER_TIMEOUT32(entry->skb->len));
+	rt2x00usb_vendor_request_large_buff(rt2x00dev, USB_MULTI_WRITE,
+					    USB_VENDOR_REQUEST_OUT, beacon_base,
+					    entry->skb->data, entry->skb->len,
+					    REGISTER_TIMEOUT32(entry->skb->len));
 
 	/*
 	 * Clean up the beacon skb.
@@ -1871,7 +1862,6 @@ static void rt73usb_probe_hw_mode(struct rt2x00_dev *rt2x00dev)
 	 * Initialize all hw fields.
 	 */
 	rt2x00dev->hw->flags =
-	    IEEE80211_HW_HOST_GEN_BEACON_TEMPLATE |
 	    IEEE80211_HW_HOST_BROADCAST_PS_BUFFERING |
 	    IEEE80211_HW_SIGNAL_DBM;
 	rt2x00dev->hw->extra_tx_headroom = TXD_DESC_SIZE;
diff --git a/drivers/net/wireless/rtl8187.h b/drivers/net/wireless/rtl8187.h
index 3afb49f8866a..5a9515c99960 100644
--- a/drivers/net/wireless/rtl8187.h
+++ b/drivers/net/wireless/rtl8187.h
@@ -47,11 +47,13 @@ struct rtl8187_rx_hdr {
 struct rtl8187b_rx_hdr {
 	__le32 flags;
 	__le64 mac_time;
-	u8 noise;
-	u8 signal;
+	u8 sq;
+	u8 rssi;
 	u8 agc;
-	u8 reserved;
-	__le32 unused;
+	u8 flags2;
+	__le16 snr_long2end;
+	s8 pwdb_g12;
+	u8 fot;
 } __attribute__((packed));
 
 /* {rtl8187,rtl8187b}_tx_info is in skb */
@@ -92,6 +94,10 @@ struct rtl8187_priv {
 	const struct rtl818x_rf_ops *rf;
 	struct ieee80211_vif *vif;
 	int mode;
+	/* The mutex protects the TX loopback state.
+	 * Any attempt to set channels concurrently locks the device.
+	 */
+	struct mutex conf_mutex;
 
 	/* rtl8187 specific */
 	struct ieee80211_channel channels[14];
@@ -100,6 +106,7 @@ struct rtl8187_priv {
 	struct usb_device *udev;
 	u32 rx_conf;
 	u16 txpwr_base;
+	u16 seqno;
 	u8 asic_rev;
 	u8 is_rtl8187b;
 	enum {
diff --git a/drivers/net/wireless/rtl8187_dev.c b/drivers/net/wireless/rtl8187_dev.c
index d3067b1216ca..ca5deb6244e6 100644
--- a/drivers/net/wireless/rtl8187_dev.c
+++ b/drivers/net/wireless/rtl8187_dev.c
@@ -31,6 +31,8 @@ MODULE_DESCRIPTION("RTL8187/RTL8187B USB wireless driver");
 MODULE_LICENSE("GPL");
 
 static struct usb_device_id rtl8187_table[] __devinitdata = {
+	/* Asus */
+	{USB_DEVICE(0x0b05, 0x171d), .driver_info = DEVICE_RTL8187},
 	/* Realtek */
 	{USB_DEVICE(0x0bda, 0x8187), .driver_info = DEVICE_RTL8187},
 	{USB_DEVICE(0x0bda, 0x8189), .driver_info = DEVICE_RTL8187B},
@@ -38,6 +40,7 @@ static struct usb_device_id rtl8187_table[] __devinitdata = {
 	/* Netgear */
 	{USB_DEVICE(0x0846, 0x6100), .driver_info = DEVICE_RTL8187},
 	{USB_DEVICE(0x0846, 0x6a00), .driver_info = DEVICE_RTL8187},
+	{USB_DEVICE(0x0846, 0x4260), .driver_info = DEVICE_RTL8187B},
 	/* HP */
 	{USB_DEVICE(0x03f0, 0xca02), .driver_info = DEVICE_RTL8187},
 	/* Sitecom */
@@ -169,6 +172,7 @@ static int rtl8187_tx(struct ieee80211_hw *dev, struct sk_buff *skb)
 {
 	struct rtl8187_priv *priv = dev->priv;
 	struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
+	struct ieee80211_hdr *ieee80211hdr = (struct ieee80211_hdr *)skb->data;
 	unsigned int ep;
 	void *buf;
 	struct urb *urb;
@@ -234,6 +238,20 @@ static int rtl8187_tx(struct ieee80211_hw *dev, struct sk_buff *skb)
 			ep = epmap[skb_get_queue_mapping(skb)];
 	}
 
+	/* FIXME: The sequence that follows is needed for this driver to
+	 * work with mac80211 since "mac80211: fix TX sequence numbers".
+	 * As with the temporary code in rt2x00, changes will be needed
+	 * to get proper sequence numbers on beacons. In addition, this
+	 * patch places the sequence number in the hardware state, which
+	 * limits us to a single virtual state.
+	 */
+	if (info->flags & IEEE80211_TX_CTL_ASSIGN_SEQ) {
+		if (info->flags & IEEE80211_TX_CTL_FIRST_FRAGMENT)
+			priv->seqno += 0x10;
+		ieee80211hdr->seq_ctrl &= cpu_to_le16(IEEE80211_SCTL_FRAG);
+		ieee80211hdr->seq_ctrl |= cpu_to_le16(priv->seqno);
+	}
+
 	info->driver_data[0] = dev;
 	info->driver_data[1] = urb;
 
@@ -257,6 +275,7 @@ static void rtl8187_rx_cb(struct urb *urb)
 	struct ieee80211_rx_status rx_status = { 0 };
 	int rate, signal;
 	u32 flags;
+	u32 quality;
 
 	spin_lock(&priv->rx_queue.lock);
 	if (skb->next)
@@ -280,44 +299,57 @@ static void rtl8187_rx_cb(struct urb *urb)
 		flags = le32_to_cpu(hdr->flags);
 		signal = hdr->signal & 0x7f;
 		rx_status.antenna = (hdr->signal >> 7) & 1;
-		rx_status.signal = signal;
 		rx_status.noise = hdr->noise;
 		rx_status.mactime = le64_to_cpu(hdr->mac_time);
-		priv->signal = signal;
 		priv->quality = signal;
+		rx_status.qual = priv->quality;
 		priv->noise = hdr->noise;
+		rate = (flags >> 20) & 0xF;
+		if (rate > 3) { /* OFDM rate */
+			if (signal > 90)
+				signal = 90;
+			else if (signal < 25)
+				signal = 25;
+			signal = 90 - signal;
+		} else {	/* CCK rate */
+			if (signal > 95)
+				signal = 95;
+			else if (signal < 30)
+				signal = 30;
+			signal = 95 - signal;
+		}
+		rx_status.signal = signal;
+		priv->signal = signal;
 	} else {
 		struct rtl8187b_rx_hdr *hdr =
 			(typeof(hdr))(skb_tail_pointer(skb) - sizeof(*hdr));
+		/* The Realtek datasheet for the RTL8187B shows that the RX
+		 * header contains the following quantities: signal quality,
+		 * RSSI, AGC, the received power in dB, and the measured SNR.
+		 * In testing, none of these quantities show qualitative
+		 * agreement with AP signal strength, except for the AGC,
+		 * which is inversely proportional to the strength of the
+		 * signal. In the following, the quality and signal strength
+		 * are derived from the AGC. The arbitrary scaling constants
+		 * are chosen to make the results close to the values obtained
+		 * for a BCM4312 using b43 as the driver. The noise is ignored
+		 * for now.
+		 */
 		flags = le32_to_cpu(hdr->flags);
-		signal = hdr->agc >> 1;
-		rx_status.antenna = (hdr->signal >> 7) & 1;
-		rx_status.signal = 64 - min(hdr->noise, (u8)64);
-		rx_status.noise = hdr->noise;
+		quality = 170 - hdr->agc;
+		if (quality > 100)
+			quality = 100;
+		signal = 14 - hdr->agc / 2;
+		rx_status.qual = quality;
+		priv->quality = quality;
+		rx_status.signal = signal;
+		priv->signal = signal;
+		rx_status.antenna = (hdr->rssi >> 7) & 1;
 		rx_status.mactime = le64_to_cpu(hdr->mac_time);
-		priv->signal = hdr->signal;
-		priv->quality = hdr->agc >> 1;
-		priv->noise = hdr->noise;
+		rate = (flags >> 20) & 0xF;
 	}
 
 	skb_trim(skb, flags & 0x0FFF);
-	rate = (flags >> 20) & 0xF;
-	if (rate > 3) {	/* OFDM rate */
-		if (signal > 90)
-			signal = 90;
-		else if (signal < 25)
-			signal = 25;
-		signal = 90 - signal;
-	} else {	/* CCK rate */
-		if (signal > 95)
-			signal = 95;
-		else if (signal < 30)
-			signal = 30;
-		signal = 95 - signal;
-	}
-
-	rx_status.qual = priv->quality;
-	rx_status.signal = signal;
 	rx_status.rate_idx = rate;
 	rx_status.freq = dev->conf.channel->center_freq;
 	rx_status.band = dev->conf.channel->band;
@@ -697,6 +729,7 @@ static int rtl8187_start(struct ieee80211_hw *dev)
 	if (ret)
 		return ret;
 
+	mutex_lock(&priv->conf_mutex);
 	if (priv->is_rtl8187b) {
 		reg = RTL818X_RX_CONF_MGMT |
 		      RTL818X_RX_CONF_DATA |
@@ -718,6 +751,7 @@ static int rtl8187_start(struct ieee80211_hw *dev)
 				  (7 << 0  /* long retry limit */) |
 				  (7 << 21 /* MAX TX DMA */));
 		rtl8187_init_urbs(dev);
+		mutex_unlock(&priv->conf_mutex);
 		return 0;
 	}
 
@@ -761,6 +795,7 @@ static int rtl8187_start(struct ieee80211_hw *dev)
 	reg |= RTL818X_CMD_TX_ENABLE;
 	reg |= RTL818X_CMD_RX_ENABLE;
 	rtl818x_iowrite8(priv, &priv->map->CMD, reg);
+	mutex_unlock(&priv->conf_mutex);
 
 	return 0;
 }
@@ -772,6 +807,7 @@ static void rtl8187_stop(struct ieee80211_hw *dev)
 	struct sk_buff *skb;
 	u32 reg;
 
+	mutex_lock(&priv->conf_mutex);
 	rtl818x_iowrite16(priv, &priv->map->INT_MASK, 0);
 
 	reg = rtl818x_ioread8(priv, &priv->map->CMD);
@@ -791,7 +827,7 @@ static void rtl8187_stop(struct ieee80211_hw *dev)
 		usb_kill_urb(info->urb);
 		kfree_skb(skb);
 	}
-	return;
+	mutex_unlock(&priv->conf_mutex);
 }
 
 static int rtl8187_add_interface(struct ieee80211_hw *dev,
@@ -811,6 +847,7 @@ static int rtl8187_add_interface(struct ieee80211_hw *dev,
 		return -EOPNOTSUPP;
 	}
 
+	mutex_lock(&priv->conf_mutex);
 	priv->vif = conf->vif;
 
 	rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_CONFIG);
@@ -819,6 +856,7 @@ static int rtl8187_add_interface(struct ieee80211_hw *dev,
 				 ((u8 *)conf->mac_addr)[i]);
 	rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_NORMAL);
 
+	mutex_unlock(&priv->conf_mutex);
 	return 0;
 }
 
@@ -826,8 +864,10 @@ static void rtl8187_remove_interface(struct ieee80211_hw *dev,
 				     struct ieee80211_if_init_conf *conf)
 {
 	struct rtl8187_priv *priv = dev->priv;
+	mutex_lock(&priv->conf_mutex);
 	priv->mode = IEEE80211_IF_TYPE_MNTR;
 	priv->vif = NULL;
+	mutex_unlock(&priv->conf_mutex);
 }
 
 static int rtl8187_config(struct ieee80211_hw *dev, struct ieee80211_conf *conf)
@@ -835,6 +875,7 @@ static int rtl8187_config(struct ieee80211_hw *dev, struct ieee80211_conf *conf)
 	struct rtl8187_priv *priv = dev->priv;
 	u32 reg;
 
+	mutex_lock(&priv->conf_mutex);
 	reg = rtl818x_ioread32(priv, &priv->map->TX_CONF);
 	/* Enable TX loopback on MAC level to avoid TX during channel
 	 * changes, as this has be seen to causes problems and the
@@ -867,6 +908,7 @@ static int rtl8187_config(struct ieee80211_hw *dev, struct ieee80211_conf *conf)
 	rtl818x_iowrite16(priv, &priv->map->ATIMTR_INTERVAL, 100);
 	rtl818x_iowrite16(priv, &priv->map->BEACON_INTERVAL, 100);
 	rtl818x_iowrite16(priv, &priv->map->BEACON_INTERVAL_TIME, 100);
+	mutex_unlock(&priv->conf_mutex);
 	return 0;
 }
 
@@ -878,6 +920,7 @@ static int rtl8187_config_interface(struct ieee80211_hw *dev,
 	int i;
 	u8 reg;
 
+	mutex_lock(&priv->conf_mutex);
 	for (i = 0; i < ETH_ALEN; i++)
 		rtl818x_iowrite8(priv, &priv->map->BSSID[i], conf->bssid[i]);
 
@@ -891,6 +934,7 @@ static int rtl8187_config_interface(struct ieee80211_hw *dev,
 		rtl818x_iowrite8(priv, &priv->map->MSR, reg);
 	}
 
+	mutex_unlock(&priv->conf_mutex);
 	return 0;
 }
 
@@ -1015,9 +1059,7 @@ static int __devinit rtl8187_probe(struct usb_interface *intf,
 
 	priv->mode = IEEE80211_IF_TYPE_MNTR;
 	dev->flags = IEEE80211_HW_HOST_BROADCAST_PS_BUFFERING |
-		     IEEE80211_HW_RX_INCLUDES_FCS |
-		     IEEE80211_HW_SIGNAL_UNSPEC;
-	dev->max_signal = 65;
+		     IEEE80211_HW_RX_INCLUDES_FCS;
 
 	eeprom.data = dev;
 	eeprom.register_read = rtl8187_eeprom_register_read;
@@ -1132,10 +1174,16 @@ static int __devinit rtl8187_probe(struct usb_interface *intf,
 		(*channel++).hw_value = txpwr >> 8;
 	}
 
-	if (priv->is_rtl8187b)
+	if (priv->is_rtl8187b) {
 		printk(KERN_WARNING "rtl8187: 8187B chip detected. Support "
 			"is EXPERIMENTAL, and could damage your\n"
 			"         hardware, use at your own risk\n");
+		dev->flags |= IEEE80211_HW_SIGNAL_DBM;
+	} else {
+		dev->flags |= IEEE80211_HW_SIGNAL_UNSPEC;
+		dev->max_signal = 65;
+	}
+
 	if ((id->driver_info == DEVICE_RTL8187) && priv->is_rtl8187b)
 		printk(KERN_INFO "rtl8187: inconsistency between id with OEM"
 		       " info!\n");
@@ -1154,6 +1202,7 @@ static int __devinit rtl8187_probe(struct usb_interface *intf,
 		printk(KERN_ERR "rtl8187: Cannot register device\n");
 		goto err_free_dev;
 	}
+	mutex_init(&priv->conf_mutex);
 
 	printk(KERN_INFO "%s: hwaddr %s, %s V%d + %s\n",
 	       wiphy_name(dev->wiphy), print_mac(mac, dev->wiphy->perm_addr),
diff --git a/drivers/net/wireless/wavelan.c b/drivers/net/wireless/wavelan.c
index 49ae97003952..136220b5ca81 100644
--- a/drivers/net/wireless/wavelan.c
+++ b/drivers/net/wireless/wavelan.c
@@ -1409,9 +1409,6 @@ static void wavelan_set_multicast_list(struct net_device * dev)
 			lp->mc_count = 0;
 
 			wv_82586_reconfig(dev);
-
-			/* Tell the kernel that we are doing a really bad job. */
-			dev->flags |= IFF_PROMISC;
 		}
 	} else
 		/* Are there multicast addresses to send? */
diff --git a/drivers/net/wireless/wavelan_cs.c b/drivers/net/wireless/wavelan_cs.c
index b584c0ecc62d..00a3559e5aa4 100644
--- a/drivers/net/wireless/wavelan_cs.c
+++ b/drivers/net/wireless/wavelan_cs.c
@@ -1412,9 +1412,6 @@ wavelan_set_multicast_list(struct net_device *	dev)
 	  lp->mc_count = 0;
 
 	  wv_82593_reconfig(dev);
-
-	  /* Tell the kernel that we are doing a really bad job... */
-	  dev->flags |= IFF_PROMISC;
 	}
     }
   else
@@ -1433,9 +1430,6 @@ wavelan_set_multicast_list(struct net_device *	dev)
 	    lp->mc_count = 0;
 
 	    wv_82593_reconfig(dev);
-
-	    /* Tell the kernel that we are doing a really bad job... */
-	    dev->flags |= IFF_ALLMULTI;
 	  }
       }
     else
diff --git a/drivers/net/wireless/zd1211rw/zd_mac.c b/drivers/net/wireless/zd1211rw/zd_mac.c
index fcc532bb6a7e..4d7b98b05030 100644
--- a/drivers/net/wireless/zd1211rw/zd_mac.c
+++ b/drivers/net/wireless/zd1211rw/zd_mac.c
@@ -935,7 +935,6 @@ struct ieee80211_hw *zd_mac_alloc_hw(struct usb_interface *intf)
 	hw->wiphy->bands[IEEE80211_BAND_2GHZ] = &mac->band;
 
 	hw->flags = IEEE80211_HW_RX_INCLUDES_FCS |
-		    IEEE80211_HW_HOST_GEN_BEACON_TEMPLATE |
 		    IEEE80211_HW_SIGNAL_DB;
 
 	hw->max_signal = 100;
diff --git a/drivers/net/xen-netfront.c b/drivers/net/xen-netfront.c
index 902bbe788215..c749bdba214c 100644
--- a/drivers/net/xen-netfront.c
+++ b/drivers/net/xen-netfront.c
@@ -329,7 +329,7 @@ static int xennet_open(struct net_device *dev)
 	}
 	spin_unlock_bh(&np->rx_lock);
 
-	xennet_maybe_wake_tx(dev);
+	netif_start_queue(dev);
 
 	return 0;
 }
diff --git a/drivers/of/Kconfig b/drivers/of/Kconfig
index 3a7a11a75fb4..f821dbc952a4 100644
--- a/drivers/of/Kconfig
+++ b/drivers/of/Kconfig
@@ -4,7 +4,7 @@ config OF_DEVICE
 
 config OF_GPIO
 	def_bool y
-	depends on OF && PPC_OF && HAVE_GPIO_LIB
+	depends on OF && PPC_OF && GPIOLIB
 	help
 	  OpenFirmware GPIO accessors
 
@@ -13,3 +13,9 @@ config OF_I2C
 	depends on PPC_OF && I2C
 	help
 	  OpenFirmware I2C accessors
+
+config OF_SPI
+	def_tristate SPI
+	depends on OF && PPC_OF && SPI
+	help
+	  OpenFirmware SPI accessors
diff --git a/drivers/of/Makefile b/drivers/of/Makefile
index 548772e871fd..4c3c6f8e36f5 100644
--- a/drivers/of/Makefile
+++ b/drivers/of/Makefile
@@ -2,3 +2,4 @@ obj-y = base.o
 obj-$(CONFIG_OF_DEVICE) += device.o platform.o
 obj-$(CONFIG_OF_GPIO)   += gpio.o
 obj-$(CONFIG_OF_I2C)	+= of_i2c.o
+obj-$(CONFIG_OF_SPI)	+= of_spi.o
diff --git a/drivers/of/base.c b/drivers/of/base.c
index 23ffb7c0caf2..ad8ac1a8af28 100644
--- a/drivers/of/base.c
+++ b/drivers/of/base.c
@@ -385,3 +385,91 @@ struct device_node *of_find_matching_node(struct device_node *from,
 	return np;
 }
 EXPORT_SYMBOL(of_find_matching_node);
+
+/**
+ * of_modalias_table: Table of explicit compatible ==> modalias mappings
+ *
+ * This table allows particulare compatible property values to be mapped
+ * to modalias strings.  This is useful for busses which do not directly
+ * understand the OF device tree but are populated based on data contained
+ * within the device tree.  SPI and I2C are the two current users of this
+ * table.
+ *
+ * In most cases, devices do not need to be listed in this table because
+ * the modalias value can be derived directly from the compatible table.
+ * However, if for any reason a value cannot be derived, then this table
+ * provides a method to override the implicit derivation.
+ *
+ * At the moment, a single table is used for all bus types because it is
+ * assumed that the data size is small and that the compatible values
+ * should already be distinct enough to differentiate between SPI, I2C
+ * and other devices.
+ */
+struct of_modalias_table {
+	char *of_device;
+	char *modalias;
+};
+static struct of_modalias_table of_modalias_table[] = {
+	/* Empty for now; add entries as needed */
+};
+
+/**
+ * of_modalias_node - Lookup appropriate modalias for a device node
+ * @node:	pointer to a device tree node
+ * @modalias:	Pointer to buffer that modalias value will be copied into
+ * @len:	Length of modalias value
+ *
+ * Based on the value of the compatible property, this routine will determine
+ * an appropriate modalias value for a particular device tree node.  Three
+ * separate methods are used to derive a modalias value.
+ *
+ * First method is to lookup the compatible value in of_modalias_table.
+ * Second is to look for a "linux,<modalias>" entry in the compatible list
+ * and used that for modalias.  Third is to strip off the manufacturer
+ * prefix from the first compatible entry and use the remainder as modalias
+ *
+ * This routine returns 0 on success
+ */
+int of_modalias_node(struct device_node *node, char *modalias, int len)
+{
+	int i, cplen;
+	const char *compatible;
+	const char *p;
+
+	/* 1. search for exception list entry */
+	for (i = 0; i < ARRAY_SIZE(of_modalias_table); i++) {
+		compatible = of_modalias_table[i].of_device;
+		if (!of_device_is_compatible(node, compatible))
+			continue;
+		strlcpy(modalias, of_modalias_table[i].modalias, len);
+		return 0;
+	}
+
+	compatible = of_get_property(node, "compatible", &cplen);
+	if (!compatible)
+		return -ENODEV;
+
+	/* 2. search for linux,<modalias> entry */
+	p = compatible;
+	while (cplen > 0) {
+		if (!strncmp(p, "linux,", 6)) {
+			p += 6;
+			strlcpy(modalias, p, len);
+			return 0;
+		}
+
+		i = strlen(p) + 1;
+		p += i;
+		cplen -= i;
+	}
+
+	/* 3. take first compatible entry and strip manufacturer */
+	p = strchr(compatible, ',');
+	if (!p)
+		return -ENODEV;
+	p++;
+	strlcpy(modalias, p, len);
+	return 0;
+}
+EXPORT_SYMBOL_GPL(of_modalias_node);
+
diff --git a/drivers/of/device.c b/drivers/of/device.c
index 8a1d93a2bb81..51e5214071da 100644
--- a/drivers/of/device.c
+++ b/drivers/of/device.c
@@ -57,6 +57,15 @@ static ssize_t devspec_show(struct device *dev,
 	return sprintf(buf, "%s\n", ofdev->node->full_name);
 }
 
+static ssize_t name_show(struct device *dev,
+				struct device_attribute *attr, char *buf)
+{
+	struct of_device *ofdev;
+
+	ofdev = to_of_device(dev);
+	return sprintf(buf, "%s\n", ofdev->node->name);
+}
+
 static ssize_t modalias_show(struct device *dev,
 				struct device_attribute *attr, char *buf)
 {
@@ -71,6 +80,7 @@ static ssize_t modalias_show(struct device *dev,
 
 struct device_attribute of_platform_device_attrs[] = {
 	__ATTR_RO(devspec),
+	__ATTR_RO(name),
 	__ATTR_RO(modalias),
 	__ATTR_NULL
 };
diff --git a/drivers/of/of_i2c.c b/drivers/of/of_i2c.c
index 5c015d310d4a..6a98dc8aa30b 100644
--- a/drivers/of/of_i2c.c
+++ b/drivers/of/of_i2c.c
@@ -16,62 +16,6 @@
 #include <linux/of_i2c.h>
 #include <linux/module.h>
 
-struct i2c_driver_device {
-	char    *of_device;
-	char    *i2c_type;
-};
-
-static struct i2c_driver_device i2c_devices[] = {
-};
-
-static int of_find_i2c_driver(struct device_node *node,
-			      struct i2c_board_info *info)
-{
-	int i, cplen;
-	const char *compatible;
-	const char *p;
-
-	/* 1. search for exception list entry */
-	for (i = 0; i < ARRAY_SIZE(i2c_devices); i++) {
-		if (!of_device_is_compatible(node, i2c_devices[i].of_device))
-			continue;
-		if (strlcpy(info->type, i2c_devices[i].i2c_type,
-			    I2C_NAME_SIZE) >= I2C_NAME_SIZE)
-			return -ENOMEM;
-
-		return 0;
-	}
-
-	compatible = of_get_property(node, "compatible", &cplen);
-	if (!compatible)
-		return -ENODEV;
-
-	/* 2. search for linux,<i2c-type> entry */
-	p = compatible;
-	while (cplen > 0) {
-		if (!strncmp(p, "linux,", 6)) {
-			p += 6;
-			if (strlcpy(info->type, p,
-				    I2C_NAME_SIZE) >= I2C_NAME_SIZE)
-				return -ENOMEM;
-			return 0;
-		}
-
-		i = strlen(p) + 1;
-		p += i;
-		cplen -= i;
-	}
-
-	/* 3. take fist compatible entry and strip manufacturer */
-	p = strchr(compatible, ',');
-	if (!p)
-		return -ENODEV;
-	p++;
-	if (strlcpy(info->type, p, I2C_NAME_SIZE) >= I2C_NAME_SIZE)
-		return -ENOMEM;
-	return 0;
-}
-
 void of_register_i2c_devices(struct i2c_adapter *adap,
 			     struct device_node *adap_node)
 {
@@ -83,6 +27,9 @@ void of_register_i2c_devices(struct i2c_adapter *adap,
 		const u32 *addr;
 		int len;
 
+		if (of_modalias_node(node, info.type, sizeof(info.type)) < 0)
+			continue;
+
 		addr = of_get_property(node, "reg", &len);
 		if (!addr || len < sizeof(int) || *addr > (1 << 10) - 1) {
 			printk(KERN_ERR
@@ -91,13 +38,6 @@ void of_register_i2c_devices(struct i2c_adapter *adap,
 		}
 
 		info.irq = irq_of_parse_and_map(node, 0);
-		if (info.irq == NO_IRQ)
-			info.irq = -1;
-
-		if (of_find_i2c_driver(node, &info) < 0) {
-			irq_dispose_mapping(info.irq);
-			continue;
-		}
 
 		info.addr = *addr;
 
diff --git a/drivers/of/of_spi.c b/drivers/of/of_spi.c
new file mode 100644
index 000000000000..b01eec026f68
--- /dev/null
+++ b/drivers/of/of_spi.c
@@ -0,0 +1,93 @@
+/*
+ * SPI OF support routines
+ * Copyright (C) 2008 Secret Lab Technologies Ltd.
+ *
+ * Support routines for deriving SPI device attachments from the device
+ * tree.
+ */
+
+#include <linux/of.h>
+#include <linux/device.h>
+#include <linux/spi/spi.h>
+#include <linux/of_spi.h>
+
+/**
+ * of_register_spi_devices - Register child devices onto the SPI bus
+ * @master:	Pointer to spi_master device
+ * @np:		parent node of SPI device nodes
+ *
+ * Registers an spi_device for each child node of 'np' which has a 'reg'
+ * property.
+ */
+void of_register_spi_devices(struct spi_master *master, struct device_node *np)
+{
+	struct spi_device *spi;
+	struct device_node *nc;
+	const u32 *prop;
+	int rc;
+	int len;
+
+	for_each_child_of_node(np, nc) {
+		/* Alloc an spi_device */
+		spi = spi_alloc_device(master);
+		if (!spi) {
+			dev_err(&master->dev, "spi_device alloc error for %s\n",
+				nc->full_name);
+			spi_dev_put(spi);
+			continue;
+		}
+
+		/* Select device driver */
+		if (of_modalias_node(nc, spi->modalias,
+				     sizeof(spi->modalias)) < 0) {
+			dev_err(&master->dev, "cannot find modalias for %s\n",
+				nc->full_name);
+			spi_dev_put(spi);
+			continue;
+		}
+
+		/* Device address */
+		prop = of_get_property(nc, "reg", &len);
+		if (!prop || len < sizeof(*prop)) {
+			dev_err(&master->dev, "%s has no 'reg' property\n",
+				nc->full_name);
+			spi_dev_put(spi);
+			continue;
+		}
+		spi->chip_select = *prop;
+
+		/* Mode (clock phase/polarity/etc.) */
+		if (of_find_property(nc, "spi-cpha", NULL))
+			spi->mode |= SPI_CPHA;
+		if (of_find_property(nc, "spi-cpol", NULL))
+			spi->mode |= SPI_CPOL;
+
+		/* Device speed */
+		prop = of_get_property(nc, "spi-max-frequency", &len);
+		if (!prop || len < sizeof(*prop)) {
+			dev_err(&master->dev, "%s has no 'spi-max-frequency' property\n",
+				nc->full_name);
+			spi_dev_put(spi);
+			continue;
+		}
+		spi->max_speed_hz = *prop;
+
+		/* IRQ */
+		spi->irq = irq_of_parse_and_map(nc, 0);
+
+		/* Store a pointer to the node in the device structure */
+		of_node_get(nc);
+		spi->dev.archdata.of_node = nc;
+
+		/* Register the new device */
+		request_module(spi->modalias);
+		rc = spi_add_device(spi);
+		if (rc) {
+			dev_err(&master->dev, "spi_device register error %s\n",
+				nc->full_name);
+			spi_dev_put(spi);
+		}
+
+	}
+}
+EXPORT_SYMBOL(of_register_spi_devices);
diff --git a/drivers/oprofile/cpu_buffer.c b/drivers/oprofile/cpu_buffer.c
index 2450b3a393ff..7ba78e6d210e 100644
--- a/drivers/oprofile/cpu_buffer.c
+++ b/drivers/oprofile/cpu_buffer.c
@@ -38,8 +38,10 @@ void free_cpu_buffers(void)
 {
 	int i;
  
-	for_each_online_cpu(i)
+	for_each_online_cpu(i) {
 		vfree(per_cpu(cpu_buffer, i).buffer);
+		per_cpu(cpu_buffer, i).buffer = NULL;
+	}
 }
 
 int alloc_cpu_buffers(void)
diff --git a/drivers/oprofile/event_buffer.c b/drivers/oprofile/event_buffer.c
index e7fbac529935..8d692a5c8e73 100644
--- a/drivers/oprofile/event_buffer.c
+++ b/drivers/oprofile/event_buffer.c
@@ -93,6 +93,8 @@ out:
 void free_event_buffer(void)
 {
 	vfree(event_buffer);
+
+	event_buffer = NULL;
 }
 
  
diff --git a/drivers/parport/ieee1284.c b/drivers/parport/ieee1284.c
index 0338b0912674..e97059415ab4 100644
--- a/drivers/parport/ieee1284.c
+++ b/drivers/parport/ieee1284.c
@@ -199,8 +199,6 @@ int parport_wait_peripheral(struct parport *port,
 	/* 40ms of slow polling. */
 	deadline = jiffies + msecs_to_jiffies(40);
 	while (time_before (jiffies, deadline)) {
-		int ret;
-
 		if (signal_pending (current))
 			return -EINTR;
 
diff --git a/drivers/parport/parport_ax88796.c b/drivers/parport/parport_ax88796.c
index 4ec220b2eae7..6938d2e9f18f 100644
--- a/drivers/parport/parport_ax88796.c
+++ b/drivers/parport/parport_ax88796.c
@@ -406,6 +406,8 @@ static int parport_ax88796_resume(struct platform_device *dev)
 #define parport_ax88796_resume  NULL
 #endif
 
+MODULE_ALIAS("platform:ax88796-pp");
+
 static struct platform_driver axdrv = {
 	.driver		= {
 		.name	= "ax88796-pp",
diff --git a/drivers/parport/parport_cs.c b/drivers/parport/parport_cs.c
index 802a81d47367..00e1d9620f7c 100644
--- a/drivers/parport/parport_cs.c
+++ b/drivers/parport/parport_cs.c
@@ -235,7 +235,7 @@ failed:
     
 ======================================================================*/
 
-void parport_cs_release(struct pcmcia_device *link)
+static void parport_cs_release(struct pcmcia_device *link)
 {
 	parport_info_t *info = link->priv;
 
diff --git a/drivers/parport/parport_pc.c b/drivers/parport/parport_pc.c
index e0c2a4584ec6..8a846adf1dcf 100644
--- a/drivers/parport/parport_pc.c
+++ b/drivers/parport/parport_pc.c
@@ -2867,7 +2867,7 @@ static struct parport_pc_pci {
 	 * and 840 locks up if you write 1 to bit 2! */
 	/* oxsemi_952 */		{ 1, { { 0, 1 }, } },
 	/* oxsemi_954 */		{ 1, { { 0, -1 }, } },
-	/* oxsemi_840 */		{ 1, { { 0, -1 }, } },
+	/* oxsemi_840 */		{ 1, { { 0, 1 }, } },
 	/* aks_0100 */                  { 1, { { 0, -1 }, } },
 	/* mobility_pp */		{ 1, { { 0, 1 }, } },
 	/* netmos_9705 */               { 1, { { 0, -1 }, } }, /* untested */
diff --git a/drivers/parport/procfs.c b/drivers/parport/procfs.c
index d950fc34320a..554e11f9e1ce 100644
--- a/drivers/parport/procfs.c
+++ b/drivers/parport/procfs.c
@@ -429,9 +429,6 @@ struct parport_default_sysctl_table
 	ctl_table dev_dir[2];
 };
 
-extern unsigned long parport_default_timeslice;
-extern int parport_default_spintime;
-
 static struct parport_default_sysctl_table
 parport_default_sysctl_table = {
 	.sysctl_header	= NULL,
diff --git a/drivers/pci/Makefile b/drivers/pci/Makefile
index 7d63f8ced24b..4b47f4ece5b7 100644
--- a/drivers/pci/Makefile
+++ b/drivers/pci/Makefile
@@ -26,6 +26,8 @@ obj-$(CONFIG_HT_IRQ) += htirq.o
 # Build Intel IOMMU support
 obj-$(CONFIG_DMAR) += dmar.o iova.o intel-iommu.o
 
+obj-$(CONFIG_INTR_REMAP) += dmar.o intr_remapping.o
+
 #
 # Some architectures use the generic PCI setup functions
 #
diff --git a/drivers/pci/dma_remapping.h b/drivers/pci/dma_remapping.h
new file mode 100644
index 000000000000..bff5c65f81dc
--- /dev/null
+++ b/drivers/pci/dma_remapping.h
@@ -0,0 +1,157 @@
+#ifndef _DMA_REMAPPING_H
+#define _DMA_REMAPPING_H
+
+/*
+ * We need a fixed PAGE_SIZE of 4K irrespective of
+ * arch PAGE_SIZE for IOMMU page tables.
+ */
+#define PAGE_SHIFT_4K		(12)
+#define PAGE_SIZE_4K		(1UL << PAGE_SHIFT_4K)
+#define PAGE_MASK_4K		(((u64)-1) << PAGE_SHIFT_4K)
+#define PAGE_ALIGN_4K(addr)	(((addr) + PAGE_SIZE_4K - 1) & PAGE_MASK_4K)
+
+#define IOVA_PFN(addr)		((addr) >> PAGE_SHIFT_4K)
+#define DMA_32BIT_PFN		IOVA_PFN(DMA_32BIT_MASK)
+#define DMA_64BIT_PFN		IOVA_PFN(DMA_64BIT_MASK)
+
+
+/*
+ * 0: Present
+ * 1-11: Reserved
+ * 12-63: Context Ptr (12 - (haw-1))
+ * 64-127: Reserved
+ */
+struct root_entry {
+	u64	val;
+	u64	rsvd1;
+};
+#define ROOT_ENTRY_NR (PAGE_SIZE_4K/sizeof(struct root_entry))
+static inline bool root_present(struct root_entry *root)
+{
+	return (root->val & 1);
+}
+static inline void set_root_present(struct root_entry *root)
+{
+	root->val |= 1;
+}
+static inline void set_root_value(struct root_entry *root, unsigned long value)
+{
+	root->val |= value & PAGE_MASK_4K;
+}
+
+struct context_entry;
+static inline struct context_entry *
+get_context_addr_from_root(struct root_entry *root)
+{
+	return (struct context_entry *)
+		(root_present(root)?phys_to_virt(
+		root->val & PAGE_MASK_4K):
+		NULL);
+}
+
+/*
+ * low 64 bits:
+ * 0: present
+ * 1: fault processing disable
+ * 2-3: translation type
+ * 12-63: address space root
+ * high 64 bits:
+ * 0-2: address width
+ * 3-6: aval
+ * 8-23: domain id
+ */
+struct context_entry {
+	u64 lo;
+	u64 hi;
+};
+#define context_present(c) ((c).lo & 1)
+#define context_fault_disable(c) (((c).lo >> 1) & 1)
+#define context_translation_type(c) (((c).lo >> 2) & 3)
+#define context_address_root(c) ((c).lo & PAGE_MASK_4K)
+#define context_address_width(c) ((c).hi &  7)
+#define context_domain_id(c) (((c).hi >> 8) & ((1 << 16) - 1))
+
+#define context_set_present(c) do {(c).lo |= 1;} while (0)
+#define context_set_fault_enable(c) \
+	do {(c).lo &= (((u64)-1) << 2) | 1;} while (0)
+#define context_set_translation_type(c, val) \
+	do { \
+		(c).lo &= (((u64)-1) << 4) | 3; \
+		(c).lo |= ((val) & 3) << 2; \
+	} while (0)
+#define CONTEXT_TT_MULTI_LEVEL 0
+#define context_set_address_root(c, val) \
+	do {(c).lo |= (val) & PAGE_MASK_4K;} while (0)
+#define context_set_address_width(c, val) do {(c).hi |= (val) & 7;} while (0)
+#define context_set_domain_id(c, val) \
+	do {(c).hi |= ((val) & ((1 << 16) - 1)) << 8;} while (0)
+#define context_clear_entry(c) do {(c).lo = 0; (c).hi = 0;} while (0)
+
+/*
+ * 0: readable
+ * 1: writable
+ * 2-6: reserved
+ * 7: super page
+ * 8-11: available
+ * 12-63: Host physcial address
+ */
+struct dma_pte {
+	u64 val;
+};
+#define dma_clear_pte(p)	do {(p).val = 0;} while (0)
+
+#define DMA_PTE_READ (1)
+#define DMA_PTE_WRITE (2)
+
+#define dma_set_pte_readable(p) do {(p).val |= DMA_PTE_READ;} while (0)
+#define dma_set_pte_writable(p) do {(p).val |= DMA_PTE_WRITE;} while (0)
+#define dma_set_pte_prot(p, prot) \
+		do {(p).val = ((p).val & ~3) | ((prot) & 3); } while (0)
+#define dma_pte_addr(p) ((p).val & PAGE_MASK_4K)
+#define dma_set_pte_addr(p, addr) do {\
+		(p).val |= ((addr) & PAGE_MASK_4K); } while (0)
+#define dma_pte_present(p) (((p).val & 3) != 0)
+
+struct intel_iommu;
+
+struct dmar_domain {
+	int	id;			/* domain id */
+	struct intel_iommu *iommu;	/* back pointer to owning iommu */
+
+	struct list_head devices; 	/* all devices' list */
+	struct iova_domain iovad;	/* iova's that belong to this domain */
+
+	struct dma_pte	*pgd;		/* virtual address */
+	spinlock_t	mapping_lock;	/* page table lock */
+	int		gaw;		/* max guest address width */
+
+	/* adjusted guest address width, 0 is level 2 30-bit */
+	int		agaw;
+
+#define DOMAIN_FLAG_MULTIPLE_DEVICES 1
+	int		flags;
+};
+
+/* PCI domain-device relationship */
+struct device_domain_info {
+	struct list_head link;	/* link to domain siblings */
+	struct list_head global; /* link to global list */
+	u8 bus;			/* PCI bus numer */
+	u8 devfn;		/* PCI devfn number */
+	struct pci_dev *dev; /* it's NULL for PCIE-to-PCI bridge */
+	struct dmar_domain *domain; /* pointer to domain */
+};
+
+extern int init_dmars(void);
+extern void free_dmar_iommu(struct intel_iommu *iommu);
+
+extern int dmar_disabled;
+
+#ifndef CONFIG_DMAR_GFX_WA
+static inline void iommu_prepare_gfx_mapping(void)
+{
+	return;
+}
+#endif /* !CONFIG_DMAR_GFX_WA */
+
+#endif
diff --git a/drivers/pci/dmar.c b/drivers/pci/dmar.c
index 8bf86ae2333f..bd2c01674f5e 100644
--- a/drivers/pci/dmar.c
+++ b/drivers/pci/dmar.c
@@ -19,13 +19,16 @@
  * Author: Shaohua Li <shaohua.li@intel.com>
  * Author: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com>
  *
- * This file implements early detection/parsing of DMA Remapping Devices
+ * This file implements early detection/parsing of Remapping Devices
  * reported to OS through BIOS via DMA remapping reporting (DMAR) ACPI
  * tables.
+ *
+ * These routines are used by both DMA-remapping and Interrupt-remapping
  */
 
 #include <linux/pci.h>
 #include <linux/dmar.h>
+#include <linux/timer.h>
 #include "iova.h"
 #include "intel-iommu.h"
 
@@ -37,7 +40,6 @@
  * these units are not supported by the architecture.
  */
 LIST_HEAD(dmar_drhd_units);
-LIST_HEAD(dmar_rmrr_units);
 
 static struct acpi_table_header * __initdata dmar_tbl;
 
@@ -53,11 +55,6 @@ static void __init dmar_register_drhd_unit(struct dmar_drhd_unit *drhd)
 		list_add(&drhd->list, &dmar_drhd_units);
 }
 
-static void __init dmar_register_rmrr_unit(struct dmar_rmrr_unit *rmrr)
-{
-	list_add(&rmrr->list, &dmar_rmrr_units);
-}
-
 static int __init dmar_parse_one_dev_scope(struct acpi_dmar_device_scope *scope,
 					   struct pci_dev **dev, u16 segment)
 {
@@ -172,19 +169,37 @@ dmar_parse_one_drhd(struct acpi_dmar_header *header)
 	struct acpi_dmar_hardware_unit *drhd;
 	struct dmar_drhd_unit *dmaru;
 	int ret = 0;
-	static int include_all;
 
 	dmaru = kzalloc(sizeof(*dmaru), GFP_KERNEL);
 	if (!dmaru)
 		return -ENOMEM;
 
+	dmaru->hdr = header;
 	drhd = (struct acpi_dmar_hardware_unit *)header;
 	dmaru->reg_base_addr = drhd->address;
 	dmaru->include_all = drhd->flags & 0x1; /* BIT0: INCLUDE_ALL */
 
+	ret = alloc_iommu(dmaru);
+	if (ret) {
+		kfree(dmaru);
+		return ret;
+	}
+	dmar_register_drhd_unit(dmaru);
+	return 0;
+}
+
+static int __init
+dmar_parse_dev(struct dmar_drhd_unit *dmaru)
+{
+	struct acpi_dmar_hardware_unit *drhd;
+	static int include_all;
+	int ret;
+
+	drhd = (struct acpi_dmar_hardware_unit *) dmaru->hdr;
+
 	if (!dmaru->include_all)
 		ret = dmar_parse_dev_scope((void *)(drhd + 1),
-				((void *)drhd) + header->length,
+				((void *)drhd) + drhd->header.length,
 				&dmaru->devices_cnt, &dmaru->devices,
 				drhd->segment);
 	else {
@@ -197,37 +212,59 @@ dmar_parse_one_drhd(struct acpi_dmar_header *header)
 		include_all = 1;
 	}
 
-	if (ret || (dmaru->devices_cnt == 0 && !dmaru->include_all))
+	if (ret || (dmaru->devices_cnt == 0 && !dmaru->include_all)) {
+		list_del(&dmaru->list);
 		kfree(dmaru);
-	else
-		dmar_register_drhd_unit(dmaru);
+	}
 	return ret;
 }
 
+#ifdef CONFIG_DMAR
+LIST_HEAD(dmar_rmrr_units);
+
+static void __init dmar_register_rmrr_unit(struct dmar_rmrr_unit *rmrr)
+{
+	list_add(&rmrr->list, &dmar_rmrr_units);
+}
+
+
 static int __init
 dmar_parse_one_rmrr(struct acpi_dmar_header *header)
 {
 	struct acpi_dmar_reserved_memory *rmrr;
 	struct dmar_rmrr_unit *rmrru;
-	int ret = 0;
 
 	rmrru = kzalloc(sizeof(*rmrru), GFP_KERNEL);
 	if (!rmrru)
 		return -ENOMEM;
 
+	rmrru->hdr = header;
 	rmrr = (struct acpi_dmar_reserved_memory *)header;
 	rmrru->base_address = rmrr->base_address;
 	rmrru->end_address = rmrr->end_address;
+
+	dmar_register_rmrr_unit(rmrru);
+	return 0;
+}
+
+static int __init
+rmrr_parse_dev(struct dmar_rmrr_unit *rmrru)
+{
+	struct acpi_dmar_reserved_memory *rmrr;
+	int ret;
+
+	rmrr = (struct acpi_dmar_reserved_memory *) rmrru->hdr;
 	ret = dmar_parse_dev_scope((void *)(rmrr + 1),
-		((void *)rmrr) + header->length,
+		((void *)rmrr) + rmrr->header.length,
 		&rmrru->devices_cnt, &rmrru->devices, rmrr->segment);
 
-	if (ret || (rmrru->devices_cnt == 0))
+	if (ret || (rmrru->devices_cnt == 0)) {
+		list_del(&rmrru->list);
 		kfree(rmrru);
-	else
-		dmar_register_rmrr_unit(rmrru);
+	}
 	return ret;
 }
+#endif
 
 static void __init
 dmar_table_print_dmar_entry(struct acpi_dmar_header *header)
@@ -252,6 +289,7 @@ dmar_table_print_dmar_entry(struct acpi_dmar_header *header)
 	}
 }
 
+
 /**
  * parse_dmar_table - parses the DMA reporting table
  */
@@ -284,7 +322,9 @@ parse_dmar_table(void)
 			ret = dmar_parse_one_drhd(entry_header);
 			break;
 		case ACPI_DMAR_TYPE_RESERVED_MEMORY:
+#ifdef CONFIG_DMAR
 			ret = dmar_parse_one_rmrr(entry_header);
+#endif
 			break;
 		default:
 			printk(KERN_WARNING PREFIX
@@ -300,15 +340,77 @@ parse_dmar_table(void)
 	return ret;
 }
 
+int dmar_pci_device_match(struct pci_dev *devices[], int cnt,
+			  struct pci_dev *dev)
+{
+	int index;
+
+	while (dev) {
+		for (index = 0; index < cnt; index++)
+			if (dev == devices[index])
+				return 1;
 
-int __init dmar_table_init(void)
+		/* Check our parent */
+		dev = dev->bus->self;
+	}
+
+	return 0;
+}
+
+struct dmar_drhd_unit *
+dmar_find_matched_drhd_unit(struct pci_dev *dev)
 {
+	struct dmar_drhd_unit *drhd = NULL;
+
+	list_for_each_entry(drhd, &dmar_drhd_units, list) {
+		if (drhd->include_all || dmar_pci_device_match(drhd->devices,
+						drhd->devices_cnt, dev))
+			return drhd;
+	}
+
+	return NULL;
+}
+
+int __init dmar_dev_scope_init(void)
+{
+	struct dmar_drhd_unit *drhd;
+	int ret = -ENODEV;
+
+	for_each_drhd_unit(drhd) {
+		ret = dmar_parse_dev(drhd);
+		if (ret)
+			return ret;
+	}
+
+#ifdef CONFIG_DMAR
+	{
+		struct dmar_rmrr_unit *rmrr;
+		for_each_rmrr_units(rmrr) {
+			ret = rmrr_parse_dev(rmrr);
+			if (ret)
+				return ret;
+		}
+	}
+#endif
+
+	return ret;
+}
 
+
+int __init dmar_table_init(void)
+{
+	static int dmar_table_initialized;
 	int ret;
 
+	if (dmar_table_initialized)
+		return 0;
+
+	dmar_table_initialized = 1;
+
 	ret = parse_dmar_table();
 	if (ret) {
-		printk(KERN_INFO PREFIX "parse DMAR table failure.\n");
+		if (ret != -ENODEV)
+			printk(KERN_INFO PREFIX "parse DMAR table failure.\n");
 		return ret;
 	}
 
@@ -317,9 +419,14 @@ int __init dmar_table_init(void)
 		return -ENODEV;
 	}
 
+#ifdef CONFIG_DMAR
 	if (list_empty(&dmar_rmrr_units))
 		printk(KERN_INFO PREFIX "No RMRR found\n");
+#endif
 
+#ifdef CONFIG_INTR_REMAP
+	parse_ioapics_under_ir();
+#endif
 	return 0;
 }
 
@@ -341,3 +448,255 @@ int __init early_dmar_detect(void)
 
 	return (ACPI_SUCCESS(status) ? 1 : 0);
 }
+
+void __init detect_intel_iommu(void)
+{
+	int ret;
+
+	ret = early_dmar_detect();
+
+#ifdef CONFIG_DMAR
+	{
+		struct acpi_table_dmar *dmar;
+		/*
+		 * for now we will disable dma-remapping when interrupt
+		 * remapping is enabled.
+		 * When support for queued invalidation for IOTLB invalidation
+		 * is added, we will not need this any more.
+		 */
+		dmar = (struct acpi_table_dmar *) dmar_tbl;
+		if (ret && cpu_has_x2apic && dmar->flags & 0x1) {
+			printk(KERN_INFO
+			       "Queued invalidation will be enabled to support "
+			       "x2apic and Intr-remapping.\n");
+			printk(KERN_INFO
+			       "Disabling IOMMU detection, because of missing "
+			       "queued invalidation support for IOTLB "
+			       "invalidation\n");
+			printk(KERN_INFO
+			       "Use \"nox2apic\", if you want to use Intel "
+			       " IOMMU for DMA-remapping and don't care about "
+			       " x2apic support\n");
+
+			dmar_disabled = 1;
+			return;
+		}
+
+		if (ret && !no_iommu && !iommu_detected && !swiotlb &&
+		    !dmar_disabled)
+			iommu_detected = 1;
+	}
+#endif
+}
+
+
+int alloc_iommu(struct dmar_drhd_unit *drhd)
+{
+	struct intel_iommu *iommu;
+	int map_size;
+	u32 ver;
+	static int iommu_allocated = 0;
+
+	iommu = kzalloc(sizeof(*iommu), GFP_KERNEL);
+	if (!iommu)
+		return -ENOMEM;
+
+	iommu->seq_id = iommu_allocated++;
+
+	iommu->reg = ioremap(drhd->reg_base_addr, PAGE_SIZE_4K);
+	if (!iommu->reg) {
+		printk(KERN_ERR "IOMMU: can't map the region\n");
+		goto error;
+	}
+	iommu->cap = dmar_readq(iommu->reg + DMAR_CAP_REG);
+	iommu->ecap = dmar_readq(iommu->reg + DMAR_ECAP_REG);
+
+	/* the registers might be more than one page */
+	map_size = max_t(int, ecap_max_iotlb_offset(iommu->ecap),
+		cap_max_fault_reg_offset(iommu->cap));
+	map_size = PAGE_ALIGN_4K(map_size);
+	if (map_size > PAGE_SIZE_4K) {
+		iounmap(iommu->reg);
+		iommu->reg = ioremap(drhd->reg_base_addr, map_size);
+		if (!iommu->reg) {
+			printk(KERN_ERR "IOMMU: can't map the region\n");
+			goto error;
+		}
+	}
+
+	ver = readl(iommu->reg + DMAR_VER_REG);
+	pr_debug("IOMMU %llx: ver %d:%d cap %llx ecap %llx\n",
+		drhd->reg_base_addr, DMAR_VER_MAJOR(ver), DMAR_VER_MINOR(ver),
+		iommu->cap, iommu->ecap);
+
+	spin_lock_init(&iommu->register_lock);
+
+	drhd->iommu = iommu;
+	return 0;
+error:
+	kfree(iommu);
+	return -1;
+}
+
+void free_iommu(struct intel_iommu *iommu)
+{
+	if (!iommu)
+		return;
+
+#ifdef CONFIG_DMAR
+	free_dmar_iommu(iommu);
+#endif
+
+	if (iommu->reg)
+		iounmap(iommu->reg);
+	kfree(iommu);
+}
+
+/*
+ * Reclaim all the submitted descriptors which have completed its work.
+ */
+static inline void reclaim_free_desc(struct q_inval *qi)
+{
+	while (qi->desc_status[qi->free_tail] == QI_DONE) {
+		qi->desc_status[qi->free_tail] = QI_FREE;
+		qi->free_tail = (qi->free_tail + 1) % QI_LENGTH;
+		qi->free_cnt++;
+	}
+}
+
+/*
+ * Submit the queued invalidation descriptor to the remapping
+ * hardware unit and wait for its completion.
+ */
+void qi_submit_sync(struct qi_desc *desc, struct intel_iommu *iommu)
+{
+	struct q_inval *qi = iommu->qi;
+	struct qi_desc *hw, wait_desc;
+	int wait_index, index;
+	unsigned long flags;
+
+	if (!qi)
+		return;
+
+	hw = qi->desc;
+
+	spin_lock(&qi->q_lock);
+	while (qi->free_cnt < 3) {
+		spin_unlock(&qi->q_lock);
+		cpu_relax();
+		spin_lock(&qi->q_lock);
+	}
+
+	index = qi->free_head;
+	wait_index = (index + 1) % QI_LENGTH;
+
+	qi->desc_status[index] = qi->desc_status[wait_index] = QI_IN_USE;
+
+	hw[index] = *desc;
+
+	wait_desc.low = QI_IWD_STATUS_DATA(2) | QI_IWD_STATUS_WRITE | QI_IWD_TYPE;
+	wait_desc.high = virt_to_phys(&qi->desc_status[wait_index]);
+
+	hw[wait_index] = wait_desc;
+
+	__iommu_flush_cache(iommu, &hw[index], sizeof(struct qi_desc));
+	__iommu_flush_cache(iommu, &hw[wait_index], sizeof(struct qi_desc));
+
+	qi->free_head = (qi->free_head + 2) % QI_LENGTH;
+	qi->free_cnt -= 2;
+
+	spin_lock_irqsave(&iommu->register_lock, flags);
+	/*
+	 * update the HW tail register indicating the presence of
+	 * new descriptors.
+	 */
+	writel(qi->free_head << 4, iommu->reg + DMAR_IQT_REG);
+	spin_unlock_irqrestore(&iommu->register_lock, flags);
+
+	while (qi->desc_status[wait_index] != QI_DONE) {
+		spin_unlock(&qi->q_lock);
+		cpu_relax();
+		spin_lock(&qi->q_lock);
+	}
+
+	qi->desc_status[index] = QI_DONE;
+
+	reclaim_free_desc(qi);
+	spin_unlock(&qi->q_lock);
+}
+
+/*
+ * Flush the global interrupt entry cache.
+ */
+void qi_global_iec(struct intel_iommu *iommu)
+{
+	struct qi_desc desc;
+
+	desc.low = QI_IEC_TYPE;
+	desc.high = 0;
+
+	qi_submit_sync(&desc, iommu);
+}
+
+/*
+ * Enable Queued Invalidation interface. This is a must to support
+ * interrupt-remapping. Also used by DMA-remapping, which replaces
+ * register based IOTLB invalidation.
+ */
+int dmar_enable_qi(struct intel_iommu *iommu)
+{
+	u32 cmd, sts;
+	unsigned long flags;
+	struct q_inval *qi;
+
+	if (!ecap_qis(iommu->ecap))
+		return -ENOENT;
+
+	/*
+	 * queued invalidation is already setup and enabled.
+	 */
+	if (iommu->qi)
+		return 0;
+
+	iommu->qi = kmalloc(sizeof(*qi), GFP_KERNEL);
+	if (!iommu->qi)
+		return -ENOMEM;
+
+	qi = iommu->qi;
+
+	qi->desc = (void *)(get_zeroed_page(GFP_KERNEL));
+	if (!qi->desc) {
+		kfree(qi);
+		iommu->qi = 0;
+		return -ENOMEM;
+	}
+
+	qi->desc_status = kmalloc(QI_LENGTH * sizeof(int), GFP_KERNEL);
+	if (!qi->desc_status) {
+		free_page((unsigned long) qi->desc);
+		kfree(qi);
+		iommu->qi = 0;
+		return -ENOMEM;
+	}
+
+	qi->free_head = qi->free_tail = 0;
+	qi->free_cnt = QI_LENGTH;
+
+	spin_lock_init(&qi->q_lock);
+
+	spin_lock_irqsave(&iommu->register_lock, flags);
+	/* write zero to the tail reg */
+	writel(0, iommu->reg + DMAR_IQT_REG);
+
+	dmar_writeq(iommu->reg + DMAR_IQA_REG, virt_to_phys(qi->desc));
+
+	cmd = iommu->gcmd | DMA_GCMD_QIE;
+	iommu->gcmd |= DMA_GCMD_QIE;
+	writel(cmd, iommu->reg + DMAR_GCMD_REG);
+
+	/* Make sure hardware complete it */
+	IOMMU_WAIT_OP(iommu, DMAR_GSTS_REG, readl, (sts & DMA_GSTS_QIES), sts);
+	spin_unlock_irqrestore(&iommu->register_lock, flags);
+
+	return 0;
+}
diff --git a/drivers/pci/hotplug/acpi_pcihp.c b/drivers/pci/hotplug/acpi_pcihp.c
index 93e37f0666ab..e17ef54f0efc 100644
--- a/drivers/pci/hotplug/acpi_pcihp.c
+++ b/drivers/pci/hotplug/acpi_pcihp.c
@@ -382,7 +382,7 @@ EXPORT_SYMBOL_GPL(acpi_get_hp_params_from_firmware);
 int acpi_get_hp_hw_control_from_firmware(struct pci_dev *dev, u32 flags)
 {
 	acpi_status status;
-	acpi_handle chandle, handle = DEVICE_ACPI_HANDLE(&(dev->dev));
+	acpi_handle chandle, handle;
 	struct pci_dev *pdev = dev;
 	struct pci_bus *parent;
 	struct acpi_buffer string = { ACPI_ALLOCATE_BUFFER, NULL };
@@ -399,10 +399,25 @@ int acpi_get_hp_hw_control_from_firmware(struct pci_dev *dev, u32 flags)
 	 * Per PCI firmware specification, we should run the ACPI _OSC
 	 * method to get control of hotplug hardware before using it. If
 	 * an _OSC is missing, we look for an OSHP to do the same thing.
-	 * To handle different BIOS behavior, we look for _OSC and OSHP
-	 * within the scope of the hotplug controller and its parents,
+	 * To handle different BIOS behavior, we look for _OSC on a root
+	 * bridge preferentially (according to PCI fw spec). Later for
+	 * OSHP within the scope of the hotplug controller and its parents,
 	 * upto the host bridge under which this controller exists.
 	 */
+	handle = acpi_find_root_bridge_handle(pdev);
+	if (handle) {
+		acpi_get_name(handle, ACPI_FULL_PATHNAME, &string);
+		dbg("Trying to get hotplug control for %s\n",
+				(char *)string.pointer);
+		status = pci_osc_control_set(handle, flags);
+		if (ACPI_SUCCESS(status))
+			goto got_one;
+		kfree(string.pointer);
+		string = (struct acpi_buffer){ ACPI_ALLOCATE_BUFFER, NULL };
+	}
+
+	pdev = dev;
+	handle = DEVICE_ACPI_HANDLE(&dev->dev);
 	while (!handle) {
 		/*
 		 * This hotplug controller was not listed in the ACPI name
@@ -427,15 +442,9 @@ int acpi_get_hp_hw_control_from_firmware(struct pci_dev *dev, u32 flags)
 		acpi_get_name(handle, ACPI_FULL_PATHNAME, &string);
 		dbg("Trying to get hotplug control for %s \n",
 		    (char *)string.pointer);
-		status = pci_osc_control_set(handle, flags);
-		if (status == AE_NOT_FOUND)
-			status = acpi_run_oshp(handle);
-		if (ACPI_SUCCESS(status)) {
-			dbg("Gained control for hotplug HW for pci %s (%s)\n",
-			    pci_name(dev), (char *)string.pointer);
-			kfree(string.pointer);
-			return 0;
-		}
+		status = acpi_run_oshp(handle);
+		if (ACPI_SUCCESS(status))
+			goto got_one;
 		if (acpi_root_bridge(handle))
 			break;
 		chandle = handle;
@@ -449,6 +458,11 @@ int acpi_get_hp_hw_control_from_firmware(struct pci_dev *dev, u32 flags)
 
 	kfree(string.pointer);
 	return -ENODEV;
+got_one:
+	dbg("Gained control for hotplug HW for pci %s (%s)\n", pci_name(dev),
+			(char *)string.pointer);
+	kfree(string.pointer);
+	return 0;
 }
 EXPORT_SYMBOL(acpi_get_hp_hw_control_from_firmware);
 
diff --git a/drivers/pci/hotplug/pciehp.h b/drivers/pci/hotplug/pciehp.h
index e3a1e7e7dba2..9e6cec67e1cc 100644
--- a/drivers/pci/hotplug/pciehp.h
+++ b/drivers/pci/hotplug/pciehp.h
@@ -43,7 +43,6 @@ extern int pciehp_poll_mode;
 extern int pciehp_poll_time;
 extern int pciehp_debug;
 extern int pciehp_force;
-extern int pciehp_slot_with_bus;
 extern struct workqueue_struct *pciehp_wq;
 
 #define dbg(format, arg...)						\
diff --git a/drivers/pci/hotplug/pciehp_core.c b/drivers/pci/hotplug/pciehp_core.c
index 3677495c4f91..4fd5355bc3b5 100644
--- a/drivers/pci/hotplug/pciehp_core.c
+++ b/drivers/pci/hotplug/pciehp_core.c
@@ -41,7 +41,6 @@ int pciehp_debug;
 int pciehp_poll_mode;
 int pciehp_poll_time;
 int pciehp_force;
-int pciehp_slot_with_bus;
 struct workqueue_struct *pciehp_wq;
 
 #define DRIVER_VERSION	"0.4"
@@ -56,12 +55,10 @@ module_param(pciehp_debug, bool, 0644);
 module_param(pciehp_poll_mode, bool, 0644);
 module_param(pciehp_poll_time, int, 0644);
 module_param(pciehp_force, bool, 0644);
-module_param(pciehp_slot_with_bus, bool, 0644);
 MODULE_PARM_DESC(pciehp_debug, "Debugging mode enabled or not");
 MODULE_PARM_DESC(pciehp_poll_mode, "Using polling mechanism for hot-plug events or not");
 MODULE_PARM_DESC(pciehp_poll_time, "Polling mechanism frequency, in seconds");
 MODULE_PARM_DESC(pciehp_force, "Force pciehp, even if _OSC and OSHP are missing");
-MODULE_PARM_DESC(pciehp_slot_with_bus, "Use bus number in the slot name");
 
 #define PCIE_MODULE_NAME "pciehp"
 
@@ -194,6 +191,7 @@ static int init_slots(struct controller *ctrl)
 	struct slot *slot;
 	struct hotplug_slot *hotplug_slot;
 	struct hotplug_slot_info *info;
+	int len, dup = 1;
 	int retval = -ENOMEM;
 
 	list_for_each_entry(slot, &ctrl->slot_list, slot_list) {
@@ -220,15 +218,24 @@ static int init_slots(struct controller *ctrl)
 		dbg("Registering bus=%x dev=%x hp_slot=%x sun=%x "
 		    "slot_device_offset=%x\n", slot->bus, slot->device,
 		    slot->hp_slot, slot->number, ctrl->slot_device_offset);
+duplicate_name:
 		retval = pci_hp_register(hotplug_slot,
 					 ctrl->pci_dev->subordinate,
 					 slot->device);
 		if (retval) {
+			/*
+			 * If slot N already exists, we'll try to create
+			 * slot N-1, N-2 ... N-M, until we overflow.
+			 */
+			if (retval == -EEXIST) {
+				len = snprintf(slot->name, SLOT_NAME_SIZE,
+					       "%d-%d", slot->number, dup++);
+				if (len < SLOT_NAME_SIZE)
+					goto duplicate_name;
+				else
+					err("duplicate slot name overflow\n");
+			}
 			err("pci_hp_register failed with error %d\n", retval);
-			if (retval == -EEXIST)
-				err("Failed to register slot because of name "
-				    "collision. Try \'pciehp_slot_with_bus\' "
-				    "module option.\n");
 			goto error_info;
 		}
 		/* create additional sysfs entries */
diff --git a/drivers/pci/hotplug/pciehp_hpc.c b/drivers/pci/hotplug/pciehp_hpc.c
index 1323a43285d7..ab31f5ba665d 100644
--- a/drivers/pci/hotplug/pciehp_hpc.c
+++ b/drivers/pci/hotplug/pciehp_hpc.c
@@ -1030,15 +1030,6 @@ static void pcie_shutdown_notification(struct controller *ctrl)
 	pciehp_free_irq(ctrl);
 }
 
-static void make_slot_name(struct slot *slot)
-{
-	if (pciehp_slot_with_bus)
-		snprintf(slot->name, SLOT_NAME_SIZE, "%04d_%04d",
-			 slot->bus, slot->number);
-	else
-		snprintf(slot->name, SLOT_NAME_SIZE, "%d", slot->number);
-}
-
 static int pcie_init_slot(struct controller *ctrl)
 {
 	struct slot *slot;
@@ -1053,7 +1044,7 @@ static int pcie_init_slot(struct controller *ctrl)
 	slot->device = ctrl->slot_device_offset + slot->hp_slot;
 	slot->hpc_ops = ctrl->hpc_ops;
 	slot->number = ctrl->first_slot;
-	make_slot_name(slot);
+	snprintf(slot->name, SLOT_NAME_SIZE, "%d", slot->number);
 	mutex_init(&slot->lock);
 	INIT_DELAYED_WORK(&slot->work, pciehp_queue_pushbutton_work);
 	list_add(&slot->slot_list, &ctrl->slot_list);
@@ -1103,7 +1094,7 @@ static inline void dbg_ctrl(struct controller *ctrl)
 	dbg("  Power Indicator      : %3s\n", PWR_LED(ctrl)    ? "yes" : "no");
 	dbg("  Hot-Plug Surprise    : %3s\n", HP_SUPR_RM(ctrl) ? "yes" : "no");
 	dbg("  EMI Present          : %3s\n", EMI(ctrl)        ? "yes" : "no");
-	dbg("  Comamnd Completed    : %3s\n", NO_CMD_CMPL(ctrl)? "no" : "yes");
+	dbg("  Command Completed    : %3s\n", NO_CMD_CMPL(ctrl)? "no" : "yes");
 	pciehp_readw(ctrl, SLOTSTATUS, &reg16);
 	dbg("Slot Status            : 0x%04x\n", reg16);
 	pciehp_readw(ctrl, SLOTCTRL, &reg16);
diff --git a/drivers/pci/hotplug/shpchp_core.c b/drivers/pci/hotplug/shpchp_core.c
index a8cbd039b85b..cc38615395f1 100644
--- a/drivers/pci/hotplug/shpchp_core.c
+++ b/drivers/pci/hotplug/shpchp_core.c
@@ -39,7 +39,6 @@
 int shpchp_debug;
 int shpchp_poll_mode;
 int shpchp_poll_time;
-static int shpchp_slot_with_bus;
 struct workqueue_struct *shpchp_wq;
 
 #define DRIVER_VERSION	"0.4"
@@ -53,11 +52,9 @@ MODULE_LICENSE("GPL");
 module_param(shpchp_debug, bool, 0644);
 module_param(shpchp_poll_mode, bool, 0644);
 module_param(shpchp_poll_time, int, 0644);
-module_param(shpchp_slot_with_bus, bool, 0644);
 MODULE_PARM_DESC(shpchp_debug, "Debugging mode enabled or not");
 MODULE_PARM_DESC(shpchp_poll_mode, "Using polling mechanism for hot-plug events or not");
 MODULE_PARM_DESC(shpchp_poll_time, "Polling mechanism frequency, in seconds");
-MODULE_PARM_DESC(shpchp_slot_with_bus, "Use bus number in the slot name");
 
 #define SHPC_MODULE_NAME "shpchp"
 
@@ -99,23 +96,13 @@ static void release_slot(struct hotplug_slot *hotplug_slot)
 	kfree(slot);
 }
 
-static void make_slot_name(struct slot *slot)
-{
-	if (shpchp_slot_with_bus)
-		snprintf(slot->hotplug_slot->name, SLOT_NAME_SIZE, "%04d_%04d",
-			 slot->bus, slot->number);
-	else
-		snprintf(slot->hotplug_slot->name, SLOT_NAME_SIZE, "%d",
-			 slot->number);
-}
-
 static int init_slots(struct controller *ctrl)
 {
 	struct slot *slot;
 	struct hotplug_slot *hotplug_slot;
 	struct hotplug_slot_info *info;
 	int retval = -ENOMEM;
-	int i;
+	int i, len, dup = 1;
 
 	for (i = 0; i < ctrl->num_slots; i++) {
 		slot = kzalloc(sizeof(*slot), GFP_KERNEL);
@@ -146,7 +133,7 @@ static int init_slots(struct controller *ctrl)
 		/* register this slot with the hotplug pci core */
 		hotplug_slot->private = slot;
 		hotplug_slot->release = &release_slot;
-		make_slot_name(slot);
+		snprintf(slot->name, SLOT_NAME_SIZE, "%d", slot->number);
 		hotplug_slot->ops = &shpchp_hotplug_slot_ops;
 
 		get_power_status(hotplug_slot, &info->power_status);
@@ -157,14 +144,23 @@ static int init_slots(struct controller *ctrl)
 		dbg("Registering bus=%x dev=%x hp_slot=%x sun=%x "
 		    "slot_device_offset=%x\n", slot->bus, slot->device,
 		    slot->hp_slot, slot->number, ctrl->slot_device_offset);
+duplicate_name:
 		retval = pci_hp_register(slot->hotplug_slot,
 				ctrl->pci_dev->subordinate, slot->device);
 		if (retval) {
+			/*
+			 * If slot N already exists, we'll try to create
+			 * slot N-1, N-2 ... N-M, until we overflow.
+			 */
+			if (retval == -EEXIST) {
+				len = snprintf(slot->name, SLOT_NAME_SIZE,
+					       "%d-%d", slot->number, dup++);
+				if (len < SLOT_NAME_SIZE)
+					goto duplicate_name;
+				else
+					err("duplicate slot name overflow\n");
+			}
 			err("pci_hp_register failed with error %d\n", retval);
-			if (retval == -EEXIST)
-				err("Failed to register slot because of name "
-                                    "collision. Try \'shpchp_slot_with_bus\' "
-				    "module option.\n");
 			goto error_info;
 		}
 
diff --git a/drivers/pci/intel-iommu.c b/drivers/pci/intel-iommu.c
index 8d0e60ac849c..389fdd6f4a9f 100644
--- a/drivers/pci/intel-iommu.c
+++ b/drivers/pci/intel-iommu.c
@@ -49,8 +49,6 @@
 
 #define DEFAULT_DOMAIN_ADDRESS_WIDTH 48
 
-#define DMAR_OPERATION_TIMEOUT ((cycles_t) tsc_khz*10*1000) /* 10sec */
-
 #define DOMAIN_MAX_ADDR(gaw) ((((u64)1) << gaw) - 1)
 
 
@@ -58,8 +56,6 @@ static void flush_unmaps_timeout(unsigned long data);
 
 DEFINE_TIMER(unmap_timer,  flush_unmaps_timeout, 0, 0);
 
-static struct intel_iommu *g_iommus;
-
 #define HIGH_WATER_MARK 250
 struct deferred_flush_tables {
 	int next;
@@ -80,7 +76,7 @@ static long list_size;
 
 static void domain_remove_dev_info(struct dmar_domain *domain);
 
-static int dmar_disabled;
+int dmar_disabled;
 static int __initdata dmar_map_gfx = 1;
 static int dmar_forcedac;
 static int intel_iommu_strict;
@@ -185,13 +181,6 @@ void free_iova_mem(struct iova *iova)
 	kmem_cache_free(iommu_iova_cache, iova);
 }
 
-static inline void __iommu_flush_cache(
-	struct intel_iommu *iommu, void *addr, int size)
-{
-	if (!ecap_coherent(iommu->ecap))
-		clflush_cache_range(addr, size);
-}
-
 /* Gets context entry for a given bus and devfn */
 static struct context_entry * device_to_context_entry(struct intel_iommu *iommu,
 		u8 bus, u8 devfn)
@@ -488,19 +477,6 @@ static int iommu_alloc_root_entry(struct intel_iommu *iommu)
 	return 0;
 }
 
-#define IOMMU_WAIT_OP(iommu, offset, op, cond, sts) \
-{\
-	cycles_t start_time = get_cycles();\
-	while (1) {\
-		sts = op (iommu->reg + offset);\
-		if (cond)\
-			break;\
-		if (DMAR_OPERATION_TIMEOUT < (get_cycles() - start_time))\
-			panic("DMAR hardware is malfunctioning\n");\
-		cpu_relax();\
-	}\
-}
-
 static void iommu_set_root_entry(struct intel_iommu *iommu)
 {
 	void *addr;
@@ -990,6 +966,8 @@ static int iommu_init_domains(struct intel_iommu *iommu)
 		return -ENOMEM;
 	}
 
+	spin_lock_init(&iommu->lock);
+
 	/*
 	 * if Caching mode is set, then invalid translations are tagged
 	 * with domainid 0. Hence we need to pre-allocate it.
@@ -998,62 +976,15 @@ static int iommu_init_domains(struct intel_iommu *iommu)
 		set_bit(0, iommu->domain_ids);
 	return 0;
 }
-static struct intel_iommu *alloc_iommu(struct intel_iommu *iommu,
-					struct dmar_drhd_unit *drhd)
-{
-	int ret;
-	int map_size;
-	u32 ver;
-
-	iommu->reg = ioremap(drhd->reg_base_addr, PAGE_SIZE_4K);
-	if (!iommu->reg) {
-		printk(KERN_ERR "IOMMU: can't map the region\n");
-		goto error;
-	}
-	iommu->cap = dmar_readq(iommu->reg + DMAR_CAP_REG);
-	iommu->ecap = dmar_readq(iommu->reg + DMAR_ECAP_REG);
-
-	/* the registers might be more than one page */
-	map_size = max_t(int, ecap_max_iotlb_offset(iommu->ecap),
-		cap_max_fault_reg_offset(iommu->cap));
-	map_size = PAGE_ALIGN_4K(map_size);
-	if (map_size > PAGE_SIZE_4K) {
-		iounmap(iommu->reg);
-		iommu->reg = ioremap(drhd->reg_base_addr, map_size);
-		if (!iommu->reg) {
-			printk(KERN_ERR "IOMMU: can't map the region\n");
-			goto error;
-		}
-	}
-
-	ver = readl(iommu->reg + DMAR_VER_REG);
-	pr_debug("IOMMU %llx: ver %d:%d cap %llx ecap %llx\n",
-		drhd->reg_base_addr, DMAR_VER_MAJOR(ver), DMAR_VER_MINOR(ver),
-		iommu->cap, iommu->ecap);
-	ret = iommu_init_domains(iommu);
-	if (ret)
-		goto error_unmap;
-	spin_lock_init(&iommu->lock);
-	spin_lock_init(&iommu->register_lock);
 
-	drhd->iommu = iommu;
-	return iommu;
-error_unmap:
-	iounmap(iommu->reg);
-error:
-	kfree(iommu);
-	return NULL;
-}
 
 static void domain_exit(struct dmar_domain *domain);
-static void free_iommu(struct intel_iommu *iommu)
+
+void free_dmar_iommu(struct intel_iommu *iommu)
 {
 	struct dmar_domain *domain;
 	int i;
 
-	if (!iommu)
-		return;
-
 	i = find_first_bit(iommu->domain_ids, cap_ndoms(iommu->cap));
 	for (; i < cap_ndoms(iommu->cap); ) {
 		domain = iommu->domains[i];
@@ -1078,10 +1009,6 @@ static void free_iommu(struct intel_iommu *iommu)
 
 	/* free context mapping */
 	free_context_table(iommu);
-
-	if (iommu->reg)
-		iounmap(iommu->reg);
-	kfree(iommu);
 }
 
 static struct dmar_domain * iommu_alloc_domain(struct intel_iommu *iommu)
@@ -1426,37 +1353,6 @@ find_domain(struct pci_dev *pdev)
 	return NULL;
 }
 
-static int dmar_pci_device_match(struct pci_dev *devices[], int cnt,
-     struct pci_dev *dev)
-{
-	int index;
-
-	while (dev) {
-		for (index = 0; index < cnt; index++)
-			if (dev == devices[index])
-				return 1;
-
-		/* Check our parent */
-		dev = dev->bus->self;
-	}
-
-	return 0;
-}
-
-static struct dmar_drhd_unit *
-dmar_find_matched_drhd_unit(struct pci_dev *dev)
-{
-	struct dmar_drhd_unit *drhd = NULL;
-
-	list_for_each_entry(drhd, &dmar_drhd_units, list) {
-		if (drhd->include_all || dmar_pci_device_match(drhd->devices,
-						drhd->devices_cnt, dev))
-			return drhd;
-	}
-
-	return NULL;
-}
-
 /* domain is initialized */
 static struct dmar_domain *get_domain_for_dev(struct pci_dev *pdev, int gaw)
 {
@@ -1729,8 +1625,6 @@ int __init init_dmars(void)
 	 * endfor
 	 */
 	for_each_drhd_unit(drhd) {
-		if (drhd->ignored)
-			continue;
 		g_num_of_iommus++;
 		/*
 		 * lock not needed as this is only incremented in the single
@@ -1739,12 +1633,6 @@ int __init init_dmars(void)
 		 */
 	}
 
-	g_iommus = kzalloc(g_num_of_iommus * sizeof(*iommu), GFP_KERNEL);
-	if (!g_iommus) {
-		ret = -ENOMEM;
-		goto error;
-	}
-
 	deferred_flush = kzalloc(g_num_of_iommus *
 		sizeof(struct deferred_flush_tables), GFP_KERNEL);
 	if (!deferred_flush) {
@@ -1752,16 +1640,15 @@ int __init init_dmars(void)
 		goto error;
 	}
 
-	i = 0;
 	for_each_drhd_unit(drhd) {
 		if (drhd->ignored)
 			continue;
-		iommu = alloc_iommu(&g_iommus[i], drhd);
-		i++;
-		if (!iommu) {
-			ret = -ENOMEM;
+
+		iommu = drhd->iommu;
+
+		ret = iommu_init_domains(iommu);
+		if (ret)
 			goto error;
-		}
 
 		/*
 		 * TBD:
@@ -1845,7 +1732,6 @@ error:
 		iommu = drhd->iommu;
 		free_iommu(iommu);
 	}
-	kfree(g_iommus);
 	return ret;
 }
 
@@ -2002,7 +1888,10 @@ static void flush_unmaps(void)
 	/* just flush them all */
 	for (i = 0; i < g_num_of_iommus; i++) {
 		if (deferred_flush[i].next) {
-			iommu_flush_iotlb_global(&g_iommus[i], 0);
+			struct intel_iommu *iommu =
+				deferred_flush[i].domain[0]->iommu;
+
+			iommu_flush_iotlb_global(iommu, 0);
 			for (j = 0; j < deferred_flush[i].next; j++) {
 				__free_iova(&deferred_flush[i].domain[j]->iovad,
 						deferred_flush[i].iova[j]);
@@ -2032,7 +1921,8 @@ static void add_unmap(struct dmar_domain *dom, struct iova *iova)
 	if (list_size == HIGH_WATER_MARK)
 		flush_unmaps();
 
-	iommu_id = dom->iommu - g_iommus;
+	iommu_id = dom->iommu->seq_id;
+
 	next = deferred_flush[iommu_id].next;
 	deferred_flush[iommu_id].domain[next] = dom;
 	deferred_flush[iommu_id].iova[next] = iova;
@@ -2348,15 +2238,6 @@ static void __init iommu_exit_mempool(void)
 
 }
 
-void __init detect_intel_iommu(void)
-{
-	if (swiotlb || no_iommu || iommu_detected || dmar_disabled)
-		return;
-	if (early_dmar_detect()) {
-		iommu_detected = 1;
-	}
-}
-
 static void __init init_no_remapping_devices(void)
 {
 	struct dmar_drhd_unit *drhd;
@@ -2403,12 +2284,19 @@ int __init intel_iommu_init(void)
 {
 	int ret = 0;
 
-	if (no_iommu || swiotlb || dmar_disabled)
-		return -ENODEV;
-
 	if (dmar_table_init())
 		return 	-ENODEV;
 
+	if (dmar_dev_scope_init())
+		return 	-ENODEV;
+
+	/*
+	 * Check the need for DMA-remapping initialization now.
+	 * Above initialization will also be used by Interrupt-remapping.
+	 */
+	if (no_iommu || swiotlb || dmar_disabled)
+		return -ENODEV;
+
 	iommu_init_mempool();
 	dmar_init_reserved_ranges();
 
diff --git a/drivers/pci/intel-iommu.h b/drivers/pci/intel-iommu.h
index afc0ad96122e..2142c01e0143 100644
--- a/drivers/pci/intel-iommu.h
+++ b/drivers/pci/intel-iommu.h
@@ -27,19 +27,8 @@
 #include <linux/sysdev.h>
 #include "iova.h"
 #include <linux/io.h>
-
-/*
- * We need a fixed PAGE_SIZE of 4K irrespective of
- * arch PAGE_SIZE for IOMMU page tables.
- */
-#define PAGE_SHIFT_4K		(12)
-#define PAGE_SIZE_4K		(1UL << PAGE_SHIFT_4K)
-#define PAGE_MASK_4K		(((u64)-1) << PAGE_SHIFT_4K)
-#define PAGE_ALIGN_4K(addr)	(((addr) + PAGE_SIZE_4K - 1) & PAGE_MASK_4K)
-
-#define IOVA_PFN(addr)		((addr) >> PAGE_SHIFT_4K)
-#define DMA_32BIT_PFN		IOVA_PFN(DMA_32BIT_MASK)
-#define DMA_64BIT_PFN		IOVA_PFN(DMA_64BIT_MASK)
+#include <asm/cacheflush.h>
+#include "dma_remapping.h"
 
 /*
  * Intel IOMMU register specification per version 1.0 public spec.
@@ -63,6 +52,11 @@
 #define	DMAR_PLMLIMIT_REG 0x6c	/* PMRR low limit */
 #define	DMAR_PHMBASE_REG 0x70	/* pmrr high base addr */
 #define	DMAR_PHMLIMIT_REG 0x78	/* pmrr high limit */
+#define DMAR_IQH_REG	0x80	/* Invalidation queue head register */
+#define DMAR_IQT_REG	0x88	/* Invalidation queue tail register */
+#define DMAR_IQA_REG	0x90	/* Invalidation queue addr register */
+#define DMAR_ICS_REG	0x98	/* Invalidation complete status register */
+#define DMAR_IRTA_REG	0xb8    /* Interrupt remapping table addr register */
 
 #define OFFSET_STRIDE		(9)
 /*
@@ -126,6 +120,10 @@ static inline void dmar_writeq(void __iomem *addr, u64 val)
 #define ecap_max_iotlb_offset(e) \
 	(ecap_iotlb_offset(e) + ecap_niotlb_iunits(e) * 16)
 #define ecap_coherent(e)	((e) & 0x1)
+#define ecap_qis(e)		((e) & 0x2)
+#define ecap_eim_support(e)	((e >> 4) & 0x1)
+#define ecap_ir_support(e)	((e >> 3) & 0x1)
+#define ecap_max_handle_mask(e) ((e >> 20) & 0xf)
 
 
 /* IOTLB_REG */
@@ -141,6 +139,17 @@ static inline void dmar_writeq(void __iomem *addr, u64 val)
 #define DMA_TLB_IH_NONLEAF (((u64)1) << 6)
 #define DMA_TLB_MAX_SIZE (0x3f)
 
+/* INVALID_DESC */
+#define DMA_ID_TLB_GLOBAL_FLUSH	(((u64)1) << 3)
+#define DMA_ID_TLB_DSI_FLUSH	(((u64)2) << 3)
+#define DMA_ID_TLB_PSI_FLUSH	(((u64)3) << 3)
+#define DMA_ID_TLB_READ_DRAIN	(((u64)1) << 7)
+#define DMA_ID_TLB_WRITE_DRAIN	(((u64)1) << 6)
+#define DMA_ID_TLB_DID(id)	(((u64)((id & 0xffff) << 16)))
+#define DMA_ID_TLB_IH_NONLEAF	(((u64)1) << 6)
+#define DMA_ID_TLB_ADDR(addr)	(addr)
+#define DMA_ID_TLB_ADDR_MASK(mask)	(mask)
+
 /* PMEN_REG */
 #define DMA_PMEN_EPM (((u32)1)<<31)
 #define DMA_PMEN_PRS (((u32)1)<<0)
@@ -151,6 +160,9 @@ static inline void dmar_writeq(void __iomem *addr, u64 val)
 #define DMA_GCMD_SFL (((u32)1) << 29)
 #define DMA_GCMD_EAFL (((u32)1) << 28)
 #define DMA_GCMD_WBF (((u32)1) << 27)
+#define DMA_GCMD_QIE (((u32)1) << 26)
+#define DMA_GCMD_SIRTP (((u32)1) << 24)
+#define DMA_GCMD_IRE (((u32) 1) << 25)
 
 /* GSTS_REG */
 #define DMA_GSTS_TES (((u32)1) << 31)
@@ -158,6 +170,9 @@ static inline void dmar_writeq(void __iomem *addr, u64 val)
 #define DMA_GSTS_FLS (((u32)1) << 29)
 #define DMA_GSTS_AFLS (((u32)1) << 28)
 #define DMA_GSTS_WBFS (((u32)1) << 27)
+#define DMA_GSTS_QIES (((u32)1) << 26)
+#define DMA_GSTS_IRTPS (((u32)1) << 24)
+#define DMA_GSTS_IRES (((u32)1) << 25)
 
 /* CCMD_REG */
 #define DMA_CCMD_ICC (((u64)1) << 63)
@@ -187,158 +202,106 @@ static inline void dmar_writeq(void __iomem *addr, u64 val)
 #define dma_frcd_source_id(c) (c & 0xffff)
 #define dma_frcd_page_addr(d) (d & (((u64)-1) << 12)) /* low 64 bit */
 
-/*
- * 0: Present
- * 1-11: Reserved
- * 12-63: Context Ptr (12 - (haw-1))
- * 64-127: Reserved
- */
-struct root_entry {
-	u64	val;
-	u64	rsvd1;
-};
-#define ROOT_ENTRY_NR (PAGE_SIZE_4K/sizeof(struct root_entry))
-static inline bool root_present(struct root_entry *root)
-{
-	return (root->val & 1);
-}
-static inline void set_root_present(struct root_entry *root)
-{
-	root->val |= 1;
-}
-static inline void set_root_value(struct root_entry *root, unsigned long value)
-{
-	root->val |= value & PAGE_MASK_4K;
+#define DMAR_OPERATION_TIMEOUT ((cycles_t) tsc_khz*10*1000) /* 10sec */
+
+#define IOMMU_WAIT_OP(iommu, offset, op, cond, sts) \
+{\
+	cycles_t start_time = get_cycles();\
+	while (1) {\
+		sts = op (iommu->reg + offset);\
+		if (cond)\
+			break;\
+		if (DMAR_OPERATION_TIMEOUT < (get_cycles() - start_time))\
+			panic("DMAR hardware is malfunctioning\n");\
+		cpu_relax();\
+	}\
 }
 
-struct context_entry;
-static inline struct context_entry *
-get_context_addr_from_root(struct root_entry *root)
-{
-	return (struct context_entry *)
-		(root_present(root)?phys_to_virt(
-		root->val & PAGE_MASK_4K):
-		NULL);
-}
-
-/*
- * low 64 bits:
- * 0: present
- * 1: fault processing disable
- * 2-3: translation type
- * 12-63: address space root
- * high 64 bits:
- * 0-2: address width
- * 3-6: aval
- * 8-23: domain id
- */
-struct context_entry {
-	u64 lo;
-	u64 hi;
-};
-#define context_present(c) ((c).lo & 1)
-#define context_fault_disable(c) (((c).lo >> 1) & 1)
-#define context_translation_type(c) (((c).lo >> 2) & 3)
-#define context_address_root(c) ((c).lo & PAGE_MASK_4K)
-#define context_address_width(c) ((c).hi &  7)
-#define context_domain_id(c) (((c).hi >> 8) & ((1 << 16) - 1))
-
-#define context_set_present(c) do {(c).lo |= 1;} while (0)
-#define context_set_fault_enable(c) \
-	do {(c).lo &= (((u64)-1) << 2) | 1;} while (0)
-#define context_set_translation_type(c, val) \
-	do { \
-		(c).lo &= (((u64)-1) << 4) | 3; \
-		(c).lo |= ((val) & 3) << 2; \
-	} while (0)
-#define CONTEXT_TT_MULTI_LEVEL 0
-#define context_set_address_root(c, val) \
-	do {(c).lo |= (val) & PAGE_MASK_4K;} while (0)
-#define context_set_address_width(c, val) do {(c).hi |= (val) & 7;} while (0)
-#define context_set_domain_id(c, val) \
-	do {(c).hi |= ((val) & ((1 << 16) - 1)) << 8;} while (0)
-#define context_clear_entry(c) do {(c).lo = 0; (c).hi = 0;} while (0)
+#define QI_LENGTH	256	/* queue length */
 
-/*
- * 0: readable
- * 1: writable
- * 2-6: reserved
- * 7: super page
- * 8-11: available
- * 12-63: Host physcial address
- */
-struct dma_pte {
-	u64 val;
+enum {
+	QI_FREE,
+	QI_IN_USE,
+	QI_DONE
 };
-#define dma_clear_pte(p)	do {(p).val = 0;} while (0)
-
-#define DMA_PTE_READ (1)
-#define DMA_PTE_WRITE (2)
 
-#define dma_set_pte_readable(p) do {(p).val |= DMA_PTE_READ;} while (0)
-#define dma_set_pte_writable(p) do {(p).val |= DMA_PTE_WRITE;} while (0)
-#define dma_set_pte_prot(p, prot) \
-		do {(p).val = ((p).val & ~3) | ((prot) & 3); } while (0)
-#define dma_pte_addr(p) ((p).val & PAGE_MASK_4K)
-#define dma_set_pte_addr(p, addr) do {\
-		(p).val |= ((addr) & PAGE_MASK_4K); } while (0)
-#define dma_pte_present(p) (((p).val & 3) != 0)
+#define QI_CC_TYPE		0x1
+#define QI_IOTLB_TYPE		0x2
+#define QI_DIOTLB_TYPE		0x3
+#define QI_IEC_TYPE		0x4
+#define QI_IWD_TYPE		0x5
 
-struct intel_iommu;
+#define QI_IEC_SELECTIVE	(((u64)1) << 4)
+#define QI_IEC_IIDEX(idx)	(((u64)(idx & 0xffff) << 32))
+#define QI_IEC_IM(m)		(((u64)(m & 0x1f) << 27))
 
-struct dmar_domain {
-	int	id;			/* domain id */
-	struct intel_iommu *iommu;	/* back pointer to owning iommu */
+#define QI_IWD_STATUS_DATA(d)	(((u64)d) << 32)
+#define QI_IWD_STATUS_WRITE	(((u64)1) << 5)
 
-	struct list_head devices; 	/* all devices' list */
-	struct iova_domain iovad;	/* iova's that belong to this domain */
+struct qi_desc {
+	u64 low, high;
+};
 
-	struct dma_pte	*pgd;		/* virtual address */
-	spinlock_t	mapping_lock;	/* page table lock */
-	int		gaw;		/* max guest address width */
+struct q_inval {
+	spinlock_t      q_lock;
+	struct qi_desc  *desc;          /* invalidation queue */
+	int             *desc_status;   /* desc status */
+	int             free_head;      /* first free entry */
+	int             free_tail;      /* last free entry */
+	int             free_cnt;
+};
 
-	/* adjusted guest address width, 0 is level 2 30-bit */
-	int		agaw;
+#ifdef CONFIG_INTR_REMAP
+/* 1MB - maximum possible interrupt remapping table size */
+#define INTR_REMAP_PAGE_ORDER	8
+#define INTR_REMAP_TABLE_REG_SIZE	0xf
 
-#define DOMAIN_FLAG_MULTIPLE_DEVICES 1
-	int		flags;
-};
+#define INTR_REMAP_TABLE_ENTRIES	65536
 
-/* PCI domain-device relationship */
-struct device_domain_info {
-	struct list_head link;	/* link to domain siblings */
-	struct list_head global; /* link to global list */
-	u8 bus;			/* PCI bus numer */
-	u8 devfn;		/* PCI devfn number */
-	struct pci_dev *dev; /* it's NULL for PCIE-to-PCI bridge */
-	struct dmar_domain *domain; /* pointer to domain */
+struct ir_table {
+	struct irte *base;
 };
-
-extern int init_dmars(void);
+#endif
 
 struct intel_iommu {
 	void __iomem	*reg; /* Pointer to hardware regs, virtual addr */
 	u64		cap;
 	u64		ecap;
-	unsigned long 	*domain_ids; /* bitmap of domains */
-	struct dmar_domain **domains; /* ptr to domains */
 	int		seg;
 	u32		gcmd; /* Holds TE, EAFL. Don't need SRTP, SFL, WBF */
-	spinlock_t	lock; /* protect context, domain ids */
 	spinlock_t	register_lock; /* protect register handling */
+	int		seq_id;	/* sequence id of the iommu */
+
+#ifdef CONFIG_DMAR
+	unsigned long 	*domain_ids; /* bitmap of domains */
+	struct dmar_domain **domains; /* ptr to domains */
+	spinlock_t	lock; /* protect context, domain ids */
 	struct root_entry *root_entry; /* virtual address */
 
 	unsigned int irq;
 	unsigned char name[7];    /* Device Name */
 	struct msi_msg saved_msg;
 	struct sys_device sysdev;
+#endif
+	struct q_inval  *qi;            /* Queued invalidation info */
+#ifdef CONFIG_INTR_REMAP
+	struct ir_table *ir_table;	/* Interrupt remapping info */
+#endif
 };
 
-#ifndef CONFIG_DMAR_GFX_WA
-static inline void iommu_prepare_gfx_mapping(void)
+static inline void __iommu_flush_cache(
+	struct intel_iommu *iommu, void *addr, int size)
 {
-	return;
+	if (!ecap_coherent(iommu->ecap))
+		clflush_cache_range(addr, size);
 }
-#endif /* !CONFIG_DMAR_GFX_WA */
 
+extern struct dmar_drhd_unit * dmar_find_matched_drhd_unit(struct pci_dev *dev);
+
+extern int alloc_iommu(struct dmar_drhd_unit *drhd);
+extern void free_iommu(struct intel_iommu *iommu);
+extern int dmar_enable_qi(struct intel_iommu *iommu);
+extern void qi_global_iec(struct intel_iommu *iommu);
+
+extern void qi_submit_sync(struct qi_desc *desc, struct intel_iommu *iommu);
 #endif
diff --git a/drivers/pci/intr_remapping.c b/drivers/pci/intr_remapping.c
new file mode 100644
index 000000000000..bb642cc5e18c
--- /dev/null
+++ b/drivers/pci/intr_remapping.c
@@ -0,0 +1,471 @@
+#include <linux/dmar.h>
+#include <linux/spinlock.h>
+#include <linux/jiffies.h>
+#include <linux/pci.h>
+#include <linux/irq.h>
+#include <asm/io_apic.h>
+#include "intel-iommu.h"
+#include "intr_remapping.h"
+
+static struct ioapic_scope ir_ioapic[MAX_IO_APICS];
+static int ir_ioapic_num;
+int intr_remapping_enabled;
+
+static struct {
+	struct intel_iommu *iommu;
+	u16 irte_index;
+	u16 sub_handle;
+	u8  irte_mask;
+} irq_2_iommu[NR_IRQS];
+
+static DEFINE_SPINLOCK(irq_2_ir_lock);
+
+int irq_remapped(int irq)
+{
+	if (irq > NR_IRQS)
+		return 0;
+
+	if (!irq_2_iommu[irq].iommu)
+		return 0;
+
+	return 1;
+}
+
+int get_irte(int irq, struct irte *entry)
+{
+	int index;
+
+	if (!entry || irq > NR_IRQS)
+		return -1;
+
+	spin_lock(&irq_2_ir_lock);
+	if (!irq_2_iommu[irq].iommu) {
+		spin_unlock(&irq_2_ir_lock);
+		return -1;
+	}
+
+	index = irq_2_iommu[irq].irte_index + irq_2_iommu[irq].sub_handle;
+	*entry = *(irq_2_iommu[irq].iommu->ir_table->base + index);
+
+	spin_unlock(&irq_2_ir_lock);
+	return 0;
+}
+
+int alloc_irte(struct intel_iommu *iommu, int irq, u16 count)
+{
+	struct ir_table *table = iommu->ir_table;
+	u16 index, start_index;
+	unsigned int mask = 0;
+	int i;
+
+	if (!count)
+		return -1;
+
+	/*
+	 * start the IRTE search from index 0.
+	 */
+	index = start_index = 0;
+
+	if (count > 1) {
+		count = __roundup_pow_of_two(count);
+		mask = ilog2(count);
+	}
+
+	if (mask > ecap_max_handle_mask(iommu->ecap)) {
+		printk(KERN_ERR
+		       "Requested mask %x exceeds the max invalidation handle"
+		       " mask value %Lx\n", mask,
+		       ecap_max_handle_mask(iommu->ecap));
+		return -1;
+	}
+
+	spin_lock(&irq_2_ir_lock);
+	do {
+		for (i = index; i < index + count; i++)
+			if  (table->base[i].present)
+				break;
+		/* empty index found */
+		if (i == index + count)
+			break;
+
+		index = (index + count) % INTR_REMAP_TABLE_ENTRIES;
+
+		if (index == start_index) {
+			spin_unlock(&irq_2_ir_lock);
+			printk(KERN_ERR "can't allocate an IRTE\n");
+			return -1;
+		}
+	} while (1);
+
+	for (i = index; i < index + count; i++)
+		table->base[i].present = 1;
+
+	irq_2_iommu[irq].iommu = iommu;
+	irq_2_iommu[irq].irte_index =  index;
+	irq_2_iommu[irq].sub_handle = 0;
+	irq_2_iommu[irq].irte_mask = mask;
+
+	spin_unlock(&irq_2_ir_lock);
+
+	return index;
+}
+
+static void qi_flush_iec(struct intel_iommu *iommu, int index, int mask)
+{
+	struct qi_desc desc;
+
+	desc.low = QI_IEC_IIDEX(index) | QI_IEC_TYPE | QI_IEC_IM(mask)
+		   | QI_IEC_SELECTIVE;
+	desc.high = 0;
+
+	qi_submit_sync(&desc, iommu);
+}
+
+int map_irq_to_irte_handle(int irq, u16 *sub_handle)
+{
+	int index;
+
+	spin_lock(&irq_2_ir_lock);
+	if (irq >= NR_IRQS || !irq_2_iommu[irq].iommu) {
+		spin_unlock(&irq_2_ir_lock);
+		return -1;
+	}
+
+	*sub_handle = irq_2_iommu[irq].sub_handle;
+	index = irq_2_iommu[irq].irte_index;
+	spin_unlock(&irq_2_ir_lock);
+	return index;
+}
+
+int set_irte_irq(int irq, struct intel_iommu *iommu, u16 index, u16 subhandle)
+{
+	spin_lock(&irq_2_ir_lock);
+	if (irq >= NR_IRQS || irq_2_iommu[irq].iommu) {
+		spin_unlock(&irq_2_ir_lock);
+		return -1;
+	}
+
+	irq_2_iommu[irq].iommu = iommu;
+	irq_2_iommu[irq].irte_index = index;
+	irq_2_iommu[irq].sub_handle = subhandle;
+	irq_2_iommu[irq].irte_mask = 0;
+
+	spin_unlock(&irq_2_ir_lock);
+
+	return 0;
+}
+
+int clear_irte_irq(int irq, struct intel_iommu *iommu, u16 index)
+{
+	spin_lock(&irq_2_ir_lock);
+	if (irq >= NR_IRQS || !irq_2_iommu[irq].iommu) {
+		spin_unlock(&irq_2_ir_lock);
+		return -1;
+	}
+
+	irq_2_iommu[irq].iommu = NULL;
+	irq_2_iommu[irq].irte_index = 0;
+	irq_2_iommu[irq].sub_handle = 0;
+	irq_2_iommu[irq].irte_mask = 0;
+
+	spin_unlock(&irq_2_ir_lock);
+
+	return 0;
+}
+
+int modify_irte(int irq, struct irte *irte_modified)
+{
+	int index;
+	struct irte *irte;
+	struct intel_iommu *iommu;
+
+	spin_lock(&irq_2_ir_lock);
+	if (irq >= NR_IRQS || !irq_2_iommu[irq].iommu) {
+		spin_unlock(&irq_2_ir_lock);
+		return -1;
+	}
+
+	iommu = irq_2_iommu[irq].iommu;
+
+	index = irq_2_iommu[irq].irte_index + irq_2_iommu[irq].sub_handle;
+	irte = &iommu->ir_table->base[index];
+
+	set_64bit((unsigned long *)irte, irte_modified->low | (1 << 1));
+	__iommu_flush_cache(iommu, irte, sizeof(*irte));
+
+	qi_flush_iec(iommu, index, 0);
+
+	spin_unlock(&irq_2_ir_lock);
+	return 0;
+}
+
+int flush_irte(int irq)
+{
+	int index;
+	struct intel_iommu *iommu;
+
+	spin_lock(&irq_2_ir_lock);
+	if (irq >= NR_IRQS || !irq_2_iommu[irq].iommu) {
+		spin_unlock(&irq_2_ir_lock);
+		return -1;
+	}
+
+	iommu = irq_2_iommu[irq].iommu;
+
+	index = irq_2_iommu[irq].irte_index + irq_2_iommu[irq].sub_handle;
+
+	qi_flush_iec(iommu, index, irq_2_iommu[irq].irte_mask);
+	spin_unlock(&irq_2_ir_lock);
+
+	return 0;
+}
+
+struct intel_iommu *map_ioapic_to_ir(int apic)
+{
+	int i;
+
+	for (i = 0; i < MAX_IO_APICS; i++)
+		if (ir_ioapic[i].id == apic)
+			return ir_ioapic[i].iommu;
+	return NULL;
+}
+
+struct intel_iommu *map_dev_to_ir(struct pci_dev *dev)
+{
+	struct dmar_drhd_unit *drhd;
+
+	drhd = dmar_find_matched_drhd_unit(dev);
+	if (!drhd)
+		return NULL;
+
+	return drhd->iommu;
+}
+
+int free_irte(int irq)
+{
+	int index, i;
+	struct irte *irte;
+	struct intel_iommu *iommu;
+
+	spin_lock(&irq_2_ir_lock);
+	if (irq >= NR_IRQS || !irq_2_iommu[irq].iommu) {
+		spin_unlock(&irq_2_ir_lock);
+		return -1;
+	}
+
+	iommu = irq_2_iommu[irq].iommu;
+
+	index = irq_2_iommu[irq].irte_index + irq_2_iommu[irq].sub_handle;
+	irte = &iommu->ir_table->base[index];
+
+	if (!irq_2_iommu[irq].sub_handle) {
+		for (i = 0; i < (1 << irq_2_iommu[irq].irte_mask); i++)
+			set_64bit((unsigned long *)irte, 0);
+		qi_flush_iec(iommu, index, irq_2_iommu[irq].irte_mask);
+	}
+
+	irq_2_iommu[irq].iommu = NULL;
+	irq_2_iommu[irq].irte_index = 0;
+	irq_2_iommu[irq].sub_handle = 0;
+	irq_2_iommu[irq].irte_mask = 0;
+
+	spin_unlock(&irq_2_ir_lock);
+
+	return 0;
+}
+
+static void iommu_set_intr_remapping(struct intel_iommu *iommu, int mode)
+{
+	u64 addr;
+	u32 cmd, sts;
+	unsigned long flags;
+
+	addr = virt_to_phys((void *)iommu->ir_table->base);
+
+	spin_lock_irqsave(&iommu->register_lock, flags);
+
+	dmar_writeq(iommu->reg + DMAR_IRTA_REG,
+		    (addr) | IR_X2APIC_MODE(mode) | INTR_REMAP_TABLE_REG_SIZE);
+
+	/* Set interrupt-remapping table pointer */
+	cmd = iommu->gcmd | DMA_GCMD_SIRTP;
+	writel(cmd, iommu->reg + DMAR_GCMD_REG);
+
+	IOMMU_WAIT_OP(iommu, DMAR_GSTS_REG,
+		      readl, (sts & DMA_GSTS_IRTPS), sts);
+	spin_unlock_irqrestore(&iommu->register_lock, flags);
+
+	/*
+	 * global invalidation of interrupt entry cache before enabling
+	 * interrupt-remapping.
+	 */
+	qi_global_iec(iommu);
+
+	spin_lock_irqsave(&iommu->register_lock, flags);
+
+	/* Enable interrupt-remapping */
+	cmd = iommu->gcmd | DMA_GCMD_IRE;
+	iommu->gcmd |= DMA_GCMD_IRE;
+	writel(cmd, iommu->reg + DMAR_GCMD_REG);
+
+	IOMMU_WAIT_OP(iommu, DMAR_GSTS_REG,
+		      readl, (sts & DMA_GSTS_IRES), sts);
+
+	spin_unlock_irqrestore(&iommu->register_lock, flags);
+}
+
+
+static int setup_intr_remapping(struct intel_iommu *iommu, int mode)
+{
+	struct ir_table *ir_table;
+	struct page *pages;
+
+	ir_table = iommu->ir_table = kzalloc(sizeof(struct ir_table),
+					     GFP_KERNEL);
+
+	if (!iommu->ir_table)
+		return -ENOMEM;
+
+	pages = alloc_pages(GFP_KERNEL | __GFP_ZERO, INTR_REMAP_PAGE_ORDER);
+
+	if (!pages) {
+		printk(KERN_ERR "failed to allocate pages of order %d\n",
+		       INTR_REMAP_PAGE_ORDER);
+		kfree(iommu->ir_table);
+		return -ENOMEM;
+	}
+
+	ir_table->base = page_address(pages);
+
+	iommu_set_intr_remapping(iommu, mode);
+	return 0;
+}
+
+int __init enable_intr_remapping(int eim)
+{
+	struct dmar_drhd_unit *drhd;
+	int setup = 0;
+
+	/*
+	 * check for the Interrupt-remapping support
+	 */
+	for_each_drhd_unit(drhd) {
+		struct intel_iommu *iommu = drhd->iommu;
+
+		if (!ecap_ir_support(iommu->ecap))
+			continue;
+
+		if (eim && !ecap_eim_support(iommu->ecap)) {
+			printk(KERN_INFO "DRHD %Lx: EIM not supported by DRHD, "
+			       " ecap %Lx\n", drhd->reg_base_addr, iommu->ecap);
+			return -1;
+		}
+	}
+
+	/*
+	 * Enable queued invalidation for all the DRHD's.
+	 */
+	for_each_drhd_unit(drhd) {
+		int ret;
+		struct intel_iommu *iommu = drhd->iommu;
+		ret = dmar_enable_qi(iommu);
+
+		if (ret) {
+			printk(KERN_ERR "DRHD %Lx: failed to enable queued, "
+			       " invalidation, ecap %Lx, ret %d\n",
+			       drhd->reg_base_addr, iommu->ecap, ret);
+			return -1;
+		}
+	}
+
+	/*
+	 * Setup Interrupt-remapping for all the DRHD's now.
+	 */
+	for_each_drhd_unit(drhd) {
+		struct intel_iommu *iommu = drhd->iommu;
+
+		if (!ecap_ir_support(iommu->ecap))
+			continue;
+
+		if (setup_intr_remapping(iommu, eim))
+			goto error;
+
+		setup = 1;
+	}
+
+	if (!setup)
+		goto error;
+
+	intr_remapping_enabled = 1;
+
+	return 0;
+
+error:
+	/*
+	 * handle error condition gracefully here!
+	 */
+	return -1;
+}
+
+static int ir_parse_ioapic_scope(struct acpi_dmar_header *header,
+				 struct intel_iommu *iommu)
+{
+	struct acpi_dmar_hardware_unit *drhd;
+	struct acpi_dmar_device_scope *scope;
+	void *start, *end;
+
+	drhd = (struct acpi_dmar_hardware_unit *)header;
+
+	start = (void *)(drhd + 1);
+	end = ((void *)drhd) + header->length;
+
+	while (start < end) {
+		scope = start;
+		if (scope->entry_type == ACPI_DMAR_SCOPE_TYPE_IOAPIC) {
+			if (ir_ioapic_num == MAX_IO_APICS) {
+				printk(KERN_WARNING "Exceeded Max IO APICS\n");
+				return -1;
+			}
+
+			printk(KERN_INFO "IOAPIC id %d under DRHD base"
+			       " 0x%Lx\n", scope->enumeration_id,
+			       drhd->address);
+
+			ir_ioapic[ir_ioapic_num].iommu = iommu;
+			ir_ioapic[ir_ioapic_num].id = scope->enumeration_id;
+			ir_ioapic_num++;
+		}
+		start += scope->length;
+	}
+
+	return 0;
+}
+
+/*
+ * Finds the assocaition between IOAPIC's and its Interrupt-remapping
+ * hardware unit.
+ */
+int __init parse_ioapics_under_ir(void)
+{
+	struct dmar_drhd_unit *drhd;
+	int ir_supported = 0;
+
+	for_each_drhd_unit(drhd) {
+		struct intel_iommu *iommu = drhd->iommu;
+
+		if (ecap_ir_support(iommu->ecap)) {
+			if (ir_parse_ioapic_scope(drhd->hdr, iommu))
+				return -1;
+
+			ir_supported = 1;
+		}
+	}
+
+	if (ir_supported && ir_ioapic_num != nr_ioapics) {
+		printk(KERN_WARNING
+		       "Not all IO-APIC's listed under remapping hardware\n");
+		return -1;
+	}
+
+	return ir_supported;
+}
diff --git a/drivers/pci/intr_remapping.h b/drivers/pci/intr_remapping.h
new file mode 100644
index 000000000000..05f2635bbe4e
--- /dev/null
+++ b/drivers/pci/intr_remapping.h
@@ -0,0 +1,8 @@
+#include "intel-iommu.h"
+
+struct ioapic_scope {
+	struct intel_iommu *iommu;
+	unsigned int id;
+};
+
+#define IR_X2APIC_MODE(mode) (mode ? (1 << 11) : 0)
diff --git a/drivers/pci/msi.c b/drivers/pci/msi.c
index 15af618d36e2..4a10b5624f72 100644
--- a/drivers/pci/msi.c
+++ b/drivers/pci/msi.c
@@ -126,7 +126,16 @@ static void msix_flush_writes(unsigned int irq)
 	}
 }
 
-static void msi_set_mask_bits(unsigned int irq, u32 mask, u32 flag)
+/*
+ * PCI 2.3 does not specify mask bits for each MSI interrupt.  Attempting to
+ * mask all MSI interrupts by clearing the MSI enable bit does not work
+ * reliably as devices without an INTx disable bit will then generate a
+ * level IRQ which will never be cleared.
+ *
+ * Returns 1 if it succeeded in masking the interrupt and 0 if the device
+ * doesn't support MSI masking.
+ */
+static int msi_set_mask_bits(unsigned int irq, u32 mask, u32 flag)
 {
 	struct msi_desc *entry;
 
@@ -144,8 +153,7 @@ static void msi_set_mask_bits(unsigned int irq, u32 mask, u32 flag)
 			mask_bits |= flag & mask;
 			pci_write_config_dword(entry->dev, pos, mask_bits);
 		} else {
-			__msi_set_enable(entry->dev, entry->msi_attrib.pos,
-					 !flag);
+			return 0;
 		}
 		break;
 	case PCI_CAP_ID_MSIX:
@@ -161,6 +169,7 @@ static void msi_set_mask_bits(unsigned int irq, u32 mask, u32 flag)
 		break;
 	}
 	entry->msi_attrib.masked = !!flag;
+	return 1;
 }
 
 void read_msi_msg(unsigned int irq, struct msi_msg *msg)
@@ -299,9 +308,8 @@ static void __pci_restore_msi_state(struct pci_dev *dev)
 				  entry->msi_attrib.masked);
 
 	pci_read_config_word(dev, pos + PCI_MSI_FLAGS, &control);
-	control &= ~(PCI_MSI_FLAGS_QSIZE | PCI_MSI_FLAGS_ENABLE);
-	if (entry->msi_attrib.maskbit || !entry->msi_attrib.masked)
-		control |= PCI_MSI_FLAGS_ENABLE;
+	control &= ~PCI_MSI_FLAGS_QSIZE;
+	control |= PCI_MSI_FLAGS_ENABLE;
 	pci_write_config_word(dev, pos + PCI_MSI_FLAGS, control);
 }
 
diff --git a/drivers/pci/pci-acpi.c b/drivers/pci/pci-acpi.c
index 7764768b6a0e..89a2f0fa10f9 100644
--- a/drivers/pci/pci-acpi.c
+++ b/drivers/pci/pci-acpi.c
@@ -11,6 +11,7 @@
 #include <linux/init.h>
 #include <linux/pci.h>
 #include <linux/module.h>
+#include <linux/pci-aspm.h>
 #include <acpi/acpi.h>
 #include <acpi/acnamesp.h>
 #include <acpi/acresrc.h>
@@ -372,6 +373,12 @@ static int __init acpi_pci_init(void)
 		printk(KERN_INFO"ACPI FADT declares the system doesn't support MSI, so disable it\n");
 		pci_no_msi();
 	}
+
+	if (acpi_gbl_FADT.boot_flags & BAF_PCIE_ASPM_CONTROL) {
+		printk(KERN_INFO"ACPI FADT declares the system doesn't support PCIe ASPM, so disable it\n");
+		pcie_no_aspm();
+	}
+
 	ret = register_acpi_bus_type(&acpi_pci_bus);
 	if (ret)
 		return 0;
diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
index e9c356236d27..c9884bba22de 100644
--- a/drivers/pci/pci.c
+++ b/drivers/pci/pci.c
@@ -572,6 +572,10 @@ int pci_set_power_state(struct pci_dev *dev, pci_power_t state)
 		if (!ret)
 			pci_update_current_state(dev);
 	}
+	/* This device is quirked not to be put into D3, so
+	   don't put it in D3 */
+	if (state == PCI_D3hot && (dev->dev_flags & PCI_DEV_FLAGS_NO_D3))
+		return 0;
 
 	error = pci_raw_set_power_state(dev, state);
 
@@ -1056,7 +1060,7 @@ bool pci_pme_capable(struct pci_dev *dev, pci_power_t state)
  * The caller must verify that the device is capable of generating PME# before
  * calling this function with @enable equal to 'true'.
  */
-static void pci_pme_active(struct pci_dev *dev, bool enable)
+void pci_pme_active(struct pci_dev *dev, bool enable)
 {
 	u16 pmcsr;
 
@@ -1123,6 +1127,12 @@ int pci_enable_wake(struct pci_dev *dev, pci_power_t state, int enable)
 }
 
 /**
+ * pci_target_state - find an appropriate low power state for a given PCI dev
+ * @dev: PCI device
+ *
+ * Use underlying platform code to find a supported low power state for @dev.
+ * If the platform can't manage @dev, return the deepest state from which it
+ * can generate wake events, based on any available PME info.
  */
 pci_power_t pci_target_state(struct pci_dev *dev)
 {
@@ -1931,6 +1941,7 @@ EXPORT_SYMBOL(pci_set_power_state);
 EXPORT_SYMBOL(pci_save_state);
 EXPORT_SYMBOL(pci_restore_state);
 EXPORT_SYMBOL(pci_pme_capable);
+EXPORT_SYMBOL(pci_pme_active);
 EXPORT_SYMBOL(pci_enable_wake);
 EXPORT_SYMBOL(pci_target_state);
 EXPORT_SYMBOL(pci_prepare_to_sleep);
diff --git a/drivers/pci/pcie/aer/aerdrv_acpi.c b/drivers/pci/pcie/aer/aerdrv_acpi.c
index 30f581b8791f..6dd7b13e9808 100644
--- a/drivers/pci/pcie/aer/aerdrv_acpi.c
+++ b/drivers/pci/pcie/aer/aerdrv_acpi.c
@@ -36,12 +36,7 @@ int aer_osc_setup(struct pcie_device *pciedev)
 	if (acpi_pci_disabled)
 		return -1;
 
-	/* Find root host bridge */
-	while (pdev->bus->self)
-		pdev = pdev->bus->self;
-	handle = acpi_get_pci_rootbridge_handle(
-		pci_domain_nr(pdev->bus), pdev->bus->number);
-
+	handle = acpi_find_root_bridge_handle(pdev);
 	if (handle) {
 		pcie_osc_support_set(OSC_EXT_PCI_CONFIG_SUPPORT);
 		status = pci_osc_control_set(handle,
diff --git a/drivers/pci/pcie/aspm.c b/drivers/pci/pcie/aspm.c
index f82495583e63..9a7c9e1408a4 100644
--- a/drivers/pci/pcie/aspm.c
+++ b/drivers/pci/pcie/aspm.c
@@ -55,7 +55,7 @@ struct pcie_link_state {
 	struct endpoint_state endpoints[8];
 };
 
-static int aspm_disabled;
+static int aspm_disabled, aspm_force;
 static DEFINE_MUTEX(aspm_lock);
 static LIST_HEAD(link_list);
 
@@ -510,6 +510,7 @@ static int pcie_aspm_sanity_check(struct pci_dev *pdev)
 {
 	struct pci_dev *child_dev;
 	int child_pos;
+	u32 reg32;
 
 	/*
 	 * Some functions in a slot might not all be PCIE functions, very
@@ -519,6 +520,19 @@ static int pcie_aspm_sanity_check(struct pci_dev *pdev)
 		child_pos = pci_find_capability(child_dev, PCI_CAP_ID_EXP);
 		if (!child_pos)
 			return -EINVAL;
+
+		/*
+		 * Disable ASPM for pre-1.1 PCIe device, we follow MS to use
+		 * RBER bit to determine if a function is 1.1 version device
+		 */
+		pci_read_config_dword(child_dev, child_pos + PCI_EXP_DEVCAP,
+			&reg32);
+		if (!(reg32 & PCI_EXP_DEVCAP_RBER && !aspm_force)) {
+			printk("Pre-1.1 PCIe device detected, "
+				"disable ASPM for %s. It can be enabled forcedly"
+				" with 'pcie_aspm=force'\n", pci_name(pdev));
+			return -EINVAL;
+		}
 	}
 	return 0;
 }
@@ -802,11 +816,23 @@ void pcie_aspm_remove_sysfs_dev_files(struct pci_dev *pdev)
 
 static int __init pcie_aspm_disable(char *str)
 {
-	aspm_disabled = 1;
+	if (!strcmp(str, "off")) {
+		aspm_disabled = 1;
+		printk(KERN_INFO "PCIe ASPM is disabled\n");
+	} else if (!strcmp(str, "force")) {
+		aspm_force = 1;
+		printk(KERN_INFO "PCIe ASPM is forcedly enabled\n");
+	}
 	return 1;
 }
 
-__setup("pcie_noaspm", pcie_aspm_disable);
+__setup("pcie_aspm=", pcie_aspm_disable);
+
+void pcie_no_aspm(void)
+{
+	if (!aspm_force)
+		aspm_disabled = 1;
+}
 
 #ifdef CONFIG_ACPI
 #include <acpi/acpi_bus.h>
diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c
index b1724cf31b66..cce2f4cb1fbf 100644
--- a/drivers/pci/probe.c
+++ b/drivers/pci/probe.c
@@ -52,27 +52,49 @@ EXPORT_SYMBOL(no_pci_devices);
  * Some platforms allow access to legacy I/O port and ISA memory space on
  * a per-bus basis.  This routine creates the files and ties them into
  * their associated read, write and mmap files from pci-sysfs.c
+ *
+ * On error unwind, but don't propogate the error to the caller
+ * as it is ok to set up the PCI bus without these files.
  */
 static void pci_create_legacy_files(struct pci_bus *b)
 {
+	int error;
+
 	b->legacy_io = kzalloc(sizeof(struct bin_attribute) * 2,
 			       GFP_ATOMIC);
-	if (b->legacy_io) {
-		b->legacy_io->attr.name = "legacy_io";
-		b->legacy_io->size = 0xffff;
-		b->legacy_io->attr.mode = S_IRUSR | S_IWUSR;
-		b->legacy_io->read = pci_read_legacy_io;
-		b->legacy_io->write = pci_write_legacy_io;
-		device_create_bin_file(&b->dev, b->legacy_io);
-
-		/* Allocated above after the legacy_io struct */
-		b->legacy_mem = b->legacy_io + 1;
-		b->legacy_mem->attr.name = "legacy_mem";
-		b->legacy_mem->size = 1024*1024;
-		b->legacy_mem->attr.mode = S_IRUSR | S_IWUSR;
-		b->legacy_mem->mmap = pci_mmap_legacy_mem;
-		device_create_bin_file(&b->dev, b->legacy_mem);
-	}
+	if (!b->legacy_io)
+		goto kzalloc_err;
+
+	b->legacy_io->attr.name = "legacy_io";
+	b->legacy_io->size = 0xffff;
+	b->legacy_io->attr.mode = S_IRUSR | S_IWUSR;
+	b->legacy_io->read = pci_read_legacy_io;
+	b->legacy_io->write = pci_write_legacy_io;
+	error = device_create_bin_file(&b->dev, b->legacy_io);
+	if (error)
+		goto legacy_io_err;
+
+	/* Allocated above after the legacy_io struct */
+	b->legacy_mem = b->legacy_io + 1;
+	b->legacy_mem->attr.name = "legacy_mem";
+	b->legacy_mem->size = 1024*1024;
+	b->legacy_mem->attr.mode = S_IRUSR | S_IWUSR;
+	b->legacy_mem->mmap = pci_mmap_legacy_mem;
+	error = device_create_bin_file(&b->dev, b->legacy_mem);
+	if (error)
+		goto legacy_mem_err;
+
+	return;
+
+legacy_mem_err:
+	device_remove_bin_file(&b->dev, b->legacy_io);
+legacy_io_err:
+	kfree(b->legacy_io);
+	b->legacy_io = NULL;
+kzalloc_err:
+	printk(KERN_WARNING "pci: warning: could not create legacy I/O port "
+	       "and ISA memory resources to sysfs\n");
+	return;
 }
 
 void pci_remove_legacy_files(struct pci_bus *b)
@@ -163,12 +185,9 @@ static inline unsigned int pci_calc_resource_flags(unsigned int flags)
 	return IORESOURCE_MEM;
 }
 
-/*
- * Find the extent of a PCI decode..
- */
-static u32 pci_size(u32 base, u32 maxbase, u32 mask)
+static u64 pci_size(u64 base, u64 maxbase, u64 mask)
 {
-	u32 size = mask & maxbase;	/* Find the significant bits */
+	u64 size = mask & maxbase;	/* Find the significant bits */
 	if (!size)
 		return 0;
 
@@ -184,135 +203,142 @@ static u32 pci_size(u32 base, u32 maxbase, u32 mask)
 	return size;
 }
 
-static u64 pci_size64(u64 base, u64 maxbase, u64 mask)
+enum pci_bar_type {
+	pci_bar_unknown,	/* Standard PCI BAR probe */
+	pci_bar_io,		/* An io port BAR */
+	pci_bar_mem32,		/* A 32-bit memory BAR */
+	pci_bar_mem64,		/* A 64-bit memory BAR */
+};
+
+static inline enum pci_bar_type decode_bar(struct resource *res, u32 bar)
 {
-	u64 size = mask & maxbase;	/* Find the significant bits */
-	if (!size)
-		return 0;
+	if ((bar & PCI_BASE_ADDRESS_SPACE) == PCI_BASE_ADDRESS_SPACE_IO) {
+		res->flags = bar & ~PCI_BASE_ADDRESS_IO_MASK;
+		return pci_bar_io;
+	}
 
-	/* Get the lowest of them to find the decode size, and
-	   from that the extent.  */
-	size = (size & ~(size-1)) - 1;
+	res->flags = bar & ~PCI_BASE_ADDRESS_MEM_MASK;
 
-	/* base == maxbase can be valid only if the BAR has
-	   already been programmed with all 1s.  */
-	if (base == maxbase && ((base | size) & mask) != mask)
-		return 0;
-
-	return size;
+	if (res->flags == PCI_BASE_ADDRESS_MEM_TYPE_64)
+		return pci_bar_mem64;
+	return pci_bar_mem32;
 }
 
-static inline int is_64bit_memory(u32 mask)
+/*
+ * If the type is not unknown, we assume that the lowest bit is 'enable'.
+ * Returns 1 if the BAR was 64-bit and 0 if it was 32-bit.
+ */
+static int __pci_read_base(struct pci_dev *dev, enum pci_bar_type type,
+			struct resource *res, unsigned int pos)
 {
-	if ((mask & (PCI_BASE_ADDRESS_SPACE|PCI_BASE_ADDRESS_MEM_TYPE_MASK)) ==
-	    (PCI_BASE_ADDRESS_SPACE_MEMORY|PCI_BASE_ADDRESS_MEM_TYPE_64))
-		return 1;
-	return 0;
-}
+	u32 l, sz, mask;
 
-static void pci_read_bases(struct pci_dev *dev, unsigned int howmany, int rom)
-{
-	unsigned int pos, reg, next;
-	u32 l, sz;
-	struct resource *res;
+	mask = type ? ~PCI_ROM_ADDRESS_ENABLE : ~0;
 
-	for(pos=0; pos<howmany; pos = next) {
-		u64 l64;
-		u64 sz64;
-		u32 raw_sz;
+	res->name = pci_name(dev);
 
-		next = pos+1;
-		res = &dev->resource[pos];
-		res->name = pci_name(dev);
-		reg = PCI_BASE_ADDRESS_0 + (pos << 2);
-		pci_read_config_dword(dev, reg, &l);
-		pci_write_config_dword(dev, reg, ~0);
-		pci_read_config_dword(dev, reg, &sz);
-		pci_write_config_dword(dev, reg, l);
-		if (!sz || sz == 0xffffffff)
-			continue;
-		if (l == 0xffffffff)
-			l = 0;
-		raw_sz = sz;
-		if ((l & PCI_BASE_ADDRESS_SPACE) ==
-				PCI_BASE_ADDRESS_SPACE_MEMORY) {
-			sz = pci_size(l, sz, (u32)PCI_BASE_ADDRESS_MEM_MASK);
-			/*
-			 * For 64bit prefetchable memory sz could be 0, if the
-			 * real size is bigger than 4G, so we need to check
-			 * szhi for that.
-			 */
-			if (!is_64bit_memory(l) && !sz)
-				continue;
-			res->start = l & PCI_BASE_ADDRESS_MEM_MASK;
-			res->flags |= l & ~PCI_BASE_ADDRESS_MEM_MASK;
+	pci_read_config_dword(dev, pos, &l);
+	pci_write_config_dword(dev, pos, mask);
+	pci_read_config_dword(dev, pos, &sz);
+	pci_write_config_dword(dev, pos, l);
+
+	/*
+	 * All bits set in sz means the device isn't working properly.
+	 * If the BAR isn't implemented, all bits must be 0.  If it's a
+	 * memory BAR or a ROM, bit 0 must be clear; if it's an io BAR, bit
+	 * 1 must be clear.
+	 */
+	if (!sz || sz == 0xffffffff)
+		goto fail;
+
+	/*
+	 * I don't know how l can have all bits set.  Copied from old code.
+	 * Maybe it fixes a bug on some ancient platform.
+	 */
+	if (l == 0xffffffff)
+		l = 0;
+
+	if (type == pci_bar_unknown) {
+		type = decode_bar(res, l);
+		res->flags |= pci_calc_resource_flags(l) | IORESOURCE_SIZEALIGN;
+		if (type == pci_bar_io) {
+			l &= PCI_BASE_ADDRESS_IO_MASK;
+			mask = PCI_BASE_ADDRESS_IO_MASK & 0xffff;
 		} else {
-			sz = pci_size(l, sz, PCI_BASE_ADDRESS_IO_MASK & 0xffff);
-			if (!sz)
-				continue;
-			res->start = l & PCI_BASE_ADDRESS_IO_MASK;
-			res->flags |= l & ~PCI_BASE_ADDRESS_IO_MASK;
+			l &= PCI_BASE_ADDRESS_MEM_MASK;
+			mask = (u32)PCI_BASE_ADDRESS_MEM_MASK;
 		}
-		res->end = res->start + (unsigned long) sz;
-		res->flags |= pci_calc_resource_flags(l) | IORESOURCE_SIZEALIGN;
-		if (is_64bit_memory(l)) {
-			u32 szhi, lhi;
-
-			pci_read_config_dword(dev, reg+4, &lhi);
-			pci_write_config_dword(dev, reg+4, ~0);
-			pci_read_config_dword(dev, reg+4, &szhi);
-			pci_write_config_dword(dev, reg+4, lhi);
-			sz64 = ((u64)szhi << 32) | raw_sz;
-			l64 = ((u64)lhi << 32) | l;
-			sz64 = pci_size64(l64, sz64, PCI_BASE_ADDRESS_MEM_MASK);
-			next++;
-#if BITS_PER_LONG == 64
-			if (!sz64) {
-				res->start = 0;
-				res->end = 0;
-				res->flags = 0;
-				continue;
-			}
-			res->start = l64 & PCI_BASE_ADDRESS_MEM_MASK;
-			res->end = res->start + sz64;
-#else
-			if (sz64 > 0x100000000ULL) {
-				dev_err(&dev->dev, "BAR %d: can't handle 64-bit"
-					" BAR\n", pos);
-				res->start = 0;
-				res->flags = 0;
-			} else if (lhi) {
-				/* 64-bit wide address, treat as disabled */
-				pci_write_config_dword(dev, reg,
-					l & ~(u32)PCI_BASE_ADDRESS_MEM_MASK);
-				pci_write_config_dword(dev, reg+4, 0);
-				res->start = 0;
-				res->end = sz;
-			}
-#endif
+	} else {
+		res->flags |= (l & IORESOURCE_ROM_ENABLE);
+		l &= PCI_ROM_ADDRESS_MASK;
+		mask = (u32)PCI_ROM_ADDRESS_MASK;
+	}
+
+	if (type == pci_bar_mem64) {
+		u64 l64 = l;
+		u64 sz64 = sz;
+		u64 mask64 = mask | (u64)~0 << 32;
+
+		pci_read_config_dword(dev, pos + 4, &l);
+		pci_write_config_dword(dev, pos + 4, ~0);
+		pci_read_config_dword(dev, pos + 4, &sz);
+		pci_write_config_dword(dev, pos + 4, l);
+
+		l64 |= ((u64)l << 32);
+		sz64 |= ((u64)sz << 32);
+
+		sz64 = pci_size(l64, sz64, mask64);
+
+		if (!sz64)
+			goto fail;
+
+		if ((sizeof(resource_size_t) < 8) && (sz64 > 0x100000000ULL)) {
+			dev_err(&dev->dev, "can't handle 64-bit BAR\n");
+			goto fail;
+		} else if ((sizeof(resource_size_t) < 8) && l) {
+			/* Address above 32-bit boundary; disable the BAR */
+			pci_write_config_dword(dev, pos, 0);
+			pci_write_config_dword(dev, pos + 4, 0);
+			res->start = 0;
+			res->end = sz64;
+		} else {
+			res->start = l64;
+			res->end = l64 + sz64;
 		}
+	} else {
+		sz = pci_size(l, sz, mask);
+
+		if (!sz)
+			goto fail;
+
+		res->start = l;
+		res->end = l + sz;
 	}
+
+ out:
+	return (type == pci_bar_mem64) ? 1 : 0;
+ fail:
+	res->flags = 0;
+	goto out;
+}
+
+static void pci_read_bases(struct pci_dev *dev, unsigned int howmany, int rom)
+{
+	unsigned int pos, reg;
+
+	for (pos = 0; pos < howmany; pos++) {
+		struct resource *res = &dev->resource[pos];
+		reg = PCI_BASE_ADDRESS_0 + (pos << 2);
+		pos += __pci_read_base(dev, pci_bar_unknown, res, reg);
+	}
+
 	if (rom) {
+		struct resource *res = &dev->resource[PCI_ROM_RESOURCE];
 		dev->rom_base_reg = rom;
-		res = &dev->resource[PCI_ROM_RESOURCE];
-		res->name = pci_name(dev);
-		pci_read_config_dword(dev, rom, &l);
-		pci_write_config_dword(dev, rom, ~PCI_ROM_ADDRESS_ENABLE);
-		pci_read_config_dword(dev, rom, &sz);
-		pci_write_config_dword(dev, rom, l);
-		if (l == 0xffffffff)
-			l = 0;
-		if (sz && sz != 0xffffffff) {
-			sz = pci_size(l, sz, (u32)PCI_ROM_ADDRESS_MASK);
-			if (sz) {
-				res->flags = (l & IORESOURCE_ROM_ENABLE) |
-				  IORESOURCE_MEM | IORESOURCE_PREFETCH |
-				  IORESOURCE_READONLY | IORESOURCE_CACHEABLE |
-				  IORESOURCE_SIZEALIGN;
-				res->start = l & PCI_ROM_ADDRESS_MASK;
-				res->end = res->start + (unsigned long) sz;
-			}
-		}
+		res->flags = IORESOURCE_MEM | IORESOURCE_PREFETCH |
+				IORESOURCE_READONLY | IORESOURCE_CACHEABLE |
+				IORESOURCE_SIZEALIGN;
+		__pci_read_base(dev, pci_bar_mem32, res, rom);
 	}
 }
 
@@ -357,6 +383,7 @@ void __devinit pci_read_bridge_bases(struct pci_bus *child)
 			res->start = base;
 		if (!res->end)
 			res->end = limit + 0xfff;
+		printk(KERN_INFO "PCI: bridge %s io port: [%llx, %llx]\n", pci_name(dev), res->start, res->end);
 	}
 
 	res = child->resource[1];
@@ -368,6 +395,7 @@ void __devinit pci_read_bridge_bases(struct pci_bus *child)
 		res->flags = (mem_base_lo & PCI_MEMORY_RANGE_TYPE_MASK) | IORESOURCE_MEM;
 		res->start = base;
 		res->end = limit + 0xfffff;
+		printk(KERN_INFO "PCI: bridge %s 32bit mmio: [%llx, %llx]\n", pci_name(dev), res->start, res->end);
 	}
 
 	res = child->resource[2];
@@ -403,6 +431,7 @@ void __devinit pci_read_bridge_bases(struct pci_bus *child)
 		res->flags = (mem_base_lo & PCI_MEMORY_RANGE_TYPE_MASK) | IORESOURCE_MEM | IORESOURCE_PREFETCH;
 		res->start = base;
 		res->end = limit + 0xfffff;
+		printk(KERN_INFO "PCI: bridge %s %sbit mmio pref: [%llx, %llx]\n", pci_name(dev), (res->flags & PCI_PREF_RANGE_TYPE_64)?"64":"32",res->start, res->end);
 	}
 }
 
@@ -1053,7 +1082,8 @@ int pci_scan_slot(struct pci_bus *bus, int devfn)
 		}
 	}
 
-	if (bus->self)
+	/* only one slot has pcie device */
+	if (bus->self && nr)
 		pcie_aspm_init_link_state(bus->self);
 
 	return nr;
diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c
index 12d489395fad..9236e7f869c8 100644
--- a/drivers/pci/quirks.c
+++ b/drivers/pci/quirks.c
@@ -923,6 +923,19 @@ static void __init quirk_ide_samemode(struct pci_dev *pdev)
 }
 DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801CA_10, quirk_ide_samemode);
 
+/*
+ * Some ATA devices break if put into D3
+ */
+
+static void __devinit quirk_no_ata_d3(struct pci_dev *pdev)
+{
+	/* Quirk the legacy ATA devices only. The AHCI ones are ok */
+	if ((pdev->class >> 8) == PCI_CLASS_STORAGE_IDE)
+		pdev->dev_flags |= PCI_DEV_FLAGS_NO_D3;
+}
+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_SERVERWORKS, PCI_ANY_ID, quirk_no_ata_d3);
+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_ATI, PCI_ANY_ID, quirk_no_ata_d3);
+
 /* This was originally an Alpha specific thing, but it really fits here.
  * The i82375 PCI/EISA bridge appears as non-classified. Fix that.
  */
@@ -1743,9 +1756,14 @@ DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_VIA, 0x324e, quirk_via_cx700_pci_parking_c
  */
 static void __devinit quirk_brcm_570x_limit_vpd(struct pci_dev *dev)
 {
-	/*  Only disable the VPD capability for 5706, 5708, and 5709 rev. A */
+	/*
+	 * Only disable the VPD capability for 5706, 5706S, 5708,
+	 * 5708S and 5709 rev. A
+	 */
 	if ((dev->device == PCI_DEVICE_ID_NX2_5706) ||
+	    (dev->device == PCI_DEVICE_ID_NX2_5706S) ||
 	    (dev->device == PCI_DEVICE_ID_NX2_5708) ||
+	    (dev->device == PCI_DEVICE_ID_NX2_5708S) ||
 	    ((dev->device == PCI_DEVICE_ID_NX2_5709) &&
 	     (dev->revision & 0xf0) == 0x0)) {
 		if (dev->vpd)
diff --git a/drivers/pci/search.c b/drivers/pci/search.c
index 217814fef4ef..3b3b5f178797 100644
--- a/drivers/pci/search.c
+++ b/drivers/pci/search.c
@@ -280,6 +280,8 @@ static struct pci_dev *pci_get_dev_by_id(const struct pci_device_id *id,
 			      match_pci_dev_by_id);
 	if (dev)
 		pdev = to_pci_dev(dev);
+	if (from)
+		pci_dev_put(from);
 	return pdev;
 }
 
diff --git a/drivers/pci/setup-bus.c b/drivers/pci/setup-bus.c
index 827c0a520e2b..1aad599816f7 100644
--- a/drivers/pci/setup-bus.c
+++ b/drivers/pci/setup-bus.c
@@ -352,11 +352,12 @@ static int pbus_size_mem(struct pci_bus *bus, unsigned long mask, unsigned long
 				continue;
 			r_size = r->end - r->start + 1;
 			/* For bridges size != alignment */
-			align = (i < PCI_BRIDGE_RESOURCES) ? r_size : r->start;
+			align = resource_alignment(r);
 			order = __ffs(align) - 20;
 			if (order > 11) {
-				dev_warn(&dev->dev, "BAR %d too large: "
+				dev_warn(&dev->dev, "BAR %d bad alignment %llx: "
 				       "%#016llx-%#016llx\n", i,
+				       (unsigned long long)align,
 				       (unsigned long long)r->start,
 				       (unsigned long long)r->end);
 				r->flags = 0;
@@ -530,6 +531,36 @@ void __ref pci_bus_assign_resources(struct pci_bus *bus)
 }
 EXPORT_SYMBOL(pci_bus_assign_resources);
 
+static void pci_bus_dump_res(struct pci_bus *bus)
+{
+        int i;
+
+        for (i = 0; i < PCI_BUS_NUM_RESOURCES; i++) {
+                struct resource *res = bus->resource[i];
+                if (!res)
+                        continue;
+
+		printk(KERN_INFO "bus: %02x index %x %s: [%llx, %llx]\n", bus->number, i, (res->flags & IORESOURCE_IO)? "io port":"mmio", res->start, res->end);
+        }
+}
+
+static void pci_bus_dump_resources(struct pci_bus *bus)
+{
+	struct pci_bus *b;
+	struct pci_dev *dev;
+
+
+	pci_bus_dump_res(bus);
+
+	list_for_each_entry(dev, &bus->devices, bus_list) {
+		b = dev->subordinate;
+		if (!b)
+			continue;
+
+		pci_bus_dump_resources(b);
+	}
+}
+
 void __init
 pci_assign_unassigned_resources(void)
 {
@@ -545,4 +576,9 @@ pci_assign_unassigned_resources(void)
 		pci_bus_assign_resources(bus);
 		pci_enable_bridges(bus);
 	}
+
+	/* dump the resource on buses */
+	list_for_each_entry(bus, &pci_root_buses, node) {
+		pci_bus_dump_resources(bus);
+	}
 }
diff --git a/drivers/pcmcia/at91_cf.c b/drivers/pcmcia/at91_cf.c
index 684968558c19..a0ffb8ebfe00 100644
--- a/drivers/pcmcia/at91_cf.c
+++ b/drivers/pcmcia/at91_cf.c
@@ -18,13 +18,13 @@
 
 #include <pcmcia/ss.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 #include <asm/sizes.h>
 #include <asm/gpio.h>
 
-#include <asm/arch/board.h>
-#include <asm/arch/at91rm9200_mc.h>
+#include <mach/board.h>
+#include <mach/at91rm9200_mc.h>
 
 
 /*
diff --git a/drivers/pcmcia/omap_cf.c b/drivers/pcmcia/omap_cf.c
index 569b746b5731..f3736398900e 100644
--- a/drivers/pcmcia/omap_cf.c
+++ b/drivers/pcmcia/omap_cf.c
@@ -19,12 +19,12 @@
 
 #include <pcmcia/ss.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 #include <asm/sizes.h>
 
-#include <asm/arch/mux.h>
-#include <asm/arch/tc.h>
+#include <mach/mux.h>
+#include <mach/tc.h>
 
 
 /* NOTE:  don't expect this to support many I/O cards.  The 16xx chips have
diff --git a/drivers/pcmcia/pxa2xx_base.c b/drivers/pcmcia/pxa2xx_base.c
index ccfdf1969a7f..1b07af5a2ed3 100644
--- a/drivers/pcmcia/pxa2xx_base.c
+++ b/drivers/pcmcia/pxa2xx_base.c
@@ -24,12 +24,12 @@
 #include <linux/spinlock.h>
 #include <linux/platform_device.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 #include <asm/irq.h>
 #include <asm/system.h>
-#include <asm/arch/pxa-regs.h>
-#include <asm/arch/pxa2xx-regs.h>
+#include <mach/pxa-regs.h>
+#include <mach/pxa2xx-regs.h>
 
 #include <pcmcia/cs_types.h>
 #include <pcmcia/ss.h>
diff --git a/drivers/pcmcia/pxa2xx_cm_x270.c b/drivers/pcmcia/pxa2xx_cm_x270.c
index bb95db7d2b76..bcff5cfed051 100644
--- a/drivers/pcmcia/pxa2xx_cm_x270.c
+++ b/drivers/pcmcia/pxa2xx_cm_x270.c
@@ -16,7 +16,7 @@
 #include <linux/gpio.h>
 
 #include <asm/mach-types.h>
-#include <asm/arch/pxa-regs.h>
+#include <mach/pxa-regs.h>
 
 #include "soc_common.h"
 
diff --git a/drivers/pcmcia/pxa2xx_lubbock.c b/drivers/pcmcia/pxa2xx_lubbock.c
index 881ec8a8e389..37ec55df086e 100644
--- a/drivers/pcmcia/pxa2xx_lubbock.c
+++ b/drivers/pcmcia/pxa2xx_lubbock.c
@@ -21,11 +21,11 @@
 #include <linux/init.h>
 #include <linux/delay.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/hardware/sa1111.h>
 #include <asm/mach-types.h>
-#include <asm/arch/pxa-regs.h>
-#include <asm/arch/lubbock.h>
+#include <mach/pxa-regs.h>
+#include <mach/lubbock.h>
 
 #include "sa1111_generic.h"
 
diff --git a/drivers/pcmcia/pxa2xx_mainstone.c b/drivers/pcmcia/pxa2xx_mainstone.c
index 92d1cc33808c..877001db4916 100644
--- a/drivers/pcmcia/pxa2xx_mainstone.c
+++ b/drivers/pcmcia/pxa2xx_mainstone.c
@@ -21,12 +21,12 @@
 
 #include <pcmcia/ss.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/irq.h>
 
-#include <asm/arch/pxa-regs.h>
-#include <asm/arch/mainstone.h>
+#include <mach/pxa-regs.h>
+#include <mach/mainstone.h>
 
 #include "soc_common.h"
 
diff --git a/drivers/pcmcia/pxa2xx_palmtx.c b/drivers/pcmcia/pxa2xx_palmtx.c
index 4abde190c1f5..e07b5c51ec5b 100644
--- a/drivers/pcmcia/pxa2xx_palmtx.c
+++ b/drivers/pcmcia/pxa2xx_palmtx.c
@@ -16,19 +16,64 @@
 
 #include <asm/mach-types.h>
 
-#include <asm/arch/gpio.h>
-#include <asm/arch/palmtx.h>
+#include <mach/gpio.h>
+#include <mach/palmtx.h>
 
 #include "soc_common.h"
 
 static int palmtx_pcmcia_hw_init(struct soc_pcmcia_socket *skt)
 {
-	skt->irq = IRQ_GPIO(GPIO_NR_PALMTX_PCMCIA_READY);
+	int ret;
+
+	ret = gpio_request(GPIO_NR_PALMTX_PCMCIA_POWER1, "PCMCIA PWR1");
+	if (ret)
+		goto err1;
+	ret = gpio_direction_output(GPIO_NR_PALMTX_PCMCIA_POWER1, 0);
+	if (ret)
+		goto err2;
+
+	ret = gpio_request(GPIO_NR_PALMTX_PCMCIA_POWER2, "PCMCIA PWR2");
+	if (ret)
+		goto err2;
+	ret = gpio_direction_output(GPIO_NR_PALMTX_PCMCIA_POWER2, 0);
+	if (ret)
+		goto err3;
+
+	ret = gpio_request(GPIO_NR_PALMTX_PCMCIA_RESET, "PCMCIA RST");
+	if (ret)
+		goto err3;
+	ret = gpio_direction_output(GPIO_NR_PALMTX_PCMCIA_RESET, 1);
+	if (ret)
+		goto err4;
+
+	ret = gpio_request(GPIO_NR_PALMTX_PCMCIA_READY, "PCMCIA RDY");
+	if (ret)
+		goto err4;
+	ret = gpio_direction_input(GPIO_NR_PALMTX_PCMCIA_READY);
+	if (ret)
+		goto err5;
+
+	skt->irq = gpio_to_irq(GPIO_NR_PALMTX_PCMCIA_READY);
 	return 0;
+
+err5:
+	gpio_free(GPIO_NR_PALMTX_PCMCIA_READY);
+err4:
+	gpio_free(GPIO_NR_PALMTX_PCMCIA_RESET);
+err3:
+	gpio_free(GPIO_NR_PALMTX_PCMCIA_POWER2);
+err2:
+	gpio_free(GPIO_NR_PALMTX_PCMCIA_POWER1);
+err1:
+	return ret;
 }
 
 static void palmtx_pcmcia_hw_shutdown(struct soc_pcmcia_socket *skt)
 {
+	gpio_free(GPIO_NR_PALMTX_PCMCIA_READY);
+	gpio_free(GPIO_NR_PALMTX_PCMCIA_RESET);
+	gpio_free(GPIO_NR_PALMTX_PCMCIA_POWER2);
+	gpio_free(GPIO_NR_PALMTX_PCMCIA_POWER1);
 }
 
 static void palmtx_pcmcia_socket_state(struct soc_pcmcia_socket *skt,
@@ -109,7 +154,7 @@ static void __exit palmtx_pcmcia_exit(void)
 	platform_device_unregister(palmtx_pcmcia_device);
 }
 
-fs_initcall(palmtx_pcmcia_init);
+module_init(palmtx_pcmcia_init);
 module_exit(palmtx_pcmcia_exit);
 
 MODULE_AUTHOR("Marek Vasut <marek.vasut@gmail.com>");
diff --git a/drivers/pcmcia/pxa2xx_sharpsl.c b/drivers/pcmcia/pxa2xx_sharpsl.c
index d71f93d45833..1cd02f5a23a0 100644
--- a/drivers/pcmcia/pxa2xx_sharpsl.c
+++ b/drivers/pcmcia/pxa2xx_sharpsl.c
@@ -19,7 +19,7 @@
 #include <linux/platform_device.h>
 
 #include <asm/mach-types.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/irq.h>
 #include <asm/hardware/scoop.h>
 
diff --git a/drivers/pcmcia/rsrc_nonstatic.c b/drivers/pcmcia/rsrc_nonstatic.c
index d0c1d63d1891..203e579ebbd2 100644
--- a/drivers/pcmcia/rsrc_nonstatic.c
+++ b/drivers/pcmcia/rsrc_nonstatic.c
@@ -275,7 +275,7 @@ static int readable(struct pcmcia_socket *s, struct resource *res,
 		destroy_cis_cache(s);
 	}
 	s->cis_mem.res = NULL;
-	if ((ret != 0) || (count == 0))
+	if ((ret != 0) || (*count == 0))
 		return 0;
 	return 1;
 }
diff --git a/drivers/pcmcia/sa1100_assabet.c b/drivers/pcmcia/sa1100_assabet.c
index ce133ce81c10..f424146a2bc9 100644
--- a/drivers/pcmcia/sa1100_assabet.c
+++ b/drivers/pcmcia/sa1100_assabet.c
@@ -11,11 +11,11 @@
 #include <linux/device.h>
 #include <linux/init.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/irq.h>
 #include <asm/signal.h>
-#include <asm/arch/assabet.h>
+#include <mach/assabet.h>
 
 #include "sa1100_generic.h"
 
diff --git a/drivers/pcmcia/sa1100_badge4.c b/drivers/pcmcia/sa1100_badge4.c
index 607c3f326eca..1ca9737ea79e 100644
--- a/drivers/pcmcia/sa1100_badge4.c
+++ b/drivers/pcmcia/sa1100_badge4.c
@@ -18,9 +18,9 @@
 #include <linux/errno.h>
 #include <linux/init.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/mach-types.h>
-#include <asm/arch/badge4.h>
+#include <mach/badge4.h>
 #include <asm/hardware/sa1111.h>
 
 #include "sa1111_generic.h"
diff --git a/drivers/pcmcia/sa1100_cerf.c b/drivers/pcmcia/sa1100_cerf.c
index 7c3951a2675d..63e6bc431a0d 100644
--- a/drivers/pcmcia/sa1100_cerf.c
+++ b/drivers/pcmcia/sa1100_cerf.c
@@ -11,10 +11,10 @@
 #include <linux/init.h>
 #include <linux/delay.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/irq.h>
-#include <asm/arch/cerf.h>
+#include <mach/cerf.h>
 #include "sa1100_generic.h"
 
 #define CERF_SOCKET	1
diff --git a/drivers/pcmcia/sa1100_h3600.c b/drivers/pcmcia/sa1100_h3600.c
index e5491879acd9..6de4e1b41d60 100644
--- a/drivers/pcmcia/sa1100_h3600.c
+++ b/drivers/pcmcia/sa1100_h3600.c
@@ -11,10 +11,10 @@
 #include <linux/init.h>
 #include <linux/delay.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/irq.h>
 #include <asm/mach-types.h>
-#include <asm/arch/h3600.h>
+#include <mach/h3600.h>
 
 #include "sa1100_generic.h"
 
diff --git a/drivers/pcmcia/sa1100_jornada720.c b/drivers/pcmcia/sa1100_jornada720.c
index 2167e6714d2d..57ca085473d5 100644
--- a/drivers/pcmcia/sa1100_jornada720.c
+++ b/drivers/pcmcia/sa1100_jornada720.c
@@ -10,7 +10,7 @@
 #include <linux/errno.h>
 #include <linux/init.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/hardware/sa1111.h>
 #include <asm/mach-types.h>
 
diff --git a/drivers/pcmcia/sa1100_neponset.c b/drivers/pcmcia/sa1100_neponset.c
index 687492fcd5b4..4c41e86ccff9 100644
--- a/drivers/pcmcia/sa1100_neponset.c
+++ b/drivers/pcmcia/sa1100_neponset.c
@@ -9,9 +9,9 @@
 #include <linux/errno.h>
 #include <linux/init.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/mach-types.h>
-#include <asm/arch/neponset.h>
+#include <mach/neponset.h>
 #include <asm/hardware/sa1111.h>
 
 #include "sa1111_generic.h"
diff --git a/drivers/pcmcia/sa1100_shannon.c b/drivers/pcmcia/sa1100_shannon.c
index 494912fccc0d..46d8c1977c2a 100644
--- a/drivers/pcmcia/sa1100_shannon.c
+++ b/drivers/pcmcia/sa1100_shannon.c
@@ -9,9 +9,9 @@
 #include <linux/device.h>
 #include <linux/init.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/mach-types.h>
-#include <asm/arch/shannon.h>
+#include <mach/shannon.h>
 #include <asm/irq.h>
 #include "sa1100_generic.h"
 
diff --git a/drivers/pcmcia/sa1100_simpad.c b/drivers/pcmcia/sa1100_simpad.c
index 42567de894b9..33a08ae09fdf 100644
--- a/drivers/pcmcia/sa1100_simpad.c
+++ b/drivers/pcmcia/sa1100_simpad.c
@@ -9,10 +9,10 @@
 #include <linux/device.h>
 #include <linux/init.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/irq.h>
-#include <asm/arch/simpad.h>
+#include <mach/simpad.h>
 #include "sa1100_generic.h"
  
 extern long get_cs3_shadow(void);
diff --git a/drivers/pcmcia/sa1111_generic.c b/drivers/pcmcia/sa1111_generic.c
index 658cddfbcf29..6924d0ea8d32 100644
--- a/drivers/pcmcia/sa1111_generic.c
+++ b/drivers/pcmcia/sa1111_generic.c
@@ -14,7 +14,7 @@
 
 #include <pcmcia/ss.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/hardware/sa1111.h>
 #include <asm/io.h>
 #include <asm/irq.h>
diff --git a/drivers/pcmcia/sa11xx_base.c b/drivers/pcmcia/sa11xx_base.c
index 31a7abc55b23..7cb1273202cc 100644
--- a/drivers/pcmcia/sa11xx_base.c
+++ b/drivers/pcmcia/sa11xx_base.c
@@ -37,7 +37,7 @@
 #include <linux/kernel.h>
 #include <linux/spinlock.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 #include <asm/irq.h>
 #include <asm/system.h>
diff --git a/drivers/pcmcia/soc_common.c b/drivers/pcmcia/soc_common.c
index 420a77540f41..c48f3f69bdaf 100644
--- a/drivers/pcmcia/soc_common.c
+++ b/drivers/pcmcia/soc_common.c
@@ -43,7 +43,7 @@
 #include <linux/spinlock.h>
 #include <linux/cpufreq.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 #include <asm/system.h>
 
@@ -51,7 +51,7 @@
 
 /* FIXME: platform dependent resource declaration has to move out of this file */
 #ifdef CONFIG_ARCH_PXA
-#include <asm/arch/pxa-regs.h>
+#include <mach/pxa-regs.h>
 #endif
 
 #ifdef DEBUG
@@ -149,10 +149,10 @@ soc_common_pcmcia_config_skt(struct soc_pcmcia_socket *skt, socket_state_t *stat
 		 */
 		if (skt->irq_state != 1 && state->io_irq) {
 			skt->irq_state = 1;
-			set_irq_type(skt->irq, IRQT_FALLING);
+			set_irq_type(skt->irq, IRQ_TYPE_EDGE_FALLING);
 		} else if (skt->irq_state == 1 && state->io_irq == 0) {
 			skt->irq_state = 0;
-			set_irq_type(skt->irq, IRQT_NOEDGE);
+			set_irq_type(skt->irq, IRQ_TYPE_NONE);
 		}
 
 		skt->cs_state = *state;
@@ -527,7 +527,7 @@ int soc_pcmcia_request_irqs(struct soc_pcmcia_socket *skt,
 				  IRQF_DISABLED, irqs[i].str, skt);
 		if (res)
 			break;
-		set_irq_type(irqs[i].irq, IRQT_NOEDGE);
+		set_irq_type(irqs[i].irq, IRQ_TYPE_NONE);
 	}
 
 	if (res) {
@@ -560,7 +560,7 @@ void soc_pcmcia_disable_irqs(struct soc_pcmcia_socket *skt,
 
 	for (i = 0; i < nr; i++)
 		if (irqs[i].sock == skt->nr)
-			set_irq_type(irqs[i].irq, IRQT_NOEDGE);
+			set_irq_type(irqs[i].irq, IRQ_TYPE_NONE);
 }
 EXPORT_SYMBOL(soc_pcmcia_disable_irqs);
 
@@ -571,8 +571,8 @@ void soc_pcmcia_enable_irqs(struct soc_pcmcia_socket *skt,
 
 	for (i = 0; i < nr; i++)
 		if (irqs[i].sock == skt->nr) {
-			set_irq_type(irqs[i].irq, IRQT_RISING);
-			set_irq_type(irqs[i].irq, IRQT_BOTHEDGE);
+			set_irq_type(irqs[i].irq, IRQ_TYPE_EDGE_RISING);
+			set_irq_type(irqs[i].irq, IRQ_TYPE_EDGE_BOTH);
 		}
 }
 EXPORT_SYMBOL(soc_pcmcia_enable_irqs);
diff --git a/drivers/pnp/base.h b/drivers/pnp/base.h
index e3fa9a2d9a3d..9fd7bb9b7dce 100644
--- a/drivers/pnp/base.h
+++ b/drivers/pnp/base.h
@@ -19,7 +19,6 @@ struct pnp_id *pnp_add_id(struct pnp_dev *dev, char *id);
 int pnp_interface_attach_device(struct pnp_dev *dev);
 
 int pnp_add_card(struct pnp_card *card);
-struct pnp_id *pnp_add_card_id(struct pnp_card *card, char *id);
 void pnp_remove_card(struct pnp_card *card);
 int pnp_add_card_device(struct pnp_card *card, struct pnp_dev *dev);
 void pnp_remove_card_device(struct pnp_dev *dev);
diff --git a/drivers/pnp/card.c b/drivers/pnp/card.c
index a762a4176736..e75b060daa95 100644
--- a/drivers/pnp/card.c
+++ b/drivers/pnp/card.c
@@ -8,6 +8,7 @@
 #include <linux/ctype.h>
 #include <linux/slab.h>
 #include <linux/pnp.h>
+#include <linux/dma-mapping.h>
 #include "base.h"
 
 LIST_HEAD(pnp_cards);
@@ -101,7 +102,7 @@ static int card_probe(struct pnp_card *card, struct pnp_card_driver *drv)
  * @id: pointer to a pnp_id structure
  * @card: pointer to the desired card
  */
-struct pnp_id *pnp_add_card_id(struct pnp_card *card, char *id)
+static struct pnp_id *pnp_add_card_id(struct pnp_card *card, char *id)
 {
 	struct pnp_id *dev_id, *ptr;
 
@@ -167,6 +168,9 @@ struct pnp_card *pnp_alloc_card(struct pnp_protocol *protocol, int id, char *pnp
 	sprintf(card->dev.bus_id, "%02x:%02x", card->protocol->number,
 		card->number);
 
+	card->dev.coherent_dma_mask = DMA_24BIT_MASK;
+	card->dev.dma_mask = &card->dev.coherent_dma_mask;
+
 	dev_id = pnp_add_card_id(card, pnpid);
 	if (!dev_id) {
 		kfree(card);
diff --git a/drivers/pnp/quirks.c b/drivers/pnp/quirks.c
index 55f55ed72dc7..0bdf9b8a5e58 100644
--- a/drivers/pnp/quirks.c
+++ b/drivers/pnp/quirks.c
@@ -245,15 +245,17 @@ static void quirk_system_pci_resources(struct pnp_dev *dev)
 	 */
 	for_each_pci_dev(pdev) {
 		for (i = 0; i < DEVICE_COUNT_RESOURCE; i++) {
-			if (!(pci_resource_flags(pdev, i) & IORESOURCE_MEM) ||
-			    pci_resource_len(pdev, i) == 0)
+			unsigned int type;
+
+			type = pci_resource_flags(pdev, i) &
+					(IORESOURCE_IO | IORESOURCE_MEM);
+			if (!type || pci_resource_len(pdev, i) == 0)
 				continue;
 
 			pci_start = pci_resource_start(pdev, i);
 			pci_end = pci_resource_end(pdev, i);
 			for (j = 0;
-			     (res = pnp_get_resource(dev, IORESOURCE_MEM, j));
-			     j++) {
+			     (res = pnp_get_resource(dev, type, j)); j++) {
 				if (res->start == 0 && res->end == 0)
 					continue;
 
@@ -283,9 +285,10 @@ static void quirk_system_pci_resources(struct pnp_dev *dev)
 				 * the PCI region, and that might prevent a PCI
 				 * driver from requesting its resources.
 				 */
-				dev_warn(&dev->dev, "mem resource "
+				dev_warn(&dev->dev, "%s resource "
 					"(0x%llx-0x%llx) overlaps %s BAR %d "
 					"(0x%llx-0x%llx), disabling\n",
+					pnp_resource_type_name(res),
 					(unsigned long long) pnp_start,
 					(unsigned long long) pnp_end,
 					pci_name(pdev), i,
diff --git a/drivers/pnp/support.c b/drivers/pnp/support.c
index bbf78ef4ba02..b42df1620718 100644
--- a/drivers/pnp/support.c
+++ b/drivers/pnp/support.c
@@ -77,7 +77,7 @@ void dbg_pnp_show_resources(struct pnp_dev *dev, char *desc)
 {
 #ifdef DEBUG
 	char buf[128];
-	int len = 0;
+	int len;
 	struct pnp_resource *pnp_res;
 	struct resource *res;
 
@@ -89,9 +89,10 @@ void dbg_pnp_show_resources(struct pnp_dev *dev, char *desc)
 	dev_dbg(&dev->dev, "%s: current resources:\n", desc);
 	list_for_each_entry(pnp_res, &dev->resources, list) {
 		res = &pnp_res->res;
+		len = 0;
 
-		len += snprintf(buf + len, sizeof(buf) - len, "  %-3s ",
-				pnp_resource_type_name(res));
+		len += scnprintf(buf + len, sizeof(buf) - len, "  %-3s ",
+				 pnp_resource_type_name(res));
 
 		if (res->flags & IORESOURCE_DISABLED) {
 			dev_dbg(&dev->dev, "%sdisabled\n", buf);
@@ -101,18 +102,18 @@ void dbg_pnp_show_resources(struct pnp_dev *dev, char *desc)
 		switch (pnp_resource_type(res)) {
 		case IORESOURCE_IO:
 		case IORESOURCE_MEM:
-			len += snprintf(buf + len, sizeof(buf) - len,
-					"%#llx-%#llx flags %#lx",
-					(unsigned long long) res->start,
-					(unsigned long long) res->end,
-					res->flags);
+			len += scnprintf(buf + len, sizeof(buf) - len,
+					 "%#llx-%#llx flags %#lx",
+					 (unsigned long long) res->start,
+					 (unsigned long long) res->end,
+					 res->flags);
 			break;
 		case IORESOURCE_IRQ:
 		case IORESOURCE_DMA:
-			len += snprintf(buf + len, sizeof(buf) - len,
-					"%lld flags %#lx",
-					(unsigned long long) res->start,
-					res->flags);
+			len += scnprintf(buf + len, sizeof(buf) - len,
+					 "%lld flags %#lx",
+					 (unsigned long long) res->start,
+					 res->flags);
 			break;
 		}
 		dev_dbg(&dev->dev, "%s\n", buf);
@@ -144,66 +145,67 @@ void dbg_pnp_show_option(struct pnp_dev *dev, struct pnp_option *option)
 	struct pnp_dma *dma;
 
 	if (pnp_option_is_dependent(option))
-		len += snprintf(buf + len, sizeof(buf) - len,
-				"  dependent set %d (%s) ",
-				pnp_option_set(option),
-				pnp_option_priority_name(option));
+		len += scnprintf(buf + len, sizeof(buf) - len,
+				 "  dependent set %d (%s) ",
+				 pnp_option_set(option),
+				 pnp_option_priority_name(option));
 	else
-		len += snprintf(buf + len, sizeof(buf) - len, "  independent ");
+		len += scnprintf(buf + len, sizeof(buf) - len,
+				 "  independent ");
 
 	switch (option->type) {
 	case IORESOURCE_IO:
 		port = &option->u.port;
-		len += snprintf(buf + len, sizeof(buf) - len, "io  min %#llx "
-				"max %#llx align %lld size %lld flags %#x",
-				(unsigned long long) port->min,
-				(unsigned long long) port->max,
-				(unsigned long long) port->align,
-				(unsigned long long) port->size, port->flags);
+		len += scnprintf(buf + len, sizeof(buf) - len, "io  min %#llx "
+				 "max %#llx align %lld size %lld flags %#x",
+				 (unsigned long long) port->min,
+				 (unsigned long long) port->max,
+				 (unsigned long long) port->align,
+				 (unsigned long long) port->size, port->flags);
 		break;
 	case IORESOURCE_MEM:
 		mem = &option->u.mem;
-		len += snprintf(buf + len, sizeof(buf) - len, "mem min %#llx "
-				"max %#llx align %lld size %lld flags %#x",
-				(unsigned long long) mem->min,
-				(unsigned long long) mem->max,
-				(unsigned long long) mem->align,
-				(unsigned long long) mem->size, mem->flags);
+		len += scnprintf(buf + len, sizeof(buf) - len, "mem min %#llx "
+				 "max %#llx align %lld size %lld flags %#x",
+				 (unsigned long long) mem->min,
+				 (unsigned long long) mem->max,
+				 (unsigned long long) mem->align,
+				 (unsigned long long) mem->size, mem->flags);
 		break;
 	case IORESOURCE_IRQ:
 		irq = &option->u.irq;
-		len += snprintf(buf + len, sizeof(buf) - len, "irq");
+		len += scnprintf(buf + len, sizeof(buf) - len, "irq");
 		if (bitmap_empty(irq->map.bits, PNP_IRQ_NR))
-			len += snprintf(buf + len, sizeof(buf) - len,
-					" <none>");
+			len += scnprintf(buf + len, sizeof(buf) - len,
+					 " <none>");
 		else {
 			for (i = 0; i < PNP_IRQ_NR; i++)
 				if (test_bit(i, irq->map.bits))
-					len += snprintf(buf + len,
-							sizeof(buf) - len,
-							" %d", i);
+					len += scnprintf(buf + len,
+							 sizeof(buf) - len,
+							 " %d", i);
 		}
-		len += snprintf(buf + len, sizeof(buf) - len, " flags %#x",
-				irq->flags);
+		len += scnprintf(buf + len, sizeof(buf) - len, " flags %#x",
+				 irq->flags);
 		if (irq->flags & IORESOURCE_IRQ_OPTIONAL)
-			len += snprintf(buf + len, sizeof(buf) - len,
-					" (optional)");
+			len += scnprintf(buf + len, sizeof(buf) - len,
+					 " (optional)");
 		break;
 	case IORESOURCE_DMA:
 		dma = &option->u.dma;
-		len += snprintf(buf + len, sizeof(buf) - len, "dma");
+		len += scnprintf(buf + len, sizeof(buf) - len, "dma");
 		if (!dma->map)
-			len += snprintf(buf + len, sizeof(buf) - len,
-					" <none>");
+			len += scnprintf(buf + len, sizeof(buf) - len,
+					 " <none>");
 		else {
 			for (i = 0; i < 8; i++)
 				if (dma->map & (1 << i))
-					len += snprintf(buf + len,
-							sizeof(buf) - len,
-							" %d", i);
+					len += scnprintf(buf + len,
+							 sizeof(buf) - len,
+							 " %d", i);
 		}
-		len += snprintf(buf + len, sizeof(buf) - len, " (bitmask %#x) "
-				"flags %#x", dma->map, dma->flags);
+		len += scnprintf(buf + len, sizeof(buf) - len, " (bitmask %#x) "
+				 "flags %#x", dma->map, dma->flags);
 		break;
 	}
 	dev_dbg(&dev->dev, "%s\n", buf);
diff --git a/drivers/power/Kconfig b/drivers/power/Kconfig
index 4d17d384578d..9ce55850271a 100644
--- a/drivers/power/Kconfig
+++ b/drivers/power/Kconfig
@@ -49,6 +49,13 @@ config BATTERY_OLPC
 	help
 	  Say Y to enable support for the battery on the OLPC laptop.
 
+config BATTERY_TOSA
+	tristate "Sharp SL-6000 (tosa) battery"
+	depends on MACH_TOSA && MFD_TC6393XB
+	help
+	  Say Y to enable support for the battery on the Sharp Zaurus
+	  SL-6000 (tosa) models.
+
 config BATTERY_PALMTX
 	tristate "Palm T|X battery"
 	depends on MACH_PALMTX
diff --git a/drivers/power/Makefile b/drivers/power/Makefile
index 6f43a54ee420..4706bf8ff459 100644
--- a/drivers/power/Makefile
+++ b/drivers/power/Makefile
@@ -20,4 +20,5 @@ obj-$(CONFIG_APM_POWER)		+= apm_power.o
 obj-$(CONFIG_BATTERY_DS2760)	+= ds2760_battery.o
 obj-$(CONFIG_BATTERY_PMU)	+= pmu_battery.o
 obj-$(CONFIG_BATTERY_OLPC)	+= olpc_battery.o
+obj-$(CONFIG_BATTERY_TOSA)	+= tosa_battery.o
 obj-$(CONFIG_BATTERY_PALMTX)	+= palmtx_battery.o
diff --git a/drivers/power/ds2760_battery.c b/drivers/power/ds2760_battery.c
index 71be36f18709..308ddb201b66 100644
--- a/drivers/power/ds2760_battery.c
+++ b/drivers/power/ds2760_battery.c
@@ -433,6 +433,8 @@ static int ds2760_battery_resume(struct platform_device *pdev)
 
 #endif /* CONFIG_PM */
 
+MODULE_ALIAS("platform:ds2760-battery");
+
 static struct platform_driver ds2760_battery_driver = {
 	.driver = {
 		.name = "ds2760-battery",
diff --git a/drivers/power/olpc_battery.c b/drivers/power/olpc_battery.c
index ab1e8289f07f..32570af3c5c9 100644
--- a/drivers/power/olpc_battery.c
+++ b/drivers/power/olpc_battery.c
@@ -19,7 +19,7 @@
 
 #define EC_BAT_VOLTAGE	0x10	/* uint16_t,	*9.76/32,    mV   */
 #define EC_BAT_CURRENT	0x11	/* int16_t,	*15.625/120, mA   */
-#define EC_BAT_ACR	0x12
+#define EC_BAT_ACR	0x12	/* int16_t,	*6250/15,    µAh  */
 #define EC_BAT_TEMP	0x13	/* uint16_t,	*100/256,   °C  */
 #define EC_AMB_TEMP	0x14	/* uint16_t,	*100/256,   °C  */
 #define EC_BAT_STATUS	0x15	/* uint8_t,	bitmask */
@@ -84,6 +84,119 @@ static struct power_supply olpc_ac = {
 	.get_property = olpc_ac_get_prop,
 };
 
+static char bat_serial[17]; /* Ick */
+
+static int olpc_bat_get_status(union power_supply_propval *val, uint8_t ec_byte)
+{
+	if (olpc_platform_info.ecver > 0x44) {
+		if (ec_byte & BAT_STAT_CHARGING)
+			val->intval = POWER_SUPPLY_STATUS_CHARGING;
+		else if (ec_byte & BAT_STAT_DISCHARGING)
+			val->intval = POWER_SUPPLY_STATUS_DISCHARGING;
+		else if (ec_byte & BAT_STAT_FULL)
+			val->intval = POWER_SUPPLY_STATUS_FULL;
+		else /* er,... */
+			val->intval = POWER_SUPPLY_STATUS_NOT_CHARGING;
+	} else {
+		/* Older EC didn't report charge/discharge bits */
+		if (!(ec_byte & BAT_STAT_AC)) /* No AC means discharging */
+			val->intval = POWER_SUPPLY_STATUS_DISCHARGING;
+		else if (ec_byte & BAT_STAT_FULL)
+			val->intval = POWER_SUPPLY_STATUS_FULL;
+		else /* Not _necessarily_ true but EC doesn't tell all yet */
+			val->intval = POWER_SUPPLY_STATUS_CHARGING;
+	}
+
+	return 0;
+}
+
+static int olpc_bat_get_health(union power_supply_propval *val)
+{
+	uint8_t ec_byte;
+	int ret;
+
+	ret = olpc_ec_cmd(EC_BAT_ERRCODE, NULL, 0, &ec_byte, 1);
+	if (ret)
+		return ret;
+
+	switch (ec_byte) {
+	case 0:
+		val->intval = POWER_SUPPLY_HEALTH_GOOD;
+		break;
+
+	case BAT_ERR_OVERTEMP:
+		val->intval = POWER_SUPPLY_HEALTH_OVERHEAT;
+		break;
+
+	case BAT_ERR_OVERVOLTAGE:
+		val->intval = POWER_SUPPLY_HEALTH_OVERVOLTAGE;
+		break;
+
+	case BAT_ERR_INFOFAIL:
+	case BAT_ERR_OUT_OF_CONTROL:
+	case BAT_ERR_ID_FAIL:
+	case BAT_ERR_ACR_FAIL:
+		val->intval = POWER_SUPPLY_HEALTH_UNSPEC_FAILURE;
+		break;
+
+	default:
+		/* Eep. We don't know this failure code */
+		ret = -EIO;
+	}
+
+	return ret;
+}
+
+static int olpc_bat_get_mfr(union power_supply_propval *val)
+{
+	uint8_t ec_byte;
+	int ret;
+
+	ec_byte = BAT_ADDR_MFR_TYPE;
+	ret = olpc_ec_cmd(EC_BAT_EEPROM, &ec_byte, 1, &ec_byte, 1);
+	if (ret)
+		return ret;
+
+	switch (ec_byte >> 4) {
+	case 1:
+		val->strval = "Gold Peak";
+		break;
+	case 2:
+		val->strval = "BYD";
+		break;
+	default:
+		val->strval = "Unknown";
+		break;
+	}
+
+	return ret;
+}
+
+static int olpc_bat_get_tech(union power_supply_propval *val)
+{
+	uint8_t ec_byte;
+	int ret;
+
+	ec_byte = BAT_ADDR_MFR_TYPE;
+	ret = olpc_ec_cmd(EC_BAT_EEPROM, &ec_byte, 1, &ec_byte, 1);
+	if (ret)
+		return ret;
+
+	switch (ec_byte & 0xf) {
+	case 1:
+		val->intval = POWER_SUPPLY_TECHNOLOGY_NiMH;
+		break;
+	case 2:
+		val->intval = POWER_SUPPLY_TECHNOLOGY_LiFe;
+		break;
+	default:
+		val->intval = POWER_SUPPLY_TECHNOLOGY_UNKNOWN;
+		break;
+	}
+
+	return ret;
+}
+
 /*********************************************************************
  *		Battery properties
  *********************************************************************/
@@ -94,6 +207,7 @@ static int olpc_bat_get_property(struct power_supply *psy,
 	int ret = 0;
 	int16_t ec_word;
 	uint8_t ec_byte;
+	uint64_t ser_buf;
 
 	ret = olpc_ec_cmd(EC_BAT_STATUS, NULL, 0, &ec_byte, 1);
 	if (ret)
@@ -110,25 +224,10 @@ static int olpc_bat_get_property(struct power_supply *psy,
 
 	switch (psp) {
 	case POWER_SUPPLY_PROP_STATUS:
-		if (olpc_platform_info.ecver > 0x44) {
-			if (ec_byte & BAT_STAT_CHARGING)
-				val->intval = POWER_SUPPLY_STATUS_CHARGING;
-			else if (ec_byte & BAT_STAT_DISCHARGING)
-				val->intval = POWER_SUPPLY_STATUS_DISCHARGING;
-			else if (ec_byte & BAT_STAT_FULL)
-				val->intval = POWER_SUPPLY_STATUS_FULL;
-			else /* er,... */
-				val->intval = POWER_SUPPLY_STATUS_NOT_CHARGING;
-		} else {
-			/* Older EC didn't report charge/discharge bits */
-			if (!(ec_byte & BAT_STAT_AC)) /* No AC means discharging */
-				val->intval = POWER_SUPPLY_STATUS_DISCHARGING;
-			else if (ec_byte & BAT_STAT_FULL)
-				val->intval = POWER_SUPPLY_STATUS_FULL;
-			else /* Not _necessarily_ true but EC doesn't tell all yet */
-				val->intval = POWER_SUPPLY_STATUS_CHARGING;
-			break;
-		}
+		ret = olpc_bat_get_status(val, ec_byte);
+		if (ret)
+			return ret;
+		break;
 	case POWER_SUPPLY_PROP_PRESENT:
 		val->intval = !!(ec_byte & BAT_STAT_PRESENT);
 		break;
@@ -137,72 +236,21 @@ static int olpc_bat_get_property(struct power_supply *psy,
 		if (ec_byte & BAT_STAT_DESTROY)
 			val->intval = POWER_SUPPLY_HEALTH_DEAD;
 		else {
-			ret = olpc_ec_cmd(EC_BAT_ERRCODE, NULL, 0, &ec_byte, 1);
+			ret = olpc_bat_get_health(val);
 			if (ret)
 				return ret;
-
-			switch (ec_byte) {
-			case 0:
-				val->intval = POWER_SUPPLY_HEALTH_GOOD;
-				break;
-
-			case BAT_ERR_OVERTEMP:
-				val->intval = POWER_SUPPLY_HEALTH_OVERHEAT;
-				break;
-
-			case BAT_ERR_OVERVOLTAGE:
-				val->intval = POWER_SUPPLY_HEALTH_OVERVOLTAGE;
-				break;
-
-			case BAT_ERR_INFOFAIL:
-			case BAT_ERR_OUT_OF_CONTROL:
-			case BAT_ERR_ID_FAIL:
-			case BAT_ERR_ACR_FAIL:
-				val->intval = POWER_SUPPLY_HEALTH_UNSPEC_FAILURE;
-				break;
-
-			default:
-				/* Eep. We don't know this failure code */
-				return -EIO;
-			}
 		}
 		break;
 
 	case POWER_SUPPLY_PROP_MANUFACTURER:
-		ec_byte = BAT_ADDR_MFR_TYPE;
-		ret = olpc_ec_cmd(EC_BAT_EEPROM, &ec_byte, 1, &ec_byte, 1);
+		ret = olpc_bat_get_mfr(val);
 		if (ret)
 			return ret;
-
-		switch (ec_byte >> 4) {
-		case 1:
-			val->strval = "Gold Peak";
-			break;
-		case 2:
-			val->strval = "BYD";
-			break;
-		default:
-			val->strval = "Unknown";
-			break;
-		}
 		break;
 	case POWER_SUPPLY_PROP_TECHNOLOGY:
-		ec_byte = BAT_ADDR_MFR_TYPE;
-		ret = olpc_ec_cmd(EC_BAT_EEPROM, &ec_byte, 1, &ec_byte, 1);
+		ret = olpc_bat_get_tech(val);
 		if (ret)
 			return ret;
-
-		switch (ec_byte & 0xf) {
-		case 1:
-			val->intval = POWER_SUPPLY_TECHNOLOGY_NiMH;
-			break;
-		case 2:
-			val->intval = POWER_SUPPLY_TECHNOLOGY_LiFe;
-			break;
-		default:
-			val->intval = POWER_SUPPLY_TECHNOLOGY_UNKNOWN;
-			break;
-		}
 		break;
 	case POWER_SUPPLY_PROP_VOLTAGE_AVG:
 		ret = olpc_ec_cmd(EC_BAT_VOLTAGE, NULL, 0, (void *)&ec_word, 2);
@@ -241,6 +289,22 @@ static int olpc_bat_get_property(struct power_supply *psy,
 		ec_word = be16_to_cpu(ec_word);
 		val->intval = ec_word * 100 / 256;
 		break;
+	case POWER_SUPPLY_PROP_CHARGE_COUNTER:
+		ret = olpc_ec_cmd(EC_BAT_ACR, NULL, 0, (void *)&ec_word, 2);
+		if (ret)
+			return ret;
+
+		ec_word = be16_to_cpu(ec_word);
+		val->intval = ec_word * 6250 / 15;
+		break;
+	case POWER_SUPPLY_PROP_SERIAL_NUMBER:
+		ret = olpc_ec_cmd(EC_BAT_SERIAL, NULL, 0, (void *)&ser_buf, 8);
+		if (ret)
+			return ret;
+
+		sprintf(bat_serial, "%016llx", (long long)be64_to_cpu(ser_buf));
+		val->strval = bat_serial;
+		break;
 	default:
 		ret = -EINVAL;
 		break;
@@ -260,6 +324,50 @@ static enum power_supply_property olpc_bat_props[] = {
 	POWER_SUPPLY_PROP_TEMP,
 	POWER_SUPPLY_PROP_TEMP_AMBIENT,
 	POWER_SUPPLY_PROP_MANUFACTURER,
+	POWER_SUPPLY_PROP_SERIAL_NUMBER,
+	POWER_SUPPLY_PROP_CHARGE_COUNTER,
+};
+
+/* EEPROM reading goes completely around the power_supply API, sadly */
+
+#define EEPROM_START	0x20
+#define EEPROM_END	0x80
+#define EEPROM_SIZE	(EEPROM_END - EEPROM_START)
+
+static ssize_t olpc_bat_eeprom_read(struct kobject *kobj,
+		struct bin_attribute *attr, char *buf, loff_t off, size_t count)
+{
+	uint8_t ec_byte;
+	int ret, end;
+
+	if (off >= EEPROM_SIZE)
+		return 0;
+	if (off + count > EEPROM_SIZE)
+		count = EEPROM_SIZE - off;
+
+	end = EEPROM_START + off + count;
+	for (ec_byte = EEPROM_START + off; ec_byte < end; ec_byte++) {
+		ret = olpc_ec_cmd(EC_BAT_EEPROM, &ec_byte, 1,
+				&buf[ec_byte - EEPROM_START], 1);
+		if (ret) {
+			printk(KERN_ERR "olpc-battery:  EC command "
+					"EC_BAT_EEPROM @ 0x%x failed -"
+					" %d!\n", ec_byte, ret);
+			return -EIO;
+		}
+	}
+
+	return count;
+}
+
+static struct bin_attribute olpc_bat_eeprom = {
+	.attr = {
+		.name = "eeprom",
+		.mode = S_IRUGO,
+		.owner = THIS_MODULE,
+	},
+	.size = 0,
+	.read = olpc_bat_eeprom_read,
 };
 
 /*********************************************************************
@@ -290,8 +398,14 @@ static int __init olpc_bat_init(void)
 
 	if (!olpc_platform_info.ecver)
 		return -ENXIO;
-	if (olpc_platform_info.ecver < 0x43) {
-		printk(KERN_NOTICE "OLPC EC version 0x%02x too old for battery driver.\n", olpc_platform_info.ecver);
+
+	/*
+	 * We've seen a number of EC protocol changes; this driver requires
+	 * the latest EC protocol, supported by 0x44 and above.
+	 */
+	if (olpc_platform_info.ecver < 0x44) {
+		printk(KERN_NOTICE "OLPC EC version 0x%02x too old for "
+			"battery driver.\n", olpc_platform_info.ecver);
 		return -ENXIO;
 	}
 
@@ -315,8 +429,14 @@ static int __init olpc_bat_init(void)
 	if (ret)
 		goto battery_failed;
 
+	ret = device_create_bin_file(olpc_bat.dev, &olpc_bat_eeprom);
+	if (ret)
+		goto eeprom_failed;
+
 	goto success;
 
+eeprom_failed:
+	power_supply_unregister(&olpc_bat);
 battery_failed:
 	power_supply_unregister(&olpc_ac);
 ac_failed:
@@ -327,6 +447,7 @@ success:
 
 static void __exit olpc_bat_exit(void)
 {
+	device_remove_bin_file(olpc_bat.dev, &olpc_bat_eeprom);
 	power_supply_unregister(&olpc_bat);
 	power_supply_unregister(&olpc_ac);
 	platform_device_unregister(bat_pdev);
diff --git a/drivers/power/palmtx_battery.c b/drivers/power/palmtx_battery.c
index 244bb273a637..7035bfa41c62 100644
--- a/drivers/power/palmtx_battery.c
+++ b/drivers/power/palmtx_battery.c
@@ -22,7 +22,7 @@
 #include <linux/gpio.h>
 
 #include <asm/mach-types.h>
-#include <asm/arch/palmtx.h>
+#include <mach/palmtx.h>
 
 static DEFINE_MUTEX(bat_lock);
 static struct work_struct bat_work;
diff --git a/drivers/power/pda_power.c b/drivers/power/pda_power.c
index 82810b7bff9c..0471ec743ab9 100644
--- a/drivers/power/pda_power.c
+++ b/drivers/power/pda_power.c
@@ -362,6 +362,8 @@ static int pda_power_resume(struct platform_device *pdev)
 #define pda_power_resume NULL
 #endif /* CONFIG_PM */
 
+MODULE_ALIAS("platform:pda-power");
+
 static struct platform_driver pda_power_pdrv = {
 	.driver = {
 		.name = "pda-power",
diff --git a/drivers/power/power_supply_sysfs.c b/drivers/power/power_supply_sysfs.c
index 49215da5249b..fe2aeb11939b 100644
--- a/drivers/power/power_supply_sysfs.c
+++ b/drivers/power/power_supply_sysfs.c
@@ -99,6 +99,7 @@ static struct device_attribute power_supply_attrs[] = {
 	POWER_SUPPLY_ATTR(charge_empty),
 	POWER_SUPPLY_ATTR(charge_now),
 	POWER_SUPPLY_ATTR(charge_avg),
+	POWER_SUPPLY_ATTR(charge_counter),
 	POWER_SUPPLY_ATTR(energy_full_design),
 	POWER_SUPPLY_ATTR(energy_empty_design),
 	POWER_SUPPLY_ATTR(energy_full),
diff --git a/drivers/power/tosa_battery.c b/drivers/power/tosa_battery.c
new file mode 100644
index 000000000000..2eab35aab311
--- /dev/null
+++ b/drivers/power/tosa_battery.c
@@ -0,0 +1,486 @@
+/*
+ * Battery and Power Management code for the Sharp SL-6000x
+ *
+ * Copyright (c) 2005 Dirk Opfer
+ * Copyright (c) 2008 Dmitry Baryshkov
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/power_supply.h>
+#include <linux/wm97xx.h>
+#include <linux/delay.h>
+#include <linux/spinlock.h>
+#include <linux/interrupt.h>
+#include <linux/gpio.h>
+
+#include <asm/mach-types.h>
+#include <mach/tosa.h>
+
+static DEFINE_MUTEX(bat_lock); /* protects gpio pins */
+static struct work_struct bat_work;
+
+struct tosa_bat {
+	int status;
+	struct power_supply psy;
+	int full_chrg;
+
+	struct mutex work_lock; /* protects data */
+
+	bool (*is_present)(struct tosa_bat *bat);
+	int gpio_full;
+	int gpio_charge_off;
+
+	int technology;
+
+	int gpio_bat;
+	int adc_bat;
+	int adc_bat_divider;
+	int bat_max;
+	int bat_min;
+
+	int gpio_temp;
+	int adc_temp;
+	int adc_temp_divider;
+};
+
+static struct tosa_bat tosa_bat_main;
+static struct tosa_bat tosa_bat_jacket;
+
+static unsigned long tosa_read_bat(struct tosa_bat *bat)
+{
+	unsigned long value = 0;
+
+	if (bat->gpio_bat < 0 || bat->adc_bat < 0)
+		return 0;
+
+	mutex_lock(&bat_lock);
+	gpio_set_value(bat->gpio_bat, 1);
+	msleep(5);
+	value = wm97xx_read_aux_adc(bat->psy.dev->parent->driver_data,
+			bat->adc_bat);
+	gpio_set_value(bat->gpio_bat, 0);
+	mutex_unlock(&bat_lock);
+
+	value = value * 1000000 / bat->adc_bat_divider;
+
+	return value;
+}
+
+static unsigned long tosa_read_temp(struct tosa_bat *bat)
+{
+	unsigned long value = 0;
+
+	if (bat->gpio_temp < 0 || bat->adc_temp < 0)
+		return 0;
+
+	mutex_lock(&bat_lock);
+	gpio_set_value(bat->gpio_temp, 1);
+	msleep(5);
+	value = wm97xx_read_aux_adc(bat->psy.dev->parent->driver_data,
+			bat->adc_temp);
+	gpio_set_value(bat->gpio_temp, 0);
+	mutex_unlock(&bat_lock);
+
+	value = value * 10000 / bat->adc_temp_divider;
+
+	return value;
+}
+
+static int tosa_bat_get_property(struct power_supply *psy,
+			    enum power_supply_property psp,
+			    union power_supply_propval *val)
+{
+	int ret = 0;
+	struct tosa_bat *bat = container_of(psy, struct tosa_bat, psy);
+
+	if (bat->is_present && !bat->is_present(bat)
+			&& psp != POWER_SUPPLY_PROP_PRESENT) {
+		return -ENODEV;
+	}
+
+	switch (psp) {
+	case POWER_SUPPLY_PROP_STATUS:
+		val->intval = bat->status;
+		break;
+	case POWER_SUPPLY_PROP_TECHNOLOGY:
+		val->intval = bat->technology;
+		break;
+	case POWER_SUPPLY_PROP_VOLTAGE_NOW:
+		val->intval = tosa_read_bat(bat);
+		break;
+	case POWER_SUPPLY_PROP_VOLTAGE_MAX:
+		if (bat->full_chrg == -1)
+			val->intval = bat->bat_max;
+		else
+			val->intval = bat->full_chrg;
+		break;
+	case POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN:
+		val->intval = bat->bat_max;
+		break;
+	case POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN:
+		val->intval = bat->bat_min;
+		break;
+	case POWER_SUPPLY_PROP_TEMP:
+		val->intval = tosa_read_temp(bat);
+		break;
+	case POWER_SUPPLY_PROP_PRESENT:
+		val->intval = bat->is_present ? bat->is_present(bat) : 1;
+		break;
+	default:
+		ret = -EINVAL;
+		break;
+	}
+	return ret;
+}
+
+static bool tosa_jacket_bat_is_present(struct tosa_bat *bat)
+{
+	return gpio_get_value(TOSA_GPIO_JACKET_DETECT) == 0;
+}
+
+static void tosa_bat_external_power_changed(struct power_supply *psy)
+{
+	schedule_work(&bat_work);
+}
+
+static irqreturn_t tosa_bat_gpio_isr(int irq, void *data)
+{
+	pr_info("tosa_bat_gpio irq: %d\n", gpio_get_value(irq_to_gpio(irq)));
+	schedule_work(&bat_work);
+	return IRQ_HANDLED;
+}
+
+static void tosa_bat_update(struct tosa_bat *bat)
+{
+	int old;
+	struct power_supply *psy = &bat->psy;
+
+	mutex_lock(&bat->work_lock);
+
+	old = bat->status;
+
+	if (bat->is_present && !bat->is_present(bat)) {
+		printk(KERN_NOTICE "%s not present\n", psy->name);
+		bat->status = POWER_SUPPLY_STATUS_UNKNOWN;
+		bat->full_chrg = -1;
+	} else if (power_supply_am_i_supplied(psy)) {
+		if (bat->status == POWER_SUPPLY_STATUS_DISCHARGING) {
+			gpio_set_value(bat->gpio_charge_off, 0);
+			mdelay(15);
+		}
+
+		if (gpio_get_value(bat->gpio_full)) {
+			if (old == POWER_SUPPLY_STATUS_CHARGING ||
+					bat->full_chrg == -1)
+				bat->full_chrg = tosa_read_bat(bat);
+
+			gpio_set_value(bat->gpio_charge_off, 1);
+			bat->status = POWER_SUPPLY_STATUS_FULL;
+		} else {
+			gpio_set_value(bat->gpio_charge_off, 0);
+			bat->status = POWER_SUPPLY_STATUS_CHARGING;
+		}
+	} else {
+		gpio_set_value(bat->gpio_charge_off, 1);
+		bat->status = POWER_SUPPLY_STATUS_DISCHARGING;
+	}
+
+	if (old != bat->status)
+		power_supply_changed(psy);
+
+	mutex_unlock(&bat->work_lock);
+}
+
+static void tosa_bat_work(struct work_struct *work)
+{
+	tosa_bat_update(&tosa_bat_main);
+	tosa_bat_update(&tosa_bat_jacket);
+}
+
+
+static enum power_supply_property tosa_bat_main_props[] = {
+	POWER_SUPPLY_PROP_STATUS,
+	POWER_SUPPLY_PROP_TECHNOLOGY,
+	POWER_SUPPLY_PROP_VOLTAGE_NOW,
+	POWER_SUPPLY_PROP_VOLTAGE_MAX,
+	POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN,
+	POWER_SUPPLY_PROP_TEMP,
+	POWER_SUPPLY_PROP_PRESENT,
+};
+
+static enum power_supply_property tosa_bat_bu_props[] = {
+	POWER_SUPPLY_PROP_STATUS,
+	POWER_SUPPLY_PROP_TECHNOLOGY,
+	POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN,
+	POWER_SUPPLY_PROP_VOLTAGE_NOW,
+	POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN,
+	POWER_SUPPLY_PROP_PRESENT,
+};
+
+static struct tosa_bat tosa_bat_main = {
+	.status = POWER_SUPPLY_STATUS_DISCHARGING,
+	.full_chrg = -1,
+	.psy = {
+		.name		= "main-battery",
+		.type		= POWER_SUPPLY_TYPE_BATTERY,
+		.properties	= tosa_bat_main_props,
+		.num_properties	= ARRAY_SIZE(tosa_bat_main_props),
+		.get_property	= tosa_bat_get_property,
+		.external_power_changed = tosa_bat_external_power_changed,
+		.use_for_apm	= 1,
+	},
+
+	.gpio_full = TOSA_GPIO_BAT0_CRG,
+	.gpio_charge_off = TOSA_GPIO_CHARGE_OFF,
+
+	.technology = POWER_SUPPLY_TECHNOLOGY_LIPO,
+
+	.gpio_bat = TOSA_GPIO_BAT0_V_ON,
+	.adc_bat = WM97XX_AUX_ID3,
+	.adc_bat_divider = 414,
+	.bat_max = 4310000,
+	.bat_min = 1551 * 1000000 / 414,
+
+	.gpio_temp = TOSA_GPIO_BAT1_TH_ON,
+	.adc_temp = WM97XX_AUX_ID2,
+	.adc_temp_divider = 10000,
+};
+
+static struct tosa_bat tosa_bat_jacket = {
+	.status = POWER_SUPPLY_STATUS_DISCHARGING,
+	.full_chrg = -1,
+	.psy = {
+		.name		= "jacket-battery",
+		.type		= POWER_SUPPLY_TYPE_BATTERY,
+		.properties	= tosa_bat_main_props,
+		.num_properties	= ARRAY_SIZE(tosa_bat_main_props),
+		.get_property	= tosa_bat_get_property,
+		.external_power_changed = tosa_bat_external_power_changed,
+	},
+
+	.is_present = tosa_jacket_bat_is_present,
+	.gpio_full = TOSA_GPIO_BAT1_CRG,
+	.gpio_charge_off = TOSA_GPIO_CHARGE_OFF_JC,
+
+	.technology = POWER_SUPPLY_TECHNOLOGY_LIPO,
+
+	.gpio_bat = TOSA_GPIO_BAT1_V_ON,
+	.adc_bat = WM97XX_AUX_ID3,
+	.adc_bat_divider = 414,
+	.bat_max = 4310000,
+	.bat_min = 1551 * 1000000 / 414,
+
+	.gpio_temp = TOSA_GPIO_BAT0_TH_ON,
+	.adc_temp = WM97XX_AUX_ID2,
+	.adc_temp_divider = 10000,
+};
+
+static struct tosa_bat tosa_bat_bu = {
+	.status = POWER_SUPPLY_STATUS_UNKNOWN,
+	.full_chrg = -1,
+
+	.psy = {
+		.name		= "backup-battery",
+		.type		= POWER_SUPPLY_TYPE_BATTERY,
+		.properties	= tosa_bat_bu_props,
+		.num_properties	= ARRAY_SIZE(tosa_bat_bu_props),
+		.get_property	= tosa_bat_get_property,
+		.external_power_changed = tosa_bat_external_power_changed,
+	},
+
+	.gpio_full = -1,
+	.gpio_charge_off = -1,
+
+	.technology = POWER_SUPPLY_TECHNOLOGY_LiMn,
+
+	.gpio_bat = TOSA_GPIO_BU_CHRG_ON,
+	.adc_bat = WM97XX_AUX_ID4,
+	.adc_bat_divider = 1266,
+
+	.gpio_temp = -1,
+	.adc_temp = -1,
+	.adc_temp_divider = -1,
+};
+
+static struct {
+	int gpio;
+	char *name;
+	bool output;
+	int value;
+} gpios[] = {
+	{ TOSA_GPIO_CHARGE_OFF,		"main charge off",	1, 1 },
+	{ TOSA_GPIO_CHARGE_OFF_JC,	"jacket charge off",	1, 1 },
+	{ TOSA_GPIO_BAT_SW_ON,		"battery switch",	1, 0 },
+	{ TOSA_GPIO_BAT0_V_ON,		"main battery",		1, 0 },
+	{ TOSA_GPIO_BAT1_V_ON,		"jacket battery",	1, 0 },
+	{ TOSA_GPIO_BAT1_TH_ON,		"main battery temp",	1, 0 },
+	{ TOSA_GPIO_BAT0_TH_ON,		"jacket battery temp",	1, 0 },
+	{ TOSA_GPIO_BU_CHRG_ON,		"backup battery",	1, 0 },
+	{ TOSA_GPIO_BAT0_CRG,		"main battery full",	0, 0 },
+	{ TOSA_GPIO_BAT1_CRG,		"jacket battery full",	0, 0 },
+	{ TOSA_GPIO_BAT0_LOW,		"main battery low",	0, 0 },
+	{ TOSA_GPIO_BAT1_LOW,		"jacket battery low",	0, 0 },
+	{ TOSA_GPIO_JACKET_DETECT,	"jacket detect",	0, 0 },
+};
+
+#ifdef CONFIG_PM
+static int tosa_bat_suspend(struct platform_device *dev, pm_message_t state)
+{
+	/* flush all pending status updates */
+	flush_scheduled_work();
+	return 0;
+}
+
+static int tosa_bat_resume(struct platform_device *dev)
+{
+	/* things may have changed while we were away */
+	schedule_work(&bat_work);
+	return 0;
+}
+#else
+#define tosa_bat_suspend NULL
+#define tosa_bat_resume NULL
+#endif
+
+static int __devinit tosa_bat_probe(struct platform_device *dev)
+{
+	int ret;
+	int i;
+
+	if (!machine_is_tosa())
+		return -ENODEV;
+
+	for (i = 0; i < ARRAY_SIZE(gpios); i++) {
+		ret = gpio_request(gpios[i].gpio, gpios[i].name);
+		if (ret) {
+			i--;
+			goto err_gpio;
+		}
+
+		if (gpios[i].output)
+			ret = gpio_direction_output(gpios[i].gpio,
+					gpios[i].value);
+		else
+			ret = gpio_direction_input(gpios[i].gpio);
+
+		if (ret)
+			goto err_gpio;
+	}
+
+	mutex_init(&tosa_bat_main.work_lock);
+	mutex_init(&tosa_bat_jacket.work_lock);
+
+	INIT_WORK(&bat_work, tosa_bat_work);
+
+	ret = power_supply_register(&dev->dev, &tosa_bat_main.psy);
+	if (ret)
+		goto err_psy_reg_main;
+	ret = power_supply_register(&dev->dev, &tosa_bat_jacket.psy);
+	if (ret)
+		goto err_psy_reg_jacket;
+	ret = power_supply_register(&dev->dev, &tosa_bat_bu.psy);
+	if (ret)
+		goto err_psy_reg_bu;
+
+	ret = request_irq(gpio_to_irq(TOSA_GPIO_BAT0_CRG),
+				tosa_bat_gpio_isr,
+				IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
+				"main full", &tosa_bat_main);
+	if (ret)
+		goto err_req_main;
+
+	ret = request_irq(gpio_to_irq(TOSA_GPIO_BAT1_CRG),
+				tosa_bat_gpio_isr,
+				IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
+				"jacket full", &tosa_bat_jacket);
+	if (ret)
+		goto err_req_jacket;
+
+	ret = request_irq(gpio_to_irq(TOSA_GPIO_JACKET_DETECT),
+				tosa_bat_gpio_isr,
+				IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
+				"jacket detect", &tosa_bat_jacket);
+	if (!ret) {
+		schedule_work(&bat_work);
+		return 0;
+	}
+
+	free_irq(gpio_to_irq(TOSA_GPIO_BAT1_CRG), &tosa_bat_jacket);
+err_req_jacket:
+	free_irq(gpio_to_irq(TOSA_GPIO_BAT0_CRG), &tosa_bat_main);
+err_req_main:
+	power_supply_unregister(&tosa_bat_bu.psy);
+err_psy_reg_bu:
+	power_supply_unregister(&tosa_bat_jacket.psy);
+err_psy_reg_jacket:
+	power_supply_unregister(&tosa_bat_main.psy);
+err_psy_reg_main:
+
+	/* see comment in tosa_bat_remove */
+	flush_scheduled_work();
+
+	i--;
+err_gpio:
+	for (; i >= 0; i--)
+		gpio_free(gpios[i].gpio);
+
+	return ret;
+}
+
+static int __devexit tosa_bat_remove(struct platform_device *dev)
+{
+	int i;
+
+	free_irq(gpio_to_irq(TOSA_GPIO_JACKET_DETECT), &tosa_bat_jacket);
+	free_irq(gpio_to_irq(TOSA_GPIO_BAT1_CRG), &tosa_bat_jacket);
+	free_irq(gpio_to_irq(TOSA_GPIO_BAT0_CRG), &tosa_bat_main);
+
+	power_supply_unregister(&tosa_bat_bu.psy);
+	power_supply_unregister(&tosa_bat_jacket.psy);
+	power_supply_unregister(&tosa_bat_main.psy);
+
+	/*
+	 * now flush all pending work.
+	 * we won't get any more schedules, since all
+	 * sources (isr and external_power_changed)
+	 * are unregistered now.
+	 */
+	flush_scheduled_work();
+
+	for (i = ARRAY_SIZE(gpios) - 1; i >= 0; i--)
+		gpio_free(gpios[i].gpio);
+
+	return 0;
+}
+
+static struct platform_driver tosa_bat_driver = {
+	.driver.name	= "wm97xx-battery",
+	.driver.owner	= THIS_MODULE,
+	.probe		= tosa_bat_probe,
+	.remove		= __devexit_p(tosa_bat_remove),
+	.suspend	= tosa_bat_suspend,
+	.resume		= tosa_bat_resume,
+};
+
+static int __init tosa_bat_init(void)
+{
+	return platform_driver_register(&tosa_bat_driver);
+}
+
+static void __exit tosa_bat_exit(void)
+{
+	platform_driver_unregister(&tosa_bat_driver);
+}
+
+module_init(tosa_bat_init);
+module_exit(tosa_bat_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Dmitry Baryshkov");
+MODULE_DESCRIPTION("Tosa battery driver");
+MODULE_ALIAS("platform:wm97xx-battery");
diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig
new file mode 100644
index 000000000000..a656128f1fdd
--- /dev/null
+++ b/drivers/regulator/Kconfig
@@ -0,0 +1,59 @@
+menu "Voltage and Current regulators"
+
+config REGULATOR
+	bool "Voltage and Current Regulator Support"
+	default n
+	help
+	  Generic Voltage and Current Regulator support.
+
+	  This framework is designed to provide a generic interface to voltage
+	  and current regulators within the Linux kernel. It's intended to
+	  provide voltage and current control to client or consumer drivers and
+	  also provide status information to user space applications through a
+	  sysfs interface.
+
+	  The intention is to allow systems to dynamically control regulator
+	  output in order to save power and prolong battery life. This applies
+	  to both voltage regulators (where voltage output is controllable) and
+	  current sinks (where current output is controllable).
+
+	  This framework safely compiles out if not selected so that client
+	  drivers can still be used in systems with no software controllable
+	  regulators.
+
+	  If unsure, say no.
+
+config REGULATOR_DEBUG
+	bool "Regulator debug support"
+	depends on REGULATOR
+	help
+	  Say yes here to enable debugging support.
+
+config REGULATOR_FIXED_VOLTAGE
+	tristate
+	default n
+	select REGULATOR
+
+config REGULATOR_VIRTUAL_CONSUMER
+	tristate "Virtual regulator consumer support"
+	default n
+	select REGULATOR
+	help
+	  This driver provides a virtual consumer for the voltage and
+          current regulator API which provides sysfs controls for
+          configuring the supplies requested.  This is mainly useful
+          for test purposes.
+
+          If unsure, say no.
+
+config REGULATOR_BQ24022
+	tristate "TI bq24022 Dual Input 1-Cell Li-Ion Charger IC"
+	default n
+	select REGULATOR
+	help
+	  This driver controls a TI bq24022 Charger attached via
+	  GPIOs. The provided current regulator can enable/disable
+	  charging select between 100 mA and 500 mA charging current
+	  limit.
+
+endmenu
diff --git a/drivers/regulator/Makefile b/drivers/regulator/Makefile
new file mode 100644
index 000000000000..ac2c64efe65c
--- /dev/null
+++ b/drivers/regulator/Makefile
@@ -0,0 +1,12 @@
+#
+# Makefile for regulator drivers.
+#
+
+
+obj-$(CONFIG_REGULATOR) += core.o
+obj-$(CONFIG_REGULATOR_FIXED_VOLTAGE) += fixed.o
+obj-$(CONFIG_REGULATOR_VIRTUAL_CONSUMER) += virtual.o
+
+obj-$(CONFIG_REGULATOR_BQ24022) += bq24022.o
+
+ccflags-$(CONFIG_REGULATOR_DEBUG) += -DDEBUG
diff --git a/drivers/regulator/bq24022.c b/drivers/regulator/bq24022.c
new file mode 100644
index 000000000000..263699d6152d
--- /dev/null
+++ b/drivers/regulator/bq24022.c
@@ -0,0 +1,167 @@
+/*
+ * Support for TI bq24022 (bqTINY-II) Dual Input (USB/AC Adpater)
+ * 1-Cell Li-Ion Charger connected via GPIOs.
+ *
+ * Copyright (c) 2008 Philipp Zabel
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/err.h>
+#include <linux/gpio.h>
+#include <linux/regulator/bq24022.h>
+#include <linux/regulator/driver.h>
+
+static int bq24022_set_current_limit(struct regulator_dev *rdev,
+					int min_uA, int max_uA)
+{
+	struct platform_device *pdev = rdev_get_drvdata(rdev);
+	struct bq24022_mach_info *pdata = pdev->dev.platform_data;
+
+	dev_dbg(&pdev->dev, "setting current limit to %s mA\n",
+		max_uA >= 500000 ? "500" : "100");
+
+	/* REVISIT: maybe return error if min_uA != 0 ? */
+	gpio_set_value(pdata->gpio_iset2, max_uA >= 500000);
+	return 0;
+}
+
+static int bq24022_get_current_limit(struct regulator_dev *rdev)
+{
+	struct platform_device *pdev = rdev_get_drvdata(rdev);
+	struct bq24022_mach_info *pdata = pdev->dev.platform_data;
+
+	return gpio_get_value(pdata->gpio_iset2) ? 500000 : 100000;
+}
+
+static int bq24022_enable(struct regulator_dev *rdev)
+{
+	struct platform_device *pdev = rdev_get_drvdata(rdev);
+	struct bq24022_mach_info *pdata = pdev->dev.platform_data;
+
+	dev_dbg(&pdev->dev, "enabling charger\n");
+
+	gpio_set_value(pdata->gpio_nce, 0);
+	return 0;
+}
+
+static int bq24022_disable(struct regulator_dev *rdev)
+{
+	struct platform_device *pdev = rdev_get_drvdata(rdev);
+	struct bq24022_mach_info *pdata = pdev->dev.platform_data;
+
+	dev_dbg(&pdev->dev, "disabling charger\n");
+
+	gpio_set_value(pdata->gpio_nce, 1);
+	return 0;
+}
+
+static int bq24022_is_enabled(struct regulator_dev *rdev)
+{
+	struct platform_device *pdev = rdev_get_drvdata(rdev);
+	struct bq24022_mach_info *pdata = pdev->dev.platform_data;
+
+	return !gpio_get_value(pdata->gpio_nce);
+}
+
+static struct regulator_ops bq24022_ops = {
+	.set_current_limit = bq24022_set_current_limit,
+	.get_current_limit = bq24022_get_current_limit,
+	.enable            = bq24022_enable,
+	.disable           = bq24022_disable,
+	.is_enabled        = bq24022_is_enabled,
+};
+
+static struct regulator_desc bq24022_desc = {
+	.name  = "bq24022",
+	.ops   = &bq24022_ops,
+	.type  = REGULATOR_CURRENT,
+};
+
+static int __init bq24022_probe(struct platform_device *pdev)
+{
+	struct bq24022_mach_info *pdata = pdev->dev.platform_data;
+	struct regulator_dev *bq24022;
+	int ret;
+
+	if (!pdata || !pdata->gpio_nce || !pdata->gpio_iset2)
+		return -EINVAL;
+
+	ret = gpio_request(pdata->gpio_nce, "ncharge_en");
+	if (ret) {
+		dev_dbg(&pdev->dev, "couldn't request nCE GPIO: %d\n",
+			pdata->gpio_nce);
+		goto err_ce;
+	}
+	ret = gpio_request(pdata->gpio_iset2, "charge_mode");
+	if (ret) {
+		dev_dbg(&pdev->dev, "couldn't request ISET2 GPIO: %d\n",
+			pdata->gpio_iset2);
+		goto err_iset2;
+	}
+	ret = gpio_direction_output(pdata->gpio_iset2, 0);
+	ret = gpio_direction_output(pdata->gpio_nce, 1);
+
+	bq24022 = regulator_register(&bq24022_desc, pdev);
+	if (IS_ERR(bq24022)) {
+		dev_dbg(&pdev->dev, "couldn't register regulator\n");
+		ret = PTR_ERR(bq24022);
+		goto err_reg;
+	}
+	platform_set_drvdata(pdev, bq24022);
+	dev_dbg(&pdev->dev, "registered regulator\n");
+
+	return 0;
+err_reg:
+	gpio_free(pdata->gpio_iset2);
+err_iset2:
+	gpio_free(pdata->gpio_nce);
+err_ce:
+	return ret;
+}
+
+static int __devexit bq24022_remove(struct platform_device *pdev)
+{
+	struct bq24022_mach_info *pdata = pdev->dev.platform_data;
+	struct regulator_dev *bq24022 = platform_get_drvdata(pdev);
+
+	regulator_unregister(bq24022);
+	gpio_free(pdata->gpio_iset2);
+	gpio_free(pdata->gpio_nce);
+
+	return 0;
+}
+
+static struct platform_driver bq24022_driver = {
+	.driver = {
+		.name = "bq24022",
+	},
+	.remove = __devexit_p(bq24022_remove),
+};
+
+static int __init bq24022_init(void)
+{
+	return platform_driver_probe(&bq24022_driver, bq24022_probe);
+}
+
+static void __exit bq24022_exit(void)
+{
+	platform_driver_unregister(&bq24022_driver);
+}
+
+/*
+ * make sure this is probed before gpio_vbus and pda_power,
+ * but after asic3 or other GPIO expander drivers.
+ */
+subsys_initcall(bq24022_init);
+module_exit(bq24022_exit);
+
+MODULE_AUTHOR("Philipp Zabel");
+MODULE_DESCRIPTION("TI bq24022 Li-Ion Charger driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/regulator/core.c b/drivers/regulator/core.c
new file mode 100644
index 000000000000..9c7986261568
--- /dev/null
+++ b/drivers/regulator/core.c
@@ -0,0 +1,1903 @@
+/*
+ * core.c  --  Voltage/Current Regulator framework.
+ *
+ * Copyright 2007, 2008 Wolfson Microelectronics PLC.
+ *
+ * Author: Liam Girdwood <liam.girdwood@wolfsonmicro.com>
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/device.h>
+#include <linux/err.h>
+#include <linux/mutex.h>
+#include <linux/suspend.h>
+#include <linux/regulator/consumer.h>
+#include <linux/regulator/driver.h>
+#include <linux/regulator/machine.h>
+
+#define REGULATOR_VERSION "0.5"
+
+static DEFINE_MUTEX(regulator_list_mutex);
+static LIST_HEAD(regulator_list);
+static LIST_HEAD(regulator_map_list);
+
+/**
+ * struct regulator_dev
+ *
+ * Voltage / Current regulator class device. One for each regulator.
+ */
+struct regulator_dev {
+	struct regulator_desc *desc;
+	int use_count;
+
+	/* lists we belong to */
+	struct list_head list; /* list of all regulators */
+	struct list_head slist; /* list of supplied regulators */
+
+	/* lists we own */
+	struct list_head consumer_list; /* consumers we supply */
+	struct list_head supply_list; /* regulators we supply */
+
+	struct blocking_notifier_head notifier;
+	struct mutex mutex; /* consumer lock */
+	struct module *owner;
+	struct device dev;
+	struct regulation_constraints *constraints;
+	struct regulator_dev *supply;	/* for tree */
+
+	void *reg_data;		/* regulator_dev data */
+};
+
+/**
+ * struct regulator_map
+ *
+ * Used to provide symbolic supply names to devices.
+ */
+struct regulator_map {
+	struct list_head list;
+	struct device *dev;
+	const char *supply;
+	const char *regulator;
+};
+
+static inline struct regulator_dev *to_rdev(struct device *d)
+{
+	return container_of(d, struct regulator_dev, dev);
+}
+
+/*
+ * struct regulator
+ *
+ * One for each consumer device.
+ */
+struct regulator {
+	struct device *dev;
+	struct list_head list;
+	int uA_load;
+	int min_uV;
+	int max_uV;
+	int enabled; /* client has called enabled */
+	char *supply_name;
+	struct device_attribute dev_attr;
+	struct regulator_dev *rdev;
+};
+
+static int _regulator_is_enabled(struct regulator_dev *rdev);
+static int _regulator_disable(struct regulator_dev *rdev);
+static int _regulator_get_voltage(struct regulator_dev *rdev);
+static int _regulator_get_current_limit(struct regulator_dev *rdev);
+static unsigned int _regulator_get_mode(struct regulator_dev *rdev);
+static void _notifier_call_chain(struct regulator_dev *rdev,
+				  unsigned long event, void *data);
+
+/* gets the regulator for a given consumer device */
+static struct regulator *get_device_regulator(struct device *dev)
+{
+	struct regulator *regulator = NULL;
+	struct regulator_dev *rdev;
+
+	mutex_lock(&regulator_list_mutex);
+	list_for_each_entry(rdev, &regulator_list, list) {
+		mutex_lock(&rdev->mutex);
+		list_for_each_entry(regulator, &rdev->consumer_list, list) {
+			if (regulator->dev == dev) {
+				mutex_unlock(&rdev->mutex);
+				mutex_unlock(&regulator_list_mutex);
+				return regulator;
+			}
+		}
+		mutex_unlock(&rdev->mutex);
+	}
+	mutex_unlock(&regulator_list_mutex);
+	return NULL;
+}
+
+/* Platform voltage constraint check */
+static int regulator_check_voltage(struct regulator_dev *rdev,
+				   int *min_uV, int *max_uV)
+{
+	BUG_ON(*min_uV > *max_uV);
+
+	if (!rdev->constraints) {
+		printk(KERN_ERR "%s: no constraints for %s\n", __func__,
+		       rdev->desc->name);
+		return -ENODEV;
+	}
+	if (!(rdev->constraints->valid_ops_mask & REGULATOR_CHANGE_VOLTAGE)) {
+		printk(KERN_ERR "%s: operation not allowed for %s\n",
+		       __func__, rdev->desc->name);
+		return -EPERM;
+	}
+
+	if (*max_uV > rdev->constraints->max_uV)
+		*max_uV = rdev->constraints->max_uV;
+	if (*min_uV < rdev->constraints->min_uV)
+		*min_uV = rdev->constraints->min_uV;
+
+	if (*min_uV > *max_uV)
+		return -EINVAL;
+
+	return 0;
+}
+
+/* current constraint check */
+static int regulator_check_current_limit(struct regulator_dev *rdev,
+					int *min_uA, int *max_uA)
+{
+	BUG_ON(*min_uA > *max_uA);
+
+	if (!rdev->constraints) {
+		printk(KERN_ERR "%s: no constraints for %s\n", __func__,
+		       rdev->desc->name);
+		return -ENODEV;
+	}
+	if (!(rdev->constraints->valid_ops_mask & REGULATOR_CHANGE_CURRENT)) {
+		printk(KERN_ERR "%s: operation not allowed for %s\n",
+		       __func__, rdev->desc->name);
+		return -EPERM;
+	}
+
+	if (*max_uA > rdev->constraints->max_uA)
+		*max_uA = rdev->constraints->max_uA;
+	if (*min_uA < rdev->constraints->min_uA)
+		*min_uA = rdev->constraints->min_uA;
+
+	if (*min_uA > *max_uA)
+		return -EINVAL;
+
+	return 0;
+}
+
+/* operating mode constraint check */
+static int regulator_check_mode(struct regulator_dev *rdev, int mode)
+{
+	if (!rdev->constraints) {
+		printk(KERN_ERR "%s: no constraints for %s\n", __func__,
+		       rdev->desc->name);
+		return -ENODEV;
+	}
+	if (!(rdev->constraints->valid_ops_mask & REGULATOR_CHANGE_MODE)) {
+		printk(KERN_ERR "%s: operation not allowed for %s\n",
+		       __func__, rdev->desc->name);
+		return -EPERM;
+	}
+	if (!(rdev->constraints->valid_modes_mask & mode)) {
+		printk(KERN_ERR "%s: invalid mode %x for %s\n",
+		       __func__, mode, rdev->desc->name);
+		return -EINVAL;
+	}
+	return 0;
+}
+
+/* dynamic regulator mode switching constraint check */
+static int regulator_check_drms(struct regulator_dev *rdev)
+{
+	if (!rdev->constraints) {
+		printk(KERN_ERR "%s: no constraints for %s\n", __func__,
+		       rdev->desc->name);
+		return -ENODEV;
+	}
+	if (!(rdev->constraints->valid_ops_mask & REGULATOR_CHANGE_DRMS)) {
+		printk(KERN_ERR "%s: operation not allowed for %s\n",
+		       __func__, rdev->desc->name);
+		return -EPERM;
+	}
+	return 0;
+}
+
+static ssize_t device_requested_uA_show(struct device *dev,
+			     struct device_attribute *attr, char *buf)
+{
+	struct regulator *regulator;
+
+	regulator = get_device_regulator(dev);
+	if (regulator == NULL)
+		return 0;
+
+	return sprintf(buf, "%d\n", regulator->uA_load);
+}
+
+static ssize_t regulator_uV_show(struct device *dev,
+				struct device_attribute *attr, char *buf)
+{
+	struct regulator_dev *rdev = to_rdev(dev);
+	ssize_t ret;
+
+	mutex_lock(&rdev->mutex);
+	ret = sprintf(buf, "%d\n", _regulator_get_voltage(rdev));
+	mutex_unlock(&rdev->mutex);
+
+	return ret;
+}
+
+static ssize_t regulator_uA_show(struct device *dev,
+				struct device_attribute *attr, char *buf)
+{
+	struct regulator_dev *rdev = to_rdev(dev);
+
+	return sprintf(buf, "%d\n", _regulator_get_current_limit(rdev));
+}
+
+static ssize_t regulator_opmode_show(struct device *dev,
+				    struct device_attribute *attr, char *buf)
+{
+	struct regulator_dev *rdev = to_rdev(dev);
+	int mode = _regulator_get_mode(rdev);
+
+	switch (mode) {
+	case REGULATOR_MODE_FAST:
+		return sprintf(buf, "fast\n");
+	case REGULATOR_MODE_NORMAL:
+		return sprintf(buf, "normal\n");
+	case REGULATOR_MODE_IDLE:
+		return sprintf(buf, "idle\n");
+	case REGULATOR_MODE_STANDBY:
+		return sprintf(buf, "standby\n");
+	}
+	return sprintf(buf, "unknown\n");
+}
+
+static ssize_t regulator_state_show(struct device *dev,
+				   struct device_attribute *attr, char *buf)
+{
+	struct regulator_dev *rdev = to_rdev(dev);
+	int state = _regulator_is_enabled(rdev);
+
+	if (state > 0)
+		return sprintf(buf, "enabled\n");
+	else if (state == 0)
+		return sprintf(buf, "disabled\n");
+	else
+		return sprintf(buf, "unknown\n");
+}
+
+static ssize_t regulator_min_uA_show(struct device *dev,
+				    struct device_attribute *attr, char *buf)
+{
+	struct regulator_dev *rdev = to_rdev(dev);
+
+	if (!rdev->constraints)
+		return sprintf(buf, "constraint not defined\n");
+
+	return sprintf(buf, "%d\n", rdev->constraints->min_uA);
+}
+
+static ssize_t regulator_max_uA_show(struct device *dev,
+				    struct device_attribute *attr, char *buf)
+{
+	struct regulator_dev *rdev = to_rdev(dev);
+
+	if (!rdev->constraints)
+		return sprintf(buf, "constraint not defined\n");
+
+	return sprintf(buf, "%d\n", rdev->constraints->max_uA);
+}
+
+static ssize_t regulator_min_uV_show(struct device *dev,
+				    struct device_attribute *attr, char *buf)
+{
+	struct regulator_dev *rdev = to_rdev(dev);
+
+	if (!rdev->constraints)
+		return sprintf(buf, "constraint not defined\n");
+
+	return sprintf(buf, "%d\n", rdev->constraints->min_uV);
+}
+
+static ssize_t regulator_max_uV_show(struct device *dev,
+				    struct device_attribute *attr, char *buf)
+{
+	struct regulator_dev *rdev = to_rdev(dev);
+
+	if (!rdev->constraints)
+		return sprintf(buf, "constraint not defined\n");
+
+	return sprintf(buf, "%d\n", rdev->constraints->max_uV);
+}
+
+static ssize_t regulator_total_uA_show(struct device *dev,
+				      struct device_attribute *attr, char *buf)
+{
+	struct regulator_dev *rdev = to_rdev(dev);
+	struct regulator *regulator;
+	int uA = 0;
+
+	mutex_lock(&rdev->mutex);
+	list_for_each_entry(regulator, &rdev->consumer_list, list)
+	    uA += regulator->uA_load;
+	mutex_unlock(&rdev->mutex);
+	return sprintf(buf, "%d\n", uA);
+}
+
+static ssize_t regulator_num_users_show(struct device *dev,
+				      struct device_attribute *attr, char *buf)
+{
+	struct regulator_dev *rdev = to_rdev(dev);
+	return sprintf(buf, "%d\n", rdev->use_count);
+}
+
+static ssize_t regulator_type_show(struct device *dev,
+				  struct device_attribute *attr, char *buf)
+{
+	struct regulator_dev *rdev = to_rdev(dev);
+
+	switch (rdev->desc->type) {
+	case REGULATOR_VOLTAGE:
+		return sprintf(buf, "voltage\n");
+	case REGULATOR_CURRENT:
+		return sprintf(buf, "current\n");
+	}
+	return sprintf(buf, "unknown\n");
+}
+
+static ssize_t regulator_suspend_mem_uV_show(struct device *dev,
+				struct device_attribute *attr, char *buf)
+{
+	struct regulator_dev *rdev = to_rdev(dev);
+
+	if (!rdev->constraints)
+		return sprintf(buf, "not defined\n");
+	return sprintf(buf, "%d\n", rdev->constraints->state_mem.uV);
+}
+
+static ssize_t regulator_suspend_disk_uV_show(struct device *dev,
+				struct device_attribute *attr, char *buf)
+{
+	struct regulator_dev *rdev = to_rdev(dev);
+
+	if (!rdev->constraints)
+		return sprintf(buf, "not defined\n");
+	return sprintf(buf, "%d\n", rdev->constraints->state_disk.uV);
+}
+
+static ssize_t regulator_suspend_standby_uV_show(struct device *dev,
+				struct device_attribute *attr, char *buf)
+{
+	struct regulator_dev *rdev = to_rdev(dev);
+
+	if (!rdev->constraints)
+		return sprintf(buf, "not defined\n");
+	return sprintf(buf, "%d\n", rdev->constraints->state_standby.uV);
+}
+
+static ssize_t suspend_opmode_show(struct regulator_dev *rdev,
+	unsigned int mode, char *buf)
+{
+	switch (mode) {
+	case REGULATOR_MODE_FAST:
+		return sprintf(buf, "fast\n");
+	case REGULATOR_MODE_NORMAL:
+		return sprintf(buf, "normal\n");
+	case REGULATOR_MODE_IDLE:
+		return sprintf(buf, "idle\n");
+	case REGULATOR_MODE_STANDBY:
+		return sprintf(buf, "standby\n");
+	}
+	return sprintf(buf, "unknown\n");
+}
+
+static ssize_t regulator_suspend_mem_mode_show(struct device *dev,
+				struct device_attribute *attr, char *buf)
+{
+	struct regulator_dev *rdev = to_rdev(dev);
+
+	if (!rdev->constraints)
+		return sprintf(buf, "not defined\n");
+	return suspend_opmode_show(rdev,
+		rdev->constraints->state_mem.mode, buf);
+}
+
+static ssize_t regulator_suspend_disk_mode_show(struct device *dev,
+				struct device_attribute *attr, char *buf)
+{
+	struct regulator_dev *rdev = to_rdev(dev);
+
+	if (!rdev->constraints)
+		return sprintf(buf, "not defined\n");
+	return suspend_opmode_show(rdev,
+		rdev->constraints->state_disk.mode, buf);
+}
+
+static ssize_t regulator_suspend_standby_mode_show(struct device *dev,
+				struct device_attribute *attr, char *buf)
+{
+	struct regulator_dev *rdev = to_rdev(dev);
+
+	if (!rdev->constraints)
+		return sprintf(buf, "not defined\n");
+	return suspend_opmode_show(rdev,
+		rdev->constraints->state_standby.mode, buf);
+}
+
+static ssize_t regulator_suspend_mem_state_show(struct device *dev,
+				   struct device_attribute *attr, char *buf)
+{
+	struct regulator_dev *rdev = to_rdev(dev);
+
+	if (!rdev->constraints)
+		return sprintf(buf, "not defined\n");
+
+	if (rdev->constraints->state_mem.enabled)
+		return sprintf(buf, "enabled\n");
+	else
+		return sprintf(buf, "disabled\n");
+}
+
+static ssize_t regulator_suspend_disk_state_show(struct device *dev,
+				   struct device_attribute *attr, char *buf)
+{
+	struct regulator_dev *rdev = to_rdev(dev);
+
+	if (!rdev->constraints)
+		return sprintf(buf, "not defined\n");
+
+	if (rdev->constraints->state_disk.enabled)
+		return sprintf(buf, "enabled\n");
+	else
+		return sprintf(buf, "disabled\n");
+}
+
+static ssize_t regulator_suspend_standby_state_show(struct device *dev,
+				   struct device_attribute *attr, char *buf)
+{
+	struct regulator_dev *rdev = to_rdev(dev);
+
+	if (!rdev->constraints)
+		return sprintf(buf, "not defined\n");
+
+	if (rdev->constraints->state_standby.enabled)
+		return sprintf(buf, "enabled\n");
+	else
+		return sprintf(buf, "disabled\n");
+}
+static struct device_attribute regulator_dev_attrs[] = {
+	__ATTR(microvolts, 0444, regulator_uV_show, NULL),
+	__ATTR(microamps, 0444, regulator_uA_show, NULL),
+	__ATTR(opmode, 0444, regulator_opmode_show, NULL),
+	__ATTR(state, 0444, regulator_state_show, NULL),
+	__ATTR(min_microvolts, 0444, regulator_min_uV_show, NULL),
+	__ATTR(min_microamps, 0444, regulator_min_uA_show, NULL),
+	__ATTR(max_microvolts, 0444, regulator_max_uV_show, NULL),
+	__ATTR(max_microamps, 0444, regulator_max_uA_show, NULL),
+	__ATTR(requested_microamps, 0444, regulator_total_uA_show, NULL),
+	__ATTR(num_users, 0444, regulator_num_users_show, NULL),
+	__ATTR(type, 0444, regulator_type_show, NULL),
+	__ATTR(suspend_mem_microvolts, 0444,
+		regulator_suspend_mem_uV_show, NULL),
+	__ATTR(suspend_disk_microvolts, 0444,
+		regulator_suspend_disk_uV_show, NULL),
+	__ATTR(suspend_standby_microvolts, 0444,
+		regulator_suspend_standby_uV_show, NULL),
+	__ATTR(suspend_mem_mode, 0444,
+		regulator_suspend_mem_mode_show, NULL),
+	__ATTR(suspend_disk_mode, 0444,
+		regulator_suspend_disk_mode_show, NULL),
+	__ATTR(suspend_standby_mode, 0444,
+		regulator_suspend_standby_mode_show, NULL),
+	__ATTR(suspend_mem_state, 0444,
+		regulator_suspend_mem_state_show, NULL),
+	__ATTR(suspend_disk_state, 0444,
+		regulator_suspend_disk_state_show, NULL),
+	__ATTR(suspend_standby_state, 0444,
+		regulator_suspend_standby_state_show, NULL),
+	__ATTR_NULL,
+};
+
+static void regulator_dev_release(struct device *dev)
+{
+	struct regulator_dev *rdev = to_rdev(dev);
+	kfree(rdev);
+}
+
+static struct class regulator_class = {
+	.name = "regulator",
+	.dev_release = regulator_dev_release,
+	.dev_attrs = regulator_dev_attrs,
+};
+
+/* Calculate the new optimum regulator operating mode based on the new total
+ * consumer load. All locks held by caller */
+static void drms_uA_update(struct regulator_dev *rdev)
+{
+	struct regulator *sibling;
+	int current_uA = 0, output_uV, input_uV, err;
+	unsigned int mode;
+
+	err = regulator_check_drms(rdev);
+	if (err < 0 || !rdev->desc->ops->get_optimum_mode ||
+	    !rdev->desc->ops->get_voltage || !rdev->desc->ops->set_mode);
+	return;
+
+	/* get output voltage */
+	output_uV = rdev->desc->ops->get_voltage(rdev);
+	if (output_uV <= 0)
+		return;
+
+	/* get input voltage */
+	if (rdev->supply && rdev->supply->desc->ops->get_voltage)
+		input_uV = rdev->supply->desc->ops->get_voltage(rdev->supply);
+	else
+		input_uV = rdev->constraints->input_uV;
+	if (input_uV <= 0)
+		return;
+
+	/* calc total requested load */
+	list_for_each_entry(sibling, &rdev->consumer_list, list)
+	    current_uA += sibling->uA_load;
+
+	/* now get the optimum mode for our new total regulator load */
+	mode = rdev->desc->ops->get_optimum_mode(rdev, input_uV,
+						  output_uV, current_uA);
+
+	/* check the new mode is allowed */
+	err = regulator_check_mode(rdev, mode);
+	if (err == 0)
+		rdev->desc->ops->set_mode(rdev, mode);
+}
+
+static int suspend_set_state(struct regulator_dev *rdev,
+	struct regulator_state *rstate)
+{
+	int ret = 0;
+
+	/* enable & disable are mandatory for suspend control */
+	if (!rdev->desc->ops->set_suspend_enable ||
+		!rdev->desc->ops->set_suspend_disable)
+		return -EINVAL;
+
+	if (rstate->enabled)
+		ret = rdev->desc->ops->set_suspend_enable(rdev);
+	else
+		ret = rdev->desc->ops->set_suspend_disable(rdev);
+	if (ret < 0) {
+		printk(KERN_ERR "%s: failed to enabled/disable\n", __func__);
+		return ret;
+	}
+
+	if (rdev->desc->ops->set_suspend_voltage && rstate->uV > 0) {
+		ret = rdev->desc->ops->set_suspend_voltage(rdev, rstate->uV);
+		if (ret < 0) {
+			printk(KERN_ERR "%s: failed to set voltage\n",
+				__func__);
+			return ret;
+		}
+	}
+
+	if (rdev->desc->ops->set_suspend_mode && rstate->mode > 0) {
+		ret = rdev->desc->ops->set_suspend_mode(rdev, rstate->mode);
+		if (ret < 0) {
+			printk(KERN_ERR "%s: failed to set mode\n", __func__);
+			return ret;
+		}
+	}
+	return ret;
+}
+
+/* locks held by caller */
+static int suspend_prepare(struct regulator_dev *rdev, suspend_state_t state)
+{
+	if (!rdev->constraints)
+		return -EINVAL;
+
+	switch (state) {
+	case PM_SUSPEND_STANDBY:
+		return suspend_set_state(rdev,
+			&rdev->constraints->state_standby);
+	case PM_SUSPEND_MEM:
+		return suspend_set_state(rdev,
+			&rdev->constraints->state_mem);
+	case PM_SUSPEND_MAX:
+		return suspend_set_state(rdev,
+			&rdev->constraints->state_disk);
+	default:
+		return -EINVAL;
+	}
+}
+
+static void print_constraints(struct regulator_dev *rdev)
+{
+	struct regulation_constraints *constraints = rdev->constraints;
+	char buf[80];
+	int count;
+
+	if (rdev->desc->type == REGULATOR_VOLTAGE) {
+		if (constraints->min_uV == constraints->max_uV)
+			count = sprintf(buf, "%d mV ",
+					constraints->min_uV / 1000);
+		else
+			count = sprintf(buf, "%d <--> %d mV ",
+					constraints->min_uV / 1000,
+					constraints->max_uV / 1000);
+	} else {
+		if (constraints->min_uA == constraints->max_uA)
+			count = sprintf(buf, "%d mA ",
+					constraints->min_uA / 1000);
+		else
+			count = sprintf(buf, "%d <--> %d mA ",
+					constraints->min_uA / 1000,
+					constraints->max_uA / 1000);
+	}
+	if (constraints->valid_modes_mask & REGULATOR_MODE_FAST)
+		count += sprintf(buf + count, "fast ");
+	if (constraints->valid_modes_mask & REGULATOR_MODE_NORMAL)
+		count += sprintf(buf + count, "normal ");
+	if (constraints->valid_modes_mask & REGULATOR_MODE_IDLE)
+		count += sprintf(buf + count, "idle ");
+	if (constraints->valid_modes_mask & REGULATOR_MODE_STANDBY)
+		count += sprintf(buf + count, "standby");
+
+	printk(KERN_INFO "regulator: %s: %s\n", rdev->desc->name, buf);
+}
+
+#define REG_STR_SIZE	32
+
+static struct regulator *create_regulator(struct regulator_dev *rdev,
+					  struct device *dev,
+					  const char *supply_name)
+{
+	struct regulator *regulator;
+	char buf[REG_STR_SIZE];
+	int err, size;
+
+	regulator = kzalloc(sizeof(*regulator), GFP_KERNEL);
+	if (regulator == NULL)
+		return NULL;
+
+	mutex_lock(&rdev->mutex);
+	regulator->rdev = rdev;
+	list_add(&regulator->list, &rdev->consumer_list);
+
+	if (dev) {
+		/* create a 'requested_microamps_name' sysfs entry */
+		size = scnprintf(buf, REG_STR_SIZE, "microamps_requested_%s",
+			supply_name);
+		if (size >= REG_STR_SIZE)
+			goto overflow_err;
+
+		regulator->dev = dev;
+		regulator->dev_attr.attr.name = kstrdup(buf, GFP_KERNEL);
+		if (regulator->dev_attr.attr.name == NULL)
+			goto attr_name_err;
+
+		regulator->dev_attr.attr.owner = THIS_MODULE;
+		regulator->dev_attr.attr.mode = 0444;
+		regulator->dev_attr.show = device_requested_uA_show;
+		err = device_create_file(dev, &regulator->dev_attr);
+		if (err < 0) {
+			printk(KERN_WARNING "%s: could not add regulator_dev"
+				" load sysfs\n", __func__);
+			goto attr_name_err;
+		}
+
+		/* also add a link to the device sysfs entry */
+		size = scnprintf(buf, REG_STR_SIZE, "%s-%s",
+				 dev->kobj.name, supply_name);
+		if (size >= REG_STR_SIZE)
+			goto attr_err;
+
+		regulator->supply_name = kstrdup(buf, GFP_KERNEL);
+		if (regulator->supply_name == NULL)
+			goto attr_err;
+
+		err = sysfs_create_link(&rdev->dev.kobj, &dev->kobj,
+					buf);
+		if (err) {
+			printk(KERN_WARNING
+			       "%s: could not add device link %s err %d\n",
+			       __func__, dev->kobj.name, err);
+			device_remove_file(dev, &regulator->dev_attr);
+			goto link_name_err;
+		}
+	}
+	mutex_unlock(&rdev->mutex);
+	return regulator;
+link_name_err:
+	kfree(regulator->supply_name);
+attr_err:
+	device_remove_file(regulator->dev, &regulator->dev_attr);
+attr_name_err:
+	kfree(regulator->dev_attr.attr.name);
+overflow_err:
+	list_del(&regulator->list);
+	kfree(regulator);
+	mutex_unlock(&rdev->mutex);
+	return NULL;
+}
+
+/**
+ * regulator_get - lookup and obtain a reference to a regulator.
+ * @dev: device for regulator "consumer"
+ * @id: Supply name or regulator ID.
+ *
+ * Returns a struct regulator corresponding to the regulator producer,
+ * or IS_ERR() condition containing errno.  Use of supply names
+ * configured via regulator_set_device_supply() is strongly
+ * encouraged.
+ */
+struct regulator *regulator_get(struct device *dev, const char *id)
+{
+	struct regulator_dev *rdev;
+	struct regulator_map *map;
+	struct regulator *regulator = ERR_PTR(-ENODEV);
+	const char *supply = id;
+
+	if (id == NULL) {
+		printk(KERN_ERR "regulator: get() with no identifier\n");
+		return regulator;
+	}
+
+	mutex_lock(&regulator_list_mutex);
+
+	list_for_each_entry(map, &regulator_map_list, list) {
+		if (dev == map->dev &&
+		    strcmp(map->supply, id) == 0) {
+			supply = map->regulator;
+			break;
+		}
+	}
+
+	list_for_each_entry(rdev, &regulator_list, list) {
+		if (strcmp(supply, rdev->desc->name) == 0 &&
+		    try_module_get(rdev->owner))
+			goto found;
+	}
+	printk(KERN_ERR "regulator: Unable to get requested regulator: %s\n",
+	       id);
+	mutex_unlock(&regulator_list_mutex);
+	return regulator;
+
+found:
+	regulator = create_regulator(rdev, dev, id);
+	if (regulator == NULL) {
+		regulator = ERR_PTR(-ENOMEM);
+		module_put(rdev->owner);
+	}
+
+	mutex_unlock(&regulator_list_mutex);
+	return regulator;
+}
+EXPORT_SYMBOL_GPL(regulator_get);
+
+/**
+ * regulator_put - "free" the regulator source
+ * @regulator: regulator source
+ *
+ * Note: drivers must ensure that all regulator_enable calls made on this
+ * regulator source are balanced by regulator_disable calls prior to calling
+ * this function.
+ */
+void regulator_put(struct regulator *regulator)
+{
+	struct regulator_dev *rdev;
+
+	if (regulator == NULL || IS_ERR(regulator))
+		return;
+
+	if (regulator->enabled) {
+		printk(KERN_WARNING "Releasing supply %s while enabled\n",
+		       regulator->supply_name);
+		WARN_ON(regulator->enabled);
+		regulator_disable(regulator);
+	}
+
+	mutex_lock(&regulator_list_mutex);
+	rdev = regulator->rdev;
+
+	/* remove any sysfs entries */
+	if (regulator->dev) {
+		sysfs_remove_link(&rdev->dev.kobj, regulator->supply_name);
+		kfree(regulator->supply_name);
+		device_remove_file(regulator->dev, &regulator->dev_attr);
+		kfree(regulator->dev_attr.attr.name);
+	}
+	list_del(&regulator->list);
+	kfree(regulator);
+
+	module_put(rdev->owner);
+	mutex_unlock(&regulator_list_mutex);
+}
+EXPORT_SYMBOL_GPL(regulator_put);
+
+/* locks held by regulator_enable() */
+static int _regulator_enable(struct regulator_dev *rdev)
+{
+	int ret = -EINVAL;
+
+	if (!rdev->constraints) {
+		printk(KERN_ERR "%s: %s has no constraints\n",
+		       __func__, rdev->desc->name);
+		return ret;
+	}
+
+	/* do we need to enable the supply regulator first */
+	if (rdev->supply) {
+		ret = _regulator_enable(rdev->supply);
+		if (ret < 0) {
+			printk(KERN_ERR "%s: failed to enable %s: %d\n",
+			       __func__, rdev->desc->name, ret);
+			return ret;
+		}
+	}
+
+	/* check voltage and requested load before enabling */
+	if (rdev->desc->ops->enable) {
+
+		if (rdev->constraints &&
+			(rdev->constraints->valid_ops_mask &
+			REGULATOR_CHANGE_DRMS))
+			drms_uA_update(rdev);
+
+		ret = rdev->desc->ops->enable(rdev);
+		if (ret < 0) {
+			printk(KERN_ERR "%s: failed to enable %s: %d\n",
+			       __func__, rdev->desc->name, ret);
+			return ret;
+		}
+		rdev->use_count++;
+		return ret;
+	}
+
+	return ret;
+}
+
+/**
+ * regulator_enable - enable regulator output
+ * @regulator: regulator source
+ *
+ * Enable the regulator output at the predefined voltage or current value.
+ * NOTE: the output value can be set by other drivers, boot loader or may be
+ * hardwired in the regulator.
+ * NOTE: calls to regulator_enable() must be balanced with calls to
+ * regulator_disable().
+ */
+int regulator_enable(struct regulator *regulator)
+{
+	int ret;
+
+	if (regulator->enabled) {
+		printk(KERN_CRIT "Regulator %s already enabled\n",
+		       regulator->supply_name);
+		WARN_ON(regulator->enabled);
+		return 0;
+	}
+
+	mutex_lock(&regulator->rdev->mutex);
+	regulator->enabled = 1;
+	ret = _regulator_enable(regulator->rdev);
+	if (ret != 0)
+		regulator->enabled = 0;
+	mutex_unlock(&regulator->rdev->mutex);
+	return ret;
+}
+EXPORT_SYMBOL_GPL(regulator_enable);
+
+/* locks held by regulator_disable() */
+static int _regulator_disable(struct regulator_dev *rdev)
+{
+	int ret = 0;
+
+	/* are we the last user and permitted to disable ? */
+	if (rdev->use_count == 1 && !rdev->constraints->always_on) {
+
+		/* we are last user */
+		if (rdev->desc->ops->disable) {
+			ret = rdev->desc->ops->disable(rdev);
+			if (ret < 0) {
+				printk(KERN_ERR "%s: failed to disable %s\n",
+				       __func__, rdev->desc->name);
+				return ret;
+			}
+		}
+
+		/* decrease our supplies ref count and disable if required */
+		if (rdev->supply)
+			_regulator_disable(rdev->supply);
+
+		rdev->use_count = 0;
+	} else if (rdev->use_count > 1) {
+
+		if (rdev->constraints &&
+			(rdev->constraints->valid_ops_mask &
+			REGULATOR_CHANGE_DRMS))
+			drms_uA_update(rdev);
+
+		rdev->use_count--;
+	}
+	return ret;
+}
+
+/**
+ * regulator_disable - disable regulator output
+ * @regulator: regulator source
+ *
+ * Disable the regulator output voltage or current.
+ * NOTE: this will only disable the regulator output if no other consumer
+ * devices have it enabled.
+ * NOTE: calls to regulator_enable() must be balanced with calls to
+ * regulator_disable().
+ */
+int regulator_disable(struct regulator *regulator)
+{
+	int ret;
+
+	if (!regulator->enabled) {
+		printk(KERN_ERR "%s: not in use by this consumer\n",
+			__func__);
+		return 0;
+	}
+
+	mutex_lock(&regulator->rdev->mutex);
+	regulator->enabled = 0;
+	regulator->uA_load = 0;
+	ret = _regulator_disable(regulator->rdev);
+	mutex_unlock(&regulator->rdev->mutex);
+	return ret;
+}
+EXPORT_SYMBOL_GPL(regulator_disable);
+
+/* locks held by regulator_force_disable() */
+static int _regulator_force_disable(struct regulator_dev *rdev)
+{
+	int ret = 0;
+
+	/* force disable */
+	if (rdev->desc->ops->disable) {
+		/* ah well, who wants to live forever... */
+		ret = rdev->desc->ops->disable(rdev);
+		if (ret < 0) {
+			printk(KERN_ERR "%s: failed to force disable %s\n",
+			       __func__, rdev->desc->name);
+			return ret;
+		}
+		/* notify other consumers that power has been forced off */
+		_notifier_call_chain(rdev, REGULATOR_EVENT_FORCE_DISABLE,
+			NULL);
+	}
+
+	/* decrease our supplies ref count and disable if required */
+	if (rdev->supply)
+		_regulator_disable(rdev->supply);
+
+	rdev->use_count = 0;
+	return ret;
+}
+
+/**
+ * regulator_force_disable - force disable regulator output
+ * @regulator: regulator source
+ *
+ * Forcibly disable the regulator output voltage or current.
+ * NOTE: this *will* disable the regulator output even if other consumer
+ * devices have it enabled. This should be used for situations when device
+ * damage will likely occur if the regulator is not disabled (e.g. over temp).
+ */
+int regulator_force_disable(struct regulator *regulator)
+{
+	int ret;
+
+	mutex_lock(&regulator->rdev->mutex);
+	regulator->enabled = 0;
+	regulator->uA_load = 0;
+	ret = _regulator_force_disable(regulator->rdev);
+	mutex_unlock(&regulator->rdev->mutex);
+	return ret;
+}
+EXPORT_SYMBOL_GPL(regulator_force_disable);
+
+static int _regulator_is_enabled(struct regulator_dev *rdev)
+{
+	int ret;
+
+	mutex_lock(&rdev->mutex);
+
+	/* sanity check */
+	if (!rdev->desc->ops->is_enabled) {
+		ret = -EINVAL;
+		goto out;
+	}
+
+	ret = rdev->desc->ops->is_enabled(rdev);
+out:
+	mutex_unlock(&rdev->mutex);
+	return ret;
+}
+
+/**
+ * regulator_is_enabled - is the regulator output enabled
+ * @regulator: regulator source
+ *
+ * Returns zero for disabled otherwise return number of enable requests.
+ */
+int regulator_is_enabled(struct regulator *regulator)
+{
+	return _regulator_is_enabled(regulator->rdev);
+}
+EXPORT_SYMBOL_GPL(regulator_is_enabled);
+
+/**
+ * regulator_set_voltage - set regulator output voltage
+ * @regulator: regulator source
+ * @min_uV: Minimum required voltage in uV
+ * @max_uV: Maximum acceptable voltage in uV
+ *
+ * Sets a voltage regulator to the desired output voltage. This can be set
+ * during any regulator state. IOW, regulator can be disabled or enabled.
+ *
+ * If the regulator is enabled then the voltage will change to the new value
+ * immediately otherwise if the regulator is disabled the regulator will
+ * output at the new voltage when enabled.
+ *
+ * NOTE: If the regulator is shared between several devices then the lowest
+ * request voltage that meets the system constraints will be used.
+ * NOTE: Regulator system constraints must be set for this regulator before
+ * calling this function otherwise this call will fail.
+ */
+int regulator_set_voltage(struct regulator *regulator, int min_uV, int max_uV)
+{
+	struct regulator_dev *rdev = regulator->rdev;
+	int ret;
+
+	mutex_lock(&rdev->mutex);
+
+	/* sanity check */
+	if (!rdev->desc->ops->set_voltage) {
+		ret = -EINVAL;
+		goto out;
+	}
+
+	/* constraints check */
+	ret = regulator_check_voltage(rdev, &min_uV, &max_uV);
+	if (ret < 0)
+		goto out;
+	regulator->min_uV = min_uV;
+	regulator->max_uV = max_uV;
+	ret = rdev->desc->ops->set_voltage(rdev, min_uV, max_uV);
+
+out:
+	mutex_unlock(&rdev->mutex);
+	return ret;
+}
+EXPORT_SYMBOL_GPL(regulator_set_voltage);
+
+static int _regulator_get_voltage(struct regulator_dev *rdev)
+{
+	/* sanity check */
+	if (rdev->desc->ops->get_voltage)
+		return rdev->desc->ops->get_voltage(rdev);
+	else
+		return -EINVAL;
+}
+
+/**
+ * regulator_get_voltage - get regulator output voltage
+ * @regulator: regulator source
+ *
+ * This returns the current regulator voltage in uV.
+ *
+ * NOTE: If the regulator is disabled it will return the voltage value. This
+ * function should not be used to determine regulator state.
+ */
+int regulator_get_voltage(struct regulator *regulator)
+{
+	int ret;
+
+	mutex_lock(&regulator->rdev->mutex);
+
+	ret = _regulator_get_voltage(regulator->rdev);
+
+	mutex_unlock(&regulator->rdev->mutex);
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(regulator_get_voltage);
+
+/**
+ * regulator_set_current_limit - set regulator output current limit
+ * @regulator: regulator source
+ * @min_uA: Minimuum supported current in uA
+ * @max_uA: Maximum supported current in uA
+ *
+ * Sets current sink to the desired output current. This can be set during
+ * any regulator state. IOW, regulator can be disabled or enabled.
+ *
+ * If the regulator is enabled then the current will change to the new value
+ * immediately otherwise if the regulator is disabled the regulator will
+ * output at the new current when enabled.
+ *
+ * NOTE: Regulator system constraints must be set for this regulator before
+ * calling this function otherwise this call will fail.
+ */
+int regulator_set_current_limit(struct regulator *regulator,
+			       int min_uA, int max_uA)
+{
+	struct regulator_dev *rdev = regulator->rdev;
+	int ret;
+
+	mutex_lock(&rdev->mutex);
+
+	/* sanity check */
+	if (!rdev->desc->ops->set_current_limit) {
+		ret = -EINVAL;
+		goto out;
+	}
+
+	/* constraints check */
+	ret = regulator_check_current_limit(rdev, &min_uA, &max_uA);
+	if (ret < 0)
+		goto out;
+
+	ret = rdev->desc->ops->set_current_limit(rdev, min_uA, max_uA);
+out:
+	mutex_unlock(&rdev->mutex);
+	return ret;
+}
+EXPORT_SYMBOL_GPL(regulator_set_current_limit);
+
+static int _regulator_get_current_limit(struct regulator_dev *rdev)
+{
+	int ret;
+
+	mutex_lock(&rdev->mutex);
+
+	/* sanity check */
+	if (!rdev->desc->ops->get_current_limit) {
+		ret = -EINVAL;
+		goto out;
+	}
+
+	ret = rdev->desc->ops->get_current_limit(rdev);
+out:
+	mutex_unlock(&rdev->mutex);
+	return ret;
+}
+
+/**
+ * regulator_get_current_limit - get regulator output current
+ * @regulator: regulator source
+ *
+ * This returns the current supplied by the specified current sink in uA.
+ *
+ * NOTE: If the regulator is disabled it will return the current value. This
+ * function should not be used to determine regulator state.
+ */
+int regulator_get_current_limit(struct regulator *regulator)
+{
+	return _regulator_get_current_limit(regulator->rdev);
+}
+EXPORT_SYMBOL_GPL(regulator_get_current_limit);
+
+/**
+ * regulator_set_mode - set regulator operating mode
+ * @regulator: regulator source
+ * @mode: operating mode - one of the REGULATOR_MODE constants
+ *
+ * Set regulator operating mode to increase regulator efficiency or improve
+ * regulation performance.
+ *
+ * NOTE: Regulator system constraints must be set for this regulator before
+ * calling this function otherwise this call will fail.
+ */
+int regulator_set_mode(struct regulator *regulator, unsigned int mode)
+{
+	struct regulator_dev *rdev = regulator->rdev;
+	int ret;
+
+	mutex_lock(&rdev->mutex);
+
+	/* sanity check */
+	if (!rdev->desc->ops->set_mode) {
+		ret = -EINVAL;
+		goto out;
+	}
+
+	/* constraints check */
+	ret = regulator_check_mode(rdev, mode);
+	if (ret < 0)
+		goto out;
+
+	ret = rdev->desc->ops->set_mode(rdev, mode);
+out:
+	mutex_unlock(&rdev->mutex);
+	return ret;
+}
+EXPORT_SYMBOL_GPL(regulator_set_mode);
+
+static unsigned int _regulator_get_mode(struct regulator_dev *rdev)
+{
+	int ret;
+
+	mutex_lock(&rdev->mutex);
+
+	/* sanity check */
+	if (!rdev->desc->ops->get_mode) {
+		ret = -EINVAL;
+		goto out;
+	}
+
+	ret = rdev->desc->ops->get_mode(rdev);
+out:
+	mutex_unlock(&rdev->mutex);
+	return ret;
+}
+
+/**
+ * regulator_get_mode - get regulator operating mode
+ * @regulator: regulator source
+ *
+ * Get the current regulator operating mode.
+ */
+unsigned int regulator_get_mode(struct regulator *regulator)
+{
+	return _regulator_get_mode(regulator->rdev);
+}
+EXPORT_SYMBOL_GPL(regulator_get_mode);
+
+/**
+ * regulator_set_optimum_mode - set regulator optimum operating mode
+ * @regulator: regulator source
+ * @uA_load: load current
+ *
+ * Notifies the regulator core of a new device load. This is then used by
+ * DRMS (if enabled by constraints) to set the most efficient regulator
+ * operating mode for the new regulator loading.
+ *
+ * Consumer devices notify their supply regulator of the maximum power
+ * they will require (can be taken from device datasheet in the power
+ * consumption tables) when they change operational status and hence power
+ * state. Examples of operational state changes that can affect power
+ * consumption are :-
+ *
+ *    o Device is opened / closed.
+ *    o Device I/O is about to begin or has just finished.
+ *    o Device is idling in between work.
+ *
+ * This information is also exported via sysfs to userspace.
+ *
+ * DRMS will sum the total requested load on the regulator and change
+ * to the most efficient operating mode if platform constraints allow.
+ *
+ * Returns the new regulator mode or error.
+ */
+int regulator_set_optimum_mode(struct regulator *regulator, int uA_load)
+{
+	struct regulator_dev *rdev = regulator->rdev;
+	struct regulator *consumer;
+	int ret, output_uV, input_uV, total_uA_load = 0;
+	unsigned int mode;
+
+	mutex_lock(&rdev->mutex);
+
+	regulator->uA_load = uA_load;
+	ret = regulator_check_drms(rdev);
+	if (ret < 0)
+		goto out;
+	ret = -EINVAL;
+
+	/* sanity check */
+	if (!rdev->desc->ops->get_optimum_mode)
+		goto out;
+
+	/* get output voltage */
+	output_uV = rdev->desc->ops->get_voltage(rdev);
+	if (output_uV <= 0) {
+		printk(KERN_ERR "%s: invalid output voltage found for %s\n",
+			__func__, rdev->desc->name);
+		goto out;
+	}
+
+	/* get input voltage */
+	if (rdev->supply && rdev->supply->desc->ops->get_voltage)
+		input_uV = rdev->supply->desc->ops->get_voltage(rdev->supply);
+	else
+		input_uV = rdev->constraints->input_uV;
+	if (input_uV <= 0) {
+		printk(KERN_ERR "%s: invalid input voltage found for %s\n",
+			__func__, rdev->desc->name);
+		goto out;
+	}
+
+	/* calc total requested load for this regulator */
+	list_for_each_entry(consumer, &rdev->consumer_list, list)
+	    total_uA_load += consumer->uA_load;
+
+	mode = rdev->desc->ops->get_optimum_mode(rdev,
+						 input_uV, output_uV,
+						 total_uA_load);
+	if (ret <= 0) {
+		printk(KERN_ERR "%s: failed to get optimum mode for %s @"
+			" %d uA %d -> %d uV\n", __func__, rdev->desc->name,
+			total_uA_load, input_uV, output_uV);
+		goto out;
+	}
+
+	ret = rdev->desc->ops->set_mode(rdev, mode);
+	if (ret <= 0) {
+		printk(KERN_ERR "%s: failed to set optimum mode %x for %s\n",
+			__func__, mode, rdev->desc->name);
+		goto out;
+	}
+	ret = mode;
+out:
+	mutex_unlock(&rdev->mutex);
+	return ret;
+}
+EXPORT_SYMBOL_GPL(regulator_set_optimum_mode);
+
+/**
+ * regulator_register_notifier - register regulator event notifier
+ * @regulator: regulator source
+ * @notifier_block: notifier block
+ *
+ * Register notifier block to receive regulator events.
+ */
+int regulator_register_notifier(struct regulator *regulator,
+			      struct notifier_block *nb)
+{
+	return blocking_notifier_chain_register(&regulator->rdev->notifier,
+						nb);
+}
+EXPORT_SYMBOL_GPL(regulator_register_notifier);
+
+/**
+ * regulator_unregister_notifier - unregister regulator event notifier
+ * @regulator: regulator source
+ * @notifier_block: notifier block
+ *
+ * Unregister regulator event notifier block.
+ */
+int regulator_unregister_notifier(struct regulator *regulator,
+				struct notifier_block *nb)
+{
+	return blocking_notifier_chain_unregister(&regulator->rdev->notifier,
+						  nb);
+}
+EXPORT_SYMBOL_GPL(regulator_unregister_notifier);
+
+/* notify regulator consumers and downstream regulator consumers */
+static void _notifier_call_chain(struct regulator_dev *rdev,
+				  unsigned long event, void *data)
+{
+	struct regulator_dev *_rdev;
+
+	/* call rdev chain first */
+	mutex_lock(&rdev->mutex);
+	blocking_notifier_call_chain(&rdev->notifier, event, NULL);
+	mutex_unlock(&rdev->mutex);
+
+	/* now notify regulator we supply */
+	list_for_each_entry(_rdev, &rdev->supply_list, slist)
+		_notifier_call_chain(_rdev, event, data);
+}
+
+/**
+ * regulator_bulk_get - get multiple regulator consumers
+ *
+ * @dev:           Device to supply
+ * @num_consumers: Number of consumers to register
+ * @consumers:     Configuration of consumers; clients are stored here.
+ *
+ * @return 0 on success, an errno on failure.
+ *
+ * This helper function allows drivers to get several regulator
+ * consumers in one operation.  If any of the regulators cannot be
+ * acquired then any regulators that were allocated will be freed
+ * before returning to the caller.
+ */
+int regulator_bulk_get(struct device *dev, int num_consumers,
+		       struct regulator_bulk_data *consumers)
+{
+	int i;
+	int ret;
+
+	for (i = 0; i < num_consumers; i++)
+		consumers[i].consumer = NULL;
+
+	for (i = 0; i < num_consumers; i++) {
+		consumers[i].consumer = regulator_get(dev,
+						      consumers[i].supply);
+		if (IS_ERR(consumers[i].consumer)) {
+			dev_err(dev, "Failed to get supply '%s'\n",
+				consumers[i].supply);
+			ret = PTR_ERR(consumers[i].consumer);
+			consumers[i].consumer = NULL;
+			goto err;
+		}
+	}
+
+	return 0;
+
+err:
+	for (i = 0; i < num_consumers && consumers[i].consumer; i++)
+		regulator_put(consumers[i].consumer);
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(regulator_bulk_get);
+
+/**
+ * regulator_bulk_enable - enable multiple regulator consumers
+ *
+ * @num_consumers: Number of consumers
+ * @consumers:     Consumer data; clients are stored here.
+ * @return         0 on success, an errno on failure
+ *
+ * This convenience API allows consumers to enable multiple regulator
+ * clients in a single API call.  If any consumers cannot be enabled
+ * then any others that were enabled will be disabled again prior to
+ * return.
+ */
+int regulator_bulk_enable(int num_consumers,
+			  struct regulator_bulk_data *consumers)
+{
+	int i;
+	int ret;
+
+	for (i = 0; i < num_consumers; i++) {
+		ret = regulator_enable(consumers[i].consumer);
+		if (ret != 0)
+			goto err;
+	}
+
+	return 0;
+
+err:
+	printk(KERN_ERR "Failed to enable %s\n", consumers[i].supply);
+	for (i = 0; i < num_consumers; i++)
+		regulator_disable(consumers[i].consumer);
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(regulator_bulk_enable);
+
+/**
+ * regulator_bulk_disable - disable multiple regulator consumers
+ *
+ * @num_consumers: Number of consumers
+ * @consumers:     Consumer data; clients are stored here.
+ * @return         0 on success, an errno on failure
+ *
+ * This convenience API allows consumers to disable multiple regulator
+ * clients in a single API call.  If any consumers cannot be enabled
+ * then any others that were disabled will be disabled again prior to
+ * return.
+ */
+int regulator_bulk_disable(int num_consumers,
+			   struct regulator_bulk_data *consumers)
+{
+	int i;
+	int ret;
+
+	for (i = 0; i < num_consumers; i++) {
+		ret = regulator_disable(consumers[i].consumer);
+		if (ret != 0)
+			goto err;
+	}
+
+	return 0;
+
+err:
+	printk(KERN_ERR "Failed to disable %s\n", consumers[i].supply);
+	for (i = 0; i < num_consumers; i++)
+		regulator_enable(consumers[i].consumer);
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(regulator_bulk_disable);
+
+/**
+ * regulator_bulk_free - free multiple regulator consumers
+ *
+ * @num_consumers: Number of consumers
+ * @consumers:     Consumer data; clients are stored here.
+ *
+ * This convenience API allows consumers to free multiple regulator
+ * clients in a single API call.
+ */
+void regulator_bulk_free(int num_consumers,
+			 struct regulator_bulk_data *consumers)
+{
+	int i;
+
+	for (i = 0; i < num_consumers; i++) {
+		regulator_put(consumers[i].consumer);
+		consumers[i].consumer = NULL;
+	}
+}
+EXPORT_SYMBOL_GPL(regulator_bulk_free);
+
+/**
+ * regulator_notifier_call_chain - call regulator event notifier
+ * @regulator: regulator source
+ * @event: notifier block
+ * @data:
+ *
+ * Called by regulator drivers to notify clients a regulator event has
+ * occurred. We also notify regulator clients downstream.
+ */
+int regulator_notifier_call_chain(struct regulator_dev *rdev,
+				  unsigned long event, void *data)
+{
+	_notifier_call_chain(rdev, event, data);
+	return NOTIFY_DONE;
+
+}
+EXPORT_SYMBOL_GPL(regulator_notifier_call_chain);
+
+/**
+ * regulator_register - register regulator
+ * @regulator: regulator source
+ * @reg_data: private regulator data
+ *
+ * Called by regulator drivers to register a regulator.
+ * Returns 0 on success.
+ */
+struct regulator_dev *regulator_register(struct regulator_desc *regulator_desc,
+					  void *reg_data)
+{
+	static atomic_t regulator_no = ATOMIC_INIT(0);
+	struct regulator_dev *rdev;
+	int ret;
+
+	if (regulator_desc == NULL)
+		return ERR_PTR(-EINVAL);
+
+	if (regulator_desc->name == NULL || regulator_desc->ops == NULL)
+		return ERR_PTR(-EINVAL);
+
+	if (!regulator_desc->type == REGULATOR_VOLTAGE &&
+	    !regulator_desc->type == REGULATOR_CURRENT)
+		return ERR_PTR(-EINVAL);
+
+	rdev = kzalloc(sizeof(struct regulator_dev), GFP_KERNEL);
+	if (rdev == NULL)
+		return ERR_PTR(-ENOMEM);
+
+	mutex_lock(&regulator_list_mutex);
+
+	mutex_init(&rdev->mutex);
+	rdev->reg_data = reg_data;
+	rdev->owner = regulator_desc->owner;
+	rdev->desc = regulator_desc;
+	INIT_LIST_HEAD(&rdev->consumer_list);
+	INIT_LIST_HEAD(&rdev->supply_list);
+	INIT_LIST_HEAD(&rdev->list);
+	INIT_LIST_HEAD(&rdev->slist);
+	BLOCKING_INIT_NOTIFIER_HEAD(&rdev->notifier);
+
+	rdev->dev.class = &regulator_class;
+	device_initialize(&rdev->dev);
+	snprintf(rdev->dev.bus_id, sizeof(rdev->dev.bus_id),
+		 "regulator_%ld_%s",
+		 (unsigned long)atomic_inc_return(&regulator_no) - 1,
+		 regulator_desc->name);
+
+	ret = device_add(&rdev->dev);
+	if (ret == 0)
+		list_add(&rdev->list, &regulator_list);
+	else {
+		kfree(rdev);
+		rdev = ERR_PTR(ret);
+	}
+	mutex_unlock(&regulator_list_mutex);
+	return rdev;
+}
+EXPORT_SYMBOL_GPL(regulator_register);
+
+/**
+ * regulator_unregister - unregister regulator
+ * @regulator: regulator source
+ *
+ * Called by regulator drivers to unregister a regulator.
+ */
+void regulator_unregister(struct regulator_dev *rdev)
+{
+	if (rdev == NULL)
+		return;
+
+	mutex_lock(&regulator_list_mutex);
+	list_del(&rdev->list);
+	if (rdev->supply)
+		sysfs_remove_link(&rdev->dev.kobj, "supply");
+	device_unregister(&rdev->dev);
+	mutex_unlock(&regulator_list_mutex);
+}
+EXPORT_SYMBOL_GPL(regulator_unregister);
+
+/**
+ * regulator_set_supply - set regulator supply regulator
+ * @regulator: regulator name
+ * @supply: supply regulator name
+ *
+ * Called by platform initialisation code to set the supply regulator for this
+ * regulator. This ensures that a regulators supply will also be enabled by the
+ * core if it's child is enabled.
+ */
+int regulator_set_supply(const char *regulator, const char *supply)
+{
+	struct regulator_dev *rdev, *supply_rdev;
+	int err;
+
+	if (regulator == NULL || supply == NULL)
+		return -EINVAL;
+
+	mutex_lock(&regulator_list_mutex);
+
+	list_for_each_entry(rdev, &regulator_list, list) {
+		if (!strcmp(rdev->desc->name, regulator))
+			goto found_regulator;
+	}
+	mutex_unlock(&regulator_list_mutex);
+	return -ENODEV;
+
+found_regulator:
+	list_for_each_entry(supply_rdev, &regulator_list, list) {
+		if (!strcmp(supply_rdev->desc->name, supply))
+			goto found_supply;
+	}
+	mutex_unlock(&regulator_list_mutex);
+	return -ENODEV;
+
+found_supply:
+	err = sysfs_create_link(&rdev->dev.kobj, &supply_rdev->dev.kobj,
+				"supply");
+	if (err) {
+		printk(KERN_ERR
+		       "%s: could not add device link %s err %d\n",
+		       __func__, supply_rdev->dev.kobj.name, err);
+		       goto out;
+	}
+	rdev->supply = supply_rdev;
+	list_add(&rdev->slist, &supply_rdev->supply_list);
+out:
+	mutex_unlock(&regulator_list_mutex);
+	return err;
+}
+EXPORT_SYMBOL_GPL(regulator_set_supply);
+
+/**
+ * regulator_get_supply - get regulator supply regulator
+ * @regulator: regulator name
+ *
+ * Returns the supply supply regulator name or NULL if no supply regulator
+ * exists (i.e the regulator is supplied directly from USB, Line, Battery, etc)
+ */
+const char *regulator_get_supply(const char *regulator)
+{
+	struct regulator_dev *rdev;
+
+	if (regulator == NULL)
+		return NULL;
+
+	mutex_lock(&regulator_list_mutex);
+	list_for_each_entry(rdev, &regulator_list, list) {
+		if (!strcmp(rdev->desc->name, regulator))
+			goto found;
+	}
+	mutex_unlock(&regulator_list_mutex);
+	return NULL;
+
+found:
+	mutex_unlock(&regulator_list_mutex);
+	if (rdev->supply)
+		return rdev->supply->desc->name;
+	else
+		return NULL;
+}
+EXPORT_SYMBOL_GPL(regulator_get_supply);
+
+/**
+ * regulator_set_machine_constraints - sets regulator constraints
+ * @regulator: regulator source
+ *
+ * Allows platform initialisation code to define and constrain
+ * regulator circuits e.g. valid voltage/current ranges, etc.  NOTE:
+ * Constraints *must* be set by platform code in order for some
+ * regulator operations to proceed i.e. set_voltage, set_current_limit,
+ * set_mode.
+ */
+int regulator_set_machine_constraints(const char *regulator_name,
+	struct regulation_constraints *constraints)
+{
+	struct regulator_dev *rdev;
+	int ret = 0;
+
+	if (regulator_name == NULL)
+		return -EINVAL;
+
+	mutex_lock(&regulator_list_mutex);
+
+	list_for_each_entry(rdev, &regulator_list, list) {
+		if (!strcmp(regulator_name, rdev->desc->name))
+			goto found;
+	}
+	ret = -ENODEV;
+	goto out;
+
+found:
+	mutex_lock(&rdev->mutex);
+	rdev->constraints = constraints;
+
+	/* do we need to apply the constraint voltage */
+	if (rdev->constraints->apply_uV &&
+		rdev->constraints->min_uV == rdev->constraints->max_uV &&
+		rdev->desc->ops->set_voltage) {
+		ret = rdev->desc->ops->set_voltage(rdev,
+			rdev->constraints->min_uV, rdev->constraints->max_uV);
+			if (ret < 0) {
+				printk(KERN_ERR "%s: failed to apply %duV"
+					" constraint\n", __func__,
+					rdev->constraints->min_uV);
+				rdev->constraints = NULL;
+				goto out;
+			}
+	}
+
+	/* are we enabled at boot time by firmware / bootloader */
+	if (rdev->constraints->boot_on)
+		rdev->use_count = 1;
+
+	/* do we need to setup our suspend state */
+	if (constraints->initial_state)
+		ret = suspend_prepare(rdev, constraints->initial_state);
+
+	print_constraints(rdev);
+	mutex_unlock(&rdev->mutex);
+
+out:
+	mutex_unlock(&regulator_list_mutex);
+	return ret;
+}
+EXPORT_SYMBOL_GPL(regulator_set_machine_constraints);
+
+
+/**
+ * regulator_set_device_supply: Bind a regulator to a symbolic supply
+ * @regulator: regulator source
+ * @dev:       device the supply applies to
+ * @supply:    symbolic name for supply
+ *
+ * Allows platform initialisation code to map physical regulator
+ * sources to symbolic names for supplies for use by devices.  Devices
+ * should use these symbolic names to request regulators, avoiding the
+ * need to provide board-specific regulator names as platform data.
+ */
+int regulator_set_device_supply(const char *regulator, struct device *dev,
+				const char *supply)
+{
+	struct regulator_map *node;
+
+	if (regulator == NULL || supply == NULL)
+		return -EINVAL;
+
+	node = kmalloc(sizeof(struct regulator_map), GFP_KERNEL);
+	if (node == NULL)
+		return -ENOMEM;
+
+	node->regulator = regulator;
+	node->dev = dev;
+	node->supply = supply;
+
+	mutex_lock(&regulator_list_mutex);
+	list_add(&node->list, &regulator_map_list);
+	mutex_unlock(&regulator_list_mutex);
+	return 0;
+}
+EXPORT_SYMBOL_GPL(regulator_set_device_supply);
+
+/**
+ * regulator_suspend_prepare: prepare regulators for system wide suspend
+ * @state: system suspend state
+ *
+ * Configure each regulator with it's suspend operating parameters for state.
+ * This will usually be called by machine suspend code prior to supending.
+ */
+int regulator_suspend_prepare(suspend_state_t state)
+{
+	struct regulator_dev *rdev;
+	int ret = 0;
+
+	/* ON is handled by regulator active state */
+	if (state == PM_SUSPEND_ON)
+		return -EINVAL;
+
+	mutex_lock(&regulator_list_mutex);
+	list_for_each_entry(rdev, &regulator_list, list) {
+
+		mutex_lock(&rdev->mutex);
+		ret = suspend_prepare(rdev, state);
+		mutex_unlock(&rdev->mutex);
+
+		if (ret < 0) {
+			printk(KERN_ERR "%s: failed to prepare %s\n",
+				__func__, rdev->desc->name);
+			goto out;
+		}
+	}
+out:
+	mutex_unlock(&regulator_list_mutex);
+	return ret;
+}
+EXPORT_SYMBOL_GPL(regulator_suspend_prepare);
+
+/**
+ * rdev_get_drvdata - get rdev regulator driver data
+ * @regulator: regulator
+ *
+ * Get rdev regulator driver private data. This call can be used in the
+ * regulator driver context.
+ */
+void *rdev_get_drvdata(struct regulator_dev *rdev)
+{
+	return rdev->reg_data;
+}
+EXPORT_SYMBOL_GPL(rdev_get_drvdata);
+
+/**
+ * regulator_get_drvdata - get regulator driver data
+ * @regulator: regulator
+ *
+ * Get regulator driver private data. This call can be used in the consumer
+ * driver context when non API regulator specific functions need to be called.
+ */
+void *regulator_get_drvdata(struct regulator *regulator)
+{
+	return regulator->rdev->reg_data;
+}
+EXPORT_SYMBOL_GPL(regulator_get_drvdata);
+
+/**
+ * regulator_set_drvdata - set regulator driver data
+ * @regulator: regulator
+ * @data: data
+ */
+void regulator_set_drvdata(struct regulator *regulator, void *data)
+{
+	regulator->rdev->reg_data = data;
+}
+EXPORT_SYMBOL_GPL(regulator_set_drvdata);
+
+/**
+ * regulator_get_id - get regulator ID
+ * @regulator: regulator
+ */
+int rdev_get_id(struct regulator_dev *rdev)
+{
+	return rdev->desc->id;
+}
+EXPORT_SYMBOL_GPL(rdev_get_id);
+
+static int __init regulator_init(void)
+{
+	printk(KERN_INFO "regulator: core version %s\n", REGULATOR_VERSION);
+	return class_register(&regulator_class);
+}
+
+/* init early to allow our consumers to complete system booting */
+core_initcall(regulator_init);
diff --git a/drivers/regulator/fixed.c b/drivers/regulator/fixed.c
new file mode 100644
index 000000000000..d31db3e14913
--- /dev/null
+++ b/drivers/regulator/fixed.c
@@ -0,0 +1,129 @@
+/*
+ * fixed.c
+ *
+ * Copyright 2008 Wolfson Microelectronics PLC.
+ *
+ * Author: Mark Brown <broonie@opensource.wolfsonmicro.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This is useful for systems with mixed controllable and
+ * non-controllable regulators, as well as for allowing testing on
+ * systems with no controllable regulators.
+ */
+
+#include <linux/err.h>
+#include <linux/mutex.h>
+#include <linux/platform_device.h>
+#include <linux/regulator/driver.h>
+#include <linux/regulator/fixed.h>
+
+struct fixed_voltage_data {
+	struct regulator_desc desc;
+	struct regulator_dev *dev;
+	int microvolts;
+};
+
+static int fixed_voltage_is_enabled(struct regulator_dev *dev)
+{
+	return 1;
+}
+
+static int fixed_voltage_enable(struct regulator_dev *dev)
+{
+	return 0;
+}
+
+static int fixed_voltage_get_voltage(struct regulator_dev *dev)
+{
+	struct fixed_voltage_data *data = rdev_get_drvdata(dev);
+
+	return data->microvolts;
+}
+
+static struct regulator_ops fixed_voltage_ops = {
+	.is_enabled = fixed_voltage_is_enabled,
+	.enable = fixed_voltage_enable,
+	.get_voltage = fixed_voltage_get_voltage,
+};
+
+static int regulator_fixed_voltage_probe(struct platform_device *pdev)
+{
+	struct fixed_voltage_config *config = pdev->dev.platform_data;
+	struct fixed_voltage_data *drvdata;
+	int ret;
+
+	drvdata = kzalloc(sizeof(struct fixed_voltage_data), GFP_KERNEL);
+	if (drvdata == NULL) {
+		ret = -ENOMEM;
+		goto err;
+	}
+
+	drvdata->desc.name = kstrdup(config->supply_name, GFP_KERNEL);
+	if (drvdata->desc.name == NULL) {
+		ret = -ENOMEM;
+		goto err;
+	}
+	drvdata->desc.type = REGULATOR_VOLTAGE;
+	drvdata->desc.owner = THIS_MODULE;
+	drvdata->desc.ops = &fixed_voltage_ops,
+
+	drvdata->microvolts = config->microvolts;
+
+	drvdata->dev = regulator_register(&drvdata->desc, drvdata);
+	if (IS_ERR(drvdata->dev)) {
+		ret = PTR_ERR(drvdata->dev);
+		goto err_name;
+	}
+
+	platform_set_drvdata(pdev, drvdata);
+
+	dev_dbg(&pdev->dev, "%s supplying %duV\n", drvdata->desc.name,
+		drvdata->microvolts);
+
+	return 0;
+
+err_name:
+	kfree(drvdata->desc.name);
+err:
+	kfree(drvdata);
+	return ret;
+}
+
+static int regulator_fixed_voltage_remove(struct platform_device *pdev)
+{
+	struct fixed_voltage_data *drvdata = platform_get_drvdata(pdev);
+
+	regulator_unregister(drvdata->dev);
+	kfree(drvdata->desc.name);
+	kfree(drvdata);
+
+	return 0;
+}
+
+static struct platform_driver regulator_fixed_voltage_driver = {
+	.probe		= regulator_fixed_voltage_probe,
+	.remove		= regulator_fixed_voltage_remove,
+	.driver		= {
+		.name		= "reg-fixed-voltage",
+	},
+};
+
+static int __init regulator_fixed_voltage_init(void)
+{
+	return platform_driver_register(&regulator_fixed_voltage_driver);
+}
+module_init(regulator_fixed_voltage_init);
+
+static void __exit regulator_fixed_voltage_exit(void)
+{
+	platform_driver_unregister(&regulator_fixed_voltage_driver);
+}
+module_exit(regulator_fixed_voltage_exit);
+
+MODULE_AUTHOR("Mark Brown <broonie@opensource.wolfsonmicro.com>");
+MODULE_DESCRIPTION("Fixed voltage regulator");
+MODULE_LICENSE("GPL");
diff --git a/drivers/regulator/virtual.c b/drivers/regulator/virtual.c
new file mode 100644
index 000000000000..5ddb464b1c3f
--- /dev/null
+++ b/drivers/regulator/virtual.c
@@ -0,0 +1,345 @@
+/*
+ * reg-virtual-consumer.c
+ *
+ * Copyright 2008 Wolfson Microelectronics PLC.
+ *
+ * Author: Mark Brown <broonie@opensource.wolfsonmicro.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ */
+
+#include <linux/err.h>
+#include <linux/mutex.h>
+#include <linux/platform_device.h>
+#include <linux/regulator/consumer.h>
+
+struct virtual_consumer_data {
+	struct mutex lock;
+	struct regulator *regulator;
+	int enabled;
+	int min_uV;
+	int max_uV;
+	int min_uA;
+	int max_uA;
+	unsigned int mode;
+};
+
+static void update_voltage_constraints(struct virtual_consumer_data *data)
+{
+	int ret;
+
+	if (data->min_uV && data->max_uV
+	    && data->min_uV <= data->max_uV) {
+		ret = regulator_set_voltage(data->regulator,
+					    data->min_uV, data->max_uV);
+		if (ret != 0) {
+			printk(KERN_ERR "regulator_set_voltage() failed: %d\n",
+			       ret);
+			return;
+		}
+	}
+
+	if (data->min_uV && data->max_uV && !data->enabled) {
+		ret = regulator_enable(data->regulator);
+		if (ret == 0)
+			data->enabled = 1;
+		else
+			printk(KERN_ERR "regulator_enable() failed: %d\n",
+				ret);
+	}
+
+	if (!(data->min_uV && data->max_uV) && data->enabled) {
+		ret = regulator_disable(data->regulator);
+		if (ret == 0)
+			data->enabled = 0;
+		else
+			printk(KERN_ERR "regulator_disable() failed: %d\n",
+				ret);
+	}
+}
+
+static void update_current_limit_constraints(struct virtual_consumer_data
+						*data)
+{
+	int ret;
+
+	if (data->max_uA
+	    && data->min_uA <= data->max_uA) {
+		ret = regulator_set_current_limit(data->regulator,
+					data->min_uA, data->max_uA);
+		if (ret != 0) {
+			pr_err("regulator_set_current_limit() failed: %d\n",
+			       ret);
+			return;
+		}
+	}
+
+	if (data->max_uA && !data->enabled) {
+		ret = regulator_enable(data->regulator);
+		if (ret == 0)
+			data->enabled = 1;
+		else
+			printk(KERN_ERR "regulator_enable() failed: %d\n",
+				ret);
+	}
+
+	if (!(data->min_uA && data->max_uA) && data->enabled) {
+		ret = regulator_disable(data->regulator);
+		if (ret == 0)
+			data->enabled = 0;
+		else
+			printk(KERN_ERR "regulator_disable() failed: %d\n",
+				ret);
+	}
+}
+
+static ssize_t show_min_uV(struct device *dev,
+			   struct device_attribute *attr, char *buf)
+{
+	struct virtual_consumer_data *data = dev_get_drvdata(dev);
+	return sprintf(buf, "%d\n", data->min_uV);
+}
+
+static ssize_t set_min_uV(struct device *dev, struct device_attribute *attr,
+			  const char *buf, size_t count)
+{
+	struct virtual_consumer_data *data = dev_get_drvdata(dev);
+	long val;
+
+	if (strict_strtol(buf, 10, &val) != 0)
+		return count;
+
+	mutex_lock(&data->lock);
+
+	data->min_uV = val;
+	update_voltage_constraints(data);
+
+	mutex_unlock(&data->lock);
+
+	return count;
+}
+
+static ssize_t show_max_uV(struct device *dev,
+			   struct device_attribute *attr, char *buf)
+{
+	struct virtual_consumer_data *data = dev_get_drvdata(dev);
+	return sprintf(buf, "%d\n", data->max_uV);
+}
+
+static ssize_t set_max_uV(struct device *dev, struct device_attribute *attr,
+			  const char *buf, size_t count)
+{
+	struct virtual_consumer_data *data = dev_get_drvdata(dev);
+	long val;
+
+	if (strict_strtol(buf, 10, &val) != 0)
+		return count;
+
+	mutex_lock(&data->lock);
+
+	data->max_uV = val;
+	update_voltage_constraints(data);
+
+	mutex_unlock(&data->lock);
+
+	return count;
+}
+
+static ssize_t show_min_uA(struct device *dev,
+			   struct device_attribute *attr, char *buf)
+{
+	struct virtual_consumer_data *data = dev_get_drvdata(dev);
+	return sprintf(buf, "%d\n", data->min_uA);
+}
+
+static ssize_t set_min_uA(struct device *dev, struct device_attribute *attr,
+			  const char *buf, size_t count)
+{
+	struct virtual_consumer_data *data = dev_get_drvdata(dev);
+	long val;
+
+	if (strict_strtol(buf, 10, &val) != 0)
+		return count;
+
+	mutex_lock(&data->lock);
+
+	data->min_uA = val;
+	update_current_limit_constraints(data);
+
+	mutex_unlock(&data->lock);
+
+	return count;
+}
+
+static ssize_t show_max_uA(struct device *dev,
+			   struct device_attribute *attr, char *buf)
+{
+	struct virtual_consumer_data *data = dev_get_drvdata(dev);
+	return sprintf(buf, "%d\n", data->max_uA);
+}
+
+static ssize_t set_max_uA(struct device *dev, struct device_attribute *attr,
+			  const char *buf, size_t count)
+{
+	struct virtual_consumer_data *data = dev_get_drvdata(dev);
+	long val;
+
+	if (strict_strtol(buf, 10, &val) != 0)
+		return count;
+
+	mutex_lock(&data->lock);
+
+	data->max_uA = val;
+	update_current_limit_constraints(data);
+
+	mutex_unlock(&data->lock);
+
+	return count;
+}
+
+static ssize_t show_mode(struct device *dev,
+			 struct device_attribute *attr, char *buf)
+{
+	struct virtual_consumer_data *data = dev_get_drvdata(dev);
+
+	switch (data->mode) {
+	case REGULATOR_MODE_FAST:
+		return sprintf(buf, "fast\n");
+	case REGULATOR_MODE_NORMAL:
+		return sprintf(buf, "normal\n");
+	case REGULATOR_MODE_IDLE:
+		return sprintf(buf, "idle\n");
+	case REGULATOR_MODE_STANDBY:
+		return sprintf(buf, "standby\n");
+	default:
+		return sprintf(buf, "unknown\n");
+	}
+}
+
+static ssize_t set_mode(struct device *dev, struct device_attribute *attr,
+			const char *buf, size_t count)
+{
+	struct virtual_consumer_data *data = dev_get_drvdata(dev);
+	unsigned int mode;
+	int ret;
+
+	if (strncmp(buf, "fast", strlen("fast")) == 0)
+		mode = REGULATOR_MODE_FAST;
+	else if (strncmp(buf, "normal", strlen("normal")) == 0)
+		mode = REGULATOR_MODE_NORMAL;
+	else if (strncmp(buf, "idle", strlen("idle")) == 0)
+		mode = REGULATOR_MODE_IDLE;
+	else if (strncmp(buf, "standby", strlen("standby")) == 0)
+		mode = REGULATOR_MODE_STANDBY;
+	else {
+		dev_err(dev, "Configuring invalid mode\n");
+		return count;
+	}
+
+	mutex_lock(&data->lock);
+	ret = regulator_set_mode(data->regulator, mode);
+	if (ret == 0)
+		data->mode = mode;
+	else
+		dev_err(dev, "Failed to configure mode: %d\n", ret);
+	mutex_unlock(&data->lock);
+
+	return count;
+}
+
+static DEVICE_ATTR(min_microvolts, 0666, show_min_uV, set_min_uV);
+static DEVICE_ATTR(max_microvolts, 0666, show_max_uV, set_max_uV);
+static DEVICE_ATTR(min_microamps, 0666, show_min_uA, set_min_uA);
+static DEVICE_ATTR(max_microamps, 0666, show_max_uA, set_max_uA);
+static DEVICE_ATTR(mode, 0666, show_mode, set_mode);
+
+struct device_attribute *attributes[] = {
+	&dev_attr_min_microvolts,
+	&dev_attr_max_microvolts,
+	&dev_attr_min_microamps,
+	&dev_attr_max_microamps,
+	&dev_attr_mode,
+};
+
+static int regulator_virtual_consumer_probe(struct platform_device *pdev)
+{
+	char *reg_id = pdev->dev.platform_data;
+	struct virtual_consumer_data *drvdata;
+	int ret, i;
+
+	drvdata = kzalloc(sizeof(struct virtual_consumer_data), GFP_KERNEL);
+	if (drvdata == NULL) {
+		ret = -ENOMEM;
+		goto err;
+	}
+
+	mutex_init(&drvdata->lock);
+
+	drvdata->regulator = regulator_get(&pdev->dev, reg_id);
+	if (IS_ERR(drvdata->regulator)) {
+		ret = PTR_ERR(drvdata->regulator);
+		goto err;
+	}
+
+	for (i = 0; i < ARRAY_SIZE(attributes); i++) {
+		ret = device_create_file(&pdev->dev, attributes[i]);
+		if (ret != 0)
+			goto err;
+	}
+
+	drvdata->mode = regulator_get_mode(drvdata->regulator);
+
+	platform_set_drvdata(pdev, drvdata);
+
+	return 0;
+
+err:
+	for (i = 0; i < ARRAY_SIZE(attributes); i++)
+		device_remove_file(&pdev->dev, attributes[i]);
+	kfree(drvdata);
+	return ret;
+}
+
+static int regulator_virtual_consumer_remove(struct platform_device *pdev)
+{
+	struct virtual_consumer_data *drvdata = platform_get_drvdata(pdev);
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(attributes); i++)
+		device_remove_file(&pdev->dev, attributes[i]);
+	if (drvdata->enabled)
+		regulator_disable(drvdata->regulator);
+	regulator_put(drvdata->regulator);
+
+	kfree(drvdata);
+
+	return 0;
+}
+
+static struct platform_driver regulator_virtual_consumer_driver = {
+	.probe		= regulator_virtual_consumer_probe,
+	.remove		= regulator_virtual_consumer_remove,
+	.driver		= {
+		.name		= "reg-virt-consumer",
+	},
+};
+
+
+static int __init regulator_virtual_consumer_init(void)
+{
+	return platform_driver_register(&regulator_virtual_consumer_driver);
+}
+module_init(regulator_virtual_consumer_init);
+
+static void __exit regulator_virtual_consumer_exit(void)
+{
+	platform_driver_unregister(&regulator_virtual_consumer_driver);
+}
+module_exit(regulator_virtual_consumer_exit);
+
+MODULE_AUTHOR("Mark Brown <broonie@opensource.wolfsonmicro.com>");
+MODULE_DESCRIPTION("Virtual regulator consumer");
+MODULE_LICENSE("GPL");
diff --git a/drivers/rtc/Kconfig b/drivers/rtc/Kconfig
index 90ab73825401..9a9755c92fad 100644
--- a/drivers/rtc/Kconfig
+++ b/drivers/rtc/Kconfig
@@ -561,7 +561,7 @@ config RTC_DRV_AT91SAM9_GPBR
 
 config RTC_DRV_BFIN
 	tristate "Blackfin On-Chip RTC"
-	depends on BLACKFIN
+	depends on BLACKFIN && !BF561
 	help
 	  If you say yes here you will get support for the
 	  Blackfin On-Chip Real Time Clock.
diff --git a/drivers/rtc/interface.c b/drivers/rtc/interface.c
index d397fa5f3a91..7af60b98d8a4 100644
--- a/drivers/rtc/interface.c
+++ b/drivers/rtc/interface.c
@@ -20,7 +20,7 @@ int rtc_read_time(struct rtc_device *rtc, struct rtc_time *tm)
 
 	err = mutex_lock_interruptible(&rtc->ops_lock);
 	if (err)
-		return -EBUSY;
+		return err;
 
 	if (!rtc->ops)
 		err = -ENODEV;
@@ -46,7 +46,7 @@ int rtc_set_time(struct rtc_device *rtc, struct rtc_time *tm)
 
 	err = mutex_lock_interruptible(&rtc->ops_lock);
 	if (err)
-		return -EBUSY;
+		return err;
 
 	if (!rtc->ops)
 		err = -ENODEV;
@@ -66,7 +66,7 @@ int rtc_set_mmss(struct rtc_device *rtc, unsigned long secs)
 
 	err = mutex_lock_interruptible(&rtc->ops_lock);
 	if (err)
-		return -EBUSY;
+		return err;
 
 	if (!rtc->ops)
 		err = -ENODEV;
@@ -106,7 +106,7 @@ static int rtc_read_alarm_internal(struct rtc_device *rtc, struct rtc_wkalrm *al
 
 	err = mutex_lock_interruptible(&rtc->ops_lock);
 	if (err)
-		return -EBUSY;
+		return err;
 
 	if (rtc->ops == NULL)
 		err = -ENODEV;
@@ -293,7 +293,7 @@ int rtc_set_alarm(struct rtc_device *rtc, struct rtc_wkalrm *alarm)
 
 	err = mutex_lock_interruptible(&rtc->ops_lock);
 	if (err)
-		return -EBUSY;
+		return err;
 
 	if (!rtc->ops)
 		err = -ENODEV;
diff --git a/drivers/rtc/rtc-at91rm9200.c b/drivers/rtc/rtc-at91rm9200.c
index cd32d05db773..4e888cc8be5b 100644
--- a/drivers/rtc/rtc-at91rm9200.c
+++ b/drivers/rtc/rtc-at91rm9200.c
@@ -29,7 +29,7 @@
 #include <linux/completion.h>
 
 #include <asm/uaccess.h>
-#include <asm/arch/at91_rtc.h>
+#include <mach/at91_rtc.h>
 
 
 #define AT91_RTC_FREQ		1
diff --git a/drivers/rtc/rtc-at91sam9.c b/drivers/rtc/rtc-at91sam9.c
index f0246ef413a4..2133f37906f2 100644
--- a/drivers/rtc/rtc-at91sam9.c
+++ b/drivers/rtc/rtc-at91sam9.c
@@ -19,8 +19,8 @@
 #include <linux/interrupt.h>
 #include <linux/ioctl.h>
 
-#include <asm/arch/board.h>
-#include <asm/arch/at91_rtt.h>
+#include <mach/board.h>
+#include <mach/at91_rtt.h>
 
 
 /*
diff --git a/drivers/rtc/rtc-bfin.c b/drivers/rtc/rtc-bfin.c
index 8624f55d0560..34439ce3967e 100644
--- a/drivers/rtc/rtc-bfin.c
+++ b/drivers/rtc/rtc-bfin.c
@@ -2,7 +2,7 @@
  * Blackfin On-Chip Real Time Clock Driver
  *  Supports BF52[257]/BF53[123]/BF53[467]/BF54[24789]
  *
- * Copyright 2004-2007 Analog Devices Inc.
+ * Copyright 2004-2008 Analog Devices Inc.
  *
  * Enter bugs at http://blackfin.uclinux.org/
  *
@@ -32,6 +32,15 @@
  * writes to clear status registers complete immediately.
  */
 
+/* It may seem odd that there is no SWCNT code in here (which would be exposed
+ * via the periodic interrupt event, or PIE).  Since the Blackfin RTC peripheral
+ * runs in units of seconds (N/HZ) but the Linux framework runs in units of HZ
+ * (2^N HZ), there is no point in keeping code that only provides 1 HZ PIEs.
+ * The same exact behavior can be accomplished by using the update interrupt
+ * event (UIE).  Maybe down the line the RTC peripheral will suck less in which
+ * case we can re-introduce PIE support.
+ */
+
 #include <linux/bcd.h>
 #include <linux/completion.h>
 #include <linux/delay.h>
@@ -144,14 +153,13 @@ static void bfin_rtc_sync_pending(struct device *dev)
  * Initialize the RTC.  Enable pre-scaler to scale RTC clock
  * to 1Hz and clear interrupt/status registers.
  */
-static void bfin_rtc_reset(struct device *dev)
+static void bfin_rtc_reset(struct device *dev, u16 rtc_ictl)
 {
 	struct bfin_rtc *rtc = dev_get_drvdata(dev);
 	dev_dbg_stamp(dev);
 	bfin_rtc_sync_pending(dev);
 	bfin_write_RTC_PREN(0x1);
-	bfin_write_RTC_ICTL(RTC_ISTAT_WRITE_COMPLETE);
-	bfin_write_RTC_SWCNT(0);
+	bfin_write_RTC_ICTL(rtc_ictl);
 	bfin_write_RTC_ALARM(0);
 	bfin_write_RTC_ISTAT(0xFFFF);
 	rtc->rtc_wrote_regs = 0;
@@ -194,14 +202,6 @@ static irqreturn_t bfin_rtc_interrupt(int irq, void *dev_id)
 		}
 	}
 
-	if (rtc_ictl & RTC_ISTAT_STOPWATCH) {
-		if (rtc_istat & RTC_ISTAT_STOPWATCH) {
-			bfin_write_RTC_ISTAT(RTC_ISTAT_STOPWATCH);
-			events |= RTC_PF | RTC_IRQF;
-			bfin_write_RTC_SWCNT(rtc->rtc_dev->irq_freq);
-		}
-	}
-
 	if (rtc_ictl & RTC_ISTAT_SEC) {
 		if (rtc_istat & RTC_ISTAT_SEC) {
 			bfin_write_RTC_ISTAT(RTC_ISTAT_SEC);
@@ -218,32 +218,12 @@ static irqreturn_t bfin_rtc_interrupt(int irq, void *dev_id)
 		return IRQ_NONE;
 }
 
-static int bfin_rtc_open(struct device *dev)
-{
-	int ret;
-
-	dev_dbg_stamp(dev);
-
-	ret = request_irq(IRQ_RTC, bfin_rtc_interrupt, IRQF_SHARED, to_platform_device(dev)->name, dev);
-	if (!ret)
-		bfin_rtc_reset(dev);
-
-	return ret;
-}
-
-static void bfin_rtc_release(struct device *dev)
-{
-	dev_dbg_stamp(dev);
-	bfin_rtc_reset(dev);
-	free_irq(IRQ_RTC, dev);
-}
-
-static void bfin_rtc_int_set(struct bfin_rtc *rtc, u16 rtc_int)
+static void bfin_rtc_int_set(u16 rtc_int)
 {
 	bfin_write_RTC_ISTAT(rtc_int);
 	bfin_write_RTC_ICTL(bfin_read_RTC_ICTL() | rtc_int);
 }
-static void bfin_rtc_int_clear(struct bfin_rtc *rtc, u16 rtc_int)
+static void bfin_rtc_int_clear(u16 rtc_int)
 {
 	bfin_write_RTC_ICTL(bfin_read_RTC_ICTL() & rtc_int);
 }
@@ -252,7 +232,7 @@ static void bfin_rtc_int_set_alarm(struct bfin_rtc *rtc)
 	/* Blackfin has different bits for whether the alarm is
 	 * more than 24 hours away.
 	 */
-	bfin_rtc_int_set(rtc, (rtc->rtc_alarm.tm_yday == -1 ? RTC_ISTAT_ALARM : RTC_ISTAT_ALARM_DAY));
+	bfin_rtc_int_set(rtc->rtc_alarm.tm_yday == -1 ? RTC_ISTAT_ALARM : RTC_ISTAT_ALARM_DAY);
 }
 static int bfin_rtc_ioctl(struct device *dev, unsigned int cmd, unsigned long arg)
 {
@@ -264,23 +244,13 @@ static int bfin_rtc_ioctl(struct device *dev, unsigned int cmd, unsigned long ar
 	bfin_rtc_sync_pending(dev);
 
 	switch (cmd) {
-	case RTC_PIE_ON:
-		dev_dbg_stamp(dev);
-		bfin_rtc_int_set(rtc, RTC_ISTAT_STOPWATCH);
-		bfin_write_RTC_SWCNT(rtc->rtc_dev->irq_freq);
-		break;
-	case RTC_PIE_OFF:
-		dev_dbg_stamp(dev);
-		bfin_rtc_int_clear(rtc, ~RTC_ISTAT_STOPWATCH);
-		break;
-
 	case RTC_UIE_ON:
 		dev_dbg_stamp(dev);
-		bfin_rtc_int_set(rtc, RTC_ISTAT_SEC);
+		bfin_rtc_int_set(RTC_ISTAT_SEC);
 		break;
 	case RTC_UIE_OFF:
 		dev_dbg_stamp(dev);
-		bfin_rtc_int_clear(rtc, ~RTC_ISTAT_SEC);
+		bfin_rtc_int_clear(~RTC_ISTAT_SEC);
 		break;
 
 	case RTC_AIE_ON:
@@ -289,7 +259,7 @@ static int bfin_rtc_ioctl(struct device *dev, unsigned int cmd, unsigned long ar
 		break;
 	case RTC_AIE_OFF:
 		dev_dbg_stamp(dev);
-		bfin_rtc_int_clear(rtc, ~(RTC_ISTAT_ALARM | RTC_ISTAT_ALARM_DAY));
+		bfin_rtc_int_clear(~(RTC_ISTAT_ALARM | RTC_ISTAT_ALARM_DAY));
 		break;
 
 	default:
@@ -371,64 +341,64 @@ static int bfin_rtc_proc(struct device *dev, struct seq_file *seq)
 	seq_printf(seq,
 		"alarm_IRQ\t: %s\n"
 		"wkalarm_IRQ\t: %s\n"
-		"seconds_IRQ\t: %s\n"
-		"periodic_IRQ\t: %s\n",
+		"seconds_IRQ\t: %s\n",
 		yesno(ictl & RTC_ISTAT_ALARM),
 		yesno(ictl & RTC_ISTAT_ALARM_DAY),
-		yesno(ictl & RTC_ISTAT_SEC),
-		yesno(ictl & RTC_ISTAT_STOPWATCH));
+		yesno(ictl & RTC_ISTAT_SEC));
 	return 0;
 #undef yesno
 }
 
-/**
- *	bfin_irq_set_freq - make sure hardware supports requested freq
- *	@dev: pointer to RTC device structure
- *	@freq: requested frequency rate
- *
- *	The Blackfin RTC can only generate periodic events at 1 per
- *	second (1 Hz), so reject any attempt at changing it.
- */
-static int bfin_irq_set_freq(struct device *dev, int freq)
-{
-	dev_dbg_stamp(dev);
-	return -ENOTTY;
-}
-
 static struct rtc_class_ops bfin_rtc_ops = {
-	.open          = bfin_rtc_open,
-	.release       = bfin_rtc_release,
 	.ioctl         = bfin_rtc_ioctl,
 	.read_time     = bfin_rtc_read_time,
 	.set_time      = bfin_rtc_set_time,
 	.read_alarm    = bfin_rtc_read_alarm,
 	.set_alarm     = bfin_rtc_set_alarm,
 	.proc          = bfin_rtc_proc,
-	.irq_set_freq  = bfin_irq_set_freq,
 };
 
 static int __devinit bfin_rtc_probe(struct platform_device *pdev)
 {
 	struct bfin_rtc *rtc;
+	struct device *dev = &pdev->dev;
 	int ret = 0;
+	unsigned long timeout;
 
-	dev_dbg_stamp(&pdev->dev);
+	dev_dbg_stamp(dev);
 
+	/* Allocate memory for our RTC struct */
 	rtc = kzalloc(sizeof(*rtc), GFP_KERNEL);
 	if (unlikely(!rtc))
 		return -ENOMEM;
+	platform_set_drvdata(pdev, rtc);
+	device_init_wakeup(dev, 1);
 
-	rtc->rtc_dev = rtc_device_register(pdev->name, &pdev->dev, &bfin_rtc_ops, THIS_MODULE);
-	if (IS_ERR(rtc)) {
-		ret = PTR_ERR(rtc->rtc_dev);
+	/* Grab the IRQ and init the hardware */
+	ret = request_irq(IRQ_RTC, bfin_rtc_interrupt, IRQF_SHARED, pdev->name, dev);
+	if (unlikely(ret))
 		goto err;
-	}
-	rtc->rtc_dev->irq_freq = 1;
+	/* sometimes the bootloader touched things, but the write complete was not
+	 * enabled, so let's just do a quick timeout here since the IRQ will not fire ...
+	 */
+	timeout = jiffies + HZ;
+	while (bfin_read_RTC_ISTAT() & RTC_ISTAT_WRITE_PENDING)
+		if (time_after(jiffies, timeout))
+			break;
+	bfin_rtc_reset(dev, RTC_ISTAT_WRITE_COMPLETE);
+	bfin_write_RTC_SWCNT(0);
 
-	platform_set_drvdata(pdev, rtc);
+	/* Register our RTC with the RTC framework */
+	rtc->rtc_dev = rtc_device_register(pdev->name, dev, &bfin_rtc_ops, THIS_MODULE);
+	if (unlikely(IS_ERR(rtc))) {
+		ret = PTR_ERR(rtc->rtc_dev);
+		goto err_irq;
+	}
 
 	return 0;
 
+ err_irq:
+	free_irq(IRQ_RTC, dev);
  err:
 	kfree(rtc);
 	return ret;
@@ -437,7 +407,10 @@ static int __devinit bfin_rtc_probe(struct platform_device *pdev)
 static int __devexit bfin_rtc_remove(struct platform_device *pdev)
 {
 	struct bfin_rtc *rtc = platform_get_drvdata(pdev);
+	struct device *dev = &pdev->dev;
 
+	bfin_rtc_reset(dev, 0);
+	free_irq(IRQ_RTC, dev);
 	rtc_device_unregister(rtc->rtc_dev);
 	platform_set_drvdata(pdev, NULL);
 	kfree(rtc);
@@ -445,6 +418,32 @@ static int __devexit bfin_rtc_remove(struct platform_device *pdev)
 	return 0;
 }
 
+#ifdef CONFIG_PM
+static int bfin_rtc_suspend(struct platform_device *pdev, pm_message_t state)
+{
+	if (device_may_wakeup(&pdev->dev)) {
+		enable_irq_wake(IRQ_RTC);
+		bfin_rtc_sync_pending(&pdev->dev);
+	} else
+		bfin_rtc_int_clear(-1);
+
+	return 0;
+}
+
+static int bfin_rtc_resume(struct platform_device *pdev)
+{
+	if (device_may_wakeup(&pdev->dev))
+		disable_irq_wake(IRQ_RTC);
+	else
+		bfin_write_RTC_ISTAT(-1);
+
+	return 0;
+}
+#else
+# define bfin_rtc_suspend NULL
+# define bfin_rtc_resume  NULL
+#endif
+
 static struct platform_driver bfin_rtc_driver = {
 	.driver		= {
 		.name	= "rtc-bfin",
@@ -452,6 +451,8 @@ static struct platform_driver bfin_rtc_driver = {
 	},
 	.probe		= bfin_rtc_probe,
 	.remove		= __devexit_p(bfin_rtc_remove),
+	.suspend	= bfin_rtc_suspend,
+	.resume		= bfin_rtc_resume,
 };
 
 static int __init bfin_rtc_init(void)
diff --git a/drivers/rtc/rtc-cmos.c b/drivers/rtc/rtc-cmos.c
index 6ea349aba3ba..b184367637d0 100644
--- a/drivers/rtc/rtc-cmos.c
+++ b/drivers/rtc/rtc-cmos.c
@@ -800,7 +800,6 @@ static void __exit cmos_do_remove(struct device *dev)
 static int cmos_suspend(struct device *dev, pm_message_t mesg)
 {
 	struct cmos_rtc	*cmos = dev_get_drvdata(dev);
-	int		do_wake = device_may_wakeup(dev);
 	unsigned char	tmp;
 
 	/* only the alarm might be a wakeup event source */
@@ -809,7 +808,7 @@ static int cmos_suspend(struct device *dev, pm_message_t mesg)
 	if (tmp & (RTC_PIE|RTC_AIE|RTC_UIE)) {
 		unsigned char	mask;
 
-		if (do_wake)
+		if (device_may_wakeup(dev))
 			mask = RTC_IRQMASK & ~RTC_AIE;
 		else
 			mask = RTC_IRQMASK;
@@ -837,6 +836,17 @@ static int cmos_suspend(struct device *dev, pm_message_t mesg)
 	return 0;
 }
 
+/* We want RTC alarms to wake us from e.g. ACPI G2/S5 "soft off", even
+ * after a detour through G3 "mechanical off", although the ACPI spec
+ * says wakeup should only work from G1/S4 "hibernate".  To most users,
+ * distinctions between S4 and S5 are pointless.  So when the hardware
+ * allows, don't draw that distinction.
+ */
+static inline int cmos_poweroff(struct device *dev)
+{
+	return cmos_suspend(dev, PMSG_HIBERNATE);
+}
+
 static int cmos_resume(struct device *dev)
 {
 	struct cmos_rtc	*cmos = dev_get_drvdata(dev);
@@ -884,6 +894,12 @@ static int cmos_resume(struct device *dev)
 #else
 #define	cmos_suspend	NULL
 #define	cmos_resume	NULL
+
+static inline int cmos_poweroff(struct device *dev)
+{
+	return -ENOSYS;
+}
+
 #endif
 
 /*----------------------------------------------------------------*/
@@ -903,10 +919,6 @@ static int cmos_resume(struct device *dev)
 static int __devinit
 cmos_pnp_probe(struct pnp_dev *pnp, const struct pnp_device_id *id)
 {
-	/* REVISIT paranoia argues for a shutdown notifier, since PNP
-	 * drivers can't provide shutdown() methods to disable IRQs.
-	 * Or better yet, fix PNP to allow those methods...
-	 */
 	if (pnp_port_start(pnp,0) == 0x70 && !pnp_irq_valid(pnp,0))
 		/* Some machines contain a PNP entry for the RTC, but
 		 * don't define the IRQ. It should always be safe to
@@ -942,6 +954,13 @@ static int cmos_pnp_resume(struct pnp_dev *pnp)
 #define	cmos_pnp_resume		NULL
 #endif
 
+static void cmos_pnp_shutdown(struct device *pdev)
+{
+	if (system_state == SYSTEM_POWER_OFF && !cmos_poweroff(pdev))
+		return;
+
+	cmos_do_shutdown();
+}
 
 static const struct pnp_device_id rtc_ids[] = {
 	{ .id = "PNP0b00", },
@@ -961,6 +980,10 @@ static struct pnp_driver cmos_pnp_driver = {
 	.flags		= PNP_DRIVER_RES_DO_NOT_CHANGE,
 	.suspend	= cmos_pnp_suspend,
 	.resume		= cmos_pnp_resume,
+	.driver		= {
+		.name	  = (char *)driver_name,
+		.shutdown = cmos_pnp_shutdown,
+	}
 };
 
 #endif	/* CONFIG_PNP */
@@ -986,6 +1009,9 @@ static int __exit cmos_platform_remove(struct platform_device *pdev)
 
 static void cmos_platform_shutdown(struct platform_device *pdev)
 {
+	if (system_state == SYSTEM_POWER_OFF && !cmos_poweroff(&pdev->dev))
+		return;
+
 	cmos_do_shutdown();
 }
 
diff --git a/drivers/rtc/rtc-dev.c b/drivers/rtc/rtc-dev.c
index 0a870b7e5c32..f118252f3a9f 100644
--- a/drivers/rtc/rtc-dev.c
+++ b/drivers/rtc/rtc-dev.c
@@ -13,7 +13,6 @@
 
 #include <linux/module.h>
 #include <linux/rtc.h>
-#include <linux/smp_lock.h>
 #include "rtc-core.h"
 
 static dev_t rtc_devt;
@@ -27,11 +26,8 @@ static int rtc_dev_open(struct inode *inode, struct file *file)
 					struct rtc_device, char_dev);
 	const struct rtc_class_ops *ops = rtc->ops;
 
-	lock_kernel();
-	if (test_and_set_bit_lock(RTC_DEV_BUSY, &rtc->flags)) {
-		err = -EBUSY;
-		goto out;
-	}
+	if (test_and_set_bit_lock(RTC_DEV_BUSY, &rtc->flags))
+		return -EBUSY;
 
 	file->private_data = rtc;
 
@@ -41,13 +37,11 @@ static int rtc_dev_open(struct inode *inode, struct file *file)
 		rtc->irq_data = 0;
 		spin_unlock_irq(&rtc->irq_lock);
 
-		goto out;
+		return 0;
 	}
 
 	/* something has gone wrong */
 	clear_bit_unlock(RTC_DEV_BUSY, &rtc->flags);
-out:
-	unlock_kernel();
 	return err;
 }
 
@@ -221,7 +215,7 @@ static long rtc_dev_ioctl(struct file *file,
 
 	err = mutex_lock_interruptible(&rtc->ops_lock);
 	if (err)
-		return -EBUSY;
+		return err;
 
 	/* check that the calling task has appropriate permissions
 	 * for certain ioctls. doing this check here is useful
@@ -409,11 +403,14 @@ static long rtc_dev_ioctl(struct file *file,
 
 #ifdef CONFIG_RTC_INTF_DEV_UIE_EMUL
 	case RTC_UIE_OFF:
+		mutex_unlock(&rtc->ops_lock);
 		clear_uie(rtc);
-		break;
+		return 0;
 
 	case RTC_UIE_ON:
+		mutex_unlock(&rtc->ops_lock);
 		err = set_uie(rtc);
+		return err;
 #endif
 	default:
 		err = -ENOTTY;
@@ -432,6 +429,8 @@ static int rtc_dev_release(struct inode *inode, struct file *file)
 #ifdef CONFIG_RTC_INTF_DEV_UIE_EMUL
 	clear_uie(rtc);
 #endif
+	rtc_irq_set_state(rtc, NULL, 0);
+
 	if (rtc->ops->release)
 		rtc->ops->release(rtc->dev.parent);
 
diff --git a/drivers/rtc/rtc-ds1374.c b/drivers/rtc/rtc-ds1374.c
index 640acd20fdde..a150418fba76 100644
--- a/drivers/rtc/rtc-ds1374.c
+++ b/drivers/rtc/rtc-ds1374.c
@@ -173,7 +173,7 @@ static int ds1374_read_alarm(struct device *dev, struct rtc_wkalrm *alarm)
 	int cr, sr;
 	int ret = 0;
 
-	if (client->irq < 0)
+	if (client->irq <= 0)
 		return -EINVAL;
 
 	mutex_lock(&ds1374->mutex);
@@ -212,7 +212,7 @@ static int ds1374_set_alarm(struct device *dev, struct rtc_wkalrm *alarm)
 	int cr;
 	int ret = 0;
 
-	if (client->irq < 0)
+	if (client->irq <= 0)
 		return -EINVAL;
 
 	ret = ds1374_read_time(dev, &now);
@@ -381,7 +381,7 @@ static int ds1374_probe(struct i2c_client *client,
 	if (ret)
 		goto out_free;
 
-	if (client->irq >= 0) {
+	if (client->irq > 0) {
 		ret = request_irq(client->irq, ds1374_irq, 0,
 		                  "ds1374", client);
 		if (ret) {
@@ -401,7 +401,7 @@ static int ds1374_probe(struct i2c_client *client,
 	return 0;
 
 out_irq:
-	if (client->irq >= 0)
+	if (client->irq > 0)
 		free_irq(client->irq, client);
 
 out_free:
@@ -414,7 +414,7 @@ static int __devexit ds1374_remove(struct i2c_client *client)
 {
 	struct ds1374 *ds1374 = i2c_get_clientdata(client);
 
-	if (client->irq >= 0) {
+	if (client->irq > 0) {
 		mutex_lock(&ds1374->mutex);
 		ds1374->exiting = 1;
 		mutex_unlock(&ds1374->mutex);
diff --git a/drivers/rtc/rtc-ep93xx.c b/drivers/rtc/rtc-ep93xx.c
index 1e99325270df..36e4ac0bd69c 100644
--- a/drivers/rtc/rtc-ep93xx.c
+++ b/drivers/rtc/rtc-ep93xx.c
@@ -12,7 +12,7 @@
 #include <linux/module.h>
 #include <linux/rtc.h>
 #include <linux/platform_device.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 
 #define EP93XX_RTC_REG(x)	(EP93XX_RTC_BASE + (x))
 #define EP93XX_RTC_DATA		EP93XX_RTC_REG(0x0000)
diff --git a/drivers/rtc/rtc-isl1208.c b/drivers/rtc/rtc-isl1208.c
index fbb90b1e4098..a81adab6e515 100644
--- a/drivers/rtc/rtc-isl1208.c
+++ b/drivers/rtc/rtc-isl1208.c
@@ -482,7 +482,7 @@ isl1208_sysfs_register(struct device *dev)
 static int
 isl1208_sysfs_unregister(struct device *dev)
 {
-	device_remove_file(dev, &dev_attr_atrim);
+	device_remove_file(dev, &dev_attr_dtrim);
 	device_remove_file(dev, &dev_attr_atrim);
 	device_remove_file(dev, &dev_attr_usr);
 
diff --git a/drivers/rtc/rtc-lib.c b/drivers/rtc/rtc-lib.c
index 9f996ec881ce..dd70bf73ce9d 100644
--- a/drivers/rtc/rtc-lib.c
+++ b/drivers/rtc/rtc-lib.c
@@ -51,10 +51,11 @@ EXPORT_SYMBOL(rtc_year_days);
  */
 void rtc_time_to_tm(unsigned long time, struct rtc_time *tm)
 {
-	unsigned int days, month, year;
+	unsigned int month, year;
+	int days;
 
 	days = time / 86400;
-	time -= days * 86400;
+	time -= (unsigned int) days * 86400;
 
 	/* day of the week, 1970-01-01 was a Thursday */
 	tm->tm_wday = (days + 4) % 7;
diff --git a/drivers/rtc/rtc-max6902.c b/drivers/rtc/rtc-max6902.c
index 12f0310ae89c..78b2551fb19d 100644
--- a/drivers/rtc/rtc-max6902.c
+++ b/drivers/rtc/rtc-max6902.c
@@ -20,8 +20,6 @@
  */
 
 #include <linux/module.h>
-#include <linux/version.h>
-
 #include <linux/kernel.h>
 #include <linux/platform_device.h>
 #include <linux/init.h>
diff --git a/drivers/rtc/rtc-r9701.c b/drivers/rtc/rtc-r9701.c
index b35f9bfa2af4..395985b339c9 100644
--- a/drivers/rtc/rtc-r9701.c
+++ b/drivers/rtc/rtc-r9701.c
@@ -14,7 +14,6 @@
  */
 
 #include <linux/module.h>
-#include <linux/version.h>
 #include <linux/kernel.h>
 #include <linux/platform_device.h>
 #include <linux/device.h>
diff --git a/drivers/rtc/rtc-s3c.c b/drivers/rtc/rtc-s3c.c
index 54b1ebb01502..e7d19b6c265a 100644
--- a/drivers/rtc/rtc-s3c.c
+++ b/drivers/rtc/rtc-s3c.c
@@ -22,7 +22,7 @@
 #include <linux/clk.h>
 #include <linux/log2.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/uaccess.h>
 #include <asm/io.h>
 #include <asm/irq.h>
diff --git a/drivers/rtc/rtc-sa1100.c b/drivers/rtc/rtc-sa1100.c
index f47294c60148..66a9bb85bbe8 100644
--- a/drivers/rtc/rtc-sa1100.c
+++ b/drivers/rtc/rtc-sa1100.c
@@ -31,11 +31,11 @@
 #include <linux/pm.h>
 #include <linux/bitops.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/irq.h>
 
 #ifdef CONFIG_ARCH_PXA
-#include <asm/arch/pxa-regs.h>
+#include <mach/pxa-regs.h>
 #endif
 
 #define TIMER_FREQ		CLOCK_TICK_RATE
diff --git a/drivers/s390/block/dasd.c b/drivers/s390/block/dasd.c
index 1b6c52ef7339..acb78017e7d0 100644
--- a/drivers/s390/block/dasd.c
+++ b/drivers/s390/block/dasd.c
@@ -2333,13 +2333,11 @@ int dasd_generic_notify(struct ccw_device *cdev, int event)
 {
 	struct dasd_device *device;
 	struct dasd_ccw_req *cqr;
-	unsigned long flags;
 	int ret;
 
-	device = dasd_device_from_cdev(cdev);
+	device = dasd_device_from_cdev_locked(cdev);
 	if (IS_ERR(device))
 		return 0;
-	spin_lock_irqsave(get_ccwdev_lock(cdev), flags);
 	ret = 0;
 	switch (event) {
 	case CIO_GONE:
@@ -2369,7 +2367,6 @@ int dasd_generic_notify(struct ccw_device *cdev, int event)
 		ret = 1;
 		break;
 	}
-	spin_unlock_irqrestore(get_ccwdev_lock(cdev), flags);
 	dasd_put_device(device);
 	return ret;
 }
diff --git a/drivers/s390/block/dasd_alias.c b/drivers/s390/block/dasd_alias.c
index 2d8df0b30538..20676cdef4a5 100644
--- a/drivers/s390/block/dasd_alias.c
+++ b/drivers/s390/block/dasd_alias.c
@@ -91,7 +91,8 @@ static struct alias_pav_group *_find_group(struct alias_lcu *lcu,
 	else
 		search_unit_addr = uid->base_unit_addr;
 	list_for_each_entry(pos, &lcu->grouplist, group) {
-		if (pos->uid.base_unit_addr == search_unit_addr)
+		if (pos->uid.base_unit_addr == search_unit_addr &&
+		    !strncmp(pos->uid.vduit, uid->vduit, sizeof(uid->vduit)))
 			return pos;
 	};
 	return NULL;
@@ -332,6 +333,7 @@ static int _add_device_to_lcu(struct alias_lcu *lcu,
 			group->uid.base_unit_addr = uid->real_unit_addr;
 		else
 			group->uid.base_unit_addr = uid->base_unit_addr;
+		memcpy(group->uid.vduit, uid->vduit, sizeof(uid->vduit));
 		INIT_LIST_HEAD(&group->group);
 		INIT_LIST_HEAD(&group->baselist);
 		INIT_LIST_HEAD(&group->aliaslist);
diff --git a/drivers/s390/block/dasd_devmap.c b/drivers/s390/block/dasd_devmap.c
index d774e79476fe..cd3335c1c307 100644
--- a/drivers/s390/block/dasd_devmap.c
+++ b/drivers/s390/block/dasd_devmap.c
@@ -913,7 +913,8 @@ dasd_vendor_show(struct device *dev, struct device_attribute *attr, char *buf)
 static DEVICE_ATTR(vendor, 0444, dasd_vendor_show, NULL);
 
 #define UID_STRLEN ( /* vendor */ 3 + 1 + /* serial    */ 14 + 1 +\
-		     /* SSID   */ 4 + 1 + /* unit addr */ 2 + 1)
+		     /* SSID   */ 4 + 1 + /* unit addr */ 2 + 1 +\
+		     /* vduit */ 32 + 1)
 
 static ssize_t
 dasd_uid_show(struct device *dev, struct device_attribute *attr, char *buf)
@@ -945,8 +946,17 @@ dasd_uid_show(struct device *dev, struct device_attribute *attr, char *buf)
 		sprintf(ua_string, "%02x", uid->real_unit_addr);
 		break;
 	}
-	snprintf(uid_string, sizeof(uid_string), "%s.%s.%04x.%s",
-		 uid->vendor, uid->serial, uid->ssid, ua_string);
+	if (strlen(uid->vduit) > 0)
+		snprintf(uid_string, sizeof(uid_string),
+			 "%s.%s.%04x.%s.%s",
+			 uid->vendor, uid->serial,
+			 uid->ssid, ua_string,
+			 uid->vduit);
+	else
+		snprintf(uid_string, sizeof(uid_string),
+			 "%s.%s.%04x.%s",
+			 uid->vendor, uid->serial,
+			 uid->ssid, ua_string);
 	spin_unlock(&dasd_devmap_lock);
 	return snprintf(buf, PAGE_SIZE, "%s\n", uid_string);
 }
diff --git a/drivers/s390/block/dasd_eckd.c b/drivers/s390/block/dasd_eckd.c
index 3590fdb5b2fd..773b3fe275b2 100644
--- a/drivers/s390/block/dasd_eckd.c
+++ b/drivers/s390/block/dasd_eckd.c
@@ -313,8 +313,8 @@ static int prefix(struct ccw1 *ccw, struct PFX_eckd_data *pfxdata, int trk,
 	memset(pfxdata, 0, sizeof(*pfxdata));
 	/* prefix data */
 	pfxdata->format = 0;
-	pfxdata->base_address = basepriv->conf_data.ned1.unit_addr;
-	pfxdata->base_lss = basepriv->conf_data.ned1.ID;
+	pfxdata->base_address = basepriv->ned->unit_addr;
+	pfxdata->base_lss = basepriv->ned->ID;
 	pfxdata->validity.define_extend = 1;
 
 	/* private uid is kept up to date, conf_data may be outdated */
@@ -536,36 +536,40 @@ dasd_eckd_cdl_reclen(int recid)
 /*
  * Generate device unique id that specifies the physical device.
  */
-static int
-dasd_eckd_generate_uid(struct dasd_device *device, struct dasd_uid *uid)
+static int dasd_eckd_generate_uid(struct dasd_device *device,
+				  struct dasd_uid *uid)
 {
 	struct dasd_eckd_private *private;
-	struct dasd_eckd_confdata *confdata;
+	int count;
 
 	private = (struct dasd_eckd_private *) device->private;
 	if (!private)
 		return -ENODEV;
-	confdata = &private->conf_data;
-	if (!confdata)
+	if (!private->ned || !private->gneq)
 		return -ENODEV;
 
 	memset(uid, 0, sizeof(struct dasd_uid));
-	memcpy(uid->vendor, confdata->ned1.HDA_manufacturer,
+	memcpy(uid->vendor, private->ned->HDA_manufacturer,
 	       sizeof(uid->vendor) - 1);
 	EBCASC(uid->vendor, sizeof(uid->vendor) - 1);
-	memcpy(uid->serial, confdata->ned1.HDA_location,
+	memcpy(uid->serial, private->ned->HDA_location,
 	       sizeof(uid->serial) - 1);
 	EBCASC(uid->serial, sizeof(uid->serial) - 1);
-	uid->ssid = confdata->neq.subsystemID;
-	uid->real_unit_addr = confdata->ned1.unit_addr;
-	if (confdata->ned2.sneq.flags == 0x40 &&
-	    confdata->ned2.sneq.format == 0x0001) {
-		uid->type = confdata->ned2.sneq.sua_flags;
+	uid->ssid = private->gneq->subsystemID;
+	uid->real_unit_addr = private->ned->unit_addr;;
+	if (private->sneq) {
+		uid->type = private->sneq->sua_flags;
 		if (uid->type == UA_BASE_PAV_ALIAS)
-			uid->base_unit_addr = confdata->ned2.sneq.base_unit_addr;
+			uid->base_unit_addr = private->sneq->base_unit_addr;
 	} else {
 		uid->type = UA_BASE_DEVICE;
 	}
+	if (private->vdsneq) {
+		for (count = 0; count < 16; count++) {
+			sprintf(uid->vduit+2*count, "%02x",
+				private->vdsneq->uit[count]);
+		}
+	}
 	return 0;
 }
 
@@ -623,6 +627,15 @@ static int dasd_eckd_read_conf_lpm(struct dasd_device *device,
 		ret = -ENOMEM;
 		goto out_error;
 	}
+
+	/*
+	 * buffer has to start with EBCDIC "V1.0" to show
+	 * support for virtual device SNEQ
+	 */
+	rcd_buf[0] = 0xE5;
+	rcd_buf[1] = 0xF1;
+	rcd_buf[2] = 0x4B;
+	rcd_buf[3] = 0xF0;
 	cqr = dasd_eckd_build_rcd_lpm(device, rcd_buf, ciw, lpm);
 	if (IS_ERR(cqr)) {
 		ret =  PTR_ERR(cqr);
@@ -646,8 +659,62 @@ out_error:
 	return ret;
 }
 
-static int
-dasd_eckd_read_conf(struct dasd_device *device)
+static int dasd_eckd_identify_conf_parts(struct dasd_eckd_private *private)
+{
+
+	struct dasd_sneq *sneq;
+	int i, count;
+
+	private->ned = NULL;
+	private->sneq = NULL;
+	private->vdsneq = NULL;
+	private->gneq = NULL;
+	count = private->conf_len / sizeof(struct dasd_sneq);
+	sneq = (struct dasd_sneq *)private->conf_data;
+	for (i = 0; i < count; ++i) {
+		if (sneq->flags.identifier == 1 && sneq->format == 1)
+			private->sneq = sneq;
+		else if (sneq->flags.identifier == 1 && sneq->format == 4)
+			private->vdsneq = (struct vd_sneq *)sneq;
+		else if (sneq->flags.identifier == 2)
+			private->gneq = (struct dasd_gneq *)sneq;
+		else if (sneq->flags.identifier == 3 && sneq->res1 == 1)
+			private->ned = (struct dasd_ned *)sneq;
+		sneq++;
+	}
+	if (!private->ned || !private->gneq) {
+		private->ned = NULL;
+		private->sneq = NULL;
+		private->vdsneq = NULL;
+		private->gneq = NULL;
+		return -EINVAL;
+	}
+	return 0;
+
+};
+
+static unsigned char dasd_eckd_path_access(void *conf_data, int conf_len)
+{
+	struct dasd_gneq *gneq;
+	int i, count, found;
+
+	count = conf_len / sizeof(*gneq);
+	gneq = (struct dasd_gneq *)conf_data;
+	found = 0;
+	for (i = 0; i < count; ++i) {
+		if (gneq->flags.identifier == 2) {
+			found = 1;
+			break;
+		}
+		gneq++;
+	}
+	if (found)
+		return ((char *)gneq)[18] & 0x07;
+	else
+		return 0;
+}
+
+static int dasd_eckd_read_conf(struct dasd_device *device)
 {
 	void *conf_data;
 	int conf_len, conf_data_saved;
@@ -661,7 +728,6 @@ dasd_eckd_read_conf(struct dasd_device *device)
 	path_data->opm = ccw_device_get_path_mask(device->cdev);
 	lpm = 0x80;
 	conf_data_saved = 0;
-
 	/* get configuration data per operational path */
 	for (lpm = 0x80; lpm; lpm>>= 1) {
 		if (lpm & path_data->opm){
@@ -678,22 +744,20 @@ dasd_eckd_read_conf(struct dasd_device *device)
 					"data retrieved");
 				continue;	/* no error */
 			}
-			if (conf_len != sizeof(struct dasd_eckd_confdata)) {
-				MESSAGE(KERN_WARNING,
-					"sizes of configuration data mismatch"
-					"%d (read) vs %ld (expected)",
-					conf_len,
-					sizeof(struct dasd_eckd_confdata));
-				kfree(conf_data);
-				continue;	/* no error */
-			}
 			/* save first valid configuration data */
-			if (!conf_data_saved){
-				memcpy(&private->conf_data, conf_data,
-				       sizeof(struct dasd_eckd_confdata));
+			if (!conf_data_saved) {
+				kfree(private->conf_data);
+				private->conf_data = conf_data;
+				private->conf_len = conf_len;
+				if (dasd_eckd_identify_conf_parts(private)) {
+					private->conf_data = NULL;
+					private->conf_len = 0;
+					kfree(conf_data);
+					continue;
+				}
 				conf_data_saved++;
 			}
-			switch (((char *)conf_data)[242] & 0x07){
+			switch (dasd_eckd_path_access(conf_data, conf_len)) {
 			case 0x02:
 				path_data->npm |= lpm;
 				break;
@@ -701,7 +765,8 @@ dasd_eckd_read_conf(struct dasd_device *device)
 				path_data->ppm |= lpm;
 				break;
 			}
-			kfree(conf_data);
+			if (conf_data != private->conf_data)
+				kfree(conf_data);
 		}
 	}
 	return 0;
@@ -952,6 +1017,7 @@ out_err2:
 	dasd_free_block(device->block);
 	device->block = NULL;
 out_err1:
+	kfree(private->conf_data);
 	kfree(device->private);
 	device->private = NULL;
 	return rc;
@@ -959,7 +1025,17 @@ out_err1:
 
 static void dasd_eckd_uncheck_device(struct dasd_device *device)
 {
+	struct dasd_eckd_private *private;
+
+	private = (struct dasd_eckd_private *) device->private;
 	dasd_alias_disconnect_device_from_lcu(device);
+	private->ned = NULL;
+	private->sneq = NULL;
+	private->vdsneq = NULL;
+	private->gneq = NULL;
+	private->conf_len = 0;
+	kfree(private->conf_data);
+	private->conf_data = NULL;
 }
 
 static struct dasd_ccw_req *
@@ -1746,9 +1822,10 @@ dasd_eckd_fill_info(struct dasd_device * device,
 	info->characteristics_size = sizeof(struct dasd_eckd_characteristics);
 	memcpy(info->characteristics, &private->rdc_data,
 	       sizeof(struct dasd_eckd_characteristics));
-	info->confdata_size = sizeof(struct dasd_eckd_confdata);
-	memcpy(info->configuration_data, &private->conf_data,
-	       sizeof(struct dasd_eckd_confdata));
+	info->confdata_size = min((unsigned long)private->conf_len,
+				  sizeof(info->configuration_data));
+	memcpy(info->configuration_data, private->conf_data,
+	       info->confdata_size);
 	return 0;
 }
 
diff --git a/drivers/s390/block/dasd_eckd.h b/drivers/s390/block/dasd_eckd.h
index fc2509c939bc..2476f87d21d0 100644
--- a/drivers/s390/block/dasd_eckd.h
+++ b/drivers/s390/block/dasd_eckd.h
@@ -231,133 +231,62 @@ struct dasd_eckd_characteristics {
 	__u8 reserved3[10];
 } __attribute__ ((packed));
 
-struct dasd_eckd_confdata {
+/* elements of the configuration data */
+struct dasd_ned {
 	struct {
-		struct {
-			unsigned char identifier:2;
-			unsigned char token_id:1;
-			unsigned char sno_valid:1;
-			unsigned char subst_sno:1;
-			unsigned char recNED:1;
-			unsigned char emuNED:1;
-			unsigned char reserved:1;
-		} __attribute__ ((packed)) flags;
-		__u8 descriptor;
-		__u8 dev_class;
-		__u8 reserved;
-		unsigned char dev_type[6];
-		unsigned char dev_model[3];
-		unsigned char HDA_manufacturer[3];
-		unsigned char HDA_location[2];
-		unsigned char HDA_seqno[12];
-		__u8 ID;
-		__u8 unit_addr;
-	} __attribute__ ((packed)) ned1;
-	union {
-		struct {
-			struct {
-				unsigned char identifier:2;
-				unsigned char token_id:1;
-				unsigned char sno_valid:1;
-				unsigned char subst_sno:1;
-				unsigned char recNED:1;
-				unsigned char emuNED:1;
-				unsigned char reserved:1;
-			} __attribute__ ((packed)) flags;
-			__u8 descriptor;
-			__u8 reserved[2];
-			unsigned char dev_type[6];
-			unsigned char dev_model[3];
-			unsigned char DASD_manufacturer[3];
-			unsigned char DASD_location[2];
-			unsigned char DASD_seqno[12];
-			__u16 ID;
-		} __attribute__ ((packed)) ned;
-		struct {
-			unsigned char flags;            /* byte  0    */
-			unsigned char res1;		/* byte  1    */
-			__u16 format;			/* byte  2-3  */
-			unsigned char res2[4];		/* byte  4-7  */
-			unsigned char sua_flags;	/* byte  8    */
-			__u8 base_unit_addr;            /* byte  9    */
-			unsigned char res3[22];	        /* byte 10-31 */
-		} __attribute__ ((packed)) sneq;
-	} __attribute__ ((packed)) ned2;
+		__u8 identifier:2;
+		__u8 token_id:1;
+		__u8 sno_valid:1;
+		__u8 subst_sno:1;
+		__u8 recNED:1;
+		__u8 emuNED:1;
+		__u8 reserved:1;
+	} __attribute__ ((packed)) flags;
+	__u8 descriptor;
+	__u8 dev_class;
+	__u8 reserved;
+	__u8 dev_type[6];
+	__u8 dev_model[3];
+	__u8 HDA_manufacturer[3];
+	__u8 HDA_location[2];
+	__u8 HDA_seqno[12];
+	__u8 ID;
+	__u8 unit_addr;
+} __attribute__ ((packed));
+
+struct dasd_sneq {
 	struct {
-		struct {
-			unsigned char identifier:2;
-			unsigned char token_id:1;
-			unsigned char sno_valid:1;
-			unsigned char subst_sno:1;
-			unsigned char recNED:1;
-			unsigned char emuNED:1;
-			unsigned char reserved:1;
-		} __attribute__ ((packed)) flags;
-		__u8 descriptor;
-		__u8 reserved[2];
-		unsigned char cont_type[6];
-		unsigned char cont_model[3];
-		unsigned char cont_manufacturer[3];
-		unsigned char cont_location[2];
-		unsigned char cont_seqno[12];
-		__u16 ID;
-	} __attribute__ ((packed)) ned3;
+		__u8 identifier:2;
+		__u8 reserved:6;
+	} __attribute__ ((packed)) flags;
+	__u8 res1;
+	__u16 format;
+	__u8 res2[4];		/* byte  4- 7 */
+	__u8 sua_flags;		/* byte  8    */
+	__u8 base_unit_addr;	/* byte  9    */
+	__u8 res3[22];		/* byte 10-31 */
+} __attribute__ ((packed));
+
+struct vd_sneq {
 	struct {
-		struct {
-			unsigned char identifier:2;
-			unsigned char token_id:1;
-			unsigned char sno_valid:1;
-			unsigned char subst_sno:1;
-			unsigned char recNED:1;
-			unsigned char emuNED:1;
-			unsigned char reserved:1;
-		} __attribute__ ((packed)) flags;
-		__u8 descriptor;
-		__u8 reserved[2];
-		unsigned char cont_type[6];
-		unsigned char empty[3];
-		unsigned char cont_manufacturer[3];
-		unsigned char cont_location[2];
-		unsigned char cont_seqno[12];
-		__u16 ID;
-	} __attribute__ ((packed)) ned4;
-	unsigned char ned5[32];
-	unsigned char ned6[32];
-	unsigned char ned7[32];
+		__u8 identifier:2;
+		__u8 reserved:6;
+	} __attribute__ ((packed)) flags;
+	__u8 res1;
+	__u16 format;
+	__u8 res2[4];	/* byte  4- 7 */
+	__u8 uit[16];	/* byte  8-23 */
+	__u8 res3[8];	/* byte 24-31 */
+} __attribute__ ((packed));
+
+struct dasd_gneq {
 	struct {
-		struct {
-			unsigned char identifier:2;
-			unsigned char reserved:6;
-		} __attribute__ ((packed)) flags;
-		__u8 selector;
-		__u16 interfaceID;
-		__u32 reserved;
-		__u16 subsystemID;
-		struct {
-			unsigned char sp0:1;
-			unsigned char sp1:1;
-			unsigned char reserved:5;
-			unsigned char scluster:1;
-		} __attribute__ ((packed)) spathID;
-		__u8 unit_address;
-		__u8 dev_ID;
-		__u8 dev_address;
-		__u8 adapterID;
-		__u16 link_address;
-		struct {
-			unsigned char parallel:1;
-			unsigned char escon:1;
-			unsigned char reserved:1;
-			unsigned char ficon:1;
-			unsigned char reserved2:4;
-		} __attribute__ ((packed)) protocol_type;
-		struct {
-			unsigned char PID_in_236:1;
-			unsigned char reserved:7;
-		} __attribute__ ((packed)) format_flags;
-		__u8 log_dev_address;
-		unsigned char reserved2[12];
-	} __attribute__ ((packed)) neq;
+		__u8 identifier:2;
+		__u8 reserved:6;
+	} __attribute__ ((packed)) flags;
+	__u8 reserved[7];
+	__u16 subsystemID;
+	__u8 reserved2[22];
 } __attribute__ ((packed));
 
 struct dasd_eckd_path {
@@ -379,7 +308,7 @@ struct dasd_psf_prssd_data {
 	unsigned char flags;
 	unsigned char reserved[4];
 	unsigned char suborder;
-	unsigned char varies[9];
+	unsigned char varies[5];
 } __attribute__ ((packed));
 
 /*
@@ -463,7 +392,14 @@ struct alias_pav_group {
 
 struct dasd_eckd_private {
 	struct dasd_eckd_characteristics rdc_data;
-	struct dasd_eckd_confdata conf_data;
+	u8 *conf_data;
+	int conf_len;
+	/* pointers to specific parts in the conf_data */
+	struct dasd_ned *ned;
+	struct dasd_sneq *sneq;
+	struct vd_sneq *vdsneq;
+	struct dasd_gneq *gneq;
+
 	struct dasd_eckd_path path_data;
 	struct eckd_count count_area[5];
 	int init_cqr_status;
diff --git a/drivers/s390/block/dasd_eer.c b/drivers/s390/block/dasd_eer.c
index 29da4413ad43..bf512ac75b9e 100644
--- a/drivers/s390/block/dasd_eer.c
+++ b/drivers/s390/block/dasd_eer.c
@@ -16,6 +16,7 @@
 #include <linux/poll.h>
 #include <linux/mutex.h>
 #include <linux/smp_lock.h>
+#include <linux/err.h>
 
 #include <asm/uaccess.h>
 #include <asm/atomic.h>
@@ -457,7 +458,7 @@ int dasd_eer_enable(struct dasd_device *device)
 
 	cqr = dasd_kmalloc_request("ECKD", 1 /* SNSS */,
 				   SNSS_DATA_SIZE, device);
-	if (!cqr)
+	if (IS_ERR(cqr))
 		return -ENOMEM;
 
 	cqr->startdev = device;
diff --git a/drivers/s390/block/dasd_int.h b/drivers/s390/block/dasd_int.h
index fb2f931cf844..31ecaa4a40e4 100644
--- a/drivers/s390/block/dasd_int.h
+++ b/drivers/s390/block/dasd_int.h
@@ -307,6 +307,7 @@ struct dasd_uid {
 	__u16 ssid;
 	__u8 real_unit_addr;
 	__u8 base_unit_addr;
+	char vduit[33];
 };
 
 /*
diff --git a/drivers/s390/block/dcssblk.c b/drivers/s390/block/dcssblk.c
index 01fcdd91b846..711b3004b3e6 100644
--- a/drivers/s390/block/dcssblk.c
+++ b/drivers/s390/block/dcssblk.c
@@ -384,6 +384,11 @@ dcssblk_add_store(struct device *dev, struct device_attribute *attr, const char
 	 * get minor, add to list
 	 */
 	down_write(&dcssblk_devices_sem);
+	if (dcssblk_get_device_by_name(local_buf)) {
+		up_write(&dcssblk_devices_sem);
+		rc = -EEXIST;
+		goto unload_seg;
+	}
 	rc = dcssblk_assign_free_minor(dev_info);
 	if (rc) {
 		up_write(&dcssblk_devices_sem);
diff --git a/drivers/s390/char/sclp.c b/drivers/s390/char/sclp.c
index 3c8b25e6c345..1fd8f2193ed8 100644
--- a/drivers/s390/char/sclp.c
+++ b/drivers/s390/char/sclp.c
@@ -399,6 +399,7 @@ sclp_tod_from_jiffies(unsigned long jiffies)
 void
 sclp_sync_wait(void)
 {
+	unsigned long long old_tick;
 	unsigned long flags;
 	unsigned long cr0, cr0_sync;
 	u64 timeout;
@@ -419,11 +420,12 @@ sclp_sync_wait(void)
 	if (!irq_context)
 		local_bh_disable();
 	/* Enable service-signal interruption, disable timer interrupts */
+	old_tick = local_tick_disable();
 	trace_hardirqs_on();
 	__ctl_store(cr0, 0, 0);
 	cr0_sync = cr0;
+	cr0_sync &= 0xffff00a0;
 	cr0_sync |= 0x00000200;
-	cr0_sync &= 0xFFFFF3AC;
 	__ctl_load(cr0_sync, 0, 0);
 	__raw_local_irq_stosm(0x01);
 	/* Loop until driver state indicates finished request */
@@ -439,9 +441,9 @@ sclp_sync_wait(void)
 	__ctl_load(cr0, 0, 0);
 	if (!irq_context)
 		_local_bh_enable();
+	local_tick_enable(old_tick);
 	local_irq_restore(flags);
 }
-
 EXPORT_SYMBOL(sclp_sync_wait);
 
 /* Dispatch changes in send and receive mask to registered listeners. */
diff --git a/drivers/s390/char/sclp_cmd.c b/drivers/s390/char/sclp_cmd.c
index 0c2b77493db4..eb5f1b8bc57f 100644
--- a/drivers/s390/char/sclp_cmd.c
+++ b/drivers/s390/char/sclp_cmd.c
@@ -427,6 +427,8 @@ static int sclp_mem_notifier(struct notifier_block *nb,
 			sclp_attach_storage(id);
 	switch (action) {
 	case MEM_ONLINE:
+	case MEM_GOING_OFFLINE:
+	case MEM_CANCEL_OFFLINE:
 		break;
 	case MEM_GOING_ONLINE:
 		rc = sclp_mem_change_state(start, size, 1);
@@ -434,6 +436,9 @@ static int sclp_mem_notifier(struct notifier_block *nb,
 	case MEM_CANCEL_ONLINE:
 		sclp_mem_change_state(start, size, 0);
 		break;
+	case MEM_OFFLINE:
+		sclp_mem_change_state(start, size, 0);
+		break;
 	default:
 		rc = -EINVAL;
 		break;
diff --git a/drivers/s390/char/sclp_config.c b/drivers/s390/char/sclp_config.c
index fff4ff485d9b..4cebd6ee6d27 100644
--- a/drivers/s390/char/sclp_config.c
+++ b/drivers/s390/char/sclp_config.c
@@ -8,7 +8,6 @@
 #include <linux/init.h>
 #include <linux/errno.h>
 #include <linux/cpu.h>
-#include <linux/kthread.h>
 #include <linux/sysdev.h>
 #include <linux/workqueue.h>
 #include <asm/smp.h>
@@ -41,19 +40,9 @@ static void sclp_cpu_capability_notify(struct work_struct *work)
 	put_online_cpus();
 }
 
-static int sclp_cpu_kthread(void *data)
-{
-	smp_rescan_cpus();
-	return 0;
-}
-
 static void __ref sclp_cpu_change_notify(struct work_struct *work)
 {
-	/* Can't call smp_rescan_cpus() from  workqueue context since it may
-	 * deadlock in case of cpu hotplug. So we have to create a kernel
-	 * thread in order to call it.
-	 */
-	kthread_run(sclp_cpu_kthread, NULL, "cpu_rescan");
+	smp_rescan_cpus();
 }
 
 static void sclp_conf_receiver_fn(struct evbuf_header *evbuf)
diff --git a/drivers/s390/char/tape_char.c b/drivers/s390/char/tape_char.c
index 687720b552d1..be0ce2215c8d 100644
--- a/drivers/s390/char/tape_char.c
+++ b/drivers/s390/char/tape_char.c
@@ -109,7 +109,7 @@ tapechar_check_idalbuffer(struct tape_device *device, size_t block_size)
 
 	/* The current idal buffer is not correct. Allocate a new one. */
 	new = idal_buffer_alloc(block_size, 0);
-	if (new == NULL)
+	if (IS_ERR(new))
 		return -ENOMEM;
 
 	if (device->char_data.idal_buf != NULL)
diff --git a/drivers/s390/char/tape_std.c b/drivers/s390/char/tape_std.c
index 2a1af4e60be0..cc8fd781ee22 100644
--- a/drivers/s390/char/tape_std.c
+++ b/drivers/s390/char/tape_std.c
@@ -248,7 +248,7 @@ tape_std_mtsetblk(struct tape_device *device, int count)
 
 	/* Allocate a new idal buffer. */
 	new = idal_buffer_alloc(count, 0);
-	if (new == NULL)
+	if (IS_ERR(new))
 		return -ENOMEM;
 	if (device->char_data.idal_buf != NULL)
 		idal_buffer_free(device->char_data.idal_buf);
diff --git a/drivers/s390/cio/ccwgroup.c b/drivers/s390/cio/ccwgroup.c
index 26a930e832bd..e0ce65fca4e7 100644
--- a/drivers/s390/cio/ccwgroup.c
+++ b/drivers/s390/cio/ccwgroup.c
@@ -112,8 +112,10 @@ ccwgroup_release (struct device *dev)
 	gdev = to_ccwgroupdev(dev);
 
 	for (i = 0; i < gdev->count; i++) {
-		dev_set_drvdata(&gdev->cdev[i]->dev, NULL);
-		put_device(&gdev->cdev[i]->dev);
+		if (gdev->cdev[i]) {
+			dev_set_drvdata(&gdev->cdev[i]->dev, NULL);
+			put_device(&gdev->cdev[i]->dev);
+		}
 	}
 	kfree(gdev);
 }
@@ -221,6 +223,13 @@ int ccwgroup_create_from_string(struct device *root, unsigned int creator_id,
 	atomic_set(&gdev->onoff, 0);
 	mutex_init(&gdev->reg_mutex);
 	mutex_lock(&gdev->reg_mutex);
+	gdev->creator_id = creator_id;
+	gdev->count = num_devices;
+	gdev->dev.bus = &ccwgroup_bus_type;
+	gdev->dev.parent = root;
+	gdev->dev.release = ccwgroup_release;
+	device_initialize(&gdev->dev);
+
 	curr_buf = buf;
 	for (i = 0; i < num_devices && curr_buf; i++) {
 		rc = __get_next_bus_id(&curr_buf, tmp_bus_id);
@@ -258,16 +267,11 @@ int ccwgroup_create_from_string(struct device *root, unsigned int creator_id,
 		rc = -EINVAL;
 		goto error;
 	}
-	gdev->creator_id = creator_id;
-	gdev->count = num_devices;
-	gdev->dev.bus = &ccwgroup_bus_type;
-	gdev->dev.parent = root;
-	gdev->dev.release = ccwgroup_release;
 
 	snprintf (gdev->dev.bus_id, BUS_ID_SIZE, "%s",
 			gdev->cdev[0]->dev.bus_id);
 
-	rc = device_register(&gdev->dev);
+	rc = device_add(&gdev->dev);
 	if (rc)
 		goto error;
 	get_device(&gdev->dev);
diff --git a/drivers/s390/cio/css.c b/drivers/s390/cio/css.c
index 46c021d880dc..51489eff6b0b 100644
--- a/drivers/s390/cio/css.c
+++ b/drivers/s390/cio/css.c
@@ -477,7 +477,6 @@ void css_schedule_eval_all(void)
 
 void css_wait_for_slow_path(void)
 {
-	flush_workqueue(ccw_device_notify_work);
 	flush_workqueue(slow_path_wq);
 }
 
diff --git a/drivers/s390/cio/device.c b/drivers/s390/cio/device.c
index e818d0c54c09..28221030b886 100644
--- a/drivers/s390/cio/device.c
+++ b/drivers/s390/cio/device.c
@@ -150,7 +150,6 @@ static struct css_driver io_subchannel_driver = {
 };
 
 struct workqueue_struct *ccw_device_work;
-struct workqueue_struct *ccw_device_notify_work;
 wait_queue_head_t ccw_device_init_wq;
 atomic_t ccw_device_init_count;
 
@@ -168,11 +167,6 @@ init_ccw_bus_type (void)
 	ccw_device_work = create_singlethread_workqueue("cio");
 	if (!ccw_device_work)
 		return -ENOMEM; /* FIXME: better errno ? */
-	ccw_device_notify_work = create_singlethread_workqueue("cio_notify");
-	if (!ccw_device_notify_work) {
-		ret = -ENOMEM; /* FIXME: better errno ? */
-		goto out_err;
-	}
 	slow_path_wq = create_singlethread_workqueue("kslowcrw");
 	if (!slow_path_wq) {
 		ret = -ENOMEM; /* FIXME: better errno ? */
@@ -192,8 +186,6 @@ init_ccw_bus_type (void)
 out_err:
 	if (ccw_device_work)
 		destroy_workqueue(ccw_device_work);
-	if (ccw_device_notify_work)
-		destroy_workqueue(ccw_device_notify_work);
 	if (slow_path_wq)
 		destroy_workqueue(slow_path_wq);
 	return ret;
@@ -204,7 +196,6 @@ cleanup_ccw_bus_type (void)
 {
 	css_driver_unregister(&io_subchannel_driver);
 	bus_unregister(&ccw_bus_type);
-	destroy_workqueue(ccw_device_notify_work);
 	destroy_workqueue(ccw_device_work);
 }
 
@@ -1496,11 +1487,22 @@ static void device_set_disconnected(struct ccw_device *cdev)
 		ccw_device_schedule_recovery();
 }
 
+void ccw_device_set_notoper(struct ccw_device *cdev)
+{
+	struct subchannel *sch = to_subchannel(cdev->dev.parent);
+
+	CIO_TRACE_EVENT(2, "notoper");
+	CIO_TRACE_EVENT(2, sch->dev.bus_id);
+	ccw_device_set_timeout(cdev, 0);
+	cio_disable_subchannel(sch);
+	cdev->private->state = DEV_STATE_NOT_OPER;
+}
+
 static int io_subchannel_sch_event(struct subchannel *sch, int slow)
 {
 	int event, ret, disc;
 	unsigned long flags;
-	enum { NONE, UNREGISTER, UNREGISTER_PROBE, REPROBE } action;
+	enum { NONE, UNREGISTER, UNREGISTER_PROBE, REPROBE, DISC } action;
 	struct ccw_device *cdev;
 
 	spin_lock_irqsave(sch->lock, flags);
@@ -1535,16 +1537,11 @@ static int io_subchannel_sch_event(struct subchannel *sch, int slow)
 		}
 		/* fall through */
 	case CIO_GONE:
-		/* Prevent unwanted effects when opening lock. */
-		cio_disable_subchannel(sch);
-		device_set_disconnected(cdev);
 		/* Ask driver what to do with device. */
-		action = UNREGISTER;
-		spin_unlock_irqrestore(sch->lock, flags);
-		ret = io_subchannel_notify(sch, event);
-		spin_lock_irqsave(sch->lock, flags);
-		if (ret)
-			action = NONE;
+		if (io_subchannel_notify(sch, event))
+			action = DISC;
+		else
+			action = UNREGISTER;
 		break;
 	case CIO_REVALIDATE:
 		/* Device will be removed, so no notify necessary. */
@@ -1565,6 +1562,7 @@ static int io_subchannel_sch_event(struct subchannel *sch, int slow)
 	switch (action) {
 	case UNREGISTER:
 	case UNREGISTER_PROBE:
+		ccw_device_set_notoper(cdev);
 		/* Unregister device (will use subchannel lock). */
 		spin_unlock_irqrestore(sch->lock, flags);
 		css_sch_device_unregister(sch);
@@ -1577,6 +1575,9 @@ static int io_subchannel_sch_event(struct subchannel *sch, int slow)
 	case REPROBE:
 		ccw_device_trigger_reprobe(cdev);
 		break;
+	case DISC:
+		device_set_disconnected(cdev);
+		break;
 	default:
 		break;
 	}
@@ -1828,5 +1829,4 @@ EXPORT_SYMBOL(ccw_driver_unregister);
 EXPORT_SYMBOL(get_ccwdev_by_busid);
 EXPORT_SYMBOL(ccw_bus_type);
 EXPORT_SYMBOL(ccw_device_work);
-EXPORT_SYMBOL(ccw_device_notify_work);
 EXPORT_SYMBOL_GPL(ccw_device_get_subchannel_id);
diff --git a/drivers/s390/cio/device.h b/drivers/s390/cio/device.h
index 9800a8335a3f..6f5c3f2b3587 100644
--- a/drivers/s390/cio/device.h
+++ b/drivers/s390/cio/device.h
@@ -72,7 +72,6 @@ dev_fsm_final_state(struct ccw_device *cdev)
 }
 
 extern struct workqueue_struct *ccw_device_work;
-extern struct workqueue_struct *ccw_device_notify_work;
 extern wait_queue_head_t ccw_device_init_wq;
 extern atomic_t ccw_device_init_count;
 
@@ -120,6 +119,7 @@ int ccw_device_stlck(struct ccw_device *);
 void ccw_device_trigger_reprobe(struct ccw_device *);
 void ccw_device_kill_io(struct ccw_device *);
 int ccw_device_notify(struct ccw_device *, int);
+void ccw_device_set_notoper(struct ccw_device *cdev);
 
 /* qdio needs this. */
 void ccw_device_set_timeout(struct ccw_device *, int);
diff --git a/drivers/s390/cio/device_fsm.c b/drivers/s390/cio/device_fsm.c
index 8b5fe57fb2f3..550508df952b 100644
--- a/drivers/s390/cio/device_fsm.c
+++ b/drivers/s390/cio/device_fsm.c
@@ -337,26 +337,34 @@ int ccw_device_notify(struct ccw_device *cdev, int event)
 		return 0;
 	if (!cdev->online)
 		return 0;
+	CIO_MSG_EVENT(2, "notify called for 0.%x.%04x, event=%d\n",
+		      cdev->private->dev_id.ssid, cdev->private->dev_id.devno,
+		      event);
 	return cdev->drv->notify ? cdev->drv->notify(cdev, event) : 0;
 }
 
-static void
-ccw_device_oper_notify(struct work_struct *work)
+static void cmf_reenable_delayed(struct work_struct *work)
 {
 	struct ccw_device_private *priv;
 	struct ccw_device *cdev;
-	int ret;
 
 	priv = container_of(work, struct ccw_device_private, kick_work);
 	cdev = priv->cdev;
-	ret = ccw_device_notify(cdev, CIO_OPER);
-	if (ret) {
+	cmf_reenable(cdev);
+}
+
+static void ccw_device_oper_notify(struct ccw_device *cdev)
+{
+	if (ccw_device_notify(cdev, CIO_OPER)) {
 		/* Reenable channel measurements, if needed. */
-		cmf_reenable(cdev);
-		wake_up(&cdev->private->wait_q);
-	} else
-		/* Driver doesn't want device back. */
-		ccw_device_do_unreg_rereg(work);
+		PREPARE_WORK(&cdev->private->kick_work, cmf_reenable_delayed);
+		queue_work(ccw_device_work, &cdev->private->kick_work);
+		return;
+	}
+	/* Driver doesn't want device back. */
+	ccw_device_set_notoper(cdev);
+	PREPARE_WORK(&cdev->private->kick_work, ccw_device_do_unreg_rereg);
+	queue_work(ccw_device_work, &cdev->private->kick_work);
 }
 
 /*
@@ -386,8 +394,7 @@ ccw_device_done(struct ccw_device *cdev, int state)
 
 	if (cdev->private->flags.donotify) {
 		cdev->private->flags.donotify = 0;
-		PREPARE_WORK(&cdev->private->kick_work, ccw_device_oper_notify);
-		queue_work(ccw_device_notify_work, &cdev->private->kick_work);
+		ccw_device_oper_notify(cdev);
 	}
 	wake_up(&cdev->private->wait_q);
 
diff --git a/drivers/s390/cio/idset.c b/drivers/s390/cio/idset.c
index ef7bc0a125ef..cf8f24a4b5eb 100644
--- a/drivers/s390/cio/idset.c
+++ b/drivers/s390/cio/idset.c
@@ -5,7 +5,7 @@
  *    Author(s): Peter Oberparleiter <peter.oberparleiter@de.ibm.com>
  */
 
-#include <linux/slab.h>
+#include <linux/vmalloc.h>
 #include <linux/bitops.h>
 #include "idset.h"
 #include "css.h"
@@ -25,18 +25,18 @@ static struct idset *idset_new(int num_ssid, int num_id)
 {
 	struct idset *set;
 
-	set = kzalloc(sizeof(struct idset) + bitmap_size(num_ssid, num_id),
-		      GFP_KERNEL);
+	set = vmalloc(sizeof(struct idset) + bitmap_size(num_ssid, num_id));
 	if (set) {
 		set->num_ssid = num_ssid;
 		set->num_id = num_id;
+		memset(set->bitmap, 0, bitmap_size(num_ssid, num_id));
 	}
 	return set;
 }
 
 void idset_free(struct idset *set)
 {
-	kfree(set);
+	vfree(set);
 }
 
 void idset_clear(struct idset *set)
diff --git a/drivers/s390/cio/qdio_debug.h b/drivers/s390/cio/qdio_debug.h
index 8484b83698e1..5a4d85b829ad 100644
--- a/drivers/s390/cio/qdio_debug.h
+++ b/drivers/s390/cio/qdio_debug.h
@@ -61,18 +61,18 @@
 
 /* s390dbf views */
 #define QDIO_DBF_SETUP_LEN		8
-#define QDIO_DBF_SETUP_PAGES		4
+#define QDIO_DBF_SETUP_PAGES		8
 #define QDIO_DBF_SETUP_NR_AREAS		1
 
 #define QDIO_DBF_TRACE_LEN		8
 #define QDIO_DBF_TRACE_NR_AREAS		2
 
 #ifdef CONFIG_QDIO_DEBUG
-#define QDIO_DBF_TRACE_PAGES		16
+#define QDIO_DBF_TRACE_PAGES		32
 #define QDIO_DBF_SETUP_LEVEL		6
 #define QDIO_DBF_TRACE_LEVEL		4
 #else /* !CONFIG_QDIO_DEBUG */
-#define QDIO_DBF_TRACE_PAGES		4
+#define QDIO_DBF_TRACE_PAGES		8
 #define QDIO_DBF_SETUP_LEVEL		2
 #define QDIO_DBF_TRACE_LEVEL		2
 #endif /* CONFIG_QDIO_DEBUG */
diff --git a/drivers/s390/cio/qdio_main.c b/drivers/s390/cio/qdio_main.c
index d10c73cc1688..e6eabc853422 100644
--- a/drivers/s390/cio/qdio_main.c
+++ b/drivers/s390/cio/qdio_main.c
@@ -330,6 +330,7 @@ static int qdio_siga_output(struct qdio_q *q)
 	int cc;
 	u32 busy_bit;
 	u64 start_time = 0;
+	char dbf_text[15];
 
 	QDIO_DBF_TEXT5(0, trace, "sigaout");
 	QDIO_DBF_HEX5(0, trace, &q, sizeof(void *));
@@ -338,6 +339,9 @@ static int qdio_siga_output(struct qdio_q *q)
 again:
 	cc = qdio_do_siga_output(q, &busy_bit);
 	if (queue_type(q) == QDIO_IQDIO_QFMT && cc == 2 && busy_bit) {
+		sprintf(dbf_text, "bb%4x%2x", q->irq_ptr->schid.sch_no, q->nr);
+		QDIO_DBF_TEXT3(0, trace, dbf_text);
+
 		if (!start_time)
 			start_time = get_usecs();
 		else if ((get_usecs() - start_time) < QDIO_BUSY_BIT_PATIENCE)
@@ -748,16 +752,18 @@ static void qdio_kick_outbound_q(struct qdio_q *q)
 	rc = qdio_siga_output(q);
 	switch (rc) {
 	case 0:
-		/* went smooth this time, reset timestamp */
-		q->u.out.timestamp = 0;
-
 		/* TODO: improve error handling for CC=0 case */
 #ifdef CONFIG_QDIO_DEBUG
-		QDIO_DBF_TEXT3(0, trace, "cc2reslv");
-		sprintf(dbf_text, "%4x%2x%2x", q->irq_ptr->schid.sch_no, q->nr,
-			atomic_read(&q->u.out.busy_siga_counter));
-		QDIO_DBF_TEXT3(0, trace, dbf_text);
+		if (q->u.out.timestamp) {
+			QDIO_DBF_TEXT3(0, trace, "cc2reslv");
+			sprintf(dbf_text, "%4x%2x%2x", q->irq_ptr->schid.sch_no,
+				q->nr,
+				atomic_read(&q->u.out.busy_siga_counter));
+			QDIO_DBF_TEXT3(0, trace, dbf_text);
+		}
 #endif /* CONFIG_QDIO_DEBUG */
+		/* went smooth this time, reset timestamp */
+		q->u.out.timestamp = 0;
 		break;
 	/* cc=2 and busy bit */
 	case (2 | QDIO_ERROR_SIGA_BUSY):
@@ -1066,14 +1072,12 @@ void qdio_int_handler(struct ccw_device *cdev, unsigned long intparm,
 	if (IS_ERR(irb)) {
 		switch (PTR_ERR(irb)) {
 		case -EIO:
-			sprintf(dbf_text, "ierr%4x",
-				cdev->private->schid.sch_no);
+			sprintf(dbf_text, "ierr%4x", irq_ptr->schid.sch_no);
 			QDIO_DBF_TEXT2(1, setup, dbf_text);
 			qdio_int_error(cdev);
 			return;
 		case -ETIMEDOUT:
-			sprintf(dbf_text, "qtoh%4x",
-				cdev->private->schid.sch_no);
+			sprintf(dbf_text, "qtoh%4x", irq_ptr->schid.sch_no);
 			QDIO_DBF_TEXT2(1, setup, dbf_text);
 			qdio_int_error(cdev);
 			return;
@@ -1124,8 +1128,10 @@ void qdio_int_handler(struct ccw_device *cdev, unsigned long intparm,
 struct qdio_ssqd_desc *qdio_get_ssqd_desc(struct ccw_device *cdev)
 {
 	struct qdio_irq *irq_ptr;
+	char dbf_text[15];
 
-	QDIO_DBF_TEXT0(0, setup, "getssqd");
+	sprintf(dbf_text, "qssq%4x", cdev->private->schid.sch_no);
+	QDIO_DBF_TEXT0(0, setup, dbf_text);
 
 	irq_ptr = cdev->private->qdio_data;
 	if (!irq_ptr)
@@ -1149,14 +1155,13 @@ int qdio_cleanup(struct ccw_device *cdev, int how)
 	char dbf_text[15];
 	int rc;
 
+	sprintf(dbf_text, "qcln%4x", cdev->private->schid.sch_no);
+	QDIO_DBF_TEXT0(0, setup, dbf_text);
+
 	irq_ptr = cdev->private->qdio_data;
 	if (!irq_ptr)
 		return -ENODEV;
 
-	sprintf(dbf_text, "qcln%4x", irq_ptr->schid.sch_no);
-	QDIO_DBF_TEXT1(0, trace, dbf_text);
-	QDIO_DBF_TEXT0(0, setup, dbf_text);
-
 	rc = qdio_shutdown(cdev, how);
 	if (rc == 0)
 		rc = qdio_free(cdev);
@@ -1191,6 +1196,9 @@ int qdio_shutdown(struct ccw_device *cdev, int how)
 	unsigned long flags;
 	char dbf_text[15];
 
+	sprintf(dbf_text, "qshu%4x", cdev->private->schid.sch_no);
+	QDIO_DBF_TEXT0(0, setup, dbf_text);
+
 	irq_ptr = cdev->private->qdio_data;
 	if (!irq_ptr)
 		return -ENODEV;
@@ -1205,10 +1213,6 @@ int qdio_shutdown(struct ccw_device *cdev, int how)
 		return 0;
 	}
 
-	sprintf(dbf_text, "qsqs%4x", irq_ptr->schid.sch_no);
-	QDIO_DBF_TEXT1(0, trace, dbf_text);
-	QDIO_DBF_TEXT0(0, setup, dbf_text);
-
 	tiqdio_remove_input_queues(irq_ptr);
 	qdio_shutdown_queues(cdev);
 	qdio_shutdown_debug_entries(irq_ptr, cdev);
@@ -1247,7 +1251,6 @@ no_cleanup:
 
 	qdio_set_state(irq_ptr, QDIO_IRQ_STATE_INACTIVE);
 	mutex_unlock(&irq_ptr->setup_mutex);
-	module_put(THIS_MODULE);
 	if (rc)
 		return rc;
 	return 0;
@@ -1263,16 +1266,14 @@ int qdio_free(struct ccw_device *cdev)
 	struct qdio_irq *irq_ptr;
 	char dbf_text[15];
 
+	sprintf(dbf_text, "qfre%4x", cdev->private->schid.sch_no);
+	QDIO_DBF_TEXT0(0, setup, dbf_text);
+
 	irq_ptr = cdev->private->qdio_data;
 	if (!irq_ptr)
 		return -ENODEV;
 
 	mutex_lock(&irq_ptr->setup_mutex);
-
-	sprintf(dbf_text, "qfqs%4x", irq_ptr->schid.sch_no);
-	QDIO_DBF_TEXT1(0, trace, dbf_text);
-	QDIO_DBF_TEXT0(0, setup, dbf_text);
-
 	cdev->private->qdio_data = NULL;
 	mutex_unlock(&irq_ptr->setup_mutex);
 
@@ -1295,7 +1296,6 @@ int qdio_initialize(struct qdio_initialize *init_data)
 
 	sprintf(dbf_text, "qini%4x", init_data->cdev->private->schid.sch_no);
 	QDIO_DBF_TEXT0(0, setup, dbf_text);
-	QDIO_DBF_TEXT0(0, trace, dbf_text);
 
 	rc = qdio_allocate(init_data);
 	if (rc)
@@ -1319,7 +1319,6 @@ int qdio_allocate(struct qdio_initialize *init_data)
 
 	sprintf(dbf_text, "qalc%4x", init_data->cdev->private->schid.sch_no);
 	QDIO_DBF_TEXT0(0, setup, dbf_text);
-	QDIO_DBF_TEXT0(0, trace, dbf_text);
 
 	if ((init_data->no_input_qs && !init_data->input_handler) ||
 	    (init_data->no_output_qs && !init_data->output_handler))
@@ -1355,7 +1354,7 @@ int qdio_allocate(struct qdio_initialize *init_data)
 		goto out_rel;
 
 	/* qdr is used in ccw1.cda which is u32 */
-	irq_ptr->qdr = kzalloc(sizeof(struct qdr), GFP_KERNEL | GFP_DMA);
+	irq_ptr->qdr = (struct qdr *) get_zeroed_page(GFP_KERNEL | GFP_DMA);
 	if (!irq_ptr->qdr)
 		goto out_rel;
 	WARN_ON((unsigned long)irq_ptr->qdr & 0xfff);
@@ -1389,6 +1388,9 @@ int qdio_establish(struct qdio_initialize *init_data)
 	unsigned long saveflags;
 	int rc;
 
+	sprintf(dbf_text, "qest%4x", cdev->private->schid.sch_no);
+	QDIO_DBF_TEXT0(0, setup, dbf_text);
+
 	irq_ptr = cdev->private->qdio_data;
 	if (!irq_ptr)
 		return -ENODEV;
@@ -1396,13 +1398,6 @@ int qdio_establish(struct qdio_initialize *init_data)
 	if (cdev->private->state != DEV_STATE_ONLINE)
 		return -EINVAL;
 
-	if (!try_module_get(THIS_MODULE))
-		return -EINVAL;
-
-	sprintf(dbf_text, "qest%4x", cdev->private->schid.sch_no);
-	QDIO_DBF_TEXT0(0, setup, dbf_text);
-	QDIO_DBF_TEXT0(0, trace, dbf_text);
-
 	mutex_lock(&irq_ptr->setup_mutex);
 	qdio_setup_irq(init_data);
 
@@ -1472,6 +1467,9 @@ int qdio_activate(struct ccw_device *cdev)
 	unsigned long saveflags;
 	char dbf_text[20];
 
+	sprintf(dbf_text, "qact%4x", cdev->private->schid.sch_no);
+	QDIO_DBF_TEXT0(0, setup, dbf_text);
+
 	irq_ptr = cdev->private->qdio_data;
 	if (!irq_ptr)
 		return -ENODEV;
@@ -1485,10 +1483,6 @@ int qdio_activate(struct ccw_device *cdev)
 		goto out;
 	}
 
-	sprintf(dbf_text, "qact%4x", irq_ptr->schid.sch_no);
-	QDIO_DBF_TEXT2(0, setup, dbf_text);
-	QDIO_DBF_TEXT2(0, trace, dbf_text);
-
 	irq_ptr->ccw.cmd_code = irq_ptr->aqueue.cmd;
 	irq_ptr->ccw.flags = CCW_FLAG_SLI;
 	irq_ptr->ccw.count = irq_ptr->aqueue.count;
@@ -1663,7 +1657,7 @@ int do_QDIO(struct ccw_device *cdev, unsigned int callflags,
 #ifdef CONFIG_QDIO_DEBUG
 	char dbf_text[20];
 
-	sprintf(dbf_text, "doQD%04x", cdev->private->schid.sch_no);
+	sprintf(dbf_text, "doQD%4x", cdev->private->schid.sch_no);
 	QDIO_DBF_TEXT3(0, trace, dbf_text);
 #endif /* CONFIG_QDIO_DEBUG */
 
diff --git a/drivers/s390/cio/qdio_perf.c b/drivers/s390/cio/qdio_perf.c
index ea01b85b1cc9..ec5c4a414235 100644
--- a/drivers/s390/cio/qdio_perf.c
+++ b/drivers/s390/cio/qdio_perf.c
@@ -142,7 +142,7 @@ int __init qdio_setup_perf_stats(void)
 	return 0;
 }
 
-void __exit qdio_remove_perf_stats(void)
+void qdio_remove_perf_stats(void)
 {
 #ifdef CONFIG_PROC_FS
 	remove_proc_entry("qdio_perf", NULL);
diff --git a/drivers/s390/cio/qdio_setup.c b/drivers/s390/cio/qdio_setup.c
index f0923a8aceda..1679e2f91c94 100644
--- a/drivers/s390/cio/qdio_setup.c
+++ b/drivers/s390/cio/qdio_setup.c
@@ -165,7 +165,7 @@ static void setup_queues(struct qdio_irq *irq_ptr,
 	void **output_sbal_array = qdio_init->output_sbal_addr_array;
 	int i;
 
-	sprintf(dbf_text, "qfqs%4x", qdio_init->cdev->private->schid.sch_no);
+	sprintf(dbf_text, "qset%4x", qdio_init->cdev->private->schid.sch_no);
 	QDIO_DBF_TEXT0(0, setup, dbf_text);
 
 	for_each_input_queue(irq_ptr, q, i) {
@@ -285,7 +285,7 @@ void qdio_setup_ssqd_info(struct qdio_irq *irq_ptr)
 	rc = __get_ssqd_info(irq_ptr);
 	if (rc) {
 		QDIO_DBF_TEXT2(0, setup, "ssqdasig");
-		sprintf(dbf_text, "schno%x", irq_ptr->schid.sch_no);
+		sprintf(dbf_text, "schn%4x", irq_ptr->schid.sch_no);
 		QDIO_DBF_TEXT2(0, setup, dbf_text);
 		sprintf(dbf_text, "rc:%d", rc);
 		QDIO_DBF_TEXT2(0, setup, dbf_text);
@@ -325,7 +325,7 @@ void qdio_release_memory(struct qdio_irq *irq_ptr)
 			kmem_cache_free(qdio_q_cache, q);
 		}
 	}
-	kfree(irq_ptr->qdr);
+	free_page((unsigned long) irq_ptr->qdr);
 	free_page(irq_ptr->chsc_page);
 	free_page((unsigned long) irq_ptr);
 }
@@ -447,7 +447,7 @@ void qdio_print_subchannel_info(struct qdio_irq *irq_ptr,
 {
 	char s[80];
 
-	sprintf(s, "%s ", cdev->dev.bus_id);
+	sprintf(s, "%s sc:%x ", cdev->dev.bus_id, irq_ptr->schid.sch_no);
 
 	switch (irq_ptr->qib.qfmt) {
 	case QDIO_QETH_QFMT:
@@ -515,7 +515,7 @@ int __init qdio_setup_init(void)
 	return 0;
 }
 
-void __exit qdio_setup_exit(void)
+void qdio_setup_exit(void)
 {
 	kmem_cache_destroy(qdio_q_cache);
 }
diff --git a/drivers/s390/cio/qdio_thinint.c b/drivers/s390/cio/qdio_thinint.c
index 9291a771d812..ea7f61400267 100644
--- a/drivers/s390/cio/qdio_thinint.c
+++ b/drivers/s390/cio/qdio_thinint.c
@@ -113,7 +113,11 @@ void tiqdio_remove_input_queues(struct qdio_irq *irq_ptr)
 	struct qdio_q *q;
 	int i;
 
-	for_each_input_queue(irq_ptr, q, i) {
+	for (i = 0; i < irq_ptr->nr_input_qs; i++) {
+		q = irq_ptr->input_qs[i];
+		/* if establish triggered an error */
+		if (!q || !q->entry.prev || !q->entry.next)
+			continue;
 		list_del_rcu(&q->entry);
 		synchronize_rcu();
 	}
diff --git a/drivers/s390/kvm/Makefile b/drivers/s390/kvm/Makefile
index 4a5ec39f9ca6..0815690ac1e0 100644
--- a/drivers/s390/kvm/Makefile
+++ b/drivers/s390/kvm/Makefile
@@ -6,4 +6,4 @@
 # it under the terms of the GNU General Public License (version 2 only)
 # as published by the Free Software Foundation.
 
-obj-$(CONFIG_VIRTIO) += kvm_virtio.o
+obj-$(CONFIG_S390_GUEST) += kvm_virtio.o
diff --git a/drivers/s390/kvm/kvm_virtio.c b/drivers/s390/kvm/kvm_virtio.c
index 5ab34340919b..292b60da6dc7 100644
--- a/drivers/s390/kvm/kvm_virtio.c
+++ b/drivers/s390/kvm/kvm_virtio.c
@@ -15,6 +15,7 @@
 #include <linux/err.h>
 #include <linux/virtio.h>
 #include <linux/virtio_config.h>
+#include <linux/virtio_console.h>
 #include <linux/interrupt.h>
 #include <linux/virtio_ring.h>
 #include <linux/pfn.h>
@@ -87,16 +88,20 @@ static u32 kvm_get_features(struct virtio_device *vdev)
 	return features;
 }
 
-static void kvm_set_features(struct virtio_device *vdev, u32 features)
+static void kvm_finalize_features(struct virtio_device *vdev)
 {
-	unsigned int i;
+	unsigned int i, bits;
 	struct kvm_device_desc *desc = to_kvmdev(vdev)->desc;
 	/* Second half of bitmap is features we accept. */
 	u8 *out_features = kvm_vq_features(desc) + desc->feature_len;
 
+	/* Give virtio_ring a chance to accept features. */
+	vring_transport_features(vdev);
+
 	memset(out_features, 0, desc->feature_len);
-	for (i = 0; i < min(desc->feature_len * 8, 32); i++) {
-		if (features & (1 << i))
+	bits = min_t(unsigned, desc->feature_len, sizeof(vdev->features)) * 8;
+	for (i = 0; i < bits; i++) {
+		if (test_bit(i, vdev->features))
 			out_features[i / 8] |= (1 << (i % 8));
 	}
 }
@@ -222,7 +227,7 @@ static void kvm_del_vq(struct virtqueue *vq)
  */
 static struct virtio_config_ops kvm_vq_configspace_ops = {
 	.get_features = kvm_get_features,
-	.set_features = kvm_set_features,
+	.finalize_features = kvm_finalize_features,
 	.get = kvm_get,
 	.set = kvm_set,
 	.get_status = kvm_get_status,
@@ -333,6 +338,25 @@ static int __init kvm_devices_init(void)
 	return 0;
 }
 
+/* code for early console output with virtio_console */
+static __init int early_put_chars(u32 vtermno, const char *buf, int count)
+{
+	char scratch[17];
+	unsigned int len = count;
+
+	if (len > sizeof(scratch) - 1)
+		len = sizeof(scratch) - 1;
+	scratch[len] = '\0';
+	memcpy(scratch, buf, len);
+	kvm_hypercall1(KVM_S390_VIRTIO_NOTIFY, __pa(scratch));
+	return len;
+}
+
+void __init s390_virtio_console_init(void)
+{
+	virtio_cons_early_init(early_put_chars);
+}
+
 /*
  * We do this after core stuff, but before the drivers.
  */
diff --git a/drivers/s390/net/claw.c b/drivers/s390/net/claw.c
index a08b1682c8e8..e10ac9ab2d44 100644
--- a/drivers/s390/net/claw.c
+++ b/drivers/s390/net/claw.c
@@ -133,14 +133,14 @@ claw_register_debug_facility(void)
 static inline void
 claw_set_busy(struct net_device *dev)
 {
- ((struct claw_privbk *) dev->priv)->tbusy=1;
+ ((struct claw_privbk *)dev->ml_priv)->tbusy = 1;
  eieio();
 }
 
 static inline void
 claw_clear_busy(struct net_device *dev)
 {
-	clear_bit(0, &(((struct claw_privbk *) dev->priv)->tbusy));
+	clear_bit(0, &(((struct claw_privbk *) dev->ml_priv)->tbusy));
 	netif_wake_queue(dev);
 	eieio();
 }
@@ -149,20 +149,20 @@ static inline int
 claw_check_busy(struct net_device *dev)
 {
 	eieio();
-	return ((struct claw_privbk *) dev->priv)->tbusy;
+	return ((struct claw_privbk *) dev->ml_priv)->tbusy;
 }
 
 static inline void
 claw_setbit_busy(int nr,struct net_device *dev)
 {
 	netif_stop_queue(dev);
- 	set_bit(nr, (void *)&(((struct claw_privbk *)dev->priv)->tbusy));
+	set_bit(nr, (void *)&(((struct claw_privbk *)dev->ml_priv)->tbusy));
 }
 
 static inline void
 claw_clearbit_busy(int nr,struct net_device *dev)
 {
- 	clear_bit(nr,(void *)&(((struct claw_privbk *)dev->priv)->tbusy));
+	clear_bit(nr, (void *)&(((struct claw_privbk *)dev->ml_priv)->tbusy));
 	netif_wake_queue(dev);
 }
 
@@ -171,7 +171,7 @@ claw_test_and_setbit_busy(int nr,struct net_device *dev)
 {
 	netif_stop_queue(dev);
 	return test_and_set_bit(nr,
- 		(void *)&(((struct claw_privbk *) dev->priv)->tbusy));
+		(void *)&(((struct claw_privbk *) dev->ml_priv)->tbusy));
 }
 
 
@@ -271,6 +271,7 @@ claw_probe(struct ccwgroup_device *cgdev)
 	if (!get_device(&cgdev->dev))
 		return -ENODEV;
 	privptr = kzalloc(sizeof(struct claw_privbk), GFP_KERNEL);
+	cgdev->dev.driver_data = privptr;
 	if (privptr == NULL) {
 		probe_error(cgdev);
 		put_device(&cgdev->dev);
@@ -305,7 +306,6 @@ claw_probe(struct ccwgroup_device *cgdev)
 	privptr->p_env->p_priv = privptr;
         cgdev->cdev[0]->handler = claw_irq_handler;
 	cgdev->cdev[1]->handler = claw_irq_handler;
-	cgdev->dev.driver_data = privptr;
 	CLAW_DBF_TEXT(2, setup, "prbext 0");
 
         return 0;
@@ -319,7 +319,7 @@ static int
 claw_tx(struct sk_buff *skb, struct net_device *dev)
 {
         int             rc;
-        struct claw_privbk *privptr=dev->priv;
+	struct claw_privbk *privptr = dev->ml_priv;
 	unsigned long saveflags;
         struct chbk *p_ch;
 
@@ -404,7 +404,7 @@ claw_pack_skb(struct claw_privbk *privptr)
 static int
 claw_change_mtu(struct net_device *dev, int new_mtu)
 {
-	struct claw_privbk  *privptr=dev->priv;
+	struct claw_privbk *privptr = dev->ml_priv;
 	int buff_size;
 	CLAW_DBF_TEXT(4, trace, "setmtu");
 	buff_size = privptr->p_env->write_size;
@@ -434,7 +434,7 @@ claw_open(struct net_device *dev)
         struct ccwbk *p_buf;
 
 	CLAW_DBF_TEXT(4, trace, "open");
-	privptr = (struct claw_privbk *)dev->priv;
+	privptr = (struct claw_privbk *)dev->ml_priv;
         /*   allocate and initialize CCW blocks */
 	if (privptr->buffs_alloc == 0) {
 	        rc=init_ccw_bk(dev);
@@ -780,7 +780,7 @@ claw_irq_tasklet ( unsigned long data )
 	p_ch = (struct chbk *) data;
         dev = (struct net_device *)p_ch->ndev;
 	CLAW_DBF_TEXT(4, trace, "IRQtask");
-        privptr = (struct claw_privbk *) dev->priv;
+	privptr = (struct claw_privbk *)dev->ml_priv;
         unpack_read(dev);
         clear_bit(CLAW_BH_ACTIVE, (void *)&p_ch->flag_a);
 	CLAW_DBF_TEXT(4, trace, "TskletXt");
@@ -805,7 +805,7 @@ claw_release(struct net_device *dev)
 
 	if (!dev)
                 return 0;
-        privptr = (struct claw_privbk *) dev->priv;
+	privptr = (struct claw_privbk *)dev->ml_priv;
         if (!privptr)
                 return 0;
 	CLAW_DBF_TEXT(4, trace, "release");
@@ -960,7 +960,7 @@ claw_write_next ( struct chbk * p_ch )
         if (p_ch->claw_state == CLAW_STOP)
                 return;
         dev = (struct net_device *) p_ch->ndev;
-	privptr = (struct claw_privbk *) dev->priv;
+	privptr = (struct claw_privbk *) dev->ml_priv;
         claw_free_wrt_buf( dev );
 	if ((privptr->write_free_count > 0) &&
 	    !skb_queue_empty(&p_ch->collect_queue)) {
@@ -1042,7 +1042,7 @@ add_claw_reads(struct net_device *dev, struct ccwbk* p_first,
         struct ccw1  temp_ccw;
         struct endccw * p_end;
 	CLAW_DBF_TEXT(4, trace, "addreads");
-        privptr = dev->priv;
+	privptr = dev->ml_priv;
         p_end = privptr->p_end_ccw;
 
         /* first CCW and last CCW contains a new set of read channel programs
@@ -1212,7 +1212,7 @@ find_link(struct net_device *dev, char *host_name, char *ws_name )
 	int    rc=0;
 
 	CLAW_DBF_TEXT(2, setup, "findlink");
-        privptr=dev->priv;
+	privptr = dev->ml_priv;
         p_env=privptr->p_env;
 	switch (p_env->packing)
 	{
@@ -1264,7 +1264,7 @@ claw_hw_tx(struct sk_buff *skb, struct net_device *dev, long linkid)
 	struct chbk			*ch;
 
 	CLAW_DBF_TEXT(4, trace, "hw_tx");
-        privptr = (struct claw_privbk *) (dev->priv);
+	privptr = (struct claw_privbk *)(dev->ml_priv);
         p_ch=(struct chbk *)&privptr->channel[WRITE];
 	p_env =privptr->p_env;
 	claw_free_wrt_buf(dev);	/* Clean up free chain if posible */
@@ -1483,8 +1483,8 @@ init_ccw_bk(struct net_device *dev)
 	struct ccwbk*p_last_CCWB;
 	struct ccwbk*p_first_CCWB;
         struct endccw *p_endccw=NULL;
-        addr_t  real_address;
-        struct claw_privbk *privptr=dev->priv;
+	addr_t  real_address;
+	struct claw_privbk *privptr = dev->ml_priv;
         struct clawh *pClawH=NULL;
         addr_t   real_TIC_address;
         int i,j;
@@ -1960,19 +1960,16 @@ init_ccw_bk(struct net_device *dev)
 static void
 probe_error( struct ccwgroup_device *cgdev)
 {
-  struct claw_privbk *privptr;
+	struct claw_privbk *privptr;
 
 	CLAW_DBF_TEXT(4, trace, "proberr");
-        privptr=(struct claw_privbk *)cgdev->dev.driver_data;
-	if (privptr!=NULL) {
+	privptr = (struct claw_privbk *) cgdev->dev.driver_data;
+	if (privptr != NULL) {
+		cgdev->dev.driver_data = NULL;
 		kfree(privptr->p_env);
-		privptr->p_env=NULL;
-                kfree(privptr->p_mtc_envelope);
-               	privptr->p_mtc_envelope=NULL;
-                kfree(privptr);
-                privptr=NULL;
-        }
-        return;
+		kfree(privptr->p_mtc_envelope);
+		kfree(privptr);
+	}
 }    /*    probe_error    */
 
 /*-------------------------------------------------------------------*
@@ -2000,7 +1997,7 @@ claw_process_control( struct net_device *dev, struct ccwbk * p_ccw)
 	CLAW_DBF_TEXT(2, setup, "clw_cntl");
         udelay(1000);  /* Wait a ms for the control packets to
 			*catch up to each other */
-        privptr=dev->priv;
+	privptr = dev->ml_priv;
         p_env=privptr->p_env;
 	tdev = &privptr->channel[READ].cdev->dev;
 	memcpy( &temp_host_name, p_env->host_name, 8);
@@ -2278,7 +2275,7 @@ claw_send_control(struct net_device *dev, __u8 type, __u8 link,
         struct sk_buff 			*skb;
 
 	CLAW_DBF_TEXT(2, setup, "sndcntl");
-        privptr=dev->priv;
+	privptr = dev->ml_priv;
         p_ctl=(struct clawctl *)&privptr->ctl_bk;
 
         p_ctl->command=type;
@@ -2348,7 +2345,7 @@ static int
 claw_snd_conn_req(struct net_device *dev, __u8 link)
 {
         int                rc;
-        struct claw_privbk *privptr=dev->priv;
+	struct claw_privbk *privptr = dev->ml_priv;
         struct clawctl 	   *p_ctl;
 
 	CLAW_DBF_TEXT(2, setup, "snd_conn");
@@ -2408,7 +2405,7 @@ claw_snd_sys_validate_rsp(struct net_device *dev,
         int    rc;
 
 	CLAW_DBF_TEXT(2, setup, "chkresp");
-        privptr = dev->priv;
+	privptr = dev->ml_priv;
         p_env=privptr->p_env;
         rc=claw_send_control(dev, SYSTEM_VALIDATE_RESPONSE,
 		p_ctl->linkid,
@@ -2446,7 +2443,7 @@ net_device_stats *claw_stats(struct net_device *dev)
         struct claw_privbk *privptr;
 
 	CLAW_DBF_TEXT(4, trace, "stats");
-        privptr = dev->priv;
+	privptr = dev->ml_priv;
         return &privptr->stats;
 }     /*   end of claw_stats   */
 
@@ -2482,7 +2479,7 @@ unpack_read(struct net_device *dev )
         p_last_ccw=NULL;
 	p_packh=NULL;
 	p_packd=NULL;
-        privptr=dev->priv;
+	privptr = dev->ml_priv;
 
 	p_dev = &privptr->channel[READ].cdev->dev;
 	p_env = privptr->p_env;
@@ -2651,7 +2648,7 @@ claw_strt_read (struct net_device *dev, int lock )
         int        rc = 0;
         __u32      parm;
         unsigned long  saveflags = 0;
-        struct claw_privbk *privptr=dev->priv;
+	struct claw_privbk *privptr = dev->ml_priv;
         struct ccwbk*p_ccwbk;
         struct chbk *p_ch;
         struct clawh *p_clawh;
@@ -2708,7 +2705,7 @@ claw_strt_out_IO( struct net_device *dev )
 	if (!dev) {
 		return;
 	}
-        privptr=(struct claw_privbk *)dev->priv;
+	privptr = (struct claw_privbk *)dev->ml_priv;
         p_ch=&privptr->channel[WRITE];
 
 	CLAW_DBF_TEXT(4, trace, "strt_io");
@@ -2741,7 +2738,7 @@ static void
 claw_free_wrt_buf( struct net_device *dev )
 {
 
-        struct claw_privbk *privptr=(struct claw_privbk *)dev->priv;
+	struct claw_privbk *privptr = (struct claw_privbk *)dev->ml_priv;
         struct ccwbk*p_first_ccw;
 	struct ccwbk*p_last_ccw;
 	struct ccwbk*p_this_ccw;
@@ -2798,13 +2795,13 @@ claw_free_netdevice(struct net_device * dev, int free_dev)
 	if (!dev)
 		return;
 	CLAW_DBF_TEXT_(2, setup, "%s", dev->name);
-	privptr = dev->priv;
+	privptr = dev->ml_priv;
 	if (dev->flags & IFF_RUNNING)
 		claw_release(dev);
 	if (privptr) {
 		privptr->channel[READ].ndev = NULL;  /* say it's free */
 	}
-	dev->priv=NULL;
+	dev->ml_priv = NULL;
 #ifdef MODULE
 	if (free_dev) {
 		free_netdev(dev);
@@ -2921,7 +2918,7 @@ claw_new_device(struct ccwgroup_device *cgdev)
 		printk(KERN_WARNING "%s:alloc_netdev failed\n",__func__);
 		goto out;
 	}
-	dev->priv = privptr;
+	dev->ml_priv = privptr;
 	cgdev->dev.driver_data = privptr;
         cgdev->cdev[READ]->dev.driver_data = privptr;
         cgdev->cdev[WRITE]->dev.driver_data = privptr;
@@ -3002,7 +2999,7 @@ claw_shutdown_device(struct ccwgroup_device *cgdev)
 			ret = claw_release(ndev);
 		ndev->flags &=~IFF_RUNNING;
 		unregister_netdev(ndev);
-		ndev->priv = NULL;  /* cgdev data, not ndev's to free */
+		ndev->ml_priv = NULL;  /* cgdev data, not ndev's to free */
 		claw_free_netdevice(ndev, 1);
 		priv->channel[READ].ndev = NULL;
 		priv->channel[WRITE].ndev = NULL;
diff --git a/drivers/s390/net/ctcm_fsms.c b/drivers/s390/net/ctcm_fsms.c
index 0b4e6253abe4..42776550acfd 100644
--- a/drivers/s390/net/ctcm_fsms.c
+++ b/drivers/s390/net/ctcm_fsms.c
@@ -245,7 +245,7 @@ static void chx_txdone(fsm_instance *fi, int event, void *arg)
 {
 	struct channel *ch = arg;
 	struct net_device *dev = ch->netdev;
-	struct ctcm_priv *priv = dev->priv;
+	struct ctcm_priv *priv = dev->ml_priv;
 	struct sk_buff *skb;
 	int first = 1;
 	int i;
@@ -336,7 +336,7 @@ void ctcm_chx_txidle(fsm_instance *fi, int event, void *arg)
 {
 	struct channel *ch = arg;
 	struct net_device *dev = ch->netdev;
-	struct ctcm_priv *priv = dev->priv;
+	struct ctcm_priv *priv = dev->ml_priv;
 
 	CTCM_PR_DEBUG("%s(%s): %s\n", __func__, ch->id, dev->name);
 
@@ -357,7 +357,7 @@ static void chx_rx(fsm_instance *fi, int event, void *arg)
 {
 	struct channel *ch = arg;
 	struct net_device *dev = ch->netdev;
-	struct ctcm_priv *priv = dev->priv;
+	struct ctcm_priv *priv = dev->ml_priv;
 	int len = ch->max_bufsize - ch->irb->scsw.cmd.count;
 	struct sk_buff *skb = ch->trans_skb;
 	__u16 block_len = *((__u16 *)skb->data);
@@ -459,7 +459,7 @@ static void chx_firstio(fsm_instance *fi, int event, void *arg)
 			chx_rxidle(fi, event, arg);
 		} else {
 			struct net_device *dev = ch->netdev;
-			struct ctcm_priv *priv = dev->priv;
+			struct ctcm_priv *priv = dev->ml_priv;
 			fsm_newstate(fi, CTC_STATE_TXIDLE);
 			fsm_event(priv->fsm, DEV_EVENT_TXUP, dev);
 		}
@@ -496,7 +496,7 @@ static void chx_firstio(fsm_instance *fi, int event, void *arg)
 	if ((CHANNEL_DIRECTION(ch->flags) == READ) &&
 	    (ch->protocol == CTCM_PROTO_S390)) {
 		struct net_device *dev = ch->netdev;
-		struct ctcm_priv *priv = dev->priv;
+		struct ctcm_priv *priv = dev->ml_priv;
 		fsm_event(priv->fsm, DEV_EVENT_RXUP, dev);
 	}
 }
@@ -514,7 +514,7 @@ static void chx_rxidle(fsm_instance *fi, int event, void *arg)
 {
 	struct channel *ch = arg;
 	struct net_device *dev = ch->netdev;
-	struct ctcm_priv *priv = dev->priv;
+	struct ctcm_priv *priv = dev->ml_priv;
 	__u16 buflen;
 	int rc;
 
@@ -699,7 +699,7 @@ static void ctcm_chx_cleanup(fsm_instance *fi, int state,
 		struct channel *ch)
 {
 	struct net_device *dev = ch->netdev;
-	struct ctcm_priv *priv = dev->priv;
+	struct ctcm_priv *priv = dev->ml_priv;
 
 	CTCM_DBF_TEXT_(SETUP, CTC_DBF_NOTICE,
 			"%s(%s): %s[%d]\n",
@@ -784,7 +784,7 @@ static void ctcm_chx_setuperr(fsm_instance *fi, int event, void *arg)
 {
 	struct channel *ch = arg;
 	struct net_device *dev = ch->netdev;
-	struct ctcm_priv *priv = dev->priv;
+	struct ctcm_priv *priv = dev->ml_priv;
 
 	/*
 	 * Special case: Got UC_RCRESET on setmode.
@@ -874,7 +874,7 @@ static void ctcm_chx_rxiniterr(fsm_instance *fi, int event, void *arg)
 {
 	struct channel *ch = arg;
 	struct net_device *dev = ch->netdev;
-	struct ctcm_priv *priv = dev->priv;
+	struct ctcm_priv *priv = dev->ml_priv;
 
 	if (event == CTC_EVENT_TIMER) {
 		if (!IS_MPCDEV(dev))
@@ -902,7 +902,7 @@ static void ctcm_chx_rxinitfail(fsm_instance *fi, int event, void *arg)
 {
 	struct channel *ch = arg;
 	struct net_device *dev = ch->netdev;
-	struct ctcm_priv *priv = dev->priv;
+	struct ctcm_priv *priv = dev->ml_priv;
 
 	CTCM_DBF_TEXT_(ERROR, CTC_DBF_ERROR,
 			"%s(%s): RX %s busy, init. fail",
@@ -923,7 +923,7 @@ static void ctcm_chx_rxdisc(fsm_instance *fi, int event, void *arg)
 	struct channel *ch = arg;
 	struct channel *ch2;
 	struct net_device *dev = ch->netdev;
-	struct ctcm_priv *priv = dev->priv;
+	struct ctcm_priv *priv = dev->ml_priv;
 
 	CTCM_DBF_TEXT_(TRACE, CTC_DBF_NOTICE,
 			"%s: %s: remote disconnect - re-init ...",
@@ -954,7 +954,7 @@ static void ctcm_chx_txiniterr(fsm_instance *fi, int event, void *arg)
 {
 	struct channel *ch = arg;
 	struct net_device *dev = ch->netdev;
-	struct ctcm_priv *priv = dev->priv;
+	struct ctcm_priv *priv = dev->ml_priv;
 
 	if (event == CTC_EVENT_TIMER) {
 		fsm_deltimer(&ch->timer);
@@ -984,7 +984,7 @@ static void ctcm_chx_txretry(fsm_instance *fi, int event, void *arg)
 {
 	struct channel *ch = arg;
 	struct net_device *dev = ch->netdev;
-	struct ctcm_priv *priv = dev->priv;
+	struct ctcm_priv *priv = dev->ml_priv;
 	struct sk_buff *skb;
 
 	CTCM_PR_DEBUG("Enter: %s: cp=%i ch=0x%p id=%s\n",
@@ -1057,7 +1057,7 @@ static void ctcm_chx_iofatal(fsm_instance *fi, int event, void *arg)
 {
 	struct channel *ch = arg;
 	struct net_device *dev = ch->netdev;
-	struct ctcm_priv *priv = dev->priv;
+	struct ctcm_priv *priv = dev->ml_priv;
 	int rd = CHANNEL_DIRECTION(ch->flags);
 
 	fsm_deltimer(&ch->timer);
@@ -1207,7 +1207,7 @@ static void ctcmpc_chx_txdone(fsm_instance *fi, int event, void *arg)
 {
 	struct channel		*ch = arg;
 	struct net_device	*dev = ch->netdev;
-	struct ctcm_priv	*priv = dev->priv;
+	struct ctcm_priv	*priv = dev->ml_priv;
 	struct mpc_group	*grp = priv->mpcg;
 	struct sk_buff		*skb;
 	int		first = 1;
@@ -1368,7 +1368,7 @@ static void ctcmpc_chx_rx(fsm_instance *fi, int event, void *arg)
 {
 	struct channel		*ch = arg;
 	struct net_device	*dev = ch->netdev;
-	struct ctcm_priv	*priv = dev->priv;
+	struct ctcm_priv	*priv = dev->ml_priv;
 	struct mpc_group	*grp = priv->mpcg;
 	struct sk_buff		*skb = ch->trans_skb;
 	struct sk_buff		*new_skb;
@@ -1471,7 +1471,7 @@ static void ctcmpc_chx_firstio(fsm_instance *fi, int event, void *arg)
 {
 	struct channel		*ch = arg;
 	struct net_device	*dev = ch->netdev;
-	struct ctcm_priv	*priv = dev->priv;
+	struct ctcm_priv	*priv = dev->ml_priv;
 	struct mpc_group	*gptr = priv->mpcg;
 
 	CTCM_PR_DEBUG("Enter %s: id=%s, ch=0x%p\n",
@@ -1525,7 +1525,7 @@ void ctcmpc_chx_rxidle(fsm_instance *fi, int event, void *arg)
 {
 	struct channel *ch = arg;
 	struct net_device *dev = ch->netdev;
-	struct ctcm_priv  *priv = dev->priv;
+	struct ctcm_priv  *priv = dev->ml_priv;
 	struct mpc_group  *grp = priv->mpcg;
 	int rc;
 	unsigned long saveflags = 0;	/* avoids compiler warning */
@@ -1580,7 +1580,7 @@ static void ctcmpc_chx_attn(fsm_instance *fsm, int event, void *arg)
 {
 	struct channel	  *ch     = arg;
 	struct net_device *dev    = ch->netdev;
-	struct ctcm_priv  *priv   = dev->priv;
+	struct ctcm_priv  *priv   = dev->ml_priv;
 	struct mpc_group  *grp = priv->mpcg;
 
 	CTCM_PR_DEBUG("%s(%s): %s(ch=0x%p), cp=%i, ChStat:%s, GrpStat:%s\n",
@@ -1639,7 +1639,7 @@ static void ctcmpc_chx_attnbusy(fsm_instance *fsm, int event, void *arg)
 {
 	struct channel	  *ch     = arg;
 	struct net_device *dev    = ch->netdev;
-	struct ctcm_priv  *priv   = dev->priv;
+	struct ctcm_priv  *priv   = dev->ml_priv;
 	struct mpc_group  *grp    = priv->mpcg;
 
 	CTCM_PR_DEBUG("%s(%s): %s\n  ChState:%s GrpState:%s\n",
@@ -1724,7 +1724,7 @@ static void ctcmpc_chx_resend(fsm_instance *fsm, int event, void *arg)
 {
 	struct channel	   *ch	   = arg;
 	struct net_device  *dev    = ch->netdev;
-	struct ctcm_priv   *priv   = dev->priv;
+	struct ctcm_priv   *priv   = dev->ml_priv;
 	struct mpc_group   *grp    = priv->mpcg;
 
 	fsm_event(grp->fsm, MPCG_EVENT_XID0DO, ch);
@@ -1740,7 +1740,7 @@ static void ctcmpc_chx_send_sweep(fsm_instance *fsm, int event, void *arg)
 {
 	struct channel *ach = arg;
 	struct net_device *dev = ach->netdev;
-	struct ctcm_priv *priv = dev->priv;
+	struct ctcm_priv *priv = dev->ml_priv;
 	struct mpc_group *grp = priv->mpcg;
 	struct channel *wch = priv->channel[WRITE];
 	struct channel *rch = priv->channel[READ];
@@ -2050,7 +2050,7 @@ int mpc_ch_fsm_len = ARRAY_SIZE(ctcmpc_ch_fsm);
 static void dev_action_start(fsm_instance *fi, int event, void *arg)
 {
 	struct net_device *dev = arg;
-	struct ctcm_priv *priv = dev->priv;
+	struct ctcm_priv *priv = dev->ml_priv;
 	int direction;
 
 	CTCMY_DBF_DEV_NAME(SETUP, dev, "");
@@ -2076,7 +2076,7 @@ static void dev_action_stop(fsm_instance *fi, int event, void *arg)
 {
 	int direction;
 	struct net_device *dev = arg;
-	struct ctcm_priv *priv = dev->priv;
+	struct ctcm_priv *priv = dev->ml_priv;
 
 	CTCMY_DBF_DEV_NAME(SETUP, dev, "");
 
@@ -2096,7 +2096,7 @@ static void dev_action_restart(fsm_instance *fi, int event, void *arg)
 {
 	int restart_timer;
 	struct net_device *dev = arg;
-	struct ctcm_priv *priv = dev->priv;
+	struct ctcm_priv *priv = dev->ml_priv;
 
 	CTCMY_DBF_DEV_NAME(TRACE, dev, "");
 
@@ -2133,12 +2133,12 @@ static void dev_action_restart(fsm_instance *fi, int event, void *arg)
 static void dev_action_chup(fsm_instance *fi, int event, void *arg)
 {
 	struct net_device *dev = arg;
-	struct ctcm_priv *priv = dev->priv;
+	struct ctcm_priv *priv = dev->ml_priv;
 	int dev_stat = fsm_getstate(fi);
 
 	CTCM_DBF_TEXT_(SETUP, CTC_DBF_NOTICE,
 			"%s(%s): priv = %p [%d,%d]\n ",	CTCM_FUNTAIL,
-				dev->name, dev->priv, dev_stat, event);
+				dev->name, dev->ml_priv, dev_stat, event);
 
 	switch (fsm_getstate(fi)) {
 	case DEV_STATE_STARTWAIT_RXTX:
@@ -2195,7 +2195,7 @@ static void dev_action_chdown(fsm_instance *fi, int event, void *arg)
 {
 
 	struct net_device *dev = arg;
-	struct ctcm_priv *priv = dev->priv;
+	struct ctcm_priv *priv = dev->ml_priv;
 
 	CTCMY_DBF_DEV_NAME(SETUP, dev, "");
 
diff --git a/drivers/s390/net/ctcm_main.c b/drivers/s390/net/ctcm_main.c
index 126a3ebb8ab2..b11fec24c7d2 100644
--- a/drivers/s390/net/ctcm_main.c
+++ b/drivers/s390/net/ctcm_main.c
@@ -69,7 +69,7 @@ struct channel *channels;
 void ctcm_unpack_skb(struct channel *ch, struct sk_buff *pskb)
 {
 	struct net_device *dev = ch->netdev;
-	struct ctcm_priv *priv = dev->priv;
+	struct ctcm_priv *priv = dev->ml_priv;
 	__u16 len = *((__u16 *) pskb->data);
 
 	skb_put(pskb, 2 + LL_HEADER_LENGTH);
@@ -414,7 +414,7 @@ int ctcm_ch_alloc_buffer(struct channel *ch)
  */
 int ctcm_open(struct net_device *dev)
 {
-	struct ctcm_priv *priv = dev->priv;
+	struct ctcm_priv *priv = dev->ml_priv;
 
 	CTCMY_DBF_DEV_NAME(SETUP, dev, "");
 	if (!IS_MPC(priv))
@@ -432,7 +432,7 @@ int ctcm_open(struct net_device *dev)
  */
 int ctcm_close(struct net_device *dev)
 {
-	struct ctcm_priv *priv = dev->priv;
+	struct ctcm_priv *priv = dev->ml_priv;
 
 	CTCMY_DBF_DEV_NAME(SETUP, dev, "");
 	if (!IS_MPC(priv))
@@ -573,7 +573,7 @@ static int ctcm_transmit_skb(struct channel *ch, struct sk_buff *skb)
 		skb_pull(skb, LL_HEADER_LENGTH + 2);
 	} else if (ccw_idx == 0) {
 		struct net_device *dev = ch->netdev;
-		struct ctcm_priv *priv = dev->priv;
+		struct ctcm_priv *priv = dev->ml_priv;
 		priv->stats.tx_packets++;
 		priv->stats.tx_bytes += skb->len - LL_HEADER_LENGTH;
 	}
@@ -592,7 +592,7 @@ static void ctcmpc_send_sweep_req(struct channel *rch)
 	struct channel *ch;
 	/* int rc = 0; */
 
-	priv = dev->priv;
+	priv = dev->ml_priv;
 	grp = priv->mpcg;
 	ch = priv->channel[WRITE];
 
@@ -652,7 +652,7 @@ static int ctcmpc_transmit_skb(struct channel *ch, struct sk_buff *skb)
 {
 	struct pdu *p_header;
 	struct net_device *dev = ch->netdev;
-	struct ctcm_priv *priv = dev->priv;
+	struct ctcm_priv *priv = dev->ml_priv;
 	struct mpc_group *grp = priv->mpcg;
 	struct th_header *header;
 	struct sk_buff *nskb;
@@ -867,7 +867,7 @@ done:
 /* first merge version - leaving both functions separated */
 static int ctcm_tx(struct sk_buff *skb, struct net_device *dev)
 {
-	struct ctcm_priv *priv = dev->priv;
+	struct ctcm_priv *priv = dev->ml_priv;
 
 	if (skb == NULL) {
 		CTCM_DBF_TEXT_(ERROR, CTC_DBF_ERROR,
@@ -911,7 +911,7 @@ static int ctcm_tx(struct sk_buff *skb, struct net_device *dev)
 static int ctcmpc_tx(struct sk_buff *skb, struct net_device *dev)
 {
 	int len = 0;
-	struct ctcm_priv *priv = dev->priv;
+	struct ctcm_priv *priv = dev->ml_priv;
 	struct mpc_group *grp  = priv->mpcg;
 	struct sk_buff *newskb = NULL;
 
@@ -1025,7 +1025,7 @@ static int ctcm_change_mtu(struct net_device *dev, int new_mtu)
 	if (new_mtu < 576 || new_mtu > 65527)
 		return -EINVAL;
 
-	priv = dev->priv;
+	priv = dev->ml_priv;
 	max_bufsize = priv->channel[READ]->max_bufsize;
 
 	if (IS_MPC(priv)) {
@@ -1050,7 +1050,7 @@ static int ctcm_change_mtu(struct net_device *dev, int new_mtu)
  */
 static struct net_device_stats *ctcm_stats(struct net_device *dev)
 {
-	return &((struct ctcm_priv *)dev->priv)->stats;
+	return &((struct ctcm_priv *)dev->ml_priv)->stats;
 }
 
 static void ctcm_free_netdevice(struct net_device *dev)
@@ -1060,7 +1060,7 @@ static void ctcm_free_netdevice(struct net_device *dev)
 
 	CTCM_DBF_TEXT_(SETUP, CTC_DBF_INFO,
 			"%s(%s)", CTCM_FUNTAIL, dev->name);
-	priv = dev->priv;
+	priv = dev->ml_priv;
 	if (priv) {
 		grp = priv->mpcg;
 		if (grp) {
@@ -1125,7 +1125,7 @@ static struct net_device *ctcm_init_netdevice(struct ctcm_priv *priv)
 			CTCM_FUNTAIL);
 		return NULL;
 	}
-	dev->priv = priv;
+	dev->ml_priv = priv;
 	priv->fsm = init_fsm("ctcmdev", dev_state_names, dev_event_names,
 				CTCM_NR_DEV_STATES, CTCM_NR_DEV_EVENTS,
 				dev_fsm, dev_fsm_len, GFP_KERNEL);
diff --git a/drivers/s390/net/ctcm_main.h b/drivers/s390/net/ctcm_main.h
index a72e0feeb27f..8e10ee86a5ee 100644
--- a/drivers/s390/net/ctcm_main.h
+++ b/drivers/s390/net/ctcm_main.h
@@ -229,14 +229,14 @@ void ctcm_remove_files(struct device *dev);
  */
 static inline void ctcm_clear_busy_do(struct net_device *dev)
 {
-	clear_bit(0, &(((struct ctcm_priv *)dev->priv)->tbusy));
+	clear_bit(0, &(((struct ctcm_priv *)dev->ml_priv)->tbusy));
 	netif_wake_queue(dev);
 }
 
 static inline void ctcm_clear_busy(struct net_device *dev)
 {
 	struct mpc_group *grp;
-	grp = ((struct ctcm_priv *)dev->priv)->mpcg;
+	grp = ((struct ctcm_priv *)dev->ml_priv)->mpcg;
 
 	if (!(grp && grp->in_sweep))
 		ctcm_clear_busy_do(dev);
@@ -246,7 +246,8 @@ static inline void ctcm_clear_busy(struct net_device *dev)
 static inline int ctcm_test_and_set_busy(struct net_device *dev)
 {
 	netif_stop_queue(dev);
-	return test_and_set_bit(0, &(((struct ctcm_priv *)dev->priv)->tbusy));
+	return test_and_set_bit(0,
+			&(((struct ctcm_priv *)dev->ml_priv)->tbusy));
 }
 
 extern int loglevel;
@@ -292,7 +293,7 @@ struct mpc_group *ctcmpc_init_mpc_group(struct ctcm_priv *priv);
 #define IS_MPC(p) ((p)->protocol == CTCM_PROTO_MPC)
 
 /* test if struct ctcm_priv of struct net_device has MPC protocol setting */
-#define IS_MPCDEV(d) IS_MPC((struct ctcm_priv *)d->priv)
+#define IS_MPCDEV(dev) IS_MPC((struct ctcm_priv *)dev->ml_priv)
 
 static inline gfp_t gfp_type(void)
 {
diff --git a/drivers/s390/net/ctcm_mpc.c b/drivers/s390/net/ctcm_mpc.c
index 49ae1cd25caa..cbe470493bf0 100644
--- a/drivers/s390/net/ctcm_mpc.c
+++ b/drivers/s390/net/ctcm_mpc.c
@@ -19,7 +19,6 @@
 #undef DEBUGDATA
 #undef DEBUGCCW
 
-#include <linux/version.h>
 #include <linux/module.h>
 #include <linux/init.h>
 #include <linux/kernel.h>
@@ -313,10 +312,10 @@ static struct net_device *ctcmpc_get_dev(int port_num)
 					CTCM_FUNTAIL, device);
 		return NULL;
 	}
-	priv = dev->priv;
+	priv = dev->ml_priv;
 	if (priv == NULL) {
 		CTCM_DBF_TEXT_(MPC_ERROR, CTC_DBF_ERROR,
-			"%s(%s): dev->priv is NULL",
+			"%s(%s): dev->ml_priv is NULL",
 					CTCM_FUNTAIL, device);
 		return NULL;
 	}
@@ -345,7 +344,7 @@ int ctc_mpc_alloc_channel(int port_num, void (*callback)(int, int))
 	dev = ctcmpc_get_dev(port_num);
 	if (dev == NULL)
 		return 1;
-	priv = dev->priv;
+	priv = dev->ml_priv;
 	grp = priv->mpcg;
 
 	grp->allochanfunc = callback;
@@ -417,7 +416,7 @@ void ctc_mpc_establish_connectivity(int port_num,
 	dev = ctcmpc_get_dev(port_num);
 	if (dev == NULL)
 		return;
-	priv = dev->priv;
+	priv = dev->ml_priv;
 	grp = priv->mpcg;
 	rch = priv->channel[READ];
 	wch = priv->channel[WRITE];
@@ -535,7 +534,7 @@ void ctc_mpc_dealloc_ch(int port_num)
 	dev = ctcmpc_get_dev(port_num);
 	if (dev == NULL)
 		return;
-	priv = dev->priv;
+	priv = dev->ml_priv;
 	grp = priv->mpcg;
 
 	CTCM_DBF_TEXT_(MPC_SETUP, CTC_DBF_DEBUG,
@@ -571,7 +570,7 @@ void ctc_mpc_flow_control(int port_num, int flowc)
 	dev = ctcmpc_get_dev(port_num);
 	if (dev == NULL)
 		return;
-	priv = dev->priv;
+	priv = dev->ml_priv;
 	grp = priv->mpcg;
 
 	CTCM_DBF_TEXT_(MPC_TRACE, CTC_DBF_DEBUG,
@@ -620,7 +619,7 @@ static void mpc_rcvd_sweep_resp(struct mpcg_info *mpcginfo)
 {
 	struct channel	  *rch = mpcginfo->ch;
 	struct net_device *dev = rch->netdev;
-	struct ctcm_priv   *priv = dev->priv;
+	struct ctcm_priv   *priv = dev->ml_priv;
 	struct mpc_group  *grp = priv->mpcg;
 	struct channel	  *ch = priv->channel[WRITE];
 
@@ -651,7 +650,7 @@ static void mpc_rcvd_sweep_resp(struct mpcg_info *mpcginfo)
 static void ctcmpc_send_sweep_resp(struct channel *rch)
 {
 	struct net_device *dev = rch->netdev;
-	struct ctcm_priv *priv = dev->priv;
+	struct ctcm_priv *priv = dev->ml_priv;
 	struct mpc_group *grp = priv->mpcg;
 	int rc = 0;
 	struct th_sweep *header;
@@ -713,7 +712,7 @@ static void mpc_rcvd_sweep_req(struct mpcg_info *mpcginfo)
 {
 	struct channel	  *rch     = mpcginfo->ch;
 	struct net_device *dev     = rch->netdev;
-	struct ctcm_priv  *priv = dev->priv;
+	struct ctcm_priv  *priv = dev->ml_priv;
 	struct mpc_group  *grp  = priv->mpcg;
 	struct channel	  *ch	   = priv->channel[WRITE];
 
@@ -847,7 +846,7 @@ static int mpcg_fsm_len = ARRAY_SIZE(mpcg_fsm);
 static void mpc_action_go_ready(fsm_instance *fsm, int event, void *arg)
 {
 	struct net_device *dev = arg;
-	struct ctcm_priv *priv = dev->priv;
+	struct ctcm_priv *priv = dev->ml_priv;
 	struct mpc_group *grp = priv->mpcg;
 
 	if (grp == NULL) {
@@ -891,7 +890,7 @@ static void mpc_action_go_ready(fsm_instance *fsm, int event, void *arg)
 void mpc_group_ready(unsigned long adev)
 {
 	struct net_device *dev = (struct net_device *)adev;
-	struct ctcm_priv *priv = dev->priv;
+	struct ctcm_priv *priv = dev->ml_priv;
 	struct mpc_group *grp = priv->mpcg;
 	struct channel *ch = NULL;
 
@@ -947,7 +946,7 @@ void mpc_group_ready(unsigned long adev)
 void mpc_channel_action(struct channel *ch, int direction, int action)
 {
 	struct net_device  *dev  = ch->netdev;
-	struct ctcm_priv   *priv = dev->priv;
+	struct ctcm_priv   *priv = dev->ml_priv;
 	struct mpc_group   *grp  = priv->mpcg;
 
 	if (grp == NULL) {
@@ -1057,7 +1056,7 @@ done:
 static void ctcmpc_unpack_skb(struct channel *ch, struct sk_buff *pskb)
 {
 	struct net_device *dev	= ch->netdev;
-	struct ctcm_priv *priv = dev->priv;
+	struct ctcm_priv *priv = dev->ml_priv;
 	struct mpc_group *grp = priv->mpcg;
 	struct pdu *curr_pdu;
 	struct mpcg_info *mpcginfo;
@@ -1255,7 +1254,7 @@ void ctcmpc_bh(unsigned long thischan)
 	struct channel	  *ch	= (struct channel *)thischan;
 	struct sk_buff	  *skb;
 	struct net_device *dev	= ch->netdev;
-	struct ctcm_priv  *priv	= dev->priv;
+	struct ctcm_priv  *priv	= dev->ml_priv;
 	struct mpc_group  *grp	= priv->mpcg;
 
 	CTCM_PR_DEBUG("%s cp:%i enter:  %s() %s\n",
@@ -1377,7 +1376,7 @@ static void mpc_action_go_inop(fsm_instance *fi, int event, void *arg)
 	BUG_ON(dev == NULL);
 	CTCM_PR_DEBUG("Enter %s: %s\n",	__func__, dev->name);
 
-	priv  = dev->priv;
+	priv  = dev->ml_priv;
 	grp =  priv->mpcg;
 	grp->flow_off_called = 0;
 	fsm_deltimer(&grp->timer);
@@ -1483,7 +1482,7 @@ static void mpc_action_timeout(fsm_instance *fi, int event, void *arg)
 
 	BUG_ON(dev == NULL);
 
-	priv = dev->priv;
+	priv = dev->ml_priv;
 	grp = priv->mpcg;
 	wch = priv->channel[WRITE];
 	rch = priv->channel[READ];
@@ -1521,7 +1520,7 @@ void mpc_action_discontact(fsm_instance *fi, int event, void *arg)
 	if (ch) {
 		dev = ch->netdev;
 		if (dev) {
-			priv = dev->priv;
+			priv = dev->ml_priv;
 			if (priv) {
 				CTCM_DBF_TEXT_(MPC_TRACE, CTC_DBF_NOTICE,
 					"%s: %s: %s\n",
@@ -1569,7 +1568,7 @@ static int mpc_validate_xid(struct mpcg_info *mpcginfo)
 {
 	struct channel	   *ch	 = mpcginfo->ch;
 	struct net_device  *dev  = ch->netdev;
-	struct ctcm_priv   *priv = dev->priv;
+	struct ctcm_priv   *priv = dev->ml_priv;
 	struct mpc_group   *grp  = priv->mpcg;
 	struct xid2	   *xid  = mpcginfo->xid;
 	int	rc	 = 0;
@@ -1866,7 +1865,7 @@ static void mpc_action_doxid0(fsm_instance *fsm, int event, void *arg)
 {
 	struct channel	   *ch   = arg;
 	struct net_device  *dev  = ch->netdev;
-	struct ctcm_priv   *priv = dev->priv;
+	struct ctcm_priv   *priv = dev->ml_priv;
 	struct mpc_group   *grp  = priv->mpcg;
 
 	CTCM_PR_DEBUG("Enter %s: cp=%i ch=0x%p id=%s\n",
@@ -1906,7 +1905,7 @@ static void mpc_action_doxid0(fsm_instance *fsm, int event, void *arg)
 static void mpc_action_doxid7(fsm_instance *fsm, int event, void *arg)
 {
 	struct net_device *dev = arg;
-	struct ctcm_priv  *priv = dev->priv;
+	struct ctcm_priv  *priv = dev->ml_priv;
 	struct mpc_group  *grp  = NULL;
 	int direction;
 	int send = 0;
@@ -1983,7 +1982,7 @@ static void mpc_action_rcvd_xid0(fsm_instance *fsm, int event, void *arg)
 	struct mpcg_info   *mpcginfo  = arg;
 	struct channel	   *ch   = mpcginfo->ch;
 	struct net_device  *dev  = ch->netdev;
-	struct ctcm_priv   *priv = dev->priv;
+	struct ctcm_priv   *priv = dev->ml_priv;
 	struct mpc_group   *grp  = priv->mpcg;
 
 	CTCM_PR_DEBUG("%s: ch-id:%s xid2:%i xid7:%i xidt_p2:%i \n",
@@ -2045,7 +2044,7 @@ static void mpc_action_rcvd_xid7(fsm_instance *fsm, int event, void *arg)
 	struct mpcg_info   *mpcginfo   = arg;
 	struct channel	   *ch	       = mpcginfo->ch;
 	struct net_device  *dev        = ch->netdev;
-	struct ctcm_priv   *priv    = dev->priv;
+	struct ctcm_priv   *priv    = dev->ml_priv;
 	struct mpc_group   *grp     = priv->mpcg;
 
 	CTCM_PR_DEBUG("Enter %s: cp=%i ch=0x%p id=%s\n",
@@ -2097,7 +2096,7 @@ static int mpc_send_qllc_discontact(struct net_device *dev)
 	__u32	new_len	= 0;
 	struct sk_buff   *skb;
 	struct qllc      *qllcptr;
-	struct ctcm_priv *priv = dev->priv;
+	struct ctcm_priv *priv = dev->ml_priv;
 	struct mpc_group *grp = priv->mpcg;
 
 	CTCM_PR_DEBUG("%s: GROUP STATE: %s\n",
diff --git a/drivers/s390/net/lcs.c b/drivers/s390/net/lcs.c
index 6de28385b354..9bcfa04d863b 100644
--- a/drivers/s390/net/lcs.c
+++ b/drivers/s390/net/lcs.c
@@ -1412,7 +1412,8 @@ lcs_irq(struct ccw_device *cdev, unsigned long intparm, struct irb *irb)
 	}
 	/* How far in the ccw chain have we processed? */
 	if ((channel->state != LCS_CH_STATE_INIT) &&
-	    (irb->scsw.cmd.fctl & SCSW_FCTL_START_FUNC)) {
+	    (irb->scsw.cmd.fctl & SCSW_FCTL_START_FUNC) &&
+	    (irb->scsw.cmd.cpa != 0)) {
 		index = (struct ccw1 *) __va((addr_t) irb->scsw.cmd.cpa)
 			- channel->ccws;
 		if ((irb->scsw.cmd.actl & SCSW_ACTL_SUSPENDED) ||
diff --git a/drivers/s390/net/qeth_core.h b/drivers/s390/net/qeth_core.h
index 1895dbb553cd..bf8a75c92f28 100644
--- a/drivers/s390/net/qeth_core.h
+++ b/drivers/s390/net/qeth_core.h
@@ -419,6 +419,7 @@ struct qeth_qdio_out_buffer {
 	int next_element_to_fill;
 	struct sk_buff_head skb_list;
 	struct list_head ctx_list;
+	int is_header[16];
 };
 
 struct qeth_card;
@@ -688,6 +689,7 @@ struct qeth_mc_mac {
 	struct list_head list;
 	__u8 mc_addr[MAX_ADDR_LEN];
 	unsigned char mc_addrlen;
+	int is_vmac;
 };
 
 struct qeth_card {
@@ -785,7 +787,7 @@ void qeth_core_remove_osn_attributes(struct device *);
 
 /* exports for qeth discipline device drivers */
 extern struct qeth_card_list_struct qeth_core_card_list;
-
+extern struct kmem_cache *qeth_core_header_cache;
 extern struct qeth_dbf_info qeth_dbf[QETH_DBF_INFOS];
 
 void qeth_set_allowed_threads(struct qeth_card *, unsigned long , int);
@@ -843,7 +845,7 @@ int qeth_get_priority_queue(struct qeth_card *, struct sk_buff *, int, int);
 int qeth_get_elements_no(struct qeth_card *, void *, struct sk_buff *, int);
 int qeth_do_send_packet_fast(struct qeth_card *, struct qeth_qdio_out_q *,
 			struct sk_buff *, struct qeth_hdr *, int,
-			struct qeth_eddp_context *);
+			struct qeth_eddp_context *, int, int);
 int qeth_do_send_packet(struct qeth_card *, struct qeth_qdio_out_q *,
 		    struct sk_buff *, struct qeth_hdr *,
 		    int, struct qeth_eddp_context *);
diff --git a/drivers/s390/net/qeth_core_main.c b/drivers/s390/net/qeth_core_main.c
index c3ad89e302bd..c7ab1b864516 100644
--- a/drivers/s390/net/qeth_core_main.c
+++ b/drivers/s390/net/qeth_core_main.c
@@ -19,8 +19,8 @@
 #include <linux/mii.h>
 #include <linux/kthread.h>
 
-#include <asm-s390/ebcdic.h>
-#include <asm-s390/io.h>
+#include <asm/ebcdic.h>
+#include <asm/io.h>
 #include <asm/s390_rdev.h>
 
 #include "qeth_core.h"
@@ -48,6 +48,8 @@ EXPORT_SYMBOL_GPL(qeth_dbf);
 
 struct qeth_card_list_struct qeth_core_card_list;
 EXPORT_SYMBOL_GPL(qeth_core_card_list);
+struct kmem_cache *qeth_core_header_cache;
+EXPORT_SYMBOL_GPL(qeth_core_header_cache);
 
 static struct device *qeth_core_root_dev;
 static unsigned int known_devices[][10] = QETH_MODELLIST_ARRAY;
@@ -933,6 +935,10 @@ static void qeth_clear_output_buffer(struct qeth_qdio_out_q *queue,
 	}
 	qeth_eddp_buf_release_contexts(buf);
 	for (i = 0; i < QETH_MAX_BUFFER_ELEMENTS(queue->card); ++i) {
+		if (buf->buffer->element[i].addr && buf->is_header[i])
+			kmem_cache_free(qeth_core_header_cache,
+				buf->buffer->element[i].addr);
+		buf->is_header[i] = 0;
 		buf->buffer->element[i].length = 0;
 		buf->buffer->element[i].addr = NULL;
 		buf->buffer->element[i].flags = 0;
@@ -3002,8 +3008,8 @@ int qeth_get_elements_no(struct qeth_card *card, void *hdr,
 	if (skb_shinfo(skb)->nr_frags > 0)
 		elements_needed = (skb_shinfo(skb)->nr_frags + 1);
 	if (elements_needed == 0)
-		elements_needed = 1 + (((((unsigned long) hdr) % PAGE_SIZE)
-			+ skb->len) >> PAGE_SHIFT);
+		elements_needed = 1 + (((((unsigned long) skb->data) %
+				PAGE_SIZE) + skb->len) >> PAGE_SHIFT);
 	if ((elements_needed + elems) > QETH_MAX_BUFFER_ELEMENTS(card)) {
 		QETH_DBF_MESSAGE(2, "Invalid size of IP packet "
 			"(Number=%d / Length=%d). Discarded.\n",
@@ -3015,9 +3021,10 @@ int qeth_get_elements_no(struct qeth_card *card, void *hdr,
 EXPORT_SYMBOL_GPL(qeth_get_elements_no);
 
 static inline void __qeth_fill_buffer(struct sk_buff *skb,
-	struct qdio_buffer *buffer, int is_tso, int *next_element_to_fill)
+	struct qdio_buffer *buffer, int is_tso, int *next_element_to_fill,
+	int offset)
 {
-	int length = skb->len;
+	int length = skb->len - offset;
 	int length_here;
 	int element;
 	char *data;
@@ -3027,6 +3034,11 @@ static inline void __qeth_fill_buffer(struct sk_buff *skb,
 	data = skb->data;
 	first_lap = (is_tso == 0 ? 1 : 0);
 
+	if (offset >= 0) {
+		data = skb->data + offset;
+		first_lap = 0;
+	}
+
 	while (length > 0) {
 		/* length_here is the remaining amount of data in this page */
 		length_here = PAGE_SIZE - ((unsigned long) data % PAGE_SIZE);
@@ -3058,22 +3070,22 @@ static inline void __qeth_fill_buffer(struct sk_buff *skb,
 }
 
 static inline int qeth_fill_buffer(struct qeth_qdio_out_q *queue,
-		struct qeth_qdio_out_buffer *buf, struct sk_buff *skb)
+		struct qeth_qdio_out_buffer *buf, struct sk_buff *skb,
+		struct qeth_hdr *hdr, int offset, int hd_len)
 {
 	struct qdio_buffer *buffer;
-	struct qeth_hdr_tso *hdr;
 	int flush_cnt = 0, hdr_len, large_send = 0;
 
 	buffer = buf->buffer;
 	atomic_inc(&skb->users);
 	skb_queue_tail(&buf->skb_list, skb);
 
-	hdr  = (struct qeth_hdr_tso *) skb->data;
 	/*check first on TSO ....*/
-	if (hdr->hdr.hdr.l3.id == QETH_HEADER_TYPE_TSO) {
+	if (hdr->hdr.l3.id == QETH_HEADER_TYPE_TSO) {
 		int element = buf->next_element_to_fill;
 
-		hdr_len = sizeof(struct qeth_hdr_tso) + hdr->ext.dg_hdr_len;
+		hdr_len = sizeof(struct qeth_hdr_tso) +
+			((struct qeth_hdr_tso *)hdr)->ext.dg_hdr_len;
 		/*fill first buffer entry only with header information */
 		buffer->element[element].addr = skb->data;
 		buffer->element[element].length = hdr_len;
@@ -3083,9 +3095,20 @@ static inline int qeth_fill_buffer(struct qeth_qdio_out_q *queue,
 		skb->len  -= hdr_len;
 		large_send = 1;
 	}
+
+	if (offset >= 0) {
+		int element = buf->next_element_to_fill;
+		buffer->element[element].addr = hdr;
+		buffer->element[element].length = sizeof(struct qeth_hdr) +
+							hd_len;
+		buffer->element[element].flags = SBAL_FLAGS_FIRST_FRAG;
+		buf->is_header[element] = 1;
+		buf->next_element_to_fill++;
+	}
+
 	if (skb_shinfo(skb)->nr_frags == 0)
 		__qeth_fill_buffer(skb, buffer, large_send,
-				   (int *)&buf->next_element_to_fill);
+				(int *)&buf->next_element_to_fill, offset);
 	else
 		__qeth_fill_buffer_frag(skb, buffer, large_send,
 					(int *)&buf->next_element_to_fill);
@@ -3115,7 +3138,7 @@ static inline int qeth_fill_buffer(struct qeth_qdio_out_q *queue,
 int qeth_do_send_packet_fast(struct qeth_card *card,
 		struct qeth_qdio_out_q *queue, struct sk_buff *skb,
 		struct qeth_hdr *hdr, int elements_needed,
-		struct qeth_eddp_context *ctx)
+		struct qeth_eddp_context *ctx, int offset, int hd_len)
 {
 	struct qeth_qdio_out_buffer *buffer;
 	int buffers_needed = 0;
@@ -3148,7 +3171,7 @@ int qeth_do_send_packet_fast(struct qeth_card *card,
 	}
 	atomic_set(&queue->state, QETH_OUT_Q_UNLOCKED);
 	if (ctx == NULL) {
-		qeth_fill_buffer(queue, buffer, skb);
+		qeth_fill_buffer(queue, buffer, skb, hdr, offset, hd_len);
 		qeth_flush_buffers(queue, index, 1);
 	} else {
 		flush_cnt = qeth_eddp_fill_buffer(queue, ctx, index);
@@ -3224,7 +3247,7 @@ int qeth_do_send_packet(struct qeth_card *card, struct qeth_qdio_out_q *queue,
 		}
 	}
 	if (ctx == NULL)
-		tmp = qeth_fill_buffer(queue, buffer, skb);
+		tmp = qeth_fill_buffer(queue, buffer, skb, hdr, -1, 0);
 	else {
 		tmp = qeth_eddp_fill_buffer(queue, ctx,
 						queue->next_buf_to_fill);
@@ -3321,7 +3344,7 @@ int qeth_change_mtu(struct net_device *dev, int new_mtu)
 	struct qeth_card *card;
 	char dbf_text[15];
 
-	card = netdev_priv(dev);
+	card = dev->ml_priv;
 
 	QETH_DBF_TEXT(TRACE, 4, "chgmtu");
 	sprintf(dbf_text, "%8x", new_mtu);
@@ -3343,7 +3366,7 @@ struct net_device_stats *qeth_get_stats(struct net_device *dev)
 {
 	struct qeth_card *card;
 
-	card = netdev_priv(dev);
+	card = dev->ml_priv;
 
 	QETH_DBF_TEXT(TRACE, 5, "getstat");
 
@@ -3395,7 +3418,7 @@ void qeth_tx_timeout(struct net_device *dev)
 {
 	struct qeth_card *card;
 
-	card = netdev_priv(dev);
+	card = dev->ml_priv;
 	card->stats.tx_errors++;
 	qeth_schedule_recovery(card);
 }
@@ -3403,7 +3426,7 @@ EXPORT_SYMBOL_GPL(qeth_tx_timeout);
 
 int qeth_mdio_read(struct net_device *dev, int phy_id, int regnum)
 {
-	struct qeth_card *card = netdev_priv(dev);
+	struct qeth_card *card = dev->ml_priv;
 	int rc = 0;
 
 	switch (regnum) {
@@ -4253,7 +4276,7 @@ EXPORT_SYMBOL_GPL(qeth_core_get_stats_count);
 void qeth_core_get_ethtool_stats(struct net_device *dev,
 		struct ethtool_stats *stats, u64 *data)
 {
-	struct qeth_card *card = netdev_priv(dev);
+	struct qeth_card *card = dev->ml_priv;
 	data[0] = card->stats.rx_packets -
 				card->perf_stats.initial_rx_packets;
 	data[1] = card->perf_stats.bufs_rec;
@@ -4313,7 +4336,7 @@ EXPORT_SYMBOL_GPL(qeth_core_get_strings);
 void qeth_core_get_drvinfo(struct net_device *dev,
 		struct ethtool_drvinfo *info)
 {
-	struct qeth_card *card = netdev_priv(dev);
+	struct qeth_card *card = dev->ml_priv;
 	if (card->options.layer2)
 		strcpy(info->driver, "qeth_l2");
 	else
@@ -4331,7 +4354,7 @@ EXPORT_SYMBOL_GPL(qeth_core_get_drvinfo);
 int qeth_core_ethtool_get_settings(struct net_device *netdev,
 					struct ethtool_cmd *ecmd)
 {
-	struct qeth_card *card = netdev_priv(netdev);
+	struct qeth_card *card = netdev->ml_priv;
 	enum qeth_link_types link_type;
 
 	if ((card->info.type == QETH_CARD_TYPE_IQD) || (card->info.guestlan))
@@ -4443,8 +4466,17 @@ static int __init qeth_core_init(void)
 	rc = IS_ERR(qeth_core_root_dev) ? PTR_ERR(qeth_core_root_dev) : 0;
 	if (rc)
 		goto register_err;
-	return 0;
 
+	qeth_core_header_cache = kmem_cache_create("qeth_hdr",
+			sizeof(struct qeth_hdr) + ETH_HLEN, 64, 0, NULL);
+	if (!qeth_core_header_cache) {
+		rc = -ENOMEM;
+		goto slab_err;
+	}
+
+	return 0;
+slab_err:
+	s390_root_dev_unregister(qeth_core_root_dev);
 register_err:
 	driver_remove_file(&qeth_core_ccwgroup_driver.driver,
 			   &driver_attr_group);
@@ -4466,6 +4498,7 @@ static void __exit qeth_core_exit(void)
 			   &driver_attr_group);
 	ccwgroup_driver_unregister(&qeth_core_ccwgroup_driver);
 	ccw_driver_unregister(&qeth_ccw_driver);
+	kmem_cache_destroy(qeth_core_header_cache);
 	qeth_unregister_dbf_views();
 	PRINT_INFO("core functions removed\n");
 }
diff --git a/drivers/s390/net/qeth_l2_main.c b/drivers/s390/net/qeth_l2_main.c
index 3fbc3bdec0c5..3ac3cc1e03cc 100644
--- a/drivers/s390/net/qeth_l2_main.c
+++ b/drivers/s390/net/qeth_l2_main.c
@@ -35,7 +35,7 @@ static int qeth_l2_recover(void *);
 
 static int qeth_l2_do_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
 {
-	struct qeth_card *card = netdev_priv(dev);
+	struct qeth_card *card = dev->ml_priv;
 	struct mii_ioctl_data *mii_data;
 	int rc = 0;
 
@@ -177,9 +177,10 @@ static int qeth_l2_send_delgroupmac(struct qeth_card *card, __u8 *mac)
 					  qeth_l2_send_delgroupmac_cb);
 }
 
-static void qeth_l2_add_mc(struct qeth_card *card, __u8 *mac)
+static void qeth_l2_add_mc(struct qeth_card *card, __u8 *mac, int vmac)
 {
 	struct qeth_mc_mac *mc;
+	int rc;
 
 	mc = kmalloc(sizeof(struct qeth_mc_mac), GFP_ATOMIC);
 
@@ -188,8 +189,16 @@ static void qeth_l2_add_mc(struct qeth_card *card, __u8 *mac)
 
 	memcpy(mc->mc_addr, mac, OSA_ADDR_LEN);
 	mc->mc_addrlen = OSA_ADDR_LEN;
+	mc->is_vmac = vmac;
+
+	if (vmac) {
+		rc = qeth_l2_send_setdelmac(card, mac, IPA_CMD_SETVMAC,
+					NULL);
+	} else {
+		rc = qeth_l2_send_setgroupmac(card, mac);
+	}
 
-	if (!qeth_l2_send_setgroupmac(card, mac))
+	if (!rc)
 		list_add_tail(&mc->list, &card->mc_list);
 	else
 		kfree(mc);
@@ -201,7 +210,11 @@ static void qeth_l2_del_all_mc(struct qeth_card *card)
 
 	spin_lock_bh(&card->mclock);
 	list_for_each_entry_safe(mc, tmp, &card->mc_list, list) {
-		qeth_l2_send_delgroupmac(card, mc->mc_addr);
+		if (mc->is_vmac)
+			qeth_l2_send_setdelmac(card, mc->mc_addr,
+					IPA_CMD_DELVMAC, NULL);
+		else
+			qeth_l2_send_delgroupmac(card, mc->mc_addr);
 		list_del(&mc->list);
 		kfree(mc);
 	}
@@ -243,8 +256,7 @@ static void qeth_l2_get_packet_type(struct qeth_card *card,
 static void qeth_l2_fill_header(struct qeth_card *card, struct qeth_hdr *hdr,
 			struct sk_buff *skb, int ipv, int cast_type)
 {
-	struct vlan_ethhdr *veth = (struct vlan_ethhdr *)((skb->data) +
-					QETH_HEADER_SIZE);
+	struct vlan_ethhdr *veth = (struct vlan_ethhdr *)skb_mac_header(skb);
 
 	memset(hdr, 0, sizeof(struct qeth_hdr));
 	hdr->hdr.l2.id = QETH_HEADER_TYPE_LAYER2;
@@ -317,7 +329,7 @@ static void qeth_l2_process_vlans(struct qeth_card *card, int clear)
 
 static void qeth_l2_vlan_rx_add_vid(struct net_device *dev, unsigned short vid)
 {
-	struct qeth_card *card = netdev_priv(dev);
+	struct qeth_card *card = dev->ml_priv;
 	struct qeth_vlan_vid *id;
 
 	QETH_DBF_TEXT_(TRACE, 4, "aid:%d", vid);
@@ -334,7 +346,7 @@ static void qeth_l2_vlan_rx_add_vid(struct net_device *dev, unsigned short vid)
 static void qeth_l2_vlan_rx_kill_vid(struct net_device *dev, unsigned short vid)
 {
 	struct qeth_vlan_vid *id, *tmpid = NULL;
-	struct qeth_card *card = netdev_priv(dev);
+	struct qeth_card *card = dev->ml_priv;
 
 	QETH_DBF_TEXT_(TRACE, 4, "kid:%d", vid);
 	spin_lock_bh(&card->vlanlock);
@@ -566,7 +578,7 @@ static int qeth_l2_request_initial_mac(struct qeth_card *card)
 static int qeth_l2_set_mac_address(struct net_device *dev, void *p)
 {
 	struct sockaddr *addr = p;
-	struct qeth_card *card = netdev_priv(dev);
+	struct qeth_card *card = dev->ml_priv;
 	int rc = 0;
 
 	QETH_DBF_TEXT(TRACE, 3, "setmac");
@@ -590,8 +602,8 @@ static int qeth_l2_set_mac_address(struct net_device *dev, void *p)
 
 static void qeth_l2_set_multicast_list(struct net_device *dev)
 {
-	struct qeth_card *card = netdev_priv(dev);
-	struct dev_mc_list *dm;
+	struct qeth_card *card = dev->ml_priv;
+	struct dev_addr_list *dm;
 
 	if (card->info.type == QETH_CARD_TYPE_OSN)
 		return ;
@@ -600,7 +612,11 @@ static void qeth_l2_set_multicast_list(struct net_device *dev)
 	qeth_l2_del_all_mc(card);
 	spin_lock_bh(&card->mclock);
 	for (dm = dev->mc_list; dm; dm = dm->next)
-		qeth_l2_add_mc(card, dm->dmi_addr);
+		qeth_l2_add_mc(card, dm->da_addr, 0);
+
+	for (dm = dev->uc_list; dm; dm = dm->next)
+		qeth_l2_add_mc(card, dm->da_addr, 1);
+
 	spin_unlock_bh(&card->mclock);
 	if (!qeth_adp_supported(card, IPA_SETADP_SET_PROMISC_MODE))
 		return;
@@ -612,7 +628,7 @@ static int qeth_l2_hard_start_xmit(struct sk_buff *skb, struct net_device *dev)
 	int rc;
 	struct qeth_hdr *hdr = NULL;
 	int elements = 0;
-	struct qeth_card *card = netdev_priv(dev);
+	struct qeth_card *card = dev->ml_priv;
 	struct sk_buff *new_skb = skb;
 	int ipv = qeth_get_ip_version(skb);
 	int cast_type = qeth_get_cast_type(card, skb);
@@ -621,6 +637,9 @@ static int qeth_l2_hard_start_xmit(struct sk_buff *skb, struct net_device *dev)
 	int tx_bytes = skb->len;
 	enum qeth_large_send_types large_send = QETH_LARGE_SEND_NO;
 	struct qeth_eddp_context *ctx = NULL;
+	int data_offset = -1;
+	int elements_needed = 0;
+	int hd_len = 0;
 
 	if ((card->state != CARD_STATE_UP) || !card->lan_online) {
 		card->stats.tx_carrier_errors++;
@@ -643,13 +662,32 @@ static int qeth_l2_hard_start_xmit(struct sk_buff *skb, struct net_device *dev)
 	if (card->info.type == QETH_CARD_TYPE_OSN)
 		hdr = (struct qeth_hdr *)skb->data;
 	else {
-		/* create a clone with writeable headroom */
-		new_skb = skb_realloc_headroom(skb, sizeof(struct qeth_hdr));
-		if (!new_skb)
-			goto tx_drop;
-		hdr = (struct qeth_hdr *)skb_push(new_skb,
+		if ((card->info.type == QETH_CARD_TYPE_IQD) && (!large_send) &&
+		    (skb_shinfo(skb)->nr_frags == 0)) {
+			new_skb = skb;
+			data_offset = ETH_HLEN;
+			hd_len = ETH_HLEN;
+			hdr = kmem_cache_alloc(qeth_core_header_cache,
+						GFP_ATOMIC);
+			if (!hdr)
+				goto tx_drop;
+			elements_needed++;
+			skb_reset_mac_header(new_skb);
+			qeth_l2_fill_header(card, hdr, new_skb, ipv, cast_type);
+			hdr->hdr.l2.pkt_length = new_skb->len;
+			memcpy(((char *)hdr) + sizeof(struct qeth_hdr),
+				skb_mac_header(new_skb), ETH_HLEN);
+		} else {
+			/* create a clone with writeable headroom */
+			new_skb = skb_realloc_headroom(skb,
+						sizeof(struct qeth_hdr));
+			if (!new_skb)
+				goto tx_drop;
+			hdr = (struct qeth_hdr *)skb_push(new_skb,
 						sizeof(struct qeth_hdr));
-		qeth_l2_fill_header(card, hdr, new_skb, ipv, cast_type);
+			skb_set_mac_header(new_skb, sizeof(struct qeth_hdr));
+			qeth_l2_fill_header(card, hdr, new_skb, ipv, cast_type);
+		}
 	}
 
 	if (large_send == QETH_LARGE_SEND_EDDP) {
@@ -660,9 +698,13 @@ static int qeth_l2_hard_start_xmit(struct sk_buff *skb, struct net_device *dev)
 			goto tx_drop;
 		}
 	} else {
-		elements = qeth_get_elements_no(card, (void *)hdr, new_skb, 0);
-		if (!elements)
+		elements = qeth_get_elements_no(card, (void *)hdr, new_skb,
+						elements_needed);
+		if (!elements) {
+			if (data_offset >= 0)
+				kmem_cache_free(qeth_core_header_cache, hdr);
 			goto tx_drop;
+		}
 	}
 
 	if ((large_send == QETH_LARGE_SEND_NO) &&
@@ -674,7 +716,7 @@ static int qeth_l2_hard_start_xmit(struct sk_buff *skb, struct net_device *dev)
 					 elements, ctx);
 	else
 		rc = qeth_do_send_packet_fast(card, queue, new_skb, hdr,
-					      elements, ctx);
+					elements, ctx, data_offset, hd_len);
 	if (!rc) {
 		card->stats.tx_packets++;
 		card->stats.tx_bytes += tx_bytes;
@@ -701,6 +743,9 @@ static int qeth_l2_hard_start_xmit(struct sk_buff *skb, struct net_device *dev)
 		if (ctx != NULL)
 			qeth_eddp_put_context(ctx);
 
+		if (data_offset >= 0)
+			kmem_cache_free(qeth_core_header_cache, hdr);
+
 		if (rc == -EBUSY) {
 			if (new_skb != skb)
 				dev_kfree_skb_any(new_skb);
@@ -767,7 +812,7 @@ static void qeth_l2_qdio_input_handler(struct ccw_device *ccwdev,
 
 static int qeth_l2_open(struct net_device *dev)
 {
-	struct qeth_card *card = netdev_priv(dev);
+	struct qeth_card *card = dev->ml_priv;
 
 	QETH_DBF_TEXT(TRACE, 4, "qethopen");
 	if (card->state != CARD_STATE_SOFTSETUP)
@@ -791,7 +836,7 @@ static int qeth_l2_open(struct net_device *dev)
 
 static int qeth_l2_stop(struct net_device *dev)
 {
-	struct qeth_card *card = netdev_priv(dev);
+	struct qeth_card *card = dev->ml_priv;
 
 	QETH_DBF_TEXT(TRACE, 4, "qethstop");
 	netif_tx_disable(dev);
@@ -838,7 +883,7 @@ static void qeth_l2_remove_device(struct ccwgroup_device *cgdev)
 
 static int qeth_l2_ethtool_set_tso(struct net_device *dev, u32 data)
 {
-	struct qeth_card *card = netdev_priv(dev);
+	struct qeth_card *card = dev->ml_priv;
 
 	if (data) {
 		if (card->options.large_send == QETH_LARGE_SEND_NO) {
@@ -894,7 +939,7 @@ static int qeth_l2_setup_netdev(struct qeth_card *card)
 	if (!card->dev)
 		return -ENODEV;
 
-	card->dev->priv = card;
+	card->dev->ml_priv = card;
 	card->dev->tx_timeout = &qeth_tx_timeout;
 	card->dev->watchdog_timeo = QETH_TX_TIMEOUT;
 	card->dev->open = qeth_l2_open;
@@ -1178,7 +1223,7 @@ int qeth_osn_assist(struct net_device *dev, void *data, int data_len)
 	QETH_DBF_TEXT(TRACE, 2, "osnsdmc");
 	if (!dev)
 		return -ENODEV;
-	card = netdev_priv(dev);
+	card = dev->ml_priv;
 	if (!card)
 		return -ENODEV;
 	if ((card->state != CARD_STATE_UP) &&
@@ -1201,7 +1246,7 @@ int qeth_osn_register(unsigned char *read_dev_no, struct net_device **dev,
 	*dev = qeth_l2_netdev_by_devno(read_dev_no);
 	if (*dev == NULL)
 		return -ENODEV;
-	card = netdev_priv(*dev);
+	card = (*dev)->ml_priv;
 	if (!card)
 		return -ENODEV;
 	if ((assist_cb == NULL) || (data_cb == NULL))
@@ -1219,7 +1264,7 @@ void qeth_osn_deregister(struct net_device *dev)
 	QETH_DBF_TEXT(TRACE, 2, "osndereg");
 	if (!dev)
 		return;
-	card = netdev_priv(dev);
+	card = dev->ml_priv;
 	if (!card)
 		return;
 	card->osn_info.assist_cb = NULL;
diff --git a/drivers/s390/net/qeth_l3_main.c b/drivers/s390/net/qeth_l3_main.c
index 38de31b55708..dd72c3c20165 100644
--- a/drivers/s390/net/qeth_l3_main.c
+++ b/drivers/s390/net/qeth_l3_main.c
@@ -1813,7 +1813,7 @@ static void qeth_l3_free_vlan_addresses(struct qeth_card *card,
 static void qeth_l3_vlan_rx_register(struct net_device *dev,
 			struct vlan_group *grp)
 {
-	struct qeth_card *card = netdev_priv(dev);
+	struct qeth_card *card = dev->ml_priv;
 	unsigned long flags;
 
 	QETH_DBF_TEXT(TRACE, 4, "vlanreg");
@@ -1825,7 +1825,7 @@ static void qeth_l3_vlan_rx_register(struct net_device *dev,
 static void qeth_l3_vlan_rx_add_vid(struct net_device *dev, unsigned short vid)
 {
 	struct net_device *vlandev;
-	struct qeth_card *card = (struct qeth_card *) dev->priv;
+	struct qeth_card *card = dev->ml_priv;
 	struct in_device *in_dev;
 
 	if (card->info.type == QETH_CARD_TYPE_IQD)
@@ -1851,7 +1851,7 @@ static void qeth_l3_vlan_rx_add_vid(struct net_device *dev, unsigned short vid)
 
 static void qeth_l3_vlan_rx_kill_vid(struct net_device *dev, unsigned short vid)
 {
-	struct qeth_card *card = netdev_priv(dev);
+	struct qeth_card *card = dev->ml_priv;
 	unsigned long flags;
 
 	QETH_DBF_TEXT_(TRACE, 4, "kid:%d", vid);
@@ -2013,7 +2013,7 @@ static int qeth_l3_verify_vlan_dev(struct net_device *dev,
 		}
 	}
 
-	if (rc && !(netdev_priv(vlan_dev_real_dev(dev)) == (void *)card))
+	if (rc && !(vlan_dev_real_dev(dev)->ml_priv == (void *)card))
 		return 0;
 
 	return rc;
@@ -2047,9 +2047,9 @@ static struct qeth_card *qeth_l3_get_card_from_dev(struct net_device *dev)
 
 	rc = qeth_l3_verify_dev(dev);
 	if (rc == QETH_REAL_CARD)
-		card = netdev_priv(dev);
+		card = dev->ml_priv;
 	else if (rc == QETH_VLAN_CARD)
-		card = netdev_priv(vlan_dev_real_dev(dev));
+		card = vlan_dev_real_dev(dev)->ml_priv;
 	if (card && card->options.layer2)
 		card = NULL;
 	QETH_DBF_TEXT_(TRACE, 4, "%d", rc);
@@ -2110,7 +2110,7 @@ static int qeth_l3_stop_card(struct qeth_card *card, int recovery_mode)
 
 static void qeth_l3_set_multicast_list(struct net_device *dev)
 {
-	struct qeth_card *card = netdev_priv(dev);
+	struct qeth_card *card = dev->ml_priv;
 
 	QETH_DBF_TEXT(TRACE, 3, "setmulti");
 	qeth_l3_delete_mc_addresses(card);
@@ -2438,7 +2438,7 @@ static int qeth_l3_arp_flush_cache(struct qeth_card *card)
 
 static int qeth_l3_do_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
 {
-	struct qeth_card *card = netdev_priv(dev);
+	struct qeth_card *card = dev->ml_priv;
 	struct qeth_arp_cache_entry arp_entry;
 	struct mii_ioctl_data *mii_data;
 	int rc = 0;
@@ -2595,7 +2595,7 @@ static int qeth_l3_hard_start_xmit(struct sk_buff *skb, struct net_device *dev)
 	u16 *tag;
 	struct qeth_hdr *hdr = NULL;
 	int elements_needed = 0;
-	struct qeth_card *card = netdev_priv(dev);
+	struct qeth_card *card = dev->ml_priv;
 	struct sk_buff *new_skb = NULL;
 	int ipv = qeth_get_ip_version(skb);
 	int cast_type = qeth_get_cast_type(card, skb);
@@ -2604,6 +2604,7 @@ static int qeth_l3_hard_start_xmit(struct sk_buff *skb, struct net_device *dev)
 	int tx_bytes = skb->len;
 	enum qeth_large_send_types large_send = QETH_LARGE_SEND_NO;
 	struct qeth_eddp_context *ctx = NULL;
+	int data_offset = -1;
 
 	if ((card->info.type == QETH_CARD_TYPE_IQD) &&
 	    (skb->protocol != htons(ETH_P_IPV6)) &&
@@ -2624,14 +2625,28 @@ static int qeth_l3_hard_start_xmit(struct sk_buff *skb, struct net_device *dev)
 		card->perf_stats.outbound_start_time = qeth_get_micros();
 	}
 
-	/* create a clone with writeable headroom */
-	new_skb = skb_realloc_headroom(skb, sizeof(struct qeth_hdr_tso) +
-					VLAN_HLEN);
-	if (!new_skb)
-		goto tx_drop;
+	if (skb_is_gso(skb))
+		large_send = card->options.large_send;
+
+	if ((card->info.type == QETH_CARD_TYPE_IQD) && (!large_send) &&
+	    (skb_shinfo(skb)->nr_frags == 0)) {
+		new_skb = skb;
+		data_offset = ETH_HLEN;
+		hdr = kmem_cache_alloc(qeth_core_header_cache, GFP_ATOMIC);
+		if (!hdr)
+			goto tx_drop;
+		elements_needed++;
+	} else {
+		/* create a clone with writeable headroom */
+		new_skb = skb_realloc_headroom(skb, sizeof(struct qeth_hdr_tso)
+					+ VLAN_HLEN);
+		if (!new_skb)
+			goto tx_drop;
+	}
 
 	if (card->info.type == QETH_CARD_TYPE_IQD) {
-		skb_pull(new_skb, ETH_HLEN);
+		if (data_offset < 0)
+			skb_pull(new_skb, ETH_HLEN);
 	} else {
 		if (new_skb->protocol == htons(ETH_P_IP)) {
 			if (card->dev->type == ARPHRD_IEEE802_TR)
@@ -2657,9 +2672,6 @@ static int qeth_l3_hard_start_xmit(struct sk_buff *skb, struct net_device *dev)
 
 	netif_stop_queue(dev);
 
-	if (skb_is_gso(new_skb))
-		large_send = card->options.large_send;
-
 	/* fix hardware limitation: as long as we do not have sbal
 	 * chaining we can not send long frag lists so we temporary
 	 * switch to EDDP
@@ -2677,9 +2689,16 @@ static int qeth_l3_hard_start_xmit(struct sk_buff *skb, struct net_device *dev)
 		qeth_tso_fill_header(card, hdr, new_skb);
 		elements_needed++;
 	} else {
-		hdr = (struct qeth_hdr *)skb_push(new_skb,
+		if (data_offset < 0) {
+			hdr = (struct qeth_hdr *)skb_push(new_skb,
 						sizeof(struct qeth_hdr));
-		qeth_l3_fill_header(card, hdr, new_skb, ipv, cast_type);
+			qeth_l3_fill_header(card, hdr, new_skb, ipv,
+						cast_type);
+		} else {
+			qeth_l3_fill_header(card, hdr, new_skb, ipv,
+						cast_type);
+			hdr->hdr.l3.length = new_skb->len - data_offset;
+		}
 	}
 
 	if (large_send == QETH_LARGE_SEND_EDDP) {
@@ -2695,8 +2714,11 @@ static int qeth_l3_hard_start_xmit(struct sk_buff *skb, struct net_device *dev)
 	} else {
 		int elems = qeth_get_elements_no(card, (void *)hdr, new_skb,
 						 elements_needed);
-		if (!elems)
+		if (!elems) {
+			if (data_offset >= 0)
+				kmem_cache_free(qeth_core_header_cache, hdr);
 			goto tx_drop;
+		}
 		elements_needed += elems;
 	}
 
@@ -2709,7 +2731,7 @@ static int qeth_l3_hard_start_xmit(struct sk_buff *skb, struct net_device *dev)
 					 elements_needed, ctx);
 	else
 		rc = qeth_do_send_packet_fast(card, queue, new_skb, hdr,
-					      elements_needed, ctx);
+					elements_needed, ctx, data_offset, 0);
 
 	if (!rc) {
 		card->stats.tx_packets++;
@@ -2737,6 +2759,9 @@ static int qeth_l3_hard_start_xmit(struct sk_buff *skb, struct net_device *dev)
 		if (ctx != NULL)
 			qeth_eddp_put_context(ctx);
 
+		if (data_offset >= 0)
+			kmem_cache_free(qeth_core_header_cache, hdr);
+
 		if (rc == -EBUSY) {
 			if (new_skb != skb)
 				dev_kfree_skb_any(new_skb);
@@ -2763,7 +2788,7 @@ tx_drop:
 
 static int qeth_l3_open(struct net_device *dev)
 {
-	struct qeth_card *card = netdev_priv(dev);
+	struct qeth_card *card = dev->ml_priv;
 
 	QETH_DBF_TEXT(TRACE, 4, "qethopen");
 	if (card->state != CARD_STATE_SOFTSETUP)
@@ -2780,7 +2805,7 @@ static int qeth_l3_open(struct net_device *dev)
 
 static int qeth_l3_stop(struct net_device *dev)
 {
-	struct qeth_card *card = netdev_priv(dev);
+	struct qeth_card *card = dev->ml_priv;
 
 	QETH_DBF_TEXT(TRACE, 4, "qethstop");
 	netif_tx_disable(dev);
@@ -2792,14 +2817,14 @@ static int qeth_l3_stop(struct net_device *dev)
 
 static u32 qeth_l3_ethtool_get_rx_csum(struct net_device *dev)
 {
-	struct qeth_card *card = netdev_priv(dev);
+	struct qeth_card *card = dev->ml_priv;
 
 	return (card->options.checksum_type == HW_CHECKSUMMING);
 }
 
 static int qeth_l3_ethtool_set_rx_csum(struct net_device *dev, u32 data)
 {
-	struct qeth_card *card = netdev_priv(dev);
+	struct qeth_card *card = dev->ml_priv;
 	enum qeth_card_states old_state;
 	enum qeth_checksum_types csum_type;
 
@@ -2825,7 +2850,7 @@ static int qeth_l3_ethtool_set_rx_csum(struct net_device *dev, u32 data)
 
 static int qeth_l3_ethtool_set_tso(struct net_device *dev, u32 data)
 {
-	struct qeth_card *card = netdev_priv(dev);
+	struct qeth_card *card = dev->ml_priv;
 
 	if (data) {
 		if (card->options.large_send == QETH_LARGE_SEND_NO) {
@@ -2915,7 +2940,7 @@ static int qeth_l3_setup_netdev(struct qeth_card *card)
 		return -ENODEV;
 
 	card->dev->hard_start_xmit = qeth_l3_hard_start_xmit;
-	card->dev->priv = card;
+	card->dev->ml_priv = card;
 	card->dev->tx_timeout = &qeth_tx_timeout;
 	card->dev->watchdog_timeo = QETH_TX_TIMEOUT;
 	card->dev->open = qeth_l3_open;
diff --git a/drivers/s390/net/qeth_l3_sys.c b/drivers/s390/net/qeth_l3_sys.c
index ac1993708ae9..210ddb639748 100644
--- a/drivers/s390/net/qeth_l3_sys.c
+++ b/drivers/s390/net/qeth_l3_sys.c
@@ -136,7 +136,7 @@ static ssize_t qeth_l3_dev_route6_store(struct device *dev,
 		return -EINVAL;
 
 	if (!qeth_is_supported(card, IPA_IPV6)) {
-		return -ENOTSUPP;
+		return -EOPNOTSUPP;
 	}
 
 	return qeth_l3_dev_route_store(card, &card->options.route6,
diff --git a/drivers/sbus/sbus.c b/drivers/sbus/sbus.c
index 73a86d09bba8..9c129248466c 100644
--- a/drivers/sbus/sbus.c
+++ b/drivers/sbus/sbus.c
@@ -7,13 +7,13 @@
 #include <linux/slab.h>
 #include <linux/init.h>
 #include <linux/device.h>
+#include <linux/of_device.h>
 
 #include <asm/system.h>
 #include <asm/sbus.h>
 #include <asm/dma.h>
 #include <asm/oplib.h>
 #include <asm/prom.h>
-#include <asm/of_device.h>
 #include <asm/bpp.h>
 #include <asm/irq.h>
 
diff --git a/drivers/scsi/3w-9xxx.c b/drivers/scsi/3w-9xxx.c
index 7045511f9ad2..b92c19bb6876 100644
--- a/drivers/scsi/3w-9xxx.c
+++ b/drivers/scsi/3w-9xxx.c
@@ -4,7 +4,7 @@
    Written By: Adam Radford <linuxraid@amcc.com>
    Modifications By: Tom Couch <linuxraid@amcc.com>
 
-   Copyright (C) 2004-2007 Applied Micro Circuits Corporation.
+   Copyright (C) 2004-2008 Applied Micro Circuits Corporation.
 
    This program is free software; you can redistribute it and/or modify
    it under the terms of the GNU General Public License as published by
@@ -71,6 +71,10 @@
                  Add support for 9650SE controllers.
    2.26.02.009 - Fix dma mask setting to fallback to 32-bit if 64-bit fails.
    2.26.02.010 - Add support for 9690SA controllers.
+   2.26.02.011 - Increase max AENs drained to 256.
+                 Add MSI support and "use_msi" module parameter.
+                 Fix bug in twa_get_param() on 4GB+.
+                 Use pci_resource_len() for ioremap().
 */
 
 #include <linux/module.h>
@@ -95,7 +99,7 @@
 #include "3w-9xxx.h"
 
 /* Globals */
-#define TW_DRIVER_VERSION "2.26.02.010"
+#define TW_DRIVER_VERSION "2.26.02.011"
 static TW_Device_Extension *twa_device_extension_list[TW_MAX_SLOT];
 static unsigned int twa_device_extension_count;
 static int twa_major = -1;
@@ -107,6 +111,10 @@ MODULE_DESCRIPTION ("3ware 9000 Storage Controller Linux Driver");
 MODULE_LICENSE("GPL");
 MODULE_VERSION(TW_DRIVER_VERSION);
 
+static int use_msi = 0;
+module_param(use_msi, int, S_IRUGO);
+MODULE_PARM_DESC(use_msi, "Use Message Signaled Interrupts.  Default: 0");
+
 /* Function prototypes */
 static void twa_aen_queue_event(TW_Device_Extension *tw_dev, TW_Command_Apache_Header *header);
 static int twa_aen_read_queue(TW_Device_Extension *tw_dev, int request_id);
@@ -1038,7 +1046,6 @@ static void *twa_get_param(TW_Device_Extension *tw_dev, int request_id, int tabl
 	TW_Command_Full *full_command_packet;
 	TW_Command *command_packet;
 	TW_Param_Apache *param;
-	unsigned long param_value;
 	void *retval = NULL;
 
 	/* Setup the command packet */
@@ -1057,9 +1064,8 @@ static void *twa_get_param(TW_Device_Extension *tw_dev, int request_id, int tabl
 	param->table_id = cpu_to_le16(table_id | 0x8000);
 	param->parameter_id = cpu_to_le16(parameter_id);
 	param->parameter_size_bytes = cpu_to_le16(parameter_size_bytes);
-	param_value = tw_dev->generic_buffer_phys[request_id];
 
-	command_packet->byte8_offset.param.sgl[0].address = TW_CPU_TO_SGL(param_value);
+	command_packet->byte8_offset.param.sgl[0].address = TW_CPU_TO_SGL(tw_dev->generic_buffer_phys[request_id]);
 	command_packet->byte8_offset.param.sgl[0].length = cpu_to_le32(TW_SECTOR_SIZE);
 
 	/* Post the command packet to the board */
@@ -2000,7 +2006,7 @@ static int __devinit twa_probe(struct pci_dev *pdev, const struct pci_device_id
 {
 	struct Scsi_Host *host = NULL;
 	TW_Device_Extension *tw_dev;
-	u32 mem_addr;
+	unsigned long mem_addr, mem_len;
 	int retval = -ENODEV;
 
 	retval = pci_enable_device(pdev);
@@ -2045,13 +2051,16 @@ static int __devinit twa_probe(struct pci_dev *pdev, const struct pci_device_id
 		goto out_free_device_extension;
 	}
 
-	if (pdev->device == PCI_DEVICE_ID_3WARE_9000)
+	if (pdev->device == PCI_DEVICE_ID_3WARE_9000) {
 		mem_addr = pci_resource_start(pdev, 1);
-	else
+		mem_len = pci_resource_len(pdev, 1);
+	} else {
 		mem_addr = pci_resource_start(pdev, 2);
+		mem_len = pci_resource_len(pdev, 2);
+	}
 
 	/* Save base address */
-	tw_dev->base_addr = ioremap(mem_addr, PAGE_SIZE);
+	tw_dev->base_addr = ioremap(mem_addr, mem_len);
 	if (!tw_dev->base_addr) {
 		TW_PRINTK(tw_dev->host, TW_DRIVER, 0x35, "Failed to ioremap");
 		goto out_release_mem_region;
@@ -2086,7 +2095,7 @@ static int __devinit twa_probe(struct pci_dev *pdev, const struct pci_device_id
 
 	pci_set_drvdata(pdev, host);
 
-	printk(KERN_WARNING "3w-9xxx: scsi%d: Found a 3ware 9000 Storage Controller at 0x%x, IRQ: %d.\n",
+	printk(KERN_WARNING "3w-9xxx: scsi%d: Found a 3ware 9000 Storage Controller at 0x%lx, IRQ: %d.\n",
 	       host->host_no, mem_addr, pdev->irq);
 	printk(KERN_WARNING "3w-9xxx: scsi%d: Firmware %s, BIOS %s, Ports: %d.\n",
 	       host->host_no,
@@ -2097,6 +2106,11 @@ static int __devinit twa_probe(struct pci_dev *pdev, const struct pci_device_id
 	       le32_to_cpu(*(int *)twa_get_param(tw_dev, 2, TW_INFORMATION_TABLE,
 				     TW_PARAM_PORTCOUNT, TW_PARAM_PORTCOUNT_LENGTH)));
 
+	/* Try to enable MSI */
+	if (use_msi && (pdev->device != PCI_DEVICE_ID_3WARE_9000) &&
+	    !pci_enable_msi(pdev))
+		set_bit(TW_USING_MSI, &tw_dev->flags);
+
 	/* Now setup the interrupt handler */
 	retval = request_irq(pdev->irq, twa_interrupt, IRQF_SHARED, "3w-9xxx", tw_dev);
 	if (retval) {
@@ -2120,6 +2134,8 @@ static int __devinit twa_probe(struct pci_dev *pdev, const struct pci_device_id
 	return 0;
 
 out_remove_host:
+	if (test_bit(TW_USING_MSI, &tw_dev->flags))
+		pci_disable_msi(pdev);
 	scsi_remove_host(host);
 out_iounmap:
 	iounmap(tw_dev->base_addr);
@@ -2151,6 +2167,10 @@ static void twa_remove(struct pci_dev *pdev)
 	/* Shutdown the card */
 	__twa_shutdown(tw_dev);
 
+	/* Disable MSI if enabled */
+	if (test_bit(TW_USING_MSI, &tw_dev->flags))
+		pci_disable_msi(pdev);
+
 	/* Free IO remapping */
 	iounmap(tw_dev->base_addr);
 
diff --git a/drivers/scsi/3w-9xxx.h b/drivers/scsi/3w-9xxx.h
index d14a9479e389..1729a8785fea 100644
--- a/drivers/scsi/3w-9xxx.h
+++ b/drivers/scsi/3w-9xxx.h
@@ -4,7 +4,7 @@
    Written By: Adam Radford <linuxraid@amcc.com>
    Modifications By: Tom Couch <linuxraid@amcc.com>
 
-   Copyright (C) 2004-2007 Applied Micro Circuits Corporation.
+   Copyright (C) 2004-2008 Applied Micro Circuits Corporation.
 
    This program is free software; you can redistribute it and/or modify
    it under the terms of the GNU General Public License as published by
@@ -319,8 +319,8 @@ static twa_message_type twa_error_table[] = {
 
 /* Compatibility defines */
 #define TW_9000_ARCH_ID 0x5
-#define TW_CURRENT_DRIVER_SRL 30
-#define TW_CURRENT_DRIVER_BUILD 80
+#define TW_CURRENT_DRIVER_SRL 35
+#define TW_CURRENT_DRIVER_BUILD 0
 #define TW_CURRENT_DRIVER_BRANCH 0
 
 /* Phase defines */
@@ -352,8 +352,9 @@ static twa_message_type twa_error_table[] = {
 #define TW_MAX_RESET_TRIES		      2
 #define TW_MAX_CMDS_PER_LUN		      254
 #define TW_MAX_RESPONSE_DRAIN		      256
-#define TW_MAX_AEN_DRAIN		      40
+#define TW_MAX_AEN_DRAIN		      255
 #define TW_IN_RESET                           2
+#define TW_USING_MSI			      3
 #define TW_IN_ATTENTION_LOOP		      4
 #define TW_MAX_SECTORS                        256
 #define TW_AEN_WAIT_TIME                      1000
diff --git a/drivers/scsi/Kconfig b/drivers/scsi/Kconfig
index 26be540d1dd3..c7f06298bd3c 100644
--- a/drivers/scsi/Kconfig
+++ b/drivers/scsi/Kconfig
@@ -63,6 +63,7 @@ comment "SCSI support type (disk, tape, CD-ROM)"
 config BLK_DEV_SD
 	tristate "SCSI disk support"
 	depends on SCSI
+	select CRC_T10DIF
 	---help---
 	  If you want to use SCSI hard disks, Fibre Channel disks,
 	  Serial ATA (SATA) or Parallel ATA (PATA) hard disks,
diff --git a/drivers/scsi/Makefile b/drivers/scsi/Makefile
index a8149677de23..72fd5043cfa1 100644
--- a/drivers/scsi/Makefile
+++ b/drivers/scsi/Makefile
@@ -151,6 +151,8 @@ scsi_mod-$(CONFIG_SCSI_PROC_FS)	+= scsi_proc.o
 scsi_tgt-y			+= scsi_tgt_lib.o scsi_tgt_if.o
 
 sd_mod-objs	:= sd.o
+sd_mod-$(CONFIG_BLK_DEV_INTEGRITY) += sd_dif.o
+
 sr_mod-objs	:= sr.o sr_ioctl.o sr_vendor.o
 ncr53c8xx-flags-$(CONFIG_SCSI_ZALON) \
 		:= -DCONFIG_NCR53C8XX_PREFETCH -DSCSI_NCR_BIG_ENDIAN \
diff --git a/drivers/scsi/advansys.c b/drivers/scsi/advansys.c
index 8591585e5cc5..218777bfc143 100644
--- a/drivers/scsi/advansys.c
+++ b/drivers/scsi/advansys.c
@@ -2278,7 +2278,7 @@ do { \
 #define ASC_DBG(lvl, format, arg...) {					\
 	if (asc_dbglvl >= (lvl))					\
 		printk(KERN_DEBUG "%s: %s: " format, DRV_NAME,		\
-			__FUNCTION__ , ## arg);				\
+			__func__ , ## arg);				\
 }
 
 #define ASC_DBG_PRT_SCSI_HOST(lvl, s) \
diff --git a/drivers/scsi/aha152x.c b/drivers/scsi/aha152x.c
index 0899cb61e3dd..b5a868d85eb4 100644
--- a/drivers/scsi/aha152x.c
+++ b/drivers/scsi/aha152x.c
@@ -288,20 +288,20 @@ static LIST_HEAD(aha152x_host_list);
 #define DO_LOCK(flags)	\
 	do { \
 		if(spin_is_locked(&QLOCK)) { \
-			DPRINTK(debug_intr, DEBUG_LEAD "(%s:%d) already locked at %s:%d\n", CMDINFO(CURRENT_SC), __FUNCTION__, __LINE__, QLOCKER, QLOCKERL); \
+			DPRINTK(debug_intr, DEBUG_LEAD "(%s:%d) already locked at %s:%d\n", CMDINFO(CURRENT_SC), __func__, __LINE__, QLOCKER, QLOCKERL); \
 		} \
-		DPRINTK(debug_locking, DEBUG_LEAD "(%s:%d) locking\n", CMDINFO(CURRENT_SC), __FUNCTION__, __LINE__); \
+		DPRINTK(debug_locking, DEBUG_LEAD "(%s:%d) locking\n", CMDINFO(CURRENT_SC), __func__, __LINE__); \
 		spin_lock_irqsave(&QLOCK,flags); \
-		DPRINTK(debug_locking, DEBUG_LEAD "(%s:%d) locked\n", CMDINFO(CURRENT_SC), __FUNCTION__, __LINE__); \
-		QLOCKER=__FUNCTION__; \
+		DPRINTK(debug_locking, DEBUG_LEAD "(%s:%d) locked\n", CMDINFO(CURRENT_SC), __func__, __LINE__); \
+		QLOCKER=__func__; \
 		QLOCKERL=__LINE__; \
 	} while(0)
 
 #define DO_UNLOCK(flags)	\
 	do { \
-		DPRINTK(debug_locking, DEBUG_LEAD "(%s:%d) unlocking (locked at %s:%d)\n", CMDINFO(CURRENT_SC), __FUNCTION__, __LINE__, QLOCKER, QLOCKERL); \
+		DPRINTK(debug_locking, DEBUG_LEAD "(%s:%d) unlocking (locked at %s:%d)\n", CMDINFO(CURRENT_SC), __func__, __LINE__, QLOCKER, QLOCKERL); \
 		spin_unlock_irqrestore(&QLOCK,flags); \
-		DPRINTK(debug_locking, DEBUG_LEAD "(%s:%d) unlocked\n", CMDINFO(CURRENT_SC), __FUNCTION__, __LINE__); \
+		DPRINTK(debug_locking, DEBUG_LEAD "(%s:%d) unlocked\n", CMDINFO(CURRENT_SC), __func__, __LINE__); \
 		QLOCKER="(not locked)"; \
 		QLOCKERL=0; \
 	} while(0)
diff --git a/drivers/scsi/aic94xx/aic94xx.h b/drivers/scsi/aic94xx/aic94xx.h
index 2ef459e9cda1..2863a9d22851 100644
--- a/drivers/scsi/aic94xx/aic94xx.h
+++ b/drivers/scsi/aic94xx/aic94xx.h
@@ -39,9 +39,9 @@
 
 #ifdef ASD_ENTER_EXIT
 #define ENTER  printk(KERN_NOTICE "%s: ENTER %s\n", ASD_DRIVER_NAME, \
-		__FUNCTION__)
+		__func__)
 #define EXIT   printk(KERN_NOTICE "%s: --EXIT %s\n", ASD_DRIVER_NAME, \
-		__FUNCTION__)
+		__func__)
 #else
 #define ENTER
 #define EXIT
diff --git a/drivers/scsi/aic94xx/aic94xx_hwi.c b/drivers/scsi/aic94xx/aic94xx_hwi.c
index 83a78222896d..eb9dc3195fdf 100644
--- a/drivers/scsi/aic94xx/aic94xx_hwi.c
+++ b/drivers/scsi/aic94xx/aic94xx_hwi.c
@@ -1359,7 +1359,7 @@ int asd_enable_phys(struct asd_ha_struct *asd_ha, const u8 phy_mask)
 	struct asd_ascb *ascb_list;
 
 	if (!phy_mask) {
-		asd_printk("%s called with phy_mask of 0!?\n", __FUNCTION__);
+		asd_printk("%s called with phy_mask of 0!?\n", __func__);
 		return 0;
 	}
 
diff --git a/drivers/scsi/aic94xx/aic94xx_scb.c b/drivers/scsi/aic94xx/aic94xx_scb.c
index 46643319c520..ca55013b6ae5 100644
--- a/drivers/scsi/aic94xx/aic94xx_scb.c
+++ b/drivers/scsi/aic94xx/aic94xx_scb.c
@@ -211,7 +211,7 @@ static void asd_form_port(struct asd_ha_struct *asd_ha, struct asd_phy *phy)
 		phy->asd_port = port;
 	}
 	ASD_DPRINTK("%s: updating phy_mask 0x%x for phy%d\n",
-		    __FUNCTION__, phy->asd_port->phy_mask, sas_phy->id);
+		    __func__, phy->asd_port->phy_mask, sas_phy->id);
 	asd_update_port_links(asd_ha, phy);
 	spin_unlock_irqrestore(&asd_ha->asd_ports_lock, flags);
 }
@@ -294,7 +294,7 @@ static void asd_link_reset_err_tasklet(struct asd_ascb *ascb,
 		struct asd_ascb *cp = asd_ascb_alloc_list(ascb->ha, &num,
 							  GFP_ATOMIC);
 		if (!cp) {
-			asd_printk("%s: out of memory\n", __FUNCTION__);
+			asd_printk("%s: out of memory\n", __func__);
 			goto out;
 		}
 		ASD_DPRINTK("phy%d: retries:0 performing link reset seq\n",
@@ -446,7 +446,7 @@ static void escb_tasklet_complete(struct asd_ascb *ascb,
 		struct domain_device *failed_dev = NULL;
 
 		ASD_DPRINTK("%s: REQ_TASK_ABORT, reason=0x%X\n",
-			    __FUNCTION__, dl->status_block[3]);
+			    __func__, dl->status_block[3]);
 
 		/*
 		 * Find the task that caused the abort and abort it first.
@@ -474,7 +474,7 @@ static void escb_tasklet_complete(struct asd_ascb *ascb,
 
 		if (!failed_dev) {
 			ASD_DPRINTK("%s: Can't find task (tc=%d) to abort!\n",
-				    __FUNCTION__, tc_abort);
+				    __func__, tc_abort);
 			goto out;
 		}
 
@@ -502,7 +502,7 @@ static void escb_tasklet_complete(struct asd_ascb *ascb,
 		conn_handle = *((u16*)(&dl->status_block[1]));
 		conn_handle = le16_to_cpu(conn_handle);
 
-		ASD_DPRINTK("%s: REQ_DEVICE_RESET, reason=0x%X\n", __FUNCTION__,
+		ASD_DPRINTK("%s: REQ_DEVICE_RESET, reason=0x%X\n", __func__,
 			    dl->status_block[3]);
 
 		/* Find the last pending task for the device... */
@@ -522,7 +522,7 @@ static void escb_tasklet_complete(struct asd_ascb *ascb,
 
 		if (!last_dev_task) {
 			ASD_DPRINTK("%s: Device reset for idle device %d?\n",
-				    __FUNCTION__, conn_handle);
+				    __func__, conn_handle);
 			goto out;
 		}
 
@@ -549,10 +549,10 @@ static void escb_tasklet_complete(struct asd_ascb *ascb,
 		goto out;
 	}
 	case SIGNAL_NCQ_ERROR:
-		ASD_DPRINTK("%s: SIGNAL_NCQ_ERROR\n", __FUNCTION__);
+		ASD_DPRINTK("%s: SIGNAL_NCQ_ERROR\n", __func__);
 		goto out;
 	case CLEAR_NCQ_ERROR:
-		ASD_DPRINTK("%s: CLEAR_NCQ_ERROR\n", __FUNCTION__);
+		ASD_DPRINTK("%s: CLEAR_NCQ_ERROR\n", __func__);
 		goto out;
 	}
 
@@ -560,26 +560,26 @@ static void escb_tasklet_complete(struct asd_ascb *ascb,
 
 	switch (sb_opcode) {
 	case BYTES_DMAED:
-		ASD_DPRINTK("%s: phy%d: BYTES_DMAED\n", __FUNCTION__, phy_id);
+		ASD_DPRINTK("%s: phy%d: BYTES_DMAED\n", __func__, phy_id);
 		asd_bytes_dmaed_tasklet(ascb, dl, edb, phy_id);
 		break;
 	case PRIMITIVE_RECVD:
-		ASD_DPRINTK("%s: phy%d: PRIMITIVE_RECVD\n", __FUNCTION__,
+		ASD_DPRINTK("%s: phy%d: PRIMITIVE_RECVD\n", __func__,
 			    phy_id);
 		asd_primitive_rcvd_tasklet(ascb, dl, phy_id);
 		break;
 	case PHY_EVENT:
-		ASD_DPRINTK("%s: phy%d: PHY_EVENT\n", __FUNCTION__, phy_id);
+		ASD_DPRINTK("%s: phy%d: PHY_EVENT\n", __func__, phy_id);
 		asd_phy_event_tasklet(ascb, dl);
 		break;
 	case LINK_RESET_ERROR:
-		ASD_DPRINTK("%s: phy%d: LINK_RESET_ERROR\n", __FUNCTION__,
+		ASD_DPRINTK("%s: phy%d: LINK_RESET_ERROR\n", __func__,
 			    phy_id);
 		asd_link_reset_err_tasklet(ascb, dl, phy_id);
 		break;
 	case TIMER_EVENT:
 		ASD_DPRINTK("%s: phy%d: TIMER_EVENT, lost dw sync\n",
-			    __FUNCTION__, phy_id);
+			    __func__, phy_id);
 		asd_turn_led(asd_ha, phy_id, 0);
 		/* the device is gone */
 		sas_phy_disconnected(sas_phy);
@@ -587,7 +587,7 @@ static void escb_tasklet_complete(struct asd_ascb *ascb,
 		sas_ha->notify_port_event(sas_phy, PORTE_TIMER_EVENT);
 		break;
 	default:
-		ASD_DPRINTK("%s: phy%d: unknown event:0x%x\n", __FUNCTION__,
+		ASD_DPRINTK("%s: phy%d: unknown event:0x%x\n", __func__,
 			    phy_id, sb_opcode);
 		ASD_DPRINTK("edb is 0x%x! dl->opcode is 0x%x\n",
 			    edb, dl->opcode);
@@ -654,7 +654,7 @@ static void control_phy_tasklet_complete(struct asd_ascb *ascb,
 
 	if (status != 0) {
 		ASD_DPRINTK("%s: phy%d status block opcode:0x%x\n",
-			    __FUNCTION__, phy_id, status);
+			    __func__, phy_id, status);
 		goto out;
 	}
 
@@ -663,7 +663,7 @@ static void control_phy_tasklet_complete(struct asd_ascb *ascb,
 		asd_ha->hw_prof.enabled_phys &= ~(1 << phy_id);
 		asd_turn_led(asd_ha, phy_id, 0);
 		asd_control_led(asd_ha, phy_id, 0);
-		ASD_DPRINTK("%s: disable phy%d\n", __FUNCTION__, phy_id);
+		ASD_DPRINTK("%s: disable phy%d\n", __func__, phy_id);
 		break;
 
 	case ENABLE_PHY:
@@ -673,40 +673,40 @@ static void control_phy_tasklet_complete(struct asd_ascb *ascb,
 			get_lrate_mode(phy, oob_mode);
 			asd_turn_led(asd_ha, phy_id, 1);
 			ASD_DPRINTK("%s: phy%d, lrate:0x%x, proto:0x%x\n",
-				    __FUNCTION__, phy_id,phy->sas_phy.linkrate,
+				    __func__, phy_id,phy->sas_phy.linkrate,
 				    phy->sas_phy.iproto);
 		} else if (oob_status & CURRENT_SPINUP_HOLD) {
 			asd_ha->hw_prof.enabled_phys |= (1 << phy_id);
 			asd_turn_led(asd_ha, phy_id, 1);
-			ASD_DPRINTK("%s: phy%d, spinup hold\n", __FUNCTION__,
+			ASD_DPRINTK("%s: phy%d, spinup hold\n", __func__,
 				    phy_id);
 		} else if (oob_status & CURRENT_ERR_MASK) {
 			asd_turn_led(asd_ha, phy_id, 0);
 			ASD_DPRINTK("%s: phy%d: error: oob status:0x%02x\n",
-				    __FUNCTION__, phy_id, oob_status);
+				    __func__, phy_id, oob_status);
 		} else if (oob_status & (CURRENT_HOT_PLUG_CNCT
 					 | CURRENT_DEVICE_PRESENT))  {
 			asd_ha->hw_prof.enabled_phys |= (1 << phy_id);
 			asd_turn_led(asd_ha, phy_id, 1);
 			ASD_DPRINTK("%s: phy%d: hot plug or device present\n",
-				    __FUNCTION__, phy_id);
+				    __func__, phy_id);
 		} else {
 			asd_ha->hw_prof.enabled_phys |= (1 << phy_id);
 			asd_turn_led(asd_ha, phy_id, 0);
 			ASD_DPRINTK("%s: phy%d: no device present: "
 				    "oob_status:0x%x\n",
-				    __FUNCTION__, phy_id, oob_status);
+				    __func__, phy_id, oob_status);
 		}
 		break;
 	case RELEASE_SPINUP_HOLD:
 	case PHY_NO_OP:
 	case EXECUTE_HARD_RESET:
-		ASD_DPRINTK("%s: phy%d: sub_func:0x%x\n", __FUNCTION__,
+		ASD_DPRINTK("%s: phy%d: sub_func:0x%x\n", __func__,
 			    phy_id, control_phy->sub_func);
 		/* XXX finish */
 		break;
 	default:
-		ASD_DPRINTK("%s: phy%d: sub_func:0x%x?\n", __FUNCTION__,
+		ASD_DPRINTK("%s: phy%d: sub_func:0x%x?\n", __func__,
 			    phy_id, control_phy->sub_func);
 		break;
 	}
diff --git a/drivers/scsi/aic94xx/aic94xx_task.c b/drivers/scsi/aic94xx/aic94xx_task.c
index 326765c9caf8..75d20f72501f 100644
--- a/drivers/scsi/aic94xx/aic94xx_task.c
+++ b/drivers/scsi/aic94xx/aic94xx_task.c
@@ -320,7 +320,7 @@ Again:
 	case TC_RESUME:
 	case TC_PARTIAL_SG_LIST:
 	default:
-		ASD_DPRINTK("%s: dl opcode: 0x%x?\n", __FUNCTION__, opcode);
+		ASD_DPRINTK("%s: dl opcode: 0x%x?\n", __func__, opcode);
 		break;
 	}
 
diff --git a/drivers/scsi/aic94xx/aic94xx_tmf.c b/drivers/scsi/aic94xx/aic94xx_tmf.c
index 633ff40c736a..d4640ef6d44f 100644
--- a/drivers/scsi/aic94xx/aic94xx_tmf.c
+++ b/drivers/scsi/aic94xx/aic94xx_tmf.c
@@ -75,12 +75,12 @@ static void asd_clear_nexus_tasklet_complete(struct asd_ascb *ascb,
 					     struct done_list_struct *dl)
 {
 	struct tasklet_completion_status *tcs = ascb->uldd_task;
-	ASD_DPRINTK("%s: here\n", __FUNCTION__);
+	ASD_DPRINTK("%s: here\n", __func__);
 	if (!del_timer(&ascb->timer)) {
-		ASD_DPRINTK("%s: couldn't delete timer\n", __FUNCTION__);
+		ASD_DPRINTK("%s: couldn't delete timer\n", __func__);
 		return;
 	}
-	ASD_DPRINTK("%s: opcode: 0x%x\n", __FUNCTION__, dl->opcode);
+	ASD_DPRINTK("%s: opcode: 0x%x\n", __func__, dl->opcode);
 	tcs->dl_opcode = dl->opcode;
 	complete(ascb->completion);
 	asd_ascb_free(ascb);
@@ -91,7 +91,7 @@ static void asd_clear_nexus_timedout(unsigned long data)
 	struct asd_ascb *ascb = (void *)data;
 	struct tasklet_completion_status *tcs = ascb->uldd_task;
 
-	ASD_DPRINTK("%s: here\n", __FUNCTION__);
+	ASD_DPRINTK("%s: here\n", __func__);
 	tcs->dl_opcode = TMF_RESP_FUNC_FAILED;
 	complete(ascb->completion);
 }
@@ -103,7 +103,7 @@ static void asd_clear_nexus_timedout(unsigned long data)
 	DECLARE_COMPLETION_ONSTACK(completion); \
 	DECLARE_TCS(tcs); \
 		\
-	ASD_DPRINTK("%s: PRE\n", __FUNCTION__); \
+	ASD_DPRINTK("%s: PRE\n", __func__); \
         res = 1;                \
 	ascb = asd_ascb_alloc_list(asd_ha, &res, GFP_KERNEL); \
 	if (!ascb)              \
@@ -115,12 +115,12 @@ static void asd_clear_nexus_timedout(unsigned long data)
 	scb->header.opcode = CLEAR_NEXUS
 
 #define CLEAR_NEXUS_POST        \
-	ASD_DPRINTK("%s: POST\n", __FUNCTION__); \
+	ASD_DPRINTK("%s: POST\n", __func__); \
 	res = asd_enqueue_internal(ascb, asd_clear_nexus_tasklet_complete, \
 				   asd_clear_nexus_timedout);              \
 	if (res)                \
 		goto out_err;   \
-	ASD_DPRINTK("%s: clear nexus posted, waiting...\n", __FUNCTION__); \
+	ASD_DPRINTK("%s: clear nexus posted, waiting...\n", __func__); \
 	wait_for_completion(&completion); \
 	res = tcs.dl_opcode; \
 	if (res == TC_NO_ERROR) \
@@ -417,7 +417,7 @@ int asd_abort_task(struct sas_task *task)
 	if (task->task_state_flags & SAS_TASK_STATE_DONE) {
 		spin_unlock_irqrestore(&task->task_state_lock, flags);
 		res = TMF_RESP_FUNC_COMPLETE;
-		ASD_DPRINTK("%s: task 0x%p done\n", __FUNCTION__, task);
+		ASD_DPRINTK("%s: task 0x%p done\n", __func__, task);
 		goto out_done;
 	}
 	spin_unlock_irqrestore(&task->task_state_lock, flags);
@@ -481,7 +481,7 @@ int asd_abort_task(struct sas_task *task)
 	if (task->task_state_flags & SAS_TASK_STATE_DONE) {
 		spin_unlock_irqrestore(&task->task_state_lock, flags);
 		res = TMF_RESP_FUNC_COMPLETE;
-		ASD_DPRINTK("%s: task 0x%p done\n", __FUNCTION__, task);
+		ASD_DPRINTK("%s: task 0x%p done\n", __func__, task);
 		goto out_done;
 	}
 	spin_unlock_irqrestore(&task->task_state_lock, flags);
diff --git a/drivers/scsi/arm/acornscsi-io.S b/drivers/scsi/arm/acornscsi-io.S
index 5cebe3105260..22171b2110a8 100644
--- a/drivers/scsi/arm/acornscsi-io.S
+++ b/drivers/scsi/arm/acornscsi-io.S
@@ -8,7 +8,7 @@
 #include <linux/linkage.h>
 
 #include <asm/assembler.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 
 #if defined(__APCS_32__)
 #define LOADREGS(t,r,l...)	ldm##t	r, l
diff --git a/drivers/scsi/arm/fas216.c b/drivers/scsi/arm/fas216.c
index a715632e19d4..477542602284 100644
--- a/drivers/scsi/arm/fas216.c
+++ b/drivers/scsi/arm/fas216.c
@@ -240,7 +240,7 @@ static void __fas216_checkmagic(FAS216_Info *info, const char *func)
 		panic("scsi memory space corrupted in %s", func);
 	}
 }
-#define fas216_checkmagic(info) __fas216_checkmagic((info), __FUNCTION__)
+#define fas216_checkmagic(info) __fas216_checkmagic((info), __func__)
 #else
 #define fas216_checkmagic(info)
 #endif
@@ -2658,7 +2658,7 @@ int fas216_eh_host_reset(struct scsi_cmnd *SCpnt)
 	fas216_checkmagic(info);
 
 	printk("scsi%d.%c: %s: resetting host\n",
-		info->host->host_no, '0' + SCpnt->device->id, __FUNCTION__);
+		info->host->host_no, '0' + SCpnt->device->id, __func__);
 
 	/*
 	 * Reset the SCSI chip.
diff --git a/drivers/scsi/ch.c b/drivers/scsi/ch.c
index aa2011b64683..3c257fe0893e 100644
--- a/drivers/scsi/ch.c
+++ b/drivers/scsi/ch.c
@@ -930,6 +930,7 @@ static int ch_probe(struct device *dev)
 	if (init)
 		ch_init_elem(ch);
 
+	dev_set_drvdata(dev, ch);
 	sdev_printk(KERN_INFO, sd, "Attached scsi changer %s\n", ch->name);
 
 	return 0;
diff --git a/drivers/scsi/device_handler/Kconfig b/drivers/scsi/device_handler/Kconfig
index 2adc0f666b68..67070257919f 100644
--- a/drivers/scsi/device_handler/Kconfig
+++ b/drivers/scsi/device_handler/Kconfig
@@ -30,3 +30,11 @@ config SCSI_DH_EMC
 	depends on SCSI_DH
 	help
 	If you have a EMC CLARiiON select y. Otherwise, say N.
+
+config SCSI_DH_ALUA
+	tristate "SPC-3 ALUA Device Handler (EXPERIMENTAL)"
+	depends on SCSI_DH && EXPERIMENTAL
+	help
+	  SCSI Device handler for generic SPC-3 Asymmetric Logical Unit
+	  Access (ALUA).
+
diff --git a/drivers/scsi/device_handler/Makefile b/drivers/scsi/device_handler/Makefile
index 35272e93b1c8..e1d2ea083e15 100644
--- a/drivers/scsi/device_handler/Makefile
+++ b/drivers/scsi/device_handler/Makefile
@@ -5,3 +5,4 @@ obj-$(CONFIG_SCSI_DH)		+= scsi_dh.o
 obj-$(CONFIG_SCSI_DH_RDAC)	+= scsi_dh_rdac.o
 obj-$(CONFIG_SCSI_DH_HP_SW)	+= scsi_dh_hp_sw.o
 obj-$(CONFIG_SCSI_DH_EMC)	+= scsi_dh_emc.o
+obj-$(CONFIG_SCSI_DH_ALUA)	+= scsi_dh_alua.o
diff --git a/drivers/scsi/device_handler/scsi_dh.c b/drivers/scsi/device_handler/scsi_dh.c
index ab6c21cd9689..a518f2eff19a 100644
--- a/drivers/scsi/device_handler/scsi_dh.c
+++ b/drivers/scsi/device_handler/scsi_dh.c
@@ -24,8 +24,16 @@
 #include <scsi/scsi_dh.h>
 #include "../scsi_priv.h"
 
+struct scsi_dh_devinfo_list {
+	struct list_head node;
+	char vendor[9];
+	char model[17];
+	struct scsi_device_handler *handler;
+};
+
 static DEFINE_SPINLOCK(list_lock);
 static LIST_HEAD(scsi_dh_list);
+static LIST_HEAD(scsi_dh_dev_list);
 
 static struct scsi_device_handler *get_device_handler(const char *name)
 {
@@ -33,7 +41,7 @@ static struct scsi_device_handler *get_device_handler(const char *name)
 
 	spin_lock(&list_lock);
 	list_for_each_entry(tmp, &scsi_dh_list, list) {
-		if (!strcmp(tmp->name, name)) {
+		if (!strncmp(tmp->name, name, strlen(tmp->name))) {
 			found = tmp;
 			break;
 		}
@@ -42,11 +50,307 @@ static struct scsi_device_handler *get_device_handler(const char *name)
 	return found;
 }
 
+
+static struct scsi_device_handler *
+scsi_dh_cache_lookup(struct scsi_device *sdev)
+{
+	struct scsi_dh_devinfo_list *tmp;
+	struct scsi_device_handler *found_dh = NULL;
+
+	spin_lock(&list_lock);
+	list_for_each_entry(tmp, &scsi_dh_dev_list, node) {
+		if (!strncmp(sdev->vendor, tmp->vendor, strlen(tmp->vendor)) &&
+		    !strncmp(sdev->model, tmp->model, strlen(tmp->model))) {
+			found_dh = tmp->handler;
+			break;
+		}
+	}
+	spin_unlock(&list_lock);
+
+	return found_dh;
+}
+
+static int scsi_dh_handler_lookup(struct scsi_device_handler *scsi_dh,
+				  struct scsi_device *sdev)
+{
+	int i, found = 0;
+
+	for(i = 0; scsi_dh->devlist[i].vendor; i++) {
+		if (!strncmp(sdev->vendor, scsi_dh->devlist[i].vendor,
+			     strlen(scsi_dh->devlist[i].vendor)) &&
+		    !strncmp(sdev->model, scsi_dh->devlist[i].model,
+			     strlen(scsi_dh->devlist[i].model))) {
+			found = 1;
+			break;
+		}
+	}
+	return found;
+}
+
+/*
+ * device_handler_match - Attach a device handler to a device
+ * @scsi_dh - The device handler to match against or NULL
+ * @sdev - SCSI device to be tested against @scsi_dh
+ *
+ * Tests @sdev against the device handler @scsi_dh or against
+ * all registered device_handler if @scsi_dh == NULL.
+ * Returns the found device handler or NULL if not found.
+ */
+static struct scsi_device_handler *
+device_handler_match(struct scsi_device_handler *scsi_dh,
+		     struct scsi_device *sdev)
+{
+	struct scsi_device_handler *found_dh = NULL;
+	struct scsi_dh_devinfo_list *tmp;
+
+	found_dh = scsi_dh_cache_lookup(sdev);
+	if (found_dh)
+		return found_dh;
+
+	if (scsi_dh) {
+		if (scsi_dh_handler_lookup(scsi_dh, sdev))
+			found_dh = scsi_dh;
+	} else {
+		struct scsi_device_handler *tmp_dh;
+
+		spin_lock(&list_lock);
+		list_for_each_entry(tmp_dh, &scsi_dh_list, list) {
+			if (scsi_dh_handler_lookup(tmp_dh, sdev))
+				found_dh = tmp_dh;
+		}
+		spin_unlock(&list_lock);
+	}
+
+	if (found_dh) { /* If device is found, add it to the cache */
+		tmp = kmalloc(sizeof(*tmp), GFP_KERNEL);
+		if (tmp) {
+			strncpy(tmp->vendor, sdev->vendor, 8);
+			strncpy(tmp->model, sdev->model, 16);
+			tmp->vendor[8] = '\0';
+			tmp->model[16] = '\0';
+			tmp->handler = found_dh;
+			spin_lock(&list_lock);
+			list_add(&tmp->node, &scsi_dh_dev_list);
+			spin_unlock(&list_lock);
+		} else {
+			found_dh = NULL;
+		}
+	}
+
+	return found_dh;
+}
+
+/*
+ * scsi_dh_handler_attach - Attach a device handler to a device
+ * @sdev - SCSI device the device handler should attach to
+ * @scsi_dh - The device handler to attach
+ */
+static int scsi_dh_handler_attach(struct scsi_device *sdev,
+				  struct scsi_device_handler *scsi_dh)
+{
+	int err = 0;
+
+	if (sdev->scsi_dh_data) {
+		if (sdev->scsi_dh_data->scsi_dh != scsi_dh)
+			err = -EBUSY;
+	} else if (scsi_dh->attach)
+		err = scsi_dh->attach(sdev);
+
+	return err;
+}
+
+/*
+ * scsi_dh_handler_detach - Detach a device handler from a device
+ * @sdev - SCSI device the device handler should be detached from
+ * @scsi_dh - Device handler to be detached
+ *
+ * Detach from a device handler. If a device handler is specified,
+ * only detach if the currently attached handler matches @scsi_dh.
+ */
+static void scsi_dh_handler_detach(struct scsi_device *sdev,
+				   struct scsi_device_handler *scsi_dh)
+{
+	if (!sdev->scsi_dh_data)
+		return;
+
+	if (scsi_dh && scsi_dh != sdev->scsi_dh_data->scsi_dh)
+		return;
+
+	if (!scsi_dh)
+		scsi_dh = sdev->scsi_dh_data->scsi_dh;
+
+	if (scsi_dh && scsi_dh->detach)
+		scsi_dh->detach(sdev);
+}
+
+/*
+ * Functions for sysfs attribute 'dh_state'
+ */
+static ssize_t
+store_dh_state(struct device *dev, struct device_attribute *attr,
+	       const char *buf, size_t count)
+{
+	struct scsi_device *sdev = to_scsi_device(dev);
+	struct scsi_device_handler *scsi_dh;
+	int err = -EINVAL;
+
+	if (!sdev->scsi_dh_data) {
+		/*
+		 * Attach to a device handler
+		 */
+		if (!(scsi_dh = get_device_handler(buf)))
+			return err;
+		err = scsi_dh_handler_attach(sdev, scsi_dh);
+	} else {
+		scsi_dh = sdev->scsi_dh_data->scsi_dh;
+		if (!strncmp(buf, "detach", 6)) {
+			/*
+			 * Detach from a device handler
+			 */
+			scsi_dh_handler_detach(sdev, scsi_dh);
+			err = 0;
+		} else if (!strncmp(buf, "activate", 8)) {
+			/*
+			 * Activate a device handler
+			 */
+			if (scsi_dh->activate)
+				err = scsi_dh->activate(sdev);
+			else
+				err = 0;
+		}
+	}
+
+	return err<0?err:count;
+}
+
+static ssize_t
+show_dh_state(struct device *dev, struct device_attribute *attr, char *buf)
+{
+	struct scsi_device *sdev = to_scsi_device(dev);
+
+	if (!sdev->scsi_dh_data)
+		return snprintf(buf, 20, "detached\n");
+
+	return snprintf(buf, 20, "%s\n", sdev->scsi_dh_data->scsi_dh->name);
+}
+
+static struct device_attribute scsi_dh_state_attr =
+	__ATTR(dh_state, S_IRUGO | S_IWUSR, show_dh_state,
+	       store_dh_state);
+
+/*
+ * scsi_dh_sysfs_attr_add - Callback for scsi_init_dh
+ */
+static int scsi_dh_sysfs_attr_add(struct device *dev, void *data)
+{
+	struct scsi_device *sdev;
+	int err;
+
+	if (!scsi_is_sdev_device(dev))
+		return 0;
+
+	sdev = to_scsi_device(dev);
+
+	err = device_create_file(&sdev->sdev_gendev,
+				 &scsi_dh_state_attr);
+
+	return 0;
+}
+
+/*
+ * scsi_dh_sysfs_attr_remove - Callback for scsi_exit_dh
+ */
+static int scsi_dh_sysfs_attr_remove(struct device *dev, void *data)
+{
+	struct scsi_device *sdev;
+
+	if (!scsi_is_sdev_device(dev))
+		return 0;
+
+	sdev = to_scsi_device(dev);
+
+	device_remove_file(&sdev->sdev_gendev,
+			   &scsi_dh_state_attr);
+
+	return 0;
+}
+
+/*
+ * scsi_dh_notifier - notifier chain callback
+ */
+static int scsi_dh_notifier(struct notifier_block *nb,
+			    unsigned long action, void *data)
+{
+	struct device *dev = data;
+	struct scsi_device *sdev;
+	int err = 0;
+	struct scsi_device_handler *devinfo = NULL;
+
+	if (!scsi_is_sdev_device(dev))
+		return 0;
+
+	sdev = to_scsi_device(dev);
+
+	if (action == BUS_NOTIFY_ADD_DEVICE) {
+		devinfo = device_handler_match(NULL, sdev);
+		if (!devinfo)
+			goto out;
+
+		err = scsi_dh_handler_attach(sdev, devinfo);
+		if (!err)
+			err = device_create_file(dev, &scsi_dh_state_attr);
+	} else if (action == BUS_NOTIFY_DEL_DEVICE) {
+		device_remove_file(dev, &scsi_dh_state_attr);
+		scsi_dh_handler_detach(sdev, NULL);
+	}
+out:
+	return err;
+}
+
+/*
+ * scsi_dh_notifier_add - Callback for scsi_register_device_handler
+ */
 static int scsi_dh_notifier_add(struct device *dev, void *data)
 {
 	struct scsi_device_handler *scsi_dh = data;
+	struct scsi_device *sdev;
+
+	if (!scsi_is_sdev_device(dev))
+		return 0;
+
+	if (!get_device(dev))
+		return 0;
+
+	sdev = to_scsi_device(dev);
+
+	if (device_handler_match(scsi_dh, sdev))
+		scsi_dh_handler_attach(sdev, scsi_dh);
+
+	put_device(dev);
+
+	return 0;
+}
+
+/*
+ * scsi_dh_notifier_remove - Callback for scsi_unregister_device_handler
+ */
+static int scsi_dh_notifier_remove(struct device *dev, void *data)
+{
+	struct scsi_device_handler *scsi_dh = data;
+	struct scsi_device *sdev;
+
+	if (!scsi_is_sdev_device(dev))
+		return 0;
+
+	if (!get_device(dev))
+		return 0;
+
+	sdev = to_scsi_device(dev);
+
+	scsi_dh_handler_detach(sdev, scsi_dh);
+
+	put_device(dev);
 
-	scsi_dh->nb.notifier_call(&scsi_dh->nb, BUS_NOTIFY_ADD_DEVICE, dev);
 	return 0;
 }
 
@@ -59,33 +363,19 @@ static int scsi_dh_notifier_add(struct device *dev, void *data)
  */
 int scsi_register_device_handler(struct scsi_device_handler *scsi_dh)
 {
-	int ret = -EBUSY;
-	struct scsi_device_handler *tmp;
+	if (get_device_handler(scsi_dh->name))
+		return -EBUSY;
 
-	tmp = get_device_handler(scsi_dh->name);
-	if (tmp)
-		goto done;
-
-	ret = bus_register_notifier(&scsi_bus_type, &scsi_dh->nb);
-
-	bus_for_each_dev(&scsi_bus_type, NULL, scsi_dh, scsi_dh_notifier_add);
 	spin_lock(&list_lock);
 	list_add(&scsi_dh->list, &scsi_dh_list);
 	spin_unlock(&list_lock);
+	bus_for_each_dev(&scsi_bus_type, NULL, scsi_dh, scsi_dh_notifier_add);
+	printk(KERN_INFO "%s: device handler registered\n", scsi_dh->name);
 
-done:
-	return ret;
+	return SCSI_DH_OK;
 }
 EXPORT_SYMBOL_GPL(scsi_register_device_handler);
 
-static int scsi_dh_notifier_remove(struct device *dev, void *data)
-{
-	struct scsi_device_handler *scsi_dh = data;
-
-	scsi_dh->nb.notifier_call(&scsi_dh->nb, BUS_NOTIFY_DEL_DEVICE, dev);
-	return 0;
-}
-
 /*
  * scsi_unregister_device_handler - register a device handler personality
  *      module.
@@ -95,23 +385,26 @@ static int scsi_dh_notifier_remove(struct device *dev, void *data)
  */
 int scsi_unregister_device_handler(struct scsi_device_handler *scsi_dh)
 {
-	int ret = -ENODEV;
-	struct scsi_device_handler *tmp;
-
-	tmp = get_device_handler(scsi_dh->name);
-	if (!tmp)
-		goto done;
+	struct scsi_dh_devinfo_list *tmp, *pos;
 
-	ret = bus_unregister_notifier(&scsi_bus_type, &scsi_dh->nb);
+	if (!get_device_handler(scsi_dh->name))
+		return -ENODEV;
 
 	bus_for_each_dev(&scsi_bus_type, NULL, scsi_dh,
-					scsi_dh_notifier_remove);
+			 scsi_dh_notifier_remove);
+
 	spin_lock(&list_lock);
 	list_del(&scsi_dh->list);
+	list_for_each_entry_safe(pos, tmp, &scsi_dh_dev_list, node) {
+		if (pos->handler == scsi_dh) {
+			list_del(&pos->node);
+			kfree(pos);
+		}
+	}
 	spin_unlock(&list_lock);
+	printk(KERN_INFO "%s: device handler unregistered\n", scsi_dh->name);
 
-done:
-	return ret;
+	return SCSI_DH_OK;
 }
 EXPORT_SYMBOL_GPL(scsi_unregister_device_handler);
 
@@ -157,6 +450,97 @@ int scsi_dh_handler_exist(const char *name)
 }
 EXPORT_SYMBOL_GPL(scsi_dh_handler_exist);
 
+/*
+ * scsi_dh_handler_attach - Attach device handler
+ * @sdev - sdev the handler should be attached to
+ * @name - name of the handler to attach
+ */
+int scsi_dh_attach(struct request_queue *q, const char *name)
+{
+	unsigned long flags;
+	struct scsi_device *sdev;
+	struct scsi_device_handler *scsi_dh;
+	int err = 0;
+
+	scsi_dh = get_device_handler(name);
+	if (!scsi_dh)
+		return -EINVAL;
+
+	spin_lock_irqsave(q->queue_lock, flags);
+	sdev = q->queuedata;
+	if (!sdev || !get_device(&sdev->sdev_gendev))
+		err = -ENODEV;
+	spin_unlock_irqrestore(q->queue_lock, flags);
+
+	if (!err) {
+		err = scsi_dh_handler_attach(sdev, scsi_dh);
+
+		put_device(&sdev->sdev_gendev);
+	}
+	return err;
+}
+EXPORT_SYMBOL_GPL(scsi_dh_attach);
+
+/*
+ * scsi_dh_handler_detach - Detach device handler
+ * @sdev - sdev the handler should be detached from
+ *
+ * This function will detach the device handler only
+ * if the sdev is not part of the internal list, ie
+ * if it has been attached manually.
+ */
+void scsi_dh_detach(struct request_queue *q)
+{
+	unsigned long flags;
+	struct scsi_device *sdev;
+	struct scsi_device_handler *scsi_dh = NULL;
+
+	spin_lock_irqsave(q->queue_lock, flags);
+	sdev = q->queuedata;
+	if (!sdev || !get_device(&sdev->sdev_gendev))
+		sdev = NULL;
+	spin_unlock_irqrestore(q->queue_lock, flags);
+
+	if (!sdev)
+		return;
+
+	if (sdev->scsi_dh_data) {
+		/* if sdev is not on internal list, detach */
+		scsi_dh = sdev->scsi_dh_data->scsi_dh;
+		if (!device_handler_match(scsi_dh, sdev))
+			scsi_dh_handler_detach(sdev, scsi_dh);
+	}
+	put_device(&sdev->sdev_gendev);
+}
+EXPORT_SYMBOL_GPL(scsi_dh_detach);
+
+static struct notifier_block scsi_dh_nb = {
+	.notifier_call = scsi_dh_notifier
+};
+
+static int __init scsi_dh_init(void)
+{
+	int r;
+
+	r = bus_register_notifier(&scsi_bus_type, &scsi_dh_nb);
+
+	if (!r)
+		bus_for_each_dev(&scsi_bus_type, NULL, NULL,
+				 scsi_dh_sysfs_attr_add);
+
+	return r;
+}
+
+static void __exit scsi_dh_exit(void)
+{
+	bus_for_each_dev(&scsi_bus_type, NULL, NULL,
+			 scsi_dh_sysfs_attr_remove);
+	bus_unregister_notifier(&scsi_bus_type, &scsi_dh_nb);
+}
+
+module_init(scsi_dh_init);
+module_exit(scsi_dh_exit);
+
 MODULE_DESCRIPTION("SCSI device handler");
 MODULE_AUTHOR("Chandra Seetharaman <sekharan@us.ibm.com>");
 MODULE_LICENSE("GPL");
diff --git a/drivers/scsi/device_handler/scsi_dh_alua.c b/drivers/scsi/device_handler/scsi_dh_alua.c
new file mode 100644
index 000000000000..994da56fffed
--- /dev/null
+++ b/drivers/scsi/device_handler/scsi_dh_alua.c
@@ -0,0 +1,802 @@
+/*
+ * Generic SCSI-3 ALUA SCSI Device Handler
+ *
+ * Copyright (C) 2007, 2008 Hannes Reinecke, SUSE Linux Products GmbH.
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ *
+ */
+#include <scsi/scsi.h>
+#include <scsi/scsi_eh.h>
+#include <scsi/scsi_dh.h>
+
+#define ALUA_DH_NAME "alua"
+#define ALUA_DH_VER "1.2"
+
+#define TPGS_STATE_OPTIMIZED		0x0
+#define TPGS_STATE_NONOPTIMIZED		0x1
+#define TPGS_STATE_STANDBY		0x2
+#define TPGS_STATE_UNAVAILABLE		0x3
+#define TPGS_STATE_OFFLINE		0xe
+#define TPGS_STATE_TRANSITIONING	0xf
+
+#define TPGS_SUPPORT_NONE		0x00
+#define TPGS_SUPPORT_OPTIMIZED		0x01
+#define TPGS_SUPPORT_NONOPTIMIZED	0x02
+#define TPGS_SUPPORT_STANDBY		0x04
+#define TPGS_SUPPORT_UNAVAILABLE	0x08
+#define TPGS_SUPPORT_OFFLINE		0x40
+#define TPGS_SUPPORT_TRANSITION		0x80
+
+#define TPGS_MODE_UNINITIALIZED		 -1
+#define TPGS_MODE_NONE			0x0
+#define TPGS_MODE_IMPLICIT		0x1
+#define TPGS_MODE_EXPLICIT		0x2
+
+#define ALUA_INQUIRY_SIZE		36
+#define ALUA_FAILOVER_TIMEOUT		(60 * HZ)
+#define ALUA_FAILOVER_RETRIES		5
+
+struct alua_dh_data {
+	int			group_id;
+	int			rel_port;
+	int			tpgs;
+	int			state;
+	unsigned char		inq[ALUA_INQUIRY_SIZE];
+	unsigned char		*buff;
+	int			bufflen;
+	unsigned char		sense[SCSI_SENSE_BUFFERSIZE];
+	int			senselen;
+};
+
+#define ALUA_POLICY_SWITCH_CURRENT	0
+#define ALUA_POLICY_SWITCH_ALL		1
+
+static inline struct alua_dh_data *get_alua_data(struct scsi_device *sdev)
+{
+	struct scsi_dh_data *scsi_dh_data = sdev->scsi_dh_data;
+	BUG_ON(scsi_dh_data == NULL);
+	return ((struct alua_dh_data *) scsi_dh_data->buf);
+}
+
+static int realloc_buffer(struct alua_dh_data *h, unsigned len)
+{
+	if (h->buff && h->buff != h->inq)
+		kfree(h->buff);
+
+	h->buff = kmalloc(len, GFP_NOIO);
+	if (!h->buff) {
+		h->buff = h->inq;
+		h->bufflen = ALUA_INQUIRY_SIZE;
+		return 1;
+	}
+	h->bufflen = len;
+	return 0;
+}
+
+static struct request *get_alua_req(struct scsi_device *sdev,
+				    void *buffer, unsigned buflen, int rw)
+{
+	struct request *rq;
+	struct request_queue *q = sdev->request_queue;
+
+	rq = blk_get_request(q, rw, GFP_NOIO);
+
+	if (!rq) {
+		sdev_printk(KERN_INFO, sdev,
+			    "%s: blk_get_request failed\n", __func__);
+		return NULL;
+	}
+
+	if (buflen && blk_rq_map_kern(q, rq, buffer, buflen, GFP_NOIO)) {
+		blk_put_request(rq);
+		sdev_printk(KERN_INFO, sdev,
+			    "%s: blk_rq_map_kern failed\n", __func__);
+		return NULL;
+	}
+
+	rq->cmd_type = REQ_TYPE_BLOCK_PC;
+	rq->cmd_flags |= REQ_FAILFAST | REQ_NOMERGE;
+	rq->retries = ALUA_FAILOVER_RETRIES;
+	rq->timeout = ALUA_FAILOVER_TIMEOUT;
+
+	return rq;
+}
+
+/*
+ * submit_std_inquiry - Issue a standard INQUIRY command
+ * @sdev: sdev the command should be send to
+ */
+static int submit_std_inquiry(struct scsi_device *sdev, struct alua_dh_data *h)
+{
+	struct request *rq;
+	int err = SCSI_DH_RES_TEMP_UNAVAIL;
+
+	rq = get_alua_req(sdev, h->inq, ALUA_INQUIRY_SIZE, READ);
+	if (!rq)
+		goto done;
+
+	/* Prepare the command. */
+	rq->cmd[0] = INQUIRY;
+	rq->cmd[1] = 0;
+	rq->cmd[2] = 0;
+	rq->cmd[4] = ALUA_INQUIRY_SIZE;
+	rq->cmd_len = COMMAND_SIZE(INQUIRY);
+
+	rq->sense = h->sense;
+	memset(rq->sense, 0, SCSI_SENSE_BUFFERSIZE);
+	rq->sense_len = h->senselen = 0;
+
+	err = blk_execute_rq(rq->q, NULL, rq, 1);
+	if (err == -EIO) {
+		sdev_printk(KERN_INFO, sdev,
+			    "%s: std inquiry failed with %x\n",
+			    ALUA_DH_NAME, rq->errors);
+		h->senselen = rq->sense_len;
+		err = SCSI_DH_IO;
+	}
+	blk_put_request(rq);
+done:
+	return err;
+}
+
+/*
+ * submit_vpd_inquiry - Issue an INQUIRY VPD page 0x83 command
+ * @sdev: sdev the command should be sent to
+ */
+static int submit_vpd_inquiry(struct scsi_device *sdev, struct alua_dh_data *h)
+{
+	struct request *rq;
+	int err = SCSI_DH_RES_TEMP_UNAVAIL;
+
+	rq = get_alua_req(sdev, h->buff, h->bufflen, READ);
+	if (!rq)
+		goto done;
+
+	/* Prepare the command. */
+	rq->cmd[0] = INQUIRY;
+	rq->cmd[1] = 1;
+	rq->cmd[2] = 0x83;
+	rq->cmd[4] = h->bufflen;
+	rq->cmd_len = COMMAND_SIZE(INQUIRY);
+
+	rq->sense = h->sense;
+	memset(rq->sense, 0, SCSI_SENSE_BUFFERSIZE);
+	rq->sense_len = h->senselen = 0;
+
+	err = blk_execute_rq(rq->q, NULL, rq, 1);
+	if (err == -EIO) {
+		sdev_printk(KERN_INFO, sdev,
+			    "%s: evpd inquiry failed with %x\n",
+			    ALUA_DH_NAME, rq->errors);
+		h->senselen = rq->sense_len;
+		err = SCSI_DH_IO;
+	}
+	blk_put_request(rq);
+done:
+	return err;
+}
+
+/*
+ * submit_rtpg - Issue a REPORT TARGET GROUP STATES command
+ * @sdev: sdev the command should be sent to
+ */
+static unsigned submit_rtpg(struct scsi_device *sdev, struct alua_dh_data *h)
+{
+	struct request *rq;
+	int err = SCSI_DH_RES_TEMP_UNAVAIL;
+
+	rq = get_alua_req(sdev, h->buff, h->bufflen, READ);
+	if (!rq)
+		goto done;
+
+	/* Prepare the command. */
+	rq->cmd[0] = MAINTENANCE_IN;
+	rq->cmd[1] = MI_REPORT_TARGET_PGS;
+	rq->cmd[6] = (h->bufflen >> 24) & 0xff;
+	rq->cmd[7] = (h->bufflen >> 16) & 0xff;
+	rq->cmd[8] = (h->bufflen >>  8) & 0xff;
+	rq->cmd[9] = h->bufflen & 0xff;
+	rq->cmd_len = COMMAND_SIZE(MAINTENANCE_IN);
+
+	rq->sense = h->sense;
+	memset(rq->sense, 0, SCSI_SENSE_BUFFERSIZE);
+	rq->sense_len = h->senselen = 0;
+
+	err = blk_execute_rq(rq->q, NULL, rq, 1);
+	if (err == -EIO) {
+		sdev_printk(KERN_INFO, sdev,
+			    "%s: rtpg failed with %x\n",
+			    ALUA_DH_NAME, rq->errors);
+		h->senselen = rq->sense_len;
+		err = SCSI_DH_IO;
+	}
+	blk_put_request(rq);
+done:
+	return err;
+}
+
+/*
+ * submit_stpg - Issue a SET TARGET GROUP STATES command
+ * @sdev: sdev the command should be sent to
+ *
+ * Currently we're only setting the current target port group state
+ * to 'active/optimized' and let the array firmware figure out
+ * the states of the remaining groups.
+ */
+static unsigned submit_stpg(struct scsi_device *sdev, struct alua_dh_data *h)
+{
+	struct request *rq;
+	int err = SCSI_DH_RES_TEMP_UNAVAIL;
+	int stpg_len = 8;
+
+	/* Prepare the data buffer */
+	memset(h->buff, 0, stpg_len);
+	h->buff[4] = TPGS_STATE_OPTIMIZED & 0x0f;
+	h->buff[6] = (h->group_id >> 8) & 0x0f;
+	h->buff[7] = h->group_id & 0x0f;
+
+	rq = get_alua_req(sdev, h->buff, stpg_len, WRITE);
+	if (!rq)
+		goto done;
+
+	/* Prepare the command. */
+	rq->cmd[0] = MAINTENANCE_OUT;
+	rq->cmd[1] = MO_SET_TARGET_PGS;
+	rq->cmd[6] = (stpg_len >> 24) & 0xff;
+	rq->cmd[7] = (stpg_len >> 16) & 0xff;
+	rq->cmd[8] = (stpg_len >>  8) & 0xff;
+	rq->cmd[9] = stpg_len & 0xff;
+	rq->cmd_len = COMMAND_SIZE(MAINTENANCE_OUT);
+
+	rq->sense = h->sense;
+	memset(rq->sense, 0, SCSI_SENSE_BUFFERSIZE);
+	rq->sense_len = h->senselen = 0;
+
+	err = blk_execute_rq(rq->q, NULL, rq, 1);
+	if (err == -EIO) {
+		sdev_printk(KERN_INFO, sdev,
+			    "%s: stpg failed with %x\n",
+			    ALUA_DH_NAME, rq->errors);
+		h->senselen = rq->sense_len;
+		err = SCSI_DH_IO;
+	}
+	blk_put_request(rq);
+done:
+	return err;
+}
+
+/*
+ * alua_std_inquiry - Evaluate standard INQUIRY command
+ * @sdev: device to be checked
+ *
+ * Just extract the TPGS setting to find out if ALUA
+ * is supported.
+ */
+static int alua_std_inquiry(struct scsi_device *sdev, struct alua_dh_data *h)
+{
+	int err;
+
+	err = submit_std_inquiry(sdev, h);
+
+	if (err != SCSI_DH_OK)
+		return err;
+
+	/* Check TPGS setting */
+	h->tpgs = (h->inq[5] >> 4) & 0x3;
+	switch (h->tpgs) {
+	case TPGS_MODE_EXPLICIT|TPGS_MODE_IMPLICIT:
+		sdev_printk(KERN_INFO, sdev,
+			    "%s: supports implicit and explicit TPGS\n",
+			    ALUA_DH_NAME);
+		break;
+	case TPGS_MODE_EXPLICIT:
+		sdev_printk(KERN_INFO, sdev, "%s: supports explicit TPGS\n",
+			    ALUA_DH_NAME);
+		break;
+	case TPGS_MODE_IMPLICIT:
+		sdev_printk(KERN_INFO, sdev, "%s: supports implicit TPGS\n",
+			    ALUA_DH_NAME);
+		break;
+	default:
+		h->tpgs = TPGS_MODE_NONE;
+		sdev_printk(KERN_INFO, sdev, "%s: not supported\n",
+			    ALUA_DH_NAME);
+		err = SCSI_DH_DEV_UNSUPP;
+		break;
+	}
+
+	return err;
+}
+
+/*
+ * alua_vpd_inquiry - Evaluate INQUIRY vpd page 0x83
+ * @sdev: device to be checked
+ *
+ * Extract the relative target port and the target port group
+ * descriptor from the list of identificators.
+ */
+static int alua_vpd_inquiry(struct scsi_device *sdev, struct alua_dh_data *h)
+{
+	int len;
+	unsigned err;
+	unsigned char *d;
+
+ retry:
+	err = submit_vpd_inquiry(sdev, h);
+
+	if (err != SCSI_DH_OK)
+		return err;
+
+	/* Check if vpd page exceeds initial buffer */
+	len = (h->buff[2] << 8) + h->buff[3] + 4;
+	if (len > h->bufflen) {
+		/* Resubmit with the correct length */
+		if (realloc_buffer(h, len)) {
+			sdev_printk(KERN_WARNING, sdev,
+				    "%s: kmalloc buffer failed\n",
+				    ALUA_DH_NAME);
+			/* Temporary failure, bypass */
+			return SCSI_DH_DEV_TEMP_BUSY;
+		}
+		goto retry;
+	}
+
+	/*
+	 * Now look for the correct descriptor.
+	 */
+	d = h->buff + 4;
+	while (d < h->buff + len) {
+		switch (d[1] & 0xf) {
+		case 0x4:
+			/* Relative target port */
+			h->rel_port = (d[6] << 8) + d[7];
+			break;
+		case 0x5:
+			/* Target port group */
+			h->group_id = (d[6] << 8) + d[7];
+			break;
+		default:
+			break;
+		}
+		d += d[3] + 4;
+	}
+
+	if (h->group_id == -1) {
+		/*
+		 * Internal error; TPGS supported but required
+		 * VPD identification descriptors not present.
+		 * Disable ALUA support
+		 */
+		sdev_printk(KERN_INFO, sdev,
+			    "%s: No target port descriptors found\n",
+			    ALUA_DH_NAME);
+		h->state = TPGS_STATE_OPTIMIZED;
+		h->tpgs = TPGS_MODE_NONE;
+		err = SCSI_DH_DEV_UNSUPP;
+	} else {
+		sdev_printk(KERN_INFO, sdev,
+			    "%s: port group %02x rel port %02x\n",
+			    ALUA_DH_NAME, h->group_id, h->rel_port);
+	}
+
+	return err;
+}
+
+static char print_alua_state(int state)
+{
+	switch (state) {
+	case TPGS_STATE_OPTIMIZED:
+		return 'A';
+	case TPGS_STATE_NONOPTIMIZED:
+		return 'N';
+	case TPGS_STATE_STANDBY:
+		return 'S';
+	case TPGS_STATE_UNAVAILABLE:
+		return 'U';
+	case TPGS_STATE_OFFLINE:
+		return 'O';
+	case TPGS_STATE_TRANSITIONING:
+		return 'T';
+	default:
+		return 'X';
+	}
+}
+
+static int alua_check_sense(struct scsi_device *sdev,
+			    struct scsi_sense_hdr *sense_hdr)
+{
+	switch (sense_hdr->sense_key) {
+	case NOT_READY:
+		if (sense_hdr->asc == 0x04 && sense_hdr->ascq == 0x0a)
+			/*
+			 * LUN Not Accessible - ALUA state transition
+			 */
+			return NEEDS_RETRY;
+		if (sense_hdr->asc == 0x04 && sense_hdr->ascq == 0x0b)
+			/*
+			 * LUN Not Accessible -- Target port in standby state
+			 */
+			return SUCCESS;
+		if (sense_hdr->asc == 0x04 && sense_hdr->ascq == 0x0c)
+			/*
+			 * LUN Not Accessible -- Target port in unavailable state
+			 */
+			return SUCCESS;
+		if (sense_hdr->asc == 0x04 && sense_hdr->ascq == 0x12)
+			/*
+			 * LUN Not Ready -- Offline
+			 */
+			return SUCCESS;
+		break;
+	case UNIT_ATTENTION:
+		if (sense_hdr->asc == 0x29 && sense_hdr->ascq == 0x00)
+			/*
+			 * Power On, Reset, or Bus Device Reset, just retry.
+			 */
+			return NEEDS_RETRY;
+		if (sense_hdr->asc == 0x2a && sense_hdr->ascq == 0x06) {
+			/*
+			 * ALUA state changed
+			 */
+			return NEEDS_RETRY;
+		}
+		if (sense_hdr->asc == 0x2a && sense_hdr->ascq == 0x07) {
+			/*
+			 * Implicit ALUA state transition failed
+			 */
+			return NEEDS_RETRY;
+		}
+		break;
+	}
+
+	return SCSI_RETURN_NOT_HANDLED;
+}
+
+/*
+ * alua_stpg - Evaluate SET TARGET GROUP STATES
+ * @sdev: the device to be evaluated
+ * @state: the new target group state
+ *
+ * Send a SET TARGET GROUP STATES command to the device.
+ * We only have to test here if we should resubmit the command;
+ * any other error is assumed as a failure.
+ */
+static int alua_stpg(struct scsi_device *sdev, int state,
+		     struct alua_dh_data *h)
+{
+	struct scsi_sense_hdr sense_hdr;
+	unsigned err;
+	int retry = ALUA_FAILOVER_RETRIES;
+
+ retry:
+	err = submit_stpg(sdev, h);
+	if (err == SCSI_DH_IO && h->senselen > 0) {
+		err = scsi_normalize_sense(h->sense, SCSI_SENSE_BUFFERSIZE,
+					   &sense_hdr);
+		if (!err)
+			return SCSI_DH_IO;
+		err = alua_check_sense(sdev, &sense_hdr);
+		if (retry > 0 && err == NEEDS_RETRY) {
+			retry--;
+			goto retry;
+		}
+		sdev_printk(KERN_INFO, sdev,
+			    "%s: stpg sense code: %02x/%02x/%02x\n",
+			    ALUA_DH_NAME, sense_hdr.sense_key,
+			    sense_hdr.asc, sense_hdr.ascq);
+		err = SCSI_DH_IO;
+	}
+	if (err == SCSI_DH_OK) {
+		h->state = state;
+		sdev_printk(KERN_INFO, sdev,
+			    "%s: port group %02x switched to state %c\n",
+			    ALUA_DH_NAME, h->group_id,
+			    print_alua_state(h->state) );
+	}
+	return err;
+}
+
+/*
+ * alua_rtpg - Evaluate REPORT TARGET GROUP STATES
+ * @sdev: the device to be evaluated.
+ *
+ * Evaluate the Target Port Group State.
+ * Returns SCSI_DH_DEV_OFFLINED if the path is
+ * found to be unuseable.
+ */
+static int alua_rtpg(struct scsi_device *sdev, struct alua_dh_data *h)
+{
+	struct scsi_sense_hdr sense_hdr;
+	int len, k, off, valid_states = 0;
+	char *ucp;
+	unsigned err;
+
+ retry:
+	err = submit_rtpg(sdev, h);
+
+	if (err == SCSI_DH_IO && h->senselen > 0) {
+		err = scsi_normalize_sense(h->sense, SCSI_SENSE_BUFFERSIZE,
+					   &sense_hdr);
+		if (!err)
+			return SCSI_DH_IO;
+
+		err = alua_check_sense(sdev, &sense_hdr);
+		if (err == NEEDS_RETRY)
+			goto retry;
+		sdev_printk(KERN_INFO, sdev,
+			    "%s: rtpg sense code %02x/%02x/%02x\n",
+			    ALUA_DH_NAME, sense_hdr.sense_key,
+			    sense_hdr.asc, sense_hdr.ascq);
+		err = SCSI_DH_IO;
+	}
+	if (err != SCSI_DH_OK)
+		return err;
+
+	len = (h->buff[0] << 24) + (h->buff[1] << 16) +
+		(h->buff[2] << 8) + h->buff[3] + 4;
+
+	if (len > h->bufflen) {
+		/* Resubmit with the correct length */
+		if (realloc_buffer(h, len)) {
+			sdev_printk(KERN_WARNING, sdev,
+				    "%s: kmalloc buffer failed\n",__func__);
+			/* Temporary failure, bypass */
+			return SCSI_DH_DEV_TEMP_BUSY;
+		}
+		goto retry;
+	}
+
+	for (k = 4, ucp = h->buff + 4; k < len; k += off, ucp += off) {
+		if (h->group_id == (ucp[2] << 8) + ucp[3]) {
+			h->state = ucp[0] & 0x0f;
+			valid_states = ucp[1];
+		}
+		off = 8 + (ucp[7] * 4);
+	}
+
+	sdev_printk(KERN_INFO, sdev,
+		    "%s: port group %02x state %c supports %c%c%c%c%c%c\n",
+		    ALUA_DH_NAME, h->group_id, print_alua_state(h->state),
+		    valid_states&TPGS_SUPPORT_TRANSITION?'T':'t',
+		    valid_states&TPGS_SUPPORT_OFFLINE?'O':'o',
+		    valid_states&TPGS_SUPPORT_UNAVAILABLE?'U':'u',
+		    valid_states&TPGS_SUPPORT_STANDBY?'S':'s',
+		    valid_states&TPGS_SUPPORT_NONOPTIMIZED?'N':'n',
+		    valid_states&TPGS_SUPPORT_OPTIMIZED?'A':'a');
+
+	if (h->tpgs & TPGS_MODE_EXPLICIT) {
+		switch (h->state) {
+		case TPGS_STATE_TRANSITIONING:
+			/* State transition, retry */
+			goto retry;
+			break;
+		case TPGS_STATE_OFFLINE:
+			/* Path is offline, fail */
+			err = SCSI_DH_DEV_OFFLINED;
+			break;
+		default:
+			break;
+		}
+	} else {
+		/* Only Implicit ALUA support */
+		if (h->state == TPGS_STATE_OPTIMIZED ||
+		    h->state == TPGS_STATE_NONOPTIMIZED ||
+		    h->state == TPGS_STATE_STANDBY)
+			/* Useable path if active */
+			err = SCSI_DH_OK;
+		else
+			/* Path unuseable for unavailable/offline */
+			err = SCSI_DH_DEV_OFFLINED;
+	}
+	return err;
+}
+
+/*
+ * alua_initialize - Initialize ALUA state
+ * @sdev: the device to be initialized
+ *
+ * For the prep_fn to work correctly we have
+ * to initialize the ALUA state for the device.
+ */
+static int alua_initialize(struct scsi_device *sdev, struct alua_dh_data *h)
+{
+	int err;
+
+	err = alua_std_inquiry(sdev, h);
+	if (err != SCSI_DH_OK)
+		goto out;
+
+	err = alua_vpd_inquiry(sdev, h);
+	if (err != SCSI_DH_OK)
+		goto out;
+
+	err = alua_rtpg(sdev, h);
+	if (err != SCSI_DH_OK)
+		goto out;
+
+out:
+	return err;
+}
+
+/*
+ * alua_activate - activate a path
+ * @sdev: device on the path to be activated
+ *
+ * We're currently switching the port group to be activated only and
+ * let the array figure out the rest.
+ * There may be other arrays which require us to switch all port groups
+ * based on a certain policy. But until we actually encounter them it
+ * should be okay.
+ */
+static int alua_activate(struct scsi_device *sdev)
+{
+	struct alua_dh_data *h = get_alua_data(sdev);
+	int err = SCSI_DH_OK;
+
+	if (h->group_id != -1) {
+		err = alua_rtpg(sdev, h);
+		if (err != SCSI_DH_OK)
+			goto out;
+	}
+
+	if (h->tpgs == TPGS_MODE_EXPLICIT && h->state != TPGS_STATE_OPTIMIZED)
+		err = alua_stpg(sdev, TPGS_STATE_OPTIMIZED, h);
+
+out:
+	return err;
+}
+
+/*
+ * alua_prep_fn - request callback
+ *
+ * Fail I/O to all paths not in state
+ * active/optimized or active/non-optimized.
+ */
+static int alua_prep_fn(struct scsi_device *sdev, struct request *req)
+{
+	struct alua_dh_data *h = get_alua_data(sdev);
+	int ret = BLKPREP_OK;
+
+	if (h->state != TPGS_STATE_OPTIMIZED &&
+	    h->state != TPGS_STATE_NONOPTIMIZED) {
+		ret = BLKPREP_KILL;
+		req->cmd_flags |= REQ_QUIET;
+	}
+	return ret;
+
+}
+
+static const struct scsi_dh_devlist alua_dev_list[] = {
+	{"HP", "MSA VOLUME" },
+	{"HP", "HSV101" },
+	{"HP", "HSV111" },
+	{"HP", "HSV200" },
+	{"HP", "HSV210" },
+	{"HP", "HSV300" },
+	{"IBM", "2107900" },
+	{"IBM", "2145" },
+	{"Pillar", "Axiom" },
+	{NULL, NULL}
+};
+
+static int alua_bus_attach(struct scsi_device *sdev);
+static void alua_bus_detach(struct scsi_device *sdev);
+
+static struct scsi_device_handler alua_dh = {
+	.name = ALUA_DH_NAME,
+	.module = THIS_MODULE,
+	.devlist = alua_dev_list,
+	.attach = alua_bus_attach,
+	.detach = alua_bus_detach,
+	.prep_fn = alua_prep_fn,
+	.check_sense = alua_check_sense,
+	.activate = alua_activate,
+};
+
+/*
+ * alua_bus_attach - Attach device handler
+ * @sdev: device to be attached to
+ */
+static int alua_bus_attach(struct scsi_device *sdev)
+{
+	struct scsi_dh_data *scsi_dh_data;
+	struct alua_dh_data *h;
+	unsigned long flags;
+	int err = SCSI_DH_OK;
+
+	scsi_dh_data = kzalloc(sizeof(struct scsi_device_handler *)
+			       + sizeof(*h) , GFP_KERNEL);
+	if (!scsi_dh_data) {
+		sdev_printk(KERN_ERR, sdev, "%s: Attach failed\n",
+			    ALUA_DH_NAME);
+		return -ENOMEM;
+	}
+
+	scsi_dh_data->scsi_dh = &alua_dh;
+	h = (struct alua_dh_data *) scsi_dh_data->buf;
+	h->tpgs = TPGS_MODE_UNINITIALIZED;
+	h->state = TPGS_STATE_OPTIMIZED;
+	h->group_id = -1;
+	h->rel_port = -1;
+	h->buff = h->inq;
+	h->bufflen = ALUA_INQUIRY_SIZE;
+
+	err = alua_initialize(sdev, h);
+	if (err != SCSI_DH_OK)
+		goto failed;
+
+	if (!try_module_get(THIS_MODULE))
+		goto failed;
+
+	spin_lock_irqsave(sdev->request_queue->queue_lock, flags);
+	sdev->scsi_dh_data = scsi_dh_data;
+	spin_unlock_irqrestore(sdev->request_queue->queue_lock, flags);
+
+	return 0;
+
+failed:
+	kfree(scsi_dh_data);
+	sdev_printk(KERN_ERR, sdev, "%s: not attached\n", ALUA_DH_NAME);
+	return -EINVAL;
+}
+
+/*
+ * alua_bus_detach - Detach device handler
+ * @sdev: device to be detached from
+ */
+static void alua_bus_detach(struct scsi_device *sdev)
+{
+	struct scsi_dh_data *scsi_dh_data;
+	struct alua_dh_data *h;
+	unsigned long flags;
+
+	spin_lock_irqsave(sdev->request_queue->queue_lock, flags);
+	scsi_dh_data = sdev->scsi_dh_data;
+	sdev->scsi_dh_data = NULL;
+	spin_unlock_irqrestore(sdev->request_queue->queue_lock, flags);
+
+	h = (struct alua_dh_data *) scsi_dh_data->buf;
+	if (h->buff && h->inq != h->buff)
+		kfree(h->buff);
+	kfree(scsi_dh_data);
+	module_put(THIS_MODULE);
+	sdev_printk(KERN_NOTICE, sdev, "%s: Detached\n", ALUA_DH_NAME);
+}
+
+static int __init alua_init(void)
+{
+	int r;
+
+	r = scsi_register_device_handler(&alua_dh);
+	if (r != 0)
+		printk(KERN_ERR "%s: Failed to register scsi device handler",
+			ALUA_DH_NAME);
+	return r;
+}
+
+static void __exit alua_exit(void)
+{
+	scsi_unregister_device_handler(&alua_dh);
+}
+
+module_init(alua_init);
+module_exit(alua_exit);
+
+MODULE_DESCRIPTION("DM Multipath ALUA support");
+MODULE_AUTHOR("Hannes Reinecke <hare@suse.de>");
+MODULE_LICENSE("GPL");
+MODULE_VERSION(ALUA_DH_VER);
diff --git a/drivers/scsi/device_handler/scsi_dh_emc.c b/drivers/scsi/device_handler/scsi_dh_emc.c
index f2467e936e55..b9d23e9e9a44 100644
--- a/drivers/scsi/device_handler/scsi_dh_emc.c
+++ b/drivers/scsi/device_handler/scsi_dh_emc.c
@@ -25,28 +25,31 @@
 #include <scsi/scsi_dh.h>
 #include <scsi/scsi_device.h>
 
-#define CLARIION_NAME			"emc_clariion"
+#define CLARIION_NAME			"emc"
 
 #define CLARIION_TRESPASS_PAGE		0x22
-#define CLARIION_BUFFER_SIZE		0x80
+#define CLARIION_BUFFER_SIZE		0xFC
 #define CLARIION_TIMEOUT		(60 * HZ)
 #define CLARIION_RETRIES		3
 #define CLARIION_UNBOUND_LU		-1
+#define CLARIION_SP_A			0
+#define CLARIION_SP_B			1
 
-static unsigned char long_trespass[] = {
-	0, 0, 0, 0,
-	CLARIION_TRESPASS_PAGE,	/* Page code */
-	0x09,			/* Page length - 2 */
-	0x81,			/* Trespass code + Honor reservation bit */
-	0xff, 0xff,		/* Trespass target */
-	0, 0, 0, 0, 0, 0	/* Reserved bytes / unknown */
-};
+/* Flags */
+#define CLARIION_SHORT_TRESPASS		1
+#define CLARIION_HONOR_RESERVATIONS	2
 
-static unsigned char long_trespass_hr[] = {
-	0, 0, 0, 0,
+/* LUN states */
+#define CLARIION_LUN_UNINITIALIZED	-1
+#define CLARIION_LUN_UNBOUND		0
+#define CLARIION_LUN_BOUND		1
+#define CLARIION_LUN_OWNED		2
+
+static unsigned char long_trespass[] = {
+	0, 0, 0, 0, 0, 0, 0, 0,
 	CLARIION_TRESPASS_PAGE,	/* Page code */
 	0x09,			/* Page length - 2 */
-	0x01,			/* Trespass code + Honor reservation bit */
+	0x01,			/* Trespass code */
 	0xff, 0xff,		/* Trespass target */
 	0, 0, 0, 0, 0, 0	/* Reserved bytes / unknown */
 };
@@ -55,39 +58,56 @@ static unsigned char short_trespass[] = {
 	0, 0, 0, 0,
 	CLARIION_TRESPASS_PAGE,	/* Page code */
 	0x02,			/* Page length - 2 */
-	0x81,			/* Trespass code + Honor reservation bit */
+	0x01,			/* Trespass code */
 	0xff,			/* Trespass target */
 };
 
-static unsigned char short_trespass_hr[] = {
-	0, 0, 0, 0,
-	CLARIION_TRESPASS_PAGE,	/* Page code */
-	0x02,			/* Page length - 2 */
-	0x01,			/* Trespass code + Honor reservation bit */
-	0xff,			/* Trespass target */
+static const char * lun_state[] =
+{
+    "not bound",
+    "bound",
+    "owned",
 };
 
 struct clariion_dh_data {
 	/*
+	 * Flags:
+	 *  CLARIION_SHORT_TRESPASS
 	 * Use short trespass command (FC-series) or the long version
 	 * (default for AX/CX CLARiiON arrays).
-	 */
-	unsigned short_trespass;
-	/*
+	 *
+	 *  CLARIION_HONOR_RESERVATIONS
 	 * Whether or not (default) to honor SCSI reservations when
 	 * initiating a switch-over.
 	 */
-	unsigned hr;
-	/* I/O buffer for both MODE_SELECT and INQUIRY commands. */
+	unsigned flags;
+	/*
+	 * I/O buffer for both MODE_SELECT and INQUIRY commands.
+	 */
 	char buffer[CLARIION_BUFFER_SIZE];
 	/*
 	 * SCSI sense buffer for commands -- assumes serial issuance
 	 * and completion sequence of all commands for same multipath.
 	 */
 	unsigned char sense[SCSI_SENSE_BUFFERSIZE];
-	/* which SP (A=0,B=1,UNBOUND=-1) is dflt SP for path's mapped dev */
+	unsigned int senselen;
+	/*
+	 * LUN state
+	 */
+	int lun_state;
+	/*
+	 * SP Port number
+	 */
+	int port;
+	/*
+	 * which SP (A=0,B=1,UNBOUND=-1) is the default SP for this
+	 * path's mapped LUN
+	 */
 	int default_sp;
-	/* which SP (A=0,B=1,UNBOUND=-1) is active for path's mapped dev */
+	/*
+	 * which SP (A=0,B=1,UNBOUND=-1) is the active SP for this
+	 * path's mapped LUN
+	 */
 	int current_sp;
 };
 
@@ -102,19 +122,16 @@ static inline struct clariion_dh_data
 /*
  * Parse MODE_SELECT cmd reply.
  */
-static int trespass_endio(struct scsi_device *sdev, int result)
+static int trespass_endio(struct scsi_device *sdev, char *sense)
 {
-	int err = SCSI_DH_OK;
+	int err = SCSI_DH_IO;
 	struct scsi_sense_hdr sshdr;
-	struct clariion_dh_data *csdev = get_clariion_data(sdev);
-	char *sense = csdev->sense;
 
-	if (status_byte(result) == CHECK_CONDITION &&
-	    scsi_normalize_sense(sense, SCSI_SENSE_BUFFERSIZE, &sshdr)) {
-		sdev_printk(KERN_ERR, sdev, "Found valid sense data 0x%2x, "
+	if (!scsi_normalize_sense(sense, SCSI_SENSE_BUFFERSIZE, &sshdr)) {
+		sdev_printk(KERN_ERR, sdev, "%s: Found valid sense data 0x%2x, "
 			    "0x%2x, 0x%2x while sending CLARiiON trespass "
-			    "command.\n", sshdr.sense_key, sshdr.asc,
-			     sshdr.ascq);
+			    "command.\n", CLARIION_NAME, sshdr.sense_key,
+			    sshdr.asc, sshdr.ascq);
 
 		if ((sshdr.sense_key == 0x05) && (sshdr.asc == 0x04) &&
 		     (sshdr.ascq == 0x00)) {
@@ -122,9 +139,9 @@ static int trespass_endio(struct scsi_device *sdev, int result)
 			 * Array based copy in progress -- do not send
 			 * mode_select or copy will be aborted mid-stream.
 			 */
-			sdev_printk(KERN_INFO, sdev, "Array Based Copy in "
+			sdev_printk(KERN_INFO, sdev, "%s: Array Based Copy in "
 				    "progress while sending CLARiiON trespass "
-				    "command.\n");
+				    "command.\n", CLARIION_NAME);
 			err = SCSI_DH_DEV_TEMP_BUSY;
 		} else if ((sshdr.sense_key == 0x02) && (sshdr.asc == 0x04) &&
 			    (sshdr.ascq == 0x03)) {
@@ -132,160 +149,153 @@ static int trespass_endio(struct scsi_device *sdev, int result)
 			 * LUN Not Ready - Manual Intervention Required
 			 * indicates in-progress ucode upgrade (NDU).
 			 */
-			sdev_printk(KERN_INFO, sdev, "Detected in-progress "
+			sdev_printk(KERN_INFO, sdev, "%s: Detected in-progress "
 				    "ucode upgrade NDU operation while sending "
-				    "CLARiiON trespass command.\n");
+				    "CLARiiON trespass command.\n", CLARIION_NAME);
 			err = SCSI_DH_DEV_TEMP_BUSY;
 		} else
 			err = SCSI_DH_DEV_FAILED;
-	} else if (result) {
-		sdev_printk(KERN_ERR, sdev, "Error 0x%x while sending "
-			    "CLARiiON trespass command.\n", result);
-		err = SCSI_DH_IO;
+	} else {
+		sdev_printk(KERN_INFO, sdev,
+			    "%s: failed to send MODE SELECT, no sense available\n",
+			    CLARIION_NAME);
 	}
-
 	return err;
 }
 
-static int parse_sp_info_reply(struct scsi_device *sdev, int result,
-		int *default_sp, int *current_sp, int *new_current_sp)
+static int parse_sp_info_reply(struct scsi_device *sdev,
+			       struct clariion_dh_data *csdev)
 {
 	int err = SCSI_DH_OK;
-	struct clariion_dh_data *csdev = get_clariion_data(sdev);
 
-	if (result == 0) {
-		/* check for in-progress ucode upgrade (NDU) */
-		if (csdev->buffer[48] != 0) {
-			sdev_printk(KERN_NOTICE, sdev, "Detected in-progress "
-			       "ucode upgrade NDU operation while finding "
-			       "current active SP.");
-			err = SCSI_DH_DEV_TEMP_BUSY;
-		} else {
-			*default_sp = csdev->buffer[5];
-
-			if (csdev->buffer[4] == 2)
-				/* SP for path is current */
-				*current_sp = csdev->buffer[8];
-			else {
-				if (csdev->buffer[4] == 1)
-					/* SP for this path is NOT current */
-					if (csdev->buffer[8] == 0)
-						*current_sp = 1;
-					else
-						*current_sp = 0;
-				else
-					/* unbound LU or LUNZ */
-					*current_sp = CLARIION_UNBOUND_LU;
-			}
-			*new_current_sp =  csdev->buffer[8];
-		}
-	} else {
-		struct scsi_sense_hdr sshdr;
-
-		err = SCSI_DH_IO;
-
-		if (scsi_normalize_sense(csdev->sense, SCSI_SENSE_BUFFERSIZE,
-							   &sshdr))
-			sdev_printk(KERN_ERR, sdev, "Found valid sense data "
-			      "0x%2x, 0x%2x, 0x%2x while finding current "
-			      "active SP.", sshdr.sense_key, sshdr.asc,
-			      sshdr.ascq);
-		else
-			sdev_printk(KERN_ERR, sdev, "Error 0x%x finding "
-			      "current active SP.", result);
+	/* check for in-progress ucode upgrade (NDU) */
+	if (csdev->buffer[48] != 0) {
+		sdev_printk(KERN_NOTICE, sdev, "%s: Detected in-progress "
+			    "ucode upgrade NDU operation while finding "
+			    "current active SP.", CLARIION_NAME);
+		err = SCSI_DH_DEV_TEMP_BUSY;
+		goto out;
+	}
+	if (csdev->buffer[4] < 0 || csdev->buffer[4] > 2) {
+		/* Invalid buffer format */
+		sdev_printk(KERN_NOTICE, sdev,
+			    "%s: invalid VPD page 0xC0 format\n",
+			    CLARIION_NAME);
+		err = SCSI_DH_NOSYS;
+		goto out;
+	}
+	switch (csdev->buffer[28] & 0x0f) {
+	case 6:
+		sdev_printk(KERN_NOTICE, sdev,
+			    "%s: ALUA failover mode detected\n",
+			    CLARIION_NAME);
+		break;
+	case 4:
+		/* Linux failover */
+		break;
+	default:
+		sdev_printk(KERN_WARNING, sdev,
+			    "%s: Invalid failover mode %d\n",
+			    CLARIION_NAME, csdev->buffer[28] & 0x0f);
+		err = SCSI_DH_NOSYS;
+		goto out;
 	}
 
+	csdev->default_sp = csdev->buffer[5];
+	csdev->lun_state = csdev->buffer[4];
+	csdev->current_sp = csdev->buffer[8];
+	csdev->port = csdev->buffer[7];
+
+out:
 	return err;
 }
 
-static int sp_info_endio(struct scsi_device *sdev, int result,
-					int mode_select_sent, int *done)
+#define emc_default_str "FC (Legacy)"
+
+static char * parse_sp_model(struct scsi_device *sdev, unsigned char *buffer)
 {
-	struct clariion_dh_data *csdev = get_clariion_data(sdev);
-	int err_flags, default_sp, current_sp, new_current_sp;
+	unsigned char len = buffer[4] + 5;
+	char *sp_model = NULL;
+	unsigned char sp_len, serial_len;
+
+	if (len < 160) {
+		sdev_printk(KERN_WARNING, sdev,
+			    "%s: Invalid information section length %d\n",
+			    CLARIION_NAME, len);
+		/* Check for old FC arrays */
+		if (!strncmp(buffer + 8, "DGC", 3)) {
+			/* Old FC array, not supporting extended information */
+			sp_model = emc_default_str;
+		}
+		goto out;
+	}
 
-	err_flags = parse_sp_info_reply(sdev, result, &default_sp,
-					     &current_sp, &new_current_sp);
+	/*
+	 * Parse extended information for SP model number
+	 */
+	serial_len = buffer[160];
+	if (serial_len == 0 || serial_len + 161 > len) {
+		sdev_printk(KERN_WARNING, sdev,
+			    "%s: Invalid array serial number length %d\n",
+			    CLARIION_NAME, serial_len);
+		goto out;
+	}
+	sp_len = buffer[99];
+	if (sp_len == 0 || serial_len + sp_len + 161 > len) {
+		sdev_printk(KERN_WARNING, sdev,
+			    "%s: Invalid model number length %d\n",
+			    CLARIION_NAME, sp_len);
+		goto out;
+	}
+	sp_model = &buffer[serial_len + 161];
+	/* Strip whitespace at the end */
+	while (sp_len > 1 && sp_model[sp_len - 1] == ' ')
+		sp_len--;
 
-	if (err_flags != SCSI_DH_OK)
-		goto done;
+	sp_model[sp_len] = '\0';
 
-	if (mode_select_sent) {
-		csdev->default_sp = default_sp;
-		csdev->current_sp = current_sp;
-	} else {
-		/*
-		 * Issue the actual module_selec request IFF either
-		 * (1) we do not know the identity of the current SP OR
-		 * (2) what we think we know is actually correct.
-		 */
-		if ((current_sp != CLARIION_UNBOUND_LU) &&
-		    (new_current_sp != current_sp)) {
-
-			csdev->default_sp = default_sp;
-			csdev->current_sp = current_sp;
-
-			sdev_printk(KERN_INFO, sdev, "Ignoring path group "
-			       "switch-over command for CLARiiON SP%s since "
-			       " mapped device is already initialized.",
-			       current_sp ? "B" : "A");
-			if (done)
-				*done = 1; /* as good as doing it */
-		}
-	}
-done:
-	return err_flags;
+out:
+	return sp_model;
 }
 
 /*
-* Get block request for REQ_BLOCK_PC command issued to path.  Currently
-* limited to MODE_SELECT (trespass) and INQUIRY (VPD page 0xC0) commands.
-*
-* Uses data and sense buffers in hardware handler context structure and
-* assumes serial servicing of commands, both issuance and completion.
-*/
-static struct request *get_req(struct scsi_device *sdev, int cmd)
+ * Get block request for REQ_BLOCK_PC command issued to path.  Currently
+ * limited to MODE_SELECT (trespass) and INQUIRY (VPD page 0xC0) commands.
+ *
+ * Uses data and sense buffers in hardware handler context structure and
+ * assumes serial servicing of commands, both issuance and completion.
+ */
+static struct request *get_req(struct scsi_device *sdev, int cmd,
+				unsigned char *buffer)
 {
-	struct clariion_dh_data *csdev = get_clariion_data(sdev);
 	struct request *rq;
-	unsigned char *page22;
 	int len = 0;
 
 	rq = blk_get_request(sdev->request_queue,
-			(cmd == MODE_SELECT) ? WRITE : READ, GFP_ATOMIC);
+			(cmd == MODE_SELECT) ? WRITE : READ, GFP_NOIO);
 	if (!rq) {
 		sdev_printk(KERN_INFO, sdev, "get_req: blk_get_request failed");
 		return NULL;
 	}
 
-	memset(&rq->cmd, 0, BLK_MAX_CDB);
+	memset(rq->cmd, 0, BLK_MAX_CDB);
+	rq->cmd_len = COMMAND_SIZE(cmd);
 	rq->cmd[0] = cmd;
-	rq->cmd_len = COMMAND_SIZE(rq->cmd[0]);
 
 	switch (cmd) {
 	case MODE_SELECT:
-		if (csdev->short_trespass) {
-			page22 = csdev->hr ? short_trespass_hr : short_trespass;
-			len = sizeof(short_trespass);
-		} else {
-			page22 = csdev->hr ? long_trespass_hr : long_trespass;
-			len = sizeof(long_trespass);
-		}
-		/*
-		 * Can't DMA from kernel BSS -- must copy selected trespass
-		 * command mode page contents to context buffer which is
-		 * allocated by kmalloc.
-		 */
-		BUG_ON((len > CLARIION_BUFFER_SIZE));
-		memcpy(csdev->buffer, page22, len);
+		len = sizeof(short_trespass);
+		rq->cmd_flags |= REQ_RW;
+		rq->cmd[1] = 0x10;
+		break;
+	case MODE_SELECT_10:
+		len = sizeof(long_trespass);
 		rq->cmd_flags |= REQ_RW;
 		rq->cmd[1] = 0x10;
 		break;
 	case INQUIRY:
-		rq->cmd[1] = 0x1;
-		rq->cmd[2] = 0xC0;
 		len = CLARIION_BUFFER_SIZE;
-		memset(csdev->buffer, 0, CLARIION_BUFFER_SIZE);
+		memset(buffer, 0, len);
 		break;
 	default:
 		BUG_ON(1);
@@ -298,47 +308,94 @@ static struct request *get_req(struct scsi_device *sdev, int cmd)
 	rq->timeout = CLARIION_TIMEOUT;
 	rq->retries = CLARIION_RETRIES;
 
-	rq->sense = csdev->sense;
-	memset(rq->sense, 0, SCSI_SENSE_BUFFERSIZE);
-	rq->sense_len = 0;
-
-	if (blk_rq_map_kern(sdev->request_queue, rq, csdev->buffer,
-							len, GFP_ATOMIC)) {
-		__blk_put_request(rq->q, rq);
+	if (blk_rq_map_kern(rq->q, rq, buffer, len, GFP_NOIO)) {
+		blk_put_request(rq);
 		return NULL;
 	}
 
 	return rq;
 }
 
-static int send_cmd(struct scsi_device *sdev, int cmd)
+static int send_inquiry_cmd(struct scsi_device *sdev, int page,
+			    struct clariion_dh_data *csdev)
 {
-	struct request *rq = get_req(sdev, cmd);
+	struct request *rq = get_req(sdev, INQUIRY, csdev->buffer);
+	int err;
 
 	if (!rq)
 		return SCSI_DH_RES_TEMP_UNAVAIL;
 
-	return blk_execute_rq(sdev->request_queue, NULL, rq, 1);
+	rq->sense = csdev->sense;
+	memset(rq->sense, 0, SCSI_SENSE_BUFFERSIZE);
+	rq->sense_len = csdev->senselen = 0;
+
+	rq->cmd[0] = INQUIRY;
+	if (page != 0) {
+		rq->cmd[1] = 1;
+		rq->cmd[2] = page;
+	}
+	err = blk_execute_rq(sdev->request_queue, NULL, rq, 1);
+	if (err == -EIO) {
+		sdev_printk(KERN_INFO, sdev,
+			    "%s: failed to send %s INQUIRY: %x\n",
+			    CLARIION_NAME, page?"EVPD":"standard",
+			    rq->errors);
+		csdev->senselen = rq->sense_len;
+		err = SCSI_DH_IO;
+	}
+
+	blk_put_request(rq);
+
+	return err;
 }
 
-static int clariion_activate(struct scsi_device *sdev)
+static int send_trespass_cmd(struct scsi_device *sdev,
+			    struct clariion_dh_data *csdev)
 {
-	int result, done = 0;
+	struct request *rq;
+	unsigned char *page22;
+	int err, len, cmd;
+
+	if (csdev->flags & CLARIION_SHORT_TRESPASS) {
+		page22 = short_trespass;
+		if (!(csdev->flags & CLARIION_HONOR_RESERVATIONS))
+			/* Set Honor Reservations bit */
+			page22[6] |= 0x80;
+		len = sizeof(short_trespass);
+		cmd = MODE_SELECT;
+	} else {
+		page22 = long_trespass;
+		if (!(csdev->flags & CLARIION_HONOR_RESERVATIONS))
+			/* Set Honor Reservations bit */
+			page22[10] |= 0x80;
+		len = sizeof(long_trespass);
+		cmd = MODE_SELECT_10;
+	}
+	BUG_ON((len > CLARIION_BUFFER_SIZE));
+	memcpy(csdev->buffer, page22, len);
 
-	result = send_cmd(sdev, INQUIRY);
-	result = sp_info_endio(sdev, result, 0, &done);
-	if (result || done)
-		goto done;
+	rq = get_req(sdev, cmd, csdev->buffer);
+	if (!rq)
+		return SCSI_DH_RES_TEMP_UNAVAIL;
 
-	result = send_cmd(sdev, MODE_SELECT);
-	result = trespass_endio(sdev, result);
-	if (result)
-		goto done;
+	rq->sense = csdev->sense;
+	memset(rq->sense, 0, SCSI_SENSE_BUFFERSIZE);
+	rq->sense_len = csdev->senselen = 0;
 
-	result = send_cmd(sdev, INQUIRY);
-	result = sp_info_endio(sdev, result, 1, NULL);
-done:
-	return result;
+	err = blk_execute_rq(sdev->request_queue, NULL, rq, 1);
+	if (err == -EIO) {
+		if (rq->sense_len) {
+			err = trespass_endio(sdev, csdev->sense);
+		} else {
+			sdev_printk(KERN_INFO, sdev,
+				    "%s: failed to send MODE SELECT: %x\n",
+				    CLARIION_NAME, rq->errors);
+		}
+	}
+
+	blk_put_request(rq);
+
+	return err;
 }
 
 static int clariion_check_sense(struct scsi_device *sdev,
@@ -386,99 +443,215 @@ static int clariion_check_sense(struct scsi_device *sdev,
 		break;
 	}
 
-	/* success just means we do not care what scsi-ml does */
-	return SUCCESS;
+	return SCSI_RETURN_NOT_HANDLED;
+}
+
+static int clariion_prep_fn(struct scsi_device *sdev, struct request *req)
+{
+	struct clariion_dh_data *h = get_clariion_data(sdev);
+	int ret = BLKPREP_OK;
+
+	if (h->lun_state != CLARIION_LUN_OWNED) {
+		ret = BLKPREP_KILL;
+		req->cmd_flags |= REQ_QUIET;
+	}
+	return ret;
+
+}
+
+static int clariion_std_inquiry(struct scsi_device *sdev,
+				struct clariion_dh_data *csdev)
+{
+	int err;
+	char *sp_model;
+
+	err = send_inquiry_cmd(sdev, 0, csdev);
+	if (err != SCSI_DH_OK && csdev->senselen) {
+		struct scsi_sense_hdr sshdr;
+
+		if (scsi_normalize_sense(csdev->sense, SCSI_SENSE_BUFFERSIZE,
+					 &sshdr)) {
+			sdev_printk(KERN_ERR, sdev, "%s: INQUIRY sense code "
+				    "%02x/%02x/%02x\n", CLARIION_NAME,
+				    sshdr.sense_key, sshdr.asc, sshdr.ascq);
+		}
+		err = SCSI_DH_IO;
+		goto out;
+	}
+
+	sp_model = parse_sp_model(sdev, csdev->buffer);
+	if (!sp_model) {
+		err = SCSI_DH_DEV_UNSUPP;
+		goto out;
+	}
+
+	/*
+	 * FC Series arrays do not support long trespass
+	 */
+	if (!strlen(sp_model) || !strncmp(sp_model, "FC",2))
+		csdev->flags |= CLARIION_SHORT_TRESPASS;
+
+	sdev_printk(KERN_INFO, sdev,
+		    "%s: detected Clariion %s, flags %x\n",
+		    CLARIION_NAME, sp_model, csdev->flags);
+out:
+	return err;
 }
 
-static const struct {
-	char *vendor;
-	char *model;
-} clariion_dev_list[] = {
+static int clariion_send_inquiry(struct scsi_device *sdev,
+				 struct clariion_dh_data *csdev)
+{
+	int err, retry = CLARIION_RETRIES;
+
+retry:
+	err = send_inquiry_cmd(sdev, 0xC0, csdev);
+	if (err != SCSI_DH_OK && csdev->senselen) {
+		struct scsi_sense_hdr sshdr;
+
+		err = scsi_normalize_sense(csdev->sense, SCSI_SENSE_BUFFERSIZE,
+					   &sshdr);
+		if (!err)
+			return SCSI_DH_IO;
+
+		err = clariion_check_sense(sdev, &sshdr);
+		if (retry > 0 && err == NEEDS_RETRY) {
+			retry--;
+			goto retry;
+		}
+		sdev_printk(KERN_ERR, sdev, "%s: INQUIRY sense code "
+			    "%02x/%02x/%02x\n", CLARIION_NAME,
+			      sshdr.sense_key, sshdr.asc, sshdr.ascq);
+		err = SCSI_DH_IO;
+	} else {
+		err = parse_sp_info_reply(sdev, csdev);
+	}
+	return err;
+}
+
+static int clariion_activate(struct scsi_device *sdev)
+{
+	struct clariion_dh_data *csdev = get_clariion_data(sdev);
+	int result;
+
+	result = clariion_send_inquiry(sdev, csdev);
+	if (result != SCSI_DH_OK)
+		goto done;
+
+	if (csdev->lun_state == CLARIION_LUN_OWNED)
+		goto done;
+
+	result = send_trespass_cmd(sdev, csdev);
+	if (result != SCSI_DH_OK)
+		goto done;
+	sdev_printk(KERN_INFO, sdev,"%s: %s trespass command sent\n",
+		    CLARIION_NAME,
+		    csdev->flags&CLARIION_SHORT_TRESPASS?"short":"long" );
+
+	/* Update status */
+	result = clariion_send_inquiry(sdev, csdev);
+	if (result != SCSI_DH_OK)
+		goto done;
+
+done:
+	sdev_printk(KERN_INFO, sdev,
+		    "%s: at SP %c Port %d (%s, default SP %c)\n",
+		    CLARIION_NAME, csdev->current_sp + 'A',
+		    csdev->port, lun_state[csdev->lun_state],
+		    csdev->default_sp + 'A');
+
+	return result;
+}
+
+static const struct scsi_dh_devlist clariion_dev_list[] = {
 	{"DGC", "RAID"},
 	{"DGC", "DISK"},
+	{"DGC", "VRAID"},
 	{NULL, NULL},
 };
 
-static int clariion_bus_notify(struct notifier_block *, unsigned long, void *);
+static int clariion_bus_attach(struct scsi_device *sdev);
+static void clariion_bus_detach(struct scsi_device *sdev);
 
 static struct scsi_device_handler clariion_dh = {
 	.name		= CLARIION_NAME,
 	.module		= THIS_MODULE,
-	.nb.notifier_call = clariion_bus_notify,
+	.devlist	= clariion_dev_list,
+	.attach		= clariion_bus_attach,
+	.detach		= clariion_bus_detach,
 	.check_sense	= clariion_check_sense,
 	.activate	= clariion_activate,
+	.prep_fn	= clariion_prep_fn,
 };
 
 /*
  * TODO: need some interface so we can set trespass values
  */
-static int clariion_bus_notify(struct notifier_block *nb,
-				unsigned long action, void *data)
+static int clariion_bus_attach(struct scsi_device *sdev)
 {
-	struct device *dev = data;
-	struct scsi_device *sdev;
 	struct scsi_dh_data *scsi_dh_data;
 	struct clariion_dh_data *h;
-	int i, found = 0;
 	unsigned long flags;
+	int err;
 
-	if (!scsi_is_sdev_device(dev))
-		return 0;
+	scsi_dh_data = kzalloc(sizeof(struct scsi_device_handler *)
+			       + sizeof(*h) , GFP_KERNEL);
+	if (!scsi_dh_data) {
+		sdev_printk(KERN_ERR, sdev, "%s: Attach failed\n",
+			    CLARIION_NAME);
+		return -ENOMEM;
+	}
 
-	sdev = to_scsi_device(dev);
+	scsi_dh_data->scsi_dh = &clariion_dh;
+	h = (struct clariion_dh_data *) scsi_dh_data->buf;
+	h->lun_state = CLARIION_LUN_UNINITIALIZED;
+	h->default_sp = CLARIION_UNBOUND_LU;
+	h->current_sp = CLARIION_UNBOUND_LU;
 
-	if (action == BUS_NOTIFY_ADD_DEVICE) {
-		for (i = 0; clariion_dev_list[i].vendor; i++) {
-			if (!strncmp(sdev->vendor, clariion_dev_list[i].vendor,
-				     strlen(clariion_dev_list[i].vendor)) &&
-			    !strncmp(sdev->model, clariion_dev_list[i].model,
-				     strlen(clariion_dev_list[i].model))) {
-				found = 1;
-				break;
-			}
-		}
-		if (!found)
-			goto out;
-
-		scsi_dh_data = kzalloc(sizeof(struct scsi_device_handler *)
-				+ sizeof(*h) , GFP_KERNEL);
-		if (!scsi_dh_data) {
-			sdev_printk(KERN_ERR, sdev, "Attach failed %s.\n",
-				    CLARIION_NAME);
-			goto out;
-		}
+	err = clariion_std_inquiry(sdev, h);
+	if (err != SCSI_DH_OK)
+		goto failed;
 
-		scsi_dh_data->scsi_dh = &clariion_dh;
-		h = (struct clariion_dh_data *) scsi_dh_data->buf;
-		h->default_sp = CLARIION_UNBOUND_LU;
-		h->current_sp = CLARIION_UNBOUND_LU;
+	err = clariion_send_inquiry(sdev, h);
+	if (err != SCSI_DH_OK)
+		goto failed;
 
-		spin_lock_irqsave(sdev->request_queue->queue_lock, flags);
-		sdev->scsi_dh_data = scsi_dh_data;
-		spin_unlock_irqrestore(sdev->request_queue->queue_lock, flags);
+	if (!try_module_get(THIS_MODULE))
+		goto failed;
 
-		sdev_printk(KERN_NOTICE, sdev, "Attached %s.\n", CLARIION_NAME);
-		try_module_get(THIS_MODULE);
+	spin_lock_irqsave(sdev->request_queue->queue_lock, flags);
+	sdev->scsi_dh_data = scsi_dh_data;
+	spin_unlock_irqrestore(sdev->request_queue->queue_lock, flags);
 
-	} else if (action == BUS_NOTIFY_DEL_DEVICE) {
-		if (sdev->scsi_dh_data == NULL ||
-				sdev->scsi_dh_data->scsi_dh != &clariion_dh)
-			goto out;
+	sdev_printk(KERN_INFO, sdev,
+		    "%s: connected to SP %c Port %d (%s, default SP %c)\n",
+		    CLARIION_NAME, h->current_sp + 'A',
+		    h->port, lun_state[h->lun_state],
+		    h->default_sp + 'A');
 
-		spin_lock_irqsave(sdev->request_queue->queue_lock, flags);
-		scsi_dh_data = sdev->scsi_dh_data;
-		sdev->scsi_dh_data = NULL;
-		spin_unlock_irqrestore(sdev->request_queue->queue_lock, flags);
+	return 0;
 
-		sdev_printk(KERN_NOTICE, sdev, "Dettached %s.\n",
-			    CLARIION_NAME);
+failed:
+	kfree(scsi_dh_data);
+	sdev_printk(KERN_ERR, sdev, "%s: not attached\n",
+		    CLARIION_NAME);
+	return -EINVAL;
+}
 
-		kfree(scsi_dh_data);
-		module_put(THIS_MODULE);
-	}
+static void clariion_bus_detach(struct scsi_device *sdev)
+{
+	struct scsi_dh_data *scsi_dh_data;
+	unsigned long flags;
 
-out:
-	return 0;
+	spin_lock_irqsave(sdev->request_queue->queue_lock, flags);
+	scsi_dh_data = sdev->scsi_dh_data;
+	sdev->scsi_dh_data = NULL;
+	spin_unlock_irqrestore(sdev->request_queue->queue_lock, flags);
+
+	sdev_printk(KERN_NOTICE, sdev, "%s: Detached\n",
+		    CLARIION_NAME);
+
+	kfree(scsi_dh_data);
+	module_put(THIS_MODULE);
 }
 
 static int __init clariion_init(void)
@@ -487,7 +660,8 @@ static int __init clariion_init(void)
 
 	r = scsi_register_device_handler(&clariion_dh);
 	if (r != 0)
-		printk(KERN_ERR "Failed to register scsi device handler.");
+		printk(KERN_ERR "%s: Failed to register scsi device handler.",
+			CLARIION_NAME);
 	return r;
 }
 
diff --git a/drivers/scsi/device_handler/scsi_dh_hp_sw.c b/drivers/scsi/device_handler/scsi_dh_hp_sw.c
index ae6be87d6a83..a6a4ef3ad51c 100644
--- a/drivers/scsi/device_handler/scsi_dh_hp_sw.c
+++ b/drivers/scsi/device_handler/scsi_dh_hp_sw.c
@@ -4,6 +4,7 @@
  *
  * Copyright (C) 2006 Red Hat, Inc.  All rights reserved.
  * Copyright (C) 2006 Mike Christie
+ * Copyright (C) 2008 Hannes Reinecke <hare@suse.de>
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -25,13 +26,18 @@
 #include <scsi/scsi_eh.h>
 #include <scsi/scsi_dh.h>
 
-#define HP_SW_NAME	"hp_sw"
+#define HP_SW_NAME			"hp_sw"
 
-#define HP_SW_TIMEOUT (60 * HZ)
-#define HP_SW_RETRIES 3
+#define HP_SW_TIMEOUT			(60 * HZ)
+#define HP_SW_RETRIES			3
+
+#define HP_SW_PATH_UNINITIALIZED	-1
+#define HP_SW_PATH_ACTIVE		0
+#define HP_SW_PATH_PASSIVE		1
 
 struct hp_sw_dh_data {
 	unsigned char sense[SCSI_SENSE_BUFFERSIZE];
+	int path_state;
 	int retries;
 };
 
@@ -42,51 +48,161 @@ static inline struct hp_sw_dh_data *get_hp_sw_data(struct scsi_device *sdev)
 	return ((struct hp_sw_dh_data *) scsi_dh_data->buf);
 }
 
-static int hp_sw_done(struct scsi_device *sdev)
+/*
+ * tur_done - Handle TEST UNIT READY return status
+ * @sdev: sdev the command has been sent to
+ * @errors: blk error code
+ *
+ * Returns SCSI_DH_DEV_OFFLINED if the sdev is on the passive path
+ */
+static int tur_done(struct scsi_device *sdev, unsigned char *sense)
 {
-	struct hp_sw_dh_data *h = get_hp_sw_data(sdev);
 	struct scsi_sense_hdr sshdr;
-	int rc;
-
-	sdev_printk(KERN_INFO, sdev, "hp_sw_done\n");
+	int ret;
 
-	rc = scsi_normalize_sense(h->sense, SCSI_SENSE_BUFFERSIZE, &sshdr);
-	if (!rc)
+	ret = scsi_normalize_sense(sense, SCSI_SENSE_BUFFERSIZE, &sshdr);
+	if (!ret) {
+		sdev_printk(KERN_WARNING, sdev,
+			    "%s: sending tur failed, no sense available\n",
+			    HP_SW_NAME);
+		ret = SCSI_DH_IO;
 		goto done;
+	}
 	switch (sshdr.sense_key) {
+	case UNIT_ATTENTION:
+		ret = SCSI_DH_IMM_RETRY;
+		break;
 	case NOT_READY:
-		if ((sshdr.asc == 0x04) && (sshdr.ascq == 3)) {
-			rc = SCSI_DH_RETRY;
-			h->retries++;
+		if ((sshdr.asc == 0x04) && (sshdr.ascq == 2)) {
+			/*
+			 * LUN not ready - Initialization command required
+			 *
+			 * This is the passive path
+			 */
+			ret = SCSI_DH_DEV_OFFLINED;
 			break;
 		}
-		/* fall through */
+		/* Fallthrough */
 	default:
-		h->retries++;
-		rc = SCSI_DH_IMM_RETRY;
+		sdev_printk(KERN_WARNING, sdev,
+			   "%s: sending tur failed, sense %x/%x/%x\n",
+			   HP_SW_NAME, sshdr.sense_key, sshdr.asc,
+			   sshdr.ascq);
+		break;
 	}
 
 done:
-	if (rc == SCSI_DH_OK || rc == SCSI_DH_IO)
-		h->retries = 0;
-	else if (h->retries > HP_SW_RETRIES) {
-		h->retries = 0;
+	return ret;
+}
+
+/*
+ * hp_sw_tur - Send TEST UNIT READY
+ * @sdev: sdev command should be sent to
+ *
+ * Use the TEST UNIT READY command to determine
+ * the path state.
+ */
+static int hp_sw_tur(struct scsi_device *sdev, struct hp_sw_dh_data *h)
+{
+	struct request *req;
+	int ret;
+
+	req = blk_get_request(sdev->request_queue, WRITE, GFP_NOIO);
+	if (!req)
+		return SCSI_DH_RES_TEMP_UNAVAIL;
+
+	req->cmd_type = REQ_TYPE_BLOCK_PC;
+	req->cmd_flags |= REQ_FAILFAST;
+	req->cmd_len = COMMAND_SIZE(TEST_UNIT_READY);
+	memset(req->cmd, 0, MAX_COMMAND_SIZE);
+	req->cmd[0] = TEST_UNIT_READY;
+	req->timeout = HP_SW_TIMEOUT;
+	req->sense = h->sense;
+	memset(req->sense, 0, SCSI_SENSE_BUFFERSIZE);
+	req->sense_len = 0;
+
+retry:
+	ret = blk_execute_rq(req->q, NULL, req, 1);
+	if (ret == -EIO) {
+		if (req->sense_len > 0) {
+			ret = tur_done(sdev, h->sense);
+		} else {
+			sdev_printk(KERN_WARNING, sdev,
+				    "%s: sending tur failed with %x\n",
+				    HP_SW_NAME, req->errors);
+			ret = SCSI_DH_IO;
+		}
+	} else {
+		h->path_state = HP_SW_PATH_ACTIVE;
+		ret = SCSI_DH_OK;
+	}
+	if (ret == SCSI_DH_IMM_RETRY)
+		goto retry;
+	if (ret == SCSI_DH_DEV_OFFLINED) {
+		h->path_state = HP_SW_PATH_PASSIVE;
+		ret = SCSI_DH_OK;
+	}
+
+	blk_put_request(req);
+
+	return ret;
+}
+
+/*
+ * start_done - Handle START STOP UNIT return status
+ * @sdev: sdev the command has been sent to
+ * @errors: blk error code
+ */
+static int start_done(struct scsi_device *sdev, unsigned char *sense)
+{
+	struct scsi_sense_hdr sshdr;
+	int rc;
+
+	rc = scsi_normalize_sense(sense, SCSI_SENSE_BUFFERSIZE, &sshdr);
+	if (!rc) {
+		sdev_printk(KERN_WARNING, sdev,
+			    "%s: sending start_stop_unit failed, "
+			    "no sense available\n",
+			    HP_SW_NAME);
+		return SCSI_DH_IO;
+	}
+	switch (sshdr.sense_key) {
+	case NOT_READY:
+		if ((sshdr.asc == 0x04) && (sshdr.ascq == 3)) {
+			/*
+			 * LUN not ready - manual intervention required
+			 *
+			 * Switch-over in progress, retry.
+			 */
+			rc = SCSI_DH_RETRY;
+			break;
+		}
+		/* fall through */
+	default:
+		sdev_printk(KERN_WARNING, sdev,
+			   "%s: sending start_stop_unit failed, sense %x/%x/%x\n",
+			   HP_SW_NAME, sshdr.sense_key, sshdr.asc,
+			   sshdr.ascq);
 		rc = SCSI_DH_IO;
 	}
+
 	return rc;
 }
 
-static int hp_sw_activate(struct scsi_device *sdev)
+/*
+ * hp_sw_start_stop - Send START STOP UNIT command
+ * @sdev: sdev command should be sent to
+ *
+ * Sending START STOP UNIT activates the SP.
+ */
+static int hp_sw_start_stop(struct scsi_device *sdev, struct hp_sw_dh_data *h)
 {
-	struct hp_sw_dh_data *h = get_hp_sw_data(sdev);
 	struct request *req;
-	int ret = SCSI_DH_RES_TEMP_UNAVAIL;
+	int ret, retry;
 
-	req = blk_get_request(sdev->request_queue, WRITE, GFP_ATOMIC);
+	req = blk_get_request(sdev->request_queue, WRITE, GFP_NOIO);
 	if (!req)
-		goto done;
-
-	sdev_printk(KERN_INFO, sdev, "sending START_STOP.");
+		return SCSI_DH_RES_TEMP_UNAVAIL;
 
 	req->cmd_type = REQ_TYPE_BLOCK_PC;
 	req->cmd_flags |= REQ_FAILFAST;
@@ -98,95 +214,153 @@ static int hp_sw_activate(struct scsi_device *sdev)
 	req->sense = h->sense;
 	memset(req->sense, 0, SCSI_SENSE_BUFFERSIZE);
 	req->sense_len = 0;
+	retry = h->retries;
 
+retry:
 	ret = blk_execute_rq(req->q, NULL, req, 1);
-	if (!ret) /* SUCCESS */
-		ret = hp_sw_done(sdev);
-	else
+	if (ret == -EIO) {
+		if (req->sense_len > 0) {
+			ret = start_done(sdev, h->sense);
+		} else {
+			sdev_printk(KERN_WARNING, sdev,
+				    "%s: sending start_stop_unit failed with %x\n",
+				    HP_SW_NAME, req->errors);
+			ret = SCSI_DH_IO;
+		}
+	} else
+		ret = SCSI_DH_OK;
+
+	if (ret == SCSI_DH_RETRY) {
+		if (--retry)
+			goto retry;
 		ret = SCSI_DH_IO;
-done:
+	}
+
+	blk_put_request(req);
+
+	return ret;
+}
+
+static int hp_sw_prep_fn(struct scsi_device *sdev, struct request *req)
+{
+	struct hp_sw_dh_data *h = get_hp_sw_data(sdev);
+	int ret = BLKPREP_OK;
+
+	if (h->path_state != HP_SW_PATH_ACTIVE) {
+		ret = BLKPREP_KILL;
+		req->cmd_flags |= REQ_QUIET;
+	}
+	return ret;
+
+}
+
+/*
+ * hp_sw_activate - Activate a path
+ * @sdev: sdev on the path to be activated
+ *
+ * The HP Active/Passive firmware is pretty simple;
+ * the passive path reports NOT READY with sense codes
+ * 0x04/0x02; a START STOP UNIT command will then
+ * activate the passive path (and deactivate the
+ * previously active one).
+ */
+static int hp_sw_activate(struct scsi_device *sdev)
+{
+	int ret = SCSI_DH_OK;
+	struct hp_sw_dh_data *h = get_hp_sw_data(sdev);
+
+	ret = hp_sw_tur(sdev, h);
+
+	if (ret == SCSI_DH_OK && h->path_state == HP_SW_PATH_PASSIVE) {
+		ret = hp_sw_start_stop(sdev, h);
+		if (ret == SCSI_DH_OK)
+			sdev_printk(KERN_INFO, sdev,
+				    "%s: activated path\n",
+				    HP_SW_NAME);
+	}
+
 	return ret;
 }
 
-static const struct {
-	char *vendor;
-	char *model;
-} hp_sw_dh_data_list[] = {
-	{"COMPAQ", "MSA"},
-	{"HP", "HSV"},
+static const struct scsi_dh_devlist hp_sw_dh_data_list[] = {
+	{"COMPAQ", "MSA1000 VOLUME"},
+	{"COMPAQ", "HSV110"},
+	{"HP", "HSV100"},
 	{"DEC", "HSG80"},
 	{NULL, NULL},
 };
 
-static int hp_sw_bus_notify(struct notifier_block *, unsigned long, void *);
+static int hp_sw_bus_attach(struct scsi_device *sdev);
+static void hp_sw_bus_detach(struct scsi_device *sdev);
 
 static struct scsi_device_handler hp_sw_dh = {
 	.name		= HP_SW_NAME,
 	.module		= THIS_MODULE,
-	.nb.notifier_call = hp_sw_bus_notify,
+	.devlist	= hp_sw_dh_data_list,
+	.attach		= hp_sw_bus_attach,
+	.detach		= hp_sw_bus_detach,
 	.activate	= hp_sw_activate,
+	.prep_fn	= hp_sw_prep_fn,
 };
 
-static int hp_sw_bus_notify(struct notifier_block *nb,
-			    unsigned long action, void *data)
+static int hp_sw_bus_attach(struct scsi_device *sdev)
 {
-	struct device *dev = data;
-	struct scsi_device *sdev;
 	struct scsi_dh_data *scsi_dh_data;
-	int i, found = 0;
+	struct hp_sw_dh_data *h;
 	unsigned long flags;
+	int ret;
 
-	if (!scsi_is_sdev_device(dev))
+	scsi_dh_data = kzalloc(sizeof(struct scsi_device_handler *)
+			       + sizeof(struct hp_sw_dh_data) , GFP_KERNEL);
+	if (!scsi_dh_data) {
+		sdev_printk(KERN_ERR, sdev, "%s: Attach Failed\n",
+			    HP_SW_NAME);
 		return 0;
+	}
 
-	sdev = to_scsi_device(dev);
-
-	if (action == BUS_NOTIFY_ADD_DEVICE) {
-		for (i = 0; hp_sw_dh_data_list[i].vendor; i++) {
-			if (!strncmp(sdev->vendor, hp_sw_dh_data_list[i].vendor,
-				     strlen(hp_sw_dh_data_list[i].vendor)) &&
-			    !strncmp(sdev->model, hp_sw_dh_data_list[i].model,
-				     strlen(hp_sw_dh_data_list[i].model))) {
-				found = 1;
-				break;
-			}
-		}
-		if (!found)
-			goto out;
+	scsi_dh_data->scsi_dh = &hp_sw_dh;
+	h = (struct hp_sw_dh_data *) scsi_dh_data->buf;
+	h->path_state = HP_SW_PATH_UNINITIALIZED;
+	h->retries = HP_SW_RETRIES;
 
-		scsi_dh_data = kzalloc(sizeof(struct scsi_device_handler *)
-				+ sizeof(struct hp_sw_dh_data) , GFP_KERNEL);
-		if (!scsi_dh_data) {
-			sdev_printk(KERN_ERR, sdev, "Attach Failed %s.\n",
-				    HP_SW_NAME);
-			goto out;
-		}
+	ret = hp_sw_tur(sdev, h);
+	if (ret != SCSI_DH_OK || h->path_state == HP_SW_PATH_UNINITIALIZED)
+		goto failed;
 
-		scsi_dh_data->scsi_dh = &hp_sw_dh;
-		spin_lock_irqsave(sdev->request_queue->queue_lock, flags);
-		sdev->scsi_dh_data = scsi_dh_data;
-		spin_unlock_irqrestore(sdev->request_queue->queue_lock, flags);
-		try_module_get(THIS_MODULE);
+	if (!try_module_get(THIS_MODULE))
+		goto failed;
 
-		sdev_printk(KERN_NOTICE, sdev, "Attached %s.\n", HP_SW_NAME);
-	} else if (action == BUS_NOTIFY_DEL_DEVICE) {
-		if (sdev->scsi_dh_data == NULL ||
-				sdev->scsi_dh_data->scsi_dh != &hp_sw_dh)
-			goto out;
+	spin_lock_irqsave(sdev->request_queue->queue_lock, flags);
+	sdev->scsi_dh_data = scsi_dh_data;
+	spin_unlock_irqrestore(sdev->request_queue->queue_lock, flags);
 
-		spin_lock_irqsave(sdev->request_queue->queue_lock, flags);
-		scsi_dh_data = sdev->scsi_dh_data;
-		sdev->scsi_dh_data = NULL;
-		spin_unlock_irqrestore(sdev->request_queue->queue_lock, flags);
-		module_put(THIS_MODULE);
+	sdev_printk(KERN_INFO, sdev, "%s: attached to %s path\n",
+		    HP_SW_NAME, h->path_state == HP_SW_PATH_ACTIVE?
+		    "active":"passive");
 
-		sdev_printk(KERN_NOTICE, sdev, "Dettached %s.\n", HP_SW_NAME);
+	return 0;
 
-		kfree(scsi_dh_data);
-	}
+failed:
+	kfree(scsi_dh_data);
+	sdev_printk(KERN_ERR, sdev, "%s: not attached\n",
+		    HP_SW_NAME);
+	return -EINVAL;
+}
 
-out:
-	return 0;
+static void hp_sw_bus_detach( struct scsi_device *sdev )
+{
+	struct scsi_dh_data *scsi_dh_data;
+	unsigned long flags;
+
+	spin_lock_irqsave(sdev->request_queue->queue_lock, flags);
+	scsi_dh_data = sdev->scsi_dh_data;
+	sdev->scsi_dh_data = NULL;
+	spin_unlock_irqrestore(sdev->request_queue->queue_lock, flags);
+	module_put(THIS_MODULE);
+
+	sdev_printk(KERN_NOTICE, sdev, "%s: Detached\n", HP_SW_NAME);
+
+	kfree(scsi_dh_data);
 }
 
 static int __init hp_sw_init(void)
@@ -202,6 +376,6 @@ static void __exit hp_sw_exit(void)
 module_init(hp_sw_init);
 module_exit(hp_sw_exit);
 
-MODULE_DESCRIPTION("HP MSA 1000");
+MODULE_DESCRIPTION("HP Active/Passive driver");
 MODULE_AUTHOR("Mike Christie <michaelc@cs.wisc.edu");
 MODULE_LICENSE("GPL");
diff --git a/drivers/scsi/device_handler/scsi_dh_rdac.c b/drivers/scsi/device_handler/scsi_dh_rdac.c
index fdf34b0ec6e1..2dee69da35cf 100644
--- a/drivers/scsi/device_handler/scsi_dh_rdac.c
+++ b/drivers/scsi/device_handler/scsi_dh_rdac.c
@@ -173,6 +173,11 @@ struct rdac_dh_data {
 #define RDAC_STATE_ACTIVE	0
 #define RDAC_STATE_PASSIVE	1
 	unsigned char		state;
+
+#define RDAC_LUN_UNOWNED	0
+#define RDAC_LUN_OWNED		1
+#define RDAC_LUN_AVT		2
+	char			lun_state;
 	unsigned char		sense[SCSI_SENSE_BUFFERSIZE];
 	union			{
 		struct c2_inquiry c2;
@@ -182,6 +187,13 @@ struct rdac_dh_data {
 	} inq;
 };
 
+static const char *lun_state[] =
+{
+	"unowned",
+	"owned",
+	"owned (AVT mode)",
+};
+
 static LIST_HEAD(ctlr_list);
 static DEFINE_SPINLOCK(list_lock);
 
@@ -197,9 +209,8 @@ static struct request *get_rdac_req(struct scsi_device *sdev,
 {
 	struct request *rq;
 	struct request_queue *q = sdev->request_queue;
-	struct rdac_dh_data *h = get_rdac_data(sdev);
 
-	rq = blk_get_request(q, rw, GFP_KERNEL);
+	rq = blk_get_request(q, rw, GFP_NOIO);
 
 	if (!rq) {
 		sdev_printk(KERN_INFO, sdev,
@@ -207,17 +218,14 @@ static struct request *get_rdac_req(struct scsi_device *sdev,
 		return NULL;
 	}
 
-	if (buflen && blk_rq_map_kern(q, rq, buffer, buflen, GFP_KERNEL)) {
+	if (buflen && blk_rq_map_kern(q, rq, buffer, buflen, GFP_NOIO)) {
 		blk_put_request(rq);
 		sdev_printk(KERN_INFO, sdev,
 				"get_rdac_req: blk_rq_map_kern failed.\n");
 		return NULL;
 	}
 
-	memset(&rq->cmd, 0, BLK_MAX_CDB);
-	rq->sense = h->sense;
-	memset(rq->sense, 0, SCSI_SENSE_BUFFERSIZE);
-	rq->sense_len = 0;
+	memset(rq->cmd, 0, BLK_MAX_CDB);
 
 	rq->cmd_type = REQ_TYPE_BLOCK_PC;
 	rq->cmd_flags |= REQ_FAILFAST | REQ_NOMERGE;
@@ -227,12 +235,12 @@ static struct request *get_rdac_req(struct scsi_device *sdev,
 	return rq;
 }
 
-static struct request *rdac_failover_get(struct scsi_device *sdev)
+static struct request *rdac_failover_get(struct scsi_device *sdev,
+					 struct rdac_dh_data *h)
 {
 	struct request *rq;
 	struct rdac_mode_common *common;
 	unsigned data_size;
-	struct rdac_dh_data *h = get_rdac_data(sdev);
 
 	if (h->ctlr->use_ms10) {
 		struct rdac_pg_expanded *rdac_pg;
@@ -277,6 +285,10 @@ static struct request *rdac_failover_get(struct scsi_device *sdev)
 	}
 	rq->cmd_len = COMMAND_SIZE(rq->cmd[0]);
 
+	rq->sense = h->sense;
+	memset(rq->sense, 0, SCSI_SENSE_BUFFERSIZE);
+	rq->sense_len = 0;
+
 	return rq;
 }
 
@@ -321,11 +333,10 @@ done:
 }
 
 static int submit_inquiry(struct scsi_device *sdev, int page_code,
-		unsigned int len)
+			  unsigned int len, struct rdac_dh_data *h)
 {
 	struct request *rq;
 	struct request_queue *q = sdev->request_queue;
-	struct rdac_dh_data *h = get_rdac_data(sdev);
 	int err = SCSI_DH_RES_TEMP_UNAVAIL;
 
 	rq = get_rdac_req(sdev, &h->inq, len, READ);
@@ -338,59 +349,69 @@ static int submit_inquiry(struct scsi_device *sdev, int page_code,
 	rq->cmd[2] = page_code;
 	rq->cmd[4] = len;
 	rq->cmd_len = COMMAND_SIZE(INQUIRY);
+
+	rq->sense = h->sense;
+	memset(rq->sense, 0, SCSI_SENSE_BUFFERSIZE);
+	rq->sense_len = 0;
+
 	err = blk_execute_rq(q, NULL, rq, 1);
 	if (err == -EIO)
 		err = SCSI_DH_IO;
+
+	blk_put_request(rq);
 done:
 	return err;
 }
 
-static int get_lun(struct scsi_device *sdev)
+static int get_lun(struct scsi_device *sdev, struct rdac_dh_data *h)
 {
 	int err;
 	struct c8_inquiry *inqp;
-	struct rdac_dh_data *h = get_rdac_data(sdev);
 
-	err = submit_inquiry(sdev, 0xC8, sizeof(struct c8_inquiry));
+	err = submit_inquiry(sdev, 0xC8, sizeof(struct c8_inquiry), h);
 	if (err == SCSI_DH_OK) {
 		inqp = &h->inq.c8;
-		h->lun = inqp->lun[7]; /* currently it uses only one byte */
+		if (inqp->page_code != 0xc8)
+			return SCSI_DH_NOSYS;
+		if (inqp->page_id[0] != 'e' || inqp->page_id[1] != 'd' ||
+		    inqp->page_id[2] != 'i' || inqp->page_id[3] != 'd')
+			return SCSI_DH_NOSYS;
+		h->lun = inqp->lun[7]; /* Uses only the last byte */
 	}
 	return err;
 }
 
-#define RDAC_OWNED	0
-#define RDAC_UNOWNED	1
-#define RDAC_FAILED	2
-static int check_ownership(struct scsi_device *sdev)
+static int check_ownership(struct scsi_device *sdev, struct rdac_dh_data *h)
 {
 	int err;
 	struct c9_inquiry *inqp;
-	struct rdac_dh_data *h = get_rdac_data(sdev);
 
-	err = submit_inquiry(sdev, 0xC9, sizeof(struct c9_inquiry));
+	h->lun_state = RDAC_LUN_UNOWNED;
+	err = submit_inquiry(sdev, 0xC9, sizeof(struct c9_inquiry), h);
 	if (err == SCSI_DH_OK) {
-		err = RDAC_UNOWNED;
 		inqp = &h->inq.c9;
-		/*
-		 * If in AVT mode or if the path already owns the LUN,
-		 * return RDAC_OWNED;
-		 */
-		if (((inqp->avte_cvp >> 7) == 0x1) ||
-				 ((inqp->avte_cvp & 0x1) != 0))
-			err = RDAC_OWNED;
-	} else
-		err = RDAC_FAILED;
+		if ((inqp->avte_cvp >> 7) == 0x1) {
+			/* LUN in AVT mode */
+			sdev_printk(KERN_NOTICE, sdev,
+				    "%s: AVT mode detected\n",
+				    RDAC_NAME);
+			h->lun_state = RDAC_LUN_AVT;
+		} else if ((inqp->avte_cvp & 0x1) != 0) {
+			/* LUN was owned by the controller */
+			h->lun_state = RDAC_LUN_OWNED;
+		}
+	}
+
 	return err;
 }
 
-static int initialize_controller(struct scsi_device *sdev)
+static int initialize_controller(struct scsi_device *sdev,
+				 struct rdac_dh_data *h)
 {
 	int err;
 	struct c4_inquiry *inqp;
-	struct rdac_dh_data *h = get_rdac_data(sdev);
 
-	err = submit_inquiry(sdev, 0xC4, sizeof(struct c4_inquiry));
+	err = submit_inquiry(sdev, 0xC4, sizeof(struct c4_inquiry), h);
 	if (err == SCSI_DH_OK) {
 		inqp = &h->inq.c4;
 		h->ctlr = get_controller(inqp->subsys_id, inqp->slot_id);
@@ -400,13 +421,12 @@ static int initialize_controller(struct scsi_device *sdev)
 	return err;
 }
 
-static int set_mode_select(struct scsi_device *sdev)
+static int set_mode_select(struct scsi_device *sdev, struct rdac_dh_data *h)
 {
 	int err;
 	struct c2_inquiry *inqp;
-	struct rdac_dh_data *h = get_rdac_data(sdev);
 
-	err = submit_inquiry(sdev, 0xC2, sizeof(struct c2_inquiry));
+	err = submit_inquiry(sdev, 0xC2, sizeof(struct c2_inquiry), h);
 	if (err == SCSI_DH_OK) {
 		inqp = &h->inq.c2;
 		/*
@@ -421,13 +441,13 @@ static int set_mode_select(struct scsi_device *sdev)
 	return err;
 }
 
-static int mode_select_handle_sense(struct scsi_device *sdev)
+static int mode_select_handle_sense(struct scsi_device *sdev,
+				    unsigned char *sensebuf)
 {
 	struct scsi_sense_hdr sense_hdr;
-	struct rdac_dh_data *h = get_rdac_data(sdev);
 	int sense, err = SCSI_DH_IO, ret;
 
-	ret = scsi_normalize_sense(h->sense, SCSI_SENSE_BUFFERSIZE, &sense_hdr);
+	ret = scsi_normalize_sense(sensebuf, SCSI_SENSE_BUFFERSIZE, &sense_hdr);
 	if (!ret)
 		goto done;
 
@@ -451,14 +471,13 @@ done:
 	return err;
 }
 
-static int send_mode_select(struct scsi_device *sdev)
+static int send_mode_select(struct scsi_device *sdev, struct rdac_dh_data *h)
 {
 	struct request *rq;
 	struct request_queue *q = sdev->request_queue;
-	struct rdac_dh_data *h = get_rdac_data(sdev);
 	int err = SCSI_DH_RES_TEMP_UNAVAIL;
 
-	rq = rdac_failover_get(sdev);
+	rq = rdac_failover_get(sdev, h);
 	if (!rq)
 		goto done;
 
@@ -466,9 +485,11 @@ static int send_mode_select(struct scsi_device *sdev)
 
 	err = blk_execute_rq(q, NULL, rq, 1);
 	if (err != SCSI_DH_OK)
-		err = mode_select_handle_sense(sdev);
+		err = mode_select_handle_sense(sdev, h->sense);
 	if (err == SCSI_DH_OK)
 		h->state = RDAC_STATE_ACTIVE;
+
+	blk_put_request(rq);
 done:
 	return err;
 }
@@ -478,38 +499,23 @@ static int rdac_activate(struct scsi_device *sdev)
 	struct rdac_dh_data *h = get_rdac_data(sdev);
 	int err = SCSI_DH_OK;
 
-	if (h->lun == UNINITIALIZED_LUN) {
-		err = get_lun(sdev);
-		if (err != SCSI_DH_OK)
-			goto done;
-	}
-
-	err = check_ownership(sdev);
-	switch (err) {
-	case RDAC_UNOWNED:
-		break;
-	case RDAC_OWNED:
-		err = SCSI_DH_OK;
-		goto done;
-	case RDAC_FAILED:
-	default:
-		err = SCSI_DH_IO;
+	err = check_ownership(sdev, h);
+	if (err != SCSI_DH_OK)
 		goto done;
-	}
 
 	if (!h->ctlr) {
-		err = initialize_controller(sdev);
+		err = initialize_controller(sdev, h);
 		if (err != SCSI_DH_OK)
 			goto done;
 	}
 
 	if (h->ctlr->use_ms10 == -1) {
-		err = set_mode_select(sdev);
+		err = set_mode_select(sdev, h);
 		if (err != SCSI_DH_OK)
 			goto done;
 	}
-
-	err = send_mode_select(sdev);
+	if (h->lun_state == RDAC_LUN_UNOWNED)
+		err = send_mode_select(sdev, h);
 done:
 	return err;
 }
@@ -569,10 +575,7 @@ static int rdac_check_sense(struct scsi_device *sdev,
 	return SCSI_RETURN_NOT_HANDLED;
 }
 
-static const struct {
-	char *vendor;
-	char *model;
-} rdac_dev_list[] = {
+static const struct scsi_dh_devlist rdac_dev_list[] = {
 	{"IBM", "1722"},
 	{"IBM", "1724"},
 	{"IBM", "1726"},
@@ -590,89 +593,89 @@ static const struct {
 	{NULL, NULL},
 };
 
-static int rdac_bus_notify(struct notifier_block *, unsigned long, void *);
+static int rdac_bus_attach(struct scsi_device *sdev);
+static void rdac_bus_detach(struct scsi_device *sdev);
 
 static struct scsi_device_handler rdac_dh = {
 	.name = RDAC_NAME,
 	.module = THIS_MODULE,
-	.nb.notifier_call = rdac_bus_notify,
+	.devlist = rdac_dev_list,
 	.prep_fn = rdac_prep_fn,
 	.check_sense = rdac_check_sense,
+	.attach = rdac_bus_attach,
+	.detach = rdac_bus_detach,
 	.activate = rdac_activate,
 };
 
-/*
- * TODO: need some interface so we can set trespass values
- */
-static int rdac_bus_notify(struct notifier_block *nb,
-			    unsigned long action, void *data)
+static int rdac_bus_attach(struct scsi_device *sdev)
 {
-	struct device *dev = data;
-	struct scsi_device *sdev;
 	struct scsi_dh_data *scsi_dh_data;
 	struct rdac_dh_data *h;
-	int i, found = 0;
 	unsigned long flags;
+	int err;
 
-	if (!scsi_is_sdev_device(dev))
+	scsi_dh_data = kzalloc(sizeof(struct scsi_device_handler *)
+			       + sizeof(*h) , GFP_KERNEL);
+	if (!scsi_dh_data) {
+		sdev_printk(KERN_ERR, sdev, "%s: Attach failed\n",
+			    RDAC_NAME);
 		return 0;
+	}
 
-	sdev = to_scsi_device(dev);
-
-	if (action == BUS_NOTIFY_ADD_DEVICE) {
-		for (i = 0; rdac_dev_list[i].vendor; i++) {
-			if (!strncmp(sdev->vendor, rdac_dev_list[i].vendor,
-				     strlen(rdac_dev_list[i].vendor)) &&
-			    !strncmp(sdev->model, rdac_dev_list[i].model,
-				     strlen(rdac_dev_list[i].model))) {
-				found = 1;
-				break;
-			}
-		}
-		if (!found)
-			goto out;
+	scsi_dh_data->scsi_dh = &rdac_dh;
+	h = (struct rdac_dh_data *) scsi_dh_data->buf;
+	h->lun = UNINITIALIZED_LUN;
+	h->state = RDAC_STATE_ACTIVE;
 
-		scsi_dh_data = kzalloc(sizeof(struct scsi_device_handler *)
-				+ sizeof(*h) , GFP_KERNEL);
-		if (!scsi_dh_data) {
-			sdev_printk(KERN_ERR, sdev, "Attach failed %s.\n",
-				    RDAC_NAME);
-			goto out;
-		}
+	err = get_lun(sdev, h);
+	if (err != SCSI_DH_OK)
+		goto failed;
 
-		scsi_dh_data->scsi_dh = &rdac_dh;
-		h = (struct rdac_dh_data *) scsi_dh_data->buf;
-		h->lun = UNINITIALIZED_LUN;
-		h->state = RDAC_STATE_ACTIVE;
-		spin_lock_irqsave(sdev->request_queue->queue_lock, flags);
-		sdev->scsi_dh_data = scsi_dh_data;
-		spin_unlock_irqrestore(sdev->request_queue->queue_lock, flags);
-		try_module_get(THIS_MODULE);
-
-		sdev_printk(KERN_NOTICE, sdev, "Attached %s.\n", RDAC_NAME);
-
-	} else if (action == BUS_NOTIFY_DEL_DEVICE) {
-		if (sdev->scsi_dh_data == NULL ||
-				sdev->scsi_dh_data->scsi_dh != &rdac_dh)
-			goto out;
-
-		spin_lock_irqsave(sdev->request_queue->queue_lock, flags);
-		scsi_dh_data = sdev->scsi_dh_data;
-		sdev->scsi_dh_data = NULL;
-		spin_unlock_irqrestore(sdev->request_queue->queue_lock, flags);
-
-		h = (struct rdac_dh_data *) scsi_dh_data->buf;
-		if (h->ctlr)
-			kref_put(&h->ctlr->kref, release_controller);
-		kfree(scsi_dh_data);
-		module_put(THIS_MODULE);
-		sdev_printk(KERN_NOTICE, sdev, "Dettached %s.\n", RDAC_NAME);
-	}
+	err = check_ownership(sdev, h);
+	if (err != SCSI_DH_OK)
+		goto failed;
+
+	if (!try_module_get(THIS_MODULE))
+		goto failed;
+
+	spin_lock_irqsave(sdev->request_queue->queue_lock, flags);
+	sdev->scsi_dh_data = scsi_dh_data;
+	spin_unlock_irqrestore(sdev->request_queue->queue_lock, flags);
+
+	sdev_printk(KERN_NOTICE, sdev,
+		    "%s: LUN %d (%s)\n",
+		    RDAC_NAME, h->lun, lun_state[(int)h->lun_state]);
 
-out:
 	return 0;
+
+failed:
+	kfree(scsi_dh_data);
+	sdev_printk(KERN_ERR, sdev, "%s: not attached\n",
+		    RDAC_NAME);
+	return -EINVAL;
+}
+
+static void rdac_bus_detach( struct scsi_device *sdev )
+{
+	struct scsi_dh_data *scsi_dh_data;
+	struct rdac_dh_data *h;
+	unsigned long flags;
+
+	spin_lock_irqsave(sdev->request_queue->queue_lock, flags);
+	scsi_dh_data = sdev->scsi_dh_data;
+	sdev->scsi_dh_data = NULL;
+	spin_unlock_irqrestore(sdev->request_queue->queue_lock, flags);
+
+	h = (struct rdac_dh_data *) scsi_dh_data->buf;
+	if (h->ctlr)
+		kref_put(&h->ctlr->kref, release_controller);
+	kfree(scsi_dh_data);
+	module_put(THIS_MODULE);
+	sdev_printk(KERN_NOTICE, sdev, "%s: Detached\n", RDAC_NAME);
 }
 
+
+
 static int __init rdac_init(void)
 {
 	int r;
diff --git a/drivers/scsi/dpt/dpti_i2o.h b/drivers/scsi/dpt/dpti_i2o.h
index 19406cea6d6a..179ad77f6cc9 100644
--- a/drivers/scsi/dpt/dpti_i2o.h
+++ b/drivers/scsi/dpt/dpti_i2o.h
@@ -21,7 +21,6 @@
 
 #include <linux/i2o-dev.h>
 
-#include <linux/version.h>
 #include <linux/notifier.h>
 #include <asm/atomic.h>
 
diff --git a/drivers/scsi/hptiop.c b/drivers/scsi/hptiop.c
index da876d3924be..a48e4990fe12 100644
--- a/drivers/scsi/hptiop.c
+++ b/drivers/scsi/hptiop.c
@@ -25,7 +25,6 @@
 #include <linux/delay.h>
 #include <linux/timer.h>
 #include <linux/spinlock.h>
-#include <linux/hdreg.h>
 #include <asm/uaccess.h>
 #include <asm/io.h>
 #include <asm/div64.h>
@@ -1249,6 +1248,13 @@ static struct pci_device_id hptiop_id_table[] = {
 	{ PCI_VDEVICE(TTI, 0x3522), (kernel_ulong_t)&hptiop_itl_ops },
 	{ PCI_VDEVICE(TTI, 0x3410), (kernel_ulong_t)&hptiop_itl_ops },
 	{ PCI_VDEVICE(TTI, 0x3540), (kernel_ulong_t)&hptiop_itl_ops },
+	{ PCI_VDEVICE(TTI, 0x3530), (kernel_ulong_t)&hptiop_itl_ops },
+	{ PCI_VDEVICE(TTI, 0x3560), (kernel_ulong_t)&hptiop_itl_ops },
+	{ PCI_VDEVICE(TTI, 0x4322), (kernel_ulong_t)&hptiop_itl_ops },
+	{ PCI_VDEVICE(TTI, 0x4210), (kernel_ulong_t)&hptiop_itl_ops },
+	{ PCI_VDEVICE(TTI, 0x4211), (kernel_ulong_t)&hptiop_itl_ops },
+	{ PCI_VDEVICE(TTI, 0x4310), (kernel_ulong_t)&hptiop_itl_ops },
+	{ PCI_VDEVICE(TTI, 0x4311), (kernel_ulong_t)&hptiop_itl_ops },
 	{ PCI_VDEVICE(TTI, 0x3120), (kernel_ulong_t)&hptiop_mv_ops },
 	{ PCI_VDEVICE(TTI, 0x3122), (kernel_ulong_t)&hptiop_mv_ops },
 	{ PCI_VDEVICE(TTI, 0x3020), (kernel_ulong_t)&hptiop_mv_ops },
diff --git a/drivers/scsi/ibmvscsi/ibmvfc.c b/drivers/scsi/ibmvscsi/ibmvfc.c
index eb702b96d57c..4e0b7c8eb32e 100644
--- a/drivers/scsi/ibmvscsi/ibmvfc.c
+++ b/drivers/scsi/ibmvscsi/ibmvfc.c
@@ -521,9 +521,10 @@ static void ibmvfc_set_host_action(struct ibmvfc_host *vhost,
 static void ibmvfc_reinit_host(struct ibmvfc_host *vhost)
 {
 	if (vhost->action == IBMVFC_HOST_ACTION_NONE) {
-		scsi_block_requests(vhost->host);
-		ibmvfc_set_host_state(vhost, IBMVFC_INITIALIZING);
-		ibmvfc_set_host_action(vhost, IBMVFC_HOST_ACTION_QUERY);
+		if (!ibmvfc_set_host_state(vhost, IBMVFC_INITIALIZING)) {
+			scsi_block_requests(vhost->host);
+			ibmvfc_set_host_action(vhost, IBMVFC_HOST_ACTION_QUERY);
+		}
 	} else
 		vhost->reinit = 1;
 
@@ -555,11 +556,12 @@ static void ibmvfc_link_down(struct ibmvfc_host *vhost,
 /**
  * ibmvfc_init_host - Start host initialization
  * @vhost:		ibmvfc host struct
+ * @relogin:	is this a re-login?
  *
  * Return value:
  *	nothing
  **/
-static void ibmvfc_init_host(struct ibmvfc_host *vhost)
+static void ibmvfc_init_host(struct ibmvfc_host *vhost, int relogin)
 {
 	struct ibmvfc_target *tgt;
 
@@ -573,6 +575,11 @@ static void ibmvfc_init_host(struct ibmvfc_host *vhost)
 	}
 
 	if (!ibmvfc_set_host_state(vhost, IBMVFC_INITIALIZING)) {
+		if (!relogin) {
+			memset(vhost->async_crq.msgs, 0, PAGE_SIZE);
+			vhost->async_crq.cur = 0;
+		}
+
 		list_for_each_entry(tgt, &vhost->targets, queue)
 			tgt->need_login = 1;
 		scsi_block_requests(vhost->host);
@@ -854,39 +861,41 @@ static void ibmvfc_retry_host_init(struct ibmvfc_host *vhost)
 }
 
 /**
- * __ibmvfc_find_target - Find the specified scsi_target (no locking)
+ * __ibmvfc_get_target - Find the specified scsi_target (no locking)
  * @starget:	scsi target struct
  *
  * Return value:
  *	ibmvfc_target struct / NULL if not found
  **/
-static struct ibmvfc_target *__ibmvfc_find_target(struct scsi_target *starget)
+static struct ibmvfc_target *__ibmvfc_get_target(struct scsi_target *starget)
 {
 	struct Scsi_Host *shost = dev_to_shost(starget->dev.parent);
 	struct ibmvfc_host *vhost = shost_priv(shost);
 	struct ibmvfc_target *tgt;
 
 	list_for_each_entry(tgt, &vhost->targets, queue)
-		if (tgt->target_id == starget->id)
+		if (tgt->target_id == starget->id) {
+			kref_get(&tgt->kref);
 			return tgt;
+		}
 	return NULL;
 }
 
 /**
- * ibmvfc_find_target - Find the specified scsi_target
+ * ibmvfc_get_target - Find the specified scsi_target
  * @starget:	scsi target struct
  *
  * Return value:
  *	ibmvfc_target struct / NULL if not found
  **/
-static struct ibmvfc_target *ibmvfc_find_target(struct scsi_target *starget)
+static struct ibmvfc_target *ibmvfc_get_target(struct scsi_target *starget)
 {
 	struct Scsi_Host *shost = dev_to_shost(starget->dev.parent);
 	struct ibmvfc_target *tgt;
 	unsigned long flags;
 
 	spin_lock_irqsave(shost->host_lock, flags);
-	tgt = __ibmvfc_find_target(starget);
+	tgt = __ibmvfc_get_target(starget);
 	spin_unlock_irqrestore(shost->host_lock, flags);
 	return tgt;
 }
@@ -963,6 +972,9 @@ static void ibmvfc_get_host_port_state(struct Scsi_Host *shost)
 	case IBMVFC_HALTED:
 		fc_host_port_state(shost) = FC_PORTSTATE_BLOCKED;
 		break;
+	case IBMVFC_NO_CRQ:
+		fc_host_port_state(shost) = FC_PORTSTATE_UNKNOWN;
+		break;
 	default:
 		ibmvfc_log(vhost, 3, "Unknown port state: %d\n", vhost->state);
 		fc_host_port_state(shost) = FC_PORTSTATE_UNKNOWN;
@@ -988,6 +1000,17 @@ static void ibmvfc_set_rport_dev_loss_tmo(struct fc_rport *rport, u32 timeout)
 }
 
 /**
+ * ibmvfc_release_tgt - Free memory allocated for a target
+ * @kref:		kref struct
+ *
+ **/
+static void ibmvfc_release_tgt(struct kref *kref)
+{
+	struct ibmvfc_target *tgt = container_of(kref, struct ibmvfc_target, kref);
+	kfree(tgt);
+}
+
+/**
  * ibmvfc_get_starget_node_name - Get SCSI target's node name
  * @starget:	scsi target struct
  *
@@ -996,8 +1019,10 @@ static void ibmvfc_set_rport_dev_loss_tmo(struct fc_rport *rport, u32 timeout)
  **/
 static void ibmvfc_get_starget_node_name(struct scsi_target *starget)
 {
-	struct ibmvfc_target *tgt = ibmvfc_find_target(starget);
+	struct ibmvfc_target *tgt = ibmvfc_get_target(starget);
 	fc_starget_port_name(starget) = tgt ? tgt->ids.node_name : 0;
+	if (tgt)
+		kref_put(&tgt->kref, ibmvfc_release_tgt);
 }
 
 /**
@@ -1009,8 +1034,10 @@ static void ibmvfc_get_starget_node_name(struct scsi_target *starget)
  **/
 static void ibmvfc_get_starget_port_name(struct scsi_target *starget)
 {
-	struct ibmvfc_target *tgt = ibmvfc_find_target(starget);
+	struct ibmvfc_target *tgt = ibmvfc_get_target(starget);
 	fc_starget_port_name(starget) = tgt ? tgt->ids.port_name : 0;
+	if (tgt)
+		kref_put(&tgt->kref, ibmvfc_release_tgt);
 }
 
 /**
@@ -1022,8 +1049,10 @@ static void ibmvfc_get_starget_port_name(struct scsi_target *starget)
  **/
 static void ibmvfc_get_starget_port_id(struct scsi_target *starget)
 {
-	struct ibmvfc_target *tgt = ibmvfc_find_target(starget);
+	struct ibmvfc_target *tgt = ibmvfc_get_target(starget);
 	fc_starget_port_id(starget) = tgt ? tgt->scsi_id : -1;
+	if (tgt)
+		kref_put(&tgt->kref, ibmvfc_release_tgt);
 }
 
 /**
@@ -1036,9 +1065,10 @@ static void ibmvfc_get_starget_port_id(struct scsi_target *starget)
 static int ibmvfc_wait_while_resetting(struct ibmvfc_host *vhost)
 {
 	long timeout = wait_event_timeout(vhost->init_wait_q,
-					  (vhost->state == IBMVFC_ACTIVE ||
-					   vhost->state == IBMVFC_HOST_OFFLINE ||
-					   vhost->state == IBMVFC_LINK_DEAD),
+					  ((vhost->state == IBMVFC_ACTIVE ||
+					    vhost->state == IBMVFC_HOST_OFFLINE ||
+					    vhost->state == IBMVFC_LINK_DEAD) &&
+					   vhost->action == IBMVFC_HOST_ACTION_NONE),
 					  (init_timeout * HZ));
 
 	return timeout ? 0 : -EIO;
@@ -1113,7 +1143,7 @@ static void ibmvfc_set_login_info(struct ibmvfc_host *vhost)
 	login_info->max_cmds = max_requests + IBMVFC_NUM_INTERNAL_REQ;
 	login_info->capabilities = IBMVFC_CAN_MIGRATE;
 	login_info->async.va = vhost->async_crq.msg_token;
-	login_info->async.len = vhost->async_crq.size;
+	login_info->async.len = vhost->async_crq.size * sizeof(*vhost->async_crq.msgs);
 	strncpy(login_info->partition_name, vhost->partition_name, IBMVFC_MAX_NAME);
 	strncpy(login_info->device_name,
 		vhost->host->shost_gendev.bus_id, IBMVFC_MAX_NAME);
@@ -1404,7 +1434,7 @@ static void ibmvfc_log_error(struct ibmvfc_event *evt)
 		err = cmd_status[index].name;
 	}
 
-	if (!logerr && (vhost->log_level <= IBMVFC_DEFAULT_LOG_LEVEL))
+	if (!logerr && (vhost->log_level <= (IBMVFC_DEFAULT_LOG_LEVEL + 1)))
 		return;
 
 	if (rsp->flags & FCP_RSP_LEN_VALID)
@@ -1427,8 +1457,8 @@ static void ibmvfc_scsi_done(struct ibmvfc_event *evt)
 	struct ibmvfc_cmd *vfc_cmd = &evt->xfer_iu->cmd;
 	struct ibmvfc_fcp_rsp *rsp = &vfc_cmd->rsp;
 	struct scsi_cmnd *cmnd = evt->cmnd;
-	int rsp_len = 0;
-	int sense_len = rsp->fcp_sense_len;
+	u32 rsp_len = 0;
+	u32 sense_len = rsp->fcp_sense_len;
 
 	if (cmnd) {
 		if (vfc_cmd->response_flags & IBMVFC_ADAPTER_RESID_VALID)
@@ -1445,7 +1475,7 @@ static void ibmvfc_scsi_done(struct ibmvfc_event *evt)
 				rsp_len = rsp->fcp_rsp_len;
 			if ((sense_len + rsp_len) > SCSI_SENSE_BUFFERSIZE)
 				sense_len = SCSI_SENSE_BUFFERSIZE - rsp_len;
-			if ((rsp->flags & FCP_SNS_LEN_VALID) && rsp->fcp_sense_len)
+			if ((rsp->flags & FCP_SNS_LEN_VALID) && rsp->fcp_sense_len && rsp_len <= 8)
 				memcpy(cmnd->sense_buffer, rsp->data.sense + rsp_len, sense_len);
 
 			ibmvfc_log_error(evt);
@@ -2054,17 +2084,18 @@ static void ibmvfc_handle_async(struct ibmvfc_async_crq *crq,
 {
 	const char *desc = ibmvfc_get_ae_desc(crq->event);
 
-	ibmvfc_log(vhost, 2, "%s event received\n", desc);
+	ibmvfc_log(vhost, 3, "%s event received. scsi_id: %lx, wwpn: %lx,"
+		   " node_name: %lx\n", desc, crq->scsi_id, crq->wwpn, crq->node_name);
 
 	switch (crq->event) {
 	case IBMVFC_AE_LINK_UP:
 	case IBMVFC_AE_RESUME:
 		vhost->events_to_log |= IBMVFC_AE_LINKUP;
-		ibmvfc_init_host(vhost);
+		ibmvfc_init_host(vhost, 1);
 		break;
 	case IBMVFC_AE_SCN_FABRIC:
 		vhost->events_to_log |= IBMVFC_AE_RSCN;
-		ibmvfc_init_host(vhost);
+		ibmvfc_init_host(vhost, 1);
 		break;
 	case IBMVFC_AE_SCN_NPORT:
 	case IBMVFC_AE_SCN_GROUP:
@@ -2110,13 +2141,13 @@ static void ibmvfc_handle_crq(struct ibmvfc_crq *crq, struct ibmvfc_host *vhost)
 			/* Send back a response */
 			rc = ibmvfc_send_crq_init_complete(vhost);
 			if (rc == 0)
-				ibmvfc_init_host(vhost);
+				ibmvfc_init_host(vhost, 0);
 			else
 				dev_err(vhost->dev, "Unable to send init rsp. rc=%ld\n", rc);
 			break;
 		case IBMVFC_CRQ_INIT_COMPLETE:
 			dev_info(vhost->dev, "Partner initialization complete\n");
-			ibmvfc_init_host(vhost);
+			ibmvfc_init_host(vhost, 0);
 			break;
 		default:
 			dev_err(vhost->dev, "Unknown crq message type: %d\n", crq->format);
@@ -2648,17 +2679,6 @@ static void ibmvfc_retry_tgt_init(struct ibmvfc_target *tgt,
 }
 
 /**
- * ibmvfc_release_tgt - Free memory allocated for a target
- * @kref:		kref struct
- *
- **/
-static void ibmvfc_release_tgt(struct kref *kref)
-{
-	struct ibmvfc_target *tgt = container_of(kref, struct ibmvfc_target, kref);
-	kfree(tgt);
-}
-
-/**
  * ibmvfc_tgt_prli_done - Completion handler for Process Login
  * @evt:	ibmvfc event struct
  *
@@ -2902,6 +2922,139 @@ static void ibmvfc_tgt_implicit_logout(struct ibmvfc_target *tgt)
 }
 
 /**
+ * ibmvfc_adisc_needs_plogi - Does device need PLOGI?
+ * @mad:	ibmvfc passthru mad struct
+ * @tgt:	ibmvfc target struct
+ *
+ * Returns:
+ *	1 if PLOGI needed / 0 if PLOGI not needed
+ **/
+static int ibmvfc_adisc_needs_plogi(struct ibmvfc_passthru_mad *mad,
+				    struct ibmvfc_target *tgt)
+{
+	if (memcmp(&mad->fc_iu.response[2], &tgt->ids.port_name,
+		   sizeof(tgt->ids.port_name)))
+		return 1;
+	if (memcmp(&mad->fc_iu.response[4], &tgt->ids.node_name,
+		   sizeof(tgt->ids.node_name)))
+		return 1;
+	if (mad->fc_iu.response[6] != tgt->scsi_id)
+		return 1;
+	return 0;
+}
+
+/**
+ * ibmvfc_tgt_adisc_done - Completion handler for ADISC
+ * @evt:	ibmvfc event struct
+ *
+ **/
+static void ibmvfc_tgt_adisc_done(struct ibmvfc_event *evt)
+{
+	struct ibmvfc_target *tgt = evt->tgt;
+	struct ibmvfc_host *vhost = evt->vhost;
+	struct ibmvfc_passthru_mad *mad = &evt->xfer_iu->passthru;
+	u32 status = mad->common.status;
+	u8 fc_reason, fc_explain;
+
+	vhost->discovery_threads--;
+	ibmvfc_set_tgt_action(tgt, IBMVFC_TGT_ACTION_NONE);
+
+	switch (status) {
+	case IBMVFC_MAD_SUCCESS:
+		tgt_dbg(tgt, "ADISC succeeded\n");
+		if (ibmvfc_adisc_needs_plogi(mad, tgt))
+			tgt->need_login = 1;
+		break;
+	case IBMVFC_MAD_DRIVER_FAILED:
+		break;
+	case IBMVFC_MAD_FAILED:
+	default:
+		tgt->need_login = 1;
+		fc_reason = (mad->fc_iu.response[1] & 0x00ff0000) >> 16;
+		fc_explain = (mad->fc_iu.response[1] & 0x0000ff00) >> 8;
+		tgt_info(tgt, "ADISC failed: %s (%x:%x) %s (%x) %s (%x) rc=0x%02X\n",
+			 ibmvfc_get_cmd_error(mad->iu.status, mad->iu.error),
+			 mad->iu.status, mad->iu.error,
+			 ibmvfc_get_fc_type(fc_reason), fc_reason,
+			 ibmvfc_get_ls_explain(fc_explain), fc_explain, status);
+		break;
+	};
+
+	kref_put(&tgt->kref, ibmvfc_release_tgt);
+	ibmvfc_free_event(evt);
+	wake_up(&vhost->work_wait_q);
+}
+
+/**
+ * ibmvfc_init_passthru - Initialize an event struct for FC passthru
+ * @evt:		ibmvfc event struct
+ *
+ **/
+static void ibmvfc_init_passthru(struct ibmvfc_event *evt)
+{
+	struct ibmvfc_passthru_mad *mad = &evt->iu.passthru;
+
+	memset(mad, 0, sizeof(*mad));
+	mad->common.version = 1;
+	mad->common.opcode = IBMVFC_PASSTHRU;
+	mad->common.length = sizeof(*mad) - sizeof(mad->fc_iu) - sizeof(mad->iu);
+	mad->cmd_ioba.va = (u64)evt->crq.ioba +
+		offsetof(struct ibmvfc_passthru_mad, iu);
+	mad->cmd_ioba.len = sizeof(mad->iu);
+	mad->iu.cmd_len = sizeof(mad->fc_iu.payload);
+	mad->iu.rsp_len = sizeof(mad->fc_iu.response);
+	mad->iu.cmd.va = (u64)evt->crq.ioba +
+		offsetof(struct ibmvfc_passthru_mad, fc_iu) +
+		offsetof(struct ibmvfc_passthru_fc_iu, payload);
+	mad->iu.cmd.len = sizeof(mad->fc_iu.payload);
+	mad->iu.rsp.va = (u64)evt->crq.ioba +
+		offsetof(struct ibmvfc_passthru_mad, fc_iu) +
+		offsetof(struct ibmvfc_passthru_fc_iu, response);
+	mad->iu.rsp.len = sizeof(mad->fc_iu.response);
+}
+
+/**
+ * ibmvfc_tgt_adisc - Initiate an ADISC for specified target
+ * @tgt:		ibmvfc target struct
+ *
+ **/
+static void ibmvfc_tgt_adisc(struct ibmvfc_target *tgt)
+{
+	struct ibmvfc_passthru_mad *mad;
+	struct ibmvfc_host *vhost = tgt->vhost;
+	struct ibmvfc_event *evt;
+
+	if (vhost->discovery_threads >= disc_threads)
+		return;
+
+	kref_get(&tgt->kref);
+	evt = ibmvfc_get_event(vhost);
+	vhost->discovery_threads++;
+	ibmvfc_init_event(evt, ibmvfc_tgt_adisc_done, IBMVFC_MAD_FORMAT);
+	evt->tgt = tgt;
+
+	ibmvfc_init_passthru(evt);
+	mad = &evt->iu.passthru;
+	mad->iu.flags = IBMVFC_FC_ELS;
+	mad->iu.scsi_id = tgt->scsi_id;
+
+	mad->fc_iu.payload[0] = IBMVFC_ADISC;
+	memcpy(&mad->fc_iu.payload[2], &vhost->login_buf->resp.port_name,
+	       sizeof(vhost->login_buf->resp.port_name));
+	memcpy(&mad->fc_iu.payload[4], &vhost->login_buf->resp.node_name,
+	       sizeof(vhost->login_buf->resp.node_name));
+	mad->fc_iu.payload[6] = vhost->login_buf->resp.scsi_id & 0x00ffffff;
+
+	ibmvfc_set_tgt_action(tgt, IBMVFC_TGT_ACTION_INIT_WAIT);
+	if (ibmvfc_send_event(evt, vhost, default_timeout)) {
+		vhost->discovery_threads--;
+		ibmvfc_set_tgt_action(tgt, IBMVFC_TGT_ACTION_NONE);
+		kref_put(&tgt->kref, ibmvfc_release_tgt);
+	} else
+		tgt_dbg(tgt, "Sent ADISC\n");
+}
+
+/**
  * ibmvfc_tgt_query_target_done - Completion handler for Query Target MAD
  * @evt:	ibmvfc event struct
  *
@@ -2921,6 +3074,8 @@ static void ibmvfc_tgt_query_target_done(struct ibmvfc_event *evt)
 		tgt->new_scsi_id = rsp->scsi_id;
 		if (rsp->scsi_id != tgt->scsi_id)
 			ibmvfc_init_tgt(tgt, ibmvfc_tgt_implicit_logout);
+		else
+			ibmvfc_init_tgt(tgt, ibmvfc_tgt_adisc);
 		break;
 	case IBMVFC_MAD_DRIVER_FAILED:
 		break;
@@ -3210,8 +3365,6 @@ static void ibmvfc_npiv_login(struct ibmvfc_host *vhost)
 	mad->buffer.va = vhost->login_buf_dma;
 	mad->buffer.len = sizeof(*vhost->login_buf);
 
-	memset(vhost->async_crq.msgs, 0, PAGE_SIZE);
-	vhost->async_crq.cur = 0;
 	ibmvfc_set_host_action(vhost, IBMVFC_HOST_ACTION_INIT_WAIT);
 
 	if (!ibmvfc_send_event(evt, vhost, default_timeout))
@@ -3336,6 +3489,7 @@ static void ibmvfc_tgt_add_rport(struct ibmvfc_target *tgt)
 		tgt_dbg(tgt, "rport add succeeded\n");
 		rport->maxframe_size = tgt->service_parms.common.bb_rcv_sz & 0x0fff;
 		rport->supported_classes = 0;
+		tgt->target_id = rport->scsi_target_id;
 		if (tgt->service_parms.class1_parms[0] & 0x80000000)
 			rport->supported_classes |= FC_COS_CLASS1;
 		if (tgt->service_parms.class2_parms[0] & 0x80000000)
@@ -3453,8 +3607,9 @@ static void ibmvfc_do_work(struct ibmvfc_host *vhost)
 			}
 		}
 
-		if (vhost->reinit) {
+		if (vhost->reinit && !ibmvfc_set_host_state(vhost, IBMVFC_INITIALIZING)) {
 			vhost->reinit = 0;
+			scsi_block_requests(vhost->host);
 			ibmvfc_set_host_action(vhost, IBMVFC_HOST_ACTION_QUERY);
 		} else {
 			ibmvfc_set_host_action(vhost, IBMVFC_HOST_ACTION_NONE);
@@ -3525,7 +3680,7 @@ static int ibmvfc_init_crq(struct ibmvfc_host *vhost)
 	crq->msg_token = dma_map_single(dev, crq->msgs,
 					PAGE_SIZE, DMA_BIDIRECTIONAL);
 
-	if (dma_mapping_error(crq->msg_token))
+	if (dma_mapping_error(dev, crq->msg_token))
 		goto map_failed;
 
 	retrc = rc = plpar_hcall_norets(H_REG_CRQ, vdev->unit_address,
@@ -3618,7 +3773,7 @@ static int ibmvfc_alloc_mem(struct ibmvfc_host *vhost)
 					    async_q->size * sizeof(*async_q->msgs),
 					    DMA_BIDIRECTIONAL);
 
-	if (dma_mapping_error(async_q->msg_token)) {
+	if (dma_mapping_error(dev, async_q->msg_token)) {
 		dev_err(dev, "Failed to map async queue\n");
 		goto free_async_crq;
 	}
@@ -3800,10 +3955,12 @@ static int ibmvfc_remove(struct vio_dev *vdev)
 
 	ENTER;
 	ibmvfc_remove_trace_file(&vhost->host->shost_dev.kobj, &ibmvfc_trace_attr);
+	ibmvfc_link_down(vhost, IBMVFC_HOST_OFFLINE);
+	ibmvfc_wait_while_resetting(vhost);
+	ibmvfc_release_crq_queue(vhost);
 	kthread_stop(vhost->work_thread);
 	fc_remove_host(vhost->host);
 	scsi_remove_host(vhost->host);
-	ibmvfc_release_crq_queue(vhost);
 
 	spin_lock_irqsave(vhost->host->host_lock, flags);
 	ibmvfc_purge_requests(vhost, DID_ERROR);
@@ -3819,6 +3976,20 @@ static int ibmvfc_remove(struct vio_dev *vdev)
 	return 0;
 }
 
+/**
+ * ibmvfc_get_desired_dma - Calculate DMA resources needed by the driver
+ * @vdev:	vio device struct
+ *
+ * Return value:
+ *	Number of bytes the driver will need to DMA map at the same time in
+ *	order to perform well.
+ */
+static unsigned long ibmvfc_get_desired_dma(struct vio_dev *vdev)
+{
+	unsigned long pool_dma = max_requests * sizeof(union ibmvfc_iu);
+	return pool_dma + ((512 * 1024) * driver_template.cmd_per_lun);
+}
+
 static struct vio_device_id ibmvfc_device_table[] __devinitdata = {
 	{"fcp", "IBM,vfc-client"},
 	{ "", "" }
@@ -3829,6 +4000,7 @@ static struct vio_driver ibmvfc_driver = {
 	.id_table = ibmvfc_device_table,
 	.probe = ibmvfc_probe,
 	.remove = ibmvfc_remove,
+	.get_desired_dma = ibmvfc_get_desired_dma,
 	.driver = {
 		.name = IBMVFC_NAME,
 		.owner = THIS_MODULE,
diff --git a/drivers/scsi/ibmvscsi/ibmvfc.h b/drivers/scsi/ibmvscsi/ibmvfc.h
index 057f3c01ed61..fb3177ab6691 100644
--- a/drivers/scsi/ibmvscsi/ibmvfc.h
+++ b/drivers/scsi/ibmvscsi/ibmvfc.h
@@ -29,8 +29,8 @@
 #include "viosrp.h"
 
 #define IBMVFC_NAME	"ibmvfc"
-#define IBMVFC_DRIVER_VERSION		"1.0.0"
-#define IBMVFC_DRIVER_DATE		"(July 1, 2008)"
+#define IBMVFC_DRIVER_VERSION		"1.0.2"
+#define IBMVFC_DRIVER_DATE		"(August 14, 2008)"
 
 #define IBMVFC_DEFAULT_TIMEOUT	15
 #define IBMVFC_INIT_TIMEOUT		30
@@ -119,6 +119,7 @@ enum ibmvfc_mad_types {
 	IBMVFC_PROCESS_LOGIN	= 0x0008,
 	IBMVFC_QUERY_TARGET	= 0x0010,
 	IBMVFC_IMPLICIT_LOGOUT	= 0x0040,
+	IBMVFC_PASSTHRU		= 0x0200,
 	IBMVFC_TMF_MAD		= 0x0100,
 };
 
@@ -439,6 +440,37 @@ struct ibmvfc_cmd {
 	struct ibmvfc_fcp_rsp rsp;
 }__attribute__((packed, aligned (8)));
 
+struct ibmvfc_passthru_fc_iu {
+	u32 payload[7];
+#define IBMVFC_ADISC	0x52000000
+	u32 response[7];
+};
+
+struct ibmvfc_passthru_iu {
+	u64 task_tag;
+	u32 cmd_len;
+	u32 rsp_len;
+	u16 status;
+	u16 error;
+	u32 flags;
+#define IBMVFC_FC_ELS		0x01
+	u32 cancel_key;
+	u32 reserved;
+	struct srp_direct_buf cmd;
+	struct srp_direct_buf rsp;
+	u64 correlation;
+	u64 scsi_id;
+	u64 tag;
+	u64 reserved2[2];
+}__attribute__((packed, aligned (8)));
+
+struct ibmvfc_passthru_mad {
+	struct ibmvfc_mad_common common;
+	struct srp_direct_buf cmd_ioba;
+	struct ibmvfc_passthru_iu iu;
+	struct ibmvfc_passthru_fc_iu fc_iu;
+}__attribute__((packed, aligned (8)));
+
 struct ibmvfc_trace_start_entry {
 	u32 xfer_len;
 }__attribute__((packed));
@@ -531,6 +563,7 @@ union ibmvfc_iu {
 	struct ibmvfc_implicit_logout implicit_logout;
 	struct ibmvfc_tmf tmf;
 	struct ibmvfc_cmd cmd;
+	struct ibmvfc_passthru_mad passthru;
 }__attribute__((packed, aligned (8)));
 
 enum ibmvfc_target_action {
@@ -656,6 +689,9 @@ struct ibmvfc_host {
 #define tgt_dbg(t, fmt, ...)			\
 	DBG_CMD(dev_info((t)->vhost->dev, "%lX: " fmt, (t)->scsi_id, ##__VA_ARGS__))
 
+#define tgt_info(t, fmt, ...)		\
+	dev_info((t)->vhost->dev, "%lX: " fmt, (t)->scsi_id, ##__VA_ARGS__)
+
 #define tgt_err(t, fmt, ...)		\
 	dev_err((t)->vhost->dev, "%lX: " fmt, (t)->scsi_id, ##__VA_ARGS__)
 
@@ -668,8 +704,8 @@ struct ibmvfc_host {
 			dev_err((vhost)->dev, ##__VA_ARGS__); \
 	} while (0)
 
-#define ENTER DBG_CMD(printk(KERN_INFO IBMVFC_NAME": Entering %s\n", __FUNCTION__))
-#define LEAVE DBG_CMD(printk(KERN_INFO IBMVFC_NAME": Leaving %s\n", __FUNCTION__))
+#define ENTER DBG_CMD(printk(KERN_INFO IBMVFC_NAME": Entering %s\n", __func__))
+#define LEAVE DBG_CMD(printk(KERN_INFO IBMVFC_NAME": Leaving %s\n", __func__))
 
 #ifdef CONFIG_SCSI_IBMVFC_TRACE
 #define ibmvfc_create_trace_file(kobj, attr) sysfs_create_bin_file(kobj, attr)
diff --git a/drivers/scsi/ibmvscsi/ibmvscsi.c b/drivers/scsi/ibmvscsi/ibmvscsi.c
index 5d23368a1bce..7b1502c0ab6e 100644
--- a/drivers/scsi/ibmvscsi/ibmvscsi.c
+++ b/drivers/scsi/ibmvscsi/ibmvscsi.c
@@ -72,6 +72,7 @@
 #include <linux/delay.h>
 #include <asm/firmware.h>
 #include <asm/vio.h>
+#include <asm/firmware.h>
 #include <scsi/scsi.h>
 #include <scsi/scsi_cmnd.h>
 #include <scsi/scsi_host.h>
@@ -426,8 +427,10 @@ static int map_sg_data(struct scsi_cmnd *cmd,
 					   SG_ALL * sizeof(struct srp_direct_buf),
 					   &evt_struct->ext_list_token, 0);
 		if (!evt_struct->ext_list) {
-			sdev_printk(KERN_ERR, cmd->device,
-				    "Can't allocate memory for indirect table\n");
+			if (!firmware_has_feature(FW_FEATURE_CMO))
+				sdev_printk(KERN_ERR, cmd->device,
+				            "Can't allocate memory "
+				            "for indirect table\n");
 			return 0;
 		}
 	}
@@ -743,7 +746,9 @@ static int ibmvscsi_queuecommand(struct scsi_cmnd *cmnd,
 	srp_cmd->lun = ((u64) lun) << 48;
 
 	if (!map_data_for_srp_cmd(cmnd, evt_struct, srp_cmd, hostdata->dev)) {
-		sdev_printk(KERN_ERR, cmnd->device, "couldn't convert cmd to srp_cmd\n");
+		if (!firmware_has_feature(FW_FEATURE_CMO))
+			sdev_printk(KERN_ERR, cmnd->device,
+			            "couldn't convert cmd to srp_cmd\n");
 		free_event_struct(&hostdata->pool, evt_struct);
 		return SCSI_MLQUEUE_HOST_BUSY;
 	}
@@ -854,8 +859,11 @@ static void send_mad_adapter_info(struct ibmvscsi_host_data *hostdata)
 					    sizeof(hostdata->madapter_info),
 					    DMA_BIDIRECTIONAL);
 
-	if (dma_mapping_error(req->buffer)) {
-		dev_err(hostdata->dev, "Unable to map request_buffer for adapter_info!\n");
+	if (dma_mapping_error(hostdata->dev, req->buffer)) {
+		if (!firmware_has_feature(FW_FEATURE_CMO))
+			dev_err(hostdata->dev,
+			        "Unable to map request_buffer for "
+			        "adapter_info!\n");
 		free_event_struct(&hostdata->pool, evt_struct);
 		return;
 	}
@@ -1399,8 +1407,10 @@ static int ibmvscsi_do_host_config(struct ibmvscsi_host_data *hostdata,
 						    length,
 						    DMA_BIDIRECTIONAL);
 
-	if (dma_mapping_error(host_config->buffer)) {
-		dev_err(hostdata->dev, "dma_mapping error getting host config\n");
+	if (dma_mapping_error(hostdata->dev, host_config->buffer)) {
+		if (!firmware_has_feature(FW_FEATURE_CMO))
+			dev_err(hostdata->dev,
+			        "dma_mapping error getting host config\n");
 		free_event_struct(&hostdata->pool, evt_struct);
 		return -1;
 	}
@@ -1604,7 +1614,7 @@ static struct scsi_host_template driver_template = {
 	.eh_host_reset_handler = ibmvscsi_eh_host_reset_handler,
 	.slave_configure = ibmvscsi_slave_configure,
 	.change_queue_depth = ibmvscsi_change_queue_depth,
-	.cmd_per_lun = 16,
+	.cmd_per_lun = IBMVSCSI_CMDS_PER_LUN_DEFAULT,
 	.can_queue = IBMVSCSI_MAX_REQUESTS_DEFAULT,
 	.this_id = -1,
 	.sg_tablesize = SG_ALL,
@@ -1613,6 +1623,26 @@ static struct scsi_host_template driver_template = {
 };
 
 /**
+ * ibmvscsi_get_desired_dma - Calculate IO memory desired by the driver
+ *
+ * @vdev: struct vio_dev for the device whose desired IO mem is to be returned
+ *
+ * Return value:
+ *	Number of bytes of IO data the driver will need to perform well.
+ */
+static unsigned long ibmvscsi_get_desired_dma(struct vio_dev *vdev)
+{
+	/* iu_storage data allocated in initialize_event_pool */
+	unsigned long desired_io = max_requests * sizeof(union viosrp_iu);
+
+	/* add io space for sg data */
+	desired_io += (IBMVSCSI_MAX_SECTORS_DEFAULT * 512 *
+	                     IBMVSCSI_CMDS_PER_LUN_DEFAULT);
+
+	return desired_io;
+}
+
+/**
  * Called by bus code for each adapter
  */
 static int ibmvscsi_probe(struct vio_dev *vdev, const struct vio_device_id *id)
@@ -1641,7 +1671,7 @@ static int ibmvscsi_probe(struct vio_dev *vdev, const struct vio_device_id *id)
 	hostdata->host = host;
 	hostdata->dev = dev;
 	atomic_set(&hostdata->request_limit, -1);
-	hostdata->host->max_sectors = 32 * 8; /* default max I/O 32 pages */
+	hostdata->host->max_sectors = IBMVSCSI_MAX_SECTORS_DEFAULT;
 
 	rc = ibmvscsi_ops->init_crq_queue(&hostdata->queue, hostdata, max_requests);
 	if (rc != 0 && rc != H_RESOURCE) {
@@ -1735,6 +1765,7 @@ static struct vio_driver ibmvscsi_driver = {
 	.id_table = ibmvscsi_device_table,
 	.probe = ibmvscsi_probe,
 	.remove = ibmvscsi_remove,
+	.get_desired_dma = ibmvscsi_get_desired_dma,
 	.driver = {
 		.name = "ibmvscsi",
 		.owner = THIS_MODULE,
diff --git a/drivers/scsi/ibmvscsi/ibmvscsi.h b/drivers/scsi/ibmvscsi/ibmvscsi.h
index 46e850e302c7..2d4339d5e16e 100644
--- a/drivers/scsi/ibmvscsi/ibmvscsi.h
+++ b/drivers/scsi/ibmvscsi/ibmvscsi.h
@@ -45,6 +45,8 @@ struct Scsi_Host;
 #define MAX_INDIRECT_BUFS 10
 
 #define IBMVSCSI_MAX_REQUESTS_DEFAULT 100
+#define IBMVSCSI_CMDS_PER_LUN_DEFAULT 16
+#define IBMVSCSI_MAX_SECTORS_DEFAULT 256 /* 32 * 8 = default max I/O 32 pages */
 #define IBMVSCSI_MAX_CMDS_PER_LUN 64
 
 /* ------------------------------------------------------------
diff --git a/drivers/scsi/ibmvscsi/ibmvstgt.c b/drivers/scsi/ibmvscsi/ibmvstgt.c
index 3b9514c8f1f1..2a5b29d12172 100644
--- a/drivers/scsi/ibmvscsi/ibmvstgt.c
+++ b/drivers/scsi/ibmvscsi/ibmvstgt.c
@@ -55,7 +55,7 @@
 /* tmp - will replace with SCSI logging stuff */
 #define eprintk(fmt, args...)					\
 do {								\
-	printk("%s(%d) " fmt, __FUNCTION__, __LINE__, ##args);	\
+	printk("%s(%d) " fmt, __func__, __LINE__, ##args);	\
 } while (0)
 /* #define dprintk eprintk */
 #define dprintk(fmt, args...)
@@ -564,7 +564,7 @@ static int crq_queue_create(struct crq_queue *queue, struct srp_target *target)
 					  queue->size * sizeof(*queue->msgs),
 					  DMA_BIDIRECTIONAL);
 
-	if (dma_mapping_error(queue->msg_token))
+	if (dma_mapping_error(target->dev, queue->msg_token))
 		goto map_failed;
 
 	err = h_reg_crq(vport->dma_dev->unit_address, queue->msg_token,
diff --git a/drivers/scsi/ibmvscsi/rpa_vscsi.c b/drivers/scsi/ibmvscsi/rpa_vscsi.c
index 182146100dc1..462a8574dad9 100644
--- a/drivers/scsi/ibmvscsi/rpa_vscsi.c
+++ b/drivers/scsi/ibmvscsi/rpa_vscsi.c
@@ -253,7 +253,7 @@ static int rpavscsi_init_crq_queue(struct crq_queue *queue,
 					  queue->size * sizeof(*queue->msgs),
 					  DMA_BIDIRECTIONAL);
 
-	if (dma_mapping_error(queue->msg_token))
+	if (dma_mapping_error(hostdata->dev, queue->msg_token))
 		goto map_failed;
 
 	gather_partition_info();
diff --git a/drivers/scsi/ide-scsi.c b/drivers/scsi/ide-scsi.c
index b40a673985aa..461331d3dc45 100644
--- a/drivers/scsi/ide-scsi.c
+++ b/drivers/scsi/ide-scsi.c
@@ -102,11 +102,10 @@ static struct ide_scsi_obj *ide_scsi_get(struct gendisk *disk)
 	mutex_lock(&idescsi_ref_mutex);
 	scsi = ide_scsi_g(disk);
 	if (scsi) {
-		scsi_host_get(scsi->host);
-		if (ide_device_get(scsi->drive)) {
-			scsi_host_put(scsi->host);
+		if (ide_device_get(scsi->drive))
 			scsi = NULL;
-		}
+		else
+			scsi_host_get(scsi->host);
 	}
 	mutex_unlock(&idescsi_ref_mutex);
 	return scsi;
@@ -114,9 +113,11 @@ static struct ide_scsi_obj *ide_scsi_get(struct gendisk *disk)
 
 static void ide_scsi_put(struct ide_scsi_obj *scsi)
 {
+	ide_drive_t *drive = scsi->drive;
+
 	mutex_lock(&idescsi_ref_mutex);
-	ide_device_put(scsi->drive);
 	scsi_host_put(scsi->host);
+	ide_device_put(drive);
 	mutex_unlock(&idescsi_ref_mutex);
 }
 
diff --git a/drivers/scsi/imm.c b/drivers/scsi/imm.c
index f97d172844be..c2a9a13d788f 100644
--- a/drivers/scsi/imm.c
+++ b/drivers/scsi/imm.c
@@ -163,7 +163,7 @@ static int imm_proc_info(struct Scsi_Host *host, char *buffer, char **start,
 
 #if IMM_DEBUG > 0
 #define imm_fail(x,y) printk("imm: imm_fail(%i) from %s at line %d\n",\
-	   y, __FUNCTION__, __LINE__); imm_fail_func(x,y);
+	   y, __func__, __LINE__); imm_fail_func(x,y);
 static inline void
 imm_fail_func(imm_struct *dev, int error_code)
 #else
diff --git a/drivers/scsi/ipr.h b/drivers/scsi/ipr.h
index d93156671e93..4871dd1f2582 100644
--- a/drivers/scsi/ipr.h
+++ b/drivers/scsi/ipr.h
@@ -1403,10 +1403,10 @@ struct ipr_ucode_image_header {
 }
 
 #define ipr_trace ipr_dbg("%s: %s: Line: %d\n",\
-	__FILE__, __FUNCTION__, __LINE__)
+	__FILE__, __func__, __LINE__)
 
-#define ENTER IPR_DBG_CMD(printk(KERN_INFO IPR_NAME": Entering %s\n", __FUNCTION__))
-#define LEAVE IPR_DBG_CMD(printk(KERN_INFO IPR_NAME": Leaving %s\n", __FUNCTION__))
+#define ENTER IPR_DBG_CMD(printk(KERN_INFO IPR_NAME": Entering %s\n", __func__))
+#define LEAVE IPR_DBG_CMD(printk(KERN_INFO IPR_NAME": Leaving %s\n", __func__))
 
 #define ipr_err_separator \
 ipr_err("----------------------------------------------------------\n")
diff --git a/drivers/scsi/ips.c b/drivers/scsi/ips.c
index 7c615c70ec5c..bc9e6ddf41df 100644
--- a/drivers/scsi/ips.c
+++ b/drivers/scsi/ips.c
@@ -165,7 +165,6 @@
 #include <asm/byteorder.h>
 #include <asm/page.h>
 #include <linux/stddef.h>
-#include <linux/version.h>
 #include <linux/string.h>
 #include <linux/errno.h>
 #include <linux/kernel.h>
diff --git a/drivers/scsi/ips.h b/drivers/scsi/ips.h
index e0657b6f009c..4e49fbcfe8af 100644
--- a/drivers/scsi/ips.h
+++ b/drivers/scsi/ips.h
@@ -50,7 +50,6 @@
 #ifndef _IPS_H_
    #define _IPS_H_
 
-#include <linux/version.h>
 #include <linux/nmi.h>
    #include <asm/uaccess.h>
    #include <asm/io.h>
diff --git a/drivers/scsi/libsas/sas_ata.c b/drivers/scsi/libsas/sas_ata.c
index 744f06d04a36..48ee8c7f5bdd 100644
--- a/drivers/scsi/libsas/sas_ata.c
+++ b/drivers/scsi/libsas/sas_ata.c
@@ -74,7 +74,7 @@ static enum ata_completion_errors sas_to_ata_err(struct task_status_struct *ts)
 		case SAS_OPEN_TO:
 		case SAS_OPEN_REJECT:
 			SAS_DPRINTK("%s: Saw error %d.  What to do?\n",
-				    __FUNCTION__, ts->stat);
+				    __func__, ts->stat);
 			return AC_ERR_OTHER;
 
 		case SAS_ABORTED_TASK:
@@ -115,7 +115,7 @@ static void sas_ata_task_done(struct sas_task *task)
 	} else if (stat->stat != SAM_STAT_GOOD) {
 		ac = sas_to_ata_err(stat);
 		if (ac) {
-			SAS_DPRINTK("%s: SAS error %x\n", __FUNCTION__,
+			SAS_DPRINTK("%s: SAS error %x\n", __func__,
 				    stat->stat);
 			/* We saw a SAS error. Send a vague error. */
 			qc->err_mask = ac;
@@ -244,20 +244,20 @@ static void sas_ata_phy_reset(struct ata_port *ap)
 		res = i->dft->lldd_I_T_nexus_reset(dev);
 
 	if (res != TMF_RESP_FUNC_COMPLETE)
-		SAS_DPRINTK("%s: Unable to reset I T nexus?\n", __FUNCTION__);
+		SAS_DPRINTK("%s: Unable to reset I T nexus?\n", __func__);
 
 	switch (dev->sata_dev.command_set) {
 		case ATA_COMMAND_SET:
-			SAS_DPRINTK("%s: Found ATA device.\n", __FUNCTION__);
+			SAS_DPRINTK("%s: Found ATA device.\n", __func__);
 			ap->link.device[0].class = ATA_DEV_ATA;
 			break;
 		case ATAPI_COMMAND_SET:
-			SAS_DPRINTK("%s: Found ATAPI device.\n", __FUNCTION__);
+			SAS_DPRINTK("%s: Found ATAPI device.\n", __func__);
 			ap->link.device[0].class = ATA_DEV_ATAPI;
 			break;
 		default:
 			SAS_DPRINTK("%s: Unknown SATA command set: %d.\n",
-				    __FUNCTION__,
+				    __func__,
 				    dev->sata_dev.command_set);
 			ap->link.device[0].class = ATA_DEV_UNKNOWN;
 			break;
@@ -299,7 +299,7 @@ static int sas_ata_scr_write(struct ata_port *ap, unsigned int sc_reg_in,
 {
 	struct domain_device *dev = ap->private_data;
 
-	SAS_DPRINTK("STUB %s\n", __FUNCTION__);
+	SAS_DPRINTK("STUB %s\n", __func__);
 	switch (sc_reg_in) {
 		case SCR_STATUS:
 			dev->sata_dev.sstatus = val;
@@ -324,7 +324,7 @@ static int sas_ata_scr_read(struct ata_port *ap, unsigned int sc_reg_in,
 {
 	struct domain_device *dev = ap->private_data;
 
-	SAS_DPRINTK("STUB %s\n", __FUNCTION__);
+	SAS_DPRINTK("STUB %s\n", __func__);
 	switch (sc_reg_in) {
 		case SCR_STATUS:
 			*val = dev->sata_dev.sstatus;
diff --git a/drivers/scsi/libsas/sas_expander.c b/drivers/scsi/libsas/sas_expander.c
index aefd865a5788..3da02e436788 100644
--- a/drivers/scsi/libsas/sas_expander.c
+++ b/drivers/scsi/libsas/sas_expander.c
@@ -121,7 +121,7 @@ static int smp_execute_task(struct domain_device *dev, void *req, int req_size,
 			break;
 		} else {
 			SAS_DPRINTK("%s: task to dev %016llx response: 0x%x "
-				    "status 0x%x\n", __FUNCTION__,
+				    "status 0x%x\n", __func__,
 				    SAS_ADDR(dev->sas_addr),
 				    task->task_status.resp,
 				    task->task_status.stat);
@@ -1279,7 +1279,7 @@ static int sas_configure_present(struct domain_device *dev, int phy_id,
 			goto out;
 		} else if (res != SMP_RESP_FUNC_ACC) {
 			SAS_DPRINTK("%s: dev %016llx phy 0x%x index 0x%x "
-				    "result 0x%x\n", __FUNCTION__,
+				    "result 0x%x\n", __func__,
 				    SAS_ADDR(dev->sas_addr), phy_id, i, res);
 			goto out;
 		}
@@ -1901,7 +1901,7 @@ int sas_smp_handler(struct Scsi_Host *shost, struct sas_rphy *rphy,
 
 	if (!rsp) {
 		printk("%s: space for a smp response is missing\n",
-		       __FUNCTION__);
+		       __func__);
 		return -EINVAL;
 	}
 
@@ -1914,20 +1914,20 @@ int sas_smp_handler(struct Scsi_Host *shost, struct sas_rphy *rphy,
 	if (type != SAS_EDGE_EXPANDER_DEVICE &&
 	    type != SAS_FANOUT_EXPANDER_DEVICE) {
 		printk("%s: can we send a smp request to a device?\n",
-		       __FUNCTION__);
+		       __func__);
 		return -EINVAL;
 	}
 
 	dev = sas_find_dev_by_rphy(rphy);
 	if (!dev) {
-		printk("%s: fail to find a domain_device?\n", __FUNCTION__);
+		printk("%s: fail to find a domain_device?\n", __func__);
 		return -EINVAL;
 	}
 
 	/* do we need to support multiple segments? */
 	if (req->bio->bi_vcnt > 1 || rsp->bio->bi_vcnt > 1) {
 		printk("%s: multiple segments req %u %u, rsp %u %u\n",
-		       __FUNCTION__, req->bio->bi_vcnt, req->data_len,
+		       __func__, req->bio->bi_vcnt, req->data_len,
 		       rsp->bio->bi_vcnt, rsp->data_len);
 		return -EINVAL;
 	}
diff --git a/drivers/scsi/libsas/sas_port.c b/drivers/scsi/libsas/sas_port.c
index 39ae68a3b0ef..139935a121b4 100644
--- a/drivers/scsi/libsas/sas_port.c
+++ b/drivers/scsi/libsas/sas_port.c
@@ -50,7 +50,7 @@ static void sas_form_port(struct asd_sas_phy *phy)
 			sas_deform_port(phy);
 		else {
 			SAS_DPRINTK("%s: phy%d belongs to port%d already(%d)!\n",
-				    __FUNCTION__, phy->id, phy->port->id,
+				    __func__, phy->id, phy->port->id,
 				    phy->port->num_phys);
 			return;
 		}
@@ -78,7 +78,7 @@ static void sas_form_port(struct asd_sas_phy *phy)
 
 	if (i >= sas_ha->num_phys) {
 		printk(KERN_NOTICE "%s: couldn't find a free port, bug?\n",
-		       __FUNCTION__);
+		       __func__);
 		spin_unlock_irqrestore(&sas_ha->phy_port_lock, flags);
 		return;
 	}
diff --git a/drivers/scsi/libsas/sas_scsi_host.c b/drivers/scsi/libsas/sas_scsi_host.c
index 601ec5b6a7f6..a8e3ef309070 100644
--- a/drivers/scsi/libsas/sas_scsi_host.c
+++ b/drivers/scsi/libsas/sas_scsi_host.c
@@ -343,7 +343,7 @@ static enum task_disposition sas_scsi_find_task(struct sas_task *task)
 						       flags);
 				SAS_DPRINTK("%s: task 0x%p aborted from "
 					    "task_queue\n",
-					    __FUNCTION__, task);
+					    __func__, task);
 				return TASK_IS_ABORTED;
 			}
 		}
@@ -351,13 +351,13 @@ static enum task_disposition sas_scsi_find_task(struct sas_task *task)
 	}
 
 	for (i = 0; i < 5; i++) {
-		SAS_DPRINTK("%s: aborting task 0x%p\n", __FUNCTION__, task);
+		SAS_DPRINTK("%s: aborting task 0x%p\n", __func__, task);
 		res = si->dft->lldd_abort_task(task);
 
 		spin_lock_irqsave(&task->task_state_lock, flags);
 		if (task->task_state_flags & SAS_TASK_STATE_DONE) {
 			spin_unlock_irqrestore(&task->task_state_lock, flags);
-			SAS_DPRINTK("%s: task 0x%p is done\n", __FUNCTION__,
+			SAS_DPRINTK("%s: task 0x%p is done\n", __func__,
 				    task);
 			return TASK_IS_DONE;
 		}
@@ -365,24 +365,24 @@ static enum task_disposition sas_scsi_find_task(struct sas_task *task)
 
 		if (res == TMF_RESP_FUNC_COMPLETE) {
 			SAS_DPRINTK("%s: task 0x%p is aborted\n",
-				    __FUNCTION__, task);
+				    __func__, task);
 			return TASK_IS_ABORTED;
 		} else if (si->dft->lldd_query_task) {
 			SAS_DPRINTK("%s: querying task 0x%p\n",
-				    __FUNCTION__, task);
+				    __func__, task);
 			res = si->dft->lldd_query_task(task);
 			switch (res) {
 			case TMF_RESP_FUNC_SUCC:
 				SAS_DPRINTK("%s: task 0x%p at LU\n",
-					    __FUNCTION__, task);
+					    __func__, task);
 				return TASK_IS_AT_LU;
 			case TMF_RESP_FUNC_COMPLETE:
 				SAS_DPRINTK("%s: task 0x%p not at LU\n",
-					    __FUNCTION__, task);
+					    __func__, task);
 				return TASK_IS_NOT_AT_LU;
 			case TMF_RESP_FUNC_FAILED:
                                 SAS_DPRINTK("%s: task 0x%p failed to abort\n",
-                                                __FUNCTION__, task);
+                                                __func__, task);
                                 return TASK_ABORT_FAILED;
                         }
 
@@ -545,7 +545,7 @@ Again:
 
 		if (need_reset) {
 			SAS_DPRINTK("%s: task 0x%p requests reset\n",
-				    __FUNCTION__, task);
+				    __func__, task);
 			goto reset;
 		}
 
@@ -556,13 +556,13 @@ Again:
 
 		switch (res) {
 		case TASK_IS_DONE:
-			SAS_DPRINTK("%s: task 0x%p is done\n", __FUNCTION__,
+			SAS_DPRINTK("%s: task 0x%p is done\n", __func__,
 				    task);
 			sas_eh_finish_cmd(cmd);
 			continue;
 		case TASK_IS_ABORTED:
 			SAS_DPRINTK("%s: task 0x%p is aborted\n",
-				    __FUNCTION__, task);
+				    __func__, task);
 			sas_eh_finish_cmd(cmd);
 			continue;
 		case TASK_IS_AT_LU:
@@ -633,7 +633,7 @@ Again:
 	}
 	return list_empty(work_q);
 clear_q:
-	SAS_DPRINTK("--- Exit %s -- clear_q\n", __FUNCTION__);
+	SAS_DPRINTK("--- Exit %s -- clear_q\n", __func__);
 	list_for_each_entry_safe(cmd, n, work_q, eh_entry)
 		sas_eh_finish_cmd(cmd);
 
@@ -650,7 +650,7 @@ void sas_scsi_recover_host(struct Scsi_Host *shost)
 	list_splice_init(&shost->eh_cmd_q, &eh_work_q);
 	spin_unlock_irqrestore(shost->host_lock, flags);
 
-	SAS_DPRINTK("Enter %s\n", __FUNCTION__);
+	SAS_DPRINTK("Enter %s\n", __func__);
 	/*
 	 * Deal with commands that still have SAS tasks (i.e. they didn't
 	 * complete via the normal sas_task completion mechanism)
@@ -669,7 +669,7 @@ void sas_scsi_recover_host(struct Scsi_Host *shost)
 
 out:
 	scsi_eh_flush_done_q(&ha->eh_done_q);
-	SAS_DPRINTK("--- Exit %s\n", __FUNCTION__);
+	SAS_DPRINTK("--- Exit %s\n", __func__);
 	return;
 }
 
@@ -990,7 +990,7 @@ int __sas_task_abort(struct sas_task *task)
 	if (task->task_state_flags & SAS_TASK_STATE_ABORTED ||
 	    task->task_state_flags & SAS_TASK_STATE_DONE) {
 		spin_unlock_irqrestore(&task->task_state_lock, flags);
-		SAS_DPRINTK("%s: Task %p already finished.\n", __FUNCTION__,
+		SAS_DPRINTK("%s: Task %p already finished.\n", __func__,
 			    task);
 		return 0;
 	}
diff --git a/drivers/scsi/libsrp.c b/drivers/scsi/libsrp.c
index 6d6a76e65a6c..15e2d132e8b9 100644
--- a/drivers/scsi/libsrp.c
+++ b/drivers/scsi/libsrp.c
@@ -39,7 +39,7 @@ enum srp_task_attributes {
 /* tmp - will replace with SCSI logging stuff */
 #define eprintk(fmt, args...)					\
 do {								\
-	printk("%s(%d) " fmt, __FUNCTION__, __LINE__, ##args);	\
+	printk("%s(%d) " fmt, __func__, __LINE__, ##args);	\
 } while (0)
 /* #define dprintk eprintk */
 #define dprintk(fmt, args...)
diff --git a/drivers/scsi/lpfc/lpfc_debugfs.c b/drivers/scsi/lpfc/lpfc_debugfs.c
index 90272e65957a..094b47e94b29 100644
--- a/drivers/scsi/lpfc/lpfc_debugfs.c
+++ b/drivers/scsi/lpfc/lpfc_debugfs.c
@@ -27,7 +27,6 @@
 #include <linux/pci.h>
 #include <linux/spinlock.h>
 #include <linux/ctype.h>
-#include <linux/version.h>
 
 #include <scsi/scsi.h>
 #include <scsi/scsi_device.h>
diff --git a/drivers/scsi/lpfc/lpfc_init.c b/drivers/scsi/lpfc/lpfc_init.c
index 5b6e5395c8eb..d51a2a4b43eb 100644
--- a/drivers/scsi/lpfc/lpfc_init.c
+++ b/drivers/scsi/lpfc/lpfc_init.c
@@ -2083,7 +2083,7 @@ lpfc_pci_probe_one(struct pci_dev *pdev, const struct pci_device_id *pid)
 		if (iocbq_entry == NULL) {
 			printk(KERN_ERR "%s: only allocated %d iocbs of "
 				"expected %d count. Unloading driver.\n",
-				__FUNCTION__, i, LPFC_IOCB_LIST_CNT);
+				__func__, i, LPFC_IOCB_LIST_CNT);
 			error = -ENOMEM;
 			goto out_free_iocbq;
 		}
@@ -2093,7 +2093,7 @@ lpfc_pci_probe_one(struct pci_dev *pdev, const struct pci_device_id *pid)
 			kfree (iocbq_entry);
 			printk(KERN_ERR "%s: failed to allocate IOTAG. "
 			       "Unloading driver.\n",
-				__FUNCTION__);
+				__func__);
 			error = -ENOMEM;
 			goto out_free_iocbq;
 		}
diff --git a/drivers/scsi/lpfc/lpfc_scsi.c b/drivers/scsi/lpfc/lpfc_scsi.c
index c94da4f2b8a6..1bcebbd3dfac 100644
--- a/drivers/scsi/lpfc/lpfc_scsi.c
+++ b/drivers/scsi/lpfc/lpfc_scsi.c
@@ -341,7 +341,7 @@ lpfc_scsi_prep_dma_buf(struct lpfc_hba *phba, struct lpfc_scsi_buf *lpfc_cmd)
 		if (lpfc_cmd->seg_cnt > phba->cfg_sg_seg_cnt) {
 			printk(KERN_ERR "%s: Too many sg segments from "
 			       "dma_map_sg.  Config %d, seg_cnt %d",
-			       __FUNCTION__, phba->cfg_sg_seg_cnt,
+			       __func__, phba->cfg_sg_seg_cnt,
 			       lpfc_cmd->seg_cnt);
 			scsi_dma_unmap(scsi_cmnd);
 			return 1;
diff --git a/drivers/scsi/lpfc/lpfc_sli.c b/drivers/scsi/lpfc/lpfc_sli.c
index f40aa7b905f7..50fe07646738 100644
--- a/drivers/scsi/lpfc/lpfc_sli.c
+++ b/drivers/scsi/lpfc/lpfc_sli.c
@@ -219,7 +219,7 @@ lpfc_sli_iocb_cmd_type(uint8_t iocb_cmnd)
 	case CMD_IOCB_LOGENTRY_CN:
 	case CMD_IOCB_LOGENTRY_ASYNC_CN:
 		printk("%s - Unhandled SLI-3 Command x%x\n",
-				__FUNCTION__, iocb_cmnd);
+				__func__, iocb_cmnd);
 		type = LPFC_UNKNOWN_IOCB;
 		break;
 	default:
@@ -1715,7 +1715,7 @@ lpfc_sli_handle_slow_ring_event(struct lpfc_hba *phba,
 		rspiocbp = __lpfc_sli_get_iocbq(phba);
 		if (rspiocbp == NULL) {
 			printk(KERN_ERR "%s: out of buffers! Failing "
-			       "completion.\n", __FUNCTION__);
+			       "completion.\n", __func__);
 			break;
 		}
 
@@ -3793,7 +3793,7 @@ lpfc_sli_validate_fcp_iocb(struct lpfc_iocbq *iocbq, struct lpfc_vport *vport,
 		break;
 	default:
 		printk(KERN_ERR "%s: Unknown context cmd type, value %d\n",
-			__FUNCTION__, ctx_cmd);
+			__func__, ctx_cmd);
 		break;
 	}
 
diff --git a/drivers/scsi/megaraid/mega_common.h b/drivers/scsi/megaraid/mega_common.h
index f62ed468ada0..5ead1283a844 100644
--- a/drivers/scsi/megaraid/mega_common.h
+++ b/drivers/scsi/megaraid/mega_common.h
@@ -265,7 +265,7 @@ typedef struct {
 #define ASSERT(expression)						\
 	if (!(expression)) {						\
 	ASSERT_ACTION("assertion failed:(%s), file: %s, line: %d:%s\n",	\
-			#expression, __FILE__, __LINE__, __FUNCTION__);	\
+			#expression, __FILE__, __LINE__, __func__);	\
 	}
 #else
 #define ASSERT(expression)
diff --git a/drivers/scsi/megaraid/megaraid_mbox.c b/drivers/scsi/megaraid/megaraid_mbox.c
index 70a0f11f48b2..805bb61dde18 100644
--- a/drivers/scsi/megaraid/megaraid_mbox.c
+++ b/drivers/scsi/megaraid/megaraid_mbox.c
@@ -458,7 +458,7 @@ megaraid_probe_one(struct pci_dev *pdev, const struct pci_device_id *id)
 
 	if (adapter == NULL) {
 		con_log(CL_ANN, (KERN_WARNING
-		"megaraid: out of memory, %s %d.\n", __FUNCTION__, __LINE__));
+		"megaraid: out of memory, %s %d.\n", __func__, __LINE__));
 
 		goto out_probe_one;
 	}
@@ -1002,7 +1002,7 @@ megaraid_alloc_cmd_packets(adapter_t *adapter)
 
 	if (!raid_dev->una_mbox64) {
 		con_log(CL_ANN, (KERN_WARNING
-			"megaraid: out of memory, %s %d\n", __FUNCTION__,
+			"megaraid: out of memory, %s %d\n", __func__,
 			__LINE__));
 		return -1;
 	}
@@ -1030,7 +1030,7 @@ megaraid_alloc_cmd_packets(adapter_t *adapter)
 	if (!adapter->ibuf) {
 
 		con_log(CL_ANN, (KERN_WARNING
-			"megaraid: out of memory, %s %d\n", __FUNCTION__,
+			"megaraid: out of memory, %s %d\n", __func__,
 			__LINE__));
 
 		goto out_free_common_mbox;
@@ -1052,7 +1052,7 @@ megaraid_alloc_cmd_packets(adapter_t *adapter)
 
 	if (adapter->kscb_list == NULL) {
 		con_log(CL_ANN, (KERN_WARNING
-			"megaraid: out of memory, %s %d\n", __FUNCTION__,
+			"megaraid: out of memory, %s %d\n", __func__,
 			__LINE__));
 		goto out_free_ibuf;
 	}
@@ -1060,7 +1060,7 @@ megaraid_alloc_cmd_packets(adapter_t *adapter)
 	// memory allocation for our command packets
 	if (megaraid_mbox_setup_dma_pools(adapter) != 0) {
 		con_log(CL_ANN, (KERN_WARNING
-			"megaraid: out of memory, %s %d\n", __FUNCTION__,
+			"megaraid: out of memory, %s %d\n", __func__,
 			__LINE__));
 		goto out_free_scb_list;
 	}
@@ -2981,7 +2981,7 @@ megaraid_mbox_product_info(adapter_t *adapter)
 
 	if (pinfo == NULL) {
 		con_log(CL_ANN, (KERN_WARNING
-			"megaraid: out of memory, %s %d\n", __FUNCTION__,
+			"megaraid: out of memory, %s %d\n", __func__,
 			__LINE__));
 
 		return -1;
@@ -3508,7 +3508,7 @@ megaraid_cmm_register(adapter_t *adapter)
 
 	if (adapter->uscb_list == NULL) {
 		con_log(CL_ANN, (KERN_WARNING
-			"megaraid: out of memory, %s %d\n", __FUNCTION__,
+			"megaraid: out of memory, %s %d\n", __func__,
 			__LINE__));
 		return -1;
 	}
@@ -3879,7 +3879,7 @@ megaraid_sysfs_alloc_resources(adapter_t *adapter)
 		!raid_dev->sysfs_buffer) {
 
 		con_log(CL_ANN, (KERN_WARNING
-			"megaraid: out of memory, %s %d\n", __FUNCTION__,
+			"megaraid: out of memory, %s %d\n", __func__,
 			__LINE__));
 
 		rval = -ENOMEM;
diff --git a/drivers/scsi/megaraid/megaraid_mm.c b/drivers/scsi/megaraid/megaraid_mm.c
index ac3b280c2a72..f680561d2c6f 100644
--- a/drivers/scsi/megaraid/megaraid_mm.c
+++ b/drivers/scsi/megaraid/megaraid_mm.c
@@ -929,7 +929,7 @@ mraid_mm_register_adp(mraid_mmadp_t *lld_adp)
 			!adapter->pthru_dma_pool) {
 
 		con_log(CL_ANN, (KERN_WARNING
-			"megaraid cmm: out of memory, %s %d\n", __FUNCTION__,
+			"megaraid cmm: out of memory, %s %d\n", __func__,
 			__LINE__));
 
 		rval = (-ENOMEM);
@@ -957,7 +957,7 @@ mraid_mm_register_adp(mraid_mmadp_t *lld_adp)
 
 			con_log(CL_ANN, (KERN_WARNING
 				"megaraid cmm: out of memory, %s %d\n",
-					__FUNCTION__, __LINE__));
+					__func__, __LINE__));
 
 			rval = (-ENOMEM);
 
diff --git a/drivers/scsi/megaraid/megaraid_sas.c b/drivers/scsi/megaraid/megaraid_sas.c
index fc7ac158476c..97b763378e7d 100644
--- a/drivers/scsi/megaraid/megaraid_sas.c
+++ b/drivers/scsi/megaraid/megaraid_sas.c
@@ -10,7 +10,7 @@
  *	   2 of the License, or (at your option) any later version.
  *
  * FILE		: megaraid_sas.c
- * Version	: v00.00.03.20-rc1
+ * Version     : v00.00.04.01-rc1
  *
  * Authors:
  *	(email-id : megaraidlinux@lsi.com)
@@ -71,6 +71,10 @@ static struct pci_device_id megasas_pci_table[] = {
 	/* ppc IOP */
 	{PCI_DEVICE(PCI_VENDOR_ID_LSI_LOGIC, PCI_DEVICE_ID_LSI_SAS1078DE)},
 	/* ppc IOP */
+	{PCI_DEVICE(PCI_VENDOR_ID_LSI_LOGIC, PCI_DEVICE_ID_LSI_SAS1078GEN2)},
+	/* gen2*/
+	{PCI_DEVICE(PCI_VENDOR_ID_LSI_LOGIC, PCI_DEVICE_ID_LSI_SAS0079GEN2)},
+	/* gen2*/
 	{PCI_DEVICE(PCI_VENDOR_ID_LSI_LOGIC, PCI_DEVICE_ID_LSI_VERDE_ZCR)},
 	/* xscale IOP, vega */
 	{PCI_DEVICE(PCI_VENDOR_ID_DELL, PCI_DEVICE_ID_DELL_PERC5)},
@@ -198,6 +202,9 @@ megasas_clear_intr_xscale(struct megasas_register_set __iomem * regs)
 	 */
 	writel(status, &regs->outbound_intr_status);
 
+	/* Dummy readl to force pci flush */
+	readl(&regs->outbound_intr_status);
+
 	return 0;
 }
 
@@ -293,6 +300,9 @@ megasas_clear_intr_ppc(struct megasas_register_set __iomem * regs)
 	 */
 	writel(status, &regs->outbound_doorbell_clear);
 
+	/* Dummy readl to force pci flush */
+	readl(&regs->outbound_doorbell_clear);
+
 	return 0;
 }
 /**
@@ -318,6 +328,99 @@ static struct megasas_instance_template megasas_instance_template_ppc = {
 };
 
 /**
+*	The following functions are defined for gen2 (deviceid : 0x78 0x79)
+*	controllers
+*/
+
+/**
+ * megasas_enable_intr_gen2 -  Enables interrupts
+ * @regs:                      MFI register set
+ */
+static inline void
+megasas_enable_intr_gen2(struct megasas_register_set __iomem *regs)
+{
+	writel(0xFFFFFFFF, &(regs)->outbound_doorbell_clear);
+
+	/* write ~0x00000005 (4 & 1) to the intr mask*/
+	writel(~MFI_GEN2_ENABLE_INTERRUPT_MASK, &(regs)->outbound_intr_mask);
+
+	/* Dummy readl to force pci flush */
+	readl(&regs->outbound_intr_mask);
+}
+
+/**
+ * megasas_disable_intr_gen2 - Disables interrupt
+ * @regs:                      MFI register set
+ */
+static inline void
+megasas_disable_intr_gen2(struct megasas_register_set __iomem *regs)
+{
+	u32 mask = 0xFFFFFFFF;
+	writel(mask, &regs->outbound_intr_mask);
+	/* Dummy readl to force pci flush */
+	readl(&regs->outbound_intr_mask);
+}
+
+/**
+ * megasas_read_fw_status_reg_gen2 - returns the current FW status value
+ * @regs:                      MFI register set
+ */
+static u32
+megasas_read_fw_status_reg_gen2(struct megasas_register_set __iomem *regs)
+{
+	return readl(&(regs)->outbound_scratch_pad);
+}
+
+/**
+ * megasas_clear_interrupt_gen2 -      Check & clear interrupt
+ * @regs:                              MFI register set
+ */
+static int
+megasas_clear_intr_gen2(struct megasas_register_set __iomem *regs)
+{
+	u32 status;
+	/*
+	 * Check if it is our interrupt
+	 */
+	status = readl(&regs->outbound_intr_status);
+
+	if (!(status & MFI_GEN2_ENABLE_INTERRUPT_MASK))
+		return 1;
+
+	/*
+	 * Clear the interrupt by writing back the same value
+	 */
+	writel(status, &regs->outbound_doorbell_clear);
+
+	/* Dummy readl to force pci flush */
+	readl(&regs->outbound_intr_status);
+
+	return 0;
+}
+/**
+ * megasas_fire_cmd_gen2 -     Sends command to the FW
+ * @frame_phys_addr :          Physical address of cmd
+ * @frame_count :              Number of frames for the command
+ * @regs :                     MFI register set
+ */
+static inline void
+megasas_fire_cmd_gen2(dma_addr_t frame_phys_addr, u32 frame_count,
+			struct megasas_register_set __iomem *regs)
+{
+	writel((frame_phys_addr | (frame_count<<1))|1,
+			&(regs)->inbound_queue_port);
+}
+
+static struct megasas_instance_template megasas_instance_template_gen2 = {
+
+	.fire_cmd = megasas_fire_cmd_gen2,
+	.enable_intr = megasas_enable_intr_gen2,
+	.disable_intr = megasas_disable_intr_gen2,
+	.clear_intr = megasas_clear_intr_gen2,
+	.read_fw_status_reg = megasas_read_fw_status_reg_gen2,
+};
+
+/**
 *	This is the end of set of functions & definitions
 * 	specific to ppc (deviceid : 0x60) controllers
 */
@@ -1976,7 +2079,12 @@ static int megasas_init_mfi(struct megasas_instance *instance)
 	/*
 	 * Map the message registers
 	 */
-	instance->base_addr = pci_resource_start(instance->pdev, 0);
+	if ((instance->pdev->device == PCI_DEVICE_ID_LSI_SAS1078GEN2) ||
+		(instance->pdev->device == PCI_DEVICE_ID_LSI_SAS0079GEN2)) {
+		instance->base_addr = pci_resource_start(instance->pdev, 1);
+	} else {
+		instance->base_addr = pci_resource_start(instance->pdev, 0);
+	}
 
 	if (pci_request_regions(instance->pdev, "megasas: LSI")) {
 		printk(KERN_DEBUG "megasas: IO memory region busy!\n");
@@ -1998,6 +2106,10 @@ static int megasas_init_mfi(struct megasas_instance *instance)
 		case PCI_DEVICE_ID_LSI_SAS1078DE:
 			instance->instancet = &megasas_instance_template_ppc;
 			break;
+		case PCI_DEVICE_ID_LSI_SAS1078GEN2:
+		case PCI_DEVICE_ID_LSI_SAS0079GEN2:
+			instance->instancet = &megasas_instance_template_gen2;
+			break;
 		case PCI_DEVICE_ID_LSI_SAS1064R:
 		case PCI_DEVICE_ID_DELL_PERC5:
 		default:
@@ -2857,6 +2969,7 @@ static void megasas_shutdown(struct pci_dev *pdev)
 {
 	struct megasas_instance *instance = pci_get_drvdata(pdev);
 	megasas_flush_cache(instance);
+	megasas_shutdown_controller(instance, MR_DCMD_CTRL_SHUTDOWN);
 }
 
 /**
@@ -3292,7 +3405,7 @@ megasas_sysfs_set_dbg_lvl(struct device_driver *dd, const char *buf, size_t coun
 	return retval;
 }
 
-static DRIVER_ATTR(dbg_lvl, S_IRUGO|S_IWUGO, megasas_sysfs_show_dbg_lvl,
+static DRIVER_ATTR(dbg_lvl, S_IRUGO|S_IWUSR, megasas_sysfs_show_dbg_lvl,
 		megasas_sysfs_set_dbg_lvl);
 
 static ssize_t
diff --git a/drivers/scsi/megaraid/megaraid_sas.h b/drivers/scsi/megaraid/megaraid_sas.h
index b0c41e671702..0d033248fdf1 100644
--- a/drivers/scsi/megaraid/megaraid_sas.h
+++ b/drivers/scsi/megaraid/megaraid_sas.h
@@ -18,9 +18,9 @@
 /*
  * MegaRAID SAS Driver meta data
  */
-#define MEGASAS_VERSION			"00.00.03.20-rc1"
-#define MEGASAS_RELDATE			"March 10, 2008"
-#define MEGASAS_EXT_VERSION		"Mon. March 10 11:02:31 PDT 2008"
+#define MEGASAS_VERSION				"00.00.04.01"
+#define MEGASAS_RELDATE				"July 24, 2008"
+#define MEGASAS_EXT_VERSION			"Thu July 24 11:41:51 PST 2008"
 
 /*
  * Device IDs
@@ -28,6 +28,8 @@
 #define	PCI_DEVICE_ID_LSI_SAS1078R		0x0060
 #define	PCI_DEVICE_ID_LSI_SAS1078DE		0x007C
 #define	PCI_DEVICE_ID_LSI_VERDE_ZCR		0x0413
+#define	PCI_DEVICE_ID_LSI_SAS1078GEN2		0x0078
+#define	PCI_DEVICE_ID_LSI_SAS0079GEN2		0x0079
 
 /*
  * =====================================
@@ -580,6 +582,8 @@ struct megasas_ctrl_info {
 #define MEGASAS_COMPLETION_TIMER_INTERVAL      (HZ/10)
 
 #define MFI_REPLY_1078_MESSAGE_INTERRUPT	0x80000000
+#define MFI_REPLY_GEN2_MESSAGE_INTERRUPT	0x00000001
+#define MFI_GEN2_ENABLE_INTERRUPT_MASK		(0x00000001 | 0x00000004)
 
 /*
 * register set for both 1068 and 1078 controllers
diff --git a/drivers/scsi/nsp32.c b/drivers/scsi/nsp32.c
index 7fed35372150..22052bb7becb 100644
--- a/drivers/scsi/nsp32.c
+++ b/drivers/scsi/nsp32.c
@@ -23,7 +23,6 @@
  *   1.2: PowerPC (big endian) support.
  */
 
-#include <linux/version.h>
 #include <linux/module.h>
 #include <linux/init.h>
 #include <linux/kernel.h>
@@ -299,9 +298,9 @@ static struct scsi_host_template nsp32_template = {
 #else
 # define NSP32_DEBUG_MASK	      0xffffff
 # define nsp32_msg(type, args...) \
-	nsp32_message (__FUNCTION__, __LINE__, (type), args)
+	nsp32_message (__func__, __LINE__, (type), args)
 # define nsp32_dbg(mask, args...) \
-	nsp32_dmessage(__FUNCTION__, __LINE__, (mask), args)
+	nsp32_dmessage(__func__, __LINE__, (mask), args)
 #endif
 
 #define NSP32_DEBUG_QUEUECOMMAND	BIT(0)
diff --git a/drivers/scsi/nsp32.h b/drivers/scsi/nsp32.h
index 6715ecb3bfca..9565acf1aa72 100644
--- a/drivers/scsi/nsp32.h
+++ b/drivers/scsi/nsp32.h
@@ -16,7 +16,6 @@
 #ifndef _NSP32_H
 #define _NSP32_H
 
-#include <linux/version.h>
 //#define NSP32_DEBUG 9
 
 /*
diff --git a/drivers/scsi/nsp32_debug.c b/drivers/scsi/nsp32_debug.c
index ef3c59cbcff6..2fb3fb58858d 100644
--- a/drivers/scsi/nsp32_debug.c
+++ b/drivers/scsi/nsp32_debug.c
@@ -88,7 +88,7 @@ static void print_commandk (unsigned char *command)
 	int i,s;
 //	printk(KERN_DEBUG);
 	print_opcodek(command[0]);
-	/*printk(KERN_DEBUG "%s ", __FUNCTION__);*/
+	/*printk(KERN_DEBUG "%s ", __func__);*/
 	if ((command[0] >> 5) == 6 ||
 	    (command[0] >> 5) == 7 ) {
 		s = 12; /* vender specific */
diff --git a/drivers/scsi/pcmcia/nsp_cs.c b/drivers/scsi/pcmcia/nsp_cs.c
index 5082ca3c6876..24e6cb8396e3 100644
--- a/drivers/scsi/pcmcia/nsp_cs.c
+++ b/drivers/scsi/pcmcia/nsp_cs.c
@@ -25,7 +25,6 @@
 
 ***********************************************************************/
 
-#include <linux/version.h>
 #include <linux/module.h>
 #include <linux/kernel.h>
 #include <linux/init.h>
@@ -107,9 +106,9 @@ static nsp_hw_data nsp_data_base; /* attach <-> detect glue */
 #else
 # define NSP_DEBUG_MASK		0xffffff
 # define nsp_msg(type, args...) \
-	nsp_cs_message (__FUNCTION__, __LINE__, (type), args)
+	nsp_cs_message (__func__, __LINE__, (type), args)
 # define nsp_dbg(mask, args...) \
-	nsp_cs_dmessage(__FUNCTION__, __LINE__, (mask), args)
+	nsp_cs_dmessage(__func__, __LINE__, (mask), args)
 #endif
 
 #define NSP_DEBUG_QUEUECOMMAND		BIT(0)
diff --git a/drivers/scsi/pcmcia/nsp_debug.c b/drivers/scsi/pcmcia/nsp_debug.c
index 2f75fe6e35a7..3c6ef64fcbff 100644
--- a/drivers/scsi/pcmcia/nsp_debug.c
+++ b/drivers/scsi/pcmcia/nsp_debug.c
@@ -90,7 +90,7 @@ static void print_commandk (unsigned char *command)
 	int i, s;
 	printk(KERN_DEBUG);
 	print_opcodek(command[0]);
-	/*printk(KERN_DEBUG "%s ", __FUNCTION__);*/
+	/*printk(KERN_DEBUG "%s ", __func__);*/
 	if ((command[0] >> 5) == 6 ||
 	    (command[0] >> 5) == 7 ) {
 		s = 12; /* vender specific */
diff --git a/drivers/scsi/ppa.c b/drivers/scsi/ppa.c
index f655ae320b48..8aa0bd987e29 100644
--- a/drivers/scsi/ppa.c
+++ b/drivers/scsi/ppa.c
@@ -171,7 +171,7 @@ static int device_check(ppa_struct *dev);
 
 #if PPA_DEBUG > 0
 #define ppa_fail(x,y) printk("ppa: ppa_fail(%i) from %s at line %d\n",\
-	   y, __FUNCTION__, __LINE__); ppa_fail_func(x,y);
+	   y, __func__, __LINE__); ppa_fail_func(x,y);
 static inline void ppa_fail_func(ppa_struct *dev, int error_code)
 #else
 static inline void ppa_fail(ppa_struct *dev, int error_code)
diff --git a/drivers/scsi/qla1280.c b/drivers/scsi/qla1280.c
index 3754ab87f89a..37f9ba0cd798 100644
--- a/drivers/scsi/qla1280.c
+++ b/drivers/scsi/qla1280.c
@@ -1695,7 +1695,7 @@ qla1280_load_firmware_dma(struct scsi_qla_host *ha)
 	risc_code_size = *ql1280_board_tbl[ha->devnum].fwlen;
 
 	dprintk(1, "%s: DMA RISC code (%i) words\n",
-			__FUNCTION__, risc_code_size);
+			__func__, risc_code_size);
 
 	num = 0;
 	while (risc_code_size > 0) {
@@ -1721,7 +1721,7 @@ qla1280_load_firmware_dma(struct scsi_qla_host *ha)
 		mb[7] = pci_dma_hi32(ha->request_dma) & 0xffff;
 		mb[6] = pci_dma_hi32(ha->request_dma) >> 16;
 		dprintk(2, "%s: op=%d  0x%p = 0x%4x,0x%4x,0x%4x,0x%4x\n",
-				__FUNCTION__, mb[0],
+				__func__, mb[0],
 				(void *)(long)ha->request_dma,
 				mb[6], mb[7], mb[2], mb[3]);
 		err = qla1280_mailbox_command(ha, BIT_4 | BIT_3 | BIT_2 |
@@ -1753,10 +1753,10 @@ qla1280_load_firmware_dma(struct scsi_qla_host *ha)
 			if (tbuf[i] != sp[i] && warn++ < 10) {
 				printk(KERN_ERR "%s: FW compare error @ "
 						"byte(0x%x) loop#=%x\n",
-						__FUNCTION__, i, num);
+						__func__, i, num);
 				printk(KERN_ERR "%s: FWbyte=%x  "
 						"FWfromChip=%x\n",
-						__FUNCTION__, sp[i], tbuf[i]);
+						__func__, sp[i], tbuf[i]);
 				/*break; */
 			}
 		}
@@ -1781,7 +1781,7 @@ qla1280_start_firmware(struct scsi_qla_host *ha)
 	int err;
 
 	dprintk(1, "%s: Verifying checksum of loaded RISC code.\n",
-			__FUNCTION__);
+			__func__);
 
 	/* Verify checksum of loaded RISC code. */
 	mb[0] = MBC_VERIFY_CHECKSUM;
@@ -1794,7 +1794,7 @@ qla1280_start_firmware(struct scsi_qla_host *ha)
 	}
 
 	/* Start firmware execution. */
-	dprintk(1, "%s: start firmware running.\n", __FUNCTION__);
+	dprintk(1, "%s: start firmware running.\n", __func__);
 	mb[0] = MBC_EXECUTE_FIRMWARE;
 	mb[1] = *ql1280_board_tbl[ha->devnum].fwstart;
 	err = qla1280_mailbox_command(ha, BIT_1 | BIT_0, &mb[0]);
diff --git a/drivers/scsi/qla2xxx/qla_attr.c b/drivers/scsi/qla2xxx/qla_attr.c
index 8dd88fc1244a..45e7dcb4b34d 100644
--- a/drivers/scsi/qla2xxx/qla_attr.c
+++ b/drivers/scsi/qla2xxx/qla_attr.c
@@ -8,6 +8,7 @@
 
 #include <linux/kthread.h>
 #include <linux/vmalloc.h>
+#include <linux/delay.h>
 
 static int qla24xx_vport_disable(struct fc_vport *, bool);
 
@@ -20,18 +21,12 @@ qla2x00_sysfs_read_fw_dump(struct kobject *kobj,
 {
 	struct scsi_qla_host *ha = shost_priv(dev_to_shost(container_of(kobj,
 	    struct device, kobj)));
-	char *rbuf = (char *)ha->fw_dump;
 
 	if (ha->fw_dump_reading == 0)
 		return 0;
-	if (off > ha->fw_dump_len)
-                return 0;
-	if (off + count > ha->fw_dump_len)
-		count = ha->fw_dump_len - off;
 
-	memcpy(buf, &rbuf[off], count);
-
-	return (count);
+	return memory_read_from_buffer(buf, count, &off, ha->fw_dump,
+					ha->fw_dump_len);
 }
 
 static ssize_t
@@ -94,20 +89,13 @@ qla2x00_sysfs_read_nvram(struct kobject *kobj,
 {
 	struct scsi_qla_host *ha = shost_priv(dev_to_shost(container_of(kobj,
 	    struct device, kobj)));
-	int		size = ha->nvram_size;
-	char		*nvram_cache = ha->nvram;
 
-	if (!capable(CAP_SYS_ADMIN) || off > size || count == 0)
+	if (!capable(CAP_SYS_ADMIN))
 		return 0;
-	if (off + count > size) {
-		size -= off;
-		count = size;
-	}
 
 	/* Read NVRAM data from cache. */
-	memcpy(buf, &nvram_cache[off], count);
-
-	return count;
+	return memory_read_from_buffer(buf, count, &off, ha->nvram,
+					ha->nvram_size);
 }
 
 static ssize_t
@@ -175,14 +163,9 @@ qla2x00_sysfs_read_optrom(struct kobject *kobj,
 
 	if (ha->optrom_state != QLA_SREADING)
 		return 0;
-	if (off > ha->optrom_region_size)
-		return 0;
-	if (off + count > ha->optrom_region_size)
-		count = ha->optrom_region_size - off;
-
-	memcpy(buf, &ha->optrom_buffer[off], count);
 
-	return count;
+	return memory_read_from_buffer(buf, count, &off, ha->optrom_buffer,
+					ha->optrom_region_size);
 }
 
 static ssize_t
@@ -374,20 +357,12 @@ qla2x00_sysfs_read_vpd(struct kobject *kobj,
 {
 	struct scsi_qla_host *ha = shost_priv(dev_to_shost(container_of(kobj,
 	    struct device, kobj)));
-	int           size = ha->vpd_size;
-	char          *vpd_cache = ha->vpd;
 
-	if (!capable(CAP_SYS_ADMIN) || off > size || count == 0)
+	if (!capable(CAP_SYS_ADMIN))
 		return 0;
-	if (off + count > size) {
-		size -= off;
-		count = size;
-	}
 
 	/* Read NVRAM data from cache. */
-	memcpy(buf, &vpd_cache[off], count);
-
-	return count;
+	return memory_read_from_buffer(buf, count, &off, ha->vpd, ha->vpd_size);
 }
 
 static ssize_t
@@ -557,8 +532,10 @@ qla2x00_serial_num_show(struct device *dev, struct device_attribute *attr,
 	scsi_qla_host_t *ha = shost_priv(class_to_shost(dev));
 	uint32_t sn;
 
-	if (IS_FWI2_CAPABLE(ha))
-		return snprintf(buf, PAGE_SIZE, "\n");
+	if (IS_FWI2_CAPABLE(ha)) {
+		qla2xxx_get_vpd_field(ha, "SN", buf, PAGE_SIZE);
+		return snprintf(buf, PAGE_SIZE, "%s\n", buf);
+	}
 
 	sn = ((ha->serial0 & 0x1f) << 16) | (ha->serial2 << 8) | ha->serial1;
 	return snprintf(buf, PAGE_SIZE, "%c%05d\n", 'A' + sn / 100000,
@@ -809,6 +786,16 @@ qla2x00_optrom_fw_version_show(struct device *dev,
 	    ha->fw_revision[3]);
 }
 
+static ssize_t
+qla2x00_total_isp_aborts_show(struct device *dev,
+			      struct device_attribute *attr, char *buf)
+{
+	scsi_qla_host_t *ha = shost_priv(class_to_shost(dev));
+
+	return snprintf(buf, PAGE_SIZE, "%d\n",
+	    ha->qla_stats.total_isp_aborts);
+}
+
 static DEVICE_ATTR(driver_version, S_IRUGO, qla2x00_drvr_version_show, NULL);
 static DEVICE_ATTR(fw_version, S_IRUGO, qla2x00_fw_version_show, NULL);
 static DEVICE_ATTR(serial_num, S_IRUGO, qla2x00_serial_num_show, NULL);
@@ -831,6 +818,8 @@ static DEVICE_ATTR(optrom_fcode_version, S_IRUGO,
 		   qla2x00_optrom_fcode_version_show, NULL);
 static DEVICE_ATTR(optrom_fw_version, S_IRUGO, qla2x00_optrom_fw_version_show,
 		   NULL);
+static DEVICE_ATTR(total_isp_aborts, S_IRUGO, qla2x00_total_isp_aborts_show,
+		   NULL);
 
 struct device_attribute *qla2x00_host_attrs[] = {
 	&dev_attr_driver_version,
@@ -849,6 +838,7 @@ struct device_attribute *qla2x00_host_attrs[] = {
 	&dev_attr_optrom_efi_version,
 	&dev_attr_optrom_fcode_version,
 	&dev_attr_optrom_fw_version,
+	&dev_attr_total_isp_aborts,
 	NULL,
 };
 
@@ -972,26 +962,50 @@ qla2x00_get_starget_port_id(struct scsi_target *starget)
 }
 
 static void
-qla2x00_get_rport_loss_tmo(struct fc_rport *rport)
+qla2x00_set_rport_loss_tmo(struct fc_rport *rport, uint32_t timeout)
 {
-	struct Scsi_Host *host = rport_to_shost(rport);
-	scsi_qla_host_t *ha = shost_priv(host);
-
-	rport->dev_loss_tmo = ha->port_down_retry_count + 5;
+	if (timeout)
+		rport->dev_loss_tmo = timeout;
+	else
+		rport->dev_loss_tmo = 1;
 }
 
 static void
-qla2x00_set_rport_loss_tmo(struct fc_rport *rport, uint32_t timeout)
+qla2x00_dev_loss_tmo_callbk(struct fc_rport *rport)
 {
 	struct Scsi_Host *host = rport_to_shost(rport);
-	scsi_qla_host_t *ha = shost_priv(host);
+	fc_port_t *fcport = *(fc_port_t **)rport->dd_data;
+
+	qla2x00_abort_fcport_cmds(fcport);
+
+	/*
+	 * Transport has effectively 'deleted' the rport, clear
+	 * all local references.
+	 */
+	spin_lock_irq(host->host_lock);
+	fcport->rport = NULL;
+	*((fc_port_t **)rport->dd_data) = NULL;
+	spin_unlock_irq(host->host_lock);
+}
 
-	if (timeout)
-		ha->port_down_retry_count = timeout;
-	else
-		ha->port_down_retry_count = 1;
+static void
+qla2x00_terminate_rport_io(struct fc_rport *rport)
+{
+	fc_port_t *fcport = *(fc_port_t **)rport->dd_data;
+
+	/*
+	 * At this point all fcport's software-states are cleared.  Perform any
+	 * final cleanup of firmware resources (PCBs and XCBs).
+	 */
+	if (fcport->loop_id != FC_NO_LOOP_ID) {
+		fcport->ha->isp_ops->fabric_logout(fcport->ha, fcport->loop_id,
+		    fcport->d_id.b.domain, fcport->d_id.b.area,
+		    fcport->d_id.b.al_pa);
+		fcport->loop_id = FC_NO_LOOP_ID;
+	}
 
-	rport->dev_loss_tmo = ha->port_down_retry_count + 5;
+	qla2x00_abort_fcport_cmds(fcport);
+	scsi_target_unblock(&rport->dev);
 }
 
 static int
@@ -1045,6 +1059,7 @@ qla2x00_get_fc_host_stats(struct Scsi_Host *shost)
 	pfc_host_stat->invalid_tx_word_count = stats->inval_xmit_word_cnt;
 	pfc_host_stat->invalid_crc_count = stats->inval_crc_cnt;
 	if (IS_FWI2_CAPABLE(ha)) {
+		pfc_host_stat->lip_count = stats->lip_cnt;
 		pfc_host_stat->tx_frames = stats->tx_frames;
 		pfc_host_stat->rx_frames = stats->rx_frames;
 		pfc_host_stat->dumped_frames = stats->dumped_frames;
@@ -1173,17 +1188,16 @@ vport_create_failed_2:
 static int
 qla24xx_vport_delete(struct fc_vport *fc_vport)
 {
-	scsi_qla_host_t *ha = shost_priv(fc_vport->shost);
 	scsi_qla_host_t *vha = fc_vport->dd_data;
+	scsi_qla_host_t *pha = to_qla_parent(vha);
+
+	while (test_bit(LOOP_RESYNC_ACTIVE, &vha->dpc_flags) ||
+	    test_bit(FCPORT_UPDATE_NEEDED, &pha->dpc_flags))
+		msleep(1000);
 
 	qla24xx_disable_vp(vha);
 	qla24xx_deallocate_vp_id(vha);
 
-	mutex_lock(&ha->vport_lock);
-	ha->cur_vport_count--;
-	clear_bit(vha->vp_idx, ha->vp_idx_map);
-	mutex_unlock(&ha->vport_lock);
-
 	kfree(vha->node_name);
 	kfree(vha->port_name);
 
@@ -1248,11 +1262,12 @@ struct fc_function_template qla2xxx_transport_functions = {
 	.get_starget_port_id  = qla2x00_get_starget_port_id,
 	.show_starget_port_id = 1,
 
-	.get_rport_dev_loss_tmo = qla2x00_get_rport_loss_tmo,
 	.set_rport_dev_loss_tmo = qla2x00_set_rport_loss_tmo,
 	.show_rport_dev_loss_tmo = 1,
 
 	.issue_fc_host_lip = qla2x00_issue_lip,
+	.dev_loss_tmo_callbk = qla2x00_dev_loss_tmo_callbk,
+	.terminate_rport_io = qla2x00_terminate_rport_io,
 	.get_fc_host_stats = qla2x00_get_fc_host_stats,
 
 	.vport_create = qla24xx_vport_create,
@@ -1291,11 +1306,12 @@ struct fc_function_template qla2xxx_transport_vport_functions = {
 	.get_starget_port_id  = qla2x00_get_starget_port_id,
 	.show_starget_port_id = 1,
 
-	.get_rport_dev_loss_tmo = qla2x00_get_rport_loss_tmo,
 	.set_rport_dev_loss_tmo = qla2x00_set_rport_loss_tmo,
 	.show_rport_dev_loss_tmo = 1,
 
 	.issue_fc_host_lip = qla2x00_issue_lip,
+	.dev_loss_tmo_callbk = qla2x00_dev_loss_tmo_callbk,
+	.terminate_rport_io = qla2x00_terminate_rport_io,
 	.get_fc_host_stats = qla2x00_get_fc_host_stats,
 };
 
diff --git a/drivers/scsi/qla2xxx/qla_dbg.c b/drivers/scsi/qla2xxx/qla_dbg.c
index cbef785765cf..510ba64bc286 100644
--- a/drivers/scsi/qla2xxx/qla_dbg.c
+++ b/drivers/scsi/qla2xxx/qla_dbg.c
@@ -216,7 +216,7 @@ qla24xx_soft_reset(scsi_qla_host_t *ha)
 
 static int
 qla2xxx_dump_ram(scsi_qla_host_t *ha, uint32_t addr, uint16_t *ram,
-    uint16_t ram_words, void **nxt)
+    uint32_t ram_words, void **nxt)
 {
 	int rval;
 	uint32_t cnt, stat, timer, words, idx;
diff --git a/drivers/scsi/qla2xxx/qla_def.h b/drivers/scsi/qla2xxx/qla_def.h
index 8dd600013bd1..94a720eabfd8 100644
--- a/drivers/scsi/qla2xxx/qla_def.h
+++ b/drivers/scsi/qla2xxx/qla_def.h
@@ -864,7 +864,8 @@ struct link_statistics {
 	uint32_t prim_seq_err_cnt;
 	uint32_t inval_xmit_word_cnt;
 	uint32_t inval_crc_cnt;
-	uint32_t unused1[0x1b];
+	uint32_t lip_cnt;
+	uint32_t unused1[0x1a];
 	uint32_t tx_frames;
 	uint32_t rx_frames;
 	uint32_t dumped_frames;
@@ -1544,7 +1545,6 @@ typedef struct fc_port {
 	int login_retry;
 	atomic_t port_down_timer;
 
-	spinlock_t rport_lock;
 	struct fc_rport *rport, *drport;
 	u32 supported_classes;
 
@@ -2155,6 +2155,10 @@ struct qla_chip_state_84xx {
 	uint32_t gold_fw_version;
 };
 
+struct qla_statistics {
+	uint32_t total_isp_aborts;
+};
+
 /*
  * Linux Host Adapter structure
  */
@@ -2166,7 +2170,6 @@ typedef struct scsi_qla_host {
 	struct pci_dev	*pdev;
 
 	unsigned long	host_no;
-	unsigned long	instance;
 
 	volatile struct {
 		uint32_t	init_done		:1;
@@ -2234,6 +2237,7 @@ typedef struct scsi_qla_host {
 #define REGISTER_FDMI_NEEDED	26
 #define FCPORT_UPDATE_NEEDED	27
 #define VP_DPC_NEEDED		28	/* wake up for VP dpc handling */
+#define UNLOADING		29
 
 	uint32_t	device_flags;
 #define DFLG_LOCAL_DEVICES		BIT_0
@@ -2515,7 +2519,7 @@ typedef struct scsi_qla_host {
 
 	uint8_t		model_number[16+1];
 #define BINZERO		"\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0"
-	char		*model_desc;
+	char		model_desc[80];
 	uint8_t		adapter_id[16+1];
 
 	uint8_t		*node_name;
@@ -2596,6 +2600,7 @@ typedef struct scsi_qla_host {
 	int		cur_vport_count;
 
 	struct qla_chip_state_84xx *cs84xx;
+	struct qla_statistics qla_stats;
 } scsi_qla_host_t;
 
 
diff --git a/drivers/scsi/qla2xxx/qla_gbl.h b/drivers/scsi/qla2xxx/qla_gbl.h
index 9b4bebee6879..0b156735e9a6 100644
--- a/drivers/scsi/qla2xxx/qla_gbl.h
+++ b/drivers/scsi/qla2xxx/qla_gbl.h
@@ -62,7 +62,7 @@ extern int ql2xfdmienable;
 extern int ql2xallocfwdump;
 extern int ql2xextended_error_logging;
 extern int ql2xqfullrampup;
-extern int num_hosts;
+extern int ql2xiidmaenable;
 
 extern int qla2x00_loop_reset(scsi_qla_host_t *);
 extern void qla2x00_abort_all_cmds(scsi_qla_host_t *, int);
@@ -71,6 +71,8 @@ extern int qla2x00_post_aen_work(struct scsi_qla_host *, enum
 extern int qla2x00_post_hwe_work(struct scsi_qla_host *, uint16_t , uint16_t,
     uint16_t, uint16_t);
 
+extern void qla2x00_abort_fcport_cmds(fc_port_t *);
+
 /*
  * Global Functions in qla_mid.c source file.
  */
@@ -312,6 +314,7 @@ extern int qla2xxx_hw_event_log(scsi_qla_host_t *, uint16_t , uint16_t,
     uint16_t, uint16_t);
 
 extern void qla2xxx_get_flash_info(scsi_qla_host_t *);
+extern int qla2xxx_get_vpd_field(scsi_qla_host_t *, char *, char *, size_t);
 
 /*
  * Global Function Prototypes in qla_dbg.c source file.
diff --git a/drivers/scsi/qla2xxx/qla_gs.c b/drivers/scsi/qla2xxx/qla_gs.c
index 4cb80b476c85..c2a4bfbcb05b 100644
--- a/drivers/scsi/qla2xxx/qla_gs.c
+++ b/drivers/scsi/qla2xxx/qla_gs.c
@@ -1661,6 +1661,12 @@ qla2x00_fdmi_register(scsi_qla_host_t *ha)
 {
 	int rval;
 
+	if (IS_QLA2100(ha) || IS_QLA2200(ha)) {
+		DEBUG2(printk("scsi(%ld): FDMI unsupported on "
+		    "ISP2100/ISP2200.\n", ha->host_no));
+		return QLA_SUCCESS;
+	}
+
 	rval = qla2x00_mgmt_svr_login(ha);
 	if (rval)
 		return rval;
diff --git a/drivers/scsi/qla2xxx/qla_init.c b/drivers/scsi/qla2xxx/qla_init.c
index bbbc5a632a1d..ee89ddd64aae 100644
--- a/drivers/scsi/qla2xxx/qla_init.c
+++ b/drivers/scsi/qla2xxx/qla_init.c
@@ -334,6 +334,8 @@ static int
 qla2x00_isp_firmware(scsi_qla_host_t *ha)
 {
 	int  rval;
+	uint16_t loop_id, topo, sw_cap;
+	uint8_t domain, area, al_pa;
 
 	/* Assume loading risc code */
 	rval = QLA_FUNCTION_FAILED;
@@ -345,6 +347,11 @@ qla2x00_isp_firmware(scsi_qla_host_t *ha)
 
 		/* Verify checksum of loaded RISC code. */
 		rval = qla2x00_verify_checksum(ha, ha->fw_srisc_address);
+		if (rval == QLA_SUCCESS) {
+			/* And, verify we are not in ROM code. */
+			rval = qla2x00_get_adapter_id(ha, &loop_id, &al_pa,
+			    &area, &domain, &topo, &sw_cap);
+		}
 	}
 
 	if (rval) {
@@ -722,7 +729,7 @@ qla24xx_chip_diag(scsi_qla_host_t *ha)
 	/* Perform RISC reset. */
 	qla24xx_reset_risc(ha);
 
-	ha->fw_transfer_size = REQUEST_ENTRY_SIZE * 1024;
+	ha->fw_transfer_size = REQUEST_ENTRY_SIZE * ha->request_q_length;
 
 	rval = qla2x00_mbx_reg_test(ha);
 	if (rval) {
@@ -768,42 +775,16 @@ qla2x00_alloc_fw_dump(scsi_qla_host_t *ha)
 		mem_size = (ha->fw_memory_size - 0x100000 + 1) *
 		    sizeof(uint32_t);
 
-		/* Allocate memory for Extended Trace Buffer. */
-		tc = dma_alloc_coherent(&ha->pdev->dev, EFT_SIZE, &tc_dma,
-		    GFP_KERNEL);
-		if (!tc) {
-			qla_printk(KERN_WARNING, ha, "Unable to allocate "
-			    "(%d KB) for EFT.\n", EFT_SIZE / 1024);
-			goto cont_alloc;
-		}
-
-		memset(tc, 0, EFT_SIZE);
-		rval = qla2x00_enable_eft_trace(ha, tc_dma, EFT_NUM_BUFFERS);
-		if (rval) {
-			qla_printk(KERN_WARNING, ha, "Unable to initialize "
-			    "EFT (%d).\n", rval);
-			dma_free_coherent(&ha->pdev->dev, EFT_SIZE, tc,
-			    tc_dma);
-			goto cont_alloc;
-		}
-
-		qla_printk(KERN_INFO, ha, "Allocated (%d KB) for EFT...\n",
-		    EFT_SIZE / 1024);
-
-		eft_size = EFT_SIZE;
-		ha->eft_dma = tc_dma;
-		ha->eft = tc;
-
 		/* Allocate memory for Fibre Channel Event Buffer. */
 		if (!IS_QLA25XX(ha))
-			goto cont_alloc;
+			goto try_eft;
 
 		tc = dma_alloc_coherent(&ha->pdev->dev, FCE_SIZE, &tc_dma,
 		    GFP_KERNEL);
 		if (!tc) {
 			qla_printk(KERN_WARNING, ha, "Unable to allocate "
 			    "(%d KB) for FCE.\n", FCE_SIZE / 1024);
-			goto cont_alloc;
+			goto try_eft;
 		}
 
 		memset(tc, 0, FCE_SIZE);
@@ -815,7 +796,7 @@ qla2x00_alloc_fw_dump(scsi_qla_host_t *ha)
 			dma_free_coherent(&ha->pdev->dev, FCE_SIZE, tc,
 			    tc_dma);
 			ha->flags.fce_enabled = 0;
-			goto cont_alloc;
+			goto try_eft;
 		}
 
 		qla_printk(KERN_INFO, ha, "Allocated (%d KB) for FCE...\n",
@@ -825,6 +806,32 @@ qla2x00_alloc_fw_dump(scsi_qla_host_t *ha)
 		ha->flags.fce_enabled = 1;
 		ha->fce_dma = tc_dma;
 		ha->fce = tc;
+try_eft:
+		/* Allocate memory for Extended Trace Buffer. */
+		tc = dma_alloc_coherent(&ha->pdev->dev, EFT_SIZE, &tc_dma,
+		    GFP_KERNEL);
+		if (!tc) {
+			qla_printk(KERN_WARNING, ha, "Unable to allocate "
+			    "(%d KB) for EFT.\n", EFT_SIZE / 1024);
+			goto cont_alloc;
+		}
+
+		memset(tc, 0, EFT_SIZE);
+		rval = qla2x00_enable_eft_trace(ha, tc_dma, EFT_NUM_BUFFERS);
+		if (rval) {
+			qla_printk(KERN_WARNING, ha, "Unable to initialize "
+			    "EFT (%d).\n", rval);
+			dma_free_coherent(&ha->pdev->dev, EFT_SIZE, tc,
+			    tc_dma);
+			goto cont_alloc;
+		}
+
+		qla_printk(KERN_INFO, ha, "Allocated (%d KB) for EFT...\n",
+		    EFT_SIZE / 1024);
+
+		eft_size = EFT_SIZE;
+		ha->eft_dma = tc_dma;
+		ha->eft = tc;
 	}
 cont_alloc:
 	req_q_size = ha->request_q_length * sizeof(request_t);
@@ -969,8 +976,9 @@ qla2x00_setup_chip(scsi_qla_host_t *ha)
 				    &ha->fw_attributes, &ha->fw_memory_size);
 				qla2x00_resize_request_q(ha);
 				ha->flags.npiv_supported = 0;
-				if ((IS_QLA24XX(ha) || IS_QLA25XX(ha)) &&
-				    (ha->fw_attributes & BIT_2)) {
+				if ((IS_QLA24XX(ha) || IS_QLA25XX(ha) ||
+				     IS_QLA84XX(ha)) &&
+					 (ha->fw_attributes & BIT_2)) {
 					ha->flags.npiv_supported = 1;
 					if ((!ha->max_npiv_vports) ||
 					    ((ha->max_npiv_vports + 1) %
@@ -1501,18 +1509,25 @@ qla2x00_set_model_info(scsi_qla_host_t *ha, uint8_t *model, size_t len, char *de
 		index = (ha->pdev->subsystem_device & 0xff);
 		if (ha->pdev->subsystem_vendor == PCI_VENDOR_ID_QLOGIC &&
 		    index < QLA_MODEL_NAMES)
-			ha->model_desc = qla2x00_model_name[index * 2 + 1];
+			strncpy(ha->model_desc,
+			    qla2x00_model_name[index * 2 + 1],
+			    sizeof(ha->model_desc) - 1);
 	} else {
 		index = (ha->pdev->subsystem_device & 0xff);
 		if (ha->pdev->subsystem_vendor == PCI_VENDOR_ID_QLOGIC &&
 		    index < QLA_MODEL_NAMES) {
 			strcpy(ha->model_number,
 			    qla2x00_model_name[index * 2]);
-			ha->model_desc = qla2x00_model_name[index * 2 + 1];
+			strncpy(ha->model_desc,
+			    qla2x00_model_name[index * 2 + 1],
+			    sizeof(ha->model_desc) - 1);
 		} else {
 			strcpy(ha->model_number, def);
 		}
 	}
+	if (IS_FWI2_CAPABLE(ha))
+		qla2xxx_get_vpd_field(ha, "\x82", ha->model_desc,
+		    sizeof(ha->model_desc));
 }
 
 /* On sparc systems, obtain port and node WWN from firmware
@@ -1864,12 +1879,11 @@ qla2x00_rport_del(void *data)
 {
 	fc_port_t *fcport = data;
 	struct fc_rport *rport;
-	unsigned long flags;
 
-	spin_lock_irqsave(&fcport->rport_lock, flags);
+	spin_lock_irq(fcport->ha->host->host_lock);
 	rport = fcport->drport;
 	fcport->drport = NULL;
-	spin_unlock_irqrestore(&fcport->rport_lock, flags);
+	spin_unlock_irq(fcport->ha->host->host_lock);
 	if (rport)
 		fc_remote_port_delete(rport);
 }
@@ -1898,7 +1912,6 @@ qla2x00_alloc_fcport(scsi_qla_host_t *ha, gfp_t flags)
 	atomic_set(&fcport->state, FCS_UNCONFIGURED);
 	fcport->flags = FCF_RLC_SUPPORT;
 	fcport->supported_classes = FC_COS_UNSPECIFIED;
-	spin_lock_init(&fcport->rport_lock);
 
 	return fcport;
 }
@@ -2007,8 +2020,10 @@ qla2x00_configure_loop(scsi_qla_host_t *ha)
 	if (test_bit(LOOP_RESYNC_NEEDED, &ha->dpc_flags)) {
 		if (test_bit(LOCAL_LOOP_UPDATE, &save_flags))
 			set_bit(LOCAL_LOOP_UPDATE, &ha->dpc_flags);
-		if (test_bit(RSCN_UPDATE, &save_flags))
+		if (test_bit(RSCN_UPDATE, &save_flags)) {
+			ha->flags.rscn_queue_overflow = 1;
 			set_bit(RSCN_UPDATE, &ha->dpc_flags);
+		}
 	}
 
 	return (rval);
@@ -2243,28 +2258,24 @@ qla2x00_reg_remote_port(scsi_qla_host_t *ha, fc_port_t *fcport)
 {
 	struct fc_rport_identifiers rport_ids;
 	struct fc_rport *rport;
-	unsigned long flags;
 
 	if (fcport->drport)
 		qla2x00_rport_del(fcport);
-	if (fcport->rport)
-		return;
 
 	rport_ids.node_name = wwn_to_u64(fcport->node_name);
 	rport_ids.port_name = wwn_to_u64(fcport->port_name);
 	rport_ids.port_id = fcport->d_id.b.domain << 16 |
 	    fcport->d_id.b.area << 8 | fcport->d_id.b.al_pa;
 	rport_ids.roles = FC_RPORT_ROLE_UNKNOWN;
-	rport = fc_remote_port_add(ha->host, 0, &rport_ids);
+	fcport->rport = rport = fc_remote_port_add(ha->host, 0, &rport_ids);
 	if (!rport) {
 		qla_printk(KERN_WARNING, ha,
 		    "Unable to allocate fc remote port!\n");
 		return;
 	}
-	spin_lock_irqsave(&fcport->rport_lock, flags);
-	fcport->rport = rport;
+	spin_lock_irq(fcport->ha->host->host_lock);
 	*((fc_port_t **)rport->dd_data) = fcport;
-	spin_unlock_irqrestore(&fcport->rport_lock, flags);
+	spin_unlock_irq(fcport->ha->host->host_lock);
 
 	rport->supported_classes = fcport->supported_classes;
 
@@ -2565,7 +2576,8 @@ qla2x00_find_all_fabric_devs(scsi_qla_host_t *ha, struct list_head *new_fcports)
 		} else if (qla2x00_gnn_id(ha, swl) != QLA_SUCCESS) {
 			kfree(swl);
 			swl = NULL;
-		} else if (qla2x00_gfpn_id(ha, swl) == QLA_SUCCESS) {
+		} else if (ql2xiidmaenable &&
+		    qla2x00_gfpn_id(ha, swl) == QLA_SUCCESS) {
 			qla2x00_gpsc(ha, swl);
 		}
 	}
@@ -3220,7 +3232,8 @@ qla2x00_update_fcports(scsi_qla_host_t *ha)
 
 	/* Go with deferred removal of rport references. */
 	list_for_each_entry(fcport, &ha->fcports, list)
-		if (fcport->drport)
+		if (fcport->drport &&
+		    atomic_read(&fcport->state) != FCS_UNCONFIGURED)
 			qla2x00_rport_del(fcport);
 }
 
@@ -3239,10 +3252,12 @@ qla2x00_abort_isp(scsi_qla_host_t *ha)
 {
 	int rval;
 	uint8_t        status = 0;
+	scsi_qla_host_t *vha;
 
 	if (ha->flags.online) {
 		ha->flags.online = 0;
 		clear_bit(ISP_ABORT_NEEDED, &ha->dpc_flags);
+		ha->qla_stats.total_isp_aborts++;
 
 		qla_printk(KERN_INFO, ha,
 		    "Performing ISP error recovery - ha= %p.\n", ha);
@@ -3252,6 +3267,8 @@ qla2x00_abort_isp(scsi_qla_host_t *ha)
 		if (atomic_read(&ha->loop_state) != LOOP_DOWN) {
 			atomic_set(&ha->loop_state, LOOP_DOWN);
 			qla2x00_mark_all_devices_lost(ha, 0);
+			list_for_each_entry(vha, &ha->vp_list, vp_list)
+			       qla2x00_mark_all_devices_lost(vha, 0);
 		} else {
 			if (!atomic_read(&ha->loop_down_timer))
 				atomic_set(&ha->loop_down_timer,
@@ -3283,17 +3300,6 @@ qla2x00_abort_isp(scsi_qla_host_t *ha)
 			ha->isp_abort_cnt = 0;
 			clear_bit(ISP_ABORT_RETRY, &ha->dpc_flags);
 
-			if (ha->eft) {
-				memset(ha->eft, 0, EFT_SIZE);
-				rval = qla2x00_enable_eft_trace(ha,
-				    ha->eft_dma, EFT_NUM_BUFFERS);
-				if (rval) {
-					qla_printk(KERN_WARNING, ha,
-					    "Unable to reinitialize EFT "
-					    "(%d).\n", rval);
-				}
-			}
-
 			if (ha->fce) {
 				ha->flags.fce_enabled = 1;
 				memset(ha->fce, 0,
@@ -3308,6 +3314,17 @@ qla2x00_abort_isp(scsi_qla_host_t *ha)
 					ha->flags.fce_enabled = 0;
 				}
 			}
+
+			if (ha->eft) {
+				memset(ha->eft, 0, EFT_SIZE);
+				rval = qla2x00_enable_eft_trace(ha,
+				    ha->eft_dma, EFT_NUM_BUFFERS);
+				if (rval) {
+					qla_printk(KERN_WARNING, ha,
+					    "Unable to reinitialize EFT "
+					    "(%d).\n", rval);
+				}
+			}
 		} else {	/* failed the ISP abort */
 			ha->flags.online = 1;
 			if (test_bit(ISP_ABORT_RETRY, &ha->dpc_flags)) {
@@ -4026,8 +4043,8 @@ qla2x00_try_to_stop_firmware(scsi_qla_host_t *ha)
 	ret = qla2x00_stop_firmware(ha);
 	for (retries = 5; ret != QLA_SUCCESS && ret != QLA_FUNCTION_TIMEOUT &&
 	    retries ; retries--) {
-		qla2x00_reset_chip(ha);
-		if (qla2x00_chip_diag(ha) != QLA_SUCCESS)
+		ha->isp_ops->reset_chip(ha);
+		if (ha->isp_ops->chip_diag(ha) != QLA_SUCCESS)
 			continue;
 		if (qla2x00_setup_chip(ha) != QLA_SUCCESS)
 			continue;
@@ -4049,7 +4066,7 @@ qla24xx_configure_vhba(scsi_qla_host_t *ha)
 	rval = qla2x00_fw_ready(ha->parent);
 	if (rval == QLA_SUCCESS) {
 		clear_bit(RESET_MARKER_NEEDED, &ha->dpc_flags);
-		qla2x00_marker(ha->parent, 0, 0, MK_SYNC_ALL);
+		qla2x00_marker(ha, 0, 0, MK_SYNC_ALL);
 	}
 
 	ha->flags.management_server_logged_in = 0;
diff --git a/drivers/scsi/qla2xxx/qla_iocb.c b/drivers/scsi/qla2xxx/qla_iocb.c
index 5489d5024673..d57669aa4615 100644
--- a/drivers/scsi/qla2xxx/qla_iocb.c
+++ b/drivers/scsi/qla2xxx/qla_iocb.c
@@ -454,10 +454,11 @@ qla2x00_marker(scsi_qla_host_t *ha, uint16_t loop_id, uint16_t lun,
 {
 	int ret;
 	unsigned long flags = 0;
+	scsi_qla_host_t *pha = to_qla_parent(ha);
 
-	spin_lock_irqsave(&ha->hardware_lock, flags);
+	spin_lock_irqsave(&pha->hardware_lock, flags);
 	ret = __qla2x00_marker(ha, loop_id, lun, type);
-	spin_unlock_irqrestore(&ha->hardware_lock, flags);
+	spin_unlock_irqrestore(&pha->hardware_lock, flags);
 
 	return (ret);
 }
@@ -672,7 +673,7 @@ qla24xx_start_scsi(srb_t *sp)
 {
 	int		ret, nseg;
 	unsigned long   flags;
-	scsi_qla_host_t	*ha;
+	scsi_qla_host_t	*ha, *pha;
 	struct scsi_cmnd *cmd;
 	uint32_t	*clr_ptr;
 	uint32_t        index;
@@ -686,6 +687,7 @@ qla24xx_start_scsi(srb_t *sp)
 	/* Setup device pointers. */
 	ret = 0;
 	ha = sp->ha;
+	pha = to_qla_parent(ha);
 	reg = &ha->iobase->isp24;
 	cmd = sp->cmd;
 	/* So we know we haven't pci_map'ed anything yet */
@@ -700,7 +702,7 @@ qla24xx_start_scsi(srb_t *sp)
 	}
 
 	/* Acquire ring specific lock */
-	spin_lock_irqsave(&ha->hardware_lock, flags);
+	spin_lock_irqsave(&pha->hardware_lock, flags);
 
 	/* Check for room in outstanding command list. */
 	handle = ha->current_outstanding_cmd;
@@ -795,14 +797,14 @@ qla24xx_start_scsi(srb_t *sp)
 	    ha->response_ring_ptr->signature != RESPONSE_PROCESSED)
 		qla24xx_process_response_queue(ha);
 
-	spin_unlock_irqrestore(&ha->hardware_lock, flags);
+	spin_unlock_irqrestore(&pha->hardware_lock, flags);
 	return QLA_SUCCESS;
 
 queuing_error:
 	if (tot_dsds)
 		scsi_dma_unmap(cmd);
 
-	spin_unlock_irqrestore(&ha->hardware_lock, flags);
+	spin_unlock_irqrestore(&pha->hardware_lock, flags);
 
 	return QLA_FUNCTION_FAILED;
 }
diff --git a/drivers/scsi/qla2xxx/qla_isr.c b/drivers/scsi/qla2xxx/qla_isr.c
index ec63b79f900a..45a3b93eed57 100644
--- a/drivers/scsi/qla2xxx/qla_isr.c
+++ b/drivers/scsi/qla2xxx/qla_isr.c
@@ -542,10 +542,6 @@ qla2x00_async_event(scsi_qla_host_t *ha, uint16_t *mb)
 		break;
 
 	case MBA_PORT_UPDATE:		/* Port database update */
-		/* Only handle SCNs for our Vport index. */
-		if (ha->parent && ha->vp_idx != (mb[3] & 0xff))
-			break;
-
 		/*
 		 * If PORT UPDATE is global (recieved LIP_OCCURED/LIP_RESET
 		 * event etc. earlier indicating loop is down) then process
@@ -883,11 +879,12 @@ qla2x00_handle_sense(srb_t *sp, uint8_t *sense_data, uint32_t sense_len)
 	sp->request_sense_ptr += sense_len;
 	sp->request_sense_length -= sense_len;
 	if (sp->request_sense_length != 0)
-		sp->ha->status_srb = sp;
+		sp->fcport->ha->status_srb = sp;
 
 	DEBUG5(printk("%s(): Check condition Sense data, scsi(%ld:%d:%d:%d) "
-	    "cmd=%p pid=%ld\n", __func__, sp->ha->host_no, cp->device->channel,
-	    cp->device->id, cp->device->lun, cp, cp->serial_number));
+	    "cmd=%p pid=%ld\n", __func__, sp->fcport->ha->host_no,
+	    cp->device->channel, cp->device->id, cp->device->lun, cp,
+	    cp->serial_number));
 	if (sense_len)
 		DEBUG5(qla2x00_dump_buffer(cp->sense_buffer,
 		    CMD_ACTUAL_SNSLEN(cp)));
@@ -1188,9 +1185,8 @@ qla2x00_status_entry(scsi_qla_host_t *ha, void *pkt)
 		    atomic_read(&fcport->state)));
 
 		cp->result = DID_BUS_BUSY << 16;
-		if (atomic_read(&fcport->state) == FCS_ONLINE) {
-			qla2x00_mark_device_lost(ha, fcport, 1, 1);
-		}
+		if (atomic_read(&fcport->state) == FCS_ONLINE)
+			qla2x00_mark_device_lost(fcport->ha, fcport, 1, 1);
 		break;
 
 	case CS_RESET:
@@ -1233,7 +1229,7 @@ qla2x00_status_entry(scsi_qla_host_t *ha, void *pkt)
 
 		/* Check to see if logout occurred. */
 		if ((le16_to_cpu(sts->status_flags) & SF_LOGOUT_SENT))
-			qla2x00_mark_device_lost(ha, fcport, 1, 1);
+			qla2x00_mark_device_lost(fcport->ha, fcport, 1, 1);
 		break;
 
 	default:
diff --git a/drivers/scsi/qla2xxx/qla_mbx.c b/drivers/scsi/qla2xxx/qla_mbx.c
index 250d2f604397..813bc7784c0a 100644
--- a/drivers/scsi/qla2xxx/qla_mbx.c
+++ b/drivers/scsi/qla2xxx/qla_mbx.c
@@ -918,6 +918,8 @@ qla2x00_get_adapter_id(scsi_qla_host_t *ha, uint16_t *id, uint8_t *al_pa,
 	rval = qla2x00_mailbox_command(ha, mcp);
 	if (mcp->mb[0] == MBS_COMMAND_ERROR)
 		rval = QLA_COMMAND_ERROR;
+	else if (mcp->mb[0] == MBS_INVALID_COMMAND)
+		rval = QLA_INVALID_COMMAND;
 
 	/* Return data. */
 	*id = mcp->mb[1];
@@ -2161,17 +2163,18 @@ qla24xx_abort_command(scsi_qla_host_t *ha, srb_t *sp)
 	struct abort_entry_24xx *abt;
 	dma_addr_t	abt_dma;
 	uint32_t	handle;
+	scsi_qla_host_t *pha = to_qla_parent(ha);
 
 	DEBUG11(printk("%s(%ld): entered.\n", __func__, ha->host_no));
 
 	fcport = sp->fcport;
 
-	spin_lock_irqsave(&ha->hardware_lock, flags);
+	spin_lock_irqsave(&pha->hardware_lock, flags);
 	for (handle = 1; handle < MAX_OUTSTANDING_COMMANDS; handle++) {
-		if (ha->outstanding_cmds[handle] == sp)
+		if (pha->outstanding_cmds[handle] == sp)
 			break;
 	}
-	spin_unlock_irqrestore(&ha->hardware_lock, flags);
+	spin_unlock_irqrestore(&pha->hardware_lock, flags);
 	if (handle == MAX_OUTSTANDING_COMMANDS) {
 		/* Command not found. */
 		return QLA_FUNCTION_FAILED;
@@ -2683,7 +2686,7 @@ qla24xx_report_id_acquisition(scsi_qla_host_t *ha,
 		set_bit(VP_IDX_ACQUIRED, &vha->vp_flags);
 		set_bit(VP_DPC_NEEDED, &ha->dpc_flags);
 
-		wake_up_process(ha->dpc_thread);
+		qla2xxx_wake_dpc(ha);
 	}
 }
 
diff --git a/drivers/scsi/qla2xxx/qla_mid.c b/drivers/scsi/qla2xxx/qla_mid.c
index 62a3ad6e8ecb..93560cd72784 100644
--- a/drivers/scsi/qla2xxx/qla_mid.c
+++ b/drivers/scsi/qla2xxx/qla_mid.c
@@ -6,7 +6,6 @@
  */
 #include "qla_def.h"
 
-#include <linux/version.h>
 #include <linux/moduleparam.h>
 #include <linux/vmalloc.h>
 #include <linux/smp_lock.h>
@@ -43,6 +42,7 @@ qla24xx_allocate_vp_id(scsi_qla_host_t *vha)
 
 	set_bit(vp_id, ha->vp_idx_map);
 	ha->num_vhosts++;
+	ha->cur_vport_count++;
 	vha->vp_idx = vp_id;
 	list_add_tail(&vha->vp_list, &ha->vp_list);
 	mutex_unlock(&ha->vport_lock);
@@ -58,6 +58,7 @@ qla24xx_deallocate_vp_id(scsi_qla_host_t *vha)
 	mutex_lock(&ha->vport_lock);
 	vp_id = vha->vp_idx;
 	ha->num_vhosts--;
+	ha->cur_vport_count--;
 	clear_bit(vp_id, ha->vp_idx_map);
 	list_del(&vha->vp_list);
 	mutex_unlock(&ha->vport_lock);
@@ -103,8 +104,8 @@ qla2x00_mark_vp_devices_dead(scsi_qla_host_t *vha)
 		    "loop_id=0x%04x :%x\n",
 		    vha->host_no, fcport->loop_id, fcport->vp_idx));
 
-		atomic_set(&fcport->state, FCS_DEVICE_DEAD);
 		qla2x00_mark_device_lost(vha, fcport, 0, 0);
+		atomic_set(&fcport->state, FCS_UNCONFIGURED);
 	}
 }
 
@@ -276,7 +277,8 @@ qla2x00_do_dpc_vp(scsi_qla_host_t *vha)
 		clear_bit(RESET_ACTIVE, &vha->dpc_flags);
 	}
 
-	if (test_and_clear_bit(LOOP_RESYNC_NEEDED, &vha->dpc_flags)) {
+	if (atomic_read(&vha->vp_state) == VP_ACTIVE &&
+	    test_and_clear_bit(LOOP_RESYNC_NEEDED, &vha->dpc_flags)) {
 		if (!(test_and_set_bit(LOOP_RESYNC_ACTIVE, &vha->dpc_flags))) {
 			qla2x00_loop_resync(vha);
 			clear_bit(LOOP_RESYNC_ACTIVE, &vha->dpc_flags);
@@ -390,7 +392,6 @@ qla24xx_create_vhost(struct fc_vport *fc_vport)
 	vha->parent = ha;
 	vha->fc_vport = fc_vport;
 	vha->device_flags = 0;
-	vha->instance = num_hosts;
 	vha->vp_idx = qla24xx_allocate_vp_id(vha);
 	if (vha->vp_idx > ha->max_npiv_vports) {
 		DEBUG15(printk("scsi(%ld): Couldn't allocate vp_id.\n",
@@ -428,7 +429,7 @@ qla24xx_create_vhost(struct fc_vport *fc_vport)
 	host->max_cmd_len = MAX_CMDSZ;
 	host->max_channel = MAX_BUSES - 1;
 	host->max_lun = MAX_LUNS;
-	host->unique_id = vha->instance;
+	host->unique_id = host->host_no;
 	host->max_id = MAX_TARGETS_2200;
 	host->transportt = qla2xxx_transport_vport_template;
 
@@ -436,12 +437,6 @@ qla24xx_create_vhost(struct fc_vport *fc_vport)
 	    vha->host_no, vha));
 
 	vha->flags.init_done = 1;
-	num_hosts++;
-
-	mutex_lock(&ha->vport_lock);
-	set_bit(vha->vp_idx, ha->vp_idx_map);
-	ha->cur_vport_count++;
-	mutex_unlock(&ha->vport_lock);
 
 	return vha;
 
diff --git a/drivers/scsi/qla2xxx/qla_os.c b/drivers/scsi/qla2xxx/qla_os.c
index 48eaa3bb5433..26afe44265c7 100644
--- a/drivers/scsi/qla2xxx/qla_os.c
+++ b/drivers/scsi/qla2xxx/qla_os.c
@@ -27,7 +27,6 @@ char qla2x00_version_str[40];
  */
 static struct kmem_cache *srb_cachep;
 
-int num_hosts;
 int ql2xlogintimeout = 20;
 module_param(ql2xlogintimeout, int, S_IRUGO|S_IRUSR);
 MODULE_PARM_DESC(ql2xlogintimeout,
@@ -87,6 +86,13 @@ MODULE_PARM_DESC(ql2xqfullrampup,
 		"depth for a device after a queue-full condition has been "
 		"detected.  Default is 120 seconds.");
 
+int ql2xiidmaenable=1;
+module_param(ql2xiidmaenable, int, S_IRUGO|S_IRUSR);
+MODULE_PARM_DESC(ql2xiidmaenable,
+		"Enables iIDMA settings "
+		"Default is 1 - perform iIDMA. 0 - no iIDMA.");
+
+
 /*
  * SCSI host template entry points
  */
@@ -388,7 +394,7 @@ qla2x00_queuecommand(struct scsi_cmnd *cmd, void (*done)(struct scsi_cmnd *))
 	}
 
 	/* Close window on fcport/rport state-transitioning. */
-	if (!*(fc_port_t **)rport->dd_data) {
+	if (fcport->drport) {
 		cmd->result = DID_IMM_RETRY << 16;
 		goto qc_fail_command;
 	}
@@ -443,7 +449,7 @@ qla24xx_queuecommand(struct scsi_cmnd *cmd, void (*done)(struct scsi_cmnd *))
 	int rval;
 	scsi_qla_host_t *pha = to_qla_parent(ha);
 
-	if (unlikely(pci_channel_offline(ha->pdev))) {
+	if (unlikely(pci_channel_offline(pha->pdev))) {
 		cmd->result = DID_REQUEUE << 16;
 		goto qc24_fail_command;
 	}
@@ -455,7 +461,7 @@ qla24xx_queuecommand(struct scsi_cmnd *cmd, void (*done)(struct scsi_cmnd *))
 	}
 
 	/* Close window on fcport/rport state-transitioning. */
-	if (!*(fc_port_t **)rport->dd_data) {
+	if (fcport->drport) {
 		cmd->result = DID_IMM_RETRY << 16;
 		goto qc24_fail_command;
 	}
@@ -617,6 +623,40 @@ qla2x00_wait_for_loop_ready(scsi_qla_host_t *ha)
 	return (return_status);
 }
 
+void
+qla2x00_abort_fcport_cmds(fc_port_t *fcport)
+{
+	int cnt;
+	unsigned long flags;
+	srb_t *sp;
+	scsi_qla_host_t *ha = fcport->ha;
+	scsi_qla_host_t *pha = to_qla_parent(ha);
+
+	spin_lock_irqsave(&pha->hardware_lock, flags);
+	for (cnt = 1; cnt < MAX_OUTSTANDING_COMMANDS; cnt++) {
+		sp = pha->outstanding_cmds[cnt];
+		if (!sp)
+			continue;
+		if (sp->fcport != fcport)
+			continue;
+
+		spin_unlock_irqrestore(&pha->hardware_lock, flags);
+		if (ha->isp_ops->abort_command(ha, sp)) {
+			DEBUG2(qla_printk(KERN_WARNING, ha,
+			    "Abort failed --  %lx\n", sp->cmd->serial_number));
+		} else {
+			if (qla2x00_eh_wait_on_command(ha, sp->cmd) !=
+			    QLA_SUCCESS)
+				DEBUG2(qla_printk(KERN_WARNING, ha,
+				    "Abort failed while waiting --  %lx\n",
+				    sp->cmd->serial_number));
+
+		}
+		spin_lock_irqsave(&pha->hardware_lock, flags);
+	}
+	spin_unlock_irqrestore(&pha->hardware_lock, flags);
+}
+
 static void
 qla2x00_block_error_handler(struct scsi_cmnd *cmnd)
 {
@@ -740,7 +780,8 @@ qla2x00_eh_wait_for_pending_commands(scsi_qla_host_t *ha, unsigned int t,
 		sp = pha->outstanding_cmds[cnt];
 		if (!sp)
 			continue;
-		if (ha->vp_idx != sp->ha->vp_idx)
+
+		if (ha->vp_idx != sp->fcport->ha->vp_idx)
 			continue;
 		match = 0;
 		switch (type) {
@@ -1040,9 +1081,7 @@ qla2x00_abort_all_cmds(scsi_qla_host_t *ha, int res)
 		sp = ha->outstanding_cmds[cnt];
 		if (sp) {
 			ha->outstanding_cmds[cnt] = NULL;
-			sp->flags = 0;
 			sp->cmd->result = res;
-			sp->cmd->host_scribble = (unsigned char *)NULL;
 			qla2x00_sp_compl(ha, sp);
 		}
 	}
@@ -1073,7 +1112,7 @@ qla2xxx_slave_configure(struct scsi_device *sdev)
 	else
 		scsi_deactivate_tcq(sdev, ha->max_q_depth);
 
-	rport->dev_loss_tmo = ha->port_down_retry_count + 5;
+	rport->dev_loss_tmo = ha->port_down_retry_count;
 
 	return 0;
 }
@@ -1629,9 +1668,6 @@ qla2x00_probe_one(struct pci_dev *pdev, const struct pci_device_id *id)
 	}
 	host->can_queue = ha->request_q_length + 128;
 
-	/* load the F/W, read paramaters, and init the H/W */
-	ha->instance = num_hosts;
-
 	mutex_init(&ha->vport_lock);
 	init_completion(&ha->mbx_cmd_comp);
 	complete(&ha->mbx_cmd_comp);
@@ -1679,7 +1715,7 @@ qla2x00_probe_one(struct pci_dev *pdev, const struct pci_device_id *id)
 
 	host->this_id = 255;
 	host->cmd_per_lun = 3;
-	host->unique_id = ha->instance;
+	host->unique_id = host->host_no;
 	host->max_cmd_len = MAX_CMDSZ;
 	host->max_channel = MAX_BUSES - 1;
 	host->max_lun = MAX_LUNS;
@@ -1700,8 +1736,6 @@ qla2x00_probe_one(struct pci_dev *pdev, const struct pci_device_id *id)
 	ha->flags.init_done = 1;
 	ha->flags.online = 1;
 
-	num_hosts++;
-
 	ret = scsi_add_host(host, &pdev->dev);
 	if (ret)
 		goto probe_failed;
@@ -1741,10 +1775,15 @@ probe_out:
 static void
 qla2x00_remove_one(struct pci_dev *pdev)
 {
-	scsi_qla_host_t *ha;
+	scsi_qla_host_t *ha, *vha, *temp;
 
 	ha = pci_get_drvdata(pdev);
 
+	list_for_each_entry_safe(vha, temp, &ha->vp_list, vp_list)
+		fc_vport_terminate(vha->fc_vport);
+
+	set_bit(UNLOADING, &ha->dpc_flags);
+
 	qla2x00_dfs_remove(ha);
 
 	qla84xx_put_chip(ha);
@@ -1813,27 +1852,21 @@ static inline void
 qla2x00_schedule_rport_del(struct scsi_qla_host *ha, fc_port_t *fcport,
     int defer)
 {
-	unsigned long flags;
 	struct fc_rport *rport;
+	scsi_qla_host_t *pha = to_qla_parent(ha);
 
 	if (!fcport->rport)
 		return;
 
 	rport = fcport->rport;
 	if (defer) {
-		spin_lock_irqsave(&fcport->rport_lock, flags);
+		spin_lock_irq(ha->host->host_lock);
 		fcport->drport = rport;
-		fcport->rport = NULL;
-		*(fc_port_t **)rport->dd_data = NULL;
-		spin_unlock_irqrestore(&fcport->rport_lock, flags);
-		set_bit(FCPORT_UPDATE_NEEDED, &ha->dpc_flags);
-	} else {
-		spin_lock_irqsave(&fcport->rport_lock, flags);
-		fcport->rport = NULL;
-		*(fc_port_t **)rport->dd_data = NULL;
-		spin_unlock_irqrestore(&fcport->rport_lock, flags);
+		spin_unlock_irq(ha->host->host_lock);
+		set_bit(FCPORT_UPDATE_NEEDED, &pha->dpc_flags);
+		qla2xxx_wake_dpc(pha);
+	} else
 		fc_remote_port_delete(rport);
-	}
 }
 
 /*
@@ -1903,7 +1936,7 @@ qla2x00_mark_all_devices_lost(scsi_qla_host_t *ha, int defer)
 	scsi_qla_host_t *pha = to_qla_parent(ha);
 
 	list_for_each_entry(fcport, &pha->fcports, list) {
-		if (ha->vp_idx != 0 && ha->vp_idx != fcport->vp_idx)
+		if (ha->vp_idx != fcport->vp_idx)
 			continue;
 		/*
 		 * No point in marking the device as lost, if the device is
@@ -1911,17 +1944,10 @@ qla2x00_mark_all_devices_lost(scsi_qla_host_t *ha, int defer)
 		 */
 		if (atomic_read(&fcport->state) == FCS_DEVICE_DEAD)
 			continue;
-		if (atomic_read(&fcport->state) == FCS_ONLINE) {
-			if (defer)
-				qla2x00_schedule_rport_del(ha, fcport, defer);
-			else if (ha->vp_idx == fcport->vp_idx)
-				qla2x00_schedule_rport_del(ha, fcport, defer);
-		}
+		if (atomic_read(&fcport->state) == FCS_ONLINE)
+			qla2x00_schedule_rport_del(ha, fcport, defer);
 		atomic_set(&fcport->state, FCS_DEVICE_LOST);
 	}
-
-	if (defer)
-		qla2xxx_wake_dpc(ha);
 }
 
 /*
@@ -2156,7 +2182,7 @@ qla2x00_alloc_work(struct scsi_qla_host *ha, enum qla_work_type type,
 static int
 qla2x00_post_work(struct scsi_qla_host *ha, struct qla_work_evt *e, int locked)
 {
-	unsigned long flags;
+	unsigned long uninitialized_var(flags);
 	scsi_qla_host_t *pha = to_qla_parent(ha);
 
 	if (!locked)
@@ -2313,8 +2339,10 @@ qla2x00_do_dpc(void *data)
 			    ha->host_no));
 		}
 
-		if (test_and_clear_bit(FCPORT_UPDATE_NEEDED, &ha->dpc_flags))
+		if (test_bit(FCPORT_UPDATE_NEEDED, &ha->dpc_flags)) {
 			qla2x00_update_fcports(ha);
+			clear_bit(FCPORT_UPDATE_NEEDED, &ha->dpc_flags);
+		}
 
 		if (test_and_clear_bit(RESET_MARKER_NEEDED, &ha->dpc_flags) &&
 		    (!(test_and_set_bit(RESET_ACTIVE, &ha->dpc_flags)))) {
@@ -2427,8 +2455,10 @@ qla2x00_do_dpc(void *data)
 void
 qla2xxx_wake_dpc(scsi_qla_host_t *ha)
 {
-	if (ha->dpc_thread)
-		wake_up_process(ha->dpc_thread);
+	struct task_struct *t = ha->dpc_thread;
+
+	if (!test_bit(UNLOADING, &ha->dpc_flags) && t)
+		wake_up_process(t);
 }
 
 /*
diff --git a/drivers/scsi/qla2xxx/qla_sup.c b/drivers/scsi/qla2xxx/qla_sup.c
index 1728ab3ccb20..1bca74474935 100644
--- a/drivers/scsi/qla2xxx/qla_sup.c
+++ b/drivers/scsi/qla2xxx/qla_sup.c
@@ -869,11 +869,9 @@ qla24xx_write_nvram_data(scsi_qla_host_t *ha, uint8_t *buf, uint32_t naddr,
 	uint32_t i;
 	uint32_t *dwptr;
 	struct device_reg_24xx __iomem *reg = &ha->iobase->isp24;
-	unsigned long flags;
 
 	ret = QLA_SUCCESS;
 
-	spin_lock_irqsave(&ha->hardware_lock, flags);
 	/* Enable flash write. */
 	WRT_REG_DWORD(&reg->ctrl_status,
 	    RD_REG_DWORD(&reg->ctrl_status) | CSRX_FLASH_ENABLE);
@@ -907,7 +905,6 @@ qla24xx_write_nvram_data(scsi_qla_host_t *ha, uint8_t *buf, uint32_t naddr,
 	WRT_REG_DWORD(&reg->ctrl_status,
 	    RD_REG_DWORD(&reg->ctrl_status) & ~CSRX_FLASH_ENABLE);
 	RD_REG_DWORD(&reg->ctrl_status);	/* PCI Posting. */
-	spin_unlock_irqrestore(&ha->hardware_lock, flags);
 
 	return ret;
 }
@@ -2306,6 +2303,51 @@ qla24xx_get_flash_version(scsi_qla_host_t *ha, void *mbuf)
 }
 
 static int
+qla2xxx_is_vpd_valid(uint8_t *pos, uint8_t *end)
+{
+	if (pos >= end || *pos != 0x82)
+		return 0;
+
+	pos += 3 + pos[1];
+	if (pos >= end || *pos != 0x90)
+		return 0;
+
+	pos += 3 + pos[1];
+	if (pos >= end || *pos != 0x78)
+		return 0;
+
+	return 1;
+}
+
+int
+qla2xxx_get_vpd_field(scsi_qla_host_t *ha, char *key, char *str, size_t size)
+{
+	uint8_t *pos = ha->vpd;
+	uint8_t *end = pos + ha->vpd_size;
+	int len = 0;
+
+	if (!IS_FWI2_CAPABLE(ha) || !qla2xxx_is_vpd_valid(pos, end))
+		return 0;
+
+	while (pos < end && *pos != 0x78) {
+		len = (*pos == 0x82) ? pos[1] : pos[2];
+
+		if (!strncmp(pos, key, strlen(key)))
+			break;
+
+		if (*pos != 0x90 && *pos != 0x91)
+			pos += len;
+
+		pos += 3;
+	}
+
+	if (pos < end - len && *pos != 0x78)
+		return snprintf(str, size, "%.*s", len, pos + 3);
+
+	return 0;
+}
+
+static int
 qla2xxx_hw_event_store(scsi_qla_host_t *ha, uint32_t *fdata)
 {
 	uint32_t d[2], faddr;
diff --git a/drivers/scsi/qla2xxx/qla_version.h b/drivers/scsi/qla2xxx/qla_version.h
index d058c8862b35..4160e4caa7b9 100644
--- a/drivers/scsi/qla2xxx/qla_version.h
+++ b/drivers/scsi/qla2xxx/qla_version.h
@@ -7,7 +7,7 @@
 /*
  * Driver version
  */
-#define QLA2XXX_VERSION      "8.02.01-k4"
+#define QLA2XXX_VERSION      "8.02.01-k7"
 
 #define QLA_DRIVER_MAJOR_VER	8
 #define QLA_DRIVER_MINOR_VER	2
diff --git a/drivers/scsi/qla4xxx/ql4_os.c b/drivers/scsi/qla4xxx/ql4_os.c
index 5822dd595826..88bebb13bc52 100644
--- a/drivers/scsi/qla4xxx/ql4_os.c
+++ b/drivers/scsi/qla4xxx/ql4_os.c
@@ -46,6 +46,8 @@ MODULE_PARM_DESC(ql4xextended_error_logging,
 
 int ql4_mod_unload = 0;
 
+#define QL4_DEF_QDEPTH 32
+
 /*
  * SCSI host template entry points
  */
@@ -1387,7 +1389,7 @@ static int qla4xxx_slave_alloc(struct scsi_device *sdev)
 
 	sdev->hostdata = ddb;
 	sdev->tagged_supported = 1;
-	scsi_activate_tcq(sdev, sdev->host->can_queue);
+	scsi_activate_tcq(sdev, QL4_DEF_QDEPTH);
 	return 0;
 }
 
diff --git a/drivers/scsi/scsi.c b/drivers/scsi/scsi.c
index 36c92f961e15..ee6be596503d 100644
--- a/drivers/scsi/scsi.c
+++ b/drivers/scsi/scsi.c
@@ -197,11 +197,43 @@ static void
 scsi_pool_free_command(struct scsi_host_cmd_pool *pool,
 			 struct scsi_cmnd *cmd)
 {
+	if (cmd->prot_sdb)
+		kmem_cache_free(scsi_sdb_cache, cmd->prot_sdb);
+
 	kmem_cache_free(pool->sense_slab, cmd->sense_buffer);
 	kmem_cache_free(pool->cmd_slab, cmd);
 }
 
 /**
+ * scsi_host_alloc_command - internal function to allocate command
+ * @shost:	SCSI host whose pool to allocate from
+ * @gfp_mask:	mask for the allocation
+ *
+ * Returns a fully allocated command with sense buffer and protection
+ * data buffer (where applicable) or NULL on failure
+ */
+static struct scsi_cmnd *
+scsi_host_alloc_command(struct Scsi_Host *shost, gfp_t gfp_mask)
+{
+	struct scsi_cmnd *cmd;
+
+	cmd = scsi_pool_alloc_command(shost->cmd_pool, gfp_mask);
+	if (!cmd)
+		return NULL;
+
+	if (scsi_host_get_prot(shost) >= SHOST_DIX_TYPE0_PROTECTION) {
+		cmd->prot_sdb = kmem_cache_zalloc(scsi_sdb_cache, gfp_mask);
+
+		if (!cmd->prot_sdb) {
+			scsi_pool_free_command(shost->cmd_pool, cmd);
+			return NULL;
+		}
+	}
+
+	return cmd;
+}
+
+/**
  * __scsi_get_command - Allocate a struct scsi_cmnd
  * @shost: host to transmit command
  * @gfp_mask: allocation mask
@@ -214,7 +246,7 @@ struct scsi_cmnd *__scsi_get_command(struct Scsi_Host *shost, gfp_t gfp_mask)
 	struct scsi_cmnd *cmd;
 	unsigned char *buf;
 
-	cmd = scsi_pool_alloc_command(shost->cmd_pool, gfp_mask);
+	cmd = scsi_host_alloc_command(shost, gfp_mask);
 
 	if (unlikely(!cmd)) {
 		unsigned long flags;
@@ -457,7 +489,7 @@ int scsi_setup_command_freelist(struct Scsi_Host *shost)
 	/*
 	 * Get one backup command for this host.
 	 */
-	cmd = scsi_pool_alloc_command(shost->cmd_pool, gfp_mask);
+	cmd = scsi_host_alloc_command(shost, gfp_mask);
 	if (!cmd) {
 		scsi_put_host_cmd_pool(gfp_mask);
 		shost->cmd_pool = NULL;
@@ -902,11 +934,20 @@ void scsi_adjust_queue_depth(struct scsi_device *sdev, int tagged, int tags)
 
 	spin_lock_irqsave(sdev->request_queue->queue_lock, flags);
 
-	/* Check to see if the queue is managed by the block layer.
-	 * If it is, and we fail to adjust the depth, exit. */
-	if (blk_queue_tagged(sdev->request_queue) &&
-	    blk_queue_resize_tags(sdev->request_queue, tags) != 0)
-		goto out;
+	/*
+	 * Check to see if the queue is managed by the block layer.
+	 * If it is, and we fail to adjust the depth, exit.
+	 *
+	 * Do not resize the tag map if it is a host wide share bqt,
+	 * because the size should be the hosts's can_queue. If there
+	 * is more IO than the LLD's can_queue (so there are not enuogh
+	 * tags) request_fn's host queue ready check will handle it.
+	 */
+	if (!sdev->host->bqt) {
+		if (blk_queue_tagged(sdev->request_queue) &&
+		    blk_queue_resize_tags(sdev->request_queue, tags) != 0)
+			goto out;
+	}
 
 	sdev->queue_depth = tags;
 	switch (tagged) {
diff --git a/drivers/scsi/scsi_debug.c b/drivers/scsi/scsi_debug.c
index 01d11a01ffbf..27c633f55794 100644
--- a/drivers/scsi/scsi_debug.c
+++ b/drivers/scsi/scsi_debug.c
@@ -1753,7 +1753,7 @@ static struct sdebug_dev_info * devInfoReg(struct scsi_device * sdev)
 		open_devip = sdebug_device_create(sdbg_host, GFP_ATOMIC);
 		if (!open_devip) {
 			printk(KERN_ERR "%s: out of memory at line %d\n",
-				__FUNCTION__, __LINE__);
+				__func__, __LINE__);
 			return NULL;
 		}
 	}
@@ -2656,7 +2656,7 @@ static int sdebug_add_adapter(void)
         sdbg_host = kzalloc(sizeof(*sdbg_host),GFP_KERNEL);
         if (NULL == sdbg_host) {
                 printk(KERN_ERR "%s: out of memory at line %d\n",
-                       __FUNCTION__, __LINE__);
+                       __func__, __LINE__);
                 return -ENOMEM;
         }
 
@@ -2667,7 +2667,7 @@ static int sdebug_add_adapter(void)
 		sdbg_devinfo = sdebug_device_create(sdbg_host, GFP_KERNEL);
 		if (!sdbg_devinfo) {
                         printk(KERN_ERR "%s: out of memory at line %d\n",
-                               __FUNCTION__, __LINE__);
+                               __func__, __LINE__);
                         error = -ENOMEM;
 			goto clean;
                 }
@@ -2987,7 +2987,7 @@ static int sdebug_driver_probe(struct device * dev)
 
         hpnt = scsi_host_alloc(&sdebug_driver_template, sizeof(sdbg_host));
         if (NULL == hpnt) {
-                printk(KERN_ERR "%s: scsi_register failed\n", __FUNCTION__);
+                printk(KERN_ERR "%s: scsi_register failed\n", __func__);
                 error = -ENODEV;
 		return error;
         }
@@ -3002,7 +3002,7 @@ static int sdebug_driver_probe(struct device * dev)
 
         error = scsi_add_host(hpnt, &sdbg_host->dev);
         if (error) {
-                printk(KERN_ERR "%s: scsi_add_host failed\n", __FUNCTION__);
+                printk(KERN_ERR "%s: scsi_add_host failed\n", __func__);
                 error = -ENODEV;
 		scsi_host_put(hpnt);
         } else
@@ -3021,7 +3021,7 @@ static int sdebug_driver_remove(struct device * dev)
 
 	if (!sdbg_host) {
 		printk(KERN_ERR "%s: Unable to locate host info\n",
-		       __FUNCTION__);
+		       __func__);
 		return -ENODEV;
 	}
 
diff --git a/drivers/scsi/scsi_devinfo.c b/drivers/scsi/scsi_devinfo.c
index a235802f2981..4969e4ec75ea 100644
--- a/drivers/scsi/scsi_devinfo.c
+++ b/drivers/scsi/scsi_devinfo.c
@@ -272,7 +272,7 @@ static void scsi_strcpy_devinfo(char *name, char *to, size_t to_length,
 	}
 	if (from_length > to_length)
 		 printk(KERN_WARNING "%s: %s string '%s' is too long\n",
-			__FUNCTION__, name, from);
+			__func__, name, from);
 }
 
 /**
@@ -298,7 +298,7 @@ static int scsi_dev_info_list_add(int compatible, char *vendor, char *model,
 
 	devinfo = kmalloc(sizeof(*devinfo), GFP_KERNEL);
 	if (!devinfo) {
-		printk(KERN_ERR "%s: no memory\n", __FUNCTION__);
+		printk(KERN_ERR "%s: no memory\n", __func__);
 		return -ENOMEM;
 	}
 
@@ -363,7 +363,7 @@ static int scsi_dev_info_list_add_str(char *dev_list)
 			strflags = strsep(&next, next_check);
 		if (!model || !strflags) {
 			printk(KERN_ERR "%s: bad dev info string '%s' '%s'"
-			       " '%s'\n", __FUNCTION__, vendor, model,
+			       " '%s'\n", __func__, vendor, model,
 			       strflags);
 			res = -EINVAL;
 		} else
diff --git a/drivers/scsi/scsi_error.c b/drivers/scsi/scsi_error.c
index 006a95916f72..880051c89bde 100644
--- a/drivers/scsi/scsi_error.c
+++ b/drivers/scsi/scsi_error.c
@@ -139,7 +139,7 @@ void scsi_add_timer(struct scsi_cmnd *scmd, int timeout,
 	scmd->eh_timeout.function = (void (*)(unsigned long)) complete;
 
 	SCSI_LOG_ERROR_RECOVERY(5, printk("%s: scmd: %p, time:"
-					  " %d, (%p)\n", __FUNCTION__,
+					  " %d, (%p)\n", __func__,
 					  scmd, timeout, complete));
 
 	add_timer(&scmd->eh_timeout);
@@ -163,7 +163,7 @@ int scsi_delete_timer(struct scsi_cmnd *scmd)
 	rtn = del_timer(&scmd->eh_timeout);
 
 	SCSI_LOG_ERROR_RECOVERY(5, printk("%s: scmd: %p,"
-					 " rtn: %d\n", __FUNCTION__,
+					 " rtn: %d\n", __func__,
 					 scmd, rtn));
 
 	scmd->eh_timeout.data = (unsigned long)NULL;
@@ -233,7 +233,7 @@ int scsi_block_when_processing_errors(struct scsi_device *sdev)
 
 	online = scsi_device_online(sdev);
 
-	SCSI_LOG_ERROR_RECOVERY(5, printk("%s: rtn: %d\n", __FUNCTION__,
+	SCSI_LOG_ERROR_RECOVERY(5, printk("%s: rtn: %d\n", __func__,
 					  online));
 
 	return online;
@@ -271,7 +271,7 @@ static inline void scsi_eh_prt_fail_stats(struct Scsi_Host *shost,
 			SCSI_LOG_ERROR_RECOVERY(3,
 				sdev_printk(KERN_INFO, sdev,
 					    "%s: cmds failed: %d, cancel: %d\n",
-					    __FUNCTION__, cmd_failed,
+					    __func__, cmd_failed,
 					    cmd_cancel));
 			cmd_cancel = 0;
 			cmd_failed = 0;
@@ -344,6 +344,9 @@ static int scsi_check_sense(struct scsi_cmnd *scmd)
 		return /* soft_error */ SUCCESS;
 
 	case ABORTED_COMMAND:
+		if (sshdr.asc == 0x10) /* DIF */
+			return SUCCESS;
+
 		return NEEDS_RETRY;
 	case NOT_READY:
 	case UNIT_ATTENTION:
@@ -470,7 +473,7 @@ static void scsi_eh_done(struct scsi_cmnd *scmd)
 
 	SCSI_LOG_ERROR_RECOVERY(3,
 		printk("%s scmd: %p result: %x\n",
-			__FUNCTION__, scmd, scmd->result));
+			__func__, scmd, scmd->result));
 
 	eh_action = scmd->device->host->eh_action;
 	if (eh_action)
@@ -487,7 +490,7 @@ static int scsi_try_host_reset(struct scsi_cmnd *scmd)
 	int rtn;
 
 	SCSI_LOG_ERROR_RECOVERY(3, printk("%s: Snd Host RST\n",
-					  __FUNCTION__));
+					  __func__));
 
 	if (!scmd->device->host->hostt->eh_host_reset_handler)
 		return FAILED;
@@ -516,7 +519,7 @@ static int scsi_try_bus_reset(struct scsi_cmnd *scmd)
 	int rtn;
 
 	SCSI_LOG_ERROR_RECOVERY(3, printk("%s: Snd Bus RST\n",
-					  __FUNCTION__));
+					  __func__));
 
 	if (!scmd->device->host->hostt->eh_bus_reset_handler)
 		return FAILED;
@@ -664,7 +667,10 @@ void scsi_eh_prep_cmnd(struct scsi_cmnd *scmd, struct scsi_eh_save *ses,
 	ses->sdb = scmd->sdb;
 	ses->next_rq = scmd->request->next_rq;
 	ses->result = scmd->result;
+	ses->underflow = scmd->underflow;
+	ses->prot_op = scmd->prot_op;
 
+	scmd->prot_op = SCSI_PROT_NORMAL;
 	scmd->cmnd = ses->eh_cmnd;
 	memset(scmd->cmnd, 0, BLK_MAX_CDB);
 	memset(&scmd->sdb, 0, sizeof(scmd->sdb));
@@ -722,6 +728,8 @@ void scsi_eh_restore_cmnd(struct scsi_cmnd* scmd, struct scsi_eh_save *ses)
 	scmd->sdb = ses->sdb;
 	scmd->request->next_rq = ses->next_rq;
 	scmd->result = ses->result;
+	scmd->underflow = ses->underflow;
+	scmd->prot_op = ses->prot_op;
 }
 EXPORT_SYMBOL(scsi_eh_restore_cmnd);
 
@@ -766,7 +774,7 @@ static int scsi_send_eh_cmnd(struct scsi_cmnd *scmd, unsigned char *cmnd,
 
 	SCSI_LOG_ERROR_RECOVERY(3,
 		printk("%s: scmd: %p, timeleft: %ld\n",
-			__FUNCTION__, scmd, timeleft));
+			__func__, scmd, timeleft));
 
 	/*
 	 * If there is time left scsi_eh_done got called, and we will
@@ -778,7 +786,7 @@ static int scsi_send_eh_cmnd(struct scsi_cmnd *scmd, unsigned char *cmnd,
 		rtn = scsi_eh_completed_normally(scmd);
 		SCSI_LOG_ERROR_RECOVERY(3,
 			printk("%s: scsi_eh_completed_normally %x\n",
-			       __FUNCTION__, rtn));
+			       __func__, rtn));
 
 		switch (rtn) {
 		case SUCCESS:
@@ -913,7 +921,7 @@ retry_tur:
 	rtn = scsi_send_eh_cmnd(scmd, tur_command, 6, SENSE_TIMEOUT, 0);
 
 	SCSI_LOG_ERROR_RECOVERY(3, printk("%s: scmd %p rtn %x\n",
-		__FUNCTION__, scmd, rtn));
+		__func__, scmd, rtn));
 
 	switch (rtn) {
 	case NEEDS_RETRY:
@@ -1296,7 +1304,7 @@ int scsi_decide_disposition(struct scsi_cmnd *scmd)
 	if (!scsi_device_online(scmd->device)) {
 		SCSI_LOG_ERROR_RECOVERY(5, printk("%s: device offline - report"
 						  " as SUCCESS\n",
-						  __FUNCTION__));
+						  __func__));
 		return SUCCESS;
 	}
 
@@ -1511,7 +1519,7 @@ static void scsi_restart_operations(struct Scsi_Host *shost)
 	 * ioctls to queued block devices.
 	 */
 	SCSI_LOG_ERROR_RECOVERY(3, printk("%s: waking up host to restart\n",
-					  __FUNCTION__));
+					  __func__));
 
 	spin_lock_irqsave(shost->host_lock, flags);
 	if (scsi_host_set_state(shost, SHOST_RUNNING))
@@ -1835,7 +1843,7 @@ scsi_reset_provider(struct scsi_device *dev, int flag)
 	 */
 	SCSI_LOG_ERROR_RECOVERY(3,
 		printk("%s: waking up host to restart after TMF\n",
-		__FUNCTION__));
+		__func__));
 
 	wake_up(&shost->host_wait);
 
diff --git a/drivers/scsi/scsi_lib.c b/drivers/scsi/scsi_lib.c
index 88d1b5f44e59..ff5d56b3ee4d 100644
--- a/drivers/scsi/scsi_lib.c
+++ b/drivers/scsi/scsi_lib.c
@@ -65,7 +65,7 @@ static struct scsi_host_sg_pool scsi_sg_pools[] = {
 };
 #undef SP
 
-static struct kmem_cache *scsi_sdb_cache;
+struct kmem_cache *scsi_sdb_cache;
 
 static void scsi_run_queue(struct request_queue *q);
 
@@ -787,6 +787,9 @@ void scsi_release_buffers(struct scsi_cmnd *cmd)
 		kmem_cache_free(scsi_sdb_cache, bidi_sdb);
 		cmd->request->next_rq->special = NULL;
 	}
+
+	if (scsi_prot_sg_count(cmd))
+		scsi_free_sgtable(cmd->prot_sdb);
 }
 EXPORT_SYMBOL(scsi_release_buffers);
 
@@ -947,9 +950,14 @@ void scsi_io_completion(struct scsi_cmnd *cmd, unsigned int good_bytes)
 				 * 6-byte command.
 				 */
 				scsi_requeue_command(q, cmd);
-				return;
-			} else {
+			} else if (sshdr.asc == 0x10) /* DIX */
+				scsi_end_request(cmd, -EIO, this_count, 0);
+			else
 				scsi_end_request(cmd, -EIO, this_count, 1);
+			return;
+		case ABORTED_COMMAND:
+			if (sshdr.asc == 0x10) { /* DIF */
+				scsi_end_request(cmd, -EIO, this_count, 0);
 				return;
 			}
 			break;
@@ -1072,6 +1080,26 @@ int scsi_init_io(struct scsi_cmnd *cmd, gfp_t gfp_mask)
 			goto err_exit;
 	}
 
+	if (blk_integrity_rq(cmd->request)) {
+		struct scsi_data_buffer *prot_sdb = cmd->prot_sdb;
+		int ivecs, count;
+
+		BUG_ON(prot_sdb == NULL);
+		ivecs = blk_rq_count_integrity_sg(cmd->request);
+
+		if (scsi_alloc_sgtable(prot_sdb, ivecs, gfp_mask)) {
+			error = BLKPREP_DEFER;
+			goto err_exit;
+		}
+
+		count = blk_rq_map_integrity_sg(cmd->request,
+						prot_sdb->table.sgl);
+		BUG_ON(unlikely(count > ivecs));
+
+		cmd->prot_sdb = prot_sdb;
+		cmd->prot_sdb->table.nents = count;
+	}
+
 	return BLKPREP_OK ;
 
 err_exit:
@@ -1367,7 +1395,7 @@ static void scsi_kill_request(struct request *req, struct request_queue *q)
 
 	if (unlikely(cmd == NULL)) {
 		printk(KERN_CRIT "impossible request in %s.\n",
-				 __FUNCTION__);
+				 __func__);
 		BUG();
 	}
 
@@ -1491,12 +1519,27 @@ static void scsi_request_fn(struct request_queue *q)
 			printk(KERN_CRIT "impossible request in %s.\n"
 					 "please mail a stack trace to "
 					 "linux-scsi@vger.kernel.org\n",
-					 __FUNCTION__);
+					 __func__);
 			blk_dump_rq_flags(req, "foo");
 			BUG();
 		}
 		spin_lock(shost->host_lock);
 
+		/*
+		 * We hit this when the driver is using a host wide
+		 * tag map. For device level tag maps the queue_depth check
+		 * in the device ready fn would prevent us from trying
+		 * to allocate a tag. Since the map is a shared host resource
+		 * we add the dev to the starved list so it eventually gets
+		 * a run when a tag is freed.
+		 */
+		if (blk_queue_tagged(q) && !blk_rq_tagged(req)) {
+			if (list_empty(&sdev->starved_entry))
+				list_add_tail(&sdev->starved_entry,
+					      &shost->starved_list);
+			goto not_ready;
+		}
+
 		if (!scsi_host_queue_ready(q, shost, sdev))
 			goto not_ready;
 		if (scsi_target(sdev)->single_lun) {
@@ -2486,7 +2529,7 @@ void *scsi_kmap_atomic_sg(struct scatterlist *sgl, int sg_count,
 	if (unlikely(i == sg_count)) {
 		printk(KERN_ERR "%s: Bytes in sg: %zu, requested offset %zu, "
 			"elements %d\n",
-		       __FUNCTION__, sg_len, *offset, sg_count);
+		       __func__, sg_len, *offset, sg_count);
 		WARN_ON(1);
 		return NULL;
 	}
diff --git a/drivers/scsi/scsi_netlink.c b/drivers/scsi/scsi_netlink.c
index 370c78cc1cb5..ae7ed9a22662 100644
--- a/drivers/scsi/scsi_netlink.c
+++ b/drivers/scsi/scsi_netlink.c
@@ -55,7 +55,7 @@ scsi_nl_rcv_msg(struct sk_buff *skb)
 		if ((nlh->nlmsg_len < (sizeof(*nlh) + sizeof(*hdr))) ||
 		    (skb->len < nlh->nlmsg_len)) {
 			printk(KERN_WARNING "%s: discarding partial skb\n",
-				 __FUNCTION__);
+				 __func__);
 			return;
 		}
 
@@ -82,7 +82,7 @@ scsi_nl_rcv_msg(struct sk_buff *skb)
 
 		if (nlh->nlmsg_len < (sizeof(*nlh) + hdr->msglen)) {
 			printk(KERN_WARNING "%s: discarding partial message\n",
-				 __FUNCTION__);
+				 __func__);
 			return;
 		}
 
@@ -139,7 +139,7 @@ scsi_netlink_init(void)
 	error = netlink_register_notifier(&scsi_netlink_notifier);
 	if (error) {
 		printk(KERN_ERR "%s: register of event handler failed - %d\n",
-				__FUNCTION__, error);
+				__func__, error);
 		return;
 	}
 
@@ -148,7 +148,7 @@ scsi_netlink_init(void)
 				THIS_MODULE);
 	if (!scsi_nl_sock) {
 		printk(KERN_ERR "%s: register of recieve handler failed\n",
-				__FUNCTION__);
+				__func__);
 		netlink_unregister_notifier(&scsi_netlink_notifier);
 	}
 
diff --git a/drivers/scsi/scsi_priv.h b/drivers/scsi/scsi_priv.h
index b33e72516ef8..79f0f7511204 100644
--- a/drivers/scsi/scsi_priv.h
+++ b/drivers/scsi/scsi_priv.h
@@ -77,6 +77,7 @@ extern void scsi_exit_queue(void);
 struct request_queue;
 struct request;
 extern int scsi_prep_fn(struct request_queue *, struct request *);
+extern struct kmem_cache *scsi_sdb_cache;
 
 /* scsi_proc.c */
 #ifdef CONFIG_SCSI_PROC_FS
diff --git a/drivers/scsi/scsi_proc.c b/drivers/scsi/scsi_proc.c
index e4a0d2f9b357..c6a904a45bf9 100644
--- a/drivers/scsi/scsi_proc.c
+++ b/drivers/scsi/scsi_proc.c
@@ -114,7 +114,7 @@ void scsi_proc_hostdir_add(struct scsi_host_template *sht)
 		sht->proc_dir = proc_mkdir(sht->proc_name, proc_scsi);
         	if (!sht->proc_dir)
 			printk(KERN_ERR "%s: proc_mkdir failed for %s\n",
-			       __FUNCTION__, sht->proc_name);
+			       __func__, sht->proc_name);
 		else
 			sht->proc_dir->owner = sht->module;
 	}
@@ -157,7 +157,7 @@ void scsi_proc_host_add(struct Scsi_Host *shost)
 			sht->proc_dir, proc_scsi_read, shost);
 	if (!p) {
 		printk(KERN_ERR "%s: Failed to register host %d in"
-		       "%s\n", __FUNCTION__, shost->host_no,
+		       "%s\n", __func__, shost->host_no,
 		       sht->proc_name);
 		return;
 	} 
diff --git a/drivers/scsi/scsi_scan.c b/drivers/scsi/scsi_scan.c
index 196fe3af0d5e..84b4879cff11 100644
--- a/drivers/scsi/scsi_scan.c
+++ b/drivers/scsi/scsi_scan.c
@@ -318,7 +318,7 @@ out_device_destroy:
 	put_device(&sdev->sdev_gendev);
 out:
 	if (display_failure_msg)
-		printk(ALLOC_FAILURE_MSG, __FUNCTION__);
+		printk(ALLOC_FAILURE_MSG, __func__);
 	return NULL;
 }
 
@@ -404,7 +404,7 @@ static struct scsi_target *scsi_alloc_target(struct device *parent,
 
 	starget = kzalloc(size, GFP_KERNEL);
 	if (!starget) {
-		printk(KERN_ERR "%s: allocation failure\n", __FUNCTION__);
+		printk(KERN_ERR "%s: allocation failure\n", __func__);
 		return NULL;
 	}
 	dev = &starget->dev;
@@ -1337,7 +1337,7 @@ static int scsi_report_lun_scan(struct scsi_target *starget, int bflags,
 	lun_data = kmalloc(length, GFP_ATOMIC |
 			   (sdev->host->unchecked_isa_dma ? __GFP_DMA : 0));
 	if (!lun_data) {
-		printk(ALLOC_FAILURE_MSG, __FUNCTION__);
+		printk(ALLOC_FAILURE_MSG, __func__);
 		goto out;
 	}
 
@@ -1649,7 +1649,7 @@ int scsi_scan_host_selected(struct Scsi_Host *shost, unsigned int channel,
 {
 	SCSI_LOG_SCAN_BUS(3, shost_printk (KERN_INFO, shost,
 		"%s: <%u:%u:%u>\n",
-		__FUNCTION__, channel, id, lun));
+		__func__, channel, id, lun));
 
 	if (((channel != SCAN_WILD_CARD) && (channel > shost->max_channel)) ||
 	    ((id != SCAN_WILD_CARD) && (id >= shost->max_id)) ||
@@ -1703,7 +1703,7 @@ static struct async_scan_data *scsi_prep_async_scan(struct Scsi_Host *shost)
 		return NULL;
 
 	if (shost->async_scan) {
-		printk("%s called twice for host %d", __FUNCTION__,
+		printk("%s called twice for host %d", __func__,
 				shost->host_no);
 		dump_stack();
 		return NULL;
@@ -1757,9 +1757,10 @@ static void scsi_finish_async_scan(struct async_scan_data *data)
 	mutex_lock(&shost->scan_mutex);
 
 	if (!shost->async_scan) {
-		printk("%s called twice for host %d", __FUNCTION__,
+		printk("%s called twice for host %d", __func__,
 				shost->host_no);
 		dump_stack();
+		mutex_unlock(&shost->scan_mutex);
 		return;
 	}
 
diff --git a/drivers/scsi/scsi_sysfs.c b/drivers/scsi/scsi_sysfs.c
index b6e561059779..ab3c71869be5 100644
--- a/drivers/scsi/scsi_sysfs.c
+++ b/drivers/scsi/scsi_sysfs.c
@@ -249,6 +249,8 @@ shost_rd_attr(cmd_per_lun, "%hd\n");
 shost_rd_attr(can_queue, "%hd\n");
 shost_rd_attr(sg_tablesize, "%hu\n");
 shost_rd_attr(unchecked_isa_dma, "%d\n");
+shost_rd_attr(prot_capabilities, "%u\n");
+shost_rd_attr(prot_guard_type, "%hd\n");
 shost_rd_attr2(proc_name, hostt->proc_name, "%s\n");
 
 static struct attribute *scsi_sysfs_shost_attrs[] = {
@@ -263,6 +265,8 @@ static struct attribute *scsi_sysfs_shost_attrs[] = {
 	&dev_attr_hstate.attr,
 	&dev_attr_supported_mode.attr,
 	&dev_attr_active_mode.attr,
+	&dev_attr_prot_capabilities.attr,
+	&dev_attr_prot_guard_type.attr,
 	NULL
 };
 
diff --git a/drivers/scsi/scsi_tgt_priv.h b/drivers/scsi/scsi_tgt_priv.h
index cb92888948f9..fe4c62177f78 100644
--- a/drivers/scsi/scsi_tgt_priv.h
+++ b/drivers/scsi/scsi_tgt_priv.h
@@ -6,7 +6,7 @@ struct task_struct;
 /* tmp - will replace with SCSI logging stuff */
 #define eprintk(fmt, args...)					\
 do {								\
-	printk("%s(%d) " fmt, __FUNCTION__, __LINE__, ##args);	\
+	printk("%s(%d) " fmt, __func__, __LINE__, ##args);	\
 } while (0)
 
 #define dprintk(fmt, args...)
diff --git a/drivers/scsi/scsi_transport_fc.c b/drivers/scsi/scsi_transport_fc.c
index a272b9a2c869..56823fd1fb84 100644
--- a/drivers/scsi/scsi_transport_fc.c
+++ b/drivers/scsi/scsi_transport_fc.c
@@ -571,7 +571,7 @@ send_fail:
 	name = get_fc_host_event_code_name(event_code);
 	printk(KERN_WARNING
 		"%s: Dropped Event : host %d %s data 0x%08x - err %d\n",
-		__FUNCTION__, shost->host_no,
+		__func__, shost->host_no,
 		(name) ? name : "<unknown>", event_data, err);
 	return;
 }
@@ -644,7 +644,7 @@ send_vendor_fail_skb:
 send_vendor_fail:
 	printk(KERN_WARNING
 		"%s: Dropped Event : host %d vendor_unique - err %d\n",
-		__FUNCTION__, shost->host_no, err);
+		__func__, shost->host_no, err);
 	return;
 }
 EXPORT_SYMBOL(fc_host_post_vendor_event);
@@ -2464,7 +2464,7 @@ fc_rport_create(struct Scsi_Host *shost, int channel,
 	size = (sizeof(struct fc_rport) + fci->f->dd_fcrport_size);
 	rport = kzalloc(size, GFP_KERNEL);
 	if (unlikely(!rport)) {
-		printk(KERN_ERR "%s: allocation failure\n", __FUNCTION__);
+		printk(KERN_ERR "%s: allocation failure\n", __func__);
 		return NULL;
 	}
 
@@ -3137,7 +3137,7 @@ fc_vport_create(struct Scsi_Host *shost, int channel, struct device *pdev,
 	size = (sizeof(struct fc_vport) + fci->f->dd_fcvport_size);
 	vport = kzalloc(size, GFP_KERNEL);
 	if (unlikely(!vport)) {
-		printk(KERN_ERR "%s: allocation failure\n", __FUNCTION__);
+		printk(KERN_ERR "%s: allocation failure\n", __func__);
 		return -ENOMEM;
 	}
 
@@ -3201,7 +3201,7 @@ fc_vport_create(struct Scsi_Host *shost, int channel, struct device *pdev,
 			printk(KERN_ERR
 				"%s: Cannot create vport symlinks for "
 				"%s, err=%d\n",
-				__FUNCTION__, dev->bus_id, error);
+				__func__, dev->bus_id, error);
 	}
 	spin_lock_irqsave(shost->host_lock, flags);
 	vport->flags &= ~FC_VPORT_CREATING;
@@ -3314,7 +3314,7 @@ fc_vport_sched_delete(struct work_struct *work)
 	if (stat)
 		dev_printk(KERN_ERR, vport->dev.parent,
 			"%s: %s could not be deleted created via "
-			"shost%d channel %d - error %d\n", __FUNCTION__,
+			"shost%d channel %d - error %d\n", __func__,
 			vport->dev.bus_id, vport->shost->host_no,
 			vport->channel, stat);
 }
diff --git a/drivers/scsi/scsi_transport_sas.c b/drivers/scsi/scsi_transport_sas.c
index f4461d35ffb9..366609386be1 100644
--- a/drivers/scsi/scsi_transport_sas.c
+++ b/drivers/scsi/scsi_transport_sas.c
@@ -779,7 +779,7 @@ static void sas_port_create_link(struct sas_port *port,
 	return;
 err:
 	printk(KERN_ERR "%s: Cannot create port links, err=%d\n",
-	       __FUNCTION__, res);
+	       __func__, res);
 }
 
 static void sas_port_delete_link(struct sas_port *port,
@@ -1029,7 +1029,7 @@ void sas_port_mark_backlink(struct sas_port *port)
 	return;
 err:
 	printk(KERN_ERR "%s: Cannot create port backlink, err=%d\n",
-	       __FUNCTION__, res);
+	       __func__, res);
 
 }
 EXPORT_SYMBOL(sas_port_mark_backlink);
diff --git a/drivers/scsi/scsi_transport_spi.c b/drivers/scsi/scsi_transport_spi.c
index 75a64a6cae8c..b29360ed0bdc 100644
--- a/drivers/scsi/scsi_transport_spi.c
+++ b/drivers/scsi/scsi_transport_spi.c
@@ -366,12 +366,14 @@ spi_transport_rd_attr(rti, "%d\n");
 spi_transport_rd_attr(pcomp_en, "%d\n");
 spi_transport_rd_attr(hold_mcs, "%d\n");
 
-/* we only care about the first child device so we return 1 */
+/* we only care about the first child device that's a real SCSI device
+ * so we return 1 to terminate the iteration when we find it */
 static int child_iter(struct device *dev, void *data)
 {
-	struct scsi_device *sdev = to_scsi_device(dev);
+	if (!scsi_is_sdev_device(dev))
+		return 0;
 
-	spi_dv_device(sdev);
+	spi_dv_device(to_scsi_device(dev));
 	return 1;
 }
 
diff --git a/drivers/scsi/sd.c b/drivers/scsi/sd.c
index 0c63947d8a9d..2a2bc89aba83 100644
--- a/drivers/scsi/sd.c
+++ b/drivers/scsi/sd.c
@@ -99,8 +99,7 @@ static void scsi_disk_release(struct device *cdev);
 static void sd_print_sense_hdr(struct scsi_disk *, struct scsi_sense_hdr *);
 static void sd_print_result(struct scsi_disk *, int);
 
-static DEFINE_IDR(sd_index_idr);
-static DEFINE_SPINLOCK(sd_index_lock);
+static DEFINE_IDA(sd_index_ida);
 
 /* This semaphore is used to mediate the 0->1 reference get in the
  * face of object destruction (i.e. we can't allow a get on an
@@ -234,6 +233,24 @@ sd_show_allow_restart(struct device *dev, struct device_attribute *attr,
 	return snprintf(buf, 40, "%d\n", sdkp->device->allow_restart);
 }
 
+static ssize_t
+sd_show_protection_type(struct device *dev, struct device_attribute *attr,
+			char *buf)
+{
+	struct scsi_disk *sdkp = to_scsi_disk(dev);
+
+	return snprintf(buf, 20, "%u\n", sdkp->protection_type);
+}
+
+static ssize_t
+sd_show_app_tag_own(struct device *dev, struct device_attribute *attr,
+		    char *buf)
+{
+	struct scsi_disk *sdkp = to_scsi_disk(dev);
+
+	return snprintf(buf, 20, "%u\n", sdkp->ATO);
+}
+
 static struct device_attribute sd_disk_attrs[] = {
 	__ATTR(cache_type, S_IRUGO|S_IWUSR, sd_show_cache_type,
 	       sd_store_cache_type),
@@ -242,6 +259,8 @@ static struct device_attribute sd_disk_attrs[] = {
 	       sd_store_allow_restart),
 	__ATTR(manage_start_stop, S_IRUGO|S_IWUSR, sd_show_manage_start_stop,
 	       sd_store_manage_start_stop),
+	__ATTR(protection_type, S_IRUGO, sd_show_protection_type, NULL),
+	__ATTR(app_tag_own, S_IRUGO, sd_show_app_tag_own, NULL),
 	__ATTR_NULL,
 };
 
@@ -354,7 +373,9 @@ static int sd_prep_fn(struct request_queue *q, struct request *rq)
 	struct scsi_cmnd *SCpnt;
 	struct scsi_device *sdp = q->queuedata;
 	struct gendisk *disk = rq->rq_disk;
+	struct scsi_disk *sdkp;
 	sector_t block = rq->sector;
+	sector_t threshold;
 	unsigned int this_count = rq->nr_sectors;
 	unsigned int timeout = sdp->timeout;
 	int ret;
@@ -370,6 +391,7 @@ static int sd_prep_fn(struct request_queue *q, struct request *rq)
 	if (ret != BLKPREP_OK)
 		goto out;
 	SCpnt = rq->special;
+	sdkp = scsi_disk(disk);
 
 	/* from here on until we're complete, any goto out
 	 * is used for a killable error condition */
@@ -401,13 +423,21 @@ static int sd_prep_fn(struct request_queue *q, struct request *rq)
 	}
 
 	/*
-	 * Some devices (some sdcards for one) don't like it if the
-	 * last sector gets read in a larger then 1 sector read.
+	 * Some SD card readers can't handle multi-sector accesses which touch
+	 * the last one or two hardware sectors.  Split accesses as needed.
 	 */
-	if (unlikely(sdp->last_sector_bug &&
-	    rq->nr_sectors > sdp->sector_size / 512 &&
-	    block + this_count == get_capacity(disk)))
-		this_count -= sdp->sector_size / 512;
+	threshold = get_capacity(disk) - SD_LAST_BUGGY_SECTORS *
+		(sdp->sector_size / 512);
+
+	if (unlikely(sdp->last_sector_bug && block + this_count > threshold)) {
+		if (block < threshold) {
+			/* Access up to the threshold but not beyond */
+			this_count = threshold - block;
+		} else {
+			/* Access only a single hardware sector */
+			this_count = sdp->sector_size / 512;
+		}
+	}
 
 	SCSI_LOG_HLQUEUE(2, scmd_printk(KERN_INFO, SCpnt, "block=%llu\n",
 					(unsigned long long)block));
@@ -459,6 +489,11 @@ static int sd_prep_fn(struct request_queue *q, struct request *rq)
 		}
 		SCpnt->cmnd[0] = WRITE_6;
 		SCpnt->sc_data_direction = DMA_TO_DEVICE;
+
+		if (blk_integrity_rq(rq) &&
+		    sd_dif_prepare(rq, block, sdp->sector_size) == -EIO)
+			goto out;
+
 	} else if (rq_data_dir(rq) == READ) {
 		SCpnt->cmnd[0] = READ_6;
 		SCpnt->sc_data_direction = DMA_FROM_DEVICE;
@@ -473,8 +508,12 @@ static int sd_prep_fn(struct request_queue *q, struct request *rq)
 					"writing" : "reading", this_count,
 					rq->nr_sectors));
 
-	SCpnt->cmnd[1] = 0;
-	
+	/* Set RDPROTECT/WRPROTECT if disk is formatted with DIF */
+	if (scsi_host_dif_capable(sdp->host, sdkp->protection_type))
+		SCpnt->cmnd[1] = 1 << 5;
+	else
+		SCpnt->cmnd[1] = 0;
+
 	if (block > 0xffffffff) {
 		SCpnt->cmnd[0] += READ_16 - READ_6;
 		SCpnt->cmnd[1] |= blk_fua_rq(rq) ? 0x8 : 0;
@@ -492,6 +531,7 @@ static int sd_prep_fn(struct request_queue *q, struct request *rq)
 		SCpnt->cmnd[13] = (unsigned char) this_count & 0xff;
 		SCpnt->cmnd[14] = SCpnt->cmnd[15] = 0;
 	} else if ((this_count > 0xff) || (block > 0x1fffff) ||
+		   scsi_device_protection(SCpnt->device) ||
 		   SCpnt->device->use_10_for_rw) {
 		if (this_count > 0xffff)
 			this_count = 0xffff;
@@ -526,6 +566,10 @@ static int sd_prep_fn(struct request_queue *q, struct request *rq)
 	}
 	SCpnt->sdb.length = this_count * sdp->sector_size;
 
+	/* If DIF or DIX is enabled, tell HBA how to handle request */
+	if (sdkp->protection_type || scsi_prot_sg_count(SCpnt))
+		sd_dif_op(SCpnt, sdkp->protection_type, scsi_prot_sg_count(SCpnt));
+
 	/*
 	 * We shouldn't disconnect in the middle of a sector, so with a dumb
 	 * host adapter, it's safe to assume that we can at least transfer
@@ -920,6 +964,48 @@ static struct block_device_operations sd_fops = {
 	.revalidate_disk	= sd_revalidate_disk,
 };
 
+static unsigned int sd_completed_bytes(struct scsi_cmnd *scmd)
+{
+	u64 start_lba = scmd->request->sector;
+	u64 end_lba = scmd->request->sector + (scsi_bufflen(scmd) / 512);
+	u64 bad_lba;
+	int info_valid;
+
+	if (!blk_fs_request(scmd->request))
+		return 0;
+
+	info_valid = scsi_get_sense_info_fld(scmd->sense_buffer,
+					     SCSI_SENSE_BUFFERSIZE,
+					     &bad_lba);
+	if (!info_valid)
+		return 0;
+
+	if (scsi_bufflen(scmd) <= scmd->device->sector_size)
+		return 0;
+
+	if (scmd->device->sector_size < 512) {
+		/* only legitimate sector_size here is 256 */
+		start_lba <<= 1;
+		end_lba <<= 1;
+	} else {
+		/* be careful ... don't want any overflows */
+		u64 factor = scmd->device->sector_size / 512;
+		do_div(start_lba, factor);
+		do_div(end_lba, factor);
+	}
+
+	/* The bad lba was reported incorrectly, we have no idea where
+	 * the error is.
+	 */
+	if (bad_lba < start_lba  || bad_lba >= end_lba)
+		return 0;
+
+	/* This computation should always be done in terms of
+	 * the resolution of the device's medium.
+	 */
+	return (bad_lba - start_lba) * scmd->device->sector_size;
+}
+
 /**
  *	sd_done - bottom half handler: called when the lower level
  *	driver has completed (successfully or otherwise) a scsi command.
@@ -930,15 +1016,10 @@ static struct block_device_operations sd_fops = {
 static int sd_done(struct scsi_cmnd *SCpnt)
 {
 	int result = SCpnt->result;
-	unsigned int xfer_size = scsi_bufflen(SCpnt);
- 	unsigned int good_bytes = result ? 0 : xfer_size;
- 	u64 start_lba = SCpnt->request->sector;
-	u64 end_lba = SCpnt->request->sector + (xfer_size / 512);
- 	u64 bad_lba;
+	unsigned int good_bytes = result ? 0 : scsi_bufflen(SCpnt);
 	struct scsi_sense_hdr sshdr;
 	int sense_valid = 0;
 	int sense_deferred = 0;
-	int info_valid;
 
 	if (result) {
 		sense_valid = scsi_command_normalize_sense(SCpnt, &sshdr);
@@ -963,36 +1044,7 @@ static int sd_done(struct scsi_cmnd *SCpnt)
 	switch (sshdr.sense_key) {
 	case HARDWARE_ERROR:
 	case MEDIUM_ERROR:
-		if (!blk_fs_request(SCpnt->request))
-			goto out;
-		info_valid = scsi_get_sense_info_fld(SCpnt->sense_buffer,
-						     SCSI_SENSE_BUFFERSIZE,
-						     &bad_lba);
-		if (!info_valid)
-			goto out;
-		if (xfer_size <= SCpnt->device->sector_size)
-			goto out;
-		if (SCpnt->device->sector_size < 512) {
-			/* only legitimate sector_size here is 256 */
-			start_lba <<= 1;
-			end_lba <<= 1;
-		} else {
-			/* be careful ... don't want any overflows */
-			u64 factor = SCpnt->device->sector_size / 512;
-			do_div(start_lba, factor);
-			do_div(end_lba, factor);
-		}
-
-		if (bad_lba < start_lba  || bad_lba >= end_lba)
-			/* the bad lba was reported incorrectly, we have
-			 * no idea where the error is
-			 */
-			goto out;
-
-		/* This computation should always be done in terms of
-		 * the resolution of the device's medium.
-		 */
-		good_bytes = (bad_lba - start_lba)*SCpnt->device->sector_size;
+		good_bytes = sd_completed_bytes(SCpnt);
 		break;
 	case RECOVERED_ERROR:
 	case NO_SENSE:
@@ -1002,10 +1054,23 @@ static int sd_done(struct scsi_cmnd *SCpnt)
 		scsi_print_sense("sd", SCpnt);
 		SCpnt->result = 0;
 		memset(SCpnt->sense_buffer, 0, SCSI_SENSE_BUFFERSIZE);
-		good_bytes = xfer_size;
+		good_bytes = scsi_bufflen(SCpnt);
+		break;
+	case ABORTED_COMMAND:
+		if (sshdr.asc == 0x10) { /* DIF: Disk detected corruption */
+			scsi_print_result(SCpnt);
+			scsi_print_sense("sd", SCpnt);
+			good_bytes = sd_completed_bytes(SCpnt);
+		}
 		break;
 	case ILLEGAL_REQUEST:
-		if (SCpnt->device->use_10_for_rw &&
+		if (sshdr.asc == 0x10) { /* DIX: HBA detected corruption */
+			scsi_print_result(SCpnt);
+			scsi_print_sense("sd", SCpnt);
+			good_bytes = sd_completed_bytes(SCpnt);
+		}
+		if (!scsi_device_protection(SCpnt->device) &&
+		    SCpnt->device->use_10_for_rw &&
 		    (SCpnt->cmnd[0] == READ_10 ||
 		     SCpnt->cmnd[0] == WRITE_10))
 			SCpnt->device->use_10_for_rw = 0;
@@ -1018,6 +1083,9 @@ static int sd_done(struct scsi_cmnd *SCpnt)
 		break;
 	}
  out:
+	if (rq_data_dir(SCpnt->request) == READ && scsi_prot_sg_count(SCpnt))
+		sd_dif_complete(SCpnt, good_bytes);
+
 	return good_bytes;
 }
 
@@ -1165,6 +1233,49 @@ sd_spinup_disk(struct scsi_disk *sdkp)
 	}
 }
 
+
+/*
+ * Determine whether disk supports Data Integrity Field.
+ */
+void sd_read_protection_type(struct scsi_disk *sdkp, unsigned char *buffer)
+{
+	struct scsi_device *sdp = sdkp->device;
+	u8 type;
+
+	if (scsi_device_protection(sdp) == 0 || (buffer[12] & 1) == 0)
+		type = 0;
+	else
+		type = ((buffer[12] >> 1) & 7) + 1; /* P_TYPE 0 = Type 1 */
+
+	switch (type) {
+	case SD_DIF_TYPE0_PROTECTION:
+		sdkp->protection_type = 0;
+		break;
+
+	case SD_DIF_TYPE1_PROTECTION:
+	case SD_DIF_TYPE3_PROTECTION:
+		sdkp->protection_type = type;
+		break;
+
+	case SD_DIF_TYPE2_PROTECTION:
+		sd_printk(KERN_ERR, sdkp, "formatted with DIF Type 2 "	\
+			  "protection which is currently unsupported. "	\
+			  "Disabling disk!\n");
+		goto disable;
+
+	default:
+		sd_printk(KERN_ERR, sdkp, "formatted with unknown "	\
+			  "protection type %d. Disabling disk!\n", type);
+		goto disable;
+	}
+
+	return;
+
+disable:
+	sdkp->protection_type = 0;
+	sdkp->capacity = 0;
+}
+
 /*
  * read disk capacity
  */
@@ -1174,7 +1285,8 @@ sd_read_capacity(struct scsi_disk *sdkp, unsigned char *buffer)
 	unsigned char cmd[16];
 	int the_result, retries;
 	int sector_size = 0;
-	int longrc = 0;
+	/* Force READ CAPACITY(16) when PROTECT=1 */
+	int longrc = scsi_device_protection(sdkp->device) ? 1 : 0;
 	struct scsi_sense_hdr sshdr;
 	int sense_valid = 0;
 	struct scsi_device *sdp = sdkp->device;
@@ -1186,8 +1298,8 @@ repeat:
 			memset((void *) cmd, 0, 16);
 			cmd[0] = SERVICE_ACTION_IN;
 			cmd[1] = SAI_READ_CAPACITY_16;
-			cmd[13] = 12;
-			memset((void *) buffer, 0, 12);
+			cmd[13] = 13;
+			memset((void *) buffer, 0, 13);
 		} else {
 			cmd[0] = READ_CAPACITY;
 			memset((void *) &cmd[1], 0, 9);
@@ -1195,7 +1307,7 @@ repeat:
 		}
 		
 		the_result = scsi_execute_req(sdp, cmd, DMA_FROM_DEVICE,
-					      buffer, longrc ? 12 : 8, &sshdr,
+					      buffer, longrc ? 13 : 8, &sshdr,
 					      SD_TIMEOUT, SD_MAX_RETRIES);
 
 		if (media_not_present(sdkp, &sshdr))
@@ -1270,6 +1382,8 @@ repeat:
 			
 		sector_size = (buffer[8] << 24) |
 			(buffer[9] << 16) | (buffer[10] << 8) | buffer[11];
+
+		sd_read_protection_type(sdkp, buffer);
 	}	
 
 	/* Some devices return the total number of sectors, not the
@@ -1531,6 +1645,52 @@ defaults:
 	sdkp->DPOFUA = 0;
 }
 
+/*
+ * The ATO bit indicates whether the DIF application tag is available
+ * for use by the operating system.
+ */
+void sd_read_app_tag_own(struct scsi_disk *sdkp, unsigned char *buffer)
+{
+	int res, offset;
+	struct scsi_device *sdp = sdkp->device;
+	struct scsi_mode_data data;
+	struct scsi_sense_hdr sshdr;
+
+	if (sdp->type != TYPE_DISK)
+		return;
+
+	if (sdkp->protection_type == 0)
+		return;
+
+	res = scsi_mode_sense(sdp, 1, 0x0a, buffer, 36, SD_TIMEOUT,
+			      SD_MAX_RETRIES, &data, &sshdr);
+
+	if (!scsi_status_is_good(res) || !data.header_length ||
+	    data.length < 6) {
+		sd_printk(KERN_WARNING, sdkp,
+			  "getting Control mode page failed, assume no ATO\n");
+
+		if (scsi_sense_valid(&sshdr))
+			sd_print_sense_hdr(sdkp, &sshdr);
+
+		return;
+	}
+
+	offset = data.header_length + data.block_descriptor_length;
+
+	if ((buffer[offset] & 0x3f) != 0x0a) {
+		sd_printk(KERN_ERR, sdkp, "ATO Got wrong page\n");
+		return;
+	}
+
+	if ((buffer[offset + 5] & 0x80) == 0)
+		return;
+
+	sdkp->ATO = 1;
+
+	return;
+}
+
 /**
  *	sd_revalidate_disk - called the first time a new disk is seen,
  *	performs disk spin up, read_capacity, etc.
@@ -1567,6 +1727,7 @@ static int sd_revalidate_disk(struct gendisk *disk)
 	sdkp->write_prot = 0;
 	sdkp->WCE = 0;
 	sdkp->RCD = 0;
+	sdkp->ATO = 0;
 
 	sd_spinup_disk(sdkp);
 
@@ -1578,6 +1739,7 @@ static int sd_revalidate_disk(struct gendisk *disk)
 		sd_read_capacity(sdkp, buffer);
 		sd_read_write_protect_flag(sdkp, buffer);
 		sd_read_cache_type(sdkp, buffer);
+		sd_read_app_tag_own(sdkp, buffer);
 	}
 
 	/*
@@ -1643,18 +1805,20 @@ static int sd_probe(struct device *dev)
 	if (!gd)
 		goto out_free;
 
-	if (!idr_pre_get(&sd_index_idr, GFP_KERNEL))
-		goto out_put;
+	do {
+		if (!ida_pre_get(&sd_index_ida, GFP_KERNEL))
+			goto out_put;
 
-	spin_lock(&sd_index_lock);
-	error = idr_get_new(&sd_index_idr, NULL, &index);
-	spin_unlock(&sd_index_lock);
+		error = ida_get_new(&sd_index_ida, &index);
+	} while (error == -EAGAIN);
 
-	if (index >= SD_MAX_DISKS)
-		error = -EBUSY;
 	if (error)
 		goto out_put;
 
+	error = -EBUSY;
+	if (index >= SD_MAX_DISKS)
+		goto out_free_index;
+
 	sdkp->device = sdp;
 	sdkp->driver = &sd_template;
 	sdkp->disk = gd;
@@ -1675,7 +1839,7 @@ static int sd_probe(struct device *dev)
 	strncpy(sdkp->dev.bus_id, sdp->sdev_gendev.bus_id, BUS_ID_SIZE);
 
 	if (device_add(&sdkp->dev))
-		goto out_put;
+		goto out_free_index;
 
 	get_device(&sdp->sdev_gendev);
 
@@ -1711,12 +1875,16 @@ static int sd_probe(struct device *dev)
 
 	dev_set_drvdata(dev, sdkp);
 	add_disk(gd);
+	blk_register_filter(gd);
+	sd_dif_config_host(sdkp);
 
 	sd_printk(KERN_NOTICE, sdkp, "Attached SCSI %sdisk\n",
 		  sdp->removable ? "removable " : "");
 
 	return 0;
 
+ out_free_index:
+	ida_remove(&sd_index_ida, index);
  out_put:
 	put_disk(gd);
  out_free:
@@ -1741,6 +1909,7 @@ static int sd_remove(struct device *dev)
 	struct scsi_disk *sdkp = dev_get_drvdata(dev);
 
 	device_del(&sdkp->dev);
+	blk_unregister_filter(sdkp->disk);
 	del_gendisk(sdkp->disk);
 	sd_shutdown(dev);
 
@@ -1766,9 +1935,7 @@ static void scsi_disk_release(struct device *dev)
 	struct scsi_disk *sdkp = to_scsi_disk(dev);
 	struct gendisk *disk = sdkp->disk;
 	
-	spin_lock(&sd_index_lock);
-	idr_remove(&sd_index_idr, sdkp->index);
-	spin_unlock(&sd_index_lock);
+	ida_remove(&sd_index_ida, sdkp->index);
 
 	disk->private_data = NULL;
 	put_disk(disk);
diff --git a/drivers/scsi/sd.h b/drivers/scsi/sd.h
index 03a3d45cfa42..95b9f06534d5 100644
--- a/drivers/scsi/sd.h
+++ b/drivers/scsi/sd.h
@@ -31,6 +31,12 @@
  */
 #define SD_BUF_SIZE		512
 
+/*
+ * Number of sectors at the end of the device to avoid multi-sector
+ * accesses to in the case of last_sector_bug
+ */
+#define SD_LAST_BUGGY_SECTORS	8
+
 struct scsi_disk {
 	struct scsi_driver *driver;	/* always &sd_template */
 	struct scsi_device *device;
@@ -41,7 +47,9 @@ struct scsi_disk {
 	u32		index;
 	u8		media_present;
 	u8		write_prot;
+	u8		protection_type;/* Data Integrity Field */
 	unsigned	previous_state : 1;
+	unsigned	ATO : 1;	/* state of disk ATO bit */
 	unsigned	WCE : 1;	/* state of disk WCE bit */
 	unsigned	RCD : 1;	/* state of disk RCD bit, unused */
 	unsigned	DPOFUA : 1;	/* state of disk DPOFUA bit */
@@ -59,4 +67,50 @@ static inline struct scsi_disk *scsi_disk(struct gendisk *disk)
 		    (sdsk)->disk->disk_name, ##a) :			\
 	sdev_printk(prefix, (sdsk)->device, fmt, ##a)
 
+/*
+ * A DIF-capable target device can be formatted with different
+ * protection schemes.  Currently 0 through 3 are defined:
+ *
+ * Type 0 is regular (unprotected) I/O
+ *
+ * Type 1 defines the contents of the guard and reference tags
+ *
+ * Type 2 defines the contents of the guard and reference tags and
+ * uses 32-byte commands to seed the latter
+ *
+ * Type 3 defines the contents of the guard tag only
+ */
+
+enum sd_dif_target_protection_types {
+	SD_DIF_TYPE0_PROTECTION = 0x0,
+	SD_DIF_TYPE1_PROTECTION = 0x1,
+	SD_DIF_TYPE2_PROTECTION = 0x2,
+	SD_DIF_TYPE3_PROTECTION = 0x3,
+};
+
+/*
+ * Data Integrity Field tuple.
+ */
+struct sd_dif_tuple {
+       __be16 guard_tag;	/* Checksum */
+       __be16 app_tag;		/* Opaque storage */
+       __be32 ref_tag;		/* Target LBA or indirect LBA */
+};
+
+#if defined(CONFIG_BLK_DEV_INTEGRITY)
+
+extern void sd_dif_op(struct scsi_cmnd *, unsigned int, unsigned int);
+extern void sd_dif_config_host(struct scsi_disk *);
+extern int sd_dif_prepare(struct request *rq, sector_t, unsigned int);
+extern void sd_dif_complete(struct scsi_cmnd *, unsigned int);
+
+#else /* CONFIG_BLK_DEV_INTEGRITY */
+
+#define sd_dif_op(a, b, c)			do { } while (0)
+#define sd_dif_config_host(a)			do { } while (0)
+#define sd_dif_prepare(a, b, c)			(0)
+#define sd_dif_complete(a, b)			(0)
+
+#endif /* CONFIG_BLK_DEV_INTEGRITY */
+
 #endif /* _SCSI_DISK_H */
diff --git a/drivers/scsi/sd_dif.c b/drivers/scsi/sd_dif.c
new file mode 100644
index 000000000000..4d17f3d35aac
--- /dev/null
+++ b/drivers/scsi/sd_dif.c
@@ -0,0 +1,538 @@
+/*
+ * sd_dif.c - SCSI Data Integrity Field
+ *
+ * Copyright (C) 2007, 2008 Oracle Corporation
+ * Written by: Martin K. Petersen <martin.petersen@oracle.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version
+ * 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; see the file COPYING.  If not, write to
+ * the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139,
+ * USA.
+ *
+ */
+
+#include <linux/blkdev.h>
+#include <linux/crc-t10dif.h>
+
+#include <scsi/scsi.h>
+#include <scsi/scsi_cmnd.h>
+#include <scsi/scsi_dbg.h>
+#include <scsi/scsi_device.h>
+#include <scsi/scsi_driver.h>
+#include <scsi/scsi_eh.h>
+#include <scsi/scsi_host.h>
+#include <scsi/scsi_ioctl.h>
+#include <scsi/scsicam.h>
+
+#include <net/checksum.h>
+
+#include "sd.h"
+
+typedef __u16 (csum_fn) (void *, unsigned int);
+
+static __u16 sd_dif_crc_fn(void *data, unsigned int len)
+{
+	return cpu_to_be16(crc_t10dif(data, len));
+}
+
+static __u16 sd_dif_ip_fn(void *data, unsigned int len)
+{
+	return ip_compute_csum(data, len);
+}
+
+/*
+ * Type 1 and Type 2 protection use the same format: 16 bit guard tag,
+ * 16 bit app tag, 32 bit reference tag.
+ */
+static void sd_dif_type1_generate(struct blk_integrity_exchg *bix, csum_fn *fn)
+{
+	void *buf = bix->data_buf;
+	struct sd_dif_tuple *sdt = bix->prot_buf;
+	sector_t sector = bix->sector;
+	unsigned int i;
+
+	for (i = 0 ; i < bix->data_size ; i += bix->sector_size, sdt++) {
+		sdt->guard_tag = fn(buf, bix->sector_size);
+		sdt->ref_tag = cpu_to_be32(sector & 0xffffffff);
+		sdt->app_tag = 0;
+
+		buf += bix->sector_size;
+		sector++;
+	}
+}
+
+static void sd_dif_type1_generate_crc(struct blk_integrity_exchg *bix)
+{
+	sd_dif_type1_generate(bix, sd_dif_crc_fn);
+}
+
+static void sd_dif_type1_generate_ip(struct blk_integrity_exchg *bix)
+{
+	sd_dif_type1_generate(bix, sd_dif_ip_fn);
+}
+
+static int sd_dif_type1_verify(struct blk_integrity_exchg *bix, csum_fn *fn)
+{
+	void *buf = bix->data_buf;
+	struct sd_dif_tuple *sdt = bix->prot_buf;
+	sector_t sector = bix->sector;
+	unsigned int i;
+	__u16 csum;
+
+	for (i = 0 ; i < bix->data_size ; i += bix->sector_size, sdt++) {
+		/* Unwritten sectors */
+		if (sdt->app_tag == 0xffff)
+			return 0;
+
+		/* Bad ref tag received from disk */
+		if (sdt->ref_tag == 0xffffffff) {
+			printk(KERN_ERR
+			       "%s: bad phys ref tag on sector %lu\n",
+			       bix->disk_name, (unsigned long)sector);
+			return -EIO;
+		}
+
+		if (be32_to_cpu(sdt->ref_tag) != (sector & 0xffffffff)) {
+			printk(KERN_ERR
+			       "%s: ref tag error on sector %lu (rcvd %u)\n",
+			       bix->disk_name, (unsigned long)sector,
+			       be32_to_cpu(sdt->ref_tag));
+			return -EIO;
+		}
+
+		csum = fn(buf, bix->sector_size);
+
+		if (sdt->guard_tag != csum) {
+			printk(KERN_ERR "%s: guard tag error on sector %lu " \
+			       "(rcvd %04x, data %04x)\n", bix->disk_name,
+			       (unsigned long)sector,
+			       be16_to_cpu(sdt->guard_tag), be16_to_cpu(csum));
+			return -EIO;
+		}
+
+		buf += bix->sector_size;
+		sector++;
+	}
+
+	return 0;
+}
+
+static int sd_dif_type1_verify_crc(struct blk_integrity_exchg *bix)
+{
+	return sd_dif_type1_verify(bix, sd_dif_crc_fn);
+}
+
+static int sd_dif_type1_verify_ip(struct blk_integrity_exchg *bix)
+{
+	return sd_dif_type1_verify(bix, sd_dif_ip_fn);
+}
+
+/*
+ * Functions for interleaving and deinterleaving application tags
+ */
+static void sd_dif_type1_set_tag(void *prot, void *tag_buf, unsigned int sectors)
+{
+	struct sd_dif_tuple *sdt = prot;
+	char *tag = tag_buf;
+	unsigned int i, j;
+
+	for (i = 0, j = 0 ; i < sectors ; i++, j += 2, sdt++) {
+		sdt->app_tag = tag[j] << 8 | tag[j+1];
+		BUG_ON(sdt->app_tag == 0xffff);
+	}
+}
+
+static void sd_dif_type1_get_tag(void *prot, void *tag_buf, unsigned int sectors)
+{
+	struct sd_dif_tuple *sdt = prot;
+	char *tag = tag_buf;
+	unsigned int i, j;
+
+	for (i = 0, j = 0 ; i < sectors ; i++, j += 2, sdt++) {
+		tag[j] = (sdt->app_tag & 0xff00) >> 8;
+		tag[j+1] = sdt->app_tag & 0xff;
+	}
+}
+
+static struct blk_integrity dif_type1_integrity_crc = {
+	.name			= "T10-DIF-TYPE1-CRC",
+	.generate_fn		= sd_dif_type1_generate_crc,
+	.verify_fn		= sd_dif_type1_verify_crc,
+	.get_tag_fn		= sd_dif_type1_get_tag,
+	.set_tag_fn		= sd_dif_type1_set_tag,
+	.tuple_size		= sizeof(struct sd_dif_tuple),
+	.tag_size		= 0,
+};
+
+static struct blk_integrity dif_type1_integrity_ip = {
+	.name			= "T10-DIF-TYPE1-IP",
+	.generate_fn		= sd_dif_type1_generate_ip,
+	.verify_fn		= sd_dif_type1_verify_ip,
+	.get_tag_fn		= sd_dif_type1_get_tag,
+	.set_tag_fn		= sd_dif_type1_set_tag,
+	.tuple_size		= sizeof(struct sd_dif_tuple),
+	.tag_size		= 0,
+};
+
+
+/*
+ * Type 3 protection has a 16-bit guard tag and 16 + 32 bits of opaque
+ * tag space.
+ */
+static void sd_dif_type3_generate(struct blk_integrity_exchg *bix, csum_fn *fn)
+{
+	void *buf = bix->data_buf;
+	struct sd_dif_tuple *sdt = bix->prot_buf;
+	unsigned int i;
+
+	for (i = 0 ; i < bix->data_size ; i += bix->sector_size, sdt++) {
+		sdt->guard_tag = fn(buf, bix->sector_size);
+		sdt->ref_tag = 0;
+		sdt->app_tag = 0;
+
+		buf += bix->sector_size;
+	}
+}
+
+static void sd_dif_type3_generate_crc(struct blk_integrity_exchg *bix)
+{
+	sd_dif_type3_generate(bix, sd_dif_crc_fn);
+}
+
+static void sd_dif_type3_generate_ip(struct blk_integrity_exchg *bix)
+{
+	sd_dif_type3_generate(bix, sd_dif_ip_fn);
+}
+
+static int sd_dif_type3_verify(struct blk_integrity_exchg *bix, csum_fn *fn)
+{
+	void *buf = bix->data_buf;
+	struct sd_dif_tuple *sdt = bix->prot_buf;
+	sector_t sector = bix->sector;
+	unsigned int i;
+	__u16 csum;
+
+	for (i = 0 ; i < bix->data_size ; i += bix->sector_size, sdt++) {
+		/* Unwritten sectors */
+		if (sdt->app_tag == 0xffff && sdt->ref_tag == 0xffffffff)
+			return 0;
+
+		csum = fn(buf, bix->sector_size);
+
+		if (sdt->guard_tag != csum) {
+			printk(KERN_ERR "%s: guard tag error on sector %lu " \
+			       "(rcvd %04x, data %04x)\n", bix->disk_name,
+			       (unsigned long)sector,
+			       be16_to_cpu(sdt->guard_tag), be16_to_cpu(csum));
+			return -EIO;
+		}
+
+		buf += bix->sector_size;
+		sector++;
+	}
+
+	return 0;
+}
+
+static int sd_dif_type3_verify_crc(struct blk_integrity_exchg *bix)
+{
+	return sd_dif_type3_verify(bix, sd_dif_crc_fn);
+}
+
+static int sd_dif_type3_verify_ip(struct blk_integrity_exchg *bix)
+{
+	return sd_dif_type3_verify(bix, sd_dif_ip_fn);
+}
+
+static void sd_dif_type3_set_tag(void *prot, void *tag_buf, unsigned int sectors)
+{
+	struct sd_dif_tuple *sdt = prot;
+	char *tag = tag_buf;
+	unsigned int i, j;
+
+	for (i = 0, j = 0 ; i < sectors ; i++, j += 6, sdt++) {
+		sdt->app_tag = tag[j] << 8 | tag[j+1];
+		sdt->ref_tag = tag[j+2] << 24 | tag[j+3] << 16 |
+			tag[j+4] << 8 | tag[j+5];
+	}
+}
+
+static void sd_dif_type3_get_tag(void *prot, void *tag_buf, unsigned int sectors)
+{
+	struct sd_dif_tuple *sdt = prot;
+	char *tag = tag_buf;
+	unsigned int i, j;
+
+	for (i = 0, j = 0 ; i < sectors ; i++, j += 2, sdt++) {
+		tag[j] = (sdt->app_tag & 0xff00) >> 8;
+		tag[j+1] = sdt->app_tag & 0xff;
+		tag[j+2] = (sdt->ref_tag & 0xff000000) >> 24;
+		tag[j+3] = (sdt->ref_tag & 0xff0000) >> 16;
+		tag[j+4] = (sdt->ref_tag & 0xff00) >> 8;
+		tag[j+5] = sdt->ref_tag & 0xff;
+		BUG_ON(sdt->app_tag == 0xffff || sdt->ref_tag == 0xffffffff);
+	}
+}
+
+static struct blk_integrity dif_type3_integrity_crc = {
+	.name			= "T10-DIF-TYPE3-CRC",
+	.generate_fn		= sd_dif_type3_generate_crc,
+	.verify_fn		= sd_dif_type3_verify_crc,
+	.get_tag_fn		= sd_dif_type3_get_tag,
+	.set_tag_fn		= sd_dif_type3_set_tag,
+	.tuple_size		= sizeof(struct sd_dif_tuple),
+	.tag_size		= 0,
+};
+
+static struct blk_integrity dif_type3_integrity_ip = {
+	.name			= "T10-DIF-TYPE3-IP",
+	.generate_fn		= sd_dif_type3_generate_ip,
+	.verify_fn		= sd_dif_type3_verify_ip,
+	.get_tag_fn		= sd_dif_type3_get_tag,
+	.set_tag_fn		= sd_dif_type3_set_tag,
+	.tuple_size		= sizeof(struct sd_dif_tuple),
+	.tag_size		= 0,
+};
+
+/*
+ * Configure exchange of protection information between OS and HBA.
+ */
+void sd_dif_config_host(struct scsi_disk *sdkp)
+{
+	struct scsi_device *sdp = sdkp->device;
+	struct gendisk *disk = sdkp->disk;
+	u8 type = sdkp->protection_type;
+
+	/* If this HBA doesn't support DIX, resort to normal I/O or DIF */
+	if (scsi_host_dix_capable(sdp->host, type) == 0) {
+
+		if (type == SD_DIF_TYPE0_PROTECTION)
+			return;
+
+		if (scsi_host_dif_capable(sdp->host, type) == 0) {
+			sd_printk(KERN_INFO, sdkp, "Type %d protection " \
+				  "unsupported by HBA. Disabling DIF.\n", type);
+			sdkp->protection_type = 0;
+			return;
+		}
+
+		sd_printk(KERN_INFO, sdkp, "Enabling DIF Type %d protection\n",
+			  type);
+
+		return;
+	}
+
+	/* Enable DMA of protection information */
+	if (scsi_host_get_guard(sdkp->device->host) & SHOST_DIX_GUARD_IP)
+		if (type == SD_DIF_TYPE3_PROTECTION)
+			blk_integrity_register(disk, &dif_type3_integrity_ip);
+		else
+			blk_integrity_register(disk, &dif_type1_integrity_ip);
+	else
+		if (type == SD_DIF_TYPE3_PROTECTION)
+			blk_integrity_register(disk, &dif_type3_integrity_crc);
+		else
+			blk_integrity_register(disk, &dif_type1_integrity_crc);
+
+	sd_printk(KERN_INFO, sdkp,
+		  "Enabling %s integrity protection\n", disk->integrity->name);
+
+	/* Signal to block layer that we support sector tagging */
+	if (type && sdkp->ATO) {
+		if (type == SD_DIF_TYPE3_PROTECTION)
+			disk->integrity->tag_size = sizeof(u16) + sizeof(u32);
+		else
+			disk->integrity->tag_size = sizeof(u16);
+
+		sd_printk(KERN_INFO, sdkp, "DIF application tag size %u\n",
+			  disk->integrity->tag_size);
+	}
+}
+
+/*
+ * DIF DMA operation magic decoder ring.
+ */
+void sd_dif_op(struct scsi_cmnd *scmd, unsigned int dif, unsigned int dix)
+{
+	int csum_convert, prot_op;
+
+	prot_op = 0;
+
+	/* Convert checksum? */
+	if (scsi_host_get_guard(scmd->device->host) != SHOST_DIX_GUARD_CRC)
+		csum_convert = 1;
+	else
+		csum_convert = 0;
+
+	switch (scmd->cmnd[0]) {
+	case READ_10:
+	case READ_12:
+	case READ_16:
+		if (dif && dix)
+			if (csum_convert)
+				prot_op = SCSI_PROT_READ_CONVERT;
+			else
+				prot_op = SCSI_PROT_READ_PASS;
+		else if (dif && !dix)
+			prot_op = SCSI_PROT_READ_STRIP;
+		else if (!dif && dix)
+			prot_op = SCSI_PROT_READ_INSERT;
+
+		break;
+
+	case WRITE_10:
+	case WRITE_12:
+	case WRITE_16:
+		if (dif && dix)
+			if (csum_convert)
+				prot_op = SCSI_PROT_WRITE_CONVERT;
+			else
+				prot_op = SCSI_PROT_WRITE_PASS;
+		else if (dif && !dix)
+			prot_op = SCSI_PROT_WRITE_INSERT;
+		else if (!dif && dix)
+			prot_op = SCSI_PROT_WRITE_STRIP;
+
+		break;
+	}
+
+	scsi_set_prot_op(scmd, prot_op);
+	scsi_set_prot_type(scmd, dif);
+}
+
+/*
+ * The virtual start sector is the one that was originally submitted
+ * by the block layer.	Due to partitioning, MD/DM cloning, etc. the
+ * actual physical start sector is likely to be different.  Remap
+ * protection information to match the physical LBA.
+ *
+ * From a protocol perspective there's a slight difference between
+ * Type 1 and 2.  The latter uses 32-byte CDBs exclusively, and the
+ * reference tag is seeded in the CDB.  This gives us the potential to
+ * avoid virt->phys remapping during write.  However, at read time we
+ * don't know whether the virt sector is the same as when we wrote it
+ * (we could be reading from real disk as opposed to MD/DM device.  So
+ * we always remap Type 2 making it identical to Type 1.
+ *
+ * Type 3 does not have a reference tag so no remapping is required.
+ */
+int sd_dif_prepare(struct request *rq, sector_t hw_sector, unsigned int sector_sz)
+{
+	const int tuple_sz = sizeof(struct sd_dif_tuple);
+	struct bio *bio;
+	struct scsi_disk *sdkp;
+	struct sd_dif_tuple *sdt;
+	unsigned int i, j;
+	u32 phys, virt;
+
+	/* Already remapped? */
+	if (rq->cmd_flags & REQ_INTEGRITY)
+		return 0;
+
+	sdkp = rq->bio->bi_bdev->bd_disk->private_data;
+
+	if (sdkp->protection_type == SD_DIF_TYPE3_PROTECTION)
+		return 0;
+
+	rq->cmd_flags |= REQ_INTEGRITY;
+	phys = hw_sector & 0xffffffff;
+
+	__rq_for_each_bio(bio, rq) {
+		struct bio_vec *iv;
+
+		virt = bio->bi_integrity->bip_sector & 0xffffffff;
+
+		bip_for_each_vec(iv, bio->bi_integrity, i) {
+			sdt = kmap_atomic(iv->bv_page, KM_USER0)
+				+ iv->bv_offset;
+
+			for (j = 0 ; j < iv->bv_len ; j += tuple_sz, sdt++) {
+
+				if (be32_to_cpu(sdt->ref_tag) != virt)
+					goto error;
+
+				sdt->ref_tag = cpu_to_be32(phys);
+				virt++;
+				phys++;
+			}
+
+			kunmap_atomic(sdt, KM_USER0);
+		}
+	}
+
+	return 0;
+
+error:
+	kunmap_atomic(sdt, KM_USER0);
+	sd_printk(KERN_ERR, sdkp, "%s: virt %u, phys %u, ref %u\n",
+		  __func__, virt, phys, be32_to_cpu(sdt->ref_tag));
+
+	return -EIO;
+}
+
+/*
+ * Remap physical sector values in the reference tag to the virtual
+ * values expected by the block layer.
+ */
+void sd_dif_complete(struct scsi_cmnd *scmd, unsigned int good_bytes)
+{
+	const int tuple_sz = sizeof(struct sd_dif_tuple);
+	struct scsi_disk *sdkp;
+	struct bio *bio;
+	struct sd_dif_tuple *sdt;
+	unsigned int i, j, sectors, sector_sz;
+	u32 phys, virt;
+
+	sdkp = scsi_disk(scmd->request->rq_disk);
+
+	if (sdkp->protection_type == SD_DIF_TYPE3_PROTECTION || good_bytes == 0)
+		return;
+
+	sector_sz = scmd->device->sector_size;
+	sectors = good_bytes / sector_sz;
+
+	phys = scmd->request->sector & 0xffffffff;
+	if (sector_sz == 4096)
+		phys >>= 3;
+
+	__rq_for_each_bio(bio, scmd->request) {
+		struct bio_vec *iv;
+
+		virt = bio->bi_integrity->bip_sector & 0xffffffff;
+
+		bip_for_each_vec(iv, bio->bi_integrity, i) {
+			sdt = kmap_atomic(iv->bv_page, KM_USER0)
+				+ iv->bv_offset;
+
+			for (j = 0 ; j < iv->bv_len ; j += tuple_sz, sdt++) {
+
+				if (sectors == 0) {
+					kunmap_atomic(sdt, KM_USER0);
+					return;
+				}
+
+				if (be32_to_cpu(sdt->ref_tag) != phys &&
+				    sdt->app_tag != 0xffff)
+					sdt->ref_tag = 0xffffffff; /* Bad ref */
+				else
+					sdt->ref_tag = cpu_to_be32(virt);
+
+				virt++;
+				phys++;
+				sectors--;
+			}
+
+			kunmap_atomic(sdt, KM_USER0);
+		}
+	}
+}
+
diff --git a/drivers/scsi/ses.c b/drivers/scsi/ses.c
index 0fe031f003e7..1bcf3c33d7ff 100644
--- a/drivers/scsi/ses.c
+++ b/drivers/scsi/ses.c
@@ -345,14 +345,14 @@ static int ses_enclosure_find_by_addr(struct enclosure_device *edev,
 	return 0;
 }
 
-#define VPD_INQUIRY_SIZE 512
+#define VPD_INQUIRY_SIZE 36
 
 static void ses_match_to_enclosure(struct enclosure_device *edev,
 				   struct scsi_device *sdev)
 {
 	unsigned char *buf = kmalloc(VPD_INQUIRY_SIZE, GFP_KERNEL);
 	unsigned char *desc;
-	int len;
+	u16 vpd_len;
 	struct efd efd = {
 		.addr = 0,
 	};
@@ -372,9 +372,19 @@ static void ses_match_to_enclosure(struct enclosure_device *edev,
 			     VPD_INQUIRY_SIZE, NULL, SES_TIMEOUT, SES_RETRIES))
 		goto free;
 
-	len = (buf[2] << 8) + buf[3];
+	vpd_len = (buf[2] << 8) + buf[3];
+	kfree(buf);
+	buf = kmalloc(vpd_len, GFP_KERNEL);
+	if (!buf)
+		return;
+	cmd[3] = vpd_len >> 8;
+	cmd[4] = vpd_len & 0xff;
+	if (scsi_execute_req(sdev, cmd, DMA_FROM_DEVICE, buf,
+			     vpd_len, NULL, SES_TIMEOUT, SES_RETRIES))
+		goto free;
+
 	desc = buf + 4;
-	while (desc < buf + len) {
+	while (desc < buf + vpd_len) {
 		enum scsi_protocol proto = desc[0] >> 4;
 		u8 code_set = desc[0] & 0x0f;
 		u8 piv = desc[1] & 0x80;
diff --git a/drivers/scsi/sg.c b/drivers/scsi/sg.c
index d3b8ebb83776..661f9f21650a 100644
--- a/drivers/scsi/sg.c
+++ b/drivers/scsi/sg.c
@@ -217,6 +217,18 @@ static int sg_last_dev(void);
 #define SZ_SG_IOVEC sizeof(sg_iovec_t)
 #define SZ_SG_REQ_INFO sizeof(sg_req_info_t)
 
+static int sg_allow_access(struct file *filp, unsigned char *cmd)
+{
+	struct sg_fd *sfp = (struct sg_fd *)filp->private_data;
+	struct request_queue *q = sfp->parentdp->device->request_queue;
+
+	if (sfp->parentdp->device->type == TYPE_SCANNER)
+		return 0;
+
+	return blk_verify_command(&q->cmd_filter,
+				  cmd, filp->f_mode & FMODE_WRITE);
+}
+
 static int
 sg_open(struct inode *inode, struct file *filp)
 {
@@ -689,7 +701,7 @@ sg_new_write(Sg_fd *sfp, struct file *file, const char __user *buf,
 		sg_remove_request(sfp, srp);
 		return -EFAULT;
 	}
-	if (read_only && !blk_verify_command(file, cmnd)) {
+	if (read_only && sg_allow_access(file, cmnd)) {
 		sg_remove_request(sfp, srp);
 		return -EPERM;
 	}
@@ -793,6 +805,7 @@ sg_ioctl(struct inode *inode, struct file *filp,
 
 	if ((!(sfp = (Sg_fd *) filp->private_data)) || (!(sdp = sfp->parentdp)))
 		return -ENXIO;
+
 	SCSI_LOG_TIMEOUT(3, printk("sg_ioctl: %s, cmd=0x%x\n",
 				   sdp->disk->disk_name, (int) cmd_in));
 	read_only = (O_RDWR != (filp->f_flags & O_ACCMODE));
@@ -1061,7 +1074,7 @@ sg_ioctl(struct inode *inode, struct file *filp,
 
 			if (copy_from_user(&opcode, siocp->data, 1))
 				return -EFAULT;
-			if (!blk_verify_command(filp, &opcode))
+			if (sg_allow_access(filp, &opcode))
 				return -EPERM;
 		}
 		return sg_scsi_ioctl(filp, sdp->device->request_queue, NULL, p);
@@ -1747,7 +1760,7 @@ st_map_user_pages(struct scatterlist *sgl, const unsigned int max_pages,
                  */
 		flush_dcache_page(pages[i]);
 		/* ?? Is locking needed? I don't think so */
-		/* if (TestSetPageLocked(pages[i]))
+		/* if (!trylock_page(pages[i]))
 		   goto out_unlock; */
         }
 
diff --git a/drivers/scsi/sr.c b/drivers/scsi/sr.c
index 27f5bfd1def3..3292965bfd84 100644
--- a/drivers/scsi/sr.c
+++ b/drivers/scsi/sr.c
@@ -656,6 +656,7 @@ static int sr_probe(struct device *dev)
 	dev_set_drvdata(dev, cd);
 	disk->flags |= GENHD_FL_REMOVABLE;
 	add_disk(disk);
+	blk_register_filter(disk);
 
 	sdev_printk(KERN_DEBUG, sdev,
 		    "Attached scsi CD-ROM %s\n", cd->cdi.name);
@@ -894,6 +895,7 @@ static int sr_remove(struct device *dev)
 {
 	struct scsi_cd *cd = dev_get_drvdata(dev);
 
+	blk_unregister_filter(cd->disk);
 	del_gendisk(cd->disk);
 
 	mutex_lock(&sr_ref_mutex);
diff --git a/drivers/scsi/st.c b/drivers/scsi/st.c
index 4684cc716aa4..c2bb53e3d941 100644
--- a/drivers/scsi/st.c
+++ b/drivers/scsi/st.c
@@ -17,7 +17,7 @@
    Last modified: 18-JAN-1998 Richard Gooch <rgooch@atnf.csiro.au> Devfs support
  */
 
-static const char *verstr = "20080224";
+static const char *verstr = "20080504";
 
 #include <linux/module.h>
 
@@ -631,7 +631,7 @@ static int cross_eof(struct scsi_tape * STp, int forward)
 /* Flush the write buffer (never need to write if variable blocksize). */
 static int st_flush_write_buffer(struct scsi_tape * STp)
 {
-	int offset, transfer, blks;
+	int transfer, blks;
 	int result;
 	unsigned char cmd[MAX_COMMAND_SIZE];
 	struct st_request *SRpnt;
@@ -644,14 +644,10 @@ static int st_flush_write_buffer(struct scsi_tape * STp)
 	result = 0;
 	if (STp->dirty == 1) {
 
-		offset = (STp->buffer)->buffer_bytes;
-		transfer = ((offset + STp->block_size - 1) /
-			    STp->block_size) * STp->block_size;
+		transfer = STp->buffer->buffer_bytes;
                 DEBC(printk(ST_DEB_MSG "%s: Flushing %d bytes.\n",
                                tape_name(STp), transfer));
 
-		memset((STp->buffer)->b_data + offset, 0, transfer - offset);
-
 		memset(cmd, 0, MAX_COMMAND_SIZE);
 		cmd[0] = WRITE_6;
 		cmd[1] = 1;
@@ -1670,6 +1666,7 @@ st_write(struct file *filp, const char __user *buf, size_t count, loff_t * ppos)
 				if (undone <= do_count) {
 					/* Only data from this write is not written */
 					count += undone;
+					b_point -= undone;
 					do_count -= undone;
 					if (STp->block_size)
 						blks = (transfer - undone) / STp->block_size;
diff --git a/drivers/scsi/stex.c b/drivers/scsi/stex.c
index f308a0308829..3790906a77d1 100644
--- a/drivers/scsi/stex.c
+++ b/drivers/scsi/stex.c
@@ -467,7 +467,7 @@ stex_slave_alloc(struct scsi_device *sdev)
 	/* Cheat: usually extracted from Inquiry data */
 	sdev->tagged_supported = 1;
 
-	scsi_activate_tcq(sdev, sdev->host->can_queue);
+	scsi_activate_tcq(sdev, ST_CMD_PER_LUN);
 
 	return 0;
 }
diff --git a/drivers/scsi/sym53c8xx_2/sym_hipd.c b/drivers/scsi/sym53c8xx_2/sym_hipd.c
index 22a6aae78699..98df1651404f 100644
--- a/drivers/scsi/sym53c8xx_2/sym_hipd.c
+++ b/drivers/scsi/sym53c8xx_2/sym_hipd.c
@@ -5741,6 +5741,8 @@ void sym_hcb_free(struct sym_hcb *np)
 
 	for (target = 0; target < SYM_CONF_MAX_TARGET ; target++) {
 		tp = &np->target[target];
+		if (tp->luntbl)
+			sym_mfree_dma(tp->luntbl, 256, "LUNTBL");
 #if SYM_CONF_MAX_LUN > 1
 		kfree(tp->lunmp);
 #endif 
diff --git a/drivers/scsi/tmscsim.c b/drivers/scsi/tmscsim.c
index 5b04ddfed26c..1723d71cbf3f 100644
--- a/drivers/scsi/tmscsim.c
+++ b/drivers/scsi/tmscsim.c
@@ -452,7 +452,7 @@ static int dc390_pci_map (struct dc390_srb* pSRB)
 		/* TODO: error handling */
 		if (pSRB->SGcount != 1)
 			error = 1;
-		DEBUG1(printk("%s(): Mapped sense buffer %p at %x\n", __FUNCTION__, pcmd->sense_buffer, cmdp->saved_dma_handle));
+		DEBUG1(printk("%s(): Mapped sense buffer %p at %x\n", __func__, pcmd->sense_buffer, cmdp->saved_dma_handle));
 	/* Map SG list */
 	} else if (scsi_sg_count(pcmd)) {
 		int nseg;
@@ -466,7 +466,7 @@ static int dc390_pci_map (struct dc390_srb* pSRB)
 		if (nseg < 0)
 			error = 1;
 		DEBUG1(printk("%s(): Mapped SG %p with %d (%d) elements\n",\
-			      __FUNCTION__, scsi_sglist(pcmd), nseg, scsi_sg_count(pcmd)));
+			      __func__, scsi_sglist(pcmd), nseg, scsi_sg_count(pcmd)));
 	/* Map single segment */
 	} else
 		pSRB->SGcount = 0;
@@ -483,11 +483,11 @@ static void dc390_pci_unmap (struct dc390_srb* pSRB)
 
 	if (pSRB->SRBFlag) {
 		pci_unmap_sg(pdev, &pSRB->Segmentx, 1, DMA_FROM_DEVICE);
-		DEBUG1(printk("%s(): Unmapped sense buffer at %x\n", __FUNCTION__, cmdp->saved_dma_handle));
+		DEBUG1(printk("%s(): Unmapped sense buffer at %x\n", __func__, cmdp->saved_dma_handle));
 	} else {
 		scsi_dma_unmap(pcmd);
 		DEBUG1(printk("%s(): Unmapped SG at %p with %d elements\n",
-			      __FUNCTION__, scsi_sglist(pcmd), scsi_sg_count(pcmd)));
+			      __func__, scsi_sglist(pcmd), scsi_sg_count(pcmd)));
 	}
 }
 
diff --git a/drivers/scsi/wd7000.c b/drivers/scsi/wd7000.c
index c975c01b3a02..d4c13561f4a6 100644
--- a/drivers/scsi/wd7000.c
+++ b/drivers/scsi/wd7000.c
@@ -148,7 +148,7 @@
  *
  * 2002/10/04 - Alan Cox <alan@redhat.com>
  *
- * Use dev_id for interrupts, kill __FUNCTION__ pasting
+ * Use dev_id for interrupts, kill __func__ pasting
  * Add a lock for the scb pool, clean up all other cli/sti usage stuff
  * Use the adapter lock for the other places we had the cli's
  *
@@ -640,12 +640,12 @@ static int __init wd7000_setup(char *str)
 	(void) get_options(str, ARRAY_SIZE(ints), ints);
 
 	if (wd7000_card_num >= NUM_CONFIGS) {
-		printk(KERN_ERR "%s: Too many \"wd7000=\" configurations in " "command line!\n", __FUNCTION__);
+		printk(KERN_ERR "%s: Too many \"wd7000=\" configurations in " "command line!\n", __func__);
 		return 0;
 	}
 
 	if ((ints[0] < 3) || (ints[0] > 5)) {
-		printk(KERN_ERR "%s: Error in command line!  " "Usage: wd7000=<IRQ>,<DMA>,IO>[,<BUS_ON>" "[,<BUS_OFF>]]\n", __FUNCTION__);
+		printk(KERN_ERR "%s: Error in command line!  " "Usage: wd7000=<IRQ>,<DMA>,IO>[,<BUS_ON>" "[,<BUS_OFF>]]\n", __func__);
 	} else {
 		for (i = 0; i < NUM_IRQS; i++)
 			if (ints[1] == wd7000_irq[i])
@@ -1642,7 +1642,7 @@ static int wd7000_biosparam(struct scsi_device *sdev,
 			ip[2] = info[2];
 
 			if (info[0] == 255)
-				printk(KERN_INFO "%s: current partition table is " "using extended translation.\n", __FUNCTION__);
+				printk(KERN_INFO "%s: current partition table is " "using extended translation.\n", __func__);
 		}
 	}
 
diff --git a/drivers/scsi/zalon.c b/drivers/scsi/zalon.c
index 4b5f908d35c3..3c4a300494a4 100644
--- a/drivers/scsi/zalon.c
+++ b/drivers/scsi/zalon.c
@@ -68,11 +68,11 @@ lasi_scsi_clock(void * hpa, int defaultclock)
 	if (status == PDC_RET_OK) {
 		clock = (int) pdc_result[16];
 	} else {
-		printk(KERN_WARNING "%s: pdc_iodc_read returned %d\n", __FUNCTION__, status);
+		printk(KERN_WARNING "%s: pdc_iodc_read returned %d\n", __func__, status);
 		clock = defaultclock; 
 	}
 
-	printk(KERN_DEBUG "%s: SCSI clock %d\n", __FUNCTION__, clock);
+	printk(KERN_DEBUG "%s: SCSI clock %d\n", __func__, clock);
  	return clock;
 }
 #endif
@@ -108,13 +108,13 @@ zalon_probe(struct parisc_device *dev)
 	*/
 	dev->irq = gsc_alloc_irq(&gsc_irq);
 
-	printk(KERN_INFO "%s: Zalon version %d, IRQ %d\n", __FUNCTION__,
+	printk(KERN_INFO "%s: Zalon version %d, IRQ %d\n", __func__,
 		zalon_vers, dev->irq);
 
 	__raw_writel(gsc_irq.txn_addr | gsc_irq.txn_data, zalon + IO_MODULE_EIM);
 
 	if (zalon_vers == 0)
-		printk(KERN_WARNING "%s: Zalon 1.1 or earlier\n", __FUNCTION__);
+		printk(KERN_WARNING "%s: Zalon 1.1 or earlier\n", __func__);
 
 	memset(&device, 0, sizeof(struct ncr_device));
 
diff --git a/drivers/serial/21285.c b/drivers/serial/21285.c
index 6558a4037806..f31c6698419c 100644
--- a/drivers/serial/21285.c
+++ b/drivers/serial/21285.c
@@ -19,7 +19,7 @@
 #include <asm/irq.h>
 #include <asm/mach-types.h>
 #include <asm/hardware/dec21285.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 
 #define BAUD_BASE		(mem_fclk_21285/64)
 
diff --git a/drivers/serial/8250.c b/drivers/serial/8250.c
index a97f1ae11f78..9ccc563d8730 100644
--- a/drivers/serial/8250.c
+++ b/drivers/serial/8250.c
@@ -1885,7 +1885,7 @@ static int serial8250_startup(struct uart_port *port)
 		 * the interrupt is enabled.  Delays are necessary to
 		 * allow register changes to become visible.
 		 */
-		spin_lock(&up->port.lock);
+		spin_lock_irqsave(&up->port.lock, flags);
 		if (up->port.flags & UPF_SHARE_IRQ)
 			disable_irq_nosync(up->port.irq);
 
@@ -1901,22 +1901,30 @@ static int serial8250_startup(struct uart_port *port)
 
 		if (up->port.flags & UPF_SHARE_IRQ)
 			enable_irq(up->port.irq);
-		spin_unlock(&up->port.lock);
+		spin_unlock_irqrestore(&up->port.lock, flags);
 
 		/*
 		 * If the interrupt is not reasserted, setup a timer to
 		 * kick the UART on a regular basis.
 		 */
 		if (!(iir1 & UART_IIR_NO_INT) && (iir & UART_IIR_NO_INT)) {
+			up->bugs |= UART_BUG_THRE;
 			pr_debug("ttyS%d - using backup timer\n", port->line);
-			up->timer.function = serial8250_backup_timeout;
-			up->timer.data = (unsigned long)up;
-			mod_timer(&up->timer, jiffies +
-				poll_timeout(up->port.timeout) + HZ / 5);
 		}
 	}
 
 	/*
+	 * The above check will only give an accurate result the first time
+	 * the port is opened so this value needs to be preserved.
+	 */
+	if (up->bugs & UART_BUG_THRE) {
+		up->timer.function = serial8250_backup_timeout;
+		up->timer.data = (unsigned long)up;
+		mod_timer(&up->timer, jiffies +
+			  poll_timeout(up->port.timeout) + HZ / 5);
+	}
+
+	/*
 	 * If the "interrupt" for this port doesn't correspond with any
 	 * hardware interrupt, we use a timer-based system.  The original
 	 * driver used to do this with IRQ0.
diff --git a/drivers/serial/8250.h b/drivers/serial/8250.h
index 78c00162b04e..520260326f3d 100644
--- a/drivers/serial/8250.h
+++ b/drivers/serial/8250.h
@@ -47,6 +47,7 @@ struct serial8250_config {
 #define UART_BUG_QUOT	(1 << 0)	/* UART has buggy quot LSB */
 #define UART_BUG_TXEN	(1 << 1)	/* UART has buggy TX IIR status */
 #define UART_BUG_NOMSR	(1 << 2)	/* UART has buggy MSR status bits (Au1x00) */
+#define UART_BUG_THRE	(1 << 3)	/* UART has buggy THRE reassertion */
 
 #define PROBE_RSA	(1 << 0)
 #define PROBE_ANY	(~0)
diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig
index 3b4a14e355c1..77cb34270fc1 100644
--- a/drivers/serial/Kconfig
+++ b/drivers/serial/Kconfig
@@ -449,6 +449,7 @@ config SERIAL_CLPS711X_CONSOLE
 config SERIAL_SAMSUNG
 	tristate "Samsung SoC serial support"
 	depends on ARM && PLAT_S3C24XX
+	select SERIAL_CORE
 	help
 	  Support for the on-chip UARTs on the Samsung S3C24XX series CPUs,
 	  providing /dev/ttySAC0, 1 and 2 (note, some machines may not
diff --git a/drivers/serial/Makefile b/drivers/serial/Makefile
index 3a0bbbe17aa3..7e7383e890d8 100644
--- a/drivers/serial/Makefile
+++ b/drivers/serial/Makefile
@@ -42,7 +42,6 @@ obj-$(CONFIG_SERIAL_68328) += 68328serial.o
 obj-$(CONFIG_SERIAL_68360) += 68360serial.o
 obj-$(CONFIG_SERIAL_COLDFIRE) += mcfserial.o
 obj-$(CONFIG_SERIAL_MCF) += mcf.o
-obj-$(CONFIG_V850E_UART) += v850e_uart.o
 obj-$(CONFIG_SERIAL_PMACZILOG) += pmac_zilog.o
 obj-$(CONFIG_SERIAL_LH7A40X) += serial_lh7a40x.o
 obj-$(CONFIG_SERIAL_DZ) += dz.o
diff --git a/drivers/serial/atmel_serial.c b/drivers/serial/atmel_serial.c
index 1fee12c1f4f8..3a6da80b081c 100644
--- a/drivers/serial/atmel_serial.c
+++ b/drivers/serial/atmel_serial.c
@@ -42,11 +42,11 @@
 #include <asm/io.h>
 
 #include <asm/mach/serial_at91.h>
-#include <asm/arch/board.h>
+#include <mach/board.h>
 
 #ifdef CONFIG_ARM
-#include <asm/arch/cpu.h>
-#include <asm/arch/gpio.h>
+#include <mach/cpu.h>
+#include <mach/gpio.h>
 #endif
 
 #define PDC_BUFFER_SIZE		512
diff --git a/drivers/serial/bfin_5xx.c b/drivers/serial/bfin_5xx.c
index 9d8543762a30..4a0d30bed9f1 100644
--- a/drivers/serial/bfin_5xx.c
+++ b/drivers/serial/bfin_5xx.c
@@ -28,7 +28,7 @@
 #endif
 
 #include <asm/gpio.h>
-#include <asm/mach/bfin_serial_5xx.h>
+#include <mach/bfin_serial_5xx.h>
 
 #ifdef CONFIG_SERIAL_BFIN_DMA
 #include <linux/dma-mapping.h>
@@ -817,7 +817,7 @@ static void bfin_serial_set_ldisc(struct uart_port *port)
 	if (line >= port->info->port.tty->driver->num)
 		return;
 
-	switch (port->info->port.tty->ldisc.num) {
+	switch (port->info->port.tty->termios->c_line) {
 	case N_IRDA:
 		val = UART_GET_GCTL(&bfin_serial_ports[line]);
 		val |= (IREN | RPOLC);
diff --git a/drivers/serial/clps711x.c b/drivers/serial/clps711x.c
index fc1fa9267c59..459f3420a429 100644
--- a/drivers/serial/clps711x.c
+++ b/drivers/serial/clps711x.c
@@ -39,7 +39,7 @@
 #include <linux/serial_core.h>
 #include <linux/serial.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 #include <asm/irq.h>
 #include <asm/hardware/clps7111.h>
diff --git a/drivers/serial/cpm_uart/cpm_uart.h b/drivers/serial/cpm_uart/cpm_uart.h
index 5c76e0ae0582..7274b527a3c1 100644
--- a/drivers/serial/cpm_uart/cpm_uart.h
+++ b/drivers/serial/cpm_uart/cpm_uart.h
@@ -50,6 +50,15 @@
 
 #define SCC_WAIT_CLOSING 100
 
+#define GPIO_CTS	0
+#define GPIO_RTS	1
+#define GPIO_DCD	2
+#define GPIO_DSR	3
+#define GPIO_DTR	4
+#define GPIO_RI		5
+
+#define NUM_GPIOS	(GPIO_RI+1)
+
 struct uart_cpm_port {
 	struct uart_port	port;
 	u16			rx_nrfifos;
@@ -68,6 +77,7 @@ struct uart_cpm_port {
 	unsigned char		*rx_buf;
 	u32			flags;
 	void			(*set_lineif)(struct uart_cpm_port *);
+	struct clk		*clk;
 	u8			brg;
 	uint			 dp_addr;
 	void			*mem_addr;
@@ -82,6 +92,7 @@ struct uart_cpm_port {
 	int			wait_closing;
 	/* value to combine with opcode to form cpm command */
 	u32			command;
+	int			gpios[NUM_GPIOS];
 };
 
 extern int cpm_uart_nr;
diff --git a/drivers/serial/cpm_uart/cpm_uart_core.c b/drivers/serial/cpm_uart/cpm_uart_core.c
index a4f86927a74b..25efca5a7a1f 100644
--- a/drivers/serial/cpm_uart/cpm_uart_core.c
+++ b/drivers/serial/cpm_uart/cpm_uart_core.c
@@ -43,6 +43,9 @@
 #include <linux/dma-mapping.h>
 #include <linux/fs_uart_pd.h>
 #include <linux/of_platform.h>
+#include <linux/gpio.h>
+#include <linux/of_gpio.h>
+#include <linux/clk.h>
 
 #include <asm/io.h>
 #include <asm/irq.h>
@@ -96,13 +99,41 @@ static unsigned int cpm_uart_tx_empty(struct uart_port *port)
 
 static void cpm_uart_set_mctrl(struct uart_port *port, unsigned int mctrl)
 {
-	/* Whee. Do nothing. */
+	struct uart_cpm_port *pinfo = (struct uart_cpm_port *)port;
+
+	if (pinfo->gpios[GPIO_RTS] >= 0)
+		gpio_set_value(pinfo->gpios[GPIO_RTS], !(mctrl & TIOCM_RTS));
+
+	if (pinfo->gpios[GPIO_DTR] >= 0)
+		gpio_set_value(pinfo->gpios[GPIO_DTR], !(mctrl & TIOCM_DTR));
 }
 
 static unsigned int cpm_uart_get_mctrl(struct uart_port *port)
 {
-	/* Whee. Do nothing. */
-	return TIOCM_CAR | TIOCM_DSR | TIOCM_CTS;
+	struct uart_cpm_port *pinfo = (struct uart_cpm_port *)port;
+	unsigned int mctrl = TIOCM_CTS | TIOCM_DSR | TIOCM_CAR;
+
+	if (pinfo->gpios[GPIO_CTS] >= 0) {
+		if (gpio_get_value(pinfo->gpios[GPIO_CTS]))
+			mctrl &= ~TIOCM_CTS;
+	}
+
+	if (pinfo->gpios[GPIO_DSR] >= 0) {
+		if (gpio_get_value(pinfo->gpios[GPIO_DSR]))
+			mctrl &= ~TIOCM_DSR;
+	}
+
+	if (pinfo->gpios[GPIO_DCD] >= 0) {
+		if (gpio_get_value(pinfo->gpios[GPIO_DCD]))
+			mctrl &= ~TIOCM_CAR;
+	}
+
+	if (pinfo->gpios[GPIO_RI] >= 0) {
+		if (!gpio_get_value(pinfo->gpios[GPIO_RI]))
+			mctrl |= TIOCM_RNG;
+	}
+
+	return mctrl;
 }
 
 /*
@@ -566,7 +597,10 @@ static void cpm_uart_set_termios(struct uart_port *port,
 		out_be16(&sccp->scc_psmr, (sbits << 12) | scval);
 	}
 
-	cpm_set_brg(pinfo->brg - 1, baud);
+	if (pinfo->clk)
+		clk_set_rate(pinfo->clk, baud);
+	else
+		cpm_set_brg(pinfo->brg - 1, baud);
 	spin_unlock_irqrestore(&port->lock, flags);
 }
 
@@ -991,14 +1025,23 @@ static int cpm_uart_init_port(struct device_node *np,
 	void __iomem *mem, *pram;
 	int len;
 	int ret;
+	int i;
 
-	data = of_get_property(np, "fsl,cpm-brg", &len);
-	if (!data || len != 4) {
-		printk(KERN_ERR "CPM UART %s has no/invalid "
-		                "fsl,cpm-brg property.\n", np->name);
-		return -EINVAL;
+	data = of_get_property(np, "clock", NULL);
+	if (data) {
+		struct clk *clk = clk_get(NULL, (const char*)data);
+		if (!IS_ERR(clk))
+			pinfo->clk = clk;
+	}
+	if (!pinfo->clk) {
+		data = of_get_property(np, "fsl,cpm-brg", &len);
+		if (!data || len != 4) {
+			printk(KERN_ERR "CPM UART %s has no/invalid "
+			                "fsl,cpm-brg property.\n", np->name);
+			return -EINVAL;
+		}
+		pinfo->brg = *data;
 	}
-	pinfo->brg = *data;
 
 	data = of_get_property(np, "fsl,cpm-command", &len);
 	if (!data || len != 4) {
@@ -1050,6 +1093,9 @@ static int cpm_uart_init_port(struct device_node *np,
 		goto out_pram;
 	}
 
+	for (i = 0; i < NUM_GPIOS; i++)
+		pinfo->gpios[i] = of_get_gpio(np, i);
+
 	return cpm_uart_request_port(&pinfo->port);
 
 out_pram:
diff --git a/drivers/serial/crisv10.c b/drivers/serial/crisv10.c
index 8249ac490559..bf94a770bb44 100644
--- a/drivers/serial/crisv10.c
+++ b/drivers/serial/crisv10.c
@@ -234,7 +234,7 @@ unsigned long r_alt_ser_baudrate_shadow = 0;
 
 static struct e100_serial rs_table[] = {
 	{ .baud        = DEF_BAUD,
-	  .port        = (unsigned char *)R_SERIAL0_CTRL,
+	  .ioport        = (unsigned char *)R_SERIAL0_CTRL,
 	  .irq         = 1U << 12, /* uses DMA 6 and 7 */
 	  .oclrintradr = R_DMA_CH6_CLR_INTR,
 	  .ofirstadr   = R_DMA_CH6_FIRST,
@@ -288,7 +288,7 @@ static struct e100_serial rs_table[] = {
 },  /* ttyS0 */
 #ifndef CONFIG_SVINTO_SIM
 	{ .baud        = DEF_BAUD,
-	  .port        = (unsigned char *)R_SERIAL1_CTRL,
+	  .ioport        = (unsigned char *)R_SERIAL1_CTRL,
 	  .irq         = 1U << 16, /* uses DMA 8 and 9 */
 	  .oclrintradr = R_DMA_CH8_CLR_INTR,
 	  .ofirstadr   = R_DMA_CH8_FIRST,
@@ -344,7 +344,7 @@ static struct e100_serial rs_table[] = {
 },  /* ttyS1 */
 
 	{ .baud        = DEF_BAUD,
-	  .port        = (unsigned char *)R_SERIAL2_CTRL,
+	  .ioport        = (unsigned char *)R_SERIAL2_CTRL,
 	  .irq         = 1U << 4,  /* uses DMA 2 and 3 */
 	  .oclrintradr = R_DMA_CH2_CLR_INTR,
 	  .ofirstadr   = R_DMA_CH2_FIRST,
@@ -398,7 +398,7 @@ static struct e100_serial rs_table[] = {
  },  /* ttyS2 */
 
 	{ .baud        = DEF_BAUD,
-	  .port        = (unsigned char *)R_SERIAL3_CTRL,
+	  .ioport        = (unsigned char *)R_SERIAL3_CTRL,
 	  .irq         = 1U << 8,  /* uses DMA 4 and 5 */
 	  .oclrintradr = R_DMA_CH4_CLR_INTR,
 	  .ofirstadr   = R_DMA_CH4_FIRST,
@@ -939,7 +939,7 @@ static const struct control_pins e100_modem_pins[NR_PORTS] =
 /* Output */
 #define E100_RTS_GET(info) ((info)->rx_ctrl & E100_RTS_MASK)
 /* Input */
-#define E100_CTS_GET(info) ((info)->port[REG_STATUS] & E100_CTS_MASK)
+#define E100_CTS_GET(info) ((info)->ioport[REG_STATUS] & E100_CTS_MASK)
 
 /* These are typically PA or PB and 0 means 0V, 1 means 3.3V */
 /* Is an output */
@@ -1092,7 +1092,7 @@ e100_rts(struct e100_serial *info, int set)
 	local_irq_save(flags);
 	info->rx_ctrl &= ~E100_RTS_MASK;
 	info->rx_ctrl |= (set ? 0 : E100_RTS_MASK);  /* RTS is active low */
-	info->port[REG_REC_CTRL] = info->rx_ctrl;
+	info->ioport[REG_REC_CTRL] = info->rx_ctrl;
 	local_irq_restore(flags);
 #ifdef SERIAL_DEBUG_IO
 	printk("ser%i rts %i\n", info->line, set);
@@ -1142,7 +1142,7 @@ e100_disable_rx(struct e100_serial *info)
 {
 #ifndef CONFIG_SVINTO_SIM
 	/* disable the receiver */
-	info->port[REG_REC_CTRL] =
+	info->ioport[REG_REC_CTRL] =
 		(info->rx_ctrl &= ~IO_MASK(R_SERIAL0_REC_CTRL, rec_enable));
 #endif
 }
@@ -1152,7 +1152,7 @@ e100_enable_rx(struct e100_serial *info)
 {
 #ifndef CONFIG_SVINTO_SIM
 	/* enable the receiver */
-	info->port[REG_REC_CTRL] =
+	info->ioport[REG_REC_CTRL] =
 		(info->rx_ctrl |= IO_MASK(R_SERIAL0_REC_CTRL, rec_enable));
 #endif
 }
@@ -1490,7 +1490,7 @@ rs_stop(struct tty_struct *tty)
 			xoff |= IO_STATE(R_SERIAL0_XOFF, auto_xoff, enable);
 		}
 
-		*((unsigned long *)&info->port[REG_XOFF]) = xoff;
+		*((unsigned long *)&info->ioport[REG_XOFF]) = xoff;
 		local_irq_restore(flags);
 	}
 }
@@ -1513,7 +1513,7 @@ rs_start(struct tty_struct *tty)
 			xoff |= IO_STATE(R_SERIAL0_XOFF, auto_xoff, enable);
 		}
 
-		*((unsigned long *)&info->port[REG_XOFF]) = xoff;
+		*((unsigned long *)&info->ioport[REG_XOFF]) = xoff;
 		if (!info->uses_dma_out &&
 		    info->xmit.head != info->xmit.tail && info->xmit.buf)
 			e100_enable_serial_tx_ready_irq(info);
@@ -1888,7 +1888,7 @@ static void receive_chars_dma(struct e100_serial *info)
 	handle_all_descr_data(info);
 
 	/* Read the status register to detect errors */
-	rstat = info->port[REG_STATUS];
+	rstat = info->ioport[REG_STATUS];
 	if (rstat & IO_MASK(R_SERIAL0_STATUS, xoff_detect) ) {
 		DFLOW(DEBUG_LOG(info->line, "XOFF detect stat %x\n", rstat));
 	}
@@ -1897,7 +1897,7 @@ static void receive_chars_dma(struct e100_serial *info)
 		/* If we got an error, we must reset it by reading the
 		 * data_in field
 		 */
-		unsigned char data = info->port[REG_DATA];
+		unsigned char data = info->ioport[REG_DATA];
 
 		PROCSTAT(ser_stat[info->line].errors_cnt++);
 		DEBUG_LOG(info->line, "#dERR: s d 0x%04X\n",
@@ -2077,7 +2077,7 @@ static int force_eop_if_needed(struct e100_serial *info)
 	/* We check data_avail bit to determine if data has
 	 * arrived since last time
 	 */
-	unsigned char rstat = info->port[REG_STATUS];
+	unsigned char rstat = info->ioport[REG_STATUS];
 
 	/* error or datavail? */
 	if (rstat & SER_ERROR_MASK) {
@@ -2096,7 +2096,7 @@ static int force_eop_if_needed(struct e100_serial *info)
 		TIMERD(DEBUG_LOG(info->line, "timeout: rstat 0x%03X\n",
 		          rstat | (info->line << 8)));
 		/* Read data to clear status flags */
-		(void)info->port[REG_DATA];
+		(void)info->ioport[REG_DATA];
 
 		info->forced_eop = 0;
 		START_FLUSH_FAST_TIMER(info, "magic");
@@ -2296,7 +2296,7 @@ struct e100_serial * handle_ser_rx_interrupt_no_dma(struct e100_serial *info)
 	}
 
 	/* Read data and status at the same time */
-	data_read = *((unsigned long *)&info->port[REG_DATA_STATUS32]);
+	data_read = *((unsigned long *)&info->ioport[REG_DATA_STATUS32]);
 more_data:
 	if (data_read & IO_MASK(R_SERIAL0_READ, xoff_detect) ) {
 		DFLOW(DEBUG_LOG(info->line, "XOFF detect\n", 0));
@@ -2391,7 +2391,7 @@ more_data:
 
 
 	info->icount.rx++;
-	data_read = *((unsigned long *)&info->port[REG_DATA_STATUS32]);
+	data_read = *((unsigned long *)&info->ioport[REG_DATA_STATUS32]);
 	if (data_read & IO_MASK(R_SERIAL0_READ, data_avail)) {
 		DEBUG_LOG(info->line, "ser_rx   %c in loop\n", IO_EXTRACT(R_SERIAL0_READ, data_in, data_read));
 		goto more_data;
@@ -2413,7 +2413,7 @@ static struct e100_serial* handle_ser_rx_interrupt(struct e100_serial *info)
 		return handle_ser_rx_interrupt_no_dma(info);
 	}
 	/* DMA is used */
-	rstat = info->port[REG_STATUS];
+	rstat = info->ioport[REG_STATUS];
 	if (rstat & IO_MASK(R_SERIAL0_STATUS, xoff_detect) ) {
 		DFLOW(DEBUG_LOG(info->line, "XOFF detect\n", 0));
 	}
@@ -2426,7 +2426,7 @@ static struct e100_serial* handle_ser_rx_interrupt(struct e100_serial *info)
 		/* If we got an error, we must reset it by reading the
 		 * data_in field
 		 */
-		data = info->port[REG_DATA];
+		data = info->ioport[REG_DATA];
 		DINTR1(DEBUG_LOG(info->line, "ser_rx!  %c\n", data));
 		DINTR1(DEBUG_LOG(info->line, "ser_rx err stat %02X\n", rstat));
 		if (!data && (rstat & SER_FRAMING_ERR_MASK)) {
@@ -2528,10 +2528,10 @@ static void handle_ser_tx_interrupt(struct e100_serial *info)
 		unsigned char rstat;
 		DFLOW(DEBUG_LOG(info->line, "tx_int: xchar 0x%02X\n", info->x_char));
 		local_irq_save(flags);
-		rstat = info->port[REG_STATUS];
+		rstat = info->ioport[REG_STATUS];
 		DFLOW(DEBUG_LOG(info->line, "stat %x\n", rstat));
 
-		info->port[REG_TR_DATA] = info->x_char;
+		info->ioport[REG_TR_DATA] = info->x_char;
 		info->icount.tx++;
 		info->x_char = 0;
 		/* We must enable since it is disabled in ser_interrupt */
@@ -2545,7 +2545,7 @@ static void handle_ser_tx_interrupt(struct e100_serial *info)
 		/* We only use normal tx interrupt when sending x_char */
 		DFLOW(DEBUG_LOG(info->line, "tx_int: xchar sent\n", 0));
 		local_irq_save(flags);
-		rstat = info->port[REG_STATUS];
+		rstat = info->ioport[REG_STATUS];
 		DFLOW(DEBUG_LOG(info->line, "stat %x\n", rstat));
 		e100_disable_serial_tx_ready_irq(info);
 		if (info->port.tty->stopped)
@@ -2573,7 +2573,7 @@ static void handle_ser_tx_interrupt(struct e100_serial *info)
 	DINTR2(DEBUG_LOG(info->line, "tx_int %c\n", info->xmit.buf[info->xmit.tail]));
 	/* Send a byte, rs485 timing is critical so turn of ints */
 	local_irq_save(flags);
-	info->port[REG_TR_DATA] = info->xmit.buf[info->xmit.tail];
+	info->ioport[REG_TR_DATA] = info->xmit.buf[info->xmit.tail];
 	info->xmit.tail = (info->xmit.tail + 1) & (SERIAL_XMIT_SIZE-1);
 	info->icount.tx++;
 	if (info->xmit.head == info->xmit.tail) {
@@ -2848,7 +2848,7 @@ startup(struct e100_serial * info)
 
 	/* dummy read to reset any serial errors */
 
-	(void)info->port[REG_DATA];
+	(void)info->ioport[REG_DATA];
 
 	/* enable the interrupts */
 	if (info->uses_dma_out)
@@ -2897,7 +2897,7 @@ shutdown(struct e100_serial * info)
 	/* shut down the transmitter and receiver */
 	DFLOW(DEBUG_LOG(info->line, "shutdown %i\n", info->line));
 	e100_disable_rx(info);
-	info->port[REG_TR_CTRL] = (info->tx_ctrl &= ~0x40);
+	info->ioport[REG_TR_CTRL] = (info->tx_ctrl &= ~0x40);
 
 	/* disable interrupts, reset dma channels */
 	if (info->uses_dma_in) {
@@ -2968,7 +2968,7 @@ change_speed(struct e100_serial *info)
 
 	if (!info->port.tty || !info->port.tty->termios)
 		return;
-	if (!info->port)
+	if (!info->ioport)
 		return;
 
 	cflag = info->port.tty->termios->c_cflag;
@@ -3037,7 +3037,7 @@ change_speed(struct e100_serial *info)
 
 		info->baud = cflag_to_baud(cflag);
 #ifndef CONFIG_SVINTO_SIM
-		info->port[REG_BAUD] = cflag_to_etrax_baud(cflag);
+		info->ioport[REG_BAUD] = cflag_to_etrax_baud(cflag);
 #endif /* CONFIG_SVINTO_SIM */
 	}
 
@@ -3097,8 +3097,8 @@ change_speed(struct e100_serial *info)
 
 	/* actually write the control regs to the hardware */
 
-	info->port[REG_TR_CTRL] = info->tx_ctrl;
-	info->port[REG_REC_CTRL] = info->rx_ctrl;
+	info->ioport[REG_TR_CTRL] = info->tx_ctrl;
+	info->ioport[REG_REC_CTRL] = info->rx_ctrl;
 	xoff = IO_FIELD(R_SERIAL0_XOFF, xoff_char, STOP_CHAR(info->port.tty));
 	xoff |= IO_STATE(R_SERIAL0_XOFF, tx_stop, enable);
 	if (info->port.tty->termios->c_iflag & IXON ) {
@@ -3107,7 +3107,7 @@ change_speed(struct e100_serial *info)
 		xoff |= IO_STATE(R_SERIAL0_XOFF, auto_xoff, enable);
 	}
 
-	*((unsigned long *)&info->port[REG_XOFF]) = xoff;
+	*((unsigned long *)&info->ioport[REG_XOFF]) = xoff;
 	local_irq_restore(flags);
 #endif /* !CONFIG_SVINTO_SIM */
 
@@ -3156,7 +3156,7 @@ static int rs_raw_write(struct tty_struct *tty,
 #ifdef SERIAL_DEBUG_DATA
 	if (info->line == SERIAL_DEBUG_LINE)
 		printk("rs_raw_write (%d), status %d\n",
-		       count, info->port[REG_STATUS]);
+		       count, info->ioport[REG_STATUS]);
 #endif
 
 #ifdef CONFIG_SVINTO_SIM
@@ -3427,7 +3427,7 @@ get_serial_info(struct e100_serial * info,
 	memset(&tmp, 0, sizeof(tmp));
 	tmp.type = info->type;
 	tmp.line = info->line;
-	tmp.port = (int)info->port;
+	tmp.port = (int)info->ioport;
 	tmp.irq = info->irq;
 	tmp.flags = info->flags;
 	tmp.baud_base = info->baud_base;
@@ -3557,14 +3557,14 @@ char *get_control_state_str(int MLines, char *s)
 }
 #endif
 
-static void
+static int
 rs_break(struct tty_struct *tty, int break_state)
 {
 	struct e100_serial *info = (struct e100_serial *)tty->driver_data;
 	unsigned long flags;
 
-	if (!info->port)
-		return;
+	if (!info->ioport)
+		return -EIO;
 
 	local_irq_save(flags);
 	if (break_state == -1) {
@@ -3575,8 +3575,9 @@ rs_break(struct tty_struct *tty, int break_state)
 		/* Set bit 7 (txd) and 6 (tr_enable) */
 		info->tx_ctrl |= (0x80 | 0x40);
 	}
-	info->port[REG_TR_CTRL] = info->tx_ctrl;
+	info->ioport[REG_TR_CTRL] = info->tx_ctrl;
 	local_irq_restore(flags);
+	return 0;
 }
 
 static int
@@ -4231,9 +4232,9 @@ static int line_info(char *buf, struct e100_serial *info)
 	unsigned long tmp;
 
 	ret = sprintf(buf, "%d: uart:E100 port:%lX irq:%d",
-		      info->line, (unsigned long)info->port, info->irq);
+		      info->line, (unsigned long)info->ioport, info->irq);
 
-	if (!info->port || (info->type == PORT_UNKNOWN)) {
+	if (!info->ioport || (info->type == PORT_UNKNOWN)) {
 		ret += sprintf(buf+ret, "\n");
 		return ret;
 	}
@@ -4281,7 +4282,7 @@ static int line_info(char *buf, struct e100_serial *info)
 	}
 
 	{
-		unsigned char rstat = info->port[REG_STATUS];
+		unsigned char rstat = info->ioport[REG_STATUS];
 		if (rstat & IO_MASK(R_SERIAL0_STATUS, xoff_detect) )
 			ret += sprintf(buf+ret, " xoff_detect:1");
 	}
@@ -4502,7 +4503,7 @@ rs_init(void)
 
 		if (info->enabled) {
 			printk(KERN_INFO "%s%d at 0x%x is a builtin UART with DMA\n",
-			       serial_driver->name, info->line, (unsigned int)info->port);
+			       serial_driver->name, info->line, (unsigned int)info->ioport);
 		}
 	}
 #ifdef CONFIG_ETRAX_FAST_TIMER
diff --git a/drivers/serial/crisv10.h b/drivers/serial/crisv10.h
index ccd0f32b7372..e3c5c8c3c09b 100644
--- a/drivers/serial/crisv10.h
+++ b/drivers/serial/crisv10.h
@@ -36,8 +36,9 @@ struct etrax_recv_buffer {
 };
 
 struct e100_serial {
+	struct tty_port port;
 	int baud;
-	volatile u8	*port;	/* R_SERIALx_CTRL */
+	volatile u8	*ioport;	/* R_SERIALx_CTRL */
 	u32		irq;	/* bitnr in R_IRQ_MASK2 for dmaX_descr */
 
 	/* Output registers */
diff --git a/drivers/serial/imx.c b/drivers/serial/imx.c
index e0da4dc7bbf6..6a29f9330a73 100644
--- a/drivers/serial/imx.c
+++ b/drivers/serial/imx.c
@@ -44,8 +44,8 @@
 
 #include <asm/io.h>
 #include <asm/irq.h>
-#include <asm/hardware.h>
-#include <asm/arch/imx-uart.h>
+#include <mach/hardware.h>
+#include <mach/imx-uart.h>
 
 /* Register definitions */
 #define URXD0 0x0  /* Receiver Register */
diff --git a/drivers/serial/netx-serial.c b/drivers/serial/netx-serial.c
index 9f8ccb735c19..3f489329e8d3 100644
--- a/drivers/serial/netx-serial.c
+++ b/drivers/serial/netx-serial.c
@@ -35,8 +35,8 @@
 
 #include <asm/io.h>
 #include <asm/irq.h>
-#include <asm/hardware.h>
-#include <asm/arch/netx-regs.h>
+#include <mach/hardware.h>
+#include <mach/netx-regs.h>
 
 /* We've been assigned a range on the "Low-density serial ports" major */
 #define SERIAL_NX_MAJOR	204
diff --git a/drivers/serial/pxa.c b/drivers/serial/pxa.c
index b9a93f326fb8..f7a0d37c4221 100644
--- a/drivers/serial/pxa.c
+++ b/drivers/serial/pxa.c
@@ -45,9 +45,9 @@
 #include <linux/clk.h>
 
 #include <asm/io.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/irq.h>
-#include <asm/arch/pxa-regs.h>
+#include <mach/pxa-regs.h>
 
 
 struct uart_pxa_port {
diff --git a/drivers/serial/s3c2400.c b/drivers/serial/s3c2400.c
index a1102053e553..c8b4266ac35f 100644
--- a/drivers/serial/s3c2400.c
+++ b/drivers/serial/s3c2400.c
@@ -17,10 +17,10 @@
 
 #include <asm/irq.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 
 #include <asm/plat-s3c/regs-serial.h>
-#include <asm/arch/regs-gpio.h>
+#include <mach/regs-gpio.h>
 
 #include "samsung.h"
 
diff --git a/drivers/serial/s3c2410.c b/drivers/serial/s3c2410.c
index c5f03f41686f..40a2531b5541 100644
--- a/drivers/serial/s3c2410.c
+++ b/drivers/serial/s3c2410.c
@@ -19,10 +19,10 @@
 #include <linux/serial.h>
 
 #include <asm/irq.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 
 #include <asm/plat-s3c/regs-serial.h>
-#include <asm/arch/regs-gpio.h>
+#include <mach/regs-gpio.h>
 
 #include "samsung.h"
 
diff --git a/drivers/serial/s3c2412.c b/drivers/serial/s3c2412.c
index ce0c220e3e92..d0170319c729 100644
--- a/drivers/serial/s3c2412.c
+++ b/drivers/serial/s3c2412.c
@@ -19,10 +19,10 @@
 #include <linux/serial.h>
 
 #include <asm/irq.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 
 #include <asm/plat-s3c/regs-serial.h>
-#include <asm/arch/regs-gpio.h>
+#include <mach/regs-gpio.h>
 
 #include "samsung.h"
 
diff --git a/drivers/serial/s3c2440.c b/drivers/serial/s3c2440.c
index 38f954bd39c6..d4a2b17b2498 100644
--- a/drivers/serial/s3c2440.c
+++ b/drivers/serial/s3c2440.c
@@ -19,10 +19,10 @@
 #include <linux/serial.h>
 
 #include <asm/irq.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 
 #include <asm/plat-s3c/regs-serial.h>
-#include <asm/arch/regs-gpio.h>
+#include <mach/regs-gpio.h>
 
 #include "samsung.h"
 
diff --git a/drivers/serial/sa1100.c b/drivers/serial/sa1100.c
index a5e76cc18073..b24a25ea6bc5 100644
--- a/drivers/serial/sa1100.c
+++ b/drivers/serial/sa1100.c
@@ -39,7 +39,7 @@
 
 #include <asm/io.h>
 #include <asm/irq.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/mach/serial_sa1100.h>
 
 /* We've been assigned a range on the "Low-density serial ports" major */
diff --git a/drivers/serial/samsung.c b/drivers/serial/samsung.c
index d852f83f8900..5a88b3f9fe9b 100644
--- a/drivers/serial/samsung.c
+++ b/drivers/serial/samsung.c
@@ -45,10 +45,10 @@
 
 #include <asm/irq.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 
 #include <asm/plat-s3c/regs-serial.h>
-#include <asm/arch/regs-gpio.h>
+#include <mach/regs-gpio.h>
 
 #include "samsung.h"
 
diff --git a/drivers/serial/serial_ks8695.c b/drivers/serial/serial_ks8695.c
index 0edbc5dd378b..b9cbfc87f616 100644
--- a/drivers/serial/serial_ks8695.c
+++ b/drivers/serial/serial_ks8695.c
@@ -26,8 +26,8 @@
 #include <asm/irq.h>
 #include <asm/mach/irq.h>
 
-#include <asm/arch/regs-uart.h>
-#include <asm/arch/regs-irq.h>
+#include <mach/regs-uart.h>
+#include <mach/regs-irq.h>
 
 #if defined(CONFIG_SERIAL_KS8695_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
 #define SUPPORT_SYSRQ
diff --git a/drivers/serial/sh-sci.c b/drivers/serial/sh-sci.c
index 208e42ba9455..3df2aaec829f 100644
--- a/drivers/serial/sh-sci.c
+++ b/drivers/serial/sh-sci.c
@@ -410,7 +410,6 @@ static void sci_init_pins_scif(struct uart_port *port, unsigned int cflag)
 #endif
 
 #if defined(CONFIG_CPU_SUBTYPE_SH7760) || \
-    defined(CONFIG_CPU_SUBTYPE_SH7763) || \
     defined(CONFIG_CPU_SUBTYPE_SH7780) || \
     defined(CONFIG_CPU_SUBTYPE_SH7785)
 static inline int scif_txroom(struct uart_port *port)
@@ -422,6 +421,22 @@ static inline int scif_rxroom(struct uart_port *port)
 {
 	return sci_in(port, SCRFDR) & 0xff;
 }
+#elif defined(CONFIG_CPU_SUBTYPE_SH7763)
+static inline int scif_txroom(struct uart_port *port)
+{
+	if((port->mapbase == 0xffe00000) || (port->mapbase == 0xffe08000)) /* SCIF0/1*/
+		return SCIF_TXROOM_MAX - (sci_in(port, SCTFDR) & 0xff);
+	else /* SCIF2 */
+		return SCIF2_TXROOM_MAX - (sci_in(port, SCFDR) >> 8);
+}
+
+static inline int scif_rxroom(struct uart_port *port)
+{
+	if((port->mapbase == 0xffe00000) || (port->mapbase == 0xffe08000)) /* SCIF0/1*/
+		return sci_in(port, SCRFDR) & 0xff;
+	else /* SCIF2 */
+		return sci_in(port, SCFDR) & SCIF2_RFDC_MASK;
+}
 #else
 static inline int scif_txroom(struct uart_port *port)
 {
diff --git a/drivers/serial/sh-sci.h b/drivers/serial/sh-sci.h
index eb84833233fd..8a0749e34ca3 100644
--- a/drivers/serial/sh-sci.h
+++ b/drivers/serial/sh-sci.h
@@ -123,8 +123,9 @@
 #elif defined(CONFIG_CPU_SUBTYPE_SH7763)
 # define SCSPTR0 0xffe00024 /* 16 bit SCIF */
 # define SCSPTR1 0xffe08024 /* 16 bit SCIF */
+# define SCSPTR2 0xffe10020 /* 16 bit SCIF/IRDA */
 # define SCIF_ORER 0x0001  /* overrun error bit */
-# define SCSCR_INIT(port)	0x3a	/* TIE=0,RIE=0,TE=1,RE=1,REIE=1 */
+# define SCSCR_INIT(port)	0x38	/* TIE=0,RIE=0,TE=1,RE=1,REIE=1 */
 # define SCIF_ONLY
 #elif defined(CONFIG_CPU_SUBTYPE_SH7770)
 # define SCSPTR0 0xff923020 /* 16 bit SCIF */
@@ -188,6 +189,7 @@
     defined(CONFIG_CPU_SUBTYPE_SH7750S) || \
     defined(CONFIG_CPU_SUBTYPE_SH7751)  || \
     defined(CONFIG_CPU_SUBTYPE_SH7751R) || \
+    defined(CONFIG_CPU_SUBTYPE_SH7763)  || \
     defined(CONFIG_CPU_SUBTYPE_SH7780)  || \
     defined(CONFIG_CPU_SUBTYPE_SH7785)  || \
     defined(CONFIG_CPU_SUBTYPE_SHX3)
@@ -225,14 +227,21 @@
 #if defined(CONFIG_CPU_SUBTYPE_SH7705) || \
     defined(CONFIG_CPU_SUBTYPE_SH7720) || \
     defined(CONFIG_CPU_SUBTYPE_SH7721)
-#define SCIF_ORER    0x0200
-#define SCIF_ERRORS ( SCIF_PER | SCIF_FER | SCIF_ER | SCIF_BRK | SCIF_ORER)
-#define SCIF_RFDC_MASK 0x007f
-#define SCIF_TXROOM_MAX 64
+# define SCIF_ORER    0x0200
+# define SCIF_ERRORS ( SCIF_PER | SCIF_FER | SCIF_ER | SCIF_BRK | SCIF_ORER)
+# define SCIF_RFDC_MASK 0x007f
+# define SCIF_TXROOM_MAX 64
+#elif defined(CONFIG_CPU_SUBTYPE_SH7763)
+# define SCIF_ERRORS ( SCIF_PER | SCIF_FER | SCIF_ER | SCIF_BRK )
+# define SCIF_RFDC_MASK 0x007f
+# define SCIF_TXROOM_MAX 64
+/* SH7763 SCIF2 support */
+# define SCIF2_RFDC_MASK 0x001f
+# define SCIF2_TXROOM_MAX 16
 #else
-#define SCIF_ERRORS ( SCIF_PER | SCIF_FER | SCIF_ER | SCIF_BRK)
-#define SCIF_RFDC_MASK 0x001f
-#define SCIF_TXROOM_MAX 16
+# define SCIF_ERRORS ( SCIF_PER | SCIF_FER | SCIF_ER | SCIF_BRK)
+# define SCIF_RFDC_MASK 0x001f
+# define SCIF_TXROOM_MAX 16
 #endif
 
 #if defined(SCI_ONLY)
@@ -442,7 +451,6 @@ SCIx_FNS(SCxSR,  0x08,  8, 0x10,  8, 0x08, 16, 0x10, 16, 0x04,  8)
 SCIx_FNS(SCxRDR, 0x0a,  8, 0x14,  8, 0x0A,  8, 0x14,  8, 0x05,  8)
 SCIF_FNS(SCFCR,                      0x0c,  8, 0x18, 16)
 #if defined(CONFIG_CPU_SUBTYPE_SH7760) || \
-    defined(CONFIG_CPU_SUBTYPE_SH7763) || \
     defined(CONFIG_CPU_SUBTYPE_SH7780) || \
     defined(CONFIG_CPU_SUBTYPE_SH7785)
 SCIF_FNS(SCFDR,			     0x0e, 16, 0x1C, 16)
@@ -450,6 +458,14 @@ SCIF_FNS(SCTFDR,		     0x0e, 16, 0x1C, 16)
 SCIF_FNS(SCRFDR,		     0x0e, 16, 0x20, 16)
 SCIF_FNS(SCSPTR,			0,  0, 0x24, 16)
 SCIF_FNS(SCLSR,				0,  0, 0x28, 16)
+#elif defined(CONFIG_CPU_SUBTYPE_SH7763)
+SCIF_FNS(SCFDR,				0,  0, 0x1C, 16)
+SCIF_FNS(SCSPTR2,			0,  0, 0x20, 16)
+SCIF_FNS(SCLSR2,			0,  0, 0x24, 16)
+SCIF_FNS(SCTFDR,		     0x0e, 16, 0x1C, 16)
+SCIF_FNS(SCRFDR,		     0x0e, 16, 0x20, 16)
+SCIF_FNS(SCSPTR,			0,  0, 0x24, 16)
+SCIF_FNS(SCLSR,				0,  0, 0x28, 16)
 #else
 SCIF_FNS(SCFDR,                      0x0e, 16, 0x1C, 16)
 #if defined(CONFIG_CPU_SUBTYPE_SH7722)
@@ -652,6 +668,9 @@ static inline int sci_rxd_in(struct uart_port *port)
 		return ctrl_inw(SCSPTR0) & 0x0001 ? 1 : 0; /* SCIF */
 	if (port->mapbase == 0xffe08000)
 		return ctrl_inw(SCSPTR1) & 0x0001 ? 1 : 0; /* SCIF */
+	if (port->mapbase == 0xffe10000)
+		return ctrl_inw(SCSPTR2) & 0x0001 ? 1 : 0; /* SCIF/IRDA */
+
 	return 1;
 }
 #elif defined(CONFIG_CPU_SUBTYPE_SH7770)
@@ -764,8 +783,7 @@ static inline int sci_rxd_in(struct uart_port *port)
  * -- Mitch Davis - 15 Jul 2000
  */
 
-#if defined(CONFIG_CPU_SUBTYPE_SH7763) || \
-    defined(CONFIG_CPU_SUBTYPE_SH7780) || \
+#if defined(CONFIG_CPU_SUBTYPE_SH7780) || \
     defined(CONFIG_CPU_SUBTYPE_SH7785)
 #define SCBRR_VALUE(bps, clk) ((clk+16*bps)/(16*bps)-1)
 #elif defined(CONFIG_CPU_SUBTYPE_SH7705) || \
diff --git a/drivers/serial/sunhv.c b/drivers/serial/sunhv.c
index aeeec5588afd..e41766d08035 100644
--- a/drivers/serial/sunhv.c
+++ b/drivers/serial/sunhv.c
@@ -17,11 +17,11 @@
 #include <linux/slab.h>
 #include <linux/delay.h>
 #include <linux/init.h>
+#include <linux/of_device.h>
 
 #include <asm/hypervisor.h>
 #include <asm/spitfire.h>
 #include <asm/prom.h>
-#include <asm/of_device.h>
 #include <asm/irq.h>
 
 #if defined(CONFIG_MAGIC_SYSRQ)
diff --git a/drivers/serial/sunsab.c b/drivers/serial/sunsab.c
index 15ee497e1c78..29b4458abf74 100644
--- a/drivers/serial/sunsab.c
+++ b/drivers/serial/sunsab.c
@@ -32,11 +32,11 @@
 #include <linux/slab.h>
 #include <linux/delay.h>
 #include <linux/init.h>
+#include <linux/of_device.h>
 
 #include <asm/io.h>
 #include <asm/irq.h>
 #include <asm/prom.h>
-#include <asm/of_device.h>
 
 #if defined(CONFIG_SERIAL_SUNSAB_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
 #define SUPPORT_SYSRQ
diff --git a/drivers/serial/sunsu.c b/drivers/serial/sunsu.c
index e24e68235088..a378464f9292 100644
--- a/drivers/serial/sunsu.c
+++ b/drivers/serial/sunsu.c
@@ -35,11 +35,11 @@
 #include <linux/serial_reg.h>
 #include <linux/init.h>
 #include <linux/delay.h>
+#include <linux/of_device.h>
 
 #include <asm/io.h>
 #include <asm/irq.h>
 #include <asm/prom.h>
-#include <asm/of_device.h>
 
 #if defined(CONFIG_SERIAL_SUNSU_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
 #define SUPPORT_SYSRQ
diff --git a/drivers/serial/sunzilog.c b/drivers/serial/sunzilog.c
index 0f3d69b86d67..3cb4c8aee13f 100644
--- a/drivers/serial/sunzilog.c
+++ b/drivers/serial/sunzilog.c
@@ -32,11 +32,11 @@
 #include <linux/serio.h>
 #endif
 #include <linux/init.h>
+#include <linux/of_device.h>
 
 #include <asm/io.h>
 #include <asm/irq.h>
 #include <asm/prom.h>
-#include <asm/of_device.h>
 
 #if defined(CONFIG_SERIAL_SUNZILOG_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
 #define SUPPORT_SYSRQ
diff --git a/drivers/serial/v850e_uart.c b/drivers/serial/v850e_uart.c
deleted file mode 100644
index 5acf061b6cd2..000000000000
--- a/drivers/serial/v850e_uart.c
+++ /dev/null
@@ -1,548 +0,0 @@
-/*
- * drivers/serial/v850e_uart.c -- Serial I/O using V850E on-chip UART or UARTB
- *
- *  Copyright (C) 2001,02,03  NEC Electronics Corporation
- *  Copyright (C) 2001,02,03  Miles Bader <miles@gnu.org>
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License.  See the file COPYING in the main directory of this
- * archive for more details.
- *
- * Written by Miles Bader <miles@gnu.org>
- */
-
-/* This driver supports both the original V850E UART interface (called
-   merely `UART' in the docs) and the newer `UARTB' interface, which is
-   roughly a superset of the first one.  The selection is made at
-   configure time -- if CONFIG_V850E_UARTB is defined, then UARTB is
-   presumed, otherwise the old UART -- as these are on-CPU UARTS, a system
-   can never have both.
-
-   The UARTB interface also has a 16-entry FIFO mode, which is not
-   yet supported by this driver.  */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/console.h>
-#include <linux/tty.h>
-#include <linux/tty_flip.h>
-#include <linux/serial.h>
-#include <linux/serial_core.h>
-
-#include <asm/v850e_uart.h>
-
-/* Initial UART state.  This may be overridden by machine-dependent headers. */
-#ifndef V850E_UART_INIT_BAUD
-#define V850E_UART_INIT_BAUD	115200
-#endif
-#ifndef V850E_UART_INIT_CFLAGS
-#define V850E_UART_INIT_CFLAGS	(B115200 | CS8 | CREAD)
-#endif
-
-/* A string used for prefixing printed descriptions; since the same UART
-   macro is actually used on other chips than the V850E.  This must be a
-   constant string.  */
-#ifndef V850E_UART_CHIP_NAME
-#define V850E_UART_CHIP_NAME	"V850E"
-#endif
-
-#define V850E_UART_MINOR_BASE	64	   /* First tty minor number */
-
-
-/* Low-level UART functions.  */
-
-/* Configure and turn on uart channel CHAN, using the termios `control
-   modes' bits in CFLAGS, and a baud-rate of BAUD.  */
-void v850e_uart_configure (unsigned chan, unsigned cflags, unsigned baud)
-{
-	int flags;
-	v850e_uart_speed_t old_speed;
-	v850e_uart_config_t old_config;
-	v850e_uart_speed_t new_speed = v850e_uart_calc_speed (baud);
-	v850e_uart_config_t new_config = v850e_uart_calc_config (cflags);
-
-	/* Disable interrupts while we're twiddling the hardware.  */
-	local_irq_save (flags);
-
-#ifdef V850E_UART_PRE_CONFIGURE
-	V850E_UART_PRE_CONFIGURE (chan, cflags, baud);
-#endif
-
-	old_config = V850E_UART_CONFIG (chan);
-	old_speed = v850e_uart_speed (chan);
-
-	if (! v850e_uart_speed_eq (old_speed, new_speed)) {
-		/* The baud rate has changed.  First, disable the UART.  */
-		V850E_UART_CONFIG (chan) = V850E_UART_CONFIG_FINI;
-		old_config = 0;	/* Force the uart to be re-initialized. */
-
-		/* Reprogram the baud-rate generator.  */
-		v850e_uart_set_speed (chan, new_speed);
-	}
-
-	if (! (old_config & V850E_UART_CONFIG_ENABLED)) {
-		/* If we are using the uart for the first time, start by
-		   enabling it, which must be done before turning on any
-		   other bits.  */
-		V850E_UART_CONFIG (chan) = V850E_UART_CONFIG_INIT;
-		/* See the initial state.  */
-		old_config = V850E_UART_CONFIG (chan);
-	}
-
-	if (new_config != old_config) {
-		/* Which of the TXE/RXE bits we'll temporarily turn off
-		   before changing other control bits.  */
-		unsigned temp_disable = 0;
-		/* Which of the TXE/RXE bits will be enabled.  */
-		unsigned enable = 0;
-		unsigned changed_bits = new_config ^ old_config;
-
-		/* Which of RX/TX will be enabled in the new configuration.  */
-		if (new_config & V850E_UART_CONFIG_RX_BITS)
-			enable |= (new_config & V850E_UART_CONFIG_RX_ENABLE);
-		if (new_config & V850E_UART_CONFIG_TX_BITS)
-			enable |= (new_config & V850E_UART_CONFIG_TX_ENABLE);
-
-		/* Figure out which of RX/TX needs to be disabled; note
-		   that this will only happen if they're not already
-		   disabled.  */
-		if (changed_bits & V850E_UART_CONFIG_RX_BITS)
-			temp_disable
-				|= (old_config & V850E_UART_CONFIG_RX_ENABLE);
-		if (changed_bits & V850E_UART_CONFIG_TX_BITS)
-			temp_disable
-				|= (old_config & V850E_UART_CONFIG_TX_ENABLE);
-
-		/* We have to turn off RX and/or TX mode before changing
-		   any associated control bits.  */
-		if (temp_disable)
-			V850E_UART_CONFIG (chan) = old_config & ~temp_disable;
-
-		/* Write the new control bits, while RX/TX are disabled. */ 
-		if (changed_bits & ~enable)
-			V850E_UART_CONFIG (chan) = new_config & ~enable;
-
-		v850e_uart_config_delay (new_config, new_speed);
-
-		/* Write the final version, with enable bits turned on.  */
-		V850E_UART_CONFIG (chan) = new_config;
-	}
-
-	local_irq_restore (flags);
-}
-
-
-/*  Low-level console. */
-
-#ifdef CONFIG_V850E_UART_CONSOLE
-
-static void v850e_uart_cons_write (struct console *co,
-				   const char *s, unsigned count)
-{
-	if (count > 0) {
-		unsigned chan = co->index;
-		unsigned irq = V850E_UART_TX_IRQ (chan);
-		int irq_was_enabled, irq_was_pending, flags;
-
-		/* We don't want to get `transmission completed'
-		   interrupts, since we're busy-waiting, so we disable them
-		   while sending (we don't disable interrupts entirely
-		   because sending over a serial line is really slow).  We
-		   save the status of the tx interrupt and restore it when
-		   we're done so that using printk doesn't interfere with
-		   normal serial transmission (other than interleaving the
-		   output, of course!).  This should work correctly even if
-		   this function is interrupted and the interrupt printks
-		   something.  */
-
-		/* Disable interrupts while fiddling with tx interrupt.  */
-		local_irq_save (flags);
-		/* Get current tx interrupt status.  */
-		irq_was_enabled = v850e_intc_irq_enabled (irq);
-		irq_was_pending = v850e_intc_irq_pending (irq);
-		/* Disable tx interrupt if necessary.  */
-		if (irq_was_enabled)
-			v850e_intc_disable_irq (irq);
-		/* Turn interrupts back on.  */
-		local_irq_restore (flags);
-
-		/* Send characters.  */
-		while (count > 0) {
-			int ch = *s++;
-
-			if (ch == '\n') {
-				/* We don't have the benefit of a tty
-				   driver, so translate NL into CR LF.  */
-				v850e_uart_wait_for_xmit_ok (chan);
-				v850e_uart_putc (chan, '\r');
-			}
-
-			v850e_uart_wait_for_xmit_ok (chan);
-			v850e_uart_putc (chan, ch);
-
-			count--;
-		}
-
-		/* Restore saved tx interrupt status.  */
-		if (irq_was_enabled) {
-			/* Wait for the last character we sent to be
-			   completely transmitted (as we'll get an
-			   interrupt interrupt at that point).  */
-			v850e_uart_wait_for_xmit_done (chan);
-			/* Clear pending interrupts received due
-			   to our transmission, unless there was already
-			   one pending, in which case we want the
-			   handler to be called.  */
-			if (! irq_was_pending)
-				v850e_intc_clear_pending_irq (irq);
-			/* ... and then turn back on handling.  */
-			v850e_intc_enable_irq (irq);
-		}
-	}
-}
-
-extern struct uart_driver v850e_uart_driver;
-static struct console v850e_uart_cons =
-{
-    .name	= "ttyS",
-    .write	= v850e_uart_cons_write,
-    .device	= uart_console_device,
-    .flags	= CON_PRINTBUFFER,
-    .cflag	= V850E_UART_INIT_CFLAGS,
-    .index	= -1,
-    .data	= &v850e_uart_driver,
-};
-
-void v850e_uart_cons_init (unsigned chan)
-{
-	v850e_uart_configure (chan, V850E_UART_INIT_CFLAGS,
-			      V850E_UART_INIT_BAUD);
-	v850e_uart_cons.index = chan;
-	register_console (&v850e_uart_cons);
-	printk ("Console: %s on-chip UART channel %d\n",
-		V850E_UART_CHIP_NAME, chan);
-}
-
-/* This is what the init code actually calls.  */
-static int v850e_uart_console_init (void)
-{
-	v850e_uart_cons_init (V850E_UART_CONSOLE_CHANNEL);
-	return 0;
-}
-console_initcall(v850e_uart_console_init);
-
-#define V850E_UART_CONSOLE &v850e_uart_cons
-
-#else /* !CONFIG_V850E_UART_CONSOLE */
-#define V850E_UART_CONSOLE 0
-#endif /* CONFIG_V850E_UART_CONSOLE */
-
-/* TX/RX interrupt handlers.  */
-
-static void v850e_uart_stop_tx (struct uart_port *port);
-
-void v850e_uart_tx (struct uart_port *port)
-{
-	struct circ_buf *xmit = &port->info->xmit;
-	int stopped = uart_tx_stopped (port);
-
-	if (v850e_uart_xmit_ok (port->line)) {
-		int tx_ch;
-
-		if (port->x_char) {
-			tx_ch = port->x_char;
-			port->x_char = 0;
-		} else if (!uart_circ_empty (xmit) && !stopped) {
-			tx_ch = xmit->buf[xmit->tail];
-			xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
-		} else
-			goto no_xmit;
-
-		v850e_uart_putc (port->line, tx_ch);
-		port->icount.tx++;
-
-		if (uart_circ_chars_pending (xmit) < WAKEUP_CHARS)
-			uart_write_wakeup (port);
-	}
-
- no_xmit:
-	if (uart_circ_empty (xmit) || stopped)
-		v850e_uart_stop_tx (port, stopped);
-}
-
-static irqreturn_t v850e_uart_tx_irq(int irq, void *data)
-{
-	struct uart_port *port = data;
-	v850e_uart_tx (port);
-	return IRQ_HANDLED;
-}
-
-static irqreturn_t v850e_uart_rx_irq(int irq, void *data)
-{
-	struct uart_port *port = data;
-	unsigned ch_stat = TTY_NORMAL;
-	unsigned ch = v850e_uart_getc (port->line);
-	unsigned err = v850e_uart_err (port->line);
-
-	if (err) {
-		if (err & V850E_UART_ERR_OVERRUN) {
-			ch_stat = TTY_OVERRUN;
-			port->icount.overrun++;
-		} else if (err & V850E_UART_ERR_FRAME) {
-			ch_stat = TTY_FRAME;
-			port->icount.frame++;
-		} else if (err & V850E_UART_ERR_PARITY) {
-			ch_stat = TTY_PARITY;
-			port->icount.parity++;
-		}
-	}
-
-	port->icount.rx++;
-
-	tty_insert_flip_char (port->info->port.tty, ch, ch_stat);
-	tty_schedule_flip (port->info->port.tty);
-
-	return IRQ_HANDLED;
-}
-
-
-/* Control functions for the serial framework.  */
-
-static void v850e_uart_nop (struct uart_port *port) { }
-static int v850e_uart_success (struct uart_port *port) { return 0; }
-
-static unsigned v850e_uart_tx_empty (struct uart_port *port)
-{
-	return TIOCSER_TEMT;	/* Can't detect.  */
-}
-
-static void v850e_uart_set_mctrl (struct uart_port *port, unsigned mctrl)
-{
-#ifdef V850E_UART_SET_RTS
-	V850E_UART_SET_RTS (port->line, (mctrl & TIOCM_RTS));
-#endif
-}
-
-static unsigned v850e_uart_get_mctrl (struct uart_port *port)
-{
-	/* We don't support DCD or DSR, so consider them permanently active. */
-	int mctrl = TIOCM_CAR | TIOCM_DSR;
-
-	/* We may support CTS.  */
-#ifdef V850E_UART_CTS
-	mctrl |= V850E_UART_CTS(port->line) ? TIOCM_CTS : 0;
-#else
-	mctrl |= TIOCM_CTS;
-#endif
-
-	return mctrl;
-}
-
-static void v850e_uart_start_tx (struct uart_port *port)
-{
-	v850e_intc_disable_irq (V850E_UART_TX_IRQ (port->line));
-	v850e_uart_tx (port);
-	v850e_intc_enable_irq (V850E_UART_TX_IRQ (port->line));
-}
-
-static void v850e_uart_stop_tx (struct uart_port *port)
-{
-	v850e_intc_disable_irq (V850E_UART_TX_IRQ (port->line));
-}
-
-static void v850e_uart_start_rx (struct uart_port *port)
-{
-	v850e_intc_enable_irq (V850E_UART_RX_IRQ (port->line));
-}
-
-static void v850e_uart_stop_rx (struct uart_port *port)
-{
-	v850e_intc_disable_irq (V850E_UART_RX_IRQ (port->line));
-}
-
-static void v850e_uart_break_ctl (struct uart_port *port, int break_ctl)
-{
-	/* Umm, do this later.  */
-}
-
-static int v850e_uart_startup (struct uart_port *port)
-{
-	int err;
-
-	/* Alloc RX irq.  */
-	err = request_irq (V850E_UART_RX_IRQ (port->line), v850e_uart_rx_irq,
-			   IRQF_DISABLED, "v850e_uart", port);
-	if (err)
-		return err;
-
-	/* Alloc TX irq.  */
-	err = request_irq (V850E_UART_TX_IRQ (port->line), v850e_uart_tx_irq,
-			   IRQF_DISABLED, "v850e_uart", port);
-	if (err) {
-		free_irq (V850E_UART_RX_IRQ (port->line), port);
-		return err;
-	}
-
-	v850e_uart_start_rx (port);
-
-	return 0;
-}
-
-static void v850e_uart_shutdown (struct uart_port *port)
-{
-	/* Disable port interrupts.  */
-	free_irq (V850E_UART_TX_IRQ (port->line), port);
-	free_irq (V850E_UART_RX_IRQ (port->line), port);
-
-	/* Turn off xmit/recv enable bits.  */
-	V850E_UART_CONFIG (port->line)
-		&= ~(V850E_UART_CONFIG_TX_ENABLE
-		     | V850E_UART_CONFIG_RX_ENABLE);
-	/* Then reset the channel.  */
-	V850E_UART_CONFIG (port->line) = 0;
-}
-
-static void
-v850e_uart_set_termios (struct uart_port *port, struct ktermios *termios,
-		        struct ktermios *old)
-{
-	unsigned cflags = termios->c_cflag;
-
-	/* Restrict flags to legal values.  */
-	if ((cflags & CSIZE) != CS7 && (cflags & CSIZE) != CS8)
-		/* The new value of CSIZE is invalid, use the old value.  */
-		cflags = (cflags & ~CSIZE)
-			| (old ? (old->c_cflag & CSIZE) : CS8);
-
-	termios->c_cflag = cflags;
-
-	v850e_uart_configure (port->line, cflags,
-			      uart_get_baud_rate (port, termios, old,
-						  v850e_uart_min_baud(),
-						  v850e_uart_max_baud()));
-}
-
-static const char *v850e_uart_type (struct uart_port *port)
-{
-	return port->type == PORT_V850E_UART ? "v850e_uart" : 0;
-}
-
-static void v850e_uart_config_port (struct uart_port *port, int flags)
-{
-	if (flags & UART_CONFIG_TYPE)
-		port->type = PORT_V850E_UART;
-}
-
-static int
-v850e_uart_verify_port (struct uart_port *port, struct serial_struct *ser)
-{
-	if (ser->type != PORT_UNKNOWN && ser->type != PORT_V850E_UART)
-		return -EINVAL;
-	if (ser->irq != V850E_UART_TX_IRQ (port->line))
-		return -EINVAL;
-	return 0;
-}
-
-static struct uart_ops v850e_uart_ops = {
-	.tx_empty	= v850e_uart_tx_empty,
-	.get_mctrl	= v850e_uart_get_mctrl,
-	.set_mctrl	= v850e_uart_set_mctrl,
-	.start_tx	= v850e_uart_start_tx,
-	.stop_tx	= v850e_uart_stop_tx,
-	.stop_rx	= v850e_uart_stop_rx,
-	.enable_ms	= v850e_uart_nop,
-	.break_ctl	= v850e_uart_break_ctl,
-	.startup	= v850e_uart_startup,
-	.shutdown	= v850e_uart_shutdown,
-	.set_termios	= v850e_uart_set_termios,
-	.type		= v850e_uart_type,
-	.release_port	= v850e_uart_nop,
-	.request_port	= v850e_uart_success,
-	.config_port	= v850e_uart_config_port,
-	.verify_port	= v850e_uart_verify_port,
-};
-
-/* Initialization and cleanup.  */
-
-static struct uart_driver v850e_uart_driver = {
-	.owner			= THIS_MODULE,
-	.driver_name		= "v850e_uart",
-	.dev_name		= "ttyS",
-	.major			= TTY_MAJOR,
-	.minor			= V850E_UART_MINOR_BASE,
-	.nr			= V850E_UART_NUM_CHANNELS,
-	.cons			= V850E_UART_CONSOLE,
-};
-
-
-static struct uart_port v850e_uart_ports[V850E_UART_NUM_CHANNELS];
-
-static int __init v850e_uart_init (void)
-{
-	int rval;
-
-	printk (KERN_INFO "%s on-chip UART\n", V850E_UART_CHIP_NAME);
-
-	rval = uart_register_driver (&v850e_uart_driver);
-	if (rval == 0) {
-		unsigned chan;
-
-		for (chan = 0; chan < V850E_UART_NUM_CHANNELS; chan++) {
-			struct uart_port *port = &v850e_uart_ports[chan];
-			
-			memset (port, 0, sizeof *port);
-
-			port->ops = &v850e_uart_ops;
-			port->line = chan;
-			port->iotype = UPIO_MEM;
-			port->flags = UPF_BOOT_AUTOCONF;
-
-			/* We actually use multiple IRQs, but the serial
-			   framework seems to mainly use this for
-			   informational purposes anyway.  Here we use the TX
-			   irq.  */
-			port->irq = V850E_UART_TX_IRQ (chan);
-
-			/* The serial framework doesn't really use these
-			   membase/mapbase fields for anything useful, but
-			   it requires that they be something non-zero to
-			   consider the port `valid', and also uses them
-			   for informational purposes.  */
-			port->membase = (void *)V850E_UART_BASE_ADDR (chan);
-			port->mapbase = V850E_UART_BASE_ADDR (chan);
-
-			/* The framework insists on knowing the uart's master
-			   clock freq, though it doesn't seem to do anything
-			   useful for us with it.  We must make it at least
-			   higher than (the maximum baud rate * 16), otherwise
-			   the framework will puke during its internal
-			   calculations, and force the baud rate to be 9600.
-			   To be accurate though, just repeat the calculation
-			   we use when actually setting the speed.  */
-			port->uartclk = v850e_uart_max_clock() * 16;
-
-			uart_add_one_port (&v850e_uart_driver, port);
-		}
-	}
-
-	return rval;
-}
-
-static void __exit v850e_uart_exit (void)
-{
-	unsigned chan;
-
-	for (chan = 0; chan < V850E_UART_NUM_CHANNELS; chan++)
-		uart_remove_one_port (&v850e_uart_driver,
-				      &v850e_uart_ports[chan]);
-
-	uart_unregister_driver (&v850e_uart_driver);
-}
-
-module_init (v850e_uart_init);
-module_exit (v850e_uart_exit);
-
-MODULE_AUTHOR ("Miles Bader");
-MODULE_DESCRIPTION ("NEC " V850E_UART_CHIP_NAME " on-chip UART");
-MODULE_LICENSE ("GPL");
diff --git a/drivers/sh/maple/maple.c b/drivers/sh/maple/maple.c
index 617efb1640b1..d1812d32f47d 100644
--- a/drivers/sh/maple/maple.c
+++ b/drivers/sh/maple/maple.c
@@ -2,6 +2,7 @@
  * Core maple bus functionality
  *
  *  Copyright (C) 2007, 2008 Adrian McMenamin
+ *  Copyright (C) 2001 - 2008 Paul Mundt
  *
  * Based on 2.4 code by:
  *
@@ -24,15 +25,14 @@
 #include <linux/slab.h>
 #include <linux/maple.h>
 #include <linux/dma-mapping.h>
+#include <linux/delay.h>
 #include <asm/cacheflush.h>
 #include <asm/dma.h>
 #include <asm/io.h>
-#include <asm/mach/dma.h>
-#include <asm/mach/sysasic.h>
-#include <asm/mach/maple.h>
-#include <linux/delay.h>
+#include <mach/dma.h>
+#include <mach/sysasic.h>
 
-MODULE_AUTHOR("Yaegshi Takeshi, Paul Mundt, M.R. Brown, Adrian McMenamin");
+MODULE_AUTHOR("Yaegashi Takeshi, Paul Mundt, M. R. Brown, Adrian McMenamin");
 MODULE_DESCRIPTION("Maple bus driver for Dreamcast");
 MODULE_LICENSE("GPL v2");
 MODULE_SUPPORTED_DEVICE("{{SEGA, Dreamcast/Maple}}");
@@ -46,14 +46,15 @@ static DECLARE_WORK(maple_vblank_process, maple_vblank_handler);
 static LIST_HEAD(maple_waitq);
 static LIST_HEAD(maple_sentq);
 
-static DEFINE_MUTEX(maple_list_lock);
+/* mutex to protect queue of waiting packets */
+static DEFINE_MUTEX(maple_wlist_lock);
 
 static struct maple_driver maple_dummy_driver;
 static struct device maple_bus;
 static int subdevice_map[MAPLE_PORTS];
 static unsigned long *maple_sendbuf, *maple_sendptr, *maple_lastptr;
 static unsigned long maple_pnp_time;
-static int started, scanning, liststatus, fullscan;
+static int started, scanning, fullscan;
 static struct kmem_cache *maple_queue_cache;
 
 struct maple_device_specify {
@@ -65,19 +66,36 @@ static bool checked[4];
 static struct maple_device *baseunits[4];
 
 /**
- *  maple_driver_register - register a device driver
- *  automatically makes the driver bus a maple bus
- *  @drv: the driver to be registered
+ * maple_driver_register - register a maple driver
+ * @drv: maple driver to be registered.
+ *
+ * Registers the passed in @drv, while updating the bus type.
+ * Devices with matching function IDs will be automatically probed.
  */
-int maple_driver_register(struct device_driver *drv)
+int maple_driver_register(struct maple_driver *drv)
 {
 	if (!drv)
 		return -EINVAL;
-	drv->bus = &maple_bus_type;
-	return driver_register(drv);
+
+	drv->drv.bus = &maple_bus_type;
+
+	return driver_register(&drv->drv);
 }
 EXPORT_SYMBOL_GPL(maple_driver_register);
 
+/**
+ * maple_driver_unregister - unregister a maple driver.
+ * @drv: maple driver to unregister.
+ *
+ * Cleans up after maple_driver_register(). To be invoked in the exit
+ * path of any module drivers.
+ */
+void maple_driver_unregister(struct maple_driver *drv)
+{
+	driver_unregister(&drv->drv);
+}
+EXPORT_SYMBOL_GPL(maple_driver_unregister);
+
 /* set hardware registers to enable next round of dma */
 static void maplebus_dma_reset(void)
 {
@@ -131,33 +149,123 @@ static void maple_release_device(struct device *dev)
 
 /**
  * maple_add_packet - add a single instruction to the queue
- * @mq: instruction to add to waiting queue
+ * @mdev: maple device
+ * @function: function on device being queried
+ * @command: maple command to add
+ * @length: length of command string (in 32 bit words)
+ * @data: remainder of command string
  */
-void maple_add_packet(struct mapleq *mq)
+int maple_add_packet(struct maple_device *mdev, u32 function, u32 command,
+	size_t length, void *data)
 {
-	mutex_lock(&maple_list_lock);
-	list_add(&mq->list, &maple_waitq);
-	mutex_unlock(&maple_list_lock);
+	int locking, ret = 0;
+	void *sendbuf = NULL;
+
+	mutex_lock(&maple_wlist_lock);
+	/* bounce if device already locked */
+	locking = mutex_is_locked(&mdev->mq->mutex);
+	if (locking) {
+		ret = -EBUSY;
+		goto out;
+	}
+
+	mutex_lock(&mdev->mq->mutex);
+
+	if (length) {
+		sendbuf = kmalloc(length * 4, GFP_KERNEL);
+		if (!sendbuf) {
+			mutex_unlock(&mdev->mq->mutex);
+			ret = -ENOMEM;
+			goto out;
+		}
+		((__be32 *)sendbuf)[0] = cpu_to_be32(function);
+	}
+
+	mdev->mq->command = command;
+	mdev->mq->length = length;
+	if (length > 1)
+		memcpy(sendbuf + 4, data, (length - 1) * 4);
+	mdev->mq->sendbuf = sendbuf;
+
+	list_add(&mdev->mq->list, &maple_waitq);
+out:
+	mutex_unlock(&maple_wlist_lock);
+	return ret;
 }
 EXPORT_SYMBOL_GPL(maple_add_packet);
 
+/**
+ * maple_add_packet_sleeps - add a single instruction to the queue
+ * @mdev: maple device
+ * @function: function on device being queried
+ * @command: maple command to add
+ * @length: length of command string (in 32 bit words)
+ * @data: remainder of command string
+ *
+ * Same as maple_add_packet(), but waits for the lock to become free.
+ */
+int maple_add_packet_sleeps(struct maple_device *mdev, u32 function,
+	u32 command, size_t length, void *data)
+{
+	int locking, ret = 0;
+	void *sendbuf = NULL;
+
+	locking = mutex_lock_interruptible(&mdev->mq->mutex);
+	if (locking) {
+		ret = -EIO;
+		goto out;
+	}
+
+	if (length) {
+		sendbuf = kmalloc(length * 4, GFP_KERNEL);
+		if (!sendbuf) {
+			mutex_unlock(&mdev->mq->mutex);
+			ret = -ENOMEM;
+			goto out;
+		}
+		((__be32 *)sendbuf)[0] = cpu_to_be32(function);
+	}
+
+	mdev->mq->command = command;
+	mdev->mq->length = length;
+	if (length > 1)
+		memcpy(sendbuf + 4, data, (length - 1) * 4);
+	mdev->mq->sendbuf = sendbuf;
+
+	mutex_lock(&maple_wlist_lock);
+	list_add(&mdev->mq->list, &maple_waitq);
+	mutex_unlock(&maple_wlist_lock);
+out:
+	return ret;
+}
+EXPORT_SYMBOL_GPL(maple_add_packet_sleeps);
+
 static struct mapleq *maple_allocq(struct maple_device *mdev)
 {
 	struct mapleq *mq;
 
 	mq = kmalloc(sizeof(*mq), GFP_KERNEL);
 	if (!mq)
-		return NULL;
+		goto failed_nomem;
 
 	mq->dev = mdev;
 	mq->recvbufdcsp = kmem_cache_zalloc(maple_queue_cache, GFP_KERNEL);
 	mq->recvbuf = (void *) P2SEGADDR(mq->recvbufdcsp);
-	if (!mq->recvbuf) {
-		kfree(mq);
-		return NULL;
-	}
+	if (!mq->recvbuf)
+		goto failed_p2;
+	/*
+	 * most devices do not need the mutex - but
+	 * anything that injects block reads or writes
+	 * will rely on it
+	 */
+	mutex_init(&mq->mutex);
 
 	return mq;
+
+failed_p2:
+	kfree(mq);
+failed_nomem:
+	return NULL;
 }
 
 static struct maple_device *maple_alloc_dev(int port, int unit)
@@ -178,7 +286,6 @@ static struct maple_device *maple_alloc_dev(int port, int unit)
 	}
 	mdev->dev.bus = &maple_bus_type;
 	mdev->dev.parent = &maple_bus;
-	mdev->function = 0;
 	return mdev;
 }
 
@@ -216,7 +323,6 @@ static void maple_build_block(struct mapleq *mq)
 	*maple_sendptr++ = PHYSADDR(mq->recvbuf);
 	*maple_sendptr++ =
 	    mq->command | (to << 8) | (from << 16) | (len << 24);
-
 	while (len-- > 0)
 		*maple_sendptr++ = *lsendbuf++;
 }
@@ -224,22 +330,27 @@ static void maple_build_block(struct mapleq *mq)
 /* build up command queue */
 static void maple_send(void)
 {
-	int i;
-	int maple_packets;
+	int i, maple_packets = 0;
 	struct mapleq *mq, *nmq;
 
 	if (!list_empty(&maple_sentq))
 		return;
-	if (list_empty(&maple_waitq) || !maple_dma_done())
+	mutex_lock(&maple_wlist_lock);
+	if (list_empty(&maple_waitq) || !maple_dma_done()) {
+		mutex_unlock(&maple_wlist_lock);
 		return;
-	maple_packets = 0;
-	maple_sendptr = maple_lastptr = maple_sendbuf;
+	}
+	mutex_unlock(&maple_wlist_lock);
+	maple_lastptr = maple_sendbuf;
+	maple_sendptr = maple_sendbuf;
+	mutex_lock(&maple_wlist_lock);
 	list_for_each_entry_safe(mq, nmq, &maple_waitq, list) {
 		maple_build_block(mq);
 		list_move(&mq->list, &maple_sentq);
 		if (maple_packets++ > MAPLE_MAXPACKETS)
 			break;
 	}
+	mutex_unlock(&maple_wlist_lock);
 	if (maple_packets > 0) {
 		for (i = 0; i < (1 << MAPLE_DMA_PAGES); i++)
 			dma_cache_sync(0, maple_sendbuf + i * PAGE_SIZE,
@@ -247,7 +358,8 @@ static void maple_send(void)
 	}
 }
 
-static int attach_matching_maple_driver(struct device_driver *driver,
+/* check if there is a driver registered likely to match this device */
+static int check_matching_maple_driver(struct device_driver *driver,
 					void *devptr)
 {
 	struct maple_driver *maple_drv;
@@ -255,12 +367,8 @@ static int attach_matching_maple_driver(struct device_driver *driver,
 
 	mdev = devptr;
 	maple_drv = to_maple_driver(driver);
-	if (mdev->devinfo.function & be32_to_cpu(maple_drv->function)) {
-		if (maple_drv->connect(mdev) == 0) {
-			mdev->driver = maple_drv;
-			return 1;
-		}
-	}
+	if (mdev->devinfo.function & cpu_to_be32(maple_drv->function))
+		return 1;
 	return 0;
 }
 
@@ -268,11 +376,6 @@ static void maple_detach_driver(struct maple_device *mdev)
 {
 	if (!mdev)
 		return;
-	if (mdev->driver) {
-		if (mdev->driver->disconnect)
-			mdev->driver->disconnect(mdev);
-	}
-	mdev->driver = NULL;
 	device_unregister(&mdev->dev);
 	mdev = NULL;
 }
@@ -328,8 +431,8 @@ static void maple_attach_driver(struct maple_device *mdev)
 			mdev->port, mdev->unit, function);
 
 		matched =
-		    bus_for_each_drv(&maple_bus_type, NULL, mdev,
-				     attach_matching_maple_driver);
+			bus_for_each_drv(&maple_bus_type, NULL, mdev,
+				check_matching_maple_driver);
 
 		if (matched == 0) {
 			/* Driver does not exist yet */
@@ -373,45 +476,48 @@ static int detach_maple_device(struct device *device, void *portptr)
 
 static int setup_maple_commands(struct device *device, void *ignored)
 {
+	int add;
 	struct maple_device *maple_dev = to_maple_dev(device);
 
 	if ((maple_dev->interval > 0)
 	    && time_after(jiffies, maple_dev->when)) {
-		maple_dev->when = jiffies + maple_dev->interval;
-		maple_dev->mq->command = MAPLE_COMMAND_GETCOND;
-		maple_dev->mq->sendbuf = &maple_dev->function;
-		maple_dev->mq->length = 1;
-		maple_add_packet(maple_dev->mq);
-		liststatus++;
+		/* bounce if we cannot lock */
+		add = maple_add_packet(maple_dev,
+			be32_to_cpu(maple_dev->devinfo.function),
+			MAPLE_COMMAND_GETCOND, 1, NULL);
+		if (!add)
+			maple_dev->when = jiffies + maple_dev->interval;
 	} else {
-		if (time_after(jiffies, maple_pnp_time)) {
-			maple_dev->mq->command = MAPLE_COMMAND_DEVINFO;
-			maple_dev->mq->length = 0;
-			maple_add_packet(maple_dev->mq);
-			liststatus++;
-		}
+		if (time_after(jiffies, maple_pnp_time))
+			/* This will also bounce */
+			maple_add_packet(maple_dev, 0,
+				MAPLE_COMMAND_DEVINFO, 0, NULL);
 	}
-
 	return 0;
 }
 
 /* VBLANK bottom half - implemented via workqueue */
 static void maple_vblank_handler(struct work_struct *work)
 {
-	if (!maple_dma_done())
-		return;
-	if (!list_empty(&maple_sentq))
+	if (!list_empty(&maple_sentq) || !maple_dma_done())
 		return;
+
 	ctrl_outl(0, MAPLE_ENABLE);
-	liststatus = 0;
+
 	bus_for_each_dev(&maple_bus_type, NULL, NULL,
 			 setup_maple_commands);
+
 	if (time_after(jiffies, maple_pnp_time))
 		maple_pnp_time = jiffies + MAPLE_PNP_INTERVAL;
-	if (liststatus && list_empty(&maple_sentq)) {
-		INIT_LIST_HEAD(&maple_sentq);
+
+	mutex_lock(&maple_wlist_lock);
+	if (!list_empty(&maple_waitq) && list_empty(&maple_sentq)) {
+		mutex_unlock(&maple_wlist_lock);
 		maple_send();
+	} else {
+		mutex_unlock(&maple_wlist_lock);
 	}
+
 	maplebus_dma_reset();
 }
 
@@ -422,8 +528,8 @@ static void maple_map_subunits(struct maple_device *mdev, int submask)
 	struct maple_device *mdev_add;
 	struct maple_device_specify ds;
 
+	ds.port = mdev->port;
 	for (k = 0; k < 5; k++) {
-		ds.port = mdev->port;
 		ds.unit = k + 1;
 		retval =
 		    bus_for_each_dev(&maple_bus_type, NULL, &ds,
@@ -437,9 +543,9 @@ static void maple_map_subunits(struct maple_device *mdev, int submask)
 			mdev_add = maple_alloc_dev(mdev->port, k + 1);
 			if (!mdev_add)
 				return;
-			mdev_add->mq->command = MAPLE_COMMAND_DEVINFO;
-			mdev_add->mq->length = 0;
-			maple_add_packet(mdev_add->mq);
+			maple_add_packet(mdev_add, 0, MAPLE_COMMAND_DEVINFO,
+				0, NULL);
+			/* mark that we are checking sub devices */
 			scanning = 1;
 		}
 		submask = submask >> 1;
@@ -505,6 +611,28 @@ static void maple_response_devinfo(struct maple_device *mdev,
 	}
 }
 
+static void maple_port_rescan(void)
+{
+	int i;
+	struct maple_device *mdev;
+
+	fullscan = 1;
+	for (i = 0; i < MAPLE_PORTS; i++) {
+		if (checked[i] == false) {
+			fullscan = 0;
+			mdev = baseunits[i];
+			/*
+			 *  test lock in case scan has failed
+			 *  but device is still locked
+			 */
+			if (mutex_is_locked(&mdev->mq->mutex))
+				mutex_unlock(&mdev->mq->mutex);
+			maple_add_packet(mdev, 0, MAPLE_COMMAND_DEVINFO,
+				0, NULL);
+		}
+	}
+}
+
 /* maple dma end bottom half - implemented via workqueue */
 static void maple_dma_handler(struct work_struct *work)
 {
@@ -512,7 +640,6 @@ static void maple_dma_handler(struct work_struct *work)
 	struct maple_device *dev;
 	char *recvbuf;
 	enum maple_code code;
-	int i;
 
 	if (!maple_dma_done())
 		return;
@@ -522,6 +649,10 @@ static void maple_dma_handler(struct work_struct *work)
 			recvbuf = mq->recvbuf;
 			code = recvbuf[0];
 			dev = mq->dev;
+			kfree(mq->sendbuf);
+			mutex_unlock(&mq->mutex);
+			list_del_init(&mq->list);
+
 			switch (code) {
 			case MAPLE_RESPONSE_NONE:
 				maple_response_none(dev, mq);
@@ -558,26 +689,16 @@ static void maple_dma_handler(struct work_struct *work)
 				break;
 			}
 		}
-		INIT_LIST_HEAD(&maple_sentq);
+		/* if scanning is 1 then we have subdevices to check */
 		if (scanning == 1) {
 			maple_send();
 			scanning = 2;
 		} else
 			scanning = 0;
-
-		if (!fullscan) {
-			fullscan = 1;
-			for (i = 0; i < MAPLE_PORTS; i++) {
-				if (checked[i] == false) {
-					fullscan = 0;
-					dev = baseunits[i];
-					dev->mq->command =
-						MAPLE_COMMAND_DEVINFO;
-					dev->mq->length = 0;
-					maple_add_packet(dev->mq);
-				}
-			}
-		}
+		/*check if we have actually tested all ports yet */
+		if (!fullscan)
+			maple_port_rescan();
+		/* mark that we have been through the first scan */
 		if (started == 0)
 			started = 1;
 	}
@@ -622,16 +743,14 @@ static int maple_get_dma_buffer(void)
 static int match_maple_bus_driver(struct device *devptr,
 				  struct device_driver *drvptr)
 {
-	struct maple_driver *maple_drv;
-	struct maple_device *maple_dev;
+	struct maple_driver *maple_drv = to_maple_driver(drvptr);
+	struct maple_device *maple_dev = to_maple_dev(devptr);
 
-	maple_drv = container_of(drvptr, struct maple_driver, drv);
-	maple_dev = container_of(devptr, struct maple_device, dev);
 	/* Trap empty port case */
 	if (maple_dev->devinfo.function == 0xFFFFFFFF)
 		return 0;
 	else if (maple_dev->devinfo.function &
-		 be32_to_cpu(maple_drv->function))
+		 cpu_to_be32(maple_drv->function))
 		return 1;
 	return 0;
 }
@@ -713,6 +832,9 @@ static int __init maple_bus_init(void)
 	if (!maple_queue_cache)
 		goto cleanup_bothirqs;
 
+	INIT_LIST_HEAD(&maple_waitq);
+	INIT_LIST_HEAD(&maple_sentq);
+
 	/* setup maple ports */
 	for (i = 0; i < MAPLE_PORTS; i++) {
 		checked[i] = false;
@@ -723,9 +845,7 @@ static int __init maple_bus_init(void)
 				maple_free_dev(mdev[i]);
 			goto cleanup_cache;
 		}
-		mdev[i]->mq->command = MAPLE_COMMAND_DEVINFO;
-		mdev[i]->mq->length = 0;
-		maple_add_packet(mdev[i]->mq);
+		maple_add_packet(mdev[i], 0, MAPLE_COMMAND_DEVINFO, 0, NULL);
 		subdevice_map[i] = 0;
 	}
 
diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig
index 2303521b4f09..b9d0efb6803f 100644
--- a/drivers/spi/Kconfig
+++ b/drivers/spi/Kconfig
@@ -149,6 +149,12 @@ config SPI_OMAP24XX
 	  SPI master controller for OMAP24xx/OMAP34xx Multichannel SPI
 	  (McSPI) modules.
 
+config SPI_ORION
+	tristate "Orion SPI master (EXPERIMENTAL)"
+	depends on PLAT_ORION && EXPERIMENTAL
+	help
+	  This enables using the SPI master controller on the Orion chips.
+
 config SPI_PXA2XX
 	tristate "PXA2xx SSP SPI master"
 	depends on ARCH_PXA && EXPERIMENTAL
diff --git a/drivers/spi/Makefile b/drivers/spi/Makefile
index 7fca043ce723..ccf18de34e1e 100644
--- a/drivers/spi/Makefile
+++ b/drivers/spi/Makefile
@@ -21,6 +21,7 @@ obj-$(CONFIG_SPI_LM70_LLP)		+= spi_lm70llp.o
 obj-$(CONFIG_SPI_PXA2XX)		+= pxa2xx_spi.o
 obj-$(CONFIG_SPI_OMAP_UWIRE)		+= omap_uwire.o
 obj-$(CONFIG_SPI_OMAP24XX)		+= omap2_mcspi.o
+obj-$(CONFIG_SPI_ORION)			+= orion_spi.o
 obj-$(CONFIG_SPI_MPC52xx_PSC)		+= mpc52xx_psc_spi.o
 obj-$(CONFIG_SPI_MPC83xx)		+= spi_mpc83xx.o
 obj-$(CONFIG_SPI_S3C24XX_GPIO)		+= spi_s3c24xx_gpio.o
diff --git a/drivers/spi/atmel_spi.c b/drivers/spi/atmel_spi.c
index e81d59d78910..02f9320f3efc 100644
--- a/drivers/spi/atmel_spi.c
+++ b/drivers/spi/atmel_spi.c
@@ -20,9 +20,9 @@
 #include <linux/spi/spi.h>
 
 #include <asm/io.h>
-#include <asm/arch/board.h>
-#include <asm/arch/gpio.h>
-#include <asm/arch/cpu.h>
+#include <mach/board.h>
+#include <mach/gpio.h>
+#include <mach/cpu.h>
 
 #include "atmel_spi.h"
 
@@ -184,7 +184,8 @@ static void atmel_spi_next_xfer(struct spi_master *master,
 {
 	struct atmel_spi	*as = spi_master_get_devdata(master);
 	struct spi_transfer	*xfer;
-	u32			len, remaining, total;
+	u32			len, remaining;
+	u32			ieval;
 	dma_addr_t		tx_dma, rx_dma;
 
 	if (!as->current_transfer)
@@ -197,6 +198,8 @@ static void atmel_spi_next_xfer(struct spi_master *master,
 		xfer = NULL;
 
 	if (xfer) {
+		spi_writel(as, PTCR, SPI_BIT(RXTDIS) | SPI_BIT(TXTDIS));
+
 		len = xfer->len;
 		atmel_spi_next_xfer_data(master, xfer, &tx_dma, &rx_dma, &len);
 		remaining = xfer->len - len;
@@ -234,6 +237,8 @@ static void atmel_spi_next_xfer(struct spi_master *master,
 	as->next_transfer = xfer;
 
 	if (xfer) {
+		u32	total;
+
 		total = len;
 		atmel_spi_next_xfer_data(master, xfer, &tx_dma, &rx_dma, &len);
 		as->next_remaining_bytes = total - len;
@@ -250,9 +255,11 @@ static void atmel_spi_next_xfer(struct spi_master *master,
 			"  next xfer %p: len %u tx %p/%08x rx %p/%08x\n",
 			xfer, xfer->len, xfer->tx_buf, xfer->tx_dma,
 			xfer->rx_buf, xfer->rx_dma);
+		ieval = SPI_BIT(ENDRX) | SPI_BIT(OVRES);
 	} else {
 		spi_writel(as, RNCR, 0);
 		spi_writel(as, TNCR, 0);
+		ieval = SPI_BIT(RXBUFF) | SPI_BIT(ENDRX) | SPI_BIT(OVRES);
 	}
 
 	/* REVISIT: We're waiting for ENDRX before we start the next
@@ -265,7 +272,7 @@ static void atmel_spi_next_xfer(struct spi_master *master,
 	 *
 	 * It should be doable, though. Just not now...
 	 */
-	spi_writel(as, IER, SPI_BIT(ENDRX) | SPI_BIT(OVRES));
+	spi_writel(as, IER, ieval);
 	spi_writel(as, PTCR, SPI_BIT(TXTEN) | SPI_BIT(RXTEN));
 }
 
@@ -313,14 +320,14 @@ atmel_spi_dma_map_xfer(struct atmel_spi *as, struct spi_transfer *xfer)
 		xfer->tx_dma = dma_map_single(dev,
 				(void *) xfer->tx_buf, xfer->len,
 				DMA_TO_DEVICE);
-		if (dma_mapping_error(xfer->tx_dma))
+		if (dma_mapping_error(dev, xfer->tx_dma))
 			return -ENOMEM;
 	}
 	if (xfer->rx_buf) {
 		xfer->rx_dma = dma_map_single(dev,
 				xfer->rx_buf, xfer->len,
 				DMA_FROM_DEVICE);
-		if (dma_mapping_error(xfer->rx_dma)) {
+		if (dma_mapping_error(dev, xfer->rx_dma)) {
 			if (xfer->tx_buf)
 				dma_unmap_single(dev,
 						xfer->tx_dma, xfer->len,
@@ -396,7 +403,7 @@ atmel_spi_interrupt(int irq, void *dev_id)
 
 		ret = IRQ_HANDLED;
 
-		spi_writel(as, IDR, (SPI_BIT(ENDTX) | SPI_BIT(ENDRX)
+		spi_writel(as, IDR, (SPI_BIT(RXBUFF) | SPI_BIT(ENDRX)
 				     | SPI_BIT(OVRES)));
 
 		/*
@@ -418,7 +425,7 @@ atmel_spi_interrupt(int irq, void *dev_id)
 		if (xfer->delay_usecs)
 			udelay(xfer->delay_usecs);
 
-		dev_warn(master->dev.parent, "fifo overrun (%u/%u remaining)\n",
+		dev_warn(master->dev.parent, "overrun (%u/%u remaining)\n",
 			 spi_readl(as, TCR), spi_readl(as, RCR));
 
 		/*
@@ -442,7 +449,7 @@ atmel_spi_interrupt(int irq, void *dev_id)
 		spi_readl(as, SR);
 
 		atmel_spi_msg_done(master, as, msg, -EIO, 0);
-	} else if (pending & SPI_BIT(ENDRX)) {
+	} else if (pending & (SPI_BIT(RXBUFF) | SPI_BIT(ENDRX))) {
 		ret = IRQ_HANDLED;
 
 		spi_writel(as, IDR, pending);
diff --git a/drivers/spi/au1550_spi.c b/drivers/spi/au1550_spi.c
index 9149689c79d9..87b73e0169c5 100644
--- a/drivers/spi/au1550_spi.c
+++ b/drivers/spi/au1550_spi.c
@@ -334,7 +334,7 @@ static int au1550_spi_dma_rxtmp_alloc(struct au1550_spi *hw, unsigned size)
 	hw->dma_rx_tmpbuf_size = size;
 	hw->dma_rx_tmpbuf_addr = dma_map_single(hw->dev, hw->dma_rx_tmpbuf,
 			size, DMA_FROM_DEVICE);
-	if (dma_mapping_error(hw->dma_rx_tmpbuf_addr)) {
+	if (dma_mapping_error(hw->dev, hw->dma_rx_tmpbuf_addr)) {
 		kfree(hw->dma_rx_tmpbuf);
 		hw->dma_rx_tmpbuf = 0;
 		hw->dma_rx_tmpbuf_size = 0;
@@ -378,7 +378,7 @@ static int au1550_spi_dma_txrxb(struct spi_device *spi, struct spi_transfer *t)
 			dma_rx_addr = dma_map_single(hw->dev,
 					(void *)t->rx_buf,
 					t->len, DMA_FROM_DEVICE);
-			if (dma_mapping_error(dma_rx_addr))
+			if (dma_mapping_error(hw->dev, dma_rx_addr))
 				dev_err(hw->dev, "rx dma map error\n");
 		}
 	} else {
@@ -401,7 +401,7 @@ static int au1550_spi_dma_txrxb(struct spi_device *spi, struct spi_transfer *t)
 			dma_tx_addr = dma_map_single(hw->dev,
 					(void *)t->tx_buf,
 					t->len, DMA_TO_DEVICE);
-			if (dma_mapping_error(dma_tx_addr))
+			if (dma_mapping_error(hw->dev, dma_tx_addr))
 				dev_err(hw->dev, "tx dma map error\n");
 		}
 	} else {
diff --git a/drivers/spi/mpc52xx_psc_spi.c b/drivers/spi/mpc52xx_psc_spi.c
index 604e5f0a2d95..25eda71f4bf4 100644
--- a/drivers/spi/mpc52xx_psc_spi.c
+++ b/drivers/spi/mpc52xx_psc_spi.c
@@ -148,7 +148,6 @@ static int mpc52xx_psc_spi_transfer_rxtx(struct spi_device *spi,
 	unsigned rfalarm;
 	unsigned send_at_once = MPC52xx_PSC_BUFSIZE;
 	unsigned recv_at_once;
-	unsigned bpw = mps->bits_per_word / 8;
 
 	if (!t->tx_buf && !t->rx_buf && t->len)
 		return -EINVAL;
@@ -164,22 +163,15 @@ static int mpc52xx_psc_spi_transfer_rxtx(struct spi_device *spi,
 		}
 
 		dev_dbg(&spi->dev, "send %d bytes...\n", send_at_once);
-		if (tx_buf) {
-			for (; send_at_once; sb++, send_at_once--) {
-				/* set EOF flag */
-				if (mps->bits_per_word
-						&& (sb + 1) % bpw == 0)
-					out_8(&psc->ircr2, 0x01);
+		for (; send_at_once; sb++, send_at_once--) {
+			/* set EOF flag before the last word is sent */
+			if (send_at_once == 1)
+				out_8(&psc->ircr2, 0x01);
+
+			if (tx_buf)
 				out_8(&psc->mpc52xx_psc_buffer_8, tx_buf[sb]);
-			}
-		} else {
-			for (; send_at_once; sb++, send_at_once--) {
-				/* set EOF flag */
-				if (mps->bits_per_word
-						&& ((sb + 1) % bpw) == 0)
-					out_8(&psc->ircr2, 0x01);
+			else
 				out_8(&psc->mpc52xx_psc_buffer_8, 0);
-			}
 		}
 
 
diff --git a/drivers/spi/omap2_mcspi.c b/drivers/spi/omap2_mcspi.c
index b1cc148036c1..9d2186fd74aa 100644
--- a/drivers/spi/omap2_mcspi.c
+++ b/drivers/spi/omap2_mcspi.c
@@ -35,8 +35,8 @@
 
 #include <linux/spi/spi.h>
 
-#include <asm/arch/dma.h>
-#include <asm/arch/clock.h>
+#include <mach/dma.h>
+#include <mach/clock.h>
 
 
 #define OMAP2_MCSPI_MAX_FREQ		48000000
@@ -836,7 +836,7 @@ static int omap2_mcspi_transfer(struct spi_device *spi, struct spi_message *m)
 		if (tx_buf != NULL) {
 			t->tx_dma = dma_map_single(&spi->dev, (void *) tx_buf,
 					len, DMA_TO_DEVICE);
-			if (dma_mapping_error(t->tx_dma)) {
+			if (dma_mapping_error(&spi->dev, t->tx_dma)) {
 				dev_dbg(&spi->dev, "dma %cX %d bytes error\n",
 						'T', len);
 				return -EINVAL;
@@ -845,7 +845,7 @@ static int omap2_mcspi_transfer(struct spi_device *spi, struct spi_message *m)
 		if (rx_buf != NULL) {
 			t->rx_dma = dma_map_single(&spi->dev, rx_buf, t->len,
 					DMA_FROM_DEVICE);
-			if (dma_mapping_error(t->rx_dma)) {
+			if (dma_mapping_error(&spi->dev, t->rx_dma)) {
 				dev_dbg(&spi->dev, "dma %cX %d bytes error\n",
 						'R', len);
 				if (tx_buf != NULL)
diff --git a/drivers/spi/omap_uwire.c b/drivers/spi/omap_uwire.c
index d9ae111c27ae..5515eb97d7c5 100644
--- a/drivers/spi/omap_uwire.c
+++ b/drivers/spi/omap_uwire.c
@@ -47,12 +47,12 @@
 
 #include <asm/system.h>
 #include <asm/irq.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 #include <asm/mach-types.h>
 
-#include <asm/arch/mux.h>
-#include <asm/arch/omap730.h>	/* OMAP730_IO_CONF registers */
+#include <mach/mux.h>
+#include <mach/omap730.h>	/* OMAP730_IO_CONF registers */
 
 
 /* FIXME address is now a platform device resource,
diff --git a/drivers/spi/orion_spi.c b/drivers/spi/orion_spi.c
new file mode 100644
index 000000000000..c4eaacd6e553
--- /dev/null
+++ b/drivers/spi/orion_spi.c
@@ -0,0 +1,574 @@
+/*
+ * orion_spi.c -- Marvell Orion SPI controller driver
+ *
+ * Author: Shadi Ammouri <shadi@marvell.com>
+ * Copyright (C) 2007-2008 Marvell Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/delay.h>
+#include <linux/platform_device.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/orion_spi.h>
+#include <asm/unaligned.h>
+
+#define DRIVER_NAME			"orion_spi"
+
+#define ORION_NUM_CHIPSELECTS		1 /* only one slave is supported*/
+#define ORION_SPI_WAIT_RDY_MAX_LOOP	2000 /* in usec */
+
+#define ORION_SPI_IF_CTRL_REG		0x00
+#define ORION_SPI_IF_CONFIG_REG		0x04
+#define ORION_SPI_DATA_OUT_REG		0x08
+#define ORION_SPI_DATA_IN_REG		0x0c
+#define ORION_SPI_INT_CAUSE_REG		0x10
+
+#define ORION_SPI_IF_8_16_BIT_MODE	(1 << 5)
+#define ORION_SPI_CLK_PRESCALE_MASK	0x1F
+
+struct orion_spi {
+	struct work_struct	work;
+
+	/* Lock access to transfer list.	*/
+	spinlock_t		lock;
+
+	struct list_head	msg_queue;
+	struct spi_master	*master;
+	void __iomem		*base;
+	unsigned int		max_speed;
+	unsigned int		min_speed;
+	struct orion_spi_info	*spi_info;
+};
+
+static struct workqueue_struct *orion_spi_wq;
+
+static inline void __iomem *spi_reg(struct orion_spi *orion_spi, u32 reg)
+{
+	return orion_spi->base + reg;
+}
+
+static inline void
+orion_spi_setbits(struct orion_spi *orion_spi, u32 reg, u32 mask)
+{
+	void __iomem *reg_addr = spi_reg(orion_spi, reg);
+	u32 val;
+
+	val = readl(reg_addr);
+	val |= mask;
+	writel(val, reg_addr);
+}
+
+static inline void
+orion_spi_clrbits(struct orion_spi *orion_spi, u32 reg, u32 mask)
+{
+	void __iomem *reg_addr = spi_reg(orion_spi, reg);
+	u32 val;
+
+	val = readl(reg_addr);
+	val &= ~mask;
+	writel(val, reg_addr);
+}
+
+static int orion_spi_set_transfer_size(struct orion_spi *orion_spi, int size)
+{
+	if (size == 16) {
+		orion_spi_setbits(orion_spi, ORION_SPI_IF_CONFIG_REG,
+				  ORION_SPI_IF_8_16_BIT_MODE);
+	} else if (size == 8) {
+		orion_spi_clrbits(orion_spi, ORION_SPI_IF_CONFIG_REG,
+				  ORION_SPI_IF_8_16_BIT_MODE);
+	} else {
+		pr_debug("Bad bits per word value %d (only 8 or 16 are "
+			 "allowed).\n", size);
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static int orion_spi_baudrate_set(struct spi_device *spi, unsigned int speed)
+{
+	u32 tclk_hz;
+	u32 rate;
+	u32 prescale;
+	u32 reg;
+	struct orion_spi *orion_spi;
+
+	orion_spi = spi_master_get_devdata(spi->master);
+
+	tclk_hz = orion_spi->spi_info->tclk;
+
+	/*
+	 * the supported rates are: 4,6,8...30
+	 * round up as we look for equal or less speed
+	 */
+	rate = DIV_ROUND_UP(tclk_hz, speed);
+	rate = roundup(rate, 2);
+
+	/* check if requested speed is too small */
+	if (rate > 30)
+		return -EINVAL;
+
+	if (rate < 4)
+		rate = 4;
+
+	/* Convert the rate to SPI clock divisor value.	*/
+	prescale = 0x10 + rate/2;
+
+	reg = readl(spi_reg(orion_spi, ORION_SPI_IF_CONFIG_REG));
+	reg = ((reg & ~ORION_SPI_CLK_PRESCALE_MASK) | prescale);
+	writel(reg, spi_reg(orion_spi, ORION_SPI_IF_CONFIG_REG));
+
+	return 0;
+}
+
+/*
+ * called only when no transfer is active on the bus
+ */
+static int
+orion_spi_setup_transfer(struct spi_device *spi, struct spi_transfer *t)
+{
+	struct orion_spi *orion_spi;
+	unsigned int speed = spi->max_speed_hz;
+	unsigned int bits_per_word = spi->bits_per_word;
+	int	rc;
+
+	orion_spi = spi_master_get_devdata(spi->master);
+
+	if ((t != NULL) && t->speed_hz)
+		speed = t->speed_hz;
+
+	if ((t != NULL) && t->bits_per_word)
+		bits_per_word = t->bits_per_word;
+
+	rc = orion_spi_baudrate_set(spi, speed);
+	if (rc)
+		return rc;
+
+	return orion_spi_set_transfer_size(orion_spi, bits_per_word);
+}
+
+static void orion_spi_set_cs(struct orion_spi *orion_spi, int enable)
+{
+	if (enable)
+		orion_spi_setbits(orion_spi, ORION_SPI_IF_CTRL_REG, 0x1);
+	else
+		orion_spi_clrbits(orion_spi, ORION_SPI_IF_CTRL_REG, 0x1);
+}
+
+static inline int orion_spi_wait_till_ready(struct orion_spi *orion_spi)
+{
+	int i;
+
+	for (i = 0; i < ORION_SPI_WAIT_RDY_MAX_LOOP; i++) {
+		if (readl(spi_reg(orion_spi, ORION_SPI_INT_CAUSE_REG)))
+			return 1;
+		else
+			udelay(1);
+	}
+
+	return -1;
+}
+
+static inline int
+orion_spi_write_read_8bit(struct spi_device *spi,
+			  const u8 **tx_buf, u8 **rx_buf)
+{
+	void __iomem *tx_reg, *rx_reg, *int_reg;
+	struct orion_spi *orion_spi;
+
+	orion_spi = spi_master_get_devdata(spi->master);
+	tx_reg = spi_reg(orion_spi, ORION_SPI_DATA_OUT_REG);
+	rx_reg = spi_reg(orion_spi, ORION_SPI_DATA_IN_REG);
+	int_reg = spi_reg(orion_spi, ORION_SPI_INT_CAUSE_REG);
+
+	/* clear the interrupt cause register */
+	writel(0x0, int_reg);
+
+	if (tx_buf && *tx_buf)
+		writel(*(*tx_buf)++, tx_reg);
+	else
+		writel(0, tx_reg);
+
+	if (orion_spi_wait_till_ready(orion_spi) < 0) {
+		dev_err(&spi->dev, "TXS timed out\n");
+		return -1;
+	}
+
+	if (rx_buf && *rx_buf)
+		*(*rx_buf)++ = readl(rx_reg);
+
+	return 1;
+}
+
+static inline int
+orion_spi_write_read_16bit(struct spi_device *spi,
+			   const u16 **tx_buf, u16 **rx_buf)
+{
+	void __iomem *tx_reg, *rx_reg, *int_reg;
+	struct orion_spi *orion_spi;
+
+	orion_spi = spi_master_get_devdata(spi->master);
+	tx_reg = spi_reg(orion_spi, ORION_SPI_DATA_OUT_REG);
+	rx_reg = spi_reg(orion_spi, ORION_SPI_DATA_IN_REG);
+	int_reg = spi_reg(orion_spi, ORION_SPI_INT_CAUSE_REG);
+
+	/* clear the interrupt cause register */
+	writel(0x0, int_reg);
+
+	if (tx_buf && *tx_buf)
+		writel(__cpu_to_le16(get_unaligned((*tx_buf)++)), tx_reg);
+	else
+		writel(0, tx_reg);
+
+	if (orion_spi_wait_till_ready(orion_spi) < 0) {
+		dev_err(&spi->dev, "TXS timed out\n");
+		return -1;
+	}
+
+	if (rx_buf && *rx_buf)
+		put_unaligned(__le16_to_cpu(readl(rx_reg)), (*rx_buf)++);
+
+	return 1;
+}
+
+static unsigned int
+orion_spi_write_read(struct spi_device *spi, struct spi_transfer *xfer)
+{
+	struct orion_spi *orion_spi;
+	unsigned int count;
+	int word_len;
+
+	orion_spi = spi_master_get_devdata(spi->master);
+	word_len = spi->bits_per_word;
+	count = xfer->len;
+
+	if (word_len == 8) {
+		const u8 *tx = xfer->tx_buf;
+		u8 *rx = xfer->rx_buf;
+
+		do {
+			if (orion_spi_write_read_8bit(spi, &tx, &rx) < 0)
+				goto out;
+			count--;
+		} while (count);
+	} else if (word_len == 16) {
+		const u16 *tx = xfer->tx_buf;
+		u16 *rx = xfer->rx_buf;
+
+		do {
+			if (orion_spi_write_read_16bit(spi, &tx, &rx) < 0)
+				goto out;
+			count -= 2;
+		} while (count);
+	}
+
+out:
+	return xfer->len - count;
+}
+
+
+static void orion_spi_work(struct work_struct *work)
+{
+	struct orion_spi *orion_spi =
+		container_of(work, struct orion_spi, work);
+
+	spin_lock_irq(&orion_spi->lock);
+	while (!list_empty(&orion_spi->msg_queue)) {
+		struct spi_message *m;
+		struct spi_device *spi;
+		struct spi_transfer *t = NULL;
+		int par_override = 0;
+		int status = 0;
+		int cs_active = 0;
+
+		m = container_of(orion_spi->msg_queue.next, struct spi_message,
+				 queue);
+
+		list_del_init(&m->queue);
+		spin_unlock_irq(&orion_spi->lock);
+
+		spi = m->spi;
+
+		/* Load defaults */
+		status = orion_spi_setup_transfer(spi, NULL);
+
+		if (status < 0)
+			goto msg_done;
+
+		list_for_each_entry(t, &m->transfers, transfer_list) {
+			if (par_override || t->speed_hz || t->bits_per_word) {
+				par_override = 1;
+				status = orion_spi_setup_transfer(spi, t);
+				if (status < 0)
+					break;
+				if (!t->speed_hz && !t->bits_per_word)
+					par_override = 0;
+			}
+
+			if (!cs_active) {
+				orion_spi_set_cs(orion_spi, 1);
+				cs_active = 1;
+			}
+
+			if (t->len)
+				m->actual_length +=
+					orion_spi_write_read(spi, t);
+
+			if (t->delay_usecs)
+				udelay(t->delay_usecs);
+
+			if (t->cs_change) {
+				orion_spi_set_cs(orion_spi, 0);
+				cs_active = 0;
+			}
+		}
+
+msg_done:
+		if (cs_active)
+			orion_spi_set_cs(orion_spi, 0);
+
+		m->status = status;
+		m->complete(m->context);
+
+		spin_lock_irq(&orion_spi->lock);
+	}
+
+	spin_unlock_irq(&orion_spi->lock);
+}
+
+static int __init orion_spi_reset(struct orion_spi *orion_spi)
+{
+	/* Verify that the CS is deasserted */
+	orion_spi_set_cs(orion_spi, 0);
+
+	return 0;
+}
+
+static int orion_spi_setup(struct spi_device *spi)
+{
+	struct orion_spi *orion_spi;
+
+	orion_spi = spi_master_get_devdata(spi->master);
+
+	if (spi->mode) {
+		dev_err(&spi->dev, "setup: unsupported mode bits %x\n",
+			spi->mode);
+		return -EINVAL;
+	}
+
+	if (spi->bits_per_word == 0)
+		spi->bits_per_word = 8;
+
+	if ((spi->max_speed_hz == 0)
+			|| (spi->max_speed_hz > orion_spi->max_speed))
+		spi->max_speed_hz = orion_spi->max_speed;
+
+	if (spi->max_speed_hz < orion_spi->min_speed) {
+		dev_err(&spi->dev, "setup: requested speed too low %d Hz\n",
+			spi->max_speed_hz);
+		return -EINVAL;
+	}
+
+	/*
+	 * baudrate & width will be set orion_spi_setup_transfer
+	 */
+	return 0;
+}
+
+static int orion_spi_transfer(struct spi_device *spi, struct spi_message *m)
+{
+	struct orion_spi *orion_spi;
+	struct spi_transfer *t = NULL;
+	unsigned long flags;
+
+	m->actual_length = 0;
+	m->status = 0;
+
+	/* reject invalid messages and transfers */
+	if (list_empty(&m->transfers) || !m->complete)
+		return -EINVAL;
+
+	orion_spi = spi_master_get_devdata(spi->master);
+
+	list_for_each_entry(t, &m->transfers, transfer_list) {
+		unsigned int bits_per_word = spi->bits_per_word;
+
+		if (t->tx_buf == NULL && t->rx_buf == NULL && t->len) {
+			dev_err(&spi->dev,
+				"message rejected : "
+				"invalid transfer data buffers\n");
+			goto msg_rejected;
+		}
+
+		if ((t != NULL) && t->bits_per_word)
+			bits_per_word = t->bits_per_word;
+
+		if ((bits_per_word != 8) && (bits_per_word != 16)) {
+			dev_err(&spi->dev,
+				"message rejected : "
+				"invalid transfer bits_per_word (%d bits)\n",
+				bits_per_word);
+			goto msg_rejected;
+		}
+		/*make sure buffer length is even when working in 16 bit mode*/
+		if ((t != NULL) && (t->bits_per_word == 16) && (t->len & 1)) {
+			dev_err(&spi->dev,
+				"message rejected : "
+				"odd data length (%d) while in 16 bit mode\n",
+				t->len);
+			goto msg_rejected;
+		}
+
+		if (t->speed_hz < orion_spi->min_speed) {
+			dev_err(&spi->dev,
+				"message rejected : "
+				"device min speed (%d Hz) exceeds "
+				"required transfer speed (%d Hz)\n",
+				orion_spi->min_speed, t->speed_hz);
+			goto msg_rejected;
+		}
+	}
+
+
+	spin_lock_irqsave(&orion_spi->lock, flags);
+	list_add_tail(&m->queue, &orion_spi->msg_queue);
+	queue_work(orion_spi_wq, &orion_spi->work);
+	spin_unlock_irqrestore(&orion_spi->lock, flags);
+
+	return 0;
+msg_rejected:
+	/* Message rejected and not queued */
+	m->status = -EINVAL;
+	if (m->complete)
+		m->complete(m->context);
+	return -EINVAL;
+}
+
+static int __init orion_spi_probe(struct platform_device *pdev)
+{
+	struct spi_master *master;
+	struct orion_spi *spi;
+	struct resource *r;
+	struct orion_spi_info *spi_info;
+	int status = 0;
+
+	spi_info = pdev->dev.platform_data;
+
+	master = spi_alloc_master(&pdev->dev, sizeof *spi);
+	if (master == NULL) {
+		dev_dbg(&pdev->dev, "master allocation failed\n");
+		return -ENOMEM;
+	}
+
+	if (pdev->id != -1)
+		master->bus_num = pdev->id;
+
+	master->setup = orion_spi_setup;
+	master->transfer = orion_spi_transfer;
+	master->num_chipselect = ORION_NUM_CHIPSELECTS;
+
+	dev_set_drvdata(&pdev->dev, master);
+
+	spi = spi_master_get_devdata(master);
+	spi->master = master;
+	spi->spi_info = spi_info;
+
+	spi->max_speed = DIV_ROUND_UP(spi_info->tclk, 4);
+	spi->min_speed = DIV_ROUND_UP(spi_info->tclk, 30);
+
+	r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (r == NULL) {
+		status = -ENODEV;
+		goto out;
+	}
+
+	if (!request_mem_region(r->start, (r->end - r->start) + 1,
+				pdev->dev.bus_id)) {
+		status = -EBUSY;
+		goto out;
+	}
+	spi->base = ioremap(r->start, SZ_1K);
+
+	INIT_WORK(&spi->work, orion_spi_work);
+
+	spin_lock_init(&spi->lock);
+	INIT_LIST_HEAD(&spi->msg_queue);
+
+	if (orion_spi_reset(spi) < 0)
+		goto out_rel_mem;
+
+	status = spi_register_master(master);
+	if (status < 0)
+		goto out_rel_mem;
+
+	return status;
+
+out_rel_mem:
+	release_mem_region(r->start, (r->end - r->start) + 1);
+
+out:
+	spi_master_put(master);
+	return status;
+}
+
+
+static int __exit orion_spi_remove(struct platform_device *pdev)
+{
+	struct spi_master *master;
+	struct orion_spi *spi;
+	struct resource *r;
+
+	master = dev_get_drvdata(&pdev->dev);
+	spi = spi_master_get_devdata(master);
+
+	cancel_work_sync(&spi->work);
+
+	r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	release_mem_region(r->start, (r->end - r->start) + 1);
+
+	spi_unregister_master(master);
+
+	return 0;
+}
+
+MODULE_ALIAS("platform:" DRIVER_NAME);
+
+static struct platform_driver orion_spi_driver = {
+	.driver = {
+		.name	= DRIVER_NAME,
+		.owner	= THIS_MODULE,
+	},
+	.remove		= __exit_p(orion_spi_remove),
+};
+
+static int __init orion_spi_init(void)
+{
+	orion_spi_wq = create_singlethread_workqueue(
+				orion_spi_driver.driver.name);
+	if (orion_spi_wq == NULL)
+		return -ENOMEM;
+
+	return platform_driver_probe(&orion_spi_driver, orion_spi_probe);
+}
+module_init(orion_spi_init);
+
+static void __exit orion_spi_exit(void)
+{
+	flush_workqueue(orion_spi_wq);
+	platform_driver_unregister(&orion_spi_driver);
+
+	destroy_workqueue(orion_spi_wq);
+}
+module_exit(orion_spi_exit);
+
+MODULE_DESCRIPTION("Orion SPI driver");
+MODULE_AUTHOR("Shadi Ammouri <shadi@marvell.com>");
+MODULE_LICENSE("GPL");
diff --git a/drivers/spi/pxa2xx_spi.c b/drivers/spi/pxa2xx_spi.c
index 0c452c46ab07..34c7c9875681 100644
--- a/drivers/spi/pxa2xx_spi.c
+++ b/drivers/spi/pxa2xx_spi.c
@@ -31,15 +31,14 @@
 
 #include <asm/io.h>
 #include <asm/irq.h>
-#include <asm/hardware.h>
 #include <asm/delay.h>
 #include <asm/dma.h>
 
-#include <asm/arch/hardware.h>
-#include <asm/arch/pxa-regs.h>
-#include <asm/arch/regs-ssp.h>
-#include <asm/arch/ssp.h>
-#include <asm/arch/pxa2xx_spi.h>
+#include <mach/hardware.h>
+#include <mach/pxa-regs.h>
+#include <mach/regs-ssp.h>
+#include <mach/ssp.h>
+#include <mach/pxa2xx_spi.h>
 
 MODULE_AUTHOR("Stephen Street");
 MODULE_DESCRIPTION("PXA2xx SSP SPI Controller");
@@ -353,7 +352,7 @@ static int map_dma_buffers(struct driver_data *drv_data)
 	drv_data->rx_dma = dma_map_single(dev, drv_data->rx,
 						drv_data->rx_map_len,
 						DMA_FROM_DEVICE);
-	if (dma_mapping_error(drv_data->rx_dma))
+	if (dma_mapping_error(dev, drv_data->rx_dma))
 		return 0;
 
 	/* Stream map the tx buffer */
@@ -361,7 +360,7 @@ static int map_dma_buffers(struct driver_data *drv_data)
 						drv_data->tx_map_len,
 						DMA_TO_DEVICE);
 
-	if (dma_mapping_error(drv_data->tx_dma)) {
+	if (dma_mapping_error(dev, drv_data->tx_dma)) {
 		dma_unmap_single(dev, drv_data->rx_dma,
 					drv_data->rx_map_len, DMA_FROM_DEVICE);
 		return 0;
diff --git a/drivers/spi/spi.c b/drivers/spi/spi.c
index ecca4a6a6f94..75e86865234c 100644
--- a/drivers/spi/spi.c
+++ b/drivers/spi/spi.c
@@ -178,6 +178,114 @@ struct boardinfo {
 static LIST_HEAD(board_list);
 static DEFINE_MUTEX(board_lock);
 
+/**
+ * spi_alloc_device - Allocate a new SPI device
+ * @master: Controller to which device is connected
+ * Context: can sleep
+ *
+ * Allows a driver to allocate and initialize a spi_device without
+ * registering it immediately.  This allows a driver to directly
+ * fill the spi_device with device parameters before calling
+ * spi_add_device() on it.
+ *
+ * Caller is responsible to call spi_add_device() on the returned
+ * spi_device structure to add it to the SPI master.  If the caller
+ * needs to discard the spi_device without adding it, then it should
+ * call spi_dev_put() on it.
+ *
+ * Returns a pointer to the new device, or NULL.
+ */
+struct spi_device *spi_alloc_device(struct spi_master *master)
+{
+	struct spi_device	*spi;
+	struct device		*dev = master->dev.parent;
+
+	if (!spi_master_get(master))
+		return NULL;
+
+	spi = kzalloc(sizeof *spi, GFP_KERNEL);
+	if (!spi) {
+		dev_err(dev, "cannot alloc spi_device\n");
+		spi_master_put(master);
+		return NULL;
+	}
+
+	spi->master = master;
+	spi->dev.parent = dev;
+	spi->dev.bus = &spi_bus_type;
+	spi->dev.release = spidev_release;
+	device_initialize(&spi->dev);
+	return spi;
+}
+EXPORT_SYMBOL_GPL(spi_alloc_device);
+
+/**
+ * spi_add_device - Add spi_device allocated with spi_alloc_device
+ * @spi: spi_device to register
+ *
+ * Companion function to spi_alloc_device.  Devices allocated with
+ * spi_alloc_device can be added onto the spi bus with this function.
+ *
+ * Returns 0 on success; negative errno on failure
+ */
+int spi_add_device(struct spi_device *spi)
+{
+	static DEFINE_MUTEX(spi_add_lock);
+	struct device *dev = spi->master->dev.parent;
+	int status;
+
+	/* Chipselects are numbered 0..max; validate. */
+	if (spi->chip_select >= spi->master->num_chipselect) {
+		dev_err(dev, "cs%d >= max %d\n",
+			spi->chip_select,
+			spi->master->num_chipselect);
+		return -EINVAL;
+	}
+
+	/* Set the bus ID string */
+	snprintf(spi->dev.bus_id, sizeof spi->dev.bus_id,
+			"%s.%u", spi->master->dev.bus_id,
+			spi->chip_select);
+
+
+	/* We need to make sure there's no other device with this
+	 * chipselect **BEFORE** we call setup(), else we'll trash
+	 * its configuration.  Lock against concurrent add() calls.
+	 */
+	mutex_lock(&spi_add_lock);
+
+	if (bus_find_device_by_name(&spi_bus_type, NULL, spi->dev.bus_id)
+			!= NULL) {
+		dev_err(dev, "chipselect %d already in use\n",
+				spi->chip_select);
+		status = -EBUSY;
+		goto done;
+	}
+
+	/* Drivers may modify this initial i/o setup, but will
+	 * normally rely on the device being setup.  Devices
+	 * using SPI_CS_HIGH can't coexist well otherwise...
+	 */
+	status = spi->master->setup(spi);
+	if (status < 0) {
+		dev_err(dev, "can't %s %s, status %d\n",
+				"setup", spi->dev.bus_id, status);
+		goto done;
+	}
+
+	/* Device may be bound to an active driver when this returns */
+	status = device_add(&spi->dev);
+	if (status < 0)
+		dev_err(dev, "can't %s %s, status %d\n",
+				"add", spi->dev.bus_id, status);
+	else
+		dev_dbg(dev, "registered child %s\n", spi->dev.bus_id);
+
+done:
+	mutex_unlock(&spi_add_lock);
+	return status;
+}
+EXPORT_SYMBOL_GPL(spi_add_device);
 
 /**
  * spi_new_device - instantiate one new SPI device
@@ -197,7 +305,6 @@ struct spi_device *spi_new_device(struct spi_master *master,
 				  struct spi_board_info *chip)
 {
 	struct spi_device	*proxy;
-	struct device		*dev = master->dev.parent;
 	int			status;
 
 	/* NOTE:  caller did any chip->bus_num checks necessary.
@@ -207,66 +314,28 @@ struct spi_device *spi_new_device(struct spi_master *master,
 	 * suggests syslogged diagnostics are best here (ugh).
 	 */
 
-	/* Chipselects are numbered 0..max; validate. */
-	if (chip->chip_select >= master->num_chipselect) {
-		dev_err(dev, "cs%d > max %d\n",
-			chip->chip_select,
-			master->num_chipselect);
-		return NULL;
-	}
-
-	if (!spi_master_get(master))
+	proxy = spi_alloc_device(master);
+	if (!proxy)
 		return NULL;
 
 	WARN_ON(strlen(chip->modalias) >= sizeof(proxy->modalias));
 
-	proxy = kzalloc(sizeof *proxy, GFP_KERNEL);
-	if (!proxy) {
-		dev_err(dev, "can't alloc dev for cs%d\n",
-			chip->chip_select);
-		goto fail;
-	}
-	proxy->master = master;
 	proxy->chip_select = chip->chip_select;
 	proxy->max_speed_hz = chip->max_speed_hz;
 	proxy->mode = chip->mode;
 	proxy->irq = chip->irq;
 	strlcpy(proxy->modalias, chip->modalias, sizeof(proxy->modalias));
-
-	snprintf(proxy->dev.bus_id, sizeof proxy->dev.bus_id,
-			"%s.%u", master->dev.bus_id,
-			chip->chip_select);
-	proxy->dev.parent = dev;
-	proxy->dev.bus = &spi_bus_type;
 	proxy->dev.platform_data = (void *) chip->platform_data;
 	proxy->controller_data = chip->controller_data;
 	proxy->controller_state = NULL;
-	proxy->dev.release = spidev_release;
 
-	/* drivers may modify this initial i/o setup */
-	status = master->setup(proxy);
+	status = spi_add_device(proxy);
 	if (status < 0) {
-		dev_err(dev, "can't %s %s, status %d\n",
-				"setup", proxy->dev.bus_id, status);
-		goto fail;
+		spi_dev_put(proxy);
+		return NULL;
 	}
 
-	/* driver core catches callers that misbehave by defining
-	 * devices that already exist.
-	 */
-	status = device_register(&proxy->dev);
-	if (status < 0) {
-		dev_err(dev, "can't %s %s, status %d\n",
-				"add", proxy->dev.bus_id, status);
-		goto fail;
-	}
-	dev_dbg(dev, "registered child %s\n", proxy->dev.bus_id);
 	return proxy;
-
-fail:
-	spi_master_put(master);
-	kfree(proxy);
-	return NULL;
 }
 EXPORT_SYMBOL_GPL(spi_new_device);
 
diff --git a/drivers/spi/spi_imx.c b/drivers/spi/spi_imx.c
index 54ac7bea5f8c..61ba147e384d 100644
--- a/drivers/spi/spi_imx.c
+++ b/drivers/spi/spi_imx.c
@@ -33,12 +33,11 @@
 
 #include <asm/io.h>
 #include <asm/irq.h>
-#include <asm/hardware.h>
 #include <asm/delay.h>
 
-#include <asm/arch/hardware.h>
-#include <asm/arch/imx-dma.h>
-#include <asm/arch/spi_imx.h>
+#include <mach/hardware.h>
+#include <mach/imx-dma.h>
+#include <mach/spi_imx.h>
 
 /*-------------------------------------------------------------------------*/
 /* SPI Registers offsets from peripheral base address */
@@ -491,7 +490,7 @@ static int map_dma_buffers(struct driver_data *drv_data)
 							buf,
 							drv_data->tx_map_len,
 							DMA_TO_DEVICE);
-			if (dma_mapping_error(drv_data->tx_dma))
+			if (dma_mapping_error(dev, drv_data->tx_dma))
 				return -1;
 
 			drv_data->tx_dma_needs_unmap = 1;
@@ -516,7 +515,7 @@ static int map_dma_buffers(struct driver_data *drv_data)
 					buf,
 					drv_data->len,
 					DMA_FROM_DEVICE);
-		if (dma_mapping_error(drv_data->rx_dma))
+		if (dma_mapping_error(dev, drv_data->rx_dma))
 			return -1;
 		drv_data->rx_dma_needs_unmap = 1;
 	}
@@ -534,7 +533,7 @@ static int map_dma_buffers(struct driver_data *drv_data)
 					buf,
 					drv_data->tx_map_len,
 					DMA_TO_DEVICE);
-	if (dma_mapping_error(drv_data->tx_dma)) {
+	if (dma_mapping_error(dev, drv_data->tx_dma)) {
 		if (drv_data->rx_dma) {
 			dma_unmap_single(dev,
 					drv_data->rx_dma,
diff --git a/drivers/spi/spi_s3c24xx.c b/drivers/spi/spi_s3c24xx.c
index 0885cc357a37..98abc73c1a1d 100644
--- a/drivers/spi/spi_s3c24xx.c
+++ b/drivers/spi/spi_s3c24xx.c
@@ -25,11 +25,11 @@
 
 #include <asm/io.h>
 #include <asm/dma.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 
-#include <asm/arch/regs-gpio.h>
+#include <mach/regs-gpio.h>
 #include <asm/plat-s3c24xx/regs-spi.h>
-#include <asm/arch/spi.h>
+#include <mach/spi.h>
 
 struct s3c24xx_spi {
 	/* bitbang has to be first */
@@ -236,6 +236,19 @@ static irqreturn_t s3c24xx_spi_irq(int irq, void *dev)
 	return IRQ_HANDLED;
 }
 
+static void s3c24xx_spi_initialsetup(struct s3c24xx_spi *hw)
+{
+	/* for the moment, permanently enable the clock */
+
+	clk_enable(hw->clk);
+
+	/* program defaults into the registers */
+
+	writeb(0xff, hw->regs + S3C2410_SPPRE);
+	writeb(SPPIN_DEFAULT, hw->regs + S3C2410_SPPIN);
+	writeb(SPCON_DEFAULT, hw->regs + S3C2410_SPCON);
+}
+
 static int __init s3c24xx_spi_probe(struct platform_device *pdev)
 {
 	struct s3c2410_spi_info *pdata;
@@ -270,6 +283,7 @@ static int __init s3c24xx_spi_probe(struct platform_device *pdev)
 	/* setup the master state. */
 
 	master->num_chipselect = hw->pdata->num_cs;
+	master->bus_num = pdata->bus_num;
 
 	/* setup the state for the bitbang driver */
 
@@ -326,15 +340,7 @@ static int __init s3c24xx_spi_probe(struct platform_device *pdev)
 		goto err_no_clk;
 	}
 
-	/* for the moment, permanently enable the clock */
-
-	clk_enable(hw->clk);
-
-	/* program defaults into the registers */
-
-	writeb(0xff, hw->regs + S3C2410_SPPRE);
-	writeb(SPPIN_DEFAULT, hw->regs + S3C2410_SPPIN);
-	writeb(SPCON_DEFAULT, hw->regs + S3C2410_SPCON);
+	s3c24xx_spi_initialsetup(hw);
 
 	/* setup any gpio we can */
 
@@ -414,7 +420,7 @@ static int s3c24xx_spi_resume(struct platform_device *pdev)
 {
 	struct s3c24xx_spi *hw = platform_get_drvdata(pdev);
 
-	clk_enable(hw->clk);
+	s3c24xx_spi_initialsetup(hw);
 	return 0;
 }
 
diff --git a/drivers/spi/spi_s3c24xx_gpio.c b/drivers/spi/spi_s3c24xx_gpio.c
index e33f6145c560..cc1f647f579b 100644
--- a/drivers/spi/spi_s3c24xx_gpio.c
+++ b/drivers/spi/spi_s3c24xx_gpio.c
@@ -21,9 +21,9 @@
 #include <linux/spi/spi.h>
 #include <linux/spi/spi_bitbang.h>
 
-#include <asm/arch/regs-gpio.h>
-#include <asm/arch/spi-gpio.h>
-#include <asm/hardware.h>
+#include <mach/regs-gpio.h>
+#include <mach/spi-gpio.h>
+#include <mach/hardware.h>
 
 struct s3c2410_spigpio {
 	struct spi_bitbang		 bitbang;
diff --git a/drivers/ssb/main.c b/drivers/ssb/main.c
index d831a2beff39..87ab2443e66d 100644
--- a/drivers/ssb/main.c
+++ b/drivers/ssb/main.c
@@ -1165,15 +1165,19 @@ EXPORT_SYMBOL(ssb_dma_translation);
 
 int ssb_dma_set_mask(struct ssb_device *dev, u64 mask)
 {
+#ifdef CONFIG_SSB_PCIHOST
 	int err;
+#endif
 
 	switch (dev->bus->bustype) {
 	case SSB_BUSTYPE_PCI:
+#ifdef CONFIG_SSB_PCIHOST
 		err = pci_set_dma_mask(dev->bus->host_pci, mask);
 		if (err)
 			return err;
 		err = pci_set_consistent_dma_mask(dev->bus->host_pci, mask);
 		return err;
+#endif
 	case SSB_BUSTYPE_SSB:
 		return dma_set_mask(dev->dev, mask);
 	default:
@@ -1188,6 +1192,7 @@ void * ssb_dma_alloc_consistent(struct ssb_device *dev, size_t size,
 {
 	switch (dev->bus->bustype) {
 	case SSB_BUSTYPE_PCI:
+#ifdef CONFIG_SSB_PCIHOST
 		if (gfp_flags & GFP_DMA) {
 			/* Workaround: The PCI API does not support passing
 			 * a GFP flag. */
@@ -1195,6 +1200,7 @@ void * ssb_dma_alloc_consistent(struct ssb_device *dev, size_t size,
 						  size, dma_handle, gfp_flags);
 		}
 		return pci_alloc_consistent(dev->bus->host_pci, size, dma_handle);
+#endif
 	case SSB_BUSTYPE_SSB:
 		return dma_alloc_coherent(dev->dev, size, dma_handle, gfp_flags);
 	default:
@@ -1210,6 +1216,7 @@ void ssb_dma_free_consistent(struct ssb_device *dev, size_t size,
 {
 	switch (dev->bus->bustype) {
 	case SSB_BUSTYPE_PCI:
+#ifdef CONFIG_SSB_PCIHOST
 		if (gfp_flags & GFP_DMA) {
 			/* Workaround: The PCI API does not support passing
 			 * a GFP flag. */
@@ -1220,6 +1227,7 @@ void ssb_dma_free_consistent(struct ssb_device *dev, size_t size,
 		pci_free_consistent(dev->bus->host_pci, size,
 				    vaddr, dma_handle);
 		return;
+#endif
 	case SSB_BUSTYPE_SSB:
 		dma_free_coherent(dev->dev, size, vaddr, dma_handle);
 		return;
diff --git a/drivers/telephony/ixj.c b/drivers/telephony/ixj.c
index 49cd9793404f..ec7aeb502d15 100644
--- a/drivers/telephony/ixj.c
+++ b/drivers/telephony/ixj.c
@@ -6095,15 +6095,15 @@ static int capabilities_check(IXJ *j, struct phone_capability *pcreq)
 	return retval;
 }
 
-static int ixj_ioctl(struct inode *inode, struct file *file_p, unsigned int cmd, unsigned long arg)
+static long do_ixj_ioctl(struct file *file_p, unsigned int cmd, unsigned long arg)
 {
 	IXJ_TONE ti;
 	IXJ_FILTER jf;
 	IXJ_FILTER_RAW jfr;
 	void __user *argp = (void __user *)arg;
-
-	unsigned int raise, mant;
+	struct inode *inode = file_p->f_path.dentry->d_inode;
 	unsigned int minor = iminor(inode);
+	unsigned int raise, mant;
 	int board = NUM(inode);
 
 	IXJ *j = get_ixj(NUM(inode));
@@ -6661,6 +6661,15 @@ static int ixj_ioctl(struct inode *inode, struct file *file_p, unsigned int cmd,
 	return retval;
 }
 
+static long ixj_ioctl(struct file *file_p, unsigned int cmd, unsigned long arg)
+{
+	long ret;
+	lock_kernel();
+	ret = do_ixj_ioctl(file_p, cmd, arg);
+	unlock_kernel();
+	return ret;
+}
+
 static int ixj_fasync(int fd, struct file *file_p, int mode)
 {
 	IXJ *j = get_ixj(NUM(file_p->f_path.dentry->d_inode));
@@ -6674,7 +6683,7 @@ static const struct file_operations ixj_fops =
         .read           = ixj_enhanced_read,
         .write          = ixj_enhanced_write,
         .poll           = ixj_poll,
-        .ioctl          = ixj_ioctl,
+        .unlocked_ioctl = ixj_ioctl,
         .release        = ixj_release,
         .fasync         = ixj_fasync
 };
diff --git a/drivers/uio/Kconfig b/drivers/uio/Kconfig
index 2e9079df26b3..4190be64917f 100644
--- a/drivers/uio/Kconfig
+++ b/drivers/uio/Kconfig
@@ -33,6 +33,19 @@ config UIO_PDRV
 
 	  If you don't know what to do here, say N.
 
+config UIO_PDRV_GENIRQ
+	tristate "Userspace I/O platform driver with generic IRQ handling"
+	help
+	  Platform driver for Userspace I/O devices, including generic
+	  interrupt handling code. Shared interrupts are not supported.
+
+	  This kernel driver requires that the matching userspace driver
+	  handles interrupts in a special way. Userspace is responsible
+	  for acknowledging the hardware device if needed, and re-enabling
+	  interrupts in the interrupt controller using the write() syscall.
+
+	  If you don't know what to do here, say N.
+
 config UIO_SMX
 	tristate "SMX cryptengine UIO interface"
 	default n
diff --git a/drivers/uio/Makefile b/drivers/uio/Makefile
index e00ce0def1a0..8667bbdef904 100644
--- a/drivers/uio/Makefile
+++ b/drivers/uio/Makefile
@@ -1,4 +1,5 @@
 obj-$(CONFIG_UIO)	+= uio.o
 obj-$(CONFIG_UIO_CIF)	+= uio_cif.o
 obj-$(CONFIG_UIO_PDRV)	+= uio_pdrv.o
+obj-$(CONFIG_UIO_PDRV_GENIRQ)	+= uio_pdrv_genirq.o
 obj-$(CONFIG_UIO_SMX)	+= uio_smx.o
diff --git a/drivers/uio/uio_pdrv.c b/drivers/uio/uio_pdrv.c
index 5d0d2e85d982..0b4ef39cd85d 100644
--- a/drivers/uio/uio_pdrv.c
+++ b/drivers/uio/uio_pdrv.c
@@ -88,6 +88,8 @@ static int uio_pdrv_remove(struct platform_device *pdev)
 
 	uio_unregister_device(pdata->uioinfo);
 
+	kfree(pdata);
+
 	return 0;
 }
 
@@ -114,5 +116,5 @@ module_exit(uio_pdrv_exit);
 
 MODULE_AUTHOR("Uwe Kleine-Koenig");
 MODULE_DESCRIPTION("Userspace I/O platform driver");
-MODULE_LICENSE("GPL");
+MODULE_LICENSE("GPL v2");
 MODULE_ALIAS("platform:" DRIVER_NAME);
diff --git a/drivers/uio/uio_pdrv_genirq.c b/drivers/uio/uio_pdrv_genirq.c
new file mode 100644
index 000000000000..1f82c83a92ae
--- /dev/null
+++ b/drivers/uio/uio_pdrv_genirq.c
@@ -0,0 +1,188 @@
+/*
+ * drivers/uio/uio_pdrv_genirq.c
+ *
+ * Userspace I/O platform driver with generic IRQ handling code.
+ *
+ * Copyright (C) 2008 Magnus Damm
+ *
+ * Based on uio_pdrv.c by Uwe Kleine-Koenig,
+ * Copyright (C) 2008 by Digi International Inc.
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ */
+
+#include <linux/platform_device.h>
+#include <linux/uio_driver.h>
+#include <linux/spinlock.h>
+#include <linux/bitops.h>
+#include <linux/interrupt.h>
+#include <linux/stringify.h>
+
+#define DRIVER_NAME "uio_pdrv_genirq"
+
+struct uio_pdrv_genirq_platdata {
+	struct uio_info *uioinfo;
+	spinlock_t lock;
+	unsigned long flags;
+};
+
+static irqreturn_t uio_pdrv_genirq_handler(int irq, struct uio_info *dev_info)
+{
+	struct uio_pdrv_genirq_platdata *priv = dev_info->priv;
+
+	/* Just disable the interrupt in the interrupt controller, and
+	 * remember the state so we can allow user space to enable it later.
+	 */
+
+	if (!test_and_set_bit(0, &priv->flags))
+		disable_irq_nosync(irq);
+
+	return IRQ_HANDLED;
+}
+
+static int uio_pdrv_genirq_irqcontrol(struct uio_info *dev_info, s32 irq_on)
+{
+	struct uio_pdrv_genirq_platdata *priv = dev_info->priv;
+	unsigned long flags;
+
+	/* Allow user space to enable and disable the interrupt
+	 * in the interrupt controller, but keep track of the
+	 * state to prevent per-irq depth damage.
+	 *
+	 * Serialize this operation to support multiple tasks.
+	 */
+
+	spin_lock_irqsave(&priv->lock, flags);
+	if (irq_on) {
+		if (test_and_clear_bit(0, &priv->flags))
+			enable_irq(dev_info->irq);
+	} else {
+		if (!test_and_set_bit(0, &priv->flags))
+			disable_irq(dev_info->irq);
+	}
+	spin_unlock_irqrestore(&priv->lock, flags);
+
+	return 0;
+}
+
+static int uio_pdrv_genirq_probe(struct platform_device *pdev)
+{
+	struct uio_info *uioinfo = pdev->dev.platform_data;
+	struct uio_pdrv_genirq_platdata *priv;
+	struct uio_mem *uiomem;
+	int ret = -EINVAL;
+	int i;
+
+	if (!uioinfo || !uioinfo->name || !uioinfo->version) {
+		dev_err(&pdev->dev, "missing platform_data\n");
+		goto bad0;
+	}
+
+	if (uioinfo->handler || uioinfo->irqcontrol || uioinfo->irq_flags) {
+		dev_err(&pdev->dev, "interrupt configuration error\n");
+		goto bad0;
+	}
+
+	priv = kzalloc(sizeof(*priv), GFP_KERNEL);
+	if (!priv) {
+		ret = -ENOMEM;
+		dev_err(&pdev->dev, "unable to kmalloc\n");
+		goto bad0;
+	}
+
+	priv->uioinfo = uioinfo;
+	spin_lock_init(&priv->lock);
+	priv->flags = 0; /* interrupt is enabled to begin with */
+
+	uiomem = &uioinfo->mem[0];
+
+	for (i = 0; i < pdev->num_resources; ++i) {
+		struct resource *r = &pdev->resource[i];
+
+		if (r->flags != IORESOURCE_MEM)
+			continue;
+
+		if (uiomem >= &uioinfo->mem[MAX_UIO_MAPS]) {
+			dev_warn(&pdev->dev, "device has more than "
+					__stringify(MAX_UIO_MAPS)
+					" I/O memory resources.\n");
+			break;
+		}
+
+		uiomem->memtype = UIO_MEM_PHYS;
+		uiomem->addr = r->start;
+		uiomem->size = r->end - r->start + 1;
+		++uiomem;
+	}
+
+	while (uiomem < &uioinfo->mem[MAX_UIO_MAPS]) {
+		uiomem->size = 0;
+		++uiomem;
+	}
+
+	/* This driver requires no hardware specific kernel code to handle
+	 * interrupts. Instead, the interrupt handler simply disables the
+	 * interrupt in the interrupt controller. User space is responsible
+	 * for performing hardware specific acknowledge and re-enabling of
+	 * the interrupt in the interrupt controller.
+	 *
+	 * Interrupt sharing is not supported.
+	 */
+
+	uioinfo->irq_flags = IRQF_DISABLED;
+	uioinfo->handler = uio_pdrv_genirq_handler;
+	uioinfo->irqcontrol = uio_pdrv_genirq_irqcontrol;
+	uioinfo->priv = priv;
+
+	ret = uio_register_device(&pdev->dev, priv->uioinfo);
+	if (ret) {
+		dev_err(&pdev->dev, "unable to register uio device\n");
+		goto bad1;
+	}
+
+	platform_set_drvdata(pdev, priv);
+	return 0;
+ bad1:
+	kfree(priv);
+ bad0:
+	return ret;
+}
+
+static int uio_pdrv_genirq_remove(struct platform_device *pdev)
+{
+	struct uio_pdrv_genirq_platdata *priv = platform_get_drvdata(pdev);
+
+	uio_unregister_device(priv->uioinfo);
+	kfree(priv);
+	return 0;
+}
+
+static struct platform_driver uio_pdrv_genirq = {
+	.probe = uio_pdrv_genirq_probe,
+	.remove = uio_pdrv_genirq_remove,
+	.driver = {
+		.name = DRIVER_NAME,
+		.owner = THIS_MODULE,
+	},
+};
+
+static int __init uio_pdrv_genirq_init(void)
+{
+	return platform_driver_register(&uio_pdrv_genirq);
+}
+
+static void __exit uio_pdrv_genirq_exit(void)
+{
+	platform_driver_unregister(&uio_pdrv_genirq);
+}
+
+module_init(uio_pdrv_genirq_init);
+module_exit(uio_pdrv_genirq_exit);
+
+MODULE_AUTHOR("Magnus Damm");
+MODULE_DESCRIPTION("Userspace I/O platform driver with generic IRQ handling");
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("platform:" DRIVER_NAME);
diff --git a/drivers/usb/Kconfig b/drivers/usb/Kconfig
index 755823cdf62a..bcefbddeba50 100644
--- a/drivers/usb/Kconfig
+++ b/drivers/usb/Kconfig
@@ -95,16 +95,18 @@ config USB
 
 source "drivers/usb/core/Kconfig"
 
+source "drivers/usb/mon/Kconfig"
+
 source "drivers/usb/host/Kconfig"
 
+source "drivers/usb/musb/Kconfig"
+
 source "drivers/usb/class/Kconfig"
 
 source "drivers/usb/storage/Kconfig"
 
 source "drivers/usb/image/Kconfig"
 
-source "drivers/usb/mon/Kconfig"
-
 comment "USB port drivers"
 	depends on USB
 
diff --git a/drivers/usb/atm/cxacru.c b/drivers/usb/atm/cxacru.c
index 507a9bd0d77c..9aea43a8c4ad 100644
--- a/drivers/usb/atm/cxacru.c
+++ b/drivers/usb/atm/cxacru.c
@@ -602,7 +602,7 @@ static int cxacru_cm_get_array(struct cxacru_data *instance, enum cxacru_cm_requ
 			offd = le32_to_cpu(buf[offb++]);
 			if (offd >= size) {
 				if (printk_ratelimit())
-					usb_err(instance->usbatm, "wrong index #%x in response to cm #%x\n",
+					usb_err(instance->usbatm, "wrong index %#x in response to cm %#x\n",
 						offd, cm);
 				ret = -EIO;
 				goto cleanup;
diff --git a/drivers/usb/atm/ueagle-atm.c b/drivers/usb/atm/ueagle-atm.c
index cb01b5106efd..b6483dd98acc 100644
--- a/drivers/usb/atm/ueagle-atm.c
+++ b/drivers/usb/atm/ueagle-atm.c
@@ -64,7 +64,6 @@
 #include <linux/ctype.h>
 #include <linux/sched.h>
 #include <linux/kthread.h>
-#include <linux/version.h>
 #include <linux/mutex.h>
 #include <linux/freezer.h>
 
diff --git a/drivers/usb/class/cdc-acm.c b/drivers/usb/class/cdc-acm.c
index 0725b1871f23..c257453fa9de 100644
--- a/drivers/usb/class/cdc-acm.c
+++ b/drivers/usb/class/cdc-acm.c
@@ -51,6 +51,7 @@
  */
 
 #undef DEBUG
+#undef VERBOSE_DEBUG
 
 #include <linux/kernel.h>
 #include <linux/errno.h>
@@ -70,6 +71,9 @@
 
 #include "cdc-acm.h"
 
+
+#define ACM_CLOSE_TIMEOUT	15	/* seconds to let writes drain */
+
 /*
  * Version Information
  */
@@ -85,6 +89,12 @@ static DEFINE_MUTEX(open_mutex);
 
 #define ACM_READY(acm)	(acm && acm->dev && acm->used)
 
+#ifdef VERBOSE_DEBUG
+#define verbose	1
+#else
+#define verbose	0
+#endif
+
 /*
  * Functions for ACM control messages.
  */
@@ -136,19 +146,17 @@ static int acm_wb_alloc(struct acm *acm)
 static int acm_wb_is_avail(struct acm *acm)
 {
 	int i, n;
+	unsigned long flags;
 
 	n = ACM_NW;
+	spin_lock_irqsave(&acm->write_lock, flags);
 	for (i = 0; i < ACM_NW; i++) {
 		n -= acm->wb[i].use;
 	}
+	spin_unlock_irqrestore(&acm->write_lock, flags);
 	return n;
 }
 
-static inline int acm_wb_is_used(struct acm *acm, int wbn)
-{
-	return acm->wb[wbn].use;
-}
-
 /*
  * Finish write.
  */
@@ -157,7 +165,6 @@ static void acm_write_done(struct acm *acm, struct acm_wb *wb)
 	unsigned long flags;
 
 	spin_lock_irqsave(&acm->write_lock, flags);
-	acm->write_ready = 1;
 	wb->use = 0;
 	acm->transmitting--;
 	spin_unlock_irqrestore(&acm->write_lock, flags);
@@ -190,40 +197,25 @@ static int acm_start_wb(struct acm *acm, struct acm_wb *wb)
 static int acm_write_start(struct acm *acm, int wbn)
 {
 	unsigned long flags;
-	struct acm_wb *wb;
+	struct acm_wb *wb = &acm->wb[wbn];
 	int rc;
 
 	spin_lock_irqsave(&acm->write_lock, flags);
 	if (!acm->dev) {
+		wb->use = 0;
 		spin_unlock_irqrestore(&acm->write_lock, flags);
 		return -ENODEV;
 	}
 
-	if (!acm->write_ready) {
-		spin_unlock_irqrestore(&acm->write_lock, flags);
-		return 0;	/* A white lie */
-	}
-
-	wb = &acm->wb[wbn];
-	if(acm_wb_is_avail(acm) <= 1)
-		acm->write_ready = 0;
-
 	dbg("%s susp_count: %d", __func__, acm->susp_count);
 	if (acm->susp_count) {
-		acm->old_ready = acm->write_ready;
 		acm->delayed_wb = wb;
-		acm->write_ready = 0;
 		schedule_work(&acm->waker);
 		spin_unlock_irqrestore(&acm->write_lock, flags);
 		return 0;	/* A white lie */
 	}
 	usb_mark_last_busy(acm->dev);
 
-	if (!acm_wb_is_used(acm, wbn)) {
-		spin_unlock_irqrestore(&acm->write_lock, flags);
-		return 0;
-	}
-
 	rc = acm_start_wb(acm, wb);
 	spin_unlock_irqrestore(&acm->write_lock, flags);
 
@@ -488,22 +480,28 @@ urbs:
 /* data interface wrote those outgoing bytes */
 static void acm_write_bulk(struct urb *urb)
 {
-	struct acm *acm;
 	struct acm_wb *wb = urb->context;
+	struct acm *acm = wb->instance;
 
-	dbg("Entering acm_write_bulk with status %d", urb->status);
+	if (verbose || urb->status
+			|| (urb->actual_length != urb->transfer_buffer_length))
+		dev_dbg(&acm->data->dev, "tx %d/%d bytes -- > %d\n",
+			urb->actual_length,
+			urb->transfer_buffer_length,
+			urb->status);
 
-	acm = wb->instance;
 	acm_write_done(acm, wb);
 	if (ACM_READY(acm))
 		schedule_work(&acm->work);
+	else
+		wake_up_interruptible(&acm->drain_wait);
 }
 
 static void acm_softint(struct work_struct *work)
 {
 	struct acm *acm = container_of(work, struct acm, work);
-	dbg("Entering acm_softint.");
-	
+
+	dev_vdbg(&acm->data->dev, "tx work\n");
 	if (!ACM_READY(acm))
 		return;
 	tty_wakeup(acm->tty);
@@ -512,7 +510,6 @@ static void acm_softint(struct work_struct *work)
 static void acm_waker(struct work_struct *waker)
 {
 	struct acm *acm = container_of(waker, struct acm, waker);
-	long flags;
 	int rv;
 
 	rv = usb_autopm_get_interface(acm->control);
@@ -524,9 +521,6 @@ static void acm_waker(struct work_struct *waker)
 		acm_start_wb(acm, acm->delayed_wb);
 		acm->delayed_wb = NULL;
 	}
-	spin_lock_irqsave(&acm->write_lock, flags);
-	acm->write_ready = acm->old_ready;
-	spin_unlock_irqrestore(&acm->write_lock, flags);
 	usb_autopm_put_interface(acm->control);
 }
 
@@ -595,8 +589,8 @@ static int acm_tty_open(struct tty_struct *tty, struct file *filp)
 	tasklet_schedule(&acm->urb_task);
 
 done:
-err_out:
 	mutex_unlock(&acm->mutex);
+err_out:
 	mutex_unlock(&open_mutex);
 	return rv;
 
@@ -628,6 +622,8 @@ static void acm_tty_unregister(struct acm *acm)
 	kfree(acm);
 }
 
+static int acm_tty_chars_in_buffer(struct tty_struct *tty);
+
 static void acm_tty_close(struct tty_struct *tty, struct file *filp)
 {
 	struct acm *acm = tty->driver_data;
@@ -642,6 +638,13 @@ static void acm_tty_close(struct tty_struct *tty, struct file *filp)
 		if (acm->dev) {
 			usb_autopm_get_interface(acm->control);
 			acm_set_control(acm, acm->ctrlout = 0);
+
+			/* try letting the last writes drain naturally */
+			wait_event_interruptible_timeout(acm->drain_wait,
+					(ACM_NW == acm_wb_is_avail(acm))
+						|| !acm->dev,
+					ACM_CLOSE_TIMEOUT * HZ);
+
 			usb_kill_urb(acm->ctrlurb);
 			for (i = 0; i < ACM_NW; i++)
 				usb_kill_urb(acm->wb[i].urb);
@@ -697,7 +700,7 @@ static int acm_tty_write_room(struct tty_struct *tty)
 	 * Do not let the line discipline to know that we have a reserve,
 	 * or it might get too enthusiastic.
 	 */
-	return (acm->write_ready && acm_wb_is_avail(acm)) ? acm->writesize : 0;
+	return acm_wb_is_avail(acm) ? acm->writesize : 0;
 }
 
 static int acm_tty_chars_in_buffer(struct tty_struct *tty)
@@ -1072,11 +1075,11 @@ skip_normal_probe:
 	acm->urb_task.data = (unsigned long) acm;
 	INIT_WORK(&acm->work, acm_softint);
 	INIT_WORK(&acm->waker, acm_waker);
+	init_waitqueue_head(&acm->drain_wait);
 	spin_lock_init(&acm->throttle_lock);
 	spin_lock_init(&acm->write_lock);
 	spin_lock_init(&acm->read_lock);
 	mutex_init(&acm->mutex);
-	acm->write_ready = 1;
 	acm->rx_endpoint = usb_rcvbulkpipe(usb_dev, epread->bEndpointAddress);
 
 	buf = usb_buffer_alloc(usb_dev, ctrlsize, GFP_KERNEL, &acm->ctrl_dma);
@@ -1108,9 +1111,11 @@ skip_normal_probe:
 		rcv->instance = acm;
 	}
 	for (i = 0; i < num_rx_buf; i++) {
-		struct acm_rb *buf = &(acm->rb[i]);
+		struct acm_rb *rb = &(acm->rb[i]);
 
-		if (!(buf->base = usb_buffer_alloc(acm->dev, readsize, GFP_KERNEL, &buf->dma))) {
+		rb->base = usb_buffer_alloc(acm->dev, readsize,
+				GFP_KERNEL, &rb->dma);
+		if (!rb->base) {
 			dev_dbg(&intf->dev, "out of memory (read bufs usb_buffer_alloc)\n");
 			goto alloc_fail7;
 		}
@@ -1172,6 +1177,7 @@ skip_countries:
 	acm_set_line(acm, &acm->line);
 
 	usb_driver_claim_interface(&acm_driver, data_interface, acm);
+	usb_set_intfdata(data_interface, acm);
 
 	usb_get_intf(control_interface);
 	tty_register_device(acm_tty_driver, minor, &control_interface->dev);
@@ -1221,11 +1227,11 @@ static void acm_disconnect(struct usb_interface *intf)
 	struct acm *acm = usb_get_intfdata(intf);
 	struct usb_device *usb_dev = interface_to_usbdev(intf);
 
-	mutex_lock(&open_mutex);
-	if (!acm || !acm->dev) {
-		mutex_unlock(&open_mutex);
+	/* sibling interface is already cleaning up */
+	if (!acm)
 		return;
-	}
+
+	mutex_lock(&open_mutex);
 	if (acm->country_codes){
 		device_remove_file(&acm->control->dev,
 				&dev_attr_wCountryCodes);
@@ -1356,6 +1362,9 @@ static struct usb_device_id acm_ids[] = {
 	{ USB_DEVICE(0x0803, 0x3095), /* Zoom Telephonics Model 3095F USB MODEM */
 	.driver_info = NO_UNION_NORMAL, /* has no union descriptor */
 	},
+	{ USB_DEVICE(0x0572, 0x1321), /* Conexant USB MODEM CX93010 */
+	.driver_info = NO_UNION_NORMAL, /* has no union descriptor */
+	},
 
 	/* control interfaces with various AT-command sets */
 	{ USB_INTERFACE_INFO(USB_CLASS_COMM, USB_CDC_SUBCLASS_ACM,
diff --git a/drivers/usb/class/cdc-acm.h b/drivers/usb/class/cdc-acm.h
index 85c3aaaab7c5..1f95e7aa1b66 100644
--- a/drivers/usb/class/cdc-acm.h
+++ b/drivers/usb/class/cdc-acm.h
@@ -106,8 +106,6 @@ struct acm {
 	struct list_head spare_read_bufs;
 	struct list_head filled_read_bufs;
 	int write_used;					/* number of non-empty write buffers */
-	int write_ready;				/* write urb is not running */
-	int old_ready;
 	int processing;
 	int transmitting;
 	spinlock_t write_lock;
@@ -115,6 +113,7 @@ struct acm {
 	struct usb_cdc_line_coding line;		/* bits, stop, parity */
 	struct work_struct work;			/* work queue entry for line discipline waking up */
 	struct work_struct waker;
+	wait_queue_head_t drain_wait;			/* close processing */
 	struct tasklet_struct urb_task;                 /* rx processing */
 	spinlock_t throttle_lock;			/* synchronize throtteling and read callback */
 	unsigned int ctrlin;				/* input control lines (DCD, DSR, RI, break, overruns) */
diff --git a/drivers/usb/core/driver.c b/drivers/usb/core/driver.c
index ddb54e14a5c5..5a7fa6f09958 100644
--- a/drivers/usb/core/driver.c
+++ b/drivers/usb/core/driver.c
@@ -230,6 +230,13 @@ static int usb_probe_interface(struct device *dev)
 		 */
 		intf->pm_usage_cnt = !(driver->supports_autosuspend);
 
+		/* Carry out a deferred switch to altsetting 0 */
+		if (intf->needs_altsetting0) {
+			usb_set_interface(udev, intf->altsetting[0].
+					desc.bInterfaceNumber, 0);
+			intf->needs_altsetting0 = 0;
+		}
+
 		error = driver->probe(intf, id);
 		if (error) {
 			mark_quiesced(intf);
@@ -266,8 +273,17 @@ static int usb_unbind_interface(struct device *dev)
 
 	driver->disconnect(intf);
 
-	/* reset other interface state */
-	usb_set_interface(udev, intf->altsetting[0].desc.bInterfaceNumber, 0);
+	/* Reset other interface state.
+	 * We cannot do a Set-Interface if the device is suspended or
+	 * if it is prepared for a system sleep (since installing a new
+	 * altsetting means creating new endpoint device entries).
+	 * When either of these happens, defer the Set-Interface.
+	 */
+	if (!error && intf->dev.power.status == DPM_ON)
+		usb_set_interface(udev, intf->altsetting[0].
+				desc.bInterfaceNumber, 0);
+	else
+		intf->needs_altsetting0 = 1;
 	usb_set_intfdata(intf, NULL);
 
 	intf->condition = USB_INTERFACE_UNBOUND;
@@ -774,7 +790,6 @@ void usb_deregister(struct usb_driver *driver)
 }
 EXPORT_SYMBOL_GPL(usb_deregister);
 
-
 /* Forced unbinding of a USB interface driver, either because
  * it doesn't support pre_reset/post_reset/reset_resume or
  * because it doesn't support suspend/resume.
@@ -799,7 +814,8 @@ void usb_forced_unbind_intf(struct usb_interface *intf)
  * The caller must hold @intf's device's lock, but not its pm_mutex
  * and not @intf->dev.sem.
  *
- * FIXME: The caller must block system sleep transitions.
+ * Note: Rebinds will be skipped if a system sleep transition is in
+ * progress and the PM "complete" callback hasn't occurred yet.
  */
 void usb_rebind_intf(struct usb_interface *intf)
 {
@@ -815,12 +831,16 @@ void usb_rebind_intf(struct usb_interface *intf)
 	}
 
 	/* Try to rebind the interface */
-	intf->needs_binding = 0;
-	rc = device_attach(&intf->dev);
-	if (rc < 0)
-		dev_warn(&intf->dev, "rebind failed: %d\n", rc);
+	if (intf->dev.power.status == DPM_ON) {
+		intf->needs_binding = 0;
+		rc = device_attach(&intf->dev);
+		if (rc < 0)
+			dev_warn(&intf->dev, "rebind failed: %d\n", rc);
+	}
 }
 
+#ifdef CONFIG_PM
+
 #define DO_UNBIND	0
 #define DO_REBIND	1
 
@@ -828,7 +848,6 @@ void usb_rebind_intf(struct usb_interface *intf)
  * or rebind interfaces that have been unbound, according to @action.
  *
  * The caller must hold @udev's device lock.
- * FIXME: For rebinds, the caller must block system sleep transitions.
  */
 static void do_unbind_rebind(struct usb_device *udev, int action)
 {
@@ -850,30 +869,14 @@ static void do_unbind_rebind(struct usb_device *udev, int action)
 				}
 				break;
 			case DO_REBIND:
-				if (intf->needs_binding) {
-
-	/* FIXME: The next line is needed because we are going to probe
-	 * the interface, but as far as the PM core is concerned the
-	 * interface is still suspended.  The problem wouldn't exist
-	 * if we could rebind the interface during the interface's own
-	 * resume() call, but at the time the usb_device isn't locked!
-	 *
-	 * The real solution will be to carry this out during the device's
-	 * complete() callback.  Until that is implemented, we have to
-	 * use this hack.
-	 */
-//					intf->dev.power.sleeping = 0;
-
+				if (intf->needs_binding)
 					usb_rebind_intf(intf);
-				}
 				break;
 			}
 		}
 	}
 }
 
-#ifdef CONFIG_PM
-
 /* Caller has locked udev's pm_mutex */
 static int usb_suspend_device(struct usb_device *udev, pm_message_t msg)
 {
@@ -927,14 +930,14 @@ static int usb_resume_device(struct usb_device *udev)
 }
 
 /* Caller has locked intf's usb_device's pm mutex */
-static int usb_suspend_interface(struct usb_interface *intf, pm_message_t msg)
+static int usb_suspend_interface(struct usb_device *udev,
+		struct usb_interface *intf, pm_message_t msg)
 {
 	struct usb_driver	*driver;
 	int			status = 0;
 
 	/* with no hardware, USB interfaces only use FREEZE and ON states */
-	if (interface_to_usbdev(intf)->state == USB_STATE_NOTATTACHED ||
-			!is_active(intf))
+	if (udev->state == USB_STATE_NOTATTACHED || !is_active(intf))
 		goto done;
 
 	if (intf->condition == USB_INTERFACE_UNBOUND)	/* This can't happen */
@@ -945,7 +948,7 @@ static int usb_suspend_interface(struct usb_interface *intf, pm_message_t msg)
 		status = driver->suspend(intf, msg);
 		if (status == 0)
 			mark_quiesced(intf);
-		else if (!interface_to_usbdev(intf)->auto_pm)
+		else if (!udev->auto_pm)
 			dev_err(&intf->dev, "%s error %d\n",
 					"suspend", status);
 	} else {
@@ -962,13 +965,13 @@ static int usb_suspend_interface(struct usb_interface *intf, pm_message_t msg)
 }
 
 /* Caller has locked intf's usb_device's pm_mutex */
-static int usb_resume_interface(struct usb_interface *intf, int reset_resume)
+static int usb_resume_interface(struct usb_device *udev,
+		struct usb_interface *intf, int reset_resume)
 {
 	struct usb_driver	*driver;
 	int			status = 0;
 
-	if (interface_to_usbdev(intf)->state == USB_STATE_NOTATTACHED ||
-			is_active(intf))
+	if (udev->state == USB_STATE_NOTATTACHED || is_active(intf))
 		goto done;
 
 	/* Don't let autoresume interfere with unbinding */
@@ -976,8 +979,17 @@ static int usb_resume_interface(struct usb_interface *intf, int reset_resume)
 		goto done;
 
 	/* Can't resume it if it doesn't have a driver. */
-	if (intf->condition == USB_INTERFACE_UNBOUND)
+	if (intf->condition == USB_INTERFACE_UNBOUND) {
+
+		/* Carry out a deferred switch to altsetting 0 */
+		if (intf->needs_altsetting0 &&
+				intf->dev.power.status == DPM_ON) {
+			usb_set_interface(udev, intf->altsetting[0].
+					desc.bInterfaceNumber, 0);
+			intf->needs_altsetting0 = 0;
+		}
 		goto done;
+	}
 
 	/* Don't resume if the interface is marked for rebinding */
 	if (intf->needs_binding)
@@ -1152,7 +1164,7 @@ static int usb_suspend_both(struct usb_device *udev, pm_message_t msg)
 	if (udev->actconfig) {
 		for (; i < udev->actconfig->desc.bNumInterfaces; i++) {
 			intf = udev->actconfig->interface[i];
-			status = usb_suspend_interface(intf, msg);
+			status = usb_suspend_interface(udev, intf, msg);
 			if (status != 0)
 				break;
 		}
@@ -1164,7 +1176,7 @@ static int usb_suspend_both(struct usb_device *udev, pm_message_t msg)
 	if (status != 0) {
 		while (--i >= 0) {
 			intf = udev->actconfig->interface[i];
-			usb_resume_interface(intf, 0);
+			usb_resume_interface(udev, intf, 0);
 		}
 
 		/* Try another autosuspend when the interfaces aren't busy */
@@ -1277,7 +1289,7 @@ static int usb_resume_both(struct usb_device *udev)
 	if (status == 0 && udev->actconfig) {
 		for (i = 0; i < udev->actconfig->desc.bNumInterfaces; i++) {
 			intf = udev->actconfig->interface[i];
-			usb_resume_interface(intf, udev->reset_resume);
+			usb_resume_interface(udev, intf, udev->reset_resume);
 		}
 	}
 
@@ -1606,12 +1618,10 @@ int usb_external_resume_device(struct usb_device *udev)
 	return status;
 }
 
-static int usb_suspend(struct device *dev, pm_message_t message)
+int usb_suspend(struct device *dev, pm_message_t message)
 {
 	struct usb_device	*udev;
 
-	if (!is_usb_device(dev))	/* Ignore PM for interfaces */
-		return 0;
 	udev = to_usb_device(dev);
 
 	/* If udev is already suspended, we can skip this suspend and
@@ -1630,12 +1640,10 @@ static int usb_suspend(struct device *dev, pm_message_t message)
 	return usb_external_suspend_device(udev, message);
 }
 
-static int usb_resume(struct device *dev)
+int usb_resume(struct device *dev)
 {
 	struct usb_device	*udev;
 
-	if (!is_usb_device(dev))	/* Ignore PM for interfaces */
-		return 0;
 	udev = to_usb_device(dev);
 
 	/* If udev->skip_sys_resume is set then udev was already suspended
@@ -1647,17 +1655,10 @@ static int usb_resume(struct device *dev)
 	return usb_external_resume_device(udev);
 }
 
-#else
-
-#define usb_suspend	NULL
-#define usb_resume	NULL
-
 #endif /* CONFIG_PM */
 
 struct bus_type usb_bus_type = {
 	.name =		"usb",
 	.match =	usb_device_match,
 	.uevent =	usb_uevent,
-	.suspend =	usb_suspend,
-	.resume =	usb_resume,
 };
diff --git a/drivers/usb/core/hcd.c b/drivers/usb/core/hcd.c
index f7bfd72ef115..8abd4e59bf4a 100644
--- a/drivers/usb/core/hcd.c
+++ b/drivers/usb/core/hcd.c
@@ -924,15 +924,6 @@ static int register_root_hub(struct usb_hcd *hcd)
 	return retval;
 }
 
-void usb_enable_root_hub_irq (struct usb_bus *bus)
-{
-	struct usb_hcd *hcd;
-
-	hcd = container_of (bus, struct usb_hcd, self);
-	if (hcd->driver->hub_irq_enable && hcd->state != HC_STATE_HALT)
-		hcd->driver->hub_irq_enable (hcd);
-}
-
 
 /*-------------------------------------------------------------------------*/
 
diff --git a/drivers/usb/core/hcd.h b/drivers/usb/core/hcd.h
index 5b0b59b0d89b..e710ce04e228 100644
--- a/drivers/usb/core/hcd.h
+++ b/drivers/usb/core/hcd.h
@@ -212,8 +212,6 @@ struct hc_driver {
 	int	(*bus_suspend)(struct usb_hcd *);
 	int	(*bus_resume)(struct usb_hcd *);
 	int	(*start_port_reset)(struct usb_hcd *, unsigned port_num);
-	void	(*hub_irq_enable)(struct usb_hcd *);
-		/* Needed only if port-change IRQs are level-triggered */
 
 		/* force handover of high-speed port to full-speed companion */
 	void	(*relinquish_port)(struct usb_hcd *, int);
@@ -379,8 +377,6 @@ extern struct list_head usb_bus_list;
 extern struct mutex usb_bus_list_lock;
 extern wait_queue_head_t usb_kill_urb_queue;
 
-extern void usb_enable_root_hub_irq(struct usb_bus *bus);
-
 extern int usb_find_interface_driver(struct usb_device *dev,
 	struct usb_interface *interface);
 
diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c
index 107e1d25ddec..6a5cb018383d 100644
--- a/drivers/usb/core/hub.c
+++ b/drivers/usb/core/hub.c
@@ -2102,8 +2102,6 @@ int usb_port_resume(struct usb_device *udev)
 	}
 
 	clear_bit(port1, hub->busy_bits);
-	if (!hub->hdev->parent && !hub->busy_bits[0])
-		usb_enable_root_hub_irq(hub->hdev->bus);
 
 	status = check_port_resume_type(udev,
 			hub, port1, status, portchange, portstatus);
@@ -3081,11 +3079,6 @@ static void hub_events(void)
 			}
 		}
 
-		/* If this is a root hub, tell the HCD it's okay to
-		 * re-enable port-change interrupts now. */
-		if (!hdev->parent && !hub->busy_bits[0])
-			usb_enable_root_hub_irq(hdev->bus);
-
 loop_autopm:
 		/* Allow autosuspend if we're not going to run again */
 		if (list_empty(&hub->event_list))
@@ -3311,8 +3304,6 @@ static int usb_reset_and_verify_device(struct usb_device *udev)
 			break;
 	}
 	clear_bit(port1, parent_hub->busy_bits);
-	if (!parent_hdev->parent && !parent_hub->busy_bits[0])
-		usb_enable_root_hub_irq(parent_hdev->bus);
 
 	if (ret < 0)
 		goto re_enumerate;
diff --git a/drivers/usb/core/message.c b/drivers/usb/core/message.c
index 2fcc06eb5e60..286b4431a097 100644
--- a/drivers/usb/core/message.c
+++ b/drivers/usb/core/message.c
@@ -389,7 +389,6 @@ int usb_sg_init(struct usb_sg_request *io, struct usb_device *dev,
 	if (io->entries <= 0)
 		return io->entries;
 
-	io->count = io->entries;
 	io->urbs = kmalloc(io->entries * sizeof *io->urbs, mem_flags);
 	if (!io->urbs)
 		goto nomem;
@@ -458,6 +457,7 @@ int usb_sg_init(struct usb_sg_request *io, struct usb_device *dev,
 	io->urbs[--i]->transfer_flags &= ~URB_NO_INTERRUPT;
 
 	/* transaction state */
+	io->count = io->entries;
 	io->status = 0;
 	io->bytes = 0;
 	init_completion(&io->complete);
@@ -1091,8 +1091,8 @@ void usb_disable_device(struct usb_device *dev, int skip_ep0)
 				continue;
 			dev_dbg(&dev->dev, "unregistering interface %s\n",
 				dev_name(&interface->dev));
-			device_del(&interface->dev);
 			usb_remove_sysfs_intf_files(interface);
+			device_del(&interface->dev);
 		}
 
 		/* Now that the interfaces are unbound, nobody should
diff --git a/drivers/usb/core/urb.c b/drivers/usb/core/urb.c
index c0b1ae25ae2a..47111e88f791 100644
--- a/drivers/usb/core/urb.c
+++ b/drivers/usb/core/urb.c
@@ -601,15 +601,20 @@ EXPORT_SYMBOL_GPL(usb_kill_anchored_urbs);
 void usb_unlink_anchored_urbs(struct usb_anchor *anchor)
 {
 	struct urb *victim;
+	unsigned long flags;
 
-	spin_lock_irq(&anchor->lock);
+	spin_lock_irqsave(&anchor->lock, flags);
 	while (!list_empty(&anchor->urb_list)) {
 		victim = list_entry(anchor->urb_list.prev, struct urb,
 				    anchor_list);
+		usb_get_urb(victim);
+		spin_unlock_irqrestore(&anchor->lock, flags);
 		/* this will unanchor the URB */
 		usb_unlink_urb(victim);
+		usb_put_urb(victim);
+		spin_lock_irqsave(&anchor->lock, flags);
 	}
-	spin_unlock_irq(&anchor->lock);
+	spin_unlock_irqrestore(&anchor->lock, flags);
 }
 EXPORT_SYMBOL_GPL(usb_unlink_anchored_urbs);
 
diff --git a/drivers/usb/core/usb.c b/drivers/usb/core/usb.c
index 84fcaa6a21ec..be1fa0723f2c 100644
--- a/drivers/usb/core/usb.c
+++ b/drivers/usb/core/usb.c
@@ -219,12 +219,6 @@ static int usb_dev_uevent(struct device *dev, struct kobj_uevent_env *env)
 }
 #endif	/* CONFIG_HOTPLUG */
 
-struct device_type usb_device_type = {
-	.name =		"usb_device",
-	.release =	usb_release_dev,
-	.uevent =	usb_dev_uevent,
-};
-
 #ifdef	CONFIG_PM
 
 static int ksuspend_usb_init(void)
@@ -244,13 +238,80 @@ static void ksuspend_usb_cleanup(void)
 	destroy_workqueue(ksuspend_usb_wq);
 }
 
+/* USB device Power-Management thunks.
+ * There's no need to distinguish here between quiescing a USB device
+ * and powering it down; the generic_suspend() routine takes care of
+ * it by skipping the usb_port_suspend() call for a quiesce.  And for
+ * USB interfaces there's no difference at all.
+ */
+
+static int usb_dev_prepare(struct device *dev)
+{
+	return 0;		/* Implement eventually? */
+}
+
+static void usb_dev_complete(struct device *dev)
+{
+	/* Currently used only for rebinding interfaces */
+	usb_resume(dev);	/* Implement eventually? */
+}
+
+static int usb_dev_suspend(struct device *dev)
+{
+	return usb_suspend(dev, PMSG_SUSPEND);
+}
+
+static int usb_dev_resume(struct device *dev)
+{
+	return usb_resume(dev);
+}
+
+static int usb_dev_freeze(struct device *dev)
+{
+	return usb_suspend(dev, PMSG_FREEZE);
+}
+
+static int usb_dev_thaw(struct device *dev)
+{
+	return usb_resume(dev);
+}
+
+static int usb_dev_poweroff(struct device *dev)
+{
+	return usb_suspend(dev, PMSG_HIBERNATE);
+}
+
+static int usb_dev_restore(struct device *dev)
+{
+	return usb_resume(dev);
+}
+
+static struct pm_ops usb_device_pm_ops = {
+	.prepare =	usb_dev_prepare,
+	.complete =	usb_dev_complete,
+	.suspend =	usb_dev_suspend,
+	.resume =	usb_dev_resume,
+	.freeze =	usb_dev_freeze,
+	.thaw =		usb_dev_thaw,
+	.poweroff =	usb_dev_poweroff,
+	.restore =	usb_dev_restore,
+};
+
 #else
 
 #define ksuspend_usb_init()	0
 #define ksuspend_usb_cleanup()	do {} while (0)
+#define usb_device_pm_ops	(*(struct pm_ops *)0)
 
 #endif	/* CONFIG_PM */
 
+struct device_type usb_device_type = {
+	.name =		"usb_device",
+	.release =	usb_release_dev,
+	.uevent =	usb_dev_uevent,
+	.pm =		&usb_device_pm_ops,
+};
+
 
 /* Returns 1 if @usb_bus is WUSB, 0 otherwise */
 static unsigned usb_bus_is_wusb(struct usb_bus *bus)
diff --git a/drivers/usb/core/usb.h b/drivers/usb/core/usb.h
index d9a6e16dbf84..9a1a45ac3add 100644
--- a/drivers/usb/core/usb.h
+++ b/drivers/usb/core/usb.h
@@ -41,6 +41,9 @@ extern void usb_host_cleanup(void);
 
 #ifdef	CONFIG_PM
 
+extern int usb_suspend(struct device *dev, pm_message_t msg);
+extern int usb_resume(struct device *dev);
+
 extern void usb_autosuspend_work(struct work_struct *work);
 extern int usb_port_suspend(struct usb_device *dev);
 extern int usb_port_resume(struct usb_device *dev);
diff --git a/drivers/usb/gadget/Kconfig b/drivers/usb/gadget/Kconfig
index c6a8c6b1116a..acc95b2ac6f8 100644
--- a/drivers/usb/gadget/Kconfig
+++ b/drivers/usb/gadget/Kconfig
@@ -284,6 +284,16 @@ config USB_LH7A40X
 	default USB_GADGET
 	select USB_GADGET_SELECTED
 
+# built in ../musb along with host support
+config USB_GADGET_MUSB_HDRC
+	boolean "Inventra HDRC USB Peripheral (TI, ...)"
+	depends on USB_MUSB_HDRC && (USB_MUSB_PERIPHERAL || USB_MUSB_OTG)
+	select USB_GADGET_DUALSPEED
+	select USB_GADGET_SELECTED
+	help
+	  This OTG-capable silicon IP is used in dual designs including
+	  the TI DaVinci, OMAP 243x, OMAP 343x, and TUSB 6010.
+
 config USB_GADGET_OMAP
 	boolean "OMAP USB Device Controller"
 	depends on ARCH_OMAP
diff --git a/drivers/usb/gadget/amd5536udc.c b/drivers/usb/gadget/amd5536udc.c
index 1500e1b3c302..abf8192f89e8 100644
--- a/drivers/usb/gadget/amd5536udc.c
+++ b/drivers/usb/gadget/amd5536udc.c
@@ -44,7 +44,6 @@
 #include <linux/module.h>
 #include <linux/pci.h>
 #include <linux/kernel.h>
-#include <linux/version.h>
 #include <linux/delay.h>
 #include <linux/ioport.h>
 #include <linux/sched.h>
diff --git a/drivers/usb/gadget/at91_udc.c b/drivers/usb/gadget/at91_udc.c
index e2d8a5d86c40..a8a1de413321 100644
--- a/drivers/usb/gadget/at91_udc.c
+++ b/drivers/usb/gadget/at91_udc.c
@@ -40,16 +40,15 @@
 #include <linux/usb/gadget.h>
 
 #include <asm/byteorder.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 #include <asm/irq.h>
 #include <asm/system.h>
-#include <asm/mach-types.h>
 #include <asm/gpio.h>
 
-#include <asm/arch/board.h>
-#include <asm/arch/cpu.h>
-#include <asm/arch/at91sam9261_matrix.h>
+#include <mach/board.h>
+#include <mach/cpu.h>
+#include <mach/at91sam9261_matrix.h>
 
 #include "at91_udc.h"
 
diff --git a/drivers/usb/gadget/at91_udc.h b/drivers/usb/gadget/at91_udc.h
index a973f2a50fb9..c65d62295890 100644
--- a/drivers/usb/gadget/at91_udc.h
+++ b/drivers/usb/gadget/at91_udc.h
@@ -171,7 +171,7 @@ struct at91_request {
 #endif
 
 #define ERR(stuff...)		pr_err("udc: " stuff)
-#define WARN(stuff...)		pr_warning("udc: " stuff)
+#define WARNING(stuff...)	pr_warning("udc: " stuff)
 #define INFO(stuff...)		pr_info("udc: " stuff)
 #define DBG(stuff...)		pr_debug("udc: " stuff)
 
diff --git a/drivers/usb/gadget/atmel_usba_udc.c b/drivers/usb/gadget/atmel_usba_udc.c
index 07e5a0b5dcda..ae30ab1d264f 100644
--- a/drivers/usb/gadget/atmel_usba_udc.c
+++ b/drivers/usb/gadget/atmel_usba_udc.c
@@ -22,7 +22,7 @@
 #include <linux/delay.h>
 
 #include <asm/gpio.h>
-#include <asm/arch/board.h>
+#include <mach/board.h>
 
 #include "atmel_usba_udc.h"
 
@@ -334,7 +334,7 @@ static void toggle_bias(int is_on)
 
 #elif defined(CONFIG_ARCH_AT91)
 
-#include <asm/arch/at91_pmc.h>
+#include <mach/at91_pmc.h>
 
 static void toggle_bias(int is_on)
 {
diff --git a/drivers/usb/gadget/cdc2.c b/drivers/usb/gadget/cdc2.c
index d490d0289507..a39a4b940c33 100644
--- a/drivers/usb/gadget/cdc2.c
+++ b/drivers/usb/gadget/cdc2.c
@@ -170,7 +170,7 @@ static int __init cdc_bind(struct usb_composite_dev *cdev)
 		 * but if the controller isn't recognized at all then
 		 * that assumption is a bit more likely to be wrong.
 		 */
-		WARN(cdev, "controller '%s' not recognized; trying %s\n",
+		WARNING(cdev, "controller '%s' not recognized; trying %s\n",
 				gadget->name,
 				cdc_config_driver.label);
 		device_desc.bcdDevice =
diff --git a/drivers/usb/gadget/dummy_hcd.c b/drivers/usb/gadget/dummy_hcd.c
index 21d1406af9ee..7600a0c78753 100644
--- a/drivers/usb/gadget/dummy_hcd.c
+++ b/drivers/usb/gadget/dummy_hcd.c
@@ -542,13 +542,14 @@ dummy_queue (struct usb_ep *_ep, struct usb_request *_req,
 		req->req.context = dum;
 		req->req.complete = fifo_complete;
 
+		list_add_tail(&req->queue, &ep->queue);
 		spin_unlock (&dum->lock);
 		_req->actual = _req->length;
 		_req->status = 0;
 		_req->complete (_ep, _req);
 		spin_lock (&dum->lock);
-	}
-	list_add_tail (&req->queue, &ep->queue);
+	}  else
+		list_add_tail(&req->queue, &ep->queue);
 	spin_unlock_irqrestore (&dum->lock, flags);
 
 	/* real hardware would likely enable transfers here, in case
diff --git a/drivers/usb/gadget/ether.c b/drivers/usb/gadget/ether.c
index d7aaaa29b1e1..bcac2e68660d 100644
--- a/drivers/usb/gadget/ether.c
+++ b/drivers/usb/gadget/ether.c
@@ -293,7 +293,7 @@ static int __init eth_bind(struct usb_composite_dev *cdev)
 		 * but if the controller isn't recognized at all then
 		 * that assumption is a bit more likely to be wrong.
 		 */
-		WARN(cdev, "controller '%s' not recognized; trying %s\n",
+		WARNING(cdev, "controller '%s' not recognized; trying %s\n",
 				gadget->name,
 				eth_config_driver.label);
 		device_desc.bcdDevice =
diff --git a/drivers/usb/gadget/f_acm.c b/drivers/usb/gadget/f_acm.c
index d8faccf27895..5ee1590b8e9c 100644
--- a/drivers/usb/gadget/f_acm.c
+++ b/drivers/usb/gadget/f_acm.c
@@ -47,18 +47,37 @@ struct f_acm {
 	u8				ctrl_id, data_id;
 	u8				port_num;
 
-	struct usb_descriptor_header	**fs_function;
+	u8				pending;
+
+	/* lock is mostly for pending and notify_req ... they get accessed
+	 * by callbacks both from tty (open/close/break) under its spinlock,
+	 * and notify_req.complete() which can't use that lock.
+	 */
+	spinlock_t			lock;
+
 	struct acm_ep_descs		fs;
-	struct usb_descriptor_header	**hs_function;
 	struct acm_ep_descs		hs;
 
 	struct usb_ep			*notify;
 	struct usb_endpoint_descriptor	*notify_desc;
+	struct usb_request		*notify_req;
 
 	struct usb_cdc_line_coding	port_line_coding;	/* 8-N-1 etc */
+
+	/* SetControlLineState request -- CDC 1.1 section 6.2.14 (INPUT) */
 	u16				port_handshake_bits;
-#define RS232_RTS	(1 << 1)	/* unused with full duplex */
-#define RS232_DTR	(1 << 0)	/* host is ready for data r/w */
+#define ACM_CTRL_RTS	(1 << 1)	/* unused with full duplex */
+#define ACM_CTRL_DTR	(1 << 0)	/* host is ready for data r/w */
+
+	/* SerialState notification -- CDC 1.1 section 6.3.5 (OUTPUT) */
+	u16				serial_state;
+#define ACM_CTRL_OVERRUN	(1 << 6)
+#define ACM_CTRL_PARITY		(1 << 5)
+#define ACM_CTRL_FRAMING	(1 << 4)
+#define ACM_CTRL_RI		(1 << 3)
+#define ACM_CTRL_BRK		(1 << 2)
+#define ACM_CTRL_DSR		(1 << 1)
+#define ACM_CTRL_DCD		(1 << 0)
 };
 
 static inline struct f_acm *func_to_acm(struct usb_function *f)
@@ -66,12 +85,17 @@ static inline struct f_acm *func_to_acm(struct usb_function *f)
 	return container_of(f, struct f_acm, port.func);
 }
 
+static inline struct f_acm *port_to_acm(struct gserial *p)
+{
+	return container_of(p, struct f_acm, port);
+}
+
 /*-------------------------------------------------------------------------*/
 
 /* notification endpoint uses smallish and infrequent fixed-size messages */
 
 #define GS_LOG2_NOTIFY_INTERVAL		5	/* 1 << 5 == 32 msec */
-#define GS_NOTIFY_MAXPACKET		8
+#define GS_NOTIFY_MAXPACKET		10	/* notification + 2 bytes */
 
 /* interface and class descriptors: */
 
@@ -117,7 +141,7 @@ static struct usb_cdc_acm_descriptor acm_descriptor __initdata = {
 	.bLength =		sizeof(acm_descriptor),
 	.bDescriptorType =	USB_DT_CS_INTERFACE,
 	.bDescriptorSubType =	USB_CDC_ACM_TYPE,
-	.bmCapabilities =	(1 << 1),
+	.bmCapabilities =	USB_CDC_CAP_LINE,
 };
 
 static struct usb_cdc_union_desc acm_union_desc __initdata = {
@@ -277,6 +301,11 @@ static int acm_setup(struct usb_function *f, const struct usb_ctrlrequest *ctrl)
 
 	/* composite driver infrastructure handles everything except
 	 * CDC class messages; interface activation uses set_alt().
+	 *
+	 * Note CDC spec table 4 lists the ACM request profile.  It requires
+	 * encapsulated command support ... we don't handle any, and respond
+	 * to them by stalling.  Options include get/set/clear comm features
+	 * (not that useful) and SEND_BREAK.
 	 */
 	switch ((ctrl->bRequestType << 8) | ctrl->bRequest) {
 
@@ -312,7 +341,7 @@ static int acm_setup(struct usb_function *f, const struct usb_ctrlrequest *ctrl)
 		value = 0;
 
 		/* FIXME we should not allow data to flow until the
-		 * host sets the RS232_DTR bit; and when it clears
+		 * host sets the ACM_CTRL_DTR bit; and when it clears
 		 * that bit, we should return to that no-flow state.
 		 */
 		acm->port_handshake_bits = w_value;
@@ -350,9 +379,6 @@ static int acm_set_alt(struct usb_function *f, unsigned intf, unsigned alt)
 	/* we know alt == 0, so this is an activation or a reset */
 
 	if (intf == acm->ctrl_id) {
-		/* REVISIT this may need more work when we start to
-		 * send notifications ...
-		 */
 		if (acm->notify->driver_data) {
 			VDBG(cdev, "reset acm control interface %d\n", intf);
 			usb_ep_disable(acm->notify);
@@ -397,6 +423,128 @@ static void acm_disable(struct usb_function *f)
 
 /*-------------------------------------------------------------------------*/
 
+/**
+ * acm_cdc_notify - issue CDC notification to host
+ * @acm: wraps host to be notified
+ * @type: notification type
+ * @value: Refer to cdc specs, wValue field.
+ * @data: data to be sent
+ * @length: size of data
+ * Context: irqs blocked, acm->lock held, acm_notify_req non-null
+ *
+ * Returns zero on sucess or a negative errno.
+ *
+ * See section 6.3.5 of the CDC 1.1 specification for information
+ * about the only notification we issue:  SerialState change.
+ */
+static int acm_cdc_notify(struct f_acm *acm, u8 type, u16 value,
+		void *data, unsigned length)
+{
+	struct usb_ep			*ep = acm->notify;
+	struct usb_request		*req;
+	struct usb_cdc_notification	*notify;
+	const unsigned			len = sizeof(*notify) + length;
+	void				*buf;
+	int				status;
+
+	req = acm->notify_req;
+	acm->notify_req = NULL;
+	acm->pending = false;
+
+	req->length = len;
+	notify = req->buf;
+	buf = notify + 1;
+
+	notify->bmRequestType = USB_DIR_IN | USB_TYPE_CLASS
+			| USB_RECIP_INTERFACE;
+	notify->bNotificationType = type;
+	notify->wValue = cpu_to_le16(value);
+	notify->wIndex = cpu_to_le16(acm->ctrl_id);
+	notify->wLength = cpu_to_le16(length);
+	memcpy(buf, data, length);
+
+	status = usb_ep_queue(ep, req, GFP_ATOMIC);
+	if (status < 0) {
+		ERROR(acm->port.func.config->cdev,
+				"acm ttyGS%d can't notify serial state, %d\n",
+				acm->port_num, status);
+		acm->notify_req = req;
+	}
+
+	return status;
+}
+
+static int acm_notify_serial_state(struct f_acm *acm)
+{
+	struct usb_composite_dev *cdev = acm->port.func.config->cdev;
+	int			status;
+
+	spin_lock(&acm->lock);
+	if (acm->notify_req) {
+		DBG(cdev, "acm ttyGS%d serial state %04x\n",
+				acm->port_num, acm->serial_state);
+		status = acm_cdc_notify(acm, USB_CDC_NOTIFY_SERIAL_STATE,
+				0, &acm->serial_state, sizeof(acm->serial_state));
+	} else {
+		acm->pending = true;
+		status = 0;
+	}
+	spin_unlock(&acm->lock);
+	return status;
+}
+
+static void acm_cdc_notify_complete(struct usb_ep *ep, struct usb_request *req)
+{
+	struct f_acm		*acm = req->context;
+	u8			doit = false;
+
+	/* on this call path we do NOT hold the port spinlock,
+	 * which is why ACM needs its own spinlock
+	 */
+	spin_lock(&acm->lock);
+	if (req->status != -ESHUTDOWN)
+		doit = acm->pending;
+	acm->notify_req = req;
+	spin_unlock(&acm->lock);
+
+	if (doit)
+		acm_notify_serial_state(acm);
+}
+
+/* connect == the TTY link is open */
+
+static void acm_connect(struct gserial *port)
+{
+	struct f_acm		*acm = port_to_acm(port);
+
+	acm->serial_state |= ACM_CTRL_DSR | ACM_CTRL_DCD;
+	acm_notify_serial_state(acm);
+}
+
+static void acm_disconnect(struct gserial *port)
+{
+	struct f_acm		*acm = port_to_acm(port);
+
+	acm->serial_state &= ~(ACM_CTRL_DSR | ACM_CTRL_DCD);
+	acm_notify_serial_state(acm);
+}
+
+static int acm_send_break(struct gserial *port, int duration)
+{
+	struct f_acm		*acm = port_to_acm(port);
+	u16			state;
+
+	state = acm->serial_state;
+	state &= ~ACM_CTRL_BRK;
+	if (duration)
+		state |= ACM_CTRL_BRK;
+
+	acm->serial_state = state;
+	return acm_notify_serial_state(acm);
+}
+
+/*-------------------------------------------------------------------------*/
+
 /* ACM function driver setup/binding */
 static int __init
 acm_bind(struct usb_configuration *c, struct usb_function *f)
@@ -445,8 +593,20 @@ acm_bind(struct usb_configuration *c, struct usb_function *f)
 	acm->notify = ep;
 	ep->driver_data = cdev;	/* claim */
 
+	/* allocate notification */
+	acm->notify_req = gs_alloc_req(ep,
+			sizeof(struct usb_cdc_notification) + 2,
+			GFP_KERNEL);
+	if (!acm->notify_req)
+		goto fail;
+
+	acm->notify_req->complete = acm_cdc_notify_complete;
+	acm->notify_req->context = acm;
+
 	/* copy descriptors, and track endpoint copies */
 	f->descriptors = usb_copy_descriptors(acm_fs_function);
+	if (!f->descriptors)
+		goto fail;
 
 	acm->fs.in = usb_find_endpoint(acm_fs_function,
 			f->descriptors, &acm_fs_in_desc);
@@ -478,8 +638,6 @@ acm_bind(struct usb_configuration *c, struct usb_function *f)
 				f->hs_descriptors, &acm_hs_notify_desc);
 	}
 
-	/* FIXME provide a callback for triggering notifications */
-
 	DBG(cdev, "acm ttyGS%d: %s speed IN/%s OUT/%s NOTIFY/%s\n",
 			acm->port_num,
 			gadget_is_dualspeed(c->cdev->gadget) ? "dual" : "full",
@@ -488,6 +646,9 @@ acm_bind(struct usb_configuration *c, struct usb_function *f)
 	return 0;
 
 fail:
+	if (acm->notify_req)
+		gs_free_req(acm->notify, acm->notify_req);
+
 	/* we might as well release our claims on endpoints */
 	if (acm->notify)
 		acm->notify->driver_data = NULL;
@@ -504,10 +665,13 @@ fail:
 static void
 acm_unbind(struct usb_configuration *c, struct usb_function *f)
 {
+	struct f_acm		*acm = func_to_acm(f);
+
 	if (gadget_is_dualspeed(c->cdev->gadget))
 		usb_free_descriptors(f->hs_descriptors);
 	usb_free_descriptors(f->descriptors);
-	kfree(func_to_acm(f));
+	gs_free_req(acm->notify, acm->notify_req);
+	kfree(acm);
 }
 
 /* Some controllers can't support CDC ACM ... */
@@ -571,8 +735,14 @@ int __init acm_bind_config(struct usb_configuration *c, u8 port_num)
 	if (!acm)
 		return -ENOMEM;
 
+	spin_lock_init(&acm->lock);
+
 	acm->port_num = port_num;
 
+	acm->port.connect = acm_connect;
+	acm->port.disconnect = acm_disconnect;
+	acm->port.send_break = acm_send_break;
+
 	acm->port.func.name = "acm";
 	acm->port.func.strings = acm_strings;
 	/* descriptors are per-instance copies */
diff --git a/drivers/usb/gadget/f_ecm.c b/drivers/usb/gadget/f_ecm.c
index 0822e9d7693a..a2b5c092bda0 100644
--- a/drivers/usb/gadget/f_ecm.c
+++ b/drivers/usb/gadget/f_ecm.c
@@ -63,9 +63,7 @@ struct f_ecm {
 
 	char				ethaddr[14];
 
-	struct usb_descriptor_header	**fs_function;
 	struct ecm_ep_descs		fs;
-	struct usb_descriptor_header	**hs_function;
 	struct ecm_ep_descs		hs;
 
 	struct usb_ep			*notify;
diff --git a/drivers/usb/gadget/f_rndis.c b/drivers/usb/gadget/f_rndis.c
index 61652f0f13fd..659b3d9671c4 100644
--- a/drivers/usb/gadget/f_rndis.c
+++ b/drivers/usb/gadget/f_rndis.c
@@ -85,9 +85,7 @@ struct f_rndis {
 	u8				ethaddr[ETH_ALEN];
 	int				config;
 
-	struct usb_descriptor_header	**fs_function;
 	struct rndis_ep_descs		fs;
-	struct usb_descriptor_header	**hs_function;
 	struct rndis_ep_descs		hs;
 
 	struct usb_ep			*notify;
diff --git a/drivers/usb/gadget/f_serial.c b/drivers/usb/gadget/f_serial.c
index 1b6bde9aaed5..fe5674db344b 100644
--- a/drivers/usb/gadget/f_serial.c
+++ b/drivers/usb/gadget/f_serial.c
@@ -36,9 +36,7 @@ struct f_gser {
 	u8				data_id;
 	u8				port_num;
 
-	struct usb_descriptor_header	**fs_function;
 	struct gser_descs		fs;
-	struct usb_descriptor_header	**hs_function;
 	struct gser_descs		hs;
 };
 
diff --git a/drivers/usb/gadget/f_subset.c b/drivers/usb/gadget/f_subset.c
index afeab9a0523f..acb8d233aa1d 100644
--- a/drivers/usb/gadget/f_subset.c
+++ b/drivers/usb/gadget/f_subset.c
@@ -66,9 +66,7 @@ struct f_gether {
 
 	char				ethaddr[14];
 
-	struct usb_descriptor_header	**fs_function;
 	struct geth_descs		fs;
-	struct usb_descriptor_header	**hs_function;
 	struct geth_descs		hs;
 };
 
diff --git a/drivers/usb/gadget/file_storage.c b/drivers/usb/gadget/file_storage.c
index 15c24edbb61a..ea2c31d18080 100644
--- a/drivers/usb/gadget/file_storage.c
+++ b/drivers/usb/gadget/file_storage.c
@@ -308,7 +308,7 @@ MODULE_LICENSE("Dual BSD/GPL");
 	dev_vdbg(&(d)->gadget->dev , fmt , ## args)
 #define ERROR(d, fmt, args...) \
 	dev_err(&(d)->gadget->dev , fmt , ## args)
-#define WARN(d, fmt, args...) \
+#define WARNING(d, fmt, args...) \
 	dev_warn(&(d)->gadget->dev , fmt , ## args)
 #define INFO(d, fmt, args...) \
 	dev_info(&(d)->gadget->dev , fmt , ## args)
@@ -1091,7 +1091,7 @@ static int ep0_queue(struct fsg_dev *fsg)
 	if (rc != 0 && rc != -ESHUTDOWN) {
 
 		/* We can't do much more than wait for a reset */
-		WARN(fsg, "error in submission: %s --> %d\n",
+		WARNING(fsg, "error in submission: %s --> %d\n",
 				fsg->ep0->name, rc);
 	}
 	return rc;
@@ -1227,7 +1227,7 @@ static void received_cbi_adsc(struct fsg_dev *fsg, struct fsg_buffhd *bh)
 
 	/* Save the command for later */
 	if (fsg->cbbuf_cmnd_size)
-		WARN(fsg, "CB[I] overwriting previous command\n");
+		WARNING(fsg, "CB[I] overwriting previous command\n");
 	fsg->cbbuf_cmnd_size = req->actual;
 	memcpy(fsg->cbbuf_cmnd, req->buf, fsg->cbbuf_cmnd_size);
 
@@ -1506,7 +1506,7 @@ static void start_transfer(struct fsg_dev *fsg, struct usb_ep *ep,
 		 * submissions if DMA is enabled. */
 		if (rc != -ESHUTDOWN && !(rc == -EOPNOTSUPP &&
 						req->length == 0))
-			WARN(fsg, "error in submission: %s --> %d\n",
+			WARNING(fsg, "error in submission: %s --> %d\n",
 					ep->name, rc);
 	}
 }
@@ -2294,7 +2294,7 @@ static int halt_bulk_in_endpoint(struct fsg_dev *fsg)
 		VDBG(fsg, "delayed bulk-in endpoint halt\n");
 	while (rc != 0) {
 		if (rc != -EAGAIN) {
-			WARN(fsg, "usb_ep_set_halt -> %d\n", rc);
+			WARNING(fsg, "usb_ep_set_halt -> %d\n", rc);
 			rc = 0;
 			break;
 		}
@@ -2317,7 +2317,7 @@ static int wedge_bulk_in_endpoint(struct fsg_dev *fsg)
 		VDBG(fsg, "delayed bulk-in endpoint wedge\n");
 	while (rc != 0) {
 		if (rc != -EAGAIN) {
-			WARN(fsg, "usb_ep_set_wedge -> %d\n", rc);
+			WARNING(fsg, "usb_ep_set_wedge -> %d\n", rc);
 			rc = 0;
 			break;
 		}
@@ -3755,7 +3755,7 @@ static int __init check_parameters(struct fsg_dev *fsg)
 		if (gcnum >= 0)
 			mod_data.release = 0x0300 + gcnum;
 		else {
-			WARN(fsg, "controller '%s' not recognized\n",
+			WARNING(fsg, "controller '%s' not recognized\n",
 				fsg->gadget->name);
 			mod_data.release = 0x0399;
 		}
diff --git a/drivers/usb/gadget/fsl_usb2_udc.c b/drivers/usb/gadget/fsl_usb2_udc.c
index 1695382f30fe..1cfccf102a2d 100644
--- a/drivers/usb/gadget/fsl_usb2_udc.c
+++ b/drivers/usb/gadget/fsl_usb2_udc.c
@@ -1538,7 +1538,7 @@ static void dtd_complete_irq(struct fsl_udc *udc)
 
 		/* If the ep is configured */
 		if (curr_ep->name == NULL) {
-			WARN("Invalid EP?");
+			WARNING("Invalid EP?");
 			continue;
 		}
 
diff --git a/drivers/usb/gadget/fsl_usb2_udc.h b/drivers/usb/gadget/fsl_usb2_udc.h
index 98b1483ef6a5..6131752a38bc 100644
--- a/drivers/usb/gadget/fsl_usb2_udc.h
+++ b/drivers/usb/gadget/fsl_usb2_udc.h
@@ -552,7 +552,7 @@ static void dump_msg(const char *label, const u8 * buf, unsigned int length)
 #endif
 
 #define ERR(stuff...)		pr_err("udc: " stuff)
-#define WARN(stuff...)		pr_warning("udc: " stuff)
+#define WARNING(stuff...)		pr_warning("udc: " stuff)
 #define INFO(stuff...)		pr_info("udc: " stuff)
 
 /*-------------------------------------------------------------------------*/
diff --git a/drivers/usb/gadget/gadget_chips.h b/drivers/usb/gadget/gadget_chips.h
index 5246e8fef2b2..17d9905101b7 100644
--- a/drivers/usb/gadget/gadget_chips.h
+++ b/drivers/usb/gadget/gadget_chips.h
@@ -11,6 +11,10 @@
  * Some are available on 2.4 kernels; several are available, but not
  * yet pushed in the 2.6 mainline tree.
  */
+
+#ifndef __GADGET_CHIPS_H
+#define __GADGET_CHIPS_H
+
 #ifdef CONFIG_USB_GADGET_NET2280
 #define	gadget_is_net2280(g)	!strcmp("net2280", (g)->name)
 #else
@@ -237,3 +241,5 @@ static inline bool gadget_supports_altsettings(struct usb_gadget *gadget)
 	/* Everything else is *presumably* fine ... */
 	return true;
 }
+
+#endif /* __GADGET_CHIPS_H */
diff --git a/drivers/usb/gadget/gmidi.c b/drivers/usb/gadget/gmidi.c
index 7f4d4828e3aa..ea8651e3da1a 100644
--- a/drivers/usb/gadget/gmidi.c
+++ b/drivers/usb/gadget/gmidi.c
@@ -138,8 +138,6 @@ static void gmidi_transmit(struct gmidi_device* dev, struct usb_request* req);
 	dev_vdbg(&(d)->gadget->dev , fmt , ## args)
 #define ERROR(d, fmt, args...) \
 	dev_err(&(d)->gadget->dev , fmt , ## args)
-#define WARN(d, fmt, args...) \
-	dev_warn(&(d)->gadget->dev , fmt , ## args)
 #define INFO(d, fmt, args...) \
 	dev_info(&(d)->gadget->dev , fmt , ## args)
 
diff --git a/drivers/usb/gadget/goku_udc.c b/drivers/usb/gadget/goku_udc.c
index 48f1c63b7013..60aa04847b18 100644
--- a/drivers/usb/gadget/goku_udc.c
+++ b/drivers/usb/gadget/goku_udc.c
@@ -1768,7 +1768,7 @@ static int goku_probe(struct pci_dev *pdev, const struct pci_device_id *id)
 	 * usb_gadget_driver_{register,unregister}() must change.
 	 */
 	if (the_controller) {
-		WARN(dev, "ignoring %s\n", pci_name(pdev));
+		WARNING(dev, "ignoring %s\n", pci_name(pdev));
 		return -EBUSY;
 	}
 	if (!pdev->irq) {
diff --git a/drivers/usb/gadget/goku_udc.h b/drivers/usb/gadget/goku_udc.h
index bc4eb1e0b507..566cb2319056 100644
--- a/drivers/usb/gadget/goku_udc.h
+++ b/drivers/usb/gadget/goku_udc.h
@@ -285,7 +285,7 @@ struct goku_udc {
 
 #define ERROR(dev,fmt,args...) \
 	xprintk(dev , KERN_ERR , fmt , ## args)
-#define WARN(dev,fmt,args...) \
+#define WARNING(dev,fmt,args...) \
 	xprintk(dev , KERN_WARNING , fmt , ## args)
 #define INFO(dev,fmt,args...) \
 	xprintk(dev , KERN_INFO , fmt , ## args)
diff --git a/drivers/usb/gadget/inode.c b/drivers/usb/gadget/inode.c
index 04692d59fc1c..f4585d3e90d7 100644
--- a/drivers/usb/gadget/inode.c
+++ b/drivers/usb/gadget/inode.c
@@ -262,8 +262,6 @@ static const char *CHIP;
 
 #define ERROR(dev,fmt,args...) \
 	xprintk(dev , KERN_ERR , fmt , ## args)
-#define WARN(dev,fmt,args...) \
-	xprintk(dev , KERN_WARNING , fmt , ## args)
 #define INFO(dev,fmt,args...) \
 	xprintk(dev , KERN_INFO , fmt , ## args)
 
diff --git a/drivers/usb/gadget/lh7a40x_udc.h b/drivers/usb/gadget/lh7a40x_udc.h
index 1ecfd6366b9a..ca861203a301 100644
--- a/drivers/usb/gadget/lh7a40x_udc.h
+++ b/drivers/usb/gadget/lh7a40x_udc.h
@@ -47,7 +47,7 @@
 #include <asm/irq.h>
 #include <asm/system.h>
 #include <asm/unaligned.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 
 #include <linux/usb/ch9.h>
 #include <linux/usb/gadget.h>
diff --git a/drivers/usb/gadget/m66592-udc.c b/drivers/usb/gadget/m66592-udc.c
index 8da7535c0c70..77b44fb48f0a 100644
--- a/drivers/usb/gadget/m66592-udc.c
+++ b/drivers/usb/gadget/m66592-udc.c
@@ -1593,7 +1593,7 @@ static int __init m66592_probe(struct platform_device *pdev)
 
 	m66592->gadget.ops = &m66592_gadget_ops;
 	device_initialize(&m66592->gadget.dev);
-	dev_set_name(&m66592->gadget, "gadget");
+	dev_set_name(&m66592->gadget.dev, "gadget");
 	m66592->gadget.is_dualspeed = 1;
 	m66592->gadget.dev.parent = &pdev->dev;
 	m66592->gadget.dev.dma_mask = pdev->dev.dma_mask;
diff --git a/drivers/usb/gadget/net2280.c b/drivers/usb/gadget/net2280.c
index b67ab677af72..5cfb5ebf3881 100644
--- a/drivers/usb/gadget/net2280.c
+++ b/drivers/usb/gadget/net2280.c
@@ -1007,7 +1007,7 @@ static void scan_dma_completions (struct net2280_ep *ep)
 			 * 0122, and 0124; not all cases trigger the warning.
 			 */
 			if ((tmp & (1 << NAK_OUT_PACKETS)) == 0) {
-				WARN (ep->dev, "%s lost packet sync!\n",
+				WARNING (ep->dev, "%s lost packet sync!\n",
 						ep->ep.name);
 				req->req.status = -EOVERFLOW;
 			} else if ((tmp = readl (&ep->regs->ep_avail)) != 0) {
diff --git a/drivers/usb/gadget/net2280.h b/drivers/usb/gadget/net2280.h
index 1f2af398a9a4..81a71dbdc2c6 100644
--- a/drivers/usb/gadget/net2280.h
+++ b/drivers/usb/gadget/net2280.h
@@ -272,7 +272,7 @@ static inline void net2280_led_shutdown (struct net2280 *dev)
 
 #define ERROR(dev,fmt,args...) \
 	xprintk(dev , KERN_ERR , fmt , ## args)
-#define WARN(dev,fmt,args...) \
+#define WARNING(dev,fmt,args...) \
 	xprintk(dev , KERN_WARNING , fmt , ## args)
 #define INFO(dev,fmt,args...) \
 	xprintk(dev , KERN_INFO , fmt , ## args)
diff --git a/drivers/usb/gadget/omap_udc.c b/drivers/usb/gadget/omap_udc.c
index 4b79a8509e84..574c53831a05 100644
--- a/drivers/usb/gadget/omap_udc.c
+++ b/drivers/usb/gadget/omap_udc.c
@@ -52,8 +52,9 @@
 #include <asm/unaligned.h>
 #include <asm/mach-types.h>
 
-#include <asm/arch/dma.h>
-#include <asm/arch/usb.h>
+#include <mach/dma.h>
+#include <mach/usb.h>
+#include <mach/control.h>
 
 #include "omap_udc.h"
 
@@ -1120,7 +1121,7 @@ static int omap_ep_set_halt(struct usb_ep *_ep, int value)
 			status = -EINVAL;
 		else if (value) {
 			if (ep->udc->ep0_set_config) {
-				WARN("error changing config?\n");
+				WARNING("error changing config?\n");
 				omap_writew(UDC_CLR_CFG, UDC_SYSCON2);
 			}
 			omap_writew(UDC_STALL_CMD, UDC_SYSCON2);
@@ -1764,7 +1765,7 @@ do_stall:
 					u.r.bRequestType, u.r.bRequest, status);
 			if (udc->ep0_set_config) {
 				if (udc->ep0_reset_config)
-					WARN("error resetting config?\n");
+					WARNING("error resetting config?\n");
 				else
 					omap_writew(UDC_CLR_CFG, UDC_SYSCON2);
 			}
@@ -2310,10 +2311,10 @@ static int proc_otg_show(struct seq_file *s)
 	u32		trans;
 	char		*ctrl_name;
 
-	tmp = OTG_REV_REG;
+	tmp = omap_readl(OTG_REV);
 	if (cpu_is_omap24xx()) {
 		ctrl_name = "control_devconf";
-		trans = CONTROL_DEVCONF_REG;
+		trans = omap_ctrl_readl(OMAP2_CONTROL_DEVCONF0);
 	} else {
 		ctrl_name = "tranceiver_ctrl";
 		trans = omap_readw(USB_TRANSCEIVER_CTRL);
@@ -3076,7 +3077,7 @@ static int omap_udc_suspend(struct platform_device *dev, pm_message_t message)
 	 * which would prevent entry to deep sleep...
 	 */
 	if ((devstat & UDC_ATT) != 0 && (devstat & UDC_SUS) == 0) {
-		WARN("session active; suspend requires disconnect\n");
+		WARNING("session active; suspend requires disconnect\n");
 		omap_pullup(&udc->gadget, 0);
 	}
 
diff --git a/drivers/usb/gadget/omap_udc.h b/drivers/usb/gadget/omap_udc.h
index 8522bbb12278..29edc51b6b22 100644
--- a/drivers/usb/gadget/omap_udc.h
+++ b/drivers/usb/gadget/omap_udc.h
@@ -188,7 +188,7 @@ struct omap_udc {
 #endif
 
 #define ERR(stuff...)		pr_err("udc: " stuff)
-#define WARN(stuff...)		pr_warning("udc: " stuff)
+#define WARNING(stuff...)	pr_warning("udc: " stuff)
 #define INFO(stuff...)		pr_info("udc: " stuff)
 #define DBG(stuff...)		pr_debug("udc: " stuff)
 
diff --git a/drivers/usb/gadget/printer.c b/drivers/usb/gadget/printer.c
index 49cd9e145a9b..e0090085b78e 100644
--- a/drivers/usb/gadget/printer.c
+++ b/drivers/usb/gadget/printer.c
@@ -179,7 +179,7 @@ module_param(qlen, uint, S_IRUGO|S_IWUSR);
 
 #define ERROR(dev, fmt, args...) \
 	xprintk(dev, KERN_ERR, fmt, ## args)
-#define WARN(dev, fmt, args...) \
+#define WARNING(dev, fmt, args...) \
 	xprintk(dev, KERN_WARNING, fmt, ## args)
 #define INFO(dev, fmt, args...) \
 	xprintk(dev, KERN_INFO, fmt, ## args)
diff --git a/drivers/usb/gadget/pxa25x_udc.c b/drivers/usb/gadget/pxa25x_udc.c
index 8fb0066609bb..da6e93c201d2 100644
--- a/drivers/usb/gadget/pxa25x_udc.c
+++ b/drivers/usb/gadget/pxa25x_udc.c
@@ -61,7 +61,7 @@
  * This driver is PXA25x only.  Grab the right register definitions.
  */
 #ifdef CONFIG_ARCH_PXA
-#include <asm/arch/pxa25x-udc.h>
+#include <mach/pxa25x-udc.h>
 #endif
 
 #include <asm/mach/udc_pxa2xx.h>
@@ -342,7 +342,7 @@ pxa25x_ep_free_request (struct usb_ep *_ep, struct usb_request *_req)
 	struct pxa25x_request	*req;
 
 	req = container_of (_req, struct pxa25x_request, req);
-	WARN_ON (!list_empty (&req->queue));
+	WARN_ON(!list_empty (&req->queue));
 	kfree(req);
 }
 
@@ -1556,7 +1556,7 @@ config_change:
 					 * tell us about config change events,
 					 * so later ones may fail...
 					 */
-					WARN("config change %02x fail %d?\n",
+					WARNING("config change %02x fail %d?\n",
 						u.r.bRequest, i);
 					return;
 					/* TODO experiment:  if has_cfr,
@@ -2330,7 +2330,7 @@ static int pxa25x_udc_suspend(struct platform_device *dev, pm_message_t state)
 	unsigned long flags;
 
 	if (!udc->mach->gpio_pullup && !udc->mach->udc_command)
-		WARN("USB host won't detect disconnect!\n");
+		WARNING("USB host won't detect disconnect!\n");
 	udc->suspended = 1;
 
 	local_irq_save(flags);
diff --git a/drivers/usb/gadget/pxa25x_udc.h b/drivers/usb/gadget/pxa25x_udc.h
index 4d11ece7c95f..1d51aa21e6eb 100644
--- a/drivers/usb/gadget/pxa25x_udc.h
+++ b/drivers/usb/gadget/pxa25x_udc.h
@@ -139,7 +139,7 @@ struct pxa25x_udc {
 /*-------------------------------------------------------------------------*/
 
 #ifdef CONFIG_ARCH_LUBBOCK
-#include <asm/arch/lubbock.h>
+#include <mach/lubbock.h>
 /* lubbock can also report usb connect/disconnect irqs */
 #endif
 
@@ -259,7 +259,7 @@ dump_state(struct pxa25x_udc *dev)
 #define DBG(lvl, stuff...) do{if ((lvl) <= UDC_DEBUG) DMSG(stuff);}while(0)
 
 #define ERR(stuff...)		pr_err("udc: " stuff)
-#define WARN(stuff...)		pr_warning("udc: " stuff)
+#define WARNING(stuff...)	pr_warning("udc: " stuff)
 #define INFO(stuff...)		pr_info("udc: " stuff)
 
 
diff --git a/drivers/usb/gadget/pxa27x_udc.c b/drivers/usb/gadget/pxa27x_udc.c
index 9d447d8cfc0c..7cbc78a6853d 100644
--- a/drivers/usb/gadget/pxa27x_udc.c
+++ b/drivers/usb/gadget/pxa27x_udc.c
@@ -33,13 +33,13 @@
 #include <linux/irq.h>
 
 #include <asm/byteorder.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 
 #include <linux/usb.h>
 #include <linux/usb/ch9.h>
 #include <linux/usb/gadget.h>
-#include <asm/arch/pxa2xx-regs.h> /* FIXME: for PSSR */
-#include <asm/arch/udc.h>
+#include <mach/pxa2xx-regs.h> /* FIXME: for PSSR */
+#include <mach/udc.h>
 
 #include "pxa27x_udc.h"
 
@@ -1622,7 +1622,7 @@ int usb_gadget_register_driver(struct usb_gadget_driver *driver)
 	struct pxa_udc *udc = the_controller;
 	int retval;
 
-	if (!driver || driver->speed != USB_SPEED_FULL || !driver->bind
+	if (!driver || driver->speed < USB_SPEED_FULL || !driver->bind
 			|| !driver->disconnect || !driver->setup)
 		return -EINVAL;
 	if (!udc)
diff --git a/drivers/usb/gadget/s3c2410_udc.c b/drivers/usb/gadget/s3c2410_udc.c
index 6b1ef488043b..29d13ebe7500 100644
--- a/drivers/usb/gadget/s3c2410_udc.c
+++ b/drivers/usb/gadget/s3c2410_udc.c
@@ -35,7 +35,6 @@
 #include <linux/list.h>
 #include <linux/interrupt.h>
 #include <linux/platform_device.h>
-#include <linux/version.h>
 #include <linux/clk.h>
 
 #include <linux/debugfs.h>
@@ -49,15 +48,14 @@
 #include <asm/irq.h>
 #include <asm/system.h>
 #include <asm/unaligned.h>
-#include <asm/arch/irqs.h>
+#include <mach/irqs.h>
 
-#include <asm/arch/hardware.h>
-#include <asm/arch/regs-gpio.h>
+#include <mach/hardware.h>
+#include <mach/regs-gpio.h>
 
 #include <asm/plat-s3c24xx/regs-udc.h>
 #include <asm/plat-s3c24xx/udc.h>
 
-#include <asm/mach-types.h>
 
 #include "s3c2410_udc.h"
 
@@ -888,7 +886,7 @@ static void s3c2410_udc_handle_ep(struct s3c2410_ep *ep)
 	}
 }
 
-#include <asm/arch/regs-irq.h>
+#include <mach/regs-irq.h>
 
 /*
  *	s3c2410_udc_irq - interrupt handler
diff --git a/drivers/usb/gadget/u_ether.c b/drivers/usb/gadget/u_ether.c
index 5458f43a8668..3791e6271903 100644
--- a/drivers/usb/gadget/u_ether.c
+++ b/drivers/usb/gadget/u_ether.c
@@ -116,7 +116,6 @@ static inline int qlen(struct usb_gadget *gadget)
 #undef DBG
 #undef VDBG
 #undef ERROR
-#undef WARN
 #undef INFO
 
 #define xprintk(d, level, fmt, args...) \
@@ -140,8 +139,6 @@ static inline int qlen(struct usb_gadget *gadget)
 
 #define ERROR(dev, fmt, args...) \
 	xprintk(dev , KERN_ERR , fmt , ## args)
-#define WARN(dev, fmt, args...) \
-	xprintk(dev , KERN_WARNING , fmt , ## args)
 #define INFO(dev, fmt, args...) \
 	xprintk(dev , KERN_INFO , fmt , ## args)
 
diff --git a/drivers/usb/gadget/u_serial.c b/drivers/usb/gadget/u_serial.c
index abf9505d3a75..53d59287f2bc 100644
--- a/drivers/usb/gadget/u_serial.c
+++ b/drivers/usb/gadget/u_serial.c
@@ -52,13 +52,16 @@
  * is managed in userspace ... OBEX, PTP, and MTP have been mentioned.
  */
 
+#define PREFIX	"ttyGS"
+
 /*
  * gserial is the lifecycle interface, used by USB functions
  * gs_port is the I/O nexus, used by the tty driver
  * tty_struct links to the tty/filesystem framework
  *
  * gserial <---> gs_port ... links will be null when the USB link is
- * inactive; managed by gserial_{connect,disconnect}().
+ * inactive; managed by gserial_{connect,disconnect}().  each gserial
+ * instance can wrap its own USB control protocol.
  *	gserial->ioport == usb_ep->driver_data ... gs_port
  *	gs_port->port_usb ... gserial
  *
@@ -100,6 +103,8 @@ struct gs_port {
 	wait_queue_head_t	close_wait;	/* wait for last close */
 
 	struct list_head	read_pool;
+	struct list_head	read_queue;
+	unsigned		n_read;
 	struct tasklet_struct	push;
 
 	struct list_head	write_pool;
@@ -177,7 +182,7 @@ static void gs_buf_clear(struct gs_buf *gb)
 /*
  * gs_buf_data_avail
  *
- * Return the number of bytes of data available in the circular
+ * Return the number of bytes of data written into the circular
  * buffer.
  */
 static unsigned gs_buf_data_avail(struct gs_buf *gb)
@@ -278,7 +283,7 @@ gs_buf_get(struct gs_buf *gb, char *buf, unsigned count)
  * Allocate a usb_request and its buffer.  Returns a pointer to the
  * usb_request or NULL if there is an error.
  */
-static struct usb_request *
+struct usb_request *
 gs_alloc_req(struct usb_ep *ep, unsigned len, gfp_t kmalloc_flags)
 {
 	struct usb_request *req;
@@ -302,7 +307,7 @@ gs_alloc_req(struct usb_ep *ep, unsigned len, gfp_t kmalloc_flags)
  *
  * Free a usb_request and its buffer.
  */
-static void gs_free_req(struct usb_ep *ep, struct usb_request *req)
+void gs_free_req(struct usb_ep *ep, struct usb_request *req)
 {
 	kfree(req->buf);
 	usb_ep_free_request(ep, req);
@@ -367,11 +372,9 @@ __acquires(&port->port_lock)
 		req->length = len;
 		list_del(&req->list);
 
-#ifdef VERBOSE_DEBUG
-		pr_debug("%s: %s, len=%d, 0x%02x 0x%02x 0x%02x ...\n",
-				__func__, in->name, len, *((u8 *)req->buf),
+		pr_vdebug(PREFIX "%d: tx len=%d, 0x%02x 0x%02x 0x%02x ...\n",
+				port->port_num, len, *((u8 *)req->buf),
 				*((u8 *)req->buf+1), *((u8 *)req->buf+2));
-#endif
 
 		/* Drop lock while we call out of driver; completions
 		 * could be issued while we do so.  Disconnection may
@@ -401,56 +404,6 @@ __acquires(&port->port_lock)
 	return status;
 }
 
-static void gs_rx_push(unsigned long _port)
-{
-	struct gs_port		*port = (void *)_port;
-	struct tty_struct	*tty = port->port_tty;
-
-	/* With low_latency, tty_flip_buffer_push() doesn't put its
-	 * real work through a workqueue, so the ldisc has a better
-	 * chance to keep up with peak USB data rates.
-	 */
-	if (tty) {
-		tty_flip_buffer_push(tty);
-		wake_up_interruptible(&tty->read_wait);
-	}
-}
-
-/*
- * gs_recv_packet
- *
- * Called for each USB packet received.  Reads the packet
- * header and stuffs the data in the appropriate tty buffer.
- * Returns 0 if successful, or a negative error number.
- *
- * Called during USB completion routine, on interrupt time.
- * With port_lock.
- */
-static int gs_recv_packet(struct gs_port *port, char *packet, unsigned size)
-{
-	unsigned		len;
-	struct tty_struct	*tty;
-
-	/* I/O completions can continue for a while after close(), until the
-	 * request queue empties.  Just discard any data we receive, until
-	 * something reopens this TTY ... as if there were no HW flow control.
-	 */
-	tty = port->port_tty;
-	if (tty == NULL) {
-		pr_vdebug("%s: ttyGS%d, after close\n",
-				__func__, port->port_num);
-		return -EIO;
-	}
-
-	len = tty_insert_flip_string(tty, packet, size);
-	if (len > 0)
-		tasklet_schedule(&port->push);
-	if (len < size)
-		pr_debug("%s: ttyGS%d, drop %d bytes\n",
-				__func__, port->port_num, size - len);
-	return 0;
-}
-
 /*
  * Context: caller owns port_lock, and port_usb is set
  */
@@ -469,9 +422,9 @@ __acquires(&port->port_lock)
 		int			status;
 		struct tty_struct	*tty;
 
-		/* no more rx if closed or throttled */
+		/* no more rx if closed */
 		tty = port->port_tty;
-		if (!tty || test_bit(TTY_THROTTLED, &tty->flags))
+		if (!tty)
 			break;
 
 		req = list_entry(pool->next, struct usb_request, list);
@@ -500,36 +453,134 @@ __acquires(&port->port_lock)
 	return started;
 }
 
-static void gs_read_complete(struct usb_ep *ep, struct usb_request *req)
+/*
+ * RX tasklet takes data out of the RX queue and hands it up to the TTY
+ * layer until it refuses to take any more data (or is throttled back).
+ * Then it issues reads for any further data.
+ *
+ * If the RX queue becomes full enough that no usb_request is queued,
+ * the OUT endpoint may begin NAKing as soon as its FIFO fills up.
+ * So QUEUE_SIZE packets plus however many the FIFO holds (usually two)
+ * can be buffered before the TTY layer's buffers (currently 64 KB).
+ */
+static void gs_rx_push(unsigned long _port)
 {
-	int		status;
-	struct gs_port	*port = ep->driver_data;
+	struct gs_port		*port = (void *)_port;
+	struct tty_struct	*tty;
+	struct list_head	*queue = &port->read_queue;
+	bool			disconnect = false;
+	bool			do_push = false;
 
-	spin_lock(&port->port_lock);
-	list_add(&req->list, &port->read_pool);
+	/* hand any queued data to the tty */
+	spin_lock_irq(&port->port_lock);
+	tty = port->port_tty;
+	while (!list_empty(queue)) {
+		struct usb_request	*req;
 
-	switch (req->status) {
-	case 0:
-		/* normal completion */
-		status = gs_recv_packet(port, req->buf, req->actual);
-		if (status && status != -EIO)
-			pr_debug("%s: %s %s err %d\n",
-				__func__, "recv", ep->name, status);
-		gs_start_rx(port);
-		break;
+		req = list_first_entry(queue, struct usb_request, list);
 
-	case -ESHUTDOWN:
-		/* disconnect */
-		pr_vdebug("%s: %s shutdown\n", __func__, ep->name);
-		break;
+		/* discard data if tty was closed */
+		if (!tty)
+			goto recycle;
 
-	default:
-		/* presumably a transient fault */
-		pr_warning("%s: unexpected %s status %d\n",
-				__func__, ep->name, req->status);
-		gs_start_rx(port);
-		break;
+		/* leave data queued if tty was rx throttled */
+		if (test_bit(TTY_THROTTLED, &tty->flags))
+			break;
+
+		switch (req->status) {
+		case -ESHUTDOWN:
+			disconnect = true;
+			pr_vdebug(PREFIX "%d: shutdown\n", port->port_num);
+			break;
+
+		default:
+			/* presumably a transient fault */
+			pr_warning(PREFIX "%d: unexpected RX status %d\n",
+					port->port_num, req->status);
+			/* FALLTHROUGH */
+		case 0:
+			/* normal completion */
+			break;
+		}
+
+		/* push data to (open) tty */
+		if (req->actual) {
+			char		*packet = req->buf;
+			unsigned	size = req->actual;
+			unsigned	n;
+			int		count;
+
+			/* we may have pushed part of this packet already... */
+			n = port->n_read;
+			if (n) {
+				packet += n;
+				size -= n;
+			}
+
+			count = tty_insert_flip_string(tty, packet, size);
+			if (count)
+				do_push = true;
+			if (count != size) {
+				/* stop pushing; TTY layer can't handle more */
+				port->n_read += count;
+				pr_vdebug(PREFIX "%d: rx block %d/%d\n",
+						port->port_num,
+						count, req->actual);
+				break;
+			}
+			port->n_read = 0;
+		}
+recycle:
+		list_move(&req->list, &port->read_pool);
 	}
+
+	/* Push from tty to ldisc; this is immediate with low_latency, and
+	 * may trigger callbacks to this driver ... so drop the spinlock.
+	 */
+	if (tty && do_push) {
+		spin_unlock_irq(&port->port_lock);
+		tty_flip_buffer_push(tty);
+		wake_up_interruptible(&tty->read_wait);
+		spin_lock_irq(&port->port_lock);
+
+		/* tty may have been closed */
+		tty = port->port_tty;
+	}
+
+
+	/* We want our data queue to become empty ASAP, keeping data
+	 * in the tty and ldisc (not here).  If we couldn't push any
+	 * this time around, there may be trouble unless there's an
+	 * implicit tty_unthrottle() call on its way...
+	 *
+	 * REVISIT we should probably add a timer to keep the tasklet
+	 * from starving ... but it's not clear that case ever happens.
+	 */
+	if (!list_empty(queue) && tty) {
+		if (!test_bit(TTY_THROTTLED, &tty->flags)) {
+			if (do_push)
+				tasklet_schedule(&port->push);
+			else
+				pr_warning(PREFIX "%d: RX not scheduled?\n",
+					port->port_num);
+		}
+	}
+
+	/* If we're still connected, refill the USB RX queue. */
+	if (!disconnect && port->port_usb)
+		gs_start_rx(port);
+
+	spin_unlock_irq(&port->port_lock);
+}
+
+static void gs_read_complete(struct usb_ep *ep, struct usb_request *req)
+{
+	struct gs_port	*port = ep->driver_data;
+
+	/* Queue all received data until the tty layer is ready for it. */
+	spin_lock(&port->port_lock);
+	list_add_tail(&req->list, &port->read_queue);
+	tasklet_schedule(&port->push);
 	spin_unlock(&port->port_lock);
 }
 
@@ -625,6 +676,7 @@ static int gs_start_io(struct gs_port *port)
 	}
 
 	/* queue read requests */
+	port->n_read = 0;
 	started = gs_start_rx(port);
 
 	/* unblock any pending writes into our circular buffer */
@@ -633,9 +685,10 @@ static int gs_start_io(struct gs_port *port)
 	} else {
 		gs_free_requests(ep, head);
 		gs_free_requests(port->port_usb->in, &port->write_pool);
+		status = -EIO;
 	}
 
-	return started ? 0 : status;
+	return status;
 }
 
 /*-------------------------------------------------------------------------*/
@@ -736,10 +789,13 @@ static int gs_open(struct tty_struct *tty, struct file *file)
 
 	/* if connected, start the I/O stream */
 	if (port->port_usb) {
+		struct gserial	*gser = port->port_usb;
+
 		pr_debug("gs_open: start ttyGS%d\n", port->port_num);
 		gs_start_io(port);
 
-		/* REVISIT for ACM, issue "network connected" event */
+		if (gser->connect)
+			gser->connect(gser);
 	}
 
 	pr_debug("gs_open: ttyGS%d (%p,%p)\n", port->port_num, tty, file);
@@ -766,6 +822,7 @@ static int gs_writes_finished(struct gs_port *p)
 static void gs_close(struct tty_struct *tty, struct file *file)
 {
 	struct gs_port *port = tty->driver_data;
+	struct gserial	*gser;
 
 	spin_lock_irq(&port->port_lock);
 
@@ -785,32 +842,31 @@ static void gs_close(struct tty_struct *tty, struct file *file)
 	port->openclose = true;
 	port->open_count = 0;
 
-	if (port->port_usb)
-		/* REVISIT for ACM, issue "network disconnected" event */;
+	gser = port->port_usb;
+	if (gser && gser->disconnect)
+		gser->disconnect(gser);
 
 	/* wait for circular write buffer to drain, disconnect, or at
 	 * most GS_CLOSE_TIMEOUT seconds; then discard the rest
 	 */
-	if (gs_buf_data_avail(&port->port_write_buf) > 0
-			&& port->port_usb) {
+	if (gs_buf_data_avail(&port->port_write_buf) > 0 && gser) {
 		spin_unlock_irq(&port->port_lock);
 		wait_event_interruptible_timeout(port->drain_wait,
 					gs_writes_finished(port),
 					GS_CLOSE_TIMEOUT * HZ);
 		spin_lock_irq(&port->port_lock);
+		gser = port->port_usb;
 	}
 
 	/* Iff we're disconnected, there can be no I/O in flight so it's
 	 * ok to free the circular buffer; else just scrub it.  And don't
 	 * let the push tasklet fire again until we're re-opened.
 	 */
-	if (port->port_usb == NULL)
+	if (gser == NULL)
 		gs_buf_free(&port->port_write_buf);
 	else
 		gs_buf_clear(&port->port_write_buf);
 
-	tasklet_kill(&port->push);
-
 	tty->driver_data = NULL;
 	port->port_tty = NULL;
 
@@ -911,15 +967,35 @@ static void gs_unthrottle(struct tty_struct *tty)
 {
 	struct gs_port		*port = tty->driver_data;
 	unsigned long		flags;
-	unsigned		started = 0;
 
 	spin_lock_irqsave(&port->port_lock, flags);
-	if (port->port_usb)
-		started = gs_start_rx(port);
+	if (port->port_usb) {
+		/* Kickstart read queue processing.  We don't do xon/xoff,
+		 * rts/cts, or other handshaking with the host, but if the
+		 * read queue backs up enough we'll be NAKing OUT packets.
+		 */
+		tasklet_schedule(&port->push);
+		pr_vdebug(PREFIX "%d: unthrottle\n", port->port_num);
+	}
 	spin_unlock_irqrestore(&port->port_lock, flags);
+}
+
+static int gs_break_ctl(struct tty_struct *tty, int duration)
+{
+	struct gs_port	*port = tty->driver_data;
+	int		status = 0;
+	struct gserial	*gser;
+
+	pr_vdebug("gs_break_ctl: ttyGS%d, send break (%d) \n",
+			port->port_num, duration);
 
-	pr_vdebug("gs_unthrottle: ttyGS%d, %d packets\n",
-			port->port_num, started);
+	spin_lock_irq(&port->port_lock);
+	gser = port->port_usb;
+	if (gser && gser->send_break)
+		status = gser->send_break(gser, duration);
+	spin_unlock_irq(&port->port_lock);
+
+	return status;
 }
 
 static const struct tty_operations gs_tty_ops = {
@@ -931,6 +1007,7 @@ static const struct tty_operations gs_tty_ops = {
 	.write_room =		gs_write_room,
 	.chars_in_buffer =	gs_chars_in_buffer,
 	.unthrottle =		gs_unthrottle,
+	.break_ctl =		gs_break_ctl,
 };
 
 /*-------------------------------------------------------------------------*/
@@ -953,6 +1030,7 @@ gs_port_alloc(unsigned port_num, struct usb_cdc_line_coding *coding)
 	tasklet_init(&port->push, gs_rx_push, (unsigned long) port);
 
 	INIT_LIST_HEAD(&port->read_pool);
+	INIT_LIST_HEAD(&port->read_queue);
 	INIT_LIST_HEAD(&port->write_pool);
 
 	port->port_num = port_num;
@@ -997,7 +1075,7 @@ int __init gserial_setup(struct usb_gadget *g, unsigned count)
 
 	gs_tty_driver->owner = THIS_MODULE;
 	gs_tty_driver->driver_name = "g_serial";
-	gs_tty_driver->name = "ttyGS";
+	gs_tty_driver->name = PREFIX;
 	/* uses dynamically assigned dev_t values */
 
 	gs_tty_driver->type = TTY_DRIVER_TYPE_SERIAL;
@@ -1104,6 +1182,8 @@ void gserial_cleanup(void)
 		ports[i].port = NULL;
 		mutex_unlock(&ports[i].lock);
 
+		tasklet_kill(&port->push);
+
 		/* wait for old opens to finish */
 		wait_event(port->close_wait, gs_closed(port));
 
@@ -1175,14 +1255,17 @@ int gserial_connect(struct gserial *gser, u8 port_num)
 
 	/* REVISIT if waiting on "carrier detect", signal. */
 
-	/* REVISIT for ACM, issue "network connection" status notification:
-	 * connected if open_count, else disconnected.
+	/* if it's already open, start I/O ... and notify the serial
+	 * protocol about open/close status (connect/disconnect).
 	 */
-
-	/* if it's already open, start I/O */
 	if (port->open_count) {
 		pr_debug("gserial_connect: start ttyGS%d\n", port->port_num);
 		gs_start_io(port);
+		if (gser->connect)
+			gser->connect(gser);
+	} else {
+		if (gser->disconnect)
+			gser->disconnect(gser);
 	}
 
 	spin_unlock_irqrestore(&port->port_lock, flags);
@@ -1241,6 +1324,7 @@ void gserial_disconnect(struct gserial *gser)
 	if (port->open_count == 0 && !port->openclose)
 		gs_buf_free(&port->port_write_buf);
 	gs_free_requests(gser->out, &port->read_pool);
+	gs_free_requests(gser->out, &port->read_queue);
 	gs_free_requests(gser->in, &port->write_pool);
 	spin_unlock_irqrestore(&port->port_lock, flags);
 }
diff --git a/drivers/usb/gadget/u_serial.h b/drivers/usb/gadget/u_serial.h
index 7b561138f90e..af3910d01aea 100644
--- a/drivers/usb/gadget/u_serial.h
+++ b/drivers/usb/gadget/u_serial.h
@@ -23,8 +23,7 @@
  * style I/O using the USB peripheral endpoints listed here, including
  * hookups to sysfs and /dev for each logical "tty" device.
  *
- * REVISIT need TTY --> USB event flow too, so ACM can report open/close
- * as carrier detect events.  Model after ECM.  There's more ACM state too.
+ * REVISIT at least ACM could support tiocmget() if needed.
  *
  * REVISIT someday, allow multiplexing several TTYs over these endpoints.
  */
@@ -41,8 +40,17 @@ struct gserial {
 
 	/* REVISIT avoid this CDC-ACM support harder ... */
 	struct usb_cdc_line_coding port_line_coding;	/* 9600-8-N-1 etc */
+
+	/* notification callbacks */
+	void (*connect)(struct gserial *p);
+	void (*disconnect)(struct gserial *p);
+	int (*send_break)(struct gserial *p, int duration);
 };
 
+/* utilities to allocate/free request and buffer */
+struct usb_request *gs_alloc_req(struct usb_ep *ep, unsigned len, gfp_t flags);
+void gs_free_req(struct usb_ep *, struct usb_request *req);
+
 /* port setup/teardown is handled by gadget driver */
 int gserial_setup(struct usb_gadget *g, unsigned n_ports);
 void gserial_cleanup(void);
diff --git a/drivers/usb/host/ehci-orion.c b/drivers/usb/host/ehci-orion.c
index 5fbdc14e63b3..5416cf969005 100644
--- a/drivers/usb/host/ehci-orion.c
+++ b/drivers/usb/host/ehci-orion.c
@@ -12,7 +12,7 @@
 #include <linux/module.h>
 #include <linux/platform_device.h>
 #include <linux/mbus.h>
-#include <asm/plat-orion/ehci-orion.h>
+#include <plat/ehci-orion.h>
 
 #define rdl(off)	__raw_readl(hcd->regs + (off))
 #define wrl(off, val)	__raw_writel((val), hcd->regs + (off))
diff --git a/drivers/usb/host/ehci-q.c b/drivers/usb/host/ehci-q.c
index 2622b6596d7c..3712b925b315 100644
--- a/drivers/usb/host/ehci-q.c
+++ b/drivers/usb/host/ehci-q.c
@@ -932,7 +932,7 @@ static struct ehci_qh *qh_append_tds (
 
 			list_del (&qtd->qtd_list);
 			list_add (&dummy->qtd_list, qtd_list);
-			__list_splice (qtd_list, qh->qtd_list.prev);
+			list_splice_tail(qtd_list, &qh->qtd_list);
 
 			ehci_qtd_init(ehci, qtd, qtd->qtd_dma);
 			qh->dummy = qtd;
diff --git a/drivers/usb/host/isp116x-hcd.c b/drivers/usb/host/isp116x-hcd.c
index 31178e10cbbe..ce1ca0ba0515 100644
--- a/drivers/usb/host/isp116x-hcd.c
+++ b/drivers/usb/host/isp116x-hcd.c
@@ -882,7 +882,7 @@ static void isp116x_endpoint_disable(struct usb_hcd *hcd,
 	for (i = 0; i < 100 && !list_empty(&hep->urb_list); i++)
 		msleep(3);
 	if (!list_empty(&hep->urb_list))
-		WARN("ep %p not empty?\n", ep);
+		WARNING("ep %p not empty?\n", ep);
 
 	kfree(ep);
 	hep->hcpriv = NULL;
diff --git a/drivers/usb/host/isp116x.h b/drivers/usb/host/isp116x.h
index 595b90a99848..aa211bafcff9 100644
--- a/drivers/usb/host/isp116x.h
+++ b/drivers/usb/host/isp116x.h
@@ -338,7 +338,7 @@ struct isp116x_ep {
 #endif
 
 #define ERR(stuff...)		printk(KERN_ERR "116x: " stuff)
-#define WARN(stuff...)		printk(KERN_WARNING "116x: " stuff)
+#define WARNING(stuff...)	printk(KERN_WARNING "116x: " stuff)
 #define INFO(stuff...)		printk(KERN_INFO "116x: " stuff)
 
 /* ------------------------------------------------- */
diff --git a/drivers/usb/host/isp1760-hcd.c b/drivers/usb/host/isp1760-hcd.c
index c858f2adb929..8017f1cf78e2 100644
--- a/drivers/usb/host/isp1760-hcd.c
+++ b/drivers/usb/host/isp1760-hcd.c
@@ -126,9 +126,8 @@ static void isp1760_writel(const unsigned int val, __u32 __iomem *regs)
  * doesn't quite work because some people have to enforce 32-bit access
  */
 static void priv_read_copy(struct isp1760_hcd *priv, u32 *src,
-		__u32 __iomem *dst, u32 offset, u32 len)
+		__u32 __iomem *dst, u32 len)
 {
-	struct usb_hcd *hcd = priv_to_hcd(priv);
 	u32 val;
 	u8 *buff8;
 
@@ -136,11 +135,6 @@ static void priv_read_copy(struct isp1760_hcd *priv, u32 *src,
 		printk(KERN_ERR "ERROR: buffer: %p len: %d\n", src, len);
 		return;
 	}
-	isp1760_writel(offset,  hcd->regs + HC_MEMORY_REG);
-	/* XXX
-	 * 90nsec delay, the spec says something how this could be avoided.
-	 */
-	mdelay(1);
 
 	while (len >= 4) {
 		*src = __raw_readl(dst);
@@ -987,8 +981,20 @@ static void do_atl_int(struct usb_hcd *usb_hcd)
 			printk(KERN_ERR "qh is 0\n");
 			continue;
 		}
-		priv_read_copy(priv, (u32 *)&ptd, usb_hcd->regs + atl_regs,
-				atl_regs, sizeof(ptd));
+		isp1760_writel(atl_regs + ISP_BANK(0), usb_hcd->regs +
+				HC_MEMORY_REG);
+		isp1760_writel(payload  + ISP_BANK(1), usb_hcd->regs +
+				HC_MEMORY_REG);
+		/*
+		 * write bank1 address twice to ensure the 90ns delay (time
+		 * between BANK0 write and the priv_read_copy() call is at
+		 * least 3*t_WHWL + 2*t_w11 = 3*25ns + 2*17ns = 109ns)
+		 */
+		isp1760_writel(payload  + ISP_BANK(1), usb_hcd->regs +
+				HC_MEMORY_REG);
+
+		priv_read_copy(priv, (u32 *)&ptd, usb_hcd->regs + atl_regs +
+				ISP_BANK(0), sizeof(ptd));
 
 		dw1 = le32_to_cpu(ptd.dw1);
 		dw2 = le32_to_cpu(ptd.dw2);
@@ -1091,7 +1097,7 @@ static void do_atl_int(struct usb_hcd *usb_hcd)
 			case IN_PID:
 				priv_read_copy(priv,
 					priv->atl_ints[queue_entry].data_buffer,
-					usb_hcd->regs + payload, payload,
+					usb_hcd->regs + payload + ISP_BANK(1),
 					length);
 
 			case OUT_PID:
@@ -1122,11 +1128,11 @@ static void do_atl_int(struct usb_hcd *usb_hcd)
 		} else if (usb_pipebulk(urb->pipe) && (length < qtd->length)) {
 			/* short BULK received */
 
-			printk(KERN_ERR "short bulk, %d instead %zu\n", length,
-					qtd->length);
 			if (urb->transfer_flags & URB_SHORT_NOT_OK) {
 				urb->status = -EREMOTEIO;
-				printk(KERN_ERR "not okey\n");
+				isp1760_dbg(priv, "short bulk, %d instead %zu "
+					"with URB_SHORT_NOT_OK flag.\n",
+					length, qtd->length);
 			}
 
 			if (urb->status == -EINPROGRESS)
@@ -1206,8 +1212,20 @@ static void do_intl_int(struct usb_hcd *usb_hcd)
 			continue;
 		}
 
-		priv_read_copy(priv, (u32 *)&ptd, usb_hcd->regs + int_regs,
-				int_regs, sizeof(ptd));
+		isp1760_writel(int_regs + ISP_BANK(0), usb_hcd->regs +
+				HC_MEMORY_REG);
+		isp1760_writel(payload  + ISP_BANK(1), usb_hcd->regs +
+				HC_MEMORY_REG);
+		/*
+		 * write bank1 address twice to ensure the 90ns delay (time
+		 * between BANK0 write and the priv_read_copy() call is at
+		 * least 3*t_WHWL + 2*t_w11 = 3*25ns + 2*17ns = 92ns)
+		 */
+		isp1760_writel(payload  + ISP_BANK(1), usb_hcd->regs +
+				HC_MEMORY_REG);
+
+		priv_read_copy(priv, (u32 *)&ptd, usb_hcd->regs + int_regs +
+				ISP_BANK(0), sizeof(ptd));
 		dw1 = le32_to_cpu(ptd.dw1);
 		dw3 = le32_to_cpu(ptd.dw3);
 		check_int_err_status(le32_to_cpu(ptd.dw4));
@@ -1242,7 +1260,7 @@ static void do_intl_int(struct usb_hcd *usb_hcd)
 			case IN_PID:
 				priv_read_copy(priv,
 					priv->int_ints[queue_entry].data_buffer,
-					usb_hcd->regs + payload , payload,
+					usb_hcd->regs + payload + ISP_BANK(1),
 					length);
 			case OUT_PID:
 
@@ -1615,8 +1633,7 @@ static int isp1760_urb_enqueue(struct usb_hcd *hcd, struct urb *urb,
 		return -EPIPE;
 	}
 
-	isp1760_prepare_enqueue(priv, urb, &qtd_list, mem_flags, pe);
-	return 0;
+	return isp1760_prepare_enqueue(priv, urb, &qtd_list, mem_flags, pe);
 }
 
 static int isp1760_urb_dequeue(struct usb_hcd *hcd, struct urb *urb,
diff --git a/drivers/usb/host/isp1760-hcd.h b/drivers/usb/host/isp1760-hcd.h
index 6473dd86993c..4377277667d9 100644
--- a/drivers/usb/host/isp1760-hcd.h
+++ b/drivers/usb/host/isp1760-hcd.h
@@ -54,6 +54,8 @@ void deinit_kmem_cache(void);
 #define BUFFER_MAP		0x7
 
 #define HC_MEMORY_REG		0x33c
+#define ISP_BANK(x)		((x) << 16)
+
 #define HC_PORT1_CTRL		0x374
 #define PORT1_POWER		(3 << 3)
 #define PORT1_INIT1		(1 << 7)
@@ -119,6 +121,9 @@ struct inter_packet_info {
 typedef void (packet_enqueue)(struct usb_hcd *hcd, struct isp1760_qh *qh,
 		struct isp1760_qtd *qtd);
 
+#define isp1760_dbg(priv, fmt, args...) \
+	dev_dbg(priv_to_hcd(priv)->self.controller, fmt, ##args)
+
 #define isp1760_info(priv, fmt, args...) \
 	dev_info(priv_to_hcd(priv)->self.controller, fmt, ##args)
 
diff --git a/drivers/usb/host/ohci-at91.c b/drivers/usb/host/ohci-at91.c
index a5d8e550d897..4ed228a89943 100644
--- a/drivers/usb/host/ohci-at91.c
+++ b/drivers/usb/host/ohci-at91.c
@@ -15,12 +15,11 @@
 #include <linux/clk.h>
 #include <linux/platform_device.h>
 
-#include <asm/mach-types.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/gpio.h>
 
-#include <asm/arch/board.h>
-#include <asm/arch/cpu.h>
+#include <mach/board.h>
+#include <mach/cpu.h>
 
 #ifndef CONFIG_ARCH_AT91
 #error "CONFIG_ARCH_AT91 must be defined."
@@ -261,7 +260,6 @@ static const struct hc_driver ohci_at91_hc_driver = {
 	 */
 	.hub_status_data =	ohci_hub_status_data,
 	.hub_control =		ohci_hub_control,
-	.hub_irq_enable =	ohci_rhsc_enable,
 #ifdef CONFIG_PM
 	.bus_suspend =		ohci_bus_suspend,
 	.bus_resume =		ohci_bus_resume,
diff --git a/drivers/usb/host/ohci-au1xxx.c b/drivers/usb/host/ohci-au1xxx.c
index c0948008fe3d..2ac4e022a13f 100644
--- a/drivers/usb/host/ohci-au1xxx.c
+++ b/drivers/usb/host/ohci-au1xxx.c
@@ -163,7 +163,6 @@ static const struct hc_driver ohci_au1xxx_hc_driver = {
 	 */
 	.hub_status_data =	ohci_hub_status_data,
 	.hub_control =		ohci_hub_control,
-	.hub_irq_enable =	ohci_rhsc_enable,
 #ifdef	CONFIG_PM
 	.bus_suspend =		ohci_bus_suspend,
 	.bus_resume =		ohci_bus_resume,
diff --git a/drivers/usb/host/ohci-ep93xx.c b/drivers/usb/host/ohci-ep93xx.c
index 5adaf36e47d0..fb3055f084b5 100644
--- a/drivers/usb/host/ohci-ep93xx.c
+++ b/drivers/usb/host/ohci-ep93xx.c
@@ -28,8 +28,7 @@
 #include <linux/signal.h>
 #include <linux/platform_device.h>
 
-#include <asm/mach-types.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 
 static struct clk *usb_host_clock;
 
@@ -135,7 +134,6 @@ static struct hc_driver ohci_ep93xx_hc_driver = {
 	.get_frame_number	= ohci_get_frame,
 	.hub_status_data	= ohci_hub_status_data,
 	.hub_control		= ohci_hub_control,
-	.hub_irq_enable		= ohci_rhsc_enable,
 #ifdef CONFIG_PM
 	.bus_suspend		= ohci_bus_suspend,
 	.bus_resume		= ohci_bus_resume,
diff --git a/drivers/usb/host/ohci-hcd.c b/drivers/usb/host/ohci-hcd.c
index 26bc47941d01..89901962cbfd 100644
--- a/drivers/usb/host/ohci-hcd.c
+++ b/drivers/usb/host/ohci-hcd.c
@@ -86,6 +86,21 @@ static void ohci_stop (struct usb_hcd *hcd);
 static int ohci_restart (struct ohci_hcd *ohci);
 #endif
 
+#ifdef CONFIG_PCI
+static void quirk_amd_pll(int state);
+static void amd_iso_dev_put(void);
+#else
+static inline void quirk_amd_pll(int state)
+{
+	return;
+}
+static inline void amd_iso_dev_put(void)
+{
+	return;
+}
+#endif
+
+
 #include "ohci-hub.c"
 #include "ohci-dbg.c"
 #include "ohci-mem.c"
@@ -483,6 +498,9 @@ static int ohci_init (struct ohci_hcd *ohci)
 	int ret;
 	struct usb_hcd *hcd = ohci_to_hcd(ohci);
 
+	if (distrust_firmware)
+		ohci->flags |= OHCI_QUIRK_HUB_POWER;
+
 	disable (ohci);
 	ohci->regs = hcd->regs;
 
@@ -689,7 +707,8 @@ retry:
 		temp |= RH_A_NOCP;
 		temp &= ~(RH_A_POTPGT | RH_A_NPS);
 		ohci_writel (ohci, temp, &ohci->regs->roothub.a);
-	} else if ((ohci->flags & OHCI_QUIRK_AMD756) || distrust_firmware) {
+	} else if ((ohci->flags & OHCI_QUIRK_AMD756) ||
+			(ohci->flags & OHCI_QUIRK_HUB_POWER)) {
 		/* hub power always on; required for AMD-756 and some
 		 * Mac platforms.  ganged overcurrent reporting, if any.
 		 */
@@ -882,6 +901,8 @@ static void ohci_stop (struct usb_hcd *hcd)
 
 	if (quirk_zfmicro(ohci))
 		del_timer(&ohci->unlink_watchdog);
+	if (quirk_amdiso(ohci))
+		amd_iso_dev_put();
 
 	remove_debug_files (ohci);
 	ohci_mem_cleanup (ohci);
diff --git a/drivers/usb/host/ohci-hub.c b/drivers/usb/host/ohci-hub.c
index b56739221d11..7ea9a7b31155 100644
--- a/drivers/usb/host/ohci-hub.c
+++ b/drivers/usb/host/ohci-hub.c
@@ -36,18 +36,6 @@
 
 /*-------------------------------------------------------------------------*/
 
-/* hcd->hub_irq_enable() */
-static void ohci_rhsc_enable (struct usb_hcd *hcd)
-{
-	struct ohci_hcd		*ohci = hcd_to_ohci (hcd);
-
-	spin_lock_irq(&ohci->lock);
-	if (!ohci->autostop)
-		del_timer(&hcd->rh_timer);	/* Prevent next poll */
-	ohci_writel(ohci, OHCI_INTR_RHSC, &ohci->regs->intrenable);
-	spin_unlock_irq(&ohci->lock);
-}
-
 #define OHCI_SCHED_ENABLES \
 	(OHCI_CTRL_CLE|OHCI_CTRL_BLE|OHCI_CTRL_PLE|OHCI_CTRL_IE)
 
@@ -374,18 +362,28 @@ static int ohci_root_hub_state_changes(struct ohci_hcd *ohci, int changed,
 		int any_connected)
 {
 	int	poll_rh = 1;
+	int	rhsc;
 
+	rhsc = ohci_readl(ohci, &ohci->regs->intrenable) & OHCI_INTR_RHSC;
 	switch (ohci->hc_control & OHCI_CTRL_HCFS) {
 
 	case OHCI_USB_OPER:
-		/* keep on polling until we know a device is connected
-		 * and RHSC is enabled */
+		/* If no status changes are pending, enable status-change
+		 * interrupts.
+		 */
+		if (!rhsc && !changed) {
+			rhsc = OHCI_INTR_RHSC;
+			ohci_writel(ohci, rhsc, &ohci->regs->intrenable);
+		}
+
+		/* Keep on polling until we know a device is connected
+		 * and RHSC is enabled, or until we autostop.
+		 */
 		if (!ohci->autostop) {
 			if (any_connected ||
 					!device_may_wakeup(&ohci_to_hcd(ohci)
 						->self.root_hub->dev)) {
-				if (ohci_readl(ohci, &ohci->regs->intrenable) &
-						OHCI_INTR_RHSC)
+				if (rhsc)
 					poll_rh = 0;
 			} else {
 				ohci->autostop = 1;
@@ -398,12 +396,13 @@ static int ohci_root_hub_state_changes(struct ohci_hcd *ohci, int changed,
 				ohci->autostop = 0;
 				ohci->next_statechange = jiffies +
 						STATECHANGE_DELAY;
-			} else if (time_after_eq(jiffies,
+			} else if (rhsc && time_after_eq(jiffies,
 						ohci->next_statechange)
 					&& !ohci->ed_rm_list
 					&& !(ohci->hc_control &
 						OHCI_SCHED_ENABLES)) {
 				ohci_rh_suspend(ohci, 1);
+				poll_rh = 0;
 			}
 		}
 		break;
@@ -417,6 +416,12 @@ static int ohci_root_hub_state_changes(struct ohci_hcd *ohci, int changed,
 			else
 				usb_hcd_resume_root_hub(ohci_to_hcd(ohci));
 		} else {
+			if (!rhsc && (ohci->autostop ||
+					ohci_to_hcd(ohci)->self.root_hub->
+						do_remote_wakeup))
+				ohci_writel(ohci, OHCI_INTR_RHSC,
+						&ohci->regs->intrenable);
+
 			/* everything is idle, no need for polling */
 			poll_rh = 0;
 		}
@@ -438,12 +443,16 @@ static inline int ohci_rh_resume(struct ohci_hcd *ohci)
 static int ohci_root_hub_state_changes(struct ohci_hcd *ohci, int changed,
 		int any_connected)
 {
-	int	poll_rh = 1;
-
-	/* keep on polling until RHSC is enabled */
+	/* If RHSC is enabled, don't poll */
 	if (ohci_readl(ohci, &ohci->regs->intrenable) & OHCI_INTR_RHSC)
-		poll_rh = 0;
-	return poll_rh;
+		return 0;
+
+	/* If no status changes are pending, enable status-change interrupts */
+	if (!changed) {
+		ohci_writel(ohci, OHCI_INTR_RHSC, &ohci->regs->intrenable);
+		return 0;
+	}
+	return 1;
 }
 
 #endif	/* CONFIG_PM */
@@ -483,6 +492,13 @@ ohci_hub_status_data (struct usb_hcd *hcd, char *buf)
 		length++;
 	}
 
+	/* Some broken controllers never turn off RHCS in the interrupt
+	 * status register.  For their sake we won't re-enable RHSC
+	 * interrupts if the flag is already set.
+	 */
+	if (ohci_readl(ohci, &ohci->regs->intrstatus) & OHCI_INTR_RHSC)
+		changed = 1;
+
 	/* look at each port */
 	for (i = 0; i < ohci->num_ports; i++) {
 		u32	status = roothub_portstatus (ohci, i);
@@ -572,8 +588,6 @@ static int ohci_start_port_reset (struct usb_hcd *hcd, unsigned port)
 	return 0;
 }
 
-static void start_hnp(struct ohci_hcd *ohci);
-
 #else
 
 #define	ohci_start_port_reset		NULL
@@ -760,7 +774,7 @@ static int ohci_hub_control (
 #ifdef	CONFIG_USB_OTG
 			if (hcd->self.otg_port == (wIndex + 1)
 					&& hcd->self.b_hnp_enable)
-				start_hnp(ohci);
+				ohci->start_hnp(ohci);
 			else
 #endif
 			ohci_writel (ohci, RH_PS_PSS,
diff --git a/drivers/usb/host/ohci-lh7a404.c b/drivers/usb/host/ohci-lh7a404.c
index 1ef5d482c145..de42283149c7 100644
--- a/drivers/usb/host/ohci-lh7a404.c
+++ b/drivers/usb/host/ohci-lh7a404.c
@@ -19,7 +19,7 @@
 #include <linux/platform_device.h>
 #include <linux/signal.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 
 
 extern int usb_disabled(void);
@@ -193,7 +193,6 @@ static const struct hc_driver ohci_lh7a404_hc_driver = {
 	 */
 	.hub_status_data =	ohci_hub_status_data,
 	.hub_control =		ohci_hub_control,
-	.hub_irq_enable =	ohci_rhsc_enable,
 #ifdef	CONFIG_PM
 	.bus_suspend =		ohci_bus_suspend,
 	.bus_resume =		ohci_bus_resume,
diff --git a/drivers/usb/host/ohci-omap.c b/drivers/usb/host/ohci-omap.c
index 6e5e5f81ac90..1eb64d08b60a 100644
--- a/drivers/usb/host/ohci-omap.c
+++ b/drivers/usb/host/ohci-omap.c
@@ -19,15 +19,15 @@
 #include <linux/platform_device.h>
 #include <linux/clk.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 #include <asm/mach-types.h>
 
-#include <asm/arch/mux.h>
-#include <asm/arch/irqs.h>
-#include <asm/arch/gpio.h>
-#include <asm/arch/fpga.h>
-#include <asm/arch/usb.h>
+#include <mach/mux.h>
+#include <mach/irqs.h>
+#include <mach/gpio.h>
+#include <mach/fpga.h>
+#include <mach/usb.h>
 
 
 /* OMAP-1510 OHCI has its own MMU for DMA */
@@ -225,6 +225,7 @@ static int ohci_omap_init(struct usb_hcd *hcd)
 			dev_err(hcd->self.controller, "can't find transceiver\n");
 			return -ENODEV;
 		}
+		ohci->start_hnp = start_hnp;
 	}
 #endif
 
@@ -260,7 +261,7 @@ static int ohci_omap_init(struct usb_hcd *hcd)
 			omap_cfg_reg(W4_USB_HIGHZ);
 		}
 		ohci_writel(ohci, rh, &ohci->regs->roothub.a);
-		distrust_firmware = 0;
+		ohci->flags &= ~OHCI_QUIRK_HUB_POWER;
 	} else if (machine_is_nokia770()) {
 		/* We require a self-powered hub, which should have
 		 * plenty of power. */
@@ -469,7 +470,6 @@ static const struct hc_driver ohci_omap_hc_driver = {
 	 */
 	.hub_status_data =	ohci_hub_status_data,
 	.hub_control =		ohci_hub_control,
-	.hub_irq_enable =	ohci_rhsc_enable,
 #ifdef	CONFIG_PM
 	.bus_suspend =		ohci_bus_suspend,
 	.bus_resume =		ohci_bus_resume,
diff --git a/drivers/usb/host/ohci-pci.c b/drivers/usb/host/ohci-pci.c
index 4696cc912e16..a9c2ae36c7ad 100644
--- a/drivers/usb/host/ohci-pci.c
+++ b/drivers/usb/host/ohci-pci.c
@@ -18,6 +18,28 @@
 #error "This file is PCI bus glue.  CONFIG_PCI must be defined."
 #endif
 
+#include <linux/pci.h>
+#include <linux/io.h>
+
+
+/* constants used to work around PM-related transfer
+ * glitches in some AMD 700 series southbridges
+ */
+#define AB_REG_BAR	0xf0
+#define AB_INDX(addr)	((addr) + 0x00)
+#define AB_DATA(addr)	((addr) + 0x04)
+#define AX_INDXC	0X30
+#define AX_DATAC	0x34
+
+#define NB_PCIE_INDX_ADDR	0xe0
+#define NB_PCIE_INDX_DATA	0xe4
+#define PCIE_P_CNTL		0x10040
+#define BIF_NB			0x10002
+
+static struct pci_dev *amd_smbus_dev;
+static struct pci_dev *amd_hb_dev;
+static int amd_ohci_iso_count;
+
 /*-------------------------------------------------------------------------*/
 
 static int broken_suspend(struct usb_hcd *hcd)
@@ -143,6 +165,103 @@ static int ohci_quirk_nec(struct usb_hcd *hcd)
 	return 0;
 }
 
+static int ohci_quirk_amd700(struct usb_hcd *hcd)
+{
+	struct ohci_hcd *ohci = hcd_to_ohci(hcd);
+	u8 rev = 0;
+
+	if (!amd_smbus_dev)
+		amd_smbus_dev = pci_get_device(PCI_VENDOR_ID_ATI,
+				PCI_DEVICE_ID_ATI_SBX00_SMBUS, NULL);
+	if (!amd_smbus_dev)
+		return 0;
+
+	pci_read_config_byte(amd_smbus_dev, PCI_REVISION_ID, &rev);
+	if ((rev > 0x3b) || (rev < 0x30)) {
+		pci_dev_put(amd_smbus_dev);
+		amd_smbus_dev = NULL;
+		return 0;
+	}
+
+	amd_ohci_iso_count++;
+
+	if (!amd_hb_dev)
+		amd_hb_dev = pci_get_device(PCI_VENDOR_ID_AMD, 0x9600, NULL);
+
+	ohci->flags |= OHCI_QUIRK_AMD_ISO;
+	ohci_dbg(ohci, "enabled AMD ISO transfers quirk\n");
+
+	return 0;
+}
+
+/*
+ * The hardware normally enables the A-link power management feature, which
+ * lets the system lower the power consumption in idle states.
+ *
+ * Assume the system is configured to have USB 1.1 ISO transfers going
+ * to or from a USB device.  Without this quirk, that stream may stutter
+ * or have breaks occasionally.  For transfers going to speakers, this
+ * makes a very audible mess...
+ *
+ * That audio playback corruption is due to the audio stream getting
+ * interrupted occasionally when the link goes in lower power state
+ * This USB quirk prevents the link going into that lower power state
+ * during audio playback or other ISO operations.
+ */
+static void quirk_amd_pll(int on)
+{
+	u32 addr;
+	u32 val;
+	u32 bit = (on > 0) ? 1 : 0;
+
+	pci_read_config_dword(amd_smbus_dev, AB_REG_BAR, &addr);
+
+	/* BIT names/meanings are NDA-protected, sorry ... */
+
+	outl(AX_INDXC, AB_INDX(addr));
+	outl(0x40, AB_DATA(addr));
+	outl(AX_DATAC, AB_INDX(addr));
+	val = inl(AB_DATA(addr));
+	val &= ~((1 << 3) | (1 << 4) | (1 << 9));
+	val |= (bit << 3) | ((!bit) << 4) | ((!bit) << 9);
+	outl(val, AB_DATA(addr));
+
+	if (amd_hb_dev) {
+		addr = PCIE_P_CNTL;
+		pci_write_config_dword(amd_hb_dev, NB_PCIE_INDX_ADDR, addr);
+
+		pci_read_config_dword(amd_hb_dev, NB_PCIE_INDX_DATA, &val);
+		val &= ~(1 | (1 << 3) | (1 << 4) | (1 << 9) | (1 << 12));
+		val |= bit | (bit << 3) | (bit << 12);
+		val |= ((!bit) << 4) | ((!bit) << 9);
+		pci_write_config_dword(amd_hb_dev, NB_PCIE_INDX_DATA, val);
+
+		addr = BIF_NB;
+		pci_write_config_dword(amd_hb_dev, NB_PCIE_INDX_ADDR, addr);
+
+		pci_read_config_dword(amd_hb_dev, NB_PCIE_INDX_DATA, &val);
+		val &= ~(1 << 8);
+		val |= bit << 8;
+		pci_write_config_dword(amd_hb_dev, NB_PCIE_INDX_DATA, val);
+	}
+}
+
+static void amd_iso_dev_put(void)
+{
+	amd_ohci_iso_count--;
+	if (amd_ohci_iso_count == 0) {
+		if (amd_smbus_dev) {
+			pci_dev_put(amd_smbus_dev);
+			amd_smbus_dev = NULL;
+		}
+		if (amd_hb_dev) {
+			pci_dev_put(amd_hb_dev);
+			amd_hb_dev = NULL;
+		}
+	}
+
+}
+
 /* List of quirks for OHCI */
 static const struct pci_device_id ohci_pci_quirks[] = {
 	{
@@ -181,6 +300,19 @@ static const struct pci_device_id ohci_pci_quirks[] = {
 		PCI_DEVICE(PCI_VENDOR_ID_ITE, 0x8152),
 		.driver_data = (unsigned long) broken_suspend,
 	},
+	{
+		PCI_DEVICE(PCI_VENDOR_ID_ATI, 0x4397),
+		.driver_data = (unsigned long)ohci_quirk_amd700,
+	},
+	{
+		PCI_DEVICE(PCI_VENDOR_ID_ATI, 0x4398),
+		.driver_data = (unsigned long)ohci_quirk_amd700,
+	},
+	{
+		PCI_DEVICE(PCI_VENDOR_ID_ATI, 0x4399),
+		.driver_data = (unsigned long)ohci_quirk_amd700,
+	},
+
 	/* FIXME for some of the early AMD 760 southbridges, OHCI
 	 * won't work at all.  blacklist them.
 	 */
@@ -327,7 +459,6 @@ static const struct hc_driver ohci_pci_hc_driver = {
 	 */
 	.hub_status_data =	ohci_hub_status_data,
 	.hub_control =		ohci_hub_control,
-	.hub_irq_enable =	ohci_rhsc_enable,
 #ifdef	CONFIG_PM
 	.bus_suspend =		ohci_bus_suspend,
 	.bus_resume =		ohci_bus_resume,
diff --git a/drivers/usb/host/ohci-pnx4008.c b/drivers/usb/host/ohci-pnx4008.c
index 6ad8f2fc57b9..658a2a978c32 100644
--- a/drivers/usb/host/ohci-pnx4008.c
+++ b/drivers/usb/host/ohci-pnx4008.c
@@ -21,13 +21,12 @@
 #include <linux/platform_device.h>
 #include <linux/i2c.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
-#include <asm/mach-types.h>
 
-#include <asm/arch/platform.h>
-#include <asm/arch/irqs.h>
-#include <asm/arch/gpio.h>
+#include <mach/platform.h>
+#include <mach/irqs.h>
+#include <mach/gpio.h>
 
 #define USB_CTRL	IO_ADDRESS(PNX4008_PWRMAN_BASE + 0x64)
 
@@ -278,7 +277,6 @@ static const struct hc_driver ohci_pnx4008_hc_driver = {
 	 */
 	.hub_status_data = ohci_hub_status_data,
 	.hub_control = ohci_hub_control,
-	.hub_irq_enable = ohci_rhsc_enable,
 #ifdef	CONFIG_PM
 	.bus_suspend = ohci_bus_suspend,
 	.bus_resume = ohci_bus_resume,
diff --git a/drivers/usb/host/ohci-pnx8550.c b/drivers/usb/host/ohci-pnx8550.c
index 605d59cba28e..28467e288a93 100644
--- a/drivers/usb/host/ohci-pnx8550.c
+++ b/drivers/usb/host/ohci-pnx8550.c
@@ -201,7 +201,6 @@ static const struct hc_driver ohci_pnx8550_hc_driver = {
 	 */
 	.hub_status_data =	ohci_hub_status_data,
 	.hub_control =		ohci_hub_control,
-	.hub_irq_enable =	ohci_rhsc_enable,
 #ifdef	CONFIG_PM
 	.bus_suspend =		ohci_bus_suspend,
 	.bus_resume =		ohci_bus_resume,
diff --git a/drivers/usb/host/ohci-ppc-of.c b/drivers/usb/host/ohci-ppc-of.c
index 91e6e101a4cc..7ac53264ead3 100644
--- a/drivers/usb/host/ohci-ppc-of.c
+++ b/drivers/usb/host/ohci-ppc-of.c
@@ -72,7 +72,6 @@ static const struct hc_driver ohci_ppc_of_hc_driver = {
 	 */
 	.hub_status_data =	ohci_hub_status_data,
 	.hub_control =		ohci_hub_control,
-	.hub_irq_enable =	ohci_rhsc_enable,
 #ifdef	CONFIG_PM
 	.bus_suspend =		ohci_bus_suspend,
 	.bus_resume =		ohci_bus_resume,
diff --git a/drivers/usb/host/ohci-ppc-soc.c b/drivers/usb/host/ohci-ppc-soc.c
index 523c30125577..cd3398b675b2 100644
--- a/drivers/usb/host/ohci-ppc-soc.c
+++ b/drivers/usb/host/ohci-ppc-soc.c
@@ -172,7 +172,6 @@ static const struct hc_driver ohci_ppc_soc_hc_driver = {
 	 */
 	.hub_status_data =	ohci_hub_status_data,
 	.hub_control =		ohci_hub_control,
-	.hub_irq_enable =	ohci_rhsc_enable,
 #ifdef	CONFIG_PM
 	.bus_suspend =		ohci_bus_suspend,
 	.bus_resume =		ohci_bus_resume,
diff --git a/drivers/usb/host/ohci-ps3.c b/drivers/usb/host/ohci-ps3.c
index 55c95647f008..2089d8a46c4b 100644
--- a/drivers/usb/host/ohci-ps3.c
+++ b/drivers/usb/host/ohci-ps3.c
@@ -68,7 +68,6 @@ static const struct hc_driver ps3_ohci_hc_driver = {
 	.get_frame_number	= ohci_get_frame,
 	.hub_status_data	= ohci_hub_status_data,
 	.hub_control		= ohci_hub_control,
-	.hub_irq_enable		= ohci_rhsc_enable,
 	.start_port_reset	= ohci_start_port_reset,
 #if defined(CONFIG_PM)
 	.bus_suspend 		= ohci_bus_suspend,
diff --git a/drivers/usb/host/ohci-pxa27x.c b/drivers/usb/host/ohci-pxa27x.c
index 127b15799024..7f0f35c78185 100644
--- a/drivers/usb/host/ohci-pxa27x.c
+++ b/drivers/usb/host/ohci-pxa27x.c
@@ -24,11 +24,10 @@
 #include <linux/platform_device.h>
 #include <linux/clk.h>
 
-#include <asm/mach-types.h>
-#include <asm/hardware.h>
-#include <asm/arch/pxa-regs.h>
-#include <asm/arch/pxa2xx-regs.h> /* FIXME: for PSSR */
-#include <asm/arch/ohci.h>
+#include <mach/hardware.h>
+#include <mach/pxa-regs.h>
+#include <mach/pxa2xx-regs.h> /* FIXME: for PSSR */
+#include <mach/ohci.h>
 
 #define PXA_UHC_MAX_PORTNUM    3
 
@@ -299,7 +298,6 @@ static const struct hc_driver ohci_pxa27x_hc_driver = {
 	 */
 	.hub_status_data =	ohci_hub_status_data,
 	.hub_control =		ohci_hub_control,
-	.hub_irq_enable =	ohci_rhsc_enable,
 #ifdef  CONFIG_PM
 	.bus_suspend =		ohci_bus_suspend,
 	.bus_resume =		ohci_bus_resume,
diff --git a/drivers/usb/host/ohci-q.c b/drivers/usb/host/ohci-q.c
index 6a9b4c557953..c2d80f80448b 100644
--- a/drivers/usb/host/ohci-q.c
+++ b/drivers/usb/host/ohci-q.c
@@ -49,6 +49,9 @@ __acquires(ohci->lock)
 	switch (usb_pipetype (urb->pipe)) {
 	case PIPE_ISOCHRONOUS:
 		ohci_to_hcd(ohci)->self.bandwidth_isoc_reqs--;
+		if (ohci_to_hcd(ohci)->self.bandwidth_isoc_reqs == 0
+				&& quirk_amdiso(ohci))
+			quirk_amd_pll(1);
 		break;
 	case PIPE_INTERRUPT:
 		ohci_to_hcd(ohci)->self.bandwidth_int_reqs--;
@@ -677,6 +680,9 @@ static void td_submit_urb (
 				data + urb->iso_frame_desc [cnt].offset,
 				urb->iso_frame_desc [cnt].length, urb, cnt);
 		}
+		if (ohci_to_hcd(ohci)->self.bandwidth_isoc_reqs == 0
+				&& quirk_amdiso(ohci))
+			quirk_amd_pll(0);
 		periodic = ohci_to_hcd(ohci)->self.bandwidth_isoc_reqs++ == 0
 			&& ohci_to_hcd(ohci)->self.bandwidth_int_reqs == 0;
 		break;
diff --git a/drivers/usb/host/ohci-s3c2410.c b/drivers/usb/host/ohci-s3c2410.c
index 3c7a740cfe0c..f46af7a718d4 100644
--- a/drivers/usb/host/ohci-s3c2410.c
+++ b/drivers/usb/host/ohci-s3c2410.c
@@ -22,8 +22,8 @@
 #include <linux/platform_device.h>
 #include <linux/clk.h>
 
-#include <asm/hardware.h>
-#include <asm/arch/usb-control.h>
+#include <mach/hardware.h>
+#include <mach/usb-control.h>
 
 #define valid_port(idx) ((idx) == 1 || (idx) == 2)
 
@@ -466,7 +466,6 @@ static const struct hc_driver ohci_s3c2410_hc_driver = {
 	 */
 	.hub_status_data =	ohci_s3c2410_hub_status_data,
 	.hub_control =		ohci_s3c2410_hub_control,
-	.hub_irq_enable =	ohci_rhsc_enable,
 #ifdef	CONFIG_PM
 	.bus_suspend =		ohci_bus_suspend,
 	.bus_resume =		ohci_bus_resume,
diff --git a/drivers/usb/host/ohci-sa1111.c b/drivers/usb/host/ohci-sa1111.c
index 2e9dceb9bb99..e4bbe8e188e4 100644
--- a/drivers/usb/host/ohci-sa1111.c
+++ b/drivers/usb/host/ohci-sa1111.c
@@ -13,10 +13,10 @@
  * This file is licenced under the GPL.
  */
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/mach-types.h>
-#include <asm/arch/assabet.h>
-#include <asm/arch/badge4.h>
+#include <mach/assabet.h>
+#include <mach/badge4.h>
 #include <asm/hardware/sa1111.h>
 
 #ifndef CONFIG_SA1111
@@ -231,7 +231,6 @@ static const struct hc_driver ohci_sa1111_hc_driver = {
 	 */
 	.hub_status_data =	ohci_hub_status_data,
 	.hub_control =		ohci_hub_control,
-	.hub_irq_enable =	ohci_rhsc_enable,
 #ifdef	CONFIG_PM
 	.bus_suspend =		ohci_bus_suspend,
 	.bus_resume =		ohci_bus_resume,
diff --git a/drivers/usb/host/ohci-sh.c b/drivers/usb/host/ohci-sh.c
index e7ee607278fe..60f03cc7ec4f 100644
--- a/drivers/usb/host/ohci-sh.c
+++ b/drivers/usb/host/ohci-sh.c
@@ -68,7 +68,6 @@ static const struct hc_driver ohci_sh_hc_driver = {
 	 */
 	.hub_status_data =	ohci_hub_status_data,
 	.hub_control =		ohci_hub_control,
-	.hub_irq_enable =	ohci_rhsc_enable,
 #ifdef	CONFIG_PM
 	.bus_suspend =		ohci_bus_suspend,
 	.bus_resume =		ohci_bus_resume,
diff --git a/drivers/usb/host/ohci-sm501.c b/drivers/usb/host/ohci-sm501.c
index 21b164e4abeb..cff23637cfcc 100644
--- a/drivers/usb/host/ohci-sm501.c
+++ b/drivers/usb/host/ohci-sm501.c
@@ -75,7 +75,6 @@ static const struct hc_driver ohci_sm501_hc_driver = {
 	 */
 	.hub_status_data =	ohci_hub_status_data,
 	.hub_control =		ohci_hub_control,
-	.hub_irq_enable =	ohci_rhsc_enable,
 #ifdef	CONFIG_PM
 	.bus_suspend =		ohci_bus_suspend,
 	.bus_resume =		ohci_bus_resume,
diff --git a/drivers/usb/host/ohci-ssb.c b/drivers/usb/host/ohci-ssb.c
index 3660c83d80af..23fd6a886bdd 100644
--- a/drivers/usb/host/ohci-ssb.c
+++ b/drivers/usb/host/ohci-ssb.c
@@ -81,7 +81,6 @@ static const struct hc_driver ssb_ohci_hc_driver = {
 
 	.hub_status_data	= ohci_hub_status_data,
 	.hub_control		= ohci_hub_control,
-	.hub_irq_enable		= ohci_rhsc_enable,
 #ifdef	CONFIG_PM
 	.bus_suspend		= ohci_bus_suspend,
 	.bus_resume		= ohci_bus_resume,
diff --git a/drivers/usb/host/ohci.h b/drivers/usb/host/ohci.h
index dc544ddc7849..faf622eafce7 100644
--- a/drivers/usb/host/ohci.h
+++ b/drivers/usb/host/ohci.h
@@ -371,6 +371,7 @@ struct ohci_hcd {
 	 * other external transceivers should be software-transparent
 	 */
 	struct otg_transceiver	*transceiver;
+	void (*start_hnp)(struct ohci_hcd *ohci);
 
 	/*
 	 * memory management for queue data structures
@@ -399,6 +400,8 @@ struct ohci_hcd {
 #define	OHCI_QUIRK_ZFMICRO	0x20			/* Compaq ZFMicro chipset*/
 #define	OHCI_QUIRK_NEC		0x40			/* lost interrupts */
 #define	OHCI_QUIRK_FRAME_NO	0x80			/* no big endian frame_no shift */
+#define	OHCI_QUIRK_HUB_POWER	0x100			/* distrust firmware power/oc setup */
+#define	OHCI_QUIRK_AMD_ISO	0x200			/* ISO transfers*/
 	// there are also chip quirks/bugs in init logic
 
 	struct work_struct	nec_work;	/* Worker for NEC quirk */
@@ -426,6 +429,10 @@ static inline int quirk_zfmicro(struct ohci_hcd *ohci)
 {
 	return ohci->flags & OHCI_QUIRK_ZFMICRO;
 }
+static inline int quirk_amdiso(struct ohci_hcd *ohci)
+{
+	return ohci->flags & OHCI_QUIRK_AMD_ISO;
+}
 #else
 static inline int quirk_nec(struct ohci_hcd *ohci)
 {
@@ -435,6 +442,10 @@ static inline int quirk_zfmicro(struct ohci_hcd *ohci)
 {
 	return 0;
 }
+static inline int quirk_amdiso(struct ohci_hcd *ohci)
+{
+	return 0;
+}
 #endif
 
 /* convert between an hcd pointer and the corresponding ohci_hcd */
diff --git a/drivers/usb/host/r8a66597-hcd.c b/drivers/usb/host/r8a66597-hcd.c
index d5f02dddb120..ea7126f99cab 100644
--- a/drivers/usb/host/r8a66597-hcd.c
+++ b/drivers/usb/host/r8a66597-hcd.c
@@ -964,11 +964,34 @@ static void pipe_irq_disable(struct r8a66597 *r8a66597, u16 pipenum)
 	disable_irq_nrdy(r8a66597, pipenum);
 }
 
+static void r8a66597_root_hub_start_polling(struct r8a66597 *r8a66597)
+{
+	mod_timer(&r8a66597->rh_timer,
+			jiffies + msecs_to_jiffies(R8A66597_RH_POLL_TIME));
+}
+
+static void start_root_hub_sampling(struct r8a66597 *r8a66597, int port,
+					int connect)
+{
+	struct r8a66597_root_hub *rh = &r8a66597->root_hub[port];
+
+	rh->old_syssts = r8a66597_read(r8a66597, get_syssts_reg(port)) & LNST;
+	rh->scount = R8A66597_MAX_SAMPLING;
+	if (connect)
+		rh->port |= 1 << USB_PORT_FEAT_CONNECTION;
+	else
+		rh->port &= ~(1 << USB_PORT_FEAT_CONNECTION);
+	rh->port |= 1 << USB_PORT_FEAT_C_CONNECTION;
+
+	r8a66597_root_hub_start_polling(r8a66597);
+}
+
 /* this function must be called with interrupt disabled */
 static void r8a66597_check_syssts(struct r8a66597 *r8a66597, int port,
 					u16 syssts)
 {
 	if (syssts == SE0) {
+		r8a66597_write(r8a66597, ~ATTCH, get_intsts_reg(port));
 		r8a66597_bset(r8a66597, ATTCHE, get_intenb_reg(port));
 		return;
 	}
@@ -1002,13 +1025,10 @@ static void r8a66597_usb_disconnect(struct r8a66597 *r8a66597, int port)
 {
 	struct r8a66597_device *dev = r8a66597->root_hub[port].dev;
 
-	r8a66597->root_hub[port].port &= ~(1 << USB_PORT_FEAT_CONNECTION);
-	r8a66597->root_hub[port].port |= (1 << USB_PORT_FEAT_C_CONNECTION);
-
 	disable_r8a66597_pipe_all(r8a66597, dev);
 	free_usb_address(r8a66597, dev);
 
-	r8a66597_bset(r8a66597, ATTCHE, get_intenb_reg(port));
+	start_root_hub_sampling(r8a66597, port, 0);
 }
 
 /* this function must be called with interrupt disabled */
@@ -1551,23 +1571,6 @@ static void irq_pipe_nrdy(struct r8a66597 *r8a66597)
 	}
 }
 
-static void r8a66597_root_hub_start_polling(struct r8a66597 *r8a66597)
-{
-	mod_timer(&r8a66597->rh_timer,
-			jiffies + msecs_to_jiffies(R8A66597_RH_POLL_TIME));
-}
-
-static void start_root_hub_sampling(struct r8a66597 *r8a66597, int port)
-{
-	struct r8a66597_root_hub *rh = &r8a66597->root_hub[port];
-
-	rh->old_syssts = r8a66597_read(r8a66597, get_syssts_reg(port)) & LNST;
-	rh->scount = R8A66597_MAX_SAMPLING;
-	r8a66597->root_hub[port].port |= (1 << USB_PORT_FEAT_CONNECTION)
-					 | (1 << USB_PORT_FEAT_C_CONNECTION);
-	r8a66597_root_hub_start_polling(r8a66597);
-}
-
 static irqreturn_t r8a66597_irq(struct usb_hcd *hcd)
 {
 	struct r8a66597 *r8a66597 = hcd_to_r8a66597(hcd);
@@ -1594,7 +1597,7 @@ static irqreturn_t r8a66597_irq(struct usb_hcd *hcd)
 			r8a66597_bclr(r8a66597, ATTCHE, INTENB2);
 
 			/* start usb bus sampling */
-			start_root_hub_sampling(r8a66597, 1);
+			start_root_hub_sampling(r8a66597, 1, 1);
 		}
 		if (mask2 & DTCH) {
 			r8a66597_write(r8a66597, ~DTCH, INTSTS2);
@@ -1609,7 +1612,7 @@ static irqreturn_t r8a66597_irq(struct usb_hcd *hcd)
 			r8a66597_bclr(r8a66597, ATTCHE, INTENB1);
 
 			/* start usb bus sampling */
-			start_root_hub_sampling(r8a66597, 0);
+			start_root_hub_sampling(r8a66597, 0, 1);
 		}
 		if (mask1 & DTCH) {
 			r8a66597_write(r8a66597, ~DTCH, INTSTS1);
diff --git a/drivers/usb/host/sl811-hcd.c b/drivers/usb/host/sl811-hcd.c
index 340d72da554a..8a74bbb57d08 100644
--- a/drivers/usb/host/sl811-hcd.c
+++ b/drivers/usb/host/sl811-hcd.c
@@ -1026,7 +1026,7 @@ sl811h_endpoint_disable(struct usb_hcd *hcd, struct usb_host_endpoint *hep)
 	if (!list_empty(&hep->urb_list))
 		msleep(3);
 	if (!list_empty(&hep->urb_list))
-		WARN("ep %p not empty?\n", ep);
+		WARNING("ep %p not empty?\n", ep);
 
 	kfree(ep);
 	hep->hcpriv = NULL;
diff --git a/drivers/usb/host/sl811.h b/drivers/usb/host/sl811.h
index 7690d98e42a7..b6b8c1f233dd 100644
--- a/drivers/usb/host/sl811.h
+++ b/drivers/usb/host/sl811.h
@@ -261,6 +261,6 @@ sl811_read_buf(struct sl811 *sl811, int addr, void *buf, size_t count)
 #endif
 
 #define ERR(stuff...)		printk(KERN_ERR "sl811: " stuff)
-#define WARN(stuff...)		printk(KERN_WARNING "sl811: " stuff)
+#define WARNING(stuff...)	printk(KERN_WARNING "sl811: " stuff)
 #define INFO(stuff...)		printk(KERN_INFO "sl811: " stuff)
 
diff --git a/drivers/usb/host/u132-hcd.c b/drivers/usb/host/u132-hcd.c
index 20ad3c48fcb2..228f2b070f2b 100644
--- a/drivers/usb/host/u132-hcd.c
+++ b/drivers/usb/host/u132-hcd.c
@@ -2934,16 +2934,6 @@ static int u132_start_port_reset(struct usb_hcd *hcd, unsigned port_num)
 		return 0;
 }
 
-static void u132_hub_irq_enable(struct usb_hcd *hcd)
-{
-	struct u132 *u132 = hcd_to_u132(hcd);
-	if (u132->going > 1) {
-		dev_err(&u132->platform_dev->dev, "device has been removed %d\n"
-			, u132->going);
-	} else if (u132->going > 0)
-		dev_err(&u132->platform_dev->dev, "device is being removed\n");
-}
-
 
 #ifdef CONFIG_PM
 static int u132_bus_suspend(struct usb_hcd *hcd)
@@ -2995,7 +2985,6 @@ static struct hc_driver u132_hc_driver = {
 	.bus_suspend = u132_bus_suspend,
 	.bus_resume = u132_bus_resume,
 	.start_port_reset = u132_start_port_reset,
-	.hub_irq_enable = u132_hub_irq_enable,
 };
 
 /*
diff --git a/drivers/usb/misc/Kconfig b/drivers/usb/misc/Kconfig
index 001789c9a11a..4ea50e0abcbb 100644
--- a/drivers/usb/misc/Kconfig
+++ b/drivers/usb/misc/Kconfig
@@ -42,16 +42,6 @@ config USB_ADUTUX
 	  To compile this driver as a module, choose M here.  The module
 	  will be called adutux.
 
-config USB_AUERSWALD
-	tristate "USB Auerswald ISDN support"
-	depends on USB
-	help
-	  Say Y here if you want to connect an Auerswald USB ISDN Device
-	  to your computer's USB port.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called auerswald.
-
 config USB_RIO500
 	tristate "USB Diamond Rio500 support"
 	depends on USB
diff --git a/drivers/usb/misc/Makefile b/drivers/usb/misc/Makefile
index aba091cb5ec0..45b4e12afb08 100644
--- a/drivers/usb/misc/Makefile
+++ b/drivers/usb/misc/Makefile
@@ -5,7 +5,6 @@
 
 obj-$(CONFIG_USB_ADUTUX)	+= adutux.o
 obj-$(CONFIG_USB_APPLEDISPLAY)	+= appledisplay.o
-obj-$(CONFIG_USB_AUERSWALD)	+= auerswald.o
 obj-$(CONFIG_USB_BERRY_CHARGE)	+= berry_charge.o
 obj-$(CONFIG_USB_CYPRESS_CY7C63)+= cypress_cy7c63.o
 obj-$(CONFIG_USB_CYTHERM)	+= cytherm.o
diff --git a/drivers/usb/misc/auerswald.c b/drivers/usb/misc/auerswald.c
deleted file mode 100644
index d2f61d5510e7..000000000000
--- a/drivers/usb/misc/auerswald.c
+++ /dev/null
@@ -1,2152 +0,0 @@
-/*****************************************************************************/
-/*
- *      auerswald.c  --  Auerswald PBX/System Telephone usb driver.
- *
- *      Copyright (C) 2001  Wolfgang Mües (wolfgang@iksw-muees.de)
- *
- *      Very much code of this driver is borrowed from dabusb.c (Deti Fliegl)
- *      and from the USB Skeleton driver (Greg Kroah-Hartman). Thank you.
- *
- *      This program is free software; you can redistribute it and/or modify
- *      it under the terms of the GNU General Public License as published by
- *      the Free Software Foundation; either version 2 of the License, or
- *      (at your option) any later version.
- *
- *      This program is distributed in the hope that it will be useful,
- *      but WITHOUT ANY WARRANTY; without even the implied warranty of
- *      MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *      GNU General Public License for more details.
- *
- *      You should have received a copy of the GNU General Public License
- *      along with this program; if not, write to the Free Software
- *      Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
- /*****************************************************************************/
-
-/* Standard Linux module include files */
-#include <asm/uaccess.h>
-#include <asm/byteorder.h>
-#include <linux/slab.h>
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/wait.h>
-#include <linux/usb.h>
-#include <linux/mutex.h>
-
-/*-------------------------------------------------------------------*/
-/* Debug support 						     */
-#ifdef DEBUG
-#define dump( adr, len) \
-do {			\
-	unsigned int u;	\
-	printk (KERN_DEBUG); \
-	for (u = 0; u < len; u++) \
-		printk (" %02X", adr[u] & 0xFF); \
-	printk ("\n"); \
-} while (0)
-#else
-#define dump( adr, len)
-#endif
-
-/*-------------------------------------------------------------------*/
-/* Version Information */
-#define DRIVER_VERSION "0.9.11"
-#define DRIVER_AUTHOR  "Wolfgang Mües <wolfgang@iksw-muees.de>"
-#define DRIVER_DESC    "Auerswald PBX/System Telephone usb driver"
-
-/*-------------------------------------------------------------------*/
-/* Private declarations for Auerswald USB driver                     */
-
-/* Auerswald Vendor ID */
-#define ID_AUERSWALD  	0x09BF
-
-#define AUER_MINOR_BASE	112	/* auerswald driver minor number */
-
-/* we can have up to this number of device plugged in at once */
-#define AUER_MAX_DEVICES 16
-
-
-/* Number of read buffers for each device */
-#define AU_RBUFFERS     10
-
-/* Number of chain elements for each control chain */
-#define AUCH_ELEMENTS   20
-
-/* Number of retries in communication */
-#define AU_RETRIES	10
-
-/*-------------------------------------------------------------------*/
-/* vendor specific protocol                                          */
-/* Header Byte */
-#define AUH_INDIRMASK   0x80    /* mask for direct/indirect bit */
-#define AUH_DIRECT      0x00    /* data is for USB device */
-#define AUH_INDIRECT    0x80    /* USB device is relay */
-
-#define AUH_SPLITMASK   0x40    /* mask for split bit */
-#define AUH_UNSPLIT     0x00    /* data block is full-size */
-#define AUH_SPLIT       0x40    /* data block is part of a larger one,
-                                   split-byte follows */
-
-#define AUH_TYPEMASK    0x3F    /* mask for type of data transfer */
-#define AUH_TYPESIZE    0x40    /* different types */
-#define AUH_DCHANNEL    0x00    /* D channel data */
-#define AUH_B1CHANNEL   0x01    /* B1 channel transparent */
-#define AUH_B2CHANNEL   0x02    /* B2 channel transparent */
-/*                0x03..0x0F       reserved for driver internal use */
-#define AUH_COMMAND     0x10    /* Command channel */
-#define AUH_BPROT       0x11    /* Configuration block protocol */
-#define AUH_DPROTANA    0x12    /* D channel protocol analyzer */
-#define AUH_TAPI        0x13    /* telephone api data (ATD) */
-/*                0x14..0x3F       reserved for other protocols */
-#define AUH_UNASSIGNED  0xFF    /* if char device has no assigned service */
-#define AUH_FIRSTUSERCH 0x11    /* first channel which is available for driver users */
-
-#define AUH_SIZE	1 	/* Size of Header Byte */
-
-/* Split Byte. Only present if split bit in header byte set.*/
-#define AUS_STARTMASK   0x80    /* mask for first block of splitted frame */
-#define AUS_FIRST       0x80    /* first block */
-#define AUS_FOLLOW      0x00    /* following block */
-
-#define AUS_ENDMASK     0x40    /* mask for last block of splitted frame */
-#define AUS_END         0x40    /* last block */
-#define AUS_NOEND       0x00    /* not the last block */
-
-#define AUS_LENMASK     0x3F    /* mask for block length information */
-
-/* Request types */
-#define AUT_RREQ        (USB_DIR_IN  | USB_TYPE_VENDOR | USB_RECIP_OTHER)   /* Read Request */
-#define AUT_WREQ        (USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_OTHER)   /* Write Request */
-
-/* Vendor Requests */
-#define AUV_GETINFO     0x00    /* GetDeviceInfo */
-#define AUV_WBLOCK      0x01    /* Write Block */
-#define AUV_RBLOCK      0x02    /* Read Block */
-#define AUV_CHANNELCTL  0x03    /* Channel Control */
-#define AUV_DUMMY	0x04	/* Dummy Out for retry */
-
-/* Device Info Types */
-#define AUDI_NUMBCH     0x0000  /* Number of supported B channels */
-#define AUDI_OUTFSIZE   0x0001  /* Size of OUT B channel fifos */
-#define AUDI_MBCTRANS   0x0002  /* max. Blocklength of control transfer */
-
-/* Interrupt endpoint definitions */
-#define AU_IRQENDP      1       /* Endpoint number */
-#define AU_IRQCMDID     16      /* Command-block ID */
-#define AU_BLOCKRDY     0       /* Command: Block data ready on ctl endpoint */
-#define AU_IRQMINSIZE	5	/* Nr. of bytes decoded in this driver */
-
-/* Device String Descriptors */
-#define AUSI_VENDOR   	1	/* "Auerswald GmbH & Co. KG" */
-#define AUSI_DEVICE   	2	/* Name of the Device */
-#define AUSI_SERIALNR 	3	/* Serial Number */
-#define AUSI_MSN      	4	/* "MSN ..." (first) Multiple Subscriber Number */
-
-#define AUSI_DLEN	100	/* Max. Length of Device Description */
-
-#define AUV_RETRY	0x101	/* First Firmware version which can do control retries */
-
-/*-------------------------------------------------------------------*/
-/* External data structures / Interface                              */
-typedef struct
-{
-	char __user *buf;	/* return buffer for string contents */
-	unsigned int bsize;	/* size of return buffer */
-} audevinfo_t,*paudevinfo_t;
-
-/* IO controls */
-#define IOCTL_AU_SLEN	  _IOR( 'U', 0xF0, int)         /* return the max. string descriptor length */
-#define IOCTL_AU_DEVINFO  _IOWR('U', 0xF1, audevinfo_t) /* get name of a specific device */
-#define IOCTL_AU_SERVREQ  _IOW( 'U', 0xF2, int) 	/* request a service channel */
-#define IOCTL_AU_BUFLEN	  _IOR( 'U', 0xF3, int)         /* return the max. buffer length for the device */
-#define IOCTL_AU_RXAVAIL  _IOR( 'U', 0xF4, int)         /* return != 0 if Receive Data available */
-#define IOCTL_AU_CONNECT  _IOR( 'U', 0xF5, int)         /* return != 0 if connected to a service channel */
-#define IOCTL_AU_TXREADY  _IOR( 'U', 0xF6, int)         /* return != 0 if Transmitt channel ready to send */
-/*                              'U'  0xF7..0xFF reseved */
-
-/*-------------------------------------------------------------------*/
-/* Internal data structures                                          */
-
-/* ..................................................................*/
-/* urb chain element */
-struct  auerchain;                      /* forward for circular reference */
-typedef struct
-{
-        struct auerchain *chain;        /* pointer to the chain to which this element belongs */
-        struct urb * urbp;                   /* pointer to attached urb */
-        void *context;                  /* saved URB context */
-        usb_complete_t complete;        /* saved URB completion function */
-        struct list_head list;          /* to include element into a list */
-} auerchainelement_t,*pauerchainelement_t;
-
-/* urb chain */
-typedef struct auerchain
-{
-        pauerchainelement_t active;     /* element which is submitted to urb */
-	spinlock_t lock;                /* protection agains interrupts */
-        struct list_head waiting_list;  /* list of waiting elements */
-        struct list_head free_list;     /* list of available elements */
-} auerchain_t,*pauerchain_t;
-
-/* urb blocking completion helper struct */
-typedef struct
-{
-	wait_queue_head_t wqh;    	/* wait for completion */
-	unsigned int done;		/* completion flag */
-} auerchain_chs_t,*pauerchain_chs_t;
-
-/* ...................................................................*/
-/* buffer element */
-struct  auerbufctl;                     /* forward */
-typedef struct
-{
-        char *bufp;                     /* reference to allocated data buffer */
-        unsigned int len;               /* number of characters in data buffer */
-	unsigned int retries;		/* for urb retries */
-        struct usb_ctrlrequest *dr;	/* for setup data in control messages */
-        struct urb * urbp;                   /* USB urb */
-        struct auerbufctl *list;        /* pointer to list */
-        struct list_head buff_list;     /* reference to next buffer in list */
-} auerbuf_t,*pauerbuf_t;
-
-/* buffer list control block */
-typedef struct auerbufctl
-{
-        spinlock_t lock;                /* protection in interrupt */
-        struct list_head free_buff_list;/* free buffers */
-        struct list_head rec_buff_list; /* buffers with receive data */
-} auerbufctl_t,*pauerbufctl_t;
-
-/* ...................................................................*/
-/* service context */
-struct  auerscon;                       /* forward */
-typedef void (*auer_dispatch_t)(struct auerscon*, pauerbuf_t);
-typedef void (*auer_disconn_t) (struct auerscon*);
-typedef struct auerscon
-{
-        unsigned int id;                /* protocol service id AUH_xxxx */
-        auer_dispatch_t dispatch;       /* dispatch read buffer */
-	auer_disconn_t disconnect;	/* disconnect from device, wake up all char readers */
-} auerscon_t,*pauerscon_t;
-
-/* ...................................................................*/
-/* USB device context */
-typedef struct
-{
-	struct mutex 	mutex;         	    /* protection in user context */
-	char 			name[20];	    /* name of the /dev/usb entry */
-	unsigned int		dtindex;	    /* index in the device table */
-	struct usb_device *	usbdev;      	    /* USB device handle */
-	int			open_count;	    /* count the number of open character channels */
-        char 			dev_desc[AUSI_DLEN];/* for storing a textual description */
-        unsigned int 		maxControlLength;   /* max. Length of control paket (without header) */
-        struct urb * 		inturbp;            /* interrupt urb */
-        char *			intbufp;            /* data buffer for interrupt urb */
-	unsigned int 		irqsize;	    /* size of interrupt endpoint 1 */
-        struct auerchain 	controlchain;  	    /* for chaining of control messages */
-	auerbufctl_t 		bufctl;             /* Buffer control for control transfers */
-        pauerscon_t 	     	services[AUH_TYPESIZE];/* context pointers for each service */
-	unsigned int		version;	    /* Version of the device */
-	wait_queue_head_t 	bufferwait;         /* wait for a control buffer */
-} auerswald_t,*pauerswald_t;
-
-/* ................................................................... */
-/* character device context */
-typedef struct
-{
-	struct mutex mutex;		/* protection in user context */
-	pauerswald_t auerdev;           /* context pointer of assigned device */
-        auerbufctl_t bufctl;            /* controls the buffer chain */
-        auerscon_t scontext;            /* service context */
-	wait_queue_head_t readwait;     /* for synchronous reading */
-	struct mutex readmutex;		/* protection against multiple reads */
-	pauerbuf_t readbuf;		/* buffer held for partial reading */
-	unsigned int readoffset;	/* current offset in readbuf */
-	unsigned int removed;		/* is != 0 if device is removed */
-} auerchar_t,*pauerchar_t;
-
-
-/*-------------------------------------------------------------------*/
-/* Forwards */
-static void auerswald_ctrlread_complete (struct urb * urb);
-static void auerswald_removeservice (pauerswald_t cp, pauerscon_t scp);
-static struct usb_driver auerswald_driver;
-
-
-/*-------------------------------------------------------------------*/
-/* USB chain helper functions                                        */
-/* --------------------------                                        */
-
-/* completion function for chained urbs */
-static void auerchain_complete (struct urb * urb)
-{
-	unsigned long flags;
-        int result;
-
-        /* get pointer to element and to chain */
-	pauerchainelement_t acep = urb->context;
-        pauerchain_t         acp = acep->chain;
-
-        /* restore original entries in urb */
-        urb->context  = acep->context;
-        urb->complete = acep->complete;
-
-        dbg ("auerchain_complete called");
-
-        /* call original completion function
-           NOTE: this function may lead to more urbs submitted into the chain.
-                 (no chain lock at calling complete()!)
-                 acp->active != NULL is protecting us against recursion.*/
-        urb->complete (urb);
-
-        /* detach element from chain data structure */
-	spin_lock_irqsave (&acp->lock, flags);
-        if (acp->active != acep) /* paranoia debug check */
-	        dbg ("auerchain_complete: completion on non-active element called!");
-        else
-                acp->active = NULL;
-
-        /* add the used chain element to the list of free elements */
-	list_add_tail (&acep->list, &acp->free_list);
-        acep = NULL;
-
-        /* is there a new element waiting in the chain? */
-        if (!acp->active && !list_empty (&acp->waiting_list)) {
-                /* yes: get the entry */
-                struct list_head *tmp = acp->waiting_list.next;
-                list_del (tmp);
-                acep = list_entry (tmp, auerchainelement_t, list);
-                acp->active = acep;
-        }
-        spin_unlock_irqrestore (&acp->lock, flags);
-
-        /* submit the new urb */
-        if (acep) {
-                urb    = acep->urbp;
-                dbg ("auerchain_complete: submitting next urb from chain");
-		urb->status = 0;	/* needed! */
-		result = usb_submit_urb(urb, GFP_ATOMIC);
-
-                /* check for submit errors */
-                if (result) {
-                        urb->status = result;
-                        dbg("auerchain_complete: usb_submit_urb with error code %d", result);
-                        /* and do error handling via *this* completion function (recursive) */
-                        auerchain_complete( urb);
-                }
-        } else {
-                /* simple return without submitting a new urb.
-                   The empty chain is detected with acp->active == NULL. */
-        };
-}
-
-
-/* submit function for chained urbs
-   this function may be called from completion context or from user space!
-   early = 1 -> submit in front of chain
-*/
-static int auerchain_submit_urb_list (pauerchain_t acp, struct urb * urb, int early)
-{
-        int result;
-        unsigned long flags;
-        pauerchainelement_t acep = NULL;
-
-        dbg ("auerchain_submit_urb called");
-
-        /* try to get a chain element */
-        spin_lock_irqsave (&acp->lock, flags);
-        if (!list_empty (&acp->free_list)) {
-                /* yes: get the entry */
-                struct list_head *tmp = acp->free_list.next;
-                list_del (tmp);
-                acep = list_entry (tmp, auerchainelement_t, list);
-        }
-        spin_unlock_irqrestore (&acp->lock, flags);
-
-        /* if no chain element available: return with error */
-        if (!acep) {
-                return -ENOMEM;
-        }
-
-        /* fill in the new chain element values */
-        acep->chain    = acp;
-        acep->context  = urb->context;
-        acep->complete = urb->complete;
-        acep->urbp     = urb;
-        INIT_LIST_HEAD (&acep->list);
-
-        /* modify urb */
-        urb->context   = acep;
-        urb->complete  = auerchain_complete;
-        urb->status    = -EINPROGRESS;    /* usb_submit_urb does this, too */
-
-        /* add element to chain - or start it immediately */
-        spin_lock_irqsave (&acp->lock, flags);
-        if (acp->active) {
-                /* there is traffic in the chain, simple add element to chain */
-		if (early) {
-			dbg ("adding new urb to head of chain");
-			list_add (&acep->list, &acp->waiting_list);
-		} else {
-			dbg ("adding new urb to end of chain");
-			list_add_tail (&acep->list, &acp->waiting_list);
-		}
-		acep = NULL;
-        } else {
-                /* the chain is empty. Prepare restart */
-                acp->active = acep;
-        }
-        /* Spin has to be removed before usb_submit_urb! */
-        spin_unlock_irqrestore (&acp->lock, flags);
-
-        /* Submit urb if immediate restart */
-        if (acep) {
-                dbg("submitting urb immediate");
-		urb->status = 0;	/* needed! */
-                result = usb_submit_urb(urb, GFP_ATOMIC);
-                /* check for submit errors */
-                if (result) {
-                        urb->status = result;
-                        dbg("auerchain_submit_urb: usb_submit_urb with error code %d", result);
-                        /* and do error handling via completion function */
-                        auerchain_complete( urb);
-                }
-        }
-
-        return 0;
-}
-
-/* submit function for chained urbs
-   this function may be called from completion context or from user space!
-*/
-static int auerchain_submit_urb (pauerchain_t acp, struct urb * urb)
-{
-	return auerchain_submit_urb_list (acp, urb, 0);
-}
-
-/* cancel an urb which is submitted to the chain
-   the result is 0 if the urb is cancelled, or -EINPROGRESS if
-   the function is successfully started.
-*/
-static int auerchain_unlink_urb (pauerchain_t acp, struct urb * urb)
-{
-	unsigned long flags;
-        struct urb * urbp;
-        pauerchainelement_t acep;
-        struct list_head *tmp;
-
-        dbg ("auerchain_unlink_urb called");
-
-        /* search the chain of waiting elements */
-        spin_lock_irqsave (&acp->lock, flags);
-        list_for_each (tmp, &acp->waiting_list) {
-                acep = list_entry (tmp, auerchainelement_t, list);
-                if (acep->urbp == urb) {
-                        list_del (tmp);
-                        urb->context = acep->context;
-                        urb->complete = acep->complete;
-                        list_add_tail (&acep->list, &acp->free_list);
-                        spin_unlock_irqrestore (&acp->lock, flags);
-                        dbg ("unlink waiting urb");
-                        urb->status = -ENOENT;
-                        urb->complete (urb);
-                        return 0;
-                }
-        }
-        /* not found. */
-        spin_unlock_irqrestore (&acp->lock, flags);
-
-        /* get the active urb */
-        acep = acp->active;
-        if (acep) {
-                urbp = acep->urbp;
-
-                /* check if we have to cancel the active urb */
-                if (urbp == urb) {
-                        /* note that there is a race condition between the check above
-                           and the unlink() call because of no lock. This race is harmless,
-                           because the usb module will detect the unlink() after completion.
-                           We can't use the acp->lock here because the completion function
-                           wants to grab it.
-			*/
-                        dbg ("unlink active urb");
-                        return usb_unlink_urb (urbp);
-                }
-        }
-
-        /* not found anyway
-           ... is some kind of success
-	*/
-        dbg ("urb to unlink not found in chain");
-        return 0;
-}
-
-/* cancel all urbs which are in the chain.
-   this function must not be called from interrupt or completion handler.
-*/
-static void auerchain_unlink_all (pauerchain_t acp)
-{
-	unsigned long flags;
-        struct urb * urbp;
-        pauerchainelement_t acep;
-
-        dbg ("auerchain_unlink_all called");
-
-        /* clear the chain of waiting elements */
-        spin_lock_irqsave (&acp->lock, flags);
-        while (!list_empty (&acp->waiting_list)) {
-                /* get the next entry */
-                struct list_head *tmp = acp->waiting_list.next;
-                list_del (tmp);
-                acep = list_entry (tmp, auerchainelement_t, list);
-                urbp = acep->urbp;
-                urbp->context = acep->context;
-                urbp->complete = acep->complete;
-                list_add_tail (&acep->list, &acp->free_list);
-                spin_unlock_irqrestore (&acp->lock, flags);
-                dbg ("unlink waiting urb");
-                urbp->status = -ENOENT;
-                urbp->complete (urbp);
-                spin_lock_irqsave (&acp->lock, flags);
-        }
-        spin_unlock_irqrestore (&acp->lock, flags);
-
-        /* clear the active urb */
-        acep = acp->active;
-        if (acep) {
-                urbp = acep->urbp;
-                dbg ("unlink active urb");
-                usb_kill_urb (urbp);
-        }
-}
-
-
-/* free the chain.
-   this function must not be called from interrupt or completion handler.
-*/
-static void auerchain_free (pauerchain_t acp)
-{
-	unsigned long flags;
-        pauerchainelement_t acep;
-
-        dbg ("auerchain_free called");
-
-        /* first, cancel all pending urbs */
-        auerchain_unlink_all (acp);
-
-        /* free the elements */
-        spin_lock_irqsave (&acp->lock, flags);
-        while (!list_empty (&acp->free_list)) {
-                /* get the next entry */
-                struct list_head *tmp = acp->free_list.next;
-                list_del (tmp);
-                spin_unlock_irqrestore (&acp->lock, flags);
-		acep = list_entry (tmp, auerchainelement_t, list);
-                kfree (acep);
-	        spin_lock_irqsave (&acp->lock, flags);
-	}
-        spin_unlock_irqrestore (&acp->lock, flags);
-}
-
-
-/* Init the chain control structure */
-static void auerchain_init (pauerchain_t acp)
-{
-        /* init the chain data structure */
-        acp->active = NULL;
-	spin_lock_init (&acp->lock);
-        INIT_LIST_HEAD (&acp->waiting_list);
-        INIT_LIST_HEAD (&acp->free_list);
-}
-
-/* setup a chain.
-   It is assumed that there is no concurrency while setting up the chain
-   requirement: auerchain_init()
-*/
-static int auerchain_setup (pauerchain_t acp, unsigned int numElements)
-{
-        pauerchainelement_t acep;
-
-        dbg ("auerchain_setup called with %d elements", numElements);
-
-        /* fill the list of free elements */
-        for (;numElements; numElements--) {
-                acep = kzalloc(sizeof(auerchainelement_t), GFP_KERNEL);
-                if (!acep)
-			goto ac_fail;
-                INIT_LIST_HEAD (&acep->list);
-                list_add_tail (&acep->list, &acp->free_list);
-        }
-        return 0;
-
-ac_fail:/* free the elements */
-        while (!list_empty (&acp->free_list)) {
-                /* get the next entry */
-                struct list_head *tmp = acp->free_list.next;
-                list_del (tmp);
-                acep = list_entry (tmp, auerchainelement_t, list);
-                kfree (acep);
-        }
-        return -ENOMEM;
-}
-
-
-/* completion handler for synchronous chained URBs */
-static void auerchain_blocking_completion (struct urb *urb)
-{
-	pauerchain_chs_t pchs = urb->context;
-	pchs->done = 1;
-	wmb();
-	wake_up (&pchs->wqh);
-}
-
-
-/* Starts chained urb and waits for completion or timeout */
-static int auerchain_start_wait_urb (pauerchain_t acp, struct urb *urb, int timeout, int* actual_length)
-{
-	auerchain_chs_t chs;
-	int status;
-
-	dbg ("auerchain_start_wait_urb called");
-	init_waitqueue_head (&chs.wqh);
-	chs.done = 0;
-
-	urb->context = &chs;
-	status = auerchain_submit_urb (acp, urb);
-	if (status)
-		/* something went wrong */
-		return status;
-
-	timeout = wait_event_timeout(chs.wqh, chs.done, timeout);
-
-	if (!timeout && !chs.done) {
-		if (urb->status != -EINPROGRESS) {	/* No callback?!! */
-			dbg ("auerchain_start_wait_urb: raced timeout");
-			status = urb->status;
-		} else {
-			dbg ("auerchain_start_wait_urb: timeout");
-			auerchain_unlink_urb (acp, urb);  /* remove urb safely */
-			status = -ETIMEDOUT;
-		}
-	} else
-		status = urb->status;
-
-	if (status >= 0)
-		*actual_length = urb->actual_length;
-
-  	return status;
-}
-
-
-/* auerchain_control_msg - Builds a control urb, sends it off and waits for completion
-   acp: pointer to the auerchain
-   dev: pointer to the usb device to send the message to
-   pipe: endpoint "pipe" to send the message to
-   request: USB message request value
-   requesttype: USB message request type value
-   value: USB message value
-   index: USB message index value
-   data: pointer to the data to send
-   size: length in bytes of the data to send
-   timeout: time to wait for the message to complete before timing out (if 0 the wait is forever)
-
-   This function sends a simple control message to a specified endpoint
-   and waits for the message to complete, or timeout.
-
-   If successful, it returns the transferred length, otherwise a negative error number.
-
-   Don't use this function from within an interrupt context, like a
-   bottom half handler.  If you need an asynchronous message, or need to send
-   a message from within interrupt context, use auerchain_submit_urb()
-*/
-static int auerchain_control_msg (pauerchain_t acp, struct usb_device *dev, unsigned int pipe, __u8 request, __u8 requesttype,
-			          __u16 value, __u16 index, void *data, __u16 size, int timeout)
-{
-	int ret;
-	struct usb_ctrlrequest *dr;
-	struct urb *urb;
-        int uninitialized_var(length);
-
-        dbg ("auerchain_control_msg");
-        dr = kmalloc (sizeof (struct usb_ctrlrequest), GFP_KERNEL);
-	if (!dr)
-		return -ENOMEM;
-	urb = usb_alloc_urb (0, GFP_KERNEL);
-	if (!urb) {
-        	kfree (dr);
-		return -ENOMEM;
-        }
-
-	dr->bRequestType = requesttype;
-	dr->bRequest = request;
-	dr->wValue  = cpu_to_le16 (value);
-	dr->wIndex  = cpu_to_le16 (index);
-	dr->wLength = cpu_to_le16 (size);
-
-	usb_fill_control_urb (urb, dev, pipe, (unsigned char*)dr, data, size,    /* build urb */
-		          auerchain_blocking_completion, NULL);
-	ret = auerchain_start_wait_urb (acp, urb, timeout, &length);
-
-	usb_free_urb (urb);
-	kfree (dr);
-
-        if (ret < 0)
-		return ret;
-	else
-		return length;
-}
-
-
-/*-------------------------------------------------------------------*/
-/* Buffer List helper functions                                      */
-
-/* free a single auerbuf */
-static void auerbuf_free (pauerbuf_t bp)
-{
-	kfree(bp->bufp);
-	kfree(bp->dr);
-	usb_free_urb(bp->urbp);
-	kfree(bp);
-}
-
-/* free the buffers from an auerbuf list */
-static void auerbuf_free_list (struct list_head *q)
-{
-        struct list_head *tmp;
-	struct list_head *p;
-	pauerbuf_t bp;
-
-	dbg ("auerbuf_free_list");
-	for (p = q->next; p != q;) {
-		bp = list_entry (p, auerbuf_t, buff_list);
-		tmp = p->next;
-		list_del (p);
-		p = tmp;
-		auerbuf_free (bp);
-	}
-}
-
-/* init the members of a list control block */
-static void auerbuf_init (pauerbufctl_t bcp)
-{
-	dbg ("auerbuf_init");
-	spin_lock_init (&bcp->lock);
-        INIT_LIST_HEAD (&bcp->free_buff_list);
-        INIT_LIST_HEAD (&bcp->rec_buff_list);
-}
-
-/* free all buffers from an auerbuf chain */
-static void auerbuf_free_buffers (pauerbufctl_t bcp)
-{
-	unsigned long flags;
-	dbg ("auerbuf_free_buffers");
-
-        spin_lock_irqsave (&bcp->lock, flags);
-
-	auerbuf_free_list (&bcp->free_buff_list);
-	auerbuf_free_list (&bcp->rec_buff_list);
-
-        spin_unlock_irqrestore (&bcp->lock, flags);
-}
-
-/* setup a list of buffers */
-/* requirement: auerbuf_init() */
-static int auerbuf_setup (pauerbufctl_t bcp, unsigned int numElements, unsigned int bufsize)
-{
-        pauerbuf_t bep = NULL;
-
-        dbg ("auerbuf_setup called with %d elements of %d bytes", numElements, bufsize);
-
-        /* fill the list of free elements */
-        for (;numElements; numElements--) {
-                bep = kzalloc(sizeof(auerbuf_t), GFP_KERNEL);
-                if (!bep)
-			goto bl_fail;
-                bep->list = bcp;
-                INIT_LIST_HEAD (&bep->buff_list);
-                bep->bufp = kmalloc (bufsize, GFP_KERNEL);
-                if (!bep->bufp)
-			goto bl_fail;
-                bep->dr = kmalloc(sizeof (struct usb_ctrlrequest), GFP_KERNEL);
-                if (!bep->dr)
-			goto bl_fail;
-                bep->urbp = usb_alloc_urb (0, GFP_KERNEL);
-                if (!bep->urbp)
-			goto bl_fail;
-                list_add_tail (&bep->buff_list, &bcp->free_buff_list);
-        }
-        return 0;
-
-bl_fail:/* not enough memory. Free allocated elements */
-        dbg ("auerbuf_setup: no more memory");
-	auerbuf_free(bep);
-        auerbuf_free_buffers (bcp);
-        return -ENOMEM;
-}
-
-/* insert a used buffer into the free list */
-static void auerbuf_releasebuf( pauerbuf_t bp)
-{
-        unsigned long flags;
-        pauerbufctl_t bcp = bp->list;
-	bp->retries = 0;
-
-        dbg ("auerbuf_releasebuf called");
-        spin_lock_irqsave (&bcp->lock, flags);
-	list_add_tail (&bp->buff_list, &bcp->free_buff_list);
-        spin_unlock_irqrestore (&bcp->lock, flags);
-}
-
-
-/*-------------------------------------------------------------------*/
-/* Completion handlers */
-
-/* Values of urb->status or results of usb_submit_urb():
-0		Initial, OK
--EINPROGRESS	during submission until end
--ENOENT		if urb is unlinked
--ETIME		Device did not respond
--ENOMEM		Memory Overflow
--ENODEV		Specified USB-device or bus doesn't exist
--ENXIO		URB already queued
--EINVAL		a) Invalid transfer type specified (or not supported)
-		b) Invalid interrupt interval (0n256)
--EAGAIN		a) Specified ISO start frame too early
-		b) (using ISO-ASAP) Too much scheduled for the future wait some time and try again.
--EFBIG		Too much ISO frames requested (currently uhci900)
--EPIPE		Specified pipe-handle/Endpoint is already stalled
--EMSGSIZE	Endpoint message size is zero, do interface/alternate setting
--EPROTO		a) Bitstuff error
-		b) Unknown USB error
--EILSEQ		CRC mismatch
--ENOSR		Buffer error
--EREMOTEIO	Short packet detected
--EXDEV		ISO transfer only partially completed look at individual frame status for details
--EINVAL		ISO madness, if this happens: Log off and go home
--EOVERFLOW	babble
-*/
-
-/* check if a status code allows a retry */
-static int auerswald_status_retry (int status)
-{
-	switch (status) {
-	case 0:
-	case -ETIME:
-	case -EOVERFLOW:
-	case -EAGAIN:
-	case -EPIPE:
-	case -EPROTO:
-	case -EILSEQ:
-	case -ENOSR:
-	case -EREMOTEIO:
-		return 1; /* do a retry */
-	}
-	return 0;	/* no retry possible */
-}
-
-/* Completion of asynchronous write block */
-static void auerchar_ctrlwrite_complete (struct urb * urb)
-{
-	pauerbuf_t bp =  urb->context;
-	pauerswald_t cp = ((pauerswald_t)((char *)(bp->list)-(unsigned long)(&((pauerswald_t)0)->bufctl)));
-	dbg ("auerchar_ctrlwrite_complete called");
-
-	/* reuse the buffer */
-	auerbuf_releasebuf (bp);
-	/* Wake up all processes waiting for a buffer */
-	wake_up (&cp->bufferwait);
-}
-
-/* Completion handler for dummy retry packet */
-static void auerswald_ctrlread_wretcomplete (struct urb * urb)
-{
-	pauerbuf_t bp = urb->context;
-        pauerswald_t cp;
-	int ret;
-	int status = urb->status;
-
-        dbg ("auerswald_ctrlread_wretcomplete called");
-        dbg ("complete with status: %d", status);
-	cp = ((pauerswald_t)((char *)(bp->list)-(unsigned long)(&((pauerswald_t)0)->bufctl)));
-
-	/* check if it is possible to advance */
-	if (!auerswald_status_retry(status) || !cp->usbdev) {
-		/* reuse the buffer */
-		err ("control dummy: transmission error %d, can not retry", status);
-		auerbuf_releasebuf (bp);
-		/* Wake up all processes waiting for a buffer */
-		wake_up (&cp->bufferwait);
-		return;
-	}
-
-	/* fill the control message */
-	bp->dr->bRequestType = AUT_RREQ;
-	bp->dr->bRequest     = AUV_RBLOCK;
-	bp->dr->wLength      = bp->dr->wValue;	/* temporary stored */
-	bp->dr->wValue       = cpu_to_le16 (1);	/* Retry Flag */
-	/* bp->dr->index    = channel id;          remains */
-	usb_fill_control_urb (bp->urbp, cp->usbdev, usb_rcvctrlpipe (cp->usbdev, 0),
-                          (unsigned char*)bp->dr, bp->bufp, le16_to_cpu (bp->dr->wLength),
-		          auerswald_ctrlread_complete,bp);
-
-	/* submit the control msg as next paket */
-	ret = auerchain_submit_urb_list (&cp->controlchain, bp->urbp, 1);
-        if (ret) {
-        	dbg ("auerswald_ctrlread_complete: nonzero result of auerchain_submit_urb_list %d", ret);
-        	bp->urbp->status = ret;
-        	auerswald_ctrlread_complete (bp->urbp);
-    	}
-}
-
-/* completion handler for receiving of control messages */
-static void auerswald_ctrlread_complete (struct urb * urb)
-{
-        unsigned int  serviceid;
-        pauerswald_t  cp;
-        pauerscon_t   scp;
-	pauerbuf_t bp = urb->context;
-	int status = urb->status;
-	int ret;
-
-        dbg ("auerswald_ctrlread_complete called");
-
-	cp = ((pauerswald_t)((char *)(bp->list)-(unsigned long)(&((pauerswald_t)0)->bufctl)));
-
-	/* check if there is valid data in this urb */
-        if (status) {
-		dbg ("complete with non-zero status: %d", status);
-		/* should we do a retry? */
-		if (!auerswald_status_retry(status)
-		 || !cp->usbdev
-		 || (cp->version < AUV_RETRY)
-                 || (bp->retries >= AU_RETRIES)) {
-			/* reuse the buffer */
-			err ("control read: transmission error %d, can not retry", status);
-			auerbuf_releasebuf (bp);
-			/* Wake up all processes waiting for a buffer */
-			wake_up (&cp->bufferwait);
-			return;
-		}
-		bp->retries++;
-		dbg ("Retry count = %d", bp->retries);
-		/* send a long dummy control-write-message to allow device firmware to react */
-		bp->dr->bRequestType = AUT_WREQ;
-		bp->dr->bRequest     = AUV_DUMMY;
-		bp->dr->wValue       = bp->dr->wLength; /* temporary storage */
-		// bp->dr->wIndex    channel ID remains
-		bp->dr->wLength      = cpu_to_le16 (32); /* >= 8 bytes */
-		usb_fill_control_urb (bp->urbp, cp->usbdev, usb_sndctrlpipe (cp->usbdev, 0),
-  			(unsigned char*)bp->dr, bp->bufp, 32,
-	   		auerswald_ctrlread_wretcomplete,bp);
-
-		/* submit the control msg as next paket */
-       		ret = auerchain_submit_urb_list (&cp->controlchain, bp->urbp, 1);
-       		if (ret) {
-               		dbg ("auerswald_ctrlread_complete: nonzero result of auerchain_submit_urb_list %d", ret);
-               		bp->urbp->status = ret;
-               		auerswald_ctrlread_wretcomplete (bp->urbp);
-		}
-                return;
-        }
-
-        /* get the actual bytecount (incl. headerbyte) */
-        bp->len = urb->actual_length;
-        serviceid = bp->bufp[0] & AUH_TYPEMASK;
-        dbg ("Paket with serviceid %d and %d bytes received", serviceid, bp->len);
-
-        /* dispatch the paket */
-        scp = cp->services[serviceid];
-        if (scp) {
-                /* look, Ma, a listener! */
-                scp->dispatch (scp, bp);
-        }
-
-        /* release the paket */
-        auerbuf_releasebuf (bp);
-	/* Wake up all processes waiting for a buffer */
-	wake_up (&cp->bufferwait);
-}
-
-/*-------------------------------------------------------------------*/
-/* Handling of Interrupt Endpoint                                    */
-/* This interrupt Endpoint is used to inform the host about waiting
-   messages from the USB device.
-*/
-/* int completion handler. */
-static void auerswald_int_complete (struct urb * urb)
-{
-        unsigned long flags;
-        unsigned  int channelid;
-        unsigned  int bytecount;
-        int ret;
-	int status = urb->status;
-        pauerbuf_t   bp = NULL;
-	pauerswald_t cp = urb->context;
-
-        dbg ("%s called", __func__);
-
-	switch (status) {
-	case 0:
-		/* success */
-		break;
-	case -ECONNRESET:
-	case -ENOENT:
-	case -ESHUTDOWN:
-		/* this urb is terminated, clean up */
-		dbg("%s - urb shutting down with status: %d", __func__, status);
-		return;
-	default:
-		dbg("%s - nonzero urb status received: %d", __func__, status);
-		goto exit;
-	}
-
-        /* check if all needed data was received */
-	if (urb->actual_length < AU_IRQMINSIZE) {
-                dbg ("invalid data length received: %d bytes", urb->actual_length);
-		goto exit;
-        }
-
-        /* check the command code */
-        if (cp->intbufp[0] != AU_IRQCMDID) {
-                dbg ("invalid command received: %d", cp->intbufp[0]);
-		goto exit;
-        }
-
-        /* check the command type */
-        if (cp->intbufp[1] != AU_BLOCKRDY) {
-                dbg ("invalid command type received: %d", cp->intbufp[1]);
-		goto exit;
-        }
-
-        /* now extract the information */
-        channelid = cp->intbufp[2];
-        bytecount = (unsigned char)cp->intbufp[3];
-        bytecount |= (unsigned char)cp->intbufp[4] << 8;
-
-        /* check the channel id */
-        if (channelid >= AUH_TYPESIZE) {
-                dbg ("invalid channel id received: %d", channelid);
-		goto exit;
-        }
-
-        /* check the byte count */
-        if (bytecount > (cp->maxControlLength+AUH_SIZE)) {
-                dbg ("invalid byte count received: %d", bytecount);
-		goto exit;
-        }
-        dbg ("Service Channel = %d", channelid);
-        dbg ("Byte Count = %d", bytecount);
-
-        /* get a buffer for the next data paket */
-        spin_lock_irqsave (&cp->bufctl.lock, flags);
-        if (!list_empty (&cp->bufctl.free_buff_list)) {
-                /* yes: get the entry */
-                struct list_head *tmp = cp->bufctl.free_buff_list.next;
-                list_del (tmp);
-                bp = list_entry (tmp, auerbuf_t, buff_list);
-        }
-        spin_unlock_irqrestore (&cp->bufctl.lock, flags);
-
-        /* if no buffer available: skip it */
-        if (!bp) {
-                dbg ("auerswald_int_complete: no data buffer available");
-                /* can we do something more?
-		   This is a big problem: if this int packet is ignored, the
-		   device will wait forever and not signal any more data.
-		   The only real solution is: having enough buffers!
-		   Or perhaps temporary disabling the int endpoint?
-		*/
-		goto exit;
-        }
-
-	/* fill the control message */
-        bp->dr->bRequestType = AUT_RREQ;
-	bp->dr->bRequest     = AUV_RBLOCK;
-	bp->dr->wValue       = cpu_to_le16 (0);
-	bp->dr->wIndex       = cpu_to_le16 (channelid | AUH_DIRECT | AUH_UNSPLIT);
-	bp->dr->wLength      = cpu_to_le16 (bytecount);
-	usb_fill_control_urb (bp->urbp, cp->usbdev, usb_rcvctrlpipe (cp->usbdev, 0),
-                          (unsigned char*)bp->dr, bp->bufp, bytecount,
-		          auerswald_ctrlread_complete,bp);
-
-        /* submit the control msg */
-        ret = auerchain_submit_urb (&cp->controlchain, bp->urbp);
-        if (ret) {
-                dbg ("auerswald_int_complete: nonzero result of auerchain_submit_urb %d", ret);
-                bp->urbp->status = ret;
-                auerswald_ctrlread_complete( bp->urbp);
-		/* here applies the same problem as above: device locking! */
-        }
-exit:
-	ret = usb_submit_urb (urb, GFP_ATOMIC);
-	if (ret)
-		err ("%s - usb_submit_urb failed with result %d",
-		     __func__, ret);
-}
-
-/* int memory deallocation
-   NOTE: no mutex please!
-*/
-static void auerswald_int_free (pauerswald_t cp)
-{
-	if (cp->inturbp) {
-		usb_free_urb(cp->inturbp);
-		cp->inturbp = NULL;
-	}
-	kfree(cp->intbufp);
-	cp->intbufp = NULL;
-}
-
-/* This function is called to activate the interrupt
-   endpoint. This function returns 0 if successful or an error code.
-   NOTE: no mutex please!
-*/
-static int auerswald_int_open (pauerswald_t cp)
-{
-        int ret;
-	struct usb_host_endpoint *ep;
-	int irqsize;
-	dbg ("auerswald_int_open");
-
-	ep = cp->usbdev->ep_in[AU_IRQENDP];
-	if (!ep) {
-		ret = -EFAULT;
-  		goto intoend;
-    	}
-	irqsize = le16_to_cpu(ep->desc.wMaxPacketSize);
-	cp->irqsize = irqsize;
-
-	/* allocate the urb and data buffer */
-        if (!cp->inturbp) {
-                cp->inturbp = usb_alloc_urb (0, GFP_KERNEL);
-                if (!cp->inturbp) {
-                        ret = -ENOMEM;
-                        goto intoend;
-                }
-        }
-        if (!cp->intbufp) {
-                cp->intbufp = kmalloc (irqsize, GFP_KERNEL);
-                if (!cp->intbufp) {
-                        ret = -ENOMEM;
-                        goto intoend;
-                }
-        }
-        /* setup urb */
-        usb_fill_int_urb (cp->inturbp, cp->usbdev,
-			usb_rcvintpipe (cp->usbdev,AU_IRQENDP), cp->intbufp,
-			irqsize, auerswald_int_complete, cp, ep->desc.bInterval);
-        /* start the urb */
-	cp->inturbp->status = 0;	/* needed! */
-	ret = usb_submit_urb (cp->inturbp, GFP_KERNEL);
-
-intoend:
-        if (ret < 0) {
-                /* activation of interrupt endpoint has failed. Now clean up. */
-                dbg ("auerswald_int_open: activation of int endpoint failed");
-
-                /* deallocate memory */
-                auerswald_int_free (cp);
-        }
-        return ret;
-}
-
-/* This function is called to deactivate the interrupt
-   endpoint. This function returns 0 if successful or an error code.
-   NOTE: no mutex please!
-*/
-static void auerswald_int_release (pauerswald_t cp)
-{
-        dbg ("auerswald_int_release");
-
-        /* stop the int endpoint */
-	usb_kill_urb (cp->inturbp);
-
-        /* deallocate memory */
-        auerswald_int_free (cp);
-}
-
-/* --------------------------------------------------------------------- */
-/* Helper functions                                                      */
-
-/* wake up waiting readers */
-static void auerchar_disconnect (pauerscon_t scp)
-{
-        pauerchar_t ccp = ((pauerchar_t)((char *)(scp)-(unsigned long)(&((pauerchar_t)0)->scontext)));
-	dbg ("auerchar_disconnect called");
-	ccp->removed = 1;
-	wake_up (&ccp->readwait);
-}
-
-
-/* dispatch a read paket to a waiting character device */
-static void auerchar_ctrlread_dispatch (pauerscon_t scp, pauerbuf_t bp)
-{
-	unsigned long flags;
-        pauerchar_t ccp;
-        pauerbuf_t newbp = NULL;
-        char * charp;
-        dbg ("auerchar_ctrlread_dispatch called");
-        ccp = ((pauerchar_t)((char *)(scp)-(unsigned long)(&((pauerchar_t)0)->scontext)));
-
-        /* get a read buffer from character device context */
-        spin_lock_irqsave (&ccp->bufctl.lock, flags);
-        if (!list_empty (&ccp->bufctl.free_buff_list)) {
-                /* yes: get the entry */
-                struct list_head *tmp = ccp->bufctl.free_buff_list.next;
-                list_del (tmp);
-                newbp = list_entry (tmp, auerbuf_t, buff_list);
-        }
-        spin_unlock_irqrestore (&ccp->bufctl.lock, flags);
-
-        if (!newbp) {
-                dbg ("No read buffer available, discard paket!");
-                return;     /* no buffer, no dispatch */
-        }
-
-        /* copy information to new buffer element
-           (all buffers have the same length) */
-        charp = newbp->bufp;
-        newbp->bufp = bp->bufp;
-        bp->bufp = charp;
-        newbp->len = bp->len;
-
-        /* insert new buffer in read list */
-        spin_lock_irqsave (&ccp->bufctl.lock, flags);
-	list_add_tail (&newbp->buff_list, &ccp->bufctl.rec_buff_list);
-        spin_unlock_irqrestore (&ccp->bufctl.lock, flags);
-        dbg ("read buffer appended to rec_list");
-
-        /* wake up pending synchronous reads */
-	wake_up (&ccp->readwait);
-}
-
-
-/* Delete an auerswald driver context */
-static void auerswald_delete( pauerswald_t cp)
-{
-	dbg( "auerswald_delete");
-	if (cp == NULL)
-		return;
-
-	/* Wake up all processes waiting for a buffer */
-	wake_up (&cp->bufferwait);
-
-	/* Cleaning up */
-	auerswald_int_release (cp);
-	auerchain_free (&cp->controlchain);
-	auerbuf_free_buffers (&cp->bufctl);
-
-	/* release the memory */
-	kfree( cp);
-}
-
-
-/* Delete an auerswald character context */
-static void auerchar_delete( pauerchar_t ccp)
-{
-	dbg ("auerchar_delete");
-	if (ccp == NULL)
-		return;
-
-        /* wake up pending synchronous reads */
-	ccp->removed = 1;
-	wake_up (&ccp->readwait);
-
-	/* remove the read buffer */
-	if (ccp->readbuf) {
-		auerbuf_releasebuf (ccp->readbuf);
-		ccp->readbuf = NULL;
-	}
-
-	/* remove the character buffers */
-	auerbuf_free_buffers (&ccp->bufctl);
-
-	/* release the memory */
-	kfree( ccp);
-}
-
-
-/* add a new service to the device
-   scp->id must be set!
-   return: 0 if OK, else error code
-*/
-static int auerswald_addservice (pauerswald_t cp, pauerscon_t scp)
-{
-	int ret;
-
-	/* is the device available? */
-	if (!cp->usbdev) {
-		dbg ("usbdev == NULL");
-		return -EIO;	/*no: can not add a service, sorry*/
-	}
-
-	/* is the service available? */
-	if (cp->services[scp->id]) {
-		dbg ("service is busy");
-                return -EBUSY;
-	}
-
-	/* device is available, service is free */
-	cp->services[scp->id] = scp;
-
-	/* register service in device */
-	ret = auerchain_control_msg(
-		&cp->controlchain,                      /* pointer to control chain */
-		cp->usbdev,                             /* pointer to device */
-		usb_sndctrlpipe (cp->usbdev, 0),        /* pipe to control endpoint */
-		AUV_CHANNELCTL,                         /* USB message request value */
-		AUT_WREQ,                               /* USB message request type value */
-		0x01,              /* open                 USB message value */
-		scp->id,            		        /* USB message index value */
-		NULL,                                   /* pointer to the data to send */
-		0,                                      /* length in bytes of the data to send */
-		HZ * 2);                                /* time to wait for the message to complete before timing out */
-	if (ret < 0) {
-		dbg ("auerswald_addservice: auerchain_control_msg returned error code %d", ret);
-		/* undo above actions */
-		cp->services[scp->id] = NULL;
-		return ret;
-	}
-
-	dbg ("auerswald_addservice: channel open OK");
-	return 0;
-}
-
-
-/* remove a service from the device
-   scp->id must be set! */
-static void auerswald_removeservice (pauerswald_t cp, pauerscon_t scp)
-{
-	dbg ("auerswald_removeservice called");
-
-	/* check if we have a service allocated */
-	if (scp->id == AUH_UNASSIGNED)
-		return;
-
-	/* If there is a device: close the channel */
-	if (cp->usbdev) {
-		/* Close the service channel inside the device */
-		int ret = auerchain_control_msg(
-		&cp->controlchain,            		/* pointer to control chain */
-		cp->usbdev,         		        /* pointer to device */
-		usb_sndctrlpipe (cp->usbdev, 0),	/* pipe to control endpoint */
-		AUV_CHANNELCTL,                         /* USB message request value */
-		AUT_WREQ,                               /* USB message request type value */
-		0x00,              // close             /* USB message value */
-		scp->id,            		        /* USB message index value */
-		NULL,                                   /* pointer to the data to send */
-		0,                                      /* length in bytes of the data to send */
-		HZ * 2);                                /* time to wait for the message to complete before timing out */
-		if (ret < 0) {
-			dbg ("auerswald_removeservice: auerchain_control_msg returned error code %d", ret);
-		}
-		else {
-			dbg ("auerswald_removeservice: channel close OK");
-		}
-	}
-
-	/* remove the service from the device */
-	cp->services[scp->id] = NULL;
-	scp->id = AUH_UNASSIGNED;
-}
-
-
-/* --------------------------------------------------------------------- */
-/* Char device functions                                                 */
-
-/* Open a new character device */
-static int auerchar_open (struct inode *inode, struct file *file)
-{
-	int dtindex = iminor(inode);
-	pauerswald_t cp = NULL;
-	pauerchar_t ccp = NULL;
-	struct usb_interface *intf;
-        int ret;
-
-        /* minor number in range? */
-	if (dtindex < 0) {
-		return -ENODEV;
-        }
-	intf = usb_find_interface(&auerswald_driver, dtindex);
-	if (!intf) {
-		return -ENODEV;
-	}
-
-	/* usb device available? */
-	cp = usb_get_intfdata (intf);
-	if (cp == NULL) {
-		return -ENODEV;
-	}
-	if (mutex_lock_interruptible(&cp->mutex)) {
-		return -ERESTARTSYS;
-	}
-
-	/* we have access to the device. Now lets allocate memory */
-	ccp = kzalloc(sizeof(auerchar_t), GFP_KERNEL);
-	if (ccp == NULL) {
-		err ("out of memory");
-		ret = -ENOMEM;
-		goto ofail;
-	}
-
-	/* Initialize device descriptor */
-	mutex_init(&ccp->mutex);
-	mutex_init(&ccp->readmutex);
-        auerbuf_init (&ccp->bufctl);
-        ccp->scontext.id = AUH_UNASSIGNED;
-        ccp->scontext.dispatch = auerchar_ctrlread_dispatch;
-	ccp->scontext.disconnect = auerchar_disconnect;
-	init_waitqueue_head (&ccp->readwait);
-
-	ret = auerbuf_setup (&ccp->bufctl, AU_RBUFFERS, cp->maxControlLength+AUH_SIZE);
-       	if (ret) {
-		goto ofail;
-	}
-
-	cp->open_count++;
-	ccp->auerdev = cp;
-	dbg("open %s as /dev/%s", cp->dev_desc, cp->name);
-	mutex_unlock(&cp->mutex);
-
-	/* file IO stuff */
-	file->f_pos = 0;
-	file->private_data = ccp;
-	return nonseekable_open(inode, file);
-
-	/* Error exit */
-ofail:	mutex_unlock(&cp->mutex);
-	auerchar_delete (ccp);
-	return ret;
-}
-
-
-/* IOCTL functions */
-static long auerchar_ioctl(struct file *file, unsigned int cmd,
-							unsigned long arg)
-{
-	pauerchar_t ccp = (pauerchar_t) file->private_data;
-	int ret = 0;
-        audevinfo_t devinfo;
-        pauerswald_t cp = NULL;
-	unsigned int u;
-	unsigned int __user *user_arg = (unsigned int __user *)arg;
-
-        dbg ("ioctl");
-
-	/* get the mutexes */
-	if (mutex_lock_interruptible(&ccp->mutex)) {
-		return -ERESTARTSYS;
-	}
-	cp = ccp->auerdev;
-	if (!cp) {
-		mutex_unlock(&ccp->mutex);
-                return -ENODEV;
-	}
-	if (mutex_lock_interruptible(&cp->mutex)) {
-		mutex_unlock(&ccp->mutex);
-		return -ERESTARTSYS;
-	}
-
-	/* Check for removal */
-	if (!cp->usbdev) {
-		mutex_unlock(&cp->mutex);
-		mutex_unlock(&ccp->mutex);
-                return -ENODEV;
-	}
-	lock_kernel();
-	switch (cmd) {
-
-	/* return != 0 if Transmitt channel ready to send */
-	case IOCTL_AU_TXREADY:
-		dbg ("IOCTL_AU_TXREADY");
-		u   = ccp->auerdev
-		   && (ccp->scontext.id != AUH_UNASSIGNED)
-		   && !list_empty (&cp->bufctl.free_buff_list);
-	        ret = put_user (u, user_arg);
-		break;
-
-	/* return != 0 if connected to a service channel */
-	case IOCTL_AU_CONNECT:
-		dbg ("IOCTL_AU_CONNECT");
-		u = (ccp->scontext.id != AUH_UNASSIGNED);
-	        ret = put_user (u, user_arg);
-		break;
-
-	/* return != 0 if Receive Data available */
-	case IOCTL_AU_RXAVAIL:
-		dbg ("IOCTL_AU_RXAVAIL");
-		if (ccp->scontext.id == AUH_UNASSIGNED) {
-                        ret = -EIO;
-                        break;
-                }
-		u = 0;	/* no data */
-		if (ccp->readbuf) {
-			int restlen = ccp->readbuf->len - ccp->readoffset;
-			if (restlen > 0)
-				u = 1;
-		}
-		if (!u) {
-        		if (!list_empty (&ccp->bufctl.rec_buff_list)) {
-				u = 1;
-			}
-		}
-	        ret = put_user (u, user_arg);
-		break;
-
-	/* return the max. buffer length for the device */
-	case IOCTL_AU_BUFLEN:
-		dbg ("IOCTL_AU_BUFLEN");
-		u = cp->maxControlLength;
-	        ret = put_user (u, user_arg);
-		break;
-
-	/* requesting a service channel */
-        case IOCTL_AU_SERVREQ:
-		dbg ("IOCTL_AU_SERVREQ");
-                /* requesting a service means: release the previous one first */
-		auerswald_removeservice (cp, &ccp->scontext);
-		/* get the channel number */
-		ret = get_user (u, user_arg);
-		if (ret) {
-			break;
-		}
-		if ((u < AUH_FIRSTUSERCH) || (u >= AUH_TYPESIZE)) {
-                        ret = -EIO;
-                        break;
-                }
-                dbg ("auerchar service request parameters are ok");
-		ccp->scontext.id = u;
-
-		/* request the service now */
-		ret = auerswald_addservice (cp, &ccp->scontext);
-		if (ret) {
-			/* no: revert service entry */
-                	ccp->scontext.id = AUH_UNASSIGNED;
-		}
-		break;
-
-	/* get a string descriptor for the device */
-	case IOCTL_AU_DEVINFO:
-		dbg ("IOCTL_AU_DEVINFO");
-                if (copy_from_user (&devinfo, (void __user *) arg, sizeof (audevinfo_t))) {
-        		ret = -EFAULT;
-	        	break;
-                }
-		u = strlen(cp->dev_desc)+1;
-		if (u > devinfo.bsize) {
-			u = devinfo.bsize;
-		}
-		ret = copy_to_user(devinfo.buf, cp->dev_desc, u) ? -EFAULT : 0;
-		break;
-
-	/* get the max. string descriptor length */
-        case IOCTL_AU_SLEN:
-		dbg ("IOCTL_AU_SLEN");
-		u = AUSI_DLEN;
-	        ret = put_user (u, user_arg);
-		break;
-
-	default:
-		dbg ("IOCTL_AU_UNKNOWN");
-		ret = -ENOTTY;
-		break;
-        }
-        unlock_kernel();
-	/* release the mutexes */
-	mutex_unlock(&cp->mutex);
-	mutex_unlock(&ccp->mutex);
-	return ret;
-}
-
-/* Read data from the device */
-static ssize_t auerchar_read (struct file *file, char __user *buf, size_t count, loff_t * ppos)
-{
-        unsigned long flags;
-	pauerchar_t ccp = (pauerchar_t) file->private_data;
-        pauerbuf_t   bp = NULL;
-	wait_queue_t wait;
-
-        dbg ("auerchar_read");
-
-	/* Error checking */
-	if (!ccp)
-		return -EIO;
-	if (*ppos)
- 		return -ESPIPE;
-        if (count == 0)
-		return 0;
-
-	/* get the mutex */
-	if (mutex_lock_interruptible(&ccp->mutex))
-		return -ERESTARTSYS;
-
-	/* Can we expect to read something? */
-	if (ccp->scontext.id == AUH_UNASSIGNED) {
-		mutex_unlock(&ccp->mutex);
-                return -EIO;
-	}
-
-	/* only one reader per device allowed */
-	if (mutex_lock_interruptible(&ccp->readmutex)) {
-		mutex_unlock(&ccp->mutex);
-		return -ERESTARTSYS;
-	}
-
-	/* read data from readbuf, if available */
-doreadbuf:
-	bp = ccp->readbuf;
-	if (bp) {
-		/* read the maximum bytes */
-		int restlen = bp->len - ccp->readoffset;
-		if (restlen < 0)
-			restlen = 0;
-		if (count > restlen)
-			count = restlen;
-		if (count) {
-			if (copy_to_user (buf, bp->bufp+ccp->readoffset, count)) {
-				dbg ("auerswald_read: copy_to_user failed");
-				mutex_unlock(&ccp->readmutex);
-				mutex_unlock(&ccp->mutex);
-				return -EFAULT;
-			}
-		}
-		/* advance the read offset */
-		ccp->readoffset += count;
-		restlen -= count;
-		// reuse the read buffer
-		if (restlen <= 0) {
-			auerbuf_releasebuf (bp);
-			ccp->readbuf = NULL;
-		}
-		/* return with number of bytes read */
-		if (count) {
-			mutex_unlock(&ccp->readmutex);
-			mutex_unlock(&ccp->mutex);
-			return count;
-		}
-	}
-
-	/* a read buffer is not available. Try to get the next data block. */
-doreadlist:
-	/* Preparing for sleep */
-	init_waitqueue_entry (&wait, current);
-	set_current_state (TASK_INTERRUPTIBLE);
-	add_wait_queue (&ccp->readwait, &wait);
-
-	bp = NULL;
-	spin_lock_irqsave (&ccp->bufctl.lock, flags);
-        if (!list_empty (&ccp->bufctl.rec_buff_list)) {
-                /* yes: get the entry */
-                struct list_head *tmp = ccp->bufctl.rec_buff_list.next;
-                list_del (tmp);
-                bp = list_entry (tmp, auerbuf_t, buff_list);
-        }
-        spin_unlock_irqrestore (&ccp->bufctl.lock, flags);
-
-	/* have we got data? */
-	if (bp) {
-		ccp->readbuf = bp;
-		ccp->readoffset = AUH_SIZE; /* for headerbyte */
-		set_current_state (TASK_RUNNING);
-		remove_wait_queue (&ccp->readwait, &wait);
-		goto doreadbuf;		  /* now we can read! */
-	}
-
-	/* no data available. Should we wait? */
-	if (file->f_flags & O_NONBLOCK) {
-                dbg ("No read buffer available, returning -EAGAIN");
-		set_current_state (TASK_RUNNING);
-		remove_wait_queue (&ccp->readwait, &wait);
-		mutex_unlock(&ccp->readmutex);
-		mutex_unlock(&ccp->mutex);
-		return -EAGAIN;  /* nonblocking, no data available */
-        }
-
-	/* yes, we should wait! */
-	mutex_unlock(&ccp->mutex); /* allow other operations while we wait */
-	schedule();
-	remove_wait_queue (&ccp->readwait, &wait);
-	if (signal_pending (current)) {
-		/* waked up by a signal */
-		mutex_unlock(&ccp->readmutex);
-		return -ERESTARTSYS;
-	}
-
-	/* Anything left to read? */
-	if ((ccp->scontext.id == AUH_UNASSIGNED) || ccp->removed) {
-		mutex_unlock(&ccp->readmutex);
-		return -EIO;
-	}
-
-	if (mutex_lock_interruptible(&ccp->mutex)) {
-		mutex_unlock(&ccp->readmutex);
-		return -ERESTARTSYS;
-	}
-
-	/* try to read the incoming data again */
-	goto doreadlist;
-}
-
-
-/* Write a data block into the right service channel of the device */
-static ssize_t auerchar_write (struct file *file, const char __user *buf, size_t len, loff_t *ppos)
-{
-	pauerchar_t ccp = (pauerchar_t) file->private_data;
-        pauerswald_t cp = NULL;
-        pauerbuf_t bp;
-        unsigned long flags;
-	int ret;
-	wait_queue_t wait;
-
-        dbg ("auerchar_write %zd bytes", len);
-
-	/* Error checking */
-	if (!ccp)
-		return -EIO;
-        if (*ppos)
-		return -ESPIPE;
-        if (len == 0)
-                return 0;
-
-write_again:
-	/* get the mutex */
-	if (mutex_lock_interruptible(&ccp->mutex))
-		return -ERESTARTSYS;
-
-	/* Can we expect to write something? */
-	if (ccp->scontext.id == AUH_UNASSIGNED) {
-		mutex_unlock(&ccp->mutex);
-                return -EIO;
-	}
-
-	cp = ccp->auerdev;
-	if (!cp) {
-		mutex_unlock(&ccp->mutex);
-		return -ERESTARTSYS;
-	}
-	if (mutex_lock_interruptible(&cp->mutex)) {
-		mutex_unlock(&ccp->mutex);
-		return -ERESTARTSYS;
-	}
-	if (!cp->usbdev) {
-		mutex_unlock(&cp->mutex);
-		mutex_unlock(&ccp->mutex);
-		return -EIO;
-	}
-	/* Prepare for sleep */
-	init_waitqueue_entry (&wait, current);
-	set_current_state (TASK_INTERRUPTIBLE);
-	add_wait_queue (&cp->bufferwait, &wait);
-
-	/* Try to get a buffer from the device pool.
-	   We can't use a buffer from ccp->bufctl because the write
-	   command will last beond a release() */
-	bp = NULL;
-	spin_lock_irqsave (&cp->bufctl.lock, flags);
-        if (!list_empty (&cp->bufctl.free_buff_list)) {
-                /* yes: get the entry */
-                struct list_head *tmp = cp->bufctl.free_buff_list.next;
-                list_del (tmp);
-                bp = list_entry (tmp, auerbuf_t, buff_list);
-        }
-        spin_unlock_irqrestore (&cp->bufctl.lock, flags);
-
-	/* are there any buffers left? */
-	if (!bp) {
-		mutex_unlock(&cp->mutex);
-		mutex_unlock(&ccp->mutex);
-
-		/* NONBLOCK: don't wait */
-		if (file->f_flags & O_NONBLOCK) {
-			set_current_state (TASK_RUNNING);
-			remove_wait_queue (&cp->bufferwait, &wait);
-			return -EAGAIN;
-		}
-
-		/* BLOCKING: wait */
-		schedule();
-		remove_wait_queue (&cp->bufferwait, &wait);
-		if (signal_pending (current)) {
-			/* waked up by a signal */
-			return -ERESTARTSYS;
-		}
-		goto write_again;
-	} else {
-		set_current_state (TASK_RUNNING);
-		remove_wait_queue (&cp->bufferwait, &wait);
-	}
-
-	/* protect against too big write requests */
-	if (len > cp->maxControlLength)
-		len = cp->maxControlLength;
-
-	/* Fill the buffer */
-	if (copy_from_user ( bp->bufp+AUH_SIZE, buf, len)) {
-		dbg ("copy_from_user failed");
-		auerbuf_releasebuf (bp);
-		/* Wake up all processes waiting for a buffer */
-		wake_up (&cp->bufferwait);
-		mutex_unlock(&cp->mutex);
-		mutex_unlock(&ccp->mutex);
-		return -EFAULT;
-	}
-
-	/* set the header byte */
-        *(bp->bufp) = ccp->scontext.id | AUH_DIRECT | AUH_UNSPLIT;
-
-	/* Set the transfer Parameters */
-	bp->len = len+AUH_SIZE;
-        bp->dr->bRequestType = AUT_WREQ;
-	bp->dr->bRequest     = AUV_WBLOCK;
-	bp->dr->wValue       = cpu_to_le16 (0);
-	bp->dr->wIndex       = cpu_to_le16 (ccp->scontext.id | AUH_DIRECT | AUH_UNSPLIT);
-	bp->dr->wLength      = cpu_to_le16 (len+AUH_SIZE);
-	usb_fill_control_urb (bp->urbp, cp->usbdev, usb_sndctrlpipe (cp->usbdev, 0),
-                   (unsigned char*)bp->dr, bp->bufp, len+AUH_SIZE,
-		    auerchar_ctrlwrite_complete, bp);
-	/* up we go */
-	ret = auerchain_submit_urb (&cp->controlchain, bp->urbp);
-	mutex_unlock(&cp->mutex);
-	if (ret) {
-		dbg ("auerchar_write: nonzero result of auerchain_submit_urb %d", ret);
-		auerbuf_releasebuf (bp);
-		/* Wake up all processes waiting for a buffer */
-		wake_up (&cp->bufferwait);
-		mutex_unlock(&ccp->mutex);
-		return -EIO;
-	}
-	else {
-		dbg ("auerchar_write: Write OK");
-		mutex_unlock(&ccp->mutex);
-		return len;
-	}
-}
-
-
-/* Close a character device */
-static int auerchar_release (struct inode *inode, struct file *file)
-{
-	pauerchar_t ccp = (pauerchar_t) file->private_data;
-	pauerswald_t cp;
-	dbg("release");
-
-	mutex_lock(&ccp->mutex);
-	cp = ccp->auerdev;
-	if (cp) {
-		mutex_lock(&cp->mutex);
-		/* remove an open service */
-		auerswald_removeservice (cp, &ccp->scontext);
-		/* detach from device */
-		if ((--cp->open_count <= 0) && (cp->usbdev == NULL)) {
-			/* usb device waits for removal */
-			mutex_unlock(&cp->mutex);
-			auerswald_delete (cp);
-		} else {
-			mutex_unlock(&cp->mutex);
-		}
-		cp = NULL;
-		ccp->auerdev = NULL;
-	}
-	mutex_unlock(&ccp->mutex);
-	auerchar_delete (ccp);
-
-	return 0;
-}
-
-
-/*----------------------------------------------------------------------*/
-/* File operation structure                                             */
-static const struct file_operations auerswald_fops =
-{
-	.owner =	THIS_MODULE,
-	.llseek =	no_llseek,
-	.read =		auerchar_read,
-	.write =        auerchar_write,
-	.unlocked_ioctl = auerchar_ioctl,
-	.open =		auerchar_open,
-	.release =	auerchar_release,
-};
-
-static struct usb_class_driver auerswald_class = {
-	.name =		"auer%d",
-	.fops =		&auerswald_fops,
-	.minor_base =	AUER_MINOR_BASE,
-};
-
-
-/* --------------------------------------------------------------------- */
-/* Special USB driver functions                                          */
-
-/* Probe if this driver wants to serve an USB device
-
-   This entry point is called whenever a new device is attached to the bus.
-   Then the device driver has to create a new instance of its internal data
-   structures for the new device.
-
-   The  dev argument specifies the device context, which contains pointers
-   to all USB descriptors. The  interface argument specifies the interface
-   number. If a USB driver wants to bind itself to a particular device and
-   interface it has to return a pointer. This pointer normally references
-   the device driver's context structure.
-
-   Probing normally is done by checking the vendor and product identifications
-   or the class and subclass definitions. If they match the interface number
-   is compared with the ones supported by the driver. When probing is done
-   class based it might be necessary to parse some more USB descriptors because
-   the device properties can differ in a wide range.
-*/
-static int auerswald_probe (struct usb_interface *intf,
-			    const struct usb_device_id *id)
-{
-	struct usb_device *usbdev = interface_to_usbdev(intf);
-	pauerswald_t cp = NULL;
-	unsigned int u = 0;
-	__le16 *pbuf;
-	int ret;
-
-	dbg ("probe: vendor id 0x%x, device id 0x%x",
-	     le16_to_cpu(usbdev->descriptor.idVendor),
-	     le16_to_cpu(usbdev->descriptor.idProduct));
-
-        /* we use only the first -and only- interface */
-        if (intf->altsetting->desc.bInterfaceNumber != 0)
-		return -ENODEV;
-
-	/* allocate memory for our device and initialize it */
-	cp = kzalloc (sizeof(auerswald_t), GFP_KERNEL);
-	if (cp == NULL) {
-		err ("out of memory");
-		goto pfail;
-	}
-
-	/* Initialize device descriptor */
-	mutex_init(&cp->mutex);
-	cp->usbdev = usbdev;
-	auerchain_init (&cp->controlchain);
-        auerbuf_init (&cp->bufctl);
-	init_waitqueue_head (&cp->bufferwait);
-
-	ret = usb_register_dev(intf, &auerswald_class);
-	if (ret) {
-		err ("Not able to get a minor for this device.");
-		goto pfail;
-	}
-
-	/* Give the device a name */
-	sprintf (cp->name, "usb/auer%d", intf->minor);
-
-	/* Store the index */
-	cp->dtindex = intf->minor;
-
-	/* Get the usb version of the device */
-	cp->version = le16_to_cpu(cp->usbdev->descriptor.bcdDevice);
-	dbg ("Version is %X", cp->version);
-
-	/* allow some time to settle the device */
-	msleep(334);
-
-	/* Try to get a suitable textual description of the device */
-	/* Device name:*/
-	ret = usb_string( cp->usbdev, AUSI_DEVICE, cp->dev_desc, AUSI_DLEN-1);
-	if (ret >= 0) {
-		u += ret;
-		/* Append Serial Number */
-		memcpy(&cp->dev_desc[u], ",Ser# ", 6);
-		u += 6;
-		ret = usb_string( cp->usbdev, AUSI_SERIALNR, &cp->dev_desc[u], AUSI_DLEN-u-1);
-		if (ret >= 0) {
-			u += ret;
-			/* Append subscriber number */
-			memcpy(&cp->dev_desc[u], ", ", 2);
-			u += 2;
-			ret = usb_string( cp->usbdev, AUSI_MSN, &cp->dev_desc[u], AUSI_DLEN-u-1);
-			if (ret >= 0) {
-				u += ret;
-			}
-		}
-	}
-	cp->dev_desc[u] = '\0';
-	info("device is a %s", cp->dev_desc);
-
-        /* get the maximum allowed control transfer length */
-        pbuf = kmalloc(2, GFP_KERNEL);    /* use an allocated buffer because of urb target */
-        if (!pbuf) {
-		err( "out of memory");
-		goto pfail;
-	}
-        ret = usb_control_msg(cp->usbdev,           /* pointer to device */
-                usb_rcvctrlpipe( cp->usbdev, 0 ),   /* pipe to control endpoint */
-                AUV_GETINFO,                        /* USB message request value */
-                AUT_RREQ,                           /* USB message request type value */
-                0,                                  /* USB message value */
-                AUDI_MBCTRANS,                      /* USB message index value */
-                pbuf,                               /* pointer to the receive buffer */
-                2,                                  /* length of the buffer */
-                2000);                            /* time to wait for the message to complete before timing out */
-        if (ret == 2) {
-	        cp->maxControlLength = le16_to_cpup(pbuf);
-                kfree(pbuf);
-                dbg("setup: max. allowed control transfersize is %d bytes", cp->maxControlLength);
-        } else {
-                kfree(pbuf);
-                err("setup: getting max. allowed control transfer length failed with error %d", ret);
-		goto pfail;
-        }
-
-	/* allocate a chain for the control messages */
-        if (auerchain_setup (&cp->controlchain, AUCH_ELEMENTS)) {
-		err ("out of memory");
-		goto pfail;
-	}
-
-        /* allocate buffers for control messages */
-	if (auerbuf_setup (&cp->bufctl, AU_RBUFFERS, cp->maxControlLength+AUH_SIZE)) {
-		err ("out of memory");
-		goto pfail;
-	}
-
-	/* start the interrupt endpoint */
-	if (auerswald_int_open (cp)) {
-		err ("int endpoint failed");
-		goto pfail;
-	}
-
-	/* all OK */
-	usb_set_intfdata (intf, cp);
-	return 0;
-
-	/* Error exit: clean up the memory */
-pfail:	auerswald_delete (cp);
-	return -EIO;
-}
-
-
-/* Disconnect driver from a served device
-
-   This function is called whenever a device which was served by this driver
-   is disconnected.
-
-   The argument  dev specifies the device context and the  driver_context
-   returns a pointer to the previously registered  driver_context of the
-   probe function. After returning from the disconnect function the USB
-   framework completely deallocates all data structures associated with
-   this device. So especially the usb_device structure must not be used
-   any longer by the usb driver.
-*/
-static void auerswald_disconnect (struct usb_interface *intf)
-{
-	pauerswald_t cp = usb_get_intfdata (intf);
-	unsigned int u;
-
-	usb_set_intfdata (intf, NULL);
-	if (!cp)
-		return;
-
-	/* give back our USB minor number */
-	usb_deregister_dev(intf, &auerswald_class);
-
-	mutex_lock(&cp->mutex);
-	info ("device /dev/%s now disconnecting", cp->name);
-
-	/* Stop the interrupt endpoint */
-	auerswald_int_release (cp);
-
-	/* remove the control chain allocated in auerswald_probe
-	   This has the benefit of
-	   a) all pending (a)synchronous urbs are unlinked
-	   b) all buffers dealing with urbs are reclaimed
-	*/
-	auerchain_free (&cp->controlchain);
-
-	if (cp->open_count == 0) {
-		/* nobody is using this device. So we can clean up now */
-		mutex_unlock(&cp->mutex);
-		/* mutex_unlock() is possible here because no other task
-		   can open the device (see above). I don't want
-		   to kfree() a locked mutex. */
-
-		auerswald_delete (cp);
-	} else {
-		/* device is used. Remove the pointer to the
-		   usb device (it's not valid any more). The last
-		   release() will do the clean up */
-		cp->usbdev = NULL;
-		mutex_unlock(&cp->mutex);
-		/* Terminate waiting writers */
-		wake_up (&cp->bufferwait);
-		/* Inform all waiting readers */
-		for ( u = 0; u < AUH_TYPESIZE; u++) {
-			pauerscon_t scp = cp->services[u];
-			if (scp)
-				scp->disconnect( scp);
-		}
-	}
-}
-
-/* Descriptor for the devices which are served by this driver.
-   NOTE: this struct is parsed by the usbmanager install scripts.
-         Don't change without caution!
-*/
-static struct usb_device_id auerswald_ids [] = {
-	{ USB_DEVICE (ID_AUERSWALD, 0x00C0) },          /* COMpact 2104 USB */
-	{ USB_DEVICE (ID_AUERSWALD, 0x00DB) },          /* COMpact 4410/2206 USB */
-	{ USB_DEVICE (ID_AUERSWALD, 0x00DC) }, /* COMpact 4406 DSL */
-	{ USB_DEVICE (ID_AUERSWALD, 0x00DD) }, /* COMpact 2204 USB */
-	{ USB_DEVICE (ID_AUERSWALD, 0x00F1) },          /* Comfort 2000 System Telephone */
-	{ USB_DEVICE (ID_AUERSWALD, 0x00F2) },          /* Comfort 1200 System Telephone */
-        { }			                        /* Terminating entry */
-};
-
-/* Standard module device table */
-MODULE_DEVICE_TABLE (usb, auerswald_ids);
-
-/* Standard usb driver struct */
-static struct usb_driver auerswald_driver = {
-	.name =		"auerswald",
-	.probe =	auerswald_probe,
-	.disconnect =	auerswald_disconnect,
-	.id_table =	auerswald_ids,
-};
-
-
-/* --------------------------------------------------------------------- */
-/* Module loading/unloading                                              */
-
-/* Driver initialisation. Called after module loading.
-   NOTE: there is no concurrency at _init
-*/
-static int __init auerswald_init (void)
-{
-	int result;
-	dbg ("init");
-
-	/* register driver at the USB subsystem */
-	result = usb_register (&auerswald_driver);
-	if (result < 0) {
-		err ("driver could not be registered");
-		return -1;
-	}
-	return 0;
-}
-
-/* Driver deinit. Called before module removal.
-   NOTE: there is no concurrency at _cleanup
-*/
-static void __exit auerswald_cleanup (void)
-{
-	dbg ("cleanup");
-	usb_deregister (&auerswald_driver);
-}
-
-/* --------------------------------------------------------------------- */
-/* Linux device driver module description                                */
-
-MODULE_AUTHOR (DRIVER_AUTHOR);
-MODULE_DESCRIPTION (DRIVER_DESC);
-MODULE_LICENSE ("GPL");
-
-module_init (auerswald_init);
-module_exit (auerswald_cleanup);
-
-/* --------------------------------------------------------------------- */
-
diff --git a/drivers/usb/misc/iowarrior.c b/drivers/usb/misc/iowarrior.c
index e6ca9979e3ae..a4ef77ef917d 100644
--- a/drivers/usb/misc/iowarrior.c
+++ b/drivers/usb/misc/iowarrior.c
@@ -19,7 +19,6 @@
 #include <linux/slab.h>
 #include <linux/sched.h>
 #include <linux/poll.h>
-#include <linux/version.h>
 #include <linux/usb/iowarrior.h>
 
 /* Version Information */
diff --git a/drivers/usb/misc/isight_firmware.c b/drivers/usb/misc/isight_firmware.c
index d94aa7387608..b897f6554ecd 100644
--- a/drivers/usb/misc/isight_firmware.c
+++ b/drivers/usb/misc/isight_firmware.c
@@ -48,7 +48,8 @@ static int isight_firmware_load(struct usb_interface *intf,
 
 	if (request_firmware(&firmware, "isight.fw", &dev->dev) != 0) {
 		printk(KERN_ERR "Unable to load isight firmware\n");
-		return -ENODEV;
+		ret = -ENODEV;
+		goto out;
 	}
 
 	ptr = firmware->data;
@@ -91,7 +92,6 @@ static int isight_firmware_load(struct usb_interface *intf,
 			     buf, llen, 300) != llen) {
 				printk(KERN_ERR
 				       "Failed to load isight firmware\n");
-				kfree(buf);
 				ret = -ENODEV;
 				goto out;
 			}
diff --git a/drivers/usb/misc/sisusbvga/sisusb.c b/drivers/usb/misc/sisusbvga/sisusb.c
index fbace41a7cba..69c34a58e205 100644
--- a/drivers/usb/misc/sisusbvga/sisusb.c
+++ b/drivers/usb/misc/sisusbvga/sisusb.c
@@ -3270,6 +3270,7 @@ static struct usb_device_id sisusb_table [] = {
 	{ USB_DEVICE(0x0711, 0x0900) },
 	{ USB_DEVICE(0x0711, 0x0901) },
 	{ USB_DEVICE(0x0711, 0x0902) },
+	{ USB_DEVICE(0x0711, 0x0918) },
 	{ USB_DEVICE(0x182d, 0x021c) },
 	{ USB_DEVICE(0x182d, 0x0269) },
 	{ }
diff --git a/drivers/usb/misc/usbtest.c b/drivers/usb/misc/usbtest.c
index 054dedd28127..b358c4e1cf21 100644
--- a/drivers/usb/misc/usbtest.c
+++ b/drivers/usb/misc/usbtest.c
@@ -81,7 +81,7 @@ static struct usb_device *testdev_to_usbdev (struct usbtest_dev *test)
 
 #define ERROR(tdev, fmt, args...) \
 	dev_err(&(tdev)->intf->dev , fmt , ## args)
-#define WARN(tdev, fmt, args...) \
+#define WARNING(tdev, fmt, args...) \
 	dev_warn(&(tdev)->intf->dev , fmt , ## args)
 
 /*-------------------------------------------------------------------------*/
@@ -1946,7 +1946,7 @@ usbtest_probe (struct usb_interface *intf, const struct usb_device_id *id)
 
 			status = get_endpoints (dev, intf);
 			if (status < 0) {
-				WARN(dev, "couldn't get endpoints, %d\n",
+				WARNING(dev, "couldn't get endpoints, %d\n",
 						status);
 				return status;
 			}
diff --git a/drivers/usb/mon/mon_text.c b/drivers/usb/mon/mon_text.c
index 5e3e4e9b6c77..1f715436d6d3 100644
--- a/drivers/usb/mon/mon_text.c
+++ b/drivers/usb/mon/mon_text.c
@@ -87,7 +87,7 @@ struct mon_reader_text {
 
 static struct dentry *mon_dir;		/* Usually /sys/kernel/debug/usbmon */
 
-static void mon_text_ctor(struct kmem_cache *, void *);
+static void mon_text_ctor(void *);
 
 struct mon_text_ptr {
 	int cnt, limit;
@@ -720,7 +720,7 @@ void mon_text_del(struct mon_bus *mbus)
 /*
  * Slab interface: constructor.
  */
-static void mon_text_ctor(struct kmem_cache *slab, void *mem)
+static void mon_text_ctor(void *mem)
 {
 	/*
 	 * Nothing to initialize. No, really!
diff --git a/drivers/usb/musb/Kconfig b/drivers/usb/musb/Kconfig
new file mode 100644
index 000000000000..a0017486ad4e
--- /dev/null
+++ b/drivers/usb/musb/Kconfig
@@ -0,0 +1,175 @@
+#
+# USB Dual Role (OTG-ready) Controller Drivers
+# for silicon based on Mentor Graphics INVENTRA designs
+#
+
+comment "Enable Host or Gadget support to see Inventra options"
+	depends on !USB && USB_GADGET=n
+
+# (M)HDRC = (Multipoint) Highspeed Dual-Role Controller
+config USB_MUSB_HDRC
+	depends on (USB || USB_GADGET) && HAVE_CLK
+	select TWL4030_USB if MACH_OMAP_3430SDP
+	tristate 'Inventra Highspeed Dual Role Controller (TI, ...)'
+	help
+	  Say Y here if your system has a dual role high speed USB
+	  controller based on the Mentor Graphics silicon IP.  Then
+	  configure options to match your silicon and the board
+	  it's being used with, including the USB peripheral role,
+	  or the USB host role, or both.
+
+	  Texas Instruments parts using this IP include DaVinci 644x,
+	  OMAP 243x, OMAP 343x, and TUSB 6010.
+
+	  If you do not know what this is, please say N.
+
+	  To compile this driver as a module, choose M here; the
+	  module will be called "musb_hdrc".
+
+config USB_MUSB_SOC
+	boolean
+	depends on USB_MUSB_HDRC
+	default y if ARCH_DAVINCI
+	default y if ARCH_OMAP2430
+	default y if ARCH_OMAP34XX
+	help
+	  Use a static <asm/arch/hdrc_cnf.h> file to describe how the
+	  controller is configured (endpoints, mechanisms, etc) on the
+	  current iteration of a given system-on-chip.
+
+comment "DaVinci 644x USB support"
+	depends on USB_MUSB_HDRC && ARCH_DAVINCI
+
+comment "OMAP 243x high speed USB support"
+	depends on USB_MUSB_HDRC && ARCH_OMAP2430
+
+comment "OMAP 343x high speed USB support"
+	depends on USB_MUSB_HDRC && ARCH_OMAP34XX
+
+config USB_TUSB6010
+	boolean "TUSB 6010 support"
+	depends on USB_MUSB_HDRC && !USB_MUSB_SOC
+	default y
+	help
+	  The TUSB 6010 chip, from Texas Instruments, connects a discrete
+	  HDRC core using a 16-bit parallel bus (NOR flash style) or VLYNQ
+	  (a high speed serial link).  It can use system-specific external
+	  DMA controllers.
+
+choice
+	prompt "Driver Mode"
+	depends on USB_MUSB_HDRC
+	help
+	  Dual-Role devices can support both host and peripheral roles,
+	  as well as a the special "OTG Device" role which can switch
+	  between both roles as needed.
+
+# use USB_MUSB_HDRC_HCD not USB_MUSB_HOST to #ifdef host side support;
+# OTG needs both roles, not just USB_MUSB_HOST.
+config USB_MUSB_HOST
+	depends on USB
+	bool "USB Host"
+	help
+	  Say Y here if your system supports the USB host role.
+	  If it has a USB "A" (rectangular), "Mini-A" (uncommon),
+	  or "Mini-AB" connector, it supports the host role.
+	  (With a "Mini-AB" connector, you should enable USB OTG.)
+
+# use USB_GADGET_MUSB_HDRC not USB_MUSB_PERIPHERAL to #ifdef peripheral
+# side support ... OTG needs both roles
+config USB_MUSB_PERIPHERAL
+	depends on USB_GADGET
+	bool "USB Peripheral (gadget stack)"
+	select USB_GADGET_MUSB_HDRC
+	help
+	  Say Y here if your system supports the USB peripheral role.
+	  If it has a USB "B" (squarish), "Mini-B", or "Mini-AB"
+	  connector, it supports the peripheral role.
+	  (With a "Mini-AB" connector, you should enable USB OTG.)
+
+config USB_MUSB_OTG
+	depends on USB && USB_GADGET && PM && EXPERIMENTAL
+	bool "Both host and peripheral:  USB OTG (On The Go) Device"
+	select USB_GADGET_MUSB_HDRC
+	select USB_OTG
+	help
+	   The most notable feature of USB OTG is support for a
+	   "Dual-Role" device, which can act as either a device
+	   or a host.  The initial role choice can be changed
+	   later, when two dual-role devices talk to each other.
+
+	   At this writing, the OTG support in this driver is incomplete,
+	   omitting the mandatory HNP or SRP protocols.  However, some
+	   of the cable based role switching works.  (That is, grounding
+	   the ID pin switches the controller to host mode, while leaving
+	   it floating leaves it in peripheral mode.)
+
+	   Select this if your system has a Mini-AB connector, or
+	   to simplify certain kinds of configuration.
+
+	   To implement your OTG Targeted Peripherals List (TPL), enable
+	   USB_OTG_WHITELIST and update "drivers/usb/core/otg_whitelist.h"
+	   to match your requirements.
+
+endchoice
+
+# enable peripheral support (including with OTG)
+config USB_GADGET_MUSB_HDRC
+	bool
+	depends on USB_MUSB_HDRC && (USB_MUSB_PERIPHERAL || USB_MUSB_OTG)
+#	default y
+#	select USB_GADGET_DUALSPEED
+#	select USB_GADGET_SELECTED
+
+# enables host support (including with OTG)
+config USB_MUSB_HDRC_HCD
+	bool
+	depends on USB_MUSB_HDRC && (USB_MUSB_HOST || USB_MUSB_OTG)
+	select USB_OTG if USB_GADGET_MUSB_HDRC
+	default y
+
+
+config MUSB_PIO_ONLY
+	bool 'Disable DMA (always use PIO)'
+	depends on USB_MUSB_HDRC
+	default y if USB_TUSB6010
+	help
+	  All data is copied between memory and FIFO by the CPU.
+	  DMA controllers are ignored.
+
+	  Do not select 'n' here unless DMA support for your SOC or board
+	  is unavailable (or unstable).  When DMA is enabled at compile time,
+	  you can still disable it at run time using the "use_dma=n" module
+	  parameter.
+
+config USB_INVENTRA_DMA
+	bool
+	depends on USB_MUSB_HDRC && !MUSB_PIO_ONLY
+	default ARCH_OMAP2430 || ARCH_OMAP34XX
+	help
+	  Enable DMA transfers using Mentor's engine.
+
+config USB_TI_CPPI_DMA
+	bool
+	depends on USB_MUSB_HDRC && !MUSB_PIO_ONLY
+	default ARCH_DAVINCI
+	help
+	  Enable DMA transfers when TI CPPI DMA is available.
+
+config USB_TUSB_OMAP_DMA
+	bool
+	depends on USB_MUSB_HDRC && !MUSB_PIO_ONLY
+	depends on USB_TUSB6010
+	depends on ARCH_OMAP
+	default y
+	help
+	  Enable DMA transfers on TUSB 6010 when OMAP DMA is available.
+
+config	USB_MUSB_DEBUG
+	depends on USB_MUSB_HDRC
+	bool "Enable debugging messages"
+	default n
+	help
+	  This enables musb debugging. To set the logging level use the debug
+	  module parameter. Starting at level 3, per-transfer (urb, usb_request,
+	  packet, or dma transfer) tracing may kick in.
diff --git a/drivers/usb/musb/Makefile b/drivers/usb/musb/Makefile
new file mode 100644
index 000000000000..b6af0d687a73
--- /dev/null
+++ b/drivers/usb/musb/Makefile
@@ -0,0 +1,69 @@
+#
+# for USB OTG silicon based on Mentor Graphics INVENTRA designs
+#
+
+musb_hdrc-objs := musb_core.o
+
+obj-$(CONFIG_USB_MUSB_HDRC)	+= musb_hdrc.o
+
+ifeq ($(CONFIG_ARCH_DAVINCI),y)
+	musb_hdrc-objs	+= davinci.o
+endif
+
+ifeq ($(CONFIG_USB_TUSB6010),y)
+	musb_hdrc-objs	+= tusb6010.o
+endif
+
+ifeq ($(CONFIG_ARCH_OMAP2430),y)
+	musb_hdrc-objs	+= omap2430.o
+endif
+
+ifeq ($(CONFIG_ARCH_OMAP3430),y)
+	musb_hdrc-objs	+= omap2430.o
+endif
+
+ifeq ($(CONFIG_USB_GADGET_MUSB_HDRC),y)
+	musb_hdrc-objs		+= musb_gadget_ep0.o musb_gadget.o
+endif
+
+ifeq ($(CONFIG_USB_MUSB_HDRC_HCD),y)
+	musb_hdrc-objs		+= musb_virthub.o musb_host.o
+endif
+
+# the kconfig must guarantee that only one of the
+# possible I/O schemes will be enabled at a time ...
+# PIO only, or DMA (several potential schemes).
+# though PIO is always there to back up DMA, and for ep0
+
+ifneq ($(CONFIG_MUSB_PIO_ONLY),y)
+
+  ifeq ($(CONFIG_USB_INVENTRA_DMA),y)
+    musb_hdrc-objs		+= musbhsdma.o
+
+  else
+    ifeq ($(CONFIG_USB_TI_CPPI_DMA),y)
+      musb_hdrc-objs		+= cppi_dma.o
+
+    else
+      ifeq ($(CONFIG_USB_TUSB_OMAP_DMA),y)
+        musb_hdrc-objs		+= tusb6010_omap.o
+
+      endif
+    endif
+  endif
+endif
+
+
+################################################################################
+
+# FIXME remove all these extra "-DMUSB_* things, stick to CONFIG_*
+
+ifeq ($(CONFIG_USB_INVENTRA_MUSB_HAS_AHB_ID),y)
+	EXTRA_CFLAGS += -DMUSB_AHB_ID
+endif
+
+# Debugging
+
+ifeq ($(CONFIG_USB_MUSB_DEBUG),y)
+	EXTRA_CFLAGS += -DDEBUG
+endif
diff --git a/drivers/usb/musb/cppi_dma.c b/drivers/usb/musb/cppi_dma.c
new file mode 100644
index 000000000000..5ad6d0893cbe
--- /dev/null
+++ b/drivers/usb/musb/cppi_dma.c
@@ -0,0 +1,1540 @@
+/*
+ * Copyright (C) 2005-2006 by Texas Instruments
+ *
+ * This file implements a DMA  interface using TI's CPPI DMA.
+ * For now it's DaVinci-only, but CPPI isn't specific to DaVinci or USB.
+ * The TUSB6020, using VLYNQ, has CPPI that looks much like DaVinci.
+ */
+
+#include <linux/usb.h>
+
+#include "musb_core.h"
+#include "cppi_dma.h"
+
+
+/* CPPI DMA status 7-mar-2006:
+ *
+ * - See musb_{host,gadget}.c for more info
+ *
+ * - Correct RX DMA generally forces the engine into irq-per-packet mode,
+ *   which can easily saturate the CPU under non-mass-storage loads.
+ *
+ * NOTES 24-aug-2006 (2.6.18-rc4):
+ *
+ * - peripheral RXDMA wedged in a test with packets of length 512/512/1.
+ *   evidently after the 1 byte packet was received and acked, the queue
+ *   of BDs got garbaged so it wouldn't empty the fifo.  (rxcsr 0x2003,
+ *   and RX DMA0: 4 left, 80000000 8feff880, 8feff860 8feff860; 8f321401
+ *   004001ff 00000001 .. 8feff860)  Host was just getting NAKed on tx
+ *   of its next (512 byte) packet.  IRQ issues?
+ *
+ * REVISIT:  the "transfer DMA" glue between CPPI and USB fifos will
+ * evidently also directly update the RX and TX CSRs ... so audit all
+ * host and peripheral side DMA code to avoid CSR access after DMA has
+ * been started.
+ */
+
+/* REVISIT now we can avoid preallocating these descriptors; or
+ * more simply, switch to a global freelist not per-channel ones.
+ * Note: at full speed, 64 descriptors == 4K bulk data.
+ */
+#define NUM_TXCHAN_BD       64
+#define NUM_RXCHAN_BD       64
+
+static inline void cpu_drain_writebuffer(void)
+{
+	wmb();
+#ifdef	CONFIG_CPU_ARM926T
+	/* REVISIT this "should not be needed",
+	 * but lack of it sure seemed to hurt ...
+	 */
+	asm("mcr p15, 0, r0, c7, c10, 4 @ drain write buffer\n");
+#endif
+}
+
+static inline struct cppi_descriptor *cppi_bd_alloc(struct cppi_channel *c)
+{
+	struct cppi_descriptor	*bd = c->freelist;
+
+	if (bd)
+		c->freelist = bd->next;
+	return bd;
+}
+
+static inline void
+cppi_bd_free(struct cppi_channel *c, struct cppi_descriptor *bd)
+{
+	if (!bd)
+		return;
+	bd->next = c->freelist;
+	c->freelist = bd;
+}
+
+/*
+ *  Start DMA controller
+ *
+ *  Initialize the DMA controller as necessary.
+ */
+
+/* zero out entire rx state RAM entry for the channel */
+static void cppi_reset_rx(struct cppi_rx_stateram __iomem *rx)
+{
+	musb_writel(&rx->rx_skipbytes, 0, 0);
+	musb_writel(&rx->rx_head, 0, 0);
+	musb_writel(&rx->rx_sop, 0, 0);
+	musb_writel(&rx->rx_current, 0, 0);
+	musb_writel(&rx->rx_buf_current, 0, 0);
+	musb_writel(&rx->rx_len_len, 0, 0);
+	musb_writel(&rx->rx_cnt_cnt, 0, 0);
+}
+
+/* zero out entire tx state RAM entry for the channel */
+static void cppi_reset_tx(struct cppi_tx_stateram __iomem *tx, u32 ptr)
+{
+	musb_writel(&tx->tx_head, 0, 0);
+	musb_writel(&tx->tx_buf, 0, 0);
+	musb_writel(&tx->tx_current, 0, 0);
+	musb_writel(&tx->tx_buf_current, 0, 0);
+	musb_writel(&tx->tx_info, 0, 0);
+	musb_writel(&tx->tx_rem_len, 0, 0);
+	/* musb_writel(&tx->tx_dummy, 0, 0); */
+	musb_writel(&tx->tx_complete, 0, ptr);
+}
+
+static void __init cppi_pool_init(struct cppi *cppi, struct cppi_channel *c)
+{
+	int	j;
+
+	/* initialize channel fields */
+	c->head = NULL;
+	c->tail = NULL;
+	c->last_processed = NULL;
+	c->channel.status = MUSB_DMA_STATUS_UNKNOWN;
+	c->controller = cppi;
+	c->is_rndis = 0;
+	c->freelist = NULL;
+
+	/* build the BD Free list for the channel */
+	for (j = 0; j < NUM_TXCHAN_BD + 1; j++) {
+		struct cppi_descriptor	*bd;
+		dma_addr_t		dma;
+
+		bd = dma_pool_alloc(cppi->pool, GFP_KERNEL, &dma);
+		bd->dma = dma;
+		cppi_bd_free(c, bd);
+	}
+}
+
+static int cppi_channel_abort(struct dma_channel *);
+
+static void cppi_pool_free(struct cppi_channel *c)
+{
+	struct cppi		*cppi = c->controller;
+	struct cppi_descriptor	*bd;
+
+	(void) cppi_channel_abort(&c->channel);
+	c->channel.status = MUSB_DMA_STATUS_UNKNOWN;
+	c->controller = NULL;
+
+	/* free all its bds */
+	bd = c->last_processed;
+	do {
+		if (bd)
+			dma_pool_free(cppi->pool, bd, bd->dma);
+		bd = cppi_bd_alloc(c);
+	} while (bd);
+	c->last_processed = NULL;
+}
+
+static int __init cppi_controller_start(struct dma_controller *c)
+{
+	struct cppi	*controller;
+	void __iomem	*tibase;
+	int		i;
+
+	controller = container_of(c, struct cppi, controller);
+
+	/* do whatever is necessary to start controller */
+	for (i = 0; i < ARRAY_SIZE(controller->tx); i++) {
+		controller->tx[i].transmit = true;
+		controller->tx[i].index = i;
+	}
+	for (i = 0; i < ARRAY_SIZE(controller->rx); i++) {
+		controller->rx[i].transmit = false;
+		controller->rx[i].index = i;
+	}
+
+	/* setup BD list on a per channel basis */
+	for (i = 0; i < ARRAY_SIZE(controller->tx); i++)
+		cppi_pool_init(controller, controller->tx + i);
+	for (i = 0; i < ARRAY_SIZE(controller->rx); i++)
+		cppi_pool_init(controller, controller->rx + i);
+
+	tibase =  controller->tibase;
+	INIT_LIST_HEAD(&controller->tx_complete);
+
+	/* initialise tx/rx channel head pointers to zero */
+	for (i = 0; i < ARRAY_SIZE(controller->tx); i++) {
+		struct cppi_channel	*tx_ch = controller->tx + i;
+		struct cppi_tx_stateram __iomem *tx;
+
+		INIT_LIST_HEAD(&tx_ch->tx_complete);
+
+		tx = tibase + DAVINCI_TXCPPI_STATERAM_OFFSET(i);
+		tx_ch->state_ram = tx;
+		cppi_reset_tx(tx, 0);
+	}
+	for (i = 0; i < ARRAY_SIZE(controller->rx); i++) {
+		struct cppi_channel	*rx_ch = controller->rx + i;
+		struct cppi_rx_stateram __iomem *rx;
+
+		INIT_LIST_HEAD(&rx_ch->tx_complete);
+
+		rx = tibase + DAVINCI_RXCPPI_STATERAM_OFFSET(i);
+		rx_ch->state_ram = rx;
+		cppi_reset_rx(rx);
+	}
+
+	/* enable individual cppi channels */
+	musb_writel(tibase, DAVINCI_TXCPPI_INTENAB_REG,
+			DAVINCI_DMA_ALL_CHANNELS_ENABLE);
+	musb_writel(tibase, DAVINCI_RXCPPI_INTENAB_REG,
+			DAVINCI_DMA_ALL_CHANNELS_ENABLE);
+
+	/* enable tx/rx CPPI control */
+	musb_writel(tibase, DAVINCI_TXCPPI_CTRL_REG, DAVINCI_DMA_CTRL_ENABLE);
+	musb_writel(tibase, DAVINCI_RXCPPI_CTRL_REG, DAVINCI_DMA_CTRL_ENABLE);
+
+	/* disable RNDIS mode, also host rx RNDIS autorequest */
+	musb_writel(tibase, DAVINCI_RNDIS_REG, 0);
+	musb_writel(tibase, DAVINCI_AUTOREQ_REG, 0);
+
+	return 0;
+}
+
+/*
+ *  Stop DMA controller
+ *
+ *  De-Init the DMA controller as necessary.
+ */
+
+static int cppi_controller_stop(struct dma_controller *c)
+{
+	struct cppi		*controller;
+	void __iomem		*tibase;
+	int			i;
+
+	controller = container_of(c, struct cppi, controller);
+
+	tibase = controller->tibase;
+	/* DISABLE INDIVIDUAL CHANNEL Interrupts */
+	musb_writel(tibase, DAVINCI_TXCPPI_INTCLR_REG,
+			DAVINCI_DMA_ALL_CHANNELS_ENABLE);
+	musb_writel(tibase, DAVINCI_RXCPPI_INTCLR_REG,
+			DAVINCI_DMA_ALL_CHANNELS_ENABLE);
+
+	DBG(1, "Tearing down RX and TX Channels\n");
+	for (i = 0; i < ARRAY_SIZE(controller->tx); i++) {
+		/* FIXME restructure of txdma to use bds like rxdma */
+		controller->tx[i].last_processed = NULL;
+		cppi_pool_free(controller->tx + i);
+	}
+	for (i = 0; i < ARRAY_SIZE(controller->rx); i++)
+		cppi_pool_free(controller->rx + i);
+
+	/* in Tx Case proper teardown is supported. We resort to disabling
+	 * Tx/Rx CPPI after cleanup of Tx channels. Before TX teardown is
+	 * complete TX CPPI cannot be disabled.
+	 */
+	/*disable tx/rx cppi */
+	musb_writel(tibase, DAVINCI_TXCPPI_CTRL_REG, DAVINCI_DMA_CTRL_DISABLE);
+	musb_writel(tibase, DAVINCI_RXCPPI_CTRL_REG, DAVINCI_DMA_CTRL_DISABLE);
+
+	return 0;
+}
+
+/* While dma channel is allocated, we only want the core irqs active
+ * for fault reports, otherwise we'd get irqs that we don't care about.
+ * Except for TX irqs, where dma done != fifo empty and reusable ...
+ *
+ * NOTE: docs don't say either way, but irq masking **enables** irqs.
+ *
+ * REVISIT same issue applies to pure PIO usage too, and non-cppi dma...
+ */
+static inline void core_rxirq_disable(void __iomem *tibase, unsigned epnum)
+{
+	musb_writel(tibase, DAVINCI_USB_INT_MASK_CLR_REG, 1 << (epnum + 8));
+}
+
+static inline void core_rxirq_enable(void __iomem *tibase, unsigned epnum)
+{
+	musb_writel(tibase, DAVINCI_USB_INT_MASK_SET_REG, 1 << (epnum + 8));
+}
+
+
+/*
+ * Allocate a CPPI Channel for DMA.  With CPPI, channels are bound to
+ * each transfer direction of a non-control endpoint, so allocating
+ * (and deallocating) is mostly a way to notice bad housekeeping on
+ * the software side.  We assume the irqs are always active.
+ */
+static struct dma_channel *
+cppi_channel_allocate(struct dma_controller *c,
+		struct musb_hw_ep *ep, u8 transmit)
+{
+	struct cppi		*controller;
+	u8			index;
+	struct cppi_channel	*cppi_ch;
+	void __iomem		*tibase;
+
+	controller = container_of(c, struct cppi, controller);
+	tibase = controller->tibase;
+
+	/* ep0 doesn't use DMA; remember cppi indices are 0..N-1 */
+	index = ep->epnum - 1;
+
+	/* return the corresponding CPPI Channel Handle, and
+	 * probably disable the non-CPPI irq until we need it.
+	 */
+	if (transmit) {
+		if (index >= ARRAY_SIZE(controller->tx)) {
+			DBG(1, "no %cX%d CPPI channel\n", 'T', index);
+			return NULL;
+		}
+		cppi_ch = controller->tx + index;
+	} else {
+		if (index >= ARRAY_SIZE(controller->rx)) {
+			DBG(1, "no %cX%d CPPI channel\n", 'R', index);
+			return NULL;
+		}
+		cppi_ch = controller->rx + index;
+		core_rxirq_disable(tibase, ep->epnum);
+	}
+
+	/* REVISIT make this an error later once the same driver code works
+	 * with the other DMA engine too
+	 */
+	if (cppi_ch->hw_ep)
+		DBG(1, "re-allocating DMA%d %cX channel %p\n",
+				index, transmit ? 'T' : 'R', cppi_ch);
+	cppi_ch->hw_ep = ep;
+	cppi_ch->channel.status = MUSB_DMA_STATUS_FREE;
+
+	DBG(4, "Allocate CPPI%d %cX\n", index, transmit ? 'T' : 'R');
+	return &cppi_ch->channel;
+}
+
+/* Release a CPPI Channel.  */
+static void cppi_channel_release(struct dma_channel *channel)
+{
+	struct cppi_channel	*c;
+	void __iomem		*tibase;
+
+	/* REVISIT:  for paranoia, check state and abort if needed... */
+
+	c = container_of(channel, struct cppi_channel, channel);
+	tibase = c->controller->tibase;
+	if (!c->hw_ep)
+		DBG(1, "releasing idle DMA channel %p\n", c);
+	else if (!c->transmit)
+		core_rxirq_enable(tibase, c->index + 1);
+
+	/* for now, leave its cppi IRQ enabled (we won't trigger it) */
+	c->hw_ep = NULL;
+	channel->status = MUSB_DMA_STATUS_UNKNOWN;
+}
+
+/* Context: controller irqlocked */
+static void
+cppi_dump_rx(int level, struct cppi_channel *c, const char *tag)
+{
+	void __iomem			*base = c->controller->mregs;
+	struct cppi_rx_stateram __iomem	*rx = c->state_ram;
+
+	musb_ep_select(base, c->index + 1);
+
+	DBG(level, "RX DMA%d%s: %d left, csr %04x, "
+			"%08x H%08x S%08x C%08x, "
+			"B%08x L%08x %08x .. %08x"
+			"\n",
+		c->index, tag,
+		musb_readl(c->controller->tibase,
+			DAVINCI_RXCPPI_BUFCNT0_REG + 4 * c->index),
+		musb_readw(c->hw_ep->regs, MUSB_RXCSR),
+
+		musb_readl(&rx->rx_skipbytes, 0),
+		musb_readl(&rx->rx_head, 0),
+		musb_readl(&rx->rx_sop, 0),
+		musb_readl(&rx->rx_current, 0),
+
+		musb_readl(&rx->rx_buf_current, 0),
+		musb_readl(&rx->rx_len_len, 0),
+		musb_readl(&rx->rx_cnt_cnt, 0),
+		musb_readl(&rx->rx_complete, 0)
+		);
+}
+
+/* Context: controller irqlocked */
+static void
+cppi_dump_tx(int level, struct cppi_channel *c, const char *tag)
+{
+	void __iomem			*base = c->controller->mregs;
+	struct cppi_tx_stateram __iomem	*tx = c->state_ram;
+
+	musb_ep_select(base, c->index + 1);
+
+	DBG(level, "TX DMA%d%s: csr %04x, "
+			"H%08x S%08x C%08x %08x, "
+			"F%08x L%08x .. %08x"
+			"\n",
+		c->index, tag,
+		musb_readw(c->hw_ep->regs, MUSB_TXCSR),
+
+		musb_readl(&tx->tx_head, 0),
+		musb_readl(&tx->tx_buf, 0),
+		musb_readl(&tx->tx_current, 0),
+		musb_readl(&tx->tx_buf_current, 0),
+
+		musb_readl(&tx->tx_info, 0),
+		musb_readl(&tx->tx_rem_len, 0),
+		/* dummy/unused word 6 */
+		musb_readl(&tx->tx_complete, 0)
+		);
+}
+
+/* Context: controller irqlocked */
+static inline void
+cppi_rndis_update(struct cppi_channel *c, int is_rx,
+		void __iomem *tibase, int is_rndis)
+{
+	/* we may need to change the rndis flag for this cppi channel */
+	if (c->is_rndis != is_rndis) {
+		u32	value = musb_readl(tibase, DAVINCI_RNDIS_REG);
+		u32	temp = 1 << (c->index);
+
+		if (is_rx)
+			temp <<= 16;
+		if (is_rndis)
+			value |= temp;
+		else
+			value &= ~temp;
+		musb_writel(tibase, DAVINCI_RNDIS_REG, value);
+		c->is_rndis = is_rndis;
+	}
+}
+
+static void cppi_dump_rxbd(const char *tag, struct cppi_descriptor *bd)
+{
+	pr_debug("RXBD/%s %08x: "
+			"nxt %08x buf %08x off.blen %08x opt.plen %08x\n",
+			tag, bd->dma,
+			bd->hw_next, bd->hw_bufp, bd->hw_off_len,
+			bd->hw_options);
+}
+
+static void cppi_dump_rxq(int level, const char *tag, struct cppi_channel *rx)
+{
+#if MUSB_DEBUG > 0
+	struct cppi_descriptor	*bd;
+
+	if (!_dbg_level(level))
+		return;
+	cppi_dump_rx(level, rx, tag);
+	if (rx->last_processed)
+		cppi_dump_rxbd("last", rx->last_processed);
+	for (bd = rx->head; bd; bd = bd->next)
+		cppi_dump_rxbd("active", bd);
+#endif
+}
+
+
+/* NOTE:  DaVinci autoreq is ignored except for host side "RNDIS" mode RX;
+ * so we won't ever use it (see "CPPI RX Woes" below).
+ */
+static inline int cppi_autoreq_update(struct cppi_channel *rx,
+		void __iomem *tibase, int onepacket, unsigned n_bds)
+{
+	u32	val;
+
+#ifdef	RNDIS_RX_IS_USABLE
+	u32	tmp;
+	/* assert(is_host_active(musb)) */
+
+	/* start from "AutoReq never" */
+	tmp = musb_readl(tibase, DAVINCI_AUTOREQ_REG);
+	val = tmp & ~((0x3) << (rx->index * 2));
+
+	/* HCD arranged reqpkt for packet #1.  we arrange int
+	 * for all but the last one, maybe in two segments.
+	 */
+	if (!onepacket) {
+#if 0
+		/* use two segments, autoreq "all" then the last "never" */
+		val |= ((0x3) << (rx->index * 2));
+		n_bds--;
+#else
+		/* one segment, autoreq "all-but-last" */
+		val |= ((0x1) << (rx->index * 2));
+#endif
+	}
+
+	if (val != tmp) {
+		int n = 100;
+
+		/* make sure that autoreq is updated before continuing */
+		musb_writel(tibase, DAVINCI_AUTOREQ_REG, val);
+		do {
+			tmp = musb_readl(tibase, DAVINCI_AUTOREQ_REG);
+			if (tmp == val)
+				break;
+			cpu_relax();
+		} while (n-- > 0);
+	}
+#endif
+
+	/* REQPKT is turned off after each segment */
+	if (n_bds && rx->channel.actual_len) {
+		void __iomem	*regs = rx->hw_ep->regs;
+
+		val = musb_readw(regs, MUSB_RXCSR);
+		if (!(val & MUSB_RXCSR_H_REQPKT)) {
+			val |= MUSB_RXCSR_H_REQPKT | MUSB_RXCSR_H_WZC_BITS;
+			musb_writew(regs, MUSB_RXCSR, val);
+			/* flush writebufer */
+			val = musb_readw(regs, MUSB_RXCSR);
+		}
+	}
+	return n_bds;
+}
+
+
+/* Buffer enqueuing Logic:
+ *
+ *  - RX builds new queues each time, to help handle routine "early
+ *    termination" cases (faults, including errors and short reads)
+ *    more correctly.
+ *
+ *  - for now, TX reuses the same queue of BDs every time
+ *
+ * REVISIT long term, we want a normal dynamic model.
+ * ... the goal will be to append to the
+ * existing queue, processing completed "dma buffers" (segments) on the fly.
+ *
+ * Otherwise we force an IRQ latency between requests, which slows us a lot
+ * (especially in "transparent" dma).  Unfortunately that model seems to be
+ * inherent in the DMA model from the Mentor code, except in the rare case
+ * of transfers big enough (~128+ KB) that we could append "middle" segments
+ * in the TX paths.  (RX can't do this, see below.)
+ *
+ * That's true even in the CPPI- friendly iso case, where most urbs have
+ * several small segments provided in a group and where the "packet at a time"
+ * "transparent" DMA model is always correct, even on the RX side.
+ */
+
+/*
+ * CPPI TX:
+ * ========
+ * TX is a lot more reasonable than RX; it doesn't need to run in
+ * irq-per-packet mode very often.  RNDIS mode seems to behave too
+ * (except how it handles the exactly-N-packets case).  Building a
+ * txdma queue with multiple requests (urb or usb_request) looks
+ * like it would work ... but fault handling would need much testing.
+ *
+ * The main issue with TX mode RNDIS relates to transfer lengths that
+ * are an exact multiple of the packet length.  It appears that there's
+ * a hiccup in that case (maybe the DMA completes before the ZLP gets
+ * written?) boiling down to not being able to rely on CPPI writing any
+ * terminating zero length packet before the next transfer is written.
+ * So that's punted to PIO; better yet, gadget drivers can avoid it.
+ *
+ * Plus, there's allegedly an undocumented constraint that rndis transfer
+ * length be a multiple of 64 bytes ... but the chip doesn't act that
+ * way, and we really don't _want_ that behavior anyway.
+ *
+ * On TX, "transparent" mode works ... although experiments have shown
+ * problems trying to use the SOP/EOP bits in different USB packets.
+ *
+ * REVISIT try to handle terminating zero length packets using CPPI
+ * instead of doing it by PIO after an IRQ.  (Meanwhile, make Ethernet
+ * links avoid that issue by forcing them to avoid zlps.)
+ */
+static void
+cppi_next_tx_segment(struct musb *musb, struct cppi_channel *tx)
+{
+	unsigned		maxpacket = tx->maxpacket;
+	dma_addr_t		addr = tx->buf_dma + tx->offset;
+	size_t			length = tx->buf_len - tx->offset;
+	struct cppi_descriptor	*bd;
+	unsigned		n_bds;
+	unsigned		i;
+	struct cppi_tx_stateram	__iomem *tx_ram = tx->state_ram;
+	int			rndis;
+
+	/* TX can use the CPPI "rndis" mode, where we can probably fit this
+	 * transfer in one BD and one IRQ.  The only time we would NOT want
+	 * to use it is when hardware constraints prevent it, or if we'd
+	 * trigger the "send a ZLP?" confusion.
+	 */
+	rndis = (maxpacket & 0x3f) == 0
+		&& length < 0xffff
+		&& (length % maxpacket) != 0;
+
+	if (rndis) {
+		maxpacket = length;
+		n_bds = 1;
+	} else {
+		n_bds = length / maxpacket;
+		if (!length || (length % maxpacket))
+			n_bds++;
+		n_bds = min(n_bds, (unsigned) NUM_TXCHAN_BD);
+		length = min(n_bds * maxpacket, length);
+	}
+
+	DBG(4, "TX DMA%d, pktSz %d %s bds %d dma 0x%x len %u\n",
+			tx->index,
+			maxpacket,
+			rndis ? "rndis" : "transparent",
+			n_bds,
+			addr, length);
+
+	cppi_rndis_update(tx, 0, musb->ctrl_base, rndis);
+
+	/* assuming here that channel_program is called during
+	 * transfer initiation ... current code maintains state
+	 * for one outstanding request only (no queues, not even
+	 * the implicit ones of an iso urb).
+	 */
+
+	bd = tx->freelist;
+	tx->head = bd;
+	tx->last_processed = NULL;
+
+	/* FIXME use BD pool like RX side does, and just queue
+	 * the minimum number for this request.
+	 */
+
+	/* Prepare queue of BDs first, then hand it to hardware.
+	 * All BDs except maybe the last should be of full packet
+	 * size; for RNDIS there _is_ only that last packet.
+	 */
+	for (i = 0; i < n_bds; ) {
+		if (++i < n_bds && bd->next)
+			bd->hw_next = bd->next->dma;
+		else
+			bd->hw_next = 0;
+
+		bd->hw_bufp = tx->buf_dma + tx->offset;
+
+		/* FIXME set EOP only on the last packet,
+		 * SOP only on the first ... avoid IRQs
+		 */
+		if ((tx->offset + maxpacket) <= tx->buf_len) {
+			tx->offset += maxpacket;
+			bd->hw_off_len = maxpacket;
+			bd->hw_options = CPPI_SOP_SET | CPPI_EOP_SET
+				| CPPI_OWN_SET | maxpacket;
+		} else {
+			/* only this one may be a partial USB Packet */
+			u32		partial_len;
+
+			partial_len = tx->buf_len - tx->offset;
+			tx->offset = tx->buf_len;
+			bd->hw_off_len = partial_len;
+
+			bd->hw_options = CPPI_SOP_SET | CPPI_EOP_SET
+				| CPPI_OWN_SET | partial_len;
+			if (partial_len == 0)
+				bd->hw_options |= CPPI_ZERO_SET;
+		}
+
+		DBG(5, "TXBD %p: nxt %08x buf %08x len %04x opt %08x\n",
+				bd, bd->hw_next, bd->hw_bufp,
+				bd->hw_off_len, bd->hw_options);
+
+		/* update the last BD enqueued to the list */
+		tx->tail = bd;
+		bd = bd->next;
+	}
+
+	/* BDs live in DMA-coherent memory, but writes might be pending */
+	cpu_drain_writebuffer();
+
+	/* Write to the HeadPtr in state RAM to trigger */
+	musb_writel(&tx_ram->tx_head, 0, (u32)tx->freelist->dma);
+
+	cppi_dump_tx(5, tx, "/S");
+}
+
+/*
+ * CPPI RX Woes:
+ * =============
+ * Consider a 1KB bulk RX buffer in two scenarios:  (a) it's fed two 300 byte
+ * packets back-to-back, and (b) it's fed two 512 byte packets back-to-back.
+ * (Full speed transfers have similar scenarios.)
+ *
+ * The correct behavior for Linux is that (a) fills the buffer with 300 bytes,
+ * and the next packet goes into a buffer that's queued later; while (b) fills
+ * the buffer with 1024 bytes.  How to do that with CPPI?
+ *
+ * - RX queues in "rndis" mode -- one single BD -- handle (a) correctly, but
+ *   (b) loses **BADLY** because nothing (!) happens when that second packet
+ *   fills the buffer, much less when a third one arrives.  (Which makes this
+ *   not a "true" RNDIS mode.  In the RNDIS protocol short-packet termination
+ *   is optional, and it's fine if peripherals -- not hosts! -- pad messages
+ *   out to end-of-buffer.  Standard PCI host controller DMA descriptors
+ *   implement that mode by default ... which is no accident.)
+ *
+ * - RX queues in "transparent" mode -- two BDs with 512 bytes each -- have
+ *   converse problems:  (b) is handled right, but (a) loses badly.  CPPI RX
+ *   ignores SOP/EOP markings and processes both of those BDs; so both packets
+ *   are loaded into the buffer (with a 212 byte gap between them), and the next
+ *   buffer queued will NOT get its 300 bytes of data. (It seems like SOP/EOP
+ *   are intended as outputs for RX queues, not inputs...)
+ *
+ * - A variant of "transparent" mode -- one BD at a time -- is the only way to
+ *   reliably make both cases work, with software handling both cases correctly
+ *   and at the significant penalty of needing an IRQ per packet.  (The lack of
+ *   I/O overlap can be slightly ameliorated by enabling double buffering.)
+ *
+ * So how to get rid of IRQ-per-packet?  The transparent multi-BD case could
+ * be used in special cases like mass storage, which sets URB_SHORT_NOT_OK
+ * (or maybe its peripheral side counterpart) to flag (a) scenarios as errors
+ * with guaranteed driver level fault recovery and scrubbing out what's left
+ * of that garbaged datastream.
+ *
+ * But there seems to be no way to identify the cases where CPPI RNDIS mode
+ * is appropriate -- which do NOT include RNDIS host drivers, but do include
+ * the CDC Ethernet driver! -- and the documentation is incomplete/wrong.
+ * So we can't _ever_ use RX RNDIS mode ... except by using a heuristic
+ * that applies best on the peripheral side (and which could fail rudely).
+ *
+ * Leaving only "transparent" mode; we avoid multi-bd modes in almost all
+ * cases other than mass storage class.  Otherwise we're correct but slow,
+ * since CPPI penalizes our need for a "true RNDIS" default mode.
+ */
+
+
+/* Heuristic, intended to kick in for ethernet/rndis peripheral ONLY
+ *
+ * IFF
+ *  (a)	peripheral mode ... since rndis peripherals could pad their
+ *	writes to hosts, causing i/o failure; or we'd have to cope with
+ *	a largely unknowable variety of host side protocol variants
+ *  (b)	and short reads are NOT errors ... since full reads would
+ *	cause those same i/o failures
+ *  (c)	and read length is
+ *	- less than 64KB (max per cppi descriptor)
+ *	- not a multiple of 4096 (g_zero default, full reads typical)
+ *	- N (>1) packets long, ditto (full reads not EXPECTED)
+ * THEN
+ *   try rx rndis mode
+ *
+ * Cost of heuristic failing:  RXDMA wedges at the end of transfers that
+ * fill out the whole buffer.  Buggy host side usb network drivers could
+ * trigger that, but "in the field" such bugs seem to be all but unknown.
+ *
+ * So this module parameter lets the heuristic be disabled.  When using
+ * gadgetfs, the heuristic will probably need to be disabled.
+ */
+static int cppi_rx_rndis = 1;
+
+module_param(cppi_rx_rndis, bool, 0);
+MODULE_PARM_DESC(cppi_rx_rndis, "enable/disable RX RNDIS heuristic");
+
+
+/**
+ * cppi_next_rx_segment - dma read for the next chunk of a buffer
+ * @musb: the controller
+ * @rx: dma channel
+ * @onepacket: true unless caller treats short reads as errors, and
+ *	performs fault recovery above usbcore.
+ * Context: controller irqlocked
+ *
+ * See above notes about why we can't use multi-BD RX queues except in
+ * rare cases (mass storage class), and can never use the hardware "rndis"
+ * mode (since it's not a "true" RNDIS mode) with complete safety..
+ *
+ * It's ESSENTIAL that callers specify "onepacket" mode unless they kick in
+ * code to recover from corrupted datastreams after each short transfer.
+ */
+static void
+cppi_next_rx_segment(struct musb *musb, struct cppi_channel *rx, int onepacket)
+{
+	unsigned		maxpacket = rx->maxpacket;
+	dma_addr_t		addr = rx->buf_dma + rx->offset;
+	size_t			length = rx->buf_len - rx->offset;
+	struct cppi_descriptor	*bd, *tail;
+	unsigned		n_bds;
+	unsigned		i;
+	void __iomem		*tibase = musb->ctrl_base;
+	int			is_rndis = 0;
+	struct cppi_rx_stateram	__iomem *rx_ram = rx->state_ram;
+
+	if (onepacket) {
+		/* almost every USB driver, host or peripheral side */
+		n_bds = 1;
+
+		/* maybe apply the heuristic above */
+		if (cppi_rx_rndis
+				&& is_peripheral_active(musb)
+				&& length > maxpacket
+				&& (length & ~0xffff) == 0
+				&& (length & 0x0fff) != 0
+				&& (length & (maxpacket - 1)) == 0) {
+			maxpacket = length;
+			is_rndis = 1;
+		}
+	} else {
+		/* virtually nothing except mass storage class */
+		if (length > 0xffff) {
+			n_bds = 0xffff / maxpacket;
+			length = n_bds * maxpacket;
+		} else {
+			n_bds = length / maxpacket;
+			if (length % maxpacket)
+				n_bds++;
+		}
+		if (n_bds == 1)
+			onepacket = 1;
+		else
+			n_bds = min(n_bds, (unsigned) NUM_RXCHAN_BD);
+	}
+
+	/* In host mode, autorequest logic can generate some IN tokens; it's
+	 * tricky since we can't leave REQPKT set in RXCSR after the transfer
+	 * finishes. So:  multipacket transfers involve two or more segments.
+	 * And always at least two IRQs ... RNDIS mode is not an option.
+	 */
+	if (is_host_active(musb))
+		n_bds = cppi_autoreq_update(rx, tibase, onepacket, n_bds);
+
+	cppi_rndis_update(rx, 1, musb->ctrl_base, is_rndis);
+
+	length = min(n_bds * maxpacket, length);
+
+	DBG(4, "RX DMA%d seg, maxp %d %s bds %d (cnt %d) "
+			"dma 0x%x len %u %u/%u\n",
+			rx->index, maxpacket,
+			onepacket
+				? (is_rndis ? "rndis" : "onepacket")
+				: "multipacket",
+			n_bds,
+			musb_readl(tibase,
+				DAVINCI_RXCPPI_BUFCNT0_REG + (rx->index * 4))
+					& 0xffff,
+			addr, length, rx->channel.actual_len, rx->buf_len);
+
+	/* only queue one segment at a time, since the hardware prevents
+	 * correct queue shutdown after unexpected short packets
+	 */
+	bd = cppi_bd_alloc(rx);
+	rx->head = bd;
+
+	/* Build BDs for all packets in this segment */
+	for (i = 0, tail = NULL; bd && i < n_bds; i++, tail = bd) {
+		u32	bd_len;
+
+		if (i) {
+			bd = cppi_bd_alloc(rx);
+			if (!bd)
+				break;
+			tail->next = bd;
+			tail->hw_next = bd->dma;
+		}
+		bd->hw_next = 0;
+
+		/* all but the last packet will be maxpacket size */
+		if (maxpacket < length)
+			bd_len = maxpacket;
+		else
+			bd_len = length;
+
+		bd->hw_bufp = addr;
+		addr += bd_len;
+		rx->offset += bd_len;
+
+		bd->hw_off_len = (0 /*offset*/ << 16) + bd_len;
+		bd->buflen = bd_len;
+
+		bd->hw_options = CPPI_OWN_SET | (i == 0 ? length : 0);
+		length -= bd_len;
+	}
+
+	/* we always expect at least one reusable BD! */
+	if (!tail) {
+		WARNING("rx dma%d -- no BDs? need %d\n", rx->index, n_bds);
+		return;
+	} else if (i < n_bds)
+		WARNING("rx dma%d -- only %d of %d BDs\n", rx->index, i, n_bds);
+
+	tail->next = NULL;
+	tail->hw_next = 0;
+
+	bd = rx->head;
+	rx->tail = tail;
+
+	/* short reads and other faults should terminate this entire
+	 * dma segment.  we want one "dma packet" per dma segment, not
+	 * one per USB packet, terminating the whole queue at once...
+	 * NOTE that current hardware seems to ignore SOP and EOP.
+	 */
+	bd->hw_options |= CPPI_SOP_SET;
+	tail->hw_options |= CPPI_EOP_SET;
+
+	if (debug >= 5) {
+		struct cppi_descriptor	*d;
+
+		for (d = rx->head; d; d = d->next)
+			cppi_dump_rxbd("S", d);
+	}
+
+	/* in case the preceding transfer left some state... */
+	tail = rx->last_processed;
+	if (tail) {
+		tail->next = bd;
+		tail->hw_next = bd->dma;
+	}
+
+	core_rxirq_enable(tibase, rx->index + 1);
+
+	/* BDs live in DMA-coherent memory, but writes might be pending */
+	cpu_drain_writebuffer();
+
+	/* REVISIT specs say to write this AFTER the BUFCNT register
+	 * below ... but that loses badly.
+	 */
+	musb_writel(&rx_ram->rx_head, 0, bd->dma);
+
+	/* bufferCount must be at least 3, and zeroes on completion
+	 * unless it underflows below zero, or stops at two, or keeps
+	 * growing ... grr.
+	 */
+	i = musb_readl(tibase,
+			DAVINCI_RXCPPI_BUFCNT0_REG + (rx->index * 4))
+			& 0xffff;
+
+	if (!i)
+		musb_writel(tibase,
+			DAVINCI_RXCPPI_BUFCNT0_REG + (rx->index * 4),
+			n_bds + 2);
+	else if (n_bds > (i - 3))
+		musb_writel(tibase,
+			DAVINCI_RXCPPI_BUFCNT0_REG + (rx->index * 4),
+			n_bds - (i - 3));
+
+	i = musb_readl(tibase,
+			DAVINCI_RXCPPI_BUFCNT0_REG + (rx->index * 4))
+			& 0xffff;
+	if (i < (2 + n_bds)) {
+		DBG(2, "bufcnt%d underrun - %d (for %d)\n",
+					rx->index, i, n_bds);
+		musb_writel(tibase,
+			DAVINCI_RXCPPI_BUFCNT0_REG + (rx->index * 4),
+			n_bds + 2);
+	}
+
+	cppi_dump_rx(4, rx, "/S");
+}
+
+/**
+ * cppi_channel_program - program channel for data transfer
+ * @ch: the channel
+ * @maxpacket: max packet size
+ * @mode: For RX, 1 unless the usb protocol driver promised to treat
+ *	all short reads as errors and kick in high level fault recovery.
+ *	For TX, ignored because of RNDIS mode races/glitches.
+ * @dma_addr: dma address of buffer
+ * @len: length of buffer
+ * Context: controller irqlocked
+ */
+static int cppi_channel_program(struct dma_channel *ch,
+		u16 maxpacket, u8 mode,
+		dma_addr_t dma_addr, u32 len)
+{
+	struct cppi_channel	*cppi_ch;
+	struct cppi		*controller;
+	struct musb		*musb;
+
+	cppi_ch = container_of(ch, struct cppi_channel, channel);
+	controller = cppi_ch->controller;
+	musb = controller->musb;
+
+	switch (ch->status) {
+	case MUSB_DMA_STATUS_BUS_ABORT:
+	case MUSB_DMA_STATUS_CORE_ABORT:
+		/* fault irq handler should have handled cleanup */
+		WARNING("%cX DMA%d not cleaned up after abort!\n",
+				cppi_ch->transmit ? 'T' : 'R',
+				cppi_ch->index);
+		/* WARN_ON(1); */
+		break;
+	case MUSB_DMA_STATUS_BUSY:
+		WARNING("program active channel?  %cX DMA%d\n",
+				cppi_ch->transmit ? 'T' : 'R',
+				cppi_ch->index);
+		/* WARN_ON(1); */
+		break;
+	case MUSB_DMA_STATUS_UNKNOWN:
+		DBG(1, "%cX DMA%d not allocated!\n",
+				cppi_ch->transmit ? 'T' : 'R',
+				cppi_ch->index);
+		/* FALLTHROUGH */
+	case MUSB_DMA_STATUS_FREE:
+		break;
+	}
+
+	ch->status = MUSB_DMA_STATUS_BUSY;
+
+	/* set transfer parameters, then queue up its first segment */
+	cppi_ch->buf_dma = dma_addr;
+	cppi_ch->offset = 0;
+	cppi_ch->maxpacket = maxpacket;
+	cppi_ch->buf_len = len;
+
+	/* TX channel? or RX? */
+	if (cppi_ch->transmit)
+		cppi_next_tx_segment(musb, cppi_ch);
+	else
+		cppi_next_rx_segment(musb, cppi_ch, mode);
+
+	return true;
+}
+
+static bool cppi_rx_scan(struct cppi *cppi, unsigned ch)
+{
+	struct cppi_channel		*rx = &cppi->rx[ch];
+	struct cppi_rx_stateram __iomem	*state = rx->state_ram;
+	struct cppi_descriptor		*bd;
+	struct cppi_descriptor		*last = rx->last_processed;
+	bool				completed = false;
+	bool				acked = false;
+	int				i;
+	dma_addr_t			safe2ack;
+	void __iomem			*regs = rx->hw_ep->regs;
+
+	cppi_dump_rx(6, rx, "/K");
+
+	bd = last ? last->next : rx->head;
+	if (!bd)
+		return false;
+
+	/* run through all completed BDs */
+	for (i = 0, safe2ack = musb_readl(&state->rx_complete, 0);
+			(safe2ack || completed) && bd && i < NUM_RXCHAN_BD;
+			i++, bd = bd->next) {
+		u16	len;
+
+		/* catch latest BD writes from CPPI */
+		rmb();
+		if (!completed && (bd->hw_options & CPPI_OWN_SET))
+			break;
+
+		DBG(5, "C/RXBD %08x: nxt %08x buf %08x "
+			"off.len %08x opt.len %08x (%d)\n",
+			bd->dma, bd->hw_next, bd->hw_bufp,
+			bd->hw_off_len, bd->hw_options,
+			rx->channel.actual_len);
+
+		/* actual packet received length */
+		if ((bd->hw_options & CPPI_SOP_SET) && !completed)
+			len = bd->hw_off_len & CPPI_RECV_PKTLEN_MASK;
+		else
+			len = 0;
+
+		if (bd->hw_options & CPPI_EOQ_MASK)
+			completed = true;
+
+		if (!completed && len < bd->buflen) {
+			/* NOTE:  when we get a short packet, RXCSR_H_REQPKT
+			 * must have been cleared, and no more DMA packets may
+			 * active be in the queue... TI docs didn't say, but
+			 * CPPI ignores those BDs even though OWN is still set.
+			 */
+			completed = true;
+			DBG(3, "rx short %d/%d (%d)\n",
+					len, bd->buflen,
+					rx->channel.actual_len);
+		}
+
+		/* If we got here, we expect to ack at least one BD; meanwhile
+		 * CPPI may completing other BDs while we scan this list...
+		 *
+		 * RACE: we can notice OWN cleared before CPPI raises the
+		 * matching irq by writing that BD as the completion pointer.
+		 * In such cases, stop scanning and wait for the irq, avoiding
+		 * lost acks and states where BD ownership is unclear.
+		 */
+		if (bd->dma == safe2ack) {
+			musb_writel(&state->rx_complete, 0, safe2ack);
+			safe2ack = musb_readl(&state->rx_complete, 0);
+			acked = true;
+			if (bd->dma == safe2ack)
+				safe2ack = 0;
+		}
+
+		rx->channel.actual_len += len;
+
+		cppi_bd_free(rx, last);
+		last = bd;
+
+		/* stop scanning on end-of-segment */
+		if (bd->hw_next == 0)
+			completed = true;
+	}
+	rx->last_processed = last;
+
+	/* dma abort, lost ack, or ... */
+	if (!acked && last) {
+		int	csr;
+
+		if (safe2ack == 0 || safe2ack == rx->last_processed->dma)
+			musb_writel(&state->rx_complete, 0, safe2ack);
+		if (safe2ack == 0) {
+			cppi_bd_free(rx, last);
+			rx->last_processed = NULL;
+
+			/* if we land here on the host side, H_REQPKT will
+			 * be clear and we need to restart the queue...
+			 */
+			WARN_ON(rx->head);
+		}
+		musb_ep_select(cppi->mregs, rx->index + 1);
+		csr = musb_readw(regs, MUSB_RXCSR);
+		if (csr & MUSB_RXCSR_DMAENAB) {
+			DBG(4, "list%d %p/%p, last %08x%s, csr %04x\n",
+				rx->index,
+				rx->head, rx->tail,
+				rx->last_processed
+					? rx->last_processed->dma
+					: 0,
+				completed ? ", completed" : "",
+				csr);
+			cppi_dump_rxq(4, "/what?", rx);
+		}
+	}
+	if (!completed) {
+		int	csr;
+
+		rx->head = bd;
+
+		/* REVISIT seems like "autoreq all but EOP" doesn't...
+		 * setting it here "should" be racey, but seems to work
+		 */
+		csr = musb_readw(rx->hw_ep->regs, MUSB_RXCSR);
+		if (is_host_active(cppi->musb)
+				&& bd
+				&& !(csr & MUSB_RXCSR_H_REQPKT)) {
+			csr |= MUSB_RXCSR_H_REQPKT;
+			musb_writew(regs, MUSB_RXCSR,
+					MUSB_RXCSR_H_WZC_BITS | csr);
+			csr = musb_readw(rx->hw_ep->regs, MUSB_RXCSR);
+		}
+	} else {
+		rx->head = NULL;
+		rx->tail = NULL;
+	}
+
+	cppi_dump_rx(6, rx, completed ? "/completed" : "/cleaned");
+	return completed;
+}
+
+void cppi_completion(struct musb *musb, u32 rx, u32 tx)
+{
+	void __iomem		*tibase;
+	int			i, index;
+	struct cppi		*cppi;
+	struct musb_hw_ep	*hw_ep = NULL;
+
+	cppi = container_of(musb->dma_controller, struct cppi, controller);
+
+	tibase = musb->ctrl_base;
+
+	/* process TX channels */
+	for (index = 0; tx; tx = tx >> 1, index++) {
+		struct cppi_channel		*tx_ch;
+		struct cppi_tx_stateram __iomem	*tx_ram;
+		bool				completed = false;
+		struct cppi_descriptor		*bd;
+
+		if (!(tx & 1))
+			continue;
+
+		tx_ch = cppi->tx + index;
+		tx_ram = tx_ch->state_ram;
+
+		/* FIXME  need a cppi_tx_scan() routine, which
+		 * can also be called from abort code
+		 */
+
+		cppi_dump_tx(5, tx_ch, "/E");
+
+		bd = tx_ch->head;
+
+		if (NULL == bd) {
+			DBG(1, "null BD\n");
+			continue;
+		}
+
+		/* run through all completed BDs */
+		for (i = 0; !completed && bd && i < NUM_TXCHAN_BD;
+				i++, bd = bd->next) {
+			u16	len;
+
+			/* catch latest BD writes from CPPI */
+			rmb();
+			if (bd->hw_options & CPPI_OWN_SET)
+				break;
+
+			DBG(5, "C/TXBD %p n %x b %x off %x opt %x\n",
+					bd, bd->hw_next, bd->hw_bufp,
+					bd->hw_off_len, bd->hw_options);
+
+			len = bd->hw_off_len & CPPI_BUFFER_LEN_MASK;
+			tx_ch->channel.actual_len += len;
+
+			tx_ch->last_processed = bd;
+
+			/* write completion register to acknowledge
+			 * processing of completed BDs, and possibly
+			 * release the IRQ; EOQ might not be set ...
+			 *
+			 * REVISIT use the same ack strategy as rx
+			 *
+			 * REVISIT have observed bit 18 set; huh??
+			 */
+			/* if ((bd->hw_options & CPPI_EOQ_MASK)) */
+				musb_writel(&tx_ram->tx_complete, 0, bd->dma);
+
+			/* stop scanning on end-of-segment */
+			if (bd->hw_next == 0)
+				completed = true;
+		}
+
+		/* on end of segment, maybe go to next one */
+		if (completed) {
+			/* cppi_dump_tx(4, tx_ch, "/complete"); */
+
+			/* transfer more, or report completion */
+			if (tx_ch->offset >= tx_ch->buf_len) {
+				tx_ch->head = NULL;
+				tx_ch->tail = NULL;
+				tx_ch->channel.status = MUSB_DMA_STATUS_FREE;
+
+				hw_ep = tx_ch->hw_ep;
+
+				/* Peripheral role never repurposes the
+				 * endpoint, so immediate completion is
+				 * safe.  Host role waits for the fifo
+				 * to empty (TXPKTRDY irq) before going
+				 * to the next queued bulk transfer.
+				 */
+				if (is_host_active(cppi->musb)) {
+#if 0
+					/* WORKAROUND because we may
+					 * not always get TXKPTRDY ...
+					 */
+					int	csr;
+
+					csr = musb_readw(hw_ep->regs,
+						MUSB_TXCSR);
+					if (csr & MUSB_TXCSR_TXPKTRDY)
+#endif
+						completed = false;
+				}
+				if (completed)
+					musb_dma_completion(musb, index + 1, 1);
+
+			} else {
+				/* Bigger transfer than we could fit in
+				 * that first batch of descriptors...
+				 */
+				cppi_next_tx_segment(musb, tx_ch);
+			}
+		} else
+			tx_ch->head = bd;
+	}
+
+	/* Start processing the RX block */
+	for (index = 0; rx; rx = rx >> 1, index++) {
+
+		if (rx & 1) {
+			struct cppi_channel		*rx_ch;
+
+			rx_ch = cppi->rx + index;
+
+			/* let incomplete dma segments finish */
+			if (!cppi_rx_scan(cppi, index))
+				continue;
+
+			/* start another dma segment if needed */
+			if (rx_ch->channel.actual_len != rx_ch->buf_len
+					&& rx_ch->channel.actual_len
+						== rx_ch->offset) {
+				cppi_next_rx_segment(musb, rx_ch, 1);
+				continue;
+			}
+
+			/* all segments completed! */
+			rx_ch->channel.status = MUSB_DMA_STATUS_FREE;
+
+			hw_ep = rx_ch->hw_ep;
+
+			core_rxirq_disable(tibase, index + 1);
+			musb_dma_completion(musb, index + 1, 0);
+		}
+	}
+
+	/* write to CPPI EOI register to re-enable interrupts */
+	musb_writel(tibase, DAVINCI_CPPI_EOI_REG, 0);
+}
+
+/* Instantiate a software object representing a DMA controller. */
+struct dma_controller *__init
+dma_controller_create(struct musb *musb, void __iomem *mregs)
+{
+	struct cppi		*controller;
+
+	controller = kzalloc(sizeof *controller, GFP_KERNEL);
+	if (!controller)
+		return NULL;
+
+	controller->mregs = mregs;
+	controller->tibase = mregs - DAVINCI_BASE_OFFSET;
+
+	controller->musb = musb;
+	controller->controller.start = cppi_controller_start;
+	controller->controller.stop = cppi_controller_stop;
+	controller->controller.channel_alloc = cppi_channel_allocate;
+	controller->controller.channel_release = cppi_channel_release;
+	controller->controller.channel_program = cppi_channel_program;
+	controller->controller.channel_abort = cppi_channel_abort;
+
+	/* NOTE: allocating from on-chip SRAM would give the least
+	 * contention for memory access, if that ever matters here.
+	 */
+
+	/* setup BufferPool */
+	controller->pool = dma_pool_create("cppi",
+			controller->musb->controller,
+			sizeof(struct cppi_descriptor),
+			CPPI_DESCRIPTOR_ALIGN, 0);
+	if (!controller->pool) {
+		kfree(controller);
+		return NULL;
+	}
+
+	return &controller->controller;
+}
+
+/*
+ *  Destroy a previously-instantiated DMA controller.
+ */
+void dma_controller_destroy(struct dma_controller *c)
+{
+	struct cppi	*cppi;
+
+	cppi = container_of(c, struct cppi, controller);
+
+	/* assert:  caller stopped the controller first */
+	dma_pool_destroy(cppi->pool);
+
+	kfree(cppi);
+}
+
+/*
+ * Context: controller irqlocked, endpoint selected
+ */
+static int cppi_channel_abort(struct dma_channel *channel)
+{
+	struct cppi_channel	*cppi_ch;
+	struct cppi		*controller;
+	void __iomem		*mbase;
+	void __iomem		*tibase;
+	void __iomem		*regs;
+	u32			value;
+	struct cppi_descriptor	*queue;
+
+	cppi_ch = container_of(channel, struct cppi_channel, channel);
+
+	controller = cppi_ch->controller;
+
+	switch (channel->status) {
+	case MUSB_DMA_STATUS_BUS_ABORT:
+	case MUSB_DMA_STATUS_CORE_ABORT:
+		/* from RX or TX fault irq handler */
+	case MUSB_DMA_STATUS_BUSY:
+		/* the hardware needs shutting down */
+		regs = cppi_ch->hw_ep->regs;
+		break;
+	case MUSB_DMA_STATUS_UNKNOWN:
+	case MUSB_DMA_STATUS_FREE:
+		return 0;
+	default:
+		return -EINVAL;
+	}
+
+	if (!cppi_ch->transmit && cppi_ch->head)
+		cppi_dump_rxq(3, "/abort", cppi_ch);
+
+	mbase = controller->mregs;
+	tibase = controller->tibase;
+
+	queue = cppi_ch->head;
+	cppi_ch->head = NULL;
+	cppi_ch->tail = NULL;
+
+	/* REVISIT should rely on caller having done this,
+	 * and caller should rely on us not changing it.
+	 * peripheral code is safe ... check host too.
+	 */
+	musb_ep_select(mbase, cppi_ch->index + 1);
+
+	if (cppi_ch->transmit) {
+		struct cppi_tx_stateram __iomem *tx_ram;
+		int			enabled;
+
+		/* mask interrupts raised to signal teardown complete.  */
+		enabled = musb_readl(tibase, DAVINCI_TXCPPI_INTENAB_REG)
+				& (1 << cppi_ch->index);
+		if (enabled)
+			musb_writel(tibase, DAVINCI_TXCPPI_INTCLR_REG,
+					(1 << cppi_ch->index));
+
+		/* REVISIT put timeouts on these controller handshakes */
+
+		cppi_dump_tx(6, cppi_ch, " (teardown)");
+
+		/* teardown DMA engine then usb core */
+		do {
+			value = musb_readl(tibase, DAVINCI_TXCPPI_TEAR_REG);
+		} while (!(value & CPPI_TEAR_READY));
+		musb_writel(tibase, DAVINCI_TXCPPI_TEAR_REG, cppi_ch->index);
+
+		tx_ram = cppi_ch->state_ram;
+		do {
+			value = musb_readl(&tx_ram->tx_complete, 0);
+		} while (0xFFFFFFFC != value);
+		musb_writel(&tx_ram->tx_complete, 0, 0xFFFFFFFC);
+
+		/* FIXME clean up the transfer state ... here?
+		 * the completion routine should get called with
+		 * an appropriate status code.
+		 */
+
+		value = musb_readw(regs, MUSB_TXCSR);
+		value &= ~MUSB_TXCSR_DMAENAB;
+		value |= MUSB_TXCSR_FLUSHFIFO;
+		musb_writew(regs, MUSB_TXCSR, value);
+		musb_writew(regs, MUSB_TXCSR, value);
+
+		/* re-enable interrupt */
+		if (enabled)
+			musb_writel(tibase, DAVINCI_TXCPPI_INTENAB_REG,
+					(1 << cppi_ch->index));
+
+		/* While we scrub the TX state RAM, ensure that we clean
+		 * up any interrupt that's currently asserted:
+		 * 1. Write to completion Ptr value 0x1(bit 0 set)
+		 *    (write back mode)
+		 * 2. Write to completion Ptr value 0x0(bit 0 cleared)
+		 *    (compare mode)
+		 * Value written is compared(for bits 31:2) and when
+		 * equal, interrupt is deasserted.
+		 */
+		cppi_reset_tx(tx_ram, 1);
+		musb_writel(&tx_ram->tx_complete, 0, 0);
+
+		cppi_dump_tx(5, cppi_ch, " (done teardown)");
+
+		/* REVISIT tx side _should_ clean up the same way
+		 * as the RX side ... this does no cleanup at all!
+		 */
+
+	} else /* RX */ {
+		u16			csr;
+
+		/* NOTE: docs don't guarantee any of this works ...  we
+		 * expect that if the usb core stops telling the cppi core
+		 * to pull more data from it, then it'll be safe to flush
+		 * current RX DMA state iff any pending fifo transfer is done.
+		 */
+
+		core_rxirq_disable(tibase, cppi_ch->index + 1);
+
+		/* for host, ensure ReqPkt is never set again */
+		if (is_host_active(cppi_ch->controller->musb)) {
+			value = musb_readl(tibase, DAVINCI_AUTOREQ_REG);
+			value &= ~((0x3) << (cppi_ch->index * 2));
+			musb_writel(tibase, DAVINCI_AUTOREQ_REG, value);
+		}
+
+		csr = musb_readw(regs, MUSB_RXCSR);
+
+		/* for host, clear (just) ReqPkt at end of current packet(s) */
+		if (is_host_active(cppi_ch->controller->musb)) {
+			csr |= MUSB_RXCSR_H_WZC_BITS;
+			csr &= ~MUSB_RXCSR_H_REQPKT;
+		} else
+			csr |= MUSB_RXCSR_P_WZC_BITS;
+
+		/* clear dma enable */
+		csr &= ~(MUSB_RXCSR_DMAENAB);
+		musb_writew(regs, MUSB_RXCSR, csr);
+		csr = musb_readw(regs, MUSB_RXCSR);
+
+		/* Quiesce: wait for current dma to finish (if not cleanup).
+		 * We can't use bit zero of stateram->rx_sop, since that
+		 * refers to an entire "DMA packet" not just emptying the
+		 * current fifo.  Most segments need multiple usb packets.
+		 */
+		if (channel->status == MUSB_DMA_STATUS_BUSY)
+			udelay(50);
+
+		/* scan the current list, reporting any data that was
+		 * transferred and acking any IRQ
+		 */
+		cppi_rx_scan(controller, cppi_ch->index);
+
+		/* clobber the existing state once it's idle
+		 *
+		 * NOTE:  arguably, we should also wait for all the other
+		 * RX channels to quiesce (how??) and then temporarily
+		 * disable RXCPPI_CTRL_REG ... but it seems that we can
+		 * rely on the controller restarting from state ram, with
+		 * only RXCPPI_BUFCNT state being bogus.  BUFCNT will
+		 * correct itself after the next DMA transfer though.
+		 *
+		 * REVISIT does using rndis mode change that?
+		 */
+		cppi_reset_rx(cppi_ch->state_ram);
+
+		/* next DMA request _should_ load cppi head ptr */
+
+		/* ... we don't "free" that list, only mutate it in place.  */
+		cppi_dump_rx(5, cppi_ch, " (done abort)");
+
+		/* clean up previously pending bds */
+		cppi_bd_free(cppi_ch, cppi_ch->last_processed);
+		cppi_ch->last_processed = NULL;
+
+		while (queue) {
+			struct cppi_descriptor	*tmp = queue->next;
+
+			cppi_bd_free(cppi_ch, queue);
+			queue = tmp;
+		}
+	}
+
+	channel->status = MUSB_DMA_STATUS_FREE;
+	cppi_ch->buf_dma = 0;
+	cppi_ch->offset = 0;
+	cppi_ch->buf_len = 0;
+	cppi_ch->maxpacket = 0;
+	return 0;
+}
+
+/* TBD Queries:
+ *
+ * Power Management ... probably turn off cppi during suspend, restart;
+ * check state ram?  Clocking is presumably shared with usb core.
+ */
diff --git a/drivers/usb/musb/cppi_dma.h b/drivers/usb/musb/cppi_dma.h
new file mode 100644
index 000000000000..fc5216b5d2c5
--- /dev/null
+++ b/drivers/usb/musb/cppi_dma.h
@@ -0,0 +1,133 @@
+/* Copyright (C) 2005-2006 by Texas Instruments */
+
+#ifndef _CPPI_DMA_H_
+#define _CPPI_DMA_H_
+
+#include <linux/slab.h>
+#include <linux/list.h>
+#include <linux/smp_lock.h>
+#include <linux/errno.h>
+#include <linux/dmapool.h>
+
+#include "musb_dma.h"
+#include "musb_core.h"
+
+
+/* FIXME fully isolate CPPI from DaVinci ... the "CPPI generic" registers
+ * would seem to be shared with the TUSB6020 (over VLYNQ).
+ */
+
+#include "davinci.h"
+
+
+/* CPPI RX/TX state RAM */
+
+struct cppi_tx_stateram {
+	u32 tx_head;			/* "DMA packet" head descriptor */
+	u32 tx_buf;
+	u32 tx_current;			/* current descriptor */
+	u32 tx_buf_current;
+	u32 tx_info;			/* flags, remaining buflen */
+	u32 tx_rem_len;
+	u32 tx_dummy;			/* unused */
+	u32 tx_complete;
+};
+
+struct cppi_rx_stateram {
+	u32 rx_skipbytes;
+	u32 rx_head;
+	u32 rx_sop;			/* "DMA packet" head descriptor */
+	u32 rx_current;			/* current descriptor */
+	u32 rx_buf_current;
+	u32 rx_len_len;
+	u32 rx_cnt_cnt;
+	u32 rx_complete;
+};
+
+/* hw_options bits in CPPI buffer descriptors */
+#define CPPI_SOP_SET	((u32)(1 << 31))
+#define CPPI_EOP_SET	((u32)(1 << 30))
+#define CPPI_OWN_SET	((u32)(1 << 29))	/* owned by cppi */
+#define CPPI_EOQ_MASK	((u32)(1 << 28))
+#define CPPI_ZERO_SET	((u32)(1 << 23))	/* rx saw zlp; tx issues one */
+#define CPPI_RXABT_MASK	((u32)(1 << 19))	/* need more rx buffers */
+
+#define CPPI_RECV_PKTLEN_MASK 0xFFFF
+#define CPPI_BUFFER_LEN_MASK 0xFFFF
+
+#define CPPI_TEAR_READY ((u32)(1 << 31))
+
+/* CPPI data structure definitions */
+
+#define	CPPI_DESCRIPTOR_ALIGN	16	/* bytes; 5-dec docs say 4-byte align */
+
+struct cppi_descriptor {
+	/* hardware overlay */
+	u32		hw_next;	/* next buffer descriptor Pointer */
+	u32		hw_bufp;	/* i/o buffer pointer */
+	u32		hw_off_len;	/* buffer_offset16, buffer_length16 */
+	u32		hw_options;	/* flags:  SOP, EOP etc*/
+
+	struct cppi_descriptor *next;
+	dma_addr_t	dma;		/* address of this descriptor */
+	u32		buflen;		/* for RX: original buffer length */
+} __attribute__ ((aligned(CPPI_DESCRIPTOR_ALIGN)));
+
+
+struct cppi;
+
+/* CPPI  Channel Control structure */
+struct cppi_channel {
+	struct dma_channel	channel;
+
+	/* back pointer to the DMA controller structure */
+	struct cppi		*controller;
+
+	/* which direction of which endpoint? */
+	struct musb_hw_ep	*hw_ep;
+	bool			transmit;
+	u8			index;
+
+	/* DMA modes:  RNDIS or "transparent" */
+	u8			is_rndis;
+
+	/* book keeping for current transfer request */
+	dma_addr_t		buf_dma;
+	u32			buf_len;
+	u32			maxpacket;
+	u32			offset;		/* dma requested */
+
+	void __iomem		*state_ram;	/* CPPI state */
+
+	struct cppi_descriptor	*freelist;
+
+	/* BD management fields */
+	struct cppi_descriptor	*head;
+	struct cppi_descriptor	*tail;
+	struct cppi_descriptor	*last_processed;
+
+	/* use tx_complete in host role to track endpoints waiting for
+	 * FIFONOTEMPTY to clear.
+	 */
+	struct list_head	tx_complete;
+};
+
+/* CPPI DMA controller object */
+struct cppi {
+	struct dma_controller		controller;
+	struct musb			*musb;
+	void __iomem			*mregs;		/* Mentor regs */
+	void __iomem			*tibase;	/* TI/CPPI regs */
+
+	struct cppi_channel		tx[MUSB_C_NUM_EPT - 1];
+	struct cppi_channel		rx[MUSB_C_NUM_EPR - 1];
+
+	struct dma_pool			*pool;
+
+	struct list_head		tx_complete;
+};
+
+/* irq handling hook */
+extern void cppi_completion(struct musb *, u32 rx, u32 tx);
+
+#endif				/* end of ifndef _CPPI_DMA_H_ */
diff --git a/drivers/usb/musb/davinci.c b/drivers/usb/musb/davinci.c
new file mode 100644
index 000000000000..75baf181a8cd
--- /dev/null
+++ b/drivers/usb/musb/davinci.c
@@ -0,0 +1,462 @@
+/*
+ * Copyright (C) 2005-2006 by Texas Instruments
+ *
+ * This file is part of the Inventra Controller Driver for Linux.
+ *
+ * The Inventra Controller Driver for Linux is free software; you
+ * can redistribute it and/or modify it under the terms of the GNU
+ * General Public License version 2 as published by the Free Software
+ * Foundation.
+ *
+ * The Inventra Controller Driver for Linux is distributed in
+ * the hope that it will be useful, but WITHOUT ANY WARRANTY;
+ * without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public
+ * License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with The Inventra Controller Driver for Linux ; if not,
+ * write to the Free Software Foundation, Inc., 59 Temple Place,
+ * Suite 330, Boston, MA  02111-1307  USA
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/slab.h>
+#include <linux/init.h>
+#include <linux/list.h>
+#include <linux/delay.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+
+#include <asm/arch/hardware.h>
+#include <asm/arch/memory.h>
+#include <asm/arch/gpio.h>
+#include <asm/mach-types.h>
+
+#include "musb_core.h"
+
+#ifdef CONFIG_MACH_DAVINCI_EVM
+#include <asm/arch/i2c-client.h>
+#endif
+
+#include "davinci.h"
+#include "cppi_dma.h"
+
+
+/* REVISIT (PM) we should be able to keep the PHY in low power mode most
+ * of the time (24 MHZ oscillator and PLL off, etc) by setting POWER.D0
+ * and, when in host mode, autosuspending idle root ports... PHYPLLON
+ * (overriding SUSPENDM?) then likely needs to stay off.
+ */
+
+static inline void phy_on(void)
+{
+	/* start the on-chip PHY and its PLL */
+	__raw_writel(USBPHY_SESNDEN | USBPHY_VBDTCTEN | USBPHY_PHYPLLON,
+			(void __force __iomem *) IO_ADDRESS(USBPHY_CTL_PADDR));
+	while ((__raw_readl((void __force __iomem *)
+				IO_ADDRESS(USBPHY_CTL_PADDR))
+			& USBPHY_PHYCLKGD) == 0)
+		cpu_relax();
+}
+
+static inline void phy_off(void)
+{
+	/* powerdown the on-chip PHY and its oscillator */
+	__raw_writel(USBPHY_OSCPDWN | USBPHY_PHYPDWN, (void __force __iomem *)
+			IO_ADDRESS(USBPHY_CTL_PADDR));
+}
+
+static int dma_off = 1;
+
+void musb_platform_enable(struct musb *musb)
+{
+	u32	tmp, old, val;
+
+	/* workaround:  setup irqs through both register sets */
+	tmp = (musb->epmask & DAVINCI_USB_TX_ENDPTS_MASK)
+			<< DAVINCI_USB_TXINT_SHIFT;
+	musb_writel(musb->ctrl_base, DAVINCI_USB_INT_MASK_SET_REG, tmp);
+	old = tmp;
+	tmp = (musb->epmask & (0xfffe & DAVINCI_USB_RX_ENDPTS_MASK))
+			<< DAVINCI_USB_RXINT_SHIFT;
+	musb_writel(musb->ctrl_base, DAVINCI_USB_INT_MASK_SET_REG, tmp);
+	tmp |= old;
+
+	val = ~MUSB_INTR_SOF;
+	tmp |= ((val & 0x01ff) << DAVINCI_USB_USBINT_SHIFT);
+	musb_writel(musb->ctrl_base, DAVINCI_USB_INT_MASK_SET_REG, tmp);
+
+	if (is_dma_capable() && !dma_off)
+		printk(KERN_WARNING "%s %s: dma not reactivated\n",
+				__FILE__, __func__);
+	else
+		dma_off = 0;
+
+	/* force a DRVVBUS irq so we can start polling for ID change */
+	if (is_otg_enabled(musb))
+		musb_writel(musb->ctrl_base, DAVINCI_USB_INT_SET_REG,
+			DAVINCI_INTR_DRVVBUS << DAVINCI_USB_USBINT_SHIFT);
+}
+
+/*
+ * Disable the HDRC and flush interrupts
+ */
+void musb_platform_disable(struct musb *musb)
+{
+	/* because we don't set CTRLR.UINT, "important" to:
+	 *  - not read/write INTRUSB/INTRUSBE
+	 *  - (except during initial setup, as workaround)
+	 *  - use INTSETR/INTCLRR instead
+	 */
+	musb_writel(musb->ctrl_base, DAVINCI_USB_INT_MASK_CLR_REG,
+			  DAVINCI_USB_USBINT_MASK
+			| DAVINCI_USB_TXINT_MASK
+			| DAVINCI_USB_RXINT_MASK);
+	musb_writeb(musb->mregs, MUSB_DEVCTL, 0);
+	musb_writel(musb->ctrl_base, DAVINCI_USB_EOI_REG, 0);
+
+	if (is_dma_capable() && !dma_off)
+		WARNING("dma still active\n");
+}
+
+
+/* REVISIT it's not clear whether DaVinci can support full OTG.  */
+
+static int vbus_state = -1;
+
+#ifdef CONFIG_USB_MUSB_HDRC_HCD
+#define	portstate(stmt)		stmt
+#else
+#define	portstate(stmt)
+#endif
+
+
+/* VBUS SWITCHING IS BOARD-SPECIFIC */
+
+#ifdef CONFIG_MACH_DAVINCI_EVM
+#ifndef CONFIG_MACH_DAVINCI_EVM_OTG
+
+/* I2C operations are always synchronous, and require a task context.
+ * With unloaded systems, using the shared workqueue seems to suffice
+ * to satisfy the 100msec A_WAIT_VRISE timeout...
+ */
+static void evm_deferred_drvvbus(struct work_struct *ignored)
+{
+	davinci_i2c_expander_op(0x3a, USB_DRVVBUS, vbus_state);
+	vbus_state = !vbus_state;
+}
+static DECLARE_WORK(evm_vbus_work, evm_deferred_drvvbus);
+
+#endif	/* modified board */
+#endif	/* EVM */
+
+static void davinci_source_power(struct musb *musb, int is_on, int immediate)
+{
+	if (is_on)
+		is_on = 1;
+
+	if (vbus_state == is_on)
+		return;
+	vbus_state = !is_on;		/* 0/1 vs "-1 == unknown/init" */
+
+#ifdef CONFIG_MACH_DAVINCI_EVM
+	if (machine_is_davinci_evm()) {
+#ifdef CONFIG_MACH_DAVINCI_EVM_OTG
+		/* modified EVM board switching VBUS with GPIO(6) not I2C
+		 * NOTE:  PINMUX0.RGB888 (bit23) must be clear
+		 */
+		if (is_on)
+			gpio_set(GPIO(6));
+		else
+			gpio_clear(GPIO(6));
+		immediate = 1;
+#else
+		if (immediate)
+			davinci_i2c_expander_op(0x3a, USB_DRVVBUS, !is_on);
+		else
+			schedule_work(&evm_vbus_work);
+#endif
+	}
+#endif
+	if (immediate)
+		vbus_state = is_on;
+}
+
+static void davinci_set_vbus(struct musb *musb, int is_on)
+{
+	WARN_ON(is_on && is_peripheral_active(musb));
+	davinci_source_power(musb, is_on, 0);
+}
+
+
+#define	POLL_SECONDS	2
+
+static struct timer_list otg_workaround;
+
+static void otg_timer(unsigned long _musb)
+{
+	struct musb		*musb = (void *)_musb;
+	void __iomem		*mregs = musb->mregs;
+	u8			devctl;
+	unsigned long		flags;
+
+	/* We poll because DaVinci's won't expose several OTG-critical
+	* status change events (from the transceiver) otherwise.
+	 */
+	devctl = musb_readb(mregs, MUSB_DEVCTL);
+	DBG(7, "poll devctl %02x (%s)\n", devctl, otg_state_string(musb));
+
+	spin_lock_irqsave(&musb->lock, flags);
+	switch (musb->xceiv.state) {
+	case OTG_STATE_A_WAIT_VFALL:
+		/* Wait till VBUS falls below SessionEnd (~0.2V); the 1.3 RTL
+		 * seems to mis-handle session "start" otherwise (or in our
+		 * case "recover"), in routine "VBUS was valid by the time
+		 * VBUSERR got reported during enumeration" cases.
+		 */
+		if (devctl & MUSB_DEVCTL_VBUS) {
+			mod_timer(&otg_workaround, jiffies + POLL_SECONDS * HZ);
+			break;
+		}
+		musb->xceiv.state = OTG_STATE_A_WAIT_VRISE;
+		musb_writel(musb->ctrl_base, DAVINCI_USB_INT_SET_REG,
+			MUSB_INTR_VBUSERROR << DAVINCI_USB_USBINT_SHIFT);
+		break;
+	case OTG_STATE_B_IDLE:
+		if (!is_peripheral_enabled(musb))
+			break;
+
+		/* There's no ID-changed IRQ, so we have no good way to tell
+		 * when to switch to the A-Default state machine (by setting
+		 * the DEVCTL.SESSION flag).
+		 *
+		 * Workaround:  whenever we're in B_IDLE, try setting the
+		 * session flag every few seconds.  If it works, ID was
+		 * grounded and we're now in the A-Default state machine.
+		 *
+		 * NOTE setting the session flag is _supposed_ to trigger
+		 * SRP, but clearly it doesn't.
+		 */
+		musb_writeb(mregs, MUSB_DEVCTL,
+				devctl | MUSB_DEVCTL_SESSION);
+		devctl = musb_readb(mregs, MUSB_DEVCTL);
+		if (devctl & MUSB_DEVCTL_BDEVICE)
+			mod_timer(&otg_workaround, jiffies + POLL_SECONDS * HZ);
+		else
+			musb->xceiv.state = OTG_STATE_A_IDLE;
+		break;
+	default:
+		break;
+	}
+	spin_unlock_irqrestore(&musb->lock, flags);
+}
+
+static irqreturn_t davinci_interrupt(int irq, void *__hci)
+{
+	unsigned long	flags;
+	irqreturn_t	retval = IRQ_NONE;
+	struct musb	*musb = __hci;
+	void __iomem	*tibase = musb->ctrl_base;
+	u32		tmp;
+
+	spin_lock_irqsave(&musb->lock, flags);
+
+	/* NOTE: DaVinci shadows the Mentor IRQs.  Don't manage them through
+	 * the Mentor registers (except for setup), use the TI ones and EOI.
+	 *
+	 * Docs describe irq "vector" registers asociated with the CPPI and
+	 * USB EOI registers.  These hold a bitmask corresponding to the
+	 * current IRQ, not an irq handler address.  Would using those bits
+	 * resolve some of the races observed in this dispatch code??
+	 */
+
+	/* CPPI interrupts share the same IRQ line, but have their own
+	 * mask, state, "vector", and EOI registers.
+	 */
+	if (is_cppi_enabled()) {
+		u32 cppi_tx = musb_readl(tibase, DAVINCI_TXCPPI_MASKED_REG);
+		u32 cppi_rx = musb_readl(tibase, DAVINCI_RXCPPI_MASKED_REG);
+
+		if (cppi_tx || cppi_rx) {
+			DBG(4, "CPPI IRQ t%x r%x\n", cppi_tx, cppi_rx);
+			cppi_completion(musb, cppi_rx, cppi_tx);
+			retval = IRQ_HANDLED;
+		}
+	}
+
+	/* ack and handle non-CPPI interrupts */
+	tmp = musb_readl(tibase, DAVINCI_USB_INT_SRC_MASKED_REG);
+	musb_writel(tibase, DAVINCI_USB_INT_SRC_CLR_REG, tmp);
+	DBG(4, "IRQ %08x\n", tmp);
+
+	musb->int_rx = (tmp & DAVINCI_USB_RXINT_MASK)
+			>> DAVINCI_USB_RXINT_SHIFT;
+	musb->int_tx = (tmp & DAVINCI_USB_TXINT_MASK)
+			>> DAVINCI_USB_TXINT_SHIFT;
+	musb->int_usb = (tmp & DAVINCI_USB_USBINT_MASK)
+			>> DAVINCI_USB_USBINT_SHIFT;
+
+	/* DRVVBUS irqs are the only proxy we have (a very poor one!) for
+	 * DaVinci's missing ID change IRQ.  We need an ID change IRQ to
+	 * switch appropriately between halves of the OTG state machine.
+	 * Managing DEVCTL.SESSION per Mentor docs requires we know its
+	 * value, but DEVCTL.BDEVICE is invalid without DEVCTL.SESSION set.
+	 * Also, DRVVBUS pulses for SRP (but not at 5V) ...
+	 */
+	if (tmp & (DAVINCI_INTR_DRVVBUS << DAVINCI_USB_USBINT_SHIFT)) {
+		int	drvvbus = musb_readl(tibase, DAVINCI_USB_STAT_REG);
+		void __iomem *mregs = musb->mregs;
+		u8	devctl = musb_readb(mregs, MUSB_DEVCTL);
+		int	err = musb->int_usb & MUSB_INTR_VBUSERROR;
+
+		err = is_host_enabled(musb)
+				&& (musb->int_usb & MUSB_INTR_VBUSERROR);
+		if (err) {
+			/* The Mentor core doesn't debounce VBUS as needed
+			 * to cope with device connect current spikes. This
+			 * means it's not uncommon for bus-powered devices
+			 * to get VBUS errors during enumeration.
+			 *
+			 * This is a workaround, but newer RTL from Mentor
+			 * seems to allow a better one: "re"starting sessions
+			 * without waiting (on EVM, a **long** time) for VBUS
+			 * to stop registering in devctl.
+			 */
+			musb->int_usb &= ~MUSB_INTR_VBUSERROR;
+			musb->xceiv.state = OTG_STATE_A_WAIT_VFALL;
+			mod_timer(&otg_workaround, jiffies + POLL_SECONDS * HZ);
+			WARNING("VBUS error workaround (delay coming)\n");
+		} else if (is_host_enabled(musb) && drvvbus) {
+			musb->is_active = 1;
+			MUSB_HST_MODE(musb);
+			musb->xceiv.default_a = 1;
+			musb->xceiv.state = OTG_STATE_A_WAIT_VRISE;
+			portstate(musb->port1_status |= USB_PORT_STAT_POWER);
+			del_timer(&otg_workaround);
+		} else {
+			musb->is_active = 0;
+			MUSB_DEV_MODE(musb);
+			musb->xceiv.default_a = 0;
+			musb->xceiv.state = OTG_STATE_B_IDLE;
+			portstate(musb->port1_status &= ~USB_PORT_STAT_POWER);
+		}
+
+		/* NOTE:  this must complete poweron within 100 msec */
+		davinci_source_power(musb, drvvbus, 0);
+		DBG(2, "VBUS %s (%s)%s, devctl %02x\n",
+				drvvbus ? "on" : "off",
+				otg_state_string(musb),
+				err ? " ERROR" : "",
+				devctl);
+		retval = IRQ_HANDLED;
+	}
+
+	if (musb->int_tx || musb->int_rx || musb->int_usb)
+		retval |= musb_interrupt(musb);
+
+	/* irq stays asserted until EOI is written */
+	musb_writel(tibase, DAVINCI_USB_EOI_REG, 0);
+
+	/* poll for ID change */
+	if (is_otg_enabled(musb)
+			&& musb->xceiv.state == OTG_STATE_B_IDLE)
+		mod_timer(&otg_workaround, jiffies + POLL_SECONDS * HZ);
+
+	spin_unlock_irqrestore(&musb->lock, flags);
+
+	/* REVISIT we sometimes get unhandled IRQs
+	 * (e.g. ep0).  not clear why...
+	 */
+	if (retval != IRQ_HANDLED)
+		DBG(5, "unhandled? %08x\n", tmp);
+	return IRQ_HANDLED;
+}
+
+int __init musb_platform_init(struct musb *musb)
+{
+	void __iomem	*tibase = musb->ctrl_base;
+	u32		revision;
+
+	musb->mregs += DAVINCI_BASE_OFFSET;
+#if 0
+	/* REVISIT there's something odd about clocking, this
+	 * didn't appear do the job ...
+	 */
+	musb->clock = clk_get(pDevice, "usb");
+	if (IS_ERR(musb->clock))
+		return PTR_ERR(musb->clock);
+
+	status = clk_enable(musb->clock);
+	if (status < 0)
+		return -ENODEV;
+#endif
+
+	/* returns zero if e.g. not clocked */
+	revision = musb_readl(tibase, DAVINCI_USB_VERSION_REG);
+	if (revision == 0)
+		return -ENODEV;
+
+	if (is_host_enabled(musb))
+		setup_timer(&otg_workaround, otg_timer, (unsigned long) musb);
+
+	musb->board_set_vbus = davinci_set_vbus;
+	davinci_source_power(musb, 0, 1);
+
+	/* reset the controller */
+	musb_writel(tibase, DAVINCI_USB_CTRL_REG, 0x1);
+
+	/* start the on-chip PHY and its PLL */
+	phy_on();
+
+	msleep(5);
+
+	/* NOTE:  irqs are in mixed mode, not bypass to pure-musb */
+	pr_debug("DaVinci OTG revision %08x phy %03x control %02x\n",
+		revision, __raw_readl((void __force __iomem *)
+				IO_ADDRESS(USBPHY_CTL_PADDR)),
+		musb_readb(tibase, DAVINCI_USB_CTRL_REG));
+
+	musb->isr = davinci_interrupt;
+	return 0;
+}
+
+int musb_platform_exit(struct musb *musb)
+{
+	if (is_host_enabled(musb))
+		del_timer_sync(&otg_workaround);
+
+	davinci_source_power(musb, 0 /*off*/, 1);
+
+	/* delay, to avoid problems with module reload */
+	if (is_host_enabled(musb) && musb->xceiv.default_a) {
+		int	maxdelay = 30;
+		u8	devctl, warn = 0;
+
+		/* if there's no peripheral connected, this can take a
+		 * long time to fall, especially on EVM with huge C133.
+		 */
+		do {
+			devctl = musb_readb(musb->mregs, MUSB_DEVCTL);
+			if (!(devctl & MUSB_DEVCTL_VBUS))
+				break;
+			if ((devctl & MUSB_DEVCTL_VBUS) != warn) {
+				warn = devctl & MUSB_DEVCTL_VBUS;
+				DBG(1, "VBUS %d\n",
+					warn >> MUSB_DEVCTL_VBUS_SHIFT);
+			}
+			msleep(1000);
+			maxdelay--;
+		} while (maxdelay > 0);
+
+		/* in OTG mode, another host might be connected */
+		if (devctl & MUSB_DEVCTL_VBUS)
+			DBG(1, "VBUS off timeout (devctl %02x)\n", devctl);
+	}
+
+	phy_off();
+	return 0;
+}
diff --git a/drivers/usb/musb/davinci.h b/drivers/usb/musb/davinci.h
new file mode 100644
index 000000000000..7fb6238e270f
--- /dev/null
+++ b/drivers/usb/musb/davinci.h
@@ -0,0 +1,100 @@
+/*
+ * Copyright (C) 2005-2006 by Texas Instruments
+ *
+ * The Inventra Controller Driver for Linux is free software; you
+ * can redistribute it and/or modify it under the terms of the GNU
+ * General Public License version 2 as published by the Free Software
+ * Foundation.
+ */
+
+#ifndef __MUSB_HDRDF_H__
+#define __MUSB_HDRDF_H__
+
+/*
+ * DaVinci-specific definitions
+ */
+
+/* Integrated highspeed/otg PHY */
+#define	USBPHY_CTL_PADDR	(DAVINCI_SYSTEM_MODULE_BASE + 0x34)
+#define	USBPHY_PHYCLKGD		(1 << 8)
+#define	USBPHY_SESNDEN		(1 << 7)	/* v(sess_end) comparator */
+#define	USBPHY_VBDTCTEN		(1 << 6)	/* v(bus) comparator */
+#define	USBPHY_PHYPLLON		(1 << 4)	/* override pll suspend */
+#define	USBPHY_CLKO1SEL		(1 << 3)
+#define	USBPHY_OSCPDWN		(1 << 2)
+#define	USBPHY_PHYPDWN		(1 << 0)
+
+/* For now include usb OTG module registers here */
+#define DAVINCI_USB_VERSION_REG		0x00
+#define DAVINCI_USB_CTRL_REG		0x04
+#define DAVINCI_USB_STAT_REG		0x08
+#define DAVINCI_RNDIS_REG		0x10
+#define DAVINCI_AUTOREQ_REG		0x14
+#define DAVINCI_USB_INT_SOURCE_REG	0x20
+#define DAVINCI_USB_INT_SET_REG		0x24
+#define DAVINCI_USB_INT_SRC_CLR_REG	0x28
+#define DAVINCI_USB_INT_MASK_REG	0x2c
+#define DAVINCI_USB_INT_MASK_SET_REG	0x30
+#define DAVINCI_USB_INT_MASK_CLR_REG	0x34
+#define DAVINCI_USB_INT_SRC_MASKED_REG	0x38
+#define DAVINCI_USB_EOI_REG		0x3c
+#define DAVINCI_USB_EOI_INTVEC		0x40
+
+/* BEGIN CPPI-generic (?) */
+
+/* CPPI related registers */
+#define DAVINCI_TXCPPI_CTRL_REG		0x80
+#define DAVINCI_TXCPPI_TEAR_REG		0x84
+#define DAVINCI_CPPI_EOI_REG		0x88
+#define DAVINCI_CPPI_INTVEC_REG		0x8c
+#define DAVINCI_TXCPPI_MASKED_REG	0x90
+#define DAVINCI_TXCPPI_RAW_REG		0x94
+#define DAVINCI_TXCPPI_INTENAB_REG	0x98
+#define DAVINCI_TXCPPI_INTCLR_REG	0x9c
+
+#define DAVINCI_RXCPPI_CTRL_REG		0xC0
+#define DAVINCI_RXCPPI_MASKED_REG	0xD0
+#define DAVINCI_RXCPPI_RAW_REG		0xD4
+#define DAVINCI_RXCPPI_INTENAB_REG	0xD8
+#define DAVINCI_RXCPPI_INTCLR_REG	0xDC
+
+#define DAVINCI_RXCPPI_BUFCNT0_REG	0xE0
+#define DAVINCI_RXCPPI_BUFCNT1_REG	0xE4
+#define DAVINCI_RXCPPI_BUFCNT2_REG	0xE8
+#define DAVINCI_RXCPPI_BUFCNT3_REG	0xEC
+
+/* CPPI state RAM entries */
+#define DAVINCI_CPPI_STATERAM_BASE_OFFSET   0x100
+
+#define DAVINCI_TXCPPI_STATERAM_OFFSET(chnum) \
+	(DAVINCI_CPPI_STATERAM_BASE_OFFSET +       ((chnum) * 0x40))
+#define DAVINCI_RXCPPI_STATERAM_OFFSET(chnum) \
+	(DAVINCI_CPPI_STATERAM_BASE_OFFSET + 0x20 + ((chnum) * 0x40))
+
+/* CPPI masks */
+#define DAVINCI_DMA_CTRL_ENABLE		1
+#define DAVINCI_DMA_CTRL_DISABLE	0
+
+#define DAVINCI_DMA_ALL_CHANNELS_ENABLE	0xF
+#define DAVINCI_DMA_ALL_CHANNELS_DISABLE 0xF
+
+/* END CPPI-generic (?) */
+
+#define DAVINCI_USB_TX_ENDPTS_MASK	0x1f		/* ep0 + 4 tx */
+#define DAVINCI_USB_RX_ENDPTS_MASK	0x1e		/* 4 rx */
+
+#define DAVINCI_USB_USBINT_SHIFT	16
+#define DAVINCI_USB_TXINT_SHIFT		0
+#define DAVINCI_USB_RXINT_SHIFT		8
+
+#define DAVINCI_INTR_DRVVBUS		0x0100
+
+#define DAVINCI_USB_USBINT_MASK		0x01ff0000	/* 8 Mentor, DRVVBUS */
+#define DAVINCI_USB_TXINT_MASK \
+	(DAVINCI_USB_TX_ENDPTS_MASK << DAVINCI_USB_TXINT_SHIFT)
+#define DAVINCI_USB_RXINT_MASK \
+	(DAVINCI_USB_RX_ENDPTS_MASK << DAVINCI_USB_RXINT_SHIFT)
+
+#define DAVINCI_BASE_OFFSET		0x400
+
+#endif	/* __MUSB_HDRDF_H__ */
diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c
new file mode 100644
index 000000000000..c5b8f0296fcf
--- /dev/null
+++ b/drivers/usb/musb/musb_core.c
@@ -0,0 +1,2253 @@
+/*
+ * MUSB OTG driver core code
+ *
+ * Copyright 2005 Mentor Graphics Corporation
+ * Copyright (C) 2005-2006 by Texas Instruments
+ * Copyright (C) 2006-2007 Nokia Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ * THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
+ * NO EVENT SHALL THE AUTHORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ */
+
+/*
+ * Inventra (Multipoint) Dual-Role Controller Driver for Linux.
+ *
+ * This consists of a Host Controller Driver (HCD) and a peripheral
+ * controller driver implementing the "Gadget" API; OTG support is
+ * in the works.  These are normal Linux-USB controller drivers which
+ * use IRQs and have no dedicated thread.
+ *
+ * This version of the driver has only been used with products from
+ * Texas Instruments.  Those products integrate the Inventra logic
+ * with other DMA, IRQ, and bus modules, as well as other logic that
+ * needs to be reflected in this driver.
+ *
+ *
+ * NOTE:  the original Mentor code here was pretty much a collection
+ * of mechanisms that don't seem to have been fully integrated/working
+ * for *any* Linux kernel version.  This version aims at Linux 2.6.now,
+ * Key open issues include:
+ *
+ *  - Lack of host-side transaction scheduling, for all transfer types.
+ *    The hardware doesn't do it; instead, software must.
+ *
+ *    This is not an issue for OTG devices that don't support external
+ *    hubs, but for more "normal" USB hosts it's a user issue that the
+ *    "multipoint" support doesn't scale in the expected ways.  That
+ *    includes DaVinci EVM in a common non-OTG mode.
+ *
+ *      * Control and bulk use dedicated endpoints, and there's as
+ *        yet no mechanism to either (a) reclaim the hardware when
+ *        peripherals are NAKing, which gets complicated with bulk
+ *        endpoints, or (b) use more than a single bulk endpoint in
+ *        each direction.
+ *
+ *        RESULT:  one device may be perceived as blocking another one.
+ *
+ *      * Interrupt and isochronous will dynamically allocate endpoint
+ *        hardware, but (a) there's no record keeping for bandwidth;
+ *        (b) in the common case that few endpoints are available, there
+ *        is no mechanism to reuse endpoints to talk to multiple devices.
+ *
+ *        RESULT:  At one extreme, bandwidth can be overcommitted in
+ *        some hardware configurations, no faults will be reported.
+ *        At the other extreme, the bandwidth capabilities which do
+ *        exist tend to be severely undercommitted.  You can't yet hook
+ *        up both a keyboard and a mouse to an external USB hub.
+ */
+
+/*
+ * This gets many kinds of configuration information:
+ *	- Kconfig for everything user-configurable
+ *	- <asm/arch/hdrc_cnf.h> for SOC or family details
+ *	- platform_device for addressing, irq, and platform_data
+ *	- platform_data is mostly for board-specific informarion
+ *
+ * Most of the conditional compilation will (someday) vanish.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/slab.h>
+#include <linux/init.h>
+#include <linux/list.h>
+#include <linux/kobject.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+
+#ifdef	CONFIG_ARM
+#include <asm/arch/hardware.h>
+#include <asm/arch/memory.h>
+#include <asm/mach-types.h>
+#endif
+
+#include "musb_core.h"
+
+
+#ifdef CONFIG_ARCH_DAVINCI
+#include "davinci.h"
+#endif
+
+
+
+unsigned debug;
+module_param(debug, uint, S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(debug, "Debug message level. Default = 0");
+
+#define DRIVER_AUTHOR "Mentor Graphics, Texas Instruments, Nokia"
+#define DRIVER_DESC "Inventra Dual-Role USB Controller Driver"
+
+#define MUSB_VERSION "6.0"
+
+#define DRIVER_INFO DRIVER_DESC ", v" MUSB_VERSION
+
+#define MUSB_DRIVER_NAME "musb_hdrc"
+const char musb_driver_name[] = MUSB_DRIVER_NAME;
+
+MODULE_DESCRIPTION(DRIVER_INFO);
+MODULE_AUTHOR(DRIVER_AUTHOR);
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:" MUSB_DRIVER_NAME);
+
+
+/*-------------------------------------------------------------------------*/
+
+static inline struct musb *dev_to_musb(struct device *dev)
+{
+#ifdef CONFIG_USB_MUSB_HDRC_HCD
+	/* usbcore insists dev->driver_data is a "struct hcd *" */
+	return hcd_to_musb(dev_get_drvdata(dev));
+#else
+	return dev_get_drvdata(dev);
+#endif
+}
+
+/*-------------------------------------------------------------------------*/
+
+#ifndef CONFIG_USB_TUSB6010
+/*
+ * Load an endpoint's FIFO
+ */
+void musb_write_fifo(struct musb_hw_ep *hw_ep, u16 len, const u8 *src)
+{
+	void __iomem *fifo = hw_ep->fifo;
+
+	prefetch((u8 *)src);
+
+	DBG(4, "%cX ep%d fifo %p count %d buf %p\n",
+			'T', hw_ep->epnum, fifo, len, src);
+
+	/* we can't assume unaligned reads work */
+	if (likely((0x01 & (unsigned long) src) == 0)) {
+		u16	index = 0;
+
+		/* best case is 32bit-aligned source address */
+		if ((0x02 & (unsigned long) src) == 0) {
+			if (len >= 4) {
+				writesl(fifo, src + index, len >> 2);
+				index += len & ~0x03;
+			}
+			if (len & 0x02) {
+				musb_writew(fifo, 0, *(u16 *)&src[index]);
+				index += 2;
+			}
+		} else {
+			if (len >= 2) {
+				writesw(fifo, src + index, len >> 1);
+				index += len & ~0x01;
+			}
+		}
+		if (len & 0x01)
+			musb_writeb(fifo, 0, src[index]);
+	} else  {
+		/* byte aligned */
+		writesb(fifo, src, len);
+	}
+}
+
+/*
+ * Unload an endpoint's FIFO
+ */
+void musb_read_fifo(struct musb_hw_ep *hw_ep, u16 len, u8 *dst)
+{
+	void __iomem *fifo = hw_ep->fifo;
+
+	DBG(4, "%cX ep%d fifo %p count %d buf %p\n",
+			'R', hw_ep->epnum, fifo, len, dst);
+
+	/* we can't assume unaligned writes work */
+	if (likely((0x01 & (unsigned long) dst) == 0)) {
+		u16	index = 0;
+
+		/* best case is 32bit-aligned destination address */
+		if ((0x02 & (unsigned long) dst) == 0) {
+			if (len >= 4) {
+				readsl(fifo, dst, len >> 2);
+				index = len & ~0x03;
+			}
+			if (len & 0x02) {
+				*(u16 *)&dst[index] = musb_readw(fifo, 0);
+				index += 2;
+			}
+		} else {
+			if (len >= 2) {
+				readsw(fifo, dst, len >> 1);
+				index = len & ~0x01;
+			}
+		}
+		if (len & 0x01)
+			dst[index] = musb_readb(fifo, 0);
+	} else  {
+		/* byte aligned */
+		readsb(fifo, dst, len);
+	}
+}
+
+#endif	/* normal PIO */
+
+
+/*-------------------------------------------------------------------------*/
+
+/* for high speed test mode; see USB 2.0 spec 7.1.20 */
+static const u8 musb_test_packet[53] = {
+	/* implicit SYNC then DATA0 to start */
+
+	/* JKJKJKJK x9 */
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+	/* JJKKJJKK x8 */
+	0xaa, 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, 0xaa,
+	/* JJJJKKKK x8 */
+	0xee, 0xee, 0xee, 0xee, 0xee, 0xee, 0xee, 0xee,
+	/* JJJJJJJKKKKKKK x8 */
+	0xfe, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+	/* JJJJJJJK x8 */
+	0x7f, 0xbf, 0xdf, 0xef, 0xf7, 0xfb, 0xfd,
+	/* JKKKKKKK x10, JK */
+	0xfc, 0x7e, 0xbf, 0xdf, 0xef, 0xf7, 0xfb, 0xfd, 0x7e
+
+	/* implicit CRC16 then EOP to end */
+};
+
+void musb_load_testpacket(struct musb *musb)
+{
+	void __iomem	*regs = musb->endpoints[0].regs;
+
+	musb_ep_select(musb->mregs, 0);
+	musb_write_fifo(musb->control_ep,
+			sizeof(musb_test_packet), musb_test_packet);
+	musb_writew(regs, MUSB_CSR0, MUSB_CSR0_TXPKTRDY);
+}
+
+/*-------------------------------------------------------------------------*/
+
+const char *otg_state_string(struct musb *musb)
+{
+	switch (musb->xceiv.state) {
+	case OTG_STATE_A_IDLE:		return "a_idle";
+	case OTG_STATE_A_WAIT_VRISE:	return "a_wait_vrise";
+	case OTG_STATE_A_WAIT_BCON:	return "a_wait_bcon";
+	case OTG_STATE_A_HOST:		return "a_host";
+	case OTG_STATE_A_SUSPEND:	return "a_suspend";
+	case OTG_STATE_A_PERIPHERAL:	return "a_peripheral";
+	case OTG_STATE_A_WAIT_VFALL:	return "a_wait_vfall";
+	case OTG_STATE_A_VBUS_ERR:	return "a_vbus_err";
+	case OTG_STATE_B_IDLE:		return "b_idle";
+	case OTG_STATE_B_SRP_INIT:	return "b_srp_init";
+	case OTG_STATE_B_PERIPHERAL:	return "b_peripheral";
+	case OTG_STATE_B_WAIT_ACON:	return "b_wait_acon";
+	case OTG_STATE_B_HOST:		return "b_host";
+	default:			return "UNDEFINED";
+	}
+}
+
+#ifdef	CONFIG_USB_MUSB_OTG
+
+/*
+ * See also USB_OTG_1-3.pdf 6.6.5 Timers
+ * REVISIT: Are the other timers done in the hardware?
+ */
+#define TB_ASE0_BRST		100	/* Min 3.125 ms */
+
+/*
+ * Handles OTG hnp timeouts, such as b_ase0_brst
+ */
+void musb_otg_timer_func(unsigned long data)
+{
+	struct musb	*musb = (struct musb *)data;
+	unsigned long	flags;
+
+	spin_lock_irqsave(&musb->lock, flags);
+	switch (musb->xceiv.state) {
+	case OTG_STATE_B_WAIT_ACON:
+		DBG(1, "HNP: b_wait_acon timeout; back to b_peripheral\n");
+		musb_g_disconnect(musb);
+		musb->xceiv.state = OTG_STATE_B_PERIPHERAL;
+		musb->is_active = 0;
+		break;
+	case OTG_STATE_A_WAIT_BCON:
+		DBG(1, "HNP: a_wait_bcon timeout; back to a_host\n");
+		musb_hnp_stop(musb);
+		break;
+	default:
+		DBG(1, "HNP: Unhandled mode %s\n", otg_state_string(musb));
+	}
+	musb->ignore_disconnect = 0;
+	spin_unlock_irqrestore(&musb->lock, flags);
+}
+
+static DEFINE_TIMER(musb_otg_timer, musb_otg_timer_func, 0, 0);
+
+/*
+ * Stops the B-device HNP state. Caller must take care of locking.
+ */
+void musb_hnp_stop(struct musb *musb)
+{
+	struct usb_hcd	*hcd = musb_to_hcd(musb);
+	void __iomem	*mbase = musb->mregs;
+	u8	reg;
+
+	switch (musb->xceiv.state) {
+	case OTG_STATE_A_PERIPHERAL:
+	case OTG_STATE_A_WAIT_VFALL:
+	case OTG_STATE_A_WAIT_BCON:
+		DBG(1, "HNP: Switching back to A-host\n");
+		musb_g_disconnect(musb);
+		musb->xceiv.state = OTG_STATE_A_IDLE;
+		MUSB_HST_MODE(musb);
+		musb->is_active = 0;
+		break;
+	case OTG_STATE_B_HOST:
+		DBG(1, "HNP: Disabling HR\n");
+		hcd->self.is_b_host = 0;
+		musb->xceiv.state = OTG_STATE_B_PERIPHERAL;
+		MUSB_DEV_MODE(musb);
+		reg = musb_readb(mbase, MUSB_POWER);
+		reg |= MUSB_POWER_SUSPENDM;
+		musb_writeb(mbase, MUSB_POWER, reg);
+		/* REVISIT: Start SESSION_REQUEST here? */
+		break;
+	default:
+		DBG(1, "HNP: Stopping in unknown state %s\n",
+			otg_state_string(musb));
+	}
+
+	/*
+	 * When returning to A state after HNP, avoid hub_port_rebounce(),
+	 * which cause occasional OPT A "Did not receive reset after connect"
+	 * errors.
+	 */
+	musb->port1_status &=
+		~(1 << USB_PORT_FEAT_C_CONNECTION);
+}
+
+#endif
+
+/*
+ * Interrupt Service Routine to record USB "global" interrupts.
+ * Since these do not happen often and signify things of
+ * paramount importance, it seems OK to check them individually;
+ * the order of the tests is specified in the manual
+ *
+ * @param musb instance pointer
+ * @param int_usb register contents
+ * @param devctl
+ * @param power
+ */
+
+#define STAGE0_MASK (MUSB_INTR_RESUME | MUSB_INTR_SESSREQ \
+		| MUSB_INTR_VBUSERROR | MUSB_INTR_CONNECT \
+		| MUSB_INTR_RESET)
+
+static irqreturn_t musb_stage0_irq(struct musb *musb, u8 int_usb,
+				u8 devctl, u8 power)
+{
+	irqreturn_t handled = IRQ_NONE;
+	void __iomem *mbase = musb->mregs;
+
+	DBG(3, "<== Power=%02x, DevCtl=%02x, int_usb=0x%x\n", power, devctl,
+		int_usb);
+
+	/* in host mode, the peripheral may issue remote wakeup.
+	 * in peripheral mode, the host may resume the link.
+	 * spurious RESUME irqs happen too, paired with SUSPEND.
+	 */
+	if (int_usb & MUSB_INTR_RESUME) {
+		handled = IRQ_HANDLED;
+		DBG(3, "RESUME (%s)\n", otg_state_string(musb));
+
+		if (devctl & MUSB_DEVCTL_HM) {
+#ifdef CONFIG_USB_MUSB_HDRC_HCD
+			switch (musb->xceiv.state) {
+			case OTG_STATE_A_SUSPEND:
+				/* remote wakeup?  later, GetPortStatus
+				 * will stop RESUME signaling
+				 */
+
+				if (power & MUSB_POWER_SUSPENDM) {
+					/* spurious */
+					musb->int_usb &= ~MUSB_INTR_SUSPEND;
+					DBG(2, "Spurious SUSPENDM\n");
+					break;
+				}
+
+				power &= ~MUSB_POWER_SUSPENDM;
+				musb_writeb(mbase, MUSB_POWER,
+						power | MUSB_POWER_RESUME);
+
+				musb->port1_status |=
+						(USB_PORT_STAT_C_SUSPEND << 16)
+						| MUSB_PORT_STAT_RESUME;
+				musb->rh_timer = jiffies
+						+ msecs_to_jiffies(20);
+
+				musb->xceiv.state = OTG_STATE_A_HOST;
+				musb->is_active = 1;
+				usb_hcd_resume_root_hub(musb_to_hcd(musb));
+				break;
+			case OTG_STATE_B_WAIT_ACON:
+				musb->xceiv.state = OTG_STATE_B_PERIPHERAL;
+				musb->is_active = 1;
+				MUSB_DEV_MODE(musb);
+				break;
+			default:
+				WARNING("bogus %s RESUME (%s)\n",
+					"host",
+					otg_state_string(musb));
+			}
+#endif
+		} else {
+			switch (musb->xceiv.state) {
+#ifdef CONFIG_USB_MUSB_HDRC_HCD
+			case OTG_STATE_A_SUSPEND:
+				/* possibly DISCONNECT is upcoming */
+				musb->xceiv.state = OTG_STATE_A_HOST;
+				usb_hcd_resume_root_hub(musb_to_hcd(musb));
+				break;
+#endif
+#ifdef CONFIG_USB_GADGET_MUSB_HDRC
+			case OTG_STATE_B_WAIT_ACON:
+			case OTG_STATE_B_PERIPHERAL:
+				/* disconnect while suspended?  we may
+				 * not get a disconnect irq...
+				 */
+				if ((devctl & MUSB_DEVCTL_VBUS)
+						!= (3 << MUSB_DEVCTL_VBUS_SHIFT)
+						) {
+					musb->int_usb |= MUSB_INTR_DISCONNECT;
+					musb->int_usb &= ~MUSB_INTR_SUSPEND;
+					break;
+				}
+				musb_g_resume(musb);
+				break;
+			case OTG_STATE_B_IDLE:
+				musb->int_usb &= ~MUSB_INTR_SUSPEND;
+				break;
+#endif
+			default:
+				WARNING("bogus %s RESUME (%s)\n",
+					"peripheral",
+					otg_state_string(musb));
+			}
+		}
+	}
+
+#ifdef CONFIG_USB_MUSB_HDRC_HCD
+	/* see manual for the order of the tests */
+	if (int_usb & MUSB_INTR_SESSREQ) {
+		DBG(1, "SESSION_REQUEST (%s)\n", otg_state_string(musb));
+
+		/* IRQ arrives from ID pin sense or (later, if VBUS power
+		 * is removed) SRP.  responses are time critical:
+		 *  - turn on VBUS (with silicon-specific mechanism)
+		 *  - go through A_WAIT_VRISE
+		 *  - ... to A_WAIT_BCON.
+		 * a_wait_vrise_tmout triggers VBUS_ERROR transitions
+		 */
+		musb_writeb(mbase, MUSB_DEVCTL, MUSB_DEVCTL_SESSION);
+		musb->ep0_stage = MUSB_EP0_START;
+		musb->xceiv.state = OTG_STATE_A_IDLE;
+		MUSB_HST_MODE(musb);
+		musb_set_vbus(musb, 1);
+
+		handled = IRQ_HANDLED;
+	}
+
+	if (int_usb & MUSB_INTR_VBUSERROR) {
+		int	ignore = 0;
+
+		/* During connection as an A-Device, we may see a short
+		 * current spikes causing voltage drop, because of cable
+		 * and peripheral capacitance combined with vbus draw.
+		 * (So: less common with truly self-powered devices, where
+		 * vbus doesn't act like a power supply.)
+		 *
+		 * Such spikes are short; usually less than ~500 usec, max
+		 * of ~2 msec.  That is, they're not sustained overcurrent
+		 * errors, though they're reported using VBUSERROR irqs.
+		 *
+		 * Workarounds:  (a) hardware: use self powered devices.
+		 * (b) software:  ignore non-repeated VBUS errors.
+		 *
+		 * REVISIT:  do delays from lots of DEBUG_KERNEL checks
+		 * make trouble here, keeping VBUS < 4.4V ?
+		 */
+		switch (musb->xceiv.state) {
+		case OTG_STATE_A_HOST:
+			/* recovery is dicey once we've gotten past the
+			 * initial stages of enumeration, but if VBUS
+			 * stayed ok at the other end of the link, and
+			 * another reset is due (at least for high speed,
+			 * to redo the chirp etc), it might work OK...
+			 */
+		case OTG_STATE_A_WAIT_BCON:
+		case OTG_STATE_A_WAIT_VRISE:
+			if (musb->vbuserr_retry) {
+				musb->vbuserr_retry--;
+				ignore = 1;
+				devctl |= MUSB_DEVCTL_SESSION;
+				musb_writeb(mbase, MUSB_DEVCTL, devctl);
+			} else {
+				musb->port1_status |=
+					  (1 << USB_PORT_FEAT_OVER_CURRENT)
+					| (1 << USB_PORT_FEAT_C_OVER_CURRENT);
+			}
+			break;
+		default:
+			break;
+		}
+
+		DBG(1, "VBUS_ERROR in %s (%02x, %s), retry #%d, port1 %08x\n",
+				otg_state_string(musb),
+				devctl,
+				({ char *s;
+				switch (devctl & MUSB_DEVCTL_VBUS) {
+				case 0 << MUSB_DEVCTL_VBUS_SHIFT:
+					s = "<SessEnd"; break;
+				case 1 << MUSB_DEVCTL_VBUS_SHIFT:
+					s = "<AValid"; break;
+				case 2 << MUSB_DEVCTL_VBUS_SHIFT:
+					s = "<VBusValid"; break;
+				/* case 3 << MUSB_DEVCTL_VBUS_SHIFT: */
+				default:
+					s = "VALID"; break;
+				}; s; }),
+				VBUSERR_RETRY_COUNT - musb->vbuserr_retry,
+				musb->port1_status);
+
+		/* go through A_WAIT_VFALL then start a new session */
+		if (!ignore)
+			musb_set_vbus(musb, 0);
+		handled = IRQ_HANDLED;
+	}
+
+	if (int_usb & MUSB_INTR_CONNECT) {
+		struct usb_hcd *hcd = musb_to_hcd(musb);
+
+		handled = IRQ_HANDLED;
+		musb->is_active = 1;
+		set_bit(HCD_FLAG_SAW_IRQ, &hcd->flags);
+
+		musb->ep0_stage = MUSB_EP0_START;
+
+#ifdef CONFIG_USB_MUSB_OTG
+		/* flush endpoints when transitioning from Device Mode */
+		if (is_peripheral_active(musb)) {
+			/* REVISIT HNP; just force disconnect */
+		}
+		musb_writew(mbase, MUSB_INTRTXE, musb->epmask);
+		musb_writew(mbase, MUSB_INTRRXE, musb->epmask & 0xfffe);
+		musb_writeb(mbase, MUSB_INTRUSBE, 0xf7);
+#endif
+		musb->port1_status &= ~(USB_PORT_STAT_LOW_SPEED
+					|USB_PORT_STAT_HIGH_SPEED
+					|USB_PORT_STAT_ENABLE
+					);
+		musb->port1_status |= USB_PORT_STAT_CONNECTION
+					|(USB_PORT_STAT_C_CONNECTION << 16);
+
+		/* high vs full speed is just a guess until after reset */
+		if (devctl & MUSB_DEVCTL_LSDEV)
+			musb->port1_status |= USB_PORT_STAT_LOW_SPEED;
+
+		if (hcd->status_urb)
+			usb_hcd_poll_rh_status(hcd);
+		else
+			usb_hcd_resume_root_hub(hcd);
+
+		MUSB_HST_MODE(musb);
+
+		/* indicate new connection to OTG machine */
+		switch (musb->xceiv.state) {
+		case OTG_STATE_B_PERIPHERAL:
+			if (int_usb & MUSB_INTR_SUSPEND) {
+				DBG(1, "HNP: SUSPEND+CONNECT, now b_host\n");
+				musb->xceiv.state = OTG_STATE_B_HOST;
+				hcd->self.is_b_host = 1;
+				int_usb &= ~MUSB_INTR_SUSPEND;
+			} else
+				DBG(1, "CONNECT as b_peripheral???\n");
+			break;
+		case OTG_STATE_B_WAIT_ACON:
+			DBG(1, "HNP: Waiting to switch to b_host state\n");
+			musb->xceiv.state = OTG_STATE_B_HOST;
+			hcd->self.is_b_host = 1;
+			break;
+		default:
+			if ((devctl & MUSB_DEVCTL_VBUS)
+					== (3 << MUSB_DEVCTL_VBUS_SHIFT)) {
+				musb->xceiv.state = OTG_STATE_A_HOST;
+				hcd->self.is_b_host = 0;
+			}
+			break;
+		}
+		DBG(1, "CONNECT (%s) devctl %02x\n",
+				otg_state_string(musb), devctl);
+	}
+#endif	/* CONFIG_USB_MUSB_HDRC_HCD */
+
+	/* mentor saves a bit: bus reset and babble share the same irq.
+	 * only host sees babble; only peripheral sees bus reset.
+	 */
+	if (int_usb & MUSB_INTR_RESET) {
+		if (is_host_capable() && (devctl & MUSB_DEVCTL_HM) != 0) {
+			/*
+			 * Looks like non-HS BABBLE can be ignored, but
+			 * HS BABBLE is an error condition. For HS the solution
+			 * is to avoid babble in the first place and fix what
+			 * caused BABBLE. When HS BABBLE happens we can only
+			 * stop the session.
+			 */
+			if (devctl & (MUSB_DEVCTL_FSDEV | MUSB_DEVCTL_LSDEV))
+				DBG(1, "BABBLE devctl: %02x\n", devctl);
+			else {
+				ERR("Stopping host session -- babble\n");
+				musb_writeb(mbase, MUSB_DEVCTL, 0);
+			}
+		} else if (is_peripheral_capable()) {
+			DBG(1, "BUS RESET as %s\n", otg_state_string(musb));
+			switch (musb->xceiv.state) {
+#ifdef CONFIG_USB_OTG
+			case OTG_STATE_A_SUSPEND:
+				/* We need to ignore disconnect on suspend
+				 * otherwise tusb 2.0 won't reconnect after a
+				 * power cycle, which breaks otg compliance.
+				 */
+				musb->ignore_disconnect = 1;
+				musb_g_reset(musb);
+				/* FALLTHROUGH */
+			case OTG_STATE_A_WAIT_BCON:	/* OPT TD.4.7-900ms */
+				DBG(1, "HNP: Setting timer as %s\n",
+						otg_state_string(musb));
+				musb_otg_timer.data = (unsigned long)musb;
+				mod_timer(&musb_otg_timer, jiffies
+					+ msecs_to_jiffies(100));
+				break;
+			case OTG_STATE_A_PERIPHERAL:
+				musb_hnp_stop(musb);
+				break;
+			case OTG_STATE_B_WAIT_ACON:
+				DBG(1, "HNP: RESET (%s), to b_peripheral\n",
+					otg_state_string(musb));
+				musb->xceiv.state = OTG_STATE_B_PERIPHERAL;
+				musb_g_reset(musb);
+				break;
+#endif
+			case OTG_STATE_B_IDLE:
+				musb->xceiv.state = OTG_STATE_B_PERIPHERAL;
+				/* FALLTHROUGH */
+			case OTG_STATE_B_PERIPHERAL:
+				musb_g_reset(musb);
+				break;
+			default:
+				DBG(1, "Unhandled BUS RESET as %s\n",
+					otg_state_string(musb));
+			}
+		}
+
+		handled = IRQ_HANDLED;
+	}
+	schedule_work(&musb->irq_work);
+
+	return handled;
+}
+
+/*
+ * Interrupt Service Routine to record USB "global" interrupts.
+ * Since these do not happen often and signify things of
+ * paramount importance, it seems OK to check them individually;
+ * the order of the tests is specified in the manual
+ *
+ * @param musb instance pointer
+ * @param int_usb register contents
+ * @param devctl
+ * @param power
+ */
+static irqreturn_t musb_stage2_irq(struct musb *musb, u8 int_usb,
+				u8 devctl, u8 power)
+{
+	irqreturn_t handled = IRQ_NONE;
+
+#if 0
+/* REVISIT ... this would be for multiplexing periodic endpoints, or
+ * supporting transfer phasing to prevent exceeding ISO bandwidth
+ * limits of a given frame or microframe.
+ *
+ * It's not needed for peripheral side, which dedicates endpoints;
+ * though it _might_ use SOF irqs for other purposes.
+ *
+ * And it's not currently needed for host side, which also dedicates
+ * endpoints, relies on TX/RX interval registers, and isn't claimed
+ * to support ISO transfers yet.
+ */
+	if (int_usb & MUSB_INTR_SOF) {
+		void __iomem *mbase = musb->mregs;
+		struct musb_hw_ep	*ep;
+		u8 epnum;
+		u16 frame;
+
+		DBG(6, "START_OF_FRAME\n");
+		handled = IRQ_HANDLED;
+
+		/* start any periodic Tx transfers waiting for current frame */
+		frame = musb_readw(mbase, MUSB_FRAME);
+		ep = musb->endpoints;
+		for (epnum = 1; (epnum < musb->nr_endpoints)
+					&& (musb->epmask >= (1 << epnum));
+				epnum++, ep++) {
+			/*
+			 * FIXME handle framecounter wraps (12 bits)
+			 * eliminate duplicated StartUrb logic
+			 */
+			if (ep->dwWaitFrame >= frame) {
+				ep->dwWaitFrame = 0;
+				pr_debug("SOF --> periodic TX%s on %d\n",
+					ep->tx_channel ? " DMA" : "",
+					epnum);
+				if (!ep->tx_channel)
+					musb_h_tx_start(musb, epnum);
+				else
+					cppi_hostdma_start(musb, epnum);
+			}
+		}		/* end of for loop */
+	}
+#endif
+
+	if ((int_usb & MUSB_INTR_DISCONNECT) && !musb->ignore_disconnect) {
+		DBG(1, "DISCONNECT (%s) as %s, devctl %02x\n",
+				otg_state_string(musb),
+				MUSB_MODE(musb), devctl);
+		handled = IRQ_HANDLED;
+
+		switch (musb->xceiv.state) {
+#ifdef CONFIG_USB_MUSB_HDRC_HCD
+		case OTG_STATE_A_HOST:
+		case OTG_STATE_A_SUSPEND:
+			musb_root_disconnect(musb);
+			if (musb->a_wait_bcon != 0)
+				musb_platform_try_idle(musb, jiffies
+					+ msecs_to_jiffies(musb->a_wait_bcon));
+			break;
+#endif	/* HOST */
+#ifdef CONFIG_USB_MUSB_OTG
+		case OTG_STATE_B_HOST:
+			musb_hnp_stop(musb);
+			break;
+		case OTG_STATE_A_PERIPHERAL:
+			musb_hnp_stop(musb);
+			musb_root_disconnect(musb);
+			/* FALLTHROUGH */
+		case OTG_STATE_B_WAIT_ACON:
+			/* FALLTHROUGH */
+#endif	/* OTG */
+#ifdef CONFIG_USB_GADGET_MUSB_HDRC
+		case OTG_STATE_B_PERIPHERAL:
+		case OTG_STATE_B_IDLE:
+			musb_g_disconnect(musb);
+			break;
+#endif	/* GADGET */
+		default:
+			WARNING("unhandled DISCONNECT transition (%s)\n",
+				otg_state_string(musb));
+			break;
+		}
+
+		schedule_work(&musb->irq_work);
+	}
+
+	if (int_usb & MUSB_INTR_SUSPEND) {
+		DBG(1, "SUSPEND (%s) devctl %02x power %02x\n",
+				otg_state_string(musb), devctl, power);
+		handled = IRQ_HANDLED;
+
+		switch (musb->xceiv.state) {
+#ifdef	CONFIG_USB_MUSB_OTG
+		case OTG_STATE_A_PERIPHERAL:
+			/*
+			 * We cannot stop HNP here, devctl BDEVICE might be
+			 * still set.
+			 */
+			break;
+#endif
+		case OTG_STATE_B_PERIPHERAL:
+			musb_g_suspend(musb);
+			musb->is_active = is_otg_enabled(musb)
+					&& musb->xceiv.gadget->b_hnp_enable;
+			if (musb->is_active) {
+#ifdef	CONFIG_USB_MUSB_OTG
+				musb->xceiv.state = OTG_STATE_B_WAIT_ACON;
+				DBG(1, "HNP: Setting timer for b_ase0_brst\n");
+				musb_otg_timer.data = (unsigned long)musb;
+				mod_timer(&musb_otg_timer, jiffies
+					+ msecs_to_jiffies(TB_ASE0_BRST));
+#endif
+			}
+			break;
+		case OTG_STATE_A_WAIT_BCON:
+			if (musb->a_wait_bcon != 0)
+				musb_platform_try_idle(musb, jiffies
+					+ msecs_to_jiffies(musb->a_wait_bcon));
+			break;
+		case OTG_STATE_A_HOST:
+			musb->xceiv.state = OTG_STATE_A_SUSPEND;
+			musb->is_active = is_otg_enabled(musb)
+					&& musb->xceiv.host->b_hnp_enable;
+			break;
+		case OTG_STATE_B_HOST:
+			/* Transition to B_PERIPHERAL, see 6.8.2.6 p 44 */
+			DBG(1, "REVISIT: SUSPEND as B_HOST\n");
+			break;
+		default:
+			/* "should not happen" */
+			musb->is_active = 0;
+			break;
+		}
+		schedule_work(&musb->irq_work);
+	}
+
+
+	return handled;
+}
+
+/*-------------------------------------------------------------------------*/
+
+/*
+* Program the HDRC to start (enable interrupts, dma, etc.).
+*/
+void musb_start(struct musb *musb)
+{
+	void __iomem	*regs = musb->mregs;
+	u8		devctl = musb_readb(regs, MUSB_DEVCTL);
+
+	DBG(2, "<== devctl %02x\n", devctl);
+
+	/*  Set INT enable registers, enable interrupts */
+	musb_writew(regs, MUSB_INTRTXE, musb->epmask);
+	musb_writew(regs, MUSB_INTRRXE, musb->epmask & 0xfffe);
+	musb_writeb(regs, MUSB_INTRUSBE, 0xf7);
+
+	musb_writeb(regs, MUSB_TESTMODE, 0);
+
+	/* put into basic highspeed mode and start session */
+	musb_writeb(regs, MUSB_POWER, MUSB_POWER_ISOUPDATE
+						| MUSB_POWER_SOFTCONN
+						| MUSB_POWER_HSENAB
+						/* ENSUSPEND wedges tusb */
+						/* | MUSB_POWER_ENSUSPEND */
+						);
+
+	musb->is_active = 0;
+	devctl = musb_readb(regs, MUSB_DEVCTL);
+	devctl &= ~MUSB_DEVCTL_SESSION;
+
+	if (is_otg_enabled(musb)) {
+		/* session started after:
+		 * (a) ID-grounded irq, host mode;
+		 * (b) vbus present/connect IRQ, peripheral mode;
+		 * (c) peripheral initiates, using SRP
+		 */
+		if ((devctl & MUSB_DEVCTL_VBUS) == MUSB_DEVCTL_VBUS)
+			musb->is_active = 1;
+		else
+			devctl |= MUSB_DEVCTL_SESSION;
+
+	} else if (is_host_enabled(musb)) {
+		/* assume ID pin is hard-wired to ground */
+		devctl |= MUSB_DEVCTL_SESSION;
+
+	} else /* peripheral is enabled */ {
+		if ((devctl & MUSB_DEVCTL_VBUS) == MUSB_DEVCTL_VBUS)
+			musb->is_active = 1;
+	}
+	musb_platform_enable(musb);
+	musb_writeb(regs, MUSB_DEVCTL, devctl);
+}
+
+
+static void musb_generic_disable(struct musb *musb)
+{
+	void __iomem	*mbase = musb->mregs;
+	u16	temp;
+
+	/* disable interrupts */
+	musb_writeb(mbase, MUSB_INTRUSBE, 0);
+	musb_writew(mbase, MUSB_INTRTXE, 0);
+	musb_writew(mbase, MUSB_INTRRXE, 0);
+
+	/* off */
+	musb_writeb(mbase, MUSB_DEVCTL, 0);
+
+	/*  flush pending interrupts */
+	temp = musb_readb(mbase, MUSB_INTRUSB);
+	temp = musb_readw(mbase, MUSB_INTRTX);
+	temp = musb_readw(mbase, MUSB_INTRRX);
+
+}
+
+/*
+ * Make the HDRC stop (disable interrupts, etc.);
+ * reversible by musb_start
+ * called on gadget driver unregister
+ * with controller locked, irqs blocked
+ * acts as a NOP unless some role activated the hardware
+ */
+void musb_stop(struct musb *musb)
+{
+	/* stop IRQs, timers, ... */
+	musb_platform_disable(musb);
+	musb_generic_disable(musb);
+	DBG(3, "HDRC disabled\n");
+
+	/* FIXME
+	 *  - mark host and/or peripheral drivers unusable/inactive
+	 *  - disable DMA (and enable it in HdrcStart)
+	 *  - make sure we can musb_start() after musb_stop(); with
+	 *    OTG mode, gadget driver module rmmod/modprobe cycles that
+	 *  - ...
+	 */
+	musb_platform_try_idle(musb, 0);
+}
+
+static void musb_shutdown(struct platform_device *pdev)
+{
+	struct musb	*musb = dev_to_musb(&pdev->dev);
+	unsigned long	flags;
+
+	spin_lock_irqsave(&musb->lock, flags);
+	musb_platform_disable(musb);
+	musb_generic_disable(musb);
+	if (musb->clock) {
+		clk_put(musb->clock);
+		musb->clock = NULL;
+	}
+	spin_unlock_irqrestore(&musb->lock, flags);
+
+	/* FIXME power down */
+}
+
+
+/*-------------------------------------------------------------------------*/
+
+/*
+ * The silicon either has hard-wired endpoint configurations, or else
+ * "dynamic fifo" sizing.  The driver has support for both, though at this
+ * writing only the dynamic sizing is very well tested.   We use normal
+ * idioms to so both modes are compile-tested, but dead code elimination
+ * leaves only the relevant one in the object file.
+ *
+ * We don't currently use dynamic fifo setup capability to do anything
+ * more than selecting one of a bunch of predefined configurations.
+ */
+#if defined(CONFIG_USB_TUSB6010) || \
+	defined(CONFIG_ARCH_OMAP2430) || defined(CONFIG_ARCH_OMAP34XX)
+static ushort __initdata fifo_mode = 4;
+#else
+static ushort __initdata fifo_mode = 2;
+#endif
+
+/* "modprobe ... fifo_mode=1" etc */
+module_param(fifo_mode, ushort, 0);
+MODULE_PARM_DESC(fifo_mode, "initial endpoint configuration");
+
+
+enum fifo_style { FIFO_RXTX, FIFO_TX, FIFO_RX } __attribute__ ((packed));
+enum buf_mode { BUF_SINGLE, BUF_DOUBLE } __attribute__ ((packed));
+
+struct fifo_cfg {
+	u8		hw_ep_num;
+	enum fifo_style	style;
+	enum buf_mode	mode;
+	u16		maxpacket;
+};
+
+/*
+ * tables defining fifo_mode values.  define more if you like.
+ * for host side, make sure both halves of ep1 are set up.
+ */
+
+/* mode 0 - fits in 2KB */
+static struct fifo_cfg __initdata mode_0_cfg[] = {
+{ .hw_ep_num = 1, .style = FIFO_TX,   .maxpacket = 512, },
+{ .hw_ep_num = 1, .style = FIFO_RX,   .maxpacket = 512, },
+{ .hw_ep_num = 2, .style = FIFO_RXTX, .maxpacket = 512, },
+{ .hw_ep_num = 3, .style = FIFO_RXTX, .maxpacket = 256, },
+{ .hw_ep_num = 4, .style = FIFO_RXTX, .maxpacket = 256, },
+};
+
+/* mode 1 - fits in 4KB */
+static struct fifo_cfg __initdata mode_1_cfg[] = {
+{ .hw_ep_num = 1, .style = FIFO_TX,   .maxpacket = 512, .mode = BUF_DOUBLE, },
+{ .hw_ep_num = 1, .style = FIFO_RX,   .maxpacket = 512, .mode = BUF_DOUBLE, },
+{ .hw_ep_num = 2, .style = FIFO_RXTX, .maxpacket = 512, .mode = BUF_DOUBLE, },
+{ .hw_ep_num = 3, .style = FIFO_RXTX, .maxpacket = 256, },
+{ .hw_ep_num = 4, .style = FIFO_RXTX, .maxpacket = 256, },
+};
+
+/* mode 2 - fits in 4KB */
+static struct fifo_cfg __initdata mode_2_cfg[] = {
+{ .hw_ep_num = 1, .style = FIFO_TX,   .maxpacket = 512, },
+{ .hw_ep_num = 1, .style = FIFO_RX,   .maxpacket = 512, },
+{ .hw_ep_num = 2, .style = FIFO_TX,   .maxpacket = 512, },
+{ .hw_ep_num = 2, .style = FIFO_RX,   .maxpacket = 512, },
+{ .hw_ep_num = 3, .style = FIFO_RXTX, .maxpacket = 256, },
+{ .hw_ep_num = 4, .style = FIFO_RXTX, .maxpacket = 256, },
+};
+
+/* mode 3 - fits in 4KB */
+static struct fifo_cfg __initdata mode_3_cfg[] = {
+{ .hw_ep_num = 1, .style = FIFO_TX,   .maxpacket = 512, .mode = BUF_DOUBLE, },
+{ .hw_ep_num = 1, .style = FIFO_RX,   .maxpacket = 512, .mode = BUF_DOUBLE, },
+{ .hw_ep_num = 2, .style = FIFO_TX,   .maxpacket = 512, },
+{ .hw_ep_num = 2, .style = FIFO_RX,   .maxpacket = 512, },
+{ .hw_ep_num = 3, .style = FIFO_RXTX, .maxpacket = 256, },
+{ .hw_ep_num = 4, .style = FIFO_RXTX, .maxpacket = 256, },
+};
+
+/* mode 4 - fits in 16KB */
+static struct fifo_cfg __initdata mode_4_cfg[] = {
+{ .hw_ep_num =  1, .style = FIFO_TX,   .maxpacket = 512, },
+{ .hw_ep_num =  1, .style = FIFO_RX,   .maxpacket = 512, },
+{ .hw_ep_num =  2, .style = FIFO_TX,   .maxpacket = 512, },
+{ .hw_ep_num =  2, .style = FIFO_RX,   .maxpacket = 512, },
+{ .hw_ep_num =  3, .style = FIFO_TX,   .maxpacket = 512, },
+{ .hw_ep_num =  3, .style = FIFO_RX,   .maxpacket = 512, },
+{ .hw_ep_num =  4, .style = FIFO_TX,   .maxpacket = 512, },
+{ .hw_ep_num =  4, .style = FIFO_RX,   .maxpacket = 512, },
+{ .hw_ep_num =  5, .style = FIFO_TX,   .maxpacket = 512, },
+{ .hw_ep_num =  5, .style = FIFO_RX,   .maxpacket = 512, },
+{ .hw_ep_num =  6, .style = FIFO_TX,   .maxpacket = 512, },
+{ .hw_ep_num =  6, .style = FIFO_RX,   .maxpacket = 512, },
+{ .hw_ep_num =  7, .style = FIFO_TX,   .maxpacket = 512, },
+{ .hw_ep_num =  7, .style = FIFO_RX,   .maxpacket = 512, },
+{ .hw_ep_num =  8, .style = FIFO_TX,   .maxpacket = 512, },
+{ .hw_ep_num =  8, .style = FIFO_RX,   .maxpacket = 512, },
+{ .hw_ep_num =  9, .style = FIFO_TX,   .maxpacket = 512, },
+{ .hw_ep_num =  9, .style = FIFO_RX,   .maxpacket = 512, },
+{ .hw_ep_num = 10, .style = FIFO_TX,   .maxpacket = 512, },
+{ .hw_ep_num = 10, .style = FIFO_RX,   .maxpacket = 512, },
+{ .hw_ep_num = 11, .style = FIFO_TX,   .maxpacket = 512, },
+{ .hw_ep_num = 11, .style = FIFO_RX,   .maxpacket = 512, },
+{ .hw_ep_num = 12, .style = FIFO_TX,   .maxpacket = 512, },
+{ .hw_ep_num = 12, .style = FIFO_RX,   .maxpacket = 512, },
+{ .hw_ep_num = 13, .style = FIFO_TX,   .maxpacket = 512, },
+{ .hw_ep_num = 13, .style = FIFO_RX,   .maxpacket = 512, },
+{ .hw_ep_num = 14, .style = FIFO_RXTX, .maxpacket = 1024, },
+{ .hw_ep_num = 15, .style = FIFO_RXTX, .maxpacket = 1024, },
+};
+
+
+/*
+ * configure a fifo; for non-shared endpoints, this may be called
+ * once for a tx fifo and once for an rx fifo.
+ *
+ * returns negative errno or offset for next fifo.
+ */
+static int __init
+fifo_setup(struct musb *musb, struct musb_hw_ep  *hw_ep,
+		const struct fifo_cfg *cfg, u16 offset)
+{
+	void __iomem	*mbase = musb->mregs;
+	int	size = 0;
+	u16	maxpacket = cfg->maxpacket;
+	u16	c_off = offset >> 3;
+	u8	c_size;
+
+	/* expect hw_ep has already been zero-initialized */
+
+	size = ffs(max(maxpacket, (u16) 8)) - 1;
+	maxpacket = 1 << size;
+
+	c_size = size - 3;
+	if (cfg->mode == BUF_DOUBLE) {
+		if ((offset + (maxpacket << 1)) >
+				(1 << (musb->config->ram_bits + 2)))
+			return -EMSGSIZE;
+		c_size |= MUSB_FIFOSZ_DPB;
+	} else {
+		if ((offset + maxpacket) > (1 << (musb->config->ram_bits + 2)))
+			return -EMSGSIZE;
+	}
+
+	/* configure the FIFO */
+	musb_writeb(mbase, MUSB_INDEX, hw_ep->epnum);
+
+#ifdef CONFIG_USB_MUSB_HDRC_HCD
+	/* EP0 reserved endpoint for control, bidirectional;
+	 * EP1 reserved for bulk, two unidirection halves.
+	 */
+	if (hw_ep->epnum == 1)
+		musb->bulk_ep = hw_ep;
+	/* REVISIT error check:  be sure ep0 can both rx and tx ... */
+#endif
+	switch (cfg->style) {
+	case FIFO_TX:
+		musb_writeb(mbase, MUSB_TXFIFOSZ, c_size);
+		musb_writew(mbase, MUSB_TXFIFOADD, c_off);
+		hw_ep->tx_double_buffered = !!(c_size & MUSB_FIFOSZ_DPB);
+		hw_ep->max_packet_sz_tx = maxpacket;
+		break;
+	case FIFO_RX:
+		musb_writeb(mbase, MUSB_RXFIFOSZ, c_size);
+		musb_writew(mbase, MUSB_RXFIFOADD, c_off);
+		hw_ep->rx_double_buffered = !!(c_size & MUSB_FIFOSZ_DPB);
+		hw_ep->max_packet_sz_rx = maxpacket;
+		break;
+	case FIFO_RXTX:
+		musb_writeb(mbase, MUSB_TXFIFOSZ, c_size);
+		musb_writew(mbase, MUSB_TXFIFOADD, c_off);
+		hw_ep->rx_double_buffered = !!(c_size & MUSB_FIFOSZ_DPB);
+		hw_ep->max_packet_sz_rx = maxpacket;
+
+		musb_writeb(mbase, MUSB_RXFIFOSZ, c_size);
+		musb_writew(mbase, MUSB_RXFIFOADD, c_off);
+		hw_ep->tx_double_buffered = hw_ep->rx_double_buffered;
+		hw_ep->max_packet_sz_tx = maxpacket;
+
+		hw_ep->is_shared_fifo = true;
+		break;
+	}
+
+	/* NOTE rx and tx endpoint irqs aren't managed separately,
+	 * which happens to be ok
+	 */
+	musb->epmask |= (1 << hw_ep->epnum);
+
+	return offset + (maxpacket << ((c_size & MUSB_FIFOSZ_DPB) ? 1 : 0));
+}
+
+static struct fifo_cfg __initdata ep0_cfg = {
+	.style = FIFO_RXTX, .maxpacket = 64,
+};
+
+static int __init ep_config_from_table(struct musb *musb)
+{
+	const struct fifo_cfg	*cfg;
+	unsigned		i, n;
+	int			offset;
+	struct musb_hw_ep	*hw_ep = musb->endpoints;
+
+	switch (fifo_mode) {
+	default:
+		fifo_mode = 0;
+		/* FALLTHROUGH */
+	case 0:
+		cfg = mode_0_cfg;
+		n = ARRAY_SIZE(mode_0_cfg);
+		break;
+	case 1:
+		cfg = mode_1_cfg;
+		n = ARRAY_SIZE(mode_1_cfg);
+		break;
+	case 2:
+		cfg = mode_2_cfg;
+		n = ARRAY_SIZE(mode_2_cfg);
+		break;
+	case 3:
+		cfg = mode_3_cfg;
+		n = ARRAY_SIZE(mode_3_cfg);
+		break;
+	case 4:
+		cfg = mode_4_cfg;
+		n = ARRAY_SIZE(mode_4_cfg);
+		break;
+	}
+
+	printk(KERN_DEBUG "%s: setup fifo_mode %d\n",
+			musb_driver_name, fifo_mode);
+
+
+	offset = fifo_setup(musb, hw_ep, &ep0_cfg, 0);
+	/* assert(offset > 0) */
+
+	/* NOTE:  for RTL versions >= 1.400 EPINFO and RAMINFO would
+	 * be better than static musb->config->num_eps and DYN_FIFO_SIZE...
+	 */
+
+	for (i = 0; i < n; i++) {
+		u8	epn = cfg->hw_ep_num;
+
+		if (epn >= musb->config->num_eps) {
+			pr_debug("%s: invalid ep %d\n",
+					musb_driver_name, epn);
+			continue;
+		}
+		offset = fifo_setup(musb, hw_ep + epn, cfg++, offset);
+		if (offset < 0) {
+			pr_debug("%s: mem overrun, ep %d\n",
+					musb_driver_name, epn);
+			return -EINVAL;
+		}
+		epn++;
+		musb->nr_endpoints = max(epn, musb->nr_endpoints);
+	}
+
+	printk(KERN_DEBUG "%s: %d/%d max ep, %d/%d memory\n",
+			musb_driver_name,
+			n + 1, musb->config->num_eps * 2 - 1,
+			offset, (1 << (musb->config->ram_bits + 2)));
+
+#ifdef CONFIG_USB_MUSB_HDRC_HCD
+	if (!musb->bulk_ep) {
+		pr_debug("%s: missing bulk\n", musb_driver_name);
+		return -EINVAL;
+	}
+#endif
+
+	return 0;
+}
+
+
+/*
+ * ep_config_from_hw - when MUSB_C_DYNFIFO_DEF is false
+ * @param musb the controller
+ */
+static int __init ep_config_from_hw(struct musb *musb)
+{
+	u8 epnum = 0, reg;
+	struct musb_hw_ep *hw_ep;
+	void *mbase = musb->mregs;
+
+	DBG(2, "<== static silicon ep config\n");
+
+	/* FIXME pick up ep0 maxpacket size */
+
+	for (epnum = 1; epnum < musb->config->num_eps; epnum++) {
+		musb_ep_select(mbase, epnum);
+		hw_ep = musb->endpoints + epnum;
+
+		/* read from core using indexed model */
+		reg = musb_readb(hw_ep->regs, 0x10 + MUSB_FIFOSIZE);
+		if (!reg) {
+			/* 0's returned when no more endpoints */
+			break;
+		}
+		musb->nr_endpoints++;
+		musb->epmask |= (1 << epnum);
+
+		hw_ep->max_packet_sz_tx = 1 << (reg & 0x0f);
+
+		/* shared TX/RX FIFO? */
+		if ((reg & 0xf0) == 0xf0) {
+			hw_ep->max_packet_sz_rx = hw_ep->max_packet_sz_tx;
+			hw_ep->is_shared_fifo = true;
+			continue;
+		} else {
+			hw_ep->max_packet_sz_rx = 1 << ((reg & 0xf0) >> 4);
+			hw_ep->is_shared_fifo = false;
+		}
+
+		/* FIXME set up hw_ep->{rx,tx}_double_buffered */
+
+#ifdef CONFIG_USB_MUSB_HDRC_HCD
+		/* pick an RX/TX endpoint for bulk */
+		if (hw_ep->max_packet_sz_tx < 512
+				|| hw_ep->max_packet_sz_rx < 512)
+			continue;
+
+		/* REVISIT:  this algorithm is lazy, we should at least
+		 * try to pick a double buffered endpoint.
+		 */
+		if (musb->bulk_ep)
+			continue;
+		musb->bulk_ep = hw_ep;
+#endif
+	}
+
+#ifdef CONFIG_USB_MUSB_HDRC_HCD
+	if (!musb->bulk_ep) {
+		pr_debug("%s: missing bulk\n", musb_driver_name);
+		return -EINVAL;
+	}
+#endif
+
+	return 0;
+}
+
+enum { MUSB_CONTROLLER_MHDRC, MUSB_CONTROLLER_HDRC, };
+
+/* Initialize MUSB (M)HDRC part of the USB hardware subsystem;
+ * configure endpoints, or take their config from silicon
+ */
+static int __init musb_core_init(u16 musb_type, struct musb *musb)
+{
+#ifdef MUSB_AHB_ID
+	u32 data;
+#endif
+	u8 reg;
+	char *type;
+	u16 hwvers, rev_major, rev_minor;
+	char aInfo[78], aRevision[32], aDate[12];
+	void __iomem	*mbase = musb->mregs;
+	int		status = 0;
+	int		i;
+
+	/* log core options (read using indexed model) */
+	musb_ep_select(mbase, 0);
+	reg = musb_readb(mbase, 0x10 + MUSB_CONFIGDATA);
+
+	strcpy(aInfo, (reg & MUSB_CONFIGDATA_UTMIDW) ? "UTMI-16" : "UTMI-8");
+	if (reg & MUSB_CONFIGDATA_DYNFIFO)
+		strcat(aInfo, ", dyn FIFOs");
+	if (reg & MUSB_CONFIGDATA_MPRXE) {
+		strcat(aInfo, ", bulk combine");
+#ifdef C_MP_RX
+		musb->bulk_combine = true;
+#else
+		strcat(aInfo, " (X)");		/* no driver support */
+#endif
+	}
+	if (reg & MUSB_CONFIGDATA_MPTXE) {
+		strcat(aInfo, ", bulk split");
+#ifdef C_MP_TX
+		musb->bulk_split = true;
+#else
+		strcat(aInfo, " (X)");		/* no driver support */
+#endif
+	}
+	if (reg & MUSB_CONFIGDATA_HBRXE) {
+		strcat(aInfo, ", HB-ISO Rx");
+		strcat(aInfo, " (X)");		/* no driver support */
+	}
+	if (reg & MUSB_CONFIGDATA_HBTXE) {
+		strcat(aInfo, ", HB-ISO Tx");
+		strcat(aInfo, " (X)");		/* no driver support */
+	}
+	if (reg & MUSB_CONFIGDATA_SOFTCONE)
+		strcat(aInfo, ", SoftConn");
+
+	printk(KERN_DEBUG "%s: ConfigData=0x%02x (%s)\n",
+			musb_driver_name, reg, aInfo);
+
+#ifdef MUSB_AHB_ID
+	data = musb_readl(mbase, 0x404);
+	sprintf(aDate, "%04d-%02x-%02x", (data & 0xffff),
+		(data >> 16) & 0xff, (data >> 24) & 0xff);
+	/* FIXME ID2 and ID3 are unused */
+	data = musb_readl(mbase, 0x408);
+	printk(KERN_DEBUG "ID2=%lx\n", (long unsigned)data);
+	data = musb_readl(mbase, 0x40c);
+	printk(KERN_DEBUG "ID3=%lx\n", (long unsigned)data);
+	reg = musb_readb(mbase, 0x400);
+	musb_type = ('M' == reg) ? MUSB_CONTROLLER_MHDRC : MUSB_CONTROLLER_HDRC;
+#else
+	aDate[0] = 0;
+#endif
+	if (MUSB_CONTROLLER_MHDRC == musb_type) {
+		musb->is_multipoint = 1;
+		type = "M";
+	} else {
+		musb->is_multipoint = 0;
+		type = "";
+#ifdef CONFIG_USB_MUSB_HDRC_HCD
+#ifndef	CONFIG_USB_OTG_BLACKLIST_HUB
+		printk(KERN_ERR
+			"%s: kernel must blacklist external hubs\n",
+			musb_driver_name);
+#endif
+#endif
+	}
+
+	/* log release info */
+	hwvers = musb_readw(mbase, MUSB_HWVERS);
+	rev_major = (hwvers >> 10) & 0x1f;
+	rev_minor = hwvers & 0x3ff;
+	snprintf(aRevision, 32, "%d.%d%s", rev_major,
+		rev_minor, (hwvers & 0x8000) ? "RC" : "");
+	printk(KERN_DEBUG "%s: %sHDRC RTL version %s %s\n",
+			musb_driver_name, type, aRevision, aDate);
+
+	/* configure ep0 */
+	musb->endpoints[0].max_packet_sz_tx = MUSB_EP0_FIFOSIZE;
+	musb->endpoints[0].max_packet_sz_rx = MUSB_EP0_FIFOSIZE;
+
+	/* discover endpoint configuration */
+	musb->nr_endpoints = 1;
+	musb->epmask = 1;
+
+	if (reg & MUSB_CONFIGDATA_DYNFIFO) {
+		if (musb->config->dyn_fifo)
+			status = ep_config_from_table(musb);
+		else {
+			ERR("reconfigure software for Dynamic FIFOs\n");
+			status = -ENODEV;
+		}
+	} else {
+		if (!musb->config->dyn_fifo)
+			status = ep_config_from_hw(musb);
+		else {
+			ERR("reconfigure software for static FIFOs\n");
+			return -ENODEV;
+		}
+	}
+
+	if (status < 0)
+		return status;
+
+	/* finish init, and print endpoint config */
+	for (i = 0; i < musb->nr_endpoints; i++) {
+		struct musb_hw_ep	*hw_ep = musb->endpoints + i;
+
+		hw_ep->fifo = MUSB_FIFO_OFFSET(i) + mbase;
+#ifdef CONFIG_USB_TUSB6010
+		hw_ep->fifo_async = musb->async + 0x400 + MUSB_FIFO_OFFSET(i);
+		hw_ep->fifo_sync = musb->sync + 0x400 + MUSB_FIFO_OFFSET(i);
+		hw_ep->fifo_sync_va =
+			musb->sync_va + 0x400 + MUSB_FIFO_OFFSET(i);
+
+		if (i == 0)
+			hw_ep->conf = mbase - 0x400 + TUSB_EP0_CONF;
+		else
+			hw_ep->conf = mbase + 0x400 + (((i - 1) & 0xf) << 2);
+#endif
+
+		hw_ep->regs = MUSB_EP_OFFSET(i, 0) + mbase;
+#ifdef CONFIG_USB_MUSB_HDRC_HCD
+		hw_ep->target_regs = MUSB_BUSCTL_OFFSET(i, 0) + mbase;
+		hw_ep->rx_reinit = 1;
+		hw_ep->tx_reinit = 1;
+#endif
+
+		if (hw_ep->max_packet_sz_tx) {
+			printk(KERN_DEBUG
+				"%s: hw_ep %d%s, %smax %d\n",
+				musb_driver_name, i,
+				hw_ep->is_shared_fifo ? "shared" : "tx",
+				hw_ep->tx_double_buffered
+					? "doublebuffer, " : "",
+				hw_ep->max_packet_sz_tx);
+		}
+		if (hw_ep->max_packet_sz_rx && !hw_ep->is_shared_fifo) {
+			printk(KERN_DEBUG
+				"%s: hw_ep %d%s, %smax %d\n",
+				musb_driver_name, i,
+				"rx",
+				hw_ep->rx_double_buffered
+					? "doublebuffer, " : "",
+				hw_ep->max_packet_sz_rx);
+		}
+		if (!(hw_ep->max_packet_sz_tx || hw_ep->max_packet_sz_rx))
+			DBG(1, "hw_ep %d not configured\n", i);
+	}
+
+	return 0;
+}
+
+/*-------------------------------------------------------------------------*/
+
+#if defined(CONFIG_ARCH_OMAP2430) || defined(CONFIG_ARCH_OMAP3430)
+
+static irqreturn_t generic_interrupt(int irq, void *__hci)
+{
+	unsigned long	flags;
+	irqreturn_t	retval = IRQ_NONE;
+	struct musb	*musb = __hci;
+
+	spin_lock_irqsave(&musb->lock, flags);
+
+	musb->int_usb = musb_readb(musb->mregs, MUSB_INTRUSB);
+	musb->int_tx = musb_readw(musb->mregs, MUSB_INTRTX);
+	musb->int_rx = musb_readw(musb->mregs, MUSB_INTRRX);
+
+	if (musb->int_usb || musb->int_tx || musb->int_rx)
+		retval = musb_interrupt(musb);
+
+	spin_unlock_irqrestore(&musb->lock, flags);
+
+	/* REVISIT we sometimes get spurious IRQs on g_ep0
+	 * not clear why...
+	 */
+	if (retval != IRQ_HANDLED)
+		DBG(5, "spurious?\n");
+
+	return IRQ_HANDLED;
+}
+
+#else
+#define generic_interrupt	NULL
+#endif
+
+/*
+ * handle all the irqs defined by the HDRC core. for now we expect:  other
+ * irq sources (phy, dma, etc) will be handled first, musb->int_* values
+ * will be assigned, and the irq will already have been acked.
+ *
+ * called in irq context with spinlock held, irqs blocked
+ */
+irqreturn_t musb_interrupt(struct musb *musb)
+{
+	irqreturn_t	retval = IRQ_NONE;
+	u8		devctl, power;
+	int		ep_num;
+	u32		reg;
+
+	devctl = musb_readb(musb->mregs, MUSB_DEVCTL);
+	power = musb_readb(musb->mregs, MUSB_POWER);
+
+	DBG(4, "** IRQ %s usb%04x tx%04x rx%04x\n",
+		(devctl & MUSB_DEVCTL_HM) ? "host" : "peripheral",
+		musb->int_usb, musb->int_tx, musb->int_rx);
+
+	/* the core can interrupt us for multiple reasons; docs have
+	 * a generic interrupt flowchart to follow
+	 */
+	if (musb->int_usb & STAGE0_MASK)
+		retval |= musb_stage0_irq(musb, musb->int_usb,
+				devctl, power);
+
+	/* "stage 1" is handling endpoint irqs */
+
+	/* handle endpoint 0 first */
+	if (musb->int_tx & 1) {
+		if (devctl & MUSB_DEVCTL_HM)
+			retval |= musb_h_ep0_irq(musb);
+		else
+			retval |= musb_g_ep0_irq(musb);
+	}
+
+	/* RX on endpoints 1-15 */
+	reg = musb->int_rx >> 1;
+	ep_num = 1;
+	while (reg) {
+		if (reg & 1) {
+			/* musb_ep_select(musb->mregs, ep_num); */
+			/* REVISIT just retval = ep->rx_irq(...) */
+			retval = IRQ_HANDLED;
+			if (devctl & MUSB_DEVCTL_HM) {
+				if (is_host_capable())
+					musb_host_rx(musb, ep_num);
+			} else {
+				if (is_peripheral_capable())
+					musb_g_rx(musb, ep_num);
+			}
+		}
+
+		reg >>= 1;
+		ep_num++;
+	}
+
+	/* TX on endpoints 1-15 */
+	reg = musb->int_tx >> 1;
+	ep_num = 1;
+	while (reg) {
+		if (reg & 1) {
+			/* musb_ep_select(musb->mregs, ep_num); */
+			/* REVISIT just retval |= ep->tx_irq(...) */
+			retval = IRQ_HANDLED;
+			if (devctl & MUSB_DEVCTL_HM) {
+				if (is_host_capable())
+					musb_host_tx(musb, ep_num);
+			} else {
+				if (is_peripheral_capable())
+					musb_g_tx(musb, ep_num);
+			}
+		}
+		reg >>= 1;
+		ep_num++;
+	}
+
+	/* finish handling "global" interrupts after handling fifos */
+	if (musb->int_usb)
+		retval |= musb_stage2_irq(musb,
+				musb->int_usb, devctl, power);
+
+	return retval;
+}
+
+
+#ifndef CONFIG_MUSB_PIO_ONLY
+static int __initdata use_dma = 1;
+
+/* "modprobe ... use_dma=0" etc */
+module_param(use_dma, bool, 0);
+MODULE_PARM_DESC(use_dma, "enable/disable use of DMA");
+
+void musb_dma_completion(struct musb *musb, u8 epnum, u8 transmit)
+{
+	u8	devctl = musb_readb(musb->mregs, MUSB_DEVCTL);
+
+	/* called with controller lock already held */
+
+	if (!epnum) {
+#ifndef CONFIG_USB_TUSB_OMAP_DMA
+		if (!is_cppi_enabled()) {
+			/* endpoint 0 */
+			if (devctl & MUSB_DEVCTL_HM)
+				musb_h_ep0_irq(musb);
+			else
+				musb_g_ep0_irq(musb);
+		}
+#endif
+	} else {
+		/* endpoints 1..15 */
+		if (transmit) {
+			if (devctl & MUSB_DEVCTL_HM) {
+				if (is_host_capable())
+					musb_host_tx(musb, epnum);
+			} else {
+				if (is_peripheral_capable())
+					musb_g_tx(musb, epnum);
+			}
+		} else {
+			/* receive */
+			if (devctl & MUSB_DEVCTL_HM) {
+				if (is_host_capable())
+					musb_host_rx(musb, epnum);
+			} else {
+				if (is_peripheral_capable())
+					musb_g_rx(musb, epnum);
+			}
+		}
+	}
+}
+
+#else
+#define use_dma			0
+#endif
+
+/*-------------------------------------------------------------------------*/
+
+#ifdef CONFIG_SYSFS
+
+static ssize_t
+musb_mode_show(struct device *dev, struct device_attribute *attr, char *buf)
+{
+	struct musb *musb = dev_to_musb(dev);
+	unsigned long flags;
+	int ret = -EINVAL;
+
+	spin_lock_irqsave(&musb->lock, flags);
+	ret = sprintf(buf, "%s\n", otg_state_string(musb));
+	spin_unlock_irqrestore(&musb->lock, flags);
+
+	return ret;
+}
+
+static ssize_t
+musb_mode_store(struct device *dev, struct device_attribute *attr,
+		const char *buf, size_t n)
+{
+	struct musb	*musb = dev_to_musb(dev);
+	unsigned long	flags;
+
+	spin_lock_irqsave(&musb->lock, flags);
+	if (!strncmp(buf, "host", 4))
+		musb_platform_set_mode(musb, MUSB_HOST);
+	if (!strncmp(buf, "peripheral", 10))
+		musb_platform_set_mode(musb, MUSB_PERIPHERAL);
+	if (!strncmp(buf, "otg", 3))
+		musb_platform_set_mode(musb, MUSB_OTG);
+	spin_unlock_irqrestore(&musb->lock, flags);
+
+	return n;
+}
+static DEVICE_ATTR(mode, 0644, musb_mode_show, musb_mode_store);
+
+static ssize_t
+musb_vbus_store(struct device *dev, struct device_attribute *attr,
+		const char *buf, size_t n)
+{
+	struct musb	*musb = dev_to_musb(dev);
+	unsigned long	flags;
+	unsigned long	val;
+
+	if (sscanf(buf, "%lu", &val) < 1) {
+		printk(KERN_ERR "Invalid VBUS timeout ms value\n");
+		return -EINVAL;
+	}
+
+	spin_lock_irqsave(&musb->lock, flags);
+	musb->a_wait_bcon = val;
+	if (musb->xceiv.state == OTG_STATE_A_WAIT_BCON)
+		musb->is_active = 0;
+	musb_platform_try_idle(musb, jiffies + msecs_to_jiffies(val));
+	spin_unlock_irqrestore(&musb->lock, flags);
+
+	return n;
+}
+
+static ssize_t
+musb_vbus_show(struct device *dev, struct device_attribute *attr, char *buf)
+{
+	struct musb	*musb = dev_to_musb(dev);
+	unsigned long	flags;
+	unsigned long	val;
+	int		vbus;
+
+	spin_lock_irqsave(&musb->lock, flags);
+	val = musb->a_wait_bcon;
+	vbus = musb_platform_get_vbus_status(musb);
+	spin_unlock_irqrestore(&musb->lock, flags);
+
+	return sprintf(buf, "Vbus %s, timeout %lu\n",
+			vbus ? "on" : "off", val);
+}
+static DEVICE_ATTR(vbus, 0644, musb_vbus_show, musb_vbus_store);
+
+#ifdef CONFIG_USB_GADGET_MUSB_HDRC
+
+/* Gadget drivers can't know that a host is connected so they might want
+ * to start SRP, but users can.  This allows userspace to trigger SRP.
+ */
+static ssize_t
+musb_srp_store(struct device *dev, struct device_attribute *attr,
+		const char *buf, size_t n)
+{
+	struct musb	*musb = dev_to_musb(dev);
+	unsigned short	srp;
+
+	if (sscanf(buf, "%hu", &srp) != 1
+			|| (srp != 1)) {
+		printk(KERN_ERR "SRP: Value must be 1\n");
+		return -EINVAL;
+	}
+
+	if (srp == 1)
+		musb_g_wakeup(musb);
+
+	return n;
+}
+static DEVICE_ATTR(srp, 0644, NULL, musb_srp_store);
+
+#endif /* CONFIG_USB_GADGET_MUSB_HDRC */
+
+#endif	/* sysfs */
+
+/* Only used to provide driver mode change events */
+static void musb_irq_work(struct work_struct *data)
+{
+	struct musb *musb = container_of(data, struct musb, irq_work);
+	static int old_state;
+
+	if (musb->xceiv.state != old_state) {
+		old_state = musb->xceiv.state;
+		sysfs_notify(&musb->controller->kobj, NULL, "mode");
+	}
+}
+
+/* --------------------------------------------------------------------------
+ * Init support
+ */
+
+static struct musb *__init
+allocate_instance(struct device *dev,
+		struct musb_hdrc_config *config, void __iomem *mbase)
+{
+	struct musb		*musb;
+	struct musb_hw_ep	*ep;
+	int			epnum;
+#ifdef CONFIG_USB_MUSB_HDRC_HCD
+	struct usb_hcd	*hcd;
+
+	hcd = usb_create_hcd(&musb_hc_driver, dev, dev->bus_id);
+	if (!hcd)
+		return NULL;
+	/* usbcore sets dev->driver_data to hcd, and sometimes uses that... */
+
+	musb = hcd_to_musb(hcd);
+	INIT_LIST_HEAD(&musb->control);
+	INIT_LIST_HEAD(&musb->in_bulk);
+	INIT_LIST_HEAD(&musb->out_bulk);
+
+	hcd->uses_new_polling = 1;
+
+	musb->vbuserr_retry = VBUSERR_RETRY_COUNT;
+#else
+	musb = kzalloc(sizeof *musb, GFP_KERNEL);
+	if (!musb)
+		return NULL;
+	dev_set_drvdata(dev, musb);
+
+#endif
+
+	musb->mregs = mbase;
+	musb->ctrl_base = mbase;
+	musb->nIrq = -ENODEV;
+	musb->config = config;
+	for (epnum = 0, ep = musb->endpoints;
+			epnum < musb->config->num_eps;
+			epnum++, ep++) {
+
+		ep->musb = musb;
+		ep->epnum = epnum;
+	}
+
+	musb->controller = dev;
+	return musb;
+}
+
+static void musb_free(struct musb *musb)
+{
+	/* this has multiple entry modes. it handles fault cleanup after
+	 * probe(), where things may be partially set up, as well as rmmod
+	 * cleanup after everything's been de-activated.
+	 */
+
+#ifdef CONFIG_SYSFS
+	device_remove_file(musb->controller, &dev_attr_mode);
+	device_remove_file(musb->controller, &dev_attr_vbus);
+#ifdef CONFIG_USB_MUSB_OTG
+	device_remove_file(musb->controller, &dev_attr_srp);
+#endif
+#endif
+
+#ifdef CONFIG_USB_GADGET_MUSB_HDRC
+	musb_gadget_cleanup(musb);
+#endif
+
+	if (musb->nIrq >= 0) {
+		disable_irq_wake(musb->nIrq);
+		free_irq(musb->nIrq, musb);
+	}
+	if (is_dma_capable() && musb->dma_controller) {
+		struct dma_controller	*c = musb->dma_controller;
+
+		(void) c->stop(c);
+		dma_controller_destroy(c);
+	}
+
+	musb_writeb(musb->mregs, MUSB_DEVCTL, 0);
+	musb_platform_exit(musb);
+	musb_writeb(musb->mregs, MUSB_DEVCTL, 0);
+
+	if (musb->clock) {
+		clk_disable(musb->clock);
+		clk_put(musb->clock);
+	}
+
+#ifdef CONFIG_USB_MUSB_OTG
+	put_device(musb->xceiv.dev);
+#endif
+
+#ifdef CONFIG_USB_MUSB_HDRC_HCD
+	usb_put_hcd(musb_to_hcd(musb));
+#else
+	kfree(musb);
+#endif
+}
+
+/*
+ * Perform generic per-controller initialization.
+ *
+ * @pDevice: the controller (already clocked, etc)
+ * @nIrq: irq
+ * @mregs: virtual address of controller registers,
+ *	not yet corrected for platform-specific offsets
+ */
+static int __init
+musb_init_controller(struct device *dev, int nIrq, void __iomem *ctrl)
+{
+	int			status;
+	struct musb		*musb;
+	struct musb_hdrc_platform_data *plat = dev->platform_data;
+
+	/* The driver might handle more features than the board; OK.
+	 * Fail when the board needs a feature that's not enabled.
+	 */
+	if (!plat) {
+		dev_dbg(dev, "no platform_data?\n");
+		return -ENODEV;
+	}
+	switch (plat->mode) {
+	case MUSB_HOST:
+#ifdef CONFIG_USB_MUSB_HDRC_HCD
+		break;
+#else
+		goto bad_config;
+#endif
+	case MUSB_PERIPHERAL:
+#ifdef CONFIG_USB_GADGET_MUSB_HDRC
+		break;
+#else
+		goto bad_config;
+#endif
+	case MUSB_OTG:
+#ifdef CONFIG_USB_MUSB_OTG
+		break;
+#else
+bad_config:
+#endif
+	default:
+		dev_err(dev, "incompatible Kconfig role setting\n");
+		return -EINVAL;
+	}
+
+	/* allocate */
+	musb = allocate_instance(dev, plat->config, ctrl);
+	if (!musb)
+		return -ENOMEM;
+
+	spin_lock_init(&musb->lock);
+	musb->board_mode = plat->mode;
+	musb->board_set_power = plat->set_power;
+	musb->set_clock = plat->set_clock;
+	musb->min_power = plat->min_power;
+
+	/* Clock usage is chip-specific ... functional clock (DaVinci,
+	 * OMAP2430), or PHY ref (some TUSB6010 boards).  All this core
+	 * code does is make sure a clock handle is available; platform
+	 * code manages it during start/stop and suspend/resume.
+	 */
+	if (plat->clock) {
+		musb->clock = clk_get(dev, plat->clock);
+		if (IS_ERR(musb->clock)) {
+			status = PTR_ERR(musb->clock);
+			musb->clock = NULL;
+			goto fail;
+		}
+	}
+
+	/* assume vbus is off */
+
+	/* platform adjusts musb->mregs and musb->isr if needed,
+	 * and activates clocks
+	 */
+	musb->isr = generic_interrupt;
+	status = musb_platform_init(musb);
+
+	if (status < 0)
+		goto fail;
+	if (!musb->isr) {
+		status = -ENODEV;
+		goto fail2;
+	}
+
+#ifndef CONFIG_MUSB_PIO_ONLY
+	if (use_dma && dev->dma_mask) {
+		struct dma_controller	*c;
+
+		c = dma_controller_create(musb, musb->mregs);
+		musb->dma_controller = c;
+		if (c)
+			(void) c->start(c);
+	}
+#endif
+	/* ideally this would be abstracted in platform setup */
+	if (!is_dma_capable() || !musb->dma_controller)
+		dev->dma_mask = NULL;
+
+	/* be sure interrupts are disabled before connecting ISR */
+	musb_platform_disable(musb);
+	musb_generic_disable(musb);
+
+	/* setup musb parts of the core (especially endpoints) */
+	status = musb_core_init(plat->config->multipoint
+			? MUSB_CONTROLLER_MHDRC
+			: MUSB_CONTROLLER_HDRC, musb);
+	if (status < 0)
+		goto fail2;
+
+	/* Init IRQ workqueue before request_irq */
+	INIT_WORK(&musb->irq_work, musb_irq_work);
+
+	/* attach to the IRQ */
+	if (request_irq(nIrq, musb->isr, 0, dev->bus_id, musb)) {
+		dev_err(dev, "request_irq %d failed!\n", nIrq);
+		status = -ENODEV;
+		goto fail2;
+	}
+	musb->nIrq = nIrq;
+/* FIXME this handles wakeup irqs wrong */
+	if (enable_irq_wake(nIrq) == 0)
+		device_init_wakeup(dev, 1);
+
+	pr_info("%s: USB %s mode controller at %p using %s, IRQ %d\n",
+			musb_driver_name,
+			({char *s;
+			switch (musb->board_mode) {
+			case MUSB_HOST:		s = "Host"; break;
+			case MUSB_PERIPHERAL:	s = "Peripheral"; break;
+			default:		s = "OTG"; break;
+			}; s; }),
+			ctrl,
+			(is_dma_capable() && musb->dma_controller)
+				? "DMA" : "PIO",
+			musb->nIrq);
+
+#ifdef CONFIG_USB_MUSB_HDRC_HCD
+	/* host side needs more setup, except for no-host modes */
+	if (musb->board_mode != MUSB_PERIPHERAL) {
+		struct usb_hcd	*hcd = musb_to_hcd(musb);
+
+		if (musb->board_mode == MUSB_OTG)
+			hcd->self.otg_port = 1;
+		musb->xceiv.host = &hcd->self;
+		hcd->power_budget = 2 * (plat->power ? : 250);
+	}
+#endif				/* CONFIG_USB_MUSB_HDRC_HCD */
+
+	/* For the host-only role, we can activate right away.
+	 * (We expect the ID pin to be forcibly grounded!!)
+	 * Otherwise, wait till the gadget driver hooks up.
+	 */
+	if (!is_otg_enabled(musb) && is_host_enabled(musb)) {
+		MUSB_HST_MODE(musb);
+		musb->xceiv.default_a = 1;
+		musb->xceiv.state = OTG_STATE_A_IDLE;
+
+		status = usb_add_hcd(musb_to_hcd(musb), -1, 0);
+		if (status)
+			goto fail;
+
+		DBG(1, "%s mode, status %d, devctl %02x %c\n",
+			"HOST", status,
+			musb_readb(musb->mregs, MUSB_DEVCTL),
+			(musb_readb(musb->mregs, MUSB_DEVCTL)
+					& MUSB_DEVCTL_BDEVICE
+				? 'B' : 'A'));
+
+	} else /* peripheral is enabled */ {
+		MUSB_DEV_MODE(musb);
+		musb->xceiv.default_a = 0;
+		musb->xceiv.state = OTG_STATE_B_IDLE;
+
+		status = musb_gadget_setup(musb);
+		if (status)
+			goto fail;
+
+		DBG(1, "%s mode, status %d, dev%02x\n",
+			is_otg_enabled(musb) ? "OTG" : "PERIPHERAL",
+			status,
+			musb_readb(musb->mregs, MUSB_DEVCTL));
+
+	}
+
+	return 0;
+
+fail:
+	if (musb->clock)
+		clk_put(musb->clock);
+	device_init_wakeup(dev, 0);
+	musb_free(musb);
+	return status;
+
+#ifdef CONFIG_SYSFS
+	status = device_create_file(dev, &dev_attr_mode);
+	status = device_create_file(dev, &dev_attr_vbus);
+#ifdef CONFIG_USB_GADGET_MUSB_HDRC
+	status = device_create_file(dev, &dev_attr_srp);
+#endif /* CONFIG_USB_GADGET_MUSB_HDRC */
+	status = 0;
+#endif
+
+	return status;
+
+fail2:
+	musb_platform_exit(musb);
+	goto fail;
+}
+
+/*-------------------------------------------------------------------------*/
+
+/* all implementations (PCI bridge to FPGA, VLYNQ, etc) should just
+ * bridge to a platform device; this driver then suffices.
+ */
+
+#ifndef CONFIG_MUSB_PIO_ONLY
+static u64	*orig_dma_mask;
+#endif
+
+static int __init musb_probe(struct platform_device *pdev)
+{
+	struct device	*dev = &pdev->dev;
+	int		irq = platform_get_irq(pdev, 0);
+	struct resource	*iomem;
+	void __iomem	*base;
+
+	iomem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!iomem || irq == 0)
+		return -ENODEV;
+
+	base = ioremap(iomem->start, iomem->end - iomem->start + 1);
+	if (!base) {
+		dev_err(dev, "ioremap failed\n");
+		return -ENOMEM;
+	}
+
+#ifndef CONFIG_MUSB_PIO_ONLY
+	/* clobbered by use_dma=n */
+	orig_dma_mask = dev->dma_mask;
+#endif
+	return musb_init_controller(dev, irq, base);
+}
+
+static int __devexit musb_remove(struct platform_device *pdev)
+{
+	struct musb	*musb = dev_to_musb(&pdev->dev);
+	void __iomem	*ctrl_base = musb->ctrl_base;
+
+	/* this gets called on rmmod.
+	 *  - Host mode: host may still be active
+	 *  - Peripheral mode: peripheral is deactivated (or never-activated)
+	 *  - OTG mode: both roles are deactivated (or never-activated)
+	 */
+	musb_shutdown(pdev);
+#ifdef CONFIG_USB_MUSB_HDRC_HCD
+	if (musb->board_mode == MUSB_HOST)
+		usb_remove_hcd(musb_to_hcd(musb));
+#endif
+	musb_free(musb);
+	iounmap(ctrl_base);
+	device_init_wakeup(&pdev->dev, 0);
+#ifndef CONFIG_MUSB_PIO_ONLY
+	pdev->dev.dma_mask = orig_dma_mask;
+#endif
+	return 0;
+}
+
+#ifdef	CONFIG_PM
+
+static int musb_suspend(struct platform_device *pdev, pm_message_t message)
+{
+	unsigned long	flags;
+	struct musb	*musb = dev_to_musb(&pdev->dev);
+
+	if (!musb->clock)
+		return 0;
+
+	spin_lock_irqsave(&musb->lock, flags);
+
+	if (is_peripheral_active(musb)) {
+		/* FIXME force disconnect unless we know USB will wake
+		 * the system up quickly enough to respond ...
+		 */
+	} else if (is_host_active(musb)) {
+		/* we know all the children are suspended; sometimes
+		 * they will even be wakeup-enabled.
+		 */
+	}
+
+	if (musb->set_clock)
+		musb->set_clock(musb->clock, 0);
+	else
+		clk_disable(musb->clock);
+	spin_unlock_irqrestore(&musb->lock, flags);
+	return 0;
+}
+
+static int musb_resume(struct platform_device *pdev)
+{
+	unsigned long	flags;
+	struct musb	*musb = dev_to_musb(&pdev->dev);
+
+	if (!musb->clock)
+		return 0;
+
+	spin_lock_irqsave(&musb->lock, flags);
+
+	if (musb->set_clock)
+		musb->set_clock(musb->clock, 1);
+	else
+		clk_enable(musb->clock);
+
+	/* for static cmos like DaVinci, register values were preserved
+	 * unless for some reason the whole soc powered down and we're
+	 * not treating that as a whole-system restart (e.g. swsusp)
+	 */
+	spin_unlock_irqrestore(&musb->lock, flags);
+	return 0;
+}
+
+#else
+#define	musb_suspend	NULL
+#define	musb_resume	NULL
+#endif
+
+static struct platform_driver musb_driver = {
+	.driver = {
+		.name		= (char *)musb_driver_name,
+		.bus		= &platform_bus_type,
+		.owner		= THIS_MODULE,
+	},
+	.remove		= __devexit_p(musb_remove),
+	.shutdown	= musb_shutdown,
+	.suspend	= musb_suspend,
+	.resume		= musb_resume,
+};
+
+/*-------------------------------------------------------------------------*/
+
+static int __init musb_init(void)
+{
+#ifdef CONFIG_USB_MUSB_HDRC_HCD
+	if (usb_disabled())
+		return 0;
+#endif
+
+	pr_info("%s: version " MUSB_VERSION ", "
+#ifdef CONFIG_MUSB_PIO_ONLY
+		"pio"
+#elif defined(CONFIG_USB_TI_CPPI_DMA)
+		"cppi-dma"
+#elif defined(CONFIG_USB_INVENTRA_DMA)
+		"musb-dma"
+#elif defined(CONFIG_USB_TUSB_OMAP_DMA)
+		"tusb-omap-dma"
+#else
+		"?dma?"
+#endif
+		", "
+#ifdef CONFIG_USB_MUSB_OTG
+		"otg (peripheral+host)"
+#elif defined(CONFIG_USB_GADGET_MUSB_HDRC)
+		"peripheral"
+#elif defined(CONFIG_USB_MUSB_HDRC_HCD)
+		"host"
+#endif
+		", debug=%d\n",
+		musb_driver_name, debug);
+	return platform_driver_probe(&musb_driver, musb_probe);
+}
+
+/* make us init after usbcore and before usb
+ * gadget and host-side drivers start to register
+ */
+subsys_initcall(musb_init);
+
+static void __exit musb_cleanup(void)
+{
+	platform_driver_unregister(&musb_driver);
+}
+module_exit(musb_cleanup);
diff --git a/drivers/usb/musb/musb_core.h b/drivers/usb/musb/musb_core.h
new file mode 100644
index 000000000000..82227251931b
--- /dev/null
+++ b/drivers/usb/musb/musb_core.h
@@ -0,0 +1,488 @@
+/*
+ * MUSB OTG driver defines
+ *
+ * Copyright 2005 Mentor Graphics Corporation
+ * Copyright (C) 2005-2006 by Texas Instruments
+ * Copyright (C) 2006-2007 Nokia Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ * THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
+ * NO EVENT SHALL THE AUTHORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ */
+
+#ifndef __MUSB_CORE_H__
+#define __MUSB_CORE_H__
+
+#include <linux/slab.h>
+#include <linux/list.h>
+#include <linux/interrupt.h>
+#include <linux/smp_lock.h>
+#include <linux/errno.h>
+#include <linux/clk.h>
+#include <linux/device.h>
+#include <linux/usb/ch9.h>
+#include <linux/usb/gadget.h>
+#include <linux/usb.h>
+#include <linux/usb/otg.h>
+#include <linux/usb/musb.h>
+
+struct musb;
+struct musb_hw_ep;
+struct musb_ep;
+
+
+#include "musb_debug.h"
+#include "musb_dma.h"
+
+#include "musb_io.h"
+#include "musb_regs.h"
+
+#include "musb_gadget.h"
+#include "../core/hcd.h"
+#include "musb_host.h"
+
+
+
+#ifdef CONFIG_USB_MUSB_OTG
+
+#define	is_peripheral_enabled(musb)	((musb)->board_mode != MUSB_HOST)
+#define	is_host_enabled(musb)		((musb)->board_mode != MUSB_PERIPHERAL)
+#define	is_otg_enabled(musb)		((musb)->board_mode == MUSB_OTG)
+
+/* NOTE:  otg and peripheral-only state machines start at B_IDLE.
+ * OTG or host-only go to A_IDLE when ID is sensed.
+ */
+#define is_peripheral_active(m)		(!(m)->is_host)
+#define is_host_active(m)		((m)->is_host)
+
+#else
+#define	is_peripheral_enabled(musb)	is_peripheral_capable()
+#define	is_host_enabled(musb)		is_host_capable()
+#define	is_otg_enabled(musb)		0
+
+#define	is_peripheral_active(musb)	is_peripheral_capable()
+#define	is_host_active(musb)		is_host_capable()
+#endif
+
+#if defined(CONFIG_USB_MUSB_OTG) || defined(CONFIG_USB_MUSB_PERIPHERAL)
+/* for some reason, the "select USB_GADGET_MUSB_HDRC" doesn't always
+ * override that choice selection (often USB_GADGET_DUMMY_HCD).
+ */
+#ifndef CONFIG_USB_GADGET_MUSB_HDRC
+#error bogus Kconfig output ... select CONFIG_USB_GADGET_MUSB_HDRC
+#endif
+#endif	/* need MUSB gadget selection */
+
+
+#ifdef CONFIG_PROC_FS
+#include <linux/fs.h>
+#define MUSB_CONFIG_PROC_FS
+#endif
+
+/****************************** PERIPHERAL ROLE *****************************/
+
+#ifdef CONFIG_USB_GADGET_MUSB_HDRC
+
+#define	is_peripheral_capable()	(1)
+
+extern irqreturn_t musb_g_ep0_irq(struct musb *);
+extern void musb_g_tx(struct musb *, u8);
+extern void musb_g_rx(struct musb *, u8);
+extern void musb_g_reset(struct musb *);
+extern void musb_g_suspend(struct musb *);
+extern void musb_g_resume(struct musb *);
+extern void musb_g_wakeup(struct musb *);
+extern void musb_g_disconnect(struct musb *);
+
+#else
+
+#define	is_peripheral_capable()	(0)
+
+static inline irqreturn_t musb_g_ep0_irq(struct musb *m) { return IRQ_NONE; }
+static inline void musb_g_reset(struct musb *m) {}
+static inline void musb_g_suspend(struct musb *m) {}
+static inline void musb_g_resume(struct musb *m) {}
+static inline void musb_g_wakeup(struct musb *m) {}
+static inline void musb_g_disconnect(struct musb *m) {}
+
+#endif
+
+/****************************** HOST ROLE ***********************************/
+
+#ifdef CONFIG_USB_MUSB_HDRC_HCD
+
+#define	is_host_capable()	(1)
+
+extern irqreturn_t musb_h_ep0_irq(struct musb *);
+extern void musb_host_tx(struct musb *, u8);
+extern void musb_host_rx(struct musb *, u8);
+
+#else
+
+#define	is_host_capable()	(0)
+
+static inline irqreturn_t musb_h_ep0_irq(struct musb *m) { return IRQ_NONE; }
+static inline void musb_host_tx(struct musb *m, u8 e) {}
+static inline void musb_host_rx(struct musb *m, u8 e) {}
+
+#endif
+
+
+/****************************** CONSTANTS ********************************/
+
+#ifndef MUSB_C_NUM_EPS
+#define MUSB_C_NUM_EPS ((u8)16)
+#endif
+
+#ifndef MUSB_MAX_END0_PACKET
+#define MUSB_MAX_END0_PACKET ((u16)MUSB_EP0_FIFOSIZE)
+#endif
+
+/* host side ep0 states */
+enum musb_h_ep0_state {
+	MUSB_EP0_IDLE,
+	MUSB_EP0_START,			/* expect ack of setup */
+	MUSB_EP0_IN,			/* expect IN DATA */
+	MUSB_EP0_OUT,			/* expect ack of OUT DATA */
+	MUSB_EP0_STATUS,		/* expect ack of STATUS */
+} __attribute__ ((packed));
+
+/* peripheral side ep0 states */
+enum musb_g_ep0_state {
+	MUSB_EP0_STAGE_SETUP,		/* idle, waiting for setup */
+	MUSB_EP0_STAGE_TX,		/* IN data */
+	MUSB_EP0_STAGE_RX,		/* OUT data */
+	MUSB_EP0_STAGE_STATUSIN,	/* (after OUT data) */
+	MUSB_EP0_STAGE_STATUSOUT,	/* (after IN data) */
+	MUSB_EP0_STAGE_ACKWAIT,		/* after zlp, before statusin */
+} __attribute__ ((packed));
+
+/* OTG protocol constants */
+#define OTG_TIME_A_WAIT_VRISE	100		/* msec (max) */
+#define OTG_TIME_A_WAIT_BCON	0		/* 0=infinite; min 1000 msec */
+#define OTG_TIME_A_IDLE_BDIS	200		/* msec (min) */
+
+/*************************** REGISTER ACCESS ********************************/
+
+/* Endpoint registers (other than dynfifo setup) can be accessed either
+ * directly with the "flat" model, or after setting up an index register.
+ */
+
+#if defined(CONFIG_ARCH_DAVINCI) || defined(CONFIG_ARCH_OMAP2430) \
+		|| defined(CONFIG_ARCH_OMAP3430)
+/* REVISIT indexed access seemed to
+ * misbehave (on DaVinci) for at least peripheral IN ...
+ */
+#define	MUSB_FLAT_REG
+#endif
+
+/* TUSB mapping: "flat" plus ep0 special cases */
+#if	defined(CONFIG_USB_TUSB6010)
+#define musb_ep_select(_mbase, _epnum) \
+	musb_writeb((_mbase), MUSB_INDEX, (_epnum))
+#define	MUSB_EP_OFFSET			MUSB_TUSB_OFFSET
+
+/* "flat" mapping: each endpoint has its own i/o address */
+#elif	defined(MUSB_FLAT_REG)
+#define musb_ep_select(_mbase, _epnum)	(((void)(_mbase)), ((void)(_epnum)))
+#define	MUSB_EP_OFFSET			MUSB_FLAT_OFFSET
+
+/* "indexed" mapping: INDEX register controls register bank select */
+#else
+#define musb_ep_select(_mbase, _epnum) \
+	musb_writeb((_mbase), MUSB_INDEX, (_epnum))
+#define	MUSB_EP_OFFSET			MUSB_INDEXED_OFFSET
+#endif
+
+/****************************** FUNCTIONS ********************************/
+
+#define MUSB_HST_MODE(_musb)\
+	{ (_musb)->is_host = true; }
+#define MUSB_DEV_MODE(_musb) \
+	{ (_musb)->is_host = false; }
+
+#define test_devctl_hst_mode(_x) \
+	(musb_readb((_x)->mregs, MUSB_DEVCTL)&MUSB_DEVCTL_HM)
+
+#define MUSB_MODE(musb) ((musb)->is_host ? "Host" : "Peripheral")
+
+/******************************** TYPES *************************************/
+
+/*
+ * struct musb_hw_ep - endpoint hardware (bidirectional)
+ *
+ * Ordered slightly for better cacheline locality.
+ */
+struct musb_hw_ep {
+	struct musb		*musb;
+	void __iomem		*fifo;
+	void __iomem		*regs;
+
+#ifdef CONFIG_USB_TUSB6010
+	void __iomem		*conf;
+#endif
+
+	/* index in musb->endpoints[]  */
+	u8			epnum;
+
+	/* hardware configuration, possibly dynamic */
+	bool			is_shared_fifo;
+	bool			tx_double_buffered;
+	bool			rx_double_buffered;
+	u16			max_packet_sz_tx;
+	u16			max_packet_sz_rx;
+
+	struct dma_channel	*tx_channel;
+	struct dma_channel	*rx_channel;
+
+#ifdef CONFIG_USB_TUSB6010
+	/* TUSB has "asynchronous" and "synchronous" dma modes */
+	dma_addr_t		fifo_async;
+	dma_addr_t		fifo_sync;
+	void __iomem		*fifo_sync_va;
+#endif
+
+#ifdef CONFIG_USB_MUSB_HDRC_HCD
+	void __iomem		*target_regs;
+
+	/* currently scheduled peripheral endpoint */
+	struct musb_qh		*in_qh;
+	struct musb_qh		*out_qh;
+
+	u8			rx_reinit;
+	u8			tx_reinit;
+#endif
+
+#ifdef CONFIG_USB_GADGET_MUSB_HDRC
+	/* peripheral side */
+	struct musb_ep		ep_in;			/* TX */
+	struct musb_ep		ep_out;			/* RX */
+#endif
+};
+
+static inline struct usb_request *next_in_request(struct musb_hw_ep *hw_ep)
+{
+#ifdef CONFIG_USB_GADGET_MUSB_HDRC
+	return next_request(&hw_ep->ep_in);
+#else
+	return NULL;
+#endif
+}
+
+static inline struct usb_request *next_out_request(struct musb_hw_ep *hw_ep)
+{
+#ifdef CONFIG_USB_GADGET_MUSB_HDRC
+	return next_request(&hw_ep->ep_out);
+#else
+	return NULL;
+#endif
+}
+
+/*
+ * struct musb - Driver instance data.
+ */
+struct musb {
+	/* device lock */
+	spinlock_t		lock;
+	struct clk		*clock;
+	irqreturn_t		(*isr)(int, void *);
+	struct work_struct	irq_work;
+
+/* this hub status bit is reserved by USB 2.0 and not seen by usbcore */
+#define MUSB_PORT_STAT_RESUME	(1 << 31)
+
+	u32			port1_status;
+
+#ifdef CONFIG_USB_MUSB_HDRC_HCD
+	unsigned long		rh_timer;
+
+	enum musb_h_ep0_state	ep0_stage;
+
+	/* bulk traffic normally dedicates endpoint hardware, and each
+	 * direction has its own ring of host side endpoints.
+	 * we try to progress the transfer at the head of each endpoint's
+	 * queue until it completes or NAKs too much; then we try the next
+	 * endpoint.
+	 */
+	struct musb_hw_ep	*bulk_ep;
+
+	struct list_head	control;	/* of musb_qh */
+	struct list_head	in_bulk;	/* of musb_qh */
+	struct list_head	out_bulk;	/* of musb_qh */
+	struct musb_qh		*periodic[32];	/* tree of interrupt+iso */
+#endif
+
+	/* called with IRQs blocked; ON/nonzero implies starting a session,
+	 * and waiting at least a_wait_vrise_tmout.
+	 */
+	void			(*board_set_vbus)(struct musb *, int is_on);
+
+	struct dma_controller	*dma_controller;
+
+	struct device		*controller;
+	void __iomem		*ctrl_base;
+	void __iomem		*mregs;
+
+#ifdef CONFIG_USB_TUSB6010
+	dma_addr_t		async;
+	dma_addr_t		sync;
+	void __iomem		*sync_va;
+#endif
+
+	/* passed down from chip/board specific irq handlers */
+	u8			int_usb;
+	u16			int_rx;
+	u16			int_tx;
+
+	struct otg_transceiver	xceiv;
+
+	int nIrq;
+
+	struct musb_hw_ep	 endpoints[MUSB_C_NUM_EPS];
+#define control_ep		endpoints
+
+#define VBUSERR_RETRY_COUNT	3
+	u16			vbuserr_retry;
+	u16 epmask;
+	u8 nr_endpoints;
+
+	u8 board_mode;		/* enum musb_mode */
+	int			(*board_set_power)(int state);
+
+	int			(*set_clock)(struct clk *clk, int is_active);
+
+	u8			min_power;	/* vbus for periph, in mA/2 */
+
+	bool			is_host;
+
+	int			a_wait_bcon;	/* VBUS timeout in msecs */
+	unsigned long		idle_timeout;	/* Next timeout in jiffies */
+
+	/* active means connected and not suspended */
+	unsigned		is_active:1;
+
+	unsigned is_multipoint:1;
+	unsigned ignore_disconnect:1;	/* during bus resets */
+
+#ifdef C_MP_TX
+	unsigned bulk_split:1;
+#define	can_bulk_split(musb,type) \
+		(((type) == USB_ENDPOINT_XFER_BULK) && (musb)->bulk_split)
+#else
+#define	can_bulk_split(musb, type)	0
+#endif
+
+#ifdef C_MP_RX
+	unsigned bulk_combine:1;
+#define	can_bulk_combine(musb,type) \
+		(((type) == USB_ENDPOINT_XFER_BULK) && (musb)->bulk_combine)
+#else
+#define	can_bulk_combine(musb, type)	0
+#endif
+
+#ifdef CONFIG_USB_GADGET_MUSB_HDRC
+	/* is_suspended means USB B_PERIPHERAL suspend */
+	unsigned		is_suspended:1;
+
+	/* may_wakeup means remote wakeup is enabled */
+	unsigned		may_wakeup:1;
+
+	/* is_self_powered is reported in device status and the
+	 * config descriptor.  is_bus_powered means B_PERIPHERAL
+	 * draws some VBUS current; both can be true.
+	 */
+	unsigned		is_self_powered:1;
+	unsigned		is_bus_powered:1;
+
+	unsigned		set_address:1;
+	unsigned		test_mode:1;
+	unsigned		softconnect:1;
+
+	u8			address;
+	u8			test_mode_nr;
+	u16			ackpend;		/* ep0 */
+	enum musb_g_ep0_state	ep0_state;
+	struct usb_gadget	g;			/* the gadget */
+	struct usb_gadget_driver *gadget_driver;	/* its driver */
+#endif
+
+	struct musb_hdrc_config	*config;
+
+#ifdef MUSB_CONFIG_PROC_FS
+	struct proc_dir_entry *proc_entry;
+#endif
+};
+
+static inline void musb_set_vbus(struct musb *musb, int is_on)
+{
+	musb->board_set_vbus(musb, is_on);
+}
+
+#ifdef CONFIG_USB_GADGET_MUSB_HDRC
+static inline struct musb *gadget_to_musb(struct usb_gadget *g)
+{
+	return container_of(g, struct musb, g);
+}
+#endif
+
+
+/***************************** Glue it together *****************************/
+
+extern const char musb_driver_name[];
+
+extern void musb_start(struct musb *musb);
+extern void musb_stop(struct musb *musb);
+
+extern void musb_write_fifo(struct musb_hw_ep *ep, u16 len, const u8 *src);
+extern void musb_read_fifo(struct musb_hw_ep *ep, u16 len, u8 *dst);
+
+extern void musb_load_testpacket(struct musb *);
+
+extern irqreturn_t musb_interrupt(struct musb *);
+
+extern void musb_platform_enable(struct musb *musb);
+extern void musb_platform_disable(struct musb *musb);
+
+extern void musb_hnp_stop(struct musb *musb);
+
+extern void musb_platform_set_mode(struct musb *musb, u8 musb_mode);
+
+#if defined(CONFIG_USB_TUSB6010) || \
+	defined(CONFIG_ARCH_OMAP2430) || defined(CONFIG_ARCH_OMAP34XX)
+extern void musb_platform_try_idle(struct musb *musb, unsigned long timeout);
+#else
+#define musb_platform_try_idle(x, y)		do {} while (0)
+#endif
+
+#ifdef CONFIG_USB_TUSB6010
+extern int musb_platform_get_vbus_status(struct musb *musb);
+#else
+#define musb_platform_get_vbus_status(x)	0
+#endif
+
+extern int __init musb_platform_init(struct musb *musb);
+extern int musb_platform_exit(struct musb *musb);
+
+#endif	/* __MUSB_CORE_H__ */
diff --git a/drivers/usb/musb/musb_debug.h b/drivers/usb/musb/musb_debug.h
new file mode 100644
index 000000000000..4d2794441b15
--- /dev/null
+++ b/drivers/usb/musb/musb_debug.h
@@ -0,0 +1,62 @@
+/*
+ * MUSB OTG driver debug defines
+ *
+ * Copyright 2005 Mentor Graphics Corporation
+ * Copyright (C) 2005-2006 by Texas Instruments
+ * Copyright (C) 2006-2007 Nokia Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ * THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
+ * NO EVENT SHALL THE AUTHORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ */
+
+#ifndef __MUSB_LINUX_DEBUG_H__
+#define __MUSB_LINUX_DEBUG_H__
+
+#define yprintk(facility, format, args...) \
+	do { printk(facility "%s %d: " format , \
+	__func__, __LINE__ , ## args); } while (0)
+#define WARNING(fmt, args...) yprintk(KERN_WARNING, fmt, ## args)
+#define INFO(fmt, args...) yprintk(KERN_INFO, fmt, ## args)
+#define ERR(fmt, args...) yprintk(KERN_ERR, fmt, ## args)
+
+#define xprintk(level, facility, format, args...) do { \
+	if (_dbg_level(level)) { \
+		printk(facility "%s %d: " format , \
+				__func__, __LINE__ , ## args); \
+	} } while (0)
+
+extern unsigned debug;
+
+static inline int _dbg_level(unsigned l)
+{
+	return debug >= l;
+}
+
+#define DBG(level, fmt, args...) xprintk(level, KERN_DEBUG, fmt, ## args)
+
+extern const char *otg_state_string(struct musb *);
+
+#endif				/*  __MUSB_LINUX_DEBUG_H__ */
diff --git a/drivers/usb/musb/musb_dma.h b/drivers/usb/musb/musb_dma.h
new file mode 100644
index 000000000000..0a2c4e3602c1
--- /dev/null
+++ b/drivers/usb/musb/musb_dma.h
@@ -0,0 +1,172 @@
+/*
+ * MUSB OTG driver DMA controller abstraction
+ *
+ * Copyright 2005 Mentor Graphics Corporation
+ * Copyright (C) 2005-2006 by Texas Instruments
+ * Copyright (C) 2006-2007 Nokia Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ * THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
+ * NO EVENT SHALL THE AUTHORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ */
+
+#ifndef __MUSB_DMA_H__
+#define __MUSB_DMA_H__
+
+struct musb_hw_ep;
+
+/*
+ * DMA Controller Abstraction
+ *
+ * DMA Controllers are abstracted to allow use of a variety of different
+ * implementations of DMA, as allowed by the Inventra USB cores.  On the
+ * host side, usbcore sets up the DMA mappings and flushes caches; on the
+ * peripheral side, the gadget controller driver does.  Responsibilities
+ * of a DMA controller driver include:
+ *
+ *  - Handling the details of moving multiple USB packets
+ *    in cooperation with the Inventra USB core, including especially
+ *    the correct RX side treatment of short packets and buffer-full
+ *    states (both of which terminate transfers).
+ *
+ *  - Knowing the correlation between dma channels and the
+ *    Inventra core's local endpoint resources and data direction.
+ *
+ *  - Maintaining a list of allocated/available channels.
+ *
+ *  - Updating channel status on interrupts,
+ *    whether shared with the Inventra core or separate.
+ */
+
+#define	DMA_ADDR_INVALID	(~(dma_addr_t)0)
+
+#ifndef CONFIG_MUSB_PIO_ONLY
+#define	is_dma_capable()	(1)
+#else
+#define	is_dma_capable()	(0)
+#endif
+
+#ifdef CONFIG_USB_TI_CPPI_DMA
+#define	is_cppi_enabled()	1
+#else
+#define	is_cppi_enabled()	0
+#endif
+
+#ifdef CONFIG_USB_TUSB_OMAP_DMA
+#define tusb_dma_omap()			1
+#else
+#define tusb_dma_omap()			0
+#endif
+
+/*
+ * DMA channel status ... updated by the dma controller driver whenever that
+ * status changes, and protected by the overall controller spinlock.
+ */
+enum dma_channel_status {
+	/* unallocated */
+	MUSB_DMA_STATUS_UNKNOWN,
+	/* allocated ... but not busy, no errors */
+	MUSB_DMA_STATUS_FREE,
+	/* busy ... transactions are active */
+	MUSB_DMA_STATUS_BUSY,
+	/* transaction(s) aborted due to ... dma or memory bus error */
+	MUSB_DMA_STATUS_BUS_ABORT,
+	/* transaction(s) aborted due to ... core error or USB fault */
+	MUSB_DMA_STATUS_CORE_ABORT
+};
+
+struct dma_controller;
+
+/**
+ * struct dma_channel - A DMA channel.
+ * @private_data: channel-private data
+ * @max_len: the maximum number of bytes the channel can move in one
+ *	transaction (typically representing many USB maximum-sized packets)
+ * @actual_len: how many bytes have been transferred
+ * @status: current channel status (updated e.g. on interrupt)
+ * @desired_mode: true if mode 1 is desired; false if mode 0 is desired
+ *
+ * channels are associated with an endpoint for the duration of at least
+ * one usb transfer.
+ */
+struct dma_channel {
+	void			*private_data;
+	/* FIXME not void* private_data, but a dma_controller * */
+	size_t			max_len;
+	size_t			actual_len;
+	enum dma_channel_status	status;
+	bool			desired_mode;
+};
+
+/*
+ * dma_channel_status - return status of dma channel
+ * @c: the channel
+ *
+ * Returns the software's view of the channel status.  If that status is BUSY
+ * then it's possible that the hardware has completed (or aborted) a transfer,
+ * so the driver needs to update that status.
+ */
+static inline enum dma_channel_status
+dma_channel_status(struct dma_channel *c)
+{
+	return (is_dma_capable() && c) ? c->status : MUSB_DMA_STATUS_UNKNOWN;
+}
+
+/**
+ * struct dma_controller - A DMA Controller.
+ * @start: call this to start a DMA controller;
+ *	return 0 on success, else negative errno
+ * @stop: call this to stop a DMA controller
+ *	return 0 on success, else negative errno
+ * @channel_alloc: call this to allocate a DMA channel
+ * @channel_release: call this to release a DMA channel
+ * @channel_abort: call this to abort a pending DMA transaction,
+ *	returning it to FREE (but allocated) state
+ *
+ * Controllers manage dma channels.
+ */
+struct dma_controller {
+	int			(*start)(struct dma_controller *);
+	int			(*stop)(struct dma_controller *);
+	struct dma_channel	*(*channel_alloc)(struct dma_controller *,
+					struct musb_hw_ep *, u8 is_tx);
+	void			(*channel_release)(struct dma_channel *);
+	int			(*channel_program)(struct dma_channel *channel,
+							u16 maxpacket, u8 mode,
+							dma_addr_t dma_addr,
+							u32 length);
+	int			(*channel_abort)(struct dma_channel *);
+};
+
+/* called after channel_program(), may indicate a fault */
+extern void musb_dma_completion(struct musb *musb, u8 epnum, u8 transmit);
+
+
+extern struct dma_controller *__init
+dma_controller_create(struct musb *, void __iomem *);
+
+extern void dma_controller_destroy(struct dma_controller *);
+
+#endif	/* __MUSB_DMA_H__ */
diff --git a/drivers/usb/musb/musb_gadget.c b/drivers/usb/musb/musb_gadget.c
new file mode 100644
index 000000000000..d6a802c224fa
--- /dev/null
+++ b/drivers/usb/musb/musb_gadget.c
@@ -0,0 +1,2031 @@
+/*
+ * MUSB OTG driver peripheral support
+ *
+ * Copyright 2005 Mentor Graphics Corporation
+ * Copyright (C) 2005-2006 by Texas Instruments
+ * Copyright (C) 2006-2007 Nokia Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ * THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
+ * NO EVENT SHALL THE AUTHORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/list.h>
+#include <linux/timer.h>
+#include <linux/module.h>
+#include <linux/smp.h>
+#include <linux/spinlock.h>
+#include <linux/delay.h>
+#include <linux/moduleparam.h>
+#include <linux/stat.h>
+#include <linux/dma-mapping.h>
+
+#include "musb_core.h"
+
+
+/* MUSB PERIPHERAL status 3-mar-2006:
+ *
+ * - EP0 seems solid.  It passes both USBCV and usbtest control cases.
+ *   Minor glitches:
+ *
+ *     + remote wakeup to Linux hosts work, but saw USBCV failures;
+ *       in one test run (operator error?)
+ *     + endpoint halt tests -- in both usbtest and usbcv -- seem
+ *       to break when dma is enabled ... is something wrongly
+ *       clearing SENDSTALL?
+ *
+ * - Mass storage behaved ok when last tested.  Network traffic patterns
+ *   (with lots of short transfers etc) need retesting; they turn up the
+ *   worst cases of the DMA, since short packets are typical but are not
+ *   required.
+ *
+ * - TX/IN
+ *     + both pio and dma behave in with network and g_zero tests
+ *     + no cppi throughput issues other than no-hw-queueing
+ *     + failed with FLAT_REG (DaVinci)
+ *     + seems to behave with double buffering, PIO -and- CPPI
+ *     + with gadgetfs + AIO, requests got lost?
+ *
+ * - RX/OUT
+ *     + both pio and dma behave in with network and g_zero tests
+ *     + dma is slow in typical case (short_not_ok is clear)
+ *     + double buffering ok with PIO
+ *     + double buffering *FAILS* with CPPI, wrong data bytes sometimes
+ *     + request lossage observed with gadgetfs
+ *
+ * - ISO not tested ... might work, but only weakly isochronous
+ *
+ * - Gadget driver disabling of softconnect during bind() is ignored; so
+ *   drivers can't hold off host requests until userspace is ready.
+ *   (Workaround:  they can turn it off later.)
+ *
+ * - PORTABILITY (assumes PIO works):
+ *     + DaVinci, basically works with cppi dma
+ *     + OMAP 2430, ditto with mentor dma
+ *     + TUSB 6010, platform-specific dma in the works
+ */
+
+/* ----------------------------------------------------------------------- */
+
+/*
+ * Immediately complete a request.
+ *
+ * @param request the request to complete
+ * @param status the status to complete the request with
+ * Context: controller locked, IRQs blocked.
+ */
+void musb_g_giveback(
+	struct musb_ep		*ep,
+	struct usb_request	*request,
+	int			status)
+__releases(ep->musb->lock)
+__acquires(ep->musb->lock)
+{
+	struct musb_request	*req;
+	struct musb		*musb;
+	int			busy = ep->busy;
+
+	req = to_musb_request(request);
+
+	list_del(&request->list);
+	if (req->request.status == -EINPROGRESS)
+		req->request.status = status;
+	musb = req->musb;
+
+	ep->busy = 1;
+	spin_unlock(&musb->lock);
+	if (is_dma_capable()) {
+		if (req->mapped) {
+			dma_unmap_single(musb->controller,
+					req->request.dma,
+					req->request.length,
+					req->tx
+						? DMA_TO_DEVICE
+						: DMA_FROM_DEVICE);
+			req->request.dma = DMA_ADDR_INVALID;
+			req->mapped = 0;
+		} else if (req->request.dma != DMA_ADDR_INVALID)
+			dma_sync_single_for_cpu(musb->controller,
+					req->request.dma,
+					req->request.length,
+					req->tx
+						? DMA_TO_DEVICE
+						: DMA_FROM_DEVICE);
+	}
+	if (request->status == 0)
+		DBG(5, "%s done request %p,  %d/%d\n",
+				ep->end_point.name, request,
+				req->request.actual, req->request.length);
+	else
+		DBG(2, "%s request %p, %d/%d fault %d\n",
+				ep->end_point.name, request,
+				req->request.actual, req->request.length,
+				request->status);
+	req->request.complete(&req->ep->end_point, &req->request);
+	spin_lock(&musb->lock);
+	ep->busy = busy;
+}
+
+/* ----------------------------------------------------------------------- */
+
+/*
+ * Abort requests queued to an endpoint using the status. Synchronous.
+ * caller locked controller and blocked irqs, and selected this ep.
+ */
+static void nuke(struct musb_ep *ep, const int status)
+{
+	struct musb_request	*req = NULL;
+	void __iomem *epio = ep->musb->endpoints[ep->current_epnum].regs;
+
+	ep->busy = 1;
+
+	if (is_dma_capable() && ep->dma) {
+		struct dma_controller	*c = ep->musb->dma_controller;
+		int value;
+		if (ep->is_in) {
+			musb_writew(epio, MUSB_TXCSR,
+					0 | MUSB_TXCSR_FLUSHFIFO);
+			musb_writew(epio, MUSB_TXCSR,
+					0 | MUSB_TXCSR_FLUSHFIFO);
+		} else {
+			musb_writew(epio, MUSB_RXCSR,
+					0 | MUSB_RXCSR_FLUSHFIFO);
+			musb_writew(epio, MUSB_RXCSR,
+					0 | MUSB_RXCSR_FLUSHFIFO);
+		}
+
+		value = c->channel_abort(ep->dma);
+		DBG(value ? 1 : 6, "%s: abort DMA --> %d\n", ep->name, value);
+		c->channel_release(ep->dma);
+		ep->dma = NULL;
+	}
+
+	while (!list_empty(&(ep->req_list))) {
+		req = container_of(ep->req_list.next, struct musb_request,
+				request.list);
+		musb_g_giveback(ep, &req->request, status);
+	}
+}
+
+/* ----------------------------------------------------------------------- */
+
+/* Data transfers - pure PIO, pure DMA, or mixed mode */
+
+/*
+ * This assumes the separate CPPI engine is responding to DMA requests
+ * from the usb core ... sequenced a bit differently from mentor dma.
+ */
+
+static inline int max_ep_writesize(struct musb *musb, struct musb_ep *ep)
+{
+	if (can_bulk_split(musb, ep->type))
+		return ep->hw_ep->max_packet_sz_tx;
+	else
+		return ep->packet_sz;
+}
+
+
+#ifdef CONFIG_USB_INVENTRA_DMA
+
+/* Peripheral tx (IN) using Mentor DMA works as follows:
+	Only mode 0 is used for transfers <= wPktSize,
+	mode 1 is used for larger transfers,
+
+	One of the following happens:
+	- Host sends IN token which causes an endpoint interrupt
+		-> TxAvail
+			-> if DMA is currently busy, exit.
+			-> if queue is non-empty, txstate().
+
+	- Request is queued by the gadget driver.
+		-> if queue was previously empty, txstate()
+
+	txstate()
+		-> start
+		  /\	-> setup DMA
+		  |     (data is transferred to the FIFO, then sent out when
+		  |	IN token(s) are recd from Host.
+		  |		-> DMA interrupt on completion
+		  |		   calls TxAvail.
+		  |		      -> stop DMA, ~DmaEenab,
+		  |		      -> set TxPktRdy for last short pkt or zlp
+		  |		      -> Complete Request
+		  |		      -> Continue next request (call txstate)
+		  |___________________________________|
+
+ * Non-Mentor DMA engines can of course work differently, such as by
+ * upleveling from irq-per-packet to irq-per-buffer.
+ */
+
+#endif
+
+/*
+ * An endpoint is transmitting data. This can be called either from
+ * the IRQ routine or from ep.queue() to kickstart a request on an
+ * endpoint.
+ *
+ * Context: controller locked, IRQs blocked, endpoint selected
+ */
+static void txstate(struct musb *musb, struct musb_request *req)
+{
+	u8			epnum = req->epnum;
+	struct musb_ep		*musb_ep;
+	void __iomem		*epio = musb->endpoints[epnum].regs;
+	struct usb_request	*request;
+	u16			fifo_count = 0, csr;
+	int			use_dma = 0;
+
+	musb_ep = req->ep;
+
+	/* we shouldn't get here while DMA is active ... but we do ... */
+	if (dma_channel_status(musb_ep->dma) == MUSB_DMA_STATUS_BUSY) {
+		DBG(4, "dma pending...\n");
+		return;
+	}
+
+	/* read TXCSR before */
+	csr = musb_readw(epio, MUSB_TXCSR);
+
+	request = &req->request;
+	fifo_count = min(max_ep_writesize(musb, musb_ep),
+			(int)(request->length - request->actual));
+
+	if (csr & MUSB_TXCSR_TXPKTRDY) {
+		DBG(5, "%s old packet still ready , txcsr %03x\n",
+				musb_ep->end_point.name, csr);
+		return;
+	}
+
+	if (csr & MUSB_TXCSR_P_SENDSTALL) {
+		DBG(5, "%s stalling, txcsr %03x\n",
+				musb_ep->end_point.name, csr);
+		return;
+	}
+
+	DBG(4, "hw_ep%d, maxpacket %d, fifo count %d, txcsr %03x\n",
+			epnum, musb_ep->packet_sz, fifo_count,
+			csr);
+
+#ifndef	CONFIG_MUSB_PIO_ONLY
+	if (is_dma_capable() && musb_ep->dma) {
+		struct dma_controller	*c = musb->dma_controller;
+
+		use_dma = (request->dma != DMA_ADDR_INVALID);
+
+		/* MUSB_TXCSR_P_ISO is still set correctly */
+
+#ifdef CONFIG_USB_INVENTRA_DMA
+		{
+			size_t request_size;
+
+			/* setup DMA, then program endpoint CSR */
+			request_size = min(request->length,
+						musb_ep->dma->max_len);
+			if (request_size <= musb_ep->packet_sz)
+				musb_ep->dma->desired_mode = 0;
+			else
+				musb_ep->dma->desired_mode = 1;
+
+			use_dma = use_dma && c->channel_program(
+					musb_ep->dma, musb_ep->packet_sz,
+					musb_ep->dma->desired_mode,
+					request->dma, request_size);
+			if (use_dma) {
+				if (musb_ep->dma->desired_mode == 0) {
+					/* ASSERT: DMAENAB is clear */
+					csr &= ~(MUSB_TXCSR_AUTOSET |
+							MUSB_TXCSR_DMAMODE);
+					csr |= (MUSB_TXCSR_DMAENAB |
+							MUSB_TXCSR_MODE);
+					/* against programming guide */
+				} else
+					csr |= (MUSB_TXCSR_AUTOSET
+							| MUSB_TXCSR_DMAENAB
+							| MUSB_TXCSR_DMAMODE
+							| MUSB_TXCSR_MODE);
+
+				csr &= ~MUSB_TXCSR_P_UNDERRUN;
+				musb_writew(epio, MUSB_TXCSR, csr);
+			}
+		}
+
+#elif defined(CONFIG_USB_TI_CPPI_DMA)
+		/* program endpoint CSR first, then setup DMA */
+		csr &= ~(MUSB_TXCSR_AUTOSET
+				| MUSB_TXCSR_DMAMODE
+				| MUSB_TXCSR_P_UNDERRUN
+				| MUSB_TXCSR_TXPKTRDY);
+		csr |= MUSB_TXCSR_MODE | MUSB_TXCSR_DMAENAB;
+		musb_writew(epio, MUSB_TXCSR,
+			(MUSB_TXCSR_P_WZC_BITS & ~MUSB_TXCSR_P_UNDERRUN)
+				| csr);
+
+		/* ensure writebuffer is empty */
+		csr = musb_readw(epio, MUSB_TXCSR);
+
+		/* NOTE host side sets DMAENAB later than this; both are
+		 * OK since the transfer dma glue (between CPPI and Mentor
+		 * fifos) just tells CPPI it could start.  Data only moves
+		 * to the USB TX fifo when both fifos are ready.
+		 */
+
+		/* "mode" is irrelevant here; handle terminating ZLPs like
+		 * PIO does, since the hardware RNDIS mode seems unreliable
+		 * except for the last-packet-is-already-short case.
+		 */
+		use_dma = use_dma && c->channel_program(
+				musb_ep->dma, musb_ep->packet_sz,
+				0,
+				request->dma,
+				request->length);
+		if (!use_dma) {
+			c->channel_release(musb_ep->dma);
+			musb_ep->dma = NULL;
+			/* ASSERT: DMAENAB clear */
+			csr &= ~(MUSB_TXCSR_DMAMODE | MUSB_TXCSR_MODE);
+			/* invariant: prequest->buf is non-null */
+		}
+#elif defined(CONFIG_USB_TUSB_OMAP_DMA)
+		use_dma = use_dma && c->channel_program(
+				musb_ep->dma, musb_ep->packet_sz,
+				request->zero,
+				request->dma,
+				request->length);
+#endif
+	}
+#endif
+
+	if (!use_dma) {
+		musb_write_fifo(musb_ep->hw_ep, fifo_count,
+				(u8 *) (request->buf + request->actual));
+		request->actual += fifo_count;
+		csr |= MUSB_TXCSR_TXPKTRDY;
+		csr &= ~MUSB_TXCSR_P_UNDERRUN;
+		musb_writew(epio, MUSB_TXCSR, csr);
+	}
+
+	/* host may already have the data when this message shows... */
+	DBG(3, "%s TX/IN %s len %d/%d, txcsr %04x, fifo %d/%d\n",
+			musb_ep->end_point.name, use_dma ? "dma" : "pio",
+			request->actual, request->length,
+			musb_readw(epio, MUSB_TXCSR),
+			fifo_count,
+			musb_readw(epio, MUSB_TXMAXP));
+}
+
+/*
+ * FIFO state update (e.g. data ready).
+ * Called from IRQ,  with controller locked.
+ */
+void musb_g_tx(struct musb *musb, u8 epnum)
+{
+	u16			csr;
+	struct usb_request	*request;
+	u8 __iomem		*mbase = musb->mregs;
+	struct musb_ep		*musb_ep = &musb->endpoints[epnum].ep_in;
+	void __iomem		*epio = musb->endpoints[epnum].regs;
+	struct dma_channel	*dma;
+
+	musb_ep_select(mbase, epnum);
+	request = next_request(musb_ep);
+
+	csr = musb_readw(epio, MUSB_TXCSR);
+	DBG(4, "<== %s, txcsr %04x\n", musb_ep->end_point.name, csr);
+
+	dma = is_dma_capable() ? musb_ep->dma : NULL;
+	do {
+		/* REVISIT for high bandwidth, MUSB_TXCSR_P_INCOMPTX
+		 * probably rates reporting as a host error
+		 */
+		if (csr & MUSB_TXCSR_P_SENTSTALL) {
+			csr |= MUSB_TXCSR_P_WZC_BITS;
+			csr &= ~MUSB_TXCSR_P_SENTSTALL;
+			musb_writew(epio, MUSB_TXCSR, csr);
+			if (dma_channel_status(dma) == MUSB_DMA_STATUS_BUSY) {
+				dma->status = MUSB_DMA_STATUS_CORE_ABORT;
+				musb->dma_controller->channel_abort(dma);
+			}
+
+			if (request)
+				musb_g_giveback(musb_ep, request, -EPIPE);
+
+			break;
+		}
+
+		if (csr & MUSB_TXCSR_P_UNDERRUN) {
+			/* we NAKed, no big deal ... little reason to care */
+			csr |= MUSB_TXCSR_P_WZC_BITS;
+			csr &= ~(MUSB_TXCSR_P_UNDERRUN
+					| MUSB_TXCSR_TXPKTRDY);
+			musb_writew(epio, MUSB_TXCSR, csr);
+			DBG(20, "underrun on ep%d, req %p\n", epnum, request);
+		}
+
+		if (dma_channel_status(dma) == MUSB_DMA_STATUS_BUSY) {
+			/* SHOULD NOT HAPPEN ... has with cppi though, after
+			 * changing SENDSTALL (and other cases); harmless?
+			 */
+			DBG(5, "%s dma still busy?\n", musb_ep->end_point.name);
+			break;
+		}
+
+		if (request) {
+			u8	is_dma = 0;
+
+			if (dma && (csr & MUSB_TXCSR_DMAENAB)) {
+				is_dma = 1;
+				csr |= MUSB_TXCSR_P_WZC_BITS;
+				csr &= ~(MUSB_TXCSR_DMAENAB
+						| MUSB_TXCSR_P_UNDERRUN
+						| MUSB_TXCSR_TXPKTRDY);
+				musb_writew(epio, MUSB_TXCSR, csr);
+				/* ensure writebuffer is empty */
+				csr = musb_readw(epio, MUSB_TXCSR);
+				request->actual += musb_ep->dma->actual_len;
+				DBG(4, "TXCSR%d %04x, dma off, "
+						"len %zu, req %p\n",
+					epnum, csr,
+					musb_ep->dma->actual_len,
+					request);
+			}
+
+			if (is_dma || request->actual == request->length) {
+
+				/* First, maybe a terminating short packet.
+				 * Some DMA engines might handle this by
+				 * themselves.
+				 */
+				if ((request->zero
+						&& request->length
+						&& (request->length
+							% musb_ep->packet_sz)
+							== 0)
+#ifdef CONFIG_USB_INVENTRA_DMA
+					|| (is_dma &&
+						((!dma->desired_mode) ||
+						    (request->actual &
+						    (musb_ep->packet_sz - 1))))
+#endif
+				) {
+					/* on dma completion, fifo may not
+					 * be available yet ...
+					 */
+					if (csr & MUSB_TXCSR_TXPKTRDY)
+						break;
+
+					DBG(4, "sending zero pkt\n");
+					musb_writew(epio, MUSB_TXCSR,
+							MUSB_TXCSR_MODE
+							| MUSB_TXCSR_TXPKTRDY);
+					request->zero = 0;
+				}
+
+				/* ... or if not, then complete it */
+				musb_g_giveback(musb_ep, request, 0);
+
+				/* kickstart next transfer if appropriate;
+				 * the packet that just completed might not
+				 * be transmitted for hours or days.
+				 * REVISIT for double buffering...
+				 * FIXME revisit for stalls too...
+				 */
+				musb_ep_select(mbase, epnum);
+				csr = musb_readw(epio, MUSB_TXCSR);
+				if (csr & MUSB_TXCSR_FIFONOTEMPTY)
+					break;
+				request = musb_ep->desc
+						? next_request(musb_ep)
+						: NULL;
+				if (!request) {
+					DBG(4, "%s idle now\n",
+						musb_ep->end_point.name);
+					break;
+				}
+			}
+
+			txstate(musb, to_musb_request(request));
+		}
+
+	} while (0);
+}
+
+/* ------------------------------------------------------------ */
+
+#ifdef CONFIG_USB_INVENTRA_DMA
+
+/* Peripheral rx (OUT) using Mentor DMA works as follows:
+	- Only mode 0 is used.
+
+	- Request is queued by the gadget class driver.
+		-> if queue was previously empty, rxstate()
+
+	- Host sends OUT token which causes an endpoint interrupt
+	  /\      -> RxReady
+	  |	      -> if request queued, call rxstate
+	  |		/\	-> setup DMA
+	  |		|	     -> DMA interrupt on completion
+	  |		|		-> RxReady
+	  |		|		      -> stop DMA
+	  |		|		      -> ack the read
+	  |		|		      -> if data recd = max expected
+	  |		|				by the request, or host
+	  |		|				sent a short packet,
+	  |		|				complete the request,
+	  |		|				and start the next one.
+	  |		|_____________________________________|
+	  |					 else just wait for the host
+	  |					    to send the next OUT token.
+	  |__________________________________________________|
+
+ * Non-Mentor DMA engines can of course work differently.
+ */
+
+#endif
+
+/*
+ * Context: controller locked, IRQs blocked, endpoint selected
+ */
+static void rxstate(struct musb *musb, struct musb_request *req)
+{
+	u16			csr = 0;
+	const u8		epnum = req->epnum;
+	struct usb_request	*request = &req->request;
+	struct musb_ep		*musb_ep = &musb->endpoints[epnum].ep_out;
+	void __iomem		*epio = musb->endpoints[epnum].regs;
+	u16			fifo_count = 0;
+	u16			len = musb_ep->packet_sz;
+
+	csr = musb_readw(epio, MUSB_RXCSR);
+
+	if (is_cppi_enabled() && musb_ep->dma) {
+		struct dma_controller	*c = musb->dma_controller;
+		struct dma_channel	*channel = musb_ep->dma;
+
+		/* NOTE:  CPPI won't actually stop advancing the DMA
+		 * queue after short packet transfers, so this is almost
+		 * always going to run as IRQ-per-packet DMA so that
+		 * faults will be handled correctly.
+		 */
+		if (c->channel_program(channel,
+				musb_ep->packet_sz,
+				!request->short_not_ok,
+				request->dma + request->actual,
+				request->length - request->actual)) {
+
+			/* make sure that if an rxpkt arrived after the irq,
+			 * the cppi engine will be ready to take it as soon
+			 * as DMA is enabled
+			 */
+			csr &= ~(MUSB_RXCSR_AUTOCLEAR
+					| MUSB_RXCSR_DMAMODE);
+			csr |= MUSB_RXCSR_DMAENAB | MUSB_RXCSR_P_WZC_BITS;
+			musb_writew(epio, MUSB_RXCSR, csr);
+			return;
+		}
+	}
+
+	if (csr & MUSB_RXCSR_RXPKTRDY) {
+		len = musb_readw(epio, MUSB_RXCOUNT);
+		if (request->actual < request->length) {
+#ifdef CONFIG_USB_INVENTRA_DMA
+			if (is_dma_capable() && musb_ep->dma) {
+				struct dma_controller	*c;
+				struct dma_channel	*channel;
+				int			use_dma = 0;
+
+				c = musb->dma_controller;
+				channel = musb_ep->dma;
+
+	/* We use DMA Req mode 0 in rx_csr, and DMA controller operates in
+	 * mode 0 only. So we do not get endpoint interrupts due to DMA
+	 * completion. We only get interrupts from DMA controller.
+	 *
+	 * We could operate in DMA mode 1 if we knew the size of the tranfer
+	 * in advance. For mass storage class, request->length = what the host
+	 * sends, so that'd work.  But for pretty much everything else,
+	 * request->length is routinely more than what the host sends. For
+	 * most these gadgets, end of is signified either by a short packet,
+	 * or filling the last byte of the buffer.  (Sending extra data in
+	 * that last pckate should trigger an overflow fault.)  But in mode 1,
+	 * we don't get DMA completion interrrupt for short packets.
+	 *
+	 * Theoretically, we could enable DMAReq irq (MUSB_RXCSR_DMAMODE = 1),
+	 * to get endpoint interrupt on every DMA req, but that didn't seem
+	 * to work reliably.
+	 *
+	 * REVISIT an updated g_file_storage can set req->short_not_ok, which
+	 * then becomes usable as a runtime "use mode 1" hint...
+	 */
+
+				csr |= MUSB_RXCSR_DMAENAB;
+#ifdef USE_MODE1
+				csr |= MUSB_RXCSR_AUTOCLEAR;
+				/* csr |= MUSB_RXCSR_DMAMODE; */
+
+				/* this special sequence (enabling and then
+				 * disabling MUSB_RXCSR_DMAMODE) is required
+				 * to get DMAReq to activate
+				 */
+				musb_writew(epio, MUSB_RXCSR,
+					csr | MUSB_RXCSR_DMAMODE);
+#endif
+				musb_writew(epio, MUSB_RXCSR, csr);
+
+				if (request->actual < request->length) {
+					int transfer_size = 0;
+#ifdef USE_MODE1
+					transfer_size = min(request->length,
+							channel->max_len);
+#else
+					transfer_size = len;
+#endif
+					if (transfer_size <= musb_ep->packet_sz)
+						musb_ep->dma->desired_mode = 0;
+					else
+						musb_ep->dma->desired_mode = 1;
+
+					use_dma = c->channel_program(
+							channel,
+							musb_ep->packet_sz,
+							channel->desired_mode,
+							request->dma
+							+ request->actual,
+							transfer_size);
+				}
+
+				if (use_dma)
+					return;
+			}
+#endif	/* Mentor's DMA */
+
+			fifo_count = request->length - request->actual;
+			DBG(3, "%s OUT/RX pio fifo %d/%d, maxpacket %d\n",
+					musb_ep->end_point.name,
+					len, fifo_count,
+					musb_ep->packet_sz);
+
+			fifo_count = min(len, fifo_count);
+
+#ifdef	CONFIG_USB_TUSB_OMAP_DMA
+			if (tusb_dma_omap() && musb_ep->dma) {
+				struct dma_controller *c = musb->dma_controller;
+				struct dma_channel *channel = musb_ep->dma;
+				u32 dma_addr = request->dma + request->actual;
+				int ret;
+
+				ret = c->channel_program(channel,
+						musb_ep->packet_sz,
+						channel->desired_mode,
+						dma_addr,
+						fifo_count);
+				if (ret)
+					return;
+			}
+#endif
+
+			musb_read_fifo(musb_ep->hw_ep, fifo_count, (u8 *)
+					(request->buf + request->actual));
+			request->actual += fifo_count;
+
+			/* REVISIT if we left anything in the fifo, flush
+			 * it and report -EOVERFLOW
+			 */
+
+			/* ack the read! */
+			csr |= MUSB_RXCSR_P_WZC_BITS;
+			csr &= ~MUSB_RXCSR_RXPKTRDY;
+			musb_writew(epio, MUSB_RXCSR, csr);
+		}
+	}
+
+	/* reach the end or short packet detected */
+	if (request->actual == request->length || len < musb_ep->packet_sz)
+		musb_g_giveback(musb_ep, request, 0);
+}
+
+/*
+ * Data ready for a request; called from IRQ
+ */
+void musb_g_rx(struct musb *musb, u8 epnum)
+{
+	u16			csr;
+	struct usb_request	*request;
+	void __iomem		*mbase = musb->mregs;
+	struct musb_ep		*musb_ep = &musb->endpoints[epnum].ep_out;
+	void __iomem		*epio = musb->endpoints[epnum].regs;
+	struct dma_channel	*dma;
+
+	musb_ep_select(mbase, epnum);
+
+	request = next_request(musb_ep);
+
+	csr = musb_readw(epio, MUSB_RXCSR);
+	dma = is_dma_capable() ? musb_ep->dma : NULL;
+
+	DBG(4, "<== %s, rxcsr %04x%s %p\n", musb_ep->end_point.name,
+			csr, dma ? " (dma)" : "", request);
+
+	if (csr & MUSB_RXCSR_P_SENTSTALL) {
+		if (dma_channel_status(dma) == MUSB_DMA_STATUS_BUSY) {
+			dma->status = MUSB_DMA_STATUS_CORE_ABORT;
+			(void) musb->dma_controller->channel_abort(dma);
+			request->actual += musb_ep->dma->actual_len;
+		}
+
+		csr |= MUSB_RXCSR_P_WZC_BITS;
+		csr &= ~MUSB_RXCSR_P_SENTSTALL;
+		musb_writew(epio, MUSB_RXCSR, csr);
+
+		if (request)
+			musb_g_giveback(musb_ep, request, -EPIPE);
+		goto done;
+	}
+
+	if (csr & MUSB_RXCSR_P_OVERRUN) {
+		/* csr |= MUSB_RXCSR_P_WZC_BITS; */
+		csr &= ~MUSB_RXCSR_P_OVERRUN;
+		musb_writew(epio, MUSB_RXCSR, csr);
+
+		DBG(3, "%s iso overrun on %p\n", musb_ep->name, request);
+		if (request && request->status == -EINPROGRESS)
+			request->status = -EOVERFLOW;
+	}
+	if (csr & MUSB_RXCSR_INCOMPRX) {
+		/* REVISIT not necessarily an error */
+		DBG(4, "%s, incomprx\n", musb_ep->end_point.name);
+	}
+
+	if (dma_channel_status(dma) == MUSB_DMA_STATUS_BUSY) {
+		/* "should not happen"; likely RXPKTRDY pending for DMA */
+		DBG((csr & MUSB_RXCSR_DMAENAB) ? 4 : 1,
+			"%s busy, csr %04x\n",
+			musb_ep->end_point.name, csr);
+		goto done;
+	}
+
+	if (dma && (csr & MUSB_RXCSR_DMAENAB)) {
+		csr &= ~(MUSB_RXCSR_AUTOCLEAR
+				| MUSB_RXCSR_DMAENAB
+				| MUSB_RXCSR_DMAMODE);
+		musb_writew(epio, MUSB_RXCSR,
+			MUSB_RXCSR_P_WZC_BITS | csr);
+
+		request->actual += musb_ep->dma->actual_len;
+
+		DBG(4, "RXCSR%d %04x, dma off, %04x, len %zu, req %p\n",
+			epnum, csr,
+			musb_readw(epio, MUSB_RXCSR),
+			musb_ep->dma->actual_len, request);
+
+#if defined(CONFIG_USB_INVENTRA_DMA) || defined(CONFIG_USB_TUSB_OMAP_DMA)
+		/* Autoclear doesn't clear RxPktRdy for short packets */
+		if ((dma->desired_mode == 0)
+				|| (dma->actual_len
+					& (musb_ep->packet_sz - 1))) {
+			/* ack the read! */
+			csr &= ~MUSB_RXCSR_RXPKTRDY;
+			musb_writew(epio, MUSB_RXCSR, csr);
+		}
+
+		/* incomplete, and not short? wait for next IN packet */
+		if ((request->actual < request->length)
+				&& (musb_ep->dma->actual_len
+					== musb_ep->packet_sz))
+			goto done;
+#endif
+		musb_g_giveback(musb_ep, request, 0);
+
+		request = next_request(musb_ep);
+		if (!request)
+			goto done;
+
+		/* don't start more i/o till the stall clears */
+		musb_ep_select(mbase, epnum);
+		csr = musb_readw(epio, MUSB_RXCSR);
+		if (csr & MUSB_RXCSR_P_SENDSTALL)
+			goto done;
+	}
+
+
+	/* analyze request if the ep is hot */
+	if (request)
+		rxstate(musb, to_musb_request(request));
+	else
+		DBG(3, "packet waiting for %s%s request\n",
+				musb_ep->desc ? "" : "inactive ",
+				musb_ep->end_point.name);
+
+done:
+	return;
+}
+
+/* ------------------------------------------------------------ */
+
+static int musb_gadget_enable(struct usb_ep *ep,
+			const struct usb_endpoint_descriptor *desc)
+{
+	unsigned long		flags;
+	struct musb_ep		*musb_ep;
+	struct musb_hw_ep	*hw_ep;
+	void __iomem		*regs;
+	struct musb		*musb;
+	void __iomem	*mbase;
+	u8		epnum;
+	u16		csr;
+	unsigned	tmp;
+	int		status = -EINVAL;
+
+	if (!ep || !desc)
+		return -EINVAL;
+
+	musb_ep = to_musb_ep(ep);
+	hw_ep = musb_ep->hw_ep;
+	regs = hw_ep->regs;
+	musb = musb_ep->musb;
+	mbase = musb->mregs;
+	epnum = musb_ep->current_epnum;
+
+	spin_lock_irqsave(&musb->lock, flags);
+
+	if (musb_ep->desc) {
+		status = -EBUSY;
+		goto fail;
+	}
+	musb_ep->type = desc->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK;
+
+	/* check direction and (later) maxpacket size against endpoint */
+	if ((desc->bEndpointAddress & USB_ENDPOINT_NUMBER_MASK) != epnum)
+		goto fail;
+
+	/* REVISIT this rules out high bandwidth periodic transfers */
+	tmp = le16_to_cpu(desc->wMaxPacketSize);
+	if (tmp & ~0x07ff)
+		goto fail;
+	musb_ep->packet_sz = tmp;
+
+	/* enable the interrupts for the endpoint, set the endpoint
+	 * packet size (or fail), set the mode, clear the fifo
+	 */
+	musb_ep_select(mbase, epnum);
+	if (desc->bEndpointAddress & USB_DIR_IN) {
+		u16 int_txe = musb_readw(mbase, MUSB_INTRTXE);
+
+		if (hw_ep->is_shared_fifo)
+			musb_ep->is_in = 1;
+		if (!musb_ep->is_in)
+			goto fail;
+		if (tmp > hw_ep->max_packet_sz_tx)
+			goto fail;
+
+		int_txe |= (1 << epnum);
+		musb_writew(mbase, MUSB_INTRTXE, int_txe);
+
+		/* REVISIT if can_bulk_split(), use by updating "tmp";
+		 * likewise high bandwidth periodic tx
+		 */
+		musb_writew(regs, MUSB_TXMAXP, tmp);
+
+		csr = MUSB_TXCSR_MODE | MUSB_TXCSR_CLRDATATOG;
+		if (musb_readw(regs, MUSB_TXCSR)
+				& MUSB_TXCSR_FIFONOTEMPTY)
+			csr |= MUSB_TXCSR_FLUSHFIFO;
+		if (musb_ep->type == USB_ENDPOINT_XFER_ISOC)
+			csr |= MUSB_TXCSR_P_ISO;
+
+		/* set twice in case of double buffering */
+		musb_writew(regs, MUSB_TXCSR, csr);
+		/* REVISIT may be inappropriate w/o FIFONOTEMPTY ... */
+		musb_writew(regs, MUSB_TXCSR, csr);
+
+	} else {
+		u16 int_rxe = musb_readw(mbase, MUSB_INTRRXE);
+
+		if (hw_ep->is_shared_fifo)
+			musb_ep->is_in = 0;
+		if (musb_ep->is_in)
+			goto fail;
+		if (tmp > hw_ep->max_packet_sz_rx)
+			goto fail;
+
+		int_rxe |= (1 << epnum);
+		musb_writew(mbase, MUSB_INTRRXE, int_rxe);
+
+		/* REVISIT if can_bulk_combine() use by updating "tmp"
+		 * likewise high bandwidth periodic rx
+		 */
+		musb_writew(regs, MUSB_RXMAXP, tmp);
+
+		/* force shared fifo to OUT-only mode */
+		if (hw_ep->is_shared_fifo) {
+			csr = musb_readw(regs, MUSB_TXCSR);
+			csr &= ~(MUSB_TXCSR_MODE | MUSB_TXCSR_TXPKTRDY);
+			musb_writew(regs, MUSB_TXCSR, csr);
+		}
+
+		csr = MUSB_RXCSR_FLUSHFIFO | MUSB_RXCSR_CLRDATATOG;
+		if (musb_ep->type == USB_ENDPOINT_XFER_ISOC)
+			csr |= MUSB_RXCSR_P_ISO;
+		else if (musb_ep->type == USB_ENDPOINT_XFER_INT)
+			csr |= MUSB_RXCSR_DISNYET;
+
+		/* set twice in case of double buffering */
+		musb_writew(regs, MUSB_RXCSR, csr);
+		musb_writew(regs, MUSB_RXCSR, csr);
+	}
+
+	/* NOTE:  all the I/O code _should_ work fine without DMA, in case
+	 * for some reason you run out of channels here.
+	 */
+	if (is_dma_capable() && musb->dma_controller) {
+		struct dma_controller	*c = musb->dma_controller;
+
+		musb_ep->dma = c->channel_alloc(c, hw_ep,
+				(desc->bEndpointAddress & USB_DIR_IN));
+	} else
+		musb_ep->dma = NULL;
+
+	musb_ep->desc = desc;
+	musb_ep->busy = 0;
+	status = 0;
+
+	pr_debug("%s periph: enabled %s for %s %s, %smaxpacket %d\n",
+			musb_driver_name, musb_ep->end_point.name,
+			({ char *s; switch (musb_ep->type) {
+			case USB_ENDPOINT_XFER_BULK:	s = "bulk"; break;
+			case USB_ENDPOINT_XFER_INT:	s = "int"; break;
+			default:			s = "iso"; break;
+			}; s; }),
+			musb_ep->is_in ? "IN" : "OUT",
+			musb_ep->dma ? "dma, " : "",
+			musb_ep->packet_sz);
+
+	schedule_work(&musb->irq_work);
+
+fail:
+	spin_unlock_irqrestore(&musb->lock, flags);
+	return status;
+}
+
+/*
+ * Disable an endpoint flushing all requests queued.
+ */
+static int musb_gadget_disable(struct usb_ep *ep)
+{
+	unsigned long	flags;
+	struct musb	*musb;
+	u8		epnum;
+	struct musb_ep	*musb_ep;
+	void __iomem	*epio;
+	int		status = 0;
+
+	musb_ep = to_musb_ep(ep);
+	musb = musb_ep->musb;
+	epnum = musb_ep->current_epnum;
+	epio = musb->endpoints[epnum].regs;
+
+	spin_lock_irqsave(&musb->lock, flags);
+	musb_ep_select(musb->mregs, epnum);
+
+	/* zero the endpoint sizes */
+	if (musb_ep->is_in) {
+		u16 int_txe = musb_readw(musb->mregs, MUSB_INTRTXE);
+		int_txe &= ~(1 << epnum);
+		musb_writew(musb->mregs, MUSB_INTRTXE, int_txe);
+		musb_writew(epio, MUSB_TXMAXP, 0);
+	} else {
+		u16 int_rxe = musb_readw(musb->mregs, MUSB_INTRRXE);
+		int_rxe &= ~(1 << epnum);
+		musb_writew(musb->mregs, MUSB_INTRRXE, int_rxe);
+		musb_writew(epio, MUSB_RXMAXP, 0);
+	}
+
+	musb_ep->desc = NULL;
+
+	/* abort all pending DMA and requests */
+	nuke(musb_ep, -ESHUTDOWN);
+
+	schedule_work(&musb->irq_work);
+
+	spin_unlock_irqrestore(&(musb->lock), flags);
+
+	DBG(2, "%s\n", musb_ep->end_point.name);
+
+	return status;
+}
+
+/*
+ * Allocate a request for an endpoint.
+ * Reused by ep0 code.
+ */
+struct usb_request *musb_alloc_request(struct usb_ep *ep, gfp_t gfp_flags)
+{
+	struct musb_ep		*musb_ep = to_musb_ep(ep);
+	struct musb_request	*request = NULL;
+
+	request = kzalloc(sizeof *request, gfp_flags);
+	if (request) {
+		INIT_LIST_HEAD(&request->request.list);
+		request->request.dma = DMA_ADDR_INVALID;
+		request->epnum = musb_ep->current_epnum;
+		request->ep = musb_ep;
+	}
+
+	return &request->request;
+}
+
+/*
+ * Free a request
+ * Reused by ep0 code.
+ */
+void musb_free_request(struct usb_ep *ep, struct usb_request *req)
+{
+	kfree(to_musb_request(req));
+}
+
+static LIST_HEAD(buffers);
+
+struct free_record {
+	struct list_head	list;
+	struct device		*dev;
+	unsigned		bytes;
+	dma_addr_t		dma;
+};
+
+/*
+ * Context: controller locked, IRQs blocked.
+ */
+static void musb_ep_restart(struct musb *musb, struct musb_request *req)
+{
+	DBG(3, "<== %s request %p len %u on hw_ep%d\n",
+		req->tx ? "TX/IN" : "RX/OUT",
+		&req->request, req->request.length, req->epnum);
+
+	musb_ep_select(musb->mregs, req->epnum);
+	if (req->tx)
+		txstate(musb, req);
+	else
+		rxstate(musb, req);
+}
+
+static int musb_gadget_queue(struct usb_ep *ep, struct usb_request *req,
+			gfp_t gfp_flags)
+{
+	struct musb_ep		*musb_ep;
+	struct musb_request	*request;
+	struct musb		*musb;
+	int			status = 0;
+	unsigned long		lockflags;
+
+	if (!ep || !req)
+		return -EINVAL;
+	if (!req->buf)
+		return -ENODATA;
+
+	musb_ep = to_musb_ep(ep);
+	musb = musb_ep->musb;
+
+	request = to_musb_request(req);
+	request->musb = musb;
+
+	if (request->ep != musb_ep)
+		return -EINVAL;
+
+	DBG(4, "<== to %s request=%p\n", ep->name, req);
+
+	/* request is mine now... */
+	request->request.actual = 0;
+	request->request.status = -EINPROGRESS;
+	request->epnum = musb_ep->current_epnum;
+	request->tx = musb_ep->is_in;
+
+	if (is_dma_capable() && musb_ep->dma) {
+		if (request->request.dma == DMA_ADDR_INVALID) {
+			request->request.dma = dma_map_single(
+					musb->controller,
+					request->request.buf,
+					request->request.length,
+					request->tx
+						? DMA_TO_DEVICE
+						: DMA_FROM_DEVICE);
+			request->mapped = 1;
+		} else {
+			dma_sync_single_for_device(musb->controller,
+					request->request.dma,
+					request->request.length,
+					request->tx
+						? DMA_TO_DEVICE
+						: DMA_FROM_DEVICE);
+			request->mapped = 0;
+		}
+	} else if (!req->buf) {
+		return -ENODATA;
+	} else
+		request->mapped = 0;
+
+	spin_lock_irqsave(&musb->lock, lockflags);
+
+	/* don't queue if the ep is down */
+	if (!musb_ep->desc) {
+		DBG(4, "req %p queued to %s while ep %s\n",
+				req, ep->name, "disabled");
+		status = -ESHUTDOWN;
+		goto cleanup;
+	}
+
+	/* add request to the list */
+	list_add_tail(&(request->request.list), &(musb_ep->req_list));
+
+	/* it this is the head of the queue, start i/o ... */
+	if (!musb_ep->busy && &request->request.list == musb_ep->req_list.next)
+		musb_ep_restart(musb, request);
+
+cleanup:
+	spin_unlock_irqrestore(&musb->lock, lockflags);
+	return status;
+}
+
+static int musb_gadget_dequeue(struct usb_ep *ep, struct usb_request *request)
+{
+	struct musb_ep		*musb_ep = to_musb_ep(ep);
+	struct usb_request	*r;
+	unsigned long		flags;
+	int			status = 0;
+	struct musb		*musb = musb_ep->musb;
+
+	if (!ep || !request || to_musb_request(request)->ep != musb_ep)
+		return -EINVAL;
+
+	spin_lock_irqsave(&musb->lock, flags);
+
+	list_for_each_entry(r, &musb_ep->req_list, list) {
+		if (r == request)
+			break;
+	}
+	if (r != request) {
+		DBG(3, "request %p not queued to %s\n", request, ep->name);
+		status = -EINVAL;
+		goto done;
+	}
+
+	/* if the hardware doesn't have the request, easy ... */
+	if (musb_ep->req_list.next != &request->list || musb_ep->busy)
+		musb_g_giveback(musb_ep, request, -ECONNRESET);
+
+	/* ... else abort the dma transfer ... */
+	else if (is_dma_capable() && musb_ep->dma) {
+		struct dma_controller	*c = musb->dma_controller;
+
+		musb_ep_select(musb->mregs, musb_ep->current_epnum);
+		if (c->channel_abort)
+			status = c->channel_abort(musb_ep->dma);
+		else
+			status = -EBUSY;
+		if (status == 0)
+			musb_g_giveback(musb_ep, request, -ECONNRESET);
+	} else {
+		/* NOTE: by sticking to easily tested hardware/driver states,
+		 * we leave counting of in-flight packets imprecise.
+		 */
+		musb_g_giveback(musb_ep, request, -ECONNRESET);
+	}
+
+done:
+	spin_unlock_irqrestore(&musb->lock, flags);
+	return status;
+}
+
+/*
+ * Set or clear the halt bit of an endpoint. A halted enpoint won't tx/rx any
+ * data but will queue requests.
+ *
+ * exported to ep0 code
+ */
+int musb_gadget_set_halt(struct usb_ep *ep, int value)
+{
+	struct musb_ep		*musb_ep = to_musb_ep(ep);
+	u8			epnum = musb_ep->current_epnum;
+	struct musb		*musb = musb_ep->musb;
+	void __iomem		*epio = musb->endpoints[epnum].regs;
+	void __iomem		*mbase;
+	unsigned long		flags;
+	u16			csr;
+	struct musb_request	*request = NULL;
+	int			status = 0;
+
+	if (!ep)
+		return -EINVAL;
+	mbase = musb->mregs;
+
+	spin_lock_irqsave(&musb->lock, flags);
+
+	if ((USB_ENDPOINT_XFER_ISOC == musb_ep->type)) {
+		status = -EINVAL;
+		goto done;
+	}
+
+	musb_ep_select(mbase, epnum);
+
+	/* cannot portably stall with non-empty FIFO */
+	request = to_musb_request(next_request(musb_ep));
+	if (value && musb_ep->is_in) {
+		csr = musb_readw(epio, MUSB_TXCSR);
+		if (csr & MUSB_TXCSR_FIFONOTEMPTY) {
+			DBG(3, "%s fifo busy, cannot halt\n", ep->name);
+			spin_unlock_irqrestore(&musb->lock, flags);
+			return -EAGAIN;
+		}
+
+	}
+
+	/* set/clear the stall and toggle bits */
+	DBG(2, "%s: %s stall\n", ep->name, value ? "set" : "clear");
+	if (musb_ep->is_in) {
+		csr = musb_readw(epio, MUSB_TXCSR);
+		if (csr & MUSB_TXCSR_FIFONOTEMPTY)
+			csr |= MUSB_TXCSR_FLUSHFIFO;
+		csr |= MUSB_TXCSR_P_WZC_BITS
+			| MUSB_TXCSR_CLRDATATOG;
+		if (value)
+			csr |= MUSB_TXCSR_P_SENDSTALL;
+		else
+			csr &= ~(MUSB_TXCSR_P_SENDSTALL
+				| MUSB_TXCSR_P_SENTSTALL);
+		csr &= ~MUSB_TXCSR_TXPKTRDY;
+		musb_writew(epio, MUSB_TXCSR, csr);
+	} else {
+		csr = musb_readw(epio, MUSB_RXCSR);
+		csr |= MUSB_RXCSR_P_WZC_BITS
+			| MUSB_RXCSR_FLUSHFIFO
+			| MUSB_RXCSR_CLRDATATOG;
+		if (value)
+			csr |= MUSB_RXCSR_P_SENDSTALL;
+		else
+			csr &= ~(MUSB_RXCSR_P_SENDSTALL
+				| MUSB_RXCSR_P_SENTSTALL);
+		musb_writew(epio, MUSB_RXCSR, csr);
+	}
+
+done:
+
+	/* maybe start the first request in the queue */
+	if (!musb_ep->busy && !value && request) {
+		DBG(3, "restarting the request\n");
+		musb_ep_restart(musb, request);
+	}
+
+	spin_unlock_irqrestore(&musb->lock, flags);
+	return status;
+}
+
+static int musb_gadget_fifo_status(struct usb_ep *ep)
+{
+	struct musb_ep		*musb_ep = to_musb_ep(ep);
+	void __iomem		*epio = musb_ep->hw_ep->regs;
+	int			retval = -EINVAL;
+
+	if (musb_ep->desc && !musb_ep->is_in) {
+		struct musb		*musb = musb_ep->musb;
+		int			epnum = musb_ep->current_epnum;
+		void __iomem		*mbase = musb->mregs;
+		unsigned long		flags;
+
+		spin_lock_irqsave(&musb->lock, flags);
+
+		musb_ep_select(mbase, epnum);
+		/* FIXME return zero unless RXPKTRDY is set */
+		retval = musb_readw(epio, MUSB_RXCOUNT);
+
+		spin_unlock_irqrestore(&musb->lock, flags);
+	}
+	return retval;
+}
+
+static void musb_gadget_fifo_flush(struct usb_ep *ep)
+{
+	struct musb_ep	*musb_ep = to_musb_ep(ep);
+	struct musb	*musb = musb_ep->musb;
+	u8		epnum = musb_ep->current_epnum;
+	void __iomem	*epio = musb->endpoints[epnum].regs;
+	void __iomem	*mbase;
+	unsigned long	flags;
+	u16		csr, int_txe;
+
+	mbase = musb->mregs;
+
+	spin_lock_irqsave(&musb->lock, flags);
+	musb_ep_select(mbase, (u8) epnum);
+
+	/* disable interrupts */
+	int_txe = musb_readw(mbase, MUSB_INTRTXE);
+	musb_writew(mbase, MUSB_INTRTXE, int_txe & ~(1 << epnum));
+
+	if (musb_ep->is_in) {
+		csr = musb_readw(epio, MUSB_TXCSR);
+		if (csr & MUSB_TXCSR_FIFONOTEMPTY) {
+			csr |= MUSB_TXCSR_FLUSHFIFO | MUSB_TXCSR_P_WZC_BITS;
+			musb_writew(epio, MUSB_TXCSR, csr);
+			/* REVISIT may be inappropriate w/o FIFONOTEMPTY ... */
+			musb_writew(epio, MUSB_TXCSR, csr);
+		}
+	} else {
+		csr = musb_readw(epio, MUSB_RXCSR);
+		csr |= MUSB_RXCSR_FLUSHFIFO | MUSB_RXCSR_P_WZC_BITS;
+		musb_writew(epio, MUSB_RXCSR, csr);
+		musb_writew(epio, MUSB_RXCSR, csr);
+	}
+
+	/* re-enable interrupt */
+	musb_writew(mbase, MUSB_INTRTXE, int_txe);
+	spin_unlock_irqrestore(&musb->lock, flags);
+}
+
+static const struct usb_ep_ops musb_ep_ops = {
+	.enable		= musb_gadget_enable,
+	.disable	= musb_gadget_disable,
+	.alloc_request	= musb_alloc_request,
+	.free_request	= musb_free_request,
+	.queue		= musb_gadget_queue,
+	.dequeue	= musb_gadget_dequeue,
+	.set_halt	= musb_gadget_set_halt,
+	.fifo_status	= musb_gadget_fifo_status,
+	.fifo_flush	= musb_gadget_fifo_flush
+};
+
+/* ----------------------------------------------------------------------- */
+
+static int musb_gadget_get_frame(struct usb_gadget *gadget)
+{
+	struct musb	*musb = gadget_to_musb(gadget);
+
+	return (int)musb_readw(musb->mregs, MUSB_FRAME);
+}
+
+static int musb_gadget_wakeup(struct usb_gadget *gadget)
+{
+	struct musb	*musb = gadget_to_musb(gadget);
+	void __iomem	*mregs = musb->mregs;
+	unsigned long	flags;
+	int		status = -EINVAL;
+	u8		power, devctl;
+	int		retries;
+
+	spin_lock_irqsave(&musb->lock, flags);
+
+	switch (musb->xceiv.state) {
+	case OTG_STATE_B_PERIPHERAL:
+		/* NOTE:  OTG state machine doesn't include B_SUSPENDED;
+		 * that's part of the standard usb 1.1 state machine, and
+		 * doesn't affect OTG transitions.
+		 */
+		if (musb->may_wakeup && musb->is_suspended)
+			break;
+		goto done;
+	case OTG_STATE_B_IDLE:
+		/* Start SRP ... OTG not required. */
+		devctl = musb_readb(mregs, MUSB_DEVCTL);
+		DBG(2, "Sending SRP: devctl: %02x\n", devctl);
+		devctl |= MUSB_DEVCTL_SESSION;
+		musb_writeb(mregs, MUSB_DEVCTL, devctl);
+		devctl = musb_readb(mregs, MUSB_DEVCTL);
+		retries = 100;
+		while (!(devctl & MUSB_DEVCTL_SESSION)) {
+			devctl = musb_readb(mregs, MUSB_DEVCTL);
+			if (retries-- < 1)
+				break;
+		}
+		retries = 10000;
+		while (devctl & MUSB_DEVCTL_SESSION) {
+			devctl = musb_readb(mregs, MUSB_DEVCTL);
+			if (retries-- < 1)
+				break;
+		}
+
+		/* Block idling for at least 1s */
+		musb_platform_try_idle(musb,
+			jiffies + msecs_to_jiffies(1 * HZ));
+
+		status = 0;
+		goto done;
+	default:
+		DBG(2, "Unhandled wake: %s\n", otg_state_string(musb));
+		goto done;
+	}
+
+	status = 0;
+
+	power = musb_readb(mregs, MUSB_POWER);
+	power |= MUSB_POWER_RESUME;
+	musb_writeb(mregs, MUSB_POWER, power);
+	DBG(2, "issue wakeup\n");
+
+	/* FIXME do this next chunk in a timer callback, no udelay */
+	mdelay(2);
+
+	power = musb_readb(mregs, MUSB_POWER);
+	power &= ~MUSB_POWER_RESUME;
+	musb_writeb(mregs, MUSB_POWER, power);
+done:
+	spin_unlock_irqrestore(&musb->lock, flags);
+	return status;
+}
+
+static int
+musb_gadget_set_self_powered(struct usb_gadget *gadget, int is_selfpowered)
+{
+	struct musb	*musb = gadget_to_musb(gadget);
+
+	musb->is_self_powered = !!is_selfpowered;
+	return 0;
+}
+
+static void musb_pullup(struct musb *musb, int is_on)
+{
+	u8 power;
+
+	power = musb_readb(musb->mregs, MUSB_POWER);
+	if (is_on)
+		power |= MUSB_POWER_SOFTCONN;
+	else
+		power &= ~MUSB_POWER_SOFTCONN;
+
+	/* FIXME if on, HdrcStart; if off, HdrcStop */
+
+	DBG(3, "gadget %s D+ pullup %s\n",
+		musb->gadget_driver->function, is_on ? "on" : "off");
+	musb_writeb(musb->mregs, MUSB_POWER, power);
+}
+
+#if 0
+static int musb_gadget_vbus_session(struct usb_gadget *gadget, int is_active)
+{
+	DBG(2, "<= %s =>\n", __func__);
+
+	/*
+	 * FIXME iff driver's softconnect flag is set (as it is during probe,
+	 * though that can clear it), just musb_pullup().
+	 */
+
+	return -EINVAL;
+}
+#endif
+
+static int musb_gadget_vbus_draw(struct usb_gadget *gadget, unsigned mA)
+{
+	struct musb	*musb = gadget_to_musb(gadget);
+
+	if (!musb->xceiv.set_power)
+		return -EOPNOTSUPP;
+	return otg_set_power(&musb->xceiv, mA);
+}
+
+static int musb_gadget_pullup(struct usb_gadget *gadget, int is_on)
+{
+	struct musb	*musb = gadget_to_musb(gadget);
+	unsigned long	flags;
+
+	is_on = !!is_on;
+
+	/* NOTE: this assumes we are sensing vbus; we'd rather
+	 * not pullup unless the B-session is active.
+	 */
+	spin_lock_irqsave(&musb->lock, flags);
+	if (is_on != musb->softconnect) {
+		musb->softconnect = is_on;
+		musb_pullup(musb, is_on);
+	}
+	spin_unlock_irqrestore(&musb->lock, flags);
+	return 0;
+}
+
+static const struct usb_gadget_ops musb_gadget_operations = {
+	.get_frame		= musb_gadget_get_frame,
+	.wakeup			= musb_gadget_wakeup,
+	.set_selfpowered	= musb_gadget_set_self_powered,
+	/* .vbus_session		= musb_gadget_vbus_session, */
+	.vbus_draw		= musb_gadget_vbus_draw,
+	.pullup			= musb_gadget_pullup,
+};
+
+/* ----------------------------------------------------------------------- */
+
+/* Registration */
+
+/* Only this registration code "knows" the rule (from USB standards)
+ * about there being only one external upstream port.  It assumes
+ * all peripheral ports are external...
+ */
+static struct musb *the_gadget;
+
+static void musb_gadget_release(struct device *dev)
+{
+	/* kref_put(WHAT) */
+	dev_dbg(dev, "%s\n", __func__);
+}
+
+
+static void __init
+init_peripheral_ep(struct musb *musb, struct musb_ep *ep, u8 epnum, int is_in)
+{
+	struct musb_hw_ep	*hw_ep = musb->endpoints + epnum;
+
+	memset(ep, 0, sizeof *ep);
+
+	ep->current_epnum = epnum;
+	ep->musb = musb;
+	ep->hw_ep = hw_ep;
+	ep->is_in = is_in;
+
+	INIT_LIST_HEAD(&ep->req_list);
+
+	sprintf(ep->name, "ep%d%s", epnum,
+			(!epnum || hw_ep->is_shared_fifo) ? "" : (
+				is_in ? "in" : "out"));
+	ep->end_point.name = ep->name;
+	INIT_LIST_HEAD(&ep->end_point.ep_list);
+	if (!epnum) {
+		ep->end_point.maxpacket = 64;
+		ep->end_point.ops = &musb_g_ep0_ops;
+		musb->g.ep0 = &ep->end_point;
+	} else {
+		if (is_in)
+			ep->end_point.maxpacket = hw_ep->max_packet_sz_tx;
+		else
+			ep->end_point.maxpacket = hw_ep->max_packet_sz_rx;
+		ep->end_point.ops = &musb_ep_ops;
+		list_add_tail(&ep->end_point.ep_list, &musb->g.ep_list);
+	}
+}
+
+/*
+ * Initialize the endpoints exposed to peripheral drivers, with backlinks
+ * to the rest of the driver state.
+ */
+static inline void __init musb_g_init_endpoints(struct musb *musb)
+{
+	u8			epnum;
+	struct musb_hw_ep	*hw_ep;
+	unsigned		count = 0;
+
+	/* intialize endpoint list just once */
+	INIT_LIST_HEAD(&(musb->g.ep_list));
+
+	for (epnum = 0, hw_ep = musb->endpoints;
+			epnum < musb->nr_endpoints;
+			epnum++, hw_ep++) {
+		if (hw_ep->is_shared_fifo /* || !epnum */) {
+			init_peripheral_ep(musb, &hw_ep->ep_in, epnum, 0);
+			count++;
+		} else {
+			if (hw_ep->max_packet_sz_tx) {
+				init_peripheral_ep(musb, &hw_ep->ep_in,
+							epnum, 1);
+				count++;
+			}
+			if (hw_ep->max_packet_sz_rx) {
+				init_peripheral_ep(musb, &hw_ep->ep_out,
+							epnum, 0);
+				count++;
+			}
+		}
+	}
+}
+
+/* called once during driver setup to initialize and link into
+ * the driver model; memory is zeroed.
+ */
+int __init musb_gadget_setup(struct musb *musb)
+{
+	int status;
+
+	/* REVISIT minor race:  if (erroneously) setting up two
+	 * musb peripherals at the same time, only the bus lock
+	 * is probably held.
+	 */
+	if (the_gadget)
+		return -EBUSY;
+	the_gadget = musb;
+
+	musb->g.ops = &musb_gadget_operations;
+	musb->g.is_dualspeed = 1;
+	musb->g.speed = USB_SPEED_UNKNOWN;
+
+	/* this "gadget" abstracts/virtualizes the controller */
+	strcpy(musb->g.dev.bus_id, "gadget");
+	musb->g.dev.parent = musb->controller;
+	musb->g.dev.dma_mask = musb->controller->dma_mask;
+	musb->g.dev.release = musb_gadget_release;
+	musb->g.name = musb_driver_name;
+
+	if (is_otg_enabled(musb))
+		musb->g.is_otg = 1;
+
+	musb_g_init_endpoints(musb);
+
+	musb->is_active = 0;
+	musb_platform_try_idle(musb, 0);
+
+	status = device_register(&musb->g.dev);
+	if (status != 0)
+		the_gadget = NULL;
+	return status;
+}
+
+void musb_gadget_cleanup(struct musb *musb)
+{
+	if (musb != the_gadget)
+		return;
+
+	device_unregister(&musb->g.dev);
+	the_gadget = NULL;
+}
+
+/*
+ * Register the gadget driver. Used by gadget drivers when
+ * registering themselves with the controller.
+ *
+ * -EINVAL something went wrong (not driver)
+ * -EBUSY another gadget is already using the controller
+ * -ENOMEM no memeory to perform the operation
+ *
+ * @param driver the gadget driver
+ * @return <0 if error, 0 if everything is fine
+ */
+int usb_gadget_register_driver(struct usb_gadget_driver *driver)
+{
+	int retval;
+	unsigned long flags;
+	struct musb *musb = the_gadget;
+
+	if (!driver
+			|| driver->speed != USB_SPEED_HIGH
+			|| !driver->bind
+			|| !driver->setup)
+		return -EINVAL;
+
+	/* driver must be initialized to support peripheral mode */
+	if (!musb || !(musb->board_mode == MUSB_OTG
+				|| musb->board_mode != MUSB_OTG)) {
+		DBG(1, "%s, no dev??\n", __func__);
+		return -ENODEV;
+	}
+
+	DBG(3, "registering driver %s\n", driver->function);
+	spin_lock_irqsave(&musb->lock, flags);
+
+	if (musb->gadget_driver) {
+		DBG(1, "%s is already bound to %s\n",
+				musb_driver_name,
+				musb->gadget_driver->driver.name);
+		retval = -EBUSY;
+	} else {
+		musb->gadget_driver = driver;
+		musb->g.dev.driver = &driver->driver;
+		driver->driver.bus = NULL;
+		musb->softconnect = 1;
+		retval = 0;
+	}
+
+	spin_unlock_irqrestore(&musb->lock, flags);
+
+	if (retval == 0) {
+		retval = driver->bind(&musb->g);
+		if (retval != 0) {
+			DBG(3, "bind to driver %s failed --> %d\n",
+					driver->driver.name, retval);
+			musb->gadget_driver = NULL;
+			musb->g.dev.driver = NULL;
+		}
+
+		spin_lock_irqsave(&musb->lock, flags);
+
+		/* REVISIT always use otg_set_peripheral(), handling
+		 * issues including the root hub one below ...
+		 */
+		musb->xceiv.gadget = &musb->g;
+		musb->xceiv.state = OTG_STATE_B_IDLE;
+		musb->is_active = 1;
+
+		/* FIXME this ignores the softconnect flag.  Drivers are
+		 * allowed hold the peripheral inactive until for example
+		 * userspace hooks up printer hardware or DSP codecs, so
+		 * hosts only see fully functional devices.
+		 */
+
+		if (!is_otg_enabled(musb))
+			musb_start(musb);
+
+		spin_unlock_irqrestore(&musb->lock, flags);
+
+		if (is_otg_enabled(musb)) {
+			DBG(3, "OTG startup...\n");
+
+			/* REVISIT:  funcall to other code, which also
+			 * handles power budgeting ... this way also
+			 * ensures HdrcStart is indirectly called.
+			 */
+			retval = usb_add_hcd(musb_to_hcd(musb), -1, 0);
+			if (retval < 0) {
+				DBG(1, "add_hcd failed, %d\n", retval);
+				spin_lock_irqsave(&musb->lock, flags);
+				musb->xceiv.gadget = NULL;
+				musb->xceiv.state = OTG_STATE_UNDEFINED;
+				musb->gadget_driver = NULL;
+				musb->g.dev.driver = NULL;
+				spin_unlock_irqrestore(&musb->lock, flags);
+			}
+		}
+	}
+
+	return retval;
+}
+EXPORT_SYMBOL(usb_gadget_register_driver);
+
+static void stop_activity(struct musb *musb, struct usb_gadget_driver *driver)
+{
+	int			i;
+	struct musb_hw_ep	*hw_ep;
+
+	/* don't disconnect if it's not connected */
+	if (musb->g.speed == USB_SPEED_UNKNOWN)
+		driver = NULL;
+	else
+		musb->g.speed = USB_SPEED_UNKNOWN;
+
+	/* deactivate the hardware */
+	if (musb->softconnect) {
+		musb->softconnect = 0;
+		musb_pullup(musb, 0);
+	}
+	musb_stop(musb);
+
+	/* killing any outstanding requests will quiesce the driver;
+	 * then report disconnect
+	 */
+	if (driver) {
+		for (i = 0, hw_ep = musb->endpoints;
+				i < musb->nr_endpoints;
+				i++, hw_ep++) {
+			musb_ep_select(musb->mregs, i);
+			if (hw_ep->is_shared_fifo /* || !epnum */) {
+				nuke(&hw_ep->ep_in, -ESHUTDOWN);
+			} else {
+				if (hw_ep->max_packet_sz_tx)
+					nuke(&hw_ep->ep_in, -ESHUTDOWN);
+				if (hw_ep->max_packet_sz_rx)
+					nuke(&hw_ep->ep_out, -ESHUTDOWN);
+			}
+		}
+
+		spin_unlock(&musb->lock);
+		driver->disconnect(&musb->g);
+		spin_lock(&musb->lock);
+	}
+}
+
+/*
+ * Unregister the gadget driver. Used by gadget drivers when
+ * unregistering themselves from the controller.
+ *
+ * @param driver the gadget driver to unregister
+ */
+int usb_gadget_unregister_driver(struct usb_gadget_driver *driver)
+{
+	unsigned long	flags;
+	int		retval = 0;
+	struct musb	*musb = the_gadget;
+
+	if (!driver || !driver->unbind || !musb)
+		return -EINVAL;
+
+	/* REVISIT always use otg_set_peripheral() here too;
+	 * this needs to shut down the OTG engine.
+	 */
+
+	spin_lock_irqsave(&musb->lock, flags);
+
+#ifdef	CONFIG_USB_MUSB_OTG
+	musb_hnp_stop(musb);
+#endif
+
+	if (musb->gadget_driver == driver) {
+
+		(void) musb_gadget_vbus_draw(&musb->g, 0);
+
+		musb->xceiv.state = OTG_STATE_UNDEFINED;
+		stop_activity(musb, driver);
+
+		DBG(3, "unregistering driver %s\n", driver->function);
+		spin_unlock_irqrestore(&musb->lock, flags);
+		driver->unbind(&musb->g);
+		spin_lock_irqsave(&musb->lock, flags);
+
+		musb->gadget_driver = NULL;
+		musb->g.dev.driver = NULL;
+
+		musb->is_active = 0;
+		musb_platform_try_idle(musb, 0);
+	} else
+		retval = -EINVAL;
+	spin_unlock_irqrestore(&musb->lock, flags);
+
+	if (is_otg_enabled(musb) && retval == 0) {
+		usb_remove_hcd(musb_to_hcd(musb));
+		/* FIXME we need to be able to register another
+		 * gadget driver here and have everything work;
+		 * that currently misbehaves.
+		 */
+	}
+
+	return retval;
+}
+EXPORT_SYMBOL(usb_gadget_unregister_driver);
+
+
+/* ----------------------------------------------------------------------- */
+
+/* lifecycle operations called through plat_uds.c */
+
+void musb_g_resume(struct musb *musb)
+{
+	musb->is_suspended = 0;
+	switch (musb->xceiv.state) {
+	case OTG_STATE_B_IDLE:
+		break;
+	case OTG_STATE_B_WAIT_ACON:
+	case OTG_STATE_B_PERIPHERAL:
+		musb->is_active = 1;
+		if (musb->gadget_driver && musb->gadget_driver->resume) {
+			spin_unlock(&musb->lock);
+			musb->gadget_driver->resume(&musb->g);
+			spin_lock(&musb->lock);
+		}
+		break;
+	default:
+		WARNING("unhandled RESUME transition (%s)\n",
+				otg_state_string(musb));
+	}
+}
+
+/* called when SOF packets stop for 3+ msec */
+void musb_g_suspend(struct musb *musb)
+{
+	u8	devctl;
+
+	devctl = musb_readb(musb->mregs, MUSB_DEVCTL);
+	DBG(3, "devctl %02x\n", devctl);
+
+	switch (musb->xceiv.state) {
+	case OTG_STATE_B_IDLE:
+		if ((devctl & MUSB_DEVCTL_VBUS) == MUSB_DEVCTL_VBUS)
+			musb->xceiv.state = OTG_STATE_B_PERIPHERAL;
+		break;
+	case OTG_STATE_B_PERIPHERAL:
+		musb->is_suspended = 1;
+		if (musb->gadget_driver && musb->gadget_driver->suspend) {
+			spin_unlock(&musb->lock);
+			musb->gadget_driver->suspend(&musb->g);
+			spin_lock(&musb->lock);
+		}
+		break;
+	default:
+		/* REVISIT if B_HOST, clear DEVCTL.HOSTREQ;
+		 * A_PERIPHERAL may need care too
+		 */
+		WARNING("unhandled SUSPEND transition (%s)\n",
+				otg_state_string(musb));
+	}
+}
+
+/* Called during SRP */
+void musb_g_wakeup(struct musb *musb)
+{
+	musb_gadget_wakeup(&musb->g);
+}
+
+/* called when VBUS drops below session threshold, and in other cases */
+void musb_g_disconnect(struct musb *musb)
+{
+	void __iomem	*mregs = musb->mregs;
+	u8	devctl = musb_readb(mregs, MUSB_DEVCTL);
+
+	DBG(3, "devctl %02x\n", devctl);
+
+	/* clear HR */
+	musb_writeb(mregs, MUSB_DEVCTL, devctl & MUSB_DEVCTL_SESSION);
+
+	/* don't draw vbus until new b-default session */
+	(void) musb_gadget_vbus_draw(&musb->g, 0);
+
+	musb->g.speed = USB_SPEED_UNKNOWN;
+	if (musb->gadget_driver && musb->gadget_driver->disconnect) {
+		spin_unlock(&musb->lock);
+		musb->gadget_driver->disconnect(&musb->g);
+		spin_lock(&musb->lock);
+	}
+
+	switch (musb->xceiv.state) {
+	default:
+#ifdef	CONFIG_USB_MUSB_OTG
+		DBG(2, "Unhandled disconnect %s, setting a_idle\n",
+			otg_state_string(musb));
+		musb->xceiv.state = OTG_STATE_A_IDLE;
+		break;
+	case OTG_STATE_A_PERIPHERAL:
+		musb->xceiv.state = OTG_STATE_A_WAIT_VFALL;
+		break;
+	case OTG_STATE_B_WAIT_ACON:
+	case OTG_STATE_B_HOST:
+#endif
+	case OTG_STATE_B_PERIPHERAL:
+	case OTG_STATE_B_IDLE:
+		musb->xceiv.state = OTG_STATE_B_IDLE;
+		break;
+	case OTG_STATE_B_SRP_INIT:
+		break;
+	}
+
+	musb->is_active = 0;
+}
+
+void musb_g_reset(struct musb *musb)
+__releases(musb->lock)
+__acquires(musb->lock)
+{
+	void __iomem	*mbase = musb->mregs;
+	u8		devctl = musb_readb(mbase, MUSB_DEVCTL);
+	u8		power;
+
+	DBG(3, "<== %s addr=%x driver '%s'\n",
+			(devctl & MUSB_DEVCTL_BDEVICE)
+				? "B-Device" : "A-Device",
+			musb_readb(mbase, MUSB_FADDR),
+			musb->gadget_driver
+				? musb->gadget_driver->driver.name
+				: NULL
+			);
+
+	/* report disconnect, if we didn't already (flushing EP state) */
+	if (musb->g.speed != USB_SPEED_UNKNOWN)
+		musb_g_disconnect(musb);
+
+	/* clear HR */
+	else if (devctl & MUSB_DEVCTL_HR)
+		musb_writeb(mbase, MUSB_DEVCTL, MUSB_DEVCTL_SESSION);
+
+
+	/* what speed did we negotiate? */
+	power = musb_readb(mbase, MUSB_POWER);
+	musb->g.speed = (power & MUSB_POWER_HSMODE)
+			? USB_SPEED_HIGH : USB_SPEED_FULL;
+
+	/* start in USB_STATE_DEFAULT */
+	musb->is_active = 1;
+	musb->is_suspended = 0;
+	MUSB_DEV_MODE(musb);
+	musb->address = 0;
+	musb->ep0_state = MUSB_EP0_STAGE_SETUP;
+
+	musb->may_wakeup = 0;
+	musb->g.b_hnp_enable = 0;
+	musb->g.a_alt_hnp_support = 0;
+	musb->g.a_hnp_support = 0;
+
+	/* Normal reset, as B-Device;
+	 * or else after HNP, as A-Device
+	 */
+	if (devctl & MUSB_DEVCTL_BDEVICE) {
+		musb->xceiv.state = OTG_STATE_B_PERIPHERAL;
+		musb->g.is_a_peripheral = 0;
+	} else if (is_otg_enabled(musb)) {
+		musb->xceiv.state = OTG_STATE_A_PERIPHERAL;
+		musb->g.is_a_peripheral = 1;
+	} else
+		WARN_ON(1);
+
+	/* start with default limits on VBUS power draw */
+	(void) musb_gadget_vbus_draw(&musb->g,
+			is_otg_enabled(musb) ? 8 : 100);
+}
diff --git a/drivers/usb/musb/musb_gadget.h b/drivers/usb/musb/musb_gadget.h
new file mode 100644
index 000000000000..59502da9f739
--- /dev/null
+++ b/drivers/usb/musb/musb_gadget.h
@@ -0,0 +1,108 @@
+/*
+ * MUSB OTG driver peripheral defines
+ *
+ * Copyright 2005 Mentor Graphics Corporation
+ * Copyright (C) 2005-2006 by Texas Instruments
+ * Copyright (C) 2006-2007 Nokia Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ * THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
+ * NO EVENT SHALL THE AUTHORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ */
+
+#ifndef __MUSB_GADGET_H
+#define __MUSB_GADGET_H
+
+struct musb_request {
+	struct usb_request	request;
+	struct musb_ep		*ep;
+	struct musb		*musb;
+	u8 tx;			/* endpoint direction */
+	u8 epnum;
+	u8 mapped;
+};
+
+static inline struct musb_request *to_musb_request(struct usb_request *req)
+{
+	return req ? container_of(req, struct musb_request, request) : NULL;
+}
+
+extern struct usb_request *
+musb_alloc_request(struct usb_ep *ep, gfp_t gfp_flags);
+extern void musb_free_request(struct usb_ep *ep, struct usb_request *req);
+
+
+/*
+ * struct musb_ep - peripheral side view of endpoint rx or tx side
+ */
+struct musb_ep {
+	/* stuff towards the head is basically write-once. */
+	struct usb_ep			end_point;
+	char				name[12];
+	struct musb_hw_ep		*hw_ep;
+	struct musb			*musb;
+	u8				current_epnum;
+
+	/* ... when enabled/disabled ... */
+	u8				type;
+	u8				is_in;
+	u16				packet_sz;
+	const struct usb_endpoint_descriptor	*desc;
+	struct dma_channel		*dma;
+
+	/* later things are modified based on usage */
+	struct list_head		req_list;
+
+	/* true if lock must be dropped but req_list may not be advanced */
+	u8				busy;
+};
+
+static inline struct musb_ep *to_musb_ep(struct usb_ep *ep)
+{
+	return ep ? container_of(ep, struct musb_ep, end_point) : NULL;
+}
+
+static inline struct usb_request *next_request(struct musb_ep *ep)
+{
+	struct list_head	*queue = &ep->req_list;
+
+	if (list_empty(queue))
+		return NULL;
+	return container_of(queue->next, struct usb_request, list);
+}
+
+extern void musb_g_tx(struct musb *musb, u8 epnum);
+extern void musb_g_rx(struct musb *musb, u8 epnum);
+
+extern const struct usb_ep_ops musb_g_ep0_ops;
+
+extern int musb_gadget_setup(struct musb *);
+extern void musb_gadget_cleanup(struct musb *);
+
+extern void musb_g_giveback(struct musb_ep *, struct usb_request *, int);
+
+extern int musb_gadget_set_halt(struct usb_ep *ep, int value);
+
+#endif		/* __MUSB_GADGET_H */
diff --git a/drivers/usb/musb/musb_gadget_ep0.c b/drivers/usb/musb/musb_gadget_ep0.c
new file mode 100644
index 000000000000..a57652fff39c
--- /dev/null
+++ b/drivers/usb/musb/musb_gadget_ep0.c
@@ -0,0 +1,983 @@
+/*
+ * MUSB OTG peripheral driver ep0 handling
+ *
+ * Copyright 2005 Mentor Graphics Corporation
+ * Copyright (C) 2005-2006 by Texas Instruments
+ * Copyright (C) 2006-2007 Nokia Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ * THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
+ * NO EVENT SHALL THE AUTHORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/list.h>
+#include <linux/timer.h>
+#include <linux/spinlock.h>
+#include <linux/init.h>
+#include <linux/device.h>
+#include <linux/interrupt.h>
+
+#include "musb_core.h"
+
+/* ep0 is always musb->endpoints[0].ep_in */
+#define	next_ep0_request(musb)	next_in_request(&(musb)->endpoints[0])
+
+/*
+ * locking note:  we use only the controller lock, for simpler correctness.
+ * It's always held with IRQs blocked.
+ *
+ * It protects the ep0 request queue as well as ep0_state, not just the
+ * controller and indexed registers.  And that lock stays held unless it
+ * needs to be dropped to allow reentering this driver ... like upcalls to
+ * the gadget driver, or adjusting endpoint halt status.
+ */
+
+static char *decode_ep0stage(u8 stage)
+{
+	switch (stage) {
+	case MUSB_EP0_STAGE_SETUP:	return "idle";
+	case MUSB_EP0_STAGE_TX:		return "in";
+	case MUSB_EP0_STAGE_RX:		return "out";
+	case MUSB_EP0_STAGE_ACKWAIT:	return "wait";
+	case MUSB_EP0_STAGE_STATUSIN:	return "in/status";
+	case MUSB_EP0_STAGE_STATUSOUT:	return "out/status";
+	default:			return "?";
+	}
+}
+
+/* handle a standard GET_STATUS request
+ * Context:  caller holds controller lock
+ */
+static int service_tx_status_request(
+	struct musb *musb,
+	const struct usb_ctrlrequest *ctrlrequest)
+{
+	void __iomem	*mbase = musb->mregs;
+	int handled = 1;
+	u8 result[2], epnum = 0;
+	const u8 recip = ctrlrequest->bRequestType & USB_RECIP_MASK;
+
+	result[1] = 0;
+
+	switch (recip) {
+	case USB_RECIP_DEVICE:
+		result[0] = musb->is_self_powered << USB_DEVICE_SELF_POWERED;
+		result[0] |= musb->may_wakeup << USB_DEVICE_REMOTE_WAKEUP;
+#ifdef CONFIG_USB_MUSB_OTG
+		if (musb->g.is_otg) {
+			result[0] |= musb->g.b_hnp_enable
+				<< USB_DEVICE_B_HNP_ENABLE;
+			result[0] |= musb->g.a_alt_hnp_support
+				<< USB_DEVICE_A_ALT_HNP_SUPPORT;
+			result[0] |= musb->g.a_hnp_support
+				<< USB_DEVICE_A_HNP_SUPPORT;
+		}
+#endif
+		break;
+
+	case USB_RECIP_INTERFACE:
+		result[0] = 0;
+		break;
+
+	case USB_RECIP_ENDPOINT: {
+		int		is_in;
+		struct musb_ep	*ep;
+		u16		tmp;
+		void __iomem	*regs;
+
+		epnum = (u8) ctrlrequest->wIndex;
+		if (!epnum) {
+			result[0] = 0;
+			break;
+		}
+
+		is_in = epnum & USB_DIR_IN;
+		if (is_in) {
+			epnum &= 0x0f;
+			ep = &musb->endpoints[epnum].ep_in;
+		} else {
+			ep = &musb->endpoints[epnum].ep_out;
+		}
+		regs = musb->endpoints[epnum].regs;
+
+		if (epnum >= MUSB_C_NUM_EPS || !ep->desc) {
+			handled = -EINVAL;
+			break;
+		}
+
+		musb_ep_select(mbase, epnum);
+		if (is_in)
+			tmp = musb_readw(regs, MUSB_TXCSR)
+						& MUSB_TXCSR_P_SENDSTALL;
+		else
+			tmp = musb_readw(regs, MUSB_RXCSR)
+						& MUSB_RXCSR_P_SENDSTALL;
+		musb_ep_select(mbase, 0);
+
+		result[0] = tmp ? 1 : 0;
+		} break;
+
+	default:
+		/* class, vendor, etc ... delegate */
+		handled = 0;
+		break;
+	}
+
+	/* fill up the fifo; caller updates csr0 */
+	if (handled > 0) {
+		u16	len = le16_to_cpu(ctrlrequest->wLength);
+
+		if (len > 2)
+			len = 2;
+		musb_write_fifo(&musb->endpoints[0], len, result);
+	}
+
+	return handled;
+}
+
+/*
+ * handle a control-IN request, the end0 buffer contains the current request
+ * that is supposed to be a standard control request. Assumes the fifo to
+ * be at least 2 bytes long.
+ *
+ * @return 0 if the request was NOT HANDLED,
+ * < 0 when error
+ * > 0 when the request is processed
+ *
+ * Context:  caller holds controller lock
+ */
+static int
+service_in_request(struct musb *musb, const struct usb_ctrlrequest *ctrlrequest)
+{
+	int handled = 0;	/* not handled */
+
+	if ((ctrlrequest->bRequestType & USB_TYPE_MASK)
+			== USB_TYPE_STANDARD) {
+		switch (ctrlrequest->bRequest) {
+		case USB_REQ_GET_STATUS:
+			handled = service_tx_status_request(musb,
+					ctrlrequest);
+			break;
+
+		/* case USB_REQ_SYNC_FRAME: */
+
+		default:
+			break;
+		}
+	}
+	return handled;
+}
+
+/*
+ * Context:  caller holds controller lock
+ */
+static void musb_g_ep0_giveback(struct musb *musb, struct usb_request *req)
+{
+	musb_g_giveback(&musb->endpoints[0].ep_in, req, 0);
+	musb->ep0_state = MUSB_EP0_STAGE_SETUP;
+}
+
+/*
+ * Tries to start B-device HNP negotiation if enabled via sysfs
+ */
+static inline void musb_try_b_hnp_enable(struct musb *musb)
+{
+	void __iomem	*mbase = musb->mregs;
+	u8		devctl;
+
+	DBG(1, "HNP: Setting HR\n");
+	devctl = musb_readb(mbase, MUSB_DEVCTL);
+	musb_writeb(mbase, MUSB_DEVCTL, devctl | MUSB_DEVCTL_HR);
+}
+
+/*
+ * Handle all control requests with no DATA stage, including standard
+ * requests such as:
+ * USB_REQ_SET_CONFIGURATION, USB_REQ_SET_INTERFACE, unrecognized
+ *	always delegated to the gadget driver
+ * USB_REQ_SET_ADDRESS, USB_REQ_CLEAR_FEATURE, USB_REQ_SET_FEATURE
+ *	always handled here, except for class/vendor/... features
+ *
+ * Context:  caller holds controller lock
+ */
+static int
+service_zero_data_request(struct musb *musb,
+		struct usb_ctrlrequest *ctrlrequest)
+__releases(musb->lock)
+__acquires(musb->lock)
+{
+	int handled = -EINVAL;
+	void __iomem *mbase = musb->mregs;
+	const u8 recip = ctrlrequest->bRequestType & USB_RECIP_MASK;
+
+	/* the gadget driver handles everything except what we MUST handle */
+	if ((ctrlrequest->bRequestType & USB_TYPE_MASK)
+			== USB_TYPE_STANDARD) {
+		switch (ctrlrequest->bRequest) {
+		case USB_REQ_SET_ADDRESS:
+			/* change it after the status stage */
+			musb->set_address = true;
+			musb->address = (u8) (ctrlrequest->wValue & 0x7f);
+			handled = 1;
+			break;
+
+		case USB_REQ_CLEAR_FEATURE:
+			switch (recip) {
+			case USB_RECIP_DEVICE:
+				if (ctrlrequest->wValue
+						!= USB_DEVICE_REMOTE_WAKEUP)
+					break;
+				musb->may_wakeup = 0;
+				handled = 1;
+				break;
+			case USB_RECIP_INTERFACE:
+				break;
+			case USB_RECIP_ENDPOINT:{
+				const u8 num = ctrlrequest->wIndex & 0x0f;
+				struct musb_ep *musb_ep;
+
+				if (num == 0
+						|| num >= MUSB_C_NUM_EPS
+						|| ctrlrequest->wValue
+							!= USB_ENDPOINT_HALT)
+					break;
+
+				if (ctrlrequest->wIndex & USB_DIR_IN)
+					musb_ep = &musb->endpoints[num].ep_in;
+				else
+					musb_ep = &musb->endpoints[num].ep_out;
+				if (!musb_ep->desc)
+					break;
+
+				/* REVISIT do it directly, no locking games */
+				spin_unlock(&musb->lock);
+				musb_gadget_set_halt(&musb_ep->end_point, 0);
+				spin_lock(&musb->lock);
+
+				/* select ep0 again */
+				musb_ep_select(mbase, 0);
+				handled = 1;
+				} break;
+			default:
+				/* class, vendor, etc ... delegate */
+				handled = 0;
+				break;
+			}
+			break;
+
+		case USB_REQ_SET_FEATURE:
+			switch (recip) {
+			case USB_RECIP_DEVICE:
+				handled = 1;
+				switch (ctrlrequest->wValue) {
+				case USB_DEVICE_REMOTE_WAKEUP:
+					musb->may_wakeup = 1;
+					break;
+				case USB_DEVICE_TEST_MODE:
+					if (musb->g.speed != USB_SPEED_HIGH)
+						goto stall;
+					if (ctrlrequest->wIndex & 0xff)
+						goto stall;
+
+					switch (ctrlrequest->wIndex >> 8) {
+					case 1:
+						pr_debug("TEST_J\n");
+						/* TEST_J */
+						musb->test_mode_nr =
+							MUSB_TEST_J;
+						break;
+					case 2:
+						/* TEST_K */
+						pr_debug("TEST_K\n");
+						musb->test_mode_nr =
+							MUSB_TEST_K;
+						break;
+					case 3:
+						/* TEST_SE0_NAK */
+						pr_debug("TEST_SE0_NAK\n");
+						musb->test_mode_nr =
+							MUSB_TEST_SE0_NAK;
+						break;
+					case 4:
+						/* TEST_PACKET */
+						pr_debug("TEST_PACKET\n");
+						musb->test_mode_nr =
+							MUSB_TEST_PACKET;
+						break;
+					default:
+						goto stall;
+					}
+
+					/* enter test mode after irq */
+					if (handled > 0)
+						musb->test_mode = true;
+					break;
+#ifdef CONFIG_USB_MUSB_OTG
+				case USB_DEVICE_B_HNP_ENABLE:
+					if (!musb->g.is_otg)
+						goto stall;
+					musb->g.b_hnp_enable = 1;
+					musb_try_b_hnp_enable(musb);
+					break;
+				case USB_DEVICE_A_HNP_SUPPORT:
+					if (!musb->g.is_otg)
+						goto stall;
+					musb->g.a_hnp_support = 1;
+					break;
+				case USB_DEVICE_A_ALT_HNP_SUPPORT:
+					if (!musb->g.is_otg)
+						goto stall;
+					musb->g.a_alt_hnp_support = 1;
+					break;
+#endif
+stall:
+				default:
+					handled = -EINVAL;
+					break;
+				}
+				break;
+
+			case USB_RECIP_INTERFACE:
+				break;
+
+			case USB_RECIP_ENDPOINT:{
+				const u8		epnum =
+					ctrlrequest->wIndex & 0x0f;
+				struct musb_ep		*musb_ep;
+				struct musb_hw_ep	*ep;
+				void __iomem		*regs;
+				int			is_in;
+				u16			csr;
+
+				if (epnum == 0
+						|| epnum >= MUSB_C_NUM_EPS
+						|| ctrlrequest->wValue
+							!= USB_ENDPOINT_HALT)
+					break;
+
+				ep = musb->endpoints + epnum;
+				regs = ep->regs;
+				is_in = ctrlrequest->wIndex & USB_DIR_IN;
+				if (is_in)
+					musb_ep = &ep->ep_in;
+				else
+					musb_ep = &ep->ep_out;
+				if (!musb_ep->desc)
+					break;
+
+				musb_ep_select(mbase, epnum);
+				if (is_in) {
+					csr = musb_readw(regs,
+							MUSB_TXCSR);
+					if (csr & MUSB_TXCSR_FIFONOTEMPTY)
+						csr |= MUSB_TXCSR_FLUSHFIFO;
+					csr |= MUSB_TXCSR_P_SENDSTALL
+						| MUSB_TXCSR_CLRDATATOG
+						| MUSB_TXCSR_P_WZC_BITS;
+					musb_writew(regs, MUSB_TXCSR,
+							csr);
+				} else {
+					csr = musb_readw(regs,
+							MUSB_RXCSR);
+					csr |= MUSB_RXCSR_P_SENDSTALL
+						| MUSB_RXCSR_FLUSHFIFO
+						| MUSB_RXCSR_CLRDATATOG
+						| MUSB_TXCSR_P_WZC_BITS;
+					musb_writew(regs, MUSB_RXCSR,
+							csr);
+				}
+
+				/* select ep0 again */
+				musb_ep_select(mbase, 0);
+				handled = 1;
+				} break;
+
+			default:
+				/* class, vendor, etc ... delegate */
+				handled = 0;
+				break;
+			}
+			break;
+		default:
+			/* delegate SET_CONFIGURATION, etc */
+			handled = 0;
+		}
+	} else
+		handled = 0;
+	return handled;
+}
+
+/* we have an ep0out data packet
+ * Context:  caller holds controller lock
+ */
+static void ep0_rxstate(struct musb *musb)
+{
+	void __iomem		*regs = musb->control_ep->regs;
+	struct usb_request	*req;
+	u16			tmp;
+
+	req = next_ep0_request(musb);
+
+	/* read packet and ack; or stall because of gadget driver bug:
+	 * should have provided the rx buffer before setup() returned.
+	 */
+	if (req) {
+		void		*buf = req->buf + req->actual;
+		unsigned	len = req->length - req->actual;
+
+		/* read the buffer */
+		tmp = musb_readb(regs, MUSB_COUNT0);
+		if (tmp > len) {
+			req->status = -EOVERFLOW;
+			tmp = len;
+		}
+		musb_read_fifo(&musb->endpoints[0], tmp, buf);
+		req->actual += tmp;
+		tmp = MUSB_CSR0_P_SVDRXPKTRDY;
+		if (tmp < 64 || req->actual == req->length) {
+			musb->ep0_state = MUSB_EP0_STAGE_STATUSIN;
+			tmp |= MUSB_CSR0_P_DATAEND;
+		} else
+			req = NULL;
+	} else
+		tmp = MUSB_CSR0_P_SVDRXPKTRDY | MUSB_CSR0_P_SENDSTALL;
+
+
+	/* Completion handler may choose to stall, e.g. because the
+	 * message just received holds invalid data.
+	 */
+	if (req) {
+		musb->ackpend = tmp;
+		musb_g_ep0_giveback(musb, req);
+		if (!musb->ackpend)
+			return;
+		musb->ackpend = 0;
+	}
+	musb_ep_select(musb->mregs, 0);
+	musb_writew(regs, MUSB_CSR0, tmp);
+}
+
+/*
+ * transmitting to the host (IN), this code might be called from IRQ
+ * and from kernel thread.
+ *
+ * Context:  caller holds controller lock
+ */
+static void ep0_txstate(struct musb *musb)
+{
+	void __iomem		*regs = musb->control_ep->regs;
+	struct usb_request	*request = next_ep0_request(musb);
+	u16			csr = MUSB_CSR0_TXPKTRDY;
+	u8			*fifo_src;
+	u8			fifo_count;
+
+	if (!request) {
+		/* WARN_ON(1); */
+		DBG(2, "odd; csr0 %04x\n", musb_readw(regs, MUSB_CSR0));
+		return;
+	}
+
+	/* load the data */
+	fifo_src = (u8 *) request->buf + request->actual;
+	fifo_count = min((unsigned) MUSB_EP0_FIFOSIZE,
+		request->length - request->actual);
+	musb_write_fifo(&musb->endpoints[0], fifo_count, fifo_src);
+	request->actual += fifo_count;
+
+	/* update the flags */
+	if (fifo_count < MUSB_MAX_END0_PACKET
+			|| request->actual == request->length) {
+		musb->ep0_state = MUSB_EP0_STAGE_STATUSOUT;
+		csr |= MUSB_CSR0_P_DATAEND;
+	} else
+		request = NULL;
+
+	/* report completions as soon as the fifo's loaded; there's no
+	 * win in waiting till this last packet gets acked.  (other than
+	 * very precise fault reporting, needed by USB TMC; possible with
+	 * this hardware, but not usable from portable gadget drivers.)
+	 */
+	if (request) {
+		musb->ackpend = csr;
+		musb_g_ep0_giveback(musb, request);
+		if (!musb->ackpend)
+			return;
+		musb->ackpend = 0;
+	}
+
+	/* send it out, triggering a "txpktrdy cleared" irq */
+	musb_ep_select(musb->mregs, 0);
+	musb_writew(regs, MUSB_CSR0, csr);
+}
+
+/*
+ * Read a SETUP packet (struct usb_ctrlrequest) from the hardware.
+ * Fields are left in USB byte-order.
+ *
+ * Context:  caller holds controller lock.
+ */
+static void
+musb_read_setup(struct musb *musb, struct usb_ctrlrequest *req)
+{
+	struct usb_request	*r;
+	void __iomem		*regs = musb->control_ep->regs;
+
+	musb_read_fifo(&musb->endpoints[0], sizeof *req, (u8 *)req);
+
+	/* NOTE:  earlier 2.6 versions changed setup packets to host
+	 * order, but now USB packets always stay in USB byte order.
+	 */
+	DBG(3, "SETUP req%02x.%02x v%04x i%04x l%d\n",
+		req->bRequestType,
+		req->bRequest,
+		le16_to_cpu(req->wValue),
+		le16_to_cpu(req->wIndex),
+		le16_to_cpu(req->wLength));
+
+	/* clean up any leftover transfers */
+	r = next_ep0_request(musb);
+	if (r)
+		musb_g_ep0_giveback(musb, r);
+
+	/* For zero-data requests we want to delay the STATUS stage to
+	 * avoid SETUPEND errors.  If we read data (OUT), delay accepting
+	 * packets until there's a buffer to store them in.
+	 *
+	 * If we write data, the controller acts happier if we enable
+	 * the TX FIFO right away, and give the controller a moment
+	 * to switch modes...
+	 */
+	musb->set_address = false;
+	musb->ackpend = MUSB_CSR0_P_SVDRXPKTRDY;
+	if (req->wLength == 0) {
+		if (req->bRequestType & USB_DIR_IN)
+			musb->ackpend |= MUSB_CSR0_TXPKTRDY;
+		musb->ep0_state = MUSB_EP0_STAGE_ACKWAIT;
+	} else if (req->bRequestType & USB_DIR_IN) {
+		musb->ep0_state = MUSB_EP0_STAGE_TX;
+		musb_writew(regs, MUSB_CSR0, MUSB_CSR0_P_SVDRXPKTRDY);
+		while ((musb_readw(regs, MUSB_CSR0)
+				& MUSB_CSR0_RXPKTRDY) != 0)
+			cpu_relax();
+		musb->ackpend = 0;
+	} else
+		musb->ep0_state = MUSB_EP0_STAGE_RX;
+}
+
+static int
+forward_to_driver(struct musb *musb, const struct usb_ctrlrequest *ctrlrequest)
+__releases(musb->lock)
+__acquires(musb->lock)
+{
+	int retval;
+	if (!musb->gadget_driver)
+		return -EOPNOTSUPP;
+	spin_unlock(&musb->lock);
+	retval = musb->gadget_driver->setup(&musb->g, ctrlrequest);
+	spin_lock(&musb->lock);
+	return retval;
+}
+
+/*
+ * Handle peripheral ep0 interrupt
+ *
+ * Context: irq handler; we won't re-enter the driver that way.
+ */
+irqreturn_t musb_g_ep0_irq(struct musb *musb)
+{
+	u16		csr;
+	u16		len;
+	void __iomem	*mbase = musb->mregs;
+	void __iomem	*regs = musb->endpoints[0].regs;
+	irqreturn_t	retval = IRQ_NONE;
+
+	musb_ep_select(mbase, 0);	/* select ep0 */
+	csr = musb_readw(regs, MUSB_CSR0);
+	len = musb_readb(regs, MUSB_COUNT0);
+
+	DBG(4, "csr %04x, count %d, myaddr %d, ep0stage %s\n",
+			csr, len,
+			musb_readb(mbase, MUSB_FADDR),
+			decode_ep0stage(musb->ep0_state));
+
+	/* I sent a stall.. need to acknowledge it now.. */
+	if (csr & MUSB_CSR0_P_SENTSTALL) {
+		musb_writew(regs, MUSB_CSR0,
+				csr & ~MUSB_CSR0_P_SENTSTALL);
+		retval = IRQ_HANDLED;
+		musb->ep0_state = MUSB_EP0_STAGE_SETUP;
+		csr = musb_readw(regs, MUSB_CSR0);
+	}
+
+	/* request ended "early" */
+	if (csr & MUSB_CSR0_P_SETUPEND) {
+		musb_writew(regs, MUSB_CSR0, MUSB_CSR0_P_SVDSETUPEND);
+		retval = IRQ_HANDLED;
+		musb->ep0_state = MUSB_EP0_STAGE_SETUP;
+		csr = musb_readw(regs, MUSB_CSR0);
+		/* NOTE:  request may need completion */
+	}
+
+	/* docs from Mentor only describe tx, rx, and idle/setup states.
+	 * we need to handle nuances around status stages, and also the
+	 * case where status and setup stages come back-to-back ...
+	 */
+	switch (musb->ep0_state) {
+
+	case MUSB_EP0_STAGE_TX:
+		/* irq on clearing txpktrdy */
+		if ((csr & MUSB_CSR0_TXPKTRDY) == 0) {
+			ep0_txstate(musb);
+			retval = IRQ_HANDLED;
+		}
+		break;
+
+	case MUSB_EP0_STAGE_RX:
+		/* irq on set rxpktrdy */
+		if (csr & MUSB_CSR0_RXPKTRDY) {
+			ep0_rxstate(musb);
+			retval = IRQ_HANDLED;
+		}
+		break;
+
+	case MUSB_EP0_STAGE_STATUSIN:
+		/* end of sequence #2 (OUT/RX state) or #3 (no data) */
+
+		/* update address (if needed) only @ the end of the
+		 * status phase per usb spec, which also guarantees
+		 * we get 10 msec to receive this irq... until this
+		 * is done we won't see the next packet.
+		 */
+		if (musb->set_address) {
+			musb->set_address = false;
+			musb_writeb(mbase, MUSB_FADDR, musb->address);
+		}
+
+		/* enter test mode if needed (exit by reset) */
+		else if (musb->test_mode) {
+			DBG(1, "entering TESTMODE\n");
+
+			if (MUSB_TEST_PACKET == musb->test_mode_nr)
+				musb_load_testpacket(musb);
+
+			musb_writeb(mbase, MUSB_TESTMODE,
+					musb->test_mode_nr);
+		}
+		/* FALLTHROUGH */
+
+	case MUSB_EP0_STAGE_STATUSOUT:
+		/* end of sequence #1: write to host (TX state) */
+		{
+			struct usb_request	*req;
+
+			req = next_ep0_request(musb);
+			if (req)
+				musb_g_ep0_giveback(musb, req);
+		}
+		retval = IRQ_HANDLED;
+		musb->ep0_state = MUSB_EP0_STAGE_SETUP;
+		/* FALLTHROUGH */
+
+	case MUSB_EP0_STAGE_SETUP:
+		if (csr & MUSB_CSR0_RXPKTRDY) {
+			struct usb_ctrlrequest	setup;
+			int			handled = 0;
+
+			if (len != 8) {
+				ERR("SETUP packet len %d != 8 ?\n", len);
+				break;
+			}
+			musb_read_setup(musb, &setup);
+			retval = IRQ_HANDLED;
+
+			/* sometimes the RESET won't be reported */
+			if (unlikely(musb->g.speed == USB_SPEED_UNKNOWN)) {
+				u8	power;
+
+				printk(KERN_NOTICE "%s: peripheral reset "
+						"irq lost!\n",
+						musb_driver_name);
+				power = musb_readb(mbase, MUSB_POWER);
+				musb->g.speed = (power & MUSB_POWER_HSMODE)
+					? USB_SPEED_HIGH : USB_SPEED_FULL;
+
+			}
+
+			switch (musb->ep0_state) {
+
+			/* sequence #3 (no data stage), includes requests
+			 * we can't forward (notably SET_ADDRESS and the
+			 * device/endpoint feature set/clear operations)
+			 * plus SET_CONFIGURATION and others we must
+			 */
+			case MUSB_EP0_STAGE_ACKWAIT:
+				handled = service_zero_data_request(
+						musb, &setup);
+
+				/* status stage might be immediate */
+				if (handled > 0) {
+					musb->ackpend |= MUSB_CSR0_P_DATAEND;
+					musb->ep0_state =
+						MUSB_EP0_STAGE_STATUSIN;
+				}
+				break;
+
+			/* sequence #1 (IN to host), includes GET_STATUS
+			 * requests that we can't forward, GET_DESCRIPTOR
+			 * and others that we must
+			 */
+			case MUSB_EP0_STAGE_TX:
+				handled = service_in_request(musb, &setup);
+				if (handled > 0) {
+					musb->ackpend = MUSB_CSR0_TXPKTRDY
+						| MUSB_CSR0_P_DATAEND;
+					musb->ep0_state =
+						MUSB_EP0_STAGE_STATUSOUT;
+				}
+				break;
+
+			/* sequence #2 (OUT from host), always forward */
+			default:		/* MUSB_EP0_STAGE_RX */
+				break;
+			}
+
+			DBG(3, "handled %d, csr %04x, ep0stage %s\n",
+				handled, csr,
+				decode_ep0stage(musb->ep0_state));
+
+			/* unless we need to delegate this to the gadget
+			 * driver, we know how to wrap this up:  csr0 has
+			 * not yet been written.
+			 */
+			if (handled < 0)
+				goto stall;
+			else if (handled > 0)
+				goto finish;
+
+			handled = forward_to_driver(musb, &setup);
+			if (handled < 0) {
+				musb_ep_select(mbase, 0);
+stall:
+				DBG(3, "stall (%d)\n", handled);
+				musb->ackpend |= MUSB_CSR0_P_SENDSTALL;
+				musb->ep0_state = MUSB_EP0_STAGE_SETUP;
+finish:
+				musb_writew(regs, MUSB_CSR0,
+						musb->ackpend);
+				musb->ackpend = 0;
+			}
+		}
+		break;
+
+	case MUSB_EP0_STAGE_ACKWAIT:
+		/* This should not happen. But happens with tusb6010 with
+		 * g_file_storage and high speed. Do nothing.
+		 */
+		retval = IRQ_HANDLED;
+		break;
+
+	default:
+		/* "can't happen" */
+		WARN_ON(1);
+		musb_writew(regs, MUSB_CSR0, MUSB_CSR0_P_SENDSTALL);
+		musb->ep0_state = MUSB_EP0_STAGE_SETUP;
+		break;
+	}
+
+	return retval;
+}
+
+
+static int
+musb_g_ep0_enable(struct usb_ep *ep, const struct usb_endpoint_descriptor *desc)
+{
+	/* always enabled */
+	return -EINVAL;
+}
+
+static int musb_g_ep0_disable(struct usb_ep *e)
+{
+	/* always enabled */
+	return -EINVAL;
+}
+
+static int
+musb_g_ep0_queue(struct usb_ep *e, struct usb_request *r, gfp_t gfp_flags)
+{
+	struct musb_ep		*ep;
+	struct musb_request	*req;
+	struct musb		*musb;
+	int			status;
+	unsigned long		lockflags;
+	void __iomem		*regs;
+
+	if (!e || !r)
+		return -EINVAL;
+
+	ep = to_musb_ep(e);
+	musb = ep->musb;
+	regs = musb->control_ep->regs;
+
+	req = to_musb_request(r);
+	req->musb = musb;
+	req->request.actual = 0;
+	req->request.status = -EINPROGRESS;
+	req->tx = ep->is_in;
+
+	spin_lock_irqsave(&musb->lock, lockflags);
+
+	if (!list_empty(&ep->req_list)) {
+		status = -EBUSY;
+		goto cleanup;
+	}
+
+	switch (musb->ep0_state) {
+	case MUSB_EP0_STAGE_RX:		/* control-OUT data */
+	case MUSB_EP0_STAGE_TX:		/* control-IN data */
+	case MUSB_EP0_STAGE_ACKWAIT:	/* zero-length data */
+		status = 0;
+		break;
+	default:
+		DBG(1, "ep0 request queued in state %d\n",
+				musb->ep0_state);
+		status = -EINVAL;
+		goto cleanup;
+	}
+
+	/* add request to the list */
+	list_add_tail(&(req->request.list), &(ep->req_list));
+
+	DBG(3, "queue to %s (%s), length=%d\n",
+			ep->name, ep->is_in ? "IN/TX" : "OUT/RX",
+			req->request.length);
+
+	musb_ep_select(musb->mregs, 0);
+
+	/* sequence #1, IN ... start writing the data */
+	if (musb->ep0_state == MUSB_EP0_STAGE_TX)
+		ep0_txstate(musb);
+
+	/* sequence #3, no-data ... issue IN status */
+	else if (musb->ep0_state == MUSB_EP0_STAGE_ACKWAIT) {
+		if (req->request.length)
+			status = -EINVAL;
+		else {
+			musb->ep0_state = MUSB_EP0_STAGE_STATUSIN;
+			musb_writew(regs, MUSB_CSR0,
+					musb->ackpend | MUSB_CSR0_P_DATAEND);
+			musb->ackpend = 0;
+			musb_g_ep0_giveback(ep->musb, r);
+		}
+
+	/* else for sequence #2 (OUT), caller provides a buffer
+	 * before the next packet arrives.  deferred responses
+	 * (after SETUP is acked) are racey.
+	 */
+	} else if (musb->ackpend) {
+		musb_writew(regs, MUSB_CSR0, musb->ackpend);
+		musb->ackpend = 0;
+	}
+
+cleanup:
+	spin_unlock_irqrestore(&musb->lock, lockflags);
+	return status;
+}
+
+static int musb_g_ep0_dequeue(struct usb_ep *ep, struct usb_request *req)
+{
+	/* we just won't support this */
+	return -EINVAL;
+}
+
+static int musb_g_ep0_halt(struct usb_ep *e, int value)
+{
+	struct musb_ep		*ep;
+	struct musb		*musb;
+	void __iomem		*base, *regs;
+	unsigned long		flags;
+	int			status;
+	u16			csr;
+
+	if (!e || !value)
+		return -EINVAL;
+
+	ep = to_musb_ep(e);
+	musb = ep->musb;
+	base = musb->mregs;
+	regs = musb->control_ep->regs;
+	status = 0;
+
+	spin_lock_irqsave(&musb->lock, flags);
+
+	if (!list_empty(&ep->req_list)) {
+		status = -EBUSY;
+		goto cleanup;
+	}
+
+	musb_ep_select(base, 0);
+	csr = musb->ackpend;
+
+	switch (musb->ep0_state) {
+
+	/* Stalls are usually issued after parsing SETUP packet, either
+	 * directly in irq context from setup() or else later.
+	 */
+	case MUSB_EP0_STAGE_TX:		/* control-IN data */
+	case MUSB_EP0_STAGE_ACKWAIT:	/* STALL for zero-length data */
+	case MUSB_EP0_STAGE_RX:		/* control-OUT data */
+		csr = musb_readw(regs, MUSB_CSR0);
+		/* FALLTHROUGH */
+
+	/* It's also OK to issue stalls during callbacks when a non-empty
+	 * DATA stage buffer has been read (or even written).
+	 */
+	case MUSB_EP0_STAGE_STATUSIN:	/* control-OUT status */
+	case MUSB_EP0_STAGE_STATUSOUT:	/* control-IN status */
+
+		csr |= MUSB_CSR0_P_SENDSTALL;
+		musb_writew(regs, MUSB_CSR0, csr);
+		musb->ep0_state = MUSB_EP0_STAGE_SETUP;
+		musb->ackpend = 0;
+		break;
+	default:
+		DBG(1, "ep0 can't halt in state %d\n", musb->ep0_state);
+		status = -EINVAL;
+	}
+
+cleanup:
+	spin_unlock_irqrestore(&musb->lock, flags);
+	return status;
+}
+
+const struct usb_ep_ops musb_g_ep0_ops = {
+	.enable		= musb_g_ep0_enable,
+	.disable	= musb_g_ep0_disable,
+	.alloc_request	= musb_alloc_request,
+	.free_request	= musb_free_request,
+	.queue		= musb_g_ep0_queue,
+	.dequeue	= musb_g_ep0_dequeue,
+	.set_halt	= musb_g_ep0_halt,
+};
diff --git a/drivers/usb/musb/musb_host.c b/drivers/usb/musb/musb_host.c
new file mode 100644
index 000000000000..8b4be012669a
--- /dev/null
+++ b/drivers/usb/musb/musb_host.c
@@ -0,0 +1,2170 @@
+/*
+ * MUSB OTG driver host support
+ *
+ * Copyright 2005 Mentor Graphics Corporation
+ * Copyright (C) 2005-2006 by Texas Instruments
+ * Copyright (C) 2006-2007 Nokia Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ * THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
+ * NO EVENT SHALL THE AUTHORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/delay.h>
+#include <linux/sched.h>
+#include <linux/slab.h>
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/list.h>
+
+#include "musb_core.h"
+#include "musb_host.h"
+
+
+/* MUSB HOST status 22-mar-2006
+ *
+ * - There's still lots of partial code duplication for fault paths, so
+ *   they aren't handled as consistently as they need to be.
+ *
+ * - PIO mostly behaved when last tested.
+ *     + including ep0, with all usbtest cases 9, 10
+ *     + usbtest 14 (ep0out) doesn't seem to run at all
+ *     + double buffered OUT/TX endpoints saw stalls(!) with certain usbtest
+ *       configurations, but otherwise double buffering passes basic tests.
+ *     + for 2.6.N, for N > ~10, needs API changes for hcd framework.
+ *
+ * - DMA (CPPI) ... partially behaves, not currently recommended
+ *     + about 1/15 the speed of typical EHCI implementations (PCI)
+ *     + RX, all too often reqpkt seems to misbehave after tx
+ *     + TX, no known issues (other than evident silicon issue)
+ *
+ * - DMA (Mentor/OMAP) ...has at least toggle update problems
+ *
+ * - Still no traffic scheduling code to make NAKing for bulk or control
+ *   transfers unable to starve other requests; or to make efficient use
+ *   of hardware with periodic transfers.  (Note that network drivers
+ *   commonly post bulk reads that stay pending for a long time; these
+ *   would make very visible trouble.)
+ *
+ * - Not tested with HNP, but some SRP paths seem to behave.
+ *
+ * NOTE 24-August-2006:
+ *
+ * - Bulk traffic finally uses both sides of hardware ep1, freeing up an
+ *   extra endpoint for periodic use enabling hub + keybd + mouse.  That
+ *   mostly works, except that with "usbnet" it's easy to trigger cases
+ *   with "ping" where RX loses.  (a) ping to davinci, even "ping -f",
+ *   fine; but (b) ping _from_ davinci, even "ping -c 1", ICMP RX loses
+ *   although ARP RX wins.  (That test was done with a full speed link.)
+ */
+
+
+/*
+ * NOTE on endpoint usage:
+ *
+ * CONTROL transfers all go through ep0.  BULK ones go through dedicated IN
+ * and OUT endpoints ... hardware is dedicated for those "async" queue(s).
+ *
+ * (Yes, bulk _could_ use more of the endpoints than that, and would even
+ * benefit from it ... one remote device may easily be NAKing while others
+ * need to perform transfers in that same direction.  The same thing could
+ * be done in software though, assuming dma cooperates.)
+ *
+ * INTERUPPT and ISOCHRONOUS transfers are scheduled to the other endpoints.
+ * So far that scheduling is both dumb and optimistic:  the endpoint will be
+ * "claimed" until its software queue is no longer refilled.  No multiplexing
+ * of transfers between endpoints, or anything clever.
+ */
+
+
+static void musb_ep_program(struct musb *musb, u8 epnum,
+			struct urb *urb, unsigned int nOut,
+			u8 *buf, u32 len);
+
+/*
+ * Clear TX fifo. Needed to avoid BABBLE errors.
+ */
+static inline void musb_h_tx_flush_fifo(struct musb_hw_ep *ep)
+{
+	void __iomem	*epio = ep->regs;
+	u16		csr;
+	int		retries = 1000;
+
+	csr = musb_readw(epio, MUSB_TXCSR);
+	while (csr & MUSB_TXCSR_FIFONOTEMPTY) {
+		DBG(5, "Host TX FIFONOTEMPTY csr: %02x\n", csr);
+		csr |= MUSB_TXCSR_FLUSHFIFO;
+		musb_writew(epio, MUSB_TXCSR, csr);
+		csr = musb_readw(epio, MUSB_TXCSR);
+		if (retries-- < 1) {
+			ERR("Could not flush host TX fifo: csr: %04x\n", csr);
+			return;
+		}
+		mdelay(1);
+	}
+}
+
+/*
+ * Start transmit. Caller is responsible for locking shared resources.
+ * musb must be locked.
+ */
+static inline void musb_h_tx_start(struct musb_hw_ep *ep)
+{
+	u16	txcsr;
+
+	/* NOTE: no locks here; caller should lock and select EP */
+	if (ep->epnum) {
+		txcsr = musb_readw(ep->regs, MUSB_TXCSR);
+		txcsr |= MUSB_TXCSR_TXPKTRDY | MUSB_TXCSR_H_WZC_BITS;
+		musb_writew(ep->regs, MUSB_TXCSR, txcsr);
+	} else {
+		txcsr = MUSB_CSR0_H_SETUPPKT | MUSB_CSR0_TXPKTRDY;
+		musb_writew(ep->regs, MUSB_CSR0, txcsr);
+	}
+
+}
+
+static inline void cppi_host_txdma_start(struct musb_hw_ep *ep)
+{
+	u16	txcsr;
+
+	/* NOTE: no locks here; caller should lock and select EP */
+	txcsr = musb_readw(ep->regs, MUSB_TXCSR);
+	txcsr |= MUSB_TXCSR_DMAENAB | MUSB_TXCSR_H_WZC_BITS;
+	musb_writew(ep->regs, MUSB_TXCSR, txcsr);
+}
+
+/*
+ * Start the URB at the front of an endpoint's queue
+ * end must be claimed from the caller.
+ *
+ * Context: controller locked, irqs blocked
+ */
+static void
+musb_start_urb(struct musb *musb, int is_in, struct musb_qh *qh)
+{
+	u16			frame;
+	u32			len;
+	void			*buf;
+	void __iomem		*mbase =  musb->mregs;
+	struct urb		*urb = next_urb(qh);
+	struct musb_hw_ep	*hw_ep = qh->hw_ep;
+	unsigned		pipe = urb->pipe;
+	u8			address = usb_pipedevice(pipe);
+	int			epnum = hw_ep->epnum;
+
+	/* initialize software qh state */
+	qh->offset = 0;
+	qh->segsize = 0;
+
+	/* gather right source of data */
+	switch (qh->type) {
+	case USB_ENDPOINT_XFER_CONTROL:
+		/* control transfers always start with SETUP */
+		is_in = 0;
+		hw_ep->out_qh = qh;
+		musb->ep0_stage = MUSB_EP0_START;
+		buf = urb->setup_packet;
+		len = 8;
+		break;
+	case USB_ENDPOINT_XFER_ISOC:
+		qh->iso_idx = 0;
+		qh->frame = 0;
+		buf = urb->transfer_buffer + urb->iso_frame_desc[0].offset;
+		len = urb->iso_frame_desc[0].length;
+		break;
+	default:		/* bulk, interrupt */
+		buf = urb->transfer_buffer;
+		len = urb->transfer_buffer_length;
+	}
+
+	DBG(4, "qh %p urb %p dev%d ep%d%s%s, hw_ep %d, %p/%d\n",
+			qh, urb, address, qh->epnum,
+			is_in ? "in" : "out",
+			({char *s; switch (qh->type) {
+			case USB_ENDPOINT_XFER_CONTROL:	s = ""; break;
+			case USB_ENDPOINT_XFER_BULK:	s = "-bulk"; break;
+			case USB_ENDPOINT_XFER_ISOC:	s = "-iso"; break;
+			default:			s = "-intr"; break;
+			}; s; }),
+			epnum, buf, len);
+
+	/* Configure endpoint */
+	if (is_in || hw_ep->is_shared_fifo)
+		hw_ep->in_qh = qh;
+	else
+		hw_ep->out_qh = qh;
+	musb_ep_program(musb, epnum, urb, !is_in, buf, len);
+
+	/* transmit may have more work: start it when it is time */
+	if (is_in)
+		return;
+
+	/* determine if the time is right for a periodic transfer */
+	switch (qh->type) {
+	case USB_ENDPOINT_XFER_ISOC:
+	case USB_ENDPOINT_XFER_INT:
+		DBG(3, "check whether there's still time for periodic Tx\n");
+		qh->iso_idx = 0;
+		frame = musb_readw(mbase, MUSB_FRAME);
+		/* FIXME this doesn't implement that scheduling policy ...
+		 * or handle framecounter wrapping
+		 */
+		if ((urb->transfer_flags & URB_ISO_ASAP)
+				|| (frame >= urb->start_frame)) {
+			/* REVISIT the SOF irq handler shouldn't duplicate
+			 * this code; and we don't init urb->start_frame...
+			 */
+			qh->frame = 0;
+			goto start;
+		} else {
+			qh->frame = urb->start_frame;
+			/* enable SOF interrupt so we can count down */
+			DBG(1, "SOF for %d\n", epnum);
+#if 1 /* ifndef	CONFIG_ARCH_DAVINCI */
+			musb_writeb(mbase, MUSB_INTRUSBE, 0xff);
+#endif
+		}
+		break;
+	default:
+start:
+		DBG(4, "Start TX%d %s\n", epnum,
+			hw_ep->tx_channel ? "dma" : "pio");
+
+		if (!hw_ep->tx_channel)
+			musb_h_tx_start(hw_ep);
+		else if (is_cppi_enabled() || tusb_dma_omap())
+			cppi_host_txdma_start(hw_ep);
+	}
+}
+
+/* caller owns controller lock, irqs are blocked */
+static void
+__musb_giveback(struct musb *musb, struct urb *urb, int status)
+__releases(musb->lock)
+__acquires(musb->lock)
+{
+	DBG(({ int level; switch (urb->status) {
+				case 0:
+					level = 4;
+					break;
+				/* common/boring faults */
+				case -EREMOTEIO:
+				case -ESHUTDOWN:
+				case -ECONNRESET:
+				case -EPIPE:
+					level = 3;
+					break;
+				default:
+					level = 2;
+					break;
+				}; level; }),
+			"complete %p (%d), dev%d ep%d%s, %d/%d\n",
+			urb, urb->status,
+			usb_pipedevice(urb->pipe),
+			usb_pipeendpoint(urb->pipe),
+			usb_pipein(urb->pipe) ? "in" : "out",
+			urb->actual_length, urb->transfer_buffer_length
+			);
+
+	spin_unlock(&musb->lock);
+	usb_hcd_giveback_urb(musb_to_hcd(musb), urb, status);
+	spin_lock(&musb->lock);
+}
+
+/* for bulk/interrupt endpoints only */
+static inline void
+musb_save_toggle(struct musb_hw_ep *ep, int is_in, struct urb *urb)
+{
+	struct usb_device	*udev = urb->dev;
+	u16			csr;
+	void __iomem		*epio = ep->regs;
+	struct musb_qh		*qh;
+
+	/* FIXME:  the current Mentor DMA code seems to have
+	 * problems getting toggle correct.
+	 */
+
+	if (is_in || ep->is_shared_fifo)
+		qh = ep->in_qh;
+	else
+		qh = ep->out_qh;
+
+	if (!is_in) {
+		csr = musb_readw(epio, MUSB_TXCSR);
+		usb_settoggle(udev, qh->epnum, 1,
+			(csr & MUSB_TXCSR_H_DATATOGGLE)
+				? 1 : 0);
+	} else {
+		csr = musb_readw(epio, MUSB_RXCSR);
+		usb_settoggle(udev, qh->epnum, 0,
+			(csr & MUSB_RXCSR_H_DATATOGGLE)
+				? 1 : 0);
+	}
+}
+
+/* caller owns controller lock, irqs are blocked */
+static struct musb_qh *
+musb_giveback(struct musb_qh *qh, struct urb *urb, int status)
+{
+	int			is_in;
+	struct musb_hw_ep	*ep = qh->hw_ep;
+	struct musb		*musb = ep->musb;
+	int			ready = qh->is_ready;
+
+	if (ep->is_shared_fifo)
+		is_in = 1;
+	else
+		is_in = usb_pipein(urb->pipe);
+
+	/* save toggle eagerly, for paranoia */
+	switch (qh->type) {
+	case USB_ENDPOINT_XFER_BULK:
+	case USB_ENDPOINT_XFER_INT:
+		musb_save_toggle(ep, is_in, urb);
+		break;
+	case USB_ENDPOINT_XFER_ISOC:
+		if (status == 0 && urb->error_count)
+			status = -EXDEV;
+		break;
+	}
+
+	usb_hcd_unlink_urb_from_ep(musb_to_hcd(musb), urb);
+
+	qh->is_ready = 0;
+	__musb_giveback(musb, urb, status);
+	qh->is_ready = ready;
+
+	/* reclaim resources (and bandwidth) ASAP; deschedule it, and
+	 * invalidate qh as soon as list_empty(&hep->urb_list)
+	 */
+	if (list_empty(&qh->hep->urb_list)) {
+		struct list_head	*head;
+
+		if (is_in)
+			ep->rx_reinit = 1;
+		else
+			ep->tx_reinit = 1;
+
+		/* clobber old pointers to this qh */
+		if (is_in || ep->is_shared_fifo)
+			ep->in_qh = NULL;
+		else
+			ep->out_qh = NULL;
+		qh->hep->hcpriv = NULL;
+
+		switch (qh->type) {
+
+		case USB_ENDPOINT_XFER_ISOC:
+		case USB_ENDPOINT_XFER_INT:
+			/* this is where periodic bandwidth should be
+			 * de-allocated if it's tracked and allocated;
+			 * and where we'd update the schedule tree...
+			 */
+			musb->periodic[ep->epnum] = NULL;
+			kfree(qh);
+			qh = NULL;
+			break;
+
+		case USB_ENDPOINT_XFER_CONTROL:
+		case USB_ENDPOINT_XFER_BULK:
+			/* fifo policy for these lists, except that NAKing
+			 * should rotate a qh to the end (for fairness).
+			 */
+			head = qh->ring.prev;
+			list_del(&qh->ring);
+			kfree(qh);
+			qh = first_qh(head);
+			break;
+		}
+	}
+	return qh;
+}
+
+/*
+ * Advance this hardware endpoint's queue, completing the specified urb and
+ * advancing to either the next urb queued to that qh, or else invalidating
+ * that qh and advancing to the next qh scheduled after the current one.
+ *
+ * Context: caller owns controller lock, irqs are blocked
+ */
+static void
+musb_advance_schedule(struct musb *musb, struct urb *urb,
+		struct musb_hw_ep *hw_ep, int is_in)
+{
+	struct musb_qh	*qh;
+
+	if (is_in || hw_ep->is_shared_fifo)
+		qh = hw_ep->in_qh;
+	else
+		qh = hw_ep->out_qh;
+
+	if (urb->status == -EINPROGRESS)
+		qh = musb_giveback(qh, urb, 0);
+	else
+		qh = musb_giveback(qh, urb, urb->status);
+
+	if (qh && qh->is_ready && !list_empty(&qh->hep->urb_list)) {
+		DBG(4, "... next ep%d %cX urb %p\n",
+				hw_ep->epnum, is_in ? 'R' : 'T',
+				next_urb(qh));
+		musb_start_urb(musb, is_in, qh);
+	}
+}
+
+static inline u16 musb_h_flush_rxfifo(struct musb_hw_ep *hw_ep, u16 csr)
+{
+	/* we don't want fifo to fill itself again;
+	 * ignore dma (various models),
+	 * leave toggle alone (may not have been saved yet)
+	 */
+	csr |= MUSB_RXCSR_FLUSHFIFO | MUSB_RXCSR_RXPKTRDY;
+	csr &= ~(MUSB_RXCSR_H_REQPKT
+		| MUSB_RXCSR_H_AUTOREQ
+		| MUSB_RXCSR_AUTOCLEAR);
+
+	/* write 2x to allow double buffering */
+	musb_writew(hw_ep->regs, MUSB_RXCSR, csr);
+	musb_writew(hw_ep->regs, MUSB_RXCSR, csr);
+
+	/* flush writebuffer */
+	return musb_readw(hw_ep->regs, MUSB_RXCSR);
+}
+
+/*
+ * PIO RX for a packet (or part of it).
+ */
+static bool
+musb_host_packet_rx(struct musb *musb, struct urb *urb, u8 epnum, u8 iso_err)
+{
+	u16			rx_count;
+	u8			*buf;
+	u16			csr;
+	bool			done = false;
+	u32			length;
+	int			do_flush = 0;
+	struct musb_hw_ep	*hw_ep = musb->endpoints + epnum;
+	void __iomem		*epio = hw_ep->regs;
+	struct musb_qh		*qh = hw_ep->in_qh;
+	int			pipe = urb->pipe;
+	void			*buffer = urb->transfer_buffer;
+
+	/* musb_ep_select(mbase, epnum); */
+	rx_count = musb_readw(epio, MUSB_RXCOUNT);
+	DBG(3, "RX%d count %d, buffer %p len %d/%d\n", epnum, rx_count,
+			urb->transfer_buffer, qh->offset,
+			urb->transfer_buffer_length);
+
+	/* unload FIFO */
+	if (usb_pipeisoc(pipe)) {
+		int					status = 0;
+		struct usb_iso_packet_descriptor	*d;
+
+		if (iso_err) {
+			status = -EILSEQ;
+			urb->error_count++;
+		}
+
+		d = urb->iso_frame_desc + qh->iso_idx;
+		buf = buffer + d->offset;
+		length = d->length;
+		if (rx_count > length) {
+			if (status == 0) {
+				status = -EOVERFLOW;
+				urb->error_count++;
+			}
+			DBG(2, "** OVERFLOW %d into %d\n", rx_count, length);
+			do_flush = 1;
+		} else
+			length = rx_count;
+		urb->actual_length += length;
+		d->actual_length = length;
+
+		d->status = status;
+
+		/* see if we are done */
+		done = (++qh->iso_idx >= urb->number_of_packets);
+	} else {
+		/* non-isoch */
+		buf = buffer + qh->offset;
+		length = urb->transfer_buffer_length - qh->offset;
+		if (rx_count > length) {
+			if (urb->status == -EINPROGRESS)
+				urb->status = -EOVERFLOW;
+			DBG(2, "** OVERFLOW %d into %d\n", rx_count, length);
+			do_flush = 1;
+		} else
+			length = rx_count;
+		urb->actual_length += length;
+		qh->offset += length;
+
+		/* see if we are done */
+		done = (urb->actual_length == urb->transfer_buffer_length)
+			|| (rx_count < qh->maxpacket)
+			|| (urb->status != -EINPROGRESS);
+		if (done
+				&& (urb->status == -EINPROGRESS)
+				&& (urb->transfer_flags & URB_SHORT_NOT_OK)
+				&& (urb->actual_length
+					< urb->transfer_buffer_length))
+			urb->status = -EREMOTEIO;
+	}
+
+	musb_read_fifo(hw_ep, length, buf);
+
+	csr = musb_readw(epio, MUSB_RXCSR);
+	csr |= MUSB_RXCSR_H_WZC_BITS;
+	if (unlikely(do_flush))
+		musb_h_flush_rxfifo(hw_ep, csr);
+	else {
+		/* REVISIT this assumes AUTOCLEAR is never set */
+		csr &= ~(MUSB_RXCSR_RXPKTRDY | MUSB_RXCSR_H_REQPKT);
+		if (!done)
+			csr |= MUSB_RXCSR_H_REQPKT;
+		musb_writew(epio, MUSB_RXCSR, csr);
+	}
+
+	return done;
+}
+
+/* we don't always need to reinit a given side of an endpoint...
+ * when we do, use tx/rx reinit routine and then construct a new CSR
+ * to address data toggle, NYET, and DMA or PIO.
+ *
+ * it's possible that driver bugs (especially for DMA) or aborting a
+ * transfer might have left the endpoint busier than it should be.
+ * the busy/not-empty tests are basically paranoia.
+ */
+static void
+musb_rx_reinit(struct musb *musb, struct musb_qh *qh, struct musb_hw_ep *ep)
+{
+	u16	csr;
+
+	/* NOTE:  we know the "rx" fifo reinit never triggers for ep0.
+	 * That always uses tx_reinit since ep0 repurposes TX register
+	 * offsets; the initial SETUP packet is also a kind of OUT.
+	 */
+
+	/* if programmed for Tx, put it in RX mode */
+	if (ep->is_shared_fifo) {
+		csr = musb_readw(ep->regs, MUSB_TXCSR);
+		if (csr & MUSB_TXCSR_MODE) {
+			musb_h_tx_flush_fifo(ep);
+			musb_writew(ep->regs, MUSB_TXCSR,
+					MUSB_TXCSR_FRCDATATOG);
+		}
+		/* clear mode (and everything else) to enable Rx */
+		musb_writew(ep->regs, MUSB_TXCSR, 0);
+
+	/* scrub all previous state, clearing toggle */
+	} else {
+		csr = musb_readw(ep->regs, MUSB_RXCSR);
+		if (csr & MUSB_RXCSR_RXPKTRDY)
+			WARNING("rx%d, packet/%d ready?\n", ep->epnum,
+				musb_readw(ep->regs, MUSB_RXCOUNT));
+
+		musb_h_flush_rxfifo(ep, MUSB_RXCSR_CLRDATATOG);
+	}
+
+	/* target addr and (for multipoint) hub addr/port */
+	if (musb->is_multipoint) {
+		musb_writeb(ep->target_regs, MUSB_RXFUNCADDR,
+			qh->addr_reg);
+		musb_writeb(ep->target_regs, MUSB_RXHUBADDR,
+			qh->h_addr_reg);
+		musb_writeb(ep->target_regs, MUSB_RXHUBPORT,
+			qh->h_port_reg);
+	} else
+		musb_writeb(musb->mregs, MUSB_FADDR, qh->addr_reg);
+
+	/* protocol/endpoint, interval/NAKlimit, i/o size */
+	musb_writeb(ep->regs, MUSB_RXTYPE, qh->type_reg);
+	musb_writeb(ep->regs, MUSB_RXINTERVAL, qh->intv_reg);
+	/* NOTE: bulk combining rewrites high bits of maxpacket */
+	musb_writew(ep->regs, MUSB_RXMAXP, qh->maxpacket);
+
+	ep->rx_reinit = 0;
+}
+
+
+/*
+ * Program an HDRC endpoint as per the given URB
+ * Context: irqs blocked, controller lock held
+ */
+static void musb_ep_program(struct musb *musb, u8 epnum,
+			struct urb *urb, unsigned int is_out,
+			u8 *buf, u32 len)
+{
+	struct dma_controller	*dma_controller;
+	struct dma_channel	*dma_channel;
+	u8			dma_ok;
+	void __iomem		*mbase = musb->mregs;
+	struct musb_hw_ep	*hw_ep = musb->endpoints + epnum;
+	void __iomem		*epio = hw_ep->regs;
+	struct musb_qh		*qh;
+	u16			packet_sz;
+
+	if (!is_out || hw_ep->is_shared_fifo)
+		qh = hw_ep->in_qh;
+	else
+		qh = hw_ep->out_qh;
+
+	packet_sz = qh->maxpacket;
+
+	DBG(3, "%s hw%d urb %p spd%d dev%d ep%d%s "
+				"h_addr%02x h_port%02x bytes %d\n",
+			is_out ? "-->" : "<--",
+			epnum, urb, urb->dev->speed,
+			qh->addr_reg, qh->epnum, is_out ? "out" : "in",
+			qh->h_addr_reg, qh->h_port_reg,
+			len);
+
+	musb_ep_select(mbase, epnum);
+
+	/* candidate for DMA? */
+	dma_controller = musb->dma_controller;
+	if (is_dma_capable() && epnum && dma_controller) {
+		dma_channel = is_out ? hw_ep->tx_channel : hw_ep->rx_channel;
+		if (!dma_channel) {
+			dma_channel = dma_controller->channel_alloc(
+					dma_controller, hw_ep, is_out);
+			if (is_out)
+				hw_ep->tx_channel = dma_channel;
+			else
+				hw_ep->rx_channel = dma_channel;
+		}
+	} else
+		dma_channel = NULL;
+
+	/* make sure we clear DMAEnab, autoSet bits from previous run */
+
+	/* OUT/transmit/EP0 or IN/receive? */
+	if (is_out) {
+		u16	csr;
+		u16	int_txe;
+		u16	load_count;
+
+		csr = musb_readw(epio, MUSB_TXCSR);
+
+		/* disable interrupt in case we flush */
+		int_txe = musb_readw(mbase, MUSB_INTRTXE);
+		musb_writew(mbase, MUSB_INTRTXE, int_txe & ~(1 << epnum));
+
+		/* general endpoint setup */
+		if (epnum) {
+			/* ASSERT:  TXCSR_DMAENAB was already cleared */
+
+			/* flush all old state, set default */
+			musb_h_tx_flush_fifo(hw_ep);
+			csr &= ~(MUSB_TXCSR_H_NAKTIMEOUT
+					| MUSB_TXCSR_DMAMODE
+					| MUSB_TXCSR_FRCDATATOG
+					| MUSB_TXCSR_H_RXSTALL
+					| MUSB_TXCSR_H_ERROR
+					| MUSB_TXCSR_TXPKTRDY
+					);
+			csr |= MUSB_TXCSR_MODE;
+
+			if (usb_gettoggle(urb->dev,
+					qh->epnum, 1))
+				csr |= MUSB_TXCSR_H_WR_DATATOGGLE
+					| MUSB_TXCSR_H_DATATOGGLE;
+			else
+				csr |= MUSB_TXCSR_CLRDATATOG;
+
+			/* twice in case of double packet buffering */
+			musb_writew(epio, MUSB_TXCSR, csr);
+			/* REVISIT may need to clear FLUSHFIFO ... */
+			musb_writew(epio, MUSB_TXCSR, csr);
+			csr = musb_readw(epio, MUSB_TXCSR);
+		} else {
+			/* endpoint 0: just flush */
+			musb_writew(epio, MUSB_CSR0,
+				csr | MUSB_CSR0_FLUSHFIFO);
+			musb_writew(epio, MUSB_CSR0,
+				csr | MUSB_CSR0_FLUSHFIFO);
+		}
+
+		/* target addr and (for multipoint) hub addr/port */
+		if (musb->is_multipoint) {
+			musb_writeb(mbase,
+				MUSB_BUSCTL_OFFSET(epnum, MUSB_TXFUNCADDR),
+				qh->addr_reg);
+			musb_writeb(mbase,
+				MUSB_BUSCTL_OFFSET(epnum, MUSB_TXHUBADDR),
+				qh->h_addr_reg);
+			musb_writeb(mbase,
+				MUSB_BUSCTL_OFFSET(epnum, MUSB_TXHUBPORT),
+				qh->h_port_reg);
+/* FIXME if !epnum, do the same for RX ... */
+		} else
+			musb_writeb(mbase, MUSB_FADDR, qh->addr_reg);
+
+		/* protocol/endpoint/interval/NAKlimit */
+		if (epnum) {
+			musb_writeb(epio, MUSB_TXTYPE, qh->type_reg);
+			if (can_bulk_split(musb, qh->type))
+				musb_writew(epio, MUSB_TXMAXP,
+					packet_sz
+					| ((hw_ep->max_packet_sz_tx /
+						packet_sz) - 1) << 11);
+			else
+				musb_writew(epio, MUSB_TXMAXP,
+					packet_sz);
+			musb_writeb(epio, MUSB_TXINTERVAL, qh->intv_reg);
+		} else {
+			musb_writeb(epio, MUSB_NAKLIMIT0, qh->intv_reg);
+			if (musb->is_multipoint)
+				musb_writeb(epio, MUSB_TYPE0,
+						qh->type_reg);
+		}
+
+		if (can_bulk_split(musb, qh->type))
+			load_count = min((u32) hw_ep->max_packet_sz_tx,
+						len);
+		else
+			load_count = min((u32) packet_sz, len);
+
+#ifdef CONFIG_USB_INVENTRA_DMA
+		if (dma_channel) {
+
+			/* clear previous state */
+			csr = musb_readw(epio, MUSB_TXCSR);
+			csr &= ~(MUSB_TXCSR_AUTOSET
+				| MUSB_TXCSR_DMAMODE
+				| MUSB_TXCSR_DMAENAB);
+			csr |= MUSB_TXCSR_MODE;
+			musb_writew(epio, MUSB_TXCSR,
+				csr | MUSB_TXCSR_MODE);
+
+			qh->segsize = min(len, dma_channel->max_len);
+
+			if (qh->segsize <= packet_sz)
+				dma_channel->desired_mode = 0;
+			else
+				dma_channel->desired_mode = 1;
+
+
+			if (dma_channel->desired_mode == 0) {
+				csr &= ~(MUSB_TXCSR_AUTOSET
+					| MUSB_TXCSR_DMAMODE);
+				csr |= (MUSB_TXCSR_DMAENAB);
+					/* against programming guide */
+			} else
+				csr |= (MUSB_TXCSR_AUTOSET
+					| MUSB_TXCSR_DMAENAB
+					| MUSB_TXCSR_DMAMODE);
+
+			musb_writew(epio, MUSB_TXCSR, csr);
+
+			dma_ok = dma_controller->channel_program(
+					dma_channel, packet_sz,
+					dma_channel->desired_mode,
+					urb->transfer_dma,
+					qh->segsize);
+			if (dma_ok) {
+				load_count = 0;
+			} else {
+				dma_controller->channel_release(dma_channel);
+				if (is_out)
+					hw_ep->tx_channel = NULL;
+				else
+					hw_ep->rx_channel = NULL;
+				dma_channel = NULL;
+			}
+		}
+#endif
+
+		/* candidate for DMA */
+		if ((is_cppi_enabled() || tusb_dma_omap()) && dma_channel) {
+
+			/* program endpoint CSRs first, then setup DMA.
+			 * assume CPPI setup succeeds.
+			 * defer enabling dma.
+			 */
+			csr = musb_readw(epio, MUSB_TXCSR);
+			csr &= ~(MUSB_TXCSR_AUTOSET
+					| MUSB_TXCSR_DMAMODE
+					| MUSB_TXCSR_DMAENAB);
+			csr |= MUSB_TXCSR_MODE;
+			musb_writew(epio, MUSB_TXCSR,
+				csr | MUSB_TXCSR_MODE);
+
+			dma_channel->actual_len = 0L;
+			qh->segsize = len;
+
+			/* TX uses "rndis" mode automatically, but needs help
+			 * to identify the zero-length-final-packet case.
+			 */
+			dma_ok = dma_controller->channel_program(
+					dma_channel, packet_sz,
+					(urb->transfer_flags
+							& URB_ZERO_PACKET)
+						== URB_ZERO_PACKET,
+					urb->transfer_dma,
+					qh->segsize);
+			if (dma_ok) {
+				load_count = 0;
+			} else {
+				dma_controller->channel_release(dma_channel);
+				hw_ep->tx_channel = NULL;
+				dma_channel = NULL;
+
+				/* REVISIT there's an error path here that
+				 * needs handling:  can't do dma, but
+				 * there's no pio buffer address...
+				 */
+			}
+		}
+
+		if (load_count) {
+			/* ASSERT:  TXCSR_DMAENAB was already cleared */
+
+			/* PIO to load FIFO */
+			qh->segsize = load_count;
+			musb_write_fifo(hw_ep, load_count, buf);
+			csr = musb_readw(epio, MUSB_TXCSR);
+			csr &= ~(MUSB_TXCSR_DMAENAB
+				| MUSB_TXCSR_DMAMODE
+				| MUSB_TXCSR_AUTOSET);
+			/* write CSR */
+			csr |= MUSB_TXCSR_MODE;
+
+			if (epnum)
+				musb_writew(epio, MUSB_TXCSR, csr);
+		}
+
+		/* re-enable interrupt */
+		musb_writew(mbase, MUSB_INTRTXE, int_txe);
+
+	/* IN/receive */
+	} else {
+		u16	csr;
+
+		if (hw_ep->rx_reinit) {
+			musb_rx_reinit(musb, qh, hw_ep);
+
+			/* init new state: toggle and NYET, maybe DMA later */
+			if (usb_gettoggle(urb->dev, qh->epnum, 0))
+				csr = MUSB_RXCSR_H_WR_DATATOGGLE
+					| MUSB_RXCSR_H_DATATOGGLE;
+			else
+				csr = 0;
+			if (qh->type == USB_ENDPOINT_XFER_INT)
+				csr |= MUSB_RXCSR_DISNYET;
+
+		} else {
+			csr = musb_readw(hw_ep->regs, MUSB_RXCSR);
+
+			if (csr & (MUSB_RXCSR_RXPKTRDY
+					| MUSB_RXCSR_DMAENAB
+					| MUSB_RXCSR_H_REQPKT))
+				ERR("broken !rx_reinit, ep%d csr %04x\n",
+						hw_ep->epnum, csr);
+
+			/* scrub any stale state, leaving toggle alone */
+			csr &= MUSB_RXCSR_DISNYET;
+		}
+
+		/* kick things off */
+
+		if ((is_cppi_enabled() || tusb_dma_omap()) && dma_channel) {
+			/* candidate for DMA */
+			if (dma_channel) {
+				dma_channel->actual_len = 0L;
+				qh->segsize = len;
+
+				/* AUTOREQ is in a DMA register */
+				musb_writew(hw_ep->regs, MUSB_RXCSR, csr);
+				csr = musb_readw(hw_ep->regs,
+						MUSB_RXCSR);
+
+				/* unless caller treats short rx transfers as
+				 * errors, we dare not queue multiple transfers.
+				 */
+				dma_ok = dma_controller->channel_program(
+						dma_channel, packet_sz,
+						!(urb->transfer_flags
+							& URB_SHORT_NOT_OK),
+						urb->transfer_dma,
+						qh->segsize);
+				if (!dma_ok) {
+					dma_controller->channel_release(
+							dma_channel);
+					hw_ep->rx_channel = NULL;
+					dma_channel = NULL;
+				} else
+					csr |= MUSB_RXCSR_DMAENAB;
+			}
+		}
+
+		csr |= MUSB_RXCSR_H_REQPKT;
+		DBG(7, "RXCSR%d := %04x\n", epnum, csr);
+		musb_writew(hw_ep->regs, MUSB_RXCSR, csr);
+		csr = musb_readw(hw_ep->regs, MUSB_RXCSR);
+	}
+}
+
+
+/*
+ * Service the default endpoint (ep0) as host.
+ * Return true until it's time to start the status stage.
+ */
+static bool musb_h_ep0_continue(struct musb *musb, u16 len, struct urb *urb)
+{
+	bool			 more = false;
+	u8			*fifo_dest = NULL;
+	u16			fifo_count = 0;
+	struct musb_hw_ep	*hw_ep = musb->control_ep;
+	struct musb_qh		*qh = hw_ep->in_qh;
+	struct usb_ctrlrequest	*request;
+
+	switch (musb->ep0_stage) {
+	case MUSB_EP0_IN:
+		fifo_dest = urb->transfer_buffer + urb->actual_length;
+		fifo_count = min(len, ((u16) (urb->transfer_buffer_length
+					- urb->actual_length)));
+		if (fifo_count < len)
+			urb->status = -EOVERFLOW;
+
+		musb_read_fifo(hw_ep, fifo_count, fifo_dest);
+
+		urb->actual_length += fifo_count;
+		if (len < qh->maxpacket) {
+			/* always terminate on short read; it's
+			 * rarely reported as an error.
+			 */
+		} else if (urb->actual_length <
+				urb->transfer_buffer_length)
+			more = true;
+		break;
+	case MUSB_EP0_START:
+		request = (struct usb_ctrlrequest *) urb->setup_packet;
+
+		if (!request->wLength) {
+			DBG(4, "start no-DATA\n");
+			break;
+		} else if (request->bRequestType & USB_DIR_IN) {
+			DBG(4, "start IN-DATA\n");
+			musb->ep0_stage = MUSB_EP0_IN;
+			more = true;
+			break;
+		} else {
+			DBG(4, "start OUT-DATA\n");
+			musb->ep0_stage = MUSB_EP0_OUT;
+			more = true;
+		}
+		/* FALLTHROUGH */
+	case MUSB_EP0_OUT:
+		fifo_count = min(qh->maxpacket, ((u16)
+				(urb->transfer_buffer_length
+				- urb->actual_length)));
+
+		if (fifo_count) {
+			fifo_dest = (u8 *) (urb->transfer_buffer
+					+ urb->actual_length);
+			DBG(3, "Sending %d bytes to %p\n",
+					fifo_count, fifo_dest);
+			musb_write_fifo(hw_ep, fifo_count, fifo_dest);
+
+			urb->actual_length += fifo_count;
+			more = true;
+		}
+		break;
+	default:
+		ERR("bogus ep0 stage %d\n", musb->ep0_stage);
+		break;
+	}
+
+	return more;
+}
+
+/*
+ * Handle default endpoint interrupt as host. Only called in IRQ time
+ * from the LinuxIsr() interrupt service routine.
+ *
+ * called with controller irqlocked
+ */
+irqreturn_t musb_h_ep0_irq(struct musb *musb)
+{
+	struct urb		*urb;
+	u16			csr, len;
+	int			status = 0;
+	void __iomem		*mbase = musb->mregs;
+	struct musb_hw_ep	*hw_ep = musb->control_ep;
+	void __iomem		*epio = hw_ep->regs;
+	struct musb_qh		*qh = hw_ep->in_qh;
+	bool			complete = false;
+	irqreturn_t		retval = IRQ_NONE;
+
+	/* ep0 only has one queue, "in" */
+	urb = next_urb(qh);
+
+	musb_ep_select(mbase, 0);
+	csr = musb_readw(epio, MUSB_CSR0);
+	len = (csr & MUSB_CSR0_RXPKTRDY)
+			? musb_readb(epio, MUSB_COUNT0)
+			: 0;
+
+	DBG(4, "<== csr0 %04x, qh %p, count %d, urb %p, stage %d\n",
+		csr, qh, len, urb, musb->ep0_stage);
+
+	/* if we just did status stage, we are done */
+	if (MUSB_EP0_STATUS == musb->ep0_stage) {
+		retval = IRQ_HANDLED;
+		complete = true;
+	}
+
+	/* prepare status */
+	if (csr & MUSB_CSR0_H_RXSTALL) {
+		DBG(6, "STALLING ENDPOINT\n");
+		status = -EPIPE;
+
+	} else if (csr & MUSB_CSR0_H_ERROR) {
+		DBG(2, "no response, csr0 %04x\n", csr);
+		status = -EPROTO;
+
+	} else if (csr & MUSB_CSR0_H_NAKTIMEOUT) {
+		DBG(2, "control NAK timeout\n");
+
+		/* NOTE:  this code path would be a good place to PAUSE a
+		 * control transfer, if another one is queued, so that
+		 * ep0 is more likely to stay busy.
+		 *
+		 * if (qh->ring.next != &musb->control), then
+		 * we have a candidate... NAKing is *NOT* an error
+		 */
+		musb_writew(epio, MUSB_CSR0, 0);
+		retval = IRQ_HANDLED;
+	}
+
+	if (status) {
+		DBG(6, "aborting\n");
+		retval = IRQ_HANDLED;
+		if (urb)
+			urb->status = status;
+		complete = true;
+
+		/* use the proper sequence to abort the transfer */
+		if (csr & MUSB_CSR0_H_REQPKT) {
+			csr &= ~MUSB_CSR0_H_REQPKT;
+			musb_writew(epio, MUSB_CSR0, csr);
+			csr &= ~MUSB_CSR0_H_NAKTIMEOUT;
+			musb_writew(epio, MUSB_CSR0, csr);
+		} else {
+			csr |= MUSB_CSR0_FLUSHFIFO;
+			musb_writew(epio, MUSB_CSR0, csr);
+			musb_writew(epio, MUSB_CSR0, csr);
+			csr &= ~MUSB_CSR0_H_NAKTIMEOUT;
+			musb_writew(epio, MUSB_CSR0, csr);
+		}
+
+		musb_writeb(epio, MUSB_NAKLIMIT0, 0);
+
+		/* clear it */
+		musb_writew(epio, MUSB_CSR0, 0);
+	}
+
+	if (unlikely(!urb)) {
+		/* stop endpoint since we have no place for its data, this
+		 * SHOULD NEVER HAPPEN! */
+		ERR("no URB for end 0\n");
+
+		musb_writew(epio, MUSB_CSR0, MUSB_CSR0_FLUSHFIFO);
+		musb_writew(epio, MUSB_CSR0, MUSB_CSR0_FLUSHFIFO);
+		musb_writew(epio, MUSB_CSR0, 0);
+
+		goto done;
+	}
+
+	if (!complete) {
+		/* call common logic and prepare response */
+		if (musb_h_ep0_continue(musb, len, urb)) {
+			/* more packets required */
+			csr = (MUSB_EP0_IN == musb->ep0_stage)
+				?  MUSB_CSR0_H_REQPKT : MUSB_CSR0_TXPKTRDY;
+		} else {
+			/* data transfer complete; perform status phase */
+			if (usb_pipeout(urb->pipe)
+					|| !urb->transfer_buffer_length)
+				csr = MUSB_CSR0_H_STATUSPKT
+					| MUSB_CSR0_H_REQPKT;
+			else
+				csr = MUSB_CSR0_H_STATUSPKT
+					| MUSB_CSR0_TXPKTRDY;
+
+			/* flag status stage */
+			musb->ep0_stage = MUSB_EP0_STATUS;
+
+			DBG(5, "ep0 STATUS, csr %04x\n", csr);
+
+		}
+		musb_writew(epio, MUSB_CSR0, csr);
+		retval = IRQ_HANDLED;
+	} else
+		musb->ep0_stage = MUSB_EP0_IDLE;
+
+	/* call completion handler if done */
+	if (complete)
+		musb_advance_schedule(musb, urb, hw_ep, 1);
+done:
+	return retval;
+}
+
+
+#ifdef CONFIG_USB_INVENTRA_DMA
+
+/* Host side TX (OUT) using Mentor DMA works as follows:
+	submit_urb ->
+		- if queue was empty, Program Endpoint
+		- ... which starts DMA to fifo in mode 1 or 0
+
+	DMA Isr (transfer complete) -> TxAvail()
+		- Stop DMA (~DmaEnab)	(<--- Alert ... currently happens
+					only in musb_cleanup_urb)
+		- TxPktRdy has to be set in mode 0 or for
+			short packets in mode 1.
+*/
+
+#endif
+
+/* Service a Tx-Available or dma completion irq for the endpoint */
+void musb_host_tx(struct musb *musb, u8 epnum)
+{
+	int			pipe;
+	bool			done = false;
+	u16			tx_csr;
+	size_t			wLength = 0;
+	u8			*buf = NULL;
+	struct urb		*urb;
+	struct musb_hw_ep	*hw_ep = musb->endpoints + epnum;
+	void __iomem		*epio = hw_ep->regs;
+	struct musb_qh		*qh = hw_ep->out_qh;
+	u32			status = 0;
+	void __iomem		*mbase = musb->mregs;
+	struct dma_channel	*dma;
+
+	urb = next_urb(qh);
+
+	musb_ep_select(mbase, epnum);
+	tx_csr = musb_readw(epio, MUSB_TXCSR);
+
+	/* with CPPI, DMA sometimes triggers "extra" irqs */
+	if (!urb) {
+		DBG(4, "extra TX%d ready, csr %04x\n", epnum, tx_csr);
+		goto finish;
+	}
+
+	pipe = urb->pipe;
+	dma = is_dma_capable() ? hw_ep->tx_channel : NULL;
+	DBG(4, "OUT/TX%d end, csr %04x%s\n", epnum, tx_csr,
+			dma ? ", dma" : "");
+
+	/* check for errors */
+	if (tx_csr & MUSB_TXCSR_H_RXSTALL) {
+		/* dma was disabled, fifo flushed */
+		DBG(3, "TX end %d stall\n", epnum);
+
+		/* stall; record URB status */
+		status = -EPIPE;
+
+	} else if (tx_csr & MUSB_TXCSR_H_ERROR) {
+		/* (NON-ISO) dma was disabled, fifo flushed */
+		DBG(3, "TX 3strikes on ep=%d\n", epnum);
+
+		status = -ETIMEDOUT;
+
+	} else if (tx_csr & MUSB_TXCSR_H_NAKTIMEOUT) {
+		DBG(6, "TX end=%d device not responding\n", epnum);
+
+		/* NOTE:  this code path would be a good place to PAUSE a
+		 * transfer, if there's some other (nonperiodic) tx urb
+		 * that could use this fifo.  (dma complicates it...)
+		 *
+		 * if (bulk && qh->ring.next != &musb->out_bulk), then
+		 * we have a candidate... NAKing is *NOT* an error
+		 */
+		musb_ep_select(mbase, epnum);
+		musb_writew(epio, MUSB_TXCSR,
+				MUSB_TXCSR_H_WZC_BITS
+				| MUSB_TXCSR_TXPKTRDY);
+		goto finish;
+	}
+
+	if (status) {
+		if (dma_channel_status(dma) == MUSB_DMA_STATUS_BUSY) {
+			dma->status = MUSB_DMA_STATUS_CORE_ABORT;
+			(void) musb->dma_controller->channel_abort(dma);
+		}
+
+		/* do the proper sequence to abort the transfer in the
+		 * usb core; the dma engine should already be stopped.
+		 */
+		musb_h_tx_flush_fifo(hw_ep);
+		tx_csr &= ~(MUSB_TXCSR_AUTOSET
+				| MUSB_TXCSR_DMAENAB
+				| MUSB_TXCSR_H_ERROR
+				| MUSB_TXCSR_H_RXSTALL
+				| MUSB_TXCSR_H_NAKTIMEOUT
+				);
+
+		musb_ep_select(mbase, epnum);
+		musb_writew(epio, MUSB_TXCSR, tx_csr);
+		/* REVISIT may need to clear FLUSHFIFO ... */
+		musb_writew(epio, MUSB_TXCSR, tx_csr);
+		musb_writeb(epio, MUSB_TXINTERVAL, 0);
+
+		done = true;
+	}
+
+	/* second cppi case */
+	if (dma_channel_status(dma) == MUSB_DMA_STATUS_BUSY) {
+		DBG(4, "extra TX%d ready, csr %04x\n", epnum, tx_csr);
+		goto finish;
+
+	}
+
+	/* REVISIT this looks wrong... */
+	if (!status || dma || usb_pipeisoc(pipe)) {
+		if (dma)
+			wLength = dma->actual_len;
+		else
+			wLength = qh->segsize;
+		qh->offset += wLength;
+
+		if (usb_pipeisoc(pipe)) {
+			struct usb_iso_packet_descriptor	*d;
+
+			d = urb->iso_frame_desc + qh->iso_idx;
+			d->actual_length = qh->segsize;
+			if (++qh->iso_idx >= urb->number_of_packets) {
+				done = true;
+			} else {
+				d++;
+				buf = urb->transfer_buffer + d->offset;
+				wLength = d->length;
+			}
+		} else if (dma) {
+			done = true;
+		} else {
+			/* see if we need to send more data, or ZLP */
+			if (qh->segsize < qh->maxpacket)
+				done = true;
+			else if (qh->offset == urb->transfer_buffer_length
+					&& !(urb->transfer_flags
+						& URB_ZERO_PACKET))
+				done = true;
+			if (!done) {
+				buf = urb->transfer_buffer
+						+ qh->offset;
+				wLength = urb->transfer_buffer_length
+						- qh->offset;
+			}
+		}
+	}
+
+	/* urb->status != -EINPROGRESS means request has been faulted,
+	 * so we must abort this transfer after cleanup
+	 */
+	if (urb->status != -EINPROGRESS) {
+		done = true;
+		if (status == 0)
+			status = urb->status;
+	}
+
+	if (done) {
+		/* set status */
+		urb->status = status;
+		urb->actual_length = qh->offset;
+		musb_advance_schedule(musb, urb, hw_ep, USB_DIR_OUT);
+
+	} else if (!(tx_csr & MUSB_TXCSR_DMAENAB)) {
+		/* WARN_ON(!buf); */
+
+		/* REVISIT:  some docs say that when hw_ep->tx_double_buffered,
+		 * (and presumably, fifo is not half-full) we should write TWO
+		 * packets before updating TXCSR ... other docs disagree ...
+		 */
+		/* PIO:  start next packet in this URB */
+		wLength = min(qh->maxpacket, (u16) wLength);
+		musb_write_fifo(hw_ep, wLength, buf);
+		qh->segsize = wLength;
+
+		musb_ep_select(mbase, epnum);
+		musb_writew(epio, MUSB_TXCSR,
+				MUSB_TXCSR_H_WZC_BITS | MUSB_TXCSR_TXPKTRDY);
+	} else
+		DBG(1, "not complete, but dma enabled?\n");
+
+finish:
+	return;
+}
+
+
+#ifdef CONFIG_USB_INVENTRA_DMA
+
+/* Host side RX (IN) using Mentor DMA works as follows:
+	submit_urb ->
+		- if queue was empty, ProgramEndpoint
+		- first IN token is sent out (by setting ReqPkt)
+	LinuxIsr -> RxReady()
+	/\	=> first packet is received
+	|	- Set in mode 0 (DmaEnab, ~ReqPkt)
+	|		-> DMA Isr (transfer complete) -> RxReady()
+	|		    - Ack receive (~RxPktRdy), turn off DMA (~DmaEnab)
+	|		    - if urb not complete, send next IN token (ReqPkt)
+	|			   |		else complete urb.
+	|			   |
+	---------------------------
+ *
+ * Nuances of mode 1:
+ *	For short packets, no ack (+RxPktRdy) is sent automatically
+ *	(even if AutoClear is ON)
+ *	For full packets, ack (~RxPktRdy) and next IN token (+ReqPkt) is sent
+ *	automatically => major problem, as collecting the next packet becomes
+ *	difficult. Hence mode 1 is not used.
+ *
+ * REVISIT
+ *	All we care about at this driver level is that
+ *       (a) all URBs terminate with REQPKT cleared and fifo(s) empty;
+ *       (b) termination conditions are: short RX, or buffer full;
+ *       (c) fault modes include
+ *           - iff URB_SHORT_NOT_OK, short RX status is -EREMOTEIO.
+ *             (and that endpoint's dma queue stops immediately)
+ *           - overflow (full, PLUS more bytes in the terminal packet)
+ *
+ *	So for example, usb-storage sets URB_SHORT_NOT_OK, and would
+ *	thus be a great candidate for using mode 1 ... for all but the
+ *	last packet of one URB's transfer.
+ */
+
+#endif
+
+/*
+ * Service an RX interrupt for the given IN endpoint; docs cover bulk, iso,
+ * and high-bandwidth IN transfer cases.
+ */
+void musb_host_rx(struct musb *musb, u8 epnum)
+{
+	struct urb		*urb;
+	struct musb_hw_ep	*hw_ep = musb->endpoints + epnum;
+	void __iomem		*epio = hw_ep->regs;
+	struct musb_qh		*qh = hw_ep->in_qh;
+	size_t			xfer_len;
+	void __iomem		*mbase = musb->mregs;
+	int			pipe;
+	u16			rx_csr, val;
+	bool			iso_err = false;
+	bool			done = false;
+	u32			status;
+	struct dma_channel	*dma;
+
+	musb_ep_select(mbase, epnum);
+
+	urb = next_urb(qh);
+	dma = is_dma_capable() ? hw_ep->rx_channel : NULL;
+	status = 0;
+	xfer_len = 0;
+
+	rx_csr = musb_readw(epio, MUSB_RXCSR);
+	val = rx_csr;
+
+	if (unlikely(!urb)) {
+		/* REVISIT -- THIS SHOULD NEVER HAPPEN ... but, at least
+		 * usbtest #11 (unlinks) triggers it regularly, sometimes
+		 * with fifo full.  (Only with DMA??)
+		 */
+		DBG(3, "BOGUS RX%d ready, csr %04x, count %d\n", epnum, val,
+			musb_readw(epio, MUSB_RXCOUNT));
+		musb_h_flush_rxfifo(hw_ep, MUSB_RXCSR_CLRDATATOG);
+		return;
+	}
+
+	pipe = urb->pipe;
+
+	DBG(5, "<== hw %d rxcsr %04x, urb actual %d (+dma %zu)\n",
+		epnum, rx_csr, urb->actual_length,
+		dma ? dma->actual_len : 0);
+
+	/* check for errors, concurrent stall & unlink is not really
+	 * handled yet! */
+	if (rx_csr & MUSB_RXCSR_H_RXSTALL) {
+		DBG(3, "RX end %d STALL\n", epnum);
+
+		/* stall; record URB status */
+		status = -EPIPE;
+
+	} else if (rx_csr & MUSB_RXCSR_H_ERROR) {
+		DBG(3, "end %d RX proto error\n", epnum);
+
+		status = -EPROTO;
+		musb_writeb(epio, MUSB_RXINTERVAL, 0);
+
+	} else if (rx_csr & MUSB_RXCSR_DATAERROR) {
+
+		if (USB_ENDPOINT_XFER_ISOC != qh->type) {
+			/* NOTE this code path would be a good place to PAUSE a
+			 * transfer, if there's some other (nonperiodic) rx urb
+			 * that could use this fifo.  (dma complicates it...)
+			 *
+			 * if (bulk && qh->ring.next != &musb->in_bulk), then
+			 * we have a candidate... NAKing is *NOT* an error
+			 */
+			DBG(6, "RX end %d NAK timeout\n", epnum);
+			musb_ep_select(mbase, epnum);
+			musb_writew(epio, MUSB_RXCSR,
+					MUSB_RXCSR_H_WZC_BITS
+					| MUSB_RXCSR_H_REQPKT);
+
+			goto finish;
+		} else {
+			DBG(4, "RX end %d ISO data error\n", epnum);
+			/* packet error reported later */
+			iso_err = true;
+		}
+	}
+
+	/* faults abort the transfer */
+	if (status) {
+		/* clean up dma and collect transfer count */
+		if (dma_channel_status(dma) == MUSB_DMA_STATUS_BUSY) {
+			dma->status = MUSB_DMA_STATUS_CORE_ABORT;
+			(void) musb->dma_controller->channel_abort(dma);
+			xfer_len = dma->actual_len;
+		}
+		musb_h_flush_rxfifo(hw_ep, MUSB_RXCSR_CLRDATATOG);
+		musb_writeb(epio, MUSB_RXINTERVAL, 0);
+		done = true;
+		goto finish;
+	}
+
+	if (unlikely(dma_channel_status(dma) == MUSB_DMA_STATUS_BUSY)) {
+		/* SHOULD NEVER HAPPEN ... but at least DaVinci has done it */
+		ERR("RX%d dma busy, csr %04x\n", epnum, rx_csr);
+		goto finish;
+	}
+
+	/* thorough shutdown for now ... given more precise fault handling
+	 * and better queueing support, we might keep a DMA pipeline going
+	 * while processing this irq for earlier completions.
+	 */
+
+	/* FIXME this is _way_ too much in-line logic for Mentor DMA */
+
+#ifndef CONFIG_USB_INVENTRA_DMA
+	if (rx_csr & MUSB_RXCSR_H_REQPKT)  {
+		/* REVISIT this happened for a while on some short reads...
+		 * the cleanup still needs investigation... looks bad...
+		 * and also duplicates dma cleanup code above ... plus,
+		 * shouldn't this be the "half full" double buffer case?
+		 */
+		if (dma_channel_status(dma) == MUSB_DMA_STATUS_BUSY) {
+			dma->status = MUSB_DMA_STATUS_CORE_ABORT;
+			(void) musb->dma_controller->channel_abort(dma);
+			xfer_len = dma->actual_len;
+			done = true;
+		}
+
+		DBG(2, "RXCSR%d %04x, reqpkt, len %zu%s\n", epnum, rx_csr,
+				xfer_len, dma ? ", dma" : "");
+		rx_csr &= ~MUSB_RXCSR_H_REQPKT;
+
+		musb_ep_select(mbase, epnum);
+		musb_writew(epio, MUSB_RXCSR,
+				MUSB_RXCSR_H_WZC_BITS | rx_csr);
+	}
+#endif
+	if (dma && (rx_csr & MUSB_RXCSR_DMAENAB)) {
+		xfer_len = dma->actual_len;
+
+		val &= ~(MUSB_RXCSR_DMAENAB
+			| MUSB_RXCSR_H_AUTOREQ
+			| MUSB_RXCSR_AUTOCLEAR
+			| MUSB_RXCSR_RXPKTRDY);
+		musb_writew(hw_ep->regs, MUSB_RXCSR, val);
+
+#ifdef CONFIG_USB_INVENTRA_DMA
+		/* done if urb buffer is full or short packet is recd */
+		done = (urb->actual_length + xfer_len >=
+				urb->transfer_buffer_length
+			|| dma->actual_len < qh->maxpacket);
+
+		/* send IN token for next packet, without AUTOREQ */
+		if (!done) {
+			val |= MUSB_RXCSR_H_REQPKT;
+			musb_writew(epio, MUSB_RXCSR,
+				MUSB_RXCSR_H_WZC_BITS | val);
+		}
+
+		DBG(4, "ep %d dma %s, rxcsr %04x, rxcount %d\n", epnum,
+			done ? "off" : "reset",
+			musb_readw(epio, MUSB_RXCSR),
+			musb_readw(epio, MUSB_RXCOUNT));
+#else
+		done = true;
+#endif
+	} else if (urb->status == -EINPROGRESS) {
+		/* if no errors, be sure a packet is ready for unloading */
+		if (unlikely(!(rx_csr & MUSB_RXCSR_RXPKTRDY))) {
+			status = -EPROTO;
+			ERR("Rx interrupt with no errors or packet!\n");
+
+			/* FIXME this is another "SHOULD NEVER HAPPEN" */
+
+/* SCRUB (RX) */
+			/* do the proper sequence to abort the transfer */
+			musb_ep_select(mbase, epnum);
+			val &= ~MUSB_RXCSR_H_REQPKT;
+			musb_writew(epio, MUSB_RXCSR, val);
+			goto finish;
+		}
+
+		/* we are expecting IN packets */
+#ifdef CONFIG_USB_INVENTRA_DMA
+		if (dma) {
+			struct dma_controller	*c;
+			u16			rx_count;
+			int			ret;
+
+			rx_count = musb_readw(epio, MUSB_RXCOUNT);
+
+			DBG(2, "RX%d count %d, buffer 0x%x len %d/%d\n",
+					epnum, rx_count,
+					urb->transfer_dma
+						+ urb->actual_length,
+					qh->offset,
+					urb->transfer_buffer_length);
+
+			c = musb->dma_controller;
+
+			dma->desired_mode = 0;
+#ifdef USE_MODE1
+			/* because of the issue below, mode 1 will
+			 * only rarely behave with correct semantics.
+			 */
+			if ((urb->transfer_flags &
+						URB_SHORT_NOT_OK)
+				&& (urb->transfer_buffer_length -
+						urb->actual_length)
+					> qh->maxpacket)
+				dma->desired_mode = 1;
+#endif
+
+/* Disadvantage of using mode 1:
+ *	It's basically usable only for mass storage class; essentially all
+ *	other protocols also terminate transfers on short packets.
+ *
+ * Details:
+ *	An extra IN token is sent at the end of the transfer (due to AUTOREQ)
+ *	If you try to use mode 1 for (transfer_buffer_length - 512), and try
+ *	to use the extra IN token to grab the last packet using mode 0, then
+ *	the problem is that you cannot be sure when the device will send the
+ *	last packet and RxPktRdy set. Sometimes the packet is recd too soon
+ *	such that it gets lost when RxCSR is re-set at the end of the mode 1
+ *	transfer, while sometimes it is recd just a little late so that if you
+ *	try to configure for mode 0 soon after the mode 1 transfer is
+ *	completed, you will find rxcount 0. Okay, so you might think why not
+ *	wait for an interrupt when the pkt is recd. Well, you won't get any!
+ */
+
+			val = musb_readw(epio, MUSB_RXCSR);
+			val &= ~MUSB_RXCSR_H_REQPKT;
+
+			if (dma->desired_mode == 0)
+				val &= ~MUSB_RXCSR_H_AUTOREQ;
+			else
+				val |= MUSB_RXCSR_H_AUTOREQ;
+			val |= MUSB_RXCSR_AUTOCLEAR | MUSB_RXCSR_DMAENAB;
+
+			musb_writew(epio, MUSB_RXCSR,
+				MUSB_RXCSR_H_WZC_BITS | val);
+
+			/* REVISIT if when actual_length != 0,
+			 * transfer_buffer_length needs to be
+			 * adjusted first...
+			 */
+			ret = c->channel_program(
+				dma, qh->maxpacket,
+				dma->desired_mode,
+				urb->transfer_dma
+					+ urb->actual_length,
+				(dma->desired_mode == 0)
+					? rx_count
+					: urb->transfer_buffer_length);
+
+			if (!ret) {
+				c->channel_release(dma);
+				hw_ep->rx_channel = NULL;
+				dma = NULL;
+				/* REVISIT reset CSR */
+			}
+		}
+#endif	/* Mentor DMA */
+
+		if (!dma) {
+			done = musb_host_packet_rx(musb, urb,
+					epnum, iso_err);
+			DBG(6, "read %spacket\n", done ? "last " : "");
+		}
+	}
+
+	if (dma && usb_pipeisoc(pipe)) {
+		struct usb_iso_packet_descriptor	*d;
+		int					iso_stat = status;
+
+		d = urb->iso_frame_desc + qh->iso_idx;
+		d->actual_length += xfer_len;
+		if (iso_err) {
+			iso_stat = -EILSEQ;
+			urb->error_count++;
+		}
+		d->status = iso_stat;
+	}
+
+finish:
+	urb->actual_length += xfer_len;
+	qh->offset += xfer_len;
+	if (done) {
+		if (urb->status == -EINPROGRESS)
+			urb->status = status;
+		musb_advance_schedule(musb, urb, hw_ep, USB_DIR_IN);
+	}
+}
+
+/* schedule nodes correspond to peripheral endpoints, like an OHCI QH.
+ * the software schedule associates multiple such nodes with a given
+ * host side hardware endpoint + direction; scheduling may activate
+ * that hardware endpoint.
+ */
+static int musb_schedule(
+	struct musb		*musb,
+	struct musb_qh		*qh,
+	int			is_in)
+{
+	int			idle;
+	int			best_diff;
+	int			best_end, epnum;
+	struct musb_hw_ep	*hw_ep = NULL;
+	struct list_head	*head = NULL;
+
+	/* use fixed hardware for control and bulk */
+	switch (qh->type) {
+	case USB_ENDPOINT_XFER_CONTROL:
+		head = &musb->control;
+		hw_ep = musb->control_ep;
+		break;
+	case USB_ENDPOINT_XFER_BULK:
+		hw_ep = musb->bulk_ep;
+		if (is_in)
+			head = &musb->in_bulk;
+		else
+			head = &musb->out_bulk;
+		break;
+	}
+	if (head) {
+		idle = list_empty(head);
+		list_add_tail(&qh->ring, head);
+		goto success;
+	}
+
+	/* else, periodic transfers get muxed to other endpoints */
+
+	/* FIXME this doesn't consider direction, so it can only
+	 * work for one half of the endpoint hardware, and assumes
+	 * the previous cases handled all non-shared endpoints...
+	 */
+
+	/* we know this qh hasn't been scheduled, so all we need to do
+	 * is choose which hardware endpoint to put it on ...
+	 *
+	 * REVISIT what we really want here is a regular schedule tree
+	 * like e.g. OHCI uses, but for now musb->periodic is just an
+	 * array of the _single_ logical endpoint associated with a
+	 * given physical one (identity mapping logical->physical).
+	 *
+	 * that simplistic approach makes TT scheduling a lot simpler;
+	 * there is none, and thus none of its complexity...
+	 */
+	best_diff = 4096;
+	best_end = -1;
+
+	for (epnum = 1; epnum < musb->nr_endpoints; epnum++) {
+		int	diff;
+
+		if (musb->periodic[epnum])
+			continue;
+		hw_ep = &musb->endpoints[epnum];
+		if (hw_ep == musb->bulk_ep)
+			continue;
+
+		if (is_in)
+			diff = hw_ep->max_packet_sz_rx - qh->maxpacket;
+		else
+			diff = hw_ep->max_packet_sz_tx - qh->maxpacket;
+
+		if (diff > 0 && best_diff > diff) {
+			best_diff = diff;
+			best_end = epnum;
+		}
+	}
+	if (best_end < 0)
+		return -ENOSPC;
+
+	idle = 1;
+	hw_ep = musb->endpoints + best_end;
+	musb->periodic[best_end] = qh;
+	DBG(4, "qh %p periodic slot %d\n", qh, best_end);
+success:
+	qh->hw_ep = hw_ep;
+	qh->hep->hcpriv = qh;
+	if (idle)
+		musb_start_urb(musb, is_in, qh);
+	return 0;
+}
+
+static int musb_urb_enqueue(
+	struct usb_hcd			*hcd,
+	struct urb			*urb,
+	gfp_t				mem_flags)
+{
+	unsigned long			flags;
+	struct musb			*musb = hcd_to_musb(hcd);
+	struct usb_host_endpoint	*hep = urb->ep;
+	struct musb_qh			*qh = hep->hcpriv;
+	struct usb_endpoint_descriptor	*epd = &hep->desc;
+	int				ret;
+	unsigned			type_reg;
+	unsigned			interval;
+
+	/* host role must be active */
+	if (!is_host_active(musb) || !musb->is_active)
+		return -ENODEV;
+
+	spin_lock_irqsave(&musb->lock, flags);
+	ret = usb_hcd_link_urb_to_ep(hcd, urb);
+	spin_unlock_irqrestore(&musb->lock, flags);
+	if (ret)
+		return ret;
+
+	/* DMA mapping was already done, if needed, and this urb is on
+	 * hep->urb_list ... so there's little to do unless hep wasn't
+	 * yet scheduled onto a live qh.
+	 *
+	 * REVISIT best to keep hep->hcpriv valid until the endpoint gets
+	 * disabled, testing for empty qh->ring and avoiding qh setup costs
+	 * except for the first urb queued after a config change.
+	 */
+	if (qh) {
+		urb->hcpriv = qh;
+		return 0;
+	}
+
+	/* Allocate and initialize qh, minimizing the work done each time
+	 * hw_ep gets reprogrammed, or with irqs blocked.  Then schedule it.
+	 *
+	 * REVISIT consider a dedicated qh kmem_cache, so it's harder
+	 * for bugs in other kernel code to break this driver...
+	 */
+	qh = kzalloc(sizeof *qh, mem_flags);
+	if (!qh) {
+		usb_hcd_unlink_urb_from_ep(hcd, urb);
+		return -ENOMEM;
+	}
+
+	qh->hep = hep;
+	qh->dev = urb->dev;
+	INIT_LIST_HEAD(&qh->ring);
+	qh->is_ready = 1;
+
+	qh->maxpacket = le16_to_cpu(epd->wMaxPacketSize);
+
+	/* no high bandwidth support yet */
+	if (qh->maxpacket & ~0x7ff) {
+		ret = -EMSGSIZE;
+		goto done;
+	}
+
+	qh->epnum = epd->bEndpointAddress & USB_ENDPOINT_NUMBER_MASK;
+	qh->type = epd->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK;
+
+	/* NOTE: urb->dev->devnum is wrong during SET_ADDRESS */
+	qh->addr_reg = (u8) usb_pipedevice(urb->pipe);
+
+	/* precompute rxtype/txtype/type0 register */
+	type_reg = (qh->type << 4) | qh->epnum;
+	switch (urb->dev->speed) {
+	case USB_SPEED_LOW:
+		type_reg |= 0xc0;
+		break;
+	case USB_SPEED_FULL:
+		type_reg |= 0x80;
+		break;
+	default:
+		type_reg |= 0x40;
+	}
+	qh->type_reg = type_reg;
+
+	/* precompute rxinterval/txinterval register */
+	interval = min((u8)16, epd->bInterval);	/* log encoding */
+	switch (qh->type) {
+	case USB_ENDPOINT_XFER_INT:
+		/* fullspeed uses linear encoding */
+		if (USB_SPEED_FULL == urb->dev->speed) {
+			interval = epd->bInterval;
+			if (!interval)
+				interval = 1;
+		}
+		/* FALLTHROUGH */
+	case USB_ENDPOINT_XFER_ISOC:
+		/* iso always uses log encoding */
+		break;
+	default:
+		/* REVISIT we actually want to use NAK limits, hinting to the
+		 * transfer scheduling logic to try some other qh, e.g. try
+		 * for 2 msec first:
+		 *
+		 * interval = (USB_SPEED_HIGH == urb->dev->speed) ? 16 : 2;
+		 *
+		 * The downside of disabling this is that transfer scheduling
+		 * gets VERY unfair for nonperiodic transfers; a misbehaving
+		 * peripheral could make that hurt.  Or for reads, one that's
+		 * perfectly normal:  network and other drivers keep reads
+		 * posted at all times, having one pending for a week should
+		 * be perfectly safe.
+		 *
+		 * The upside of disabling it is avoidng transfer scheduling
+		 * code to put this aside for while.
+		 */
+		interval = 0;
+	}
+	qh->intv_reg = interval;
+
+	/* precompute addressing for external hub/tt ports */
+	if (musb->is_multipoint) {
+		struct usb_device	*parent = urb->dev->parent;
+
+		if (parent != hcd->self.root_hub) {
+			qh->h_addr_reg = (u8) parent->devnum;
+
+			/* set up tt info if needed */
+			if (urb->dev->tt) {
+				qh->h_port_reg = (u8) urb->dev->ttport;
+				qh->h_addr_reg |= 0x80;
+			}
+		}
+	}
+
+	/* invariant: hep->hcpriv is null OR the qh that's already scheduled.
+	 * until we get real dma queues (with an entry for each urb/buffer),
+	 * we only have work to do in the former case.
+	 */
+	spin_lock_irqsave(&musb->lock, flags);
+	if (hep->hcpriv) {
+		/* some concurrent activity submitted another urb to hep...
+		 * odd, rare, error prone, but legal.
+		 */
+		kfree(qh);
+		ret = 0;
+	} else
+		ret = musb_schedule(musb, qh,
+				epd->bEndpointAddress & USB_ENDPOINT_DIR_MASK);
+
+	if (ret == 0) {
+		urb->hcpriv = qh;
+		/* FIXME set urb->start_frame for iso/intr, it's tested in
+		 * musb_start_urb(), but otherwise only konicawc cares ...
+		 */
+	}
+	spin_unlock_irqrestore(&musb->lock, flags);
+
+done:
+	if (ret != 0) {
+		usb_hcd_unlink_urb_from_ep(hcd, urb);
+		kfree(qh);
+	}
+	return ret;
+}
+
+
+/*
+ * abort a transfer that's at the head of a hardware queue.
+ * called with controller locked, irqs blocked
+ * that hardware queue advances to the next transfer, unless prevented
+ */
+static int musb_cleanup_urb(struct urb *urb, struct musb_qh *qh, int is_in)
+{
+	struct musb_hw_ep	*ep = qh->hw_ep;
+	void __iomem		*epio = ep->regs;
+	unsigned		hw_end = ep->epnum;
+	void __iomem		*regs = ep->musb->mregs;
+	u16			csr;
+	int			status = 0;
+
+	musb_ep_select(regs, hw_end);
+
+	if (is_dma_capable()) {
+		struct dma_channel	*dma;
+
+		dma = is_in ? ep->rx_channel : ep->tx_channel;
+		if (dma) {
+			status = ep->musb->dma_controller->channel_abort(dma);
+			DBG(status ? 1 : 3,
+				"abort %cX%d DMA for urb %p --> %d\n",
+				is_in ? 'R' : 'T', ep->epnum,
+				urb, status);
+			urb->actual_length += dma->actual_len;
+		}
+	}
+
+	/* turn off DMA requests, discard state, stop polling ... */
+	if (is_in) {
+		/* giveback saves bulk toggle */
+		csr = musb_h_flush_rxfifo(ep, 0);
+
+		/* REVISIT we still get an irq; should likely clear the
+		 * endpoint's irq status here to avoid bogus irqs.
+		 * clearing that status is platform-specific...
+		 */
+	} else {
+		musb_h_tx_flush_fifo(ep);
+		csr = musb_readw(epio, MUSB_TXCSR);
+		csr &= ~(MUSB_TXCSR_AUTOSET
+			| MUSB_TXCSR_DMAENAB
+			| MUSB_TXCSR_H_RXSTALL
+			| MUSB_TXCSR_H_NAKTIMEOUT
+			| MUSB_TXCSR_H_ERROR
+			| MUSB_TXCSR_TXPKTRDY);
+		musb_writew(epio, MUSB_TXCSR, csr);
+		/* REVISIT may need to clear FLUSHFIFO ... */
+		musb_writew(epio, MUSB_TXCSR, csr);
+		/* flush cpu writebuffer */
+		csr = musb_readw(epio, MUSB_TXCSR);
+	}
+	if (status == 0)
+		musb_advance_schedule(ep->musb, urb, ep, is_in);
+	return status;
+}
+
+static int musb_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, int status)
+{
+	struct musb		*musb = hcd_to_musb(hcd);
+	struct musb_qh		*qh;
+	struct list_head	*sched;
+	unsigned long		flags;
+	int			ret;
+
+	DBG(4, "urb=%p, dev%d ep%d%s\n", urb,
+			usb_pipedevice(urb->pipe),
+			usb_pipeendpoint(urb->pipe),
+			usb_pipein(urb->pipe) ? "in" : "out");
+
+	spin_lock_irqsave(&musb->lock, flags);
+	ret = usb_hcd_check_unlink_urb(hcd, urb, status);
+	if (ret)
+		goto done;
+
+	qh = urb->hcpriv;
+	if (!qh)
+		goto done;
+
+	/* Any URB not actively programmed into endpoint hardware can be
+	 * immediately given back.  Such an URB must be at the head of its
+	 * endpoint queue, unless someday we get real DMA queues.  And even
+	 * then, it might not be known to the hardware...
+	 *
+	 * Otherwise abort current transfer, pending dma, etc.; urb->status
+	 * has already been updated.  This is a synchronous abort; it'd be
+	 * OK to hold off until after some IRQ, though.
+	 */
+	if (!qh->is_ready || urb->urb_list.prev != &qh->hep->urb_list)
+		ret = -EINPROGRESS;
+	else {
+		switch (qh->type) {
+		case USB_ENDPOINT_XFER_CONTROL:
+			sched = &musb->control;
+			break;
+		case USB_ENDPOINT_XFER_BULK:
+			if (usb_pipein(urb->pipe))
+				sched = &musb->in_bulk;
+			else
+				sched = &musb->out_bulk;
+			break;
+		default:
+			/* REVISIT when we get a schedule tree, periodic
+			 * transfers won't always be at the head of a
+			 * singleton queue...
+			 */
+			sched = NULL;
+			break;
+		}
+	}
+
+	/* NOTE:  qh is invalid unless !list_empty(&hep->urb_list) */
+	if (ret < 0 || (sched && qh != first_qh(sched))) {
+		int	ready = qh->is_ready;
+
+		ret = 0;
+		qh->is_ready = 0;
+		__musb_giveback(musb, urb, 0);
+		qh->is_ready = ready;
+	} else
+		ret = musb_cleanup_urb(urb, qh, urb->pipe & USB_DIR_IN);
+done:
+	spin_unlock_irqrestore(&musb->lock, flags);
+	return ret;
+}
+
+/* disable an endpoint */
+static void
+musb_h_disable(struct usb_hcd *hcd, struct usb_host_endpoint *hep)
+{
+	u8			epnum = hep->desc.bEndpointAddress;
+	unsigned long		flags;
+	struct musb		*musb = hcd_to_musb(hcd);
+	u8			is_in = epnum & USB_DIR_IN;
+	struct musb_qh		*qh = hep->hcpriv;
+	struct urb		*urb, *tmp;
+	struct list_head	*sched;
+
+	if (!qh)
+		return;
+
+	spin_lock_irqsave(&musb->lock, flags);
+
+	switch (qh->type) {
+	case USB_ENDPOINT_XFER_CONTROL:
+		sched = &musb->control;
+		break;
+	case USB_ENDPOINT_XFER_BULK:
+		if (is_in)
+			sched = &musb->in_bulk;
+		else
+			sched = &musb->out_bulk;
+		break;
+	default:
+		/* REVISIT when we get a schedule tree, periodic transfers
+		 * won't always be at the head of a singleton queue...
+		 */
+		sched = NULL;
+		break;
+	}
+
+	/* NOTE:  qh is invalid unless !list_empty(&hep->urb_list) */
+
+	/* kick first urb off the hardware, if needed */
+	qh->is_ready = 0;
+	if (!sched || qh == first_qh(sched)) {
+		urb = next_urb(qh);
+
+		/* make software (then hardware) stop ASAP */
+		if (!urb->unlinked)
+			urb->status = -ESHUTDOWN;
+
+		/* cleanup */
+		musb_cleanup_urb(urb, qh, urb->pipe & USB_DIR_IN);
+	} else
+		urb = NULL;
+
+	/* then just nuke all the others */
+	list_for_each_entry_safe_from(urb, tmp, &hep->urb_list, urb_list)
+		musb_giveback(qh, urb, -ESHUTDOWN);
+
+	spin_unlock_irqrestore(&musb->lock, flags);
+}
+
+static int musb_h_get_frame_number(struct usb_hcd *hcd)
+{
+	struct musb	*musb = hcd_to_musb(hcd);
+
+	return musb_readw(musb->mregs, MUSB_FRAME);
+}
+
+static int musb_h_start(struct usb_hcd *hcd)
+{
+	struct musb	*musb = hcd_to_musb(hcd);
+
+	/* NOTE: musb_start() is called when the hub driver turns
+	 * on port power, or when (OTG) peripheral starts.
+	 */
+	hcd->state = HC_STATE_RUNNING;
+	musb->port1_status = 0;
+	return 0;
+}
+
+static void musb_h_stop(struct usb_hcd *hcd)
+{
+	musb_stop(hcd_to_musb(hcd));
+	hcd->state = HC_STATE_HALT;
+}
+
+static int musb_bus_suspend(struct usb_hcd *hcd)
+{
+	struct musb	*musb = hcd_to_musb(hcd);
+
+	if (musb->xceiv.state == OTG_STATE_A_SUSPEND)
+		return 0;
+
+	if (is_host_active(musb) && musb->is_active) {
+		WARNING("trying to suspend as %s is_active=%i\n",
+			otg_state_string(musb), musb->is_active);
+		return -EBUSY;
+	} else
+		return 0;
+}
+
+static int musb_bus_resume(struct usb_hcd *hcd)
+{
+	/* resuming child port does the work */
+	return 0;
+}
+
+const struct hc_driver musb_hc_driver = {
+	.description		= "musb-hcd",
+	.product_desc		= "MUSB HDRC host driver",
+	.hcd_priv_size		= sizeof(struct musb),
+	.flags			= HCD_USB2 | HCD_MEMORY,
+
+	/* not using irq handler or reset hooks from usbcore, since
+	 * those must be shared with peripheral code for OTG configs
+	 */
+
+	.start			= musb_h_start,
+	.stop			= musb_h_stop,
+
+	.get_frame_number	= musb_h_get_frame_number,
+
+	.urb_enqueue		= musb_urb_enqueue,
+	.urb_dequeue		= musb_urb_dequeue,
+	.endpoint_disable	= musb_h_disable,
+
+	.hub_status_data	= musb_hub_status_data,
+	.hub_control		= musb_hub_control,
+	.bus_suspend		= musb_bus_suspend,
+	.bus_resume		= musb_bus_resume,
+	/* .start_port_reset	= NULL, */
+	/* .hub_irq_enable	= NULL, */
+};
diff --git a/drivers/usb/musb/musb_host.h b/drivers/usb/musb/musb_host.h
new file mode 100644
index 000000000000..77bcdb9d5b32
--- /dev/null
+++ b/drivers/usb/musb/musb_host.h
@@ -0,0 +1,110 @@
+/*
+ * MUSB OTG driver host defines
+ *
+ * Copyright 2005 Mentor Graphics Corporation
+ * Copyright (C) 2005-2006 by Texas Instruments
+ * Copyright (C) 2006-2007 Nokia Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ * THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
+ * NO EVENT SHALL THE AUTHORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ */
+
+#ifndef _MUSB_HOST_H
+#define _MUSB_HOST_H
+
+static inline struct usb_hcd *musb_to_hcd(struct musb *musb)
+{
+	return container_of((void *) musb, struct usb_hcd, hcd_priv);
+}
+
+static inline struct musb *hcd_to_musb(struct usb_hcd *hcd)
+{
+	return (struct musb *) (hcd->hcd_priv);
+}
+
+/* stored in "usb_host_endpoint.hcpriv" for scheduled endpoints */
+struct musb_qh {
+	struct usb_host_endpoint *hep;		/* usbcore info */
+	struct usb_device	*dev;
+	struct musb_hw_ep	*hw_ep;		/* current binding */
+
+	struct list_head	ring;		/* of musb_qh */
+	/* struct musb_qh		*next; */	/* for periodic tree */
+
+	unsigned		offset;		/* in urb->transfer_buffer */
+	unsigned		segsize;	/* current xfer fragment */
+
+	u8			type_reg;	/* {rx,tx} type register */
+	u8			intv_reg;	/* {rx,tx} interval register */
+	u8			addr_reg;	/* device address register */
+	u8			h_addr_reg;	/* hub address register */
+	u8			h_port_reg;	/* hub port register */
+
+	u8			is_ready;	/* safe to modify hw_ep */
+	u8			type;		/* XFERTYPE_* */
+	u8			epnum;
+	u16			maxpacket;
+	u16			frame;		/* for periodic schedule */
+	unsigned		iso_idx;	/* in urb->iso_frame_desc[] */
+};
+
+/* map from control or bulk queue head to the first qh on that ring */
+static inline struct musb_qh *first_qh(struct list_head *q)
+{
+	if (list_empty(q))
+		return NULL;
+	return list_entry(q->next, struct musb_qh, ring);
+}
+
+
+extern void musb_root_disconnect(struct musb *musb);
+
+struct usb_hcd;
+
+extern int musb_hub_status_data(struct usb_hcd *hcd, char *buf);
+extern int musb_hub_control(struct usb_hcd *hcd,
+			u16 typeReq, u16 wValue, u16 wIndex,
+			char *buf, u16 wLength);
+
+extern const struct hc_driver musb_hc_driver;
+
+static inline struct urb *next_urb(struct musb_qh *qh)
+{
+#ifdef CONFIG_USB_MUSB_HDRC_HCD
+	struct list_head	*queue;
+
+	if (!qh)
+		return NULL;
+	queue = &qh->hep->urb_list;
+	if (list_empty(queue))
+		return NULL;
+	return list_entry(queue->next, struct urb, urb_list);
+#else
+	return NULL;
+#endif
+}
+
+#endif				/* _MUSB_HOST_H */
diff --git a/drivers/usb/musb/musb_io.h b/drivers/usb/musb/musb_io.h
new file mode 100644
index 000000000000..6bbedae83af8
--- /dev/null
+++ b/drivers/usb/musb/musb_io.h
@@ -0,0 +1,115 @@
+/*
+ * MUSB OTG driver register I/O
+ *
+ * Copyright 2005 Mentor Graphics Corporation
+ * Copyright (C) 2005-2006 by Texas Instruments
+ * Copyright (C) 2006-2007 Nokia Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ * THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
+ * NO EVENT SHALL THE AUTHORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ */
+
+#ifndef __MUSB_LINUX_PLATFORM_ARCH_H__
+#define __MUSB_LINUX_PLATFORM_ARCH_H__
+
+#include <linux/io.h>
+
+#ifndef	CONFIG_ARM
+static inline void readsl(const void __iomem *addr, void *buf, int len)
+	{ insl((unsigned long)addr, buf, len); }
+static inline void readsw(const void __iomem *addr, void *buf, int len)
+	{ insw((unsigned long)addr, buf, len); }
+static inline void readsb(const void __iomem *addr, void *buf, int len)
+	{ insb((unsigned long)addr, buf, len); }
+
+static inline void writesl(const void __iomem *addr, const void *buf, int len)
+	{ outsl((unsigned long)addr, buf, len); }
+static inline void writesw(const void __iomem *addr, const void *buf, int len)
+	{ outsw((unsigned long)addr, buf, len); }
+static inline void writesb(const void __iomem *addr, const void *buf, int len)
+	{ outsb((unsigned long)addr, buf, len); }
+
+#endif
+
+/* NOTE:  these offsets are all in bytes */
+
+static inline u16 musb_readw(const void __iomem *addr, unsigned offset)
+	{ return __raw_readw(addr + offset); }
+
+static inline u32 musb_readl(const void __iomem *addr, unsigned offset)
+	{ return __raw_readl(addr + offset); }
+
+
+static inline void musb_writew(void __iomem *addr, unsigned offset, u16 data)
+	{ __raw_writew(data, addr + offset); }
+
+static inline void musb_writel(void __iomem *addr, unsigned offset, u32 data)
+	{ __raw_writel(data, addr + offset); }
+
+
+#ifdef CONFIG_USB_TUSB6010
+
+/*
+ * TUSB6010 doesn't allow 8-bit access; 16-bit access is the minimum.
+ */
+static inline u8 musb_readb(const void __iomem *addr, unsigned offset)
+{
+	u16 tmp;
+	u8 val;
+
+	tmp = __raw_readw(addr + (offset & ~1));
+	if (offset & 1)
+		val = (tmp >> 8);
+	else
+		val = tmp & 0xff;
+
+	return val;
+}
+
+static inline void musb_writeb(void __iomem *addr, unsigned offset, u8 data)
+{
+	u16 tmp;
+
+	tmp = __raw_readw(addr + (offset & ~1));
+	if (offset & 1)
+		tmp = (data << 8) | (tmp & 0xff);
+	else
+		tmp = (tmp & 0xff00) | data;
+
+	__raw_writew(tmp, addr + (offset & ~1));
+}
+
+#else
+
+static inline u8 musb_readb(const void __iomem *addr, unsigned offset)
+	{ return __raw_readb(addr + offset); }
+
+static inline void musb_writeb(void __iomem *addr, unsigned offset, u8 data)
+	{ __raw_writeb(data, addr + offset); }
+
+#endif	/* CONFIG_USB_TUSB6010 */
+
+#endif
diff --git a/drivers/usb/musb/musb_regs.h b/drivers/usb/musb/musb_regs.h
new file mode 100644
index 000000000000..9c228661aa5a
--- /dev/null
+++ b/drivers/usb/musb/musb_regs.h
@@ -0,0 +1,300 @@
+/*
+ * MUSB OTG driver register defines
+ *
+ * Copyright 2005 Mentor Graphics Corporation
+ * Copyright (C) 2005-2006 by Texas Instruments
+ * Copyright (C) 2006-2007 Nokia Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ * THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
+ * NO EVENT SHALL THE AUTHORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ */
+
+#ifndef __MUSB_REGS_H__
+#define __MUSB_REGS_H__
+
+#define MUSB_EP0_FIFOSIZE	64	/* This is non-configurable */
+
+/*
+ * Common USB registers
+ */
+
+#define MUSB_FADDR		0x00	/* 8-bit */
+#define MUSB_POWER		0x01	/* 8-bit */
+
+#define MUSB_INTRTX		0x02	/* 16-bit */
+#define MUSB_INTRRX		0x04
+#define MUSB_INTRTXE		0x06
+#define MUSB_INTRRXE		0x08
+#define MUSB_INTRUSB		0x0A	/* 8 bit */
+#define MUSB_INTRUSBE		0x0B	/* 8 bit */
+#define MUSB_FRAME		0x0C
+#define MUSB_INDEX		0x0E	/* 8 bit */
+#define MUSB_TESTMODE		0x0F	/* 8 bit */
+
+/* Get offset for a given FIFO from musb->mregs */
+#ifdef	CONFIG_USB_TUSB6010
+#define MUSB_FIFO_OFFSET(epnum)	(0x200 + ((epnum) * 0x20))
+#else
+#define MUSB_FIFO_OFFSET(epnum)	(0x20 + ((epnum) * 4))
+#endif
+
+/*
+ * Additional Control Registers
+ */
+
+#define MUSB_DEVCTL		0x60	/* 8 bit */
+
+/* These are always controlled through the INDEX register */
+#define MUSB_TXFIFOSZ		0x62	/* 8-bit (see masks) */
+#define MUSB_RXFIFOSZ		0x63	/* 8-bit (see masks) */
+#define MUSB_TXFIFOADD		0x64	/* 16-bit offset shifted right 3 */
+#define MUSB_RXFIFOADD		0x66	/* 16-bit offset shifted right 3 */
+
+/* REVISIT: vctrl/vstatus: optional vendor utmi+phy register at 0x68 */
+#define MUSB_HWVERS		0x6C	/* 8 bit */
+
+#define MUSB_EPINFO		0x78	/* 8 bit */
+#define MUSB_RAMINFO		0x79	/* 8 bit */
+#define MUSB_LINKINFO		0x7a	/* 8 bit */
+#define MUSB_VPLEN		0x7b	/* 8 bit */
+#define MUSB_HS_EOF1		0x7c	/* 8 bit */
+#define MUSB_FS_EOF1		0x7d	/* 8 bit */
+#define MUSB_LS_EOF1		0x7e	/* 8 bit */
+
+/* Offsets to endpoint registers */
+#define MUSB_TXMAXP		0x00
+#define MUSB_TXCSR		0x02
+#define MUSB_CSR0		MUSB_TXCSR	/* Re-used for EP0 */
+#define MUSB_RXMAXP		0x04
+#define MUSB_RXCSR		0x06
+#define MUSB_RXCOUNT		0x08
+#define MUSB_COUNT0		MUSB_RXCOUNT	/* Re-used for EP0 */
+#define MUSB_TXTYPE		0x0A
+#define MUSB_TYPE0		MUSB_TXTYPE	/* Re-used for EP0 */
+#define MUSB_TXINTERVAL		0x0B
+#define MUSB_NAKLIMIT0		MUSB_TXINTERVAL	/* Re-used for EP0 */
+#define MUSB_RXTYPE		0x0C
+#define MUSB_RXINTERVAL		0x0D
+#define MUSB_FIFOSIZE		0x0F
+#define MUSB_CONFIGDATA		MUSB_FIFOSIZE	/* Re-used for EP0 */
+
+/* Offsets to endpoint registers in indexed model (using INDEX register) */
+#define MUSB_INDEXED_OFFSET(_epnum, _offset)	\
+	(0x10 + (_offset))
+
+/* Offsets to endpoint registers in flat models */
+#define MUSB_FLAT_OFFSET(_epnum, _offset)	\
+	(0x100 + (0x10*(_epnum)) + (_offset))
+
+#ifdef CONFIG_USB_TUSB6010
+/* TUSB6010 EP0 configuration register is special */
+#define MUSB_TUSB_OFFSET(_epnum, _offset)	\
+	(0x10 + _offset)
+#include "tusb6010.h"		/* Needed "only" for TUSB_EP0_CONF */
+#endif
+
+/* "bus control"/target registers, for host side multipoint (external hubs) */
+#define MUSB_TXFUNCADDR		0x00
+#define MUSB_TXHUBADDR		0x02
+#define MUSB_TXHUBPORT		0x03
+
+#define MUSB_RXFUNCADDR		0x04
+#define MUSB_RXHUBADDR		0x06
+#define MUSB_RXHUBPORT		0x07
+
+#define MUSB_BUSCTL_OFFSET(_epnum, _offset) \
+	(0x80 + (8*(_epnum)) + (_offset))
+
+/*
+ * MUSB Register bits
+ */
+
+/* POWER */
+#define MUSB_POWER_ISOUPDATE	0x80
+#define MUSB_POWER_SOFTCONN	0x40
+#define MUSB_POWER_HSENAB	0x20
+#define MUSB_POWER_HSMODE	0x10
+#define MUSB_POWER_RESET	0x08
+#define MUSB_POWER_RESUME	0x04
+#define MUSB_POWER_SUSPENDM	0x02
+#define MUSB_POWER_ENSUSPEND	0x01
+
+/* INTRUSB */
+#define MUSB_INTR_SUSPEND	0x01
+#define MUSB_INTR_RESUME	0x02
+#define MUSB_INTR_RESET		0x04
+#define MUSB_INTR_BABBLE	0x04
+#define MUSB_INTR_SOF		0x08
+#define MUSB_INTR_CONNECT	0x10
+#define MUSB_INTR_DISCONNECT	0x20
+#define MUSB_INTR_SESSREQ	0x40
+#define MUSB_INTR_VBUSERROR	0x80	/* For SESSION end */
+
+/* DEVCTL */
+#define MUSB_DEVCTL_BDEVICE	0x80
+#define MUSB_DEVCTL_FSDEV	0x40
+#define MUSB_DEVCTL_LSDEV	0x20
+#define MUSB_DEVCTL_VBUS	0x18
+#define MUSB_DEVCTL_VBUS_SHIFT	3
+#define MUSB_DEVCTL_HM		0x04
+#define MUSB_DEVCTL_HR		0x02
+#define MUSB_DEVCTL_SESSION	0x01
+
+/* TESTMODE */
+#define MUSB_TEST_FORCE_HOST	0x80
+#define MUSB_TEST_FIFO_ACCESS	0x40
+#define MUSB_TEST_FORCE_FS	0x20
+#define MUSB_TEST_FORCE_HS	0x10
+#define MUSB_TEST_PACKET	0x08
+#define MUSB_TEST_K		0x04
+#define MUSB_TEST_J		0x02
+#define MUSB_TEST_SE0_NAK	0x01
+
+/* Allocate for double-packet buffering (effectively doubles assigned _SIZE) */
+#define MUSB_FIFOSZ_DPB	0x10
+/* Allocation size (8, 16, 32, ... 4096) */
+#define MUSB_FIFOSZ_SIZE	0x0f
+
+/* CSR0 */
+#define MUSB_CSR0_FLUSHFIFO	0x0100
+#define MUSB_CSR0_TXPKTRDY	0x0002
+#define MUSB_CSR0_RXPKTRDY	0x0001
+
+/* CSR0 in Peripheral mode */
+#define MUSB_CSR0_P_SVDSETUPEND	0x0080
+#define MUSB_CSR0_P_SVDRXPKTRDY	0x0040
+#define MUSB_CSR0_P_SENDSTALL	0x0020
+#define MUSB_CSR0_P_SETUPEND	0x0010
+#define MUSB_CSR0_P_DATAEND	0x0008
+#define MUSB_CSR0_P_SENTSTALL	0x0004
+
+/* CSR0 in Host mode */
+#define MUSB_CSR0_H_DIS_PING		0x0800
+#define MUSB_CSR0_H_WR_DATATOGGLE	0x0400	/* Set to allow setting: */
+#define MUSB_CSR0_H_DATATOGGLE		0x0200	/* Data toggle control */
+#define MUSB_CSR0_H_NAKTIMEOUT		0x0080
+#define MUSB_CSR0_H_STATUSPKT		0x0040
+#define MUSB_CSR0_H_REQPKT		0x0020
+#define MUSB_CSR0_H_ERROR		0x0010
+#define MUSB_CSR0_H_SETUPPKT		0x0008
+#define MUSB_CSR0_H_RXSTALL		0x0004
+
+/* CSR0 bits to avoid zeroing (write zero clears, write 1 ignored) */
+#define MUSB_CSR0_P_WZC_BITS	\
+	(MUSB_CSR0_P_SENTSTALL)
+#define MUSB_CSR0_H_WZC_BITS	\
+	(MUSB_CSR0_H_NAKTIMEOUT | MUSB_CSR0_H_RXSTALL \
+	| MUSB_CSR0_RXPKTRDY)
+
+/* TxType/RxType */
+#define MUSB_TYPE_SPEED		0xc0
+#define MUSB_TYPE_SPEED_SHIFT	6
+#define MUSB_TYPE_PROTO		0x30	/* Implicitly zero for ep0 */
+#define MUSB_TYPE_PROTO_SHIFT	4
+#define MUSB_TYPE_REMOTE_END	0xf	/* Implicitly zero for ep0 */
+
+/* CONFIGDATA */
+#define MUSB_CONFIGDATA_MPRXE		0x80	/* Auto bulk pkt combining */
+#define MUSB_CONFIGDATA_MPTXE		0x40	/* Auto bulk pkt splitting */
+#define MUSB_CONFIGDATA_BIGENDIAN	0x20
+#define MUSB_CONFIGDATA_HBRXE		0x10	/* HB-ISO for RX */
+#define MUSB_CONFIGDATA_HBTXE		0x08	/* HB-ISO for TX */
+#define MUSB_CONFIGDATA_DYNFIFO		0x04	/* Dynamic FIFO sizing */
+#define MUSB_CONFIGDATA_SOFTCONE	0x02	/* SoftConnect */
+#define MUSB_CONFIGDATA_UTMIDW		0x01	/* Data width 0/1 => 8/16bits */
+
+/* TXCSR in Peripheral and Host mode */
+#define MUSB_TXCSR_AUTOSET		0x8000
+#define MUSB_TXCSR_MODE			0x2000
+#define MUSB_TXCSR_DMAENAB		0x1000
+#define MUSB_TXCSR_FRCDATATOG		0x0800
+#define MUSB_TXCSR_DMAMODE		0x0400
+#define MUSB_TXCSR_CLRDATATOG		0x0040
+#define MUSB_TXCSR_FLUSHFIFO		0x0008
+#define MUSB_TXCSR_FIFONOTEMPTY		0x0002
+#define MUSB_TXCSR_TXPKTRDY		0x0001
+
+/* TXCSR in Peripheral mode */
+#define MUSB_TXCSR_P_ISO		0x4000
+#define MUSB_TXCSR_P_INCOMPTX		0x0080
+#define MUSB_TXCSR_P_SENTSTALL		0x0020
+#define MUSB_TXCSR_P_SENDSTALL		0x0010
+#define MUSB_TXCSR_P_UNDERRUN		0x0004
+
+/* TXCSR in Host mode */
+#define MUSB_TXCSR_H_WR_DATATOGGLE	0x0200
+#define MUSB_TXCSR_H_DATATOGGLE		0x0100
+#define MUSB_TXCSR_H_NAKTIMEOUT		0x0080
+#define MUSB_TXCSR_H_RXSTALL		0x0020
+#define MUSB_TXCSR_H_ERROR		0x0004
+
+/* TXCSR bits to avoid zeroing (write zero clears, write 1 ignored) */
+#define MUSB_TXCSR_P_WZC_BITS	\
+	(MUSB_TXCSR_P_INCOMPTX | MUSB_TXCSR_P_SENTSTALL \
+	| MUSB_TXCSR_P_UNDERRUN | MUSB_TXCSR_FIFONOTEMPTY)
+#define MUSB_TXCSR_H_WZC_BITS	\
+	(MUSB_TXCSR_H_NAKTIMEOUT | MUSB_TXCSR_H_RXSTALL \
+	| MUSB_TXCSR_H_ERROR | MUSB_TXCSR_FIFONOTEMPTY)
+
+/* RXCSR in Peripheral and Host mode */
+#define MUSB_RXCSR_AUTOCLEAR		0x8000
+#define MUSB_RXCSR_DMAENAB		0x2000
+#define MUSB_RXCSR_DISNYET		0x1000
+#define MUSB_RXCSR_PID_ERR		0x1000
+#define MUSB_RXCSR_DMAMODE		0x0800
+#define MUSB_RXCSR_INCOMPRX		0x0100
+#define MUSB_RXCSR_CLRDATATOG		0x0080
+#define MUSB_RXCSR_FLUSHFIFO		0x0010
+#define MUSB_RXCSR_DATAERROR		0x0008
+#define MUSB_RXCSR_FIFOFULL		0x0002
+#define MUSB_RXCSR_RXPKTRDY		0x0001
+
+/* RXCSR in Peripheral mode */
+#define MUSB_RXCSR_P_ISO		0x4000
+#define MUSB_RXCSR_P_SENTSTALL		0x0040
+#define MUSB_RXCSR_P_SENDSTALL		0x0020
+#define MUSB_RXCSR_P_OVERRUN		0x0004
+
+/* RXCSR in Host mode */
+#define MUSB_RXCSR_H_AUTOREQ		0x4000
+#define MUSB_RXCSR_H_WR_DATATOGGLE	0x0400
+#define MUSB_RXCSR_H_DATATOGGLE		0x0200
+#define MUSB_RXCSR_H_RXSTALL		0x0040
+#define MUSB_RXCSR_H_REQPKT		0x0020
+#define MUSB_RXCSR_H_ERROR		0x0004
+
+/* RXCSR bits to avoid zeroing (write zero clears, write 1 ignored) */
+#define MUSB_RXCSR_P_WZC_BITS	\
+	(MUSB_RXCSR_P_SENTSTALL | MUSB_RXCSR_P_OVERRUN \
+	| MUSB_RXCSR_RXPKTRDY)
+#define MUSB_RXCSR_H_WZC_BITS	\
+	(MUSB_RXCSR_H_RXSTALL | MUSB_RXCSR_H_ERROR \
+	| MUSB_RXCSR_DATAERROR | MUSB_RXCSR_RXPKTRDY)
+
+/* HUBADDR */
+#define MUSB_HUBADDR_MULTI_TT		0x80
+
+#endif	/* __MUSB_REGS_H__ */
diff --git a/drivers/usb/musb/musb_virthub.c b/drivers/usb/musb/musb_virthub.c
new file mode 100644
index 000000000000..e0e9ce584175
--- /dev/null
+++ b/drivers/usb/musb/musb_virthub.c
@@ -0,0 +1,425 @@
+/*
+ * MUSB OTG driver virtual root hub support
+ *
+ * Copyright 2005 Mentor Graphics Corporation
+ * Copyright (C) 2005-2006 by Texas Instruments
+ * Copyright (C) 2006-2007 Nokia Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ * THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
+ * NO EVENT SHALL THE AUTHORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/slab.h>
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/time.h>
+#include <linux/timer.h>
+
+#include <asm/unaligned.h>
+
+#include "musb_core.h"
+
+
+static void musb_port_suspend(struct musb *musb, bool do_suspend)
+{
+	u8		power;
+	void __iomem	*mbase = musb->mregs;
+
+	if (!is_host_active(musb))
+		return;
+
+	/* NOTE:  this doesn't necessarily put PHY into low power mode,
+	 * turning off its clock; that's a function of PHY integration and
+	 * MUSB_POWER_ENSUSPEND.  PHY may need a clock (sigh) to detect
+	 * SE0 changing to connect (J) or wakeup (K) states.
+	 */
+	power = musb_readb(mbase, MUSB_POWER);
+	if (do_suspend) {
+		int retries = 10000;
+
+		power &= ~MUSB_POWER_RESUME;
+		power |= MUSB_POWER_SUSPENDM;
+		musb_writeb(mbase, MUSB_POWER, power);
+
+		/* Needed for OPT A tests */
+		power = musb_readb(mbase, MUSB_POWER);
+		while (power & MUSB_POWER_SUSPENDM) {
+			power = musb_readb(mbase, MUSB_POWER);
+			if (retries-- < 1)
+				break;
+		}
+
+		DBG(3, "Root port suspended, power %02x\n", power);
+
+		musb->port1_status |= USB_PORT_STAT_SUSPEND;
+		switch (musb->xceiv.state) {
+		case OTG_STATE_A_HOST:
+			musb->xceiv.state = OTG_STATE_A_SUSPEND;
+			musb->is_active = is_otg_enabled(musb)
+					&& musb->xceiv.host->b_hnp_enable;
+			musb_platform_try_idle(musb, 0);
+			break;
+#ifdef	CONFIG_USB_MUSB_OTG
+		case OTG_STATE_B_HOST:
+			musb->xceiv.state = OTG_STATE_B_WAIT_ACON;
+			musb->is_active = is_otg_enabled(musb)
+					&& musb->xceiv.host->b_hnp_enable;
+			musb_platform_try_idle(musb, 0);
+			break;
+#endif
+		default:
+			DBG(1, "bogus rh suspend? %s\n",
+				otg_state_string(musb));
+		}
+	} else if (power & MUSB_POWER_SUSPENDM) {
+		power &= ~MUSB_POWER_SUSPENDM;
+		power |= MUSB_POWER_RESUME;
+		musb_writeb(mbase, MUSB_POWER, power);
+
+		DBG(3, "Root port resuming, power %02x\n", power);
+
+		/* later, GetPortStatus will stop RESUME signaling */
+		musb->port1_status |= MUSB_PORT_STAT_RESUME;
+		musb->rh_timer = jiffies + msecs_to_jiffies(20);
+	}
+}
+
+static void musb_port_reset(struct musb *musb, bool do_reset)
+{
+	u8		power;
+	void __iomem	*mbase = musb->mregs;
+
+#ifdef CONFIG_USB_MUSB_OTG
+	if (musb->xceiv.state == OTG_STATE_B_IDLE) {
+		DBG(2, "HNP: Returning from HNP; no hub reset from b_idle\n");
+		musb->port1_status &= ~USB_PORT_STAT_RESET;
+		return;
+	}
+#endif
+
+	if (!is_host_active(musb))
+		return;
+
+	/* NOTE:  caller guarantees it will turn off the reset when
+	 * the appropriate amount of time has passed
+	 */
+	power = musb_readb(mbase, MUSB_POWER);
+	if (do_reset) {
+
+		/*
+		 * If RESUME is set, we must make sure it stays minimum 20 ms.
+		 * Then we must clear RESUME and wait a bit to let musb start
+		 * generating SOFs. If we don't do this, OPT HS A 6.8 tests
+		 * fail with "Error! Did not receive an SOF before suspend
+		 * detected".
+		 */
+		if (power &  MUSB_POWER_RESUME) {
+			while (time_before(jiffies, musb->rh_timer))
+				msleep(1);
+			musb_writeb(mbase, MUSB_POWER,
+				power & ~MUSB_POWER_RESUME);
+			msleep(1);
+		}
+
+		musb->ignore_disconnect = true;
+		power &= 0xf0;
+		musb_writeb(mbase, MUSB_POWER,
+				power | MUSB_POWER_RESET);
+
+		musb->port1_status |= USB_PORT_STAT_RESET;
+		musb->port1_status &= ~USB_PORT_STAT_ENABLE;
+		musb->rh_timer = jiffies + msecs_to_jiffies(50);
+	} else {
+		DBG(4, "root port reset stopped\n");
+		musb_writeb(mbase, MUSB_POWER,
+				power & ~MUSB_POWER_RESET);
+
+		musb->ignore_disconnect = false;
+
+		power = musb_readb(mbase, MUSB_POWER);
+		if (power & MUSB_POWER_HSMODE) {
+			DBG(4, "high-speed device connected\n");
+			musb->port1_status |= USB_PORT_STAT_HIGH_SPEED;
+		}
+
+		musb->port1_status &= ~USB_PORT_STAT_RESET;
+		musb->port1_status |= USB_PORT_STAT_ENABLE
+					| (USB_PORT_STAT_C_RESET << 16)
+					| (USB_PORT_STAT_C_ENABLE << 16);
+		usb_hcd_poll_rh_status(musb_to_hcd(musb));
+
+		musb->vbuserr_retry = VBUSERR_RETRY_COUNT;
+	}
+}
+
+void musb_root_disconnect(struct musb *musb)
+{
+	musb->port1_status = (1 << USB_PORT_FEAT_POWER)
+			| (1 << USB_PORT_FEAT_C_CONNECTION);
+
+	usb_hcd_poll_rh_status(musb_to_hcd(musb));
+	musb->is_active = 0;
+
+	switch (musb->xceiv.state) {
+	case OTG_STATE_A_HOST:
+	case OTG_STATE_A_SUSPEND:
+		musb->xceiv.state = OTG_STATE_A_WAIT_BCON;
+		musb->is_active = 0;
+		break;
+	case OTG_STATE_A_WAIT_VFALL:
+		musb->xceiv.state = OTG_STATE_B_IDLE;
+		break;
+	default:
+		DBG(1, "host disconnect (%s)\n", otg_state_string(musb));
+	}
+}
+
+
+/*---------------------------------------------------------------------*/
+
+/* Caller may or may not hold musb->lock */
+int musb_hub_status_data(struct usb_hcd *hcd, char *buf)
+{
+	struct musb	*musb = hcd_to_musb(hcd);
+	int		retval = 0;
+
+	/* called in_irq() via usb_hcd_poll_rh_status() */
+	if (musb->port1_status & 0xffff0000) {
+		*buf = 0x02;
+		retval = 1;
+	}
+	return retval;
+}
+
+int musb_hub_control(
+	struct usb_hcd	*hcd,
+	u16		typeReq,
+	u16		wValue,
+	u16		wIndex,
+	char		*buf,
+	u16		wLength)
+{
+	struct musb	*musb = hcd_to_musb(hcd);
+	u32		temp;
+	int		retval = 0;
+	unsigned long	flags;
+
+	spin_lock_irqsave(&musb->lock, flags);
+
+	if (unlikely(!test_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags))) {
+		spin_unlock_irqrestore(&musb->lock, flags);
+		return -ESHUTDOWN;
+	}
+
+	/* hub features:  always zero, setting is a NOP
+	 * port features: reported, sometimes updated when host is active
+	 * no indicators
+	 */
+	switch (typeReq) {
+	case ClearHubFeature:
+	case SetHubFeature:
+		switch (wValue) {
+		case C_HUB_OVER_CURRENT:
+		case C_HUB_LOCAL_POWER:
+			break;
+		default:
+			goto error;
+		}
+		break;
+	case ClearPortFeature:
+		if ((wIndex & 0xff) != 1)
+			goto error;
+
+		switch (wValue) {
+		case USB_PORT_FEAT_ENABLE:
+			break;
+		case USB_PORT_FEAT_SUSPEND:
+			musb_port_suspend(musb, false);
+			break;
+		case USB_PORT_FEAT_POWER:
+			if (!(is_otg_enabled(musb) && hcd->self.is_b_host))
+				musb_set_vbus(musb, 0);
+			break;
+		case USB_PORT_FEAT_C_CONNECTION:
+		case USB_PORT_FEAT_C_ENABLE:
+		case USB_PORT_FEAT_C_OVER_CURRENT:
+		case USB_PORT_FEAT_C_RESET:
+		case USB_PORT_FEAT_C_SUSPEND:
+			break;
+		default:
+			goto error;
+		}
+		DBG(5, "clear feature %d\n", wValue);
+		musb->port1_status &= ~(1 << wValue);
+		break;
+	case GetHubDescriptor:
+		{
+		struct usb_hub_descriptor *desc = (void *)buf;
+
+		desc->bDescLength = 9;
+		desc->bDescriptorType = 0x29;
+		desc->bNbrPorts = 1;
+		desc->wHubCharacteristics = __constant_cpu_to_le16(
+				  0x0001	/* per-port power switching */
+				| 0x0010	/* no overcurrent reporting */
+				);
+		desc->bPwrOn2PwrGood = 5;	/* msec/2 */
+		desc->bHubContrCurrent = 0;
+
+		/* workaround bogus struct definition */
+		desc->DeviceRemovable[0] = 0x02;	/* port 1 */
+		desc->DeviceRemovable[1] = 0xff;
+		}
+		break;
+	case GetHubStatus:
+		temp = 0;
+		*(__le32 *) buf = cpu_to_le32(temp);
+		break;
+	case GetPortStatus:
+		if (wIndex != 1)
+			goto error;
+
+		/* finish RESET signaling? */
+		if ((musb->port1_status & USB_PORT_STAT_RESET)
+				&& time_after_eq(jiffies, musb->rh_timer))
+			musb_port_reset(musb, false);
+
+		/* finish RESUME signaling? */
+		if ((musb->port1_status & MUSB_PORT_STAT_RESUME)
+				&& time_after_eq(jiffies, musb->rh_timer)) {
+			u8		power;
+
+			power = musb_readb(musb->mregs, MUSB_POWER);
+			power &= ~MUSB_POWER_RESUME;
+			DBG(4, "root port resume stopped, power %02x\n",
+					power);
+			musb_writeb(musb->mregs, MUSB_POWER, power);
+
+			/* ISSUE:  DaVinci (RTL 1.300) disconnects after
+			 * resume of high speed peripherals (but not full
+			 * speed ones).
+			 */
+
+			musb->is_active = 1;
+			musb->port1_status &= ~(USB_PORT_STAT_SUSPEND
+					| MUSB_PORT_STAT_RESUME);
+			musb->port1_status |= USB_PORT_STAT_C_SUSPEND << 16;
+			usb_hcd_poll_rh_status(musb_to_hcd(musb));
+			/* NOTE: it might really be A_WAIT_BCON ... */
+			musb->xceiv.state = OTG_STATE_A_HOST;
+		}
+
+		put_unaligned(cpu_to_le32(musb->port1_status
+					& ~MUSB_PORT_STAT_RESUME),
+				(__le32 *) buf);
+
+		/* port change status is more interesting */
+		DBG(get_unaligned((u16 *)(buf+2)) ? 2 : 5, "port status %08x\n",
+				musb->port1_status);
+		break;
+	case SetPortFeature:
+		if ((wIndex & 0xff) != 1)
+			goto error;
+
+		switch (wValue) {
+		case USB_PORT_FEAT_POWER:
+			/* NOTE: this controller has a strange state machine
+			 * that involves "requesting sessions" according to
+			 * magic side effects from incompletely-described
+			 * rules about startup...
+			 *
+			 * This call is what really starts the host mode; be
+			 * very careful about side effects if you reorder any
+			 * initialization logic, e.g. for OTG, or change any
+			 * logic relating to VBUS power-up.
+			 */
+			if (!(is_otg_enabled(musb) && hcd->self.is_b_host))
+				musb_start(musb);
+			break;
+		case USB_PORT_FEAT_RESET:
+			musb_port_reset(musb, true);
+			break;
+		case USB_PORT_FEAT_SUSPEND:
+			musb_port_suspend(musb, true);
+			break;
+		case USB_PORT_FEAT_TEST:
+			if (unlikely(is_host_active(musb)))
+				goto error;
+
+			wIndex >>= 8;
+			switch (wIndex) {
+			case 1:
+				pr_debug("TEST_J\n");
+				temp = MUSB_TEST_J;
+				break;
+			case 2:
+				pr_debug("TEST_K\n");
+				temp = MUSB_TEST_K;
+				break;
+			case 3:
+				pr_debug("TEST_SE0_NAK\n");
+				temp = MUSB_TEST_SE0_NAK;
+				break;
+			case 4:
+				pr_debug("TEST_PACKET\n");
+				temp = MUSB_TEST_PACKET;
+				musb_load_testpacket(musb);
+				break;
+			case 5:
+				pr_debug("TEST_FORCE_ENABLE\n");
+				temp = MUSB_TEST_FORCE_HOST
+					| MUSB_TEST_FORCE_HS;
+
+				musb_writeb(musb->mregs, MUSB_DEVCTL,
+						MUSB_DEVCTL_SESSION);
+				break;
+			case 6:
+				pr_debug("TEST_FIFO_ACCESS\n");
+				temp = MUSB_TEST_FIFO_ACCESS;
+				break;
+			default:
+				goto error;
+			}
+			musb_writeb(musb->mregs, MUSB_TESTMODE, temp);
+			break;
+		default:
+			goto error;
+		}
+		DBG(5, "set feature %d\n", wValue);
+		musb->port1_status |= 1 << wValue;
+		break;
+
+	default:
+error:
+		/* "protocol stall" on error */
+		retval = -EPIPE;
+	}
+	spin_unlock_irqrestore(&musb->lock, flags);
+	return retval;
+}
diff --git a/drivers/usb/musb/musbhsdma.c b/drivers/usb/musb/musbhsdma.c
new file mode 100644
index 000000000000..9ba8fb7fcd24
--- /dev/null
+++ b/drivers/usb/musb/musbhsdma.c
@@ -0,0 +1,433 @@
+/*
+ * MUSB OTG driver - support for Mentor's DMA controller
+ *
+ * Copyright 2005 Mentor Graphics Corporation
+ * Copyright (C) 2005-2007 by Texas Instruments
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ * THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
+ * NO EVENT SHALL THE AUTHORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ */
+#include <linux/device.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+#include "musb_core.h"
+
+#if defined(CONFIG_ARCH_OMAP2430) || defined(CONFIG_ARCH_OMAP3430)
+#include "omap2430.h"
+#endif
+
+#define MUSB_HSDMA_BASE		0x200
+#define MUSB_HSDMA_INTR		(MUSB_HSDMA_BASE + 0)
+#define MUSB_HSDMA_CONTROL		0x4
+#define MUSB_HSDMA_ADDRESS		0x8
+#define MUSB_HSDMA_COUNT		0xc
+
+#define MUSB_HSDMA_CHANNEL_OFFSET(_bChannel, _offset)		\
+		(MUSB_HSDMA_BASE + (_bChannel << 4) + _offset)
+
+/* control register (16-bit): */
+#define MUSB_HSDMA_ENABLE_SHIFT		0
+#define MUSB_HSDMA_TRANSMIT_SHIFT		1
+#define MUSB_HSDMA_MODE1_SHIFT		2
+#define MUSB_HSDMA_IRQENABLE_SHIFT		3
+#define MUSB_HSDMA_ENDPOINT_SHIFT		4
+#define MUSB_HSDMA_BUSERROR_SHIFT		8
+#define MUSB_HSDMA_BURSTMODE_SHIFT		9
+#define MUSB_HSDMA_BURSTMODE		(3 << MUSB_HSDMA_BURSTMODE_SHIFT)
+#define MUSB_HSDMA_BURSTMODE_UNSPEC	0
+#define MUSB_HSDMA_BURSTMODE_INCR4	1
+#define MUSB_HSDMA_BURSTMODE_INCR8	2
+#define MUSB_HSDMA_BURSTMODE_INCR16	3
+
+#define MUSB_HSDMA_CHANNELS		8
+
+struct musb_dma_controller;
+
+struct musb_dma_channel {
+	struct dma_channel		Channel;
+	struct musb_dma_controller	*controller;
+	u32				dwStartAddress;
+	u32				len;
+	u16				wMaxPacketSize;
+	u8				bIndex;
+	u8				epnum;
+	u8				transmit;
+};
+
+struct musb_dma_controller {
+	struct dma_controller		Controller;
+	struct musb_dma_channel		aChannel[MUSB_HSDMA_CHANNELS];
+	void				*pDmaPrivate;
+	void __iomem			*pCoreBase;
+	u8				bChannelCount;
+	u8				bmUsedChannels;
+	u8				irq;
+};
+
+static int dma_controller_start(struct dma_controller *c)
+{
+	/* nothing to do */
+	return 0;
+}
+
+static void dma_channel_release(struct dma_channel *pChannel);
+
+static int dma_controller_stop(struct dma_controller *c)
+{
+	struct musb_dma_controller *controller =
+		container_of(c, struct musb_dma_controller, Controller);
+	struct musb *musb = (struct musb *) controller->pDmaPrivate;
+	struct dma_channel *pChannel;
+	u8 bBit;
+
+	if (controller->bmUsedChannels != 0) {
+		dev_err(musb->controller,
+			"Stopping DMA controller while channel active\n");
+
+		for (bBit = 0; bBit < MUSB_HSDMA_CHANNELS; bBit++) {
+			if (controller->bmUsedChannels & (1 << bBit)) {
+				pChannel = &controller->aChannel[bBit].Channel;
+				dma_channel_release(pChannel);
+
+				if (!controller->bmUsedChannels)
+					break;
+			}
+		}
+	}
+	return 0;
+}
+
+static struct dma_channel *dma_channel_allocate(struct dma_controller *c,
+				struct musb_hw_ep *hw_ep, u8 transmit)
+{
+	u8 bBit;
+	struct dma_channel *pChannel = NULL;
+	struct musb_dma_channel *pImplChannel = NULL;
+	struct musb_dma_controller *controller =
+			container_of(c, struct musb_dma_controller, Controller);
+
+	for (bBit = 0; bBit < MUSB_HSDMA_CHANNELS; bBit++) {
+		if (!(controller->bmUsedChannels & (1 << bBit))) {
+			controller->bmUsedChannels |= (1 << bBit);
+			pImplChannel = &(controller->aChannel[bBit]);
+			pImplChannel->controller = controller;
+			pImplChannel->bIndex = bBit;
+			pImplChannel->epnum = hw_ep->epnum;
+			pImplChannel->transmit = transmit;
+			pChannel = &(pImplChannel->Channel);
+			pChannel->private_data = pImplChannel;
+			pChannel->status = MUSB_DMA_STATUS_FREE;
+			pChannel->max_len = 0x10000;
+			/* Tx => mode 1; Rx => mode 0 */
+			pChannel->desired_mode = transmit;
+			pChannel->actual_len = 0;
+			break;
+		}
+	}
+	return pChannel;
+}
+
+static void dma_channel_release(struct dma_channel *pChannel)
+{
+	struct musb_dma_channel *pImplChannel =
+		(struct musb_dma_channel *) pChannel->private_data;
+
+	pChannel->actual_len = 0;
+	pImplChannel->dwStartAddress = 0;
+	pImplChannel->len = 0;
+
+	pImplChannel->controller->bmUsedChannels &=
+		~(1 << pImplChannel->bIndex);
+
+	pChannel->status = MUSB_DMA_STATUS_UNKNOWN;
+}
+
+static void configure_channel(struct dma_channel *pChannel,
+				u16 packet_sz, u8 mode,
+				dma_addr_t dma_addr, u32 len)
+{
+	struct musb_dma_channel *pImplChannel =
+		(struct musb_dma_channel *) pChannel->private_data;
+	struct musb_dma_controller *controller = pImplChannel->controller;
+	void __iomem *mbase = controller->pCoreBase;
+	u8 bChannel = pImplChannel->bIndex;
+	u16 csr = 0;
+
+	DBG(4, "%p, pkt_sz %d, addr 0x%x, len %d, mode %d\n",
+			pChannel, packet_sz, dma_addr, len, mode);
+
+	if (mode) {
+		csr |= 1 << MUSB_HSDMA_MODE1_SHIFT;
+		BUG_ON(len < packet_sz);
+
+		if (packet_sz >= 64) {
+			csr |= MUSB_HSDMA_BURSTMODE_INCR16
+					<< MUSB_HSDMA_BURSTMODE_SHIFT;
+		} else if (packet_sz >= 32) {
+			csr |= MUSB_HSDMA_BURSTMODE_INCR8
+					<< MUSB_HSDMA_BURSTMODE_SHIFT;
+		} else if (packet_sz >= 16) {
+			csr |= MUSB_HSDMA_BURSTMODE_INCR4
+					<< MUSB_HSDMA_BURSTMODE_SHIFT;
+		}
+	}
+
+	csr |= (pImplChannel->epnum << MUSB_HSDMA_ENDPOINT_SHIFT)
+		| (1 << MUSB_HSDMA_ENABLE_SHIFT)
+		| (1 << MUSB_HSDMA_IRQENABLE_SHIFT)
+		| (pImplChannel->transmit
+				? (1 << MUSB_HSDMA_TRANSMIT_SHIFT)
+				: 0);
+
+	/* address/count */
+	musb_writel(mbase,
+		MUSB_HSDMA_CHANNEL_OFFSET(bChannel, MUSB_HSDMA_ADDRESS),
+		dma_addr);
+	musb_writel(mbase,
+		MUSB_HSDMA_CHANNEL_OFFSET(bChannel, MUSB_HSDMA_COUNT),
+		len);
+
+	/* control (this should start things) */
+	musb_writew(mbase,
+		MUSB_HSDMA_CHANNEL_OFFSET(bChannel, MUSB_HSDMA_CONTROL),
+		csr);
+}
+
+static int dma_channel_program(struct dma_channel *pChannel,
+				u16 packet_sz, u8 mode,
+				dma_addr_t dma_addr, u32 len)
+{
+	struct musb_dma_channel *pImplChannel =
+			(struct musb_dma_channel *) pChannel->private_data;
+
+	DBG(2, "ep%d-%s pkt_sz %d, dma_addr 0x%x length %d, mode %d\n",
+		pImplChannel->epnum,
+		pImplChannel->transmit ? "Tx" : "Rx",
+		packet_sz, dma_addr, len, mode);
+
+	BUG_ON(pChannel->status == MUSB_DMA_STATUS_UNKNOWN ||
+		pChannel->status == MUSB_DMA_STATUS_BUSY);
+
+	pChannel->actual_len = 0;
+	pImplChannel->dwStartAddress = dma_addr;
+	pImplChannel->len = len;
+	pImplChannel->wMaxPacketSize = packet_sz;
+	pChannel->status = MUSB_DMA_STATUS_BUSY;
+
+	if ((mode == 1) && (len >= packet_sz))
+		configure_channel(pChannel, packet_sz, 1, dma_addr, len);
+	else
+		configure_channel(pChannel, packet_sz, 0, dma_addr, len);
+
+	return true;
+}
+
+static int dma_channel_abort(struct dma_channel *pChannel)
+{
+	struct musb_dma_channel *pImplChannel =
+		(struct musb_dma_channel *) pChannel->private_data;
+	u8 bChannel = pImplChannel->bIndex;
+	void __iomem *mbase = pImplChannel->controller->pCoreBase;
+	u16 csr;
+
+	if (pChannel->status == MUSB_DMA_STATUS_BUSY) {
+		if (pImplChannel->transmit) {
+
+			csr = musb_readw(mbase,
+				MUSB_EP_OFFSET(pImplChannel->epnum,
+						MUSB_TXCSR));
+			csr &= ~(MUSB_TXCSR_AUTOSET |
+				 MUSB_TXCSR_DMAENAB |
+				 MUSB_TXCSR_DMAMODE);
+			musb_writew(mbase,
+				MUSB_EP_OFFSET(pImplChannel->epnum,
+						MUSB_TXCSR),
+				csr);
+		} else {
+			csr = musb_readw(mbase,
+				MUSB_EP_OFFSET(pImplChannel->epnum,
+						MUSB_RXCSR));
+			csr &= ~(MUSB_RXCSR_AUTOCLEAR |
+				 MUSB_RXCSR_DMAENAB |
+				 MUSB_RXCSR_DMAMODE);
+			musb_writew(mbase,
+				MUSB_EP_OFFSET(pImplChannel->epnum,
+						MUSB_RXCSR),
+				csr);
+		}
+
+		musb_writew(mbase,
+			MUSB_HSDMA_CHANNEL_OFFSET(bChannel, MUSB_HSDMA_CONTROL),
+			0);
+		musb_writel(mbase,
+			MUSB_HSDMA_CHANNEL_OFFSET(bChannel, MUSB_HSDMA_ADDRESS),
+			0);
+		musb_writel(mbase,
+			MUSB_HSDMA_CHANNEL_OFFSET(bChannel, MUSB_HSDMA_COUNT),
+			0);
+
+		pChannel->status = MUSB_DMA_STATUS_FREE;
+	}
+	return 0;
+}
+
+static irqreturn_t dma_controller_irq(int irq, void *private_data)
+{
+	struct musb_dma_controller *controller =
+		(struct musb_dma_controller *)private_data;
+	struct musb_dma_channel *pImplChannel;
+	struct musb *musb = controller->pDmaPrivate;
+	void __iomem *mbase = controller->pCoreBase;
+	struct dma_channel *pChannel;
+	u8 bChannel;
+	u16 csr;
+	u32 dwAddress;
+	u8 int_hsdma;
+	irqreturn_t retval = IRQ_NONE;
+	unsigned long flags;
+
+	spin_lock_irqsave(&musb->lock, flags);
+
+	int_hsdma = musb_readb(mbase, MUSB_HSDMA_INTR);
+	if (!int_hsdma)
+		goto done;
+
+	for (bChannel = 0; bChannel < MUSB_HSDMA_CHANNELS; bChannel++) {
+		if (int_hsdma & (1 << bChannel)) {
+			pImplChannel = (struct musb_dma_channel *)
+					&(controller->aChannel[bChannel]);
+			pChannel = &pImplChannel->Channel;
+
+			csr = musb_readw(mbase,
+					MUSB_HSDMA_CHANNEL_OFFSET(bChannel,
+							MUSB_HSDMA_CONTROL));
+
+			if (csr & (1 << MUSB_HSDMA_BUSERROR_SHIFT))
+				pImplChannel->Channel.status =
+					MUSB_DMA_STATUS_BUS_ABORT;
+			else {
+				u8 devctl;
+
+				dwAddress = musb_readl(mbase,
+						MUSB_HSDMA_CHANNEL_OFFSET(
+							bChannel,
+							MUSB_HSDMA_ADDRESS));
+				pChannel->actual_len = dwAddress
+					- pImplChannel->dwStartAddress;
+
+				DBG(2, "ch %p, 0x%x -> 0x%x (%d / %d) %s\n",
+					pChannel, pImplChannel->dwStartAddress,
+					dwAddress, pChannel->actual_len,
+					pImplChannel->len,
+					(pChannel->actual_len
+						< pImplChannel->len) ?
+					"=> reconfig 0" : "=> complete");
+
+				devctl = musb_readb(mbase, MUSB_DEVCTL);
+
+				pChannel->status = MUSB_DMA_STATUS_FREE;
+
+				/* completed */
+				if ((devctl & MUSB_DEVCTL_HM)
+					&& (pImplChannel->transmit)
+					&& ((pChannel->desired_mode == 0)
+					    || (pChannel->actual_len &
+					    (pImplChannel->wMaxPacketSize - 1)))
+					 ) {
+					/* Send out the packet */
+					musb_ep_select(mbase,
+						pImplChannel->epnum);
+					musb_writew(mbase, MUSB_EP_OFFSET(
+							pImplChannel->epnum,
+							MUSB_TXCSR),
+						MUSB_TXCSR_TXPKTRDY);
+				} else
+					musb_dma_completion(
+						musb,
+						pImplChannel->epnum,
+						pImplChannel->transmit);
+			}
+		}
+	}
+	retval = IRQ_HANDLED;
+done:
+	spin_unlock_irqrestore(&musb->lock, flags);
+	return retval;
+}
+
+void dma_controller_destroy(struct dma_controller *c)
+{
+	struct musb_dma_controller *controller;
+
+	controller = container_of(c, struct musb_dma_controller, Controller);
+	if (!controller)
+		return;
+
+	if (controller->irq)
+		free_irq(controller->irq, c);
+
+	kfree(controller);
+}
+
+struct dma_controller *__init
+dma_controller_create(struct musb *musb, void __iomem *pCoreBase)
+{
+	struct musb_dma_controller *controller;
+	struct device *dev = musb->controller;
+	struct platform_device *pdev = to_platform_device(dev);
+	int irq = platform_get_irq(pdev, 1);
+
+	if (irq == 0) {
+		dev_err(dev, "No DMA interrupt line!\n");
+		return NULL;
+	}
+
+	controller = kzalloc(sizeof(struct musb_dma_controller), GFP_KERNEL);
+	if (!controller)
+		return NULL;
+
+	controller->bChannelCount = MUSB_HSDMA_CHANNELS;
+	controller->pDmaPrivate = musb;
+	controller->pCoreBase = pCoreBase;
+
+	controller->Controller.start = dma_controller_start;
+	controller->Controller.stop = dma_controller_stop;
+	controller->Controller.channel_alloc = dma_channel_allocate;
+	controller->Controller.channel_release = dma_channel_release;
+	controller->Controller.channel_program = dma_channel_program;
+	controller->Controller.channel_abort = dma_channel_abort;
+
+	if (request_irq(irq, dma_controller_irq, IRQF_DISABLED,
+			musb->controller->bus_id, &controller->Controller)) {
+		dev_err(dev, "request_irq %d failed!\n", irq);
+		dma_controller_destroy(&controller->Controller);
+		return NULL;
+	}
+
+	controller->irq = irq;
+
+	return &controller->Controller;
+}
diff --git a/drivers/usb/musb/omap2430.c b/drivers/usb/musb/omap2430.c
new file mode 100644
index 000000000000..298b22e6ad0d
--- /dev/null
+++ b/drivers/usb/musb/omap2430.c
@@ -0,0 +1,324 @@
+/*
+ * Copyright (C) 2005-2007 by Texas Instruments
+ * Some code has been taken from tusb6010.c
+ * Copyrights for that are attributable to:
+ * Copyright (C) 2006 Nokia Corporation
+ * Jarkko Nikula <jarkko.nikula@nokia.com>
+ * Tony Lindgren <tony@atomide.com>
+ *
+ * This file is part of the Inventra Controller Driver for Linux.
+ *
+ * The Inventra Controller Driver for Linux is free software; you
+ * can redistribute it and/or modify it under the terms of the GNU
+ * General Public License version 2 as published by the Free Software
+ * Foundation.
+ *
+ * The Inventra Controller Driver for Linux is distributed in
+ * the hope that it will be useful, but WITHOUT ANY WARRANTY;
+ * without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public
+ * License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with The Inventra Controller Driver for Linux ; if not,
+ * write to the Free Software Foundation, Inc., 59 Temple Place,
+ * Suite 330, Boston, MA  02111-1307  USA
+ *
+ */
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/slab.h>
+#include <linux/init.h>
+#include <linux/list.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+
+#include <asm/mach-types.h>
+#include <asm/arch/hardware.h>
+#include <asm/arch/mux.h>
+
+#include "musb_core.h"
+#include "omap2430.h"
+
+#ifdef CONFIG_ARCH_OMAP3430
+#define	get_cpu_rev()	2
+#endif
+
+#define MUSB_TIMEOUT_A_WAIT_BCON	1100
+
+static struct timer_list musb_idle_timer;
+
+static void musb_do_idle(unsigned long _musb)
+{
+	struct musb	*musb = (void *)_musb;
+	unsigned long	flags;
+	u8	power;
+	u8	devctl;
+
+	devctl = musb_readb(musb->mregs, MUSB_DEVCTL);
+
+	spin_lock_irqsave(&musb->lock, flags);
+
+	switch (musb->xceiv.state) {
+	case OTG_STATE_A_WAIT_BCON:
+		devctl &= ~MUSB_DEVCTL_SESSION;
+		musb_writeb(musb->mregs, MUSB_DEVCTL, devctl);
+
+		devctl = musb_readb(musb->mregs, MUSB_DEVCTL);
+		if (devctl & MUSB_DEVCTL_BDEVICE) {
+			musb->xceiv.state = OTG_STATE_B_IDLE;
+			MUSB_DEV_MODE(musb);
+		} else {
+			musb->xceiv.state = OTG_STATE_A_IDLE;
+			MUSB_HST_MODE(musb);
+		}
+		break;
+#ifdef CONFIG_USB_MUSB_HDRC_HCD
+	case OTG_STATE_A_SUSPEND:
+		/* finish RESUME signaling? */
+		if (musb->port1_status & MUSB_PORT_STAT_RESUME) {
+			power = musb_readb(musb->mregs, MUSB_POWER);
+			power &= ~MUSB_POWER_RESUME;
+			DBG(1, "root port resume stopped, power %02x\n", power);
+			musb_writeb(musb->mregs, MUSB_POWER, power);
+			musb->is_active = 1;
+			musb->port1_status &= ~(USB_PORT_STAT_SUSPEND
+						| MUSB_PORT_STAT_RESUME);
+			musb->port1_status |= USB_PORT_STAT_C_SUSPEND << 16;
+			usb_hcd_poll_rh_status(musb_to_hcd(musb));
+			/* NOTE: it might really be A_WAIT_BCON ... */
+			musb->xceiv.state = OTG_STATE_A_HOST;
+		}
+		break;
+#endif
+#ifdef CONFIG_USB_MUSB_HDRC_HCD
+	case OTG_STATE_A_HOST:
+		devctl = musb_readb(musb->mregs, MUSB_DEVCTL);
+		if (devctl &  MUSB_DEVCTL_BDEVICE)
+			musb->xceiv.state = OTG_STATE_B_IDLE;
+		else
+			musb->xceiv.state = OTG_STATE_A_WAIT_BCON;
+#endif
+	default:
+		break;
+	}
+	spin_unlock_irqrestore(&musb->lock, flags);
+}
+
+
+void musb_platform_try_idle(struct musb *musb, unsigned long timeout)
+{
+	unsigned long		default_timeout = jiffies + msecs_to_jiffies(3);
+	static unsigned long	last_timer;
+
+	if (timeout == 0)
+		timeout = default_timeout;
+
+	/* Never idle if active, or when VBUS timeout is not set as host */
+	if (musb->is_active || ((musb->a_wait_bcon == 0)
+			&& (musb->xceiv.state == OTG_STATE_A_WAIT_BCON))) {
+		DBG(4, "%s active, deleting timer\n", otg_state_string(musb));
+		del_timer(&musb_idle_timer);
+		last_timer = jiffies;
+		return;
+	}
+
+	if (time_after(last_timer, timeout)) {
+		if (!timer_pending(&musb_idle_timer))
+			last_timer = timeout;
+		else {
+			DBG(4, "Longer idle timer already pending, ignoring\n");
+			return;
+		}
+	}
+	last_timer = timeout;
+
+	DBG(4, "%s inactive, for idle timer for %lu ms\n",
+		otg_state_string(musb),
+		(unsigned long)jiffies_to_msecs(timeout - jiffies));
+	mod_timer(&musb_idle_timer, timeout);
+}
+
+void musb_platform_enable(struct musb *musb)
+{
+}
+void musb_platform_disable(struct musb *musb)
+{
+}
+static void omap_vbus_power(struct musb *musb, int is_on, int sleeping)
+{
+}
+
+static void omap_set_vbus(struct musb *musb, int is_on)
+{
+	u8		devctl;
+	/* HDRC controls CPEN, but beware current surges during device
+	 * connect.  They can trigger transient overcurrent conditions
+	 * that must be ignored.
+	 */
+
+	devctl = musb_readb(musb->mregs, MUSB_DEVCTL);
+
+	if (is_on) {
+		musb->is_active = 1;
+		musb->xceiv.default_a = 1;
+		musb->xceiv.state = OTG_STATE_A_WAIT_VRISE;
+		devctl |= MUSB_DEVCTL_SESSION;
+
+		MUSB_HST_MODE(musb);
+	} else {
+		musb->is_active = 0;
+
+		/* NOTE:  we're skipping A_WAIT_VFALL -> A_IDLE and
+		 * jumping right to B_IDLE...
+		 */
+
+		musb->xceiv.default_a = 0;
+		musb->xceiv.state = OTG_STATE_B_IDLE;
+		devctl &= ~MUSB_DEVCTL_SESSION;
+
+		MUSB_DEV_MODE(musb);
+	}
+	musb_writeb(musb->mregs, MUSB_DEVCTL, devctl);
+
+	DBG(1, "VBUS %s, devctl %02x "
+		/* otg %3x conf %08x prcm %08x */ "\n",
+		otg_state_string(musb),
+		musb_readb(musb->mregs, MUSB_DEVCTL));
+}
+static int omap_set_power(struct otg_transceiver *x, unsigned mA)
+{
+	return 0;
+}
+
+static int musb_platform_resume(struct musb *musb);
+
+void musb_platform_set_mode(struct musb *musb, u8 musb_mode)
+{
+	u8	devctl = musb_readb(musb->mregs, MUSB_DEVCTL);
+
+	devctl |= MUSB_DEVCTL_SESSION;
+	musb_writeb(musb->mregs, MUSB_DEVCTL, devctl);
+
+	switch (musb_mode) {
+	case MUSB_HOST:
+		otg_set_host(&musb->xceiv, musb->xceiv.host);
+		break;
+	case MUSB_PERIPHERAL:
+		otg_set_peripheral(&musb->xceiv, musb->xceiv.gadget);
+		break;
+	case MUSB_OTG:
+		break;
+	}
+}
+
+int __init musb_platform_init(struct musb *musb)
+{
+	u32 l;
+
+#if defined(CONFIG_ARCH_OMAP2430)
+	omap_cfg_reg(AE5_2430_USB0HS_STP);
+#endif
+
+	musb_platform_resume(musb);
+
+	l = omap_readl(OTG_SYSCONFIG);
+	l &= ~ENABLEWAKEUP;	/* disable wakeup */
+	l &= ~NOSTDBY;		/* remove possible nostdby */
+	l |= SMARTSTDBY;	/* enable smart standby */
+	l &= ~AUTOIDLE;		/* disable auto idle */
+	l &= ~NOIDLE;		/* remove possible noidle */
+	l |= SMARTIDLE;		/* enable smart idle */
+	l |= AUTOIDLE;		/* enable auto idle */
+	omap_writel(l, OTG_SYSCONFIG);
+
+	l = omap_readl(OTG_INTERFSEL);
+	l |= ULPI_12PIN;
+	omap_writel(l, OTG_INTERFSEL);
+
+	pr_debug("HS USB OTG: revision 0x%x, sysconfig 0x%02x, "
+			"sysstatus 0x%x, intrfsel 0x%x, simenable  0x%x\n",
+			omap_readl(OTG_REVISION), omap_readl(OTG_SYSCONFIG),
+			omap_readl(OTG_SYSSTATUS), omap_readl(OTG_INTERFSEL),
+			omap_readl(OTG_SIMENABLE));
+
+	omap_vbus_power(musb, musb->board_mode == MUSB_HOST, 1);
+
+	if (is_host_enabled(musb))
+		musb->board_set_vbus = omap_set_vbus;
+	if (is_peripheral_enabled(musb))
+		musb->xceiv.set_power = omap_set_power;
+	musb->a_wait_bcon = MUSB_TIMEOUT_A_WAIT_BCON;
+
+	setup_timer(&musb_idle_timer, musb_do_idle, (unsigned long) musb);
+
+	return 0;
+}
+
+int musb_platform_suspend(struct musb *musb)
+{
+	u32 l;
+
+	if (!musb->clock)
+		return 0;
+
+	/* in any role */
+	l = omap_readl(OTG_FORCESTDBY);
+	l |= ENABLEFORCE;	/* enable MSTANDBY */
+	omap_writel(l, OTG_FORCESTDBY);
+
+	l = omap_readl(OTG_SYSCONFIG);
+	l |= ENABLEWAKEUP;	/* enable wakeup */
+	omap_writel(l, OTG_SYSCONFIG);
+
+	if (musb->xceiv.set_suspend)
+		musb->xceiv.set_suspend(&musb->xceiv, 1);
+
+	if (musb->set_clock)
+		musb->set_clock(musb->clock, 0);
+	else
+		clk_disable(musb->clock);
+
+	return 0;
+}
+
+static int musb_platform_resume(struct musb *musb)
+{
+	u32 l;
+
+	if (!musb->clock)
+		return 0;
+
+	if (musb->xceiv.set_suspend)
+		musb->xceiv.set_suspend(&musb->xceiv, 0);
+
+	if (musb->set_clock)
+		musb->set_clock(musb->clock, 1);
+	else
+		clk_enable(musb->clock);
+
+	l = omap_readl(OTG_SYSCONFIG);
+	l &= ~ENABLEWAKEUP;	/* disable wakeup */
+	omap_writel(l, OTG_SYSCONFIG);
+
+	l = omap_readl(OTG_FORCESTDBY);
+	l &= ~ENABLEFORCE;	/* disable MSTANDBY */
+	omap_writel(l, OTG_FORCESTDBY);
+
+	return 0;
+}
+
+
+int musb_platform_exit(struct musb *musb)
+{
+
+	omap_vbus_power(musb, 0 /*off*/, 1);
+
+	musb_platform_suspend(musb);
+
+	clk_put(musb->clock);
+	musb->clock = 0;
+
+	return 0;
+}
diff --git a/drivers/usb/musb/omap2430.h b/drivers/usb/musb/omap2430.h
new file mode 100644
index 000000000000..786a62071f72
--- /dev/null
+++ b/drivers/usb/musb/omap2430.h
@@ -0,0 +1,56 @@
+/*
+ * Copyright (C) 2005-2006 by Texas Instruments
+ *
+ * The Inventra Controller Driver for Linux is free software; you
+ * can redistribute it and/or modify it under the terms of the GNU
+ * General Public License version 2 as published by the Free Software
+ * Foundation.
+ */
+
+#ifndef __MUSB_OMAP243X_H__
+#define __MUSB_OMAP243X_H__
+
+#if defined(CONFIG_ARCH_OMAP2430) || defined(CONFIG_ARCH_OMAP3430)
+#include <asm/arch/hardware.h>
+#include <asm/arch/usb.h>
+
+/*
+ * OMAP2430-specific definitions
+ */
+
+#define MENTOR_BASE_OFFSET	0
+#if	defined(CONFIG_ARCH_OMAP2430)
+#define	OMAP_HSOTG_BASE		(OMAP243X_HS_BASE)
+#elif	defined(CONFIG_ARCH_OMAP3430)
+#define	OMAP_HSOTG_BASE		(OMAP34XX_HSUSB_OTG_BASE)
+#endif
+#define OMAP_HSOTG(offset)	(OMAP_HSOTG_BASE + 0x400 + (offset))
+#define OTG_REVISION		OMAP_HSOTG(0x0)
+#define OTG_SYSCONFIG		OMAP_HSOTG(0x4)
+#	define	MIDLEMODE	12	/* bit position */
+#	define	FORCESTDBY		(0 << MIDLEMODE)
+#	define	NOSTDBY			(1 << MIDLEMODE)
+#	define	SMARTSTDBY		(2 << MIDLEMODE)
+#	define	SIDLEMODE		3	/* bit position */
+#	define	FORCEIDLE		(0 << SIDLEMODE)
+#	define	NOIDLE			(1 << SIDLEMODE)
+#	define	SMARTIDLE		(2 << SIDLEMODE)
+#	define	ENABLEWAKEUP		(1 << 2)
+#	define	SOFTRST			(1 << 1)
+#	define	AUTOIDLE		(1 << 0)
+#define OTG_SYSSTATUS		OMAP_HSOTG(0x8)
+#	define	RESETDONE		(1 << 0)
+#define OTG_INTERFSEL		OMAP_HSOTG(0xc)
+#	define	EXTCP			(1 << 2)
+#	define	PHYSEL		0	/* bit position */
+#	define	UTMI_8BIT		(0 << PHYSEL)
+#	define	ULPI_12PIN		(1 << PHYSEL)
+#	define	ULPI_8PIN		(2 << PHYSEL)
+#define OTG_SIMENABLE		OMAP_HSOTG(0x10)
+#	define	TM1			(1 << 0)
+#define OTG_FORCESTDBY		OMAP_HSOTG(0x14)
+#	define	ENABLEFORCE		(1 << 0)
+
+#endif	/* CONFIG_ARCH_OMAP2430 */
+
+#endif	/* __MUSB_OMAP243X_H__ */
diff --git a/drivers/usb/musb/tusb6010.c b/drivers/usb/musb/tusb6010.c
new file mode 100644
index 000000000000..b73b036f3d77
--- /dev/null
+++ b/drivers/usb/musb/tusb6010.c
@@ -0,0 +1,1151 @@
+/*
+ * TUSB6010 USB 2.0 OTG Dual Role controller
+ *
+ * Copyright (C) 2006 Nokia Corporation
+ * Jarkko Nikula <jarkko.nikula@nokia.com>
+ * Tony Lindgren <tony@atomide.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Notes:
+ * - Driver assumes that interface to external host (main CPU) is
+ *   configured for NOR FLASH interface instead of VLYNQ serial
+ *   interface.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/usb.h>
+#include <linux/irq.h>
+#include <linux/platform_device.h>
+
+#include "musb_core.h"
+
+static void tusb_source_power(struct musb *musb, int is_on);
+
+#define TUSB_REV_MAJOR(reg_val)		((reg_val >> 4) & 0xf)
+#define TUSB_REV_MINOR(reg_val)		(reg_val & 0xf)
+
+/*
+ * Checks the revision. We need to use the DMA register as 3.0 does not
+ * have correct versions for TUSB_PRCM_REV or TUSB_INT_CTRL_REV.
+ */
+u8 tusb_get_revision(struct musb *musb)
+{
+	void __iomem	*tbase = musb->ctrl_base;
+	u32		die_id;
+	u8		rev;
+
+	rev = musb_readl(tbase, TUSB_DMA_CTRL_REV) & 0xff;
+	if (TUSB_REV_MAJOR(rev) == 3) {
+		die_id = TUSB_DIDR1_HI_CHIP_REV(musb_readl(tbase,
+				TUSB_DIDR1_HI));
+		if (die_id >= TUSB_DIDR1_HI_REV_31)
+			rev |= 1;
+	}
+
+	return rev;
+}
+
+static int __init tusb_print_revision(struct musb *musb)
+{
+	void __iomem	*tbase = musb->ctrl_base;
+	u8		rev;
+
+	rev = tusb_get_revision(musb);
+
+	pr_info("tusb: %s%i.%i %s%i.%i %s%i.%i %s%i.%i %s%i %s%i.%i\n",
+		"prcm",
+		TUSB_REV_MAJOR(musb_readl(tbase, TUSB_PRCM_REV)),
+		TUSB_REV_MINOR(musb_readl(tbase, TUSB_PRCM_REV)),
+		"int",
+		TUSB_REV_MAJOR(musb_readl(tbase, TUSB_INT_CTRL_REV)),
+		TUSB_REV_MINOR(musb_readl(tbase, TUSB_INT_CTRL_REV)),
+		"gpio",
+		TUSB_REV_MAJOR(musb_readl(tbase, TUSB_GPIO_REV)),
+		TUSB_REV_MINOR(musb_readl(tbase, TUSB_GPIO_REV)),
+		"dma",
+		TUSB_REV_MAJOR(musb_readl(tbase, TUSB_DMA_CTRL_REV)),
+		TUSB_REV_MINOR(musb_readl(tbase, TUSB_DMA_CTRL_REV)),
+		"dieid",
+		TUSB_DIDR1_HI_CHIP_REV(musb_readl(tbase, TUSB_DIDR1_HI)),
+		"rev",
+		TUSB_REV_MAJOR(rev), TUSB_REV_MINOR(rev));
+
+	return tusb_get_revision(musb);
+}
+
+#define WBUS_QUIRK_MASK	(TUSB_PHY_OTG_CTRL_TESTM2 | TUSB_PHY_OTG_CTRL_TESTM1 \
+				| TUSB_PHY_OTG_CTRL_TESTM0)
+
+/*
+ * Workaround for spontaneous WBUS wake-up issue #2 for tusb3.0.
+ * Disables power detection in PHY for the duration of idle.
+ */
+static void tusb_wbus_quirk(struct musb *musb, int enabled)
+{
+	void __iomem	*tbase = musb->ctrl_base;
+	static u32	phy_otg_ctrl, phy_otg_ena;
+	u32		tmp;
+
+	if (enabled) {
+		phy_otg_ctrl = musb_readl(tbase, TUSB_PHY_OTG_CTRL);
+		phy_otg_ena = musb_readl(tbase, TUSB_PHY_OTG_CTRL_ENABLE);
+		tmp = TUSB_PHY_OTG_CTRL_WRPROTECT
+				| phy_otg_ena | WBUS_QUIRK_MASK;
+		musb_writel(tbase, TUSB_PHY_OTG_CTRL, tmp);
+		tmp = phy_otg_ena & ~WBUS_QUIRK_MASK;
+		tmp |= TUSB_PHY_OTG_CTRL_WRPROTECT | TUSB_PHY_OTG_CTRL_TESTM2;
+		musb_writel(tbase, TUSB_PHY_OTG_CTRL_ENABLE, tmp);
+		DBG(2, "Enabled tusb wbus quirk ctrl %08x ena %08x\n",
+			musb_readl(tbase, TUSB_PHY_OTG_CTRL),
+			musb_readl(tbase, TUSB_PHY_OTG_CTRL_ENABLE));
+	} else if (musb_readl(tbase, TUSB_PHY_OTG_CTRL_ENABLE)
+					& TUSB_PHY_OTG_CTRL_TESTM2) {
+		tmp = TUSB_PHY_OTG_CTRL_WRPROTECT | phy_otg_ctrl;
+		musb_writel(tbase, TUSB_PHY_OTG_CTRL, tmp);
+		tmp = TUSB_PHY_OTG_CTRL_WRPROTECT | phy_otg_ena;
+		musb_writel(tbase, TUSB_PHY_OTG_CTRL_ENABLE, tmp);
+		DBG(2, "Disabled tusb wbus quirk ctrl %08x ena %08x\n",
+			musb_readl(tbase, TUSB_PHY_OTG_CTRL),
+			musb_readl(tbase, TUSB_PHY_OTG_CTRL_ENABLE));
+		phy_otg_ctrl = 0;
+		phy_otg_ena = 0;
+	}
+}
+
+/*
+ * TUSB 6010 may use a parallel bus that doesn't support byte ops;
+ * so both loading and unloading FIFOs need explicit byte counts.
+ */
+
+static inline void
+tusb_fifo_write_unaligned(void __iomem *fifo, const u8 *buf, u16 len)
+{
+	u32		val;
+	int		i;
+
+	if (len > 4) {
+		for (i = 0; i < (len >> 2); i++) {
+			memcpy(&val, buf, 4);
+			musb_writel(fifo, 0, val);
+			buf += 4;
+		}
+		len %= 4;
+	}
+	if (len > 0) {
+		/* Write the rest 1 - 3 bytes to FIFO */
+		memcpy(&val, buf, len);
+		musb_writel(fifo, 0, val);
+	}
+}
+
+static inline void tusb_fifo_read_unaligned(void __iomem *fifo,
+						void __iomem *buf, u16 len)
+{
+	u32		val;
+	int		i;
+
+	if (len > 4) {
+		for (i = 0; i < (len >> 2); i++) {
+			val = musb_readl(fifo, 0);
+			memcpy(buf, &val, 4);
+			buf += 4;
+		}
+		len %= 4;
+	}
+	if (len > 0) {
+		/* Read the rest 1 - 3 bytes from FIFO */
+		val = musb_readl(fifo, 0);
+		memcpy(buf, &val, len);
+	}
+}
+
+void musb_write_fifo(struct musb_hw_ep *hw_ep, u16 len, const u8 *buf)
+{
+	void __iomem	*ep_conf = hw_ep->conf;
+	void __iomem	*fifo = hw_ep->fifo;
+	u8		epnum = hw_ep->epnum;
+
+	prefetch(buf);
+
+	DBG(4, "%cX ep%d fifo %p count %d buf %p\n",
+			'T', epnum, fifo, len, buf);
+
+	if (epnum)
+		musb_writel(ep_conf, TUSB_EP_TX_OFFSET,
+			TUSB_EP_CONFIG_XFR_SIZE(len));
+	else
+		musb_writel(ep_conf, 0, TUSB_EP0_CONFIG_DIR_TX |
+			TUSB_EP0_CONFIG_XFR_SIZE(len));
+
+	if (likely((0x01 & (unsigned long) buf) == 0)) {
+
+		/* Best case is 32bit-aligned destination address */
+		if ((0x02 & (unsigned long) buf) == 0) {
+			if (len >= 4) {
+				writesl(fifo, buf, len >> 2);
+				buf += (len & ~0x03);
+				len &= 0x03;
+			}
+		} else {
+			if (len >= 2) {
+				u32 val;
+				int i;
+
+				/* Cannot use writesw, fifo is 32-bit */
+				for (i = 0; i < (len >> 2); i++) {
+					val = (u32)(*(u16 *)buf);
+					buf += 2;
+					val |= (*(u16 *)buf) << 16;
+					buf += 2;
+					musb_writel(fifo, 0, val);
+				}
+				len &= 0x03;
+			}
+		}
+	}
+
+	if (len > 0)
+		tusb_fifo_write_unaligned(fifo, buf, len);
+}
+
+void musb_read_fifo(struct musb_hw_ep *hw_ep, u16 len, u8 *buf)
+{
+	void __iomem	*ep_conf = hw_ep->conf;
+	void __iomem	*fifo = hw_ep->fifo;
+	u8		epnum = hw_ep->epnum;
+
+	DBG(4, "%cX ep%d fifo %p count %d buf %p\n",
+			'R', epnum, fifo, len, buf);
+
+	if (epnum)
+		musb_writel(ep_conf, TUSB_EP_RX_OFFSET,
+			TUSB_EP_CONFIG_XFR_SIZE(len));
+	else
+		musb_writel(ep_conf, 0, TUSB_EP0_CONFIG_XFR_SIZE(len));
+
+	if (likely((0x01 & (unsigned long) buf) == 0)) {
+
+		/* Best case is 32bit-aligned destination address */
+		if ((0x02 & (unsigned long) buf) == 0) {
+			if (len >= 4) {
+				readsl(fifo, buf, len >> 2);
+				buf += (len & ~0x03);
+				len &= 0x03;
+			}
+		} else {
+			if (len >= 2) {
+				u32 val;
+				int i;
+
+				/* Cannot use readsw, fifo is 32-bit */
+				for (i = 0; i < (len >> 2); i++) {
+					val = musb_readl(fifo, 0);
+					*(u16 *)buf = (u16)(val & 0xffff);
+					buf += 2;
+					*(u16 *)buf = (u16)(val >> 16);
+					buf += 2;
+				}
+				len &= 0x03;
+			}
+		}
+	}
+
+	if (len > 0)
+		tusb_fifo_read_unaligned(fifo, buf, len);
+}
+
+#ifdef CONFIG_USB_GADGET_MUSB_HDRC
+
+/* This is used by gadget drivers, and OTG transceiver logic, allowing
+ * at most mA current to be drawn from VBUS during a Default-B session
+ * (that is, while VBUS exceeds 4.4V).  In Default-A (including pure host
+ * mode), or low power Default-B sessions, something else supplies power.
+ * Caller must take care of locking.
+ */
+static int tusb_draw_power(struct otg_transceiver *x, unsigned mA)
+{
+	struct musb	*musb = container_of(x, struct musb, xceiv);
+	void __iomem	*tbase = musb->ctrl_base;
+	u32		reg;
+
+	/*
+	 * Keep clock active when enabled. Note that this is not tied to
+	 * drawing VBUS, as with OTG mA can be less than musb->min_power.
+	 */
+	if (musb->set_clock) {
+		if (mA)
+			musb->set_clock(musb->clock, 1);
+		else
+			musb->set_clock(musb->clock, 0);
+	}
+
+	/* tps65030 seems to consume max 100mA, with maybe 60mA available
+	 * (measured on one board) for things other than tps and tusb.
+	 *
+	 * Boards sharing the CPU clock with CLKIN will need to prevent
+	 * certain idle sleep states while the USB link is active.
+	 *
+	 * REVISIT we could use VBUS to supply only _one_ of { 1.5V, 3.3V }.
+	 * The actual current usage would be very board-specific.  For now,
+	 * it's simpler to just use an aggregate (also board-specific).
+	 */
+	if (x->default_a || mA < (musb->min_power << 1))
+		mA = 0;
+
+	reg = musb_readl(tbase, TUSB_PRCM_MNGMT);
+	if (mA) {
+		musb->is_bus_powered = 1;
+		reg |= TUSB_PRCM_MNGMT_15_SW_EN | TUSB_PRCM_MNGMT_33_SW_EN;
+	} else {
+		musb->is_bus_powered = 0;
+		reg &= ~(TUSB_PRCM_MNGMT_15_SW_EN | TUSB_PRCM_MNGMT_33_SW_EN);
+	}
+	musb_writel(tbase, TUSB_PRCM_MNGMT, reg);
+
+	DBG(2, "draw max %d mA VBUS\n", mA);
+	return 0;
+}
+
+#else
+#define tusb_draw_power	NULL
+#endif
+
+/* workaround for issue 13:  change clock during chip idle
+ * (to be fixed in rev3 silicon) ... symptoms include disconnect
+ * or looping suspend/resume cycles
+ */
+static void tusb_set_clock_source(struct musb *musb, unsigned mode)
+{
+	void __iomem	*tbase = musb->ctrl_base;
+	u32		reg;
+
+	reg = musb_readl(tbase, TUSB_PRCM_CONF);
+	reg &= ~TUSB_PRCM_CONF_SYS_CLKSEL(0x3);
+
+	/* 0 = refclk (clkin, XI)
+	 * 1 = PHY 60 MHz (internal PLL)
+	 * 2 = not supported
+	 * 3 = what?
+	 */
+	if (mode > 0)
+		reg |= TUSB_PRCM_CONF_SYS_CLKSEL(mode & 0x3);
+
+	musb_writel(tbase, TUSB_PRCM_CONF, reg);
+
+	/* FIXME tusb6010_platform_retime(mode == 0); */
+}
+
+/*
+ * Idle TUSB6010 until next wake-up event; NOR access always wakes.
+ * Other code ensures that we idle unless we're connected _and_ the
+ * USB link is not suspended ... and tells us the relevant wakeup
+ * events.  SW_EN for voltage is handled separately.
+ */
+void tusb_allow_idle(struct musb *musb, u32 wakeup_enables)
+{
+	void __iomem	*tbase = musb->ctrl_base;
+	u32		reg;
+
+	if ((wakeup_enables & TUSB_PRCM_WBUS)
+			&& (tusb_get_revision(musb) == TUSB_REV_30))
+		tusb_wbus_quirk(musb, 1);
+
+	tusb_set_clock_source(musb, 0);
+
+	wakeup_enables |= TUSB_PRCM_WNORCS;
+	musb_writel(tbase, TUSB_PRCM_WAKEUP_MASK, ~wakeup_enables);
+
+	/* REVISIT writeup of WID implies that if WID set and ID is grounded,
+	 * TUSB_PHY_OTG_CTRL.TUSB_PHY_OTG_CTRL_OTG_ID_PULLUP must be cleared.
+	 * Presumably that's mostly to save power, hence WID is immaterial ...
+	 */
+
+	reg = musb_readl(tbase, TUSB_PRCM_MNGMT);
+	/* issue 4: when driving vbus, use hipower (vbus_det) comparator */
+	if (is_host_active(musb)) {
+		reg |= TUSB_PRCM_MNGMT_OTG_VBUS_DET_EN;
+		reg &= ~TUSB_PRCM_MNGMT_OTG_SESS_END_EN;
+	} else {
+		reg |= TUSB_PRCM_MNGMT_OTG_SESS_END_EN;
+		reg &= ~TUSB_PRCM_MNGMT_OTG_VBUS_DET_EN;
+	}
+	reg |= TUSB_PRCM_MNGMT_PM_IDLE | TUSB_PRCM_MNGMT_DEV_IDLE;
+	musb_writel(tbase, TUSB_PRCM_MNGMT, reg);
+
+	DBG(6, "idle, wake on %02x\n", wakeup_enables);
+}
+
+/*
+ * Updates cable VBUS status. Caller must take care of locking.
+ */
+int musb_platform_get_vbus_status(struct musb *musb)
+{
+	void __iomem	*tbase = musb->ctrl_base;
+	u32		otg_stat, prcm_mngmt;
+	int		ret = 0;
+
+	otg_stat = musb_readl(tbase, TUSB_DEV_OTG_STAT);
+	prcm_mngmt = musb_readl(tbase, TUSB_PRCM_MNGMT);
+
+	/* Temporarily enable VBUS detection if it was disabled for
+	 * suspend mode. Unless it's enabled otg_stat and devctl will
+	 * not show correct VBUS state.
+	 */
+	if (!(prcm_mngmt & TUSB_PRCM_MNGMT_OTG_VBUS_DET_EN)) {
+		u32 tmp = prcm_mngmt;
+		tmp |= TUSB_PRCM_MNGMT_OTG_VBUS_DET_EN;
+		musb_writel(tbase, TUSB_PRCM_MNGMT, tmp);
+		otg_stat = musb_readl(tbase, TUSB_DEV_OTG_STAT);
+		musb_writel(tbase, TUSB_PRCM_MNGMT, prcm_mngmt);
+	}
+
+	if (otg_stat & TUSB_DEV_OTG_STAT_VBUS_VALID)
+		ret = 1;
+
+	return ret;
+}
+
+static struct timer_list musb_idle_timer;
+
+static void musb_do_idle(unsigned long _musb)
+{
+	struct musb	*musb = (void *)_musb;
+	unsigned long	flags;
+
+	spin_lock_irqsave(&musb->lock, flags);
+
+	switch (musb->xceiv.state) {
+	case OTG_STATE_A_WAIT_BCON:
+		if ((musb->a_wait_bcon != 0)
+			&& (musb->idle_timeout == 0
+				|| time_after(jiffies, musb->idle_timeout))) {
+			DBG(4, "Nothing connected %s, turning off VBUS\n",
+					otg_state_string(musb));
+		}
+		/* FALLTHROUGH */
+	case OTG_STATE_A_IDLE:
+		tusb_source_power(musb, 0);
+	default:
+		break;
+	}
+
+	if (!musb->is_active) {
+		u32	wakeups;
+
+		/* wait until khubd handles port change status */
+		if (is_host_active(musb) && (musb->port1_status >> 16))
+			goto done;
+
+#ifdef CONFIG_USB_GADGET_MUSB_HDRC
+		if (is_peripheral_enabled(musb) && !musb->gadget_driver)
+			wakeups = 0;
+		else {
+			wakeups = TUSB_PRCM_WHOSTDISCON
+					| TUSB_PRCM_WBUS
+					| TUSB_PRCM_WVBUS;
+			if (is_otg_enabled(musb))
+				wakeups |= TUSB_PRCM_WID;
+		}
+#else
+		wakeups = TUSB_PRCM_WHOSTDISCON | TUSB_PRCM_WBUS;
+#endif
+		tusb_allow_idle(musb, wakeups);
+	}
+done:
+	spin_unlock_irqrestore(&musb->lock, flags);
+}
+
+/*
+ * Maybe put TUSB6010 into idle mode mode depending on USB link status,
+ * like "disconnected" or "suspended".  We'll be woken out of it by
+ * connect, resume, or disconnect.
+ *
+ * Needs to be called as the last function everywhere where there is
+ * register access to TUSB6010 because of NOR flash wake-up.
+ * Caller should own controller spinlock.
+ *
+ * Delay because peripheral enables D+ pullup 3msec after SE0, and
+ * we don't want to treat that full speed J as a wakeup event.
+ * ... peripherals must draw only suspend current after 10 msec.
+ */
+void musb_platform_try_idle(struct musb *musb, unsigned long timeout)
+{
+	unsigned long		default_timeout = jiffies + msecs_to_jiffies(3);
+	static unsigned long	last_timer;
+
+	if (timeout == 0)
+		timeout = default_timeout;
+
+	/* Never idle if active, or when VBUS timeout is not set as host */
+	if (musb->is_active || ((musb->a_wait_bcon == 0)
+			&& (musb->xceiv.state == OTG_STATE_A_WAIT_BCON))) {
+		DBG(4, "%s active, deleting timer\n", otg_state_string(musb));
+		del_timer(&musb_idle_timer);
+		last_timer = jiffies;
+		return;
+	}
+
+	if (time_after(last_timer, timeout)) {
+		if (!timer_pending(&musb_idle_timer))
+			last_timer = timeout;
+		else {
+			DBG(4, "Longer idle timer already pending, ignoring\n");
+			return;
+		}
+	}
+	last_timer = timeout;
+
+	DBG(4, "%s inactive, for idle timer for %lu ms\n",
+		otg_state_string(musb),
+		(unsigned long)jiffies_to_msecs(timeout - jiffies));
+	mod_timer(&musb_idle_timer, timeout);
+}
+
+/* ticks of 60 MHz clock */
+#define DEVCLOCK		60000000
+#define OTG_TIMER_MS(msecs)	((msecs) \
+		? (TUSB_DEV_OTG_TIMER_VAL((DEVCLOCK/1000)*(msecs)) \
+				| TUSB_DEV_OTG_TIMER_ENABLE) \
+		: 0)
+
+static void tusb_source_power(struct musb *musb, int is_on)
+{
+	void __iomem	*tbase = musb->ctrl_base;
+	u32		conf, prcm, timer;
+	u8		devctl;
+
+	/* HDRC controls CPEN, but beware current surges during device
+	 * connect.  They can trigger transient overcurrent conditions
+	 * that must be ignored.
+	 */
+
+	prcm = musb_readl(tbase, TUSB_PRCM_MNGMT);
+	conf = musb_readl(tbase, TUSB_DEV_CONF);
+	devctl = musb_readb(musb->mregs, MUSB_DEVCTL);
+
+	if (is_on) {
+		if (musb->set_clock)
+			musb->set_clock(musb->clock, 1);
+		timer = OTG_TIMER_MS(OTG_TIME_A_WAIT_VRISE);
+		musb->xceiv.default_a = 1;
+		musb->xceiv.state = OTG_STATE_A_WAIT_VRISE;
+		devctl |= MUSB_DEVCTL_SESSION;
+
+		conf |= TUSB_DEV_CONF_USB_HOST_MODE;
+		MUSB_HST_MODE(musb);
+	} else {
+		u32	otg_stat;
+
+		timer = 0;
+
+		/* If ID pin is grounded, we want to be a_idle */
+		otg_stat = musb_readl(tbase, TUSB_DEV_OTG_STAT);
+		if (!(otg_stat & TUSB_DEV_OTG_STAT_ID_STATUS)) {
+			switch (musb->xceiv.state) {
+			case OTG_STATE_A_WAIT_VRISE:
+			case OTG_STATE_A_WAIT_BCON:
+				musb->xceiv.state = OTG_STATE_A_WAIT_VFALL;
+				break;
+			case OTG_STATE_A_WAIT_VFALL:
+				musb->xceiv.state = OTG_STATE_A_IDLE;
+				break;
+			default:
+				musb->xceiv.state = OTG_STATE_A_IDLE;
+			}
+			musb->is_active = 0;
+			musb->xceiv.default_a = 1;
+			MUSB_HST_MODE(musb);
+		} else {
+			musb->is_active = 0;
+			musb->xceiv.default_a = 0;
+			musb->xceiv.state = OTG_STATE_B_IDLE;
+			MUSB_DEV_MODE(musb);
+		}
+
+		devctl &= ~MUSB_DEVCTL_SESSION;
+		conf &= ~TUSB_DEV_CONF_USB_HOST_MODE;
+		if (musb->set_clock)
+			musb->set_clock(musb->clock, 0);
+	}
+	prcm &= ~(TUSB_PRCM_MNGMT_15_SW_EN | TUSB_PRCM_MNGMT_33_SW_EN);
+
+	musb_writel(tbase, TUSB_PRCM_MNGMT, prcm);
+	musb_writel(tbase, TUSB_DEV_OTG_TIMER, timer);
+	musb_writel(tbase, TUSB_DEV_CONF, conf);
+	musb_writeb(musb->mregs, MUSB_DEVCTL, devctl);
+
+	DBG(1, "VBUS %s, devctl %02x otg %3x conf %08x prcm %08x\n",
+		otg_state_string(musb),
+		musb_readb(musb->mregs, MUSB_DEVCTL),
+		musb_readl(tbase, TUSB_DEV_OTG_STAT),
+		conf, prcm);
+}
+
+/*
+ * Sets the mode to OTG, peripheral or host by changing the ID detection.
+ * Caller must take care of locking.
+ *
+ * Note that if a mini-A cable is plugged in the ID line will stay down as
+ * the weak ID pull-up is not able to pull the ID up.
+ *
+ * REVISIT: It would be possible to add support for changing between host
+ * and peripheral modes in non-OTG configurations by reconfiguring hardware
+ * and then setting musb->board_mode. For now, only support OTG mode.
+ */
+void musb_platform_set_mode(struct musb *musb, u8 musb_mode)
+{
+	void __iomem	*tbase = musb->ctrl_base;
+	u32		otg_stat, phy_otg_ctrl, phy_otg_ena, dev_conf;
+
+	if (musb->board_mode != MUSB_OTG) {
+		ERR("Changing mode currently only supported in OTG mode\n");
+		return;
+	}
+
+	otg_stat = musb_readl(tbase, TUSB_DEV_OTG_STAT);
+	phy_otg_ctrl = musb_readl(tbase, TUSB_PHY_OTG_CTRL);
+	phy_otg_ena = musb_readl(tbase, TUSB_PHY_OTG_CTRL_ENABLE);
+	dev_conf = musb_readl(tbase, TUSB_DEV_CONF);
+
+	switch (musb_mode) {
+
+#ifdef CONFIG_USB_MUSB_HDRC_HCD
+	case MUSB_HOST:		/* Disable PHY ID detect, ground ID */
+		phy_otg_ctrl &= ~TUSB_PHY_OTG_CTRL_OTG_ID_PULLUP;
+		phy_otg_ena |= TUSB_PHY_OTG_CTRL_OTG_ID_PULLUP;
+		dev_conf |= TUSB_DEV_CONF_ID_SEL;
+		dev_conf &= ~TUSB_DEV_CONF_SOFT_ID;
+		break;
+#endif
+
+#ifdef CONFIG_USB_GADGET_MUSB_HDRC
+	case MUSB_PERIPHERAL:	/* Disable PHY ID detect, keep ID pull-up on */
+		phy_otg_ctrl |= TUSB_PHY_OTG_CTRL_OTG_ID_PULLUP;
+		phy_otg_ena |= TUSB_PHY_OTG_CTRL_OTG_ID_PULLUP;
+		dev_conf |= (TUSB_DEV_CONF_ID_SEL | TUSB_DEV_CONF_SOFT_ID);
+		break;
+#endif
+
+#ifdef CONFIG_USB_MUSB_OTG
+	case MUSB_OTG:		/* Use PHY ID detection */
+		phy_otg_ctrl |= TUSB_PHY_OTG_CTRL_OTG_ID_PULLUP;
+		phy_otg_ena |= TUSB_PHY_OTG_CTRL_OTG_ID_PULLUP;
+		dev_conf &= ~(TUSB_DEV_CONF_ID_SEL | TUSB_DEV_CONF_SOFT_ID);
+		break;
+#endif
+
+	default:
+		DBG(2, "Trying to set unknown mode %i\n", musb_mode);
+	}
+
+	musb_writel(tbase, TUSB_PHY_OTG_CTRL,
+			TUSB_PHY_OTG_CTRL_WRPROTECT | phy_otg_ctrl);
+	musb_writel(tbase, TUSB_PHY_OTG_CTRL_ENABLE,
+			TUSB_PHY_OTG_CTRL_WRPROTECT | phy_otg_ena);
+	musb_writel(tbase, TUSB_DEV_CONF, dev_conf);
+
+	otg_stat = musb_readl(tbase, TUSB_DEV_OTG_STAT);
+	if ((musb_mode == MUSB_PERIPHERAL) &&
+		!(otg_stat & TUSB_DEV_OTG_STAT_ID_STATUS))
+			INFO("Cannot be peripheral with mini-A cable "
+			"otg_stat: %08x\n", otg_stat);
+}
+
+static inline unsigned long
+tusb_otg_ints(struct musb *musb, u32 int_src, void __iomem *tbase)
+{
+	u32		otg_stat = musb_readl(tbase, TUSB_DEV_OTG_STAT);
+	unsigned long	idle_timeout = 0;
+
+	/* ID pin */
+	if ((int_src & TUSB_INT_SRC_ID_STATUS_CHNG)) {
+		int	default_a;
+
+		if (is_otg_enabled(musb))
+			default_a = !(otg_stat & TUSB_DEV_OTG_STAT_ID_STATUS);
+		else
+			default_a = is_host_enabled(musb);
+		DBG(2, "Default-%c\n", default_a ? 'A' : 'B');
+		musb->xceiv.default_a = default_a;
+		tusb_source_power(musb, default_a);
+
+		/* Don't allow idling immediately */
+		if (default_a)
+			idle_timeout = jiffies + (HZ * 3);
+	}
+
+	/* VBUS state change */
+	if (int_src & TUSB_INT_SRC_VBUS_SENSE_CHNG) {
+
+		/* B-dev state machine:  no vbus ~= disconnect */
+		if ((is_otg_enabled(musb) && !musb->xceiv.default_a)
+				|| !is_host_enabled(musb)) {
+#ifdef CONFIG_USB_MUSB_HDRC_HCD
+			/* ? musb_root_disconnect(musb); */
+			musb->port1_status &=
+				~(USB_PORT_STAT_CONNECTION
+				| USB_PORT_STAT_ENABLE
+				| USB_PORT_STAT_LOW_SPEED
+				| USB_PORT_STAT_HIGH_SPEED
+				| USB_PORT_STAT_TEST
+				);
+#endif
+
+			if (otg_stat & TUSB_DEV_OTG_STAT_SESS_END) {
+				DBG(1, "Forcing disconnect (no interrupt)\n");
+				if (musb->xceiv.state != OTG_STATE_B_IDLE) {
+					/* INTR_DISCONNECT can hide... */
+					musb->xceiv.state = OTG_STATE_B_IDLE;
+					musb->int_usb |= MUSB_INTR_DISCONNECT;
+				}
+				musb->is_active = 0;
+			}
+			DBG(2, "vbus change, %s, otg %03x\n",
+				otg_state_string(musb), otg_stat);
+			idle_timeout = jiffies + (1 * HZ);
+			schedule_work(&musb->irq_work);
+
+		} else /* A-dev state machine */ {
+			DBG(2, "vbus change, %s, otg %03x\n",
+				otg_state_string(musb), otg_stat);
+
+			switch (musb->xceiv.state) {
+			case OTG_STATE_A_IDLE:
+				DBG(2, "Got SRP, turning on VBUS\n");
+				musb_set_vbus(musb, 1);
+
+				/* CONNECT can wake if a_wait_bcon is set */
+				if (musb->a_wait_bcon != 0)
+					musb->is_active = 0;
+				else
+					musb->is_active = 1;
+
+				/*
+				 * OPT FS A TD.4.6 needs few seconds for
+				 * A_WAIT_VRISE
+				 */
+				idle_timeout = jiffies + (2 * HZ);
+
+				break;
+			case OTG_STATE_A_WAIT_VRISE:
+				/* ignore; A-session-valid < VBUS_VALID/2,
+				 * we monitor this with the timer
+				 */
+				break;
+			case OTG_STATE_A_WAIT_VFALL:
+				/* REVISIT this irq triggers during short
+				 * spikes caused by enumeration ...
+				 */
+				if (musb->vbuserr_retry) {
+					musb->vbuserr_retry--;
+					tusb_source_power(musb, 1);
+				} else {
+					musb->vbuserr_retry
+						= VBUSERR_RETRY_COUNT;
+					tusb_source_power(musb, 0);
+				}
+				break;
+			default:
+				break;
+			}
+		}
+	}
+
+	/* OTG timer expiration */
+	if (int_src & TUSB_INT_SRC_OTG_TIMEOUT) {
+		u8	devctl;
+
+		DBG(4, "%s timer, %03x\n", otg_state_string(musb), otg_stat);
+
+		switch (musb->xceiv.state) {
+		case OTG_STATE_A_WAIT_VRISE:
+			/* VBUS has probably been valid for a while now,
+			 * but may well have bounced out of range a bit
+			 */
+			devctl = musb_readb(musb->mregs, MUSB_DEVCTL);
+			if (otg_stat & TUSB_DEV_OTG_STAT_VBUS_VALID) {
+				if ((devctl & MUSB_DEVCTL_VBUS)
+						!= MUSB_DEVCTL_VBUS) {
+					DBG(2, "devctl %02x\n", devctl);
+					break;
+				}
+				musb->xceiv.state = OTG_STATE_A_WAIT_BCON;
+				musb->is_active = 0;
+				idle_timeout = jiffies
+					+ msecs_to_jiffies(musb->a_wait_bcon);
+			} else {
+				/* REVISIT report overcurrent to hub? */
+				ERR("vbus too slow, devctl %02x\n", devctl);
+				tusb_source_power(musb, 0);
+			}
+			break;
+		case OTG_STATE_A_WAIT_BCON:
+			if (musb->a_wait_bcon != 0)
+				idle_timeout = jiffies
+					+ msecs_to_jiffies(musb->a_wait_bcon);
+			break;
+		case OTG_STATE_A_SUSPEND:
+			break;
+		case OTG_STATE_B_WAIT_ACON:
+			break;
+		default:
+			break;
+		}
+	}
+	schedule_work(&musb->irq_work);
+
+	return idle_timeout;
+}
+
+static irqreturn_t tusb_interrupt(int irq, void *__hci)
+{
+	struct musb	*musb = __hci;
+	void __iomem	*tbase = musb->ctrl_base;
+	unsigned long	flags, idle_timeout = 0;
+	u32		int_mask, int_src;
+
+	spin_lock_irqsave(&musb->lock, flags);
+
+	/* Mask all interrupts to allow using both edge and level GPIO irq */
+	int_mask = musb_readl(tbase, TUSB_INT_MASK);
+	musb_writel(tbase, TUSB_INT_MASK, ~TUSB_INT_MASK_RESERVED_BITS);
+
+	int_src = musb_readl(tbase, TUSB_INT_SRC) & ~TUSB_INT_SRC_RESERVED_BITS;
+	DBG(3, "TUSB IRQ %08x\n", int_src);
+
+	musb->int_usb = (u8) int_src;
+
+	/* Acknowledge wake-up source interrupts */
+	if (int_src & TUSB_INT_SRC_DEV_WAKEUP) {
+		u32	reg;
+		u32	i;
+
+		if (tusb_get_revision(musb) == TUSB_REV_30)
+			tusb_wbus_quirk(musb, 0);
+
+		/* there are issues re-locking the PLL on wakeup ... */
+
+		/* work around issue 8 */
+		for (i = 0xf7f7f7; i > 0xf7f7f7 - 1000; i--) {
+			musb_writel(tbase, TUSB_SCRATCH_PAD, 0);
+			musb_writel(tbase, TUSB_SCRATCH_PAD, i);
+			reg = musb_readl(tbase, TUSB_SCRATCH_PAD);
+			if (reg == i)
+				break;
+			DBG(6, "TUSB NOR not ready\n");
+		}
+
+		/* work around issue 13 (2nd half) */
+		tusb_set_clock_source(musb, 1);
+
+		reg = musb_readl(tbase, TUSB_PRCM_WAKEUP_SOURCE);
+		musb_writel(tbase, TUSB_PRCM_WAKEUP_CLEAR, reg);
+		if (reg & ~TUSB_PRCM_WNORCS) {
+			musb->is_active = 1;
+			schedule_work(&musb->irq_work);
+		}
+		DBG(3, "wake %sactive %02x\n",
+				musb->is_active ? "" : "in", reg);
+
+		/* REVISIT host side TUSB_PRCM_WHOSTDISCON, TUSB_PRCM_WBUS */
+	}
+
+	if (int_src & TUSB_INT_SRC_USB_IP_CONN)
+		del_timer(&musb_idle_timer);
+
+	/* OTG state change reports (annoyingly) not issued by Mentor core */
+	if (int_src & (TUSB_INT_SRC_VBUS_SENSE_CHNG
+				| TUSB_INT_SRC_OTG_TIMEOUT
+				| TUSB_INT_SRC_ID_STATUS_CHNG))
+		idle_timeout = tusb_otg_ints(musb, int_src, tbase);
+
+	/* TX dma callback must be handled here, RX dma callback is
+	 * handled in tusb_omap_dma_cb.
+	 */
+	if ((int_src & TUSB_INT_SRC_TXRX_DMA_DONE)) {
+		u32	dma_src = musb_readl(tbase, TUSB_DMA_INT_SRC);
+		u32	real_dma_src = musb_readl(tbase, TUSB_DMA_INT_MASK);
+
+		DBG(3, "DMA IRQ %08x\n", dma_src);
+		real_dma_src = ~real_dma_src & dma_src;
+		if (tusb_dma_omap() && real_dma_src) {
+			int	tx_source = (real_dma_src & 0xffff);
+			int	i;
+
+			for (i = 1; i <= 15; i++) {
+				if (tx_source & (1 << i)) {
+					DBG(3, "completing ep%i %s\n", i, "tx");
+					musb_dma_completion(musb, i, 1);
+				}
+			}
+		}
+		musb_writel(tbase, TUSB_DMA_INT_CLEAR, dma_src);
+	}
+
+	/* EP interrupts. In OCP mode tusb6010 mirrors the MUSB interrupts */
+	if (int_src & (TUSB_INT_SRC_USB_IP_TX | TUSB_INT_SRC_USB_IP_RX)) {
+		u32	musb_src = musb_readl(tbase, TUSB_USBIP_INT_SRC);
+
+		musb_writel(tbase, TUSB_USBIP_INT_CLEAR, musb_src);
+		musb->int_rx = (((musb_src >> 16) & 0xffff) << 1);
+		musb->int_tx = (musb_src & 0xffff);
+	} else {
+		musb->int_rx = 0;
+		musb->int_tx = 0;
+	}
+
+	if (int_src & (TUSB_INT_SRC_USB_IP_TX | TUSB_INT_SRC_USB_IP_RX | 0xff))
+		musb_interrupt(musb);
+
+	/* Acknowledge TUSB interrupts. Clear only non-reserved bits */
+	musb_writel(tbase, TUSB_INT_SRC_CLEAR,
+		int_src & ~TUSB_INT_MASK_RESERVED_BITS);
+
+	musb_platform_try_idle(musb, idle_timeout);
+
+	musb_writel(tbase, TUSB_INT_MASK, int_mask);
+	spin_unlock_irqrestore(&musb->lock, flags);
+
+	return IRQ_HANDLED;
+}
+
+static int dma_off;
+
+/*
+ * Enables TUSB6010. Caller must take care of locking.
+ * REVISIT:
+ * - Check what is unnecessary in MGC_HdrcStart()
+ */
+void musb_platform_enable(struct musb *musb)
+{
+	void __iomem	*tbase = musb->ctrl_base;
+
+	/* Setup TUSB6010 main interrupt mask. Enable all interrupts except SOF.
+	 * REVISIT: Enable and deal with TUSB_INT_SRC_USB_IP_SOF */
+	musb_writel(tbase, TUSB_INT_MASK, TUSB_INT_SRC_USB_IP_SOF);
+
+	/* Setup TUSB interrupt, disable DMA and GPIO interrupts */
+	musb_writel(tbase, TUSB_USBIP_INT_MASK, 0);
+	musb_writel(tbase, TUSB_DMA_INT_MASK, 0x7fffffff);
+	musb_writel(tbase, TUSB_GPIO_INT_MASK, 0x1ff);
+
+	/* Clear all subsystem interrups */
+	musb_writel(tbase, TUSB_USBIP_INT_CLEAR, 0x7fffffff);
+	musb_writel(tbase, TUSB_DMA_INT_CLEAR, 0x7fffffff);
+	musb_writel(tbase, TUSB_GPIO_INT_CLEAR, 0x1ff);
+
+	/* Acknowledge pending interrupt(s) */
+	musb_writel(tbase, TUSB_INT_SRC_CLEAR, ~TUSB_INT_MASK_RESERVED_BITS);
+
+	/* Only 0 clock cycles for minimum interrupt de-assertion time and
+	 * interrupt polarity active low seems to work reliably here */
+	musb_writel(tbase, TUSB_INT_CTRL_CONF,
+			TUSB_INT_CTRL_CONF_INT_RELCYC(0));
+
+	set_irq_type(musb->nIrq, IRQ_TYPE_LEVEL_LOW);
+
+	/* maybe force into the Default-A OTG state machine */
+	if (!(musb_readl(tbase, TUSB_DEV_OTG_STAT)
+			& TUSB_DEV_OTG_STAT_ID_STATUS))
+		musb_writel(tbase, TUSB_INT_SRC_SET,
+				TUSB_INT_SRC_ID_STATUS_CHNG);
+
+	if (is_dma_capable() && dma_off)
+		printk(KERN_WARNING "%s %s: dma not reactivated\n",
+				__FILE__, __func__);
+	else
+		dma_off = 1;
+}
+
+/*
+ * Disables TUSB6010. Caller must take care of locking.
+ */
+void musb_platform_disable(struct musb *musb)
+{
+	void __iomem	*tbase = musb->ctrl_base;
+
+	/* FIXME stop DMA, IRQs, timers, ... */
+
+	/* disable all IRQs */
+	musb_writel(tbase, TUSB_INT_MASK, ~TUSB_INT_MASK_RESERVED_BITS);
+	musb_writel(tbase, TUSB_USBIP_INT_MASK, 0x7fffffff);
+	musb_writel(tbase, TUSB_DMA_INT_MASK, 0x7fffffff);
+	musb_writel(tbase, TUSB_GPIO_INT_MASK, 0x1ff);
+
+	del_timer(&musb_idle_timer);
+
+	if (is_dma_capable() && !dma_off) {
+		printk(KERN_WARNING "%s %s: dma still active\n",
+				__FILE__, __func__);
+		dma_off = 1;
+	}
+}
+
+/*
+ * Sets up TUSB6010 CPU interface specific signals and registers
+ * Note: Settings optimized for OMAP24xx
+ */
+static void __init tusb_setup_cpu_interface(struct musb *musb)
+{
+	void __iomem	*tbase = musb->ctrl_base;
+
+	/*
+	 * Disable GPIO[5:0] pullups (used as output DMA requests)
+	 * Don't disable GPIO[7:6] as they are needed for wake-up.
+	 */
+	musb_writel(tbase, TUSB_PULLUP_1_CTRL, 0x0000003F);
+
+	/* Disable all pullups on NOR IF, DMAREQ0 and DMAREQ1 */
+	musb_writel(tbase, TUSB_PULLUP_2_CTRL, 0x01FFFFFF);
+
+	/* Turn GPIO[5:0] to DMAREQ[5:0] signals */
+	musb_writel(tbase, TUSB_GPIO_CONF, TUSB_GPIO_CONF_DMAREQ(0x3f));
+
+	/* Burst size 16x16 bits, all six DMA requests enabled, DMA request
+	 * de-assertion time 2 system clocks p 62 */
+	musb_writel(tbase, TUSB_DMA_REQ_CONF,
+		TUSB_DMA_REQ_CONF_BURST_SIZE(2) |
+		TUSB_DMA_REQ_CONF_DMA_REQ_EN(0x3f) |
+		TUSB_DMA_REQ_CONF_DMA_REQ_ASSER(2));
+
+	/* Set 0 wait count for synchronous burst access */
+	musb_writel(tbase, TUSB_WAIT_COUNT, 1);
+}
+
+static int __init tusb_start(struct musb *musb)
+{
+	void __iomem	*tbase = musb->ctrl_base;
+	int		ret = 0;
+	unsigned long	flags;
+	u32		reg;
+
+	if (musb->board_set_power)
+		ret = musb->board_set_power(1);
+	if (ret != 0) {
+		printk(KERN_ERR "tusb: Cannot enable TUSB6010\n");
+		return ret;
+	}
+
+	spin_lock_irqsave(&musb->lock, flags);
+
+	if (musb_readl(tbase, TUSB_PROD_TEST_RESET) !=
+		TUSB_PROD_TEST_RESET_VAL) {
+		printk(KERN_ERR "tusb: Unable to detect TUSB6010\n");
+		goto err;
+	}
+
+	ret = tusb_print_revision(musb);
+	if (ret < 2) {
+		printk(KERN_ERR "tusb: Unsupported TUSB6010 revision %i\n",
+				ret);
+		goto err;
+	}
+
+	/* The uint bit for "USB non-PDR interrupt enable" has to be 1 when
+	 * NOR FLASH interface is used */
+	musb_writel(tbase, TUSB_VLYNQ_CTRL, 8);
+
+	/* Select PHY free running 60MHz as a system clock */
+	tusb_set_clock_source(musb, 1);
+
+	/* VBus valid timer 1us, disable DFT/Debug and VLYNQ clocks for
+	 * power saving, enable VBus detect and session end comparators,
+	 * enable IDpullup, enable VBus charging */
+	musb_writel(tbase, TUSB_PRCM_MNGMT,
+		TUSB_PRCM_MNGMT_VBUS_VALID_TIMER(0xa) |
+		TUSB_PRCM_MNGMT_VBUS_VALID_FLT_EN |
+		TUSB_PRCM_MNGMT_OTG_SESS_END_EN |
+		TUSB_PRCM_MNGMT_OTG_VBUS_DET_EN |
+		TUSB_PRCM_MNGMT_OTG_ID_PULLUP);
+	tusb_setup_cpu_interface(musb);
+
+	/* simplify:  always sense/pullup ID pins, as if in OTG mode */
+	reg = musb_readl(tbase, TUSB_PHY_OTG_CTRL_ENABLE);
+	reg |= TUSB_PHY_OTG_CTRL_WRPROTECT | TUSB_PHY_OTG_CTRL_OTG_ID_PULLUP;
+	musb_writel(tbase, TUSB_PHY_OTG_CTRL_ENABLE, reg);
+
+	reg = musb_readl(tbase, TUSB_PHY_OTG_CTRL);
+	reg |= TUSB_PHY_OTG_CTRL_WRPROTECT | TUSB_PHY_OTG_CTRL_OTG_ID_PULLUP;
+	musb_writel(tbase, TUSB_PHY_OTG_CTRL, reg);
+
+	spin_unlock_irqrestore(&musb->lock, flags);
+
+	return 0;
+
+err:
+	spin_unlock_irqrestore(&musb->lock, flags);
+
+	if (musb->board_set_power)
+		musb->board_set_power(0);
+
+	return -ENODEV;
+}
+
+int __init musb_platform_init(struct musb *musb)
+{
+	struct platform_device	*pdev;
+	struct resource		*mem;
+	void __iomem		*sync;
+	int			ret;
+
+	pdev = to_platform_device(musb->controller);
+
+	/* dma address for async dma */
+	mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	musb->async = mem->start;
+
+	/* dma address for sync dma */
+	mem = platform_get_resource(pdev, IORESOURCE_MEM, 1);
+	if (!mem) {
+		pr_debug("no sync dma resource?\n");
+		return -ENODEV;
+	}
+	musb->sync = mem->start;
+
+	sync = ioremap(mem->start, mem->end - mem->start + 1);
+	if (!sync) {
+		pr_debug("ioremap for sync failed\n");
+		return -ENOMEM;
+	}
+	musb->sync_va = sync;
+
+	/* Offsets from base: VLYNQ at 0x000, MUSB regs at 0x400,
+	 * FIFOs at 0x600, TUSB at 0x800
+	 */
+	musb->mregs += TUSB_BASE_OFFSET;
+
+	ret = tusb_start(musb);
+	if (ret) {
+		printk(KERN_ERR "Could not start tusb6010 (%d)\n",
+				ret);
+		return -ENODEV;
+	}
+	musb->isr = tusb_interrupt;
+
+	if (is_host_enabled(musb))
+		musb->board_set_vbus = tusb_source_power;
+	if (is_peripheral_enabled(musb))
+		musb->xceiv.set_power = tusb_draw_power;
+
+	setup_timer(&musb_idle_timer, musb_do_idle, (unsigned long) musb);
+
+	return ret;
+}
+
+int musb_platform_exit(struct musb *musb)
+{
+	del_timer_sync(&musb_idle_timer);
+
+	if (musb->board_set_power)
+		musb->board_set_power(0);
+
+	iounmap(musb->sync_va);
+
+	return 0;
+}
diff --git a/drivers/usb/musb/tusb6010.h b/drivers/usb/musb/tusb6010.h
new file mode 100644
index 000000000000..ab8c96286ce6
--- /dev/null
+++ b/drivers/usb/musb/tusb6010.h
@@ -0,0 +1,233 @@
+/*
+ * Definitions for TUSB6010 USB 2.0 OTG Dual Role controller
+ *
+ * Copyright (C) 2006 Nokia Corporation
+ * Jarkko Nikula <jarkko.nikula@nokia.com>
+ * Tony Lindgren <tony@atomide.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __TUSB6010_H__
+#define __TUSB6010_H__
+
+extern u8 tusb_get_revision(struct musb *musb);
+
+#ifdef CONFIG_USB_TUSB6010
+#define musb_in_tusb()			1
+#else
+#define musb_in_tusb()			0
+#endif
+
+#ifdef CONFIG_USB_TUSB_OMAP_DMA
+#define tusb_dma_omap()			1
+#else
+#define tusb_dma_omap()			0
+#endif
+
+/* VLYNQ control register. 32-bit at offset 0x000 */
+#define TUSB_VLYNQ_CTRL			0x004
+
+/* Mentor Graphics OTG core registers. 8,- 16- and 32-bit at offset 0x400 */
+#define TUSB_BASE_OFFSET		0x400
+
+/* FIFO registers 32-bit at offset 0x600 */
+#define TUSB_FIFO_BASE			0x600
+
+/* Device System & Control registers. 32-bit at offset 0x800 */
+#define TUSB_SYS_REG_BASE		0x800
+
+#define TUSB_DEV_CONF			(TUSB_SYS_REG_BASE + 0x000)
+#define		TUSB_DEV_CONF_USB_HOST_MODE		(1 << 16)
+#define		TUSB_DEV_CONF_PROD_TEST_MODE		(1 << 15)
+#define		TUSB_DEV_CONF_SOFT_ID			(1 << 1)
+#define		TUSB_DEV_CONF_ID_SEL			(1 << 0)
+
+#define TUSB_PHY_OTG_CTRL_ENABLE	(TUSB_SYS_REG_BASE + 0x004)
+#define TUSB_PHY_OTG_CTRL		(TUSB_SYS_REG_BASE + 0x008)
+#define		TUSB_PHY_OTG_CTRL_WRPROTECT		(0xa5 << 24)
+#define		TUSB_PHY_OTG_CTRL_OTG_ID_PULLUP		(1 << 23)
+#define		TUSB_PHY_OTG_CTRL_OTG_VBUS_DET_EN	(1 << 19)
+#define		TUSB_PHY_OTG_CTRL_OTG_SESS_END_EN	(1 << 18)
+#define		TUSB_PHY_OTG_CTRL_TESTM2		(1 << 17)
+#define		TUSB_PHY_OTG_CTRL_TESTM1		(1 << 16)
+#define		TUSB_PHY_OTG_CTRL_TESTM0		(1 << 15)
+#define		TUSB_PHY_OTG_CTRL_TX_DATA2		(1 << 14)
+#define		TUSB_PHY_OTG_CTRL_TX_GZ2		(1 << 13)
+#define		TUSB_PHY_OTG_CTRL_TX_ENABLE2		(1 << 12)
+#define		TUSB_PHY_OTG_CTRL_DM_PULLDOWN		(1 << 11)
+#define		TUSB_PHY_OTG_CTRL_DP_PULLDOWN		(1 << 10)
+#define		TUSB_PHY_OTG_CTRL_OSC_EN		(1 << 9)
+#define		TUSB_PHY_OTG_CTRL_PHYREF_CLKSEL(v)	(((v) & 3) << 7)
+#define		TUSB_PHY_OTG_CTRL_PD			(1 << 6)
+#define		TUSB_PHY_OTG_CTRL_PLL_ON		(1 << 5)
+#define		TUSB_PHY_OTG_CTRL_EXT_RPU		(1 << 4)
+#define		TUSB_PHY_OTG_CTRL_PWR_GOOD		(1 << 3)
+#define		TUSB_PHY_OTG_CTRL_RESET			(1 << 2)
+#define		TUSB_PHY_OTG_CTRL_SUSPENDM		(1 << 1)
+#define		TUSB_PHY_OTG_CTRL_CLK_MODE		(1 << 0)
+
+/*OTG status register */
+#define TUSB_DEV_OTG_STAT		(TUSB_SYS_REG_BASE + 0x00c)
+#define		TUSB_DEV_OTG_STAT_PWR_CLK_GOOD		(1 << 8)
+#define		TUSB_DEV_OTG_STAT_SESS_END		(1 << 7)
+#define		TUSB_DEV_OTG_STAT_SESS_VALID		(1 << 6)
+#define		TUSB_DEV_OTG_STAT_VBUS_VALID		(1 << 5)
+#define		TUSB_DEV_OTG_STAT_VBUS_SENSE		(1 << 4)
+#define		TUSB_DEV_OTG_STAT_ID_STATUS		(1 << 3)
+#define		TUSB_DEV_OTG_STAT_HOST_DISCON		(1 << 2)
+#define		TUSB_DEV_OTG_STAT_LINE_STATE		(3 << 0)
+#define		TUSB_DEV_OTG_STAT_DP_ENABLE		(1 << 1)
+#define		TUSB_DEV_OTG_STAT_DM_ENABLE		(1 << 0)
+
+#define TUSB_DEV_OTG_TIMER		(TUSB_SYS_REG_BASE + 0x010)
+#	define TUSB_DEV_OTG_TIMER_ENABLE		(1 << 31)
+#	define TUSB_DEV_OTG_TIMER_VAL(v)		((v) & 0x07ffffff)
+#define TUSB_PRCM_REV			(TUSB_SYS_REG_BASE + 0x014)
+
+/* PRCM configuration register */
+#define TUSB_PRCM_CONF			(TUSB_SYS_REG_BASE + 0x018)
+#define		TUSB_PRCM_CONF_SFW_CPEN		(1 << 24)
+#define		TUSB_PRCM_CONF_SYS_CLKSEL(v)	(((v) & 3) << 16)
+
+/* PRCM management register */
+#define TUSB_PRCM_MNGMT			(TUSB_SYS_REG_BASE + 0x01c)
+#define		TUSB_PRCM_MNGMT_SRP_FIX_TIMER(v)	(((v) & 0xf) << 25)
+#define		TUSB_PRCM_MNGMT_SRP_FIX_EN		(1 << 24)
+#define		TUSB_PRCM_MNGMT_VBUS_VALID_TIMER(v)	(((v) & 0xf) << 20)
+#define		TUSB_PRCM_MNGMT_VBUS_VALID_FLT_EN	(1 << 19)
+#define		TUSB_PRCM_MNGMT_DFT_CLK_DIS		(1 << 18)
+#define		TUSB_PRCM_MNGMT_VLYNQ_CLK_DIS		(1 << 17)
+#define		TUSB_PRCM_MNGMT_OTG_SESS_END_EN		(1 << 10)
+#define		TUSB_PRCM_MNGMT_OTG_VBUS_DET_EN		(1 << 9)
+#define		TUSB_PRCM_MNGMT_OTG_ID_PULLUP		(1 << 8)
+#define		TUSB_PRCM_MNGMT_15_SW_EN		(1 << 4)
+#define		TUSB_PRCM_MNGMT_33_SW_EN		(1 << 3)
+#define		TUSB_PRCM_MNGMT_5V_CPEN			(1 << 2)
+#define		TUSB_PRCM_MNGMT_PM_IDLE			(1 << 1)
+#define		TUSB_PRCM_MNGMT_DEV_IDLE		(1 << 0)
+
+/* Wake-up source clear and mask registers */
+#define TUSB_PRCM_WAKEUP_SOURCE		(TUSB_SYS_REG_BASE + 0x020)
+#define TUSB_PRCM_WAKEUP_CLEAR		(TUSB_SYS_REG_BASE + 0x028)
+#define TUSB_PRCM_WAKEUP_MASK		(TUSB_SYS_REG_BASE + 0x02c)
+#define		TUSB_PRCM_WAKEUP_RESERVED_BITS	(0xffffe << 13)
+#define		TUSB_PRCM_WGPIO_7	(1 << 12)
+#define		TUSB_PRCM_WGPIO_6	(1 << 11)
+#define		TUSB_PRCM_WGPIO_5	(1 << 10)
+#define		TUSB_PRCM_WGPIO_4	(1 << 9)
+#define		TUSB_PRCM_WGPIO_3	(1 << 8)
+#define		TUSB_PRCM_WGPIO_2	(1 << 7)
+#define		TUSB_PRCM_WGPIO_1	(1 << 6)
+#define		TUSB_PRCM_WGPIO_0	(1 << 5)
+#define		TUSB_PRCM_WHOSTDISCON	(1 << 4)	/* Host disconnect */
+#define		TUSB_PRCM_WBUS		(1 << 3)	/* USB bus resume */
+#define		TUSB_PRCM_WNORCS	(1 << 2)	/* NOR chip select */
+#define		TUSB_PRCM_WVBUS		(1 << 1)	/* OTG PHY VBUS */
+#define		TUSB_PRCM_WID		(1 << 0)	/* OTG PHY ID detect */
+
+#define TUSB_PULLUP_1_CTRL		(TUSB_SYS_REG_BASE + 0x030)
+#define TUSB_PULLUP_2_CTRL		(TUSB_SYS_REG_BASE + 0x034)
+#define TUSB_INT_CTRL_REV		(TUSB_SYS_REG_BASE + 0x038)
+#define TUSB_INT_CTRL_CONF		(TUSB_SYS_REG_BASE + 0x03c)
+#define TUSB_USBIP_INT_SRC		(TUSB_SYS_REG_BASE + 0x040)
+#define TUSB_USBIP_INT_SET		(TUSB_SYS_REG_BASE + 0x044)
+#define TUSB_USBIP_INT_CLEAR		(TUSB_SYS_REG_BASE + 0x048)
+#define TUSB_USBIP_INT_MASK		(TUSB_SYS_REG_BASE + 0x04c)
+#define TUSB_DMA_INT_SRC		(TUSB_SYS_REG_BASE + 0x050)
+#define TUSB_DMA_INT_SET		(TUSB_SYS_REG_BASE + 0x054)
+#define TUSB_DMA_INT_CLEAR		(TUSB_SYS_REG_BASE + 0x058)
+#define TUSB_DMA_INT_MASK		(TUSB_SYS_REG_BASE + 0x05c)
+#define TUSB_GPIO_INT_SRC		(TUSB_SYS_REG_BASE + 0x060)
+#define TUSB_GPIO_INT_SET		(TUSB_SYS_REG_BASE + 0x064)
+#define TUSB_GPIO_INT_CLEAR		(TUSB_SYS_REG_BASE + 0x068)
+#define TUSB_GPIO_INT_MASK		(TUSB_SYS_REG_BASE + 0x06c)
+
+/* NOR flash interrupt source registers */
+#define TUSB_INT_SRC			(TUSB_SYS_REG_BASE + 0x070)
+#define TUSB_INT_SRC_SET		(TUSB_SYS_REG_BASE + 0x074)
+#define TUSB_INT_SRC_CLEAR		(TUSB_SYS_REG_BASE + 0x078)
+#define TUSB_INT_MASK			(TUSB_SYS_REG_BASE + 0x07c)
+#define		TUSB_INT_SRC_TXRX_DMA_DONE		(1 << 24)
+#define		TUSB_INT_SRC_USB_IP_CORE		(1 << 17)
+#define		TUSB_INT_SRC_OTG_TIMEOUT		(1 << 16)
+#define		TUSB_INT_SRC_VBUS_SENSE_CHNG		(1 << 15)
+#define		TUSB_INT_SRC_ID_STATUS_CHNG		(1 << 14)
+#define		TUSB_INT_SRC_DEV_WAKEUP			(1 << 13)
+#define		TUSB_INT_SRC_DEV_READY			(1 << 12)
+#define		TUSB_INT_SRC_USB_IP_TX			(1 << 9)
+#define		TUSB_INT_SRC_USB_IP_RX			(1 << 8)
+#define		TUSB_INT_SRC_USB_IP_VBUS_ERR		(1 << 7)
+#define		TUSB_INT_SRC_USB_IP_VBUS_REQ		(1 << 6)
+#define		TUSB_INT_SRC_USB_IP_DISCON		(1 << 5)
+#define		TUSB_INT_SRC_USB_IP_CONN		(1 << 4)
+#define		TUSB_INT_SRC_USB_IP_SOF			(1 << 3)
+#define		TUSB_INT_SRC_USB_IP_RST_BABBLE		(1 << 2)
+#define		TUSB_INT_SRC_USB_IP_RESUME		(1 << 1)
+#define		TUSB_INT_SRC_USB_IP_SUSPEND		(1 << 0)
+
+/* NOR flash interrupt registers reserved bits. Must be written as 0 */
+#define		TUSB_INT_MASK_RESERVED_17		(0x3fff << 17)
+#define		TUSB_INT_MASK_RESERVED_13		(1 << 13)
+#define		TUSB_INT_MASK_RESERVED_8		(0xf << 8)
+#define		TUSB_INT_SRC_RESERVED_26		(0x1f << 26)
+#define		TUSB_INT_SRC_RESERVED_18		(0x3f << 18)
+#define		TUSB_INT_SRC_RESERVED_10		(0x03 << 10)
+
+/* Reserved bits for NOR flash interrupt mask and clear register */
+#define		TUSB_INT_MASK_RESERVED_BITS	(TUSB_INT_MASK_RESERVED_17 | \
+						TUSB_INT_MASK_RESERVED_13 | \
+						TUSB_INT_MASK_RESERVED_8)
+
+/* Reserved bits for NOR flash interrupt status register */
+#define		TUSB_INT_SRC_RESERVED_BITS	(TUSB_INT_SRC_RESERVED_26 | \
+						TUSB_INT_SRC_RESERVED_18 | \
+						TUSB_INT_SRC_RESERVED_10)
+
+#define TUSB_GPIO_REV			(TUSB_SYS_REG_BASE + 0x080)
+#define TUSB_GPIO_CONF			(TUSB_SYS_REG_BASE + 0x084)
+#define TUSB_DMA_CTRL_REV		(TUSB_SYS_REG_BASE + 0x100)
+#define TUSB_DMA_REQ_CONF		(TUSB_SYS_REG_BASE + 0x104)
+#define TUSB_EP0_CONF			(TUSB_SYS_REG_BASE + 0x108)
+#define TUSB_DMA_EP_MAP			(TUSB_SYS_REG_BASE + 0x148)
+
+/* Offsets from each ep base register */
+#define TUSB_EP_TX_OFFSET		0x10c	/* EP_IN in docs */
+#define TUSB_EP_RX_OFFSET		0x14c	/* EP_OUT in docs */
+#define TUSB_EP_MAX_PACKET_SIZE_OFFSET	0x188
+
+#define TUSB_WAIT_COUNT			(TUSB_SYS_REG_BASE + 0x1c8)
+#define TUSB_SCRATCH_PAD		(TUSB_SYS_REG_BASE + 0x1c4)
+#define TUSB_PROD_TEST_RESET		(TUSB_SYS_REG_BASE + 0x1d8)
+
+/* Device System & Control register bitfields */
+#define TUSB_INT_CTRL_CONF_INT_RELCYC(v)	(((v) & 0x7) << 18)
+#define TUSB_INT_CTRL_CONF_INT_POLARITY		(1 << 17)
+#define TUSB_INT_CTRL_CONF_INT_MODE		(1 << 16)
+#define TUSB_GPIO_CONF_DMAREQ(v)		(((v) & 0x3f) << 24)
+#define TUSB_DMA_REQ_CONF_BURST_SIZE(v)		(((v) & 3) << 26)
+#define TUSB_DMA_REQ_CONF_DMA_REQ_EN(v)		(((v) & 0x3f) << 20)
+#define TUSB_DMA_REQ_CONF_DMA_REQ_ASSER(v)	(((v) & 0xf) << 16)
+#define TUSB_EP0_CONFIG_SW_EN			(1 << 8)
+#define TUSB_EP0_CONFIG_DIR_TX			(1 << 7)
+#define TUSB_EP0_CONFIG_XFR_SIZE(v)		((v) & 0x7f)
+#define TUSB_EP_CONFIG_SW_EN			(1 << 31)
+#define TUSB_EP_CONFIG_XFR_SIZE(v)		((v) & 0x7fffffff)
+#define TUSB_PROD_TEST_RESET_VAL		0xa596
+#define TUSB_EP_FIFO(ep)			(TUSB_FIFO_BASE + (ep) * 0x20)
+
+#define TUSB_DIDR1_LO				(TUSB_SYS_REG_BASE + 0x1f8)
+#define TUSB_DIDR1_HI				(TUSB_SYS_REG_BASE + 0x1fc)
+#define		TUSB_DIDR1_HI_CHIP_REV(v)		(((v) >> 17) & 0xf)
+#define			TUSB_DIDR1_HI_REV_20		0
+#define			TUSB_DIDR1_HI_REV_30		1
+#define			TUSB_DIDR1_HI_REV_31		2
+
+#define TUSB_REV_10	0x10
+#define TUSB_REV_20	0x20
+#define TUSB_REV_30	0x30
+#define TUSB_REV_31	0x31
+
+#endif /* __TUSB6010_H__ */
diff --git a/drivers/usb/musb/tusb6010_omap.c b/drivers/usb/musb/tusb6010_omap.c
new file mode 100644
index 000000000000..52f7f29cebda
--- /dev/null
+++ b/drivers/usb/musb/tusb6010_omap.c
@@ -0,0 +1,719 @@
+/*
+ * TUSB6010 USB 2.0 OTG Dual Role controller OMAP DMA interface
+ *
+ * Copyright (C) 2006 Nokia Corporation
+ * Tony Lindgren <tony@atomide.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/usb.h>
+#include <linux/platform_device.h>
+#include <linux/dma-mapping.h>
+#include <asm/arch/dma.h>
+#include <asm/arch/mux.h>
+
+#include "musb_core.h"
+
+#define to_chdat(c)		((struct tusb_omap_dma_ch *)(c)->private_data)
+
+#define MAX_DMAREQ		5	/* REVISIT: Really 6, but req5 not OK */
+
+struct tusb_omap_dma_ch {
+	struct musb		*musb;
+	void __iomem		*tbase;
+	unsigned long		phys_offset;
+	int			epnum;
+	u8			tx;
+	struct musb_hw_ep	*hw_ep;
+
+	int			ch;
+	s8			dmareq;
+	s8			sync_dev;
+
+	struct tusb_omap_dma	*tusb_dma;
+
+	void __iomem		*dma_addr;
+
+	u32			len;
+	u16			packet_sz;
+	u16			transfer_packet_sz;
+	u32			transfer_len;
+	u32			completed_len;
+};
+
+struct tusb_omap_dma {
+	struct dma_controller		controller;
+	struct musb			*musb;
+	void __iomem			*tbase;
+
+	int				ch;
+	s8				dmareq;
+	s8				sync_dev;
+	unsigned			multichannel:1;
+};
+
+static int tusb_omap_dma_start(struct dma_controller *c)
+{
+	struct tusb_omap_dma	*tusb_dma;
+
+	tusb_dma = container_of(c, struct tusb_omap_dma, controller);
+
+	/* DBG(3, "ep%i ch: %i\n", chdat->epnum, chdat->ch); */
+
+	return 0;
+}
+
+static int tusb_omap_dma_stop(struct dma_controller *c)
+{
+	struct tusb_omap_dma	*tusb_dma;
+
+	tusb_dma = container_of(c, struct tusb_omap_dma, controller);
+
+	/* DBG(3, "ep%i ch: %i\n", chdat->epnum, chdat->ch); */
+
+	return 0;
+}
+
+/*
+ * Allocate dmareq0 to the current channel unless it's already taken
+ */
+static inline int tusb_omap_use_shared_dmareq(struct tusb_omap_dma_ch *chdat)
+{
+	u32		reg = musb_readl(chdat->tbase, TUSB_DMA_EP_MAP);
+
+	if (reg != 0) {
+		DBG(3, "ep%i dmareq0 is busy for ep%i\n",
+			chdat->epnum, reg & 0xf);
+		return -EAGAIN;
+	}
+
+	if (chdat->tx)
+		reg = (1 << 4) | chdat->epnum;
+	else
+		reg = chdat->epnum;
+
+	musb_writel(chdat->tbase, TUSB_DMA_EP_MAP, reg);
+
+	return 0;
+}
+
+static inline void tusb_omap_free_shared_dmareq(struct tusb_omap_dma_ch *chdat)
+{
+	u32		reg = musb_readl(chdat->tbase, TUSB_DMA_EP_MAP);
+
+	if ((reg & 0xf) != chdat->epnum) {
+		printk(KERN_ERR "ep%i trying to release dmareq0 for ep%i\n",
+			chdat->epnum, reg & 0xf);
+		return;
+	}
+	musb_writel(chdat->tbase, TUSB_DMA_EP_MAP, 0);
+}
+
+/*
+ * See also musb_dma_completion in plat_uds.c and musb_g_[tx|rx]() in
+ * musb_gadget.c.
+ */
+static void tusb_omap_dma_cb(int lch, u16 ch_status, void *data)
+{
+	struct dma_channel	*channel = (struct dma_channel *)data;
+	struct tusb_omap_dma_ch	*chdat = to_chdat(channel);
+	struct tusb_omap_dma	*tusb_dma = chdat->tusb_dma;
+	struct musb		*musb = chdat->musb;
+	struct musb_hw_ep	*hw_ep = chdat->hw_ep;
+	void __iomem		*ep_conf = hw_ep->conf;
+	void __iomem		*mbase = musb->mregs;
+	unsigned long		remaining, flags, pio;
+	int			ch;
+
+	spin_lock_irqsave(&musb->lock, flags);
+
+	if (tusb_dma->multichannel)
+		ch = chdat->ch;
+	else
+		ch = tusb_dma->ch;
+
+	if (ch_status != OMAP_DMA_BLOCK_IRQ)
+		printk(KERN_ERR "TUSB DMA error status: %i\n", ch_status);
+
+	DBG(3, "ep%i %s dma callback ch: %i status: %x\n",
+		chdat->epnum, chdat->tx ? "tx" : "rx",
+		ch, ch_status);
+
+	if (chdat->tx)
+		remaining = musb_readl(ep_conf, TUSB_EP_TX_OFFSET);
+	else
+		remaining = musb_readl(ep_conf, TUSB_EP_RX_OFFSET);
+
+	remaining = TUSB_EP_CONFIG_XFR_SIZE(remaining);
+
+	/* HW issue #10: XFR_SIZE may get corrupt on DMA (both async & sync) */
+	if (unlikely(remaining > chdat->transfer_len)) {
+		DBG(2, "Corrupt %s dma ch%i XFR_SIZE: 0x%08lx\n",
+			chdat->tx ? "tx" : "rx", chdat->ch,
+			remaining);
+		remaining = 0;
+	}
+
+	channel->actual_len = chdat->transfer_len - remaining;
+	pio = chdat->len - channel->actual_len;
+
+	DBG(3, "DMA remaining %lu/%u\n", remaining, chdat->transfer_len);
+
+	/* Transfer remaining 1 - 31 bytes */
+	if (pio > 0 && pio < 32) {
+		u8	*buf;
+
+		DBG(3, "Using PIO for remaining %lu bytes\n", pio);
+		buf = phys_to_virt((u32)chdat->dma_addr) + chdat->transfer_len;
+		if (chdat->tx) {
+			dma_cache_maint(phys_to_virt((u32)chdat->dma_addr),
+					chdat->transfer_len, DMA_TO_DEVICE);
+			musb_write_fifo(hw_ep, pio, buf);
+		} else {
+			musb_read_fifo(hw_ep, pio, buf);
+			dma_cache_maint(phys_to_virt((u32)chdat->dma_addr),
+					chdat->transfer_len, DMA_FROM_DEVICE);
+		}
+		channel->actual_len += pio;
+	}
+
+	if (!tusb_dma->multichannel)
+		tusb_omap_free_shared_dmareq(chdat);
+
+	channel->status = MUSB_DMA_STATUS_FREE;
+
+	/* Handle only RX callbacks here. TX callbacks must be handled based
+	 * on the TUSB DMA status interrupt.
+	 * REVISIT: Use both TUSB DMA status interrupt and OMAP DMA callback
+	 * interrupt for RX and TX.
+	 */
+	if (!chdat->tx)
+		musb_dma_completion(musb, chdat->epnum, chdat->tx);
+
+	/* We must terminate short tx transfers manually by setting TXPKTRDY.
+	 * REVISIT: This same problem may occur with other MUSB dma as well.
+	 * Easy to test with g_ether by pinging the MUSB board with ping -s54.
+	 */
+	if ((chdat->transfer_len < chdat->packet_sz)
+			|| (chdat->transfer_len % chdat->packet_sz != 0)) {
+		u16	csr;
+
+		if (chdat->tx) {
+			DBG(3, "terminating short tx packet\n");
+			musb_ep_select(mbase, chdat->epnum);
+			csr = musb_readw(hw_ep->regs, MUSB_TXCSR);
+			csr |= MUSB_TXCSR_MODE | MUSB_TXCSR_TXPKTRDY
+				| MUSB_TXCSR_P_WZC_BITS;
+			musb_writew(hw_ep->regs, MUSB_TXCSR, csr);
+		}
+	}
+
+	spin_unlock_irqrestore(&musb->lock, flags);
+}
+
+static int tusb_omap_dma_program(struct dma_channel *channel, u16 packet_sz,
+				u8 rndis_mode, dma_addr_t dma_addr, u32 len)
+{
+	struct tusb_omap_dma_ch		*chdat = to_chdat(channel);
+	struct tusb_omap_dma		*tusb_dma = chdat->tusb_dma;
+	struct musb			*musb = chdat->musb;
+	struct musb_hw_ep		*hw_ep = chdat->hw_ep;
+	void __iomem			*mbase = musb->mregs;
+	void __iomem			*ep_conf = hw_ep->conf;
+	dma_addr_t			fifo = hw_ep->fifo_sync;
+	struct omap_dma_channel_params	dma_params;
+	u32				dma_remaining;
+	int				src_burst, dst_burst;
+	u16				csr;
+	int				ch;
+	s8				dmareq;
+	s8				sync_dev;
+
+	if (unlikely(dma_addr & 0x1) || (len < 32) || (len > packet_sz))
+		return false;
+
+	/*
+	 * HW issue #10: Async dma will eventually corrupt the XFR_SIZE
+	 * register which will cause missed DMA interrupt. We could try to
+	 * use a timer for the callback, but it is unsafe as the XFR_SIZE
+	 * register is corrupt, and we won't know if the DMA worked.
+	 */
+	if (dma_addr & 0x2)
+		return false;
+
+	/*
+	 * Because of HW issue #10, it seems like mixing sync DMA and async
+	 * PIO access can confuse the DMA. Make sure XFR_SIZE is reset before
+	 * using the channel for DMA.
+	 */
+	if (chdat->tx)
+		dma_remaining = musb_readl(ep_conf, TUSB_EP_TX_OFFSET);
+	else
+		dma_remaining = musb_readl(ep_conf, TUSB_EP_RX_OFFSET);
+
+	dma_remaining = TUSB_EP_CONFIG_XFR_SIZE(dma_remaining);
+	if (dma_remaining) {
+		DBG(2, "Busy %s dma ch%i, not using: %08x\n",
+			chdat->tx ? "tx" : "rx", chdat->ch,
+			dma_remaining);
+		return false;
+	}
+
+	chdat->transfer_len = len & ~0x1f;
+
+	if (len < packet_sz)
+		chdat->transfer_packet_sz = chdat->transfer_len;
+	else
+		chdat->transfer_packet_sz = packet_sz;
+
+	if (tusb_dma->multichannel) {
+		ch = chdat->ch;
+		dmareq = chdat->dmareq;
+		sync_dev = chdat->sync_dev;
+	} else {
+		if (tusb_omap_use_shared_dmareq(chdat) != 0) {
+			DBG(3, "could not get dma for ep%i\n", chdat->epnum);
+			return false;
+		}
+		if (tusb_dma->ch < 0) {
+			/* REVISIT: This should get blocked earlier, happens
+			 * with MSC ErrorRecoveryTest
+			 */
+			WARN_ON(1);
+			return false;
+		}
+
+		ch = tusb_dma->ch;
+		dmareq = tusb_dma->dmareq;
+		sync_dev = tusb_dma->sync_dev;
+		omap_set_dma_callback(ch, tusb_omap_dma_cb, channel);
+	}
+
+	chdat->packet_sz = packet_sz;
+	chdat->len = len;
+	channel->actual_len = 0;
+	chdat->dma_addr = (void __iomem *)dma_addr;
+	channel->status = MUSB_DMA_STATUS_BUSY;
+
+	/* Since we're recycling dma areas, we need to clean or invalidate */
+	if (chdat->tx)
+		dma_cache_maint(phys_to_virt(dma_addr), len, DMA_TO_DEVICE);
+	else
+		dma_cache_maint(phys_to_virt(dma_addr), len, DMA_FROM_DEVICE);
+
+	/* Use 16-bit transfer if dma_addr is not 32-bit aligned */
+	if ((dma_addr & 0x3) == 0) {
+		dma_params.data_type = OMAP_DMA_DATA_TYPE_S32;
+		dma_params.elem_count = 8;		/* Elements in frame */
+	} else {
+		dma_params.data_type = OMAP_DMA_DATA_TYPE_S16;
+		dma_params.elem_count = 16;		/* Elements in frame */
+		fifo = hw_ep->fifo_async;
+	}
+
+	dma_params.frame_count	= chdat->transfer_len / 32; /* Burst sz frame */
+
+	DBG(3, "ep%i %s dma ch%i dma: %08x len: %u(%u) packet_sz: %i(%i)\n",
+		chdat->epnum, chdat->tx ? "tx" : "rx",
+		ch, dma_addr, chdat->transfer_len, len,
+		chdat->transfer_packet_sz, packet_sz);
+
+	/*
+	 * Prepare omap DMA for transfer
+	 */
+	if (chdat->tx) {
+		dma_params.src_amode	= OMAP_DMA_AMODE_POST_INC;
+		dma_params.src_start	= (unsigned long)dma_addr;
+		dma_params.src_ei	= 0;
+		dma_params.src_fi	= 0;
+
+		dma_params.dst_amode	= OMAP_DMA_AMODE_DOUBLE_IDX;
+		dma_params.dst_start	= (unsigned long)fifo;
+		dma_params.dst_ei	= 1;
+		dma_params.dst_fi	= -31;	/* Loop 32 byte window */
+
+		dma_params.trigger	= sync_dev;
+		dma_params.sync_mode	= OMAP_DMA_SYNC_FRAME;
+		dma_params.src_or_dst_synch	= 0;	/* Dest sync */
+
+		src_burst = OMAP_DMA_DATA_BURST_16;	/* 16x32 read */
+		dst_burst = OMAP_DMA_DATA_BURST_8;	/* 8x32 write */
+	} else {
+		dma_params.src_amode	= OMAP_DMA_AMODE_DOUBLE_IDX;
+		dma_params.src_start	= (unsigned long)fifo;
+		dma_params.src_ei	= 1;
+		dma_params.src_fi	= -31;	/* Loop 32 byte window */
+
+		dma_params.dst_amode	= OMAP_DMA_AMODE_POST_INC;
+		dma_params.dst_start	= (unsigned long)dma_addr;
+		dma_params.dst_ei	= 0;
+		dma_params.dst_fi	= 0;
+
+		dma_params.trigger	= sync_dev;
+		dma_params.sync_mode	= OMAP_DMA_SYNC_FRAME;
+		dma_params.src_or_dst_synch	= 1;	/* Source sync */
+
+		src_burst = OMAP_DMA_DATA_BURST_8;	/* 8x32 read */
+		dst_burst = OMAP_DMA_DATA_BURST_16;	/* 16x32 write */
+	}
+
+	DBG(3, "ep%i %s using %i-bit %s dma from 0x%08lx to 0x%08lx\n",
+		chdat->epnum, chdat->tx ? "tx" : "rx",
+		(dma_params.data_type == OMAP_DMA_DATA_TYPE_S32) ? 32 : 16,
+		((dma_addr & 0x3) == 0) ? "sync" : "async",
+		dma_params.src_start, dma_params.dst_start);
+
+	omap_set_dma_params(ch, &dma_params);
+	omap_set_dma_src_burst_mode(ch, src_burst);
+	omap_set_dma_dest_burst_mode(ch, dst_burst);
+	omap_set_dma_write_mode(ch, OMAP_DMA_WRITE_LAST_NON_POSTED);
+
+	/*
+	 * Prepare MUSB for DMA transfer
+	 */
+	if (chdat->tx) {
+		musb_ep_select(mbase, chdat->epnum);
+		csr = musb_readw(hw_ep->regs, MUSB_TXCSR);
+		csr |= (MUSB_TXCSR_AUTOSET | MUSB_TXCSR_DMAENAB
+			| MUSB_TXCSR_DMAMODE | MUSB_TXCSR_MODE);
+		csr &= ~MUSB_TXCSR_P_UNDERRUN;
+		musb_writew(hw_ep->regs, MUSB_TXCSR, csr);
+	} else {
+		musb_ep_select(mbase, chdat->epnum);
+		csr = musb_readw(hw_ep->regs, MUSB_RXCSR);
+		csr |= MUSB_RXCSR_DMAENAB;
+		csr &= ~(MUSB_RXCSR_AUTOCLEAR | MUSB_RXCSR_DMAMODE);
+		musb_writew(hw_ep->regs, MUSB_RXCSR,
+			csr | MUSB_RXCSR_P_WZC_BITS);
+	}
+
+	/*
+	 * Start DMA transfer
+	 */
+	omap_start_dma(ch);
+
+	if (chdat->tx) {
+		/* Send transfer_packet_sz packets at a time */
+		musb_writel(ep_conf, TUSB_EP_MAX_PACKET_SIZE_OFFSET,
+			chdat->transfer_packet_sz);
+
+		musb_writel(ep_conf, TUSB_EP_TX_OFFSET,
+			TUSB_EP_CONFIG_XFR_SIZE(chdat->transfer_len));
+	} else {
+		/* Receive transfer_packet_sz packets at a time */
+		musb_writel(ep_conf, TUSB_EP_MAX_PACKET_SIZE_OFFSET,
+			chdat->transfer_packet_sz << 16);
+
+		musb_writel(ep_conf, TUSB_EP_RX_OFFSET,
+			TUSB_EP_CONFIG_XFR_SIZE(chdat->transfer_len));
+	}
+
+	return true;
+}
+
+static int tusb_omap_dma_abort(struct dma_channel *channel)
+{
+	struct tusb_omap_dma_ch	*chdat = to_chdat(channel);
+	struct tusb_omap_dma	*tusb_dma = chdat->tusb_dma;
+
+	if (!tusb_dma->multichannel) {
+		if (tusb_dma->ch >= 0) {
+			omap_stop_dma(tusb_dma->ch);
+			omap_free_dma(tusb_dma->ch);
+			tusb_dma->ch = -1;
+		}
+
+		tusb_dma->dmareq = -1;
+		tusb_dma->sync_dev = -1;
+	}
+
+	channel->status = MUSB_DMA_STATUS_FREE;
+
+	return 0;
+}
+
+static inline int tusb_omap_dma_allocate_dmareq(struct tusb_omap_dma_ch *chdat)
+{
+	u32		reg = musb_readl(chdat->tbase, TUSB_DMA_EP_MAP);
+	int		i, dmareq_nr = -1;
+
+	const int sync_dev[6] = {
+		OMAP24XX_DMA_EXT_DMAREQ0,
+		OMAP24XX_DMA_EXT_DMAREQ1,
+		OMAP242X_DMA_EXT_DMAREQ2,
+		OMAP242X_DMA_EXT_DMAREQ3,
+		OMAP242X_DMA_EXT_DMAREQ4,
+		OMAP242X_DMA_EXT_DMAREQ5,
+	};
+
+	for (i = 0; i < MAX_DMAREQ; i++) {
+		int cur = (reg & (0xf << (i * 5))) >> (i * 5);
+		if (cur == 0) {
+			dmareq_nr = i;
+			break;
+		}
+	}
+
+	if (dmareq_nr == -1)
+		return -EAGAIN;
+
+	reg |= (chdat->epnum << (dmareq_nr * 5));
+	if (chdat->tx)
+		reg |= ((1 << 4) << (dmareq_nr * 5));
+	musb_writel(chdat->tbase, TUSB_DMA_EP_MAP, reg);
+
+	chdat->dmareq = dmareq_nr;
+	chdat->sync_dev = sync_dev[chdat->dmareq];
+
+	return 0;
+}
+
+static inline void tusb_omap_dma_free_dmareq(struct tusb_omap_dma_ch *chdat)
+{
+	u32 reg;
+
+	if (!chdat || chdat->dmareq < 0)
+		return;
+
+	reg = musb_readl(chdat->tbase, TUSB_DMA_EP_MAP);
+	reg &= ~(0x1f << (chdat->dmareq * 5));
+	musb_writel(chdat->tbase, TUSB_DMA_EP_MAP, reg);
+
+	chdat->dmareq = -1;
+	chdat->sync_dev = -1;
+}
+
+static struct dma_channel *dma_channel_pool[MAX_DMAREQ];
+
+static struct dma_channel *
+tusb_omap_dma_allocate(struct dma_controller *c,
+		struct musb_hw_ep *hw_ep,
+		u8 tx)
+{
+	int ret, i;
+	const char		*dev_name;
+	struct tusb_omap_dma	*tusb_dma;
+	struct musb		*musb;
+	void __iomem		*tbase;
+	struct dma_channel	*channel = NULL;
+	struct tusb_omap_dma_ch	*chdat = NULL;
+	u32			reg;
+
+	tusb_dma = container_of(c, struct tusb_omap_dma, controller);
+	musb = tusb_dma->musb;
+	tbase = musb->ctrl_base;
+
+	reg = musb_readl(tbase, TUSB_DMA_INT_MASK);
+	if (tx)
+		reg &= ~(1 << hw_ep->epnum);
+	else
+		reg &= ~(1 << (hw_ep->epnum + 15));
+	musb_writel(tbase, TUSB_DMA_INT_MASK, reg);
+
+	/* REVISIT: Why does dmareq5 not work? */
+	if (hw_ep->epnum == 0) {
+		DBG(3, "Not allowing DMA for ep0 %s\n", tx ? "tx" : "rx");
+		return NULL;
+	}
+
+	for (i = 0; i < MAX_DMAREQ; i++) {
+		struct dma_channel *ch = dma_channel_pool[i];
+		if (ch->status == MUSB_DMA_STATUS_UNKNOWN) {
+			ch->status = MUSB_DMA_STATUS_FREE;
+			channel = ch;
+			chdat = ch->private_data;
+			break;
+		}
+	}
+
+	if (!channel)
+		return NULL;
+
+	if (tx) {
+		chdat->tx = 1;
+		dev_name = "TUSB transmit";
+	} else {
+		chdat->tx = 0;
+		dev_name = "TUSB receive";
+	}
+
+	chdat->musb = tusb_dma->musb;
+	chdat->tbase = tusb_dma->tbase;
+	chdat->hw_ep = hw_ep;
+	chdat->epnum = hw_ep->epnum;
+	chdat->dmareq = -1;
+	chdat->completed_len = 0;
+	chdat->tusb_dma = tusb_dma;
+
+	channel->max_len = 0x7fffffff;
+	channel->desired_mode = 0;
+	channel->actual_len = 0;
+
+	if (tusb_dma->multichannel) {
+		ret = tusb_omap_dma_allocate_dmareq(chdat);
+		if (ret != 0)
+			goto free_dmareq;
+
+		ret = omap_request_dma(chdat->sync_dev, dev_name,
+				tusb_omap_dma_cb, channel, &chdat->ch);
+		if (ret != 0)
+			goto free_dmareq;
+	} else if (tusb_dma->ch == -1) {
+		tusb_dma->dmareq = 0;
+		tusb_dma->sync_dev = OMAP24XX_DMA_EXT_DMAREQ0;
+
+		/* Callback data gets set later in the shared dmareq case */
+		ret = omap_request_dma(tusb_dma->sync_dev, "TUSB shared",
+				tusb_omap_dma_cb, NULL, &tusb_dma->ch);
+		if (ret != 0)
+			goto free_dmareq;
+
+		chdat->dmareq = -1;
+		chdat->ch = -1;
+	}
+
+	DBG(3, "ep%i %s dma: %s dma%i dmareq%i sync%i\n",
+		chdat->epnum,
+		chdat->tx ? "tx" : "rx",
+		chdat->ch >= 0 ? "dedicated" : "shared",
+		chdat->ch >= 0 ? chdat->ch : tusb_dma->ch,
+		chdat->dmareq >= 0 ? chdat->dmareq : tusb_dma->dmareq,
+		chdat->sync_dev >= 0 ? chdat->sync_dev : tusb_dma->sync_dev);
+
+	return channel;
+
+free_dmareq:
+	tusb_omap_dma_free_dmareq(chdat);
+
+	DBG(3, "ep%i: Could not get a DMA channel\n", chdat->epnum);
+	channel->status = MUSB_DMA_STATUS_UNKNOWN;
+
+	return NULL;
+}
+
+static void tusb_omap_dma_release(struct dma_channel *channel)
+{
+	struct tusb_omap_dma_ch	*chdat = to_chdat(channel);
+	struct musb		*musb = chdat->musb;
+	void __iomem		*tbase = musb->ctrl_base;
+	u32			reg;
+
+	DBG(3, "ep%i ch%i\n", chdat->epnum, chdat->ch);
+
+	reg = musb_readl(tbase, TUSB_DMA_INT_MASK);
+	if (chdat->tx)
+		reg |= (1 << chdat->epnum);
+	else
+		reg |= (1 << (chdat->epnum + 15));
+	musb_writel(tbase, TUSB_DMA_INT_MASK, reg);
+
+	reg = musb_readl(tbase, TUSB_DMA_INT_CLEAR);
+	if (chdat->tx)
+		reg |= (1 << chdat->epnum);
+	else
+		reg |= (1 << (chdat->epnum + 15));
+	musb_writel(tbase, TUSB_DMA_INT_CLEAR, reg);
+
+	channel->status = MUSB_DMA_STATUS_UNKNOWN;
+
+	if (chdat->ch >= 0) {
+		omap_stop_dma(chdat->ch);
+		omap_free_dma(chdat->ch);
+		chdat->ch = -1;
+	}
+
+	if (chdat->dmareq >= 0)
+		tusb_omap_dma_free_dmareq(chdat);
+
+	channel = NULL;
+}
+
+void dma_controller_destroy(struct dma_controller *c)
+{
+	struct tusb_omap_dma	*tusb_dma;
+	int			i;
+
+	tusb_dma = container_of(c, struct tusb_omap_dma, controller);
+	for (i = 0; i < MAX_DMAREQ; i++) {
+		struct dma_channel *ch = dma_channel_pool[i];
+		if (ch) {
+			kfree(ch->private_data);
+			kfree(ch);
+		}
+	}
+
+	if (!tusb_dma->multichannel && tusb_dma && tusb_dma->ch >= 0)
+		omap_free_dma(tusb_dma->ch);
+
+	kfree(tusb_dma);
+}
+
+struct dma_controller *__init
+dma_controller_create(struct musb *musb, void __iomem *base)
+{
+	void __iomem		*tbase = musb->ctrl_base;
+	struct tusb_omap_dma	*tusb_dma;
+	int			i;
+
+	/* REVISIT: Get dmareq lines used from board-*.c */
+
+	musb_writel(musb->ctrl_base, TUSB_DMA_INT_MASK, 0x7fffffff);
+	musb_writel(musb->ctrl_base, TUSB_DMA_EP_MAP, 0);
+
+	musb_writel(tbase, TUSB_DMA_REQ_CONF,
+		TUSB_DMA_REQ_CONF_BURST_SIZE(2)
+		| TUSB_DMA_REQ_CONF_DMA_REQ_EN(0x3f)
+		| TUSB_DMA_REQ_CONF_DMA_REQ_ASSER(2));
+
+	tusb_dma = kzalloc(sizeof(struct tusb_omap_dma), GFP_KERNEL);
+	if (!tusb_dma)
+		goto cleanup;
+
+	tusb_dma->musb = musb;
+	tusb_dma->tbase = musb->ctrl_base;
+
+	tusb_dma->ch = -1;
+	tusb_dma->dmareq = -1;
+	tusb_dma->sync_dev = -1;
+
+	tusb_dma->controller.start = tusb_omap_dma_start;
+	tusb_dma->controller.stop = tusb_omap_dma_stop;
+	tusb_dma->controller.channel_alloc = tusb_omap_dma_allocate;
+	tusb_dma->controller.channel_release = tusb_omap_dma_release;
+	tusb_dma->controller.channel_program = tusb_omap_dma_program;
+	tusb_dma->controller.channel_abort = tusb_omap_dma_abort;
+
+	if (tusb_get_revision(musb) >= TUSB_REV_30)
+		tusb_dma->multichannel = 1;
+
+	for (i = 0; i < MAX_DMAREQ; i++) {
+		struct dma_channel	*ch;
+		struct tusb_omap_dma_ch	*chdat;
+
+		ch = kzalloc(sizeof(struct dma_channel), GFP_KERNEL);
+		if (!ch)
+			goto cleanup;
+
+		dma_channel_pool[i] = ch;
+
+		chdat = kzalloc(sizeof(struct tusb_omap_dma_ch), GFP_KERNEL);
+		if (!chdat)
+			goto cleanup;
+
+		ch->status = MUSB_DMA_STATUS_UNKNOWN;
+		ch->private_data = chdat;
+	}
+
+	return &tusb_dma->controller;
+
+cleanup:
+	dma_controller_destroy(&tusb_dma->controller);
+
+	return NULL;
+}
diff --git a/drivers/usb/serial/Kconfig b/drivers/usb/serial/Kconfig
index 8878c1767fc8..70338f4ec918 100644
--- a/drivers/usb/serial/Kconfig
+++ b/drivers/usb/serial/Kconfig
@@ -499,9 +499,10 @@ config USB_SERIAL_SAFE_PADDED
 config USB_SERIAL_SIERRAWIRELESS
 	tristate "USB Sierra Wireless Driver"
 	help
-	  Say M here if you want to use a Sierra Wireless device (if
-	  using an PC 5220 or AC580 please use the Airprime driver
-	  instead).
+	  Say M here if you want to use Sierra Wireless devices.
+
+	  Many deviecs have a feature known as TRU-Install, for those devices
+	  to work properly the USB Storage Sierra feature must be enabled.
 
 	  To compile this driver as a module, choose M here: the
 	  module will be called sierra.
diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c
index 838717250145..984f6eff4c47 100644
--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -563,6 +563,7 @@ static struct usb_device_id id_table_combined [] = {
 	{ USB_DEVICE(FTDI_VID, FTDI_ELV_FHZ1300PC_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_ELV_EM1010PC_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_ELV_WS500_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_ELV_HS485_PID) },
 	{ USB_DEVICE(FTDI_VID, LINX_SDMUSBQSS_PID) },
 	{ USB_DEVICE(FTDI_VID, LINX_MASTERDEVEL2_PID) },
 	{ USB_DEVICE(FTDI_VID, LINX_FUTURE_0_PID) },
@@ -637,6 +638,7 @@ static struct usb_device_id id_table_combined [] = {
 	{ USB_DEVICE(ELEKTOR_VID, ELEKTOR_FT323R_PID) },
 	{ USB_DEVICE(TELLDUS_VID, TELLDUS_TELLSTICK_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_MAXSTREAM_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_PHI_FISCO_PID) },
 	{ USB_DEVICE(TML_VID, TML_USB_SERIAL_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_ELSTER_UNICOM_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_PROPOX_JTAGCABLEII_PID) },
@@ -646,6 +648,10 @@ static struct usb_device_id id_table_combined [] = {
 		.driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
 	{ USB_DEVICE(FTDI_VID, FTDI_OOCDLINK_PID),
 		.driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
+	{ USB_DEVICE(FTDI_VID, LMI_LM3S_DEVEL_BOARD_PID),
+		.driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
+	{ USB_DEVICE(FTDI_VID, LMI_LM3S_EVAL_BOARD_PID),
+		.driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
 	{ USB_DEVICE(RATOC_VENDOR_ID, RATOC_PRODUCT_ID_USB60F) },
 	{ USB_DEVICE(FTDI_VID, FTDI_REU_TINY_PID) },
 	{ },					/* Optional parameter entry */
diff --git a/drivers/usb/serial/ftdi_sio.h b/drivers/usb/serial/ftdi_sio.h
index a577ea44dcf9..382265bba969 100644
--- a/drivers/usb/serial/ftdi_sio.h
+++ b/drivers/usb/serial/ftdi_sio.h
@@ -524,7 +524,9 @@
 #define FTDI_ELV_WS300PC_PID	0xE0F6	/* PC-Wetterstation (WS 300 PC) */
 #define FTDI_ELV_FHZ1300PC_PID	0xE0E8	/* FHZ 1300 PC */
 #define FTDI_ELV_WS500_PID	0xE0E9	/* PC-Wetterstation (WS 500) */
+#define FTDI_ELV_HS485_PID	0xE0EA	/* USB to RS-485 adapter */
 #define FTDI_ELV_EM1010PC_PID	0xE0EF	/* Engery monitor EM 1010 PC */
+#define FTDI_PHI_FISCO_PID      0xE40B  /* PHI Fisco USB to Serial cable */
 
 /*
  * Definitions for ID TECH (www.idt-net.com) devices
@@ -815,6 +817,11 @@
 #define OLIMEX_VID			0x15BA
 #define OLIMEX_ARM_USB_OCD_PID		0x0003
 
+/* Luminary Micro Stellaris Boards, VID = FTDI_VID */
+/* FTDI 2332C Dual channel device, side A=245 FIFO (JTAG), Side B=RS232 UART */
+#define LMI_LM3S_DEVEL_BOARD_PID	0xbcd8
+#define LMI_LM3S_EVAL_BOARD_PID		0xbcd9
+
 /* www.elsterelectricity.com Elster Unicom III Optical Probe */
 #define FTDI_ELSTER_UNICOM_PID		0xE700 /* Product Id */
 
diff --git a/drivers/usb/serial/garmin_gps.c b/drivers/usb/serial/garmin_gps.c
index 2e663f1afd5e..d95382088075 100644
--- a/drivers/usb/serial/garmin_gps.c
+++ b/drivers/usb/serial/garmin_gps.c
@@ -38,8 +38,6 @@
 #include <linux/usb.h>
 #include <linux/usb/serial.h>
 
-#include <linux/version.h>
-
 /* the mode to be set when the port ist opened */
 static int initial_mode = 1;
 
diff --git a/drivers/usb/serial/ipaq.c b/drivers/usb/serial/ipaq.c
index 832a5a4f3cb3..cd9a2e138c8b 100644
--- a/drivers/usb/serial/ipaq.c
+++ b/drivers/usb/serial/ipaq.c
@@ -651,15 +651,17 @@ static int ipaq_open(struct tty_struct *tty,
 	 */
 
 	kfree(port->bulk_in_buffer);
+	kfree(port->bulk_out_buffer);
+	/* make sure the generic serial code knows */
+	port->bulk_out_buffer = NULL;
+
 	port->bulk_in_buffer = kmalloc(URBDATA_SIZE, GFP_KERNEL);
-	if (port->bulk_in_buffer == NULL) {
-		port->bulk_out_buffer = NULL; /* prevent double free */
+	if (port->bulk_in_buffer == NULL)
 		goto enomem;
-	}
 
-	kfree(port->bulk_out_buffer);
 	port->bulk_out_buffer = kmalloc(URBDATA_SIZE, GFP_KERNEL);
 	if (port->bulk_out_buffer == NULL) {
+		/* the buffer is useless, free it */
 		kfree(port->bulk_in_buffer);
 		port->bulk_in_buffer = NULL;
 		goto enomem;
diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c
index e4eca95f2b0f..9f9cd36455f4 100644
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -173,6 +173,7 @@ static int  option_send_setup(struct tty_struct *tty, struct usb_serial_port *po
 #define KYOCERA_PRODUCT_KPC680			0x180a
 
 #define ANYDATA_VENDOR_ID			0x16d5
+#define ANYDATA_PRODUCT_ADU_620UW		0x6202
 #define ANYDATA_PRODUCT_ADU_E100A		0x6501
 #define ANYDATA_PRODUCT_ADU_500A		0x6502
 
@@ -186,6 +187,23 @@ static int  option_send_setup(struct tty_struct *tty, struct usb_serial_port *po
 #define BANDRICH_VENDOR_ID			0x1A8D
 #define BANDRICH_PRODUCT_C100_1			0x1002
 #define BANDRICH_PRODUCT_C100_2			0x1003
+#define BANDRICH_PRODUCT_1004			0x1004
+#define BANDRICH_PRODUCT_1005			0x1005
+#define BANDRICH_PRODUCT_1006			0x1006
+#define BANDRICH_PRODUCT_1007			0x1007
+#define BANDRICH_PRODUCT_1008			0x1008
+#define BANDRICH_PRODUCT_1009			0x1009
+#define BANDRICH_PRODUCT_100A			0x100a
+
+#define BANDRICH_PRODUCT_100B			0x100b
+#define BANDRICH_PRODUCT_100C			0x100c
+#define BANDRICH_PRODUCT_100D			0x100d
+#define BANDRICH_PRODUCT_100E			0x100e
+
+#define BANDRICH_PRODUCT_100F			0x100f
+#define BANDRICH_PRODUCT_1010			0x1010
+#define BANDRICH_PRODUCT_1011			0x1011
+#define BANDRICH_PRODUCT_1012			0x1012
 
 #define AMOI_VENDOR_ID			0x1614
 #define AMOI_PRODUCT_9508			0x0800
@@ -197,6 +215,10 @@ static int  option_send_setup(struct tty_struct *tty, struct usb_serial_port *po
 #define TELIT_VENDOR_ID				0x1bc7
 #define TELIT_PRODUCT_UC864E			0x1003
 
+/* ZTE PRODUCTS */
+#define ZTE_VENDOR_ID				0x19d2
+#define ZTE_PRODUCT_MF628			0x0015
+
 static struct usb_device_id option_ids[] = {
 	{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_COLT) },
 	{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_RICOLA) },
@@ -297,17 +319,34 @@ static struct usb_device_id option_ids[] = {
 	{ USB_DEVICE(DELL_VENDOR_ID, 0x8138) },	/* Dell Wireless 5520 Voda I Mobile Broadband (3G HSDPA) Minicard */
 	{ USB_DEVICE(ANYDATA_VENDOR_ID, ANYDATA_PRODUCT_ADU_E100A) },
 	{ USB_DEVICE(ANYDATA_VENDOR_ID, ANYDATA_PRODUCT_ADU_500A) },
+	{ USB_DEVICE(ANYDATA_VENDOR_ID, ANYDATA_PRODUCT_ADU_620UW) },
 	{ USB_DEVICE(AXESSTEL_VENDOR_ID, AXESSTEL_PRODUCT_MV110H) },
 	{ USB_DEVICE(ONDA_VENDOR_ID, ONDA_PRODUCT_MSA501HS) },
 	{ USB_DEVICE(ONDA_VENDOR_ID, ONDA_PRODUCT_ET502HS) },
 	{ USB_DEVICE(BANDRICH_VENDOR_ID, BANDRICH_PRODUCT_C100_1) },
 	{ USB_DEVICE(BANDRICH_VENDOR_ID, BANDRICH_PRODUCT_C100_2) },
+	{ USB_DEVICE(BANDRICH_VENDOR_ID, BANDRICH_PRODUCT_1004) },
+	{ USB_DEVICE(BANDRICH_VENDOR_ID, BANDRICH_PRODUCT_1005) },
+	{ USB_DEVICE(BANDRICH_VENDOR_ID, BANDRICH_PRODUCT_1006) },
+	{ USB_DEVICE(BANDRICH_VENDOR_ID, BANDRICH_PRODUCT_1007) },
+	{ USB_DEVICE(BANDRICH_VENDOR_ID, BANDRICH_PRODUCT_1008) },
+	{ USB_DEVICE(BANDRICH_VENDOR_ID, BANDRICH_PRODUCT_1009) },
+	{ USB_DEVICE(BANDRICH_VENDOR_ID, BANDRICH_PRODUCT_100A) },
+	{ USB_DEVICE(BANDRICH_VENDOR_ID, BANDRICH_PRODUCT_100B) },
+	{ USB_DEVICE(BANDRICH_VENDOR_ID, BANDRICH_PRODUCT_100C) },
+	{ USB_DEVICE(BANDRICH_VENDOR_ID, BANDRICH_PRODUCT_100D) },
+	{ USB_DEVICE(BANDRICH_VENDOR_ID, BANDRICH_PRODUCT_100E) },
+	{ USB_DEVICE(BANDRICH_VENDOR_ID, BANDRICH_PRODUCT_100F) },
+	{ USB_DEVICE(BANDRICH_VENDOR_ID, BANDRICH_PRODUCT_1010) },
+	{ USB_DEVICE(BANDRICH_VENDOR_ID, BANDRICH_PRODUCT_1011) },
+	{ USB_DEVICE(BANDRICH_VENDOR_ID, BANDRICH_PRODUCT_1012) },
 	{ USB_DEVICE(KYOCERA_VENDOR_ID, KYOCERA_PRODUCT_KPC650) },
 	{ USB_DEVICE(KYOCERA_VENDOR_ID, KYOCERA_PRODUCT_KPC680) },
 	{ USB_DEVICE(QUALCOMM_VENDOR_ID, 0x6000)}, /* ZTE AC8700 */
 	{ USB_DEVICE(QUALCOMM_VENDOR_ID, 0x6613)}, /* Onda H600/ZTE MF330 */
 	{ USB_DEVICE(MAXON_VENDOR_ID, 0x6280) }, /* BP3-USB & BP3-EXT HSDPA */
 	{ USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_UC864E) },
+	{ USB_DEVICE(ZTE_VENDOR_ID, ZTE_PRODUCT_MF628) },
 	{ } /* Terminating entry */
 };
 MODULE_DEVICE_TABLE(usb, option_ids);
@@ -346,11 +385,7 @@ static struct usb_serial_driver option_1port_device = {
 	.read_int_callback = option_instat_callback,
 };
 
-#ifdef CONFIG_USB_DEBUG
 static int debug;
-#else
-#define debug 0
-#endif
 
 /* per port private data */
 
@@ -954,8 +989,5 @@ MODULE_DESCRIPTION(DRIVER_DESC);
 MODULE_VERSION(DRIVER_VERSION);
 MODULE_LICENSE("GPL");
 
-#ifdef CONFIG_USB_DEBUG
 module_param(debug, bool, S_IRUGO | S_IWUSR);
 MODULE_PARM_DESC(debug, "Debug messages");
-#endif
-
diff --git a/drivers/usb/serial/pl2303.c b/drivers/usb/serial/pl2303.c
index 2c9c446ad625..1ede1441cb1b 100644
--- a/drivers/usb/serial/pl2303.c
+++ b/drivers/usb/serial/pl2303.c
@@ -90,7 +90,6 @@ static struct usb_device_id id_table [] = {
 	{ USB_DEVICE(ALCOR_VENDOR_ID, ALCOR_PRODUCT_ID) },
 	{ USB_DEVICE(WS002IN_VENDOR_ID, WS002IN_PRODUCT_ID) },
 	{ USB_DEVICE(COREGA_VENDOR_ID, COREGA_PRODUCT_ID) },
-	{ USB_DEVICE(HL340_VENDOR_ID, HL340_PRODUCT_ID) },
 	{ USB_DEVICE(YCCABLE_VENDOR_ID, YCCABLE_PRODUCT_ID) },
 	{ }					/* Terminating entry */
 };
diff --git a/drivers/usb/serial/pl2303.h b/drivers/usb/serial/pl2303.h
index 6ac3bbcf7a22..a3bd039c78e9 100644
--- a/drivers/usb/serial/pl2303.h
+++ b/drivers/usb/serial/pl2303.h
@@ -107,10 +107,6 @@
 #define COREGA_VENDOR_ID	0x07aa
 #define COREGA_PRODUCT_ID	0x002a
 
-/* HL HL-340 (ID: 4348:5523) */
-#define HL340_VENDOR_ID		0x4348
-#define HL340_PRODUCT_ID	0x5523
-
 /* Y.C. Cable U.S.A., Inc - USB to RS-232 */
 #define YCCABLE_VENDOR_ID	0x05ad
 #define YCCABLE_PRODUCT_ID	0x0fba
diff --git a/drivers/usb/serial/sierra.c b/drivers/usb/serial/sierra.c
index 2f6f1523ec56..706033753adb 100644
--- a/drivers/usb/serial/sierra.c
+++ b/drivers/usb/serial/sierra.c
@@ -14,7 +14,7 @@
   Whom based his on the Keyspan driver by Hugh Blemings <hugh@blemings.org>
 */
 
-#define DRIVER_VERSION "v.1.2.9c"
+#define DRIVER_VERSION "v.1.2.13a"
 #define DRIVER_AUTHOR "Kevin Lloyd <klloyd@sierrawireless.com>"
 #define DRIVER_DESC "USB Driver for Sierra Wireless USB modems"
 
@@ -31,6 +31,7 @@
 #define SWIMS_USB_REQUEST_SetPower	0x00
 #define SWIMS_USB_REQUEST_SetNmea	0x07
 #define SWIMS_USB_REQUEST_SetMode	0x0B
+#define SWIMS_USB_REQUEST_GetSwocInfo	0x0A
 #define SWIMS_SET_MODE_Modem		0x0001
 
 /* per port private data */
@@ -40,18 +41,11 @@
 
 static int debug;
 static int nmea;
-static int truinstall = 1;
-
-enum devicetype {
-	DEVICE_3_PORT =		0,
-	DEVICE_1_PORT =		1,
-	DEVICE_INSTALLER =	2,
-};
 
 static int sierra_set_power_state(struct usb_device *udev, __u16 swiState)
 {
 	int result;
-	dev_dbg(&udev->dev, "%s", "SET POWER STATE\n");
+	dev_dbg(&udev->dev, "%s", __func__);
 	result = usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
 			SWIMS_USB_REQUEST_SetPower,	/* __u8 request      */
 			USB_TYPE_VENDOR,		/* __u8 request type */
@@ -63,25 +57,10 @@ static int sierra_set_power_state(struct usb_device *udev, __u16 swiState)
 	return result;
 }
 
-static int sierra_set_ms_mode(struct usb_device *udev, __u16 eSWocMode)
-{
-	int result;
-	dev_dbg(&udev->dev, "%s", "DEVICE MODE SWITCH\n");
-	result = usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
-			SWIMS_USB_REQUEST_SetMode,	/* __u8 request      */
-			USB_TYPE_VENDOR,		/* __u8 request type */
-			eSWocMode,			/* __u16 value       */
-			0x0000,				/* __u16 index       */
-			NULL,				/* void *data        */
-			0,				/* __u16 size 	     */
-			USB_CTRL_SET_TIMEOUT);		/* int timeout       */
-	return result;
-}
-
 static int sierra_vsc_set_nmea(struct usb_device *udev, __u16 enable)
 {
 	int result;
-	dev_dbg(&udev->dev, "%s", "NMEA Enable sent\n");
+	dev_dbg(&udev->dev, "%s", __func__);
 	result = usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
 			SWIMS_USB_REQUEST_SetNmea,	/* __u8 request      */
 			USB_TYPE_VENDOR,		/* __u8 request type */
@@ -97,6 +76,7 @@ static int sierra_calc_num_ports(struct usb_serial *serial)
 {
 	int result;
 	int *num_ports = usb_get_serial_data(serial);
+	dev_dbg(&serial->dev->dev, "%s", __func__);
 
 	result = *num_ports;
 
@@ -110,22 +90,23 @@ static int sierra_calc_num_ports(struct usb_serial *serial)
 
 static int sierra_calc_interface(struct usb_serial *serial)
 {
-		int interface;
-		struct usb_interface *p_interface;
-		struct usb_host_interface *p_host_interface;
+	int interface;
+	struct usb_interface *p_interface;
+	struct usb_host_interface *p_host_interface;
+	dev_dbg(&serial->dev->dev, "%s", __func__);
 
-		/* Get the interface structure pointer from the serial struct */
-		p_interface = serial->interface;
+	/* Get the interface structure pointer from the serial struct */
+	p_interface = serial->interface;
 
-		/* Get a pointer to the host interface structure */
-		p_host_interface = p_interface->cur_altsetting;
+	/* Get a pointer to the host interface structure */
+	p_host_interface = p_interface->cur_altsetting;
 
-		/* read the interface descriptor for this active altsetting
-		 * to find out the interface number we are on
-		*/
-		interface = p_host_interface->desc.bInterfaceNumber;
+	/* read the interface descriptor for this active altsetting
+	 * to find out the interface number we are on
+	*/
+	interface = p_host_interface->desc.bInterfaceNumber;
 
-		return interface;
+	return interface;
 }
 
 static int sierra_probe(struct usb_serial *serial,
@@ -135,43 +116,40 @@ static int sierra_probe(struct usb_serial *serial,
 	struct usb_device *udev;
 	int *num_ports;
 	u8 ifnum;
+	u8 numendpoints;
+
+	dev_dbg(&serial->dev->dev, "%s", __func__);
 
 	num_ports = kmalloc(sizeof(*num_ports), GFP_KERNEL);
 	if (!num_ports)
 		return -ENOMEM;
 
 	ifnum = serial->interface->cur_altsetting->desc.bInterfaceNumber;
+	numendpoints = serial->interface->cur_altsetting->desc.bNumEndpoints;
 	udev = serial->dev;
 
-		/* Figure out the interface number from the serial structure */
-		ifnum = sierra_calc_interface(serial);
-
-		/*
-		 * If this interface supports more than 1 alternate
-		 * select the 2nd one
-		 */
-		if (serial->interface->num_altsetting == 2) {
-			dev_dbg(&udev->dev,
-				"Selecting alt setting for interface %d\n",
-				ifnum);
+	/* Figure out the interface number from the serial structure */
+	ifnum = sierra_calc_interface(serial);
 
-			/* We know the alternate setting is 1 for the MC8785 */
-			usb_set_interface(udev, ifnum, 1);
-		}
+	/*
+	 * If this interface supports more than 1 alternate
+	 * select the 2nd one
+	 */
+	if (serial->interface->num_altsetting == 2) {
+		dev_dbg(&udev->dev, "Selecting alt setting for interface %d\n",
+			ifnum);
+		/* We know the alternate setting is 1 for the MC8785 */
+		usb_set_interface(udev, ifnum, 1);
+	}
 
-	/* Check if in installer mode */
-	if (truinstall && id->driver_info == DEVICE_INSTALLER) {
-		dev_dbg(&udev->dev, "%s", "FOUND TRU-INSTALL DEVICE(SW)\n");
-		result = sierra_set_ms_mode(udev, SWIMS_SET_MODE_Modem);
-		/* Don't bind to the device when in installer mode */
-		kfree(num_ports);
-		return -EIO;
-	} else if (id->driver_info == DEVICE_1_PORT)
-		*num_ports = 1;
-	else if (ifnum == 0x99)
+	/* Dummy interface present on some SKUs should be ignored */
+	if (ifnum == 0x99)
 		*num_ports = 0;
+	else if (numendpoints <= 3)
+		*num_ports = 1;
 	else
-		*num_ports = 3;
+		*num_ports = (numendpoints-1)/2;
+
 	/*
 	 * save off our num_ports info so that we can use it in the
 	 * calc_num_ports callback
@@ -187,40 +165,50 @@ static struct usb_device_id id_table [] = {
 	{ USB_DEVICE(0x1199, 0x0218) },	/* Sierra Wireless MC5720 */
 	{ USB_DEVICE(0x0f30, 0x1b1d) },	/* Sierra Wireless MC5720 */
 	{ USB_DEVICE(0x1199, 0x0020) },	/* Sierra Wireless MC5725 */
+	{ USB_DEVICE(0x1199, 0x0024) },	/* Sierra Wireless MC5727 */
 	{ USB_DEVICE(0x1199, 0x0220) },	/* Sierra Wireless MC5725 */
 	{ USB_DEVICE(0x1199, 0x0019) },	/* Sierra Wireless AirCard 595 */
 	{ USB_DEVICE(0x1199, 0x0021) },	/* Sierra Wireless AirCard 597E */
 	{ USB_DEVICE(0x1199, 0x0120) },	/* Sierra Wireless USB Dongle 595U */
-	{ USB_DEVICE_AND_INTERFACE_INFO(0x1199, 0x0023, 0xFF, 0xFF, 0xFF) }, /* Sierra Wireless C597 */
+	 /* Sierra Wireless C597 */
+	{ USB_DEVICE_AND_INTERFACE_INFO(0x1199, 0x0023, 0xFF, 0xFF, 0xFF) },
+	 /* Sierra Wireless Device */
+	{ USB_DEVICE_AND_INTERFACE_INFO(0x1199, 0x0025, 0xFF, 0xFF, 0xFF) },
+	{ USB_DEVICE(0x1199, 0x0026) }, /* Sierra Wireless Device */
 
 	{ USB_DEVICE(0x1199, 0x6802) },	/* Sierra Wireless MC8755 */
 	{ USB_DEVICE(0x1199, 0x6804) },	/* Sierra Wireless MC8755 */
 	{ USB_DEVICE(0x1199, 0x6803) },	/* Sierra Wireless MC8765 */
 	{ USB_DEVICE(0x1199, 0x6812) },	/* Sierra Wireless MC8775 & AC 875U */
-	{ USB_DEVICE(0x1199, 0x6813) },	/* Sierra Wireless MC8775 (Thinkpad internal) */
+	{ USB_DEVICE(0x1199, 0x6813) },	/* Sierra Wireless MC8775 (Lenovo) */
 	{ USB_DEVICE(0x1199, 0x6815) },	/* Sierra Wireless MC8775 */
 	{ USB_DEVICE(0x03f0, 0x1e1d) },	/* HP hs2300 a.k.a MC8775 */
 	{ USB_DEVICE(0x1199, 0x6820) },	/* Sierra Wireless AirCard 875 */
 	{ USB_DEVICE(0x1199, 0x6821) },	/* Sierra Wireless AirCard 875U */
-	{ USB_DEVICE(0x1199, 0x6832) },	/* Sierra Wireless MC8780*/
-	{ USB_DEVICE(0x1199, 0x6833) },	/* Sierra Wireless MC8781*/
-	{ USB_DEVICE(0x1199, 0x683B), .driver_info = DEVICE_1_PORT },	/* Sierra Wireless MC8785 Composite*/
+	{ USB_DEVICE(0x1199, 0x6832) },	/* Sierra Wireless MC8780 */
+	{ USB_DEVICE(0x1199, 0x6833) },	/* Sierra Wireless MC8781 */
+	{ USB_DEVICE(0x1199, 0x683B) },	/* Sierra Wireless MC8785 Composite */
+	{ USB_DEVICE(0x1199, 0x683C) },	/* Sierra Wireless MC8790 */
+	{ USB_DEVICE(0x1199, 0x683D) },	/* Sierra Wireless MC8790 */
+	{ USB_DEVICE(0x1199, 0x683E) },	/* Sierra Wireless MC8790 */
 	{ USB_DEVICE(0x1199, 0x6850) },	/* Sierra Wireless AirCard 880 */
 	{ USB_DEVICE(0x1199, 0x6851) },	/* Sierra Wireless AirCard 881 */
 	{ USB_DEVICE(0x1199, 0x6852) },	/* Sierra Wireless AirCard 880 E */
 	{ USB_DEVICE(0x1199, 0x6853) },	/* Sierra Wireless AirCard 881 E */
 	{ USB_DEVICE(0x1199, 0x6855) },	/* Sierra Wireless AirCard 880 U */
 	{ USB_DEVICE(0x1199, 0x6856) },	/* Sierra Wireless AirCard 881 U */
-	{ USB_DEVICE(0x1199, 0x6859), .driver_info = DEVICE_1_PORT },	/* Sierra Wireless AirCard 885 E */
-	{ USB_DEVICE(0x1199, 0x685A), .driver_info = DEVICE_1_PORT },	/* Sierra Wireless AirCard 885 E */
-
-	{ USB_DEVICE(0x1199, 0x6468) }, /* Sierra Wireless MP3G - EVDO */
-	{ USB_DEVICE(0x1199, 0x6469) }, /* Sierra Wireless MP3G - UMTS/HSPA */
-
-	{ USB_DEVICE(0x1199, 0x0112), .driver_info = DEVICE_1_PORT }, /* Sierra Wireless AirCard 580 */
-	{ USB_DEVICE(0x0F3D, 0x0112), .driver_info = DEVICE_1_PORT }, /* Airprime/Sierra PC 5220 */
+	{ USB_DEVICE(0x1199, 0x6859) },	/* Sierra Wireless AirCard 885 E */
+	{ USB_DEVICE(0x1199, 0x685A) },	/* Sierra Wireless AirCard 885 E */
+	/* Sierra Wireless C885 */
+	{ USB_DEVICE_AND_INTERFACE_INFO(0x1199, 0x6880, 0xFF, 0xFF, 0xFF)},
+	/* Sierra Wireless Device */
+	{ USB_DEVICE_AND_INTERFACE_INFO(0x1199, 0x6890, 0xFF, 0xFF, 0xFF)},
+	/* Sierra Wireless Device */
+	{ USB_DEVICE_AND_INTERFACE_INFO(0x1199, 0x6892, 0xFF, 0xFF, 0xFF)},
+
+	{ USB_DEVICE(0x1199, 0x0112) }, /* Sierra Wireless AirCard 580 */
+	{ USB_DEVICE(0x0F3D, 0x0112) }, /* Airprime/Sierra PC 5220 */
 
-	{ USB_DEVICE(0x1199, 0x0FFF), .driver_info = DEVICE_INSTALLER},
 	{ }
 };
 MODULE_DEVICE_TABLE(usb, id_table);
@@ -268,13 +256,19 @@ static int sierra_send_setup(struct tty_struct *tty,
 		if (portdata->rts_state)
 			val |= 0x02;
 
-		/* Determine which port is targeted */
-		if (port->bulk_out_endpointAddress == 2)
-			interface = 0;
-		else if (port->bulk_out_endpointAddress == 4)
-			interface = 1;
-		else if (port->bulk_out_endpointAddress == 5)
-			interface = 2;
+		/* If composite device then properly report interface */
+		if (serial->num_ports == 1)
+			interface = sierra_calc_interface(serial);
+
+		/* Otherwise the need to do non-composite mapping */
+		else {
+			if (port->bulk_out_endpointAddress == 2)
+				interface = 0;
+			else if (port->bulk_out_endpointAddress == 4)
+				interface = 1;
+			else if (port->bulk_out_endpointAddress == 5)
+				interface = 2;
+		}
 
 		return usb_control_msg(serial->dev,
 				usb_rcvctrlpipe(serial->dev, 0),
@@ -713,7 +707,7 @@ static void sierra_shutdown(struct usb_serial *serial)
 static struct usb_serial_driver sierra_device = {
 	.driver = {
 		.owner =	THIS_MODULE,
-		.name =		"sierra1",
+		.name =		"sierra",
 	},
 	.description       = "Sierra USB modem",
 	.id_table          = id_table,
@@ -769,14 +763,8 @@ MODULE_DESCRIPTION(DRIVER_DESC);
 MODULE_VERSION(DRIVER_VERSION);
 MODULE_LICENSE("GPL");
 
-module_param(truinstall, bool, 0);
-MODULE_PARM_DESC(truinstall, "TRU-Install support");
-
-module_param(nmea, bool, 0);
+module_param(nmea, bool, S_IRUGO | S_IWUSR);
 MODULE_PARM_DESC(nmea, "NMEA streaming");
 
-#ifdef CONFIG_USB_DEBUG
 module_param(debug, bool, S_IRUGO | S_IWUSR);
 MODULE_PARM_DESC(debug, "Debug messages");
-#endif
-
diff --git a/drivers/usb/serial/usb-serial.c b/drivers/usb/serial/usb-serial.c
index 8c2d531eedea..b157c48e8b78 100644
--- a/drivers/usb/serial/usb-serial.c
+++ b/drivers/usb/serial/usb-serial.c
@@ -122,9 +122,6 @@ static void return_serial(struct usb_serial *serial)
 
 	dbg("%s", __func__);
 
-	if (serial == NULL)
-		return;
-
 	for (i = 0; i < serial->num_ports; ++i)
 		serial_table[serial->minor + i] = NULL;
 }
@@ -142,7 +139,8 @@ static void destroy_serial(struct kref *kref)
 	serial->type->shutdown(serial);
 
 	/* return the minor range that this device had */
-	return_serial(serial);
+	if (serial->minor != SERIAL_TTY_NO_MINOR)
+		return_serial(serial);
 
 	for (i = 0; i < serial->num_ports; ++i)
 		serial->port[i]->port.count = 0;
@@ -575,6 +573,7 @@ static struct usb_serial *create_serial(struct usb_device *dev,
 	serial->interface = interface;
 	kref_init(&serial->kref);
 	mutex_init(&serial->disc_mutex);
+	serial->minor = SERIAL_TTY_NO_MINOR;
 
 	return serial;
 }
diff --git a/drivers/usb/storage/Kconfig b/drivers/usb/storage/Kconfig
index 3d9249632ae1..c76034672c18 100644
--- a/drivers/usb/storage/Kconfig
+++ b/drivers/usb/storage/Kconfig
@@ -146,6 +146,18 @@ config USB_STORAGE_KARMA
 	  on the resulting scsi device node returns the Karma to normal
 	  operation.
 
+config USB_STORAGE_SIERRA
+	bool "Sierra Wireless TRU-Install Feature Support"
+	depends on USB_STORAGE
+	help
+	  Say Y here to include additional code to support Sierra Wireless
+	  products with the TRU-Install feature (e.g., AC597E, AC881U).
+
+	  This code switches the Sierra Wireless device from being in
+	  Mass Storage mode to Modem mode. It also has the ability to
+	  support host software upgrades should full Linux support be added
+	  to TRU-Install.
+
 config USB_STORAGE_CYPRESS_ATACB
 	bool "SAT emulation on Cypress USB/ATA Bridge with ATACB"
 	depends on USB_STORAGE
diff --git a/drivers/usb/storage/Makefile b/drivers/usb/storage/Makefile
index 4c596c766c53..bc3415b475c9 100644
--- a/drivers/usb/storage/Makefile
+++ b/drivers/usb/storage/Makefile
@@ -21,6 +21,7 @@ usb-storage-obj-$(CONFIG_USB_STORAGE_JUMPSHOT)	+= jumpshot.o
 usb-storage-obj-$(CONFIG_USB_STORAGE_ALAUDA)	+= alauda.o
 usb-storage-obj-$(CONFIG_USB_STORAGE_ONETOUCH)	+= onetouch.o
 usb-storage-obj-$(CONFIG_USB_STORAGE_KARMA)	+= karma.o
+usb-storage-obj-$(CONFIG_USB_STORAGE_SIERRA)	+= sierra_ms.o
 usb-storage-obj-$(CONFIG_USB_STORAGE_CYPRESS_ATACB) += cypress_atacb.o
 
 usb-storage-objs :=	scsiglue.o protocol.o transport.o usb.o \
diff --git a/drivers/usb/storage/freecom.c b/drivers/usb/storage/freecom.c
index 7a4d45677227..73ac7262239e 100644
--- a/drivers/usb/storage/freecom.c
+++ b/drivers/usb/storage/freecom.c
@@ -26,8 +26,6 @@
  * (http://www.freecom.de/)
  */
 
-#include <linux/hdreg.h>
-
 #include <scsi/scsi.h>
 #include <scsi/scsi_cmnd.h>
 
diff --git a/drivers/usb/storage/sierra_ms.c b/drivers/usb/storage/sierra_ms.c
new file mode 100644
index 000000000000..4359a2cb42df
--- /dev/null
+++ b/drivers/usb/storage/sierra_ms.c
@@ -0,0 +1,207 @@
+#include <scsi/scsi.h>
+#include <scsi/scsi_host.h>
+#include <scsi/scsi_cmnd.h>
+#include <scsi/scsi_device.h>
+#include <linux/usb.h>
+
+#include "usb.h"
+#include "transport.h"
+#include "protocol.h"
+#include "scsiglue.h"
+#include "sierra_ms.h"
+#include "debug.h"
+
+#define SWIMS_USB_REQUEST_SetSwocMode	0x0B
+#define SWIMS_USB_REQUEST_GetSwocInfo	0x0A
+#define SWIMS_USB_INDEX_SetMode		0x0000
+#define SWIMS_SET_MODE_Modem		0x0001
+
+#define TRU_NORMAL 			0x01
+#define TRU_FORCE_MS 			0x02
+#define TRU_FORCE_MODEM 		0x03
+
+static unsigned int swi_tru_install = 1;
+module_param(swi_tru_install, uint, S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(swi_tru_install, "TRU-Install mode (1=Full Logic (def),"
+		 " 2=Force CD-Rom, 3=Force Modem)");
+
+struct swoc_info {
+	__u8 rev;
+	__u8 reserved[8];
+	__u16 LinuxSKU;
+	__u16 LinuxVer;
+	__u8 reserved2[47];
+} __attribute__((__packed__));
+
+static bool containsFullLinuxPackage(struct swoc_info *swocInfo)
+{
+	if ((swocInfo->LinuxSKU >= 0x2100 && swocInfo->LinuxSKU <= 0x2FFF) ||
+	   (swocInfo->LinuxSKU >= 0x7100 && swocInfo->LinuxSKU <= 0x7FFF))
+		return true;
+	else
+		return false;
+}
+
+static int sierra_set_ms_mode(struct usb_device *udev, __u16 eSWocMode)
+{
+	int result;
+	US_DEBUGP("SWIMS: %s", "DEVICE MODE SWITCH\n");
+	result = usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
+			SWIMS_USB_REQUEST_SetSwocMode,	/* __u8 request      */
+			USB_TYPE_VENDOR | USB_DIR_OUT,	/* __u8 request type */
+			eSWocMode,			/* __u16 value       */
+			0x0000,				/* __u16 index       */
+			NULL,				/* void *data        */
+			0,				/* __u16 size 	     */
+			USB_CTRL_SET_TIMEOUT);		/* int timeout       */
+	return result;
+}
+
+
+static int sierra_get_swoc_info(struct usb_device *udev,
+				struct swoc_info *swocInfo)
+{
+	int result;
+
+	US_DEBUGP("SWIMS: Attempting to get TRU-Install info.\n");
+
+	result = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0),
+			SWIMS_USB_REQUEST_GetSwocInfo,	/* __u8 request      */
+			USB_TYPE_VENDOR | USB_DIR_IN,	/* __u8 request type */
+			0,				/* __u16 value       */
+			0,				/* __u16 index       */
+			(void *) swocInfo,		/* void *data        */
+			sizeof(struct swoc_info),	/* __u16 size 	     */
+			USB_CTRL_SET_TIMEOUT);		/* int timeout 	     */
+
+	swocInfo->LinuxSKU = le16_to_cpu(swocInfo->LinuxSKU);
+	swocInfo->LinuxVer = le16_to_cpu(swocInfo->LinuxVer);
+	return result;
+}
+
+static void debug_swoc(struct swoc_info *swocInfo)
+{
+	US_DEBUGP("SWIMS: SWoC Rev: %02d \n", swocInfo->rev);
+	US_DEBUGP("SWIMS: Linux SKU: %04X \n", swocInfo->LinuxSKU);
+	US_DEBUGP("SWIMS: Linux Version: %04X \n", swocInfo->LinuxVer);
+}
+
+
+static ssize_t show_truinst(struct device *dev, struct device_attribute *attr,
+			char *buf)
+{
+	struct swoc_info *swocInfo;
+	struct usb_interface *intf = to_usb_interface(dev);
+	struct usb_device *udev = interface_to_usbdev(intf);
+	int result;
+	if (swi_tru_install == TRU_FORCE_MS) {
+		result = snprintf(buf, PAGE_SIZE, "Forced Mass Storage\n");
+	} else {
+		swocInfo = kmalloc(sizeof(struct swoc_info), GFP_KERNEL);
+		if (!swocInfo) {
+			US_DEBUGP("SWIMS: Allocation failure\n");
+			snprintf(buf, PAGE_SIZE, "Error\n");
+			return -ENOMEM;
+		}
+		result = sierra_get_swoc_info(udev, swocInfo);
+		if (result < 0) {
+			US_DEBUGP("SWIMS: failed SWoC query\n");
+			kfree(swocInfo);
+			snprintf(buf, PAGE_SIZE, "Error\n");
+			return -EIO;
+		}
+		debug_swoc(swocInfo);
+		result = snprintf(buf, PAGE_SIZE,
+			"REV=%02d SKU=%04X VER=%04X\n",
+			swocInfo->rev,
+			swocInfo->LinuxSKU,
+			swocInfo->LinuxVer);
+		kfree(swocInfo);
+	}
+	return result;
+}
+static DEVICE_ATTR(truinst, S_IWUGO | S_IRUGO, show_truinst, NULL);
+
+int sierra_ms_init(struct us_data *us)
+{
+	int result, retries;
+	signed long delay_t;
+	struct swoc_info *swocInfo;
+	struct usb_device *udev;
+	struct Scsi_Host *sh;
+	struct scsi_device *sd;
+
+	delay_t = 2;
+	retries = 3;
+	result = 0;
+	udev = us->pusb_dev;
+
+	sh = us_to_host(us);
+	sd = scsi_get_host_dev(sh);
+
+	US_DEBUGP("SWIMS: sierra_ms_init called\n");
+
+	/* Force Modem mode */
+	if (swi_tru_install == TRU_FORCE_MODEM) {
+		US_DEBUGP("SWIMS: %s", "Forcing Modem Mode\n");
+		result = sierra_set_ms_mode(udev, SWIMS_SET_MODE_Modem);
+		if (result < 0)
+			US_DEBUGP("SWIMS: Failed to switch to modem mode.\n");
+		return -EIO;
+	}
+	/* Force Mass Storage mode (keep CD-Rom) */
+	else if (swi_tru_install == TRU_FORCE_MS) {
+		US_DEBUGP("SWIMS: %s", "Forcing Mass Storage Mode\n");
+		goto complete;
+	}
+	/* Normal TRU-Install Logic */
+	else {
+		US_DEBUGP("SWIMS: %s", "Normal SWoC Logic\n");
+
+		swocInfo = kmalloc(sizeof(struct swoc_info),
+				GFP_KERNEL);
+		if (!swocInfo) {
+			US_DEBUGP("SWIMS: %s", "Allocation failure\n");
+			return -ENOMEM;
+		}
+
+		retries = 3;
+		do {
+			retries--;
+			result = sierra_get_swoc_info(udev, swocInfo);
+			if (result < 0) {
+				US_DEBUGP("SWIMS: %s", "Failed SWoC query\n");
+				schedule_timeout_uninterruptible(2*HZ);
+			}
+		} while (retries && result < 0);
+
+		if (result < 0) {
+			US_DEBUGP("SWIMS: %s",
+				  "Completely failed SWoC query\n");
+			kfree(swocInfo);
+			return -EIO;
+		}
+
+		debug_swoc(swocInfo);
+
+		/* If there is not Linux software on the TRU-Install device
+		 * then switch to modem mode
+		 */
+		if (!containsFullLinuxPackage(swocInfo)) {
+			US_DEBUGP("SWIMS: %s",
+				"Switching to Modem Mode\n");
+			result = sierra_set_ms_mode(udev,
+				SWIMS_SET_MODE_Modem);
+			if (result < 0)
+				US_DEBUGP("SWIMS: Failed to switch modem\n");
+			kfree(swocInfo);
+			return -EIO;
+		}
+		kfree(swocInfo);
+	}
+complete:
+	result = device_create_file(&us->pusb_intf->dev, &dev_attr_truinst);
+
+	return USB_STOR_TRANSPORT_GOOD;
+}
+
diff --git a/drivers/usb/storage/sierra_ms.h b/drivers/usb/storage/sierra_ms.h
new file mode 100644
index 000000000000..bb48634ac1fc
--- /dev/null
+++ b/drivers/usb/storage/sierra_ms.h
@@ -0,0 +1,4 @@
+#ifndef _SIERRA_MS_H_
+#define _SIERRA_MS_H_
+extern int sierra_ms_init(struct us_data *us);
+#endif
diff --git a/drivers/usb/storage/transport.c b/drivers/usb/storage/transport.c
index fcbbfdb7b2b0..3523a0bfa0ff 100644
--- a/drivers/usb/storage/transport.c
+++ b/drivers/usb/storage/transport.c
@@ -1032,8 +1032,21 @@ int usb_stor_Bulk_transport(struct scsi_cmnd *srb, struct us_data *us)
 
 	/* try to compute the actual residue, based on how much data
 	 * was really transferred and what the device tells us */
-	if (residue) {
-		if (!(us->fflags & US_FL_IGNORE_RESIDUE)) {
+	if (residue && !(us->fflags & US_FL_IGNORE_RESIDUE)) {
+
+		/* Heuristically detect devices that generate bogus residues
+		 * by seeing what happens with INQUIRY and READ CAPACITY
+		 * commands.
+		 */
+		if (bcs->Status == US_BULK_STAT_OK &&
+				scsi_get_resid(srb) == 0 &&
+					((srb->cmnd[0] == INQUIRY &&
+						transfer_length == 36) ||
+					(srb->cmnd[0] == READ_CAPACITY &&
+						transfer_length == 8))) {
+			us->fflags |= US_FL_IGNORE_RESIDUE;
+
+		} else {
 			residue = min(residue, transfer_length);
 			scsi_set_resid(srb, max(scsi_get_resid(srb),
 			                                       (int) residue));
diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h
index 7ae69f55aa96..ba412e68d474 100644
--- a/drivers/usb/storage/unusual_devs.h
+++ b/drivers/usb/storage/unusual_devs.h
@@ -225,6 +225,13 @@ UNUSUAL_DEV(  0x0421, 0x0495, 0x0370, 0x0370,
 		US_SC_DEVICE, US_PR_DEVICE, NULL,
 		US_FL_MAX_SECTORS_64 ),
 
+/* Reported by Cedric Godin <cedric@belbone.be> */
+UNUSUAL_DEV(  0x0421, 0x04b9, 0x0551, 0x0551,
+		"Nokia",
+		"5300",
+		US_SC_DEVICE, US_PR_DEVICE, NULL,
+		US_FL_FIX_CAPACITY ),
+
 /* Reported by Olaf Hering <olh@suse.de> from novell bug #105878 */
 UNUSUAL_DEV(  0x0424, 0x0fdc, 0x0210, 0x0210,
 		"SMSC",
@@ -356,14 +363,14 @@ UNUSUAL_DEV(  0x04b0, 0x040f, 0x0100, 0x0200,
 		US_FL_FIX_CAPACITY),
 
 /* Reported by Emil Larsson <emil@swip.net> */
-UNUSUAL_DEV(  0x04b0, 0x0411, 0x0100, 0x0110,
+UNUSUAL_DEV(  0x04b0, 0x0411, 0x0100, 0x0111,
 		"NIKON",
 		"NIKON DSC D80",
 		US_SC_DEVICE, US_PR_DEVICE, NULL,
 		US_FL_FIX_CAPACITY),
 
 /* Reported by Ortwin Glueck <odi@odi.ch> */
-UNUSUAL_DEV(  0x04b0, 0x0413, 0x0110, 0x0110,
+UNUSUAL_DEV(  0x04b0, 0x0413, 0x0110, 0x0111,
 		"NIKON",
 		"NIKON DSC D40",
 		US_SC_DEVICE, US_PR_DEVICE, NULL,
@@ -1185,6 +1192,13 @@ UNUSUAL_DEV(  0x07c4, 0xa400, 0x0000, 0xffff,
 		US_SC_DEVICE, US_PR_DEVICE, NULL,
 		US_FL_FIX_INQUIRY ),
 
+/* Reported by Rauch Wolke <rauchwolke@gmx.net> */
+UNUSUAL_DEV(  0x07c4, 0xa4a5, 0x0000, 0xffff,
+		"Simple Tech/Datafab",
+		"CF+SM Reader",
+		US_SC_DEVICE, US_PR_DEVICE, NULL,
+		US_FL_IGNORE_RESIDUE ),
+
 /* Casio QV 2x00/3x00/4000/8000 digital still cameras are not conformant
  * to the USB storage specification in two ways:
  * - They tell us they are using transport protocol CBI. In reality they
@@ -1562,6 +1576,7 @@ UNUSUAL_DEV(  0x10d6, 0x2200, 0x0100, 0x0100,
 		US_SC_DEVICE, US_PR_DEVICE, NULL,
 		0),
 
+#ifdef CONFIG_USB_STORAGE_SIERRA
 /* Reported by Kevin Lloyd <linux@sierrawireless.com>
  * Entry is needed for the initializer function override,
  * which instructs the device to load as a modem
@@ -1570,8 +1585,9 @@ UNUSUAL_DEV(  0x10d6, 0x2200, 0x0100, 0x0100,
 UNUSUAL_DEV(  0x1199, 0x0fff, 0x0000, 0x9999,
 		"Sierra Wireless",
 		"USB MMC Storage",
-		US_SC_DEVICE, US_PR_DEVICE, NULL,
-		US_FL_IGNORE_DEVICE),
+		US_SC_DEVICE, US_PR_DEVICE, sierra_ms_init,
+		0),
+#endif
 
 /* Reported by Jaco Kroon <jaco@kroon.co.za>
  * The usb-storage module found on the Digitech GNX4 (and supposedly other
@@ -1743,6 +1759,15 @@ UNUSUAL_DEV(  0x22b8, 0x4810, 0x0001, 0x0002,
 		US_FL_FIX_CAPACITY),
 
 /*
+ * Patch by Jost Diederichs <jost@qdusa.com>
+ */
+UNUSUAL_DEV(0x22b8, 0x6410, 0x0001, 0x9999,
+		"Motorola Inc.",
+		"Motorola Phone (RAZRV3xx)",
+		US_SC_DEVICE, US_PR_DEVICE, NULL,
+		US_FL_FIX_CAPACITY),
+
+/*
  * Patch by Constantin Baranov <const@tltsu.ru>
  * Report by Andreas Koenecke.
  * Motorola ROKR Z6.
@@ -1767,6 +1792,13 @@ UNUSUAL_DEV(  0x2770, 0x915d, 0x0010, 0x0010,
 		US_SC_DEVICE, US_PR_DEVICE, NULL,
 		US_FL_FIX_CAPACITY ),
 
+/* Reported by Andrey Rahmatullin <wrar@altlinux.org> */
+UNUSUAL_DEV(  0x4102, 0x1020, 0x0100,  0x0100,
+		"iRiver",
+		"MP3 T10",
+		US_SC_DEVICE, US_PR_DEVICE, NULL,
+		US_FL_IGNORE_RESIDUE ),
+
 /*
  * David Härdeman <david@2gen.com>
  * The key makes the SCSI stack print confusing (but harmless) messages
diff --git a/drivers/usb/storage/usb.c b/drivers/usb/storage/usb.c
index bfea851be985..73679aa506de 100644
--- a/drivers/usb/storage/usb.c
+++ b/drivers/usb/storage/usb.c
@@ -102,6 +102,9 @@
 #ifdef CONFIG_USB_STORAGE_CYPRESS_ATACB
 #include "cypress_atacb.h"
 #endif
+#ifdef CONFIG_USB_STORAGE_SIERRA
+#include "sierra_ms.h"
+#endif
 
 /* Some informational data */
 MODULE_AUTHOR("Matthew Dharm <mdharm-usb@one-eyed-alien.net>");
diff --git a/drivers/video/Makefile b/drivers/video/Makefile
index 0ebc1bfd2514..a6b55297a7fb 100644
--- a/drivers/video/Makefile
+++ b/drivers/video/Makefile
@@ -118,7 +118,6 @@ obj-$(CONFIG_FB_PS3)		  += ps3fb.o
 obj-$(CONFIG_FB_SM501)            += sm501fb.o
 obj-$(CONFIG_FB_XILINX)           += xilinxfb.o
 obj-$(CONFIG_FB_SH_MOBILE_LCDC)	  += sh_mobile_lcdcfb.o
-obj-$(CONFIG_FB_SH7343VOU)	  += sh7343_voufb.o
 obj-$(CONFIG_FB_OMAP)             += omap/
 obj-$(CONFIG_XEN_FBDEV_FRONTEND)  += xen-fbfront.o
 obj-$(CONFIG_FB_CARMINE)          += carminefb.o
diff --git a/drivers/video/acornfb.c b/drivers/video/acornfb.c
index 017233d0c481..61c3d3f40fd1 100644
--- a/drivers/video/acornfb.c
+++ b/drivers/video/acornfb.c
@@ -29,7 +29,7 @@
 #include <linux/platform_device.h>
 #include <linux/dma-mapping.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 #include <asm/irq.h>
 #include <asm/mach-types.h>
@@ -339,7 +339,7 @@ acornfb_setcolreg(u_int regno, u_int red, u_int green, u_int blue,
 #endif
 
 #ifdef HAS_VIDC20
-#include <asm/arch/acornfb.h>
+#include <mach/acornfb.h>
 
 #define MAX_SIZE	2*1024*1024
 
diff --git a/drivers/video/am200epd.c b/drivers/video/am200epd.c
index 51e26c1f5e8b..0c35b8b0160e 100644
--- a/drivers/video/am200epd.c
+++ b/drivers/video/am200epd.c
@@ -33,7 +33,7 @@
 
 #include <video/metronomefb.h>
 
-#include <asm/arch/pxa-regs.h>
+#include <mach/pxa-regs.h>
 
 /* register offsets for gpio control */
 #define LED_GPIO_PIN 51
@@ -221,7 +221,7 @@ static int am200_setup_irq(struct fb_info *info)
 		return retval;
 	}
 
-	return set_irq_type(IRQ_GPIO(RDY_GPIO_PIN), IRQT_FALLING);
+	return set_irq_type(IRQ_GPIO(RDY_GPIO_PIN), IRQ_TYPE_EDGE_FALLING);
 }
 
 static void am200_set_rst(struct metronomefb_par *par, int state)
diff --git a/drivers/video/arkfb.c b/drivers/video/arkfb.c
index 5001bd4ef466..314d18694b6a 100644
--- a/drivers/video/arkfb.c
+++ b/drivers/video/arkfb.c
@@ -11,7 +11,6 @@
  *  Code is based on s3fb
  */
 
-#include <linux/version.h>
 #include <linux/module.h>
 #include <linux/kernel.h>
 #include <linux/errno.h>
@@ -958,20 +957,20 @@ static int __devinit ark_pci_probe(struct pci_dev *dev, const struct pci_device_
 	/* Prepare PCI device */
 	rc = pci_enable_device(dev);
 	if (rc < 0) {
-		dev_err(info->dev, "cannot enable PCI device\n");
+		dev_err(info->device, "cannot enable PCI device\n");
 		goto err_enable_device;
 	}
 
 	rc = pci_request_regions(dev, "arkfb");
 	if (rc < 0) {
-		dev_err(info->dev, "cannot reserve framebuffer region\n");
+		dev_err(info->device, "cannot reserve framebuffer region\n");
 		goto err_request_regions;
 	}
 
 	par->dac = ics5342_init(ark_dac_read_regs, ark_dac_write_regs, info);
 	if (! par->dac) {
 		rc = -ENOMEM;
-		dev_err(info->dev, "RAMDAC initialization failed\n");
+		dev_err(info->device, "RAMDAC initialization failed\n");
 		goto err_dac;
 	}
 
@@ -982,7 +981,7 @@ static int __devinit ark_pci_probe(struct pci_dev *dev, const struct pci_device_
 	info->screen_base = pci_iomap(dev, 0, 0);
 	if (! info->screen_base) {
 		rc = -ENOMEM;
-		dev_err(info->dev, "iomap for framebuffer failed\n");
+		dev_err(info->device, "iomap for framebuffer failed\n");
 		goto err_iomap;
 	}
 
@@ -1004,19 +1003,19 @@ static int __devinit ark_pci_probe(struct pci_dev *dev, const struct pci_device_
 	rc = fb_find_mode(&(info->var), info, mode_option, NULL, 0, NULL, 8);
 	if (! ((rc == 1) || (rc == 2))) {
 		rc = -EINVAL;
-		dev_err(info->dev, "mode %s not found\n", mode_option);
+		dev_err(info->device, "mode %s not found\n", mode_option);
 		goto err_find_mode;
 	}
 
 	rc = fb_alloc_cmap(&info->cmap, 256, 0);
 	if (rc < 0) {
-		dev_err(info->dev, "cannot allocate colormap\n");
+		dev_err(info->device, "cannot allocate colormap\n");
 		goto err_alloc_cmap;
 	}
 
 	rc = register_framebuffer(info);
 	if (rc < 0) {
-		dev_err(info->dev, "cannot register framebugger\n");
+		dev_err(info->device, "cannot register framebugger\n");
 		goto err_reg_fb;
 	}
 
@@ -1090,7 +1089,7 @@ static int ark_pci_suspend (struct pci_dev* dev, pm_message_t state)
 	struct fb_info *info = pci_get_drvdata(dev);
 	struct arkfb_info *par = info->par;
 
-	dev_info(info->dev, "suspend\n");
+	dev_info(info->device, "suspend\n");
 
 	acquire_console_sem();
 	mutex_lock(&(par->open_lock));
@@ -1121,16 +1120,13 @@ static int ark_pci_resume (struct pci_dev* dev)
 	struct fb_info *info = pci_get_drvdata(dev);
 	struct arkfb_info *par = info->par;
 
-	dev_info(info->dev, "resume\n");
+	dev_info(info->device, "resume\n");
 
 	acquire_console_sem();
 	mutex_lock(&(par->open_lock));
 
-	if (par->ref_count == 0) {
-		mutex_unlock(&(par->open_lock));
-		release_console_sem();
-		return 0;
-	}
+	if (par->ref_count == 0)
+		goto fail;
 
 	pci_set_power_state(dev, PCI_D0);
 	pci_restore_state(dev);
@@ -1143,8 +1139,8 @@ static int ark_pci_resume (struct pci_dev* dev)
 	arkfb_set_par(info);
 	fb_set_suspend(info, 0);
 
-	mutex_unlock(&(par->open_lock));
 fail:
+	mutex_unlock(&(par->open_lock));
 	release_console_sem();
 	return 0;
 }
diff --git a/drivers/video/atmel_lcdfb.c b/drivers/video/atmel_lcdfb.c
index 5b3a15dffb5f..9c5925927ece 100644
--- a/drivers/video/atmel_lcdfb.c
+++ b/drivers/video/atmel_lcdfb.c
@@ -18,9 +18,9 @@
 #include <linux/delay.h>
 #include <linux/backlight.h>
 
-#include <asm/arch/board.h>
-#include <asm/arch/cpu.h>
-#include <asm/arch/gpio.h>
+#include <mach/board.h>
+#include <mach/cpu.h>
+#include <mach/gpio.h>
 
 #include <video/atmel_lcdc.h>
 
@@ -39,7 +39,9 @@
 #endif
 
 #if defined(CONFIG_ARCH_AT91)
-#define	ATMEL_LCDFB_FBINFO_DEFAULT	FBINFO_DEFAULT
+#define	ATMEL_LCDFB_FBINFO_DEFAULT	(FBINFO_DEFAULT \
+					 | FBINFO_PARTIAL_PAN_OK \
+					 | FBINFO_HWACCEL_YPAN)
 
 static inline void atmel_lcdfb_update_dma2d(struct atmel_lcdfb_info *sinfo,
 					struct fb_var_screeninfo *var)
@@ -177,7 +179,7 @@ static struct fb_fix_screeninfo atmel_lcdfb_fix __initdata = {
 	.type		= FB_TYPE_PACKED_PIXELS,
 	.visual		= FB_VISUAL_TRUECOLOR,
 	.xpanstep	= 0,
-	.ypanstep	= 0,
+	.ypanstep	= 1,
 	.ywrapstep	= 0,
 	.accel		= FB_ACCEL_NONE,
 };
@@ -240,9 +242,11 @@ static int atmel_lcdfb_alloc_video_memory(struct atmel_lcdfb_info *sinfo)
 {
 	struct fb_info *info = sinfo->info;
 	struct fb_var_screeninfo *var = &info->var;
+	unsigned int smem_len;
 
-	info->fix.smem_len = (var->xres_virtual * var->yres_virtual
-			    * ((var->bits_per_pixel + 7) / 8));
+	smem_len = (var->xres_virtual * var->yres_virtual
+		    * ((var->bits_per_pixel + 7) / 8));
+	info->fix.smem_len = max(smem_len, sinfo->smem_len);
 
 	info->screen_base = dma_alloc_writecombine(info->device, info->fix.smem_len,
 					(dma_addr_t *)&info->fix.smem_start, GFP_KERNEL);
@@ -794,6 +798,7 @@ static int __init atmel_lcdfb_probe(struct platform_device *pdev)
 		sinfo->default_monspecs = pdata_sinfo->default_monspecs;
 		sinfo->atmel_lcdfb_power_control = pdata_sinfo->atmel_lcdfb_power_control;
 		sinfo->guard_time = pdata_sinfo->guard_time;
+		sinfo->smem_len = pdata_sinfo->smem_len;
 		sinfo->lcdcon_is_backlight = pdata_sinfo->lcdcon_is_backlight;
 		sinfo->lcd_wiring_mode = pdata_sinfo->lcd_wiring_mode;
 	} else {
diff --git a/drivers/video/aty/atyfb_base.c b/drivers/video/aty/atyfb_base.c
index 620ba8120368..cc6b470073da 100644
--- a/drivers/video/aty/atyfb_base.c
+++ b/drivers/video/aty/atyfb_base.c
@@ -244,7 +244,7 @@ static int atyfb_sync(struct fb_info *info);
      */
 
 static int aty_init(struct fb_info *info);
-static void aty_resume_chip(struct fb_info *info);
+
 #ifdef CONFIG_ATARI
 static int store_video_par(char *videopar, unsigned char m64_num);
 #endif
@@ -2023,6 +2023,20 @@ static int atyfb_pci_suspend(struct pci_dev *pdev, pm_message_t state)
 	return 0;
 }
 
+static void aty_resume_chip(struct fb_info *info)
+{
+	struct atyfb_par *par = info->par;
+
+	aty_st_le32(MEM_CNTL, par->mem_cntl, par);
+
+	if (par->pll_ops->resume_pll)
+		par->pll_ops->resume_pll(info, &par->pll);
+
+	if (par->aux_start)
+		aty_st_le32(BUS_CNTL,
+			aty_ld_le32(BUS_CNTL, par) | BUS_APER_REG_DIS, par);
+}
+
 static int atyfb_pci_resume(struct pci_dev *pdev)
 {
 	struct fb_info *info = pci_get_drvdata(pdev);
@@ -2659,19 +2673,6 @@ aty_init_exit:
 	return ret;
 }
 
-static void aty_resume_chip(struct fb_info *info)
-{
-	struct atyfb_par *par = info->par;
-
-	aty_st_le32(MEM_CNTL, par->mem_cntl, par);
-
-	if (par->pll_ops->resume_pll)
-		par->pll_ops->resume_pll(info, &par->pll);
-
-	if (par->aux_start)
-		aty_st_le32(BUS_CNTL, aty_ld_le32(BUS_CNTL, par) | BUS_APER_REG_DIS, par);
-}
-
 #ifdef CONFIG_ATARI
 static int __devinit store_video_par(char *video_str, unsigned char m64_num)
 {
diff --git a/drivers/video/aty/radeon_accel.c b/drivers/video/aty/radeon_accel.c
index 3ca27cb13caa..aa95f8350242 100644
--- a/drivers/video/aty/radeon_accel.c
+++ b/drivers/video/aty/radeon_accel.c
@@ -55,6 +55,10 @@ static void radeonfb_prim_fillrect(struct radeonfb_info *rinfo,
 	OUTREG(DP_WRITE_MSK, 0xffffffff);
 	OUTREG(DP_CNTL, (DST_X_LEFT_TO_RIGHT | DST_Y_TOP_TO_BOTTOM));
 
+	radeon_fifo_wait(2);
+	OUTREG(DSTCACHE_CTLSTAT, RB2D_DC_FLUSH_ALL);
+	OUTREG(WAIT_UNTIL, (WAIT_2D_IDLECLEAN | WAIT_DMA_GUI_IDLE));
+
 	radeon_fifo_wait(2);  
 	OUTREG(DST_Y_X, (region->dy << 16) | region->dx);
 	OUTREG(DST_WIDTH_HEIGHT, (region->width << 16) | region->height);
@@ -116,6 +120,10 @@ static void radeonfb_prim_copyarea(struct radeonfb_info *rinfo,
 	OUTREG(DP_CNTL, (xdir>=0 ? DST_X_LEFT_TO_RIGHT : 0)
 			| (ydir>=0 ? DST_Y_TOP_TO_BOTTOM : 0));
 
+	radeon_fifo_wait(2);
+	OUTREG(DSTCACHE_CTLSTAT, RB2D_DC_FLUSH_ALL);
+	OUTREG(WAIT_UNTIL, (WAIT_2D_IDLECLEAN | WAIT_DMA_GUI_IDLE));
+
 	radeon_fifo_wait(3);
 	OUTREG(SRC_Y_X, (sy << 16) | sx);
 	OUTREG(DST_Y_X, (dy << 16) | dx);
@@ -241,8 +249,8 @@ void radeonfb_engine_reset(struct radeonfb_info *rinfo)
 	INREG(HOST_PATH_CNTL);
 	OUTREG(HOST_PATH_CNTL, host_path_cntl);
 
-	if (rinfo->family != CHIP_FAMILY_R300 ||
-	    rinfo->family != CHIP_FAMILY_R350 ||
+	if (rinfo->family != CHIP_FAMILY_R300 &&
+	    rinfo->family != CHIP_FAMILY_R350 &&
 	    rinfo->family != CHIP_FAMILY_RV350)
 		OUTREG(RBBM_SOFT_RESET, rbbm_soft_reset);
 
diff --git a/drivers/video/aty/radeon_i2c.c b/drivers/video/aty/radeon_i2c.c
index f9e7c29ad9bf..8c8fa35f1b7c 100644
--- a/drivers/video/aty/radeon_i2c.c
+++ b/drivers/video/aty/radeon_i2c.c
@@ -69,7 +69,8 @@ static int radeon_setup_i2c_bus(struct radeon_i2c_chan *chan, const char *name)
 {
 	int rc;
 
-	strcpy(chan->adapter.name, name);
+	snprintf(chan->adapter.name, sizeof(chan->adapter.name),
+		 "radeonfb %s", name);
 	chan->adapter.owner		= THIS_MODULE;
 	chan->adapter.id		= I2C_HW_B_RADEON;
 	chan->adapter.algo_data		= &chan->algo;
diff --git a/drivers/video/backlight/hp680_bl.c b/drivers/video/backlight/hp680_bl.c
index fbea2bd129c7..6fa0b9d5559a 100644
--- a/drivers/video/backlight/hp680_bl.c
+++ b/drivers/video/backlight/hp680_bl.c
@@ -18,7 +18,7 @@
 #include <linux/fb.h>
 #include <linux/backlight.h>
 
-#include <asm/cpu/dac.h>
+#include <cpu/dac.h>
 #include <asm/hp6xx.h>
 #include <asm/hd64461.h>
 
diff --git a/drivers/video/backlight/omap1_bl.c b/drivers/video/backlight/omap1_bl.c
index 891875d53a49..cbad67e89826 100644
--- a/drivers/video/backlight/omap1_bl.c
+++ b/drivers/video/backlight/omap1_bl.c
@@ -25,9 +25,9 @@
 #include <linux/fb.h>
 #include <linux/backlight.h>
 
-#include <asm/arch/hardware.h>
-#include <asm/arch/board.h>
-#include <asm/arch/mux.h>
+#include <mach/hardware.h>
+#include <mach/board.h>
+#include <mach/mux.h>
 
 #define OMAPBL_MAX_INTENSITY		0xff
 
diff --git a/drivers/video/backlight/platform_lcd.c b/drivers/video/backlight/platform_lcd.c
index 72d44dbfce82..738694d23889 100644
--- a/drivers/video/backlight/platform_lcd.c
+++ b/drivers/video/backlight/platform_lcd.c
@@ -92,7 +92,7 @@ static int __devinit platform_lcd_probe(struct platform_device *pdev)
 
 	plcd->us = dev;
 	plcd->pdata = pdata;
-	plcd->lcd = lcd_device_register("platform-lcd", dev,
+	plcd->lcd = lcd_device_register(dev_name(dev), dev,
 					plcd, &platform_lcd_ops);
 	if (IS_ERR(plcd->lcd)) {
 		dev_err(dev, "cannot register lcd device\n");
@@ -101,6 +101,8 @@ static int __devinit platform_lcd_probe(struct platform_device *pdev)
 	}
 
 	platform_set_drvdata(pdev, plcd);
+	platform_lcd_set_power(plcd->lcd, FB_BLANK_NORMAL);
+
 	return 0;
 
  err_mem:
diff --git a/drivers/video/backlight/pwm_bl.c b/drivers/video/backlight/pwm_bl.c
index 6338d0e2fe07..ea07258565f0 100644
--- a/drivers/video/backlight/pwm_bl.c
+++ b/drivers/video/backlight/pwm_bl.c
@@ -68,8 +68,10 @@ static int pwm_backlight_probe(struct platform_device *pdev)
 	struct pwm_bl_data *pb;
 	int ret;
 
-	if (!data)
+	if (!data) {
+		dev_err(&pdev->dev, "failed to find platform data\n");
 		return -EINVAL;
+	}
 
 	if (data->init) {
 		ret = data->init(&pdev->dev);
@@ -79,6 +81,7 @@ static int pwm_backlight_probe(struct platform_device *pdev)
 
 	pb = kzalloc(sizeof(*pb), GFP_KERNEL);
 	if (!pb) {
+		dev_err(&pdev->dev, "no memory for state\n");
 		ret = -ENOMEM;
 		goto err_alloc;
 	}
@@ -91,7 +94,8 @@ static int pwm_backlight_probe(struct platform_device *pdev)
 		dev_err(&pdev->dev, "unable to request PWM for backlight\n");
 		ret = PTR_ERR(pb->pwm);
 		goto err_pwm;
-	}
+	} else
+		dev_dbg(&pdev->dev, "got pwm for backlight\n");
 
 	bl = backlight_device_register(pdev->name, &pdev->dev,
 			pb, &pwm_backlight_ops);
@@ -183,3 +187,5 @@ module_exit(pwm_backlight_exit);
 
 MODULE_DESCRIPTION("PWM based Backlight Driver");
 MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:pwm-backlight");
+
diff --git a/drivers/video/bf54x-lq043fb.c b/drivers/video/bf54x-lq043fb.c
index 940467aed13f..7644ed249564 100644
--- a/drivers/video/bf54x-lq043fb.c
+++ b/drivers/video/bf54x-lq043fb.c
@@ -58,7 +58,7 @@
 #include <asm/gpio.h>
 #include <asm/portmux.h>
 
-#include <asm/mach/bf54x-lq043.h>
+#include <mach/bf54x-lq043.h>
 
 #define NO_BL_SUPPORT
 
@@ -733,7 +733,6 @@ static int bfin_bf54x_remove(struct platform_device *pdev)
 static int bfin_bf54x_suspend(struct platform_device *pdev, pm_message_t state)
 {
 	struct fb_info *fbinfo = platform_get_drvdata(pdev);
-	struct bfin_bf54xfb_info *info = fbinfo->par;
 
 	bfin_write_EPPI0_CONTROL(bfin_read_EPPI0_CONTROL() & ~EPPI_EN);
 	disable_dma(CH_EPPI0);
@@ -747,8 +746,18 @@ static int bfin_bf54x_resume(struct platform_device *pdev)
 	struct fb_info *fbinfo = platform_get_drvdata(pdev);
 	struct bfin_bf54xfb_info *info = fbinfo->par;
 
-	enable_dma(CH_EPPI0);
-	bfin_write_EPPI0_CONTROL(bfin_read_EPPI0_CONTROL() | EPPI_EN);
+	if (info->lq043_open_cnt) {
+
+		bfin_write_EPPI0_CONTROL(0);
+		SSYNC();
+
+		config_dma(info);
+		config_ppi(info);
+
+		/* start dma */
+		enable_dma(CH_EPPI0);
+		bfin_write_EPPI0_CONTROL(bfin_read_EPPI0_CONTROL() | EPPI_EN);
+	}
 
 	return 0;
 }
diff --git a/drivers/video/cirrusfb.c b/drivers/video/cirrusfb.c
index c14b2435d23e..e729fb279645 100644
--- a/drivers/video/cirrusfb.c
+++ b/drivers/video/cirrusfb.c
@@ -628,27 +628,18 @@ static long cirrusfb_get_mclk(long freq, int bpp, long *div)
 static int cirrusfb_check_var(struct fb_var_screeninfo *var,
 			      struct fb_info *info)
 {
-	int nom, den;		/* translyting from pixels->bytes */
-	int yres, i;
-	static struct { int xres, yres; } modes[] =
-	{ { 1600, 1280 },
-	  { 1280, 1024 },
-	  { 1024, 768 },
-	  { 800, 600 },
-	  { 640, 480 },
-	  { -1, -1 } };
+	int yres;
+	/* memory size in pixels */
+	unsigned pixels = info->screen_size * 8 / var->bits_per_pixel;
 
 	switch (var->bits_per_pixel) {
 	case 1:
-		nom = 4;
-		den = 8;
+		pixels /= 4;
 		break;		/* 8 pixel per byte, only 1/4th of mem usable */
 	case 8:
 	case 16:
 	case 24:
 	case 32:
-		nom = var->bits_per_pixel / 8;
-		den = 1;
 		break;		/* 1 pixel == 1 byte */
 	default:
 		printk(KERN_ERR "cirrusfb: mode %dx%dx%d rejected..."
@@ -658,43 +649,29 @@ static int cirrusfb_check_var(struct fb_var_screeninfo *var,
 		return -EINVAL;
 	}
 
-	if (var->xres * nom / den * var->yres > info->screen_size) {
-		printk(KERN_ERR "cirrusfb: mode %dx%dx%d rejected..."
-			"resolution too high to fit into video memory!\n",
-			var->xres, var->yres, var->bits_per_pixel);
-		DPRINTK("EXIT - EINVAL error\n");
-		return -EINVAL;
-	}
-
+	if (var->xres_virtual < var->xres)
+		var->xres_virtual = var->xres;
 	/* use highest possible virtual resolution */
-	if (var->xres_virtual == -1 &&
-	    var->yres_virtual == -1) {
-		printk(KERN_INFO
-		     "cirrusfb: using maximum available virtual resolution\n");
-		for (i = 0; modes[i].xres != -1; i++) {
-			int size = modes[i].xres * nom / den * modes[i].yres;
-			if (size < info->screen_size / 2)
-				break;
-		}
-		if (modes[i].xres == -1) {
-			printk(KERN_ERR "cirrusfb: could not find a virtual "
-				"resolution that fits into video memory!!\n");
-			DPRINTK("EXIT - EINVAL error\n");
-			return -EINVAL;
-		}
-		var->xres_virtual = modes[i].xres;
-		var->yres_virtual = modes[i].yres;
+	if (var->yres_virtual == -1) {
+		var->yres_virtual = pixels / var->xres_virtual;
 
 		printk(KERN_INFO "cirrusfb: virtual resolution set to "
 			"maximum of %dx%d\n", var->xres_virtual,
 			var->yres_virtual);
 	}
-
-	if (var->xres_virtual < var->xres)
-		var->xres_virtual = var->xres;
 	if (var->yres_virtual < var->yres)
 		var->yres_virtual = var->yres;
 
+	if (var->xres_virtual * var->yres_virtual > pixels) {
+		printk(KERN_ERR "cirrusfb: mode %dx%dx%d rejected... "
+		      "virtual resolution too high to fit into video memory!\n",
+			var->xres_virtual, var->yres_virtual,
+			var->bits_per_pixel);
+		DPRINTK("EXIT - EINVAL error\n");
+		return -EINVAL;
+	}
+
+
 	if (var->xoffset < 0)
 		var->xoffset = 0;
 	if (var->yoffset < 0)
diff --git a/drivers/video/clps711xfb.c b/drivers/video/clps711xfb.c
index 9f8a389dc7ae..16f5db471ab5 100644
--- a/drivers/video/clps711xfb.c
+++ b/drivers/video/clps711xfb.c
@@ -27,12 +27,12 @@
 #include <linux/proc_fs.h>
 #include <linux/delay.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <linux/uaccess.h>
 
 #include <asm/hardware/clps7111.h>
-#include <asm/arch/syspld.h>
+#include <mach/syspld.h>
 
 struct fb_info	*cfb;
 
diff --git a/drivers/video/console/.gitignore b/drivers/video/console/.gitignore
new file mode 100644
index 000000000000..0c258b45439c
--- /dev/null
+++ b/drivers/video/console/.gitignore
@@ -0,0 +1,2 @@
+# conmakehash generated file
+promcon_tbl.c
diff --git a/drivers/video/console/fbcon.c b/drivers/video/console/fbcon.c
index 3ccfa76d9b2a..c6299e8a041d 100644
--- a/drivers/video/console/fbcon.c
+++ b/drivers/video/console/fbcon.c
@@ -1311,6 +1311,9 @@ static void fbcon_clear(struct vc_data *vc, int sy, int sx, int height,
 	if (!height || !width)
 		return;
 
+	if (sy < vc->vc_top && vc->vc_top == logo_lines)
+		vc->vc_top = 0;
+
 	/* Split blits that cross physical y_wrap boundary */
 
 	y_break = p->vrows - p->yscroll;
@@ -2515,7 +2518,7 @@ static int fbcon_do_set_font(struct vc_data *vc, int w, int h,
 			c = vc->vc_video_erase_char;
 			vc->vc_video_erase_char =
 			    ((c & 0xfe00) >> 1) | (c & 0xff);
-			c = vc->vc_def_color;
+			c = vc->vc_scrl_erase_char;
 			vc->vc_scrl_erase_char =
 			    ((c & 0xFE00) >> 1) | (c & 0xFF);
 			vc->vc_attr >>= 1;
@@ -2548,7 +2551,7 @@ static int fbcon_do_set_font(struct vc_data *vc, int w, int h,
 			if (vc->vc_can_do_color) {
 				vc->vc_video_erase_char =
 				    ((c & 0xff00) << 1) | (c & 0xff);
-				c = vc->vc_def_color;
+				c = vc->vc_scrl_erase_char;
 				vc->vc_scrl_erase_char =
 				    ((c & 0xFF00) << 1) | (c & 0xFF);
 				vc->vc_attr <<= 1;
diff --git a/drivers/video/console/fbcon.h b/drivers/video/console/fbcon.h
index de1b1365279b..a6e38e9ea73f 100644
--- a/drivers/video/console/fbcon.h
+++ b/drivers/video/console/fbcon.h
@@ -92,7 +92,7 @@ struct fbcon_ops {
 #define attr_fgcol(fgshift,s)    \
 	(((s) >> (fgshift)) & 0x0f)
 #define attr_bgcol(bgshift,s)    \
-	(((s) >> (bgshift)) & 0x07)
+	(((s) >> (bgshift)) & 0x0f)
 
 /* Monochrome */
 #define attr_bold(s) \
diff --git a/drivers/video/console/sticon.c b/drivers/video/console/sticon.c
index a11cc2fdd4cd..4055dbdd1b42 100644
--- a/drivers/video/console/sticon.c
+++ b/drivers/video/console/sticon.c
@@ -370,7 +370,7 @@ static const struct consw sti_con = {
 
 
 
-int __init sticonsole_init(void)
+static int __init sticonsole_init(void)
 {
     /* already initialized ? */
     if (sticon_sti)
diff --git a/drivers/video/console/sticore.c b/drivers/video/console/sticore.c
index e9ab657f0bb7..ef7870f5ea08 100644
--- a/drivers/video/console/sticore.c
+++ b/drivers/video/console/sticore.c
@@ -24,12 +24,13 @@
 #include <asm/hardware.h>
 #include <asm/parisc-device.h>
 #include <asm/cacheflush.h>
+#include <asm/grfioctl.h>
 
 #include "../sticore.h"
 
 #define STI_DRIVERVERSION "Version 0.9a"
 
-struct sti_struct *default_sti __read_mostly;
+static struct sti_struct *default_sti __read_mostly;
 
 /* number of STI ROMS found and their ptrs to each struct */
 static int num_sti_roms __read_mostly;
@@ -68,8 +69,7 @@ static const struct sti_init_flags default_init_flags = {
 	.init_cmap_tx = 1,
 };
 
-int
-sti_init_graph(struct sti_struct *sti) 
+static int sti_init_graph(struct sti_struct *sti)
 {
 	struct sti_init_inptr_ext inptr_ext = { 0, };
 	struct sti_init_inptr inptr = {
@@ -100,8 +100,7 @@ static const struct sti_conf_flags default_conf_flags = {
 	.wait	= STI_WAIT,
 };
 
-void
-sti_inq_conf(struct sti_struct *sti)
+static void sti_inq_conf(struct sti_struct *sti)
 {
 	struct sti_conf_inptr inptr = { 0, };
 	unsigned long flags;
@@ -237,8 +236,8 @@ static void sti_flush(unsigned long start, unsigned long end)
 	flush_icache_range(start, end);
 }
 
-void __devinit
-sti_rom_copy(unsigned long base, unsigned long count, void *dest)
+static void __devinit sti_rom_copy(unsigned long base, unsigned long count,
+				   void *dest)
 {
 	unsigned long dest_start = (unsigned long) dest;
 
@@ -478,8 +477,8 @@ sti_init_glob_cfg(struct sti_struct *sti,
 }
 
 #ifdef CONFIG_FB
-struct sti_cooked_font * __devinit
-sti_select_fbfont(struct sti_cooked_rom *cooked_rom, const char *fbfont_name)
+static struct sti_cooked_font __devinit
+*sti_select_fbfont(struct sti_cooked_rom *cooked_rom, const char *fbfont_name)
 {
 	const struct font_desc *fbfont;
 	unsigned int size, bpc;
@@ -534,16 +533,16 @@ sti_select_fbfont(struct sti_cooked_rom *cooked_rom, const char *fbfont_name)
 	return cooked_font;
 }
 #else
-struct sti_cooked_font * __devinit
-sti_select_fbfont(struct sti_cooked_rom *cooked_rom, const char *fbfont_name)
+static struct sti_cooked_font __devinit
+*sti_select_fbfont(struct sti_cooked_rom *cooked_rom, const char *fbfont_name)
 {
 	return NULL;
 }
 #endif
 
-struct sti_cooked_font * __devinit
-sti_select_font(struct sti_cooked_rom *rom,
-	    int (*search_font_fnc) (struct sti_cooked_rom *,int,int) )
+static struct sti_cooked_font __devinit
+*sti_select_font(struct sti_cooked_rom *rom,
+		 int (*search_font_fnc)(struct sti_cooked_rom *, int, int))
 {
 	struct sti_cooked_font *font;
 	int i;
@@ -707,8 +706,7 @@ sti_get_bmode_rom (unsigned long address)
 	return raw;
 }
 
-struct sti_rom * __devinit
-sti_get_wmode_rom (unsigned long address)
+static struct sti_rom __devinit *sti_get_wmode_rom(unsigned long address)
 {
 	struct sti_rom *raw;
 	unsigned long size;
@@ -723,11 +721,12 @@ sti_get_wmode_rom (unsigned long address)
 	return raw;
 }
 
-int __devinit
-sti_read_rom(int wordmode, struct sti_struct *sti, unsigned long address)
+static int __devinit sti_read_rom(int wordmode, struct sti_struct *sti,
+				  unsigned long address)
 {
 	struct sti_cooked_rom *cooked;
 	struct sti_rom *raw = NULL;
+	unsigned long revno;
 
 	cooked = kmalloc(sizeof *cooked, GFP_KERNEL);
 	if (!cooked)
@@ -770,9 +769,35 @@ sti_read_rom(int wordmode, struct sti_struct *sti, unsigned long address)
 	sti->graphics_id[1] = raw->graphics_id[1];
 	
 	sti_dump_rom(raw);
-	
+
+	/* check if the ROM routines in this card are compatible */
+	if (wordmode || sti->graphics_id[1] != 0x09A02587)
+		goto ok;
+
+	revno = (raw->revno[0] << 8) | raw->revno[1];
+
+	switch (sti->graphics_id[0]) {
+	case S9000_ID_HCRX:
+		/* HyperA or HyperB ? */
+		if (revno == 0x8408 || revno == 0x840b)
+			goto msg_not_supported;
+		break;
+	case CRT_ID_THUNDER:
+		if (revno == 0x8509)
+			goto msg_not_supported;
+		break;
+	case CRT_ID_THUNDER2:
+		if (revno == 0x850c)
+			goto msg_not_supported;
+	}
+ok:
 	return 1;
 
+msg_not_supported:
+	printk(KERN_ERR "Sorry, this GSC/STI card is not yet supported.\n");
+	printk(KERN_ERR "Please see http://parisc-linux.org/faq/"
+			"graphics-howto.html for more info.\n");
+	/* fall through */
 out_err:
 	kfree(raw);
 	kfree(cooked);
diff --git a/drivers/video/cyber2000fb.c b/drivers/video/cyber2000fb.c
index d0e4cb618269..41d62632dcdb 100644
--- a/drivers/video/cyber2000fb.c
+++ b/drivers/video/cyber2000fb.c
@@ -1425,7 +1425,7 @@ static void cyberpro_common_resume(struct cfb_info *cfb)
 
 #ifdef CONFIG_ARCH_SHARK
 
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 
 static int __devinit cyberpro_vl_probe(void)
 {
diff --git a/drivers/video/epson1355fb.c b/drivers/video/epson1355fb.c
index cc2810ef5de5..2735b79e52a1 100644
--- a/drivers/video/epson1355fb.c
+++ b/drivers/video/epson1355fb.c
@@ -71,7 +71,7 @@ struct epson1355_par {
 #if defined(CONFIG_ARM)
 
 # ifdef CONFIG_ARCH_CEIVA
-#  include <asm/arch/hardware.h>
+#  include <mach/hardware.h>
 #  define EPSON1355FB_BASE_PHYS	(CEIVA_PHYS_SED1355)
 # endif
 
diff --git a/drivers/video/fb_defio.c b/drivers/video/fb_defio.c
index 59df132cc375..4835bdc4e9f1 100644
--- a/drivers/video/fb_defio.c
+++ b/drivers/video/fb_defio.c
@@ -114,6 +114,17 @@ static struct vm_operations_struct fb_deferred_io_vm_ops = {
 	.page_mkwrite	= fb_deferred_io_mkwrite,
 };
 
+static int fb_deferred_io_set_page_dirty(struct page *page)
+{
+	if (!PageDirty(page))
+		SetPageDirty(page);
+	return 0;
+}
+
+static const struct address_space_operations fb_deferred_io_aops = {
+	.set_page_dirty = fb_deferred_io_set_page_dirty,
+};
+
 static int fb_deferred_io_mmap(struct fb_info *info, struct vm_area_struct *vma)
 {
 	vma->vm_ops = &fb_deferred_io_vm_ops;
@@ -163,6 +174,14 @@ void fb_deferred_io_init(struct fb_info *info)
 }
 EXPORT_SYMBOL_GPL(fb_deferred_io_init);
 
+void fb_deferred_io_open(struct fb_info *info,
+			 struct inode *inode,
+			 struct file *file)
+{
+	file->f_mapping->a_ops = &fb_deferred_io_aops;
+}
+EXPORT_SYMBOL_GPL(fb_deferred_io_open);
+
 void fb_deferred_io_cleanup(struct fb_info *info)
 {
 	void *screen_base = (void __force *) info->screen_base;
diff --git a/drivers/video/fbmem.c b/drivers/video/fbmem.c
index 5d84b3431098..98843c2ecf73 100644
--- a/drivers/video/fbmem.c
+++ b/drivers/video/fbmem.c
@@ -35,7 +35,6 @@
 #include <linux/device.h>
 #include <linux/efi.h>
 #include <linux/fb.h>
-#include <linux/major.h>
 
 #include <asm/fb.h>
 
@@ -1345,6 +1344,10 @@ fb_open(struct inode *inode, struct file *file)
 		if (res)
 			module_put(info->fbops->owner);
 	}
+#ifdef CONFIG_FB_DEFERRED_IO
+	if (info->fbdefio)
+		fb_deferred_io_open(info, inode, file);
+#endif
 out:
 	unlock_kernel();
 	return res;
diff --git a/drivers/video/fsl-diu-fb.c b/drivers/video/fsl-diu-fb.c
index 9cd36c223d33..fb51197d1c98 100644
--- a/drivers/video/fsl-diu-fb.c
+++ b/drivers/video/fsl-diu-fb.c
@@ -479,6 +479,10 @@ static void adjust_aoi_size_position(struct fb_var_screeninfo *var,
 	base_plane_width = machine_data->fsl_diu_info[0]->var.xres;
 	base_plane_height = machine_data->fsl_diu_info[0]->var.yres;
 
+	if (mfbi->x_aoi_d < 0)
+		mfbi->x_aoi_d = 0;
+	if (mfbi->y_aoi_d < 0)
+		mfbi->y_aoi_d = 0;
 	switch (index) {
 	case 0:
 		if (mfbi->x_aoi_d != 0)
@@ -778,6 +782,22 @@ static void unmap_video_memory(struct fb_info *info)
 }
 
 /*
+ * Using the fb_var_screeninfo in fb_info we set the aoi of this
+ * particular framebuffer. It is a light version of fsl_diu_set_par.
+ */
+static int fsl_diu_set_aoi(struct fb_info *info)
+{
+	struct fb_var_screeninfo *var = &info->var;
+	struct mfb_info *mfbi = info->par;
+	struct diu_ad *ad = mfbi->ad;
+
+	/* AOI should not be greater than display size */
+	ad->offset_xyi = cpu_to_le32((var->yoffset << 16) | var->xoffset);
+	ad->offset_xyd = cpu_to_le32((mfbi->y_aoi_d << 16) | mfbi->x_aoi_d);
+	return 0;
+}
+
+/*
  * Using the fb_var_screeninfo in fb_info we set the resolution of this
  * particular framebuffer. This function alters the fb_fix_screeninfo stored
  * in fb_info. It does not alter var in fb_info since we are using that
@@ -817,11 +837,11 @@ static int fsl_diu_set_par(struct fb_info *info)
 		diu_ops.get_pixel_format(var->bits_per_pixel,
 					 machine_data->monitor_port);
 	ad->addr    = cpu_to_le32(info->fix.smem_start);
-	ad->src_size_g_alpha = cpu_to_le32((var->yres << 12) |
-				var->xres) | mfbi->g_alpha;
-	/* fix me. AOI should not be greater than display size */
+	ad->src_size_g_alpha = cpu_to_le32((var->yres_virtual << 12) |
+				var->xres_virtual) | mfbi->g_alpha;
+	/* AOI should not be greater than display size */
 	ad->aoi_size 	= cpu_to_le32((var->yres << 16) | var->xres);
-	ad->offset_xyi = 0;
+	ad->offset_xyi = cpu_to_le32((var->yoffset << 16) | var->xoffset);
 	ad->offset_xyd = cpu_to_le32((mfbi->y_aoi_d << 16) | mfbi->x_aoi_d);
 
 	/* Disable chroma keying function */
@@ -921,6 +941,8 @@ static int fsl_diu_pan_display(struct fb_var_screeninfo *var,
 	else
 		info->var.vmode &= ~FB_VMODE_YWRAP;
 
+	fsl_diu_set_aoi(info);
+
 	return 0;
 }
 
@@ -989,7 +1011,7 @@ static int fsl_diu_ioctl(struct fb_info *info, unsigned int cmd,
 		pr_debug("set AOI display offset of index %d to (%d,%d)\n",
 				 mfbi->index, aoi_d.x_aoi_d, aoi_d.y_aoi_d);
 		fsl_diu_check_var(&info->var, info);
-		fsl_diu_set_par(info);
+		fsl_diu_set_aoi(info);
 		break;
 	case MFB_GET_AOID:
 		aoi_d.x_aoi_d = mfbi->x_aoi_d;
@@ -1649,8 +1671,10 @@ static int __init fsl_diu_init(void)
 	}
 
 	prop = of_get_property(np, "d-cache-size", NULL);
-	if (prop == NULL)
+	if (prop == NULL) {
+		of_node_put(np);
 		return -ENODEV;
+	}
 
 	/* Freescale PLRU requires 13/8 times the cache size to do a proper
 	   displacement flush
@@ -1659,8 +1683,10 @@ static int __init fsl_diu_init(void)
 	coherence_data_size /= 8;
 
 	prop = of_get_property(np, "d-cache-line-size", NULL);
-	if (prop == NULL)
+	if (prop == NULL) {
+		of_node_put(np);
 		return -ENODEV;
+	}
 	d_cache_line_size = *prop;
 
 	of_node_put(np);
diff --git a/drivers/video/gbefb.c b/drivers/video/gbefb.c
index 2e552d5bbb5d..f89c3cce1e0c 100644
--- a/drivers/video/gbefb.c
+++ b/drivers/video/gbefb.c
@@ -87,6 +87,8 @@ static int gbe_revision;
 static int ypan, ywrap;
 
 static uint32_t pseudo_palette[16];
+static uint32_t gbe_cmap[256];
+static int gbe_turned_on; /* 0 turned off, 1 turned on */
 
 static char *mode_option __initdata = NULL;
 
@@ -208,6 +210,8 @@ void gbe_turn_off(void)
 	int i;
 	unsigned int val, x, y, vpixen_off;
 
+	gbe_turned_on = 0;
+
 	/* check if pixel counter is on */
 	val = gbe->vt_xy;
 	if (GET_GBE_FIELD(VT_XY, FREEZE, val) == 1)
@@ -371,6 +375,22 @@ static void gbe_turn_on(void)
 	}
 	if (i == 10000)
 		printk(KERN_ERR "gbefb: turn on DMA timed out\n");
+
+	gbe_turned_on = 1;
+}
+
+static void gbe_loadcmap(void)
+{
+	int i, j;
+
+	for (i = 0; i < 256; i++) {
+		for (j = 0; j < 1000 && gbe->cm_fifo >= 63; j++)
+			udelay(10);
+		if (j == 1000)
+			printk(KERN_ERR "gbefb: cmap FIFO timeout\n");
+
+		gbe->cmap[i] = gbe_cmap[i];
+	}
 }
 
 /*
@@ -382,6 +402,7 @@ static int gbefb_blank(int blank, struct fb_info *info)
 	switch (blank) {
 	case FB_BLANK_UNBLANK:		/* unblank */
 		gbe_turn_on();
+		gbe_loadcmap();
 		break;
 
 	case FB_BLANK_NORMAL:		/* blank */
@@ -796,16 +817,10 @@ static int gbefb_set_par(struct fb_info *info)
 		gbe->gmap[i] = (i << 24) | (i << 16) | (i << 8);
 
 	/* Initialize the color map */
-	for (i = 0; i < 256; i++) {
-		int j;
-
-		for (j = 0; j < 1000 && gbe->cm_fifo >= 63; j++)
-			udelay(10);
-		if (j == 1000)
-			printk(KERN_ERR "gbefb: cmap FIFO timeout\n");
+	for (i = 0; i < 256; i++)
+		gbe_cmap[i] = (i << 8) | (i << 16) | (i << 24);
 
-		gbe->cmap[i] = (i << 8) | (i << 16) | (i << 24);
-	}
+	gbe_loadcmap();
 
 	return 0;
 }
@@ -855,14 +870,17 @@ static int gbefb_setcolreg(unsigned regno, unsigned red, unsigned green,
 	blue >>= 8;
 
 	if (info->var.bits_per_pixel <= 8) {
-		/* wait for the color map FIFO to have a free entry */
-		for (i = 0; i < 1000 && gbe->cm_fifo >= 63; i++)
-			udelay(10);
-		if (i == 1000) {
-			printk(KERN_ERR "gbefb: cmap FIFO timeout\n");
-			return 1;
+		gbe_cmap[regno] = (red << 24) | (green << 16) | (blue << 8);
+		if (gbe_turned_on) {
+			/* wait for the color map FIFO to have a free entry */
+			for (i = 0; i < 1000 && gbe->cm_fifo >= 63; i++)
+				udelay(10);
+			if (i == 1000) {
+				printk(KERN_ERR "gbefb: cmap FIFO timeout\n");
+				return 1;
+			}
+			gbe->cmap[regno] = gbe_cmap[regno];
 		}
-		gbe->cmap[regno] = (red << 24) | (green << 16) | (blue << 8);
 	} else if (regno < 16) {
 		switch (info->var.bits_per_pixel) {
 		case 15:
diff --git a/drivers/video/hitfb.c b/drivers/video/hitfb.c
index 392a8be6aa76..e6467cf9f19f 100644
--- a/drivers/video/hitfb.c
+++ b/drivers/video/hitfb.c
@@ -27,7 +27,7 @@
 #include <asm/pgtable.h>
 #include <asm/io.h>
 #include <asm/hd64461.h>
-#include <asm/cpu/dac.h>
+#include <cpu/dac.h>
 
 #define	WIDTH 640
 
diff --git a/drivers/video/imxfb.c b/drivers/video/imxfb.c
index 0c5a475c1cae..ccd986140c95 100644
--- a/drivers/video/imxfb.c
+++ b/drivers/video/imxfb.c
@@ -33,9 +33,9 @@
 #include <linux/platform_device.h>
 #include <linux/dma-mapping.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
-#include <asm/arch/imxfb.h>
+#include <mach/imxfb.h>
 
 /*
  * Complain if VAR is out of range.
diff --git a/drivers/video/macfb.c b/drivers/video/macfb.c
index aa8c714d6245..b790ddff76f9 100644
--- a/drivers/video/macfb.c
+++ b/drivers/video/macfb.c
@@ -596,7 +596,7 @@ static struct fb_ops macfb_ops = {
 	.fb_imageblit	= cfb_imageblit,
 };
 
-void __init macfb_setup(char *options)
+static void __init macfb_setup(char *options)
 {
 	char *this_opt;
 	
diff --git a/drivers/video/matrox/i2c-matroxfb.c b/drivers/video/matrox/i2c-matroxfb.c
index 75ee5a12e549..c14e3e2212b3 100644
--- a/drivers/video/matrox/i2c-matroxfb.c
+++ b/drivers/video/matrox/i2c-matroxfb.c
@@ -87,13 +87,7 @@ static int matroxfb_gpio_getscl(void* data) {
 	return (matroxfb_read_gpio(b->minfo) & b->mask.clock) ? 1 : 0;
 }
 
-static struct i2c_adapter matrox_i2c_adapter_template =
-{
-	.owner =	THIS_MODULE,
-	.id =		I2C_HW_B_G400,
-};
-
-static struct i2c_algo_bit_data matrox_i2c_algo_template =
+static const struct i2c_algo_bit_data matrox_i2c_algo_template =
 {
 	.setsda		= matroxfb_gpio_setsda,
 	.setscl		= matroxfb_gpio_setscl,
@@ -112,7 +106,7 @@ static int i2c_bus_reg(struct i2c_bit_adapter* b, struct matrox_fb_info* minfo,
 	b->minfo = minfo;
 	b->mask.data = data;
 	b->mask.clock = clock;
-	b->adapter = matrox_i2c_adapter_template;
+	b->adapter.owner = THIS_MODULE;
 	snprintf(b->adapter.name, sizeof(b->adapter.name), name,
 		minfo->fbcon.node);
 	i2c_set_adapdata(&b->adapter, b);
@@ -187,6 +181,17 @@ static void* i2c_matroxfb_probe(struct matrox_fb_info* minfo) {
 				  MAT_DATA, MAT_CLK, "MAVEN:fb%u", 0);
 		if (err)
 			printk(KERN_INFO "i2c-matroxfb: Could not register Maven i2c bus. Continuing anyway.\n");
+		else {
+			struct i2c_board_info maven_info = {
+				I2C_BOARD_INFO("maven", 0x1b),
+			};
+			unsigned short const addr_list[2] = {
+				0x1b, I2C_CLIENT_END
+			};
+
+			i2c_new_probed_device(&m2info->maven.adapter,
+					      &maven_info, addr_list);
+		}
 	}
 	return m2info;
 fail_ddc1:;
diff --git a/drivers/video/matrox/matroxfb_base.c b/drivers/video/matrox/matroxfb_base.c
index 54e82f35353d..c02136202792 100644
--- a/drivers/video/matrox/matroxfb_base.c
+++ b/drivers/video/matrox/matroxfb_base.c
@@ -2536,7 +2536,7 @@ module_param(fh, int, 0);
 MODULE_PARM_DESC(fh, "Startup horizontal frequency, 0-999kHz, 1000-INF Hz");
 module_param(fv, int, 0);
 MODULE_PARM_DESC(fv, "Startup vertical frequency, 0-INF Hz\n"
-"You should specify \"fv:max_monitor_vsync,fh:max_monitor_hsync,maxclk:max_monitor_dotclock\"\n");
+"You should specify \"fv:max_monitor_vsync,fh:max_monitor_hsync,maxclk:max_monitor_dotclock\"");
 module_param(grayscale, int, 0);
 MODULE_PARM_DESC(grayscale, "Sets display into grayscale. Works perfectly with paletized videomode (4, 8bpp), some limitations apply to 16, 24 and 32bpp videomodes (default=nograyscale)");
 module_param(cross4MB, int, 0);
diff --git a/drivers/video/matrox/matroxfb_maven.c b/drivers/video/matrox/matroxfb_maven.c
index 89da27bd5c49..042408a8c631 100644
--- a/drivers/video/matrox/matroxfb_maven.c
+++ b/drivers/video/matrox/matroxfb_maven.c
@@ -19,8 +19,6 @@
 #include <linux/matroxfb.h>
 #include <asm/div64.h>
 
-#define MAVEN_I2CID	(0x1B)
-
 #define MGATVO_B	1
 #define MGATVO_C	2
 
@@ -128,7 +126,7 @@ static int get_ctrl_id(__u32 v4l2_id) {
 
 struct maven_data {
 	struct matrox_fb_info*		primary_head;
-	struct i2c_client		client;
+	struct i2c_client		*client;
 	int				version;
 };
 
@@ -974,7 +972,7 @@ static inline int maven_compute_timming(struct maven_data* md,
 
 static int maven_program_timming(struct maven_data* md,
 		const struct mavenregs* m) {
-	struct i2c_client* c = &md->client;
+	struct i2c_client *c = md->client;
 
 	if (m->mode == MATROXFB_OUTPUT_MODE_MONITOR) {
 		LR(0x80);
@@ -1011,7 +1009,7 @@ static int maven_program_timming(struct maven_data* md,
 }
 
 static inline int maven_resync(struct maven_data* md) {
-	struct i2c_client* c = &md->client;
+	struct i2c_client *c = md->client;
 	maven_set_reg(c, 0x95, 0x20);	/* start whole thing */
 	return 0;
 }
@@ -1069,48 +1067,48 @@ static int maven_set_control (struct maven_data* md,
 		  maven_compute_bwlevel(md, &blacklevel, &whitelevel);
 		  blacklevel = (blacklevel >> 2) | ((blacklevel & 3) << 8);
 		  whitelevel = (whitelevel >> 2) | ((whitelevel & 3) << 8);
-		  maven_set_reg_pair(&md->client, 0x0e, blacklevel);
-		  maven_set_reg_pair(&md->client, 0x1e, whitelevel);
+		  maven_set_reg_pair(md->client, 0x0e, blacklevel);
+		  maven_set_reg_pair(md->client, 0x1e, whitelevel);
 		}
 		break;
 		case V4L2_CID_SATURATION:
 		{
-		  maven_set_reg(&md->client, 0x20, p->value);
-		  maven_set_reg(&md->client, 0x22, p->value);
+		  maven_set_reg(md->client, 0x20, p->value);
+		  maven_set_reg(md->client, 0x22, p->value);
 		}
 		break;
 		case V4L2_CID_HUE:
 		{
-		  maven_set_reg(&md->client, 0x25, p->value);
+		  maven_set_reg(md->client, 0x25, p->value);
 		}
 		break;
 		case V4L2_CID_GAMMA:
 		{
 		  const struct maven_gamma* g;
 		  g = maven_compute_gamma(md);
-		  maven_set_reg(&md->client, 0x83, g->reg83);
-		  maven_set_reg(&md->client, 0x84, g->reg84);
-		  maven_set_reg(&md->client, 0x85, g->reg85);
-		  maven_set_reg(&md->client, 0x86, g->reg86);
-		  maven_set_reg(&md->client, 0x87, g->reg87);
-		  maven_set_reg(&md->client, 0x88, g->reg88);
-		  maven_set_reg(&md->client, 0x89, g->reg89);
-		  maven_set_reg(&md->client, 0x8a, g->reg8a);
-		  maven_set_reg(&md->client, 0x8b, g->reg8b);
+		  maven_set_reg(md->client, 0x83, g->reg83);
+		  maven_set_reg(md->client, 0x84, g->reg84);
+		  maven_set_reg(md->client, 0x85, g->reg85);
+		  maven_set_reg(md->client, 0x86, g->reg86);
+		  maven_set_reg(md->client, 0x87, g->reg87);
+		  maven_set_reg(md->client, 0x88, g->reg88);
+		  maven_set_reg(md->client, 0x89, g->reg89);
+		  maven_set_reg(md->client, 0x8a, g->reg8a);
+		  maven_set_reg(md->client, 0x8b, g->reg8b);
 		}
 		break;
 		case MATROXFB_CID_TESTOUT:
 		{
 			unsigned char val 
-			  = maven_get_reg(&md->client,0x8d);
+			  = maven_get_reg(md->client, 0x8d);
 			if (p->value) val |= 0x10;
 			else          val &= ~0x10;
-			maven_set_reg(&md->client, 0x8d, val);
+			maven_set_reg(md->client, 0x8d, val);
 		}
 		break;
 		case MATROXFB_CID_DEFLICKER:
 		{
-		  maven_set_reg(&md->client, 0x93, maven_compute_deflicker(md));
+		  maven_set_reg(md->client, 0x93, maven_compute_deflicker(md));
 		}
 		break;
 	}
@@ -1189,6 +1187,7 @@ static int maven_init_client(struct i2c_client* clnt) {
 	MINFO_FROM(container_of(clnt->adapter, struct i2c_bit_adapter, adapter)->minfo);
 
 	md->primary_head = MINFO;
+	md->client = clnt;
 	down_write(&ACCESS_FBINFO(altout.lock));
 	ACCESS_FBINFO(outputs[1]).output = &maven_altout;
 	ACCESS_FBINFO(outputs[1]).src = ACCESS_FBINFO(outputs[1]).default_src;
@@ -1232,14 +1231,11 @@ static int maven_shutdown_client(struct i2c_client* clnt) {
 	return 0;
 }
 
-static const unsigned short normal_i2c[] = { MAVEN_I2CID, I2C_CLIENT_END };
-I2C_CLIENT_INSMOD;
-
-static struct i2c_driver maven_driver;
-
-static int maven_detect_client(struct i2c_adapter* adapter, int address, int kind) {
-	int err = 0;
-	struct i2c_client* new_client;
+static int maven_probe(struct i2c_client *client,
+		       const struct i2c_device_id *id)
+{
+	struct i2c_adapter *adapter = client->adapter;
+	int err = -ENODEV;
 	struct maven_data* data;
 
 	if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_WRITE_WORD_DATA |
@@ -1250,50 +1246,37 @@ static int maven_detect_client(struct i2c_adapter* adapter, int address, int kin
 		err = -ENOMEM;
 		goto ERROR0;
 	}
-	new_client = &data->client;
-	i2c_set_clientdata(new_client, data);
-	new_client->addr = address;
-	new_client->adapter = adapter;
-	new_client->driver = &maven_driver;
-	new_client->flags = 0;
-	strlcpy(new_client->name, "maven", I2C_NAME_SIZE);
-	if ((err = i2c_attach_client(new_client)))
-		goto ERROR3;
-	err = maven_init_client(new_client);
+	i2c_set_clientdata(client, data);
+	err = maven_init_client(client);
 	if (err)
 		goto ERROR4;
 	return 0;
 ERROR4:;
-	i2c_detach_client(new_client);
-ERROR3:;
-	kfree(new_client);
+	kfree(data);
 ERROR0:;
 	return err;
 }
 
-static int maven_attach_adapter(struct i2c_adapter* adapter) {
-	if (adapter->id == I2C_HW_B_G400)
-		return i2c_probe(adapter, &addr_data, &maven_detect_client);
-	return 0;
-}
-
-static int maven_detach_client(struct i2c_client* client) {
-	int err;
-
-	if ((err = i2c_detach_client(client)))
-		return err;
+static int maven_remove(struct i2c_client *client)
+{
 	maven_shutdown_client(client);
 	kfree(i2c_get_clientdata(client));
 	return 0;
 }
 
+static const struct i2c_device_id maven_id[] = {
+	{ "maven", 0 },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, maven_id);
+
 static struct i2c_driver maven_driver={
 	.driver = {
 		.name	= "maven",
 	},
-	.id		= I2C_DRIVERID_MGATVO,
-	.attach_adapter	= maven_attach_adapter,
-	.detach_client	= maven_detach_client,
+	.probe		= maven_probe,
+	.remove		= maven_remove,
+	.id_table	= maven_id,
 };
 
 static int __init matroxfb_maven_init(void)
diff --git a/drivers/video/omap/blizzard.c b/drivers/video/omap/blizzard.c
index 4d8ad9cd0e19..9dfcf39d3367 100644
--- a/drivers/video/omap/blizzard.c
+++ b/drivers/video/omap/blizzard.c
@@ -26,9 +26,9 @@
 #include <linux/delay.h>
 #include <linux/clk.h>
 
-#include <asm/arch/dma.h>
-#include <asm/arch/omapfb.h>
-#include <asm/arch/blizzard.h>
+#include <mach/dma.h>
+#include <mach/omapfb.h>
+#include <mach/blizzard.h>
 
 #include "dispc.h"
 
diff --git a/drivers/video/omap/dispc.c b/drivers/video/omap/dispc.c
index ab77c51fe9d6..6efcf89e7fbe 100644
--- a/drivers/video/omap/dispc.c
+++ b/drivers/video/omap/dispc.c
@@ -25,9 +25,9 @@
 #include <linux/clk.h>
 #include <linux/io.h>
 
-#include <asm/arch/sram.h>
-#include <asm/arch/omapfb.h>
-#include <asm/arch/board.h>
+#include <mach/sram.h>
+#include <mach/omapfb.h>
+#include <mach/board.h>
 
 #include "dispc.h"
 
diff --git a/drivers/video/omap/hwa742.c b/drivers/video/omap/hwa742.c
index 1e642b7a20fe..f24df0b54e1c 100644
--- a/drivers/video/omap/hwa742.c
+++ b/drivers/video/omap/hwa742.c
@@ -26,9 +26,9 @@
 #include <linux/delay.h>
 #include <linux/clk.h>
 
-#include <asm/arch/dma.h>
-#include <asm/arch/omapfb.h>
-#include <asm/arch/hwa742.h>
+#include <mach/dma.h>
+#include <mach/omapfb.h>
+#include <mach/hwa742.h>
 
 #define HWA742_REV_CODE_REG       0x0
 #define HWA742_CONFIG_REG         0x2
diff --git a/drivers/video/omap/lcd_h3.c b/drivers/video/omap/lcd_h3.c
index 31e978349a80..2486237ebba5 100644
--- a/drivers/video/omap/lcd_h3.c
+++ b/drivers/video/omap/lcd_h3.c
@@ -23,8 +23,8 @@
 #include <linux/platform_device.h>
 #include <linux/i2c/tps65010.h>
 
-#include <asm/arch/gpio.h>
-#include <asm/arch/omapfb.h>
+#include <mach/gpio.h>
+#include <mach/omapfb.h>
 
 #define MODULE_NAME	"omapfb-lcd_h3"
 
diff --git a/drivers/video/omap/lcd_h4.c b/drivers/video/omap/lcd_h4.c
index fd6f0eb16de1..88c19d424ef7 100644
--- a/drivers/video/omap/lcd_h4.c
+++ b/drivers/video/omap/lcd_h4.c
@@ -22,7 +22,7 @@
 #include <linux/module.h>
 #include <linux/platform_device.h>
 
-#include <asm/arch/omapfb.h>
+#include <mach/omapfb.h>
 
 static int h4_panel_init(struct lcd_panel *panel, struct omapfb_device *fbdev)
 {
diff --git a/drivers/video/omap/lcd_inn1510.c b/drivers/video/omap/lcd_inn1510.c
index 551f385861d1..6953ed4b5820 100644
--- a/drivers/video/omap/lcd_inn1510.c
+++ b/drivers/video/omap/lcd_inn1510.c
@@ -23,8 +23,8 @@
 #include <linux/platform_device.h>
 #include <linux/io.h>
 
-#include <asm/arch/fpga.h>
-#include <asm/arch/omapfb.h>
+#include <mach/fpga.h>
+#include <mach/omapfb.h>
 
 static int innovator1510_panel_init(struct lcd_panel *panel,
 				    struct omapfb_device *fbdev)
diff --git a/drivers/video/omap/lcd_inn1610.c b/drivers/video/omap/lcd_inn1610.c
index 5ef119c813e0..6a42c6a0cd99 100644
--- a/drivers/video/omap/lcd_inn1610.c
+++ b/drivers/video/omap/lcd_inn1610.c
@@ -22,8 +22,8 @@
 #include <linux/module.h>
 #include <linux/platform_device.h>
 
-#include <asm/arch/gpio.h>
-#include <asm/arch/omapfb.h>
+#include <mach/gpio.h>
+#include <mach/omapfb.h>
 
 #define MODULE_NAME	"omapfb-lcd_h3"
 
diff --git a/drivers/video/omap/lcd_osk.c b/drivers/video/omap/lcd_osk.c
index a38038840fd6..a4a725f427a4 100644
--- a/drivers/video/omap/lcd_osk.c
+++ b/drivers/video/omap/lcd_osk.c
@@ -23,9 +23,9 @@
 #include <linux/module.h>
 #include <linux/platform_device.h>
 
-#include <asm/arch/gpio.h>
-#include <asm/arch/mux.h>
-#include <asm/arch/omapfb.h>
+#include <mach/gpio.h>
+#include <mach/mux.h>
+#include <mach/omapfb.h>
 
 static int osk_panel_init(struct lcd_panel *panel, struct omapfb_device *fbdev)
 {
diff --git a/drivers/video/omap/lcd_palmte.c b/drivers/video/omap/lcd_palmte.c
index 52bdfdac42c9..218317366e6e 100644
--- a/drivers/video/omap/lcd_palmte.c
+++ b/drivers/video/omap/lcd_palmte.c
@@ -23,8 +23,8 @@
 #include <linux/platform_device.h>
 #include <linux/io.h>
 
-#include <asm/arch/fpga.h>
-#include <asm/arch/omapfb.h>
+#include <mach/fpga.h>
+#include <mach/omapfb.h>
 
 static int palmte_panel_init(struct lcd_panel *panel,
 				struct omapfb_device *fbdev)
diff --git a/drivers/video/omap/lcd_palmtt.c b/drivers/video/omap/lcd_palmtt.c
index 4bb349f54356..57b0f6cf6a5a 100644
--- a/drivers/video/omap/lcd_palmtt.c
+++ b/drivers/video/omap/lcd_palmtt.c
@@ -29,8 +29,8 @@ GPIO13 - screen blanking
 #include <linux/module.h>
 #include <linux/io.h>
 
-#include <asm/arch/gpio.h>
-#include <asm/arch/omapfb.h>
+#include <mach/gpio.h>
+#include <mach/omapfb.h>
 
 static int palmtt_panel_init(struct lcd_panel *panel,
 	struct omapfb_device *fbdev)
diff --git a/drivers/video/omap/lcd_palmz71.c b/drivers/video/omap/lcd_palmz71.c
index ea6170ddff35..d33d78b11723 100644
--- a/drivers/video/omap/lcd_palmz71.c
+++ b/drivers/video/omap/lcd_palmz71.c
@@ -24,7 +24,7 @@
 #include <linux/platform_device.h>
 #include <linux/io.h>
 
-#include <asm/arch/omapfb.h>
+#include <mach/omapfb.h>
 
 static int palmz71_panel_init(struct lcd_panel *panel,
 			      struct omapfb_device *fbdev)
diff --git a/drivers/video/omap/lcd_sx1.c b/drivers/video/omap/lcd_sx1.c
index c4f306a4e5c9..caa6a896cb8b 100644
--- a/drivers/video/omap/lcd_sx1.c
+++ b/drivers/video/omap/lcd_sx1.c
@@ -23,10 +23,10 @@
 #include <linux/delay.h>
 #include <linux/io.h>
 
-#include <asm/arch/gpio.h>
-#include <asm/arch/omapfb.h>
-#include <asm/arch/mcbsp.h>
-#include <asm/arch/mux.h>
+#include <mach/gpio.h>
+#include <mach/omapfb.h>
+#include <mach/mcbsp.h>
+#include <mach/mux.h>
 
 /*
  * OMAP310 GPIO registers
diff --git a/drivers/video/omap/lcdc.c b/drivers/video/omap/lcdc.c
index fb19ed4992db..83514f066712 100644
--- a/drivers/video/omap/lcdc.c
+++ b/drivers/video/omap/lcdc.c
@@ -29,8 +29,8 @@
 #include <linux/vmalloc.h>
 #include <linux/clk.h>
 
-#include <asm/arch/dma.h>
-#include <asm/arch/omapfb.h>
+#include <mach/dma.h>
+#include <mach/omapfb.h>
 
 #include <asm/mach-types.h>
 
diff --git a/drivers/video/omap/omapfb_main.c b/drivers/video/omap/omapfb_main.c
index f85af5c4fa68..51a138bd113c 100644
--- a/drivers/video/omap/omapfb_main.c
+++ b/drivers/video/omap/omapfb_main.c
@@ -28,9 +28,8 @@
 #include <linux/mm.h>
 #include <linux/uaccess.h>
 
-#include <asm/mach-types.h>
-#include <asm/arch/dma.h>
-#include <asm/arch/omapfb.h>
+#include <mach/dma.h>
+#include <mach/omapfb.h>
 
 #define MODULE_NAME	"omapfb"
 
diff --git a/drivers/video/omap/rfbi.c b/drivers/video/omap/rfbi.c
index 789cfd23c36b..4a6f13d3facf 100644
--- a/drivers/video/omap/rfbi.c
+++ b/drivers/video/omap/rfbi.c
@@ -27,7 +27,7 @@
 #include <linux/clk.h>
 #include <linux/io.h>
 
-#include <asm/arch/omapfb.h>
+#include <mach/omapfb.h>
 
 #include "dispc.h"
 
diff --git a/drivers/video/omap/sossi.c b/drivers/video/omap/sossi.c
index 81dbcf53cf0e..6359353c2c67 100644
--- a/drivers/video/omap/sossi.c
+++ b/drivers/video/omap/sossi.c
@@ -24,8 +24,8 @@
 #include <linux/irq.h>
 #include <linux/io.h>
 
-#include <asm/arch/dma.h>
-#include <asm/arch/omapfb.h>
+#include <mach/dma.h>
+#include <mach/omapfb.h>
 
 #include "lcdc.h"
 
@@ -646,7 +646,7 @@ static int sossi_init(struct omapfb_device *fbdev)
 	sossi_write_reg(SOSSI_INIT1_REG, l);
 
 	if ((r = request_irq(INT_1610_SoSSI_MATCH, sossi_match_irq,
-			     IRQT_FALLING,
+			     IRQ_TYPE_EDGE_FALLING,
 	     "sossi_match", sossi.fbdev->dev)) < 0) {
 		dev_err(sossi.fbdev->dev, "can't get SoSSI match IRQ\n");
 		goto err;
diff --git a/drivers/video/pm2fb.c b/drivers/video/pm2fb.c
index 3f1ca2adda3d..c6dd924976a4 100644
--- a/drivers/video/pm2fb.c
+++ b/drivers/video/pm2fb.c
@@ -1746,6 +1746,7 @@ static void __devexit pm2fb_remove(struct pci_dev *pdev)
 	release_mem_region(fix->mmio_start, fix->mmio_len);
 
 	pci_set_drvdata(pdev, NULL);
+	fb_dealloc_cmap(&info->cmap);
 	kfree(info->pixmap.addr);
 	kfree(info);
 }
diff --git a/drivers/video/pnx4008/dum.h b/drivers/video/pnx4008/dum.h
index d80a614d89ed..1234d4375d92 100644
--- a/drivers/video/pnx4008/dum.h
+++ b/drivers/video/pnx4008/dum.h
@@ -12,7 +12,7 @@
 #ifndef __PNX008_DUM_H__
 #define __PNX008_DUM_H__
 
-#include <asm/arch/platform.h>
+#include <mach/platform.h>
 
 #define PNX4008_DUMCONF_VA_BASE		IO_ADDRESS(PNX4008_DUMCONF_BASE)
 #define PNX4008_DUM_MAIN_VA_BASE	IO_ADDRESS(PNX4008_DUM_MAINCFG_BASE)
diff --git a/drivers/video/pnx4008/sdum.c b/drivers/video/pnx4008/sdum.c
index d23bf0d659b6..2aa09bce3944 100644
--- a/drivers/video/pnx4008/sdum.c
+++ b/drivers/video/pnx4008/sdum.c
@@ -30,7 +30,7 @@
 #include <linux/dma-mapping.h>
 #include <linux/clk.h>
 #include <asm/uaccess.h>
-#include <asm/arch/gpio.h>
+#include <mach/gpio.h>
 
 #include "sdum.h"
 #include "fbcommon.h"
diff --git a/drivers/video/pvr2fb.c b/drivers/video/pvr2fb.c
index 8c863a7f654b..0a0fd48a8566 100644
--- a/drivers/video/pvr2fb.c
+++ b/drivers/video/pvr2fb.c
@@ -58,18 +58,18 @@
 
 #ifdef CONFIG_SH_DREAMCAST
 #include <asm/machvec.h>
-#include <asm/mach/sysasic.h>
+#include <mach-dreamcast/mach/sysasic.h>
 #endif
 
 #ifdef CONFIG_SH_DMA
 #include <linux/pagemap.h>
-#include <asm/mach/dma.h>
+#include <mach/dma.h>
 #include <asm/dma.h>
 #endif
 
 #ifdef CONFIG_SH_STORE_QUEUES
 #include <linux/uaccess.h>
-#include <asm/cpu/sq.h>
+#include <cpu/sq.h>
 #endif
 
 #ifndef PCI_DEVICE_ID_NEC_NEON250
diff --git a/drivers/video/pxafb.c b/drivers/video/pxafb.c
index 2b707a8ce5de..97204497d9f7 100644
--- a/drivers/video/pxafb.c
+++ b/drivers/video/pxafb.c
@@ -45,14 +45,14 @@
 #include <linux/kthread.h>
 #include <linux/freezer.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 #include <asm/irq.h>
 #include <asm/div64.h>
-#include <asm/arch/pxa-regs.h>
-#include <asm/arch/pxa2xx-gpio.h>
-#include <asm/arch/bitfield.h>
-#include <asm/arch/pxafb.h>
+#include <mach/pxa-regs.h>
+#include <mach/pxa2xx-gpio.h>
+#include <mach/bitfield.h>
+#include <mach/pxafb.h>
 
 /*
  * Complain if VAR is out of range.
@@ -1031,7 +1031,9 @@ static void pxafb_setup_gpio(struct pxafb_info *fbi)
 	pxa_gpio_mode(GPIO74_LCD_FCLK_MD);
 	pxa_gpio_mode(GPIO75_LCD_LCLK_MD);
 	pxa_gpio_mode(GPIO76_LCD_PCLK_MD);
-	pxa_gpio_mode(GPIO77_LCD_ACBIAS_MD);
+
+	if ((lccr0 & LCCR0_PAS) == 0)
+		pxa_gpio_mode(GPIO77_LCD_ACBIAS_MD);
 }
 
 static void pxafb_enable_controller(struct pxafb_info *fbi)
@@ -1336,7 +1338,7 @@ static int __devinit pxafb_map_video_memory(struct pxafb_info *fbi)
 		fbi->dma_buff_phys = fbi->map_dma;
 		fbi->palette_cpu = (u16 *) fbi->dma_buff->palette;
 
-	        pr_debug("pxafb: palette_mem_size = 0x%08lx\n", fbi->palette_size*sizeof(u16));
+	        pr_debug("pxafb: palette_mem_size = 0x%08x\n", fbi->palette_size*sizeof(u16));
 
 #ifdef CONFIG_FB_PXA_SMARTPANEL
 		fbi->smart_cmds = (uint16_t *) fbi->dma_buff->cmd_buff;
@@ -1400,6 +1402,8 @@ static void pxafb_decode_mach_info(struct pxafb_info *fbi,
 	if (lcd_conn == LCD_MONO_STN_8BPP)
 		fbi->lccr0 |= LCCR0_DPD;
 
+	fbi->lccr0 |= (lcd_conn & LCD_ALTERNATE_MAPPING) ? LCCR0_LDDALT : 0;
+
 	fbi->lccr3 = LCCR3_Acb((inf->lcd_conn >> 10) & 0xff);
 	fbi->lccr3 |= (lcd_conn & LCD_BIAS_ACTIVE_LOW) ? LCCR3_OEP : 0;
 	fbi->lccr3 |= (lcd_conn & LCD_PCLK_EDGE_FALL)  ? LCCR3_PCP : 0;
@@ -1673,53 +1677,63 @@ MODULE_PARM_DESC(options, "LCD parameters (see Documentation/fb/pxafb.txt)");
 #define pxafb_setup_options()		(0)
 #endif
 
-static int __devinit pxafb_probe(struct platform_device *dev)
-{
-	struct pxafb_info *fbi;
-	struct pxafb_mach_info *inf;
-	struct resource *r;
-	int irq, ret;
-
-	dev_dbg(&dev->dev, "pxafb_probe\n");
-
-	inf = dev->dev.platform_data;
-	ret = -ENOMEM;
-	fbi = NULL;
-	if (!inf)
-		goto failed;
-
-	ret = pxafb_parse_options(&dev->dev, g_options);
-	if (ret < 0)
-		goto failed;
-
 #ifdef DEBUG_VAR
-	/* Check for various illegal bit-combinations. Currently only
-	 * a warning is given. */
+/* Check for various illegal bit-combinations. Currently only
+ * a warning is given. */
+static void __devinit pxafb_check_options(struct device *dev,
+					  struct pxafb_mach_info *inf)
+{
+	if (inf->lcd_conn)
+		return;
 
 	if (inf->lccr0 & LCCR0_INVALID_CONFIG_MASK)
-		dev_warn(&dev->dev, "machine LCCR0 setting contains "
+		dev_warn(dev, "machine LCCR0 setting contains "
 				"illegal bits: %08x\n",
 			inf->lccr0 & LCCR0_INVALID_CONFIG_MASK);
 	if (inf->lccr3 & LCCR3_INVALID_CONFIG_MASK)
-		dev_warn(&dev->dev, "machine LCCR3 setting contains "
+		dev_warn(dev, "machine LCCR3 setting contains "
 				"illegal bits: %08x\n",
 			inf->lccr3 & LCCR3_INVALID_CONFIG_MASK);
 	if (inf->lccr0 & LCCR0_DPD &&
 	    ((inf->lccr0 & LCCR0_PAS) != LCCR0_Pas ||
 	     (inf->lccr0 & LCCR0_SDS) != LCCR0_Sngl ||
 	     (inf->lccr0 & LCCR0_CMS) != LCCR0_Mono))
-		dev_warn(&dev->dev, "Double Pixel Data (DPD) mode is "
+		dev_warn(dev, "Double Pixel Data (DPD) mode is "
 				"only valid in passive mono"
 				" single panel mode\n");
 	if ((inf->lccr0 & LCCR0_PAS) == LCCR0_Act &&
 	    (inf->lccr0 & LCCR0_SDS) == LCCR0_Dual)
-		dev_warn(&dev->dev, "Dual panel only valid in passive mode\n");
+		dev_warn(dev, "Dual panel only valid in passive mode\n");
 	if ((inf->lccr0 & LCCR0_PAS) == LCCR0_Pas &&
 	     (inf->modes->upper_margin || inf->modes->lower_margin))
-		dev_warn(&dev->dev, "Upper and lower margins must be 0 in "
+		dev_warn(dev, "Upper and lower margins must be 0 in "
 				"passive mode\n");
+}
+#else
+#define pxafb_check_options(...)	do {} while (0)
 #endif
 
+static int __devinit pxafb_probe(struct platform_device *dev)
+{
+	struct pxafb_info *fbi;
+	struct pxafb_mach_info *inf;
+	struct resource *r;
+	int irq, ret;
+
+	dev_dbg(&dev->dev, "pxafb_probe\n");
+
+	inf = dev->dev.platform_data;
+	ret = -ENOMEM;
+	fbi = NULL;
+	if (!inf)
+		goto failed;
+
+	ret = pxafb_parse_options(&dev->dev, g_options);
+	if (ret < 0)
+		goto failed;
+
+	pxafb_check_options(&dev->dev, inf);
+
 	dev_dbg(&dev->dev, "got a %dx%dx%d LCD\n",
 			inf->modes->xres,
 			inf->modes->yres,
diff --git a/drivers/video/s3c2410fb.c b/drivers/video/s3c2410fb.c
index f0598961c6b0..79cf0b1976aa 100644
--- a/drivers/video/s3c2410fb.c
+++ b/drivers/video/s3c2410fb.c
@@ -29,9 +29,9 @@
 #include <asm/div64.h>
 
 #include <asm/mach/map.h>
-#include <asm/arch/regs-lcd.h>
-#include <asm/arch/regs-gpio.h>
-#include <asm/arch/fb.h>
+#include <mach/regs-lcd.h>
+#include <mach/regs-gpio.h>
+#include <mach/fb.h>
 
 #ifdef CONFIG_PM
 #include <linux/pm.h>
diff --git a/drivers/video/s3fb.c b/drivers/video/s3fb.c
index 2972f112dbed..4dcec48a1d78 100644
--- a/drivers/video/s3fb.c
+++ b/drivers/video/s3fb.c
@@ -11,7 +11,6 @@
  * which is based on the code of neofb.
  */
 
-#include <linux/version.h>
 #include <linux/module.h>
 #include <linux/kernel.h>
 #include <linux/errno.h>
@@ -903,13 +902,13 @@ static int __devinit s3_pci_probe(struct pci_dev *dev, const struct pci_device_i
 	/* Prepare PCI device */
 	rc = pci_enable_device(dev);
 	if (rc < 0) {
-		dev_err(info->dev, "cannot enable PCI device\n");
+		dev_err(info->device, "cannot enable PCI device\n");
 		goto err_enable_device;
 	}
 
 	rc = pci_request_regions(dev, "s3fb");
 	if (rc < 0) {
-		dev_err(info->dev, "cannot reserve framebuffer region\n");
+		dev_err(info->device, "cannot reserve framebuffer region\n");
 		goto err_request_regions;
 	}
 
@@ -921,7 +920,7 @@ static int __devinit s3_pci_probe(struct pci_dev *dev, const struct pci_device_i
 	info->screen_base = pci_iomap(dev, 0, 0);
 	if (! info->screen_base) {
 		rc = -ENOMEM;
-		dev_err(info->dev, "iomap for framebuffer failed\n");
+		dev_err(info->device, "iomap for framebuffer failed\n");
 		goto err_iomap;
 	}
 
@@ -965,19 +964,19 @@ static int __devinit s3_pci_probe(struct pci_dev *dev, const struct pci_device_i
 	rc = fb_find_mode(&(info->var), info, mode_option, NULL, 0, NULL, 8);
 	if (! ((rc == 1) || (rc == 2))) {
 		rc = -EINVAL;
-		dev_err(info->dev, "mode %s not found\n", mode_option);
+		dev_err(info->device, "mode %s not found\n", mode_option);
 		goto err_find_mode;
 	}
 
 	rc = fb_alloc_cmap(&info->cmap, 256, 0);
 	if (rc < 0) {
-		dev_err(info->dev, "cannot allocate colormap\n");
+		dev_err(info->device, "cannot allocate colormap\n");
 		goto err_alloc_cmap;
 	}
 
 	rc = register_framebuffer(info);
 	if (rc < 0) {
-		dev_err(info->dev, "cannot register framebuffer\n");
+		dev_err(info->device, "cannot register framebuffer\n");
 		goto err_reg_fb;
 	}
 
@@ -1053,7 +1052,7 @@ static int s3_pci_suspend(struct pci_dev* dev, pm_message_t state)
 	struct fb_info *info = pci_get_drvdata(dev);
 	struct s3fb_info *par = info->par;
 
-	dev_info(info->dev, "suspend\n");
+	dev_info(info->device, "suspend\n");
 
 	acquire_console_sem();
 	mutex_lock(&(par->open_lock));
@@ -1085,7 +1084,7 @@ static int s3_pci_resume(struct pci_dev* dev)
 	struct s3fb_info *par = info->par;
 	int err;
 
-	dev_info(info->dev, "resume\n");
+	dev_info(info->device, "resume\n");
 
 	acquire_console_sem();
 	mutex_lock(&(par->open_lock));
@@ -1102,7 +1101,7 @@ static int s3_pci_resume(struct pci_dev* dev)
 	if (err) {
 		mutex_unlock(&(par->open_lock));
 		release_console_sem();
-		dev_err(info->dev, "error %d enabling device for resume\n", err);
+		dev_err(info->device, "error %d enabling device for resume\n", err);
 		return err;
 	}
 	pci_set_master(dev);
diff --git a/drivers/video/sa1100fb.c b/drivers/video/sa1100fb.c
index 78bcdbc3f484..c052bd4c0b06 100644
--- a/drivers/video/sa1100fb.c
+++ b/drivers/video/sa1100fb.c
@@ -177,11 +177,11 @@
 #include <linux/dma-mapping.h>
 #include <linux/mutex.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 #include <asm/mach-types.h>
-#include <asm/arch/assabet.h>
-#include <asm/arch/shannon.h>
+#include <mach/assabet.h>
+#include <mach/shannon.h>
 
 /*
  * debugging?
diff --git a/drivers/video/sh7760fb.c b/drivers/video/sh7760fb.c
index 4d0e28c5790b..8d0212da4514 100644
--- a/drivers/video/sh7760fb.c
+++ b/drivers/video/sh7760fb.c
@@ -152,6 +152,7 @@ static int sh7760fb_setcmap(struct fb_cmap *cmap, struct fb_info *info)
 		col |= ((*g) & 0xff) << 8;
 		col |= ((*b) & 0xff);
 		col &= SH7760FB_PALETTE_MASK;
+		iowrite32(col, par->base + LDPR(s));
 
 		if (s < 16)
 			((u32 *) (info->pseudo_palette))[s] = s;
diff --git a/drivers/video/sh_mobile_lcdcfb.c b/drivers/video/sh_mobile_lcdcfb.c
index f6ef6cca73cd..4c32c06579a0 100644
--- a/drivers/video/sh_mobile_lcdcfb.c
+++ b/drivers/video/sh_mobile_lcdcfb.c
@@ -595,6 +595,8 @@ static int __init sh_mobile_lcdc_probe(struct platform_device *pdev)
 		info->fbops = &sh_mobile_lcdc_ops;
 		info->var.xres = info->var.xres_virtual = cfg->lcd_cfg.xres;
 		info->var.yres = info->var.yres_virtual = cfg->lcd_cfg.yres;
+		info->var.width = cfg->lcd_size_cfg.width;
+		info->var.height = cfg->lcd_size_cfg.height;
 		info->var.activate = FB_ACTIVATE_NOW;
 		error = sh_mobile_lcdc_set_bpp(&info->var, cfg->bpp);
 		if (error)
diff --git a/drivers/video/sticore.h b/drivers/video/sticore.h
index 1a9a60c74be3..7fe5be4bc70e 100644
--- a/drivers/video/sticore.h
+++ b/drivers/video/sticore.h
@@ -352,8 +352,6 @@ struct sti_struct *sti_get_rom(unsigned int index); /* 0: default sti */
 
 /* functions to call the STI ROM directly */
 
-int  sti_init_graph(struct sti_struct *sti);
-void sti_inq_conf(struct sti_struct *sti);
 void sti_putc(struct sti_struct *sti, int c, int y, int x);
 void sti_set(struct sti_struct *sti, int src_y, int src_x,
 	     int height, int width, u8 color);
diff --git a/drivers/video/stifb.c b/drivers/video/stifb.c
index 598d35eff935..166481402412 100644
--- a/drivers/video/stifb.c
+++ b/drivers/video/stifb.c
@@ -1078,8 +1078,7 @@ static struct fb_ops stifb_ops = {
  *  Initialization
  */
 
-int __init
-stifb_init_fb(struct sti_struct *sti, int bpp_pref)
+static int __init stifb_init_fb(struct sti_struct *sti, int bpp_pref)
 {
 	struct fb_fix_screeninfo *fix;
 	struct fb_var_screeninfo *var;
@@ -1315,8 +1314,7 @@ static int stifb_disabled __initdata;
 int __init
 stifb_setup(char *options);
 
-int __init
-stifb_init(void)
+static int __init stifb_init(void)
 {
 	struct sti_struct *sti;
 	struct sti_struct *def_sti;
diff --git a/drivers/video/tdfxfb.c b/drivers/video/tdfxfb.c
index 77aafcfae037..4599a4385bc9 100644
--- a/drivers/video/tdfxfb.c
+++ b/drivers/video/tdfxfb.c
@@ -95,7 +95,6 @@ static inline int mtrr_del(int reg, unsigned long base,
 #define VOODOO5_MAX_PIXCLOCK 350000
 
 static struct fb_fix_screeninfo tdfx_fix __devinitdata = {
-	.id =		"3Dfx",
 	.type =		FB_TYPE_PACKED_PIXELS,
 	.visual =	FB_VISUAL_PSEUDOCOLOR,
 	.ypanstep =	1,
@@ -426,7 +425,7 @@ static unsigned long do_lfb_size(struct tdfx_par *par, unsigned short dev_id)
 	if (dev_id < PCI_DEVICE_ID_3DFX_VOODOO5) {
 		/* Banshee/Voodoo3 */
 		chip_size = 2;
-		if (has_sgram && (draminit0 & DRAMINIT0_SGRAM_TYPE))
+		if (has_sgram && !(draminit0 & DRAMINIT0_SGRAM_TYPE))
 			chip_size = 1;
 	} else {
 		/* Voodoo4/5 */
@@ -1200,15 +1199,15 @@ static int __devinit tdfxfb_probe(struct pci_dev *pdev,
 	/* Configure the default fb_fix_screeninfo first */
 	switch (pdev->device) {
 	case PCI_DEVICE_ID_3DFX_BANSHEE:
-		strcat(tdfx_fix.id, " Banshee");
+		strcpy(tdfx_fix.id, "3Dfx Banshee");
 		default_par->max_pixclock = BANSHEE_MAX_PIXCLOCK;
 		break;
 	case PCI_DEVICE_ID_3DFX_VOODOO3:
-		strcat(tdfx_fix.id, " Voodoo3");
+		strcpy(tdfx_fix.id, "3Dfx Voodoo3");
 		default_par->max_pixclock = VOODOO3_MAX_PIXCLOCK;
 		break;
 	case PCI_DEVICE_ID_3DFX_VOODOO5:
-		strcat(tdfx_fix.id, " Voodoo5");
+		strcpy(tdfx_fix.id, "3Dfx Voodoo5");
 		default_par->max_pixclock = VOODOO5_MAX_PIXCLOCK;
 		break;
 	}
diff --git a/drivers/video/vermilion/vermilion.h b/drivers/video/vermilion/vermilion.h
index c4aba59d4809..7491abfcf1fc 100644
--- a/drivers/video/vermilion/vermilion.h
+++ b/drivers/video/vermilion/vermilion.h
@@ -30,7 +30,6 @@
 #define _VERMILION_H_
 
 #include <linux/kernel.h>
-#include <linux/version.h>
 #include <linux/pci.h>
 #include <asm/atomic.h>
 #include <linux/mutex.h>
diff --git a/drivers/video/vt8623fb.c b/drivers/video/vt8623fb.c
index 536ab11623f0..3df17dc8c3d7 100644
--- a/drivers/video/vt8623fb.c
+++ b/drivers/video/vt8623fb.c
@@ -12,7 +12,6 @@
  * (http://davesdomain.org.uk/viafb/)
  */
 
-#include <linux/version.h>
 #include <linux/module.h>
 #include <linux/kernel.h>
 #include <linux/errno.h>
@@ -677,13 +676,13 @@ static int __devinit vt8623_pci_probe(struct pci_dev *dev, const struct pci_devi
 
 	rc = pci_enable_device(dev);
 	if (rc < 0) {
-		dev_err(info->dev, "cannot enable PCI device\n");
+		dev_err(info->device, "cannot enable PCI device\n");
 		goto err_enable_device;
 	}
 
 	rc = pci_request_regions(dev, "vt8623fb");
 	if (rc < 0) {
-		dev_err(info->dev, "cannot reserve framebuffer region\n");
+		dev_err(info->device, "cannot reserve framebuffer region\n");
 		goto err_request_regions;
 	}
 
@@ -696,14 +695,14 @@ static int __devinit vt8623_pci_probe(struct pci_dev *dev, const struct pci_devi
 	info->screen_base = pci_iomap(dev, 0, 0);
 	if (! info->screen_base) {
 		rc = -ENOMEM;
-		dev_err(info->dev, "iomap for framebuffer failed\n");
+		dev_err(info->device, "iomap for framebuffer failed\n");
 		goto err_iomap_1;
 	}
 
 	par->mmio_base = pci_iomap(dev, 1, 0);
 	if (! par->mmio_base) {
 		rc = -ENOMEM;
-		dev_err(info->dev, "iomap for MMIO failed\n");
+		dev_err(info->device, "iomap for MMIO failed\n");
 		goto err_iomap_2;
 	}
 
@@ -714,7 +713,7 @@ static int __devinit vt8623_pci_probe(struct pci_dev *dev, const struct pci_devi
 	if ((16 <= memsize1) && (memsize1 <= 64) && (memsize1 == memsize2))
 		info->screen_size = memsize1 << 20;
 	else {
-		dev_err(info->dev, "memory size detection failed (%x %x), suppose 16 MB\n", memsize1, memsize2);
+		dev_err(info->device, "memory size detection failed (%x %x), suppose 16 MB\n", memsize1, memsize2);
 		info->screen_size = 16 << 20;
 	}
 
@@ -731,19 +730,19 @@ static int __devinit vt8623_pci_probe(struct pci_dev *dev, const struct pci_devi
 	rc = fb_find_mode(&(info->var), info, mode_option, NULL, 0, NULL, 8);
 	if (! ((rc == 1) || (rc == 2))) {
 		rc = -EINVAL;
-		dev_err(info->dev, "mode %s not found\n", mode_option);
+		dev_err(info->device, "mode %s not found\n", mode_option);
 		goto err_find_mode;
 	}
 
 	rc = fb_alloc_cmap(&info->cmap, 256, 0);
 	if (rc < 0) {
-		dev_err(info->dev, "cannot allocate colormap\n");
+		dev_err(info->device, "cannot allocate colormap\n");
 		goto err_alloc_cmap;
 	}
 
 	rc = register_framebuffer(info);
 	if (rc < 0) {
-		dev_err(info->dev, "cannot register framebugger\n");
+		dev_err(info->device, "cannot register framebugger\n");
 		goto err_reg_fb;
 	}
 
@@ -817,7 +816,7 @@ static int vt8623_pci_suspend(struct pci_dev* dev, pm_message_t state)
 	struct fb_info *info = pci_get_drvdata(dev);
 	struct vt8623fb_info *par = info->par;
 
-	dev_info(info->dev, "suspend\n");
+	dev_info(info->device, "suspend\n");
 
 	acquire_console_sem();
 	mutex_lock(&(par->open_lock));
@@ -848,16 +847,13 @@ static int vt8623_pci_resume(struct pci_dev* dev)
 	struct fb_info *info = pci_get_drvdata(dev);
 	struct vt8623fb_info *par = info->par;
 
-	dev_info(info->dev, "resume\n");
+	dev_info(info->device, "resume\n");
 
 	acquire_console_sem();
 	mutex_lock(&(par->open_lock));
 
-	if (par->ref_count == 0) {
-		mutex_unlock(&(par->open_lock));
-		release_console_sem();
-		return 0;
-	}
+	if (par->ref_count == 0)
+		goto fail;
 
 	pci_set_power_state(dev, PCI_D0);
 	pci_restore_state(dev);
@@ -870,8 +866,8 @@ static int vt8623_pci_resume(struct pci_dev* dev)
 	vt8623fb_set_par(info);
 	fb_set_suspend(info, 0);
 
-	mutex_unlock(&(par->open_lock));
 fail:
+	mutex_unlock(&(par->open_lock));
 	release_console_sem();
 
 	return 0;
diff --git a/drivers/video/xilinxfb.c b/drivers/video/xilinxfb.c
index 7b3a8423f485..5da3d2423cc0 100644
--- a/drivers/video/xilinxfb.c
+++ b/drivers/video/xilinxfb.c
@@ -24,7 +24,6 @@
 #include <linux/device.h>
 #include <linux/module.h>
 #include <linux/kernel.h>
-#include <linux/version.h>
 #include <linux/errno.h>
 #include <linux/string.h>
 #include <linux/mm.h>
diff --git a/drivers/virtio/virtio.c b/drivers/virtio/virtio.c
index 7084e7e146c0..5b78fd0aff0a 100644
--- a/drivers/virtio/virtio.c
+++ b/drivers/virtio/virtio.c
@@ -71,13 +71,6 @@ static int virtio_uevent(struct device *_dv, struct kobj_uevent_env *env)
 			      dev->id.device, dev->id.vendor);
 }
 
-static struct bus_type virtio_bus = {
-	.name  = "virtio",
-	.match = virtio_dev_match,
-	.dev_attrs = virtio_dev_attrs,
-	.uevent = virtio_uevent,
-};
-
 static void add_status(struct virtio_device *dev, unsigned status)
 {
 	dev->config->set_status(dev, dev->config->get_status(dev) | status);
@@ -120,12 +113,16 @@ static int virtio_dev_probe(struct device *_d)
 			set_bit(f, dev->features);
 	}
 
+	/* Transport features always preserved to pass to finalize_features. */
+	for (i = VIRTIO_TRANSPORT_F_START; i < VIRTIO_TRANSPORT_F_END; i++)
+		if (device_features & (1 << i))
+			set_bit(i, dev->features);
+
 	err = drv->probe(dev);
 	if (err)
 		add_status(dev, VIRTIO_CONFIG_S_FAILED);
 	else {
-		/* They should never have set feature bits beyond 32 */
-		dev->config->set_features(dev, dev->features[0]);
+		dev->config->finalize_features(dev);
 		add_status(dev, VIRTIO_CONFIG_S_DRIVER_OK);
 	}
 	return err;
@@ -147,13 +144,20 @@ static int virtio_dev_remove(struct device *_d)
 	return 0;
 }
 
+static struct bus_type virtio_bus = {
+	.name  = "virtio",
+	.match = virtio_dev_match,
+	.dev_attrs = virtio_dev_attrs,
+	.uevent = virtio_uevent,
+	.probe = virtio_dev_probe,
+	.remove = virtio_dev_remove,
+};
+
 int register_virtio_driver(struct virtio_driver *driver)
 {
 	/* Catch this early. */
 	BUG_ON(driver->feature_table_size && !driver->feature_table);
 	driver->driver.bus = &virtio_bus;
-	driver->driver.probe = virtio_dev_probe;
-	driver->driver.remove = virtio_dev_remove;
 	return driver_register(&driver->driver);
 }
 EXPORT_SYMBOL_GPL(register_virtio_driver);
diff --git a/drivers/virtio/virtio_balloon.c b/drivers/virtio/virtio_balloon.c
index bfef604160d1..62eab43152d2 100644
--- a/drivers/virtio/virtio_balloon.c
+++ b/drivers/virtio/virtio_balloon.c
@@ -158,7 +158,7 @@ static inline s64 towards_target(struct virtio_balloon *vb)
 	vb->vdev->config->get(vb->vdev,
 			      offsetof(struct virtio_balloon_config, num_pages),
 			      &v, sizeof(v));
-	return v - vb->num_pages;
+	return (s64)v - vb->num_pages;
 }
 
 static void update_balloon_size(struct virtio_balloon *vb)
diff --git a/drivers/virtio/virtio_pci.c b/drivers/virtio/virtio_pci.c
index eae7236310e4..c7dc37c7cce9 100644
--- a/drivers/virtio/virtio_pci.c
+++ b/drivers/virtio/virtio_pci.c
@@ -94,12 +94,17 @@ static u32 vp_get_features(struct virtio_device *vdev)
 	return ioread32(vp_dev->ioaddr + VIRTIO_PCI_HOST_FEATURES);
 }
 
-/* virtio config->set_features() implementation */
-static void vp_set_features(struct virtio_device *vdev, u32 features)
+/* virtio config->finalize_features() implementation */
+static void vp_finalize_features(struct virtio_device *vdev)
 {
 	struct virtio_pci_device *vp_dev = to_vp_device(vdev);
 
-	iowrite32(features, vp_dev->ioaddr + VIRTIO_PCI_GUEST_FEATURES);
+	/* Give virtio_ring a chance to accept features. */
+	vring_transport_features(vdev);
+
+	/* We only support 32 feature bits. */
+	BUILD_BUG_ON(ARRAY_SIZE(vdev->features) != 1);
+	iowrite32(vdev->features[0], vp_dev->ioaddr+VIRTIO_PCI_GUEST_FEATURES);
 }
 
 /* virtio config->get() implementation */
@@ -297,7 +302,7 @@ static struct virtio_config_ops virtio_pci_config_ops = {
 	.find_vq	= vp_find_vq,
 	.del_vq		= vp_del_vq,
 	.get_features	= vp_get_features,
-	.set_features	= vp_set_features,
+	.finalize_features = vp_finalize_features,
 };
 
 /* the PCI probing function */
diff --git a/drivers/virtio/virtio_ring.c b/drivers/virtio/virtio_ring.c
index 72bf8bc09014..6eb5303fed11 100644
--- a/drivers/virtio/virtio_ring.c
+++ b/drivers/virtio/virtio_ring.c
@@ -18,6 +18,7 @@
  */
 #include <linux/virtio.h>
 #include <linux/virtio_ring.h>
+#include <linux/virtio_config.h>
 #include <linux/device.h>
 
 #ifdef DEBUG
@@ -87,8 +88,11 @@ static int vring_add_buf(struct virtqueue *_vq,
 	if (vq->num_free < out + in) {
 		pr_debug("Can't add buf len %i - avail = %i\n",
 			 out + in, vq->num_free);
-		/* We notify *even if* VRING_USED_F_NO_NOTIFY is set here. */
-		vq->notify(&vq->vq);
+		/* FIXME: for historical reasons, we force a notify here if
+		 * there are outgoing parts to the buffer.  Presumably the
+		 * host should service the ring ASAP. */
+		if (out)
+			vq->notify(&vq->vq);
 		END_USE(vq);
 		return -ENOSPC;
 	}
@@ -320,4 +324,19 @@ void vring_del_virtqueue(struct virtqueue *vq)
 }
 EXPORT_SYMBOL_GPL(vring_del_virtqueue);
 
+/* Manipulates transport-specific feature bits. */
+void vring_transport_features(struct virtio_device *vdev)
+{
+	unsigned int i;
+
+	for (i = VIRTIO_TRANSPORT_F_START; i < VIRTIO_TRANSPORT_F_END; i++) {
+		switch (i) {
+		default:
+			/* We don't understand this bit. */
+			clear_bit(i, vdev->features);
+		}
+	}
+}
+EXPORT_SYMBOL_GPL(vring_transport_features);
+
 MODULE_LICENSE("GPL");
diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig
index 48399e134c0d..c51036716700 100644
--- a/drivers/watchdog/Kconfig
+++ b/drivers/watchdog/Kconfig
@@ -285,10 +285,11 @@ config ALIM1535_WDT
 
 config ALIM7101_WDT
 	tristate "ALi M7101 PMU Computer Watchdog"
-	depends on X86 && PCI
+	depends on PCI
 	help
 	  This is the driver for the hardware watchdog on the ALi M7101 PMU
-	  as used in the x86 Cobalt servers.
+	  as used in the x86 Cobalt servers and also found in some
+	  SPARC Netra servers too.
 
 	  To compile this driver as a module, choose M here: the
 	  module will be called alim7101_wdt.
@@ -463,7 +464,17 @@ config PC87413_WDT
 	  module will be called pc87413_wdt.
 
 	  Most people will say N.
- 
+
+config RDC321X_WDT
+	tristate "RDC R-321x SoC watchdog"
+	depends on X86_RDC321X
+	help
+	  This is the driver for the built in hardware watchdog
+	  in the RDC R-321x SoC.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called rdc321x_wdt.
+
 config 60XX_WDT
 	tristate "SBC-60XX Watchdog Timer"
 	depends on X86
@@ -632,6 +643,16 @@ config SBC_EPX_C3_WATCHDOG
 
 # MIPS Architecture
 
+config RC32434_WDT
+	tristate "IDT RC32434 SoC Watchdog Timer"
+	depends on MIKROTIK_RB532
+	help
+	  Hardware driver for the IDT RC32434 SoC built-in
+	  watchdog timer.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called rc32434_wdt.
+
 config INDYDOG
 	tristate "Indy/I2 Hardware Watchdog"
 	depends on SGI_HAS_INDYDOG
@@ -691,13 +712,17 @@ config MPC5200_WDT
 	tristate "MPC5200 Watchdog Timer"
 	depends on PPC_MPC52xx
 
-config 8xx_WDT
-	tristate "MPC8xx Watchdog Timer"
-	depends on 8xx
+config 8xxx_WDT
+	tristate "MPC8xxx Platform Watchdog Timer"
+	depends on PPC_8xx || PPC_83xx || PPC_86xx
+	help
+	  This driver is for a SoC level watchdog that exists on some
+	  Freescale PowerPC processors. So far this driver supports:
+	  - MPC8xx watchdogs
+	  - MPC83xx watchdogs
+	  - MPC86xx watchdogs
 
-config 83xx_WDT
-	tristate "MPC83xx Watchdog Timer"
-	depends on PPC_83xx
+	  For BookE processors (MPC85xx) use the BOOKE_WDT driver instead.
 
 config MV64X60_WDT
 	tristate "MV64X60 (Marvell Discovery) Watchdog Timer"
diff --git a/drivers/watchdog/Makefile b/drivers/watchdog/Makefile
index edd305a64e63..e0ef123fbdea 100644
--- a/drivers/watchdog/Makefile
+++ b/drivers/watchdog/Makefile
@@ -66,12 +66,16 @@ obj-$(CONFIG_IB700_WDT) += ib700wdt.o
 obj-$(CONFIG_IBMASR) += ibmasr.o
 obj-$(CONFIG_WAFER_WDT) += wafer5823wdt.o
 obj-$(CONFIG_I6300ESB_WDT) += i6300esb.o
-obj-$(CONFIG_ITCO_WDT) += iTCO_wdt.o iTCO_vendor_support.o
+obj-$(CONFIG_ITCO_WDT) += iTCO_wdt.o
+ifeq ($(CONFIG_ITCO_VENDOR_SUPPORT),y)
+obj-$(CONFIG_ITCO_WDT) += iTCO_vendor_support.o
+endif
 obj-$(CONFIG_IT8712F_WDT) += it8712f_wdt.o
 obj-$(CONFIG_HP_WATCHDOG) += hpwdt.o
 obj-$(CONFIG_SC1200_WDT) += sc1200wdt.o
 obj-$(CONFIG_SCx200_WDT) += scx200_wdt.o
 obj-$(CONFIG_PC87413_WDT) += pc87413_wdt.o
+obj-$(CONFIG_RDC321X_WDT) += rdc321x_wdt.o
 obj-$(CONFIG_60XX_WDT) += sbc60xxwdt.o
 obj-$(CONFIG_SBC8360_WDT) += sbc8360.o
 obj-$(CONFIG_SBC7240_WDT) += sbc7240_wdt.o
@@ -91,8 +95,9 @@ obj-$(CONFIG_SBC_EPX_C3_WATCHDOG) += sbc_epx_c3.o
 # M68KNOMMU Architecture
 
 # MIPS Architecture
+obj-$(CONFIG_RC32434_WDT) += rc32434_wdt.o
 obj-$(CONFIG_INDYDOG) += indydog.o
-obj-$(CONFIG_WDT_MTX1)	+= mtx-1_wdt.o
+obj-$(CONFIG_WDT_MTX1) += mtx-1_wdt.o
 obj-$(CONFIG_WDT_RM9K_GPI) += rm9k_wdt.o
 obj-$(CONFIG_SIBYTE_WDOG) += sb_wdog.o
 obj-$(CONFIG_AR7_WDT) += ar7_wdt.o
@@ -101,9 +106,8 @@ obj-$(CONFIG_TXX9_WDT) += txx9wdt.o
 # PARISC Architecture
 
 # POWERPC Architecture
-obj-$(CONFIG_8xx_WDT) += mpc8xx_wdt.o
 obj-$(CONFIG_MPC5200_WDT) += mpc5200_wdt.o
-obj-$(CONFIG_83xx_WDT) += mpc83xx_wdt.o
+obj-$(CONFIG_8xxx_WDT) += mpc8xxx_wdt.o
 obj-$(CONFIG_MV64X60_WDT) += mv64x60_wdt.o
 obj-$(CONFIG_BOOKE_WDT) += booke_wdt.o
 
diff --git a/drivers/watchdog/acquirewdt.c b/drivers/watchdog/acquirewdt.c
index 85269c365a10..6e46a551395c 100644
--- a/drivers/watchdog/acquirewdt.c
+++ b/drivers/watchdog/acquirewdt.c
@@ -58,39 +58,45 @@
 #include <linux/types.h>		/* For standard types (like size_t) */
 #include <linux/errno.h>		/* For the -ENODEV/... values */
 #include <linux/kernel.h>		/* For printk/panic/... */
-#include <linux/miscdevice.h>		/* For MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR) */
+#include <linux/miscdevice.h>		/* For MODULE_ALIAS_MISCDEV
+							(WATCHDOG_MINOR) */
 #include <linux/watchdog.h>		/* For the watchdog specific items */
 #include <linux/fs.h>			/* For file operations */
 #include <linux/ioport.h>		/* For io-port access */
 #include <linux/platform_device.h>	/* For platform_driver framework */
 #include <linux/init.h>			/* For __init/__exit/... */
-
-#include <asm/uaccess.h>		/* For copy_to_user/put_user/... */
-#include <asm/io.h>			/* For inb/outb/... */
+#include <linux/uaccess.h>		/* For copy_to_user/put_user/... */
+#include <linux/io.h>			/* For inb/outb/... */
 
 /* Module information */
 #define DRV_NAME "acquirewdt"
 #define PFX DRV_NAME ": "
 #define WATCHDOG_NAME "Acquire WDT"
-#define WATCHDOG_HEARTBEAT 0	/* There is no way to see what the correct time-out period is */
+/* There is no way to see what the correct time-out period is */
+#define WATCHDOG_HEARTBEAT 0
 
 /* internal variables */
-static struct platform_device *acq_platform_device;	/* the watchdog platform device */
+/* the watchdog platform device */
+static struct platform_device *acq_platform_device;
 static unsigned long acq_is_open;
 static char expect_close;
 
 /* module parameters */
-static int wdt_stop = 0x43;	/* You must set this - there is no sane way to probe for this board. */
+/* You must set this - there is no sane way to probe for this board. */
+static int wdt_stop = 0x43;
 module_param(wdt_stop, int, 0);
 MODULE_PARM_DESC(wdt_stop, "Acquire WDT 'stop' io port (default 0x43)");
 
-static int wdt_start = 0x443;	/* You must set this - there is no sane way to probe for this board. */
+/* You must set this - there is no sane way to probe for this board. */
+static int wdt_start = 0x443;
 module_param(wdt_start, int, 0);
 MODULE_PARM_DESC(wdt_start, "Acquire WDT 'start' io port (default 0x443)");
 
 static int nowayout = WATCHDOG_NOWAYOUT;
 module_param(nowayout, int, 0);
-MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=" __MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
+MODULE_PARM_DESC(nowayout,
+	"Watchdog cannot be stopped once started (default="
+	__MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
 
 /*
  *	Watchdog Operations
@@ -112,18 +118,18 @@ static void acq_stop(void)
  *	/dev/watchdog handling
  */
 
-static ssize_t acq_write(struct file *file, const char __user *buf, size_t count, loff_t *ppos)
+static ssize_t acq_write(struct file *file, const char __user *buf,
+						size_t count, loff_t *ppos)
 {
 	/* See if we got the magic character 'V' and reload the timer */
-	if(count) {
+	if (count) {
 		if (!nowayout) {
 			size_t i;
-
 			/* note: just in case someone wrote the magic character
-			 * five months ago... */
+			   five months ago... */
 			expect_close = 0;
-
-			/* scan to see whether or not we got the magic character */
+			/* scan to see whether or not we got the
+			   magic character */
 			for (i = 0; i != count; i++) {
 				char c;
 				if (get_user(c, buf + i))
@@ -132,64 +138,55 @@ static ssize_t acq_write(struct file *file, const char __user *buf, size_t count
 					expect_close = 42;
 			}
 		}
-
-		/* Well, anyhow someone wrote to us, we should return that favour */
+		/* Well, anyhow someone wrote to us, we should
+				return that favour */
 		acq_keepalive();
 	}
 	return count;
 }
 
-static int acq_ioctl(struct inode *inode, struct file *file, unsigned int cmd,
-	unsigned long arg)
+static long acq_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
 {
 	int options, retval = -EINVAL;
 	void __user *argp = (void __user *)arg;
 	int __user *p = argp;
-	static struct watchdog_info ident =
-	{
+	static struct watchdog_info ident = {
 		.options = WDIOF_KEEPALIVEPING | WDIOF_MAGICCLOSE,
 		.firmware_version = 1,
 		.identity = WATCHDOG_NAME,
 	};
 
-	switch(cmd)
-	{
+	switch (cmd) {
 	case WDIOC_GETSUPPORT:
-	  return copy_to_user(argp, &ident, sizeof(ident)) ? -EFAULT : 0;
+		return copy_to_user(argp, &ident, sizeof(ident)) ? -EFAULT : 0;
 
 	case WDIOC_GETSTATUS:
 	case WDIOC_GETBOOTSTATUS:
-	  return put_user(0, p);
-
-	case WDIOC_KEEPALIVE:
-	  acq_keepalive();
-	  return 0;
-
-	case WDIOC_GETTIMEOUT:
-	  return put_user(WATCHDOG_HEARTBEAT, p);
+		return put_user(0, p);
 
 	case WDIOC_SETOPTIONS:
 	{
-	    if (get_user(options, p))
-	      return -EFAULT;
-
-	    if (options & WDIOS_DISABLECARD)
-	    {
-	      acq_stop();
-	      retval = 0;
-	    }
-
-	    if (options & WDIOS_ENABLECARD)
-	    {
-	      acq_keepalive();
-	      retval = 0;
-	    }
-
-	    return retval;
+		if (get_user(options, p))
+			return -EFAULT;
+		if (options & WDIOS_DISABLECARD) {
+			acq_stop();
+			retval = 0;
+		}
+		if (options & WDIOS_ENABLECARD) {
+			acq_keepalive();
+			retval = 0;
+		}
+		return retval;
 	}
+	case WDIOC_KEEPALIVE:
+		acq_keepalive();
+		return 0;
+
+	case WDIOC_GETTIMEOUT:
+		return put_user(WATCHDOG_HEARTBEAT, p);
 
 	default:
-	  return -ENOTTY;
+		return -ENOTTY;
 	}
 }
 
@@ -211,7 +208,8 @@ static int acq_close(struct inode *inode, struct file *file)
 	if (expect_close == 42) {
 		acq_stop();
 	} else {
-		printk(KERN_CRIT PFX "Unexpected close, not stopping watchdog!\n");
+		printk(KERN_CRIT PFX
+			"Unexpected close, not stopping watchdog!\n");
 		acq_keepalive();
 	}
 	clear_bit(0, &acq_is_open);
@@ -227,7 +225,7 @@ static const struct file_operations acq_fops = {
 	.owner		= THIS_MODULE,
 	.llseek		= no_llseek,
 	.write		= acq_write,
-	.ioctl		= acq_ioctl,
+	.unlocked_ioctl	= acq_ioctl,
 	.open		= acq_open,
 	.release	= acq_close,
 };
@@ -248,32 +246,29 @@ static int __devinit acq_probe(struct platform_device *dev)
 
 	if (wdt_stop != wdt_start) {
 		if (!request_region(wdt_stop, 1, WATCHDOG_NAME)) {
-			printk (KERN_ERR PFX "I/O address 0x%04x already in use\n",
-				wdt_stop);
+			printk(KERN_ERR PFX
+			    "I/O address 0x%04x already in use\n", wdt_stop);
 			ret = -EIO;
 			goto out;
 		}
 	}
 
 	if (!request_region(wdt_start, 1, WATCHDOG_NAME)) {
-		printk (KERN_ERR PFX "I/O address 0x%04x already in use\n",
+		printk(KERN_ERR PFX "I/O address 0x%04x already in use\n",
 			wdt_start);
 		ret = -EIO;
 		goto unreg_stop;
 	}
-
 	ret = misc_register(&acq_miscdev);
 	if (ret != 0) {
-		printk (KERN_ERR PFX "cannot register miscdev on minor=%d (err=%d)\n",
-			WATCHDOG_MINOR, ret);
+		printk(KERN_ERR PFX
+			"cannot register miscdev on minor=%d (err=%d)\n",
+							WATCHDOG_MINOR, ret);
 		goto unreg_regions;
 	}
-
-	printk (KERN_INFO PFX "initialized. (nowayout=%d)\n",
-		nowayout);
+	printk(KERN_INFO PFX "initialized. (nowayout=%d)\n", nowayout);
 
 	return 0;
-
 unreg_regions:
 	release_region(wdt_start, 1);
 unreg_stop:
@@ -286,9 +281,9 @@ out:
 static int __devexit acq_remove(struct platform_device *dev)
 {
 	misc_deregister(&acq_miscdev);
-	release_region(wdt_start,1);
-	if(wdt_stop != wdt_start)
-		release_region(wdt_stop,1);
+	release_region(wdt_start, 1);
+	if (wdt_stop != wdt_start)
+		release_region(wdt_stop, 1);
 
 	return 0;
 }
@@ -313,18 +308,19 @@ static int __init acq_init(void)
 {
 	int err;
 
-	printk(KERN_INFO "WDT driver for Acquire single board computer initialising.\n");
+	printk(KERN_INFO
+	      "WDT driver for Acquire single board computer initialising.\n");
 
 	err = platform_driver_register(&acquirewdt_driver);
 	if (err)
 		return err;
 
-	acq_platform_device = platform_device_register_simple(DRV_NAME, -1, NULL, 0);
+	acq_platform_device = platform_device_register_simple(DRV_NAME,
+								-1, NULL, 0);
 	if (IS_ERR(acq_platform_device)) {
 		err = PTR_ERR(acq_platform_device);
 		goto unreg_platform_driver;
 	}
-
 	return 0;
 
 unreg_platform_driver:
diff --git a/drivers/watchdog/advantechwdt.c b/drivers/watchdog/advantechwdt.c
index 8121cc247343..a5110f93a755 100644
--- a/drivers/watchdog/advantechwdt.c
+++ b/drivers/watchdog/advantechwdt.c
@@ -37,9 +37,9 @@
 #include <linux/ioport.h>
 #include <linux/platform_device.h>
 #include <linux/init.h>
+#include <linux/io.h>
+#include <linux/uaccess.h>
 
-#include <asm/io.h>
-#include <asm/uaccess.h>
 #include <asm/system.h>
 
 #define DRV_NAME "advantechwdt"
@@ -47,7 +47,8 @@
 #define WATCHDOG_NAME "Advantech WDT"
 #define WATCHDOG_TIMEOUT 60		/* 60 sec default timeout */
 
-static struct platform_device *advwdt_platform_device;	/* the watchdog platform device */
+/* the watchdog platform device */
+static struct platform_device *advwdt_platform_device;
 static unsigned long advwdt_is_open;
 static char adv_expect_close;
 
@@ -72,35 +73,35 @@ MODULE_PARM_DESC(wdt_start, "Advantech WDT 'start' io port (default 0x443)");
 
 static int timeout = WATCHDOG_TIMEOUT;	/* in seconds */
 module_param(timeout, int, 0);
-MODULE_PARM_DESC(timeout, "Watchdog timeout in seconds. 1<= timeout <=63, default=" __MODULE_STRING(WATCHDOG_TIMEOUT) ".");
+MODULE_PARM_DESC(timeout,
+	"Watchdog timeout in seconds. 1<= timeout <=63, default="
+		__MODULE_STRING(WATCHDOG_TIMEOUT) ".");
 
 static int nowayout = WATCHDOG_NOWAYOUT;
 module_param(nowayout, int, 0);
-MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=" __MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
+MODULE_PARM_DESC(nowayout,
+	"Watchdog cannot be stopped once started (default="
+		__MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
 
 /*
  *	Watchdog Operations
  */
 
-static void
-advwdt_ping(void)
+static void advwdt_ping(void)
 {
 	/* Write a watchdog value */
 	outb_p(timeout, wdt_start);
 }
 
-static void
-advwdt_disable(void)
+static void advwdt_disable(void)
 {
 	inb_p(wdt_stop);
 }
 
-static int
-advwdt_set_heartbeat(int t)
+static int advwdt_set_heartbeat(int t)
 {
-	if ((t < 1) || (t > 63))
+	if (t < 1 || t > 63)
 		return -EINVAL;
-
 	timeout = t;
 	return 0;
 }
@@ -109,8 +110,8 @@ advwdt_set_heartbeat(int t)
  *	/dev/watchdog handling
  */
 
-static ssize_t
-advwdt_write(struct file *file, const char __user *buf, size_t count, loff_t *ppos)
+static ssize_t advwdt_write(struct file *file, const char __user *buf,
+						size_t count, loff_t *ppos)
 {
 	if (count) {
 		if (!nowayout) {
@@ -120,7 +121,7 @@ advwdt_write(struct file *file, const char __user *buf, size_t count, loff_t *pp
 
 			for (i = 0; i != count; i++) {
 				char c;
-				if (get_user(c, buf+i))
+				if (get_user(c, buf + i))
 					return -EFAULT;
 				if (c == 'V')
 					adv_expect_close = 42;
@@ -131,9 +132,7 @@ advwdt_write(struct file *file, const char __user *buf, size_t count, loff_t *pp
 	return count;
 }
 
-static int
-advwdt_ioctl(struct inode *inode, struct file *file, unsigned int cmd,
-	  unsigned long arg)
+static long advwdt_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
 {
 	int new_timeout;
 	void __user *argp = (void __user *)arg;
@@ -146,57 +145,50 @@ advwdt_ioctl(struct inode *inode, struct file *file, unsigned int cmd,
 
 	switch (cmd) {
 	case WDIOC_GETSUPPORT:
-	  if (copy_to_user(argp, &ident, sizeof(ident)))
-	    return -EFAULT;
-	  break;
+		if (copy_to_user(argp, &ident, sizeof(ident)))
+			return -EFAULT;
+		break;
 
 	case WDIOC_GETSTATUS:
 	case WDIOC_GETBOOTSTATUS:
-	  return put_user(0, p);
-
-	case WDIOC_KEEPALIVE:
-	  advwdt_ping();
-	  break;
-
-	case WDIOC_SETTIMEOUT:
-	  if (get_user(new_timeout, p))
-		  return -EFAULT;
-	  if (advwdt_set_heartbeat(new_timeout))
-		  return -EINVAL;
-	  advwdt_ping();
-	  /* Fall */
-
-	case WDIOC_GETTIMEOUT:
-	  return put_user(timeout, p);
+		return put_user(0, p);
 
 	case WDIOC_SETOPTIONS:
 	{
-	  int options, retval = -EINVAL;
-
-	  if (get_user(options, p))
-	    return -EFAULT;
-
-	  if (options & WDIOS_DISABLECARD) {
-	    advwdt_disable();
-	    retval = 0;
-	  }
+		int options, retval = -EINVAL;
 
-	  if (options & WDIOS_ENABLECARD) {
-	    advwdt_ping();
-	    retval = 0;
-	  }
-
-	  return retval;
+		if (get_user(options, p))
+			return -EFAULT;
+		if (options & WDIOS_DISABLECARD) {
+			advwdt_disable();
+			retval = 0;
+		}
+		if (options & WDIOS_ENABLECARD) {
+			advwdt_ping();
+			retval = 0;
+		}
+		return retval;
 	}
+	case WDIOC_KEEPALIVE:
+		advwdt_ping();
+		break;
 
+	case WDIOC_SETTIMEOUT:
+		if (get_user(new_timeout, p))
+			return -EFAULT;
+		if (advwdt_set_heartbeat(new_timeout))
+			return -EINVAL;
+		advwdt_ping();
+		/* Fall */
+	case WDIOC_GETTIMEOUT:
+		return put_user(timeout, p);
 	default:
-	  return -ENOTTY;
+		return -ENOTTY;
 	}
 	return 0;
 }
 
-static int
-advwdt_open(struct inode *inode, struct file *file)
+static int advwdt_open(struct inode *inode, struct file *file)
 {
 	if (test_and_set_bit(0, &advwdt_is_open))
 		return -EBUSY;
@@ -208,13 +200,13 @@ advwdt_open(struct inode *inode, struct file *file)
 	return nonseekable_open(inode, file);
 }
 
-static int
-advwdt_close(struct inode *inode, struct file *file)
+static int advwdt_close(struct inode *inode, struct file *file)
 {
 	if (adv_expect_close == 42) {
 		advwdt_disable();
 	} else {
-		printk(KERN_CRIT PFX "Unexpected close, not stopping watchdog!\n");
+		printk(KERN_CRIT PFX
+				"Unexpected close, not stopping watchdog!\n");
 		advwdt_ping();
 	}
 	clear_bit(0, &advwdt_is_open);
@@ -230,7 +222,7 @@ static const struct file_operations advwdt_fops = {
 	.owner		= THIS_MODULE,
 	.llseek		= no_llseek,
 	.write		= advwdt_write,
-	.ioctl		= advwdt_ioctl,
+	.unlocked_ioctl	= advwdt_ioctl,
 	.open		= advwdt_open,
 	.release	= advwdt_close,
 };
@@ -245,23 +237,24 @@ static struct miscdevice advwdt_miscdev = {
  *	Init & exit routines
  */
 
-static int __devinit
-advwdt_probe(struct platform_device *dev)
+static int __devinit advwdt_probe(struct platform_device *dev)
 {
 	int ret;
 
 	if (wdt_stop != wdt_start) {
 		if (!request_region(wdt_stop, 1, WATCHDOG_NAME)) {
-			printk (KERN_ERR PFX "I/O address 0x%04x already in use\n",
-				wdt_stop);
+			printk(KERN_ERR PFX
+				"I/O address 0x%04x already in use\n",
+								wdt_stop);
 			ret = -EIO;
 			goto out;
 		}
 	}
 
 	if (!request_region(wdt_start, 1, WATCHDOG_NAME)) {
-		printk (KERN_ERR PFX "I/O address 0x%04x already in use\n",
-			wdt_start);
+		printk(KERN_ERR PFX
+				"I/O address 0x%04x already in use\n",
+								wdt_start);
 		ret = -EIO;
 		goto unreg_stop;
 	}
@@ -269,20 +262,19 @@ advwdt_probe(struct platform_device *dev)
 	/* Check that the heartbeat value is within it's range ; if not reset to the default */
 	if (advwdt_set_heartbeat(timeout)) {
 		advwdt_set_heartbeat(WATCHDOG_TIMEOUT);
-		printk (KERN_INFO PFX "timeout value must be 1<=x<=63, using %d\n",
-			timeout);
+		printk(KERN_INFO PFX
+			"timeout value must be 1<=x<=63, using %d\n", timeout);
 	}
 
 	ret = misc_register(&advwdt_miscdev);
 	if (ret != 0) {
-		printk (KERN_ERR PFX "cannot register miscdev on minor=%d (err=%d)\n",
-			WATCHDOG_MINOR, ret);
+		printk(KERN_ERR PFX
+			"cannot register miscdev on minor=%d (err=%d)\n",
+							WATCHDOG_MINOR, ret);
 		goto unreg_regions;
 	}
-
-	printk (KERN_INFO PFX "initialized. timeout=%d sec (nowayout=%d)\n",
+	printk(KERN_INFO PFX "initialized. timeout=%d sec (nowayout=%d)\n",
 		timeout, nowayout);
-
 out:
 	return ret;
 unreg_regions:
@@ -293,19 +285,17 @@ unreg_stop:
 	goto out;
 }
 
-static int __devexit
-advwdt_remove(struct platform_device *dev)
+static int __devexit advwdt_remove(struct platform_device *dev)
 {
 	misc_deregister(&advwdt_miscdev);
-	release_region(wdt_start,1);
-	if(wdt_stop != wdt_start)
-		release_region(wdt_stop,1);
+	release_region(wdt_start, 1);
+	if (wdt_stop != wdt_start)
+		release_region(wdt_stop, 1);
 
 	return 0;
 }
 
-static void
-advwdt_shutdown(struct platform_device *dev)
+static void advwdt_shutdown(struct platform_device *dev)
 {
 	/* Turn the WDT off if we have a soft shutdown */
 	advwdt_disable();
@@ -321,18 +311,19 @@ static struct platform_driver advwdt_driver = {
 	},
 };
 
-static int __init
-advwdt_init(void)
+static int __init advwdt_init(void)
 {
 	int err;
 
-	printk(KERN_INFO "WDT driver for Advantech single board computer initialising.\n");
+	printk(KERN_INFO
+	     "WDT driver for Advantech single board computer initialising.\n");
 
 	err = platform_driver_register(&advwdt_driver);
 	if (err)
 		return err;
 
-	advwdt_platform_device = platform_device_register_simple(DRV_NAME, -1, NULL, 0);
+	advwdt_platform_device = platform_device_register_simple(DRV_NAME,
+								-1, NULL, 0);
 	if (IS_ERR(advwdt_platform_device)) {
 		err = PTR_ERR(advwdt_platform_device);
 		goto unreg_platform_driver;
@@ -345,8 +336,7 @@ unreg_platform_driver:
 	return err;
 }
 
-static void __exit
-advwdt_exit(void)
+static void __exit advwdt_exit(void)
 {
 	platform_device_unregister(advwdt_platform_device);
 	platform_driver_unregister(&advwdt_driver);
diff --git a/drivers/watchdog/alim1535_wdt.c b/drivers/watchdog/alim1535_wdt.c
index 2b1fbdb2fcf7..2a7690ecf97d 100644
--- a/drivers/watchdog/alim1535_wdt.c
+++ b/drivers/watchdog/alim1535_wdt.c
@@ -18,9 +18,8 @@
 #include <linux/init.h>
 #include <linux/fs.h>
 #include <linux/pci.h>
-
-#include <asm/uaccess.h>
-#include <asm/io.h>
+#include <linux/uaccess.h>
+#include <linux/io.h>
 
 #define WATCHDOG_NAME "ALi_M1535"
 #define PFX WATCHDOG_NAME ": "
@@ -30,17 +29,21 @@
 static unsigned long ali_is_open;
 static char ali_expect_release;
 static struct pci_dev *ali_pci;
-static u32 ali_timeout_bits;	/* stores the computed timeout */
+static u32 ali_timeout_bits;		/* stores the computed timeout */
 static DEFINE_SPINLOCK(ali_lock);	/* Guards the hardware */
 
 /* module parameters */
 static int timeout = WATCHDOG_TIMEOUT;
 module_param(timeout, int, 0);
-MODULE_PARM_DESC(timeout, "Watchdog timeout in seconds. (0<timeout<18000, default=" __MODULE_STRING(WATCHDOG_TIMEOUT) ")");
+MODULE_PARM_DESC(timeout,
+		"Watchdog timeout in seconds. (0 < timeout < 18000, default="
+				__MODULE_STRING(WATCHDOG_TIMEOUT) ")");
 
 static int nowayout = WATCHDOG_NOWAYOUT;
 module_param(nowayout, int, 0);
-MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=" __MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
+MODULE_PARM_DESC(nowayout,
+		"Watchdog cannot be stopped once started (default="
+				__MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
 
 /*
  *	ali_start	-	start watchdog countdown
@@ -103,15 +106,16 @@ static void ali_keepalive(void)
 
 static int ali_settimer(int t)
 {
-	if(t < 0)
+	if (t < 0)
 		return -EINVAL;
-	else if(t < 60)
+	else if (t < 60)
 		ali_timeout_bits = t|(1<<6);
-	else if(t < 3600)
+	else if (t < 3600)
 		ali_timeout_bits = (t/60)|(1<<7);
-	else if(t < 18000)
+	else if (t < 18000)
 		ali_timeout_bits = (t/300)|(1<<6)|(1<<7);
-	else return -EINVAL;
+	else
+		return -EINVAL;
 
 	timeout = t;
 	return 0;
@@ -134,21 +138,22 @@ static int ali_settimer(int t)
  */
 
 static ssize_t ali_write(struct file *file, const char __user *data,
-			      size_t len, loff_t * ppos)
+			      size_t len, loff_t *ppos)
 {
 	/* See if we got the magic character 'V' and reload the timer */
 	if (len) {
 		if (!nowayout) {
 			size_t i;
 
-			/* note: just in case someone wrote the magic character
-			 * five months ago... */
+			/* note: just in case someone wrote the
+			   magic character five months ago... */
 			ali_expect_release = 0;
 
-			/* scan to see whether or not we got the magic character */
+			/* scan to see whether or not we got
+			   the magic character */
 			for (i = 0; i != len; i++) {
 				char c;
-				if(get_user(c, data+i))
+				if (get_user(c, data + i))
 					return -EFAULT;
 				if (c == 'V')
 					ali_expect_release = 42;
@@ -163,7 +168,6 @@ static ssize_t ali_write(struct file *file, const char __user *data,
 
 /*
  *	ali_ioctl	-	handle watchdog ioctls
- *	@inode: VFS inode
  *	@file: VFS file pointer
  *	@cmd: ioctl number
  *	@arg: arguments to the ioctl
@@ -172,8 +176,7 @@ static ssize_t ali_write(struct file *file, const char __user *data,
  *	we want an extension to enable irq ack monitoring and the like
  */
 
-static int ali_ioctl(struct inode *inode, struct file *file,
-			  unsigned int cmd, unsigned long arg)
+static long ali_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
 {
 	void __user *argp = (void __user *)arg;
 	int __user *p = argp;
@@ -186,57 +189,45 @@ static int ali_ioctl(struct inode *inode, struct file *file,
 	};
 
 	switch (cmd) {
-		case WDIOC_GETSUPPORT:
-			return copy_to_user(argp, &ident,
-				sizeof (ident)) ? -EFAULT : 0;
-
-		case WDIOC_GETSTATUS:
-		case WDIOC_GETBOOTSTATUS:
-			return put_user(0, p);
-
-		case WDIOC_KEEPALIVE:
-			ali_keepalive();
-			return 0;
-
-		case WDIOC_SETOPTIONS:
-		{
-			int new_options, retval = -EINVAL;
-
-			if (get_user (new_options, p))
-				return -EFAULT;
-
-			if (new_options & WDIOS_DISABLECARD) {
-				ali_stop();
-				retval = 0;
-			}
-
-			if (new_options & WDIOS_ENABLECARD) {
-				ali_start();
-				retval = 0;
-			}
-
-			return retval;
+	case WDIOC_GETSUPPORT:
+		return copy_to_user(argp, &ident, sizeof(ident)) ? -EFAULT : 0;
+
+	case WDIOC_GETSTATUS:
+	case WDIOC_GETBOOTSTATUS:
+		return put_user(0, p);
+	case WDIOC_SETOPTIONS:
+	{
+		int new_options, retval = -EINVAL;
+
+		if (get_user(new_options, p))
+			return -EFAULT;
+		if (new_options & WDIOS_DISABLECARD) {
+			ali_stop();
+			retval = 0;
 		}
-
-		case WDIOC_SETTIMEOUT:
-		{
-			int new_timeout;
-
-			if (get_user(new_timeout, p))
-				return -EFAULT;
-
-			if (ali_settimer(new_timeout))
-			    return -EINVAL;
-
-			ali_keepalive();
-			/* Fall */
+		if (new_options & WDIOS_ENABLECARD) {
+			ali_start();
+			retval = 0;
 		}
-
-		case WDIOC_GETTIMEOUT:
-			return put_user(timeout, p);
-
-		default:
-			return -ENOTTY;
+		return retval;
+	}
+	case WDIOC_KEEPALIVE:
+		ali_keepalive();
+		return 0;
+	case WDIOC_SETTIMEOUT:
+	{
+		int new_timeout;
+		if (get_user(new_timeout, p))
+			return -EFAULT;
+		if (ali_settimer(new_timeout))
+			return -EINVAL;
+		ali_keepalive();
+		/* Fall */
+	}
+	case WDIOC_GETTIMEOUT:
+		return put_user(timeout, p);
+	default:
+		return -ENOTTY;
 	}
 }
 
@@ -274,10 +265,11 @@ static int ali_release(struct inode *inode, struct file *file)
 	/*
 	 *      Shut off the timer.
 	 */
-	if (ali_expect_release == 42) {
+	if (ali_expect_release == 42)
 		ali_stop();
-	} else {
-		printk(KERN_CRIT PFX "Unexpected close, not stopping watchdog!\n");
+	else {
+		printk(KERN_CRIT PFX
+				"Unexpected close, not stopping watchdog!\n");
 		ali_keepalive();
 	}
 	clear_bit(0, &ali_is_open);
@@ -292,13 +284,11 @@ static int ali_release(struct inode *inode, struct file *file)
  */
 
 
-static int ali_notify_sys(struct notifier_block *this, unsigned long code, void *unused)
+static int ali_notify_sys(struct notifier_block *this,
+					unsigned long code, void *unused)
 {
-	if (code==SYS_DOWN || code==SYS_HALT) {
-		/* Turn the WDT off */
-		ali_stop();
-	}
-
+	if (code == SYS_DOWN || code == SYS_HALT)
+		ali_stop();		/* Turn the WDT off */
 	return NOTIFY_DONE;
 }
 
@@ -340,10 +330,10 @@ static int __init ali_find_watchdog(void)
 
 	/* Check for the a 7101 PMU */
 	pdev = pci_get_device(PCI_VENDOR_ID_AL, 0x7101, NULL);
-	if(pdev == NULL)
+	if (pdev == NULL)
 		return -ENODEV;
 
-	if(pci_enable_device(pdev)) {
+	if (pci_enable_device(pdev)) {
 		pci_dev_put(pdev);
 		return -EIO;
 	}
@@ -355,9 +345,12 @@ static int __init ali_find_watchdog(void)
 	 */
 	pci_read_config_dword(pdev, 0xCC, &wdog);
 
-	wdog &= ~0x3F;		/* Timer bits */
-	wdog &= ~((1<<27)|(1<<26)|(1<<25)|(1<<24));	/* Issued events */
-	wdog &= ~((1<<16)|(1<<13)|(1<<12)|(1<<11)|(1<<10)|(1<<9));	/* No monitor bits */
+	/* Timer bits */
+	wdog &= ~0x3F;
+	/* Issued events */
+	wdog &= ~((1<<27)|(1<<26)|(1<<25)|(1<<24));
+	/* No monitor bits */
+	wdog &= ~((1<<16)|(1<<13)|(1<<12)|(1<<11)|(1<<10)|(1<<9));
 
 	pci_write_config_dword(pdev, 0xCC, wdog);
 
@@ -369,12 +362,12 @@ static int __init ali_find_watchdog(void)
  */
 
 static const struct file_operations ali_fops = {
-	.owner =	THIS_MODULE,
-	.llseek =	no_llseek,
-	.write =	ali_write,
-	.ioctl =	ali_ioctl,
-	.open =		ali_open,
-	.release =	ali_release,
+	.owner 		=	THIS_MODULE,
+	.llseek 	=	no_llseek,
+	.write		=	ali_write,
+	.unlocked_ioctl =	ali_ioctl,
+	.open 		=	ali_open,
+	.release 	=	ali_release,
 };
 
 static struct miscdevice ali_miscdev = {
@@ -399,15 +392,16 @@ static int __init watchdog_init(void)
 	int ret;
 
 	/* Check whether or not the hardware watchdog is there */
-	if (ali_find_watchdog() != 0) {
+	if (ali_find_watchdog() != 0)
 		return -ENODEV;
-	}
 
-	/* Check that the timeout value is within it's range ; if not reset to the default */
+	/* Check that the timeout value is within it's range;
+	   if not reset to the default */
 	if (timeout < 1 || timeout >= 18000) {
 		timeout = WATCHDOG_TIMEOUT;
-		printk(KERN_INFO PFX "timeout value must be 0<timeout<18000, using %d\n",
-			timeout);
+		printk(KERN_INFO PFX
+		     "timeout value must be 0 < timeout < 18000, using %d\n",
+							timeout);
 	}
 
 	/* Calculate the watchdog's timeout */
@@ -415,15 +409,16 @@ static int __init watchdog_init(void)
 
 	ret = register_reboot_notifier(&ali_notifier);
 	if (ret != 0) {
-		printk(KERN_ERR PFX "cannot register reboot notifier (err=%d)\n",
-			ret);
+		printk(KERN_ERR PFX
+			"cannot register reboot notifier (err=%d)\n", ret);
 		goto out;
 	}
 
 	ret = misc_register(&ali_miscdev);
 	if (ret != 0) {
-		printk(KERN_ERR PFX "cannot register miscdev on minor=%d (err=%d)\n",
-			WATCHDOG_MINOR, ret);
+		printk(KERN_ERR PFX
+			"cannot register miscdev on minor=%d (err=%d)\n",
+						WATCHDOG_MINOR, ret);
 		goto unreg_reboot;
 	}
 
diff --git a/drivers/watchdog/alim7101_wdt.c b/drivers/watchdog/alim7101_wdt.c
index 238273c98656..a045ef869439 100644
--- a/drivers/watchdog/alim7101_wdt.c
+++ b/drivers/watchdog/alim7101_wdt.c
@@ -31,9 +31,9 @@
 #include <linux/init.h>
 #include <linux/fs.h>
 #include <linux/pci.h>
+#include <linux/io.h>
+#include <linux/uaccess.h>
 
-#include <asm/io.h>
-#include <asm/uaccess.h>
 #include <asm/system.h>
 
 #define OUR_NAME "alim7101_wdt"
@@ -60,13 +60,17 @@
  */
 
 #define WATCHDOG_TIMEOUT 30            /* 30 sec default timeout */
-static int timeout = WATCHDOG_TIMEOUT; /* in seconds, will be multiplied by HZ to get seconds to wait for a ping */
+/* in seconds, will be multiplied by HZ to get seconds to wait for a ping */
+static int timeout = WATCHDOG_TIMEOUT;
 module_param(timeout, int, 0);
-MODULE_PARM_DESC(timeout, "Watchdog timeout in seconds. (1<=timeout<=3600, default=" __MODULE_STRING(WATCHDOG_TIMEOUT) ")");
+MODULE_PARM_DESC(timeout,
+		"Watchdog timeout in seconds. (1<=timeout<=3600, default="
+				__MODULE_STRING(WATCHDOG_TIMEOUT) ")");
 
-static int use_gpio = 0; /* Use the pic (for a1d revision alim7101) */
+static int use_gpio; /* Use the pic (for a1d revision alim7101) */
 module_param(use_gpio, int, 0);
-MODULE_PARM_DESC(use_gpio, "Use the gpio watchdog.  (required by old cobalt boards)");
+MODULE_PARM_DESC(use_gpio,
+		"Use the gpio watchdog (required by old cobalt boards).");
 
 static void wdt_timer_ping(unsigned long);
 static DEFINE_TIMER(timer, wdt_timer_ping, 0, 1);
@@ -77,8 +81,9 @@ static struct pci_dev *alim7101_pmu;
 
 static int nowayout = WATCHDOG_NOWAYOUT;
 module_param(nowayout, int, 0);
-MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default="
-		 __MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
+MODULE_PARM_DESC(nowayout,
+		"Watchdog cannot be stopped once started (default="
+				__MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
 
 /*
  *	Whack the dog
@@ -89,23 +94,26 @@ static void wdt_timer_ping(unsigned long data)
 	/* If we got a heartbeat pulse within the WDT_US_INTERVAL
 	 * we agree to ping the WDT
 	 */
-	char	tmp;
+	char tmp;
 
-	if(time_before(jiffies, next_heartbeat))
-	{
+	if (time_before(jiffies, next_heartbeat)) {
 		/* Ping the WDT (this is actually a disarm/arm sequence) */
 		pci_read_config_byte(alim7101_pmu, 0x92, &tmp);
-		pci_write_config_byte(alim7101_pmu, ALI_7101_WDT, (tmp & ~ALI_WDT_ARM));
-		pci_write_config_byte(alim7101_pmu, ALI_7101_WDT, (tmp | ALI_WDT_ARM));
+		pci_write_config_byte(alim7101_pmu,
+					ALI_7101_WDT, (tmp & ~ALI_WDT_ARM));
+		pci_write_config_byte(alim7101_pmu,
+					ALI_7101_WDT, (tmp | ALI_WDT_ARM));
 		if (use_gpio) {
-			pci_read_config_byte(alim7101_pmu, ALI_7101_GPIO_O, &tmp);
-			pci_write_config_byte(alim7101_pmu, ALI_7101_GPIO_O, tmp
-					| 0x20);
-			pci_write_config_byte(alim7101_pmu, ALI_7101_GPIO_O, tmp
-					& ~0x20);
+			pci_read_config_byte(alim7101_pmu,
+					ALI_7101_GPIO_O, &tmp);
+			pci_write_config_byte(alim7101_pmu,
+					ALI_7101_GPIO_O, tmp | 0x20);
+			pci_write_config_byte(alim7101_pmu,
+					ALI_7101_GPIO_O, tmp & ~0x20);
 		}
 	} else {
-		printk(KERN_WARNING PFX "Heartbeat lost! Will not ping the watchdog\n");
+		printk(KERN_WARNING PFX
+			"Heartbeat lost! Will not ping the watchdog\n");
 	}
 	/* Re-set the timer interval */
 	mod_timer(&timer, jiffies + WDT_INTERVAL);
@@ -117,21 +125,27 @@ static void wdt_timer_ping(unsigned long data)
 
 static void wdt_change(int writeval)
 {
-	char	tmp;
+	char tmp;
 
 	pci_read_config_byte(alim7101_pmu, ALI_7101_WDT, &tmp);
 	if (writeval == WDT_ENABLE) {
-		pci_write_config_byte(alim7101_pmu, ALI_7101_WDT, (tmp | ALI_WDT_ARM));
+		pci_write_config_byte(alim7101_pmu,
+					ALI_7101_WDT, (tmp | ALI_WDT_ARM));
 		if (use_gpio) {
-			pci_read_config_byte(alim7101_pmu, ALI_7101_GPIO_O, &tmp);
-			pci_write_config_byte(alim7101_pmu, ALI_7101_GPIO_O, tmp & ~0x20);
+			pci_read_config_byte(alim7101_pmu,
+					ALI_7101_GPIO_O, &tmp);
+			pci_write_config_byte(alim7101_pmu,
+					ALI_7101_GPIO_O, tmp & ~0x20);
 		}
 
 	} else {
-		pci_write_config_byte(alim7101_pmu, ALI_7101_WDT, (tmp & ~ALI_WDT_ARM));
+		pci_write_config_byte(alim7101_pmu,
+					ALI_7101_WDT, (tmp & ~ALI_WDT_ARM));
 		if (use_gpio) {
-			pci_read_config_byte(alim7101_pmu, ALI_7101_GPIO_O, &tmp);
-			pci_write_config_byte(alim7101_pmu, ALI_7101_GPIO_O, tmp | 0x20);
+			pci_read_config_byte(alim7101_pmu,
+					ALI_7101_GPIO_O, &tmp);
+			pci_write_config_byte(alim7101_pmu,
+					ALI_7101_GPIO_O, tmp | 0x20);
 		}
 	}
 }
@@ -169,10 +183,11 @@ static void wdt_keepalive(void)
  * /dev/watchdog handling
  */
 
-static ssize_t fop_write(struct file * file, const char __user * buf, size_t count, loff_t * ppos)
+static ssize_t fop_write(struct file *file, const char __user *buf,
+						size_t count, loff_t *ppos)
 {
 	/* See if we got the magic character 'V' and reload the timer */
-	if(count) {
+	if (count) {
 		if (!nowayout) {
 			size_t ofs;
 
@@ -183,7 +198,7 @@ static ssize_t fop_write(struct file * file, const char __user * buf, size_t cou
 			/* now scan */
 			for (ofs = 0; ofs != count; ofs++) {
 				char c;
-				if (get_user(c, buf+ofs))
+				if (get_user(c, buf + ofs))
 					return -EFAULT;
 				if (c == 'V')
 					wdt_expect_close = 42;
@@ -195,119 +210,116 @@ static ssize_t fop_write(struct file * file, const char __user * buf, size_t cou
 	return count;
 }
 
-static int fop_open(struct inode * inode, struct file * file)
+static int fop_open(struct inode *inode, struct file *file)
 {
 	/* Just in case we're already talking to someone... */
-	if(test_and_set_bit(0, &wdt_is_open))
+	if (test_and_set_bit(0, &wdt_is_open))
 		return -EBUSY;
 	/* Good, fire up the show */
 	wdt_startup();
 	return nonseekable_open(inode, file);
 }
 
-static int fop_close(struct inode * inode, struct file * file)
+static int fop_close(struct inode *inode, struct file *file)
 {
-	if(wdt_expect_close == 42)
+	if (wdt_expect_close == 42)
 		wdt_turnoff();
 	else {
 		/* wim: shouldn't there be a: del_timer(&timer); */
-		printk(KERN_CRIT PFX "device file closed unexpectedly. Will not stop the WDT!\n");
+		printk(KERN_CRIT PFX
+		  "device file closed unexpectedly. Will not stop the WDT!\n");
 	}
 	clear_bit(0, &wdt_is_open);
 	wdt_expect_close = 0;
 	return 0;
 }
 
-static int fop_ioctl(struct inode *inode, struct file *file, unsigned int cmd, unsigned long arg)
+static long fop_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
 {
 	void __user *argp = (void __user *)arg;
 	int __user *p = argp;
-	static struct watchdog_info ident =
-	{
-		.options = WDIOF_KEEPALIVEPING | WDIOF_SETTIMEOUT | WDIOF_MAGICCLOSE,
+	static struct watchdog_info ident = {
+		.options = WDIOF_KEEPALIVEPING | WDIOF_SETTIMEOUT
+							| WDIOF_MAGICCLOSE,
 		.firmware_version = 1,
 		.identity = "ALiM7101",
 	};
 
-	switch(cmd)
+	switch (cmd) {
+	case WDIOC_GETSUPPORT:
+		return copy_to_user(argp, &ident, sizeof(ident)) ? -EFAULT : 0;
+	case WDIOC_GETSTATUS:
+	case WDIOC_GETBOOTSTATUS:
+		return put_user(0, p);
+	case WDIOC_SETOPTIONS:
 	{
-		case WDIOC_GETSUPPORT:
-			return copy_to_user(argp, &ident, sizeof(ident))?-EFAULT:0;
-		case WDIOC_GETSTATUS:
-		case WDIOC_GETBOOTSTATUS:
-			return put_user(0, p);
-		case WDIOC_KEEPALIVE:
-			wdt_keepalive();
-			return 0;
-		case WDIOC_SETOPTIONS:
-		{
-			int new_options, retval = -EINVAL;
-
-			if(get_user(new_options, p))
-				return -EFAULT;
-
-			if(new_options & WDIOS_DISABLECARD) {
-				wdt_turnoff();
-				retval = 0;
-			}
+		int new_options, retval = -EINVAL;
 
-			if(new_options & WDIOS_ENABLECARD) {
-				wdt_startup();
-				retval = 0;
-			}
-
-			return retval;
+		if (get_user(new_options, p))
+			return -EFAULT;
+		if (new_options & WDIOS_DISABLECARD) {
+			wdt_turnoff();
+			retval = 0;
 		}
-		case WDIOC_SETTIMEOUT:
-		{
-			int new_timeout;
-
-			if(get_user(new_timeout, p))
-				return -EFAULT;
-
-			if(new_timeout < 1 || new_timeout > 3600) /* arbitrary upper limit */
-				return -EINVAL;
-
-			timeout = new_timeout;
-			wdt_keepalive();
-			/* Fall through */
+		if (new_options & WDIOS_ENABLECARD) {
+			wdt_startup();
+			retval = 0;
 		}
-		case WDIOC_GETTIMEOUT:
-			return put_user(timeout, p);
-		default:
-			return -ENOTTY;
+		return retval;
+	}
+	case WDIOC_KEEPALIVE:
+		wdt_keepalive();
+		return 0;
+	case WDIOC_SETTIMEOUT:
+	{
+		int new_timeout;
+
+		if (get_user(new_timeout, p))
+			return -EFAULT;
+		/* arbitrary upper limit */
+		if (new_timeout < 1 || new_timeout > 3600)
+			return -EINVAL;
+		timeout = new_timeout;
+		wdt_keepalive();
+		/* Fall through */
+	}
+	case WDIOC_GETTIMEOUT:
+		return put_user(timeout, p);
+	default:
+		return -ENOTTY;
 	}
 }
 
 static const struct file_operations wdt_fops = {
-	.owner=		THIS_MODULE,
-	.llseek=	no_llseek,
-	.write=		fop_write,
-	.open=		fop_open,
-	.release=	fop_close,
-	.ioctl=		fop_ioctl,
+	.owner		=	THIS_MODULE,
+	.llseek		=	no_llseek,
+	.write		=	fop_write,
+	.open		=	fop_open,
+	.release	=	fop_close,
+	.unlocked_ioctl	=	fop_ioctl,
 };
 
 static struct miscdevice wdt_miscdev = {
-	.minor=WATCHDOG_MINOR,
-	.name="watchdog",
-	.fops=&wdt_fops,
+	.minor	=	WATCHDOG_MINOR,
+	.name	=	"watchdog",
+	.fops	=	&wdt_fops,
 };
 
 /*
  *	Notifier for system down
  */
 
-static int wdt_notify_sys(struct notifier_block *this, unsigned long code, void *unused)
+static int wdt_notify_sys(struct notifier_block *this,
+					unsigned long code, void *unused)
 {
-	if (code==SYS_DOWN || code==SYS_HALT)
+	if (code == SYS_DOWN || code == SYS_HALT)
 		wdt_turnoff();
 
-	if (code==SYS_RESTART) {
+	if (code == SYS_RESTART) {
 		/*
-		 * Cobalt devices have no way of rebooting themselves other than
-		 * getting the watchdog to pull reset, so we restart the watchdog on
-		 * reboot with no heartbeat
+		 * Cobalt devices have no way of rebooting themselves other
+		 * than getting the watchdog to pull reset, so we restart the
+		 * watchdog on reboot with no heartbeat
 		 */
 		wdt_change(WDT_ENABLE);
 		printk(KERN_INFO PFX "Watchdog timer is now enabled with no heartbeat - should reboot in ~1 second.\n");
@@ -320,8 +332,7 @@ static int wdt_notify_sys(struct notifier_block *this, unsigned long code, void
  *	turn the timebomb registers off.
  */
 
-static struct notifier_block wdt_notifier=
-{
+static struct notifier_block wdt_notifier = {
 	.notifier_call = wdt_notify_sys,
 };
 
@@ -354,7 +365,8 @@ static int __init alim7101_wdt_init(void)
 	ali1543_south = pci_get_device(PCI_VENDOR_ID_AL, PCI_DEVICE_ID_AL_M1533,
 		NULL);
 	if (!ali1543_south) {
-		printk(KERN_INFO PFX "ALi 1543 South-Bridge not present - WDT not set\n");
+		printk(KERN_INFO PFX
+			"ALi 1543 South-Bridge not present - WDT not set\n");
 		goto err_out;
 	}
 	pci_read_config_byte(ali1543_south, 0x5e, &tmp);
@@ -363,24 +375,25 @@ static int __init alim7101_wdt_init(void)
 		if (!use_gpio) {
 			printk(KERN_INFO PFX "Detected old alim7101 revision 'a1d'.  If this is a cobalt board, set the 'use_gpio' module parameter.\n");
 			goto err_out;
-		} 
+		}
 		nowayout = 1;
 	} else if ((tmp & 0x1e) != 0x12 && (tmp & 0x1e) != 0x00) {
 		printk(KERN_INFO PFX "ALi 1543 South-Bridge does not have the correct revision number (???1001?) - WDT not set\n");
 		goto err_out;
 	}
 
-	if(timeout < 1 || timeout > 3600) /* arbitrary upper limit */
-	{
+	if (timeout < 1 || timeout > 3600) {
+		/* arbitrary upper limit */
 		timeout = WATCHDOG_TIMEOUT;
-		printk(KERN_INFO PFX "timeout value must be 1<=x<=3600, using %d\n",
-			timeout);
+		printk(KERN_INFO PFX
+			"timeout value must be 1 <= x <= 3600, using %d\n",
+								timeout);
 	}
 
 	rc = register_reboot_notifier(&wdt_notifier);
 	if (rc) {
-		printk(KERN_ERR PFX "cannot register reboot notifier (err=%d)\n",
-			rc);
+		printk(KERN_ERR PFX
+			"cannot register reboot notifier (err=%d)\n", rc);
 		goto err_out;
 	}
 
@@ -391,9 +404,8 @@ static int __init alim7101_wdt_init(void)
 		goto err_out_reboot;
 	}
 
-	if (nowayout) {
+	if (nowayout)
 		__module_get(THIS_MODULE);
-	}
 
 	printk(KERN_INFO PFX "WDT driver for ALi M7101 initialised. timeout=%d sec (nowayout=%d)\n",
 		timeout, nowayout);
diff --git a/drivers/watchdog/ar7_wdt.c b/drivers/watchdog/ar7_wdt.c
index 2eb48c0df32c..55dcbfe2bb72 100644
--- a/drivers/watchdog/ar7_wdt.c
+++ b/drivers/watchdog/ar7_wdt.c
@@ -69,7 +69,8 @@ struct ar7_wdt {
 	u32 prescale;
 };
 
-static struct semaphore open_semaphore;
+static unsigned long wdt_is_open;
+static spinlock_t wdt_lock;
 static unsigned expect_close;
 
 /* XXX currently fixed, allows max margin ~68.72 secs */
@@ -154,8 +155,10 @@ static void ar7_wdt_update_margin(int new_margin)
 	u32 change;
 
 	change = new_margin * (ar7_vbus_freq() / prescale_value);
-	if (change < 1) change = 1;
-	if (change > 0xffff) change = 0xffff;
+	if (change < 1)
+		change = 1;
+	if (change > 0xffff)
+		change = 0xffff;
 	ar7_wdt_change(change);
 	margin = change * prescale_value / ar7_vbus_freq();
 	printk(KERN_INFO DRVNAME
@@ -179,7 +182,7 @@ static void ar7_wdt_disable_wdt(void)
 static int ar7_wdt_open(struct inode *inode, struct file *file)
 {
 	/* only allow one at a time */
-	if (down_trylock(&open_semaphore))
+	if (test_and_set_bit(0, &wdt_is_open))
 		return -EBUSY;
 	ar7_wdt_enable_wdt();
 	expect_close = 0;
@@ -195,9 +198,7 @@ static int ar7_wdt_release(struct inode *inode, struct file *file)
 		"will not disable the watchdog timer\n");
 	else if (!nowayout)
 		ar7_wdt_disable_wdt();
-
-	up(&open_semaphore);
-
+	clear_bit(0, &wdt_is_open);
 	return 0;
 }
 
@@ -212,7 +213,7 @@ static int ar7_wdt_notify_sys(struct notifier_block *this,
 }
 
 static struct notifier_block ar7_wdt_notifier = {
-	.notifier_call = ar7_wdt_notify_sys
+	.notifier_call = ar7_wdt_notify_sys,
 };
 
 static ssize_t ar7_wdt_write(struct file *file, const char *data,
@@ -222,12 +223,14 @@ static ssize_t ar7_wdt_write(struct file *file, const char *data,
 	if (len) {
 		size_t i;
 
+		spin_lock(&wdt_lock);
 		ar7_wdt_kick(1);
+		spin_unlock(&wdt_lock);
 
 		expect_close = 0;
 		for (i = 0; i < len; ++i) {
 			char c;
-			if (get_user(c, data+i))
+			if (get_user(c, data + i))
 				return -EFAULT;
 			if (c == 'V')
 				expect_close = 1;
@@ -237,8 +240,8 @@ static ssize_t ar7_wdt_write(struct file *file, const char *data,
 	return len;
 }
 
-static int ar7_wdt_ioctl(struct inode *inode, struct file *file,
-			 unsigned int cmd, unsigned long arg)
+static long ar7_wdt_ioctl(struct file *file,
+					unsigned int cmd, unsigned long arg)
 {
 	static struct watchdog_info ident = {
 		.identity = LONGNAME,
@@ -248,8 +251,6 @@ static int ar7_wdt_ioctl(struct inode *inode, struct file *file,
 	int new_margin;
 
 	switch (cmd) {
-	default:
-		return -ENOTTY;
 	case WDIOC_GETSUPPORT:
 		if (copy_to_user((struct watchdog_info *)arg, &ident,
 				sizeof(ident)))
@@ -269,20 +270,24 @@ static int ar7_wdt_ioctl(struct inode *inode, struct file *file,
 		if (new_margin < 1)
 			return -EINVAL;
 
+		spin_lock(&wdt_lock);
 		ar7_wdt_update_margin(new_margin);
 		ar7_wdt_kick(1);
+		spin_unlock(&wdt_lock);
 
 	case WDIOC_GETTIMEOUT:
 		if (put_user(margin, (int *)arg))
 			return -EFAULT;
 		return 0;
+	default:
+		return -ENOTTY;
 	}
 }
 
 static const struct file_operations ar7_wdt_fops = {
 	.owner		= THIS_MODULE,
 	.write		= ar7_wdt_write,
-	.ioctl		= ar7_wdt_ioctl,
+	.unlocked_ioctl	= ar7_wdt_ioctl,
 	.open		= ar7_wdt_open,
 	.release	= ar7_wdt_release,
 };
@@ -297,6 +302,8 @@ static int __init ar7_wdt_init(void)
 {
 	int rc;
 
+	spin_lock_init(&wdt_lock);
+
 	ar7_wdt_get_regs();
 
 	if (!request_mem_region(ar7_regs_wdt, sizeof(struct ar7_wdt),
@@ -312,8 +319,6 @@ static int __init ar7_wdt_init(void)
 	ar7_wdt_prescale(prescale_value);
 	ar7_wdt_update_margin(margin);
 
-	sema_init(&open_semaphore, 1);
-
 	rc = register_reboot_notifier(&ar7_wdt_notifier);
 	if (rc) {
 		printk(KERN_ERR DRVNAME
diff --git a/drivers/watchdog/at32ap700x_wdt.c b/drivers/watchdog/at32ap700x_wdt.c
index ae0fca5e8749..e8ae638e5804 100644
--- a/drivers/watchdog/at32ap700x_wdt.c
+++ b/drivers/watchdog/at32ap700x_wdt.c
@@ -212,8 +212,8 @@ static struct watchdog_info at32_wdt_info = {
 /*
  * Handle commands from user-space.
  */
-static int at32_wdt_ioctl(struct inode *inode, struct file *file,
-		unsigned int cmd, unsigned long arg)
+static long at32_wdt_ioctl(struct file *file,
+				unsigned int cmd, unsigned long arg)
 {
 	int ret = -ENOTTY;
 	int time;
@@ -221,27 +221,10 @@ static int at32_wdt_ioctl(struct inode *inode, struct file *file,
 	int __user *p = argp;
 
 	switch (cmd) {
-	case WDIOC_KEEPALIVE:
-		at32_wdt_pat();
-		ret = 0;
-		break;
 	case WDIOC_GETSUPPORT:
 		ret = copy_to_user(argp, &at32_wdt_info,
 				sizeof(at32_wdt_info)) ? -EFAULT : 0;
 		break;
-	case WDIOC_SETTIMEOUT:
-		ret = get_user(time, p);
-		if (ret)
-			break;
-		ret = at32_wdt_settimeout(time);
-		if (ret)
-			break;
-		/* Enable new time value */
-		at32_wdt_start();
-		/* fall through */
-	case WDIOC_GETTIMEOUT:
-		ret = put_user(wdt->timeout, p);
-		break;
 	case WDIOC_GETSTATUS:
 		ret = put_user(0, p);
 		break;
@@ -258,6 +241,23 @@ static int at32_wdt_ioctl(struct inode *inode, struct file *file,
 			at32_wdt_start();
 		ret = 0;
 		break;
+	case WDIOC_KEEPALIVE:
+		at32_wdt_pat();
+		ret = 0;
+		break;
+	case WDIOC_SETTIMEOUT:
+		ret = get_user(time, p);
+		if (ret)
+			break;
+		ret = at32_wdt_settimeout(time);
+		if (ret)
+			break;
+		/* Enable new time value */
+		at32_wdt_start();
+		/* fall through */
+	case WDIOC_GETTIMEOUT:
+		ret = put_user(wdt->timeout, p);
+		break;
 	}
 
 	return ret;
@@ -283,7 +283,7 @@ static ssize_t at32_wdt_write(struct file *file, const char __user *data,
 			 */
 			for (i = 0; i != len; i++) {
 				char c;
-				if (get_user(c, data+i))
+				if (get_user(c, data + i))
 					return -EFAULT;
 				if (c == 'V')
 					expect_release = 42;
@@ -298,7 +298,7 @@ static ssize_t at32_wdt_write(struct file *file, const char __user *data,
 static const struct file_operations at32_wdt_fops = {
 	.owner		= THIS_MODULE,
 	.llseek		= no_llseek,
-	.ioctl		= at32_wdt_ioctl,
+	.unlocked_ioctl	= at32_wdt_ioctl,
 	.open		= at32_wdt_open,
 	.release	= at32_wdt_close,
 	.write		= at32_wdt_write,
@@ -391,7 +391,6 @@ static int __exit at32_wdt_remove(struct platform_device *pdev)
 		wdt = NULL;
 		platform_set_drvdata(pdev, NULL);
 	}
-
 	return 0;
 }
 
diff --git a/drivers/watchdog/at91rm9200_wdt.c b/drivers/watchdog/at91rm9200_wdt.c
index 9ff9a9565320..993e5f52afef 100644
--- a/drivers/watchdog/at91rm9200_wdt.c
+++ b/drivers/watchdog/at91rm9200_wdt.c
@@ -20,9 +20,8 @@
 #include <linux/platform_device.h>
 #include <linux/types.h>
 #include <linux/watchdog.h>
-#include <asm/uaccess.h>
-#include <asm/arch/at91_st.h>
-
+#include <linux/uaccess.h>
+#include <mach/at91_st.h>
 
 #define WDT_DEFAULT_TIME	5	/* seconds */
 #define WDT_MAX_TIME		256	/* seconds */
@@ -31,11 +30,14 @@ static int wdt_time = WDT_DEFAULT_TIME;
 static int nowayout = WATCHDOG_NOWAYOUT;
 
 module_param(wdt_time, int, 0);
-MODULE_PARM_DESC(wdt_time, "Watchdog time in seconds. (default="__MODULE_STRING(WDT_DEFAULT_TIME) ")");
+MODULE_PARM_DESC(wdt_time, "Watchdog time in seconds. (default="
+				__MODULE_STRING(WDT_DEFAULT_TIME) ")");
 
 #ifdef CONFIG_WATCHDOG_NOWAYOUT
 module_param(nowayout, int, 0);
-MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=" __MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
+MODULE_PARM_DESC(nowayout,
+		"Watchdog cannot be stopped once started (default="
+				__MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
 #endif
 
 
@@ -46,7 +48,7 @@ static unsigned long at91wdt_busy;
 /*
  * Disable the watchdog.
  */
-static void inline at91_wdt_stop(void)
+static inline void at91_wdt_stop(void)
 {
 	at91_sys_write(AT91_ST_WDMR, AT91_ST_EXTEN);
 }
@@ -54,16 +56,17 @@ static void inline at91_wdt_stop(void)
 /*
  * Enable and reset the watchdog.
  */
-static void inline at91_wdt_start(void)
+static inline void at91_wdt_start(void)
 {
-	at91_sys_write(AT91_ST_WDMR, AT91_ST_EXTEN | AT91_ST_RSTEN | (((65536 * wdt_time) >> 8) & AT91_ST_WDV));
+	at91_sys_write(AT91_ST_WDMR, AT91_ST_EXTEN | AT91_ST_RSTEN |
+				(((65536 * wdt_time) >> 8) & AT91_ST_WDV));
 	at91_sys_write(AT91_ST_CR, AT91_ST_WDRST);
 }
 
 /*
  * Reload the watchdog timer.  (ie, pat the watchdog)
  */
-static void inline at91_wdt_reload(void)
+static inline void at91_wdt_reload(void)
 {
 	at91_sys_write(AT91_ST_CR, AT91_ST_WDRST);
 }
@@ -89,8 +92,9 @@ static int at91_wdt_open(struct inode *inode, struct file *file)
  */
 static int at91_wdt_close(struct inode *inode, struct file *file)
 {
+	/* Disable the watchdog when file is closed */
 	if (!nowayout)
-		at91_wdt_stop();	/* Disable the watchdog when file is closed */
+		at91_wdt_stop();
 
 	clear_bit(0, &at91wdt_busy);
 	return 0;
@@ -110,7 +114,8 @@ static int at91_wdt_settimeout(int new_time)
 	if ((new_time <= 0) || (new_time > WDT_MAX_TIME))
 		return -EINVAL;
 
-	/* Set new watchdog time. It will be used when at91_wdt_start() is called. */
+	/* Set new watchdog time. It will be used when
+	   at91_wdt_start() is called. */
 	wdt_time = new_time;
 	return 0;
 }
@@ -123,60 +128,52 @@ static struct watchdog_info at91_wdt_info = {
 /*
  * Handle commands from user-space.
  */
-static int at91_wdt_ioctl(struct inode *inode, struct file *file,
-		unsigned int cmd, unsigned long arg)
+static long at91_wdt_ioctl(struct file *file,
+					unsigned int cmd, unsigned long arg)
 {
 	void __user *argp = (void __user *)arg;
 	int __user *p = argp;
 	int new_value;
 
-	switch(cmd) {
-		case WDIOC_KEEPALIVE:
-			at91_wdt_reload();	/* pat the watchdog */
-			return 0;
-
-		case WDIOC_GETSUPPORT:
-			return copy_to_user(argp, &at91_wdt_info, sizeof(at91_wdt_info)) ? -EFAULT : 0;
-
-		case WDIOC_SETTIMEOUT:
-			if (get_user(new_value, p))
-				return -EFAULT;
-
-			if (at91_wdt_settimeout(new_value))
-				return -EINVAL;
-
-			/* Enable new time value */
+	switch (cmd) {
+	case WDIOC_GETSUPPORT:
+		return copy_to_user(argp, &at91_wdt_info,
+				sizeof(at91_wdt_info)) ? -EFAULT : 0;
+	case WDIOC_GETSTATUS:
+	case WDIOC_GETBOOTSTATUS:
+		return put_user(0, p);
+	case WDIOC_SETOPTIONS:
+		if (get_user(new_value, p))
+			return -EFAULT;
+		if (new_value & WDIOS_DISABLECARD)
+			at91_wdt_stop();
+		if (new_value & WDIOS_ENABLECARD)
 			at91_wdt_start();
-
-			/* Return current value */
-			return put_user(wdt_time, p);
-
-		case WDIOC_GETTIMEOUT:
-			return put_user(wdt_time, p);
-
-		case WDIOC_GETSTATUS:
-		case WDIOC_GETBOOTSTATUS:
-			return put_user(0, p);
-
-		case WDIOC_SETOPTIONS:
-			if (get_user(new_value, p))
-				return -EFAULT;
-
-			if (new_value & WDIOS_DISABLECARD)
-				at91_wdt_stop();
-			if (new_value & WDIOS_ENABLECARD)
-				at91_wdt_start();
-			return 0;
-
-		default:
-			return -ENOTTY;
+		return 0;
+	case WDIOC_KEEPALIVE:
+		at91_wdt_reload();	/* pat the watchdog */
+		return 0;
+	case WDIOC_SETTIMEOUT:
+		if (get_user(new_value, p))
+			return -EFAULT;
+		if (at91_wdt_settimeout(new_value))
+			return -EINVAL;
+		/* Enable new time value */
+		at91_wdt_start();
+		/* Return current value */
+		return put_user(wdt_time, p);
+	case WDIOC_GETTIMEOUT:
+		return put_user(wdt_time, p);
+	default:
+		return -ENOTTY;
 	}
 }
 
 /*
  * Pat the watchdog whenever device is written to.
  */
-static ssize_t at91_wdt_write(struct file *file, const char *data, size_t len, loff_t *ppos)
+static ssize_t at91_wdt_write(struct file *file, const char *data,
+						size_t len, loff_t *ppos)
 {
 	at91_wdt_reload();		/* pat the watchdog */
 	return len;
@@ -187,7 +184,7 @@ static ssize_t at91_wdt_write(struct file *file, const char *data, size_t len, l
 static const struct file_operations at91wdt_fops = {
 	.owner		= THIS_MODULE,
 	.llseek		= no_llseek,
-	.ioctl		= at91_wdt_ioctl,
+	.unlocked_ioctl	= at91_wdt_ioctl,
 	.open		= at91_wdt_open,
 	.release	= at91_wdt_close,
 	.write		= at91_wdt_write,
@@ -211,7 +208,8 @@ static int __init at91wdt_probe(struct platform_device *pdev)
 	if (res)
 		return res;
 
-	printk("AT91 Watchdog Timer enabled (%d seconds%s)\n", wdt_time, nowayout ? ", nowayout" : "");
+	printk(KERN_INFO "AT91 Watchdog Timer enabled (%d seconds%s)\n",
+				wdt_time, nowayout ? ", nowayout" : "");
 	return 0;
 }
 
@@ -243,7 +241,7 @@ static int at91wdt_resume(struct platform_device *pdev)
 {
 	if (at91wdt_busy)
 		at91_wdt_start();
-		return 0;
+	return 0;
 }
 
 #else
@@ -265,7 +263,8 @@ static struct platform_driver at91wdt_driver = {
 
 static int __init at91_wdt_init(void)
 {
-	/* Check that the heartbeat value is within range; if not reset to the default */
+	/* Check that the heartbeat value is within range;
+	   if not reset to the default */
 	if (at91_wdt_settimeout(wdt_time)) {
 		at91_wdt_settimeout(WDT_DEFAULT_TIME);
 		pr_info("at91_wdt: wdt_time value must be 1 <= wdt_time <= 256, using %d\n", wdt_time);
diff --git a/drivers/watchdog/bfin_wdt.c b/drivers/watchdog/bfin_wdt.c
index 03b3e3d91e7c..31b42253054e 100644
--- a/drivers/watchdog/bfin_wdt.c
+++ b/drivers/watchdog/bfin_wdt.c
@@ -24,8 +24,8 @@
 #include <linux/reboot.h>
 #include <linux/init.h>
 #include <linux/interrupt.h>
+#include <linux/uaccess.h>
 #include <asm/blackfin.h>
-#include <asm/uaccess.h>
 
 #define stamp(fmt, args...) pr_debug("%s:%i: " fmt "\n", __func__, __LINE__, ## args)
 #define stampit() stamp("here i am")
@@ -148,7 +148,8 @@ static int bfin_wdt_set_timeout(unsigned long t)
 		int run = bfin_wdt_running();
 		bfin_wdt_stop();
 		bfin_write_WDOG_CNT(cnt);
-		if (run) bfin_wdt_start();
+		if (run)
+			bfin_wdt_start();
 	}
 	spin_unlock_irqrestore(&bfin_wdt_spinlock, flags);
 
@@ -191,16 +192,15 @@ static int bfin_wdt_release(struct inode *inode, struct file *file)
 {
 	stampit();
 
-	if (expect_close == 42) {
+	if (expect_close == 42)
 		bfin_wdt_stop();
-	} else {
-		printk(KERN_CRIT PFX "Unexpected close, not stopping watchdog!\n");
+	else {
+		printk(KERN_CRIT PFX
+			"Unexpected close, not stopping watchdog!\n");
 		bfin_wdt_keepalive();
 	}
-
 	expect_close = 0;
 	clear_bit(0, &open_check);
-
 	return 0;
 }
 
@@ -214,7 +214,7 @@ static int bfin_wdt_release(struct inode *inode, struct file *file)
  *	Pings the watchdog on write.
  */
 static ssize_t bfin_wdt_write(struct file *file, const char __user *data,
-                              size_t len, loff_t *ppos)
+						size_t len, loff_t *ppos)
 {
 	stampit();
 
@@ -241,7 +241,6 @@ static ssize_t bfin_wdt_write(struct file *file, const char __user *data,
 
 /**
  *	bfin_wdt_ioctl - Query Device
- *	@inode: inode of device
  *	@file: file handle of device
  *	@cmd: watchdog command
  *	@arg: argument
@@ -249,8 +248,8 @@ static ssize_t bfin_wdt_write(struct file *file, const char __user *data,
  *	Query basic information from the device or ping it, as outlined by the
  *	watchdog API.
  */
-static int bfin_wdt_ioctl(struct inode *inode, struct file *file,
-                          unsigned int cmd, unsigned long arg)
+static long bfin_wdt_ioctl(struct file *file,
+				unsigned int cmd, unsigned long arg)
 {
 	void __user *argp = (void __user *)arg;
 	int __user *p = argp;
@@ -258,59 +257,49 @@ static int bfin_wdt_ioctl(struct inode *inode, struct file *file,
 	stampit();
 
 	switch (cmd) {
-		default:
-			return -ENOTTY;
-
-		case WDIOC_GETSUPPORT:
-			if (copy_to_user(argp, &bfin_wdt_info, sizeof(bfin_wdt_info)))
-				return -EFAULT;
-			else
-				return 0;
-
-		case WDIOC_GETSTATUS:
-		case WDIOC_GETBOOTSTATUS:
-			return put_user(!!(_bfin_swrst & SWRST_RESET_WDOG), p);
-
-		case WDIOC_KEEPALIVE:
-			bfin_wdt_keepalive();
+	case WDIOC_GETSUPPORT:
+		if (copy_to_user(argp, &bfin_wdt_info, sizeof(bfin_wdt_info)))
+			return -EFAULT;
+		else
 			return 0;
-
-		case WDIOC_SETTIMEOUT: {
-			int new_timeout;
-
-			if (get_user(new_timeout, p))
-				return -EFAULT;
-
-			if (bfin_wdt_set_timeout(new_timeout))
-				return -EINVAL;
+	case WDIOC_GETSTATUS:
+	case WDIOC_GETBOOTSTATUS:
+		return put_user(!!(_bfin_swrst & SWRST_RESET_WDOG), p);
+	case WDIOC_SETOPTIONS: {
+		unsigned long flags;
+		int options, ret = -EINVAL;
+
+		if (get_user(options, p))
+			return -EFAULT;
+
+		spin_lock_irqsave(&bfin_wdt_spinlock, flags);
+		if (options & WDIOS_DISABLECARD) {
+			bfin_wdt_stop();
+			ret = 0;
 		}
-			/* Fall */
-		case WDIOC_GETTIMEOUT:
-			return put_user(timeout, p);
-
-		case WDIOC_SETOPTIONS: {
-			unsigned long flags;
-			int options, ret = -EINVAL;
-
-			if (get_user(options, p))
-				return -EFAULT;
-
-			spin_lock_irqsave(&bfin_wdt_spinlock, flags);
-
-			if (options & WDIOS_DISABLECARD) {
-				bfin_wdt_stop();
-				ret = 0;
-			}
-
-			if (options & WDIOS_ENABLECARD) {
-				bfin_wdt_start();
-				ret = 0;
-			}
-
-			spin_unlock_irqrestore(&bfin_wdt_spinlock, flags);
-
-			return ret;
+		if (options & WDIOS_ENABLECARD) {
+			bfin_wdt_start();
+			ret = 0;
 		}
+		spin_unlock_irqrestore(&bfin_wdt_spinlock, flags);
+		return ret;
+	}
+	case WDIOC_KEEPALIVE:
+		bfin_wdt_keepalive();
+		return 0;
+	case WDIOC_SETTIMEOUT: {
+		int new_timeout;
+
+		if (get_user(new_timeout, p))
+			return -EFAULT;
+		if (bfin_wdt_set_timeout(new_timeout))
+			return -EINVAL;
+	}
+	/* Fall */
+	case WDIOC_GETTIMEOUT:
+		return put_user(timeout, p);
+	default:
+		return -ENOTTY;
 	}
 }
 
@@ -323,8 +312,8 @@ static int bfin_wdt_ioctl(struct inode *inode, struct file *file,
  *	Handles specific events, such as turning off the watchdog during a
  *	shutdown event.
  */
-static int bfin_wdt_notify_sys(struct notifier_block *this, unsigned long code,
-                               void *unused)
+static int bfin_wdt_notify_sys(struct notifier_block *this,
+					unsigned long code, void *unused)
 {
 	stampit();
 
@@ -379,12 +368,12 @@ static int bfin_wdt_resume(struct platform_device *pdev)
 #endif
 
 static const struct file_operations bfin_wdt_fops = {
-	.owner    = THIS_MODULE,
-	.llseek   = no_llseek,
-	.write    = bfin_wdt_write,
-	.ioctl    = bfin_wdt_ioctl,
-	.open     = bfin_wdt_open,
-	.release  = bfin_wdt_release,
+	.owner		= THIS_MODULE,
+	.llseek		= no_llseek,
+	.write    	= bfin_wdt_write,
+	.unlocked_ioctl	= bfin_wdt_ioctl,
+	.open		= bfin_wdt_open,
+	.release	= bfin_wdt_release,
 };
 
 static struct miscdevice bfin_wdt_miscdev = {
@@ -396,8 +385,8 @@ static struct miscdevice bfin_wdt_miscdev = {
 static struct watchdog_info bfin_wdt_info = {
 	.identity = "Blackfin Watchdog",
 	.options  = WDIOF_SETTIMEOUT |
-	            WDIOF_KEEPALIVEPING |
-	            WDIOF_MAGICCLOSE,
+		    WDIOF_KEEPALIVEPING |
+		    WDIOF_MAGICCLOSE,
 };
 
 static struct notifier_block bfin_wdt_notifier = {
@@ -416,14 +405,16 @@ static int __devinit bfin_wdt_probe(struct platform_device *pdev)
 
 	ret = register_reboot_notifier(&bfin_wdt_notifier);
 	if (ret) {
-		pr_devinit(KERN_ERR PFX "cannot register reboot notifier (err=%d)\n", ret);
+		pr_devinit(KERN_ERR PFX
+			"cannot register reboot notifier (err=%d)\n", ret);
 		return ret;
 	}
 
 	ret = misc_register(&bfin_wdt_miscdev);
 	if (ret) {
-		pr_devinit(KERN_ERR PFX "cannot register miscdev on minor=%d (err=%d)\n",
-		       WATCHDOG_MINOR, ret);
+		pr_devinit(KERN_ERR PFX
+			"cannot register miscdev on minor=%d (err=%d)\n",
+				WATCHDOG_MINOR, ret);
 		unregister_reboot_notifier(&bfin_wdt_notifier);
 		return ret;
 	}
@@ -516,7 +507,11 @@ MODULE_LICENSE("GPL");
 MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR);
 
 module_param(timeout, uint, 0);
-MODULE_PARM_DESC(timeout, "Watchdog timeout in seconds. (1<=timeout<=((2^32)/SCLK), default=" __MODULE_STRING(WATCHDOG_TIMEOUT) ")");
+MODULE_PARM_DESC(timeout,
+	"Watchdog timeout in seconds. (1<=timeout<=((2^32)/SCLK), default="
+		__MODULE_STRING(WATCHDOG_TIMEOUT) ")");
 
 module_param(nowayout, int, 0);
-MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=" __MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
+MODULE_PARM_DESC(nowayout,
+	"Watchdog cannot be stopped once started (default="
+		__MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
diff --git a/drivers/watchdog/booke_wdt.c b/drivers/watchdog/booke_wdt.c
index 770824458d45..c3b78a76f173 100644
--- a/drivers/watchdog/booke_wdt.c
+++ b/drivers/watchdog/booke_wdt.c
@@ -18,9 +18,9 @@
 #include <linux/miscdevice.h>
 #include <linux/notifier.h>
 #include <linux/watchdog.h>
+#include <linux/uaccess.h>
 
 #include <asm/reg_booke.h>
-#include <asm/uaccess.h>
 #include <asm/system.h>
 
 /* If the kernel parameter wdt=1, the watchdog will be enabled at boot.
@@ -32,7 +32,7 @@
  */
 
 #ifdef	CONFIG_FSL_BOOKE
-#define WDT_PERIOD_DEFAULT 63	/* Ex. wdt_period=28 bus=333Mhz , reset=~40sec */
+#define WDT_PERIOD_DEFAULT 63	/* Ex. wdt_period=28 bus=333Mhz,reset=~40sec */
 #else
 #define WDT_PERIOD_DEFAULT 3	/* Refer to the PPC40x and PPC4xx manuals */
 #endif				/* for timing information */
@@ -82,16 +82,15 @@ static struct watchdog_info ident = {
 	.identity = "PowerPC Book-E Watchdog",
 };
 
-static int booke_wdt_ioctl(struct inode *inode, struct file *file,
-			    unsigned int cmd, unsigned long arg)
+static long booke_wdt_ioctl(struct file *file,
+				unsigned int cmd, unsigned long arg)
 {
 	u32 tmp = 0;
 	u32 __user *p = (u32 __user *)arg;
 
 	switch (cmd) {
 	case WDIOC_GETSUPPORT:
-		if (copy_to_user((struct watchdog_info __user *)arg, &ident,
-				sizeof(struct watchdog_info)))
+		if (copy_to_user(arg, &ident, sizeof(struct watchdog_info)))
 			return -EFAULT;
 	case WDIOC_GETSTATUS:
 		return put_user(ident.options, p);
@@ -100,16 +99,6 @@ static int booke_wdt_ioctl(struct inode *inode, struct file *file,
 		tmp = mfspr(SPRN_TSR) & TSR_WRS(3);
 		/* returns 1 if last reset was caused by the WDT */
 		return (tmp ? 1 : 0);
-	case WDIOC_KEEPALIVE:
-		booke_wdt_ping();
-		return 0;
-	case WDIOC_SETTIMEOUT:
-		if (get_user(booke_wdt_period, p))
-			return -EFAULT;
-		mtspr(SPRN_TCR, (mfspr(SPRN_TCR)&~WDTP(0))|WDTP(booke_wdt_period));
-		return 0;
-	case WDIOC_GETTIMEOUT:
-		return put_user(booke_wdt_period, p);
 	case WDIOC_SETOPTIONS:
 		if (get_user(tmp, p))
 			return -EINVAL;
@@ -119,6 +108,17 @@ static int booke_wdt_ioctl(struct inode *inode, struct file *file,
 		} else
 			return -EINVAL;
 		return 0;
+	case WDIOC_KEEPALIVE:
+		booke_wdt_ping();
+		return 0;
+	case WDIOC_SETTIMEOUT:
+		if (get_user(booke_wdt_period, p))
+			return -EFAULT;
+		mtspr(SPRN_TCR, (mfspr(SPRN_TCR) & ~WDTP(0)) |
+						WDTP(booke_wdt_period));
+		return 0;
+	case WDIOC_GETTIMEOUT:
+		return put_user(booke_wdt_period, p);
 	default:
 		return -ENOTTY;
 	}
@@ -132,8 +132,9 @@ static int booke_wdt_open(struct inode *inode, struct file *file)
 	if (booke_wdt_enabled == 0) {
 		booke_wdt_enabled = 1;
 		on_each_cpu(__booke_wdt_enable, NULL, 0);
-		printk(KERN_INFO "PowerPC Book-E Watchdog Timer Enabled "
-				"(wdt_period=%d)\n", booke_wdt_period);
+		printk(KERN_INFO
+		      "PowerPC Book-E Watchdog Timer Enabled (wdt_period=%d)\n",
+				booke_wdt_period);
 	}
 	spin_unlock(&booke_wdt_lock);
 
@@ -144,7 +145,7 @@ static const struct file_operations booke_wdt_fops = {
 	.owner = THIS_MODULE,
 	.llseek = no_llseek,
 	.write = booke_wdt_write,
-	.ioctl = booke_wdt_ioctl,
+	.unlocked_ioctl = booke_wdt_ioctl,
 	.open = booke_wdt_open,
 };
 
@@ -175,8 +176,9 @@ static int __init booke_wdt_init(void)
 
 	spin_lock(&booke_wdt_lock);
 	if (booke_wdt_enabled == 1) {
-		printk(KERN_INFO "PowerPC Book-E Watchdog Timer Enabled "
-				"(wdt_period=%d)\n", booke_wdt_period);
+		printk(KERN_INFO
+		      "PowerPC Book-E Watchdog Timer Enabled (wdt_period=%d)\n",
+				booke_wdt_period);
 		on_each_cpu(__booke_wdt_enable, NULL, 0);
 	}
 	spin_unlock(&booke_wdt_lock);
diff --git a/drivers/watchdog/cpu5wdt.c b/drivers/watchdog/cpu5wdt.c
index df72f90123df..71f6d7eec9a8 100644
--- a/drivers/watchdog/cpu5wdt.c
+++ b/drivers/watchdog/cpu5wdt.c
@@ -30,16 +30,16 @@
 #include <linux/timer.h>
 #include <linux/completion.h>
 #include <linux/jiffies.h>
-#include <asm/io.h>
-#include <asm/uaccess.h>
-
+#include <linux/io.h>
+#include <linux/uaccess.h>
 #include <linux/watchdog.h>
 
 /* adjustable parameters */
 
-static int verbose = 0;
+static int verbose;
 static int port = 0x91;
 static int ticks = 10000;
+static spinlock_t cpu5wdt_lock;
 
 #define PFX			"cpu5wdt: "
 
@@ -70,12 +70,13 @@ static struct {
 
 static void cpu5wdt_trigger(unsigned long unused)
 {
-	if ( verbose > 2 )
+	if (verbose > 2)
 		printk(KERN_DEBUG PFX "trigger at %i ticks\n", ticks);
 
-	if( cpu5wdt_device.running )
+	if (cpu5wdt_device.running)
 		ticks--;
 
+	spin_lock(&cpu5wdt_lock);
 	/* keep watchdog alive */
 	outb(1, port + CPU5WDT_TRIGGER_REG);
 
@@ -86,6 +87,7 @@ static void cpu5wdt_trigger(unsigned long unused)
 		/* ticks doesn't matter anyway */
 		complete(&cpu5wdt_device.stop);
 	}
+	spin_unlock(&cpu5wdt_lock);
 
 }
 
@@ -93,14 +95,17 @@ static void cpu5wdt_reset(void)
 {
 	ticks = cpu5wdt_device.default_ticks;
 
-	if ( verbose )
+	if (verbose)
 		printk(KERN_DEBUG PFX "reset (%i ticks)\n", (int) ticks);
 
 }
 
 static void cpu5wdt_start(void)
 {
-	if ( !cpu5wdt_device.queue ) {
+	unsigned long flags;
+
+	spin_lock_irqsave(&cpu5wdt_lock, flags);
+	if (!cpu5wdt_device.queue) {
 		cpu5wdt_device.queue = 1;
 		outb(0, port + CPU5WDT_TIME_A_REG);
 		outb(0, port + CPU5WDT_TIME_B_REG);
@@ -111,18 +116,20 @@ static void cpu5wdt_start(void)
 	}
 	/* if process dies, counter is not decremented */
 	cpu5wdt_device.running++;
+	spin_unlock_irqrestore(&cpu5wdt_lock, flags);
 }
 
 static int cpu5wdt_stop(void)
 {
-	if ( cpu5wdt_device.running )
-		cpu5wdt_device.running = 0;
+	unsigned long flags;
 
+	spin_lock_irqsave(&cpu5wdt_lock, flags);
+	if (cpu5wdt_device.running)
+		cpu5wdt_device.running = 0;
 	ticks = cpu5wdt_device.default_ticks;
-
-	if ( verbose )
+	spin_unlock_irqrestore(&cpu5wdt_lock, flags);
+	if (verbose)
 		printk(KERN_CRIT PFX "stop not possible\n");
-
 	return -EIO;
 }
 
@@ -130,9 +137,8 @@ static int cpu5wdt_stop(void)
 
 static int cpu5wdt_open(struct inode *inode, struct file *file)
 {
-	if ( test_and_set_bit(0, &cpu5wdt_device.inuse) )
+	if (test_and_set_bit(0, &cpu5wdt_device.inuse))
 		return -EBUSY;
-
 	return nonseekable_open(inode, file);
 }
 
@@ -142,67 +148,58 @@ static int cpu5wdt_release(struct inode *inode, struct file *file)
 	return 0;
 }
 
-static int cpu5wdt_ioctl(struct inode *inode, struct file *file, unsigned int cmd, unsigned long arg)
+static long cpu5wdt_ioctl(struct file *file, unsigned int cmd,
+						unsigned long arg)
 {
 	void __user *argp = (void __user *)arg;
+	int __user *p = argp;
 	unsigned int value;
-	static struct watchdog_info ident =
-	{
+	static struct watchdog_info ident = {
 		.options = WDIOF_CARDRESET,
 		.identity = "CPU5 WDT",
 	};
 
-	switch(cmd) {
-		case WDIOC_KEEPALIVE:
-			cpu5wdt_reset();
-			break;
-		case WDIOC_GETSTATUS:
-			value = inb(port + CPU5WDT_STATUS_REG);
-			value = (value >> 2) & 1;
-			if ( copy_to_user(argp, &value, sizeof(int)) )
-				return -EFAULT;
-			break;
-		case WDIOC_GETBOOTSTATUS:
-			if ( copy_to_user(argp, &value, sizeof(int)) )
-				return -EFAULT;
-			break;
-		case WDIOC_GETSUPPORT:
-			if ( copy_to_user(argp, &ident, sizeof(ident)) )
-				return -EFAULT;
-			break;
-		case WDIOC_SETOPTIONS:
-			if ( copy_from_user(&value, argp, sizeof(int)) )
-				return -EFAULT;
-			switch(value) {
-				case WDIOS_ENABLECARD:
-					cpu5wdt_start();
-					break;
-				case WDIOS_DISABLECARD:
-					return cpu5wdt_stop();
-				default:
-					return -EINVAL;
-			}
-			break;
-		default:
-    			return -ENOTTY;
+	switch (cmd) {
+	case WDIOC_GETSUPPORT:
+		if (copy_to_user(argp, &ident, sizeof(ident)))
+			return -EFAULT;
+		break;
+	case WDIOC_GETSTATUS:
+		value = inb(port + CPU5WDT_STATUS_REG);
+		value = (value >> 2) & 1;
+		return put_user(value, p);
+	case WDIOC_GETBOOTSTATUS:
+		return put_user(0, p);
+	case WDIOC_SETOPTIONS:
+		if (get_user(value, p))
+			return -EFAULT;
+		if (value & WDIOS_ENABLECARD)
+			cpu5wdt_start();
+		if (value & WDIOS_DISABLECARD)
+			cpu5wdt_stop();
+		break;
+	case WDIOC_KEEPALIVE:
+		cpu5wdt_reset();
+		break;
+	default:
+		return -ENOTTY;
 	}
 	return 0;
 }
 
-static ssize_t cpu5wdt_write(struct file *file, const char __user *buf, size_t count, loff_t *ppos)
+static ssize_t cpu5wdt_write(struct file *file, const char __user *buf,
+						size_t count, loff_t *ppos)
 {
-	if ( !count )
+	if (!count)
 		return -EIO;
-
 	cpu5wdt_reset();
-
 	return count;
 }
 
 static const struct file_operations cpu5wdt_fops = {
 	.owner		= THIS_MODULE,
 	.llseek		= no_llseek,
-	.ioctl		= cpu5wdt_ioctl,
+	.unlocked_ioctl	= cpu5wdt_ioctl,
 	.open		= cpu5wdt_open,
 	.write		= cpu5wdt_write,
 	.release	= cpu5wdt_release,
@@ -221,37 +218,36 @@ static int __devinit cpu5wdt_init(void)
 	unsigned int val;
 	int err;
 
-	if ( verbose )
-		printk(KERN_DEBUG PFX "port=0x%x, verbose=%i\n", port, verbose);
+	if (verbose)
+		printk(KERN_DEBUG PFX
+				"port=0x%x, verbose=%i\n", port, verbose);
 
-	if ( !request_region(port, CPU5WDT_EXTENT, PFX) ) {
+	init_completion(&cpu5wdt_device.stop);
+	spin_lock_init(&cpu5wdt_lock);
+	cpu5wdt_device.queue = 0;
+	setup_timer(&cpu5wdt_device.timer, cpu5wdt_trigger, 0);
+	cpu5wdt_device.default_ticks = ticks;
+
+	if (!request_region(port, CPU5WDT_EXTENT, PFX)) {
 		printk(KERN_ERR PFX "request_region failed\n");
 		err = -EBUSY;
 		goto no_port;
 	}
 
-	if ( (err = misc_register(&cpu5wdt_misc)) < 0 ) {
-		printk(KERN_ERR PFX "misc_register failed\n");
-		goto no_misc;
-	}
-
 	/* watchdog reboot? */
 	val = inb(port + CPU5WDT_STATUS_REG);
 	val = (val >> 2) & 1;
-	if ( !val )
+	if (!val)
 		printk(KERN_INFO PFX "sorry, was my fault\n");
 
-	init_completion(&cpu5wdt_device.stop);
-	cpu5wdt_device.queue = 0;
-
-	clear_bit(0, &cpu5wdt_device.inuse);
-
-	setup_timer(&cpu5wdt_device.timer, cpu5wdt_trigger, 0);
+	err = misc_register(&cpu5wdt_misc);
+	if (err < 0) {
+		printk(KERN_ERR PFX "misc_register failed\n");
+		goto no_misc;
+	}
 
-	cpu5wdt_device.default_ticks = ticks;
 
 	printk(KERN_INFO PFX "init success\n");
-
 	return 0;
 
 no_misc:
@@ -267,7 +263,7 @@ static int __devinit cpu5wdt_init_module(void)
 
 static void __devexit cpu5wdt_exit(void)
 {
-	if ( cpu5wdt_device.queue ) {
+	if (cpu5wdt_device.queue) {
 		cpu5wdt_device.queue = 0;
 		wait_for_completion(&cpu5wdt_device.stop);
 	}
diff --git a/drivers/watchdog/davinci_wdt.c b/drivers/watchdog/davinci_wdt.c
index 1782c79eff06..2e1360286732 100644
--- a/drivers/watchdog/davinci_wdt.c
+++ b/drivers/watchdog/davinci_wdt.c
@@ -22,10 +22,9 @@
 #include <linux/bitops.h>
 #include <linux/platform_device.h>
 #include <linux/spinlock.h>
-
-#include <asm/hardware.h>
-#include <asm/uaccess.h>
-#include <asm/io.h>
+#include <linux/uaccess.h>
+#include <linux/io.h>
+#include <mach/hardware.h>
 
 #define MODULE_NAME "DAVINCI-WDT: "
 
@@ -143,9 +142,8 @@ static struct watchdog_info ident = {
 	.identity = "DaVinci Watchdog",
 };
 
-static int
-davinci_wdt_ioctl(struct inode *inode, struct file *file, unsigned int cmd,
-		  unsigned long arg)
+static long davinci_wdt_ioctl(struct file *file,
+					unsigned int cmd, unsigned long arg)
 {
 	int ret = -ENOTTY;
 
@@ -160,14 +158,14 @@ davinci_wdt_ioctl(struct inode *inode, struct file *file, unsigned int cmd,
 		ret = put_user(0, (int *)arg);
 		break;
 
-	case WDIOC_GETTIMEOUT:
-		ret = put_user(heartbeat, (int *)arg);
-		break;
-
 	case WDIOC_KEEPALIVE:
 		wdt_service();
 		ret = 0;
 		break;
+
+	case WDIOC_GETTIMEOUT:
+		ret = put_user(heartbeat, (int *)arg);
+		break;
 	}
 	return ret;
 }
@@ -184,7 +182,7 @@ static const struct file_operations davinci_wdt_fops = {
 	.owner = THIS_MODULE,
 	.llseek = no_llseek,
 	.write = davinci_wdt_write,
-	.ioctl = davinci_wdt_ioctl,
+	.unlocked_ioctl = davinci_wdt_ioctl,
 	.open = davinci_wdt_open,
 	.release = davinci_wdt_release,
 };
diff --git a/drivers/watchdog/ep93xx_wdt.c b/drivers/watchdog/ep93xx_wdt.c
index 0e4787a0bb87..e9f950ff86ea 100644
--- a/drivers/watchdog/ep93xx_wdt.c
+++ b/drivers/watchdog/ep93xx_wdt.c
@@ -28,9 +28,8 @@
 #include <linux/miscdevice.h>
 #include <linux/watchdog.h>
 #include <linux/timer.h>
-
-#include <asm/hardware.h>
-#include <asm/uaccess.h>
+#include <linux/uaccess.h>
+#include <mach/hardware.h>
 
 #define WDT_VERSION	"0.3"
 #define PFX		"ep93xx_wdt: "
@@ -136,9 +135,8 @@ static struct watchdog_info ident = {
 	.identity = "EP93xx Watchdog",
 };
 
-static int
-ep93xx_wdt_ioctl(struct inode *inode, struct file *file, unsigned int cmd,
-		 unsigned long arg)
+static long ep93xx_wdt_ioctl(struct file *file,
+					unsigned int cmd, unsigned long arg)
 {
 	int ret = -ENOTTY;
 
@@ -156,15 +154,15 @@ ep93xx_wdt_ioctl(struct inode *inode, struct file *file, unsigned int cmd,
 		ret = put_user(boot_status, (int __user *)arg);
 		break;
 
-	case WDIOC_GETTIMEOUT:
-		/* actually, it is 0.250 seconds.... */
-		ret = put_user(1, (int __user *)arg);
-		break;
-
 	case WDIOC_KEEPALIVE:
 		wdt_keepalive();
 		ret = 0;
 		break;
+
+	case WDIOC_GETTIMEOUT:
+		/* actually, it is 0.250 seconds.... */
+		ret = put_user(1, (int __user *)arg);
+		break;
 	}
 	return ret;
 }
@@ -174,8 +172,8 @@ static int ep93xx_wdt_release(struct inode *inode, struct file *file)
 	if (test_bit(WDT_OK_TO_CLOSE, &wdt_status))
 		wdt_shutdown();
 	else
-		printk(KERN_CRIT PFX "Device closed unexpectedly - "
-			"timer will not stop\n");
+		printk(KERN_CRIT PFX
+			"Device closed unexpectedly - timer will not stop\n");
 
 	clear_bit(WDT_IN_USE, &wdt_status);
 	clear_bit(WDT_OK_TO_CLOSE, &wdt_status);
@@ -186,7 +184,7 @@ static int ep93xx_wdt_release(struct inode *inode, struct file *file)
 static const struct file_operations ep93xx_wdt_fops = {
 	.owner		= THIS_MODULE,
 	.write		= ep93xx_wdt_write,
-	.ioctl		= ep93xx_wdt_ioctl,
+	.unlocked_ioctl	= ep93xx_wdt_ioctl,
 	.open		= ep93xx_wdt_open,
 	.release	= ep93xx_wdt_release,
 };
@@ -243,7 +241,9 @@ module_param(nowayout, int, 0);
 MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started");
 
 module_param(timeout, int, 0);
-MODULE_PARM_DESC(timeout, "Watchdog timeout in seconds. (1<=timeout<=3600, default=" __MODULE_STRING(WATCHDOG_TIMEOUT) ")");
+MODULE_PARM_DESC(timeout,
+	"Watchdog timeout in seconds. (1<=timeout<=3600, default="
+				__MODULE_STRING(WATCHDOG_TIMEOUT) ")");
 
 MODULE_AUTHOR("Ray Lehtiniemi <rayl@mail.com>,"
 		"Alessandro Zummo <a.zummo@towertech.it>");
diff --git a/drivers/watchdog/eurotechwdt.c b/drivers/watchdog/eurotechwdt.c
index b14e9d1f164d..bbd14e34319f 100644
--- a/drivers/watchdog/eurotechwdt.c
+++ b/drivers/watchdog/eurotechwdt.c
@@ -56,14 +56,15 @@
 #include <linux/notifier.h>
 #include <linux/reboot.h>
 #include <linux/init.h>
+#include <linux/io.h>
+#include <linux/uaccess.h>
 
-#include <asm/io.h>
-#include <asm/uaccess.h>
 #include <asm/system.h>
 
 static unsigned long eurwdt_is_open;
 static int eurwdt_timeout;
 static char eur_expect_close;
+static spinlock_t eurwdt_lock;
 
 /*
  * You must set these - there is no sane way to probe for this board.
@@ -78,7 +79,9 @@ static char *ev = "int";
 
 static int nowayout = WATCHDOG_NOWAYOUT;
 module_param(nowayout, int, 0);
-MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=" __MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
+MODULE_PARM_DESC(nowayout,
+		"Watchdog cannot be stopped once started (default="
+				__MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
 
 /*
  * Some symbolic names
@@ -137,7 +140,8 @@ static void eurwdt_activate_timer(void)
 {
 	eurwdt_disable_timer();
 	eurwdt_write_reg(WDT_CTRL_REG, 0x01);	/* activate the WDT */
-	eurwdt_write_reg(WDT_OUTPIN_CFG, !strcmp("int", ev) ? WDT_EVENT_INT : WDT_EVENT_REBOOT);
+	eurwdt_write_reg(WDT_OUTPIN_CFG,
+		!strcmp("int", ev) ? WDT_EVENT_INT : WDT_EVENT_REBOOT);
 
 	/* Setting interrupt line */
 	if (irq == 2 || irq > 15 || irq < 0) {
@@ -206,21 +210,21 @@ size_t count, loff_t *ppos)
 
 			for (i = 0; i != count; i++) {
 				char c;
-				if(get_user(c, buf+i))
+				if (get_user(c, buf + i))
 					return -EFAULT;
 				if (c == 'V')
 					eur_expect_close = 42;
 			}
 		}
+		spin_lock(&eurwdt_lock);
 		eurwdt_ping();	/* the default timeout */
+		spin_unlock(&eurwdt_lock);
 	}
-
 	return count;
 }
 
 /**
  * eurwdt_ioctl:
- * @inode: inode of the device
  * @file: file handle to the device
  * @cmd: watchdog command
  * @arg: argument pointer
@@ -229,13 +233,14 @@ size_t count, loff_t *ppos)
  * according to their available features.
  */
 
-static int eurwdt_ioctl(struct inode *inode, struct file *file,
-	unsigned int cmd, unsigned long arg)
+static long eurwdt_ioctl(struct file *file,
+					unsigned int cmd, unsigned long arg)
 {
 	void __user *argp = (void __user *)arg;
 	int __user *p = argp;
 	static struct watchdog_info ident = {
-		.options	  = WDIOF_KEEPALIVEPING | WDIOF_SETTIMEOUT | WDIOF_MAGICCLOSE,
+		.options	  = WDIOF_KEEPALIVEPING | WDIOF_SETTIMEOUT
+							| WDIOF_MAGICCLOSE,
 		.firmware_version = 1,
 		.identity	  = "WDT Eurotech CPU-1220/1410",
 	};
@@ -243,10 +248,7 @@ static int eurwdt_ioctl(struct inode *inode, struct file *file,
 	int time;
 	int options, retval = -EINVAL;
 
-	switch(cmd) {
-	default:
-		return -ENOTTY;
-
+	switch (cmd) {
 	case WDIOC_GETSUPPORT:
 		return copy_to_user(argp, &ident, sizeof(ident)) ? -EFAULT : 0;
 
@@ -254,8 +256,26 @@ static int eurwdt_ioctl(struct inode *inode, struct file *file,
 	case WDIOC_GETBOOTSTATUS:
 		return put_user(0, p);
 
+	case WDIOC_SETOPTIONS:
+		if (get_user(options, p))
+			return -EFAULT;
+		spin_lock(&eurwdt_lock);
+		if (options & WDIOS_DISABLECARD) {
+			eurwdt_disable_timer();
+			retval = 0;
+		}
+		if (options & WDIOS_ENABLECARD) {
+			eurwdt_activate_timer();
+			eurwdt_ping();
+			retval = 0;
+		}
+		spin_unlock(&eurwdt_lock);
+		return retval;
+
 	case WDIOC_KEEPALIVE:
+		spin_lock(&eurwdt_lock);
 		eurwdt_ping();
+		spin_unlock(&eurwdt_lock);
 		return 0;
 
 	case WDIOC_SETTIMEOUT:
@@ -266,26 +286,17 @@ static int eurwdt_ioctl(struct inode *inode, struct file *file,
 		if (time < 0 || time > 255)
 			return -EINVAL;
 
+		spin_lock(&eurwdt_lock);
 		eurwdt_timeout = time;
 		eurwdt_set_timeout(time);
+		spin_unlock(&eurwdt_lock);
 		/* Fall */
 
 	case WDIOC_GETTIMEOUT:
 		return put_user(eurwdt_timeout, p);
 
-	case WDIOC_SETOPTIONS:
-		if (get_user(options, p))
-			return -EFAULT;
-		if (options & WDIOS_DISABLECARD) {
-			eurwdt_disable_timer();
-			retval = 0;
-		}
-		if (options & WDIOS_ENABLECARD) {
-			eurwdt_activate_timer();
-			eurwdt_ping();
-			retval = 0;
-		}
-		return retval;
+	default:
+		return -ENOTTY;
 	}
 }
 
@@ -322,10 +333,11 @@ static int eurwdt_open(struct inode *inode, struct file *file)
 
 static int eurwdt_release(struct inode *inode, struct file *file)
 {
-	if (eur_expect_close == 42) {
+	if (eur_expect_close == 42)
 		eurwdt_disable_timer();
-	} else {
-		printk(KERN_CRIT "eurwdt: Unexpected close, not stopping watchdog!\n");
+	else {
+		printk(KERN_CRIT
+			"eurwdt: Unexpected close, not stopping watchdog!\n");
 		eurwdt_ping();
 	}
 	clear_bit(0, &eurwdt_is_open);
@@ -348,10 +360,8 @@ static int eurwdt_release(struct inode *inode, struct file *file)
 static int eurwdt_notify_sys(struct notifier_block *this, unsigned long code,
 	void *unused)
 {
-	if (code == SYS_DOWN || code == SYS_HALT) {
-		/* Turn the card off */
-		eurwdt_disable_timer();
-	}
+	if (code == SYS_DOWN || code == SYS_HALT)
+		eurwdt_disable_timer();	/* Turn the card off */
 
 	return NOTIFY_DONE;
 }
@@ -362,11 +372,11 @@ static int eurwdt_notify_sys(struct notifier_block *this, unsigned long code,
 
 
 static const struct file_operations eurwdt_fops = {
-	.owner	= THIS_MODULE,
-	.llseek	= no_llseek,
-	.write	= eurwdt_write,
-	.ioctl	= eurwdt_ioctl,
-	.open	= eurwdt_open,
+	.owner		= THIS_MODULE,
+	.llseek		= no_llseek,
+	.write		= eurwdt_write,
+	.unlocked_ioctl	= eurwdt_ioctl,
+	.open		= eurwdt_open,
 	.release	= eurwdt_release,
 };
 
@@ -419,7 +429,7 @@ static int __init eurwdt_init(void)
 	int ret;
 
 	ret = request_irq(irq, eurwdt_interrupt, IRQF_DISABLED, "eurwdt", NULL);
-	if(ret) {
+	if (ret) {
 		printk(KERN_ERR "eurwdt: IRQ %d is not free.\n", irq);
 		goto out;
 	}
@@ -432,10 +442,13 @@ static int __init eurwdt_init(void)
 
 	ret = register_reboot_notifier(&eurwdt_notifier);
 	if (ret) {
-		printk(KERN_ERR "eurwdt: can't register reboot notifier (err=%d)\n", ret);
+		printk(KERN_ERR
+		    "eurwdt: can't register reboot notifier (err=%d)\n", ret);
 		goto outreg;
 	}
 
+	spin_lock_init(&eurwdt_lock);
+
 	ret = misc_register(&eurwdt_miscdev);
 	if (ret) {
 		printk(KERN_ERR "eurwdt: can't misc_register on minor=%d\n",
diff --git a/drivers/watchdog/geodewdt.c b/drivers/watchdog/geodewdt.c
index 30d09cbbad94..614a5c7017b6 100644
--- a/drivers/watchdog/geodewdt.c
+++ b/drivers/watchdog/geodewdt.c
@@ -17,8 +17,8 @@
 #include <linux/fs.h>
 #include <linux/platform_device.h>
 #include <linux/reboot.h>
+#include <linux/uaccess.h>
 
-#include <asm/uaccess.h>
 #include <asm/geode.h>
 
 #define GEODEWDT_HZ 500
@@ -77,27 +77,24 @@ static int geodewdt_set_heartbeat(int val)
 	return 0;
 }
 
-static int
-geodewdt_open(struct inode *inode, struct file *file)
+static int geodewdt_open(struct inode *inode, struct file *file)
 {
-        if (test_and_set_bit(WDT_FLAGS_OPEN, &wdt_flags))
-                return -EBUSY;
+	if (test_and_set_bit(WDT_FLAGS_OPEN, &wdt_flags))
+		return -EBUSY;
 
-        if (!test_and_clear_bit(WDT_FLAGS_ORPHAN, &wdt_flags))
-                __module_get(THIS_MODULE);
+	if (!test_and_clear_bit(WDT_FLAGS_ORPHAN, &wdt_flags))
+		__module_get(THIS_MODULE);
 
 	geodewdt_ping();
-        return nonseekable_open(inode, file);
+	return nonseekable_open(inode, file);
 }
 
-static int
-geodewdt_release(struct inode *inode, struct file *file)
+static int geodewdt_release(struct inode *inode, struct file *file)
 {
 	if (safe_close) {
 		geodewdt_disable();
 		module_put(THIS_MODULE);
-	}
-	else {
+	} else {
 		printk(KERN_CRIT "Unexpected close - watchdog is not stopping.\n");
 		geodewdt_ping();
 
@@ -109,11 +106,10 @@ geodewdt_release(struct inode *inode, struct file *file)
 	return 0;
 }
 
-static ssize_t
-geodewdt_write(struct file *file, const char __user *data, size_t len,
-	       loff_t *ppos)
+static ssize_t geodewdt_write(struct file *file, const char __user *data,
+				size_t len, loff_t *ppos)
 {
-        if(len) {
+	if (len) {
 		if (!nowayout) {
 			size_t i;
 			safe_close = 0;
@@ -134,9 +130,8 @@ geodewdt_write(struct file *file, const char __user *data, size_t len,
 	return len;
 }
 
-static int
-geodewdt_ioctl(struct inode *inode, struct file *file, unsigned int cmd,
-	       unsigned long arg)
+static int geodewdt_ioctl(struct inode *inode, struct file *file,
+				unsigned int cmd, unsigned long arg)
 {
 	void __user *argp = (void __user *)arg;
 	int __user *p = argp;
@@ -147,9 +142,9 @@ geodewdt_ioctl(struct inode *inode, struct file *file, unsigned int cmd,
 		| WDIOF_MAGICCLOSE,
 		.firmware_version =     1,
 		.identity =             WATCHDOG_NAME,
-        };
+	};
 
-	switch(cmd) {
+	switch (cmd) {
 	case WDIOC_GETSUPPORT:
 		return copy_to_user(argp, &ident,
 				    sizeof(ident)) ? -EFAULT : 0;
@@ -159,22 +154,6 @@ geodewdt_ioctl(struct inode *inode, struct file *file, unsigned int cmd,
 	case WDIOC_GETBOOTSTATUS:
 		return put_user(0, p);
 
-	case WDIOC_KEEPALIVE:
-		geodewdt_ping();
-		return 0;
-
-	case WDIOC_SETTIMEOUT:
-		if (get_user(interval, p))
-			return -EFAULT;
-
-		if (geodewdt_set_heartbeat(interval))
-			return -EINVAL;
-
-/* Fall through */
-
-	case WDIOC_GETTIMEOUT:
-		return put_user(timeout, p);
-
 	case WDIOC_SETOPTIONS:
 	{
 		int options, ret = -EINVAL;
@@ -194,6 +173,20 @@ geodewdt_ioctl(struct inode *inode, struct file *file, unsigned int cmd,
 
 		return ret;
 	}
+	case WDIOC_KEEPALIVE:
+		geodewdt_ping();
+		return 0;
+
+	case WDIOC_SETTIMEOUT:
+		if (get_user(interval, p))
+			return -EFAULT;
+
+		if (geodewdt_set_heartbeat(interval))
+			return -EINVAL;
+	/* Fall through */
+	case WDIOC_GETTIMEOUT:
+		return put_user(timeout, p);
+
 	default:
 		return -ENOTTY;
 	}
@@ -202,22 +195,21 @@ geodewdt_ioctl(struct inode *inode, struct file *file, unsigned int cmd,
 }
 
 static const struct file_operations geodewdt_fops = {
-        .owner          = THIS_MODULE,
-        .llseek         = no_llseek,
-        .write          = geodewdt_write,
-        .ioctl          = geodewdt_ioctl,
-        .open           = geodewdt_open,
-        .release        = geodewdt_release,
+	.owner          = THIS_MODULE,
+	.llseek         = no_llseek,
+	.write          = geodewdt_write,
+	.ioctl          = geodewdt_ioctl,
+	.open           = geodewdt_open,
+	.release        = geodewdt_release,
 };
 
 static struct miscdevice geodewdt_miscdev = {
 	.minor = WATCHDOG_MINOR,
 	.name = "watchdog",
-	.fops = &geodewdt_fops
+	.fops = &geodewdt_fops,
 };
 
-static int __devinit
-geodewdt_probe(struct platform_device *dev)
+static int __devinit geodewdt_probe(struct platform_device *dev)
 {
 	int ret, timer;
 
@@ -248,15 +240,13 @@ geodewdt_probe(struct platform_device *dev)
 	return ret;
 }
 
-static int __devexit
-geodewdt_remove(struct platform_device *dev)
+static int __devexit geodewdt_remove(struct platform_device *dev)
 {
 	misc_deregister(&geodewdt_miscdev);
 	return 0;
 }
 
-static void
-geodewdt_shutdown(struct platform_device *dev)
+static void geodewdt_shutdown(struct platform_device *dev)
 {
 	geodewdt_disable();
 }
@@ -271,8 +261,7 @@ static struct platform_driver geodewdt_driver = {
 	},
 };
 
-static int __init
-geodewdt_init(void)
+static int __init geodewdt_init(void)
 {
 	int ret;
 
@@ -292,8 +281,7 @@ err:
 	return ret;
 }
 
-static void __exit
-geodewdt_exit(void)
+static void __exit geodewdt_exit(void)
 {
 	platform_device_unregister(geodewdt_platform_device);
 	platform_driver_unregister(&geodewdt_driver);
diff --git a/drivers/watchdog/hpwdt.c b/drivers/watchdog/hpwdt.c
index eaa3f2a79ff5..a3765e0be4a8 100644
--- a/drivers/watchdog/hpwdt.c
+++ b/drivers/watchdog/hpwdt.c
@@ -39,9 +39,7 @@
 #include <linux/string.h>
 #include <linux/bootmem.h>
 #include <linux/slab.h>
-#include <asm/dmi.h>
 #include <asm/desc.h>
-#include <asm/kdebug.h>
 
 #define PCI_BIOS32_SD_VALUE		0x5F32335F	/* "_32_" */
 #define CRU_BIOS_SIGNATURE_VALUE	0x55524324
@@ -118,6 +116,7 @@ static unsigned int reload;			/* the computed soft_margin */
 static int nowayout = WATCHDOG_NOWAYOUT;
 static char expect_release;
 static unsigned long hpwdt_is_open;
+static unsigned int allow_kdump;
 
 static void __iomem *pci_mem_addr;		/* the PCI-memory address */
 static unsigned long __iomem *hpwdt_timer_reg;
@@ -223,19 +222,19 @@ static int __devinit cru_detect(unsigned long map_entry,
 
 	if (cmn_regs.u1.ral != 0) {
 		printk(KERN_WARNING
-		       "hpwdt: Call succeeded but with an error: 0x%x\n",
-		       cmn_regs.u1.ral);
+			"hpwdt: Call succeeded but with an error: 0x%x\n",
+			cmn_regs.u1.ral);
 	} else {
 		physical_bios_base = cmn_regs.u2.rebx;
 		physical_bios_offset = cmn_regs.u4.redx;
 		cru_length = cmn_regs.u3.recx;
 		cru_physical_address =
-		    physical_bios_base + physical_bios_offset;
+			physical_bios_base + physical_bios_offset;
 
 		/* If the values look OK, then map it in. */
 		if ((physical_bios_base + physical_bios_offset)) {
 			cru_rom_addr =
-			    ioremap(cru_physical_address, cru_length);
+				ioremap(cru_physical_address, cru_length);
 			if (cru_rom_addr)
 				retval = 0;
 		}
@@ -358,7 +357,6 @@ asm(".text                      \n\t"
     "call       *%r12           \n\t"
     "pushfq                     \n\t"
     "popq        %r12           \n\t"
-    "popfq                      \n\t"
     "movl       %eax, (%r9)     \n\t"
     "movl       %ebx, 4(%r9)    \n\t"
     "movl       %ecx, 8(%r9)    \n\t"
@@ -392,10 +390,10 @@ static void __devinit dmi_find_cru(const struct dmi_header *dm)
 		smbios_cru64_ptr = (struct smbios_cru64_info *) dm;
 		if (smbios_cru64_ptr->signature == CRU_BIOS_SIGNATURE_VALUE) {
 			cru_physical_address =
-			    smbios_cru64_ptr->physical_address +
-			    smbios_cru64_ptr->double_offset;
+				smbios_cru64_ptr->physical_address +
+				smbios_cru64_ptr->double_offset;
 			cru_rom_addr = ioremap(cru_physical_address,
-				    smbios_cru64_ptr->double_length);
+				smbios_cru64_ptr->double_length);
 		}
 	}
 }
@@ -407,7 +405,7 @@ static int __devinit detect_cru_service(void)
 	dmi_walk(dmi_find_cru);
 
 	/* if cru_rom_addr has been set then we found a CRU service */
-	return ((cru_rom_addr != NULL)? 0: -ENODEV);
+	return ((cru_rom_addr != NULL) ? 0 : -ENODEV);
 }
 
 /* ------------------------------------------------------------------------- */
@@ -415,34 +413,6 @@ static int __devinit detect_cru_service(void)
 #endif
 
 /*
- *	NMI Handler
- */
-static int hpwdt_pretimeout(struct notifier_block *nb, unsigned long ulReason,
-			    void *data)
-{
-	static unsigned long rom_pl;
-	static int die_nmi_called;
-
-	if (ulReason != DIE_NMI && ulReason != DIE_NMI_IPI)
-		return NOTIFY_OK;
-
-	spin_lock_irqsave(&rom_lock, rom_pl);
-	if (!die_nmi_called)
-		asminline_call(&cmn_regs, cru_rom_addr);
-	die_nmi_called = 1;
-	spin_unlock_irqrestore(&rom_lock, rom_pl);
-	if (cmn_regs.u1.ral == 0) {
-		printk(KERN_WARNING "hpwdt: An NMI occurred, "
-		       "but unable to determine source.\n");
-	} else {
-		panic("An NMI occurred, please see the Integrated "
-			"Management Log for details.\n");
-	}
-
-	return NOTIFY_STOP;
-}
-
-/*
  *	Watchdog operations
  */
 static void hpwdt_start(void)
@@ -486,6 +456,36 @@ static int hpwdt_change_timer(int new_margin)
 }
 
 /*
+ *	NMI Handler
+ */
+static int hpwdt_pretimeout(struct notifier_block *nb, unsigned long ulReason,
+				void *data)
+{
+	unsigned long rom_pl;
+	static int die_nmi_called;
+
+	if (ulReason != DIE_NMI && ulReason != DIE_NMI_IPI)
+		return NOTIFY_OK;
+
+	spin_lock_irqsave(&rom_lock, rom_pl);
+	if (!die_nmi_called)
+		asminline_call(&cmn_regs, cru_rom_addr);
+	die_nmi_called = 1;
+	spin_unlock_irqrestore(&rom_lock, rom_pl);
+	if (cmn_regs.u1.ral == 0) {
+		printk(KERN_WARNING "hpwdt: An NMI occurred, "
+			"but unable to determine source.\n");
+	} else {
+		if (allow_kdump)
+			hpwdt_stop();
+		panic("An NMI occurred, please see the Integrated "
+			"Management Log for details.\n");
+	}
+
+	return NOTIFY_STOP;
+}
+
+/*
  *	/dev/watchdog handling
  */
 static int hpwdt_open(struct inode *inode, struct file *file)
@@ -535,7 +535,7 @@ static ssize_t hpwdt_write(struct file *file, const char __user *data,
 			/* scan to see whether or not we got the magic char. */
 			for (i = 0; i != len; i++) {
 				char c;
-				if (get_user(c, data+i))
+				if (get_user(c, data + i))
 					return -EFAULT;
 				if (c == 'V')
 					expect_release = 42;
@@ -627,17 +627,18 @@ static struct notifier_block die_notifier = {
  */
 
 static int __devinit hpwdt_init_one(struct pci_dev *dev,
-				    const struct pci_device_id *ent)
+					const struct pci_device_id *ent)
 {
 	int retval;
 
 	/*
 	 * First let's find out if we are on an iLO2 server. We will
 	 * not run on a legacy ASM box.
+	 * So we only support the G5 ProLiant servers and higher.
 	 */
 	if (dev->subsystem_vendor != PCI_VENDOR_ID_HP) {
 		dev_warn(&dev->dev,
-		       "This server does not have an iLO2 ASIC.\n");
+			"This server does not have an iLO2 ASIC.\n");
 		return -ENODEV;
 	}
 
@@ -671,7 +672,7 @@ static int __devinit hpwdt_init_one(struct pci_dev *dev,
 	retval = detect_cru_service();
 	if (retval < 0) {
 		dev_warn(&dev->dev,
-		       "Unable to detect the %d Bit CRU Service.\n",
+			"Unable to detect the %d Bit CRU Service.\n",
 			HPWDT_ARCH);
 		goto error_get_cru;
 	}
@@ -686,7 +687,7 @@ static int __devinit hpwdt_init_one(struct pci_dev *dev,
 	retval = register_die_notifier(&die_notifier);
 	if (retval != 0) {
 		dev_warn(&dev->dev,
-		       "Unable to register a die notifier (err=%d).\n",
+			"Unable to register a die notifier (err=%d).\n",
 			retval);
 		goto error_die_notifier;
 	}
@@ -701,8 +702,9 @@ static int __devinit hpwdt_init_one(struct pci_dev *dev,
 
 	printk(KERN_INFO
 		"hp Watchdog Timer Driver: 1.00"
-		", timer margin: %d seconds( nowayout=%d).\n",
-		soft_margin, nowayout);
+		", timer margin: %d seconds (nowayout=%d)"
+		", allow kernel dump: %s (default = 0/OFF).\n",
+		soft_margin, nowayout, (allow_kdump == 0) ? "OFF" : "ON");
 
 	return 0;
 
@@ -757,6 +759,9 @@ MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR);
 module_param(soft_margin, int, 0);
 MODULE_PARM_DESC(soft_margin, "Watchdog timeout in seconds");
 
+module_param(allow_kdump, int, 0);
+MODULE_PARM_DESC(allow_kdump, "Start a kernel dump after NMI occurs");
+
 module_param(nowayout, int, 0);
 MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default="
 		__MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
diff --git a/drivers/watchdog/i6300esb.c b/drivers/watchdog/i6300esb.c
index ca44fd9b19bb..c13383f7fcb9 100644
--- a/drivers/watchdog/i6300esb.c
+++ b/drivers/watchdog/i6300esb.c
@@ -9,18 +9,18 @@
  *	as published by the Free Software Foundation; either version
  *	2 of the License, or (at your option) any later version.
  *
- *      based on i810-tco.c which is in turn based on softdog.c
+ *	based on i810-tco.c which is in turn based on softdog.c
  *
- * 	The timer is implemented in the following I/O controller hubs:
- * 	(See the intel documentation on http://developer.intel.com.)
- * 	6300ESB chip : document number 300641-003
+ *	The timer is implemented in the following I/O controller hubs:
+ *	(See the intel documentation on http://developer.intel.com.)
+ *	6300ESB chip : document number 300641-003
  *
  *  2004YYZZ Ross Biro
  *	Initial version 0.01
  *  2004YYZZ Ross Biro
- *  	Version 0.02
+ *	Version 0.02
  *  20050210 David Härdeman <david@2gen.com>
- *      Ported driver to kernel 2.6
+ *	Ported driver to kernel 2.6
  */
 
 /*
@@ -38,9 +38,8 @@
 #include <linux/init.h>
 #include <linux/pci.h>
 #include <linux/ioport.h>
-
-#include <asm/uaccess.h>
-#include <asm/io.h>
+#include <linux/uaccess.h>
+#include <linux/io.h>
 
 /* Module and version information */
 #define ESB_VERSION "0.03"
@@ -59,17 +58,17 @@
 #define ESB_RELOAD_REG  BASEADDR + 0x0c /* Reload register                   */
 
 /* Lock register bits */
-#define ESB_WDT_FUNC    ( 0x01 << 2 )   /* Watchdog functionality            */
-#define ESB_WDT_ENABLE  ( 0x01 << 1 )   /* Enable WDT                        */
-#define ESB_WDT_LOCK    ( 0x01 << 0 )   /* Lock (nowayout)                   */
+#define ESB_WDT_FUNC    (0x01 << 2)   /* Watchdog functionality            */
+#define ESB_WDT_ENABLE  (0x01 << 1)   /* Enable WDT                        */
+#define ESB_WDT_LOCK    (0x01 << 0)   /* Lock (nowayout)                   */
 
 /* Config register bits */
-#define ESB_WDT_REBOOT  ( 0x01 << 5 )   /* Enable reboot on timeout          */
-#define ESB_WDT_FREQ    ( 0x01 << 2 )   /* Decrement frequency               */
-#define ESB_WDT_INTTYPE ( 0x11 << 0 )   /* Interrupt type on timer1 timeout  */
+#define ESB_WDT_REBOOT  (0x01 << 5)   /* Enable reboot on timeout          */
+#define ESB_WDT_FREQ    (0x01 << 2)   /* Decrement frequency               */
+#define ESB_WDT_INTTYPE (0x11 << 0)   /* Interrupt type on timer1 timeout  */
 
 /* Reload register bits */
-#define ESB_WDT_RELOAD ( 0x01 << 8 )    /* prevent timeout                   */
+#define ESB_WDT_RELOAD  (0x01 << 8)    /* prevent timeout                   */
 
 /* Magic constants */
 #define ESB_UNLOCK1     0x80            /* Step 1 to unlock reset registers  */
@@ -84,14 +83,20 @@ static unsigned short triggered; /* The status of the watchdog upon boot */
 static char esb_expect_close;
 
 /* module parameters */
-#define WATCHDOG_HEARTBEAT 30   /* 30 sec default heartbeat (1<heartbeat<2*1023) */
+/* 30 sec default heartbeat (1 < heartbeat < 2*1023) */
+#define WATCHDOG_HEARTBEAT 30
 static int heartbeat = WATCHDOG_HEARTBEAT;  /* in seconds */
+
 module_param(heartbeat, int, 0);
-MODULE_PARM_DESC(heartbeat, "Watchdog heartbeat in seconds. (1<heartbeat<2046, default=" __MODULE_STRING(WATCHDOG_HEARTBEAT) ")");
+MODULE_PARM_DESC(heartbeat,
+		"Watchdog heartbeat in seconds. (1<heartbeat<2046, default="
+				__MODULE_STRING(WATCHDOG_HEARTBEAT) ")");
 
 static int nowayout = WATCHDOG_NOWAYOUT;
 module_param(nowayout, int, 0);
-MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=" __MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
+MODULE_PARM_DESC(nowayout,
+		"Watchdog cannot be stopped once started (default="
+				__MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
 
 /*
  * Some i6300ESB specific functions
@@ -103,9 +108,10 @@ MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=" _
  * reload register. After this the appropriate registers can be written
  * to once before they need to be unlocked again.
  */
-static inline void esb_unlock_registers(void) {
-        writeb(ESB_UNLOCK1, ESB_RELOAD_REG);
-        writeb(ESB_UNLOCK2, ESB_RELOAD_REG);
+static inline void esb_unlock_registers(void)
+{
+	writeb(ESB_UNLOCK1, ESB_RELOAD_REG);
+	writeb(ESB_UNLOCK2, ESB_RELOAD_REG);
 }
 
 static void esb_timer_start(void)
@@ -114,8 +120,7 @@ static void esb_timer_start(void)
 
 	/* Enable or Enable + Lock? */
 	val = 0x02 | (nowayout ? 0x01 : 0x00);
-
-        pci_write_config_byte(esb_pci, ESB_LOCK_REG, val);
+	pci_write_config_byte(esb_pci, ESB_LOCK_REG, val);
 }
 
 static int esb_timer_stop(void)
@@ -140,7 +145,7 @@ static void esb_timer_keepalive(void)
 	spin_lock(&esb_lock);
 	esb_unlock_registers();
 	writew(ESB_WDT_RELOAD, ESB_RELOAD_REG);
-        /* FIXME: Do we need to flush anything here? */
+	/* FIXME: Do we need to flush anything here? */
 	spin_unlock(&esb_lock);
 }
 
@@ -165,9 +170,9 @@ static int esb_timer_set_heartbeat(int time)
 
 	/* Write timer 2 */
 	esb_unlock_registers();
-        writel(val, ESB_TIMER2_REG);
+	writel(val, ESB_TIMER2_REG);
 
-        /* Reload */
+	/* Reload */
 	esb_unlock_registers();
 	writew(ESB_WDT_RELOAD, ESB_RELOAD_REG);
 
@@ -179,54 +184,55 @@ static int esb_timer_set_heartbeat(int time)
 	return 0;
 }
 
-static int esb_timer_read (void)
+static int esb_timer_read(void)
 {
-       	u32 count;
+	u32 count;
 
 	/* This isn't documented, and doesn't take into
-         * acount which stage is running, but it looks
-         * like a 20 bit count down, so we might as well report it.
-         */
-        pci_read_config_dword(esb_pci, 0x64, &count);
-        return (int)count;
+	 * acount which stage is running, but it looks
+	 * like a 20 bit count down, so we might as well report it.
+	 */
+	pci_read_config_dword(esb_pci, 0x64, &count);
+	return (int)count;
 }
 
 /*
- * 	/dev/watchdog handling
+ *	/dev/watchdog handling
  */
 
-static int esb_open (struct inode *inode, struct file *file)
+static int esb_open(struct inode *inode, struct file *file)
 {
-        /* /dev/watchdog can only be opened once */
-        if (test_and_set_bit(0, &timer_alive))
-                return -EBUSY;
+	/* /dev/watchdog can only be opened once */
+	if (test_and_set_bit(0, &timer_alive))
+		return -EBUSY;
 
-        /* Reload and activate timer */
-        esb_timer_keepalive ();
-        esb_timer_start ();
+	/* Reload and activate timer */
+	esb_timer_keepalive();
+	esb_timer_start();
 
 	return nonseekable_open(inode, file);
 }
 
-static int esb_release (struct inode *inode, struct file *file)
+static int esb_release(struct inode *inode, struct file *file)
 {
-        /* Shut off the timer. */
-        if (esb_expect_close == 42) {
-                esb_timer_stop ();
-        } else {
-                printk(KERN_CRIT PFX "Unexpected close, not stopping watchdog!\n");
-                esb_timer_keepalive ();
-        }
-        clear_bit(0, &timer_alive);
-        esb_expect_close = 0;
-        return 0;
+	/* Shut off the timer. */
+	if (esb_expect_close == 42)
+		esb_timer_stop();
+	else {
+		printk(KERN_CRIT PFX
+				"Unexpected close, not stopping watchdog!\n");
+		esb_timer_keepalive();
+	}
+	clear_bit(0, &timer_alive);
+	esb_expect_close = 0;
+	return 0;
 }
 
-static ssize_t esb_write (struct file *file, const char __user *data,
-			  size_t len, loff_t * ppos)
+static ssize_t esb_write(struct file *file, const char __user *data,
+			  size_t len, loff_t *ppos)
 {
 	/* See if we got the magic character 'V' and reload the timer */
-        if (len) {
+	if (len) {
 		if (!nowayout) {
 			size_t i;
 
@@ -237,7 +243,7 @@ static ssize_t esb_write (struct file *file, const char __user *data,
 			/* scan to see whether or not we got the magic character */
 			for (i = 0; i != len; i++) {
 				char c;
-				if(get_user(c, data+i))
+				if (get_user(c, data + i))
 					return -EFAULT;
 				if (c == 'V')
 					esb_expect_close = 42;
@@ -245,92 +251,84 @@ static ssize_t esb_write (struct file *file, const char __user *data,
 		}
 
 		/* someone wrote to us, we should reload the timer */
-		esb_timer_keepalive ();
+		esb_timer_keepalive();
 	}
 	return len;
 }
 
-static int esb_ioctl (struct inode *inode, struct file *file,
-		      unsigned int cmd, unsigned long arg)
+static long esb_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
 {
 	int new_options, retval = -EINVAL;
 	int new_heartbeat;
 	void __user *argp = (void __user *)arg;
 	int __user *p = argp;
 	static struct watchdog_info ident = {
-		.options =              WDIOF_SETTIMEOUT |
+		.options =		WDIOF_SETTIMEOUT |
 					WDIOF_KEEPALIVEPING |
 					WDIOF_MAGICCLOSE,
-		.firmware_version =     0,
-		.identity =             ESB_MODULE_NAME,
+		.firmware_version =	0,
+		.identity =		ESB_MODULE_NAME,
 	};
 
 	switch (cmd) {
-		case WDIOC_GETSUPPORT:
-			return copy_to_user(argp, &ident,
-					    sizeof (ident)) ? -EFAULT : 0;
-
-		case WDIOC_GETSTATUS:
-			return put_user (esb_timer_read(), p);
-
-		case WDIOC_GETBOOTSTATUS:
-			return put_user (triggered, p);
+	case WDIOC_GETSUPPORT:
+		return copy_to_user(argp, &ident,
+					sizeof(ident)) ? -EFAULT : 0;
 
-                case WDIOC_KEEPALIVE:
-                        esb_timer_keepalive ();
-                        return 0;
+	case WDIOC_GETSTATUS:
+		return put_user(esb_timer_read(), p);
 
-                case WDIOC_SETOPTIONS:
-                {
-                        if (get_user (new_options, p))
-                                return -EFAULT;
+	case WDIOC_GETBOOTSTATUS:
+		return put_user(triggered, p);
 
-                        if (new_options & WDIOS_DISABLECARD) {
-                                esb_timer_stop ();
-                                retval = 0;
-                        }
+	case WDIOC_SETOPTIONS:
+	{
+		if (get_user(new_options, p))
+			return -EFAULT;
 
-                        if (new_options & WDIOS_ENABLECARD) {
-                                esb_timer_keepalive ();
-                                esb_timer_start ();
-                                retval = 0;
-                        }
-
-                        return retval;
-                }
-
-                case WDIOC_SETTIMEOUT:
-                {
-                        if (get_user(new_heartbeat, p))
-                                return -EFAULT;
-
-                        if (esb_timer_set_heartbeat(new_heartbeat))
-                            return -EINVAL;
-
-                        esb_timer_keepalive ();
-                        /* Fall */
-                }
-
-                case WDIOC_GETTIMEOUT:
-                        return put_user(heartbeat, p);
+		if (new_options & WDIOS_DISABLECARD) {
+			esb_timer_stop();
+			retval = 0;
+		}
 
-                default:
-                        return -ENOTTY;
-        }
+		if (new_options & WDIOS_ENABLECARD) {
+			esb_timer_keepalive();
+			esb_timer_start();
+			retval = 0;
+		}
+		return retval;
+	}
+	case WDIOC_KEEPALIVE:
+		esb_timer_keepalive();
+		return 0;
+
+	case WDIOC_SETTIMEOUT:
+	{
+		if (get_user(new_heartbeat, p))
+			return -EFAULT;
+		if (esb_timer_set_heartbeat(new_heartbeat))
+			return -EINVAL;
+		esb_timer_keepalive();
+		/* Fall */
+	}
+	case WDIOC_GETTIMEOUT:
+		return put_user(heartbeat, p);
+	default:
+		return -ENOTTY;
+	}
 }
 
 /*
  *      Notify system
  */
 
-static int esb_notify_sys (struct notifier_block *this, unsigned long code, void *unused)
+static int esb_notify_sys(struct notifier_block *this,
+					unsigned long code, void *unused)
 {
-        if (code==SYS_DOWN || code==SYS_HALT) {
-                /* Turn the WDT off */
-                esb_timer_stop ();
-        }
+	if (code == SYS_DOWN || code == SYS_HALT)
+		esb_timer_stop();	/* Turn the WDT off */
 
-        return NOTIFY_DONE;
+	return NOTIFY_DONE;
 }
 
 /*
@@ -338,22 +336,22 @@ static int esb_notify_sys (struct notifier_block *this, unsigned long code, void
  */
 
 static const struct file_operations esb_fops = {
-        .owner =        THIS_MODULE,
-        .llseek =       no_llseek,
-        .write =        esb_write,
-        .ioctl =        esb_ioctl,
-        .open =         esb_open,
-        .release =      esb_release,
+	.owner = THIS_MODULE,
+	.llseek = no_llseek,
+	.write = esb_write,
+	.unlocked_ioctl = esb_ioctl,
+	.open = esb_open,
+	.release = esb_release,
 };
 
 static struct miscdevice esb_miscdev = {
-        .minor =        WATCHDOG_MINOR,
-        .name =         "watchdog",
-        .fops =         &esb_fops,
+	.minor = WATCHDOG_MINOR,
+	.name = "watchdog",
+	.fops = &esb_fops,
 };
 
 static struct notifier_block esb_notifier = {
-        .notifier_call =        esb_notify_sys,
+	.notifier_call = esb_notify_sys,
 };
 
 /*
@@ -365,50 +363,44 @@ static struct notifier_block esb_notifier = {
  * want to register another driver on the same PCI id.
  */
 static struct pci_device_id esb_pci_tbl[] = {
-        { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ESB_9), },
-        { 0, },                 /* End of list */
+	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ESB_9), },
+	{ 0, },                 /* End of list */
 };
-MODULE_DEVICE_TABLE (pci, esb_pci_tbl);
+MODULE_DEVICE_TABLE(pci, esb_pci_tbl);
 
 /*
  *      Init & exit routines
  */
 
-static unsigned char __init esb_getdevice (void)
+static unsigned char __init esb_getdevice(void)
 {
 	u8 val1;
 	unsigned short val2;
+	/*
+	 *      Find the PCI device
+	 */
 
-        struct pci_dev *dev = NULL;
-        /*
-         *      Find the PCI device
-         */
-
-        for_each_pci_dev(dev) {
-                if (pci_match_id(esb_pci_tbl, dev)) {
-                        esb_pci = dev;
-                        break;
-                }
-	}
+	esb_pci = pci_get_device(PCI_VENDOR_ID_INTEL,
+					PCI_DEVICE_ID_INTEL_ESB_9, NULL);
 
-        if (esb_pci) {
-        	if (pci_enable_device(esb_pci)) {
-			printk (KERN_ERR PFX "failed to enable device\n");
+	if (esb_pci) {
+		if (pci_enable_device(esb_pci)) {
+			printk(KERN_ERR PFX "failed to enable device\n");
 			goto err_devput;
 		}
 
 		if (pci_request_region(esb_pci, 0, ESB_MODULE_NAME)) {
-			printk (KERN_ERR PFX "failed to request region\n");
+			printk(KERN_ERR PFX "failed to request region\n");
 			goto err_disable;
 		}
 
 		BASEADDR = ioremap(pci_resource_start(esb_pci, 0),
 				   pci_resource_len(esb_pci, 0));
 		if (BASEADDR == NULL) {
-                	/* Something's wrong here, BASEADDR has to be set */
-			printk (KERN_ERR PFX "failed to get BASEADDR\n");
-                        goto err_release;
-                }
+			/* Something's wrong here, BASEADDR has to be set */
+			printk(KERN_ERR PFX "failed to get BASEADDR\n");
+			goto err_release;
+		}
 
 		/*
 		 * The watchdog has two timers, it can be setup so that the
@@ -425,7 +417,7 @@ static unsigned char __init esb_getdevice (void)
 		/* Check that the WDT isn't already locked */
 		pci_read_config_byte(esb_pci, ESB_LOCK_REG, &val1);
 		if (val1 & ESB_WDT_LOCK)
-			printk (KERN_WARNING PFX "nowayout already set\n");
+			printk(KERN_WARNING PFX "nowayout already set\n");
 
 		/* Set the timer to watchdog mode and disable it for now */
 		pci_write_config_byte(esb_pci, ESB_LOCK_REG, 0x00);
@@ -452,44 +444,44 @@ err_devput:
 	return 0;
 }
 
-static int __init watchdog_init (void)
+static int __init watchdog_init(void)
 {
-        int ret;
-
-        /* Check whether or not the hardware watchdog is there */
-        if (!esb_getdevice () || esb_pci == NULL)
-                return -ENODEV;
-
-        /* Check that the heartbeat value is within it's range ; if not reset to the default */
-        if (esb_timer_set_heartbeat (heartbeat)) {
-                esb_timer_set_heartbeat (WATCHDOG_HEARTBEAT);
-                printk(KERN_INFO PFX "heartbeat value must be 1<heartbeat<2046, using %d\n",
-		       heartbeat);
-        }
-
-        ret = register_reboot_notifier(&esb_notifier);
-        if (ret != 0) {
-                printk(KERN_ERR PFX "cannot register reboot notifier (err=%d)\n",
-                        ret);
-                goto err_unmap;
-        }
-
-        ret = misc_register(&esb_miscdev);
-        if (ret != 0) {
-                printk(KERN_ERR PFX "cannot register miscdev on minor=%d (err=%d)\n",
-                        WATCHDOG_MINOR, ret);
-                goto err_notifier;
-        }
-
-        esb_timer_stop ();
-
-        printk (KERN_INFO PFX "initialized (0x%p). heartbeat=%d sec (nowayout=%d)\n",
-                BASEADDR, heartbeat, nowayout);
+	int ret;
+
+	/* Check whether or not the hardware watchdog is there */
+	if (!esb_getdevice() || esb_pci == NULL)
+		return -ENODEV;
+
+	/* Check that the heartbeat value is within it's range;
+	   if not reset to the default */
+	if (esb_timer_set_heartbeat(heartbeat)) {
+		esb_timer_set_heartbeat(WATCHDOG_HEARTBEAT);
+		printk(KERN_INFO PFX
+			"heartbeat value must be 1<heartbeat<2046, using %d\n",
+								heartbeat);
+	}
+	ret = register_reboot_notifier(&esb_notifier);
+	if (ret != 0) {
+		printk(KERN_ERR PFX
+			"cannot register reboot notifier (err=%d)\n", ret);
+		goto err_unmap;
+	}
 
-        return 0;
+	ret = misc_register(&esb_miscdev);
+	if (ret != 0) {
+		printk(KERN_ERR PFX
+			"cannot register miscdev on minor=%d (err=%d)\n",
+							WATCHDOG_MINOR, ret);
+		goto err_notifier;
+	}
+	esb_timer_stop();
+	printk(KERN_INFO PFX
+		"initialized (0x%p). heartbeat=%d sec (nowayout=%d)\n",
+						BASEADDR, heartbeat, nowayout);
+	return 0;
 
 err_notifier:
-        unregister_reboot_notifier(&esb_notifier);
+	unregister_reboot_notifier(&esb_notifier);
 err_unmap:
 	iounmap(BASEADDR);
 /* err_release: */
@@ -498,18 +490,18 @@ err_unmap:
 	pci_disable_device(esb_pci);
 /* err_devput: */
 	pci_dev_put(esb_pci);
-        return ret;
+	return ret;
 }
 
-static void __exit watchdog_cleanup (void)
+static void __exit watchdog_cleanup(void)
 {
 	/* Stop the timer before we leave */
 	if (!nowayout)
-		esb_timer_stop ();
+		esb_timer_stop();
 
 	/* Deregister */
 	misc_deregister(&esb_miscdev);
-        unregister_reboot_notifier(&esb_notifier);
+	unregister_reboot_notifier(&esb_notifier);
 	iounmap(BASEADDR);
 	pci_release_region(esb_pci, 0);
 	pci_disable_device(esb_pci);
diff --git a/drivers/watchdog/iTCO_vendor.h b/drivers/watchdog/iTCO_vendor.h
new file mode 100644
index 000000000000..9e27e6422f66
--- /dev/null
+++ b/drivers/watchdog/iTCO_vendor.h
@@ -0,0 +1,15 @@
+/* iTCO Vendor Specific Support hooks */
+#ifdef CONFIG_ITCO_VENDOR_SUPPORT
+extern void iTCO_vendor_pre_start(unsigned long, unsigned int);
+extern void iTCO_vendor_pre_stop(unsigned long);
+extern void iTCO_vendor_pre_keepalive(unsigned long, unsigned int);
+extern void iTCO_vendor_pre_set_heartbeat(unsigned int);
+extern int iTCO_vendor_check_noreboot_on(void);
+#else
+#define iTCO_vendor_pre_start(acpibase, heartbeat)	{}
+#define iTCO_vendor_pre_stop(acpibase)			{}
+#define iTCO_vendor_pre_keepalive(acpibase, heartbeat)	{}
+#define iTCO_vendor_pre_set_heartbeat(heartbeat)	{}
+#define iTCO_vendor_check_noreboot_on()			1
+				/* 1=check noreboot; 0=don't check */
+#endif
diff --git a/drivers/watchdog/iTCO_vendor_support.c b/drivers/watchdog/iTCO_vendor_support.c
index cafc465f2ae3..ca344a85eb95 100644
--- a/drivers/watchdog/iTCO_vendor_support.c
+++ b/drivers/watchdog/iTCO_vendor_support.c
@@ -18,9 +18,9 @@
  */
 
 /* Module and version information */
-#define DRV_NAME        "iTCO_vendor_support"
-#define DRV_VERSION     "1.01"
-#define DRV_RELDATE     "11-Nov-2006"
+#define DRV_NAME	"iTCO_vendor_support"
+#define DRV_VERSION	"1.01"
+#define DRV_RELDATE	"11-Nov-2006"
 #define PFX		DRV_NAME ": "
 
 /* Includes */
@@ -31,19 +31,22 @@
 #include <linux/kernel.h>		/* For printk/panic/... */
 #include <linux/init.h>			/* For __init/__exit/... */
 #include <linux/ioport.h>		/* For io-port access */
+#include <linux/io.h>			/* For inb/outb/... */
 
-#include <asm/io.h>			/* For inb/outb/... */
+#include "iTCO_vendor.h"
 
 /* iTCO defines */
 #define	SMI_EN		acpibase + 0x30	/* SMI Control and Enable Register */
-#define	TCOBASE		acpibase + 0x60	/* TCO base address		*/
-#define	TCO1_STS	TCOBASE + 0x04	/* TCO1 Status Register		*/
+#define	TCOBASE		acpibase + 0x60	/* TCO base address */
+#define	TCO1_STS	TCOBASE + 0x04	/* TCO1 Status Register */
 
 /* List of vendor support modes */
-#define SUPERMICRO_OLD_BOARD	1	/* SuperMicro Pentium 3 Era 370SSE+-OEM1/P3TSSE */
-#define SUPERMICRO_NEW_BOARD	2	/* SuperMicro Pentium 4 / Xeon 4 / EMT64T Era Systems */
+/* SuperMicro Pentium 3 Era 370SSE+-OEM1/P3TSSE */
+#define SUPERMICRO_OLD_BOARD	1
+/* SuperMicro Pentium 4 / Xeon 4 / EMT64T Era Systems */
+#define SUPERMICRO_NEW_BOARD	2
 
-static int vendorsupport = 0;
+static int vendorsupport;
 module_param(vendorsupport, int, 0);
 MODULE_PARM_DESC(vendorsupport, "iTCO vendor specific support mode, default=0 (none), 1=SuperMicro Pent3, 2=SuperMicro Pent4+");
 
@@ -143,34 +146,35 @@ static void supermicro_old_pre_keepalive(unsigned long acpibase)
  */
 
 /* I/O Port's */
-#define SM_REGINDEX	0x2e		/* SuperMicro ICH4+ Register Index */
-#define SM_DATAIO	0x2f		/* SuperMicro ICH4+ Register Data I/O */
+#define SM_REGINDEX	0x2e	/* SuperMicro ICH4+ Register Index */
+#define SM_DATAIO	0x2f	/* SuperMicro ICH4+ Register Data I/O */
 
 /* Control Register's */
-#define SM_CTLPAGESW	0x07		/* SuperMicro ICH4+ Control Page Switch */
-#define SM_CTLPAGE		0x08	/* SuperMicro ICH4+ Control Page Num */
+#define SM_CTLPAGESW	0x07	/* SuperMicro ICH4+ Control Page Switch */
+#define SM_CTLPAGE	0x08	/* SuperMicro ICH4+ Control Page Num */
 
-#define SM_WATCHENABLE	0x30		/* Watchdog enable: Bit 0: 0=off, 1=on */
+#define SM_WATCHENABLE	0x30	/* Watchdog enable: Bit 0: 0=off, 1=on */
 
-#define SM_WATCHPAGE	0x87		/* Watchdog unlock control page */
+#define SM_WATCHPAGE	0x87	/* Watchdog unlock control page */
 
-#define SM_ENDWATCH	0xAA		/* Watchdog lock control page */
+#define SM_ENDWATCH	0xAA	/* Watchdog lock control page */
 
-#define SM_COUNTMODE	0xf5		/* Watchdog count mode select */
-					/* (Bit 3: 0 = seconds, 1 = minutes */
+#define SM_COUNTMODE	0xf5	/* Watchdog count mode select */
+				/* (Bit 3: 0 = seconds, 1 = minutes */
 
-#define SM_WATCHTIMER	0xf6		/* 8-bits, Watchdog timer counter (RW) */
+#define SM_WATCHTIMER	0xf6	/* 8-bits, Watchdog timer counter (RW) */
 
-#define SM_RESETCONTROL	0xf7		/* Watchdog reset control */
-					/* Bit 6: timer is reset by kbd interrupt */
-					/* Bit 7: timer is reset by mouse interrupt */
+#define SM_RESETCONTROL	0xf7	/* Watchdog reset control */
+				/* Bit 6: timer is reset by kbd interrupt */
+				/* Bit 7: timer is reset by mouse interrupt */
 
 static void supermicro_new_unlock_watchdog(void)
 {
-	outb(SM_WATCHPAGE, SM_REGINDEX);	/* Write 0x87 to port 0x2e twice */
+	/* Write 0x87 to port 0x2e twice */
 	outb(SM_WATCHPAGE, SM_REGINDEX);
-
-	outb(SM_CTLPAGESW, SM_REGINDEX);	/* Switch to watchdog control page */
+	outb(SM_WATCHPAGE, SM_REGINDEX);
+	/* Switch to watchdog control page */
+	outb(SM_CTLPAGESW, SM_REGINDEX);
 	outb(SM_CTLPAGE, SM_DATAIO);
 }
 
@@ -192,7 +196,7 @@ static void supermicro_new_pre_start(unsigned int heartbeat)
 	outb(val, SM_DATAIO);
 
 	/* Write heartbeat interval to WDOG */
-	outb (SM_WATCHTIMER, SM_REGINDEX);
+	outb(SM_WATCHTIMER, SM_REGINDEX);
 	outb((heartbeat & 255), SM_DATAIO);
 
 	/* Make sure keyboard/mouse interrupts don't interfere */
@@ -277,7 +281,7 @@ EXPORT_SYMBOL(iTCO_vendor_pre_set_heartbeat);
 
 int iTCO_vendor_check_noreboot_on(void)
 {
-	switch(vendorsupport) {
+	switch (vendorsupport) {
 	case SUPERMICRO_OLD_BOARD:
 		return 0;
 	default:
@@ -288,13 +292,13 @@ EXPORT_SYMBOL(iTCO_vendor_check_noreboot_on);
 
 static int __init iTCO_vendor_init_module(void)
 {
-	printk (KERN_INFO PFX "vendor-support=%d\n", vendorsupport);
+	printk(KERN_INFO PFX "vendor-support=%d\n", vendorsupport);
 	return 0;
 }
 
 static void __exit iTCO_vendor_exit_module(void)
 {
-	printk (KERN_INFO PFX "Module Unloaded\n");
+	printk(KERN_INFO PFX "Module Unloaded\n");
 }
 
 module_init(iTCO_vendor_init_module);
diff --git a/drivers/watchdog/iTCO_wdt.c b/drivers/watchdog/iTCO_wdt.c
index 95ba985bd341..bfb93bc2ca9f 100644
--- a/drivers/watchdog/iTCO_wdt.c
+++ b/drivers/watchdog/iTCO_wdt.c
@@ -55,9 +55,9 @@
  */
 
 /* Module and version information */
-#define DRV_NAME        "iTCO_wdt"
-#define DRV_VERSION     "1.03"
-#define DRV_RELDATE     "30-Apr-2008"
+#define DRV_NAME	"iTCO_wdt"
+#define DRV_VERSION	"1.03"
+#define DRV_RELDATE	"30-Apr-2008"
 #define PFX		DRV_NAME ": "
 
 /* Includes */
@@ -66,7 +66,8 @@
 #include <linux/types.h>		/* For standard types (like size_t) */
 #include <linux/errno.h>		/* For the -ENODEV/... values */
 #include <linux/kernel.h>		/* For printk/panic/... */
-#include <linux/miscdevice.h>		/* For MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR) */
+#include <linux/miscdevice.h>		/* For MODULE_ALIAS_MISCDEV
+							(WATCHDOG_MINOR) */
 #include <linux/watchdog.h>		/* For the watchdog specific items */
 #include <linux/init.h>			/* For __init/__exit/... */
 #include <linux/fs.h>			/* For file operations */
@@ -74,9 +75,10 @@
 #include <linux/pci.h>			/* For pci functions */
 #include <linux/ioport.h>		/* For io-port access */
 #include <linux/spinlock.h>		/* For spin_lock/spin_unlock/... */
+#include <linux/uaccess.h>		/* For copy_to_user/put_user/... */
+#include <linux/io.h>			/* For inb/outb/... */
 
-#include <asm/uaccess.h>		/* For copy_to_user/put_user/... */
-#include <asm/io.h>			/* For inb/outb/... */
+#include "iTCO_vendor.h"
 
 /* TCO related info */
 enum iTCO_chipsets {
@@ -105,7 +107,7 @@ enum iTCO_chipsets {
 	TCO_ICH9,	/* ICH9 */
 	TCO_ICH9R,	/* ICH9R */
 	TCO_ICH9DH,	/* ICH9DH */
-	TCO_ICH9DO,     /* ICH9DO */
+	TCO_ICH9DO,	/* ICH9DO */
 	TCO_631XESB,	/* 631xESB/632xESB */
 };
 
@@ -140,7 +142,7 @@ static struct {
 	{"ICH9DH", 2},
 	{"ICH9DO", 2},
 	{"631xESB/632xESB", 2},
-	{NULL,0}
+	{NULL, 0}
 };
 
 #define ITCO_PCI_DEVICE(dev, data) 	\
@@ -159,32 +161,32 @@ static struct {
  * functions that probably will be registered by other drivers.
  */
 static struct pci_device_id iTCO_wdt_pci_tbl[] = {
-	{ ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_82801AA_0,	TCO_ICH    )},
-	{ ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_82801AB_0,	TCO_ICH0   )},
-	{ ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_82801BA_0,	TCO_ICH2   )},
-	{ ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_82801BA_10,	TCO_ICH2M  )},
-	{ ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_82801CA_0,	TCO_ICH3   )},
-	{ ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_82801CA_12,	TCO_ICH3M  )},
-	{ ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_82801DB_0,	TCO_ICH4   )},
-	{ ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_82801DB_12,	TCO_ICH4M  )},
-	{ ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_82801E_0,		TCO_CICH   )},
-	{ ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_82801EB_0,	TCO_ICH5   )},
+	{ ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_82801AA_0,	TCO_ICH)},
+	{ ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_82801AB_0,	TCO_ICH0)},
+	{ ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_82801BA_0,	TCO_ICH2)},
+	{ ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_82801BA_10,	TCO_ICH2M)},
+	{ ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_82801CA_0,	TCO_ICH3)},
+	{ ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_82801CA_12,	TCO_ICH3M)},
+	{ ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_82801DB_0,	TCO_ICH4)},
+	{ ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_82801DB_12,	TCO_ICH4M)},
+	{ ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_82801E_0,		TCO_CICH)},
+	{ ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_82801EB_0,	TCO_ICH5)},
 	{ ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_ESB_1,		TCO_6300ESB)},
-	{ ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_ICH6_0,		TCO_ICH6   )},
-	{ ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_ICH6_1,		TCO_ICH6M  )},
-	{ ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_ICH6_2,		TCO_ICH6W  )},
-	{ ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_ICH7_0,		TCO_ICH7   )},
-	{ ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_ICH7_1,		TCO_ICH7M  )},
+	{ ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_ICH6_0,		TCO_ICH6)},
+	{ ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_ICH6_1,		TCO_ICH6M)},
+	{ ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_ICH6_2,		TCO_ICH6W)},
+	{ ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_ICH7_0,		TCO_ICH7)},
+	{ ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_ICH7_1,		TCO_ICH7M)},
 	{ ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_ICH7_31,		TCO_ICH7MDH)},
-	{ ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_ICH8_0,		TCO_ICH8   )},
-	{ ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_ICH8_1,		TCO_ICH8ME )},
-	{ ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_ICH8_2,		TCO_ICH8DH )},
-	{ ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_ICH8_3,		TCO_ICH8DO )},
-	{ ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_ICH8_4,		TCO_ICH8M  )},
-	{ ITCO_PCI_DEVICE(0x2918,				TCO_ICH9   )},
-	{ ITCO_PCI_DEVICE(0x2916,				TCO_ICH9R  )},
-	{ ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_ICH9_2,		TCO_ICH9DH )},
-	{ ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_ICH9_4,           TCO_ICH9DO )},
+	{ ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_ICH8_0,		TCO_ICH8)},
+	{ ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_ICH8_1,		TCO_ICH8ME)},
+	{ ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_ICH8_2,		TCO_ICH8DH)},
+	{ ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_ICH8_3,		TCO_ICH8DO)},
+	{ ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_ICH8_4,		TCO_ICH8M)},
+	{ ITCO_PCI_DEVICE(0x2918,				TCO_ICH9)},
+	{ ITCO_PCI_DEVICE(0x2916,				TCO_ICH9R)},
+	{ ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_ICH9_2,		TCO_ICH9DH)},
+	{ ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_ICH9_4,		TCO_ICH9DO)},
 	{ ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_ESB2_0,		TCO_631XESB)},
 	{ ITCO_PCI_DEVICE(0x2671,				TCO_631XESB)},
 	{ ITCO_PCI_DEVICE(0x2672,				TCO_631XESB)},
@@ -203,13 +205,15 @@ static struct pci_device_id iTCO_wdt_pci_tbl[] = {
 	{ ITCO_PCI_DEVICE(0x267f,				TCO_631XESB)},
 	{ 0, },			/* End of list */
 };
-MODULE_DEVICE_TABLE (pci, iTCO_wdt_pci_tbl);
+MODULE_DEVICE_TABLE(pci, iTCO_wdt_pci_tbl);
 
 /* Address definitions for the TCO */
-#define	TCOBASE		iTCO_wdt_private.ACPIBASE + 0x60	/* TCO base address                */
-#define	SMI_EN		iTCO_wdt_private.ACPIBASE + 0x30	/* SMI Control and Enable Register */
+/* TCO base address */
+#define	TCOBASE		iTCO_wdt_private.ACPIBASE + 0x60
+/* SMI Control and Enable Register */
+#define	SMI_EN		iTCO_wdt_private.ACPIBASE + 0x30
 
-#define TCO_RLD		TCOBASE + 0x00	/* TCO Timer Reload and Current Value */
+#define TCO_RLD		TCOBASE + 0x00	/* TCO Timer Reload and Curr. Value */
 #define TCOv1_TMR	TCOBASE + 0x01	/* TCOv1 Timer Initial Value	*/
 #define	TCO_DAT_IN	TCOBASE + 0x02	/* TCO Data In Register		*/
 #define	TCO_DAT_OUT	TCOBASE + 0x03	/* TCO Data Out Register	*/
@@ -222,15 +226,21 @@ MODULE_DEVICE_TABLE (pci, iTCO_wdt_pci_tbl);
 /* internal variables */
 static unsigned long is_active;
 static char expect_release;
-static struct {				/* this is private data for the iTCO_wdt device */
-	unsigned int iTCO_version;	/* TCO version/generation */
-	unsigned long ACPIBASE;		/* The cards ACPIBASE address (TCOBASE = ACPIBASE+0x60) */
-	unsigned long __iomem *gcs;	/* NO_REBOOT flag is Memory-Mapped GCS register bit 5 (TCO version 2) */
-	spinlock_t io_lock;		/* the lock for io operations */
-	struct pci_dev *pdev;		/* the PCI-device */
+static struct {		/* this is private data for the iTCO_wdt device */
+	/* TCO version/generation */
+	unsigned int iTCO_version;
+	/* The cards ACPIBASE address (TCOBASE = ACPIBASE+0x60) */
+	unsigned long ACPIBASE;
+	/* NO_REBOOT flag is Memory-Mapped GCS register bit 5 (TCO version 2)*/
+	unsigned long __iomem *gcs;
+	/* the lock for io operations */
+	spinlock_t io_lock;
+	/* the PCI-device */
+	struct pci_dev *pdev;
 } iTCO_wdt_private;
 
-static struct platform_device *iTCO_wdt_platform_device;	/* the watchdog platform device */
+/* the watchdog platform device */
+static struct platform_device *iTCO_wdt_platform_device;
 
 /* module parameters */
 #define WATCHDOG_HEARTBEAT 30	/* 30 sec default heartbeat */
@@ -240,22 +250,9 @@ MODULE_PARM_DESC(heartbeat, "Watchdog heartbeat in seconds. (2<heartbeat<39 (TCO
 
 static int nowayout = WATCHDOG_NOWAYOUT;
 module_param(nowayout, int, 0);
-MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=" __MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
-
-/* iTCO Vendor Specific Support hooks */
-#ifdef CONFIG_ITCO_VENDOR_SUPPORT
-extern void iTCO_vendor_pre_start(unsigned long, unsigned int);
-extern void iTCO_vendor_pre_stop(unsigned long);
-extern void iTCO_vendor_pre_keepalive(unsigned long, unsigned int);
-extern void iTCO_vendor_pre_set_heartbeat(unsigned int);
-extern int iTCO_vendor_check_noreboot_on(void);
-#else
-#define iTCO_vendor_pre_start(acpibase, heartbeat)	{}
-#define iTCO_vendor_pre_stop(acpibase)			{}
-#define iTCO_vendor_pre_keepalive(acpibase,heartbeat)	{}
-#define iTCO_vendor_pre_set_heartbeat(heartbeat)	{}
-#define iTCO_vendor_check_noreboot_on()			1	/* 1=check noreboot; 0=don't check */
-#endif
+MODULE_PARM_DESC(nowayout,
+	"Watchdog cannot be stopped once started (default="
+				__MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
 
 /*
  * Some TCO specific functions
@@ -369,11 +366,10 @@ static int iTCO_wdt_keepalive(void)
 	iTCO_vendor_pre_keepalive(iTCO_wdt_private.ACPIBASE, heartbeat);
 
 	/* Reload the timer by writing to the TCO Timer Counter register */
-	if (iTCO_wdt_private.iTCO_version == 2) {
+	if (iTCO_wdt_private.iTCO_version == 2)
 		outw(0x01, TCO_RLD);
-	} else if (iTCO_wdt_private.iTCO_version == 1) {
+	else if (iTCO_wdt_private.iTCO_version == 1)
 		outb(0x01, TCO_RLD);
-	}
 
 	spin_unlock(&iTCO_wdt_private.io_lock);
 	return 0;
@@ -425,7 +421,7 @@ static int iTCO_wdt_set_heartbeat(int t)
 	return 0;
 }
 
-static int iTCO_wdt_get_timeleft (int *time_left)
+static int iTCO_wdt_get_timeleft(int *time_left)
 {
 	unsigned int val16;
 	unsigned char val8;
@@ -454,7 +450,7 @@ static int iTCO_wdt_get_timeleft (int *time_left)
  *	/dev/watchdog handling
  */
 
-static int iTCO_wdt_open (struct inode *inode, struct file *file)
+static int iTCO_wdt_open(struct inode *inode, struct file *file)
 {
 	/* /dev/watchdog can only be opened once */
 	if (test_and_set_bit(0, &is_active))
@@ -468,7 +464,7 @@ static int iTCO_wdt_open (struct inode *inode, struct file *file)
 	return nonseekable_open(inode, file);
 }
 
-static int iTCO_wdt_release (struct inode *inode, struct file *file)
+static int iTCO_wdt_release(struct inode *inode, struct file *file)
 {
 	/*
 	 *      Shut off the timer.
@@ -476,7 +472,8 @@ static int iTCO_wdt_release (struct inode *inode, struct file *file)
 	if (expect_release == 42) {
 		iTCO_wdt_stop();
 	} else {
-		printk(KERN_CRIT PFX "Unexpected close, not stopping watchdog!\n");
+		printk(KERN_CRIT PFX
+			"Unexpected close, not stopping watchdog!\n");
 		iTCO_wdt_keepalive();
 	}
 	clear_bit(0, &is_active);
@@ -484,22 +481,23 @@ static int iTCO_wdt_release (struct inode *inode, struct file *file)
 	return 0;
 }
 
-static ssize_t iTCO_wdt_write (struct file *file, const char __user *data,
-			      size_t len, loff_t * ppos)
+static ssize_t iTCO_wdt_write(struct file *file, const char __user *data,
+			      size_t len, loff_t *ppos)
 {
 	/* See if we got the magic character 'V' and reload the timer */
 	if (len) {
 		if (!nowayout) {
 			size_t i;
 
-			/* note: just in case someone wrote the magic character
-			 * five months ago... */
+			/* note: just in case someone wrote the magic
+			   character five months ago... */
 			expect_release = 0;
 
-			/* scan to see whether or not we got the magic character */
+			/* scan to see whether or not we got the
+			   magic character */
 			for (i = 0; i != len; i++) {
 				char c;
-				if (get_user(c, data+i))
+				if (get_user(c, data + i))
 					return -EFAULT;
 				if (c == 'V')
 					expect_release = 42;
@@ -512,8 +510,8 @@ static ssize_t iTCO_wdt_write (struct file *file, const char __user *data,
 	return len;
 }
 
-static int iTCO_wdt_ioctl (struct inode *inode, struct file *file,
-			  unsigned int cmd, unsigned long arg)
+static long iTCO_wdt_ioctl(struct file *file, unsigned int cmd,
+							unsigned long arg)
 {
 	int new_options, retval = -EINVAL;
 	int new_heartbeat;
@@ -528,64 +526,52 @@ static int iTCO_wdt_ioctl (struct inode *inode, struct file *file,
 	};
 
 	switch (cmd) {
-		case WDIOC_GETSUPPORT:
-			return copy_to_user(argp, &ident,
-				sizeof (ident)) ? -EFAULT : 0;
-
-		case WDIOC_GETSTATUS:
-		case WDIOC_GETBOOTSTATUS:
-			return put_user(0, p);
-
-		case WDIOC_KEEPALIVE:
-			iTCO_wdt_keepalive();
-			return 0;
-
-		case WDIOC_SETOPTIONS:
-		{
-			if (get_user(new_options, p))
-				return -EFAULT;
-
-			if (new_options & WDIOS_DISABLECARD) {
-				iTCO_wdt_stop();
-				retval = 0;
-			}
-
-			if (new_options & WDIOS_ENABLECARD) {
-				iTCO_wdt_keepalive();
-				iTCO_wdt_start();
-				retval = 0;
-			}
-
-			return retval;
+	case WDIOC_GETSUPPORT:
+		return copy_to_user(argp, &ident, sizeof(ident)) ? -EFAULT : 0;
+	case WDIOC_GETSTATUS:
+	case WDIOC_GETBOOTSTATUS:
+		return put_user(0, p);
+
+	case WDIOC_SETOPTIONS:
+	{
+		if (get_user(new_options, p))
+			return -EFAULT;
+
+		if (new_options & WDIOS_DISABLECARD) {
+			iTCO_wdt_stop();
+			retval = 0;
 		}
-
-		case WDIOC_SETTIMEOUT:
-		{
-			if (get_user(new_heartbeat, p))
-				return -EFAULT;
-
-			if (iTCO_wdt_set_heartbeat(new_heartbeat))
-				return -EINVAL;
-
+		if (new_options & WDIOS_ENABLECARD) {
 			iTCO_wdt_keepalive();
-			/* Fall */
-		}
-
-		case WDIOC_GETTIMEOUT:
-			return put_user(heartbeat, p);
-
-		case WDIOC_GETTIMELEFT:
-		{
-			int time_left;
-
-			if (iTCO_wdt_get_timeleft(&time_left))
-				return -EINVAL;
-
-			return put_user(time_left, p);
+			iTCO_wdt_start();
+			retval = 0;
 		}
+		return retval;
+	}
+	case WDIOC_KEEPALIVE:
+		iTCO_wdt_keepalive();
+		return 0;
 
-		default:
-			return -ENOTTY;
+	case WDIOC_SETTIMEOUT:
+	{
+		if (get_user(new_heartbeat, p))
+			return -EFAULT;
+		if (iTCO_wdt_set_heartbeat(new_heartbeat))
+			return -EINVAL;
+		iTCO_wdt_keepalive();
+		/* Fall */
+	}
+	case WDIOC_GETTIMEOUT:
+		return put_user(heartbeat, p);
+	case WDIOC_GETTIMELEFT:
+	{
+		int time_left;
+		if (iTCO_wdt_get_timeleft(&time_left))
+			return -EINVAL;
+		return put_user(time_left, p);
+	}
+	default:
+		return -ENOTTY;
 	}
 }
 
@@ -594,12 +580,12 @@ static int iTCO_wdt_ioctl (struct inode *inode, struct file *file,
  */
 
 static const struct file_operations iTCO_wdt_fops = {
-	.owner =	THIS_MODULE,
-	.llseek =	no_llseek,
-	.write =	iTCO_wdt_write,
-	.ioctl =	iTCO_wdt_ioctl,
-	.open =		iTCO_wdt_open,
-	.release =	iTCO_wdt_release,
+	.owner =		THIS_MODULE,
+	.llseek =		no_llseek,
+	.write =		iTCO_wdt_write,
+	.unlocked_ioctl =	iTCO_wdt_ioctl,
+	.open =			iTCO_wdt_open,
+	.release =		iTCO_wdt_release,
 };
 
 static struct miscdevice iTCO_wdt_miscdev = {
@@ -612,7 +598,8 @@ static struct miscdevice iTCO_wdt_miscdev = {
  *	Init & exit routines
  */
 
-static int __devinit iTCO_wdt_init(struct pci_dev *pdev, const struct pci_device_id *ent, struct platform_device *dev)
+static int __devinit iTCO_wdt_init(struct pci_dev *pdev,
+		const struct pci_device_id *ent, struct platform_device *dev)
 {
 	int ret;
 	u32 base_address;
@@ -632,17 +619,19 @@ static int __devinit iTCO_wdt_init(struct pci_dev *pdev, const struct pci_device
 		pci_dev_put(pdev);
 		return -ENODEV;
 	}
-	iTCO_wdt_private.iTCO_version = iTCO_chipset_info[ent->driver_data].iTCO_version;
+	iTCO_wdt_private.iTCO_version =
+			iTCO_chipset_info[ent->driver_data].iTCO_version;
 	iTCO_wdt_private.ACPIBASE = base_address;
 	iTCO_wdt_private.pdev = pdev;
 
-	/* Get the Memory-Mapped GCS register, we need it for the NO_REBOOT flag (TCO v2) */
-	/* To get access to it you have to read RCBA from PCI Config space 0xf0
-	   and use it as base. GCS = RCBA + ICH6_GCS(0x3410). */
+	/* Get the Memory-Mapped GCS register, we need it for the
+	   NO_REBOOT flag (TCO v2). To get access to it you have to
+	   read RCBA from PCI Config space 0xf0 and use it as base.
+	   GCS = RCBA + ICH6_GCS(0x3410). */
 	if (iTCO_wdt_private.iTCO_version == 2) {
 		pci_read_config_dword(pdev, 0xf0, &base_address);
 		RCBA = base_address & 0xffffc000;
-		iTCO_wdt_private.gcs = ioremap((RCBA + 0x3410),4);
+		iTCO_wdt_private.gcs = ioremap((RCBA + 0x3410), 4);
 	}
 
 	/* Check chipset's NO_REBOOT bit */
@@ -657,8 +646,8 @@ static int __devinit iTCO_wdt_init(struct pci_dev *pdev, const struct pci_device
 
 	/* Set the TCO_EN bit in SMI_EN register */
 	if (!request_region(SMI_EN, 4, "iTCO_wdt")) {
-		printk(KERN_ERR PFX "I/O address 0x%04lx already in use\n",
-			SMI_EN );
+		printk(KERN_ERR PFX
+			"I/O address 0x%04lx already in use\n", SMI_EN);
 		ret = -EIO;
 		goto out;
 	}
@@ -667,18 +656,20 @@ static int __devinit iTCO_wdt_init(struct pci_dev *pdev, const struct pci_device
 	outl(val32, SMI_EN);
 	release_region(SMI_EN, 4);
 
-	/* The TCO I/O registers reside in a 32-byte range pointed to by the TCOBASE value */
-	if (!request_region (TCOBASE, 0x20, "iTCO_wdt")) {
-		printk (KERN_ERR PFX "I/O address 0x%04lx already in use\n",
+	/* The TCO I/O registers reside in a 32-byte range pointed to
+	   by the TCOBASE value */
+	if (!request_region(TCOBASE, 0x20, "iTCO_wdt")) {
+		printk(KERN_ERR PFX "I/O address 0x%04lx already in use\n",
 			TCOBASE);
 		ret = -EIO;
 		goto out;
 	}
 
-	printk(KERN_INFO PFX "Found a %s TCO device (Version=%d, TCOBASE=0x%04lx)\n",
-		iTCO_chipset_info[ent->driver_data].name,
-		iTCO_chipset_info[ent->driver_data].iTCO_version,
-		TCOBASE);
+	printk(KERN_INFO PFX
+		"Found a %s TCO device (Version=%d, TCOBASE=0x%04lx)\n",
+			iTCO_chipset_info[ent->driver_data].name,
+			iTCO_chipset_info[ent->driver_data].iTCO_version,
+			TCOBASE);
 
 	/* Clear out the (probably old) status */
 	outb(0, TCO1_STS);
@@ -687,27 +678,29 @@ static int __devinit iTCO_wdt_init(struct pci_dev *pdev, const struct pci_device
 	/* Make sure the watchdog is not running */
 	iTCO_wdt_stop();
 
-	/* Check that the heartbeat value is within it's range ; if not reset to the default */
+	/* Check that the heartbeat value is within it's range;
+	   if not reset to the default */
 	if (iTCO_wdt_set_heartbeat(heartbeat)) {
 		iTCO_wdt_set_heartbeat(WATCHDOG_HEARTBEAT);
-		printk(KERN_INFO PFX "heartbeat value must be 2<heartbeat<39 (TCO v1) or 613 (TCO v2), using %d\n",
-			heartbeat);
+		printk(KERN_INFO PFX "heartbeat value must be 2 < heartbeat < 39 (TCO v1) or 613 (TCO v2), using %d\n",
+							heartbeat);
 	}
 
 	ret = misc_register(&iTCO_wdt_miscdev);
 	if (ret != 0) {
-		printk(KERN_ERR PFX "cannot register miscdev on minor=%d (err=%d)\n",
-			WATCHDOG_MINOR, ret);
+		printk(KERN_ERR PFX
+			"cannot register miscdev on minor=%d (err=%d)\n",
+							WATCHDOG_MINOR, ret);
 		goto unreg_region;
 	}
 
-	printk (KERN_INFO PFX "initialized. heartbeat=%d sec (nowayout=%d)\n",
-		heartbeat, nowayout);
+	printk(KERN_INFO PFX "initialized. heartbeat=%d sec (nowayout=%d)\n",
+							heartbeat, nowayout);
 
 	return 0;
 
 unreg_region:
-	release_region (TCOBASE, 0x20);
+	release_region(TCOBASE, 0x20);
 out:
 	if (iTCO_wdt_private.iTCO_version == 2)
 		iounmap(iTCO_wdt_private.gcs);
@@ -796,7 +789,8 @@ static int __init iTCO_wdt_init_module(void)
 	if (err)
 		return err;
 
-	iTCO_wdt_platform_device = platform_device_register_simple(DRV_NAME, -1, NULL, 0);
+	iTCO_wdt_platform_device = platform_device_register_simple(DRV_NAME,
+								-1, NULL, 0);
 	if (IS_ERR(iTCO_wdt_platform_device)) {
 		err = PTR_ERR(iTCO_wdt_platform_device);
 		goto unreg_platform_driver;
diff --git a/drivers/watchdog/ib700wdt.c b/drivers/watchdog/ib700wdt.c
index 4b89f401691a..05a28106e8eb 100644
--- a/drivers/watchdog/ib700wdt.c
+++ b/drivers/watchdog/ib700wdt.c
@@ -41,9 +41,9 @@
 #include <linux/spinlock.h>
 #include <linux/moduleparam.h>
 #include <linux/platform_device.h>
+#include <linux/io.h>
+#include <linux/uaccess.h>
 
-#include <asm/io.h>
-#include <asm/uaccess.h>
 #include <asm/system.h>
 
 static struct platform_device *ibwdt_platform_device;
@@ -120,15 +120,16 @@ static int wd_margin = WD_TIMO;
 
 static int nowayout = WATCHDOG_NOWAYOUT;
 module_param(nowayout, int, 0);
-MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=" __MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
+MODULE_PARM_DESC(nowayout,
+		"Watchdog cannot be stopped once started (default="
+				__MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
 
 
 /*
  *	Watchdog Operations
  */
 
-static void
-ibwdt_ping(void)
+static void ibwdt_ping(void)
 {
 	spin_lock(&ibwdt_lock);
 
@@ -138,16 +139,14 @@ ibwdt_ping(void)
 	spin_unlock(&ibwdt_lock);
 }
 
-static void
-ibwdt_disable(void)
+static void ibwdt_disable(void)
 {
 	spin_lock(&ibwdt_lock);
 	outb_p(0, WDT_STOP);
 	spin_unlock(&ibwdt_lock);
 }
 
-static int
-ibwdt_set_heartbeat(int t)
+static int ibwdt_set_heartbeat(int t)
 {
 	int i;
 
@@ -165,8 +164,8 @@ ibwdt_set_heartbeat(int t)
  *	/dev/watchdog handling
  */
 
-static ssize_t
-ibwdt_write(struct file *file, const char __user *buf, size_t count, loff_t *ppos)
+static ssize_t ibwdt_write(struct file *file, const char __user *buf,
+						size_t count, loff_t *ppos)
 {
 	if (count) {
 		if (!nowayout) {
@@ -188,77 +187,71 @@ ibwdt_write(struct file *file, const char __user *buf, size_t count, loff_t *ppo
 	return count;
 }
 
-static int
-ibwdt_ioctl(struct inode *inode, struct file *file, unsigned int cmd,
-	  unsigned long arg)
+static long ibwdt_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
 {
 	int new_margin;
 	void __user *argp = (void __user *)arg;
 	int __user *p = argp;
 
 	static struct watchdog_info ident = {
-		.options = WDIOF_KEEPALIVEPING | WDIOF_SETTIMEOUT | WDIOF_MAGICCLOSE,
+		.options = WDIOF_KEEPALIVEPING | WDIOF_SETTIMEOUT
+							| WDIOF_MAGICCLOSE,
 		.firmware_version = 1,
 		.identity = "IB700 WDT",
 	};
 
 	switch (cmd) {
 	case WDIOC_GETSUPPORT:
-	  if (copy_to_user(argp, &ident, sizeof(ident)))
-	    return -EFAULT;
-	  break;
+		if (copy_to_user(argp, &ident, sizeof(ident)))
+			return -EFAULT;
+		break;
 
 	case WDIOC_GETSTATUS:
 	case WDIOC_GETBOOTSTATUS:
-	  return put_user(0, p);
-
-	case WDIOC_KEEPALIVE:
-	  ibwdt_ping();
-	  break;
-
-	case WDIOC_SETTIMEOUT:
-	  if (get_user(new_margin, p))
-		  return -EFAULT;
-	  if (ibwdt_set_heartbeat(new_margin))
-		  return -EINVAL;
-	  ibwdt_ping();
-	  /* Fall */
-
-	case WDIOC_GETTIMEOUT:
-	  return put_user(wd_times[wd_margin], p);
+		return put_user(0, p);
 
 	case WDIOC_SETOPTIONS:
 	{
-	  int options, retval = -EINVAL;
+		int options, retval = -EINVAL;
 
-	  if (get_user(options, p))
-	    return -EFAULT;
+		if (get_user(options, p))
+			return -EFAULT;
 
-	  if (options & WDIOS_DISABLECARD) {
-	    ibwdt_disable();
-	    retval = 0;
-	  }
+		if (options & WDIOS_DISABLECARD) {
+			ibwdt_disable();
+			retval = 0;
+		}
+		if (options & WDIOS_ENABLECARD) {
+			ibwdt_ping();
+			retval = 0;
+		}
+		return retval;
+	}
+	case WDIOC_KEEPALIVE:
+		ibwdt_ping();
+		break;
 
-	  if (options & WDIOS_ENABLECARD) {
-	    ibwdt_ping();
-	    retval = 0;
-	  }
+	case WDIOC_SETTIMEOUT:
+		if (get_user(new_margin, p))
+			return -EFAULT;
+		if (ibwdt_set_heartbeat(new_margin))
+			return -EINVAL;
+		ibwdt_ping();
+		/* Fall */
 
-	  return retval;
-	}
+	case WDIOC_GETTIMEOUT:
+		return put_user(wd_times[wd_margin], p);
 
 	default:
-	  return -ENOTTY;
+		return -ENOTTY;
 	}
 	return 0;
 }
 
-static int
-ibwdt_open(struct inode *inode, struct file *file)
+static int ibwdt_open(struct inode *inode, struct file *file)
 {
-	if (test_and_set_bit(0, &ibwdt_is_open)) {
+	if (test_and_set_bit(0, &ibwdt_is_open))
 		return -EBUSY;
-	}
 	if (nowayout)
 		__module_get(THIS_MODULE);
 
@@ -267,13 +260,13 @@ ibwdt_open(struct inode *inode, struct file *file)
 	return nonseekable_open(inode, file);
 }
 
-static int
-ibwdt_close(struct inode *inode, struct file *file)
+static int ibwdt_close(struct inode *inode, struct file *file)
 {
 	if (expect_close == 42) {
 		ibwdt_disable();
 	} else {
-		printk(KERN_CRIT PFX "WDT device closed unexpectedly.  WDT will not stop!\n");
+		printk(KERN_CRIT PFX
+		     "WDT device closed unexpectedly.  WDT will not stop!\n");
 		ibwdt_ping();
 	}
 	clear_bit(0, &ibwdt_is_open);
@@ -289,7 +282,7 @@ static const struct file_operations ibwdt_fops = {
 	.owner		= THIS_MODULE,
 	.llseek		= no_llseek,
 	.write		= ibwdt_write,
-	.ioctl		= ibwdt_ioctl,
+	.unlocked_ioctl	= ibwdt_ioctl,
 	.open		= ibwdt_open,
 	.release	= ibwdt_close,
 };
@@ -310,21 +303,23 @@ static int __devinit ibwdt_probe(struct platform_device *dev)
 
 #if WDT_START != WDT_STOP
 	if (!request_region(WDT_STOP, 1, "IB700 WDT")) {
-		printk (KERN_ERR PFX "STOP method I/O %X is not available.\n", WDT_STOP);
+		printk(KERN_ERR PFX "STOP method I/O %X is not available.\n",
+								WDT_STOP);
 		res = -EIO;
 		goto out_nostopreg;
 	}
 #endif
 
 	if (!request_region(WDT_START, 1, "IB700 WDT")) {
-		printk (KERN_ERR PFX "START method I/O %X is not available.\n", WDT_START);
+		printk(KERN_ERR PFX "START method I/O %X is not available.\n",
+								WDT_START);
 		res = -EIO;
 		goto out_nostartreg;
 	}
 
 	res = misc_register(&ibwdt_miscdev);
 	if (res) {
-		printk (KERN_ERR PFX "failed to register misc device\n");
+		printk(KERN_ERR PFX "failed to register misc device\n");
 		goto out_nomisc;
 	}
 	return 0;
@@ -342,9 +337,9 @@ out_nostopreg:
 static int __devexit ibwdt_remove(struct platform_device *dev)
 {
 	misc_deregister(&ibwdt_miscdev);
-	release_region(WDT_START,1);
+	release_region(WDT_START, 1);
 #if WDT_START != WDT_STOP
-	release_region(WDT_STOP,1);
+	release_region(WDT_STOP, 1);
 #endif
 	return 0;
 }
@@ -369,13 +364,15 @@ static int __init ibwdt_init(void)
 {
 	int err;
 
-	printk(KERN_INFO PFX "WDT driver for IB700 single board computer initialising.\n");
+	printk(KERN_INFO PFX
+		"WDT driver for IB700 single board computer initialising.\n");
 
 	err = platform_driver_register(&ibwdt_driver);
 	if (err)
 		return err;
 
-	ibwdt_platform_device = platform_device_register_simple(DRV_NAME, -1, NULL, 0);
+	ibwdt_platform_device = platform_device_register_simple(DRV_NAME,
+								-1, NULL, 0);
 	if (IS_ERR(ibwdt_platform_device)) {
 		err = PTR_ERR(ibwdt_platform_device);
 		goto unreg_platform_driver;
diff --git a/drivers/watchdog/ibmasr.c b/drivers/watchdog/ibmasr.c
index 94155f6136c2..b82405cfb4cd 100644
--- a/drivers/watchdog/ibmasr.c
+++ b/drivers/watchdog/ibmasr.c
@@ -19,9 +19,8 @@
 #include <linux/miscdevice.h>
 #include <linux/watchdog.h>
 #include <linux/dmi.h>
-
-#include <asm/io.h>
-#include <asm/uaccess.h>
+#include <linux/io.h>
+#include <linux/uaccess.h>
 
 
 enum {
@@ -70,10 +69,13 @@ static char asr_expect_close;
 static unsigned int asr_type, asr_base, asr_length;
 static unsigned int asr_read_addr, asr_write_addr;
 static unsigned char asr_toggle_mask, asr_disable_mask;
+static spinlock_t asr_lock;
 
-static void asr_toggle(void)
+static void __asr_toggle(void)
 {
-	unsigned char reg = inb(asr_read_addr);
+	unsigned char reg;
+
+	reg = inb(asr_read_addr);
 
 	outb(reg & ~asr_toggle_mask, asr_write_addr);
 	reg = inb(asr_read_addr);
@@ -83,12 +85,21 @@ static void asr_toggle(void)
 
 	outb(reg & ~asr_toggle_mask, asr_write_addr);
 	reg = inb(asr_read_addr);
+	spin_unlock(&asr_lock);
+}
+
+static void asr_toggle(void)
+{
+	spin_lock(&asr_lock);
+	__asr_toggle();
+	spin_unlock(&asr_lock);
 }
 
 static void asr_enable(void)
 {
 	unsigned char reg;
 
+	spin_lock(&asr_lock);
 	if (asr_type == ASMTYPE_TOPAZ) {
 		/* asr_write_addr == asr_read_addr */
 		reg = inb(asr_read_addr);
@@ -99,17 +110,21 @@ static void asr_enable(void)
 		 * First make sure the hardware timer is reset by toggling
 		 * ASR hardware timer line.
 		 */
-		asr_toggle();
+		__asr_toggle();
 
 		reg = inb(asr_read_addr);
 		outb(reg & ~asr_disable_mask, asr_write_addr);
 	}
 	reg = inb(asr_read_addr);
+	spin_unlock(&asr_lock);
 }
 
 static void asr_disable(void)
 {
-	unsigned char reg = inb(asr_read_addr);
+	unsigned char reg;
+
+	spin_lock(&asr_lock);
+	reg = inb(asr_read_addr);
 
 	if (asr_type == ASMTYPE_TOPAZ)
 		/* asr_write_addr == asr_read_addr */
@@ -122,6 +137,7 @@ static void asr_disable(void)
 		outb(reg | asr_disable_mask, asr_write_addr);
 	}
 	reg = inb(asr_read_addr);
+	spin_unlock(&asr_lock);
 }
 
 static int __init asr_get_base_address(void)
@@ -133,7 +149,8 @@ static int __init asr_get_base_address(void)
 
 	switch (asr_type) {
 	case ASMTYPE_TOPAZ:
-		/* SELECT SuperIO CHIP FOR QUERYING (WRITE 0x07 TO BOTH 0x2E and 0x2F) */
+		/* SELECT SuperIO CHIP FOR QUERYING
+		   (WRITE 0x07 TO BOTH 0x2E and 0x2F) */
 		outb(0x07, 0x2e);
 		outb(0x07, 0x2f);
 
@@ -154,14 +171,26 @@ static int __init asr_get_base_address(void)
 
 	case ASMTYPE_JASPER:
 		type = "Jaspers ";
-
-		/* FIXME: need to use pci_config_lock here, but it's not exported */
+#if 0
+		u32 r;
+		/* Suggested fix */
+		pdev = pci_get_bus_and_slot(0, DEVFN(0x1f, 0));
+		if (pdev == NULL)
+			return -ENODEV;
+		pci_read_config_dword(pdev, 0x58, &r);
+		asr_base = r & 0xFFFE;
+		pci_dev_put(pdev);
+#else
+		/* FIXME: need to use pci_config_lock here,
+		   but it's not exported */
 
 /*		spin_lock_irqsave(&pci_config_lock, flags);*/
 
 		/* Select the SuperIO chip in the PCI I/O port register */
 		outl(0x8000f858, 0xcf8);
 
+		/* BUS 0, Slot 1F, fnc 0, offset 58 */
+
 		/*
 		 * Read the base address for the SuperIO chip.
 		 * Only the lower 16 bits are valid, but the address is word
@@ -170,7 +199,7 @@ static int __init asr_get_base_address(void)
 		asr_base = inl(0xcfc) & 0xfffe;
 
 /*		spin_unlock_irqrestore(&pci_config_lock, flags);*/
-
+#endif
 		asr_read_addr = asr_write_addr =
 			asr_base + JASPER_ASR_REG_OFFSET;
 		asr_toggle_mask = JASPER_ASR_TOGGLE_MASK;
@@ -241,66 +270,57 @@ static ssize_t asr_write(struct file *file, const char __user *buf,
 	return count;
 }
 
-static int asr_ioctl(struct inode *inode, struct file *file,
-		     unsigned int cmd, unsigned long arg)
+static long asr_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
 {
 	static const struct watchdog_info ident = {
-		.options =	WDIOF_KEEPALIVEPING | 
+		.options =	WDIOF_KEEPALIVEPING |
 				WDIOF_MAGICCLOSE,
-		.identity =	"IBM ASR"
+		.identity =	"IBM ASR",
 	};
 	void __user *argp = (void __user *)arg;
 	int __user *p = argp;
 	int heartbeat;
 
 	switch (cmd) {
-		case WDIOC_GETSUPPORT:
-			return copy_to_user(argp, &ident, sizeof(ident)) ?
-				-EFAULT : 0;
-
-		case WDIOC_GETSTATUS:
-		case WDIOC_GETBOOTSTATUS:
-			return put_user(0, p);
-
-		case WDIOC_KEEPALIVE:
+	case WDIOC_GETSUPPORT:
+		return copy_to_user(argp, &ident, sizeof(ident)) ? -EFAULT : 0;
+	case WDIOC_GETSTATUS:
+	case WDIOC_GETBOOTSTATUS:
+		return put_user(0, p);
+	case WDIOC_SETOPTIONS:
+	{
+		int new_options, retval = -EINVAL;
+		if (get_user(new_options, p))
+			return -EFAULT;
+		if (new_options & WDIOS_DISABLECARD) {
+			asr_disable();
+			retval = 0;
+		}
+		if (new_options & WDIOS_ENABLECARD) {
+			asr_enable();
 			asr_toggle();
-			return 0;
-
-		/*
-		 * The hardware has a fixed timeout value, so no WDIOC_SETTIMEOUT
-		 * and WDIOC_GETTIMEOUT always returns 256.
-		 */
-		case WDIOC_GETTIMEOUT:
-			heartbeat = 256;
-			return put_user(heartbeat, p);
-
-		case WDIOC_SETOPTIONS: {
-			int new_options, retval = -EINVAL;
-
-			if (get_user(new_options, p))
-				return -EFAULT;
-
-			if (new_options & WDIOS_DISABLECARD) {
-				asr_disable();
-				retval = 0;
-			}
-
-			if (new_options & WDIOS_ENABLECARD) {
-				asr_enable();
-				asr_toggle();
-				retval = 0;
-			}
-
-			return retval;
+			retval = 0;
 		}
+		return retval;
+	}
+	case WDIOC_KEEPALIVE:
+		asr_toggle();
+		return 0;
+	/*
+	 * The hardware has a fixed timeout value, so no WDIOC_SETTIMEOUT
+	 * and WDIOC_GETTIMEOUT always returns 256.
+	 */
+	case WDIOC_GETTIMEOUT:
+		heartbeat = 256;
+		return put_user(heartbeat, p);
+	default:
+		return -ENOTTY;
 	}
-
-	return -ENOTTY;
 }
 
 static int asr_open(struct inode *inode, struct file *file)
 {
-	if(test_and_set_bit(0, &asr_is_open))
+	if (test_and_set_bit(0, &asr_is_open))
 		return -EBUSY;
 
 	asr_toggle();
@@ -314,7 +334,8 @@ static int asr_release(struct inode *inode, struct file *file)
 	if (asr_expect_close == 42)
 		asr_disable();
 	else {
-		printk(KERN_CRIT PFX "unexpected close, not stopping watchdog!\n");
+		printk(KERN_CRIT PFX
+				"unexpected close, not stopping watchdog!\n");
 		asr_toggle();
 	}
 	clear_bit(0, &asr_is_open);
@@ -323,12 +344,12 @@ static int asr_release(struct inode *inode, struct file *file)
 }
 
 static const struct file_operations asr_fops = {
-	.owner =	THIS_MODULE,
-	.llseek	=	no_llseek,
-	.write =	asr_write,
-	.ioctl =	asr_ioctl,
-	.open =		asr_open,
-	.release =	asr_release,
+	.owner =		THIS_MODULE,
+	.llseek =		no_llseek,
+	.write =		asr_write,
+	.unlocked_ioctl =	asr_ioctl,
+	.open =			asr_open,
+	.release =		asr_release,
 };
 
 static struct miscdevice asr_miscdev = {
@@ -367,6 +388,8 @@ static int __init ibmasr_init(void)
 	if (!asr_type)
 		return -ENODEV;
 
+	spin_lock_init(&asr_lock);
+
 	rc = asr_get_base_address();
 	if (rc)
 		return rc;
@@ -395,7 +418,9 @@ module_init(ibmasr_init);
 module_exit(ibmasr_exit);
 
 module_param(nowayout, int, 0);
-MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=" __MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
+MODULE_PARM_DESC(nowayout,
+	"Watchdog cannot be stopped once started (default="
+				__MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
 
 MODULE_DESCRIPTION("IBM Automatic Server Restart driver");
 MODULE_AUTHOR("Andrey Panin");
diff --git a/drivers/watchdog/indydog.c b/drivers/watchdog/indydog.c
index 788245bdaa7f..73c9e7992feb 100644
--- a/drivers/watchdog/indydog.c
+++ b/drivers/watchdog/indydog.c
@@ -1,7 +1,8 @@
 /*
  *	IndyDog	0.3	A Hardware Watchdog Device for SGI IP22
  *
- *	(c) Copyright 2002 Guido Guenther <agx@sigxcpu.org>, All Rights Reserved.
+ *	(c) Copyright 2002 Guido Guenther <agx@sigxcpu.org>,
+ *						All Rights Reserved.
  *
  *	This program is free software; you can redistribute it and/or
  *	modify it under the terms of the GNU General Public License
@@ -22,32 +23,42 @@
 #include <linux/notifier.h>
 #include <linux/reboot.h>
 #include <linux/init.h>
-#include <asm/uaccess.h>
+#include <linux/uaccess.h>
 #include <asm/sgi/mc.h>
 
 #define PFX "indydog: "
-static int indydog_alive;
+static unsigned long indydog_alive;
+static spinlock_t indydog_lock;
 
 #define WATCHDOG_TIMEOUT 30		/* 30 sec default timeout */
 
 static int nowayout = WATCHDOG_NOWAYOUT;
 module_param(nowayout, int, 0);
-MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=" __MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
+MODULE_PARM_DESC(nowayout,
+		"Watchdog cannot be stopped once started (default="
+				__MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
 
 static void indydog_start(void)
 {
-	u32 mc_ctrl0 = sgimc->cpuctrl0;
+	u32 mc_ctrl0;
 
+	spin_lock(&indydog_lock);
+	mc_ctrl0 = sgimc->cpuctrl0;
 	mc_ctrl0 = sgimc->cpuctrl0 | SGIMC_CCTRL0_WDOG;
 	sgimc->cpuctrl0 = mc_ctrl0;
+	spin_unlock(&indydog_lock);
 }
 
 static void indydog_stop(void)
 {
-	u32 mc_ctrl0 = sgimc->cpuctrl0;
+	u32 mc_ctrl0;
 
+	spin_lock(&indydog_lock);
+
+	mc_ctrl0 = sgimc->cpuctrl0;
 	mc_ctrl0 &= ~SGIMC_CCTRL0_WDOG;
 	sgimc->cpuctrl0 = mc_ctrl0;
+	spin_unlock(&indydog_lock);
 
 	printk(KERN_INFO PFX "Stopped watchdog timer.\n");
 }
@@ -62,7 +73,7 @@ static void indydog_ping(void)
  */
 static int indydog_open(struct inode *inode, struct file *file)
 {
-	if (indydog_alive)
+	if (test_and_set_bit(0, &indydog_alive))
 		return -EBUSY;
 
 	if (nowayout)
@@ -84,23 +95,21 @@ static int indydog_release(struct inode *inode, struct file *file)
 	 * Lock it in if it's a module and we defined ...NOWAYOUT */
 	if (!nowayout)
 		indydog_stop();		/* Turn the WDT off */
-
-	indydog_alive = 0;
-
+	clear_bit(0, &indydog_alive);
 	return 0;
 }
 
-static ssize_t indydog_write(struct file *file, const char *data, size_t len, loff_t *ppos)
+static ssize_t indydog_write(struct file *file, const char *data,
+						size_t len, loff_t *ppos)
 {
 	/* Refresh the timer. */
-	if (len) {
+	if (len)
 		indydog_ping();
-	}
 	return len;
 }
 
-static int indydog_ioctl(struct inode *inode, struct file *file,
-	unsigned int cmd, unsigned long arg)
+static long indydog_ioctl(struct file *file, unsigned int cmd,
+							unsigned long arg)
 {
 	int options, retval = -EINVAL;
 	static struct watchdog_info ident = {
@@ -111,42 +120,40 @@ static int indydog_ioctl(struct inode *inode, struct file *file,
 	};
 
 	switch (cmd) {
-		default:
-			return -ENOTTY;
-		case WDIOC_GETSUPPORT:
-			if (copy_to_user((struct watchdog_info *)arg,
-					 &ident, sizeof(ident)))
-				return -EFAULT;
-			return 0;
-		case WDIOC_GETSTATUS:
-		case WDIOC_GETBOOTSTATUS:
-			return put_user(0,(int *)arg);
-		case WDIOC_KEEPALIVE:
-			indydog_ping();
-			return 0;
-		case WDIOC_GETTIMEOUT:
-			return put_user(WATCHDOG_TIMEOUT,(int *)arg);
-		case WDIOC_SETOPTIONS:
-		{
-			if (get_user(options, (int *)arg))
-				return -EFAULT;
-
-			if (options & WDIOS_DISABLECARD) {
-				indydog_stop();
-				retval = 0;
-			}
-
-			if (options & WDIOS_ENABLECARD) {
-				indydog_start();
-				retval = 0;
-			}
-
-			return retval;
+	case WDIOC_GETSUPPORT:
+		if (copy_to_user((struct watchdog_info *)arg,
+				 &ident, sizeof(ident)))
+			return -EFAULT;
+		return 0;
+	case WDIOC_GETSTATUS:
+	case WDIOC_GETBOOTSTATUS:
+		return put_user(0, (int *)arg);
+	case WDIOC_SETOPTIONS:
+	{
+		if (get_user(options, (int *)arg))
+			return -EFAULT;
+		if (options & WDIOS_DISABLECARD) {
+			indydog_stop();
+			retval = 0;
 		}
+		if (options & WDIOS_ENABLECARD) {
+			indydog_start();
+			retval = 0;
+		}
+		return retval;
+	}
+	case WDIOC_KEEPALIVE:
+		indydog_ping();
+		return 0;
+	case WDIOC_GETTIMEOUT:
+		return put_user(WATCHDOG_TIMEOUT, (int *)arg);
+	default:
+		return -ENOTTY;
 	}
 }
 
-static int indydog_notify_sys(struct notifier_block *this, unsigned long code, void *unused)
+static int indydog_notify_sys(struct notifier_block *this,
+					unsigned long code, void *unused)
 {
 	if (code == SYS_DOWN || code == SYS_HALT)
 		indydog_stop();		/* Turn the WDT off */
@@ -158,7 +165,7 @@ static const struct file_operations indydog_fops = {
 	.owner		= THIS_MODULE,
 	.llseek		= no_llseek,
 	.write		= indydog_write,
-	.ioctl		= indydog_ioctl,
+	.unlocked_ioctl	= indydog_ioctl,
 	.open		= indydog_open,
 	.release	= indydog_release,
 };
@@ -180,17 +187,20 @@ static int __init watchdog_init(void)
 {
 	int ret;
 
+	spin_lock_init(&indydog_lock);
+
 	ret = register_reboot_notifier(&indydog_notifier);
 	if (ret) {
-		printk(KERN_ERR PFX "cannot register reboot notifier (err=%d)\n",
-			ret);
+		printk(KERN_ERR PFX
+			"cannot register reboot notifier (err=%d)\n", ret);
 		return ret;
 	}
 
 	ret = misc_register(&indydog_miscdev);
 	if (ret) {
-		printk(KERN_ERR PFX "cannot register miscdev on minor=%d (err=%d)\n",
-			WATCHDOG_MINOR, ret);
+		printk(KERN_ERR PFX
+			"cannot register miscdev on minor=%d (err=%d)\n",
+							WATCHDOG_MINOR, ret);
 		unregister_reboot_notifier(&indydog_notifier);
 		return ret;
 	}
diff --git a/drivers/watchdog/iop_wdt.c b/drivers/watchdog/iop_wdt.c
index bbbd91af754d..96eb2cbe5874 100644
--- a/drivers/watchdog/iop_wdt.c
+++ b/drivers/watchdog/iop_wdt.c
@@ -32,11 +32,12 @@
 #include <linux/miscdevice.h>
 #include <linux/watchdog.h>
 #include <linux/uaccess.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 
 static int nowayout = WATCHDOG_NOWAYOUT;
 static unsigned long wdt_status;
 static unsigned long boot_status;
+static spinlock_t wdt_lock;
 
 #define WDT_IN_USE		0
 #define WDT_OK_TO_CLOSE		1
@@ -68,8 +69,10 @@ static void wdt_enable(void)
 	/* Arm and enable the Timer to starting counting down from 0xFFFF.FFFF
 	 * Takes approx. 10.7s to timeout
 	 */
+	spin_lock(&wdt_lock);
 	write_wdtcr(IOP_WDTCR_EN_ARM);
 	write_wdtcr(IOP_WDTCR_EN);
+	spin_unlock(&wdt_lock);
 }
 
 /* returns 0 if the timer was successfully disabled */
@@ -77,9 +80,11 @@ static int wdt_disable(void)
 {
 	/* Stop Counting */
 	if (wdt_supports_disable()) {
+		spin_lock(&wdt_lock);
 		write_wdtcr(IOP_WDTCR_DIS_ARM);
 		write_wdtcr(IOP_WDTCR_DIS);
 		clear_bit(WDT_ENABLED, &wdt_status);
+		spin_unlock(&wdt_lock);
 		printk(KERN_INFO "WATCHDOG: Disabled\n");
 		return 0;
 	} else
@@ -92,16 +97,12 @@ static int iop_wdt_open(struct inode *inode, struct file *file)
 		return -EBUSY;
 
 	clear_bit(WDT_OK_TO_CLOSE, &wdt_status);
-
 	wdt_enable();
-
 	set_bit(WDT_ENABLED, &wdt_status);
-
 	return nonseekable_open(inode, file);
 }
 
-static ssize_t
-iop_wdt_write(struct file *file, const char *data, size_t len,
+static ssize_t iop_wdt_write(struct file *file, const char *data, size_t len,
 		  loff_t *ppos)
 {
 	if (len) {
@@ -121,46 +122,35 @@ iop_wdt_write(struct file *file, const char *data, size_t len,
 		}
 		wdt_enable();
 	}
-
 	return len;
 }
 
-static struct watchdog_info ident = {
+static const struct watchdog_info ident = {
 	.options = WDIOF_CARDRESET | WDIOF_MAGICCLOSE | WDIOF_KEEPALIVEPING,
 	.identity = "iop watchdog",
 };
 
-static int
-iop_wdt_ioctl(struct inode *inode, struct file *file, unsigned int cmd,
-		  unsigned long arg)
+static long iop_wdt_ioctl(struct file *file,
+				unsigned int cmd, unsigned long arg)
 {
 	int options;
 	int ret = -ENOTTY;
+	int __user *argp = (int __user *)arg;
 
 	switch (cmd) {
 	case WDIOC_GETSUPPORT:
-		if (copy_to_user
-		    ((struct watchdog_info *)arg, &ident, sizeof ident))
+		if (copy_to_user(argp, &ident, sizeof ident))
 			ret = -EFAULT;
 		else
 			ret = 0;
 		break;
 
 	case WDIOC_GETSTATUS:
-		ret = put_user(0, (int *)arg);
+		ret = put_user(0, argp);
 		break;
 
 	case WDIOC_GETBOOTSTATUS:
-		ret = put_user(boot_status, (int *)arg);
-		break;
-
-	case WDIOC_GETTIMEOUT:
-		ret = put_user(iop_watchdog_timeout(), (int *)arg);
-		break;
-
-	case WDIOC_KEEPALIVE:
-		wdt_enable();
-		ret = 0;
+		ret = put_user(boot_status, argp);
 		break;
 
 	case WDIOC_SETOPTIONS:
@@ -177,14 +167,21 @@ iop_wdt_ioctl(struct inode *inode, struct file *file, unsigned int cmd,
 			} else
 				ret = 0;
 		}
-
 		if (options & WDIOS_ENABLECARD) {
 			wdt_enable();
 			ret = 0;
 		}
 		break;
-	}
 
+	case WDIOC_KEEPALIVE:
+		wdt_enable();
+		ret = 0;
+		break;
+
+	case WDIOC_GETTIMEOUT:
+		ret = put_user(iop_watchdog_timeout(), argp);
+		break;
+	}
 	return ret;
 }
 
@@ -214,7 +211,7 @@ static const struct file_operations iop_wdt_fops = {
 	.owner = THIS_MODULE,
 	.llseek = no_llseek,
 	.write = iop_wdt_write,
-	.ioctl = iop_wdt_ioctl,
+	.unlocked_ioctl = iop_wdt_ioctl,
 	.open = iop_wdt_open,
 	.release = iop_wdt_release,
 };
@@ -229,10 +226,8 @@ static int __init iop_wdt_init(void)
 {
 	int ret;
 
-	ret = misc_register(&iop_wdt_miscdev);
-	if (ret == 0)
-		printk("iop watchdog timer: timeout %lu sec\n",
-		       iop_watchdog_timeout());
+	spin_lock_init(&wdt_lock);
+
 
 	/* check if the reset was caused by the watchdog timer */
 	boot_status = (read_rcsr() & IOP_RCSR_WDT) ? WDIOF_CARDRESET : 0;
@@ -242,6 +237,13 @@ static int __init iop_wdt_init(void)
 	 */
 	write_wdtsr(IOP13XX_WDTCR_IB_RESET);
 
+	/* Register after we have the device set up so we cannot race
+	   with an open */
+	ret = misc_register(&iop_wdt_miscdev);
+	if (ret == 0)
+		printk(KERN_INFO "iop watchdog timer: timeout %lu sec\n",
+		       iop_watchdog_timeout());
+
 	return ret;
 }
 
diff --git a/drivers/watchdog/it8712f_wdt.c b/drivers/watchdog/it8712f_wdt.c
index 445b7e812112..2270ee07c01b 100644
--- a/drivers/watchdog/it8712f_wdt.c
+++ b/drivers/watchdog/it8712f_wdt.c
@@ -30,9 +30,8 @@
 #include <linux/fs.h>
 #include <linux/pci.h>
 #include <linux/spinlock.h>
-
-#include <asm/uaccess.h>
-#include <asm/io.h>
+#include <linux/uaccess.h>
+#include <linux/io.h>
 
 #define NAME "it8712f_wdt"
 
@@ -50,7 +49,7 @@ static int nowayout = WATCHDOG_NOWAYOUT;
 module_param(nowayout, int, 0);
 MODULE_PARM_DESC(nowayout, "Disable watchdog shutdown on close");
 
-static struct semaphore it8712f_wdt_sem;
+static unsigned long wdt_open;
 static unsigned expect_close;
 static spinlock_t io_lock;
 static unsigned char revision;
@@ -86,22 +85,19 @@ static unsigned short address;
 #define WDT_OUT_PWROK	0x10
 #define WDT_OUT_KRST	0x40
 
-static int
-superio_inb(int reg)
+static int superio_inb(int reg)
 {
 	outb(reg, REG);
 	return inb(VAL);
 }
 
-static void
-superio_outb(int val, int reg)
+static void superio_outb(int val, int reg)
 {
 	outb(reg, REG);
 	outb(val, VAL);
 }
 
-static int
-superio_inw(int reg)
+static int superio_inw(int reg)
 {
 	int val;
 	outb(reg++, REG);
@@ -111,15 +107,13 @@ superio_inw(int reg)
 	return val;
 }
 
-static inline void
-superio_select(int ldn)
+static inline void superio_select(int ldn)
 {
 	outb(LDN, REG);
 	outb(ldn, VAL);
 }
 
-static inline void
-superio_enter(void)
+static inline void superio_enter(void)
 {
 	spin_lock(&io_lock);
 	outb(0x87, REG);
@@ -128,22 +122,19 @@ superio_enter(void)
 	outb(0x55, REG);
 }
 
-static inline void
-superio_exit(void)
+static inline void superio_exit(void)
 {
 	outb(0x02, REG);
 	outb(0x02, VAL);
 	spin_unlock(&io_lock);
 }
 
-static inline void
-it8712f_wdt_ping(void)
+static inline void it8712f_wdt_ping(void)
 {
 	inb(address);
 }
 
-static void
-it8712f_wdt_update_margin(void)
+static void it8712f_wdt_update_margin(void)
 {
 	int config = WDT_OUT_KRST | WDT_OUT_PWROK;
 	int units = margin;
@@ -165,8 +156,7 @@ it8712f_wdt_update_margin(void)
 	superio_outb(units, WDT_TIMEOUT);
 }
 
-static int
-it8712f_wdt_get_status(void)
+static int it8712f_wdt_get_status(void)
 {
 	if (superio_inb(WDT_CONTROL) & 0x01)
 		return WDIOF_CARDRESET;
@@ -174,8 +164,7 @@ it8712f_wdt_get_status(void)
 		return 0;
 }
 
-static void
-it8712f_wdt_enable(void)
+static void it8712f_wdt_enable(void)
 {
 	printk(KERN_DEBUG NAME ": enabling watchdog timer\n");
 	superio_enter();
@@ -190,8 +179,7 @@ it8712f_wdt_enable(void)
 	it8712f_wdt_ping();
 }
 
-static void
-it8712f_wdt_disable(void)
+static void it8712f_wdt_disable(void)
 {
 	printk(KERN_DEBUG NAME ": disabling watchdog timer\n");
 
@@ -207,8 +195,7 @@ it8712f_wdt_disable(void)
 	superio_exit();
 }
 
-static int
-it8712f_wdt_notify(struct notifier_block *this,
+static int it8712f_wdt_notify(struct notifier_block *this,
 		    unsigned long code, void *unused)
 {
 	if (code == SYS_HALT || code == SYS_POWER_OFF)
@@ -222,9 +209,8 @@ static struct notifier_block it8712f_wdt_notifier = {
 	.notifier_call = it8712f_wdt_notify,
 };
 
-static ssize_t
-it8712f_wdt_write(struct file *file, const char __user *data,
-	size_t len, loff_t *ppos)
+static ssize_t it8712f_wdt_write(struct file *file, const char __user *data,
+					size_t len, loff_t *ppos)
 {
 	/* check for a magic close character */
 	if (len) {
@@ -235,7 +221,7 @@ it8712f_wdt_write(struct file *file, const char __user *data,
 		expect_close = 0;
 		for (i = 0; i < len; ++i) {
 			char c;
-			if (get_user(c, data+i))
+			if (get_user(c, data + i))
 				return -EFAULT;
 			if (c == 'V')
 				expect_close = 42;
@@ -245,9 +231,8 @@ it8712f_wdt_write(struct file *file, const char __user *data,
 	return len;
 }
 
-static int
-it8712f_wdt_ioctl(struct inode *inode, struct file *file,
-	unsigned int cmd, unsigned long arg)
+static long it8712f_wdt_ioctl(struct file *file, unsigned int cmd,
+							unsigned long arg)
 {
 	void __user *argp = (void __user *)arg;
 	int __user *p = argp;
@@ -259,8 +244,6 @@ it8712f_wdt_ioctl(struct inode *inode, struct file *file,
 	int value;
 
 	switch (cmd) {
-	default:
-		return -ENOTTY;
 	case WDIOC_GETSUPPORT:
 		if (copy_to_user(argp, &ident, sizeof(ident)))
 			return -EFAULT;
@@ -299,22 +282,21 @@ it8712f_wdt_ioctl(struct inode *inode, struct file *file,
 		if (put_user(margin, p))
 			return -EFAULT;
 		return 0;
+	default:
+		return -ENOTTY;
 	}
 }
 
-static int
-it8712f_wdt_open(struct inode *inode, struct file *file)
+static int it8712f_wdt_open(struct inode *inode, struct file *file)
 {
 	/* only allow one at a time */
-	if (down_trylock(&it8712f_wdt_sem))
+	if (test_and_set_bit(0, &wdt_open))
 		return -EBUSY;
 	it8712f_wdt_enable();
-
 	return nonseekable_open(inode, file);
 }
 
-static int
-it8712f_wdt_release(struct inode *inode, struct file *file)
+static int it8712f_wdt_release(struct inode *inode, struct file *file)
 {
 	if (expect_close != 42) {
 		printk(KERN_WARNING NAME
@@ -324,7 +306,7 @@ it8712f_wdt_release(struct inode *inode, struct file *file)
 		it8712f_wdt_disable();
 	}
 	expect_close = 0;
-	up(&it8712f_wdt_sem);
+	clear_bit(0, &wdt_open);
 
 	return 0;
 }
@@ -333,7 +315,7 @@ static const struct file_operations it8712f_wdt_fops = {
 	.owner = THIS_MODULE,
 	.llseek = no_llseek,
 	.write = it8712f_wdt_write,
-	.ioctl = it8712f_wdt_ioctl,
+	.unlocked_ioctl = it8712f_wdt_ioctl,
 	.open = it8712f_wdt_open,
 	.release = it8712f_wdt_release,
 };
@@ -344,8 +326,7 @@ static struct miscdevice it8712f_wdt_miscdev = {
 	.fops = &it8712f_wdt_fops,
 };
 
-static int __init
-it8712f_wdt_find(unsigned short *address)
+static int __init it8712f_wdt_find(unsigned short *address)
 {
 	int err = -ENODEV;
 	int chip_type;
@@ -387,8 +368,7 @@ exit:
 	return err;
 }
 
-static int __init
-it8712f_wdt_init(void)
+static int __init it8712f_wdt_init(void)
 {
 	int err = 0;
 
@@ -404,8 +384,6 @@ it8712f_wdt_init(void)
 
 	it8712f_wdt_disable();
 
-	sema_init(&it8712f_wdt_sem, 1);
-
 	err = register_reboot_notifier(&it8712f_wdt_notifier);
 	if (err) {
 		printk(KERN_ERR NAME ": unable to register reboot notifier\n");
@@ -430,8 +408,7 @@ out:
 	return err;
 }
 
-static void __exit
-it8712f_wdt_exit(void)
+static void __exit it8712f_wdt_exit(void)
 {
 	misc_deregister(&it8712f_wdt_miscdev);
 	unregister_reboot_notifier(&it8712f_wdt_notifier);
diff --git a/drivers/watchdog/ixp2000_wdt.c b/drivers/watchdog/ixp2000_wdt.c
index dc7548dcaf35..4f4b35a20d84 100644
--- a/drivers/watchdog/ixp2000_wdt.c
+++ b/drivers/watchdog/ixp2000_wdt.c
@@ -25,42 +25,44 @@
 #include <linux/watchdog.h>
 #include <linux/init.h>
 #include <linux/bitops.h>
-
-#include <asm/hardware.h>
-#include <asm/uaccess.h>
+#include <linux/uaccess.h>
+#include <mach/hardware.h>
 
 static int nowayout = WATCHDOG_NOWAYOUT;
 static unsigned int heartbeat = 60;	/* (secs) Default is 1 minute */
 static unsigned long wdt_status;
+static spinlock_t wdt_lock;
 
 #define	WDT_IN_USE		0
 #define	WDT_OK_TO_CLOSE		1
 
 static unsigned long wdt_tick_rate;
 
-static void
-wdt_enable(void)
+static void wdt_enable(void)
 {
+	spin_lock(&wdt_lock);
 	ixp2000_reg_write(IXP2000_RESET0, *(IXP2000_RESET0) | WDT_RESET_ENABLE);
 	ixp2000_reg_write(IXP2000_TWDE, WDT_ENABLE);
 	ixp2000_reg_write(IXP2000_T4_CLD, heartbeat * wdt_tick_rate);
 	ixp2000_reg_write(IXP2000_T4_CTL, TIMER_DIVIDER_256 | TIMER_ENABLE);
+	spin_unlock(&wdt_lock);
 }
 
-static void
-wdt_disable(void)
+static void wdt_disable(void)
 {
+	spin_lock(&wdt_lock);
 	ixp2000_reg_write(IXP2000_T4_CTL, 0);
+	spin_unlock(&wdt_lock);
 }
 
-static void
-wdt_keepalive(void)
+static void wdt_keepalive(void)
 {
+	spin_lock(&wdt_lock);
 	ixp2000_reg_write(IXP2000_T4_CLD, heartbeat * wdt_tick_rate);
+	spin_unlock(&wdt_lock);
 }
 
-static int
-ixp2000_wdt_open(struct inode *inode, struct file *file)
+static int ixp2000_wdt_open(struct inode *inode, struct file *file)
 {
 	if (test_and_set_bit(WDT_IN_USE, &wdt_status))
 		return -EBUSY;
@@ -72,8 +74,8 @@ ixp2000_wdt_open(struct inode *inode, struct file *file)
 	return nonseekable_open(inode, file);
 }
 
-static ssize_t
-ixp2000_wdt_write(struct file *file, const char *data, size_t len, loff_t *ppos)
+static ssize_t ixp2000_wdt_write(struct file *file, const char *data,
+						size_t len, loff_t *ppos)
 {
 	if (len) {
 		if (!nowayout) {
@@ -103,9 +105,8 @@ static struct watchdog_info ident = {
 	.identity	= "IXP2000 Watchdog",
 };
 
-static int
-ixp2000_wdt_ioctl(struct inode *inode, struct file *file, unsigned int cmd,
-			unsigned long arg)
+static long ixp2000_wdt_ioctl(struct file *file, unsigned int cmd,
+							unsigned long arg)
 {
 	int ret = -ENOTTY;
 	int time;
@@ -124,6 +125,11 @@ ixp2000_wdt_ioctl(struct inode *inode, struct file *file, unsigned int cmd,
 		ret = put_user(0, (int *)arg);
 		break;
 
+	case WDIOC_KEEPALIVE:
+		wdt_enable();
+		ret = 0;
+		break;
+
 	case WDIOC_SETTIMEOUT:
 		ret = get_user(time, (int *)arg);
 		if (ret)
@@ -141,26 +147,18 @@ ixp2000_wdt_ioctl(struct inode *inode, struct file *file, unsigned int cmd,
 	case WDIOC_GETTIMEOUT:
 		ret = put_user(heartbeat, (int *)arg);
 		break;
-
-	case WDIOC_KEEPALIVE:
-		wdt_enable();
-		ret = 0;
-		break;
 	}
 
 	return ret;
 }
 
-static int
-ixp2000_wdt_release(struct inode *inode, struct file *file)
+static int ixp2000_wdt_release(struct inode *inode, struct file *file)
 {
-	if (test_bit(WDT_OK_TO_CLOSE, &wdt_status)) {
+	if (test_bit(WDT_OK_TO_CLOSE, &wdt_status))
 		wdt_disable();
-	} else {
+	else
 		printk(KERN_CRIT "WATCHDOG: Device closed unexpectedly - "
 					"timer will not stop\n");
-	}
-
 	clear_bit(WDT_IN_USE, &wdt_status);
 	clear_bit(WDT_OK_TO_CLOSE, &wdt_status);
 
@@ -168,18 +166,16 @@ ixp2000_wdt_release(struct inode *inode, struct file *file)
 }
 
 
-static const struct file_operations ixp2000_wdt_fops =
-{
+static const struct file_operations ixp2000_wdt_fops = {
 	.owner		= THIS_MODULE,
 	.llseek		= no_llseek,
 	.write		= ixp2000_wdt_write,
-	.ioctl		= ixp2000_wdt_ioctl,
+	.unlocked_ioctl	= ixp2000_wdt_ioctl,
 	.open		= ixp2000_wdt_open,
 	.release	= ixp2000_wdt_release,
 };
 
-static struct miscdevice ixp2000_wdt_miscdev =
-{
+static struct miscdevice ixp2000_wdt_miscdev = {
 	.minor		= WATCHDOG_MINOR,
 	.name		= "watchdog",
 	.fops		= &ixp2000_wdt_fops,
@@ -191,9 +187,8 @@ static int __init ixp2000_wdt_init(void)
 		printk(KERN_INFO "Unable to use IXP2000 watchdog due to IXP2800 erratum #25.\n");
 		return -EIO;
 	}
-
 	wdt_tick_rate = (*IXP2000_T1_CLD * HZ) / 256;
-
+	spin_lock_init(&wdt_lock);
 	return misc_register(&ixp2000_wdt_miscdev);
 }
 
diff --git a/drivers/watchdog/ixp4xx_wdt.c b/drivers/watchdog/ixp4xx_wdt.c
index 5864bb865cfe..8302ef005be7 100644
--- a/drivers/watchdog/ixp4xx_wdt.c
+++ b/drivers/watchdog/ixp4xx_wdt.c
@@ -22,48 +22,47 @@
 #include <linux/watchdog.h>
 #include <linux/init.h>
 #include <linux/bitops.h>
-
-#include <asm/hardware.h>
-#include <asm/uaccess.h>
+#include <linux/uaccess.h>
+#include <mach/hardware.h>
 
 static int nowayout = WATCHDOG_NOWAYOUT;
 static int heartbeat = 60;	/* (secs) Default is 1 minute */
 static unsigned long wdt_status;
 static unsigned long boot_status;
+static DEFINE_SPINLOCK(wdt_lock);
 
 #define WDT_TICK_RATE (IXP4XX_PERIPHERAL_BUS_CLOCK * 1000000UL)
 
 #define	WDT_IN_USE		0
 #define	WDT_OK_TO_CLOSE		1
 
-static void
-wdt_enable(void)
+static void wdt_enable(void)
 {
+	spin_lock(&wdt_lock);
 	*IXP4XX_OSWK = IXP4XX_WDT_KEY;
 	*IXP4XX_OSWE = 0;
 	*IXP4XX_OSWT = WDT_TICK_RATE * heartbeat;
 	*IXP4XX_OSWE = IXP4XX_WDT_COUNT_ENABLE | IXP4XX_WDT_RESET_ENABLE;
 	*IXP4XX_OSWK = 0;
+	spin_unlock(&wdt_lock);
 }
 
-static void
-wdt_disable(void)
+static void wdt_disable(void)
 {
+	spin_lock(&wdt_lock);
 	*IXP4XX_OSWK = IXP4XX_WDT_KEY;
 	*IXP4XX_OSWE = 0;
 	*IXP4XX_OSWK = 0;
+	spin_unlock(&wdt_lock);
 }
 
-static int
-ixp4xx_wdt_open(struct inode *inode, struct file *file)
+static int ixp4xx_wdt_open(struct inode *inode, struct file *file)
 {
 	if (test_and_set_bit(WDT_IN_USE, &wdt_status))
 		return -EBUSY;
 
 	clear_bit(WDT_OK_TO_CLOSE, &wdt_status);
-
 	wdt_enable();
-
 	return nonseekable_open(inode, file);
 }
 
@@ -87,7 +86,6 @@ ixp4xx_wdt_write(struct file *file, const char *data, size_t len, loff_t *ppos)
 		}
 		wdt_enable();
 	}
-
 	return len;
 }
 
@@ -98,9 +96,8 @@ static struct watchdog_info ident = {
 };
 
 
-static int
-ixp4xx_wdt_ioctl(struct inode *inode, struct file *file, unsigned int cmd,
-			unsigned long arg)
+static long ixp4xx_wdt_ioctl(struct file *file, unsigned int cmd,
+							unsigned long arg)
 {
 	int ret = -ENOTTY;
 	int time;
@@ -119,6 +116,11 @@ ixp4xx_wdt_ioctl(struct inode *inode, struct file *file, unsigned int cmd,
 		ret = put_user(boot_status, (int *)arg);
 		break;
 
+	case WDIOC_KEEPALIVE:
+		wdt_enable();
+		ret = 0;
+		break;
+
 	case WDIOC_SETTIMEOUT:
 		ret = get_user(time, (int *)arg);
 		if (ret)
@@ -136,25 +138,17 @@ ixp4xx_wdt_ioctl(struct inode *inode, struct file *file, unsigned int cmd,
 	case WDIOC_GETTIMEOUT:
 		ret = put_user(heartbeat, (int *)arg);
 		break;
-
-	case WDIOC_KEEPALIVE:
-		wdt_enable();
-		ret = 0;
-		break;
 	}
 	return ret;
 }
 
-static int
-ixp4xx_wdt_release(struct inode *inode, struct file *file)
+static int ixp4xx_wdt_release(struct inode *inode, struct file *file)
 {
-	if (test_bit(WDT_OK_TO_CLOSE, &wdt_status)) {
+	if (test_bit(WDT_OK_TO_CLOSE, &wdt_status))
 		wdt_disable();
-	} else {
+	else
 		printk(KERN_CRIT "WATCHDOG: Device closed unexpectedly - "
 					"timer will not stop\n");
-	}
-
 	clear_bit(WDT_IN_USE, &wdt_status);
 	clear_bit(WDT_OK_TO_CLOSE, &wdt_status);
 
@@ -162,18 +156,16 @@ ixp4xx_wdt_release(struct inode *inode, struct file *file)
 }
 
 
-static const struct file_operations ixp4xx_wdt_fops =
-{
+static const struct file_operations ixp4xx_wdt_fops = {
 	.owner		= THIS_MODULE,
 	.llseek		= no_llseek,
 	.write		= ixp4xx_wdt_write,
-	.ioctl		= ixp4xx_wdt_ioctl,
+	.unlocked_ioctl	= ixp4xx_wdt_ioctl,
 	.open		= ixp4xx_wdt_open,
 	.release	= ixp4xx_wdt_release,
 };
 
-static struct miscdevice ixp4xx_wdt_miscdev =
-{
+static struct miscdevice ixp4xx_wdt_miscdev = {
 	.minor		= WATCHDOG_MINOR,
 	.name		= "watchdog",
 	.fops		= &ixp4xx_wdt_fops,
@@ -186,19 +178,18 @@ static int __init ixp4xx_wdt_init(void)
 
 	asm("mrc p15, 0, %0, cr0, cr0, 0;" : "=r"(processor_id) :);
 	if (!(processor_id & 0xf) && !cpu_is_ixp46x()) {
-		printk("IXP4XXX Watchdog: Rev. A0 IXP42x CPU detected - "
-			"watchdog disabled\n");
+		printk(KERN_ERR "IXP4XXX Watchdog: Rev. A0 IXP42x CPU detected"
+			" - watchdog disabled\n");
 
 		return -ENODEV;
 	}
-
-	ret = misc_register(&ixp4xx_wdt_miscdev);
-	if (ret == 0)
-		printk("IXP4xx Watchdog Timer: heartbeat %d sec\n", heartbeat);
-
+	spin_lock_init(&wdt_lock);
 	boot_status = (*IXP4XX_OSST & IXP4XX_OSST_TIMER_WARM_RESET) ?
 			WDIOF_CARDRESET : 0;
-
+	ret = misc_register(&ixp4xx_wdt_miscdev);
+	if (ret == 0)
+		printk(KERN_INFO "IXP4xx Watchdog Timer: heartbeat %d sec\n",
+			heartbeat);
 	return ret;
 }
 
diff --git a/drivers/watchdog/ks8695_wdt.c b/drivers/watchdog/ks8695_wdt.c
index df5a6b811ccd..0b798fdaa378 100644
--- a/drivers/watchdog/ks8695_wdt.c
+++ b/drivers/watchdog/ks8695_wdt.c
@@ -19,10 +19,9 @@
 #include <linux/platform_device.h>
 #include <linux/types.h>
 #include <linux/watchdog.h>
-#include <asm/io.h>
-#include <asm/uaccess.h>
-#include <asm/arch/regs-timer.h>
-
+#include <linux/io.h>
+#include <linux/uaccess.h>
+#include <mach/regs-timer.h>
 
 #define WDT_DEFAULT_TIME	5	/* seconds */
 #define WDT_MAX_TIME		171	/* seconds */
@@ -31,38 +30,44 @@ static int wdt_time = WDT_DEFAULT_TIME;
 static int nowayout = WATCHDOG_NOWAYOUT;
 
 module_param(wdt_time, int, 0);
-MODULE_PARM_DESC(wdt_time, "Watchdog time in seconds. (default="__MODULE_STRING(WDT_DEFAULT_TIME) ")");
+MODULE_PARM_DESC(wdt_time, "Watchdog time in seconds. (default="
+					__MODULE_STRING(WDT_DEFAULT_TIME) ")");
 
 #ifdef CONFIG_WATCHDOG_NOWAYOUT
 module_param(nowayout, int, 0);
-MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=" __MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
+MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default="
+				__MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
 #endif
 
 
 static unsigned long ks8695wdt_busy;
+static spinlock_t ks8695_lock;
 
 /* ......................................................................... */
 
 /*
  * Disable the watchdog.
  */
-static void inline ks8695_wdt_stop(void)
+static inline void ks8695_wdt_stop(void)
 {
 	unsigned long tmcon;
 
+	spin_lock(&ks8695_lock);
 	/* disable timer0 */
 	tmcon = __raw_readl(KS8695_TMR_VA + KS8695_TMCON);
 	__raw_writel(tmcon & ~TMCON_T0EN, KS8695_TMR_VA + KS8695_TMCON);
+	spin_unlock(&ks8695_lock);
 }
 
 /*
  * Enable and reset the watchdog.
  */
-static void inline ks8695_wdt_start(void)
+static inline void ks8695_wdt_start(void)
 {
 	unsigned long tmcon;
 	unsigned long tval = wdt_time * CLOCK_TICK_RATE;
 
+	spin_lock(&ks8695_lock);
 	/* disable timer0 */
 	tmcon = __raw_readl(KS8695_TMR_VA + KS8695_TMCON);
 	__raw_writel(tmcon & ~TMCON_T0EN, KS8695_TMR_VA + KS8695_TMCON);
@@ -73,19 +78,22 @@ static void inline ks8695_wdt_start(void)
 	/* re-enable timer0 */
 	tmcon = __raw_readl(KS8695_TMR_VA + KS8695_TMCON);
 	__raw_writel(tmcon | TMCON_T0EN, KS8695_TMR_VA + KS8695_TMCON);
+	spin_unlock(&ks8695_lock);
 }
 
 /*
  * Reload the watchdog timer.  (ie, pat the watchdog)
  */
-static void inline ks8695_wdt_reload(void)
+static inline void ks8695_wdt_reload(void)
 {
 	unsigned long tmcon;
 
+	spin_lock(&ks8695_lock);
 	/* disable, then re-enable timer0 */
 	tmcon = __raw_readl(KS8695_TMR_VA + KS8695_TMCON);
 	__raw_writel(tmcon & ~TMCON_T0EN, KS8695_TMR_VA + KS8695_TMCON);
 	__raw_writel(tmcon | TMCON_T0EN, KS8695_TMR_VA + KS8695_TMCON);
+	spin_unlock(&ks8695_lock);
 }
 
 /*
@@ -102,7 +110,8 @@ static int ks8695_wdt_settimeout(int new_time)
 	if ((new_time <= 0) || (new_time > WDT_MAX_TIME))
 		return -EINVAL;
 
-	/* Set new watchdog time. It will be used when ks8695_wdt_start() is called. */
+	/* Set new watchdog time. It will be used when
+	   ks8695_wdt_start() is called. */
 	wdt_time = new_time;
 	return 0;
 }
@@ -128,9 +137,9 @@ static int ks8695_wdt_open(struct inode *inode, struct file *file)
  */
 static int ks8695_wdt_close(struct inode *inode, struct file *file)
 {
+	/* Disable the watchdog when file is closed */
 	if (!nowayout)
-		ks8695_wdt_stop();	/* Disable the watchdog when file is closed */
-
+		ks8695_wdt_stop();
 	clear_bit(0, &ks8695wdt_busy);
 	return 0;
 }
@@ -143,60 +152,52 @@ static struct watchdog_info ks8695_wdt_info = {
 /*
  * Handle commands from user-space.
  */
-static int ks8695_wdt_ioctl(struct inode *inode, struct file *file,
-		unsigned int cmd, unsigned long arg)
+static long ks8695_wdt_ioctl(struct file *file, unsigned int cmd,
+							unsigned long arg)
 {
 	void __user *argp = (void __user *)arg;
 	int __user *p = argp;
 	int new_value;
 
-	switch(cmd) {
-		case WDIOC_KEEPALIVE:
-			ks8695_wdt_reload();	/* pat the watchdog */
-			return 0;
-
-		case WDIOC_GETSUPPORT:
-			return copy_to_user(argp, &ks8695_wdt_info, sizeof(ks8695_wdt_info)) ? -EFAULT : 0;
-
-		case WDIOC_SETTIMEOUT:
-			if (get_user(new_value, p))
-				return -EFAULT;
-
-			if (ks8695_wdt_settimeout(new_value))
-				return -EINVAL;
-
-			/* Enable new time value */
+	switch (cmd) {
+	case WDIOC_GETSUPPORT:
+		return copy_to_user(argp, &ks8695_wdt_info,
+					sizeof(ks8695_wdt_info)) ? -EFAULT : 0;
+	case WDIOC_GETSTATUS:
+	case WDIOC_GETBOOTSTATUS:
+		return put_user(0, p);
+	case WDIOC_SETOPTIONS:
+		if (get_user(new_value, p))
+			return -EFAULT;
+		if (new_value & WDIOS_DISABLECARD)
+			ks8695_wdt_stop();
+		if (new_value & WDIOS_ENABLECARD)
 			ks8695_wdt_start();
-
-			/* Return current value */
-			return put_user(wdt_time, p);
-
-		case WDIOC_GETTIMEOUT:
-			return put_user(wdt_time, p);
-
-		case WDIOC_GETSTATUS:
-		case WDIOC_GETBOOTSTATUS:
-			return put_user(0, p);
-
-		case WDIOC_SETOPTIONS:
-			if (get_user(new_value, p))
-				return -EFAULT;
-
-			if (new_value & WDIOS_DISABLECARD)
-				ks8695_wdt_stop();
-			if (new_value & WDIOS_ENABLECARD)
-				ks8695_wdt_start();
-			return 0;
-
-		default:
-			return -ENOTTY;
+		return 0;
+	case WDIOC_KEEPALIVE:
+		ks8695_wdt_reload();	/* pat the watchdog */
+		return 0;
+	case WDIOC_SETTIMEOUT:
+		if (get_user(new_value, p))
+			return -EFAULT;
+		if (ks8695_wdt_settimeout(new_value))
+			return -EINVAL;
+		/* Enable new time value */
+		ks8695_wdt_start();
+		/* Return current value */
+		return put_user(wdt_time, p);
+	case WDIOC_GETTIMEOUT:
+		return put_user(wdt_time, p);
+	default:
+		return -ENOTTY;
 	}
 }
 
 /*
  * Pat the watchdog whenever device is written to.
  */
-static ssize_t ks8695_wdt_write(struct file *file, const char *data, size_t len, loff_t *ppos)
+static ssize_t ks8695_wdt_write(struct file *file, const char *data,
+						size_t len, loff_t *ppos)
 {
 	ks8695_wdt_reload();		/* pat the watchdog */
 	return len;
@@ -207,7 +208,7 @@ static ssize_t ks8695_wdt_write(struct file *file, const char *data, size_t len,
 static const struct file_operations ks8695wdt_fops = {
 	.owner		= THIS_MODULE,
 	.llseek		= no_llseek,
-	.ioctl		= ks8695_wdt_ioctl,
+	.unlocked_ioctl	= ks8695_wdt_ioctl,
 	.open		= ks8695_wdt_open,
 	.release	= ks8695_wdt_close,
 	.write		= ks8695_wdt_write,
@@ -231,7 +232,8 @@ static int __init ks8695wdt_probe(struct platform_device *pdev)
 	if (res)
 		return res;
 
-	printk("KS8695 Watchdog Timer enabled (%d seconds%s)\n", wdt_time, nowayout ? ", nowayout" : "");
+	printk(KERN_INFO "KS8695 Watchdog Timer enabled (%d seconds%s)\n",
+				wdt_time, nowayout ? ", nowayout" : "");
 	return 0;
 }
 
@@ -285,12 +287,14 @@ static struct platform_driver ks8695wdt_driver = {
 
 static int __init ks8695_wdt_init(void)
 {
-	/* Check that the heartbeat value is within range; if not reset to the default */
+	spin_lock_init(&ks8695_lock);
+	/* Check that the heartbeat value is within range;
+	   if not reset to the default */
 	if (ks8695_wdt_settimeout(wdt_time)) {
 		ks8695_wdt_settimeout(WDT_DEFAULT_TIME);
-		pr_info("ks8695_wdt: wdt_time value must be 1 <= wdt_time <= %i, using %d\n", wdt_time, WDT_MAX_TIME);
+		pr_info("ks8695_wdt: wdt_time value must be 1 <= wdt_time <= %i, using %d\n",
+							wdt_time, WDT_MAX_TIME);
 	}
-
 	return platform_driver_register(&ks8695wdt_driver);
 }
 
diff --git a/drivers/watchdog/machzwd.c b/drivers/watchdog/machzwd.c
index 6905135a776c..2dfc27559bf7 100644
--- a/drivers/watchdog/machzwd.c
+++ b/drivers/watchdog/machzwd.c
@@ -40,9 +40,9 @@
 #include <linux/notifier.h>
 #include <linux/reboot.h>
 #include <linux/init.h>
+#include <linux/io.h>
+#include <linux/uaccess.h>
 
-#include <asm/io.h>
-#include <asm/uaccess.h>
 #include <asm/system.h>
 
 /* ports */
@@ -95,7 +95,9 @@ MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR);
 
 static int nowayout = WATCHDOG_NOWAYOUT;
 module_param(nowayout, int, 0);
-MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=" __MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
+MODULE_PARM_DESC(nowayout,
+		"Watchdog cannot be stopped once started (default="
+				__MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
 
 #define PFX "machzwd"
 
@@ -114,7 +116,7 @@ static struct watchdog_info zf_info = {
  * 3 = GEN_SCI
  * defaults to GEN_RESET (0)
  */
-static int action = 0;
+static int action;
 module_param(action, int, 0);
 MODULE_PARM_DESC(action, "after watchdog resets, generate: 0 = RESET(*)  1 = SMI  2 = NMI  3 = SCI");
 
@@ -123,10 +125,9 @@ static void zf_ping(unsigned long data);
 static int zf_action = GEN_RESET;
 static unsigned long zf_is_open;
 static char zf_expect_close;
-static DEFINE_SPINLOCK(zf_lock);
 static DEFINE_SPINLOCK(zf_port_lock);
 static DEFINE_TIMER(zf_timer, zf_ping, 0, 0);
-static unsigned long next_heartbeat = 0;
+static unsigned long next_heartbeat;
 
 
 /* timeout for user land heart beat (10 seconds) */
@@ -171,13 +172,13 @@ static inline void zf_set_control(unsigned short new)
 
 static inline void zf_set_timer(unsigned short new, unsigned char n)
 {
-	switch(n){
-		case WD1:
-			zf_writew(COUNTER_1, new);
-		case WD2:
-			zf_writeb(COUNTER_2, new > 0xff ? 0xff : new);
-		default:
-			return;
+	switch (n) {
+	case WD1:
+		zf_writew(COUNTER_1, new);
+	case WD2:
+		zf_writeb(COUNTER_2, new > 0xff ? 0xff : new);
+	default:
+		return;
 	}
 }
 
@@ -241,10 +242,8 @@ static void zf_ping(unsigned long data)
 
 	zf_writeb(COUNTER_2, 0xff);
 
-	if(time_before(jiffies, next_heartbeat)){
-
+	if (time_before(jiffies, next_heartbeat)) {
 		dprintk("time_before: %ld\n", next_heartbeat - jiffies);
-
 		/*
 		 * reset event is activated by transition from 0 to 1 on
 		 * RESET_WD1 bit and we assume that it is already zero...
@@ -261,24 +260,21 @@ static void zf_ping(unsigned long data)
 		spin_unlock_irqrestore(&zf_port_lock, flags);
 
 		mod_timer(&zf_timer, jiffies + ZF_HW_TIMEO);
-	}else{
+	} else
 		printk(KERN_CRIT PFX ": I will reset your machine\n");
-	}
 }
 
 static ssize_t zf_write(struct file *file, const char __user *buf, size_t count,
 								loff_t *ppos)
 {
 	/* See if we got the magic character */
-	if(count){
-
+	if (count) {
 		/*
 		 * no need to check for close confirmation
 		 * no way to disable watchdog ;)
 		 */
 		if (!nowayout) {
 			size_t ofs;
-
 			/*
 			 * note: just in case someone wrote the magic character
 			 * five months ago...
@@ -286,11 +282,11 @@ static ssize_t zf_write(struct file *file, const char __user *buf, size_t count,
 			zf_expect_close = 0;
 
 			/* now scan */
-			for (ofs = 0; ofs != count; ofs++){
+			for (ofs = 0; ofs != count; ofs++) {
 				char c;
 				if (get_user(c, buf + ofs))
 					return -EFAULT;
-				if (c == 'V'){
+				if (c == 'V') {
 					zf_expect_close = 42;
 					dprintk("zf_expect_close = 42\n");
 				}
@@ -303,14 +299,11 @@ static ssize_t zf_write(struct file *file, const char __user *buf, size_t count,
 		 */
 		next_heartbeat = jiffies + ZF_USER_TIMEO;
 		dprintk("user ping at %ld\n", jiffies);
-
 	}
-
 	return count;
 }
 
-static int zf_ioctl(struct inode *inode, struct file *file, unsigned int cmd,
-	unsigned long arg)
+static long zf_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
 {
 	void __user *argp = (void __user *)arg;
 	int __user *p = argp;
@@ -319,55 +312,38 @@ static int zf_ioctl(struct inode *inode, struct file *file, unsigned int cmd,
 		if (copy_to_user(argp, &zf_info, sizeof(zf_info)))
 			return -EFAULT;
 		break;
-
 	case WDIOC_GETSTATUS:
 	case WDIOC_GETBOOTSTATUS:
 		return put_user(0, p);
-
 	case WDIOC_KEEPALIVE:
 		zf_ping(0);
 		break;
-
 	default:
 		return -ENOTTY;
 	}
-
 	return 0;
 }
 
 static int zf_open(struct inode *inode, struct file *file)
 {
-	spin_lock(&zf_lock);
-	if(test_and_set_bit(0, &zf_is_open)) {
-		spin_unlock(&zf_lock);
+	if (test_and_set_bit(0, &zf_is_open))
 		return -EBUSY;
-	}
-
 	if (nowayout)
 		__module_get(THIS_MODULE);
-
-	spin_unlock(&zf_lock);
-
 	zf_timer_on();
-
 	return nonseekable_open(inode, file);
 }
 
 static int zf_close(struct inode *inode, struct file *file)
 {
-	if(zf_expect_close == 42){
+	if (zf_expect_close == 42)
 		zf_timer_off();
-	} else {
+	else {
 		del_timer(&zf_timer);
 		printk(KERN_ERR PFX ": device file closed unexpectedly. Will not stop the WDT!\n");
 	}
-
-	spin_lock(&zf_lock);
 	clear_bit(0, &zf_is_open);
-	spin_unlock(&zf_lock);
-
 	zf_expect_close = 0;
-
 	return 0;
 }
 
@@ -378,23 +354,18 @@ static int zf_close(struct inode *inode, struct file *file)
 static int zf_notify_sys(struct notifier_block *this, unsigned long code,
 								void *unused)
 {
-	if(code == SYS_DOWN || code == SYS_HALT){
+	if (code == SYS_DOWN || code == SYS_HALT)
 		zf_timer_off();
-	}
-
 	return NOTIFY_DONE;
 }
 
-
-
-
 static const struct file_operations zf_fops = {
-	.owner          = THIS_MODULE,
-	.llseek         = no_llseek,
-	.write          = zf_write,
-	.ioctl          = zf_ioctl,
-	.open           = zf_open,
-	.release        = zf_close,
+	.owner		= THIS_MODULE,
+	.llseek		= no_llseek,
+	.write		= zf_write,
+	.unlocked_ioctl = zf_ioctl,
+	.open		= zf_open,
+	.release	= zf_close,
 };
 
 static struct miscdevice zf_miscdev = {
@@ -402,7 +373,7 @@ static struct miscdevice zf_miscdev = {
 	.name = "watchdog",
 	.fops = &zf_fops,
 };
- 
+
 
 /*
  * The device needs to learn about soft shutdowns in order to
@@ -423,22 +394,23 @@ static int __init zf_init(void)
 {
 	int ret;
 
-	printk(KERN_INFO PFX ": MachZ ZF-Logic Watchdog driver initializing.\n");
+	printk(KERN_INFO PFX
+		": MachZ ZF-Logic Watchdog driver initializing.\n");
 
 	ret = zf_get_ZFL_version();
-	if ((!ret) || (ret == 0xffff)) {
+	if (!ret || ret == 0xffff) {
 		printk(KERN_WARNING PFX ": no ZF-Logic found\n");
 		return -ENODEV;
 	}
 
-	if((action <= 3) && (action >= 0)){
-		zf_action = zf_action>>action;
-	} else
+	if (action <= 3 && action >= 0)
+		zf_action = zf_action >> action;
+	else
 		action = 0;
 
 	zf_show_action(action);
 
-	if(!request_region(ZF_IOBASE, 3, "MachZ ZFL WDT")){
+	if (!request_region(ZF_IOBASE, 3, "MachZ ZFL WDT")) {
 		printk(KERN_ERR "cannot reserve I/O ports at %d\n",
 							ZF_IOBASE);
 		ret = -EBUSY;
@@ -446,14 +418,14 @@ static int __init zf_init(void)
 	}
 
 	ret = register_reboot_notifier(&zf_notifier);
-	if(ret){
+	if (ret) {
 		printk(KERN_ERR "can't register reboot notifier (err=%d)\n",
 									ret);
 		goto no_reboot;
 	}
 
 	ret = misc_register(&zf_miscdev);
-	if (ret){
+	if (ret) {
 		printk(KERN_ERR "can't misc_register on minor=%d\n",
 							WATCHDOG_MINOR);
 		goto no_misc;
diff --git a/drivers/watchdog/mixcomwd.c b/drivers/watchdog/mixcomwd.c
index 1adf1d56027d..407b025cb104 100644
--- a/drivers/watchdog/mixcomwd.c
+++ b/drivers/watchdog/mixcomwd.c
@@ -29,7 +29,8 @@
  *		- support for one more type board
  *
  * Version 0.5 (2001/12/14) Matt Domsch <Matt_Domsch@dell.com>
- *		- added nowayout module option to override CONFIG_WATCHDOG_NOWAYOUT
+ *		- added nowayout module option to override
+ *		  CONFIG_WATCHDOG_NOWAYOUT
  *
  * Version 0.6 (2002/04/12): Rob Radez <rob@osinvestor.com>
  *		- make mixcomwd_opened unsigned,
@@ -53,8 +54,8 @@
 #include <linux/init.h>
 #include <linux/jiffies.h>
 #include <linux/timer.h>
-#include <asm/uaccess.h>
-#include <asm/io.h>
+#include <linux/uaccess.h>
+#include <linux/io.h>
 
 /*
  * We have two types of cards that can be probed:
@@ -108,18 +109,19 @@ static char expect_close;
 
 static int nowayout = WATCHDOG_NOWAYOUT;
 module_param(nowayout, int, 0);
-MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=" __MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
+MODULE_PARM_DESC(nowayout,
+		"Watchdog cannot be stopped once started (default="
+				__MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
 
 static void mixcomwd_ping(void)
 {
-	outb_p(55,watchdog_port);
+	outb_p(55, watchdog_port);
 	return;
 }
 
 static void mixcomwd_timerfun(unsigned long d)
 {
 	mixcomwd_ping();
-
 	mod_timer(&mixcomwd_timer, jiffies + 5 * HZ);
 }
 
@@ -129,22 +131,22 @@ static void mixcomwd_timerfun(unsigned long d)
 
 static int mixcomwd_open(struct inode *inode, struct file *file)
 {
-	if(test_and_set_bit(0,&mixcomwd_opened)) {
+	if (test_and_set_bit(0, &mixcomwd_opened))
 		return -EBUSY;
-	}
+
 	mixcomwd_ping();
 
-	if (nowayout) {
+	if (nowayout)
 		/*
 		 * fops_get() code via open() has already done
 		 * a try_module_get() so it is safe to do the
 		 * __module_get().
 		 */
 		__module_get(THIS_MODULE);
-	} else {
-		if(mixcomwd_timer_alive) {
+	else {
+		if (mixcomwd_timer_alive) {
 			del_timer(&mixcomwd_timer);
-			mixcomwd_timer_alive=0;
+			mixcomwd_timer_alive = 0;
 		}
 	}
 	return nonseekable_open(inode, file);
@@ -153,26 +155,27 @@ static int mixcomwd_open(struct inode *inode, struct file *file)
 static int mixcomwd_release(struct inode *inode, struct file *file)
 {
 	if (expect_close == 42) {
-		if(mixcomwd_timer_alive) {
-			printk(KERN_ERR PFX "release called while internal timer alive");
+		if (mixcomwd_timer_alive) {
+			printk(KERN_ERR PFX
+				"release called while internal timer alive");
 			return -EBUSY;
 		}
-		mixcomwd_timer_alive=1;
+		mixcomwd_timer_alive = 1;
 		mod_timer(&mixcomwd_timer, jiffies + 5 * HZ);
-	} else {
-		printk(KERN_CRIT PFX "WDT device closed unexpectedly.  WDT will not stop!\n");
-	}
+	} else
+		printk(KERN_CRIT PFX
+		    "WDT device closed unexpectedly.  WDT will not stop!\n");
 
-	clear_bit(0,&mixcomwd_opened);
-	expect_close=0;
+	clear_bit(0, &mixcomwd_opened);
+	expect_close = 0;
 	return 0;
 }
 
 
-static ssize_t mixcomwd_write(struct file *file, const char __user *data, size_t len, loff_t *ppos)
+static ssize_t mixcomwd_write(struct file *file, const char __user *data,
+						size_t len, loff_t *ppos)
 {
-	if(len)
-	{
+	if (len) {
 		if (!nowayout) {
 			size_t i;
 
@@ -192,8 +195,8 @@ static ssize_t mixcomwd_write(struct file *file, const char __user *data, size_t
 	return len;
 }
 
-static int mixcomwd_ioctl(struct inode *inode, struct file *file,
-	unsigned int cmd, unsigned long arg)
+static long mixcomwd_ioctl(struct file *file,
+				unsigned int cmd, unsigned long arg)
 {
 	void __user *argp = (void __user *)arg;
 	int __user *p = argp;
@@ -204,32 +207,23 @@ static int mixcomwd_ioctl(struct inode *inode, struct file *file,
 		.identity = "MixCOM watchdog",
 	};
 
-	switch(cmd)
-	{
-		case WDIOC_GETSTATUS:
-			status=mixcomwd_opened;
-			if (!nowayout) {
-				status|=mixcomwd_timer_alive;
-			}
-			if (copy_to_user(p, &status, sizeof(int))) {
-				return -EFAULT;
-			}
-			break;
-		case WDIOC_GETBOOTSTATUS:
-			if (copy_to_user(p, &status, sizeof(int))) {
-				return -EFAULT;
-			}
-			break;
-		case WDIOC_GETSUPPORT:
-			if (copy_to_user(argp, &ident, sizeof(ident))) {
-				return -EFAULT;
-			}
-			break;
-		case WDIOC_KEEPALIVE:
-			mixcomwd_ping();
-			break;
-		default:
-			return -ENOTTY;
+	switch (cmd) {
+	case WDIOC_GETSUPPORT:
+		if (copy_to_user(argp, &ident, sizeof(ident)))
+			return -EFAULT;
+		break;
+	case WDIOC_GETSTATUS:
+		status = mixcomwd_opened;
+		if (!nowayout)
+			status |= mixcomwd_timer_alive;
+		return put_user(status, p);
+	case WDIOC_GETBOOTSTATUS:
+		return put_user(0, p);
+	case WDIOC_KEEPALIVE:
+		mixcomwd_ping();
+		break;
+	default:
+		return -ENOTTY;
 	}
 	return 0;
 }
@@ -238,7 +232,7 @@ static const struct file_operations mixcomwd_fops = {
 	.owner		= THIS_MODULE,
 	.llseek		= no_llseek,
 	.write		= mixcomwd_write,
-	.ioctl		= mixcomwd_ioctl,
+	.unlocked_ioctl	= mixcomwd_ioctl,
 	.open		= mixcomwd_open,
 	.release	= mixcomwd_release,
 };
@@ -253,15 +247,14 @@ static int __init checkcard(int port, int card_id)
 {
 	int id;
 
-	if (!request_region(port, 1, "MixCOM watchdog")) {
+	if (!request_region(port, 1, "MixCOM watchdog"))
 		return 0;
-	}
 
-	id=inb_p(port);
-	if (card_id==MIXCOM_ID)
+	id = inb_p(port);
+	if (card_id == MIXCOM_ID)
 		id &= 0x3f;
 
-	if (id!=card_id) {
+	if (id != card_id) {
 		release_region(port, 1);
 		return 0;
 	}
@@ -270,9 +263,7 @@ static int __init checkcard(int port, int card_id)
 
 static int __init mixcomwd_init(void)
 {
-	int i;
-	int ret;
-	int found=0;
+	int i, ret, found = 0;
 
 	for (i = 0; !found && mixcomwd_io_info[i].ioport != 0; i++) {
 		if (checkcard(mixcomwd_io_info[i].ioport,
@@ -283,20 +274,22 @@ static int __init mixcomwd_init(void)
 	}
 
 	if (!found) {
-		printk(KERN_ERR PFX "No card detected, or port not available.\n");
+		printk(KERN_ERR PFX
+			"No card detected, or port not available.\n");
 		return -ENODEV;
 	}
 
 	ret = misc_register(&mixcomwd_miscdev);
-	if (ret)
-	{
-		printk(KERN_ERR PFX "cannot register miscdev on minor=%d (err=%d)\n",
-			WATCHDOG_MINOR, ret);
+	if (ret) {
+		printk(KERN_ERR PFX
+			"cannot register miscdev on minor=%d (err=%d)\n",
+					WATCHDOG_MINOR, ret);
 		goto error_misc_register_watchdog;
 	}
 
-	printk(KERN_INFO "MixCOM watchdog driver v%s, watchdog port at 0x%3x\n",
-		VERSION, watchdog_port);
+	printk(KERN_INFO
+		"MixCOM watchdog driver v%s, watchdog port at 0x%3x\n",
+					VERSION, watchdog_port);
 
 	return 0;
 
@@ -309,15 +302,15 @@ error_misc_register_watchdog:
 static void __exit mixcomwd_exit(void)
 {
 	if (!nowayout) {
-		if(mixcomwd_timer_alive) {
+		if (mixcomwd_timer_alive) {
 			printk(KERN_WARNING PFX "I quit now, hardware will"
 			       " probably reboot!\n");
 			del_timer_sync(&mixcomwd_timer);
-			mixcomwd_timer_alive=0;
+			mixcomwd_timer_alive = 0;
 		}
 	}
 	misc_deregister(&mixcomwd_miscdev);
-	release_region(watchdog_port,1);
+	release_region(watchdog_port, 1);
 }
 
 module_init(mixcomwd_init);
diff --git a/drivers/watchdog/mpc5200_wdt.c b/drivers/watchdog/mpc5200_wdt.c
index 77c1c2ae2cc2..db91892558f2 100644
--- a/drivers/watchdog/mpc5200_wdt.c
+++ b/drivers/watchdog/mpc5200_wdt.c
@@ -5,7 +5,7 @@
 #include <linux/io.h>
 #include <linux/spinlock.h>
 #include <linux/of_platform.h>
-#include <asm/uaccess.h>
+#include <linux/uaccess.h>
 #include <asm/mpc52xx.h>
 
 
@@ -57,7 +57,8 @@ static int mpc5200_wdt_start(struct mpc5200_wdt *wdt)
 	/* set timeout, with maximum prescaler */
 	out_be32(&wdt->regs->count, 0x0 | wdt->count);
 	/* enable watchdog */
-	out_be32(&wdt->regs->mode, GPT_MODE_CE | GPT_MODE_WDT | GPT_MODE_MS_TIMER);
+	out_be32(&wdt->regs->mode, GPT_MODE_CE | GPT_MODE_WDT |
+						GPT_MODE_MS_TIMER);
 	spin_unlock(&wdt->io_lock);
 
 	return 0;
@@ -66,7 +67,8 @@ static int mpc5200_wdt_ping(struct mpc5200_wdt *wdt)
 {
 	spin_lock(&wdt->io_lock);
 	/* writing A5 to OCPW resets the watchdog */
-	out_be32(&wdt->regs->mode, 0xA5000000 | (0xffffff & in_be32(&wdt->regs->mode)));
+	out_be32(&wdt->regs->mode, 0xA5000000 |
+				(0xffffff & in_be32(&wdt->regs->mode)));
 	spin_unlock(&wdt->io_lock);
 	return 0;
 }
@@ -92,8 +94,8 @@ static struct watchdog_info mpc5200_wdt_info = {
 	.options	= WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING,
 	.identity	= "mpc5200 watchdog on GPT0",
 };
-static int mpc5200_wdt_ioctl(struct inode *inode, struct file *file,
-		unsigned int cmd, unsigned long arg)
+static long mpc5200_wdt_ioctl(struct file *file, unsigned int cmd,
+							unsigned long arg)
 {
 	struct mpc5200_wdt *wdt = file->private_data;
 	int __user *data = (int __user *)arg;
@@ -103,7 +105,7 @@ static int mpc5200_wdt_ioctl(struct inode *inode, struct file *file,
 	switch (cmd) {
 	case WDIOC_GETSUPPORT:
 		ret = copy_to_user(data, &mpc5200_wdt_info,
-			sizeof(mpc5200_wdt_info));
+						sizeof(mpc5200_wdt_info));
 		if (ret)
 			ret = -EFAULT;
 		break;
@@ -135,6 +137,7 @@ static int mpc5200_wdt_ioctl(struct inode *inode, struct file *file,
 	}
 	return ret;
 }
+
 static int mpc5200_wdt_open(struct inode *inode, struct file *file)
 {
 	/* /dev/watchdog can only be opened once */
@@ -161,13 +164,14 @@ static int mpc5200_wdt_release(struct inode *inode, struct file *file)
 static const struct file_operations mpc5200_wdt_fops = {
 	.owner	= THIS_MODULE,
 	.write	= mpc5200_wdt_write,
-	.ioctl	= mpc5200_wdt_ioctl,
+	.unlocked_ioctl	= mpc5200_wdt_ioctl,
 	.open	= mpc5200_wdt_open,
 	.release = mpc5200_wdt_release,
 };
 
 /* module operations */
-static int mpc5200_wdt_probe(struct of_device *op, const struct of_device_id *match)
+static int mpc5200_wdt_probe(struct of_device *op,
+					const struct of_device_id *match)
 {
 	struct mpc5200_wdt *wdt;
 	int err;
@@ -215,9 +219,9 @@ static int mpc5200_wdt_probe(struct of_device *op, const struct of_device_id *ma
 		return 0;
 
 	iounmap(wdt->regs);
- out_release:
+out_release:
 	release_mem_region(wdt->mem.start, size);
- out_free:
+out_free:
 	kfree(wdt);
 	return err;
 }
diff --git a/drivers/watchdog/mpc83xx_wdt.c b/drivers/watchdog/mpc83xx_wdt.c
deleted file mode 100644
index b16c5cd972eb..000000000000
--- a/drivers/watchdog/mpc83xx_wdt.c
+++ /dev/null
@@ -1,230 +0,0 @@
-/*
- * mpc83xx_wdt.c - MPC83xx watchdog userspace interface
- *
- * Authors: Dave Updegraff <dave@cray.org>
- * 	    Kumar Gala <galak@kernel.crashing.org>
- * 		Attribution: from 83xx_wst: Florian Schirmer <jolt@tuxbox.org>
- * 				..and from sc520_wdt
- *
- * Note: it appears that you can only actually ENABLE or DISABLE the thing
- * once after POR. Once enabled, you cannot disable, and vice versa.
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-
-#include <linux/fs.h>
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/miscdevice.h>
-#include <linux/platform_device.h>
-#include <linux/module.h>
-#include <linux/watchdog.h>
-#include <asm/io.h>
-#include <asm/uaccess.h>
-
-struct mpc83xx_wdt {
-	__be32 res0;
-	__be32 swcrr; /* System watchdog control register */
-#define SWCRR_SWTC 0xFFFF0000 /* Software Watchdog Time Count. */
-#define SWCRR_SWEN 0x00000004 /* Watchdog Enable bit. */
-#define SWCRR_SWRI 0x00000002 /* Software Watchdog Reset/Interrupt Select bit.*/
-#define SWCRR_SWPR 0x00000001 /* Software Watchdog Counter Prescale bit. */
-	__be32 swcnr; /* System watchdog count register */
-	u8 res1[2];
-	__be16 swsrr; /* System watchdog service register */
-	u8 res2[0xF0];
-};
-
-static struct mpc83xx_wdt __iomem *wd_base;
-
-static u16 timeout = 0xffff;
-module_param(timeout, ushort, 0);
-MODULE_PARM_DESC(timeout, "Watchdog timeout in ticks. (0<timeout<65536, default=65535");
-
-static int reset = 1;
-module_param(reset, bool, 0);
-MODULE_PARM_DESC(reset, "Watchdog Interrupt/Reset Mode. 0 = interrupt, 1 = reset");
-
-/*
- * We always prescale, but if someone really doesn't want to they can set this
- * to 0
- */
-static int prescale = 1;
-static unsigned int timeout_sec;
-
-static unsigned long wdt_is_open;
-static DEFINE_SPINLOCK(wdt_spinlock);
-
-static void mpc83xx_wdt_keepalive(void)
-{
-	/* Ping the WDT */
-	spin_lock(&wdt_spinlock);
-	out_be16(&wd_base->swsrr, 0x556c);
-	out_be16(&wd_base->swsrr, 0xaa39);
-	spin_unlock(&wdt_spinlock);
-}
-
-static ssize_t mpc83xx_wdt_write(struct file *file, const char __user *buf,
-				 size_t count, loff_t *ppos)
-{
-	if (count)
-		mpc83xx_wdt_keepalive();
-	return count;
-}
-
-static int mpc83xx_wdt_open(struct inode *inode, struct file *file)
-{
-	u32 tmp = SWCRR_SWEN;
-	if (test_and_set_bit(0, &wdt_is_open))
-		return -EBUSY;
-
-	/* Once we start the watchdog we can't stop it */
-	__module_get(THIS_MODULE);
-
-	/* Good, fire up the show */
-	if (prescale)
-		tmp |= SWCRR_SWPR;
-	if (reset)
-		tmp |= SWCRR_SWRI;
-
-	tmp |= timeout << 16;
-
-	out_be32(&wd_base->swcrr, tmp);
-
-	return nonseekable_open(inode, file);
-}
-
-static int mpc83xx_wdt_release(struct inode *inode, struct file *file)
-{
-	printk(KERN_CRIT "Unexpected close, not stopping watchdog!\n");
-	mpc83xx_wdt_keepalive();
-	clear_bit(0, &wdt_is_open);
-	return 0;
-}
-
-static int mpc83xx_wdt_ioctl(struct inode *inode, struct file *file,
-				unsigned int cmd, unsigned long arg)
-{
-	void __user *argp = (void __user *)arg;
-	int __user *p = argp;
-	static struct watchdog_info ident = {
-		.options = WDIOF_KEEPALIVEPING,
-		.firmware_version = 1,
-		.identity = "MPC83xx",
-	};
-
-	switch (cmd) {
-	case WDIOC_GETSUPPORT:
-		return copy_to_user(argp, &ident, sizeof(ident)) ? -EFAULT : 0;
-	case WDIOC_GETSTATUS:
-	case WDIOC_GETBOOTSTATUS:
-		return put_user(0, p);
-	case WDIOC_KEEPALIVE:
-		mpc83xx_wdt_keepalive();
-		return 0;
-	case WDIOC_GETTIMEOUT:
-		return put_user(timeout_sec, p);
-	default:
-		return -ENOTTY;
-	}
-}
-
-static const struct file_operations mpc83xx_wdt_fops = {
-	.owner		= THIS_MODULE,
-	.llseek		= no_llseek,
-	.write		= mpc83xx_wdt_write,
-	.ioctl		= mpc83xx_wdt_ioctl,
-	.open		= mpc83xx_wdt_open,
-	.release	= mpc83xx_wdt_release,
-};
-
-static struct miscdevice mpc83xx_wdt_miscdev = {
-	.minor	= WATCHDOG_MINOR,
-	.name	= "watchdog",
-	.fops	= &mpc83xx_wdt_fops,
-};
-
-static int __devinit mpc83xx_wdt_probe(struct platform_device *dev)
-{
-	struct resource *r;
-	int ret;
-	unsigned int *freq = dev->dev.platform_data;
-
-	/* get a pointer to the register memory */
-	r = platform_get_resource(dev, IORESOURCE_MEM, 0);
-
-	if (!r) {
-		ret = -ENODEV;
-		goto err_out;
-	}
-
-	wd_base = ioremap(r->start, sizeof (struct mpc83xx_wdt));
-
-	if (wd_base == NULL) {
-		ret = -ENOMEM;
-		goto err_out;
-	}
-
-	ret = misc_register(&mpc83xx_wdt_miscdev);
-	if (ret) {
-		printk(KERN_ERR "cannot register miscdev on minor=%d "
-				"(err=%d)\n",
-				WATCHDOG_MINOR, ret);
-		goto err_unmap;
-	}
-
-	/* Calculate the timeout in seconds */
-	if (prescale)
-		timeout_sec = (timeout * 0x10000) / (*freq);
-	else
-		timeout_sec = timeout / (*freq);
-
-	printk(KERN_INFO "WDT driver for MPC83xx initialized. "
-		"mode:%s timeout=%d (%d seconds)\n",
-		reset ? "reset":"interrupt", timeout, timeout_sec);
-	return 0;
-
-err_unmap:
-	iounmap(wd_base);
-err_out:
-	return ret;
-}
-
-static int __devexit mpc83xx_wdt_remove(struct platform_device *dev)
-{
-	misc_deregister(&mpc83xx_wdt_miscdev);
-	iounmap(wd_base);
-
-	return 0;
-}
-
-static struct platform_driver mpc83xx_wdt_driver = {
-	.probe		= mpc83xx_wdt_probe,
-	.remove		= __devexit_p(mpc83xx_wdt_remove),
-	.driver		= {
-		.name	= "mpc83xx_wdt",
-		.owner	= THIS_MODULE,
-	},
-};
-
-static int __init mpc83xx_wdt_init(void)
-{
-	return platform_driver_register(&mpc83xx_wdt_driver);
-}
-
-static void __exit mpc83xx_wdt_exit(void)
-{
-	platform_driver_unregister(&mpc83xx_wdt_driver);
-}
-
-module_init(mpc83xx_wdt_init);
-module_exit(mpc83xx_wdt_exit);
-
-MODULE_AUTHOR("Dave Updegraff, Kumar Gala");
-MODULE_DESCRIPTION("Driver for watchdog timer in MPC83xx uProcessor");
-MODULE_LICENSE("GPL");
-MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR);
-MODULE_ALIAS("platform:mpc83xx_wdt");
diff --git a/drivers/watchdog/mpc8xx_wdt.c b/drivers/watchdog/mpc8xx_wdt.c
deleted file mode 100644
index 85b5734403a5..000000000000
--- a/drivers/watchdog/mpc8xx_wdt.c
+++ /dev/null
@@ -1,169 +0,0 @@
-/*
- * mpc8xx_wdt.c - MPC8xx watchdog userspace interface
- *
- * Author: Florian Schirmer <jolt@tuxbox.org>
- *
- * 2002 (c) Florian Schirmer <jolt@tuxbox.org> This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-
-#include <linux/fs.h>
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/miscdevice.h>
-#include <linux/module.h>
-#include <linux/watchdog.h>
-#include <asm/8xx_immap.h>
-#include <asm/uaccess.h>
-#include <asm/io.h>
-#include <syslib/m8xx_wdt.h>
-
-static unsigned long wdt_opened;
-static int wdt_status;
-
-static void mpc8xx_wdt_handler_disable(void)
-{
-	volatile uint __iomem *piscr;
-	piscr = (uint *)&((immap_t*)IMAP_ADDR)->im_sit.sit_piscr;
-
-	if (!m8xx_has_internal_rtc)
-		m8xx_wdt_stop_timer();
-	else
-		out_be32(piscr, in_be32(piscr) & ~(PISCR_PIE | PISCR_PTE));
-
-	printk(KERN_NOTICE "mpc8xx_wdt: keep-alive handler deactivated\n");
-}
-
-static void mpc8xx_wdt_handler_enable(void)
-{
-	volatile uint __iomem *piscr;
-	piscr = (uint *)&((immap_t*)IMAP_ADDR)->im_sit.sit_piscr;
-
-	if (!m8xx_has_internal_rtc)
-		m8xx_wdt_install_timer();
-	else
-		out_be32(piscr, in_be32(piscr) | PISCR_PIE | PISCR_PTE);
-
-	printk(KERN_NOTICE "mpc8xx_wdt: keep-alive handler activated\n");
-}
-
-static int mpc8xx_wdt_open(struct inode *inode, struct file *file)
-{
-	if (test_and_set_bit(0, &wdt_opened))
-		return -EBUSY;
-
-	m8xx_wdt_reset();
-	mpc8xx_wdt_handler_disable();
-
-	return nonseekable_open(inode, file);
-}
-
-static int mpc8xx_wdt_release(struct inode *inode, struct file *file)
-{
-	m8xx_wdt_reset();
-
-#if !defined(CONFIG_WATCHDOG_NOWAYOUT)
-	mpc8xx_wdt_handler_enable();
-#endif
-
-	clear_bit(0, &wdt_opened);
-
-	return 0;
-}
-
-static ssize_t mpc8xx_wdt_write(struct file *file, const char *data, size_t len,
-				loff_t * ppos)
-{
-	if (len)
-		m8xx_wdt_reset();
-
-	return len;
-}
-
-static int mpc8xx_wdt_ioctl(struct inode *inode, struct file *file,
-			    unsigned int cmd, unsigned long arg)
-{
-	int timeout;
-	static struct watchdog_info info = {
-		.options = WDIOF_KEEPALIVEPING,
-		.firmware_version = 0,
-		.identity = "MPC8xx watchdog",
-	};
-
-	switch (cmd) {
-	case WDIOC_GETSUPPORT:
-		if (copy_to_user((void *)arg, &info, sizeof(info)))
-			return -EFAULT;
-		break;
-
-	case WDIOC_GETSTATUS:
-	case WDIOC_GETBOOTSTATUS:
-		if (put_user(wdt_status, (int *)arg))
-			return -EFAULT;
-		wdt_status &= ~WDIOF_KEEPALIVEPING;
-		break;
-
-	case WDIOC_GETTEMP:
-		return -EOPNOTSUPP;
-
-	case WDIOC_SETOPTIONS:
-		return -EOPNOTSUPP;
-
-	case WDIOC_KEEPALIVE:
-		m8xx_wdt_reset();
-		wdt_status |= WDIOF_KEEPALIVEPING;
-		break;
-
-	case WDIOC_SETTIMEOUT:
-		return -EOPNOTSUPP;
-
-	case WDIOC_GETTIMEOUT:
-		timeout = m8xx_wdt_get_timeout();
-		if (put_user(timeout, (int *)arg))
-			return -EFAULT;
-		break;
-
-	default:
-		return -ENOTTY;
-	}
-
-	return 0;
-}
-
-static const struct file_operations mpc8xx_wdt_fops = {
-	.owner = THIS_MODULE,
-	.llseek = no_llseek,
-	.write = mpc8xx_wdt_write,
-	.ioctl = mpc8xx_wdt_ioctl,
-	.open = mpc8xx_wdt_open,
-	.release = mpc8xx_wdt_release,
-};
-
-static struct miscdevice mpc8xx_wdt_miscdev = {
-	.minor = WATCHDOG_MINOR,
-	.name = "watchdog",
-	.fops = &mpc8xx_wdt_fops,
-};
-
-static int __init mpc8xx_wdt_init(void)
-{
-	return misc_register(&mpc8xx_wdt_miscdev);
-}
-
-static void __exit mpc8xx_wdt_exit(void)
-{
-	misc_deregister(&mpc8xx_wdt_miscdev);
-
-	m8xx_wdt_reset();
-	mpc8xx_wdt_handler_enable();
-}
-
-module_init(mpc8xx_wdt_init);
-module_exit(mpc8xx_wdt_exit);
-
-MODULE_AUTHOR("Florian Schirmer <jolt@tuxbox.org>");
-MODULE_DESCRIPTION("MPC8xx watchdog driver");
-MODULE_LICENSE("GPL");
-MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR);
diff --git a/drivers/watchdog/mpc8xxx_wdt.c b/drivers/watchdog/mpc8xxx_wdt.c
new file mode 100644
index 000000000000..38c588ee694f
--- /dev/null
+++ b/drivers/watchdog/mpc8xxx_wdt.c
@@ -0,0 +1,325 @@
+/*
+ * mpc8xxx_wdt.c - MPC8xx/MPC83xx/MPC86xx watchdog userspace interface
+ *
+ * Authors: Dave Updegraff <dave@cray.org>
+ * 	    Kumar Gala <galak@kernel.crashing.org>
+ * 		Attribution: from 83xx_wst: Florian Schirmer <jolt@tuxbox.org>
+ * 				..and from sc520_wdt
+ * Copyright (c) 2008  MontaVista Software, Inc.
+ *                     Anton Vorontsov <avorontsov@ru.mvista.com>
+ *
+ * Note: it appears that you can only actually ENABLE or DISABLE the thing
+ * once after POR. Once enabled, you cannot disable, and vice versa.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/fs.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/timer.h>
+#include <linux/miscdevice.h>
+#include <linux/of_platform.h>
+#include <linux/module.h>
+#include <linux/watchdog.h>
+#include <linux/io.h>
+#include <linux/uaccess.h>
+#include <sysdev/fsl_soc.h>
+
+struct mpc8xxx_wdt {
+	__be32 res0;
+	__be32 swcrr; /* System watchdog control register */
+#define SWCRR_SWTC 0xFFFF0000 /* Software Watchdog Time Count. */
+#define SWCRR_SWEN 0x00000004 /* Watchdog Enable bit. */
+#define SWCRR_SWRI 0x00000002 /* Software Watchdog Reset/Interrupt Select bit.*/
+#define SWCRR_SWPR 0x00000001 /* Software Watchdog Counter Prescale bit. */
+	__be32 swcnr; /* System watchdog count register */
+	u8 res1[2];
+	__be16 swsrr; /* System watchdog service register */
+	u8 res2[0xF0];
+};
+
+struct mpc8xxx_wdt_type {
+	int prescaler;
+	bool hw_enabled;
+};
+
+static struct mpc8xxx_wdt __iomem *wd_base;
+static int mpc8xxx_wdt_init_late(void);
+
+static u16 timeout = 0xffff;
+module_param(timeout, ushort, 0);
+MODULE_PARM_DESC(timeout,
+	"Watchdog timeout in ticks. (0<timeout<65536, default=65535");
+
+static int reset = 1;
+module_param(reset, bool, 0);
+MODULE_PARM_DESC(reset,
+	"Watchdog Interrupt/Reset Mode. 0 = interrupt, 1 = reset");
+
+static int nowayout = WATCHDOG_NOWAYOUT;
+module_param(nowayout, int, 0);
+MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started "
+		 "(default=" __MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
+
+/*
+ * We always prescale, but if someone really doesn't want to they can set this
+ * to 0
+ */
+static int prescale = 1;
+static unsigned int timeout_sec;
+
+static unsigned long wdt_is_open;
+static DEFINE_SPINLOCK(wdt_spinlock);
+
+static void mpc8xxx_wdt_keepalive(void)
+{
+	/* Ping the WDT */
+	spin_lock(&wdt_spinlock);
+	out_be16(&wd_base->swsrr, 0x556c);
+	out_be16(&wd_base->swsrr, 0xaa39);
+	spin_unlock(&wdt_spinlock);
+}
+
+static void mpc8xxx_wdt_timer_ping(unsigned long arg);
+static DEFINE_TIMER(wdt_timer, mpc8xxx_wdt_timer_ping, 0, 0);
+
+static void mpc8xxx_wdt_timer_ping(unsigned long arg)
+{
+	mpc8xxx_wdt_keepalive();
+	/* We're pinging it twice faster than needed, just to be sure. */
+	mod_timer(&wdt_timer, jiffies + HZ * timeout_sec / 2);
+}
+
+static void mpc8xxx_wdt_pr_warn(const char *msg)
+{
+	pr_crit("mpc8xxx_wdt: %s, expect the %s soon!\n", msg,
+		reset ? "reset" : "machine check exception");
+}
+
+static ssize_t mpc8xxx_wdt_write(struct file *file, const char __user *buf,
+				 size_t count, loff_t *ppos)
+{
+	if (count)
+		mpc8xxx_wdt_keepalive();
+	return count;
+}
+
+static int mpc8xxx_wdt_open(struct inode *inode, struct file *file)
+{
+	u32 tmp = SWCRR_SWEN;
+	if (test_and_set_bit(0, &wdt_is_open))
+		return -EBUSY;
+
+	/* Once we start the watchdog we can't stop it */
+	if (nowayout)
+		__module_get(THIS_MODULE);
+
+	/* Good, fire up the show */
+	if (prescale)
+		tmp |= SWCRR_SWPR;
+	if (reset)
+		tmp |= SWCRR_SWRI;
+
+	tmp |= timeout << 16;
+
+	out_be32(&wd_base->swcrr, tmp);
+
+	del_timer_sync(&wdt_timer);
+
+	return nonseekable_open(inode, file);
+}
+
+static int mpc8xxx_wdt_release(struct inode *inode, struct file *file)
+{
+	if (!nowayout)
+		mpc8xxx_wdt_timer_ping(0);
+	else
+		mpc8xxx_wdt_pr_warn("watchdog closed");
+	clear_bit(0, &wdt_is_open);
+	return 0;
+}
+
+static long mpc8xxx_wdt_ioctl(struct file *file, unsigned int cmd,
+							unsigned long arg)
+{
+	void __user *argp = (void __user *)arg;
+	int __user *p = argp;
+	static struct watchdog_info ident = {
+		.options = WDIOF_KEEPALIVEPING,
+		.firmware_version = 1,
+		.identity = "MPC8xxx",
+	};
+
+	switch (cmd) {
+	case WDIOC_GETSUPPORT:
+		return copy_to_user(argp, &ident, sizeof(ident)) ? -EFAULT : 0;
+	case WDIOC_GETSTATUS:
+	case WDIOC_GETBOOTSTATUS:
+		return put_user(0, p);
+	case WDIOC_KEEPALIVE:
+		mpc8xxx_wdt_keepalive();
+		return 0;
+	case WDIOC_GETTIMEOUT:
+		return put_user(timeout_sec, p);
+	default:
+		return -ENOTTY;
+	}
+}
+
+static const struct file_operations mpc8xxx_wdt_fops = {
+	.owner		= THIS_MODULE,
+	.llseek		= no_llseek,
+	.write		= mpc8xxx_wdt_write,
+	.unlocked_ioctl	= mpc8xxx_wdt_ioctl,
+	.open		= mpc8xxx_wdt_open,
+	.release	= mpc8xxx_wdt_release,
+};
+
+static struct miscdevice mpc8xxx_wdt_miscdev = {
+	.minor	= WATCHDOG_MINOR,
+	.name	= "watchdog",
+	.fops	= &mpc8xxx_wdt_fops,
+};
+
+static int __devinit mpc8xxx_wdt_probe(struct of_device *ofdev,
+				       const struct of_device_id *match)
+{
+	int ret;
+	struct device_node *np = ofdev->node;
+	struct mpc8xxx_wdt_type *wdt_type = match->data;
+	u32 freq = fsl_get_sys_freq();
+	bool enabled;
+
+	if (!freq || freq == -1)
+		return -EINVAL;
+
+	wd_base = of_iomap(np, 0);
+	if (!wd_base)
+		return -ENOMEM;
+
+	enabled = in_be32(&wd_base->swcrr) & SWCRR_SWEN;
+	if (!enabled && wdt_type->hw_enabled) {
+		pr_info("mpc8xxx_wdt: could not be enabled in software\n");
+		ret = -ENOSYS;
+		goto err_unmap;
+	}
+
+	/* Calculate the timeout in seconds */
+	if (prescale)
+		timeout_sec = (timeout * wdt_type->prescaler) / freq;
+	else
+		timeout_sec = timeout / freq;
+
+#ifdef MODULE
+	ret = mpc8xxx_wdt_init_late();
+	if (ret)
+		goto err_unmap;
+#endif
+
+	pr_info("WDT driver for MPC8xxx initialized. mode:%s timeout=%d "
+		"(%d seconds)\n", reset ? "reset" : "interrupt", timeout,
+		timeout_sec);
+
+	/*
+	 * If the watchdog was previously enabled or we're running on
+	 * MPC8xxx, we should ping the wdt from the kernel until the
+	 * userspace handles it.
+	 */
+	if (enabled)
+		mpc8xxx_wdt_timer_ping(0);
+	return 0;
+err_unmap:
+	iounmap(wd_base);
+	wd_base = NULL;
+	return ret;
+}
+
+static int __devexit mpc8xxx_wdt_remove(struct of_device *ofdev)
+{
+	mpc8xxx_wdt_pr_warn("watchdog removed");
+	del_timer_sync(&wdt_timer);
+	misc_deregister(&mpc8xxx_wdt_miscdev);
+	iounmap(wd_base);
+
+	return 0;
+}
+
+static const struct of_device_id mpc8xxx_wdt_match[] = {
+	{
+		.compatible = "mpc83xx_wdt",
+		.data = &(struct mpc8xxx_wdt_type) {
+			.prescaler = 0x10000,
+		},
+	},
+	{
+		.compatible = "fsl,mpc8610-wdt",
+		.data = &(struct mpc8xxx_wdt_type) {
+			.prescaler = 0x10000,
+			.hw_enabled = true,
+		},
+	},
+	{
+		.compatible = "fsl,mpc823-wdt",
+		.data = &(struct mpc8xxx_wdt_type) {
+			.prescaler = 0x800,
+		},
+	},
+	{},
+};
+MODULE_DEVICE_TABLE(of, mpc8xxx_wdt_match);
+
+static struct of_platform_driver mpc8xxx_wdt_driver = {
+	.match_table	= mpc8xxx_wdt_match,
+	.probe		= mpc8xxx_wdt_probe,
+	.remove		= __devexit_p(mpc8xxx_wdt_remove),
+	.driver		= {
+		.name	= "mpc8xxx_wdt",
+		.owner	= THIS_MODULE,
+	},
+};
+
+/*
+ * We do wdt initialization in two steps: arch_initcall probes the wdt
+ * very early to start pinging the watchdog (misc devices are not yet
+ * available), and later module_init() just registers the misc device.
+ */
+static int mpc8xxx_wdt_init_late(void)
+{
+	int ret;
+
+	if (!wd_base)
+		return -ENODEV;
+
+	ret = misc_register(&mpc8xxx_wdt_miscdev);
+	if (ret) {
+		pr_err("cannot register miscdev on minor=%d (err=%d)\n",
+			WATCHDOG_MINOR, ret);
+		return ret;
+	}
+	return 0;
+}
+#ifndef MODULE
+module_init(mpc8xxx_wdt_init_late);
+#endif
+
+static int __init mpc8xxx_wdt_init(void)
+{
+	return of_register_platform_driver(&mpc8xxx_wdt_driver);
+}
+arch_initcall(mpc8xxx_wdt_init);
+
+static void __exit mpc8xxx_wdt_exit(void)
+{
+	of_unregister_platform_driver(&mpc8xxx_wdt_driver);
+}
+module_exit(mpc8xxx_wdt_exit);
+
+MODULE_AUTHOR("Dave Updegraff, Kumar Gala");
+MODULE_DESCRIPTION("Driver for watchdog timer in MPC8xx/MPC83xx/MPC86xx "
+		   "uProcessors");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR);
diff --git a/drivers/watchdog/mpcore_wdt.c b/drivers/watchdog/mpcore_wdt.c
index 009573b81496..2a9bfa81f9d6 100644
--- a/drivers/watchdog/mpcore_wdt.c
+++ b/drivers/watchdog/mpcore_wdt.c
@@ -29,9 +29,9 @@
 #include <linux/init.h>
 #include <linux/interrupt.h>
 #include <linux/platform_device.h>
+#include <linux/uaccess.h>
 
 #include <asm/hardware/arm_twd.h>
-#include <asm/uaccess.h>
 
 struct mpcore_wdt {
 	unsigned long	timer_alive;
@@ -43,17 +43,20 @@ struct mpcore_wdt {
 };
 
 static struct platform_device *mpcore_wdt_dev;
-
 extern unsigned int mpcore_timer_rate;
 
 #define TIMER_MARGIN	60
 static int mpcore_margin = TIMER_MARGIN;
 module_param(mpcore_margin, int, 0);
-MODULE_PARM_DESC(mpcore_margin, "MPcore timer margin in seconds. (0<mpcore_margin<65536, default=" __MODULE_STRING(TIMER_MARGIN) ")");
+MODULE_PARM_DESC(mpcore_margin,
+	"MPcore timer margin in seconds. (0 < mpcore_margin < 65536, default="
+				__MODULE_STRING(TIMER_MARGIN) ")");
 
 static int nowayout = WATCHDOG_NOWAYOUT;
 module_param(nowayout, int, 0);
-MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=" __MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
+MODULE_PARM_DESC(nowayout,
+	"Watchdog cannot be stopped once started (default="
+				__MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
 
 #define ONLY_TESTING	0
 static int mpcore_noboot = ONLY_TESTING;
@@ -70,14 +73,12 @@ static irqreturn_t mpcore_wdt_fire(int irq, void *arg)
 
 	/* Check it really was our interrupt */
 	if (readl(wdt->base + TWD_WDOG_INTSTAT)) {
-		dev_printk(KERN_CRIT, wdt->dev, "Triggered - Reboot ignored.\n");
-
+		dev_printk(KERN_CRIT, wdt->dev,
+					"Triggered - Reboot ignored.\n");
 		/* Clear the interrupt on the watchdog */
 		writel(1, wdt->base + TWD_WDOG_INTSTAT);
-
 		return IRQ_HANDLED;
 	}
-
 	return IRQ_NONE;
 }
 
@@ -96,22 +97,26 @@ static void mpcore_wdt_keepalive(struct mpcore_wdt *wdt)
 	count = (mpcore_timer_rate / 256) * mpcore_margin;
 
 	/* Reload the counter */
+	spin_lock(&wdt_lock);
 	writel(count + wdt->perturb, wdt->base + TWD_WDOG_LOAD);
-
 	wdt->perturb = wdt->perturb ? 0 : 1;
+	spin_unlock(&wdt_lock);
 }
 
 static void mpcore_wdt_stop(struct mpcore_wdt *wdt)
 {
+	spin_lock(&wdt_lock);
 	writel(0x12345678, wdt->base + TWD_WDOG_DISABLE);
 	writel(0x87654321, wdt->base + TWD_WDOG_DISABLE);
 	writel(0x0, wdt->base + TWD_WDOG_CONTROL);
+	spin_unlock(&wdt_lock);
 }
 
 static void mpcore_wdt_start(struct mpcore_wdt *wdt)
 {
 	dev_printk(KERN_INFO, wdt->dev, "enabling watchdog.\n");
 
+	spin_lock(&wdt_lock);
 	/* This loads the count register but does NOT start the count yet */
 	mpcore_wdt_keepalive(wdt);
 
@@ -122,6 +127,7 @@ static void mpcore_wdt_start(struct mpcore_wdt *wdt)
 		/* Enable watchdog - prescale=256, watchdog mode=1, enable=1 */
 		writel(0x0000FF09, wdt->base + TWD_WDOG_CONTROL);
 	}
+	spin_unlock(&wdt_lock);
 }
 
 static int mpcore_wdt_set_heartbeat(int t)
@@ -164,10 +170,11 @@ static int mpcore_wdt_release(struct inode *inode, struct file *file)
 	 *	Shut off the timer.
 	 * 	Lock it in if it's a module and we set nowayout
 	 */
-	if (wdt->expect_close == 42) {
+	if (wdt->expect_close == 42)
 		mpcore_wdt_stop(wdt);
-	} else {
-		dev_printk(KERN_CRIT, wdt->dev, "unexpected close, not stopping watchdog!\n");
+	else {
+		dev_printk(KERN_CRIT, wdt->dev,
+				"unexpected close, not stopping watchdog!\n");
 		mpcore_wdt_keepalive(wdt);
 	}
 	clear_bit(0, &wdt->timer_alive);
@@ -175,7 +182,8 @@ static int mpcore_wdt_release(struct inode *inode, struct file *file)
 	return 0;
 }
 
-static ssize_t mpcore_wdt_write(struct file *file, const char *data, size_t len, loff_t *ppos)
+static ssize_t mpcore_wdt_write(struct file *file, const char *data,
+						size_t len, loff_t *ppos)
 {
 	struct mpcore_wdt *wdt = file->private_data;
 
@@ -210,8 +218,8 @@ static struct watchdog_info ident = {
 	.identity		= "MPcore Watchdog",
 };
 
-static int mpcore_wdt_ioctl(struct inode *inode, struct file *file,
-			     unsigned int cmd, unsigned long arg)
+static long mpcore_wdt_ioctl(struct file *file, unsigned int cmd,
+							unsigned long arg)
 {
 	struct mpcore_wdt *wdt = file->private_data;
 	int ret;
@@ -235,6 +243,12 @@ static int mpcore_wdt_ioctl(struct inode *inode, struct file *file,
 		ret = 0;
 		break;
 
+	case WDIOC_GETSTATUS:
+	case WDIOC_GETBOOTSTATUS:
+		uarg.i = 0;
+		ret = 0;
+		break;
+
 	case WDIOC_SETOPTIONS:
 		ret = -EINVAL;
 		if (uarg.i & WDIOS_DISABLECARD) {
@@ -247,12 +261,6 @@ static int mpcore_wdt_ioctl(struct inode *inode, struct file *file,
 		}
 		break;
 
-	case WDIOC_GETSTATUS:
-	case WDIOC_GETBOOTSTATUS:
-		uarg.i = 0;
-		ret = 0;
-		break;
-
 	case WDIOC_KEEPALIVE:
 		mpcore_wdt_keepalive(wdt);
 		ret = 0;
@@ -301,7 +309,7 @@ static const struct file_operations mpcore_wdt_fops = {
 	.owner		= THIS_MODULE,
 	.llseek		= no_llseek,
 	.write		= mpcore_wdt_write,
-	.ioctl		= mpcore_wdt_ioctl,
+	.unlocked_ioctl	= mpcore_wdt_ioctl,
 	.open		= mpcore_wdt_open,
 	.release	= mpcore_wdt_release,
 };
@@ -349,14 +357,17 @@ static int __devinit mpcore_wdt_probe(struct platform_device *dev)
 	mpcore_wdt_miscdev.parent = &dev->dev;
 	ret = misc_register(&mpcore_wdt_miscdev);
 	if (ret) {
-		dev_printk(KERN_ERR, _dev, "cannot register miscdev on minor=%d (err=%d)\n",
-			   WATCHDOG_MINOR, ret);
+		dev_printk(KERN_ERR, _dev,
+			"cannot register miscdev on minor=%d (err=%d)\n",
+							WATCHDOG_MINOR, ret);
 		goto err_misc;
 	}
 
-	ret = request_irq(wdt->irq, mpcore_wdt_fire, IRQF_DISABLED, "mpcore_wdt", wdt);
+	ret = request_irq(wdt->irq, mpcore_wdt_fire, IRQF_DISABLED,
+							"mpcore_wdt", wdt);
 	if (ret) {
-		dev_printk(KERN_ERR, _dev, "cannot register IRQ%d for watchdog\n", wdt->irq);
+		dev_printk(KERN_ERR, _dev,
+			"cannot register IRQ%d for watchdog\n", wdt->irq);
 		goto err_irq;
 	}
 
@@ -366,13 +377,13 @@ static int __devinit mpcore_wdt_probe(struct platform_device *dev)
 
 	return 0;
 
- err_irq:
+err_irq:
 	misc_deregister(&mpcore_wdt_miscdev);
- err_misc:
+err_misc:
 	iounmap(wdt->base);
- err_free:
+err_free:
 	kfree(wdt);
- err_out:
+err_out:
 	return ret;
 }
 
@@ -415,7 +426,7 @@ static int __init mpcore_wdt_init(void)
 	 */
 	if (mpcore_wdt_set_heartbeat(mpcore_margin)) {
 		mpcore_wdt_set_heartbeat(TIMER_MARGIN);
-		printk(KERN_INFO "mpcore_margin value must be 0<mpcore_margin<65536, using %d\n",
+		printk(KERN_INFO "mpcore_margin value must be 0 < mpcore_margin < 65536, using %d\n",
 			TIMER_MARGIN);
 	}
 
diff --git a/drivers/watchdog/mtx-1_wdt.c b/drivers/watchdog/mtx-1_wdt.c
index a8e67383784e..b4b7b0a4c119 100644
--- a/drivers/watchdog/mtx-1_wdt.c
+++ b/drivers/watchdog/mtx-1_wdt.c
@@ -1,7 +1,8 @@
 /*
  *      Driver for the MTX-1 Watchdog.
  *
- *      (C) Copyright 2005 4G Systems <info@4g-systems.biz>, All Rights Reserved.
+ *      (C) Copyright 2005 4G Systems <info@4g-systems.biz>,
+ *							All Rights Reserved.
  *                              http://www.4g-systems.biz
  *
  * 	(C) Copyright 2007 OpenWrt.org, Florian Fainelli <florian@openwrt.org>
@@ -46,12 +47,11 @@
 #include <linux/jiffies.h>
 #include <linux/watchdog.h>
 #include <linux/platform_device.h>
-
-#include <asm/io.h>
-#include <asm/uaccess.h>
+#include <linux/io.h>
+#include <linux/uaccess.h>
+#include <linux/gpio.h>
 
 #include <asm/mach-au1x00/au1000.h>
-#include <asm/gpio.h>
 
 #define MTX1_WDT_INTERVAL	(5 * HZ)
 
@@ -59,6 +59,7 @@ static int ticks = 100 * HZ;
 
 static struct {
 	struct completion stop;
+	spinlock_t lock;
 	int running;
 	struct timer_list timer;
 	int queue;
@@ -71,6 +72,7 @@ static void mtx1_wdt_trigger(unsigned long unused)
 {
 	u32 tmp;
 
+	spin_lock(&mtx1_wdt_device.lock);
 	if (mtx1_wdt_device.running)
 		ticks--;
 	/*
@@ -79,13 +81,13 @@ static void mtx1_wdt_trigger(unsigned long unused)
 	tmp = au_readl(GPIO2_DIR);
 	tmp = (tmp & ~(1 << mtx1_wdt_device.gpio)) |
 	      ((~tmp) & (1 << mtx1_wdt_device.gpio));
-	au_writel (tmp, GPIO2_DIR);
+	au_writel(tmp, GPIO2_DIR);
 
 	if (mtx1_wdt_device.queue && ticks)
 		mod_timer(&mtx1_wdt_device.timer, jiffies + MTX1_WDT_INTERVAL);
-	else {
+	else
 		complete(&mtx1_wdt_device.stop);
-	}
+	spin_unlock(&mtx1_wdt_device.lock);
 }
 
 static void mtx1_wdt_reset(void)
@@ -96,23 +98,25 @@ static void mtx1_wdt_reset(void)
 
 static void mtx1_wdt_start(void)
 {
+	spin_lock_irqsave(&mtx1_wdt_device.lock, flags);
 	if (!mtx1_wdt_device.queue) {
 		mtx1_wdt_device.queue = 1;
 		gpio_set_value(mtx1_wdt_device.gpio, 1);
 		mod_timer(&mtx1_wdt_device.timer, jiffies + MTX1_WDT_INTERVAL);
 	}
 	mtx1_wdt_device.running++;
+	spin_unlock_irqrestore(&mtx1_wdt_device.lock, flags);
 }
 
 static int mtx1_wdt_stop(void)
 {
+	spin_lock_irqsave(&mtx1_wdt_device.lock, flags);
 	if (mtx1_wdt_device.queue) {
 		mtx1_wdt_device.queue = 0;
 		gpio_set_value(mtx1_wdt_device.gpio, 0);
 	}
-
 	ticks = mtx1_wdt_device.default_ticks;
-
+	spin_unlock_irqrestore(&mtx1_wdt_device.lock, flags);
 	return 0;
 }
 
@@ -122,7 +126,6 @@ static int mtx1_wdt_open(struct inode *inode, struct file *file)
 {
 	if (test_and_set_bit(0, &mtx1_wdt_device.inuse))
 		return -EBUSY;
-
 	return nonseekable_open(inode, file);
 }
 
@@ -133,54 +136,51 @@ static int mtx1_wdt_release(struct inode *inode, struct file *file)
 	return 0;
 }
 
-static int mtx1_wdt_ioctl(struct inode *inode, struct file *file, unsigned int cmd, unsigned long arg)
+static long mtx1_wdt_ioctl(struct file *file, unsigned int cmd,
+							unsigned long arg)
 {
 	void __user *argp = (void __user *)arg;
+	int __user *p = (int __user *)argp;
 	unsigned int value;
-	static struct watchdog_info ident =
-	{
+	static const struct watchdog_info ident = {
 		.options = WDIOF_CARDRESET,
 		.identity = "MTX-1 WDT",
 	};
 
-	switch(cmd) {
-		case WDIOC_KEEPALIVE:
-			mtx1_wdt_reset();
-			break;
-		case WDIOC_GETSTATUS:
-		case WDIOC_GETBOOTSTATUS:
-			if ( copy_to_user(argp, &value, sizeof(int)) )
-				return -EFAULT;
-			break;
-		case WDIOC_GETSUPPORT:
-			if ( copy_to_user(argp, &ident, sizeof(ident)) )
-				return -EFAULT;
-			break;
-		case WDIOC_SETOPTIONS:
-			if ( copy_from_user(&value, argp, sizeof(int)) )
-				return -EFAULT;
-			switch(value) {
-				case WDIOS_ENABLECARD:
-					mtx1_wdt_start();
-					break;
-				case WDIOS_DISABLECARD:
-					return mtx1_wdt_stop();
-				default:
-					return -EINVAL;
-			}
-			break;
-		default:
-			return -ENOTTY;
+	switch (cmd) {
+	case WDIOC_GETSUPPORT:
+		if (copy_to_user(argp, &ident, sizeof(ident)))
+			return -EFAULT;
+		break;
+	case WDIOC_GETSTATUS:
+	case WDIOC_GETBOOTSTATUS:
+		put_user(0, p);
+		break;
+	case WDIOC_SETOPTIONS:
+		if (get_user(value, p))
+			return -EFAULT;
+		if (value & WDIOS_ENABLECARD)
+			mtx1_wdt_start();
+		else if (value & WDIOS_DISABLECARD)
+			mtx1_wdt_stop();
+		else
+			return -EINVAL;
+		return 0;
+	case WDIOC_KEEPALIVE:
+		mtx1_wdt_reset();
+		break;
+	default:
+		return -ENOTTY;
 	}
 	return 0;
 }
 
 
-static ssize_t mtx1_wdt_write(struct file *file, const char *buf, size_t count, loff_t *ppos)
+static ssize_t mtx1_wdt_write(struct file *file, const char *buf,
+						size_t count, loff_t *ppos)
 {
 	if (!count)
 		return -EIO;
-
 	mtx1_wdt_reset();
 	return count;
 }
@@ -188,17 +188,17 @@ static ssize_t mtx1_wdt_write(struct file *file, const char *buf, size_t count,
 static const struct file_operations mtx1_wdt_fops = {
 	.owner 		= THIS_MODULE,
 	.llseek		= no_llseek,
-	.ioctl		= mtx1_wdt_ioctl,
+	.unlocked_ioctl	= mtx1_wdt_ioctl,
 	.open 		= mtx1_wdt_open,
 	.write 		= mtx1_wdt_write,
-	.release 	= mtx1_wdt_release
+	.release 	= mtx1_wdt_release,
 };
 
 
 static struct miscdevice mtx1_wdt_misc = {
 	.minor 	= WATCHDOG_MINOR,
 	.name 	= "watchdog",
-	.fops 	= &mtx1_wdt_fops
+	.fops 	= &mtx1_wdt_fops,
 };
 
 
@@ -208,29 +208,26 @@ static int mtx1_wdt_probe(struct platform_device *pdev)
 
 	mtx1_wdt_device.gpio = pdev->resource[0].start;
 
-	if ((ret = misc_register(&mtx1_wdt_misc)) < 0) {
-		printk(KERN_ERR " mtx-1_wdt : failed to register\n");
-		return ret;
-	}
-
+	spin_lock_init(&mtx1_wdt_device.lock);
 	init_completion(&mtx1_wdt_device.stop);
 	mtx1_wdt_device.queue = 0;
-
 	clear_bit(0, &mtx1_wdt_device.inuse);
-
 	setup_timer(&mtx1_wdt_device.timer, mtx1_wdt_trigger, 0L);
-
 	mtx1_wdt_device.default_ticks = ticks;
 
+	ret = misc_register(&mtx1_wdt_misc);
+	if (ret < 0) {
+		printk(KERN_ERR " mtx-1_wdt : failed to register\n");
+		return ret;
+	}
 	mtx1_wdt_start();
-
 	printk(KERN_INFO "MTX-1 Watchdog driver\n");
-
 	return 0;
 }
 
 static int mtx1_wdt_remove(struct platform_device *pdev)
 {
+	/* FIXME: do we need to lock this test ? */
 	if (mtx1_wdt_device.queue) {
 		mtx1_wdt_device.queue = 0;
 		wait_for_completion(&mtx1_wdt_device.stop);
diff --git a/drivers/watchdog/mv64x60_wdt.c b/drivers/watchdog/mv64x60_wdt.c
index b59ca3273967..acf589dc057c 100644
--- a/drivers/watchdog/mv64x60_wdt.c
+++ b/drivers/watchdog/mv64x60_wdt.c
@@ -8,7 +8,7 @@
  * and services the watchdog.
  *
  * Derived from mpc8xx_wdt.c, with the following copyright.
- * 
+ *
  * 2002 (c) Florian Schirmer <jolt@tuxbox.org> This file is licensed under
  * the terms of the GNU General Public License version 2. This program
  * is licensed "as is" without any warranty of any kind, whether express
@@ -22,10 +22,9 @@
 #include <linux/module.h>
 #include <linux/watchdog.h>
 #include <linux/platform_device.h>
-
 #include <linux/mv643xx.h>
-#include <asm/uaccess.h>
-#include <asm/io.h>
+#include <linux/uaccess.h>
+#include <linux/io.h>
 
 #define MV64x60_WDT_WDC_OFFSET	0
 
@@ -61,7 +60,9 @@ static DEFINE_SPINLOCK(mv64x60_wdt_spinlock);
 
 static int nowayout = WATCHDOG_NOWAYOUT;
 module_param(nowayout, int, 0);
-MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=" __MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
+MODULE_PARM_DESC(nowayout,
+		"Watchdog cannot be stopped once started (default="
+				__MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
 
 static int mv64x60_wdt_toggle_wdc(int enabled_predicate, int field_shift)
 {
@@ -150,7 +151,7 @@ static int mv64x60_wdt_release(struct inode *inode, struct file *file)
 }
 
 static ssize_t mv64x60_wdt_write(struct file *file, const char __user *data,
-				 size_t len, loff_t * ppos)
+				 size_t len, loff_t *ppos)
 {
 	if (len) {
 		if (!nowayout) {
@@ -160,7 +161,7 @@ static ssize_t mv64x60_wdt_write(struct file *file, const char __user *data,
 
 			for (i = 0; i != len; i++) {
 				char c;
-				if(get_user(c, data + i))
+				if (get_user(c, data + i))
 					return -EFAULT;
 				if (c == 'V')
 					expect_close = 42;
@@ -172,8 +173,8 @@ static ssize_t mv64x60_wdt_write(struct file *file, const char __user *data,
 	return len;
 }
 
-static int mv64x60_wdt_ioctl(struct inode *inode, struct file *file,
-			     unsigned int cmd, unsigned long arg)
+static long mv64x60_wdt_ioctl(struct file *file,
+					unsigned int cmd, unsigned long arg)
 {
 	int timeout;
 	int options;
@@ -240,7 +241,7 @@ static const struct file_operations mv64x60_wdt_fops = {
 	.owner = THIS_MODULE,
 	.llseek = no_llseek,
 	.write = mv64x60_wdt_write,
-	.ioctl = mv64x60_wdt_ioctl,
+	.unlocked_ioctl = mv64x60_wdt_ioctl,
 	.open = mv64x60_wdt_open,
 	.release = mv64x60_wdt_release,
 };
diff --git a/drivers/watchdog/omap_wdt.c b/drivers/watchdog/omap_wdt.c
index 74bc39aa1ce8..3a11dadfd8e7 100644
--- a/drivers/watchdog/omap_wdt.c
+++ b/drivers/watchdog/omap_wdt.c
@@ -40,12 +40,10 @@
 #include <linux/moduleparam.h>
 #include <linux/clk.h>
 #include <linux/bitops.h>
-
-#include <asm/io.h>
-#include <asm/uaccess.h>
-#include <asm/hardware.h>
-
-#include <asm/arch/prcm.h>
+#include <linux/io.h>
+#include <linux/uaccess.h>
+#include <mach/hardware.h>
+#include <mach/prcm.h>
 
 #include "omap_wdt.h"
 
@@ -54,11 +52,12 @@ module_param(timer_margin, uint, 0);
 MODULE_PARM_DESC(timer_margin, "initial watchdog timeout (in seconds)");
 
 static int omap_wdt_users;
-static struct clk *armwdt_ck = NULL;
-static struct clk *mpu_wdt_ick = NULL;
-static struct clk *mpu_wdt_fck = NULL;
+static struct clk *armwdt_ck;
+static struct clk *mpu_wdt_ick;
+static struct clk *mpu_wdt_fck;
 
 static unsigned int wdt_trgr_pattern = 0x1234;
+static spinlock_t wdt_lock;
 
 static void omap_wdt_ping(void)
 {
@@ -174,30 +173,29 @@ static int omap_wdt_release(struct inode *inode, struct file *file)
 	return 0;
 }
 
-static ssize_t
-omap_wdt_write(struct file *file, const char __user *data,
+static ssize_t omap_wdt_write(struct file *file, const char __user *data,
 		size_t len, loff_t *ppos)
 {
 	/* Refresh LOAD_TIME. */
-	if (len)
+	if (len) {
+		spin_lock(&wdt_lock);
 		omap_wdt_ping();
+		spin_unlock(&wdt_lock);
+	}
 	return len;
 }
 
-static int
-omap_wdt_ioctl(struct inode *inode, struct file *file,
-	unsigned int cmd, unsigned long arg)
+static long omap_wdt_ioctl(struct file *file, unsigned int cmd,
+						unsigned long arg)
 {
 	int new_margin;
-	static struct watchdog_info ident = {
+	static const struct watchdog_info ident = {
 		.identity = "OMAP Watchdog",
 		.options = WDIOF_SETTIMEOUT,
 		.firmware_version = 0,
 	};
 
 	switch (cmd) {
-	default:
-		return -ENOTTY;
 	case WDIOC_GETSUPPORT:
 		return copy_to_user((struct watchdog_info __user *)arg, &ident,
 				sizeof(ident));
@@ -211,28 +209,34 @@ omap_wdt_ioctl(struct inode *inode, struct file *file,
 			return put_user(omap_prcm_get_reset_sources(),
 					(int __user *)arg);
 	case WDIOC_KEEPALIVE:
+		spin_lock(&wdt_lock);
 		omap_wdt_ping();
+		spin_unlock(&wdt_lock);
 		return 0;
 	case WDIOC_SETTIMEOUT:
 		if (get_user(new_margin, (int __user *)arg))
 			return -EFAULT;
 		omap_wdt_adjust_timeout(new_margin);
 
+		spin_lock(&wdt_lock);
 		omap_wdt_disable();
 		omap_wdt_set_timeout();
 		omap_wdt_enable();
 
 		omap_wdt_ping();
+		spin_unlock(&wdt_lock);
 		/* Fall */
 	case WDIOC_GETTIMEOUT:
 		return put_user(timer_margin, (int __user *)arg);
+	default:
+		return -ENOTTY;
 	}
 }
 
 static const struct file_operations omap_wdt_fops = {
 	.owner = THIS_MODULE,
 	.write = omap_wdt_write,
-	.ioctl = omap_wdt_ioctl,
+	.unlocked_ioctl = omap_wdt_ioctl,
 	.open = omap_wdt_open,
 	.release = omap_wdt_release,
 };
@@ -240,7 +244,7 @@ static const struct file_operations omap_wdt_fops = {
 static struct miscdevice omap_wdt_miscdev = {
 	.minor = WATCHDOG_MINOR,
 	.name = "watchdog",
-	.fops = &omap_wdt_fops
+	.fops = &omap_wdt_fops,
 };
 
 static int __init omap_wdt_probe(struct platform_device *pdev)
@@ -373,6 +377,7 @@ static struct platform_driver omap_wdt_driver = {
 
 static int __init omap_wdt_init(void)
 {
+	spin_lock_init(&wdt_lock);
 	return platform_driver_register(&omap_wdt_driver);
 }
 
diff --git a/drivers/watchdog/pc87413_wdt.c b/drivers/watchdog/pc87413_wdt.c
index 15e4f8887a9e..484c215e9f3f 100644
--- a/drivers/watchdog/pc87413_wdt.c
+++ b/drivers/watchdog/pc87413_wdt.c
@@ -30,15 +30,14 @@
 #include <linux/init.h>
 #include <linux/spinlock.h>
 #include <linux/moduleparam.h>
-#include <linux/version.h>
+#include <linux/io.h>
+#include <linux/uaccess.h>
 
-#include <asm/io.h>
-#include <asm/uaccess.h>
 #include <asm/system.h>
 
 /* #define DEBUG 1 */
 
-#define DEFAULT_TIMEOUT     1            /* 1 minute */
+#define DEFAULT_TIMEOUT     1		/* 1 minute */
 #define MAX_TIMEOUT         255
 
 #define VERSION             "1.1"
@@ -46,22 +45,22 @@
 #define PFX                 MODNAME ": "
 #define DPFX                MODNAME " - DEBUG: "
 
-#define WDT_INDEX_IO_PORT   (io+0)       /* I/O port base (index register) */
+#define WDT_INDEX_IO_PORT   (io+0)	/* I/O port base (index register) */
 #define WDT_DATA_IO_PORT    (WDT_INDEX_IO_PORT+1)
 #define SWC_LDN             0x04
-#define SIOCFG2             0x22         /* Serial IO register */
-#define WDCTL               0x10         /* Watchdog-Timer-Controll-Register */
-#define WDTO                0x11         /* Watchdog timeout register */
-#define WDCFG               0x12         /* Watchdog config register */
+#define SIOCFG2             0x22	/* Serial IO register */
+#define WDCTL               0x10	/* Watchdog-Timer-Controll-Register */
+#define WDTO                0x11	/* Watchdog timeout register */
+#define WDCFG               0x12	/* Watchdog config register */
 
-static int io = 0x2E;		         /* Address used on Portwell Boards */
+static int io = 0x2E;			/* Address used on Portwell Boards */
 
-static int timeout = DEFAULT_TIMEOUT;    /* timeout value */
-static unsigned long timer_enabled = 0;  /* is the timer enabled? */
+static int timeout = DEFAULT_TIMEOUT;	/* timeout value */
+static unsigned long timer_enabled;	/* is the timer enabled? */
 
-static char expect_close;                /* is the close expected? */
+static char expect_close;		/* is the close expected? */
 
-static DEFINE_SPINLOCK(io_lock);/* to guard the watchdog from io races */
+static DEFINE_SPINLOCK(io_lock);	/* to guard us from io races */
 
 static int nowayout = WATCHDOG_NOWAYOUT;
 
@@ -69,7 +68,7 @@ static int nowayout = WATCHDOG_NOWAYOUT;
 
 /* Select pins for Watchdog output */
 
-static inline void pc87413_select_wdt_out (void)
+static inline void pc87413_select_wdt_out(void)
 {
 	unsigned int cr_data = 0;
 
@@ -77,7 +76,7 @@ static inline void pc87413_select_wdt_out (void)
 
 	outb_p(SIOCFG2, WDT_INDEX_IO_PORT);
 
-	cr_data = inb (WDT_DATA_IO_PORT);
+	cr_data = inb(WDT_DATA_IO_PORT);
 
 	cr_data |= 0x80; /* Set Bit7 to 1*/
 	outb_p(SIOCFG2, WDT_INDEX_IO_PORT);
@@ -85,8 +84,9 @@ static inline void pc87413_select_wdt_out (void)
 	outb_p(cr_data, WDT_DATA_IO_PORT);
 
 #ifdef DEBUG
-	printk(KERN_INFO DPFX "Select multiple pin,pin55,as WDT output:"
-	                      " Bit7 to 1: %d\n", cr_data);
+	printk(KERN_INFO DPFX
+		"Select multiple pin,pin55,as WDT output: Bit7 to 1: %d\n",
+								cr_data);
 #endif
 }
 
@@ -94,18 +94,18 @@ static inline void pc87413_select_wdt_out (void)
 
 static inline void pc87413_enable_swc(void)
 {
-	unsigned int cr_data=0;
+	unsigned int cr_data = 0;
 
 	/* Step 2: Enable SWC functions */
 
-	outb_p(0x07, WDT_INDEX_IO_PORT);        /* Point SWC_LDN (LDN=4) */
+	outb_p(0x07, WDT_INDEX_IO_PORT);	/* Point SWC_LDN (LDN=4) */
 	outb_p(SWC_LDN, WDT_DATA_IO_PORT);
 
-	outb_p(0x30, WDT_INDEX_IO_PORT);        /* Read Index 0x30 First */
+	outb_p(0x30, WDT_INDEX_IO_PORT);	/* Read Index 0x30 First */
 	cr_data = inb(WDT_DATA_IO_PORT);
-	cr_data |= 0x01;                        /* Set Bit0 to 1 */
+	cr_data |= 0x01;			/* Set Bit0 to 1 */
 	outb_p(0x30, WDT_INDEX_IO_PORT);
-	outb_p(cr_data, WDT_DATA_IO_PORT);      /* Index0x30_bit0P1 */
+	outb_p(cr_data, WDT_DATA_IO_PORT);	/* Index0x30_bit0P1 */
 
 #ifdef DEBUG
 	printk(KERN_INFO DPFX "pc87413 - Enable SWC functions\n");
@@ -121,20 +121,19 @@ static inline unsigned int pc87413_get_swc_base(void)
 
 	/* Step 3: Read SWC I/O Base Address */
 
-	outb_p(0x60, WDT_INDEX_IO_PORT);        /* Read Index 0x60 */
+	outb_p(0x60, WDT_INDEX_IO_PORT);	/* Read Index 0x60 */
 	addr_h = inb(WDT_DATA_IO_PORT);
 
-	outb_p(0x61, WDT_INDEX_IO_PORT);        /* Read Index 0x61 */
+	outb_p(0x61, WDT_INDEX_IO_PORT);	/* Read Index 0x61 */
 
 	addr_l = inb(WDT_DATA_IO_PORT);
 
 	swc_base_addr = (addr_h << 8) + addr_l;
-
 #ifdef DEBUG
-	printk(KERN_INFO DPFX "Read SWC I/O Base Address: low %d, high %d,"
-	                      " res %d\n", addr_l, addr_h, swc_base_addr);
+	printk(KERN_INFO DPFX
+		"Read SWC I/O Base Address: low %d, high %d, res %d\n",
+						addr_l, addr_h, swc_base_addr);
 #endif
-
 	return swc_base_addr;
 }
 
@@ -143,9 +142,7 @@ static inline unsigned int pc87413_get_swc_base(void)
 static inline void pc87413_swc_bank3(unsigned int swc_base_addr)
 {
 	/* Step 4: Select Bank3 of SWC */
-
 	outb_p(inb(swc_base_addr + 0x0f) | 0x03, swc_base_addr + 0x0f);
-
 #ifdef DEBUG
 	printk(KERN_INFO DPFX "Select Bank3 of SWC\n");
 #endif
@@ -157,9 +154,7 @@ static inline void pc87413_programm_wdto(unsigned int swc_base_addr,
 					 char pc87413_time)
 {
 	/* Step 5: Programm WDTO, Twd. */
-
 	outb_p(pc87413_time, swc_base_addr + WDTO);
-
 #ifdef DEBUG
 	printk(KERN_INFO DPFX "Set WDTO to %d minutes\n", pc87413_time);
 #endif
@@ -170,9 +165,7 @@ static inline void pc87413_programm_wdto(unsigned int swc_base_addr,
 static inline void pc87413_enable_wden(unsigned int swc_base_addr)
 {
 	/* Step 6: Enable WDEN */
-
-	outb_p(inb (swc_base_addr + WDCTL) | 0x01, swc_base_addr + WDCTL);
-
+	outb_p(inb(swc_base_addr + WDCTL) | 0x01, swc_base_addr + WDCTL);
 #ifdef DEBUG
 	printk(KERN_INFO DPFX "Enable WDEN\n");
 #endif
@@ -182,9 +175,7 @@ static inline void pc87413_enable_wden(unsigned int swc_base_addr)
 static inline void pc87413_enable_sw_wd_tren(unsigned int swc_base_addr)
 {
 	/* Enable SW_WD_TREN */
-
-	outb_p(inb (swc_base_addr + WDCFG) | 0x80, swc_base_addr + WDCFG);
-
+	outb_p(inb(swc_base_addr + WDCFG) | 0x80, swc_base_addr + WDCFG);
 #ifdef DEBUG
 	printk(KERN_INFO DPFX "Enable SW_WD_TREN\n");
 #endif
@@ -195,9 +186,7 @@ static inline void pc87413_enable_sw_wd_tren(unsigned int swc_base_addr)
 static inline void pc87413_disable_sw_wd_tren(unsigned int swc_base_addr)
 {
 	/* Disable SW_WD_TREN */
-
-	outb_p(inb (swc_base_addr + WDCFG) & 0x7f, swc_base_addr + WDCFG);
-
+	outb_p(inb(swc_base_addr + WDCFG) & 0x7f, swc_base_addr + WDCFG);
 #ifdef DEBUG
 	printk(KERN_INFO DPFX "pc87413 - Disable SW_WD_TREN\n");
 #endif
@@ -208,9 +197,7 @@ static inline void pc87413_disable_sw_wd_tren(unsigned int swc_base_addr)
 static inline void pc87413_enable_sw_wd_trg(unsigned int swc_base_addr)
 {
 	/* Enable SW_WD_TRG */
-
-	outb_p(inb (swc_base_addr + WDCTL) | 0x80, swc_base_addr + WDCTL);
-
+	outb_p(inb(swc_base_addr + WDCTL) | 0x80, swc_base_addr + WDCTL);
 #ifdef DEBUG
 	printk(KERN_INFO DPFX "pc87413 - Enable SW_WD_TRG\n");
 #endif
@@ -221,9 +208,7 @@ static inline void pc87413_enable_sw_wd_trg(unsigned int swc_base_addr)
 static inline void pc87413_disable_sw_wd_trg(unsigned int swc_base_addr)
 {
 	/* Disable SW_WD_TRG */
-
-	outb_p(inb (swc_base_addr + WDCTL) & 0x7f, swc_base_addr + WDCTL);
-
+	outb_p(inb(swc_base_addr + WDCTL) & 0x7f, swc_base_addr + WDCTL);
 #ifdef DEBUG
 	printk(KERN_INFO DPFX "Disable SW_WD_TRG\n");
 #endif
@@ -314,8 +299,8 @@ static int pc87413_open(struct inode *inode, struct file *file)
 	/* Reload and activate timer */
 	pc87413_refresh();
 
-	printk(KERN_INFO MODNAME "Watchdog enabled. Timeout set to"
-	                         " %d minute(s).\n", timeout);
+	printk(KERN_INFO MODNAME
+		"Watchdog enabled. Timeout set to %d minute(s).\n", timeout);
 
 	return nonseekable_open(inode, file);
 }
@@ -338,17 +323,15 @@ static int pc87413_release(struct inode *inode, struct file *file)
 
 	if (expect_close == 42) {
 		pc87413_disable();
-		printk(KERN_INFO MODNAME "Watchdog disabled,"
-		                         " sleeping again...\n");
+		printk(KERN_INFO MODNAME
+				"Watchdog disabled, sleeping again...\n");
 	} else {
-		printk(KERN_CRIT MODNAME "Unexpected close, not stopping"
-		                         " watchdog!\n");
+		printk(KERN_CRIT MODNAME
+				"Unexpected close, not stopping watchdog!\n");
 		pc87413_refresh();
 	}
-
 	clear_bit(0, &timer_enabled);
 	expect_close = 0;
-
 	return 0;
 }
 
@@ -386,10 +369,11 @@ static ssize_t pc87413_write(struct file *file, const char __user *data,
 			/* reset expect flag */
 			expect_close = 0;
 
-			/* scan to see whether or not we got the magic character */
+			/* scan to see whether or not we got the
+			   magic character */
 			for (i = 0; i != len; i++) {
 				char c;
-				if (get_user(c, data+i))
+				if (get_user(c, data + i))
 					return -EFAULT;
 				if (c == 'V')
 					expect_close = 42;
@@ -404,7 +388,6 @@ static ssize_t pc87413_write(struct file *file, const char __user *data,
 
 /**
  *	pc87413_ioctl:
- *	@inode: inode of the device
  *	@file: file handle to the device
  *	@cmd: watchdog command
  *	@arg: argument pointer
@@ -414,8 +397,8 @@ static ssize_t pc87413_write(struct file *file, const char __user *data,
  *	querying capabilities and current status.
  */
 
-static int pc87413_ioctl(struct inode *inode, struct file *file,
-			 unsigned int cmd, unsigned long arg)
+static long pc87413_ioctl(struct file *file, unsigned int cmd,
+						unsigned long arg)
 {
 	int new_timeout;
 
@@ -426,75 +409,58 @@ static int pc87413_ioctl(struct inode *inode, struct file *file,
 
 	static struct watchdog_info ident = {
 		.options          = WDIOF_KEEPALIVEPING |
-		                    WDIOF_SETTIMEOUT |
-		                    WDIOF_MAGICCLOSE,
+				    WDIOF_SETTIMEOUT |
+				    WDIOF_MAGICCLOSE,
 		.firmware_version = 1,
-		.identity         = "PC87413(HF/F) watchdog"
+		.identity         = "PC87413(HF/F) watchdog",
 	};
 
 	uarg.i = (int __user *)arg;
 
-	switch(cmd) {
-		default:
-			return -ENOTTY;
-
-		case WDIOC_GETSUPPORT:
-			return copy_to_user(uarg.ident, &ident,
-				sizeof(ident)) ? -EFAULT : 0;
-
-		case WDIOC_GETSTATUS:
-			return put_user(pc87413_status(), uarg.i);
-
-		case WDIOC_GETBOOTSTATUS:
-			return put_user(0, uarg.i);
-
-		case WDIOC_KEEPALIVE:
-			pc87413_refresh();
+	switch (cmd) {
+	case WDIOC_GETSUPPORT:
+		return copy_to_user(uarg.ident, &ident,
+					sizeof(ident)) ? -EFAULT : 0;
+	case WDIOC_GETSTATUS:
+		return put_user(pc87413_status(), uarg.i);
+	case WDIOC_GETBOOTSTATUS:
+		return put_user(0, uarg.i);
+	case WDIOC_SETOPTIONS:
+	{
+		int options, retval = -EINVAL;
+		if (get_user(options, uarg.i))
+			return -EFAULT;
+		if (options & WDIOS_DISABLECARD) {
+			pc87413_disable();
+			retval = 0;
+		}
+		if (options & WDIOS_ENABLECARD) {
+			pc87413_enable();
+			retval = 0;
+		}
+		return retval;
+	}
+	case WDIOC_KEEPALIVE:
+		pc87413_refresh();
 #ifdef DEBUG
-	                printk(KERN_INFO DPFX "keepalive\n");
+		printk(KERN_INFO DPFX "keepalive\n");
 #endif
-			return 0;
-
-		case WDIOC_SETTIMEOUT:
-			if (get_user(new_timeout, uarg.i))
-				return -EFAULT;
-
-			// the API states this is given in secs
-			new_timeout /= 60;
-
-			if (new_timeout < 0 || new_timeout > MAX_TIMEOUT)
-				return -EINVAL;
-
-			timeout = new_timeout;
-			pc87413_refresh();
-
-			// fall through and return the new timeout...
-
-		case WDIOC_GETTIMEOUT:
-
-		        new_timeout = timeout * 60;
-
-			return put_user(new_timeout, uarg.i);
-
-		case WDIOC_SETOPTIONS:
-		{
-			int options, retval = -EINVAL;
-
-			if (get_user(options, uarg.i))
-				return -EFAULT;
-
-			if (options & WDIOS_DISABLECARD) {
-			        pc87413_disable();
-				retval = 0;
-			}
-
-			if (options & WDIOS_ENABLECARD) {
-				pc87413_enable();
-				retval = 0;
-			}
-
-			return retval;
-		}
+		return 0;
+	case WDIOC_SETTIMEOUT:
+		if (get_user(new_timeout, uarg.i))
+			return -EFAULT;
+		/* the API states this is given in secs */
+		new_timeout /= 60;
+		if (new_timeout < 0 || new_timeout > MAX_TIMEOUT)
+			return -EINVAL;
+		timeout = new_timeout;
+		pc87413_refresh();
+		/* fall through and return the new timeout... */
+	case WDIOC_GETTIMEOUT:
+		new_timeout = timeout * 60;
+		return put_user(new_timeout, uarg.i);
+	default:
+		return -ENOTTY;
 	}
 }
 
@@ -517,10 +483,8 @@ static int pc87413_notify_sys(struct notifier_block *this,
 			      void *unused)
 {
 	if (code == SYS_DOWN || code == SYS_HALT)
-	{
 		/* Turn the card off */
 		pc87413_disable();
-	}
 	return NOTIFY_DONE;
 }
 
@@ -530,21 +494,19 @@ static const struct file_operations pc87413_fops = {
 	.owner		= THIS_MODULE,
 	.llseek		= no_llseek,
 	.write		= pc87413_write,
-	.ioctl		= pc87413_ioctl,
+	.unlocked_ioctl	= pc87413_ioctl,
 	.open		= pc87413_open,
 	.release	= pc87413_release,
 };
 
-static struct notifier_block pc87413_notifier =
-{
+static struct notifier_block pc87413_notifier = {
 	.notifier_call  = pc87413_notify_sys,
 };
 
-static struct miscdevice pc87413_miscdev=
-{
+static struct miscdevice pc87413_miscdev = {
 	.minor          = WATCHDOG_MINOR,
 	.name           = "watchdog",
-	.fops           = &pc87413_fops
+	.fops           = &pc87413_fops,
 };
 
 /* -- Module init functions -------------------------------------*/
@@ -561,29 +523,26 @@ static int __init pc87413_init(void)
 {
 	int ret;
 
-	printk(KERN_INFO PFX "Version " VERSION " at io 0x%X\n", WDT_INDEX_IO_PORT);
+	printk(KERN_INFO PFX "Version " VERSION " at io 0x%X\n",
+							WDT_INDEX_IO_PORT);
 
 	/* request_region(io, 2, "pc87413"); */
 
 	ret = register_reboot_notifier(&pc87413_notifier);
 	if (ret != 0) {
-		printk(KERN_ERR PFX "cannot register reboot notifier (err=%d)\n",
-			ret);
+		printk(KERN_ERR PFX
+			"cannot register reboot notifier (err=%d)\n", ret);
 	}
 
 	ret = misc_register(&pc87413_miscdev);
-
 	if (ret != 0) {
 		printk(KERN_ERR PFX "cannot register miscdev on minor=%d (err=%d)\n",
 			WATCHDOG_MINOR, ret);
 		unregister_reboot_notifier(&pc87413_notifier);
 		return ret;
 	}
-
 	printk(KERN_INFO PFX "initialized. timeout=%d min \n", timeout);
-
 	pc87413_enable();
-
 	return 0;
 }
 
@@ -600,17 +559,16 @@ static int __init pc87413_init(void)
 static void __exit pc87413_exit(void)
 {
 	/* Stop the timer before we leave */
-	if (!nowayout)
-	{
+	if (!nowayout) {
 		pc87413_disable();
 		printk(KERN_INFO MODNAME "Watchdog disabled.\n");
 	}
 
 	misc_deregister(&pc87413_miscdev);
 	unregister_reboot_notifier(&pc87413_notifier);
-	/* release_region(io,2); */
+	/* release_region(io, 2); */
 
-	printk(MODNAME " watchdog component driver removed.\n");
+	printk(KERN_INFO MODNAME " watchdog component driver removed.\n");
 }
 
 module_init(pc87413_init);
@@ -626,8 +584,12 @@ module_param(io, int, 0);
 MODULE_PARM_DESC(io, MODNAME " I/O port (default: " __MODULE_STRING(io) ").");
 
 module_param(timeout, int, 0);
-MODULE_PARM_DESC(timeout, "Watchdog timeout in minutes (default=" __MODULE_STRING(timeout) ").");
+MODULE_PARM_DESC(timeout,
+		"Watchdog timeout in minutes (default="
+				__MODULE_STRING(timeout) ").");
 
 module_param(nowayout, int, 0);
-MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=" __MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
+MODULE_PARM_DESC(nowayout,
+		"Watchdog cannot be stopped once started (default="
+				__MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
 
diff --git a/drivers/watchdog/pcwd.c b/drivers/watchdog/pcwd.c
index 7b41434fac8c..9e1331a3b215 100644
--- a/drivers/watchdog/pcwd.c
+++ b/drivers/watchdog/pcwd.c
@@ -40,13 +40,15 @@
  *		fairly useless proc entry.
  * 990610	removed said useless proc code for the merge <alan>
  * 000403	Removed last traces of proc code. <davej>
- * 011214	Added nowayout module option to override CONFIG_WATCHDOG_NOWAYOUT <Matt_Domsch@dell.com>
+ * 011214	Added nowayout module option to override
+ *		CONFIG_WATCHDOG_NOWAYOUT <Matt_Domsch@dell.com>
  *              Added timeout module option to override default
  */
 
 /*
  *	A bells and whistles driver is available from http://www.pcwd.de/
- *	More info available at http://www.berkprod.com/ or http://www.pcwatchdog.com/
+ *	More info available at http://www.berkprod.com/ or
+ *	http://www.pcwatchdog.com/
  */
 
 #include <linux/module.h>	/* For module specific items */
@@ -65,9 +67,8 @@
 #include <linux/isa.h>		/* For isa devices */
 #include <linux/ioport.h>	/* For io-port access */
 #include <linux/spinlock.h>	/* For spin_lock/spin_unlock/... */
-
-#include <asm/uaccess.h>	/* For copy_to_user/put_user/... */
-#include <asm/io.h>		/* For inb/outb/... */
+#include <linux/uaccess.h>	/* For copy_to_user/put_user/... */
+#include <linux/io.h>		/* For inb/outb/... */
 
 /* Module and version information */
 #define WATCHDOG_VERSION "1.20"
@@ -111,14 +112,16 @@ static int pcwd_ioports[] = { 0x270, 0x350, 0x370, 0x000 };
 #define WD_REVC_WTRP		0x01	/* Watchdog Trip status */
 #define WD_REVC_HRBT		0x02	/* Watchdog Heartbeat */
 #define WD_REVC_TTRP		0x04	/* Temperature Trip status */
-#define WD_REVC_RL2A		0x08	/* Relay 2 activated by on-board processor */
+#define WD_REVC_RL2A		0x08	/* Relay 2 activated by
+							on-board processor */
 #define WD_REVC_RL1A		0x10	/* Relay 1 active */
 #define WD_REVC_R2DS		0x40	/* Relay 2 disable */
 #define WD_REVC_RLY2		0x80	/* Relay 2 activated? */
 /* Port 2 : Control Status #2 */
 #define WD_WDIS			0x10	/* Watchdog Disabled */
 #define WD_ENTP			0x20	/* Watchdog Enable Temperature Trip */
-#define WD_SSEL			0x40	/* Watchdog Switch Select (1:SW1 <-> 0:SW2) */
+#define WD_SSEL			0x40	/* Watchdog Switch Select
+							(1:SW1 <-> 0:SW2) */
 #define WD_WCMD			0x80	/* Watchdog Command Mode */
 
 /* max. time we give an ISA watchdog card to process a command */
@@ -142,7 +145,7 @@ static int pcwd_ioports[] = { 0x270, 0x350, 0x370, 0x000 };
 #define CMD_ISA_RESET_RELAYS		0x0D
 
 /* Watchdog's Dip Switch heartbeat values */
-static const int heartbeat_tbl [] = {
+static const int heartbeat_tbl[] = {
 	20,	/* OFF-OFF-OFF	= 20 Sec  */
 	40,	/* OFF-OFF-ON	= 40 Sec  */
 	60,	/* OFF-ON-OFF	=  1 Min  */
@@ -165,14 +168,18 @@ static const int heartbeat_tbl [] = {
 static int cards_found;
 
 /* internal variables */
-static atomic_t open_allowed = ATOMIC_INIT(1);
+static unsigned long open_allowed;
 static char expect_close;
 static int temp_panic;
-static struct {				/* this is private data for each ISA-PC watchdog card */
+
+/* this is private data for each ISA-PC watchdog card */
+static struct {
 	char fw_ver_str[6];		/* The cards firmware version */
 	int revision;			/* The card's revision */
-	int supports_temp;		/* Wether or not the card has a temperature device */
-	int command_mode;		/* Wether or not the card is in command mode */
+	int supports_temp;		/* Whether or not the card has
+						a temperature device */
+	int command_mode;		/* Whether or not the card is in
+						command mode */
 	int boot_status;		/* The card's boot status */
 	int io_addr;			/* The cards I/O address */
 	spinlock_t io_lock;		/* the lock for io operations */
@@ -186,16 +193,20 @@ static struct {				/* this is private data for each ISA-PC watchdog card */
 #define DEBUG	2	/* print fancy stuff too */
 static int debug = QUIET;
 module_param(debug, int, 0);
-MODULE_PARM_DESC(debug, "Debug level: 0=Quiet, 1=Verbose, 2=Debug (default=0)");
+MODULE_PARM_DESC(debug,
+		"Debug level: 0=Quiet, 1=Verbose, 2=Debug (default=0)");
 
-#define WATCHDOG_HEARTBEAT 0		/* default heartbeat = delay-time from dip-switches */
+/* default heartbeat = delay-time from dip-switches */
+#define WATCHDOG_HEARTBEAT 0
 static int heartbeat = WATCHDOG_HEARTBEAT;
 module_param(heartbeat, int, 0);
-MODULE_PARM_DESC(heartbeat, "Watchdog heartbeat in seconds. (2<=heartbeat<=7200 or 0=delay-time from dip-switches, default=" __MODULE_STRING(WATCHDOG_HEARTBEAT) ")");
+MODULE_PARM_DESC(heartbeat, "Watchdog heartbeat in seconds. (2 <= heartbeat <= 7200 or 0=delay-time from dip-switches, default=" __MODULE_STRING(WATCHDOG_HEARTBEAT) ")");
 
 static int nowayout = WATCHDOG_NOWAYOUT;
 module_param(nowayout, int, 0);
-MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=" __MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
+MODULE_PARM_DESC(nowayout,
+		"Watchdog cannot be stopped once started (default="
+				__MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
 
 /*
  *	Internal functions
@@ -224,7 +235,7 @@ static int send_isa_command(int cmd)
 		if (port0 == last_port0)
 			break;	/* Data is stable */
 
-		udelay (250);
+		udelay(250);
 	}
 
 	if (debug >= DEBUG)
@@ -236,7 +247,7 @@ static int send_isa_command(int cmd)
 
 static int set_command_mode(void)
 {
-	int i, found=0, count=0;
+	int i, found = 0, count = 0;
 
 	/* Set the card into command mode */
 	spin_lock(&pcwd_private.io_lock);
@@ -261,7 +272,7 @@ static int set_command_mode(void)
 		printk(KERN_DEBUG PFX "command_mode=%d\n",
 				pcwd_private.command_mode);
 
-	return(found);
+	return found;
 }
 
 static void unset_command_mode(void)
@@ -296,7 +307,8 @@ static inline void pcwd_get_firmware(void)
 		ten = send_isa_command(CMD_ISA_VERSION_TENTH);
 		hund = send_isa_command(CMD_ISA_VERSION_HUNDRETH);
 		minor = send_isa_command(CMD_ISA_VERSION_MINOR);
-		sprintf(pcwd_private.fw_ver_str, "%c.%c%c%c", one, ten, hund, minor);
+		sprintf(pcwd_private.fw_ver_str, "%c.%c%c%c",
+					one, ten, hund, minor);
 	}
 	unset_command_mode();
 
@@ -305,7 +317,7 @@ static inline void pcwd_get_firmware(void)
 
 static inline int pcwd_get_option_switches(void)
 {
-	int option_switches=0;
+	int option_switches = 0;
 
 	if (set_command_mode()) {
 		/* Get switch settings */
@@ -313,7 +325,7 @@ static inline int pcwd_get_option_switches(void)
 	}
 
 	unset_command_mode();
-	return(option_switches);
+	return option_switches;
 }
 
 static void pcwd_show_card_info(void)
@@ -322,7 +334,9 @@ static void pcwd_show_card_info(void)
 
 	/* Get some extra info from the hardware (in command/debug/diag mode) */
 	if (pcwd_private.revision == PCWD_REVISION_A)
-		printk(KERN_INFO PFX "ISA-PC Watchdog (REV.A) detected at port 0x%04x\n", pcwd_private.io_addr);
+		printk(KERN_INFO PFX
+			"ISA-PC Watchdog (REV.A) detected at port 0x%04x\n",
+							pcwd_private.io_addr);
 	else if (pcwd_private.revision == PCWD_REVISION_C) {
 		pcwd_get_firmware();
 		printk(KERN_INFO PFX "ISA-PC Watchdog (REV.C) detected at port 0x%04x (Firmware version: %s)\n",
@@ -347,12 +361,15 @@ static void pcwd_show_card_info(void)
 		printk(KERN_INFO PFX "Previous reboot was caused by the card\n");
 
 	if (pcwd_private.boot_status & WDIOF_OVERHEAT) {
-		printk(KERN_EMERG PFX "Card senses a CPU Overheat. Panicking!\n");
-		printk(KERN_EMERG PFX "CPU Overheat\n");
+		printk(KERN_EMERG PFX
+			"Card senses a CPU Overheat. Panicking!\n");
+		printk(KERN_EMERG PFX
+			"CPU Overheat\n");
 	}
 
 	if (pcwd_private.boot_status == 0)
-		printk(KERN_INFO PFX "No previous trip detected - Cold boot or reset\n");
+		printk(KERN_INFO PFX
+			"No previous trip detected - Cold boot or reset\n");
 }
 
 static void pcwd_timer_ping(unsigned long data)
@@ -361,11 +378,12 @@ static void pcwd_timer_ping(unsigned long data)
 
 	/* If we got a heartbeat pulse within the WDT_INTERVAL
 	 * we agree to ping the WDT */
-	if(time_before(jiffies, pcwd_private.next_heartbeat)) {
+	if (time_before(jiffies, pcwd_private.next_heartbeat)) {
 		/* Ping the watchdog */
 		spin_lock(&pcwd_private.io_lock);
 		if (pcwd_private.revision == PCWD_REVISION_A) {
-			/*  Rev A cards are reset by setting the WD_WDRST bit in register 1 */
+			/*  Rev A cards are reset by setting the
+			    WD_WDRST bit in register 1 */
 			wdrst_stat = inb_p(pcwd_private.io_addr);
 			wdrst_stat &= 0x0F;
 			wdrst_stat |= WD_WDRST;
@@ -381,7 +399,8 @@ static void pcwd_timer_ping(unsigned long data)
 
 		spin_unlock(&pcwd_private.io_lock);
 	} else {
-		printk(KERN_WARNING PFX "Heartbeat lost! Will not ping the watchdog\n");
+		printk(KERN_WARNING PFX
+			"Heartbeat lost! Will not ping the watchdog\n");
 	}
 }
 
@@ -454,7 +473,7 @@ static int pcwd_keepalive(void)
 
 static int pcwd_set_heartbeat(int t)
 {
-	if ((t < 2) || (t > 7200)) /* arbitrary upper limit */
+	if (t < 2 || t > 7200) /* arbitrary upper limit */
 		return -EINVAL;
 
 	heartbeat = t;
@@ -470,7 +489,7 @@ static int pcwd_get_status(int *status)
 {
 	int control_status;
 
-	*status=0;
+	*status = 0;
 	spin_lock(&pcwd_private.io_lock);
 	if (pcwd_private.revision == PCWD_REVISION_A)
 		/* Rev A cards return status information from
@@ -494,9 +513,9 @@ static int pcwd_get_status(int *status)
 		if (control_status & WD_T110) {
 			*status |= WDIOF_OVERHEAT;
 			if (temp_panic) {
-				printk(KERN_INFO PFX "Temperature overheat trip!\n");
+				printk(KERN_INFO PFX
+					"Temperature overheat trip!\n");
 				kernel_power_off();
-				/* or should we just do a: panic(PFX "Temperature overheat trip!\n"); */
 			}
 		}
 	} else {
@@ -506,9 +525,9 @@ static int pcwd_get_status(int *status)
 		if (control_status & WD_REVC_TTRP) {
 			*status |= WDIOF_OVERHEAT;
 			if (temp_panic) {
-				printk(KERN_INFO PFX "Temperature overheat trip!\n");
+				printk(KERN_INFO PFX
+					"Temperature overheat trip!\n");
 				kernel_power_off();
-				/* or should we just do a: panic(PFX "Temperature overheat trip!\n"); */
 			}
 		}
 	}
@@ -524,18 +543,21 @@ static int pcwd_clear_status(void)
 		spin_lock(&pcwd_private.io_lock);
 
 		if (debug >= VERBOSE)
-			printk(KERN_INFO PFX "clearing watchdog trip status\n");
+			printk(KERN_INFO PFX
+					"clearing watchdog trip status\n");
 
 		control_status = inb_p(pcwd_private.io_addr + 1);
 
 		if (debug >= DEBUG) {
-			printk(KERN_DEBUG PFX "status was: 0x%02x\n", control_status);
+			printk(KERN_DEBUG PFX "status was: 0x%02x\n",
+				control_status);
 			printk(KERN_DEBUG PFX "sending: 0x%02x\n",
 				(control_status & WD_REVC_R2DS));
 		}
 
 		/* clear reset status & Keep Relay 2 disable state as it is */
-		outb_p((control_status & WD_REVC_R2DS), pcwd_private.io_addr + 1);
+		outb_p((control_status & WD_REVC_R2DS),
+						pcwd_private.io_addr + 1);
 
 		spin_unlock(&pcwd_private.io_lock);
 	}
@@ -572,8 +594,7 @@ static int pcwd_get_temperature(int *temperature)
  *	/dev/watchdog handling
  */
 
-static int pcwd_ioctl(struct inode *inode, struct file *file,
-		      unsigned int cmd, unsigned long arg)
+static long pcwd_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
 {
 	int rv;
 	int status;
@@ -590,12 +611,9 @@ static int pcwd_ioctl(struct inode *inode, struct file *file,
 		.identity =		"PCWD",
 	};
 
-	switch(cmd) {
-	default:
-		return -ENOTTY;
-
+	switch (cmd) {
 	case WDIOC_GETSUPPORT:
-		if(copy_to_user(argp, &ident, sizeof(ident)))
+		if (copy_to_user(argp, &ident, sizeof(ident)))
 			return -EFAULT;
 		return 0;
 
@@ -613,25 +631,22 @@ static int pcwd_ioctl(struct inode *inode, struct file *file,
 		return put_user(temperature, argp);
 
 	case WDIOC_SETOPTIONS:
-		if (pcwd_private.revision == PCWD_REVISION_C)
-		{
-			if(copy_from_user(&rv, argp, sizeof(int)))
+		if (pcwd_private.revision == PCWD_REVISION_C) {
+			if (get_user(rv, argp))
 				return -EFAULT;
 
-			if (rv & WDIOS_DISABLECARD)
-			{
-				return pcwd_stop();
+			if (rv & WDIOS_DISABLECARD) {
+				status = pcwd_stop();
+				if (status < 0)
+					return status;
 			}
-
-			if (rv & WDIOS_ENABLECARD)
-			{
-				return pcwd_start();
+			if (rv & WDIOS_ENABLECARD) {
+				status = pcwd_start();
+				if (status < 0)
+					return status;
 			}
-
 			if (rv & WDIOS_TEMPPANIC)
-			{
 				temp_panic = 1;
-			}
 		}
 		return -EINVAL;
 
@@ -651,6 +666,9 @@ static int pcwd_ioctl(struct inode *inode, struct file *file,
 
 	case WDIOC_GETTIMEOUT:
 		return put_user(heartbeat, argp);
+
+	default:
+		return -ENOTTY;
 	}
 
 	return 0;
@@ -682,16 +700,10 @@ static ssize_t pcwd_write(struct file *file, const char __user *buf, size_t len,
 
 static int pcwd_open(struct inode *inode, struct file *file)
 {
-	if (!atomic_dec_and_test(&open_allowed) ) {
-		if (debug >= VERBOSE)
-			printk(KERN_ERR PFX "Attempt to open already opened device.\n");
-		atomic_inc( &open_allowed );
+	if (test_and_set_bit(0, &open_allowed))
 		return -EBUSY;
-	}
-
 	if (nowayout)
 		__module_get(THIS_MODULE);
-
 	/* Activate */
 	pcwd_start();
 	pcwd_keepalive();
@@ -700,14 +712,15 @@ static int pcwd_open(struct inode *inode, struct file *file)
 
 static int pcwd_close(struct inode *inode, struct file *file)
 {
-	if (expect_close == 42) {
+	if (expect_close == 42)
 		pcwd_stop();
-	} else {
-		printk(KERN_CRIT PFX "Unexpected close, not stopping watchdog!\n");
+	else {
+		printk(KERN_CRIT PFX
+			"Unexpected close, not stopping watchdog!\n");
 		pcwd_keepalive();
 	}
 	expect_close = 0;
-	atomic_inc( &open_allowed );
+	clear_bit(0, &open_allowed);
 	return 0;
 }
 
@@ -750,7 +763,7 @@ static const struct file_operations pcwd_fops = {
 	.owner		= THIS_MODULE,
 	.llseek		= no_llseek,
 	.write		= pcwd_write,
-	.ioctl		= pcwd_ioctl,
+	.unlocked_ioctl	= pcwd_ioctl,
 	.open		= pcwd_open,
 	.release	= pcwd_close,
 };
@@ -788,7 +801,7 @@ static inline int get_revision(void)
 	 * presumes a floating bus reads as 0xff. */
 	if ((inb(pcwd_private.io_addr + 2) == 0xFF) ||
 	    (inb(pcwd_private.io_addr + 3) == 0xFF))
-		r=PCWD_REVISION_A;
+		r = PCWD_REVISION_A;
 	spin_unlock(&pcwd_private.io_lock);
 
 	return r;
@@ -803,7 +816,7 @@ static inline int get_revision(void)
  */
 static int __devinit pcwd_isa_match(struct device *dev, unsigned int id)
 {
-	int base_addr=pcwd_ioports[id];
+	int base_addr = pcwd_ioports[id];
 	int port0, last_port0;	/* Reg 0, in case it's REV A */
 	int port1, last_port1;	/* Register 1 for REV C cards */
 	int i;
@@ -813,7 +826,7 @@ static int __devinit pcwd_isa_match(struct device *dev, unsigned int id)
 		printk(KERN_DEBUG PFX "pcwd_isa_match id=%d\n",
 			id);
 
-	if (!request_region (base_addr, 4, "PCWD")) {
+	if (!request_region(base_addr, 4, "PCWD")) {
 		printk(KERN_INFO PFX "Port 0x%04x unavailable\n", base_addr);
 		return 0;
 	}
@@ -842,7 +855,7 @@ static int __devinit pcwd_isa_match(struct device *dev, unsigned int id)
 			}
 		}
 	}
-	release_region (base_addr, 4);
+	release_region(base_addr, 4);
 
 	return retval;
 }
@@ -857,7 +870,8 @@ static int __devinit pcwd_isa_probe(struct device *dev, unsigned int id)
 
 	cards_found++;
 	if (cards_found == 1)
-		printk(KERN_INFO PFX "v%s Ken Hollis (kenji@bitgate.com)\n", WD_VER);
+		printk(KERN_INFO PFX "v%s Ken Hollis (kenji@bitgate.com)\n",
+								WD_VER);
 
 	if (cards_found > 1) {
 		printk(KERN_ERR PFX "This driver only supports 1 device\n");
@@ -875,10 +889,11 @@ static int __devinit pcwd_isa_probe(struct device *dev, unsigned int id)
 	/* Check card's revision */
 	pcwd_private.revision = get_revision();
 
-	if (!request_region(pcwd_private.io_addr, (pcwd_private.revision == PCWD_REVISION_A) ? 2 : 4, "PCWD")) {
+	if (!request_region(pcwd_private.io_addr,
+		(pcwd_private.revision == PCWD_REVISION_A) ? 2 : 4, "PCWD")) {
 		printk(KERN_ERR PFX "I/O address 0x%04x already in use\n",
 			pcwd_private.io_addr);
-		ret=-EIO;
+		ret = -EIO;
 		goto error_request_region;
 	}
 
@@ -908,26 +923,30 @@ static int __devinit pcwd_isa_probe(struct device *dev, unsigned int id)
 	if (heartbeat == 0)
 		heartbeat = heartbeat_tbl[(pcwd_get_option_switches() & 0x07)];
 
-	/* Check that the heartbeat value is within it's range ; if not reset to the default */
+	/* Check that the heartbeat value is within it's range;
+	   if not reset to the default */
 	if (pcwd_set_heartbeat(heartbeat)) {
 		pcwd_set_heartbeat(WATCHDOG_HEARTBEAT);
-		printk(KERN_INFO PFX "heartbeat value must be 2<=heartbeat<=7200, using %d\n",
-			WATCHDOG_HEARTBEAT);
+		printk(KERN_INFO PFX
+		  "heartbeat value must be 2 <= heartbeat <= 7200, using %d\n",
+							WATCHDOG_HEARTBEAT);
 	}
 
 	if (pcwd_private.supports_temp) {
 		ret = misc_register(&temp_miscdev);
 		if (ret) {
-			printk(KERN_ERR PFX "cannot register miscdev on minor=%d (err=%d)\n",
-				TEMP_MINOR, ret);
+			printk(KERN_ERR PFX
+			    "cannot register miscdev on minor=%d (err=%d)\n",
+							TEMP_MINOR, ret);
 			goto error_misc_register_temp;
 		}
 	}
 
 	ret = misc_register(&pcwd_miscdev);
 	if (ret) {
-		printk(KERN_ERR PFX "cannot register miscdev on minor=%d (err=%d)\n",
-			WATCHDOG_MINOR, ret);
+		printk(KERN_ERR PFX
+			"cannot register miscdev on minor=%d (err=%d)\n",
+					WATCHDOG_MINOR, ret);
 		goto error_misc_register_watchdog;
 	}
 
@@ -940,7 +959,8 @@ error_misc_register_watchdog:
 	if (pcwd_private.supports_temp)
 		misc_deregister(&temp_miscdev);
 error_misc_register_temp:
-	release_region(pcwd_private.io_addr, (pcwd_private.revision == PCWD_REVISION_A) ? 2 : 4);
+	release_region(pcwd_private.io_addr,
+			(pcwd_private.revision == PCWD_REVISION_A) ? 2 : 4);
 error_request_region:
 	pcwd_private.io_addr = 0x0000;
 	cards_found--;
@@ -964,7 +984,8 @@ static int __devexit pcwd_isa_remove(struct device *dev, unsigned int id)
 	misc_deregister(&pcwd_miscdev);
 	if (pcwd_private.supports_temp)
 		misc_deregister(&temp_miscdev);
-	release_region(pcwd_private.io_addr, (pcwd_private.revision == PCWD_REVISION_A) ? 2 : 4);
+	release_region(pcwd_private.io_addr,
+			(pcwd_private.revision == PCWD_REVISION_A) ? 2 : 4);
 	pcwd_private.io_addr = 0x0000;
 	cards_found--;
 
diff --git a/drivers/watchdog/pcwd_pci.c b/drivers/watchdog/pcwd_pci.c
index 61a89e959642..90eb1d4271d7 100644
--- a/drivers/watchdog/pcwd_pci.c
+++ b/drivers/watchdog/pcwd_pci.c
@@ -46,9 +46,8 @@
 #include <linux/pci.h>		/* For pci functions */
 #include <linux/ioport.h>	/* For io-port access */
 #include <linux/spinlock.h>	/* For spin_lock/spin_unlock/... */
-
-#include <asm/uaccess.h>	/* For copy_to_user/put_user/... */
-#include <asm/io.h>		/* For inb/outb/... */
+#include <linux/uaccess.h>	/* For copy_to_user/put_user/... */
+#include <linux/io.h>		/* For inb/outb/... */
 
 /* Module and version information */
 #define WATCHDOG_VERSION "1.03"
@@ -97,7 +96,7 @@
 #define CMD_GET_CLEAR_RESET_COUNT		0x84
 
 /* Watchdog's Dip Switch heartbeat values */
-static const int heartbeat_tbl [] = {
+static const int heartbeat_tbl[] = {
 	5,	/* OFF-OFF-OFF	=  5 Sec  */
 	10,	/* OFF-OFF-ON	= 10 Sec  */
 	30,	/* OFF-ON-OFF	= 30 Sec  */
@@ -220,11 +219,10 @@ static void pcipcwd_show_card_info(void)
 	int option_switches;
 
 	got_fw_rev = send_command(CMD_GET_FIRMWARE_VERSION, &fw_rev_major, &fw_rev_minor);
-	if (got_fw_rev) {
+	if (got_fw_rev)
 		sprintf(fw_ver_str, "%u.%02u", fw_rev_major, fw_rev_minor);
-	} else {
+	else
 		sprintf(fw_ver_str, "<card no answer>");
-	}
 
 	/* Get switch settings */
 	option_switches = pcipcwd_get_option_switches();
@@ -331,7 +329,7 @@ static int pcipcwd_get_status(int *status)
 {
 	int control_status;
 
-	*status=0;
+	*status = 0;
 	control_status = inb_p(pcipcwd_private.io_addr + 1);
 	if (control_status & WD_PCI_WTRP)
 		*status |= WDIOF_CARDRESET;
@@ -369,8 +367,8 @@ static int pcipcwd_clear_status(void)
 	outb_p((control_status & WD_PCI_R2DS) | WD_PCI_WTRP, pcipcwd_private.io_addr + 1);
 
 	/* clear reset counter */
-	msb=0;
-	reset_counter=0xff;
+	msb = 0;
+	reset_counter = 0xff;
 	send_command(CMD_GET_CLEAR_RESET_COUNT, &msb, &reset_counter);
 
 	if (debug >= DEBUG) {
@@ -442,7 +440,7 @@ static ssize_t pcipcwd_write(struct file *file, const char __user *data,
 			/* scan to see whether or not we got the magic character */
 			for (i = 0; i != len; i++) {
 				char c;
-				if(get_user(c, data+i))
+				if (get_user(c, data + i))
 					return -EFAULT;
 				if (c == 'V')
 					expect_release = 42;
@@ -455,8 +453,8 @@ static ssize_t pcipcwd_write(struct file *file, const char __user *data,
 	return len;
 }
 
-static int pcipcwd_ioctl(struct inode *inode, struct file *file,
-			  unsigned int cmd, unsigned long arg)
+static long pcipcwd_ioctl(struct file *file, unsigned int cmd,
+						unsigned long arg)
 {
 	void __user *argp = (void __user *)arg;
 	int __user *p = argp;
@@ -471,92 +469,89 @@ static int pcipcwd_ioctl(struct inode *inode, struct file *file,
 	};
 
 	switch (cmd) {
-		case WDIOC_GETSUPPORT:
-			return copy_to_user(argp, &ident,
-				sizeof (ident)) ? -EFAULT : 0;
+	case WDIOC_GETSUPPORT:
+		return copy_to_user(argp, &ident, sizeof(ident)) ? -EFAULT : 0;
+
+	case WDIOC_GETSTATUS:
+	{
+		int status;
+		pcipcwd_get_status(&status);
+		return put_user(status, p);
+	}
 
-		case WDIOC_GETSTATUS:
-		{
-			int status;
+	case WDIOC_GETBOOTSTATUS:
+		return put_user(pcipcwd_private.boot_status, p);
 
-			pcipcwd_get_status(&status);
+	case WDIOC_GETTEMP:
+	{
+		int temperature;
 
-			return put_user(status, p);
-		}
+		if (pcipcwd_get_temperature(&temperature))
+			return -EFAULT;
 
-		case WDIOC_GETBOOTSTATUS:
-			return put_user(pcipcwd_private.boot_status, p);
+		return put_user(temperature, p);
+	}
 
-		case WDIOC_GETTEMP:
-		{
-			int temperature;
+	case WDIOC_SETOPTIONS:
+	{
+		int new_options, retval = -EINVAL;
 
-			if (pcipcwd_get_temperature(&temperature))
-				return -EFAULT;
+		if (get_user(new_options, p))
+			return -EFAULT;
 
-			return put_user(temperature, p);
+		if (new_options & WDIOS_DISABLECARD) {
+			if (pcipcwd_stop())
+				return -EIO;
+			retval = 0;
 		}
 
-		case WDIOC_KEEPALIVE:
-			pcipcwd_keepalive();
-			return 0;
-
-		case WDIOC_SETOPTIONS:
-		{
-			int new_options, retval = -EINVAL;
-
-			if (get_user (new_options, p))
-				return -EFAULT;
-
-			if (new_options & WDIOS_DISABLECARD) {
-				if (pcipcwd_stop())
-					return -EIO;
-				retval = 0;
-			}
+		if (new_options & WDIOS_ENABLECARD) {
+			if (pcipcwd_start())
+				return -EIO;
+			retval = 0;
+		}
 
-			if (new_options & WDIOS_ENABLECARD) {
-				if (pcipcwd_start())
-					return -EIO;
-				retval = 0;
-			}
+		if (new_options & WDIOS_TEMPPANIC) {
+			temp_panic = 1;
+			retval = 0;
+		}
 
-			if (new_options & WDIOS_TEMPPANIC) {
-				temp_panic = 1;
-				retval = 0;
-			}
+		return retval;
+	}
 
-			return retval;
-		}
+	case WDIOC_KEEPALIVE:
+		pcipcwd_keepalive();
+		return 0;
 
-		case WDIOC_SETTIMEOUT:
-		{
-			int new_heartbeat;
+	case WDIOC_SETTIMEOUT:
+	{
+		int new_heartbeat;
 
-			if (get_user(new_heartbeat, p))
-				return -EFAULT;
+		if (get_user(new_heartbeat, p))
+			return -EFAULT;
 
-			if (pcipcwd_set_heartbeat(new_heartbeat))
-			    return -EINVAL;
+		if (pcipcwd_set_heartbeat(new_heartbeat))
+		    return -EINVAL;
 
-			pcipcwd_keepalive();
-			/* Fall */
-		}
+		pcipcwd_keepalive();
+		/* Fall */
+	}
 
-		case WDIOC_GETTIMEOUT:
-			return put_user(heartbeat, p);
+	case WDIOC_GETTIMEOUT:
+		return put_user(heartbeat, p);
 
-		case WDIOC_GETTIMELEFT:
-		{
-			int time_left;
+	case WDIOC_GETTIMELEFT:
+	{
+		int time_left;
 
-			if (pcipcwd_get_timeleft(&time_left))
-				return -EFAULT;
+		if (pcipcwd_get_timeleft(&time_left))
+			return -EFAULT;
 
-			return put_user(time_left, p);
-		}
+		return put_user(time_left, p);
+	}
 
-		default:
-			return -ENOTTY;
+	default:
+		return -ENOTTY;
 	}
 }
 
@@ -603,7 +598,7 @@ static ssize_t pcipcwd_temp_read(struct file *file, char __user *data,
 	if (pcipcwd_get_temperature(&temperature))
 		return -EFAULT;
 
-	if (copy_to_user (data, &temperature, 1))
+	if (copy_to_user(data, &temperature, 1))
 		return -EFAULT;
 
 	return 1;
@@ -628,10 +623,8 @@ static int pcipcwd_temp_release(struct inode *inode, struct file *file)
 
 static int pcipcwd_notify_sys(struct notifier_block *this, unsigned long code, void *unused)
 {
-	if (code==SYS_DOWN || code==SYS_HALT) {
-		/* Turn the WDT off */
-		pcipcwd_stop();
-	}
+	if (code == SYS_DOWN || code == SYS_HALT)
+		pcipcwd_stop();	/* Turn the WDT off */
 
 	return NOTIFY_DONE;
 }
@@ -644,7 +637,7 @@ static const struct file_operations pcipcwd_fops = {
 	.owner =	THIS_MODULE,
 	.llseek =	no_llseek,
 	.write =	pcipcwd_write,
-	.ioctl =	pcipcwd_ioctl,
+	.unlocked_ioctl = pcipcwd_ioctl,
 	.open =		pcipcwd_open,
 	.release =	pcipcwd_release,
 };
diff --git a/drivers/watchdog/pcwd_usb.c b/drivers/watchdog/pcwd_usb.c
index bf443d077a1e..c1685c942de6 100644
--- a/drivers/watchdog/pcwd_usb.c
+++ b/drivers/watchdog/pcwd_usb.c
@@ -40,8 +40,7 @@
 #include <linux/slab.h>		/* For kmalloc, ... */
 #include <linux/mutex.h>	/* For mutex locking */
 #include <linux/hid.h>		/* For HID_REQ_SET_REPORT & HID_DT_REPORT */
-
-#include <asm/uaccess.h>	/* For copy_to_user/put_user/... */
+#include <linux/uaccess.h>	/* For copy_to_user/put_user/... */
 
 
 #ifdef CONFIG_USB_DEBUG
@@ -88,7 +87,7 @@ MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=" _
 #define USB_PCWD_PRODUCT_ID	0x1140
 
 /* table of devices that work with this driver */
-static struct usb_device_id usb_pcwd_table [] = {
+static struct usb_device_id usb_pcwd_table[] = {
 	{ USB_DEVICE(USB_PCWD_VENDOR_ID, USB_PCWD_PRODUCT_ID) },
 	{ }					/* Terminating entry */
 };
@@ -110,7 +109,7 @@ MODULE_DEVICE_TABLE (usb, usb_pcwd_table);
 #define CMD_DISABLE_WATCHDOG		CMD_ENABLE_WATCHDOG
 
 /* Watchdog's Dip Switch heartbeat values */
-static const int heartbeat_tbl [] = {
+static const int heartbeat_tbl[] = {
 	5,	/* OFF-OFF-OFF	=  5 Sec  */
 	10,	/* OFF-OFF-ON	= 10 Sec  */
 	30,	/* OFF-ON-OFF	= 30 Sec  */
@@ -130,15 +129,15 @@ static char expect_release;
 
 /* Structure to hold all of our device specific stuff */
 struct usb_pcwd_private {
-	struct usb_device *	udev;			/* save off the usb device pointer */
-	struct usb_interface *	interface;		/* the interface for this device */
+	struct usb_device	*udev;			/* save off the usb device pointer */
+	struct usb_interface	*interface;		/* the interface for this device */
 
 	unsigned int		interface_number;	/* the interface number used for cmd's */
 
-	unsigned char *		intr_buffer;		/* the buffer to intr data */
+	unsigned char		*intr_buffer;		/* the buffer to intr data */
 	dma_addr_t		intr_dma;		/* the dma address for the intr buffer */
 	size_t			intr_size;		/* the size of the intr buffer */
-	struct urb *		intr_urb;		/* the urb used for the intr pipe */
+	struct urb		*intr_urb;		/* the urb used for the intr pipe */
 
 	unsigned char		cmd_command;		/* The command that is reported back */
 	unsigned char		cmd_data_msb;		/* The data MSB that is reported back */
@@ -154,8 +153,8 @@ static struct usb_pcwd_private *usb_pcwd_device;
 static DEFINE_MUTEX(disconnect_mutex);
 
 /* local function prototypes */
-static int usb_pcwd_probe	(struct usb_interface *interface, const struct usb_device_id *id);
-static void usb_pcwd_disconnect	(struct usb_interface *interface);
+static int usb_pcwd_probe(struct usb_interface *interface, const struct usb_device_id *id);
+static void usb_pcwd_disconnect(struct usb_interface *interface);
 
 /* usb specific object needed to register this driver with the usb subsystem */
 static struct usb_driver usb_pcwd_driver = {
@@ -195,10 +194,10 @@ static void usb_pcwd_intr_done(struct urb *urb)
 	usb_pcwd->cmd_data_lsb = data[2];
 
 	/* notify anyone waiting that the cmd has finished */
-	atomic_set (&usb_pcwd->cmd_received, 1);
+	atomic_set(&usb_pcwd->cmd_received, 1);
 
 resubmit:
-	retval = usb_submit_urb (urb, GFP_ATOMIC);
+	retval = usb_submit_urb(urb, GFP_ATOMIC);
 	if (retval)
 		printk(KERN_ERR PFX "can't resubmit intr, usb_submit_urb failed with result %d\n",
 			retval);
@@ -224,7 +223,7 @@ static int usb_pcwd_send_command(struct usb_pcwd_private *usb_pcwd, unsigned cha
 	dbg("sending following data cmd=0x%02x msb=0x%02x lsb=0x%02x",
 		buf[0], buf[1], buf[2]);
 
-	atomic_set (&usb_pcwd->cmd_received, 0);
+	atomic_set(&usb_pcwd->cmd_received, 0);
 
 	if (usb_control_msg(usb_pcwd->udev, usb_sndctrlpipe(usb_pcwd->udev, 0),
 			HID_REQ_SET_REPORT, HID_DT_REPORT,
@@ -237,7 +236,7 @@ static int usb_pcwd_send_command(struct usb_pcwd_private *usb_pcwd, unsigned cha
 	got_response = 0;
 	for (count = 0; (count < USB_COMMAND_TIMEOUT) && (!got_response); count++) {
 		mdelay(1);
-		if (atomic_read (&usb_pcwd->cmd_received))
+		if (atomic_read(&usb_pcwd->cmd_received))
 			got_response = 1;
 	}
 
@@ -356,7 +355,7 @@ static ssize_t usb_pcwd_write(struct file *file, const char __user *data,
 			/* scan to see whether or not we got the magic character */
 			for (i = 0; i != len; i++) {
 				char c;
-				if(get_user(c, data+i))
+				if (get_user(c, data + i))
 					return -EFAULT;
 				if (c == 'V')
 					expect_release = 42;
@@ -369,8 +368,8 @@ static ssize_t usb_pcwd_write(struct file *file, const char __user *data,
 	return len;
 }
 
-static int usb_pcwd_ioctl(struct inode *inode, struct file *file,
-			  unsigned int cmd, unsigned long arg)
+static long usb_pcwd_ioctl(struct file *file, unsigned int cmd,
+						unsigned long arg)
 {
 	void __user *argp = (void __user *)arg;
 	int __user *p = argp;
@@ -383,77 +382,76 @@ static int usb_pcwd_ioctl(struct inode *inode, struct file *file,
 	};
 
 	switch (cmd) {
-		case WDIOC_GETSUPPORT:
-			return copy_to_user(argp, &ident,
-				sizeof (ident)) ? -EFAULT : 0;
+	case WDIOC_GETSUPPORT:
+		return copy_to_user(argp, &ident, sizeof(ident)) ? -EFAULT : 0;
 
-		case WDIOC_GETSTATUS:
-		case WDIOC_GETBOOTSTATUS:
-			return put_user(0, p);
+	case WDIOC_GETSTATUS:
+	case WDIOC_GETBOOTSTATUS:
+		return put_user(0, p);
 
-		case WDIOC_GETTEMP:
-		{
-			int temperature;
+	case WDIOC_GETTEMP:
+	{
+		int temperature;
 
-			if (usb_pcwd_get_temperature(usb_pcwd_device, &temperature))
-				return -EFAULT;
+		if (usb_pcwd_get_temperature(usb_pcwd_device, &temperature))
+			return -EFAULT;
 
-			return put_user(temperature, p);
-		}
+		return put_user(temperature, p);
+	}
 
-		case WDIOC_KEEPALIVE:
-			usb_pcwd_keepalive(usb_pcwd_device);
-			return 0;
+	case WDIOC_SETOPTIONS:
+	{
+		int new_options, retval = -EINVAL;
 
-		case WDIOC_SETOPTIONS:
-		{
-			int new_options, retval = -EINVAL;
+		if (get_user(new_options, p))
+			return -EFAULT;
 
-			if (get_user (new_options, p))
-				return -EFAULT;
+		if (new_options & WDIOS_DISABLECARD) {
+			usb_pcwd_stop(usb_pcwd_device);
+			retval = 0;
+		}
 
-			if (new_options & WDIOS_DISABLECARD) {
-				usb_pcwd_stop(usb_pcwd_device);
-				retval = 0;
-			}
+		if (new_options & WDIOS_ENABLECARD) {
+			usb_pcwd_start(usb_pcwd_device);
+			retval = 0;
+		}
 
-			if (new_options & WDIOS_ENABLECARD) {
-				usb_pcwd_start(usb_pcwd_device);
-				retval = 0;
-			}
+		return retval;
+	}
 
-			return retval;
-		}
+	case WDIOC_KEEPALIVE:
+		usb_pcwd_keepalive(usb_pcwd_device);
+		return 0;
 
-		case WDIOC_SETTIMEOUT:
-		{
-			int new_heartbeat;
+	case WDIOC_SETTIMEOUT:
+	{
+		int new_heartbeat;
 
-			if (get_user(new_heartbeat, p))
-				return -EFAULT;
+		if (get_user(new_heartbeat, p))
+			return -EFAULT;
 
-			if (usb_pcwd_set_heartbeat(usb_pcwd_device, new_heartbeat))
-			    return -EINVAL;
+		if (usb_pcwd_set_heartbeat(usb_pcwd_device, new_heartbeat))
+		    return -EINVAL;
 
-			usb_pcwd_keepalive(usb_pcwd_device);
-			/* Fall */
-		}
+		usb_pcwd_keepalive(usb_pcwd_device);
+		/* Fall */
+	}
 
-		case WDIOC_GETTIMEOUT:
-			return put_user(heartbeat, p);
+	case WDIOC_GETTIMEOUT:
+		return put_user(heartbeat, p);
 
-		case WDIOC_GETTIMELEFT:
-		{
-			int time_left;
+	case WDIOC_GETTIMELEFT:
+	{
+		int time_left;
 
-			if (usb_pcwd_get_timeleft(usb_pcwd_device, &time_left))
-				return -EFAULT;
+		if (usb_pcwd_get_timeleft(usb_pcwd_device, &time_left))
+			return -EFAULT;
 
-			return put_user(time_left, p);
-		}
+		return put_user(time_left, p);
+	}
 
-		default:
-			return -ENOTTY;
+	default:
+		return -ENOTTY;
 	}
 }
 
@@ -519,10 +517,8 @@ static int usb_pcwd_temperature_release(struct inode *inode, struct file *file)
 
 static int usb_pcwd_notify_sys(struct notifier_block *this, unsigned long code, void *unused)
 {
-	if (code==SYS_DOWN || code==SYS_HALT) {
-		/* Turn the WDT off */
-		usb_pcwd_stop(usb_pcwd_device);
-	}
+	if (code == SYS_DOWN || code == SYS_HALT)
+		usb_pcwd_stop(usb_pcwd_device);	/* Turn the WDT off */
 
 	return NOTIFY_DONE;
 }
@@ -535,7 +531,7 @@ static const struct file_operations usb_pcwd_fops = {
 	.owner =	THIS_MODULE,
 	.llseek =	no_llseek,
 	.write =	usb_pcwd_write,
-	.ioctl =	usb_pcwd_ioctl,
+	.unlocked_ioctl = usb_pcwd_ioctl,
 	.open =		usb_pcwd_open,
 	.release =	usb_pcwd_release,
 };
@@ -567,13 +563,13 @@ static struct notifier_block usb_pcwd_notifier = {
 /**
  *	usb_pcwd_delete
  */
-static inline void usb_pcwd_delete (struct usb_pcwd_private *usb_pcwd)
+static inline void usb_pcwd_delete(struct usb_pcwd_private *usb_pcwd)
 {
 	usb_free_urb(usb_pcwd->intr_urb);
 	if (usb_pcwd->intr_buffer != NULL)
 		usb_buffer_free(usb_pcwd->udev, usb_pcwd->intr_size,
 				usb_pcwd->intr_buffer, usb_pcwd->intr_dma);
-	kfree (usb_pcwd);
+	kfree(usb_pcwd);
 }
 
 /**
@@ -626,7 +622,7 @@ static int usb_pcwd_probe(struct usb_interface *interface, const struct usb_devi
 	maxp = usb_maxpacket(udev, pipe, usb_pipeout(pipe));
 
 	/* allocate memory for our device and initialize it */
-	usb_pcwd = kzalloc (sizeof(struct usb_pcwd_private), GFP_KERNEL);
+	usb_pcwd = kzalloc(sizeof(struct usb_pcwd_private), GFP_KERNEL);
 	if (usb_pcwd == NULL) {
 		printk(KERN_ERR PFX "Out of memory\n");
 		goto error;
@@ -641,7 +637,8 @@ static int usb_pcwd_probe(struct usb_interface *interface, const struct usb_devi
 	usb_pcwd->intr_size = (le16_to_cpu(endpoint->wMaxPacketSize) > 8 ? le16_to_cpu(endpoint->wMaxPacketSize) : 8);
 
 	/* set up the memory buffer's */
-	if (!(usb_pcwd->intr_buffer = usb_buffer_alloc(udev, usb_pcwd->intr_size, GFP_ATOMIC, &usb_pcwd->intr_dma))) {
+	usb_pcwd->intr_buffer = usb_buffer_alloc(udev, usb_pcwd->intr_size, GFP_ATOMIC, &usb_pcwd->intr_dma);
+	if (!usb_pcwd->intr_buffer) {
 		printk(KERN_ERR PFX "Out of memory\n");
 		goto error;
 	}
@@ -675,11 +672,10 @@ static int usb_pcwd_probe(struct usb_interface *interface, const struct usb_devi
 
 	/* Get the Firmware Version */
 	got_fw_rev = usb_pcwd_send_command(usb_pcwd, CMD_GET_FIRMWARE_VERSION, &fw_rev_major, &fw_rev_minor);
-	if (got_fw_rev) {
+	if (got_fw_rev)
 		sprintf(fw_ver_str, "%u.%02u", fw_rev_major, fw_rev_minor);
-	} else {
+	else
 		sprintf(fw_ver_str, "<card no answer>");
-	}
 
 	printk(KERN_INFO PFX "Found card (Firmware: %s) with temp option\n",
 		fw_ver_str);
@@ -725,7 +721,7 @@ static int usb_pcwd_probe(struct usb_interface *interface, const struct usb_devi
 	}
 
 	/* we can register the device now, as it is ready */
-	usb_set_intfdata (interface, usb_pcwd);
+	usb_set_intfdata(interface, usb_pcwd);
 
 	printk(KERN_INFO PFX "initialized. heartbeat=%d sec (nowayout=%d)\n",
 		heartbeat, nowayout);
@@ -759,8 +755,8 @@ static void usb_pcwd_disconnect(struct usb_interface *interface)
 	/* prevent races with open() */
 	mutex_lock(&disconnect_mutex);
 
-	usb_pcwd = usb_get_intfdata (interface);
-	usb_set_intfdata (interface, NULL);
+	usb_pcwd = usb_get_intfdata(interface);
+	usb_set_intfdata(interface, NULL);
 
 	mutex_lock(&usb_pcwd->mtx);
 
@@ -820,5 +816,5 @@ static void __exit usb_pcwd_exit(void)
 }
 
 
-module_init (usb_pcwd_init);
-module_exit (usb_pcwd_exit);
+module_init(usb_pcwd_init);
+module_exit(usb_pcwd_exit);
diff --git a/drivers/watchdog/pnx4008_wdt.c b/drivers/watchdog/pnx4008_wdt.c
index 6b8483d3c783..0ed84162437b 100644
--- a/drivers/watchdog/pnx4008_wdt.c
+++ b/drivers/watchdog/pnx4008_wdt.c
@@ -28,10 +28,9 @@
 #include <linux/platform_device.h>
 #include <linux/clk.h>
 #include <linux/spinlock.h>
-
-#include <asm/hardware.h>
-#include <asm/uaccess.h>
-#include <asm/io.h>
+#include <linux/uaccess.h>
+#include <linux/io.h>
+#include <mach/hardware.h>
 
 #define MODULE_NAME "PNX4008-WDT: "
 
@@ -144,9 +143,8 @@ static int pnx4008_wdt_open(struct inode *inode, struct file *file)
 	return nonseekable_open(inode, file);
 }
 
-static ssize_t
-pnx4008_wdt_write(struct file *file, const char *data, size_t len,
-		  loff_t * ppos)
+static ssize_t pnx4008_wdt_write(struct file *file, const char *data,
+					size_t len, loff_t *ppos)
 {
 	if (len) {
 		if (!nowayout) {
@@ -169,15 +167,14 @@ pnx4008_wdt_write(struct file *file, const char *data, size_t len,
 	return len;
 }
 
-static struct watchdog_info ident = {
+static const struct watchdog_info ident = {
 	.options = WDIOF_CARDRESET | WDIOF_MAGICCLOSE |
 	    WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING,
 	.identity = "PNX4008 Watchdog",
 };
 
-static int
-pnx4008_wdt_ioctl(struct inode *inode, struct file *file, unsigned int cmd,
-		  unsigned long arg)
+static long pnx4008_wdt_ioctl(struct inode *inode, struct file *file,
+					unsigned int cmd, unsigned long arg)
 {
 	int ret = -ENOTTY;
 	int time;
@@ -196,6 +193,11 @@ pnx4008_wdt_ioctl(struct inode *inode, struct file *file, unsigned int cmd,
 		ret = put_user(boot_status, (int *)arg);
 		break;
 
+	case WDIOC_KEEPALIVE:
+		wdt_enable();
+		ret = 0;
+		break;
+
 	case WDIOC_SETTIMEOUT:
 		ret = get_user(time, (int *)arg);
 		if (ret)
@@ -213,11 +215,6 @@ pnx4008_wdt_ioctl(struct inode *inode, struct file *file, unsigned int cmd,
 	case WDIOC_GETTIMEOUT:
 		ret = put_user(heartbeat, (int *)arg);
 		break;
-
-	case WDIOC_KEEPALIVE:
-		wdt_enable();
-		ret = 0;
-		break;
 	}
 	return ret;
 }
@@ -238,7 +235,7 @@ static const struct file_operations pnx4008_wdt_fops = {
 	.owner = THIS_MODULE,
 	.llseek = no_llseek,
 	.write = pnx4008_wdt_write,
-	.ioctl = pnx4008_wdt_ioctl,
+	.unlocked_ioctl = pnx4008_wdt_ioctl,
 	.open = pnx4008_wdt_open,
 	.release = pnx4008_wdt_release,
 };
diff --git a/drivers/watchdog/rc32434_wdt.c b/drivers/watchdog/rc32434_wdt.c
new file mode 100644
index 000000000000..6756bcb009ed
--- /dev/null
+++ b/drivers/watchdog/rc32434_wdt.c
@@ -0,0 +1,344 @@
+/*
+ *  IDT Interprise 79RC32434 watchdog driver
+ *
+ *  Copyright (C) 2006, Ondrej Zajicek <santiago@crfreenet.org>
+ *  Copyright (C) 2008, Florian Fainelli <florian@openwrt.org>
+ *
+ *  based on
+ *  SoftDog 0.05:	A Software Watchdog Device
+ *
+ *  (c) Copyright 1996 Alan Cox <alan@redhat.com>, All Rights Reserved.
+ *
+ *  This program is free software; you can redistribute it and/or
+ *  modify it under the terms of the GNU General Public License
+ *  as published by the Free Software Foundation; either version
+ *  2 of the License, or (at your option) any later version.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/fs.h>
+#include <linux/mm.h>
+#include <linux/miscdevice.h>
+#include <linux/watchdog.h>
+#include <linux/reboot.h>
+#include <linux/smp_lock.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/uaccess.h>
+
+#include <asm/bootinfo.h>
+#include <asm/time.h>
+#include <asm/mach-rc32434/integ.h>
+
+#define MAX_TIMEOUT			20
+#define RC32434_WDT_INTERVAL		(15 * HZ)
+
+#define VERSION "0.2"
+
+static struct {
+	struct completion stop;
+	int running;
+	struct timer_list timer;
+	int queue;
+	int default_ticks;
+	unsigned long inuse;
+} rc32434_wdt_device;
+
+static struct integ __iomem *wdt_reg;
+static int ticks = 100 * HZ;
+
+static int expect_close;
+static int timeout;
+
+static int nowayout = WATCHDOG_NOWAYOUT;
+module_param(nowayout, int, 0);
+MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default="
+	__MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
+
+
+static void rc32434_wdt_start(void)
+{
+	u32 val;
+
+	if (!rc32434_wdt_device.inuse) {
+		writel(0, &wdt_reg->wtcount);
+
+		val = RC32434_ERR_WRE;
+		writel(readl(&wdt_reg->errcs) | val, &wdt_reg->errcs);
+
+		val = RC32434_WTC_EN;
+		writel(readl(&wdt_reg->wtc) | val, &wdt_reg->wtc);
+	}
+	rc32434_wdt_device.running++;
+}
+
+static void rc32434_wdt_stop(void)
+{
+	u32 val;
+
+	if (rc32434_wdt_device.running) {
+
+		val = ~RC32434_WTC_EN;
+		writel(readl(&wdt_reg->wtc) & val, &wdt_reg->wtc);
+
+		val = ~RC32434_ERR_WRE;
+		writel(readl(&wdt_reg->errcs) & val, &wdt_reg->errcs);
+
+		rc32434_wdt_device.running = 0;
+	}
+}
+
+static void rc32434_wdt_set(int new_timeout)
+{
+	u32 cmp = new_timeout * HZ;
+	u32 state, val;
+
+	timeout = new_timeout;
+	/*
+	 * store and disable WTC
+	 */
+	state = (u32)(readl(&wdt_reg->wtc) & RC32434_WTC_EN);
+	val = ~RC32434_WTC_EN;
+	writel(readl(&wdt_reg->wtc) & val, &wdt_reg->wtc);
+
+	writel(0, &wdt_reg->wtcount);
+	writel(cmp, &wdt_reg->wtcompare);
+
+	/*
+	 * restore WTC
+	 */
+
+	writel(readl(&wdt_reg->wtc) | state, &wdt_reg);
+}
+
+static void rc32434_wdt_reset(void)
+{
+	ticks = rc32434_wdt_device.default_ticks;
+}
+
+static void rc32434_wdt_update(unsigned long unused)
+{
+	if (rc32434_wdt_device.running)
+		ticks--;
+
+	writel(0, &wdt_reg->wtcount);
+
+	if (rc32434_wdt_device.queue && ticks)
+		mod_timer(&rc32434_wdt_device.timer,
+			jiffies + RC32434_WDT_INTERVAL);
+	else
+		complete(&rc32434_wdt_device.stop);
+}
+
+static int rc32434_wdt_open(struct inode *inode, struct file *file)
+{
+	if (test_and_set_bit(0, &rc32434_wdt_device.inuse))
+		return -EBUSY;
+
+	if (nowayout)
+		__module_get(THIS_MODULE);
+
+	return nonseekable_open(inode, file);
+}
+
+static int rc32434_wdt_release(struct inode *inode, struct file *file)
+{
+	if (expect_close && nowayout == 0) {
+		rc32434_wdt_stop();
+		printk(KERN_INFO KBUILD_MODNAME ": disabling watchdog timer\n");
+		module_put(THIS_MODULE);
+	} else
+		printk(KERN_CRIT KBUILD_MODNAME
+			": device closed unexpectedly. WDT will not stop !\n");
+
+	clear_bit(0, &rc32434_wdt_device.inuse);
+	return 0;
+}
+
+static ssize_t rc32434_wdt_write(struct file *file, const char *data,
+				size_t len, loff_t *ppos)
+{
+	if (len) {
+		if (!nowayout) {
+			size_t i;
+
+			/* In case it was set long ago */
+			expect_close = 0;
+
+			for (i = 0; i != len; i++) {
+				char c;
+				if (get_user(c, data + i))
+					return -EFAULT;
+				if (c == 'V')
+					expect_close = 1;
+			}
+		}
+		rc32434_wdt_update(0);
+		return len;
+	}
+	return 0;
+}
+
+static int rc32434_wdt_ioctl(struct inode *inode, struct file *file,
+	unsigned int cmd, unsigned long arg)
+{
+	void __user *argp = (void __user *)arg;
+	int new_timeout;
+	unsigned int value;
+	static struct watchdog_info ident = {
+		.options =		WDIOF_SETTIMEOUT |
+					WDIOF_KEEPALIVEPING |
+					WDIOF_MAGICCLOSE,
+		.identity =		"RC32434_WDT Watchdog",
+	};
+	switch (cmd) {
+	case WDIOC_KEEPALIVE:
+		rc32434_wdt_reset();
+		break;
+	case WDIOC_GETSTATUS:
+	case WDIOC_GETBOOTSTATUS:
+		value = readl(&wdt_reg->wtcount);
+		if (copy_to_user(argp, &value, sizeof(int)))
+			return -EFAULT;
+		break;
+	case WDIOC_GETSUPPORT:
+		if (copy_to_user(argp, &ident, sizeof(ident)))
+			return -EFAULT;
+		break;
+	case WDIOC_SETOPTIONS:
+		if (copy_from_user(&value, argp, sizeof(int)))
+			return -EFAULT;
+		switch (value) {
+		case WDIOS_ENABLECARD:
+			rc32434_wdt_start();
+			break;
+		case WDIOS_DISABLECARD:
+			rc32434_wdt_stop();
+		default:
+			return -EINVAL;
+		}
+		break;
+	case WDIOC_SETTIMEOUT:
+		if (copy_from_user(&new_timeout, argp, sizeof(int)))
+			return -EFAULT;
+		if (new_timeout < 1)
+			return -EINVAL;
+		if (new_timeout > MAX_TIMEOUT)
+			return -EINVAL;
+		rc32434_wdt_set(new_timeout);
+	case WDIOC_GETTIMEOUT:
+		return copy_to_user(argp, &timeout, sizeof(int));
+	default:
+		return -ENOTTY;
+	}
+
+	return 0;
+}
+
+static struct file_operations rc32434_wdt_fops = {
+	.owner		= THIS_MODULE,
+	.llseek		= no_llseek,
+	.write		= rc32434_wdt_write,
+	.ioctl		= rc32434_wdt_ioctl,
+	.open		= rc32434_wdt_open,
+	.release	= rc32434_wdt_release,
+};
+
+static struct miscdevice rc32434_wdt_miscdev = {
+	.minor	= WATCHDOG_MINOR,
+	.name	= "watchdog",
+	.fops	= &rc32434_wdt_fops,
+};
+
+static char banner[] = KERN_INFO KBUILD_MODNAME
+		": Watchdog Timer version " VERSION ", timer margin: %d sec\n";
+
+static int rc32434_wdt_probe(struct platform_device *pdev)
+{
+	int ret;
+	struct resource *r;
+
+	r = platform_get_resource_byname(pdev, IORESOURCE_MEM, "rb500_wdt_res");
+	if (!r) {
+		printk(KERN_ERR KBUILD_MODNAME
+			"failed to retrieve resources\n");
+		return -ENODEV;
+	}
+
+	wdt_reg = ioremap_nocache(r->start, r->end - r->start);
+	if (!wdt_reg) {
+		printk(KERN_ERR KBUILD_MODNAME
+			"failed to remap I/O resources\n");
+		return -ENXIO;
+	}
+
+	ret = misc_register(&rc32434_wdt_miscdev);
+
+	if (ret < 0) {
+		printk(KERN_ERR KBUILD_MODNAME
+			"failed to register watchdog device\n");
+		goto unmap;
+	}
+
+	init_completion(&rc32434_wdt_device.stop);
+	rc32434_wdt_device.queue = 0;
+
+	clear_bit(0, &rc32434_wdt_device.inuse);
+
+	setup_timer(&rc32434_wdt_device.timer, rc32434_wdt_update, 0L);
+
+	rc32434_wdt_device.default_ticks = ticks;
+
+	rc32434_wdt_start();
+
+	printk(banner, timeout);
+
+	return 0;
+
+unmap:
+	iounmap(wdt_reg);
+	return ret;
+}
+
+static int rc32434_wdt_remove(struct platform_device *pdev)
+{
+	if (rc32434_wdt_device.queue) {
+		rc32434_wdt_device.queue = 0;
+		wait_for_completion(&rc32434_wdt_device.stop);
+	}
+	misc_deregister(&rc32434_wdt_miscdev);
+
+	iounmap(wdt_reg);
+
+	return 0;
+}
+
+static struct platform_driver rc32434_wdt = {
+	.probe	= rc32434_wdt_probe,
+	.remove = rc32434_wdt_remove,
+	.driver = {
+		.name = "rc32434_wdt",
+	}
+};
+
+static int __init rc32434_wdt_init(void)
+{
+	return platform_driver_register(&rc32434_wdt);
+}
+
+static void __exit rc32434_wdt_exit(void)
+{
+	platform_driver_unregister(&rc32434_wdt);
+}
+
+module_init(rc32434_wdt_init);
+module_exit(rc32434_wdt_exit);
+
+MODULE_AUTHOR("Ondrej Zajicek <santiago@crfreenet.org>,"
+		"Florian Fainelli <florian@openwrt.org>");
+MODULE_DESCRIPTION("Driver for the IDT RC32434 SoC watchdog");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR);
diff --git a/drivers/watchdog/rdc321x_wdt.c b/drivers/watchdog/rdc321x_wdt.c
new file mode 100644
index 000000000000..9108efa73e7d
--- /dev/null
+++ b/drivers/watchdog/rdc321x_wdt.c
@@ -0,0 +1,285 @@
+/*
+ * RDC321x watchdog driver
+ *
+ * Copyright (C) 2007 Florian Fainelli <florian@openwrt.org>
+ *
+ * This driver is highly inspired from the cpu5_wdt driver
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/types.h>
+#include <linux/errno.h>
+#include <linux/miscdevice.h>
+#include <linux/fs.h>
+#include <linux/init.h>
+#include <linux/ioport.h>
+#include <linux/timer.h>
+#include <linux/completion.h>
+#include <linux/jiffies.h>
+#include <linux/platform_device.h>
+#include <linux/watchdog.h>
+#include <linux/io.h>
+#include <linux/uaccess.h>
+
+#include <asm/mach-rdc321x/rdc321x_defs.h>
+
+#define RDC_WDT_MASK	0x80000000 /* Mask */
+#define RDC_WDT_EN	0x00800000 /* Enable bit */
+#define RDC_WDT_WTI	0x00200000 /* Generate CPU reset/NMI/WDT on timeout */
+#define RDC_WDT_RST	0x00100000 /* Reset bit */
+#define RDC_WDT_WIF	0x00040000 /* WDT IRQ Flag */
+#define RDC_WDT_IRT	0x00000100 /* IRQ Routing table */
+#define RDC_WDT_CNT	0x00000001 /* WDT count */
+
+#define RDC_CLS_TMR	0x80003844 /* Clear timer */
+
+#define RDC_WDT_INTERVAL	(HZ/10+1)
+
+static int ticks = 1000;
+
+/* some device data */
+
+static struct {
+	struct completion stop;
+	int running;
+	struct timer_list timer;
+	int queue;
+	int default_ticks;
+	unsigned long inuse;
+	spinlock_t lock;
+} rdc321x_wdt_device;
+
+/* generic helper functions */
+
+static void rdc321x_wdt_trigger(unsigned long unused)
+{
+	unsigned long flags;
+
+	if (rdc321x_wdt_device.running)
+		ticks--;
+
+	/* keep watchdog alive */
+	spin_lock_irqsave(&rdc321x_wdt_device.lock, flags);
+	outl(RDC_WDT_EN | inl(RDC3210_CFGREG_DATA),
+		RDC3210_CFGREG_DATA);
+	spin_unlock_irqrestore(&rdc321x_wdt_device.lock, flags);
+
+	/* requeue?? */
+	if (rdc321x_wdt_device.queue && ticks)
+		mod_timer(&rdc321x_wdt_device.timer,
+				jiffies + RDC_WDT_INTERVAL);
+	else {
+		/* ticks doesn't matter anyway */
+		complete(&rdc321x_wdt_device.stop);
+	}
+
+}
+
+static void rdc321x_wdt_reset(void)
+{
+	ticks = rdc321x_wdt_device.default_ticks;
+}
+
+static void rdc321x_wdt_start(void)
+{
+	unsigned long flags;
+
+	if (!rdc321x_wdt_device.queue) {
+		rdc321x_wdt_device.queue = 1;
+
+		/* Clear the timer */
+		spin_lock_irqsave(&rdc321x_wdt_device.lock, flags);
+		outl(RDC_CLS_TMR, RDC3210_CFGREG_ADDR);
+
+		/* Enable watchdog and set the timeout to 81.92 us */
+		outl(RDC_WDT_EN | RDC_WDT_CNT, RDC3210_CFGREG_DATA);
+		spin_unlock_irqrestore(&rdc321x_wdt_device.lock, flags);
+
+		mod_timer(&rdc321x_wdt_device.timer,
+				jiffies + RDC_WDT_INTERVAL);
+	}
+
+	/* if process dies, counter is not decremented */
+	rdc321x_wdt_device.running++;
+}
+
+static int rdc321x_wdt_stop(void)
+{
+	if (rdc321x_wdt_device.running)
+		rdc321x_wdt_device.running = 0;
+
+	ticks = rdc321x_wdt_device.default_ticks;
+
+	return -EIO;
+}
+
+/* filesystem operations */
+static int rdc321x_wdt_open(struct inode *inode, struct file *file)
+{
+	if (test_and_set_bit(0, &rdc321x_wdt_device.inuse))
+		return -EBUSY;
+
+	return nonseekable_open(inode, file);
+}
+
+static int rdc321x_wdt_release(struct inode *inode, struct file *file)
+{
+	clear_bit(0, &rdc321x_wdt_device.inuse);
+	return 0;
+}
+
+static int rdc321x_wdt_ioctl(struct inode *inode, struct file *file,
+				unsigned int cmd, unsigned long arg)
+{
+	void __user *argp = (void __user *)arg;
+	unsigned int value;
+	static struct watchdog_info ident = {
+		.options = WDIOF_CARDRESET,
+		.identity = "RDC321x WDT",
+	};
+	unsigned long flags;
+
+	switch (cmd) {
+	case WDIOC_KEEPALIVE:
+		rdc321x_wdt_reset();
+		break;
+	case WDIOC_GETSTATUS:
+		/* Read the value from the DATA register */
+		spin_lock_irqsave(&rdc321x_wdt_device.lock, flags);
+		value = inl(RDC3210_CFGREG_DATA);
+		spin_unlock_irqrestore(&rdc321x_wdt_device.lock, flags);
+		if (copy_to_user(argp, &value, sizeof(int)))
+			return -EFAULT;
+		break;
+	case WDIOC_GETSUPPORT:
+		if (copy_to_user(argp, &ident, sizeof(ident)))
+			return -EFAULT;
+		break;
+	case WDIOC_SETOPTIONS:
+		if (copy_from_user(&value, argp, sizeof(int)))
+			return -EFAULT;
+		switch (value) {
+		case WDIOS_ENABLECARD:
+			rdc321x_wdt_start();
+			break;
+		case WDIOS_DISABLECARD:
+			return rdc321x_wdt_stop();
+		default:
+			return -EINVAL;
+		}
+		break;
+	default:
+		return -ENOTTY;
+	}
+	return 0;
+}
+
+static ssize_t rdc321x_wdt_write(struct file *file, const char __user *buf,
+				size_t count, loff_t *ppos)
+{
+	if (!count)
+		return -EIO;
+
+	rdc321x_wdt_reset();
+
+	return count;
+}
+
+static const struct file_operations rdc321x_wdt_fops = {
+	.owner		= THIS_MODULE,
+	.llseek		= no_llseek,
+	.ioctl		= rdc321x_wdt_ioctl,
+	.open		= rdc321x_wdt_open,
+	.write		= rdc321x_wdt_write,
+	.release	= rdc321x_wdt_release,
+};
+
+static struct miscdevice rdc321x_wdt_misc = {
+	.minor	= WATCHDOG_MINOR,
+	.name	= "watchdog",
+	.fops	= &rdc321x_wdt_fops,
+};
+
+static int __devinit rdc321x_wdt_probe(struct platform_device *pdev)
+{
+	int err;
+
+	err = misc_register(&rdc321x_wdt_misc);
+	if (err < 0) {
+		printk(KERN_ERR PFX "watchdog misc_register failed\n");
+		return err;
+	}
+
+	spin_lock_init(&rdc321x_wdt_device.lock);
+
+	/* Reset the watchdog */
+	outl(RDC_WDT_RST, RDC3210_CFGREG_DATA);
+
+	init_completion(&rdc321x_wdt_device.stop);
+	rdc321x_wdt_device.queue = 0;
+
+	clear_bit(0, &rdc321x_wdt_device.inuse);
+
+	setup_timer(&rdc321x_wdt_device.timer, rdc321x_wdt_trigger, 0);
+
+	rdc321x_wdt_device.default_ticks = ticks;
+
+	printk(KERN_INFO PFX "watchdog init success\n");
+
+	return 0;
+}
+
+static int rdc321x_wdt_remove(struct platform_device *pdev)
+{
+	if (rdc321x_wdt_device.queue) {
+		rdc321x_wdt_device.queue = 0;
+		wait_for_completion(&rdc321x_wdt_device.stop);
+	}
+
+	misc_deregister(&rdc321x_wdt_misc);
+
+	return 0;
+}
+
+static struct platform_driver rdc321x_wdt_driver = {
+	.probe = rdc321x_wdt_probe,
+	.remove = rdc321x_wdt_remove,
+	.driver = {
+		.owner = THIS_MODULE,
+		.name = "rdc321x-wdt",
+	},
+};
+
+static int __init rdc321x_wdt_init(void)
+{
+	return platform_driver_register(&rdc321x_wdt_driver);
+}
+
+static void __exit rdc321x_wdt_exit(void)
+{
+	platform_driver_unregister(&rdc321x_wdt_driver);
+}
+
+module_init(rdc321x_wdt_init);
+module_exit(rdc321x_wdt_exit);
+
+MODULE_AUTHOR("Florian Fainelli <florian@openwrt.org>");
+MODULE_DESCRIPTION("RDC321x watchdog driver");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR);
diff --git a/drivers/watchdog/rm9k_wdt.c b/drivers/watchdog/rm9k_wdt.c
index 5c921e471564..f1ae3729a19e 100644
--- a/drivers/watchdog/rm9k_wdt.c
+++ b/drivers/watchdog/rm9k_wdt.c
@@ -29,10 +29,10 @@
 #include <linux/notifier.h>
 #include <linux/miscdevice.h>
 #include <linux/watchdog.h>
-#include <asm/io.h>
+#include <linux/io.h>
+#include <linux/uaccess.h>
 #include <asm/atomic.h>
 #include <asm/processor.h>
-#include <asm/uaccess.h>
 #include <asm/system.h>
 #include <asm/rm9k-ocd.h>
 
@@ -53,10 +53,12 @@ static void wdt_gpi_stop(void);
 static void wdt_gpi_set_timeout(unsigned int);
 static int wdt_gpi_open(struct inode *, struct file *);
 static int wdt_gpi_release(struct inode *, struct file *);
-static ssize_t wdt_gpi_write(struct file *, const char __user *, size_t, loff_t *);
+static ssize_t wdt_gpi_write(struct file *, const char __user *, size_t,
+								loff_t *);
 static long wdt_gpi_ioctl(struct file *, unsigned int, unsigned long);
 static int wdt_gpi_notify(struct notifier_block *, unsigned long, void *);
-static const struct resource *wdt_gpi_get_resource(struct platform_device *, const char *, unsigned int);
+static const struct resource *wdt_gpi_get_resource(struct platform_device *,
+						const char *, unsigned int);
 static int __init wdt_gpi_probe(struct device *);
 static int __exit wdt_gpi_remove(struct device *);
 
@@ -68,7 +70,7 @@ static int locked;
 
 
 /* These are set from device resources */
-static void __iomem * wd_regs;
+static void __iomem *wd_regs;
 static unsigned int wd_irq, wd_ctr;
 
 
@@ -216,7 +218,8 @@ static int wdt_gpi_release(struct inode *inode, struct file *file)
 		if (expect_close) {
 			wdt_gpi_stop();
 			free_irq(wd_irq, &miscdev);
-			printk(KERN_INFO "%s: watchdog stopped\n", wdt_gpi_name);
+			printk(KERN_INFO "%s: watchdog stopped\n",
+							wdt_gpi_name);
 		} else {
 			printk(KERN_CRIT "%s: unexpected close() -"
 				" watchdog left running\n",
@@ -231,8 +234,8 @@ static int wdt_gpi_release(struct inode *inode, struct file *file)
 	return 0;
 }
 
-static ssize_t
-wdt_gpi_write(struct file *f, const char __user *d, size_t s, loff_t *o)
+static ssize_t wdt_gpi_write(struct file *f, const char __user *d, size_t s,
+								loff_t *o)
 {
 	char val;
 
@@ -241,8 +244,7 @@ wdt_gpi_write(struct file *f, const char __user *d, size_t s, loff_t *o)
 	return s ? 1 : 0;
 }
 
-static long
-wdt_gpi_ioctl(struct file *f, unsigned int cmd, unsigned long arg)
+static long wdt_gpi_ioctl(struct file *f, unsigned int cmd, unsigned long arg)
 {
 	long res = -ENOTTY;
 	const long size = _IOC_SIZE(cmd);
@@ -271,7 +273,8 @@ wdt_gpi_ioctl(struct file *f, unsigned int cmd, unsigned long arg)
 	case WDIOC_GETSUPPORT:
 		wdinfo.options = nowayout ?
 			WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING :
-			WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING | WDIOF_MAGICCLOSE;
+			WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING |
+			WDIOF_MAGICCLOSE;
 		res = __copy_to_user(argp, &wdinfo, size) ?  -EFAULT : size;
 		break;
 
@@ -322,8 +325,8 @@ wdt_gpi_ioctl(struct file *f, unsigned int cmd, unsigned long arg)
 
 
 /* Shutdown notifier */
-static int
-wdt_gpi_notify(struct notifier_block *this, unsigned long code, void *unused)
+static int wdt_gpi_notify(struct notifier_block *this, unsigned long code,
+			  void *unused)
 {
 	if (code == SYS_DOWN || code == SYS_HALT)
 		wdt_gpi_stop();
@@ -333,9 +336,8 @@ wdt_gpi_notify(struct notifier_block *this, unsigned long code, void *unused)
 
 
 /* Init & exit procedures */
-static const struct resource *
-wdt_gpi_get_resource(struct platform_device *pdv, const char *name,
-		      unsigned int type)
+static const struct resource *wdt_gpi_get_resource(struct platform_device *pdv,
+					const char *name, unsigned int type)
 {
 	char buf[80];
 	if (snprintf(buf, sizeof buf, "%s_0", name) >= sizeof buf)
diff --git a/drivers/watchdog/s3c2410_wdt.c b/drivers/watchdog/s3c2410_wdt.c
index 98532c0e0689..86d42801de45 100644
--- a/drivers/watchdog/s3c2410_wdt.c
+++ b/drivers/watchdog/s3c2410_wdt.c
@@ -21,18 +21,6 @@
  * You should have received a copy of the GNU General Public License
  * along with this program; if not, write to the Free Software
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- *
- * Changelog:
- *	05-Oct-2004	BJD	Added semaphore init to stop crashes on open
- *				Fixed tmr_count / wdt_count confusion
- *				Added configurable debug
- *
- *	11-Jan-2005	BJD	Fixed divide-by-2 in timeout code
- *
- *	25-Jan-2005	DA	Added suspend/resume support
- *				Replaced reboot notifier with .shutdown method
- *
- *	10-Mar-2005	LCVR	Changed S3C2410_VA to S3C24XX_VA
 */
 
 #include <linux/module.h>
@@ -46,11 +34,10 @@
 #include <linux/platform_device.h>
 #include <linux/interrupt.h>
 #include <linux/clk.h>
+#include <linux/uaccess.h>
+#include <linux/io.h>
 
-#include <asm/uaccess.h>
-#include <asm/io.h>
-
-#include <asm/arch/map.h>
+#include <mach/map.h>
 
 #undef S3C_VA_WATCHDOG
 #define S3C_VA_WATCHDOG (0)
@@ -65,8 +52,8 @@
 static int nowayout	= WATCHDOG_NOWAYOUT;
 static int tmr_margin	= CONFIG_S3C2410_WATCHDOG_DEFAULT_TIME;
 static int tmr_atboot	= CONFIG_S3C2410_WATCHDOG_ATBOOT;
-static int soft_noboot	= 0;
-static int debug	= 0;
+static int soft_noboot;
+static int debug;
 
 module_param(tmr_margin,  int, 0);
 module_param(tmr_atboot,  int, 0);
@@ -74,24 +61,23 @@ module_param(nowayout,    int, 0);
 module_param(soft_noboot, int, 0);
 module_param(debug,	  int, 0);
 
-MODULE_PARM_DESC(tmr_margin, "Watchdog tmr_margin in seconds. default=" __MODULE_STRING(CONFIG_S3C2410_WATCHDOG_DEFAULT_TIME) ")");
-
-MODULE_PARM_DESC(tmr_atboot, "Watchdog is started at boot time if set to 1, default=" __MODULE_STRING(CONFIG_S3C2410_WATCHDOG_ATBOOT));
-
-MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=" __MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
-
+MODULE_PARM_DESC(tmr_margin, "Watchdog tmr_margin in seconds. default="
+		__MODULE_STRING(CONFIG_S3C2410_WATCHDOG_DEFAULT_TIME) ")");
+MODULE_PARM_DESC(tmr_atboot,
+		"Watchdog is started at boot time if set to 1, default="
+			__MODULE_STRING(CONFIG_S3C2410_WATCHDOG_ATBOOT));
+MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default="
+			__MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
 MODULE_PARM_DESC(soft_noboot, "Watchdog action, set to 1 to ignore reboots, 0 to reboot (default depends on ONLY_TESTING)");
-
 MODULE_PARM_DESC(debug, "Watchdog debug, set to >1 for debug, (default 0)");
 
 
 typedef enum close_state {
 	CLOSE_STATE_NOT,
-	CLOSE_STATE_ALLOW=0x4021
+	CLOSE_STATE_ALLOW = 0x4021
 } close_state_t;
 
-static DECLARE_MUTEX(open_lock);
-
+static unsigned long open_lock;
 static struct device    *wdt_dev;	/* platform device attached to */
 static struct resource	*wdt_mem;
 static struct resource	*wdt_irq;
@@ -99,38 +85,47 @@ static struct clk	*wdt_clock;
 static void __iomem	*wdt_base;
 static unsigned int	 wdt_count;
 static close_state_t	 allow_close;
+static DEFINE_SPINLOCK(wdt_lock);
 
 /* watchdog control routines */
 
 #define DBG(msg...) do { \
 	if (debug) \
 		printk(KERN_INFO msg); \
-	} while(0)
+	} while (0)
 
 /* functions */
 
-static int s3c2410wdt_keepalive(void)
+static void s3c2410wdt_keepalive(void)
 {
+	spin_lock(&wdt_lock);
 	writel(wdt_count, wdt_base + S3C2410_WTCNT);
-	return 0;
+	spin_unlock(&wdt_lock);
 }
 
-static int s3c2410wdt_stop(void)
+static void __s3c2410wdt_stop(void)
 {
 	unsigned long wtcon;
 
 	wtcon = readl(wdt_base + S3C2410_WTCON);
 	wtcon &= ~(S3C2410_WTCON_ENABLE | S3C2410_WTCON_RSTEN);
 	writel(wtcon, wdt_base + S3C2410_WTCON);
+}
 
-	return 0;
+static void s3c2410wdt_stop(void)
+{
+	spin_lock(&wdt_lock);
+	__s3c2410wdt_stop();
+	spin_unlock(&wdt_lock);
 }
 
-static int s3c2410wdt_start(void)
+static void s3c2410wdt_start(void)
 {
 	unsigned long wtcon;
 
-	s3c2410wdt_stop();
+	spin_lock(&wdt_lock);
+
+	__s3c2410wdt_stop();
 
 	wtcon = readl(wdt_base + S3C2410_WTCON);
 	wtcon |= S3C2410_WTCON_ENABLE | S3C2410_WTCON_DIV128;
@@ -149,8 +144,7 @@ static int s3c2410wdt_start(void)
 	writel(wdt_count, wdt_base + S3C2410_WTDAT);
 	writel(wdt_count, wdt_base + S3C2410_WTCNT);
 	writel(wtcon, wdt_base + S3C2410_WTCON);
-
-	return 0;
+	spin_unlock(&wdt_lock);
 }
 
 static int s3c2410wdt_set_heartbeat(int timeout)
@@ -211,7 +205,7 @@ static int s3c2410wdt_set_heartbeat(int timeout)
 
 static int s3c2410wdt_open(struct inode *inode, struct file *file)
 {
-	if(down_trylock(&open_lock))
+	if (test_and_set_bit(0, &open_lock))
 		return -EBUSY;
 
 	if (nowayout)
@@ -231,15 +225,14 @@ static int s3c2410wdt_release(struct inode *inode, struct file *file)
 	 * 	Lock it in if it's a module and we set nowayout
 	 */
 
-	if (allow_close == CLOSE_STATE_ALLOW) {
+	if (allow_close == CLOSE_STATE_ALLOW)
 		s3c2410wdt_stop();
-	} else {
+	else {
 		dev_err(wdt_dev, "Unexpected close, not stopping watchdog\n");
 		s3c2410wdt_keepalive();
 	}
-
 	allow_close = CLOSE_STATE_NOT;
-	up(&open_lock);
+	clear_bit(0, &open_lock);
 	return 0;
 }
 
@@ -249,7 +242,7 @@ static ssize_t s3c2410wdt_write(struct file *file, const char __user *data,
 	/*
 	 *	Refresh the timer.
 	 */
-	if(len) {
+	if (len) {
 		if (!nowayout) {
 			size_t i;
 
@@ -265,7 +258,6 @@ static ssize_t s3c2410wdt_write(struct file *file, const char __user *data,
 					allow_close = CLOSE_STATE_ALLOW;
 			}
 		}
-
 		s3c2410wdt_keepalive();
 	}
 	return len;
@@ -273,48 +265,41 @@ static ssize_t s3c2410wdt_write(struct file *file, const char __user *data,
 
 #define OPTIONS WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING | WDIOF_MAGICCLOSE
 
-static struct watchdog_info s3c2410_wdt_ident = {
+static const struct watchdog_info s3c2410_wdt_ident = {
 	.options          =     OPTIONS,
 	.firmware_version =	0,
 	.identity         =	"S3C2410 Watchdog",
 };
 
 
-static int s3c2410wdt_ioctl(struct inode *inode, struct file *file,
-	unsigned int cmd, unsigned long arg)
+static long s3c2410wdt_ioctl(struct file *file,	unsigned int cmd,
+							unsigned long arg)
 {
 	void __user *argp = (void __user *)arg;
 	int __user *p = argp;
 	int new_margin;
 
 	switch (cmd) {
-		default:
-			return -ENOTTY;
-
-		case WDIOC_GETSUPPORT:
-			return copy_to_user(argp, &s3c2410_wdt_ident,
-				sizeof(s3c2410_wdt_ident)) ? -EFAULT : 0;
-
-		case WDIOC_GETSTATUS:
-		case WDIOC_GETBOOTSTATUS:
-			return put_user(0, p);
-
-		case WDIOC_KEEPALIVE:
-			s3c2410wdt_keepalive();
-			return 0;
-
-		case WDIOC_SETTIMEOUT:
-			if (get_user(new_margin, p))
-				return -EFAULT;
-
-			if (s3c2410wdt_set_heartbeat(new_margin))
-				return -EINVAL;
-
-			s3c2410wdt_keepalive();
-			return put_user(tmr_margin, p);
-
-		case WDIOC_GETTIMEOUT:
-			return put_user(tmr_margin, p);
+	case WDIOC_GETSUPPORT:
+		return copy_to_user(argp, &s3c2410_wdt_ident,
+			sizeof(s3c2410_wdt_ident)) ? -EFAULT : 0;
+	case WDIOC_GETSTATUS:
+	case WDIOC_GETBOOTSTATUS:
+		return put_user(0, p);
+	case WDIOC_KEEPALIVE:
+		s3c2410wdt_keepalive();
+		return 0;
+	case WDIOC_SETTIMEOUT:
+		if (get_user(new_margin, p))
+			return -EFAULT;
+		if (s3c2410wdt_set_heartbeat(new_margin))
+			return -EINVAL;
+		s3c2410wdt_keepalive();
+		return put_user(tmr_margin, p);
+	case WDIOC_GETTIMEOUT:
+		return put_user(tmr_margin, p);
+	default:
+		return -ENOTTY;
 	}
 }
 
@@ -324,7 +309,7 @@ static const struct file_operations s3c2410wdt_fops = {
 	.owner		= THIS_MODULE,
 	.llseek		= no_llseek,
 	.write		= s3c2410wdt_write,
-	.ioctl		= s3c2410wdt_ioctl,
+	.unlocked_ioctl	= s3c2410wdt_ioctl,
 	.open		= s3c2410wdt_open,
 	.release	= s3c2410wdt_release,
 };
@@ -368,7 +353,7 @@ static int s3c2410wdt_probe(struct platform_device *pdev)
 		return -ENOENT;
 	}
 
-	size = (res->end-res->start)+1;
+	size = (res->end - res->start) + 1;
 	wdt_mem = request_mem_region(res->start, size, pdev->name);
 	if (wdt_mem == NULL) {
 		dev_err(dev, "failed to get memory region\n");
@@ -377,7 +362,7 @@ static int s3c2410wdt_probe(struct platform_device *pdev)
 	}
 
 	wdt_base = ioremap(res->start, size);
-	if (wdt_base == 0) {
+	if (wdt_base == NULL) {
 		dev_err(dev, "failed to ioremap() region\n");
 		ret = -EINVAL;
 		goto err_req;
@@ -411,14 +396,15 @@ static int s3c2410wdt_probe(struct platform_device *pdev)
 	 * not, try the default value */
 
 	if (s3c2410wdt_set_heartbeat(tmr_margin)) {
-		started = s3c2410wdt_set_heartbeat(CONFIG_S3C2410_WATCHDOG_DEFAULT_TIME);
+		started = s3c2410wdt_set_heartbeat(
+					CONFIG_S3C2410_WATCHDOG_DEFAULT_TIME);
 
-		if (started == 0) {
-			dev_info(dev,"tmr_margin value out of range, default %d used\n",
+		if (started == 0)
+			dev_info(dev,
+			   "tmr_margin value out of range, default %d used\n",
 			       CONFIG_S3C2410_WATCHDOG_DEFAULT_TIME);
-		} else {
+		else
 			dev_info(dev, "default timer value is out of range, cannot start\n");
-		}
 	}
 
 	ret = misc_register(&s3c2410wdt_miscdev);
@@ -447,7 +433,7 @@ static int s3c2410wdt_probe(struct platform_device *pdev)
 		 (wtcon & S3C2410_WTCON_ENABLE) ?  "" : "in",
 		 (wtcon & S3C2410_WTCON_RSTEN) ? "" : "dis",
 		 (wtcon & S3C2410_WTCON_INTEN) ? "" : "en");
-	
+
 	return 0;
 
  err_clk:
@@ -487,7 +473,7 @@ static int s3c2410wdt_remove(struct platform_device *dev)
 
 static void s3c2410wdt_shutdown(struct platform_device *dev)
 {
-	s3c2410wdt_stop();	
+	s3c2410wdt_stop();
 }
 
 #ifdef CONFIG_PM
@@ -540,7 +526,8 @@ static struct platform_driver s3c2410wdt_driver = {
 };
 
 
-static char banner[] __initdata = KERN_INFO "S3C2410 Watchdog Timer, (c) 2004 Simtec Electronics\n";
+static char banner[] __initdata =
+	KERN_INFO "S3C2410 Watchdog Timer, (c) 2004 Simtec Electronics\n";
 
 static int __init watchdog_init(void)
 {
diff --git a/drivers/watchdog/sa1100_wdt.c b/drivers/watchdog/sa1100_wdt.c
index 34a2b3b81800..31a48437dc3d 100644
--- a/drivers/watchdog/sa1100_wdt.c
+++ b/drivers/watchdog/sa1100_wdt.c
@@ -26,13 +26,14 @@
 #include <linux/watchdog.h>
 #include <linux/init.h>
 #include <linux/bitops.h>
+#include <linux/uaccess.h>
 
 #ifdef CONFIG_ARCH_PXA
-#include <asm/arch/pxa-regs.h>
+#include <mach/pxa-regs.h>
 #endif
 
-#include <asm/hardware.h>
-#include <asm/uaccess.h>
+#include <mach/reset.h>
+#include <mach/hardware.h>
 
 #define OSCR_FREQ		CLOCK_TICK_RATE
 
@@ -45,7 +46,7 @@ static int boot_status;
  */
 static int sa1100dog_open(struct inode *inode, struct file *file)
 {
-	if (test_and_set_bit(1,&sa1100wdt_users))
+	if (test_and_set_bit(1, &sa1100wdt_users))
 		return -EBUSY;
 
 	/* Activate SA1100 Watchdog timer */
@@ -66,28 +67,27 @@ static int sa1100dog_open(struct inode *inode, struct file *file)
 static int sa1100dog_release(struct inode *inode, struct file *file)
 {
 	printk(KERN_CRIT "WATCHDOG: Device closed - timer will not stop\n");
-
 	clear_bit(1, &sa1100wdt_users);
-
 	return 0;
 }
 
-static ssize_t sa1100dog_write(struct file *file, const char __user *data, size_t len, loff_t *ppos)
+static ssize_t sa1100dog_write(struct file *file, const char __user *data,
+						size_t len, loff_t *ppos)
 {
 	if (len)
 		/* Refresh OSMR3 timer. */
 		OSMR3 = OSCR + pre_margin;
-
 	return len;
 }
 
-static struct watchdog_info ident = {
-	.options	= WDIOF_CARDRESET | WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING,
+static const struct watchdog_info ident = {
+	.options	= WDIOF_CARDRESET | WDIOF_SETTIMEOUT
+				| WDIOF_KEEPALIVEPING,
 	.identity	= "SA1100/PXA255 Watchdog",
 };
 
-static int sa1100dog_ioctl(struct inode *inode, struct file *file,
-	unsigned int cmd, unsigned long arg)
+static long sa1100dog_ioctl(struct file *file, unsigned int cmd,
+							unsigned long arg)
 {
 	int ret = -ENOTTY;
 	int time;
@@ -108,6 +108,11 @@ static int sa1100dog_ioctl(struct inode *inode, struct file *file,
 		ret = put_user(boot_status, p);
 		break;
 
+	case WDIOC_KEEPALIVE:
+		OSMR3 = OSCR + pre_margin;
+		ret = 0;
+		break;
+
 	case WDIOC_SETTIMEOUT:
 		ret = get_user(time, p);
 		if (ret)
@@ -125,27 +130,20 @@ static int sa1100dog_ioctl(struct inode *inode, struct file *file,
 	case WDIOC_GETTIMEOUT:
 		ret = put_user(pre_margin / OSCR_FREQ, p);
 		break;
-
-	case WDIOC_KEEPALIVE:
-		OSMR3 = OSCR + pre_margin;
-		ret = 0;
-		break;
 	}
 	return ret;
 }
 
-static const struct file_operations sa1100dog_fops =
-{
+static const struct file_operations sa1100dog_fops = {
 	.owner		= THIS_MODULE,
 	.llseek		= no_llseek,
 	.write		= sa1100dog_write,
-	.ioctl		= sa1100dog_ioctl,
+	.unlocked_ioctl	= sa1100dog_ioctl,
 	.open		= sa1100dog_open,
 	.release	= sa1100dog_release,
 };
 
-static struct miscdevice sa1100dog_miscdev =
-{
+static struct miscdevice sa1100dog_miscdev = {
 	.minor		= WATCHDOG_MINOR,
 	.name		= "watchdog",
 	.fops		= &sa1100dog_fops,
@@ -162,13 +160,15 @@ static int __init sa1100dog_init(void)
 	 * we suspend, RCSR will be cleared, and the watchdog
 	 * reset reason will be lost.
 	 */
-	boot_status = (RCSR & RCSR_WDR) ? WDIOF_CARDRESET : 0;
+	boot_status = (reset_status & RESET_STATUS_WATCHDOG) ?
+				WDIOF_CARDRESET : 0;
 	pre_margin = OSCR_FREQ * margin;
 
 	ret = misc_register(&sa1100dog_miscdev);
 	if (ret == 0)
-		printk("SA1100/PXA2xx Watchdog Timer: timer margin %d sec\n",
-		       margin);
+		printk(KERN_INFO
+			"SA1100/PXA2xx Watchdog Timer: timer margin %d sec\n",
+						margin);
 	return ret;
 }
 
diff --git a/drivers/watchdog/sb_wdog.c b/drivers/watchdog/sb_wdog.c
index b94431433695..27e526a07c9a 100644
--- a/drivers/watchdog/sb_wdog.c
+++ b/drivers/watchdog/sb_wdog.c
@@ -57,6 +57,7 @@
 #include <asm/sibyte/sb1250_int.h>
 #include <asm/sibyte/sb1250_scd.h>
 
+static DEFINE_SPINLOCK(sbwd_lock);
 
 /*
  * set the initial count value of a timer
@@ -65,8 +66,10 @@
  */
 void sbwdog_set(char __iomem *wdog, unsigned long t)
 {
+	spin_lock(&sbwd_lock);
 	__raw_writeb(0, wdog - 0x10);
 	__raw_writeq(t & 0x7fffffUL, wdog);
+	spin_unlock(&sbwd_lock);
 }
 
 /*
@@ -77,7 +80,9 @@ void sbwdog_set(char __iomem *wdog, unsigned long t)
  */
 void sbwdog_pet(char __iomem *wdog)
 {
+	spin_lock(&sbwd_lock);
 	__raw_writeb(__raw_readb(wdog) | 1, wdog);
+	spin_unlock(&sbwd_lock);
 }
 
 static unsigned long sbwdog_gate; /* keeps it to one thread only */
@@ -86,8 +91,9 @@ static char __iomem *user_dog = (char __iomem *)(IO_BASE + (A_SCD_WDOG_CFG_1));
 static unsigned long timeout = 0x7fffffUL;	/* useconds: 8.3ish secs. */
 static int expect_close;
 
-static struct watchdog_info ident = {
-	.options	= WDIOF_CARDRESET | WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING,
+static const struct watchdog_info ident = {
+	.options	= WDIOF_CARDRESET | WDIOF_SETTIMEOUT |
+						WDIOF_KEEPALIVEPING,
 	.identity	= "SiByte Watchdog",
 };
 
@@ -97,9 +103,8 @@ static struct watchdog_info ident = {
 static int sbwdog_open(struct inode *inode, struct file *file)
 {
 	nonseekable_open(inode, file);
-	if (test_and_set_bit(0, &sbwdog_gate)) {
+	if (test_and_set_bit(0, &sbwdog_gate))
 		return -EBUSY;
-	}
 	__module_get(THIS_MODULE);
 
 	/*
@@ -120,8 +125,9 @@ static int sbwdog_release(struct inode *inode, struct file *file)
 		__raw_writeb(0, user_dog);
 		module_put(THIS_MODULE);
 	} else {
-		printk(KERN_CRIT "%s: Unexpected close, not stopping watchdog!\n",
-			ident.identity);
+		printk(KERN_CRIT
+			"%s: Unexpected close, not stopping watchdog!\n",
+						ident.identity);
 		sbwdog_pet(user_dog);
 	}
 	clear_bit(0, &sbwdog_gate);
@@ -147,12 +153,10 @@ static ssize_t sbwdog_write(struct file *file, const char __user *data,
 		for (i = 0; i != len; i++) {
 			char c;
 
-			if (get_user(c, data + i)) {
+			if (get_user(c, data + i))
 				return -EFAULT;
-			}
-			if (c == 'V') {
+			if (c == 'V')
 				expect_close = 42;
-			}
 		}
 		sbwdog_pet(user_dog);
 	}
@@ -160,8 +164,8 @@ static ssize_t sbwdog_write(struct file *file, const char __user *data,
 	return len;
 }
 
-static int sbwdog_ioctl(struct inode *inode, struct file *file,
-			unsigned int cmd, unsigned long arg)
+static long sbwdog_ioctl(struct file *file, unsigned int cmd,
+						unsigned long arg)
 {
 	int ret = -ENOTTY;
 	unsigned long time;
@@ -178,11 +182,15 @@ static int sbwdog_ioctl(struct inode *inode, struct file *file,
 		ret = put_user(0, p);
 		break;
 
+	case WDIOC_KEEPALIVE:
+		sbwdog_pet(user_dog);
+		ret = 0;
+		break;
+
 	case WDIOC_SETTIMEOUT:
 		ret = get_user(time, p);
-		if (ret) {
+		if (ret)
 			break;
-		}
 
 		time *= 1000000;
 		if (time > 0x7fffffUL) {
@@ -200,11 +208,6 @@ static int sbwdog_ioctl(struct inode *inode, struct file *file,
 		 */
 		ret = put_user(__raw_readq(user_dog - 8) / 1000000, p);
 		break;
-
-	case WDIOC_KEEPALIVE:
-		sbwdog_pet(user_dog);
-		ret = 0;
-		break;
 	}
 	return ret;
 }
@@ -212,8 +215,8 @@ static int sbwdog_ioctl(struct inode *inode, struct file *file,
 /*
  *	Notifier for system down
  */
-static int
-sbwdog_notify_sys(struct notifier_block *this, unsigned long code, void *erf)
+static int sbwdog_notify_sys(struct notifier_block *this, unsigned long code,
+								void *erf)
 {
 	if (code == SYS_DOWN || code == SYS_HALT) {
 		/*
@@ -226,18 +229,16 @@ sbwdog_notify_sys(struct notifier_block *this, unsigned long code, void *erf)
 	return NOTIFY_DONE;
 }
 
-static const struct file_operations sbwdog_fops =
-{
+static const struct file_operations sbwdog_fops = {
 	.owner		= THIS_MODULE,
 	.llseek		= no_llseek,
 	.write		= sbwdog_write,
-	.ioctl		= sbwdog_ioctl,
+	.unlocked_ioctl	= sbwdog_ioctl,
 	.open		= sbwdog_open,
 	.release	= sbwdog_release,
 };
 
-static struct miscdevice sbwdog_miscdev =
-{
+static struct miscdevice sbwdog_miscdev = {
 	.minor		= WATCHDOG_MINOR,
 	.name		= "watchdog",
 	.fops		= &sbwdog_fops,
@@ -267,13 +268,12 @@ irqreturn_t sbwdog_interrupt(int irq, void *addr)
 	/*
 	 * if it's the second watchdog timer, it's for those users
 	 */
-	if (wd_cfg_reg == user_dog) {
+	if (wd_cfg_reg == user_dog)
 		printk(KERN_CRIT
 			"%s in danger of initiating system reset in %ld.%01ld seconds\n",
 			ident.identity, wd_init / 1000000, (wd_init / 100000) % 10);
-	} else {
+	else
 		cfg |= 1;
-	}
 
 	__raw_writeb(cfg, wd_cfg_reg);
 
@@ -289,28 +289,31 @@ static int __init sbwdog_init(void)
 	 */
 	ret = register_reboot_notifier(&sbwdog_notifier);
 	if (ret) {
-		printk (KERN_ERR "%s: cannot register reboot notifier (err=%d)\n",
-			ident.identity, ret);
+		printk(KERN_ERR
+			"%s: cannot register reboot notifier (err=%d)\n",
+						ident.identity, ret);
 		return ret;
 	}
 
 	/*
 	 * get the resources
 	 */
-	ret = misc_register(&sbwdog_miscdev);
-	if (ret == 0) {
-		printk(KERN_INFO "%s: timeout is %ld.%ld secs\n", ident.identity,
-			timeout / 1000000, (timeout / 100000) % 10);
-	}
 
 	ret = request_irq(1, sbwdog_interrupt, IRQF_DISABLED | IRQF_SHARED,
 		ident.identity, (void *)user_dog);
 	if (ret) {
-		printk(KERN_ERR "%s: failed to request irq 1 - %d\n", ident.identity,
-			ret);
-		misc_deregister(&sbwdog_miscdev);
+		printk(KERN_ERR "%s: failed to request irq 1 - %d\n",
+						ident.identity, ret);
+		return ret;
 	}
 
+	ret = misc_register(&sbwdog_miscdev);
+	if (ret == 0) {
+		printk(KERN_INFO "%s: timeout is %ld.%ld secs\n",
+				ident.identity,
+				timeout / 1000000, (timeout / 100000) % 10);
+	} else
+		free_irq(1, (void *)user_dog);
 	return ret;
 }
 
@@ -327,7 +330,7 @@ MODULE_DESCRIPTION("SiByte Watchdog");
 
 module_param(timeout, ulong, 0);
 MODULE_PARM_DESC(timeout,
-	"Watchdog timeout in microseconds (max/default 8388607 or 8.3ish secs)");
+      "Watchdog timeout in microseconds (max/default 8388607 or 8.3ish secs)");
 
 MODULE_LICENSE("GPL");
 MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR);
@@ -336,16 +339,15 @@ MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR);
  * example code that can be put in a platform code area to utilize the
  * first watchdog timer for the kernels own purpose.
 
- void
-platform_wd_setup(void)
+void platform_wd_setup(void)
 {
 	int ret;
 
-	ret = request_irq(0, sbwdog_interrupt, IRQF_DISABLED | IRQF_SHARED,
+	ret = request_irq(1, sbwdog_interrupt, IRQF_DISABLED | IRQF_SHARED,
 		"Kernel Watchdog", IOADDR(A_SCD_WDOG_CFG_0));
 	if (ret) {
-		printk(KERN_CRIT "Watchdog IRQ zero(0) failed to be requested - %d\n",
-			ret);
+		printk(KERN_CRIT
+		  "Watchdog IRQ zero(0) failed to be requested - %d\n", ret);
 	}
 }
 
diff --git a/drivers/watchdog/sbc60xxwdt.c b/drivers/watchdog/sbc60xxwdt.c
index ef76f01625e7..3266daaaecf8 100644
--- a/drivers/watchdog/sbc60xxwdt.c
+++ b/drivers/watchdog/sbc60xxwdt.c
@@ -16,19 +16,23 @@
  *
  *           12/4 - 2000      [Initial revision]
  *           25/4 - 2000      Added /dev/watchdog support
- *           09/5 - 2001      [smj@oro.net] fixed fop_write to "return 1" on success
+ *           09/5 - 2001      [smj@oro.net] fixed fop_write to "return 1"
+ *					on success
  *           12/4 - 2002      [rob@osinvestor.com] eliminate fop_read
  *                            fix possible wdt_is_open race
  *                            add CONFIG_WATCHDOG_NOWAYOUT support
  *                            remove lock_kernel/unlock_kernel pairs
  *                            added KERN_* to printk's
  *                            got rid of extraneous comments
- *                            changed watchdog_info to correctly reflect what the driver offers
- *                            added WDIOC_GETSTATUS, WDIOC_GETBOOTSTATUS, WDIOC_SETTIMEOUT,
- *                            WDIOC_GETTIMEOUT, and WDIOC_SETOPTIONS ioctls
+ *                            changed watchdog_info to correctly reflect what
+ *			      the driver offers
+ *			      added WDIOC_GETSTATUS, WDIOC_GETBOOTSTATUS,
+ *			      WDIOC_SETTIMEOUT, WDIOC_GETTIMEOUT, and
+ *			      WDIOC_SETOPTIONS ioctls
  *           09/8 - 2003      [wim@iguana.be] cleanup of trailing spaces
  *                            use module_param
- *                            made timeout (the emulated heartbeat) a module_param
+ *                            made timeout (the emulated heartbeat) a
+ *			      module_param
  *                            made the keepalive ping an internal subroutine
  *                            made wdt_stop and wdt_start module params
  *                            added extra printk's for startup problems
@@ -56,9 +60,9 @@
 #include <linux/notifier.h>
 #include <linux/reboot.h>
 #include <linux/init.h>
+#include <linux/io.h>
+#include <linux/uaccess.h>
 
-#include <asm/io.h>
-#include <asm/uaccess.h>
 #include <asm/system.h>
 
 #define OUR_NAME "sbc60xxwdt"
@@ -94,13 +98,18 @@ MODULE_PARM_DESC(wdt_start, "SBC60xx WDT 'start' io port (default 0x443)");
  */
 
 #define WATCHDOG_TIMEOUT 30		/* 30 sec default timeout */
-static int timeout = WATCHDOG_TIMEOUT;	/* in seconds, will be multiplied by HZ to get seconds to wait for a ping */
+static int timeout = WATCHDOG_TIMEOUT;	/* in seconds, multiplied by HZ to
+					   get seconds to wait for a ping */
 module_param(timeout, int, 0);
-MODULE_PARM_DESC(timeout, "Watchdog timeout in seconds. (1<=timeout<=3600, default=" __MODULE_STRING(WATCHDOG_TIMEOUT) ")");
+MODULE_PARM_DESC(timeout,
+	"Watchdog timeout in seconds. (1<=timeout<=3600, default="
+				__MODULE_STRING(WATCHDOG_TIMEOUT) ")");
 
 static int nowayout = WATCHDOG_NOWAYOUT;
 module_param(nowayout, int, 0);
-MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=" __MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
+MODULE_PARM_DESC(nowayout,
+	"Watchdog cannot be stopped once started (default="
+				__MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
 
 static void wdt_timer_ping(unsigned long);
 static DEFINE_TIMER(timer, wdt_timer_ping, 0, 0);
@@ -117,15 +126,14 @@ static void wdt_timer_ping(unsigned long data)
 	/* If we got a heartbeat pulse within the WDT_US_INTERVAL
 	 * we agree to ping the WDT
 	 */
-	if(time_before(jiffies, next_heartbeat))
-	{
+	if (time_before(jiffies, next_heartbeat)) {
 		/* Ping the WDT by reading from wdt_start */
 		inb_p(wdt_start);
 		/* Re-set the timer interval */
 		mod_timer(&timer, jiffies + WDT_INTERVAL);
-	} else {
-		printk(KERN_WARNING PFX "Heartbeat lost! Will not ping the watchdog\n");
-	}
+	} else
+		printk(KERN_WARNING PFX
+			"Heartbeat lost! Will not ping the watchdog\n");
 }
 
 /*
@@ -159,40 +167,40 @@ static void wdt_keepalive(void)
  * /dev/watchdog handling
  */
 
-static ssize_t fop_write(struct file * file, const char __user * buf, size_t count, loff_t * ppos)
+static ssize_t fop_write(struct file *file, const char __user *buf,
+						size_t count, loff_t *ppos)
 {
 	/* See if we got the magic character 'V' and reload the timer */
-	if(count)
-	{
-		if (!nowayout)
-		{
+	if (count) {
+		if (!nowayout) {
 			size_t ofs;
 
-			/* note: just in case someone wrote the magic character
-			 * five months ago... */
+			/* note: just in case someone wrote the
+			   magic character five months ago... */
 			wdt_expect_close = 0;
 
-			/* scan to see whether or not we got the magic character */
-			for(ofs = 0; ofs != count; ofs++)
-			{
+			/* scan to see whether or not we got the
+			   magic character */
+			for (ofs = 0; ofs != count; ofs++) {
 				char c;
-				if(get_user(c, buf+ofs))
+				if (get_user(c, buf + ofs))
 					return -EFAULT;
-				if(c == 'V')
+				if (c == 'V')
 					wdt_expect_close = 42;
 			}
 		}
 
-		/* Well, anyhow someone wrote to us, we should return that favour */
+		/* Well, anyhow someone wrote to us, we should
+		   return that favour */
 		wdt_keepalive();
 	}
 	return count;
 }
 
-static int fop_open(struct inode * inode, struct file * file)
+static int fop_open(struct inode *inode, struct file *file)
 {
 	/* Just in case we're already talking to someone... */
-	if(test_and_set_bit(0, &wdt_is_open))
+	if (test_and_set_bit(0, &wdt_is_open))
 		return -EBUSY;
 
 	if (nowayout)
@@ -203,78 +211,72 @@ static int fop_open(struct inode * inode, struct file * file)
 	return nonseekable_open(inode, file);
 }
 
-static int fop_close(struct inode * inode, struct file * file)
+static int fop_close(struct inode *inode, struct file *file)
 {
-	if(wdt_expect_close == 42)
+	if (wdt_expect_close == 42)
 		wdt_turnoff();
 	else {
 		del_timer(&timer);
-		printk(KERN_CRIT PFX "device file closed unexpectedly. Will not stop the WDT!\n");
+		printk(KERN_CRIT PFX
+		  "device file closed unexpectedly. Will not stop the WDT!\n");
 	}
 	clear_bit(0, &wdt_is_open);
 	wdt_expect_close = 0;
 	return 0;
 }
 
-static int fop_ioctl(struct inode *inode, struct file *file, unsigned int cmd,
-	unsigned long arg)
+static long fop_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
 {
 	void __user *argp = (void __user *)arg;
 	int __user *p = argp;
-	static struct watchdog_info ident=
-	{
-		.options = WDIOF_KEEPALIVEPING | WDIOF_SETTIMEOUT | WDIOF_MAGICCLOSE,
+	static const struct watchdog_info ident = {
+		.options = WDIOF_KEEPALIVEPING | WDIOF_SETTIMEOUT |
+							WDIOF_MAGICCLOSE,
 		.firmware_version = 1,
 		.identity = "SBC60xx",
 	};
 
-	switch(cmd)
+	switch (cmd) {
+	case WDIOC_GETSUPPORT:
+		return copy_to_user(argp, &ident, sizeof(ident)) ? -EFAULT : 0;
+	case WDIOC_GETSTATUS:
+	case WDIOC_GETBOOTSTATUS:
+		return put_user(0, p);
+	case WDIOC_SETOPTIONS:
 	{
-		default:
-			return -ENOTTY;
-		case WDIOC_GETSUPPORT:
-			return copy_to_user(argp, &ident, sizeof(ident))?-EFAULT:0;
-		case WDIOC_GETSTATUS:
-		case WDIOC_GETBOOTSTATUS:
-			return put_user(0, p);
-		case WDIOC_KEEPALIVE:
-			wdt_keepalive();
-			return 0;
-		case WDIOC_SETOPTIONS:
-		{
-			int new_options, retval = -EINVAL;
-
-			if(get_user(new_options, p))
-				return -EFAULT;
-
-			if(new_options & WDIOS_DISABLECARD) {
-				wdt_turnoff();
-				retval = 0;
-			}
-
-			if(new_options & WDIOS_ENABLECARD) {
-				wdt_startup();
-				retval = 0;
-			}
-
-			return retval;
+		int new_options, retval = -EINVAL;
+		if (get_user(new_options, p))
+			return -EFAULT;
+		if (new_options & WDIOS_DISABLECARD) {
+			wdt_turnoff();
+			retval = 0;
 		}
-		case WDIOC_SETTIMEOUT:
-		{
-			int new_timeout;
-
-			if(get_user(new_timeout, p))
-				return -EFAULT;
-
-			if(new_timeout < 1 || new_timeout > 3600) /* arbitrary upper limit */
-				return -EINVAL;
-
-			timeout = new_timeout;
-			wdt_keepalive();
-			/* Fall through */
+		if (new_options & WDIOS_ENABLECARD) {
+			wdt_startup();
+			retval = 0;
 		}
-		case WDIOC_GETTIMEOUT:
-			return put_user(timeout, p);
+		return retval;
+	}
+	case WDIOC_KEEPALIVE:
+		wdt_keepalive();
+		return 0;
+	case WDIOC_SETTIMEOUT:
+	{
+		int new_timeout;
+		if (get_user(new_timeout, p))
+			return -EFAULT;
+		/* arbitrary upper limit */
+		if (new_timeout < 1 || new_timeout > 3600)
+			return -EINVAL;
+
+		timeout = new_timeout;
+		wdt_keepalive();
+		/* Fall through */
+	}
+	case WDIOC_GETTIMEOUT:
+		return put_user(timeout, p);
+	default:
+		return -ENOTTY;
 	}
 }
 
@@ -284,7 +286,7 @@ static const struct file_operations wdt_fops = {
 	.write		= fop_write,
 	.open		= fop_open,
 	.release	= fop_close,
-	.ioctl		= fop_ioctl,
+	.unlocked_ioctl	= fop_ioctl,
 };
 
 static struct miscdevice wdt_miscdev = {
@@ -300,7 +302,7 @@ static struct miscdevice wdt_miscdev = {
 static int wdt_notify_sys(struct notifier_block *this, unsigned long code,
 	void *unused)
 {
-	if(code==SYS_DOWN || code==SYS_HALT)
+	if (code == SYS_DOWN || code == SYS_HALT)
 		wdt_turnoff();
 	return NOTIFY_DONE;
 }
@@ -310,8 +312,7 @@ static int wdt_notify_sys(struct notifier_block *this, unsigned long code,
  *	turn the timebomb registers off.
  */
 
-static struct notifier_block wdt_notifier=
-{
+static struct notifier_block wdt_notifier = {
 	.notifier_call = wdt_notify_sys,
 };
 
@@ -324,23 +325,22 @@ static void __exit sbc60xxwdt_unload(void)
 
 	unregister_reboot_notifier(&wdt_notifier);
 	if ((wdt_stop != 0x45) && (wdt_stop != wdt_start))
-		release_region(wdt_stop,1);
-	release_region(wdt_start,1);
+		release_region(wdt_stop, 1);
+	release_region(wdt_start, 1);
 }
 
 static int __init sbc60xxwdt_init(void)
 {
 	int rc = -EBUSY;
 
-	if(timeout < 1 || timeout > 3600) /* arbitrary upper limit */
-	{
+	if (timeout < 1 || timeout > 3600) { /* arbitrary upper limit */
 		timeout = WATCHDOG_TIMEOUT;
-		printk(KERN_INFO PFX "timeout value must be 1<=x<=3600, using %d\n",
-			timeout);
- 	}
+		printk(KERN_INFO PFX
+			"timeout value must be 1 <= x <= 3600, using %d\n",
+								timeout);
+	}
 
-	if (!request_region(wdt_start, 1, "SBC 60XX WDT"))
-	{
+	if (!request_region(wdt_start, 1, "SBC 60XX WDT")) {
 		printk(KERN_ERR PFX "I/O address 0x%04x already in use\n",
 			wdt_start);
 		rc = -EIO;
@@ -348,33 +348,30 @@ static int __init sbc60xxwdt_init(void)
 	}
 
 	/* We cannot reserve 0x45 - the kernel already has! */
-	if ((wdt_stop != 0x45) && (wdt_stop != wdt_start))
-	{
-		if (!request_region(wdt_stop, 1, "SBC 60XX WDT"))
-		{
-			printk(KERN_ERR PFX "I/O address 0x%04x already in use\n",
-				wdt_stop);
+	if (wdt_stop != 0x45 && wdt_stop != wdt_start) {
+		if (!request_region(wdt_stop, 1, "SBC 60XX WDT")) {
+			printk(KERN_ERR PFX
+				"I/O address 0x%04x already in use\n",
+							wdt_stop);
 			rc = -EIO;
 			goto err_out_region1;
 		}
 	}
 
 	rc = register_reboot_notifier(&wdt_notifier);
-	if (rc)
-	{
-		printk(KERN_ERR PFX "cannot register reboot notifier (err=%d)\n",
-			rc);
+	if (rc) {
+		printk(KERN_ERR PFX
+			"cannot register reboot notifier (err=%d)\n", rc);
 		goto err_out_region2;
 	}
 
 	rc = misc_register(&wdt_miscdev);
-	if (rc)
-	{
-		printk(KERN_ERR PFX "cannot register miscdev on minor=%d (err=%d)\n",
-			wdt_miscdev.minor, rc);
+	if (rc) {
+		printk(KERN_ERR PFX
+			"cannot register miscdev on minor=%d (err=%d)\n",
+						wdt_miscdev.minor, rc);
 		goto err_out_reboot;
 	}
-
 	printk(KERN_INFO PFX "WDT driver for 60XX single board computer initialised. timeout=%d sec (nowayout=%d)\n",
 		timeout, nowayout);
 
@@ -383,10 +380,10 @@ static int __init sbc60xxwdt_init(void)
 err_out_reboot:
 	unregister_reboot_notifier(&wdt_notifier);
 err_out_region2:
-	if ((wdt_stop != 0x45) && (wdt_stop != wdt_start))
-		release_region(wdt_stop,1);
+	if (wdt_stop != 0x45 && wdt_stop != wdt_start)
+		release_region(wdt_stop, 1);
 err_out_region1:
-	release_region(wdt_start,1);
+	release_region(wdt_start, 1);
 err_out:
 	return rc;
 }
diff --git a/drivers/watchdog/sbc7240_wdt.c b/drivers/watchdog/sbc7240_wdt.c
index 4c8cefbd8627..67ddeb1c830a 100644
--- a/drivers/watchdog/sbc7240_wdt.c
+++ b/drivers/watchdog/sbc7240_wdt.c
@@ -27,10 +27,10 @@
 #include <linux/reboot.h>
 #include <linux/types.h>
 #include <linux/watchdog.h>
+#include <linux/io.h>
+#include <linux/uaccess.h>
 #include <asm/atomic.h>
-#include <asm/io.h>
 #include <asm/system.h>
-#include <asm/uaccess.h>
 
 #define SBC7240_PREFIX "sbc7240_wdt: "
 
@@ -159,7 +159,7 @@ static int fop_close(struct inode *inode, struct file *file)
 	return 0;
 }
 
-static struct watchdog_info ident = {
+static const struct watchdog_info ident = {
 	.options = WDIOF_KEEPALIVEPING|
 		   WDIOF_SETTIMEOUT|
 		   WDIOF_MAGICCLOSE,
@@ -168,50 +168,50 @@ static struct watchdog_info ident = {
 };
 
 
-static int fop_ioctl(struct inode *inode, struct file *file, unsigned int cmd,
-		     unsigned long arg)
+static long fop_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
 {
 	switch (cmd) {
 	case WDIOC_GETSUPPORT:
-		return copy_to_user
-			((void __user *)arg, &ident, sizeof(ident))
-			 ? -EFAULT : 0;
+		return copy_to_user((void __user *)arg, &ident, sizeof(ident))
+						 ? -EFAULT : 0;
 	case WDIOC_GETSTATUS:
 	case WDIOC_GETBOOTSTATUS:
 		return put_user(0, (int __user *)arg);
-	case WDIOC_KEEPALIVE:
-		wdt_keepalive();
-		return 0;
-	case WDIOC_SETOPTIONS:{
-			int options;
-			int retval = -EINVAL;
+	case WDIOC_SETOPTIONS:
+	{
+		int options;
+		int retval = -EINVAL;
 
-			if (get_user(options, (int __user *)arg))
-				return -EFAULT;
+		if (get_user(options, (int __user *)arg))
+			return -EFAULT;
 
-			if (options & WDIOS_DISABLECARD) {
-				wdt_disable();
-				retval = 0;
-			}
-
-			if (options & WDIOS_ENABLECARD) {
-				wdt_enable();
-				retval = 0;
-			}
+		if (options & WDIOS_DISABLECARD) {
+			wdt_disable();
+			retval = 0;
+		}
 
-			return retval;
+		if (options & WDIOS_ENABLECARD) {
+			wdt_enable();
+			retval = 0;
 		}
-	case WDIOC_SETTIMEOUT:{
-			int new_timeout;
 
-			if (get_user(new_timeout, (int __user *)arg))
-				return -EFAULT;
+		return retval;
+	}
+	case WDIOC_KEEPALIVE:
+		wdt_keepalive();
+		return 0;
+	case WDIOC_SETTIMEOUT:
+	{
+		int new_timeout;
 
-			if (wdt_set_timeout(new_timeout))
-				return -EINVAL;
+		if (get_user(new_timeout, (int __user *)arg))
+			return -EFAULT;
 
-			/* Fall through */
-		}
+		if (wdt_set_timeout(new_timeout))
+			return -EINVAL;
+
+		/* Fall through */
+	}
 	case WDIOC_GETTIMEOUT:
 		return put_user(timeout, (int __user *)arg);
 	default:
@@ -225,7 +225,7 @@ static const struct file_operations wdt_fops = {
 	.write = fop_write,
 	.open = fop_open,
 	.release = fop_close,
-	.ioctl = fop_ioctl,
+	.unlocked_ioctl = fop_ioctl,
 };
 
 static struct miscdevice wdt_miscdev = {
diff --git a/drivers/watchdog/sbc8360.c b/drivers/watchdog/sbc8360.c
index 2ee2677f3648..fd83dd052d8c 100644
--- a/drivers/watchdog/sbc8360.c
+++ b/drivers/watchdog/sbc8360.c
@@ -48,13 +48,12 @@
 #include <linux/init.h>
 #include <linux/spinlock.h>
 #include <linux/moduleparam.h>
+#include <linux/io.h>
+#include <linux/uaccess.h>
 
-#include <asm/io.h>
-#include <asm/uaccess.h>
 #include <asm/system.h>
 
 static unsigned long sbc8360_is_open;
-static DEFINE_SPINLOCK(sbc8360_lock);
 static char expect_close;
 
 #define PFX "sbc8360: "
@@ -204,7 +203,8 @@ module_param(timeout, int, 0);
 MODULE_PARM_DESC(timeout, "Index into timeout table (0-63) (default=27 (60s))");
 module_param(nowayout, int, 0);
 MODULE_PARM_DESC(nowayout,
-		 "Watchdog cannot be stopped once started (default=" __MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
+		 "Watchdog cannot be stopped once started (default="
+				__MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
 
 /*
  *	Kernel methods.
@@ -231,9 +231,16 @@ static void sbc8360_ping(void)
 	outb(wd_margin, SBC8360_BASETIME);
 }
 
+/* stop watchdog */
+static void sbc8360_stop(void)
+{
+	/* De-activate the watchdog */
+	outb(0, SBC8360_ENABLE);
+}
+
 /* Userspace pings kernel driver, or requests clean close */
-static ssize_t sbc8360_write(struct file *file, const char __user * buf,
-			     size_t count, loff_t * ppos)
+static ssize_t sbc8360_write(struct file *file, const char __user *buf,
+			     size_t count, loff_t *ppos)
 {
 	if (count) {
 		if (!nowayout) {
@@ -257,16 +264,12 @@ static ssize_t sbc8360_write(struct file *file, const char __user * buf,
 
 static int sbc8360_open(struct inode *inode, struct file *file)
 {
-	spin_lock(&sbc8360_lock);
-	if (test_and_set_bit(0, &sbc8360_is_open)) {
-		spin_unlock(&sbc8360_lock);
+	if (test_and_set_bit(0, &sbc8360_is_open))
 		return -EBUSY;
-	}
 	if (nowayout)
 		__module_get(THIS_MODULE);
 
 	/* Activate and ping once to start the countdown */
-	spin_unlock(&sbc8360_lock);
 	sbc8360_activate();
 	sbc8360_ping();
 	return nonseekable_open(inode, file);
@@ -274,16 +277,14 @@ static int sbc8360_open(struct inode *inode, struct file *file)
 
 static int sbc8360_close(struct inode *inode, struct file *file)
 {
-	spin_lock(&sbc8360_lock);
 	if (expect_close == 42)
-		outb(0, SBC8360_ENABLE);
+		sbc8360_stop();
 	else
 		printk(KERN_CRIT PFX
-		       "SBC8360 device closed unexpectedly.  SBC8360 will not stop!\n");
+			"SBC8360 device closed unexpectedly.  SBC8360 will not stop!\n");
 
 	clear_bit(0, &sbc8360_is_open);
 	expect_close = 0;
-	spin_unlock(&sbc8360_lock);
 	return 0;
 }
 
@@ -294,10 +295,9 @@ static int sbc8360_close(struct inode *inode, struct file *file)
 static int sbc8360_notify_sys(struct notifier_block *this, unsigned long code,
 			      void *unused)
 {
-	if (code == SYS_DOWN || code == SYS_HALT) {
-		/* Disable the SBC8360 Watchdog */
-		outb(0, SBC8360_ENABLE);
-	}
+	if (code == SYS_DOWN || code == SYS_HALT)
+		sbc8360_stop();	/* Disable the SBC8360 Watchdog */
+
 	return NOTIFY_DONE;
 }
 
@@ -382,13 +382,13 @@ static int __init sbc8360_init(void)
 
 	return 0;
 
-      out_nomisc:
+out_nomisc:
 	unregister_reboot_notifier(&sbc8360_notifier);
-      out_noreboot:
+out_noreboot:
 	release_region(SBC8360_BASETIME, 1);
-      out_nobasetimereg:
+out_nobasetimereg:
 	release_region(SBC8360_ENABLE, 1);
-      out:
+out:
 	return res;
 }
 
diff --git a/drivers/watchdog/sbc_epx_c3.c b/drivers/watchdog/sbc_epx_c3.c
index 82cbd8809a69..e5e470ca7759 100644
--- a/drivers/watchdog/sbc_epx_c3.c
+++ b/drivers/watchdog/sbc_epx_c3.c
@@ -25,8 +25,8 @@
 #include <linux/reboot.h>
 #include <linux/init.h>
 #include <linux/ioport.h>
-#include <asm/uaccess.h>
-#include <asm/io.h>
+#include <linux/uaccess.h>
+#include <linux/io.h>
 
 #define PFX "epx_c3: "
 static int epx_c3_alive;
@@ -100,12 +100,12 @@ static ssize_t epx_c3_write(struct file *file, const char __user *data,
 	return len;
 }
 
-static int epx_c3_ioctl(struct inode *inode, struct file *file,
-			unsigned int cmd, unsigned long arg)
+static long epx_c3_ioctl(struct file *file, unsigned int cmd,
+						unsigned long arg)
 {
 	int options, retval = -EINVAL;
 	int __user *argp = (void __user *)arg;
-	static struct watchdog_info ident = {
+	static const struct watchdog_info ident = {
 		.options		= WDIOF_KEEPALIVEPING |
 					  WDIOF_MAGICCLOSE,
 		.firmware_version	= 0,
@@ -120,11 +120,6 @@ static int epx_c3_ioctl(struct inode *inode, struct file *file,
 	case WDIOC_GETSTATUS:
 	case WDIOC_GETBOOTSTATUS:
 		return put_user(0, argp);
-	case WDIOC_KEEPALIVE:
-		epx_c3_pet();
-		return 0;
-	case WDIOC_GETTIMEOUT:
-		return put_user(WATCHDOG_TIMEOUT, argp);
 	case WDIOC_SETOPTIONS:
 		if (get_user(options, argp))
 			return -EFAULT;
@@ -140,6 +135,11 @@ static int epx_c3_ioctl(struct inode *inode, struct file *file,
 		}
 
 		return retval;
+	case WDIOC_KEEPALIVE:
+		epx_c3_pet();
+		return 0;
+	case WDIOC_GETTIMEOUT:
+		return put_user(WATCHDOG_TIMEOUT, argp);
 	default:
 		return -ENOTTY;
 	}
@@ -158,7 +158,7 @@ static const struct file_operations epx_c3_fops = {
 	.owner		= THIS_MODULE,
 	.llseek		= no_llseek,
 	.write		= epx_c3_write,
-	.ioctl		= epx_c3_ioctl,
+	.unlocked_ioctl	= epx_c3_ioctl,
 	.open		= epx_c3_open,
 	.release	= epx_c3_release,
 };
diff --git a/drivers/watchdog/sc1200wdt.c b/drivers/watchdog/sc1200wdt.c
index 35cddff7020f..23da3ccd832a 100644
--- a/drivers/watchdog/sc1200wdt.c
+++ b/drivers/watchdog/sc1200wdt.c
@@ -15,14 +15,18 @@
  *
  *	Changelog:
  *	20020220 Zwane Mwaikambo	Code based on datasheet, no hardware.
- *	20020221 Zwane Mwaikambo	Cleanups as suggested by Jeff Garzik and Alan Cox.
+ *	20020221 Zwane Mwaikambo	Cleanups as suggested by Jeff Garzik
+ *					and Alan Cox.
  *	20020222 Zwane Mwaikambo	Added probing.
  *	20020225 Zwane Mwaikambo	Added ISAPNP support.
  *	20020412 Rob Radez		Broke out start/stop functions
- *		 <rob@osinvestor.com>	Return proper status instead of temperature warning
- *					Add WDIOC_GETBOOTSTATUS and WDIOC_SETOPTIONS ioctls
+ *		 <rob@osinvestor.com>	Return proper status instead of
+ *					temperature warning
+ *					Add WDIOC_GETBOOTSTATUS and
+ *					WDIOC_SETOPTIONS ioctls
  *					Fix CONFIG_WATCHDOG_NOWAYOUT
- *	20020530 Joel Becker		Add Matt Domsch's nowayout module option
+ *	20020530 Joel Becker		Add Matt Domsch's nowayout module
+ *					option
  *	20030116 Adam Belay		Updated to the latest pnp code
  *
  */
@@ -39,9 +43,8 @@
 #include <linux/pnp.h>
 #include <linux/fs.h>
 #include <linux/semaphore.h>
-
-#include <asm/io.h>
-#include <asm/uaccess.h>
+#include <linux/io.h>
+#include <linux/uaccess.h>
 
 #define SC1200_MODULE_VER	"build 20020303"
 #define SC1200_MODULE_NAME	"sc1200wdt"
@@ -72,7 +75,7 @@ static char banner[] __initdata = KERN_INFO PFX SC1200_MODULE_VER;
 static int timeout = 1;
 static int io = -1;
 static int io_len = 2;		/* for non plug and play */
-static struct semaphore open_sem;
+static unsigned long open_flag;
 static char expect_close;
 static DEFINE_SPINLOCK(sc1200wdt_lock);	/* io port access serialisation */
 
@@ -81,7 +84,8 @@ static int isapnp = 1;
 static struct pnp_dev *wdt_dev;
 
 module_param(isapnp, int, 0);
-MODULE_PARM_DESC(isapnp, "When set to 0 driver ISA PnP support will be disabled");
+MODULE_PARM_DESC(isapnp,
+	"When set to 0 driver ISA PnP support will be disabled");
 #endif
 
 module_param(io, int, 0);
@@ -91,26 +95,40 @@ MODULE_PARM_DESC(timeout, "range is 0-255 minutes, default is 1");
 
 static int nowayout = WATCHDOG_NOWAYOUT;
 module_param(nowayout, int, 0);
-MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=" __MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
+MODULE_PARM_DESC(nowayout,
+	"Watchdog cannot be stopped once started (default="
+				__MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
 
 
 
 /* Read from Data Register */
-static inline void sc1200wdt_read_data(unsigned char index, unsigned char *data)
+static inline void __sc1200wdt_read_data(unsigned char index,
+						unsigned char *data)
 {
-	spin_lock(&sc1200wdt_lock);
 	outb_p(index, PMIR);
 	*data = inb(PMDR);
-	spin_unlock(&sc1200wdt_lock);
 }
 
+static void sc1200wdt_read_data(unsigned char index, unsigned char *data)
+{
+	spin_lock(&sc1200wdt_lock);
+	__sc1200wdt_read_data(index, data);
+	spin_unlock(&sc1200wdt_lock);
+}
 
 /* Write to Data Register */
-static inline void sc1200wdt_write_data(unsigned char index, unsigned char data)
+static inline void __sc1200wdt_write_data(unsigned char index,
+						unsigned char data)
 {
-	spin_lock(&sc1200wdt_lock);
 	outb_p(index, PMIR);
 	outb(data, PMDR);
+}
+
+static inline void sc1200wdt_write_data(unsigned char index,
+						unsigned char data)
+{
+	spin_lock(&sc1200wdt_lock);
+	__sc1200wdt_write_data(index, data);
 	spin_unlock(&sc1200wdt_lock);
 }
 
@@ -118,22 +136,23 @@ static inline void sc1200wdt_write_data(unsigned char index, unsigned char data)
 static void sc1200wdt_start(void)
 {
 	unsigned char reg;
+	spin_lock(&sc1200wdt_lock);
 
-	sc1200wdt_read_data(WDCF, &reg);
+	__sc1200wdt_read_data(WDCF, &reg);
 	/* assert WDO when any of the following interrupts are triggered too */
 	reg |= (KBC_IRQ | MSE_IRQ | UART1_IRQ | UART2_IRQ);
-	sc1200wdt_write_data(WDCF, reg);
+	__sc1200wdt_write_data(WDCF, reg);
 	/* set the timeout and get the ball rolling */
-	sc1200wdt_write_data(WDTO, timeout);
-}
+	__sc1200wdt_write_data(WDTO, timeout);
 
+	spin_unlock(&sc1200wdt_lock);
+}
 
 static void sc1200wdt_stop(void)
 {
 	sc1200wdt_write_data(WDTO, 0);
 }
 
-
 /* This returns the status of the WDO signal, inactive high. */
 static inline int sc1200wdt_status(void)
 {
@@ -144,14 +163,13 @@ static inline int sc1200wdt_status(void)
 	 * KEEPALIVEPING which is a bit of a kludge because there's nothing
 	 * else for enabled/disabled status
 	 */
-	return (ret & 0x01) ? 0 : WDIOF_KEEPALIVEPING;	/* bits 1 - 7 are undefined */
+	return (ret & 0x01) ? 0 : WDIOF_KEEPALIVEPING;
 }
 
-
 static int sc1200wdt_open(struct inode *inode, struct file *file)
 {
 	/* allow one at a time */
-	if (down_trylock(&open_sem))
+	if (test_and_set_bit(0, &open_flag))
 		return -EBUSY;
 
 	if (timeout > MAX_TIMEOUT)
@@ -164,71 +182,70 @@ static int sc1200wdt_open(struct inode *inode, struct file *file)
 }
 
 
-static int sc1200wdt_ioctl(struct inode *inode, struct file *file, unsigned int cmd, unsigned long arg)
+static long sc1200wdt_ioctl(struct file *file, unsigned int cmd,
+						unsigned long arg)
 {
 	int new_timeout;
 	void __user *argp = (void __user *)arg;
 	int __user *p = argp;
-	static struct watchdog_info ident = {
-		.options = WDIOF_KEEPALIVEPING | WDIOF_SETTIMEOUT | WDIOF_MAGICCLOSE,
+	static const struct watchdog_info ident = {
+		.options = WDIOF_KEEPALIVEPING | WDIOF_SETTIMEOUT |
+							WDIOF_MAGICCLOSE,
 		.firmware_version = 0,
 		.identity = "PC87307/PC97307",
 	};
 
 	switch (cmd) {
-		default:
-			return -ENOTTY;
+	case WDIOC_GETSUPPORT:
+		if (copy_to_user(argp, &ident, sizeof ident))
+			return -EFAULT;
+		return 0;
 
-		case WDIOC_GETSUPPORT:
-			if (copy_to_user(argp, &ident, sizeof ident))
-				return -EFAULT;
-			return 0;
+	case WDIOC_GETSTATUS:
+		return put_user(sc1200wdt_status(), p);
 
-		case WDIOC_GETSTATUS:
-			return put_user(sc1200wdt_status(), p);
+	case WDIOC_GETBOOTSTATUS:
+		return put_user(0, p);
 
-		case WDIOC_GETBOOTSTATUS:
-			return put_user(0, p);
+	case WDIOC_SETOPTIONS:
+	{
+		int options, retval = -EINVAL;
 
-		case WDIOC_KEEPALIVE:
-			sc1200wdt_write_data(WDTO, timeout);
-			return 0;
+		if (get_user(options, p))
+			return -EFAULT;
 
-		case WDIOC_SETTIMEOUT:
-			if (get_user(new_timeout, p))
-				return -EFAULT;
-
-			/* the API states this is given in secs */
-			new_timeout /= 60;
-			if (new_timeout < 0 || new_timeout > MAX_TIMEOUT)
-				return -EINVAL;
-
-			timeout = new_timeout;
-			sc1200wdt_write_data(WDTO, timeout);
-			/* fall through and return the new timeout */
-
-		case WDIOC_GETTIMEOUT:
-			return put_user(timeout * 60, p);
-
-		case WDIOC_SETOPTIONS:
-		{
-			int options, retval = -EINVAL;
+		if (options & WDIOS_DISABLECARD) {
+			sc1200wdt_stop();
+			retval = 0;
+		}
 
-			if (get_user(options, p))
-				return -EFAULT;
+		if (options & WDIOS_ENABLECARD) {
+			sc1200wdt_start();
+			retval = 0;
+		}
 
-			if (options & WDIOS_DISABLECARD) {
-				sc1200wdt_stop();
-				retval = 0;
-			}
+		return retval;
+	}
+	case WDIOC_KEEPALIVE:
+		sc1200wdt_write_data(WDTO, timeout);
+		return 0;
+
+	case WDIOC_SETTIMEOUT:
+		if (get_user(new_timeout, p))
+			return -EFAULT;
+		/* the API states this is given in secs */
+		new_timeout /= 60;
+		if (new_timeout < 0 || new_timeout > MAX_TIMEOUT)
+			return -EINVAL;
+		timeout = new_timeout;
+		sc1200wdt_write_data(WDTO, timeout);
+		/* fall through and return the new timeout */
 
-			if (options & WDIOS_ENABLECARD) {
-				sc1200wdt_start();
-				retval = 0;
-			}
+	case WDIOC_GETTIMEOUT:
+		return put_user(timeout * 60, p);
 
-			return retval;
-		}
+	default:
+		return -ENOTTY;
 	}
 }
 
@@ -240,16 +257,18 @@ static int sc1200wdt_release(struct inode *inode, struct file *file)
 		printk(KERN_INFO PFX "Watchdog disabled\n");
 	} else {
 		sc1200wdt_write_data(WDTO, timeout);
-		printk(KERN_CRIT PFX "Unexpected close!, timeout = %d min(s)\n", timeout);
+		printk(KERN_CRIT PFX
+			"Unexpected close!, timeout = %d min(s)\n", timeout);
 	}
-	up(&open_sem);
+	clear_bit(0, &open_flag);
 	expect_close = 0;
 
 	return 0;
 }
 
 
-static ssize_t sc1200wdt_write(struct file *file, const char __user *data, size_t len, loff_t *ppos)
+static ssize_t sc1200wdt_write(struct file *file, const char __user *data,
+						size_t len, loff_t *ppos)
 {
 	if (len) {
 		if (!nowayout) {
@@ -260,7 +279,7 @@ static ssize_t sc1200wdt_write(struct file *file, const char __user *data, size_
 			for (i = 0; i != len; i++) {
 				char c;
 
-				if (get_user(c, data+i))
+				if (get_user(c, data + i))
 					return -EFAULT;
 				if (c == 'V')
 					expect_close = 42;
@@ -275,7 +294,8 @@ static ssize_t sc1200wdt_write(struct file *file, const char __user *data, size_
 }
 
 
-static int sc1200wdt_notify_sys(struct notifier_block *this, unsigned long code, void *unused)
+static int sc1200wdt_notify_sys(struct notifier_block *this,
+					unsigned long code, void *unused)
 {
 	if (code == SYS_DOWN || code == SYS_HALT)
 		sc1200wdt_stop();
@@ -284,23 +304,20 @@ static int sc1200wdt_notify_sys(struct notifier_block *this, unsigned long code,
 }
 
 
-static struct notifier_block sc1200wdt_notifier =
-{
+static struct notifier_block sc1200wdt_notifier = {
 	.notifier_call =	sc1200wdt_notify_sys,
 };
 
-static const struct file_operations sc1200wdt_fops =
-{
+static const struct file_operations sc1200wdt_fops = {
 	.owner		= THIS_MODULE,
 	.llseek		= no_llseek,
 	.write		= sc1200wdt_write,
-	.ioctl		= sc1200wdt_ioctl,
+	.unlocked_ioctl = sc1200wdt_ioctl,
 	.open		= sc1200wdt_open,
 	.release	= sc1200wdt_release,
 };
 
-static struct miscdevice sc1200wdt_miscdev =
-{
+static struct miscdevice sc1200wdt_miscdev = {
 	.minor		= WATCHDOG_MINOR,
 	.name		= "watchdog",
 	.fops		= &sc1200wdt_fops,
@@ -312,14 +329,14 @@ static int __init sc1200wdt_probe(void)
 	/* The probe works by reading the PMC3 register's default value of 0x0e
 	 * there is one caveat, if the device disables the parallel port or any
 	 * of the UARTs we won't be able to detect it.
-	 * Nb. This could be done with accuracy by reading the SID registers, but
-	 * we don't have access to those io regions.
+	 * NB. This could be done with accuracy by reading the SID registers,
+	 * but we don't have access to those io regions.
 	 */
 
 	unsigned char reg;
 
 	sc1200wdt_read_data(PMC3, &reg);
-	reg &= 0x0f;				/* we don't want the UART busy bits */
+	reg &= 0x0f;		/* we don't want the UART busy bits */
 	return (reg == 0x0e) ? 0 : -ENODEV;
 }
 
@@ -332,7 +349,8 @@ static struct pnp_device_id scl200wdt_pnp_devices[] = {
 	{.id = ""},
 };
 
-static int scl200wdt_pnp_probe(struct pnp_dev * dev, const struct pnp_device_id *dev_id)
+static int scl200wdt_pnp_probe(struct pnp_dev *dev,
+					const struct pnp_device_id *dev_id)
 {
 	/* this driver only supports one card at a time */
 	if (wdt_dev || !isapnp)
@@ -347,13 +365,14 @@ static int scl200wdt_pnp_probe(struct pnp_dev * dev, const struct pnp_device_id
 		return -EBUSY;
 	}
 
-	printk(KERN_INFO "scl200wdt: PnP device found at io port %#x/%d\n", io, io_len);
+	printk(KERN_INFO "scl200wdt: PnP device found at io port %#x/%d\n",
+								io, io_len);
 	return 0;
 }
 
-static void scl200wdt_pnp_remove(struct pnp_dev * dev)
+static void scl200wdt_pnp_remove(struct pnp_dev *dev)
 {
-	if (wdt_dev){
+	if (wdt_dev) {
 		release_region(io, io_len);
 		wdt_dev = NULL;
 	}
@@ -375,8 +394,6 @@ static int __init sc1200wdt_init(void)
 
 	printk("%s\n", banner);
 
-	sema_init(&open_sem, 1);
-
 #if defined CONFIG_PNP
 	if (isapnp) {
 		ret = pnp_register_driver(&scl200wdt_pnp_driver);
@@ -410,13 +427,16 @@ static int __init sc1200wdt_init(void)
 
 	ret = register_reboot_notifier(&sc1200wdt_notifier);
 	if (ret) {
-		printk(KERN_ERR PFX "Unable to register reboot notifier err = %d\n", ret);
+		printk(KERN_ERR PFX
+			"Unable to register reboot notifier err = %d\n", ret);
 		goto out_io;
 	}
 
 	ret = misc_register(&sc1200wdt_miscdev);
 	if (ret) {
-		printk(KERN_ERR PFX "Unable to register miscdev on minor %d\n", WATCHDOG_MINOR);
+		printk(KERN_ERR PFX
+			"Unable to register miscdev on minor %d\n",
+							WATCHDOG_MINOR);
 		goto out_rbt;
 	}
 
@@ -446,7 +466,7 @@ static void __exit sc1200wdt_exit(void)
 	unregister_reboot_notifier(&sc1200wdt_notifier);
 
 #if defined CONFIG_PNP
-	if(isapnp)
+	if (isapnp)
 		pnp_unregister_driver(&scl200wdt_pnp_driver);
 	else
 #endif
diff --git a/drivers/watchdog/sc520_wdt.c b/drivers/watchdog/sc520_wdt.c
index 2847324a2be2..a2b6c1067ec5 100644
--- a/drivers/watchdog/sc520_wdt.c
+++ b/drivers/watchdog/sc520_wdt.c
@@ -64,9 +64,9 @@
 #include <linux/reboot.h>
 #include <linux/init.h>
 #include <linux/jiffies.h>
+#include <linux/io.h>
+#include <linux/uaccess.h>
 
-#include <asm/io.h>
-#include <asm/uaccess.h>
 #include <asm/system.h>
 
 #define OUR_NAME "sc520_wdt"
@@ -91,13 +91,18 @@
  */
 
 #define WATCHDOG_TIMEOUT 30		/* 30 sec default timeout */
-static int timeout = WATCHDOG_TIMEOUT;	/* in seconds, will be multiplied by HZ to get seconds to wait for a ping */
+/* in seconds, will be multiplied by HZ to get seconds to wait for a ping */
+static int timeout = WATCHDOG_TIMEOUT;
 module_param(timeout, int, 0);
-MODULE_PARM_DESC(timeout, "Watchdog timeout in seconds. (1<=timeout<=3600, default=" __MODULE_STRING(WATCHDOG_TIMEOUT) ")");
+MODULE_PARM_DESC(timeout,
+	"Watchdog timeout in seconds. (1 <= timeout <= 3600, default="
+				__MODULE_STRING(WATCHDOG_TIMEOUT) ")");
 
 static int nowayout = WATCHDOG_NOWAYOUT;
 module_param(nowayout, int, 0);
-MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=" __MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
+MODULE_PARM_DESC(nowayout,
+		"Watchdog cannot be stopped once started (default="
+				__MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
 
 /*
  * AMD Elan SC520 - Watchdog Timer Registers
@@ -136,8 +141,7 @@ static void wdt_timer_ping(unsigned long data)
 	/* If we got a heartbeat pulse within the WDT_US_INTERVAL
 	 * we agree to ping the WDT
 	 */
-	if(time_before(jiffies, next_heartbeat))
-	{
+	if (time_before(jiffies, next_heartbeat)) {
 		/* Ping the WDT */
 		spin_lock(&wdt_spinlock);
 		writew(0xAAAA, wdtmrctl);
@@ -146,9 +150,9 @@ static void wdt_timer_ping(unsigned long data)
 
 		/* Re-set the timer interval */
 		mod_timer(&timer, jiffies + WDT_INTERVAL);
-	} else {
-		printk(KERN_WARNING PFX "Heartbeat lost! Will not ping the watchdog\n");
-	}
+	} else
+		printk(KERN_WARNING PFX
+			"Heartbeat lost! Will not ping the watchdog\n");
 }
 
 /*
@@ -162,7 +166,7 @@ static void wdt_config(int writeval)
 
 	/* buy some time (ping) */
 	spin_lock_irqsave(&wdt_spinlock, flags);
-	dummy=readw(wdtmrctl);	/* ensure write synchronization */
+	dummy = readw(wdtmrctl);	/* ensure write synchronization */
 	writew(0xAAAA, wdtmrctl);
 	writew(0x5555, wdtmrctl);
 	/* unlock WDT = make WDT configuration register writable one time */
@@ -219,10 +223,11 @@ static int wdt_set_heartbeat(int t)
  *	/dev/watchdog handling
  */
 
-static ssize_t fop_write(struct file * file, const char __user * buf, size_t count, loff_t * ppos)
+static ssize_t fop_write(struct file *file, const char __user *buf,
+						size_t count, loff_t *ppos)
 {
 	/* See if we got the magic character 'V' and reload the timer */
-	if(count) {
+	if (count) {
 		if (!nowayout) {
 			size_t ofs;
 
@@ -231,25 +236,26 @@ static ssize_t fop_write(struct file * file, const char __user * buf, size_t cou
 			wdt_expect_close = 0;
 
 			/* now scan */
-			for(ofs = 0; ofs != count; ofs++) {
+			for (ofs = 0; ofs != count; ofs++) {
 				char c;
 				if (get_user(c, buf + ofs))
 					return -EFAULT;
-				if(c == 'V')
+				if (c == 'V')
 					wdt_expect_close = 42;
 			}
 		}
 
-		/* Well, anyhow someone wrote to us, we should return that favour */
+		/* Well, anyhow someone wrote to us, we should
+		   return that favour */
 		wdt_keepalive();
 	}
 	return count;
 }
 
-static int fop_open(struct inode * inode, struct file * file)
+static int fop_open(struct inode *inode, struct file *file)
 {
 	/* Just in case we're already talking to someone... */
-	if(test_and_set_bit(0, &wdt_is_open))
+	if (test_and_set_bit(0, &wdt_is_open))
 		return -EBUSY;
 	if (nowayout)
 		__module_get(THIS_MODULE);
@@ -259,12 +265,13 @@ static int fop_open(struct inode * inode, struct file * file)
 	return nonseekable_open(inode, file);
 }
 
-static int fop_close(struct inode * inode, struct file * file)
+static int fop_close(struct inode *inode, struct file *file)
 {
-	if(wdt_expect_close == 42) {
+	if (wdt_expect_close == 42)
 		wdt_turnoff();
-	} else {
-		printk(KERN_CRIT PFX "Unexpected close, not stopping watchdog!\n");
+	else {
+		printk(KERN_CRIT PFX
+			"Unexpected close, not stopping watchdog!\n");
 		wdt_keepalive();
 	}
 	clear_bit(0, &wdt_is_open);
@@ -272,63 +279,62 @@ static int fop_close(struct inode * inode, struct file * file)
 	return 0;
 }
 
-static int fop_ioctl(struct inode *inode, struct file *file, unsigned int cmd,
-	unsigned long arg)
+static long fop_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
 {
 	void __user *argp = (void __user *)arg;
 	int __user *p = argp;
-	static struct watchdog_info ident = {
-		.options = WDIOF_KEEPALIVEPING | WDIOF_SETTIMEOUT | WDIOF_MAGICCLOSE,
+	static const struct watchdog_info ident = {
+		.options = WDIOF_KEEPALIVEPING | WDIOF_SETTIMEOUT
+							| WDIOF_MAGICCLOSE,
 		.firmware_version = 1,
 		.identity = "SC520",
 	};
 
-	switch(cmd)
+	switch (cmd) {
+	case WDIOC_GETSUPPORT:
+		return copy_to_user(argp, &ident, sizeof(ident)) ? -EFAULT : 0;
+	case WDIOC_GETSTATUS:
+	case WDIOC_GETBOOTSTATUS:
+		return put_user(0, p);
+	case WDIOC_SETOPTIONS:
 	{
-		default:
-			return -ENOTTY;
-		case WDIOC_GETSUPPORT:
-			return copy_to_user(argp, &ident, sizeof(ident))?-EFAULT:0;
-		case WDIOC_GETSTATUS:
-		case WDIOC_GETBOOTSTATUS:
-			return put_user(0, p);
-		case WDIOC_KEEPALIVE:
-			wdt_keepalive();
-			return 0;
-		case WDIOC_SETOPTIONS:
-		{
-			int new_options, retval = -EINVAL;
-
-			if(get_user(new_options, p))
-				return -EFAULT;
-
-			if(new_options & WDIOS_DISABLECARD) {
-				wdt_turnoff();
-				retval = 0;
-			}
+		int new_options, retval = -EINVAL;
 
-			if(new_options & WDIOS_ENABLECARD) {
-				wdt_startup();
-				retval = 0;
-			}
+		if (get_user(new_options, p))
+			return -EFAULT;
 
-			return retval;
+		if (new_options & WDIOS_DISABLECARD) {
+			wdt_turnoff();
+			retval = 0;
 		}
-		case WDIOC_SETTIMEOUT:
-		{
-			int new_timeout;
 
-			if(get_user(new_timeout, p))
-				return -EFAULT;
+		if (new_options & WDIOS_ENABLECARD) {
+			wdt_startup();
+			retval = 0;
+		}
 
-			if(wdt_set_heartbeat(new_timeout))
-				return -EINVAL;
+		return retval;
+	}
+	case WDIOC_KEEPALIVE:
+		wdt_keepalive();
+		return 0;
+	case WDIOC_SETTIMEOUT:
+	{
+		int new_timeout;
 
-			wdt_keepalive();
-			/* Fall through */
-		}
-		case WDIOC_GETTIMEOUT:
-			return put_user(timeout, p);
+		if (get_user(new_timeout, p))
+			return -EFAULT;
+
+		if (wdt_set_heartbeat(new_timeout))
+			return -EINVAL;
+
+		wdt_keepalive();
+		/* Fall through */
+	}
+	case WDIOC_GETTIMEOUT:
+		return put_user(timeout, p);
+	default:
+		return -ENOTTY;
 	}
 }
 
@@ -338,7 +344,7 @@ static const struct file_operations wdt_fops = {
 	.write		= fop_write,
 	.open		= fop_open,
 	.release	= fop_close,
-	.ioctl		= fop_ioctl,
+	.unlocked_ioctl	= fop_ioctl,
 };
 
 static struct miscdevice wdt_miscdev = {
@@ -354,7 +360,7 @@ static struct miscdevice wdt_miscdev = {
 static int wdt_notify_sys(struct notifier_block *this, unsigned long code,
 	void *unused)
 {
-	if(code==SYS_DOWN || code==SYS_HALT)
+	if (code == SYS_DOWN || code == SYS_HALT)
 		wdt_turnoff();
 	return NOTIFY_DONE;
 }
@@ -383,11 +389,13 @@ static int __init sc520_wdt_init(void)
 {
 	int rc = -EBUSY;
 
-	/* Check that the timeout value is within it's range ; if not reset to the default */
+	/* Check that the timeout value is within it's range ;
+	   if not reset to the default */
 	if (wdt_set_heartbeat(timeout)) {
 		wdt_set_heartbeat(WATCHDOG_TIMEOUT);
-		printk(KERN_INFO PFX "timeout value must be 1<=timeout<=3600, using %d\n",
-			WATCHDOG_TIMEOUT);
+		printk(KERN_INFO PFX
+		    "timeout value must be 1 <= timeout <= 3600, using %d\n",
+							WATCHDOG_TIMEOUT);
 	}
 
 	wdtmrctl = ioremap((unsigned long)(MMCR_BASE + OFFS_WDTMRCTL), 2);
@@ -399,20 +407,22 @@ static int __init sc520_wdt_init(void)
 
 	rc = register_reboot_notifier(&wdt_notifier);
 	if (rc) {
-		printk(KERN_ERR PFX "cannot register reboot notifier (err=%d)\n",
-			rc);
+		printk(KERN_ERR PFX
+			"cannot register reboot notifier (err=%d)\n", rc);
 		goto err_out_ioremap;
 	}
 
 	rc = misc_register(&wdt_miscdev);
 	if (rc) {
-		printk(KERN_ERR PFX "cannot register miscdev on minor=%d (err=%d)\n",
-			WATCHDOG_MINOR, rc);
+		printk(KERN_ERR PFX
+			"cannot register miscdev on minor=%d (err=%d)\n",
+							WATCHDOG_MINOR, rc);
 		goto err_out_notifier;
 	}
 
-	printk(KERN_INFO PFX "WDT driver for SC520 initialised. timeout=%d sec (nowayout=%d)\n",
-		timeout,nowayout);
+	printk(KERN_INFO PFX
+	   "WDT driver for SC520 initialised. timeout=%d sec (nowayout=%d)\n",
+							timeout, nowayout);
 
 	return 0;
 
diff --git a/drivers/watchdog/scx200_wdt.c b/drivers/watchdog/scx200_wdt.c
index d55882bca319..9e19a10a5bb9 100644
--- a/drivers/watchdog/scx200_wdt.c
+++ b/drivers/watchdog/scx200_wdt.c
@@ -27,9 +27,8 @@
 #include <linux/fs.h>
 #include <linux/ioport.h>
 #include <linux/scx200.h>
-
-#include <asm/uaccess.h>
-#include <asm/io.h>
+#include <linux/uaccess.h>
+#include <linux/io.h>
 
 #define NAME "scx200_wdt"
 
@@ -47,8 +46,9 @@ module_param(nowayout, int, 0);
 MODULE_PARM_DESC(nowayout, "Disable watchdog shutdown on close");
 
 static u16 wdto_restart;
-static struct semaphore open_semaphore;
 static char expect_close;
+static unsigned long open_lock;
+static DEFINE_SPINLOCK(scx_lock);
 
 /* Bits of the WDCNFG register */
 #define W_ENABLE 0x00fa		/* Enable watchdog */
@@ -59,7 +59,9 @@ static char expect_close;
 
 static void scx200_wdt_ping(void)
 {
+	spin_lock(&scx_lock);
 	outw(wdto_restart, scx200_cb_base + SCx200_WDT_WDTO);
+	spin_unlock(&scx_lock);
 }
 
 static void scx200_wdt_update_margin(void)
@@ -73,9 +75,11 @@ static void scx200_wdt_enable(void)
 	printk(KERN_DEBUG NAME ": enabling watchdog timer, wdto_restart = %d\n",
 	       wdto_restart);
 
+	spin_lock(&scx_lock);
 	outw(0, scx200_cb_base + SCx200_WDT_WDTO);
 	outb(SCx200_WDT_WDSTS_WDOVF, scx200_cb_base + SCx200_WDT_WDSTS);
 	outw(W_ENABLE, scx200_cb_base + SCx200_WDT_WDCNFG);
+	spin_unlock(&scx_lock);
 
 	scx200_wdt_ping();
 }
@@ -84,15 +88,17 @@ static void scx200_wdt_disable(void)
 {
 	printk(KERN_DEBUG NAME ": disabling watchdog timer\n");
 
+	spin_lock(&scx_lock);
 	outw(0, scx200_cb_base + SCx200_WDT_WDTO);
 	outb(SCx200_WDT_WDSTS_WDOVF, scx200_cb_base + SCx200_WDT_WDSTS);
 	outw(W_DISABLE, scx200_cb_base + SCx200_WDT_WDCNFG);
+	spin_unlock(&scx_lock);
 }
 
 static int scx200_wdt_open(struct inode *inode, struct file *file)
 {
 	/* only allow one at a time */
-	if (down_trylock(&open_semaphore))
+	if (test_and_set_bit(0, &open_lock))
 		return -EBUSY;
 	scx200_wdt_enable();
 
@@ -101,13 +107,12 @@ static int scx200_wdt_open(struct inode *inode, struct file *file)
 
 static int scx200_wdt_release(struct inode *inode, struct file *file)
 {
-	if (expect_close != 42) {
+	if (expect_close != 42)
 		printk(KERN_WARNING NAME ": watchdog device closed unexpectedly, will not disable the watchdog timer\n");
-	} else if (!nowayout) {
+	else if (!nowayout)
 		scx200_wdt_disable();
-	}
 	expect_close = 0;
-	up(&open_semaphore);
+	clear_bit(0, &open_lock);
 
 	return 0;
 }
@@ -122,8 +127,7 @@ static int scx200_wdt_notify_sys(struct notifier_block *this,
 	return NOTIFY_DONE;
 }
 
-static struct notifier_block scx200_wdt_notifier =
-{
+static struct notifier_block scx200_wdt_notifier = {
 	.notifier_call = scx200_wdt_notify_sys,
 };
 
@@ -131,8 +135,7 @@ static ssize_t scx200_wdt_write(struct file *file, const char __user *data,
 				     size_t len, loff_t *ppos)
 {
 	/* check for a magic close character */
-	if (len)
-	{
+	if (len) {
 		size_t i;
 
 		scx200_wdt_ping();
@@ -140,7 +143,7 @@ static ssize_t scx200_wdt_write(struct file *file, const char __user *data,
 		expect_close = 0;
 		for (i = 0; i < len; ++i) {
 			char c;
-			if (get_user(c, data+i))
+			if (get_user(c, data + i))
 				return -EFAULT;
 			if (c == 'V')
 				expect_close = 42;
@@ -152,23 +155,21 @@ static ssize_t scx200_wdt_write(struct file *file, const char __user *data,
 	return 0;
 }
 
-static int scx200_wdt_ioctl(struct inode *inode, struct file *file,
-	unsigned int cmd, unsigned long arg)
+static long scx200_wdt_ioctl(struct file *file, unsigned int cmd,
+							unsigned long arg)
 {
 	void __user *argp = (void __user *)arg;
 	int __user *p = argp;
-	static struct watchdog_info ident = {
+	static const struct watchdog_info ident = {
 		.identity = "NatSemi SCx200 Watchdog",
 		.firmware_version = 1,
-		.options = (WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING),
+		.options = WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING,
 	};
 	int new_margin;
 
 	switch (cmd) {
-	default:
-		return -ENOTTY;
 	case WDIOC_GETSUPPORT:
-		if(copy_to_user(argp, &ident, sizeof(ident)))
+		if (copy_to_user(argp, &ident, sizeof(ident)))
 			return -EFAULT;
 		return 0;
 	case WDIOC_GETSTATUS:
@@ -191,22 +192,24 @@ static int scx200_wdt_ioctl(struct inode *inode, struct file *file,
 		if (put_user(margin, p))
 			return -EFAULT;
 		return 0;
+	default:
+		return -ENOTTY;
 	}
 }
 
 static const struct file_operations scx200_wdt_fops = {
-	.owner	 = THIS_MODULE,
-	.llseek	 = no_llseek,
-	.write   = scx200_wdt_write,
-	.ioctl   = scx200_wdt_ioctl,
-	.open    = scx200_wdt_open,
+	.owner = THIS_MODULE,
+	.llseek = no_llseek,
+	.write = scx200_wdt_write,
+	.unlocked_ioctl = scx200_wdt_ioctl,
+	.open = scx200_wdt_open,
 	.release = scx200_wdt_release,
 };
 
 static struct miscdevice scx200_wdt_miscdev = {
 	.minor = WATCHDOG_MINOR,
-	.name  = "watchdog",
-	.fops  = &scx200_wdt_fops,
+	.name = "watchdog",
+	.fops = &scx200_wdt_fops,
 };
 
 static int __init scx200_wdt_init(void)
@@ -229,8 +232,6 @@ static int __init scx200_wdt_init(void)
 	scx200_wdt_update_margin();
 	scx200_wdt_disable();
 
-	sema_init(&open_semaphore, 1);
-
 	r = register_reboot_notifier(&scx200_wdt_notifier);
 	if (r) {
 		printk(KERN_ERR NAME ": unable to register reboot notifier");
@@ -263,7 +264,7 @@ module_exit(scx200_wdt_cleanup);
 
 /*
     Local variables:
-        compile-command: "make -k -C ../.. SUBDIRS=drivers/char modules"
-        c-basic-offset: 8
+	compile-command: "make -k -C ../.. SUBDIRS=drivers/char modules"
+	c-basic-offset: 8
     End:
 */
diff --git a/drivers/watchdog/shwdt.c b/drivers/watchdog/shwdt.c
index 1277f7e9cc54..cdc7138be301 100644
--- a/drivers/watchdog/shwdt.c
+++ b/drivers/watchdog/shwdt.c
@@ -28,8 +28,8 @@
 #include <linux/ioport.h>
 #include <linux/fs.h>
 #include <linux/mm.h>
-#include <asm/io.h>
-#include <asm/uaccess.h>
+#include <linux/io.h>
+#include <linux/uaccess.h>
 #include <asm/watchdog.h>
 
 #define PFX "shwdt: "
@@ -68,10 +68,11 @@ static int clock_division_ratio = WTCSR_CKS_4096;
 static void sh_wdt_ping(unsigned long data);
 
 static unsigned long shwdt_is_open;
-static struct watchdog_info sh_wdt_info;
+static const struct watchdog_info sh_wdt_info;
 static char shwdt_expect_close;
 static DEFINE_TIMER(timer, sh_wdt_ping, 0, 0);
 static unsigned long next_heartbeat;
+static DEFINE_SPINLOCK(shwdt_lock);
 
 #define WATCHDOG_HEARTBEAT 30			/* 30 sec default heartbeat */
 static int heartbeat = WATCHDOG_HEARTBEAT;	/* in seconds */
@@ -86,6 +87,9 @@ static int nowayout = WATCHDOG_NOWAYOUT;
 static void sh_wdt_start(void)
 {
 	__u8 csr;
+	unsigned long flags;
+
+	spin_lock_irqsave(&shwdt_lock, flags);
 
 	next_heartbeat = jiffies + (heartbeat * HZ);
 	mod_timer(&timer, next_ping_period(clock_division_ratio));
@@ -123,6 +127,7 @@ static void sh_wdt_start(void)
 	csr &= ~RSTCSR_RSTS;
 	sh_wdt_write_rstcsr(csr);
 #endif
+	spin_unlock_irqrestore(&shwdt_lock, flags);
 }
 
 /**
@@ -132,12 +137,16 @@ static void sh_wdt_start(void)
 static void sh_wdt_stop(void)
 {
 	__u8 csr;
+	unsigned long flags;
+
+	spin_lock_irqsave(&shwdt_lock, flags);
 
 	del_timer(&timer);
 
 	csr = sh_wdt_read_csr();
 	csr &= ~WTCSR_TME;
 	sh_wdt_write_csr(csr);
+	spin_unlock_irqrestore(&shwdt_lock, flags);
 }
 
 /**
@@ -146,7 +155,11 @@ static void sh_wdt_stop(void)
  */
 static inline void sh_wdt_keepalive(void)
 {
+	unsigned long flags;
+
+	spin_lock_irqsave(&shwdt_lock, flags);
 	next_heartbeat = jiffies + (heartbeat * HZ);
+	spin_unlock_irqrestore(&shwdt_lock, flags);
 }
 
 /**
@@ -155,10 +168,14 @@ static inline void sh_wdt_keepalive(void)
  */
 static int sh_wdt_set_heartbeat(int t)
 {
-	if (unlikely((t < 1) || (t > 3600))) /* arbitrary upper limit */
+	unsigned long flags;
+
+	if (unlikely(t < 1 || t > 3600)) /* arbitrary upper limit */
 		return -EINVAL;
 
+	spin_lock_irqsave(&shwdt_lock, flags);
 	heartbeat = t;
+	spin_unlock_irqrestore(&shwdt_lock, flags);
 	return 0;
 }
 
@@ -170,6 +187,9 @@ static int sh_wdt_set_heartbeat(int t)
  */
 static void sh_wdt_ping(unsigned long data)
 {
+	unsigned long flags;
+
+	spin_lock_irqsave(&shwdt_lock, flags);
 	if (time_before(jiffies, next_heartbeat)) {
 		__u8 csr;
 
@@ -183,6 +203,7 @@ static void sh_wdt_ping(unsigned long data)
 	} else
 		printk(KERN_WARNING PFX "Heartbeat lost! Will not ping "
 		       "the watchdog\n");
+	spin_unlock_irqrestore(&shwdt_lock, flags);
 }
 
 /**
@@ -310,7 +331,6 @@ static int sh_wdt_mmap(struct file *file, struct vm_area_struct *vma)
 
 /**
  * 	sh_wdt_ioctl - Query Device
- * 	@inode: inode of device
  * 	@file: file handle of device
  * 	@cmd: watchdog command
  * 	@arg: argument
@@ -318,53 +338,51 @@ static int sh_wdt_mmap(struct file *file, struct vm_area_struct *vma)
  * 	Query basic information from the device or ping it, as outlined by the
  * 	watchdog API.
  */
-static int sh_wdt_ioctl(struct inode *inode, struct file *file,
-			unsigned int cmd, unsigned long arg)
+static long sh_wdt_ioctl(struct file *file, unsigned int cmd,
+							unsigned long arg)
 {
 	int new_heartbeat;
 	int options, retval = -EINVAL;
 
 	switch (cmd) {
-		case WDIOC_GETSUPPORT:
-			return copy_to_user((struct watchdog_info *)arg,
-					  &sh_wdt_info,
-					  sizeof(sh_wdt_info)) ? -EFAULT : 0;
-		case WDIOC_GETSTATUS:
-		case WDIOC_GETBOOTSTATUS:
-			return put_user(0, (int *)arg);
-		case WDIOC_KEEPALIVE:
-			sh_wdt_keepalive();
-			return 0;
-		case WDIOC_SETTIMEOUT:
-			if (get_user(new_heartbeat, (int *)arg))
-				return -EFAULT;
-
-			if (sh_wdt_set_heartbeat(new_heartbeat))
-				return -EINVAL;
-
-			sh_wdt_keepalive();
-			/* Fall */
-		case WDIOC_GETTIMEOUT:
-			return put_user(heartbeat, (int *)arg);
-		case WDIOC_SETOPTIONS:
-			if (get_user(options, (int *)arg))
-				return -EFAULT;
-
-			if (options & WDIOS_DISABLECARD) {
-				sh_wdt_stop();
-				retval = 0;
-			}
+	case WDIOC_GETSUPPORT:
+		return copy_to_user((struct watchdog_info *)arg,
+			  &sh_wdt_info, sizeof(sh_wdt_info)) ? -EFAULT : 0;
+	case WDIOC_GETSTATUS:
+	case WDIOC_GETBOOTSTATUS:
+		return put_user(0, (int *)arg);
+	case WDIOC_SETOPTIONS:
+		if (get_user(options, (int *)arg))
+			return -EFAULT;
+
+		if (options & WDIOS_DISABLECARD) {
+			sh_wdt_stop();
+			retval = 0;
+		}
 
-			if (options & WDIOS_ENABLECARD) {
-				sh_wdt_start();
-				retval = 0;
-			}
+		if (options & WDIOS_ENABLECARD) {
+			sh_wdt_start();
+			retval = 0;
+		}
 
-			return retval;
-		default:
-			return -ENOTTY;
-	}
+		return retval;
+	case WDIOC_KEEPALIVE:
+		sh_wdt_keepalive();
+		return 0;
+	case WDIOC_SETTIMEOUT:
+		if (get_user(new_heartbeat, (int *)arg))
+			return -EFAULT;
 
+		if (sh_wdt_set_heartbeat(new_heartbeat))
+			return -EINVAL;
+
+		sh_wdt_keepalive();
+		/* Fall */
+	case WDIOC_GETTIMEOUT:
+		return put_user(heartbeat, (int *)arg);
+	default:
+		return -ENOTTY;
+	}
 	return 0;
 }
 
@@ -390,13 +408,13 @@ static const struct file_operations sh_wdt_fops = {
 	.owner		= THIS_MODULE,
 	.llseek		= no_llseek,
 	.write		= sh_wdt_write,
-	.ioctl		= sh_wdt_ioctl,
+	.unlocked_ioctl	= sh_wdt_ioctl,
 	.open		= sh_wdt_open,
 	.release	= sh_wdt_close,
 	.mmap		= sh_wdt_mmap,
 };
 
-static struct watchdog_info sh_wdt_info = {
+static const struct watchdog_info sh_wdt_info = {
 	.options		= WDIOF_KEEPALIVEPING | WDIOF_SETTIMEOUT |
 				  WDIOF_MAGICCLOSE,
 	.firmware_version	= 1,
@@ -422,30 +440,33 @@ static int __init sh_wdt_init(void)
 {
 	int rc;
 
-	if ((clock_division_ratio < 0x5) || (clock_division_ratio > 0x7)) {
+	if (clock_division_ratio < 0x5 || clock_division_ratio > 0x7) {
 		clock_division_ratio = WTCSR_CKS_4096;
-		printk(KERN_INFO PFX "clock_division_ratio value must "
-		       "be 0x5<=x<=0x7, using %d\n", clock_division_ratio);
+		printk(KERN_INFO PFX
+		  "clock_division_ratio value must be 0x5<=x<=0x7, using %d\n",
+				clock_division_ratio);
 	}
 
 	rc = sh_wdt_set_heartbeat(heartbeat);
 	if (unlikely(rc)) {
 		heartbeat = WATCHDOG_HEARTBEAT;
-		printk(KERN_INFO PFX "heartbeat value must "
-		       "be 1<=x<=3600, using %d\n", heartbeat);
+		printk(KERN_INFO PFX
+			"heartbeat value must be 1<=x<=3600, using %d\n",
+								heartbeat);
 	}
 
 	rc = register_reboot_notifier(&sh_wdt_notifier);
 	if (unlikely(rc)) {
-		printk(KERN_ERR PFX "Can't register reboot notifier (err=%d)\n",
-		       rc);
+		printk(KERN_ERR PFX
+			"Can't register reboot notifier (err=%d)\n", rc);
 		return rc;
 	}
 
 	rc = misc_register(&sh_wdt_miscdev);
 	if (unlikely(rc)) {
-		printk(KERN_ERR PFX "Can't register miscdev on "
-		       "minor=%d (err=%d)\n", sh_wdt_miscdev.minor, rc);
+		printk(KERN_ERR PFX
+			"Can't register miscdev on minor=%d (err=%d)\n",
+						sh_wdt_miscdev.minor, rc);
 		unregister_reboot_notifier(&sh_wdt_notifier);
 		return rc;
 	}
@@ -476,10 +497,14 @@ module_param(clock_division_ratio, int, 0);
 MODULE_PARM_DESC(clock_division_ratio, "Clock division ratio. Valid ranges are from 0x5 (1.31ms) to 0x7 (5.25ms). (default=" __MODULE_STRING(clock_division_ratio) ")");
 
 module_param(heartbeat, int, 0);
-MODULE_PARM_DESC(heartbeat, "Watchdog heartbeat in seconds. (1<=heartbeat<=3600, default=" __MODULE_STRING(WATCHDOG_HEARTBEAT) ")");
+MODULE_PARM_DESC(heartbeat,
+	"Watchdog heartbeat in seconds. (1 <= heartbeat <= 3600, default="
+				__MODULE_STRING(WATCHDOG_HEARTBEAT) ")");
 
 module_param(nowayout, int, 0);
-MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=" __MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
+MODULE_PARM_DESC(nowayout,
+	"Watchdog cannot be stopped once started (default="
+				__MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
 
 module_init(sh_wdt_init);
 module_exit(sh_wdt_exit);
diff --git a/drivers/watchdog/smsc37b787_wdt.c b/drivers/watchdog/smsc37b787_wdt.c
index 5d2b5ba61414..988ff1d5b4be 100644
--- a/drivers/watchdog/smsc37b787_wdt.c
+++ b/drivers/watchdog/smsc37b787_wdt.c
@@ -18,7 +18,7 @@
  *  History:
  *	2003 - Created version 1.0 for Linux 2.4.x.
  *	2006 - Ported to Linux 2.6, added nowayout and MAGICCLOSE
- *             features. Released version 1.1
+ *	       features. Released version 1.1
  *
  *  Theory of operation:
  *
@@ -55,9 +55,9 @@
 #include <linux/reboot.h>
 #include <linux/init.h>
 #include <linux/spinlock.h>
+#include <linux/io.h>
+#include <linux/uaccess.h>
 
-#include <asm/io.h>
-#include <asm/uaccess.h>
 #include <asm/system.h>
 
 /* enable support for minutes as units? */
@@ -71,15 +71,15 @@
 #define UNIT_MINUTE     1
 
 #define MODNAME		"smsc37b787_wdt: "
-#define VERSION         "1.1"
+#define VERSION		"1.1"
 
-#define IOPORT          0x3F0
+#define IOPORT		0x3F0
 #define IOPORT_SIZE     2
-#define IODEV_NO        8
+#define IODEV_NO	8
 
-static int unit = UNIT_SECOND;  /* timer's unit */
-static int timeout = 60;        /* timeout value: default is 60 "units" */
-static unsigned long timer_enabled = 0;   /* is the timer enabled? */
+static int unit = UNIT_SECOND;	/* timer's unit */
+static int timeout = 60;	/* timeout value: default is 60 "units" */
+static unsigned long timer_enabled;   /* is the timer enabled? */
 
 static char expect_close;       /* is the close expected? */
 
@@ -93,114 +93,121 @@ static int nowayout = WATCHDOG_NOWAYOUT;
 
 static inline void open_io_config(void)
 {
-        outb(0x55, IOPORT);
+	outb(0x55, IOPORT);
 	mdelay(1);
-        outb(0x55, IOPORT);
+	outb(0x55, IOPORT);
 }
 
 /* lock the IO chip */
 static inline void close_io_config(void)
 {
-        outb(0xAA, IOPORT);
+	outb(0xAA, IOPORT);
 }
 
 /* select the IO device */
 static inline void select_io_device(unsigned char devno)
 {
-        outb(0x07, IOPORT);
-        outb(devno, IOPORT+1);
+	outb(0x07, IOPORT);
+	outb(devno, IOPORT+1);
 }
 
 /* write to the control register */
 static inline void write_io_cr(unsigned char reg, unsigned char data)
 {
-        outb(reg, IOPORT);
-        outb(data, IOPORT+1);
+	outb(reg, IOPORT);
+	outb(data, IOPORT+1);
 }
 
 /* read from the control register */
 static inline char read_io_cr(unsigned char reg)
 {
-        outb(reg, IOPORT);
-        return inb(IOPORT+1);
+	outb(reg, IOPORT);
+	return inb(IOPORT+1);
 }
 
 /* -- Medium level functions ------------------------------------*/
 
 static inline void gpio_bit12(unsigned char reg)
 {
-	// -- General Purpose I/O Bit 1.2 --
-	// Bit 0,   In/Out: 0 = Output, 1 = Input
-	// Bit 1,   Polarity: 0 = No Invert, 1 = Invert
-	// Bit 2,   Group Enable Intr.: 0 = Disable, 1 = Enable
-	// Bit 3/4, Function select: 00 = GPI/O, 01 = WDT, 10 = P17,
-	//                           11 = Either Edge Triggered Intr. 2
-        // Bit 5/6  (Reserved)
-	// Bit 7,   Output Type: 0 = Push Pull Bit, 1 = Open Drain
-        write_io_cr(0xE2, reg);
+	/* -- General Purpose I/O Bit 1.2 --
+	 * Bit 0,   In/Out: 0 = Output, 1 = Input
+	 * Bit 1,   Polarity: 0 = No Invert, 1 = Invert
+	 * Bit 2,   Group Enable Intr.: 0 = Disable, 1 = Enable
+	 * Bit 3/4, Function select: 00 = GPI/O, 01 = WDT, 10 = P17,
+	 *                           11 = Either Edge Triggered Intr. 2
+	 * Bit 5/6  (Reserved)
+	 * Bit 7,   Output Type: 0 = Push Pull Bit, 1 = Open Drain
+	 */
+	write_io_cr(0xE2, reg);
 }
 
 static inline void gpio_bit13(unsigned char reg)
 {
-	// -- General Purpose I/O Bit 1.3 --
-	// Bit 0,  In/Out: 0 = Output, 1 = Input
-	// Bit 1,  Polarity: 0 = No Invert, 1 = Invert
-	// Bit 2,  Group Enable Intr.: 0 = Disable, 1 = Enable
-	// Bit 3,  Function select: 0 = GPI/O, 1 = LED
-        // Bit 4-6 (Reserved)
-	// Bit 7,  Output Type: 0 = Push Pull Bit, 1 = Open Drain
-        write_io_cr(0xE3, reg);
+	/* -- General Purpose I/O Bit 1.3 --
+	 * Bit 0,  In/Out: 0 = Output, 1 = Input
+	 * Bit 1,  Polarity: 0 = No Invert, 1 = Invert
+	 * Bit 2,  Group Enable Intr.: 0 = Disable, 1 = Enable
+	 * Bit 3,  Function select: 0 = GPI/O, 1 = LED
+	 * Bit 4-6 (Reserved)
+	 * Bit 7,  Output Type: 0 = Push Pull Bit, 1 = Open Drain
+	 */
+	write_io_cr(0xE3, reg);
 }
 
 static inline void wdt_timer_units(unsigned char new_units)
 {
-	// -- Watchdog timer units --
-	// Bit 0-6 (Reserved)
-	// Bit 7,  WDT Time-out Value Units Select
-	//         (0 = Minutes, 1 = Seconds)
-        write_io_cr(0xF1, new_units);
+	/* -- Watchdog timer units --
+	 * Bit 0-6 (Reserved)
+	 * Bit 7,  WDT Time-out Value Units Select
+	 *         (0 = Minutes, 1 = Seconds)
+	 */
+	write_io_cr(0xF1, new_units);
 }
 
 static inline void wdt_timeout_value(unsigned char new_timeout)
 {
-	// -- Watchdog Timer Time-out Value --
-	// Bit 0-7 Binary coded units (0=Disabled, 1..255)
-        write_io_cr(0xF2, new_timeout);
+	/* -- Watchdog Timer Time-out Value --
+	 * Bit 0-7 Binary coded units (0=Disabled, 1..255)
+	 */
+	write_io_cr(0xF2, new_timeout);
 }
 
 static inline void wdt_timer_conf(unsigned char conf)
 {
-	// -- Watchdog timer configuration --
-	// Bit 0   Joystick enable: 0* = No Reset, 1 = Reset WDT upon Gameport I/O
-	// Bit 1   Keyboard enable: 0* = No Reset, 1 = Reset WDT upon KBD Intr.
-	// Bit 2   Mouse enable: 0* = No Reset, 1 = Reset WDT upon Mouse Intr.
-        // Bit 3   Reset the timer
-        //         (Wrong in SMsC documentation? Given as: PowerLED Timout Enabled)
-	// Bit 4-7 WDT Interrupt Mapping: (0000* = Disabled,
-	//            0001=IRQ1, 0010=(Invalid), 0011=IRQ3 to 1111=IRQ15)
-        write_io_cr(0xF3, conf);
+	/* -- Watchdog timer configuration --
+	 * Bit 0   Joystick enable: 0* = No Reset, 1 = Reset WDT upon
+	 *							Gameport I/O
+	 * Bit 1   Keyboard enable: 0* = No Reset, 1 = Reset WDT upon KBD Intr.
+	 * Bit 2   Mouse enable: 0* = No Reset, 1 = Reset WDT upon Mouse Intr
+	 * Bit 3   Reset the timer
+	 *         (Wrong in SMsC documentation? Given as: PowerLED Timout
+	 *							Enabled)
+	 * Bit 4-7 WDT Interrupt Mapping: (0000* = Disabled,
+	 *            0001=IRQ1, 0010=(Invalid), 0011=IRQ3 to 1111=IRQ15)
+	 */
+	write_io_cr(0xF3, conf);
 }
 
 static inline void wdt_timer_ctrl(unsigned char reg)
 {
-	// -- Watchdog timer control --
-	// Bit 0   Status Bit: 0 = Timer counting, 1 = Timeout occured
-	// Bit 1   Power LED Toggle: 0 = Disable Toggle, 1 = Toggle at 1 Hz
-	// Bit 2   Force Timeout: 1 = Forces WD timeout event (self-cleaning)
-	// Bit 3   P20 Force Timeout enabled:
-	//          0 = P20 activity does not generate the WD timeout event
-	//          1 = P20 Allows rising edge of P20, from the keyboard
-	//              controller, to force the WD timeout event.
-	// Bit 4   (Reserved)
-	// -- Soft power management --
-	// Bit 5   Stop Counter: 1 = Stop software power down counter
-	//            set via register 0xB8, (self-cleaning)
-	//            (Upon read: 0 = Counter running, 1 = Counter stopped)
-	// Bit 6   Restart Counter: 1 = Restart software power down counter
-	//            set via register 0xB8, (self-cleaning)
-	// Bit 7   SPOFF: 1 = Force software power down (self-cleaning)
-
-        write_io_cr(0xF4, reg);
+	/* -- Watchdog timer control --
+	 * Bit 0   Status Bit: 0 = Timer counting, 1 = Timeout occured
+	 * Bit 1   Power LED Toggle: 0 = Disable Toggle, 1 = Toggle at 1 Hz
+	 * Bit 2   Force Timeout: 1 = Forces WD timeout event (self-cleaning)
+	 * Bit 3   P20 Force Timeout enabled:
+	 *          0 = P20 activity does not generate the WD timeout event
+	 *          1 = P20 Allows rising edge of P20, from the keyboard
+	 *              controller, to force the WD timeout event.
+	 * Bit 4   (Reserved)
+	 * -- Soft power management --
+	 * Bit 5   Stop Counter: 1 = Stop software power down counter
+	 *            set via register 0xB8, (self-cleaning)
+	 *            (Upon read: 0 = Counter running, 1 = Counter stopped)
+	 * Bit 6   Restart Counter: 1 = Restart software power down counter
+	 *            set via register 0xB8, (self-cleaning)
+	 * Bit 7   SPOFF: 1 = Force software power down (self-cleaning)
+	 */
+	write_io_cr(0xF4, reg);
 }
 
 /* -- Higher level functions ------------------------------------*/
@@ -209,33 +216,34 @@ static inline void wdt_timer_ctrl(unsigned char reg)
 
 static void wb_smsc_wdt_initialize(void)
 {
-        unsigned char old;
+	unsigned char old;
 
 	spin_lock(&io_lock);
-        open_io_config();
-        select_io_device(IODEV_NO);
+	open_io_config();
+	select_io_device(IODEV_NO);
 
-	// enable the watchdog
-	gpio_bit13(0x08);  // Select pin 80 = LED not GPIO
-	gpio_bit12(0x0A);  // Set pin 79 = WDT not GPIO/Output/Polarity=Invert
+	/* enable the watchdog */
+	gpio_bit13(0x08);  /* Select pin 80 = LED not GPIO */
+	gpio_bit12(0x0A);  /* Set pin 79 = WDT not
+			      GPIO/Output/Polarity=Invert */
+	/* disable the timeout */
+	wdt_timeout_value(0);
 
-	// disable the timeout
-        wdt_timeout_value(0);
+	/* reset control register */
+	wdt_timer_ctrl(0x00);
 
-	// reset control register
-        wdt_timer_ctrl(0x00);
-
-	// reset configuration register
+	/* reset configuration register */
 	wdt_timer_conf(0x00);
 
-	// read old (timer units) register
-        old = read_io_cr(0xF1) & 0x7F;
-        if (unit == UNIT_SECOND) old |= 0x80; // set to seconds
+	/* read old (timer units) register */
+	old = read_io_cr(0xF1) & 0x7F;
+	if (unit == UNIT_SECOND)
+		old |= 0x80;	/* set to seconds */
 
-	// set the watchdog timer units
-        wdt_timer_units(old);
+	/* set the watchdog timer units */
+	wdt_timer_units(old);
 
-        close_io_config();
+	close_io_config();
 	spin_unlock(&io_lock);
 }
 
@@ -244,23 +252,23 @@ static void wb_smsc_wdt_initialize(void)
 static void wb_smsc_wdt_shutdown(void)
 {
 	spin_lock(&io_lock);
-        open_io_config();
-        select_io_device(IODEV_NO);
+	open_io_config();
+	select_io_device(IODEV_NO);
 
-	// disable the watchdog
-        gpio_bit13(0x09);
-        gpio_bit12(0x09);
+	/* disable the watchdog */
+	gpio_bit13(0x09);
+	gpio_bit12(0x09);
 
-	// reset watchdog config register
+	/* reset watchdog config register */
 	wdt_timer_conf(0x00);
 
-	// reset watchdog control register
-        wdt_timer_ctrl(0x00);
+	/* reset watchdog control register */
+	wdt_timer_ctrl(0x00);
 
-	// disable timeout
-        wdt_timeout_value(0x00);
+	/* disable timeout */
+	wdt_timeout_value(0x00);
 
-        close_io_config();
+	close_io_config();
 	spin_unlock(&io_lock);
 }
 
@@ -269,16 +277,16 @@ static void wb_smsc_wdt_shutdown(void)
 static void wb_smsc_wdt_set_timeout(unsigned char new_timeout)
 {
 	spin_lock(&io_lock);
-        open_io_config();
-        select_io_device(IODEV_NO);
+	open_io_config();
+	select_io_device(IODEV_NO);
 
-	// set Power LED to blink, if we enable the timeout
-        wdt_timer_ctrl((new_timeout == 0) ? 0x00 : 0x02);
+	/* set Power LED to blink, if we enable the timeout */
+	wdt_timer_ctrl((new_timeout == 0) ? 0x00 : 0x02);
 
-	// set timeout value
-        wdt_timeout_value(new_timeout);
+	/* set timeout value */
+	wdt_timeout_value(new_timeout);
 
-        close_io_config();
+	close_io_config();
 	spin_unlock(&io_lock);
 }
 
@@ -286,32 +294,32 @@ static void wb_smsc_wdt_set_timeout(unsigned char new_timeout)
 
 static unsigned char wb_smsc_wdt_get_timeout(void)
 {
-        unsigned char set_timeout;
+	unsigned char set_timeout;
 
 	spin_lock(&io_lock);
-        open_io_config();
-        select_io_device(IODEV_NO);
-        set_timeout = read_io_cr(0xF2);
-        close_io_config();
+	open_io_config();
+	select_io_device(IODEV_NO);
+	set_timeout = read_io_cr(0xF2);
+	close_io_config();
 	spin_unlock(&io_lock);
 
-        return set_timeout;
+	return set_timeout;
 }
 
 /* disable watchdog */
 
 static void wb_smsc_wdt_disable(void)
 {
-        // set the timeout to 0 to disable the watchdog
-        wb_smsc_wdt_set_timeout(0);
+	/* set the timeout to 0 to disable the watchdog */
+	wb_smsc_wdt_set_timeout(0);
 }
 
 /* enable watchdog by setting the current timeout */
 
 static void wb_smsc_wdt_enable(void)
 {
-        // set the current timeout...
-        wb_smsc_wdt_set_timeout(timeout);
+	/* set the current timeout... */
+	wb_smsc_wdt_set_timeout(timeout);
 }
 
 /* reset the timer */
@@ -319,14 +327,14 @@ static void wb_smsc_wdt_enable(void)
 static void wb_smsc_wdt_reset_timer(void)
 {
 	spin_lock(&io_lock);
-        open_io_config();
-        select_io_device(IODEV_NO);
+	open_io_config();
+	select_io_device(IODEV_NO);
 
-	// reset the timer
+	/* reset the timer */
 	wdt_timeout_value(timeout);
 	wdt_timer_conf(0x08);
 
-        close_io_config();
+	close_io_config();
 	spin_unlock(&io_lock);
 }
 
@@ -355,7 +363,9 @@ static int wb_smsc_wdt_open(struct inode *inode, struct file *file)
 	/* Reload and activate timer */
 	wb_smsc_wdt_enable();
 
-	printk(KERN_INFO MODNAME "Watchdog enabled. Timeout set to %d %s.\n", timeout, (unit == UNIT_SECOND) ? "second(s)" : "minute(s)");
+	printk(KERN_INFO MODNAME
+		"Watchdog enabled. Timeout set to %d %s.\n",
+		timeout, (unit == UNIT_SECOND) ? "second(s)" : "minute(s)");
 
 	return nonseekable_open(inode, file);
 }
@@ -367,10 +377,12 @@ static int wb_smsc_wdt_release(struct inode *inode, struct file *file)
 	/* Shut off the timer. */
 
 	if (expect_close == 42) {
-	        wb_smsc_wdt_disable();
-		printk(KERN_INFO MODNAME "Watchdog disabled, sleeping again...\n");
+		wb_smsc_wdt_disable();
+		printk(KERN_INFO MODNAME
+				"Watchdog disabled, sleeping again...\n");
 	} else {
-		printk(KERN_CRIT MODNAME "Unexpected close, not stopping watchdog!\n");
+		printk(KERN_CRIT MODNAME
+				"Unexpected close, not stopping watchdog!\n");
 		wb_smsc_wdt_reset_timer();
 	}
 
@@ -392,10 +404,11 @@ static ssize_t wb_smsc_wdt_write(struct file *file, const char __user *data,
 			/* reset expect flag */
 			expect_close = 0;
 
-			/* scan to see whether or not we got the magic character */
+			/* scan to see whether or not we got the
+			   magic character */
 			for (i = 0; i != len; i++) {
 				char c;
-				if (get_user(c, data+i))
+				if (get_user(c, data + i))
 					return -EFAULT;
 				if (c == 'V')
 					expect_close = 42;
@@ -410,8 +423,8 @@ static ssize_t wb_smsc_wdt_write(struct file *file, const char __user *data,
 
 /* ioctl => control interface */
 
-static int wb_smsc_wdt_ioctl(struct inode *inode, struct file *file,
-			     unsigned int cmd, unsigned long arg)
+static long wb_smsc_wdt_ioctl(struct file *file,
+					unsigned int cmd, unsigned long arg)
 {
 	int new_timeout;
 
@@ -420,89 +433,73 @@ static int wb_smsc_wdt_ioctl(struct inode *inode, struct file *file,
 		int __user *i;
 	} uarg;
 
-	static struct watchdog_info ident = {
+	static const struct watchdog_info ident = {
 		.options = 		WDIOF_KEEPALIVEPING |
-		                        WDIOF_SETTIMEOUT |
+					WDIOF_SETTIMEOUT |
 					WDIOF_MAGICCLOSE,
 		.firmware_version =	0,
-		.identity = 		"SMsC 37B787 Watchdog"
+		.identity = 		"SMsC 37B787 Watchdog",
 	};
 
 	uarg.i = (int __user *)arg;
 
 	switch (cmd) {
-		default:
-			return -ENOTTY;
-
-		case WDIOC_GETSUPPORT:
-			return copy_to_user(uarg.ident, &ident,
-				sizeof(ident)) ? -EFAULT : 0;
-
-		case WDIOC_GETSTATUS:
-			return put_user(wb_smsc_wdt_status(), uarg.i);
-
-		case WDIOC_GETBOOTSTATUS:
-			return put_user(0, uarg.i);
-
-		case WDIOC_KEEPALIVE:
-			wb_smsc_wdt_reset_timer();
-			return 0;
-
-		case WDIOC_SETTIMEOUT:
-			if (get_user(new_timeout, uarg.i))
-				return -EFAULT;
-
-			// the API states this is given in secs
-			if (unit == UNIT_MINUTE)
-			  new_timeout /= 60;
-
-			if (new_timeout < 0 || new_timeout > MAX_TIMEOUT)
-				return -EINVAL;
-
-			timeout = new_timeout;
-			wb_smsc_wdt_set_timeout(timeout);
-
-			// fall through and return the new timeout...
-
-		case WDIOC_GETTIMEOUT:
-
-		        new_timeout = timeout;
-
-			if (unit == UNIT_MINUTE)
-			  new_timeout *= 60;
-
-			return put_user(new_timeout, uarg.i);
-
-		case WDIOC_SETOPTIONS:
-		{
-			int options, retval = -EINVAL;
-
-			if (get_user(options, uarg.i))
-				return -EFAULT;
-
-			if (options & WDIOS_DISABLECARD) {
-				wb_smsc_wdt_disable();
-				retval = 0;
-			}
+	case WDIOC_GETSUPPORT:
+		return copy_to_user(uarg.ident, &ident, sizeof(ident))
+								? -EFAULT : 0;
+	case WDIOC_GETSTATUS:
+		return put_user(wb_smsc_wdt_status(), uarg.i);
+	case WDIOC_GETBOOTSTATUS:
+		return put_user(0, uarg.i);
+	case WDIOC_SETOPTIONS:
+	{
+		int options, retval = -EINVAL;
 
-			if (options & WDIOS_ENABLECARD) {
-				wb_smsc_wdt_enable();
-				retval = 0;
-			}
+		if (get_user(options, uarg.i))
+			return -EFAULT;
 
-			return retval;
+		if (options & WDIOS_DISABLECARD) {
+			wb_smsc_wdt_disable();
+			retval = 0;
+		}
+		if (options & WDIOS_ENABLECARD) {
+			wb_smsc_wdt_enable();
+			retval = 0;
 		}
+		return retval;
+	}
+	case WDIOC_KEEPALIVE:
+		wb_smsc_wdt_reset_timer();
+		return 0;
+	case WDIOC_SETTIMEOUT:
+		if (get_user(new_timeout, uarg.i))
+			return -EFAULT;
+		/* the API states this is given in secs */
+		if (unit == UNIT_MINUTE)
+			new_timeout /= 60;
+		if (new_timeout < 0 || new_timeout > MAX_TIMEOUT)
+			return -EINVAL;
+		timeout = new_timeout;
+		wb_smsc_wdt_set_timeout(timeout);
+		/* fall through and return the new timeout... */
+	case WDIOC_GETTIMEOUT:
+		new_timeout = timeout;
+		if (unit == UNIT_MINUTE)
+			  new_timeout *= 60;
+		return put_user(new_timeout, uarg.i);
+	default:
+		return -ENOTTY;
 	}
 }
 
 /* -- Notifier funtions -----------------------------------------*/
 
-static int wb_smsc_wdt_notify_sys(struct notifier_block *this, unsigned long code, void *unused)
+static int wb_smsc_wdt_notify_sys(struct notifier_block *this,
+					unsigned long code, void *unused)
 {
-	if (code == SYS_DOWN || code == SYS_HALT)
-	{
-                // set timeout to 0, to avoid possible race-condition
-	        timeout = 0;
+	if (code == SYS_DOWN || code == SYS_HALT) {
+		/* set timeout to 0, to avoid possible race-condition */
+		timeout = 0;
 		wb_smsc_wdt_disable();
 	}
 	return NOTIFY_DONE;
@@ -510,23 +507,20 @@ static int wb_smsc_wdt_notify_sys(struct notifier_block *this, unsigned long cod
 
 /* -- Module's structures ---------------------------------------*/
 
-static const struct file_operations wb_smsc_wdt_fops =
-{
-	.owner          = THIS_MODULE,
+static const struct file_operations wb_smsc_wdt_fops = {
+	.owner	  = THIS_MODULE,
 	.llseek		= no_llseek,
 	.write		= wb_smsc_wdt_write,
-	.ioctl		= wb_smsc_wdt_ioctl,
+	.unlocked_ioctl	= wb_smsc_wdt_ioctl,
 	.open		= wb_smsc_wdt_open,
 	.release	= wb_smsc_wdt_release,
 };
 
-static struct notifier_block wb_smsc_wdt_notifier =
-{
+static struct notifier_block wb_smsc_wdt_notifier = {
 	.notifier_call  = wb_smsc_wdt_notify_sys,
 };
 
-static struct miscdevice wb_smsc_wdt_miscdev =
-{
+static struct miscdevice wb_smsc_wdt_miscdev = {
 	.minor		= WATCHDOG_MINOR,
 	.name		= "watchdog",
 	.fops		= &wb_smsc_wdt_fops,
@@ -540,39 +534,44 @@ static int __init wb_smsc_wdt_init(void)
 {
 	int ret;
 
-	printk("SMsC 37B787 watchdog component driver " VERSION " initialising...\n");
+	printk(KERN_INFO "SMsC 37B787 watchdog component driver "
+					VERSION " initialising...\n");
 
 	if (!request_region(IOPORT, IOPORT_SIZE, "SMsC 37B787 watchdog")) {
-		printk(KERN_ERR MODNAME "Unable to register IO port %#x\n", IOPORT);
+		printk(KERN_ERR MODNAME "Unable to register IO port %#x\n",
+								IOPORT);
 		ret = -EBUSY;
 		goto out_pnp;
 	}
 
-        // set new maximum, if it's too big
-        if (timeout > MAX_TIMEOUT)
-               timeout = MAX_TIMEOUT;
+	/* set new maximum, if it's too big */
+	if (timeout > MAX_TIMEOUT)
+		timeout = MAX_TIMEOUT;
 
-        // init the watchdog timer
-        wb_smsc_wdt_initialize();
+	/* init the watchdog timer */
+	wb_smsc_wdt_initialize();
 
 	ret = register_reboot_notifier(&wb_smsc_wdt_notifier);
 	if (ret) {
-		printk(KERN_ERR MODNAME "Unable to register reboot notifier err = %d\n", ret);
+		printk(KERN_ERR MODNAME
+			"Unable to register reboot notifier err = %d\n", ret);
 		goto out_io;
 	}
 
 	ret = misc_register(&wb_smsc_wdt_miscdev);
 	if (ret) {
-		printk(KERN_ERR MODNAME "Unable to register miscdev on minor %d\n", WATCHDOG_MINOR);
+		printk(KERN_ERR MODNAME
+			"Unable to register miscdev on minor %d\n",
+							WATCHDOG_MINOR);
 		goto out_rbt;
 	}
 
-	// output info
-	printk(KERN_INFO MODNAME "Timeout set to %d %s.\n", timeout, (unit == UNIT_SECOND) ? "second(s)" : "minute(s)");
-	printk(KERN_INFO MODNAME "Watchdog initialized and sleeping (nowayout=%d)...\n", nowayout);
-
-	// ret = 0
-
+	/* output info */
+	printk(KERN_INFO MODNAME "Timeout set to %d %s.\n",
+		timeout, (unit == UNIT_SECOND) ? "second(s)" : "minute(s)");
+	printk(KERN_INFO MODNAME
+		"Watchdog initialized and sleeping (nowayout=%d)...\n",
+								nowayout);
 out_clean:
 	return ret;
 
@@ -591,8 +590,7 @@ out_pnp:
 static void __exit wb_smsc_wdt_exit(void)
 {
 	/* Stop the timer before we leave */
-	if (!nowayout)
-	{
+	if (!nowayout) {
 		wb_smsc_wdt_shutdown();
 		printk(KERN_INFO MODNAME "Watchdog disabled.\n");
 	}
@@ -601,25 +599,29 @@ static void __exit wb_smsc_wdt_exit(void)
 	unregister_reboot_notifier(&wb_smsc_wdt_notifier);
 	release_region(IOPORT, IOPORT_SIZE);
 
-	printk("SMsC 37B787 watchdog component driver removed.\n");
+	printk(KERN_INFO "SMsC 37B787 watchdog component driver removed.\n");
 }
 
 module_init(wb_smsc_wdt_init);
 module_exit(wb_smsc_wdt_exit);
 
 MODULE_AUTHOR("Sven Anders <anders@anduras.de>");
-MODULE_DESCRIPTION("Driver for SMsC 37B787 watchdog component (Version " VERSION ")");
+MODULE_DESCRIPTION("Driver for SMsC 37B787 watchdog component (Version "
+								VERSION ")");
 MODULE_LICENSE("GPL");
 
 MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR);
 
 #ifdef SMSC_SUPPORT_MINUTES
 module_param(unit, int, 0);
-MODULE_PARM_DESC(unit, "set unit to use, 0=seconds or 1=minutes, default is 0");
+MODULE_PARM_DESC(unit,
+		"set unit to use, 0=seconds or 1=minutes, default is 0");
 #endif
 
 module_param(timeout, int, 0);
 MODULE_PARM_DESC(timeout, "range is 1-255 units, default is 60");
 
 module_param(nowayout, int, 0);
-MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=" __MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
+MODULE_PARM_DESC(nowayout,
+		"Watchdog cannot be stopped once started (default="
+				__MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
diff --git a/drivers/watchdog/softdog.c b/drivers/watchdog/softdog.c
index 9c3694909243..c650464c5c63 100644
--- a/drivers/watchdog/softdog.c
+++ b/drivers/watchdog/softdog.c
@@ -47,19 +47,22 @@
 #include <linux/reboot.h>
 #include <linux/init.h>
 #include <linux/jiffies.h>
-
-#include <asm/uaccess.h>
+#include <linux/uaccess.h>
 
 #define PFX "SoftDog: "
 
 #define TIMER_MARGIN	60		/* Default is 60 seconds */
 static int soft_margin = TIMER_MARGIN;	/* in seconds */
 module_param(soft_margin, int, 0);
-MODULE_PARM_DESC(soft_margin, "Watchdog soft_margin in seconds. (0<soft_margin<65536, default=" __MODULE_STRING(TIMER_MARGIN) ")");
+MODULE_PARM_DESC(soft_margin,
+	"Watchdog soft_margin in seconds. (0 < soft_margin < 65536, default="
+					__MODULE_STRING(TIMER_MARGIN) ")");
 
 static int nowayout = WATCHDOG_NOWAYOUT;
 module_param(nowayout, int, 0);
-MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=" __MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
+MODULE_PARM_DESC(nowayout,
+		"Watchdog cannot be stopped once started (default="
+				__MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
 
 #ifdef ONLY_TESTING
 static int soft_noboot = 1;
@@ -93,8 +96,7 @@ static void watchdog_fire(unsigned long data)
 
 	if (soft_noboot)
 		printk(KERN_CRIT PFX "Triggered - Reboot ignored.\n");
-	else
-	{
+	else {
 		printk(KERN_CRIT PFX "Initiating system reboot.\n");
 		emergency_restart();
 		printk(KERN_CRIT PFX "Reboot didn't ?????\n");
@@ -153,7 +155,8 @@ static int softdog_release(struct inode *inode, struct file *file)
 		softdog_stop();
 		module_put(THIS_MODULE);
 	} else {
-		printk(KERN_CRIT PFX "Unexpected close, not stopping watchdog!\n");
+		printk(KERN_CRIT PFX
+			"Unexpected close, not stopping watchdog!\n");
 		set_bit(0, &orphan_timer);
 		softdog_keepalive();
 	}
@@ -162,12 +165,13 @@ static int softdog_release(struct inode *inode, struct file *file)
 	return 0;
 }
 
-static ssize_t softdog_write(struct file *file, const char __user *data, size_t len, loff_t *ppos)
+static ssize_t softdog_write(struct file *file, const char __user *data,
+						size_t len, loff_t *ppos)
 {
 	/*
 	 *	Refresh the timer.
 	 */
-	if(len) {
+	if (len) {
 		if (!nowayout) {
 			size_t i;
 
@@ -188,13 +192,13 @@ static ssize_t softdog_write(struct file *file, const char __user *data, size_t
 	return len;
 }
 
-static int softdog_ioctl(struct inode *inode, struct file *file,
-	unsigned int cmd, unsigned long arg)
+static long softdog_ioctl(struct file *file, unsigned int cmd,
+							unsigned long arg)
 {
 	void __user *argp = (void __user *)arg;
 	int __user *p = argp;
 	int new_margin;
-	static struct watchdog_info ident = {
+	static const struct watchdog_info ident = {
 		.options =		WDIOF_SETTIMEOUT |
 					WDIOF_KEEPALIVEPING |
 					WDIOF_MAGICCLOSE,
@@ -202,26 +206,25 @@ static int softdog_ioctl(struct inode *inode, struct file *file,
 		.identity =		"Software Watchdog",
 	};
 	switch (cmd) {
-		default:
-			return -ENOTTY;
-		case WDIOC_GETSUPPORT:
-			return copy_to_user(argp, &ident,
-				sizeof(ident)) ? -EFAULT : 0;
-		case WDIOC_GETSTATUS:
-		case WDIOC_GETBOOTSTATUS:
-			return put_user(0, p);
-		case WDIOC_KEEPALIVE:
-			softdog_keepalive();
-			return 0;
-		case WDIOC_SETTIMEOUT:
-			if (get_user(new_margin, p))
-				return -EFAULT;
-			if (softdog_set_heartbeat(new_margin))
-				return -EINVAL;
-			softdog_keepalive();
-			/* Fall */
-		case WDIOC_GETTIMEOUT:
-			return put_user(soft_margin, p);
+	case WDIOC_GETSUPPORT:
+		return copy_to_user(argp, &ident, sizeof(ident)) ? -EFAULT : 0;
+	case WDIOC_GETSTATUS:
+	case WDIOC_GETBOOTSTATUS:
+		return put_user(0, p);
+	case WDIOC_KEEPALIVE:
+		softdog_keepalive();
+		return 0;
+	case WDIOC_SETTIMEOUT:
+		if (get_user(new_margin, p))
+			return -EFAULT;
+		if (softdog_set_heartbeat(new_margin))
+			return -EINVAL;
+		softdog_keepalive();
+		/* Fall */
+	case WDIOC_GETTIMEOUT:
+		return put_user(soft_margin, p);
+	default:
+		return -ENOTTY;
 	}
 }
 
@@ -232,10 +235,9 @@ static int softdog_ioctl(struct inode *inode, struct file *file,
 static int softdog_notify_sys(struct notifier_block *this, unsigned long code,
 	void *unused)
 {
-	if(code==SYS_DOWN || code==SYS_HALT) {
+	if (code == SYS_DOWN || code == SYS_HALT)
 		/* Turn the WDT off */
 		softdog_stop();
-	}
 	return NOTIFY_DONE;
 }
 
@@ -247,7 +249,7 @@ static const struct file_operations softdog_fops = {
 	.owner		= THIS_MODULE,
 	.llseek		= no_llseek,
 	.write		= softdog_write,
-	.ioctl		= softdog_ioctl,
+	.unlocked_ioctl	= softdog_ioctl,
 	.open		= softdog_open,
 	.release	= softdog_release,
 };
@@ -268,24 +270,27 @@ static int __init watchdog_init(void)
 {
 	int ret;
 
-	/* Check that the soft_margin value is within it's range ; if not reset to the default */
+	/* Check that the soft_margin value is within it's range;
+	   if not reset to the default */
 	if (softdog_set_heartbeat(soft_margin)) {
 		softdog_set_heartbeat(TIMER_MARGIN);
-		printk(KERN_INFO PFX "soft_margin value must be 0<soft_margin<65536, using %d\n",
+		printk(KERN_INFO PFX
+		    "soft_margin must be 0 < soft_margin < 65536, using %d\n",
 			TIMER_MARGIN);
 	}
 
 	ret = register_reboot_notifier(&softdog_notifier);
 	if (ret) {
-		printk (KERN_ERR PFX "cannot register reboot notifier (err=%d)\n",
-			ret);
+		printk(KERN_ERR PFX
+			"cannot register reboot notifier (err=%d)\n", ret);
 		return ret;
 	}
 
 	ret = misc_register(&softdog_miscdev);
 	if (ret) {
-		printk (KERN_ERR PFX "cannot register miscdev on minor=%d (err=%d)\n",
-			WATCHDOG_MINOR, ret);
+		printk(KERN_ERR PFX
+			"cannot register miscdev on minor=%d (err=%d)\n",
+						WATCHDOG_MINOR, ret);
 		unregister_reboot_notifier(&softdog_notifier);
 		return ret;
 	}
diff --git a/drivers/watchdog/txx9wdt.c b/drivers/watchdog/txx9wdt.c
index 57cefef27ce3..6adab77fbbb0 100644
--- a/drivers/watchdog/txx9wdt.c
+++ b/drivers/watchdog/txx9wdt.c
@@ -45,27 +45,34 @@ static unsigned long txx9wdt_alive;
 static int expect_close;
 static struct txx9_tmr_reg __iomem *txx9wdt_reg;
 static struct clk *txx9_imclk;
+static DEFINE_SPINLOCK(txx9_lock);
 
 static void txx9wdt_ping(void)
 {
+	spin_lock(&txx9_lock);
 	__raw_writel(TXx9_TMWTMR_TWIE | TXx9_TMWTMR_TWC, &txx9wdt_reg->wtmr);
+	spin_unlock(&txx9_lock);
 }
 
 static void txx9wdt_start(void)
 {
+	spin_lock(&txx9_lock);
 	__raw_writel(WD_TIMER_CLK * timeout, &txx9wdt_reg->cpra);
 	__raw_writel(WD_TIMER_CCD, &txx9wdt_reg->ccdr);
 	__raw_writel(0, &txx9wdt_reg->tisr);	/* clear pending interrupt */
 	__raw_writel(TXx9_TMTCR_TCE | TXx9_TMTCR_CCDE | TXx9_TMTCR_TMODE_WDOG,
 		     &txx9wdt_reg->tcr);
 	__raw_writel(TXx9_TMWTMR_TWIE | TXx9_TMWTMR_TWC, &txx9wdt_reg->wtmr);
+	spin_unlock(&txx9_lock);
 }
 
 static void txx9wdt_stop(void)
 {
+	spin_lock(&txx9_lock);
 	__raw_writel(TXx9_TMWTMR_WDIS, &txx9wdt_reg->wtmr);
 	__raw_writel(__raw_readl(&txx9wdt_reg->tcr) & ~TXx9_TMTCR_TCE,
 		     &txx9wdt_reg->tcr);
+	spin_unlock(&txx9_lock);
 }
 
 static int txx9wdt_open(struct inode *inode, struct file *file)
@@ -120,13 +127,13 @@ static ssize_t txx9wdt_write(struct file *file, const char __user *data,
 	return len;
 }
 
-static int txx9wdt_ioctl(struct inode *inode, struct file *file,
-	unsigned int cmd, unsigned long arg)
+static long txx9wdt_ioctl(struct file *file, unsigned int cmd,
+							unsigned long arg)
 {
 	void __user *argp = (void __user *)arg;
 	int __user *p = argp;
 	int new_timeout;
-	static struct watchdog_info ident = {
+	static const struct watchdog_info ident = {
 		.options =		WDIOF_SETTIMEOUT |
 					WDIOF_KEEPALIVEPING |
 					WDIOF_MAGICCLOSE,
@@ -135,8 +142,6 @@ static int txx9wdt_ioctl(struct inode *inode, struct file *file,
 	};
 
 	switch (cmd) {
-	default:
-		return -ENOTTY;
 	case WDIOC_GETSUPPORT:
 		return copy_to_user(argp, &ident, sizeof(ident)) ? -EFAULT : 0;
 	case WDIOC_GETSTATUS:
@@ -156,6 +161,8 @@ static int txx9wdt_ioctl(struct inode *inode, struct file *file,
 		/* Fall */
 	case WDIOC_GETTIMEOUT:
 		return put_user(timeout, p);
+	default:
+		return -ENOTTY;
 	}
 }
 
@@ -168,22 +175,22 @@ static int txx9wdt_notify_sys(struct notifier_block *this, unsigned long code,
 }
 
 static const struct file_operations txx9wdt_fops = {
-	.owner =	THIS_MODULE,
-	.llseek =	no_llseek,
-	.write =	txx9wdt_write,
-	.ioctl =	txx9wdt_ioctl,
-	.open =		txx9wdt_open,
-	.release =	txx9wdt_release,
+	.owner		=	THIS_MODULE,
+	.llseek		=	no_llseek,
+	.write		=	txx9wdt_write,
+	.unlocked_ioctl =	txx9wdt_ioctl,
+	.open		=	txx9wdt_open,
+	.release	=	txx9wdt_release,
 };
 
 static struct miscdevice txx9wdt_miscdev = {
-	.minor =	WATCHDOG_MINOR,
-	.name =		"watchdog",
-	.fops =		&txx9wdt_fops,
+	.minor	=	WATCHDOG_MINOR,
+	.name	=	"watchdog",
+	.fops	=	&txx9wdt_fops,
 };
 
 static struct notifier_block txx9wdt_notifier = {
-	.notifier_call = txx9wdt_notify_sys
+	.notifier_call = txx9wdt_notify_sys,
 };
 
 static int __init txx9wdt_probe(struct platform_device *dev)
diff --git a/drivers/watchdog/w83627hf_wdt.c b/drivers/watchdog/w83627hf_wdt.c
index 386492821fc2..69396adaa5c3 100644
--- a/drivers/watchdog/w83627hf_wdt.c
+++ b/drivers/watchdog/w83627hf_wdt.c
@@ -37,9 +37,9 @@
 #include <linux/reboot.h>
 #include <linux/init.h>
 #include <linux/spinlock.h>
+#include <linux/io.h>
+#include <linux/uaccess.h>
 
-#include <asm/io.h>
-#include <asm/uaccess.h>
 #include <asm/system.h>
 
 #define WATCHDOG_NAME "w83627hf/thf/hg WDT"
@@ -57,22 +57,26 @@ MODULE_PARM_DESC(wdt_io, "w83627hf/thf WDT io port (default 0x2E)");
 
 static int timeout = WATCHDOG_TIMEOUT;	/* in seconds */
 module_param(timeout, int, 0);
-MODULE_PARM_DESC(timeout, "Watchdog timeout in seconds. 1<= timeout <=255, default=" __MODULE_STRING(WATCHDOG_TIMEOUT) ".");
+MODULE_PARM_DESC(timeout,
+		"Watchdog timeout in seconds. 1 <= timeout <= 255, default="
+				__MODULE_STRING(WATCHDOG_TIMEOUT) ".");
 
 static int nowayout = WATCHDOG_NOWAYOUT;
 module_param(nowayout, int, 0);
-MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=" __MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
+MODULE_PARM_DESC(nowayout,
+		"Watchdog cannot be stopped once started (default="
+				__MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
 
 /*
  *	Kernel methods.
  */
 
 #define WDT_EFER (wdt_io+0)   /* Extended Function Enable Registers */
-#define WDT_EFIR (wdt_io+0)   /* Extended Function Index Register (same as EFER) */
+#define WDT_EFIR (wdt_io+0)   /* Extended Function Index Register
+							(same as EFER) */
 #define WDT_EFDR (WDT_EFIR+1) /* Extended Function Data Register */
 
-static void
-w83627hf_select_wd_register(void)
+static void w83627hf_select_wd_register(void)
 {
 	unsigned char c;
 	outb_p(0x87, WDT_EFER); /* Enter extended function mode */
@@ -93,43 +97,45 @@ w83627hf_select_wd_register(void)
 	outb_p(0x01, WDT_EFDR); /* set bit 0 to activate GPIO2 */
 }
 
-static void
-w83627hf_unselect_wd_register(void)
+static void w83627hf_unselect_wd_register(void)
 {
 	outb_p(0xAA, WDT_EFER); /* Leave extended function mode */
 }
 
 /* tyan motherboards seem to set F5 to 0x4C ?
  * So explicitly init to appropriate value. */
-static void
-w83627hf_init(void)
+
+static void w83627hf_init(void)
 {
 	unsigned char t;
 
 	w83627hf_select_wd_register();
 
 	outb_p(0xF6, WDT_EFER); /* Select CRF6 */
-	t=inb_p(WDT_EFDR);      /* read CRF6 */
+	t = inb_p(WDT_EFDR);      /* read CRF6 */
 	if (t != 0) {
-		printk (KERN_INFO PFX "Watchdog already running. Resetting timeout to %d sec\n", timeout);
+		printk(KERN_INFO PFX
+		     "Watchdog already running. Resetting timeout to %d sec\n",
+								timeout);
 		outb_p(timeout, WDT_EFDR);    /* Write back to CRF6 */
 	}
 
 	outb_p(0xF5, WDT_EFER); /* Select CRF5 */
-	t=inb_p(WDT_EFDR);      /* read CRF5 */
-	t&=~0x0C;               /* set second mode & disable keyboard turning off watchdog */
+	t = inb_p(WDT_EFDR);      /* read CRF5 */
+	t &= ~0x0C;               /* set second mode & disable keyboard
+				    turning off watchdog */
 	outb_p(t, WDT_EFDR);    /* Write back to CRF5 */
 
 	outb_p(0xF7, WDT_EFER); /* Select CRF7 */
-	t=inb_p(WDT_EFDR);      /* read CRF7 */
-	t&=~0xC0;               /* disable keyboard & mouse turning off watchdog */
+	t = inb_p(WDT_EFDR);      /* read CRF7 */
+	t &= ~0xC0;               /* disable keyboard & mouse turning off
+				    watchdog */
 	outb_p(t, WDT_EFDR);    /* Write back to CRF7 */
 
 	w83627hf_unselect_wd_register();
 }
 
-static void
-wdt_ctrl(int timeout)
+static void wdt_ctrl(int timeout)
 {
 	spin_lock(&io_lock);
 
@@ -143,32 +149,28 @@ wdt_ctrl(int timeout)
 	spin_unlock(&io_lock);
 }
 
-static int
-wdt_ping(void)
+static int wdt_ping(void)
 {
 	wdt_ctrl(timeout);
 	return 0;
 }
 
-static int
-wdt_disable(void)
+static int wdt_disable(void)
 {
 	wdt_ctrl(0);
 	return 0;
 }
 
-static int
-wdt_set_heartbeat(int t)
+static int wdt_set_heartbeat(int t)
 {
-	if ((t < 1) || (t > 255))
+	if (t < 1 || t > 255)
 		return -EINVAL;
-
 	timeout = t;
 	return 0;
 }
 
-static ssize_t
-wdt_write(struct file *file, const char __user *buf, size_t count, loff_t *ppos)
+static ssize_t wdt_write(struct file *file, const char __user *buf,
+						size_t count, loff_t *ppos)
 {
 	if (count) {
 		if (!nowayout) {
@@ -178,7 +180,7 @@ wdt_write(struct file *file, const char __user *buf, size_t count, loff_t *ppos)
 
 			for (i = 0; i != count; i++) {
 				char c;
-				if (get_user(c, buf+i))
+				if (get_user(c, buf + i))
 					return -EFAULT;
 				if (c == 'V')
 					expect_close = 42;
@@ -189,72 +191,61 @@ wdt_write(struct file *file, const char __user *buf, size_t count, loff_t *ppos)
 	return count;
 }
 
-static int
-wdt_ioctl(struct inode *inode, struct file *file, unsigned int cmd,
-	  unsigned long arg)
+static long wdt_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
 {
 	void __user *argp = (void __user *)arg;
 	int __user *p = argp;
 	int new_timeout;
 	static struct watchdog_info ident = {
-		.options = WDIOF_KEEPALIVEPING | WDIOF_SETTIMEOUT | WDIOF_MAGICCLOSE,
+		.options = WDIOF_KEEPALIVEPING | WDIOF_SETTIMEOUT |
+							WDIOF_MAGICCLOSE,
 		.firmware_version = 1,
 		.identity = "W83627HF WDT",
 	};
 
 	switch (cmd) {
 	case WDIOC_GETSUPPORT:
-	  if (copy_to_user(argp, &ident, sizeof(ident)))
-	    return -EFAULT;
-	  break;
-
+		if (copy_to_user(argp, &ident, sizeof(ident)))
+			return -EFAULT;
+		break;
 	case WDIOC_GETSTATUS:
 	case WDIOC_GETBOOTSTATUS:
-	  return put_user(0, p);
-
-	case WDIOC_KEEPALIVE:
-	  wdt_ping();
-	  break;
-
-	case WDIOC_SETTIMEOUT:
-	  if (get_user(new_timeout, p))
-		  return -EFAULT;
-	  if (wdt_set_heartbeat(new_timeout))
-		  return -EINVAL;
-	  wdt_ping();
-	  /* Fall */
-
-	case WDIOC_GETTIMEOUT:
-	  return put_user(timeout, p);
-
+		return put_user(0, p);
 	case WDIOC_SETOPTIONS:
 	{
-	  int options, retval = -EINVAL;
-
-	  if (get_user(options, p))
-	    return -EFAULT;
-
-	  if (options & WDIOS_DISABLECARD) {
-	    wdt_disable();
-	    retval = 0;
-	  }
-
-	  if (options & WDIOS_ENABLECARD) {
-	    wdt_ping();
-	    retval = 0;
-	  }
+		int options, retval = -EINVAL;
 
-	  return retval;
+		if (get_user(options, p))
+			return -EFAULT;
+		if (options & WDIOS_DISABLECARD) {
+			wdt_disable();
+			retval = 0;
+		}
+		if (options & WDIOS_ENABLECARD) {
+			wdt_ping();
+			retval = 0;
+		}
+		return retval;
 	}
-
+	case WDIOC_KEEPALIVE:
+		wdt_ping();
+		break;
+	case WDIOC_SETTIMEOUT:
+		if (get_user(new_timeout, p))
+			return -EFAULT;
+		if (wdt_set_heartbeat(new_timeout))
+			return -EINVAL;
+		wdt_ping();
+		/* Fall */
+	case WDIOC_GETTIMEOUT:
+		return put_user(timeout, p);
 	default:
-	  return -ENOTTY;
+		return -ENOTTY;
 	}
 	return 0;
 }
 
-static int
-wdt_open(struct inode *inode, struct file *file)
+static int wdt_open(struct inode *inode, struct file *file)
 {
 	if (test_and_set_bit(0, &wdt_is_open))
 		return -EBUSY;
@@ -266,13 +257,13 @@ wdt_open(struct inode *inode, struct file *file)
 	return nonseekable_open(inode, file);
 }
 
-static int
-wdt_close(struct inode *inode, struct file *file)
+static int wdt_close(struct inode *inode, struct file *file)
 {
-	if (expect_close == 42) {
+	if (expect_close == 42)
 		wdt_disable();
-	} else {
-		printk(KERN_CRIT PFX "Unexpected close, not stopping watchdog!\n");
+	else {
+		printk(KERN_CRIT PFX
+			"Unexpected close, not stopping watchdog!\n");
 		wdt_ping();
 	}
 	expect_close = 0;
@@ -284,14 +275,12 @@ wdt_close(struct inode *inode, struct file *file)
  *	Notifier for system down
  */
 
-static int
-wdt_notify_sys(struct notifier_block *this, unsigned long code,
+static int wdt_notify_sys(struct notifier_block *this, unsigned long code,
 	void *unused)
 {
-	if (code == SYS_DOWN || code == SYS_HALT) {
-		/* Turn the WDT off */
-		wdt_disable();
-	}
+	if (code == SYS_DOWN || code == SYS_HALT)
+		wdt_disable();	/* Turn the WDT off */
+
 	return NOTIFY_DONE;
 }
 
@@ -303,7 +292,7 @@ static const struct file_operations wdt_fops = {
 	.owner		= THIS_MODULE,
 	.llseek		= no_llseek,
 	.write		= wdt_write,
-	.ioctl		= wdt_ioctl,
+	.unlocked_ioctl	= wdt_ioctl,
 	.open		= wdt_open,
 	.release	= wdt_close,
 };
@@ -323,8 +312,7 @@ static struct notifier_block wdt_notifier = {
 	.notifier_call = wdt_notify_sys,
 };
 
-static int __init
-wdt_init(void)
+static int __init wdt_init(void)
 {
 	int ret;
 
@@ -332,12 +320,13 @@ wdt_init(void)
 
 	if (wdt_set_heartbeat(timeout)) {
 		wdt_set_heartbeat(WATCHDOG_TIMEOUT);
-		printk (KERN_INFO PFX "timeout value must be 1<=timeout<=255, using %d\n",
-			WATCHDOG_TIMEOUT);
+		printk(KERN_INFO PFX
+		     "timeout value must be 1 <= timeout <= 255, using %d\n",
+				WATCHDOG_TIMEOUT);
 	}
 
 	if (!request_region(wdt_io, 1, WATCHDOG_NAME)) {
-		printk (KERN_ERR PFX "I/O address 0x%04x already in use\n",
+		printk(KERN_ERR PFX "I/O address 0x%04x already in use\n",
 			wdt_io);
 		ret = -EIO;
 		goto out;
@@ -347,20 +336,22 @@ wdt_init(void)
 
 	ret = register_reboot_notifier(&wdt_notifier);
 	if (ret != 0) {
-		printk (KERN_ERR PFX "cannot register reboot notifier (err=%d)\n",
-			ret);
+		printk(KERN_ERR PFX
+			"cannot register reboot notifier (err=%d)\n", ret);
 		goto unreg_regions;
 	}
 
 	ret = misc_register(&wdt_miscdev);
 	if (ret != 0) {
-		printk (KERN_ERR PFX "cannot register miscdev on minor=%d (err=%d)\n",
-			WATCHDOG_MINOR, ret);
+		printk(KERN_ERR PFX
+			"cannot register miscdev on minor=%d (err=%d)\n",
+							WATCHDOG_MINOR, ret);
 		goto unreg_reboot;
 	}
 
-	printk (KERN_INFO PFX "initialized. timeout=%d sec (nowayout=%d)\n",
-		timeout, nowayout);
+	printk(KERN_INFO PFX
+			"initialized. timeout=%d sec (nowayout=%d)\n",
+							timeout, nowayout);
 
 out:
 	return ret;
@@ -371,12 +362,11 @@ unreg_regions:
 	goto out;
 }
 
-static void __exit
-wdt_exit(void)
+static void __exit wdt_exit(void)
 {
 	misc_deregister(&wdt_miscdev);
 	unregister_reboot_notifier(&wdt_notifier);
-	release_region(wdt_io,1);
+	release_region(wdt_io, 1);
 }
 
 module_init(wdt_init);
diff --git a/drivers/watchdog/w83697hf_wdt.c b/drivers/watchdog/w83697hf_wdt.c
index 528b882420b6..445d30a01ed3 100644
--- a/drivers/watchdog/w83697hf_wdt.c
+++ b/drivers/watchdog/w83697hf_wdt.c
@@ -36,9 +36,9 @@
 #include <linux/reboot.h>
 #include <linux/init.h>
 #include <linux/spinlock.h>
+#include <linux/io.h>
+#include <linux/uaccess.h>
 
-#include <asm/io.h>
-#include <asm/uaccess.h>
 #include <asm/system.h>
 
 #define WATCHDOG_NAME "w83697hf/hg WDT"
@@ -53,37 +53,43 @@ static DEFINE_SPINLOCK(io_lock);
 /* You must set this - there is no sane way to probe for this board. */
 static int wdt_io = 0x2e;
 module_param(wdt_io, int, 0);
-MODULE_PARM_DESC(wdt_io, "w83697hf/hg WDT io port (default 0x2e, 0 = autodetect)");
+MODULE_PARM_DESC(wdt_io,
+		"w83697hf/hg WDT io port (default 0x2e, 0 = autodetect)");
 
 static int timeout = WATCHDOG_TIMEOUT;	/* in seconds */
 module_param(timeout, int, 0);
-MODULE_PARM_DESC(timeout, "Watchdog timeout in seconds. 1<= timeout <=255 (default=" __MODULE_STRING(WATCHDOG_TIMEOUT) ")");
+MODULE_PARM_DESC(timeout,
+	"Watchdog timeout in seconds. 1<= timeout <=255 (default="
+				__MODULE_STRING(WATCHDOG_TIMEOUT) ")");
 
 static int nowayout = WATCHDOG_NOWAYOUT;
 module_param(nowayout, int, 0);
-MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=" __MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
+MODULE_PARM_DESC(nowayout,
+	"Watchdog cannot be stopped once started (default="
+				__MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
 
 static int early_disable = WATCHDOG_EARLY_DISABLE;
 module_param(early_disable, int, 0);
-MODULE_PARM_DESC(early_disable, "Watchdog gets disabled at boot time (default=" __MODULE_STRING(WATCHDOG_EARLY_DISABLE) ")");
+MODULE_PARM_DESC(early_disable,
+	"Watchdog gets disabled at boot time (default="
+				__MODULE_STRING(WATCHDOG_EARLY_DISABLE) ")");
 
 /*
  *	Kernel methods.
  */
 
-#define W83697HF_EFER (wdt_io+0)	/* Extended Function Enable Register */
-#define W83697HF_EFIR (wdt_io+0)	/* Extended Function Index Register (same as EFER) */
-#define W83697HF_EFDR (wdt_io+1)	/* Extended Function Data Register */
+#define W83697HF_EFER (wdt_io + 0)  /* Extended Function Enable Register */
+#define W83697HF_EFIR (wdt_io + 0)  /* Extended Function Index Register
+							(same as EFER) */
+#define W83697HF_EFDR (wdt_io + 1)  /* Extended Function Data Register */
 
-static inline void
-w83697hf_unlock(void)
+static inline void w83697hf_unlock(void)
 {
 	outb_p(0x87, W83697HF_EFER);	/* Enter extended function mode */
 	outb_p(0x87, W83697HF_EFER);	/* Again according to manual */
 }
 
-static inline void
-w83697hf_lock(void)
+static inline void w83697hf_lock(void)
 {
 	outb_p(0xAA, W83697HF_EFER);	/* Leave extended function mode */
 }
@@ -93,41 +99,36 @@ w83697hf_lock(void)
  *	w83697hf_write_timeout() must be called with the device unlocked.
  */
 
-static unsigned char
-w83697hf_get_reg(unsigned char reg)
+static unsigned char w83697hf_get_reg(unsigned char reg)
 {
 	outb_p(reg, W83697HF_EFIR);
 	return inb_p(W83697HF_EFDR);
 }
 
-static void
-w83697hf_set_reg(unsigned char reg, unsigned char data)
+static void w83697hf_set_reg(unsigned char reg, unsigned char data)
 {
 	outb_p(reg, W83697HF_EFIR);
 	outb_p(data, W83697HF_EFDR);
 }
 
-static void
-w83697hf_write_timeout(int timeout)
+static void w83697hf_write_timeout(int timeout)
 {
-	w83697hf_set_reg(0xF4, timeout);	/* Write Timeout counter to CRF4 */
+	/* Write Timeout counter to CRF4 */
+	w83697hf_set_reg(0xF4, timeout);
 }
 
-static void
-w83697hf_select_wdt(void)
+static void w83697hf_select_wdt(void)
 {
 	w83697hf_unlock();
 	w83697hf_set_reg(0x07, 0x08);	/* Switch to logic device 8 (GPIO2) */
 }
 
-static inline void
-w83697hf_deselect_wdt(void)
+static inline void w83697hf_deselect_wdt(void)
 {
 	w83697hf_lock();
 }
 
-static void
-w83697hf_init(void)
+static void w83697hf_init(void)
 {
 	unsigned char bbuf;
 
@@ -136,7 +137,9 @@ w83697hf_init(void)
 	bbuf = w83697hf_get_reg(0x29);
 	bbuf &= ~0x60;
 	bbuf |= 0x20;
-	w83697hf_set_reg(0x29, bbuf);	/* Set pin 119 to WDTO# mode (= CR29, WDT0) */
+
+	/* Set pin 119 to WDTO# mode (= CR29, WDT0) */
+	w83697hf_set_reg(0x29, bbuf);
 
 	bbuf = w83697hf_get_reg(0xF3);
 	bbuf &= ~0x04;
@@ -145,8 +148,7 @@ w83697hf_init(void)
 	w83697hf_deselect_wdt();
 }
 
-static void
-wdt_ping(void)
+static void wdt_ping(void)
 {
 	spin_lock(&io_lock);
 	w83697hf_select_wdt();
@@ -157,8 +159,7 @@ wdt_ping(void)
 	spin_unlock(&io_lock);
 }
 
-static void
-wdt_enable(void)
+static void wdt_enable(void)
 {
 	spin_lock(&io_lock);
 	w83697hf_select_wdt();
@@ -170,8 +171,7 @@ wdt_enable(void)
 	spin_unlock(&io_lock);
 }
 
-static void
-wdt_disable(void)
+static void wdt_disable(void)
 {
 	spin_lock(&io_lock);
 	w83697hf_select_wdt();
@@ -183,8 +183,7 @@ wdt_disable(void)
 	spin_unlock(&io_lock);
 }
 
-static unsigned char
-wdt_running(void)
+static unsigned char wdt_running(void)
 {
 	unsigned char t;
 
@@ -199,18 +198,17 @@ wdt_running(void)
 	return t;
 }
 
-static int
-wdt_set_heartbeat(int t)
+static int wdt_set_heartbeat(int t)
 {
-	if ((t < 1) || (t > 255))
+	if (t < 1 || t > 255)
 		return -EINVAL;
 
 	timeout = t;
 	return 0;
 }
 
-static ssize_t
-wdt_write(struct file *file, const char __user *buf, size_t count, loff_t *ppos)
+static ssize_t wdt_write(struct file *file, const char __user *buf,
+						size_t count, loff_t *ppos)
 {
 	if (count) {
 		if (!nowayout) {
@@ -220,7 +218,7 @@ wdt_write(struct file *file, const char __user *buf, size_t count, loff_t *ppos)
 
 			for (i = 0; i != count; i++) {
 				char c;
-				if (get_user(c, buf+i))
+				if (get_user(c, buf + i))
 					return -EFAULT;
 				if (c == 'V')
 					expect_close = 42;
@@ -231,15 +229,14 @@ wdt_write(struct file *file, const char __user *buf, size_t count, loff_t *ppos)
 	return count;
 }
 
-static int
-wdt_ioctl(struct inode *inode, struct file *file, unsigned int cmd,
-	  unsigned long arg)
+static long wdt_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
 {
 	void __user *argp = (void __user *)arg;
 	int __user *p = argp;
 	int new_timeout;
-	static struct watchdog_info ident = {
-		.options = WDIOF_KEEPALIVEPING | WDIOF_SETTIMEOUT | WDIOF_MAGICCLOSE,
+	static const struct watchdog_info ident = {
+		.options = WDIOF_KEEPALIVEPING | WDIOF_SETTIMEOUT
+							| WDIOF_MAGICCLOSE,
 		.firmware_version = 1,
 		.identity = "W83697HF WDT",
 	};
@@ -254,21 +251,6 @@ wdt_ioctl(struct inode *inode, struct file *file, unsigned int cmd,
 	case WDIOC_GETBOOTSTATUS:
 		return put_user(0, p);
 
-	case WDIOC_KEEPALIVE:
-		wdt_ping();
-		break;
-
-	case WDIOC_SETTIMEOUT:
-		if (get_user(new_timeout, p))
-			return -EFAULT;
-		if (wdt_set_heartbeat(new_timeout))
-			return -EINVAL;
-		wdt_ping();
-		/* Fall */
-
-	case WDIOC_GETTIMEOUT:
-		return put_user(timeout, p);
-
 	case WDIOC_SETOPTIONS:
 	{
 		int options, retval = -EINVAL;
@@ -289,14 +271,28 @@ wdt_ioctl(struct inode *inode, struct file *file, unsigned int cmd,
 		return retval;
 	}
 
+	case WDIOC_KEEPALIVE:
+		wdt_ping();
+		break;
+
+	case WDIOC_SETTIMEOUT:
+		if (get_user(new_timeout, p))
+			return -EFAULT;
+		if (wdt_set_heartbeat(new_timeout))
+			return -EINVAL;
+		wdt_ping();
+		/* Fall */
+
+	case WDIOC_GETTIMEOUT:
+		return put_user(timeout, p);
+
 	default:
 		return -ENOTTY;
 	}
 	return 0;
 }
 
-static int
-wdt_open(struct inode *inode, struct file *file)
+static int wdt_open(struct inode *inode, struct file *file)
 {
 	if (test_and_set_bit(0, &wdt_is_open))
 		return -EBUSY;
@@ -308,13 +304,13 @@ wdt_open(struct inode *inode, struct file *file)
 	return nonseekable_open(inode, file);
 }
 
-static int
-wdt_close(struct inode *inode, struct file *file)
+static int wdt_close(struct inode *inode, struct file *file)
 {
-	if (expect_close == 42) {
+	if (expect_close == 42)
 		wdt_disable();
-	} else {
-		printk (KERN_CRIT PFX "Unexpected close, not stopping watchdog!\n");
+	else {
+		printk(KERN_CRIT PFX
+			"Unexpected close, not stopping watchdog!\n");
 		wdt_ping();
 	}
 	expect_close = 0;
@@ -326,14 +322,12 @@ wdt_close(struct inode *inode, struct file *file)
  *	Notifier for system down
  */
 
-static int
-wdt_notify_sys(struct notifier_block *this, unsigned long code,
+static int wdt_notify_sys(struct notifier_block *this, unsigned long code,
 	void *unused)
 {
-	if (code == SYS_DOWN || code == SYS_HALT) {
-		/* Turn the WDT off */
-		wdt_disable();
-	}
+	if (code == SYS_DOWN || code == SYS_HALT)
+		wdt_disable();	/* Turn the WDT off */
+
 	return NOTIFY_DONE;
 }
 
@@ -345,7 +339,7 @@ static const struct file_operations wdt_fops = {
 	.owner		= THIS_MODULE,
 	.llseek		= no_llseek,
 	.write		= wdt_write,
-	.ioctl		= wdt_ioctl,
+	.unlocked_ioctl	= wdt_ioctl,
 	.open		= wdt_open,
 	.release	= wdt_close,
 };
@@ -365,36 +359,38 @@ static struct notifier_block wdt_notifier = {
 	.notifier_call = wdt_notify_sys,
 };
 
-static int
-w83697hf_check_wdt(void)
+static int w83697hf_check_wdt(void)
 {
 	if (!request_region(wdt_io, 2, WATCHDOG_NAME)) {
-		printk (KERN_ERR PFX "I/O address 0x%x already in use\n", wdt_io);
+		printk(KERN_ERR PFX
+			"I/O address 0x%x already in use\n", wdt_io);
 		return -EIO;
 	}
 
-	printk (KERN_DEBUG PFX "Looking for watchdog at address 0x%x\n", wdt_io);
+	printk(KERN_DEBUG PFX
+			"Looking for watchdog at address 0x%x\n", wdt_io);
 	w83697hf_unlock();
 	if (w83697hf_get_reg(0x20) == 0x60) {
-		printk (KERN_INFO PFX "watchdog found at address 0x%x\n", wdt_io);
+		printk(KERN_INFO PFX
+			"watchdog found at address 0x%x\n", wdt_io);
 		w83697hf_lock();
 		return 0;
 	}
-	w83697hf_lock();	/* Reprotect in case it was a compatible device */
+	/* Reprotect in case it was a compatible device */
+	w83697hf_lock();
 
-	printk (KERN_INFO PFX "watchdog not found at address 0x%x\n", wdt_io);
+	printk(KERN_INFO PFX "watchdog not found at address 0x%x\n", wdt_io);
 	release_region(wdt_io, 2);
 	return -EIO;
 }
 
 static int w83697hf_ioports[] = { 0x2e, 0x4e, 0x00 };
 
-static int __init
-wdt_init(void)
+static int __init wdt_init(void)
 {
 	int ret, i, found = 0;
 
-	printk (KERN_INFO PFX "WDT driver for W83697HF/HG initializing\n");
+	printk(KERN_INFO PFX "WDT driver for W83697HF/HG initializing\n");
 
 	if (wdt_io == 0) {
 		/* we will autodetect the W83697HF/HG watchdog */
@@ -409,7 +405,7 @@ wdt_init(void)
 	}
 
 	if (!found) {
-		printk (KERN_ERR PFX "No W83697HF/HG could be found\n");
+		printk(KERN_ERR PFX "No W83697HF/HG could be found\n");
 		ret = -EIO;
 		goto out;
 	}
@@ -417,31 +413,33 @@ wdt_init(void)
 	w83697hf_init();
 	if (early_disable) {
 		if (wdt_running())
-			printk (KERN_WARNING PFX "Stopping previously enabled watchdog until userland kicks in\n");
+			printk(KERN_WARNING PFX "Stopping previously enabled watchdog until userland kicks in\n");
 		wdt_disable();
 	}
 
 	if (wdt_set_heartbeat(timeout)) {
 		wdt_set_heartbeat(WATCHDOG_TIMEOUT);
-		printk (KERN_INFO PFX "timeout value must be 1<=timeout<=255, using %d\n",
-			WATCHDOG_TIMEOUT);
+		printk(KERN_INFO PFX
+		     "timeout value must be 1 <= timeout <= 255, using %d\n",
+							WATCHDOG_TIMEOUT);
 	}
 
 	ret = register_reboot_notifier(&wdt_notifier);
 	if (ret != 0) {
-		printk (KERN_ERR PFX "cannot register reboot notifier (err=%d)\n",
-			ret);
+		printk(KERN_ERR PFX
+			"cannot register reboot notifier (err=%d)\n", ret);
 		goto unreg_regions;
 	}
 
 	ret = misc_register(&wdt_miscdev);
 	if (ret != 0) {
-		printk (KERN_ERR PFX "cannot register miscdev on minor=%d (err=%d)\n",
-			WATCHDOG_MINOR, ret);
+		printk(KERN_ERR PFX
+			"cannot register miscdev on minor=%d (err=%d)\n",
+						WATCHDOG_MINOR, ret);
 		goto unreg_reboot;
 	}
 
-	printk (KERN_INFO PFX "initialized. timeout=%d sec (nowayout=%d)\n",
+	printk(KERN_INFO PFX "initialized. timeout=%d sec (nowayout=%d)\n",
 		timeout, nowayout);
 
 out:
@@ -453,8 +451,7 @@ unreg_regions:
 	goto out;
 }
 
-static void __exit
-wdt_exit(void)
+static void __exit wdt_exit(void)
 {
 	misc_deregister(&wdt_miscdev);
 	unregister_reboot_notifier(&wdt_notifier);
diff --git a/drivers/watchdog/w83877f_wdt.c b/drivers/watchdog/w83877f_wdt.c
index f510a3a595e6..24587d2060c4 100644
--- a/drivers/watchdog/w83877f_wdt.c
+++ b/drivers/watchdog/w83877f_wdt.c
@@ -23,13 +23,16 @@
  *                            Added KERN_* tags to printks
  *                            add CONFIG_WATCHDOG_NOWAYOUT support
  *                            fix possible wdt_is_open race
- *                            changed watchdog_info to correctly reflect what the driver offers
- *                            added WDIOC_GETSTATUS, WDIOC_GETBOOTSTATUS, WDIOC_SETTIMEOUT,
+ *                            changed watchdog_info to correctly reflect what
+ *			      the driver offers
+ *                            added WDIOC_GETSTATUS, WDIOC_GETBOOTSTATUS,
+ *			      WDIOC_SETTIMEOUT,
  *                            WDIOC_GETTIMEOUT, and WDIOC_SETOPTIONS ioctls
  *           09/8 - 2003      [wim@iguana.be] cleanup of trailing spaces
  *                            added extra printk's for startup problems
  *                            use module_param
- *                            made timeout (the emulated heartbeat) a module_param
+ *                            made timeout (the emulated heartbeat) a
+ *			      module_param
  *                            made the keepalive ping an internal subroutine
  *
  *  This WDT driver is different from most other Linux WDT
@@ -51,8 +54,8 @@
 #include <linux/notifier.h>
 #include <linux/reboot.h>
 #include <linux/init.h>
-#include <asm/io.h>
-#include <asm/uaccess.h>
+#include <linux/io.h>
+#include <linux/uaccess.h>
 #include <asm/system.h>
 
 #define OUR_NAME "w83877f_wdt"
@@ -80,14 +83,19 @@
  */
 
 #define WATCHDOG_TIMEOUT 30            /* 30 sec default timeout */
-static int timeout = WATCHDOG_TIMEOUT; /* in seconds, will be multiplied by HZ to get seconds to wait for a ping */
+/* in seconds, will be multiplied by HZ to get seconds to wait for a ping */
+static int timeout = WATCHDOG_TIMEOUT;
 module_param(timeout, int, 0);
-MODULE_PARM_DESC(timeout, "Watchdog timeout in seconds. (1<=timeout<=3600, default=" __MODULE_STRING(WATCHDOG_TIMEOUT) ")");
+MODULE_PARM_DESC(timeout,
+	"Watchdog timeout in seconds. (1<=timeout<=3600, default="
+				__MODULE_STRING(WATCHDOG_TIMEOUT) ")");
 
 
 static int nowayout = WATCHDOG_NOWAYOUT;
 module_param(nowayout, int, 0);
-MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=" __MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
+MODULE_PARM_DESC(nowayout,
+		"Watchdog cannot be stopped once started (default="
+				__MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
 
 static void wdt_timer_ping(unsigned long);
 static DEFINE_TIMER(timer, wdt_timer_ping, 0, 0);
@@ -105,8 +113,7 @@ static void wdt_timer_ping(unsigned long data)
 	/* If we got a heartbeat pulse within the WDT_US_INTERVAL
 	 * we agree to ping the WDT
 	 */
-	if(time_before(jiffies, next_heartbeat))
-	{
+	if (time_before(jiffies, next_heartbeat)) {
 		/* Ping the WDT */
 		spin_lock(&wdt_spinlock);
 
@@ -118,9 +125,9 @@ static void wdt_timer_ping(unsigned long data)
 
 		spin_unlock(&wdt_spinlock);
 
-	} else {
-		printk(KERN_WARNING PFX "Heartbeat lost! Will not ping the watchdog\n");
-	}
+	} else
+		printk(KERN_WARNING PFX
+			"Heartbeat lost! Will not ping the watchdog\n");
 }
 
 /*
@@ -181,22 +188,21 @@ static void wdt_keepalive(void)
  * /dev/watchdog handling
  */
 
-static ssize_t fop_write(struct file * file, const char __user * buf, size_t count, loff_t * ppos)
+static ssize_t fop_write(struct file *file, const char __user *buf,
+						size_t count, loff_t *ppos)
 {
 	/* See if we got the magic character 'V' and reload the timer */
-	if(count)
-	{
-		if (!nowayout)
-		{
+	if (count) {
+		if (!nowayout) {
 			size_t ofs;
 
-			/* note: just in case someone wrote the magic character
-			 * five months ago... */
+			/* note: just in case someone wrote the magic
+			   character five months ago... */
 			wdt_expect_close = 0;
 
-			/* scan to see whether or not we got the magic character */
-			for(ofs = 0; ofs != count; ofs++)
-			{
+			/* scan to see whether or not we got the
+			   magic character */
+			for (ofs = 0; ofs != count; ofs++) {
 				char c;
 				if (get_user(c, buf + ofs))
 					return -EFAULT;
@@ -211,10 +217,10 @@ static ssize_t fop_write(struct file * file, const char __user * buf, size_t cou
 	return count;
 }
 
-static int fop_open(struct inode * inode, struct file * file)
+static int fop_open(struct inode *inode, struct file *file)
 {
 	/* Just in case we're already talking to someone... */
-	if(test_and_set_bit(0, &wdt_is_open))
+	if (test_and_set_bit(0, &wdt_is_open))
 		return -EBUSY;
 
 	/* Good, fire up the show */
@@ -222,78 +228,78 @@ static int fop_open(struct inode * inode, struct file * file)
 	return nonseekable_open(inode, file);
 }
 
-static int fop_close(struct inode * inode, struct file * file)
+static int fop_close(struct inode *inode, struct file *file)
 {
-	if(wdt_expect_close == 42)
+	if (wdt_expect_close == 42)
 		wdt_turnoff();
 	else {
 		del_timer(&timer);
-		printk(KERN_CRIT PFX "device file closed unexpectedly. Will not stop the WDT!\n");
+		printk(KERN_CRIT PFX
+		  "device file closed unexpectedly. Will not stop the WDT!\n");
 	}
 	clear_bit(0, &wdt_is_open);
 	wdt_expect_close = 0;
 	return 0;
 }
 
-static int fop_ioctl(struct inode *inode, struct file *file, unsigned int cmd,
-	unsigned long arg)
+static long fop_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
 {
 	void __user *argp = (void __user *)arg;
 	int __user *p = argp;
-	static struct watchdog_info ident=
-	{
-		.options = WDIOF_KEEPALIVEPING | WDIOF_SETTIMEOUT | WDIOF_MAGICCLOSE,
+	static const struct watchdog_info ident = {
+		.options = WDIOF_KEEPALIVEPING | WDIOF_SETTIMEOUT
+							| WDIOF_MAGICCLOSE,
 		.firmware_version = 1,
 		.identity = "W83877F",
 	};
 
-	switch(cmd)
+	switch (cmd) {
+	case WDIOC_GETSUPPORT:
+		return copy_to_user(argp, &ident, sizeof(ident)) ? -EFAULT : 0;
+	case WDIOC_GETSTATUS:
+	case WDIOC_GETBOOTSTATUS:
+		return put_user(0, p);
+	case WDIOC_SETOPTIONS:
 	{
-		default:
-			return -ENOTTY;
-		case WDIOC_GETSUPPORT:
-			return copy_to_user(argp, &ident, sizeof(ident))?-EFAULT:0;
-		case WDIOC_GETSTATUS:
-		case WDIOC_GETBOOTSTATUS:
-			return put_user(0, p);
-		case WDIOC_KEEPALIVE:
-			wdt_keepalive();
-			return 0;
-		case WDIOC_SETOPTIONS:
-		{
-			int new_options, retval = -EINVAL;
-
-			if(get_user(new_options, p))
-				return -EFAULT;
-
-			if(new_options & WDIOS_DISABLECARD) {
-				wdt_turnoff();
-				retval = 0;
-			}
+		int new_options, retval = -EINVAL;
 
-			if(new_options & WDIOS_ENABLECARD) {
-				wdt_startup();
-				retval = 0;
-			}
+		if (get_user(new_options, p))
+			return -EFAULT;
 
-			return retval;
+		if (new_options & WDIOS_DISABLECARD) {
+			wdt_turnoff();
+			retval = 0;
 		}
-		case WDIOC_SETTIMEOUT:
-		{
-			int new_timeout;
 
-			if(get_user(new_timeout, p))
-				return -EFAULT;
+		if (new_options & WDIOS_ENABLECARD) {
+			wdt_startup();
+			retval = 0;
+		}
 
-			if(new_timeout < 1 || new_timeout > 3600) /* arbitrary upper limit */
-				return -EINVAL;
+		return retval;
+	}
+	case WDIOC_KEEPALIVE:
+		wdt_keepalive();
+		return 0;
+	case WDIOC_SETTIMEOUT:
+	{
+		int new_timeout;
 
-			timeout = new_timeout;
-			wdt_keepalive();
-			/* Fall through */
-		}
-		case WDIOC_GETTIMEOUT:
-			return put_user(timeout, p);
+		if (get_user(new_timeout, p))
+			return -EFAULT;
+
+		/* arbitrary upper limit */
+		if (new_timeout < 1 || new_timeout > 3600)
+			return -EINVAL;
+
+		timeout = new_timeout;
+		wdt_keepalive();
+		/* Fall through */
+	}
+	case WDIOC_GETTIMEOUT:
+		return put_user(timeout, p);
+	default:
+		return -ENOTTY;
 	}
 }
 
@@ -303,7 +309,7 @@ static const struct file_operations wdt_fops = {
 	.write		= fop_write,
 	.open		= fop_open,
 	.release	= fop_close,
-	.ioctl		= fop_ioctl,
+	.unlocked_ioctl	= fop_ioctl,
 };
 
 static struct miscdevice wdt_miscdev = {
@@ -319,7 +325,7 @@ static struct miscdevice wdt_miscdev = {
 static int wdt_notify_sys(struct notifier_block *this, unsigned long code,
 	void *unused)
 {
-	if(code==SYS_DOWN || code==SYS_HALT)
+	if (code == SYS_DOWN || code == SYS_HALT)
 		wdt_turnoff();
 	return NOTIFY_DONE;
 }
@@ -329,8 +335,7 @@ static int wdt_notify_sys(struct notifier_block *this, unsigned long code,
  *	turn the timebomb registers off.
  */
 
-static struct notifier_block wdt_notifier=
-{
+static struct notifier_block wdt_notifier = {
 	.notifier_call = wdt_notify_sys,
 };
 
@@ -342,31 +347,29 @@ static void __exit w83877f_wdt_unload(void)
 	misc_deregister(&wdt_miscdev);
 
 	unregister_reboot_notifier(&wdt_notifier);
-	release_region(WDT_PING,1);
-	release_region(ENABLE_W83877F_PORT,2);
+	release_region(WDT_PING, 1);
+	release_region(ENABLE_W83877F_PORT, 2);
 }
 
 static int __init w83877f_wdt_init(void)
 {
 	int rc = -EBUSY;
 
-	if(timeout < 1 || timeout > 3600) /* arbitrary upper limit */
-	{
+	if (timeout < 1 || timeout > 3600) { /* arbitrary upper limit */
 		timeout = WATCHDOG_TIMEOUT;
-		printk(KERN_INFO PFX "timeout value must be 1<=x<=3600, using %d\n",
-			timeout);
+		printk(KERN_INFO PFX
+			"timeout value must be 1 <= x <= 3600, using %d\n",
+							timeout);
 	}
 
-	if (!request_region(ENABLE_W83877F_PORT, 2, "W83877F WDT"))
-	{
+	if (!request_region(ENABLE_W83877F_PORT, 2, "W83877F WDT")) {
 		printk(KERN_ERR PFX "I/O address 0x%04x already in use\n",
 			ENABLE_W83877F_PORT);
 		rc = -EIO;
 		goto err_out;
 	}
 
-	if (!request_region(WDT_PING, 1, "W8387FF WDT"))
-	{
+	if (!request_region(WDT_PING, 1, "W8387FF WDT")) {
 		printk(KERN_ERR PFX "I/O address 0x%04x already in use\n",
 			WDT_PING);
 		rc = -EIO;
@@ -374,22 +377,22 @@ static int __init w83877f_wdt_init(void)
 	}
 
 	rc = register_reboot_notifier(&wdt_notifier);
-	if (rc)
-	{
-		printk(KERN_ERR PFX "cannot register reboot notifier (err=%d)\n",
-			rc);
+	if (rc) {
+		printk(KERN_ERR PFX
+			"cannot register reboot notifier (err=%d)\n", rc);
 		goto err_out_region2;
 	}
 
 	rc = misc_register(&wdt_miscdev);
-	if (rc)
-	{
-		printk(KERN_ERR PFX "cannot register miscdev on minor=%d (err=%d)\n",
-			wdt_miscdev.minor, rc);
+	if (rc) {
+		printk(KERN_ERR PFX
+			"cannot register miscdev on minor=%d (err=%d)\n",
+							wdt_miscdev.minor, rc);
 		goto err_out_reboot;
 	}
 
-	printk(KERN_INFO PFX "WDT driver for W83877F initialised. timeout=%d sec (nowayout=%d)\n",
+	printk(KERN_INFO PFX
+	  "WDT driver for W83877F initialised. timeout=%d sec (nowayout=%d)\n",
 		timeout, nowayout);
 
 	return 0;
@@ -397,9 +400,9 @@ static int __init w83877f_wdt_init(void)
 err_out_reboot:
 	unregister_reboot_notifier(&wdt_notifier);
 err_out_region2:
-	release_region(WDT_PING,1);
+	release_region(WDT_PING, 1);
 err_out_region1:
-	release_region(ENABLE_W83877F_PORT,2);
+	release_region(ENABLE_W83877F_PORT, 2);
 err_out:
 	return rc;
 }
diff --git a/drivers/watchdog/w83977f_wdt.c b/drivers/watchdog/w83977f_wdt.c
index b209bcd7f789..2525da5080ca 100644
--- a/drivers/watchdog/w83977f_wdt.c
+++ b/drivers/watchdog/w83977f_wdt.c
@@ -26,10 +26,10 @@
 #include <linux/watchdog.h>
 #include <linux/notifier.h>
 #include <linux/reboot.h>
+#include <linux/uaccess.h>
+#include <linux/io.h>
 
-#include <asm/io.h>
 #include <asm/system.h>
-#include <asm/uaccess.h>
 
 #define WATCHDOG_VERSION  "1.00"
 #define WATCHDOG_NAME     "W83977F WDT"
@@ -53,13 +53,17 @@ static	char expect_close;
 static	DEFINE_SPINLOCK(spinlock);
 
 module_param(timeout, int, 0);
-MODULE_PARM_DESC(timeout,"Watchdog timeout in seconds (15..7635), default=" __MODULE_STRING(DEFAULT_TIMEOUT) ")");
+MODULE_PARM_DESC(timeout,
+		"Watchdog timeout in seconds (15..7635), default="
+				__MODULE_STRING(DEFAULT_TIMEOUT) ")");
 module_param(testmode, int, 0);
-MODULE_PARM_DESC(testmode,"Watchdog testmode (1 = no reboot), default=0");
+MODULE_PARM_DESC(testmode, "Watchdog testmode (1 = no reboot), default=0");
 
 static int nowayout = WATCHDOG_NOWAYOUT;
 module_param(nowayout, int, 0);
-MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=" __MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
+MODULE_PARM_DESC(nowayout,
+		"Watchdog cannot be stopped once started (default="
+				__MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
 
 /*
  * Start the watchdog
@@ -72,8 +76,8 @@ static int wdt_start(void)
 	spin_lock_irqsave(&spinlock, flags);
 
 	/* Unlock the SuperIO chip */
-	outb_p(UNLOCK_DATA,IO_INDEX_PORT);
-	outb_p(UNLOCK_DATA,IO_INDEX_PORT);
+	outb_p(UNLOCK_DATA, IO_INDEX_PORT);
+	outb_p(UNLOCK_DATA, IO_INDEX_PORT);
 
 	/*
 	 * Select device Aux2 (device=8) to set watchdog regs F2, F3 and F4.
@@ -81,50 +85,49 @@ static int wdt_start(void)
 	 * F3 is set to enable watchdog LED blink at timeout.
 	 * F4 is used to just clear the TIMEOUT'ed state (bit 0).
 	 */
-	outb_p(DEVICE_REGISTER,IO_INDEX_PORT);
-	outb_p(0x08,IO_DATA_PORT);
-	outb_p(0xF2,IO_INDEX_PORT);
-	outb_p(timeoutW,IO_DATA_PORT);
-	outb_p(0xF3,IO_INDEX_PORT);
-	outb_p(0x08,IO_DATA_PORT);
-	outb_p(0xF4,IO_INDEX_PORT);
-	outb_p(0x00,IO_DATA_PORT);
+	outb_p(DEVICE_REGISTER, IO_INDEX_PORT);
+	outb_p(0x08, IO_DATA_PORT);
+	outb_p(0xF2, IO_INDEX_PORT);
+	outb_p(timeoutW, IO_DATA_PORT);
+	outb_p(0xF3, IO_INDEX_PORT);
+	outb_p(0x08, IO_DATA_PORT);
+	outb_p(0xF4, IO_INDEX_PORT);
+	outb_p(0x00, IO_DATA_PORT);
 
 	/* Set device Aux2 active */
-	outb_p(0x30,IO_INDEX_PORT);
-	outb_p(0x01,IO_DATA_PORT);
+	outb_p(0x30, IO_INDEX_PORT);
+	outb_p(0x01, IO_DATA_PORT);
 
-	/* 
+	/*
 	 * Select device Aux1 (dev=7) to set GP16 as the watchdog output
 	 * (in reg E6) and GP13 as the watchdog LED output (in reg E3).
 	 * Map GP16 at pin 119.
 	 * In test mode watch the bit 0 on F4 to indicate "triggered" or
 	 * check watchdog LED on SBC.
 	 */
-	outb_p(DEVICE_REGISTER,IO_INDEX_PORT);
-	outb_p(0x07,IO_DATA_PORT);
-	if (!testmode)
-	{
+	outb_p(DEVICE_REGISTER, IO_INDEX_PORT);
+	outb_p(0x07, IO_DATA_PORT);
+	if (!testmode) {
 		unsigned pin_map;
 
-		outb_p(0xE6,IO_INDEX_PORT);
-		outb_p(0x0A,IO_DATA_PORT);
-		outb_p(0x2C,IO_INDEX_PORT);
+		outb_p(0xE6, IO_INDEX_PORT);
+		outb_p(0x0A, IO_DATA_PORT);
+		outb_p(0x2C, IO_INDEX_PORT);
 		pin_map = inb_p(IO_DATA_PORT);
 		pin_map |= 0x10;
 		pin_map &= ~(0x20);
-		outb_p(0x2C,IO_INDEX_PORT);
-		outb_p(pin_map,IO_DATA_PORT);
+		outb_p(0x2C, IO_INDEX_PORT);
+		outb_p(pin_map, IO_DATA_PORT);
 	}
-	outb_p(0xE3,IO_INDEX_PORT);
-	outb_p(0x08,IO_DATA_PORT);
+	outb_p(0xE3, IO_INDEX_PORT);
+	outb_p(0x08, IO_DATA_PORT);
 
 	/* Set device Aux1 active */
-	outb_p(0x30,IO_INDEX_PORT);
-	outb_p(0x01,IO_DATA_PORT);
+	outb_p(0x30, IO_INDEX_PORT);
+	outb_p(0x01, IO_DATA_PORT);
 
 	/* Lock the SuperIO chip */
-	outb_p(LOCK_DATA,IO_INDEX_PORT);
+	outb_p(LOCK_DATA, IO_INDEX_PORT);
 
 	spin_unlock_irqrestore(&spinlock, flags);
 
@@ -144,42 +147,41 @@ static int wdt_stop(void)
 	spin_lock_irqsave(&spinlock, flags);
 
 	/* Unlock the SuperIO chip */
-	outb_p(UNLOCK_DATA,IO_INDEX_PORT);
-	outb_p(UNLOCK_DATA,IO_INDEX_PORT);
+	outb_p(UNLOCK_DATA, IO_INDEX_PORT);
+	outb_p(UNLOCK_DATA, IO_INDEX_PORT);
 
-	/* 
+	/*
 	 * Select device Aux2 (device=8) to set watchdog regs F2, F3 and F4.
 	 * F2 is reset to its default value (watchdog timer disabled).
 	 * F3 is reset to its default state.
 	 * F4 clears the TIMEOUT'ed state (bit 0) - back to default.
 	 */
-	outb_p(DEVICE_REGISTER,IO_INDEX_PORT);
-	outb_p(0x08,IO_DATA_PORT);
-	outb_p(0xF2,IO_INDEX_PORT);
-	outb_p(0xFF,IO_DATA_PORT);
-	outb_p(0xF3,IO_INDEX_PORT);
-	outb_p(0x00,IO_DATA_PORT);
-	outb_p(0xF4,IO_INDEX_PORT);
-	outb_p(0x00,IO_DATA_PORT);
-	outb_p(0xF2,IO_INDEX_PORT);
-	outb_p(0x00,IO_DATA_PORT);
+	outb_p(DEVICE_REGISTER, IO_INDEX_PORT);
+	outb_p(0x08, IO_DATA_PORT);
+	outb_p(0xF2, IO_INDEX_PORT);
+	outb_p(0xFF, IO_DATA_PORT);
+	outb_p(0xF3, IO_INDEX_PORT);
+	outb_p(0x00, IO_DATA_PORT);
+	outb_p(0xF4, IO_INDEX_PORT);
+	outb_p(0x00, IO_DATA_PORT);
+	outb_p(0xF2, IO_INDEX_PORT);
+	outb_p(0x00, IO_DATA_PORT);
 
 	/*
-	 * Select device Aux1 (dev=7) to set GP16 (in reg E6) and 
+	 * Select device Aux1 (dev=7) to set GP16 (in reg E6) and
 	 * Gp13 (in reg E3) as inputs.
 	 */
-	outb_p(DEVICE_REGISTER,IO_INDEX_PORT);
-	outb_p(0x07,IO_DATA_PORT);
-	if (!testmode)
-	{
-		outb_p(0xE6,IO_INDEX_PORT);
-		outb_p(0x01,IO_DATA_PORT);
+	outb_p(DEVICE_REGISTER, IO_INDEX_PORT);
+	outb_p(0x07, IO_DATA_PORT);
+	if (!testmode) {
+		outb_p(0xE6, IO_INDEX_PORT);
+		outb_p(0x01, IO_DATA_PORT);
 	}
-	outb_p(0xE3,IO_INDEX_PORT);
-	outb_p(0x01,IO_DATA_PORT);
+	outb_p(0xE3, IO_INDEX_PORT);
+	outb_p(0x01, IO_DATA_PORT);
 
 	/* Lock the SuperIO chip */
-	outb_p(LOCK_DATA,IO_INDEX_PORT);
+	outb_p(LOCK_DATA, IO_INDEX_PORT);
 
 	spin_unlock_irqrestore(&spinlock, flags);
 
@@ -200,17 +202,17 @@ static int wdt_keepalive(void)
 	spin_lock_irqsave(&spinlock, flags);
 
 	/* Unlock the SuperIO chip */
-	outb_p(UNLOCK_DATA,IO_INDEX_PORT);
-	outb_p(UNLOCK_DATA,IO_INDEX_PORT);
+	outb_p(UNLOCK_DATA, IO_INDEX_PORT);
+	outb_p(UNLOCK_DATA, IO_INDEX_PORT);
 
 	/* Select device Aux2 (device=8) to kick watchdog reg F2 */
-	outb_p(DEVICE_REGISTER,IO_INDEX_PORT);
-	outb_p(0x08,IO_DATA_PORT);
-	outb_p(0xF2,IO_INDEX_PORT);
-	outb_p(timeoutW,IO_DATA_PORT);
+	outb_p(DEVICE_REGISTER, IO_INDEX_PORT);
+	outb_p(0x08, IO_DATA_PORT);
+	outb_p(0xF2, IO_INDEX_PORT);
+	outb_p(timeoutW, IO_DATA_PORT);
 
 	/* Lock the SuperIO chip */
-	outb_p(LOCK_DATA,IO_INDEX_PORT);
+	outb_p(LOCK_DATA, IO_INDEX_PORT);
 
 	spin_unlock_irqrestore(&spinlock, flags);
 
@@ -227,7 +229,7 @@ static int wdt_set_timeout(int t)
 
 	/*
 	 * Convert seconds to watchdog counter time units, rounding up.
-	 * On PCM-5335 watchdog units are 30 seconds/step with 15 sec startup 
+	 * On PCM-5335 watchdog units are 30 seconds/step with 15 sec startup
 	 * value. This information is supplied in the PCM-5335 manual and was
 	 * checked by me on a real board. This is a bit strange because W83977f
 	 * datasheet says counter unit is in minutes!
@@ -241,7 +243,7 @@ static int wdt_set_timeout(int t)
 		return -EINVAL;
 
 	/*
-	 * timeout is the timeout in seconds, 
+	 * timeout is the timeout in seconds,
 	 * timeoutW is the timeout in watchdog counter units.
 	 */
 	timeoutW = tmrval;
@@ -261,17 +263,17 @@ static int wdt_get_status(int *status)
 	spin_lock_irqsave(&spinlock, flags);
 
 	/* Unlock the SuperIO chip */
-	outb_p(UNLOCK_DATA,IO_INDEX_PORT);
-	outb_p(UNLOCK_DATA,IO_INDEX_PORT);
+	outb_p(UNLOCK_DATA, IO_INDEX_PORT);
+	outb_p(UNLOCK_DATA, IO_INDEX_PORT);
 
 	/* Select device Aux2 (device=8) to read watchdog reg F4 */
-	outb_p(DEVICE_REGISTER,IO_INDEX_PORT);
-	outb_p(0x08,IO_DATA_PORT);
-	outb_p(0xF4,IO_INDEX_PORT);
+	outb_p(DEVICE_REGISTER, IO_INDEX_PORT);
+	outb_p(0x08, IO_DATA_PORT);
+	outb_p(0xF4, IO_INDEX_PORT);
 	new_status = inb_p(IO_DATA_PORT);
 
 	/* Lock the SuperIO chip */
-	outb_p(LOCK_DATA,IO_INDEX_PORT);
+	outb_p(LOCK_DATA, IO_INDEX_PORT);
 
 	spin_unlock_irqrestore(&spinlock, flags);
 
@@ -290,7 +292,7 @@ static int wdt_get_status(int *status)
 static int wdt_open(struct inode *inode, struct file *file)
 {
 	/* If the watchdog is alive we don't need to start it again */
-	if( test_and_set_bit(0, &timer_alive) )
+	if (test_and_set_bit(0, &timer_alive))
 		return -EBUSY;
 
 	if (nowayout)
@@ -306,13 +308,13 @@ static int wdt_release(struct inode *inode, struct file *file)
 	 * Shut off the timer.
 	 * Lock it in if it's a module and we set nowayout
 	 */
-	if (expect_close == 42)
-	{
+	if (expect_close == 42) {
 		wdt_stop();
 		clear_bit(0, &timer_alive);
 	} else {
 		wdt_keepalive();
-		printk(KERN_CRIT PFX "unexpected close, not stopping watchdog!\n");
+		printk(KERN_CRIT PFX
+			"unexpected close, not stopping watchdog!\n");
 	}
 	expect_close = 0;
 	return 0;
@@ -333,24 +335,22 @@ static ssize_t wdt_write(struct file *file, const char __user *buf,
 			    size_t count, loff_t *ppos)
 {
 	/* See if we got the magic character 'V' and reload the timer */
-	if(count)
-	{
-		if (!nowayout)
-		{
+	if (count) {
+		if (!nowayout) {
 			size_t ofs;
 
-			/* note: just in case someone wrote the magic character long ago */
+			/* note: just in case someone wrote the
+			   magic character long ago */
 			expect_close = 0;
 
-			/* scan to see whether or not we got the magic character */
-			for(ofs = 0; ofs != count; ofs++)
-			{
+			/* scan to see whether or not we got the
+			   magic character */
+			for (ofs = 0; ofs != count; ofs++) {
 				char c;
 				if (get_user(c, buf + ofs))
 					return -EFAULT;
-				if (c == 'V') {
+				if (c == 'V')
 					expect_close = 42;
-				}
 			}
 		}
 
@@ -377,8 +377,7 @@ static struct watchdog_info ident = {
 	.identity = WATCHDOG_NAME,
 };
 
-static int wdt_ioctl(struct inode *inode, struct file *file,
-	unsigned int cmd, unsigned long arg)
+static long wdt_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
 {
 	int status;
 	int new_options, retval = -EINVAL;
@@ -390,13 +389,10 @@ static int wdt_ioctl(struct inode *inode, struct file *file,
 
 	uarg.i = (int __user *)arg;
 
-	switch(cmd)
-	{
-	default:
-		return -ENOTTY;
-
+	switch (cmd) {
 	case WDIOC_GETSUPPORT:
-		return copy_to_user(uarg.ident, &ident, sizeof(ident)) ? -EFAULT : 0;
+		return copy_to_user(uarg.ident, &ident,
+						sizeof(ident)) ? -EFAULT : 0;
 
 	case WDIOC_GETSTATUS:
 		wdt_get_status(&status);
@@ -405,12 +401,8 @@ static int wdt_ioctl(struct inode *inode, struct file *file,
 	case WDIOC_GETBOOTSTATUS:
 		return put_user(0, uarg.i);
 
-	case WDIOC_KEEPALIVE:
-		wdt_keepalive();
-		return 0;
-
 	case WDIOC_SETOPTIONS:
-		if (get_user (new_options, uarg.i))
+		if (get_user(new_options, uarg.i))
 			return -EFAULT;
 
 		if (new_options & WDIOS_DISABLECARD) {
@@ -425,6 +417,10 @@ static int wdt_ioctl(struct inode *inode, struct file *file,
 
 		return retval;
 
+	case WDIOC_KEEPALIVE:
+		wdt_keepalive();
+		return 0;
+
 	case WDIOC_SETTIMEOUT:
 		if (get_user(new_timeout, uarg.i))
 			return -EFAULT;
@@ -438,29 +434,30 @@ static int wdt_ioctl(struct inode *inode, struct file *file,
 	case WDIOC_GETTIMEOUT:
 		return put_user(timeout, uarg.i);
 
+	default:
+		return -ENOTTY;
+
 	}
 }
 
 static int wdt_notify_sys(struct notifier_block *this, unsigned long code,
 	void *unused)
 {
-	if (code==SYS_DOWN || code==SYS_HALT)
+	if (code == SYS_DOWN || code == SYS_HALT)
 		wdt_stop();
 	return NOTIFY_DONE;
 }
 
-static const struct file_operations wdt_fops=
-{
+static const struct file_operations wdt_fops = {
 	.owner		= THIS_MODULE,
 	.llseek		= no_llseek,
 	.write		= wdt_write,
-	.ioctl		= wdt_ioctl,
+	.unlocked_ioctl	= wdt_ioctl,
 	.open		= wdt_open,
 	.release	= wdt_release,
 };
 
-static struct miscdevice wdt_miscdev=
-{
+static struct miscdevice wdt_miscdev = {
 	.minor		= WATCHDOG_MINOR,
 	.name		= "watchdog",
 	.fops		= &wdt_fops,
@@ -474,20 +471,20 @@ static int __init w83977f_wdt_init(void)
 {
 	int rc;
 
-        printk(KERN_INFO PFX DRIVER_VERSION);
+	printk(KERN_INFO PFX DRIVER_VERSION);
 
 	/*
-	 * Check that the timeout value is within it's range ; 
+	 * Check that the timeout value is within it's range;
 	 * if not reset to the default
 	 */
 	if (wdt_set_timeout(timeout)) {
 		wdt_set_timeout(DEFAULT_TIMEOUT);
-		printk(KERN_INFO PFX "timeout value must be 15<=timeout<=7635, using %d\n",
-			DEFAULT_TIMEOUT);
+		printk(KERN_INFO PFX
+		    "timeout value must be 15 <= timeout <= 7635, using %d\n",
+							DEFAULT_TIMEOUT);
 	}
 
-	if (!request_region(IO_INDEX_PORT, 2, WATCHDOG_NAME))
-	{
+	if (!request_region(IO_INDEX_PORT, 2, WATCHDOG_NAME)) {
 		printk(KERN_ERR PFX "I/O address 0x%04x already in use\n",
 			IO_INDEX_PORT);
 		rc = -EIO;
@@ -495,30 +492,30 @@ static int __init w83977f_wdt_init(void)
 	}
 
 	rc = register_reboot_notifier(&wdt_notifier);
-	if (rc)
-	{
-		printk(KERN_ERR PFX "cannot register reboot notifier (err=%d)\n",
-			rc);
+	if (rc) {
+		printk(KERN_ERR PFX
+			"cannot register reboot notifier (err=%d)\n", rc);
 		goto err_out_region;
 	}
 
 	rc = misc_register(&wdt_miscdev);
-	if (rc)
-	{
-		printk(KERN_ERR PFX "cannot register miscdev on minor=%d (err=%d)\n",
-			wdt_miscdev.minor, rc);
+	if (rc) {
+		printk(KERN_ERR PFX
+			"cannot register miscdev on minor=%d (err=%d)\n",
+						wdt_miscdev.minor, rc);
 		goto err_out_reboot;
 	}
 
-	printk(KERN_INFO PFX "initialized. timeout=%d sec (nowayout=%d testmode=%d)\n",
-		timeout, nowayout, testmode);
+	printk(KERN_INFO PFX
+		"initialized. timeout=%d sec (nowayout=%d testmode=%d)\n",
+					timeout, nowayout, testmode);
 
 	return 0;
 
 err_out_reboot:
 	unregister_reboot_notifier(&wdt_notifier);
 err_out_region:
-	release_region(IO_INDEX_PORT,2);
+	release_region(IO_INDEX_PORT, 2);
 err_out:
 	return rc;
 }
@@ -528,7 +525,7 @@ static void __exit w83977f_wdt_exit(void)
 	wdt_stop();
 	misc_deregister(&wdt_miscdev);
 	unregister_reboot_notifier(&wdt_notifier);
-	release_region(IO_INDEX_PORT,2);
+	release_region(IO_INDEX_PORT, 2);
 }
 
 module_init(w83977f_wdt_init);
diff --git a/drivers/watchdog/wafer5823wdt.c b/drivers/watchdog/wafer5823wdt.c
index 9e368091f799..68377ae171ff 100644
--- a/drivers/watchdog/wafer5823wdt.c
+++ b/drivers/watchdog/wafer5823wdt.c
@@ -1,11 +1,11 @@
 /*
  *	ICP Wafer 5823 Single Board Computer WDT driver
- *      http://www.icpamerica.com/wafer_5823.php
- *      May also work on other similar models
+ *	http://www.icpamerica.com/wafer_5823.php
+ *	May also work on other similar models
  *
  *	(c) Copyright 2002 Justin Cormack <justin@street-vision.com>
  *
- *      Release 0.02
+ *	Release 0.02
  *
  *	Based on advantechwdt.c which is based on wdt.c.
  *	Original copyright messages:
@@ -36,8 +36,8 @@
 #include <linux/reboot.h>
 #include <linux/init.h>
 #include <linux/spinlock.h>
-#include <asm/io.h>
-#include <asm/uaccess.h>
+#include <linux/io.h>
+#include <linux/uaccess.h>
 
 #define WATCHDOG_NAME "Wafer 5823 WDT"
 #define PFX WATCHDOG_NAME ": "
@@ -50,10 +50,10 @@ static DEFINE_SPINLOCK(wafwdt_lock);
 /*
  *	You must set these - there is no sane way to probe for this board.
  *
- *      To enable, write the timeout value in seconds (1 to 255) to I/O
- *      port WDT_START, then read the port to start the watchdog. To pat
- *      the dog, read port WDT_STOP to stop the timer, then read WDT_START
- *      to restart it again.
+ *	To enable, write the timeout value in seconds (1 to 255) to I/O
+ *	port WDT_START, then read the port to start the watchdog. To pat
+ *	the dog, read port WDT_STOP to stop the timer, then read WDT_START
+ *	to restart it again.
  */
 
 static int wdt_stop = 0x843;
@@ -61,11 +61,15 @@ static int wdt_start = 0x443;
 
 static int timeout = WD_TIMO;  /* in seconds */
 module_param(timeout, int, 0);
-MODULE_PARM_DESC(timeout, "Watchdog timeout in seconds. 1<= timeout <=255, default=" __MODULE_STRING(WD_TIMO) ".");
+MODULE_PARM_DESC(timeout,
+		"Watchdog timeout in seconds. 1 <= timeout <= 255, default="
+				__MODULE_STRING(WD_TIMO) ".");
 
 static int nowayout = WATCHDOG_NOWAYOUT;
 module_param(nowayout, int, 0);
-MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=" __MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
+MODULE_PARM_DESC(nowayout,
+		"Watchdog cannot be stopped once started (default="
+				__MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
 
 static void wafwdt_ping(void)
 {
@@ -83,14 +87,14 @@ static void wafwdt_start(void)
 	inb_p(wdt_start);
 }
 
-static void
-wafwdt_stop(void)
+static void wafwdt_stop(void)
 {
 	/* stop watchdog */
 	inb_p(wdt_stop);
 }
 
-static ssize_t wafwdt_write(struct file *file, const char __user *buf, size_t count, loff_t * ppos)
+static ssize_t wafwdt_write(struct file *file, const char __user *buf,
+						size_t count, loff_t *ppos)
 {
 	/* See if we got the magic character 'V' and reload the timer */
 	if (count) {
@@ -100,7 +104,8 @@ static ssize_t wafwdt_write(struct file *file, const char __user *buf, size_t co
 			/* In case it was set long ago */
 			expect_close = 0;
 
-			/* scan to see whether or not we got the magic character */
+			/* scan to see whether or not we got the magic
+			   character */
 			for (i = 0; i != count; i++) {
 				char c;
 				if (get_user(c, buf + i))
@@ -109,27 +114,29 @@ static ssize_t wafwdt_write(struct file *file, const char __user *buf, size_t co
 					expect_close = 42;
 			}
 		}
-		/* Well, anyhow someone wrote to us, we should return that favour */
+		/* Well, anyhow someone wrote to us, we should
+		   return that favour */
 		wafwdt_ping();
 	}
 	return count;
 }
 
-static int wafwdt_ioctl(struct inode *inode, struct file *file, unsigned int cmd,
-	     unsigned long arg)
+static long wafwdt_ioctl(struct file *file, unsigned int cmd,
+							unsigned long arg)
 {
 	int new_timeout;
 	void __user *argp = (void __user *)arg;
 	int __user *p = argp;
-	static struct watchdog_info ident = {
-		.options = WDIOF_KEEPALIVEPING | WDIOF_SETTIMEOUT | WDIOF_MAGICCLOSE,
+	static const struct watchdog_info ident = {
+		.options = WDIOF_KEEPALIVEPING | WDIOF_SETTIMEOUT |
+							WDIOF_MAGICCLOSE,
 		.firmware_version = 1,
 		.identity = "Wafer 5823 WDT",
 	};
 
 	switch (cmd) {
 	case WDIOC_GETSUPPORT:
-		if (copy_to_user(argp, &ident, sizeof (ident)))
+		if (copy_to_user(argp, &ident, sizeof(ident)))
 			return -EFAULT;
 		break;
 
@@ -137,22 +144,6 @@ static int wafwdt_ioctl(struct inode *inode, struct file *file, unsigned int cmd
 	case WDIOC_GETBOOTSTATUS:
 		return put_user(0, p);
 
-	case WDIOC_KEEPALIVE:
-		wafwdt_ping();
-		break;
-
-	case WDIOC_SETTIMEOUT:
-		if (get_user(new_timeout, p))
-			return -EFAULT;
-		if ((new_timeout < 1) || (new_timeout > 255))
-			return -EINVAL;
-		timeout = new_timeout;
-		wafwdt_stop();
-		wafwdt_start();
-		/* Fall */
-	case WDIOC_GETTIMEOUT:
-		return put_user(timeout, p);
-
 	case WDIOC_SETOPTIONS:
 	{
 		int options, retval = -EINVAL;
@@ -173,6 +164,22 @@ static int wafwdt_ioctl(struct inode *inode, struct file *file, unsigned int cmd
 		return retval;
 	}
 
+	case WDIOC_KEEPALIVE:
+		wafwdt_ping();
+		break;
+
+	case WDIOC_SETTIMEOUT:
+		if (get_user(new_timeout, p))
+			return -EFAULT;
+		if ((new_timeout < 1) || (new_timeout > 255))
+			return -EINVAL;
+		timeout = new_timeout;
+		wafwdt_stop();
+		wafwdt_start();
+		/* Fall */
+	case WDIOC_GETTIMEOUT:
+		return put_user(timeout, p);
+
 	default:
 		return -ENOTTY;
 	}
@@ -191,13 +198,13 @@ static int wafwdt_open(struct inode *inode, struct file *file)
 	return nonseekable_open(inode, file);
 }
 
-static int
-wafwdt_close(struct inode *inode, struct file *file)
+static int wafwdt_close(struct inode *inode, struct file *file)
 {
-	if (expect_close == 42) {
+	if (expect_close == 42)
 		wafwdt_stop();
-	} else {
-		printk(KERN_CRIT PFX "WDT device closed unexpectedly.  WDT will not stop!\n");
+	else {
+		printk(KERN_CRIT PFX
+		    "WDT device closed unexpectedly.  WDT will not stop!\n");
 		wafwdt_ping();
 	}
 	clear_bit(0, &wafwdt_is_open);
@@ -209,12 +216,11 @@ wafwdt_close(struct inode *inode, struct file *file)
  *	Notifier for system down
  */
 
-static int wafwdt_notify_sys(struct notifier_block *this, unsigned long code, void *unused)
+static int wafwdt_notify_sys(struct notifier_block *this, unsigned long code,
+								void *unused)
 {
-	if (code == SYS_DOWN || code == SYS_HALT) {
-		/* Turn the WDT off */
+	if (code == SYS_DOWN || code == SYS_HALT)
 		wafwdt_stop();
-	}
 	return NOTIFY_DONE;
 }
 
@@ -226,7 +232,7 @@ static const struct file_operations wafwdt_fops = {
 	.owner		= THIS_MODULE,
 	.llseek		= no_llseek,
 	.write		= wafwdt_write,
-	.ioctl		= wafwdt_ioctl,
+	.unlocked_ioctl	= wafwdt_ioctl,
 	.open		= wafwdt_open,
 	.release	= wafwdt_close,
 };
@@ -250,25 +256,28 @@ static int __init wafwdt_init(void)
 {
 	int ret;
 
-	printk(KERN_INFO "WDT driver for Wafer 5823 single board computer initialising.\n");
+	printk(KERN_INFO
+	  "WDT driver for Wafer 5823 single board computer initialising.\n");
 
 	if (timeout < 1 || timeout > 255) {
 		timeout = WD_TIMO;
-		printk (KERN_INFO PFX "timeout value must be 1<=x<=255, using %d\n",
-			timeout);
+		printk(KERN_INFO PFX
+			"timeout value must be 1 <= x <= 255, using %d\n",
+								timeout);
 	}
 
 	if (wdt_stop != wdt_start) {
-		if(!request_region(wdt_stop, 1, "Wafer 5823 WDT")) {
-			printk (KERN_ERR PFX "I/O address 0x%04x already in use\n",
-			wdt_stop);
+		if (!request_region(wdt_stop, 1, "Wafer 5823 WDT")) {
+			printk(KERN_ERR PFX
+				"I/O address 0x%04x already in use\n",
+								wdt_stop);
 			ret = -EIO;
 			goto error;
 		}
 	}
 
-	if(!request_region(wdt_start, 1, "Wafer 5823 WDT")) {
-		printk (KERN_ERR PFX "I/O address 0x%04x already in use\n",
+	if (!request_region(wdt_start, 1, "Wafer 5823 WDT")) {
+		printk(KERN_ERR PFX "I/O address 0x%04x already in use\n",
 			wdt_start);
 		ret = -EIO;
 		goto error2;
@@ -276,19 +285,20 @@ static int __init wafwdt_init(void)
 
 	ret = register_reboot_notifier(&wafwdt_notifier);
 	if (ret != 0) {
-		printk (KERN_ERR PFX "cannot register reboot notifier (err=%d)\n",
-			ret);
+		printk(KERN_ERR PFX
+			"cannot register reboot notifier (err=%d)\n", ret);
 		goto error3;
 	}
 
 	ret = misc_register(&wafwdt_miscdev);
 	if (ret != 0) {
-		printk (KERN_ERR PFX "cannot register miscdev on minor=%d (err=%d)\n",
-			WATCHDOG_MINOR, ret);
+		printk(KERN_ERR PFX
+			"cannot register miscdev on minor=%d (err=%d)\n",
+						WATCHDOG_MINOR, ret);
 		goto error4;
 	}
 
-	printk (KERN_INFO PFX "initialized. timeout=%d sec (nowayout=%d)\n",
+	printk(KERN_INFO PFX "initialized. timeout=%d sec (nowayout=%d)\n",
 		timeout, nowayout);
 
 	return ret;
@@ -307,7 +317,7 @@ static void __exit wafwdt_exit(void)
 {
 	misc_deregister(&wafwdt_miscdev);
 	unregister_reboot_notifier(&wafwdt_notifier);
-	if(wdt_stop != wdt_start)
+	if (wdt_stop != wdt_start)
 		release_region(wdt_stop, 1);
 	release_region(wdt_start, 1);
 }
diff --git a/drivers/watchdog/wd501p.h b/drivers/watchdog/wd501p.h
index a4504f40394d..db34853c28ae 100644
--- a/drivers/watchdog/wd501p.h
+++ b/drivers/watchdog/wd501p.h
@@ -12,7 +12,7 @@
  *	http://www.cymru.net
  *
  *	This driver is provided under the GNU General Public License, incorporated
- *	herein by reference. The driver is provided without warranty or 
+ *	herein by reference. The driver is provided without warranty or
  *	support.
  *
  *	Release 0.04.
diff --git a/drivers/watchdog/wdrtas.c b/drivers/watchdog/wdrtas.c
index 1d64e277567d..5d3b1a8e28b0 100644
--- a/drivers/watchdog/wdrtas.c
+++ b/drivers/watchdog/wdrtas.c
@@ -35,9 +35,9 @@
 #include <linux/reboot.h>
 #include <linux/types.h>
 #include <linux/watchdog.h>
+#include <linux/uaccess.h>
 
 #include <asm/rtas.h>
-#include <asm/uaccess.h>
 
 #define WDRTAS_MAGIC_CHAR		42
 #define WDRTAS_SUPPORTED_MASK		(WDIOF_SETTIMEOUT | \
@@ -56,7 +56,7 @@ static int wdrtas_nowayout = 0;
 #endif
 
 static atomic_t wdrtas_miscdev_open = ATOMIC_INIT(0);
-static char wdrtas_expect_close = 0;
+static char wdrtas_expect_close;
 
 static int wdrtas_interval;
 
@@ -86,8 +86,8 @@ static char wdrtas_logbuffer[WDRTAS_LOGBUFFER_LEN];
  * RTAS function set-indicator (surveillance). The unit of interval is
  * seconds.
  */
-static int
-wdrtas_set_interval(int interval)
+
+static int wdrtas_set_interval(int interval)
 {
 	long result;
 	static int print_msg = 10;
@@ -97,7 +97,7 @@ wdrtas_set_interval(int interval)
 
 	result = rtas_call(wdrtas_token_set_indicator, 3, 1, NULL,
 			   WDRTAS_SURVEILLANCE_IND, 0, interval);
-	if ( (result < 0) && (print_msg) ) {
+	if (result < 0 && print_msg) {
 		printk(KERN_ERR "wdrtas: setting the watchdog to %i "
 		       "timeout failed: %li\n", interval, result);
 		print_msg--;
@@ -116,16 +116,14 @@ wdrtas_set_interval(int interval)
  * as reported by the RTAS function ibm,get-system-parameter. The unit
  * of the return value is seconds.
  */
-static int
-wdrtas_get_interval(int fallback_value)
+static int wdrtas_get_interval(int fallback_value)
 {
 	long result;
 	char value[4];
 
 	result = rtas_call(wdrtas_token_get_sp, 3, 1, NULL,
 			   WDRTAS_SP_SPI, (void *)__pa(&value), 4);
-	if ( (value[0] != 0) || (value[1] != 2) || (value[3] != 0) ||
-	     (result < 0) ) {
+	if (value[0] != 0 || value[1] != 2 || value[3] != 0 || result < 0) {
 		printk(KERN_WARNING "wdrtas: could not get sp_spi watchdog "
 		       "timeout (%li). Continuing\n", result);
 		return fallback_value;
@@ -141,8 +139,7 @@ wdrtas_get_interval(int fallback_value)
  * wdrtas_timer_start starts the watchdog by calling the RTAS function
  * set-interval (surveillance)
  */
-static void
-wdrtas_timer_start(void)
+static void wdrtas_timer_start(void)
 {
 	wdrtas_set_interval(wdrtas_interval);
 }
@@ -153,8 +150,7 @@ wdrtas_timer_start(void)
  * wdrtas_timer_stop stops the watchdog timer by calling the RTAS function
  * set-interval (surveillance)
  */
-static void
-wdrtas_timer_stop(void)
+static void wdrtas_timer_stop(void)
 {
 	wdrtas_set_interval(0);
 }
@@ -165,8 +161,7 @@ wdrtas_timer_stop(void)
  * wdrtas_log_scanned_event prints a message to the log buffer dumping
  * the results of the last event-scan call
  */
-static void
-wdrtas_log_scanned_event(void)
+static void wdrtas_log_scanned_event(void)
 {
 	int i;
 
@@ -175,13 +170,13 @@ wdrtas_log_scanned_event(void)
 		       "%02x %02x %02x %02x  %02x %02x %02x %02x   "
 		       "%02x %02x %02x %02x  %02x %02x %02x %02x\n",
 		       (i / 16) + 1, (WDRTAS_LOGBUFFER_LEN / 16),
-		       wdrtas_logbuffer[i + 0], wdrtas_logbuffer[i + 1], 
-		       wdrtas_logbuffer[i + 2], wdrtas_logbuffer[i + 3], 
-		       wdrtas_logbuffer[i + 4], wdrtas_logbuffer[i + 5], 
-		       wdrtas_logbuffer[i + 6], wdrtas_logbuffer[i + 7], 
-		       wdrtas_logbuffer[i + 8], wdrtas_logbuffer[i + 9], 
-		       wdrtas_logbuffer[i + 10], wdrtas_logbuffer[i + 11], 
-		       wdrtas_logbuffer[i + 12], wdrtas_logbuffer[i + 13], 
+		       wdrtas_logbuffer[i + 0], wdrtas_logbuffer[i + 1],
+		       wdrtas_logbuffer[i + 2], wdrtas_logbuffer[i + 3],
+		       wdrtas_logbuffer[i + 4], wdrtas_logbuffer[i + 5],
+		       wdrtas_logbuffer[i + 6], wdrtas_logbuffer[i + 7],
+		       wdrtas_logbuffer[i + 8], wdrtas_logbuffer[i + 9],
+		       wdrtas_logbuffer[i + 10], wdrtas_logbuffer[i + 11],
+		       wdrtas_logbuffer[i + 12], wdrtas_logbuffer[i + 13],
 		       wdrtas_logbuffer[i + 14], wdrtas_logbuffer[i + 15]);
 }
 
@@ -192,8 +187,7 @@ wdrtas_log_scanned_event(void)
  * RTAS function event-scan and repeats these calls as long as there are
  * events available. All events will be dumped.
  */
-static void
-wdrtas_timer_keepalive(void)
+static void wdrtas_timer_keepalive(void)
 {
 	long result;
 
@@ -218,8 +212,7 @@ wdrtas_timer_keepalive(void)
  * wdrtas_get_temperature returns the current temperature in Fahrenheit. It
  * uses the RTAS call get-sensor-state, token 3 to do so
  */
-static int
-wdrtas_get_temperature(void)
+static int wdrtas_get_temperature(void)
 {
 	long result;
 	int temperature = 0;
@@ -243,8 +236,7 @@ wdrtas_get_temperature(void)
  * returns a bitmask of defines WDIOF_... as defined in
  * include/linux/watchdog.h
  */
-static int
-wdrtas_get_status(void)
+static int wdrtas_get_status(void)
 {
 	return 0; /* TODO */
 }
@@ -255,8 +247,7 @@ wdrtas_get_status(void)
  * returns a bitmask of defines WDIOF_... as defined in
  * include/linux/watchdog.h, indicating why the watchdog rebooted the system
  */
-static int
-wdrtas_get_boot_status(void)
+static int wdrtas_get_boot_status(void)
 {
 	return 0; /* TODO */
 }
@@ -276,8 +267,7 @@ wdrtas_get_boot_status(void)
  * character 'V'. This character allows the watchdog device to be closed
  * properly.
  */
-static ssize_t
-wdrtas_write(struct file *file, const char __user *buf,
+static ssize_t wdrtas_write(struct file *file, const char __user *buf,
 	     size_t len, loff_t *ppos)
 {
 	int i;
@@ -306,7 +296,6 @@ out:
 
 /**
  * wdrtas_ioctl - ioctl function for the watchdog device
- * @inode: inode structure
  * @file: file structure
  * @cmd: command for ioctl
  * @arg: argument pointer
@@ -315,16 +304,16 @@ out:
  *
  * wdrtas_ioctl implements the watchdog API ioctls
  */
-static int
-wdrtas_ioctl(struct inode *inode, struct file *file,
-	     unsigned int cmd, unsigned long arg)
+
+static long wdrtas_ioctl(struct file *file, unsigned int cmd,
+							unsigned long arg)
 {
 	int __user *argp = (void __user *)arg;
 	int i;
 	static struct watchdog_info wdinfo = {
 		.options = WDRTAS_SUPPORTED_MASK,
 		.firmware_version = 0,
-		.identity = "wdrtas"
+		.identity = "wdrtas",
 	};
 
 	switch (cmd) {
@@ -357,9 +346,9 @@ wdrtas_ioctl(struct inode *inode, struct file *file,
 			wdrtas_timer_keepalive();
 			wdrtas_timer_start();
 		}
+		/* not implemented. Done by H8
 		if (i & WDIOS_TEMPPANIC) {
-			/* not implemented. Done by H8 */
-		}
+		} */
 		return 0;
 
 	case WDIOC_KEEPALIVE:
@@ -399,8 +388,7 @@ wdrtas_ioctl(struct inode *inode, struct file *file,
  *
  * function called when watchdog device is opened
  */
-static int
-wdrtas_open(struct inode *inode, struct file *file)
+static int wdrtas_open(struct inode *inode, struct file *file)
 {
 	/* only open once */
 	if (atomic_inc_return(&wdrtas_miscdev_open) > 1) {
@@ -423,8 +411,7 @@ wdrtas_open(struct inode *inode, struct file *file)
  *
  * close function. Always succeeds
  */
-static int
-wdrtas_close(struct inode *inode, struct file *file)
+static int wdrtas_close(struct inode *inode, struct file *file)
 {
 	/* only stop watchdog, if this was announced using 'V' before */
 	if (wdrtas_expect_close == WDRTAS_MAGIC_CHAR)
@@ -453,8 +440,7 @@ wdrtas_close(struct inode *inode, struct file *file)
  * wdrtas_temp_read gives the temperature to the users by copying this
  * value as one byte into the user space buffer. The unit is Fahrenheit...
  */
-static ssize_t
-wdrtas_temp_read(struct file *file, char __user *buf,
+static ssize_t wdrtas_temp_read(struct file *file, char __user *buf,
 		 size_t count, loff_t *ppos)
 {
 	int temperature = 0;
@@ -478,8 +464,7 @@ wdrtas_temp_read(struct file *file, char __user *buf,
  *
  * function called when temperature device is opened
  */
-static int
-wdrtas_temp_open(struct inode *inode, struct file *file)
+static int wdrtas_temp_open(struct inode *inode, struct file *file)
 {
 	return nonseekable_open(inode, file);
 }
@@ -493,8 +478,7 @@ wdrtas_temp_open(struct inode *inode, struct file *file)
  *
  * close function. Always succeeds
  */
-static int
-wdrtas_temp_close(struct inode *inode, struct file *file)
+static int wdrtas_temp_close(struct inode *inode, struct file *file)
 {
 	return 0;
 }
@@ -509,10 +493,10 @@ wdrtas_temp_close(struct inode *inode, struct file *file)
  *
  * wdrtas_reboot stops the watchdog in case of a reboot
  */
-static int
-wdrtas_reboot(struct notifier_block *this, unsigned long code, void *ptr)
+static int wdrtas_reboot(struct notifier_block *this,
+					unsigned long code, void *ptr)
 {
-	if ( (code==SYS_DOWN) || (code==SYS_HALT) )
+	if (code == SYS_DOWN || code == SYS_HALT)
 		wdrtas_timer_stop();
 
 	return NOTIFY_DONE;
@@ -524,7 +508,7 @@ static const struct file_operations wdrtas_fops = {
 	.owner		= THIS_MODULE,
 	.llseek		= no_llseek,
 	.write		= wdrtas_write,
-	.ioctl		= wdrtas_ioctl,
+	.unlocked_ioctl	= wdrtas_ioctl,
 	.open		= wdrtas_open,
 	.release	= wdrtas_close,
 };
@@ -562,8 +546,7 @@ static struct notifier_block wdrtas_notifier = {
  * this watchdog driver. It tolerates, if "get-sensor-state" and
  * "ibm,get-system-parameter" are not available.
  */
-static int
-wdrtas_get_tokens(void)
+static int wdrtas_get_tokens(void)
 {
 	wdrtas_token_get_sensor_state = rtas_token("get-sensor-state");
 	if (wdrtas_token_get_sensor_state == RTAS_UNKNOWN_SERVICE) {
@@ -603,8 +586,7 @@ wdrtas_get_tokens(void)
  * wdrtas_register_devs unregisters the watchdog and temperature watchdog
  * misc devs
  */
-static void
-wdrtas_unregister_devs(void)
+static void wdrtas_unregister_devs(void)
 {
 	misc_deregister(&wdrtas_miscdev);
 	if (wdrtas_token_get_sensor_state != RTAS_UNKNOWN_SERVICE)
@@ -619,8 +601,7 @@ wdrtas_unregister_devs(void)
  * wdrtas_register_devs registers the watchdog and temperature watchdog
  * misc devs
  */
-static int
-wdrtas_register_devs(void)
+static int wdrtas_register_devs(void)
 {
 	int result;
 
@@ -651,8 +632,7 @@ wdrtas_register_devs(void)
  *
  * registers the file handlers and the reboot notifier
  */
-static int __init
-wdrtas_init(void)
+static int __init wdrtas_init(void)
 {
 	if (wdrtas_get_tokens())
 		return -ENODEV;
@@ -680,8 +660,7 @@ wdrtas_init(void)
  *
  * unregisters the file handlers and the reboot notifier
  */
-static void __exit
-wdrtas_exit(void)
+static void __exit wdrtas_exit(void)
 {
 	if (!wdrtas_nowayout)
 		wdrtas_timer_stop();
diff --git a/drivers/watchdog/wdt.c b/drivers/watchdog/wdt.c
index 756fb15fdce7..deeebb2b13ea 100644
--- a/drivers/watchdog/wdt.c
+++ b/drivers/watchdog/wdt.c
@@ -24,9 +24,10 @@
  *					Matt Crocker).
  *		Alan Cox	:	Added wdt= boot option
  *		Alan Cox	:	Cleaned up copy/user stuff
- *		Tim Hockin	:	Added insmod parameters, comment cleanup
- *					Parameterized timeout
- *		Tigran Aivazian	:	Restructured wdt_init() to handle failures
+ *		Tim Hockin	:	Added insmod parameters, comment
+ *					cleanup, parameterized timeout
+ *		Tigran Aivazian	:	Restructured wdt_init() to handle
+ *					failures
  *		Joel Becker	:	Added WDIOC_GET/SETTIMEOUT
  *		Matt Domsch	:	Added nowayout module option
  */
@@ -42,9 +43,9 @@
 #include <linux/notifier.h>
 #include <linux/reboot.h>
 #include <linux/init.h>
+#include <linux/io.h>
+#include <linux/uaccess.h>
 
-#include <asm/io.h>
-#include <asm/uaccess.h>
 #include <asm/system.h>
 #include "wd501p.h"
 
@@ -60,15 +61,19 @@ static char expect_close;
 static int heartbeat = WD_TIMO;
 static int wd_heartbeat;
 module_param(heartbeat, int, 0);
-MODULE_PARM_DESC(heartbeat, "Watchdog heartbeat in seconds. (0<heartbeat<65536, default=" __MODULE_STRING(WD_TIMO) ")");
+MODULE_PARM_DESC(heartbeat,
+	"Watchdog heartbeat in seconds. (0 < heartbeat < 65536, default="
+				__MODULE_STRING(WD_TIMO) ")");
 
 static int nowayout = WATCHDOG_NOWAYOUT;
 module_param(nowayout, int, 0);
-MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=" __MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
+MODULE_PARM_DESC(nowayout,
+	"Watchdog cannot be stopped once started (default="
+				__MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
 
 /* You must set these - there is no sane way to probe for this board. */
-static int io=0x240;
-static int irq=11;
+static int io = 0x240;
+static int irq = 11;
 
 static DEFINE_SPINLOCK(wdt_lock);
 
@@ -82,7 +87,8 @@ MODULE_PARM_DESC(irq, "WDT irq (default=11)");
 static int tachometer;
 
 module_param(tachometer, int, 0);
-MODULE_PARM_DESC(tachometer, "WDT501-P Fan Tachometer support (0=disable, default=0)");
+MODULE_PARM_DESC(tachometer,
+		"WDT501-P Fan Tachometer support (0=disable, default=0)");
 #endif /* CONFIG_WDT_501 */
 
 /*
@@ -91,9 +97,9 @@ MODULE_PARM_DESC(tachometer, "WDT501-P Fan Tachometer support (0=disable, defaul
 
 static void wdt_ctr_mode(int ctr, int mode)
 {
-	ctr<<=6;
-	ctr|=0x30;
-	ctr|=(mode<<1);
+	ctr <<= 6;
+	ctr |= 0x30;
+	ctr |= (mode << 1);
 	outb_p(ctr, WDT_CR);
 }
 
@@ -114,12 +120,15 @@ static int wdt_start(void)
 	unsigned long flags;
 	spin_lock_irqsave(&wdt_lock, flags);
 	inb_p(WDT_DC);			/* Disable watchdog */
-	wdt_ctr_mode(0,3);		/* Program CTR0 for Mode 3: Square Wave Generator */
-	wdt_ctr_mode(1,2);		/* Program CTR1 for Mode 2: Rate Generator */
-	wdt_ctr_mode(2,0);		/* Program CTR2 for Mode 0: Pulse on Terminal Count */
+	wdt_ctr_mode(0, 3);		/* Program CTR0 for Mode 3:
+						Square Wave Generator */
+	wdt_ctr_mode(1, 2);		/* Program CTR1 for Mode 2:
+						Rate Generator */
+	wdt_ctr_mode(2, 0);		/* Program CTR2 for Mode 0:
+						Pulse on Terminal Count */
 	wdt_ctr_load(0, 8948);		/* Count at 100Hz */
-	wdt_ctr_load(1,wd_heartbeat);	/* Heartbeat */
-	wdt_ctr_load(2,65535);		/* Length of reset pulse */
+	wdt_ctr_load(1, wd_heartbeat);	/* Heartbeat */
+	wdt_ctr_load(2, 65535);		/* Length of reset pulse */
 	outb_p(0, WDT_DC);		/* Enable watchdog */
 	spin_unlock_irqrestore(&wdt_lock, flags);
 	return 0;
@@ -131,13 +140,13 @@ static int wdt_start(void)
  *	Stop the watchdog driver.
  */
 
-static int wdt_stop (void)
+static int wdt_stop(void)
 {
 	unsigned long flags;
 	spin_lock_irqsave(&wdt_lock, flags);
 	/* Turn the card off */
 	inb_p(WDT_DC);			/* Disable watchdog */
-	wdt_ctr_load(2,0);		/* 0 length reset pulses now */
+	wdt_ctr_load(2, 0);		/* 0 length reset pulses now */
 	spin_unlock_irqrestore(&wdt_lock, flags);
 	return 0;
 }
@@ -145,8 +154,8 @@ static int wdt_stop (void)
 /**
  *	wdt_ping:
  *
- *	Reload counter one with the watchdog heartbeat. We don't bother reloading
- *	the cascade counter.
+ *	Reload counter one with the watchdog heartbeat. We don't bother
+ *	reloading the cascade counter.
  */
 
 static int wdt_ping(void)
@@ -155,8 +164,9 @@ static int wdt_ping(void)
 	spin_lock_irqsave(&wdt_lock, flags);
 	/* Write a watchdog value */
 	inb_p(WDT_DC);			/* Disable watchdog */
-	wdt_ctr_mode(1,2);		/* Re-Program CTR1 for Mode 2: Rate Generator */
-	wdt_ctr_load(1,wd_heartbeat);	/* Heartbeat */
+	wdt_ctr_mode(1, 2);		/* Re-Program CTR1 for Mode 2:
+							Rate Generator */
+	wdt_ctr_load(1, wd_heartbeat);	/* Heartbeat */
 	outb_p(0, WDT_DC);		/* Enable watchdog */
 	spin_unlock_irqrestore(&wdt_lock, flags);
 	return 0;
@@ -166,13 +176,14 @@ static int wdt_ping(void)
  *	wdt_set_heartbeat:
  *	@t:		the new heartbeat value that needs to be set.
  *
- *	Set a new heartbeat value for the watchdog device. If the heartbeat value is
- *	incorrect we keep the old value and return -EINVAL. If successfull we
- *	return 0.
+ *	Set a new heartbeat value for the watchdog device. If the heartbeat
+ *	value is incorrect we keep the old value and return -EINVAL. If
+ *	successful we return 0.
  */
+
 static int wdt_set_heartbeat(int t)
 {
-	if ((t < 1) || (t > 65535))
+	if (t < 1 || t > 65535)
 		return -EINVAL;
 
 	heartbeat = t;
@@ -200,7 +211,7 @@ static int wdt_get_status(int *status)
 	new_status = inb_p(WDT_SR);
 	spin_unlock_irqrestore(&wdt_lock, flags);
 
-	*status=0;
+	*status = 0;
 	if (new_status & WDC_SR_ISOI0)
 		*status |= WDIOF_EXTERN1;
 	if (new_status & WDC_SR_ISII1)
@@ -266,7 +277,7 @@ static irqreturn_t wdt_interrupt(int irq, void *dev_id)
 
 #ifdef CONFIG_WDT_501
 	if (!(status & WDC_SR_TGOOD))
-		printk(KERN_CRIT "Overheat alarm.(%d)\n",inb_p(WDT_RT));
+		printk(KERN_CRIT "Overheat alarm.(%d)\n", inb_p(WDT_RT));
 	if (!(status & WDC_SR_PSUOVER))
 		printk(KERN_CRIT "PSU over voltage.\n");
 	if (!(status & WDC_SR_PSUUNDR))
@@ -304,9 +315,10 @@ static irqreturn_t wdt_interrupt(int irq, void *dev_id)
  *	write of data will do, as we we don't define content meaning.
  */
 
-static ssize_t wdt_write(struct file *file, const char __user *buf, size_t count, loff_t *ppos)
+static ssize_t wdt_write(struct file *file, const char __user *buf,
+						size_t count, loff_t *ppos)
 {
-	if(count) {
+	if (count) {
 		if (!nowayout) {
 			size_t i;
 
@@ -328,7 +340,6 @@ static ssize_t wdt_write(struct file *file, const char __user *buf, size_t count
 
 /**
  *	wdt_ioctl:
- *	@inode: inode of the device
  *	@file: file handle to the device
  *	@cmd: watchdog command
  *	@arg: argument pointer
@@ -338,8 +349,7 @@ static ssize_t wdt_write(struct file *file, const char __user *buf, size_t count
  *	querying capabilities and current status.
  */
 
-static int wdt_ioctl(struct inode *inode, struct file *file, unsigned int cmd,
-	unsigned long arg)
+static long wdt_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
 {
 	void __user *argp = (void __user *)arg;
 	int __user *p = argp;
@@ -362,32 +372,28 @@ static int wdt_ioctl(struct inode *inode, struct file *file, unsigned int cmd,
 		ident.options |= WDIOF_FANFAULT;
 #endif /* CONFIG_WDT_501 */
 
-	switch(cmd)
-	{
-		default:
-			return -ENOTTY;
-		case WDIOC_GETSUPPORT:
-			return copy_to_user(argp, &ident, sizeof(ident))?-EFAULT:0;
-
-		case WDIOC_GETSTATUS:
-			wdt_get_status(&status);
-			return put_user(status, p);
-		case WDIOC_GETBOOTSTATUS:
-			return put_user(0, p);
-		case WDIOC_KEEPALIVE:
-			wdt_ping();
-			return 0;
-		case WDIOC_SETTIMEOUT:
-			if (get_user(new_heartbeat, p))
-				return -EFAULT;
-
-			if (wdt_set_heartbeat(new_heartbeat))
-				return -EINVAL;
-
-			wdt_ping();
-			/* Fall */
-		case WDIOC_GETTIMEOUT:
-			return put_user(heartbeat, p);
+	switch (cmd) {
+	case WDIOC_GETSUPPORT:
+		return copy_to_user(argp, &ident, sizeof(ident)) ? -EFAULT : 0;
+	case WDIOC_GETSTATUS:
+		wdt_get_status(&status);
+		return put_user(status, p);
+	case WDIOC_GETBOOTSTATUS:
+		return put_user(0, p);
+	case WDIOC_KEEPALIVE:
+		wdt_ping();
+		return 0;
+	case WDIOC_SETTIMEOUT:
+		if (get_user(new_heartbeat, p))
+			return -EFAULT;
+		if (wdt_set_heartbeat(new_heartbeat))
+			return -EINVAL;
+		wdt_ping();
+		/* Fall */
+	case WDIOC_GETTIMEOUT:
+		return put_user(heartbeat, p);
+	default:
+		return -ENOTTY;
 	}
 }
 
@@ -405,7 +411,7 @@ static int wdt_ioctl(struct inode *inode, struct file *file, unsigned int cmd,
 
 static int wdt_open(struct inode *inode, struct file *file)
 {
-	if(test_and_set_bit(0, &wdt_is_open))
+	if (test_and_set_bit(0, &wdt_is_open))
 		return -EBUSY;
 	/*
 	 *	Activate
@@ -432,7 +438,8 @@ static int wdt_release(struct inode *inode, struct file *file)
 		wdt_stop();
 		clear_bit(0, &wdt_is_open);
 	} else {
-		printk(KERN_CRIT "wdt: WDT device closed unexpectedly.  WDT will not stop!\n");
+		printk(KERN_CRIT
+		 "wdt: WDT device closed unexpectedly.  WDT will not stop!\n");
 		wdt_ping();
 	}
 	expect_close = 0;
@@ -451,14 +458,15 @@ static int wdt_release(struct inode *inode, struct file *file)
  *	farenheit. It was designed by an imperial measurement luddite.
  */
 
-static ssize_t wdt_temp_read(struct file *file, char __user *buf, size_t count, loff_t *ptr)
+static ssize_t wdt_temp_read(struct file *file, char __user *buf,
+						size_t count, loff_t *ptr)
 {
 	int temperature;
 
 	if (wdt_get_temperature(&temperature))
 		return -EFAULT;
 
-	if (copy_to_user (buf, &temperature, 1))
+	if (copy_to_user(buf, &temperature, 1))
 		return -EFAULT;
 
 	return 1;
@@ -506,10 +514,8 @@ static int wdt_temp_release(struct inode *inode, struct file *file)
 static int wdt_notify_sys(struct notifier_block *this, unsigned long code,
 	void *unused)
 {
-	if(code==SYS_DOWN || code==SYS_HALT) {
-		/* Turn the card off */
+	if (code == SYS_DOWN || code == SYS_HALT)
 		wdt_stop();
-	}
 	return NOTIFY_DONE;
 }
 
@@ -522,7 +528,7 @@ static const struct file_operations wdt_fops = {
 	.owner		= THIS_MODULE,
 	.llseek		= no_llseek,
 	.write		= wdt_write,
-	.ioctl		= wdt_ioctl,
+	.unlocked_ioctl	= wdt_ioctl,
 	.open		= wdt_open,
 	.release	= wdt_release,
 };
@@ -576,7 +582,7 @@ static void __exit wdt_exit(void)
 #endif /* CONFIG_WDT_501 */
 	unregister_reboot_notifier(&wdt_notifier);
 	free_irq(irq, NULL);
-	release_region(io,8);
+	release_region(io, 8);
 }
 
 /**
@@ -591,44 +597,49 @@ static int __init wdt_init(void)
 {
 	int ret;
 
-	/* Check that the heartbeat value is within it's range ; if not reset to the default */
+	/* Check that the heartbeat value is within it's range;
+	   if not reset to the default */
 	if (wdt_set_heartbeat(heartbeat)) {
 		wdt_set_heartbeat(WD_TIMO);
-		printk(KERN_INFO "wdt: heartbeat value must be 0<heartbeat<65536, using %d\n",
+		printk(KERN_INFO "wdt: heartbeat value must be 0 < heartbeat < 65536, using %d\n",
 			WD_TIMO);
 	}
 
 	if (!request_region(io, 8, "wdt501p")) {
-		printk(KERN_ERR "wdt: I/O address 0x%04x already in use\n", io);
+		printk(KERN_ERR
+			"wdt: I/O address 0x%04x already in use\n", io);
 		ret = -EBUSY;
 		goto out;
 	}
 
 	ret = request_irq(irq, wdt_interrupt, IRQF_DISABLED, "wdt501p", NULL);
-	if(ret) {
+	if (ret) {
 		printk(KERN_ERR "wdt: IRQ %d is not free.\n", irq);
 		goto outreg;
 	}
 
 	ret = register_reboot_notifier(&wdt_notifier);
-	if(ret) {
-		printk(KERN_ERR "wdt: cannot register reboot notifier (err=%d)\n", ret);
+	if (ret) {
+		printk(KERN_ERR
+		      "wdt: cannot register reboot notifier (err=%d)\n", ret);
 		goto outirq;
 	}
 
 #ifdef CONFIG_WDT_501
 	ret = misc_register(&temp_miscdev);
 	if (ret) {
-		printk(KERN_ERR "wdt: cannot register miscdev on minor=%d (err=%d)\n",
-			TEMP_MINOR, ret);
+		printk(KERN_ERR
+			"wdt: cannot register miscdev on minor=%d (err=%d)\n",
+							TEMP_MINOR, ret);
 		goto outrbt;
 	}
 #endif /* CONFIG_WDT_501 */
 
 	ret = misc_register(&wdt_miscdev);
 	if (ret) {
-		printk(KERN_ERR "wdt: cannot register miscdev on minor=%d (err=%d)\n",
-			WATCHDOG_MINOR, ret);
+		printk(KERN_ERR
+			"wdt: cannot register miscdev on minor=%d (err=%d)\n",
+							WATCHDOG_MINOR, ret);
 		goto outmisc;
 	}
 
@@ -636,7 +647,8 @@ static int __init wdt_init(void)
 	printk(KERN_INFO "WDT500/501-P driver 0.10 at 0x%04x (Interrupt %d). heartbeat=%d sec (nowayout=%d)\n",
 		io, irq, heartbeat, nowayout);
 #ifdef CONFIG_WDT_501
-	printk(KERN_INFO "wdt: Fan Tachometer is %s\n", (tachometer ? "Enabled" : "Disabled"));
+	printk(KERN_INFO "wdt: Fan Tachometer is %s\n",
+				(tachometer ? "Enabled" : "Disabled"));
 #endif /* CONFIG_WDT_501 */
 
 out:
@@ -651,7 +663,7 @@ outrbt:
 outirq:
 	free_irq(irq, NULL);
 outreg:
-	release_region(io,8);
+	release_region(io, 8);
 	goto out;
 }
 
diff --git a/drivers/watchdog/wdt285.c b/drivers/watchdog/wdt285.c
index e4cf661dc890..db362c34958b 100644
--- a/drivers/watchdog/wdt285.c
+++ b/drivers/watchdog/wdt285.c
@@ -26,10 +26,10 @@
 #include <linux/reboot.h>
 #include <linux/init.h>
 #include <linux/interrupt.h>
+#include <linux/uaccess.h>
+#include <linux/irq.h>
+#include <mach/hardware.h>
 
-#include <asm/irq.h>
-#include <asm/uaccess.h>
-#include <asm/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/hardware/dec21285.h>
 
@@ -115,8 +115,8 @@ static int watchdog_release(struct inode *inode, struct file *file)
 	return 0;
 }
 
-static ssize_t
-watchdog_write(struct file *file, const char *data, size_t len, loff_t *ppos)
+static ssize_t watchdog_write(struct file *file, const char *data,
+						size_t len, loff_t *ppos)
 {
 	/*
 	 *	Refresh the timer.
@@ -127,19 +127,18 @@ watchdog_write(struct file *file, const char *data, size_t len, loff_t *ppos)
 	return len;
 }
 
-static struct watchdog_info ident = {
+static const struct watchdog_info ident = {
 	.options	= WDIOF_SETTIMEOUT,
 	.identity	= "Footbridge Watchdog",
 };
 
-static int
-watchdog_ioctl(struct inode *inode, struct file *file, unsigned int cmd,
-	       unsigned long arg)
+static long watchdog_ioctl(struct file *file, unsigned int cmd,
+							unsigned long arg)
 {
 	unsigned int new_margin;
 	int ret = -ENOTTY;
 
-	switch(cmd) {
+	switch (cmd) {
 	case WDIOC_GETSUPPORT:
 		ret = 0;
 		if (copy_to_user((void *)arg, &ident, sizeof(ident)))
@@ -148,7 +147,7 @@ watchdog_ioctl(struct inode *inode, struct file *file, unsigned int cmd,
 
 	case WDIOC_GETSTATUS:
 	case WDIOC_GETBOOTSTATUS:
-		ret = put_user(0,(int *)arg);
+		ret = put_user(0, (int *)arg);
 		break;
 
 	case WDIOC_KEEPALIVE:
@@ -182,7 +181,7 @@ static const struct file_operations watchdog_fops = {
 	.owner		= THIS_MODULE,
 	.llseek		= no_llseek,
 	.write		= watchdog_write,
-	.ioctl		= watchdog_ioctl,
+	.unlocked_ioctl	= watchdog_ioctl,
 	.open		= watchdog_open,
 	.release	= watchdog_release,
 };
@@ -204,11 +203,13 @@ static int __init footbridge_watchdog_init(void)
 	if (retval < 0)
 		return retval;
 
-	printk("Footbridge Watchdog Timer: 0.01, timer margin: %d sec\n",
-	       soft_margin);
+	printk(KERN_INFO
+		"Footbridge Watchdog Timer: 0.01, timer margin: %d sec\n",
+								soft_margin);
 
 	if (machine_is_cats())
-		printk("Warning: Watchdog reset may not work on this machine.\n");
+		printk(KERN_WARNING
+		  "Warning: Watchdog reset may not work on this machine.\n");
 	return 0;
 }
 
@@ -223,7 +224,7 @@ MODULE_LICENSE("GPL");
 MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR);
 
 module_param(soft_margin, int, 0);
-MODULE_PARM_DESC(soft_margin,"Watchdog timeout in seconds");
+MODULE_PARM_DESC(soft_margin, "Watchdog timeout in seconds");
 
 module_init(footbridge_watchdog_init);
 module_exit(footbridge_watchdog_exit);
diff --git a/drivers/watchdog/wdt977.c b/drivers/watchdog/wdt977.c
index fb4b876c9fda..60e28d49ff52 100644
--- a/drivers/watchdog/wdt977.c
+++ b/drivers/watchdog/wdt977.c
@@ -19,7 +19,8 @@
  *      07-Jul-2003 Daniele Bellucci: Audit return code of misc_register in
  *                                    nwwatchdog_init.
  *      25-Oct-2005 Woody Suwalski: Convert addresses to #defs, add spinlocks
- *				    remove limitiation to be used on Netwinders only
+ *				    remove limitiation to be used on
+ *				    Netwinders only
  */
 
 #include <linux/module.h>
@@ -33,11 +34,11 @@
 #include <linux/watchdog.h>
 #include <linux/notifier.h>
 #include <linux/reboot.h>
+#include <linux/io.h>
+#include <linux/uaccess.h>
 
-#include <asm/io.h>
 #include <asm/system.h>
 #include <asm/mach-types.h>
-#include <asm/uaccess.h>
 
 #define WATCHDOG_VERSION  "0.04"
 #define WATCHDOG_NAME     "Wdt977"
@@ -45,7 +46,7 @@
 #define DRIVER_VERSION    WATCHDOG_NAME " driver, v" WATCHDOG_VERSION "\n"
 
 #define IO_INDEX_PORT	0x370		/* on some systems it can be 0x3F0 */
-#define IO_DATA_PORT	(IO_INDEX_PORT+1)
+#define IO_DATA_PORT	(IO_INDEX_PORT + 1)
 
 #define UNLOCK_DATA	0x87
 #define LOCK_DATA	0xAA
@@ -62,13 +63,16 @@ static	char expect_close;
 static	DEFINE_SPINLOCK(spinlock);
 
 module_param(timeout, int, 0);
-MODULE_PARM_DESC(timeout,"Watchdog timeout in seconds (60..15300), default=" __MODULE_STRING(DEFAULT_TIMEOUT) ")");
+MODULE_PARM_DESC(timeout, "Watchdog timeout in seconds (60..15300), default="
+				__MODULE_STRING(DEFAULT_TIMEOUT) ")");
 module_param(testmode, int, 0);
-MODULE_PARM_DESC(testmode,"Watchdog testmode (1 = no reboot), default=0");
+MODULE_PARM_DESC(testmode, "Watchdog testmode (1 = no reboot), default=0");
 
 static int nowayout = WATCHDOG_NOWAYOUT;
 module_param(nowayout, int, 0);
-MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=" __MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
+MODULE_PARM_DESC(nowayout,
+		"Watchdog cannot be stopped once started (default="
+				__MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
 
 /*
  * Start the watchdog
@@ -95,14 +99,16 @@ static int wdt977_start(void)
 	outb_p(0xF2, IO_INDEX_PORT);
 	outb_p(timeoutM, IO_DATA_PORT);
 	outb_p(0xF3, IO_INDEX_PORT);
-	outb_p(0x00, IO_DATA_PORT);	/* another setting is 0E for kbd/mouse/LED */
+	outb_p(0x00, IO_DATA_PORT);	/* another setting is 0E for
+					   kbd/mouse/LED */
 	outb_p(0xF4, IO_INDEX_PORT);
 	outb_p(0x00, IO_DATA_PORT);
 
-	/* at last select device Aux1 (dev=7) and set GP16 as a watchdog output */
-	/* in test mode watch the bit 1 on F4 to indicate "triggered" */
-	if (!testmode)
-	{
+	/* At last select device Aux1 (dev=7) and set GP16 as a
+	 * watchdog output. In test mode watch the bit 1 on F4 to
+	 * indicate "triggered"
+	 */
+	if (!testmode) {
 		outb_p(DEVICE_REGISTER, IO_INDEX_PORT);
 		outb_p(0x07, IO_DATA_PORT);
 		outb_p(0xE6, IO_INDEX_PORT);
@@ -147,7 +153,8 @@ static int wdt977_stop(void)
 	outb_p(0xF2, IO_INDEX_PORT);
 	outb_p(0x00, IO_DATA_PORT);
 
-	/* at last select device Aux1 (dev=7) and set GP16 as a watchdog output */
+	/* at last select device Aux1 (dev=7) and set
+	   GP16 as a watchdog output */
 	outb_p(DEVICE_REGISTER, IO_INDEX_PORT);
 	outb_p(0x07, IO_DATA_PORT);
 	outb_p(0xE6, IO_INDEX_PORT);
@@ -202,16 +209,18 @@ static int wdt977_set_timeout(int t)
 	tmrval = (t + 59) / 60;
 
 	if (machine_is_netwinder()) {
-		/* we have a hw bug somewhere, so each 977 minute is actually only 30sec
-		 *  this limits the max timeout to half of device max of 255 minutes...
+		/* we have a hw bug somewhere, so each 977 minute is actually
+		 * only 30sec. This limits the max timeout to half of device
+		 * max of 255 minutes...
 		 */
 		tmrval += tmrval;
 	}
 
-	if ((tmrval < 1) || (tmrval > 255))
+	if (tmrval < 1 || tmrval > 255)
 		return -EINVAL;
 
-	/* timeout is the timeout in seconds, timeoutM is the timeout in minutes) */
+	/* timeout is the timeout in seconds, timeoutM is
+	   the timeout in minutes) */
 	timeout = t;
 	timeoutM = tmrval;
 	return 0;
@@ -243,7 +252,7 @@ static int wdt977_get_status(int *status)
 
 	spin_unlock_irqrestore(&spinlock, flags);
 
-	*status=0;
+	*status = 0;
 	if (new_status & 1)
 		*status |= WDIOF_CARDRESET;
 
@@ -258,7 +267,7 @@ static int wdt977_get_status(int *status)
 static int wdt977_open(struct inode *inode, struct file *file)
 {
 	/* If the watchdog is alive we don't need to start it again */
-	if( test_and_set_bit(0,&timer_alive) )
+	if (test_and_set_bit(0, &timer_alive))
 		return -EBUSY;
 
 	if (nowayout)
@@ -274,13 +283,13 @@ static int wdt977_release(struct inode *inode, struct file *file)
 	 *	Shut off the timer.
 	 * 	Lock it in if it's a module and we set nowayout
 	 */
-	if (expect_close == 42)
-	{
+	if (expect_close == 42) {
 		wdt977_stop();
-		clear_bit(0,&timer_alive);
+		clear_bit(0, &timer_alive);
 	} else {
 		wdt977_keepalive();
-		printk(KERN_CRIT PFX "Unexpected close, not stopping watchdog!\n");
+		printk(KERN_CRIT PFX
+			"Unexpected close, not stopping watchdog!\n");
 	}
 	expect_close = 0;
 	return 0;
@@ -301,17 +310,14 @@ static int wdt977_release(struct inode *inode, struct file *file)
 static ssize_t wdt977_write(struct file *file, const char __user *buf,
 			    size_t count, loff_t *ppos)
 {
-	if (count)
-	{
-		if (!nowayout)
-		{
+	if (count) {
+		if (!nowayout) {
 			size_t i;
 
 			/* In case it was set long ago */
 			expect_close = 0;
 
-			for (i = 0; i != count; i++)
-			{
+			for (i = 0; i != count; i++) {
 				char c;
 				if (get_user(c, buf + i))
 					return -EFAULT;
@@ -326,6 +332,14 @@ static ssize_t wdt977_write(struct file *file, const char __user *buf,
 	return count;
 }
 
+static const struct watchdog_info ident = {
+	.options =		WDIOF_SETTIMEOUT |
+				WDIOF_MAGICCLOSE |
+				WDIOF_KEEPALIVEPING,
+	.firmware_version =	1,
+	.identity =		WATCHDOG_NAME,
+};
+
 /*
  *      wdt977_ioctl:
  *      @inode: inode of the device
@@ -337,16 +351,8 @@ static ssize_t wdt977_write(struct file *file, const char __user *buf,
  *      according to their available features.
  */
 
-static struct watchdog_info ident = {
-	.options =		WDIOF_SETTIMEOUT |
-				WDIOF_MAGICCLOSE |
-				WDIOF_KEEPALIVEPING,
-	.firmware_version =	1,
-	.identity =		WATCHDOG_NAME,
-};
-
-static int wdt977_ioctl(struct inode *inode, struct file *file,
-	unsigned int cmd, unsigned long arg)
+static long wdt977_ioctl(struct file *file, unsigned int cmd,
+							unsigned long arg)
 {
 	int status;
 	int new_options, retval = -EINVAL;
@@ -358,11 +364,7 @@ static int wdt977_ioctl(struct inode *inode, struct file *file,
 
 	uarg.i = (int __user *)arg;
 
-	switch(cmd)
-	{
-	default:
-		return -ENOTTY;
-
+	switch (cmd) {
 	case WDIOC_GETSUPPORT:
 		return copy_to_user(uarg.ident, &ident,
 			sizeof(ident)) ? -EFAULT : 0;
@@ -374,12 +376,8 @@ static int wdt977_ioctl(struct inode *inode, struct file *file,
 	case WDIOC_GETBOOTSTATUS:
 		return put_user(0, uarg.i);
 
-	case WDIOC_KEEPALIVE:
-		wdt977_keepalive();
-		return 0;
-
 	case WDIOC_SETOPTIONS:
-		if (get_user (new_options, uarg.i))
+		if (get_user(new_options, uarg.i))
 			return -EFAULT;
 
 		if (new_options & WDIOS_DISABLECARD) {
@@ -394,6 +392,10 @@ static int wdt977_ioctl(struct inode *inode, struct file *file,
 
 		return retval;
 
+	case WDIOC_KEEPALIVE:
+		wdt977_keepalive();
+		return 0;
+
 	case WDIOC_SETTIMEOUT:
 		if (get_user(new_timeout, uarg.i))
 			return -EFAULT;
@@ -407,29 +409,30 @@ static int wdt977_ioctl(struct inode *inode, struct file *file,
 	case WDIOC_GETTIMEOUT:
 		return put_user(timeout, uarg.i);
 
+	default:
+		return -ENOTTY;
+
 	}
 }
 
 static int wdt977_notify_sys(struct notifier_block *this, unsigned long code,
 	void *unused)
 {
-	if(code==SYS_DOWN || code==SYS_HALT)
+	if (code == SYS_DOWN || code == SYS_HALT)
 		wdt977_stop();
 	return NOTIFY_DONE;
 }
 
-static const struct file_operations wdt977_fops=
-{
+static const struct file_operations wdt977_fops = {
 	.owner		= THIS_MODULE,
 	.llseek		= no_llseek,
 	.write		= wdt977_write,
-	.ioctl		= wdt977_ioctl,
+	.unlocked_ioctl	= wdt977_ioctl,
 	.open		= wdt977_open,
 	.release	= wdt977_release,
 };
 
-static struct miscdevice wdt977_miscdev=
-{
+static struct miscdevice wdt977_miscdev = {
 	.minor		= WATCHDOG_MINOR,
 	.name		= "watchdog",
 	.fops		= &wdt977_fops,
@@ -443,51 +446,48 @@ static int __init wd977_init(void)
 {
 	int rc;
 
-	//if (!machine_is_netwinder())
-	//	return -ENODEV;
-
 	printk(KERN_INFO PFX DRIVER_VERSION);
 
-	/* Check that the timeout value is within it's range ; if not reset to the default */
-	if (wdt977_set_timeout(timeout))
-	{
+	/* Check that the timeout value is within its range;
+	   if not reset to the default */
+	if (wdt977_set_timeout(timeout)) {
 		wdt977_set_timeout(DEFAULT_TIMEOUT);
-		printk(KERN_INFO PFX "timeout value must be 60<timeout<15300, using %d\n",
-			DEFAULT_TIMEOUT);
+		printk(KERN_INFO PFX
+		      "timeout value must be 60 < timeout < 15300, using %d\n",
+							DEFAULT_TIMEOUT);
 	}
 
 	/* on Netwinder the IOports are already reserved by
 	 * arch/arm/mach-footbridge/netwinder-hw.c
 	 */
-	if (!machine_is_netwinder())
-	{
-		if (!request_region(IO_INDEX_PORT, 2, WATCHDOG_NAME))
-		{
-			printk(KERN_ERR PFX "I/O address 0x%04x already in use\n",
-				IO_INDEX_PORT);
+	if (!machine_is_netwinder()) {
+		if (!request_region(IO_INDEX_PORT, 2, WATCHDOG_NAME)) {
+			printk(KERN_ERR PFX
+				"I/O address 0x%04x already in use\n",
+								IO_INDEX_PORT);
 			rc = -EIO;
 			goto err_out;
 		}
 	}
 
 	rc = register_reboot_notifier(&wdt977_notifier);
-	if (rc)
-	{
-		printk(KERN_ERR PFX "cannot register reboot notifier (err=%d)\n",
-			rc);
+	if (rc) {
+		printk(KERN_ERR PFX
+			"cannot register reboot notifier (err=%d)\n", rc);
 		goto err_out_region;
 	}
 
 	rc = misc_register(&wdt977_miscdev);
-	if (rc)
-	{
-		printk(KERN_ERR PFX "cannot register miscdev on minor=%d (err=%d)\n",
-			wdt977_miscdev.minor, rc);
+	if (rc) {
+		printk(KERN_ERR PFX
+			"cannot register miscdev on minor=%d (err=%d)\n",
+						wdt977_miscdev.minor, rc);
 		goto err_out_reboot;
 	}
 
-	printk(KERN_INFO PFX "initialized. timeout=%d sec (nowayout=%d, testmode=%i)\n",
-		timeout, nowayout, testmode);
+	printk(KERN_INFO PFX
+		"initialized. timeout=%d sec (nowayout=%d, testmode=%i)\n",
+						timeout, nowayout, testmode);
 
 	return 0;
 
@@ -495,7 +495,7 @@ err_out_reboot:
 	unregister_reboot_notifier(&wdt977_notifier);
 err_out_region:
 	if (!machine_is_netwinder())
-	        release_region(IO_INDEX_PORT,2);
+		release_region(IO_INDEX_PORT, 2);
 err_out:
 	return rc;
 }
@@ -505,7 +505,7 @@ static void __exit wd977_exit(void)
 	wdt977_stop();
 	misc_deregister(&wdt977_miscdev);
 	unregister_reboot_notifier(&wdt977_notifier);
-	release_region(IO_INDEX_PORT,2);
+	release_region(IO_INDEX_PORT, 2);
 }
 
 module_init(wd977_init);
diff --git a/drivers/watchdog/wdt_pci.c b/drivers/watchdog/wdt_pci.c
index 1355608683e4..ed02bdb38c09 100644
--- a/drivers/watchdog/wdt_pci.c
+++ b/drivers/watchdog/wdt_pci.c
@@ -29,9 +29,11 @@
  *		JP Nollmann	:	Added support for PCI wdt501p
  *		Alan Cox	:	Split ISA and PCI cards into two drivers
  *		Jeff Garzik	:	PCI cleanups
- *		Tigran Aivazian	:	Restructured wdtpci_init_one() to handle failures
+ *		Tigran Aivazian	:	Restructured wdtpci_init_one() to handle
+ *					failures
  *		Joel Becker 	:	Added WDIOC_GET/SETTIMEOUT
- *		Zwane Mwaikambo	:	Magic char closing, locking changes, cleanups
+ *		Zwane Mwaikambo	:	Magic char closing, locking changes,
+ *					cleanups
  *		Matt Domsch	:	nowayout module option
  */
 
@@ -42,14 +44,15 @@
 #include <linux/miscdevice.h>
 #include <linux/watchdog.h>
 #include <linux/ioport.h>
+#include <linux/delay.h>
 #include <linux/notifier.h>
 #include <linux/reboot.h>
 #include <linux/init.h>
 #include <linux/fs.h>
 #include <linux/pci.h>
+#include <linux/io.h>
+#include <linux/uaccess.h>
 
-#include <asm/io.h>
-#include <asm/uaccess.h>
 #include <asm/system.h>
 
 #define WDT_IS_PCI
@@ -73,7 +76,7 @@
 /* We can only use 1 card due to the /dev/watchdog restriction */
 static int dev_count;
 
-static struct semaphore open_sem;
+static unsigned long open_lock;
 static DEFINE_SPINLOCK(wdtpci_lock);
 static char expect_close;
 
@@ -86,18 +89,23 @@ static int irq;
 static int heartbeat = WD_TIMO;
 static int wd_heartbeat;
 module_param(heartbeat, int, 0);
-MODULE_PARM_DESC(heartbeat, "Watchdog heartbeat in seconds. (0<heartbeat<65536, default=" __MODULE_STRING(WD_TIMO) ")");
+MODULE_PARM_DESC(heartbeat,
+		"Watchdog heartbeat in seconds. (0<heartbeat<65536, default="
+				__MODULE_STRING(WD_TIMO) ")");
 
 static int nowayout = WATCHDOG_NOWAYOUT;
 module_param(nowayout, int, 0);
-MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=" __MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
+MODULE_PARM_DESC(nowayout,
+		"Watchdog cannot be stopped once started (default="
+				__MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
 
 #ifdef CONFIG_WDT_501_PCI
 /* Support for the Fan Tachometer on the PCI-WDT501 */
 static int tachometer;
 
 module_param(tachometer, int, 0);
-MODULE_PARM_DESC(tachometer, "PCI-WDT501 Fan Tachometer support (0=disable, default=0)");
+MODULE_PARM_DESC(tachometer,
+	"PCI-WDT501 Fan Tachometer support (0=disable, default=0)");
 #endif /* CONFIG_WDT_501_PCI */
 
 /*
@@ -106,16 +114,19 @@ MODULE_PARM_DESC(tachometer, "PCI-WDT501 Fan Tachometer support (0=disable, defa
 
 static void wdtpci_ctr_mode(int ctr, int mode)
 {
-	ctr<<=6;
-	ctr|=0x30;
-	ctr|=(mode<<1);
-	outb_p(ctr, WDT_CR);
+	ctr <<= 6;
+	ctr |= 0x30;
+	ctr |= (mode << 1);
+	outb(ctr, WDT_CR);
+	udelay(8);
 }
 
 static void wdtpci_ctr_load(int ctr, int val)
 {
-	outb_p(val&0xFF, WDT_COUNT0+ctr);
-	outb_p(val>>8, WDT_COUNT0+ctr);
+	outb(val & 0xFF, WDT_COUNT0 + ctr);
+	udelay(8);
+	outb(val >> 8, WDT_COUNT0 + ctr);
+	udelay(8);
 }
 
 /**
@@ -134,23 +145,35 @@ static int wdtpci_start(void)
 	 * "pet" the watchdog, as Access says.
 	 * This resets the clock outputs.
 	 */
-	inb_p(WDT_DC);			/* Disable watchdog */
-	wdtpci_ctr_mode(2,0);		/* Program CTR2 for Mode 0: Pulse on Terminal Count */
-	outb_p(0, WDT_DC);		/* Enable watchdog */
-
-	inb_p(WDT_DC);			/* Disable watchdog */
-	outb_p(0, WDT_CLOCK);		/* 2.0833MHz clock */
-	inb_p(WDT_BUZZER);		/* disable */
-	inb_p(WDT_OPTONOTRST);		/* disable */
-	inb_p(WDT_OPTORST);		/* disable */
-	inb_p(WDT_PROGOUT);		/* disable */
-	wdtpci_ctr_mode(0,3);		/* Program CTR0 for Mode 3: Square Wave Generator */
-	wdtpci_ctr_mode(1,2);		/* Program CTR1 for Mode 2: Rate Generator */
-	wdtpci_ctr_mode(2,1);		/* Program CTR2 for Mode 1: Retriggerable One-Shot */
-	wdtpci_ctr_load(0,20833);	/* count at 100Hz */
-	wdtpci_ctr_load(1,wd_heartbeat);/* Heartbeat */
+	inb(WDT_DC);			/* Disable watchdog */
+	udelay(8);
+	wdtpci_ctr_mode(2, 0);		/* Program CTR2 for Mode 0:
+						Pulse on Terminal Count */
+	outb(0, WDT_DC);		/* Enable watchdog */
+	udelay(8);
+	inb(WDT_DC);			/* Disable watchdog */
+	udelay(8);
+	outb(0, WDT_CLOCK);		/* 2.0833MHz clock */
+	udelay(8);
+	inb(WDT_BUZZER);		/* disable */
+	udelay(8);
+	inb(WDT_OPTONOTRST);		/* disable */
+	udelay(8);
+	inb(WDT_OPTORST);		/* disable */
+	udelay(8);
+	inb(WDT_PROGOUT);		/* disable */
+	udelay(8);
+	wdtpci_ctr_mode(0, 3);		/* Program CTR0 for Mode 3:
+						Square Wave Generator */
+	wdtpci_ctr_mode(1, 2);		/* Program CTR1 for Mode 2:
+						Rate Generator */
+	wdtpci_ctr_mode(2, 1);		/* Program CTR2 for Mode 1:
+						Retriggerable One-Shot */
+	wdtpci_ctr_load(0, 20833);	/* count at 100Hz */
+	wdtpci_ctr_load(1, wd_heartbeat);/* Heartbeat */
 	/* DO NOT LOAD CTR2 on PCI card! -- JPN */
-	outb_p(0, WDT_DC);		/* Enable watchdog */
+	outb(0, WDT_DC);		/* Enable watchdog */
+	udelay(8);
 
 	spin_unlock_irqrestore(&wdtpci_lock, flags);
 	return 0;
@@ -162,14 +185,15 @@ static int wdtpci_start(void)
  *	Stop the watchdog driver.
  */
 
-static int wdtpci_stop (void)
+static int wdtpci_stop(void)
 {
 	unsigned long flags;
 
 	/* Turn the card off */
 	spin_lock_irqsave(&wdtpci_lock, flags);
-	inb_p(WDT_DC);			/* Disable watchdog */
-	wdtpci_ctr_load(2,0);		/* 0 length reset pulses now */
+	inb(WDT_DC);			/* Disable watchdog */
+	udelay(8);
+	wdtpci_ctr_load(2, 0);		/* 0 length reset pulses now */
 	spin_unlock_irqrestore(&wdtpci_lock, flags);
 	return 0;
 }
@@ -177,20 +201,23 @@ static int wdtpci_stop (void)
 /**
  *	wdtpci_ping:
  *
- *	Reload counter one with the watchdog heartbeat. We don't bother reloading
- *	the cascade counter.
+ *	Reload counter one with the watchdog heartbeat. We don't bother
+ *	reloading the cascade counter.
  */
 
 static int wdtpci_ping(void)
 {
 	unsigned long flags;
 
-	/* Write a watchdog value */
 	spin_lock_irqsave(&wdtpci_lock, flags);
-	inb_p(WDT_DC);			/* Disable watchdog */
-	wdtpci_ctr_mode(1,2);		/* Re-Program CTR1 for Mode 2: Rate Generator */
-	wdtpci_ctr_load(1,wd_heartbeat);/* Heartbeat */
-	outb_p(0, WDT_DC);		/* Enable watchdog */
+	/* Write a watchdog value */
+	inb(WDT_DC);			/* Disable watchdog */
+	udelay(8);
+	wdtpci_ctr_mode(1, 2);		/* Re-Program CTR1 for Mode 2:
+							Rate Generator */
+	wdtpci_ctr_load(1, wd_heartbeat);/* Heartbeat */
+	outb(0, WDT_DC);		/* Enable watchdog */
+	udelay(8);
 	spin_unlock_irqrestore(&wdtpci_lock, flags);
 	return 0;
 }
@@ -199,14 +226,14 @@ static int wdtpci_ping(void)
  *	wdtpci_set_heartbeat:
  *	@t:		the new heartbeat value that needs to be set.
  *
- *	Set a new heartbeat value for the watchdog device. If the heartbeat value is
- *	incorrect we keep the old value and return -EINVAL. If successfull we
- *	return 0.
+ *	Set a new heartbeat value for the watchdog device. If the heartbeat
+ *	value is incorrect we keep the old value and return -EINVAL.
+ *	If successful we return 0.
  */
 static int wdtpci_set_heartbeat(int t)
 {
 	/* Arbitrary, can't find the card's limits */
-	if ((t < 1) || (t > 65535))
+	if (t < 1 || t > 65535)
 		return -EINVAL;
 
 	heartbeat = t;
@@ -227,9 +254,14 @@ static int wdtpci_set_heartbeat(int t)
 
 static int wdtpci_get_status(int *status)
 {
-	unsigned char new_status=inb_p(WDT_SR);
+	unsigned char new_status;
+	unsigned long flags;
+
+	spin_lock_irqsave(&wdtpci_lock, flags);
+	new_status = inb(WDT_SR);
+	spin_unlock_irqrestore(&wdtpci_lock, flags);
 
-	*status=0;
+	*status = 0;
 	if (new_status & WDC_SR_ISOI0)
 		*status |= WDIOF_EXTERN1;
 	if (new_status & WDC_SR_ISII1)
@@ -259,8 +291,12 @@ static int wdtpci_get_status(int *status)
 
 static int wdtpci_get_temperature(int *temperature)
 {
-	unsigned short c=inb_p(WDT_RT);
-
+	unsigned short c;
+	unsigned long flags;
+	spin_lock_irqsave(&wdtpci_lock, flags);
+	c = inb(WDT_RT);
+	udelay(8);
+	spin_unlock_irqrestore(&wdtpci_lock, flags);
 	*temperature = (c * 11 / 15) + 7;
 	return 0;
 }
@@ -282,17 +318,25 @@ static irqreturn_t wdtpci_interrupt(int irq, void *dev_id)
 	 *	Read the status register see what is up and
 	 *	then printk it.
 	 */
-	unsigned char status=inb_p(WDT_SR);
+	unsigned char status;
+
+	spin_lock(&wdtpci_lock);
+
+	status = inb(WDT_SR);
+	udelay(8);
 
 	printk(KERN_CRIT PFX "status %d\n", status);
 
 #ifdef CONFIG_WDT_501_PCI
-	if (!(status & WDC_SR_TGOOD))
- 		printk(KERN_CRIT PFX "Overheat alarm.(%d)\n",inb_p(WDT_RT));
+	if (!(status & WDC_SR_TGOOD)) {
+		u8 alarm = inb(WDT_RT);
+		printk(KERN_CRIT PFX "Overheat alarm.(%d)\n", alarm);
+		udelay(8);
+	}
 	if (!(status & WDC_SR_PSUOVER))
- 		printk(KERN_CRIT PFX "PSU over voltage.\n");
+		printk(KERN_CRIT PFX "PSU over voltage.\n");
 	if (!(status & WDC_SR_PSUUNDR))
- 		printk(KERN_CRIT PFX "PSU under voltage.\n");
+		printk(KERN_CRIT PFX "PSU under voltage.\n");
 	if (tachometer) {
 		if (!(status & WDC_SR_FANGOOD))
 			printk(KERN_CRIT PFX "Possible fan fault.\n");
@@ -310,6 +354,7 @@ static irqreturn_t wdtpci_interrupt(int irq, void *dev_id)
 		printk(KERN_CRIT PFX "Reset in 5ms.\n");
 #endif
 	}
+	spin_unlock(&wdtpci_lock);
 	return IRQ_HANDLED;
 }
 
@@ -325,7 +370,8 @@ static irqreturn_t wdtpci_interrupt(int irq, void *dev_id)
  *	write of data will do, as we we don't define content meaning.
  */
 
-static ssize_t wdtpci_write(struct file *file, const char __user *buf, size_t count, loff_t *ppos)
+static ssize_t wdtpci_write(struct file *file, const char __user *buf,
+					size_t count, loff_t *ppos)
 {
 	if (count) {
 		if (!nowayout) {
@@ -335,7 +381,7 @@ static ssize_t wdtpci_write(struct file *file, const char __user *buf, size_t co
 
 			for (i = 0; i != count; i++) {
 				char c;
-				if(get_user(c, buf+i))
+				if (get_user(c, buf + i))
 					return -EFAULT;
 				if (c == 'V')
 					expect_close = 42;
@@ -343,13 +389,11 @@ static ssize_t wdtpci_write(struct file *file, const char __user *buf, size_t co
 		}
 		wdtpci_ping();
 	}
-
 	return count;
 }
 
 /**
  *	wdtpci_ioctl:
- *	@inode: inode of the device
  *	@file: file handle to the device
  *	@cmd: watchdog command
  *	@arg: argument pointer
@@ -359,8 +403,8 @@ static ssize_t wdtpci_write(struct file *file, const char __user *buf, size_t co
  *	querying capabilities and current status.
  */
 
-static int wdtpci_ioctl(struct inode *inode, struct file *file, unsigned int cmd,
-	unsigned long arg)
+static long wdtpci_ioctl(struct file *file, unsigned int cmd,
+							unsigned long arg)
 {
 	int new_heartbeat;
 	int status;
@@ -383,32 +427,28 @@ static int wdtpci_ioctl(struct inode *inode, struct file *file, unsigned int cmd
 		ident.options |= WDIOF_FANFAULT;
 #endif /* CONFIG_WDT_501_PCI */
 
-	switch(cmd)
-	{
-		default:
-			return -ENOTTY;
-		case WDIOC_GETSUPPORT:
-			return copy_to_user(argp, &ident, sizeof(ident))?-EFAULT:0;
-
-		case WDIOC_GETSTATUS:
-			wdtpci_get_status(&status);
-			return put_user(status, p);
-		case WDIOC_GETBOOTSTATUS:
-			return put_user(0, p);
-		case WDIOC_KEEPALIVE:
-			wdtpci_ping();
-			return 0;
-		case WDIOC_SETTIMEOUT:
-			if (get_user(new_heartbeat, p))
-				return -EFAULT;
-
-			if (wdtpci_set_heartbeat(new_heartbeat))
-				return -EINVAL;
-
-			wdtpci_ping();
-			/* Fall */
-		case WDIOC_GETTIMEOUT:
-			return put_user(heartbeat, p);
+	switch (cmd) {
+	case WDIOC_GETSUPPORT:
+		return copy_to_user(argp, &ident, sizeof(ident)) ? -EFAULT : 0;
+	case WDIOC_GETSTATUS:
+		wdtpci_get_status(&status);
+		return put_user(status, p);
+	case WDIOC_GETBOOTSTATUS:
+		return put_user(0, p);
+	case WDIOC_KEEPALIVE:
+		wdtpci_ping();
+		return 0;
+	case WDIOC_SETTIMEOUT:
+		if (get_user(new_heartbeat, p))
+			return -EFAULT;
+		if (wdtpci_set_heartbeat(new_heartbeat))
+			return -EINVAL;
+		wdtpci_ping();
+		/* Fall */
+	case WDIOC_GETTIMEOUT:
+		return put_user(heartbeat, p);
+	default:
+		return -ENOTTY;
 	}
 }
 
@@ -426,12 +466,11 @@ static int wdtpci_ioctl(struct inode *inode, struct file *file, unsigned int cmd
 
 static int wdtpci_open(struct inode *inode, struct file *file)
 {
-	if (down_trylock(&open_sem))
+	if (test_and_set_bit(0, &open_lock))
 		return -EBUSY;
 
-	if (nowayout) {
+	if (nowayout)
 		__module_get(THIS_MODULE);
-	}
 	/*
 	 *	Activate
 	 */
@@ -460,7 +499,7 @@ static int wdtpci_release(struct inode *inode, struct file *file)
 		wdtpci_ping();
 	}
 	expect_close = 0;
-	up(&open_sem);
+	clear_bit(0, &open_lock);
 	return 0;
 }
 
@@ -476,14 +515,15 @@ static int wdtpci_release(struct inode *inode, struct file *file)
  *	fahrenheit. It was designed by an imperial measurement luddite.
  */
 
-static ssize_t wdtpci_temp_read(struct file *file, char __user *buf, size_t count, loff_t *ptr)
+static ssize_t wdtpci_temp_read(struct file *file, char __user *buf,
+						size_t count, loff_t *ptr)
 {
 	int temperature;
 
 	if (wdtpci_get_temperature(&temperature))
 		return -EFAULT;
 
-	if (copy_to_user (buf, &temperature, 1))
+	if (copy_to_user(buf, &temperature, 1))
 		return -EFAULT;
 
 	return 1;
@@ -529,12 +569,10 @@ static int wdtpci_temp_release(struct inode *inode, struct file *file)
  */
 
 static int wdtpci_notify_sys(struct notifier_block *this, unsigned long code,
-	void *unused)
+							void *unused)
 {
-	if (code==SYS_DOWN || code==SYS_HALT) {
-		/* Turn the card off */
+	if (code == SYS_DOWN || code == SYS_HALT)
 		wdtpci_stop();
-	}
 	return NOTIFY_DONE;
 }
 
@@ -547,7 +585,7 @@ static const struct file_operations wdtpci_fops = {
 	.owner		= THIS_MODULE,
 	.llseek		= no_llseek,
 	.write		= wdtpci_write,
-	.ioctl		= wdtpci_ioctl,
+	.unlocked_ioctl	= wdtpci_ioctl,
 	.open		= wdtpci_open,
 	.release	= wdtpci_release,
 };
@@ -584,80 +622,85 @@ static struct notifier_block wdtpci_notifier = {
 };
 
 
-static int __devinit wdtpci_init_one (struct pci_dev *dev,
-				   const struct pci_device_id *ent)
+static int __devinit wdtpci_init_one(struct pci_dev *dev,
+					const struct pci_device_id *ent)
 {
 	int ret = -EIO;
 
 	dev_count++;
 	if (dev_count > 1) {
-		printk (KERN_ERR PFX "this driver only supports 1 device\n");
+		printk(KERN_ERR PFX "This driver only supports one device\n");
 		return -ENODEV;
 	}
 
-	if (pci_enable_device (dev)) {
-		printk (KERN_ERR PFX "Not possible to enable PCI Device\n");
+	if (pci_enable_device(dev)) {
+		printk(KERN_ERR PFX "Not possible to enable PCI Device\n");
 		return -ENODEV;
 	}
 
-	if (pci_resource_start (dev, 2) == 0x0000) {
-		printk (KERN_ERR PFX "No I/O-Address for card detected\n");
+	if (pci_resource_start(dev, 2) == 0x0000) {
+		printk(KERN_ERR PFX "No I/O-Address for card detected\n");
 		ret = -ENODEV;
 		goto out_pci;
 	}
 
-	sema_init(&open_sem, 1);
-
 	irq = dev->irq;
-	io = pci_resource_start (dev, 2);
+	io = pci_resource_start(dev, 2);
 
-	if (request_region (io, 16, "wdt_pci") == NULL) {
-		printk (KERN_ERR PFX "I/O address 0x%04x already in use\n", io);
+	if (request_region(io, 16, "wdt_pci") == NULL) {
+		printk(KERN_ERR PFX "I/O address 0x%04x already in use\n", io);
 		goto out_pci;
 	}
 
-	if (request_irq (irq, wdtpci_interrupt, IRQF_DISABLED | IRQF_SHARED,
+	if (request_irq(irq, wdtpci_interrupt, IRQF_DISABLED | IRQF_SHARED,
 			 "wdt_pci", &wdtpci_miscdev)) {
-		printk (KERN_ERR PFX "IRQ %d is not free\n", irq);
+		printk(KERN_ERR PFX "IRQ %d is not free\n", irq);
 		goto out_reg;
 	}
 
-	printk ("PCI-WDT500/501 (PCI-WDG-CSM) driver 0.10 at 0x%04x (Interrupt %d)\n",
-		io, irq);
+	printk(KERN_INFO
+	 "PCI-WDT500/501 (PCI-WDG-CSM) driver 0.10 at 0x%04x (Interrupt %d)\n",
+								io, irq);
 
-	/* Check that the heartbeat value is within it's range ; if not reset to the default */
+	/* Check that the heartbeat value is within its range;
+	   if not reset to the default */
 	if (wdtpci_set_heartbeat(heartbeat)) {
 		wdtpci_set_heartbeat(WD_TIMO);
-		printk(KERN_INFO PFX "heartbeat value must be 0<heartbeat<65536, using %d\n",
-			WD_TIMO);
+		printk(KERN_INFO PFX
+		  "heartbeat value must be 0 < heartbeat < 65536, using %d\n",
+								WD_TIMO);
 	}
 
-	ret = register_reboot_notifier (&wdtpci_notifier);
+	ret = register_reboot_notifier(&wdtpci_notifier);
 	if (ret) {
-		printk (KERN_ERR PFX "cannot register reboot notifier (err=%d)\n", ret);
+		printk(KERN_ERR PFX
+			"cannot register reboot notifier (err=%d)\n", ret);
 		goto out_irq;
 	}
 
 #ifdef CONFIG_WDT_501_PCI
-	ret = misc_register (&temp_miscdev);
+	ret = misc_register(&temp_miscdev);
 	if (ret) {
-		printk (KERN_ERR PFX "cannot register miscdev on minor=%d (err=%d)\n",
-			TEMP_MINOR, ret);
+		printk(KERN_ERR PFX
+			"cannot register miscdev on minor=%d (err=%d)\n",
+					TEMP_MINOR, ret);
 		goto out_rbt;
 	}
 #endif /* CONFIG_WDT_501_PCI */
 
-	ret = misc_register (&wdtpci_miscdev);
+	ret = misc_register(&wdtpci_miscdev);
 	if (ret) {
-		printk (KERN_ERR PFX "cannot register miscdev on minor=%d (err=%d)\n",
-			WATCHDOG_MINOR, ret);
+		printk(KERN_ERR PFX
+			"cannot register miscdev on minor=%d (err=%d)\n",
+						WATCHDOG_MINOR, ret);
 		goto out_misc;
 	}
 
 	printk(KERN_INFO PFX "initialized. heartbeat=%d sec (nowayout=%d)\n",
 		heartbeat, nowayout);
 #ifdef CONFIG_WDT_501_PCI
-	printk(KERN_INFO "wdt: Fan Tachometer is %s\n", (tachometer ? "Enabled" : "Disabled"));
+	printk(KERN_INFO "wdt: Fan Tachometer is %s\n",
+				(tachometer ? "Enabled" : "Disabled"));
 #endif /* CONFIG_WDT_501_PCI */
 
 	ret = 0;
@@ -673,14 +716,14 @@ out_rbt:
 out_irq:
 	free_irq(irq, &wdtpci_miscdev);
 out_reg:
-	release_region (io, 16);
+	release_region(io, 16);
 out_pci:
 	pci_disable_device(dev);
 	goto out;
 }
 
 
-static void __devexit wdtpci_remove_one (struct pci_dev *pdev)
+static void __devexit wdtpci_remove_one(struct pci_dev *pdev)
 {
 	/* here we assume only one device will ever have
 	 * been picked up and registered by probe function */
@@ -728,7 +771,7 @@ static struct pci_driver wdtpci_driver = {
 
 static void __exit wdtpci_cleanup(void)
 {
-	pci_unregister_driver (&wdtpci_driver);
+	pci_unregister_driver(&wdtpci_driver);
 }
 
 
@@ -742,7 +785,7 @@ static void __exit wdtpci_cleanup(void)
 
 static int __init wdtpci_init(void)
 {
-	return pci_register_driver (&wdtpci_driver);
+	return pci_register_driver(&wdtpci_driver);
 }
 
 
diff --git a/drivers/xen/manage.c b/drivers/xen/manage.c
index a5bc91ae6ff6..d0e87cbe157c 100644
--- a/drivers/xen/manage.c
+++ b/drivers/xen/manage.c
@@ -102,7 +102,7 @@ static void do_suspend(void)
 	/* XXX use normal device tree? */
 	xenbus_suspend();
 
-	err = stop_machine_run(xen_suspend, &cancelled, 0);
+	err = stop_machine(xen_suspend, &cancelled, &cpumask_of_cpu(0));
 	if (err) {
 		printk(KERN_ERR "failed to start xen_suspend: %d\n", err);
 		goto out;
diff --git a/firmware/Makefile b/firmware/Makefile
index 9fe86041f86e..da75a6fbc6ba 100644
--- a/firmware/Makefile
+++ b/firmware/Makefile
@@ -146,15 +146,27 @@ $(patsubst %,$(obj)/%.gen.o, $(fw-external-y)): $(obj)/%.gen.o: $(fwdir)/%
 $(obj)/%: $(obj)/%.ihex | $(objtree)/$(obj)/$$(dir %)
 	$(call cmd,ihex)
 
+# Don't depend on ihex2fw if we're installing and it already exists.
+# Putting it after | in the dependencies doesn't seem sufficient when
+# we're installing after a cross-compile, because ihex2fw has dependencies
+# on stuff like /usr/lib/gcc/ppc64-redhat-linux/4.3.0/include/stddef.h and 
+# thus wants to be rebuilt. Which it can't be, if the prebuilt kernel tree
+# is exported read-only for someone to run 'make install'.
+ifeq ($(INSTALL):$(wildcard $(obj)/ihex2fw),install:$(obj)/ihex2fw)
+ihex2fw_dep :=
+else
+ihex2fw_dep := $(obj)/ihex2fw
+endif
+
 # .HEX is also Intel HEX, but where the offset and length in each record
 # is actually meaningful, because the firmware has to be loaded in a certain
 # order rather than as a single binary blob. Thus, we convert them into our
 # more compact binary representation of ihex records (<linux/ihex.h>)
-$(obj)/%.fw: $(obj)/%.HEX $(obj)/ihex2fw | $(objtree)/$(obj)/$$(dir %)
+$(obj)/%.fw: $(obj)/%.HEX $(ihex2fw_dep) | $(objtree)/$(obj)/$$(dir %)
 	$(call cmd,ihex2fw)
 
 # .H16 is our own modified form of Intel HEX, with 16-bit length for records.
-$(obj)/%.fw: $(obj)/%.H16 $(obj)/ihex2fw | $(objtree)/$(obj)/$$(dir %)
+$(obj)/%.fw: $(obj)/%.H16 $(ihex2fw_dep) | $(objtree)/$(obj)/$$(dir %)
 	$(call cmd,h16tofw)
 
 $(firmware-dirs):
diff --git a/firmware/ihex2fw.c b/firmware/ihex2fw.c
index 660b191ed75e..8f7fdaa9e010 100644
--- a/firmware/ihex2fw.c
+++ b/firmware/ihex2fw.c
@@ -250,19 +250,19 @@ static void file_record(struct ihex_binrec *record)
 
 static int output_records(int outfd)
 {
-	unsigned char zeroes[5] = {0, 0, 0, 0, 0};
+	unsigned char zeroes[6] = {0, 0, 0, 0, 0, 0};
 	struct ihex_binrec *p = records;
 
 	while (p) {
 		uint16_t writelen = (p->len + 9) & ~3;
 
 		p->addr = htonl(p->addr);
-		p->len = htonl(p->len);
+		p->len = htons(p->len);
 		write(outfd, &p->addr, writelen);
 		p = p->next;
 	}
 	/* EOF record is zero length, since we don't bother to represent
 	   the type field in the binary version */
-	write(outfd, zeroes, 5);
+	write(outfd, zeroes, 6);
 	return 0;
 }
diff --git a/fs/9p/vfs_dir.c b/fs/9p/vfs_dir.c
index 88e3787c6ea9..e298fe194093 100644
--- a/fs/9p/vfs_dir.c
+++ b/fs/9p/vfs_dir.c
@@ -119,6 +119,7 @@ int v9fs_dir_release(struct inode *inode, struct file *filp)
 
 const struct file_operations v9fs_dir_operations = {
 	.read = generic_read_dir,
+	.llseek = generic_file_llseek,
 	.readdir = v9fs_dir_readdir,
 	.open = v9fs_file_open,
 	.release = v9fs_dir_release,
diff --git a/fs/Kconfig b/fs/Kconfig
index 37db79a2ff95..abccb5dab9a8 100644
--- a/fs/Kconfig
+++ b/fs/Kconfig
@@ -902,65 +902,7 @@ endif # BLOCK
 
 menu "Pseudo filesystems"
 
-config PROC_FS
-	bool "/proc file system support" if EMBEDDED
-	default y
-	help
-	  This is a virtual file system providing information about the status
-	  of the system. "Virtual" means that it doesn't take up any space on
-	  your hard disk: the files are created on the fly by the kernel when
-	  you try to access them. Also, you cannot read the files with older
-	  version of the program less: you need to use more or cat.
-
-	  It's totally cool; for example, "cat /proc/interrupts" gives
-	  information about what the different IRQs are used for at the moment
-	  (there is a small number of Interrupt ReQuest lines in your computer
-	  that are used by the attached devices to gain the CPU's attention --
-	  often a source of trouble if two devices are mistakenly configured
-	  to use the same IRQ). The program procinfo to display some
-	  information about your system gathered from the /proc file system.
-
-	  Before you can use the /proc file system, it has to be mounted,
-	  meaning it has to be given a location in the directory hierarchy.
-	  That location should be /proc. A command such as "mount -t proc proc
-	  /proc" or the equivalent line in /etc/fstab does the job.
-
-	  The /proc file system is explained in the file
-	  <file:Documentation/filesystems/proc.txt> and on the proc(5) manpage
-	  ("man 5 proc").
-
-	  This option will enlarge your kernel by about 67 KB. Several
-	  programs depend on this, so everyone should say Y here.
-
-config PROC_KCORE
-	bool "/proc/kcore support" if !ARM
-	depends on PROC_FS && MMU
-
-config PROC_VMCORE
-        bool "/proc/vmcore support (EXPERIMENTAL)"
-        depends on PROC_FS && CRASH_DUMP
-	default y
-        help
-        Exports the dump image of crashed kernel in ELF format.
-
-config PROC_SYSCTL
-	bool "Sysctl support (/proc/sys)" if EMBEDDED
-	depends on PROC_FS
-	select SYSCTL
-	default y
-	---help---
-	  The sysctl interface provides a means of dynamically changing
-	  certain kernel parameters and variables on the fly without requiring
-	  a recompile of the kernel or reboot of the system.  The primary
-	  interface is through /proc/sys.  If you say Y here a tree of
-	  modifiable sysctl entries will be generated beneath the
-          /proc/sys directory. They are explained in the files
-	  in <file:Documentation/sysctl/>.  Note that enabling this
-	  option will enlarge the kernel by at least 8 KB.
-
-	  As it is generally a good thing, you should say Y here unless
-	  building a kernel for install/rescue disks or your system is very
-	  limited in memory.
+source "fs/proc/Kconfig"
 
 config SYSFS
 	bool "sysfs file system support" if EMBEDDED
@@ -1441,6 +1383,19 @@ config MINIX_FS
 	  partition (the one containing the directory /) cannot be compiled as
 	  a module.
 
+config OMFS_FS
+	tristate "SonicBlue Optimized MPEG File System support"
+	depends on BLOCK
+	select CRC_ITU_T
+	help
+	  This is the proprietary file system used by the Rio Karma music
+	  player and ReplayTV DVR.  Despite the name, this filesystem is not
+	  more efficient than a standard FS for MPEG files, in fact likely
+	  the opposite is true.  Say Y if you have either of these devices
+	  and wish to mount its disk.
+
+	  To compile this file system support as a module, choose M here: the
+	  module will be called omfs.  If unsure, say N.
 
 config HPFS_FS
 	tristate "OS/2 HPFS file system support"
@@ -1975,6 +1930,16 @@ config CIFS_WEAK_PW_HASH
 
 	  If unsure, say N.
 
+config CIFS_UPCALL
+	  bool "Kerberos/SPNEGO advanced session setup"
+	  depends on CIFS && KEYS
+	  help
+	    Enables an upcall mechanism for CIFS which accesses
+	    userspace helper utilities to provide SPNEGO packaged (RFC 4178)
+	    Kerberos tickets which are needed to mount to certain secure servers
+	    (for which more secure Kerberos authentication is required). If
+	    unsure, say N.
+
 config CIFS_XATTR
         bool "CIFS extended attributes"
         depends on CIFS
@@ -2027,17 +1992,6 @@ config CIFS_EXPERIMENTAL
 	    (which is disabled by default). See the file fs/cifs/README 
 	    for more details.  If unsure, say N.
 
-config CIFS_UPCALL
-	  bool "Kerberos/SPNEGO advanced session setup (EXPERIMENTAL)"
-	  depends on CIFS_EXPERIMENTAL
-	  depends on KEYS
-	  help
-	    Enables an upcall mechanism for CIFS which accesses
-	    userspace helper utilities to provide SPNEGO packaged (RFC 4178)
-	    Kerberos tickets which are needed to mount to certain secure servers
-	    (for which more secure Kerberos authentication is required). If
-	    unsure, say N.
-
 config CIFS_DFS_UPCALL
 	  bool "DFS feature support (EXPERIMENTAL)"
 	  depends on CIFS_EXPERIMENTAL
@@ -2093,20 +2047,6 @@ config CODA_FS
 	  To compile the coda client support as a module, choose M here: the
 	  module will be called coda.
 
-config CODA_FS_OLD_API
-	bool "Use 96-bit Coda file identifiers"
-	depends on CODA_FS
-	help
-	  A new kernel-userspace API had to be introduced for Coda v6.0
-	  to support larger 128-bit file identifiers as needed by the
-	  new realms implementation.
-
-	  However this new API is not backward compatible with older
-	  clients. If you really need to run the old Coda userspace
-	  cache manager then say Y.
-
-	  For most cases you probably want to say N.
-
 config AFS_FS
 	tristate "Andrew File System support (AFS) (EXPERIMENTAL)"
 	depends on INET && EXPERIMENTAL
diff --git a/fs/Kconfig.binfmt b/fs/Kconfig.binfmt
index 3263084eef9e..4a551af6f3fc 100644
--- a/fs/Kconfig.binfmt
+++ b/fs/Kconfig.binfmt
@@ -30,7 +30,7 @@ config COMPAT_BINFMT_ELF
 config BINFMT_ELF_FDPIC
 	bool "Kernel support for FDPIC ELF binaries"
 	default y
-	depends on (FRV || BLACKFIN)
+	depends on (FRV || BLACKFIN || (SUPERH32 && !MMU))
 	help
 	  ELF FDPIC binaries are based on ELF, but allow the individual load
 	  segments of a binary to be located in memory independently of each
diff --git a/fs/Makefile b/fs/Makefile
index 3b2178b4bb66..a1482a5eff15 100644
--- a/fs/Makefile
+++ b/fs/Makefile
@@ -111,6 +111,7 @@ obj-$(CONFIG_ADFS_FS)		+= adfs/
 obj-$(CONFIG_FUSE_FS)		+= fuse/
 obj-$(CONFIG_UDF_FS)		+= udf/
 obj-$(CONFIG_SUN_OPENPROMFS)	+= openpromfs/
+obj-$(CONFIG_OMFS_FS)		+= omfs/
 obj-$(CONFIG_JFS_FS)		+= jfs/
 obj-$(CONFIG_XFS_FS)		+= xfs/
 obj-$(CONFIG_9P_FS)		+= 9p/
diff --git a/fs/adfs/dir.c b/fs/adfs/dir.c
index fc1a8dc64d78..85a30e929800 100644
--- a/fs/adfs/dir.c
+++ b/fs/adfs/dir.c
@@ -197,6 +197,7 @@ out:
 
 const struct file_operations adfs_dir_operations = {
 	.read		= generic_read_dir,
+	.llseek		= generic_file_llseek,
 	.readdir	= adfs_readdir,
 	.fsync		= file_fsync,
 };
diff --git a/fs/adfs/super.c b/fs/adfs/super.c
index 9e421eeb672b..26f3b43726bb 100644
--- a/fs/adfs/super.c
+++ b/fs/adfs/super.c
@@ -249,7 +249,7 @@ static void adfs_destroy_inode(struct inode *inode)
 	kmem_cache_free(adfs_inode_cachep, ADFS_I(inode));
 }
 
-static void init_once(struct kmem_cache *cachep, void *foo)
+static void init_once(void *foo)
 {
 	struct adfs_inode_info *ei = (struct adfs_inode_info *) foo;
 
diff --git a/fs/affs/affs.h b/fs/affs/affs.h
index 223b1917093e..e9ec915f7553 100644
--- a/fs/affs/affs.h
+++ b/fs/affs/affs.h
@@ -2,6 +2,7 @@
 #include <linux/fs.h>
 #include <linux/buffer_head.h>
 #include <linux/amigaffs.h>
+#include <linux/mutex.h>
 
 /* AmigaOS allows file names with up to 30 characters length.
  * Names longer than that will be silently truncated. If you
@@ -98,7 +99,7 @@ struct affs_sb_info {
 	gid_t s_gid;			/* gid to override */
 	umode_t s_mode;			/* mode to override */
 	struct buffer_head *s_root_bh;	/* Cached root block. */
-	struct semaphore s_bmlock;	/* Protects bitmap access. */
+	struct mutex s_bmlock;		/* Protects bitmap access. */
 	struct affs_bm_info *s_bitmap;	/* Bitmap infos. */
 	u32 s_bmap_count;		/* # of bitmap blocks. */
 	u32 s_bmap_bits;		/* # of bits in one bitmap blocks */
diff --git a/fs/affs/bitmap.c b/fs/affs/bitmap.c
index c4a5ad09ddf2..dc5ef14bdc1c 100644
--- a/fs/affs/bitmap.c
+++ b/fs/affs/bitmap.c
@@ -45,14 +45,14 @@ affs_count_free_blocks(struct super_block *sb)
 	if (sb->s_flags & MS_RDONLY)
 		return 0;
 
-	down(&AFFS_SB(sb)->s_bmlock);
+	mutex_lock(&AFFS_SB(sb)->s_bmlock);
 
 	bm = AFFS_SB(sb)->s_bitmap;
 	free = 0;
 	for (i = AFFS_SB(sb)->s_bmap_count; i > 0; bm++, i--)
 		free += bm->bm_free;
 
-	up(&AFFS_SB(sb)->s_bmlock);
+	mutex_unlock(&AFFS_SB(sb)->s_bmlock);
 
 	return free;
 }
@@ -76,7 +76,7 @@ affs_free_block(struct super_block *sb, u32 block)
 	bit     = blk % sbi->s_bmap_bits;
 	bm      = &sbi->s_bitmap[bmap];
 
-	down(&sbi->s_bmlock);
+	mutex_lock(&sbi->s_bmlock);
 
 	bh = sbi->s_bmap_bh;
 	if (sbi->s_last_bmap != bmap) {
@@ -105,19 +105,19 @@ affs_free_block(struct super_block *sb, u32 block)
 	sb->s_dirt = 1;
 	bm->bm_free++;
 
-	up(&sbi->s_bmlock);
+	mutex_unlock(&sbi->s_bmlock);
 	return;
 
 err_free:
 	affs_warning(sb,"affs_free_block","Trying to free block %u which is already free", block);
-	up(&sbi->s_bmlock);
+	mutex_unlock(&sbi->s_bmlock);
 	return;
 
 err_bh_read:
 	affs_error(sb,"affs_free_block","Cannot read bitmap block %u", bm->bm_key);
 	sbi->s_bmap_bh = NULL;
 	sbi->s_last_bmap = ~0;
-	up(&sbi->s_bmlock);
+	mutex_unlock(&sbi->s_bmlock);
 	return;
 
 err_range:
@@ -168,7 +168,7 @@ affs_alloc_block(struct inode *inode, u32 goal)
 	bmap = blk / sbi->s_bmap_bits;
 	bm = &sbi->s_bitmap[bmap];
 
-	down(&sbi->s_bmlock);
+	mutex_lock(&sbi->s_bmlock);
 
 	if (bm->bm_free)
 		goto find_bmap_bit;
@@ -249,7 +249,7 @@ find_bit:
 	mark_buffer_dirty(bh);
 	sb->s_dirt = 1;
 
-	up(&sbi->s_bmlock);
+	mutex_unlock(&sbi->s_bmlock);
 
 	pr_debug("%d\n", blk);
 	return blk;
@@ -259,7 +259,7 @@ err_bh_read:
 	sbi->s_bmap_bh = NULL;
 	sbi->s_last_bmap = ~0;
 err_full:
-	up(&sbi->s_bmlock);
+	mutex_unlock(&sbi->s_bmlock);
 	pr_debug("failed\n");
 	return 0;
 }
diff --git a/fs/affs/dir.c b/fs/affs/dir.c
index 6e3f282424b0..7b36904dbeac 100644
--- a/fs/affs/dir.c
+++ b/fs/affs/dir.c
@@ -19,6 +19,7 @@ static int affs_readdir(struct file *, void *, filldir_t);
 
 const struct file_operations affs_dir_operations = {
 	.read		= generic_read_dir,
+	.llseek		= generic_file_llseek,
 	.readdir	= affs_readdir,
 	.fsync		= file_fsync,
 };
diff --git a/fs/affs/file.c b/fs/affs/file.c
index 6eac7bdeec94..1377b1240b6e 100644
--- a/fs/affs/file.c
+++ b/fs/affs/file.c
@@ -46,8 +46,6 @@ const struct inode_operations affs_file_inode_operations = {
 static int
 affs_file_open(struct inode *inode, struct file *filp)
 {
-	if (atomic_read(&filp->f_count) != 1)
-		return 0;
 	pr_debug("AFFS: open(%lu,%d)\n",
 		 inode->i_ino, atomic_read(&AFFS_I(inode)->i_opencnt));
 	atomic_inc(&AFFS_I(inode)->i_opencnt);
@@ -57,8 +55,6 @@ affs_file_open(struct inode *inode, struct file *filp)
 static int
 affs_file_release(struct inode *inode, struct file *filp)
 {
-	if (atomic_read(&filp->f_count) != 0)
-		return 0;
 	pr_debug("AFFS: release(%lu, %d)\n",
 		 inode->i_ino, atomic_read(&AFFS_I(inode)->i_opencnt));
 
diff --git a/fs/affs/super.c b/fs/affs/super.c
index d214837d5e42..3a89094f93d0 100644
--- a/fs/affs/super.c
+++ b/fs/affs/super.c
@@ -90,7 +90,7 @@ static void affs_destroy_inode(struct inode *inode)
 	kmem_cache_free(affs_inode_cachep, AFFS_I(inode));
 }
 
-static void init_once(struct kmem_cache *cachep, void *foo)
+static void init_once(void *foo)
 {
 	struct affs_inode_info *ei = (struct affs_inode_info *) foo;
 
@@ -290,7 +290,7 @@ static int affs_fill_super(struct super_block *sb, void *data, int silent)
 	if (!sbi)
 		return -ENOMEM;
 	sb->s_fs_info = sbi;
-	init_MUTEX(&sbi->s_bmlock);
+	mutex_init(&sbi->s_bmlock);
 
 	if (!parse_options(data,&uid,&gid,&i,&reserved,&root_block,
 				&blocksize,&sbi->s_prefix,
diff --git a/fs/afs/internal.h b/fs/afs/internal.h
index 7102824ba847..3cb6920ff30b 100644
--- a/fs/afs/internal.h
+++ b/fs/afs/internal.h
@@ -469,8 +469,6 @@ extern bool afs_cm_incoming_call(struct afs_call *);
 extern const struct inode_operations afs_dir_inode_operations;
 extern const struct file_operations afs_dir_file_operations;
 
-extern int afs_permission(struct inode *, int, struct nameidata *);
-
 /*
  * file.c
  */
@@ -605,7 +603,7 @@ extern void afs_clear_permits(struct afs_vnode *);
 extern void afs_cache_permit(struct afs_vnode *, struct key *, long);
 extern void afs_zap_permits(struct rcu_head *);
 extern struct key *afs_request_key(struct afs_cell *);
-extern int afs_permission(struct inode *, int, struct nameidata *);
+extern int afs_permission(struct inode *, int);
 
 /*
  * server.c
diff --git a/fs/afs/mntpt.c b/fs/afs/mntpt.c
index 2f5503902c37..78db4953a800 100644
--- a/fs/afs/mntpt.c
+++ b/fs/afs/mntpt.c
@@ -232,7 +232,7 @@ static void *afs_mntpt_follow_link(struct dentry *dentry, struct nameidata *nd)
 	}
 
 	mntget(newmnt);
-	err = do_add_mount(newmnt, nd, MNT_SHRINKABLE, &afs_vfsmounts);
+	err = do_add_mount(newmnt, &nd->path, MNT_SHRINKABLE, &afs_vfsmounts);
 	switch (err) {
 	case 0:
 		path_put(&nd->path);
diff --git a/fs/afs/security.c b/fs/afs/security.c
index 3bcbeceba1bb..3ef504370034 100644
--- a/fs/afs/security.c
+++ b/fs/afs/security.c
@@ -284,7 +284,7 @@ static int afs_check_permit(struct afs_vnode *vnode, struct key *key,
  * - AFS ACLs are attached to directories only, and a file is controlled by its
  *   parent directory's ACL
  */
-int afs_permission(struct inode *inode, int mask, struct nameidata *nd)
+int afs_permission(struct inode *inode, int mask)
 {
 	struct afs_vnode *vnode = AFS_FS_I(inode);
 	afs_access_t uninitialized_var(access);
diff --git a/fs/afs/super.c b/fs/afs/super.c
index 7e3faeef6818..250d8c4d66e4 100644
--- a/fs/afs/super.c
+++ b/fs/afs/super.c
@@ -27,7 +27,7 @@
 
 #define AFS_FS_MAGIC 0x6B414653 /* 'kAFS' */
 
-static void afs_i_init_once(struct kmem_cache *cachep, void *foo);
+static void afs_i_init_once(void *foo);
 static int afs_get_sb(struct file_system_type *fs_type,
 		      int flags, const char *dev_name,
 		      void *data, struct vfsmount *mnt);
@@ -449,7 +449,7 @@ static void afs_put_super(struct super_block *sb)
 /*
  * initialise an inode cache slab element prior to any use
  */
-static void afs_i_init_once(struct kmem_cache *cachep, void *_vnode)
+static void afs_i_init_once(void *_vnode)
 {
 	struct afs_vnode *vnode = _vnode;
 
diff --git a/fs/afs/write.c b/fs/afs/write.c
index 9a849ad3c489..065b4e10681a 100644
--- a/fs/afs/write.c
+++ b/fs/afs/write.c
@@ -404,7 +404,7 @@ static int afs_write_back_from_locked_page(struct afs_writeback *wb,
 			page = pages[loop];
 			if (page->index > wb->last)
 				break;
-			if (TestSetPageLocked(page))
+			if (!trylock_page(page))
 				break;
 			if (!PageDirty(page) ||
 			    page_private(page) != (unsigned long) wb) {
diff --git a/fs/aio.c b/fs/aio.c
index 0fb3117ddd93..f658441d5666 100644
--- a/fs/aio.c
+++ b/fs/aio.c
@@ -512,8 +512,8 @@ static void aio_fput_routine(struct work_struct *data)
  */
 static int __aio_put_req(struct kioctx *ctx, struct kiocb *req)
 {
-	dprintk(KERN_DEBUG "aio_put(%p): f_count=%d\n",
-		req, atomic_read(&req->ki_filp->f_count));
+	dprintk(KERN_DEBUG "aio_put(%p): f_count=%ld\n",
+		req, atomic_long_read(&req->ki_filp->f_count));
 
 	assert_spin_locked(&ctx->ctx_lock);
 
@@ -528,7 +528,7 @@ static int __aio_put_req(struct kioctx *ctx, struct kiocb *req)
 	/* Must be done under the lock to serialise against cancellation.
 	 * Call this aio_fput as it duplicates fput via the fput_work.
 	 */
-	if (unlikely(atomic_dec_and_test(&req->ki_filp->f_count))) {
+	if (unlikely(atomic_long_dec_and_test(&req->ki_filp->f_count))) {
 		get_ioctx(ctx);
 		spin_lock(&fput_lock);
 		list_add(&req->ki_list, &fput_head);
@@ -586,7 +586,6 @@ static void use_mm(struct mm_struct *mm)
 	struct task_struct *tsk = current;
 
 	task_lock(tsk);
-	tsk->flags |= PF_BORROWED_MM;
 	active_mm = tsk->active_mm;
 	atomic_inc(&mm->mm_count);
 	tsk->mm = mm;
@@ -610,7 +609,6 @@ static void unuse_mm(struct mm_struct *mm)
 	struct task_struct *tsk = current;
 
 	task_lock(tsk);
-	tsk->flags &= ~PF_BORROWED_MM;
 	tsk->mm = NULL;
 	/* active_mm is still 'mm' */
 	enter_lazy_tlb(mm, tsk);
diff --git a/fs/attr.c b/fs/attr.c
index 966b73e25f82..26c71ba1eed4 100644
--- a/fs/attr.c
+++ b/fs/attr.c
@@ -51,7 +51,7 @@ int inode_change_ok(struct inode *inode, struct iattr *attr)
 	}
 
 	/* Check for setting the inode time. */
-	if (ia_valid & (ATTR_MTIME_SET | ATTR_ATIME_SET)) {
+	if (ia_valid & (ATTR_MTIME_SET | ATTR_ATIME_SET | ATTR_TIMES_SET)) {
 		if (!is_owner_or_cap(inode))
 			goto error;
 	}
@@ -108,6 +108,11 @@ int notify_change(struct dentry * dentry, struct iattr * attr)
 	struct timespec now;
 	unsigned int ia_valid = attr->ia_valid;
 
+	if (ia_valid & (ATTR_MODE | ATTR_UID | ATTR_GID | ATTR_TIMES_SET)) {
+		if (IS_IMMUTABLE(inode) || IS_APPEND(inode))
+			return -EPERM;
+	}
+
 	now = current_fs_time(inode->i_sb);
 
 	attr->ia_ctime = now;
diff --git a/fs/autofs4/root.c b/fs/autofs4/root.c
index bcfb2dc0a61b..2a41c2a7fc52 100644
--- a/fs/autofs4/root.c
+++ b/fs/autofs4/root.c
@@ -36,6 +36,7 @@ const struct file_operations autofs4_root_operations = {
 	.release	= dcache_dir_close,
 	.read		= generic_read_dir,
 	.readdir	= dcache_readdir,
+	.llseek		= dcache_dir_lseek,
 	.ioctl		= autofs4_root_ioctl,
 };
 
@@ -44,6 +45,7 @@ const struct file_operations autofs4_dir_operations = {
 	.release	= dcache_dir_close,
 	.read		= generic_read_dir,
 	.readdir	= dcache_readdir,
+	.llseek		= dcache_dir_lseek,
 };
 
 const struct inode_operations autofs4_indirect_root_inode_operations = {
diff --git a/fs/bad_inode.c b/fs/bad_inode.c
index f1c2ea8342f5..5f1538c03b1b 100644
--- a/fs/bad_inode.c
+++ b/fs/bad_inode.c
@@ -243,8 +243,7 @@ static int bad_inode_readlink(struct dentry *dentry, char __user *buffer,
 	return -EIO;
 }
 
-static int bad_inode_permission(struct inode *inode, int mask,
-			struct nameidata *nd)
+static int bad_inode_permission(struct inode *inode, int mask)
 {
 	return -EIO;
 }
diff --git a/fs/befs/linuxvfs.c b/fs/befs/linuxvfs.c
index e8717de3bab3..740f53672a8a 100644
--- a/fs/befs/linuxvfs.c
+++ b/fs/befs/linuxvfs.c
@@ -66,6 +66,7 @@ static struct kmem_cache *befs_inode_cachep;
 static const struct file_operations befs_dir_operations = {
 	.read		= generic_read_dir,
 	.readdir	= befs_readdir,
+	.llseek		= generic_file_llseek,
 };
 
 static const struct inode_operations befs_dir_inode_operations = {
@@ -289,7 +290,7 @@ befs_destroy_inode(struct inode *inode)
         kmem_cache_free(befs_inode_cachep, BEFS_I(inode));
 }
 
-static void init_once(struct kmem_cache *cachep, void *foo)
+static void init_once(void *foo)
 {
         struct befs_inode_info *bi = (struct befs_inode_info *) foo;
 
diff --git a/fs/bfs/bfs.h b/fs/bfs/bfs.h
index 70f5d3a8eede..7109e451abf7 100644
--- a/fs/bfs/bfs.h
+++ b/fs/bfs/bfs.h
@@ -16,8 +16,9 @@ struct bfs_sb_info {
 	unsigned long si_freei;
 	unsigned long si_lf_eblk;
 	unsigned long si_lasti;
-	unsigned long * si_imap;
-	struct buffer_head * si_sbh;		/* buffer header w/superblock */
+	unsigned long *si_imap;
+	struct buffer_head *si_sbh;		/* buffer header w/superblock */
+	struct mutex bfs_lock;
 };
 
 /*
diff --git a/fs/bfs/dir.c b/fs/bfs/dir.c
index 034950cb3cbe..87ee5ccee348 100644
--- a/fs/bfs/dir.c
+++ b/fs/bfs/dir.c
@@ -32,16 +32,17 @@ static int bfs_readdir(struct file *f, void *dirent, filldir_t filldir)
 	struct inode *dir = f->f_path.dentry->d_inode;
 	struct buffer_head *bh;
 	struct bfs_dirent *de;
+	struct bfs_sb_info *info = BFS_SB(dir->i_sb);
 	unsigned int offset;
 	int block;
 
-	lock_kernel();
+	mutex_lock(&info->bfs_lock);
 
 	if (f->f_pos & (BFS_DIRENT_SIZE - 1)) {
 		printf("Bad f_pos=%08lx for %s:%08lx\n",
 					(unsigned long)f->f_pos,
 					dir->i_sb->s_id, dir->i_ino);
-		unlock_kernel();
+		mutex_unlock(&info->bfs_lock);
 		return -EBADF;
 	}
 
@@ -61,7 +62,7 @@ static int bfs_readdir(struct file *f, void *dirent, filldir_t filldir)
 						le16_to_cpu(de->ino),
 						DT_UNKNOWN) < 0) {
 					brelse(bh);
-					unlock_kernel();
+					mutex_unlock(&info->bfs_lock);
 					return 0;
 				}
 			}
@@ -71,7 +72,7 @@ static int bfs_readdir(struct file *f, void *dirent, filldir_t filldir)
 		brelse(bh);
 	}
 
-	unlock_kernel();
+	mutex_unlock(&info->bfs_lock);
 	return 0;	
 }
 
@@ -95,10 +96,10 @@ static int bfs_create(struct inode *dir, struct dentry *dentry, int mode,
 	inode = new_inode(s);
 	if (!inode)
 		return -ENOSPC;
-	lock_kernel();
+	mutex_lock(&info->bfs_lock);
 	ino = find_first_zero_bit(info->si_imap, info->si_lasti);
 	if (ino > info->si_lasti) {
-		unlock_kernel();
+		mutex_unlock(&info->bfs_lock);
 		iput(inode);
 		return -ENOSPC;
 	}
@@ -125,10 +126,10 @@ static int bfs_create(struct inode *dir, struct dentry *dentry, int mode,
 	if (err) {
 		inode_dec_link_count(inode);
 		iput(inode);
-		unlock_kernel();
+		mutex_unlock(&info->bfs_lock);
 		return err;
 	}
-	unlock_kernel();
+	mutex_unlock(&info->bfs_lock);
 	d_instantiate(dentry, inode);
 	return 0;
 }
@@ -139,22 +140,23 @@ static struct dentry *bfs_lookup(struct inode *dir, struct dentry *dentry,
 	struct inode *inode = NULL;
 	struct buffer_head *bh;
 	struct bfs_dirent *de;
+	struct bfs_sb_info *info = BFS_SB(dir->i_sb);
 
 	if (dentry->d_name.len > BFS_NAMELEN)
 		return ERR_PTR(-ENAMETOOLONG);
 
-	lock_kernel();
+	mutex_lock(&info->bfs_lock);
 	bh = bfs_find_entry(dir, dentry->d_name.name, dentry->d_name.len, &de);
 	if (bh) {
 		unsigned long ino = (unsigned long)le16_to_cpu(de->ino);
 		brelse(bh);
 		inode = bfs_iget(dir->i_sb, ino);
 		if (IS_ERR(inode)) {
-			unlock_kernel();
+			mutex_unlock(&info->bfs_lock);
 			return ERR_CAST(inode);
 		}
 	}
-	unlock_kernel();
+	mutex_unlock(&info->bfs_lock);
 	d_add(dentry, inode);
 	return NULL;
 }
@@ -163,13 +165,14 @@ static int bfs_link(struct dentry *old, struct inode *dir,
 						struct dentry *new)
 {
 	struct inode *inode = old->d_inode;
+	struct bfs_sb_info *info = BFS_SB(inode->i_sb);
 	int err;
 
-	lock_kernel();
+	mutex_lock(&info->bfs_lock);
 	err = bfs_add_entry(dir, new->d_name.name, new->d_name.len,
 							inode->i_ino);
 	if (err) {
-		unlock_kernel();
+		mutex_unlock(&info->bfs_lock);
 		return err;
 	}
 	inc_nlink(inode);
@@ -177,19 +180,19 @@ static int bfs_link(struct dentry *old, struct inode *dir,
 	mark_inode_dirty(inode);
 	atomic_inc(&inode->i_count);
 	d_instantiate(new, inode);
-	unlock_kernel();
+	mutex_unlock(&info->bfs_lock);
 	return 0;
 }
 
 static int bfs_unlink(struct inode *dir, struct dentry *dentry)
 {
 	int error = -ENOENT;
-	struct inode *inode;
+	struct inode *inode = dentry->d_inode;
 	struct buffer_head *bh;
 	struct bfs_dirent *de;
+	struct bfs_sb_info *info = BFS_SB(inode->i_sb);
 
-	inode = dentry->d_inode;
-	lock_kernel();
+	mutex_lock(&info->bfs_lock);
 	bh = bfs_find_entry(dir, dentry->d_name.name, dentry->d_name.len, &de);
 	if (!bh || (le16_to_cpu(de->ino) != inode->i_ino))
 		goto out_brelse;
@@ -210,7 +213,7 @@ static int bfs_unlink(struct inode *dir, struct dentry *dentry)
 
 out_brelse:
 	brelse(bh);
-	unlock_kernel();
+	mutex_unlock(&info->bfs_lock);
 	return error;
 }
 
@@ -220,6 +223,7 @@ static int bfs_rename(struct inode *old_dir, struct dentry *old_dentry,
 	struct inode *old_inode, *new_inode;
 	struct buffer_head *old_bh, *new_bh;
 	struct bfs_dirent *old_de, *new_de;
+	struct bfs_sb_info *info;
 	int error = -ENOENT;
 
 	old_bh = new_bh = NULL;
@@ -227,7 +231,9 @@ static int bfs_rename(struct inode *old_dir, struct dentry *old_dentry,
 	if (S_ISDIR(old_inode->i_mode))
 		return -EINVAL;
 
-	lock_kernel();
+	info = BFS_SB(old_inode->i_sb);
+
+	mutex_lock(&info->bfs_lock);
 	old_bh = bfs_find_entry(old_dir, 
 				old_dentry->d_name.name, 
 				old_dentry->d_name.len, &old_de);
@@ -264,7 +270,7 @@ static int bfs_rename(struct inode *old_dir, struct dentry *old_dentry,
 	error = 0;
 
 end_rename:
-	unlock_kernel();
+	mutex_unlock(&info->bfs_lock);
 	brelse(old_bh);
 	brelse(new_bh);
 	return error;
diff --git a/fs/bfs/file.c b/fs/bfs/file.c
index b11e63e8fbcd..6a021265f018 100644
--- a/fs/bfs/file.c
+++ b/fs/bfs/file.c
@@ -99,7 +99,7 @@ static int bfs_get_block(struct inode *inode, sector_t block,
 		return -ENOSPC;
 
 	/* The rest has to be protected against itself. */
-	lock_kernel();
+	mutex_lock(&info->bfs_lock);
 
 	/*
 	 * If the last data block for this file is the last allocated
@@ -151,7 +151,7 @@ static int bfs_get_block(struct inode *inode, sector_t block,
 	mark_buffer_dirty(sbh);
 	map_bh(bh_result, sb, phys);
 out:
-	unlock_kernel();
+	mutex_unlock(&info->bfs_lock);
 	return err;
 }
 
diff --git a/fs/bfs/inode.c b/fs/bfs/inode.c
index 8db623838b50..0ed57b5ee012 100644
--- a/fs/bfs/inode.c
+++ b/fs/bfs/inode.c
@@ -104,6 +104,7 @@ static int bfs_write_inode(struct inode *inode, int unused)
 	struct bfs_inode *di;
 	struct buffer_head *bh;
 	int block, off;
+	struct bfs_sb_info *info = BFS_SB(inode->i_sb);
 
         dprintf("ino=%08x\n", ino);
 
@@ -112,13 +113,13 @@ static int bfs_write_inode(struct inode *inode, int unused)
 		return -EIO;
 	}
 
-	lock_kernel();
+	mutex_lock(&info->bfs_lock);
 	block = (ino - BFS_ROOT_INO) / BFS_INODES_PER_BLOCK + 1;
 	bh = sb_bread(inode->i_sb, block);
 	if (!bh) {
 		printf("Unable to read inode %s:%08x\n",
 				inode->i_sb->s_id, ino);
-		unlock_kernel();
+		mutex_unlock(&info->bfs_lock);
 		return -EIO;
 	}
 
@@ -145,7 +146,7 @@ static int bfs_write_inode(struct inode *inode, int unused)
 
 	mark_buffer_dirty(bh);
 	brelse(bh);
-	unlock_kernel();
+	mutex_unlock(&info->bfs_lock);
 	return 0;
 }
 
@@ -170,7 +171,7 @@ static void bfs_delete_inode(struct inode *inode)
 	
 	inode->i_size = 0;
 	inode->i_atime = inode->i_mtime = inode->i_ctime = CURRENT_TIME_SEC;
-	lock_kernel();
+	mutex_lock(&info->bfs_lock);
 	mark_inode_dirty(inode);
 
 	block = (ino - BFS_ROOT_INO) / BFS_INODES_PER_BLOCK + 1;
@@ -178,7 +179,7 @@ static void bfs_delete_inode(struct inode *inode)
 	if (!bh) {
 		printf("Unable to read inode %s:%08lx\n",
 					inode->i_sb->s_id, ino);
-		unlock_kernel();
+		mutex_unlock(&info->bfs_lock);
 		return;
 	}
 	off = (ino - BFS_ROOT_INO) % BFS_INODES_PER_BLOCK;
@@ -204,14 +205,16 @@ static void bfs_delete_inode(struct inode *inode)
 		info->si_lf_eblk = bi->i_sblock - 1;
 		mark_buffer_dirty(info->si_sbh);
 	}
-	unlock_kernel();
+	mutex_unlock(&info->bfs_lock);
 	clear_inode(inode);
 }
 
 static void bfs_put_super(struct super_block *s)
 {
 	struct bfs_sb_info *info = BFS_SB(s);
+
 	brelse(info->si_sbh);
+	mutex_destroy(&info->bfs_lock);
 	kfree(info->si_imap);
 	kfree(info);
 	s->s_fs_info = NULL;
@@ -236,11 +239,13 @@ static int bfs_statfs(struct dentry *dentry, struct kstatfs *buf)
 
 static void bfs_write_super(struct super_block *s)
 {
-	lock_kernel();
+	struct bfs_sb_info *info = BFS_SB(s);
+
+	mutex_lock(&info->bfs_lock);
 	if (!(s->s_flags & MS_RDONLY))
-		mark_buffer_dirty(BFS_SB(s)->si_sbh);
+		mark_buffer_dirty(info->si_sbh);
 	s->s_dirt = 0;
-	unlock_kernel();
+	mutex_unlock(&info->bfs_lock);
 }
 
 static struct kmem_cache *bfs_inode_cachep;
@@ -259,7 +264,7 @@ static void bfs_destroy_inode(struct inode *inode)
 	kmem_cache_free(bfs_inode_cachep, BFS_I(inode));
 }
 
-static void init_once(struct kmem_cache *cachep, void *foo)
+static void init_once(void *foo)
 {
 	struct bfs_inode_info *bi = foo;
 
@@ -380,7 +385,7 @@ static int bfs_fill_super(struct super_block *s, void *data, int silent)
 		struct bfs_inode *di;
 		int block = (i - BFS_ROOT_INO) / BFS_INODES_PER_BLOCK + 1;
 		int off = (i - BFS_ROOT_INO) % BFS_INODES_PER_BLOCK;
-		unsigned long sblock, eblock;
+		unsigned long eblock;
 
 		if (!off) {
 			brelse(bh);
@@ -399,7 +404,6 @@ static int bfs_fill_super(struct super_block *s, void *data, int silent)
 		set_bit(i, info->si_imap);
 		info->si_freeb -= BFS_FILEBLOCKS(di);
 
-		sblock =  le32_to_cpu(di->i_sblock);
 		eblock =  le32_to_cpu(di->i_eblock);
 		if (eblock > info->si_lf_eblk)
 			info->si_lf_eblk = eblock;
@@ -410,6 +414,7 @@ static int bfs_fill_super(struct super_block *s, void *data, int silent)
 		s->s_dirt = 1;
 	} 
 	dump_imap("read_super", s);
+	mutex_init(&info->bfs_lock);
 	return 0;
 
 out:
diff --git a/fs/binfmt_aout.c b/fs/binfmt_aout.c
index ba4cddb92f1d..204cfd1d7676 100644
--- a/fs/binfmt_aout.c
+++ b/fs/binfmt_aout.c
@@ -444,12 +444,6 @@ beyond_if:
 	regs->gp = ex.a_gpvalue;
 #endif
 	start_thread(regs, ex.a_entry, current->mm->start_stack);
-	if (unlikely(current->ptrace & PT_PTRACED)) {
-		if (current->ptrace & PT_TRACE_EXEC)
-			ptrace_notify ((PTRACE_EVENT_EXEC << 8) | SIGTRAP);
-		else
-			send_sig(SIGTRAP, current, 0);
-	}
 	return 0;
 }
 
diff --git a/fs/binfmt_elf.c b/fs/binfmt_elf.c
index 639d2d8b5710..655ed8d30a86 100644
--- a/fs/binfmt_elf.c
+++ b/fs/binfmt_elf.c
@@ -131,6 +131,15 @@ static int padzero(unsigned long elf_bss)
 #define STACK_ALLOC(sp, len) ({ sp -= len ; sp; })
 #endif
 
+#ifndef ELF_BASE_PLATFORM
+/*
+ * AT_BASE_PLATFORM indicates the "real" hardware/microarchitecture.
+ * If the arch defines ELF_BASE_PLATFORM (in asm/elf.h), the value
+ * will be copied to the user stack in the same manner as AT_PLATFORM.
+ */
+#define ELF_BASE_PLATFORM NULL
+#endif
+
 static int
 create_elf_tables(struct linux_binprm *bprm, struct elfhdr *exec,
 		unsigned long load_addr, unsigned long interp_load_addr)
@@ -142,7 +151,9 @@ create_elf_tables(struct linux_binprm *bprm, struct elfhdr *exec,
 	elf_addr_t __user *envp;
 	elf_addr_t __user *sp;
 	elf_addr_t __user *u_platform;
+	elf_addr_t __user *u_base_platform;
 	const char *k_platform = ELF_PLATFORM;
+	const char *k_base_platform = ELF_BASE_PLATFORM;
 	int items;
 	elf_addr_t *elf_info;
 	int ei_index = 0;
@@ -172,6 +183,19 @@ create_elf_tables(struct linux_binprm *bprm, struct elfhdr *exec,
 			return -EFAULT;
 	}
 
+	/*
+	 * If this architecture has a "base" platform capability
+	 * string, copy it to userspace.
+	 */
+	u_base_platform = NULL;
+	if (k_base_platform) {
+		size_t len = strlen(k_base_platform) + 1;
+
+		u_base_platform = (elf_addr_t __user *)STACK_ALLOC(p, len);
+		if (__copy_to_user(u_base_platform, k_base_platform, len))
+			return -EFAULT;
+	}
+
 	/* Create the ELF interpreter info */
 	elf_info = (elf_addr_t *)current->mm->saved_auxv;
 	/* update AT_VECTOR_SIZE_BASE if the number of NEW_AUX_ENT() changes */
@@ -209,6 +233,10 @@ create_elf_tables(struct linux_binprm *bprm, struct elfhdr *exec,
 		NEW_AUX_ENT(AT_PLATFORM,
 			    (elf_addr_t)(unsigned long)u_platform);
 	}
+	if (k_base_platform) {
+		NEW_AUX_ENT(AT_BASE_PLATFORM,
+			    (elf_addr_t)(unsigned long)u_base_platform);
+	}
 	if (bprm->interp_flags & BINPRM_FLAGS_EXECFD) {
 		NEW_AUX_ENT(AT_EXECFD, bprm->interp_data);
 	}
@@ -975,12 +1003,6 @@ static int load_elf_binary(struct linux_binprm *bprm, struct pt_regs *regs)
 #endif
 
 	start_thread(regs, elf_entry, bprm->p);
-	if (unlikely(current->ptrace & PT_PTRACED)) {
-		if (current->ptrace & PT_TRACE_EXEC)
-			ptrace_notify ((PTRACE_EVENT_EXEC << 8) | SIGTRAP);
-		else
-			send_sig(SIGTRAP, current, 0);
-	}
 	retval = 0;
 out:
 	kfree(loc);
@@ -1478,7 +1500,7 @@ static int fill_note_info(struct elfhdr *elf, int phdrs,
 	const struct user_regset_view *view = task_user_regset_view(dump_task);
 	struct elf_thread_core_info *t;
 	struct elf_prpsinfo *psinfo;
-	struct task_struct *g, *p;
+	struct core_thread *ct;
 	unsigned int i;
 
 	info->size = 0;
@@ -1517,31 +1539,26 @@ static int fill_note_info(struct elfhdr *elf, int phdrs,
 	/*
 	 * Allocate a structure for each thread.
 	 */
-	rcu_read_lock();
-	do_each_thread(g, p)
-		if (p->mm == dump_task->mm) {
-			t = kzalloc(offsetof(struct elf_thread_core_info,
-					     notes[info->thread_notes]),
-				    GFP_ATOMIC);
-			if (unlikely(!t)) {
-				rcu_read_unlock();
-				return 0;
-			}
-			t->task = p;
-			if (p == dump_task || !info->thread) {
-				t->next = info->thread;
-				info->thread = t;
-			} else {
-				/*
-				 * Make sure to keep the original task at
-				 * the head of the list.
-				 */
-				t->next = info->thread->next;
-				info->thread->next = t;
-			}
+	for (ct = &dump_task->mm->core_state->dumper; ct; ct = ct->next) {
+		t = kzalloc(offsetof(struct elf_thread_core_info,
+				     notes[info->thread_notes]),
+			    GFP_KERNEL);
+		if (unlikely(!t))
+			return 0;
+
+		t->task = ct->task;
+		if (ct->task == dump_task || !info->thread) {
+			t->next = info->thread;
+			info->thread = t;
+		} else {
+			/*
+			 * Make sure to keep the original task at
+			 * the head of the list.
+			 */
+			t->next = info->thread->next;
+			info->thread->next = t;
 		}
-	while_each_thread(g, p);
-	rcu_read_unlock();
+	}
 
 	/*
 	 * Now fill in each thread's information.
@@ -1688,7 +1705,6 @@ static int fill_note_info(struct elfhdr *elf, int phdrs,
 {
 #define	NUM_NOTES	6
 	struct list_head *t;
-	struct task_struct *g, *p;
 
 	info->notes = NULL;
 	info->prstatus = NULL;
@@ -1720,20 +1736,19 @@ static int fill_note_info(struct elfhdr *elf, int phdrs,
 
 	info->thread_status_size = 0;
 	if (signr) {
+		struct core_thread *ct;
 		struct elf_thread_status *ets;
-		rcu_read_lock();
-		do_each_thread(g, p)
-			if (current->mm == p->mm && current != p) {
-				ets = kzalloc(sizeof(*ets), GFP_ATOMIC);
-				if (!ets) {
-					rcu_read_unlock();
-					return 0;
-				}
-				ets->thread = p;
-				list_add(&ets->list, &info->thread_list);
-			}
-		while_each_thread(g, p);
-		rcu_read_unlock();
+
+		for (ct = current->mm->core_state->dumper.next;
+						ct; ct = ct->next) {
+			ets = kzalloc(sizeof(*ets), GFP_KERNEL);
+			if (!ets)
+				return 0;
+
+			ets->thread = ct->task;
+			list_add(&ets->list, &info->thread_list);
+		}
+
 		list_for_each(t, &info->thread_list) {
 			int sz;
 
diff --git a/fs/binfmt_elf_fdpic.c b/fs/binfmt_elf_fdpic.c
index d051a32e6270..80c1f952ef78 100644
--- a/fs/binfmt_elf_fdpic.c
+++ b/fs/binfmt_elf_fdpic.c
@@ -433,13 +433,6 @@ static int load_elf_fdpic_binary(struct linux_binprm *bprm,
 	entryaddr = interp_params.entry_addr ?: exec_params.entry_addr;
 	start_thread(regs, entryaddr, current->mm->start_stack);
 
-	if (unlikely(current->ptrace & PT_PTRACED)) {
-		if (current->ptrace & PT_TRACE_EXEC)
-			ptrace_notify((PTRACE_EVENT_EXEC << 8) | SIGTRAP);
-		else
-			send_sig(SIGTRAP, current, 0);
-	}
-
 	retval = 0;
 
 error:
@@ -477,6 +470,7 @@ static int create_elf_fdpic_tables(struct linux_binprm *bprm,
 	char __user *u_platform, *p;
 	long hwcap;
 	int loop;
+	int nr;	/* reset for each csp adjustment */
 
 	/* we're going to shovel a whole load of stuff onto the stack */
 #ifdef CONFIG_MMU
@@ -549,10 +543,7 @@ static int create_elf_fdpic_tables(struct linux_binprm *bprm,
 	/* force 16 byte _final_ alignment here for generality */
 #define DLINFO_ITEMS 13
 
-	nitems = 1 + DLINFO_ITEMS + (k_platform ? 1 : 0);
-#ifdef DLINFO_ARCH_ITEMS
-	nitems += DLINFO_ARCH_ITEMS;
-#endif
+	nitems = 1 + DLINFO_ITEMS + (k_platform ? 1 : 0) + AT_VECTOR_SIZE_ARCH;
 
 	csp = sp;
 	sp -= nitems * 2 * sizeof(unsigned long);
@@ -564,39 +555,46 @@ static int create_elf_fdpic_tables(struct linux_binprm *bprm,
 	sp -= sp & 15UL;
 
 	/* put the ELF interpreter info on the stack */
-#define NEW_AUX_ENT(nr, id, val)					\
+#define NEW_AUX_ENT(id, val)						\
 	do {								\
 		struct { unsigned long _id, _val; } __user *ent;	\
 									\
 		ent = (void __user *) csp;				\
 		__put_user((id), &ent[nr]._id);				\
 		__put_user((val), &ent[nr]._val);			\
+		nr++;							\
 	} while (0)
 
+	nr = 0;
 	csp -= 2 * sizeof(unsigned long);
-	NEW_AUX_ENT(0, AT_NULL, 0);
+	NEW_AUX_ENT(AT_NULL, 0);
 	if (k_platform) {
+		nr = 0;
 		csp -= 2 * sizeof(unsigned long);
-		NEW_AUX_ENT(0, AT_PLATFORM,
+		NEW_AUX_ENT(AT_PLATFORM,
 			    (elf_addr_t) (unsigned long) u_platform);
 	}
 
+	nr = 0;
 	csp -= DLINFO_ITEMS * 2 * sizeof(unsigned long);
-	NEW_AUX_ENT( 0, AT_HWCAP,	hwcap);
-	NEW_AUX_ENT( 1, AT_PAGESZ,	PAGE_SIZE);
-	NEW_AUX_ENT( 2, AT_CLKTCK,	CLOCKS_PER_SEC);
-	NEW_AUX_ENT( 3, AT_PHDR,	exec_params->ph_addr);
-	NEW_AUX_ENT( 4, AT_PHENT,	sizeof(struct elf_phdr));
-	NEW_AUX_ENT( 5, AT_PHNUM,	exec_params->hdr.e_phnum);
-	NEW_AUX_ENT( 6,	AT_BASE,	interp_params->elfhdr_addr);
-	NEW_AUX_ENT( 7, AT_FLAGS,	0);
-	NEW_AUX_ENT( 8, AT_ENTRY,	exec_params->entry_addr);
-	NEW_AUX_ENT( 9, AT_UID,		(elf_addr_t) current->uid);
-	NEW_AUX_ENT(10, AT_EUID,	(elf_addr_t) current->euid);
-	NEW_AUX_ENT(11, AT_GID,		(elf_addr_t) current->gid);
-	NEW_AUX_ENT(12, AT_EGID,	(elf_addr_t) current->egid);
+	NEW_AUX_ENT(AT_HWCAP,	hwcap);
+	NEW_AUX_ENT(AT_PAGESZ,	PAGE_SIZE);
+	NEW_AUX_ENT(AT_CLKTCK,	CLOCKS_PER_SEC);
+	NEW_AUX_ENT(AT_PHDR,	exec_params->ph_addr);
+	NEW_AUX_ENT(AT_PHENT,	sizeof(struct elf_phdr));
+	NEW_AUX_ENT(AT_PHNUM,	exec_params->hdr.e_phnum);
+	NEW_AUX_ENT(AT_BASE,	interp_params->elfhdr_addr);
+	NEW_AUX_ENT(AT_FLAGS,	0);
+	NEW_AUX_ENT(AT_ENTRY,	exec_params->entry_addr);
+	NEW_AUX_ENT(AT_UID,	(elf_addr_t) current->uid);
+	NEW_AUX_ENT(AT_EUID,	(elf_addr_t) current->euid);
+	NEW_AUX_ENT(AT_GID,	(elf_addr_t) current->gid);
+	NEW_AUX_ENT(AT_EGID,	(elf_addr_t) current->egid);
 
 #ifdef ARCH_DLINFO
+	nr = 0;
+	csp -= AT_VECTOR_SIZE_ARCH * 2 * sizeof(unsigned long);
+
 	/* ARCH_DLINFO must come last so platform specific code can enforce
 	 * special alignment requirements on the AUXV if necessary (eg. PPC).
 	 */
@@ -1573,7 +1571,6 @@ static int elf_fdpic_core_dump(long signr, struct pt_regs *regs,
 	struct memelfnote *notes = NULL;
 	struct elf_prstatus *prstatus = NULL;	/* NT_PRSTATUS */
 	struct elf_prpsinfo *psinfo = NULL;	/* NT_PRPSINFO */
- 	struct task_struct *g, *p;
  	LIST_HEAD(thread_list);
  	struct list_head *t;
 	elf_fpregset_t *fpu = NULL;
@@ -1622,20 +1619,19 @@ static int elf_fdpic_core_dump(long signr, struct pt_regs *regs,
 #endif
 
 	if (signr) {
+		struct core_thread *ct;
 		struct elf_thread_status *tmp;
-		rcu_read_lock();
-		do_each_thread(g,p)
-			if (current->mm == p->mm && current != p) {
-				tmp = kzalloc(sizeof(*tmp), GFP_ATOMIC);
-				if (!tmp) {
-					rcu_read_unlock();
-					goto cleanup;
-				}
-				tmp->thread = p;
-				list_add(&tmp->list, &thread_list);
-			}
-		while_each_thread(g,p);
-		rcu_read_unlock();
+
+		for (ct = current->mm->core_state->dumper.next;
+						ct; ct = ct->next) {
+			tmp = kzalloc(sizeof(*tmp), GFP_KERNEL);
+			if (!tmp)
+				goto cleanup;
+
+			tmp->thread = ct->task;
+			list_add(&tmp->list, &thread_list);
+		}
+
 		list_for_each(t, &thread_list) {
 			struct elf_thread_status *tmp;
 			int sz;
diff --git a/fs/binfmt_flat.c b/fs/binfmt_flat.c
index 2cb1acda3a82..dfc0197905ca 100644
--- a/fs/binfmt_flat.c
+++ b/fs/binfmt_flat.c
@@ -914,15 +914,14 @@ static int load_flat_binary(struct linux_binprm * bprm, struct pt_regs * regs)
 	/* Stash our initial stack pointer into the mm structure */
 	current->mm->start_stack = (unsigned long )sp;
 
-	
+#ifdef FLAT_PLAT_INIT
+	FLAT_PLAT_INIT(regs);
+#endif
 	DBG_FLT("start_thread(regs=0x%x, entry=0x%x, start_stack=0x%x)\n",
 		(int)regs, (int)start_addr, (int)current->mm->start_stack);
 	
 	start_thread(regs, start_addr, current->mm->start_stack);
 
-	if (current->ptrace & PT_PTRACED)
-		send_sig(SIGTRAP, current, 0);
-
 	return 0;
 }
 
diff --git a/fs/binfmt_misc.c b/fs/binfmt_misc.c
index 756205314c24..8d7e88e02e0f 100644
--- a/fs/binfmt_misc.c
+++ b/fs/binfmt_misc.c
@@ -120,8 +120,6 @@ static int load_misc_binary(struct linux_binprm *bprm, struct pt_regs *regs)
 	if (bprm->misc_bang)
 		goto _ret;
 
-	bprm->misc_bang = 1;
-
 	/* to keep locking time low, we copy the interpreter string */
 	read_lock(&entries_lock);
 	fmt = check_file(bprm);
@@ -199,6 +197,8 @@ static int load_misc_binary(struct linux_binprm *bprm, struct pt_regs *regs)
 	if (retval < 0)
 		goto _error;
 
+	bprm->misc_bang = 1;
+
 	retval = search_binary_handler (bprm, regs);
 	if (retval < 0)
 		goto _error;
diff --git a/fs/binfmt_som.c b/fs/binfmt_som.c
index fdc36bfd6a7b..68be580ba289 100644
--- a/fs/binfmt_som.c
+++ b/fs/binfmt_som.c
@@ -274,8 +274,6 @@ load_som_binary(struct linux_binprm * bprm, struct pt_regs * regs)
 	map_hpux_gateway_page(current,current->mm);
 
 	start_thread_som(regs, som_entry, bprm->p);
-	if (current->ptrace & PT_PTRACED)
-		send_sig(SIGTRAP, current, 0);
 	return 0;
 
 	/* error cleanup */
diff --git a/fs/bio-integrity.c b/fs/bio-integrity.c
index 63e2ee63058d..c3e174b35fe6 100644
--- a/fs/bio-integrity.c
+++ b/fs/bio-integrity.c
@@ -705,7 +705,6 @@ void __init bio_integrity_init_slab(void)
 	bio_integrity_slab = KMEM_CACHE(bio_integrity_payload,
 					SLAB_HWCACHE_ALIGN|SLAB_PANIC);
 }
-EXPORT_SYMBOL(bio_integrity_init_slab);
 
 static int __init integrity_init(void)
 {
diff --git a/fs/bio.c b/fs/bio.c
index 88322b066acb..3cba7ae34d75 100644
--- a/fs/bio.c
+++ b/fs/bio.c
@@ -77,11 +77,8 @@ struct bio_vec *bvec_alloc_bs(gfp_t gfp_mask, int nr, unsigned long *idx, struct
 	 */
 
 	bvl = mempool_alloc(bs->bvec_pools[*idx], gfp_mask);
-	if (bvl) {
-		struct biovec_slab *bp = bvec_slabs + *idx;
-
-		memset(bvl, 0, bp->nr_vecs * sizeof(struct bio_vec));
-	}
+	if (bvl)
+		memset(bvl, 0, bvec_nr_vecs(*idx) * sizeof(struct bio_vec));
 
 	return bvl;
 }
@@ -149,7 +146,7 @@ struct bio *bio_alloc_bioset(gfp_t gfp_mask, int nr_iovecs, struct bio_set *bs)
 				goto out;
 			}
 			bio->bi_flags |= idx << BIO_POOL_OFFSET;
-			bio->bi_max_vecs = bvec_slabs[idx].nr_vecs;
+			bio->bi_max_vecs = bvec_nr_vecs(idx);
 		}
 		bio->bi_io_vec = bvl;
 	}
@@ -472,20 +469,21 @@ static void bio_free_map_data(struct bio_map_data *bmd)
 	kfree(bmd);
 }
 
-static struct bio_map_data *bio_alloc_map_data(int nr_segs, int iov_count)
+static struct bio_map_data *bio_alloc_map_data(int nr_segs, int iov_count,
+					       gfp_t gfp_mask)
 {
-	struct bio_map_data *bmd = kmalloc(sizeof(*bmd), GFP_KERNEL);
+	struct bio_map_data *bmd = kmalloc(sizeof(*bmd), gfp_mask);
 
 	if (!bmd)
 		return NULL;
 
-	bmd->iovecs = kmalloc(sizeof(struct bio_vec) * nr_segs, GFP_KERNEL);
+	bmd->iovecs = kmalloc(sizeof(struct bio_vec) * nr_segs, gfp_mask);
 	if (!bmd->iovecs) {
 		kfree(bmd);
 		return NULL;
 	}
 
-	bmd->sgvecs = kmalloc(sizeof(struct sg_iovec) * iov_count, GFP_KERNEL);
+	bmd->sgvecs = kmalloc(sizeof(struct sg_iovec) * iov_count, gfp_mask);
 	if (bmd->sgvecs)
 		return bmd;
 
@@ -494,8 +492,8 @@ static struct bio_map_data *bio_alloc_map_data(int nr_segs, int iov_count)
 	return NULL;
 }
 
-static int __bio_copy_iov(struct bio *bio, struct sg_iovec *iov, int iov_count,
-			  int uncopy)
+static int __bio_copy_iov(struct bio *bio, struct bio_vec *iovecs,
+			  struct sg_iovec *iov, int iov_count, int uncopy)
 {
 	int ret = 0, i;
 	struct bio_vec *bvec;
@@ -505,7 +503,7 @@ static int __bio_copy_iov(struct bio *bio, struct sg_iovec *iov, int iov_count,
 
 	__bio_for_each_segment(bvec, bio, i, 0) {
 		char *bv_addr = page_address(bvec->bv_page);
-		unsigned int bv_len = bvec->bv_len;
+		unsigned int bv_len = iovecs[i].bv_len;
 
 		while (bv_len && iov_idx < iov_count) {
 			unsigned int bytes;
@@ -557,7 +555,7 @@ int bio_uncopy_user(struct bio *bio)
 	struct bio_map_data *bmd = bio->bi_private;
 	int ret;
 
-	ret = __bio_copy_iov(bio, bmd->sgvecs, bmd->nr_sgvecs, 1);
+	ret = __bio_copy_iov(bio, bmd->iovecs, bmd->sgvecs, bmd->nr_sgvecs, 1);
 
 	bio_free_map_data(bmd);
 	bio_put(bio);
@@ -599,7 +597,7 @@ struct bio *bio_copy_user_iov(struct request_queue *q, struct sg_iovec *iov,
 		len += iov[i].iov_len;
 	}
 
-	bmd = bio_alloc_map_data(nr_pages, iov_count);
+	bmd = bio_alloc_map_data(nr_pages, iov_count, GFP_KERNEL);
 	if (!bmd)
 		return ERR_PTR(-ENOMEM);
 
@@ -636,7 +634,7 @@ struct bio *bio_copy_user_iov(struct request_queue *q, struct sg_iovec *iov,
 	 * success
 	 */
 	if (!write_to_vm) {
-		ret = __bio_copy_iov(bio, iov, iov_count, 0);
+		ret = __bio_copy_iov(bio, bio->bi_io_vec, iov, iov_count, 0);
 		if (ret)
 			goto cleanup;
 	}
@@ -721,12 +719,8 @@ static struct bio *__bio_map_user_iov(struct request_queue *q,
 		const int local_nr_pages = end - start;
 		const int page_limit = cur_page + local_nr_pages;
 		
-		down_read(&current->mm->mmap_sem);
-		ret = get_user_pages(current, current->mm, uaddr,
-				     local_nr_pages,
-				     write_to_vm, 0, &pages[cur_page], NULL);
-		up_read(&current->mm->mmap_sem);
-
+		ret = get_user_pages_fast(uaddr, local_nr_pages,
+				write_to_vm, &pages[cur_page]);
 		if (ret < local_nr_pages) {
 			ret = -EFAULT;
 			goto out_unmap;
@@ -949,19 +943,22 @@ static void bio_copy_kern_endio(struct bio *bio, int err)
 {
 	struct bio_vec *bvec;
 	const int read = bio_data_dir(bio) == READ;
-	char *p = bio->bi_private;
+	struct bio_map_data *bmd = bio->bi_private;
 	int i;
+	char *p = bmd->sgvecs[0].iov_base;
 
 	__bio_for_each_segment(bvec, bio, i, 0) {
 		char *addr = page_address(bvec->bv_page);
+		int len = bmd->iovecs[i].bv_len;
 
 		if (read && !err)
-			memcpy(p, addr, bvec->bv_len);
+			memcpy(p, addr, len);
 
 		__free_page(bvec->bv_page);
-		p += bvec->bv_len;
+		p += len;
 	}
 
+	bio_free_map_data(bmd);
 	bio_put(bio);
 }
 
@@ -985,11 +982,21 @@ struct bio *bio_copy_kern(struct request_queue *q, void *data, unsigned int len,
 	const int nr_pages = end - start;
 	struct bio *bio;
 	struct bio_vec *bvec;
+	struct bio_map_data *bmd;
 	int i, ret;
+	struct sg_iovec iov;
 
+	iov.iov_base = data;
+	iov.iov_len = len;
+
+	bmd = bio_alloc_map_data(nr_pages, 1, gfp_mask);
+	if (!bmd)
+		return ERR_PTR(-ENOMEM);
+
+	ret = -ENOMEM;
 	bio = bio_alloc(gfp_mask, nr_pages);
 	if (!bio)
-		return ERR_PTR(-ENOMEM);
+		goto out_bmd;
 
 	while (len) {
 		struct page *page;
@@ -1023,14 +1030,18 @@ struct bio *bio_copy_kern(struct request_queue *q, void *data, unsigned int len,
 		}
 	}
 
-	bio->bi_private = data;
+	bio->bi_private = bmd;
 	bio->bi_end_io = bio_copy_kern_endio;
+
+	bio_set_map_data(bmd, bio, &iov, 1);
 	return bio;
 cleanup:
 	bio_for_each_segment(bvec, bio, i)
 		__free_page(bvec->bv_page);
 
 	bio_put(bio);
+out_bmd:
+	bio_free_map_data(bmd);
 
 	return ERR_PTR(ret);
 }
diff --git a/fs/block_dev.c b/fs/block_dev.c
index 10d8a0aa871a..aff54219e049 100644
--- a/fs/block_dev.c
+++ b/fs/block_dev.c
@@ -271,7 +271,7 @@ static void bdev_destroy_inode(struct inode *inode)
 	kmem_cache_free(bdev_cachep, bdi);
 }
 
-static void init_once(struct kmem_cache * cachep, void *foo)
+static void init_once(void *foo)
 {
 	struct bdev_inode *ei = (struct bdev_inode *) foo;
 	struct block_device *bdev = &ei->bdev;
@@ -941,8 +941,10 @@ static int do_open(struct block_device *bdev, struct file *file, int for_part)
 	 * hooks: /n/, see "layering violations".
 	 */
 	ret = devcgroup_inode_permission(bdev->bd_inode, perm);
-	if (ret != 0)
+	if (ret != 0) {
+		bdput(bdev);
 		return ret;
+	}
 
 	ret = -ENXIO;
 	file->f_mapping = bdev->bd_inode->i_mapping;
@@ -1234,6 +1236,7 @@ fail:
 	bdev = ERR_PTR(error);
 	goto out;
 }
+EXPORT_SYMBOL(lookup_bdev);
 
 /**
  * open_bdev_excl  -  open a block device by name and set it up for use
diff --git a/fs/buffer.c b/fs/buffer.c
index d48caee12e2a..ac78d4c19b3b 100644
--- a/fs/buffer.c
+++ b/fs/buffer.c
@@ -580,7 +580,7 @@ EXPORT_SYMBOL(mark_buffer_async_write);
 /*
  * The buffer's backing address_space's private_lock must be held
  */
-static inline void __remove_assoc_queue(struct buffer_head *bh)
+static void __remove_assoc_queue(struct buffer_head *bh)
 {
 	list_del_init(&bh->b_assoc_buffers);
 	WARN_ON(!bh->b_assoc_map);
@@ -706,7 +706,7 @@ static int __set_page_dirty(struct page *page,
 	if (TestSetPageDirty(page))
 		return 0;
 
-	write_lock_irq(&mapping->tree_lock);
+	spin_lock_irq(&mapping->tree_lock);
 	if (page->mapping) {	/* Race with truncate? */
 		WARN_ON_ONCE(warn && !PageUptodate(page));
 
@@ -719,7 +719,7 @@ static int __set_page_dirty(struct page *page,
 		radix_tree_tag_set(&mapping->page_tree,
 				page_index(page), PAGECACHE_TAG_DIRTY);
 	}
-	write_unlock_irq(&mapping->tree_lock);
+	spin_unlock_irq(&mapping->tree_lock);
 	__mark_inode_dirty(mapping->host, I_DIRTY_PAGES);
 
 	return 1;
@@ -1214,8 +1214,7 @@ void __brelse(struct buffer_head * buf)
 		put_bh(buf);
 		return;
 	}
-	printk(KERN_ERR "VFS: brelse: Trying to free free buffer\n");
-	WARN_ON(1);
+	WARN(1, KERN_ERR "VFS: brelse: Trying to free free buffer\n");
 }
 
 /*
@@ -1721,7 +1720,7 @@ static int __block_write_full_page(struct inode *inode, struct page *page,
 		 */
 		if (wbc->sync_mode != WB_SYNC_NONE || !wbc->nonblocking) {
 			lock_buffer(bh);
-		} else if (test_set_buffer_locked(bh)) {
+		} else if (!trylock_buffer(bh)) {
 			redirty_page_for_writepage(wbc, page);
 			continue;
 		}
@@ -2097,6 +2096,52 @@ int generic_write_end(struct file *file, struct address_space *mapping,
 EXPORT_SYMBOL(generic_write_end);
 
 /*
+ * block_is_partially_uptodate checks whether buffers within a page are
+ * uptodate or not.
+ *
+ * Returns true if all buffers which correspond to a file portion
+ * we want to read are uptodate.
+ */
+int block_is_partially_uptodate(struct page *page, read_descriptor_t *desc,
+					unsigned long from)
+{
+	struct inode *inode = page->mapping->host;
+	unsigned block_start, block_end, blocksize;
+	unsigned to;
+	struct buffer_head *bh, *head;
+	int ret = 1;
+
+	if (!page_has_buffers(page))
+		return 0;
+
+	blocksize = 1 << inode->i_blkbits;
+	to = min_t(unsigned, PAGE_CACHE_SIZE - from, desc->count);
+	to = from + to;
+	if (from < blocksize && to > PAGE_CACHE_SIZE - blocksize)
+		return 0;
+
+	head = page_buffers(page);
+	bh = head;
+	block_start = 0;
+	do {
+		block_end = block_start + blocksize;
+		if (block_end > from && block_start < to) {
+			if (!buffer_uptodate(bh)) {
+				ret = 0;
+				break;
+			}
+			if (block_end >= to)
+				break;
+		}
+		block_start = block_end;
+		bh = bh->b_this_page;
+	} while (bh != head);
+
+	return ret;
+}
+EXPORT_SYMBOL(block_is_partially_uptodate);
+
+/*
  * Generic "read page" function for block devices that have the normal
  * get_block functionality. This is most of the block device filesystems.
  * Reads the page asynchronously --- the unlock_buffer() and
@@ -2881,14 +2926,17 @@ int submit_bh(int rw, struct buffer_head * bh)
 	BUG_ON(!buffer_mapped(bh));
 	BUG_ON(!bh->b_end_io);
 
-	if (buffer_ordered(bh) && (rw == WRITE))
-		rw = WRITE_BARRIER;
+	/*
+	 * Mask in barrier bit for a write (could be either a WRITE or a
+	 * WRITE_SYNC
+	 */
+	if (buffer_ordered(bh) && (rw & WRITE))
+		rw |= WRITE_BARRIER;
 
 	/*
-	 * Only clear out a write error when rewriting, should this
-	 * include WRITE_SYNC as well?
+	 * Only clear out a write error when rewriting
 	 */
-	if (test_set_buffer_req(bh) && (rw == WRITE || rw == WRITE_BARRIER))
+	if (test_set_buffer_req(bh) && (rw & WRITE))
 		clear_buffer_write_io_error(bh);
 
 	/*
@@ -2955,7 +3003,7 @@ void ll_rw_block(int rw, int nr, struct buffer_head *bhs[])
 
 		if (rw == SWRITE || rw == SWRITE_SYNC)
 			lock_buffer(bh);
-		else if (test_set_buffer_locked(bh))
+		else if (!trylock_buffer(bh))
 			continue;
 
 		if (rw == WRITE || rw == SWRITE || rw == SWRITE_SYNC) {
@@ -3272,7 +3320,7 @@ int bh_submit_read(struct buffer_head *bh)
 EXPORT_SYMBOL(bh_submit_read);
 
 static void
-init_buffer_head(struct kmem_cache *cachep, void *data)
+init_buffer_head(void *data)
 {
 	struct buffer_head *bh = data;
 
diff --git a/fs/cifs/CHANGES b/fs/cifs/CHANGES
index 1f3465201fdf..06e521a945c3 100644
--- a/fs/cifs/CHANGES
+++ b/fs/cifs/CHANGES
@@ -1,3 +1,19 @@
+Version 1.54
+------------
+Fix premature write failure on congested networks (we would give up
+on EAGAIN from the socket too quickly on large writes).
+Cifs_mkdir and cifs_create now respect the setgid bit on parent dir.
+Fix endian problems in acl (mode from/to cifs acl) on bigendian
+architectures.  Fix problems with preserving timestamps on copying open
+files (e.g. "cp -a") to Windows servers.  For mkdir and create honor setgid bit
+on parent directory when server supports Unix Extensions but not POSIX
+create. Update cifs.upcall version to handle new Kerberos sec flags
+(this requires update of cifs.upcall program from Samba).  Fix memory leak
+on dns_upcall (resolving DFS referralls).  Fix plain text password
+authentication (requires setting SecurityFlags to 0x30030 to enable
+lanman and plain text though).  Fix writes to be at correct offset when
+file is open with O_APPEND and file is on a directio (forcediretio) mount.
+
 Version 1.53
 ------------
 DFS support added (Microsoft Distributed File System client support needed
diff --git a/fs/cifs/README b/fs/cifs/README
index 2bd6fe556f88..bd2343d4c6a6 100644
--- a/fs/cifs/README
+++ b/fs/cifs/README
@@ -542,10 +542,20 @@ SecurityFlags		Flags which control security negotiation and
 			hashing mechanisms (as "must use") on the other hand 
 			does not make much sense. Default flags are 
 				0x07007 
-			(NTLM, NTLMv2 and packet signing allowed).  Maximum 
+			(NTLM, NTLMv2 and packet signing allowed).  The maximum 
 			allowable flags if you want to allow mounts to servers
 			using weaker password hashes is 0x37037 (lanman,
-			plaintext, ntlm, ntlmv2, signing allowed):
+			plaintext, ntlm, ntlmv2, signing allowed).  Some
+			SecurityFlags require the corresponding menuconfig
+			options to be enabled (lanman and plaintext require
+			CONFIG_CIFS_WEAK_PW_HASH for example).  Enabling
+			plaintext authentication currently requires also
+			enabling lanman authentication in the security flags
+			because the cifs module only supports sending
+			laintext passwords using the older lanman dialect
+			form of the session setup SMB.  (e.g. for authentication
+			using plain text passwords, set the SecurityFlags
+			to 0x30030):
  
 			may use packet signing 				0x00001
 			must use packet signing				0x01001
@@ -642,8 +652,30 @@ The statistics for the number of total SMBs and oplock breaks are different in
 that they represent all for that share, not just those for which the server
 returned success.
 	
-Also note that "cat /proc/fs/cifs/DebugData" will display information about 
+Also note that "cat /proc/fs/cifs/DebugData" will display information about
 the active sessions and the shares that are mounted.
-Enabling Kerberos (extended security) works when CONFIG_CIFS_EXPERIMENTAL is
-on but requires a user space helper (from the Samba project). NTLM and NTLMv2 and
-LANMAN support do not require this helper.
+
+Enabling Kerberos (extended security) works but requires version 1.2 or later
+of the helper program cifs.upcall to be present and to be configured in the
+/etc/request-key.conf file.  The cifs.upcall helper program is from the Samba
+project(http://www.samba.org). NTLM and NTLMv2 and LANMAN support do not
+require this helper. Note that NTLMv2 security (which does not require the
+cifs.upcall helper program), instead of using Kerberos, is sufficient for
+some use cases.
+
+Enabling DFS support (used to access shares transparently in an MS-DFS
+global name space) requires that CONFIG_CIFS_EXPERIMENTAL be enabled.  In
+addition, DFS support for target shares which are specified as UNC
+names which begin with host names (rather than IP addresses) requires
+a user space helper (such as cifs.upcall) to be present in order to
+translate host names to ip address, and the user space helper must also
+be configured in the file /etc/request-key.conf
+
+To use cifs Kerberos and DFS support, the Linux keyutils package should be
+installed and something like the following lines should be added to the
+/etc/request-key.conf file:
+
+create cifs.spnego * * /usr/local/sbin/cifs.upcall %k
+create dns_resolver * * /usr/local/sbin/cifs.upcall %k
+
+
diff --git a/fs/cifs/asn1.c b/fs/cifs/asn1.c
index f58e41d3ba48..1b09f1670061 100644
--- a/fs/cifs/asn1.c
+++ b/fs/cifs/asn1.c
@@ -400,7 +400,7 @@ asn1_oid_decode(struct asn1_ctx *ctx,
 	size = eoc - ctx->pointer + 1;
 
 	/* first subid actually encodes first two subids */
-	if (size < 2 || size > ULONG_MAX/sizeof(unsigned long))
+	if (size < 2 || size > UINT_MAX/sizeof(unsigned long))
 		return 0;
 
 	*oid = kmalloc(size * sizeof(unsigned long), GFP_ATOMIC);
@@ -476,6 +476,7 @@ decode_negTokenInit(unsigned char *security_blob, int length,
 	unsigned int cls, con, tag, oidlen, rc;
 	bool use_ntlmssp = false;
 	bool use_kerberos = false;
+	bool use_mskerberos = false;
 
 	*secType = NTLM; /* BB eventually make Kerberos or NLTMSSP the default*/
 
@@ -483,6 +484,7 @@ decode_negTokenInit(unsigned char *security_blob, int length,
 
 	asn1_open(&ctx, security_blob, length);
 
+	/* GSSAPI header */
 	if (asn1_header_decode(&ctx, &end, &cls, &con, &tag) == 0) {
 		cFYI(1, ("Error decoding negTokenInit header"));
 		return 0;
@@ -490,156 +492,149 @@ decode_negTokenInit(unsigned char *security_blob, int length,
 		   || (tag != ASN1_EOC)) {
 		cFYI(1, ("cls = %d con = %d tag = %d", cls, con, tag));
 		return 0;
-	} else {
-		/*      remember to free obj->oid */
-		rc = asn1_header_decode(&ctx, &end, &cls, &con, &tag);
-		if (rc) {
-			if ((tag == ASN1_OJI) && (cls == ASN1_PRI)) {
-				rc = asn1_oid_decode(&ctx, end, &oid, &oidlen);
-				if (rc) {
-					rc = compare_oid(oid, oidlen,
-							 SPNEGO_OID,
-							 SPNEGO_OID_LEN);
-					kfree(oid);
-				}
-			} else
-				rc = 0;
-		}
+	}
 
-		if (!rc) {
-			cFYI(1, ("Error decoding negTokenInit header"));
-			return 0;
-		}
+	/* Check for SPNEGO OID -- remember to free obj->oid */
+	rc = asn1_header_decode(&ctx, &end, &cls, &con, &tag);
+	if (rc) {
+		if ((tag == ASN1_OJI) && (con == ASN1_PRI) &&
+		    (cls == ASN1_UNI)) {
+			rc = asn1_oid_decode(&ctx, end, &oid, &oidlen);
+			if (rc) {
+				rc = compare_oid(oid, oidlen, SPNEGO_OID,
+						 SPNEGO_OID_LEN);
+				kfree(oid);
+			}
+		} else
+			rc = 0;
+	}
 
-		if (asn1_header_decode(&ctx, &end, &cls, &con, &tag) == 0) {
-			cFYI(1, ("Error decoding negTokenInit"));
-			return 0;
-		} else if ((cls != ASN1_CTX) || (con != ASN1_CON)
-			   || (tag != ASN1_EOC)) {
-			cFYI(1,
-			     ("cls = %d con = %d tag = %d end = %p (%d) exit 0",
-			      cls, con, tag, end, *end));
-			return 0;
-		}
+	/* SPNEGO OID not present or garbled -- bail out */
+	if (!rc) {
+		cFYI(1, ("Error decoding negTokenInit header"));
+		return 0;
+	}
 
-		if (asn1_header_decode(&ctx, &end, &cls, &con, &tag) == 0) {
-			cFYI(1, ("Error decoding negTokenInit"));
-			return 0;
-		} else if ((cls != ASN1_UNI) || (con != ASN1_CON)
-			   || (tag != ASN1_SEQ)) {
-			cFYI(1,
-			     ("cls = %d con = %d tag = %d end = %p (%d) exit 1",
-			      cls, con, tag, end, *end));
-			return 0;
-		}
+	if (asn1_header_decode(&ctx, &end, &cls, &con, &tag) == 0) {
+		cFYI(1, ("Error decoding negTokenInit"));
+		return 0;
+	} else if ((cls != ASN1_CTX) || (con != ASN1_CON)
+		   || (tag != ASN1_EOC)) {
+		cFYI(1,
+		     ("cls = %d con = %d tag = %d end = %p (%d) exit 0",
+		      cls, con, tag, end, *end));
+		return 0;
+	}
 
-		if (asn1_header_decode(&ctx, &end, &cls, &con, &tag) == 0) {
-			cFYI(1, ("Error decoding 2nd part of negTokenInit"));
-			return 0;
-		} else if ((cls != ASN1_CTX) || (con != ASN1_CON)
-			   || (tag != ASN1_EOC)) {
-			cFYI(1,
-			     ("cls = %d con = %d tag = %d end = %p (%d) exit 0",
-			      cls, con, tag, end, *end));
-			return 0;
-		}
+	if (asn1_header_decode(&ctx, &end, &cls, &con, &tag) == 0) {
+		cFYI(1, ("Error decoding negTokenInit"));
+		return 0;
+	} else if ((cls != ASN1_UNI) || (con != ASN1_CON)
+		   || (tag != ASN1_SEQ)) {
+		cFYI(1,
+		     ("cls = %d con = %d tag = %d end = %p (%d) exit 1",
+		      cls, con, tag, end, *end));
+		return 0;
+	}
 
-		if (asn1_header_decode
-		    (&ctx, &sequence_end, &cls, &con, &tag) == 0) {
-			cFYI(1, ("Error decoding 2nd part of negTokenInit"));
-			return 0;
-		} else if ((cls != ASN1_UNI) || (con != ASN1_CON)
-			   || (tag != ASN1_SEQ)) {
-			cFYI(1,
-			     ("cls = %d con = %d tag = %d end = %p (%d) exit 1",
-			      cls, con, tag, end, *end));
-			return 0;
-		}
+	if (asn1_header_decode(&ctx, &end, &cls, &con, &tag) == 0) {
+		cFYI(1, ("Error decoding 2nd part of negTokenInit"));
+		return 0;
+	} else if ((cls != ASN1_CTX) || (con != ASN1_CON)
+		   || (tag != ASN1_EOC)) {
+		cFYI(1,
+		     ("cls = %d con = %d tag = %d end = %p (%d) exit 0",
+		      cls, con, tag, end, *end));
+		return 0;
+	}
 
-		while (!asn1_eoc_decode(&ctx, sequence_end)) {
-			rc = asn1_header_decode(&ctx, &end, &cls, &con, &tag);
-			if (!rc) {
-				cFYI(1,
-				     ("Error decoding negTokenInit hdr exit2"));
-				return 0;
-			}
-			if ((tag == ASN1_OJI) && (con == ASN1_PRI)) {
-				if (asn1_oid_decode(&ctx, end, &oid, &oidlen)) {
-
-					cFYI(1,
-					  ("OID len = %d oid = 0x%lx 0x%lx "
-					   "0x%lx 0x%lx",
-					   oidlen, *oid, *(oid + 1),
-					   *(oid + 2), *(oid + 3)));
-
-					if (compare_oid(oid, oidlen,
-							MSKRB5_OID,
-							MSKRB5_OID_LEN))
-						use_kerberos = true;
-					else if (compare_oid(oid, oidlen,
-							     KRB5_OID,
-							     KRB5_OID_LEN))
-						use_kerberos = true;
-					else if (compare_oid(oid, oidlen,
-							     NTLMSSP_OID,
-							     NTLMSSP_OID_LEN))
-						use_ntlmssp = true;
-
-					kfree(oid);
-				}
-			} else {
-				cFYI(1, ("Should be an oid what is going on?"));
-			}
-		}
+	if (asn1_header_decode
+	    (&ctx, &sequence_end, &cls, &con, &tag) == 0) {
+		cFYI(1, ("Error decoding 2nd part of negTokenInit"));
+		return 0;
+	} else if ((cls != ASN1_UNI) || (con != ASN1_CON)
+		   || (tag != ASN1_SEQ)) {
+		cFYI(1,
+		     ("cls = %d con = %d tag = %d end = %p (%d) exit 1",
+		      cls, con, tag, end, *end));
+		return 0;
+	}
 
-		if (asn1_header_decode(&ctx, &end, &cls, &con, &tag) == 0) {
-			cFYI(1,
-			     ("Error decoding last part negTokenInit exit3"));
-			return 0;
-		} else if ((cls != ASN1_CTX) || (con != ASN1_CON)) {
-			/* tag = 3 indicating mechListMIC */
+	while (!asn1_eoc_decode(&ctx, sequence_end)) {
+		rc = asn1_header_decode(&ctx, &end, &cls, &con, &tag);
+		if (!rc) {
 			cFYI(1,
-			     ("Exit 4 cls = %d con = %d tag = %d end = %p (%d)",
-			      cls, con, tag, end, *end));
+			     ("Error decoding negTokenInit hdr exit2"));
 			return 0;
 		}
-		if (asn1_header_decode(&ctx, &end, &cls, &con, &tag) == 0) {
-			cFYI(1,
-			     ("Error decoding last part negTokenInit exit5"));
-			return 0;
-		} else if ((cls != ASN1_UNI) || (con != ASN1_CON)
-			   || (tag != ASN1_SEQ)) {
-			cFYI(1, ("cls = %d con = %d tag = %d end = %p (%d)",
-				cls, con, tag, end, *end));
+		if ((tag == ASN1_OJI) && (con == ASN1_PRI)) {
+			if (asn1_oid_decode(&ctx, end, &oid, &oidlen)) {
+
+				cFYI(1, ("OID len = %d oid = 0x%lx 0x%lx "
+					 "0x%lx 0x%lx", oidlen, *oid,
+					 *(oid + 1), *(oid + 2), *(oid + 3)));
+
+				if (compare_oid(oid, oidlen, MSKRB5_OID,
+						MSKRB5_OID_LEN) &&
+						!use_kerberos)
+					use_mskerberos = true;
+				else if (compare_oid(oid, oidlen, KRB5_OID,
+						     KRB5_OID_LEN) &&
+						     !use_mskerberos)
+					use_kerberos = true;
+				else if (compare_oid(oid, oidlen, NTLMSSP_OID,
+						     NTLMSSP_OID_LEN))
+					use_ntlmssp = true;
+
+				kfree(oid);
+			}
+		} else {
+			cFYI(1, ("Should be an oid what is going on?"));
 		}
+	}
 
-		if (asn1_header_decode(&ctx, &end, &cls, &con, &tag) == 0) {
-			cFYI(1,
-			     ("Error decoding last part negTokenInit exit 7"));
-			return 0;
-		} else if ((cls != ASN1_CTX) || (con != ASN1_CON)) {
-			cFYI(1,
-			     ("Exit 8 cls = %d con = %d tag = %d end = %p (%d)",
-			      cls, con, tag, end, *end));
-			return 0;
-		}
-		if (asn1_header_decode(&ctx, &end, &cls, &con, &tag) == 0) {
-			cFYI(1,
-			     ("Error decoding last part negTokenInit exit9"));
-			return 0;
-		} else if ((cls != ASN1_UNI) || (con != ASN1_PRI)
-			   || (tag != ASN1_GENSTR)) {
-			cFYI(1,
-			     ("Exit10 cls = %d con = %d tag = %d end = %p (%d)",
-			      cls, con, tag, end, *end));
-			return 0;
-		}
-		cFYI(1, ("Need to call asn1_octets_decode() function for %s",
-			 ctx.pointer));	/* is this UTF-8 or ASCII? */
+	if (asn1_header_decode(&ctx, &end, &cls, &con, &tag) == 0) {
+		cFYI(1, ("Error decoding last part negTokenInit exit3"));
+		return 0;
+	} else if ((cls != ASN1_CTX) || (con != ASN1_CON)) {
+		/* tag = 3 indicating mechListMIC */
+		cFYI(1, ("Exit 4 cls = %d con = %d tag = %d end = %p (%d)",
+			 cls, con, tag, end, *end));
+		return 0;
+	}
+	if (asn1_header_decode(&ctx, &end, &cls, &con, &tag) == 0) {
+		cFYI(1, ("Error decoding last part negTokenInit exit5"));
+		return 0;
+	} else if ((cls != ASN1_UNI) || (con != ASN1_CON)
+		   || (tag != ASN1_SEQ)) {
+		cFYI(1, ("cls = %d con = %d tag = %d end = %p (%d)",
+			cls, con, tag, end, *end));
+	}
+
+	if (asn1_header_decode(&ctx, &end, &cls, &con, &tag) == 0) {
+		cFYI(1, ("Error decoding last part negTokenInit exit 7"));
+		return 0;
+	} else if ((cls != ASN1_CTX) || (con != ASN1_CON)) {
+		cFYI(1, ("Exit 8 cls = %d con = %d tag = %d end = %p (%d)",
+			 cls, con, tag, end, *end));
+		return 0;
+	}
+	if (asn1_header_decode(&ctx, &end, &cls, &con, &tag) == 0) {
+		cFYI(1, ("Error decoding last part negTokenInit exit9"));
+		return 0;
+	} else if ((cls != ASN1_UNI) || (con != ASN1_PRI)
+		   || (tag != ASN1_GENSTR)) {
+		cFYI(1, ("Exit10 cls = %d con = %d tag = %d end = %p (%d)",
+			 cls, con, tag, end, *end));
+		return 0;
 	}
+	cFYI(1, ("Need to call asn1_octets_decode() function for %s",
+		 ctx.pointer));	/* is this UTF-8 or ASCII? */
 
 	if (use_kerberos)
 		*secType = Kerberos;
+	else if (use_mskerberos)
+		*secType = MSKerberos;
 	else if (use_ntlmssp)
 		*secType = NTLMSSP;
 
diff --git a/fs/cifs/cifs_debug.c b/fs/cifs/cifs_debug.c
index cc950f69e51e..69a12aae91d3 100644
--- a/fs/cifs/cifs_debug.c
+++ b/fs/cifs/cifs_debug.c
@@ -79,27 +79,25 @@ void cifs_dump_mids(struct TCP_Server_Info *server)
 	spin_lock(&GlobalMid_Lock);
 	list_for_each(tmp, &server->pending_mid_q) {
 		mid_entry = list_entry(tmp, struct mid_q_entry, qhead);
-		if (mid_entry) {
-			cERROR(1, ("State: %d Cmd: %d Pid: %d Tsk: %p Mid %d",
-				mid_entry->midState,
-				(int)mid_entry->command,
-				mid_entry->pid,
-				mid_entry->tsk,
-				mid_entry->mid));
+		cERROR(1, ("State: %d Cmd: %d Pid: %d Tsk: %p Mid %d",
+			mid_entry->midState,
+			(int)mid_entry->command,
+			mid_entry->pid,
+			mid_entry->tsk,
+			mid_entry->mid));
 #ifdef CONFIG_CIFS_STATS2
-			cERROR(1, ("IsLarge: %d buf: %p time rcv: %ld now: %ld",
-				mid_entry->largeBuf,
-				mid_entry->resp_buf,
-				mid_entry->when_received,
-				jiffies));
+		cERROR(1, ("IsLarge: %d buf: %p time rcv: %ld now: %ld",
+			mid_entry->largeBuf,
+			mid_entry->resp_buf,
+			mid_entry->when_received,
+			jiffies));
 #endif /* STATS2 */
-			cERROR(1, ("IsMult: %d IsEnd: %d", mid_entry->multiRsp,
-				  mid_entry->multiEnd));
-			if (mid_entry->resp_buf) {
-				cifs_dump_detail(mid_entry->resp_buf);
-				cifs_dump_mem("existing buf: ",
-					mid_entry->resp_buf, 62);
-			}
+		cERROR(1, ("IsMult: %d IsEnd: %d", mid_entry->multiRsp,
+			  mid_entry->multiEnd));
+		if (mid_entry->resp_buf) {
+			cifs_dump_detail(mid_entry->resp_buf);
+			cifs_dump_mem("existing buf: ",
+				mid_entry->resp_buf, 62);
 		}
 	}
 	spin_unlock(&GlobalMid_Lock);
@@ -107,9 +105,7 @@ void cifs_dump_mids(struct TCP_Server_Info *server)
 #endif /* CONFIG_CIFS_DEBUG2 */
 
 #ifdef CONFIG_PROC_FS
-static int
-cifs_debug_data_read(char *buf, char **beginBuffer, off_t offset,
-		     int count, int *eof, void *data)
+static int cifs_debug_data_proc_show(struct seq_file *m, void *v)
 {
 	struct list_head *tmp;
 	struct list_head *tmp1;
@@ -117,23 +113,13 @@ cifs_debug_data_read(char *buf, char **beginBuffer, off_t offset,
 	struct cifsSesInfo *ses;
 	struct cifsTconInfo *tcon;
 	int i;
-	int length = 0;
-	char *original_buf = buf;
-
-	*beginBuffer = buf + offset;
 
-	length =
-	    sprintf(buf,
+	seq_puts(m,
 		    "Display Internal CIFS Data Structures for Debugging\n"
 		    "---------------------------------------------------\n");
-	buf += length;
-	length = sprintf(buf, "CIFS Version %s\n", CIFS_VERSION);
-	buf += length;
-	length = sprintf(buf,
-		"Active VFS Requests: %d\n", GlobalTotalActiveXid);
-	buf += length;
-	length = sprintf(buf, "Servers:");
-	buf += length;
+	seq_printf(m, "CIFS Version %s\n", CIFS_VERSION);
+	seq_printf(m, "Active VFS Requests: %d\n", GlobalTotalActiveXid);
+	seq_printf(m, "Servers:");
 
 	i = 0;
 	read_lock(&GlobalSMBSeslock);
@@ -142,11 +128,10 @@ cifs_debug_data_read(char *buf, char **beginBuffer, off_t offset,
 		ses = list_entry(tmp, struct cifsSesInfo, cifsSessionList);
 		if ((ses->serverDomain == NULL) || (ses->serverOS == NULL) ||
 		   (ses->serverNOS == NULL)) {
-			buf += sprintf(buf, "\nentry for %s not fully "
+			seq_printf(m, "\nentry for %s not fully "
 					"displayed\n\t", ses->serverName);
 		} else {
-			length =
-			    sprintf(buf,
+			seq_printf(m,
 				    "\n%d) Name: %s  Domain: %s Mounts: %d OS:"
 				    " %s  \n\tNOS: %s\tCapability: 0x%x\n\tSMB"
 				    " session status: %d\t",
@@ -154,10 +139,9 @@ cifs_debug_data_read(char *buf, char **beginBuffer, off_t offset,
 				atomic_read(&ses->inUse),
 				ses->serverOS, ses->serverNOS,
 				ses->capabilities, ses->status);
-			buf += length;
 		}
 		if (ses->server) {
-			buf += sprintf(buf, "TCP status: %d\n\tLocal Users To "
+			seq_printf(m, "TCP status: %d\n\tLocal Users To "
 				    "Server: %d SecMode: 0x%x Req On Wire: %d",
 				ses->server->tcpStatus,
 				atomic_read(&ses->server->socketUseCount),
@@ -165,41 +149,34 @@ cifs_debug_data_read(char *buf, char **beginBuffer, off_t offset,
 				atomic_read(&ses->server->inFlight));
 
 #ifdef CONFIG_CIFS_STATS2
-			buf += sprintf(buf, " In Send: %d In MaxReq Wait: %d",
+			seq_printf(m, " In Send: %d In MaxReq Wait: %d",
 				atomic_read(&ses->server->inSend),
 				atomic_read(&ses->server->num_waiters));
 #endif
 
-			length = sprintf(buf, "\nMIDs:\n");
-			buf += length;
+			seq_puts(m, "\nMIDs:\n");
 
 			spin_lock(&GlobalMid_Lock);
 			list_for_each(tmp1, &ses->server->pending_mid_q) {
 				mid_entry = list_entry(tmp1, struct
 					mid_q_entry,
 					qhead);
-				if (mid_entry) {
-					length = sprintf(buf,
-							"State: %d com: %d pid:"
-							" %d tsk: %p mid %d\n",
-							mid_entry->midState,
-							(int)mid_entry->command,
-							mid_entry->pid,
-							mid_entry->tsk,
-							mid_entry->mid);
-					buf += length;
-				}
+				seq_printf(m, "State: %d com: %d pid:"
+						" %d tsk: %p mid %d\n",
+						mid_entry->midState,
+						(int)mid_entry->command,
+						mid_entry->pid,
+						mid_entry->tsk,
+						mid_entry->mid);
 			}
 			spin_unlock(&GlobalMid_Lock);
 		}
 
 	}
 	read_unlock(&GlobalSMBSeslock);
-	sprintf(buf, "\n");
-	buf++;
+	seq_putc(m, '\n');
 
-	length = sprintf(buf, "Shares:");
-	buf += length;
+	seq_puts(m, "Shares:");
 
 	i = 0;
 	read_lock(&GlobalSMBSeslock);
@@ -208,62 +185,52 @@ cifs_debug_data_read(char *buf, char **beginBuffer, off_t offset,
 		i++;
 		tcon = list_entry(tmp, struct cifsTconInfo, cifsConnectionList);
 		dev_type = le32_to_cpu(tcon->fsDevInfo.DeviceType);
-		length = sprintf(buf, "\n%d) %s Uses: %d ", i,
+		seq_printf(m, "\n%d) %s Uses: %d ", i,
 				 tcon->treeName, atomic_read(&tcon->useCount));
-		buf += length;
 		if (tcon->nativeFileSystem) {
-			length = sprintf(buf, "Type: %s ",
+			seq_printf(m, "Type: %s ",
 					 tcon->nativeFileSystem);
-			buf += length;
 		}
-		length = sprintf(buf, "DevInfo: 0x%x Attributes: 0x%x"
+		seq_printf(m, "DevInfo: 0x%x Attributes: 0x%x"
 				 "\nPathComponentMax: %d Status: %d",
 			    le32_to_cpu(tcon->fsDevInfo.DeviceCharacteristics),
 			    le32_to_cpu(tcon->fsAttrInfo.Attributes),
 			    le32_to_cpu(tcon->fsAttrInfo.MaxPathNameComponentLength),
 			    tcon->tidStatus);
-		buf += length;
 		if (dev_type == FILE_DEVICE_DISK)
-			length = sprintf(buf, " type: DISK ");
+			seq_puts(m, " type: DISK ");
 		else if (dev_type == FILE_DEVICE_CD_ROM)
-			length = sprintf(buf, " type: CDROM ");
+			seq_puts(m, " type: CDROM ");
 		else
-			length =
-			    sprintf(buf, " type: %d ", dev_type);
-		buf += length;
-		if (tcon->tidStatus == CifsNeedReconnect) {
-			buf += sprintf(buf, "\tDISCONNECTED ");
-			length += 14;
-		}
+			seq_printf(m, " type: %d ", dev_type);
+
+		if (tcon->tidStatus == CifsNeedReconnect)
+			seq_puts(m, "\tDISCONNECTED ");
 	}
 	read_unlock(&GlobalSMBSeslock);
 
-	length = sprintf(buf, "\n");
-	buf += length;
+	seq_putc(m, '\n');
 
 	/* BB add code to dump additional info such as TCP session info now */
-	/* Now calculate total size of returned data */
-	length = buf - original_buf;
-
-	if (offset + count >= length)
-		*eof = 1;
-	if (length < offset) {
-		*eof = 1;
-		return 0;
-	} else {
-		length = length - offset;
-	}
-	if (length > count)
-		length = count;
+	return 0;
+}
 
-	return length;
+static int cifs_debug_data_proc_open(struct inode *inode, struct file *file)
+{
+	return single_open(file, cifs_debug_data_proc_show, NULL);
 }
 
-#ifdef CONFIG_CIFS_STATS
+static const struct file_operations cifs_debug_data_proc_fops = {
+	.owner		= THIS_MODULE,
+	.open		= cifs_debug_data_proc_open,
+	.read		= seq_read,
+	.llseek		= seq_lseek,
+	.release	= single_release,
+};
 
-static int
-cifs_stats_write(struct file *file, const char __user *buffer,
-		 unsigned long count, void *data)
+#ifdef CONFIG_CIFS_STATS
+static ssize_t cifs_stats_proc_write(struct file *file,
+		const char __user *buffer, size_t count, loff_t *ppos)
 {
 	char c;
 	int rc;
@@ -307,236 +274,132 @@ cifs_stats_write(struct file *file, const char __user *buffer,
 	return count;
 }
 
-static int
-cifs_stats_read(char *buf, char **beginBuffer, off_t offset,
-		  int count, int *eof, void *data)
+static int cifs_stats_proc_show(struct seq_file *m, void *v)
 {
-	int item_length, i, length;
+	int i;
 	struct list_head *tmp;
 	struct cifsTconInfo *tcon;
 
-	*beginBuffer = buf + offset;
-
-	length = sprintf(buf,
+	seq_printf(m,
 			"Resources in use\nCIFS Session: %d\n",
 			sesInfoAllocCount.counter);
-	buf += length;
-	item_length =
-		sprintf(buf, "Share (unique mount targets): %d\n",
+	seq_printf(m, "Share (unique mount targets): %d\n",
 			tconInfoAllocCount.counter);
-	length += item_length;
-	buf += item_length;
-	item_length =
-		sprintf(buf, "SMB Request/Response Buffer: %d Pool size: %d\n",
+	seq_printf(m, "SMB Request/Response Buffer: %d Pool size: %d\n",
 			bufAllocCount.counter,
 			cifs_min_rcv + tcpSesAllocCount.counter);
-	length += item_length;
-	buf += item_length;
-	item_length =
-		sprintf(buf, "SMB Small Req/Resp Buffer: %d Pool size: %d\n",
+	seq_printf(m, "SMB Small Req/Resp Buffer: %d Pool size: %d\n",
 			smBufAllocCount.counter, cifs_min_small);
-	length += item_length;
-	buf += item_length;
 #ifdef CONFIG_CIFS_STATS2
-	item_length = sprintf(buf, "Total Large %d Small %d Allocations\n",
+	seq_printf(m, "Total Large %d Small %d Allocations\n",
 				atomic_read(&totBufAllocCount),
 				atomic_read(&totSmBufAllocCount));
-	length += item_length;
-	buf += item_length;
 #endif /* CONFIG_CIFS_STATS2 */
 
-	item_length =
-		sprintf(buf, "Operations (MIDs): %d\n",
-			midCount.counter);
-	length += item_length;
-	buf += item_length;
-	item_length = sprintf(buf,
+	seq_printf(m, "Operations (MIDs): %d\n", midCount.counter);
+	seq_printf(m,
 		"\n%d session %d share reconnects\n",
 		tcpSesReconnectCount.counter, tconInfoReconnectCount.counter);
-	length += item_length;
-	buf += item_length;
 
-	item_length = sprintf(buf,
+	seq_printf(m,
 		"Total vfs operations: %d maximum at one time: %d\n",
 		GlobalCurrentXid, GlobalMaxActiveXid);
-	length += item_length;
-	buf += item_length;
 
 	i = 0;
 	read_lock(&GlobalSMBSeslock);
 	list_for_each(tmp, &GlobalTreeConnectionList) {
 		i++;
 		tcon = list_entry(tmp, struct cifsTconInfo, cifsConnectionList);
-		item_length = sprintf(buf, "\n%d) %s", i, tcon->treeName);
-		buf += item_length;
-		length += item_length;
-		if (tcon->tidStatus == CifsNeedReconnect) {
-			buf += sprintf(buf, "\tDISCONNECTED ");
-			length += 14;
-		}
-		item_length = sprintf(buf, "\nSMBs: %d Oplock Breaks: %d",
+		seq_printf(m, "\n%d) %s", i, tcon->treeName);
+		if (tcon->tidStatus == CifsNeedReconnect)
+			seq_puts(m, "\tDISCONNECTED ");
+		seq_printf(m, "\nSMBs: %d Oplock Breaks: %d",
 			atomic_read(&tcon->num_smbs_sent),
 			atomic_read(&tcon->num_oplock_brks));
-		buf += item_length;
-		length += item_length;
-		item_length = sprintf(buf, "\nReads:  %d Bytes: %lld",
+		seq_printf(m, "\nReads:  %d Bytes: %lld",
 			atomic_read(&tcon->num_reads),
 			(long long)(tcon->bytes_read));
-		buf += item_length;
-		length += item_length;
-		item_length = sprintf(buf, "\nWrites: %d Bytes: %lld",
+		seq_printf(m, "\nWrites: %d Bytes: %lld",
 			atomic_read(&tcon->num_writes),
 			(long long)(tcon->bytes_written));
-		buf += item_length;
-		length += item_length;
-		item_length = sprintf(buf,
+		seq_printf(m,
 			"\nLocks: %d HardLinks: %d Symlinks: %d",
 			atomic_read(&tcon->num_locks),
 			atomic_read(&tcon->num_hardlinks),
 			atomic_read(&tcon->num_symlinks));
-		buf += item_length;
-		length += item_length;
 
-		item_length = sprintf(buf, "\nOpens: %d Closes: %d Deletes: %d",
+		seq_printf(m, "\nOpens: %d Closes: %d Deletes: %d",
 			atomic_read(&tcon->num_opens),
 			atomic_read(&tcon->num_closes),
 			atomic_read(&tcon->num_deletes));
-		buf += item_length;
-		length += item_length;
-		item_length = sprintf(buf, "\nMkdirs: %d Rmdirs: %d",
+		seq_printf(m, "\nMkdirs: %d Rmdirs: %d",
 			atomic_read(&tcon->num_mkdirs),
 			atomic_read(&tcon->num_rmdirs));
-		buf += item_length;
-		length += item_length;
-		item_length = sprintf(buf, "\nRenames: %d T2 Renames %d",
+		seq_printf(m, "\nRenames: %d T2 Renames %d",
 			atomic_read(&tcon->num_renames),
 			atomic_read(&tcon->num_t2renames));
-		buf += item_length;
-		length += item_length;
-		item_length = sprintf(buf, "\nFindFirst: %d FNext %d FClose %d",
+		seq_printf(m, "\nFindFirst: %d FNext %d FClose %d",
 			atomic_read(&tcon->num_ffirst),
 			atomic_read(&tcon->num_fnext),
 			atomic_read(&tcon->num_fclose));
-		buf += item_length;
-		length += item_length;
 	}
 	read_unlock(&GlobalSMBSeslock);
 
-	buf += sprintf(buf, "\n");
-	length++;
-
-	if (offset + count >= length)
-		*eof = 1;
-	if (length < offset) {
-		*eof = 1;
-		return 0;
-	} else {
-		length = length - offset;
-	}
-	if (length > count)
-		length = count;
+	seq_putc(m, '\n');
+	return 0;
+}
 
-	return length;
+static int cifs_stats_proc_open(struct inode *inode, struct file *file)
+{
+	return single_open(file, cifs_stats_proc_show, NULL);
 }
+
+static const struct file_operations cifs_stats_proc_fops = {
+	.owner		= THIS_MODULE,
+	.open		= cifs_stats_proc_open,
+	.read		= seq_read,
+	.llseek		= seq_lseek,
+	.release	= single_release,
+	.write		= cifs_stats_proc_write,
+};
 #endif /* STATS */
 
 static struct proc_dir_entry *proc_fs_cifs;
-read_proc_t cifs_txanchor_read;
-static read_proc_t cifsFYI_read;
-static write_proc_t cifsFYI_write;
-static read_proc_t oplockEnabled_read;
-static write_proc_t oplockEnabled_write;
-static read_proc_t lookupFlag_read;
-static write_proc_t lookupFlag_write;
-static read_proc_t traceSMB_read;
-static write_proc_t traceSMB_write;
-static read_proc_t multiuser_mount_read;
-static write_proc_t multiuser_mount_write;
-static read_proc_t security_flags_read;
-static write_proc_t security_flags_write;
-/* static read_proc_t ntlmv2_enabled_read;
-static write_proc_t ntlmv2_enabled_write;
-static read_proc_t packet_signing_enabled_read;
-static write_proc_t packet_signing_enabled_write;*/
-static read_proc_t experimEnabled_read;
-static write_proc_t experimEnabled_write;
-static read_proc_t linuxExtensionsEnabled_read;
-static write_proc_t linuxExtensionsEnabled_write;
+static const struct file_operations cifsFYI_proc_fops;
+static const struct file_operations cifs_oplock_proc_fops;
+static const struct file_operations cifs_lookup_cache_proc_fops;
+static const struct file_operations traceSMB_proc_fops;
+static const struct file_operations cifs_multiuser_mount_proc_fops;
+static const struct file_operations cifs_security_flags_proc_fops;
+static const struct file_operations cifs_experimental_proc_fops;
+static const struct file_operations cifs_linux_ext_proc_fops;
 
 void
 cifs_proc_init(void)
 {
-	struct proc_dir_entry *pde;
-
 	proc_fs_cifs = proc_mkdir("fs/cifs", NULL);
 	if (proc_fs_cifs == NULL)
 		return;
 
 	proc_fs_cifs->owner = THIS_MODULE;
-	create_proc_read_entry("DebugData", 0, proc_fs_cifs,
-				cifs_debug_data_read, NULL);
+	proc_create("DebugData", 0, proc_fs_cifs, &cifs_debug_data_proc_fops);
 
 #ifdef CONFIG_CIFS_STATS
-	pde = create_proc_read_entry("Stats", 0, proc_fs_cifs,
-				cifs_stats_read, NULL);
-	if (pde)
-		pde->write_proc = cifs_stats_write;
+	proc_create("Stats", 0, proc_fs_cifs, &cifs_stats_proc_fops);
 #endif /* STATS */
-	pde = create_proc_read_entry("cifsFYI", 0, proc_fs_cifs,
-				cifsFYI_read, NULL);
-	if (pde)
-		pde->write_proc = cifsFYI_write;
-
-	pde =
-	    create_proc_read_entry("traceSMB", 0, proc_fs_cifs,
-				traceSMB_read, NULL);
-	if (pde)
-		pde->write_proc = traceSMB_write;
-
-	pde = create_proc_read_entry("OplockEnabled", 0, proc_fs_cifs,
-				oplockEnabled_read, NULL);
-	if (pde)
-		pde->write_proc = oplockEnabled_write;
-
-	pde = create_proc_read_entry("Experimental", 0, proc_fs_cifs,
-				experimEnabled_read, NULL);
-	if (pde)
-		pde->write_proc = experimEnabled_write;
-
-	pde = create_proc_read_entry("LinuxExtensionsEnabled", 0, proc_fs_cifs,
-				linuxExtensionsEnabled_read, NULL);
-	if (pde)
-		pde->write_proc = linuxExtensionsEnabled_write;
-
-	pde =
-	    create_proc_read_entry("MultiuserMount", 0, proc_fs_cifs,
-				multiuser_mount_read, NULL);
-	if (pde)
-		pde->write_proc = multiuser_mount_write;
-
-	pde =
-	    create_proc_read_entry("SecurityFlags", 0, proc_fs_cifs,
-				security_flags_read, NULL);
-	if (pde)
-		pde->write_proc = security_flags_write;
-
-	pde =
-	create_proc_read_entry("LookupCacheEnabled", 0, proc_fs_cifs,
-				lookupFlag_read, NULL);
-	if (pde)
-		pde->write_proc = lookupFlag_write;
-
-/*	pde =
-	    create_proc_read_entry("NTLMV2Enabled", 0, proc_fs_cifs,
-				ntlmv2_enabled_read, NULL);
-	if (pde)
-		pde->write_proc = ntlmv2_enabled_write;
-
-	pde =
-	    create_proc_read_entry("PacketSigningEnabled", 0, proc_fs_cifs,
-				packet_signing_enabled_read, NULL);
-	if (pde)
-		pde->write_proc = packet_signing_enabled_write;*/
+	proc_create("cifsFYI", 0, proc_fs_cifs, &cifsFYI_proc_fops);
+	proc_create("traceSMB", 0, proc_fs_cifs, &traceSMB_proc_fops);
+	proc_create("OplockEnabled", 0, proc_fs_cifs, &cifs_oplock_proc_fops);
+	proc_create("Experimental", 0, proc_fs_cifs,
+		    &cifs_experimental_proc_fops);
+	proc_create("LinuxExtensionsEnabled", 0, proc_fs_cifs,
+		    &cifs_linux_ext_proc_fops);
+	proc_create("MultiuserMount", 0, proc_fs_cifs,
+		    &cifs_multiuser_mount_proc_fops);
+	proc_create("SecurityFlags", 0, proc_fs_cifs,
+		    &cifs_security_flags_proc_fops);
+	proc_create("LookupCacheEnabled", 0, proc_fs_cifs,
+		    &cifs_lookup_cache_proc_fops);
 }
 
 void
@@ -553,39 +416,26 @@ cifs_proc_clean(void)
 #endif
 	remove_proc_entry("MultiuserMount", proc_fs_cifs);
 	remove_proc_entry("OplockEnabled", proc_fs_cifs);
-/*	remove_proc_entry("NTLMV2Enabled",proc_fs_cifs); */
 	remove_proc_entry("SecurityFlags", proc_fs_cifs);
-/*	remove_proc_entry("PacketSigningEnabled", proc_fs_cifs); */
 	remove_proc_entry("LinuxExtensionsEnabled", proc_fs_cifs);
 	remove_proc_entry("Experimental", proc_fs_cifs);
 	remove_proc_entry("LookupCacheEnabled", proc_fs_cifs);
 	remove_proc_entry("fs/cifs", NULL);
 }
 
-static int
-cifsFYI_read(char *page, char **start, off_t off, int count,
-	     int *eof, void *data)
+static int cifsFYI_proc_show(struct seq_file *m, void *v)
 {
-	int len;
-
-	len = sprintf(page, "%d\n", cifsFYI);
-
-	len -= off;
-	*start = page + off;
-
-	if (len > count)
-		len = count;
-	else
-		*eof = 1;
-
-	if (len < 0)
-		len = 0;
+	seq_printf(m, "%d\n", cifsFYI);
+	return 0;
+}
 
-	return len;
+static int cifsFYI_proc_open(struct inode *inode, struct file *file)
+{
+	return single_open(file, cifsFYI_proc_show, NULL);
 }
-static int
-cifsFYI_write(struct file *file, const char __user *buffer,
-	      unsigned long count, void *data)
+
+static ssize_t cifsFYI_proc_write(struct file *file, const char __user *buffer,
+		size_t count, loff_t *ppos)
 {
 	char c;
 	int rc;
@@ -603,30 +453,28 @@ cifsFYI_write(struct file *file, const char __user *buffer,
 	return count;
 }
 
-static int
-oplockEnabled_read(char *page, char **start, off_t off,
-		   int count, int *eof, void *data)
-{
-	int len;
-
-	len = sprintf(page, "%d\n", oplockEnabled);
-
-	len -= off;
-	*start = page + off;
+static const struct file_operations cifsFYI_proc_fops = {
+	.owner		= THIS_MODULE,
+	.open		= cifsFYI_proc_open,
+	.read		= seq_read,
+	.llseek		= seq_lseek,
+	.release	= single_release,
+	.write		= cifsFYI_proc_write,
+};
 
-	if (len > count)
-		len = count;
-	else
-		*eof = 1;
-
-	if (len < 0)
-		len = 0;
+static int cifs_oplock_proc_show(struct seq_file *m, void *v)
+{
+	seq_printf(m, "%d\n", oplockEnabled);
+	return 0;
+}
 
-	return len;
+static int cifs_oplock_proc_open(struct inode *inode, struct file *file)
+{
+	return single_open(file, cifs_oplock_proc_show, NULL);
 }
-static int
-oplockEnabled_write(struct file *file, const char __user *buffer,
-		    unsigned long count, void *data)
+
+static ssize_t cifs_oplock_proc_write(struct file *file,
+		const char __user *buffer, size_t count, loff_t *ppos)
 {
 	char c;
 	int rc;
@@ -642,30 +490,28 @@ oplockEnabled_write(struct file *file, const char __user *buffer,
 	return count;
 }
 
-static int
-experimEnabled_read(char *page, char **start, off_t off,
-		    int count, int *eof, void *data)
-{
-	int len;
-
-	len = sprintf(page, "%d\n", experimEnabled);
+static const struct file_operations cifs_oplock_proc_fops = {
+	.owner		= THIS_MODULE,
+	.open		= cifs_oplock_proc_open,
+	.read		= seq_read,
+	.llseek		= seq_lseek,
+	.release	= single_release,
+	.write		= cifs_oplock_proc_write,
+};
 
-	len -= off;
-	*start = page + off;
-
-	if (len > count)
-		len = count;
-	else
-		*eof = 1;
-
-	if (len < 0)
-		len = 0;
+static int cifs_experimental_proc_show(struct seq_file *m, void *v)
+{
+	seq_printf(m, "%d\n", experimEnabled);
+	return 0;
+}
 
-	return len;
+static int cifs_experimental_proc_open(struct inode *inode, struct file *file)
+{
+	return single_open(file, cifs_experimental_proc_show, NULL);
 }
-static int
-experimEnabled_write(struct file *file, const char __user *buffer,
-		     unsigned long count, void *data)
+
+static ssize_t cifs_experimental_proc_write(struct file *file,
+		const char __user *buffer, size_t count, loff_t *ppos)
 {
 	char c;
 	int rc;
@@ -683,29 +529,28 @@ experimEnabled_write(struct file *file, const char __user *buffer,
 	return count;
 }
 
-static int
-linuxExtensionsEnabled_read(char *page, char **start, off_t off,
-			    int count, int *eof, void *data)
-{
-	int len;
-
-	len = sprintf(page, "%d\n", linuxExtEnabled);
-	len -= off;
-	*start = page + off;
+static const struct file_operations cifs_experimental_proc_fops = {
+	.owner		= THIS_MODULE,
+	.open		= cifs_experimental_proc_open,
+	.read		= seq_read,
+	.llseek		= seq_lseek,
+	.release	= single_release,
+	.write		= cifs_experimental_proc_write,
+};
 
-	if (len > count)
-		len = count;
-	else
-		*eof = 1;
-
-	if (len < 0)
-		len = 0;
+static int cifs_linux_ext_proc_show(struct seq_file *m, void *v)
+{
+	seq_printf(m, "%d\n", linuxExtEnabled);
+	return 0;
+}
 
-	return len;
+static int cifs_linux_ext_proc_open(struct inode *inode, struct file *file)
+{
+	return single_open(file, cifs_linux_ext_proc_show, NULL);
 }
-static int
-linuxExtensionsEnabled_write(struct file *file, const char __user *buffer,
-			     unsigned long count, void *data)
+
+static ssize_t cifs_linux_ext_proc_write(struct file *file,
+		const char __user *buffer, size_t count, loff_t *ppos)
 {
 	char c;
 	int rc;
@@ -721,31 +566,28 @@ linuxExtensionsEnabled_write(struct file *file, const char __user *buffer,
 	return count;
 }
 
+static const struct file_operations cifs_linux_ext_proc_fops = {
+	.owner		= THIS_MODULE,
+	.open		= cifs_linux_ext_proc_open,
+	.read		= seq_read,
+	.llseek		= seq_lseek,
+	.release	= single_release,
+	.write		= cifs_linux_ext_proc_write,
+};
 
-static int
-lookupFlag_read(char *page, char **start, off_t off,
-		int count, int *eof, void *data)
+static int cifs_lookup_cache_proc_show(struct seq_file *m, void *v)
 {
-	int len;
-
-	len = sprintf(page, "%d\n", lookupCacheEnabled);
-
-	len -= off;
-	*start = page + off;
-
-	if (len > count)
-		len = count;
-	else
-		*eof = 1;
-
-	if (len < 0)
-		len = 0;
+	seq_printf(m, "%d\n", lookupCacheEnabled);
+	return 0;
+}
 
-	return len;
+static int cifs_lookup_cache_proc_open(struct inode *inode, struct file *file)
+{
+	return single_open(file, cifs_lookup_cache_proc_show, NULL);
 }
-static int
-lookupFlag_write(struct file *file, const char __user *buffer,
-		    unsigned long count, void *data)
+
+static ssize_t cifs_lookup_cache_proc_write(struct file *file,
+		const char __user *buffer, size_t count, loff_t *ppos)
 {
 	char c;
 	int rc;
@@ -760,30 +602,29 @@ lookupFlag_write(struct file *file, const char __user *buffer,
 
 	return count;
 }
-static int
-traceSMB_read(char *page, char **start, off_t off, int count,
-	      int *eof, void *data)
-{
-	int len;
-
-	len = sprintf(page, "%d\n", traceSMB);
-
-	len -= off;
-	*start = page + off;
 
-	if (len > count)
-		len = count;
-	else
-		*eof = 1;
+static const struct file_operations cifs_lookup_cache_proc_fops = {
+	.owner		= THIS_MODULE,
+	.open		= cifs_lookup_cache_proc_open,
+	.read		= seq_read,
+	.llseek		= seq_lseek,
+	.release	= single_release,
+	.write		= cifs_lookup_cache_proc_write,
+};
 
-	if (len < 0)
-		len = 0;
+static int traceSMB_proc_show(struct seq_file *m, void *v)
+{
+	seq_printf(m, "%d\n", traceSMB);
+	return 0;
+}
 
-	return len;
+static int traceSMB_proc_open(struct inode *inode, struct file *file)
+{
+	return single_open(file, traceSMB_proc_show, NULL);
 }
-static int
-traceSMB_write(struct file *file, const char __user *buffer,
-	       unsigned long count, void *data)
+
+static ssize_t traceSMB_proc_write(struct file *file, const char __user *buffer,
+		size_t count, loff_t *ppos)
 {
 	char c;
 	int rc;
@@ -799,30 +640,28 @@ traceSMB_write(struct file *file, const char __user *buffer,
 	return count;
 }
 
-static int
-multiuser_mount_read(char *page, char **start, off_t off,
-		     int count, int *eof, void *data)
-{
-	int len;
-
-	len = sprintf(page, "%d\n", multiuser_mount);
-
-	len -= off;
-	*start = page + off;
+static const struct file_operations traceSMB_proc_fops = {
+	.owner		= THIS_MODULE,
+	.open		= traceSMB_proc_open,
+	.read		= seq_read,
+	.llseek		= seq_lseek,
+	.release	= single_release,
+	.write		= traceSMB_proc_write,
+};
 
-	if (len > count)
-		len = count;
-	else
-		*eof = 1;
-
-	if (len < 0)
-		len = 0;
+static int cifs_multiuser_mount_proc_show(struct seq_file *m, void *v)
+{
+	seq_printf(m, "%d\n", multiuser_mount);
+	return 0;
+}
 
-	return len;
+static int cifs_multiuser_mount_proc_open(struct inode *inode, struct file *fh)
+{
+	return single_open(fh, cifs_multiuser_mount_proc_show, NULL);
 }
-static int
-multiuser_mount_write(struct file *file, const char __user *buffer,
-		      unsigned long count, void *data)
+
+static ssize_t cifs_multiuser_mount_proc_write(struct file *file,
+		const char __user *buffer, size_t count, loff_t *ppos)
 {
 	char c;
 	int rc;
@@ -838,30 +677,28 @@ multiuser_mount_write(struct file *file, const char __user *buffer,
 	return count;
 }
 
-static int
-security_flags_read(char *page, char **start, off_t off,
-		       int count, int *eof, void *data)
-{
-	int len;
-
-	len = sprintf(page, "0x%x\n", extended_security);
-
-	len -= off;
-	*start = page + off;
+static const struct file_operations cifs_multiuser_mount_proc_fops = {
+	.owner		= THIS_MODULE,
+	.open		= cifs_multiuser_mount_proc_open,
+	.read		= seq_read,
+	.llseek		= seq_lseek,
+	.release	= single_release,
+	.write		= cifs_multiuser_mount_proc_write,
+};
 
-	if (len > count)
-		len = count;
-	else
-		*eof = 1;
-
-	if (len < 0)
-		len = 0;
+static int cifs_security_flags_proc_show(struct seq_file *m, void *v)
+{
+	seq_printf(m, "0x%x\n", extended_security);
+	return 0;
+}
 
-	return len;
+static int cifs_security_flags_proc_open(struct inode *inode, struct file *file)
+{
+	return single_open(file, cifs_security_flags_proc_show, NULL);
 }
-static int
-security_flags_write(struct file *file, const char __user *buffer,
-			unsigned long count, void *data)
+
+static ssize_t cifs_security_flags_proc_write(struct file *file,
+		const char __user *buffer, size_t count, loff_t *ppos)
 {
 	unsigned int flags;
 	char flags_string[12];
@@ -917,6 +754,15 @@ security_flags_write(struct file *file, const char __user *buffer,
 	/* BB should we turn on MAY flags for other MUST options? */
 	return count;
 }
+
+static const struct file_operations cifs_security_flags_proc_fops = {
+	.owner		= THIS_MODULE,
+	.open		= cifs_security_flags_proc_open,
+	.read		= seq_read,
+	.llseek		= seq_lseek,
+	.release	= single_release,
+	.write		= cifs_security_flags_proc_write,
+};
 #else
 inline void cifs_proc_init(void)
 {
diff --git a/fs/cifs/cifs_dfs_ref.c b/fs/cifs/cifs_dfs_ref.c
index d82374c9e329..d2c8eef84f3c 100644
--- a/fs/cifs/cifs_dfs_ref.c
+++ b/fs/cifs/cifs_dfs_ref.c
@@ -226,7 +226,7 @@ static int add_mount_helper(struct vfsmount *newmnt, struct nameidata *nd,
 	int err;
 
 	mntget(newmnt);
-	err = do_add_mount(newmnt, nd, nd->path.mnt->mnt_flags, mntlist);
+	err = do_add_mount(newmnt, &nd->path, nd->path.mnt->mnt_flags, mntlist);
 	switch (err) {
 	case 0:
 		path_put(&nd->path);
diff --git a/fs/cifs/cifs_spnego.c b/fs/cifs/cifs_spnego.c
index 7013aaff6aed..117ef4bba68e 100644
--- a/fs/cifs/cifs_spnego.c
+++ b/fs/cifs/cifs_spnego.c
@@ -66,8 +66,8 @@ struct key_type cifs_spnego_key_type = {
 	.describe	= user_describe,
 };
 
-#define MAX_VER_STR_LEN   9 /* length of longest version string e.g.
-				strlen(";ver=0xFF") */
+#define MAX_VER_STR_LEN   8 /* length of longest version string e.g.
+				strlen("ver=0xFF") */
 #define MAX_MECH_STR_LEN 13 /* length of longest security mechanism name, eg
 			       in future could have strlen(";sec=ntlmsspi") */
 #define MAX_IPV6_ADDR_LEN 42 /* eg FEDC:BA98:7654:3210:FEDC:BA98:7654:3210/60 */
@@ -81,11 +81,15 @@ cifs_get_spnego_key(struct cifsSesInfo *sesInfo)
 	struct key *spnego_key;
 	const char *hostname = server->hostname;
 
-	/* BB: come up with better scheme for determining length */
-	/* length of fields (with semicolons): ver=0xyz ipv4= ipaddress host=
-	   hostname sec=mechanism uid=0x uid */
-	desc_len = MAX_VER_STR_LEN + 5 + MAX_IPV6_ADDR_LEN + 1 + 6 +
-		  strlen(hostname) + MAX_MECH_STR_LEN + 8 + (sizeof(uid_t) * 2);
+	/* length of fields (with semicolons): ver=0xyz ip4=ipaddress
+	   host=hostname sec=mechanism uid=0xFF user=username */
+	desc_len = MAX_VER_STR_LEN +
+		   6 /* len of "host=" */ + strlen(hostname) +
+		   5 /* len of ";ipv4=" */ + MAX_IPV6_ADDR_LEN +
+		   MAX_MECH_STR_LEN +
+		   7 /* len of ";uid=0x" */ + (sizeof(uid_t) * 2) +
+		   6 /* len of ";user=" */ + strlen(sesInfo->userName) + 1;
+
 	spnego_key = ERR_PTR(-ENOMEM);
 	description = kzalloc(desc_len, GFP_KERNEL);
 	if (description == NULL)
@@ -110,9 +114,11 @@ cifs_get_spnego_key(struct cifsSesInfo *sesInfo)
 
 	dp = description + strlen(description);
 
-	/* for now, only sec=krb5 is valid */
+	/* for now, only sec=krb5 and sec=mskrb5 are valid */
 	if (server->secType == Kerberos)
 		sprintf(dp, ";sec=krb5");
+	else if (server->secType == MSKerberos)
+		sprintf(dp, ";sec=mskrb5");
 	else
 		goto out;
 
diff --git a/fs/cifs/cifs_spnego.h b/fs/cifs/cifs_spnego.h
index 05a34b17a1ab..e4041ec4d712 100644
--- a/fs/cifs/cifs_spnego.h
+++ b/fs/cifs/cifs_spnego.h
@@ -23,7 +23,7 @@
 #ifndef _CIFS_SPNEGO_H
 #define _CIFS_SPNEGO_H
 
-#define CIFS_SPNEGO_UPCALL_VERSION 1
+#define CIFS_SPNEGO_UPCALL_VERSION 2
 
 /*
  * The version field should always be set to CIFS_SPNEGO_UPCALL_VERSION.
diff --git a/fs/cifs/cifsacl.c b/fs/cifs/cifsacl.c
index 0e9fc2ba90ee..57ecdc83c26f 100644
--- a/fs/cifs/cifsacl.c
+++ b/fs/cifs/cifsacl.c
@@ -56,7 +56,7 @@ int match_sid(struct cifs_sid *ctsid)
 	struct cifs_sid *cwsid;
 
 	if (!ctsid)
-		return (-1);
+		return -1;
 
 	for (i = 0; i < NUM_WK_SIDS; ++i) {
 		cwsid = &(wksidarr[i].cifssid);
@@ -87,11 +87,11 @@ int match_sid(struct cifs_sid *ctsid)
 		}
 
 		cFYI(1, ("matching sid: %s\n", wksidarr[i].sidname));
-		return (0); /* sids compare/match */
+		return 0; /* sids compare/match */
 	}
 
 	cFYI(1, ("No matching sid"));
-	return (-1);
+	return -1;
 }
 
 /* if the two SIDs (roughly equivalent to a UUID for a user or group) are
@@ -102,16 +102,16 @@ int compare_sids(const struct cifs_sid *ctsid, const struct cifs_sid *cwsid)
 	int num_subauth, num_sat, num_saw;
 
 	if ((!ctsid) || (!cwsid))
-		return (0);
+		return 0;
 
 	/* compare the revision */
 	if (ctsid->revision != cwsid->revision)
-		return (0);
+		return 0;
 
 	/* compare all of the six auth values */
 	for (i = 0; i < 6; ++i) {
 		if (ctsid->authority[i] != cwsid->authority[i])
-			return (0);
+			return 0;
 	}
 
 	/* compare all of the subauth values if any */
@@ -121,11 +121,11 @@ int compare_sids(const struct cifs_sid *ctsid, const struct cifs_sid *cwsid)
 	if (num_subauth) {
 		for (i = 0; i < num_subauth; ++i) {
 			if (ctsid->sub_auth[i] != cwsid->sub_auth[i])
-				return (0);
+				return 0;
 		}
 	}
 
-	return (1); /* sids compare/match */
+	return 1; /* sids compare/match */
 }
 
 
@@ -169,8 +169,7 @@ static void copy_sec_desc(const struct cifs_ntsd *pntsd,
 	for (i = 0; i < 6; i++)
 		ngroup_sid_ptr->authority[i] = group_sid_ptr->authority[i];
 	for (i = 0; i < 5; i++)
-		ngroup_sid_ptr->sub_auth[i] =
-				cpu_to_le32(group_sid_ptr->sub_auth[i]);
+		ngroup_sid_ptr->sub_auth[i] = group_sid_ptr->sub_auth[i];
 
 	return;
 }
@@ -285,7 +284,7 @@ static __u16 fill_ace_for_sid(struct cifs_ace *pntace,
 	size = 1 + 1 + 2 + 4 + 1 + 1 + 6 + (psid->num_subauth * 4);
 	pntace->size = cpu_to_le16(size);
 
-	return (size);
+	return size;
 }
 
 
@@ -426,7 +425,7 @@ static int set_chmod_dacl(struct cifs_acl *pndacl, struct cifs_sid *pownersid,
 	pndacl->size = cpu_to_le16(size + sizeof(struct cifs_acl));
 	pndacl->num_aces = cpu_to_le32(3);
 
-	return (0);
+	return 0;
 }
 
 
@@ -510,7 +509,7 @@ static int parse_sec_desc(struct cifs_ntsd *pntsd, int acl_len,
 			sizeof(struct cifs_sid)); */
 
 
-	return (0);
+	return 0;
 }
 
 
@@ -527,7 +526,7 @@ static int build_sec_desc(struct cifs_ntsd *pntsd, struct cifs_ntsd *pnntsd,
 	struct cifs_acl *ndacl_ptr = NULL; /* no need for SACL ptr */
 
 	if ((inode == NULL) || (pntsd == NULL) || (pnntsd == NULL))
-		return (-EIO);
+		return -EIO;
 
 	owner_sid_ptr = (struct cifs_sid *)((char *)pntsd +
 				le32_to_cpu(pntsd->osidoffset));
@@ -550,7 +549,7 @@ static int build_sec_desc(struct cifs_ntsd *pntsd, struct cifs_ntsd *pnntsd,
 	/* copy security descriptor control portion and owner and group sid */
 	copy_sec_desc(pntsd, pnntsd, sidsoffset);
 
-	return (rc);
+	return rc;
 }
 
 
@@ -629,11 +628,11 @@ static int set_cifs_acl(struct cifs_ntsd *pnntsd, __u32 acllen,
 	cFYI(DBG2, ("set ACL for %s from mode 0x%x", path, inode->i_mode));
 
 	if (!inode)
-		return (rc);
+		return rc;
 
 	sb = inode->i_sb;
 	if (sb == NULL)
-		return (rc);
+		return rc;
 
 	cifs_sb = CIFS_SB(sb);
 	xid = GetXid();
@@ -652,7 +651,7 @@ static int set_cifs_acl(struct cifs_ntsd *pnntsd, __u32 acllen,
 		if (rc != 0) {
 			cERROR(1, ("Unable to open file to set ACL"));
 			FreeXid(xid);
-			return (rc);
+			return rc;
 		}
 	}
 
@@ -665,7 +664,7 @@ static int set_cifs_acl(struct cifs_ntsd *pnntsd, __u32 acllen,
 
 	FreeXid(xid);
 
-	return (rc);
+	return rc;
 }
 
 /* Translate the CIFS ACL (simlar to NTFS ACL) for a file into mode bits */
@@ -715,7 +714,7 @@ int mode_to_acl(struct inode *inode, const char *path, __u64 nmode)
 		if (!pnntsd) {
 			cERROR(1, ("Unable to allocate security descriptor"));
 			kfree(pntsd);
-			return (-ENOMEM);
+			return -ENOMEM;
 		}
 
 		rc = build_sec_desc(pntsd, pnntsd, inode, nmode);
@@ -732,6 +731,6 @@ int mode_to_acl(struct inode *inode, const char *path, __u64 nmode)
 		kfree(pntsd);
 	}
 
-	return (rc);
+	return rc;
 }
 #endif /* CONFIG_CIFS_EXPERIMENTAL */
diff --git a/fs/cifs/cifsencrypt.c b/fs/cifs/cifsencrypt.c
index 4ff8939c6cc7..bd5f13d38450 100644
--- a/fs/cifs/cifsencrypt.c
+++ b/fs/cifs/cifsencrypt.c
@@ -294,6 +294,7 @@ void calc_lanman_hash(struct cifsSesInfo *ses, char *lnm_session_key)
 
 	if ((ses->server->secMode & SECMODE_PW_ENCRYPT) == 0)
 		if (extended_security & CIFSSEC_MAY_PLNTXT) {
+			memset(lnm_session_key, 0, CIFS_SESS_KEY_SIZE);
 			memcpy(lnm_session_key, password_with_pad,
 				CIFS_ENCPWD_SIZE);
 			return;
@@ -310,9 +311,8 @@ void calc_lanman_hash(struct cifsSesInfo *ses, char *lnm_session_key)
 	utf8 and other multibyte codepages each need their own strupper
 	function since a byte at a time will ont work. */
 
-	for (i = 0; i < CIFS_ENCPWD_SIZE; i++) {
+	for (i = 0; i < CIFS_ENCPWD_SIZE; i++)
 		password_with_pad[i] = toupper(password_with_pad[i]);
-	}
 
 	SMBencrypt(password_with_pad, ses->server->cryptKey, lnm_session_key);
 	/* clear password before we return/free memory */
diff --git a/fs/cifs/cifsfs.c b/fs/cifs/cifsfs.c
index 22857c639df5..25ecbd5b0404 100644
--- a/fs/cifs/cifsfs.c
+++ b/fs/cifs/cifsfs.c
@@ -175,6 +175,8 @@ out_no_root:
 	if (inode)
 		iput(inode);
 
+	cifs_umount(sb, cifs_sb);
+
 out_mount_failed:
 	if (cifs_sb) {
 #ifdef CONFIG_CIFS_DFS_UPCALL
@@ -267,7 +269,7 @@ cifs_statfs(struct dentry *dentry, struct kstatfs *buf)
 	return 0;
 }
 
-static int cifs_permission(struct inode *inode, int mask, struct nameidata *nd)
+static int cifs_permission(struct inode *inode, int mask)
 {
 	struct cifs_sb_info *cifs_sb;
 
@@ -766,7 +768,7 @@ const struct file_operations cifs_dir_ops = {
 };
 
 static void
-cifs_init_once(struct kmem_cache *cachep, void *inode)
+cifs_init_once(void *inode)
 {
 	struct cifsInodeInfo *cifsi = inode;
 
@@ -930,36 +932,34 @@ static int cifs_oplock_thread(void *dummyarg)
 			schedule_timeout(39*HZ);
 		} else {
 			oplock_item = list_entry(GlobalOplock_Q.next,
-				struct oplock_q_entry, qhead);
-			if (oplock_item) {
-				cFYI(1, ("found oplock item to write out"));
-				pTcon = oplock_item->tcon;
-				inode = oplock_item->pinode;
-				netfid = oplock_item->netfid;
-				spin_unlock(&GlobalMid_Lock);
-				DeleteOplockQEntry(oplock_item);
-				/* can not grab inode sem here since it would
+						struct oplock_q_entry, qhead);
+			cFYI(1, ("found oplock item to write out"));
+			pTcon = oplock_item->tcon;
+			inode = oplock_item->pinode;
+			netfid = oplock_item->netfid;
+			spin_unlock(&GlobalMid_Lock);
+			DeleteOplockQEntry(oplock_item);
+			/* can not grab inode sem here since it would
 				deadlock when oplock received on delete
 				since vfs_unlink holds the i_mutex across
 				the call */
-				/* mutex_lock(&inode->i_mutex);*/
-				if (S_ISREG(inode->i_mode)) {
-					rc =
-					   filemap_fdatawrite(inode->i_mapping);
-					if (CIFS_I(inode)->clientCanCacheRead
-									 == 0) {
-						waitrc = filemap_fdatawait(inode->i_mapping);
-						invalidate_remote_inode(inode);
-					}
-					if (rc == 0)
-						rc = waitrc;
-				} else
-					rc = 0;
-				/* mutex_unlock(&inode->i_mutex);*/
-				if (rc)
-					CIFS_I(inode)->write_behind_rc = rc;
-				cFYI(1, ("Oplock flush inode %p rc %d",
-					inode, rc));
+			/* mutex_lock(&inode->i_mutex);*/
+			if (S_ISREG(inode->i_mode)) {
+				rc = filemap_fdatawrite(inode->i_mapping);
+				if (CIFS_I(inode)->clientCanCacheRead == 0) {
+					waitrc = filemap_fdatawait(
+							      inode->i_mapping);
+					invalidate_remote_inode(inode);
+				}
+				if (rc == 0)
+					rc = waitrc;
+			} else
+				rc = 0;
+			/* mutex_unlock(&inode->i_mutex);*/
+			if (rc)
+				CIFS_I(inode)->write_behind_rc = rc;
+			cFYI(1, ("Oplock flush inode %p rc %d",
+				inode, rc));
 
 				/* releasing stale oplock after recent reconnect
 				of smb session using a now incorrect file
@@ -967,15 +967,13 @@ static int cifs_oplock_thread(void *dummyarg)
 				not bother sending an oplock release if session
 				to server still is disconnected since oplock
 				already released by the server in that case */
-				if (pTcon->tidStatus != CifsNeedReconnect) {
-				    rc = CIFSSMBLock(0, pTcon, netfid,
-					    0 /* len */ , 0 /* offset */, 0,
-					    0, LOCKING_ANDX_OPLOCK_RELEASE,
-					    false /* wait flag */);
-					cFYI(1, ("Oplock release rc = %d", rc));
-				}
-			} else
-				spin_unlock(&GlobalMid_Lock);
+			if (pTcon->tidStatus != CifsNeedReconnect) {
+				rc = CIFSSMBLock(0, pTcon, netfid,
+						0 /* len */ , 0 /* offset */, 0,
+						0, LOCKING_ANDX_OPLOCK_RELEASE,
+						false /* wait flag */);
+				cFYI(1, ("Oplock release rc = %d", rc));
+			}
 			set_current_state(TASK_INTERRUPTIBLE);
 			schedule_timeout(1);  /* yield in case q were corrupt */
 		}
@@ -1001,8 +999,7 @@ static int cifs_dnotify_thread(void *dummyarg)
 		list_for_each(tmp, &GlobalSMBSessionList) {
 			ses = list_entry(tmp, struct cifsSesInfo,
 				cifsSessionList);
-			if (ses && ses->server &&
-			     atomic_read(&ses->server->inFlight))
+			if (ses->server && atomic_read(&ses->server->inFlight))
 				wake_up_all(&ses->server->response_q);
 		}
 		read_unlock(&GlobalSMBSeslock);
diff --git a/fs/cifs/cifsfs.h b/fs/cifs/cifsfs.h
index 25a6cbd15529..135c965c4137 100644
--- a/fs/cifs/cifsfs.h
+++ b/fs/cifs/cifsfs.h
@@ -101,5 +101,5 @@ extern long cifs_ioctl(struct file *filep, unsigned int cmd, unsigned long arg);
 extern const struct export_operations cifs_export_ops;
 #endif /* EXPERIMENTAL */
 
-#define CIFS_VERSION   "1.53"
+#define CIFS_VERSION   "1.54"
 #endif				/* _CIFSFS_H */
diff --git a/fs/cifs/cifsglob.h b/fs/cifs/cifsglob.h
index 9cfcf326ead3..8dfd6f24d488 100644
--- a/fs/cifs/cifsglob.h
+++ b/fs/cifs/cifsglob.h
@@ -27,7 +27,7 @@
 #define MAX_SES_INFO 2
 #define MAX_TCON_INFO 4
 
-#define MAX_TREE_SIZE 2 + MAX_SERVER_SIZE + 1 + MAX_SHARE_SIZE + 1
+#define MAX_TREE_SIZE (2 + MAX_SERVER_SIZE + 1 + MAX_SHARE_SIZE + 1)
 #define MAX_SERVER_SIZE 15
 #define MAX_SHARE_SIZE  64	/* used to be 20, this should still be enough */
 #define MAX_USERNAME_SIZE 32	/* 32 is to allow for 15 char names + null
@@ -80,7 +80,8 @@ enum securityEnum {
 	NTLMv2,			/* Legacy NTLM auth with NTLMv2 hash */
 	RawNTLMSSP,		/* NTLMSSP without SPNEGO */
 	NTLMSSP,		/* NTLMSSP via SPNEGO */
-	Kerberos		/* Kerberos via SPNEGO */
+	Kerberos,		/* Kerberos via SPNEGO */
+	MSKerberos,		/* MS Kerberos via SPNEGO */
 };
 
 enum protocolEnum {
@@ -537,8 +538,8 @@ require use of the stronger protocol */
 #endif /* WEAK_PW_HASH */
 #define   CIFSSEC_MUST_SEAL	0x40040 /* not supported yet */
 
-#define   CIFSSEC_DEF  CIFSSEC_MAY_SIGN | CIFSSEC_MAY_NTLM | CIFSSEC_MAY_NTLMV2
-#define   CIFSSEC_MAX  CIFSSEC_MUST_SIGN | CIFSSEC_MUST_NTLMV2
+#define   CIFSSEC_DEF (CIFSSEC_MAY_SIGN | CIFSSEC_MAY_NTLM | CIFSSEC_MAY_NTLMV2)
+#define   CIFSSEC_MAX (CIFSSEC_MUST_SIGN | CIFSSEC_MUST_NTLMV2)
 #define   CIFSSEC_AUTH_MASK (CIFSSEC_MAY_NTLM | CIFSSEC_MAY_NTLMV2 | CIFSSEC_MAY_LANMAN | CIFSSEC_MAY_PLNTXT | CIFSSEC_MAY_KRB5)
 /*
  *****************************************************************
diff --git a/fs/cifs/cifspdu.h b/fs/cifs/cifspdu.h
index 0f327c224da3..d2a073edd1b8 100644
--- a/fs/cifs/cifspdu.h
+++ b/fs/cifs/cifspdu.h
@@ -31,7 +31,7 @@
 #else
 #define CIFS_PROT   0
 #endif
-#define POSIX_PROT  CIFS_PROT+1
+#define POSIX_PROT  (CIFS_PROT+1)
 #define BAD_PROT 0xFFFF
 
 /* SMB command codes */
@@ -262,7 +262,7 @@
  */
 #define CIFS_NO_HANDLE        0xFFFF
 
-#define NO_CHANGE_64          cpu_to_le64(0xFFFFFFFFFFFFFFFFULL)
+#define NO_CHANGE_64          0xFFFFFFFFFFFFFFFFULL
 #define NO_CHANGE_32          0xFFFFFFFFUL
 
 /* IPC$ in ASCII */
@@ -341,7 +341,7 @@
 #define CREATE_COMPLETE_IF_OPLK 0x00000100	/* should be zero */
 #define CREATE_NO_EA_KNOWLEDGE  0x00000200
 #define CREATE_EIGHT_DOT_THREE  0x00000400	/* doc says this is obsolete
-						 "open for recovery" flag - should
+						 "open for recovery" flag should
 						 be zero in any case */
 #define CREATE_OPEN_FOR_RECOVERY 0x00000400
 #define CREATE_RANDOM_ACCESS	0x00000800
@@ -414,8 +414,8 @@ struct smb_hdr {
 	__u8 WordCount;
 } __attribute__((packed));
 /* given a pointer to an smb_hdr retrieve the value of byte count */
-#define BCC(smb_var) ( *(__u16 *)((char *)smb_var + sizeof(struct smb_hdr) + (2 * smb_var->WordCount)))
-#define BCC_LE(smb_var) ( *(__le16 *)((char *)smb_var + sizeof(struct smb_hdr) + (2 * smb_var->WordCount)))
+#define BCC(smb_var) (*(__u16 *)((char *)smb_var + sizeof(struct smb_hdr) + (2 * smb_var->WordCount)))
+#define BCC_LE(smb_var) (*(__le16 *)((char *)smb_var + sizeof(struct smb_hdr) + (2 * smb_var->WordCount)))
 /* given a pointer to an smb_hdr retrieve the pointer to the byte area */
 #define pByteArea(smb_var) ((unsigned char *)smb_var + sizeof(struct smb_hdr) + (2 * smb_var->WordCount) + 2)
 
diff --git a/fs/cifs/cifsproto.h b/fs/cifs/cifsproto.h
index b9f5e935f821..a729d083e6f4 100644
--- a/fs/cifs/cifsproto.h
+++ b/fs/cifs/cifsproto.h
@@ -172,12 +172,13 @@ extern int CIFSSMBQFSUnixInfo(const int xid, struct cifsTconInfo *tcon);
 extern int CIFSSMBQFSPosixInfo(const int xid, struct cifsTconInfo *tcon,
 			struct kstatfs *FSData);
 
-extern int CIFSSMBSetTimes(const int xid, struct cifsTconInfo *tcon,
+extern int CIFSSMBSetPathInfo(const int xid, struct cifsTconInfo *tcon,
 			const char *fileName, const FILE_BASIC_INFO *data,
 			const struct nls_table *nls_codepage,
 			int remap_special_chars);
-extern int CIFSSMBSetFileTimes(const int xid, struct cifsTconInfo *tcon,
-			const FILE_BASIC_INFO *data, __u16 fid);
+extern int CIFSSMBSetFileInfo(const int xid, struct cifsTconInfo *tcon,
+			const FILE_BASIC_INFO *data, __u16 fid,
+			__u32 pid_of_opener);
 #if 0
 extern int CIFSSMBSetAttrLegacy(int xid, struct cifsTconInfo *tcon,
 			char *fileName, __u16 dos_attributes,
@@ -191,9 +192,20 @@ extern int CIFSSMBSetEOF(const int xid, struct cifsTconInfo *tcon,
 extern int CIFSSMBSetFileSize(const int xid, struct cifsTconInfo *tcon,
 			 __u64 size, __u16 fileHandle, __u32 opener_pid,
 			bool AllocSizeFlag);
-extern int CIFSSMBUnixSetPerms(const int xid, struct cifsTconInfo *pTcon,
-			char *full_path, __u64 mode, __u64 uid,
-			__u64 gid, dev_t dev,
+
+struct cifs_unix_set_info_args {
+	__u64	ctime;
+	__u64	atime;
+	__u64	mtime;
+	__u64	mode;
+	__u64	uid;
+	__u64	gid;
+	dev_t	device;
+};
+
+extern int CIFSSMBUnixSetInfo(const int xid, struct cifsTconInfo *pTcon,
+			char *fileName,
+			const struct cifs_unix_set_info_args *args,
 			const struct nls_table *nls_codepage,
 			int remap_special_chars);
 
diff --git a/fs/cifs/cifssmb.c b/fs/cifs/cifssmb.c
index 4511b708f0f3..994de7c90474 100644
--- a/fs/cifs/cifssmb.c
+++ b/fs/cifs/cifssmb.c
@@ -128,8 +128,7 @@ static void mark_open_files_invalid(struct cifsTconInfo *pTcon)
 	write_lock(&GlobalSMBSeslock);
 	list_for_each_safe(tmp, tmp1, &pTcon->openFileList) {
 		open_file = list_entry(tmp, struct cifsFileInfo, tlist);
-		if (open_file)
-			open_file->invalidHandle = true;
+		open_file->invalidHandle = true;
 	}
 	write_unlock(&GlobalSMBSeslock);
 	/* BB Add call to invalidate_inodes(sb) for all superblocks mounted
@@ -686,11 +685,10 @@ CIFSSMBNegotiate(unsigned int xid, struct cifsSesInfo *ses)
 						 SecurityBlob,
 						 count - 16,
 						 &server->secType);
-			if (rc == 1) {
+			if (rc == 1)
 				rc = 0;
-			} else {
+			else
 				rc = -EINVAL;
-			}
 		}
 	} else
 		server->capabilities &= ~CAP_EXTENDED_SECURITY;
@@ -3914,7 +3912,10 @@ parse_DFS_referrals(TRANSACTION2_GET_DFS_REFER_RSP *pSMBr,
 	bool is_unicode;
 	struct dfs_referral_level_3 *ref;
 
-	is_unicode = pSMBr->hdr.Flags2 & SMBFLG2_UNICODE;
+	if (pSMBr->hdr.Flags2 & SMBFLG2_UNICODE)
+		is_unicode = true;
+	else
+		is_unicode = false;
 	*num_of_nodes = le16_to_cpu(pSMBr->NumberOfReferrals);
 
 	if (*num_of_nodes < 1) {
@@ -4814,8 +4815,8 @@ CIFSSMBSetFileSize(const int xid, struct cifsTconInfo *tcon, __u64 size,
    time and resort to the original setpathinfo level which takes the ancient
    DOS time format with 2 second granularity */
 int
-CIFSSMBSetFileTimes(const int xid, struct cifsTconInfo *tcon,
-		    const FILE_BASIC_INFO *data, __u16 fid)
+CIFSSMBSetFileInfo(const int xid, struct cifsTconInfo *tcon,
+		    const FILE_BASIC_INFO *data, __u16 fid, __u32 pid_of_opener)
 {
 	struct smb_com_transaction2_sfi_req *pSMB  = NULL;
 	char *data_offset;
@@ -4828,11 +4829,8 @@ CIFSSMBSetFileTimes(const int xid, struct cifsTconInfo *tcon,
 	if (rc)
 		return rc;
 
-	/* At this point there is no need to override the current pid
-	with the pid of the opener, but that could change if we someday
-	use an existing handle (rather than opening one on the fly) */
-	/* pSMB->hdr.Pid = cpu_to_le16((__u16)pid_of_opener);
-	pSMB->hdr.PidHigh = cpu_to_le16((__u16)(pid_of_opener >> 16));*/
+	pSMB->hdr.Pid = cpu_to_le16((__u16)pid_of_opener);
+	pSMB->hdr.PidHigh = cpu_to_le16((__u16)(pid_of_opener >> 16));
 
 	params = 6;
 	pSMB->MaxSetupCount = 0;
@@ -4880,9 +4878,9 @@ CIFSSMBSetFileTimes(const int xid, struct cifsTconInfo *tcon,
 
 
 int
-CIFSSMBSetTimes(const int xid, struct cifsTconInfo *tcon, const char *fileName,
-		const FILE_BASIC_INFO *data,
-		const struct nls_table *nls_codepage, int remap)
+CIFSSMBSetPathInfo(const int xid, struct cifsTconInfo *tcon,
+		   const char *fileName, const FILE_BASIC_INFO *data,
+		   const struct nls_table *nls_codepage, int remap)
 {
 	TRANSACTION2_SPI_REQ *pSMB = NULL;
 	TRANSACTION2_SPI_RSP *pSMBr = NULL;
@@ -5011,10 +5009,9 @@ SetAttrLgcyRetry:
 #endif /* temporarily unneeded SetAttr legacy function */
 
 int
-CIFSSMBUnixSetPerms(const int xid, struct cifsTconInfo *tcon,
-		    char *fileName, __u64 mode, __u64 uid, __u64 gid,
-		    dev_t device, const struct nls_table *nls_codepage,
-		    int remap)
+CIFSSMBUnixSetInfo(const int xid, struct cifsTconInfo *tcon, char *fileName,
+		   const struct cifs_unix_set_info_args *args,
+		   const struct nls_table *nls_codepage, int remap)
 {
 	TRANSACTION2_SPI_REQ *pSMB = NULL;
 	TRANSACTION2_SPI_RSP *pSMBr = NULL;
@@ -5023,6 +5020,7 @@ CIFSSMBUnixSetPerms(const int xid, struct cifsTconInfo *tcon,
 	int bytes_returned = 0;
 	FILE_UNIX_BASIC_INFO *data_offset;
 	__u16 params, param_offset, offset, count, byte_count;
+	__u64 mode = args->mode;
 
 	cFYI(1, ("In SetUID/GID/Mode"));
 setPermsRetry:
@@ -5078,16 +5076,16 @@ setPermsRetry:
 	set file size and do not want to truncate file size to zero
 	accidently as happened on one Samba server beta by putting
 	zero instead of -1 here */
-	data_offset->EndOfFile = NO_CHANGE_64;
-	data_offset->NumOfBytes = NO_CHANGE_64;
-	data_offset->LastStatusChange = NO_CHANGE_64;
-	data_offset->LastAccessTime = NO_CHANGE_64;
-	data_offset->LastModificationTime = NO_CHANGE_64;
-	data_offset->Uid = cpu_to_le64(uid);
-	data_offset->Gid = cpu_to_le64(gid);
+	data_offset->EndOfFile = cpu_to_le64(NO_CHANGE_64);
+	data_offset->NumOfBytes = cpu_to_le64(NO_CHANGE_64);
+	data_offset->LastStatusChange = cpu_to_le64(args->ctime);
+	data_offset->LastAccessTime = cpu_to_le64(args->atime);
+	data_offset->LastModificationTime = cpu_to_le64(args->mtime);
+	data_offset->Uid = cpu_to_le64(args->uid);
+	data_offset->Gid = cpu_to_le64(args->gid);
 	/* better to leave device as zero when it is  */
-	data_offset->DevMajor = cpu_to_le64(MAJOR(device));
-	data_offset->DevMinor = cpu_to_le64(MINOR(device));
+	data_offset->DevMajor = cpu_to_le64(MAJOR(args->device));
+	data_offset->DevMinor = cpu_to_le64(MINOR(args->device));
 	data_offset->Permissions = cpu_to_le64(mode);
 
 	if (S_ISREG(mode))
diff --git a/fs/cifs/connect.c b/fs/cifs/connect.c
index e8fa46c7cff2..4c13bcdb92a5 100644
--- a/fs/cifs/connect.c
+++ b/fs/cifs/connect.c
@@ -151,7 +151,7 @@ cifs_reconnect(struct TCP_Server_Info *server)
 	}
 	list_for_each(tmp, &GlobalTreeConnectionList) {
 		tcon = list_entry(tmp, struct cifsTconInfo, cifsConnectionList);
-		if ((tcon) && (tcon->ses) && (tcon->ses->server == server))
+		if ((tcon->ses) && (tcon->ses->server == server))
 			tcon->tidStatus = CifsNeedReconnect;
 	}
 	read_unlock(&GlobalSMBSeslock);
@@ -173,14 +173,12 @@ cifs_reconnect(struct TCP_Server_Info *server)
 		mid_entry = list_entry(tmp, struct
 					mid_q_entry,
 					qhead);
-		if (mid_entry) {
-			if (mid_entry->midState == MID_REQUEST_SUBMITTED) {
+		if (mid_entry->midState == MID_REQUEST_SUBMITTED) {
 				/* Mark other intransit requests as needing
 				   retry so we do not immediately mark the
 				   session bad again (ie after we reconnect
 				   below) as they timeout too */
-				mid_entry->midState = MID_RETRY_NEEDED;
-			}
+			mid_entry->midState = MID_RETRY_NEEDED;
 		}
 	}
 	spin_unlock(&GlobalMid_Lock);
@@ -351,11 +349,9 @@ cifs_demultiplex_thread(struct TCP_Server_Info *server)
 
 	current->flags |= PF_MEMALLOC;
 	cFYI(1, ("Demultiplex PID: %d", task_pid_nr(current)));
-	write_lock(&GlobalSMBSeslock);
-	atomic_inc(&tcpSesAllocCount);
-	length = tcpSesAllocCount.counter;
-	write_unlock(&GlobalSMBSeslock);
-	if (length  > 1)
+
+	length = atomic_inc_return(&tcpSesAllocCount);
+	if (length > 1)
 		mempool_resize(cifs_req_poolp, length + cifs_min_rcv,
 				GFP_KERNEL);
 
@@ -455,7 +451,7 @@ incomplete_rcv:
 		/* Note that FC 1001 length is big endian on the wire,
 		but we convert it here so it is always manipulated
 		as host byte order */
-		pdu_length = ntohl(smb_buffer->smb_buf_length);
+		pdu_length = be32_to_cpu((__force __be32)smb_buffer->smb_buf_length);
 		smb_buffer->smb_buf_length = pdu_length;
 
 		cFYI(1, ("rfc1002 length 0x%x", pdu_length+4));
@@ -745,14 +741,11 @@ multi_t2_fnd:
 		coming home not much else we can do but free the memory */
 	}
 
-	write_lock(&GlobalSMBSeslock);
-	atomic_dec(&tcpSesAllocCount);
-	length = tcpSesAllocCount.counter;
-
 	/* last chance to mark ses pointers invalid
 	if there are any pointing to this (e.g
 	if a crazy root user tried to kill cifsd
 	kernel thread explicitly this might happen) */
+	write_lock(&GlobalSMBSeslock);
 	list_for_each(tmp, &GlobalSMBSessionList) {
 		ses = list_entry(tmp, struct cifsSesInfo,
 				cifsSessionList);
@@ -763,6 +756,8 @@ multi_t2_fnd:
 
 	kfree(server->hostname);
 	kfree(server);
+
+	length = atomic_dec_return(&tcpSesAllocCount);
 	if (length  > 0)
 		mempool_resize(cifs_req_poolp, length + cifs_min_rcv,
 				GFP_KERNEL);
@@ -1461,6 +1456,39 @@ get_dfs_path(int xid, struct cifsSesInfo *pSesInfo, const char *old_path,
 	return rc;
 }
 
+#ifdef CONFIG_DEBUG_LOCK_ALLOC
+static struct lock_class_key cifs_key[2];
+static struct lock_class_key cifs_slock_key[2];
+
+static inline void
+cifs_reclassify_socket4(struct socket *sock)
+{
+	struct sock *sk = sock->sk;
+	BUG_ON(sock_owned_by_user(sk));
+	sock_lock_init_class_and_name(sk, "slock-AF_INET-CIFS",
+		&cifs_slock_key[0], "sk_lock-AF_INET-CIFS", &cifs_key[0]);
+}
+
+static inline void
+cifs_reclassify_socket6(struct socket *sock)
+{
+	struct sock *sk = sock->sk;
+	BUG_ON(sock_owned_by_user(sk));
+	sock_lock_init_class_and_name(sk, "slock-AF_INET6-CIFS",
+		&cifs_slock_key[1], "sk_lock-AF_INET6-CIFS", &cifs_key[1]);
+}
+#else
+static inline void
+cifs_reclassify_socket4(struct socket *sock)
+{
+}
+
+static inline void
+cifs_reclassify_socket6(struct socket *sock)
+{
+}
+#endif
+
 /* See RFC1001 section 14 on representation of Netbios names */
 static void rfc1002mangle(char *target, char *source, unsigned int length)
 {
@@ -1495,6 +1523,7 @@ ipv4_connect(struct sockaddr_in *psin_server, struct socket **csocket,
 		/* BB other socket options to set KEEPALIVE, NODELAY? */
 			cFYI(1, ("Socket created"));
 			(*csocket)->sk->sk_allocation = GFP_NOFS;
+			cifs_reclassify_socket4(*csocket);
 		}
 	}
 
@@ -1627,6 +1656,7 @@ ipv6_connect(struct sockaddr_in6 *psin_server, struct socket **csocket)
 		/* BB other socket options to set KEEPALIVE, NODELAY? */
 			 cFYI(1, ("ipv6 Socket created"));
 			(*csocket)->sk->sk_allocation = GFP_NOFS;
+			cifs_reclassify_socket6(*csocket);
 		}
 	}
 
@@ -3568,19 +3598,21 @@ int cifs_setup_session(unsigned int xid, struct cifsSesInfo *pSesInfo,
 	char ntlm_session_key[CIFS_SESS_KEY_SIZE];
 	bool ntlmv2_flag = false;
 	int first_time = 0;
+	struct TCP_Server_Info *server = pSesInfo->server;
 
 	/* what if server changes its buffer size after dropping the session? */
-	if (pSesInfo->server->maxBuf == 0) /* no need to send on reconnect */ {
+	if (server->maxBuf == 0) /* no need to send on reconnect */ {
 		rc = CIFSSMBNegotiate(xid, pSesInfo);
-		if (rc == -EAGAIN) /* retry only once on 1st time connection */ {
+		if (rc == -EAGAIN) {
+			/* retry only once on 1st time connection */
 			rc = CIFSSMBNegotiate(xid, pSesInfo);
 			if (rc == -EAGAIN)
 				rc = -EHOSTDOWN;
 		}
 		if (rc == 0) {
 			spin_lock(&GlobalMid_Lock);
-			if (pSesInfo->server->tcpStatus != CifsExiting)
-				pSesInfo->server->tcpStatus = CifsGood;
+			if (server->tcpStatus != CifsExiting)
+				server->tcpStatus = CifsGood;
 			else
 				rc = -EHOSTDOWN;
 			spin_unlock(&GlobalMid_Lock);
@@ -3588,97 +3620,90 @@ int cifs_setup_session(unsigned int xid, struct cifsSesInfo *pSesInfo,
 		}
 		first_time = 1;
 	}
-	if (!rc) {
-		pSesInfo->flags = 0;
-		pSesInfo->capabilities = pSesInfo->server->capabilities;
-		if (linuxExtEnabled == 0)
-			pSesInfo->capabilities &= (~CAP_UNIX);
+
+	if (rc)
+		goto ss_err_exit;
+
+	pSesInfo->flags = 0;
+	pSesInfo->capabilities = server->capabilities;
+	if (linuxExtEnabled == 0)
+		pSesInfo->capabilities &= (~CAP_UNIX);
 	/*	pSesInfo->sequence_number = 0;*/
-		cFYI(1,
-		      ("Security Mode: 0x%x Capabilities: 0x%x TimeAdjust: %d",
-			pSesInfo->server->secMode,
-			pSesInfo->server->capabilities,
-			pSesInfo->server->timeAdj));
-		if (experimEnabled < 2)
-			rc = CIFS_SessSetup(xid, pSesInfo,
-					    first_time, nls_info);
-		else if (extended_security
-				&& (pSesInfo->capabilities
-					& CAP_EXTENDED_SECURITY)
-				&& (pSesInfo->server->secType == NTLMSSP)) {
-			rc = -EOPNOTSUPP;
-		} else if (extended_security
-			   && (pSesInfo->capabilities & CAP_EXTENDED_SECURITY)
-			   && (pSesInfo->server->secType == RawNTLMSSP)) {
-			cFYI(1, ("NTLMSSP sesssetup"));
-			rc = CIFSNTLMSSPNegotiateSessSetup(xid,
-						pSesInfo,
-						&ntlmv2_flag,
-						nls_info);
-			if (!rc) {
-				if (ntlmv2_flag) {
-					char *v2_response;
-					cFYI(1, ("more secure NTLM ver2 hash"));
-					if (CalcNTLMv2_partial_mac_key(pSesInfo,
-						nls_info)) {
-						rc = -ENOMEM;
-						goto ss_err_exit;
-					} else
-						v2_response = kmalloc(16 + 64 /* blob */, GFP_KERNEL);
-					if (v2_response) {
-						CalcNTLMv2_response(pSesInfo,
-								   v2_response);
-				/*		if (first_time)
-						  cifs_calculate_ntlmv2_mac_key(
-						   pSesInfo->server->mac_signing_key,
-						   response, ntlm_session_key,*/
-						kfree(v2_response);
+	cFYI(1, ("Security Mode: 0x%x Capabilities: 0x%x TimeAdjust: %d",
+		 server->secMode, server->capabilities, server->timeAdj));
+
+	if (experimEnabled < 2)
+		rc = CIFS_SessSetup(xid, pSesInfo, first_time, nls_info);
+	else if (extended_security
+			&& (pSesInfo->capabilities & CAP_EXTENDED_SECURITY)
+			&& (server->secType == NTLMSSP)) {
+		rc = -EOPNOTSUPP;
+	} else if (extended_security
+			&& (pSesInfo->capabilities & CAP_EXTENDED_SECURITY)
+			&& (server->secType == RawNTLMSSP)) {
+		cFYI(1, ("NTLMSSP sesssetup"));
+		rc = CIFSNTLMSSPNegotiateSessSetup(xid, pSesInfo, &ntlmv2_flag,
+						   nls_info);
+		if (!rc) {
+			if (ntlmv2_flag) {
+				char *v2_response;
+				cFYI(1, ("more secure NTLM ver2 hash"));
+				if (CalcNTLMv2_partial_mac_key(pSesInfo,
+								nls_info)) {
+					rc = -ENOMEM;
+					goto ss_err_exit;
+				} else
+					v2_response = kmalloc(16 + 64 /* blob*/,
+								GFP_KERNEL);
+				if (v2_response) {
+					CalcNTLMv2_response(pSesInfo,
+								v2_response);
+				/*	if (first_time)
+						cifs_calculate_ntlmv2_mac_key */
+					kfree(v2_response);
 					/* BB Put dummy sig in SessSetup PDU? */
-					} else {
-						rc = -ENOMEM;
-						goto ss_err_exit;
-					}
-
 				} else {
-					SMBNTencrypt(pSesInfo->password,
-						pSesInfo->server->cryptKey,
-						ntlm_session_key);
-
-					if (first_time)
-						cifs_calculate_mac_key(
-							&pSesInfo->server->mac_signing_key,
-							ntlm_session_key,
-							pSesInfo->password);
+					rc = -ENOMEM;
+					goto ss_err_exit;
 				}
+
+			} else {
+				SMBNTencrypt(pSesInfo->password,
+					     server->cryptKey,
+					     ntlm_session_key);
+
+				if (first_time)
+					cifs_calculate_mac_key(
+					     &server->mac_signing_key,
+					     ntlm_session_key,
+					     pSesInfo->password);
+			}
 			/* for better security the weaker lanman hash not sent
 			   in AuthSessSetup so we no longer calculate it */
 
-				rc = CIFSNTLMSSPAuthSessSetup(xid,
-					pSesInfo,
-					ntlm_session_key,
-					ntlmv2_flag,
-					nls_info);
-			}
-		} else { /* old style NTLM 0.12 session setup */
-			SMBNTencrypt(pSesInfo->password,
-				pSesInfo->server->cryptKey,
-				ntlm_session_key);
+			rc = CIFSNTLMSSPAuthSessSetup(xid, pSesInfo,
+						      ntlm_session_key,
+						      ntlmv2_flag,
+						      nls_info);
+		}
+	} else { /* old style NTLM 0.12 session setup */
+		SMBNTencrypt(pSesInfo->password, server->cryptKey,
+			     ntlm_session_key);
 
-			if (first_time)
-				cifs_calculate_mac_key(
-					&pSesInfo->server->mac_signing_key,
-					ntlm_session_key, pSesInfo->password);
+		if (first_time)
+			cifs_calculate_mac_key(&server->mac_signing_key,
+						ntlm_session_key,
+						pSesInfo->password);
 
-			rc = CIFSSessSetup(xid, pSesInfo,
-				ntlm_session_key, nls_info);
-		}
-		if (rc) {
-			cERROR(1, ("Send error in SessSetup = %d", rc));
-		} else {
-			cFYI(1, ("CIFS Session Established successfully"));
+		rc = CIFSSessSetup(xid, pSesInfo, ntlm_session_key, nls_info);
+	}
+	if (rc) {
+		cERROR(1, ("Send error in SessSetup = %d", rc));
+	} else {
+		cFYI(1, ("CIFS Session Established successfully"));
 			pSesInfo->status = CifsGood;
-		}
 	}
+
 ss_err_exit:
 	return rc;
 }
diff --git a/fs/cifs/dir.c b/fs/cifs/dir.c
index fb69c1fa85c9..e962e75e6f7b 100644
--- a/fs/cifs/dir.c
+++ b/fs/cifs/dir.c
@@ -226,23 +226,28 @@ cifs_create(struct inode *inode, struct dentry *direntry, int mode,
 		/* If Open reported that we actually created a file
 		then we now have to set the mode if possible */
 		if ((pTcon->unix_ext) && (oplock & CIFS_CREATE_ACTION)) {
+			struct cifs_unix_set_info_args args = {
+				.mode	= mode,
+				.ctime	= NO_CHANGE_64,
+				.atime	= NO_CHANGE_64,
+				.mtime	= NO_CHANGE_64,
+				.device	= 0,
+			};
+
 			if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_SET_UID) {
-				CIFSSMBUnixSetPerms(xid, pTcon, full_path, mode,
-					(__u64)current->fsuid,
-					(__u64)current->fsgid,
-					0 /* dev */,
-					cifs_sb->local_nls,
-					cifs_sb->mnt_cifs_flags &
-						CIFS_MOUNT_MAP_SPECIAL_CHR);
+				args.uid = (__u64) current->fsuid;
+				if (inode->i_mode & S_ISGID)
+					args.gid = (__u64) inode->i_gid;
+				else
+					args.gid = (__u64) current->fsgid;
 			} else {
-				CIFSSMBUnixSetPerms(xid, pTcon, full_path, mode,
-					(__u64)-1,
-					(__u64)-1,
-					0 /* dev */,
-					cifs_sb->local_nls,
-					cifs_sb->mnt_cifs_flags &
-						CIFS_MOUNT_MAP_SPECIAL_CHR);
+				args.uid = NO_CHANGE_64;
+				args.gid = NO_CHANGE_64;
 			}
+			CIFSSMBUnixSetInfo(xid, pTcon, full_path, &args,
+				cifs_sb->local_nls,
+				cifs_sb->mnt_cifs_flags &
+					CIFS_MOUNT_MAP_SPECIAL_CHR);
 		} else {
 			/* BB implement mode setting via Windows security
 			   descriptors e.g. */
@@ -267,7 +272,12 @@ cifs_create(struct inode *inode, struct dentry *direntry, int mode,
 				    (cifs_sb->mnt_cifs_flags &
 				     CIFS_MOUNT_SET_UID)) {
 					newinode->i_uid = current->fsuid;
-					newinode->i_gid = current->fsgid;
+					if (inode->i_mode & S_ISGID)
+						newinode->i_gid =
+							inode->i_gid;
+					else
+						newinode->i_gid =
+							current->fsgid;
 				}
 			}
 		}
@@ -357,21 +367,24 @@ int cifs_mknod(struct inode *inode, struct dentry *direntry, int mode,
 	if (full_path == NULL)
 		rc = -ENOMEM;
 	else if (pTcon->unix_ext) {
-		mode &= ~current->fs->umask;
+		struct cifs_unix_set_info_args args = {
+			.mode	= mode & ~current->fs->umask,
+			.ctime	= NO_CHANGE_64,
+			.atime	= NO_CHANGE_64,
+			.mtime	= NO_CHANGE_64,
+			.device	= device_number,
+		};
 		if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_SET_UID) {
-			rc = CIFSSMBUnixSetPerms(xid, pTcon, full_path,
-				mode, (__u64)current->fsuid,
-				(__u64)current->fsgid,
-				device_number, cifs_sb->local_nls,
-				cifs_sb->mnt_cifs_flags &
-					CIFS_MOUNT_MAP_SPECIAL_CHR);
+			args.uid = (__u64) current->fsuid;
+			args.gid = (__u64) current->fsgid;
 		} else {
-			rc = CIFSSMBUnixSetPerms(xid, pTcon,
-				full_path, mode, (__u64)-1, (__u64)-1,
-				device_number, cifs_sb->local_nls,
-				cifs_sb->mnt_cifs_flags &
-					CIFS_MOUNT_MAP_SPECIAL_CHR);
+			args.uid = NO_CHANGE_64;
+			args.gid = NO_CHANGE_64;
 		}
+		rc = CIFSSMBUnixSetInfo(xid, pTcon, full_path,
+			&args, cifs_sb->local_nls,
+			cifs_sb->mnt_cifs_flags &
+				CIFS_MOUNT_MAP_SPECIAL_CHR);
 
 		if (!rc) {
 			rc = cifs_get_inode_info_unix(&newinode, full_path,
diff --git a/fs/cifs/dns_resolve.c b/fs/cifs/dns_resolve.c
index f730ef35499e..a2e0673e1b08 100644
--- a/fs/cifs/dns_resolve.c
+++ b/fs/cifs/dns_resolve.c
@@ -47,11 +47,18 @@ static int dns_resolver_instantiate(struct key *key, const void *data,
 	return rc;
 }
 
+static void
+dns_resolver_destroy(struct key *key)
+{
+	kfree(key->payload.data);
+}
+
 struct key_type key_type_dns_resolver = {
 	.name        = "dns_resolver",
 	.def_datalen = sizeof(struct in_addr),
 	.describe    = user_describe,
 	.instantiate = dns_resolver_instantiate,
+	.destroy     = dns_resolver_destroy,
 	.match       = user_match,
 };
 
diff --git a/fs/cifs/file.c b/fs/cifs/file.c
index 0aac824371a5..cbefe1f1f9fe 100644
--- a/fs/cifs/file.c
+++ b/fs/cifs/file.c
@@ -310,18 +310,19 @@ int cifs_open(struct inode *inode, struct file *file)
 		/* time to set mode which we can not set earlier due to
 		   problems creating new read-only files */
 		if (pTcon->unix_ext) {
-			CIFSSMBUnixSetPerms(xid, pTcon, full_path,
-					    inode->i_mode,
-					    (__u64)-1, (__u64)-1, 0 /* dev */,
+			struct cifs_unix_set_info_args args = {
+				.mode	= inode->i_mode,
+				.uid	= NO_CHANGE_64,
+				.gid	= NO_CHANGE_64,
+				.ctime	= NO_CHANGE_64,
+				.atime	= NO_CHANGE_64,
+				.mtime	= NO_CHANGE_64,
+				.device	= 0,
+			};
+			CIFSSMBUnixSetInfo(xid, pTcon, full_path, &args,
 					    cifs_sb->local_nls,
 					    cifs_sb->mnt_cifs_flags &
 						CIFS_MOUNT_MAP_SPECIAL_CHR);
-		} else {
-			/* BB implement via Windows security descriptors eg
-			   CIFSSMBWinSetPerms(xid, pTcon, full_path, mode,
-					      -1, -1, local_nls);
-			   in the meantime could set r/o dos attribute when
-			   perms are eg: mode & 0222 == 0 */
 		}
 	}
 
@@ -832,6 +833,10 @@ ssize_t cifs_user_write(struct file *file, const char __user *write_data,
 		return -EBADF;
 	open_file = (struct cifsFileInfo *) file->private_data;
 
+	rc = generic_write_checks(file, poffset, &write_size, 0);
+	if (rc)
+		return rc;
+
 	xid = GetXid();
 
 	if (*poffset > file->f_path.dentry->d_inode->i_size)
@@ -1280,7 +1285,7 @@ retry:
 
 			if (first < 0)
 				lock_page(page);
-			else if (TestSetPageLocked(page))
+			else if (!trylock_page(page))
 				break;
 
 			if (unlikely(page->mapping != mapping)) {
diff --git a/fs/cifs/inode.c b/fs/cifs/inode.c
index 2e904bd111c8..9c548f110102 100644
--- a/fs/cifs/inode.c
+++ b/fs/cifs/inode.c
@@ -546,7 +546,8 @@ int cifs_get_inode_info(struct inode **pinode,
 		if ((inode->i_mode & S_IWUGO) == 0 &&
 		    (attr & ATTR_READONLY) == 0)
 			inode->i_mode |= (S_IWUGO & default_mode);
-			inode->i_mode &= ~S_IFMT;
+
+		inode->i_mode &= ~S_IFMT;
 	}
 	/* clear write bits if ATTR_READONLY is set */
 	if (attr & ATTR_READONLY)
@@ -649,6 +650,7 @@ struct inode *cifs_iget(struct super_block *sb, unsigned long ino)
 		inode->i_fop = &simple_dir_operations;
 		inode->i_uid = cifs_sb->mnt_uid;
 		inode->i_gid = cifs_sb->mnt_gid;
+	} else if (rc) {
 		_FreeXid(xid);
 		iget_failed(inode);
 		return ERR_PTR(rc);
@@ -737,7 +739,7 @@ psx_del_no_retry:
 			/* ATTRS set to normal clears r/o bit */
 			pinfo_buf->Attributes = cpu_to_le32(ATTR_NORMAL);
 			if (!(pTcon->ses->flags & CIFS_SES_NT4))
-				rc = CIFSSMBSetTimes(xid, pTcon, full_path,
+				rc = CIFSSMBSetPathInfo(xid, pTcon, full_path,
 						     pinfo_buf,
 						     cifs_sb->local_nls,
 						     cifs_sb->mnt_cifs_flags &
@@ -767,9 +769,10 @@ psx_del_no_retry:
 						 cifs_sb->mnt_cifs_flags &
 						    CIFS_MOUNT_MAP_SPECIAL_CHR);
 				if (rc == 0) {
-					rc = CIFSSMBSetFileTimes(xid, pTcon,
-								 pinfo_buf,
-								 netfid);
+					rc = CIFSSMBSetFileInfo(xid, pTcon,
+								pinfo_buf,
+								netfid,
+								current->tgid);
 					CIFSSMBClose(xid, pTcon, netfid);
 				}
 			}
@@ -984,32 +987,41 @@ mkdir_get_info:
 		  * failed to get it from the server or was set bogus */
 		if ((direntry->d_inode) && (direntry->d_inode->i_nlink < 2))
 				direntry->d_inode->i_nlink = 2;
+
 		mode &= ~current->fs->umask;
+		/* must turn on setgid bit if parent dir has it */
+		if (inode->i_mode & S_ISGID)
+			mode |= S_ISGID;
+
 		if (pTcon->unix_ext) {
+			struct cifs_unix_set_info_args args = {
+				.mode	= mode,
+				.ctime	= NO_CHANGE_64,
+				.atime	= NO_CHANGE_64,
+				.mtime	= NO_CHANGE_64,
+				.device	= 0,
+			};
 			if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_SET_UID) {
-				CIFSSMBUnixSetPerms(xid, pTcon, full_path,
-						    mode,
-						    (__u64)current->fsuid,
-						    (__u64)current->fsgid,
-						    0 /* dev_t */,
-						    cifs_sb->local_nls,
-						    cifs_sb->mnt_cifs_flags &
-						    CIFS_MOUNT_MAP_SPECIAL_CHR);
+				args.uid = (__u64)current->fsuid;
+				if (inode->i_mode & S_ISGID)
+					args.gid = (__u64)inode->i_gid;
+				else
+					args.gid = (__u64)current->fsgid;
 			} else {
-				CIFSSMBUnixSetPerms(xid, pTcon, full_path,
-						    mode, (__u64)-1,
-						    (__u64)-1, 0 /* dev_t */,
-						    cifs_sb->local_nls,
-						    cifs_sb->mnt_cifs_flags &
-						    CIFS_MOUNT_MAP_SPECIAL_CHR);
+				args.uid = NO_CHANGE_64;
+				args.gid = NO_CHANGE_64;
 			}
+			CIFSSMBUnixSetInfo(xid, pTcon, full_path, &args,
+					    cifs_sb->local_nls,
+					    cifs_sb->mnt_cifs_flags &
+					    CIFS_MOUNT_MAP_SPECIAL_CHR);
 		} else {
 			if (!(cifs_sb->mnt_cifs_flags & CIFS_MOUNT_CIFS_ACL) &&
 			    (mode & S_IWUGO) == 0) {
 				FILE_BASIC_INFO pInfo;
 				memset(&pInfo, 0, sizeof(pInfo));
 				pInfo.Attributes = cpu_to_le32(ATTR_READONLY);
-				CIFSSMBSetTimes(xid, pTcon, full_path,
+				CIFSSMBSetPathInfo(xid, pTcon, full_path,
 						&pInfo, cifs_sb->local_nls,
 						cifs_sb->mnt_cifs_flags &
 						CIFS_MOUNT_MAP_SPECIAL_CHR);
@@ -1024,8 +1036,12 @@ mkdir_get_info:
 				     CIFS_MOUNT_SET_UID) {
 					direntry->d_inode->i_uid =
 						current->fsuid;
-					direntry->d_inode->i_gid =
-						current->fsgid;
+					if (inode->i_mode & S_ISGID)
+						direntry->d_inode->i_gid =
+							inode->i_gid;
+					else
+						direntry->d_inode->i_gid =
+							current->fsgid;
 				}
 			}
 		}
@@ -1310,10 +1326,11 @@ int cifs_revalidate(struct dentry *direntry)
 /*		if (S_ISDIR(direntry->d_inode->i_mode))
 			shrink_dcache_parent(direntry); */
 		if (S_ISREG(direntry->d_inode->i_mode)) {
-			if (direntry->d_inode->i_mapping)
+			if (direntry->d_inode->i_mapping) {
 				wbrc = filemap_fdatawait(direntry->d_inode->i_mapping);
 				if (wbrc)
 					CIFS_I(direntry->d_inode)->write_behind_rc = wbrc;
+			}
 			/* may eventually have to do this for open files too */
 			if (list_empty(&(cifsInode->openFileList))) {
 				/* changed on server - flush read ahead pages */
@@ -1413,31 +1430,304 @@ out_busy:
 	return -ETXTBSY;
 }
 
-int cifs_setattr(struct dentry *direntry, struct iattr *attrs)
+static int
+cifs_set_file_size(struct inode *inode, struct iattr *attrs,
+		   int xid, char *full_path)
 {
+	int rc;
+	struct cifsFileInfo *open_file;
+	struct cifsInodeInfo *cifsInode = CIFS_I(inode);
+	struct cifs_sb_info *cifs_sb = CIFS_SB(inode->i_sb);
+	struct cifsTconInfo *pTcon = cifs_sb->tcon;
+
+	/*
+	 * To avoid spurious oplock breaks from server, in the case of
+	 * inodes that we already have open, avoid doing path based
+	 * setting of file size if we can do it by handle.
+	 * This keeps our caching token (oplock) and avoids timeouts
+	 * when the local oplock break takes longer to flush
+	 * writebehind data than the SMB timeout for the SetPathInfo
+	 * request would allow
+	 */
+	open_file = find_writable_file(cifsInode);
+	if (open_file) {
+		__u16 nfid = open_file->netfid;
+		__u32 npid = open_file->pid;
+		rc = CIFSSMBSetFileSize(xid, pTcon, attrs->ia_size, nfid,
+					npid, false);
+		atomic_dec(&open_file->wrtPending);
+		cFYI(1, ("SetFSize for attrs rc = %d", rc));
+		if ((rc == -EINVAL) || (rc == -EOPNOTSUPP)) {
+			unsigned int bytes_written;
+			rc = CIFSSMBWrite(xid, pTcon, nfid, 0, attrs->ia_size,
+					  &bytes_written, NULL, NULL, 1);
+			cFYI(1, ("Wrt seteof rc %d", rc));
+		}
+	} else
+		rc = -EINVAL;
+
+	if (rc != 0) {
+		/* Set file size by pathname rather than by handle
+		   either because no valid, writeable file handle for
+		   it was found or because there was an error setting
+		   it by handle */
+		rc = CIFSSMBSetEOF(xid, pTcon, full_path, attrs->ia_size,
+				   false, cifs_sb->local_nls,
+				   cifs_sb->mnt_cifs_flags &
+					CIFS_MOUNT_MAP_SPECIAL_CHR);
+		cFYI(1, ("SetEOF by path (setattrs) rc = %d", rc));
+		if ((rc == -EINVAL) || (rc == -EOPNOTSUPP)) {
+			__u16 netfid;
+			int oplock = 0;
+
+			rc = SMBLegacyOpen(xid, pTcon, full_path,
+				FILE_OPEN, GENERIC_WRITE,
+				CREATE_NOT_DIR, &netfid, &oplock, NULL,
+				cifs_sb->local_nls,
+				cifs_sb->mnt_cifs_flags &
+					CIFS_MOUNT_MAP_SPECIAL_CHR);
+			if (rc == 0) {
+				unsigned int bytes_written;
+				rc = CIFSSMBWrite(xid, pTcon, netfid, 0,
+						  attrs->ia_size,
+						  &bytes_written, NULL,
+						  NULL, 1);
+				cFYI(1, ("wrt seteof rc %d", rc));
+				CIFSSMBClose(xid, pTcon, netfid);
+			}
+		}
+	}
+
+	if (rc == 0) {
+		rc = cifs_vmtruncate(inode, attrs->ia_size);
+		cifs_truncate_page(inode->i_mapping, inode->i_size);
+	}
+
+	return rc;
+}
+
+static int
+cifs_set_file_info(struct inode *inode, struct iattr *attrs, int xid,
+		    char *full_path, __u32 dosattr)
+{
+	int rc;
+	int oplock = 0;
+	__u16 netfid;
+	__u32 netpid;
+	bool set_time = false;
+	struct cifsFileInfo *open_file;
+	struct cifsInodeInfo *cifsInode = CIFS_I(inode);
+	struct cifs_sb_info *cifs_sb = CIFS_SB(inode->i_sb);
+	struct cifsTconInfo *pTcon = cifs_sb->tcon;
+	FILE_BASIC_INFO	info_buf;
+
+	if (attrs->ia_valid & ATTR_ATIME) {
+		set_time = true;
+		info_buf.LastAccessTime =
+			cpu_to_le64(cifs_UnixTimeToNT(attrs->ia_atime));
+	} else
+		info_buf.LastAccessTime = 0;
+
+	if (attrs->ia_valid & ATTR_MTIME) {
+		set_time = true;
+		info_buf.LastWriteTime =
+		    cpu_to_le64(cifs_UnixTimeToNT(attrs->ia_mtime));
+	} else
+		info_buf.LastWriteTime = 0;
+
+	/*
+	 * Samba throws this field away, but windows may actually use it.
+	 * Do not set ctime unless other time stamps are changed explicitly
+	 * (i.e. by utimes()) since we would then have a mix of client and
+	 * server times.
+	 */
+	if (set_time && (attrs->ia_valid & ATTR_CTIME)) {
+		cFYI(1, ("CIFS - CTIME changed"));
+		info_buf.ChangeTime =
+		    cpu_to_le64(cifs_UnixTimeToNT(attrs->ia_ctime));
+	} else
+		info_buf.ChangeTime = 0;
+
+	info_buf.CreationTime = 0;	/* don't change */
+	info_buf.Attributes = cpu_to_le32(dosattr);
+
+	/*
+	 * If the file is already open for write, just use that fileid
+	 */
+	open_file = find_writable_file(cifsInode);
+	if (open_file) {
+		netfid = open_file->netfid;
+		netpid = open_file->pid;
+		goto set_via_filehandle;
+	}
+
+	/*
+	 * NT4 apparently returns success on this call, but it doesn't
+	 * really work.
+	 */
+	if (!(pTcon->ses->flags & CIFS_SES_NT4)) {
+		rc = CIFSSMBSetPathInfo(xid, pTcon, full_path,
+				     &info_buf, cifs_sb->local_nls,
+				     cifs_sb->mnt_cifs_flags &
+					CIFS_MOUNT_MAP_SPECIAL_CHR);
+		if (rc != -EOPNOTSUPP && rc != -EINVAL)
+			goto out;
+	}
+
+	cFYI(1, ("calling SetFileInfo since SetPathInfo for "
+		 "times not supported by this server"));
+	rc = CIFSSMBOpen(xid, pTcon, full_path, FILE_OPEN,
+			 SYNCHRONIZE | FILE_WRITE_ATTRIBUTES,
+			 CREATE_NOT_DIR, &netfid, &oplock,
+			 NULL, cifs_sb->local_nls,
+			 cifs_sb->mnt_cifs_flags &
+				CIFS_MOUNT_MAP_SPECIAL_CHR);
+
+	if (rc != 0) {
+		if (rc == -EIO)
+			rc = -EINVAL;
+		goto out;
+	}
+
+	netpid = current->tgid;
+
+set_via_filehandle:
+	rc = CIFSSMBSetFileInfo(xid, pTcon, &info_buf, netfid, netpid);
+	if (open_file == NULL)
+		CIFSSMBClose(xid, pTcon, netfid);
+	else
+		atomic_dec(&open_file->wrtPending);
+out:
+	return rc;
+}
+
+static int
+cifs_setattr_unix(struct dentry *direntry, struct iattr *attrs)
+{
+	int rc;
 	int xid;
-	struct cifs_sb_info *cifs_sb;
-	struct cifsTconInfo *pTcon;
 	char *full_path = NULL;
-	int rc = -EACCES;
-	struct cifsFileInfo *open_file = NULL;
-	FILE_BASIC_INFO time_buf;
-	bool set_time = false;
-	bool set_dosattr = false;
-	__u64 mode = 0xFFFFFFFFFFFFFFFFULL;
-	__u64 uid = 0xFFFFFFFFFFFFFFFFULL;
-	__u64 gid = 0xFFFFFFFFFFFFFFFFULL;
-	struct cifsInodeInfo *cifsInode;
 	struct inode *inode = direntry->d_inode;
+	struct cifsInodeInfo *cifsInode = CIFS_I(inode);
+	struct cifs_sb_info *cifs_sb = CIFS_SB(inode->i_sb);
+	struct cifsTconInfo *pTcon = cifs_sb->tcon;
+	struct cifs_unix_set_info_args *args = NULL;
+
+	cFYI(1, ("setattr_unix on file %s attrs->ia_valid=0x%x",
+		 direntry->d_name.name, attrs->ia_valid));
+
+	xid = GetXid();
+
+	if ((cifs_sb->mnt_cifs_flags & CIFS_MOUNT_NO_PERM) == 0) {
+		/* check if we have permission to change attrs */
+		rc = inode_change_ok(inode, attrs);
+		if (rc < 0)
+			goto out;
+		else
+			rc = 0;
+	}
+
+	full_path = build_path_from_dentry(direntry);
+	if (full_path == NULL) {
+		rc = -ENOMEM;
+		goto out;
+	}
+
+	if ((attrs->ia_valid & ATTR_MTIME) || (attrs->ia_valid & ATTR_SIZE)) {
+		/*
+		   Flush data before changing file size or changing the last
+		   write time of the file on the server. If the
+		   flush returns error, store it to report later and continue.
+		   BB: This should be smarter. Why bother flushing pages that
+		   will be truncated anyway? Also, should we error out here if
+		   the flush returns error?
+		 */
+		rc = filemap_write_and_wait(inode->i_mapping);
+		if (rc != 0) {
+			cifsInode->write_behind_rc = rc;
+			rc = 0;
+		}
+	}
+
+	if (attrs->ia_valid & ATTR_SIZE) {
+		rc = cifs_set_file_size(inode, attrs, xid, full_path);
+		if (rc != 0)
+			goto out;
+	}
+
+	/* skip mode change if it's just for clearing setuid/setgid */
+	if (attrs->ia_valid & (ATTR_KILL_SUID|ATTR_KILL_SGID))
+		attrs->ia_valid &= ~ATTR_MODE;
+
+	args = kmalloc(sizeof(*args), GFP_KERNEL);
+	if (args == NULL) {
+		rc = -ENOMEM;
+		goto out;
+	}
+
+	/* set up the struct */
+	if (attrs->ia_valid & ATTR_MODE)
+		args->mode = attrs->ia_mode;
+	else
+		args->mode = NO_CHANGE_64;
+
+	if (attrs->ia_valid & ATTR_UID)
+		args->uid = attrs->ia_uid;
+	else
+		args->uid = NO_CHANGE_64;
+
+	if (attrs->ia_valid & ATTR_GID)
+		args->gid = attrs->ia_gid;
+	else
+		args->gid = NO_CHANGE_64;
+
+	if (attrs->ia_valid & ATTR_ATIME)
+		args->atime = cifs_UnixTimeToNT(attrs->ia_atime);
+	else
+		args->atime = NO_CHANGE_64;
+
+	if (attrs->ia_valid & ATTR_MTIME)
+		args->mtime = cifs_UnixTimeToNT(attrs->ia_mtime);
+	else
+		args->mtime = NO_CHANGE_64;
+
+	if (attrs->ia_valid & ATTR_CTIME)
+		args->ctime = cifs_UnixTimeToNT(attrs->ia_ctime);
+	else
+		args->ctime = NO_CHANGE_64;
+
+	args->device = 0;
+	rc = CIFSSMBUnixSetInfo(xid, pTcon, full_path, args,
+				cifs_sb->local_nls,
+				cifs_sb->mnt_cifs_flags &
+				CIFS_MOUNT_MAP_SPECIAL_CHR);
+
+	if (!rc)
+		rc = inode_setattr(inode, attrs);
+out:
+	kfree(args);
+	kfree(full_path);
+	FreeXid(xid);
+	return rc;
+}
+
+static int
+cifs_setattr_nounix(struct dentry *direntry, struct iattr *attrs)
+{
+	int xid;
+	struct inode *inode = direntry->d_inode;
+	struct cifs_sb_info *cifs_sb = CIFS_SB(inode->i_sb);
+	struct cifsInodeInfo *cifsInode = CIFS_I(inode);
+	char *full_path = NULL;
+	int rc = -EACCES;
+	__u32 dosattr = 0;
+	__u64 mode = NO_CHANGE_64;
 
 	xid = GetXid();
 
 	cFYI(1, ("setattr on file %s attrs->iavalid 0x%x",
 		 direntry->d_name.name, attrs->ia_valid));
 
-	cifs_sb = CIFS_SB(inode->i_sb);
-	pTcon = cifs_sb->tcon;
-
 	if ((cifs_sb->mnt_cifs_flags & CIFS_MOUNT_NO_PERM) == 0) {
 		/* check if we have permission to change attrs */
 		rc = inode_change_ok(inode, attrs);
@@ -1453,7 +1743,6 @@ int cifs_setattr(struct dentry *direntry, struct iattr *attrs)
 		FreeXid(xid);
 		return -ENOMEM;
 	}
-	cifsInode = CIFS_I(inode);
 
 	if ((attrs->ia_valid & ATTR_MTIME) || (attrs->ia_valid & ATTR_SIZE)) {
 		/*
@@ -1472,78 +1761,8 @@ int cifs_setattr(struct dentry *direntry, struct iattr *attrs)
 	}
 
 	if (attrs->ia_valid & ATTR_SIZE) {
-		/* To avoid spurious oplock breaks from server, in the case of
-		   inodes that we already have open, avoid doing path based
-		   setting of file size if we can do it by handle.
-		   This keeps our caching token (oplock) and avoids timeouts
-		   when the local oplock break takes longer to flush
-		   writebehind data than the SMB timeout for the SetPathInfo
-		   request would allow */
-
-		open_file = find_writable_file(cifsInode);
-		if (open_file) {
-			__u16 nfid = open_file->netfid;
-			__u32 npid = open_file->pid;
-			rc = CIFSSMBSetFileSize(xid, pTcon, attrs->ia_size,
-						nfid, npid, false);
-			atomic_dec(&open_file->wrtPending);
-			cFYI(1, ("SetFSize for attrs rc = %d", rc));
-			if ((rc == -EINVAL) || (rc == -EOPNOTSUPP)) {
-				unsigned int bytes_written;
-				rc = CIFSSMBWrite(xid, pTcon,
-						  nfid, 0, attrs->ia_size,
-						  &bytes_written, NULL, NULL,
-						  1 /* 45 seconds */);
-				cFYI(1, ("Wrt seteof rc %d", rc));
-			}
-		} else
-			rc = -EINVAL;
-
-		if (rc != 0) {
-			/* Set file size by pathname rather than by handle
-			   either because no valid, writeable file handle for
-			   it was found or because there was an error setting
-			   it by handle */
-			rc = CIFSSMBSetEOF(xid, pTcon, full_path,
-					   attrs->ia_size, false,
-					   cifs_sb->local_nls,
-					   cifs_sb->mnt_cifs_flags &
-						CIFS_MOUNT_MAP_SPECIAL_CHR);
-			cFYI(1, ("SetEOF by path (setattrs) rc = %d", rc));
-			if ((rc == -EINVAL) || (rc == -EOPNOTSUPP)) {
-				__u16 netfid;
-				int oplock = 0;
-
-				rc = SMBLegacyOpen(xid, pTcon, full_path,
-					FILE_OPEN, GENERIC_WRITE,
-					CREATE_NOT_DIR, &netfid, &oplock,
-					NULL, cifs_sb->local_nls,
-					cifs_sb->mnt_cifs_flags &
-						CIFS_MOUNT_MAP_SPECIAL_CHR);
-				if (rc == 0) {
-					unsigned int bytes_written;
-					rc = CIFSSMBWrite(xid, pTcon,
-							netfid, 0,
-							attrs->ia_size,
-							&bytes_written, NULL,
-							NULL, 1 /* 45 sec */);
-					cFYI(1, ("wrt seteof rc %d", rc));
-					CIFSSMBClose(xid, pTcon, netfid);
-				}
-
-			}
-		}
-
-		/* Server is ok setting allocation size implicitly - no need
-		   to call:
-		CIFSSMBSetEOF(xid, pTcon, full_path, attrs->ia_size, true,
-			 cifs_sb->local_nls);
-		   */
-
-		if (rc == 0) {
-			rc = cifs_vmtruncate(inode, attrs->ia_size);
-			cifs_truncate_page(inode->i_mapping, inode->i_size);
-		} else
+		rc = cifs_set_file_size(inode, attrs, xid, full_path);
+		if (rc != 0)
 			goto cifs_setattr_exit;
 	}
 
@@ -1554,21 +1773,8 @@ int cifs_setattr(struct dentry *direntry, struct iattr *attrs)
 	 * CIFSACL support + proper Windows to Unix idmapping, we may be
 	 * able to support this in the future.
 	 */
-	if (!pTcon->unix_ext &&
-	    !(cifs_sb->mnt_cifs_flags & CIFS_MOUNT_SET_UID)) {
+	if (!(cifs_sb->mnt_cifs_flags & CIFS_MOUNT_SET_UID))
 		attrs->ia_valid &= ~(ATTR_UID | ATTR_GID);
-	} else {
-		if (attrs->ia_valid & ATTR_UID) {
-			cFYI(1, ("UID changed to %d", attrs->ia_uid));
-			uid = attrs->ia_uid;
-		}
-		if (attrs->ia_valid & ATTR_GID) {
-			cFYI(1, ("GID changed to %d", attrs->ia_gid));
-			gid = attrs->ia_gid;
-		}
-	}
-
-	time_buf.Attributes = 0;
 
 	/* skip mode change if it's just for clearing setuid/setgid */
 	if (attrs->ia_valid & (ATTR_KILL_SUID|ATTR_KILL_SGID))
@@ -1579,13 +1785,7 @@ int cifs_setattr(struct dentry *direntry, struct iattr *attrs)
 		mode = attrs->ia_mode;
 	}
 
-	if ((pTcon->unix_ext)
-	    && (attrs->ia_valid & (ATTR_MODE | ATTR_GID | ATTR_UID)))
-		rc = CIFSSMBUnixSetPerms(xid, pTcon, full_path, mode, uid, gid,
-					 0 /* dev_t */, cifs_sb->local_nls,
-					 cifs_sb->mnt_cifs_flags &
-						CIFS_MOUNT_MAP_SPECIAL_CHR);
-	else if (attrs->ia_valid & ATTR_MODE) {
+	if (attrs->ia_valid & ATTR_MODE) {
 		rc = 0;
 #ifdef CONFIG_CIFS_EXPERIMENTAL
 		if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_CIFS_ACL)
@@ -1594,24 +1794,19 @@ int cifs_setattr(struct dentry *direntry, struct iattr *attrs)
 #endif
 		if (((mode & S_IWUGO) == 0) &&
 		    (cifsInode->cifsAttrs & ATTR_READONLY) == 0) {
-			set_dosattr = true;
-			time_buf.Attributes = cpu_to_le32(cifsInode->cifsAttrs |
-							  ATTR_READONLY);
+
+			dosattr = cifsInode->cifsAttrs | ATTR_READONLY;
+
 			/* fix up mode if we're not using dynperm */
 			if ((cifs_sb->mnt_cifs_flags & CIFS_MOUNT_DYNPERM) == 0)
 				attrs->ia_mode = inode->i_mode & ~S_IWUGO;
 		} else if ((mode & S_IWUGO) &&
 			   (cifsInode->cifsAttrs & ATTR_READONLY)) {
-			/* If file is readonly on server, we would
-			not be able to write to it - so if any write
-			bit is enabled for user or group or other we
-			need to at least try to remove r/o dos attr */
-			set_dosattr = true;
-			time_buf.Attributes = cpu_to_le32(cifsInode->cifsAttrs &
-					    (~ATTR_READONLY));
-			/* Windows ignores set to zero */
-			if (time_buf.Attributes == 0)
-				time_buf.Attributes |= cpu_to_le32(ATTR_NORMAL);
+
+			dosattr = cifsInode->cifsAttrs & ~ATTR_READONLY;
+			/* Attributes of 0 are ignored */
+			if (dosattr == 0)
+				dosattr |= ATTR_NORMAL;
 
 			/* reset local inode permissions to normal */
 			if (!(cifs_sb->mnt_cifs_flags & CIFS_MOUNT_DYNPERM)) {
@@ -1629,82 +1824,18 @@ int cifs_setattr(struct dentry *direntry, struct iattr *attrs)
 		}
 	}
 
-	if (attrs->ia_valid & ATTR_ATIME) {
-		set_time = true;
-		time_buf.LastAccessTime =
-		    cpu_to_le64(cifs_UnixTimeToNT(attrs->ia_atime));
-	} else
-		time_buf.LastAccessTime = 0;
-
-	if (attrs->ia_valid & ATTR_MTIME) {
-		set_time = true;
-		time_buf.LastWriteTime =
-		    cpu_to_le64(cifs_UnixTimeToNT(attrs->ia_mtime));
-	} else
-		time_buf.LastWriteTime = 0;
-	/* Do not set ctime explicitly unless other time
-	   stamps are changed explicitly (i.e. by utime()
-	   since we would then have a mix of client and
-	   server times */
-
-	if (set_time && (attrs->ia_valid & ATTR_CTIME)) {
-		set_time = true;
-		/* Although Samba throws this field away
-		it may be useful to Windows - but we do
-		not want to set ctime unless some other
-		timestamp is changing */
-		cFYI(1, ("CIFS - CTIME changed"));
-		time_buf.ChangeTime =
-		    cpu_to_le64(cifs_UnixTimeToNT(attrs->ia_ctime));
-	} else
-		time_buf.ChangeTime = 0;
-
-	if (set_time || set_dosattr) {
-		time_buf.CreationTime = 0;	/* do not change */
-		/* In the future we should experiment - try setting timestamps
-		   via Handle (SetFileInfo) instead of by path */
-		if (!(pTcon->ses->flags & CIFS_SES_NT4))
-			rc = CIFSSMBSetTimes(xid, pTcon, full_path, &time_buf,
-					     cifs_sb->local_nls,
-					     cifs_sb->mnt_cifs_flags &
-						CIFS_MOUNT_MAP_SPECIAL_CHR);
-		else
-			rc = -EOPNOTSUPP;
+	if (attrs->ia_valid & (ATTR_MTIME|ATTR_ATIME|ATTR_CTIME) ||
+	    ((attrs->ia_valid & ATTR_MODE) && dosattr)) {
+		rc = cifs_set_file_info(inode, attrs, xid, full_path, dosattr);
+		/* BB: check for rc = -EOPNOTSUPP and switch to legacy mode */
 
-		if (rc == -EOPNOTSUPP) {
-			int oplock = 0;
-			__u16 netfid;
-
-			cFYI(1, ("calling SetFileInfo since SetPathInfo for "
-				 "times not supported by this server"));
-			/* BB we could scan to see if we already have it open
-			   and pass in pid of opener to function */
-			rc = CIFSSMBOpen(xid, pTcon, full_path, FILE_OPEN,
-					 SYNCHRONIZE | FILE_WRITE_ATTRIBUTES,
-					 CREATE_NOT_DIR, &netfid, &oplock,
-					 NULL, cifs_sb->local_nls,
-					 cifs_sb->mnt_cifs_flags &
-						CIFS_MOUNT_MAP_SPECIAL_CHR);
-			if (rc == 0) {
-				rc = CIFSSMBSetFileTimes(xid, pTcon, &time_buf,
-							 netfid);
-				CIFSSMBClose(xid, pTcon, netfid);
-			} else {
-			/* BB For even older servers we could convert time_buf
-			   into old DOS style which uses two second
-			   granularity */
-
-			/* rc = CIFSSMBSetTimesLegacy(xid, pTcon, full_path,
-					&time_buf, cifs_sb->local_nls); */
-			}
-		}
 		/* Even if error on time set, no sense failing the call if
 		the server would set the time to a reasonable value anyway,
 		and this check ensures that we are not being called from
 		sys_utimes in which case we ought to fail the call back to
 		the user when the server rejects the call */
 		if ((rc) && (attrs->ia_valid &
-			 (ATTR_MODE | ATTR_GID | ATTR_UID | ATTR_SIZE)))
+				(ATTR_MODE | ATTR_GID | ATTR_UID | ATTR_SIZE)))
 			rc = 0;
 	}
 
@@ -1718,6 +1849,21 @@ cifs_setattr_exit:
 	return rc;
 }
 
+int
+cifs_setattr(struct dentry *direntry, struct iattr *attrs)
+{
+	struct inode *inode = direntry->d_inode;
+	struct cifs_sb_info *cifs_sb = CIFS_SB(inode->i_sb);
+	struct cifsTconInfo *pTcon = cifs_sb->tcon;
+
+	if (pTcon->unix_ext)
+		return cifs_setattr_unix(direntry, attrs);
+
+	return cifs_setattr_nounix(direntry, attrs);
+
+	/* BB: add cifs_setattr_legacy for really old servers */
+}
+
 #if 0
 void cifs_delete_inode(struct inode *inode)
 {
diff --git a/fs/cifs/readdir.c b/fs/cifs/readdir.c
index 83f306954883..5f40ed3473f5 100644
--- a/fs/cifs/readdir.c
+++ b/fs/cifs/readdir.c
@@ -690,6 +690,7 @@ static int find_cifs_entry(const int xid, struct cifsTconInfo *pTcon,
 			else
 				cifs_buf_release(cifsFile->srch_inf.
 						ntwrk_buf_start);
+			cifsFile->srch_inf.ntwrk_buf_start = NULL;
 		}
 		rc = initiate_cifs_search(xid, file);
 		if (rc) {
diff --git a/fs/cifs/sess.c b/fs/cifs/sess.c
index ed150efbe27c..252fdc0567f1 100644
--- a/fs/cifs/sess.c
+++ b/fs/cifs/sess.c
@@ -409,6 +409,8 @@ CIFS_SessSetup(unsigned int xid, struct cifsSesInfo *ses, int first_time,
 #ifdef CONFIG_CIFS_WEAK_PW_HASH
 		char lnm_session_key[CIFS_SESS_KEY_SIZE];
 
+		pSMB->req.hdr.Flags2 &= ~SMBFLG2_UNICODE;
+
 		/* no capabilities flags in old lanman negotiation */
 
 		pSMB->old_req.PasswordLength = cpu_to_le16(CIFS_SESS_KEY_SIZE);
@@ -505,7 +507,7 @@ CIFS_SessSetup(unsigned int xid, struct cifsSesInfo *ses, int first_time,
 			unicode_ssetup_strings(&bcc_ptr, ses, nls_cp);
 		} else
 			ascii_ssetup_strings(&bcc_ptr, ses, nls_cp);
-	} else if (type == Kerberos) {
+	} else if (type == Kerberos || type == MSKerberos) {
 #ifdef CONFIG_CIFS_UPCALL
 		struct cifs_spnego_msg *msg;
 		spnego_key = cifs_get_spnego_key(ses);
@@ -516,6 +518,15 @@ CIFS_SessSetup(unsigned int xid, struct cifsSesInfo *ses, int first_time,
 		}
 
 		msg = spnego_key->payload.data;
+		/* check version field to make sure that cifs.upcall is
+		   sending us a response in an expected form */
+		if (msg->version != CIFS_SPNEGO_UPCALL_VERSION) {
+			cERROR(1, ("incorrect version of cifs.upcall (expected"
+				   " %d but got %d)",
+				   CIFS_SPNEGO_UPCALL_VERSION, msg->version));
+			rc = -EKEYREJECTED;
+			goto ssetup_exit;
+		}
 		/* bail out if key is too long */
 		if (msg->sesskey_len >
 		    sizeof(ses->server->mac_signing_key.data.krb5)) {
diff --git a/fs/cifs/transport.c b/fs/cifs/transport.c
index 000ac509c98a..e286db9f5ee2 100644
--- a/fs/cifs/transport.c
+++ b/fs/cifs/transport.c
@@ -265,6 +265,7 @@ smb_send2(struct socket *ssocket, struct kvec *iov, int n_vec,
 	cFYI(1, ("Sending smb:  total_len %d", total_len));
 	dump_smb(smb_buffer, len);
 
+	i = 0;
 	while (total_len) {
 		rc = kernel_sendmsg(ssocket, &smb_msg, &iov[first_vec],
 				    n_vec - first_vec, total_len);
diff --git a/fs/coda/coda_linux.c b/fs/coda/coda_linux.c
index e1c854890f94..bf4a3fd3c8e3 100644
--- a/fs/coda/coda_linux.c
+++ b/fs/coda/coda_linux.c
@@ -28,11 +28,9 @@ int coda_fake_statfs;
 char * coda_f2s(struct CodaFid *f)
 {
 	static char s[60];
-#ifdef CONFIG_CODA_FS_OLD_API
- 	sprintf(s, "(%08x.%08x.%08x)", f->opaque[0], f->opaque[1], f->opaque[2]);
-#else
+
  	sprintf(s, "(%08x.%08x.%08x.%08x)", f->opaque[0], f->opaque[1], f->opaque[2], f->opaque[3]);
-#endif
+
 	return s;
 }
 
diff --git a/fs/coda/dir.c b/fs/coda/dir.c
index 3d2580e00a3e..c5916228243c 100644
--- a/fs/coda/dir.c
+++ b/fs/coda/dir.c
@@ -137,9 +137,11 @@ exit:
 }
 
 
-int coda_permission(struct inode *inode, int mask, struct nameidata *nd)
+int coda_permission(struct inode *inode, int mask)
 {
         int error = 0;
+
+	mask &= MAY_READ | MAY_WRITE | MAY_EXEC;
  
 	if (!mask)
 		return 0; 
diff --git a/fs/coda/inode.c b/fs/coda/inode.c
index 2f58dfc70083..830f51abb971 100644
--- a/fs/coda/inode.c
+++ b/fs/coda/inode.c
@@ -58,7 +58,7 @@ static void coda_destroy_inode(struct inode *inode)
 	kmem_cache_free(coda_inode_cachep, ITOC(inode));
 }
 
-static void init_once(struct kmem_cache * cachep, void *foo)
+static void init_once(void *foo)
 {
 	struct coda_inode_info *ei = (struct coda_inode_info *) foo;
 
diff --git a/fs/coda/pioctl.c b/fs/coda/pioctl.c
index c21a1f552a63..c51365422aa8 100644
--- a/fs/coda/pioctl.c
+++ b/fs/coda/pioctl.c
@@ -24,8 +24,7 @@
 #include <linux/coda_psdev.h>
 
 /* pioctl ops */
-static int coda_ioctl_permission(struct inode *inode, int mask,
-				 struct nameidata *nd);
+static int coda_ioctl_permission(struct inode *inode, int mask);
 static int coda_pioctl(struct inode * inode, struct file * filp, 
                        unsigned int cmd, unsigned long user_data);
 
@@ -42,8 +41,7 @@ const struct file_operations coda_ioctl_operations = {
 };
 
 /* the coda pioctl inode ops */
-static int coda_ioctl_permission(struct inode *inode, int mask,
-				 struct nameidata *nd)
+static int coda_ioctl_permission(struct inode *inode, int mask)
 {
         return 0;
 }
@@ -51,7 +49,7 @@ static int coda_ioctl_permission(struct inode *inode, int mask,
 static int coda_pioctl(struct inode * inode, struct file * filp, 
                        unsigned int cmd, unsigned long user_data)
 {
-	struct nameidata nd;
+	struct path path;
         int error;
 	struct PioctlData data;
         struct inode *target_inode = NULL;
@@ -66,21 +64,21 @@ static int coda_pioctl(struct inode * inode, struct file * filp,
          * Look up the pathname. Note that the pathname is in 
          * user memory, and namei takes care of this
          */
-        if ( data.follow ) {
-                error = user_path_walk(data.path, &nd);
+        if (data.follow) {
+                error = user_path(data.path, &path);
 	} else {
-	        error = user_path_walk_link(data.path, &nd);
+	        error = user_lpath(data.path, &path);
 	}
 		
 	if ( error ) {
 		return error;
         } else {
-		target_inode = nd.path.dentry->d_inode;
+		target_inode = path.dentry->d_inode;
 	}
 	
 	/* return if it is not a Coda inode */
 	if ( target_inode->i_sb != inode->i_sb ) {
-		path_put(&nd.path);
+		path_put(&path);
 	        return  -EINVAL;
 	}
 
@@ -89,7 +87,7 @@ static int coda_pioctl(struct inode * inode, struct file * filp,
 
 	error = venus_pioctl(inode->i_sb, &(cnp->c_fid), cmd, &data);
 
-	path_put(&nd.path);
+	path_put(&path);
         return error;
 }
 
diff --git a/fs/coda/psdev.c b/fs/coda/psdev.c
index 40c36f7352a6..0d9b80ec689c 100644
--- a/fs/coda/psdev.c
+++ b/fs/coda/psdev.c
@@ -378,11 +378,7 @@ MODULE_AUTHOR("Jan Harkes, Peter J. Braam");
 MODULE_DESCRIPTION("Coda Distributed File System VFS interface");
 MODULE_ALIAS_CHARDEV_MAJOR(CODA_PSDEV_MAJOR);
 MODULE_LICENSE("GPL");
-#ifdef CONFIG_CODA_FS_OLD_API
-MODULE_VERSION("5.3.21");
-#else
 MODULE_VERSION("6.6");
-#endif
 
 static int __init init_coda(void)
 {
diff --git a/fs/coda/upcall.c b/fs/coda/upcall.c
index 359e531094dd..ce432bca95d1 100644
--- a/fs/coda/upcall.c
+++ b/fs/coda/upcall.c
@@ -52,12 +52,8 @@ static void *alloc_upcall(int opcode, int size)
         inp->ih.opcode = opcode;
 	inp->ih.pid = current->pid;
 	inp->ih.pgid = task_pgrp_nr(current);
-#ifdef CONFIG_CODA_FS_OLD_API
-	memset(&inp->ih.cred, 0, sizeof(struct coda_cred));
-	inp->ih.cred.cr_fsuid = current->fsuid;
-#else
 	inp->ih.uid = current->fsuid;
-#endif
+
 	return (void*)inp;
 }
 
@@ -166,20 +162,11 @@ int venus_close(struct super_block *sb, struct CodaFid *fid, int flags,
 	union inputArgs *inp;
 	union outputArgs *outp;
 	int insize, outsize, error;
-#ifdef CONFIG_CODA_FS_OLD_API
-	struct coda_cred cred = { 0, };
-	cred.cr_fsuid = uid;
-#endif
 	
 	insize = SIZE(release);
 	UPARG(CODA_CLOSE);
 	
-#ifdef CONFIG_CODA_FS_OLD_API
-	memcpy(&(inp->ih.cred), &cred, sizeof(cred));
-#else
 	inp->ih.uid = uid;
-#endif
-	
         inp->coda_close.VFid = *fid;
         inp->coda_close.flags = flags;
 
diff --git a/fs/compat.c b/fs/compat.c
index 106eba28ec5a..075d0509970d 100644
--- a/fs/compat.c
+++ b/fs/compat.c
@@ -234,18 +234,18 @@ static int put_compat_statfs(struct compat_statfs __user *ubuf, struct kstatfs *
  * The following statfs calls are copies of code from fs/open.c and
  * should be checked against those from time to time
  */
-asmlinkage long compat_sys_statfs(const char __user *path, struct compat_statfs __user *buf)
+asmlinkage long compat_sys_statfs(const char __user *pathname, struct compat_statfs __user *buf)
 {
-	struct nameidata nd;
+	struct path path;
 	int error;
 
-	error = user_path_walk(path, &nd);
+	error = user_path(pathname, &path);
 	if (!error) {
 		struct kstatfs tmp;
-		error = vfs_statfs(nd.path.dentry, &tmp);
+		error = vfs_statfs(path.dentry, &tmp);
 		if (!error)
 			error = put_compat_statfs(buf, &tmp);
-		path_put(&nd.path);
+		path_put(&path);
 	}
 	return error;
 }
@@ -299,21 +299,21 @@ static int put_compat_statfs64(struct compat_statfs64 __user *ubuf, struct kstat
 	return 0;
 }
 
-asmlinkage long compat_sys_statfs64(const char __user *path, compat_size_t sz, struct compat_statfs64 __user *buf)
+asmlinkage long compat_sys_statfs64(const char __user *pathname, compat_size_t sz, struct compat_statfs64 __user *buf)
 {
-	struct nameidata nd;
+	struct path path;
 	int error;
 
 	if (sz != sizeof(*buf))
 		return -EINVAL;
 
-	error = user_path_walk(path, &nd);
+	error = user_path(pathname, &path);
 	if (!error) {
 		struct kstatfs tmp;
-		error = vfs_statfs(nd.path.dentry, &tmp);
+		error = vfs_statfs(path.dentry, &tmp);
 		if (!error)
 			error = put_compat_statfs64(buf, &tmp);
-		path_put(&nd.path);
+		path_put(&path);
 	}
 	return error;
 }
@@ -792,8 +792,10 @@ static int compat_fillonedir(void *__buf, const char *name, int namlen,
 	if (buf->result)
 		return -EINVAL;
 	d_ino = ino;
-	if (sizeof(d_ino) < sizeof(ino) && d_ino != ino)
+	if (sizeof(d_ino) < sizeof(ino) && d_ino != ino) {
+		buf->result = -EOVERFLOW;
 		return -EOVERFLOW;
+	}
 	buf->result++;
 	dirent = buf->dirent;
 	if (!access_ok(VERIFY_WRITE, dirent,
@@ -862,8 +864,10 @@ static int compat_filldir(void *__buf, const char *name, int namlen,
 	if (reclen > buf->count)
 		return -EINVAL;
 	d_ino = ino;
-	if (sizeof(d_ino) < sizeof(ino) && d_ino != ino)
+	if (sizeof(d_ino) < sizeof(ino) && d_ino != ino) {
+		buf->error = -EOVERFLOW;
 		return -EOVERFLOW;
+	}
 	dirent = buf->previous;
 	if (dirent) {
 		if (__put_user(offset, &dirent->d_off))
diff --git a/fs/compat_ioctl.c b/fs/compat_ioctl.c
index 18e2c548161d..5235c67e7594 100644
--- a/fs/compat_ioctl.c
+++ b/fs/compat_ioctl.c
@@ -25,7 +25,6 @@
 #include <linux/slab.h>
 #include <linux/raid/md.h>
 #include <linux/kd.h>
-#include <linux/dirent.h>
 #include <linux/route.h>
 #include <linux/in6.h>
 #include <linux/ipv6_route.h>
diff --git a/fs/configfs/configfs_internal.h b/fs/configfs/configfs_internal.h
index da015c12e3ea..762d287123ca 100644
--- a/fs/configfs/configfs_internal.h
+++ b/fs/configfs/configfs_internal.h
@@ -49,8 +49,10 @@ struct configfs_dirent {
 #define CONFIGFS_USET_DEFAULT	0x0080
 #define CONFIGFS_USET_DROPPING	0x0100
 #define CONFIGFS_USET_IN_MKDIR	0x0200
+#define CONFIGFS_USET_CREATING	0x0400
 #define CONFIGFS_NOT_PINNED	(CONFIGFS_ITEM_ATTR)
 
+extern struct mutex configfs_symlink_mutex;
 extern spinlock_t configfs_dirent_lock;
 
 extern struct vfsmount * configfs_mount;
@@ -66,6 +68,7 @@ extern void configfs_inode_exit(void);
 extern int configfs_create_file(struct config_item *, const struct configfs_attribute *);
 extern int configfs_make_dirent(struct configfs_dirent *,
 				struct dentry *, void *, umode_t, int);
+extern int configfs_dirent_is_ready(struct configfs_dirent *);
 
 extern int configfs_add_file(struct dentry *, const struct configfs_attribute *, int);
 extern void configfs_hash_and_remove(struct dentry * dir, const char * name);
diff --git a/fs/configfs/dir.c b/fs/configfs/dir.c
index 179589be063a..8e93341f3e82 100644
--- a/fs/configfs/dir.c
+++ b/fs/configfs/dir.c
@@ -185,7 +185,7 @@ static int create_dir(struct config_item * k, struct dentry * p,
 	error = configfs_dirent_exists(p->d_fsdata, d->d_name.name);
 	if (!error)
 		error = configfs_make_dirent(p->d_fsdata, d, k, mode,
-					     CONFIGFS_DIR);
+					     CONFIGFS_DIR | CONFIGFS_USET_CREATING);
 	if (!error) {
 		error = configfs_create(d, mode, init_dir);
 		if (!error) {
@@ -209,6 +209,9 @@ static int create_dir(struct config_item * k, struct dentry * p,
  *	configfs_create_dir - create a directory for an config_item.
  *	@item:		config_itemwe're creating directory for.
  *	@dentry:	config_item's dentry.
+ *
+ *	Note: user-created entries won't be allowed under this new directory
+ *	until it is validated by configfs_dir_set_ready()
  */
 
 static int configfs_create_dir(struct config_item * item, struct dentry *dentry)
@@ -231,6 +234,44 @@ static int configfs_create_dir(struct config_item * item, struct dentry *dentry)
 	return error;
 }
 
+/*
+ * Allow userspace to create new entries under a new directory created with
+ * configfs_create_dir(), and under all of its chidlren directories recursively.
+ * @sd		configfs_dirent of the new directory to validate
+ *
+ * Caller must hold configfs_dirent_lock.
+ */
+static void configfs_dir_set_ready(struct configfs_dirent *sd)
+{
+	struct configfs_dirent *child_sd;
+
+	sd->s_type &= ~CONFIGFS_USET_CREATING;
+	list_for_each_entry(child_sd, &sd->s_children, s_sibling)
+		if (child_sd->s_type & CONFIGFS_USET_CREATING)
+			configfs_dir_set_ready(child_sd);
+}
+
+/*
+ * Check that a directory does not belong to a directory hierarchy being
+ * attached and not validated yet.
+ * @sd		configfs_dirent of the directory to check
+ *
+ * @return	non-zero iff the directory was validated
+ *
+ * Note: takes configfs_dirent_lock, so the result may change from false to true
+ * in two consecutive calls, but never from true to false.
+ */
+int configfs_dirent_is_ready(struct configfs_dirent *sd)
+{
+	int ret;
+
+	spin_lock(&configfs_dirent_lock);
+	ret = !(sd->s_type & CONFIGFS_USET_CREATING);
+	spin_unlock(&configfs_dirent_lock);
+
+	return ret;
+}
+
 int configfs_create_link(struct configfs_symlink *sl,
 			 struct dentry *parent,
 			 struct dentry *dentry)
@@ -283,6 +324,8 @@ static void remove_dir(struct dentry * d)
  * The only thing special about this is that we remove any files in
  * the directory before we remove the directory, and we've inlined
  * what used to be configfs_rmdir() below, instead of calling separately.
+ *
+ * Caller holds the mutex of the item's inode
  */
 
 static void configfs_remove_dir(struct config_item * item)
@@ -330,7 +373,19 @@ static struct dentry * configfs_lookup(struct inode *dir,
 	struct configfs_dirent * parent_sd = dentry->d_parent->d_fsdata;
 	struct configfs_dirent * sd;
 	int found = 0;
-	int err = 0;
+	int err;
+
+	/*
+	 * Fake invisibility if dir belongs to a group/default groups hierarchy
+	 * being attached
+	 *
+	 * This forbids userspace to read/write attributes of items which may
+	 * not complete their initialization, since the dentries of the
+	 * attributes won't be instantiated.
+	 */
+	err = -ENOENT;
+	if (!configfs_dirent_is_ready(parent_sd))
+		goto out;
 
 	list_for_each_entry(sd, &parent_sd->s_children, s_sibling) {
 		if (sd->s_type & CONFIGFS_NOT_PINNED) {
@@ -353,6 +408,7 @@ static struct dentry * configfs_lookup(struct inode *dir,
 		return simple_lookup(dir, dentry, nd);
 	}
 
+out:
 	return ERR_PTR(err);
 }
 
@@ -370,13 +426,17 @@ static int configfs_detach_prep(struct dentry *dentry, struct mutex **wait_mutex
 	struct configfs_dirent *sd;
 	int ret;
 
+	/* Mark that we're trying to drop the group */
+	parent_sd->s_type |= CONFIGFS_USET_DROPPING;
+
 	ret = -EBUSY;
 	if (!list_empty(&parent_sd->s_links))
 		goto out;
 
 	ret = 0;
 	list_for_each_entry(sd, &parent_sd->s_children, s_sibling) {
-		if (sd->s_type & CONFIGFS_NOT_PINNED)
+		if (!sd->s_element ||
+		    (sd->s_type & CONFIGFS_NOT_PINNED))
 			continue;
 		if (sd->s_type & CONFIGFS_USET_DEFAULT) {
 			/* Abort if racing with mkdir() */
@@ -385,8 +445,6 @@ static int configfs_detach_prep(struct dentry *dentry, struct mutex **wait_mutex
 					*wait_mutex = &sd->s_dentry->d_inode->i_mutex;
 				return -EAGAIN;
 			}
-			/* Mark that we're trying to drop the group */
-			sd->s_type |= CONFIGFS_USET_DROPPING;
 
 			/*
 			 * Yup, recursive.  If there's a problem, blame
@@ -414,12 +472,11 @@ static void configfs_detach_rollback(struct dentry *dentry)
 	struct configfs_dirent *parent_sd = dentry->d_fsdata;
 	struct configfs_dirent *sd;
 
-	list_for_each_entry(sd, &parent_sd->s_children, s_sibling) {
-		if (sd->s_type & CONFIGFS_USET_DEFAULT) {
+	parent_sd->s_type &= ~CONFIGFS_USET_DROPPING;
+
+	list_for_each_entry(sd, &parent_sd->s_children, s_sibling)
+		if (sd->s_type & CONFIGFS_USET_DEFAULT)
 			configfs_detach_rollback(sd->s_dentry);
-			sd->s_type &= ~CONFIGFS_USET_DROPPING;
-		}
-	}
 }
 
 static void detach_attrs(struct config_item * item)
@@ -558,36 +615,21 @@ static int create_default_group(struct config_group *parent_group,
 static int populate_groups(struct config_group *group)
 {
 	struct config_group *new_group;
-	struct dentry *dentry = group->cg_item.ci_dentry;
 	int ret = 0;
 	int i;
 
 	if (group->default_groups) {
-		/*
-		 * FYI, we're faking mkdir here
-		 * I'm not sure we need this semaphore, as we're called
-		 * from our parent's mkdir.  That holds our parent's
-		 * i_mutex, so afaik lookup cannot continue through our
-		 * parent to find us, let alone mess with our tree.
-		 * That said, taking our i_mutex is closer to mkdir
-		 * emulation, and shouldn't hurt.
-		 */
-		mutex_lock_nested(&dentry->d_inode->i_mutex, I_MUTEX_CHILD);
-
 		for (i = 0; group->default_groups[i]; i++) {
 			new_group = group->default_groups[i];
 
 			ret = create_default_group(group, new_group);
-			if (ret)
+			if (ret) {
+				detach_groups(group);
 				break;
+			}
 		}
-
-		mutex_unlock(&dentry->d_inode->i_mutex);
 	}
 
-	if (ret)
-		detach_groups(group);
-
 	return ret;
 }
 
@@ -702,7 +744,15 @@ static int configfs_attach_item(struct config_item *parent_item,
 	if (!ret) {
 		ret = populate_attrs(item);
 		if (ret) {
+			/*
+			 * We are going to remove an inode and its dentry but
+			 * the VFS may already have hit and used them. Thus,
+			 * we must lock them as rmdir() would.
+			 */
+			mutex_lock(&dentry->d_inode->i_mutex);
 			configfs_remove_dir(item);
+			dentry->d_inode->i_flags |= S_DEAD;
+			mutex_unlock(&dentry->d_inode->i_mutex);
 			d_delete(dentry);
 		}
 	}
@@ -710,6 +760,7 @@ static int configfs_attach_item(struct config_item *parent_item,
 	return ret;
 }
 
+/* Caller holds the mutex of the item's inode */
 static void configfs_detach_item(struct config_item *item)
 {
 	detach_attrs(item);
@@ -728,16 +779,30 @@ static int configfs_attach_group(struct config_item *parent_item,
 		sd = dentry->d_fsdata;
 		sd->s_type |= CONFIGFS_USET_DIR;
 
+		/*
+		 * FYI, we're faking mkdir in populate_groups()
+		 * We must lock the group's inode to avoid races with the VFS
+		 * which can already hit the inode and try to add/remove entries
+		 * under it.
+		 *
+		 * We must also lock the inode to remove it safely in case of
+		 * error, as rmdir() would.
+		 */
+		mutex_lock_nested(&dentry->d_inode->i_mutex, I_MUTEX_CHILD);
 		ret = populate_groups(to_config_group(item));
 		if (ret) {
 			configfs_detach_item(item);
-			d_delete(dentry);
+			dentry->d_inode->i_flags |= S_DEAD;
 		}
+		mutex_unlock(&dentry->d_inode->i_mutex);
+		if (ret)
+			d_delete(dentry);
 	}
 
 	return ret;
 }
 
+/* Caller holds the mutex of the group's inode */
 static void configfs_detach_group(struct config_item *item)
 {
 	detach_groups(to_config_group(item));
@@ -1035,7 +1100,7 @@ static int configfs_mkdir(struct inode *dir, struct dentry *dentry, int mode)
 	struct configfs_subsystem *subsys;
 	struct configfs_dirent *sd;
 	struct config_item_type *type;
-	struct module *owner = NULL;
+	struct module *subsys_owner = NULL, *new_item_owner = NULL;
 	char *name;
 
 	if (dentry->d_parent == configfs_sb->s_root) {
@@ -1044,6 +1109,16 @@ static int configfs_mkdir(struct inode *dir, struct dentry *dentry, int mode)
 	}
 
 	sd = dentry->d_parent->d_fsdata;
+
+	/*
+	 * Fake invisibility if dir belongs to a group/default groups hierarchy
+	 * being attached
+	 */
+	if (!configfs_dirent_is_ready(sd)) {
+		ret = -ENOENT;
+		goto out;
+	}
+
 	if (!(sd->s_type & CONFIGFS_USET_DIR)) {
 		ret = -EPERM;
 		goto out;
@@ -1062,10 +1137,25 @@ static int configfs_mkdir(struct inode *dir, struct dentry *dentry, int mode)
 		goto out_put;
 	}
 
+	/*
+	 * The subsystem may belong to a different module than the item
+	 * being created.  We don't want to safely pin the new item but
+	 * fail to pin the subsystem it sits under.
+	 */
+	if (!subsys->su_group.cg_item.ci_type) {
+		ret = -EINVAL;
+		goto out_put;
+	}
+	subsys_owner = subsys->su_group.cg_item.ci_type->ct_owner;
+	if (!try_module_get(subsys_owner)) {
+		ret = -EINVAL;
+		goto out_put;
+	}
+
 	name = kmalloc(dentry->d_name.len + 1, GFP_KERNEL);
 	if (!name) {
 		ret = -ENOMEM;
-		goto out_put;
+		goto out_subsys_put;
 	}
 
 	snprintf(name, dentry->d_name.len + 1, "%s", dentry->d_name.name);
@@ -1094,10 +1184,10 @@ static int configfs_mkdir(struct inode *dir, struct dentry *dentry, int mode)
 	kfree(name);
 	if (ret) {
 		/*
-		 * If item == NULL, then link_obj() was never called.
+		 * If ret != 0, then link_obj() was never called.
 		 * There are no extra references to clean up.
 		 */
-		goto out_put;
+		goto out_subsys_put;
 	}
 
 	/*
@@ -1111,8 +1201,8 @@ static int configfs_mkdir(struct inode *dir, struct dentry *dentry, int mode)
 		goto out_unlink;
 	}
 
-	owner = type->ct_owner;
-	if (!try_module_get(owner)) {
+	new_item_owner = type->ct_owner;
+	if (!try_module_get(new_item_owner)) {
 		ret = -EINVAL;
 		goto out_unlink;
 	}
@@ -1142,6 +1232,8 @@ static int configfs_mkdir(struct inode *dir, struct dentry *dentry, int mode)
 
 	spin_lock(&configfs_dirent_lock);
 	sd->s_type &= ~CONFIGFS_USET_IN_MKDIR;
+	if (!ret)
+		configfs_dir_set_ready(dentry->d_fsdata);
 	spin_unlock(&configfs_dirent_lock);
 
 out_unlink:
@@ -1159,9 +1251,13 @@ out_unlink:
 		mutex_unlock(&subsys->su_mutex);
 
 		if (module_got)
-			module_put(owner);
+			module_put(new_item_owner);
 	}
 
+out_subsys_put:
+	if (ret)
+		module_put(subsys_owner);
+
 out_put:
 	/*
 	 * link_obj()/link_group() took a reference from child->parent,
@@ -1180,7 +1276,7 @@ static int configfs_rmdir(struct inode *dir, struct dentry *dentry)
 	struct config_item *item;
 	struct configfs_subsystem *subsys;
 	struct configfs_dirent *sd;
-	struct module *owner = NULL;
+	struct module *subsys_owner = NULL, *dead_item_owner = NULL;
 	int ret;
 
 	if (dentry->d_parent == configfs_sb->s_root)
@@ -1207,14 +1303,26 @@ static int configfs_rmdir(struct inode *dir, struct dentry *dentry)
 		return -EINVAL;
 	}
 
-	spin_lock(&configfs_dirent_lock);
+	/* configfs_mkdir() shouldn't have allowed this */
+	BUG_ON(!subsys->su_group.cg_item.ci_type);
+	subsys_owner = subsys->su_group.cg_item.ci_type->ct_owner;
+
+	/*
+	 * Ensure that no racing symlink() will make detach_prep() fail while
+	 * the new link is temporarily attached
+	 */
 	do {
 		struct mutex *wait_mutex;
 
+		mutex_lock(&configfs_symlink_mutex);
+		spin_lock(&configfs_dirent_lock);
 		ret = configfs_detach_prep(dentry, &wait_mutex);
-		if (ret) {
+		if (ret)
 			configfs_detach_rollback(dentry);
-			spin_unlock(&configfs_dirent_lock);
+		spin_unlock(&configfs_dirent_lock);
+		mutex_unlock(&configfs_symlink_mutex);
+
+		if (ret) {
 			if (ret != -EAGAIN) {
 				config_item_put(parent_item);
 				return ret;
@@ -1223,11 +1331,8 @@ static int configfs_rmdir(struct inode *dir, struct dentry *dentry)
 			/* Wait until the racing operation terminates */
 			mutex_lock(wait_mutex);
 			mutex_unlock(wait_mutex);
-
-			spin_lock(&configfs_dirent_lock);
 		}
 	} while (ret == -EAGAIN);
-	spin_unlock(&configfs_dirent_lock);
 
 	/* Get a working ref for the duration of this function */
 	item = configfs_get_config_item(dentry);
@@ -1236,7 +1341,7 @@ static int configfs_rmdir(struct inode *dir, struct dentry *dentry)
 	config_item_put(parent_item);
 
 	if (item->ci_type)
-		owner = item->ci_type->ct_owner;
+		dead_item_owner = item->ci_type->ct_owner;
 
 	if (sd->s_type & CONFIGFS_USET_DIR) {
 		configfs_detach_group(item);
@@ -1258,7 +1363,8 @@ static int configfs_rmdir(struct inode *dir, struct dentry *dentry)
 	/* Drop our reference from above */
 	config_item_put(item);
 
-	module_put(owner);
+	module_put(dead_item_owner);
+	module_put(subsys_owner);
 
 	return 0;
 }
@@ -1314,13 +1420,24 @@ static int configfs_dir_open(struct inode *inode, struct file *file)
 {
 	struct dentry * dentry = file->f_path.dentry;
 	struct configfs_dirent * parent_sd = dentry->d_fsdata;
+	int err;
 
 	mutex_lock(&dentry->d_inode->i_mutex);
-	file->private_data = configfs_new_dirent(parent_sd, NULL);
+	/*
+	 * Fake invisibility if dir belongs to a group/default groups hierarchy
+	 * being attached
+	 */
+	err = -ENOENT;
+	if (configfs_dirent_is_ready(parent_sd)) {
+		file->private_data = configfs_new_dirent(parent_sd, NULL);
+		if (IS_ERR(file->private_data))
+			err = PTR_ERR(file->private_data);
+		else
+			err = 0;
+	}
 	mutex_unlock(&dentry->d_inode->i_mutex);
 
-	return IS_ERR(file->private_data) ? PTR_ERR(file->private_data) : 0;
-
+	return err;
 }
 
 static int configfs_dir_close(struct inode *inode, struct file *file)
@@ -1491,6 +1608,10 @@ int configfs_register_subsystem(struct configfs_subsystem *subsys)
 		if (err) {
 			d_delete(dentry);
 			dput(dentry);
+		} else {
+			spin_lock(&configfs_dirent_lock);
+			configfs_dir_set_ready(dentry->d_fsdata);
+			spin_unlock(&configfs_dirent_lock);
 		}
 	}
 
@@ -1517,11 +1638,13 @@ void configfs_unregister_subsystem(struct configfs_subsystem *subsys)
 	mutex_lock_nested(&configfs_sb->s_root->d_inode->i_mutex,
 			  I_MUTEX_PARENT);
 	mutex_lock_nested(&dentry->d_inode->i_mutex, I_MUTEX_CHILD);
+	mutex_lock(&configfs_symlink_mutex);
 	spin_lock(&configfs_dirent_lock);
 	if (configfs_detach_prep(dentry, NULL)) {
 		printk(KERN_ERR "configfs: Tried to unregister non-empty subsystem!\n");
 	}
 	spin_unlock(&configfs_dirent_lock);
+	mutex_unlock(&configfs_symlink_mutex);
 	configfs_detach_group(&group->cg_item);
 	dentry->d_inode->i_flags |= S_DEAD;
 	mutex_unlock(&dentry->d_inode->i_mutex);
diff --git a/fs/configfs/symlink.c b/fs/configfs/symlink.c
index 0004d18c40ac..bf74973b0492 100644
--- a/fs/configfs/symlink.c
+++ b/fs/configfs/symlink.c
@@ -31,6 +31,9 @@
 #include <linux/configfs.h>
 #include "configfs_internal.h"
 
+/* Protects attachments of new symlinks */
+DEFINE_MUTEX(configfs_symlink_mutex);
+
 static int item_depth(struct config_item * item)
 {
 	struct config_item * p = item;
@@ -73,11 +76,20 @@ static int create_link(struct config_item *parent_item,
 	struct configfs_symlink *sl;
 	int ret;
 
+	ret = -ENOENT;
+	if (!configfs_dirent_is_ready(target_sd))
+		goto out;
 	ret = -ENOMEM;
 	sl = kmalloc(sizeof(struct configfs_symlink), GFP_KERNEL);
 	if (sl) {
 		sl->sl_target = config_item_get(item);
 		spin_lock(&configfs_dirent_lock);
+		if (target_sd->s_type & CONFIGFS_USET_DROPPING) {
+			spin_unlock(&configfs_dirent_lock);
+			config_item_put(item);
+			kfree(sl);
+			return -ENOENT;
+		}
 		list_add(&sl->sl_list, &target_sd->s_links);
 		spin_unlock(&configfs_dirent_lock);
 		ret = configfs_create_link(sl, parent_item->ci_dentry,
@@ -91,6 +103,7 @@ static int create_link(struct config_item *parent_item,
 		}
 	}
 
+out:
 	return ret;
 }
 
@@ -120,6 +133,7 @@ int configfs_symlink(struct inode *dir, struct dentry *dentry, const char *symna
 {
 	int ret;
 	struct nameidata nd;
+	struct configfs_dirent *sd;
 	struct config_item *parent_item;
 	struct config_item *target_item;
 	struct config_item_type *type;
@@ -128,9 +142,19 @@ int configfs_symlink(struct inode *dir, struct dentry *dentry, const char *symna
 	if (dentry->d_parent == configfs_sb->s_root)
 		goto out;
 
+	sd = dentry->d_parent->d_fsdata;
+	/*
+	 * Fake invisibility if dir belongs to a group/default groups hierarchy
+	 * being attached
+	 */
+	ret = -ENOENT;
+	if (!configfs_dirent_is_ready(sd))
+		goto out;
+
 	parent_item = configfs_get_config_item(dentry->d_parent);
 	type = parent_item->ci_type;
 
+	ret = -EPERM;
 	if (!type || !type->ct_item_ops ||
 	    !type->ct_item_ops->allow_link)
 		goto out_put;
@@ -141,7 +165,9 @@ int configfs_symlink(struct inode *dir, struct dentry *dentry, const char *symna
 
 	ret = type->ct_item_ops->allow_link(parent_item, target_item);
 	if (!ret) {
+		mutex_lock(&configfs_symlink_mutex);
 		ret = create_link(parent_item, target_item, dentry);
+		mutex_unlock(&configfs_symlink_mutex);
 		if (ret && type->ct_item_ops->drop_link)
 			type->ct_item_ops->drop_link(parent_item,
 						     target_item);
diff --git a/fs/cramfs/inode.c b/fs/cramfs/inode.c
index 0c3b618c15b3..f40423eb1a14 100644
--- a/fs/cramfs/inode.c
+++ b/fs/cramfs/inode.c
@@ -43,58 +43,13 @@ static DEFINE_MUTEX(read_mutex);
 static int cramfs_iget5_test(struct inode *inode, void *opaque)
 {
 	struct cramfs_inode *cramfs_inode = opaque;
-
-	if (inode->i_ino != CRAMINO(cramfs_inode))
-		return 0; /* does not match */
-
-	if (inode->i_ino != 1)
-		return 1;
-
-	/* all empty directories, char, block, pipe, and sock, share inode #1 */
-
-	if ((inode->i_mode != cramfs_inode->mode) ||
-	    (inode->i_gid != cramfs_inode->gid) ||
-	    (inode->i_uid != cramfs_inode->uid))
-		return 0; /* does not match */
-
-	if ((S_ISCHR(inode->i_mode) || S_ISBLK(inode->i_mode)) &&
-	    (inode->i_rdev != old_decode_dev(cramfs_inode->size)))
-		return 0; /* does not match */
-
-	return 1; /* matches */
+	return inode->i_ino == CRAMINO(cramfs_inode) && inode->i_ino != 1;
 }
 
 static int cramfs_iget5_set(struct inode *inode, void *opaque)
 {
-	static struct timespec zerotime;
 	struct cramfs_inode *cramfs_inode = opaque;
-	inode->i_mode = cramfs_inode->mode;
-	inode->i_uid = cramfs_inode->uid;
-	inode->i_size = cramfs_inode->size;
-	inode->i_blocks = (cramfs_inode->size - 1) / 512 + 1;
-	inode->i_gid = cramfs_inode->gid;
-	/* Struct copy intentional */
-	inode->i_mtime = inode->i_atime = inode->i_ctime = zerotime;
 	inode->i_ino = CRAMINO(cramfs_inode);
-	/* inode->i_nlink is left 1 - arguably wrong for directories,
-	   but it's the best we can do without reading the directory
-           contents.  1 yields the right result in GNU find, even
-	   without -noleaf option. */
-	if (S_ISREG(inode->i_mode)) {
-		inode->i_fop = &generic_ro_fops;
-		inode->i_data.a_ops = &cramfs_aops;
-	} else if (S_ISDIR(inode->i_mode)) {
-		inode->i_op = &cramfs_dir_inode_operations;
-		inode->i_fop = &cramfs_directory_operations;
-	} else if (S_ISLNK(inode->i_mode)) {
-		inode->i_op = &page_symlink_inode_operations;
-		inode->i_data.a_ops = &cramfs_aops;
-	} else {
-		inode->i_size = 0;
-		inode->i_blocks = 0;
-		init_special_inode(inode, inode->i_mode,
-			old_decode_dev(cramfs_inode->size));
-	}
 	return 0;
 }
 
@@ -104,12 +59,48 @@ static struct inode *get_cramfs_inode(struct super_block *sb,
 	struct inode *inode = iget5_locked(sb, CRAMINO(cramfs_inode),
 					    cramfs_iget5_test, cramfs_iget5_set,
 					    cramfs_inode);
+	static struct timespec zerotime;
+
 	if (inode && (inode->i_state & I_NEW)) {
+		inode->i_mode = cramfs_inode->mode;
+		inode->i_uid = cramfs_inode->uid;
+		inode->i_size = cramfs_inode->size;
+		inode->i_blocks = (cramfs_inode->size - 1) / 512 + 1;
+		inode->i_gid = cramfs_inode->gid;
+		/* Struct copy intentional */
+		inode->i_mtime = inode->i_atime = inode->i_ctime = zerotime;
+		/* inode->i_nlink is left 1 - arguably wrong for directories,
+		   but it's the best we can do without reading the directory
+		   contents.  1 yields the right result in GNU find, even
+		   without -noleaf option. */
+		if (S_ISREG(inode->i_mode)) {
+			inode->i_fop = &generic_ro_fops;
+			inode->i_data.a_ops = &cramfs_aops;
+		} else if (S_ISDIR(inode->i_mode)) {
+			inode->i_op = &cramfs_dir_inode_operations;
+			inode->i_fop = &cramfs_directory_operations;
+		} else if (S_ISLNK(inode->i_mode)) {
+			inode->i_op = &page_symlink_inode_operations;
+			inode->i_data.a_ops = &cramfs_aops;
+		} else {
+			inode->i_size = 0;
+			inode->i_blocks = 0;
+			init_special_inode(inode, inode->i_mode,
+				old_decode_dev(cramfs_inode->size));
+		}
 		unlock_new_inode(inode);
 	}
 	return inode;
 }
 
+static void cramfs_drop_inode(struct inode *inode)
+{
+	if (inode->i_ino == 1)
+		generic_delete_inode(inode);
+	else
+		generic_drop_inode(inode);
+}
+
 /*
  * We have our own block cache: don't fill up the buffer cache
  * with the rom-image, because the way the filesystem is set
@@ -534,6 +525,7 @@ static const struct super_operations cramfs_ops = {
 	.put_super	= cramfs_put_super,
 	.remount_fs	= cramfs_remount,
 	.statfs		= cramfs_statfs,
+	.drop_inode	= cramfs_drop_inode,
 };
 
 static int cramfs_get_sb(struct file_system_type *fs_type,
diff --git a/fs/dcache.c b/fs/dcache.c
index 3818d6ab76ca..80e93956aced 100644
--- a/fs/dcache.c
+++ b/fs/dcache.c
@@ -487,6 +487,7 @@ restart:
 				if (!cnt)
 					break;
 			}
+			cond_resched_lock(&dcache_lock);
 		}
 	}
 	while (!list_empty(&tmp)) {
@@ -1219,6 +1220,107 @@ struct dentry *d_splice_alias(struct inode *inode, struct dentry *dentry)
 	return new;
 }
 
+/**
+ * d_add_ci - lookup or allocate new dentry with case-exact name
+ * @inode:  the inode case-insensitive lookup has found
+ * @dentry: the negative dentry that was passed to the parent's lookup func
+ * @name:   the case-exact name to be associated with the returned dentry
+ *
+ * This is to avoid filling the dcache with case-insensitive names to the
+ * same inode, only the actual correct case is stored in the dcache for
+ * case-insensitive filesystems.
+ *
+ * For a case-insensitive lookup match and if the the case-exact dentry
+ * already exists in in the dcache, use it and return it.
+ *
+ * If no entry exists with the exact case name, allocate new dentry with
+ * the exact case, and return the spliced entry.
+ */
+struct dentry *d_add_ci(struct dentry *dentry, struct inode *inode,
+			struct qstr *name)
+{
+	int error;
+	struct dentry *found;
+	struct dentry *new;
+
+	/* Does a dentry matching the name exist already? */
+	found = d_hash_and_lookup(dentry->d_parent, name);
+	/* If not, create it now and return */
+	if (!found) {
+		new = d_alloc(dentry->d_parent, name);
+		if (!new) {
+			error = -ENOMEM;
+			goto err_out;
+		}
+		found = d_splice_alias(inode, new);
+		if (found) {
+			dput(new);
+			return found;
+		}
+		return new;
+	}
+	/* Matching dentry exists, check if it is negative. */
+	if (found->d_inode) {
+		if (unlikely(found->d_inode != inode)) {
+			/* This can't happen because bad inodes are unhashed. */
+			BUG_ON(!is_bad_inode(inode));
+			BUG_ON(!is_bad_inode(found->d_inode));
+		}
+		/*
+		 * Already have the inode and the dentry attached, decrement
+		 * the reference count to balance the iget() done
+		 * earlier on.  We found the dentry using d_lookup() so it
+		 * cannot be disconnected and thus we do not need to worry
+		 * about any NFS/disconnectedness issues here.
+		 */
+		iput(inode);
+		return found;
+	}
+	/*
+	 * Negative dentry: instantiate it unless the inode is a directory and
+	 * has a 'disconnected' dentry (i.e. IS_ROOT and DCACHE_DISCONNECTED),
+	 * in which case d_move() that in place of the found dentry.
+	 */
+	if (!S_ISDIR(inode->i_mode)) {
+		/* Not a directory; everything is easy. */
+		d_instantiate(found, inode);
+		return found;
+	}
+	spin_lock(&dcache_lock);
+	if (list_empty(&inode->i_dentry)) {
+		/*
+		 * Directory without a 'disconnected' dentry; we need to do
+		 * d_instantiate() by hand because it takes dcache_lock which
+		 * we already hold.
+		 */
+		list_add(&found->d_alias, &inode->i_dentry);
+		found->d_inode = inode;
+		spin_unlock(&dcache_lock);
+		security_d_instantiate(found, inode);
+		return found;
+	}
+	/*
+	 * Directory with a 'disconnected' dentry; get a reference to the
+	 * 'disconnected' dentry.
+	 */
+	new = list_entry(inode->i_dentry.next, struct dentry, d_alias);
+	dget_locked(new);
+	spin_unlock(&dcache_lock);
+	/* Do security vodoo. */
+	security_d_instantiate(found, inode);
+	/* Move new in place of found. */
+	d_move(new, found);
+	/* Balance the iget() we did above. */
+	iput(inode);
+	/* Throw away found. */
+	dput(found);
+	/* Use new as the actual dentry. */
+	return new;
+
+err_out:
+	iput(inode);
+	return ERR_PTR(error);
+}
 
 /**
  * d_lookup - search for a dentry
@@ -2253,6 +2355,7 @@ EXPORT_SYMBOL(d_path);
 EXPORT_SYMBOL(d_prune_aliases);
 EXPORT_SYMBOL(d_rehash);
 EXPORT_SYMBOL(d_splice_alias);
+EXPORT_SYMBOL(d_add_ci);
 EXPORT_SYMBOL(d_validate);
 EXPORT_SYMBOL(dget_locked);
 EXPORT_SYMBOL(dput);
diff --git a/fs/devpts/inode.c b/fs/devpts/inode.c
index 285b64a8b06e..488eb424f662 100644
--- a/fs/devpts/inode.c
+++ b/fs/devpts/inode.c
@@ -29,7 +29,7 @@
 #define DEVPTS_DEFAULT_MODE 0600
 
 extern int pty_limit;			/* Config limit on Unix98 ptys */
-static DEFINE_IDR(allocated_ptys);
+static DEFINE_IDA(allocated_ptys);
 static DEFINE_MUTEX(allocated_ptys_lock);
 
 static struct vfsmount *devpts_mnt;
@@ -180,24 +180,24 @@ static struct dentry *get_node(int num)
 int devpts_new_index(void)
 {
 	int index;
-	int idr_ret;
+	int ida_ret;
 
 retry:
-	if (!idr_pre_get(&allocated_ptys, GFP_KERNEL)) {
+	if (!ida_pre_get(&allocated_ptys, GFP_KERNEL)) {
 		return -ENOMEM;
 	}
 
 	mutex_lock(&allocated_ptys_lock);
-	idr_ret = idr_get_new(&allocated_ptys, NULL, &index);
-	if (idr_ret < 0) {
+	ida_ret = ida_get_new(&allocated_ptys, &index);
+	if (ida_ret < 0) {
 		mutex_unlock(&allocated_ptys_lock);
-		if (idr_ret == -EAGAIN)
+		if (ida_ret == -EAGAIN)
 			goto retry;
 		return -EIO;
 	}
 
 	if (index >= pty_limit) {
-		idr_remove(&allocated_ptys, index);
+		ida_remove(&allocated_ptys, index);
 		mutex_unlock(&allocated_ptys_lock);
 		return -EIO;
 	}
@@ -208,7 +208,7 @@ retry:
 void devpts_kill_index(int idx)
 {
 	mutex_lock(&allocated_ptys_lock);
-	idr_remove(&allocated_ptys, idx);
+	ida_remove(&allocated_ptys, idx);
 	mutex_unlock(&allocated_ptys_lock);
 }
 
diff --git a/fs/direct-io.c b/fs/direct-io.c
index 9e81addbd6ea..9606ee848fd8 100644
--- a/fs/direct-io.c
+++ b/fs/direct-io.c
@@ -150,17 +150,11 @@ static int dio_refill_pages(struct dio *dio)
 	int nr_pages;
 
 	nr_pages = min(dio->total_pages - dio->curr_page, DIO_PAGES);
-	down_read(&current->mm->mmap_sem);
-	ret = get_user_pages(
-		current,			/* Task for fault acounting */
-		current->mm,			/* whose pages? */
+	ret = get_user_pages_fast(
 		dio->curr_user_address,		/* Where from? */
 		nr_pages,			/* How many pages? */
 		dio->rw == READ,		/* Write to memory? */
-		0,				/* force (?) */
-		&dio->pages[0],
-		NULL);				/* vmas */
-	up_read(&current->mm->mmap_sem);
+		&dio->pages[0]);		/* Put results here */
 
 	if (ret < 0 && dio->blocks_available && (dio->rw & WRITE)) {
 		struct page *page = ZERO_PAGE(0);
diff --git a/fs/dlm/config.c b/fs/dlm/config.c
index c4e7d721bd8d..89d2fb7b991a 100644
--- a/fs/dlm/config.c
+++ b/fs/dlm/config.c
@@ -2,7 +2,7 @@
 *******************************************************************************
 **
 **  Copyright (C) Sistina Software, Inc.  1997-2003  All rights reserved.
-**  Copyright (C) 2004-2007 Red Hat, Inc.  All rights reserved.
+**  Copyright (C) 2004-2008 Red Hat, Inc.  All rights reserved.
 **
 **  This copyrighted material is made available to anyone wishing to use,
 **  modify, copy, or redistribute it subject to the terms and conditions
@@ -30,16 +30,16 @@
 
 static struct config_group *space_list;
 static struct config_group *comm_list;
-static struct comm *local_comm;
+static struct dlm_comm *local_comm;
 
-struct clusters;
-struct cluster;
-struct spaces;
-struct space;
-struct comms;
-struct comm;
-struct nodes;
-struct node;
+struct dlm_clusters;
+struct dlm_cluster;
+struct dlm_spaces;
+struct dlm_space;
+struct dlm_comms;
+struct dlm_comm;
+struct dlm_nodes;
+struct dlm_node;
 
 static struct config_group *make_cluster(struct config_group *, const char *);
 static void drop_cluster(struct config_group *, struct config_item *);
@@ -68,17 +68,22 @@ static ssize_t show_node(struct config_item *i, struct configfs_attribute *a,
 static ssize_t store_node(struct config_item *i, struct configfs_attribute *a,
 			  const char *buf, size_t len);
 
-static ssize_t comm_nodeid_read(struct comm *cm, char *buf);
-static ssize_t comm_nodeid_write(struct comm *cm, const char *buf, size_t len);
-static ssize_t comm_local_read(struct comm *cm, char *buf);
-static ssize_t comm_local_write(struct comm *cm, const char *buf, size_t len);
-static ssize_t comm_addr_write(struct comm *cm, const char *buf, size_t len);
-static ssize_t node_nodeid_read(struct node *nd, char *buf);
-static ssize_t node_nodeid_write(struct node *nd, const char *buf, size_t len);
-static ssize_t node_weight_read(struct node *nd, char *buf);
-static ssize_t node_weight_write(struct node *nd, const char *buf, size_t len);
-
-struct cluster {
+static ssize_t comm_nodeid_read(struct dlm_comm *cm, char *buf);
+static ssize_t comm_nodeid_write(struct dlm_comm *cm, const char *buf,
+				size_t len);
+static ssize_t comm_local_read(struct dlm_comm *cm, char *buf);
+static ssize_t comm_local_write(struct dlm_comm *cm, const char *buf,
+				size_t len);
+static ssize_t comm_addr_write(struct dlm_comm *cm, const char *buf,
+				size_t len);
+static ssize_t node_nodeid_read(struct dlm_node *nd, char *buf);
+static ssize_t node_nodeid_write(struct dlm_node *nd, const char *buf,
+				size_t len);
+static ssize_t node_weight_read(struct dlm_node *nd, char *buf);
+static ssize_t node_weight_write(struct dlm_node *nd, const char *buf,
+				size_t len);
+
+struct dlm_cluster {
 	struct config_group group;
 	unsigned int cl_tcp_port;
 	unsigned int cl_buffer_size;
@@ -109,11 +114,11 @@ enum {
 
 struct cluster_attribute {
 	struct configfs_attribute attr;
-	ssize_t (*show)(struct cluster *, char *);
-	ssize_t (*store)(struct cluster *, const char *, size_t);
+	ssize_t (*show)(struct dlm_cluster *, char *);
+	ssize_t (*store)(struct dlm_cluster *, const char *, size_t);
 };
 
-static ssize_t cluster_set(struct cluster *cl, unsigned int *cl_field,
+static ssize_t cluster_set(struct dlm_cluster *cl, unsigned int *cl_field,
 			   int *info_field, int check_zero,
 			   const char *buf, size_t len)
 {
@@ -134,12 +139,12 @@ static ssize_t cluster_set(struct cluster *cl, unsigned int *cl_field,
 }
 
 #define CLUSTER_ATTR(name, check_zero)                                        \
-static ssize_t name##_write(struct cluster *cl, const char *buf, size_t len)  \
+static ssize_t name##_write(struct dlm_cluster *cl, const char *buf, size_t len) \
 {                                                                             \
 	return cluster_set(cl, &cl->cl_##name, &dlm_config.ci_##name,         \
 			   check_zero, buf, len);                             \
 }                                                                             \
-static ssize_t name##_read(struct cluster *cl, char *buf)                     \
+static ssize_t name##_read(struct dlm_cluster *cl, char *buf)                 \
 {                                                                             \
 	return snprintf(buf, PAGE_SIZE, "%u\n", cl->cl_##name);               \
 }                                                                             \
@@ -181,8 +186,8 @@ enum {
 
 struct comm_attribute {
 	struct configfs_attribute attr;
-	ssize_t (*show)(struct comm *, char *);
-	ssize_t (*store)(struct comm *, const char *, size_t);
+	ssize_t (*show)(struct dlm_comm *, char *);
+	ssize_t (*store)(struct dlm_comm *, const char *, size_t);
 };
 
 static struct comm_attribute comm_attr_nodeid = {
@@ -222,8 +227,8 @@ enum {
 
 struct node_attribute {
 	struct configfs_attribute attr;
-	ssize_t (*show)(struct node *, char *);
-	ssize_t (*store)(struct node *, const char *, size_t);
+	ssize_t (*show)(struct dlm_node *, char *);
+	ssize_t (*store)(struct dlm_node *, const char *, size_t);
 };
 
 static struct node_attribute node_attr_nodeid = {
@@ -248,26 +253,26 @@ static struct configfs_attribute *node_attrs[] = {
 	NULL,
 };
 
-struct clusters {
+struct dlm_clusters {
 	struct configfs_subsystem subsys;
 };
 
-struct spaces {
+struct dlm_spaces {
 	struct config_group ss_group;
 };
 
-struct space {
+struct dlm_space {
 	struct config_group group;
 	struct list_head members;
 	struct mutex members_lock;
 	int members_count;
 };
 
-struct comms {
+struct dlm_comms {
 	struct config_group cs_group;
 };
 
-struct comm {
+struct dlm_comm {
 	struct config_item item;
 	int nodeid;
 	int local;
@@ -275,11 +280,11 @@ struct comm {
 	struct sockaddr_storage *addr[DLM_MAX_ADDR_COUNT];
 };
 
-struct nodes {
+struct dlm_nodes {
 	struct config_group ns_group;
 };
 
-struct node {
+struct dlm_node {
 	struct config_item item;
 	struct list_head list; /* space->members */
 	int nodeid;
@@ -372,38 +377,40 @@ static struct config_item_type node_type = {
 	.ct_owner = THIS_MODULE,
 };
 
-static struct cluster *to_cluster(struct config_item *i)
+static struct dlm_cluster *to_cluster(struct config_item *i)
 {
-	return i ? container_of(to_config_group(i), struct cluster, group):NULL;
+	return i ? container_of(to_config_group(i), struct dlm_cluster, group) :
+		   NULL;
 }
 
-static struct space *to_space(struct config_item *i)
+static struct dlm_space *to_space(struct config_item *i)
 {
-	return i ? container_of(to_config_group(i), struct space, group) : NULL;
+	return i ? container_of(to_config_group(i), struct dlm_space, group) :
+		   NULL;
 }
 
-static struct comm *to_comm(struct config_item *i)
+static struct dlm_comm *to_comm(struct config_item *i)
 {
-	return i ? container_of(i, struct comm, item) : NULL;
+	return i ? container_of(i, struct dlm_comm, item) : NULL;
 }
 
-static struct node *to_node(struct config_item *i)
+static struct dlm_node *to_node(struct config_item *i)
 {
-	return i ? container_of(i, struct node, item) : NULL;
+	return i ? container_of(i, struct dlm_node, item) : NULL;
 }
 
 static struct config_group *make_cluster(struct config_group *g,
 					 const char *name)
 {
-	struct cluster *cl = NULL;
-	struct spaces *sps = NULL;
-	struct comms *cms = NULL;
+	struct dlm_cluster *cl = NULL;
+	struct dlm_spaces *sps = NULL;
+	struct dlm_comms *cms = NULL;
 	void *gps = NULL;
 
-	cl = kzalloc(sizeof(struct cluster), GFP_KERNEL);
+	cl = kzalloc(sizeof(struct dlm_cluster), GFP_KERNEL);
 	gps = kcalloc(3, sizeof(struct config_group *), GFP_KERNEL);
-	sps = kzalloc(sizeof(struct spaces), GFP_KERNEL);
-	cms = kzalloc(sizeof(struct comms), GFP_KERNEL);
+	sps = kzalloc(sizeof(struct dlm_spaces), GFP_KERNEL);
+	cms = kzalloc(sizeof(struct dlm_comms), GFP_KERNEL);
 
 	if (!cl || !gps || !sps || !cms)
 		goto fail;
@@ -443,7 +450,7 @@ static struct config_group *make_cluster(struct config_group *g,
 
 static void drop_cluster(struct config_group *g, struct config_item *i)
 {
-	struct cluster *cl = to_cluster(i);
+	struct dlm_cluster *cl = to_cluster(i);
 	struct config_item *tmp;
 	int j;
 
@@ -461,20 +468,20 @@ static void drop_cluster(struct config_group *g, struct config_item *i)
 
 static void release_cluster(struct config_item *i)
 {
-	struct cluster *cl = to_cluster(i);
+	struct dlm_cluster *cl = to_cluster(i);
 	kfree(cl->group.default_groups);
 	kfree(cl);
 }
 
 static struct config_group *make_space(struct config_group *g, const char *name)
 {
-	struct space *sp = NULL;
-	struct nodes *nds = NULL;
+	struct dlm_space *sp = NULL;
+	struct dlm_nodes *nds = NULL;
 	void *gps = NULL;
 
-	sp = kzalloc(sizeof(struct space), GFP_KERNEL);
+	sp = kzalloc(sizeof(struct dlm_space), GFP_KERNEL);
 	gps = kcalloc(2, sizeof(struct config_group *), GFP_KERNEL);
-	nds = kzalloc(sizeof(struct nodes), GFP_KERNEL);
+	nds = kzalloc(sizeof(struct dlm_nodes), GFP_KERNEL);
 
 	if (!sp || !gps || !nds)
 		goto fail;
@@ -500,7 +507,7 @@ static struct config_group *make_space(struct config_group *g, const char *name)
 
 static void drop_space(struct config_group *g, struct config_item *i)
 {
-	struct space *sp = to_space(i);
+	struct dlm_space *sp = to_space(i);
 	struct config_item *tmp;
 	int j;
 
@@ -517,16 +524,16 @@ static void drop_space(struct config_group *g, struct config_item *i)
 
 static void release_space(struct config_item *i)
 {
-	struct space *sp = to_space(i);
+	struct dlm_space *sp = to_space(i);
 	kfree(sp->group.default_groups);
 	kfree(sp);
 }
 
 static struct config_item *make_comm(struct config_group *g, const char *name)
 {
-	struct comm *cm;
+	struct dlm_comm *cm;
 
-	cm = kzalloc(sizeof(struct comm), GFP_KERNEL);
+	cm = kzalloc(sizeof(struct dlm_comm), GFP_KERNEL);
 	if (!cm)
 		return ERR_PTR(-ENOMEM);
 
@@ -539,7 +546,7 @@ static struct config_item *make_comm(struct config_group *g, const char *name)
 
 static void drop_comm(struct config_group *g, struct config_item *i)
 {
-	struct comm *cm = to_comm(i);
+	struct dlm_comm *cm = to_comm(i);
 	if (local_comm == cm)
 		local_comm = NULL;
 	dlm_lowcomms_close(cm->nodeid);
@@ -550,16 +557,16 @@ static void drop_comm(struct config_group *g, struct config_item *i)
 
 static void release_comm(struct config_item *i)
 {
-	struct comm *cm = to_comm(i);
+	struct dlm_comm *cm = to_comm(i);
 	kfree(cm);
 }
 
 static struct config_item *make_node(struct config_group *g, const char *name)
 {
-	struct space *sp = to_space(g->cg_item.ci_parent);
-	struct node *nd;
+	struct dlm_space *sp = to_space(g->cg_item.ci_parent);
+	struct dlm_node *nd;
 
-	nd = kzalloc(sizeof(struct node), GFP_KERNEL);
+	nd = kzalloc(sizeof(struct dlm_node), GFP_KERNEL);
 	if (!nd)
 		return ERR_PTR(-ENOMEM);
 
@@ -578,8 +585,8 @@ static struct config_item *make_node(struct config_group *g, const char *name)
 
 static void drop_node(struct config_group *g, struct config_item *i)
 {
-	struct space *sp = to_space(g->cg_item.ci_parent);
-	struct node *nd = to_node(i);
+	struct dlm_space *sp = to_space(g->cg_item.ci_parent);
+	struct dlm_node *nd = to_node(i);
 
 	mutex_lock(&sp->members_lock);
 	list_del(&nd->list);
@@ -591,11 +598,11 @@ static void drop_node(struct config_group *g, struct config_item *i)
 
 static void release_node(struct config_item *i)
 {
-	struct node *nd = to_node(i);
+	struct dlm_node *nd = to_node(i);
 	kfree(nd);
 }
 
-static struct clusters clusters_root = {
+static struct dlm_clusters clusters_root = {
 	.subsys = {
 		.su_group = {
 			.cg_item = {
@@ -625,7 +632,7 @@ void dlm_config_exit(void)
 static ssize_t show_cluster(struct config_item *i, struct configfs_attribute *a,
 			    char *buf)
 {
-	struct cluster *cl = to_cluster(i);
+	struct dlm_cluster *cl = to_cluster(i);
 	struct cluster_attribute *cla =
 			container_of(a, struct cluster_attribute, attr);
 	return cla->show ? cla->show(cl, buf) : 0;
@@ -635,7 +642,7 @@ static ssize_t store_cluster(struct config_item *i,
 			     struct configfs_attribute *a,
 			     const char *buf, size_t len)
 {
-	struct cluster *cl = to_cluster(i);
+	struct dlm_cluster *cl = to_cluster(i);
 	struct cluster_attribute *cla =
 		container_of(a, struct cluster_attribute, attr);
 	return cla->store ? cla->store(cl, buf, len) : -EINVAL;
@@ -644,7 +651,7 @@ static ssize_t store_cluster(struct config_item *i,
 static ssize_t show_comm(struct config_item *i, struct configfs_attribute *a,
 			 char *buf)
 {
-	struct comm *cm = to_comm(i);
+	struct dlm_comm *cm = to_comm(i);
 	struct comm_attribute *cma =
 			container_of(a, struct comm_attribute, attr);
 	return cma->show ? cma->show(cm, buf) : 0;
@@ -653,29 +660,31 @@ static ssize_t show_comm(struct config_item *i, struct configfs_attribute *a,
 static ssize_t store_comm(struct config_item *i, struct configfs_attribute *a,
 			  const char *buf, size_t len)
 {
-	struct comm *cm = to_comm(i);
+	struct dlm_comm *cm = to_comm(i);
 	struct comm_attribute *cma =
 		container_of(a, struct comm_attribute, attr);
 	return cma->store ? cma->store(cm, buf, len) : -EINVAL;
 }
 
-static ssize_t comm_nodeid_read(struct comm *cm, char *buf)
+static ssize_t comm_nodeid_read(struct dlm_comm *cm, char *buf)
 {
 	return sprintf(buf, "%d\n", cm->nodeid);
 }
 
-static ssize_t comm_nodeid_write(struct comm *cm, const char *buf, size_t len)
+static ssize_t comm_nodeid_write(struct dlm_comm *cm, const char *buf,
+				 size_t len)
 {
 	cm->nodeid = simple_strtol(buf, NULL, 0);
 	return len;
 }
 
-static ssize_t comm_local_read(struct comm *cm, char *buf)
+static ssize_t comm_local_read(struct dlm_comm *cm, char *buf)
 {
 	return sprintf(buf, "%d\n", cm->local);
 }
 
-static ssize_t comm_local_write(struct comm *cm, const char *buf, size_t len)
+static ssize_t comm_local_write(struct dlm_comm *cm, const char *buf,
+				size_t len)
 {
 	cm->local= simple_strtol(buf, NULL, 0);
 	if (cm->local && !local_comm)
@@ -683,7 +692,7 @@ static ssize_t comm_local_write(struct comm *cm, const char *buf, size_t len)
 	return len;
 }
 
-static ssize_t comm_addr_write(struct comm *cm, const char *buf, size_t len)
+static ssize_t comm_addr_write(struct dlm_comm *cm, const char *buf, size_t len)
 {
 	struct sockaddr_storage *addr;
 
@@ -705,7 +714,7 @@ static ssize_t comm_addr_write(struct comm *cm, const char *buf, size_t len)
 static ssize_t show_node(struct config_item *i, struct configfs_attribute *a,
 			 char *buf)
 {
-	struct node *nd = to_node(i);
+	struct dlm_node *nd = to_node(i);
 	struct node_attribute *nda =
 			container_of(a, struct node_attribute, attr);
 	return nda->show ? nda->show(nd, buf) : 0;
@@ -714,29 +723,31 @@ static ssize_t show_node(struct config_item *i, struct configfs_attribute *a,
 static ssize_t store_node(struct config_item *i, struct configfs_attribute *a,
 			  const char *buf, size_t len)
 {
-	struct node *nd = to_node(i);
+	struct dlm_node *nd = to_node(i);
 	struct node_attribute *nda =
 		container_of(a, struct node_attribute, attr);
 	return nda->store ? nda->store(nd, buf, len) : -EINVAL;
 }
 
-static ssize_t node_nodeid_read(struct node *nd, char *buf)
+static ssize_t node_nodeid_read(struct dlm_node *nd, char *buf)
 {
 	return sprintf(buf, "%d\n", nd->nodeid);
 }
 
-static ssize_t node_nodeid_write(struct node *nd, const char *buf, size_t len)
+static ssize_t node_nodeid_write(struct dlm_node *nd, const char *buf,
+				 size_t len)
 {
 	nd->nodeid = simple_strtol(buf, NULL, 0);
 	return len;
 }
 
-static ssize_t node_weight_read(struct node *nd, char *buf)
+static ssize_t node_weight_read(struct dlm_node *nd, char *buf)
 {
 	return sprintf(buf, "%d\n", nd->weight);
 }
 
-static ssize_t node_weight_write(struct node *nd, const char *buf, size_t len)
+static ssize_t node_weight_write(struct dlm_node *nd, const char *buf,
+				 size_t len)
 {
 	nd->weight = simple_strtol(buf, NULL, 0);
 	return len;
@@ -746,7 +757,7 @@ static ssize_t node_weight_write(struct node *nd, const char *buf, size_t len)
  * Functions for the dlm to get the info that's been configured
  */
 
-static struct space *get_space(char *name)
+static struct dlm_space *get_space(char *name)
 {
 	struct config_item *i;
 
@@ -760,15 +771,15 @@ static struct space *get_space(char *name)
 	return to_space(i);
 }
 
-static void put_space(struct space *sp)
+static void put_space(struct dlm_space *sp)
 {
 	config_item_put(&sp->group.cg_item);
 }
 
-static struct comm *get_comm(int nodeid, struct sockaddr_storage *addr)
+static struct dlm_comm *get_comm(int nodeid, struct sockaddr_storage *addr)
 {
 	struct config_item *i;
-	struct comm *cm = NULL;
+	struct dlm_comm *cm = NULL;
 	int found = 0;
 
 	if (!comm_list)
@@ -801,7 +812,7 @@ static struct comm *get_comm(int nodeid, struct sockaddr_storage *addr)
 	return cm;
 }
 
-static void put_comm(struct comm *cm)
+static void put_comm(struct dlm_comm *cm)
 {
 	config_item_put(&cm->item);
 }
@@ -810,8 +821,8 @@ static void put_comm(struct comm *cm)
 int dlm_nodeid_list(char *lsname, int **ids_out, int *ids_count_out,
 		    int **new_out, int *new_count_out)
 {
-	struct space *sp;
-	struct node *nd;
+	struct dlm_space *sp;
+	struct dlm_node *nd;
 	int i = 0, rv = 0, ids_count = 0, new_count = 0;
 	int *ids, *new;
 
@@ -874,8 +885,8 @@ int dlm_nodeid_list(char *lsname, int **ids_out, int *ids_count_out,
 
 int dlm_node_weight(char *lsname, int nodeid)
 {
-	struct space *sp;
-	struct node *nd;
+	struct dlm_space *sp;
+	struct dlm_node *nd;
 	int w = -EEXIST;
 
 	sp = get_space(lsname);
@@ -897,7 +908,7 @@ int dlm_node_weight(char *lsname, int nodeid)
 
 int dlm_nodeid_to_addr(int nodeid, struct sockaddr_storage *addr)
 {
-	struct comm *cm = get_comm(nodeid, NULL);
+	struct dlm_comm *cm = get_comm(nodeid, NULL);
 	if (!cm)
 		return -EEXIST;
 	if (!cm->addr_count)
@@ -909,7 +920,7 @@ int dlm_nodeid_to_addr(int nodeid, struct sockaddr_storage *addr)
 
 int dlm_addr_to_nodeid(struct sockaddr_storage *addr, int *nodeid)
 {
-	struct comm *cm = get_comm(0, addr);
+	struct dlm_comm *cm = get_comm(0, addr);
 	if (!cm)
 		return -EEXIST;
 	*nodeid = cm->nodeid;
diff --git a/fs/dlm/lock.c b/fs/dlm/lock.c
index 2d3d1027ce2b..724ddac91538 100644
--- a/fs/dlm/lock.c
+++ b/fs/dlm/lock.c
@@ -363,6 +363,7 @@ static int search_rsb_list(struct list_head *head, char *name, int len,
 		if (len == r->res_length && !memcmp(name, r->res_name, len))
 			goto found;
 	}
+	*r_ret = NULL;
 	return -EBADR;
 
  found:
@@ -1782,7 +1783,8 @@ static void grant_pending_locks(struct dlm_rsb *r)
 
 	list_for_each_entry_safe(lkb, s, &r->res_grantqueue, lkb_statequeue) {
 		if (lkb->lkb_bastfn && lock_requires_bast(lkb, high, cw)) {
-			if (cw && high == DLM_LOCK_PR)
+			if (cw && high == DLM_LOCK_PR &&
+			    lkb->lkb_grmode == DLM_LOCK_PR)
 				queue_bast(r, lkb, DLM_LOCK_CW);
 			else
 				queue_bast(r, lkb, high);
diff --git a/fs/dlm/lowcomms.c b/fs/dlm/lowcomms.c
index 637018c891ef..3962262f991a 100644
--- a/fs/dlm/lowcomms.c
+++ b/fs/dlm/lowcomms.c
@@ -891,8 +891,10 @@ static void tcp_connect_to_sock(struct connection *con)
 		goto out_err;
 
 	memset(&saddr, 0, sizeof(saddr));
-	if (dlm_nodeid_to_addr(con->nodeid, &saddr))
+	if (dlm_nodeid_to_addr(con->nodeid, &saddr)) {
+		sock_release(sock);
 		goto out_err;
+	}
 
 	sock->sk->sk_user_data = con;
 	con->rx_action = receive_from_sock;
diff --git a/fs/dlm/plock.c b/fs/dlm/plock.c
index 78878c5781ca..eba87ff3177b 100644
--- a/fs/dlm/plock.c
+++ b/fs/dlm/plock.c
@@ -116,7 +116,7 @@ int dlm_posix_lock(dlm_lockspace_t *lockspace, u64 number, struct file *file,
 	if (xop->callback == NULL)
 		wait_event(recv_wq, (op->done != 0));
 	else {
-		rv = -EINPROGRESS;
+		rv = FILE_LOCK_DEFERRED;
 		goto out;
 	}
 
diff --git a/fs/dlm/user.c b/fs/dlm/user.c
index f976f303c196..34f14a14fb4e 100644
--- a/fs/dlm/user.c
+++ b/fs/dlm/user.c
@@ -527,8 +527,10 @@ static ssize_t device_write(struct file *file, const char __user *buf,
 		k32buf = (struct dlm_write_request32 *)kbuf;
 		kbuf = kmalloc(count + 1 + (sizeof(struct dlm_write_request) -
 			       sizeof(struct dlm_write_request32)), GFP_KERNEL);
-		if (!kbuf)
+		if (!kbuf) {
+			kfree(k32buf);
 			return -ENOMEM;
+		}
 
 		if (proc)
 			set_bit(DLM_PROC_FLAGS_COMPAT, &proc->flags);
@@ -539,8 +541,10 @@ static ssize_t device_write(struct file *file, const char __user *buf,
 
 	/* do we really need this? can a write happen after a close? */
 	if ((kbuf->cmd == DLM_USER_LOCK || kbuf->cmd == DLM_USER_UNLOCK) &&
-	    test_bit(DLM_PROC_FLAGS_CLOSING, &proc->flags))
-		return -EINVAL;
+	    (proc && test_bit(DLM_PROC_FLAGS_CLOSING, &proc->flags))) {
+		error = -EINVAL;
+		goto out_free;
+	}
 
 	sigfillset(&allsigs);
 	sigprocmask(SIG_BLOCK, &allsigs, &tmpsig);
diff --git a/fs/dquot.c b/fs/dquot.c
index 5ac77da19959..8ec4d6cc7633 100644
--- a/fs/dquot.c
+++ b/fs/dquot.c
@@ -562,6 +562,8 @@ static struct shrinker dqcache_shrinker = {
  */
 static void dqput(struct dquot *dquot)
 {
+	int ret;
+
 	if (!dquot)
 		return;
 #ifdef __DQUOT_PARANOIA
@@ -594,7 +596,19 @@ we_slept:
 	if (test_bit(DQ_ACTIVE_B, &dquot->dq_flags) && dquot_dirty(dquot)) {
 		spin_unlock(&dq_list_lock);
 		/* Commit dquot before releasing */
-		dquot->dq_sb->dq_op->write_dquot(dquot);
+		ret = dquot->dq_sb->dq_op->write_dquot(dquot);
+		if (ret < 0) {
+			printk(KERN_ERR "VFS: cannot write quota structure on "
+				"device %s (error %d). Quota may get out of "
+				"sync!\n", dquot->dq_sb->s_id, ret);
+			/*
+			 * We clear dirty bit anyway, so that we avoid
+			 * infinite loop here
+			 */
+			spin_lock(&dq_list_lock);
+			clear_dquot_dirty(dquot);
+			spin_unlock(&dq_list_lock);
+		}
 		goto we_slept;
 	}
 	/* Clear flag in case dquot was inactive (something bad happened) */
@@ -875,7 +889,10 @@ static void print_warning(struct dquot *dquot, const int warntype)
 	char *msg = NULL;
 	struct tty_struct *tty;
 
-	if (!need_print_warning(dquot))
+	if (warntype == QUOTA_NL_IHARDBELOW ||
+	    warntype == QUOTA_NL_ISOFTBELOW ||
+	    warntype == QUOTA_NL_BHARDBELOW ||
+	    warntype == QUOTA_NL_BSOFTBELOW || !need_print_warning(dquot))
 		return;
 
 	mutex_lock(&tty_mutex);
@@ -1083,6 +1100,35 @@ static int check_bdq(struct dquot *dquot, qsize_t space, int prealloc, char *war
 	return QUOTA_OK;
 }
 
+static int info_idq_free(struct dquot *dquot, ulong inodes)
+{
+	if (test_bit(DQ_FAKE_B, &dquot->dq_flags) ||
+	    dquot->dq_dqb.dqb_curinodes <= dquot->dq_dqb.dqb_isoftlimit)
+		return QUOTA_NL_NOWARN;
+
+	if (dquot->dq_dqb.dqb_curinodes - inodes <= dquot->dq_dqb.dqb_isoftlimit)
+		return QUOTA_NL_ISOFTBELOW;
+	if (dquot->dq_dqb.dqb_curinodes >= dquot->dq_dqb.dqb_ihardlimit &&
+	    dquot->dq_dqb.dqb_curinodes - inodes < dquot->dq_dqb.dqb_ihardlimit)
+		return QUOTA_NL_IHARDBELOW;
+	return QUOTA_NL_NOWARN;
+}
+
+static int info_bdq_free(struct dquot *dquot, qsize_t space)
+{
+	if (test_bit(DQ_FAKE_B, &dquot->dq_flags) ||
+	    toqb(dquot->dq_dqb.dqb_curspace) <= dquot->dq_dqb.dqb_bsoftlimit)
+		return QUOTA_NL_NOWARN;
+
+	if (toqb(dquot->dq_dqb.dqb_curspace - space) <=
+	    dquot->dq_dqb.dqb_bsoftlimit)
+		return QUOTA_NL_BSOFTBELOW;
+	if (toqb(dquot->dq_dqb.dqb_curspace) >= dquot->dq_dqb.dqb_bhardlimit &&
+	    toqb(dquot->dq_dqb.dqb_curspace - space) <
+						dquot->dq_dqb.dqb_bhardlimit)
+		return QUOTA_NL_BHARDBELOW;
+	return QUOTA_NL_NOWARN;
+}
 /*
  *	Initialize quota pointers in inode
  *	Transaction must be started at entry
@@ -1139,6 +1185,28 @@ int dquot_drop(struct inode *inode)
 	return 0;
 }
 
+/* Wrapper to remove references to quota structures from inode */
+void vfs_dq_drop(struct inode *inode)
+{
+	/* Here we can get arbitrary inode from clear_inode() so we have
+	 * to be careful. OTOH we don't need locking as quota operations
+	 * are allowed to change only at mount time */
+	if (!IS_NOQUOTA(inode) && inode->i_sb && inode->i_sb->dq_op
+	    && inode->i_sb->dq_op->drop) {
+		int cnt;
+		/* Test before calling to rule out calls from proc and such
+                 * where we are not allowed to block. Note that this is
+		 * actually reliable test even without the lock - the caller
+		 * must assure that nobody can come after the DQUOT_DROP and
+		 * add quota pointers back anyway */
+		for (cnt = 0; cnt < MAXQUOTAS; cnt++)
+			if (inode->i_dquot[cnt] != NODQUOT)
+				break;
+		if (cnt < MAXQUOTAS)
+			inode->i_sb->dq_op->drop(inode);
+	}
+}
+
 /*
  * Following four functions update i_blocks+i_bytes fields and
  * quota information (together with appropriate checks)
@@ -1248,6 +1316,7 @@ warn_put_all:
 int dquot_free_space(struct inode *inode, qsize_t number)
 {
 	unsigned int cnt;
+	char warntype[MAXQUOTAS];
 
 	/* First test before acquiring mutex - solves deadlocks when we
          * re-enter the quota code and are already holding the mutex */
@@ -1256,6 +1325,7 @@ out_sub:
 		inode_sub_bytes(inode, number);
 		return QUOTA_OK;
 	}
+
 	down_read(&sb_dqopt(inode->i_sb)->dqptr_sem);
 	/* Now recheck reliably when holding dqptr_sem */
 	if (IS_NOQUOTA(inode)) {
@@ -1266,6 +1336,7 @@ out_sub:
 	for (cnt = 0; cnt < MAXQUOTAS; cnt++) {
 		if (inode->i_dquot[cnt] == NODQUOT)
 			continue;
+		warntype[cnt] = info_bdq_free(inode->i_dquot[cnt], number);
 		dquot_decr_space(inode->i_dquot[cnt], number);
 	}
 	inode_sub_bytes(inode, number);
@@ -1274,6 +1345,7 @@ out_sub:
 	for (cnt = 0; cnt < MAXQUOTAS; cnt++)
 		if (inode->i_dquot[cnt])
 			mark_dquot_dirty(inode->i_dquot[cnt]);
+	flush_warnings(inode->i_dquot, warntype);
 	up_read(&sb_dqopt(inode->i_sb)->dqptr_sem);
 	return QUOTA_OK;
 }
@@ -1284,11 +1356,13 @@ out_sub:
 int dquot_free_inode(const struct inode *inode, unsigned long number)
 {
 	unsigned int cnt;
+	char warntype[MAXQUOTAS];
 
 	/* First test before acquiring mutex - solves deadlocks when we
          * re-enter the quota code and are already holding the mutex */
 	if (IS_NOQUOTA(inode))
 		return QUOTA_OK;
+
 	down_read(&sb_dqopt(inode->i_sb)->dqptr_sem);
 	/* Now recheck reliably when holding dqptr_sem */
 	if (IS_NOQUOTA(inode)) {
@@ -1299,6 +1373,7 @@ int dquot_free_inode(const struct inode *inode, unsigned long number)
 	for (cnt = 0; cnt < MAXQUOTAS; cnt++) {
 		if (inode->i_dquot[cnt] == NODQUOT)
 			continue;
+		warntype[cnt] = info_idq_free(inode->i_dquot[cnt], number);
 		dquot_decr_inodes(inode->i_dquot[cnt], number);
 	}
 	spin_unlock(&dq_data_lock);
@@ -1306,6 +1381,7 @@ int dquot_free_inode(const struct inode *inode, unsigned long number)
 	for (cnt = 0; cnt < MAXQUOTAS; cnt++)
 		if (inode->i_dquot[cnt])
 			mark_dquot_dirty(inode->i_dquot[cnt]);
+	flush_warnings(inode->i_dquot, warntype);
 	up_read(&sb_dqopt(inode->i_sb)->dqptr_sem);
 	return QUOTA_OK;
 }
@@ -1323,7 +1399,8 @@ int dquot_transfer(struct inode *inode, struct iattr *iattr)
 	struct dquot *transfer_to[MAXQUOTAS];
 	int cnt, ret = NO_QUOTA, chuid = (iattr->ia_valid & ATTR_UID) && inode->i_uid != iattr->ia_uid,
 	    chgid = (iattr->ia_valid & ATTR_GID) && inode->i_gid != iattr->ia_gid;
-	char warntype[MAXQUOTAS];
+	char warntype_to[MAXQUOTAS];
+	char warntype_from_inodes[MAXQUOTAS], warntype_from_space[MAXQUOTAS];
 
 	/* First test before acquiring mutex - solves deadlocks when we
          * re-enter the quota code and are already holding the mutex */
@@ -1332,7 +1409,7 @@ int dquot_transfer(struct inode *inode, struct iattr *iattr)
 	/* Clear the arrays */
 	for (cnt = 0; cnt < MAXQUOTAS; cnt++) {
 		transfer_to[cnt] = transfer_from[cnt] = NODQUOT;
-		warntype[cnt] = QUOTA_NL_NOWARN;
+		warntype_to[cnt] = QUOTA_NL_NOWARN;
 	}
 	down_write(&sb_dqopt(inode->i_sb)->dqptr_sem);
 	/* Now recheck reliably when holding dqptr_sem */
@@ -1364,8 +1441,9 @@ int dquot_transfer(struct inode *inode, struct iattr *iattr)
 		if (transfer_to[cnt] == NODQUOT)
 			continue;
 		transfer_from[cnt] = inode->i_dquot[cnt];
-		if (check_idq(transfer_to[cnt], 1, warntype+cnt) == NO_QUOTA ||
-		    check_bdq(transfer_to[cnt], space, 0, warntype+cnt) == NO_QUOTA)
+		if (check_idq(transfer_to[cnt], 1, warntype_to + cnt) ==
+		    NO_QUOTA || check_bdq(transfer_to[cnt], space, 0,
+		    warntype_to + cnt) == NO_QUOTA)
 			goto warn_put_all;
 	}
 
@@ -1381,6 +1459,10 @@ int dquot_transfer(struct inode *inode, struct iattr *iattr)
 
 		/* Due to IO error we might not have transfer_from[] structure */
 		if (transfer_from[cnt]) {
+			warntype_from_inodes[cnt] =
+				info_idq_free(transfer_from[cnt], 1);
+			warntype_from_space[cnt] =
+				info_bdq_free(transfer_from[cnt], space);
 			dquot_decr_inodes(transfer_from[cnt], 1);
 			dquot_decr_space(transfer_from[cnt], space);
 		}
@@ -1400,7 +1482,9 @@ warn_put_all:
 		if (transfer_to[cnt])
 			mark_dquot_dirty(transfer_to[cnt]);
 	}
-	flush_warnings(transfer_to, warntype);
+	flush_warnings(transfer_to, warntype_to);
+	flush_warnings(transfer_from, warntype_from_inodes);
+	flush_warnings(transfer_from, warntype_from_space);
 	
 	for (cnt = 0; cnt < MAXQUOTAS; cnt++) {
 		if (ret == QUOTA_OK && transfer_from[cnt] != NODQUOT)
@@ -1412,6 +1496,18 @@ warn_put_all:
 	return ret;
 }
 
+/* Wrapper for transferring ownership of an inode */
+int vfs_dq_transfer(struct inode *inode, struct iattr *iattr)
+{
+	if (sb_any_quota_enabled(inode->i_sb) && !IS_NOQUOTA(inode)) {
+		vfs_dq_init(inode);
+		if (inode->i_sb->dq_op->transfer(inode, iattr) == NO_QUOTA)
+			return 1;
+	}
+	return 0;
+}
+
+
 /*
  * Write info of quota file to disk
  */
@@ -1697,6 +1793,21 @@ static int vfs_quota_on_remount(struct super_block *sb, int type)
 	return ret;
 }
 
+int vfs_quota_on_path(struct super_block *sb, int type, int format_id,
+		      struct path *path)
+{
+	int error = security_quota_on(path->dentry);
+	if (error)
+		return error;
+	/* Quota file not on the same filesystem? */
+	if (path->mnt->mnt_sb != sb)
+		error = -EXDEV;
+	else
+		error = vfs_quota_on_inode(path->dentry->d_inode, type,
+					   format_id);
+	return error;
+}
+
 /* Actual function called from quotactl() */
 int vfs_quota_on(struct super_block *sb, int type, int format_id, char *path,
 		 int remount)
@@ -1708,19 +1819,10 @@ int vfs_quota_on(struct super_block *sb, int type, int format_id, char *path,
 		return vfs_quota_on_remount(sb, type);
 
 	error = path_lookup(path, LOOKUP_FOLLOW, &nd);
-	if (error < 0)
-		return error;
-	error = security_quota_on(nd.path.dentry);
-	if (error)
-		goto out_path;
-	/* Quota file not on the same filesystem? */
-	if (nd.path.mnt->mnt_sb != sb)
-		error = -EXDEV;
-	else
-		error = vfs_quota_on_inode(nd.path.dentry->d_inode, type,
-					   format_id);
-out_path:
-	path_put(&nd.path);
+	if (!error) {
+		error = vfs_quota_on_path(sb, type, format_id, &nd.path);
+		path_put(&nd.path);
+	}
 	return error;
 }
 
@@ -1752,6 +1854,22 @@ out:
 	return error;
 }
 
+/* Wrapper to turn on quotas when remounting rw */
+int vfs_dq_quota_on_remount(struct super_block *sb)
+{
+	int cnt;
+	int ret = 0, err;
+
+	if (!sb->s_qcop || !sb->s_qcop->quota_on)
+		return -ENOSYS;
+	for (cnt = 0; cnt < MAXQUOTAS; cnt++) {
+		err = sb->s_qcop->quota_on(sb, cnt, 0, NULL, 1);
+		if (err < 0 && !ret)
+			ret = err;
+	}
+	return ret;
+}
+
 /* Generic routine for getting common part of quota structure */
 static void do_get_dqblk(struct dquot *dquot, struct if_dqblk *di)
 {
@@ -2073,6 +2191,7 @@ EXPORT_SYMBOL(unregister_quota_format);
 EXPORT_SYMBOL(dqstats);
 EXPORT_SYMBOL(dq_data_lock);
 EXPORT_SYMBOL(vfs_quota_on);
+EXPORT_SYMBOL(vfs_quota_on_path);
 EXPORT_SYMBOL(vfs_quota_on_mount);
 EXPORT_SYMBOL(vfs_quota_off);
 EXPORT_SYMBOL(vfs_quota_sync);
@@ -2087,8 +2206,11 @@ EXPORT_SYMBOL(dquot_release);
 EXPORT_SYMBOL(dquot_mark_dquot_dirty);
 EXPORT_SYMBOL(dquot_initialize);
 EXPORT_SYMBOL(dquot_drop);
+EXPORT_SYMBOL(vfs_dq_drop);
 EXPORT_SYMBOL(dquot_alloc_space);
 EXPORT_SYMBOL(dquot_alloc_inode);
 EXPORT_SYMBOL(dquot_free_space);
 EXPORT_SYMBOL(dquot_free_inode);
 EXPORT_SYMBOL(dquot_transfer);
+EXPORT_SYMBOL(vfs_dq_transfer);
+EXPORT_SYMBOL(vfs_dq_quota_on_remount);
diff --git a/fs/ecryptfs/crypto.c b/fs/ecryptfs/crypto.c
index 7b99917ffadc..06db79d05c12 100644
--- a/fs/ecryptfs/crypto.c
+++ b/fs/ecryptfs/crypto.c
@@ -475,8 +475,8 @@ int ecryptfs_encrypt_page(struct page *page)
 {
 	struct inode *ecryptfs_inode;
 	struct ecryptfs_crypt_stat *crypt_stat;
-	char *enc_extent_virt = NULL;
-	struct page *enc_extent_page;
+	char *enc_extent_virt;
+	struct page *enc_extent_page = NULL;
 	loff_t extent_offset;
 	int rc = 0;
 
@@ -492,14 +492,14 @@ int ecryptfs_encrypt_page(struct page *page)
 			       page->index);
 		goto out;
 	}
-	enc_extent_virt = kmalloc(PAGE_CACHE_SIZE, GFP_USER);
-	if (!enc_extent_virt) {
+	enc_extent_page = alloc_page(GFP_USER);
+	if (!enc_extent_page) {
 		rc = -ENOMEM;
 		ecryptfs_printk(KERN_ERR, "Error allocating memory for "
 				"encrypted extent\n");
 		goto out;
 	}
-	enc_extent_page = virt_to_page(enc_extent_virt);
+	enc_extent_virt = kmap(enc_extent_page);
 	for (extent_offset = 0;
 	     extent_offset < (PAGE_CACHE_SIZE / crypt_stat->extent_size);
 	     extent_offset++) {
@@ -527,7 +527,10 @@ int ecryptfs_encrypt_page(struct page *page)
 		}
 	}
 out:
-	kfree(enc_extent_virt);
+	if (enc_extent_page) {
+		kunmap(enc_extent_page);
+		__free_page(enc_extent_page);
+	}
 	return rc;
 }
 
@@ -609,8 +612,8 @@ int ecryptfs_decrypt_page(struct page *page)
 {
 	struct inode *ecryptfs_inode;
 	struct ecryptfs_crypt_stat *crypt_stat;
-	char *enc_extent_virt = NULL;
-	struct page *enc_extent_page;
+	char *enc_extent_virt;
+	struct page *enc_extent_page = NULL;
 	unsigned long extent_offset;
 	int rc = 0;
 
@@ -627,14 +630,14 @@ int ecryptfs_decrypt_page(struct page *page)
 			       page->index);
 		goto out;
 	}
-	enc_extent_virt = kmalloc(PAGE_CACHE_SIZE, GFP_USER);
-	if (!enc_extent_virt) {
+	enc_extent_page = alloc_page(GFP_USER);
+	if (!enc_extent_page) {
 		rc = -ENOMEM;
 		ecryptfs_printk(KERN_ERR, "Error allocating memory for "
 				"encrypted extent\n");
 		goto out;
 	}
-	enc_extent_page = virt_to_page(enc_extent_virt);
+	enc_extent_virt = kmap(enc_extent_page);
 	for (extent_offset = 0;
 	     extent_offset < (PAGE_CACHE_SIZE / crypt_stat->extent_size);
 	     extent_offset++) {
@@ -662,7 +665,10 @@ int ecryptfs_decrypt_page(struct page *page)
 		}
 	}
 out:
-	kfree(enc_extent_virt);
+	if (enc_extent_page) {
+		kunmap(enc_extent_page);
+		__free_page(enc_extent_page);
+	}
 	return rc;
 }
 
diff --git a/fs/ecryptfs/inode.c b/fs/ecryptfs/inode.c
index d755455e3bff..89209f00f9c7 100644
--- a/fs/ecryptfs/inode.c
+++ b/fs/ecryptfs/inode.c
@@ -465,7 +465,6 @@ static int ecryptfs_symlink(struct inode *dir, struct dentry *dentry,
 	int rc;
 	struct dentry *lower_dentry;
 	struct dentry *lower_dir_dentry;
-	umode_t mode;
 	char *encoded_symname;
 	int encoded_symlen;
 	struct ecryptfs_crypt_stat *crypt_stat = NULL;
@@ -473,7 +472,6 @@ static int ecryptfs_symlink(struct inode *dir, struct dentry *dentry,
 	lower_dentry = ecryptfs_dentry_to_lower(dentry);
 	dget(lower_dentry);
 	lower_dir_dentry = lock_parent(lower_dentry);
-	mode = S_IALLUGO;
 	encoded_symlen = ecryptfs_encode_filename(crypt_stat, symname,
 						  strlen(symname),
 						  &encoded_symname);
@@ -482,7 +480,7 @@ static int ecryptfs_symlink(struct inode *dir, struct dentry *dentry,
 		goto out_lock;
 	}
 	rc = vfs_symlink(lower_dir_dentry->d_inode, lower_dentry,
-			 encoded_symname, mode);
+			 encoded_symname);
 	kfree(encoded_symname);
 	if (rc || !lower_dentry->d_inode)
 		goto out_lock;
@@ -830,22 +828,9 @@ out:
 }
 
 static int
-ecryptfs_permission(struct inode *inode, int mask, struct nameidata *nd)
+ecryptfs_permission(struct inode *inode, int mask)
 {
-	int rc;
-
-        if (nd) {
-		struct vfsmount *vfsmnt_save = nd->path.mnt;
-		struct dentry *dentry_save = nd->path.dentry;
-
-		nd->path.mnt = ecryptfs_dentry_to_lower_mnt(nd->path.dentry);
-		nd->path.dentry = ecryptfs_dentry_to_lower(nd->path.dentry);
-		rc = permission(ecryptfs_inode_to_lower(inode), mask, nd);
-		nd->path.mnt = vfsmnt_save;
-		nd->path.dentry = dentry_save;
-        } else
-		rc = permission(ecryptfs_inode_to_lower(inode), mask, NULL);
-        return rc;
+	return inode_permission(ecryptfs_inode_to_lower(inode), mask);
 }
 
 /**
diff --git a/fs/ecryptfs/main.c b/fs/ecryptfs/main.c
index 6f403cfba14f..448dfd597b5f 100644
--- a/fs/ecryptfs/main.c
+++ b/fs/ecryptfs/main.c
@@ -578,7 +578,7 @@ static struct file_system_type ecryptfs_fs_type = {
  * Initializes the ecryptfs_inode_info_cache when it is created
  */
 static void
-inode_info_init_once(struct kmem_cache *cachep, void *vptr)
+inode_info_init_once(void *vptr)
 {
 	struct ecryptfs_inode_info *ei = (struct ecryptfs_inode_info *)vptr;
 
@@ -589,7 +589,7 @@ static struct ecryptfs_cache_info {
 	struct kmem_cache **cache;
 	const char *name;
 	size_t size;
-	void (*ctor)(struct kmem_cache *cache, void *obj);
+	void (*ctor)(void *obj);
 } ecryptfs_cache_infos[] = {
 	{
 		.cache = &ecryptfs_auth_tok_list_item_cache,
diff --git a/fs/efs/namei.c b/fs/efs/namei.c
index 3a404e7fad53..291abb11e20e 100644
--- a/fs/efs/namei.c
+++ b/fs/efs/namei.c
@@ -74,8 +74,7 @@ struct dentry *efs_lookup(struct inode *dir, struct dentry *dentry, struct namei
 	}
 	unlock_kernel();
 
-	d_add(dentry, inode);
-	return NULL;
+	return d_splice_alias(inode, dentry);
 }
 
 static struct inode *efs_nfs_get_inode(struct super_block *sb, u64 ino,
diff --git a/fs/efs/super.c b/fs/efs/super.c
index d733531b55e2..567b134fa1f1 100644
--- a/fs/efs/super.c
+++ b/fs/efs/super.c
@@ -70,7 +70,7 @@ static void efs_destroy_inode(struct inode *inode)
 	kmem_cache_free(efs_inode_cachep, INODE_INFO(inode));
 }
 
-static void init_once(struct kmem_cache *cachep, void *foo)
+static void init_once(void *foo)
 {
 	struct efs_inode_info *ei = (struct efs_inode_info *) foo;
 
diff --git a/fs/eventpoll.c b/fs/eventpoll.c
index 0c87474f7917..7cc0eb756b55 100644
--- a/fs/eventpoll.c
+++ b/fs/eventpoll.c
@@ -1041,10 +1041,7 @@ retry:
 }
 
 /*
- * It opens an eventpoll file descriptor. The "size" parameter is there
- * for historical reasons, when epoll was using an hash instead of an
- * RB tree. With the current implementation, the "size" parameter is ignored
- * (besides sanity checks).
+ * Open an eventpoll file descriptor.
  */
 asmlinkage long sys_epoll_create1(int flags)
 {
diff --git a/fs/exec.c b/fs/exec.c
index 190ed1f92774..32993beecbe9 100644
--- a/fs/exec.c
+++ b/fs/exec.c
@@ -25,10 +25,11 @@
 #include <linux/slab.h>
 #include <linux/file.h>
 #include <linux/fdtable.h>
-#include <linux/mman.h>
+#include <linux/mm.h>
 #include <linux/stat.h>
 #include <linux/fcntl.h>
 #include <linux/smp_lock.h>
+#include <linux/swap.h>
 #include <linux/string.h>
 #include <linux/init.h>
 #include <linux/pagemap.h>
@@ -37,20 +38,18 @@
 #include <linux/key.h>
 #include <linux/personality.h>
 #include <linux/binfmts.h>
-#include <linux/swap.h>
 #include <linux/utsname.h>
 #include <linux/pid_namespace.h>
 #include <linux/module.h>
 #include <linux/namei.h>
 #include <linux/proc_fs.h>
-#include <linux/ptrace.h>
 #include <linux/mount.h>
 #include <linux/security.h>
 #include <linux/syscalls.h>
-#include <linux/rmap.h>
 #include <linux/tsacct_kern.h>
 #include <linux/cn_proc.h>
 #include <linux/audit.h>
+#include <linux/tracehook.h>
 
 #include <asm/uaccess.h>
 #include <asm/mmu_context.h>
@@ -108,11 +107,17 @@ static inline void put_binfmt(struct linux_binfmt * fmt)
  */
 asmlinkage long sys_uselib(const char __user * library)
 {
-	struct file * file;
+	struct file *file;
 	struct nameidata nd;
-	int error;
-
-	error = __user_path_lookup_open(library, LOOKUP_FOLLOW, &nd, FMODE_READ|FMODE_EXEC);
+	char *tmp = getname(library);
+	int error = PTR_ERR(tmp);
+
+	if (!IS_ERR(tmp)) {
+		error = path_lookup_open(AT_FDCWD, tmp,
+					 LOOKUP_FOLLOW, &nd,
+					 FMODE_READ|FMODE_EXEC);
+		putname(tmp);
+	}
 	if (error)
 		goto out;
 
@@ -120,7 +125,11 @@ asmlinkage long sys_uselib(const char __user * library)
 	if (!S_ISREG(nd.path.dentry->d_inode->i_mode))
 		goto exit;
 
-	error = vfs_permission(&nd, MAY_READ | MAY_EXEC);
+	error = -EACCES;
+	if (nd.path.mnt->mnt_flags & MNT_NOEXEC)
+		goto exit;
+
+	error = vfs_permission(&nd, MAY_READ | MAY_EXEC | MAY_OPEN);
 	if (error)
 		goto exit;
 
@@ -658,38 +667,43 @@ EXPORT_SYMBOL(setup_arg_pages);
 struct file *open_exec(const char *name)
 {
 	struct nameidata nd;
-	int err;
 	struct file *file;
+	int err;
 
-	err = path_lookup_open(AT_FDCWD, name, LOOKUP_FOLLOW, &nd, FMODE_READ|FMODE_EXEC);
-	file = ERR_PTR(err);
-
-	if (!err) {
-		struct inode *inode = nd.path.dentry->d_inode;
-		file = ERR_PTR(-EACCES);
-		if (S_ISREG(inode->i_mode)) {
-			int err = vfs_permission(&nd, MAY_EXEC);
-			file = ERR_PTR(err);
-			if (!err) {
-				file = nameidata_to_filp(&nd,
-							O_RDONLY|O_LARGEFILE);
-				if (!IS_ERR(file)) {
-					err = deny_write_access(file);
-					if (err) {
-						fput(file);
-						file = ERR_PTR(err);
-					}
-				}
-out:
-				return file;
-			}
-		}
-		release_open_intent(&nd);
-		path_put(&nd.path);
+	err = path_lookup_open(AT_FDCWD, name, LOOKUP_FOLLOW, &nd,
+				FMODE_READ|FMODE_EXEC);
+	if (err)
+		goto out;
+
+	err = -EACCES;
+	if (!S_ISREG(nd.path.dentry->d_inode->i_mode))
+		goto out_path_put;
+
+	if (nd.path.mnt->mnt_flags & MNT_NOEXEC)
+		goto out_path_put;
+
+	err = vfs_permission(&nd, MAY_EXEC | MAY_OPEN);
+	if (err)
+		goto out_path_put;
+
+	file = nameidata_to_filp(&nd, O_RDONLY|O_LARGEFILE);
+	if (IS_ERR(file))
+		return file;
+
+	err = deny_write_access(file);
+	if (err) {
+		fput(file);
+		goto out;
 	}
-	goto out;
-}
 
+	return file;
+
+ out_path_put:
+	release_open_intent(&nd);
+	path_put(&nd.path);
+ out:
+	return ERR_PTR(err);
+}
 EXPORT_SYMBOL(open_exec);
 
 int kernel_read(struct file *file, unsigned long offset,
@@ -724,12 +738,10 @@ static int exec_mmap(struct mm_struct *mm)
 		 * Make sure that if there is a core dump in progress
 		 * for the old mm, we get out and die instead of going
 		 * through with the exec.  We must hold mmap_sem around
-		 * checking core_waiters and changing tsk->mm.  The
-		 * core-inducing thread will increment core_waiters for
-		 * each thread whose ->mm == old_mm.
+		 * checking core_state and changing tsk->mm.
 		 */
 		down_read(&old_mm->mmap_sem);
-		if (unlikely(old_mm->core_waiters)) {
+		if (unlikely(old_mm->core_state)) {
 			up_read(&old_mm->mmap_sem);
 			return -EINTR;
 		}
@@ -1075,13 +1087,8 @@ EXPORT_SYMBOL(prepare_binprm);
 
 static int unsafe_exec(struct task_struct *p)
 {
-	int unsafe = 0;
-	if (p->ptrace & PT_PTRACED) {
-		if (p->ptrace & PT_PTRACE_CAP)
-			unsafe |= LSM_UNSAFE_PTRACE_CAP;
-		else
-			unsafe |= LSM_UNSAFE_PTRACE;
-	}
+	int unsafe = tracehook_unsafe_exec(p);
+
 	if (atomic_read(&p->fs->count) > 1 ||
 	    atomic_read(&p->files->count) > 1 ||
 	    atomic_read(&p->sighand->count) > 1)
@@ -1218,6 +1225,7 @@ int search_binary_handler(struct linux_binprm *bprm,struct pt_regs *regs)
 			read_unlock(&binfmt_lock);
 			retval = fn(bprm, regs);
 			if (retval >= 0) {
+				tracehook_report_exec(fmt, bprm, regs);
 				put_binfmt(fmt);
 				allow_write_access(bprm->file);
 				if (bprm->file)
@@ -1328,6 +1336,7 @@ int do_execve(char * filename,
 	if (retval < 0)
 		goto out;
 
+	current->flags &= ~PF_KTHREAD;
 	retval = search_binary_handler(bprm,regs);
 	if (retval >= 0) {
 		/* execve success */
@@ -1382,17 +1391,14 @@ EXPORT_SYMBOL(set_binfmt);
  * name into corename, which must have space for at least
  * CORENAME_MAX_SIZE bytes plus one byte for the zero terminator.
  */
-static int format_corename(char *corename, const char *pattern, long signr)
+static int format_corename(char *corename, int nr_threads, long signr)
 {
-	const char *pat_ptr = pattern;
+	const char *pat_ptr = core_pattern;
+	int ispipe = (*pat_ptr == '|');
 	char *out_ptr = corename;
 	char *const out_end = corename + CORENAME_MAX_SIZE;
 	int rc;
 	int pid_in_pattern = 0;
-	int ispipe = 0;
-
-	if (*pattern == '|')
-		ispipe = 1;
 
 	/* Repeat as long as we have more pattern to process and more output
 	   space */
@@ -1493,7 +1499,7 @@ static int format_corename(char *corename, const char *pattern, long signr)
 	 * and core_uses_pid is set, then .%pid will be appended to
 	 * the filename. Do not do this for piped commands. */
 	if (!ispipe && !pid_in_pattern
-            && (core_uses_pid || atomic_read(&current->mm->mm_users) != 1)) {
+	    && (core_uses_pid || nr_threads)) {
 		rc = snprintf(out_ptr, out_end - out_ptr,
 			      ".%d", task_tgid_vnr(current));
 		if (rc > out_end - out_ptr)
@@ -1505,9 +1511,10 @@ out:
 	return ispipe;
 }
 
-static void zap_process(struct task_struct *start)
+static int zap_process(struct task_struct *start)
 {
 	struct task_struct *t;
+	int nr = 0;
 
 	start->signal->flags = SIGNAL_GROUP_EXIT;
 	start->signal->group_stop_count = 0;
@@ -1515,72 +1522,99 @@ static void zap_process(struct task_struct *start)
 	t = start;
 	do {
 		if (t != current && t->mm) {
-			t->mm->core_waiters++;
 			sigaddset(&t->pending.signal, SIGKILL);
 			signal_wake_up(t, 1);
+			nr++;
 		}
-	} while ((t = next_thread(t)) != start);
+	} while_each_thread(start, t);
+
+	return nr;
 }
 
 static inline int zap_threads(struct task_struct *tsk, struct mm_struct *mm,
-				int exit_code)
+				struct core_state *core_state, int exit_code)
 {
 	struct task_struct *g, *p;
 	unsigned long flags;
-	int err = -EAGAIN;
+	int nr = -EAGAIN;
 
 	spin_lock_irq(&tsk->sighand->siglock);
 	if (!signal_group_exit(tsk->signal)) {
+		mm->core_state = core_state;
 		tsk->signal->group_exit_code = exit_code;
-		zap_process(tsk);
-		err = 0;
+		nr = zap_process(tsk);
 	}
 	spin_unlock_irq(&tsk->sighand->siglock);
-	if (err)
-		return err;
+	if (unlikely(nr < 0))
+		return nr;
 
-	if (atomic_read(&mm->mm_users) == mm->core_waiters + 1)
+	if (atomic_read(&mm->mm_users) == nr + 1)
 		goto done;
-
+	/*
+	 * We should find and kill all tasks which use this mm, and we should
+	 * count them correctly into ->nr_threads. We don't take tasklist
+	 * lock, but this is safe wrt:
+	 *
+	 * fork:
+	 *	None of sub-threads can fork after zap_process(leader). All
+	 *	processes which were created before this point should be
+	 *	visible to zap_threads() because copy_process() adds the new
+	 *	process to the tail of init_task.tasks list, and lock/unlock
+	 *	of ->siglock provides a memory barrier.
+	 *
+	 * do_exit:
+	 *	The caller holds mm->mmap_sem. This means that the task which
+	 *	uses this mm can't pass exit_mm(), so it can't exit or clear
+	 *	its ->mm.
+	 *
+	 * de_thread:
+	 *	It does list_replace_rcu(&leader->tasks, &current->tasks),
+	 *	we must see either old or new leader, this does not matter.
+	 *	However, it can change p->sighand, so lock_task_sighand(p)
+	 *	must be used. Since p->mm != NULL and we hold ->mmap_sem
+	 *	it can't fail.
+	 *
+	 *	Note also that "g" can be the old leader with ->mm == NULL
+	 *	and already unhashed and thus removed from ->thread_group.
+	 *	This is OK, __unhash_process()->list_del_rcu() does not
+	 *	clear the ->next pointer, we will find the new leader via
+	 *	next_thread().
+	 */
 	rcu_read_lock();
 	for_each_process(g) {
 		if (g == tsk->group_leader)
 			continue;
-
+		if (g->flags & PF_KTHREAD)
+			continue;
 		p = g;
 		do {
 			if (p->mm) {
-				if (p->mm == mm) {
-					/*
-					 * p->sighand can't disappear, but
-					 * may be changed by de_thread()
-					 */
+				if (unlikely(p->mm == mm)) {
 					lock_task_sighand(p, &flags);
-					zap_process(p);
+					nr += zap_process(p);
 					unlock_task_sighand(p, &flags);
 				}
 				break;
 			}
-		} while ((p = next_thread(p)) != g);
+		} while_each_thread(g, p);
 	}
 	rcu_read_unlock();
 done:
-	return mm->core_waiters;
+	atomic_set(&core_state->nr_threads, nr);
+	return nr;
 }
 
-static int coredump_wait(int exit_code)
+static int coredump_wait(int exit_code, struct core_state *core_state)
 {
 	struct task_struct *tsk = current;
 	struct mm_struct *mm = tsk->mm;
-	struct completion startup_done;
 	struct completion *vfork_done;
 	int core_waiters;
 
-	init_completion(&mm->core_done);
-	init_completion(&startup_done);
-	mm->core_startup_done = &startup_done;
-
-	core_waiters = zap_threads(tsk, mm, exit_code);
+	init_completion(&core_state->startup);
+	core_state->dumper.task = tsk;
+	core_state->dumper.next = NULL;
+	core_waiters = zap_threads(tsk, mm, core_state, exit_code);
 	up_write(&mm->mmap_sem);
 
 	if (unlikely(core_waiters < 0))
@@ -1597,12 +1631,32 @@ static int coredump_wait(int exit_code)
 	}
 
 	if (core_waiters)
-		wait_for_completion(&startup_done);
+		wait_for_completion(&core_state->startup);
 fail:
-	BUG_ON(mm->core_waiters);
 	return core_waiters;
 }
 
+static void coredump_finish(struct mm_struct *mm)
+{
+	struct core_thread *curr, *next;
+	struct task_struct *task;
+
+	next = mm->core_state->dumper.next;
+	while ((curr = next) != NULL) {
+		next = curr->next;
+		task = curr->task;
+		/*
+		 * see exit_mm(), curr->task must not see
+		 * ->task == NULL before we read ->next.
+		 */
+		smp_mb();
+		curr->task = NULL;
+		wake_up_process(task);
+	}
+
+	mm->core_state = NULL;
+}
+
 /*
  * set_dumpable converts traditional three-value dumpable to two flags and
  * stores them into mm->flags.  It modifies lower two bits of mm->flags, but
@@ -1654,6 +1708,7 @@ int get_dumpable(struct mm_struct *mm)
 
 int do_coredump(long signr, int exit_code, struct pt_regs * regs)
 {
+	struct core_state core_state;
 	char corename[CORENAME_MAX_SIZE + 1];
 	struct mm_struct *mm = current->mm;
 	struct linux_binfmt * binfmt;
@@ -1677,7 +1732,7 @@ int do_coredump(long signr, int exit_code, struct pt_regs * regs)
 	/*
 	 * If another thread got here first, or we are not dumpable, bail out.
 	 */
-	if (mm->core_waiters || !get_dumpable(mm)) {
+	if (mm->core_state || !get_dumpable(mm)) {
 		up_write(&mm->mmap_sem);
 		goto fail;
 	}
@@ -1692,7 +1747,7 @@ int do_coredump(long signr, int exit_code, struct pt_regs * regs)
 		current->fsuid = 0;	/* Dump root private */
 	}
 
-	retval = coredump_wait(exit_code);
+	retval = coredump_wait(exit_code, &core_state);
 	if (retval < 0)
 		goto fail;
 
@@ -1707,7 +1762,7 @@ int do_coredump(long signr, int exit_code, struct pt_regs * regs)
 	 * uses lock_kernel()
 	 */
  	lock_kernel();
-	ispipe = format_corename(corename, core_pattern, signr);
+	ispipe = format_corename(corename, retval, signr);
 	unlock_kernel();
 	/*
 	 * Don't bother to check the RLIMIT_CORE value if core_pattern points
@@ -1786,7 +1841,7 @@ fail_unlock:
 		argv_free(helper_argv);
 
 	current->fsuid = fsuid;
-	complete_all(&mm->core_done);
+	coredump_finish(mm);
 fail:
 	return retval;
 }
diff --git a/fs/ext2/acl.c b/fs/ext2/acl.c
index e58669e1b87c..ae8c4f850b27 100644
--- a/fs/ext2/acl.c
+++ b/fs/ext2/acl.c
@@ -294,7 +294,7 @@ ext2_check_acl(struct inode *inode, int mask)
 }
 
 int
-ext2_permission(struct inode *inode, int mask, struct nameidata *nd)
+ext2_permission(struct inode *inode, int mask)
 {
 	return generic_permission(inode, mask, ext2_check_acl);
 }
diff --git a/fs/ext2/acl.h b/fs/ext2/acl.h
index 0bde85bafe38..b42cf578554b 100644
--- a/fs/ext2/acl.h
+++ b/fs/ext2/acl.h
@@ -58,7 +58,7 @@ static inline int ext2_acl_count(size_t size)
 #define EXT2_ACL_NOT_CACHED ((void *)-1)
 
 /* acl.c */
-extern int ext2_permission (struct inode *, int, struct nameidata *);
+extern int ext2_permission (struct inode *, int);
 extern int ext2_acl_chmod (struct inode *);
 extern int ext2_init_acl (struct inode *, struct inode *);
 
diff --git a/fs/ext2/inode.c b/fs/ext2/inode.c
index 384fc0d1dd74..991d6dfeb51f 100644
--- a/fs/ext2/inode.c
+++ b/fs/ext2/inode.c
@@ -791,6 +791,7 @@ const struct address_space_operations ext2_aops = {
 	.direct_IO		= ext2_direct_IO,
 	.writepages		= ext2_writepages,
 	.migratepage		= buffer_migrate_page,
+	.is_partially_uptodate	= block_is_partially_uptodate,
 };
 
 const struct address_space_operations ext2_aops_xip = {
diff --git a/fs/ext2/super.c b/fs/ext2/super.c
index ef50cbc792db..fd88c7b43e66 100644
--- a/fs/ext2/super.c
+++ b/fs/ext2/super.c
@@ -31,6 +31,7 @@
 #include <linux/seq_file.h>
 #include <linux/mount.h>
 #include <linux/log2.h>
+#include <linux/quotaops.h>
 #include <asm/uaccess.h>
 #include "ext2.h"
 #include "xattr.h"
@@ -158,7 +159,7 @@ static void ext2_destroy_inode(struct inode *inode)
 	kmem_cache_free(ext2_inode_cachep, EXT2_I(inode));
 }
 
-static void init_once(struct kmem_cache * cachep, void *foo)
+static void init_once(void *foo)
 {
 	struct ext2_inode_info *ei = (struct ext2_inode_info *) foo;
 
diff --git a/fs/ext2/xattr_security.c b/fs/ext2/xattr_security.c
index eaa23d2d5213..70c0dbdcdcb7 100644
--- a/fs/ext2/xattr_security.c
+++ b/fs/ext2/xattr_security.c
@@ -14,7 +14,7 @@ static size_t
 ext2_xattr_security_list(struct inode *inode, char *list, size_t list_size,
 			 const char *name, size_t name_len)
 {
-	const int prefix_len = sizeof(XATTR_SECURITY_PREFIX)-1;
+	const int prefix_len = XATTR_SECURITY_PREFIX_LEN;
 	const size_t total_len = prefix_len + name_len + 1;
 
 	if (list && total_len <= list_size) {
diff --git a/fs/ext2/xattr_trusted.c b/fs/ext2/xattr_trusted.c
index 83ee149f353d..e8219f8eae9f 100644
--- a/fs/ext2/xattr_trusted.c
+++ b/fs/ext2/xattr_trusted.c
@@ -12,13 +12,11 @@
 #include <linux/ext2_fs.h>
 #include "xattr.h"
 
-#define XATTR_TRUSTED_PREFIX "trusted."
-
 static size_t
 ext2_xattr_trusted_list(struct inode *inode, char *list, size_t list_size,
 			const char *name, size_t name_len)
 {
-	const int prefix_len = sizeof(XATTR_TRUSTED_PREFIX)-1;
+	const int prefix_len = XATTR_TRUSTED_PREFIX_LEN;
 	const size_t total_len = prefix_len + name_len + 1;
 
 	if (!capable(CAP_SYS_ADMIN))
diff --git a/fs/ext2/xattr_user.c b/fs/ext2/xattr_user.c
index f383e7c3a7b5..92495d28c62f 100644
--- a/fs/ext2/xattr_user.c
+++ b/fs/ext2/xattr_user.c
@@ -11,13 +11,11 @@
 #include "ext2.h"
 #include "xattr.h"
 
-#define XATTR_USER_PREFIX "user."
-
 static size_t
 ext2_xattr_user_list(struct inode *inode, char *list, size_t list_size,
 		     const char *name, size_t name_len)
 {
-	const size_t prefix_len = sizeof(XATTR_USER_PREFIX)-1;
+	const size_t prefix_len = XATTR_USER_PREFIX_LEN;
 	const size_t total_len = prefix_len + name_len + 1;
 
 	if (!test_opt(inode->i_sb, XATTR_USER))
diff --git a/fs/ext3/acl.c b/fs/ext3/acl.c
index a754d1848173..b60bb241880c 100644
--- a/fs/ext3/acl.c
+++ b/fs/ext3/acl.c
@@ -299,7 +299,7 @@ ext3_check_acl(struct inode *inode, int mask)
 }
 
 int
-ext3_permission(struct inode *inode, int mask, struct nameidata *nd)
+ext3_permission(struct inode *inode, int mask)
 {
 	return generic_permission(inode, mask, ext3_check_acl);
 }
diff --git a/fs/ext3/acl.h b/fs/ext3/acl.h
index 0d1e6279cbfd..42da16b8cac0 100644
--- a/fs/ext3/acl.h
+++ b/fs/ext3/acl.h
@@ -58,7 +58,7 @@ static inline int ext3_acl_count(size_t size)
 #define EXT3_ACL_NOT_CACHED ((void *)-1)
 
 /* acl.c */
-extern int ext3_permission (struct inode *, int, struct nameidata *);
+extern int ext3_permission (struct inode *, int);
 extern int ext3_acl_chmod (struct inode *);
 extern int ext3_init_acl (handle_t *, struct inode *, struct inode *);
 
diff --git a/fs/ext3/dir.c b/fs/ext3/dir.c
index 8ca3bfd72427..2eea96ec78ed 100644
--- a/fs/ext3/dir.c
+++ b/fs/ext3/dir.c
@@ -272,7 +272,7 @@ static void free_rb_tree_fname(struct rb_root *root)
 
 	while (n) {
 		/* Do the node's children first */
-		if ((n)->rb_left) {
+		if (n->rb_left) {
 			n = n->rb_left;
 			continue;
 		}
@@ -301,24 +301,18 @@ static void free_rb_tree_fname(struct rb_root *root)
 			parent->rb_right = NULL;
 		n = parent;
 	}
-	root->rb_node = NULL;
 }
 
 
-static struct dir_private_info *create_dir_info(loff_t pos)
+static struct dir_private_info *ext3_htree_create_dir_info(loff_t pos)
 {
 	struct dir_private_info *p;
 
-	p = kmalloc(sizeof(struct dir_private_info), GFP_KERNEL);
+	p = kzalloc(sizeof(struct dir_private_info), GFP_KERNEL);
 	if (!p)
 		return NULL;
-	p->root.rb_node = NULL;
-	p->curr_node = NULL;
-	p->extra_fname = NULL;
-	p->last_pos = 0;
 	p->curr_hash = pos2maj_hash(pos);
 	p->curr_minor_hash = pos2min_hash(pos);
-	p->next_hash = 0;
 	return p;
 }
 
@@ -433,7 +427,7 @@ static int ext3_dx_readdir(struct file * filp,
 	int	ret;
 
 	if (!info) {
-		info = create_dir_info(filp->f_pos);
+		info = ext3_htree_create_dir_info(filp->f_pos);
 		if (!info)
 			return -ENOMEM;
 		filp->private_data = info;
diff --git a/fs/ext3/ialloc.c b/fs/ext3/ialloc.c
index 77126821b2e9..47b678d73e7a 100644
--- a/fs/ext3/ialloc.c
+++ b/fs/ext3/ialloc.c
@@ -669,6 +669,14 @@ struct inode *ext3_orphan_get(struct super_block *sb, unsigned long ino)
 	if (IS_ERR(inode))
 		goto iget_failed;
 
+	/*
+	 * If the orphans has i_nlinks > 0 then it should be able to be
+	 * truncated, otherwise it won't be removed from the orphan list
+	 * during processing and an infinite loop will result.
+	 */
+	if (inode->i_nlink && !ext3_can_truncate(inode))
+		goto bad_orphan;
+
 	if (NEXT_ORPHAN(inode) > max_ino)
 		goto bad_orphan;
 	brelse(bitmap_bh);
@@ -690,6 +698,7 @@ bad_orphan:
 		printk(KERN_NOTICE "NEXT_ORPHAN(inode)=%u\n",
 		       NEXT_ORPHAN(inode));
 		printk(KERN_NOTICE "max_ino=%lu\n", max_ino);
+		printk(KERN_NOTICE "i_nlink=%u\n", inode->i_nlink);
 		/* Avoid freeing blocks if we got a bad deleted inode */
 		if (inode->i_nlink == 0)
 			inode->i_blocks = 0;
diff --git a/fs/ext3/inode.c b/fs/ext3/inode.c
index 6ae4ecf3ce40..507d8689b111 100644
--- a/fs/ext3/inode.c
+++ b/fs/ext3/inode.c
@@ -1767,44 +1767,47 @@ static int ext3_journalled_set_page_dirty(struct page *page)
 }
 
 static const struct address_space_operations ext3_ordered_aops = {
-	.readpage	= ext3_readpage,
-	.readpages	= ext3_readpages,
-	.writepage	= ext3_ordered_writepage,
-	.sync_page	= block_sync_page,
-	.write_begin	= ext3_write_begin,
-	.write_end	= ext3_ordered_write_end,
-	.bmap		= ext3_bmap,
-	.invalidatepage	= ext3_invalidatepage,
-	.releasepage	= ext3_releasepage,
-	.direct_IO	= ext3_direct_IO,
-	.migratepage	= buffer_migrate_page,
+	.readpage		= ext3_readpage,
+	.readpages		= ext3_readpages,
+	.writepage		= ext3_ordered_writepage,
+	.sync_page		= block_sync_page,
+	.write_begin		= ext3_write_begin,
+	.write_end		= ext3_ordered_write_end,
+	.bmap			= ext3_bmap,
+	.invalidatepage		= ext3_invalidatepage,
+	.releasepage		= ext3_releasepage,
+	.direct_IO		= ext3_direct_IO,
+	.migratepage		= buffer_migrate_page,
+	.is_partially_uptodate  = block_is_partially_uptodate,
 };
 
 static const struct address_space_operations ext3_writeback_aops = {
-	.readpage	= ext3_readpage,
-	.readpages	= ext3_readpages,
-	.writepage	= ext3_writeback_writepage,
-	.sync_page	= block_sync_page,
-	.write_begin	= ext3_write_begin,
-	.write_end	= ext3_writeback_write_end,
-	.bmap		= ext3_bmap,
-	.invalidatepage	= ext3_invalidatepage,
-	.releasepage	= ext3_releasepage,
-	.direct_IO	= ext3_direct_IO,
-	.migratepage	= buffer_migrate_page,
+	.readpage		= ext3_readpage,
+	.readpages		= ext3_readpages,
+	.writepage		= ext3_writeback_writepage,
+	.sync_page		= block_sync_page,
+	.write_begin		= ext3_write_begin,
+	.write_end		= ext3_writeback_write_end,
+	.bmap			= ext3_bmap,
+	.invalidatepage		= ext3_invalidatepage,
+	.releasepage		= ext3_releasepage,
+	.direct_IO		= ext3_direct_IO,
+	.migratepage		= buffer_migrate_page,
+	.is_partially_uptodate  = block_is_partially_uptodate,
 };
 
 static const struct address_space_operations ext3_journalled_aops = {
-	.readpage	= ext3_readpage,
-	.readpages	= ext3_readpages,
-	.writepage	= ext3_journalled_writepage,
-	.sync_page	= block_sync_page,
-	.write_begin	= ext3_write_begin,
-	.write_end	= ext3_journalled_write_end,
-	.set_page_dirty	= ext3_journalled_set_page_dirty,
-	.bmap		= ext3_bmap,
-	.invalidatepage	= ext3_invalidatepage,
-	.releasepage	= ext3_releasepage,
+	.readpage		= ext3_readpage,
+	.readpages		= ext3_readpages,
+	.writepage		= ext3_journalled_writepage,
+	.sync_page		= block_sync_page,
+	.write_begin		= ext3_write_begin,
+	.write_end		= ext3_journalled_write_end,
+	.set_page_dirty		= ext3_journalled_set_page_dirty,
+	.bmap			= ext3_bmap,
+	.invalidatepage		= ext3_invalidatepage,
+	.releasepage		= ext3_releasepage,
+	.is_partially_uptodate  = block_is_partially_uptodate,
 };
 
 void ext3_set_aops(struct inode *inode)
@@ -2127,7 +2130,21 @@ static void ext3_free_data(handle_t *handle, struct inode *inode,
 
 	if (this_bh) {
 		BUFFER_TRACE(this_bh, "call ext3_journal_dirty_metadata");
-		ext3_journal_dirty_metadata(handle, this_bh);
+
+		/*
+		 * The buffer head should have an attached journal head at this
+		 * point. However, if the data is corrupted and an indirect
+		 * block pointed to itself, it would have been detached when
+		 * the block was cleared. Check for this instead of OOPSing.
+		 */
+		if (bh2jh(this_bh))
+			ext3_journal_dirty_metadata(handle, this_bh);
+		else
+			ext3_error(inode->i_sb, "ext3_free_data",
+				   "circular indirect block detected, "
+				   "inode=%lu, block=%llu",
+				   inode->i_ino,
+				   (unsigned long long)this_bh->b_blocknr);
 	}
 }
 
@@ -2253,6 +2270,19 @@ static void ext3_free_branches(handle_t *handle, struct inode *inode,
 	}
 }
 
+int ext3_can_truncate(struct inode *inode)
+{
+	if (IS_APPEND(inode) || IS_IMMUTABLE(inode))
+		return 0;
+	if (S_ISREG(inode->i_mode))
+		return 1;
+	if (S_ISDIR(inode->i_mode))
+		return 1;
+	if (S_ISLNK(inode->i_mode))
+		return !ext3_inode_is_fast_symlink(inode);
+	return 0;
+}
+
 /*
  * ext3_truncate()
  *
@@ -2297,12 +2327,7 @@ void ext3_truncate(struct inode *inode)
 	unsigned blocksize = inode->i_sb->s_blocksize;
 	struct page *page;
 
-	if (!(S_ISREG(inode->i_mode) || S_ISDIR(inode->i_mode) ||
-	    S_ISLNK(inode->i_mode)))
-		return;
-	if (ext3_inode_is_fast_symlink(inode))
-		return;
-	if (IS_APPEND(inode) || IS_IMMUTABLE(inode))
+	if (!ext3_can_truncate(inode))
 		return;
 
 	/*
@@ -2513,6 +2538,16 @@ static int __ext3_get_inode_loc(struct inode *inode,
 	}
 	if (!buffer_uptodate(bh)) {
 		lock_buffer(bh);
+
+		/*
+		 * If the buffer has the write error flag, we have failed
+		 * to write out another inode in the same block.  In this
+		 * case, we don't have to read the block because we may
+		 * read the old inode data successfully.
+		 */
+		if (buffer_write_io_error(bh) && !buffer_uptodate(bh))
+			set_buffer_uptodate(bh);
+
 		if (buffer_uptodate(bh)) {
 			/* someone brought it uptodate while we waited */
 			unlock_buffer(bh);
diff --git a/fs/ext3/namei.c b/fs/ext3/namei.c
index 0b8cf80154f1..de13e919cd81 100644
--- a/fs/ext3/namei.c
+++ b/fs/ext3/namei.c
@@ -240,13 +240,13 @@ static inline unsigned dx_root_limit (struct inode *dir, unsigned infosize)
 {
 	unsigned entry_space = dir->i_sb->s_blocksize - EXT3_DIR_REC_LEN(1) -
 		EXT3_DIR_REC_LEN(2) - infosize;
-	return 0? 20: entry_space / sizeof(struct dx_entry);
+	return entry_space / sizeof(struct dx_entry);
 }
 
 static inline unsigned dx_node_limit (struct inode *dir)
 {
 	unsigned entry_space = dir->i_sb->s_blocksize - EXT3_DIR_REC_LEN(0);
-	return 0? 22: entry_space / sizeof(struct dx_entry);
+	return entry_space / sizeof(struct dx_entry);
 }
 
 /*
@@ -991,19 +991,21 @@ static struct buffer_head * ext3_dx_find_entry(struct dentry *dentry,
 		de = (struct ext3_dir_entry_2 *) bh->b_data;
 		top = (struct ext3_dir_entry_2 *) ((char *) de + sb->s_blocksize -
 				       EXT3_DIR_REC_LEN(0));
-		for (; de < top; de = ext3_next_entry(de))
-		if (ext3_match (namelen, name, de)) {
-			if (!ext3_check_dir_entry("ext3_find_entry",
-						  dir, de, bh,
-				  (block<<EXT3_BLOCK_SIZE_BITS(sb))
-					  +((char *)de - bh->b_data))) {
-				brelse (bh);
+		for (; de < top; de = ext3_next_entry(de)) {
+			int off = (block << EXT3_BLOCK_SIZE_BITS(sb))
+				  + ((char *) de - bh->b_data);
+
+			if (!ext3_check_dir_entry(__func__, dir, de, bh, off)) {
+				brelse(bh);
 				*err = ERR_BAD_DX_DIR;
 				goto errout;
 			}
-			*res_dir = de;
-			dx_release (frames);
-			return bh;
+
+			if (ext3_match(namelen, name, de)) {
+				*res_dir = de;
+				dx_release(frames);
+				return bh;
+			}
 		}
 		brelse (bh);
 		/* Check to see if we should continue to search */
diff --git a/fs/ext3/super.c b/fs/ext3/super.c
index 2845425077e8..f38a5afc39a1 100644
--- a/fs/ext3/super.c
+++ b/fs/ext3/super.c
@@ -472,7 +472,7 @@ static void ext3_destroy_inode(struct inode *inode)
 	kmem_cache_free(ext3_inode_cachep, EXT3_I(inode));
 }
 
-static void init_once(struct kmem_cache * cachep, void *foo)
+static void init_once(void *foo)
 {
 	struct ext3_inode_info *ei = (struct ext3_inode_info *) foo;
 
@@ -842,7 +842,7 @@ static int parse_options (char *options, struct super_block *sb,
 	int data_opt = 0;
 	int option;
 #ifdef CONFIG_QUOTA
-	int qtype;
+	int qtype, qfmt;
 	char *qname;
 #endif
 
@@ -1018,9 +1018,11 @@ static int parse_options (char *options, struct super_block *sb,
 		case Opt_grpjquota:
 			qtype = GRPQUOTA;
 set_qf_name:
-			if (sb_any_quota_enabled(sb)) {
+			if ((sb_any_quota_enabled(sb) ||
+			     sb_any_quota_suspended(sb)) &&
+			    !sbi->s_qf_names[qtype]) {
 				printk(KERN_ERR
-					"EXT3-fs: Cannot change journalled "
+					"EXT3-fs: Cannot change journaled "
 					"quota options when quota turned on.\n");
 				return 0;
 			}
@@ -1056,9 +1058,11 @@ set_qf_name:
 		case Opt_offgrpjquota:
 			qtype = GRPQUOTA;
 clear_qf_name:
-			if (sb_any_quota_enabled(sb)) {
+			if ((sb_any_quota_enabled(sb) ||
+			     sb_any_quota_suspended(sb)) &&
+			    sbi->s_qf_names[qtype]) {
 				printk(KERN_ERR "EXT3-fs: Cannot change "
-					"journalled quota options when "
+					"journaled quota options when "
 					"quota turned on.\n");
 				return 0;
 			}
@@ -1069,10 +1073,20 @@ clear_qf_name:
 			sbi->s_qf_names[qtype] = NULL;
 			break;
 		case Opt_jqfmt_vfsold:
-			sbi->s_jquota_fmt = QFMT_VFS_OLD;
-			break;
+			qfmt = QFMT_VFS_OLD;
+			goto set_qf_format;
 		case Opt_jqfmt_vfsv0:
-			sbi->s_jquota_fmt = QFMT_VFS_V0;
+			qfmt = QFMT_VFS_V0;
+set_qf_format:
+			if ((sb_any_quota_enabled(sb) ||
+			     sb_any_quota_suspended(sb)) &&
+			    sbi->s_jquota_fmt != qfmt) {
+				printk(KERN_ERR "EXT3-fs: Cannot change "
+					"journaled quota options when "
+					"quota turned on.\n");
+				return 0;
+			}
+			sbi->s_jquota_fmt = qfmt;
 			break;
 		case Opt_quota:
 		case Opt_usrquota:
@@ -1084,7 +1098,8 @@ clear_qf_name:
 			set_opt(sbi->s_mount_opt, GRPQUOTA);
 			break;
 		case Opt_noquota:
-			if (sb_any_quota_enabled(sb)) {
+			if (sb_any_quota_enabled(sb) ||
+			    sb_any_quota_suspended(sb)) {
 				printk(KERN_ERR "EXT3-fs: Cannot change quota "
 					"options when quota turned on.\n");
 				return 0;
@@ -1169,14 +1184,14 @@ clear_qf_name:
 		}
 
 		if (!sbi->s_jquota_fmt) {
-			printk(KERN_ERR "EXT3-fs: journalled quota format "
+			printk(KERN_ERR "EXT3-fs: journaled quota format "
 					"not specified.\n");
 			return 0;
 		}
 	} else {
 		if (sbi->s_jquota_fmt) {
-			printk(KERN_ERR "EXT3-fs: journalled quota format "
-					"specified with no journalling "
+			printk(KERN_ERR "EXT3-fs: journaled quota format "
+					"specified with no journaling "
 					"enabled.\n");
 			return 0;
 		}
@@ -1370,7 +1385,7 @@ static void ext3_orphan_cleanup (struct super_block * sb,
 			int ret = ext3_quota_on_mount(sb, i);
 			if (ret < 0)
 				printk(KERN_ERR
-					"EXT3-fs: Cannot turn on journalled "
+					"EXT3-fs: Cannot turn on journaled "
 					"quota: error %d\n", ret);
 		}
 	}
@@ -2712,7 +2727,7 @@ static int ext3_release_dquot(struct dquot *dquot)
 
 static int ext3_mark_dquot_dirty(struct dquot *dquot)
 {
-	/* Are we journalling quotas? */
+	/* Are we journaling quotas? */
 	if (EXT3_SB(dquot->dq_sb)->s_qf_names[USRQUOTA] ||
 	    EXT3_SB(dquot->dq_sb)->s_qf_names[GRPQUOTA]) {
 		dquot_mark_dquot_dirty(dquot);
@@ -2759,25 +2774,45 @@ static int ext3_quota_on(struct super_block *sb, int type, int format_id,
 
 	if (!test_opt(sb, QUOTA))
 		return -EINVAL;
-	/* Not journalling quota or remount? */
-	if ((!EXT3_SB(sb)->s_qf_names[USRQUOTA] &&
-	    !EXT3_SB(sb)->s_qf_names[GRPQUOTA]) || remount)
+	/* When remounting, no checks are needed and in fact, path is NULL */
+	if (remount)
 		return vfs_quota_on(sb, type, format_id, path, remount);
+
 	err = path_lookup(path, LOOKUP_FOLLOW, &nd);
 	if (err)
 		return err;
+
 	/* Quotafile not on the same filesystem? */
 	if (nd.path.mnt->mnt_sb != sb) {
 		path_put(&nd.path);
 		return -EXDEV;
 	}
-	/* Quotafile not in fs root? */
-	if (nd.path.dentry->d_parent->d_inode != sb->s_root->d_inode)
-		printk(KERN_WARNING
-			"EXT3-fs: Quota file not on filesystem root. "
-			"Journalled quota will not work.\n");
+	/* Journaling quota? */
+	if (EXT3_SB(sb)->s_qf_names[type]) {
+		/* Quotafile not of fs root? */
+		if (nd.path.dentry->d_parent->d_inode != sb->s_root->d_inode)
+			printk(KERN_WARNING
+				"EXT3-fs: Quota file not on filesystem root. "
+				"Journaled quota will not work.\n");
+	}
+
+	/*
+	 * When we journal data on quota file, we have to flush journal to see
+	 * all updates to the file when we bypass pagecache...
+	 */
+	if (ext3_should_journal_data(nd.path.dentry->d_inode)) {
+		/*
+		 * We don't need to lock updates but journal_flush() could
+		 * otherwise be livelocked...
+		 */
+		journal_lock_updates(EXT3_SB(sb)->s_journal);
+		journal_flush(EXT3_SB(sb)->s_journal);
+		journal_unlock_updates(EXT3_SB(sb)->s_journal);
+	}
+
+	err = vfs_quota_on_path(sb, type, format_id, &nd.path);
 	path_put(&nd.path);
-	return vfs_quota_on(sb, type, format_id, path, remount);
+	return err;
 }
 
 /* Read data from quotafile - avoid pagecache and such because we cannot afford
diff --git a/fs/ext3/xattr_security.c b/fs/ext3/xattr_security.c
index 821efaf2b94e..37b81097bdf2 100644
--- a/fs/ext3/xattr_security.c
+++ b/fs/ext3/xattr_security.c
@@ -15,7 +15,7 @@ static size_t
 ext3_xattr_security_list(struct inode *inode, char *list, size_t list_size,
 			 const char *name, size_t name_len)
 {
-	const size_t prefix_len = sizeof(XATTR_SECURITY_PREFIX)-1;
+	const size_t prefix_len = XATTR_SECURITY_PREFIX_LEN;
 	const size_t total_len = prefix_len + name_len + 1;
 
 
diff --git a/fs/ext3/xattr_trusted.c b/fs/ext3/xattr_trusted.c
index 0327497a55ce..c7c41a410c4b 100644
--- a/fs/ext3/xattr_trusted.c
+++ b/fs/ext3/xattr_trusted.c
@@ -13,13 +13,11 @@
 #include <linux/ext3_fs.h>
 #include "xattr.h"
 
-#define XATTR_TRUSTED_PREFIX "trusted."
-
 static size_t
 ext3_xattr_trusted_list(struct inode *inode, char *list, size_t list_size,
 			const char *name, size_t name_len)
 {
-	const size_t prefix_len = sizeof(XATTR_TRUSTED_PREFIX)-1;
+	const size_t prefix_len = XATTR_TRUSTED_PREFIX_LEN;
 	const size_t total_len = prefix_len + name_len + 1;
 
 	if (!capable(CAP_SYS_ADMIN))
diff --git a/fs/ext3/xattr_user.c b/fs/ext3/xattr_user.c
index 1abd8f92c440..430fe63b31b3 100644
--- a/fs/ext3/xattr_user.c
+++ b/fs/ext3/xattr_user.c
@@ -12,13 +12,11 @@
 #include <linux/ext3_fs.h>
 #include "xattr.h"
 
-#define XATTR_USER_PREFIX "user."
-
 static size_t
 ext3_xattr_user_list(struct inode *inode, char *list, size_t list_size,
 		     const char *name, size_t name_len)
 {
-	const size_t prefix_len = sizeof(XATTR_USER_PREFIX)-1;
+	const size_t prefix_len = XATTR_USER_PREFIX_LEN;
 	const size_t total_len = prefix_len + name_len + 1;
 
 	if (!test_opt(inode->i_sb, XATTR_USER))
diff --git a/fs/ext4/acl.c b/fs/ext4/acl.c
index 3c8dab880d91..694ed6fadcc8 100644
--- a/fs/ext4/acl.c
+++ b/fs/ext4/acl.c
@@ -40,34 +40,35 @@ ext4_acl_from_disk(const void *value, size_t size)
 	acl = posix_acl_alloc(count, GFP_NOFS);
 	if (!acl)
 		return ERR_PTR(-ENOMEM);
-	for (n=0; n < count; n++) {
+	for (n = 0; n < count; n++) {
 		ext4_acl_entry *entry =
 			(ext4_acl_entry *)value;
 		if ((char *)value + sizeof(ext4_acl_entry_short) > end)
 			goto fail;
 		acl->a_entries[n].e_tag  = le16_to_cpu(entry->e_tag);
 		acl->a_entries[n].e_perm = le16_to_cpu(entry->e_perm);
-		switch(acl->a_entries[n].e_tag) {
-			case ACL_USER_OBJ:
-			case ACL_GROUP_OBJ:
-			case ACL_MASK:
-			case ACL_OTHER:
-				value = (char *)value +
-					sizeof(ext4_acl_entry_short);
-				acl->a_entries[n].e_id = ACL_UNDEFINED_ID;
-				break;
-
-			case ACL_USER:
-			case ACL_GROUP:
-				value = (char *)value + sizeof(ext4_acl_entry);
-				if ((char *)value > end)
-					goto fail;
-				acl->a_entries[n].e_id =
-					le32_to_cpu(entry->e_id);
-				break;
-
-			default:
+
+		switch (acl->a_entries[n].e_tag) {
+		case ACL_USER_OBJ:
+		case ACL_GROUP_OBJ:
+		case ACL_MASK:
+		case ACL_OTHER:
+			value = (char *)value +
+				sizeof(ext4_acl_entry_short);
+			acl->a_entries[n].e_id = ACL_UNDEFINED_ID;
+			break;
+
+		case ACL_USER:
+		case ACL_GROUP:
+			value = (char *)value + sizeof(ext4_acl_entry);
+			if ((char *)value > end)
 				goto fail;
+			acl->a_entries[n].e_id =
+				le32_to_cpu(entry->e_id);
+			break;
+
+		default:
+			goto fail;
 		}
 	}
 	if (value != end)
@@ -96,27 +97,26 @@ ext4_acl_to_disk(const struct posix_acl *acl, size_t *size)
 		return ERR_PTR(-ENOMEM);
 	ext_acl->a_version = cpu_to_le32(EXT4_ACL_VERSION);
 	e = (char *)ext_acl + sizeof(ext4_acl_header);
-	for (n=0; n < acl->a_count; n++) {
+	for (n = 0; n < acl->a_count; n++) {
 		ext4_acl_entry *entry = (ext4_acl_entry *)e;
 		entry->e_tag  = cpu_to_le16(acl->a_entries[n].e_tag);
 		entry->e_perm = cpu_to_le16(acl->a_entries[n].e_perm);
-		switch(acl->a_entries[n].e_tag) {
-			case ACL_USER:
-			case ACL_GROUP:
-				entry->e_id =
-					cpu_to_le32(acl->a_entries[n].e_id);
-				e += sizeof(ext4_acl_entry);
-				break;
-
-			case ACL_USER_OBJ:
-			case ACL_GROUP_OBJ:
-			case ACL_MASK:
-			case ACL_OTHER:
-				e += sizeof(ext4_acl_entry_short);
-				break;
-
-			default:
-				goto fail;
+		switch (acl->a_entries[n].e_tag) {
+		case ACL_USER:
+		case ACL_GROUP:
+			entry->e_id = cpu_to_le32(acl->a_entries[n].e_id);
+			e += sizeof(ext4_acl_entry);
+			break;
+
+		case ACL_USER_OBJ:
+		case ACL_GROUP_OBJ:
+		case ACL_MASK:
+		case ACL_OTHER:
+			e += sizeof(ext4_acl_entry_short);
+			break;
+
+		default:
+			goto fail;
 		}
 	}
 	return (char *)ext_acl;
@@ -167,23 +167,23 @@ ext4_get_acl(struct inode *inode, int type)
 	if (!test_opt(inode->i_sb, POSIX_ACL))
 		return NULL;
 
-	switch(type) {
-		case ACL_TYPE_ACCESS:
-			acl = ext4_iget_acl(inode, &ei->i_acl);
-			if (acl != EXT4_ACL_NOT_CACHED)
-				return acl;
-			name_index = EXT4_XATTR_INDEX_POSIX_ACL_ACCESS;
-			break;
-
-		case ACL_TYPE_DEFAULT:
-			acl = ext4_iget_acl(inode, &ei->i_default_acl);
-			if (acl != EXT4_ACL_NOT_CACHED)
-				return acl;
-			name_index = EXT4_XATTR_INDEX_POSIX_ACL_DEFAULT;
-			break;
-
-		default:
-			return ERR_PTR(-EINVAL);
+	switch (type) {
+	case ACL_TYPE_ACCESS:
+		acl = ext4_iget_acl(inode, &ei->i_acl);
+		if (acl != EXT4_ACL_NOT_CACHED)
+			return acl;
+		name_index = EXT4_XATTR_INDEX_POSIX_ACL_ACCESS;
+		break;
+
+	case ACL_TYPE_DEFAULT:
+		acl = ext4_iget_acl(inode, &ei->i_default_acl);
+		if (acl != EXT4_ACL_NOT_CACHED)
+			return acl;
+		name_index = EXT4_XATTR_INDEX_POSIX_ACL_DEFAULT;
+		break;
+
+	default:
+		return ERR_PTR(-EINVAL);
 	}
 	retval = ext4_xattr_get(inode, name_index, "", NULL, 0);
 	if (retval > 0) {
@@ -201,14 +201,14 @@ ext4_get_acl(struct inode *inode, int type)
 	kfree(value);
 
 	if (!IS_ERR(acl)) {
-		switch(type) {
-			case ACL_TYPE_ACCESS:
-				ext4_iset_acl(inode, &ei->i_acl, acl);
-				break;
-
-			case ACL_TYPE_DEFAULT:
-				ext4_iset_acl(inode, &ei->i_default_acl, acl);
-				break;
+		switch (type) {
+		case ACL_TYPE_ACCESS:
+			ext4_iset_acl(inode, &ei->i_acl, acl);
+			break;
+
+		case ACL_TYPE_DEFAULT:
+			ext4_iset_acl(inode, &ei->i_default_acl, acl);
+			break;
 		}
 	}
 	return acl;
@@ -232,31 +232,31 @@ ext4_set_acl(handle_t *handle, struct inode *inode, int type,
 	if (S_ISLNK(inode->i_mode))
 		return -EOPNOTSUPP;
 
-	switch(type) {
-		case ACL_TYPE_ACCESS:
-			name_index = EXT4_XATTR_INDEX_POSIX_ACL_ACCESS;
-			if (acl) {
-				mode_t mode = inode->i_mode;
-				error = posix_acl_equiv_mode(acl, &mode);
-				if (error < 0)
-					return error;
-				else {
-					inode->i_mode = mode;
-					ext4_mark_inode_dirty(handle, inode);
-					if (error == 0)
-						acl = NULL;
-				}
+	switch (type) {
+	case ACL_TYPE_ACCESS:
+		name_index = EXT4_XATTR_INDEX_POSIX_ACL_ACCESS;
+		if (acl) {
+			mode_t mode = inode->i_mode;
+			error = posix_acl_equiv_mode(acl, &mode);
+			if (error < 0)
+				return error;
+			else {
+				inode->i_mode = mode;
+				ext4_mark_inode_dirty(handle, inode);
+				if (error == 0)
+					acl = NULL;
 			}
-			break;
+		}
+		break;
 
-		case ACL_TYPE_DEFAULT:
-			name_index = EXT4_XATTR_INDEX_POSIX_ACL_DEFAULT;
-			if (!S_ISDIR(inode->i_mode))
-				return acl ? -EACCES : 0;
-			break;
+	case ACL_TYPE_DEFAULT:
+		name_index = EXT4_XATTR_INDEX_POSIX_ACL_DEFAULT;
+		if (!S_ISDIR(inode->i_mode))
+			return acl ? -EACCES : 0;
+		break;
 
-		default:
-			return -EINVAL;
+	default:
+		return -EINVAL;
 	}
 	if (acl) {
 		value = ext4_acl_to_disk(acl, &size);
@@ -269,14 +269,14 @@ ext4_set_acl(handle_t *handle, struct inode *inode, int type,
 
 	kfree(value);
 	if (!error) {
-		switch(type) {
-			case ACL_TYPE_ACCESS:
-				ext4_iset_acl(inode, &ei->i_acl, acl);
-				break;
-
-			case ACL_TYPE_DEFAULT:
-				ext4_iset_acl(inode, &ei->i_default_acl, acl);
-				break;
+		switch (type) {
+		case ACL_TYPE_ACCESS:
+			ext4_iset_acl(inode, &ei->i_acl, acl);
+			break;
+
+		case ACL_TYPE_DEFAULT:
+			ext4_iset_acl(inode, &ei->i_default_acl, acl);
+			break;
 		}
 	}
 	return error;
@@ -299,7 +299,7 @@ ext4_check_acl(struct inode *inode, int mask)
 }
 
 int
-ext4_permission(struct inode *inode, int mask, struct nameidata *nd)
+ext4_permission(struct inode *inode, int mask)
 {
 	return generic_permission(inode, mask, ext4_check_acl);
 }
diff --git a/fs/ext4/acl.h b/fs/ext4/acl.h
index 26a5c1abf147..cd2b855a07d6 100644
--- a/fs/ext4/acl.h
+++ b/fs/ext4/acl.h
@@ -58,7 +58,7 @@ static inline int ext4_acl_count(size_t size)
 #define EXT4_ACL_NOT_CACHED ((void *)-1)
 
 /* acl.c */
-extern int ext4_permission (struct inode *, int, struct nameidata *);
+extern int ext4_permission (struct inode *, int);
 extern int ext4_acl_chmod (struct inode *);
 extern int ext4_init_acl (handle_t *, struct inode *, struct inode *);
 
diff --git a/fs/ext4/balloc.c b/fs/ext4/balloc.c
index 495ab21b9832..e9fa960ba6da 100644
--- a/fs/ext4/balloc.c
+++ b/fs/ext4/balloc.c
@@ -314,25 +314,28 @@ ext4_read_block_bitmap(struct super_block *sb, ext4_group_t block_group)
 	if (unlikely(!bh)) {
 		ext4_error(sb, __func__,
 			    "Cannot read block bitmap - "
-			    "block_group = %d, block_bitmap = %llu",
-			    (int)block_group, (unsigned long long)bitmap_blk);
+			    "block_group = %lu, block_bitmap = %llu",
+			    block_group, bitmap_blk);
 		return NULL;
 	}
 	if (bh_uptodate_or_lock(bh))
 		return bh;
 
+	spin_lock(sb_bgl_lock(EXT4_SB(sb), block_group));
 	if (desc->bg_flags & cpu_to_le16(EXT4_BG_BLOCK_UNINIT)) {
 		ext4_init_block_bitmap(sb, bh, block_group, desc);
 		set_buffer_uptodate(bh);
 		unlock_buffer(bh);
+		spin_unlock(sb_bgl_lock(EXT4_SB(sb), block_group));
 		return bh;
 	}
+	spin_unlock(sb_bgl_lock(EXT4_SB(sb), block_group));
 	if (bh_submit_read(bh) < 0) {
 		put_bh(bh);
 		ext4_error(sb, __func__,
 			    "Cannot read block bitmap - "
-			    "block_group = %d, block_bitmap = %llu",
-			    (int)block_group, (unsigned long long)bitmap_blk);
+			    "block_group = %lu, block_bitmap = %llu",
+			    block_group, bitmap_blk);
 		return NULL;
 	}
 	ext4_valid_block_bitmap(sb, desc, block_group, bh);
@@ -1623,6 +1626,9 @@ ext4_fsblk_t ext4_has_free_blocks(struct ext4_sb_info *sbi,
 		free_blocks =
 			percpu_counter_sum_and_set(&sbi->s_freeblocks_counter);
 #endif
+	if (free_blocks <= root_blocks)
+		/* we don't have free space */
+		return 0;
 	if (free_blocks - root_blocks < nblocks)
 		return free_blocks - root_blocks;
 	return nblocks;
diff --git a/fs/ext4/dir.c b/fs/ext4/dir.c
index d3d23d73c08b..ec8e33b45219 100644
--- a/fs/ext4/dir.c
+++ b/fs/ext4/dir.c
@@ -411,7 +411,7 @@ static int call_filldir(struct file * filp, void * dirent,
 				get_dtype(sb, fname->file_type));
 		if (error) {
 			filp->f_pos = curr_pos;
-			info->extra_fname = fname->next;
+			info->extra_fname = fname;
 			return error;
 		}
 		fname = fname->next;
@@ -450,11 +450,21 @@ static int ext4_dx_readdir(struct file * filp,
 	 * If there are any leftover names on the hash collision
 	 * chain, return them first.
 	 */
-	if (info->extra_fname &&
-	    call_filldir(filp, dirent, filldir, info->extra_fname))
-		goto finished;
+	if (info->extra_fname) {
+		if (call_filldir(filp, dirent, filldir, info->extra_fname))
+			goto finished;
 
-	if (!info->curr_node)
+		info->extra_fname = NULL;
+		info->curr_node = rb_next(info->curr_node);
+		if (!info->curr_node) {
+			if (info->next_hash == ~0) {
+				filp->f_pos = EXT4_HTREE_EOF;
+				goto finished;
+			}
+			info->curr_hash = info->next_hash;
+			info->curr_minor_hash = 0;
+		}
+	} else if (!info->curr_node)
 		info->curr_node = rb_first(&info->root);
 
 	while (1) {
diff --git a/fs/ext4/ext4.h b/fs/ext4/ext4.h
index 303e41cf7b14..295003241d3d 100644
--- a/fs/ext4/ext4.h
+++ b/fs/ext4/ext4.h
@@ -1044,7 +1044,6 @@ extern void ext4_mb_update_group_info(struct ext4_group_info *grp,
 
 
 /* inode.c */
-void ext4_da_release_space(struct inode *inode, int used, int to_free);
 int ext4_forget(handle_t *handle, int is_metadata, struct inode *inode,
 		struct buffer_head *bh, ext4_fsblk_t blocknr);
 struct buffer_head *ext4_getblk(handle_t *, struct inode *,
@@ -1073,6 +1072,8 @@ extern void ext4_set_inode_flags(struct inode *);
 extern void ext4_get_inode_flags(struct ext4_inode_info *);
 extern void ext4_set_aops(struct inode *inode);
 extern int ext4_writepage_trans_blocks(struct inode *);
+extern int ext4_meta_trans_blocks(struct inode *, int nrblocks, int idxblocks);
+extern int ext4_chunk_trans_blocks(struct inode *, int nrblocks);
 extern int ext4_block_truncate_page(handle_t *handle,
 		struct address_space *mapping, loff_t from);
 extern int ext4_page_mkwrite(struct vm_area_struct *vma, struct page *page);
@@ -1228,6 +1229,8 @@ extern const struct inode_operations ext4_fast_symlink_inode_operations;
 /* extents.c */
 extern int ext4_ext_tree_init(handle_t *handle, struct inode *);
 extern int ext4_ext_writepage_trans_blocks(struct inode *, int);
+extern int ext4_ext_index_trans_blocks(struct inode *inode, int nrblocks,
+				       int chunk);
 extern int ext4_ext_get_blocks(handle_t *handle, struct inode *inode,
 			ext4_lblk_t iblock,
 			unsigned long max_blocks, struct buffer_head *bh_result,
diff --git a/fs/ext4/ext4_extents.h b/fs/ext4/ext4_extents.h
index 6c166c0a54b7..d33dc56d6986 100644
--- a/fs/ext4/ext4_extents.h
+++ b/fs/ext4/ext4_extents.h
@@ -216,7 +216,9 @@ extern int ext4_ext_calc_metadata_amount(struct inode *inode, int blocks);
 extern ext4_fsblk_t idx_pblock(struct ext4_extent_idx *);
 extern void ext4_ext_store_pblock(struct ext4_extent *, ext4_fsblk_t);
 extern int ext4_extent_tree_init(handle_t *, struct inode *);
-extern int ext4_ext_calc_credits_for_insert(struct inode *, struct ext4_ext_path *);
+extern int ext4_ext_calc_credits_for_single_extent(struct inode *inode,
+						   int num,
+						   struct ext4_ext_path *path);
 extern int ext4_ext_try_to_merge(struct inode *inode,
 				 struct ext4_ext_path *path,
 				 struct ext4_extent *);
diff --git a/fs/ext4/ext4_jbd2.h b/fs/ext4/ext4_jbd2.h
index eb8bc3afe6e9..b455c685a98b 100644
--- a/fs/ext4/ext4_jbd2.h
+++ b/fs/ext4/ext4_jbd2.h
@@ -51,6 +51,14 @@
 					 EXT4_XATTR_TRANS_BLOCKS - 2 + \
 					 2*EXT4_QUOTA_TRANS_BLOCKS(sb))
 
+/*
+ * Define the number of metadata blocks we need to account to modify data.
+ *
+ * This include super block, inode block, quota blocks and xattr blocks
+ */
+#define EXT4_META_TRANS_BLOCKS(sb)	(EXT4_XATTR_TRANS_BLOCKS + \
+					2*EXT4_QUOTA_TRANS_BLOCKS(sb))
+
 /* Delete operations potentially hit one directory's namespace plus an
  * entire inode, plus arbitrary amounts of bitmap/indirection data.  Be
  * generous.  We can grow the delete transaction later if necessary. */
diff --git a/fs/ext4/extents.c b/fs/ext4/extents.c
index 42c4c0c892ed..b24d3c53f20c 100644
--- a/fs/ext4/extents.c
+++ b/fs/ext4/extents.c
@@ -99,7 +99,7 @@ static int ext4_ext_journal_restart(handle_t *handle, int needed)
 	if (handle->h_buffer_credits > needed)
 		return 0;
 	err = ext4_journal_extend(handle, needed);
-	if (err)
+	if (err <= 0)
 		return err;
 	return ext4_journal_restart(handle, needed);
 }
@@ -1441,7 +1441,7 @@ unsigned int ext4_ext_check_overlap(struct inode *inode,
 
 	/*
 	 * get the next allocated block if the extent in the path
-	 * is before the requested block(s) 
+	 * is before the requested block(s)
 	 */
 	if (b2 < b1) {
 		b2 = ext4_ext_next_allocated_block(path);
@@ -1747,54 +1747,61 @@ static int ext4_ext_rm_idx(handle_t *handle, struct inode *inode,
 }
 
 /*
- * ext4_ext_calc_credits_for_insert:
- * This routine returns max. credits that the extent tree can consume.
- * It should be OK for low-performance paths like ->writepage()
- * To allow many writing processes to fit into a single transaction,
- * the caller should calculate credits under i_data_sem and
- * pass the actual path.
+ * ext4_ext_calc_credits_for_single_extent:
+ * This routine returns max. credits that needed to insert an extent
+ * to the extent tree.
+ * When pass the actual path, the caller should calculate credits
+ * under i_data_sem.
  */
-int ext4_ext_calc_credits_for_insert(struct inode *inode,
+int ext4_ext_calc_credits_for_single_extent(struct inode *inode, int nrblocks,
 						struct ext4_ext_path *path)
 {
-	int depth, needed;
-
 	if (path) {
+		int depth = ext_depth(inode);
+		int ret = 0;
+
 		/* probably there is space in leaf? */
-		depth = ext_depth(inode);
 		if (le16_to_cpu(path[depth].p_hdr->eh_entries)
-				< le16_to_cpu(path[depth].p_hdr->eh_max))
-			return 1;
-	}
-
-	/*
-	 * given 32-bit logical block (4294967296 blocks), max. tree
-	 * can be 4 levels in depth -- 4 * 340^4 == 53453440000.
-	 * Let's also add one more level for imbalance.
-	 */
-	depth = 5;
+				< le16_to_cpu(path[depth].p_hdr->eh_max)) {
 
-	/* allocation of new data block(s) */
-	needed = 2;
+			/*
+			 *  There are some space in the leaf tree, no
+			 *  need to account for leaf block credit
+			 *
+			 *  bitmaps and block group descriptor blocks
+			 *  and other metadat blocks still need to be
+			 *  accounted.
+			 */
+			/* 1 bitmap, 1 block group descriptor */
+			ret = 2 + EXT4_META_TRANS_BLOCKS(inode->i_sb);
+		}
+	}
 
-	/*
-	 * tree can be full, so it would need to grow in depth:
-	 * we need one credit to modify old root, credits for
-	 * new root will be added in split accounting
-	 */
-	needed += 1;
+	return ext4_chunk_trans_blocks(inode, nrblocks);
+}
 
-	/*
-	 * Index split can happen, we would need:
-	 *    allocate intermediate indexes (bitmap + group)
-	 *  + change two blocks at each level, but root (already included)
-	 */
-	needed += (depth * 2) + (depth * 2);
+/*
+ * How many index/leaf blocks need to change/allocate to modify nrblocks?
+ *
+ * if nrblocks are fit in a single extent (chunk flag is 1), then
+ * in the worse case, each tree level index/leaf need to be changed
+ * if the tree split due to insert a new extent, then the old tree
+ * index/leaf need to be updated too
+ *
+ * If the nrblocks are discontiguous, they could cause
+ * the whole tree split more than once, but this is really rare.
+ */
+int ext4_ext_index_trans_blocks(struct inode *inode, int nrblocks, int chunk)
+{
+	int index;
+	int depth = ext_depth(inode);
 
-	/* any allocation modifies superblock */
-	needed += 1;
+	if (chunk)
+		index = depth * 2;
+	else
+		index = depth * 3;
 
-	return needed;
+	return index;
 }
 
 static int ext4_remove_blocks(handle_t *handle, struct inode *inode,
@@ -1910,16 +1917,18 @@ ext4_ext_rm_leaf(handle_t *handle, struct inode *inode,
 			BUG_ON(b != ex_ee_block + ex_ee_len - 1);
 		}
 
-		/* at present, extent can't cross block group: */
-		/* leaf + bitmap + group desc + sb + inode */
-		credits = 5;
+		/*
+		 * 3 for leaf, sb, and inode plus 2 (bmap and group
+		 * descriptor) for each block group; assume two block
+		 * groups plus ex_ee_len/blocks_per_block_group for
+		 * the worst case
+		 */
+		credits = 7 + 2*(ex_ee_len/EXT4_BLOCKS_PER_GROUP(inode->i_sb));
 		if (ex == EXT_FIRST_EXTENT(eh)) {
 			correct_index = 1;
 			credits += (ext_depth(inode)) + 1;
 		}
-#ifdef CONFIG_QUOTA
 		credits += 2 * EXT4_QUOTA_TRANS_BLOCKS(inode->i_sb);
-#endif
 
 		err = ext4_ext_journal_restart(handle, credits);
 		if (err)
@@ -2323,7 +2332,10 @@ static int ext4_ext_convert_to_initialized(handle_t *handle,
 		unsigned int newdepth;
 		/* If extent has less than EXT4_EXT_ZERO_LEN zerout directly */
 		if (allocated <= EXT4_EXT_ZERO_LEN) {
-			/* Mark first half uninitialized.
+			/*
+			 * iblock == ee_block is handled by the zerouout
+			 * at the beginning.
+			 * Mark first half uninitialized.
 			 * Mark second half initialized and zero out the
 			 * initialized extent
 			 */
@@ -2346,7 +2358,7 @@ static int ext4_ext_convert_to_initialized(handle_t *handle,
 				ex->ee_len   = orig_ex.ee_len;
 				ext4_ext_store_pblock(ex, ext_pblock(&orig_ex));
 				ext4_ext_dirty(handle, inode, path + depth);
-				/* zeroed the full extent */
+				/* blocks available from iblock */
 				return allocated;
 
 			} else if (err)
@@ -2374,6 +2386,7 @@ static int ext4_ext_convert_to_initialized(handle_t *handle,
 					err = PTR_ERR(path);
 					return err;
 				}
+				/* get the second half extent details */
 				ex = path[depth].p_ext;
 				err = ext4_ext_get_access(handle, inode,
 								path + depth);
@@ -2403,6 +2416,7 @@ static int ext4_ext_convert_to_initialized(handle_t *handle,
 			ext4_ext_store_pblock(ex, ext_pblock(&orig_ex));
 			ext4_ext_dirty(handle, inode, path + depth);
 			/* zeroed the full extent */
+			/* blocks available from iblock */
 			return allocated;
 
 		} else if (err)
@@ -2418,23 +2432,22 @@ static int ext4_ext_convert_to_initialized(handle_t *handle,
 		 */
 		orig_ex.ee_len = cpu_to_le16(ee_len -
 						ext4_ext_get_actual_len(ex3));
-		if (newdepth != depth) {
-			depth = newdepth;
-			ext4_ext_drop_refs(path);
-			path = ext4_ext_find_extent(inode, iblock, path);
-			if (IS_ERR(path)) {
-				err = PTR_ERR(path);
-				goto out;
-			}
-			eh = path[depth].p_hdr;
-			ex = path[depth].p_ext;
-			if (ex2 != &newex)
-				ex2 = ex;
-
-			err = ext4_ext_get_access(handle, inode, path + depth);
-			if (err)
-				goto out;
+		depth = newdepth;
+		ext4_ext_drop_refs(path);
+		path = ext4_ext_find_extent(inode, iblock, path);
+		if (IS_ERR(path)) {
+			err = PTR_ERR(path);
+			goto out;
 		}
+		eh = path[depth].p_hdr;
+		ex = path[depth].p_ext;
+		if (ex2 != &newex)
+			ex2 = ex;
+
+		err = ext4_ext_get_access(handle, inode, path + depth);
+		if (err)
+			goto out;
+
 		allocated = max_blocks;
 
 		/* If extent has less than EXT4_EXT_ZERO_LEN and we are trying
@@ -2452,6 +2465,7 @@ static int ext4_ext_convert_to_initialized(handle_t *handle,
 			ext4_ext_store_pblock(ex, ext_pblock(&orig_ex));
 			ext4_ext_dirty(handle, inode, path + depth);
 			/* zero out the first half */
+			/* blocks available from iblock */
 			return allocated;
 		}
 	}
@@ -2796,7 +2810,7 @@ void ext4_ext_truncate(struct inode *inode)
 	/*
 	 * probably first extent we're gonna free will be last in block
 	 */
-	err = ext4_writepage_trans_blocks(inode) + 3;
+	err = ext4_writepage_trans_blocks(inode);
 	handle = ext4_journal_start(inode, err);
 	if (IS_ERR(handle))
 		return;
@@ -2810,7 +2824,7 @@ void ext4_ext_truncate(struct inode *inode)
 	down_write(&EXT4_I(inode)->i_data_sem);
 	ext4_ext_invalidate_cache(inode);
 
-	ext4_mb_discard_inode_preallocations(inode);
+	ext4_discard_reservation(inode);
 
 	/*
 	 * TODO: optimization is possible here.
@@ -2849,27 +2863,6 @@ out_stop:
 	ext4_journal_stop(handle);
 }
 
-/*
- * ext4_ext_writepage_trans_blocks:
- * calculate max number of blocks we could modify
- * in order to allocate new block for an inode
- */
-int ext4_ext_writepage_trans_blocks(struct inode *inode, int num)
-{
-	int needed;
-
-	needed = ext4_ext_calc_credits_for_insert(inode, NULL);
-
-	/* caller wants to allocate num blocks, but note it includes sb */
-	needed = needed * num - (num - 1);
-
-#ifdef CONFIG_QUOTA
-	needed += 2 * EXT4_QUOTA_TRANS_BLOCKS(inode->i_sb);
-#endif
-
-	return needed;
-}
-
 static void ext4_falloc_update_inode(struct inode *inode,
 				int mode, loff_t new_size, int update_ctime)
 {
@@ -2930,10 +2923,9 @@ long ext4_fallocate(struct inode *inode, int mode, loff_t offset, loff_t len)
 	max_blocks = (EXT4_BLOCK_ALIGN(len + offset, blkbits) >> blkbits)
 							- block;
 	/*
-	 * credits to insert 1 extent into extent tree + buffers to be able to
-	 * modify 1 super block, 1 block bitmap and 1 group descriptor.
+	 * credits to insert 1 extent into extent tree
 	 */
-	credits = EXT4_DATA_TRANS_BLOCKS(inode->i_sb) + 3;
+	credits = ext4_chunk_trans_blocks(inode, max_blocks);
 	mutex_lock(&inode->i_mutex);
 retry:
 	while (ret >= 0 && ret < max_blocks) {
diff --git a/fs/ext4/ialloc.c b/fs/ext4/ialloc.c
index a92eb305344f..f344834bbf58 100644
--- a/fs/ext4/ialloc.c
+++ b/fs/ext4/ialloc.c
@@ -97,34 +97,44 @@ unsigned ext4_init_inode_bitmap(struct super_block *sb, struct buffer_head *bh,
  * Return buffer_head of bitmap on success or NULL.
  */
 static struct buffer_head *
-read_inode_bitmap(struct super_block *sb, ext4_group_t block_group)
+ext4_read_inode_bitmap(struct super_block *sb, ext4_group_t block_group)
 {
 	struct ext4_group_desc *desc;
 	struct buffer_head *bh = NULL;
+	ext4_fsblk_t bitmap_blk;
 
 	desc = ext4_get_group_desc(sb, block_group, NULL);
 	if (!desc)
-		goto error_out;
-	if (desc->bg_flags & cpu_to_le16(EXT4_BG_INODE_UNINIT)) {
-		bh = sb_getblk(sb, ext4_inode_bitmap(sb, desc));
-		if (!buffer_uptodate(bh)) {
-			lock_buffer(bh);
-			if (!buffer_uptodate(bh)) {
-				ext4_init_inode_bitmap(sb, bh, block_group,
-						       desc);
-				set_buffer_uptodate(bh);
-			}
-			unlock_buffer(bh);
-		}
-	} else {
-		bh = sb_bread(sb, ext4_inode_bitmap(sb, desc));
+		return NULL;
+	bitmap_blk = ext4_inode_bitmap(sb, desc);
+	bh = sb_getblk(sb, bitmap_blk);
+	if (unlikely(!bh)) {
+		ext4_error(sb, __func__,
+			    "Cannot read inode bitmap - "
+			    "block_group = %lu, inode_bitmap = %llu",
+			    block_group, bitmap_blk);
+		return NULL;
 	}
-	if (!bh)
-		ext4_error(sb, "read_inode_bitmap",
+	if (bh_uptodate_or_lock(bh))
+		return bh;
+
+	spin_lock(sb_bgl_lock(EXT4_SB(sb), block_group));
+	if (desc->bg_flags & cpu_to_le16(EXT4_BG_INODE_UNINIT)) {
+		ext4_init_inode_bitmap(sb, bh, block_group, desc);
+		set_buffer_uptodate(bh);
+		unlock_buffer(bh);
+		spin_unlock(sb_bgl_lock(EXT4_SB(sb), block_group));
+		return bh;
+	}
+	spin_unlock(sb_bgl_lock(EXT4_SB(sb), block_group));
+	if (bh_submit_read(bh) < 0) {
+		put_bh(bh);
+		ext4_error(sb, __func__,
 			    "Cannot read inode bitmap - "
 			    "block_group = %lu, inode_bitmap = %llu",
-			    block_group, ext4_inode_bitmap(sb, desc));
-error_out:
+			    block_group, bitmap_blk);
+		return NULL;
+	}
 	return bh;
 }
 
@@ -200,7 +210,7 @@ void ext4_free_inode (handle_t *handle, struct inode * inode)
 	}
 	block_group = (ino - 1) / EXT4_INODES_PER_GROUP(sb);
 	bit = (ino - 1) % EXT4_INODES_PER_GROUP(sb);
-	bitmap_bh = read_inode_bitmap(sb, block_group);
+	bitmap_bh = ext4_read_inode_bitmap(sb, block_group);
 	if (!bitmap_bh)
 		goto error_return;
 
@@ -341,7 +351,7 @@ find_close_to_parent:
 			goto found_flexbg;
 		}
 
-		if (best_flex < 0 ||
+		if (flex_group[best_flex].free_inodes == 0 ||
 		    (flex_group[i].free_blocks >
 		     flex_group[best_flex].free_blocks &&
 		     flex_group[i].free_inodes))
@@ -623,7 +633,7 @@ got_group:
 			goto fail;
 
 		brelse(bitmap_bh);
-		bitmap_bh = read_inode_bitmap(sb, group);
+		bitmap_bh = ext4_read_inode_bitmap(sb, group);
 		if (!bitmap_bh)
 			goto fail;
 
@@ -728,7 +738,7 @@ got:
 
 			/* When marking the block group with
 			 * ~EXT4_BG_INODE_UNINIT we don't want to depend
-			 * on the value of bg_itable_unsed even though
+			 * on the value of bg_itable_unused even though
 			 * mke2fs could have initialized the same for us.
 			 * Instead we calculated the value below
 			 */
@@ -891,7 +901,7 @@ struct inode *ext4_orphan_get(struct super_block *sb, unsigned long ino)
 
 	block_group = (ino - 1) / EXT4_INODES_PER_GROUP(sb);
 	bit = (ino - 1) % EXT4_INODES_PER_GROUP(sb);
-	bitmap_bh = read_inode_bitmap(sb, block_group);
+	bitmap_bh = ext4_read_inode_bitmap(sb, block_group);
 	if (!bitmap_bh) {
 		ext4_warning(sb, __func__,
 			     "inode bitmap error for orphan %lu", ino);
@@ -969,7 +979,7 @@ unsigned long ext4_count_free_inodes (struct super_block * sb)
 			continue;
 		desc_count += le16_to_cpu(gdp->bg_free_inodes_count);
 		brelse(bitmap_bh);
-		bitmap_bh = read_inode_bitmap(sb, i);
+		bitmap_bh = ext4_read_inode_bitmap(sb, i);
 		if (!bitmap_bh)
 			continue;
 
diff --git a/fs/ext4/inode.c b/fs/ext4/inode.c
index 8ca2763df091..7e91913e325b 100644
--- a/fs/ext4/inode.c
+++ b/fs/ext4/inode.c
@@ -41,6 +41,8 @@
 #include "acl.h"
 #include "ext4_extents.h"
 
+#define MPAGE_DA_EXTENT_TAIL 0x01
+
 static inline int ext4_begin_ordered_truncate(struct inode *inode,
 					      loff_t new_size)
 {
@@ -191,6 +193,7 @@ static int ext4_journal_test_restart(handle_t *handle, struct inode *inode)
 void ext4_delete_inode (struct inode * inode)
 {
 	handle_t *handle;
+	int err;
 
 	if (ext4_should_order_data(inode))
 		ext4_begin_ordered_truncate(inode, 0);
@@ -199,8 +202,9 @@ void ext4_delete_inode (struct inode * inode)
 	if (is_bad_inode(inode))
 		goto no_delete;
 
-	handle = start_transaction(inode);
+	handle = ext4_journal_start(inode, blocks_for_truncate(inode)+3);
 	if (IS_ERR(handle)) {
+		ext4_std_error(inode->i_sb, PTR_ERR(handle));
 		/*
 		 * If we're going to skip the normal cleanup, we still need to
 		 * make sure that the in-core orphan linked list is properly
@@ -213,8 +217,34 @@ void ext4_delete_inode (struct inode * inode)
 	if (IS_SYNC(inode))
 		handle->h_sync = 1;
 	inode->i_size = 0;
+	err = ext4_mark_inode_dirty(handle, inode);
+	if (err) {
+		ext4_warning(inode->i_sb, __func__,
+			     "couldn't mark inode dirty (err %d)", err);
+		goto stop_handle;
+	}
 	if (inode->i_blocks)
 		ext4_truncate(inode);
+
+	/*
+	 * ext4_ext_truncate() doesn't reserve any slop when it
+	 * restarts journal transactions; therefore there may not be
+	 * enough credits left in the handle to remove the inode from
+	 * the orphan list and set the dtime field.
+	 */
+	if (handle->h_buffer_credits < 3) {
+		err = ext4_journal_extend(handle, 3);
+		if (err > 0)
+			err = ext4_journal_restart(handle, 3);
+		if (err != 0) {
+			ext4_warning(inode->i_sb, __func__,
+				     "couldn't extend journal (err %d)", err);
+		stop_handle:
+			ext4_journal_stop(handle);
+			goto no_delete;
+		}
+	}
+
 	/*
 	 * Kill off the orphan record which ext4_truncate created.
 	 * AKPM: I think this can be inside the above `if'.
@@ -952,23 +982,74 @@ out:
 	return err;
 }
 
-/* Maximum number of blocks we map for direct IO at once. */
-#define DIO_MAX_BLOCKS 4096
 /*
- * Number of credits we need for writing DIO_MAX_BLOCKS:
- * We need sb + group descriptor + bitmap + inode -> 4
- * For B blocks with A block pointers per block we need:
- * 1 (triple ind.) + (B/A/A + 2) (doubly ind.) + (B/A + 2) (indirect).
- * If we plug in 4096 for B and 256 for A (for 1KB block size), we get 25.
+ * Calculate the number of metadata blocks need to reserve
+ * to allocate @blocks for non extent file based file
  */
-#define DIO_CREDITS 25
+static int ext4_indirect_calc_metadata_amount(struct inode *inode, int blocks)
+{
+	int icap = EXT4_ADDR_PER_BLOCK(inode->i_sb);
+	int ind_blks, dind_blks, tind_blks;
+
+	/* number of new indirect blocks needed */
+	ind_blks = (blocks + icap - 1) / icap;
+
+	dind_blks = (ind_blks + icap - 1) / icap;
 
+	tind_blks = 1;
+
+	return ind_blks + dind_blks + tind_blks;
+}
 
 /*
+ * Calculate the number of metadata blocks need to reserve
+ * to allocate given number of blocks
+ */
+static int ext4_calc_metadata_amount(struct inode *inode, int blocks)
+{
+	if (!blocks)
+		return 0;
+
+	if (EXT4_I(inode)->i_flags & EXT4_EXTENTS_FL)
+		return ext4_ext_calc_metadata_amount(inode, blocks);
+
+	return ext4_indirect_calc_metadata_amount(inode, blocks);
+}
+
+static void ext4_da_update_reserve_space(struct inode *inode, int used)
+{
+	struct ext4_sb_info *sbi = EXT4_SB(inode->i_sb);
+	int total, mdb, mdb_free;
+
+	spin_lock(&EXT4_I(inode)->i_block_reservation_lock);
+	/* recalculate the number of metablocks still need to be reserved */
+	total = EXT4_I(inode)->i_reserved_data_blocks - used;
+	mdb = ext4_calc_metadata_amount(inode, total);
+
+	/* figure out how many metablocks to release */
+	BUG_ON(mdb > EXT4_I(inode)->i_reserved_meta_blocks);
+	mdb_free = EXT4_I(inode)->i_reserved_meta_blocks - mdb;
+
+	/* Account for allocated meta_blocks */
+	mdb_free -= EXT4_I(inode)->i_allocated_meta_blocks;
+
+	/* update fs free blocks counter for truncate case */
+	percpu_counter_add(&sbi->s_freeblocks_counter, mdb_free);
+
+	/* update per-inode reservations */
+	BUG_ON(used  > EXT4_I(inode)->i_reserved_data_blocks);
+	EXT4_I(inode)->i_reserved_data_blocks -= used;
+
+	BUG_ON(mdb > EXT4_I(inode)->i_reserved_meta_blocks);
+	EXT4_I(inode)->i_reserved_meta_blocks = mdb;
+	EXT4_I(inode)->i_allocated_meta_blocks = 0;
+	spin_unlock(&EXT4_I(inode)->i_block_reservation_lock);
+}
+
+/*
+ * The ext4_get_blocks_wrap() function try to look up the requested blocks,
+ * and returns if the blocks are already mapped.
  *
- *
- * ext4_ext4 get_block() wrapper function
- * It will do a look up first, and returns if the blocks already mapped.
  * Otherwise it takes the write lock of the i_data_sem and allocate blocks
  * and store the allocated blocks in the result buffer head and mark it
  * mapped.
@@ -1069,26 +1150,30 @@ int ext4_get_blocks_wrap(handle_t *handle, struct inode *inode, sector_t block,
 		 * which were deferred till now
 		 */
 		if ((retval > 0) && buffer_delay(bh))
-			ext4_da_release_space(inode, retval, 0);
+			ext4_da_update_reserve_space(inode, retval);
 	}
 
 	up_write((&EXT4_I(inode)->i_data_sem));
 	return retval;
 }
 
+/* Maximum number of blocks we map for direct IO at once. */
+#define DIO_MAX_BLOCKS 4096
+
 static int ext4_get_block(struct inode *inode, sector_t iblock,
 			struct buffer_head *bh_result, int create)
 {
 	handle_t *handle = ext4_journal_current_handle();
 	int ret = 0, started = 0;
 	unsigned max_blocks = bh_result->b_size >> inode->i_blkbits;
+	int dio_credits;
 
 	if (create && !handle) {
 		/* Direct IO write... */
 		if (max_blocks > DIO_MAX_BLOCKS)
 			max_blocks = DIO_MAX_BLOCKS;
-		handle = ext4_journal_start(inode, DIO_CREDITS +
-			      2 * EXT4_QUOTA_TRANS_BLOCKS(inode->i_sb));
+		dio_credits = ext4_chunk_trans_blocks(inode, max_blocks);
+		handle = ext4_journal_start(inode, dio_credits);
 		if (IS_ERR(handle)) {
 			ret = PTR_ERR(handle);
 			goto out;
@@ -1336,12 +1421,8 @@ static int ext4_ordered_write_end(struct file *file,
 {
 	handle_t *handle = ext4_journal_current_handle();
 	struct inode *inode = mapping->host;
-	unsigned from, to;
 	int ret = 0, ret2;
 
-	from = pos & (PAGE_CACHE_SIZE - 1);
-	to = from + len;
-
 	ret = ext4_jbd2_file_inode(handle, inode);
 
 	if (ret == 0) {
@@ -1437,36 +1518,6 @@ static int ext4_journalled_write_end(struct file *file,
 
 	return ret ? ret : copied;
 }
-/*
- * Calculate the number of metadata blocks need to reserve
- * to allocate @blocks for non extent file based file
- */
-static int ext4_indirect_calc_metadata_amount(struct inode *inode, int blocks)
-{
-	int icap = EXT4_ADDR_PER_BLOCK(inode->i_sb);
-	int ind_blks, dind_blks, tind_blks;
-
-	/* number of new indirect blocks needed */
-	ind_blks = (blocks + icap - 1) / icap;
-
-	dind_blks = (ind_blks + icap - 1) / icap;
-
-	tind_blks = 1;
-
-	return ind_blks + dind_blks + tind_blks;
-}
-
-/*
- * Calculate the number of metadata blocks need to reserve
- * to allocate given number of blocks
- */
-static int ext4_calc_metadata_amount(struct inode *inode, int blocks)
-{
-	if (EXT4_I(inode)->i_flags & EXT4_EXTENTS_FL)
-		return ext4_ext_calc_metadata_amount(inode, blocks);
-
-	return ext4_indirect_calc_metadata_amount(inode, blocks);
-}
 
 static int ext4_da_reserve_space(struct inode *inode, int nrblocks)
 {
@@ -1490,7 +1541,6 @@ static int ext4_da_reserve_space(struct inode *inode, int nrblocks)
 		spin_unlock(&EXT4_I(inode)->i_block_reservation_lock);
 		return -ENOSPC;
 	}
-
 	/* reduce fs free blocks counter */
 	percpu_counter_sub(&sbi->s_freeblocks_counter, total);
 
@@ -1501,35 +1551,49 @@ static int ext4_da_reserve_space(struct inode *inode, int nrblocks)
 	return 0;       /* success */
 }
 
-void ext4_da_release_space(struct inode *inode, int used, int to_free)
+static void ext4_da_release_space(struct inode *inode, int to_free)
 {
 	struct ext4_sb_info *sbi = EXT4_SB(inode->i_sb);
 	int total, mdb, mdb_free, release;
 
+	if (!to_free)
+		return;		/* Nothing to release, exit */
+
 	spin_lock(&EXT4_I(inode)->i_block_reservation_lock);
+
+	if (!EXT4_I(inode)->i_reserved_data_blocks) {
+		/*
+		 * if there is no reserved blocks, but we try to free some
+		 * then the counter is messed up somewhere.
+		 * but since this function is called from invalidate
+		 * page, it's harmless to return without any action
+		 */
+		printk(KERN_INFO "ext4 delalloc try to release %d reserved "
+			    "blocks for inode %lu, but there is no reserved "
+			    "data blocks\n", to_free, inode->i_ino);
+		spin_unlock(&EXT4_I(inode)->i_block_reservation_lock);
+		return;
+	}
+
 	/* recalculate the number of metablocks still need to be reserved */
-	total = EXT4_I(inode)->i_reserved_data_blocks - used - to_free;
+	total = EXT4_I(inode)->i_reserved_data_blocks - to_free;
 	mdb = ext4_calc_metadata_amount(inode, total);
 
 	/* figure out how many metablocks to release */
 	BUG_ON(mdb > EXT4_I(inode)->i_reserved_meta_blocks);
 	mdb_free = EXT4_I(inode)->i_reserved_meta_blocks - mdb;
 
-	/* Account for allocated meta_blocks */
-	mdb_free -= EXT4_I(inode)->i_allocated_meta_blocks;
-
 	release = to_free + mdb_free;
 
 	/* update fs free blocks counter for truncate case */
 	percpu_counter_add(&sbi->s_freeblocks_counter, release);
 
 	/* update per-inode reservations */
-	BUG_ON(used + to_free > EXT4_I(inode)->i_reserved_data_blocks);
-	EXT4_I(inode)->i_reserved_data_blocks -= (used + to_free);
+	BUG_ON(to_free > EXT4_I(inode)->i_reserved_data_blocks);
+	EXT4_I(inode)->i_reserved_data_blocks -= to_free;
 
 	BUG_ON(mdb > EXT4_I(inode)->i_reserved_meta_blocks);
 	EXT4_I(inode)->i_reserved_meta_blocks = mdb;
-	EXT4_I(inode)->i_allocated_meta_blocks = 0;
 	spin_unlock(&EXT4_I(inode)->i_block_reservation_lock);
 }
 
@@ -1551,7 +1615,7 @@ static void ext4_da_page_release_reservation(struct page *page,
 		}
 		curr_off = next_off;
 	} while ((bh = bh->b_this_page) != head);
-	ext4_da_release_space(page->mapping->host, 0, to_release);
+	ext4_da_release_space(page->mapping->host, to_release);
 }
 
 /*
@@ -1564,11 +1628,13 @@ struct mpage_da_data {
 	unsigned long first_page, next_page;	/* extent of pages */
 	get_block_t *get_block;
 	struct writeback_control *wbc;
+	int io_done;
+	long pages_written;
 };
 
 /*
  * mpage_da_submit_io - walks through extent of pages and try to write
- * them with __mpage_writepage()
+ * them with writepage() call back
  *
  * @mpd->inode: inode
  * @mpd->first_page: first page of the extent
@@ -1583,18 +1649,11 @@ struct mpage_da_data {
 static int mpage_da_submit_io(struct mpage_da_data *mpd)
 {
 	struct address_space *mapping = mpd->inode->i_mapping;
-	struct mpage_data mpd_pp = {
-		.bio = NULL,
-		.last_block_in_bio = 0,
-		.get_block = mpd->get_block,
-		.use_writepage = 1,
-	};
 	int ret = 0, err, nr_pages, i;
 	unsigned long index, end;
 	struct pagevec pvec;
 
 	BUG_ON(mpd->next_page <= mpd->first_page);
-
 	pagevec_init(&pvec, 0);
 	index = mpd->first_page;
 	end = mpd->next_page - 1;
@@ -1612,8 +1671,9 @@ static int mpage_da_submit_io(struct mpage_da_data *mpd)
 				break;
 			index++;
 
-			err = __mpage_writepage(page, mpd->wbc, &mpd_pp);
-
+			err = mapping->a_ops->writepage(page, mpd->wbc);
+			if (!err)
+				mpd->pages_written++;
 			/*
 			 * In error case, we have to continue because
 			 * remaining pages are still locked
@@ -1624,9 +1684,6 @@ static int mpage_da_submit_io(struct mpage_da_data *mpd)
 		}
 		pagevec_release(&pvec);
 	}
-	if (mpd_pp.bio)
-		mpage_bio_submit(WRITE, mpd_pp.bio);
-
 	return ret;
 }
 
@@ -1649,7 +1706,7 @@ static void mpage_put_bnr_to_bhs(struct mpage_da_data *mpd, sector_t logical,
 	int blocks = exbh->b_size >> inode->i_blkbits;
 	sector_t pblock = exbh->b_blocknr, cur_logical;
 	struct buffer_head *head, *bh;
-	unsigned long index, end;
+	pgoff_t index, end;
 	struct pagevec pvec;
 	int nr_pages, i;
 
@@ -1692,6 +1749,13 @@ static void mpage_put_bnr_to_bhs(struct mpage_da_data *mpd, sector_t logical,
 				if (buffer_delay(bh)) {
 					bh->b_blocknr = pblock;
 					clear_buffer_delay(bh);
+					bh->b_bdev = inode->i_sb->s_bdev;
+				} else if (buffer_unwritten(bh)) {
+					bh->b_blocknr = pblock;
+					clear_buffer_unwritten(bh);
+					set_buffer_mapped(bh);
+					set_buffer_new(bh);
+					bh->b_bdev = inode->i_sb->s_bdev;
 				} else if (buffer_mapped(bh))
 					BUG_ON(bh->b_blocknr != pblock);
 
@@ -1727,13 +1791,11 @@ static inline void __unmap_underlying_blocks(struct inode *inode,
  *
  * The function skips space we know is already mapped to disk blocks.
  *
- * The function ignores errors ->get_block() returns, thus real
- * error handling is postponed to __mpage_writepage()
  */
 static void mpage_da_map_blocks(struct mpage_da_data *mpd)
 {
+	int err = 0;
 	struct buffer_head *lbh = &mpd->lbh;
-	int err = 0, remain = lbh->b_size;
 	sector_t next = lbh->b_blocknr;
 	struct buffer_head new;
 
@@ -1743,38 +1805,36 @@ static void mpage_da_map_blocks(struct mpage_da_data *mpd)
 	if (buffer_mapped(lbh) && !buffer_delay(lbh))
 		return;
 
-	while (remain) {
-		new.b_state = lbh->b_state;
-		new.b_blocknr = 0;
-		new.b_size = remain;
-		err = mpd->get_block(mpd->inode, next, &new, 1);
-		if (err) {
-			/*
-			 * Rather than implement own error handling
-			 * here, we just leave remaining blocks
-			 * unallocated and try again with ->writepage()
-			 */
-			break;
-		}
-		BUG_ON(new.b_size == 0);
+	new.b_state = lbh->b_state;
+	new.b_blocknr = 0;
+	new.b_size = lbh->b_size;
 
-		if (buffer_new(&new))
-			__unmap_underlying_blocks(mpd->inode, &new);
+	/*
+	 * If we didn't accumulate anything
+	 * to write simply return
+	 */
+	if (!new.b_size)
+		return;
+	err = mpd->get_block(mpd->inode, next, &new, 1);
+	if (err)
+		return;
+	BUG_ON(new.b_size == 0);
 
-		/*
-		 * If blocks are delayed marked, we need to
-		 * put actual blocknr and drop delayed bit
-		 */
-		if (buffer_delay(lbh))
-			mpage_put_bnr_to_bhs(mpd, next, &new);
+	if (buffer_new(&new))
+		__unmap_underlying_blocks(mpd->inode, &new);
 
-		/* go for the remaining blocks */
-		next += new.b_size >> mpd->inode->i_blkbits;
-		remain -= new.b_size;
-	}
+	/*
+	 * If blocks are delayed marked, we need to
+	 * put actual blocknr and drop delayed bit
+	 */
+	if (buffer_delay(lbh) || buffer_unwritten(lbh))
+		mpage_put_bnr_to_bhs(mpd, next, &new);
+
+	return;
 }
 
-#define BH_FLAGS ((1 << BH_Uptodate) | (1 << BH_Mapped) | (1 << BH_Delay))
+#define BH_FLAGS ((1 << BH_Uptodate) | (1 << BH_Mapped) | \
+		(1 << BH_Delay) | (1 << BH_Unwritten))
 
 /*
  * mpage_add_bh_to_extent - try to add one more block to extent of blocks
@@ -1788,41 +1848,61 @@ static void mpage_da_map_blocks(struct mpage_da_data *mpd)
 static void mpage_add_bh_to_extent(struct mpage_da_data *mpd,
 				   sector_t logical, struct buffer_head *bh)
 {
-	struct buffer_head *lbh = &mpd->lbh;
 	sector_t next;
+	size_t b_size = bh->b_size;
+	struct buffer_head *lbh = &mpd->lbh;
+	int nrblocks = lbh->b_size >> mpd->inode->i_blkbits;
 
-	next = lbh->b_blocknr + (lbh->b_size >> mpd->inode->i_blkbits);
-
+	/* check if thereserved journal credits might overflow */
+	if (!(EXT4_I(mpd->inode)->i_flags & EXT4_EXTENTS_FL)) {
+		if (nrblocks >= EXT4_MAX_TRANS_DATA) {
+			/*
+			 * With non-extent format we are limited by the journal
+			 * credit available.  Total credit needed to insert
+			 * nrblocks contiguous blocks is dependent on the
+			 * nrblocks.  So limit nrblocks.
+			 */
+			goto flush_it;
+		} else if ((nrblocks + (b_size >> mpd->inode->i_blkbits)) >
+				EXT4_MAX_TRANS_DATA) {
+			/*
+			 * Adding the new buffer_head would make it cross the
+			 * allowed limit for which we have journal credit
+			 * reserved. So limit the new bh->b_size
+			 */
+			b_size = (EXT4_MAX_TRANS_DATA - nrblocks) <<
+						mpd->inode->i_blkbits;
+			/* we will do mpage_da_submit_io in the next loop */
+		}
+	}
 	/*
 	 * First block in the extent
 	 */
 	if (lbh->b_size == 0) {
 		lbh->b_blocknr = logical;
-		lbh->b_size = bh->b_size;
+		lbh->b_size = b_size;
 		lbh->b_state = bh->b_state & BH_FLAGS;
 		return;
 	}
 
+	next = lbh->b_blocknr + nrblocks;
 	/*
 	 * Can we merge the block to our big extent?
 	 */
 	if (logical == next && (bh->b_state & BH_FLAGS) == lbh->b_state) {
-		lbh->b_size += bh->b_size;
+		lbh->b_size += b_size;
 		return;
 	}
 
+flush_it:
 	/*
 	 * We couldn't merge the block to our extent, so we
 	 * need to flush current  extent and start new one
 	 */
 	mpage_da_map_blocks(mpd);
-
-	/*
-	 * Now start a new extent
-	 */
-	lbh->b_size = bh->b_size;
-	lbh->b_state = bh->b_state & BH_FLAGS;
-	lbh->b_blocknr = logical;
+	mpage_da_submit_io(mpd);
+	mpd->io_done = 1;
+	return;
 }
 
 /*
@@ -1842,17 +1922,35 @@ static int __mpage_da_writepage(struct page *page,
 	struct buffer_head *bh, *head, fake;
 	sector_t logical;
 
+	if (mpd->io_done) {
+		/*
+		 * Rest of the page in the page_vec
+		 * redirty then and skip then. We will
+		 * try to to write them again after
+		 * starting a new transaction
+		 */
+		redirty_page_for_writepage(wbc, page);
+		unlock_page(page);
+		return MPAGE_DA_EXTENT_TAIL;
+	}
 	/*
 	 * Can we merge this page to current extent?
 	 */
 	if (mpd->next_page != page->index) {
 		/*
 		 * Nope, we can't. So, we map non-allocated blocks
-		 * and start IO on them using __mpage_writepage()
+		 * and start IO on them using writepage()
 		 */
 		if (mpd->next_page != mpd->first_page) {
 			mpage_da_map_blocks(mpd);
 			mpage_da_submit_io(mpd);
+			/*
+			 * skip rest of the page in the page_vec
+			 */
+			mpd->io_done = 1;
+			redirty_page_for_writepage(wbc, page);
+			unlock_page(page);
+			return MPAGE_DA_EXTENT_TAIL;
 		}
 
 		/*
@@ -1883,6 +1981,8 @@ static int __mpage_da_writepage(struct page *page,
 		set_buffer_dirty(bh);
 		set_buffer_uptodate(bh);
 		mpage_add_bh_to_extent(mpd, logical, bh);
+		if (mpd->io_done)
+			return MPAGE_DA_EXTENT_TAIL;
 	} else {
 		/*
 		 * Page with regular buffer heads, just add all dirty ones
@@ -1891,8 +1991,12 @@ static int __mpage_da_writepage(struct page *page,
 		bh = head;
 		do {
 			BUG_ON(buffer_locked(bh));
-			if (buffer_dirty(bh))
+			if (buffer_dirty(bh) &&
+				(!buffer_mapped(bh) || buffer_delay(bh))) {
 				mpage_add_bh_to_extent(mpd, logical, bh);
+				if (mpd->io_done)
+					return MPAGE_DA_EXTENT_TAIL;
+			}
 			logical++;
 		} while ((bh = bh->b_this_page) != head);
 	}
@@ -1911,22 +2015,13 @@ static int __mpage_da_writepage(struct page *page,
  *
  * This is a library function, which implements the writepages()
  * address_space_operation.
- *
- * In order to avoid duplication of logic that deals with partial pages,
- * multiple bio per page, etc, we find non-allocated blocks, allocate
- * them with minimal calls to ->get_block() and re-use __mpage_writepage()
- *
- * It's important that we call __mpage_writepage() only once for each
- * involved page, otherwise we'd have to implement more complicated logic
- * to deal with pages w/o PG_lock or w/ PG_writeback and so on.
- *
- * See comments to mpage_writepages()
  */
 static int mpage_da_writepages(struct address_space *mapping,
 			       struct writeback_control *wbc,
 			       get_block_t get_block)
 {
 	struct mpage_da_data mpd;
+	long to_write;
 	int ret;
 
 	if (!get_block)
@@ -1940,17 +2035,22 @@ static int mpage_da_writepages(struct address_space *mapping,
 	mpd.first_page = 0;
 	mpd.next_page = 0;
 	mpd.get_block = get_block;
+	mpd.io_done = 0;
+	mpd.pages_written = 0;
+
+	to_write = wbc->nr_to_write;
 
 	ret = write_cache_pages(mapping, wbc, __mpage_da_writepage, &mpd);
 
 	/*
 	 * Handle last extent of pages
 	 */
-	if (mpd.next_page != mpd.first_page) {
+	if (!mpd.io_done && mpd.next_page != mpd.first_page) {
 		mpage_da_map_blocks(&mpd);
 		mpage_da_submit_io(&mpd);
 	}
 
+	wbc->nr_to_write = to_write - mpd.pages_written;
 	return ret;
 }
 
@@ -2155,63 +2255,95 @@ static int ext4_da_writepage(struct page *page,
 }
 
 /*
- * For now just follow the DIO way to estimate the max credits
- * needed to write out EXT4_MAX_WRITEBACK_PAGES.
- * todo: need to calculate the max credits need for
- * extent based files, currently the DIO credits is based on
- * indirect-blocks mapping way.
- *
- * Probably should have a generic way to calculate credits
- * for DIO, writepages, and truncate
+ * This is called via ext4_da_writepages() to
+ * calulate the total number of credits to reserve to fit
+ * a single extent allocation into a single transaction,
+ * ext4_da_writpeages() will loop calling this before
+ * the block allocation.
  */
-#define EXT4_MAX_WRITEBACK_PAGES      DIO_MAX_BLOCKS
-#define EXT4_MAX_WRITEBACK_CREDITS    DIO_CREDITS
+
+static int ext4_da_writepages_trans_blocks(struct inode *inode)
+{
+	int max_blocks = EXT4_I(inode)->i_reserved_data_blocks;
+
+	/*
+	 * With non-extent format the journal credit needed to
+	 * insert nrblocks contiguous block is dependent on
+	 * number of contiguous block. So we will limit
+	 * number of contiguous block to a sane value
+	 */
+	if (!(inode->i_flags & EXT4_EXTENTS_FL) &&
+	    (max_blocks > EXT4_MAX_TRANS_DATA))
+		max_blocks = EXT4_MAX_TRANS_DATA;
+
+	return ext4_chunk_trans_blocks(inode, max_blocks);
+}
 
 static int ext4_da_writepages(struct address_space *mapping,
-				struct writeback_control *wbc)
+			      struct writeback_control *wbc)
 {
-	struct inode *inode = mapping->host;
 	handle_t *handle = NULL;
-	int needed_blocks;
-	int ret = 0;
-	long to_write;
 	loff_t range_start = 0;
+	struct inode *inode = mapping->host;
+	int needed_blocks, ret = 0, nr_to_writebump = 0;
+	long to_write, pages_skipped = 0;
+	struct ext4_sb_info *sbi = EXT4_SB(mapping->host->i_sb);
 
 	/*
 	 * No pages to write? This is mainly a kludge to avoid starting
 	 * a transaction for special inodes like journal inode on last iput()
 	 * because that could violate lock ordering on umount
 	 */
-	if (!mapping->nrpages)
+	if (!mapping->nrpages || !mapping_tagged(mapping, PAGECACHE_TAG_DIRTY))
 		return 0;
-
 	/*
-	 * Estimate the worse case needed credits to write out
-	 * EXT4_MAX_BUF_BLOCKS pages
+	 * Make sure nr_to_write is >= sbi->s_mb_stream_request
+	 * This make sure small files blocks are allocated in
+	 * single attempt. This ensure that small files
+	 * get less fragmented.
 	 */
-	needed_blocks = EXT4_MAX_WRITEBACK_CREDITS;
+	if (wbc->nr_to_write < sbi->s_mb_stream_request) {
+		nr_to_writebump = sbi->s_mb_stream_request - wbc->nr_to_write;
+		wbc->nr_to_write = sbi->s_mb_stream_request;
+	}
 
-	to_write = wbc->nr_to_write;
-	if (!wbc->range_cyclic) {
+	if (!wbc->range_cyclic)
 		/*
 		 * If range_cyclic is not set force range_cont
 		 * and save the old writeback_index
 		 */
 		wbc->range_cont = 1;
-		range_start =  wbc->range_start;
-	}
 
-	while (!ret && to_write) {
+	range_start =  wbc->range_start;
+	pages_skipped = wbc->pages_skipped;
+
+restart_loop:
+	to_write = wbc->nr_to_write;
+	while (!ret && to_write > 0) {
+
+		/*
+		 * we  insert one extent at a time. So we need
+		 * credit needed for single extent allocation.
+		 * journalled mode is currently not supported
+		 * by delalloc
+		 */
+		BUG_ON(ext4_should_journal_data(inode));
+		needed_blocks = ext4_da_writepages_trans_blocks(inode);
+
 		/* start a new transaction*/
 		handle = ext4_journal_start(inode, needed_blocks);
 		if (IS_ERR(handle)) {
 			ret = PTR_ERR(handle);
+			printk(KERN_EMERG "%s: jbd2_start: "
+			       "%ld pages, ino %lu; err %d\n", __func__,
+				wbc->nr_to_write, inode->i_ino, ret);
+			dump_stack();
 			goto out_writepages;
 		}
 		if (ext4_should_order_data(inode)) {
 			/*
 			 * With ordered mode we need to add
-			 * the inode to the journal handle
+			 * the inode to the journal handl
 			 * when we do block allocation.
 			 */
 			ret = ext4_jbd2_file_inode(handle, inode);
@@ -2219,20 +2351,20 @@ static int ext4_da_writepages(struct address_space *mapping,
 				ext4_journal_stop(handle);
 				goto out_writepages;
 			}
-
 		}
-		/*
-		 * set the max dirty pages could be write at a time
-		 * to fit into the reserved transaction credits
-		 */
-		if (wbc->nr_to_write > EXT4_MAX_WRITEBACK_PAGES)
-			wbc->nr_to_write = EXT4_MAX_WRITEBACK_PAGES;
 
 		to_write -= wbc->nr_to_write;
 		ret = mpage_da_writepages(mapping, wbc,
-						ext4_da_get_block_write);
+					  ext4_da_get_block_write);
 		ext4_journal_stop(handle);
-		if (wbc->nr_to_write) {
+		if (ret == MPAGE_DA_EXTENT_TAIL) {
+			/*
+			 * got one extent now try with
+			 * rest of the pages
+			 */
+			to_write += wbc->nr_to_write;
+			ret = 0;
+		} else if (wbc->nr_to_write) {
 			/*
 			 * There is no more writeout needed
 			 * or we requested for a noblocking writeout
@@ -2244,10 +2376,18 @@ static int ext4_da_writepages(struct address_space *mapping,
 		wbc->nr_to_write = to_write;
 	}
 
-out_writepages:
-	wbc->nr_to_write = to_write;
-	if (range_start)
+	if (wbc->range_cont && (pages_skipped != wbc->pages_skipped)) {
+		/* We skipped pages in this loop */
 		wbc->range_start = range_start;
+		wbc->nr_to_write = to_write +
+				wbc->pages_skipped - pages_skipped;
+		wbc->pages_skipped = pages_skipped;
+		goto restart_loop;
+	}
+
+out_writepages:
+	wbc->nr_to_write = to_write - nr_to_writebump;
+	wbc->range_start = range_start;
 	return ret;
 }
 
@@ -2280,8 +2420,11 @@ retry:
 	}
 
 	page = __grab_cache_page(mapping, index);
-	if (!page)
-		return -ENOMEM;
+	if (!page) {
+		ext4_journal_stop(handle);
+		ret = -ENOMEM;
+		goto out;
+	}
 	*pagep = page;
 
 	ret = block_write_begin(file, mapping, pos, len, flags, pagep, fsdata,
@@ -2806,59 +2949,63 @@ static int ext4_journalled_set_page_dirty(struct page *page)
 }
 
 static const struct address_space_operations ext4_ordered_aops = {
-	.readpage	= ext4_readpage,
-	.readpages	= ext4_readpages,
-	.writepage	= ext4_normal_writepage,
-	.sync_page	= block_sync_page,
-	.write_begin	= ext4_write_begin,
-	.write_end	= ext4_ordered_write_end,
-	.bmap		= ext4_bmap,
-	.invalidatepage	= ext4_invalidatepage,
-	.releasepage	= ext4_releasepage,
-	.direct_IO	= ext4_direct_IO,
-	.migratepage	= buffer_migrate_page,
+	.readpage		= ext4_readpage,
+	.readpages		= ext4_readpages,
+	.writepage		= ext4_normal_writepage,
+	.sync_page		= block_sync_page,
+	.write_begin		= ext4_write_begin,
+	.write_end		= ext4_ordered_write_end,
+	.bmap			= ext4_bmap,
+	.invalidatepage		= ext4_invalidatepage,
+	.releasepage		= ext4_releasepage,
+	.direct_IO		= ext4_direct_IO,
+	.migratepage		= buffer_migrate_page,
+	.is_partially_uptodate  = block_is_partially_uptodate,
 };
 
 static const struct address_space_operations ext4_writeback_aops = {
-	.readpage	= ext4_readpage,
-	.readpages	= ext4_readpages,
-	.writepage	= ext4_normal_writepage,
-	.sync_page	= block_sync_page,
-	.write_begin	= ext4_write_begin,
-	.write_end	= ext4_writeback_write_end,
-	.bmap		= ext4_bmap,
-	.invalidatepage	= ext4_invalidatepage,
-	.releasepage	= ext4_releasepage,
-	.direct_IO	= ext4_direct_IO,
-	.migratepage	= buffer_migrate_page,
+	.readpage		= ext4_readpage,
+	.readpages		= ext4_readpages,
+	.writepage		= ext4_normal_writepage,
+	.sync_page		= block_sync_page,
+	.write_begin		= ext4_write_begin,
+	.write_end		= ext4_writeback_write_end,
+	.bmap			= ext4_bmap,
+	.invalidatepage		= ext4_invalidatepage,
+	.releasepage		= ext4_releasepage,
+	.direct_IO		= ext4_direct_IO,
+	.migratepage		= buffer_migrate_page,
+	.is_partially_uptodate  = block_is_partially_uptodate,
 };
 
 static const struct address_space_operations ext4_journalled_aops = {
-	.readpage	= ext4_readpage,
-	.readpages	= ext4_readpages,
-	.writepage	= ext4_journalled_writepage,
-	.sync_page	= block_sync_page,
-	.write_begin	= ext4_write_begin,
-	.write_end	= ext4_journalled_write_end,
-	.set_page_dirty	= ext4_journalled_set_page_dirty,
-	.bmap		= ext4_bmap,
-	.invalidatepage	= ext4_invalidatepage,
-	.releasepage	= ext4_releasepage,
+	.readpage		= ext4_readpage,
+	.readpages		= ext4_readpages,
+	.writepage		= ext4_journalled_writepage,
+	.sync_page		= block_sync_page,
+	.write_begin		= ext4_write_begin,
+	.write_end		= ext4_journalled_write_end,
+	.set_page_dirty		= ext4_journalled_set_page_dirty,
+	.bmap			= ext4_bmap,
+	.invalidatepage		= ext4_invalidatepage,
+	.releasepage		= ext4_releasepage,
+	.is_partially_uptodate  = block_is_partially_uptodate,
 };
 
 static const struct address_space_operations ext4_da_aops = {
-	.readpage	= ext4_readpage,
-	.readpages	= ext4_readpages,
-	.writepage	= ext4_da_writepage,
-	.writepages	= ext4_da_writepages,
-	.sync_page	= block_sync_page,
-	.write_begin	= ext4_da_write_begin,
-	.write_end	= ext4_da_write_end,
-	.bmap		= ext4_bmap,
-	.invalidatepage	= ext4_da_invalidatepage,
-	.releasepage	= ext4_releasepage,
-	.direct_IO	= ext4_direct_IO,
-	.migratepage	= buffer_migrate_page,
+	.readpage		= ext4_readpage,
+	.readpages		= ext4_readpages,
+	.writepage		= ext4_da_writepage,
+	.writepages		= ext4_da_writepages,
+	.sync_page		= block_sync_page,
+	.write_begin		= ext4_da_write_begin,
+	.write_end		= ext4_da_write_end,
+	.bmap			= ext4_bmap,
+	.invalidatepage		= ext4_da_invalidatepage,
+	.releasepage		= ext4_releasepage,
+	.direct_IO		= ext4_direct_IO,
+	.migratepage		= buffer_migrate_page,
+	.is_partially_uptodate  = block_is_partially_uptodate,
 };
 
 void ext4_set_aops(struct inode *inode)
@@ -3430,6 +3577,9 @@ void ext4_truncate(struct inode *inode)
 	 * modify the block allocation tree.
 	 */
 	down_write(&ei->i_data_sem);
+
+	ext4_discard_reservation(inode);
+
 	/*
 	 * The orphan list entry will now protect us from any crash which
 	 * occurs before the truncate completes, so it is now safe to propagate
@@ -3499,8 +3649,6 @@ do_indirects:
 		;
 	}
 
-	ext4_discard_reservation(inode);
-
 	up_write(&ei->i_data_sem);
 	inode->i_mtime = inode->i_ctime = ext4_current_time(inode);
 	ext4_mark_inode_dirty(handle, inode);
@@ -3586,6 +3734,16 @@ static int __ext4_get_inode_loc(struct inode *inode,
 	}
 	if (!buffer_uptodate(bh)) {
 		lock_buffer(bh);
+
+		/*
+		 * If the buffer has the write error flag, we have failed
+		 * to write out another inode in the same block.  In this
+		 * case, we don't have to read the block because we may
+		 * read the old inode data successfully.
+		 */
+		if (buffer_write_io_error(bh) && !buffer_uptodate(bh))
+			set_buffer_uptodate(bh);
+
 		if (buffer_uptodate(bh)) {
 			/* someone brought it uptodate while we waited */
 			unlock_buffer(bh);
@@ -4258,57 +4416,129 @@ int ext4_getattr(struct vfsmount *mnt, struct dentry *dentry,
 	return 0;
 }
 
+static int ext4_indirect_trans_blocks(struct inode *inode, int nrblocks,
+				      int chunk)
+{
+	int indirects;
+
+	/* if nrblocks are contiguous */
+	if (chunk) {
+		/*
+		 * With N contiguous data blocks, it need at most
+		 * N/EXT4_ADDR_PER_BLOCK(inode->i_sb) indirect blocks
+		 * 2 dindirect blocks
+		 * 1 tindirect block
+		 */
+		indirects = nrblocks / EXT4_ADDR_PER_BLOCK(inode->i_sb);
+		return indirects + 3;
+	}
+	/*
+	 * if nrblocks are not contiguous, worse case, each block touch
+	 * a indirect block, and each indirect block touch a double indirect
+	 * block, plus a triple indirect block
+	 */
+	indirects = nrblocks * 2 + 1;
+	return indirects;
+}
+
+static int ext4_index_trans_blocks(struct inode *inode, int nrblocks, int chunk)
+{
+	if (!(EXT4_I(inode)->i_flags & EXT4_EXTENTS_FL))
+		return ext4_indirect_trans_blocks(inode, nrblocks, 0);
+	return ext4_ext_index_trans_blocks(inode, nrblocks, 0);
+}
 /*
- * How many blocks doth make a writepage()?
+ * Account for index blocks, block groups bitmaps and block group
+ * descriptor blocks if modify datablocks and index blocks
+ * worse case, the indexs blocks spread over different block groups
  *
- * With N blocks per page, it may be:
- * N data blocks
- * 2 indirect block
- * 2 dindirect
- * 1 tindirect
- * N+5 bitmap blocks (from the above)
- * N+5 group descriptor summary blocks
- * 1 inode block
- * 1 superblock.
- * 2 * EXT4_SINGLEDATA_TRANS_BLOCKS for the quote files
+ * If datablocks are discontiguous, they are possible to spread over
+ * different block groups too. If they are contiugous, with flexbg,
+ * they could still across block group boundary.
  *
- * 3 * (N + 5) + 2 + 2 * EXT4_SINGLEDATA_TRANS_BLOCKS
- *
- * With ordered or writeback data it's the same, less the N data blocks.
+ * Also account for superblock, inode, quota and xattr blocks
+ */
+int ext4_meta_trans_blocks(struct inode *inode, int nrblocks, int chunk)
+{
+	int groups, gdpblocks;
+	int idxblocks;
+	int ret = 0;
+
+	/*
+	 * How many index blocks need to touch to modify nrblocks?
+	 * The "Chunk" flag indicating whether the nrblocks is
+	 * physically contiguous on disk
+	 *
+	 * For Direct IO and fallocate, they calls get_block to allocate
+	 * one single extent at a time, so they could set the "Chunk" flag
+	 */
+	idxblocks = ext4_index_trans_blocks(inode, nrblocks, chunk);
+
+	ret = idxblocks;
+
+	/*
+	 * Now let's see how many group bitmaps and group descriptors need
+	 * to account
+	 */
+	groups = idxblocks;
+	if (chunk)
+		groups += 1;
+	else
+		groups += nrblocks;
+
+	gdpblocks = groups;
+	if (groups > EXT4_SB(inode->i_sb)->s_groups_count)
+		groups = EXT4_SB(inode->i_sb)->s_groups_count;
+	if (groups > EXT4_SB(inode->i_sb)->s_gdb_count)
+		gdpblocks = EXT4_SB(inode->i_sb)->s_gdb_count;
+
+	/* bitmaps and block group descriptor blocks */
+	ret += groups + gdpblocks;
+
+	/* Blocks for super block, inode, quota and xattr blocks */
+	ret += EXT4_META_TRANS_BLOCKS(inode->i_sb);
+
+	return ret;
+}
+
+/*
+ * Calulate the total number of credits to reserve to fit
+ * the modification of a single pages into a single transaction,
+ * which may include multiple chunks of block allocations.
  *
- * If the inode's direct blocks can hold an integral number of pages then a
- * page cannot straddle two indirect blocks, and we can only touch one indirect
- * and dindirect block, and the "5" above becomes "3".
+ * This could be called via ext4_write_begin()
  *
- * This still overestimates under most circumstances.  If we were to pass the
- * start and end offsets in here as well we could do block_to_path() on each
- * block and work out the exact number of indirects which are touched.  Pah.
+ * We need to consider the worse case, when
+ * one new block per extent.
  */
-
 int ext4_writepage_trans_blocks(struct inode *inode)
 {
 	int bpp = ext4_journal_blocks_per_page(inode);
-	int indirects = (EXT4_NDIR_BLOCKS % bpp) ? 5 : 3;
 	int ret;
 
-	if (EXT4_I(inode)->i_flags & EXT4_EXTENTS_FL)
-		return ext4_ext_writepage_trans_blocks(inode, bpp);
+	ret = ext4_meta_trans_blocks(inode, bpp, 0);
 
+	/* Account for data blocks for journalled mode */
 	if (ext4_should_journal_data(inode))
-		ret = 3 * (bpp + indirects) + 2;
-	else
-		ret = 2 * (bpp + indirects) + 2;
-
-#ifdef CONFIG_QUOTA
-	/* We know that structure was already allocated during DQUOT_INIT so
-	 * we will be updating only the data blocks + inodes */
-	ret += 2*EXT4_QUOTA_TRANS_BLOCKS(inode->i_sb);
-#endif
-
+		ret += bpp;
 	return ret;
 }
 
 /*
+ * Calculate the journal credits for a chunk of data modification.
+ *
+ * This is called from DIO, fallocate or whoever calling
+ * ext4_get_blocks_wrap() to map/allocate a chunk of contigous disk blocks.
+ *
+ * journal buffers for data blocks are not included here, as DIO
+ * and fallocate do no need to journal data buffers.
+ */
+int ext4_chunk_trans_blocks(struct inode *inode, int nrblocks)
+{
+	return ext4_meta_trans_blocks(inode, nrblocks, 1);
+}
+
+/*
  * The caller must have previously called ext4_reserve_inode_write().
  * Give this, we know that the caller already has write access to iloc->bh.
  */
diff --git a/fs/ext4/mballoc.c b/fs/ext4/mballoc.c
index 8d141a25bbee..e0e3a5eb1ddb 100644
--- a/fs/ext4/mballoc.c
+++ b/fs/ext4/mballoc.c
@@ -787,13 +787,16 @@ static int ext4_mb_init_cache(struct page *page, char *incore)
 		if (bh_uptodate_or_lock(bh[i]))
 			continue;
 
+		spin_lock(sb_bgl_lock(EXT4_SB(sb), first_group + i));
 		if (desc->bg_flags & cpu_to_le16(EXT4_BG_BLOCK_UNINIT)) {
 			ext4_init_block_bitmap(sb, bh[i],
 						first_group + i, desc);
 			set_buffer_uptodate(bh[i]);
 			unlock_buffer(bh[i]);
+			spin_unlock(sb_bgl_lock(EXT4_SB(sb), first_group + i));
 			continue;
 		}
+		spin_unlock(sb_bgl_lock(EXT4_SB(sb), first_group + i));
 		get_bh(bh[i]);
 		bh[i]->b_end_io = end_buffer_read_sync;
 		submit_bh(READ, bh[i]);
@@ -2477,7 +2480,7 @@ err_freesgi:
 int ext4_mb_init(struct super_block *sb, int needs_recovery)
 {
 	struct ext4_sb_info *sbi = EXT4_SB(sb);
-	unsigned i;
+	unsigned i, j;
 	unsigned offset;
 	unsigned max;
 	int ret;
@@ -2537,7 +2540,7 @@ int ext4_mb_init(struct super_block *sb, int needs_recovery)
 	sbi->s_mb_history_filter = EXT4_MB_HISTORY_DEFAULT;
 	sbi->s_mb_group_prealloc = MB_DEFAULT_GROUP_PREALLOC;
 
-	i = sizeof(struct ext4_locality_group) * NR_CPUS;
+	i = sizeof(struct ext4_locality_group) * nr_cpu_ids;
 	sbi->s_locality_groups = kmalloc(i, GFP_KERNEL);
 	if (sbi->s_locality_groups == NULL) {
 		clear_opt(sbi->s_mount_opt, MBALLOC);
@@ -2545,11 +2548,12 @@ int ext4_mb_init(struct super_block *sb, int needs_recovery)
 		kfree(sbi->s_mb_maxs);
 		return -ENOMEM;
 	}
-	for (i = 0; i < NR_CPUS; i++) {
+	for (i = 0; i < nr_cpu_ids; i++) {
 		struct ext4_locality_group *lg;
 		lg = &sbi->s_locality_groups[i];
 		mutex_init(&lg->lg_mutex);
-		INIT_LIST_HEAD(&lg->lg_prealloc_list);
+		for (j = 0; j < PREALLOC_TB_SIZE; j++)
+			INIT_LIST_HEAD(&lg->lg_prealloc_list[j]);
 		spin_lock_init(&lg->lg_prealloc_lock);
 	}
 
@@ -3260,6 +3264,7 @@ static void ext4_mb_use_group_pa(struct ext4_allocation_context *ac,
 				struct ext4_prealloc_space *pa)
 {
 	unsigned int len = ac->ac_o_ex.fe_len;
+
 	ext4_get_group_no_and_offset(ac->ac_sb, pa->pa_pstart,
 					&ac->ac_b_ex.fe_group,
 					&ac->ac_b_ex.fe_start);
@@ -3277,14 +3282,45 @@ static void ext4_mb_use_group_pa(struct ext4_allocation_context *ac,
 }
 
 /*
+ * Return the prealloc space that have minimal distance
+ * from the goal block. @cpa is the prealloc
+ * space that is having currently known minimal distance
+ * from the goal block.
+ */
+static struct ext4_prealloc_space *
+ext4_mb_check_group_pa(ext4_fsblk_t goal_block,
+			struct ext4_prealloc_space *pa,
+			struct ext4_prealloc_space *cpa)
+{
+	ext4_fsblk_t cur_distance, new_distance;
+
+	if (cpa == NULL) {
+		atomic_inc(&pa->pa_count);
+		return pa;
+	}
+	cur_distance = abs(goal_block - cpa->pa_pstart);
+	new_distance = abs(goal_block - pa->pa_pstart);
+
+	if (cur_distance < new_distance)
+		return cpa;
+
+	/* drop the previous reference */
+	atomic_dec(&cpa->pa_count);
+	atomic_inc(&pa->pa_count);
+	return pa;
+}
+
+/*
  * search goal blocks in preallocated space
  */
 static noinline_for_stack int
 ext4_mb_use_preallocated(struct ext4_allocation_context *ac)
 {
+	int order, i;
 	struct ext4_inode_info *ei = EXT4_I(ac->ac_inode);
 	struct ext4_locality_group *lg;
-	struct ext4_prealloc_space *pa;
+	struct ext4_prealloc_space *pa, *cpa = NULL;
+	ext4_fsblk_t goal_block;
 
 	/* only data can be preallocated */
 	if (!(ac->ac_flags & EXT4_MB_HINT_DATA))
@@ -3322,22 +3358,38 @@ ext4_mb_use_preallocated(struct ext4_allocation_context *ac)
 	lg = ac->ac_lg;
 	if (lg == NULL)
 		return 0;
+	order  = fls(ac->ac_o_ex.fe_len) - 1;
+	if (order > PREALLOC_TB_SIZE - 1)
+		/* The max size of hash table is PREALLOC_TB_SIZE */
+		order = PREALLOC_TB_SIZE - 1;
+
+	goal_block = ac->ac_g_ex.fe_group * EXT4_BLOCKS_PER_GROUP(ac->ac_sb) +
+		     ac->ac_g_ex.fe_start +
+		     le32_to_cpu(EXT4_SB(ac->ac_sb)->s_es->s_first_data_block);
+	/*
+	 * search for the prealloc space that is having
+	 * minimal distance from the goal block.
+	 */
+	for (i = order; i < PREALLOC_TB_SIZE; i++) {
+		rcu_read_lock();
+		list_for_each_entry_rcu(pa, &lg->lg_prealloc_list[i],
+					pa_inode_list) {
+			spin_lock(&pa->pa_lock);
+			if (pa->pa_deleted == 0 &&
+					pa->pa_free >= ac->ac_o_ex.fe_len) {
 
-	rcu_read_lock();
-	list_for_each_entry_rcu(pa, &lg->lg_prealloc_list, pa_inode_list) {
-		spin_lock(&pa->pa_lock);
-		if (pa->pa_deleted == 0 && pa->pa_free >= ac->ac_o_ex.fe_len) {
-			atomic_inc(&pa->pa_count);
-			ext4_mb_use_group_pa(ac, pa);
+				cpa = ext4_mb_check_group_pa(goal_block,
+								pa, cpa);
+			}
 			spin_unlock(&pa->pa_lock);
-			ac->ac_criteria = 20;
-			rcu_read_unlock();
-			return 1;
 		}
-		spin_unlock(&pa->pa_lock);
+		rcu_read_unlock();
+	}
+	if (cpa) {
+		ext4_mb_use_group_pa(ac, cpa);
+		ac->ac_criteria = 20;
+		return 1;
 	}
-	rcu_read_unlock();
-
 	return 0;
 }
 
@@ -3560,6 +3612,7 @@ ext4_mb_new_group_pa(struct ext4_allocation_context *ac)
 	pa->pa_free = pa->pa_len;
 	atomic_set(&pa->pa_count, 1);
 	spin_lock_init(&pa->pa_lock);
+	INIT_LIST_HEAD(&pa->pa_inode_list);
 	pa->pa_deleted = 0;
 	pa->pa_linear = 1;
 
@@ -3580,10 +3633,10 @@ ext4_mb_new_group_pa(struct ext4_allocation_context *ac)
 	list_add(&pa->pa_group_list, &grp->bb_prealloc_list);
 	ext4_unlock_group(sb, ac->ac_b_ex.fe_group);
 
-	spin_lock(pa->pa_obj_lock);
-	list_add_tail_rcu(&pa->pa_inode_list, &lg->lg_prealloc_list);
-	spin_unlock(pa->pa_obj_lock);
-
+	/*
+	 * We will later add the new pa to the right bucket
+	 * after updating the pa_free in ext4_mb_release_context
+	 */
 	return 0;
 }
 
@@ -3733,20 +3786,23 @@ ext4_mb_discard_group_preallocations(struct super_block *sb,
 
 	bitmap_bh = ext4_read_block_bitmap(sb, group);
 	if (bitmap_bh == NULL) {
-		/* error handling here */
-		ext4_mb_release_desc(&e4b);
-		BUG_ON(bitmap_bh == NULL);
+		ext4_error(sb, __func__, "Error in reading block "
+				"bitmap for %lu\n", group);
+		return 0;
 	}
 
 	err = ext4_mb_load_buddy(sb, group, &e4b);
-	BUG_ON(err != 0); /* error handling here */
+	if (err) {
+		ext4_error(sb, __func__, "Error in loading buddy "
+				"information for %lu\n", group);
+		put_bh(bitmap_bh);
+		return 0;
+	}
 
 	if (needed == 0)
 		needed = EXT4_BLOCKS_PER_GROUP(sb) + 1;
 
-	grp = ext4_get_group_info(sb, group);
 	INIT_LIST_HEAD(&list);
-
 	ac = kmem_cache_alloc(ext4_ac_cachep, GFP_NOFS);
 repeat:
 	ext4_lock_group(sb, group);
@@ -3903,13 +3959,18 @@ repeat:
 		ext4_get_group_no_and_offset(sb, pa->pa_pstart, &group, NULL);
 
 		err = ext4_mb_load_buddy(sb, group, &e4b);
-		BUG_ON(err != 0); /* error handling here */
+		if (err) {
+			ext4_error(sb, __func__, "Error in loading buddy "
+					"information for %lu\n", group);
+			continue;
+		}
 
 		bitmap_bh = ext4_read_block_bitmap(sb, group);
 		if (bitmap_bh == NULL) {
-			/* error handling here */
+			ext4_error(sb, __func__, "Error in reading block "
+					"bitmap for %lu\n", group);
 			ext4_mb_release_desc(&e4b);
-			BUG_ON(bitmap_bh == NULL);
+			continue;
 		}
 
 		ext4_lock_group(sb, group);
@@ -4112,22 +4173,168 @@ ext4_mb_initialize_context(struct ext4_allocation_context *ac,
 
 }
 
+static noinline_for_stack void
+ext4_mb_discard_lg_preallocations(struct super_block *sb,
+					struct ext4_locality_group *lg,
+					int order, int total_entries)
+{
+	ext4_group_t group = 0;
+	struct ext4_buddy e4b;
+	struct list_head discard_list;
+	struct ext4_prealloc_space *pa, *tmp;
+	struct ext4_allocation_context *ac;
+
+	mb_debug("discard locality group preallocation\n");
+
+	INIT_LIST_HEAD(&discard_list);
+	ac = kmem_cache_alloc(ext4_ac_cachep, GFP_NOFS);
+
+	spin_lock(&lg->lg_prealloc_lock);
+	list_for_each_entry_rcu(pa, &lg->lg_prealloc_list[order],
+						pa_inode_list) {
+		spin_lock(&pa->pa_lock);
+		if (atomic_read(&pa->pa_count)) {
+			/*
+			 * This is the pa that we just used
+			 * for block allocation. So don't
+			 * free that
+			 */
+			spin_unlock(&pa->pa_lock);
+			continue;
+		}
+		if (pa->pa_deleted) {
+			spin_unlock(&pa->pa_lock);
+			continue;
+		}
+		/* only lg prealloc space */
+		BUG_ON(!pa->pa_linear);
+
+		/* seems this one can be freed ... */
+		pa->pa_deleted = 1;
+		spin_unlock(&pa->pa_lock);
+
+		list_del_rcu(&pa->pa_inode_list);
+		list_add(&pa->u.pa_tmp_list, &discard_list);
+
+		total_entries--;
+		if (total_entries <= 5) {
+			/*
+			 * we want to keep only 5 entries
+			 * allowing it to grow to 8. This
+			 * mak sure we don't call discard
+			 * soon for this list.
+			 */
+			break;
+		}
+	}
+	spin_unlock(&lg->lg_prealloc_lock);
+
+	list_for_each_entry_safe(pa, tmp, &discard_list, u.pa_tmp_list) {
+
+		ext4_get_group_no_and_offset(sb, pa->pa_pstart, &group, NULL);
+		if (ext4_mb_load_buddy(sb, group, &e4b)) {
+			ext4_error(sb, __func__, "Error in loading buddy "
+					"information for %lu\n", group);
+			continue;
+		}
+		ext4_lock_group(sb, group);
+		list_del(&pa->pa_group_list);
+		ext4_mb_release_group_pa(&e4b, pa, ac);
+		ext4_unlock_group(sb, group);
+
+		ext4_mb_release_desc(&e4b);
+		list_del(&pa->u.pa_tmp_list);
+		call_rcu(&(pa)->u.pa_rcu, ext4_mb_pa_callback);
+	}
+	if (ac)
+		kmem_cache_free(ext4_ac_cachep, ac);
+}
+
+/*
+ * We have incremented pa_count. So it cannot be freed at this
+ * point. Also we hold lg_mutex. So no parallel allocation is
+ * possible from this lg. That means pa_free cannot be updated.
+ *
+ * A parallel ext4_mb_discard_group_preallocations is possible.
+ * which can cause the lg_prealloc_list to be updated.
+ */
+
+static void ext4_mb_add_n_trim(struct ext4_allocation_context *ac)
+{
+	int order, added = 0, lg_prealloc_count = 1;
+	struct super_block *sb = ac->ac_sb;
+	struct ext4_locality_group *lg = ac->ac_lg;
+	struct ext4_prealloc_space *tmp_pa, *pa = ac->ac_pa;
+
+	order = fls(pa->pa_free) - 1;
+	if (order > PREALLOC_TB_SIZE - 1)
+		/* The max size of hash table is PREALLOC_TB_SIZE */
+		order = PREALLOC_TB_SIZE - 1;
+	/* Add the prealloc space to lg */
+	rcu_read_lock();
+	list_for_each_entry_rcu(tmp_pa, &lg->lg_prealloc_list[order],
+						pa_inode_list) {
+		spin_lock(&tmp_pa->pa_lock);
+		if (tmp_pa->pa_deleted) {
+			spin_unlock(&pa->pa_lock);
+			continue;
+		}
+		if (!added && pa->pa_free < tmp_pa->pa_free) {
+			/* Add to the tail of the previous entry */
+			list_add_tail_rcu(&pa->pa_inode_list,
+						&tmp_pa->pa_inode_list);
+			added = 1;
+			/*
+			 * we want to count the total
+			 * number of entries in the list
+			 */
+		}
+		spin_unlock(&tmp_pa->pa_lock);
+		lg_prealloc_count++;
+	}
+	if (!added)
+		list_add_tail_rcu(&pa->pa_inode_list,
+					&lg->lg_prealloc_list[order]);
+	rcu_read_unlock();
+
+	/* Now trim the list to be not more than 8 elements */
+	if (lg_prealloc_count > 8) {
+		ext4_mb_discard_lg_preallocations(sb, lg,
+						order, lg_prealloc_count);
+		return;
+	}
+	return ;
+}
+
 /*
  * release all resource we used in allocation
  */
 static int ext4_mb_release_context(struct ext4_allocation_context *ac)
 {
-	if (ac->ac_pa) {
-		if (ac->ac_pa->pa_linear) {
+	struct ext4_prealloc_space *pa = ac->ac_pa;
+	if (pa) {
+		if (pa->pa_linear) {
 			/* see comment in ext4_mb_use_group_pa() */
-			spin_lock(&ac->ac_pa->pa_lock);
-			ac->ac_pa->pa_pstart += ac->ac_b_ex.fe_len;
-			ac->ac_pa->pa_lstart += ac->ac_b_ex.fe_len;
-			ac->ac_pa->pa_free -= ac->ac_b_ex.fe_len;
-			ac->ac_pa->pa_len -= ac->ac_b_ex.fe_len;
-			spin_unlock(&ac->ac_pa->pa_lock);
+			spin_lock(&pa->pa_lock);
+			pa->pa_pstart += ac->ac_b_ex.fe_len;
+			pa->pa_lstart += ac->ac_b_ex.fe_len;
+			pa->pa_free -= ac->ac_b_ex.fe_len;
+			pa->pa_len -= ac->ac_b_ex.fe_len;
+			spin_unlock(&pa->pa_lock);
+			/*
+			 * We want to add the pa to the right bucket.
+			 * Remove it from the list and while adding
+			 * make sure the list to which we are adding
+			 * doesn't grow big.
+			 */
+			if (likely(pa->pa_free)) {
+				spin_lock(pa->pa_obj_lock);
+				list_del_rcu(&pa->pa_inode_list);
+				spin_unlock(pa->pa_obj_lock);
+				ext4_mb_add_n_trim(ac);
+			}
 		}
-		ext4_mb_put_pa(ac, ac->ac_sb, ac->ac_pa);
+		ext4_mb_put_pa(ac, ac->ac_sb, pa);
 	}
 	if (ac->ac_bitmap_page)
 		page_cache_release(ac->ac_bitmap_page);
@@ -4420,11 +4627,15 @@ do_more:
 		count -= overflow;
 	}
 	bitmap_bh = ext4_read_block_bitmap(sb, block_group);
-	if (!bitmap_bh)
+	if (!bitmap_bh) {
+		err = -EIO;
 		goto error_return;
+	}
 	gdp = ext4_get_group_desc(sb, block_group, &gd_bh);
-	if (!gdp)
+	if (!gdp) {
+		err = -EIO;
 		goto error_return;
+	}
 
 	if (in_range(ext4_block_bitmap(sb, gdp), block, count) ||
 	    in_range(ext4_inode_bitmap(sb, gdp), block, count) ||
diff --git a/fs/ext4/mballoc.h b/fs/ext4/mballoc.h
index bfe6add46bcf..c7c9906c2a75 100644
--- a/fs/ext4/mballoc.h
+++ b/fs/ext4/mballoc.h
@@ -164,11 +164,17 @@ struct ext4_free_extent {
  * Locality group:
  *   we try to group all related changes together
  *   so that writeback can flush/allocate them together as well
+ *   Size of lg_prealloc_list hash is determined by MB_DEFAULT_GROUP_PREALLOC
+ *   (512). We store prealloc space into the hash based on the pa_free blocks
+ *   order value.ie, fls(pa_free)-1;
  */
+#define PREALLOC_TB_SIZE 10
 struct ext4_locality_group {
 	/* for allocator */
-	struct mutex		lg_mutex;	/* to serialize allocates */
-	struct list_head	lg_prealloc_list;/* list of preallocations */
+	/* to serialize allocates */
+	struct mutex		lg_mutex;
+	/* list of preallocations */
+	struct list_head	lg_prealloc_list[PREALLOC_TB_SIZE];
 	spinlock_t		lg_prealloc_lock;
 };
 
diff --git a/fs/ext4/migrate.c b/fs/ext4/migrate.c
index b9e077ba07e9..46fc0b5b12ba 100644
--- a/fs/ext4/migrate.c
+++ b/fs/ext4/migrate.c
@@ -53,7 +53,8 @@ static int finish_range(handle_t *handle, struct inode *inode,
 	 * credit. But below we try to not accumalate too much
 	 * of them by restarting the journal.
 	 */
-	needed = ext4_ext_calc_credits_for_insert(inode, path);
+	needed = ext4_ext_calc_credits_for_single_extent(inode,
+		    lb->last_block - lb->first_block + 1, path);
 
 	/*
 	 * Make sure the credit we accumalated is not really high
diff --git a/fs/ext4/resize.c b/fs/ext4/resize.c
index f000fbe2cd93..b3d35604ea18 100644
--- a/fs/ext4/resize.c
+++ b/fs/ext4/resize.c
@@ -73,7 +73,7 @@ static int verify_group_input(struct super_block *sb,
 			     "Inode bitmap not in group (block %llu)",
 			     (unsigned long long)input->inode_bitmap);
 	else if (outside(input->inode_table, start, end) ||
-	         outside(itend - 1, start, end))
+		 outside(itend - 1, start, end))
 		ext4_warning(sb, __func__,
 			     "Inode table not in group (blocks %llu-%llu)",
 			     (unsigned long long)input->inode_table, itend - 1);
@@ -104,7 +104,7 @@ static int verify_group_input(struct super_block *sb,
 			     (unsigned long long)input->inode_bitmap,
 			     start, metaend - 1);
 	else if (inside(input->inode_table, start, metaend) ||
-	         inside(itend - 1, start, metaend))
+		 inside(itend - 1, start, metaend))
 		ext4_warning(sb, __func__,
 			     "Inode table (%llu-%llu) overlaps"
 			     "GDT table (%llu-%llu)",
@@ -158,9 +158,9 @@ static int extend_or_restart_transaction(handle_t *handle, int thresh,
 	if (err) {
 		if ((err = ext4_journal_restart(handle, EXT4_MAX_TRANS_DATA)))
 			return err;
-	        if ((err = ext4_journal_get_write_access(handle, bh)))
+		if ((err = ext4_journal_get_write_access(handle, bh)))
 			return err;
-        }
+	}
 
 	return 0;
 }
@@ -416,11 +416,11 @@ static int add_new_gdb(handle_t *handle, struct inode *inode,
 		       "EXT4-fs: ext4_add_new_gdb: adding group block %lu\n",
 		       gdb_num);
 
-	/*
-	 * If we are not using the primary superblock/GDT copy don't resize,
-	 * because the user tools have no way of handling this.  Probably a
-	 * bad time to do it anyways.
-	 */
+        /*
+         * If we are not using the primary superblock/GDT copy don't resize,
+         * because the user tools have no way of handling this.  Probably a
+         * bad time to do it anyways.
+         */
 	if (EXT4_SB(sb)->s_sbh->b_blocknr !=
 	    le32_to_cpu(EXT4_SB(sb)->s_es->s_first_data_block)) {
 		ext4_warning(sb, __func__,
@@ -507,14 +507,14 @@ static int add_new_gdb(handle_t *handle, struct inode *inode,
 	return 0;
 
 exit_inode:
-	//ext4_journal_release_buffer(handle, iloc.bh);
+	/* ext4_journal_release_buffer(handle, iloc.bh); */
 	brelse(iloc.bh);
 exit_dindj:
-	//ext4_journal_release_buffer(handle, dind);
+	/* ext4_journal_release_buffer(handle, dind); */
 exit_primary:
-	//ext4_journal_release_buffer(handle, *primary);
+	/* ext4_journal_release_buffer(handle, *primary); */
 exit_sbh:
-	//ext4_journal_release_buffer(handle, *primary);
+	/* ext4_journal_release_buffer(handle, *primary); */
 exit_dind:
 	brelse(dind);
 exit_bh:
@@ -773,7 +773,8 @@ int ext4_group_add(struct super_block *sb, struct ext4_new_group_data *input)
 
 	if (reserved_gdb || gdb_off == 0) {
 		if (!EXT4_HAS_COMPAT_FEATURE(sb,
-					     EXT4_FEATURE_COMPAT_RESIZE_INODE)){
+					     EXT4_FEATURE_COMPAT_RESIZE_INODE)
+		    || !le16_to_cpu(es->s_reserved_gdt_blocks)) {
 			ext4_warning(sb, __func__,
 				     "No reserved GDT blocks, can't resize");
 			return -EPERM;
@@ -818,12 +819,12 @@ int ext4_group_add(struct super_block *sb, struct ext4_new_group_data *input)
 	if ((err = ext4_journal_get_write_access(handle, sbi->s_sbh)))
 		goto exit_journal;
 
-	/*
-	 * We will only either add reserved group blocks to a backup group
-	 * or remove reserved blocks for the first group in a new group block.
-	 * Doing both would be mean more complex code, and sane people don't
-	 * use non-sparse filesystems anymore.  This is already checked above.
-	 */
+        /*
+         * We will only either add reserved group blocks to a backup group
+         * or remove reserved blocks for the first group in a new group block.
+         * Doing both would be mean more complex code, and sane people don't
+         * use non-sparse filesystems anymore.  This is already checked above.
+         */
 	if (gdb_off) {
 		primary = sbi->s_group_desc[gdb_num];
 		if ((err = ext4_journal_get_write_access(handle, primary)))
@@ -835,24 +836,24 @@ int ext4_group_add(struct super_block *sb, struct ext4_new_group_data *input)
 	} else if ((err = add_new_gdb(handle, inode, input, &primary)))
 		goto exit_journal;
 
-	/*
-	 * OK, now we've set up the new group.  Time to make it active.
-	 *
-	 * Current kernels don't lock all allocations via lock_super(),
-	 * so we have to be safe wrt. concurrent accesses the group
-	 * data.  So we need to be careful to set all of the relevant
-	 * group descriptor data etc. *before* we enable the group.
-	 *
-	 * The key field here is sbi->s_groups_count: as long as
-	 * that retains its old value, nobody is going to access the new
-	 * group.
-	 *
-	 * So first we update all the descriptor metadata for the new
-	 * group; then we update the total disk blocks count; then we
-	 * update the groups count to enable the group; then finally we
-	 * update the free space counts so that the system can start
-	 * using the new disk blocks.
-	 */
+        /*
+         * OK, now we've set up the new group.  Time to make it active.
+         *
+         * Current kernels don't lock all allocations via lock_super(),
+         * so we have to be safe wrt. concurrent accesses the group
+         * data.  So we need to be careful to set all of the relevant
+         * group descriptor data etc. *before* we enable the group.
+         *
+         * The key field here is sbi->s_groups_count: as long as
+         * that retains its old value, nobody is going to access the new
+         * group.
+         *
+         * So first we update all the descriptor metadata for the new
+         * group; then we update the total disk blocks count; then we
+         * update the groups count to enable the group; then finally we
+         * update the free space counts so that the system can start
+         * using the new disk blocks.
+         */
 
 	/* Update group descriptor block for new group */
 	gdp = (struct ext4_group_desc *)((char *)primary->b_data +
@@ -946,7 +947,8 @@ exit_put:
 	return err;
 } /* ext4_group_add */
 
-/* Extend the filesystem to the new number of blocks specified.  This entry
+/*
+ * Extend the filesystem to the new number of blocks specified.  This entry
  * point is only used to extend the current filesystem to the end of the last
  * existing group.  It can be accessed via ioctl, or by "remount,resize=<size>"
  * for emergencies (because it has no dependencies on reserved blocks).
@@ -1024,7 +1026,7 @@ int ext4_group_extend(struct super_block *sb, struct ext4_super_block *es,
 			     o_blocks_count + add, add);
 
 	/* See if the device is actually as big as what was requested */
-	bh = sb_bread(sb, o_blocks_count + add -1);
+	bh = sb_bread(sb, o_blocks_count + add - 1);
 	if (!bh) {
 		ext4_warning(sb, __func__,
 			     "can't read last block, resize aborted");
diff --git a/fs/ext4/super.c b/fs/ext4/super.c
index 1cb371dcd609..566344b926b7 100644
--- a/fs/ext4/super.c
+++ b/fs/ext4/super.c
@@ -49,20 +49,19 @@ static int ext4_load_journal(struct super_block *, struct ext4_super_block *,
 			     unsigned long journal_devnum);
 static int ext4_create_journal(struct super_block *, struct ext4_super_block *,
 			       unsigned int);
-static void ext4_commit_super (struct super_block * sb,
-			       struct ext4_super_block * es,
-			       int sync);
-static void ext4_mark_recovery_complete(struct super_block * sb,
-					struct ext4_super_block * es);
-static void ext4_clear_journal_err(struct super_block * sb,
-				   struct ext4_super_block * es);
+static void ext4_commit_super(struct super_block *sb,
+			      struct ext4_super_block *es, int sync);
+static void ext4_mark_recovery_complete(struct super_block *sb,
+					struct ext4_super_block *es);
+static void ext4_clear_journal_err(struct super_block *sb,
+				   struct ext4_super_block *es);
 static int ext4_sync_fs(struct super_block *sb, int wait);
-static const char *ext4_decode_error(struct super_block * sb, int errno,
+static const char *ext4_decode_error(struct super_block *sb, int errno,
 				     char nbuf[16]);
-static int ext4_remount (struct super_block * sb, int * flags, char * data);
-static int ext4_statfs (struct dentry * dentry, struct kstatfs * buf);
+static int ext4_remount(struct super_block *sb, int *flags, char *data);
+static int ext4_statfs(struct dentry *dentry, struct kstatfs *buf);
 static void ext4_unlockfs(struct super_block *sb);
-static void ext4_write_super (struct super_block * sb);
+static void ext4_write_super(struct super_block *sb);
 static void ext4_write_super_lockfs(struct super_block *sb);
 
 
@@ -211,15 +210,15 @@ static void ext4_handle_error(struct super_block *sb)
 	if (sb->s_flags & MS_RDONLY)
 		return;
 
-	if (!test_opt (sb, ERRORS_CONT)) {
+	if (!test_opt(sb, ERRORS_CONT)) {
 		journal_t *journal = EXT4_SB(sb)->s_journal;
 
 		EXT4_SB(sb)->s_mount_opt |= EXT4_MOUNT_ABORT;
 		if (journal)
 			jbd2_journal_abort(journal, -EIO);
 	}
-	if (test_opt (sb, ERRORS_RO)) {
-		printk (KERN_CRIT "Remounting filesystem read-only\n");
+	if (test_opt(sb, ERRORS_RO)) {
+		printk(KERN_CRIT "Remounting filesystem read-only\n");
 		sb->s_flags |= MS_RDONLY;
 	}
 	ext4_commit_super(sb, es, 1);
@@ -228,13 +227,13 @@ static void ext4_handle_error(struct super_block *sb)
 			sb->s_id);
 }
 
-void ext4_error (struct super_block * sb, const char * function,
-		 const char * fmt, ...)
+void ext4_error(struct super_block *sb, const char *function,
+		const char *fmt, ...)
 {
 	va_list args;
 
 	va_start(args, fmt);
-	printk(KERN_CRIT "EXT4-fs error (device %s): %s: ",sb->s_id, function);
+	printk(KERN_CRIT "EXT4-fs error (device %s): %s: ", sb->s_id, function);
 	vprintk(fmt, args);
 	printk("\n");
 	va_end(args);
@@ -242,7 +241,7 @@ void ext4_error (struct super_block * sb, const char * function,
 	ext4_handle_error(sb);
 }
 
-static const char *ext4_decode_error(struct super_block * sb, int errno,
+static const char *ext4_decode_error(struct super_block *sb, int errno,
 				     char nbuf[16])
 {
 	char *errstr = NULL;
@@ -278,8 +277,7 @@ static const char *ext4_decode_error(struct super_block * sb, int errno,
 /* __ext4_std_error decodes expected errors from journaling functions
  * automatically and invokes the appropriate error response.  */
 
-void __ext4_std_error (struct super_block * sb, const char * function,
-		       int errno)
+void __ext4_std_error(struct super_block *sb, const char *function, int errno)
 {
 	char nbuf[16];
 	const char *errstr;
@@ -292,8 +290,8 @@ void __ext4_std_error (struct super_block * sb, const char * function,
 		return;
 
 	errstr = ext4_decode_error(sb, errno, nbuf);
-	printk (KERN_CRIT "EXT4-fs error (device %s) in %s: %s\n",
-		sb->s_id, function, errstr);
+	printk(KERN_CRIT "EXT4-fs error (device %s) in %s: %s\n",
+	       sb->s_id, function, errstr);
 
 	ext4_handle_error(sb);
 }
@@ -308,15 +306,15 @@ void __ext4_std_error (struct super_block * sb, const char * function,
  * case we take the easy way out and panic immediately.
  */
 
-void ext4_abort (struct super_block * sb, const char * function,
-		 const char * fmt, ...)
+void ext4_abort(struct super_block *sb, const char *function,
+		const char *fmt, ...)
 {
 	va_list args;
 
-	printk (KERN_CRIT "ext4_abort called.\n");
+	printk(KERN_CRIT "ext4_abort called.\n");
 
 	va_start(args, fmt);
-	printk(KERN_CRIT "EXT4-fs error (device %s): %s: ",sb->s_id, function);
+	printk(KERN_CRIT "EXT4-fs error (device %s): %s: ", sb->s_id, function);
 	vprintk(fmt, args);
 	printk("\n");
 	va_end(args);
@@ -334,8 +332,8 @@ void ext4_abort (struct super_block * sb, const char * function,
 	jbd2_journal_abort(EXT4_SB(sb)->s_journal, -EIO);
 }
 
-void ext4_warning (struct super_block * sb, const char * function,
-		   const char * fmt, ...)
+void ext4_warning(struct super_block *sb, const char *function,
+		  const char *fmt, ...)
 {
 	va_list args;
 
@@ -496,7 +494,7 @@ static void dump_orphan_list(struct super_block *sb, struct ext4_sb_info *sbi)
 	}
 }
 
-static void ext4_put_super (struct super_block * sb)
+static void ext4_put_super(struct super_block *sb)
 {
 	struct ext4_sb_info *sbi = EXT4_SB(sb);
 	struct ext4_super_block *es = sbi->s_es;
@@ -570,6 +568,7 @@ static struct inode *ext4_alloc_inode(struct super_block *sb)
 #endif
 	ei->i_block_alloc_info = NULL;
 	ei->vfs_inode.i_version = 1;
+	ei->vfs_inode.i_data.writeback_index = 0;
 	memset(&ei->i_cached_extent, 0, sizeof(struct ext4_ext_cache));
 	INIT_LIST_HEAD(&ei->i_prealloc_list);
 	spin_lock_init(&ei->i_prealloc_lock);
@@ -595,7 +594,7 @@ static void ext4_destroy_inode(struct inode *inode)
 	kmem_cache_free(ext4_inode_cachep, EXT4_I(inode));
 }
 
-static void init_once(struct kmem_cache *cachep, void *foo)
+static void init_once(void *foo)
 {
 	struct ext4_inode_info *ei = (struct ext4_inode_info *) foo;
 
@@ -647,7 +646,8 @@ static void ext4_clear_inode(struct inode *inode)
 				       &EXT4_I(inode)->jinode);
 }
 
-static inline void ext4_show_quota_options(struct seq_file *seq, struct super_block *sb)
+static inline void ext4_show_quota_options(struct seq_file *seq,
+					   struct super_block *sb)
 {
 #if defined(CONFIG_QUOTA)
 	struct ext4_sb_info *sbi = EXT4_SB(sb);
@@ -822,8 +822,8 @@ static struct dentry *ext4_fh_to_parent(struct super_block *sb, struct fid *fid,
 }
 
 #ifdef CONFIG_QUOTA
-#define QTYPE2NAME(t) ((t)==USRQUOTA?"user":"group")
-#define QTYPE2MOPT(on, t) ((t)==USRQUOTA?((on)##USRJQUOTA):((on)##GRPJQUOTA))
+#define QTYPE2NAME(t) ((t) == USRQUOTA?"user":"group")
+#define QTYPE2MOPT(on, t) ((t) == USRQUOTA?((on)##USRJQUOTA):((on)##GRPJQUOTA))
 
 static int ext4_dquot_initialize(struct inode *inode, int type);
 static int ext4_dquot_drop(struct inode *inode);
@@ -991,12 +991,12 @@ static ext4_fsblk_t get_sb_block(void **data)
 	return sb_block;
 }
 
-static int parse_options (char *options, struct super_block *sb,
-			  unsigned int *inum, unsigned long *journal_devnum,
-			  ext4_fsblk_t *n_blocks_count, int is_remount)
+static int parse_options(char *options, struct super_block *sb,
+			 unsigned int *inum, unsigned long *journal_devnum,
+			 ext4_fsblk_t *n_blocks_count, int is_remount)
 {
 	struct ext4_sb_info *sbi = EXT4_SB(sb);
-	char * p;
+	char *p;
 	substring_t args[MAX_OPT_ARGS];
 	int data_opt = 0;
 	int option;
@@ -1009,7 +1009,7 @@ static int parse_options (char *options, struct super_block *sb,
 	if (!options)
 		return 1;
 
-	while ((p = strsep (&options, ",")) != NULL) {
+	while ((p = strsep(&options, ",")) != NULL) {
 		int token;
 		if (!*p)
 			continue;
@@ -1017,16 +1017,16 @@ static int parse_options (char *options, struct super_block *sb,
 		token = match_token(p, tokens, args);
 		switch (token) {
 		case Opt_bsd_df:
-			clear_opt (sbi->s_mount_opt, MINIX_DF);
+			clear_opt(sbi->s_mount_opt, MINIX_DF);
 			break;
 		case Opt_minix_df:
-			set_opt (sbi->s_mount_opt, MINIX_DF);
+			set_opt(sbi->s_mount_opt, MINIX_DF);
 			break;
 		case Opt_grpid:
-			set_opt (sbi->s_mount_opt, GRPID);
+			set_opt(sbi->s_mount_opt, GRPID);
 			break;
 		case Opt_nogrpid:
-			clear_opt (sbi->s_mount_opt, GRPID);
+			clear_opt(sbi->s_mount_opt, GRPID);
 			break;
 		case Opt_resuid:
 			if (match_int(&args[0], &option))
@@ -1043,41 +1043,41 @@ static int parse_options (char *options, struct super_block *sb,
 			/* *sb_block = match_int(&args[0]); */
 			break;
 		case Opt_err_panic:
-			clear_opt (sbi->s_mount_opt, ERRORS_CONT);
-			clear_opt (sbi->s_mount_opt, ERRORS_RO);
-			set_opt (sbi->s_mount_opt, ERRORS_PANIC);
+			clear_opt(sbi->s_mount_opt, ERRORS_CONT);
+			clear_opt(sbi->s_mount_opt, ERRORS_RO);
+			set_opt(sbi->s_mount_opt, ERRORS_PANIC);
 			break;
 		case Opt_err_ro:
-			clear_opt (sbi->s_mount_opt, ERRORS_CONT);
-			clear_opt (sbi->s_mount_opt, ERRORS_PANIC);
-			set_opt (sbi->s_mount_opt, ERRORS_RO);
+			clear_opt(sbi->s_mount_opt, ERRORS_CONT);
+			clear_opt(sbi->s_mount_opt, ERRORS_PANIC);
+			set_opt(sbi->s_mount_opt, ERRORS_RO);
 			break;
 		case Opt_err_cont:
-			clear_opt (sbi->s_mount_opt, ERRORS_RO);
-			clear_opt (sbi->s_mount_opt, ERRORS_PANIC);
-			set_opt (sbi->s_mount_opt, ERRORS_CONT);
+			clear_opt(sbi->s_mount_opt, ERRORS_RO);
+			clear_opt(sbi->s_mount_opt, ERRORS_PANIC);
+			set_opt(sbi->s_mount_opt, ERRORS_CONT);
 			break;
 		case Opt_nouid32:
-			set_opt (sbi->s_mount_opt, NO_UID32);
+			set_opt(sbi->s_mount_opt, NO_UID32);
 			break;
 		case Opt_nocheck:
-			clear_opt (sbi->s_mount_opt, CHECK);
+			clear_opt(sbi->s_mount_opt, CHECK);
 			break;
 		case Opt_debug:
-			set_opt (sbi->s_mount_opt, DEBUG);
+			set_opt(sbi->s_mount_opt, DEBUG);
 			break;
 		case Opt_oldalloc:
-			set_opt (sbi->s_mount_opt, OLDALLOC);
+			set_opt(sbi->s_mount_opt, OLDALLOC);
 			break;
 		case Opt_orlov:
-			clear_opt (sbi->s_mount_opt, OLDALLOC);
+			clear_opt(sbi->s_mount_opt, OLDALLOC);
 			break;
 #ifdef CONFIG_EXT4DEV_FS_XATTR
 		case Opt_user_xattr:
-			set_opt (sbi->s_mount_opt, XATTR_USER);
+			set_opt(sbi->s_mount_opt, XATTR_USER);
 			break;
 		case Opt_nouser_xattr:
-			clear_opt (sbi->s_mount_opt, XATTR_USER);
+			clear_opt(sbi->s_mount_opt, XATTR_USER);
 			break;
 #else
 		case Opt_user_xattr:
@@ -1115,7 +1115,7 @@ static int parse_options (char *options, struct super_block *sb,
 				       "journal on remount\n");
 				return 0;
 			}
-			set_opt (sbi->s_mount_opt, UPDATE_JOURNAL);
+			set_opt(sbi->s_mount_opt, UPDATE_JOURNAL);
 			break;
 		case Opt_journal_inum:
 			if (is_remount) {
@@ -1145,7 +1145,7 @@ static int parse_options (char *options, struct super_block *sb,
 			set_opt(sbi->s_mount_opt, JOURNAL_CHECKSUM);
 			break;
 		case Opt_noload:
-			set_opt (sbi->s_mount_opt, NOLOAD);
+			set_opt(sbi->s_mount_opt, NOLOAD);
 			break;
 		case Opt_commit:
 			if (match_int(&args[0], &option))
@@ -1331,7 +1331,7 @@ set_qf_format:
 					"on this filesystem, use tune2fs\n");
 				return 0;
 			}
-			set_opt (sbi->s_mount_opt, EXTENTS);
+			set_opt(sbi->s_mount_opt, EXTENTS);
 			break;
 		case Opt_noextents:
 			/*
@@ -1348,7 +1348,7 @@ set_qf_format:
 						"-o noextents options\n");
 				return 0;
 			}
-			clear_opt (sbi->s_mount_opt, EXTENTS);
+			clear_opt(sbi->s_mount_opt, EXTENTS);
 			break;
 		case Opt_i_version:
 			set_opt(sbi->s_mount_opt, I_VERSION);
@@ -1374,9 +1374,9 @@ set_qf_format:
 			set_opt(sbi->s_mount_opt, DELALLOC);
 			break;
 		default:
-			printk (KERN_ERR
-				"EXT4-fs: Unrecognized mount option \"%s\" "
-				"or missing value\n", p);
+			printk(KERN_ERR
+			       "EXT4-fs: Unrecognized mount option \"%s\" "
+			       "or missing value\n", p);
 			return 0;
 		}
 	}
@@ -1423,31 +1423,31 @@ static int ext4_setup_super(struct super_block *sb, struct ext4_super_block *es,
 	int res = 0;
 
 	if (le32_to_cpu(es->s_rev_level) > EXT4_MAX_SUPP_REV) {
-		printk (KERN_ERR "EXT4-fs warning: revision level too high, "
-			"forcing read-only mode\n");
+		printk(KERN_ERR "EXT4-fs warning: revision level too high, "
+		       "forcing read-only mode\n");
 		res = MS_RDONLY;
 	}
 	if (read_only)
 		return res;
 	if (!(sbi->s_mount_state & EXT4_VALID_FS))
-		printk (KERN_WARNING "EXT4-fs warning: mounting unchecked fs, "
-			"running e2fsck is recommended\n");
+		printk(KERN_WARNING "EXT4-fs warning: mounting unchecked fs, "
+		       "running e2fsck is recommended\n");
 	else if ((sbi->s_mount_state & EXT4_ERROR_FS))
-		printk (KERN_WARNING
-			"EXT4-fs warning: mounting fs with errors, "
-			"running e2fsck is recommended\n");
+		printk(KERN_WARNING
+		       "EXT4-fs warning: mounting fs with errors, "
+		       "running e2fsck is recommended\n");
 	else if ((__s16) le16_to_cpu(es->s_max_mnt_count) >= 0 &&
 		 le16_to_cpu(es->s_mnt_count) >=
 		 (unsigned short) (__s16) le16_to_cpu(es->s_max_mnt_count))
-		printk (KERN_WARNING
-			"EXT4-fs warning: maximal mount count reached, "
-			"running e2fsck is recommended\n");
+		printk(KERN_WARNING
+		       "EXT4-fs warning: maximal mount count reached, "
+		       "running e2fsck is recommended\n");
 	else if (le32_to_cpu(es->s_checkinterval) &&
 		(le32_to_cpu(es->s_lastcheck) +
 			le32_to_cpu(es->s_checkinterval) <= get_seconds()))
-		printk (KERN_WARNING
-			"EXT4-fs warning: checktime reached, "
-			"running e2fsck is recommended\n");
+		printk(KERN_WARNING
+		       "EXT4-fs warning: checktime reached, "
+		       "running e2fsck is recommended\n");
 #if 0
 		/* @@@ We _will_ want to clear the valid bit if we find
 		 * inconsistencies, to force a fsck at reboot.  But for
@@ -1506,14 +1506,13 @@ static int ext4_fill_flex_info(struct super_block *sb)
 
 	flex_group_count = (sbi->s_groups_count + groups_per_flex - 1) /
 		groups_per_flex;
-	sbi->s_flex_groups = kmalloc(flex_group_count *
+	sbi->s_flex_groups = kzalloc(flex_group_count *
 				     sizeof(struct flex_groups), GFP_KERNEL);
 	if (sbi->s_flex_groups == NULL) {
-		printk(KERN_ERR "EXT4-fs: not enough memory\n");
+		printk(KERN_ERR "EXT4-fs: not enough memory for "
+				"%lu flex groups\n", flex_group_count);
 		goto failed;
 	}
-	memset(sbi->s_flex_groups, 0, flex_group_count *
-	       sizeof(struct flex_groups));
 
 	gdp = ext4_get_group_desc(sb, 1, &bh);
 	block_bitmap = ext4_block_bitmap(sb, gdp) - 1;
@@ -1597,16 +1596,14 @@ static int ext4_check_descriptors(struct super_block *sb)
 				(EXT4_BLOCKS_PER_GROUP(sb) - 1);
 
 		block_bitmap = ext4_block_bitmap(sb, gdp);
-		if (block_bitmap < first_block || block_bitmap > last_block)
-		{
+		if (block_bitmap < first_block || block_bitmap > last_block) {
 			printk(KERN_ERR "EXT4-fs: ext4_check_descriptors: "
 			       "Block bitmap for group %lu not in group "
 			       "(block %llu)!", i, block_bitmap);
 			return 0;
 		}
 		inode_bitmap = ext4_inode_bitmap(sb, gdp);
-		if (inode_bitmap < first_block || inode_bitmap > last_block)
-		{
+		if (inode_bitmap < first_block || inode_bitmap > last_block) {
 			printk(KERN_ERR "EXT4-fs: ext4_check_descriptors: "
 			       "Inode bitmap for group %lu not in group "
 			       "(block %llu)!", i, inode_bitmap);
@@ -1614,26 +1611,28 @@ static int ext4_check_descriptors(struct super_block *sb)
 		}
 		inode_table = ext4_inode_table(sb, gdp);
 		if (inode_table < first_block ||
-		    inode_table + sbi->s_itb_per_group - 1 > last_block)
-		{
+		    inode_table + sbi->s_itb_per_group - 1 > last_block) {
 			printk(KERN_ERR "EXT4-fs: ext4_check_descriptors: "
 			       "Inode table for group %lu not in group "
 			       "(block %llu)!", i, inode_table);
 			return 0;
 		}
+		spin_lock(sb_bgl_lock(sbi, i));
 		if (!ext4_group_desc_csum_verify(sbi, i, gdp)) {
 			printk(KERN_ERR "EXT4-fs: ext4_check_descriptors: "
 			       "Checksum for group %lu failed (%u!=%u)\n",
 			       i, le16_to_cpu(ext4_group_desc_csum(sbi, i,
 			       gdp)), le16_to_cpu(gdp->bg_checksum));
-			return 0;
+			if (!(sb->s_flags & MS_RDONLY))
+				return 0;
 		}
+		spin_unlock(sb_bgl_lock(sbi, i));
 		if (!flexbg_flag)
 			first_block += EXT4_BLOCKS_PER_GROUP(sb);
 	}
 
 	ext4_free_blocks_count_set(sbi->s_es, ext4_count_free_blocks(sb));
-	sbi->s_es->s_free_inodes_count=cpu_to_le32(ext4_count_free_inodes(sb));
+	sbi->s_es->s_free_inodes_count = cpu_to_le32(ext4_count_free_inodes(sb));
 	return 1;
 }
 
@@ -1654,8 +1653,8 @@ static int ext4_check_descriptors(struct super_block *sb)
  * e2fsck was run on this filesystem, and it must have already done the orphan
  * inode cleanup for us, so we can safely abort without any further action.
  */
-static void ext4_orphan_cleanup (struct super_block * sb,
-				 struct ext4_super_block * es)
+static void ext4_orphan_cleanup(struct super_block *sb,
+				struct ext4_super_block *es)
 {
 	unsigned int s_flags = sb->s_flags;
 	int nr_orphans = 0, nr_truncates = 0;
@@ -1732,7 +1731,7 @@ static void ext4_orphan_cleanup (struct super_block * sb,
 		iput(inode);  /* The delete magic happens here! */
 	}
 
-#define PLURAL(x) (x), ((x)==1) ? "" : "s"
+#define PLURAL(x) (x), ((x) == 1) ? "" : "s"
 
 	if (nr_orphans)
 		printk(KERN_INFO "EXT4-fs: %s: %d orphan inode%s deleted\n",
@@ -1899,12 +1898,12 @@ static unsigned long ext4_get_stripe_size(struct ext4_sb_info *sbi)
 	return 0;
 }
 
-static int ext4_fill_super (struct super_block *sb, void *data, int silent)
+static int ext4_fill_super(struct super_block *sb, void *data, int silent)
 				__releases(kernel_lock)
 				__acquires(kernel_lock)
 
 {
-	struct buffer_head * bh;
+	struct buffer_head *bh;
 	struct ext4_super_block *es = NULL;
 	struct ext4_sb_info *sbi;
 	ext4_fsblk_t block;
@@ -1953,7 +1952,7 @@ static int ext4_fill_super (struct super_block *sb, void *data, int silent)
 	}
 
 	if (!(bh = sb_bread(sb, logical_sb_block))) {
-		printk (KERN_ERR "EXT4-fs: unable to read superblock\n");
+		printk(KERN_ERR "EXT4-fs: unable to read superblock\n");
 		goto out_fail;
 	}
 	/*
@@ -2026,8 +2025,8 @@ static int ext4_fill_super (struct super_block *sb, void *data, int silent)
 	set_opt(sbi->s_mount_opt, DELALLOC);
 
 
-	if (!parse_options ((char *) data, sb, &journal_inum, &journal_devnum,
-			    NULL, 0))
+	if (!parse_options((char *) data, sb, &journal_inum, &journal_devnum,
+			   NULL, 0))
 		goto failed_mount;
 
 	sb->s_flags = (sb->s_flags & ~MS_POSIXACL) |
@@ -2102,7 +2101,7 @@ static int ext4_fill_super (struct super_block *sb, void *data, int silent)
 			goto failed_mount;
 		}
 
-		brelse (bh);
+		brelse(bh);
 		logical_sb_block = sb_block * EXT4_MIN_BLOCK_SIZE;
 		offset = do_div(logical_sb_block, blocksize);
 		bh = sb_bread(sb, logical_sb_block);
@@ -2114,8 +2113,8 @@ static int ext4_fill_super (struct super_block *sb, void *data, int silent)
 		es = (struct ext4_super_block *)(((char *)bh->b_data) + offset);
 		sbi->s_es = es;
 		if (es->s_magic != cpu_to_le16(EXT4_SUPER_MAGIC)) {
-			printk (KERN_ERR
-				"EXT4-fs: Magic mismatch, very weird !\n");
+			printk(KERN_ERR
+			       "EXT4-fs: Magic mismatch, very weird !\n");
 			goto failed_mount;
 		}
 	}
@@ -2132,9 +2131,9 @@ static int ext4_fill_super (struct super_block *sb, void *data, int silent)
 		if ((sbi->s_inode_size < EXT4_GOOD_OLD_INODE_SIZE) ||
 		    (!is_power_of_2(sbi->s_inode_size)) ||
 		    (sbi->s_inode_size > blocksize)) {
-			printk (KERN_ERR
-				"EXT4-fs: unsupported inode size: %d\n",
-				sbi->s_inode_size);
+			printk(KERN_ERR
+			       "EXT4-fs: unsupported inode size: %d\n",
+			       sbi->s_inode_size);
 			goto failed_mount;
 		}
 		if (sbi->s_inode_size > EXT4_GOOD_OLD_INODE_SIZE)
@@ -2166,20 +2165,20 @@ static int ext4_fill_super (struct super_block *sb, void *data, int silent)
 	sbi->s_mount_state = le16_to_cpu(es->s_state);
 	sbi->s_addr_per_block_bits = ilog2(EXT4_ADDR_PER_BLOCK(sb));
 	sbi->s_desc_per_block_bits = ilog2(EXT4_DESC_PER_BLOCK(sb));
-	for (i=0; i < 4; i++)
+	for (i = 0; i < 4; i++)
 		sbi->s_hash_seed[i] = le32_to_cpu(es->s_hash_seed[i]);
 	sbi->s_def_hash_version = es->s_def_hash_version;
 
 	if (sbi->s_blocks_per_group > blocksize * 8) {
-		printk (KERN_ERR
-			"EXT4-fs: #blocks per group too big: %lu\n",
-			sbi->s_blocks_per_group);
+		printk(KERN_ERR
+		       "EXT4-fs: #blocks per group too big: %lu\n",
+		       sbi->s_blocks_per_group);
 		goto failed_mount;
 	}
 	if (sbi->s_inodes_per_group > blocksize * 8) {
-		printk (KERN_ERR
-			"EXT4-fs: #inodes per group too big: %lu\n",
-			sbi->s_inodes_per_group);
+		printk(KERN_ERR
+		       "EXT4-fs: #inodes per group too big: %lu\n",
+		       sbi->s_inodes_per_group);
 		goto failed_mount;
 	}
 
@@ -2213,10 +2212,10 @@ static int ext4_fill_super (struct super_block *sb, void *data, int silent)
 	sbi->s_groups_count = blocks_count;
 	db_count = (sbi->s_groups_count + EXT4_DESC_PER_BLOCK(sb) - 1) /
 		   EXT4_DESC_PER_BLOCK(sb);
-	sbi->s_group_desc = kmalloc(db_count * sizeof (struct buffer_head *),
+	sbi->s_group_desc = kmalloc(db_count * sizeof(struct buffer_head *),
 				    GFP_KERNEL);
 	if (sbi->s_group_desc == NULL) {
-		printk (KERN_ERR "EXT4-fs: not enough memory\n");
+		printk(KERN_ERR "EXT4-fs: not enough memory\n");
 		goto failed_mount;
 	}
 
@@ -2226,13 +2225,13 @@ static int ext4_fill_super (struct super_block *sb, void *data, int silent)
 		block = descriptor_loc(sb, logical_sb_block, i);
 		sbi->s_group_desc[i] = sb_bread(sb, block);
 		if (!sbi->s_group_desc[i]) {
-			printk (KERN_ERR "EXT4-fs: "
-				"can't read group descriptor %d\n", i);
+			printk(KERN_ERR "EXT4-fs: "
+			       "can't read group descriptor %d\n", i);
 			db_count = i;
 			goto failed_mount2;
 		}
 	}
-	if (!ext4_check_descriptors (sb)) {
+	if (!ext4_check_descriptors(sb)) {
 		printk(KERN_ERR "EXT4-fs: group descriptors corrupted!\n");
 		goto failed_mount2;
 	}
@@ -2308,11 +2307,11 @@ static int ext4_fill_super (struct super_block *sb, void *data, int silent)
 		    EXT4_SB(sb)->s_journal->j_failed_commit) {
 			printk(KERN_CRIT "EXT4-fs error (device %s): "
 			       "ext4_fill_super: Journal transaction "
-			       "%u is corrupt\n", sb->s_id, 
+			       "%u is corrupt\n", sb->s_id,
 			       EXT4_SB(sb)->s_journal->j_failed_commit);
-			if (test_opt (sb, ERRORS_RO)) {
-				printk (KERN_CRIT
-					"Mounting filesystem read-only\n");
+			if (test_opt(sb, ERRORS_RO)) {
+				printk(KERN_CRIT
+				       "Mounting filesystem read-only\n");
 				sb->s_flags |= MS_RDONLY;
 				EXT4_SB(sb)->s_mount_state |= EXT4_ERROR_FS;
 				es->s_state |= cpu_to_le16(EXT4_ERROR_FS);
@@ -2332,9 +2331,9 @@ static int ext4_fill_super (struct super_block *sb, void *data, int silent)
 			goto failed_mount3;
 	} else {
 		if (!silent)
-			printk (KERN_ERR
-				"ext4: No journal on filesystem on %s\n",
-				sb->s_id);
+			printk(KERN_ERR
+			       "ext4: No journal on filesystem on %s\n",
+			       sb->s_id);
 		goto failed_mount3;
 	}
 
@@ -2418,7 +2417,7 @@ static int ext4_fill_super (struct super_block *sb, void *data, int silent)
 		goto failed_mount4;
 	}
 
-	ext4_setup_super (sb, es, sb->s_flags & MS_RDONLY);
+	ext4_setup_super(sb, es, sb->s_flags & MS_RDONLY);
 
 	/* determine the minimum size of new large inodes, if present */
 	if (sbi->s_inode_size > EXT4_GOOD_OLD_INODE_SIZE) {
@@ -2457,12 +2456,12 @@ static int ext4_fill_super (struct super_block *sb, void *data, int silent)
 	ext4_orphan_cleanup(sb, es);
 	EXT4_SB(sb)->s_mount_state &= ~EXT4_ORPHAN_FS;
 	if (needs_recovery)
-		printk (KERN_INFO "EXT4-fs: recovery complete.\n");
+		printk(KERN_INFO "EXT4-fs: recovery complete.\n");
 	ext4_mark_recovery_complete(sb, es);
-	printk (KERN_INFO "EXT4-fs: mounted filesystem with %s data mode.\n",
-		test_opt(sb,DATA_FLAGS) == EXT4_MOUNT_JOURNAL_DATA ? "journal":
-		test_opt(sb,DATA_FLAGS) == EXT4_MOUNT_ORDERED_DATA ? "ordered":
-		"writeback");
+	printk(KERN_INFO "EXT4-fs: mounted filesystem with %s data mode.\n",
+	       test_opt(sb, DATA_FLAGS) == EXT4_MOUNT_JOURNAL_DATA ? "journal":
+	       test_opt(sb, DATA_FLAGS) == EXT4_MOUNT_ORDERED_DATA ? "ordered":
+	       "writeback");
 
 	if (test_opt(sb, DATA_FLAGS) == EXT4_MOUNT_JOURNAL_DATA) {
 		printk(KERN_WARNING "EXT4-fs: Ignoring delalloc option - "
@@ -2575,14 +2574,14 @@ static journal_t *ext4_get_journal(struct super_block *sb,
 static journal_t *ext4_get_dev_journal(struct super_block *sb,
 				       dev_t j_dev)
 {
-	struct buffer_head * bh;
+	struct buffer_head *bh;
 	journal_t *journal;
 	ext4_fsblk_t start;
 	ext4_fsblk_t len;
 	int hblock, blocksize;
 	ext4_fsblk_t sb_block;
 	unsigned long offset;
-	struct ext4_super_block * es;
+	struct ext4_super_block *es;
 	struct block_device *bdev;
 
 	bdev = ext4_blkdev_get(j_dev);
@@ -2697,8 +2696,8 @@ static int ext4_load_journal(struct super_block *sb,
 					"unavailable, cannot proceed.\n");
 				return -EROFS;
 			}
-			printk (KERN_INFO "EXT4-fs: write access will "
-					"be enabled during recovery.\n");
+			printk(KERN_INFO "EXT4-fs: write access will "
+			       "be enabled during recovery.\n");
 		}
 	}
 
@@ -2751,8 +2750,8 @@ static int ext4_load_journal(struct super_block *sb,
 	return 0;
 }
 
-static int ext4_create_journal(struct super_block * sb,
-			       struct ext4_super_block * es,
+static int ext4_create_journal(struct super_block *sb,
+			       struct ext4_super_block *es,
 			       unsigned int journal_inum)
 {
 	journal_t *journal;
@@ -2793,9 +2792,8 @@ static int ext4_create_journal(struct super_block * sb,
 	return 0;
 }
 
-static void ext4_commit_super (struct super_block * sb,
-			       struct ext4_super_block * es,
-			       int sync)
+static void ext4_commit_super(struct super_block *sb,
+			      struct ext4_super_block *es, int sync)
 {
 	struct buffer_head *sbh = EXT4_SB(sb)->s_sbh;
 
@@ -2816,8 +2814,8 @@ static void ext4_commit_super (struct super_block * sb,
  * remounting) the filesystem readonly, then we will end up with a
  * consistent fs on disk.  Record that fact.
  */
-static void ext4_mark_recovery_complete(struct super_block * sb,
-					struct ext4_super_block * es)
+static void ext4_mark_recovery_complete(struct super_block *sb,
+					struct ext4_super_block *es)
 {
 	journal_t *journal = EXT4_SB(sb)->s_journal;
 
@@ -2839,8 +2837,8 @@ static void ext4_mark_recovery_complete(struct super_block * sb,
  * has recorded an error from a previous lifetime, move that error to the
  * main filesystem now.
  */
-static void ext4_clear_journal_err(struct super_block * sb,
-				   struct ext4_super_block * es)
+static void ext4_clear_journal_err(struct super_block *sb,
+				   struct ext4_super_block *es)
 {
 	journal_t *journal;
 	int j_errno;
@@ -2865,7 +2863,7 @@ static void ext4_clear_journal_err(struct super_block * sb,
 
 		EXT4_SB(sb)->s_mount_state |= EXT4_ERROR_FS;
 		es->s_state |= cpu_to_le16(EXT4_ERROR_FS);
-		ext4_commit_super (sb, es, 1);
+		ext4_commit_super(sb, es, 1);
 
 		jbd2_journal_clear_err(journal);
 	}
@@ -2898,7 +2896,7 @@ int ext4_force_commit(struct super_block *sb)
  * This implicitly triggers the writebehind on sync().
  */
 
-static void ext4_write_super (struct super_block * sb)
+static void ext4_write_super(struct super_block *sb)
 {
 	if (mutex_trylock(&sb->s_lock) != 0)
 		BUG();
@@ -2954,13 +2952,14 @@ static void ext4_unlockfs(struct super_block *sb)
 	}
 }
 
-static int ext4_remount (struct super_block * sb, int * flags, char * data)
+static int ext4_remount(struct super_block *sb, int *flags, char *data)
 {
-	struct ext4_super_block * es;
+	struct ext4_super_block *es;
 	struct ext4_sb_info *sbi = EXT4_SB(sb);
 	ext4_fsblk_t n_blocks_count = 0;
 	unsigned long old_sb_flags;
 	struct ext4_mount_options old_opts;
+	ext4_group_t g;
 	int err;
 #ifdef CONFIG_QUOTA
 	int i;
@@ -3039,6 +3038,26 @@ static int ext4_remount (struct super_block * sb, int * flags, char * data)
 			}
 
 			/*
+			 * Make sure the group descriptor checksums
+			 * are sane.  If they aren't, refuse to
+			 * remount r/w.
+			 */
+			for (g = 0; g < sbi->s_groups_count; g++) {
+				struct ext4_group_desc *gdp =
+					ext4_get_group_desc(sb, g, NULL);
+
+				if (!ext4_group_desc_csum_verify(sbi, g, gdp)) {
+					printk(KERN_ERR
+	       "EXT4-fs: ext4_remount: "
+		"Checksum for group %lu failed (%u!=%u)\n",
+		g, le16_to_cpu(ext4_group_desc_csum(sbi, g, gdp)),
+					       le16_to_cpu(gdp->bg_checksum));
+					err = -EINVAL;
+					goto restore_opts;
+				}
+			}
+
+			/*
 			 * If we have an unprocessed orphan list hanging
 			 * around from a previously readonly bdev mount,
 			 * require a full umount/remount for now.
@@ -3063,7 +3082,7 @@ static int ext4_remount (struct super_block * sb, int * flags, char * data)
 			sbi->s_mount_state = le16_to_cpu(es->s_state);
 			if ((err = ext4_group_extend(sb, es, n_blocks_count)))
 				goto restore_opts;
-			if (!ext4_setup_super (sb, es, 0))
+			if (!ext4_setup_super(sb, es, 0))
 				sb->s_flags &= ~MS_RDONLY;
 		}
 	}
@@ -3093,7 +3112,7 @@ restore_opts:
 	return err;
 }
 
-static int ext4_statfs (struct dentry * dentry, struct kstatfs * buf)
+static int ext4_statfs(struct dentry *dentry, struct kstatfs *buf)
 {
 	struct super_block *sb = dentry->d_sb;
 	struct ext4_sb_info *sbi = EXT4_SB(sb);
@@ -3331,12 +3350,12 @@ static int ext4_quota_on(struct super_block *sb, int type, int format_id,
 	}
 	/* Journaling quota? */
 	if (EXT4_SB(sb)->s_qf_names[type]) {
-		/* Quotafile not of fs root? */
+		/* Quotafile not in fs root? */
 		if (nd.path.dentry->d_parent->d_inode != sb->s_root->d_inode)
 			printk(KERN_WARNING
 				"EXT4-fs: Quota file not on filesystem root. "
 				"Journaled quota will not work.\n");
- 	}
+	}
 
 	/*
 	 * When we journal data on quota file, we have to flush journal to see
@@ -3352,8 +3371,9 @@ static int ext4_quota_on(struct super_block *sb, int type, int format_id,
 		jbd2_journal_unlock_updates(EXT4_SB(sb)->s_journal);
 	}
 
+	err = vfs_quota_on_path(sb, type, format_id, &nd.path);
 	path_put(&nd.path);
-	return vfs_quota_on(sb, type, format_id, path, remount);
+	return err;
 }
 
 /* Read data from quotafile - avoid pagecache and such because we cannot afford
diff --git a/fs/ext4/xattr.c b/fs/ext4/xattr.c
index 93c5fdcdad2e..8954208b4893 100644
--- a/fs/ext4/xattr.c
+++ b/fs/ext4/xattr.c
@@ -1512,7 +1512,7 @@ static inline void ext4_xattr_hash_entry(struct ext4_xattr_header *header,
 	char *name = entry->e_name;
 	int n;
 
-	for (n=0; n < entry->e_name_len; n++) {
+	for (n = 0; n < entry->e_name_len; n++) {
 		hash = (hash << NAME_HASH_SHIFT) ^
 		       (hash >> (8*sizeof(hash) - NAME_HASH_SHIFT)) ^
 		       *name++;
diff --git a/fs/fat/cache.c b/fs/fat/cache.c
index 3a9ecac8d61f..3222f51c41cf 100644
--- a/fs/fat/cache.c
+++ b/fs/fat/cache.c
@@ -36,7 +36,7 @@ static inline int fat_max_cache(struct inode *inode)
 
 static struct kmem_cache *fat_cache_cachep;
 
-static void init_once(struct kmem_cache *cachep, void *foo)
+static void init_once(void *foo)
 {
 	struct fat_cache *cache = (struct fat_cache *)foo;
 
diff --git a/fs/fat/dir.c b/fs/fat/dir.c
index 34541d06e626..cd4a0162e10d 100644
--- a/fs/fat/dir.c
+++ b/fs/fat/dir.c
@@ -17,7 +17,6 @@
 #include <linux/slab.h>
 #include <linux/time.h>
 #include <linux/msdos_fs.h>
-#include <linux/dirent.h>
 #include <linux/smp_lock.h>
 #include <linux/buffer_head.h>
 #include <linux/compat.h>
@@ -124,10 +123,11 @@ static inline int fat_get_entry(struct inode *dir, loff_t *pos,
  * but ignore that right now.
  * Ahem... Stack smashing in ring 0 isn't fun. Fixed.
  */
-static int uni16_to_x8(unsigned char *ascii, wchar_t *uni, int len,
+static int uni16_to_x8(unsigned char *ascii, const wchar_t *uni, int len,
 		       int uni_xlate, struct nls_table *nls)
 {
-	wchar_t *ip, ec;
+	const wchar_t *ip;
+	wchar_t ec;
 	unsigned char *op, nc;
 	int charlen;
 	int k;
@@ -167,6 +167,16 @@ static int uni16_to_x8(unsigned char *ascii, wchar_t *uni, int len,
 	return (op - ascii);
 }
 
+static inline int fat_uni_to_x8(struct msdos_sb_info *sbi, const wchar_t *uni,
+				unsigned char *buf, int size)
+{
+	if (sbi->options.utf8)
+		return utf8_wcstombs(buf, uni, size);
+	else
+		return uni16_to_x8(buf, uni, size, sbi->options.unicode_xlate,
+				   sbi->nls_io);
+}
+
 static inline int
 fat_short2uni(struct nls_table *t, unsigned char *c, int clen, wchar_t *uni)
 {
@@ -227,6 +237,19 @@ fat_shortname2uni(struct nls_table *nls, unsigned char *buf, int buf_size,
 	return len;
 }
 
+static inline int fat_name_match(struct msdos_sb_info *sbi,
+				 const unsigned char *a, int a_len,
+				 const unsigned char *b, int b_len)
+{
+	if (a_len != b_len)
+		return 0;
+
+	if (sbi->options.name_check != 's')
+		return !nls_strnicmp(sbi->nls_io, a, b, a_len);
+	else
+		return !memcmp(a, b, a_len);
+}
+
 enum { PARSE_INVALID = 1, PARSE_NOT_LONGNAME, PARSE_EOF, };
 
 /**
@@ -302,6 +325,19 @@ parse_long:
 }
 
 /*
+ * Maximum buffer size of short name.
+ * [(MSDOS_NAME + '.') * max one char + nul]
+ * For msdos style, ['.' (hidden) + MSDOS_NAME + '.' + nul]
+ */
+#define FAT_MAX_SHORT_SIZE	((MSDOS_NAME + 1) * NLS_MAX_CHARSET_SIZE + 1)
+/*
+ * Maximum buffer size of unicode chars from slots.
+ * [(max longname slots * 13 (size in a slot) + nul) * sizeof(wchar_t)]
+ */
+#define FAT_MAX_UNI_CHARS	((MSDOS_SLOTS - 1) * 13 + 1)
+#define FAT_MAX_UNI_SIZE	(FAT_MAX_UNI_CHARS * sizeof(wchar_t))
+
+/*
  * Return values: negative -> error, 0 -> not found, positive -> found,
  * value is the total amount of slots, including the shortname entry.
  */
@@ -312,29 +348,20 @@ int fat_search_long(struct inode *inode, const unsigned char *name,
 	struct msdos_sb_info *sbi = MSDOS_SB(sb);
 	struct buffer_head *bh = NULL;
 	struct msdos_dir_entry *de;
-	struct nls_table *nls_io = sbi->nls_io;
 	struct nls_table *nls_disk = sbi->nls_disk;
-	wchar_t bufuname[14];
 	unsigned char nr_slots;
-	int xlate_len;
+	wchar_t bufuname[14];
 	wchar_t *unicode = NULL;
 	unsigned char work[MSDOS_NAME];
-	unsigned char *bufname = NULL;
-	int uni_xlate = sbi->options.unicode_xlate;
-	int utf8 = sbi->options.utf8;
-	int anycase = (sbi->options.name_check != 's');
+	unsigned char bufname[FAT_MAX_SHORT_SIZE];
 	unsigned short opt_shortname = sbi->options.shortname;
 	loff_t cpos = 0;
-	int chl, i, j, last_u, err;
-
-	bufname = __getname();
-	if (!bufname)
-		return -ENOMEM;
+	int chl, i, j, last_u, err, len;
 
 	err = -ENOENT;
-	while(1) {
+	while (1) {
 		if (fat_get_entry(inode, &cpos, &bh, &de) == -1)
-			goto EODir;
+			goto end_of_dir;
 parse_record:
 		nr_slots = 0;
 		if (de->name[0] == DELETED_FLAG)
@@ -353,7 +380,7 @@ parse_record:
 			else if (status == PARSE_NOT_LONGNAME)
 				goto parse_record;
 			else if (status == PARSE_EOF)
-				goto EODir;
+				goto end_of_dir;
 		}
 
 		memcpy(work, de->name, sizeof(de->name));
@@ -394,30 +421,24 @@ parse_record:
 		if (!last_u)
 			continue;
 
+		/* Compare shortname */
 		bufuname[last_u] = 0x0000;
-		xlate_len = utf8
-			?utf8_wcstombs(bufname, bufuname, PATH_MAX)
-			:uni16_to_x8(bufname, bufuname, PATH_MAX, uni_xlate, nls_io);
-		if (xlate_len == name_len)
-			if ((!anycase && !memcmp(name, bufname, xlate_len)) ||
-			    (anycase && !nls_strnicmp(nls_io, name, bufname,
-								xlate_len)))
-				goto Found;
+		len = fat_uni_to_x8(sbi, bufuname, bufname, sizeof(bufname));
+		if (fat_name_match(sbi, name, name_len, bufname, len))
+			goto found;
 
 		if (nr_slots) {
-			xlate_len = utf8
-				?utf8_wcstombs(bufname, unicode, PATH_MAX)
-				:uni16_to_x8(bufname, unicode, PATH_MAX, uni_xlate, nls_io);
-			if (xlate_len != name_len)
-				continue;
-			if ((!anycase && !memcmp(name, bufname, xlate_len)) ||
-			    (anycase && !nls_strnicmp(nls_io, name, bufname,
-								xlate_len)))
-				goto Found;
+			void *longname = unicode + FAT_MAX_UNI_CHARS;
+			int size = PATH_MAX - FAT_MAX_UNI_SIZE;
+
+			/* Compare longname */
+			len = fat_uni_to_x8(sbi, unicode, longname, size);
+			if (fat_name_match(sbi, name, name_len, longname, len))
+				goto found;
 		}
 	}
 
-Found:
+found:
 	nr_slots++;	/* include the de */
 	sinfo->slot_off = cpos - nr_slots * sizeof(*de);
 	sinfo->nr_slots = nr_slots;
@@ -425,9 +446,7 @@ Found:
 	sinfo->bh = bh;
 	sinfo->i_pos = fat_make_i_pos(sb, sinfo->bh, sinfo->de);
 	err = 0;
-EODir:
-	if (bufname)
-		__putname(bufname);
+end_of_dir:
 	if (unicode)
 		__putname(unicode);
 
@@ -453,23 +472,20 @@ static int __fat_readdir(struct inode *inode, struct file *filp, void *dirent,
 	struct msdos_sb_info *sbi = MSDOS_SB(sb);
 	struct buffer_head *bh;
 	struct msdos_dir_entry *de;
-	struct nls_table *nls_io = sbi->nls_io;
 	struct nls_table *nls_disk = sbi->nls_disk;
-	unsigned char long_slots;
-	const char *fill_name;
-	int fill_len;
+	unsigned char nr_slots;
 	wchar_t bufuname[14];
 	wchar_t *unicode = NULL;
-	unsigned char c, work[MSDOS_NAME], bufname[56], *ptname = bufname;
-	unsigned long lpos, dummy, *furrfu = &lpos;
-	int uni_xlate = sbi->options.unicode_xlate;
+	unsigned char c, work[MSDOS_NAME];
+	unsigned char bufname[FAT_MAX_SHORT_SIZE], *ptname = bufname;
+	unsigned short opt_shortname = sbi->options.shortname;
 	int isvfat = sbi->options.isvfat;
-	int utf8 = sbi->options.utf8;
 	int nocase = sbi->options.nocase;
-	unsigned short opt_shortname = sbi->options.shortname;
+	const char *fill_name = NULL;
 	unsigned long inum;
-	int chi, chl, i, i2, j, last, last_u, dotoffset = 0;
+	unsigned long lpos, dummy, *furrfu = &lpos;
 	loff_t cpos;
+	int chi, chl, i, i2, j, last, last_u, dotoffset = 0, fill_len = 0;
 	int ret = 0;
 
 	lock_super(sb);
@@ -489,43 +505,58 @@ static int __fat_readdir(struct inode *inode, struct file *filp, void *dirent,
 			cpos = 0;
 		}
 	}
-	if (cpos & (sizeof(struct msdos_dir_entry)-1)) {
+	if (cpos & (sizeof(struct msdos_dir_entry) - 1)) {
 		ret = -ENOENT;
 		goto out;
 	}
 
 	bh = NULL;
-GetNew:
+get_new:
 	if (fat_get_entry(inode, &cpos, &bh, &de) == -1)
-		goto EODir;
+		goto end_of_dir;
 parse_record:
-	long_slots = 0;
-	/* Check for long filename entry */
-	if (isvfat) {
+	nr_slots = 0;
+	/*
+	 * Check for long filename entry, but if short_only, we don't
+	 * need to parse long filename.
+	 */
+	if (isvfat && !short_only) {
 		if (de->name[0] == DELETED_FLAG)
-			goto RecEnd;
+			goto record_end;
 		if (de->attr != ATTR_EXT && (de->attr & ATTR_VOLUME))
-			goto RecEnd;
+			goto record_end;
 		if (de->attr != ATTR_EXT && IS_FREE(de->name))
-			goto RecEnd;
+			goto record_end;
 	} else {
 		if ((de->attr & ATTR_VOLUME) || IS_FREE(de->name))
-			goto RecEnd;
+			goto record_end;
 	}
 
 	if (isvfat && de->attr == ATTR_EXT) {
 		int status = fat_parse_long(inode, &cpos, &bh, &de,
-					    &unicode, &long_slots);
+					    &unicode, &nr_slots);
 		if (status < 0) {
 			filp->f_pos = cpos;
 			ret = status;
 			goto out;
 		} else if (status == PARSE_INVALID)
-			goto RecEnd;
+			goto record_end;
 		else if (status == PARSE_NOT_LONGNAME)
 			goto parse_record;
 		else if (status == PARSE_EOF)
-			goto EODir;
+			goto end_of_dir;
+
+		if (nr_slots) {
+			void *longname = unicode + FAT_MAX_UNI_CHARS;
+			int size = PATH_MAX - FAT_MAX_UNI_SIZE;
+			int len = fat_uni_to_x8(sbi, unicode, longname, size);
+
+			fill_name = longname;
+			fill_len = len;
+			/* !both && !short_only, so we don't need shortname. */
+			if (!both)
+				goto start_filldir;
+		}
 	}
 
 	if (sbi->options.dotsOK) {
@@ -587,12 +618,32 @@ parse_record:
 		}
 	}
 	if (!last)
-		goto RecEnd;
+		goto record_end;
 
 	i = last + dotoffset;
 	j = last_u;
 
-	lpos = cpos - (long_slots+1)*sizeof(struct msdos_dir_entry);
+	if (isvfat) {
+		bufuname[j] = 0x0000;
+		i = fat_uni_to_x8(sbi, bufuname, bufname, sizeof(bufname));
+	}
+	if (nr_slots) {
+		/* hack for fat_ioctl_filldir() */
+		struct fat_ioctl_filldir_callback *p = dirent;
+
+		p->longname = fill_name;
+		p->long_len = fill_len;
+		p->shortname = bufname;
+		p->short_len = i;
+		fill_name = NULL;
+		fill_len = 0;
+	} else {
+		fill_name = bufname;
+		fill_len = i;
+	}
+
+start_filldir:
+	lpos = cpos - (nr_slots + 1) * sizeof(struct msdos_dir_entry);
 	if (!memcmp(de->name, MSDOS_DOT, MSDOS_NAME))
 		inum = inode->i_ino;
 	else if (!memcmp(de->name, MSDOS_DOTDOT, MSDOS_NAME)) {
@@ -607,49 +658,17 @@ parse_record:
 			inum = iunique(sb, MSDOS_ROOT_INO);
 	}
 
-	if (isvfat) {
-		bufuname[j] = 0x0000;
-		i = utf8 ? utf8_wcstombs(bufname, bufuname, sizeof(bufname))
-			 : uni16_to_x8(bufname, bufuname, sizeof(bufname), uni_xlate, nls_io);
-	}
-
-	fill_name = bufname;
-	fill_len = i;
-	if (!short_only && long_slots) {
-		/* convert the unicode long name. 261 is maximum size
-		 * of unicode buffer. (13 * slots + nul) */
-		void *longname = unicode + 261;
-		int buf_size = PATH_MAX - (261 * sizeof(unicode[0]));
-		int long_len = utf8
-			? utf8_wcstombs(longname, unicode, buf_size)
-			: uni16_to_x8(longname, unicode, buf_size, uni_xlate, nls_io);
-
-		if (!both) {
-			fill_name = longname;
-			fill_len = long_len;
-		} else {
-			/* hack for fat_ioctl_filldir() */
-			struct fat_ioctl_filldir_callback *p = dirent;
-
-			p->longname = longname;
-			p->long_len = long_len;
-			p->shortname = bufname;
-			p->short_len = i;
-			fill_name = NULL;
-			fill_len = 0;
-		}
-	}
 	if (filldir(dirent, fill_name, fill_len, *furrfu, inum,
 		    (de->attr & ATTR_DIR) ? DT_DIR : DT_REG) < 0)
-		goto FillFailed;
+		goto fill_failed;
 
-RecEnd:
+record_end:
 	furrfu = &lpos;
 	filp->f_pos = cpos;
-	goto GetNew;
-EODir:
+	goto get_new;
+end_of_dir:
 	filp->f_pos = cpos;
-FillFailed:
+fill_failed:
 	brelse(bh);
 	if (unicode)
 		__putname(unicode);
@@ -715,7 +734,7 @@ efault:									   \
 	return -EFAULT;							   \
 }
 
-FAT_IOCTL_FILLDIR_FUNC(fat_ioctl_filldir, dirent)
+FAT_IOCTL_FILLDIR_FUNC(fat_ioctl_filldir, __fat_dirent)
 
 static int fat_ioctl_readdir(struct inode *inode, struct file *filp,
 			     void __user *dirent, filldir_t filldir,
@@ -741,7 +760,7 @@ static int fat_ioctl_readdir(struct inode *inode, struct file *filp,
 static int fat_dir_ioctl(struct inode *inode, struct file *filp,
 			 unsigned int cmd, unsigned long arg)
 {
-	struct dirent __user *d1 = (struct dirent __user *)arg;
+	struct __fat_dirent __user *d1 = (struct __fat_dirent __user *)arg;
 	int short_only, both;
 
 	switch (cmd) {
@@ -757,7 +776,7 @@ static int fat_dir_ioctl(struct inode *inode, struct file *filp,
 		return fat_generic_ioctl(inode, filp, cmd, arg);
 	}
 
-	if (!access_ok(VERIFY_WRITE, d1, sizeof(struct dirent[2])))
+	if (!access_ok(VERIFY_WRITE, d1, sizeof(struct __fat_dirent[2])))
 		return -EFAULT;
 	/*
 	 * Yes, we don't need this put_user() absolutely. However old
@@ -1082,7 +1101,7 @@ int fat_alloc_new_dir(struct inode *dir, struct timespec *ts)
 		goto error_free;
 	}
 
-	fat_date_unix2dos(ts->tv_sec, &time, &date);
+	fat_date_unix2dos(ts->tv_sec, &time, &date, sbi->options.tz_utc);
 
 	de = (struct msdos_dir_entry *)bhs[0]->b_data;
 	/* filling the new directory slots ("." and ".." entries) */
diff --git a/fs/fat/file.c b/fs/fat/file.c
index c672df4036e9..ddde37025ca6 100644
--- a/fs/fat/file.c
+++ b/fs/fat/file.c
@@ -15,6 +15,8 @@
 #include <linux/writeback.h>
 #include <linux/backing-dev.h>
 #include <linux/blkdev.h>
+#include <linux/fsnotify.h>
+#include <linux/security.h>
 
 int fat_generic_ioctl(struct inode *inode, struct file *filp,
 		      unsigned int cmd, unsigned long arg)
@@ -64,6 +66,7 @@ int fat_generic_ioctl(struct inode *inode, struct file *filp,
 
 		/* Equivalent to a chmod() */
 		ia.ia_valid = ATTR_MODE | ATTR_CTIME;
+		ia.ia_ctime = current_fs_time(inode->i_sb);
 		if (is_dir) {
 			ia.ia_mode = MSDOS_MKMODE(attr,
 				S_IRWXUGO & ~sbi->options.fs_dmask)
@@ -90,11 +93,21 @@ int fat_generic_ioctl(struct inode *inode, struct file *filp,
 			}
 		}
 
+		/*
+		 * The security check is questionable...  We single
+		 * out the RO attribute for checking by the security
+		 * module, just because it maps to a file mode.
+		 */
+		err = security_inode_setattr(filp->f_path.dentry, &ia);
+		if (err)
+			goto up;
+
 		/* This MUST be done before doing anything irreversible... */
-		err = notify_change(filp->f_path.dentry, &ia);
+		err = fat_setattr(filp->f_path.dentry, &ia);
 		if (err)
 			goto up;
 
+		fsnotify_change(filp->f_path.dentry, ia.ia_valid);
 		if (sbi->options.sys_immutable) {
 			if (attr & ATTR_SYS)
 				inode->i_flags |= S_IMMUTABLE;
@@ -300,6 +313,8 @@ static int fat_allow_set_time(struct msdos_sb_info *sbi, struct inode *inode)
 	return 0;
 }
 
+#define TIMES_SET_FLAGS	(ATTR_MTIME_SET | ATTR_ATIME_SET | ATTR_TIMES_SET)
+
 int fat_setattr(struct dentry *dentry, struct iattr *attr)
 {
 	struct msdos_sb_info *sbi = MSDOS_SB(dentry->d_sb);
@@ -323,9 +338,9 @@ int fat_setattr(struct dentry *dentry, struct iattr *attr)
 
 	/* Check for setting the inode time. */
 	ia_valid = attr->ia_valid;
-	if (ia_valid & (ATTR_MTIME_SET | ATTR_ATIME_SET)) {
+	if (ia_valid & TIMES_SET_FLAGS) {
 		if (fat_allow_set_time(sbi, inode))
-			attr->ia_valid &= ~(ATTR_MTIME_SET | ATTR_ATIME_SET);
+			attr->ia_valid &= ~TIMES_SET_FLAGS;
 	}
 
 	error = inode_change_ok(inode, attr);
diff --git a/fs/fat/inode.c b/fs/fat/inode.c
index 46a4508ffd2e..80ff3381fa21 100644
--- a/fs/fat/inode.c
+++ b/fs/fat/inode.c
@@ -382,17 +382,20 @@ static int fat_fill_inode(struct inode *inode, struct msdos_dir_entry *de)
 	inode->i_blocks = ((inode->i_size + (sbi->cluster_size - 1))
 			   & ~((loff_t)sbi->cluster_size - 1)) >> 9;
 	inode->i_mtime.tv_sec =
-		date_dos2unix(le16_to_cpu(de->time), le16_to_cpu(de->date));
+		date_dos2unix(le16_to_cpu(de->time), le16_to_cpu(de->date),
+			      sbi->options.tz_utc);
 	inode->i_mtime.tv_nsec = 0;
 	if (sbi->options.isvfat) {
 		int secs = de->ctime_cs / 100;
 		int csecs = de->ctime_cs % 100;
 		inode->i_ctime.tv_sec  =
 			date_dos2unix(le16_to_cpu(de->ctime),
-				      le16_to_cpu(de->cdate)) + secs;
+				      le16_to_cpu(de->cdate),
+				      sbi->options.tz_utc) + secs;
 		inode->i_ctime.tv_nsec = csecs * 10000000;
 		inode->i_atime.tv_sec =
-			date_dos2unix(0, le16_to_cpu(de->adate));
+			date_dos2unix(0, le16_to_cpu(de->adate),
+				      sbi->options.tz_utc);
 		inode->i_atime.tv_nsec = 0;
 	} else
 		inode->i_ctime = inode->i_atime = inode->i_mtime;
@@ -495,7 +498,7 @@ static void fat_destroy_inode(struct inode *inode)
 	kmem_cache_free(fat_inode_cachep, MSDOS_I(inode));
 }
 
-static void init_once(struct kmem_cache *cachep, void *foo)
+static void init_once(void *foo)
 {
 	struct msdos_inode_info *ei = (struct msdos_inode_info *)foo;
 
@@ -559,26 +562,23 @@ static int fat_write_inode(struct inode *inode, int wait)
 	struct buffer_head *bh;
 	struct msdos_dir_entry *raw_entry;
 	loff_t i_pos;
-	int err = 0;
+	int err;
 
 retry:
 	i_pos = MSDOS_I(inode)->i_pos;
 	if (inode->i_ino == MSDOS_ROOT_INO || !i_pos)
 		return 0;
 
-	lock_super(sb);
 	bh = sb_bread(sb, i_pos >> sbi->dir_per_block_bits);
 	if (!bh) {
 		printk(KERN_ERR "FAT: unable to read inode block "
 		       "for updating (i_pos %lld)\n", i_pos);
-		err = -EIO;
-		goto out;
+		return -EIO;
 	}
 	spin_lock(&sbi->inode_hash_lock);
 	if (i_pos != MSDOS_I(inode)->i_pos) {
 		spin_unlock(&sbi->inode_hash_lock);
 		brelse(bh);
-		unlock_super(sb);
 		goto retry;
 	}
 
@@ -591,21 +591,23 @@ retry:
 	raw_entry->attr = fat_attr(inode);
 	raw_entry->start = cpu_to_le16(MSDOS_I(inode)->i_logstart);
 	raw_entry->starthi = cpu_to_le16(MSDOS_I(inode)->i_logstart >> 16);
-	fat_date_unix2dos(inode->i_mtime.tv_sec, &raw_entry->time, &raw_entry->date);
+	fat_date_unix2dos(inode->i_mtime.tv_sec, &raw_entry->time,
+			  &raw_entry->date, sbi->options.tz_utc);
 	if (sbi->options.isvfat) {
 		__le16 atime;
-		fat_date_unix2dos(inode->i_ctime.tv_sec,&raw_entry->ctime,&raw_entry->cdate);
-		fat_date_unix2dos(inode->i_atime.tv_sec,&atime,&raw_entry->adate);
+		fat_date_unix2dos(inode->i_ctime.tv_sec, &raw_entry->ctime,
+				  &raw_entry->cdate, sbi->options.tz_utc);
+		fat_date_unix2dos(inode->i_atime.tv_sec, &atime,
+				  &raw_entry->adate, sbi->options.tz_utc);
 		raw_entry->ctime_cs = (inode->i_ctime.tv_sec & 1) * 100 +
 			inode->i_ctime.tv_nsec / 10000000;
 	}
 	spin_unlock(&sbi->inode_hash_lock);
 	mark_buffer_dirty(bh);
+	err = 0;
 	if (wait)
 		err = sync_dirty_buffer(bh);
 	brelse(bh);
-out:
-	unlock_super(sb);
 	return err;
 }
 
@@ -836,6 +838,8 @@ static int fat_show_options(struct seq_file *m, struct vfsmount *mnt)
 	}
 	if (sbi->options.flush)
 		seq_puts(m, ",flush");
+	if (opts->tz_utc)
+		seq_puts(m, ",tz=UTC");
 
 	return 0;
 }
@@ -848,7 +852,7 @@ enum {
 	Opt_charset, Opt_shortname_lower, Opt_shortname_win95,
 	Opt_shortname_winnt, Opt_shortname_mixed, Opt_utf8_no, Opt_utf8_yes,
 	Opt_uni_xl_no, Opt_uni_xl_yes, Opt_nonumtail_no, Opt_nonumtail_yes,
-	Opt_obsolate, Opt_flush, Opt_err,
+	Opt_obsolate, Opt_flush, Opt_tz_utc, Opt_err,
 };
 
 static match_table_t fat_tokens = {
@@ -883,6 +887,7 @@ static match_table_t fat_tokens = {
 	{Opt_obsolate, "cvf_options=%100s"},
 	{Opt_obsolate, "posix"},
 	{Opt_flush, "flush"},
+	{Opt_tz_utc, "tz=UTC"},
 	{Opt_err, NULL},
 };
 static match_table_t msdos_tokens = {
@@ -947,10 +952,11 @@ static int parse_options(char *options, int is_vfat, int silent, int *debug,
 	opts->utf8 = opts->unicode_xlate = 0;
 	opts->numtail = 1;
 	opts->usefree = opts->nocase = 0;
+	opts->tz_utc = 0;
 	*debug = 0;
 
 	if (!options)
-		return 0;
+		goto out;
 
 	while ((p = strsep(&options, ",")) != NULL) {
 		int token;
@@ -1036,6 +1042,9 @@ static int parse_options(char *options, int is_vfat, int silent, int *debug,
 		case Opt_flush:
 			opts->flush = 1;
 			break;
+		case Opt_tz_utc:
+			opts->tz_utc = 1;
+			break;
 
 		/* msdos specific */
 		case Opt_dots:
@@ -1104,10 +1113,13 @@ static int parse_options(char *options, int is_vfat, int silent, int *debug,
 			return -EINVAL;
 		}
 	}
+
+out:
 	/* UTF-8 doesn't provide FAT semantics */
 	if (!strcmp(opts->iocharset, "utf8")) {
 		printk(KERN_ERR "FAT: utf8 is not a recommended IO charset"
-		       " for FAT filesystems, filesystem will be case sensitive!\n");
+		       " for FAT filesystems, filesystem will be "
+		       "case sensitive!\n");
 	}
 
 	/* If user doesn't specify allow_utime, it's initialized from dmask. */
diff --git a/fs/fat/misc.c b/fs/fat/misc.c
index 61f23511eacf..79fb98ad36d4 100644
--- a/fs/fat/misc.c
+++ b/fs/fat/misc.c
@@ -142,7 +142,7 @@ static int day_n[] = {
 };
 
 /* Convert a MS-DOS time/date pair to a UNIX date (seconds since 1 1 70). */
-int date_dos2unix(unsigned short time, unsigned short date)
+int date_dos2unix(unsigned short time, unsigned short date, int tz_utc)
 {
 	int month, year, secs;
 
@@ -156,16 +156,18 @@ int date_dos2unix(unsigned short time, unsigned short date)
 	    ((date & 31)-1+day_n[month]+(year/4)+year*365-((year & 3) == 0 &&
 	    month < 2 ? 1 : 0)+3653);
 			/* days since 1.1.70 plus 80's leap day */
-	secs += sys_tz.tz_minuteswest*60;
+	if (!tz_utc)
+		secs += sys_tz.tz_minuteswest*60;
 	return secs;
 }
 
 /* Convert linear UNIX date to a MS-DOS time/date pair. */
-void fat_date_unix2dos(int unix_date, __le16 *time, __le16 *date)
+void fat_date_unix2dos(int unix_date, __le16 *time, __le16 *date, int tz_utc)
 {
 	int day, year, nl_day, month;
 
-	unix_date -= sys_tz.tz_minuteswest*60;
+	if (!tz_utc)
+		unix_date -= sys_tz.tz_minuteswest*60;
 
 	/* Jan 1 GMT 00:00:00 1980. But what about another time zone? */
 	if (unix_date < 315532800)
diff --git a/fs/fcntl.c b/fs/fcntl.c
index 9679fcbdeaa0..ac4f7db9f134 100644
--- a/fs/fcntl.c
+++ b/fs/fcntl.c
@@ -49,82 +49,6 @@ static int get_close_on_exec(unsigned int fd)
 	return res;
 }
 
-/*
- * locate_fd finds a free file descriptor in the open_fds fdset,
- * expanding the fd arrays if necessary.  Must be called with the
- * file_lock held for write.
- */
-
-static int locate_fd(unsigned int orig_start, int cloexec)
-{
-	struct files_struct *files = current->files;
-	unsigned int newfd;
-	unsigned int start;
-	int error;
-	struct fdtable *fdt;
-
-	spin_lock(&files->file_lock);
-
-	error = -EINVAL;
-	if (orig_start >= current->signal->rlim[RLIMIT_NOFILE].rlim_cur)
-		goto out;
-
-repeat:
-	fdt = files_fdtable(files);
-	/*
-	 * Someone might have closed fd's in the range
-	 * orig_start..fdt->next_fd
-	 */
-	start = orig_start;
-	if (start < files->next_fd)
-		start = files->next_fd;
-
-	newfd = start;
-	if (start < fdt->max_fds)
-		newfd = find_next_zero_bit(fdt->open_fds->fds_bits,
-					   fdt->max_fds, start);
-	
-	error = -EMFILE;
-	if (newfd >= current->signal->rlim[RLIMIT_NOFILE].rlim_cur)
-		goto out;
-
-	error = expand_files(files, newfd);
-	if (error < 0)
-		goto out;
-
-	/*
-	 * If we needed to expand the fs array we
-	 * might have blocked - try again.
-	 */
-	if (error)
-		goto repeat;
-
-	if (start <= files->next_fd)
-		files->next_fd = newfd + 1;
-
-	FD_SET(newfd, fdt->open_fds);
-	if (cloexec)
-		FD_SET(newfd, fdt->close_on_exec);
-	else
-		FD_CLR(newfd, fdt->close_on_exec);
-	error = newfd;
-
-out:
-	spin_unlock(&files->file_lock);
-	return error;
-}
-
-static int dupfd(struct file *file, unsigned int start, int cloexec)
-{
-	int fd = locate_fd(start, cloexec);
-	if (fd >= 0)
-		fd_install(fd, file);
-	else
-		fput(file);
-
-	return fd;
-}
-
 asmlinkage long sys_dup3(unsigned int oldfd, unsigned int newfd, int flags)
 {
 	int err = -EBADF;
@@ -135,35 +59,39 @@ asmlinkage long sys_dup3(unsigned int oldfd, unsigned int newfd, int flags)
 	if ((flags & ~O_CLOEXEC) != 0)
 		return -EINVAL;
 
-	spin_lock(&files->file_lock);
-	if (!(file = fcheck(oldfd)))
-		goto out_unlock;
-	err = newfd;
-	if (newfd == oldfd)
-		goto out_unlock;
-	err = -EBADF;
-	if (newfd >= current->signal->rlim[RLIMIT_NOFILE].rlim_cur)
-		goto out_unlock;
-	get_file(file);			/* We are now finished with oldfd */
+	if (unlikely(oldfd == newfd))
+		return -EINVAL;
 
+	spin_lock(&files->file_lock);
 	err = expand_files(files, newfd);
-	if (err < 0)
-		goto out_fput;
-
-	/* To avoid races with open() and dup(), we will mark the fd as
-	 * in-use in the open-file bitmap throughout the entire dup2()
-	 * process.  This is quite safe: do_close() uses the fd array
-	 * entry, not the bitmap, to decide what work needs to be
-	 * done.  --sct */
-	/* Doesn't work. open() might be there first. --AV */
-
-	/* Yes. It's a race. In user space. Nothing sane to do */
+	file = fcheck(oldfd);
+	if (unlikely(!file))
+		goto Ebadf;
+	if (unlikely(err < 0)) {
+		if (err == -EMFILE)
+			goto Ebadf;
+		goto out_unlock;
+	}
+	/*
+	 * We need to detect attempts to do dup2() over allocated but still
+	 * not finished descriptor.  NB: OpenBSD avoids that at the price of
+	 * extra work in their equivalent of fget() - they insert struct
+	 * file immediately after grabbing descriptor, mark it larval if
+	 * more work (e.g. actual opening) is needed and make sure that
+	 * fget() treats larval files as absent.  Potentially interesting,
+	 * but while extra work in fget() is trivial, locking implications
+	 * and amount of surgery on open()-related paths in VFS are not.
+	 * FreeBSD fails with -EBADF in the same situation, NetBSD "solution"
+	 * deadlocks in rather amusing ways, AFAICS.  All of that is out of
+	 * scope of POSIX or SUS, since neither considers shared descriptor
+	 * tables and this condition does not arise without those.
+	 */
 	err = -EBUSY;
 	fdt = files_fdtable(files);
 	tofree = fdt->fd[newfd];
 	if (!tofree && FD_ISSET(newfd, fdt->open_fds))
-		goto out_fput;
-
+		goto out_unlock;
+	get_file(file);
 	rcu_assign_pointer(fdt->fd[newfd], file);
 	FD_SET(newfd, fdt->open_fds);
 	if (flags & O_CLOEXEC)
@@ -174,31 +102,41 @@ asmlinkage long sys_dup3(unsigned int oldfd, unsigned int newfd, int flags)
 
 	if (tofree)
 		filp_close(tofree, files);
-	err = newfd;
-out:
-	return err;
-out_unlock:
-	spin_unlock(&files->file_lock);
-	goto out;
 
-out_fput:
+	return newfd;
+
+Ebadf:
+	err = -EBADF;
+out_unlock:
 	spin_unlock(&files->file_lock);
-	fput(file);
-	goto out;
+	return err;
 }
 
 asmlinkage long sys_dup2(unsigned int oldfd, unsigned int newfd)
 {
+	if (unlikely(newfd == oldfd)) { /* corner case */
+		struct files_struct *files = current->files;
+		rcu_read_lock();
+		if (!fcheck_files(files, oldfd))
+			oldfd = -EBADF;
+		rcu_read_unlock();
+		return oldfd;
+	}
 	return sys_dup3(oldfd, newfd, 0);
 }
 
 asmlinkage long sys_dup(unsigned int fildes)
 {
 	int ret = -EBADF;
-	struct file * file = fget(fildes);
-
-	if (file)
-		ret = dupfd(file, 0, 0);
+	struct file *file = fget(fildes);
+
+	if (file) {
+		ret = get_unused_fd();
+		if (ret >= 0)
+			fd_install(ret, file);
+		else
+			fput(file);
+	}
 	return ret;
 }
 
@@ -321,8 +259,13 @@ static long do_fcntl(int fd, unsigned int cmd, unsigned long arg,
 	switch (cmd) {
 	case F_DUPFD:
 	case F_DUPFD_CLOEXEC:
-		get_file(filp);
-		err = dupfd(filp, arg, cmd == F_DUPFD_CLOEXEC);
+		if (arg >= current->signal->rlim[RLIMIT_NOFILE].rlim_cur)
+			break;
+		err = alloc_fd(arg, cmd == F_DUPFD_CLOEXEC ? O_CLOEXEC : 0);
+		if (err >= 0) {
+			get_file(filp);
+			fd_install(err, filp);
+		}
 		break;
 	case F_GETFD:
 		err = get_close_on_exec(fd) ? FD_CLOEXEC : 0;
diff --git a/fs/fifo.c b/fs/fifo.c
index 9785e36f81e7..987bf9411495 100644
--- a/fs/fifo.c
+++ b/fs/fifo.c
@@ -57,7 +57,7 @@ static int fifo_open(struct inode *inode, struct file *filp)
 	 *  POSIX.1 says that O_NONBLOCK means return with the FIFO
 	 *  opened, even when there is no process writing the FIFO.
 	 */
-		filp->f_op = &read_fifo_fops;
+		filp->f_op = &read_pipefifo_fops;
 		pipe->r_counter++;
 		if (pipe->readers++ == 0)
 			wake_up_partner(inode);
@@ -86,7 +86,7 @@ static int fifo_open(struct inode *inode, struct file *filp)
 		if ((filp->f_flags & O_NONBLOCK) && !pipe->readers)
 			goto err;
 
-		filp->f_op = &write_fifo_fops;
+		filp->f_op = &write_pipefifo_fops;
 		pipe->w_counter++;
 		if (!pipe->writers++)
 			wake_up_partner(inode);
@@ -105,7 +105,7 @@ static int fifo_open(struct inode *inode, struct file *filp)
 	 *  This implementation will NEVER block on a O_RDWR open, since
 	 *  the process can at least talk to itself.
 	 */
-		filp->f_op = &rdwr_fifo_fops;
+		filp->f_op = &rdwr_pipefifo_fops;
 
 		pipe->readers++;
 		pipe->writers++;
@@ -151,5 +151,5 @@ err_nocleanup:
  * depending on the access mode of the file...
  */
 const struct file_operations def_fifo_fops = {
-	.open		= fifo_open,	/* will set read or write pipe_fops */
+	.open		= fifo_open,	/* will set read_ or write_pipefifo_fops */
 };
diff --git a/fs/file.c b/fs/file.c
index 7b3887e054d0..f313314f996f 100644
--- a/fs/file.c
+++ b/fs/file.c
@@ -6,6 +6,7 @@
  *  Manage the dynamic fd arrays in the process files_struct.
  */
 
+#include <linux/module.h>
 #include <linux/fs.h>
 #include <linux/mm.h>
 #include <linux/time.h>
@@ -250,9 +251,18 @@ int expand_files(struct files_struct *files, int nr)
 	struct fdtable *fdt;
 
 	fdt = files_fdtable(files);
+
+	/*
+	 * N.B. For clone tasks sharing a files structure, this test
+	 * will limit the total number of files that can be opened.
+	 */
+	if (nr >= current->signal->rlim[RLIMIT_NOFILE].rlim_cur)
+		return -EMFILE;
+
 	/* Do we need to expand? */
 	if (nr < fdt->max_fds)
 		return 0;
+
 	/* Can we expand? */
 	if (nr >= sysctl_nr_open)
 		return -EMFILE;
@@ -423,3 +433,63 @@ struct files_struct init_files = {
 	},
 	.file_lock	= __SPIN_LOCK_UNLOCKED(init_task.file_lock),
 };
+
+/*
+ * allocate a file descriptor, mark it busy.
+ */
+int alloc_fd(unsigned start, unsigned flags)
+{
+	struct files_struct *files = current->files;
+	unsigned int fd;
+	int error;
+	struct fdtable *fdt;
+
+	spin_lock(&files->file_lock);
+repeat:
+	fdt = files_fdtable(files);
+	fd = start;
+	if (fd < files->next_fd)
+		fd = files->next_fd;
+
+	if (fd < fdt->max_fds)
+		fd = find_next_zero_bit(fdt->open_fds->fds_bits,
+					   fdt->max_fds, fd);
+
+	error = expand_files(files, fd);
+	if (error < 0)
+		goto out;
+
+	/*
+	 * If we needed to expand the fs array we
+	 * might have blocked - try again.
+	 */
+	if (error)
+		goto repeat;
+
+	if (start <= files->next_fd)
+		files->next_fd = fd + 1;
+
+	FD_SET(fd, fdt->open_fds);
+	if (flags & O_CLOEXEC)
+		FD_SET(fd, fdt->close_on_exec);
+	else
+		FD_CLR(fd, fdt->close_on_exec);
+	error = fd;
+#if 1
+	/* Sanity check */
+	if (rcu_dereference(fdt->fd[fd]) != NULL) {
+		printk(KERN_WARNING "alloc_fd: slot %d not NULL!\n", fd);
+		rcu_assign_pointer(fdt->fd[fd], NULL);
+	}
+#endif
+
+out:
+	spin_unlock(&files->file_lock);
+	return error;
+}
+
+int get_unused_fd(void)
+{
+	return alloc_fd(0, 0);
+}
+EXPORT_SYMBOL(get_unused_fd);
diff --git a/fs/file_table.c b/fs/file_table.c
index 83084225b4c3..f45a4493f9e7 100644
--- a/fs/file_table.c
+++ b/fs/file_table.c
@@ -120,7 +120,7 @@ struct file *get_empty_filp(void)
 
 	tsk = current;
 	INIT_LIST_HEAD(&f->f_u.fu_list);
-	atomic_set(&f->f_count, 1);
+	atomic_long_set(&f->f_count, 1);
 	rwlock_init(&f->f_owner.lock);
 	f->f_uid = tsk->fsuid;
 	f->f_gid = tsk->fsgid;
@@ -219,7 +219,7 @@ EXPORT_SYMBOL(init_file);
 
 void fput(struct file *file)
 {
-	if (atomic_dec_and_test(&file->f_count))
+	if (atomic_long_dec_and_test(&file->f_count))
 		__fput(file);
 }
 
@@ -294,7 +294,7 @@ struct file *fget(unsigned int fd)
 	rcu_read_lock();
 	file = fcheck_files(files, fd);
 	if (file) {
-		if (!atomic_inc_not_zero(&file->f_count)) {
+		if (!atomic_long_inc_not_zero(&file->f_count)) {
 			/* File object ref couldn't be taken */
 			rcu_read_unlock();
 			return NULL;
@@ -326,7 +326,7 @@ struct file *fget_light(unsigned int fd, int *fput_needed)
 		rcu_read_lock();
 		file = fcheck_files(files, fd);
 		if (file) {
-			if (atomic_inc_not_zero(&file->f_count))
+			if (atomic_long_inc_not_zero(&file->f_count))
 				*fput_needed = 1;
 			else
 				/* Didn't get the reference, someone's freed */
@@ -341,7 +341,7 @@ struct file *fget_light(unsigned int fd, int *fput_needed)
 
 void put_filp(struct file *file)
 {
-	if (atomic_dec_and_test(&file->f_count)) {
+	if (atomic_long_dec_and_test(&file->f_count)) {
 		security_file_free(file);
 		file_kill(file);
 		file_free(file);
diff --git a/fs/fuse/dir.c b/fs/fuse/dir.c
index 2060bf06b906..fd03330cadeb 100644
--- a/fs/fuse/dir.c
+++ b/fs/fuse/dir.c
@@ -97,7 +97,7 @@ void fuse_invalidate_attr(struct inode *inode)
  * timeout is unknown (unlink, rmdir, rename and in some cases
  * lookup)
  */
-static void fuse_invalidate_entry_cache(struct dentry *entry)
+void fuse_invalidate_entry_cache(struct dentry *entry)
 {
 	fuse_dentry_settime(entry, 0);
 }
@@ -112,18 +112,16 @@ static void fuse_invalidate_entry(struct dentry *entry)
 	fuse_invalidate_entry_cache(entry);
 }
 
-static void fuse_lookup_init(struct fuse_req *req, struct inode *dir,
-			     struct dentry *entry,
+static void fuse_lookup_init(struct fuse_conn *fc, struct fuse_req *req,
+			     u64 nodeid, struct qstr *name,
 			     struct fuse_entry_out *outarg)
 {
-	struct fuse_conn *fc = get_fuse_conn(dir);
-
 	memset(outarg, 0, sizeof(struct fuse_entry_out));
 	req->in.h.opcode = FUSE_LOOKUP;
-	req->in.h.nodeid = get_node_id(dir);
+	req->in.h.nodeid = nodeid;
 	req->in.numargs = 1;
-	req->in.args[0].size = entry->d_name.len + 1;
-	req->in.args[0].value = entry->d_name.name;
+	req->in.args[0].size = name->len + 1;
+	req->in.args[0].value = name->name;
 	req->out.numargs = 1;
 	if (fc->minor < 9)
 		req->out.args[0].size = FUSE_COMPAT_ENTRY_OUT_SIZE;
@@ -189,7 +187,8 @@ static int fuse_dentry_revalidate(struct dentry *entry, struct nameidata *nd)
 		attr_version = fuse_get_attr_version(fc);
 
 		parent = dget_parent(entry);
-		fuse_lookup_init(req, parent->d_inode, entry, &outarg);
+		fuse_lookup_init(fc, req, get_node_id(parent->d_inode),
+				 &entry->d_name, &outarg);
 		request_send(fc, req);
 		dput(parent);
 		err = req->out.h.error;
@@ -225,7 +224,7 @@ static int invalid_nodeid(u64 nodeid)
 	return !nodeid || nodeid == FUSE_ROOT_ID;
 }
 
-static struct dentry_operations fuse_dentry_operations = {
+struct dentry_operations fuse_dentry_operations = {
 	.d_revalidate	= fuse_dentry_revalidate,
 };
 
@@ -239,85 +238,127 @@ int fuse_valid_type(int m)
  * Add a directory inode to a dentry, ensuring that no other dentry
  * refers to this inode.  Called with fc->inst_mutex.
  */
-static int fuse_d_add_directory(struct dentry *entry, struct inode *inode)
+static struct dentry *fuse_d_add_directory(struct dentry *entry,
+					   struct inode *inode)
 {
 	struct dentry *alias = d_find_alias(inode);
-	if (alias) {
+	if (alias && !(alias->d_flags & DCACHE_DISCONNECTED)) {
 		/* This tries to shrink the subtree below alias */
 		fuse_invalidate_entry(alias);
 		dput(alias);
 		if (!list_empty(&inode->i_dentry))
-			return -EBUSY;
+			return ERR_PTR(-EBUSY);
+	} else {
+		dput(alias);
 	}
-	d_add(entry, inode);
-	return 0;
+	return d_splice_alias(inode, entry);
 }
 
-static struct dentry *fuse_lookup(struct inode *dir, struct dentry *entry,
-				  struct nameidata *nd)
+int fuse_lookup_name(struct super_block *sb, u64 nodeid, struct qstr *name,
+		     struct fuse_entry_out *outarg, struct inode **inode)
 {
-	int err;
-	struct fuse_entry_out outarg;
-	struct inode *inode = NULL;
-	struct fuse_conn *fc = get_fuse_conn(dir);
+	struct fuse_conn *fc = get_fuse_conn_super(sb);
 	struct fuse_req *req;
 	struct fuse_req *forget_req;
 	u64 attr_version;
+	int err;
 
-	if (entry->d_name.len > FUSE_NAME_MAX)
-		return ERR_PTR(-ENAMETOOLONG);
+	*inode = NULL;
+	err = -ENAMETOOLONG;
+	if (name->len > FUSE_NAME_MAX)
+		goto out;
 
 	req = fuse_get_req(fc);
+	err = PTR_ERR(req);
 	if (IS_ERR(req))
-		return ERR_CAST(req);
+		goto out;
 
 	forget_req = fuse_get_req(fc);
+	err = PTR_ERR(forget_req);
 	if (IS_ERR(forget_req)) {
 		fuse_put_request(fc, req);
-		return ERR_CAST(forget_req);
+		goto out;
 	}
 
 	attr_version = fuse_get_attr_version(fc);
 
-	fuse_lookup_init(req, dir, entry, &outarg);
+	fuse_lookup_init(fc, req, nodeid, name, outarg);
 	request_send(fc, req);
 	err = req->out.h.error;
 	fuse_put_request(fc, req);
 	/* Zero nodeid is same as -ENOENT, but with valid timeout */
-	if (!err && outarg.nodeid &&
-	    (invalid_nodeid(outarg.nodeid) ||
-	     !fuse_valid_type(outarg.attr.mode)))
-		err = -EIO;
-	if (!err && outarg.nodeid) {
-		inode = fuse_iget(dir->i_sb, outarg.nodeid, outarg.generation,
-				  &outarg.attr, entry_attr_timeout(&outarg),
-				  attr_version);
-		if (!inode) {
-			fuse_send_forget(fc, forget_req, outarg.nodeid, 1);
-			return ERR_PTR(-ENOMEM);
-		}
+	if (err || !outarg->nodeid)
+		goto out_put_forget;
+
+	err = -EIO;
+	if (!outarg->nodeid)
+		goto out_put_forget;
+	if (!fuse_valid_type(outarg->attr.mode))
+		goto out_put_forget;
+
+	*inode = fuse_iget(sb, outarg->nodeid, outarg->generation,
+			   &outarg->attr, entry_attr_timeout(outarg),
+			   attr_version);
+	err = -ENOMEM;
+	if (!*inode) {
+		fuse_send_forget(fc, forget_req, outarg->nodeid, 1);
+		goto out;
 	}
+	err = 0;
+
+ out_put_forget:
 	fuse_put_request(fc, forget_req);
-	if (err && err != -ENOENT)
-		return ERR_PTR(err);
+ out:
+	return err;
+}
+
+static struct dentry *fuse_lookup(struct inode *dir, struct dentry *entry,
+				  struct nameidata *nd)
+{
+	int err;
+	struct fuse_entry_out outarg;
+	struct inode *inode;
+	struct dentry *newent;
+	struct fuse_conn *fc = get_fuse_conn(dir);
+	bool outarg_valid = true;
+
+	err = fuse_lookup_name(dir->i_sb, get_node_id(dir), &entry->d_name,
+			       &outarg, &inode);
+	if (err == -ENOENT) {
+		outarg_valid = false;
+		err = 0;
+	}
+	if (err)
+		goto out_err;
+
+	err = -EIO;
+	if (inode && get_node_id(inode) == FUSE_ROOT_ID)
+		goto out_iput;
 
 	if (inode && S_ISDIR(inode->i_mode)) {
 		mutex_lock(&fc->inst_mutex);
-		err = fuse_d_add_directory(entry, inode);
+		newent = fuse_d_add_directory(entry, inode);
 		mutex_unlock(&fc->inst_mutex);
-		if (err) {
-			iput(inode);
-			return ERR_PTR(err);
-		}
-	} else
-		d_add(entry, inode);
+		err = PTR_ERR(newent);
+		if (IS_ERR(newent))
+			goto out_iput;
+	} else {
+		newent = d_splice_alias(inode, entry);
+	}
 
+	entry = newent ? newent : entry;
 	entry->d_op = &fuse_dentry_operations;
-	if (!err)
+	if (outarg_valid)
 		fuse_change_entry_timeout(entry, &outarg);
 	else
 		fuse_invalidate_entry_cache(entry);
-	return NULL;
+
+	return newent;
+
+ out_iput:
+	iput(inode);
+ out_err:
+	return ERR_PTR(err);
 }
 
 /*
@@ -857,7 +898,7 @@ static int fuse_access(struct inode *inode, int mask)
 		return PTR_ERR(req);
 
 	memset(&inarg, 0, sizeof(inarg));
-	inarg.mask = mask;
+	inarg.mask = mask & (MAY_READ | MAY_WRITE | MAY_EXEC);
 	req->in.h.opcode = FUSE_ACCESS;
 	req->in.h.nodeid = get_node_id(inode);
 	req->in.numargs = 1;
@@ -886,7 +927,7 @@ static int fuse_access(struct inode *inode, int mask)
  * access request is sent.  Execute permission is still checked
  * locally based on file mode.
  */
-static int fuse_permission(struct inode *inode, int mask, struct nameidata *nd)
+static int fuse_permission(struct inode *inode, int mask)
 {
 	struct fuse_conn *fc = get_fuse_conn(inode);
 	bool refreshed = false;
@@ -921,7 +962,7 @@ static int fuse_permission(struct inode *inode, int mask, struct nameidata *nd)
 		   exist.  So if permissions are revoked this won't be
 		   noticed immediately, only after the attribute
 		   timeout has expired */
-	} else if (nd && (nd->flags & (LOOKUP_ACCESS | LOOKUP_CHDIR))) {
+	} else if (mask & MAY_ACCESS) {
 		err = fuse_access(inode, mask);
 	} else if ((mask & MAY_EXEC) && S_ISREG(inode->i_mode)) {
 		if (!(inode->i_mode & S_IXUGO)) {
diff --git a/fs/fuse/file.c b/fs/fuse/file.c
index 8092f0d9fd1f..2bada6bbc317 100644
--- a/fs/fuse/file.c
+++ b/fs/fuse/file.c
@@ -893,7 +893,7 @@ static ssize_t fuse_file_aio_write(struct kiocb *iocb, const struct iovec *iov,
 	if (count == 0)
 		goto out;
 
-	err = remove_suid(file->f_path.dentry);
+	err = file_remove_suid(file);
 	if (err)
 		goto out;
 
@@ -1341,6 +1341,11 @@ static int fuse_setlk(struct file *file, struct file_lock *fl, int flock)
 	pid_t pid = fl->fl_type != F_UNLCK ? current->tgid : 0;
 	int err;
 
+	if (fl->fl_lmops && fl->fl_lmops->fl_grant) {
+		/* NLM needs asynchronous locks, which we don't support yet */
+		return -ENOLCK;
+	}
+
 	/* Unlock on close is handled by the flush method */
 	if (fl->fl_flags & FL_CLOSE)
 		return 0;
@@ -1365,7 +1370,9 @@ static int fuse_file_lock(struct file *file, int cmd, struct file_lock *fl)
 	struct fuse_conn *fc = get_fuse_conn(inode);
 	int err;
 
-	if (cmd == F_GETLK) {
+	if (cmd == F_CANCELLK) {
+		err = 0;
+	} else if (cmd == F_GETLK) {
 		if (fc->no_lock) {
 			posix_test_lock(file, fl);
 			err = 0;
@@ -1373,7 +1380,7 @@ static int fuse_file_lock(struct file *file, int cmd, struct file_lock *fl)
 			err = fuse_getlk(file, fl);
 	} else {
 		if (fc->no_lock)
-			err = posix_lock_file_wait(file, fl);
+			err = posix_lock_file(file, fl, NULL);
 		else
 			err = fuse_setlk(file, fl, 0);
 	}
diff --git a/fs/fuse/fuse_i.h b/fs/fuse/fuse_i.h
index bae948657c4f..3a876076bdd1 100644
--- a/fs/fuse/fuse_i.h
+++ b/fs/fuse/fuse_i.h
@@ -363,6 +363,9 @@ struct fuse_conn {
 	/** Do not send separate SETATTR request before open(O_TRUNC)  */
 	unsigned atomic_o_trunc : 1;
 
+	/** Filesystem supports NFS exporting.  Only set in INIT */
+	unsigned export_support : 1;
+
 	/*
 	 * The following bitfields are only for optimization purposes
 	 * and hence races in setting them will not cause malfunction
@@ -464,6 +467,8 @@ static inline u64 get_node_id(struct inode *inode)
 /** Device operations */
 extern const struct file_operations fuse_dev_operations;
 
+extern struct dentry_operations fuse_dentry_operations;
+
 /**
  * Get a filled in inode
  */
@@ -471,6 +476,9 @@ struct inode *fuse_iget(struct super_block *sb, u64 nodeid,
 			int generation, struct fuse_attr *attr,
 			u64 attr_valid, u64 attr_version);
 
+int fuse_lookup_name(struct super_block *sb, u64 nodeid, struct qstr *name,
+		     struct fuse_entry_out *outarg, struct inode **inode);
+
 /**
  * Send FORGET command
  */
@@ -604,6 +612,8 @@ void fuse_abort_conn(struct fuse_conn *fc);
  */
 void fuse_invalidate_attr(struct inode *inode);
 
+void fuse_invalidate_entry_cache(struct dentry *entry);
+
 /**
  * Acquire reference to fuse_conn
  */
diff --git a/fs/fuse/inode.c b/fs/fuse/inode.c
index 3141690558c8..d2249f174e20 100644
--- a/fs/fuse/inode.c
+++ b/fs/fuse/inode.c
@@ -18,6 +18,7 @@
 #include <linux/statfs.h>
 #include <linux/random.h>
 #include <linux/sched.h>
+#include <linux/exportfs.h>
 
 MODULE_AUTHOR("Miklos Szeredi <miklos@szeredi.hu>");
 MODULE_DESCRIPTION("Filesystem in Userspace");
@@ -552,6 +553,174 @@ static struct inode *get_root_inode(struct super_block *sb, unsigned mode)
 	return fuse_iget(sb, 1, 0, &attr, 0, 0);
 }
 
+struct fuse_inode_handle
+{
+	u64 nodeid;
+	u32 generation;
+};
+
+static struct dentry *fuse_get_dentry(struct super_block *sb,
+				      struct fuse_inode_handle *handle)
+{
+	struct fuse_conn *fc = get_fuse_conn_super(sb);
+	struct inode *inode;
+	struct dentry *entry;
+	int err = -ESTALE;
+
+	if (handle->nodeid == 0)
+		goto out_err;
+
+	inode = ilookup5(sb, handle->nodeid, fuse_inode_eq, &handle->nodeid);
+	if (!inode) {
+		struct fuse_entry_out outarg;
+		struct qstr name;
+
+		if (!fc->export_support)
+			goto out_err;
+
+		name.len = 1;
+		name.name = ".";
+		err = fuse_lookup_name(sb, handle->nodeid, &name, &outarg,
+				       &inode);
+		if (err && err != -ENOENT)
+			goto out_err;
+		if (err || !inode) {
+			err = -ESTALE;
+			goto out_err;
+		}
+		err = -EIO;
+		if (get_node_id(inode) != handle->nodeid)
+			goto out_iput;
+	}
+	err = -ESTALE;
+	if (inode->i_generation != handle->generation)
+		goto out_iput;
+
+	entry = d_alloc_anon(inode);
+	err = -ENOMEM;
+	if (!entry)
+		goto out_iput;
+
+	if (get_node_id(inode) != FUSE_ROOT_ID) {
+		entry->d_op = &fuse_dentry_operations;
+		fuse_invalidate_entry_cache(entry);
+	}
+
+	return entry;
+
+ out_iput:
+	iput(inode);
+ out_err:
+	return ERR_PTR(err);
+}
+
+static int fuse_encode_fh(struct dentry *dentry, u32 *fh, int *max_len,
+			   int connectable)
+{
+	struct inode *inode = dentry->d_inode;
+	bool encode_parent = connectable && !S_ISDIR(inode->i_mode);
+	int len = encode_parent ? 6 : 3;
+	u64 nodeid;
+	u32 generation;
+
+	if (*max_len < len)
+		return  255;
+
+	nodeid = get_fuse_inode(inode)->nodeid;
+	generation = inode->i_generation;
+
+	fh[0] = (u32)(nodeid >> 32);
+	fh[1] = (u32)(nodeid & 0xffffffff);
+	fh[2] = generation;
+
+	if (encode_parent) {
+		struct inode *parent;
+
+		spin_lock(&dentry->d_lock);
+		parent = dentry->d_parent->d_inode;
+		nodeid = get_fuse_inode(parent)->nodeid;
+		generation = parent->i_generation;
+		spin_unlock(&dentry->d_lock);
+
+		fh[3] = (u32)(nodeid >> 32);
+		fh[4] = (u32)(nodeid & 0xffffffff);
+		fh[5] = generation;
+	}
+
+	*max_len = len;
+	return encode_parent ? 0x82 : 0x81;
+}
+
+static struct dentry *fuse_fh_to_dentry(struct super_block *sb,
+		struct fid *fid, int fh_len, int fh_type)
+{
+	struct fuse_inode_handle handle;
+
+	if ((fh_type != 0x81 && fh_type != 0x82) || fh_len < 3)
+		return NULL;
+
+	handle.nodeid = (u64) fid->raw[0] << 32;
+	handle.nodeid |= (u64) fid->raw[1];
+	handle.generation = fid->raw[2];
+	return fuse_get_dentry(sb, &handle);
+}
+
+static struct dentry *fuse_fh_to_parent(struct super_block *sb,
+		struct fid *fid, int fh_len, int fh_type)
+{
+	struct fuse_inode_handle parent;
+
+	if (fh_type != 0x82 || fh_len < 6)
+		return NULL;
+
+	parent.nodeid = (u64) fid->raw[3] << 32;
+	parent.nodeid |= (u64) fid->raw[4];
+	parent.generation = fid->raw[5];
+	return fuse_get_dentry(sb, &parent);
+}
+
+static struct dentry *fuse_get_parent(struct dentry *child)
+{
+	struct inode *child_inode = child->d_inode;
+	struct fuse_conn *fc = get_fuse_conn(child_inode);
+	struct inode *inode;
+	struct dentry *parent;
+	struct fuse_entry_out outarg;
+	struct qstr name;
+	int err;
+
+	if (!fc->export_support)
+		return ERR_PTR(-ESTALE);
+
+	name.len = 2;
+	name.name = "..";
+	err = fuse_lookup_name(child_inode->i_sb, get_node_id(child_inode),
+			       &name, &outarg, &inode);
+	if (err && err != -ENOENT)
+		return ERR_PTR(err);
+	if (err || !inode)
+		return ERR_PTR(-ESTALE);
+
+	parent = d_alloc_anon(inode);
+	if (!parent) {
+		iput(inode);
+		return ERR_PTR(-ENOMEM);
+	}
+	if (get_node_id(inode) != FUSE_ROOT_ID) {
+		parent->d_op = &fuse_dentry_operations;
+		fuse_invalidate_entry_cache(parent);
+	}
+
+	return parent;
+}
+
+static const struct export_operations fuse_export_operations = {
+	.fh_to_dentry	= fuse_fh_to_dentry,
+	.fh_to_parent	= fuse_fh_to_parent,
+	.encode_fh	= fuse_encode_fh,
+	.get_parent	= fuse_get_parent,
+};
+
 static const struct super_operations fuse_super_operations = {
 	.alloc_inode    = fuse_alloc_inode,
 	.destroy_inode  = fuse_destroy_inode,
@@ -581,6 +750,11 @@ static void process_init_reply(struct fuse_conn *fc, struct fuse_req *req)
 				fc->no_lock = 1;
 			if (arg->flags & FUSE_ATOMIC_O_TRUNC)
 				fc->atomic_o_trunc = 1;
+			if (arg->minor >= 9) {
+				/* LOOKUP has dependency on proto version */
+				if (arg->flags & FUSE_EXPORT_SUPPORT)
+					fc->export_support = 1;
+			}
 			if (arg->flags & FUSE_BIG_WRITES)
 				fc->big_writes = 1;
 		} else {
@@ -607,7 +781,7 @@ static void fuse_send_init(struct fuse_conn *fc, struct fuse_req *req)
 	arg->minor = FUSE_KERNEL_MINOR_VERSION;
 	arg->max_readahead = fc->bdi.ra_pages * PAGE_CACHE_SIZE;
 	arg->flags |= FUSE_ASYNC_READ | FUSE_POSIX_LOCKS | FUSE_ATOMIC_O_TRUNC |
-		FUSE_BIG_WRITES;
+		FUSE_EXPORT_SUPPORT | FUSE_BIG_WRITES;
 	req->in.h.opcode = FUSE_INIT;
 	req->in.numargs = 1;
 	req->in.args[0].size = sizeof(*arg);
@@ -652,6 +826,7 @@ static int fuse_fill_super(struct super_block *sb, void *data, int silent)
 	sb->s_magic = FUSE_SUPER_MAGIC;
 	sb->s_op = &fuse_super_operations;
 	sb->s_maxbytes = MAX_LFS_FILESIZE;
+	sb->s_export_op = &fuse_export_operations;
 
 	file = fget(d.fd);
 	if (!file)
@@ -781,7 +956,7 @@ static inline void unregister_fuseblk(void)
 }
 #endif
 
-static void fuse_inode_init_once(struct kmem_cache *cachep, void *foo)
+static void fuse_inode_init_once(void *foo)
 {
 	struct inode * inode = foo;
 
diff --git a/fs/gfs2/inode.c b/fs/gfs2/inode.c
index 6da0ab355b8a..8b0806a32948 100644
--- a/fs/gfs2/inode.c
+++ b/fs/gfs2/inode.c
@@ -448,7 +448,7 @@ struct inode *gfs2_lookup_simple(struct inode *dip, const char *name)
 	struct qstr qstr;
 	struct inode *inode;
 	gfs2_str2qstr(&qstr, name);
-	inode = gfs2_lookupi(dip, &qstr, 1, NULL);
+	inode = gfs2_lookupi(dip, &qstr, 1);
 	/* gfs2_lookupi has inconsistent callers: vfs
 	 * related routines expect NULL for no entry found,
 	 * gfs2_lookup_simple callers expect ENOENT
@@ -477,7 +477,7 @@ struct inode *gfs2_lookup_simple(struct inode *dip, const char *name)
  */
 
 struct inode *gfs2_lookupi(struct inode *dir, const struct qstr *name,
-			   int is_root, struct nameidata *nd)
+			   int is_root)
 {
 	struct super_block *sb = dir->i_sb;
 	struct gfs2_inode *dip = GFS2_I(dir);
@@ -1173,7 +1173,7 @@ int gfs2_ok_to_move(struct gfs2_inode *this, struct gfs2_inode *to)
 			break;
 		}
 
-		tmp = gfs2_lookupi(dir, &dotdot, 1, NULL);
+		tmp = gfs2_lookupi(dir, &dotdot, 1);
 		if (IS_ERR(tmp)) {
 			error = PTR_ERR(tmp);
 			break;
diff --git a/fs/gfs2/inode.h b/fs/gfs2/inode.h
index 6074c2506f75..58f9607d6a86 100644
--- a/fs/gfs2/inode.h
+++ b/fs/gfs2/inode.h
@@ -83,7 +83,7 @@ int gfs2_inode_refresh(struct gfs2_inode *ip);
 int gfs2_dinode_dealloc(struct gfs2_inode *inode);
 int gfs2_change_nlink(struct gfs2_inode *ip, int diff);
 struct inode *gfs2_lookupi(struct inode *dir, const struct qstr *name,
-			   int is_root, struct nameidata *nd);
+			   int is_root);
 struct inode *gfs2_createi(struct gfs2_holder *ghs, const struct qstr *name,
 			   unsigned int mode, dev_t dev);
 int gfs2_rmdiri(struct gfs2_inode *dip, const struct qstr *name,
diff --git a/fs/gfs2/main.c b/fs/gfs2/main.c
index bcc668d0fadd..bb2cc303ac29 100644
--- a/fs/gfs2/main.c
+++ b/fs/gfs2/main.c
@@ -24,7 +24,7 @@
 #include "util.h"
 #include "glock.h"
 
-static void gfs2_init_inode_once(struct kmem_cache *cachep, void *foo)
+static void gfs2_init_inode_once(void *foo)
 {
 	struct gfs2_inode *ip = foo;
 
@@ -33,7 +33,7 @@ static void gfs2_init_inode_once(struct kmem_cache *cachep, void *foo)
 	ip->i_alloc = NULL;
 }
 
-static void gfs2_init_glock_once(struct kmem_cache *cachep, void *foo)
+static void gfs2_init_glock_once(void *foo)
 {
 	struct gfs2_glock *gl = foo;
 
diff --git a/fs/gfs2/ops_export.c b/fs/gfs2/ops_export.c
index 990d9f4bc463..9cda8536530c 100644
--- a/fs/gfs2/ops_export.c
+++ b/fs/gfs2/ops_export.c
@@ -134,7 +134,7 @@ static struct dentry *gfs2_get_parent(struct dentry *child)
 	struct dentry *dentry;
 
 	gfs2_str2qstr(&dotdot, "..");
-	inode = gfs2_lookupi(child->d_inode, &dotdot, 1, NULL);
+	inode = gfs2_lookupi(child->d_inode, &dotdot, 1);
 
 	if (!inode)
 		return ERR_PTR(-ENOENT);
diff --git a/fs/gfs2/ops_inode.c b/fs/gfs2/ops_inode.c
index 1e252dfc5294..e2c62f73a778 100644
--- a/fs/gfs2/ops_inode.c
+++ b/fs/gfs2/ops_inode.c
@@ -74,7 +74,7 @@ static int gfs2_create(struct inode *dir, struct dentry *dentry,
 			return PTR_ERR(inode);
 		}
 
-		inode = gfs2_lookupi(dir, &dentry->d_name, 0, nd);
+		inode = gfs2_lookupi(dir, &dentry->d_name, 0);
 		if (inode) {
 			if (!IS_ERR(inode)) {
 				gfs2_holder_uninit(ghs);
@@ -109,7 +109,7 @@ static struct dentry *gfs2_lookup(struct inode *dir, struct dentry *dentry,
 
 	dentry->d_op = &gfs2_dops;
 
-	inode = gfs2_lookupi(dir, &dentry->d_name, 0, nd);
+	inode = gfs2_lookupi(dir, &dentry->d_name, 0);
 	if (inode && IS_ERR(inode))
 		return ERR_CAST(inode);
 
@@ -915,12 +915,6 @@ int gfs2_permission(struct inode *inode, int mask)
 	return error;
 }
 
-static int gfs2_iop_permission(struct inode *inode, int mask,
-			       struct nameidata *nd)
-{
-	return gfs2_permission(inode, mask);
-}
-
 static int setattr_size(struct inode *inode, struct iattr *attr)
 {
 	struct gfs2_inode *ip = GFS2_I(inode);
@@ -1150,7 +1144,7 @@ static int gfs2_removexattr(struct dentry *dentry, const char *name)
 }
 
 const struct inode_operations gfs2_file_iops = {
-	.permission = gfs2_iop_permission,
+	.permission = gfs2_permission,
 	.setattr = gfs2_setattr,
 	.getattr = gfs2_getattr,
 	.setxattr = gfs2_setxattr,
@@ -1169,7 +1163,7 @@ const struct inode_operations gfs2_dir_iops = {
 	.rmdir = gfs2_rmdir,
 	.mknod = gfs2_mknod,
 	.rename = gfs2_rename,
-	.permission = gfs2_iop_permission,
+	.permission = gfs2_permission,
 	.setattr = gfs2_setattr,
 	.getattr = gfs2_getattr,
 	.setxattr = gfs2_setxattr,
@@ -1181,7 +1175,7 @@ const struct inode_operations gfs2_dir_iops = {
 const struct inode_operations gfs2_symlink_iops = {
 	.readlink = gfs2_readlink,
 	.follow_link = gfs2_follow_link,
-	.permission = gfs2_iop_permission,
+	.permission = gfs2_permission,
 	.setattr = gfs2_setattr,
 	.getattr = gfs2_getattr,
 	.setxattr = gfs2_setxattr,
diff --git a/fs/gfs2/super.c b/fs/gfs2/super.c
index 63a8a902d9db..ca831991cbc2 100644
--- a/fs/gfs2/super.c
+++ b/fs/gfs2/super.c
@@ -389,7 +389,7 @@ int gfs2_jindex_hold(struct gfs2_sbd *sdp, struct gfs2_holder *ji_gh)
 			break;
 
 		INIT_LIST_HEAD(&jd->extent_list);
-		jd->jd_inode = gfs2_lookupi(sdp->sd_jindex, &name, 1, NULL);
+		jd->jd_inode = gfs2_lookupi(sdp->sd_jindex, &name, 1);
 		if (!jd->jd_inode || IS_ERR(jd->jd_inode)) {
 			if (!jd->jd_inode)
 				error = -ENOENT;
diff --git a/fs/hfs/bitmap.c b/fs/hfs/bitmap.c
index 24e75798ddf0..c6e97366e8ac 100644
--- a/fs/hfs/bitmap.c
+++ b/fs/hfs/bitmap.c
@@ -145,7 +145,7 @@ u32 hfs_vbm_search_free(struct super_block *sb, u32 goal, u32 *num_bits)
 	if (!*num_bits)
 		return 0;
 
-	down(&HFS_SB(sb)->bitmap_lock);
+	mutex_lock(&HFS_SB(sb)->bitmap_lock);
 	bitmap = HFS_SB(sb)->bitmap;
 
 	pos = hfs_find_set_zero_bits(bitmap, HFS_SB(sb)->fs_ablocks, goal, num_bits);
@@ -162,7 +162,7 @@ u32 hfs_vbm_search_free(struct super_block *sb, u32 goal, u32 *num_bits)
 	HFS_SB(sb)->free_ablocks -= *num_bits;
 	hfs_bitmap_dirty(sb);
 out:
-	up(&HFS_SB(sb)->bitmap_lock);
+	mutex_unlock(&HFS_SB(sb)->bitmap_lock);
 	return pos;
 }
 
@@ -205,7 +205,7 @@ int hfs_clear_vbm_bits(struct super_block *sb, u16 start, u16 count)
 	if ((start + count) > HFS_SB(sb)->fs_ablocks)
 		return -2;
 
-	down(&HFS_SB(sb)->bitmap_lock);
+	mutex_lock(&HFS_SB(sb)->bitmap_lock);
 	/* bitmap is always on a 32-bit boundary */
 	curr = HFS_SB(sb)->bitmap + (start / 32);
 	len = count;
@@ -236,7 +236,7 @@ int hfs_clear_vbm_bits(struct super_block *sb, u16 start, u16 count)
 	}
 out:
 	HFS_SB(sb)->free_ablocks += len;
-	up(&HFS_SB(sb)->bitmap_lock);
+	mutex_unlock(&HFS_SB(sb)->bitmap_lock);
 	hfs_bitmap_dirty(sb);
 
 	return 0;
diff --git a/fs/hfs/btree.c b/fs/hfs/btree.c
index f6621a785202..9b9d6395bad3 100644
--- a/fs/hfs/btree.c
+++ b/fs/hfs/btree.c
@@ -40,7 +40,7 @@ struct hfs_btree *hfs_btree_open(struct super_block *sb, u32 id, btree_keycmp ke
 	{
 	struct hfs_mdb *mdb = HFS_SB(sb)->mdb;
 	HFS_I(tree->inode)->flags = 0;
-	init_MUTEX(&HFS_I(tree->inode)->extents_lock);
+	mutex_init(&HFS_I(tree->inode)->extents_lock);
 	switch (id) {
 	case HFS_EXT_CNID:
 		hfs_inode_read_fork(tree->inode, mdb->drXTExtRec, mdb->drXTFlSize,
diff --git a/fs/hfs/extent.c b/fs/hfs/extent.c
index c176f67ba0a5..2c16316d2917 100644
--- a/fs/hfs/extent.c
+++ b/fs/hfs/extent.c
@@ -343,16 +343,16 @@ int hfs_get_block(struct inode *inode, sector_t block,
 		goto done;
 	}
 
-	down(&HFS_I(inode)->extents_lock);
+	mutex_lock(&HFS_I(inode)->extents_lock);
 	res = hfs_ext_read_extent(inode, ablock);
 	if (!res)
 		dblock = hfs_ext_find_block(HFS_I(inode)->cached_extents,
 					    ablock - HFS_I(inode)->cached_start);
 	else {
-		up(&HFS_I(inode)->extents_lock);
+		mutex_unlock(&HFS_I(inode)->extents_lock);
 		return -EIO;
 	}
-	up(&HFS_I(inode)->extents_lock);
+	mutex_unlock(&HFS_I(inode)->extents_lock);
 
 done:
 	map_bh(bh_result, sb, HFS_SB(sb)->fs_start +
@@ -375,7 +375,7 @@ int hfs_extend_file(struct inode *inode)
 	u32 start, len, goal;
 	int res;
 
-	down(&HFS_I(inode)->extents_lock);
+	mutex_lock(&HFS_I(inode)->extents_lock);
 	if (HFS_I(inode)->alloc_blocks == HFS_I(inode)->first_blocks)
 		goal = hfs_ext_lastblock(HFS_I(inode)->first_extents);
 	else {
@@ -425,7 +425,7 @@ int hfs_extend_file(struct inode *inode)
 			goto insert_extent;
 	}
 out:
-	up(&HFS_I(inode)->extents_lock);
+	mutex_unlock(&HFS_I(inode)->extents_lock);
 	if (!res) {
 		HFS_I(inode)->alloc_blocks += len;
 		mark_inode_dirty(inode);
@@ -487,7 +487,7 @@ void hfs_file_truncate(struct inode *inode)
 	if (blk_cnt == alloc_cnt)
 		goto out;
 
-	down(&HFS_I(inode)->extents_lock);
+	mutex_lock(&HFS_I(inode)->extents_lock);
 	hfs_find_init(HFS_SB(sb)->ext_tree, &fd);
 	while (1) {
 		if (alloc_cnt == HFS_I(inode)->first_blocks) {
@@ -514,7 +514,7 @@ void hfs_file_truncate(struct inode *inode)
 		hfs_brec_remove(&fd);
 	}
 	hfs_find_exit(&fd);
-	up(&HFS_I(inode)->extents_lock);
+	mutex_unlock(&HFS_I(inode)->extents_lock);
 
 	HFS_I(inode)->alloc_blocks = blk_cnt;
 out:
diff --git a/fs/hfs/hfs_fs.h b/fs/hfs/hfs_fs.h
index 147374b6f675..9955232fdf8c 100644
--- a/fs/hfs/hfs_fs.h
+++ b/fs/hfs/hfs_fs.h
@@ -11,6 +11,7 @@
 
 #include <linux/slab.h>
 #include <linux/types.h>
+#include <linux/mutex.h>
 #include <linux/buffer_head.h>
 #include <linux/fs.h>
 
@@ -53,7 +54,7 @@ struct hfs_inode_info {
 	struct list_head open_dir_list;
 	struct inode *rsrc_inode;
 
-	struct semaphore extents_lock;
+	struct mutex extents_lock;
 
 	u16 alloc_blocks, clump_blocks;
 	sector_t fs_blocks;
@@ -139,7 +140,7 @@ struct hfs_sb_info {
 
 	struct nls_table *nls_io, *nls_disk;
 
-	struct semaphore bitmap_lock;
+	struct mutex bitmap_lock;
 
 	unsigned long flags;
 
diff --git a/fs/hfs/inode.c b/fs/hfs/inode.c
index 97f8446c4ff4..7e19835efa2e 100644
--- a/fs/hfs/inode.c
+++ b/fs/hfs/inode.c
@@ -150,7 +150,7 @@ struct inode *hfs_new_inode(struct inode *dir, struct qstr *name, int mode)
 	if (!inode)
 		return NULL;
 
-	init_MUTEX(&HFS_I(inode)->extents_lock);
+	mutex_init(&HFS_I(inode)->extents_lock);
 	INIT_LIST_HEAD(&HFS_I(inode)->open_dir_list);
 	hfs_cat_build_key(sb, (btree_key *)&HFS_I(inode)->cat_key, dir->i_ino, name);
 	inode->i_ino = HFS_SB(sb)->next_id++;
@@ -281,7 +281,7 @@ static int hfs_read_inode(struct inode *inode, void *data)
 
 	HFS_I(inode)->flags = 0;
 	HFS_I(inode)->rsrc_inode = NULL;
-	init_MUTEX(&HFS_I(inode)->extents_lock);
+	mutex_init(&HFS_I(inode)->extents_lock);
 	INIT_LIST_HEAD(&HFS_I(inode)->open_dir_list);
 
 	/* Initialize the inode */
@@ -511,8 +511,7 @@ void hfs_clear_inode(struct inode *inode)
 	}
 }
 
-static int hfs_permission(struct inode *inode, int mask,
-			  struct nameidata *nd)
+static int hfs_permission(struct inode *inode, int mask)
 {
 	if (S_ISREG(inode->i_mode) && mask & MAY_EXEC)
 		return 0;
@@ -523,8 +522,6 @@ static int hfs_file_open(struct inode *inode, struct file *file)
 {
 	if (HFS_IS_RSRC(inode))
 		inode = HFS_I(inode)->rsrc_inode;
-	if (atomic_read(&file->f_count) != 1)
-		return 0;
 	atomic_inc(&HFS_I(inode)->opencnt);
 	return 0;
 }
@@ -535,8 +532,6 @@ static int hfs_file_release(struct inode *inode, struct file *file)
 
 	if (HFS_IS_RSRC(inode))
 		inode = HFS_I(inode)->rsrc_inode;
-	if (atomic_read(&file->f_count) != 0)
-		return 0;
 	if (atomic_dec_and_test(&HFS_I(inode)->opencnt)) {
 		mutex_lock(&inode->i_mutex);
 		hfs_file_truncate(inode);
diff --git a/fs/hfs/super.c b/fs/hfs/super.c
index 8cf67974adf6..4abb1047c689 100644
--- a/fs/hfs/super.c
+++ b/fs/hfs/super.c
@@ -372,7 +372,7 @@ static int hfs_fill_super(struct super_block *sb, void *data, int silent)
 
 	sb->s_op = &hfs_super_operations;
 	sb->s_flags |= MS_NODIRATIME;
-	init_MUTEX(&sbi->bitmap_lock);
+	mutex_init(&sbi->bitmap_lock);
 
 	res = hfs_mdb_get(sb);
 	if (res) {
@@ -432,7 +432,7 @@ static struct file_system_type hfs_fs_type = {
 	.fs_flags	= FS_REQUIRES_DEV,
 };
 
-static void hfs_init_once(struct kmem_cache *cachep, void *p)
+static void hfs_init_once(void *p)
 {
 	struct hfs_inode_info *i = p;
 
diff --git a/fs/hfsplus/extents.c b/fs/hfsplus/extents.c
index 12e899cd7886..fec8f61227ff 100644
--- a/fs/hfsplus/extents.c
+++ b/fs/hfsplus/extents.c
@@ -199,16 +199,16 @@ int hfsplus_get_block(struct inode *inode, sector_t iblock,
 		goto done;
 	}
 
-	down(&HFSPLUS_I(inode).extents_lock);
+	mutex_lock(&HFSPLUS_I(inode).extents_lock);
 	res = hfsplus_ext_read_extent(inode, ablock);
 	if (!res) {
 		dblock = hfsplus_ext_find_block(HFSPLUS_I(inode).cached_extents, ablock -
 					     HFSPLUS_I(inode).cached_start);
 	} else {
-		up(&HFSPLUS_I(inode).extents_lock);
+		mutex_unlock(&HFSPLUS_I(inode).extents_lock);
 		return -EIO;
 	}
-	up(&HFSPLUS_I(inode).extents_lock);
+	mutex_unlock(&HFSPLUS_I(inode).extents_lock);
 
 done:
 	dprint(DBG_EXTENT, "get_block(%lu): %llu - %u\n", inode->i_ino, (long long)iblock, dblock);
@@ -355,7 +355,7 @@ int hfsplus_file_extend(struct inode *inode)
 		return -ENOSPC;
 	}
 
-	down(&HFSPLUS_I(inode).extents_lock);
+	mutex_lock(&HFSPLUS_I(inode).extents_lock);
 	if (HFSPLUS_I(inode).alloc_blocks == HFSPLUS_I(inode).first_blocks)
 		goal = hfsplus_ext_lastblock(HFSPLUS_I(inode).first_extents);
 	else {
@@ -408,7 +408,7 @@ int hfsplus_file_extend(struct inode *inode)
 			goto insert_extent;
 	}
 out:
-	up(&HFSPLUS_I(inode).extents_lock);
+	mutex_unlock(&HFSPLUS_I(inode).extents_lock);
 	if (!res) {
 		HFSPLUS_I(inode).alloc_blocks += len;
 		mark_inode_dirty(inode);
@@ -465,7 +465,7 @@ void hfsplus_file_truncate(struct inode *inode)
 	if (blk_cnt == alloc_cnt)
 		goto out;
 
-	down(&HFSPLUS_I(inode).extents_lock);
+	mutex_lock(&HFSPLUS_I(inode).extents_lock);
 	hfs_find_init(HFSPLUS_SB(sb).ext_tree, &fd);
 	while (1) {
 		if (alloc_cnt == HFSPLUS_I(inode).first_blocks) {
@@ -492,7 +492,7 @@ void hfsplus_file_truncate(struct inode *inode)
 		hfs_brec_remove(&fd);
 	}
 	hfs_find_exit(&fd);
-	up(&HFSPLUS_I(inode).extents_lock);
+	mutex_unlock(&HFSPLUS_I(inode).extents_lock);
 
 	HFSPLUS_I(inode).alloc_blocks = blk_cnt;
 out:
diff --git a/fs/hfsplus/hfsplus_fs.h b/fs/hfsplus/hfsplus_fs.h
index 9e59537b43d5..f027a905225f 100644
--- a/fs/hfsplus/hfsplus_fs.h
+++ b/fs/hfsplus/hfsplus_fs.h
@@ -11,6 +11,7 @@
 #define _LINUX_HFSPLUS_FS_H
 
 #include <linux/fs.h>
+#include <linux/mutex.h>
 #include <linux/buffer_head.h>
 #include "hfsplus_raw.h"
 
@@ -154,7 +155,7 @@ struct hfsplus_sb_info {
 
 
 struct hfsplus_inode_info {
-	struct semaphore extents_lock;
+	struct mutex extents_lock;
 	u32 clump_blocks, alloc_blocks;
 	sector_t fs_blocks;
 	/* Allocation extents from catalog record or volume header */
diff --git a/fs/hfsplus/inode.c b/fs/hfsplus/inode.c
index 67e1c8b467c4..b085d64a2b67 100644
--- a/fs/hfsplus/inode.c
+++ b/fs/hfsplus/inode.c
@@ -163,7 +163,7 @@ static struct dentry *hfsplus_file_lookup(struct inode *dir, struct dentry *dent
 
 	inode->i_ino = dir->i_ino;
 	INIT_LIST_HEAD(&HFSPLUS_I(inode).open_dir_list);
-	init_MUTEX(&HFSPLUS_I(inode).extents_lock);
+	mutex_init(&HFSPLUS_I(inode).extents_lock);
 	HFSPLUS_I(inode).flags = HFSPLUS_FLG_RSRC;
 
 	hfs_find_init(HFSPLUS_SB(sb).cat_tree, &fd);
@@ -238,7 +238,7 @@ static void hfsplus_set_perms(struct inode *inode, struct hfsplus_perm *perms)
 	perms->dev = cpu_to_be32(HFSPLUS_I(inode).dev);
 }
 
-static int hfsplus_permission(struct inode *inode, int mask, struct nameidata *nd)
+static int hfsplus_permission(struct inode *inode, int mask)
 {
 	/* MAY_EXEC is also used for lookup, if no x bit is set allow lookup,
 	 * open_exec has the same test, so it's still not executable, if a x bit
@@ -254,8 +254,6 @@ static int hfsplus_file_open(struct inode *inode, struct file *file)
 {
 	if (HFSPLUS_IS_RSRC(inode))
 		inode = HFSPLUS_I(inode).rsrc_inode;
-	if (atomic_read(&file->f_count) != 1)
-		return 0;
 	atomic_inc(&HFSPLUS_I(inode).opencnt);
 	return 0;
 }
@@ -266,8 +264,6 @@ static int hfsplus_file_release(struct inode *inode, struct file *file)
 
 	if (HFSPLUS_IS_RSRC(inode))
 		inode = HFSPLUS_I(inode).rsrc_inode;
-	if (atomic_read(&file->f_count) != 0)
-		return 0;
 	if (atomic_dec_and_test(&HFSPLUS_I(inode).opencnt)) {
 		mutex_lock(&inode->i_mutex);
 		hfsplus_file_truncate(inode);
@@ -316,7 +312,7 @@ struct inode *hfsplus_new_inode(struct super_block *sb, int mode)
 	inode->i_nlink = 1;
 	inode->i_mtime = inode->i_atime = inode->i_ctime = CURRENT_TIME_SEC;
 	INIT_LIST_HEAD(&HFSPLUS_I(inode).open_dir_list);
-	init_MUTEX(&HFSPLUS_I(inode).extents_lock);
+	mutex_init(&HFSPLUS_I(inode).extents_lock);
 	atomic_set(&HFSPLUS_I(inode).opencnt, 0);
 	HFSPLUS_I(inode).flags = 0;
 	memset(HFSPLUS_I(inode).first_extents, 0, sizeof(hfsplus_extent_rec));
diff --git a/fs/hfsplus/super.c b/fs/hfsplus/super.c
index ce97a54518d8..e834e578c93f 100644
--- a/fs/hfsplus/super.c
+++ b/fs/hfsplus/super.c
@@ -34,7 +34,7 @@ struct inode *hfsplus_iget(struct super_block *sb, unsigned long ino)
 		return inode;
 
 	INIT_LIST_HEAD(&HFSPLUS_I(inode).open_dir_list);
-	init_MUTEX(&HFSPLUS_I(inode).extents_lock);
+	mutex_init(&HFSPLUS_I(inode).extents_lock);
 	HFSPLUS_I(inode).flags = 0;
 	HFSPLUS_I(inode).rsrc_inode = NULL;
 	atomic_set(&HFSPLUS_I(inode).opencnt, 0);
@@ -485,7 +485,7 @@ static struct file_system_type hfsplus_fs_type = {
 	.fs_flags	= FS_REQUIRES_DEV,
 };
 
-static void hfsplus_init_once(struct kmem_cache *cachep, void *p)
+static void hfsplus_init_once(void *p)
 {
 	struct hfsplus_inode_info *i = p;
 
diff --git a/fs/hostfs/hostfs_kern.c b/fs/hostfs/hostfs_kern.c
index 5222345ddccf..d6ecabf4d231 100644
--- a/fs/hostfs/hostfs_kern.c
+++ b/fs/hostfs/hostfs_kern.c
@@ -822,7 +822,7 @@ int hostfs_rename(struct inode *from_ino, struct dentry *from,
 	return err;
 }
 
-int hostfs_permission(struct inode *ino, int desired, struct nameidata *nd)
+int hostfs_permission(struct inode *ino, int desired)
 {
 	char *name;
 	int r = 0, w = 0, x = 0, err;
diff --git a/fs/hpfs/namei.c b/fs/hpfs/namei.c
index d256559b4104..d9c59a775449 100644
--- a/fs/hpfs/namei.c
+++ b/fs/hpfs/namei.c
@@ -415,7 +415,7 @@ again:
 		d_drop(dentry);
 		spin_lock(&dentry->d_lock);
 		if (atomic_read(&dentry->d_count) > 1 ||
-		    permission(inode, MAY_WRITE, NULL) ||
+		    generic_permission(inode, MAY_WRITE, NULL) ||
 		    !S_ISREG(inode->i_mode) ||
 		    get_write_access(inode)) {
 			spin_unlock(&dentry->d_lock);
diff --git a/fs/hpfs/super.c b/fs/hpfs/super.c
index f63a699ec659..b8ae9c90ada0 100644
--- a/fs/hpfs/super.c
+++ b/fs/hpfs/super.c
@@ -173,7 +173,7 @@ static void hpfs_destroy_inode(struct inode *inode)
 	kmem_cache_free(hpfs_inode_cachep, hpfs_i(inode));
 }
 
-static void init_once(struct kmem_cache *cachep, void *foo)
+static void init_once(void *foo)
 {
 	struct hpfs_inode_info *ei = (struct hpfs_inode_info *) foo;
 
diff --git a/fs/hppfs/hppfs.c b/fs/hppfs/hppfs.c
index 65077aa90f0a..2b3d1828db99 100644
--- a/fs/hppfs/hppfs.c
+++ b/fs/hppfs/hppfs.c
@@ -655,20 +655,13 @@ static void *hppfs_follow_link(struct dentry *dentry, struct nameidata *nd)
 	return proc_dentry->d_inode->i_op->follow_link(proc_dentry, nd);
 }
 
-int hppfs_permission(struct inode *inode, int mask, struct nameidata *nd)
-{
-	return generic_permission(inode, mask, NULL);
-}
-
 static const struct inode_operations hppfs_dir_iops = {
 	.lookup		= hppfs_lookup,
-	.permission	= hppfs_permission,
 };
 
 static const struct inode_operations hppfs_link_iops = {
 	.readlink	= hppfs_readlink,
 	.follow_link	= hppfs_follow_link,
-	.permission	= hppfs_permission,
 };
 
 static struct inode *get_inode(struct super_block *sb, struct dentry *dentry)
diff --git a/fs/hugetlbfs/inode.c b/fs/hugetlbfs/inode.c
index dbd01d262ca4..3f58923fb39b 100644
--- a/fs/hugetlbfs/inode.c
+++ b/fs/hugetlbfs/inode.c
@@ -705,7 +705,7 @@ static const struct address_space_operations hugetlbfs_aops = {
 };
 
 
-static void init_once(struct kmem_cache *cachep, void *foo)
+static void init_once(void *foo)
 {
 	struct hugetlbfs_inode_info *ei = (struct hugetlbfs_inode_info *)foo;
 
diff --git a/fs/inode.c b/fs/inode.c
index c36d9480335c..0487ddba1397 100644
--- a/fs/inode.c
+++ b/fs/inode.c
@@ -166,6 +166,7 @@ static struct inode *alloc_inode(struct super_block *sb)
 		mapping_set_gfp_mask(mapping, GFP_HIGHUSER_PAGECACHE);
 		mapping->assoc_mapping = NULL;
 		mapping->backing_dev_info = &default_backing_dev_info;
+		mapping->writeback_index = 0;
 
 		/*
 		 * If the block_device provides a backing_dev_info for client
@@ -209,7 +210,7 @@ void inode_init_once(struct inode *inode)
 	INIT_LIST_HEAD(&inode->i_dentry);
 	INIT_LIST_HEAD(&inode->i_devices);
 	INIT_RADIX_TREE(&inode->i_data.page_tree, GFP_ATOMIC);
-	rwlock_init(&inode->i_data.tree_lock);
+	spin_lock_init(&inode->i_data.tree_lock);
 	spin_lock_init(&inode->i_data.i_mmap_lock);
 	INIT_LIST_HEAD(&inode->i_data.private_list);
 	spin_lock_init(&inode->i_data.private_lock);
@@ -224,7 +225,7 @@ void inode_init_once(struct inode *inode)
 
 EXPORT_SYMBOL(inode_init_once);
 
-static void init_once(struct kmem_cache * cachep, void *foo)
+static void init_once(void *foo)
 {
 	struct inode * inode = (struct inode *) foo;
 
diff --git a/fs/inotify_user.c b/fs/inotify_user.c
index fe79c25d95dc..60249429a253 100644
--- a/fs/inotify_user.c
+++ b/fs/inotify_user.c
@@ -354,20 +354,20 @@ static void inotify_dev_event_dequeue(struct inotify_device *dev)
 }
 
 /*
- * find_inode - resolve a user-given path to a specific inode and return a nd
+ * find_inode - resolve a user-given path to a specific inode
  */
-static int find_inode(const char __user *dirname, struct nameidata *nd,
+static int find_inode(const char __user *dirname, struct path *path,
 		      unsigned flags)
 {
 	int error;
 
-	error = __user_walk(dirname, flags, nd);
+	error = user_path_at(AT_FDCWD, dirname, flags, path);
 	if (error)
 		return error;
 	/* you can only watch an inode if you have read permissions on it */
-	error = vfs_permission(nd, MAY_READ);
+	error = inode_permission(path->dentry->d_inode, MAY_READ);
 	if (error)
-		path_put(&nd->path);
+		path_put(path);
 	return error;
 }
 
@@ -650,11 +650,11 @@ asmlinkage long sys_inotify_init(void)
 	return sys_inotify_init1(0);
 }
 
-asmlinkage long sys_inotify_add_watch(int fd, const char __user *path, u32 mask)
+asmlinkage long sys_inotify_add_watch(int fd, const char __user *pathname, u32 mask)
 {
 	struct inode *inode;
 	struct inotify_device *dev;
-	struct nameidata nd;
+	struct path path;
 	struct file *filp;
 	int ret, fput_needed;
 	unsigned flags = 0;
@@ -674,12 +674,12 @@ asmlinkage long sys_inotify_add_watch(int fd, const char __user *path, u32 mask)
 	if (mask & IN_ONLYDIR)
 		flags |= LOOKUP_DIRECTORY;
 
-	ret = find_inode(path, &nd, flags);
+	ret = find_inode(pathname, &path, flags);
 	if (unlikely(ret))
 		goto fput_and_out;
 
-	/* inode held in place by reference to nd; dev by fget on fd */
-	inode = nd.path.dentry->d_inode;
+	/* inode held in place by reference to path; dev by fget on fd */
+	inode = path.dentry->d_inode;
 	dev = filp->private_data;
 
 	mutex_lock(&dev->up_mutex);
@@ -688,7 +688,7 @@ asmlinkage long sys_inotify_add_watch(int fd, const char __user *path, u32 mask)
 		ret = create_watch(dev, inode, mask);
 	mutex_unlock(&dev->up_mutex);
 
-	path_put(&nd.path);
+	path_put(&path);
 fput_and_out:
 	fput_light(filp, fput_needed);
 	return ret;
diff --git a/fs/ioprio.c b/fs/ioprio.c
index c4a1c3c65aac..da3cc460d4df 100644
--- a/fs/ioprio.c
+++ b/fs/ioprio.c
@@ -115,11 +115,11 @@ asmlinkage long sys_ioprio_set(int which, int who, int ioprio)
 				pgrp = task_pgrp(current);
 			else
 				pgrp = find_vpid(who);
-			do_each_pid_task(pgrp, PIDTYPE_PGID, p) {
+			do_each_pid_thread(pgrp, PIDTYPE_PGID, p) {
 				ret = set_task_ioprio(p, ioprio);
 				if (ret)
 					break;
-			} while_each_pid_task(pgrp, PIDTYPE_PGID, p);
+			} while_each_pid_thread(pgrp, PIDTYPE_PGID, p);
 			break;
 		case IOPRIO_WHO_USER:
 			if (!who)
@@ -204,7 +204,7 @@ asmlinkage long sys_ioprio_get(int which, int who)
 				pgrp = task_pgrp(current);
 			else
 				pgrp = find_vpid(who);
-			do_each_pid_task(pgrp, PIDTYPE_PGID, p) {
+			do_each_pid_thread(pgrp, PIDTYPE_PGID, p) {
 				tmpio = get_task_ioprio(p);
 				if (tmpio < 0)
 					continue;
@@ -212,7 +212,7 @@ asmlinkage long sys_ioprio_get(int which, int who)
 					ret = tmpio;
 				else
 					ret = ioprio_best(ret, tmpio);
-			} while_each_pid_task(pgrp, PIDTYPE_PGID, p);
+			} while_each_pid_thread(pgrp, PIDTYPE_PGID, p);
 			break;
 		case IOPRIO_WHO_USER:
 			if (!who)
diff --git a/fs/isofs/inode.c b/fs/isofs/inode.c
index 044a254d526b..26948a6033b6 100644
--- a/fs/isofs/inode.c
+++ b/fs/isofs/inode.c
@@ -73,7 +73,7 @@ static void isofs_destroy_inode(struct inode *inode)
 	kmem_cache_free(isofs_inode_cachep, ISOFS_I(inode));
 }
 
-static void init_once(struct kmem_cache *cachep, void *foo)
+static void init_once(void *foo)
 {
 	struct iso_inode_info *ei = foo;
 
diff --git a/fs/isofs/rock.c b/fs/isofs/rock.c
index 6bd48f0a7047..c2fb2dd0131f 100644
--- a/fs/isofs/rock.c
+++ b/fs/isofs/rock.c
@@ -209,6 +209,11 @@ repeat:
 
 	while (rs.len > 2) { /* There may be one byte for padding somewhere */
 		rr = (struct rock_ridge *)rs.chr;
+		/*
+		 * Ignore rock ridge info if rr->len is out of range, but
+		 * don't return -EIO because that would make the file
+		 * invisible.
+		 */
 		if (rr->len < 3)
 			goto out;	/* Something got screwed up here */
 		sig = isonum_721(rs.chr);
@@ -216,8 +221,12 @@ repeat:
 			goto eio;
 		rs.chr += rr->len;
 		rs.len -= rr->len;
+		/*
+		 * As above, just ignore the rock ridge info if rr->len
+		 * is bogus.
+		 */
 		if (rs.len < 0)
-			goto eio;	/* corrupted isofs */
+			goto out;	/* Something got screwed up here */
 
 		switch (sig) {
 		case SIG('R', 'R'):
@@ -307,6 +316,11 @@ parse_rock_ridge_inode_internal(struct iso_directory_record *de,
 repeat:
 	while (rs.len > 2) { /* There may be one byte for padding somewhere */
 		rr = (struct rock_ridge *)rs.chr;
+		/*
+		 * Ignore rock ridge info if rr->len is out of range, but
+		 * don't return -EIO because that would make the file
+		 * invisible.
+		 */
 		if (rr->len < 3)
 			goto out;	/* Something got screwed up here */
 		sig = isonum_721(rs.chr);
@@ -314,8 +328,12 @@ repeat:
 			goto eio;
 		rs.chr += rr->len;
 		rs.len -= rr->len;
+		/*
+		 * As above, just ignore the rock ridge info if rr->len
+		 * is bogus.
+		 */
 		if (rs.len < 0)
-			goto eio;	/* corrupted isofs */
+			goto out;	/* Something got screwed up here */
 
 		switch (sig) {
 #ifndef CONFIG_ZISOFS		/* No flag for SF or ZF */
diff --git a/fs/jbd/commit.c b/fs/jbd/commit.c
index 5a8ca61498ca..ae08c057e751 100644
--- a/fs/jbd/commit.c
+++ b/fs/jbd/commit.c
@@ -36,7 +36,7 @@ static void journal_end_buffer_io_sync(struct buffer_head *bh, int uptodate)
 
 /*
  * When an ext3-ordered file is truncated, it is possible that many pages are
- * not sucessfully freed, because they are attached to a committing transaction.
+ * not successfully freed, because they are attached to a committing transaction.
  * After the transaction commits, these pages are left on the LRU, with no
  * ->mapping, and with attached buffers.  These pages are trivially reclaimable
  * by the VM, but their apparent absence upsets the VM accounting, and it makes
@@ -45,8 +45,8 @@ static void journal_end_buffer_io_sync(struct buffer_head *bh, int uptodate)
  * So here, we have a buffer which has just come off the forget list.  Look to
  * see if we can strip all buffers from the backing page.
  *
- * Called under lock_journal(), and possibly under journal_datalist_lock.  The
- * caller provided us with a ref against the buffer, and we drop that here.
+ * Called under journal->j_list_lock.  The caller provided us with a ref
+ * against the buffer, and we drop that here.
  */
 static void release_buffer_page(struct buffer_head *bh)
 {
@@ -63,7 +63,7 @@ static void release_buffer_page(struct buffer_head *bh)
 		goto nope;
 
 	/* OK, it's a truncated page */
-	if (TestSetPageLocked(page))
+	if (!trylock_page(page))
 		goto nope;
 
 	page_cache_get(page);
@@ -78,6 +78,19 @@ nope:
 }
 
 /*
+ * Decrement reference counter for data buffer. If it has been marked
+ * 'BH_Freed', release it and the page to which it belongs if possible.
+ */
+static void release_data_buffer(struct buffer_head *bh)
+{
+	if (buffer_freed(bh)) {
+		clear_buffer_freed(bh);
+		release_buffer_page(bh);
+	} else
+		put_bh(bh);
+}
+
+/*
  * Try to acquire jbd_lock_bh_state() against the buffer, when j_list_lock is
  * held.  For ranking reasons we must trylock.  If we lose, schedule away and
  * return 0.  j_list_lock is dropped in this case.
@@ -172,7 +185,7 @@ static void journal_do_submit_data(struct buffer_head **wbuf, int bufs)
 /*
  *  Submit all the data buffers to disk
  */
-static void journal_submit_data_buffers(journal_t *journal,
+static int journal_submit_data_buffers(journal_t *journal,
 				transaction_t *commit_transaction)
 {
 	struct journal_head *jh;
@@ -180,6 +193,7 @@ static void journal_submit_data_buffers(journal_t *journal,
 	int locked;
 	int bufs = 0;
 	struct buffer_head **wbuf = journal->j_wbuf;
+	int err = 0;
 
 	/*
 	 * Whenever we unlock the journal and sleep, things can get added
@@ -207,7 +221,7 @@ write_out_data:
 		 * blocking lock_buffer().
 		 */
 		if (buffer_dirty(bh)) {
-			if (test_set_buffer_locked(bh)) {
+			if (!trylock_buffer(bh)) {
 				BUFFER_TRACE(bh, "needs blocking lock");
 				spin_unlock(&journal->j_list_lock);
 				/* Write out all data to prevent deadlocks */
@@ -231,7 +245,7 @@ write_out_data:
 			if (locked)
 				unlock_buffer(bh);
 			BUFFER_TRACE(bh, "already cleaned up");
-			put_bh(bh);
+			release_data_buffer(bh);
 			continue;
 		}
 		if (locked && test_clear_buffer_dirty(bh)) {
@@ -253,15 +267,17 @@ write_out_data:
 			put_bh(bh);
 		} else {
 			BUFFER_TRACE(bh, "writeout complete: unfile");
+			if (unlikely(!buffer_uptodate(bh)))
+				err = -EIO;
 			__journal_unfile_buffer(jh);
 			jbd_unlock_bh_state(bh);
 			if (locked)
 				unlock_buffer(bh);
 			journal_remove_journal_head(bh);
-			/* Once for our safety reference, once for
+			/* One for our safety reference, other for
 			 * journal_remove_journal_head() */
 			put_bh(bh);
-			put_bh(bh);
+			release_data_buffer(bh);
 		}
 
 		if (need_resched() || spin_needbreak(&journal->j_list_lock)) {
@@ -271,6 +287,8 @@ write_out_data:
 	}
 	spin_unlock(&journal->j_list_lock);
 	journal_do_submit_data(wbuf, bufs);
+
+	return err;
 }
 
 /*
@@ -410,8 +428,7 @@ void journal_commit_transaction(journal_t *journal)
 	 * Now start flushing things to disk, in the order they appear
 	 * on the transaction lists.  Data blocks go first.
 	 */
-	err = 0;
-	journal_submit_data_buffers(journal, commit_transaction);
+	err = journal_submit_data_buffers(journal, commit_transaction);
 
 	/*
 	 * Wait for all previously submitted IO to complete.
@@ -426,10 +443,21 @@ void journal_commit_transaction(journal_t *journal)
 		if (buffer_locked(bh)) {
 			spin_unlock(&journal->j_list_lock);
 			wait_on_buffer(bh);
-			if (unlikely(!buffer_uptodate(bh)))
-				err = -EIO;
 			spin_lock(&journal->j_list_lock);
 		}
+		if (unlikely(!buffer_uptodate(bh))) {
+			if (!trylock_page(bh->b_page)) {
+				spin_unlock(&journal->j_list_lock);
+				lock_page(bh->b_page);
+				spin_lock(&journal->j_list_lock);
+			}
+			if (bh->b_page->mapping)
+				set_bit(AS_EIO, &bh->b_page->mapping->flags);
+
+			unlock_page(bh->b_page);
+			SetPageError(bh->b_page);
+			err = -EIO;
+		}
 		if (!inverted_lock(journal, bh)) {
 			put_bh(bh);
 			spin_lock(&journal->j_list_lock);
@@ -443,17 +471,21 @@ void journal_commit_transaction(journal_t *journal)
 		} else {
 			jbd_unlock_bh_state(bh);
 		}
-		put_bh(bh);
+		release_data_buffer(bh);
 		cond_resched_lock(&journal->j_list_lock);
 	}
 	spin_unlock(&journal->j_list_lock);
 
-	if (err)
-		journal_abort(journal, err);
+	if (err) {
+		char b[BDEVNAME_SIZE];
 
-	journal_write_revoke_records(journal, commit_transaction);
+		printk(KERN_WARNING
+			"JBD: Detected IO errors while flushing file data "
+			"on %s\n", bdevname(journal->j_fs_dev, b));
+		err = 0;
+	}
 
-	jbd_debug(3, "JBD: commit phase 2\n");
+	journal_write_revoke_records(journal, commit_transaction);
 
 	/*
 	 * If we found any dirty or locked buffers, then we should have
diff --git a/fs/jbd/journal.c b/fs/jbd/journal.c
index b99c3b3654c4..aa7143a8349b 100644
--- a/fs/jbd/journal.c
+++ b/fs/jbd/journal.c
@@ -68,7 +68,6 @@ EXPORT_SYMBOL(journal_set_features);
 EXPORT_SYMBOL(journal_create);
 EXPORT_SYMBOL(journal_load);
 EXPORT_SYMBOL(journal_destroy);
-EXPORT_SYMBOL(journal_update_superblock);
 EXPORT_SYMBOL(journal_abort);
 EXPORT_SYMBOL(journal_errno);
 EXPORT_SYMBOL(journal_ack_err);
@@ -1636,9 +1635,10 @@ static int journal_init_journal_head_cache(void)
 
 static void journal_destroy_journal_head_cache(void)
 {
-	J_ASSERT(journal_head_cache != NULL);
-	kmem_cache_destroy(journal_head_cache);
-	journal_head_cache = NULL;
+	if (journal_head_cache) {
+		kmem_cache_destroy(journal_head_cache);
+		journal_head_cache = NULL;
+	}
 }
 
 /*
diff --git a/fs/jbd/revoke.c b/fs/jbd/revoke.c
index 1bb43e987f4b..c7bd649bbbdc 100644
--- a/fs/jbd/revoke.c
+++ b/fs/jbd/revoke.c
@@ -166,138 +166,123 @@ static struct jbd_revoke_record_s *find_revoke_record(journal_t *journal,
 	return NULL;
 }
 
+void journal_destroy_revoke_caches(void)
+{
+	if (revoke_record_cache) {
+		kmem_cache_destroy(revoke_record_cache);
+		revoke_record_cache = NULL;
+	}
+	if (revoke_table_cache) {
+		kmem_cache_destroy(revoke_table_cache);
+		revoke_table_cache = NULL;
+	}
+}
+
 int __init journal_init_revoke_caches(void)
 {
+	J_ASSERT(!revoke_record_cache);
+	J_ASSERT(!revoke_table_cache);
+
 	revoke_record_cache = kmem_cache_create("revoke_record",
 					   sizeof(struct jbd_revoke_record_s),
 					   0,
 					   SLAB_HWCACHE_ALIGN|SLAB_TEMPORARY,
 					   NULL);
 	if (!revoke_record_cache)
-		return -ENOMEM;
+		goto record_cache_failure;
 
 	revoke_table_cache = kmem_cache_create("revoke_table",
 					   sizeof(struct jbd_revoke_table_s),
 					   0, SLAB_TEMPORARY, NULL);
-	if (!revoke_table_cache) {
-		kmem_cache_destroy(revoke_record_cache);
-		revoke_record_cache = NULL;
-		return -ENOMEM;
-	}
+	if (!revoke_table_cache)
+		goto table_cache_failure;
+
 	return 0;
-}
 
-void journal_destroy_revoke_caches(void)
-{
-	kmem_cache_destroy(revoke_record_cache);
-	revoke_record_cache = NULL;
-	kmem_cache_destroy(revoke_table_cache);
-	revoke_table_cache = NULL;
+table_cache_failure:
+	journal_destroy_revoke_caches();
+record_cache_failure:
+	return -ENOMEM;
 }
 
-/* Initialise the revoke table for a given journal to a given size. */
-
-int journal_init_revoke(journal_t *journal, int hash_size)
+static struct jbd_revoke_table_s *journal_init_revoke_table(int hash_size)
 {
-	int shift, tmp;
+	int shift = 0;
+	int tmp = hash_size;
+	struct jbd_revoke_table_s *table;
 
-	J_ASSERT (journal->j_revoke_table[0] == NULL);
+	table = kmem_cache_alloc(revoke_table_cache, GFP_KERNEL);
+	if (!table)
+		goto out;
 
-	shift = 0;
-	tmp = hash_size;
 	while((tmp >>= 1UL) != 0UL)
 		shift++;
 
-	journal->j_revoke_table[0] = kmem_cache_alloc(revoke_table_cache, GFP_KERNEL);
-	if (!journal->j_revoke_table[0])
-		return -ENOMEM;
-	journal->j_revoke = journal->j_revoke_table[0];
-
-	/* Check that the hash_size is a power of two */
-	J_ASSERT(is_power_of_2(hash_size));
-
-	journal->j_revoke->hash_size = hash_size;
-
-	journal->j_revoke->hash_shift = shift;
-
-	journal->j_revoke->hash_table =
+	table->hash_size = hash_size;
+	table->hash_shift = shift;
+	table->hash_table =
 		kmalloc(hash_size * sizeof(struct list_head), GFP_KERNEL);
-	if (!journal->j_revoke->hash_table) {
-		kmem_cache_free(revoke_table_cache, journal->j_revoke_table[0]);
-		journal->j_revoke = NULL;
-		return -ENOMEM;
+	if (!table->hash_table) {
+		kmem_cache_free(revoke_table_cache, table);
+		table = NULL;
+		goto out;
 	}
 
 	for (tmp = 0; tmp < hash_size; tmp++)
-		INIT_LIST_HEAD(&journal->j_revoke->hash_table[tmp]);
+		INIT_LIST_HEAD(&table->hash_table[tmp]);
 
-	journal->j_revoke_table[1] = kmem_cache_alloc(revoke_table_cache, GFP_KERNEL);
-	if (!journal->j_revoke_table[1]) {
-		kfree(journal->j_revoke_table[0]->hash_table);
-		kmem_cache_free(revoke_table_cache, journal->j_revoke_table[0]);
-		return -ENOMEM;
+out:
+	return table;
+}
+
+static void journal_destroy_revoke_table(struct jbd_revoke_table_s *table)
+{
+	int i;
+	struct list_head *hash_list;
+
+	for (i = 0; i < table->hash_size; i++) {
+		hash_list = &table->hash_table[i];
+		J_ASSERT(list_empty(hash_list));
 	}
 
-	journal->j_revoke = journal->j_revoke_table[1];
+	kfree(table->hash_table);
+	kmem_cache_free(revoke_table_cache, table);
+}
 
-	/* Check that the hash_size is a power of two */
+/* Initialise the revoke table for a given journal to a given size. */
+int journal_init_revoke(journal_t *journal, int hash_size)
+{
+	J_ASSERT(journal->j_revoke_table[0] == NULL);
 	J_ASSERT(is_power_of_2(hash_size));
 
-	journal->j_revoke->hash_size = hash_size;
+	journal->j_revoke_table[0] = journal_init_revoke_table(hash_size);
+	if (!journal->j_revoke_table[0])
+		goto fail0;
 
-	journal->j_revoke->hash_shift = shift;
+	journal->j_revoke_table[1] = journal_init_revoke_table(hash_size);
+	if (!journal->j_revoke_table[1])
+		goto fail1;
 
-	journal->j_revoke->hash_table =
-		kmalloc(hash_size * sizeof(struct list_head), GFP_KERNEL);
-	if (!journal->j_revoke->hash_table) {
-		kfree(journal->j_revoke_table[0]->hash_table);
-		kmem_cache_free(revoke_table_cache, journal->j_revoke_table[0]);
-		kmem_cache_free(revoke_table_cache, journal->j_revoke_table[1]);
-		journal->j_revoke = NULL;
-		return -ENOMEM;
-	}
-
-	for (tmp = 0; tmp < hash_size; tmp++)
-		INIT_LIST_HEAD(&journal->j_revoke->hash_table[tmp]);
+	journal->j_revoke = journal->j_revoke_table[1];
 
 	spin_lock_init(&journal->j_revoke_lock);
 
 	return 0;
-}
 
-/* Destoy a journal's revoke table.  The table must already be empty! */
+fail1:
+	journal_destroy_revoke_table(journal->j_revoke_table[0]);
+fail0:
+	return -ENOMEM;
+}
 
+/* Destroy a journal's revoke table.  The table must already be empty! */
 void journal_destroy_revoke(journal_t *journal)
 {
-	struct jbd_revoke_table_s *table;
-	struct list_head *hash_list;
-	int i;
-
-	table = journal->j_revoke_table[0];
-	if (!table)
-		return;
-
-	for (i=0; i<table->hash_size; i++) {
-		hash_list = &table->hash_table[i];
-		J_ASSERT (list_empty(hash_list));
-	}
-
-	kfree(table->hash_table);
-	kmem_cache_free(revoke_table_cache, table);
-	journal->j_revoke = NULL;
-
-	table = journal->j_revoke_table[1];
-	if (!table)
-		return;
-
-	for (i=0; i<table->hash_size; i++) {
-		hash_list = &table->hash_table[i];
-		J_ASSERT (list_empty(hash_list));
-	}
-
-	kfree(table->hash_table);
-	kmem_cache_free(revoke_table_cache, table);
 	journal->j_revoke = NULL;
+	if (journal->j_revoke_table[0])
+		journal_destroy_revoke_table(journal->j_revoke_table[0]);
+	if (journal->j_revoke_table[1])
+		journal_destroy_revoke_table(journal->j_revoke_table[1]);
 }
 
 
diff --git a/fs/jbd/transaction.c b/fs/jbd/transaction.c
index 67ff2024c23c..0540ca27a446 100644
--- a/fs/jbd/transaction.c
+++ b/fs/jbd/transaction.c
@@ -291,7 +291,7 @@ handle_t *journal_start(journal_t *journal, int nblocks)
 		goto out;
 	}
 
-	lock_acquire(&handle->h_lockdep_map, 0, 0, 0, 2, _THIS_IP_);
+	lock_map_acquire(&handle->h_lockdep_map);
 
 out:
 	return handle;
@@ -1448,7 +1448,7 @@ int journal_stop(handle_t *handle)
 		spin_unlock(&journal->j_state_lock);
 	}
 
-	lock_release(&handle->h_lockdep_map, 1, _THIS_IP_);
+	lock_map_release(&handle->h_lockdep_map);
 
 	jbd_free_handle(handle);
 	return err;
@@ -1648,12 +1648,42 @@ out:
 	return;
 }
 
+/*
+ * journal_try_to_free_buffers() could race with journal_commit_transaction()
+ * The latter might still hold the a count on buffers when inspecting
+ * them on t_syncdata_list or t_locked_list.
+ *
+ * journal_try_to_free_buffers() will call this function to
+ * wait for the current transaction to finish syncing data buffers, before
+ * tryinf to free that buffer.
+ *
+ * Called with journal->j_state_lock held.
+ */
+static void journal_wait_for_transaction_sync_data(journal_t *journal)
+{
+	transaction_t *transaction = NULL;
+	tid_t tid;
+
+	spin_lock(&journal->j_state_lock);
+	transaction = journal->j_committing_transaction;
+
+	if (!transaction) {
+		spin_unlock(&journal->j_state_lock);
+		return;
+	}
+
+	tid = transaction->t_tid;
+	spin_unlock(&journal->j_state_lock);
+	log_wait_commit(journal, tid);
+}
 
 /**
  * int journal_try_to_free_buffers() - try to free page buffers.
  * @journal: journal for operation
  * @page: to try and free
- * @unused_gfp_mask: unused
+ * @gfp_mask: we use the mask to detect how hard should we try to release
+ * buffers. If __GFP_WAIT and __GFP_FS is set, we wait for commit code to
+ * release the buffers.
  *
  *
  * For all the buffers on this page,
@@ -1682,9 +1712,11 @@ out:
  * journal_try_to_free_buffer() is changing its state.  But that
  * cannot happen because we never reallocate freed data as metadata
  * while the data is part of a transaction.  Yes?
+ *
+ * Return 0 on failure, 1 on success
  */
 int journal_try_to_free_buffers(journal_t *journal,
-				struct page *page, gfp_t unused_gfp_mask)
+				struct page *page, gfp_t gfp_mask)
 {
 	struct buffer_head *head;
 	struct buffer_head *bh;
@@ -1713,7 +1745,28 @@ int journal_try_to_free_buffers(journal_t *journal,
 		if (buffer_jbd(bh))
 			goto busy;
 	} while ((bh = bh->b_this_page) != head);
+
 	ret = try_to_free_buffers(page);
+
+	/*
+	 * There are a number of places where journal_try_to_free_buffers()
+	 * could race with journal_commit_transaction(), the later still
+	 * holds the reference to the buffers to free while processing them.
+	 * try_to_free_buffers() failed to free those buffers. Some of the
+	 * caller of releasepage() request page buffers to be dropped, otherwise
+	 * treat the fail-to-free as errors (such as generic_file_direct_IO())
+	 *
+	 * So, if the caller of try_to_release_page() wants the synchronous
+	 * behaviour(i.e make sure buffers are dropped upon return),
+	 * let's wait for the current transaction to finish flush of
+	 * dirty data buffers, then try to free those buffers again,
+	 * with the journal locked.
+	 */
+	if (ret == 0 && (gfp_mask & __GFP_WAIT) && (gfp_mask & __GFP_FS)) {
+		journal_wait_for_transaction_sync_data(journal);
+		ret = try_to_free_buffers(page);
+	}
+
 busy:
 	return ret;
 }
diff --git a/fs/jbd2/commit.c b/fs/jbd2/commit.c
index f8b3be873226..f2ad061e95ec 100644
--- a/fs/jbd2/commit.c
+++ b/fs/jbd2/commit.c
@@ -67,7 +67,7 @@ static void release_buffer_page(struct buffer_head *bh)
 		goto nope;
 
 	/* OK, it's a truncated page */
-	if (TestSetPageLocked(page))
+	if (!trylock_page(page))
 		goto nope;
 
 	page_cache_get(page);
@@ -262,8 +262,18 @@ static int journal_finish_inode_data_buffers(journal_t *journal,
 		jinode->i_flags |= JI_COMMIT_RUNNING;
 		spin_unlock(&journal->j_list_lock);
 		err = filemap_fdatawait(jinode->i_vfs_inode->i_mapping);
-		if (!ret)
-			ret = err;
+		if (err) {
+			/*
+			 * Because AS_EIO is cleared by
+			 * wait_on_page_writeback_range(), set it again so
+			 * that user process can get -EIO from fsync().
+			 */
+			set_bit(AS_EIO,
+				&jinode->i_vfs_inode->i_mapping->flags);
+
+			if (!ret)
+				ret = err;
+		}
 		spin_lock(&journal->j_list_lock);
 		jinode->i_flags &= ~JI_COMMIT_RUNNING;
 		wake_up_bit(&jinode->i_flags, __JI_COMMIT_RUNNING);
@@ -670,8 +680,14 @@ start_journal_io:
 	 * commit block, which happens below in such setting.
 	 */
 	err = journal_finish_inode_data_buffers(journal, commit_transaction);
-	if (err)
-		jbd2_journal_abort(journal, err);
+	if (err) {
+		char b[BDEVNAME_SIZE];
+
+		printk(KERN_WARNING
+			"JBD2: Detected IO errors while flushing file data "
+			"on %s\n", bdevname(journal->j_fs_dev, b));
+		err = 0;
+	}
 
 	/* Lo and behold: we have just managed to send a transaction to
            the log.  Before we can commit it, wait for the IO so far to
diff --git a/fs/jbd2/journal.c b/fs/jbd2/journal.c
index b26c6d9fe6ae..8207a01c4edb 100644
--- a/fs/jbd2/journal.c
+++ b/fs/jbd2/journal.c
@@ -68,7 +68,6 @@ EXPORT_SYMBOL(jbd2_journal_set_features);
 EXPORT_SYMBOL(jbd2_journal_create);
 EXPORT_SYMBOL(jbd2_journal_load);
 EXPORT_SYMBOL(jbd2_journal_destroy);
-EXPORT_SYMBOL(jbd2_journal_update_superblock);
 EXPORT_SYMBOL(jbd2_journal_abort);
 EXPORT_SYMBOL(jbd2_journal_errno);
 EXPORT_SYMBOL(jbd2_journal_ack_err);
diff --git a/fs/jbd2/transaction.c b/fs/jbd2/transaction.c
index 4f7cadbb19fa..e5d540588fa9 100644
--- a/fs/jbd2/transaction.c
+++ b/fs/jbd2/transaction.c
@@ -301,7 +301,7 @@ handle_t *jbd2_journal_start(journal_t *journal, int nblocks)
 		goto out;
 	}
 
-	lock_acquire(&handle->h_lockdep_map, 0, 0, 0, 2, _THIS_IP_);
+	lock_map_acquire(&handle->h_lockdep_map);
 out:
 	return handle;
 }
@@ -1279,7 +1279,7 @@ int jbd2_journal_stop(handle_t *handle)
 		spin_unlock(&journal->j_state_lock);
 	}
 
-	lock_release(&handle->h_lockdep_map, 1, _THIS_IP_);
+	lock_map_release(&handle->h_lockdep_map);
 
 	jbd2_free_handle(handle);
 	return err;
diff --git a/fs/jffs2/acl.c b/fs/jffs2/acl.c
index 4c80404a9aba..d98713777a1b 100644
--- a/fs/jffs2/acl.c
+++ b/fs/jffs2/acl.c
@@ -314,7 +314,7 @@ static int jffs2_check_acl(struct inode *inode, int mask)
 	return -EAGAIN;
 }
 
-int jffs2_permission(struct inode *inode, int mask, struct nameidata *nd)
+int jffs2_permission(struct inode *inode, int mask)
 {
 	return generic_permission(inode, mask, jffs2_check_acl);
 }
diff --git a/fs/jffs2/acl.h b/fs/jffs2/acl.h
index 0bb7f003fd80..8ca058aed384 100644
--- a/fs/jffs2/acl.h
+++ b/fs/jffs2/acl.h
@@ -28,7 +28,7 @@ struct jffs2_acl_header {
 
 #define JFFS2_ACL_NOT_CACHED ((void *)-1)
 
-extern int jffs2_permission(struct inode *, int, struct nameidata *);
+extern int jffs2_permission(struct inode *, int);
 extern int jffs2_acl_chmod(struct inode *);
 extern int jffs2_init_acl_pre(struct inode *, struct inode *, int *);
 extern int jffs2_init_acl_post(struct inode *);
diff --git a/fs/jffs2/dir.c b/fs/jffs2/dir.c
index c0c141f6fde1..cd219ef55254 100644
--- a/fs/jffs2/dir.c
+++ b/fs/jffs2/dir.c
@@ -38,7 +38,7 @@ const struct file_operations jffs2_dir_operations =
 {
 	.read =		generic_read_dir,
 	.readdir =	jffs2_readdir,
-	.ioctl =	jffs2_ioctl,
+	.unlocked_ioctl=jffs2_ioctl,
 	.fsync =	jffs2_fsync
 };
 
diff --git a/fs/jffs2/file.c b/fs/jffs2/file.c
index 5e920343b2c5..5a98aa87c853 100644
--- a/fs/jffs2/file.c
+++ b/fs/jffs2/file.c
@@ -46,7 +46,7 @@ const struct file_operations jffs2_file_operations =
  	.aio_read =	generic_file_aio_read,
  	.write =	do_sync_write,
  	.aio_write =	generic_file_aio_write,
-	.ioctl =	jffs2_ioctl,
+	.unlocked_ioctl=jffs2_ioctl,
 	.mmap =		generic_file_readonly_mmap,
 	.fsync =	jffs2_fsync,
 	.splice_read =	generic_file_splice_read,
diff --git a/fs/jffs2/ioctl.c b/fs/jffs2/ioctl.c
index e2177210f621..9d41f43e47bb 100644
--- a/fs/jffs2/ioctl.c
+++ b/fs/jffs2/ioctl.c
@@ -12,8 +12,7 @@
 #include <linux/fs.h>
 #include "nodelist.h"
 
-int jffs2_ioctl(struct inode *inode, struct file *filp, unsigned int cmd,
-		unsigned long arg)
+long jffs2_ioctl(struct file *filp, unsigned int cmd, unsigned long arg)
 {
 	/* Later, this will provide for lsattr.jffs2 and chattr.jffs2, which
 	   will include compression support etc. */
diff --git a/fs/jffs2/jffs2_fs_i.h b/fs/jffs2/jffs2_fs_i.h
index 31559f45fdde..4c41db91eaa4 100644
--- a/fs/jffs2/jffs2_fs_i.h
+++ b/fs/jffs2/jffs2_fs_i.h
@@ -12,7 +12,6 @@
 #ifndef _JFFS2_FS_I
 #define _JFFS2_FS_I
 
-#include <linux/version.h>
 #include <linux/rbtree.h>
 #include <linux/posix_acl.h>
 #include <linux/mutex.h>
diff --git a/fs/jffs2/os-linux.h b/fs/jffs2/os-linux.h
index 2cc866cf134f..5e194a5c8e29 100644
--- a/fs/jffs2/os-linux.h
+++ b/fs/jffs2/os-linux.h
@@ -167,7 +167,7 @@ int jffs2_fsync(struct file *, struct dentry *, int);
 int jffs2_do_readpage_unlock (struct inode *inode, struct page *pg);
 
 /* ioctl.c */
-int jffs2_ioctl(struct inode *, struct file *, unsigned int, unsigned long);
+long jffs2_ioctl(struct file *, unsigned int, unsigned long);
 
 /* symlink.c */
 extern const struct inode_operations jffs2_symlink_inode_operations;
diff --git a/fs/jffs2/summary.c b/fs/jffs2/summary.c
index 629af01e5ade..6caf1e1ee26d 100644
--- a/fs/jffs2/summary.c
+++ b/fs/jffs2/summary.c
@@ -23,6 +23,8 @@
 
 int jffs2_sum_init(struct jffs2_sb_info *c)
 {
+	uint32_t sum_size = max_t(uint32_t, c->sector_size, MAX_SUMMARY_SIZE);
+
 	c->summary = kzalloc(sizeof(struct jffs2_summary), GFP_KERNEL);
 
 	if (!c->summary) {
@@ -30,7 +32,7 @@ int jffs2_sum_init(struct jffs2_sb_info *c)
 		return -ENOMEM;
 	}
 
-	c->summary->sum_buf = vmalloc(c->sector_size);
+	c->summary->sum_buf = kmalloc(sum_size, GFP_KERNEL);
 
 	if (!c->summary->sum_buf) {
 		JFFS2_WARNING("Can't allocate buffer for writing out summary information!\n");
@@ -49,7 +51,7 @@ void jffs2_sum_exit(struct jffs2_sb_info *c)
 
 	jffs2_sum_disable_collecting(c->summary);
 
-	vfree(c->summary->sum_buf);
+	kfree(c->summary->sum_buf);
 	c->summary->sum_buf = NULL;
 
 	kfree(c->summary);
@@ -665,7 +667,7 @@ crc_err:
 /* Write summary data to flash - helper function for jffs2_sum_write_sumnode() */
 
 static int jffs2_sum_write_data(struct jffs2_sb_info *c, struct jffs2_eraseblock *jeb,
-					uint32_t infosize, uint32_t datasize, int padsize)
+				uint32_t infosize, uint32_t datasize, int padsize)
 {
 	struct jffs2_raw_summary isum;
 	union jffs2_sum_mem *temp;
@@ -676,6 +678,26 @@ static int jffs2_sum_write_data(struct jffs2_sb_info *c, struct jffs2_eraseblock
 	int ret;
 	size_t retlen;
 
+	if (padsize + datasize > MAX_SUMMARY_SIZE) {
+		/* It won't fit in the buffer. Abort summary for this jeb */
+		jffs2_sum_disable_collecting(c->summary);
+
+		JFFS2_WARNING("Summary too big (%d data, %d pad) in eraseblock at %08x\n",
+			      datasize, padsize, jeb->offset);
+		/* Non-fatal */
+		return 0;
+	}
+	/* Is there enough space for summary? */
+	if (padsize < 0) {
+		/* don't try to write out summary for this jeb */
+		jffs2_sum_disable_collecting(c->summary);
+
+		JFFS2_WARNING("Not enough space for summary, padsize = %d\n",
+			      padsize);
+		/* Non-fatal */
+		return 0;
+	}
+
 	memset(c->summary->sum_buf, 0xff, datasize);
 	memset(&isum, 0, sizeof(isum));
 
@@ -821,7 +843,7 @@ int jffs2_sum_write_sumnode(struct jffs2_sb_info *c)
 {
 	int datasize, infosize, padsize;
 	struct jffs2_eraseblock *jeb;
-	int ret;
+	int ret = 0;
 
 	dbg_summary("called\n");
 
@@ -841,16 +863,6 @@ int jffs2_sum_write_sumnode(struct jffs2_sb_info *c)
 	infosize += padsize;
 	datasize += padsize;
 
-	/* Is there enough space for summary? */
-	if (padsize < 0) {
-		/* don't try to write out summary for this jeb */
-		jffs2_sum_disable_collecting(c->summary);
-
-		JFFS2_WARNING("Not enough space for summary, padsize = %d\n", padsize);
-		spin_lock(&c->erase_completion_lock);
-		return 0;
-	}
-
 	ret = jffs2_sum_write_data(c, jeb, infosize, datasize, padsize);
 	spin_lock(&c->erase_completion_lock);
 	return ret;
diff --git a/fs/jffs2/summary.h b/fs/jffs2/summary.h
index 8bf34f2fa5ce..60207a2ae952 100644
--- a/fs/jffs2/summary.h
+++ b/fs/jffs2/summary.h
@@ -13,6 +13,12 @@
 #ifndef JFFS2_SUMMARY_H
 #define JFFS2_SUMMARY_H
 
+/* Limit summary size to 64KiB so that we can kmalloc it. If the summary
+   is larger than that, we have to just ditch it and avoid using summary
+   for the eraseblock in question... and it probably doesn't hurt us much
+   anyway. */
+#define MAX_SUMMARY_SIZE 65536
+
 #include <linux/uio.h>
 #include <linux/jffs2.h>
 
diff --git a/fs/jffs2/super.c b/fs/jffs2/super.c
index 7da69eae49e4..efd401257ed9 100644
--- a/fs/jffs2/super.c
+++ b/fs/jffs2/super.c
@@ -44,7 +44,7 @@ static void jffs2_destroy_inode(struct inode *inode)
 	kmem_cache_free(jffs2_inode_cachep, JFFS2_INODE_INFO(inode));
 }
 
-static void jffs2_i_init_once(struct kmem_cache *cachep, void *foo)
+static void jffs2_i_init_once(void *foo)
 {
 	struct jffs2_inode_info *f = foo;
 
diff --git a/fs/jfs/acl.c b/fs/jfs/acl.c
index 4d84bdc88299..d3e5c33665de 100644
--- a/fs/jfs/acl.c
+++ b/fs/jfs/acl.c
@@ -140,7 +140,7 @@ static int jfs_check_acl(struct inode *inode, int mask)
 	return -EAGAIN;
 }
 
-int jfs_permission(struct inode *inode, int mask, struct nameidata *nd)
+int jfs_permission(struct inode *inode, int mask)
 {
 	return generic_permission(inode, mask, jfs_check_acl);
 }
diff --git a/fs/jfs/jfs_acl.h b/fs/jfs/jfs_acl.h
index 455fa4292045..88475f10a389 100644
--- a/fs/jfs/jfs_acl.h
+++ b/fs/jfs/jfs_acl.h
@@ -20,7 +20,7 @@
 
 #ifdef CONFIG_JFS_POSIX_ACL
 
-int jfs_permission(struct inode *, int, struct nameidata *);
+int jfs_permission(struct inode *, int);
 int jfs_init_acl(tid_t, struct inode *, struct inode *);
 int jfs_setattr(struct dentry *, struct iattr *);
 
diff --git a/fs/jfs/jfs_metapage.c b/fs/jfs/jfs_metapage.c
index 854ff0ec574f..c350057087dd 100644
--- a/fs/jfs/jfs_metapage.c
+++ b/fs/jfs/jfs_metapage.c
@@ -182,7 +182,7 @@ static inline void remove_metapage(struct page *page, struct metapage *mp)
 
 #endif
 
-static void init_once(struct kmem_cache *cachep, void *foo)
+static void init_once(void *foo)
 {
 	struct metapage *mp = (struct metapage *)foo;
 
diff --git a/fs/jfs/super.c b/fs/jfs/super.c
index 0288e6d7936a..3630718be395 100644
--- a/fs/jfs/super.c
+++ b/fs/jfs/super.c
@@ -22,6 +22,7 @@
 #include <linux/parser.h>
 #include <linux/completion.h>
 #include <linux/vfs.h>
+#include <linux/quotaops.h>
 #include <linux/mount.h>
 #include <linux/moduleparam.h>
 #include <linux/kthread.h>
@@ -759,7 +760,7 @@ static struct file_system_type jfs_fs_type = {
 	.fs_flags	= FS_REQUIRES_DEV,
 };
 
-static void init_once(struct kmem_cache *cachep, void *foo)
+static void init_once(void *foo)
 {
 	struct jfs_inode_info *jfs_ip = (struct jfs_inode_info *) foo;
 
diff --git a/fs/libfs.c b/fs/libfs.c
index baeb71ee1cde..1add676a19df 100644
--- a/fs/libfs.c
+++ b/fs/libfs.c
@@ -216,8 +216,8 @@ int get_sb_pseudo(struct file_system_type *fs_type, char *name,
 
 	s->s_flags = MS_NOUSER;
 	s->s_maxbytes = ~0ULL;
-	s->s_blocksize = 1024;
-	s->s_blocksize_bits = 10;
+	s->s_blocksize = PAGE_SIZE;
+	s->s_blocksize_bits = PAGE_SHIFT;
 	s->s_magic = magic;
 	s->s_op = ops ? ops : &simple_super_operations;
 	s->s_time_gran = 1;
diff --git a/fs/lockd/clntproc.c b/fs/lockd/clntproc.c
index 1f6dc518505c..31668b690e03 100644
--- a/fs/lockd/clntproc.c
+++ b/fs/lockd/clntproc.c
@@ -582,7 +582,15 @@ again:
 	}
 	if (status < 0)
 		goto out_unlock;
-	status = nlm_stat_to_errno(resp->status);
+	/*
+	 * EAGAIN doesn't make sense for sleeping locks, and in some
+	 * cases NLM_LCK_DENIED is returned for a permanent error.  So
+	 * turn it into an ENOLCK.
+	 */
+	if (resp->status == nlm_lck_denied && (fl_flags & FL_SLEEP))
+		status = -ENOLCK;
+	else
+		status = nlm_stat_to_errno(resp->status);
 out_unblock:
 	nlmclnt_finish_block(block);
 out:
diff --git a/fs/lockd/svc4proc.c b/fs/lockd/svc4proc.c
index 399444639337..4a714f64515b 100644
--- a/fs/lockd/svc4proc.c
+++ b/fs/lockd/svc4proc.c
@@ -83,7 +83,7 @@ nlm4svc_proc_test(struct svc_rqst *rqstp, struct nlm_args *argp,
 {
 	struct nlm_host	*host;
 	struct nlm_file	*file;
-	int rc = rpc_success;
+	__be32 rc = rpc_success;
 
 	dprintk("lockd: TEST4        called\n");
 	resp->cookie = argp->cookie;
@@ -116,7 +116,7 @@ nlm4svc_proc_lock(struct svc_rqst *rqstp, struct nlm_args *argp,
 {
 	struct nlm_host	*host;
 	struct nlm_file	*file;
-	int rc = rpc_success;
+	__be32 rc = rpc_success;
 
 	dprintk("lockd: LOCK          called\n");
 
diff --git a/fs/lockd/svclock.c b/fs/lockd/svclock.c
index 821b9acdfb66..cf0d5c2c318d 100644
--- a/fs/lockd/svclock.c
+++ b/fs/lockd/svclock.c
@@ -418,8 +418,8 @@ nlmsvc_lock(struct svc_rqst *rqstp, struct nlm_file *file,
 			goto out;
 		case -EAGAIN:
 			ret = nlm_lck_denied;
-			break;
-		case -EINPROGRESS:
+			goto out;
+		case FILE_LOCK_DEFERRED:
 			if (wait)
 				break;
 			/* Filesystem lock operation is in progress
@@ -434,10 +434,6 @@ nlmsvc_lock(struct svc_rqst *rqstp, struct nlm_file *file,
 			goto out;
 	}
 
-	ret = nlm_lck_denied;
-	if (!wait)
-		goto out;
-
 	ret = nlm_lck_blocked;
 
 	/* Append to list of blocked */
@@ -507,7 +503,7 @@ nlmsvc_testlock(struct svc_rqst *rqstp, struct nlm_file *file,
 	}
 
 	error = vfs_test_lock(file->f_file, &lock->fl);
-	if (error == -EINPROGRESS) {
+	if (error == FILE_LOCK_DEFERRED) {
 		ret = nlmsvc_defer_lock_rqst(rqstp, block);
 		goto out;
 	}
@@ -731,8 +727,7 @@ nlmsvc_grant_blocked(struct nlm_block *block)
 	switch (error) {
 	case 0:
 		break;
-	case -EAGAIN:
-	case -EINPROGRESS:
+	case FILE_LOCK_DEFERRED:
 		dprintk("lockd: lock still blocked error %d\n", error);
 		nlmsvc_insert_block(block, NLM_NEVER);
 		nlmsvc_release_block(block);
diff --git a/fs/lockd/svcproc.c b/fs/lockd/svcproc.c
index 76019d2ff72d..76262c1986f2 100644
--- a/fs/lockd/svcproc.c
+++ b/fs/lockd/svcproc.c
@@ -112,7 +112,7 @@ nlmsvc_proc_test(struct svc_rqst *rqstp, struct nlm_args *argp,
 {
 	struct nlm_host	*host;
 	struct nlm_file	*file;
-	int rc = rpc_success;
+	__be32 rc = rpc_success;
 
 	dprintk("lockd: TEST          called\n");
 	resp->cookie = argp->cookie;
@@ -146,7 +146,7 @@ nlmsvc_proc_lock(struct svc_rqst *rqstp, struct nlm_args *argp,
 {
 	struct nlm_host	*host;
 	struct nlm_file	*file;
-	int rc = rpc_success;
+	__be32 rc = rpc_success;
 
 	dprintk("lockd: LOCK          called\n");
 
diff --git a/fs/locks.c b/fs/locks.c
index dce8c747371c..5eb259e3cd38 100644
--- a/fs/locks.c
+++ b/fs/locks.c
@@ -201,7 +201,7 @@ EXPORT_SYMBOL(locks_init_lock);
  * Initialises the fields of the file lock which are invariant for
  * free file_locks.
  */
-static void init_once(struct kmem_cache *cache, void *foo)
+static void init_once(void *foo)
 {
 	struct file_lock *lock = (struct file_lock *) foo;
 
@@ -779,8 +779,10 @@ find_conflict:
 		if (!flock_locks_conflict(request, fl))
 			continue;
 		error = -EAGAIN;
-		if (request->fl_flags & FL_SLEEP)
-			locks_insert_block(fl, request);
+		if (!(request->fl_flags & FL_SLEEP))
+			goto out;
+		error = FILE_LOCK_DEFERRED;
+		locks_insert_block(fl, request);
 		goto out;
 	}
 	if (request->fl_flags & FL_ACCESS)
@@ -836,7 +838,7 @@ static int __posix_lock_file(struct inode *inode, struct file_lock *request, str
 			error = -EDEADLK;
 			if (posix_locks_deadlock(request, fl))
 				goto out;
-			error = -EAGAIN;
+			error = FILE_LOCK_DEFERRED;
 			locks_insert_block(fl, request);
 			goto out;
   		}
@@ -1035,7 +1037,7 @@ int posix_lock_file_wait(struct file *filp, struct file_lock *fl)
 	might_sleep ();
 	for (;;) {
 		error = posix_lock_file(filp, fl, NULL);
-		if ((error != -EAGAIN) || !(fl->fl_flags & FL_SLEEP))
+		if (error != FILE_LOCK_DEFERRED)
 			break;
 		error = wait_event_interruptible(fl->fl_wait, !fl->fl_next);
 		if (!error)
@@ -1107,9 +1109,7 @@ int locks_mandatory_area(int read_write, struct inode *inode,
 
 	for (;;) {
 		error = __posix_lock_file(inode, &fl, NULL);
-		if (error != -EAGAIN)
-			break;
-		if (!(fl.fl_flags & FL_SLEEP))
+		if (error != FILE_LOCK_DEFERRED)
 			break;
 		error = wait_event_interruptible(fl.fl_wait, !fl.fl_next);
 		if (!error) {
@@ -1531,7 +1531,7 @@ int flock_lock_file_wait(struct file *filp, struct file_lock *fl)
 	might_sleep();
 	for (;;) {
 		error = flock_lock_file(filp, fl);
-		if ((error != -EAGAIN) || !(fl->fl_flags & FL_SLEEP))
+		if (error != FILE_LOCK_DEFERRED)
 			break;
 		error = wait_event_interruptible(fl->fl_wait, !fl->fl_next);
 		if (!error)
@@ -1716,17 +1716,17 @@ out:
  * fl_grant is set. Callers expecting ->lock() to return asynchronously
  * will only use F_SETLK, not F_SETLKW; they will set FL_SLEEP if (and only if)
  * the request is for a blocking lock. When ->lock() does return asynchronously,
- * it must return -EINPROGRESS, and call ->fl_grant() when the lock
+ * it must return FILE_LOCK_DEFERRED, and call ->fl_grant() when the lock
  * request completes.
  * If the request is for non-blocking lock the file system should return
- * -EINPROGRESS then try to get the lock and call the callback routine with
- * the result. If the request timed out the callback routine will return a
+ * FILE_LOCK_DEFERRED then try to get the lock and call the callback routine
+ * with the result. If the request timed out the callback routine will return a
  * nonzero return code and the file system should release the lock. The file
  * system is also responsible to keep a corresponding posix lock when it
  * grants a lock so the VFS can find out which locks are locally held and do
  * the correct lock cleanup when required.
  * The underlying filesystem must not drop the kernel lock or call
- * ->fl_grant() before returning to the caller with a -EINPROGRESS
+ * ->fl_grant() before returning to the caller with a FILE_LOCK_DEFERRED
  * return code.
  */
 int vfs_lock_file(struct file *filp, unsigned int cmd, struct file_lock *fl, struct file_lock *conf)
@@ -1738,6 +1738,30 @@ int vfs_lock_file(struct file *filp, unsigned int cmd, struct file_lock *fl, str
 }
 EXPORT_SYMBOL_GPL(vfs_lock_file);
 
+static int do_lock_file_wait(struct file *filp, unsigned int cmd,
+			     struct file_lock *fl)
+{
+	int error;
+
+	error = security_file_lock(filp, fl->fl_type);
+	if (error)
+		return error;
+
+	for (;;) {
+		error = vfs_lock_file(filp, cmd, fl, NULL);
+		if (error != FILE_LOCK_DEFERRED)
+			break;
+		error = wait_event_interruptible(fl->fl_wait, !fl->fl_next);
+		if (!error)
+			continue;
+
+		locks_delete_block(fl);
+		break;
+	}
+
+	return error;
+}
+
 /* Apply the lock described by l to an open file descriptor.
  * This implements both the F_SETLK and F_SETLKW commands of fcntl().
  */
@@ -1795,26 +1819,7 @@ again:
 		goto out;
 	}
 
-	error = security_file_lock(filp, file_lock->fl_type);
-	if (error)
-		goto out;
-
-	if (filp->f_op && filp->f_op->lock != NULL)
-		error = filp->f_op->lock(filp, cmd, file_lock);
-	else {
-		for (;;) {
-			error = posix_lock_file(filp, file_lock, NULL);
-			if (error != -EAGAIN || cmd == F_SETLK)
-				break;
-			error = wait_event_interruptible(file_lock->fl_wait,
-					!file_lock->fl_next);
-			if (!error)
-				continue;
-
-			locks_delete_block(file_lock);
-			break;
-		}
-	}
+	error = do_lock_file_wait(filp, cmd, file_lock);
 
 	/*
 	 * Attempt to detect a close/fcntl race and recover by
@@ -1932,26 +1937,7 @@ again:
 		goto out;
 	}
 
-	error = security_file_lock(filp, file_lock->fl_type);
-	if (error)
-		goto out;
-
-	if (filp->f_op && filp->f_op->lock != NULL)
-		error = filp->f_op->lock(filp, cmd, file_lock);
-	else {
-		for (;;) {
-			error = posix_lock_file(filp, file_lock, NULL);
-			if (error != -EAGAIN || cmd == F_SETLK64)
-				break;
-			error = wait_event_interruptible(file_lock->fl_wait,
-					!file_lock->fl_next);
-			if (!error)
-				continue;
-
-			locks_delete_block(file_lock);
-			break;
-		}
-	}
+	error = do_lock_file_wait(filp, cmd, file_lock);
 
 	/*
 	 * Attempt to detect a close/fcntl race and recover by
diff --git a/fs/minix/inode.c b/fs/minix/inode.c
index 84f6242ba6fc..d1d1eb84679d 100644
--- a/fs/minix/inode.c
+++ b/fs/minix/inode.c
@@ -68,7 +68,7 @@ static void minix_destroy_inode(struct inode *inode)
 	kmem_cache_free(minix_inode_cachep, minix_i(inode));
 }
 
-static void init_once(struct kmem_cache * cachep, void *foo)
+static void init_once(void *foo)
 {
 	struct minix_inode_info *ei = (struct minix_inode_info *) foo;
 
@@ -256,9 +256,6 @@ static int minix_fill_super(struct super_block *s, void *data, int silent)
 	if (!s->s_root)
 		goto out_iput;
 
-	if (!NO_TRUNCATE)
-		s->s_root->d_op = &minix_dentry_operations;
-
 	if (!(s->s_flags & MS_RDONLY)) {
 		if (sbi->s_version != MINIX_V3) /* s_state is now out from V3 sb */
 			ms->s_state &= ~MINIX_VALID_FS;
diff --git a/fs/minix/minix.h b/fs/minix/minix.h
index 326edfe96108..e6a0b193bea4 100644
--- a/fs/minix/minix.h
+++ b/fs/minix/minix.h
@@ -2,11 +2,6 @@
 #include <linux/pagemap.h>
 #include <linux/minix_fs.h>
 
-/*
- * change the define below to 0 if you want names > info->s_namelen chars to be
- * truncated. Else they will be disallowed (ENAMETOOLONG).
- */
-#define NO_TRUNCATE 1
 #define INODE_VERSION(inode)	minix_sb(inode->i_sb)->s_version
 #define MINIX_V1		0x0001		/* original minix fs */
 #define MINIX_V2		0x0002		/* minix V2 fs */
@@ -83,7 +78,6 @@ extern const struct inode_operations minix_file_inode_operations;
 extern const struct inode_operations minix_dir_inode_operations;
 extern const struct file_operations minix_file_operations;
 extern const struct file_operations minix_dir_operations;
-extern struct dentry_operations minix_dentry_operations;
 
 static inline struct minix_sb_info *minix_sb(struct super_block *sb)
 {
diff --git a/fs/minix/namei.c b/fs/minix/namei.c
index 102241bc9c79..32b131cd6121 100644
--- a/fs/minix/namei.c
+++ b/fs/minix/namei.c
@@ -18,30 +18,6 @@ static int add_nondir(struct dentry *dentry, struct inode *inode)
 	return err;
 }
 
-static int minix_hash(struct dentry *dentry, struct qstr *qstr)
-{
-	unsigned long hash;
-	int i;
-	const unsigned char *name;
-
-	i = minix_sb(dentry->d_inode->i_sb)->s_namelen;
-	if (i >= qstr->len)
-		return 0;
-	/* Truncate the name in place, avoids having to define a compare
-	   function. */
-	qstr->len = i;
-	name = qstr->name;
-	hash = init_name_hash();
-	while (i--)
-		hash = partial_name_hash(*name++, hash);
-	qstr->hash = end_name_hash(hash);
-	return 0;
-}
-
-struct dentry_operations minix_dentry_operations = {
-	.d_hash		= minix_hash,
-};
-
 static struct dentry *minix_lookup(struct inode * dir, struct dentry *dentry, struct nameidata *nd)
 {
 	struct inode * inode = NULL;
diff --git a/fs/msdos/namei.c b/fs/msdos/namei.c
index 1f7f2956412a..e844b9809d27 100644
--- a/fs/msdos/namei.c
+++ b/fs/msdos/namei.c
@@ -14,12 +14,7 @@
 
 /* Characters that are undesirable in an MS-DOS file name */
 static unsigned char bad_chars[] = "*?<>|\"";
-static unsigned char bad_if_strict_pc[] = "+=,; ";
-/* GEMDOS is less restrictive */
-static unsigned char bad_if_strict_atari[] = " ";
-
-#define bad_if_strict(opts) \
-	((opts)->atari ? bad_if_strict_atari : bad_if_strict_pc)
+static unsigned char bad_if_strict[] = "+=,; ";
 
 /***** Formats an MS-DOS file name. Rejects invalid names. */
 static int msdos_format_name(const unsigned char *name, int len,
@@ -40,21 +35,20 @@ static int msdos_format_name(const unsigned char *name, int len,
 			/* Get rid of dot - test for it elsewhere */
 			name++;
 			len--;
-		} else if (!opts->atari)
+		} else
 			return -EINVAL;
 	}
 	/*
-	 * disallow names that _really_ start with a dot for MS-DOS,
-	 * GEMDOS does not care
+	 * disallow names that _really_ start with a dot
 	 */
-	space = !opts->atari;
+	space = 1;
 	c = 0;
 	for (walk = res; len && walk - res < 8; walk++) {
 		c = *name++;
 		len--;
 		if (opts->name_check != 'r' && strchr(bad_chars, c))
 			return -EINVAL;
-		if (opts->name_check == 's' && strchr(bad_if_strict(opts), c))
+		if (opts->name_check == 's' && strchr(bad_if_strict, c))
 			return -EINVAL;
 		if (c >= 'A' && c <= 'Z' && opts->name_check == 's')
 			return -EINVAL;
@@ -94,7 +88,7 @@ static int msdos_format_name(const unsigned char *name, int len,
 			if (opts->name_check != 'r' && strchr(bad_chars, c))
 				return -EINVAL;
 			if (opts->name_check == 's' &&
-			    strchr(bad_if_strict(opts), c))
+			    strchr(bad_if_strict, c))
 				return -EINVAL;
 			if (c < ' ' || c == ':' || c == '\\')
 				return -EINVAL;
@@ -243,6 +237,7 @@ static int msdos_add_entry(struct inode *dir, const unsigned char *name,
 			   int is_dir, int is_hid, int cluster,
 			   struct timespec *ts, struct fat_slot_info *sinfo)
 {
+	struct msdos_sb_info *sbi = MSDOS_SB(dir->i_sb);
 	struct msdos_dir_entry de;
 	__le16 time, date;
 	int err;
@@ -252,7 +247,7 @@ static int msdos_add_entry(struct inode *dir, const unsigned char *name,
 	if (is_hid)
 		de.attr |= ATTR_HIDDEN;
 	de.lcase = 0;
-	fat_date_unix2dos(ts->tv_sec, &time, &date);
+	fat_date_unix2dos(ts->tv_sec, &time, &date, sbi->options.tz_utc);
 	de.cdate = de.adate = 0;
 	de.ctime = 0;
 	de.ctime_cs = 0;
diff --git a/fs/namei.c b/fs/namei.c
index 01e67dddcc3d..4ea63ed5e791 100644
--- a/fs/namei.c
+++ b/fs/namei.c
@@ -31,7 +31,6 @@
 #include <linux/file.h>
 #include <linux/fcntl.h>
 #include <linux/device_cgroup.h>
-#include <asm/namei.h>
 #include <asm/uaccess.h>
 
 #define ACC_MODE(x) ("\000\004\002\006"[(x)&O_ACCMODE])
@@ -185,6 +184,8 @@ int generic_permission(struct inode *inode, int mask,
 {
 	umode_t			mode = inode->i_mode;
 
+	mask &= MAY_READ | MAY_WRITE | MAY_EXEC;
+
 	if (current->fsuid == inode->i_uid)
 		mode >>= 6;
 	else {
@@ -203,7 +204,7 @@ int generic_permission(struct inode *inode, int mask,
 	/*
 	 * If the DACs are ok we don't need any capability check.
 	 */
-	if (((mode & mask & (MAY_READ|MAY_WRITE|MAY_EXEC)) == mask))
+	if ((mask & ~mode) == 0)
 		return 0;
 
  check_capabilities:
@@ -226,13 +227,9 @@ int generic_permission(struct inode *inode, int mask,
 	return -EACCES;
 }
 
-int permission(struct inode *inode, int mask, struct nameidata *nd)
+int inode_permission(struct inode *inode, int mask)
 {
-	int retval, submask;
-	struct vfsmount *mnt = NULL;
-
-	if (nd)
-		mnt = nd->path.mnt;
+	int retval;
 
 	if (mask & MAY_WRITE) {
 		umode_t mode = inode->i_mode;
@@ -251,19 +248,9 @@ int permission(struct inode *inode, int mask, struct nameidata *nd)
 			return -EACCES;
 	}
 
-	if ((mask & MAY_EXEC) && S_ISREG(inode->i_mode)) {
-		/*
-		 * MAY_EXEC on regular files is denied if the fs is mounted
-		 * with the "noexec" flag.
-		 */
-		if (mnt && (mnt->mnt_flags & MNT_NOEXEC))
-			return -EACCES;
-	}
-
 	/* Ordinary permission routines do not understand MAY_APPEND. */
-	submask = mask & ~MAY_APPEND;
 	if (inode->i_op && inode->i_op->permission) {
-		retval = inode->i_op->permission(inode, submask, nd);
+		retval = inode->i_op->permission(inode, mask);
 		if (!retval) {
 			/*
 			 * Exec permission on a regular file is denied if none
@@ -277,7 +264,7 @@ int permission(struct inode *inode, int mask, struct nameidata *nd)
 				return -EACCES;
 		}
 	} else {
-		retval = generic_permission(inode, submask, NULL);
+		retval = generic_permission(inode, mask, NULL);
 	}
 	if (retval)
 		return retval;
@@ -286,7 +273,8 @@ int permission(struct inode *inode, int mask, struct nameidata *nd)
 	if (retval)
 		return retval;
 
-	return security_inode_permission(inode, mask, nd);
+	return security_inode_permission(inode,
+			mask & (MAY_READ|MAY_WRITE|MAY_EXEC|MAY_APPEND));
 }
 
 /**
@@ -301,7 +289,7 @@ int permission(struct inode *inode, int mask, struct nameidata *nd)
  */
 int vfs_permission(struct nameidata *nd, int mask)
 {
-	return permission(nd->path.dentry->d_inode, mask, nd);
+	return inode_permission(nd->path.dentry->d_inode, mask);
 }
 
 /**
@@ -318,7 +306,7 @@ int vfs_permission(struct nameidata *nd, int mask)
  */
 int file_permission(struct file *file, int mask)
 {
-	return permission(file->f_path.dentry->d_inode, mask, NULL);
+	return inode_permission(file->f_path.dentry->d_inode, mask);
 }
 
 /*
@@ -459,8 +447,7 @@ static struct dentry * cached_lookup(struct dentry * parent, struct qstr * name,
  * short-cut DAC fails, then call permission() to do more
  * complete permission check.
  */
-static int exec_permission_lite(struct inode *inode,
-				       struct nameidata *nd)
+static int exec_permission_lite(struct inode *inode)
 {
 	umode_t	mode = inode->i_mode;
 
@@ -486,7 +473,7 @@ static int exec_permission_lite(struct inode *inode,
 
 	return -EACCES;
 ok:
-	return security_inode_permission(inode, MAY_EXEC, nd);
+	return security_inode_permission(inode, MAY_EXEC);
 }
 
 /*
@@ -519,7 +506,14 @@ static struct dentry * real_lookup(struct dentry * parent, struct qstr * name, s
 	 */
 	result = d_lookup(parent, name);
 	if (!result) {
-		struct dentry * dentry = d_alloc(parent, name);
+		struct dentry *dentry;
+
+		/* Don't create child dentry for a dead directory. */
+		result = ERR_PTR(-ENOENT);
+		if (IS_DEADDIR(dir))
+			goto out_unlock;
+
+		dentry = d_alloc(parent, name);
 		result = ERR_PTR(-ENOMEM);
 		if (dentry) {
 			result = dir->i_op->lookup(dir, dentry, nd);
@@ -528,6 +522,7 @@ static struct dentry * real_lookup(struct dentry * parent, struct qstr * name, s
 			else
 				result = dentry;
 		}
+out_unlock:
 		mutex_unlock(&dir->i_mutex);
 		return result;
 	}
@@ -545,27 +540,16 @@ static struct dentry * real_lookup(struct dentry * parent, struct qstr * name, s
 	return result;
 }
 
-static int __emul_lookup_dentry(const char *, struct nameidata *);
-
 /* SMP-safe */
-static __always_inline int
+static __always_inline void
 walk_init_root(const char *name, struct nameidata *nd)
 {
 	struct fs_struct *fs = current->fs;
 
 	read_lock(&fs->lock);
-	if (fs->altroot.dentry && !(nd->flags & LOOKUP_NOALT)) {
-		nd->path = fs->altroot;
-		path_get(&fs->altroot);
-		read_unlock(&fs->lock);
-		if (__emul_lookup_dentry(name,nd))
-			return 0;
-		read_lock(&fs->lock);
-	}
 	nd->path = fs->root;
 	path_get(&fs->root);
 	read_unlock(&fs->lock);
-	return 1;
 }
 
 /*
@@ -606,12 +590,9 @@ static __always_inline int __vfs_follow_link(struct nameidata *nd, const char *l
 
 	if (*link == '/') {
 		path_put(&nd->path);
-		if (!walk_init_root(link, nd))
-			/* weird __emul_prefix() stuff did it */
-			goto out;
+		walk_init_root(link, nd);
 	}
 	res = link_path_walk(link, nd);
-out:
 	if (nd->depth || res || nd->last_type!=LAST_NORM)
 		return res;
 	/*
@@ -889,7 +870,7 @@ static int __link_path_walk(const char *name, struct nameidata *nd)
 		unsigned int c;
 
 		nd->flags |= LOOKUP_CONTINUE;
-		err = exec_permission_lite(inode, nd);
+		err = exec_permission_lite(inode);
 		if (err == -EAGAIN)
 			err = vfs_permission(nd, MAY_EXEC);
  		if (err)
@@ -1060,67 +1041,6 @@ static int path_walk(const char *name, struct nameidata *nd)
 	return link_path_walk(name, nd);
 }
 
-/* 
- * SMP-safe: Returns 1 and nd will have valid dentry and mnt, if
- * everything is done. Returns 0 and drops input nd, if lookup failed;
- */
-static int __emul_lookup_dentry(const char *name, struct nameidata *nd)
-{
-	if (path_walk(name, nd))
-		return 0;		/* something went wrong... */
-
-	if (!nd->path.dentry->d_inode ||
-	    S_ISDIR(nd->path.dentry->d_inode->i_mode)) {
-		struct path old_path = nd->path;
-		struct qstr last = nd->last;
-		int last_type = nd->last_type;
-		struct fs_struct *fs = current->fs;
-
-		/*
-		 * NAME was not found in alternate root or it's a directory.
-		 * Try to find it in the normal root:
-		 */
-		nd->last_type = LAST_ROOT;
-		read_lock(&fs->lock);
-		nd->path = fs->root;
-		path_get(&fs->root);
-		read_unlock(&fs->lock);
-		if (path_walk(name, nd) == 0) {
-			if (nd->path.dentry->d_inode) {
-				path_put(&old_path);
-				return 1;
-			}
-			path_put(&nd->path);
-		}
-		nd->path = old_path;
-		nd->last = last;
-		nd->last_type = last_type;
-	}
-	return 1;
-}
-
-void set_fs_altroot(void)
-{
-	char *emul = __emul_prefix();
-	struct nameidata nd;
-	struct path path = {}, old_path;
-	int err;
-	struct fs_struct *fs = current->fs;
-
-	if (!emul)
-		goto set_it;
-	err = path_lookup(emul, LOOKUP_FOLLOW|LOOKUP_DIRECTORY|LOOKUP_NOALT, &nd);
-	if (!err)
-		path = nd.path;
-set_it:
-	write_lock(&fs->lock);
-	old_path = fs->altroot;
-	fs->altroot = path;
-	write_unlock(&fs->lock);
-	if (old_path.dentry)
-		path_put(&old_path);
-}
-
 /* Returns 0 and nd will be valid on success; Retuns error, otherwise. */
 static int do_path_lookup(int dfd, const char *name,
 				unsigned int flags, struct nameidata *nd)
@@ -1136,14 +1056,6 @@ static int do_path_lookup(int dfd, const char *name,
 
 	if (*name=='/') {
 		read_lock(&fs->lock);
-		if (fs->altroot.dentry && !(nd->flags & LOOKUP_NOALT)) {
-			nd->path = fs->altroot;
-			path_get(&fs->altroot);
-			read_unlock(&fs->lock);
-			if (__emul_lookup_dentry(name,nd))
-				goto out; /* found in altroot */
-			read_lock(&fs->lock);
-		}
 		nd->path = fs->root;
 		path_get(&fs->root);
 		read_unlock(&fs->lock);
@@ -1177,7 +1089,6 @@ static int do_path_lookup(int dfd, const char *name,
 	}
 
 	retval = path_walk(name, nd);
-out:
 	if (unlikely(!retval && !audit_dummy_context() && nd->path.dentry &&
 				nd->path.dentry->d_inode))
 		audit_inode(name, nd->path.dentry);
@@ -1282,19 +1193,6 @@ static int path_lookup_create(int dfd, const char *name,
 			nd, open_flags, create_mode);
 }
 
-int __user_path_lookup_open(const char __user *name, unsigned int lookup_flags,
-		struct nameidata *nd, int open_flags)
-{
-	char *tmp = getname(name);
-	int err = PTR_ERR(tmp);
-
-	if (!IS_ERR(tmp)) {
-		err = __path_lookup_intent_open(AT_FDCWD, tmp, lookup_flags, nd, open_flags, 0);
-		putname(tmp);
-	}
-	return err;
-}
-
 static struct dentry *__lookup_hash(struct qstr *name,
 		struct dentry *base, struct nameidata *nd)
 {
@@ -1317,7 +1215,14 @@ static struct dentry *__lookup_hash(struct qstr *name,
 
 	dentry = cached_lookup(base, name, nd);
 	if (!dentry) {
-		struct dentry *new = d_alloc(base, name);
+		struct dentry *new;
+
+		/* Don't create child dentry for a dead directory. */
+		dentry = ERR_PTR(-ENOENT);
+		if (IS_DEADDIR(inode))
+			goto out;
+
+		new = d_alloc(base, name);
 		dentry = ERR_PTR(-ENOMEM);
 		if (!new)
 			goto out;
@@ -1340,7 +1245,7 @@ static struct dentry *lookup_hash(struct nameidata *nd)
 {
 	int err;
 
-	err = permission(nd->path.dentry->d_inode, MAY_EXEC, nd);
+	err = inode_permission(nd->path.dentry->d_inode, MAY_EXEC);
 	if (err)
 		return ERR_PTR(err);
 	return __lookup_hash(&nd->last, nd->path.dentry, nd);
@@ -1388,7 +1293,7 @@ struct dentry *lookup_one_len(const char *name, struct dentry *base, int len)
 	if (err)
 		return ERR_PTR(err);
 
-	err = permission(base->d_inode, MAY_EXEC, NULL);
+	err = inode_permission(base->d_inode, MAY_EXEC);
 	if (err)
 		return ERR_PTR(err);
 	return __lookup_hash(&this, base, NULL);
@@ -1416,22 +1321,40 @@ struct dentry *lookup_one_noperm(const char *name, struct dentry *base)
 	return __lookup_hash(&this, base, NULL);
 }
 
-int __user_walk_fd(int dfd, const char __user *name, unsigned flags,
-			    struct nameidata *nd)
+int user_path_at(int dfd, const char __user *name, unsigned flags,
+		 struct path *path)
 {
+	struct nameidata nd;
 	char *tmp = getname(name);
 	int err = PTR_ERR(tmp);
-
 	if (!IS_ERR(tmp)) {
-		err = do_path_lookup(dfd, tmp, flags, nd);
+
+		BUG_ON(flags & LOOKUP_PARENT);
+
+		err = do_path_lookup(dfd, tmp, flags, &nd);
 		putname(tmp);
+		if (!err)
+			*path = nd.path;
 	}
 	return err;
 }
 
-int __user_walk(const char __user *name, unsigned flags, struct nameidata *nd)
+static int user_path_parent(int dfd, const char __user *path,
+			struct nameidata *nd, char **name)
 {
-	return __user_walk_fd(AT_FDCWD, name, flags, nd);
+	char *s = getname(path);
+	int error;
+
+	if (IS_ERR(s))
+		return PTR_ERR(s);
+
+	error = do_path_lookup(dfd, s, LOOKUP_PARENT, nd);
+	if (error)
+		putname(s);
+	else
+		*name = s;
+
+	return error;
 }
 
 /*
@@ -1478,7 +1401,7 @@ static int may_delete(struct inode *dir,struct dentry *victim,int isdir)
 	BUG_ON(victim->d_parent->d_inode != dir);
 	audit_inode_child(victim->d_name.name, victim, dir);
 
-	error = permission(dir,MAY_WRITE | MAY_EXEC, NULL);
+	error = inode_permission(dir, MAY_WRITE | MAY_EXEC);
 	if (error)
 		return error;
 	if (IS_APPEND(dir))
@@ -1508,14 +1431,13 @@ static int may_delete(struct inode *dir,struct dentry *victim,int isdir)
  *  3. We should have write and exec permissions on dir
  *  4. We can't do it if dir is immutable (done in permission())
  */
-static inline int may_create(struct inode *dir, struct dentry *child,
-			     struct nameidata *nd)
+static inline int may_create(struct inode *dir, struct dentry *child)
 {
 	if (child->d_inode)
 		return -EEXIST;
 	if (IS_DEADDIR(dir))
 		return -ENOENT;
-	return permission(dir,MAY_WRITE | MAY_EXEC, nd);
+	return inode_permission(dir, MAY_WRITE | MAY_EXEC);
 }
 
 /* 
@@ -1581,7 +1503,7 @@ void unlock_rename(struct dentry *p1, struct dentry *p2)
 int vfs_create(struct inode *dir, struct dentry *dentry, int mode,
 		struct nameidata *nd)
 {
-	int error = may_create(dir, dentry, nd);
+	int error = may_create(dir, dentry);
 
 	if (error)
 		return error;
@@ -1755,7 +1677,7 @@ struct file *do_filp_open(int dfd, const char *pathname,
 	int will_write;
 	int flag = open_to_namei_flags(open_flag);
 
-	acc_mode = ACC_MODE(flag);
+	acc_mode = MAY_OPEN | ACC_MODE(flag);
 
 	/* O_TRUNC implies we need access checks for write permissions */
 	if (flag & O_TRUNC)
@@ -2025,7 +1947,7 @@ EXPORT_SYMBOL_GPL(lookup_create);
 
 int vfs_mknod(struct inode *dir, struct dentry *dentry, int mode, dev_t dev)
 {
-	int error = may_create(dir, dentry, NULL);
+	int error = may_create(dir, dentry);
 
 	if (error)
 		return error;
@@ -2071,20 +1993,18 @@ static int may_mknod(mode_t mode)
 asmlinkage long sys_mknodat(int dfd, const char __user *filename, int mode,
 				unsigned dev)
 {
-	int error = 0;
-	char * tmp;
-	struct dentry * dentry;
+	int error;
+	char *tmp;
+	struct dentry *dentry;
 	struct nameidata nd;
 
 	if (S_ISDIR(mode))
 		return -EPERM;
-	tmp = getname(filename);
-	if (IS_ERR(tmp))
-		return PTR_ERR(tmp);
 
-	error = do_path_lookup(dfd, tmp, LOOKUP_PARENT, &nd);
+	error = user_path_parent(dfd, filename, &nd, &tmp);
 	if (error)
-		goto out;
+		return error;
+
 	dentry = lookup_create(&nd, 0);
 	if (IS_ERR(dentry)) {
 		error = PTR_ERR(dentry);
@@ -2116,7 +2036,6 @@ out_dput:
 out_unlock:
 	mutex_unlock(&nd.path.dentry->d_inode->i_mutex);
 	path_put(&nd.path);
-out:
 	putname(tmp);
 
 	return error;
@@ -2129,7 +2048,7 @@ asmlinkage long sys_mknod(const char __user *filename, int mode, unsigned dev)
 
 int vfs_mkdir(struct inode *dir, struct dentry *dentry, int mode)
 {
-	int error = may_create(dir, dentry, NULL);
+	int error = may_create(dir, dentry);
 
 	if (error)
 		return error;
@@ -2156,14 +2075,10 @@ asmlinkage long sys_mkdirat(int dfd, const char __user *pathname, int mode)
 	struct dentry *dentry;
 	struct nameidata nd;
 
-	tmp = getname(pathname);
-	error = PTR_ERR(tmp);
-	if (IS_ERR(tmp))
+	error = user_path_parent(dfd, pathname, &nd, &tmp);
+	if (error)
 		goto out_err;
 
-	error = do_path_lookup(dfd, tmp, LOOKUP_PARENT, &nd);
-	if (error)
-		goto out;
 	dentry = lookup_create(&nd, 1);
 	error = PTR_ERR(dentry);
 	if (IS_ERR(dentry))
@@ -2181,7 +2096,6 @@ out_dput:
 out_unlock:
 	mutex_unlock(&nd.path.dentry->d_inode->i_mutex);
 	path_put(&nd.path);
-out:
 	putname(tmp);
 out_err:
 	return error;
@@ -2259,13 +2173,9 @@ static long do_rmdir(int dfd, const char __user *pathname)
 	struct dentry *dentry;
 	struct nameidata nd;
 
-	name = getname(pathname);
-	if(IS_ERR(name))
-		return PTR_ERR(name);
-
-	error = do_path_lookup(dfd, name, LOOKUP_PARENT, &nd);
+	error = user_path_parent(dfd, pathname, &nd, &name);
 	if (error)
-		goto exit;
+		return error;
 
 	switch(nd.last_type) {
 		case LAST_DOTDOT:
@@ -2294,7 +2204,6 @@ exit2:
 	mutex_unlock(&nd.path.dentry->d_inode->i_mutex);
 exit1:
 	path_put(&nd.path);
-exit:
 	putname(name);
 	return error;
 }
@@ -2343,19 +2252,16 @@ int vfs_unlink(struct inode *dir, struct dentry *dentry)
  */
 static long do_unlinkat(int dfd, const char __user *pathname)
 {
-	int error = 0;
-	char * name;
+	int error;
+	char *name;
 	struct dentry *dentry;
 	struct nameidata nd;
 	struct inode *inode = NULL;
 
-	name = getname(pathname);
-	if(IS_ERR(name))
-		return PTR_ERR(name);
-
-	error = do_path_lookup(dfd, name, LOOKUP_PARENT, &nd);
+	error = user_path_parent(dfd, pathname, &nd, &name);
 	if (error)
-		goto exit;
+		return error;
+
 	error = -EISDIR;
 	if (nd.last_type != LAST_NORM)
 		goto exit1;
@@ -2382,7 +2288,6 @@ static long do_unlinkat(int dfd, const char __user *pathname)
 		iput(inode);	/* truncate the inode here */
 exit1:
 	path_put(&nd.path);
-exit:
 	putname(name);
 	return error;
 
@@ -2408,9 +2313,9 @@ asmlinkage long sys_unlink(const char __user *pathname)
 	return do_unlinkat(AT_FDCWD, pathname);
 }
 
-int vfs_symlink(struct inode *dir, struct dentry *dentry, const char *oldname, int mode)
+int vfs_symlink(struct inode *dir, struct dentry *dentry, const char *oldname)
 {
-	int error = may_create(dir, dentry, NULL);
+	int error = may_create(dir, dentry);
 
 	if (error)
 		return error;
@@ -2432,23 +2337,20 @@ int vfs_symlink(struct inode *dir, struct dentry *dentry, const char *oldname, i
 asmlinkage long sys_symlinkat(const char __user *oldname,
 			      int newdfd, const char __user *newname)
 {
-	int error = 0;
-	char * from;
-	char * to;
+	int error;
+	char *from;
+	char *to;
 	struct dentry *dentry;
 	struct nameidata nd;
 
 	from = getname(oldname);
-	if(IS_ERR(from))
+	if (IS_ERR(from))
 		return PTR_ERR(from);
-	to = getname(newname);
-	error = PTR_ERR(to);
-	if (IS_ERR(to))
-		goto out_putname;
 
-	error = do_path_lookup(newdfd, to, LOOKUP_PARENT, &nd);
+	error = user_path_parent(newdfd, newname, &nd, &to);
 	if (error)
-		goto out;
+		goto out_putname;
+
 	dentry = lookup_create(&nd, 0);
 	error = PTR_ERR(dentry);
 	if (IS_ERR(dentry))
@@ -2457,14 +2359,13 @@ asmlinkage long sys_symlinkat(const char __user *oldname,
 	error = mnt_want_write(nd.path.mnt);
 	if (error)
 		goto out_dput;
-	error = vfs_symlink(nd.path.dentry->d_inode, dentry, from, S_IALLUGO);
+	error = vfs_symlink(nd.path.dentry->d_inode, dentry, from);
 	mnt_drop_write(nd.path.mnt);
 out_dput:
 	dput(dentry);
 out_unlock:
 	mutex_unlock(&nd.path.dentry->d_inode->i_mutex);
 	path_put(&nd.path);
-out:
 	putname(to);
 out_putname:
 	putname(from);
@@ -2484,7 +2385,7 @@ int vfs_link(struct dentry *old_dentry, struct inode *dir, struct dentry *new_de
 	if (!inode)
 		return -ENOENT;
 
-	error = may_create(dir, new_dentry, NULL);
+	error = may_create(dir, new_dentry);
 	if (error)
 		return error;
 
@@ -2498,19 +2399,19 @@ int vfs_link(struct dentry *old_dentry, struct inode *dir, struct dentry *new_de
 		return -EPERM;
 	if (!dir->i_op || !dir->i_op->link)
 		return -EPERM;
-	if (S_ISDIR(old_dentry->d_inode->i_mode))
+	if (S_ISDIR(inode->i_mode))
 		return -EPERM;
 
 	error = security_inode_link(old_dentry, dir, new_dentry);
 	if (error)
 		return error;
 
-	mutex_lock(&old_dentry->d_inode->i_mutex);
+	mutex_lock(&inode->i_mutex);
 	DQUOT_INIT(dir);
 	error = dir->i_op->link(old_dentry, dir, new_dentry);
-	mutex_unlock(&old_dentry->d_inode->i_mutex);
+	mutex_unlock(&inode->i_mutex);
 	if (!error)
-		fsnotify_link(dir, old_dentry->d_inode, new_dentry);
+		fsnotify_link(dir, inode, new_dentry);
 	return error;
 }
 
@@ -2528,27 +2429,25 @@ asmlinkage long sys_linkat(int olddfd, const char __user *oldname,
 			   int flags)
 {
 	struct dentry *new_dentry;
-	struct nameidata nd, old_nd;
+	struct nameidata nd;
+	struct path old_path;
 	int error;
-	char * to;
+	char *to;
 
 	if ((flags & ~AT_SYMLINK_FOLLOW) != 0)
 		return -EINVAL;
 
-	to = getname(newname);
-	if (IS_ERR(to))
-		return PTR_ERR(to);
-
-	error = __user_walk_fd(olddfd, oldname,
-			       flags & AT_SYMLINK_FOLLOW ? LOOKUP_FOLLOW : 0,
-			       &old_nd);
+	error = user_path_at(olddfd, oldname,
+			     flags & AT_SYMLINK_FOLLOW ? LOOKUP_FOLLOW : 0,
+			     &old_path);
 	if (error)
-		goto exit;
-	error = do_path_lookup(newdfd, to, LOOKUP_PARENT, &nd);
+		return error;
+
+	error = user_path_parent(newdfd, newname, &nd, &to);
 	if (error)
 		goto out;
 	error = -EXDEV;
-	if (old_nd.path.mnt != nd.path.mnt)
+	if (old_path.mnt != nd.path.mnt)
 		goto out_release;
 	new_dentry = lookup_create(&nd, 0);
 	error = PTR_ERR(new_dentry);
@@ -2557,7 +2456,7 @@ asmlinkage long sys_linkat(int olddfd, const char __user *oldname,
 	error = mnt_want_write(nd.path.mnt);
 	if (error)
 		goto out_dput;
-	error = vfs_link(old_nd.path.dentry, nd.path.dentry->d_inode, new_dentry);
+	error = vfs_link(old_path.dentry, nd.path.dentry->d_inode, new_dentry);
 	mnt_drop_write(nd.path.mnt);
 out_dput:
 	dput(new_dentry);
@@ -2565,10 +2464,9 @@ out_unlock:
 	mutex_unlock(&nd.path.dentry->d_inode->i_mutex);
 out_release:
 	path_put(&nd.path);
-out:
-	path_put(&old_nd.path);
-exit:
 	putname(to);
+out:
+	path_put(&old_path);
 
 	return error;
 }
@@ -2621,7 +2519,7 @@ static int vfs_rename_dir(struct inode *old_dir, struct dentry *old_dentry,
 	 * we'll need to flip '..'.
 	 */
 	if (new_dir != old_dir) {
-		error = permission(old_dentry->d_inode, MAY_WRITE, NULL);
+		error = inode_permission(old_dentry->d_inode, MAY_WRITE);
 		if (error)
 			return error;
 	}
@@ -2696,7 +2594,7 @@ int vfs_rename(struct inode *old_dir, struct dentry *old_dentry,
 		return error;
 
 	if (!new_dentry->d_inode)
-		error = may_create(new_dir, new_dentry, NULL);
+		error = may_create(new_dir, new_dentry);
 	else
 		error = may_delete(new_dir, new_dentry, is_dir);
 	if (error)
@@ -2724,20 +2622,22 @@ int vfs_rename(struct inode *old_dir, struct dentry *old_dentry,
 	return error;
 }
 
-static int do_rename(int olddfd, const char *oldname,
-			int newdfd, const char *newname)
+asmlinkage long sys_renameat(int olddfd, const char __user *oldname,
+			     int newdfd, const char __user *newname)
 {
-	int error = 0;
-	struct dentry * old_dir, * new_dir;
-	struct dentry * old_dentry, *new_dentry;
-	struct dentry * trap;
+	struct dentry *old_dir, *new_dir;
+	struct dentry *old_dentry, *new_dentry;
+	struct dentry *trap;
 	struct nameidata oldnd, newnd;
+	char *from;
+	char *to;
+	int error;
 
-	error = do_path_lookup(olddfd, oldname, LOOKUP_PARENT, &oldnd);
+	error = user_path_parent(olddfd, oldname, &oldnd, &from);
 	if (error)
 		goto exit;
 
-	error = do_path_lookup(newdfd, newname, LOOKUP_PARENT, &newnd);
+	error = user_path_parent(newdfd, newname, &newnd, &to);
 	if (error)
 		goto exit1;
 
@@ -2799,29 +2699,11 @@ exit3:
 	unlock_rename(new_dir, old_dir);
 exit2:
 	path_put(&newnd.path);
+	putname(to);
 exit1:
 	path_put(&oldnd.path);
-exit:
-	return error;
-}
-
-asmlinkage long sys_renameat(int olddfd, const char __user *oldname,
-			     int newdfd, const char __user *newname)
-{
-	int error;
-	char * from;
-	char * to;
-
-	from = getname(oldname);
-	if(IS_ERR(from))
-		return PTR_ERR(from);
-	to = getname(newname);
-	error = PTR_ERR(to);
-	if (!IS_ERR(to)) {
-		error = do_rename(olddfd, from, newdfd, to);
-		putname(to);
-	}
 	putname(from);
+exit:
 	return error;
 }
 
@@ -2959,8 +2841,7 @@ const struct inode_operations page_symlink_inode_operations = {
 	.put_link	= page_put_link,
 };
 
-EXPORT_SYMBOL(__user_walk);
-EXPORT_SYMBOL(__user_walk_fd);
+EXPORT_SYMBOL(user_path_at);
 EXPORT_SYMBOL(follow_down);
 EXPORT_SYMBOL(follow_up);
 EXPORT_SYMBOL(get_write_access); /* binfmt_aout */
@@ -2975,7 +2856,7 @@ EXPORT_SYMBOL(page_symlink);
 EXPORT_SYMBOL(page_symlink_inode_operations);
 EXPORT_SYMBOL(path_lookup);
 EXPORT_SYMBOL(vfs_path_lookup);
-EXPORT_SYMBOL(permission);
+EXPORT_SYMBOL(inode_permission);
 EXPORT_SYMBOL(vfs_permission);
 EXPORT_SYMBOL(file_permission);
 EXPORT_SYMBOL(unlock_rename);
diff --git a/fs/namespace.c b/fs/namespace.c
index 4f6f7635b59c..6e283c93b50d 100644
--- a/fs/namespace.c
+++ b/fs/namespace.c
@@ -112,9 +112,13 @@ struct vfsmount *alloc_vfsmnt(const char *name)
 		int err;
 
 		err = mnt_alloc_id(mnt);
-		if (err) {
-			kmem_cache_free(mnt_cache, mnt);
-			return NULL;
+		if (err)
+			goto out_free_cache;
+
+		if (name) {
+			mnt->mnt_devname = kstrdup(name, GFP_KERNEL);
+			if (!mnt->mnt_devname)
+				goto out_free_id;
 		}
 
 		atomic_set(&mnt->mnt_count, 1);
@@ -127,16 +131,14 @@ struct vfsmount *alloc_vfsmnt(const char *name)
 		INIT_LIST_HEAD(&mnt->mnt_slave_list);
 		INIT_LIST_HEAD(&mnt->mnt_slave);
 		atomic_set(&mnt->__mnt_writers, 0);
-		if (name) {
-			int size = strlen(name) + 1;
-			char *newname = kmalloc(size, GFP_KERNEL);
-			if (newname) {
-				memcpy(newname, name, size);
-				mnt->mnt_devname = newname;
-			}
-		}
 	}
 	return mnt;
+
+out_free_id:
+	mnt_free_id(mnt);
+out_free_cache:
+	kmem_cache_free(mnt_cache, mnt);
+	return NULL;
 }
 
 /*
@@ -309,10 +311,9 @@ static void handle_write_count_underflow(struct vfsmount *mnt)
 	 */
 	if ((atomic_read(&mnt->__mnt_writers) < 0) &&
 	    !(mnt->mnt_flags & MNT_IMBALANCED_WRITE_COUNT)) {
-		printk(KERN_DEBUG "leak detected on mount(%p) writers "
+		WARN(1, KERN_DEBUG "leak detected on mount(%p) writers "
 				"count: %d\n",
 			mnt, atomic_read(&mnt->__mnt_writers));
-		WARN_ON(1);
 		/* use the flag to keep the dmesg spam down */
 		mnt->mnt_flags |= MNT_IMBALANCED_WRITE_COUNT;
 	}
@@ -1129,27 +1130,27 @@ static int do_umount(struct vfsmount *mnt, int flags)
 
 asmlinkage long sys_umount(char __user * name, int flags)
 {
-	struct nameidata nd;
+	struct path path;
 	int retval;
 
-	retval = __user_walk(name, LOOKUP_FOLLOW, &nd);
+	retval = user_path(name, &path);
 	if (retval)
 		goto out;
 	retval = -EINVAL;
-	if (nd.path.dentry != nd.path.mnt->mnt_root)
+	if (path.dentry != path.mnt->mnt_root)
 		goto dput_and_out;
-	if (!check_mnt(nd.path.mnt))
+	if (!check_mnt(path.mnt))
 		goto dput_and_out;
 
 	retval = -EPERM;
 	if (!capable(CAP_SYS_ADMIN))
 		goto dput_and_out;
 
-	retval = do_umount(nd.path.mnt, flags);
+	retval = do_umount(path.mnt, flags);
 dput_and_out:
 	/* we mustn't call path_put() as that would clear mnt_expiry_mark */
-	dput(nd.path.dentry);
-	mntput_no_expire(nd.path.mnt);
+	dput(path.dentry);
+	mntput_no_expire(path.mnt);
 out:
 	return retval;
 }
@@ -1666,31 +1667,31 @@ static noinline int do_new_mount(struct nameidata *nd, char *type, int flags,
 	if (IS_ERR(mnt))
 		return PTR_ERR(mnt);
 
-	return do_add_mount(mnt, nd, mnt_flags, NULL);
+	return do_add_mount(mnt, &nd->path, mnt_flags, NULL);
 }
 
 /*
  * add a mount into a namespace's mount tree
  * - provide the option of adding the new mount to an expiration list
  */
-int do_add_mount(struct vfsmount *newmnt, struct nameidata *nd,
+int do_add_mount(struct vfsmount *newmnt, struct path *path,
 		 int mnt_flags, struct list_head *fslist)
 {
 	int err;
 
 	down_write(&namespace_sem);
 	/* Something was mounted here while we slept */
-	while (d_mountpoint(nd->path.dentry) &&
-	       follow_down(&nd->path.mnt, &nd->path.dentry))
+	while (d_mountpoint(path->dentry) &&
+	       follow_down(&path->mnt, &path->dentry))
 		;
 	err = -EINVAL;
-	if (!check_mnt(nd->path.mnt))
+	if (!check_mnt(path->mnt))
 		goto unlock;
 
 	/* Refuse the same filesystem on the same mount point */
 	err = -EBUSY;
-	if (nd->path.mnt->mnt_sb == newmnt->mnt_sb &&
-	    nd->path.mnt->mnt_root == nd->path.dentry)
+	if (path->mnt->mnt_sb == newmnt->mnt_sb &&
+	    path->mnt->mnt_root == path->dentry)
 		goto unlock;
 
 	err = -EINVAL;
@@ -1698,7 +1699,7 @@ int do_add_mount(struct vfsmount *newmnt, struct nameidata *nd,
 		goto unlock;
 
 	newmnt->mnt_flags = mnt_flags;
-	if ((err = graft_tree(newmnt, &nd->path)))
+	if ((err = graft_tree(newmnt, path)))
 		goto unlock;
 
 	if (fslist) /* add to the specified expiration list */
@@ -1973,7 +1974,7 @@ static struct mnt_namespace *dup_mnt_ns(struct mnt_namespace *mnt_ns,
 		struct fs_struct *fs)
 {
 	struct mnt_namespace *new_ns;
-	struct vfsmount *rootmnt = NULL, *pwdmnt = NULL, *altrootmnt = NULL;
+	struct vfsmount *rootmnt = NULL, *pwdmnt = NULL;
 	struct vfsmount *p, *q;
 
 	new_ns = kmalloc(sizeof(struct mnt_namespace), GFP_KERNEL);
@@ -2016,10 +2017,6 @@ static struct mnt_namespace *dup_mnt_ns(struct mnt_namespace *mnt_ns,
 				pwdmnt = p;
 				fs->pwd.mnt = mntget(q);
 			}
-			if (p == fs->altroot.mnt) {
-				altrootmnt = p;
-				fs->altroot.mnt = mntget(q);
-			}
 		}
 		p = next_mnt(p, mnt_ns->root);
 		q = next_mnt(q, new_ns->root);
@@ -2030,8 +2027,6 @@ static struct mnt_namespace *dup_mnt_ns(struct mnt_namespace *mnt_ns,
 		mntput(rootmnt);
 	if (pwdmnt)
 		mntput(pwdmnt);
-	if (altrootmnt)
-		mntput(altrootmnt);
 
 	return new_ns;
 }
@@ -2184,28 +2179,26 @@ asmlinkage long sys_pivot_root(const char __user * new_root,
 			       const char __user * put_old)
 {
 	struct vfsmount *tmp;
-	struct nameidata new_nd, old_nd;
-	struct path parent_path, root_parent, root;
+	struct path new, old, parent_path, root_parent, root;
 	int error;
 
 	if (!capable(CAP_SYS_ADMIN))
 		return -EPERM;
 
-	error = __user_walk(new_root, LOOKUP_FOLLOW | LOOKUP_DIRECTORY,
-			    &new_nd);
+	error = user_path_dir(new_root, &new);
 	if (error)
 		goto out0;
 	error = -EINVAL;
-	if (!check_mnt(new_nd.path.mnt))
+	if (!check_mnt(new.mnt))
 		goto out1;
 
-	error = __user_walk(put_old, LOOKUP_FOLLOW | LOOKUP_DIRECTORY, &old_nd);
+	error = user_path_dir(put_old, &old);
 	if (error)
 		goto out1;
 
-	error = security_sb_pivotroot(&old_nd.path, &new_nd.path);
+	error = security_sb_pivotroot(&old, &new);
 	if (error) {
-		path_put(&old_nd.path);
+		path_put(&old);
 		goto out1;
 	}
 
@@ -2214,69 +2207,69 @@ asmlinkage long sys_pivot_root(const char __user * new_root,
 	path_get(&current->fs->root);
 	read_unlock(&current->fs->lock);
 	down_write(&namespace_sem);
-	mutex_lock(&old_nd.path.dentry->d_inode->i_mutex);
+	mutex_lock(&old.dentry->d_inode->i_mutex);
 	error = -EINVAL;
-	if (IS_MNT_SHARED(old_nd.path.mnt) ||
-		IS_MNT_SHARED(new_nd.path.mnt->mnt_parent) ||
+	if (IS_MNT_SHARED(old.mnt) ||
+		IS_MNT_SHARED(new.mnt->mnt_parent) ||
 		IS_MNT_SHARED(root.mnt->mnt_parent))
 		goto out2;
 	if (!check_mnt(root.mnt))
 		goto out2;
 	error = -ENOENT;
-	if (IS_DEADDIR(new_nd.path.dentry->d_inode))
+	if (IS_DEADDIR(new.dentry->d_inode))
 		goto out2;
-	if (d_unhashed(new_nd.path.dentry) && !IS_ROOT(new_nd.path.dentry))
+	if (d_unhashed(new.dentry) && !IS_ROOT(new.dentry))
 		goto out2;
-	if (d_unhashed(old_nd.path.dentry) && !IS_ROOT(old_nd.path.dentry))
+	if (d_unhashed(old.dentry) && !IS_ROOT(old.dentry))
 		goto out2;
 	error = -EBUSY;
-	if (new_nd.path.mnt == root.mnt ||
-	    old_nd.path.mnt == root.mnt)
+	if (new.mnt == root.mnt ||
+	    old.mnt == root.mnt)
 		goto out2; /* loop, on the same file system  */
 	error = -EINVAL;
 	if (root.mnt->mnt_root != root.dentry)
 		goto out2; /* not a mountpoint */
 	if (root.mnt->mnt_parent == root.mnt)
 		goto out2; /* not attached */
-	if (new_nd.path.mnt->mnt_root != new_nd.path.dentry)
+	if (new.mnt->mnt_root != new.dentry)
 		goto out2; /* not a mountpoint */
-	if (new_nd.path.mnt->mnt_parent == new_nd.path.mnt)
+	if (new.mnt->mnt_parent == new.mnt)
 		goto out2; /* not attached */
 	/* make sure we can reach put_old from new_root */
-	tmp = old_nd.path.mnt;
+	tmp = old.mnt;
 	spin_lock(&vfsmount_lock);
-	if (tmp != new_nd.path.mnt) {
+	if (tmp != new.mnt) {
 		for (;;) {
 			if (tmp->mnt_parent == tmp)
 				goto out3; /* already mounted on put_old */
-			if (tmp->mnt_parent == new_nd.path.mnt)
+			if (tmp->mnt_parent == new.mnt)
 				break;
 			tmp = tmp->mnt_parent;
 		}
-		if (!is_subdir(tmp->mnt_mountpoint, new_nd.path.dentry))
+		if (!is_subdir(tmp->mnt_mountpoint, new.dentry))
 			goto out3;
-	} else if (!is_subdir(old_nd.path.dentry, new_nd.path.dentry))
+	} else if (!is_subdir(old.dentry, new.dentry))
 		goto out3;
-	detach_mnt(new_nd.path.mnt, &parent_path);
+	detach_mnt(new.mnt, &parent_path);
 	detach_mnt(root.mnt, &root_parent);
 	/* mount old root on put_old */
-	attach_mnt(root.mnt, &old_nd.path);
+	attach_mnt(root.mnt, &old);
 	/* mount new_root on / */
-	attach_mnt(new_nd.path.mnt, &root_parent);
+	attach_mnt(new.mnt, &root_parent);
 	touch_mnt_namespace(current->nsproxy->mnt_ns);
 	spin_unlock(&vfsmount_lock);
-	chroot_fs_refs(&root, &new_nd.path);
-	security_sb_post_pivotroot(&root, &new_nd.path);
+	chroot_fs_refs(&root, &new);
+	security_sb_post_pivotroot(&root, &new);
 	error = 0;
 	path_put(&root_parent);
 	path_put(&parent_path);
 out2:
-	mutex_unlock(&old_nd.path.dentry->d_inode->i_mutex);
+	mutex_unlock(&old.dentry->d_inode->i_mutex);
 	up_write(&namespace_sem);
 	path_put(&root);
-	path_put(&old_nd.path);
+	path_put(&old);
 out1:
-	path_put(&new_nd.path);
+	path_put(&new);
 out0:
 	return error;
 out3:
diff --git a/fs/ncpfs/dir.c b/fs/ncpfs/dir.c
index 011ef0b6d2d4..07e9715b8658 100644
--- a/fs/ncpfs/dir.c
+++ b/fs/ncpfs/dir.c
@@ -266,7 +266,7 @@ leave_me:;
 
 
 static int
-__ncp_lookup_validate(struct dentry * dentry, struct nameidata *nd)
+__ncp_lookup_validate(struct dentry *dentry)
 {
 	struct ncp_server *server;
 	struct dentry *parent;
@@ -340,7 +340,7 @@ ncp_lookup_validate(struct dentry * dentry, struct nameidata *nd)
 {
 	int res;
 	lock_kernel();
-	res = __ncp_lookup_validate(dentry, nd);
+	res = __ncp_lookup_validate(dentry);
 	unlock_kernel();
 	return res;
 }
diff --git a/fs/ncpfs/inode.c b/fs/ncpfs/inode.c
index 2e5ab1204dec..d642f0e5b365 100644
--- a/fs/ncpfs/inode.c
+++ b/fs/ncpfs/inode.c
@@ -64,7 +64,7 @@ static void ncp_destroy_inode(struct inode *inode)
 	kmem_cache_free(ncp_inode_cachep, NCP_FINFO(inode));
 }
 
-static void init_once(struct kmem_cache *cachep, void *foo)
+static void init_once(void *foo)
 {
 	struct ncp_inode_info *ei = (struct ncp_inode_info *) foo;
 
diff --git a/fs/nfs/dir.c b/fs/nfs/dir.c
index 28a238dab23a..74f92b717f78 100644
--- a/fs/nfs/dir.c
+++ b/fs/nfs/dir.c
@@ -1884,7 +1884,7 @@ static int nfs_do_access(struct inode *inode, struct rpc_cred *cred, int mask)
 		return status;
 	nfs_access_add_cache(inode, &cache);
 out:
-	if ((cache.mask & mask) == mask)
+	if ((mask & ~cache.mask & (MAY_READ | MAY_WRITE | MAY_EXEC)) == 0)
 		return 0;
 	return -EACCES;
 }
@@ -1907,17 +1907,17 @@ int nfs_may_open(struct inode *inode, struct rpc_cred *cred, int openflags)
 	return nfs_do_access(inode, cred, nfs_open_permission_mask(openflags));
 }
 
-int nfs_permission(struct inode *inode, int mask, struct nameidata *nd)
+int nfs_permission(struct inode *inode, int mask)
 {
 	struct rpc_cred *cred;
 	int res = 0;
 
 	nfs_inc_stats(inode, NFSIOS_VFSACCESS);
 
-	if (mask == 0)
+	if ((mask & (MAY_READ | MAY_WRITE | MAY_EXEC)) == 0)
 		goto out;
 	/* Is this sys_access() ? */
-	if (nd != NULL && (nd->flags & LOOKUP_ACCESS))
+	if (mask & MAY_ACCESS)
 		goto force_lookup;
 
 	switch (inode->i_mode & S_IFMT) {
@@ -1926,8 +1926,7 @@ int nfs_permission(struct inode *inode, int mask, struct nameidata *nd)
 		case S_IFREG:
 			/* NFSv4 has atomic_open... */
 			if (nfs_server_capable(inode, NFS_CAP_ATOMIC_OPEN)
-					&& nd != NULL
-					&& (nd->flags & LOOKUP_OPEN))
+					&& (mask & MAY_OPEN))
 				goto out;
 			break;
 		case S_IFDIR:
diff --git a/fs/nfs/inode.c b/fs/nfs/inode.c
index df23f987da6b..52daefa2f521 100644
--- a/fs/nfs/inode.c
+++ b/fs/nfs/inode.c
@@ -1242,7 +1242,7 @@ static inline void nfs4_init_once(struct nfs_inode *nfsi)
 #endif
 }
 
-static void init_once(struct kmem_cache * cachep, void *foo)
+static void init_once(void *foo)
 {
 	struct nfs_inode *nfsi = (struct nfs_inode *) foo;
 
diff --git a/fs/nfs/namespace.c b/fs/nfs/namespace.c
index 2f285ef76399..66df08dd1caf 100644
--- a/fs/nfs/namespace.c
+++ b/fs/nfs/namespace.c
@@ -129,7 +129,7 @@ static void * nfs_follow_mountpoint(struct dentry *dentry, struct nameidata *nd)
 		goto out_err;
 
 	mntget(mnt);
-	err = do_add_mount(mnt, nd, nd->path.mnt->mnt_flags|MNT_SHRINKABLE,
+	err = do_add_mount(mnt, &nd->path, nd->path.mnt->mnt_flags|MNT_SHRINKABLE,
 			   &nfs_automount_list);
 	if (err < 0) {
 		mntput(mnt);
diff --git a/fs/nfs/nfsroot.c b/fs/nfs/nfsroot.c
index 8478fc25daee..46763d1cd397 100644
--- a/fs/nfs/nfsroot.c
+++ b/fs/nfs/nfsroot.c
@@ -127,7 +127,7 @@ enum {
 	Opt_err
 };
 
-static match_table_t __initconst tokens = {
+static match_table_t __initdata tokens = {
 	{Opt_port, "port=%u"},
 	{Opt_rsize, "rsize=%u"},
 	{Opt_wsize, "wsize=%u"},
diff --git a/fs/nfs/super.c b/fs/nfs/super.c
index 1b94e3650f5c..9abcd2b329f7 100644
--- a/fs/nfs/super.c
+++ b/fs/nfs/super.c
@@ -1718,9 +1718,9 @@ nfs_remount(struct super_block *sb, int *flags, char *raw_data)
 	 * ones were explicitly specified. Fall back to legacy behavior and
 	 * just return success.
 	 */
-	if ((nfsvers == 4 && options4->version == 1) ||
-	    (nfsvers <= 3 && options->version >= 1 &&
-	     options->version <= 6))
+	if ((nfsvers == 4 && (!options4 || options4->version == 1)) ||
+	    (nfsvers <= 3 && (!options || (options->version >= 1 &&
+					   options->version <= 6))))
 		return 0;
 
 	data = kzalloc(sizeof(*data), GFP_KERNEL);
diff --git a/fs/nfs/unlink.c b/fs/nfs/unlink.c
index 3adf8b266461..f089e5839d7d 100644
--- a/fs/nfs/unlink.c
+++ b/fs/nfs/unlink.c
@@ -95,10 +95,11 @@ static void nfs_async_unlink_done(struct rpc_task *task, void *calldata)
 static void nfs_async_unlink_release(void *calldata)
 {
 	struct nfs_unlinkdata	*data = calldata;
+	struct super_block *sb = data->dir->i_sb;
 
 	nfs_dec_sillycount(data->dir);
-	nfs_sb_deactive(NFS_SERVER(data->dir));
 	nfs_free_unlinkdata(data);
+	nfs_sb_deactive(NFS_SB(sb));
 }
 
 static const struct rpc_call_ops nfs_unlink_ops = {
diff --git a/fs/nfsd/export.c b/fs/nfsd/export.c
index 33bfcf09db46..9dc036f18356 100644
--- a/fs/nfsd/export.c
+++ b/fs/nfsd/export.c
@@ -1023,7 +1023,7 @@ exp_export(struct nfsctl_export *nxp)
 	/* Look up the dentry */
 	err = path_lookup(nxp->ex_path, 0, &nd);
 	if (err)
-		goto out_unlock;
+		goto out_put_clp;
 	err = -EINVAL;
 
 	exp = exp_get_by_name(clp, nd.path.mnt, nd.path.dentry, NULL);
@@ -1090,9 +1090,9 @@ finish:
 		exp_put(exp);
 	if (fsid_key && !IS_ERR(fsid_key))
 		cache_put(&fsid_key->h, &svc_expkey_cache);
-	if (clp)
-		auth_domain_put(clp);
 	path_put(&nd.path);
+out_put_clp:
+	auth_domain_put(clp);
 out_unlock:
 	exp_writeunlock();
 out:
diff --git a/fs/nfsd/lockd.c b/fs/nfsd/lockd.c
index 6b6225ac4926..15c6faeec77c 100644
--- a/fs/nfsd/lockd.c
+++ b/fs/nfsd/lockd.c
@@ -19,6 +19,13 @@
 
 #define NFSDDBG_FACILITY		NFSDDBG_LOCKD
 
+#ifdef CONFIG_LOCKD_V4
+#define nlm_stale_fh	nlm4_stale_fh
+#define nlm_failed	nlm4_failed
+#else
+#define nlm_stale_fh	nlm_lck_denied_nolocks
+#define nlm_failed	nlm_lck_denied_nolocks
+#endif
 /*
  * Note: we hold the dentry use count while the file is open.
  */
@@ -47,12 +54,10 @@ nlm_fopen(struct svc_rqst *rqstp, struct nfs_fh *f, struct file **filp)
 		return 0;
 	case nfserr_dropit:
 		return nlm_drop_reply;
-#ifdef CONFIG_LOCKD_V4
 	case nfserr_stale:
-		return nlm4_stale_fh;
-#endif
+		return nlm_stale_fh;
 	default:
-		return nlm_lck_denied;
+		return nlm_failed;
 	}
 }
 
diff --git a/fs/nfsd/nfs4acl.c b/fs/nfsd/nfs4acl.c
index b6ed38380ab8..54b8b4140c8f 100644
--- a/fs/nfsd/nfs4acl.c
+++ b/fs/nfsd/nfs4acl.c
@@ -443,7 +443,7 @@ init_state(struct posix_acl_state *state, int cnt)
 	 * enough space for either:
 	 */
 	alloc = sizeof(struct posix_ace_state_array)
-		+ cnt*sizeof(struct posix_ace_state);
+		+ cnt*sizeof(struct posix_user_ace_state);
 	state->users = kzalloc(alloc, GFP_KERNEL);
 	if (!state->users)
 		return -ENOMEM;
diff --git a/fs/nfsd/nfs4proc.c b/fs/nfsd/nfs4proc.c
index eef1629806f5..e5b51ffafc6c 100644
--- a/fs/nfsd/nfs4proc.c
+++ b/fs/nfsd/nfs4proc.c
@@ -851,7 +851,7 @@ struct nfsd4_operation {
 
 static struct nfsd4_operation nfsd4_ops[];
 
-static inline char *nfsd4_op_name(unsigned opnum);
+static const char *nfsd4_op_name(unsigned opnum);
 
 /*
  * COMPOUND call.
@@ -867,11 +867,6 @@ nfsd4_proc_compound(struct svc_rqst *rqstp,
 	int		slack_bytes;
 	__be32		status;
 
-	status = nfserr_resource;
-	cstate = cstate_alloc();
-	if (cstate == NULL)
-		goto out;
-
 	resp->xbuf = &rqstp->rq_res;
 	resp->p = rqstp->rq_res.head[0].iov_base + rqstp->rq_res.head[0].iov_len;
 	resp->tagp = resp->p;
@@ -890,6 +885,11 @@ nfsd4_proc_compound(struct svc_rqst *rqstp,
 	if (args->minorversion > NFSD_SUPPORTED_MINOR_VERSION)
 		goto out;
 
+	status = nfserr_resource;
+	cstate = cstate_alloc();
+	if (cstate == NULL)
+		goto out;
+
 	status = nfs_ok;
 	while (!status && resp->opcnt < args->opcnt) {
 		op = &args->ops[resp->opcnt++];
@@ -957,9 +957,9 @@ encode_op:
 		nfsd4_increment_op_stats(op->opnum);
 	}
 
+	cstate_free(cstate);
 out:
 	nfsd4_release_compoundargs(args);
-	cstate_free(cstate);
 	dprintk("nfsv4 compound returned %d\n", ntohl(status));
 	return status;
 }
@@ -1116,8 +1116,7 @@ static struct nfsd4_operation nfsd4_ops[OP_RELEASE_LOCKOWNER+1] = {
 	},
 };
 
-static inline char *
-nfsd4_op_name(unsigned opnum)
+static const char *nfsd4_op_name(unsigned opnum)
 {
 	if (opnum < ARRAY_SIZE(nfsd4_ops))
 		return nfsd4_ops[opnum].op_name;
diff --git a/fs/nfsd/nfsctl.c b/fs/nfsd/nfsctl.c
index 1955a2702e60..c53e65f8f3a2 100644
--- a/fs/nfsd/nfsctl.c
+++ b/fs/nfsd/nfsctl.c
@@ -12,6 +12,7 @@
 #include <linux/time.h>
 #include <linux/errno.h>
 #include <linux/fs.h>
+#include <linux/namei.h>
 #include <linux/fcntl.h>
 #include <linux/net.h>
 #include <linux/in.h>
diff --git a/fs/nfsd/nfsfh.c b/fs/nfsd/nfsfh.c
index f45451eb1e38..ea37c96f0445 100644
--- a/fs/nfsd/nfsfh.c
+++ b/fs/nfsd/nfsfh.c
@@ -51,7 +51,7 @@ static int nfsd_acceptable(void *expv, struct dentry *dentry)
 		/* make sure parents give x permission to user */
 		int err;
 		parent = dget_parent(tdentry);
-		err = permission(parent->d_inode, MAY_EXEC, NULL);
+		err = inode_permission(parent->d_inode, MAY_EXEC);
 		if (err < 0) {
 			dput(parent);
 			break;
diff --git a/fs/nfsd/vfs.c b/fs/nfsd/vfs.c
index 0f4481e0502d..18060bed5267 100644
--- a/fs/nfsd/vfs.c
+++ b/fs/nfsd/vfs.c
@@ -1516,7 +1516,6 @@ nfsd_symlink(struct svc_rqst *rqstp, struct svc_fh *fhp,
 	struct dentry	*dentry, *dnew;
 	__be32		err, cerr;
 	int		host_err;
-	umode_t		mode;
 
 	err = nfserr_noent;
 	if (!flen || !plen)
@@ -1535,11 +1534,6 @@ nfsd_symlink(struct svc_rqst *rqstp, struct svc_fh *fhp,
 	if (IS_ERR(dnew))
 		goto out_nfserr;
 
-	mode = S_IALLUGO;
-	/* Only the MODE ATTRibute is even vaguely meaningful */
-	if (iap && (iap->ia_valid & ATTR_MODE))
-		mode = iap->ia_mode & S_IALLUGO;
-
 	host_err = mnt_want_write(fhp->fh_export->ex_path.mnt);
 	if (host_err)
 		goto out_nfserr;
@@ -1551,11 +1545,11 @@ nfsd_symlink(struct svc_rqst *rqstp, struct svc_fh *fhp,
 		else {
 			strncpy(path_alloced, path, plen);
 			path_alloced[plen] = 0;
-			host_err = vfs_symlink(dentry->d_inode, dnew, path_alloced, mode);
+			host_err = vfs_symlink(dentry->d_inode, dnew, path_alloced);
 			kfree(path_alloced);
 		}
 	} else
-		host_err = vfs_symlink(dentry->d_inode, dnew, path, mode);
+		host_err = vfs_symlink(dentry->d_inode, dnew, path);
 
 	if (!host_err) {
 		if (EX_ISSYNC(fhp->fh_export))
@@ -1959,12 +1953,12 @@ nfsd_permission(struct svc_rqst *rqstp, struct svc_export *exp,
 		return 0;
 
 	/* This assumes  NFSD_MAY_{READ,WRITE,EXEC} == MAY_{READ,WRITE,EXEC} */
-	err = permission(inode, acc & (MAY_READ|MAY_WRITE|MAY_EXEC), NULL);
+	err = inode_permission(inode, acc & (MAY_READ|MAY_WRITE|MAY_EXEC));
 
 	/* Allow read access to binaries even when mode 111 */
 	if (err == -EACCES && S_ISREG(inode->i_mode) &&
 	    acc == (NFSD_MAY_READ | NFSD_MAY_OWNER_OVERRIDE))
-		err = permission(inode, MAY_EXEC, NULL);
+		err = inode_permission(inode, MAY_EXEC);
 
 	return err? nfserrno(err) : 0;
 }
diff --git a/fs/ntfs/aops.c b/fs/ntfs/aops.c
index 00e9ccde8e42..b38f944f0667 100644
--- a/fs/ntfs/aops.c
+++ b/fs/ntfs/aops.c
@@ -1194,7 +1194,7 @@ lock_retry_remap:
 		tbh = bhs[i];
 		if (!tbh)
 			continue;
-		if (unlikely(test_set_buffer_locked(tbh)))
+		if (!trylock_buffer(tbh))
 			BUG();
 		/* The buffer dirty state is now irrelevant, just clean it. */
 		clear_buffer_dirty(tbh);
diff --git a/fs/ntfs/compress.c b/fs/ntfs/compress.c
index 33ff314cc507..9669541d0119 100644
--- a/fs/ntfs/compress.c
+++ b/fs/ntfs/compress.c
@@ -665,7 +665,7 @@ lock_retry_remap:
 	for (i = 0; i < nr_bhs; i++) {
 		struct buffer_head *tbh = bhs[i];
 
-		if (unlikely(test_set_buffer_locked(tbh)))
+		if (!trylock_buffer(tbh))
 			continue;
 		if (unlikely(buffer_uptodate(tbh))) {
 			unlock_buffer(tbh);
diff --git a/fs/ntfs/file.c b/fs/ntfs/file.c
index 3c5550cd11d6..d020866d4232 100644
--- a/fs/ntfs/file.c
+++ b/fs/ntfs/file.c
@@ -2118,7 +2118,7 @@ static ssize_t ntfs_file_aio_write_nolock(struct kiocb *iocb,
 		goto out;
 	if (!count)
 		goto out;
-	err = remove_suid(file->f_path.dentry);
+	err = file_remove_suid(file);
 	if (err)
 		goto out;
 	file_update_time(file);
diff --git a/fs/ntfs/mft.c b/fs/ntfs/mft.c
index 790defb847e7..17d32ca6bc35 100644
--- a/fs/ntfs/mft.c
+++ b/fs/ntfs/mft.c
@@ -586,7 +586,7 @@ int ntfs_sync_mft_mirror(ntfs_volume *vol, const unsigned long mft_no,
 		for (i_bhs = 0; i_bhs < nr_bhs; i_bhs++) {
 			struct buffer_head *tbh = bhs[i_bhs];
 
-			if (unlikely(test_set_buffer_locked(tbh)))
+			if (!trylock_buffer(tbh))
 				BUG();
 			BUG_ON(!buffer_uptodate(tbh));
 			clear_buffer_dirty(tbh);
@@ -779,7 +779,7 @@ int write_mft_record_nolock(ntfs_inode *ni, MFT_RECORD *m, int sync)
 	for (i_bhs = 0; i_bhs < nr_bhs; i_bhs++) {
 		struct buffer_head *tbh = bhs[i_bhs];
 
-		if (unlikely(test_set_buffer_locked(tbh)))
+		if (!trylock_buffer(tbh))
 			BUG();
 		BUG_ON(!buffer_uptodate(tbh));
 		clear_buffer_dirty(tbh);
diff --git a/fs/ntfs/namei.c b/fs/ntfs/namei.c
index e1781c8b1650..9e8a95be7a1e 100644
--- a/fs/ntfs/namei.c
+++ b/fs/ntfs/namei.c
@@ -174,7 +174,6 @@ static struct dentry *ntfs_lookup(struct inode *dir_ino, struct dentry *dent,
 	// TODO: Consider moving this lot to a separate function! (AIA)
 handle_name:
    {
-	struct dentry *real_dent, *new_dent;
 	MFT_RECORD *m;
 	ntfs_attr_search_ctx *ctx;
 	ntfs_inode *ni = NTFS_I(dent_inode);
@@ -255,93 +254,9 @@ handle_name:
 	}
 	nls_name.hash = full_name_hash(nls_name.name, nls_name.len);
 
-	/*
-	 * Note: No need for dent->d_lock lock as i_mutex is held on the
-	 * parent inode.
-	 */
-
-	/* Does a dentry matching the nls_name exist already? */
-	real_dent = d_lookup(dent->d_parent, &nls_name);
-	/* If not, create it now. */
-	if (!real_dent) {
-		real_dent = d_alloc(dent->d_parent, &nls_name);
-		kfree(nls_name.name);
-		if (!real_dent) {
-			err = -ENOMEM;
-			goto err_out;
-		}
-		new_dent = d_splice_alias(dent_inode, real_dent);
-		if (new_dent)
-			dput(real_dent);
-		else
-			new_dent = real_dent;
-		ntfs_debug("Done.  (Created new dentry.)");
-		return new_dent;
-	}
+	dent = d_add_ci(dent, dent_inode, &nls_name);
 	kfree(nls_name.name);
-	/* Matching dentry exists, check if it is negative. */
-	if (real_dent->d_inode) {
-		if (unlikely(real_dent->d_inode != dent_inode)) {
-			/* This can happen because bad inodes are unhashed. */
-			BUG_ON(!is_bad_inode(dent_inode));
-			BUG_ON(!is_bad_inode(real_dent->d_inode));
-		}
-		/*
-		 * Already have the inode and the dentry attached, decrement
-		 * the reference count to balance the ntfs_iget() we did
-		 * earlier on.  We found the dentry using d_lookup() so it
-		 * cannot be disconnected and thus we do not need to worry
-		 * about any NFS/disconnectedness issues here.
-		 */
-		iput(dent_inode);
-		ntfs_debug("Done.  (Already had inode and dentry.)");
-		return real_dent;
-	}
-	/*
-	 * Negative dentry: instantiate it unless the inode is a directory and
-	 * has a 'disconnected' dentry (i.e. IS_ROOT and DCACHE_DISCONNECTED),
-	 * in which case d_move() that in place of the found dentry.
-	 */
-	if (!S_ISDIR(dent_inode->i_mode)) {
-		/* Not a directory; everything is easy. */
-		d_instantiate(real_dent, dent_inode);
-		ntfs_debug("Done.  (Already had negative file dentry.)");
-		return real_dent;
-	}
-	spin_lock(&dcache_lock);
-	if (list_empty(&dent_inode->i_dentry)) {
-		/*
-		 * Directory without a 'disconnected' dentry; we need to do
-		 * d_instantiate() by hand because it takes dcache_lock which
-		 * we already hold.
-		 */
-		list_add(&real_dent->d_alias, &dent_inode->i_dentry);
-		real_dent->d_inode = dent_inode;
-		spin_unlock(&dcache_lock);
-		security_d_instantiate(real_dent, dent_inode);
-		ntfs_debug("Done.  (Already had negative directory dentry.)");
-		return real_dent;
-	}
-	/*
-	 * Directory with a 'disconnected' dentry; get a reference to the
-	 * 'disconnected' dentry.
-	 */
-	new_dent = list_entry(dent_inode->i_dentry.next, struct dentry,
-			d_alias);
-	dget_locked(new_dent);
-	spin_unlock(&dcache_lock);
-	/* Do security vodoo. */
-	security_d_instantiate(real_dent, dent_inode);
-	/* Move new_dent in place of real_dent. */
-	d_move(new_dent, real_dent);
-	/* Balance the ntfs_iget() we did above. */
-	iput(dent_inode);
-	/* Throw away real_dent. */
-	dput(real_dent);
-	/* Use new_dent as the actual dentry. */
-	ntfs_debug("Done.  (Already had negative, disconnected directory "
-			"dentry.)");
-	return new_dent;
+	return dent;
 
 eio_err_out:
 	ntfs_error(vol->sb, "Illegal file name attribute. Run chkdsk.");
diff --git a/fs/ntfs/super.c b/fs/ntfs/super.c
index 3e76f3b216bc..4a46743b5077 100644
--- a/fs/ntfs/super.c
+++ b/fs/ntfs/super.c
@@ -3080,7 +3080,7 @@ struct kmem_cache *ntfs_inode_cache;
 struct kmem_cache *ntfs_big_inode_cache;
 
 /* Init once constructor for the inode slab cache. */
-static void ntfs_big_inode_init_once(struct kmem_cache *cachep, void *foo)
+static void ntfs_big_inode_init_once(void *foo)
 {
 	ntfs_inode *ni = (ntfs_inode *)foo;
 
diff --git a/fs/ntfs/usnjrnl.h b/fs/ntfs/usnjrnl.h
index 3a8af75351e8..4087fbdac327 100644
--- a/fs/ntfs/usnjrnl.h
+++ b/fs/ntfs/usnjrnl.h
@@ -113,7 +113,7 @@ typedef struct {
  * Reason flags (32-bit).  Cumulative flags describing the change(s) to the
  * file since it was last opened.  I think the names speak for themselves but
  * if you disagree check out the descriptions in the Linux NTFS project NTFS
- * documentation: http://linux-ntfs.sourceforge.net/ntfs/files/usnjrnl.html
+ * documentation: http://www.linux-ntfs.org/
  */
 enum {
 	USN_REASON_DATA_OVERWRITE	= const_cpu_to_le32(0x00000001),
@@ -145,7 +145,7 @@ typedef le32 USN_REASON_FLAGS;
  * Source info flags (32-bit).  Information about the source of the change(s)
  * to the file.  For detailed descriptions of what these mean, see the Linux
  * NTFS project NTFS documentation:
- *	http://linux-ntfs.sourceforge.net/ntfs/files/usnjrnl.html
+ *	http://www.linux-ntfs.org/
  */
 enum {
 	USN_SOURCE_DATA_MANAGEMENT	  = const_cpu_to_le32(0x00000001),
diff --git a/fs/ocfs2/aops.c b/fs/ocfs2/aops.c
index 1db080135c6d..506c24fb5078 100644
--- a/fs/ocfs2/aops.c
+++ b/fs/ocfs2/aops.c
@@ -1073,12 +1073,15 @@ static void ocfs2_write_failure(struct inode *inode,
 	for(i = 0; i < wc->w_num_pages; i++) {
 		tmppage = wc->w_pages[i];
 
-		if (ocfs2_should_order_data(inode))
-			walk_page_buffers(wc->w_handle, page_buffers(tmppage),
-					  from, to, NULL,
-					  ocfs2_journal_dirty_data);
-
-		block_commit_write(tmppage, from, to);
+		if (page_has_buffers(tmppage)) {
+			if (ocfs2_should_order_data(inode))
+				walk_page_buffers(wc->w_handle,
+						  page_buffers(tmppage),
+						  from, to, NULL,
+						  ocfs2_journal_dirty_data);
+
+			block_commit_write(tmppage, from, to);
+		}
 	}
 }
 
@@ -1901,12 +1904,14 @@ int ocfs2_write_end_nolock(struct address_space *mapping,
 			to = PAGE_CACHE_SIZE;
 		}
 
-		if (ocfs2_should_order_data(inode))
-			walk_page_buffers(wc->w_handle, page_buffers(tmppage),
-					  from, to, NULL,
-					  ocfs2_journal_dirty_data);
-
-		block_commit_write(tmppage, from, to);
+		if (page_has_buffers(tmppage)) {
+			if (ocfs2_should_order_data(inode))
+				walk_page_buffers(wc->w_handle,
+						  page_buffers(tmppage),
+						  from, to, NULL,
+						  ocfs2_journal_dirty_data);
+			block_commit_write(tmppage, from, to);
+		}
 	}
 
 out_write_size:
diff --git a/fs/ocfs2/cluster/netdebug.c b/fs/ocfs2/cluster/netdebug.c
index d8bfa0eb41b2..52276c02f710 100644
--- a/fs/ocfs2/cluster/netdebug.c
+++ b/fs/ocfs2/cluster/netdebug.c
@@ -138,20 +138,20 @@ static int nst_seq_show(struct seq_file *seq, void *v)
 			   "  message id:   %d\n"
 			   "  message type: %u\n"
 			   "  message key:  0x%08x\n"
-			   "  sock acquiry: %lu.%lu\n"
-			   "  send start:   %lu.%lu\n"
-			   "  wait start:   %lu.%lu\n",
+			   "  sock acquiry: %lu.%ld\n"
+			   "  send start:   %lu.%ld\n"
+			   "  wait start:   %lu.%ld\n",
 			   nst, (unsigned long)nst->st_task->pid,
 			   (unsigned long)nst->st_task->tgid,
 			   nst->st_task->comm, nst->st_node,
 			   nst->st_sc, nst->st_id, nst->st_msg_type,
 			   nst->st_msg_key,
 			   nst->st_sock_time.tv_sec,
-			   (unsigned long)nst->st_sock_time.tv_usec,
+			   (long)nst->st_sock_time.tv_usec,
 			   nst->st_send_time.tv_sec,
-			   (unsigned long)nst->st_send_time.tv_usec,
+			   (long)nst->st_send_time.tv_usec,
 			   nst->st_status_time.tv_sec,
-			   nst->st_status_time.tv_usec);
+			   (long)nst->st_status_time.tv_usec);
 	}
 
 	spin_unlock(&o2net_debug_lock);
@@ -276,7 +276,7 @@ static void *sc_seq_next(struct seq_file *seq, void *v, loff_t *pos)
 	return sc; /* unused, just needs to be null when done */
 }
 
-#define TV_SEC_USEC(TV) TV.tv_sec, (unsigned long)TV.tv_usec
+#define TV_SEC_USEC(TV) TV.tv_sec, (long)TV.tv_usec
 
 static int sc_seq_show(struct seq_file *seq, void *v)
 {
@@ -309,12 +309,12 @@ static int sc_seq_show(struct seq_file *seq, void *v)
 			   "  remote node:     %s\n"
 			   "  page off:        %zu\n"
 			   "  handshake ok:    %u\n"
-			   "  timer:           %lu.%lu\n"
-			   "  data ready:      %lu.%lu\n"
-			   "  advance start:   %lu.%lu\n"
-			   "  advance stop:    %lu.%lu\n"
-			   "  func start:      %lu.%lu\n"
-			   "  func stop:       %lu.%lu\n"
+			   "  timer:           %lu.%ld\n"
+			   "  data ready:      %lu.%ld\n"
+			   "  advance start:   %lu.%ld\n"
+			   "  advance stop:    %lu.%ld\n"
+			   "  func start:      %lu.%ld\n"
+			   "  func stop:       %lu.%ld\n"
 			   "  func key:        %u\n"
 			   "  func type:       %u\n",
 			   sc,
diff --git a/fs/ocfs2/cluster/tcp.c b/fs/ocfs2/cluster/tcp.c
index a27d61581bd6..2bcf706d9dd3 100644
--- a/fs/ocfs2/cluster/tcp.c
+++ b/fs/ocfs2/cluster/tcp.c
@@ -143,8 +143,8 @@ static void o2net_sc_postpone_idle(struct o2net_sock_container *sc);
 static void o2net_sc_reset_idle_timer(struct o2net_sock_container *sc);
 
 #ifdef CONFIG_DEBUG_FS
-void o2net_init_nst(struct o2net_send_tracking *nst, u32 msgtype,
-		    u32 msgkey, struct task_struct *task, u8 node)
+static void o2net_init_nst(struct o2net_send_tracking *nst, u32 msgtype,
+			   u32 msgkey, struct task_struct *task, u8 node)
 {
 	INIT_LIST_HEAD(&nst->st_net_debug_item);
 	nst->st_task = task;
@@ -153,31 +153,61 @@ void o2net_init_nst(struct o2net_send_tracking *nst, u32 msgtype,
 	nst->st_node = node;
 }
 
-void o2net_set_nst_sock_time(struct o2net_send_tracking *nst)
+static void o2net_set_nst_sock_time(struct o2net_send_tracking *nst)
 {
 	do_gettimeofday(&nst->st_sock_time);
 }
 
-void o2net_set_nst_send_time(struct o2net_send_tracking *nst)
+static void o2net_set_nst_send_time(struct o2net_send_tracking *nst)
 {
 	do_gettimeofday(&nst->st_send_time);
 }
 
-void o2net_set_nst_status_time(struct o2net_send_tracking *nst)
+static void o2net_set_nst_status_time(struct o2net_send_tracking *nst)
 {
 	do_gettimeofday(&nst->st_status_time);
 }
 
-void o2net_set_nst_sock_container(struct o2net_send_tracking *nst,
+static void o2net_set_nst_sock_container(struct o2net_send_tracking *nst,
 					 struct o2net_sock_container *sc)
 {
 	nst->st_sc = sc;
 }
 
-void o2net_set_nst_msg_id(struct o2net_send_tracking *nst, u32 msg_id)
+static void o2net_set_nst_msg_id(struct o2net_send_tracking *nst, u32 msg_id)
 {
 	nst->st_id = msg_id;
 }
+
+#else  /* CONFIG_DEBUG_FS */
+
+static inline void o2net_init_nst(struct o2net_send_tracking *nst, u32 msgtype,
+				  u32 msgkey, struct task_struct *task, u8 node)
+{
+}
+
+static inline void o2net_set_nst_sock_time(struct o2net_send_tracking *nst)
+{
+}
+
+static inline void o2net_set_nst_send_time(struct o2net_send_tracking *nst)
+{
+}
+
+static inline void o2net_set_nst_status_time(struct o2net_send_tracking *nst)
+{
+}
+
+static inline void o2net_set_nst_sock_container(struct o2net_send_tracking *nst,
+						struct o2net_sock_container *sc)
+{
+}
+
+static inline void o2net_set_nst_msg_id(struct o2net_send_tracking *nst,
+					u32 msg_id)
+{
+}
+
 #endif /* CONFIG_DEBUG_FS */
 
 static inline int o2net_reconnect_delay(void)
diff --git a/fs/ocfs2/cluster/tcp_internal.h b/fs/ocfs2/cluster/tcp_internal.h
index 18307ff81b77..8d58cfe410b1 100644
--- a/fs/ocfs2/cluster/tcp_internal.h
+++ b/fs/ocfs2/cluster/tcp_internal.h
@@ -224,42 +224,10 @@ struct o2net_send_tracking {
 	struct timeval			st_send_time;
 	struct timeval			st_status_time;
 };
-
-void o2net_init_nst(struct o2net_send_tracking *nst, u32 msgtype,
-		    u32 msgkey, struct task_struct *task, u8 node);
-void o2net_set_nst_sock_time(struct o2net_send_tracking *nst);
-void o2net_set_nst_send_time(struct o2net_send_tracking *nst);
-void o2net_set_nst_status_time(struct o2net_send_tracking *nst);
-void o2net_set_nst_sock_container(struct o2net_send_tracking *nst,
-				  struct o2net_sock_container *sc);
-void o2net_set_nst_msg_id(struct o2net_send_tracking *nst, u32 msg_id);
-
 #else
 struct o2net_send_tracking {
 	u32	dummy;
 };
-
-static inline void o2net_init_nst(struct o2net_send_tracking *nst, u32 msgtype,
-				  u32 msgkey, struct task_struct *task, u8 node)
-{
-}
-static inline void o2net_set_nst_sock_time(struct o2net_send_tracking *nst)
-{
-}
-static inline void o2net_set_nst_send_time(struct o2net_send_tracking *nst)
-{
-}
-static inline void o2net_set_nst_status_time(struct o2net_send_tracking *nst)
-{
-}
-static inline void o2net_set_nst_sock_container(struct o2net_send_tracking *nst,
-						struct o2net_sock_container *sc)
-{
-}
-static inline void o2net_set_nst_msg_id(struct o2net_send_tracking *nst,
-					u32 msg_id)
-{
-}
 #endif	/* CONFIG_DEBUG_FS */
 
 #endif /* O2CLUSTER_TCP_INTERNAL_H */
diff --git a/fs/ocfs2/dir.c b/fs/ocfs2/dir.c
index 8a1875848080..9cce563fd627 100644
--- a/fs/ocfs2/dir.c
+++ b/fs/ocfs2/dir.c
@@ -1300,7 +1300,6 @@ static int ocfs2_expand_inline_dir(struct inode *dir, struct buffer_head *di_bh,
 	di->i_size = cpu_to_le64(sb->s_blocksize);
 	di->i_ctime = di->i_mtime = cpu_to_le64(dir->i_ctime.tv_sec);
 	di->i_ctime_nsec = di->i_mtime_nsec = cpu_to_le32(dir->i_ctime.tv_nsec);
-	dir->i_blocks = ocfs2_inode_sector_count(dir);
 
 	/*
 	 * This should never fail as our extent list is empty and all
@@ -1310,9 +1309,15 @@ static int ocfs2_expand_inline_dir(struct inode *dir, struct buffer_head *di_bh,
 				  NULL);
 	if (ret) {
 		mlog_errno(ret);
-		goto out;
+		goto out_commit;
 	}
 
+	/*
+	 * Set i_blocks after the extent insert for the most up to
+	 * date ip_clusters value.
+	 */
+	dir->i_blocks = ocfs2_inode_sector_count(dir);
+
 	ret = ocfs2_journal_dirty(handle, di_bh);
 	if (ret) {
 		mlog_errno(ret);
@@ -1336,7 +1341,7 @@ static int ocfs2_expand_inline_dir(struct inode *dir, struct buffer_head *di_bh,
 					  len, 0, NULL);
 		if (ret) {
 			mlog_errno(ret);
-			goto out;
+			goto out_commit;
 		}
 	}
 
diff --git a/fs/ocfs2/dlm/dlmfs.c b/fs/ocfs2/dlm/dlmfs.c
index e48aba698b77..533a789c3ef8 100644
--- a/fs/ocfs2/dlm/dlmfs.c
+++ b/fs/ocfs2/dlm/dlmfs.c
@@ -267,8 +267,7 @@ static ssize_t dlmfs_file_write(struct file *filp,
 	return writelen;
 }
 
-static void dlmfs_init_once(struct kmem_cache *cachep,
-			    void *foo)
+static void dlmfs_init_once(void *foo)
 {
 	struct dlmfs_inode_private *ip =
 		(struct dlmfs_inode_private *) foo;
diff --git a/fs/ocfs2/file.c b/fs/ocfs2/file.c
index e8514e8b6ce8..ec2ed15c3daa 100644
--- a/fs/ocfs2/file.c
+++ b/fs/ocfs2/file.c
@@ -1176,7 +1176,7 @@ bail:
 	return err;
 }
 
-int ocfs2_permission(struct inode *inode, int mask, struct nameidata *nd)
+int ocfs2_permission(struct inode *inode, int mask)
 {
 	int ret;
 
@@ -1766,8 +1766,8 @@ out_inode_unlock:
 out_rw_unlock:
 	ocfs2_rw_unlock(inode, 1);
 
-	mutex_unlock(&inode->i_mutex);
 out:
+	mutex_unlock(&inode->i_mutex);
 	return ret;
 }
 
diff --git a/fs/ocfs2/file.h b/fs/ocfs2/file.h
index 048ddcaf5c80..1e27b4d017ea 100644
--- a/fs/ocfs2/file.h
+++ b/fs/ocfs2/file.h
@@ -62,8 +62,7 @@ int ocfs2_lock_allocators(struct inode *inode, struct ocfs2_dinode *di,
 int ocfs2_setattr(struct dentry *dentry, struct iattr *attr);
 int ocfs2_getattr(struct vfsmount *mnt, struct dentry *dentry,
 		  struct kstat *stat);
-int ocfs2_permission(struct inode *inode, int mask,
-		     struct nameidata *nd);
+int ocfs2_permission(struct inode *inode, int mask);
 
 int ocfs2_should_update_atime(struct inode *inode,
 			      struct vfsmount *vfsmnt);
diff --git a/fs/ocfs2/journal.c b/fs/ocfs2/journal.c
index a8c19cb3cfdd..c47bc2a809c2 100644
--- a/fs/ocfs2/journal.c
+++ b/fs/ocfs2/journal.c
@@ -57,7 +57,7 @@ static int __ocfs2_recovery_thread(void *arg);
 static int ocfs2_commit_cache(struct ocfs2_super *osb);
 static int ocfs2_wait_on_mount(struct ocfs2_super *osb);
 static int ocfs2_journal_toggle_dirty(struct ocfs2_super *osb,
-				      int dirty);
+				      int dirty, int replayed);
 static int ocfs2_trylock_journal(struct ocfs2_super *osb,
 				 int slot_num);
 static int ocfs2_recover_orphans(struct ocfs2_super *osb,
@@ -562,8 +562,18 @@ done:
 	return status;
 }
 
+static void ocfs2_bump_recovery_generation(struct ocfs2_dinode *di)
+{
+	le32_add_cpu(&(di->id1.journal1.ij_recovery_generation), 1);
+}
+
+static u32 ocfs2_get_recovery_generation(struct ocfs2_dinode *di)
+{
+	return le32_to_cpu(di->id1.journal1.ij_recovery_generation);
+}
+
 static int ocfs2_journal_toggle_dirty(struct ocfs2_super *osb,
-				      int dirty)
+				      int dirty, int replayed)
 {
 	int status;
 	unsigned int flags;
@@ -593,6 +603,9 @@ static int ocfs2_journal_toggle_dirty(struct ocfs2_super *osb,
 		flags &= ~OCFS2_JOURNAL_DIRTY_FL;
 	fe->id1.journal1.ij_flags = cpu_to_le32(flags);
 
+	if (replayed)
+		ocfs2_bump_recovery_generation(fe);
+
 	status = ocfs2_write_block(osb, bh, journal->j_inode);
 	if (status < 0)
 		mlog_errno(status);
@@ -667,7 +680,7 @@ void ocfs2_journal_shutdown(struct ocfs2_super *osb)
 		 * Do not toggle if flush was unsuccessful otherwise
 		 * will leave dirty metadata in a "clean" journal
 		 */
-		status = ocfs2_journal_toggle_dirty(osb, 0);
+		status = ocfs2_journal_toggle_dirty(osb, 0, 0);
 		if (status < 0)
 			mlog_errno(status);
 	}
@@ -710,7 +723,7 @@ static void ocfs2_clear_journal_error(struct super_block *sb,
 	}
 }
 
-int ocfs2_journal_load(struct ocfs2_journal *journal, int local)
+int ocfs2_journal_load(struct ocfs2_journal *journal, int local, int replayed)
 {
 	int status = 0;
 	struct ocfs2_super *osb;
@@ -729,7 +742,7 @@ int ocfs2_journal_load(struct ocfs2_journal *journal, int local)
 
 	ocfs2_clear_journal_error(osb->sb, journal->j_journal, osb->slot_num);
 
-	status = ocfs2_journal_toggle_dirty(osb, 1);
+	status = ocfs2_journal_toggle_dirty(osb, 1, replayed);
 	if (status < 0) {
 		mlog_errno(status);
 		goto done;
@@ -771,7 +784,7 @@ int ocfs2_journal_wipe(struct ocfs2_journal *journal, int full)
 		goto bail;
 	}
 
-	status = ocfs2_journal_toggle_dirty(journal->j_osb, 0);
+	status = ocfs2_journal_toggle_dirty(journal->j_osb, 0, 0);
 	if (status < 0)
 		mlog_errno(status);
 
@@ -1034,6 +1047,12 @@ restart:
 	spin_unlock(&osb->osb_lock);
 	mlog(0, "All nodes recovered\n");
 
+	/* Refresh all journal recovery generations from disk */
+	status = ocfs2_check_journals_nolocks(osb);
+	status = (status == -EROFS) ? 0 : status;
+	if (status < 0)
+		mlog_errno(status);
+
 	ocfs2_super_unlock(osb, 1);
 
 	/* We always run recovery on our own orphan dir - the dead
@@ -1096,6 +1115,42 @@ out:
 	mlog_exit_void();
 }
 
+static int ocfs2_read_journal_inode(struct ocfs2_super *osb,
+				    int slot_num,
+				    struct buffer_head **bh,
+				    struct inode **ret_inode)
+{
+	int status = -EACCES;
+	struct inode *inode = NULL;
+
+	BUG_ON(slot_num >= osb->max_slots);
+
+	inode = ocfs2_get_system_file_inode(osb, JOURNAL_SYSTEM_INODE,
+					    slot_num);
+	if (!inode || is_bad_inode(inode)) {
+		mlog_errno(status);
+		goto bail;
+	}
+	SET_INODE_JOURNAL(inode);
+
+	status = ocfs2_read_block(osb, OCFS2_I(inode)->ip_blkno, bh, 0, inode);
+	if (status < 0) {
+		mlog_errno(status);
+		goto bail;
+	}
+
+	status = 0;
+
+bail:
+	if (inode) {
+		if (status || !ret_inode)
+			iput(inode);
+		else
+			*ret_inode = inode;
+	}
+	return status;
+}
+
 /* Does the actual journal replay and marks the journal inode as
  * clean. Will only replay if the journal inode is marked dirty. */
 static int ocfs2_replay_journal(struct ocfs2_super *osb,
@@ -1109,22 +1164,36 @@ static int ocfs2_replay_journal(struct ocfs2_super *osb,
 	struct ocfs2_dinode *fe;
 	journal_t *journal = NULL;
 	struct buffer_head *bh = NULL;
+	u32 slot_reco_gen;
 
-	inode = ocfs2_get_system_file_inode(osb, JOURNAL_SYSTEM_INODE,
-					    slot_num);
-	if (inode == NULL) {
-		status = -EACCES;
+	status = ocfs2_read_journal_inode(osb, slot_num, &bh, &inode);
+	if (status) {
 		mlog_errno(status);
 		goto done;
 	}
-	if (is_bad_inode(inode)) {
-		status = -EACCES;
-		iput(inode);
-		inode = NULL;
-		mlog_errno(status);
+
+	fe = (struct ocfs2_dinode *)bh->b_data;
+	slot_reco_gen = ocfs2_get_recovery_generation(fe);
+	brelse(bh);
+	bh = NULL;
+
+	/*
+	 * As the fs recovery is asynchronous, there is a small chance that
+	 * another node mounted (and recovered) the slot before the recovery
+	 * thread could get the lock. To handle that, we dirty read the journal
+	 * inode for that slot to get the recovery generation. If it is
+	 * different than what we expected, the slot has been recovered.
+	 * If not, it needs recovery.
+	 */
+	if (osb->slot_recovery_generations[slot_num] != slot_reco_gen) {
+		mlog(0, "Slot %u already recovered (old/new=%u/%u)\n", slot_num,
+		     osb->slot_recovery_generations[slot_num], slot_reco_gen);
+		osb->slot_recovery_generations[slot_num] = slot_reco_gen;
+		status = -EBUSY;
 		goto done;
 	}
-	SET_INODE_JOURNAL(inode);
+
+	/* Continue with recovery as the journal has not yet been recovered */
 
 	status = ocfs2_inode_lock_full(inode, &bh, 1, OCFS2_META_LOCK_RECOVERY);
 	if (status < 0) {
@@ -1138,9 +1207,12 @@ static int ocfs2_replay_journal(struct ocfs2_super *osb,
 	fe = (struct ocfs2_dinode *) bh->b_data;
 
 	flags = le32_to_cpu(fe->id1.journal1.ij_flags);
+	slot_reco_gen = ocfs2_get_recovery_generation(fe);
 
 	if (!(flags & OCFS2_JOURNAL_DIRTY_FL)) {
 		mlog(0, "No recovery required for node %d\n", node_num);
+		/* Refresh recovery generation for the slot */
+		osb->slot_recovery_generations[slot_num] = slot_reco_gen;
 		goto done;
 	}
 
@@ -1188,6 +1260,11 @@ static int ocfs2_replay_journal(struct ocfs2_super *osb,
 	flags &= ~OCFS2_JOURNAL_DIRTY_FL;
 	fe->id1.journal1.ij_flags = cpu_to_le32(flags);
 
+	/* Increment recovery generation to indicate successful recovery */
+	ocfs2_bump_recovery_generation(fe);
+	osb->slot_recovery_generations[slot_num] =
+					ocfs2_get_recovery_generation(fe);
+
 	status = ocfs2_write_block(osb, bh, inode);
 	if (status < 0)
 		mlog_errno(status);
@@ -1252,6 +1329,13 @@ static int ocfs2_recover_node(struct ocfs2_super *osb,
 
 	status = ocfs2_replay_journal(osb, node_num, slot_num);
 	if (status < 0) {
+		if (status == -EBUSY) {
+			mlog(0, "Skipping recovery for slot %u (node %u) "
+			     "as another node has recovered it\n", slot_num,
+			     node_num);
+			status = 0;
+			goto done;
+		}
 		mlog_errno(status);
 		goto done;
 	}
@@ -1334,21 +1418,46 @@ int ocfs2_mark_dead_nodes(struct ocfs2_super *osb)
 {
 	unsigned int node_num;
 	int status, i;
+	u32 gen;
+	struct buffer_head *bh = NULL;
+	struct ocfs2_dinode *di;
 
 	/* This is called with the super block cluster lock, so we
 	 * know that the slot map can't change underneath us. */
 
-	spin_lock(&osb->osb_lock);
 	for (i = 0; i < osb->max_slots; i++) {
-		if (i == osb->slot_num)
+		/* Read journal inode to get the recovery generation */
+		status = ocfs2_read_journal_inode(osb, i, &bh, NULL);
+		if (status) {
+			mlog_errno(status);
+			goto bail;
+		}
+		di = (struct ocfs2_dinode *)bh->b_data;
+		gen = ocfs2_get_recovery_generation(di);
+		brelse(bh);
+		bh = NULL;
+
+		spin_lock(&osb->osb_lock);
+		osb->slot_recovery_generations[i] = gen;
+
+		mlog(0, "Slot %u recovery generation is %u\n", i,
+		     osb->slot_recovery_generations[i]);
+
+		if (i == osb->slot_num) {
+			spin_unlock(&osb->osb_lock);
 			continue;
+		}
 
 		status = ocfs2_slot_to_node_num_locked(osb, i, &node_num);
-		if (status == -ENOENT)
+		if (status == -ENOENT) {
+			spin_unlock(&osb->osb_lock);
 			continue;
+		}
 
-		if (__ocfs2_recovery_map_test(osb, node_num))
+		if (__ocfs2_recovery_map_test(osb, node_num)) {
+			spin_unlock(&osb->osb_lock);
 			continue;
+		}
 		spin_unlock(&osb->osb_lock);
 
 		/* Ok, we have a slot occupied by another node which
@@ -1364,10 +1473,7 @@ int ocfs2_mark_dead_nodes(struct ocfs2_super *osb)
 			mlog_errno(status);
 			goto bail;
 		}
-
-		spin_lock(&osb->osb_lock);
 	}
-	spin_unlock(&osb->osb_lock);
 
 	status = 0;
 bail:
@@ -1603,49 +1709,41 @@ static int ocfs2_commit_thread(void *arg)
 	return 0;
 }
 
-/* Look for a dirty journal without taking any cluster locks. Used for
- * hard readonly access to determine whether the file system journals
- * require recovery. */
+/* Reads all the journal inodes without taking any cluster locks. Used
+ * for hard readonly access to determine whether any journal requires
+ * recovery. Also used to refresh the recovery generation numbers after
+ * a journal has been recovered by another node.
+ */
 int ocfs2_check_journals_nolocks(struct ocfs2_super *osb)
 {
 	int ret = 0;
 	unsigned int slot;
-	struct buffer_head *di_bh;
+	struct buffer_head *di_bh = NULL;
 	struct ocfs2_dinode *di;
-	struct inode *journal = NULL;
+	int journal_dirty = 0;
 
 	for(slot = 0; slot < osb->max_slots; slot++) {
-		journal = ocfs2_get_system_file_inode(osb,
-						      JOURNAL_SYSTEM_INODE,
-						      slot);
-		if (!journal || is_bad_inode(journal)) {
-			ret = -EACCES;
-			mlog_errno(ret);
-			goto out;
-		}
-
-		di_bh = NULL;
-		ret = ocfs2_read_block(osb, OCFS2_I(journal)->ip_blkno, &di_bh,
-				       0, journal);
-		if (ret < 0) {
+		ret = ocfs2_read_journal_inode(osb, slot, &di_bh, NULL);
+		if (ret) {
 			mlog_errno(ret);
 			goto out;
 		}
 
 		di = (struct ocfs2_dinode *) di_bh->b_data;
 
+		osb->slot_recovery_generations[slot] =
+					ocfs2_get_recovery_generation(di);
+
 		if (le32_to_cpu(di->id1.journal1.ij_flags) &
 		    OCFS2_JOURNAL_DIRTY_FL)
-			ret = -EROFS;
+			journal_dirty = 1;
 
 		brelse(di_bh);
-		if (ret)
-			break;
+		di_bh = NULL;
 	}
 
 out:
-	if (journal)
-		iput(journal);
-
+	if (journal_dirty)
+		ret = -EROFS;
 	return ret;
 }
diff --git a/fs/ocfs2/journal.h b/fs/ocfs2/journal.h
index db82be2532ed..2178ebffa05f 100644
--- a/fs/ocfs2/journal.h
+++ b/fs/ocfs2/journal.h
@@ -161,7 +161,8 @@ int    ocfs2_journal_init(struct ocfs2_journal *journal,
 void   ocfs2_journal_shutdown(struct ocfs2_super *osb);
 int    ocfs2_journal_wipe(struct ocfs2_journal *journal,
 			  int full);
-int    ocfs2_journal_load(struct ocfs2_journal *journal, int local);
+int    ocfs2_journal_load(struct ocfs2_journal *journal, int local,
+			  int replayed);
 int    ocfs2_check_journals_nolocks(struct ocfs2_super *osb);
 void   ocfs2_recovery_thread(struct ocfs2_super *osb,
 			     int node_num);
diff --git a/fs/ocfs2/ocfs2.h b/fs/ocfs2/ocfs2.h
index 1cb814be8ef1..7f625f2b1117 100644
--- a/fs/ocfs2/ocfs2.h
+++ b/fs/ocfs2/ocfs2.h
@@ -204,6 +204,8 @@ struct ocfs2_super
 
 	struct ocfs2_slot_info *slot_info;
 
+	u32 *slot_recovery_generations;
+
 	spinlock_t node_map_lock;
 
 	u64 root_blkno;
diff --git a/fs/ocfs2/ocfs2_fs.h b/fs/ocfs2/ocfs2_fs.h
index 3f1945177629..4f619850ccf7 100644
--- a/fs/ocfs2/ocfs2_fs.h
+++ b/fs/ocfs2/ocfs2_fs.h
@@ -660,7 +660,10 @@ struct ocfs2_dinode {
 		struct {		/* Info for journal system
 					   inodes */
 			__le32 ij_flags;	/* Mounted, version, etc. */
-			__le32 ij_pad;
+			__le32 ij_recovery_generation; /* Incremented when the
+							  journal is recovered
+							  after an unclean
+							  shutdown */
 		} journal1;
 	} id1;				/* Inode type dependant 1 */
 /*C0*/	union {
diff --git a/fs/ocfs2/stackglue.c b/fs/ocfs2/stackglue.c
index 10e149ae5e3a..07f348b8d721 100644
--- a/fs/ocfs2/stackglue.c
+++ b/fs/ocfs2/stackglue.c
@@ -97,13 +97,14 @@ static int ocfs2_stack_driver_request(const char *stack_name,
 		goto out;
 	}
 
-	/* Ok, the stack is pinned */
-	p->sp_count++;
 	active_stack = p;
-
 	rc = 0;
 
 out:
+	/* If we found it, pin it */
+	if (!rc)
+		active_stack->sp_count++;
+
 	spin_unlock(&ocfs2_stack_lock);
 	return rc;
 }
diff --git a/fs/ocfs2/super.c b/fs/ocfs2/super.c
index ccecfe5094fa..88255d3f52b4 100644
--- a/fs/ocfs2/super.c
+++ b/fs/ocfs2/super.c
@@ -1118,7 +1118,7 @@ bail:
 	return status;
 }
 
-static void ocfs2_inode_init_once(struct kmem_cache *cachep, void *data)
+static void ocfs2_inode_init_once(void *data)
 {
 	struct ocfs2_inode_info *oi = data;
 
@@ -1442,6 +1442,15 @@ static int ocfs2_initialize_super(struct super_block *sb,
 	}
 	mlog(0, "max_slots for this device: %u\n", osb->max_slots);
 
+	osb->slot_recovery_generations =
+		kcalloc(osb->max_slots, sizeof(*osb->slot_recovery_generations),
+			GFP_KERNEL);
+	if (!osb->slot_recovery_generations) {
+		status = -ENOMEM;
+		mlog_errno(status);
+		goto bail;
+	}
+
 	init_waitqueue_head(&osb->osb_wipe_event);
 	osb->osb_orphan_wipes = kcalloc(osb->max_slots,
 					sizeof(*osb->osb_orphan_wipes),
@@ -1703,7 +1712,7 @@ static int ocfs2_check_volume(struct ocfs2_super *osb)
 	local = ocfs2_mount_local(osb);
 
 	/* will play back anything left in the journal. */
-	status = ocfs2_journal_load(osb->journal, local);
+	status = ocfs2_journal_load(osb->journal, local, dirty);
 	if (status < 0) {
 		mlog(ML_ERROR, "ocfs2 journal load failed! %d\n", status);
 		goto finally;
@@ -1768,6 +1777,7 @@ static void ocfs2_delete_osb(struct ocfs2_super *osb)
 	ocfs2_free_slot_info(osb);
 
 	kfree(osb->osb_orphan_wipes);
+	kfree(osb->slot_recovery_generations);
 	/* FIXME
 	 * This belongs in journal shutdown, but because we have to
 	 * allocate osb->journal at the start of ocfs2_initalize_osb(),
diff --git a/fs/omfs/Makefile b/fs/omfs/Makefile
new file mode 100644
index 000000000000..8b82b63f1129
--- /dev/null
+++ b/fs/omfs/Makefile
@@ -0,0 +1,4 @@
+
+obj-$(CONFIG_OMFS_FS) += omfs.o
+
+omfs-y := bitmap.o dir.o file.o inode.o
diff --git a/fs/omfs/bitmap.c b/fs/omfs/bitmap.c
new file mode 100644
index 000000000000..e1c0ec0ae989
--- /dev/null
+++ b/fs/omfs/bitmap.c
@@ -0,0 +1,193 @@
+#include <linux/kernel.h>
+#include <linux/fs.h>
+#include <linux/buffer_head.h>
+#include <asm/div64.h>
+#include "omfs.h"
+
+unsigned long omfs_count_free(struct super_block *sb)
+{
+	unsigned int i;
+	unsigned long sum = 0;
+	struct omfs_sb_info *sbi = OMFS_SB(sb);
+	int nbits = sb->s_blocksize * 8;
+
+	for (i = 0; i < sbi->s_imap_size; i++)
+		sum += nbits - bitmap_weight(sbi->s_imap[i], nbits);
+
+	return sum;
+}
+
+/*
+ *  Counts the run of zero bits starting at bit up to max.
+ *  It handles the case where a run might spill over a buffer.
+ *  Called with bitmap lock.
+ */
+static int count_run(unsigned long **addr, int nbits,
+		int addrlen, int bit, int max)
+{
+	int count = 0;
+	int x;
+
+	for (; addrlen > 0; addrlen--, addr++) {
+		x = find_next_bit(*addr, nbits, bit);
+		count += x - bit;
+
+		if (x < nbits || count > max)
+			return min(count, max);
+
+		bit = 0;
+	}
+	return min(count, max);
+}
+
+/*
+ * Sets or clears the run of count bits starting with bit.
+ * Called with bitmap lock.
+ */
+static int set_run(struct super_block *sb, int map,
+		int nbits, int bit, int count, int set)
+{
+	int i;
+	int err;
+	struct buffer_head *bh;
+	struct omfs_sb_info *sbi = OMFS_SB(sb);
+
+ 	err = -ENOMEM;
+	bh = sb_bread(sb, clus_to_blk(sbi, sbi->s_bitmap_ino) + map);
+	if (!bh)
+		goto out;
+
+	for (i = 0; i < count; i++, bit++) {
+		if (bit >= nbits) {
+			bit = 0;
+			map++;
+
+			mark_buffer_dirty(bh);
+			brelse(bh);
+			bh = sb_bread(sb,
+				clus_to_blk(sbi, sbi->s_bitmap_ino) + map);
+			if (!bh)
+				goto out;
+		}
+		if (set) {
+			set_bit(bit, sbi->s_imap[map]);
+			set_bit(bit, (unsigned long *)bh->b_data);
+		} else {
+			clear_bit(bit, sbi->s_imap[map]);
+			clear_bit(bit, (unsigned long *)bh->b_data);
+		}
+	}
+	mark_buffer_dirty(bh);
+	brelse(bh);
+	err = 0;
+out:
+	return err;
+}
+
+/*
+ * Tries to allocate exactly one block.  Returns true if sucessful.
+ */
+int omfs_allocate_block(struct super_block *sb, u64 block)
+{
+	struct buffer_head *bh;
+	struct omfs_sb_info *sbi = OMFS_SB(sb);
+	int bits_per_entry = 8 * sb->s_blocksize;
+	unsigned int map, bit;
+	int ret = 0;
+	u64 tmp;
+
+	tmp = block;
+	bit = do_div(tmp, bits_per_entry);
+	map = tmp;
+
+	mutex_lock(&sbi->s_bitmap_lock);
+	if (map >= sbi->s_imap_size || test_and_set_bit(bit, sbi->s_imap[map]))
+		goto out;
+
+	if (sbi->s_bitmap_ino > 0) {
+		bh = sb_bread(sb, clus_to_blk(sbi, sbi->s_bitmap_ino) + map);
+		if (!bh)
+			goto out;
+
+		set_bit(bit, (unsigned long *)bh->b_data);
+		mark_buffer_dirty(bh);
+		brelse(bh);
+	}
+	ret = 1;
+out:
+	mutex_unlock(&sbi->s_bitmap_lock);
+	return ret;
+}
+
+
+/*
+ *  Tries to allocate a set of blocks.	The request size depends on the
+ *  type: for inodes, we must allocate sbi->s_mirrors blocks, and for file
+ *  blocks, we try to allocate sbi->s_clustersize, but can always get away
+ *  with just one block.
+ */
+int omfs_allocate_range(struct super_block *sb,
+			int min_request,
+			int max_request,
+			u64 *return_block,
+			int *return_size)
+{
+	struct omfs_sb_info *sbi = OMFS_SB(sb);
+	int bits_per_entry = 8 * sb->s_blocksize;
+	int ret = 0;
+	int i, run, bit;
+
+	mutex_lock(&sbi->s_bitmap_lock);
+	for (i = 0; i < sbi->s_imap_size; i++) {
+		bit = 0;
+		while (bit < bits_per_entry) {
+			bit = find_next_zero_bit(sbi->s_imap[i], bits_per_entry,
+				bit);
+
+			if (bit == bits_per_entry)
+				break;
+
+			run = count_run(&sbi->s_imap[i], bits_per_entry,
+				sbi->s_imap_size-i, bit, max_request);
+
+			if (run >= min_request)
+				goto found;
+			bit += run;
+		}
+	}
+	ret = -ENOSPC;
+	goto out;
+
+found:
+	*return_block = i * bits_per_entry + bit;
+	*return_size = run;
+	ret = set_run(sb, i, bits_per_entry, bit, run, 1);
+
+out:
+	mutex_unlock(&sbi->s_bitmap_lock);
+	return ret;
+}
+
+/*
+ * Clears count bits starting at a given block.
+ */
+int omfs_clear_range(struct super_block *sb, u64 block, int count)
+{
+	struct omfs_sb_info *sbi = OMFS_SB(sb);
+	int bits_per_entry = 8 * sb->s_blocksize;
+	u64 tmp;
+	unsigned int map, bit;
+	int ret;
+
+	tmp = block;
+	bit = do_div(tmp, bits_per_entry);
+	map = tmp;
+
+	if (map >= sbi->s_imap_size)
+		return 0;
+
+	mutex_lock(&sbi->s_bitmap_lock);
+	ret = set_run(sb, map, bits_per_entry, bit, count, 0);
+	mutex_unlock(&sbi->s_bitmap_lock);
+	return ret;
+}
diff --git a/fs/omfs/dir.c b/fs/omfs/dir.c
new file mode 100644
index 000000000000..c0757e998876
--- /dev/null
+++ b/fs/omfs/dir.c
@@ -0,0 +1,504 @@
+/*
+ * OMFS (as used by RIO Karma) directory operations.
+ * Copyright (C) 2005 Bob Copeland <me@bobcopeland.com>
+ * Released under GPL v2.
+ */
+
+#include <linux/fs.h>
+#include <linux/ctype.h>
+#include <linux/buffer_head.h>
+#include "omfs.h"
+
+static int omfs_hash(const char *name, int namelen, int mod)
+{
+	int i, hash = 0;
+	for (i = 0; i < namelen; i++)
+		hash ^= tolower(name[i]) << (i % 24);
+	return hash % mod;
+}
+
+/*
+ * Finds the bucket for a given name and reads the containing block;
+ * *ofs is set to the offset of the first list entry.
+ */
+static struct buffer_head *omfs_get_bucket(struct inode *dir,
+		const char *name, int namelen, int *ofs)
+{
+	int nbuckets = (dir->i_size - OMFS_DIR_START)/8;
+	int block = clus_to_blk(OMFS_SB(dir->i_sb), dir->i_ino);
+	int bucket = omfs_hash(name, namelen, nbuckets);
+
+	*ofs = OMFS_DIR_START + bucket * 8;
+	return sb_bread(dir->i_sb, block);
+}
+
+static struct buffer_head *omfs_scan_list(struct inode *dir, u64 block,
+				const char *name, int namelen,
+				u64 *prev_block)
+{
+	struct buffer_head *bh;
+	struct omfs_inode *oi;
+	int err = -ENOENT;
+	*prev_block = ~0;
+
+	while (block != ~0) {
+		bh = sb_bread(dir->i_sb,
+			clus_to_blk(OMFS_SB(dir->i_sb), block));
+		if (!bh) {
+			err = -EIO;
+			goto err;
+		}
+
+		oi = (struct omfs_inode *) bh->b_data;
+		if (omfs_is_bad(OMFS_SB(dir->i_sb), &oi->i_head, block)) {
+			brelse(bh);
+			goto err;
+		}
+
+		if (strncmp(oi->i_name, name, namelen) == 0)
+			return bh;
+
+		*prev_block = block;
+		block = be64_to_cpu(oi->i_sibling);
+		brelse(bh);
+	}
+err:
+	return ERR_PTR(err);
+}
+
+static struct buffer_head *omfs_find_entry(struct inode *dir,
+					   const char *name, int namelen)
+{
+	struct buffer_head *bh;
+	int ofs;
+	u64 block, dummy;
+
+	bh = omfs_get_bucket(dir, name, namelen, &ofs);
+	if (!bh)
+		return ERR_PTR(-EIO);
+
+	block = be64_to_cpu(*((__be64 *) &bh->b_data[ofs]));
+	brelse(bh);
+
+	return omfs_scan_list(dir, block, name, namelen, &dummy);
+}
+
+int omfs_make_empty(struct inode *inode, struct super_block *sb)
+{
+	struct omfs_sb_info *sbi = OMFS_SB(sb);
+	int block = clus_to_blk(sbi, inode->i_ino);
+	struct buffer_head *bh;
+	struct omfs_inode *oi;
+
+	bh = sb_bread(sb, block);
+	if (!bh)
+		return -ENOMEM;
+
+	memset(bh->b_data, 0, sizeof(struct omfs_inode));
+
+	if (inode->i_mode & S_IFDIR) {
+		memset(&bh->b_data[OMFS_DIR_START], 0xff,
+			sbi->s_sys_blocksize - OMFS_DIR_START);
+	} else
+		omfs_make_empty_table(bh, OMFS_EXTENT_START);
+
+	oi = (struct omfs_inode *) bh->b_data;
+	oi->i_head.h_self = cpu_to_be64(inode->i_ino);
+	oi->i_sibling = ~cpu_to_be64(0ULL);
+
+	mark_buffer_dirty(bh);
+	brelse(bh);
+	return 0;
+}
+
+static int omfs_add_link(struct dentry *dentry, struct inode *inode)
+{
+	struct inode *dir = dentry->d_parent->d_inode;
+	const char *name = dentry->d_name.name;
+	int namelen = dentry->d_name.len;
+	struct omfs_inode *oi;
+	struct buffer_head *bh;
+	u64 block;
+	__be64 *entry;
+	int ofs;
+
+	/* just prepend to head of queue in proper bucket */
+	bh = omfs_get_bucket(dir, name, namelen, &ofs);
+	if (!bh)
+		goto out;
+
+	entry = (__be64 *) &bh->b_data[ofs];
+	block = be64_to_cpu(*entry);
+	*entry = cpu_to_be64(inode->i_ino);
+	mark_buffer_dirty(bh);
+	brelse(bh);
+
+	/* now set the sibling and parent pointers on the new inode */
+	bh = sb_bread(dir->i_sb, clus_to_blk(OMFS_SB(dir->i_sb), inode->i_ino));
+	if (!bh)
+		goto out;
+
+	oi = (struct omfs_inode *) bh->b_data;
+	memcpy(oi->i_name, name, namelen);
+	memset(oi->i_name + namelen, 0, OMFS_NAMELEN - namelen);
+	oi->i_sibling = cpu_to_be64(block);
+	oi->i_parent = cpu_to_be64(dir->i_ino);
+	mark_buffer_dirty(bh);
+	brelse(bh);
+
+	dir->i_ctime = CURRENT_TIME_SEC;
+
+	/* mark affected inodes dirty to rebuild checksums */
+	mark_inode_dirty(dir);
+	mark_inode_dirty(inode);
+	return 0;
+out:
+	return -ENOMEM;
+}
+
+static int omfs_delete_entry(struct dentry *dentry)
+{
+	struct inode *dir = dentry->d_parent->d_inode;
+	struct inode *dirty;
+	const char *name = dentry->d_name.name;
+	int namelen = dentry->d_name.len;
+	struct omfs_inode *oi;
+	struct buffer_head *bh, *bh2;
+	__be64 *entry, next;
+	u64 block, prev;
+	int ofs;
+	int err = -ENOMEM;
+
+	/* delete the proper node in the bucket's linked list */
+	bh = omfs_get_bucket(dir, name, namelen, &ofs);
+	if (!bh)
+		goto out;
+
+	entry = (__be64 *) &bh->b_data[ofs];
+	block = be64_to_cpu(*entry);
+
+	bh2 = omfs_scan_list(dir, block, name, namelen, &prev);
+	if (IS_ERR(bh2)) {
+		err = PTR_ERR(bh2);
+		goto out_free_bh;
+	}
+
+	oi = (struct omfs_inode *) bh2->b_data;
+	next = oi->i_sibling;
+	brelse(bh2);
+
+	if (prev != ~0) {
+		/* found in middle of list, get list ptr */
+		brelse(bh);
+		bh = sb_bread(dir->i_sb,
+			clus_to_blk(OMFS_SB(dir->i_sb), prev));
+		if (!bh)
+			goto out;
+
+		oi = (struct omfs_inode *) bh->b_data;
+		entry = &oi->i_sibling;
+	}
+
+	*entry = next;
+	mark_buffer_dirty(bh);
+
+	if (prev != ~0) {
+		dirty = omfs_iget(dir->i_sb, prev);
+		if (!IS_ERR(dirty)) {
+			mark_inode_dirty(dirty);
+			iput(dirty);
+		}
+	}
+
+	err = 0;
+out_free_bh:
+	brelse(bh);
+out:
+	return err;
+}
+
+static int omfs_dir_is_empty(struct inode *inode)
+{
+	int nbuckets = (inode->i_size - OMFS_DIR_START) / 8;
+	struct buffer_head *bh;
+	u64 *ptr;
+	int i;
+
+	bh = sb_bread(inode->i_sb, clus_to_blk(OMFS_SB(inode->i_sb),
+			inode->i_ino));
+
+	if (!bh)
+		return 0;
+
+	ptr = (u64 *) &bh->b_data[OMFS_DIR_START];
+
+	for (i = 0; i < nbuckets; i++, ptr++)
+		if (*ptr != ~0)
+			break;
+
+	brelse(bh);
+	return *ptr != ~0;
+}
+
+static int omfs_unlink(struct inode *dir, struct dentry *dentry)
+{
+	int ret;
+	struct inode *inode = dentry->d_inode;
+
+	ret = omfs_delete_entry(dentry);
+	if (ret)
+		goto end_unlink;
+
+	inode_dec_link_count(inode);
+	mark_inode_dirty(dir);
+
+end_unlink:
+	return ret;
+}
+
+static int omfs_rmdir(struct inode *dir, struct dentry *dentry)
+{
+	int err = -ENOTEMPTY;
+	struct inode *inode = dentry->d_inode;
+
+	if (omfs_dir_is_empty(inode)) {
+		err = omfs_unlink(dir, dentry);
+		if (!err)
+			inode_dec_link_count(inode);
+	}
+	return err;
+}
+
+static int omfs_add_node(struct inode *dir, struct dentry *dentry, int mode)
+{
+	int err;
+	struct inode *inode = omfs_new_inode(dir, mode);
+
+	if (IS_ERR(inode))
+		return PTR_ERR(inode);
+
+	err = omfs_make_empty(inode, dir->i_sb);
+	if (err)
+		goto out_free_inode;
+
+	err = omfs_add_link(dentry, inode);
+	if (err)
+		goto out_free_inode;
+
+	d_instantiate(dentry, inode);
+	return 0;
+
+out_free_inode:
+	iput(inode);
+	return err;
+}
+
+static int omfs_mkdir(struct inode *dir, struct dentry *dentry, int mode)
+{
+	return omfs_add_node(dir, dentry, mode | S_IFDIR);
+}
+
+static int omfs_create(struct inode *dir, struct dentry *dentry, int mode,
+		struct nameidata *nd)
+{
+	return omfs_add_node(dir, dentry, mode | S_IFREG);
+}
+
+static struct dentry *omfs_lookup(struct inode *dir, struct dentry *dentry,
+				  struct nameidata *nd)
+{
+	struct buffer_head *bh;
+	struct inode *inode = NULL;
+
+	if (dentry->d_name.len > OMFS_NAMELEN)
+		return ERR_PTR(-ENAMETOOLONG);
+
+	bh = omfs_find_entry(dir, dentry->d_name.name, dentry->d_name.len);
+	if (!IS_ERR(bh)) {
+		struct omfs_inode *oi = (struct omfs_inode *)bh->b_data;
+		ino_t ino = be64_to_cpu(oi->i_head.h_self);
+		brelse(bh);
+		inode = omfs_iget(dir->i_sb, ino);
+		if (IS_ERR(inode))
+			return ERR_CAST(inode);
+	}
+	d_add(dentry, inode);
+	return NULL;
+}
+
+/* sanity check block's self pointer */
+int omfs_is_bad(struct omfs_sb_info *sbi, struct omfs_header *header,
+	u64 fsblock)
+{
+	int is_bad;
+	u64 ino = be64_to_cpu(header->h_self);
+	is_bad = ((ino != fsblock) || (ino < sbi->s_root_ino) ||
+		(ino > sbi->s_num_blocks));
+
+	if (is_bad)
+		printk(KERN_WARNING "omfs: bad hash chain detected\n");
+
+	return is_bad;
+}
+
+static int omfs_fill_chain(struct file *filp, void *dirent, filldir_t filldir,
+		u64 fsblock, int hindex)
+{
+	struct inode *dir = filp->f_dentry->d_inode;
+	struct buffer_head *bh;
+	struct omfs_inode *oi;
+	u64 self;
+	int res = 0;
+	unsigned char d_type;
+
+	/* follow chain in this bucket */
+	while (fsblock != ~0) {
+		bh = sb_bread(dir->i_sb, clus_to_blk(OMFS_SB(dir->i_sb),
+				fsblock));
+		if (!bh)
+			goto out;
+
+		oi = (struct omfs_inode *) bh->b_data;
+		if (omfs_is_bad(OMFS_SB(dir->i_sb), &oi->i_head, fsblock)) {
+			brelse(bh);
+			goto out;
+		}
+
+		self = fsblock;
+		fsblock = be64_to_cpu(oi->i_sibling);
+
+		/* skip visited nodes */
+		if (hindex) {
+			hindex--;
+			brelse(bh);
+			continue;
+		}
+
+		d_type = (oi->i_type == OMFS_DIR) ? DT_DIR : DT_REG;
+
+		res = filldir(dirent, oi->i_name, strnlen(oi->i_name,
+			OMFS_NAMELEN), filp->f_pos, self, d_type);
+		if (res == 0)
+			filp->f_pos++;
+		brelse(bh);
+	}
+out:
+	return res;
+}
+
+static int omfs_rename(struct inode *old_dir, struct dentry *old_dentry,
+		struct inode *new_dir, struct dentry *new_dentry)
+{
+	struct inode *new_inode = new_dentry->d_inode;
+	struct inode *old_inode = old_dentry->d_inode;
+	struct buffer_head *bh;
+	int is_dir;
+	int err;
+
+	is_dir = S_ISDIR(old_inode->i_mode);
+
+	if (new_inode) {
+		/* overwriting existing file/dir */
+		err = -ENOTEMPTY;
+		if (is_dir && !omfs_dir_is_empty(new_inode))
+			goto out;
+
+		err = -ENOENT;
+		bh = omfs_find_entry(new_dir, new_dentry->d_name.name,
+			new_dentry->d_name.len);
+		if (IS_ERR(bh))
+			goto out;
+		brelse(bh);
+
+		err = omfs_unlink(new_dir, new_dentry);
+		if (err)
+			goto out;
+	}
+
+	/* since omfs locates files by name, we need to unlink _before_
+	 * adding the new link or we won't find the old one */
+	inode_inc_link_count(old_inode);
+	err = omfs_unlink(old_dir, old_dentry);
+	if (err) {
+		inode_dec_link_count(old_inode);
+		goto out;
+	}
+
+	err = omfs_add_link(new_dentry, old_inode);
+	if (err)
+		goto out;
+
+	old_inode->i_ctime = CURRENT_TIME_SEC;
+out:
+	return err;
+}
+
+static int omfs_readdir(struct file *filp, void *dirent, filldir_t filldir)
+{
+	struct inode *dir = filp->f_dentry->d_inode;
+	struct buffer_head *bh;
+	loff_t offset, res;
+	unsigned int hchain, hindex;
+	int nbuckets;
+	u64 fsblock;
+	int ret = -EINVAL;
+
+	if (filp->f_pos >> 32)
+		goto success;
+
+	switch ((unsigned long) filp->f_pos) {
+	case 0:
+		if (filldir(dirent, ".", 1, 0, dir->i_ino, DT_DIR) < 0)
+			goto success;
+		filp->f_pos++;
+		/* fall through */
+	case 1:
+		if (filldir(dirent, "..", 2, 1,
+		    parent_ino(filp->f_dentry), DT_DIR) < 0)
+			goto success;
+		filp->f_pos = 1 << 20;
+		/* fall through */
+	}
+
+	nbuckets = (dir->i_size - OMFS_DIR_START) / 8;
+
+	/* high 12 bits store bucket + 1 and low 20 bits store hash index */
+	hchain = (filp->f_pos >> 20) - 1;
+	hindex = filp->f_pos & 0xfffff;
+
+	bh = sb_bread(dir->i_sb, clus_to_blk(OMFS_SB(dir->i_sb), dir->i_ino));
+	if (!bh)
+		goto out;
+
+	offset = OMFS_DIR_START + hchain * 8;
+
+	for (; hchain < nbuckets; hchain++, offset += 8) {
+		fsblock = be64_to_cpu(*((__be64 *) &bh->b_data[offset]));
+
+		res = omfs_fill_chain(filp, dirent, filldir, fsblock, hindex);
+		hindex = 0;
+		if (res < 0)
+			break;
+
+		filp->f_pos = (hchain+2) << 20;
+	}
+	brelse(bh);
+success:
+	ret = 0;
+out:
+	return ret;
+}
+
+struct inode_operations omfs_dir_inops = {
+	.lookup = omfs_lookup,
+	.mkdir = omfs_mkdir,
+	.rename = omfs_rename,
+	.create = omfs_create,
+	.unlink = omfs_unlink,
+	.rmdir = omfs_rmdir,
+};
+
+struct file_operations omfs_dir_operations = {
+	.read = generic_read_dir,
+	.readdir = omfs_readdir,
+};
diff --git a/fs/omfs/file.c b/fs/omfs/file.c
new file mode 100644
index 000000000000..834b2331f6b3
--- /dev/null
+++ b/fs/omfs/file.c
@@ -0,0 +1,365 @@
+/*
+ * OMFS (as used by RIO Karma) file operations.
+ * Copyright (C) 2005 Bob Copeland <me@bobcopeland.com>
+ * Released under GPL v2.
+ */
+
+#include <linux/version.h>
+#include <linux/module.h>
+#include <linux/fs.h>
+#include <linux/buffer_head.h>
+#include <linux/mpage.h>
+#include "omfs.h"
+
+static int omfs_sync_file(struct file *file, struct dentry *dentry,
+		int datasync)
+{
+	struct inode *inode = dentry->d_inode;
+	int err;
+
+	err = sync_mapping_buffers(inode->i_mapping);
+	if (!(inode->i_state & I_DIRTY))
+		return err;
+	if (datasync && !(inode->i_state & I_DIRTY_DATASYNC))
+		return err;
+	err |= omfs_sync_inode(inode);
+	return err ? -EIO : 0;
+}
+
+static u32 omfs_max_extents(struct omfs_sb_info *sbi, int offset)
+{
+	return (sbi->s_sys_blocksize - offset -
+		sizeof(struct omfs_extent)) /
+		sizeof(struct omfs_extent_entry) + 1;
+}
+
+void omfs_make_empty_table(struct buffer_head *bh, int offset)
+{
+	struct omfs_extent *oe = (struct omfs_extent *) &bh->b_data[offset];
+
+	oe->e_next = ~cpu_to_be64(0ULL);
+	oe->e_extent_count = cpu_to_be32(1),
+	oe->e_fill = cpu_to_be32(0x22),
+	oe->e_entry.e_cluster = ~cpu_to_be64(0ULL);
+	oe->e_entry.e_blocks = ~cpu_to_be64(0ULL);
+}
+
+int omfs_shrink_inode(struct inode *inode)
+{
+	struct omfs_sb_info *sbi = OMFS_SB(inode->i_sb);
+	struct omfs_extent *oe;
+	struct omfs_extent_entry *entry;
+	struct buffer_head *bh;
+	u64 next, last;
+	u32 extent_count;
+	u32 max_extents;
+	int ret;
+
+	/* traverse extent table, freeing each entry that is greater
+	 * than inode->i_size;
+	 */
+	next = inode->i_ino;
+
+	/* only support truncate -> 0 for now */
+	ret = -EIO;
+	if (inode->i_size != 0)
+		goto out;
+
+	bh = sb_bread(inode->i_sb, clus_to_blk(sbi, next));
+	if (!bh)
+		goto out;
+
+	oe = (struct omfs_extent *)(&bh->b_data[OMFS_EXTENT_START]);
+	max_extents = omfs_max_extents(sbi, OMFS_EXTENT_START);
+
+	for (;;) {
+
+		if (omfs_is_bad(sbi, (struct omfs_header *) bh->b_data, next))
+			goto out_brelse;
+
+		extent_count = be32_to_cpu(oe->e_extent_count);
+
+		if (extent_count > max_extents)
+			goto out_brelse;
+
+		last = next;
+		next = be64_to_cpu(oe->e_next);
+		entry = &oe->e_entry;
+
+		/* ignore last entry as it is the terminator */
+		for (; extent_count > 1; extent_count--) {
+			u64 start, count;
+			start = be64_to_cpu(entry->e_cluster);
+			count = be64_to_cpu(entry->e_blocks);
+
+			omfs_clear_range(inode->i_sb, start, (int) count);
+			entry++;
+		}
+		omfs_make_empty_table(bh, (char *) oe - bh->b_data);
+		mark_buffer_dirty(bh);
+		brelse(bh);
+
+		if (last != inode->i_ino)
+			omfs_clear_range(inode->i_sb, last, sbi->s_mirrors);
+
+		if (next == ~0)
+			break;
+
+		bh = sb_bread(inode->i_sb, clus_to_blk(sbi, next));
+		if (!bh)
+			goto out;
+		oe = (struct omfs_extent *) (&bh->b_data[OMFS_EXTENT_CONT]);
+		max_extents = omfs_max_extents(sbi, OMFS_EXTENT_CONT);
+	}
+	ret = 0;
+out:
+	return ret;
+out_brelse:
+	brelse(bh);
+	return ret;
+}
+
+static void omfs_truncate(struct inode *inode)
+{
+	omfs_shrink_inode(inode);
+	mark_inode_dirty(inode);
+}
+
+/*
+ * Add new blocks to the current extent, or create new entries/continuations
+ * as necessary.
+ */
+static int omfs_grow_extent(struct inode *inode, struct omfs_extent *oe,
+			u64 *ret_block)
+{
+	struct omfs_extent_entry *terminator;
+	struct omfs_extent_entry *entry = &oe->e_entry;
+	struct omfs_sb_info *sbi = OMFS_SB(inode->i_sb);
+	u32 extent_count = be32_to_cpu(oe->e_extent_count);
+	u64 new_block = 0;
+	u32 max_count;
+	int new_count;
+	int ret = 0;
+
+	/* reached the end of the extent table with no blocks mapped.
+	 * there are three possibilities for adding: grow last extent,
+	 * add a new extent to the current extent table, and add a
+	 * continuation inode.  in last two cases need an allocator for
+	 * sbi->s_cluster_size
+	 */
+
+	/* TODO: handle holes */
+
+	/* should always have a terminator */
+	if (extent_count < 1)
+		return -EIO;
+
+	/* trivially grow current extent, if next block is not taken */
+	terminator = entry + extent_count - 1;
+	if (extent_count > 1) {
+		entry = terminator-1;
+		new_block = be64_to_cpu(entry->e_cluster) +
+			be64_to_cpu(entry->e_blocks);
+
+		if (omfs_allocate_block(inode->i_sb, new_block)) {
+			entry->e_blocks =
+				cpu_to_be64(be64_to_cpu(entry->e_blocks) + 1);
+			terminator->e_blocks = ~(cpu_to_be64(
+				be64_to_cpu(~terminator->e_blocks) + 1));
+			goto out;
+		}
+	}
+	max_count = omfs_max_extents(sbi, OMFS_EXTENT_START);
+
+	/* TODO: add a continuation block here */
+	if (be32_to_cpu(oe->e_extent_count) > max_count-1)
+		return -EIO;
+
+	/* try to allocate a new cluster */
+	ret = omfs_allocate_range(inode->i_sb, 1, sbi->s_clustersize,
+		&new_block, &new_count);
+	if (ret)
+		goto out_fail;
+
+	/* copy terminator down an entry */
+	entry = terminator;
+	terminator++;
+	memcpy(terminator, entry, sizeof(struct omfs_extent_entry));
+
+	entry->e_cluster = cpu_to_be64(new_block);
+	entry->e_blocks = cpu_to_be64((u64) new_count);
+
+	terminator->e_blocks = ~(cpu_to_be64(
+		be64_to_cpu(~terminator->e_blocks) + (u64) new_count));
+
+	/* write in new entry */
+	oe->e_extent_count = cpu_to_be32(1 + be32_to_cpu(oe->e_extent_count));
+
+out:
+	*ret_block = new_block;
+out_fail:
+	return ret;
+}
+
+/*
+ * Scans across the directory table for a given file block number.
+ * If block not found, return 0.
+ */
+static sector_t find_block(struct inode *inode, struct omfs_extent_entry *ent,
+			sector_t block, int count, int *left)
+{
+	/* count > 1 because of terminator */
+	sector_t searched = 0;
+	for (; count > 1; count--) {
+		int numblocks = clus_to_blk(OMFS_SB(inode->i_sb),
+			be64_to_cpu(ent->e_blocks));
+
+		if (block >= searched  &&
+		    block < searched + numblocks) {
+			/*
+			 * found it at cluster + (block - searched)
+			 * numblocks - (block - searched) is remainder
+			 */
+			*left = numblocks - (block - searched);
+			return clus_to_blk(OMFS_SB(inode->i_sb),
+				be64_to_cpu(ent->e_cluster)) +
+				block - searched;
+		}
+		searched += numblocks;
+		ent++;
+	}
+	return 0;
+}
+
+static int omfs_get_block(struct inode *inode, sector_t block,
+			  struct buffer_head *bh_result, int create)
+{
+	struct buffer_head *bh;
+	sector_t next, offset;
+	int ret;
+	u64 new_block;
+	u32 max_extents;
+	int extent_count;
+	struct omfs_extent *oe;
+	struct omfs_extent_entry *entry;
+	struct omfs_sb_info *sbi = OMFS_SB(inode->i_sb);
+	int max_blocks = bh_result->b_size >> inode->i_blkbits;
+	int remain;
+
+	ret = -EIO;
+	bh = sb_bread(inode->i_sb, clus_to_blk(sbi, inode->i_ino));
+	if (!bh)
+		goto out;
+
+	oe = (struct omfs_extent *)(&bh->b_data[OMFS_EXTENT_START]);
+	max_extents = omfs_max_extents(sbi, OMFS_EXTENT_START);
+	next = inode->i_ino;
+
+	for (;;) {
+
+		if (omfs_is_bad(sbi, (struct omfs_header *) bh->b_data, next))
+			goto out_brelse;
+
+		extent_count = be32_to_cpu(oe->e_extent_count);
+		next = be64_to_cpu(oe->e_next);
+		entry = &oe->e_entry;
+
+		if (extent_count > max_extents)
+			goto out_brelse;
+
+		offset = find_block(inode, entry, block, extent_count, &remain);
+		if (offset > 0) {
+			ret = 0;
+			map_bh(bh_result, inode->i_sb, offset);
+			if (remain > max_blocks)
+				remain = max_blocks;
+			bh_result->b_size = (remain << inode->i_blkbits);
+			goto out_brelse;
+		}
+		if (next == ~0)
+			break;
+
+		brelse(bh);
+		bh = sb_bread(inode->i_sb, clus_to_blk(sbi, next));
+		if (!bh)
+			goto out;
+		oe = (struct omfs_extent *) (&bh->b_data[OMFS_EXTENT_CONT]);
+		max_extents = omfs_max_extents(sbi, OMFS_EXTENT_CONT);
+	}
+	if (create) {
+		ret = omfs_grow_extent(inode, oe, &new_block);
+		if (ret == 0) {
+			mark_buffer_dirty(bh);
+			mark_inode_dirty(inode);
+			map_bh(bh_result, inode->i_sb,
+					clus_to_blk(sbi, new_block));
+		}
+	}
+out_brelse:
+	brelse(bh);
+out:
+	return ret;
+}
+
+static int omfs_readpage(struct file *file, struct page *page)
+{
+	return block_read_full_page(page, omfs_get_block);
+}
+
+static int omfs_readpages(struct file *file, struct address_space *mapping,
+		struct list_head *pages, unsigned nr_pages)
+{
+	return mpage_readpages(mapping, pages, nr_pages, omfs_get_block);
+}
+
+static int omfs_writepage(struct page *page, struct writeback_control *wbc)
+{
+	return block_write_full_page(page, omfs_get_block, wbc);
+}
+
+static int
+omfs_writepages(struct address_space *mapping, struct writeback_control *wbc)
+{
+	return mpage_writepages(mapping, wbc, omfs_get_block);
+}
+
+static int omfs_write_begin(struct file *file, struct address_space *mapping,
+			loff_t pos, unsigned len, unsigned flags,
+			struct page **pagep, void **fsdata)
+{
+	*pagep = NULL;
+	return block_write_begin(file, mapping, pos, len, flags,
+				pagep, fsdata, omfs_get_block);
+}
+
+static sector_t omfs_bmap(struct address_space *mapping, sector_t block)
+{
+	return generic_block_bmap(mapping, block, omfs_get_block);
+}
+
+struct file_operations omfs_file_operations = {
+	.llseek = generic_file_llseek,
+	.read = do_sync_read,
+	.write = do_sync_write,
+	.aio_read = generic_file_aio_read,
+	.aio_write = generic_file_aio_write,
+	.mmap = generic_file_mmap,
+	.fsync = omfs_sync_file,
+	.splice_read = generic_file_splice_read,
+};
+
+struct inode_operations omfs_file_inops = {
+	.truncate = omfs_truncate
+};
+
+struct address_space_operations omfs_aops = {
+	.readpage = omfs_readpage,
+	.readpages = omfs_readpages,
+	.writepage = omfs_writepage,
+	.writepages = omfs_writepages,
+	.sync_page = block_sync_page,
+	.write_begin = omfs_write_begin,
+	.write_end = generic_write_end,
+	.bmap = omfs_bmap,
+};
+
diff --git a/fs/omfs/inode.c b/fs/omfs/inode.c
new file mode 100644
index 000000000000..d29047b1b9b0
--- /dev/null
+++ b/fs/omfs/inode.c
@@ -0,0 +1,553 @@
+/*
+ * Optimized MPEG FS - inode and super operations.
+ * Copyright (C) 2006 Bob Copeland <me@bobcopeland.com>
+ * Released under GPL v2.
+ */
+#include <linux/version.h>
+#include <linux/module.h>
+#include <linux/sched.h>
+#include <linux/fs.h>
+#include <linux/vfs.h>
+#include <linux/parser.h>
+#include <linux/buffer_head.h>
+#include <linux/vmalloc.h>
+#include <linux/crc-itu-t.h>
+#include "omfs.h"
+
+MODULE_AUTHOR("Bob Copeland <me@bobcopeland.com>");
+MODULE_DESCRIPTION("OMFS (ReplayTV/Karma) Filesystem for Linux");
+MODULE_LICENSE("GPL");
+
+struct inode *omfs_new_inode(struct inode *dir, int mode)
+{
+	struct inode *inode;
+	u64 new_block;
+	int err;
+	int len;
+	struct omfs_sb_info *sbi = OMFS_SB(dir->i_sb);
+
+	inode = new_inode(dir->i_sb);
+	if (!inode)
+		return ERR_PTR(-ENOMEM);
+
+	err = omfs_allocate_range(dir->i_sb, sbi->s_mirrors, sbi->s_mirrors,
+			&new_block, &len);
+	if (err)
+		goto fail;
+
+	inode->i_ino = new_block;
+	inode->i_mode = mode;
+	inode->i_uid = current->fsuid;
+	inode->i_gid = current->fsgid;
+	inode->i_blocks = 0;
+	inode->i_mapping->a_ops = &omfs_aops;
+
+	inode->i_atime = inode->i_mtime = inode->i_ctime = CURRENT_TIME;
+	switch (mode & S_IFMT) {
+	case S_IFDIR:
+		inode->i_op = &omfs_dir_inops;
+		inode->i_fop = &omfs_dir_operations;
+		inode->i_size = sbi->s_sys_blocksize;
+		inc_nlink(inode);
+		break;
+	case S_IFREG:
+		inode->i_op = &omfs_file_inops;
+		inode->i_fop = &omfs_file_operations;
+		inode->i_size = 0;
+		break;
+	}
+
+	insert_inode_hash(inode);
+	mark_inode_dirty(inode);
+	return inode;
+fail:
+	make_bad_inode(inode);
+	iput(inode);
+	return ERR_PTR(err);
+}
+
+/*
+ * Update the header checksums for a dirty inode based on its contents.
+ * Caller is expected to hold the buffer head underlying oi and mark it
+ * dirty.
+ */
+static void omfs_update_checksums(struct omfs_inode *oi)
+{
+	int xor, i, ofs = 0, count;
+	u16 crc = 0;
+	unsigned char *ptr = (unsigned char *) oi;
+
+	count = be32_to_cpu(oi->i_head.h_body_size);
+	ofs = sizeof(struct omfs_header);
+
+	crc = crc_itu_t(crc, ptr + ofs, count);
+	oi->i_head.h_crc = cpu_to_be16(crc);
+
+	xor = ptr[0];
+	for (i = 1; i < OMFS_XOR_COUNT; i++)
+		xor ^= ptr[i];
+
+	oi->i_head.h_check_xor = xor;
+}
+
+static int omfs_write_inode(struct inode *inode, int wait)
+{
+	struct omfs_inode *oi;
+	struct omfs_sb_info *sbi = OMFS_SB(inode->i_sb);
+	struct buffer_head *bh, *bh2;
+	unsigned int block;
+	u64 ctime;
+	int i;
+	int ret = -EIO;
+	int sync_failed = 0;
+
+	/* get current inode since we may have written sibling ptrs etc. */
+	block = clus_to_blk(sbi, inode->i_ino);
+	bh = sb_bread(inode->i_sb, block);
+	if (!bh)
+		goto out;
+
+	oi = (struct omfs_inode *) bh->b_data;
+
+	oi->i_head.h_self = cpu_to_be64(inode->i_ino);
+	if (S_ISDIR(inode->i_mode))
+		oi->i_type = OMFS_DIR;
+	else if (S_ISREG(inode->i_mode))
+		oi->i_type = OMFS_FILE;
+	else {
+		printk(KERN_WARNING "omfs: unknown file type: %d\n",
+			inode->i_mode);
+		goto out_brelse;
+	}
+
+	oi->i_head.h_body_size = cpu_to_be32(sbi->s_sys_blocksize -
+		sizeof(struct omfs_header));
+	oi->i_head.h_version = 1;
+	oi->i_head.h_type = OMFS_INODE_NORMAL;
+	oi->i_head.h_magic = OMFS_IMAGIC;
+	oi->i_size = cpu_to_be64(inode->i_size);
+
+	ctime = inode->i_ctime.tv_sec * 1000LL +
+		((inode->i_ctime.tv_nsec + 999)/1000);
+	oi->i_ctime = cpu_to_be64(ctime);
+
+	omfs_update_checksums(oi);
+
+	mark_buffer_dirty(bh);
+	if (wait) {
+		sync_dirty_buffer(bh);
+		if (buffer_req(bh) && !buffer_uptodate(bh))
+			sync_failed = 1;
+	}
+
+	/* if mirroring writes, copy to next fsblock */
+	for (i = 1; i < sbi->s_mirrors; i++) {
+		bh2 = sb_bread(inode->i_sb, block + i *
+			(sbi->s_blocksize / sbi->s_sys_blocksize));
+		if (!bh2)
+			goto out_brelse;
+
+		memcpy(bh2->b_data, bh->b_data, bh->b_size);
+		mark_buffer_dirty(bh2);
+		if (wait) {
+			sync_dirty_buffer(bh2);
+			if (buffer_req(bh2) && !buffer_uptodate(bh2))
+				sync_failed = 1;
+		}
+		brelse(bh2);
+	}
+	ret = (sync_failed) ? -EIO : 0;
+out_brelse:
+	brelse(bh);
+out:
+	return ret;
+}
+
+int omfs_sync_inode(struct inode *inode)
+{
+	return omfs_write_inode(inode, 1);
+}
+
+/*
+ * called when an entry is deleted, need to clear the bits in the
+ * bitmaps.
+ */
+static void omfs_delete_inode(struct inode *inode)
+{
+	truncate_inode_pages(&inode->i_data, 0);
+
+	if (S_ISREG(inode->i_mode)) {
+		inode->i_size = 0;
+		omfs_shrink_inode(inode);
+	}
+
+	omfs_clear_range(inode->i_sb, inode->i_ino, 2);
+	clear_inode(inode);
+}
+
+struct inode *omfs_iget(struct super_block *sb, ino_t ino)
+{
+	struct omfs_sb_info *sbi = OMFS_SB(sb);
+	struct omfs_inode *oi;
+	struct buffer_head *bh;
+	unsigned int block;
+	u64 ctime;
+	unsigned long nsecs;
+	struct inode *inode;
+
+	inode = iget_locked(sb, ino);
+	if (!inode)
+		return ERR_PTR(-ENOMEM);
+	if (!(inode->i_state & I_NEW))
+		return inode;
+
+	block = clus_to_blk(sbi, ino);
+	bh = sb_bread(inode->i_sb, block);
+	if (!bh)
+		goto iget_failed;
+
+	oi = (struct omfs_inode *)bh->b_data;
+
+	/* check self */
+	if (ino != be64_to_cpu(oi->i_head.h_self))
+		goto fail_bh;
+
+	inode->i_uid = sbi->s_uid;
+	inode->i_gid = sbi->s_gid;
+
+	ctime = be64_to_cpu(oi->i_ctime);
+	nsecs = do_div(ctime, 1000) * 1000L;
+
+	inode->i_atime.tv_sec = ctime;
+	inode->i_mtime.tv_sec = ctime;
+	inode->i_ctime.tv_sec = ctime;
+	inode->i_atime.tv_nsec = nsecs;
+	inode->i_mtime.tv_nsec = nsecs;
+	inode->i_ctime.tv_nsec = nsecs;
+
+	inode->i_mapping->a_ops = &omfs_aops;
+
+	switch (oi->i_type) {
+	case OMFS_DIR:
+		inode->i_mode = S_IFDIR | (S_IRWXUGO & ~sbi->s_dmask);
+		inode->i_op = &omfs_dir_inops;
+		inode->i_fop = &omfs_dir_operations;
+		inode->i_size = sbi->s_sys_blocksize;
+		inc_nlink(inode);
+		break;
+	case OMFS_FILE:
+		inode->i_mode = S_IFREG | (S_IRWXUGO & ~sbi->s_fmask);
+		inode->i_fop = &omfs_file_operations;
+		inode->i_size = be64_to_cpu(oi->i_size);
+		break;
+	}
+	brelse(bh);
+	unlock_new_inode(inode);
+	return inode;
+fail_bh:
+	brelse(bh);
+iget_failed:
+	iget_failed(inode);
+	return ERR_PTR(-EIO);
+}
+
+static void omfs_put_super(struct super_block *sb)
+{
+	struct omfs_sb_info *sbi = OMFS_SB(sb);
+	kfree(sbi->s_imap);
+	kfree(sbi);
+	sb->s_fs_info = NULL;
+}
+
+static int omfs_statfs(struct dentry *dentry, struct kstatfs *buf)
+{
+	struct super_block *s = dentry->d_sb;
+	struct omfs_sb_info *sbi = OMFS_SB(s);
+	buf->f_type = OMFS_MAGIC;
+	buf->f_bsize = sbi->s_blocksize;
+	buf->f_blocks = sbi->s_num_blocks;
+	buf->f_files = sbi->s_num_blocks;
+	buf->f_namelen = OMFS_NAMELEN;
+
+	buf->f_bfree = buf->f_bavail = buf->f_ffree =
+		omfs_count_free(s);
+	return 0;
+}
+
+static struct super_operations omfs_sops = {
+	.write_inode	= omfs_write_inode,
+	.delete_inode	= omfs_delete_inode,
+	.put_super	= omfs_put_super,
+	.statfs		= omfs_statfs,
+	.show_options	= generic_show_options,
+};
+
+/*
+ * For Rio Karma, there is an on-disk free bitmap whose location is
+ * stored in the root block.  For ReplayTV, there is no such free bitmap
+ * so we have to walk the tree.  Both inodes and file data are allocated
+ * from the same map.  This array can be big (300k) so we allocate
+ * in units of the blocksize.
+ */
+static int omfs_get_imap(struct super_block *sb)
+{
+	int bitmap_size;
+	int array_size;
+	int count;
+	struct omfs_sb_info *sbi = OMFS_SB(sb);
+	struct buffer_head *bh;
+	unsigned long **ptr;
+	sector_t block;
+
+	bitmap_size = DIV_ROUND_UP(sbi->s_num_blocks, 8);
+	array_size = DIV_ROUND_UP(bitmap_size, sb->s_blocksize);
+
+	if (sbi->s_bitmap_ino == ~0ULL)
+		goto out;
+
+	sbi->s_imap_size = array_size;
+	sbi->s_imap = kzalloc(array_size * sizeof(unsigned long *), GFP_KERNEL);
+	if (!sbi->s_imap)
+		goto nomem;
+
+	block = clus_to_blk(sbi, sbi->s_bitmap_ino);
+	ptr = sbi->s_imap;
+	for (count = bitmap_size; count > 0; count -= sb->s_blocksize) {
+		bh = sb_bread(sb, block++);
+		if (!bh)
+			goto nomem_free;
+		*ptr = kmalloc(sb->s_blocksize, GFP_KERNEL);
+		if (!*ptr) {
+			brelse(bh);
+			goto nomem_free;
+		}
+		memcpy(*ptr, bh->b_data, sb->s_blocksize);
+		if (count < sb->s_blocksize)
+			memset((void *)*ptr + count, 0xff,
+				sb->s_blocksize - count);
+		brelse(bh);
+		ptr++;
+	}
+out:
+	return 0;
+
+nomem_free:
+	for (count = 0; count < array_size; count++)
+		kfree(sbi->s_imap[count]);
+
+	kfree(sbi->s_imap);
+nomem:
+	sbi->s_imap = NULL;
+	sbi->s_imap_size = 0;
+	return -ENOMEM;
+}
+
+enum {
+	Opt_uid, Opt_gid, Opt_umask, Opt_dmask, Opt_fmask
+};
+
+static match_table_t tokens = {
+	{Opt_uid, "uid=%u"},
+	{Opt_gid, "gid=%u"},
+	{Opt_umask, "umask=%o"},
+	{Opt_dmask, "dmask=%o"},
+	{Opt_fmask, "fmask=%o"},
+};
+
+static int parse_options(char *options, struct omfs_sb_info *sbi)
+{
+	char *p;
+	substring_t args[MAX_OPT_ARGS];
+	int option;
+
+	if (!options)
+		return 1;
+
+	while ((p = strsep(&options, ",")) != NULL) {
+		int token;
+		if (!*p)
+			continue;
+
+		token = match_token(p, tokens, args);
+		switch (token) {
+		case Opt_uid:
+			if (match_int(&args[0], &option))
+				return 0;
+			sbi->s_uid = option;
+			break;
+		case Opt_gid:
+			if (match_int(&args[0], &option))
+				return 0;
+			sbi->s_gid = option;
+			break;
+		case Opt_umask:
+			if (match_octal(&args[0], &option))
+				return 0;
+			sbi->s_fmask = sbi->s_dmask = option;
+			break;
+		case Opt_dmask:
+			if (match_octal(&args[0], &option))
+				return 0;
+			sbi->s_dmask = option;
+			break;
+		case Opt_fmask:
+			if (match_octal(&args[0], &option))
+				return 0;
+			sbi->s_fmask = option;
+			break;
+		default:
+			return 0;
+		}
+	}
+	return 1;
+}
+
+static int omfs_fill_super(struct super_block *sb, void *data, int silent)
+{
+	struct buffer_head *bh, *bh2;
+	struct omfs_super_block *omfs_sb;
+	struct omfs_root_block *omfs_rb;
+	struct omfs_sb_info *sbi;
+	struct inode *root;
+	sector_t start;
+	int ret = -EINVAL;
+
+	save_mount_options(sb, (char *) data);
+
+	sbi = kzalloc(sizeof(struct omfs_sb_info), GFP_KERNEL);
+	if (!sbi)
+		return -ENOMEM;
+
+	sb->s_fs_info = sbi;
+
+	sbi->s_uid = current->uid;
+	sbi->s_gid = current->gid;
+	sbi->s_dmask = sbi->s_fmask = current->fs->umask;
+
+	if (!parse_options((char *) data, sbi))
+		goto end;
+
+	sb->s_maxbytes = 0xffffffff;
+
+	sb_set_blocksize(sb, 0x200);
+
+	bh = sb_bread(sb, 0);
+	if (!bh)
+		goto end;
+
+	omfs_sb = (struct omfs_super_block *)bh->b_data;
+
+	if (omfs_sb->s_magic != cpu_to_be32(OMFS_MAGIC)) {
+		if (!silent)
+			printk(KERN_ERR "omfs: Invalid superblock (%x)\n",
+				   omfs_sb->s_magic);
+		goto out_brelse_bh;
+	}
+	sb->s_magic = OMFS_MAGIC;
+
+	sbi->s_num_blocks = be64_to_cpu(omfs_sb->s_num_blocks);
+	sbi->s_blocksize = be32_to_cpu(omfs_sb->s_blocksize);
+	sbi->s_mirrors = be32_to_cpu(omfs_sb->s_mirrors);
+	sbi->s_root_ino = be64_to_cpu(omfs_sb->s_root_block);
+	sbi->s_sys_blocksize = be32_to_cpu(omfs_sb->s_sys_blocksize);
+	mutex_init(&sbi->s_bitmap_lock);
+
+	if (sbi->s_sys_blocksize > PAGE_SIZE) {
+		printk(KERN_ERR "omfs: sysblock size (%d) is out of range\n",
+			sbi->s_sys_blocksize);
+		goto out_brelse_bh;
+	}
+
+	if (sbi->s_blocksize < sbi->s_sys_blocksize ||
+	    sbi->s_blocksize > OMFS_MAX_BLOCK_SIZE) {
+		printk(KERN_ERR "omfs: block size (%d) is out of range\n",
+			sbi->s_blocksize);
+		goto out_brelse_bh;
+	}
+
+	/*
+	 * Use sys_blocksize as the fs block since it is smaller than a
+	 * page while the fs blocksize can be larger.
+	 */
+	sb_set_blocksize(sb, sbi->s_sys_blocksize);
+
+	/*
+	 * ...and the difference goes into a shift.  sys_blocksize is always
+	 * a power of two factor of blocksize.
+	 */
+	sbi->s_block_shift = get_bitmask_order(sbi->s_blocksize) -
+		get_bitmask_order(sbi->s_sys_blocksize);
+
+	start = clus_to_blk(sbi, be64_to_cpu(omfs_sb->s_root_block));
+	bh2 = sb_bread(sb, start);
+	if (!bh2)
+		goto out_brelse_bh;
+
+	omfs_rb = (struct omfs_root_block *)bh2->b_data;
+
+	sbi->s_bitmap_ino = be64_to_cpu(omfs_rb->r_bitmap);
+	sbi->s_clustersize = be32_to_cpu(omfs_rb->r_clustersize);
+
+	if (sbi->s_num_blocks != be64_to_cpu(omfs_rb->r_num_blocks)) {
+		printk(KERN_ERR "omfs: block count discrepancy between "
+			"super and root blocks (%llx, %llx)\n",
+			(unsigned long long)sbi->s_num_blocks,
+			(unsigned long long)be64_to_cpu(omfs_rb->r_num_blocks));
+		goto out_brelse_bh2;
+	}
+
+	ret = omfs_get_imap(sb);
+	if (ret)
+		goto out_brelse_bh2;
+
+	sb->s_op = &omfs_sops;
+
+	root = omfs_iget(sb, be64_to_cpu(omfs_rb->r_root_dir));
+	if (IS_ERR(root)) {
+		ret = PTR_ERR(root);
+		goto out_brelse_bh2;
+	}
+
+	sb->s_root = d_alloc_root(root);
+	if (!sb->s_root) {
+		iput(root);
+		goto out_brelse_bh2;
+	}
+	printk(KERN_DEBUG "omfs: Mounted volume %s\n", omfs_rb->r_name);
+
+	ret = 0;
+out_brelse_bh2:
+	brelse(bh2);
+out_brelse_bh:
+	brelse(bh);
+end:
+	return ret;
+}
+
+static int omfs_get_sb(struct file_system_type *fs_type,
+			int flags, const char *dev_name,
+			void *data, struct vfsmount *m)
+{
+	return get_sb_bdev(fs_type, flags, dev_name, data, omfs_fill_super, m);
+}
+
+static struct file_system_type omfs_fs_type = {
+	.owner = THIS_MODULE,
+	.name = "omfs",
+	.get_sb = omfs_get_sb,
+	.kill_sb = kill_block_super,
+	.fs_flags = FS_REQUIRES_DEV,
+};
+
+static int __init init_omfs_fs(void)
+{
+	return register_filesystem(&omfs_fs_type);
+}
+
+static void __exit exit_omfs_fs(void)
+{
+	unregister_filesystem(&omfs_fs_type);
+}
+
+module_init(init_omfs_fs);
+module_exit(exit_omfs_fs);
diff --git a/fs/omfs/omfs.h b/fs/omfs/omfs.h
new file mode 100644
index 000000000000..2bc0f0670406
--- /dev/null
+++ b/fs/omfs/omfs.h
@@ -0,0 +1,67 @@
+#ifndef _OMFS_H
+#define _OMFS_H
+
+#include <linux/module.h>
+#include <linux/fs.h>
+
+#include "omfs_fs.h"
+
+/* In-memory structures */
+struct omfs_sb_info {
+	u64 s_num_blocks;
+	u64 s_bitmap_ino;
+	u64 s_root_ino;
+	u32 s_blocksize;
+	u32 s_mirrors;
+	u32 s_sys_blocksize;
+	u32 s_clustersize;
+	int s_block_shift;
+	unsigned long **s_imap;
+	int s_imap_size;
+	struct mutex s_bitmap_lock;
+	int s_uid;
+	int s_gid;
+	int s_dmask;
+	int s_fmask;
+};
+
+/* convert a cluster number to a scaled block number */
+static inline sector_t clus_to_blk(struct omfs_sb_info *sbi, sector_t block)
+{
+	return block << sbi->s_block_shift;
+}
+
+static inline struct omfs_sb_info *OMFS_SB(struct super_block *sb)
+{
+	return sb->s_fs_info;
+}
+
+/* bitmap.c */
+extern unsigned long omfs_count_free(struct super_block *sb);
+extern int omfs_allocate_block(struct super_block *sb, u64 block);
+extern int omfs_allocate_range(struct super_block *sb, int min_request,
+			int max_request, u64 *return_block, int *return_size);
+extern int omfs_clear_range(struct super_block *sb, u64 block, int count);
+
+/* dir.c */
+extern struct file_operations omfs_dir_operations;
+extern struct inode_operations omfs_dir_inops;
+extern int omfs_make_empty(struct inode *inode, struct super_block *sb);
+extern int omfs_is_bad(struct omfs_sb_info *sbi, struct omfs_header *header,
+			u64 fsblock);
+
+/* file.c */
+extern struct file_operations omfs_file_operations;
+extern struct inode_operations omfs_file_inops;
+extern struct address_space_operations omfs_aops;
+extern void omfs_make_empty_table(struct buffer_head *bh, int offset);
+extern int omfs_shrink_inode(struct inode *inode);
+
+/* inode.c */
+extern struct inode *omfs_iget(struct super_block *sb, ino_t inode);
+extern struct inode *omfs_new_inode(struct inode *dir, int mode);
+extern int omfs_reserve_block(struct super_block *sb, sector_t block);
+extern int omfs_find_empty_block(struct super_block *sb, int mode, ino_t *ino);
+extern int omfs_sync_inode(struct inode *inode);
+
+#endif
diff --git a/fs/omfs/omfs_fs.h b/fs/omfs/omfs_fs.h
new file mode 100644
index 000000000000..12cca245d6e8
--- /dev/null
+++ b/fs/omfs/omfs_fs.h
@@ -0,0 +1,80 @@
+#ifndef _OMFS_FS_H
+#define _OMFS_FS_H
+
+/* OMFS On-disk structures */
+
+#define OMFS_MAGIC 0xC2993D87
+#define OMFS_IMAGIC 0xD2
+
+#define OMFS_DIR 'D'
+#define OMFS_FILE 'F'
+#define OMFS_INODE_NORMAL 'e'
+#define OMFS_INODE_CONTINUATION 'c'
+#define OMFS_INODE_SYSTEM 's'
+#define OMFS_NAMELEN 256
+#define OMFS_DIR_START 0x1b8
+#define OMFS_EXTENT_START 0x1d0
+#define OMFS_EXTENT_CONT 0x40
+#define OMFS_XOR_COUNT 19
+#define OMFS_MAX_BLOCK_SIZE 8192
+
+struct omfs_super_block {
+	char s_fill1[256];
+	__be64 s_root_block;		/* block number of omfs_root_block */
+	__be64 s_num_blocks;		/* total number of FS blocks */
+	__be32 s_magic;			/* OMFS_MAGIC */
+	__be32 s_blocksize;		/* size of a block */
+	__be32 s_mirrors;		/* # of mirrors of system blocks */
+	__be32 s_sys_blocksize;		/* size of non-data blocks */
+};
+
+struct omfs_header {
+	__be64 h_self;			/* FS block where this is located */
+	__be32 h_body_size;		/* size of useful data after header */
+	__be16 h_crc;			/* crc-ccitt of body_size bytes */
+	char h_fill1[2];
+	u8 h_version;			/* version, always 1 */
+	char h_type;			/* OMFS_INODE_X */
+	u8 h_magic;			/* OMFS_IMAGIC */
+	u8 h_check_xor;			/* XOR of header bytes before this */
+	__be32 h_fill2;
+};
+
+struct omfs_root_block {
+	struct omfs_header r_head;	/* header */
+	__be64 r_fill1;
+	__be64 r_num_blocks;		/* total number of FS blocks */
+	__be64 r_root_dir;		/* block # of root directory */
+	__be64 r_bitmap;		/* block # of free space bitmap */
+	__be32 r_blocksize;		/* size of a block */
+	__be32 r_clustersize;		/* size allocated for data blocks */
+	__be64 r_mirrors;		/* # of mirrors of system blocks */
+	char r_name[OMFS_NAMELEN];	/* partition label */
+};
+
+struct omfs_inode {
+	struct omfs_header i_head;	/* header */
+	__be64 i_parent;		/* parent containing this inode */
+	__be64 i_sibling;		/* next inode in hash bucket */
+	__be64 i_ctime;			/* ctime, in milliseconds */
+	char i_fill1[35];
+	char i_type;			/* OMFS_[DIR,FILE] */
+	__be32 i_fill2;
+	char i_fill3[64];
+	char i_name[OMFS_NAMELEN];	/* filename */
+	__be64 i_size;			/* size of file, in bytes */
+};
+
+struct omfs_extent_entry {
+	__be64 e_cluster;		/* start location of a set of blocks */
+	__be64 e_blocks;		/* number of blocks after e_cluster */
+};
+
+struct omfs_extent {
+	__be64 e_next;			/* next extent table location */
+	__be32 e_extent_count;		/* total # extents in this table */
+	__be32 e_fill;
+	struct omfs_extent_entry e_entry;	/* start of extent entries */
+};
+
+#endif
diff --git a/fs/open.c b/fs/open.c
index bb98d2fe809f..07da9359481c 100644
--- a/fs/open.c
+++ b/fs/open.c
@@ -122,37 +122,37 @@ static int vfs_statfs64(struct dentry *dentry, struct statfs64 *buf)
 	return 0;
 }
 
-asmlinkage long sys_statfs(const char __user * path, struct statfs __user * buf)
+asmlinkage long sys_statfs(const char __user *pathname, struct statfs __user * buf)
 {
-	struct nameidata nd;
+	struct path path;
 	int error;
 
-	error = user_path_walk(path, &nd);
+	error = user_path(pathname, &path);
 	if (!error) {
 		struct statfs tmp;
-		error = vfs_statfs_native(nd.path.dentry, &tmp);
+		error = vfs_statfs_native(path.dentry, &tmp);
 		if (!error && copy_to_user(buf, &tmp, sizeof(tmp)))
 			error = -EFAULT;
-		path_put(&nd.path);
+		path_put(&path);
 	}
 	return error;
 }
 
 
-asmlinkage long sys_statfs64(const char __user *path, size_t sz, struct statfs64 __user *buf)
+asmlinkage long sys_statfs64(const char __user *pathname, size_t sz, struct statfs64 __user *buf)
 {
-	struct nameidata nd;
+	struct path path;
 	long error;
 
 	if (sz != sizeof(*buf))
 		return -EINVAL;
-	error = user_path_walk(path, &nd);
+	error = user_path(pathname, &path);
 	if (!error) {
 		struct statfs64 tmp;
-		error = vfs_statfs64(nd.path.dentry, &tmp);
+		error = vfs_statfs64(path.dentry, &tmp);
 		if (!error && copy_to_user(buf, &tmp, sizeof(tmp)))
 			error = -EFAULT;
-		path_put(&nd.path);
+		path_put(&path);
 	}
 	return error;
 }
@@ -223,20 +223,20 @@ int do_truncate(struct dentry *dentry, loff_t length, unsigned int time_attrs,
 	return err;
 }
 
-static long do_sys_truncate(const char __user * path, loff_t length)
+static long do_sys_truncate(const char __user *pathname, loff_t length)
 {
-	struct nameidata nd;
-	struct inode * inode;
+	struct path path;
+	struct inode *inode;
 	int error;
 
 	error = -EINVAL;
 	if (length < 0)	/* sorry, but loff_t says... */
 		goto out;
 
-	error = user_path_walk(path, &nd);
+	error = user_path(pathname, &path);
 	if (error)
 		goto out;
-	inode = nd.path.dentry->d_inode;
+	inode = path.dentry->d_inode;
 
 	/* For directories it's -EISDIR, for other non-regulars - -EINVAL */
 	error = -EISDIR;
@@ -247,16 +247,16 @@ static long do_sys_truncate(const char __user * path, loff_t length)
 	if (!S_ISREG(inode->i_mode))
 		goto dput_and_out;
 
-	error = mnt_want_write(nd.path.mnt);
+	error = mnt_want_write(path.mnt);
 	if (error)
 		goto dput_and_out;
 
-	error = vfs_permission(&nd, MAY_WRITE);
+	error = inode_permission(inode, MAY_WRITE);
 	if (error)
 		goto mnt_drop_write_and_out;
 
 	error = -EPERM;
-	if (IS_IMMUTABLE(inode) || IS_APPEND(inode))
+	if (IS_APPEND(inode))
 		goto mnt_drop_write_and_out;
 
 	error = get_write_access(inode);
@@ -274,15 +274,15 @@ static long do_sys_truncate(const char __user * path, loff_t length)
 	error = locks_verify_truncate(inode, NULL, length);
 	if (!error) {
 		DQUOT_INIT(inode);
-		error = do_truncate(nd.path.dentry, length, 0, NULL);
+		error = do_truncate(path.dentry, length, 0, NULL);
 	}
 
 put_write_and_out:
 	put_write_access(inode);
 mnt_drop_write_and_out:
-	mnt_drop_write(nd.path.mnt);
+	mnt_drop_write(path.mnt);
 dput_and_out:
-	path_put(&nd.path);
+	path_put(&path);
 out:
 	return error;
 }
@@ -425,7 +425,8 @@ out:
  */
 asmlinkage long sys_faccessat(int dfd, const char __user *filename, int mode)
 {
-	struct nameidata nd;
+	struct path path;
+	struct inode *inode;
 	int old_fsuid, old_fsgid;
 	kernel_cap_t uninitialized_var(old_cap);  /* !SECURE_NO_SETUID_FIXUP */
 	int res;
@@ -448,7 +449,7 @@ asmlinkage long sys_faccessat(int dfd, const char __user *filename, int mode)
 		 * FIXME: There is a race here against sys_capset.  The
 		 * capabilities can change yet we will restore the old
 		 * value below.  We should hold task_capabilities_lock,
-		 * but we cannot because user_path_walk can sleep.
+		 * but we cannot because user_path_at can sleep.
 		 */
 #endif /* ndef CONFIG_SECURITY_FILE_CAPABILITIES */
 		if (current->uid)
@@ -457,14 +458,25 @@ asmlinkage long sys_faccessat(int dfd, const char __user *filename, int mode)
 			old_cap = cap_set_effective(current->cap_permitted);
 	}
 
-	res = __user_walk_fd(dfd, filename, LOOKUP_FOLLOW|LOOKUP_ACCESS, &nd);
+	res = user_path_at(dfd, filename, LOOKUP_FOLLOW, &path);
 	if (res)
 		goto out;
 
-	res = vfs_permission(&nd, mode);
+	inode = path.dentry->d_inode;
+
+	if ((mode & MAY_EXEC) && S_ISREG(inode->i_mode)) {
+		/*
+		 * MAY_EXEC on regular files is denied if the fs is mounted
+		 * with the "noexec" flag.
+		 */
+		res = -EACCES;
+		if (path.mnt->mnt_flags & MNT_NOEXEC)
+			goto out_path_release;
+	}
+
+	res = inode_permission(inode, mode | MAY_ACCESS);
 	/* SuS v2 requires we report a read only fs too */
-	if(res || !(mode & S_IWOTH) ||
-	   special_file(nd.path.dentry->d_inode->i_mode))
+	if (res || !(mode & S_IWOTH) || special_file(inode->i_mode))
 		goto out_path_release;
 	/*
 	 * This is a rare case where using __mnt_is_readonly()
@@ -476,11 +488,11 @@ asmlinkage long sys_faccessat(int dfd, const char __user *filename, int mode)
 	 * inherently racy and know that the fs may change
 	 * state before we even see this result.
 	 */
-	if (__mnt_is_readonly(nd.path.mnt))
+	if (__mnt_is_readonly(path.mnt))
 		res = -EROFS;
 
 out_path_release:
-	path_put(&nd.path);
+	path_put(&path);
 out:
 	current->fsuid = old_fsuid;
 	current->fsgid = old_fsgid;
@@ -498,22 +510,21 @@ asmlinkage long sys_access(const char __user *filename, int mode)
 
 asmlinkage long sys_chdir(const char __user * filename)
 {
-	struct nameidata nd;
+	struct path path;
 	int error;
 
-	error = __user_walk(filename,
-			    LOOKUP_FOLLOW|LOOKUP_DIRECTORY|LOOKUP_CHDIR, &nd);
+	error = user_path_dir(filename, &path);
 	if (error)
 		goto out;
 
-	error = vfs_permission(&nd, MAY_EXEC);
+	error = inode_permission(path.dentry->d_inode, MAY_EXEC | MAY_ACCESS);
 	if (error)
 		goto dput_and_out;
 
-	set_fs_pwd(current->fs, &nd.path);
+	set_fs_pwd(current->fs, &path);
 
 dput_and_out:
-	path_put(&nd.path);
+	path_put(&path);
 out:
 	return error;
 }
@@ -535,7 +546,7 @@ asmlinkage long sys_fchdir(unsigned int fd)
 	if (!S_ISDIR(inode->i_mode))
 		goto out_putf;
 
-	error = file_permission(file, MAY_EXEC);
+	error = inode_permission(inode, MAY_EXEC | MAY_ACCESS);
 	if (!error)
 		set_fs_pwd(current->fs, &file->f_path);
 out_putf:
@@ -546,14 +557,14 @@ out:
 
 asmlinkage long sys_chroot(const char __user * filename)
 {
-	struct nameidata nd;
+	struct path path;
 	int error;
 
-	error = __user_walk(filename, LOOKUP_FOLLOW | LOOKUP_DIRECTORY | LOOKUP_NOALT, &nd);
+	error = user_path_dir(filename, &path);
 	if (error)
 		goto out;
 
-	error = vfs_permission(&nd, MAY_EXEC);
+	error = inode_permission(path.dentry->d_inode, MAY_EXEC | MAY_ACCESS);
 	if (error)
 		goto dput_and_out;
 
@@ -561,11 +572,10 @@ asmlinkage long sys_chroot(const char __user * filename)
 	if (!capable(CAP_SYS_CHROOT))
 		goto dput_and_out;
 
-	set_fs_root(current->fs, &nd.path);
-	set_fs_altroot();
+	set_fs_root(current->fs, &path);
 	error = 0;
 dput_and_out:
-	path_put(&nd.path);
+	path_put(&path);
 out:
 	return error;
 }
@@ -590,9 +600,6 @@ asmlinkage long sys_fchmod(unsigned int fd, mode_t mode)
 	err = mnt_want_write(file->f_path.mnt);
 	if (err)
 		goto out_putf;
-	err = -EPERM;
-	if (IS_IMMUTABLE(inode) || IS_APPEND(inode))
-		goto out_drop_write;
 	mutex_lock(&inode->i_mutex);
 	if (mode == (mode_t) -1)
 		mode = inode->i_mode;
@@ -600,8 +607,6 @@ asmlinkage long sys_fchmod(unsigned int fd, mode_t mode)
 	newattrs.ia_valid = ATTR_MODE | ATTR_CTIME;
 	err = notify_change(dentry, &newattrs);
 	mutex_unlock(&inode->i_mutex);
-
-out_drop_write:
 	mnt_drop_write(file->f_path.mnt);
 out_putf:
 	fput(file);
@@ -612,36 +617,29 @@ out:
 asmlinkage long sys_fchmodat(int dfd, const char __user *filename,
 			     mode_t mode)
 {
-	struct nameidata nd;
-	struct inode * inode;
+	struct path path;
+	struct inode *inode;
 	int error;
 	struct iattr newattrs;
 
-	error = __user_walk_fd(dfd, filename, LOOKUP_FOLLOW, &nd);
+	error = user_path_at(dfd, filename, LOOKUP_FOLLOW, &path);
 	if (error)
 		goto out;
-	inode = nd.path.dentry->d_inode;
+	inode = path.dentry->d_inode;
 
-	error = mnt_want_write(nd.path.mnt);
+	error = mnt_want_write(path.mnt);
 	if (error)
 		goto dput_and_out;
-
-	error = -EPERM;
-	if (IS_IMMUTABLE(inode) || IS_APPEND(inode))
-		goto out_drop_write;
-
 	mutex_lock(&inode->i_mutex);
 	if (mode == (mode_t) -1)
 		mode = inode->i_mode;
 	newattrs.ia_mode = (mode & S_IALLUGO) | (inode->i_mode & ~S_IALLUGO);
 	newattrs.ia_valid = ATTR_MODE | ATTR_CTIME;
-	error = notify_change(nd.path.dentry, &newattrs);
+	error = notify_change(path.dentry, &newattrs);
 	mutex_unlock(&inode->i_mutex);
-
-out_drop_write:
-	mnt_drop_write(nd.path.mnt);
+	mnt_drop_write(path.mnt);
 dput_and_out:
-	path_put(&nd.path);
+	path_put(&path);
 out:
 	return error;
 }
@@ -653,18 +651,10 @@ asmlinkage long sys_chmod(const char __user *filename, mode_t mode)
 
 static int chown_common(struct dentry * dentry, uid_t user, gid_t group)
 {
-	struct inode * inode;
+	struct inode *inode = dentry->d_inode;
 	int error;
 	struct iattr newattrs;
 
-	error = -ENOENT;
-	if (!(inode = dentry->d_inode)) {
-		printk(KERN_ERR "chown_common: NULL inode\n");
-		goto out;
-	}
-	error = -EPERM;
-	if (IS_IMMUTABLE(inode) || IS_APPEND(inode))
-		goto out;
 	newattrs.ia_valid =  ATTR_CTIME;
 	if (user != (uid_t) -1) {
 		newattrs.ia_valid |= ATTR_UID;
@@ -680,25 +670,25 @@ static int chown_common(struct dentry * dentry, uid_t user, gid_t group)
 	mutex_lock(&inode->i_mutex);
 	error = notify_change(dentry, &newattrs);
 	mutex_unlock(&inode->i_mutex);
-out:
+
 	return error;
 }
 
 asmlinkage long sys_chown(const char __user * filename, uid_t user, gid_t group)
 {
-	struct nameidata nd;
+	struct path path;
 	int error;
 
-	error = user_path_walk(filename, &nd);
+	error = user_path(filename, &path);
 	if (error)
 		goto out;
-	error = mnt_want_write(nd.path.mnt);
+	error = mnt_want_write(path.mnt);
 	if (error)
 		goto out_release;
-	error = chown_common(nd.path.dentry, user, group);
-	mnt_drop_write(nd.path.mnt);
+	error = chown_common(path.dentry, user, group);
+	mnt_drop_write(path.mnt);
 out_release:
-	path_put(&nd.path);
+	path_put(&path);
 out:
 	return error;
 }
@@ -706,7 +696,7 @@ out:
 asmlinkage long sys_fchownat(int dfd, const char __user *filename, uid_t user,
 			     gid_t group, int flag)
 {
-	struct nameidata nd;
+	struct path path;
 	int error = -EINVAL;
 	int follow;
 
@@ -714,35 +704,35 @@ asmlinkage long sys_fchownat(int dfd, const char __user *filename, uid_t user,
 		goto out;
 
 	follow = (flag & AT_SYMLINK_NOFOLLOW) ? 0 : LOOKUP_FOLLOW;
-	error = __user_walk_fd(dfd, filename, follow, &nd);
+	error = user_path_at(dfd, filename, follow, &path);
 	if (error)
 		goto out;
-	error = mnt_want_write(nd.path.mnt);
+	error = mnt_want_write(path.mnt);
 	if (error)
 		goto out_release;
-	error = chown_common(nd.path.dentry, user, group);
-	mnt_drop_write(nd.path.mnt);
+	error = chown_common(path.dentry, user, group);
+	mnt_drop_write(path.mnt);
 out_release:
-	path_put(&nd.path);
+	path_put(&path);
 out:
 	return error;
 }
 
 asmlinkage long sys_lchown(const char __user * filename, uid_t user, gid_t group)
 {
-	struct nameidata nd;
+	struct path path;
 	int error;
 
-	error = user_path_walk_link(filename, &nd);
+	error = user_lpath(filename, &path);
 	if (error)
 		goto out;
-	error = mnt_want_write(nd.path.mnt);
+	error = mnt_want_write(path.mnt);
 	if (error)
 		goto out_release;
-	error = chown_common(nd.path.dentry, user, group);
-	mnt_drop_write(nd.path.mnt);
+	error = chown_common(path.dentry, user, group);
+	mnt_drop_write(path.mnt);
 out_release:
-	path_put(&nd.path);
+	path_put(&path);
 out:
 	return error;
 }
@@ -973,71 +963,6 @@ struct file *dentry_open(struct dentry *dentry, struct vfsmount *mnt, int flags)
 }
 EXPORT_SYMBOL(dentry_open);
 
-/*
- * Find an empty file descriptor entry, and mark it busy.
- */
-int get_unused_fd_flags(int flags)
-{
-	struct files_struct * files = current->files;
-	int fd, error;
-	struct fdtable *fdt;
-
-  	error = -EMFILE;
-	spin_lock(&files->file_lock);
-
-repeat:
-	fdt = files_fdtable(files);
-	fd = find_next_zero_bit(fdt->open_fds->fds_bits, fdt->max_fds,
-				files->next_fd);
-
-	/*
-	 * N.B. For clone tasks sharing a files structure, this test
-	 * will limit the total number of files that can be opened.
-	 */
-	if (fd >= current->signal->rlim[RLIMIT_NOFILE].rlim_cur)
-		goto out;
-
-	/* Do we need to expand the fd array or fd set?  */
-	error = expand_files(files, fd);
-	if (error < 0)
-		goto out;
-
-	if (error) {
-		/*
-	 	 * If we needed to expand the fs array we
-		 * might have blocked - try again.
-		 */
-		error = -EMFILE;
-		goto repeat;
-	}
-
-	FD_SET(fd, fdt->open_fds);
-	if (flags & O_CLOEXEC)
-		FD_SET(fd, fdt->close_on_exec);
-	else
-		FD_CLR(fd, fdt->close_on_exec);
-	files->next_fd = fd + 1;
-#if 1
-	/* Sanity check */
-	if (fdt->fd[fd] != NULL) {
-		printk(KERN_WARNING "get_unused_fd: slot %d not NULL!\n", fd);
-		fdt->fd[fd] = NULL;
-	}
-#endif
-	error = fd;
-
-out:
-	spin_unlock(&files->file_lock);
-	return error;
-}
-
-int get_unused_fd(void)
-{
-	return get_unused_fd_flags(0);
-}
-
-EXPORT_SYMBOL(get_unused_fd);
-
 static void __put_unused_fd(struct files_struct *files, unsigned int fd)
 {
 	struct fdtable *fdt = files_fdtable(files);
diff --git a/fs/openpromfs/inode.c b/fs/openpromfs/inode.c
index d17b4fd204e1..9f5b054f06b9 100644
--- a/fs/openpromfs/inode.c
+++ b/fs/openpromfs/inode.c
@@ -430,7 +430,7 @@ static struct file_system_type openprom_fs_type = {
 	.kill_sb	= kill_anon_super,
 };
 
-static void op_inode_init_once(struct kmem_cache * cachep, void *data)
+static void op_inode_init_once(void *data)
 {
 	struct op_inode_info *oi = (struct op_inode_info *) data;
 
diff --git a/fs/partitions/check.c b/fs/partitions/check.c
index efef715135d3..7d6b34e201db 100644
--- a/fs/partitions/check.c
+++ b/fs/partitions/check.c
@@ -344,18 +344,18 @@ static ssize_t whole_disk_show(struct device *dev,
 static DEVICE_ATTR(whole_disk, S_IRUSR | S_IRGRP | S_IROTH,
 		   whole_disk_show, NULL);
 
-void add_partition(struct gendisk *disk, int part, sector_t start, sector_t len, int flags)
+int add_partition(struct gendisk *disk, int part, sector_t start, sector_t len, int flags)
 {
 	struct hd_struct *p;
 	int err;
 
 	p = kzalloc(sizeof(*p), GFP_KERNEL);
 	if (!p)
-		return;
+		return -ENOMEM;
 
 	if (!init_part_stats(p)) {
-		kfree(p);
-		return;
+		err = -ENOMEM;
+		goto out0;
 	}
 	p->start_sect = start;
 	p->nr_sects = len;
@@ -378,15 +378,31 @@ void add_partition(struct gendisk *disk, int part, sector_t start, sector_t len,
 
 	/* delay uevent until 'holders' subdir is created */
 	p->dev.uevent_suppress = 1;
-	device_add(&p->dev);
+	err = device_add(&p->dev);
+	if (err)
+		goto out1;
 	partition_sysfs_add_subdir(p);
 	p->dev.uevent_suppress = 0;
-	if (flags & ADDPART_FLAG_WHOLEDISK)
+	if (flags & ADDPART_FLAG_WHOLEDISK) {
 		err = device_create_file(&p->dev, &dev_attr_whole_disk);
+		if (err)
+			goto out2;
+	}
 
 	/* suppress uevent if the disk supresses it */
 	if (!disk->dev.uevent_suppress)
 		kobject_uevent(&p->dev.kobj, KOBJ_ADD);
+
+	return 0;
+
+out2:
+	device_del(&p->dev);
+out1:
+	put_device(&p->dev);
+	free_part_stats(p);
+out0:
+	kfree(p);
+	return err;
 }
 
 /* Not exported, helper to add_disk(). */
@@ -483,10 +499,16 @@ int rescan_partitions(struct gendisk *disk, struct block_device *bdev)
 		if (!size)
 			continue;
 		if (from + size > get_capacity(disk)) {
-			printk(" %s: p%d exceeds device capacity\n",
+			printk(KERN_ERR " %s: p%d exceeds device capacity\n",
 				disk->disk_name, p);
+			continue;
+		}
+		res = add_partition(disk, p, from, size, state->parts[p].flags);
+		if (res) {
+			printk(KERN_ERR " %s: p%d could not be added: %d\n",
+				disk->disk_name, p, -res);
+			continue;
 		}
-		add_partition(disk, p, from, size, state->parts[p].flags);
 #ifdef CONFIG_BLK_DEV_MD
 		if (state->parts[p].flags & ADDPART_FLAG_RAID)
 			md_autodetect_dev(bdev->bd_dev+p);
diff --git a/fs/partitions/efi.c b/fs/partitions/efi.c
index e7b07006bc41..038a6022152f 100644
--- a/fs/partitions/efi.c
+++ b/fs/partitions/efi.c
@@ -95,13 +95,6 @@
 #include "check.h"
 #include "efi.h"
 
-#undef EFI_DEBUG
-#ifdef EFI_DEBUG
-#define Dprintk(x...) printk(KERN_DEBUG x)
-#else
-#define Dprintk(x...)
-#endif
-
 /* This allows a kernel command line option 'gpt' to override
  * the test for invalid PMBR.  Not __initdata because reloading
  * the partition tables happens after init too.
@@ -305,10 +298,10 @@ is_gpt_valid(struct block_device *bdev, u64 lba,
 
 	/* Check the GUID Partition Table signature */
 	if (le64_to_cpu((*gpt)->signature) != GPT_HEADER_SIGNATURE) {
-		Dprintk("GUID Partition Table Header signature is wrong:"
-			"%lld != %lld\n",
-			(unsigned long long)le64_to_cpu((*gpt)->signature),
-			(unsigned long long)GPT_HEADER_SIGNATURE);
+		pr_debug("GUID Partition Table Header signature is wrong:"
+			 "%lld != %lld\n",
+			 (unsigned long long)le64_to_cpu((*gpt)->signature),
+			 (unsigned long long)GPT_HEADER_SIGNATURE);
 		goto fail;
 	}
 
@@ -318,9 +311,8 @@ is_gpt_valid(struct block_device *bdev, u64 lba,
 	crc = efi_crc32((const unsigned char *) (*gpt), le32_to_cpu((*gpt)->header_size));
 
 	if (crc != origcrc) {
-		Dprintk
-		    ("GUID Partition Table Header CRC is wrong: %x != %x\n",
-		     crc, origcrc);
+		pr_debug("GUID Partition Table Header CRC is wrong: %x != %x\n",
+			 crc, origcrc);
 		goto fail;
 	}
 	(*gpt)->header_crc32 = cpu_to_le32(origcrc);
@@ -328,9 +320,9 @@ is_gpt_valid(struct block_device *bdev, u64 lba,
 	/* Check that the my_lba entry points to the LBA that contains
 	 * the GUID Partition Table */
 	if (le64_to_cpu((*gpt)->my_lba) != lba) {
-		Dprintk("GPT my_lba incorrect: %lld != %lld\n",
-			(unsigned long long)le64_to_cpu((*gpt)->my_lba),
-			(unsigned long long)lba);
+		pr_debug("GPT my_lba incorrect: %lld != %lld\n",
+			 (unsigned long long)le64_to_cpu((*gpt)->my_lba),
+			 (unsigned long long)lba);
 		goto fail;
 	}
 
@@ -339,15 +331,15 @@ is_gpt_valid(struct block_device *bdev, u64 lba,
 	 */
 	lastlba = last_lba(bdev);
 	if (le64_to_cpu((*gpt)->first_usable_lba) > lastlba) {
-		Dprintk("GPT: first_usable_lba incorrect: %lld > %lld\n",
-			(unsigned long long)le64_to_cpu((*gpt)->first_usable_lba),
-			(unsigned long long)lastlba);
+		pr_debug("GPT: first_usable_lba incorrect: %lld > %lld\n",
+			 (unsigned long long)le64_to_cpu((*gpt)->first_usable_lba),
+			 (unsigned long long)lastlba);
 		goto fail;
 	}
 	if (le64_to_cpu((*gpt)->last_usable_lba) > lastlba) {
-		Dprintk("GPT: last_usable_lba incorrect: %lld > %lld\n",
-			(unsigned long long)le64_to_cpu((*gpt)->last_usable_lba),
-			(unsigned long long)lastlba);
+		pr_debug("GPT: last_usable_lba incorrect: %lld > %lld\n",
+			 (unsigned long long)le64_to_cpu((*gpt)->last_usable_lba),
+			 (unsigned long long)lastlba);
 		goto fail;
 	}
 
@@ -360,7 +352,7 @@ is_gpt_valid(struct block_device *bdev, u64 lba,
 			le32_to_cpu((*gpt)->sizeof_partition_entry));
 
 	if (crc != le32_to_cpu((*gpt)->partition_entry_array_crc32)) {
-		Dprintk("GUID Partitition Entry Array CRC check failed.\n");
+		pr_debug("GUID Partitition Entry Array CRC check failed.\n");
 		goto fail_ptes;
 	}
 
@@ -616,7 +608,7 @@ efi_partition(struct parsed_partitions *state, struct block_device *bdev)
 		return 0;
 	}
 
-	Dprintk("GUID Partition Table is valid!  Yea!\n");
+	pr_debug("GUID Partition Table is valid!  Yea!\n");
 
 	for (i = 0; i < le32_to_cpu(gpt->num_partition_entries) && i < state->limit-1; i++) {
 		if (!is_pte_valid(&ptes[i], last_lba(bdev)))
diff --git a/fs/partitions/ldm.c b/fs/partitions/ldm.c
index 0fdda2e8a4cc..8652fb99e962 100644
--- a/fs/partitions/ldm.c
+++ b/fs/partitions/ldm.c
@@ -133,17 +133,17 @@ static bool ldm_parse_privhead(const u8 *data, struct privhead *ph)
 	bool is_vista = false;
 
 	BUG_ON(!data || !ph);
-	if (MAGIC_PRIVHEAD != BE64(data)) {
+	if (MAGIC_PRIVHEAD != get_unaligned_be64(data)) {
 		ldm_error("Cannot find PRIVHEAD structure. LDM database is"
 			" corrupt. Aborting.");
 		return false;
 	}
-	ph->ver_major = BE16(data + 0x000C);
-	ph->ver_minor = BE16(data + 0x000E);
-	ph->logical_disk_start = BE64(data + 0x011B);
-	ph->logical_disk_size = BE64(data + 0x0123);
-	ph->config_start = BE64(data + 0x012B);
-	ph->config_size = BE64(data + 0x0133);
+	ph->ver_major = get_unaligned_be16(data + 0x000C);
+	ph->ver_minor = get_unaligned_be16(data + 0x000E);
+	ph->logical_disk_start = get_unaligned_be64(data + 0x011B);
+	ph->logical_disk_size = get_unaligned_be64(data + 0x0123);
+	ph->config_start = get_unaligned_be64(data + 0x012B);
+	ph->config_size = get_unaligned_be64(data + 0x0133);
 	/* Version 2.11 is Win2k/XP and version 2.12 is Vista. */
 	if (ph->ver_major == 2 && ph->ver_minor == 12)
 		is_vista = true;
@@ -191,14 +191,14 @@ static bool ldm_parse_tocblock (const u8 *data, struct tocblock *toc)
 {
 	BUG_ON (!data || !toc);
 
-	if (MAGIC_TOCBLOCK != BE64 (data)) {
+	if (MAGIC_TOCBLOCK != get_unaligned_be64(data)) {
 		ldm_crit ("Cannot find TOCBLOCK, database may be corrupt.");
 		return false;
 	}
 	strncpy (toc->bitmap1_name, data + 0x24, sizeof (toc->bitmap1_name));
 	toc->bitmap1_name[sizeof (toc->bitmap1_name) - 1] = 0;
-	toc->bitmap1_start = BE64 (data + 0x2E);
-	toc->bitmap1_size  = BE64 (data + 0x36);
+	toc->bitmap1_start = get_unaligned_be64(data + 0x2E);
+	toc->bitmap1_size  = get_unaligned_be64(data + 0x36);
 
 	if (strncmp (toc->bitmap1_name, TOC_BITMAP1,
 			sizeof (toc->bitmap1_name)) != 0) {
@@ -208,8 +208,8 @@ static bool ldm_parse_tocblock (const u8 *data, struct tocblock *toc)
 	}
 	strncpy (toc->bitmap2_name, data + 0x46, sizeof (toc->bitmap2_name));
 	toc->bitmap2_name[sizeof (toc->bitmap2_name) - 1] = 0;
-	toc->bitmap2_start = BE64 (data + 0x50);
-	toc->bitmap2_size  = BE64 (data + 0x58);
+	toc->bitmap2_start = get_unaligned_be64(data + 0x50);
+	toc->bitmap2_size  = get_unaligned_be64(data + 0x58);
 	if (strncmp (toc->bitmap2_name, TOC_BITMAP2,
 			sizeof (toc->bitmap2_name)) != 0) {
 		ldm_crit ("TOCBLOCK's second bitmap is '%s', should be '%s'.",
@@ -237,22 +237,22 @@ static bool ldm_parse_vmdb (const u8 *data, struct vmdb *vm)
 {
 	BUG_ON (!data || !vm);
 
-	if (MAGIC_VMDB != BE32 (data)) {
+	if (MAGIC_VMDB != get_unaligned_be32(data)) {
 		ldm_crit ("Cannot find the VMDB, database may be corrupt.");
 		return false;
 	}
 
-	vm->ver_major = BE16 (data + 0x12);
-	vm->ver_minor = BE16 (data + 0x14);
+	vm->ver_major = get_unaligned_be16(data + 0x12);
+	vm->ver_minor = get_unaligned_be16(data + 0x14);
 	if ((vm->ver_major != 4) || (vm->ver_minor != 10)) {
 		ldm_error ("Expected VMDB version %d.%d, got %d.%d. "
 			"Aborting.", 4, 10, vm->ver_major, vm->ver_minor);
 		return false;
 	}
 
-	vm->vblk_size     = BE32 (data + 0x08);
-	vm->vblk_offset   = BE32 (data + 0x0C);
-	vm->last_vblk_seq = BE32 (data + 0x04);
+	vm->vblk_size     = get_unaligned_be32(data + 0x08);
+	vm->vblk_offset   = get_unaligned_be32(data + 0x0C);
+	vm->last_vblk_seq = get_unaligned_be32(data + 0x04);
 
 	ldm_debug ("Parsed VMDB successfully.");
 	return true;
@@ -507,7 +507,7 @@ static bool ldm_validate_vmdb (struct block_device *bdev, unsigned long base,
 		goto out;				/* Already logged */
 
 	/* Are there uncommitted transactions? */
-	if (BE16(data + 0x10) != 0x01) {
+	if (get_unaligned_be16(data + 0x10) != 0x01) {
 		ldm_crit ("Database is not in a consistent state.  Aborting.");
 		goto out;
 	}
@@ -802,7 +802,7 @@ static bool ldm_parse_cmp3 (const u8 *buffer, int buflen, struct vblk *vb)
 		return false;
 
 	len += VBLK_SIZE_CMP3;
-	if (len != BE32 (buffer + 0x14))
+	if (len != get_unaligned_be32(buffer + 0x14))
 		return false;
 
 	comp = &vb->vblk.comp;
@@ -851,7 +851,7 @@ static int ldm_parse_dgr3 (const u8 *buffer, int buflen, struct vblk *vb)
 		return false;
 
 	len += VBLK_SIZE_DGR3;
-	if (len != BE32 (buffer + 0x14))
+	if (len != get_unaligned_be32(buffer + 0x14))
 		return false;
 
 	dgrp = &vb->vblk.dgrp;
@@ -895,7 +895,7 @@ static bool ldm_parse_dgr4 (const u8 *buffer, int buflen, struct vblk *vb)
 		return false;
 
 	len += VBLK_SIZE_DGR4;
-	if (len != BE32 (buffer + 0x14))
+	if (len != get_unaligned_be32(buffer + 0x14))
 		return false;
 
 	dgrp = &vb->vblk.dgrp;
@@ -931,7 +931,7 @@ static bool ldm_parse_dsk3 (const u8 *buffer, int buflen, struct vblk *vb)
 		return false;
 
 	len += VBLK_SIZE_DSK3;
-	if (len != BE32 (buffer + 0x14))
+	if (len != get_unaligned_be32(buffer + 0x14))
 		return false;
 
 	disk = &vb->vblk.disk;
@@ -968,7 +968,7 @@ static bool ldm_parse_dsk4 (const u8 *buffer, int buflen, struct vblk *vb)
 		return false;
 
 	len += VBLK_SIZE_DSK4;
-	if (len != BE32 (buffer + 0x14))
+	if (len != get_unaligned_be32(buffer + 0x14))
 		return false;
 
 	disk = &vb->vblk.disk;
@@ -1034,14 +1034,14 @@ static bool ldm_parse_prt3(const u8 *buffer, int buflen, struct vblk *vb)
 		return false;
 	}
 	len += VBLK_SIZE_PRT3;
-	if (len > BE32(buffer + 0x14)) {
+	if (len > get_unaligned_be32(buffer + 0x14)) {
 		ldm_error("len %d > BE32(buffer + 0x14) %d", len,
-				BE32(buffer + 0x14));
+				get_unaligned_be32(buffer + 0x14));
 		return false;
 	}
 	part = &vb->vblk.part;
-	part->start = BE64(buffer + 0x24 + r_name);
-	part->volume_offset = BE64(buffer + 0x2C + r_name);
+	part->start = get_unaligned_be64(buffer + 0x24 + r_name);
+	part->volume_offset = get_unaligned_be64(buffer + 0x2C + r_name);
 	part->size = ldm_get_vnum(buffer + 0x34 + r_name);
 	part->parent_id = ldm_get_vnum(buffer + 0x34 + r_size);
 	part->disk_id = ldm_get_vnum(buffer + 0x34 + r_parent);
@@ -1139,9 +1139,9 @@ static bool ldm_parse_vol5(const u8 *buffer, int buflen, struct vblk *vb)
 		return false;
 	}
 	len += VBLK_SIZE_VOL5;
-	if (len > BE32(buffer + 0x14)) {
+	if (len > get_unaligned_be32(buffer + 0x14)) {
 		ldm_error("len %d > BE32(buffer + 0x14) %d", len,
-				BE32(buffer + 0x14));
+				get_unaligned_be32(buffer + 0x14));
 		return false;
 	}
 	volu = &vb->vblk.volu;
@@ -1294,9 +1294,9 @@ static bool ldm_frag_add (const u8 *data, int size, struct list_head *frags)
 
 	BUG_ON (!data || !frags);
 
-	group = BE32 (data + 0x08);
-	rec   = BE16 (data + 0x0C);
-	num   = BE16 (data + 0x0E);
+	group = get_unaligned_be32(data + 0x08);
+	rec   = get_unaligned_be16(data + 0x0C);
+	num   = get_unaligned_be16(data + 0x0E);
 	if ((num < 1) || (num > 4)) {
 		ldm_error ("A VBLK claims to have %d parts.", num);
 		return false;
@@ -1425,12 +1425,12 @@ static bool ldm_get_vblks (struct block_device *bdev, unsigned long base,
 		}
 
 		for (v = 0; v < perbuf; v++, data+=size) {  /* For each vblk */
-			if (MAGIC_VBLK != BE32 (data)) {
+			if (MAGIC_VBLK != get_unaligned_be32(data)) {
 				ldm_error ("Expected to find a VBLK.");
 				goto out;
 			}
 
-			recs = BE16 (data + 0x0E);	/* Number of records */
+			recs = get_unaligned_be16(data + 0x0E);	/* Number of records */
 			if (recs == 1) {
 				if (!ldm_ldmdb_add (data, size, ldb))
 					goto out;	/* Already logged */
diff --git a/fs/partitions/ldm.h b/fs/partitions/ldm.h
index 80f63b5fdd9f..30e08e809c1d 100644
--- a/fs/partitions/ldm.h
+++ b/fs/partitions/ldm.h
@@ -98,11 +98,6 @@ struct parsed_partitions;
 #define TOC_BITMAP1		"config"	/* Names of the two defined */
 #define TOC_BITMAP2		"log"		/* bitmaps in the TOCBLOCK. */
 
-/* Most numbers we deal with are big-endian and won't be aligned. */
-#define BE16(x)			((u16)be16_to_cpu(get_unaligned((__be16*)(x))))
-#define BE32(x)			((u32)be32_to_cpu(get_unaligned((__be32*)(x))))
-#define BE64(x)			((u64)be64_to_cpu(get_unaligned((__be64*)(x))))
-
 /* Borrowed from msdos.c */
 #define SYS_IND(p)		(get_unaligned(&(p)->sys_ind))
 
diff --git a/fs/pipe.c b/fs/pipe.c
index 10c4e9aa5c49..fcba6542b8d0 100644
--- a/fs/pipe.c
+++ b/fs/pipe.c
@@ -777,45 +777,10 @@ pipe_rdwr_open(struct inode *inode, struct file *filp)
 /*
  * The file_operations structs are not static because they
  * are also used in linux/fs/fifo.c to do operations on FIFOs.
+ *
+ * Pipes reuse fifos' file_operations structs.
  */
-const struct file_operations read_fifo_fops = {
-	.llseek		= no_llseek,
-	.read		= do_sync_read,
-	.aio_read	= pipe_read,
-	.write		= bad_pipe_w,
-	.poll		= pipe_poll,
-	.unlocked_ioctl	= pipe_ioctl,
-	.open		= pipe_read_open,
-	.release	= pipe_read_release,
-	.fasync		= pipe_read_fasync,
-};
-
-const struct file_operations write_fifo_fops = {
-	.llseek		= no_llseek,
-	.read		= bad_pipe_r,
-	.write		= do_sync_write,
-	.aio_write	= pipe_write,
-	.poll		= pipe_poll,
-	.unlocked_ioctl	= pipe_ioctl,
-	.open		= pipe_write_open,
-	.release	= pipe_write_release,
-	.fasync		= pipe_write_fasync,
-};
-
-const struct file_operations rdwr_fifo_fops = {
-	.llseek		= no_llseek,
-	.read		= do_sync_read,
-	.aio_read	= pipe_read,
-	.write		= do_sync_write,
-	.aio_write	= pipe_write,
-	.poll		= pipe_poll,
-	.unlocked_ioctl	= pipe_ioctl,
-	.open		= pipe_rdwr_open,
-	.release	= pipe_rdwr_release,
-	.fasync		= pipe_rdwr_fasync,
-};
-
-static const struct file_operations read_pipe_fops = {
+const struct file_operations read_pipefifo_fops = {
 	.llseek		= no_llseek,
 	.read		= do_sync_read,
 	.aio_read	= pipe_read,
@@ -827,7 +792,7 @@ static const struct file_operations read_pipe_fops = {
 	.fasync		= pipe_read_fasync,
 };
 
-static const struct file_operations write_pipe_fops = {
+const struct file_operations write_pipefifo_fops = {
 	.llseek		= no_llseek,
 	.read		= bad_pipe_r,
 	.write		= do_sync_write,
@@ -839,7 +804,7 @@ static const struct file_operations write_pipe_fops = {
 	.fasync		= pipe_write_fasync,
 };
 
-static const struct file_operations rdwr_pipe_fops = {
+const struct file_operations rdwr_pipefifo_fops = {
 	.llseek		= no_llseek,
 	.read		= do_sync_read,
 	.aio_read	= pipe_read,
@@ -927,7 +892,7 @@ static struct inode * get_pipe_inode(void)
 	inode->i_pipe = pipe;
 
 	pipe->readers = pipe->writers = 1;
-	inode->i_fop = &rdwr_pipe_fops;
+	inode->i_fop = &rdwr_pipefifo_fops;
 
 	/*
 	 * Mark the inode dirty from the very beginning,
@@ -978,7 +943,7 @@ struct file *create_write_pipe(int flags)
 	d_instantiate(dentry, inode);
 
 	err = -ENFILE;
-	f = alloc_file(pipe_mnt, dentry, FMODE_WRITE, &write_pipe_fops);
+	f = alloc_file(pipe_mnt, dentry, FMODE_WRITE, &write_pipefifo_fops);
 	if (!f)
 		goto err_dentry;
 	f->f_mapping = inode->i_mapping;
@@ -1020,7 +985,7 @@ struct file *create_read_pipe(struct file *wrf, int flags)
 
 	f->f_pos = 0;
 	f->f_flags = O_RDONLY | (flags & O_NONBLOCK);
-	f->f_op = &read_pipe_fops;
+	f->f_op = &read_pipefifo_fops;
 	f->f_mode = FMODE_READ;
 	f->f_version = 0;
 
diff --git a/fs/proc/Kconfig b/fs/proc/Kconfig
new file mode 100644
index 000000000000..73cd7a418f06
--- /dev/null
+++ b/fs/proc/Kconfig
@@ -0,0 +1,59 @@
+config PROC_FS
+	bool "/proc file system support" if EMBEDDED
+	default y
+	help
+	  This is a virtual file system providing information about the status
+	  of the system. "Virtual" means that it doesn't take up any space on
+	  your hard disk: the files are created on the fly by the kernel when
+	  you try to access them. Also, you cannot read the files with older
+	  version of the program less: you need to use more or cat.
+
+	  It's totally cool; for example, "cat /proc/interrupts" gives
+	  information about what the different IRQs are used for at the moment
+	  (there is a small number of Interrupt ReQuest lines in your computer
+	  that are used by the attached devices to gain the CPU's attention --
+	  often a source of trouble if two devices are mistakenly configured
+	  to use the same IRQ). The program procinfo to display some
+	  information about your system gathered from the /proc file system.
+
+	  Before you can use the /proc file system, it has to be mounted,
+	  meaning it has to be given a location in the directory hierarchy.
+	  That location should be /proc. A command such as "mount -t proc proc
+	  /proc" or the equivalent line in /etc/fstab does the job.
+
+	  The /proc file system is explained in the file
+	  <file:Documentation/filesystems/proc.txt> and on the proc(5) manpage
+	  ("man 5 proc").
+
+	  This option will enlarge your kernel by about 67 KB. Several
+	  programs depend on this, so everyone should say Y here.
+
+config PROC_KCORE
+	bool "/proc/kcore support" if !ARM
+	depends on PROC_FS && MMU
+
+config PROC_VMCORE
+        bool "/proc/vmcore support (EXPERIMENTAL)"
+        depends on PROC_FS && CRASH_DUMP
+	default y
+        help
+        Exports the dump image of crashed kernel in ELF format.
+
+config PROC_SYSCTL
+	bool "Sysctl support (/proc/sys)" if EMBEDDED
+	depends on PROC_FS
+	select SYSCTL
+	default y
+	---help---
+	  The sysctl interface provides a means of dynamically changing
+	  certain kernel parameters and variables on the fly without requiring
+	  a recompile of the kernel or reboot of the system.  The primary
+	  interface is through /proc/sys.  If you say Y here a tree of
+	  modifiable sysctl entries will be generated beneath the
+          /proc/sys directory. They are explained in the files
+	  in <file:Documentation/sysctl/>.  Note that enabling this
+	  option will enlarge the kernel by at least 8 KB.
+
+	  As it is generally a good thing, you should say Y here unless
+	  building a kernel for install/rescue disks or your system is very
+	  limited in memory.
diff --git a/fs/proc/array.c b/fs/proc/array.c
index 797d775e0354..0d6eb33597c6 100644
--- a/fs/proc/array.c
+++ b/fs/proc/array.c
@@ -80,6 +80,7 @@
 #include <linux/delayacct.h>
 #include <linux/seq_file.h>
 #include <linux/pid_namespace.h>
+#include <linux/tracehook.h>
 
 #include <asm/pgtable.h>
 #include <asm/processor.h>
@@ -168,8 +169,12 @@ static inline void task_state(struct seq_file *m, struct pid_namespace *ns,
 	rcu_read_lock();
 	ppid = pid_alive(p) ?
 		task_tgid_nr_ns(rcu_dereference(p->real_parent), ns) : 0;
-	tpid = pid_alive(p) && p->ptrace ?
-		task_pid_nr_ns(rcu_dereference(p->parent), ns) : 0;
+	tpid = 0;
+	if (pid_alive(p)) {
+		struct task_struct *tracer = tracehook_tracer_task(p);
+		if (tracer)
+			tpid = task_pid_nr_ns(tracer, ns);
+	}
 	seq_printf(m,
 		"State:\t%s\n"
 		"Tgid:\t%d\n"
diff --git a/fs/proc/base.c b/fs/proc/base.c
index 58c3e6a8e15e..a28840b11b89 100644
--- a/fs/proc/base.c
+++ b/fs/proc/base.c
@@ -53,6 +53,7 @@
 #include <linux/time.h>
 #include <linux/proc_fs.h>
 #include <linux/stat.h>
+#include <linux/task_io_accounting_ops.h>
 #include <linux/init.h>
 #include <linux/capability.h>
 #include <linux/file.h>
@@ -69,6 +70,7 @@
 #include <linux/mount.h>
 #include <linux/security.h>
 #include <linux/ptrace.h>
+#include <linux/tracehook.h>
 #include <linux/cgroup.h>
 #include <linux/cpuset.h>
 #include <linux/audit.h>
@@ -231,10 +233,14 @@ static int check_mem_permission(struct task_struct *task)
 	 * If current is actively ptrace'ing, and would also be
 	 * permitted to freshly attach with ptrace now, permit it.
 	 */
-	if (task->parent == current && (task->ptrace & PT_PTRACED) &&
-	    task_is_stopped_or_traced(task) &&
-	    ptrace_may_access(task, PTRACE_MODE_ATTACH))
-		return 0;
+	if (task_is_stopped_or_traced(task)) {
+		int match;
+		rcu_read_lock();
+		match = (tracehook_tracer_task(task) == current);
+		rcu_read_unlock();
+		if (match && ptrace_may_access(task, PTRACE_MODE_ATTACH))
+			return 0;
+	}
 
 	/*
 	 * Noone else is allowed.
@@ -504,6 +510,26 @@ static int proc_pid_limits(struct task_struct *task, char *buffer)
 	return count;
 }
 
+#ifdef CONFIG_HAVE_ARCH_TRACEHOOK
+static int proc_pid_syscall(struct task_struct *task, char *buffer)
+{
+	long nr;
+	unsigned long args[6], sp, pc;
+
+	if (task_current_syscall(task, &nr, args, 6, &sp, &pc))
+		return sprintf(buffer, "running\n");
+
+	if (nr < 0)
+		return sprintf(buffer, "%ld 0x%lx 0x%lx\n", nr, sp, pc);
+
+	return sprintf(buffer,
+		       "%ld 0x%lx 0x%lx 0x%lx 0x%lx 0x%lx 0x%lx 0x%lx 0x%lx\n",
+		       nr,
+		       args[0], args[1], args[2], args[3], args[4], args[5],
+		       sp, pc);
+}
+#endif /* CONFIG_HAVE_ARCH_TRACEHOOK */
+
 /************************************************************************/
 /*                       Here the fs part begins                        */
 /************************************************************************/
@@ -1834,8 +1860,7 @@ static const struct file_operations proc_fd_operations = {
  * /proc/pid/fd needs a special permission handler so that a process can still
  * access /proc/self/fd after it has executed a setuid().
  */
-static int proc_fd_permission(struct inode *inode, int mask,
-				struct nameidata *nd)
+static int proc_fd_permission(struct inode *inode, int mask)
 {
 	int rv;
 
@@ -2376,29 +2401,47 @@ static int proc_base_fill_cache(struct file *filp, void *dirent,
 }
 
 #ifdef CONFIG_TASK_IO_ACCOUNTING
-static int proc_pid_io_accounting(struct task_struct *task, char *buffer)
+static int do_io_accounting(struct task_struct *task, char *buffer, int whole)
 {
+	struct task_io_accounting acct = task->ioac;
+	unsigned long flags;
+
+	if (whole && lock_task_sighand(task, &flags)) {
+		struct task_struct *t = task;
+
+		task_io_accounting_add(&acct, &task->signal->ioac);
+		while_each_thread(task, t)
+			task_io_accounting_add(&acct, &t->ioac);
+
+		unlock_task_sighand(task, &flags);
+	}
 	return sprintf(buffer,
-#ifdef CONFIG_TASK_XACCT
 			"rchar: %llu\n"
 			"wchar: %llu\n"
 			"syscr: %llu\n"
 			"syscw: %llu\n"
-#endif
 			"read_bytes: %llu\n"
 			"write_bytes: %llu\n"
 			"cancelled_write_bytes: %llu\n",
-#ifdef CONFIG_TASK_XACCT
-			(unsigned long long)task->rchar,
-			(unsigned long long)task->wchar,
-			(unsigned long long)task->syscr,
-			(unsigned long long)task->syscw,
-#endif
-			(unsigned long long)task->ioac.read_bytes,
-			(unsigned long long)task->ioac.write_bytes,
-			(unsigned long long)task->ioac.cancelled_write_bytes);
+			(unsigned long long)acct.rchar,
+			(unsigned long long)acct.wchar,
+			(unsigned long long)acct.syscr,
+			(unsigned long long)acct.syscw,
+			(unsigned long long)acct.read_bytes,
+			(unsigned long long)acct.write_bytes,
+			(unsigned long long)acct.cancelled_write_bytes);
+}
+
+static int proc_tid_io_accounting(struct task_struct *task, char *buffer)
+{
+	return do_io_accounting(task, buffer, 0);
 }
-#endif
+
+static int proc_tgid_io_accounting(struct task_struct *task, char *buffer)
+{
+	return do_io_accounting(task, buffer, 1);
+}
+#endif /* CONFIG_TASK_IO_ACCOUNTING */
 
 /*
  * Thread groups
@@ -2420,6 +2463,9 @@ static const struct pid_entry tgid_base_stuff[] = {
 #ifdef CONFIG_SCHED_DEBUG
 	REG("sched",      S_IRUGO|S_IWUSR, pid_sched),
 #endif
+#ifdef CONFIG_HAVE_ARCH_TRACEHOOK
+	INF("syscall",    S_IRUSR, pid_syscall),
+#endif
 	INF("cmdline",    S_IRUGO, pid_cmdline),
 	ONE("stat",       S_IRUGO, tgid_stat),
 	ONE("statm",      S_IRUGO, pid_statm),
@@ -2470,7 +2516,7 @@ static const struct pid_entry tgid_base_stuff[] = {
 	REG("coredump_filter", S_IRUGO|S_IWUSR, coredump_filter),
 #endif
 #ifdef CONFIG_TASK_IO_ACCOUNTING
-	INF("io",	S_IRUGO, pid_io_accounting),
+	INF("io",	S_IRUGO, tgid_io_accounting),
 #endif
 };
 
@@ -2752,6 +2798,9 @@ static const struct pid_entry tid_base_stuff[] = {
 #ifdef CONFIG_SCHED_DEBUG
 	REG("sched",     S_IRUGO|S_IWUSR, pid_sched),
 #endif
+#ifdef CONFIG_HAVE_ARCH_TRACEHOOK
+	INF("syscall",   S_IRUSR, pid_syscall),
+#endif
 	INF("cmdline",   S_IRUGO, pid_cmdline),
 	ONE("stat",      S_IRUGO, tid_stat),
 	ONE("statm",     S_IRUGO, pid_statm),
@@ -2797,6 +2846,9 @@ static const struct pid_entry tid_base_stuff[] = {
 #ifdef CONFIG_FAULT_INJECTION
 	REG("make-it-fail", S_IRUGO|S_IWUSR, fault_inject),
 #endif
+#ifdef CONFIG_TASK_IO_ACCOUNTING
+	INF("io",	S_IRUGO, tid_io_accounting),
+#endif
 };
 
 static int proc_tid_base_readdir(struct file * filp,
diff --git a/fs/proc/generic.c b/fs/proc/generic.c
index 43e54e86cefd..bca0f81eb687 100644
--- a/fs/proc/generic.c
+++ b/fs/proc/generic.c
@@ -300,10 +300,10 @@ out:
 	return rtn;
 }
 
-static DEFINE_IDR(proc_inum_idr);
+static DEFINE_IDA(proc_inum_ida);
 static DEFINE_SPINLOCK(proc_inum_lock); /* protects the above */
 
-#define PROC_DYNAMIC_FIRST 0xF0000000UL
+#define PROC_DYNAMIC_FIRST 0xF0000000U
 
 /*
  * Return an inode number between PROC_DYNAMIC_FIRST and
@@ -311,36 +311,34 @@ static DEFINE_SPINLOCK(proc_inum_lock); /* protects the above */
  */
 static unsigned int get_inode_number(void)
 {
-	int i, inum = 0;
+	unsigned int i;
 	int error;
 
 retry:
-	if (idr_pre_get(&proc_inum_idr, GFP_KERNEL) == 0)
+	if (ida_pre_get(&proc_inum_ida, GFP_KERNEL) == 0)
 		return 0;
 
 	spin_lock(&proc_inum_lock);
-	error = idr_get_new(&proc_inum_idr, NULL, &i);
+	error = ida_get_new(&proc_inum_ida, &i);
 	spin_unlock(&proc_inum_lock);
 	if (error == -EAGAIN)
 		goto retry;
 	else if (error)
 		return 0;
 
-	inum = (i & MAX_ID_MASK) + PROC_DYNAMIC_FIRST;
-
-	/* inum will never be more than 0xf0ffffff, so no check
-	 * for overflow.
-	 */
-
-	return inum;
+	if (i > UINT_MAX - PROC_DYNAMIC_FIRST) {
+		spin_lock(&proc_inum_lock);
+		ida_remove(&proc_inum_ida, i);
+		spin_unlock(&proc_inum_lock);
+		return 0;
+	}
+	return PROC_DYNAMIC_FIRST + i;
 }
 
 static void release_inode_number(unsigned int inum)
 {
-	int id = (inum - PROC_DYNAMIC_FIRST) | ~MAX_ID_MASK;
-
 	spin_lock(&proc_inum_lock);
-	idr_remove(&proc_inum_idr, id);
+	ida_remove(&proc_inum_ida, inum - PROC_DYNAMIC_FIRST);
 	spin_unlock(&proc_inum_lock);
 }
 
@@ -597,6 +595,7 @@ static struct proc_dir_entry *__proc_create(struct proc_dir_entry **parent,
 	ent->pde_users = 0;
 	spin_lock_init(&ent->pde_unload_lock);
 	ent->pde_unload_completion = NULL;
+	INIT_LIST_HEAD(&ent->pde_openers);
  out:
 	return ent;
 }
@@ -789,15 +788,25 @@ void remove_proc_entry(const char *name, struct proc_dir_entry *parent)
 	spin_unlock(&de->pde_unload_lock);
 
 continue_removing:
+	spin_lock(&de->pde_unload_lock);
+	while (!list_empty(&de->pde_openers)) {
+		struct pde_opener *pdeo;
+
+		pdeo = list_first_entry(&de->pde_openers, struct pde_opener, lh);
+		list_del(&pdeo->lh);
+		spin_unlock(&de->pde_unload_lock);
+		pdeo->release(pdeo->inode, pdeo->file);
+		kfree(pdeo);
+		spin_lock(&de->pde_unload_lock);
+	}
+	spin_unlock(&de->pde_unload_lock);
+
 	if (S_ISDIR(de->mode))
 		parent->nlink--;
 	de->nlink = 0;
-	if (de->subdir) {
-		printk(KERN_WARNING "%s: removing non-empty directory "
+	WARN(de->subdir, KERN_WARNING "%s: removing non-empty directory "
 			"'%s/%s', leaking at least '%s'\n", __func__,
 			de->parent->name, de->name, de->subdir->name);
-		WARN_ON(1);
-	}
 	if (atomic_dec_and_test(&de->count))
 		free_proc_entry(de);
 }
diff --git a/fs/proc/inode.c b/fs/proc/inode.c
index b08d10017911..8bb03f056c28 100644
--- a/fs/proc/inode.c
+++ b/fs/proc/inode.c
@@ -17,6 +17,7 @@
 #include <linux/init.h>
 #include <linux/module.h>
 #include <linux/smp_lock.h>
+#include <linux/sysctl.h>
 
 #include <asm/system.h>
 #include <asm/uaccess.h>
@@ -65,6 +66,8 @@ static void proc_delete_inode(struct inode *inode)
 			module_put(de->owner);
 		de_put(de);
 	}
+	if (PROC_I(inode)->sysctl)
+		sysctl_head_put(PROC_I(inode)->sysctl);
 	clear_inode(inode);
 }
 
@@ -84,6 +87,8 @@ static struct inode *proc_alloc_inode(struct super_block *sb)
 	ei->fd = 0;
 	ei->op.proc_get_link = NULL;
 	ei->pde = NULL;
+	ei->sysctl = NULL;
+	ei->sysctl_entry = NULL;
 	inode = &ei->vfs_inode;
 	inode->i_mtime = inode->i_atime = inode->i_ctime = CURRENT_TIME;
 	return inode;
@@ -94,7 +99,7 @@ static void proc_destroy_inode(struct inode *inode)
 	kmem_cache_free(proc_inode_cachep, PROC_I(inode));
 }
 
-static void init_once(struct kmem_cache * cachep, void *foo)
+static void init_once(void *foo)
 {
 	struct proc_inode *ei = (struct proc_inode *) foo;
 
@@ -111,27 +116,25 @@ int __init proc_init_inodecache(void)
 	return 0;
 }
 
-static int proc_remount(struct super_block *sb, int *flags, char *data)
-{
-	*flags |= MS_NODIRATIME;
-	return 0;
-}
-
 static const struct super_operations proc_sops = {
 	.alloc_inode	= proc_alloc_inode,
 	.destroy_inode	= proc_destroy_inode,
 	.drop_inode	= generic_delete_inode,
 	.delete_inode	= proc_delete_inode,
 	.statfs		= simple_statfs,
-	.remount_fs	= proc_remount,
 };
 
-static void pde_users_dec(struct proc_dir_entry *pde)
+static void __pde_users_dec(struct proc_dir_entry *pde)
 {
-	spin_lock(&pde->pde_unload_lock);
 	pde->pde_users--;
 	if (pde->pde_unload_completion && pde->pde_users == 0)
 		complete(pde->pde_unload_completion);
+}
+
+static void pde_users_dec(struct proc_dir_entry *pde)
+{
+	spin_lock(&pde->pde_unload_lock);
+	__pde_users_dec(pde);
 	spin_unlock(&pde->pde_unload_lock);
 }
 
@@ -318,36 +321,97 @@ static int proc_reg_open(struct inode *inode, struct file *file)
 	struct proc_dir_entry *pde = PDE(inode);
 	int rv = 0;
 	int (*open)(struct inode *, struct file *);
+	int (*release)(struct inode *, struct file *);
+	struct pde_opener *pdeo;
+
+	/*
+	 * What for, you ask? Well, we can have open, rmmod, remove_proc_entry
+	 * sequence. ->release won't be called because ->proc_fops will be
+	 * cleared. Depending on complexity of ->release, consequences vary.
+	 *
+	 * We can't wait for mercy when close will be done for real, it's
+	 * deadlockable: rmmod foo </proc/foo . So, we're going to do ->release
+	 * by hand in remove_proc_entry(). For this, save opener's credentials
+	 * for later.
+	 */
+	pdeo = kmalloc(sizeof(struct pde_opener), GFP_KERNEL);
+	if (!pdeo)
+		return -ENOMEM;
 
 	spin_lock(&pde->pde_unload_lock);
 	if (!pde->proc_fops) {
 		spin_unlock(&pde->pde_unload_lock);
+		kfree(pdeo);
 		return rv;
 	}
 	pde->pde_users++;
 	open = pde->proc_fops->open;
+	release = pde->proc_fops->release;
 	spin_unlock(&pde->pde_unload_lock);
 
 	if (open)
 		rv = open(inode, file);
 
-	pde_users_dec(pde);
+	spin_lock(&pde->pde_unload_lock);
+	if (rv == 0 && release) {
+		/* To know what to release. */
+		pdeo->inode = inode;
+		pdeo->file = file;
+		/* Strictly for "too late" ->release in proc_reg_release(). */
+		pdeo->release = release;
+		list_add(&pdeo->lh, &pde->pde_openers);
+	} else
+		kfree(pdeo);
+	__pde_users_dec(pde);
+	spin_unlock(&pde->pde_unload_lock);
 	return rv;
 }
 
+static struct pde_opener *find_pde_opener(struct proc_dir_entry *pde,
+					struct inode *inode, struct file *file)
+{
+	struct pde_opener *pdeo;
+
+	list_for_each_entry(pdeo, &pde->pde_openers, lh) {
+		if (pdeo->inode == inode && pdeo->file == file)
+			return pdeo;
+	}
+	return NULL;
+}
+
 static int proc_reg_release(struct inode *inode, struct file *file)
 {
 	struct proc_dir_entry *pde = PDE(inode);
 	int rv = 0;
 	int (*release)(struct inode *, struct file *);
+	struct pde_opener *pdeo;
 
 	spin_lock(&pde->pde_unload_lock);
+	pdeo = find_pde_opener(pde, inode, file);
 	if (!pde->proc_fops) {
-		spin_unlock(&pde->pde_unload_lock);
+		/*
+		 * Can't simply exit, __fput() will think that everything is OK,
+		 * and move on to freeing struct file. remove_proc_entry() will
+		 * find slacker in opener's list and will try to do non-trivial
+		 * things with struct file. Therefore, remove opener from list.
+		 *
+		 * But if opener is removed from list, who will ->release it?
+		 */
+		if (pdeo) {
+			list_del(&pdeo->lh);
+			spin_unlock(&pde->pde_unload_lock);
+			rv = pdeo->release(inode, file);
+			kfree(pdeo);
+		} else
+			spin_unlock(&pde->pde_unload_lock);
 		return rv;
 	}
 	pde->pde_users++;
 	release = pde->proc_fops->release;
+	if (pdeo) {
+		list_del(&pdeo->lh);
+		kfree(pdeo);
+	}
 	spin_unlock(&pde->pde_unload_lock);
 
 	if (release)
diff --git a/fs/proc/internal.h b/fs/proc/internal.h
index 28cbca805905..442202314d53 100644
--- a/fs/proc/internal.h
+++ b/fs/proc/internal.h
@@ -63,6 +63,7 @@ extern const struct file_operations proc_smaps_operations;
 extern const struct file_operations proc_clear_refs_operations;
 extern const struct file_operations proc_pagemap_operations;
 extern const struct file_operations proc_net_operations;
+extern const struct file_operations proc_kmsg_operations;
 extern const struct inode_operations proc_net_inode_operations;
 
 void free_proc_entry(struct proc_dir_entry *de);
@@ -88,3 +89,10 @@ struct dentry *proc_lookup_de(struct proc_dir_entry *de, struct inode *ino,
 		struct dentry *dentry);
 int proc_readdir_de(struct proc_dir_entry *de, struct file *filp, void *dirent,
 		filldir_t filldir);
+
+struct pde_opener {
+	struct inode *inode;
+	struct file *file;
+	int (*release)(struct inode *, struct file *);
+	struct list_head lh;
+};
diff --git a/fs/proc/kcore.c b/fs/proc/kcore.c
index e78c81fcf547..c2370c76fb71 100644
--- a/fs/proc/kcore.c
+++ b/fs/proc/kcore.c
@@ -23,6 +23,10 @@
 
 #define CORE_STR "CORE"
 
+#ifndef ELF_CORE_EFLAGS
+#define ELF_CORE_EFLAGS	0
+#endif
+
 static int open_kcore(struct inode * inode, struct file * filp)
 {
 	return capable(CAP_SYS_RAWIO) ? 0 : -EPERM;
@@ -164,11 +168,7 @@ static void elf_kcore_store_hdr(char *bufp, int nphdr, int dataoff)
 	elf->e_entry	= 0;
 	elf->e_phoff	= sizeof(struct elfhdr);
 	elf->e_shoff	= 0;
-#if defined(CONFIG_H8300)
-	elf->e_flags	= ELF_FLAGS;
-#else
-	elf->e_flags	= 0;
-#endif
+	elf->e_flags	= ELF_CORE_EFLAGS;
 	elf->e_ehsize	= sizeof(struct elfhdr);
 	elf->e_phentsize= sizeof(struct elf_phdr);
 	elf->e_phnum	= nphdr;
diff --git a/fs/proc/kmsg.c b/fs/proc/kmsg.c
index ff3b90b56e9d..9fd5df3f40ce 100644
--- a/fs/proc/kmsg.c
+++ b/fs/proc/kmsg.c
@@ -15,6 +15,8 @@
 #include <asm/uaccess.h>
 #include <asm/io.h>
 
+#include "internal.h"
+
 extern wait_queue_head_t log_wait;
 
 extern int do_syslog(int type, char __user *bug, int count);
diff --git a/fs/proc/nommu.c b/fs/proc/nommu.c
index 79ecd281d2cb..3f87d2632947 100644
--- a/fs/proc/nommu.c
+++ b/fs/proc/nommu.c
@@ -52,14 +52,14 @@ int nommu_vma_show(struct seq_file *m, struct vm_area_struct *vma)
 	}
 
 	seq_printf(m,
-		   "%08lx-%08lx %c%c%c%c %08lx %02x:%02x %lu %n",
+		   "%08lx-%08lx %c%c%c%c %08llx %02x:%02x %lu %n",
 		   vma->vm_start,
 		   vma->vm_end,
 		   flags & VM_READ ? 'r' : '-',
 		   flags & VM_WRITE ? 'w' : '-',
 		   flags & VM_EXEC ? 'x' : '-',
 		   flags & VM_MAYSHARE ? flags & VM_SHARED ? 'S' : 's' : 'p',
-		   vma->vm_pgoff << PAGE_SHIFT,
+		   ((loff_t)vma->vm_pgoff) << PAGE_SHIFT,
 		   MAJOR(dev), MINOR(dev), ino, &len);
 
 	if (file) {
diff --git a/fs/proc/proc_misc.c b/fs/proc/proc_misc.c
index ded969862960..00f10a2dcf12 100644
--- a/fs/proc/proc_misc.c
+++ b/fs/proc/proc_misc.c
@@ -24,6 +24,7 @@
 #include <linux/tty.h>
 #include <linux/string.h>
 #include <linux/mman.h>
+#include <linux/quicklist.h>
 #include <linux/proc_fs.h>
 #include <linux/ioport.h>
 #include <linux/mm.h>
@@ -189,7 +190,8 @@ static int meminfo_read_proc(char *page, char **start, off_t off,
 		"Committed_AS: %8lu kB\n"
 		"VmallocTotal: %8lu kB\n"
 		"VmallocUsed:  %8lu kB\n"
-		"VmallocChunk: %8lu kB\n",
+		"VmallocChunk: %8lu kB\n"
+		"Quicklists:   %8lu kB\n",
 		K(i.totalram),
 		K(i.freeram),
 		K(i.bufferram),
@@ -221,7 +223,8 @@ static int meminfo_read_proc(char *page, char **start, off_t off,
 		K(committed),
 		(unsigned long)VMALLOC_TOTAL >> 10,
 		vmi.used >> 10,
-		vmi.largest_chunk >> 10
+		vmi.largest_chunk >> 10,
+		K(quicklist_total_size())
 		);
 
 		len += hugetlb_report_meminfo(page + len);
diff --git a/fs/proc/proc_sysctl.c b/fs/proc/proc_sysctl.c
index 5acc001d49f6..f9a8b892718f 100644
--- a/fs/proc/proc_sysctl.c
+++ b/fs/proc/proc_sysctl.c
@@ -10,149 +10,110 @@
 static struct dentry_operations proc_sys_dentry_operations;
 static const struct file_operations proc_sys_file_operations;
 static const struct inode_operations proc_sys_inode_operations;
+static const struct file_operations proc_sys_dir_file_operations;
+static const struct inode_operations proc_sys_dir_operations;
 
-static void proc_sys_refresh_inode(struct inode *inode, struct ctl_table *table)
-{
-	/* Refresh the cached information bits in the inode */
-	if (table) {
-		inode->i_uid = 0;
-		inode->i_gid = 0;
-		inode->i_mode = table->mode;
-		if (table->proc_handler) {
-			inode->i_mode |= S_IFREG;
-			inode->i_nlink = 1;
-		} else {
-			inode->i_mode |= S_IFDIR;
-			inode->i_nlink = 0;	/* It is too hard to figure out */
-		}
-	}
-}
-
-static struct inode *proc_sys_make_inode(struct inode *dir, struct ctl_table *table)
+static struct inode *proc_sys_make_inode(struct super_block *sb,
+		struct ctl_table_header *head, struct ctl_table *table)
 {
 	struct inode *inode;
-	struct proc_inode *dir_ei, *ei;
-	int depth;
+	struct proc_inode *ei;
 
-	inode = new_inode(dir->i_sb);
+	inode = new_inode(sb);
 	if (!inode)
 		goto out;
 
-	/* A directory is always one deeper than it's parent */
-	dir_ei = PROC_I(dir);
-	depth = dir_ei->fd + 1;
-
+	sysctl_head_get(head);
 	ei = PROC_I(inode);
-	ei->fd = depth;
+	ei->sysctl = head;
+	ei->sysctl_entry = table;
+
 	inode->i_mtime = inode->i_atime = inode->i_ctime = CURRENT_TIME;
-	inode->i_op = &proc_sys_inode_operations;
-	inode->i_fop = &proc_sys_file_operations;
 	inode->i_flags |= S_PRIVATE; /* tell selinux to ignore this inode */
-	proc_sys_refresh_inode(inode, table);
+	inode->i_mode = table->mode;
+	if (!table->child) {
+		inode->i_mode |= S_IFREG;
+		inode->i_op = &proc_sys_inode_operations;
+		inode->i_fop = &proc_sys_file_operations;
+	} else {
+		inode->i_mode |= S_IFDIR;
+		inode->i_nlink = 0;
+		inode->i_op = &proc_sys_dir_operations;
+		inode->i_fop = &proc_sys_dir_file_operations;
+	}
 out:
 	return inode;
 }
 
-static struct dentry *proc_sys_ancestor(struct dentry *dentry, int depth)
-{
-	for (;;) {
-		struct proc_inode *ei;
-
-		ei = PROC_I(dentry->d_inode);
-		if (ei->fd == depth)
-			break; /* found */
-
-		dentry = dentry->d_parent;
-	}
-	return dentry;
-}
-
-static struct ctl_table *proc_sys_lookup_table_one(struct ctl_table *table,
-							struct qstr *name)
+static struct ctl_table *find_in_table(struct ctl_table *p, struct qstr *name)
 {
 	int len;
-	for ( ; table->ctl_name || table->procname; table++) {
+	for ( ; p->ctl_name || p->procname; p++) {
 
-		if (!table->procname)
+		if (!p->procname)
 			continue;
 
-		len = strlen(table->procname);
+		len = strlen(p->procname);
 		if (len != name->len)
 			continue;
 
-		if (memcmp(table->procname, name->name, len) != 0)
+		if (memcmp(p->procname, name->name, len) != 0)
 			continue;
 
 		/* I have a match */
-		return table;
+		return p;
 	}
 	return NULL;
 }
 
-static struct ctl_table *proc_sys_lookup_table(struct dentry *dentry,
-						struct ctl_table *table)
+struct ctl_table_header *grab_header(struct inode *inode)
 {
-	struct dentry *ancestor;
-	struct proc_inode *ei;
-	int depth, i;
+	if (PROC_I(inode)->sysctl)
+		return sysctl_head_grab(PROC_I(inode)->sysctl);
+	else
+		return sysctl_head_next(NULL);
+}
 
-	ei = PROC_I(dentry->d_inode);
-	depth = ei->fd;
+static struct dentry *proc_sys_lookup(struct inode *dir, struct dentry *dentry,
+					struct nameidata *nd)
+{
+	struct ctl_table_header *head = grab_header(dir);
+	struct ctl_table *table = PROC_I(dir)->sysctl_entry;
+	struct ctl_table_header *h = NULL;
+	struct qstr *name = &dentry->d_name;
+	struct ctl_table *p;
+	struct inode *inode;
+	struct dentry *err = ERR_PTR(-ENOENT);
 
-	if (depth == 0)
-		return table;
+	if (IS_ERR(head))
+		return ERR_CAST(head);
 
-	for (i = 1; table && (i <= depth); i++) {
-		ancestor = proc_sys_ancestor(dentry, i);
-		table = proc_sys_lookup_table_one(table, &ancestor->d_name);
-		if (table)
-			table = table->child;
+	if (table && !table->child) {
+		WARN_ON(1);
+		goto out;
 	}
-	return table;
-
-}
-static struct ctl_table *proc_sys_lookup_entry(struct dentry *dparent,
-						struct qstr *name,
-						struct ctl_table *table)
-{
-	table = proc_sys_lookup_table(dparent, table);
-	if (table)
-		table = proc_sys_lookup_table_one(table, name);
-	return table;
-}
 
-static struct ctl_table *do_proc_sys_lookup(struct dentry *parent,
-						struct qstr *name,
-						struct ctl_table_header **ptr)
-{
-	struct ctl_table_header *head;
-	struct ctl_table *table = NULL;
+	table = table ? table->child : head->ctl_table;
 
-	for (head = sysctl_head_next(NULL); head;
-			head = sysctl_head_next(head)) {
-		table = proc_sys_lookup_entry(parent, name, head->ctl_table);
-		if (table)
-			break;
+	p = find_in_table(table, name);
+	if (!p) {
+		for (h = sysctl_head_next(NULL); h; h = sysctl_head_next(h)) {
+			if (h->attached_to != table)
+				continue;
+			p = find_in_table(h->attached_by, name);
+			if (p)
+				break;
+		}
 	}
-	*ptr = head;
-	return table;
-}
-
-static struct dentry *proc_sys_lookup(struct inode *dir, struct dentry *dentry,
-					struct nameidata *nd)
-{
-	struct ctl_table_header *head;
-	struct inode *inode;
-	struct dentry *err;
-	struct ctl_table *table;
 
-	err = ERR_PTR(-ENOENT);
-	table = do_proc_sys_lookup(dentry->d_parent, &dentry->d_name, &head);
-	if (!table)
+	if (!p)
 		goto out;
 
 	err = ERR_PTR(-ENOMEM);
-	inode = proc_sys_make_inode(dir, table);
+	inode = proc_sys_make_inode(dir->i_sb, h ? h : head, p);
+	if (h)
+		sysctl_head_finish(h);
+
 	if (!inode)
 		goto out;
 
@@ -168,22 +129,14 @@ out:
 static ssize_t proc_sys_call_handler(struct file *filp, void __user *buf,
 		size_t count, loff_t *ppos, int write)
 {
-	struct dentry *dentry = filp->f_dentry;
-	struct ctl_table_header *head;
-	struct ctl_table *table;
+	struct inode *inode = filp->f_path.dentry->d_inode;
+	struct ctl_table_header *head = grab_header(inode);
+	struct ctl_table *table = PROC_I(inode)->sysctl_entry;
 	ssize_t error;
 	size_t res;
 
-	table = do_proc_sys_lookup(dentry->d_parent, &dentry->d_name, &head);
-	/* Has the sysctl entry disappeared on us? */
-	error = -ENOENT;
-	if (!table)
-		goto out;
-
-	/* Has the sysctl entry been replaced by a directory? */
-	error = -EISDIR;
-	if (!table->proc_handler)
-		goto out;
+	if (IS_ERR(head))
+		return PTR_ERR(head);
 
 	/*
 	 * At this point we know that the sysctl was not unregistered
@@ -193,6 +146,11 @@ static ssize_t proc_sys_call_handler(struct file *filp, void __user *buf,
 	if (sysctl_perm(head->root, table, write ? MAY_WRITE : MAY_READ))
 		goto out;
 
+	/* if that can happen at all, it should be -EINVAL, not -EISDIR */
+	error = -EINVAL;
+	if (!table->proc_handler)
+		goto out;
+
 	/* careful: calling conventions are nasty here */
 	res = count;
 	error = table->proc_handler(table, write, filp, buf, &res, ppos);
@@ -218,82 +176,86 @@ static ssize_t proc_sys_write(struct file *filp, const char __user *buf,
 
 
 static int proc_sys_fill_cache(struct file *filp, void *dirent,
-				filldir_t filldir, struct ctl_table *table)
+				filldir_t filldir,
+				struct ctl_table_header *head,
+				struct ctl_table *table)
 {
-	struct ctl_table_header *head;
-	struct ctl_table *child_table = NULL;
 	struct dentry *child, *dir = filp->f_path.dentry;
 	struct inode *inode;
 	struct qstr qname;
 	ino_t ino = 0;
 	unsigned type = DT_UNKNOWN;
-	int ret;
 
 	qname.name = table->procname;
 	qname.len  = strlen(table->procname);
 	qname.hash = full_name_hash(qname.name, qname.len);
 
-	/* Suppress duplicates.
-	 * Only fill a directory entry if it is the value that
-	 * an ordinary lookup of that name returns.  Hide all
-	 * others.
-	 *
-	 * If we ever cache this translation in the dcache
-	 * I should do a dcache lookup first.  But for now
-	 * it is just simpler not to.
-	 */
-	ret = 0;
-	child_table = do_proc_sys_lookup(dir, &qname, &head);
-	sysctl_head_finish(head);
-	if (child_table != table)
-		return 0;
-
 	child = d_lookup(dir, &qname);
 	if (!child) {
-		struct dentry *new;
-		new = d_alloc(dir, &qname);
-		if (new) {
-			inode = proc_sys_make_inode(dir->d_inode, table);
-			if (!inode)
-				child = ERR_PTR(-ENOMEM);
-			else {
-				new->d_op = &proc_sys_dentry_operations;
-				d_add(new, inode);
+		child = d_alloc(dir, &qname);
+		if (child) {
+			inode = proc_sys_make_inode(dir->d_sb, head, table);
+			if (!inode) {
+				dput(child);
+				return -ENOMEM;
+			} else {
+				child->d_op = &proc_sys_dentry_operations;
+				d_add(child, inode);
 			}
-			if (child)
-				dput(new);
-			else
-				child = new;
+		} else {
+			return -ENOMEM;
 		}
 	}
-	if (!child || IS_ERR(child) || !child->d_inode)
-		goto end_instantiate;
 	inode = child->d_inode;
-	if (inode) {
-		ino  = inode->i_ino;
-		type = inode->i_mode >> 12;
-	}
+	ino  = inode->i_ino;
+	type = inode->i_mode >> 12;
 	dput(child);
-end_instantiate:
-	if (!ino)
-		ino= find_inode_number(dir, &qname);
-	if (!ino)
-		ino = 1;
-	return filldir(dirent, qname.name, qname.len, filp->f_pos, ino, type);
+	return !!filldir(dirent, qname.name, qname.len, filp->f_pos, ino, type);
+}
+
+static int scan(struct ctl_table_header *head, ctl_table *table,
+		unsigned long *pos, struct file *file,
+		void *dirent, filldir_t filldir)
+{
+
+	for (; table->ctl_name || table->procname; table++, (*pos)++) {
+		int res;
+
+		/* Can't do anything without a proc name */
+		if (!table->procname)
+			continue;
+
+		if (*pos < file->f_pos)
+			continue;
+
+		res = proc_sys_fill_cache(file, dirent, filldir, head, table);
+		if (res)
+			return res;
+
+		file->f_pos = *pos + 1;
+	}
+	return 0;
 }
 
 static int proc_sys_readdir(struct file *filp, void *dirent, filldir_t filldir)
 {
-	struct dentry *dentry = filp->f_dentry;
+	struct dentry *dentry = filp->f_path.dentry;
 	struct inode *inode = dentry->d_inode;
-	struct ctl_table_header *head = NULL;
-	struct ctl_table *table;
+	struct ctl_table_header *head = grab_header(inode);
+	struct ctl_table *table = PROC_I(inode)->sysctl_entry;
+	struct ctl_table_header *h = NULL;
 	unsigned long pos;
-	int ret;
+	int ret = -EINVAL;
+
+	if (IS_ERR(head))
+		return PTR_ERR(head);
 
-	ret = -ENOTDIR;
-	if (!S_ISDIR(inode->i_mode))
+	if (table && !table->child) {
+		WARN_ON(1);
 		goto out;
+	}
+
+	table = table ? table->child : head->ctl_table;
 
 	ret = 0;
 	/* Avoid a switch here: arm builds fail with missing __cmpdi2 */
@@ -311,30 +273,17 @@ static int proc_sys_readdir(struct file *filp, void *dirent, filldir_t filldir)
 	}
 	pos = 2;
 
-	/* - Find each instance of the directory
-	 * - Read all entries in each instance
-	 * - Before returning an entry to user space lookup the entry
-	 *   by name and if I find a different entry don't return
-	 *   this one because it means it is a buried dup.
-	 * For sysctl this should only happen for directory entries.
-	 */
-	for (head = sysctl_head_next(NULL); head; head = sysctl_head_next(head)) {
-		table = proc_sys_lookup_table(dentry, head->ctl_table);
+	ret = scan(head, table, &pos, filp, dirent, filldir);
+	if (ret)
+		goto out;
 
-		if (!table)
+	for (h = sysctl_head_next(NULL); h; h = sysctl_head_next(h)) {
+		if (h->attached_to != table)
 			continue;
-
-		for (; table->ctl_name || table->procname; table++, pos++) {
-			/* Can't do anything without a proc name */
-			if (!table->procname)
-				continue;
-
-			if (pos < filp->f_pos)
-				continue;
-
-			if (proc_sys_fill_cache(filp, dirent, filldir, table) < 0)
-				goto out;
-			filp->f_pos = pos + 1;
+		ret = scan(h, h->attached_by, &pos, filp, dirent, filldir);
+		if (ret) {
+			sysctl_head_finish(h);
+			break;
 		}
 	}
 	ret = 1;
@@ -343,53 +292,24 @@ out:
 	return ret;
 }
 
-static int proc_sys_permission(struct inode *inode, int mask, struct nameidata *nd)
+static int proc_sys_permission(struct inode *inode, int mask)
 {
 	/*
 	 * sysctl entries that are not writeable,
 	 * are _NOT_ writeable, capabilities or not.
 	 */
-	struct ctl_table_header *head;
-	struct ctl_table *table;
-	struct dentry *dentry;
-	int mode;
-	int depth;
+	struct ctl_table_header *head = grab_header(inode);
+	struct ctl_table *table = PROC_I(inode)->sysctl_entry;
 	int error;
 
-	head = NULL;
-	depth = PROC_I(inode)->fd;
-
-	/* First check the cached permissions, in case we don't have
-	 * enough information to lookup the sysctl table entry.
-	 */
-	error = -EACCES;
-	mode = inode->i_mode;
-
-	if (current->euid == 0)
-		mode >>= 6;
-	else if (in_group_p(0))
-		mode >>= 3;
-
-	if ((mode & mask & (MAY_READ|MAY_WRITE|MAY_EXEC)) == mask)
-		error = 0;
-
-	/* If we can't get a sysctl table entry the permission
-	 * checks on the cached mode will have to be enough.
-	 */
-	if (!nd || !depth)
-		goto out;
+	if (IS_ERR(head))
+		return PTR_ERR(head);
 
-	dentry = nd->path.dentry;
-	table = do_proc_sys_lookup(dentry->d_parent, &dentry->d_name, &head);
+	if (!table) /* global root - r-xr-xr-x */
+		error = mask & MAY_WRITE ? -EACCES : 0;
+	else /* Use the permissions on the sysctl table entry */
+		error = sysctl_perm(head->root, table, mask);
 
-	/* If the entry does not exist deny permission */
-	error = -EACCES;
-	if (!table)
-		goto out;
-
-	/* Use the permissions on the sysctl table entry */
-	error = sysctl_perm(head->root, table, mask);
-out:
 	sysctl_head_finish(head);
 	return error;
 }
@@ -409,33 +329,70 @@ static int proc_sys_setattr(struct dentry *dentry, struct iattr *attr)
 	return error;
 }
 
-/* I'm lazy and don't distinguish between files and directories,
- * until access time.
- */
+static int proc_sys_getattr(struct vfsmount *mnt, struct dentry *dentry, struct kstat *stat)
+{
+	struct inode *inode = dentry->d_inode;
+	struct ctl_table_header *head = grab_header(inode);
+	struct ctl_table *table = PROC_I(inode)->sysctl_entry;
+
+	if (IS_ERR(head))
+		return PTR_ERR(head);
+
+	generic_fillattr(inode, stat);
+	if (table)
+		stat->mode = (stat->mode & S_IFMT) | table->mode;
+
+	sysctl_head_finish(head);
+	return 0;
+}
+
 static const struct file_operations proc_sys_file_operations = {
 	.read		= proc_sys_read,
 	.write		= proc_sys_write,
+};
+
+static const struct file_operations proc_sys_dir_file_operations = {
 	.readdir	= proc_sys_readdir,
 };
 
 static const struct inode_operations proc_sys_inode_operations = {
+	.permission	= proc_sys_permission,
+	.setattr	= proc_sys_setattr,
+	.getattr	= proc_sys_getattr,
+};
+
+static const struct inode_operations proc_sys_dir_operations = {
 	.lookup		= proc_sys_lookup,
 	.permission	= proc_sys_permission,
 	.setattr	= proc_sys_setattr,
+	.getattr	= proc_sys_getattr,
 };
 
 static int proc_sys_revalidate(struct dentry *dentry, struct nameidata *nd)
 {
-	struct ctl_table_header *head;
-	struct ctl_table *table;
-	table = do_proc_sys_lookup(dentry->d_parent, &dentry->d_name, &head);
-	proc_sys_refresh_inode(dentry->d_inode, table);
-	sysctl_head_finish(head);
-	return !!table;
+	return !PROC_I(dentry->d_inode)->sysctl->unregistering;
+}
+
+static int proc_sys_delete(struct dentry *dentry)
+{
+	return !!PROC_I(dentry->d_inode)->sysctl->unregistering;
+}
+
+static int proc_sys_compare(struct dentry *dir, struct qstr *qstr,
+			    struct qstr *name)
+{
+	struct dentry *dentry = container_of(qstr, struct dentry, d_name);
+	if (qstr->len != name->len)
+		return 1;
+	if (memcmp(qstr->name, name->name, name->len))
+		return 1;
+	return !sysctl_is_seen(PROC_I(dentry->d_inode)->sysctl);
 }
 
 static struct dentry_operations proc_sys_dentry_operations = {
 	.d_revalidate	= proc_sys_revalidate,
+	.d_delete	= proc_sys_delete,
+	.d_compare	= proc_sys_compare,
 };
 
 static struct proc_dir_entry *proc_sys_root;
@@ -443,8 +400,8 @@ static struct proc_dir_entry *proc_sys_root;
 int proc_sys_init(void)
 {
 	proc_sys_root = proc_mkdir("sys", NULL);
-	proc_sys_root->proc_iops = &proc_sys_inode_operations;
-	proc_sys_root->proc_fops = &proc_sys_file_operations;
+	proc_sys_root->proc_iops = &proc_sys_dir_operations;
+	proc_sys_root->proc_fops = &proc_sys_dir_file_operations;
 	proc_sys_root->nlink = 0;
 	return 0;
 }
diff --git a/fs/proc/task_mmu.c b/fs/proc/task_mmu.c
index 7546a918f790..73d1891ee625 100644
--- a/fs/proc/task_mmu.c
+++ b/fs/proc/task_mmu.c
@@ -219,14 +219,14 @@ static int show_map(struct seq_file *m, void *v)
 		ino = inode->i_ino;
 	}
 
-	seq_printf(m, "%08lx-%08lx %c%c%c%c %08lx %02x:%02x %lu %n",
+	seq_printf(m, "%08lx-%08lx %c%c%c%c %08llx %02x:%02x %lu %n",
 			vma->vm_start,
 			vma->vm_end,
 			flags & VM_READ ? 'r' : '-',
 			flags & VM_WRITE ? 'w' : '-',
 			flags & VM_EXEC ? 'x' : '-',
 			flags & VM_MAYSHARE ? 's' : 'p',
-			vma->vm_pgoff << PAGE_SHIFT,
+			((loff_t)vma->vm_pgoff) << PAGE_SHIFT,
 			MAJOR(dev), MINOR(dev), ino, &len);
 
 	/*
diff --git a/fs/qnx4/inode.c b/fs/qnx4/inode.c
index b31ab78052b3..2aad1044b84c 100644
--- a/fs/qnx4/inode.c
+++ b/fs/qnx4/inode.c
@@ -553,7 +553,7 @@ static void qnx4_destroy_inode(struct inode *inode)
 	kmem_cache_free(qnx4_inode_cachep, qnx4_i(inode));
 }
 
-static void init_once(struct kmem_cache *cachep, void *foo)
+static void init_once(void *foo)
 {
 	struct qnx4_inode_info *ei = (struct qnx4_inode_info *) foo;
 
diff --git a/fs/quota.c b/fs/quota.c
index db1cc9f3c7aa..7f4386ebc23a 100644
--- a/fs/quota.c
+++ b/fs/quota.c
@@ -186,7 +186,7 @@ static void quota_sync_sb(struct super_block *sb, int type)
 
 void sync_dquots(struct super_block *sb, int type)
 {
-	int cnt, dirty;
+	int cnt;
 
 	if (sb) {
 		if (sb->s_qcop->quota_sync)
@@ -198,11 +198,17 @@ void sync_dquots(struct super_block *sb, int type)
 restart:
 	list_for_each_entry(sb, &super_blocks, s_list) {
 		/* This test just improves performance so it needn't be reliable... */
-		for (cnt = 0, dirty = 0; cnt < MAXQUOTAS; cnt++)
-			if ((type == cnt || type == -1) && sb_has_quota_enabled(sb, cnt)
-			    && info_any_dirty(&sb_dqopt(sb)->info[cnt]))
-				dirty = 1;
-		if (!dirty)
+		for (cnt = 0; cnt < MAXQUOTAS; cnt++) {
+			if (type != -1 && type != cnt)
+				continue;
+			if (!sb_has_quota_enabled(sb, cnt))
+				continue;
+			if (!info_dirty(&sb_dqopt(sb)->info[cnt]) &&
+			    list_empty(&sb_dqopt(sb)->info[cnt].dqi_dirty_list))
+				continue;
+			break;
+		}
+		if (cnt == MAXQUOTAS)
 			continue;
 		sb->s_count++;
 		spin_unlock(&sb_lock);
diff --git a/fs/quota_v1.c b/fs/quota_v1.c
index a6cf9269105c..5ae15b13eeb0 100644
--- a/fs/quota_v1.c
+++ b/fs/quota_v1.c
@@ -1,6 +1,7 @@
 #include <linux/errno.h>
 #include <linux/fs.h>
 #include <linux/quota.h>
+#include <linux/quotaops.h>
 #include <linux/dqblk_v1.h>
 #include <linux/quotaio_v1.h>
 #include <linux/kernel.h>
diff --git a/fs/quota_v2.c b/fs/quota_v2.c
index 234ada903633..b53827dc02d9 100644
--- a/fs/quota_v2.c
+++ b/fs/quota_v2.c
@@ -11,6 +11,7 @@
 #include <linux/init.h>
 #include <linux/module.h>
 #include <linux/slab.h>
+#include <linux/quotaops.h>
 
 #include <asm/byteorder.h>
 
diff --git a/fs/readdir.c b/fs/readdir.c
index 4e026e5407fb..93a7559bbfd8 100644
--- a/fs/readdir.c
+++ b/fs/readdir.c
@@ -80,8 +80,10 @@ static int fillonedir(void * __buf, const char * name, int namlen, loff_t offset
 	if (buf->result)
 		return -EINVAL;
 	d_ino = ino;
-	if (sizeof(d_ino) < sizeof(ino) && d_ino != ino)
+	if (sizeof(d_ino) < sizeof(ino) && d_ino != ino) {
+		buf->result = -EOVERFLOW;
 		return -EOVERFLOW;
+	}
 	buf->result++;
 	dirent = buf->dirent;
 	if (!access_ok(VERIFY_WRITE, dirent,
@@ -155,8 +157,10 @@ static int filldir(void * __buf, const char * name, int namlen, loff_t offset,
 	if (reclen > buf->count)
 		return -EINVAL;
 	d_ino = ino;
-	if (sizeof(d_ino) < sizeof(ino) && d_ino != ino)
+	if (sizeof(d_ino) < sizeof(ino) && d_ino != ino) {
+		buf->error = -EOVERFLOW;
 		return -EOVERFLOW;
+	}
 	dirent = buf->previous;
 	if (dirent) {
 		if (__put_user(offset, &dirent->d_off))
diff --git a/fs/reiserfs/inode.c b/fs/reiserfs/inode.c
index 192269698a8a..5699171212ae 100644
--- a/fs/reiserfs/inode.c
+++ b/fs/reiserfs/inode.c
@@ -2435,7 +2435,7 @@ static int reiserfs_write_full_page(struct page *page,
 		if (wbc->sync_mode != WB_SYNC_NONE || !wbc->nonblocking) {
 			lock_buffer(bh);
 		} else {
-			if (test_set_buffer_locked(bh)) {
+			if (!trylock_buffer(bh)) {
 				redirty_page_for_writepage(wbc, page);
 				continue;
 			}
diff --git a/fs/reiserfs/journal.c b/fs/reiserfs/journal.c
index e396b2fa4743..c21df71943a6 100644
--- a/fs/reiserfs/journal.c
+++ b/fs/reiserfs/journal.c
@@ -34,15 +34,10 @@
 **		        from within kupdate, it will ignore the immediate flag
 */
 
-#include <asm/uaccess.h>
-#include <asm/system.h>
-
 #include <linux/time.h>
 #include <linux/semaphore.h>
-
 #include <linux/vmalloc.h>
 #include <linux/reiserfs_fs.h>
-
 #include <linux/kernel.h>
 #include <linux/errno.h>
 #include <linux/fcntl.h>
@@ -54,6 +49,9 @@
 #include <linux/writeback.h>
 #include <linux/blkdev.h>
 #include <linux/backing-dev.h>
+#include <linux/uaccess.h>
+
+#include <asm/system.h>
 
 /* gets a struct reiserfs_journal_list * from a list head */
 #define JOURNAL_LIST_ENTRY(h) (list_entry((h), struct reiserfs_journal_list, \
@@ -558,13 +556,13 @@ static inline void insert_journal_hash(struct reiserfs_journal_cnode **table,
 static inline void lock_journal(struct super_block *p_s_sb)
 {
 	PROC_INFO_INC(p_s_sb, journal.lock_journal);
-	down(&SB_JOURNAL(p_s_sb)->j_lock);
+	mutex_lock(&SB_JOURNAL(p_s_sb)->j_mutex);
 }
 
 /* unlock the current transaction */
 static inline void unlock_journal(struct super_block *p_s_sb)
 {
-	up(&SB_JOURNAL(p_s_sb)->j_lock);
+	mutex_unlock(&SB_JOURNAL(p_s_sb)->j_mutex);
 }
 
 static inline void get_journal_list(struct reiserfs_journal_list *jl)
@@ -629,7 +627,7 @@ static int journal_list_still_alive(struct super_block *s,
 static void release_buffer_page(struct buffer_head *bh)
 {
 	struct page *page = bh->b_page;
-	if (!page->mapping && !TestSetPageLocked(page)) {
+	if (!page->mapping && trylock_page(page)) {
 		page_cache_get(page);
 		put_bh(bh);
 		if (!page->mapping)
@@ -857,7 +855,7 @@ static int write_ordered_buffers(spinlock_t * lock,
 		jh = JH_ENTRY(list->next);
 		bh = jh->bh;
 		get_bh(bh);
-		if (test_set_buffer_locked(bh)) {
+		if (!trylock_buffer(bh)) {
 			if (!buffer_dirty(bh)) {
 				list_move(&jh->list, &tmp);
 				goto loop_next;
@@ -1045,9 +1043,9 @@ static int flush_commit_list(struct super_block *s,
 	}
 
 	/* make sure nobody is trying to flush this one at the same time */
-	down(&jl->j_commit_lock);
+	mutex_lock(&jl->j_commit_mutex);
 	if (!journal_list_still_alive(s, trans_id)) {
-		up(&jl->j_commit_lock);
+		mutex_unlock(&jl->j_commit_mutex);
 		goto put_jl;
 	}
 	BUG_ON(jl->j_trans_id == 0);
@@ -1057,7 +1055,7 @@ static int flush_commit_list(struct super_block *s,
 		if (flushall) {
 			atomic_set(&(jl->j_older_commits_done), 1);
 		}
-		up(&jl->j_commit_lock);
+		mutex_unlock(&jl->j_commit_mutex);
 		goto put_jl;
 	}
 
@@ -1181,7 +1179,7 @@ static int flush_commit_list(struct super_block *s,
 	if (flushall) {
 		atomic_set(&(jl->j_older_commits_done), 1);
 	}
-	up(&jl->j_commit_lock);
+	mutex_unlock(&jl->j_commit_mutex);
       put_jl:
 	put_journal_list(s, jl);
 
@@ -1411,8 +1409,8 @@ static int flush_journal_list(struct super_block *s,
 
 	/* if flushall == 0, the lock is already held */
 	if (flushall) {
-		down(&journal->j_flush_sem);
-	} else if (!down_trylock(&journal->j_flush_sem)) {
+		mutex_lock(&journal->j_flush_mutex);
+	} else if (mutex_trylock(&journal->j_flush_mutex)) {
 		BUG();
 	}
 
@@ -1642,7 +1640,7 @@ static int flush_journal_list(struct super_block *s,
 	jl->j_state = 0;
 	put_journal_list(s, jl);
 	if (flushall)
-		up(&journal->j_flush_sem);
+		mutex_unlock(&journal->j_flush_mutex);
 	put_fs_excl();
 	return err;
 }
@@ -1772,12 +1770,12 @@ static int kupdate_transactions(struct super_block *s,
 	struct reiserfs_journal *journal = SB_JOURNAL(s);
 	chunk.nr = 0;
 
-	down(&journal->j_flush_sem);
+	mutex_lock(&journal->j_flush_mutex);
 	if (!journal_list_still_alive(s, orig_trans_id)) {
 		goto done;
 	}
 
-	/* we've got j_flush_sem held, nobody is going to delete any
+	/* we've got j_flush_mutex held, nobody is going to delete any
 	 * of these lists out from underneath us
 	 */
 	while ((num_trans && transactions_flushed < num_trans) ||
@@ -1812,7 +1810,7 @@ static int kupdate_transactions(struct super_block *s,
 	}
 
       done:
-	up(&journal->j_flush_sem);
+	mutex_unlock(&journal->j_flush_mutex);
 	return ret;
 }
 
@@ -2556,7 +2554,7 @@ static struct reiserfs_journal_list *alloc_journal_list(struct super_block *s)
 	INIT_LIST_HEAD(&jl->j_working_list);
 	INIT_LIST_HEAD(&jl->j_tail_bh_list);
 	INIT_LIST_HEAD(&jl->j_bh_list);
-	sema_init(&jl->j_commit_lock, 1);
+	mutex_init(&jl->j_commit_mutex);
 	SB_JOURNAL(s)->j_num_lists++;
 	get_journal_list(jl);
 	return jl;
@@ -2837,8 +2835,8 @@ int journal_init(struct super_block *p_s_sb, const char *j_dev_name,
 	journal->j_last = NULL;
 	journal->j_first = NULL;
 	init_waitqueue_head(&(journal->j_join_wait));
-	sema_init(&journal->j_lock, 1);
-	sema_init(&journal->j_flush_sem, 1);
+	mutex_init(&journal->j_mutex);
+	mutex_init(&journal->j_flush_mutex);
 
 	journal->j_trans_id = 10;
 	journal->j_mount_id = 10;
@@ -3873,7 +3871,7 @@ int reiserfs_prepare_for_journal(struct super_block *p_s_sb,
 {
 	PROC_INFO_INC(p_s_sb, journal.prepare);
 
-	if (test_set_buffer_locked(bh)) {
+	if (!trylock_buffer(bh)) {
 		if (!wait)
 			return 0;
 		lock_buffer(bh);
@@ -4030,7 +4028,7 @@ static int do_journal_end(struct reiserfs_transaction_handle *th,
 	 * the new transaction is fully setup, and we've already flushed the
 	 * ordered bh list
 	 */
-	down(&jl->j_commit_lock);
+	mutex_lock(&jl->j_commit_mutex);
 
 	/* save the transaction id in case we need to commit it later */
 	commit_trans_id = jl->j_trans_id;
@@ -4196,7 +4194,7 @@ static int do_journal_end(struct reiserfs_transaction_handle *th,
 		lock_kernel();
 	}
 	BUG_ON(!list_empty(&jl->j_tail_bh_list));
-	up(&jl->j_commit_lock);
+	mutex_unlock(&jl->j_commit_mutex);
 
 	/* honor the flush wishes from the caller, simple commits can
 	 ** be done outside the journal lock, they are done below
diff --git a/fs/reiserfs/super.c b/fs/reiserfs/super.c
index 1d40f2bd1970..d318c7e663fa 100644
--- a/fs/reiserfs/super.c
+++ b/fs/reiserfs/super.c
@@ -22,11 +22,11 @@
 #include <linux/blkdev.h>
 #include <linux/buffer_head.h>
 #include <linux/exportfs.h>
+#include <linux/quotaops.h>
 #include <linux/vfs.h>
 #include <linux/mnt_namespace.h>
 #include <linux/mount.h>
 #include <linux/namei.h>
-#include <linux/quotaops.h>
 
 struct file_system_type reiserfs_fs_type;
 
@@ -182,7 +182,7 @@ static int finish_unfinished(struct super_block *s)
 			int ret = reiserfs_quota_on_mount(s, i);
 			if (ret < 0)
 				reiserfs_warning(s,
-						 "reiserfs: cannot turn on journalled quota: error %d",
+						 "reiserfs: cannot turn on journaled quota: error %d",
 						 ret);
 		}
 	}
@@ -520,7 +520,7 @@ static void reiserfs_destroy_inode(struct inode *inode)
 	kmem_cache_free(reiserfs_inode_cachep, REISERFS_I(inode));
 }
 
-static void init_once(struct kmem_cache * cachep, void *foo)
+static void init_once(void *foo)
 {
 	struct reiserfs_inode_info *ei = (struct reiserfs_inode_info *)foo;
 
@@ -876,7 +876,9 @@ static int reiserfs_parse_options(struct super_block *s, char *options,	/* strin
 				     mount options were selected. */
 				  unsigned long *blocks,	/* strtol-ed from NNN of resize=NNN */
 				  char **jdev_name,
-				  unsigned int *commit_max_age)
+				  unsigned int *commit_max_age,
+				  char **qf_names,
+				  unsigned int *qfmt)
 {
 	int c;
 	char *arg = NULL;
@@ -992,9 +994,11 @@ static int reiserfs_parse_options(struct super_block *s, char *options,	/* strin
 		if (c == 'u' || c == 'g') {
 			int qtype = c == 'u' ? USRQUOTA : GRPQUOTA;
 
-			if (sb_any_quota_enabled(s)) {
+			if ((sb_any_quota_enabled(s) ||
+			     sb_any_quota_suspended(s)) &&
+			    (!*arg != !REISERFS_SB(s)->s_qf_names[qtype])) {
 				reiserfs_warning(s,
-						 "reiserfs_parse_options: cannot change journalled quota options when quota turned on.");
+						 "reiserfs_parse_options: cannot change journaled quota options when quota turned on.");
 				return 0;
 			}
 			if (*arg) {	/* Some filename specified? */
@@ -1011,46 +1015,54 @@ static int reiserfs_parse_options(struct super_block *s, char *options,	/* strin
 							 "reiserfs_parse_options: quotafile must be on filesystem root.");
 					return 0;
 				}
-				REISERFS_SB(s)->s_qf_names[qtype] =
+				qf_names[qtype] =
 				    kmalloc(strlen(arg) + 1, GFP_KERNEL);
-				if (!REISERFS_SB(s)->s_qf_names[qtype]) {
+				if (!qf_names[qtype]) {
 					reiserfs_warning(s,
 							 "reiserfs_parse_options: not enough memory for storing quotafile name.");
 					return 0;
 				}
-				strcpy(REISERFS_SB(s)->s_qf_names[qtype], arg);
+				strcpy(qf_names[qtype], arg);
 				*mount_options |= 1 << REISERFS_QUOTA;
 			} else {
-				kfree(REISERFS_SB(s)->s_qf_names[qtype]);
-				REISERFS_SB(s)->s_qf_names[qtype] = NULL;
+				if (qf_names[qtype] !=
+				    REISERFS_SB(s)->s_qf_names[qtype])
+					kfree(qf_names[qtype]);
+				qf_names[qtype] = NULL;
 			}
 		}
 		if (c == 'f') {
 			if (!strcmp(arg, "vfsold"))
-				REISERFS_SB(s)->s_jquota_fmt = QFMT_VFS_OLD;
+				*qfmt = QFMT_VFS_OLD;
 			else if (!strcmp(arg, "vfsv0"))
-				REISERFS_SB(s)->s_jquota_fmt = QFMT_VFS_V0;
+				*qfmt = QFMT_VFS_V0;
 			else {
 				reiserfs_warning(s,
 						 "reiserfs_parse_options: unknown quota format specified.");
 				return 0;
 			}
+			if ((sb_any_quota_enabled(s) ||
+			     sb_any_quota_suspended(s)) &&
+			    *qfmt != REISERFS_SB(s)->s_jquota_fmt) {
+				reiserfs_warning(s,
+						 "reiserfs_parse_options: cannot change journaled quota options when quota turned on.");
+				return 0;
+			}
 		}
 #else
 		if (c == 'u' || c == 'g' || c == 'f') {
 			reiserfs_warning(s,
-					 "reiserfs_parse_options: journalled quota options not supported.");
+					 "reiserfs_parse_options: journaled quota options not supported.");
 			return 0;
 		}
 #endif
 	}
 
 #ifdef CONFIG_QUOTA
-	if (!REISERFS_SB(s)->s_jquota_fmt
-	    && (REISERFS_SB(s)->s_qf_names[USRQUOTA]
-		|| REISERFS_SB(s)->s_qf_names[GRPQUOTA])) {
+	if (!REISERFS_SB(s)->s_jquota_fmt && !*qfmt
+	    && (qf_names[USRQUOTA] || qf_names[GRPQUOTA])) {
 		reiserfs_warning(s,
-				 "reiserfs_parse_options: journalled quota format not specified.");
+				 "reiserfs_parse_options: journaled quota format not specified.");
 		return 0;
 	}
 	/* This checking is not precise wrt the quota type but for our purposes it is sufficient */
@@ -1130,6 +1142,21 @@ static void handle_attrs(struct super_block *s)
 	}
 }
 
+#ifdef CONFIG_QUOTA
+static void handle_quota_files(struct super_block *s, char **qf_names,
+			       unsigned int *qfmt)
+{
+	int i;
+
+	for (i = 0; i < MAXQUOTAS; i++) {
+		if (qf_names[i] != REISERFS_SB(s)->s_qf_names[i])
+			kfree(REISERFS_SB(s)->s_qf_names[i]);
+		REISERFS_SB(s)->s_qf_names[i] = qf_names[i];
+	}
+	REISERFS_SB(s)->s_jquota_fmt = *qfmt;
+}
+#endif
+
 static int reiserfs_remount(struct super_block *s, int *mount_flags, char *arg)
 {
 	struct reiserfs_super_block *rs;
@@ -1141,23 +1168,30 @@ static int reiserfs_remount(struct super_block *s, int *mount_flags, char *arg)
 	struct reiserfs_journal *journal = SB_JOURNAL(s);
 	char *new_opts = kstrdup(arg, GFP_KERNEL);
 	int err;
+	char *qf_names[MAXQUOTAS];
+	unsigned int qfmt = 0;
 #ifdef CONFIG_QUOTA
 	int i;
+
+	memcpy(qf_names, REISERFS_SB(s)->s_qf_names, sizeof(qf_names));
 #endif
 
 	rs = SB_DISK_SUPER_BLOCK(s);
 
 	if (!reiserfs_parse_options
-	    (s, arg, &mount_options, &blocks, NULL, &commit_max_age)) {
+	    (s, arg, &mount_options, &blocks, NULL, &commit_max_age,
+	    qf_names, &qfmt)) {
 #ifdef CONFIG_QUOTA
-		for (i = 0; i < MAXQUOTAS; i++) {
-			kfree(REISERFS_SB(s)->s_qf_names[i]);
-			REISERFS_SB(s)->s_qf_names[i] = NULL;
-		}
+		for (i = 0; i < MAXQUOTAS; i++)
+			if (qf_names[i] != REISERFS_SB(s)->s_qf_names[i])
+				kfree(qf_names[i]);
 #endif
 		err = -EINVAL;
 		goto out_err;
 	}
+#ifdef CONFIG_QUOTA
+	handle_quota_files(s, qf_names, &qfmt);
+#endif
 
 	handle_attrs(s);
 
@@ -1570,6 +1604,8 @@ static int reiserfs_fill_super(struct super_block *s, void *data, int silent)
 	char *jdev_name;
 	struct reiserfs_sb_info *sbi;
 	int errval = -EINVAL;
+	char *qf_names[MAXQUOTAS] = {};
+	unsigned int qfmt = 0;
 
 	save_mount_options(s, data);
 
@@ -1597,9 +1633,12 @@ static int reiserfs_fill_super(struct super_block *s, void *data, int silent)
 	jdev_name = NULL;
 	if (reiserfs_parse_options
 	    (s, (char *)data, &(sbi->s_mount_opt), &blocks, &jdev_name,
-	     &commit_max_age) == 0) {
+	     &commit_max_age, qf_names, &qfmt) == 0) {
 		goto error;
 	}
+#ifdef CONFIG_QUOTA
+	handle_quota_files(s, qf_names, &qfmt);
+#endif
 
 	if (blocks) {
 		SWARN(silent, s, "jmacd-7: reiserfs_fill_super: resize option "
@@ -1819,7 +1858,7 @@ static int reiserfs_fill_super(struct super_block *s, void *data, int silent)
 
 	return (0);
 
-      error:
+error:
 	if (jinit_done) {	/* kill the commit thread, free journal ram */
 		journal_release_error(NULL, s);
 	}
@@ -1830,10 +1869,8 @@ static int reiserfs_fill_super(struct super_block *s, void *data, int silent)
 #ifdef CONFIG_QUOTA
 	{
 		int j;
-		for (j = 0; j < MAXQUOTAS; j++) {
-			kfree(sbi->s_qf_names[j]);
-			sbi->s_qf_names[j] = NULL;
-		}
+		for (j = 0; j < MAXQUOTAS; j++)
+			kfree(qf_names[j]);
 	}
 #endif
 	kfree(sbi);
@@ -1980,7 +2017,7 @@ static int reiserfs_release_dquot(struct dquot *dquot)
 
 static int reiserfs_mark_dquot_dirty(struct dquot *dquot)
 {
-	/* Are we journalling quotas? */
+	/* Are we journaling quotas? */
 	if (REISERFS_SB(dquot->dq_sb)->s_qf_names[USRQUOTA] ||
 	    REISERFS_SB(dquot->dq_sb)->s_qf_names[GRPQUOTA]) {
 		dquot_mark_dquot_dirty(dquot);
@@ -2026,6 +2063,7 @@ static int reiserfs_quota_on(struct super_block *sb, int type, int format_id,
 	int err;
 	struct nameidata nd;
 	struct inode *inode;
+	struct reiserfs_transaction_handle th;
 
 	if (!(REISERFS_SB(sb)->s_mount_opt & (1 << REISERFS_QUOTA)))
 		return -EINVAL;
@@ -2037,8 +2075,8 @@ static int reiserfs_quota_on(struct super_block *sb, int type, int format_id,
 		return err;
 	/* Quotafile not on the same filesystem? */
 	if (nd.path.mnt->mnt_sb != sb) {
-		path_put(&nd.path);
-		return -EXDEV;
+		err = -EXDEV;
+		goto out;
 	}
 	inode = nd.path.dentry->d_inode;
 	/* We must not pack tails for quota files on reiserfs for quota IO to work */
@@ -2048,24 +2086,37 @@ static int reiserfs_quota_on(struct super_block *sb, int type, int format_id,
 			reiserfs_warning(sb,
 				"reiserfs: Unpacking tail of quota file failed"
 				" (%d). Cannot turn on quotas.", err);
-			path_put(&nd.path);
-			return -EINVAL;
+			err = -EINVAL;
+			goto out;
 		}
 		mark_inode_dirty(inode);
 	}
-	/* Not journalling quota? No more tests needed... */
-	if (!REISERFS_SB(sb)->s_qf_names[USRQUOTA] &&
-	    !REISERFS_SB(sb)->s_qf_names[GRPQUOTA]) {
-		path_put(&nd.path);
-		return vfs_quota_on(sb, type, format_id, path, 0);
-	}
-	/* Quotafile not of fs root? */
-	if (nd.path.dentry->d_parent->d_inode != sb->s_root->d_inode)
-		reiserfs_warning(sb,
+	/* Journaling quota? */
+	if (REISERFS_SB(sb)->s_qf_names[type]) {
+		/* Quotafile not of fs root? */
+		if (nd.path.dentry->d_parent->d_inode != sb->s_root->d_inode)
+			reiserfs_warning(sb,
 				 "reiserfs: Quota file not on filesystem root. "
 				 "Journalled quota will not work.");
+	}
+
+	/*
+	 * When we journal data on quota file, we have to flush journal to see
+	 * all updates to the file when we bypass pagecache...
+	 */
+	if (reiserfs_file_data_log(inode)) {
+		/* Just start temporary transaction and finish it */
+		err = journal_begin(&th, sb, 1);
+		if (err)
+			goto out;
+		err = journal_end_sync(&th, sb, 1);
+		if (err)
+			goto out;
+	}
+	err = vfs_quota_on_path(sb, type, format_id, &nd.path);
+out:
 	path_put(&nd.path);
-	return vfs_quota_on(sb, type, format_id, path, 0);
+	return err;
 }
 
 /* Read data from quotafile - avoid pagecache and such because we cannot afford
diff --git a/fs/reiserfs/xattr.c b/fs/reiserfs/xattr.c
index d7c4935c1034..bb3cb5b7cdb2 100644
--- a/fs/reiserfs/xattr.c
+++ b/fs/reiserfs/xattr.c
@@ -1250,7 +1250,7 @@ static int reiserfs_check_acl(struct inode *inode, int mask)
 	return error;
 }
 
-int reiserfs_permission(struct inode *inode, int mask, struct nameidata *nd)
+int reiserfs_permission(struct inode *inode, int mask)
 {
 	/*
 	 * We don't do permission checks on the internal objects.
diff --git a/fs/reiserfs/xattr_security.c b/fs/reiserfs/xattr_security.c
index 5e90a95ad60b..056008db1377 100644
--- a/fs/reiserfs/xattr_security.c
+++ b/fs/reiserfs/xattr_security.c
@@ -6,8 +6,6 @@
 #include <linux/reiserfs_xattr.h>
 #include <asm/uaccess.h>
 
-#define XATTR_SECURITY_PREFIX "security."
-
 static int
 security_get(struct inode *inode, const char *name, void *buffer, size_t size)
 {
diff --git a/fs/reiserfs/xattr_trusted.c b/fs/reiserfs/xattr_trusted.c
index 024a938ca60f..60abe2bb1f98 100644
--- a/fs/reiserfs/xattr_trusted.c
+++ b/fs/reiserfs/xattr_trusted.c
@@ -7,8 +7,6 @@
 #include <linux/reiserfs_xattr.h>
 #include <asm/uaccess.h>
 
-#define XATTR_TRUSTED_PREFIX "trusted."
-
 static int
 trusted_get(struct inode *inode, const char *name, void *buffer, size_t size)
 {
diff --git a/fs/reiserfs/xattr_user.c b/fs/reiserfs/xattr_user.c
index 073f39364b11..1384efcb938e 100644
--- a/fs/reiserfs/xattr_user.c
+++ b/fs/reiserfs/xattr_user.c
@@ -10,8 +10,6 @@
 # include <linux/reiserfs_acl.h>
 #endif
 
-#define XATTR_USER_PREFIX "user."
-
 static int
 user_get(struct inode *inode, const char *name, void *buffer, size_t size)
 {
diff --git a/fs/romfs/inode.c b/fs/romfs/inode.c
index 3f13d491c7c7..60d2f822e87b 100644
--- a/fs/romfs/inode.c
+++ b/fs/romfs/inode.c
@@ -418,7 +418,8 @@ static int
 romfs_readpage(struct file *file, struct page * page)
 {
 	struct inode *inode = page->mapping->host;
-	loff_t offset, avail, readlen;
+	loff_t offset, size;
+	unsigned long filled;
 	void *buf;
 	int result = -EIO;
 
@@ -430,21 +431,29 @@ romfs_readpage(struct file *file, struct page * page)
 
 	/* 32 bit warning -- but not for us :) */
 	offset = page_offset(page);
-	if (offset < i_size_read(inode)) {
-		avail = inode->i_size-offset;
-		readlen = min_t(unsigned long, avail, PAGE_SIZE);
-		if (romfs_copyfrom(inode, buf, ROMFS_I(inode)->i_dataoffset+offset, readlen) == readlen) {
-			if (readlen < PAGE_SIZE) {
-				memset(buf + readlen,0,PAGE_SIZE-readlen);
-			}
-			SetPageUptodate(page);
-			result = 0;
+	size = i_size_read(inode);
+	filled = 0;
+	result = 0;
+	if (offset < size) {
+		unsigned long readlen;
+
+		size -= offset;
+		readlen = size > PAGE_SIZE ? PAGE_SIZE : size;
+
+		filled = romfs_copyfrom(inode, buf, ROMFS_I(inode)->i_dataoffset+offset, readlen);
+
+		if (filled != readlen) {
+			SetPageError(page);
+			filled = 0;
+			result = -EIO;
 		}
 	}
-	if (result) {
-		memset(buf, 0, PAGE_SIZE);
-		SetPageError(page);
-	}
+
+	if (filled < PAGE_SIZE)
+		memset(buf + filled, 0, PAGE_SIZE-filled);
+
+	if (!result)
+		SetPageUptodate(page);
 	flush_dcache_page(page);
 
 	unlock_page(page);
@@ -577,7 +586,7 @@ static void romfs_destroy_inode(struct inode *inode)
 	kmem_cache_free(romfs_inode_cachep, ROMFS_I(inode));
 }
 
-static void init_once(struct kmem_cache *cachep, void *foo)
+static void init_once(void *foo)
 {
 	struct romfs_inode_info *ei = foo;
 
diff --git a/fs/seq_file.c b/fs/seq_file.c
index 3f54dbd6c49b..bd20f7f5a933 100644
--- a/fs/seq_file.c
+++ b/fs/seq_file.c
@@ -108,9 +108,9 @@ ssize_t seq_read(struct file *file, char __user *buf, size_t size, loff_t *ppos)
 			goto Done;
 	}
 	/* we need at least one record in buffer */
+	pos = m->index;
+	p = m->op->start(m, &pos);
 	while (1) {
-		pos = m->index;
-		p = m->op->start(m, &pos);
 		err = PTR_ERR(p);
 		if (!p || IS_ERR(p))
 			break;
@@ -119,6 +119,11 @@ ssize_t seq_read(struct file *file, char __user *buf, size_t size, loff_t *ppos)
 			break;
 		if (unlikely(err))
 			m->count = 0;
+		if (unlikely(!m->count)) {
+			p = m->op->next(m, p, &pos);
+			m->index = pos;
+			continue;
+		}
 		if (m->count < m->size)
 			goto Fill;
 		m->op->stop(m, p);
@@ -128,6 +133,8 @@ ssize_t seq_read(struct file *file, char __user *buf, size_t size, loff_t *ppos)
 			goto Enomem;
 		m->count = 0;
 		m->version = 0;
+		pos = m->index;
+		p = m->op->start(m, &pos);
 	}
 	m->op->stop(m, p);
 	m->count = 0;
@@ -443,6 +450,20 @@ int seq_dentry(struct seq_file *m, struct dentry *dentry, char *esc)
 	return -1;
 }
 
+int seq_bitmap(struct seq_file *m, unsigned long *bits, unsigned int nr_bits)
+{
+	size_t len = bitmap_scnprintf_len(nr_bits);
+
+	if (m->count + len < m->size) {
+		bitmap_scnprintf(m->buf + m->count, m->size - m->count,
+				 bits, nr_bits);
+		m->count += len;
+		return 0;
+	}
+	m->count = m->size;
+	return -1;
+}
+
 static void *single_start(struct seq_file *p, loff_t *pos)
 {
 	return NULL + (*pos == 0);
diff --git a/fs/smbfs/cache.c b/fs/smbfs/cache.c
index 8182f0542a21..8c177eb7e344 100644
--- a/fs/smbfs/cache.c
+++ b/fs/smbfs/cache.c
@@ -13,7 +13,6 @@
 #include <linux/errno.h>
 #include <linux/kernel.h>
 #include <linux/mm.h>
-#include <linux/dirent.h>
 #include <linux/smb_fs.h>
 #include <linux/pagemap.h>
 #include <linux/net.h>
diff --git a/fs/smbfs/file.c b/fs/smbfs/file.c
index 2294783320cb..e4f8d51a5553 100644
--- a/fs/smbfs/file.c
+++ b/fs/smbfs/file.c
@@ -408,7 +408,7 @@ smb_file_release(struct inode *inode, struct file * file)
  * privileges, so we need our own check for this.
  */
 static int
-smb_file_permission(struct inode *inode, int mask, struct nameidata *nd)
+smb_file_permission(struct inode *inode, int mask)
 {
 	int mode = inode->i_mode;
 	int error = 0;
@@ -417,7 +417,7 @@ smb_file_permission(struct inode *inode, int mask, struct nameidata *nd)
 
 	/* Look at user permissions */
 	mode >>= 6;
-	if ((mode & 7 & mask) != mask)
+	if (mask & ~mode & (MAY_READ | MAY_WRITE | MAY_EXEC))
 		error = -EACCES;
 	return error;
 }
diff --git a/fs/smbfs/inode.c b/fs/smbfs/inode.c
index 376ef3ee6ed7..3528f40ffb0f 100644
--- a/fs/smbfs/inode.c
+++ b/fs/smbfs/inode.c
@@ -67,7 +67,7 @@ static void smb_destroy_inode(struct inode *inode)
 	kmem_cache_free(smb_inode_cachep, SMB_I(inode));
 }
 
-static void init_once(struct kmem_cache *cachep, void *foo)
+static void init_once(void *foo)
 {
 	struct smb_inode_info *ei = (struct smb_inode_info *) foo;
 
diff --git a/fs/smbfs/proc.c b/fs/smbfs/proc.c
index d517a27b7f4b..ee536e8a649a 100644
--- a/fs/smbfs/proc.c
+++ b/fs/smbfs/proc.c
@@ -16,7 +16,6 @@
 #include <linux/stat.h>
 #include <linux/fcntl.h>
 #include <linux/dcache.h>
-#include <linux/dirent.h>
 #include <linux/nls.h>
 #include <linux/smp_lock.h>
 #include <linux/net.h>
diff --git a/fs/splice.c b/fs/splice.c
index 399442179d89..1bbc6f4bb09c 100644
--- a/fs/splice.c
+++ b/fs/splice.c
@@ -371,7 +371,7 @@ __generic_file_splice_read(struct file *in, loff_t *ppos,
 			 * for an in-flight io page
 			 */
 			if (flags & SPLICE_F_NONBLOCK) {
-				if (TestSetPageLocked(page)) {
+				if (!trylock_page(page)) {
 					error = -EAGAIN;
 					break;
 				}
@@ -772,7 +772,7 @@ generic_file_splice_write_nolock(struct pipe_inode_info *pipe, struct file *out,
 	ssize_t ret;
 	int err;
 
-	err = remove_suid(out->f_path.dentry);
+	err = file_remove_suid(out);
 	if (unlikely(err))
 		return err;
 
@@ -830,7 +830,7 @@ generic_file_splice_write(struct pipe_inode_info *pipe, struct file *out,
 	ssize_t ret;
 
 	inode_double_lock(inode, pipe->inode);
-	ret = remove_suid(out->f_path.dentry);
+	ret = file_remove_suid(out);
 	if (likely(!ret))
 		ret = __splice_from_pipe(pipe, &sd, pipe_to_file);
 	inode_double_unlock(inode, pipe->inode);
@@ -1161,36 +1161,6 @@ static long do_splice(struct file *in, loff_t __user *off_in,
 }
 
 /*
- * Do a copy-from-user while holding the mmap_semaphore for reading, in a
- * manner safe from deadlocking with simultaneous mmap() (grabbing mmap_sem
- * for writing) and page faulting on the user memory pointed to by src.
- * This assumes that we will very rarely hit the partial != 0 path, or this
- * will not be a win.
- */
-static int copy_from_user_mmap_sem(void *dst, const void __user *src, size_t n)
-{
-	int partial;
-
-	if (!access_ok(VERIFY_READ, src, n))
-		return -EFAULT;
-
-	pagefault_disable();
-	partial = __copy_from_user_inatomic(dst, src, n);
-	pagefault_enable();
-
-	/*
-	 * Didn't copy everything, drop the mmap_sem and do a faulting copy
-	 */
-	if (unlikely(partial)) {
-		up_read(&current->mm->mmap_sem);
-		partial = copy_from_user(dst, src, n);
-		down_read(&current->mm->mmap_sem);
-	}
-
-	return partial;
-}
-
-/*
  * Map an iov into an array of pages and offset/length tupples. With the
  * partial_page structure, we can map several non-contiguous ranges into
  * our ones pages[] map instead of splitting that operation into pieces.
@@ -1203,8 +1173,6 @@ static int get_iovec_page_array(const struct iovec __user *iov,
 {
 	int buffers = 0, error = 0;
 
-	down_read(&current->mm->mmap_sem);
-
 	while (nr_vecs) {
 		unsigned long off, npages;
 		struct iovec entry;
@@ -1213,7 +1181,7 @@ static int get_iovec_page_array(const struct iovec __user *iov,
 		int i;
 
 		error = -EFAULT;
-		if (copy_from_user_mmap_sem(&entry, iov, sizeof(entry)))
+		if (copy_from_user(&entry, iov, sizeof(entry)))
 			break;
 
 		base = entry.iov_base;
@@ -1247,9 +1215,8 @@ static int get_iovec_page_array(const struct iovec __user *iov,
 		if (npages > PIPE_BUFFERS - buffers)
 			npages = PIPE_BUFFERS - buffers;
 
-		error = get_user_pages(current, current->mm,
-				       (unsigned long) base, npages, 0, 0,
-				       &pages[buffers], NULL);
+		error = get_user_pages_fast((unsigned long)base, npages,
+					0, &pages[buffers]);
 
 		if (unlikely(error <= 0))
 			break;
@@ -1288,8 +1255,6 @@ static int get_iovec_page_array(const struct iovec __user *iov,
 		iov++;
 	}
 
-	up_read(&current->mm->mmap_sem);
-
 	if (buffers)
 		return buffers;
 
diff --git a/fs/stat.c b/fs/stat.c
index 9cf41f719d50..7c46fbeb8b76 100644
--- a/fs/stat.c
+++ b/fs/stat.c
@@ -57,13 +57,13 @@ EXPORT_SYMBOL(vfs_getattr);
 
 int vfs_stat_fd(int dfd, char __user *name, struct kstat *stat)
 {
-	struct nameidata nd;
+	struct path path;
 	int error;
 
-	error = __user_walk_fd(dfd, name, LOOKUP_FOLLOW, &nd);
+	error = user_path_at(dfd, name, LOOKUP_FOLLOW, &path);
 	if (!error) {
-		error = vfs_getattr(nd.path.mnt, nd.path.dentry, stat);
-		path_put(&nd.path);
+		error = vfs_getattr(path.mnt, path.dentry, stat);
+		path_put(&path);
 	}
 	return error;
 }
@@ -77,13 +77,13 @@ EXPORT_SYMBOL(vfs_stat);
 
 int vfs_lstat_fd(int dfd, char __user *name, struct kstat *stat)
 {
-	struct nameidata nd;
+	struct path path;
 	int error;
 
-	error = __user_walk_fd(dfd, name, 0, &nd);
+	error = user_path_at(dfd, name, 0, &path);
 	if (!error) {
-		error = vfs_getattr(nd.path.mnt, nd.path.dentry, stat);
-		path_put(&nd.path);
+		error = vfs_getattr(path.mnt, path.dentry, stat);
+		path_put(&path);
 	}
 	return error;
 }
@@ -291,29 +291,29 @@ asmlinkage long sys_newfstat(unsigned int fd, struct stat __user *statbuf)
 	return error;
 }
 
-asmlinkage long sys_readlinkat(int dfd, const char __user *path,
+asmlinkage long sys_readlinkat(int dfd, const char __user *pathname,
 				char __user *buf, int bufsiz)
 {
-	struct nameidata nd;
+	struct path path;
 	int error;
 
 	if (bufsiz <= 0)
 		return -EINVAL;
 
-	error = __user_walk_fd(dfd, path, 0, &nd);
+	error = user_path_at(dfd, pathname, 0, &path);
 	if (!error) {
-		struct inode *inode = nd.path.dentry->d_inode;
+		struct inode *inode = path.dentry->d_inode;
 
 		error = -EINVAL;
 		if (inode->i_op && inode->i_op->readlink) {
-			error = security_inode_readlink(nd.path.dentry);
+			error = security_inode_readlink(path.dentry);
 			if (!error) {
-				touch_atime(nd.path.mnt, nd.path.dentry);
-				error = inode->i_op->readlink(nd.path.dentry,
+				touch_atime(path.mnt, path.dentry);
+				error = inode->i_op->readlink(path.dentry,
 							      buf, bufsiz);
 			}
 		}
-		path_put(&nd.path);
+		path_put(&path);
 	}
 	return error;
 }
diff --git a/fs/sysfs/dir.c b/fs/sysfs/dir.c
index c1a7efb310bf..aedaeba82ae5 100644
--- a/fs/sysfs/dir.c
+++ b/fs/sysfs/dir.c
@@ -459,11 +459,8 @@ int sysfs_add_one(struct sysfs_addrm_cxt *acxt, struct sysfs_dirent *sd)
 	int ret;
 
 	ret = __sysfs_add_one(acxt, sd);
-	if (ret == -EEXIST) {
-		printk(KERN_WARNING "sysfs: duplicate filename '%s' "
+	WARN(ret == -EEXIST, KERN_WARNING "sysfs: duplicate filename '%s' "
 		       "can not be created\n", sd->s_name);
-		WARN_ON(1);
-	}
 	return ret;
 }
 
diff --git a/fs/sysfs/file.c b/fs/sysfs/file.c
index 3f07893ff896..c9e4e5091da1 100644
--- a/fs/sysfs/file.c
+++ b/fs/sysfs/file.c
@@ -337,9 +337,8 @@ static int sysfs_open_file(struct inode *inode, struct file *file)
 	if (kobj->ktype && kobj->ktype->sysfs_ops)
 		ops = kobj->ktype->sysfs_ops;
 	else {
-		printk(KERN_ERR "missing sysfs attribute operations for "
+		WARN(1, KERN_ERR "missing sysfs attribute operations for "
 		       "kobject: %s\n", kobject_name(kobj));
-		WARN_ON(1);
 		goto err_out;
 	}
 
diff --git a/fs/sysfs/group.c b/fs/sysfs/group.c
index eeba38417b1d..fe611949a7f7 100644
--- a/fs/sysfs/group.c
+++ b/fs/sysfs/group.c
@@ -134,9 +134,8 @@ void sysfs_remove_group(struct kobject * kobj,
 	if (grp->name) {
 		sd = sysfs_get_dirent(dir_sd, grp->name);
 		if (!sd) {
-			printk(KERN_WARNING "sysfs group %p not found for "
+			WARN(!sd, KERN_WARNING "sysfs group %p not found for "
 				"kobject '%s'\n", grp, kobject_name(kobj));
-			WARN_ON(!sd);
 			return;
 		}
 	} else
diff --git a/fs/sysv/inode.c b/fs/sysv/inode.c
index c5d60de0658f..df0d435baa48 100644
--- a/fs/sysv/inode.c
+++ b/fs/sysv/inode.c
@@ -326,7 +326,7 @@ static void sysv_destroy_inode(struct inode *inode)
 	kmem_cache_free(sysv_inode_cachep, SYSV_I(inode));
 }
 
-static void init_once(struct kmem_cache *cachep, void *p)
+static void init_once(void *p)
 {
 	struct sysv_inode_info *si = (struct sysv_inode_info *)p;
 
diff --git a/fs/ubifs/budget.c b/fs/ubifs/budget.c
index d81fb9ed2b8e..154098157473 100644
--- a/fs/ubifs/budget.c
+++ b/fs/ubifs/budget.c
@@ -263,8 +263,8 @@ int ubifs_calc_min_idx_lebs(struct ubifs_info *c)
 
 	idx_size = c->old_idx_sz + c->budg_idx_growth + c->budg_uncommitted_idx;
 
-	/* And make sure we have twice the index size of space reserved */
-	idx_size <<= 1;
+	/* And make sure we have thrice the index size of space reserved */
+	idx_size = idx_size + (idx_size << 1);
 
 	/*
 	 * We do not maintain 'old_idx_size' as 'old_idx_lebs'/'old_idx_bytes'
@@ -388,11 +388,11 @@ static int can_use_rp(struct ubifs_info *c)
  * This function makes sure UBIFS has enough free eraseblocks for index growth
  * and data.
  *
- * When budgeting index space, UBIFS reserves twice as more LEBs as the index
+ * When budgeting index space, UBIFS reserves thrice as many LEBs as the index
  * would take if it was consolidated and written to the flash. This guarantees
  * that the "in-the-gaps" commit method always succeeds and UBIFS will always
  * be able to commit dirty index. So this function basically adds amount of
- * budgeted index space to the size of the current index, multiplies this by 2,
+ * budgeted index space to the size of the current index, multiplies this by 3,
  * and makes sure this does not exceed the amount of free eraseblocks.
  *
  * Notes about @c->min_idx_lebs and @c->lst.idx_lebs variables:
@@ -543,8 +543,16 @@ int ubifs_budget_space(struct ubifs_info *c, struct ubifs_budget_req *req)
 	int err, idx_growth, data_growth, dd_growth;
 	struct retries_info ri;
 
+	ubifs_assert(req->new_page <= 1);
+	ubifs_assert(req->dirtied_page <= 1);
+	ubifs_assert(req->new_dent <= 1);
+	ubifs_assert(req->mod_dent <= 1);
+	ubifs_assert(req->new_ino <= 1);
+	ubifs_assert(req->new_ino_d <= UBIFS_MAX_INO_DATA);
 	ubifs_assert(req->dirtied_ino <= 4);
 	ubifs_assert(req->dirtied_ino_d <= UBIFS_MAX_INO_DATA * 4);
+	ubifs_assert(!(req->new_ino_d & 7));
+	ubifs_assert(!(req->dirtied_ino_d & 7));
 
 	data_growth = calc_data_growth(c, req);
 	dd_growth = calc_dd_growth(c, req);
@@ -618,8 +626,16 @@ again:
  */
 void ubifs_release_budget(struct ubifs_info *c, struct ubifs_budget_req *req)
 {
+	ubifs_assert(req->new_page <= 1);
+	ubifs_assert(req->dirtied_page <= 1);
+	ubifs_assert(req->new_dent <= 1);
+	ubifs_assert(req->mod_dent <= 1);
+	ubifs_assert(req->new_ino <= 1);
+	ubifs_assert(req->new_ino_d <= UBIFS_MAX_INO_DATA);
 	ubifs_assert(req->dirtied_ino <= 4);
 	ubifs_assert(req->dirtied_ino_d <= UBIFS_MAX_INO_DATA * 4);
+	ubifs_assert(!(req->new_ino_d & 7));
+	ubifs_assert(!(req->dirtied_ino_d & 7));
 	if (!req->recalculate) {
 		ubifs_assert(req->idx_growth >= 0);
 		ubifs_assert(req->data_growth >= 0);
@@ -647,7 +663,11 @@ void ubifs_release_budget(struct ubifs_info *c, struct ubifs_budget_req *req)
 
 	ubifs_assert(c->budg_idx_growth >= 0);
 	ubifs_assert(c->budg_data_growth >= 0);
+	ubifs_assert(c->budg_dd_growth >= 0);
 	ubifs_assert(c->min_idx_lebs < c->main_lebs);
+	ubifs_assert(!(c->budg_idx_growth & 7));
+	ubifs_assert(!(c->budg_data_growth & 7));
+	ubifs_assert(!(c->budg_dd_growth & 7));
 	spin_unlock(&c->space_lock);
 }
 
@@ -686,9 +706,10 @@ void ubifs_convert_page_budget(struct ubifs_info *c)
 void ubifs_release_dirty_inode_budget(struct ubifs_info *c,
 				      struct ubifs_inode *ui)
 {
-	struct ubifs_budget_req req = {.dd_growth = c->inode_budget,
-				       .dirtied_ino_d = ui->data_len};
+	struct ubifs_budget_req req;
 
+	memset(&req, 0, sizeof(struct ubifs_budget_req));
+	req.dd_growth = c->inode_budget + ALIGN(ui->data_len, 8);
 	ubifs_release_budget(c, &req);
 }
 
diff --git a/fs/ubifs/commit.c b/fs/ubifs/commit.c
index 3b516316c9b3..0a6aa2cc78f0 100644
--- a/fs/ubifs/commit.c
+++ b/fs/ubifs/commit.c
@@ -74,6 +74,7 @@ static int do_commit(struct ubifs_info *c)
 			goto out_up;
 	}
 
+	c->cmt_no += 1;
 	err = ubifs_gc_start_commit(c);
 	if (err)
 		goto out_up;
@@ -115,7 +116,7 @@ static int do_commit(struct ubifs_info *c)
 		goto out;
 
 	mutex_lock(&c->mst_mutex);
-	c->mst_node->cmt_no      = cpu_to_le64(++c->cmt_no);
+	c->mst_node->cmt_no      = cpu_to_le64(c->cmt_no);
 	c->mst_node->log_lnum    = cpu_to_le32(new_ltail_lnum);
 	c->mst_node->root_lnum   = cpu_to_le32(zroot.lnum);
 	c->mst_node->root_offs   = cpu_to_le32(zroot.offs);
diff --git a/fs/ubifs/debug.c b/fs/ubifs/debug.c
index 4e3aaeba4eca..b9cb77473758 100644
--- a/fs/ubifs/debug.c
+++ b/fs/ubifs/debug.c
@@ -568,8 +568,8 @@ void dbg_dump_budget_req(const struct ubifs_budget_req *req)
 void dbg_dump_lstats(const struct ubifs_lp_stats *lst)
 {
 	spin_lock(&dbg_lock);
-	printk(KERN_DEBUG "Lprops statistics: empty_lebs %d, idx_lebs  %d\n",
-	       lst->empty_lebs, lst->idx_lebs);
+	printk(KERN_DEBUG "(pid %d) Lprops statistics: empty_lebs %d, "
+	       "idx_lebs  %d\n", current->pid, lst->empty_lebs, lst->idx_lebs);
 	printk(KERN_DEBUG "\ttaken_empty_lebs %d, total_free %lld, "
 	       "total_dirty %lld\n", lst->taken_empty_lebs, lst->total_free,
 	       lst->total_dirty);
@@ -587,8 +587,8 @@ void dbg_dump_budg(struct ubifs_info *c)
 	struct ubifs_gced_idx_leb *idx_gc;
 
 	spin_lock(&dbg_lock);
-	printk(KERN_DEBUG "Budgeting info: budg_data_growth %lld, "
-	       "budg_dd_growth %lld, budg_idx_growth %lld\n",
+	printk(KERN_DEBUG "(pid %d) Budgeting info: budg_data_growth %lld, "
+	       "budg_dd_growth %lld, budg_idx_growth %lld\n", current->pid,
 	       c->budg_data_growth, c->budg_dd_growth, c->budg_idx_growth);
 	printk(KERN_DEBUG "\tdata budget sum %lld, total budget sum %lld, "
 	       "freeable_cnt %d\n", c->budg_data_growth + c->budg_dd_growth,
@@ -634,7 +634,7 @@ void dbg_dump_lprops(struct ubifs_info *c)
 	struct ubifs_lprops lp;
 	struct ubifs_lp_stats lst;
 
-	printk(KERN_DEBUG "Dumping LEB properties\n");
+	printk(KERN_DEBUG "(pid %d) Dumping LEB properties\n", current->pid);
 	ubifs_get_lp_stats(c, &lst);
 	dbg_dump_lstats(&lst);
 
@@ -655,7 +655,7 @@ void dbg_dump_leb(const struct ubifs_info *c, int lnum)
 	if (dbg_failure_mode)
 		return;
 
-	printk(KERN_DEBUG "Dumping LEB %d\n", lnum);
+	printk(KERN_DEBUG "(pid %d) Dumping LEB %d\n", current->pid, lnum);
 
 	sleb = ubifs_scan(c, lnum, 0, c->dbg_buf);
 	if (IS_ERR(sleb)) {
@@ -720,8 +720,8 @@ void dbg_dump_heap(struct ubifs_info *c, struct ubifs_lpt_heap *heap, int cat)
 {
 	int i;
 
-	printk(KERN_DEBUG "Dumping heap cat %d (%d elements)\n",
-	       cat, heap->cnt);
+	printk(KERN_DEBUG "(pid %d) Dumping heap cat %d (%d elements)\n",
+	       current->pid, cat, heap->cnt);
 	for (i = 0; i < heap->cnt; i++) {
 		struct ubifs_lprops *lprops = heap->arr[i];
 
@@ -736,7 +736,7 @@ void dbg_dump_pnode(struct ubifs_info *c, struct ubifs_pnode *pnode,
 {
 	int i;
 
-	printk(KERN_DEBUG "Dumping pnode:\n");
+	printk(KERN_DEBUG "(pid %d) Dumping pnode:\n", current->pid);
 	printk(KERN_DEBUG "\taddress %zx parent %zx cnext %zx\n",
 	       (size_t)pnode, (size_t)parent, (size_t)pnode->cnext);
 	printk(KERN_DEBUG "\tflags %lu iip %d level %d num %d\n",
@@ -755,7 +755,7 @@ void dbg_dump_tnc(struct ubifs_info *c)
 	int level;
 
 	printk(KERN_DEBUG "\n");
-	printk(KERN_DEBUG "Dumping the TNC tree\n");
+	printk(KERN_DEBUG "(pid %d) Dumping the TNC tree\n", current->pid);
 	znode = ubifs_tnc_levelorder_next(c->zroot.znode, NULL);
 	level = znode->level;
 	printk(KERN_DEBUG "== Level %d ==\n", level);
@@ -2208,16 +2208,17 @@ int dbg_leb_read(struct ubi_volume_desc *desc, int lnum, char *buf, int offset,
 int dbg_leb_write(struct ubi_volume_desc *desc, int lnum, const void *buf,
 		  int offset, int len, int dtype)
 {
-	int err;
+	int err, failing;
 
 	if (in_failure_mode(desc))
 		return -EIO;
-	if (do_fail(desc, lnum, 1))
+	failing = do_fail(desc, lnum, 1);
+	if (failing)
 		cut_data(buf, len);
 	err = ubi_leb_write(desc, lnum, buf, offset, len, dtype);
 	if (err)
 		return err;
-	if (in_failure_mode(desc))
+	if (failing)
 		return -EIO;
 	return 0;
 }
diff --git a/fs/ubifs/debug.h b/fs/ubifs/debug.h
index 3c4f1e93c9e0..50315fc57185 100644
--- a/fs/ubifs/debug.h
+++ b/fs/ubifs/debug.h
@@ -27,7 +27,7 @@
 
 #define UBIFS_DBG(op) op
 
-#define ubifs_assert(expr)  do {                                               \
+#define ubifs_assert(expr) do {                                                \
 	if (unlikely(!(expr))) {                                               \
 		printk(KERN_CRIT "UBIFS assert failed in %s at %u (pid %d)\n", \
 		       __func__, __LINE__, current->pid);                      \
@@ -73,50 +73,50 @@ const char *dbg_key_str1(const struct ubifs_info *c,
 			 const union ubifs_key *key);
 
 /*
- * DBGKEY macros require dbg_lock to be held, which it is in the dbg message
+ * DBGKEY macros require @dbg_lock to be held, which it is in the dbg message
  * macros.
  */
 #define DBGKEY(key) dbg_key_str0(c, (key))
 #define DBGKEY1(key) dbg_key_str1(c, (key))
 
 /* General messages */
-#define dbg_gen(fmt, ...)        dbg_do_msg(UBIFS_MSG_GEN, fmt, ##__VA_ARGS__)
+#define dbg_gen(fmt, ...)   dbg_do_msg(UBIFS_MSG_GEN, fmt, ##__VA_ARGS__)
 
 /* Additional journal messages */
-#define dbg_jnl(fmt, ...)        dbg_do_msg(UBIFS_MSG_JNL, fmt, ##__VA_ARGS__)
+#define dbg_jnl(fmt, ...)   dbg_do_msg(UBIFS_MSG_JNL, fmt, ##__VA_ARGS__)
 
 /* Additional TNC messages */
-#define dbg_tnc(fmt, ...)        dbg_do_msg(UBIFS_MSG_TNC, fmt, ##__VA_ARGS__)
+#define dbg_tnc(fmt, ...)   dbg_do_msg(UBIFS_MSG_TNC, fmt, ##__VA_ARGS__)
 
 /* Additional lprops messages */
-#define dbg_lp(fmt, ...)         dbg_do_msg(UBIFS_MSG_LP, fmt, ##__VA_ARGS__)
+#define dbg_lp(fmt, ...)    dbg_do_msg(UBIFS_MSG_LP, fmt, ##__VA_ARGS__)
 
 /* Additional LEB find messages */
-#define dbg_find(fmt, ...)       dbg_do_msg(UBIFS_MSG_FIND, fmt, ##__VA_ARGS__)
+#define dbg_find(fmt, ...)  dbg_do_msg(UBIFS_MSG_FIND, fmt, ##__VA_ARGS__)
 
 /* Additional mount messages */
-#define dbg_mnt(fmt, ...)        dbg_do_msg(UBIFS_MSG_MNT, fmt, ##__VA_ARGS__)
+#define dbg_mnt(fmt, ...)   dbg_do_msg(UBIFS_MSG_MNT, fmt, ##__VA_ARGS__)
 
 /* Additional I/O messages */
-#define dbg_io(fmt, ...)         dbg_do_msg(UBIFS_MSG_IO, fmt, ##__VA_ARGS__)
+#define dbg_io(fmt, ...)    dbg_do_msg(UBIFS_MSG_IO, fmt, ##__VA_ARGS__)
 
 /* Additional commit messages */
-#define dbg_cmt(fmt, ...)        dbg_do_msg(UBIFS_MSG_CMT, fmt, ##__VA_ARGS__)
+#define dbg_cmt(fmt, ...)   dbg_do_msg(UBIFS_MSG_CMT, fmt, ##__VA_ARGS__)
 
 /* Additional budgeting messages */
-#define dbg_budg(fmt, ...)       dbg_do_msg(UBIFS_MSG_BUDG, fmt, ##__VA_ARGS__)
+#define dbg_budg(fmt, ...)  dbg_do_msg(UBIFS_MSG_BUDG, fmt, ##__VA_ARGS__)
 
 /* Additional log messages */
-#define dbg_log(fmt, ...)        dbg_do_msg(UBIFS_MSG_LOG, fmt, ##__VA_ARGS__)
+#define dbg_log(fmt, ...)   dbg_do_msg(UBIFS_MSG_LOG, fmt, ##__VA_ARGS__)
 
 /* Additional gc messages */
-#define dbg_gc(fmt, ...)         dbg_do_msg(UBIFS_MSG_GC, fmt, ##__VA_ARGS__)
+#define dbg_gc(fmt, ...)    dbg_do_msg(UBIFS_MSG_GC, fmt, ##__VA_ARGS__)
 
 /* Additional scan messages */
-#define dbg_scan(fmt, ...)       dbg_do_msg(UBIFS_MSG_SCAN, fmt, ##__VA_ARGS__)
+#define dbg_scan(fmt, ...)  dbg_do_msg(UBIFS_MSG_SCAN, fmt, ##__VA_ARGS__)
 
 /* Additional recovery messages */
-#define dbg_rcvry(fmt, ...)      dbg_do_msg(UBIFS_MSG_RCVRY, fmt, ##__VA_ARGS__)
+#define dbg_rcvry(fmt, ...) dbg_do_msg(UBIFS_MSG_RCVRY, fmt, ##__VA_ARGS__)
 
 /*
  * Debugging message type flags (must match msg_type_names in debug.c).
@@ -239,34 +239,23 @@ typedef int (*dbg_leaf_callback)(struct ubifs_info *c,
 				 struct ubifs_zbranch *zbr, void *priv);
 typedef int (*dbg_znode_callback)(struct ubifs_info *c,
 				  struct ubifs_znode *znode, void *priv);
-
 int dbg_walk_index(struct ubifs_info *c, dbg_leaf_callback leaf_cb,
 		   dbg_znode_callback znode_cb, void *priv);
 
 /* Checking functions */
 
 int dbg_check_lprops(struct ubifs_info *c);
-
 int dbg_old_index_check_init(struct ubifs_info *c, struct ubifs_zbranch *zroot);
 int dbg_check_old_index(struct ubifs_info *c, struct ubifs_zbranch *zroot);
-
 int dbg_check_cats(struct ubifs_info *c);
-
 int dbg_check_ltab(struct ubifs_info *c);
-
 int dbg_check_synced_i_size(struct inode *inode);
-
 int dbg_check_dir_size(struct ubifs_info *c, const struct inode *dir);
-
 int dbg_check_tnc(struct ubifs_info *c, int extra);
-
 int dbg_check_idx_size(struct ubifs_info *c, long long idx_size);
-
 int dbg_check_filesystem(struct ubifs_info *c);
-
 void dbg_check_heap(struct ubifs_info *c, struct ubifs_lpt_heap *heap, int cat,
 		    int add_pos);
-
 int dbg_check_lprops(struct ubifs_info *c);
 int dbg_check_lpt_nodes(struct ubifs_info *c, struct ubifs_cnode *cnode,
 			int row, int col);
@@ -329,71 +318,77 @@ static inline int dbg_change(struct ubi_volume_desc *desc, int lnum,
 #else /* !CONFIG_UBIFS_FS_DEBUG */
 
 #define UBIFS_DBG(op)
-#define ubifs_assert(expr)                         ({})
-#define ubifs_assert_cmt_locked(c)
+
+/* Use "if (0)" to make compiler check arguments even if debugging is off */
+#define ubifs_assert(expr)  do {                                               \
+	if (0 && (expr))                                                       \
+		printk(KERN_CRIT "UBIFS assert failed in %s at %u (pid %d)\n", \
+		       __func__, __LINE__, current->pid);                      \
+} while (0)
+
+#define dbg_err(fmt, ...)   do {                                               \
+	if (0)                                                                 \
+		ubifs_err(fmt, ##__VA_ARGS__);                                 \
+} while (0)
+
+#define dbg_msg(fmt, ...) do {                                                 \
+	if (0)                                                                 \
+		printk(KERN_DEBUG "UBIFS DBG (pid %d): %s: " fmt "\n",         \
+		       current->pid, __func__, ##__VA_ARGS__);                 \
+} while (0)
+
 #define dbg_dump_stack()
-#define dbg_err(fmt, ...)                          ({})
-#define dbg_msg(fmt, ...)                          ({})
-#define dbg_key(c, key, fmt, ...)                  ({})
-
-#define dbg_gen(fmt, ...)                          ({})
-#define dbg_jnl(fmt, ...)                          ({})
-#define dbg_tnc(fmt, ...)                          ({})
-#define dbg_lp(fmt, ...)                           ({})
-#define dbg_find(fmt, ...)                         ({})
-#define dbg_mnt(fmt, ...)                          ({})
-#define dbg_io(fmt, ...)                           ({})
-#define dbg_cmt(fmt, ...)                          ({})
-#define dbg_budg(fmt, ...)                         ({})
-#define dbg_log(fmt, ...)                          ({})
-#define dbg_gc(fmt, ...)                           ({})
-#define dbg_scan(fmt, ...)                         ({})
-#define dbg_rcvry(fmt, ...)                        ({})
-
-#define dbg_ntype(type)                            ""
-#define dbg_cstate(cmt_state)                      ""
-#define dbg_get_key_dump(c, key)                   ({})
-#define dbg_dump_inode(c, inode)                   ({})
-#define dbg_dump_node(c, node)                     ({})
-#define dbg_dump_budget_req(req)                   ({})
-#define dbg_dump_lstats(lst)                       ({})
-#define dbg_dump_budg(c)                           ({})
-#define dbg_dump_lprop(c, lp)                      ({})
-#define dbg_dump_lprops(c)                         ({})
-#define dbg_dump_leb(c, lnum)                      ({})
-#define dbg_dump_znode(c, znode)                   ({})
-#define dbg_dump_heap(c, heap, cat)                ({})
-#define dbg_dump_pnode(c, pnode, parent, iip)      ({})
-#define dbg_dump_tnc(c)                            ({})
-#define dbg_dump_index(c)                          ({})
+#define ubifs_assert_cmt_locked(c)
 
-#define dbg_walk_index(c, leaf_cb, znode_cb, priv) 0
+#define dbg_gen(fmt, ...)   dbg_msg(fmt, ##__VA_ARGS__)
+#define dbg_jnl(fmt, ...)   dbg_msg(fmt, ##__VA_ARGS__)
+#define dbg_tnc(fmt, ...)   dbg_msg(fmt, ##__VA_ARGS__)
+#define dbg_lp(fmt, ...)    dbg_msg(fmt, ##__VA_ARGS__)
+#define dbg_find(fmt, ...)  dbg_msg(fmt, ##__VA_ARGS__)
+#define dbg_mnt(fmt, ...)   dbg_msg(fmt, ##__VA_ARGS__)
+#define dbg_io(fmt, ...)    dbg_msg(fmt, ##__VA_ARGS__)
+#define dbg_cmt(fmt, ...)   dbg_msg(fmt, ##__VA_ARGS__)
+#define dbg_budg(fmt, ...)  dbg_msg(fmt, ##__VA_ARGS__)
+#define dbg_log(fmt, ...)   dbg_msg(fmt, ##__VA_ARGS__)
+#define dbg_gc(fmt, ...)    dbg_msg(fmt, ##__VA_ARGS__)
+#define dbg_scan(fmt, ...)  dbg_msg(fmt, ##__VA_ARGS__)
+#define dbg_rcvry(fmt, ...) dbg_msg(fmt, ##__VA_ARGS__)
+
+#define DBGKEY(key)  ((char *)(key))
+#define DBGKEY1(key) ((char *)(key))
+
+#define dbg_ntype(type)                       ""
+#define dbg_cstate(cmt_state)                 ""
+#define dbg_get_key_dump(c, key)              ({})
+#define dbg_dump_inode(c, inode)              ({})
+#define dbg_dump_node(c, node)                ({})
+#define dbg_dump_budget_req(req)              ({})
+#define dbg_dump_lstats(lst)                  ({})
+#define dbg_dump_budg(c)                      ({})
+#define dbg_dump_lprop(c, lp)                 ({})
+#define dbg_dump_lprops(c)                    ({})
+#define dbg_dump_leb(c, lnum)                 ({})
+#define dbg_dump_znode(c, znode)              ({})
+#define dbg_dump_heap(c, heap, cat)           ({})
+#define dbg_dump_pnode(c, pnode, parent, iip) ({})
+#define dbg_dump_tnc(c)                       ({})
+#define dbg_dump_index(c)                     ({})
 
+#define dbg_walk_index(c, leaf_cb, znode_cb, priv) 0
 #define dbg_old_index_check_init(c, zroot)         0
 #define dbg_check_old_index(c, zroot)              0
-
 #define dbg_check_cats(c)                          0
-
 #define dbg_check_ltab(c)                          0
-
 #define dbg_check_synced_i_size(inode)             0
-
 #define dbg_check_dir_size(c, dir)                 0
-
 #define dbg_check_tnc(c, x)                        0
-
 #define dbg_check_idx_size(c, idx_size)            0
-
 #define dbg_check_filesystem(c)                    0
-
 #define dbg_check_heap(c, heap, cat, add_pos)      ({})
-
 #define dbg_check_lprops(c)                        0
 #define dbg_check_lpt_nodes(c, cnode, row, col)    0
-
 #define dbg_force_in_the_gaps_enabled              0
 #define dbg_force_in_the_gaps()                    0
-
 #define dbg_failure_mode                           0
 #define dbg_failure_mode_registration(c)           ({})
 #define dbg_failure_mode_deregistration(c)         ({})
diff --git a/fs/ubifs/dir.c b/fs/ubifs/dir.c
index e90374be7d3b..5c96f1fb7016 100644
--- a/fs/ubifs/dir.c
+++ b/fs/ubifs/dir.c
@@ -165,7 +165,6 @@ struct inode *ubifs_new_inode(struct ubifs_info *c, const struct inode *dir,
 	}
 
 	inode->i_ino = ++c->highest_inum;
-	inode->i_generation = ++c->vfs_gen;
 	/*
 	 * The creation sequence number remains with this inode for its
 	 * lifetime. All nodes for this inode have a greater sequence number,
@@ -220,15 +219,7 @@ static struct dentry *ubifs_lookup(struct inode *dir, struct dentry *dentry,
 
 	err = ubifs_tnc_lookup_nm(c, &key, dent, &dentry->d_name);
 	if (err) {
-		/*
-		 * Do not hash the direntry if parent 'i_nlink' is zero, because
-		 * this has side-effects - '->delete_inode()' call will not be
-		 * called for the parent orphan inode, because 'd_count' of its
-		 * direntry will stay 1 (it'll be negative direntry I guess)
-		 * and prevent 'iput_final()' until the dentry is destroyed due
-		 * to unmount or memory pressure.
-		 */
-		if (err == -ENOENT && dir->i_nlink != 0) {
+		if (err == -ENOENT) {
 			dbg_gen("not found");
 			goto done;
 		}
@@ -525,7 +516,7 @@ static int ubifs_link(struct dentry *old_dentry, struct inode *dir,
 	struct ubifs_inode *dir_ui = ubifs_inode(dir);
 	int err, sz_change = CALC_DENT_SIZE(dentry->d_name.len);
 	struct ubifs_budget_req req = { .new_dent = 1, .dirtied_ino = 2,
-					.dirtied_ino_d = ui->data_len };
+				.dirtied_ino_d = ALIGN(ui->data_len, 8) };
 
 	/*
 	 * Budget request settings: new direntry, changing the target inode,
@@ -727,8 +718,7 @@ static int ubifs_mkdir(struct inode *dir, struct dentry *dentry, int mode)
 	struct ubifs_inode *dir_ui = ubifs_inode(dir);
 	struct ubifs_info *c = dir->i_sb->s_fs_info;
 	int err, sz_change = CALC_DENT_SIZE(dentry->d_name.len);
-	struct ubifs_budget_req req = { .new_ino = 1, .new_dent = 1,
-					.dirtied_ino_d = 1 };
+	struct ubifs_budget_req req = { .new_ino = 1, .new_dent = 1 };
 
 	/*
 	 * Budget request settings: new inode, new direntry and changing parent
@@ -789,7 +779,8 @@ static int ubifs_mknod(struct inode *dir, struct dentry *dentry,
 	int sz_change = CALC_DENT_SIZE(dentry->d_name.len);
 	int err, devlen = 0;
 	struct ubifs_budget_req req = { .new_ino = 1, .new_dent = 1,
-					.new_ino_d = devlen, .dirtied_ino = 1 };
+					.new_ino_d = ALIGN(devlen, 8),
+					.dirtied_ino = 1 };
 
 	/*
 	 * Budget request settings: new inode, new direntry and changing parent
@@ -863,7 +854,8 @@ static int ubifs_symlink(struct inode *dir, struct dentry *dentry,
 	int err, len = strlen(symname);
 	int sz_change = CALC_DENT_SIZE(dentry->d_name.len);
 	struct ubifs_budget_req req = { .new_ino = 1, .new_dent = 1,
-					.new_ino_d = len, .dirtied_ino = 1 };
+					.new_ino_d = ALIGN(len, 8),
+					.dirtied_ino = 1 };
 
 	/*
 	 * Budget request settings: new inode, new direntry and changing parent
@@ -1012,7 +1004,7 @@ static int ubifs_rename(struct inode *old_dir, struct dentry *old_dentry,
 	struct ubifs_budget_req req = { .new_dent = 1, .mod_dent = 1,
 					.dirtied_ino = 3 };
 	struct ubifs_budget_req ino_req = { .dirtied_ino = 1,
-				.dirtied_ino_d = old_inode_ui->data_len };
+			.dirtied_ino_d = ALIGN(old_inode_ui->data_len, 8) };
 	struct timespec time;
 
 	/*
diff --git a/fs/ubifs/file.c b/fs/ubifs/file.c
index 005a3b854d96..4071d1cae29f 100644
--- a/fs/ubifs/file.c
+++ b/fs/ubifs/file.c
@@ -53,6 +53,7 @@
 
 #include "ubifs.h"
 #include <linux/mount.h>
+#include <linux/namei.h>
 
 static int read_block(struct inode *inode, void *addr, unsigned int block,
 		      struct ubifs_data_node *dn)
@@ -889,7 +890,7 @@ static int do_setattr(struct ubifs_info *c, struct inode *inode,
 	loff_t new_size = attr->ia_size;
 	struct ubifs_inode *ui = ubifs_inode(inode);
 	struct ubifs_budget_req req = { .dirtied_ino = 1,
-					.dirtied_ino_d = ui->data_len };
+				.dirtied_ino_d = ALIGN(ui->data_len, 8) };
 
 	err = ubifs_budget_space(c, &req);
 	if (err)
@@ -940,7 +941,8 @@ int ubifs_setattr(struct dentry *dentry, struct iattr *attr)
 	struct inode *inode = dentry->d_inode;
 	struct ubifs_info *c = inode->i_sb->s_fs_info;
 
-	dbg_gen("ino %lu, ia_valid %#x", inode->i_ino, attr->ia_valid);
+	dbg_gen("ino %lu, mode %#x, ia_valid %#x",
+		inode->i_ino, inode->i_mode, attr->ia_valid);
 	err = inode_change_ok(inode, attr);
 	if (err)
 		return err;
@@ -1050,7 +1052,7 @@ static int update_mctime(struct ubifs_info *c, struct inode *inode)
 	if (mctime_update_needed(inode, &now)) {
 		int err, release;
 		struct ubifs_budget_req req = { .dirtied_ino = 1,
-						.dirtied_ino_d = ui->data_len };
+				.dirtied_ino_d = ALIGN(ui->data_len, 8) };
 
 		err = ubifs_budget_space(c, &req);
 		if (err)
@@ -1269,6 +1271,7 @@ struct file_operations ubifs_file_operations = {
 	.fsync          = ubifs_fsync,
 	.unlocked_ioctl = ubifs_ioctl,
 	.splice_read	= generic_file_splice_read,
+	.splice_write	= generic_file_splice_write,
 #ifdef CONFIG_COMPAT
 	.compat_ioctl   = ubifs_compat_ioctl,
 #endif
diff --git a/fs/ubifs/find.c b/fs/ubifs/find.c
index 10394c548367..adee7b5ddeab 100644
--- a/fs/ubifs/find.c
+++ b/fs/ubifs/find.c
@@ -290,9 +290,14 @@ int ubifs_find_dirty_leb(struct ubifs_info *c, struct ubifs_lprops *ret_lp,
 		idx_lp = idx_heap->arr[0];
 		sum = idx_lp->free + idx_lp->dirty;
 		/*
-		 * Since we reserve twice as more space for the index than it
+		 * Since we reserve thrice as much space for the index than it
 		 * actually takes, it does not make sense to pick indexing LEBs
-		 * with less than half LEB of dirty space.
+		 * with less than, say, half LEB of dirty space. May be half is
+		 * not the optimal boundary - this should be tested and
+		 * checked. This boundary should determine how much we use
+		 * in-the-gaps to consolidate the index comparing to how much
+		 * we use garbage collector to consolidate it. The "half"
+		 * criteria just feels to be fine.
 		 */
 		if (sum < min_space || sum < c->half_leb_size)
 			idx_lp = NULL;
diff --git a/fs/ubifs/io.c b/fs/ubifs/io.c
index 3374f91b6709..054363f2b207 100644
--- a/fs/ubifs/io.c
+++ b/fs/ubifs/io.c
@@ -54,6 +54,20 @@
 #include "ubifs.h"
 
 /**
+ * ubifs_ro_mode - switch UBIFS to read read-only mode.
+ * @c: UBIFS file-system description object
+ * @err: error code which is the reason of switching to R/O mode
+ */
+void ubifs_ro_mode(struct ubifs_info *c, int err)
+{
+	if (!c->ro_media) {
+		c->ro_media = 1;
+		ubifs_warn("switched to read-only mode, error %d", err);
+		dbg_dump_stack();
+	}
+}
+
+/**
  * ubifs_check_node - check node.
  * @c: UBIFS file-system description object
  * @buf: node to check
diff --git a/fs/ubifs/journal.c b/fs/ubifs/journal.c
index 283155abe5f5..22993f867d19 100644
--- a/fs/ubifs/journal.c
+++ b/fs/ubifs/journal.c
@@ -447,13 +447,11 @@ static int get_dent_type(int mode)
  * @ino: buffer in which to pack inode node
  * @inode: inode to pack
  * @last: indicates the last node of the group
- * @last_reference: non-zero if this is a deletion inode
  */
 static void pack_inode(struct ubifs_info *c, struct ubifs_ino_node *ino,
-		       const struct inode *inode, int last,
-		       int last_reference)
+		       const struct inode *inode, int last)
 {
-	int data_len = 0;
+	int data_len = 0, last_reference = !inode->i_nlink;
 	struct ubifs_inode *ui = ubifs_inode(inode);
 
 	ino->ch.node_type = UBIFS_INO_NODE;
@@ -596,9 +594,9 @@ int ubifs_jnl_update(struct ubifs_info *c, const struct inode *dir,
 	ubifs_prep_grp_node(c, dent, dlen, 0);
 
 	ino = (void *)dent + aligned_dlen;
-	pack_inode(c, ino, inode, 0, last_reference);
+	pack_inode(c, ino, inode, 0);
 	ino = (void *)ino + aligned_ilen;
-	pack_inode(c, ino, dir, 1, 0);
+	pack_inode(c, ino, dir, 1);
 
 	if (last_reference) {
 		err = ubifs_add_orphan(c, inode->i_ino);
@@ -606,6 +604,7 @@ int ubifs_jnl_update(struct ubifs_info *c, const struct inode *dir,
 			release_head(c, BASEHD);
 			goto out_finish;
 		}
+		ui->del_cmtno = c->cmt_no;
 	}
 
 	err = write_head(c, BASEHD, dent, len, &lnum, &dent_offs, sync);
@@ -750,30 +749,25 @@ out_free:
  * ubifs_jnl_write_inode - flush inode to the journal.
  * @c: UBIFS file-system description object
  * @inode: inode to flush
- * @deletion: inode has been deleted
  *
  * This function writes inode @inode to the journal. If the inode is
  * synchronous, it also synchronizes the write-buffer. Returns zero in case of
  * success and a negative error code in case of failure.
  */
-int ubifs_jnl_write_inode(struct ubifs_info *c, const struct inode *inode,
-			  int deletion)
+int ubifs_jnl_write_inode(struct ubifs_info *c, const struct inode *inode)
 {
-	int err, len, lnum, offs, sync = 0;
+	int err, lnum, offs;
 	struct ubifs_ino_node *ino;
 	struct ubifs_inode *ui = ubifs_inode(inode);
+	int sync = 0, len = UBIFS_INO_NODE_SZ, last_reference = !inode->i_nlink;
 
-	dbg_jnl("ino %lu%s", inode->i_ino,
-		deletion ? " (last reference)" : "");
-	if (deletion)
-		ubifs_assert(inode->i_nlink == 0);
+	dbg_jnl("ino %lu, nlink %u", inode->i_ino, inode->i_nlink);
 
-	len = UBIFS_INO_NODE_SZ;
 	/*
 	 * If the inode is being deleted, do not write the attached data. No
 	 * need to synchronize the write-buffer either.
 	 */
-	if (!deletion) {
+	if (!last_reference) {
 		len += ui->data_len;
 		sync = IS_SYNC(inode);
 	}
@@ -786,7 +780,7 @@ int ubifs_jnl_write_inode(struct ubifs_info *c, const struct inode *inode,
 	if (err)
 		goto out_free;
 
-	pack_inode(c, ino, inode, 1, deletion);
+	pack_inode(c, ino, inode, 1);
 	err = write_head(c, BASEHD, ino, len, &lnum, &offs, sync);
 	if (err)
 		goto out_release;
@@ -795,7 +789,7 @@ int ubifs_jnl_write_inode(struct ubifs_info *c, const struct inode *inode,
 					  inode->i_ino);
 	release_head(c, BASEHD);
 
-	if (deletion) {
+	if (last_reference) {
 		err = ubifs_tnc_remove_ino(c, inode->i_ino);
 		if (err)
 			goto out_ro;
@@ -828,6 +822,65 @@ out_free:
 }
 
 /**
+ * ubifs_jnl_delete_inode - delete an inode.
+ * @c: UBIFS file-system description object
+ * @inode: inode to delete
+ *
+ * This function deletes inode @inode which includes removing it from orphans,
+ * deleting it from TNC and, in some cases, writing a deletion inode to the
+ * journal.
+ *
+ * When regular file inodes are unlinked or a directory inode is removed, the
+ * 'ubifs_jnl_update()' function writes a corresponding deletion inode and
+ * direntry to the media, and adds the inode to orphans. After this, when the
+ * last reference to this inode has been dropped, this function is called. In
+ * general, it has to write one more deletion inode to the media, because if
+ * a commit happened between 'ubifs_jnl_update()' and
+ * 'ubifs_jnl_delete_inode()', the deletion inode is not in the journal
+ * anymore, and in fact it might not be on the flash anymore, because it might
+ * have been garbage-collected already. And for optimization reasons UBIFS does
+ * not read the orphan area if it has been unmounted cleanly, so it would have
+ * no indication in the journal that there is a deleted inode which has to be
+ * removed from TNC.
+ *
+ * However, if there was no commit between 'ubifs_jnl_update()' and
+ * 'ubifs_jnl_delete_inode()', then there is no need to write the deletion
+ * inode to the media for the second time. And this is quite a typical case.
+ *
+ * This function returns zero in case of success and a negative error code in
+ * case of failure.
+ */
+int ubifs_jnl_delete_inode(struct ubifs_info *c, const struct inode *inode)
+{
+	int err;
+	struct ubifs_inode *ui = ubifs_inode(inode);
+
+	ubifs_assert(inode->i_nlink == 0);
+
+	if (ui->del_cmtno != c->cmt_no)
+		/* A commit happened for sure */
+		return ubifs_jnl_write_inode(c, inode);
+
+	down_read(&c->commit_sem);
+	/*
+	 * Check commit number again, because the first test has been done
+	 * without @c->commit_sem, so a commit might have happened.
+	 */
+	if (ui->del_cmtno != c->cmt_no) {
+		up_read(&c->commit_sem);
+		return ubifs_jnl_write_inode(c, inode);
+	}
+
+	err = ubifs_tnc_remove_ino(c, inode->i_ino);
+	if (err)
+		ubifs_ro_mode(c, err);
+	else
+		ubifs_delete_orphan(c, inode->i_ino);
+	up_read(&c->commit_sem);
+	return err;
+}
+
+/**
  * ubifs_jnl_rename - rename a directory entry.
  * @c: UBIFS file-system description object
  * @old_dir: parent inode of directory entry to rename
@@ -917,16 +970,16 @@ int ubifs_jnl_rename(struct ubifs_info *c, const struct inode *old_dir,
 
 	p = (void *)dent2 + aligned_dlen2;
 	if (new_inode) {
-		pack_inode(c, p, new_inode, 0, last_reference);
+		pack_inode(c, p, new_inode, 0);
 		p += ALIGN(ilen, 8);
 	}
 
 	if (!move)
-		pack_inode(c, p, old_dir, 1, 0);
+		pack_inode(c, p, old_dir, 1);
 	else {
-		pack_inode(c, p, old_dir, 0, 0);
+		pack_inode(c, p, old_dir, 0);
 		p += ALIGN(plen, 8);
-		pack_inode(c, p, new_dir, 1, 0);
+		pack_inode(c, p, new_dir, 1);
 	}
 
 	if (last_reference) {
@@ -935,6 +988,7 @@ int ubifs_jnl_rename(struct ubifs_info *c, const struct inode *old_dir,
 			release_head(c, BASEHD);
 			goto out_finish;
 		}
+		new_ui->del_cmtno = c->cmt_no;
 	}
 
 	err = write_head(c, BASEHD, dent, len, &lnum, &offs, sync);
@@ -1131,7 +1185,7 @@ int ubifs_jnl_truncate(struct ubifs_info *c, const struct inode *inode,
 	if (err)
 		goto out_free;
 
-	pack_inode(c, ino, inode, 0, 0);
+	pack_inode(c, ino, inode, 0);
 	ubifs_prep_grp_node(c, trun, UBIFS_TRUN_NODE_SZ, dlen ? 0 : 1);
 	if (dlen)
 		ubifs_prep_grp_node(c, dn, dlen, 1);
@@ -1251,9 +1305,9 @@ int ubifs_jnl_delete_xattr(struct ubifs_info *c, const struct inode *host,
 	ubifs_prep_grp_node(c, xent, xlen, 0);
 
 	ino = (void *)xent + aligned_xlen;
-	pack_inode(c, ino, inode, 0, 1);
+	pack_inode(c, ino, inode, 0);
 	ino = (void *)ino + UBIFS_INO_NODE_SZ;
-	pack_inode(c, ino, host, 1, 0);
+	pack_inode(c, ino, host, 1);
 
 	err = write_head(c, BASEHD, xent, len, &lnum, &xent_offs, sync);
 	if (!sync && !err)
@@ -1320,7 +1374,7 @@ int ubifs_jnl_change_xattr(struct ubifs_info *c, const struct inode *inode,
 			   const struct inode *host)
 {
 	int err, len1, len2, aligned_len, aligned_len1, lnum, offs;
-	struct ubifs_inode *host_ui = ubifs_inode(inode);
+	struct ubifs_inode *host_ui = ubifs_inode(host);
 	struct ubifs_ino_node *ino;
 	union ubifs_key key;
 	int sync = IS_DIRSYNC(host);
@@ -1344,8 +1398,8 @@ int ubifs_jnl_change_xattr(struct ubifs_info *c, const struct inode *inode,
 	if (err)
 		goto out_free;
 
-	pack_inode(c, ino, host, 0, 0);
-	pack_inode(c, (void *)ino + aligned_len1, inode, 1, 0);
+	pack_inode(c, ino, host, 0);
+	pack_inode(c, (void *)ino + aligned_len1, inode, 1);
 
 	err = write_head(c, BASEHD, ino, aligned_len, &lnum, &offs, 0);
 	if (!sync && !err) {
diff --git a/fs/ubifs/log.c b/fs/ubifs/log.c
index 36857b9ed59e..3e0aa7367556 100644
--- a/fs/ubifs/log.c
+++ b/fs/ubifs/log.c
@@ -317,6 +317,8 @@ int ubifs_add_bud_to_log(struct ubifs_info *c, int jhead, int lnum, int offs)
 	return 0;
 
 out_unlock:
+	if (err != -EAGAIN)
+		ubifs_ro_mode(c, err);
 	mutex_unlock(&c->log_mutex);
 	kfree(ref);
 	kfree(bud);
@@ -410,7 +412,7 @@ int ubifs_log_start_commit(struct ubifs_info *c, int *ltail_lnum)
 		return -ENOMEM;
 
 	cs->ch.node_type = UBIFS_CS_NODE;
-	cs->cmt_no = cpu_to_le64(c->cmt_no + 1);
+	cs->cmt_no = cpu_to_le64(c->cmt_no);
 	ubifs_prepare_node(c, cs, UBIFS_CS_NODE_SZ, 0);
 
 	/*
diff --git a/fs/ubifs/misc.h b/fs/ubifs/misc.h
index 4beccfc256d2..87dabf9fe742 100644
--- a/fs/ubifs/misc.h
+++ b/fs/ubifs/misc.h
@@ -80,20 +80,6 @@ static inline struct ubifs_inode *ubifs_inode(const struct inode *inode)
 }
 
 /**
- * ubifs_ro_mode - switch UBIFS to read read-only mode.
- * @c: UBIFS file-system description object
- * @err: error code which is the reason of switching to R/O mode
- */
-static inline void ubifs_ro_mode(struct ubifs_info *c, int err)
-{
-	if (!c->ro_media) {
-		c->ro_media = 1;
-		ubifs_warn("switched to read-only mode, error %d", err);
-		dbg_dump_stack();
-	}
-}
-
-/**
  * ubifs_compr_present - check if compressor was compiled in.
  * @compr_type: compressor type to check
  *
@@ -322,7 +308,7 @@ static inline long long ubifs_reported_space(const struct ubifs_info *c,
 {
 	int divisor, factor;
 
-	divisor = UBIFS_MAX_DATA_NODE_SZ + (c->max_idx_node_sz << 1);
+	divisor = UBIFS_MAX_DATA_NODE_SZ + (c->max_idx_node_sz * 3);
 	factor = UBIFS_MAX_DATA_NODE_SZ - UBIFS_DATA_NODE_SZ;
 	do_div(free, divisor);
 
diff --git a/fs/ubifs/orphan.c b/fs/ubifs/orphan.c
index 3afeb9242c6a..02d3462f4d3e 100644
--- a/fs/ubifs/orphan.c
+++ b/fs/ubifs/orphan.c
@@ -310,10 +310,10 @@ static int write_orph_node(struct ubifs_info *c, int atomic)
 	c->cmt_orphans -= cnt;
 	spin_unlock(&c->orphan_lock);
 	if (c->cmt_orphans)
-		orph->cmt_no = cpu_to_le64(c->cmt_no + 1);
+		orph->cmt_no = cpu_to_le64(c->cmt_no);
 	else
 		/* Mark the last node of the commit */
-		orph->cmt_no = cpu_to_le64((c->cmt_no + 1) | (1ULL << 63));
+		orph->cmt_no = cpu_to_le64((c->cmt_no) | (1ULL << 63));
 	ubifs_assert(c->ohead_offs + len <= c->leb_size);
 	ubifs_assert(c->ohead_lnum >= c->orph_first);
 	ubifs_assert(c->ohead_lnum <= c->orph_last);
diff --git a/fs/ubifs/super.c b/fs/ubifs/super.c
index 00eb9c68ad03..f71e6b8822c4 100644
--- a/fs/ubifs/super.c
+++ b/fs/ubifs/super.c
@@ -30,7 +30,6 @@
 #include <linux/slab.h>
 #include <linux/module.h>
 #include <linux/ctype.h>
-#include <linux/random.h>
 #include <linux/kthread.h>
 #include <linux/parser.h>
 #include <linux/seq_file.h>
@@ -149,7 +148,7 @@ struct inode *ubifs_iget(struct super_block *sb, unsigned long inum)
 	if (err)
 		goto out_invalid;
 
-	/* Disable readahead */
+	/* Disable read-ahead */
 	inode->i_mapping->backing_dev_info = &c->bdi;
 
 	switch (inode->i_mode & S_IFMT) {
@@ -278,7 +277,7 @@ static void ubifs_destroy_inode(struct inode *inode)
  */
 static int ubifs_write_inode(struct inode *inode, int wait)
 {
-	int err;
+	int err = 0;
 	struct ubifs_info *c = inode->i_sb->s_fs_info;
 	struct ubifs_inode *ui = ubifs_inode(inode);
 
@@ -299,10 +298,18 @@ static int ubifs_write_inode(struct inode *inode, int wait)
 		return 0;
 	}
 
-	dbg_gen("inode %lu", inode->i_ino);
-	err = ubifs_jnl_write_inode(c, inode, 0);
-	if (err)
-		ubifs_err("can't write inode %lu, error %d", inode->i_ino, err);
+	/*
+	 * As an optimization, do not write orphan inodes to the media just
+	 * because this is not needed.
+	 */
+	dbg_gen("inode %lu, mode %#x, nlink %u",
+		inode->i_ino, (int)inode->i_mode, inode->i_nlink);
+	if (inode->i_nlink) {
+		err = ubifs_jnl_write_inode(c, inode);
+		if (err)
+			ubifs_err("can't write inode %lu, error %d",
+				  inode->i_ino, err);
+	}
 
 	ui->dirty = 0;
 	mutex_unlock(&ui->ui_mutex);
@@ -314,8 +321,9 @@ static void ubifs_delete_inode(struct inode *inode)
 {
 	int err;
 	struct ubifs_info *c = inode->i_sb->s_fs_info;
+	struct ubifs_inode *ui = ubifs_inode(inode);
 
-	if (ubifs_inode(inode)->xattr)
+	if (ui->xattr)
 		/*
 		 * Extended attribute inode deletions are fully handled in
 		 * 'ubifs_removexattr()'. These inodes are special and have
@@ -323,7 +331,7 @@ static void ubifs_delete_inode(struct inode *inode)
 		 */
 		goto out;
 
-	dbg_gen("inode %lu", inode->i_ino);
+	dbg_gen("inode %lu, mode %#x", inode->i_ino, (int)inode->i_mode);
 	ubifs_assert(!atomic_read(&inode->i_count));
 	ubifs_assert(inode->i_nlink == 0);
 
@@ -331,15 +339,19 @@ static void ubifs_delete_inode(struct inode *inode)
 	if (is_bad_inode(inode))
 		goto out;
 
-	ubifs_inode(inode)->ui_size = inode->i_size = 0;
-	err = ubifs_jnl_write_inode(c, inode, 1);
+	ui->ui_size = inode->i_size = 0;
+	err = ubifs_jnl_delete_inode(c, inode);
 	if (err)
 		/*
 		 * Worst case we have a lost orphan inode wasting space, so a
-		 * simple error message is ok here.
+		 * simple error message is OK here.
 		 */
-		ubifs_err("can't write inode %lu, error %d", inode->i_ino, err);
+		ubifs_err("can't delete inode %lu, error %d",
+			  inode->i_ino, err);
+
 out:
+	if (ui->dirty)
+		ubifs_release_dirty_inode_budget(c, ui);
 	clear_inode(inode);
 }
 
@@ -1122,8 +1134,8 @@ static int mount_ubifs(struct ubifs_info *c)
 	if (err)
 		goto out_infos;
 
-	ubifs_msg("mounted UBI device %d, volume %d", c->vi.ubi_num,
-		  c->vi.vol_id);
+	ubifs_msg("mounted UBI device %d, volume %d, name \"%s\"",
+		  c->vi.ubi_num, c->vi.vol_id, c->vi.name);
 	if (mounted_read_only)
 		ubifs_msg("mounted read-only");
 	x = (long long)c->main_lebs * c->leb_size;
@@ -1469,6 +1481,7 @@ static void ubifs_put_super(struct super_block *sb)
 	 */
 	ubifs_assert(atomic_long_read(&c->dirty_pg_cnt) == 0);
 	ubifs_assert(c->budg_idx_growth == 0);
+	ubifs_assert(c->budg_dd_growth == 0);
 	ubifs_assert(c->budg_data_growth == 0);
 
 	/*
@@ -1657,7 +1670,6 @@ static int ubifs_fill_super(struct super_block *sb, void *data, int silent)
 	INIT_LIST_HEAD(&c->orph_new);
 
 	c->highest_inum = UBIFS_FIRST_INO;
-	get_random_bytes(&c->vfs_gen, sizeof(int));
 	c->lhead_lnum = c->ltail_lnum = UBIFS_LOG_LNUM;
 
 	ubi_get_volume_info(ubi, &c->vi);
@@ -1671,10 +1683,10 @@ static int ubifs_fill_super(struct super_block *sb, void *data, int silent)
 	}
 
 	/*
-	 * UBIFS provids 'backing_dev_info' in order to disable readahead. For
+	 * UBIFS provides 'backing_dev_info' in order to disable read-ahead. For
 	 * UBIFS, I/O is not deferred, it is done immediately in readpage,
 	 * which means the user would have to wait not just for their own I/O
-	 * but the readahead I/O as well i.e. completely pointless.
+	 * but the read-ahead I/O as well i.e. completely pointless.
 	 *
 	 * Read-ahead will be disabled because @c->bdi.ra_pages is 0.
 	 */
@@ -1841,7 +1853,7 @@ static struct file_system_type ubifs_fs_type = {
 /*
  * Inode slab cache constructor.
  */
-static void inode_slab_ctor(struct kmem_cache *cachep, void *obj)
+static void inode_slab_ctor(void *obj)
 {
 	struct ubifs_inode *ui = obj;
 	inode_init_once(&ui->vfs_inode);
diff --git a/fs/ubifs/tnc_commit.c b/fs/ubifs/tnc_commit.c
index 8117e65ba2e9..8ac76b1c2d55 100644
--- a/fs/ubifs/tnc_commit.c
+++ b/fs/ubifs/tnc_commit.c
@@ -372,26 +372,25 @@ static int layout_in_gaps(struct ubifs_info *c, int cnt)
 		written = layout_leb_in_gaps(c, p);
 		if (written < 0) {
 			err = written;
-			if (err == -ENOSPC) {
-				if (!dbg_force_in_the_gaps_enabled) {
-					/*
-					 * Do not print scary warnings if the
-					 * debugging option which forces
-					 * in-the-gaps is enabled.
-					 */
-					ubifs_err("out of space");
-					spin_lock(&c->space_lock);
-					dbg_dump_budg(c);
-					spin_unlock(&c->space_lock);
-					dbg_dump_lprops(c);
-				}
-				/* Try to commit anyway */
-				err = 0;
-				break;
+			if (err != -ENOSPC) {
+				kfree(c->gap_lebs);
+				c->gap_lebs = NULL;
+				return err;
 			}
-			kfree(c->gap_lebs);
-			c->gap_lebs = NULL;
-			return err;
+			if (!dbg_force_in_the_gaps_enabled) {
+				/*
+				 * Do not print scary warnings if the debugging
+				 * option which forces in-the-gaps is enabled.
+				 */
+				ubifs_err("out of space");
+				spin_lock(&c->space_lock);
+				dbg_dump_budg(c);
+				spin_unlock(&c->space_lock);
+				dbg_dump_lprops(c);
+			}
+			/* Try to commit anyway */
+			err = 0;
+			break;
 		}
 		p++;
 		cnt -= written;
diff --git a/fs/ubifs/ubifs-media.h b/fs/ubifs/ubifs-media.h
index 0cc7da9bed47..bd2121f3426e 100644
--- a/fs/ubifs/ubifs-media.h
+++ b/fs/ubifs/ubifs-media.h
@@ -228,10 +228,10 @@ enum {
 /* Minimum number of orphan area logical eraseblocks */
 #define UBIFS_MIN_ORPH_LEBS 1
 /*
- * Minimum number of main area logical eraseblocks (buds, 2 for the index, 1
+ * Minimum number of main area logical eraseblocks (buds, 3 for the index, 1
  * for GC, 1 for deletions, and at least 1 for committed data).
  */
-#define UBIFS_MIN_MAIN_LEBS (UBIFS_MIN_BUD_LEBS + 5)
+#define UBIFS_MIN_MAIN_LEBS (UBIFS_MIN_BUD_LEBS + 6)
 
 /* Minimum number of logical eraseblocks */
 #define UBIFS_MIN_LEB_CNT (UBIFS_SB_LEBS + UBIFS_MST_LEBS + \
diff --git a/fs/ubifs/ubifs.h b/fs/ubifs/ubifs.h
index e4f89f271827..d7f706f7a302 100644
--- a/fs/ubifs/ubifs.h
+++ b/fs/ubifs/ubifs.h
@@ -20,8 +20,6 @@
  *          Adrian Hunter
  */
 
-/* Implementation version 0.7 */
-
 #ifndef __UBIFS_H__
 #define __UBIFS_H__
 
@@ -322,6 +320,8 @@ struct ubifs_gced_idx_leb {
  * struct ubifs_inode - UBIFS in-memory inode description.
  * @vfs_inode: VFS inode description object
  * @creat_sqnum: sequence number at time of creation
+ * @del_cmtno: commit number corresponding to the time the inode was deleted,
+ *             protected by @c->commit_sem;
  * @xattr_size: summarized size of all extended attributes in bytes
  * @xattr_cnt: count of extended attributes this inode has
  * @xattr_names: sum of lengths of all extended attribute names belonging to
@@ -373,6 +373,7 @@ struct ubifs_gced_idx_leb {
 struct ubifs_inode {
 	struct inode vfs_inode;
 	unsigned long long creat_sqnum;
+	unsigned long long del_cmtno;
 	unsigned int xattr_size;
 	unsigned int xattr_cnt;
 	unsigned int xattr_names;
@@ -779,7 +780,7 @@ struct ubifs_compressor {
 /**
  * struct ubifs_budget_req - budget requirements of an operation.
  *
- * @fast: non-zero if the budgeting should try to aquire budget quickly and
+ * @fast: non-zero if the budgeting should try to acquire budget quickly and
  *        should not try to call write-back
  * @recalculate: non-zero if @idx_growth, @data_growth, and @dd_growth fields
  *               have to be re-calculated
@@ -805,21 +806,31 @@ struct ubifs_compressor {
  * An inode may contain 4KiB of data at max., thus the widths of @new_ino_d
  * is 13 bits, and @dirtied_ino_d - 15, because up to 4 inodes may be made
  * dirty by the re-name operation.
+ *
+ * Note, UBIFS aligns node lengths to 8-bytes boundary, so the requester has to
+ * make sure the amount of inode data which contribute to @new_ino_d and
+ * @dirtied_ino_d fields are aligned.
  */
 struct ubifs_budget_req {
 	unsigned int fast:1;
 	unsigned int recalculate:1;
+#ifndef UBIFS_DEBUG
 	unsigned int new_page:1;
 	unsigned int dirtied_page:1;
 	unsigned int new_dent:1;
 	unsigned int mod_dent:1;
 	unsigned int new_ino:1;
 	unsigned int new_ino_d:13;
-#ifndef UBIFS_DEBUG
 	unsigned int dirtied_ino:4;
 	unsigned int dirtied_ino_d:15;
 #else
 	/* Not bit-fields to check for overflows */
+	unsigned int new_page;
+	unsigned int dirtied_page;
+	unsigned int new_dent;
+	unsigned int mod_dent;
+	unsigned int new_ino;
+	unsigned int new_ino_d;
 	unsigned int dirtied_ino;
 	unsigned int dirtied_ino_d;
 #endif
@@ -860,13 +871,13 @@ struct ubifs_mount_opts {
  * struct ubifs_info - UBIFS file-system description data structure
  * (per-superblock).
  * @vfs_sb: VFS @struct super_block object
- * @bdi: backing device info object to make VFS happy and disable readahead
+ * @bdi: backing device info object to make VFS happy and disable read-ahead
  *
  * @highest_inum: highest used inode number
- * @vfs_gen: VFS inode generation counter
  * @max_sqnum: current global sequence number
- * @cmt_no: commit number (last successfully completed commit)
- * @cnt_lock: protects @highest_inum, @vfs_gen, and @max_sqnum counters
+ * @cmt_no: commit number of the last successfully completed commit, protected
+ *          by @commit_sem
+ * @cnt_lock: protects @highest_inum and @max_sqnum counters
  * @fmt_version: UBIFS on-flash format version
  * @uuid: UUID from super block
  *
@@ -1103,7 +1114,6 @@ struct ubifs_info {
 	struct backing_dev_info bdi;
 
 	ino_t highest_inum;
-	unsigned int vfs_gen;
 	unsigned long long max_sqnum;
 	unsigned long long cmt_no;
 	spinlock_t cnt_lock;
@@ -1346,6 +1356,7 @@ extern struct backing_dev_info ubifs_backing_dev_info;
 extern struct ubifs_compressor *ubifs_compressors[UBIFS_COMPR_TYPES_CNT];
 
 /* io.c */
+void ubifs_ro_mode(struct ubifs_info *c, int err);
 int ubifs_wbuf_write_nolock(struct ubifs_wbuf *wbuf, void *buf, int len);
 int ubifs_wbuf_seek_nolock(struct ubifs_wbuf *wbuf, int lnum, int offs,
 			   int dtype);
@@ -1399,8 +1410,8 @@ int ubifs_jnl_update(struct ubifs_info *c, const struct inode *dir,
 		     int deletion, int xent);
 int ubifs_jnl_write_data(struct ubifs_info *c, const struct inode *inode,
 			 const union ubifs_key *key, const void *buf, int len);
-int ubifs_jnl_write_inode(struct ubifs_info *c, const struct inode *inode,
-			  int last_reference);
+int ubifs_jnl_write_inode(struct ubifs_info *c, const struct inode *inode);
+int ubifs_jnl_delete_inode(struct ubifs_info *c, const struct inode *inode);
 int ubifs_jnl_rename(struct ubifs_info *c, const struct inode *old_dir,
 		     const struct dentry *old_dentry,
 		     const struct inode *new_dir,
diff --git a/fs/ubifs/xattr.c b/fs/ubifs/xattr.c
index 1388a078e1a9..649bec78b645 100644
--- a/fs/ubifs/xattr.c
+++ b/fs/ubifs/xattr.c
@@ -61,7 +61,7 @@
 
 /*
  * Limit the number of extended attributes per inode so that the total size
- * (xattr_size) is guaranteeded to fit in an 'unsigned int'.
+ * (@xattr_size) is guaranteeded to fit in an 'unsigned int'.
  */
 #define MAX_XATTRS_PER_INODE 65535
 
@@ -103,14 +103,14 @@ static int create_xattr(struct ubifs_info *c, struct inode *host,
 	struct inode *inode;
 	struct ubifs_inode *ui, *host_ui = ubifs_inode(host);
 	struct ubifs_budget_req req = { .new_ino = 1, .new_dent = 1,
-					.new_ino_d = size, .dirtied_ino = 1,
-					.dirtied_ino_d = host_ui->data_len};
+				.new_ino_d = ALIGN(size, 8), .dirtied_ino = 1,
+				.dirtied_ino_d = ALIGN(host_ui->data_len, 8) };
 
 	if (host_ui->xattr_cnt >= MAX_XATTRS_PER_INODE)
 		return -ENOSPC;
 	/*
 	 * Linux limits the maximum size of the extended attribute names list
-	 * to %XATTR_LIST_MAX. This means we should not allow creating more*
+	 * to %XATTR_LIST_MAX. This means we should not allow creating more
 	 * extended attributes if the name list becomes larger. This limitation
 	 * is artificial for UBIFS, though.
 	 */
@@ -128,7 +128,6 @@ static int create_xattr(struct ubifs_info *c, struct inode *host,
 		goto out_budg;
 	}
 
-	mutex_lock(&host_ui->ui_mutex);
 	/* Re-define all operations to be "nothing" */
 	inode->i_mapping->a_ops = &none_address_operations;
 	inode->i_op = &none_inode_operations;
@@ -141,23 +140,19 @@ static int create_xattr(struct ubifs_info *c, struct inode *host,
 	ui->data = kmalloc(size, GFP_NOFS);
 	if (!ui->data) {
 		err = -ENOMEM;
-		goto out_unlock;
+		goto out_free;
 	}
-
 	memcpy(ui->data, value, size);
+	inode->i_size = ui->ui_size = size;
+	ui->data_len = size;
+
+	mutex_lock(&host_ui->ui_mutex);
 	host->i_ctime = ubifs_current_time(host);
 	host_ui->xattr_cnt += 1;
 	host_ui->xattr_size += CALC_DENT_SIZE(nm->len);
 	host_ui->xattr_size += CALC_XATTR_BYTES(size);
 	host_ui->xattr_names += nm->len;
 
-	/*
-	 * We do not use i_size_write() because nobody can race with us as we
-	 * are holding host @host->i_mutex - every xattr operation for this
-	 * inode is serialized by it.
-	 */
-	inode->i_size = ui->ui_size = size;
-	ui->data_len = size;
 	err = ubifs_jnl_update(c, host, nm, inode, 0, 1);
 	if (err)
 		goto out_cancel;
@@ -172,8 +167,8 @@ out_cancel:
 	host_ui->xattr_cnt -= 1;
 	host_ui->xattr_size -= CALC_DENT_SIZE(nm->len);
 	host_ui->xattr_size -= CALC_XATTR_BYTES(size);
-out_unlock:
 	mutex_unlock(&host_ui->ui_mutex);
+out_free:
 	make_bad_inode(inode);
 	iput(inode);
 out_budg:
@@ -200,29 +195,28 @@ static int change_xattr(struct ubifs_info *c, struct inode *host,
 	struct ubifs_inode *host_ui = ubifs_inode(host);
 	struct ubifs_inode *ui = ubifs_inode(inode);
 	struct ubifs_budget_req req = { .dirtied_ino = 2,
-				.dirtied_ino_d = size + host_ui->data_len };
+		.dirtied_ino_d = ALIGN(size, 8) + ALIGN(host_ui->data_len, 8) };
 
 	ubifs_assert(ui->data_len == inode->i_size);
 	err = ubifs_budget_space(c, &req);
 	if (err)
 		return err;
 
-	mutex_lock(&host_ui->ui_mutex);
-	host->i_ctime = ubifs_current_time(host);
-	host_ui->xattr_size -= CALC_XATTR_BYTES(ui->data_len);
-	host_ui->xattr_size += CALC_XATTR_BYTES(size);
-
 	kfree(ui->data);
 	ui->data = kmalloc(size, GFP_NOFS);
 	if (!ui->data) {
 		err = -ENOMEM;
-		goto out_unlock;
+		goto out_free;
 	}
-
 	memcpy(ui->data, value, size);
 	inode->i_size = ui->ui_size = size;
 	ui->data_len = size;
 
+	mutex_lock(&host_ui->ui_mutex);
+	host->i_ctime = ubifs_current_time(host);
+	host_ui->xattr_size -= CALC_XATTR_BYTES(ui->data_len);
+	host_ui->xattr_size += CALC_XATTR_BYTES(size);
+
 	/*
 	 * It is important to write the host inode after the xattr inode
 	 * because if the host inode gets synchronized (via 'fsync()'), then
@@ -240,9 +234,9 @@ static int change_xattr(struct ubifs_info *c, struct inode *host,
 out_cancel:
 	host_ui->xattr_size -= CALC_XATTR_BYTES(size);
 	host_ui->xattr_size += CALC_XATTR_BYTES(ui->data_len);
-	make_bad_inode(inode);
-out_unlock:
 	mutex_unlock(&host_ui->ui_mutex);
+	make_bad_inode(inode);
+out_free:
 	ubifs_release_budget(c, &req);
 	return err;
 }
@@ -312,6 +306,7 @@ int ubifs_setxattr(struct dentry *dentry, const char *name,
 
 	dbg_gen("xattr '%s', host ino %lu ('%.*s'), size %zd", name,
 		host->i_ino, dentry->d_name.len, dentry->d_name.name, size);
+	ubifs_assert(mutex_is_locked(&host->i_mutex));
 
 	if (size > UBIFS_MAX_INO_DATA)
 		return -ERANGE;
@@ -384,7 +379,6 @@ ssize_t ubifs_getxattr(struct dentry *dentry, const char *name, void *buf,
 	if (!xent)
 		return -ENOMEM;
 
-	mutex_lock(&host->i_mutex);
 	xent_key_init(c, &key, host->i_ino, &nm);
 	err = ubifs_tnc_lookup_nm(c, &key, xent, &nm);
 	if (err) {
@@ -419,7 +413,6 @@ ssize_t ubifs_getxattr(struct dentry *dentry, const char *name, void *buf,
 out_iput:
 	iput(inode);
 out_unlock:
-	mutex_unlock(&host->i_mutex);
 	kfree(xent);
 	return err;
 }
@@ -449,8 +442,6 @@ ssize_t ubifs_listxattr(struct dentry *dentry, char *buffer, size_t size)
 		return -ERANGE;
 
 	lowest_xent_key(c, &key, host->i_ino);
-
-	mutex_lock(&host->i_mutex);
 	while (1) {
 		int type;
 
@@ -479,7 +470,6 @@ ssize_t ubifs_listxattr(struct dentry *dentry, char *buffer, size_t size)
 		pxent = xent;
 		key_read(c, &xent->key, &key);
 	}
-	mutex_unlock(&host->i_mutex);
 
 	kfree(pxent);
 	if (err != -ENOENT) {
@@ -497,8 +487,8 @@ static int remove_xattr(struct ubifs_info *c, struct inode *host,
 	int err;
 	struct ubifs_inode *host_ui = ubifs_inode(host);
 	struct ubifs_inode *ui = ubifs_inode(inode);
-	struct ubifs_budget_req req = { .dirtied_ino = 1, .mod_dent = 1,
-					.dirtied_ino_d = host_ui->data_len };
+	struct ubifs_budget_req req = { .dirtied_ino = 2, .mod_dent = 1,
+				.dirtied_ino_d = ALIGN(host_ui->data_len, 8) };
 
 	ubifs_assert(ui->data_len == inode->i_size);
 
diff --git a/fs/udf/super.c b/fs/udf/super.c
index 44cc702f96cc..5698bbf83bbf 100644
--- a/fs/udf/super.c
+++ b/fs/udf/super.c
@@ -148,7 +148,7 @@ static void udf_destroy_inode(struct inode *inode)
 	kmem_cache_free(udf_inode_cachep, UDF_I(inode));
 }
 
-static void init_once(struct kmem_cache *cachep, void *foo)
+static void init_once(void *foo)
 {
 	struct udf_inode_info *ei = (struct udf_inode_info *)foo;
 
diff --git a/fs/ufs/super.c b/fs/ufs/super.c
index 506f724055c2..3141969b456d 100644
--- a/fs/ufs/super.c
+++ b/fs/ufs/super.c
@@ -76,6 +76,7 @@
 
 #include <linux/errno.h>
 #include <linux/fs.h>
+#include <linux/quotaops.h>
 #include <linux/slab.h>
 #include <linux/time.h>
 #include <linux/stat.h>
@@ -1232,7 +1233,7 @@ static int ufs_show_options(struct seq_file *seq, struct vfsmount *vfs)
 {
 	struct ufs_sb_info *sbi = UFS_SB(vfs->mnt_sb);
 	unsigned mval = sbi->s_mount_opt & UFS_MOUNT_UFSTYPE;
-	const struct match_token *tp = tokens;
+	struct match_token *tp = tokens;
 
 	while (tp->token != Opt_onerror_panic && tp->token != mval)
 		++tp;
@@ -1301,7 +1302,7 @@ static void ufs_destroy_inode(struct inode *inode)
 	kmem_cache_free(ufs_inode_cachep, UFS_I(inode));
 }
 
-static void init_once(struct kmem_cache * cachep, void *foo)
+static void init_once(void *foo)
 {
 	struct ufs_inode_info *ei = (struct ufs_inode_info *) foo;
 
diff --git a/fs/utimes.c b/fs/utimes.c
index b6b664e7145e..6929e3e91d05 100644
--- a/fs/utimes.c
+++ b/fs/utimes.c
@@ -48,66 +48,22 @@ static bool nsec_valid(long nsec)
 	return nsec >= 0 && nsec <= 999999999;
 }
 
-/* If times==NULL, set access and modification to current time,
- * must be owner or have write permission.
- * Else, update from *times, must be owner or super user.
- */
-long do_utimes(int dfd, char __user *filename, struct timespec *times, int flags)
+static int utimes_common(struct path *path, struct timespec *times)
 {
 	int error;
-	struct nameidata nd;
-	struct dentry *dentry;
-	struct inode *inode;
 	struct iattr newattrs;
-	struct file *f = NULL;
-	struct vfsmount *mnt;
-
-	error = -EINVAL;
-	if (times && (!nsec_valid(times[0].tv_nsec) ||
-		      !nsec_valid(times[1].tv_nsec))) {
-		goto out;
-	}
-
-	if (flags & ~AT_SYMLINK_NOFOLLOW)
-		goto out;
-
-	if (filename == NULL && dfd != AT_FDCWD) {
-		error = -EINVAL;
-		if (flags & AT_SYMLINK_NOFOLLOW)
-			goto out;
+	struct inode *inode = path->dentry->d_inode;
 
-		error = -EBADF;
-		f = fget(dfd);
-		if (!f)
-			goto out;
-		dentry = f->f_path.dentry;
-		mnt = f->f_path.mnt;
-	} else {
-		error = __user_walk_fd(dfd, filename, (flags & AT_SYMLINK_NOFOLLOW) ? 0 : LOOKUP_FOLLOW, &nd);
-		if (error)
-			goto out;
-
-		dentry = nd.path.dentry;
-		mnt = nd.path.mnt;
-	}
-
-	inode = dentry->d_inode;
-
-	error = mnt_want_write(mnt);
+	error = mnt_want_write(path->mnt);
 	if (error)
-		goto dput_and_out;
+		goto out;
 
 	if (times && times[0].tv_nsec == UTIME_NOW &&
 		     times[1].tv_nsec == UTIME_NOW)
 		times = NULL;
 
-	/* In most cases, the checks are done in inode_change_ok() */
 	newattrs.ia_valid = ATTR_CTIME | ATTR_MTIME | ATTR_ATIME;
 	if (times) {
-		error = -EPERM;
-                if (IS_APPEND(inode) || IS_IMMUTABLE(inode))
-			goto mnt_drop_write_and_out;
-
 		if (times[0].tv_nsec == UTIME_OMIT)
 			newattrs.ia_valid &= ~ATTR_ATIME;
 		else if (times[0].tv_nsec != UTIME_NOW) {
@@ -123,21 +79,13 @@ long do_utimes(int dfd, char __user *filename, struct timespec *times, int flags
 			newattrs.ia_mtime.tv_nsec = times[1].tv_nsec;
 			newattrs.ia_valid |= ATTR_MTIME_SET;
 		}
-
 		/*
-		 * For the UTIME_OMIT/UTIME_NOW and UTIME_NOW/UTIME_OMIT
-		 * cases, we need to make an extra check that is not done by
-		 * inode_change_ok().
+		 * Tell inode_change_ok(), that this is an explicit time
+		 * update, even if neither ATTR_ATIME_SET nor ATTR_MTIME_SET
+		 * were used.
 		 */
-		if (((times[0].tv_nsec == UTIME_NOW &&
-			    times[1].tv_nsec == UTIME_OMIT)
-		     ||
-		     (times[0].tv_nsec == UTIME_OMIT &&
-			    times[1].tv_nsec == UTIME_NOW))
-		    && !is_owner_or_cap(inode))
-			goto mnt_drop_write_and_out;
+		newattrs.ia_valid |= ATTR_TIMES_SET;
 	} else {
-
 		/*
 		 * If times is NULL (or both times are UTIME_NOW),
 		 * then we need to check permissions, because
@@ -148,21 +96,76 @@ long do_utimes(int dfd, char __user *filename, struct timespec *times, int flags
 			goto mnt_drop_write_and_out;
 
 		if (!is_owner_or_cap(inode)) {
-			error = permission(inode, MAY_WRITE, NULL);
+			error = inode_permission(inode, MAY_WRITE);
 			if (error)
 				goto mnt_drop_write_and_out;
 		}
 	}
 	mutex_lock(&inode->i_mutex);
-	error = notify_change(dentry, &newattrs);
+	error = notify_change(path->dentry, &newattrs);
 	mutex_unlock(&inode->i_mutex);
+
 mnt_drop_write_and_out:
-	mnt_drop_write(mnt);
-dput_and_out:
-	if (f)
-		fput(f);
-	else
-		path_put(&nd.path);
+	mnt_drop_write(path->mnt);
+out:
+	return error;
+}
+
+/*
+ * do_utimes - change times on filename or file descriptor
+ * @dfd: open file descriptor, -1 or AT_FDCWD
+ * @filename: path name or NULL
+ * @times: new times or NULL
+ * @flags: zero or more flags (only AT_SYMLINK_NOFOLLOW for the moment)
+ *
+ * If filename is NULL and dfd refers to an open file, then operate on
+ * the file.  Otherwise look up filename, possibly using dfd as a
+ * starting point.
+ *
+ * If times==NULL, set access and modification to current time,
+ * must be owner or have write permission.
+ * Else, update from *times, must be owner or super user.
+ */
+long do_utimes(int dfd, char __user *filename, struct timespec *times, int flags)
+{
+	int error = -EINVAL;
+
+	if (times && (!nsec_valid(times[0].tv_nsec) ||
+		      !nsec_valid(times[1].tv_nsec))) {
+		goto out;
+	}
+
+	if (flags & ~AT_SYMLINK_NOFOLLOW)
+		goto out;
+
+	if (filename == NULL && dfd != AT_FDCWD) {
+		struct file *file;
+
+		if (flags & AT_SYMLINK_NOFOLLOW)
+			goto out;
+
+		file = fget(dfd);
+		error = -EBADF;
+		if (!file)
+			goto out;
+
+		error = utimes_common(&file->f_path, times);
+		fput(file);
+	} else {
+		struct path path;
+		int lookup_flags = 0;
+
+		if (!(flags & AT_SYMLINK_NOFOLLOW))
+			lookup_flags |= LOOKUP_FOLLOW;
+
+		error = user_path_at(dfd, filename, lookup_flags, &path);
+		if (error)
+			goto out;
+
+		error = utimes_common(&path, times);
+		path_put(&path);
+	}
+
 out:
 	return error;
 }
diff --git a/fs/vfat/namei.c b/fs/vfat/namei.c
index b546ba69be82..155c10b4adbd 100644
--- a/fs/vfat/namei.c
+++ b/fs/vfat/namei.c
@@ -621,7 +621,7 @@ shortname:
 	memcpy(de->name, msdos_name, MSDOS_NAME);
 	de->attr = is_dir ? ATTR_DIR : ATTR_ARCH;
 	de->lcase = lcase;
-	fat_date_unix2dos(ts->tv_sec, &time, &date);
+	fat_date_unix2dos(ts->tv_sec, &time, &date, sbi->options.tz_utc);
 	de->time = de->ctime = time;
 	de->date = de->cdate = de->adate = date;
 	de->ctime_cs = 0;
diff --git a/fs/xattr.c b/fs/xattr.c
index 4706a8b1f495..468377e66531 100644
--- a/fs/xattr.c
+++ b/fs/xattr.c
@@ -63,7 +63,7 @@ xattr_permission(struct inode *inode, const char *name, int mask)
 			return -EPERM;
 	}
 
-	return permission(inode, mask, NULL);
+	return inode_permission(inode, mask);
 }
 
 int
@@ -252,40 +252,40 @@ setxattr(struct dentry *d, const char __user *name, const void __user *value,
 }
 
 asmlinkage long
-sys_setxattr(const char __user *path, const char __user *name,
+sys_setxattr(const char __user *pathname, const char __user *name,
 	     const void __user *value, size_t size, int flags)
 {
-	struct nameidata nd;
+	struct path path;
 	int error;
 
-	error = user_path_walk(path, &nd);
+	error = user_path(pathname, &path);
 	if (error)
 		return error;
-	error = mnt_want_write(nd.path.mnt);
+	error = mnt_want_write(path.mnt);
 	if (!error) {
-		error = setxattr(nd.path.dentry, name, value, size, flags);
-		mnt_drop_write(nd.path.mnt);
+		error = setxattr(path.dentry, name, value, size, flags);
+		mnt_drop_write(path.mnt);
 	}
-	path_put(&nd.path);
+	path_put(&path);
 	return error;
 }
 
 asmlinkage long
-sys_lsetxattr(const char __user *path, const char __user *name,
+sys_lsetxattr(const char __user *pathname, const char __user *name,
 	      const void __user *value, size_t size, int flags)
 {
-	struct nameidata nd;
+	struct path path;
 	int error;
 
-	error = user_path_walk_link(path, &nd);
+	error = user_lpath(pathname, &path);
 	if (error)
 		return error;
-	error = mnt_want_write(nd.path.mnt);
+	error = mnt_want_write(path.mnt);
 	if (!error) {
-		error = setxattr(nd.path.dentry, name, value, size, flags);
-		mnt_drop_write(nd.path.mnt);
+		error = setxattr(path.dentry, name, value, size, flags);
+		mnt_drop_write(path.mnt);
 	}
-	path_put(&nd.path);
+	path_put(&path);
 	return error;
 }
 
@@ -350,32 +350,32 @@ getxattr(struct dentry *d, const char __user *name, void __user *value,
 }
 
 asmlinkage ssize_t
-sys_getxattr(const char __user *path, const char __user *name,
+sys_getxattr(const char __user *pathname, const char __user *name,
 	     void __user *value, size_t size)
 {
-	struct nameidata nd;
+	struct path path;
 	ssize_t error;
 
-	error = user_path_walk(path, &nd);
+	error = user_path(pathname, &path);
 	if (error)
 		return error;
-	error = getxattr(nd.path.dentry, name, value, size);
-	path_put(&nd.path);
+	error = getxattr(path.dentry, name, value, size);
+	path_put(&path);
 	return error;
 }
 
 asmlinkage ssize_t
-sys_lgetxattr(const char __user *path, const char __user *name, void __user *value,
+sys_lgetxattr(const char __user *pathname, const char __user *name, void __user *value,
 	      size_t size)
 {
-	struct nameidata nd;
+	struct path path;
 	ssize_t error;
 
-	error = user_path_walk_link(path, &nd);
+	error = user_lpath(pathname, &path);
 	if (error)
 		return error;
-	error = getxattr(nd.path.dentry, name, value, size);
-	path_put(&nd.path);
+	error = getxattr(path.dentry, name, value, size);
+	path_put(&path);
 	return error;
 }
 
@@ -425,30 +425,30 @@ listxattr(struct dentry *d, char __user *list, size_t size)
 }
 
 asmlinkage ssize_t
-sys_listxattr(const char __user *path, char __user *list, size_t size)
+sys_listxattr(const char __user *pathname, char __user *list, size_t size)
 {
-	struct nameidata nd;
+	struct path path;
 	ssize_t error;
 
-	error = user_path_walk(path, &nd);
+	error = user_path(pathname, &path);
 	if (error)
 		return error;
-	error = listxattr(nd.path.dentry, list, size);
-	path_put(&nd.path);
+	error = listxattr(path.dentry, list, size);
+	path_put(&path);
 	return error;
 }
 
 asmlinkage ssize_t
-sys_llistxattr(const char __user *path, char __user *list, size_t size)
+sys_llistxattr(const char __user *pathname, char __user *list, size_t size)
 {
-	struct nameidata nd;
+	struct path path;
 	ssize_t error;
 
-	error = user_path_walk_link(path, &nd);
+	error = user_lpath(pathname, &path);
 	if (error)
 		return error;
-	error = listxattr(nd.path.dentry, list, size);
-	path_put(&nd.path);
+	error = listxattr(path.dentry, list, size);
+	path_put(&path);
 	return error;
 }
 
@@ -486,38 +486,38 @@ removexattr(struct dentry *d, const char __user *name)
 }
 
 asmlinkage long
-sys_removexattr(const char __user *path, const char __user *name)
+sys_removexattr(const char __user *pathname, const char __user *name)
 {
-	struct nameidata nd;
+	struct path path;
 	int error;
 
-	error = user_path_walk(path, &nd);
+	error = user_path(pathname, &path);
 	if (error)
 		return error;
-	error = mnt_want_write(nd.path.mnt);
+	error = mnt_want_write(path.mnt);
 	if (!error) {
-		error = removexattr(nd.path.dentry, name);
-		mnt_drop_write(nd.path.mnt);
+		error = removexattr(path.dentry, name);
+		mnt_drop_write(path.mnt);
 	}
-	path_put(&nd.path);
+	path_put(&path);
 	return error;
 }
 
 asmlinkage long
-sys_lremovexattr(const char __user *path, const char __user *name)
+sys_lremovexattr(const char __user *pathname, const char __user *name)
 {
-	struct nameidata nd;
+	struct path path;
 	int error;
 
-	error = user_path_walk_link(path, &nd);
+	error = user_lpath(pathname, &path);
 	if (error)
 		return error;
-	error = mnt_want_write(nd.path.mnt);
+	error = mnt_want_write(path.mnt);
 	if (!error) {
-		error = removexattr(nd.path.dentry, name);
-		mnt_drop_write(nd.path.mnt);
+		error = removexattr(path.dentry, name);
+		mnt_drop_write(path.mnt);
 	}
-	path_put(&nd.path);
+	path_put(&path);
 	return error;
 }
 
diff --git a/fs/xfs/Makefile b/fs/xfs/Makefile
index 36ec614e699a..737c9a425361 100644
--- a/fs/xfs/Makefile
+++ b/fs/xfs/Makefile
@@ -106,7 +106,8 @@ xfs-y				+= $(addprefix $(XFS_LINUX)/, \
 				   xfs_iops.o \
 				   xfs_lrw.o \
 				   xfs_super.o \
-				   xfs_vnode.o)
+				   xfs_vnode.o \
+				   xfs_xattr.o)
 
 # Objects in support/
 xfs-y				+= $(addprefix support/, \
diff --git a/fs/xfs/linux-2.6/kmem.c b/fs/xfs/linux-2.6/kmem.c
index 9b1bb17a0501..1cd3b55ee3d2 100644
--- a/fs/xfs/linux-2.6/kmem.c
+++ b/fs/xfs/linux-2.6/kmem.c
@@ -90,7 +90,7 @@ kmem_zalloc_greedy(size_t *size, size_t minsize, size_t maxsize,
 }
 
 void
-kmem_free(void *ptr, size_t size)
+kmem_free(const void *ptr)
 {
 	if (!is_vmalloc_addr(ptr)) {
 		kfree(ptr);
@@ -100,7 +100,7 @@ kmem_free(void *ptr, size_t size)
 }
 
 void *
-kmem_realloc(void *ptr, size_t newsize, size_t oldsize,
+kmem_realloc(const void *ptr, size_t newsize, size_t oldsize,
 	     unsigned int __nocast flags)
 {
 	void	*new;
@@ -110,7 +110,7 @@ kmem_realloc(void *ptr, size_t newsize, size_t oldsize,
 		if (new)
 			memcpy(new, ptr,
 				((oldsize < newsize) ? oldsize : newsize));
-		kmem_free(ptr, oldsize);
+		kmem_free(ptr);
 	}
 	return new;
 }
diff --git a/fs/xfs/linux-2.6/kmem.h b/fs/xfs/linux-2.6/kmem.h
index 5e9564902976..af6843c7ee4b 100644
--- a/fs/xfs/linux-2.6/kmem.h
+++ b/fs/xfs/linux-2.6/kmem.h
@@ -57,8 +57,8 @@ kmem_flags_convert(unsigned int __nocast flags)
 extern void *kmem_alloc(size_t, unsigned int __nocast);
 extern void *kmem_zalloc(size_t, unsigned int __nocast);
 extern void *kmem_zalloc_greedy(size_t *, size_t, size_t, unsigned int __nocast);
-extern void *kmem_realloc(void *, size_t, size_t, unsigned int __nocast);
-extern void  kmem_free(void *, size_t);
+extern void *kmem_realloc(const void *, size_t, size_t, unsigned int __nocast);
+extern void  kmem_free(const void *);
 
 /*
  * Zone interfaces
@@ -79,7 +79,7 @@ kmem_zone_init(int size, char *zone_name)
 
 static inline kmem_zone_t *
 kmem_zone_init_flags(int size, char *zone_name, unsigned long flags,
-		     void (*construct)(kmem_zone_t *, void *))
+		     void (*construct)(void *))
 {
 	return kmem_cache_create(zone_name, size, 0, flags, construct);
 }
diff --git a/fs/xfs/linux-2.6/sema.h b/fs/xfs/linux-2.6/sema.h
deleted file mode 100644
index 3abe7e9ceb33..000000000000
--- a/fs/xfs/linux-2.6/sema.h
+++ /dev/null
@@ -1,52 +0,0 @@
-/*
- * Copyright (c) 2000-2002,2005 Silicon Graphics, Inc.
- * All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it would be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write the Free Software Foundation,
- * Inc.,  51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
- */
-#ifndef __XFS_SUPPORT_SEMA_H__
-#define __XFS_SUPPORT_SEMA_H__
-
-#include <linux/time.h>
-#include <linux/wait.h>
-#include <linux/semaphore.h>
-#include <asm/atomic.h>
-
-/*
- * sema_t structure just maps to struct semaphore in Linux kernel.
- */
-
-typedef struct semaphore sema_t;
-
-#define initnsema(sp, val, name)	sema_init(sp, val)
-#define psema(sp, b)			down(sp)
-#define vsema(sp)			up(sp)
-#define freesema(sema)			do { } while (0)
-
-static inline int issemalocked(sema_t *sp)
-{
-	return down_trylock(sp) || (up(sp), 0);
-}
-
-/*
- * Map cpsema (try to get the sema) to down_trylock. We need to switch
- * the return values since cpsema returns 1 (acquired) 0 (failed) and
- * down_trylock returns the reverse 0 (acquired) 1 (failed).
- */
-static inline int cpsema(sema_t *sp)
-{
-	return down_trylock(sp) ? 0 : 1;
-}
-
-#endif /* __XFS_SUPPORT_SEMA_H__ */
diff --git a/fs/xfs/linux-2.6/xfs_aops.c b/fs/xfs/linux-2.6/xfs_aops.c
index a55c3b26d840..f42f80a3b1fa 100644
--- a/fs/xfs/linux-2.6/xfs_aops.c
+++ b/fs/xfs/linux-2.6/xfs_aops.c
@@ -73,7 +73,6 @@ xfs_page_trace(
 	unsigned long	pgoff)
 {
 	xfs_inode_t	*ip;
-	bhv_vnode_t	*vp = vn_from_inode(inode);
 	loff_t		isize = i_size_read(inode);
 	loff_t		offset = page_offset(page);
 	int		delalloc = -1, unmapped = -1, unwritten = -1;
@@ -81,7 +80,7 @@ xfs_page_trace(
 	if (page_has_buffers(page))
 		xfs_count_page_state(page, &delalloc, &unmapped, &unwritten);
 
-	ip = xfs_vtoi(vp);
+	ip = XFS_I(inode);
 	if (!ip->i_rwtrace)
 		return;
 
@@ -409,7 +408,6 @@ xfs_start_buffer_writeback(
 STATIC void
 xfs_start_page_writeback(
 	struct page		*page,
-	struct writeback_control *wbc,
 	int			clear_dirty,
 	int			buffers)
 {
@@ -676,7 +674,7 @@ xfs_probe_cluster(
 			} else
 				pg_offset = PAGE_CACHE_SIZE;
 
-			if (page->index == tindex && !TestSetPageLocked(page)) {
+			if (page->index == tindex && trylock_page(page)) {
 				pg_len = xfs_probe_page(page, pg_offset, mapped);
 				unlock_page(page);
 			}
@@ -760,7 +758,7 @@ xfs_convert_page(
 
 	if (page->index != tindex)
 		goto fail;
-	if (TestSetPageLocked(page))
+	if (!trylock_page(page))
 		goto fail;
 	if (PageWriteback(page))
 		goto fail_unlock_page;
@@ -858,7 +856,7 @@ xfs_convert_page(
 				done = 1;
 			}
 		}
-		xfs_start_page_writeback(page, wbc, !page_dirty, count);
+		xfs_start_page_writeback(page, !page_dirty, count);
 	}
 
 	return done;
@@ -1105,7 +1103,7 @@ xfs_page_state_convert(
 			 * that we are writing into for the first time.
 			 */
 			type = IOMAP_NEW;
-			if (!test_and_set_bit(BH_Lock, &bh->b_state)) {
+			if (trylock_buffer(bh)) {
 				ASSERT(buffer_mapped(bh));
 				if (iomap_valid)
 					all_bh = 1;
@@ -1130,7 +1128,7 @@ xfs_page_state_convert(
 		SetPageUptodate(page);
 
 	if (startio)
-		xfs_start_page_writeback(page, wbc, 1, count);
+		xfs_start_page_writeback(page, 1, count);
 
 	if (ioend && iomap_valid) {
 		offset = (iomap.iomap_offset + iomap.iomap_bsize - 1) >>
diff --git a/fs/xfs/linux-2.6/xfs_buf.c b/fs/xfs/linux-2.6/xfs_buf.c
index 98e0e86093b4..986061ae1b9b 100644
--- a/fs/xfs/linux-2.6/xfs_buf.c
+++ b/fs/xfs/linux-2.6/xfs_buf.c
@@ -58,7 +58,7 @@ xfs_buf_trace(
 		bp, id,
 		(void *)(unsigned long)bp->b_flags,
 		(void *)(unsigned long)bp->b_hold.counter,
-		(void *)(unsigned long)bp->b_sema.count.counter,
+		(void *)(unsigned long)bp->b_sema.count,
 		(void *)current,
 		data, ra,
 		(void *)(unsigned long)((bp->b_file_offset>>32) & 0xffffffff),
@@ -253,7 +253,7 @@ _xfs_buf_initialize(
 
 	memset(bp, 0, sizeof(xfs_buf_t));
 	atomic_set(&bp->b_hold, 1);
-	init_MUTEX_LOCKED(&bp->b_iodonesema);
+	init_completion(&bp->b_iowait);
 	INIT_LIST_HEAD(&bp->b_list);
 	INIT_LIST_HEAD(&bp->b_hash_list);
 	init_MUTEX_LOCKED(&bp->b_sema); /* held, no waiters */
@@ -310,8 +310,7 @@ _xfs_buf_free_pages(
 	xfs_buf_t	*bp)
 {
 	if (bp->b_pages != bp->b_page_array) {
-		kmem_free(bp->b_pages,
-			  bp->b_page_count * sizeof(struct page *));
+		kmem_free(bp->b_pages);
 	}
 }
 
@@ -839,6 +838,7 @@ xfs_buf_rele(
 		return;
 	}
 
+	ASSERT(atomic_read(&bp->b_hold) > 0);
 	if (atomic_dec_and_lock(&bp->b_hold, &hash->bh_lock)) {
 		if (bp->b_relse) {
 			atomic_inc(&bp->b_hold);
@@ -852,11 +852,6 @@ xfs_buf_rele(
 			spin_unlock(&hash->bh_lock);
 			xfs_buf_free(bp);
 		}
-	} else {
-		/*
-		 * Catch reference count leaks
-		 */
-		ASSERT(atomic_read(&bp->b_hold) >= 0);
 	}
 }
 
@@ -1038,7 +1033,7 @@ xfs_buf_ioend(
 			xfs_buf_iodone_work(&bp->b_iodone_work);
 		}
 	} else {
-		up(&bp->b_iodonesema);
+		complete(&bp->b_iowait);
 	}
 }
 
@@ -1276,7 +1271,7 @@ xfs_buf_iowait(
 	XB_TRACE(bp, "iowait", 0);
 	if (atomic_read(&bp->b_io_remaining))
 		blk_run_address_space(bp->b_target->bt_mapping);
-	down(&bp->b_iodonesema);
+	wait_for_completion(&bp->b_iowait);
 	XB_TRACE(bp, "iowaited", (long)bp->b_error);
 	return bp->b_error;
 }
@@ -1398,7 +1393,7 @@ STATIC void
 xfs_free_bufhash(
 	xfs_buftarg_t		*btp)
 {
-	kmem_free(btp->bt_hash, (1<<btp->bt_hashshift) * sizeof(xfs_bufhash_t));
+	kmem_free(btp->bt_hash);
 	btp->bt_hash = NULL;
 }
 
@@ -1428,13 +1423,10 @@ xfs_unregister_buftarg(
 
 void
 xfs_free_buftarg(
-	xfs_buftarg_t		*btp,
-	int			external)
+	xfs_buftarg_t		*btp)
 {
 	xfs_flush_buftarg(btp, 1);
 	xfs_blkdev_issue_flush(btp);
-	if (external)
-		xfs_blkdev_put(btp->bt_bdev);
 	xfs_free_bufhash(btp);
 	iput(btp->bt_mapping->host);
 
@@ -1444,7 +1436,7 @@ xfs_free_buftarg(
 	xfs_unregister_buftarg(btp);
 	kthread_stop(btp->bt_task);
 
-	kmem_free(btp, sizeof(*btp));
+	kmem_free(btp);
 }
 
 STATIC int
@@ -1575,7 +1567,7 @@ xfs_alloc_buftarg(
 	return btp;
 
 error:
-	kmem_free(btp, sizeof(*btp));
+	kmem_free(btp);
 	return NULL;
 }
 
@@ -1803,7 +1795,7 @@ int __init
 xfs_buf_init(void)
 {
 #ifdef XFS_BUF_TRACE
-	xfs_buf_trace_buf = ktrace_alloc(XFS_BUF_TRACE_SIZE, KM_SLEEP);
+	xfs_buf_trace_buf = ktrace_alloc(XFS_BUF_TRACE_SIZE, KM_NOFS);
 #endif
 
 	xfs_buf_zone = kmem_zone_init_flags(sizeof(xfs_buf_t), "xfs_buf",
diff --git a/fs/xfs/linux-2.6/xfs_buf.h b/fs/xfs/linux-2.6/xfs_buf.h
index f948ec7ba9a4..fe0109956656 100644
--- a/fs/xfs/linux-2.6/xfs_buf.h
+++ b/fs/xfs/linux-2.6/xfs_buf.h
@@ -157,7 +157,7 @@ typedef struct xfs_buf {
 	xfs_buf_iodone_t	b_iodone;	/* I/O completion function */
 	xfs_buf_relse_t		b_relse;	/* releasing function */
 	xfs_buf_bdstrat_t	b_strat;	/* pre-write function */
-	struct semaphore	b_iodonesema;	/* Semaphore for I/O waiters */
+	struct completion	b_iowait;	/* queue for I/O waiters */
 	void			*b_fspriv;
 	void			*b_fspriv2;
 	void			*b_fspriv3;
@@ -352,7 +352,7 @@ extern void xfs_buf_trace(xfs_buf_t *, char *, void *, void *);
 #define XFS_BUF_CPSEMA(bp)	(xfs_buf_cond_lock(bp) == 0)
 #define XFS_BUF_VSEMA(bp)	xfs_buf_unlock(bp)
 #define XFS_BUF_PSEMA(bp,x)	xfs_buf_lock(bp)
-#define XFS_BUF_V_IODONESEMA(bp) up(&bp->b_iodonesema);
+#define XFS_BUF_FINISH_IOWAIT(bp)	complete(&bp->b_iowait);
 
 #define XFS_BUF_SET_TARGET(bp, target)	((bp)->b_target = (target))
 #define XFS_BUF_TARGET(bp)		((bp)->b_target)
@@ -429,7 +429,7 @@ static inline void xfs_bdwrite(void *mp, xfs_buf_t *bp)
  *	Handling of buftargs.
  */
 extern xfs_buftarg_t *xfs_alloc_buftarg(struct block_device *, int);
-extern void xfs_free_buftarg(xfs_buftarg_t *, int);
+extern void xfs_free_buftarg(xfs_buftarg_t *);
 extern void xfs_wait_buftarg(xfs_buftarg_t *);
 extern int xfs_setsize_buftarg(xfs_buftarg_t *, unsigned int, unsigned int);
 extern int xfs_flush_buftarg(xfs_buftarg_t *, int);
diff --git a/fs/xfs/linux-2.6/xfs_export.c b/fs/xfs/linux-2.6/xfs_export.c
index c672b3238b14..24fd598af846 100644
--- a/fs/xfs/linux-2.6/xfs_export.c
+++ b/fs/xfs/linux-2.6/xfs_export.c
@@ -139,7 +139,7 @@ xfs_nfs_get_inode(
 	}
 
 	xfs_iunlock(ip, XFS_ILOCK_SHARED);
-	return ip->i_vnode;
+	return VFS_I(ip);
 }
 
 STATIC struct dentry *
@@ -167,7 +167,7 @@ xfs_fs_fh_to_dentry(struct super_block *sb, struct fid *fid,
 	if (!inode)
 		return NULL;
 	if (IS_ERR(inode))
-		return ERR_PTR(PTR_ERR(inode));
+		return ERR_CAST(inode);
 	result = d_alloc_anon(inode);
 	if (!result) {
 		iput(inode);
@@ -198,7 +198,7 @@ xfs_fs_fh_to_parent(struct super_block *sb, struct fid *fid,
 	if (!inode)
 		return NULL;
 	if (IS_ERR(inode))
-		return ERR_PTR(PTR_ERR(inode));
+		return ERR_CAST(inode);
 	result = d_alloc_anon(inode);
 	if (!result) {
 		iput(inode);
@@ -215,13 +215,13 @@ xfs_fs_get_parent(
 	struct xfs_inode	*cip;
 	struct dentry		*parent;
 
-	error = xfs_lookup(XFS_I(child->d_inode), &xfs_name_dotdot, &cip);
+	error = xfs_lookup(XFS_I(child->d_inode), &xfs_name_dotdot, &cip, NULL);
 	if (unlikely(error))
 		return ERR_PTR(-error);
 
-	parent = d_alloc_anon(cip->i_vnode);
+	parent = d_alloc_anon(VFS_I(cip));
 	if (unlikely(!parent)) {
-		iput(cip->i_vnode);
+		iput(VFS_I(cip));
 		return ERR_PTR(-ENOMEM);
 	}
 	return parent;
diff --git a/fs/xfs/linux-2.6/xfs_file.c b/fs/xfs/linux-2.6/xfs_file.c
index 5f60363b9343..5311c1acdd40 100644
--- a/fs/xfs/linux-2.6/xfs_file.c
+++ b/fs/xfs/linux-2.6/xfs_file.c
@@ -475,6 +475,7 @@ const struct file_operations xfs_invis_file_operations = {
 const struct file_operations xfs_dir_file_operations = {
 	.read		= generic_read_dir,
 	.readdir	= xfs_file_readdir,
+	.llseek		= generic_file_llseek,
 	.unlocked_ioctl	= xfs_file_ioctl,
 #ifdef CONFIG_COMPAT
 	.compat_ioctl	= xfs_file_compat_ioctl,
diff --git a/fs/xfs/linux-2.6/xfs_fs_subr.c b/fs/xfs/linux-2.6/xfs_fs_subr.c
index 1eefe61f0e10..36caa6d957df 100644
--- a/fs/xfs/linux-2.6/xfs_fs_subr.c
+++ b/fs/xfs/linux-2.6/xfs_fs_subr.c
@@ -31,7 +31,7 @@ xfs_tosspages(
 	xfs_off_t	last,
 	int		fiopt)
 {
-	struct address_space *mapping = ip->i_vnode->i_mapping;
+	struct address_space *mapping = VFS_I(ip)->i_mapping;
 
 	if (mapping->nrpages)
 		truncate_inode_pages(mapping, first);
@@ -44,7 +44,7 @@ xfs_flushinval_pages(
 	xfs_off_t	last,
 	int		fiopt)
 {
-	struct address_space *mapping = ip->i_vnode->i_mapping;
+	struct address_space *mapping = VFS_I(ip)->i_mapping;
 	int		ret = 0;
 
 	if (mapping->nrpages) {
@@ -64,7 +64,7 @@ xfs_flush_pages(
 	uint64_t	flags,
 	int		fiopt)
 {
-	struct address_space *mapping = ip->i_vnode->i_mapping;
+	struct address_space *mapping = VFS_I(ip)->i_mapping;
 	int		ret = 0;
 	int		ret2;
 
diff --git a/fs/xfs/linux-2.6/xfs_ioctl.c b/fs/xfs/linux-2.6/xfs_ioctl.c
index a42ba9d71156..48799ba7e3e6 100644
--- a/fs/xfs/linux-2.6/xfs_ioctl.c
+++ b/fs/xfs/linux-2.6/xfs_ioctl.c
@@ -48,6 +48,8 @@
 #include "xfs_dfrag.h"
 #include "xfs_fsops.h"
 #include "xfs_vnodeops.h"
+#include "xfs_quota.h"
+#include "xfs_inode_item.h"
 
 #include <linux/capability.h>
 #include <linux/dcache.h>
@@ -84,17 +86,15 @@ xfs_find_handle(
 	switch (cmd) {
 	case XFS_IOC_PATH_TO_FSHANDLE:
 	case XFS_IOC_PATH_TO_HANDLE: {
-		struct nameidata	nd;
-		int			error;
-
-		error = user_path_walk_link((const char __user *)hreq.path, &nd);
+		struct path path;
+		int error = user_lpath((const char __user *)hreq.path, &path);
 		if (error)
 			return error;
 
-		ASSERT(nd.path.dentry);
-		ASSERT(nd.path.dentry->d_inode);
-		inode = igrab(nd.path.dentry->d_inode);
-		path_put(&nd.path);
+		ASSERT(path.dentry);
+		ASSERT(path.dentry->d_inode);
+		inode = igrab(path.dentry->d_inode);
+		path_put(&path);
 		break;
 	}
 
@@ -245,7 +245,7 @@ xfs_vget_fsop_handlereq(
 
 	xfs_iunlock(ip, XFS_ILOCK_SHARED);
 
-	*inode = XFS_ITOV(ip);
+	*inode = VFS_I(ip);
 	return 0;
 }
 
@@ -470,6 +470,12 @@ xfs_attrlist_by_handle(
 	if (al_hreq.buflen > XATTR_LIST_MAX)
 		return -XFS_ERROR(EINVAL);
 
+	/*
+	 * Reject flags, only allow namespaces.
+	 */
+	if (al_hreq.flags & ~(ATTR_ROOT | ATTR_SECURE))
+		return -XFS_ERROR(EINVAL);
+
 	error = xfs_vget_fsop_handlereq(mp, parinode, &al_hreq.hreq, &inode);
 	if (error)
 		goto out;
@@ -589,7 +595,7 @@ xfs_attrmulti_by_handle(
 		goto out;
 
 	error = E2BIG;
-	size = am_hreq.opcount * sizeof(attr_multiop_t);
+	size = am_hreq.opcount * sizeof(xfs_attr_multiop_t);
 	if (!size || size > 16 * PAGE_SIZE)
 		goto out_vn_rele;
 
@@ -682,9 +688,9 @@ xfs_ioc_space(
 		return -XFS_ERROR(EFAULT);
 
 	if (filp->f_flags & (O_NDELAY|O_NONBLOCK))
-		attr_flags |= ATTR_NONBLOCK;
+		attr_flags |= XFS_ATTR_NONBLOCK;
 	if (ioflags & IO_INVIS)
-		attr_flags |= ATTR_DMI;
+		attr_flags |= XFS_ATTR_DMI;
 
 	error = xfs_change_file_space(ip, cmd, &bf, filp->f_pos,
 					      NULL, attr_flags);
@@ -875,6 +881,322 @@ xfs_ioc_fsgetxattr(
 	return 0;
 }
 
+STATIC void
+xfs_set_diflags(
+	struct xfs_inode	*ip,
+	unsigned int		xflags)
+{
+	unsigned int		di_flags;
+
+	/* can't set PREALLOC this way, just preserve it */
+	di_flags = (ip->i_d.di_flags & XFS_DIFLAG_PREALLOC);
+	if (xflags & XFS_XFLAG_IMMUTABLE)
+		di_flags |= XFS_DIFLAG_IMMUTABLE;
+	if (xflags & XFS_XFLAG_APPEND)
+		di_flags |= XFS_DIFLAG_APPEND;
+	if (xflags & XFS_XFLAG_SYNC)
+		di_flags |= XFS_DIFLAG_SYNC;
+	if (xflags & XFS_XFLAG_NOATIME)
+		di_flags |= XFS_DIFLAG_NOATIME;
+	if (xflags & XFS_XFLAG_NODUMP)
+		di_flags |= XFS_DIFLAG_NODUMP;
+	if (xflags & XFS_XFLAG_PROJINHERIT)
+		di_flags |= XFS_DIFLAG_PROJINHERIT;
+	if (xflags & XFS_XFLAG_NODEFRAG)
+		di_flags |= XFS_DIFLAG_NODEFRAG;
+	if (xflags & XFS_XFLAG_FILESTREAM)
+		di_flags |= XFS_DIFLAG_FILESTREAM;
+	if ((ip->i_d.di_mode & S_IFMT) == S_IFDIR) {
+		if (xflags & XFS_XFLAG_RTINHERIT)
+			di_flags |= XFS_DIFLAG_RTINHERIT;
+		if (xflags & XFS_XFLAG_NOSYMLINKS)
+			di_flags |= XFS_DIFLAG_NOSYMLINKS;
+		if (xflags & XFS_XFLAG_EXTSZINHERIT)
+			di_flags |= XFS_DIFLAG_EXTSZINHERIT;
+	} else if ((ip->i_d.di_mode & S_IFMT) == S_IFREG) {
+		if (xflags & XFS_XFLAG_REALTIME)
+			di_flags |= XFS_DIFLAG_REALTIME;
+		if (xflags & XFS_XFLAG_EXTSIZE)
+			di_flags |= XFS_DIFLAG_EXTSIZE;
+	}
+
+	ip->i_d.di_flags = di_flags;
+}
+
+STATIC void
+xfs_diflags_to_linux(
+	struct xfs_inode	*ip)
+{
+	struct inode		*inode = VFS_I(ip);
+	unsigned int		xflags = xfs_ip2xflags(ip);
+
+	if (xflags & XFS_XFLAG_IMMUTABLE)
+		inode->i_flags |= S_IMMUTABLE;
+	else
+		inode->i_flags &= ~S_IMMUTABLE;
+	if (xflags & XFS_XFLAG_APPEND)
+		inode->i_flags |= S_APPEND;
+	else
+		inode->i_flags &= ~S_APPEND;
+	if (xflags & XFS_XFLAG_SYNC)
+		inode->i_flags |= S_SYNC;
+	else
+		inode->i_flags &= ~S_SYNC;
+	if (xflags & XFS_XFLAG_NOATIME)
+		inode->i_flags |= S_NOATIME;
+	else
+		inode->i_flags &= ~S_NOATIME;
+}
+
+#define FSX_PROJID	1
+#define FSX_EXTSIZE	2
+#define FSX_XFLAGS	4
+#define FSX_NONBLOCK	8
+
+STATIC int
+xfs_ioctl_setattr(
+	xfs_inode_t		*ip,
+	struct fsxattr		*fa,
+	int			mask)
+{
+	struct xfs_mount	*mp = ip->i_mount;
+	struct xfs_trans	*tp;
+	unsigned int		lock_flags = 0;
+	struct xfs_dquot	*udqp = NULL, *gdqp = NULL;
+	struct xfs_dquot	*olddquot = NULL;
+	int			code;
+
+	xfs_itrace_entry(ip);
+
+	if (mp->m_flags & XFS_MOUNT_RDONLY)
+		return XFS_ERROR(EROFS);
+	if (XFS_FORCED_SHUTDOWN(mp))
+		return XFS_ERROR(EIO);
+
+	/*
+	 * If disk quotas is on, we make sure that the dquots do exist on disk,
+	 * before we start any other transactions. Trying to do this later
+	 * is messy. We don't care to take a readlock to look at the ids
+	 * in inode here, because we can't hold it across the trans_reserve.
+	 * If the IDs do change before we take the ilock, we're covered
+	 * because the i_*dquot fields will get updated anyway.
+	 */
+	if (XFS_IS_QUOTA_ON(mp) && (mask & FSX_PROJID)) {
+		code = XFS_QM_DQVOPALLOC(mp, ip, ip->i_d.di_uid,
+					 ip->i_d.di_gid, fa->fsx_projid,
+					 XFS_QMOPT_PQUOTA, &udqp, &gdqp);
+		if (code)
+			return code;
+	}
+
+	/*
+	 * For the other attributes, we acquire the inode lock and
+	 * first do an error checking pass.
+	 */
+	tp = xfs_trans_alloc(mp, XFS_TRANS_SETATTR_NOT_SIZE);
+	code = xfs_trans_reserve(tp, 0, XFS_ICHANGE_LOG_RES(mp), 0, 0, 0);
+	if (code)
+		goto error_return;
+
+	lock_flags = XFS_ILOCK_EXCL;
+	xfs_ilock(ip, lock_flags);
+
+	/*
+	 * CAP_FOWNER overrides the following restrictions:
+	 *
+	 * The user ID of the calling process must be equal
+	 * to the file owner ID, except in cases where the
+	 * CAP_FSETID capability is applicable.
+	 */
+	if (current->fsuid != ip->i_d.di_uid && !capable(CAP_FOWNER)) {
+		code = XFS_ERROR(EPERM);
+		goto error_return;
+	}
+
+	/*
+	 * Do a quota reservation only if projid is actually going to change.
+	 */
+	if (mask & FSX_PROJID) {
+		if (XFS_IS_PQUOTA_ON(mp) &&
+		    ip->i_d.di_projid != fa->fsx_projid) {
+			ASSERT(tp);
+			code = XFS_QM_DQVOPCHOWNRESV(mp, tp, ip, udqp, gdqp,
+						capable(CAP_FOWNER) ?
+						XFS_QMOPT_FORCE_RES : 0);
+			if (code)	/* out of quota */
+				goto error_return;
+		}
+	}
+
+	if (mask & FSX_EXTSIZE) {
+		/*
+		 * Can't change extent size if any extents are allocated.
+		 */
+		if (ip->i_d.di_nextents &&
+		    ((ip->i_d.di_extsize << mp->m_sb.sb_blocklog) !=
+		     fa->fsx_extsize)) {
+			code = XFS_ERROR(EINVAL);	/* EFBIG? */
+			goto error_return;
+		}
+
+		/*
+		 * Extent size must be a multiple of the appropriate block
+		 * size, if set at all.
+		 */
+		if (fa->fsx_extsize != 0) {
+			xfs_extlen_t	size;
+
+			if (XFS_IS_REALTIME_INODE(ip) ||
+			    ((mask & FSX_XFLAGS) &&
+			    (fa->fsx_xflags & XFS_XFLAG_REALTIME))) {
+				size = mp->m_sb.sb_rextsize <<
+				       mp->m_sb.sb_blocklog;
+			} else {
+				size = mp->m_sb.sb_blocksize;
+			}
+
+			if (fa->fsx_extsize % size) {
+				code = XFS_ERROR(EINVAL);
+				goto error_return;
+			}
+		}
+	}
+
+
+	if (mask & FSX_XFLAGS) {
+		/*
+		 * Can't change realtime flag if any extents are allocated.
+		 */
+		if ((ip->i_d.di_nextents || ip->i_delayed_blks) &&
+		    (XFS_IS_REALTIME_INODE(ip)) !=
+		    (fa->fsx_xflags & XFS_XFLAG_REALTIME)) {
+			code = XFS_ERROR(EINVAL);	/* EFBIG? */
+			goto error_return;
+		}
+
+		/*
+		 * If realtime flag is set then must have realtime data.
+		 */
+		if ((fa->fsx_xflags & XFS_XFLAG_REALTIME)) {
+			if ((mp->m_sb.sb_rblocks == 0) ||
+			    (mp->m_sb.sb_rextsize == 0) ||
+			    (ip->i_d.di_extsize % mp->m_sb.sb_rextsize)) {
+				code = XFS_ERROR(EINVAL);
+				goto error_return;
+			}
+		}
+
+		/*
+		 * Can't modify an immutable/append-only file unless
+		 * we have appropriate permission.
+		 */
+		if ((ip->i_d.di_flags &
+				(XFS_DIFLAG_IMMUTABLE|XFS_DIFLAG_APPEND) ||
+		     (fa->fsx_xflags &
+				(XFS_XFLAG_IMMUTABLE | XFS_XFLAG_APPEND))) &&
+		    !capable(CAP_LINUX_IMMUTABLE)) {
+			code = XFS_ERROR(EPERM);
+			goto error_return;
+		}
+	}
+
+	xfs_trans_ijoin(tp, ip, lock_flags);
+	xfs_trans_ihold(tp, ip);
+
+	/*
+	 * Change file ownership.  Must be the owner or privileged.
+	 * If the system was configured with the "restricted_chown"
+	 * option, the owner is not permitted to give away the file,
+	 * and can change the group id only to a group of which he
+	 * or she is a member.
+	 */
+	if (mask & FSX_PROJID) {
+		/*
+		 * CAP_FSETID overrides the following restrictions:
+		 *
+		 * The set-user-ID and set-group-ID bits of a file will be
+		 * cleared upon successful return from chown()
+		 */
+		if ((ip->i_d.di_mode & (S_ISUID|S_ISGID)) &&
+		    !capable(CAP_FSETID))
+			ip->i_d.di_mode &= ~(S_ISUID|S_ISGID);
+
+		/*
+		 * Change the ownerships and register quota modifications
+		 * in the transaction.
+		 */
+		if (ip->i_d.di_projid != fa->fsx_projid) {
+			if (XFS_IS_PQUOTA_ON(mp)) {
+				olddquot = XFS_QM_DQVOPCHOWN(mp, tp, ip,
+							&ip->i_gdquot, gdqp);
+			}
+			ip->i_d.di_projid = fa->fsx_projid;
+
+			/*
+			 * We may have to rev the inode as well as
+			 * the superblock version number since projids didn't
+			 * exist before DINODE_VERSION_2 and SB_VERSION_NLINK.
+			 */
+			if (ip->i_d.di_version == XFS_DINODE_VERSION_1)
+				xfs_bump_ino_vers2(tp, ip);
+		}
+
+	}
+
+	if (mask & FSX_EXTSIZE)
+		ip->i_d.di_extsize = fa->fsx_extsize >> mp->m_sb.sb_blocklog;
+	if (mask & FSX_XFLAGS) {
+		xfs_set_diflags(ip, fa->fsx_xflags);
+		xfs_diflags_to_linux(ip);
+	}
+
+	xfs_trans_log_inode(tp, ip, XFS_ILOG_CORE);
+	xfs_ichgtime(ip, XFS_ICHGTIME_CHG);
+
+	XFS_STATS_INC(xs_ig_attrchg);
+
+	/*
+	 * If this is a synchronous mount, make sure that the
+	 * transaction goes to disk before returning to the user.
+	 * This is slightly sub-optimal in that truncates require
+	 * two sync transactions instead of one for wsync filesystems.
+	 * One for the truncate and one for the timestamps since we
+	 * don't want to change the timestamps unless we're sure the
+	 * truncate worked.  Truncates are less than 1% of the laddis
+	 * mix so this probably isn't worth the trouble to optimize.
+	 */
+	if (mp->m_flags & XFS_MOUNT_WSYNC)
+		xfs_trans_set_sync(tp);
+	code = xfs_trans_commit(tp, 0);
+	xfs_iunlock(ip, lock_flags);
+
+	/*
+	 * Release any dquot(s) the inode had kept before chown.
+	 */
+	XFS_QM_DQRELE(mp, olddquot);
+	XFS_QM_DQRELE(mp, udqp);
+	XFS_QM_DQRELE(mp, gdqp);
+
+	if (code)
+		return code;
+
+	if (DM_EVENT_ENABLED(ip, DM_EVENT_ATTRIBUTE)) {
+		XFS_SEND_NAMESP(mp, DM_EVENT_ATTRIBUTE, ip, DM_RIGHT_NULL,
+				NULL, DM_RIGHT_NULL, NULL, NULL, 0, 0,
+				(mask & FSX_NONBLOCK) ? DM_FLAGS_NDELAY : 0);
+	}
+
+	return 0;
+
+ error_return:
+	XFS_QM_DQRELE(mp, udqp);
+	XFS_QM_DQRELE(mp, gdqp);
+	xfs_trans_cancel(tp, 0);
+	if (lock_flags)
+		xfs_iunlock(ip, lock_flags);
+	return code;
+}
+
 STATIC int
 xfs_ioc_fssetxattr(
 	xfs_inode_t		*ip,
@@ -882,31 +1204,16 @@ xfs_ioc_fssetxattr(
 	void			__user *arg)
 {
 	struct fsxattr		fa;
-	struct bhv_vattr	*vattr;
-	int			error;
-	int			attr_flags;
+	unsigned int		mask;
 
 	if (copy_from_user(&fa, arg, sizeof(fa)))
 		return -EFAULT;
 
-	vattr = kmalloc(sizeof(*vattr), GFP_KERNEL);
-	if (unlikely(!vattr))
-		return -ENOMEM;
-
-	attr_flags = 0;
+	mask = FSX_XFLAGS | FSX_EXTSIZE | FSX_PROJID;
 	if (filp->f_flags & (O_NDELAY|O_NONBLOCK))
-		attr_flags |= ATTR_NONBLOCK;
-
-	vattr->va_mask = XFS_AT_XFLAGS | XFS_AT_EXTSIZE | XFS_AT_PROJID;
-	vattr->va_xflags  = fa.fsx_xflags;
-	vattr->va_extsize = fa.fsx_extsize;
-	vattr->va_projid  = fa.fsx_projid;
+		mask |= FSX_NONBLOCK;
 
-	error = -xfs_setattr(ip, vattr, attr_flags, NULL);
-	if (!error)
-		vn_revalidate(XFS_ITOV(ip));	/* update flags */
-	kfree(vattr);
-	return 0;
+	return -xfs_ioctl_setattr(ip, &fa, mask);
 }
 
 STATIC int
@@ -928,10 +1235,9 @@ xfs_ioc_setxflags(
 	struct file		*filp,
 	void			__user *arg)
 {
-	struct bhv_vattr	*vattr;
+	struct fsxattr		fa;
 	unsigned int		flags;
-	int			attr_flags;
-	int			error;
+	unsigned int		mask;
 
 	if (copy_from_user(&flags, arg, sizeof(flags)))
 		return -EFAULT;
@@ -941,22 +1247,12 @@ xfs_ioc_setxflags(
 		      FS_SYNC_FL))
 		return -EOPNOTSUPP;
 
-	vattr = kmalloc(sizeof(*vattr), GFP_KERNEL);
-	if (unlikely(!vattr))
-		return -ENOMEM;
-
-	attr_flags = 0;
+	mask = FSX_XFLAGS;
 	if (filp->f_flags & (O_NDELAY|O_NONBLOCK))
-		attr_flags |= ATTR_NONBLOCK;
-
-	vattr->va_mask = XFS_AT_XFLAGS;
-	vattr->va_xflags = xfs_merge_ioc_xflags(flags, xfs_ip2xflags(ip));
+		mask |= FSX_NONBLOCK;
+	fa.fsx_xflags = xfs_merge_ioc_xflags(flags, xfs_ip2xflags(ip));
 
-	error = -xfs_setattr(ip, vattr, attr_flags, NULL);
-	if (likely(!error))
-		vn_revalidate(XFS_ITOV(ip));	/* update flags */
-	kfree(vattr);
-	return error;
+	return -xfs_ioctl_setattr(ip, &fa, mask);
 }
 
 STATIC int
diff --git a/fs/xfs/linux-2.6/xfs_iops.c b/fs/xfs/linux-2.6/xfs_iops.c
index 2bf287ef5489..095d271f3434 100644
--- a/fs/xfs/linux-2.6/xfs_iops.c
+++ b/fs/xfs/linux-2.6/xfs_iops.c
@@ -62,7 +62,7 @@ void
 xfs_synchronize_atime(
 	xfs_inode_t	*ip)
 {
-	struct inode	*inode = ip->i_vnode;
+	struct inode	*inode = VFS_I(ip);
 
 	if (inode) {
 		ip->i_d.di_atime.t_sec = (__int32_t)inode->i_atime.tv_sec;
@@ -79,7 +79,7 @@ void
 xfs_mark_inode_dirty_sync(
 	xfs_inode_t	*ip)
 {
-	struct inode	*inode = ip->i_vnode;
+	struct inode	*inode = VFS_I(ip);
 
 	if (inode)
 		mark_inode_dirty_sync(inode);
@@ -89,36 +89,31 @@ xfs_mark_inode_dirty_sync(
  * Change the requested timestamp in the given inode.
  * We don't lock across timestamp updates, and we don't log them but
  * we do record the fact that there is dirty information in core.
- *
- * NOTE -- callers MUST combine XFS_ICHGTIME_MOD or XFS_ICHGTIME_CHG
- *		with XFS_ICHGTIME_ACC to be sure that access time
- *		update will take.  Calling first with XFS_ICHGTIME_ACC
- *		and then XFS_ICHGTIME_MOD may fail to modify the access
- *		timestamp if the filesystem is mounted noacctm.
  */
 void
 xfs_ichgtime(
 	xfs_inode_t	*ip,
 	int		flags)
 {
-	struct inode	*inode = vn_to_inode(XFS_ITOV(ip));
+	struct inode	*inode = VFS_I(ip);
 	timespec_t	tv;
+	int		sync_it = 0;
+
+	tv = current_fs_time(inode->i_sb);
 
-	nanotime(&tv);
-	if (flags & XFS_ICHGTIME_MOD) {
+	if ((flags & XFS_ICHGTIME_MOD) &&
+	    !timespec_equal(&inode->i_mtime, &tv)) {
 		inode->i_mtime = tv;
 		ip->i_d.di_mtime.t_sec = (__int32_t)tv.tv_sec;
 		ip->i_d.di_mtime.t_nsec = (__int32_t)tv.tv_nsec;
+		sync_it = 1;
 	}
-	if (flags & XFS_ICHGTIME_ACC) {
-		inode->i_atime = tv;
-		ip->i_d.di_atime.t_sec = (__int32_t)tv.tv_sec;
-		ip->i_d.di_atime.t_nsec = (__int32_t)tv.tv_nsec;
-	}
-	if (flags & XFS_ICHGTIME_CHG) {
+	if ((flags & XFS_ICHGTIME_CHG) &&
+	    !timespec_equal(&inode->i_ctime, &tv)) {
 		inode->i_ctime = tv;
 		ip->i_d.di_ctime.t_sec = (__int32_t)tv.tv_sec;
 		ip->i_d.di_ctime.t_nsec = (__int32_t)tv.tv_nsec;
+		sync_it = 1;
 	}
 
 	/*
@@ -130,72 +125,11 @@ xfs_ichgtime(
 	 * ensure that the compiler does not reorder the update
 	 * of i_update_core above the timestamp updates above.
 	 */
-	SYNCHRONIZE();
-	ip->i_update_core = 1;
-	if (!(inode->i_state & I_NEW))
+	if (sync_it) {
+		SYNCHRONIZE();
+		ip->i_update_core = 1;
 		mark_inode_dirty_sync(inode);
-}
-
-/*
- * Variant on the above which avoids querying the system clock
- * in situations where we know the Linux inode timestamps have
- * just been updated (and so we can update our inode cheaply).
- */
-void
-xfs_ichgtime_fast(
-	xfs_inode_t	*ip,
-	struct inode	*inode,
-	int		flags)
-{
-	timespec_t	*tvp;
-
-	/*
-	 * Atime updates for read() & friends are handled lazily now, and
-	 * explicit updates must go through xfs_ichgtime()
-	 */
-	ASSERT((flags & XFS_ICHGTIME_ACC) == 0);
-
-	if (flags & XFS_ICHGTIME_MOD) {
-		tvp = &inode->i_mtime;
-		ip->i_d.di_mtime.t_sec = (__int32_t)tvp->tv_sec;
-		ip->i_d.di_mtime.t_nsec = (__int32_t)tvp->tv_nsec;
-	}
-	if (flags & XFS_ICHGTIME_CHG) {
-		tvp = &inode->i_ctime;
-		ip->i_d.di_ctime.t_sec = (__int32_t)tvp->tv_sec;
-		ip->i_d.di_ctime.t_nsec = (__int32_t)tvp->tv_nsec;
 	}
-
-	/*
-	 * We update the i_update_core field _after_ changing
-	 * the timestamps in order to coordinate properly with
-	 * xfs_iflush() so that we don't lose timestamp updates.
-	 * This keeps us from having to hold the inode lock
-	 * while doing this.  We use the SYNCHRONIZE macro to
-	 * ensure that the compiler does not reorder the update
-	 * of i_update_core above the timestamp updates above.
-	 */
-	SYNCHRONIZE();
-	ip->i_update_core = 1;
-	if (!(inode->i_state & I_NEW))
-		mark_inode_dirty_sync(inode);
-}
-
-
-/*
- * Pull the link count and size up from the xfs inode to the linux inode
- */
-STATIC void
-xfs_validate_fields(
-	struct inode		*inode)
-{
-	struct xfs_inode	*ip = XFS_I(inode);
-	loff_t size;
-
-	/* we're under i_sem so i_size can't change under us */
-	size = XFS_ISIZE(ip);
-	if (i_size_read(inode) != size)
-		i_size_write(inode, size);
 }
 
 /*
@@ -245,8 +179,7 @@ STATIC void
 xfs_cleanup_inode(
 	struct inode	*dir,
 	struct inode	*inode,
-	struct dentry	*dentry,
-	int		mode)
+	struct dentry	*dentry)
 {
 	struct xfs_name	teardown;
 
@@ -257,10 +190,7 @@ xfs_cleanup_inode(
 	 */
 	xfs_dentry_to_name(&teardown, dentry);
 
-	if (S_ISDIR(mode))
-		xfs_rmdir(XFS_I(dir), &teardown, XFS_I(inode));
-	else
-		xfs_remove(XFS_I(dir), &teardown, XFS_I(inode));
+	xfs_remove(XFS_I(dir), &teardown, XFS_I(inode));
 	iput(inode);
 }
 
@@ -275,7 +205,7 @@ xfs_vn_mknod(
 	struct xfs_inode *ip = NULL;
 	xfs_acl_t	*default_acl = NULL;
 	struct xfs_name	name;
-	attrexists_t	test_default_acl = _ACL_DEFAULT_EXISTS;
+	int (*test_default_acl)(struct inode *) = _ACL_DEFAULT_EXISTS;
 	int		error;
 
 	/*
@@ -320,7 +250,7 @@ xfs_vn_mknod(
 	if (unlikely(error))
 		goto out_free_acl;
 
-	inode = ip->i_vnode;
+	inode = VFS_I(ip);
 
 	error = xfs_init_security(inode, dir);
 	if (unlikely(error))
@@ -335,14 +265,11 @@ xfs_vn_mknod(
 	}
 
 
-	if (S_ISDIR(mode))
-		xfs_validate_fields(inode);
 	d_instantiate(dentry, inode);
-	xfs_validate_fields(dir);
 	return -error;
 
  out_cleanup_inode:
-	xfs_cleanup_inode(dir, inode, dentry, mode);
+	xfs_cleanup_inode(dir, inode, dentry);
  out_free_acl:
 	if (default_acl)
 		_ACL_FREE(default_acl);
@@ -382,7 +309,7 @@ xfs_vn_lookup(
 		return ERR_PTR(-ENAMETOOLONG);
 
 	xfs_dentry_to_name(&name, dentry);
-	error = xfs_lookup(XFS_I(dir), &name, &cip);
+	error = xfs_lookup(XFS_I(dir), &name, &cip, NULL);
 	if (unlikely(error)) {
 		if (unlikely(error != ENOENT))
 			return ERR_PTR(-error);
@@ -390,7 +317,47 @@ xfs_vn_lookup(
 		return NULL;
 	}
 
-	return d_splice_alias(cip->i_vnode, dentry);
+	return d_splice_alias(VFS_I(cip), dentry);
+}
+
+STATIC struct dentry *
+xfs_vn_ci_lookup(
+	struct inode	*dir,
+	struct dentry	*dentry,
+	struct nameidata *nd)
+{
+	struct xfs_inode *ip;
+	struct xfs_name	xname;
+	struct xfs_name ci_name;
+	struct qstr	dname;
+	int		error;
+
+	if (dentry->d_name.len >= MAXNAMELEN)
+		return ERR_PTR(-ENAMETOOLONG);
+
+	xfs_dentry_to_name(&xname, dentry);
+	error = xfs_lookup(XFS_I(dir), &xname, &ip, &ci_name);
+	if (unlikely(error)) {
+		if (unlikely(error != ENOENT))
+			return ERR_PTR(-error);
+		/*
+		 * call d_add(dentry, NULL) here when d_drop_negative_children
+		 * is called in xfs_vn_mknod (ie. allow negative dentries
+		 * with CI filesystems).
+		 */
+		return NULL;
+	}
+
+	/* if exact match, just splice and exit */
+	if (!ci_name.name)
+		return d_splice_alias(VFS_I(ip), dentry);
+
+	/* else case-insensitive match... */
+	dname.name = ci_name.name;
+	dname.len = ci_name.len;
+	dentry = d_add_ci(dentry, VFS_I(ip), &dname);
+	kmem_free(ci_name.name);
+	return dentry;
 }
 
 STATIC int
@@ -414,7 +381,6 @@ xfs_vn_link(
 	}
 
 	xfs_iflags_set(XFS_I(dir), XFS_IMODIFIED);
-	xfs_validate_fields(inode);
 	d_instantiate(dentry, inode);
 	return 0;
 }
@@ -424,19 +390,23 @@ xfs_vn_unlink(
 	struct inode	*dir,
 	struct dentry	*dentry)
 {
-	struct inode	*inode;
 	struct xfs_name	name;
 	int		error;
 
-	inode = dentry->d_inode;
 	xfs_dentry_to_name(&name, dentry);
 
-	error = xfs_remove(XFS_I(dir), &name, XFS_I(inode));
-	if (likely(!error)) {
-		xfs_validate_fields(dir);	/* size needs update */
-		xfs_validate_fields(inode);
-	}
-	return -error;
+	error = -xfs_remove(XFS_I(dir), &name, XFS_I(dentry->d_inode));
+	if (error)
+		return error;
+
+	/*
+	 * With unlink, the VFS makes the dentry "negative": no inode,
+	 * but still hashed. This is incompatible with case-insensitive
+	 * mode, so invalidate (unhash) the dentry in CI-mode.
+	 */
+	if (xfs_sb_version_hasasciici(&XFS_M(dir->i_sb)->m_sb))
+		d_invalidate(dentry);
+	return 0;
 }
 
 STATIC int
@@ -459,43 +429,22 @@ xfs_vn_symlink(
 	if (unlikely(error))
 		goto out;
 
-	inode = cip->i_vnode;
+	inode = VFS_I(cip);
 
 	error = xfs_init_security(inode, dir);
 	if (unlikely(error))
 		goto out_cleanup_inode;
 
 	d_instantiate(dentry, inode);
-	xfs_validate_fields(dir);
-	xfs_validate_fields(inode);
 	return 0;
 
  out_cleanup_inode:
-	xfs_cleanup_inode(dir, inode, dentry, 0);
+	xfs_cleanup_inode(dir, inode, dentry);
  out:
 	return -error;
 }
 
 STATIC int
-xfs_vn_rmdir(
-	struct inode	*dir,
-	struct dentry	*dentry)
-{
-	struct inode	*inode = dentry->d_inode;
-	struct xfs_name	name;
-	int		error;
-
-	xfs_dentry_to_name(&name, dentry);
-
-	error = xfs_rmdir(XFS_I(dir), &name, XFS_I(inode));
-	if (likely(!error)) {
-		xfs_validate_fields(inode);
-		xfs_validate_fields(dir);
-	}
-	return -error;
-}
-
-STATIC int
 xfs_vn_rename(
 	struct inode	*odir,
 	struct dentry	*odentry,
@@ -505,22 +454,13 @@ xfs_vn_rename(
 	struct inode	*new_inode = ndentry->d_inode;
 	struct xfs_name	oname;
 	struct xfs_name	nname;
-	int		error;
 
 	xfs_dentry_to_name(&oname, odentry);
 	xfs_dentry_to_name(&nname, ndentry);
 
-	error = xfs_rename(XFS_I(odir), &oname, XFS_I(odentry->d_inode),
+	return -xfs_rename(XFS_I(odir), &oname, XFS_I(odentry->d_inode),
 			   XFS_I(ndir), &nname, new_inode ?
 			   			XFS_I(new_inode) : NULL);
-	if (likely(!error)) {
-		if (new_inode)
-			xfs_validate_fields(new_inode);
-		xfs_validate_fields(odir);
-		if (ndir != odir)
-			xfs_validate_fields(ndir);
-	}
-	return -error;
 }
 
 /*
@@ -589,8 +529,7 @@ xfs_check_acl(
 STATIC int
 xfs_vn_permission(
 	struct inode		*inode,
-	int			mask,
-	struct nameidata	*nd)
+	int			mask)
 {
 	return generic_permission(inode, mask, xfs_check_acl);
 }
@@ -660,57 +599,9 @@ xfs_vn_getattr(
 STATIC int
 xfs_vn_setattr(
 	struct dentry	*dentry,
-	struct iattr	*attr)
+	struct iattr	*iattr)
 {
-	struct inode	*inode = dentry->d_inode;
-	unsigned int	ia_valid = attr->ia_valid;
-	bhv_vattr_t	vattr = { 0 };
-	int		flags = 0;
-	int		error;
-
-	if (ia_valid & ATTR_UID) {
-		vattr.va_mask |= XFS_AT_UID;
-		vattr.va_uid = attr->ia_uid;
-	}
-	if (ia_valid & ATTR_GID) {
-		vattr.va_mask |= XFS_AT_GID;
-		vattr.va_gid = attr->ia_gid;
-	}
-	if (ia_valid & ATTR_SIZE) {
-		vattr.va_mask |= XFS_AT_SIZE;
-		vattr.va_size = attr->ia_size;
-	}
-	if (ia_valid & ATTR_ATIME) {
-		vattr.va_mask |= XFS_AT_ATIME;
-		vattr.va_atime = attr->ia_atime;
-		inode->i_atime = attr->ia_atime;
-	}
-	if (ia_valid & ATTR_MTIME) {
-		vattr.va_mask |= XFS_AT_MTIME;
-		vattr.va_mtime = attr->ia_mtime;
-	}
-	if (ia_valid & ATTR_CTIME) {
-		vattr.va_mask |= XFS_AT_CTIME;
-		vattr.va_ctime = attr->ia_ctime;
-	}
-	if (ia_valid & ATTR_MODE) {
-		vattr.va_mask |= XFS_AT_MODE;
-		vattr.va_mode = attr->ia_mode;
-		if (!in_group_p(inode->i_gid) && !capable(CAP_FSETID))
-			inode->i_mode &= ~S_ISGID;
-	}
-
-	if (ia_valid & (ATTR_MTIME_SET | ATTR_ATIME_SET))
-		flags |= ATTR_UTIME;
-#ifdef ATTR_NO_BLOCK
-	if ((ia_valid & ATTR_NO_BLOCK))
-		flags |= ATTR_NONBLOCK;
-#endif
-
-	error = xfs_setattr(XFS_I(inode), &vattr, flags, NULL);
-	if (likely(!error))
-		vn_revalidate(vn_from_inode(inode));
-	return -error;
+	return -xfs_setattr(XFS_I(dentry->d_inode), iattr, 0, NULL);
 }
 
 /*
@@ -728,109 +619,6 @@ xfs_vn_truncate(
 	WARN_ON(error);
 }
 
-STATIC int
-xfs_vn_setxattr(
-	struct dentry	*dentry,
-	const char	*name,
-	const void	*data,
-	size_t		size,
-	int		flags)
-{
-	bhv_vnode_t	*vp = vn_from_inode(dentry->d_inode);
-	char		*attr = (char *)name;
-	attrnames_t	*namesp;
-	int		xflags = 0;
-	int		error;
-
-	namesp = attr_lookup_namespace(attr, attr_namespaces, ATTR_NAMECOUNT);
-	if (!namesp)
-		return -EOPNOTSUPP;
-	attr += namesp->attr_namelen;
-	error = namesp->attr_capable(vp, NULL);
-	if (error)
-		return error;
-
-	/* Convert Linux syscall to XFS internal ATTR flags */
-	if (flags & XATTR_CREATE)
-		xflags |= ATTR_CREATE;
-	if (flags & XATTR_REPLACE)
-		xflags |= ATTR_REPLACE;
-	xflags |= namesp->attr_flag;
-	return namesp->attr_set(vp, attr, (void *)data, size, xflags);
-}
-
-STATIC ssize_t
-xfs_vn_getxattr(
-	struct dentry	*dentry,
-	const char	*name,
-	void		*data,
-	size_t		size)
-{
-	bhv_vnode_t	*vp = vn_from_inode(dentry->d_inode);
-	char		*attr = (char *)name;
-	attrnames_t	*namesp;
-	int		xflags = 0;
-	ssize_t		error;
-
-	namesp = attr_lookup_namespace(attr, attr_namespaces, ATTR_NAMECOUNT);
-	if (!namesp)
-		return -EOPNOTSUPP;
-	attr += namesp->attr_namelen;
-	error = namesp->attr_capable(vp, NULL);
-	if (error)
-		return error;
-
-	/* Convert Linux syscall to XFS internal ATTR flags */
-	if (!size) {
-		xflags |= ATTR_KERNOVAL;
-		data = NULL;
-	}
-	xflags |= namesp->attr_flag;
-	return namesp->attr_get(vp, attr, (void *)data, size, xflags);
-}
-
-STATIC ssize_t
-xfs_vn_listxattr(
-	struct dentry		*dentry,
-	char			*data,
-	size_t			size)
-{
-	bhv_vnode_t		*vp = vn_from_inode(dentry->d_inode);
-	int			error, xflags = ATTR_KERNAMELS;
-	ssize_t			result;
-
-	if (!size)
-		xflags |= ATTR_KERNOVAL;
-	xflags |= capable(CAP_SYS_ADMIN) ? ATTR_KERNFULLS : ATTR_KERNORMALS;
-
-	error = attr_generic_list(vp, data, size, xflags, &result);
-	if (error < 0)
-		return error;
-	return result;
-}
-
-STATIC int
-xfs_vn_removexattr(
-	struct dentry	*dentry,
-	const char	*name)
-{
-	bhv_vnode_t	*vp = vn_from_inode(dentry->d_inode);
-	char		*attr = (char *)name;
-	attrnames_t	*namesp;
-	int		xflags = 0;
-	int		error;
-
-	namesp = attr_lookup_namespace(attr, attr_namespaces, ATTR_NAMECOUNT);
-	if (!namesp)
-		return -EOPNOTSUPP;
-	attr += namesp->attr_namelen;
-	error = namesp->attr_capable(vp, NULL);
-	if (error)
-		return error;
-	xflags |= namesp->attr_flag;
-	return namesp->attr_remove(vp, attr, xflags);
-}
-
 STATIC long
 xfs_vn_fallocate(
 	struct inode	*inode,
@@ -854,18 +642,18 @@ xfs_vn_fallocate(
 
 	xfs_ilock(ip, XFS_IOLOCK_EXCL);
 	error = xfs_change_file_space(ip, XFS_IOC_RESVSP, &bf,
-						0, NULL, ATTR_NOLOCK);
+				      0, NULL, XFS_ATTR_NOLOCK);
 	if (!error && !(mode & FALLOC_FL_KEEP_SIZE) &&
 	    offset + len > i_size_read(inode))
 		new_size = offset + len;
 
 	/* Change file size if needed */
 	if (new_size) {
-		bhv_vattr_t	va;
+		struct iattr iattr;
 
-		va.va_mask = XFS_AT_SIZE;
-		va.va_size = new_size;
-		error = xfs_setattr(ip, &va, ATTR_NOLOCK, NULL);
+		iattr.ia_valid = ATTR_SIZE;
+		iattr.ia_size = new_size;
+		error = xfs_setattr(ip, &iattr, XFS_ATTR_NOLOCK, NULL);
 	}
 
 	xfs_iunlock(ip, XFS_IOLOCK_EXCL);
@@ -873,46 +661,172 @@ out_error:
 	return error;
 }
 
-const struct inode_operations xfs_inode_operations = {
+static const struct inode_operations xfs_inode_operations = {
 	.permission		= xfs_vn_permission,
 	.truncate		= xfs_vn_truncate,
 	.getattr		= xfs_vn_getattr,
 	.setattr		= xfs_vn_setattr,
-	.setxattr		= xfs_vn_setxattr,
-	.getxattr		= xfs_vn_getxattr,
+	.setxattr		= generic_setxattr,
+	.getxattr		= generic_getxattr,
+	.removexattr		= generic_removexattr,
 	.listxattr		= xfs_vn_listxattr,
-	.removexattr		= xfs_vn_removexattr,
 	.fallocate		= xfs_vn_fallocate,
 };
 
-const struct inode_operations xfs_dir_inode_operations = {
+static const struct inode_operations xfs_dir_inode_operations = {
 	.create			= xfs_vn_create,
 	.lookup			= xfs_vn_lookup,
 	.link			= xfs_vn_link,
 	.unlink			= xfs_vn_unlink,
 	.symlink		= xfs_vn_symlink,
 	.mkdir			= xfs_vn_mkdir,
-	.rmdir			= xfs_vn_rmdir,
+	/*
+	 * Yes, XFS uses the same method for rmdir and unlink.
+	 *
+	 * There are some subtile differences deeper in the code,
+	 * but we use S_ISDIR to check for those.
+	 */
+	.rmdir			= xfs_vn_unlink,
 	.mknod			= xfs_vn_mknod,
 	.rename			= xfs_vn_rename,
 	.permission		= xfs_vn_permission,
 	.getattr		= xfs_vn_getattr,
 	.setattr		= xfs_vn_setattr,
-	.setxattr		= xfs_vn_setxattr,
-	.getxattr		= xfs_vn_getxattr,
+	.setxattr		= generic_setxattr,
+	.getxattr		= generic_getxattr,
+	.removexattr		= generic_removexattr,
 	.listxattr		= xfs_vn_listxattr,
-	.removexattr		= xfs_vn_removexattr,
 };
 
-const struct inode_operations xfs_symlink_inode_operations = {
+static const struct inode_operations xfs_dir_ci_inode_operations = {
+	.create			= xfs_vn_create,
+	.lookup			= xfs_vn_ci_lookup,
+	.link			= xfs_vn_link,
+	.unlink			= xfs_vn_unlink,
+	.symlink		= xfs_vn_symlink,
+	.mkdir			= xfs_vn_mkdir,
+	/*
+	 * Yes, XFS uses the same method for rmdir and unlink.
+	 *
+	 * There are some subtile differences deeper in the code,
+	 * but we use S_ISDIR to check for those.
+	 */
+	.rmdir			= xfs_vn_unlink,
+	.mknod			= xfs_vn_mknod,
+	.rename			= xfs_vn_rename,
+	.permission		= xfs_vn_permission,
+	.getattr		= xfs_vn_getattr,
+	.setattr		= xfs_vn_setattr,
+	.setxattr		= generic_setxattr,
+	.getxattr		= generic_getxattr,
+	.removexattr		= generic_removexattr,
+	.listxattr		= xfs_vn_listxattr,
+};
+
+static const struct inode_operations xfs_symlink_inode_operations = {
 	.readlink		= generic_readlink,
 	.follow_link		= xfs_vn_follow_link,
 	.put_link		= xfs_vn_put_link,
 	.permission		= xfs_vn_permission,
 	.getattr		= xfs_vn_getattr,
 	.setattr		= xfs_vn_setattr,
-	.setxattr		= xfs_vn_setxattr,
-	.getxattr		= xfs_vn_getxattr,
+	.setxattr		= generic_setxattr,
+	.getxattr		= generic_getxattr,
+	.removexattr		= generic_removexattr,
 	.listxattr		= xfs_vn_listxattr,
-	.removexattr		= xfs_vn_removexattr,
 };
+
+STATIC void
+xfs_diflags_to_iflags(
+	struct inode		*inode,
+	struct xfs_inode	*ip)
+{
+	if (ip->i_d.di_flags & XFS_DIFLAG_IMMUTABLE)
+		inode->i_flags |= S_IMMUTABLE;
+	else
+		inode->i_flags &= ~S_IMMUTABLE;
+	if (ip->i_d.di_flags & XFS_DIFLAG_APPEND)
+		inode->i_flags |= S_APPEND;
+	else
+		inode->i_flags &= ~S_APPEND;
+	if (ip->i_d.di_flags & XFS_DIFLAG_SYNC)
+		inode->i_flags |= S_SYNC;
+	else
+		inode->i_flags &= ~S_SYNC;
+	if (ip->i_d.di_flags & XFS_DIFLAG_NOATIME)
+		inode->i_flags |= S_NOATIME;
+	else
+		inode->i_flags &= ~S_NOATIME;
+}
+
+/*
+ * Initialize the Linux inode, set up the operation vectors and
+ * unlock the inode.
+ *
+ * When reading existing inodes from disk this is called directly
+ * from xfs_iget, when creating a new inode it is called from
+ * xfs_ialloc after setting up the inode.
+ */
+void
+xfs_setup_inode(
+	struct xfs_inode	*ip)
+{
+	struct inode		*inode = ip->i_vnode;
+
+	inode->i_mode	= ip->i_d.di_mode;
+	inode->i_nlink	= ip->i_d.di_nlink;
+	inode->i_uid	= ip->i_d.di_uid;
+	inode->i_gid	= ip->i_d.di_gid;
+
+	switch (inode->i_mode & S_IFMT) {
+	case S_IFBLK:
+	case S_IFCHR:
+		inode->i_rdev =
+			MKDEV(sysv_major(ip->i_df.if_u2.if_rdev) & 0x1ff,
+			      sysv_minor(ip->i_df.if_u2.if_rdev));
+		break;
+	default:
+		inode->i_rdev = 0;
+		break;
+	}
+
+	inode->i_generation = ip->i_d.di_gen;
+	i_size_write(inode, ip->i_d.di_size);
+	inode->i_atime.tv_sec	= ip->i_d.di_atime.t_sec;
+	inode->i_atime.tv_nsec	= ip->i_d.di_atime.t_nsec;
+	inode->i_mtime.tv_sec	= ip->i_d.di_mtime.t_sec;
+	inode->i_mtime.tv_nsec	= ip->i_d.di_mtime.t_nsec;
+	inode->i_ctime.tv_sec	= ip->i_d.di_ctime.t_sec;
+	inode->i_ctime.tv_nsec	= ip->i_d.di_ctime.t_nsec;
+	xfs_diflags_to_iflags(inode, ip);
+	xfs_iflags_clear(ip, XFS_IMODIFIED);
+
+	switch (inode->i_mode & S_IFMT) {
+	case S_IFREG:
+		inode->i_op = &xfs_inode_operations;
+		inode->i_fop = &xfs_file_operations;
+		inode->i_mapping->a_ops = &xfs_address_space_operations;
+		break;
+	case S_IFDIR:
+		if (xfs_sb_version_hasasciici(&XFS_M(inode->i_sb)->m_sb))
+			inode->i_op = &xfs_dir_ci_inode_operations;
+		else
+			inode->i_op = &xfs_dir_inode_operations;
+		inode->i_fop = &xfs_dir_file_operations;
+		break;
+	case S_IFLNK:
+		inode->i_op = &xfs_symlink_inode_operations;
+		if (!(ip->i_df.if_flags & XFS_IFINLINE))
+			inode->i_mapping->a_ops = &xfs_address_space_operations;
+		break;
+	default:
+		inode->i_op = &xfs_inode_operations;
+		init_special_inode(inode, inode->i_mode, inode->i_rdev);
+		break;
+	}
+
+	xfs_iflags_clear(ip, XFS_INEW);
+	barrier();
+
+	unlock_new_inode(inode);
+}
diff --git a/fs/xfs/linux-2.6/xfs_iops.h b/fs/xfs/linux-2.6/xfs_iops.h
index 14d0deb7afff..8b1a1e31dc21 100644
--- a/fs/xfs/linux-2.6/xfs_iops.h
+++ b/fs/xfs/linux-2.6/xfs_iops.h
@@ -18,23 +18,14 @@
 #ifndef __XFS_IOPS_H__
 #define __XFS_IOPS_H__
 
-extern const struct inode_operations xfs_inode_operations;
-extern const struct inode_operations xfs_dir_inode_operations;
-extern const struct inode_operations xfs_symlink_inode_operations;
+struct xfs_inode;
 
 extern const struct file_operations xfs_file_operations;
 extern const struct file_operations xfs_dir_file_operations;
 extern const struct file_operations xfs_invis_file_operations;
 
+extern ssize_t xfs_vn_listxattr(struct dentry *, char *data, size_t size);
 
-struct xfs_inode;
-extern void xfs_ichgtime(struct xfs_inode *, int);
-extern void xfs_ichgtime_fast(struct xfs_inode *, struct inode *, int);
-
-#define xfs_vtoi(vp) \
-	((struct xfs_inode *)vn_to_inode(vp)->i_private)
-
-#define XFS_I(inode) \
-	((struct xfs_inode *)(inode)->i_private)
+extern void xfs_setup_inode(struct xfs_inode *);
 
 #endif /* __XFS_IOPS_H__ */
diff --git a/fs/xfs/linux-2.6/xfs_linux.h b/fs/xfs/linux-2.6/xfs_linux.h
index 4edc46915b57..cc0f7b3a9795 100644
--- a/fs/xfs/linux-2.6/xfs_linux.h
+++ b/fs/xfs/linux-2.6/xfs_linux.h
@@ -45,13 +45,13 @@
 #include <mrlock.h>
 #include <sv.h>
 #include <mutex.h>
-#include <sema.h>
 #include <time.h>
 
 #include <support/ktrace.h>
 #include <support/debug.h>
 #include <support/uuid.h>
 
+#include <linux/semaphore.h>
 #include <linux/mm.h>
 #include <linux/kernel.h>
 #include <linux/blkdev.h>
@@ -76,6 +76,7 @@
 #include <linux/log2.h>
 #include <linux/spinlock.h>
 #include <linux/random.h>
+#include <linux/ctype.h>
 
 #include <asm/page.h>
 #include <asm/div64.h>
@@ -125,8 +126,6 @@
 
 #define current_cpu()		(raw_smp_processor_id())
 #define current_pid()		(current->pid)
-#define current_fsuid(cred)	(current->fsuid)
-#define current_fsgid(cred)	(current->fsgid)
 #define current_test_flags(f)	(current->flags & (f))
 #define current_set_flags_nested(sp, f)		\
 		(*(sp) = current->flags, current->flags |= (f))
@@ -179,7 +178,7 @@
 #define xfs_sort(a,n,s,fn)	sort(a,n,s,fn,NULL)
 #define xfs_stack_trace()	dump_stack()
 #define xfs_itruncate_data(ip, off)	\
-	(-vmtruncate(vn_to_inode(XFS_ITOV(ip)), (off)))
+	(-vmtruncate(VFS_I(ip), (off)))
 
 
 /* Move the kernel do_div definition off to one side */
@@ -299,4 +298,11 @@ static inline __uint64_t howmany_64(__uint64_t x, __uint32_t y)
 	return x;
 }
 
+/* ARM old ABI has some weird alignment/padding */
+#if defined(__arm__) && !defined(__ARM_EABI__)
+#define __arch_pack __attribute__((packed))
+#else
+#define __arch_pack
+#endif
+
 #endif /* __XFS_LINUX__ */
diff --git a/fs/xfs/linux-2.6/xfs_lrw.c b/fs/xfs/linux-2.6/xfs_lrw.c
index 5e3b57516ec7..1957e5357d04 100644
--- a/fs/xfs/linux-2.6/xfs_lrw.c
+++ b/fs/xfs/linux-2.6/xfs_lrw.c
@@ -137,7 +137,7 @@ xfs_iozero(
 	struct address_space	*mapping;
 	int			status;
 
-	mapping = ip->i_vnode->i_mapping;
+	mapping = VFS_I(ip)->i_mapping;
 	do {
 		unsigned offset, bytes;
 		void *fsdata;
@@ -674,9 +674,7 @@ start:
 	 */
 	if (likely(!(ioflags & IO_INVIS) &&
 		   !mnt_want_write(file->f_path.mnt))) {
-		file_update_time(file);
-		xfs_ichgtime_fast(xip, inode,
-				  XFS_ICHGTIME_MOD | XFS_ICHGTIME_CHG);
+		xfs_ichgtime(xip, XFS_ICHGTIME_MOD | XFS_ICHGTIME_CHG);
 		mnt_drop_write(file->f_path.mnt);
 	}
 
@@ -711,7 +709,7 @@ start:
 	     !capable(CAP_FSETID)) {
 		error = xfs_write_clear_setuid(xip);
 		if (likely(!error))
-			error = -remove_suid(file->f_path.dentry);
+			error = -file_remove_suid(file);
 		if (unlikely(error)) {
 			goto out_unlock_internal;
 		}
diff --git a/fs/xfs/linux-2.6/xfs_stats.c b/fs/xfs/linux-2.6/xfs_stats.c
index e480b6102051..3d5b67c075c7 100644
--- a/fs/xfs/linux-2.6/xfs_stats.c
+++ b/fs/xfs/linux-2.6/xfs_stats.c
@@ -98,12 +98,21 @@ xfs_read_xfsstats(
 	return len;
 }
 
-void
+int
 xfs_init_procfs(void)
 {
 	if (!proc_mkdir("fs/xfs", NULL))
-		return;
-	create_proc_read_entry("fs/xfs/stat", 0, NULL, xfs_read_xfsstats, NULL);
+		goto out;
+
+	if (!create_proc_read_entry("fs/xfs/stat", 0, NULL,
+			xfs_read_xfsstats, NULL))
+		goto out_remove_entry;
+	return 0;
+
+ out_remove_entry:
+	remove_proc_entry("fs/xfs", NULL);
+ out:
+	return -ENOMEM;
 }
 
 void
diff --git a/fs/xfs/linux-2.6/xfs_stats.h b/fs/xfs/linux-2.6/xfs_stats.h
index afd0b0d5fdb2..e83820febc9f 100644
--- a/fs/xfs/linux-2.6/xfs_stats.h
+++ b/fs/xfs/linux-2.6/xfs_stats.h
@@ -134,7 +134,7 @@ DECLARE_PER_CPU(struct xfsstats, xfsstats);
 #define XFS_STATS_DEC(v)	(per_cpu(xfsstats, current_cpu()).v--)
 #define XFS_STATS_ADD(v, inc)	(per_cpu(xfsstats, current_cpu()).v += (inc))
 
-extern void xfs_init_procfs(void);
+extern int xfs_init_procfs(void);
 extern void xfs_cleanup_procfs(void);
 
 
@@ -144,8 +144,14 @@ extern void xfs_cleanup_procfs(void);
 # define XFS_STATS_DEC(count)
 # define XFS_STATS_ADD(count, inc)
 
-static inline void xfs_init_procfs(void) { };
-static inline void xfs_cleanup_procfs(void) { };
+static inline int xfs_init_procfs(void)
+{
+	return 0;
+}
+
+static inline void xfs_cleanup_procfs(void)
+{
+}
 
 #endif	/* !CONFIG_PROC_FS */
 
diff --git a/fs/xfs/linux-2.6/xfs_super.c b/fs/xfs/linux-2.6/xfs_super.c
index 742b2c7852c1..73c65f19e549 100644
--- a/fs/xfs/linux-2.6/xfs_super.c
+++ b/fs/xfs/linux-2.6/xfs_super.c
@@ -52,6 +52,12 @@
 #include "xfs_version.h"
 #include "xfs_log_priv.h"
 #include "xfs_trans_priv.h"
+#include "xfs_filestream.h"
+#include "xfs_da_btree.h"
+#include "xfs_dir2_trace.h"
+#include "xfs_extfree_item.h"
+#include "xfs_mru_cache.h"
+#include "xfs_inode_item.h"
 
 #include <linux/namei.h>
 #include <linux/init.h>
@@ -60,6 +66,7 @@
 #include <linux/writeback.h>
 #include <linux/kthread.h>
 #include <linux/freezer.h>
+#include <linux/parser.h>
 
 static struct quotactl_ops xfs_quotactl_operations;
 static struct super_operations xfs_super_operations;
@@ -74,7 +81,10 @@ xfs_args_allocate(
 {
 	struct xfs_mount_args	*args;
 
-	args = kmem_zalloc(sizeof(struct xfs_mount_args), KM_SLEEP);
+	args = kzalloc(sizeof(struct xfs_mount_args), GFP_KERNEL);
+	if (!args)
+		return NULL;
+
 	args->logbufs = args->logbufsize = -1;
 	strncpy(args->fsname, sb->s_id, MAXNAMELEN);
 
@@ -138,6 +148,23 @@ xfs_args_allocate(
 #define MNTOPT_XDSM	"xdsm"		/* DMI enabled (DMAPI / XDSM) */
 #define MNTOPT_DMI	"dmi"		/* DMI enabled (DMAPI / XDSM) */
 
+/*
+ * Table driven mount option parser.
+ *
+ * Currently only used for remount, but it will be used for mount
+ * in the future, too.
+ */
+enum {
+	Opt_barrier, Opt_nobarrier, Opt_err
+};
+
+static match_table_t tokens = {
+	{Opt_barrier, "barrier"},
+	{Opt_nobarrier, "nobarrier"},
+	{Opt_err, NULL}
+};
+
+
 STATIC unsigned long
 suffix_strtoul(char *s, char **endp, unsigned int base)
 {
@@ -314,6 +341,7 @@ xfs_parseargs(
 			args->flags |= XFSMNT_ATTR2;
 		} else if (!strcmp(this_char, MNTOPT_NOATTR2)) {
 			args->flags &= ~XFSMNT_ATTR2;
+			args->flags |= XFSMNT_NOATTR2;
 		} else if (!strcmp(this_char, MNTOPT_FILESTREAM)) {
 			args->flags2 |= XFSMNT2_FILESTREAMS;
 		} else if (!strcmp(this_char, MNTOPT_NOQUOTA)) {
@@ -553,115 +581,6 @@ xfs_max_file_offset(
 	return (((__uint64_t)pagefactor) << bitshift) - 1;
 }
 
-STATIC_INLINE void
-xfs_set_inodeops(
-	struct inode		*inode)
-{
-	switch (inode->i_mode & S_IFMT) {
-	case S_IFREG:
-		inode->i_op = &xfs_inode_operations;
-		inode->i_fop = &xfs_file_operations;
-		inode->i_mapping->a_ops = &xfs_address_space_operations;
-		break;
-	case S_IFDIR:
-		inode->i_op = &xfs_dir_inode_operations;
-		inode->i_fop = &xfs_dir_file_operations;
-		break;
-	case S_IFLNK:
-		inode->i_op = &xfs_symlink_inode_operations;
-		if (!(XFS_I(inode)->i_df.if_flags & XFS_IFINLINE))
-			inode->i_mapping->a_ops = &xfs_address_space_operations;
-		break;
-	default:
-		inode->i_op = &xfs_inode_operations;
-		init_special_inode(inode, inode->i_mode, inode->i_rdev);
-		break;
-	}
-}
-
-STATIC_INLINE void
-xfs_revalidate_inode(
-	xfs_mount_t		*mp,
-	bhv_vnode_t		*vp,
-	xfs_inode_t		*ip)
-{
-	struct inode		*inode = vn_to_inode(vp);
-
-	inode->i_mode	= ip->i_d.di_mode;
-	inode->i_nlink	= ip->i_d.di_nlink;
-	inode->i_uid	= ip->i_d.di_uid;
-	inode->i_gid	= ip->i_d.di_gid;
-
-	switch (inode->i_mode & S_IFMT) {
-	case S_IFBLK:
-	case S_IFCHR:
-		inode->i_rdev =
-			MKDEV(sysv_major(ip->i_df.if_u2.if_rdev) & 0x1ff,
-			      sysv_minor(ip->i_df.if_u2.if_rdev));
-		break;
-	default:
-		inode->i_rdev = 0;
-		break;
-	}
-
-	inode->i_generation = ip->i_d.di_gen;
-	i_size_write(inode, ip->i_d.di_size);
-	inode->i_atime.tv_sec	= ip->i_d.di_atime.t_sec;
-	inode->i_atime.tv_nsec	= ip->i_d.di_atime.t_nsec;
-	inode->i_mtime.tv_sec	= ip->i_d.di_mtime.t_sec;
-	inode->i_mtime.tv_nsec	= ip->i_d.di_mtime.t_nsec;
-	inode->i_ctime.tv_sec	= ip->i_d.di_ctime.t_sec;
-	inode->i_ctime.tv_nsec	= ip->i_d.di_ctime.t_nsec;
-	if (ip->i_d.di_flags & XFS_DIFLAG_IMMUTABLE)
-		inode->i_flags |= S_IMMUTABLE;
-	else
-		inode->i_flags &= ~S_IMMUTABLE;
-	if (ip->i_d.di_flags & XFS_DIFLAG_APPEND)
-		inode->i_flags |= S_APPEND;
-	else
-		inode->i_flags &= ~S_APPEND;
-	if (ip->i_d.di_flags & XFS_DIFLAG_SYNC)
-		inode->i_flags |= S_SYNC;
-	else
-		inode->i_flags &= ~S_SYNC;
-	if (ip->i_d.di_flags & XFS_DIFLAG_NOATIME)
-		inode->i_flags |= S_NOATIME;
-	else
-		inode->i_flags &= ~S_NOATIME;
-	xfs_iflags_clear(ip, XFS_IMODIFIED);
-}
-
-void
-xfs_initialize_vnode(
-	struct xfs_mount	*mp,
-	bhv_vnode_t		*vp,
-	struct xfs_inode	*ip)
-{
-	struct inode		*inode = vn_to_inode(vp);
-
-	if (!ip->i_vnode) {
-		ip->i_vnode = vp;
-		inode->i_private = ip;
-	}
-
-	/*
-	 * We need to set the ops vectors, and unlock the inode, but if
-	 * we have been called during the new inode create process, it is
-	 * too early to fill in the Linux inode.  We will get called a
-	 * second time once the inode is properly set up, and then we can
-	 * finish our work.
-	 */
-	if (ip->i_d.di_mode != 0 && (inode->i_state & I_NEW)) {
-		xfs_revalidate_inode(mp, vp, ip);
-		xfs_set_inodeops(inode);
-
-		xfs_iflags_clear(ip, XFS_INEW);
-		barrier();
-
-		unlock_new_inode(inode);
-	}
-}
-
 int
 xfs_blkdev_get(
 	xfs_mount_t		*mp,
@@ -733,14 +652,6 @@ xfs_mountfs_check_barriers(xfs_mount_t *mp)
 		return;
 	}
 
-	if (mp->m_ddev_targp->bt_bdev->bd_disk->queue->ordered ==
-					QUEUE_ORDERED_NONE) {
-		xfs_fs_cmn_err(CE_NOTE, mp,
-		  "Disabling barriers, not supported by the underlying device");
-		mp->m_flags &= ~XFS_MOUNT_BARRIER;
-		return;
-	}
-
 	if (xfs_readonly_buftarg(mp->m_ddev_targp)) {
 		xfs_fs_cmn_err(CE_NOTE, mp,
 		  "Disabling barriers, underlying device is readonly");
@@ -764,6 +675,139 @@ xfs_blkdev_issue_flush(
 	blkdev_issue_flush(buftarg->bt_bdev, NULL);
 }
 
+STATIC void
+xfs_close_devices(
+	struct xfs_mount	*mp)
+{
+	if (mp->m_logdev_targp && mp->m_logdev_targp != mp->m_ddev_targp) {
+		struct block_device *logdev = mp->m_logdev_targp->bt_bdev;
+		xfs_free_buftarg(mp->m_logdev_targp);
+		xfs_blkdev_put(logdev);
+	}
+	if (mp->m_rtdev_targp) {
+		struct block_device *rtdev = mp->m_rtdev_targp->bt_bdev;
+		xfs_free_buftarg(mp->m_rtdev_targp);
+		xfs_blkdev_put(rtdev);
+	}
+	xfs_free_buftarg(mp->m_ddev_targp);
+}
+
+/*
+ * The file system configurations are:
+ *	(1) device (partition) with data and internal log
+ *	(2) logical volume with data and log subvolumes.
+ *	(3) logical volume with data, log, and realtime subvolumes.
+ *
+ * We only have to handle opening the log and realtime volumes here if
+ * they are present.  The data subvolume has already been opened by
+ * get_sb_bdev() and is stored in sb->s_bdev.
+ */
+STATIC int
+xfs_open_devices(
+	struct xfs_mount	*mp,
+	struct xfs_mount_args	*args)
+{
+	struct block_device	*ddev = mp->m_super->s_bdev;
+	struct block_device	*logdev = NULL, *rtdev = NULL;
+	int			error;
+
+	/*
+	 * Open real time and log devices - order is important.
+	 */
+	if (args->logname[0]) {
+		error = xfs_blkdev_get(mp, args->logname, &logdev);
+		if (error)
+			goto out;
+	}
+
+	if (args->rtname[0]) {
+		error = xfs_blkdev_get(mp, args->rtname, &rtdev);
+		if (error)
+			goto out_close_logdev;
+
+		if (rtdev == ddev || rtdev == logdev) {
+			cmn_err(CE_WARN,
+	"XFS: Cannot mount filesystem with identical rtdev and ddev/logdev.");
+			error = EINVAL;
+			goto out_close_rtdev;
+		}
+	}
+
+	/*
+	 * Setup xfs_mount buffer target pointers
+	 */
+	error = ENOMEM;
+	mp->m_ddev_targp = xfs_alloc_buftarg(ddev, 0);
+	if (!mp->m_ddev_targp)
+		goto out_close_rtdev;
+
+	if (rtdev) {
+		mp->m_rtdev_targp = xfs_alloc_buftarg(rtdev, 1);
+		if (!mp->m_rtdev_targp)
+			goto out_free_ddev_targ;
+	}
+
+	if (logdev && logdev != ddev) {
+		mp->m_logdev_targp = xfs_alloc_buftarg(logdev, 1);
+		if (!mp->m_logdev_targp)
+			goto out_free_rtdev_targ;
+	} else {
+		mp->m_logdev_targp = mp->m_ddev_targp;
+	}
+
+	return 0;
+
+ out_free_rtdev_targ:
+	if (mp->m_rtdev_targp)
+		xfs_free_buftarg(mp->m_rtdev_targp);
+ out_free_ddev_targ:
+	xfs_free_buftarg(mp->m_ddev_targp);
+ out_close_rtdev:
+	if (rtdev)
+		xfs_blkdev_put(rtdev);
+ out_close_logdev:
+	if (logdev && logdev != ddev)
+		xfs_blkdev_put(logdev);
+ out:
+	return error;
+}
+
+/*
+ * Setup xfs_mount buffer target pointers based on superblock
+ */
+STATIC int
+xfs_setup_devices(
+	struct xfs_mount	*mp)
+{
+	int			error;
+
+	error = xfs_setsize_buftarg(mp->m_ddev_targp, mp->m_sb.sb_blocksize,
+				    mp->m_sb.sb_sectsize);
+	if (error)
+		return error;
+
+	if (mp->m_logdev_targp && mp->m_logdev_targp != mp->m_ddev_targp) {
+		unsigned int	log_sector_size = BBSIZE;
+
+		if (xfs_sb_version_hassector(&mp->m_sb))
+			log_sector_size = mp->m_sb.sb_logsectsize;
+		error = xfs_setsize_buftarg(mp->m_logdev_targp,
+					    mp->m_sb.sb_blocksize,
+					    log_sector_size);
+		if (error)
+			return error;
+	}
+	if (mp->m_rtdev_targp) {
+		error = xfs_setsize_buftarg(mp->m_rtdev_targp,
+					    mp->m_sb.sb_blocksize,
+					    mp->m_sb.sb_sectsize);
+		if (error)
+			return error;
+	}
+
+	return 0;
+}
+
 /*
  * XFS AIL push thread support
  */
@@ -826,63 +870,21 @@ STATIC struct inode *
 xfs_fs_alloc_inode(
 	struct super_block	*sb)
 {
-	bhv_vnode_t		*vp;
-
-	vp = kmem_zone_alloc(xfs_vnode_zone, KM_SLEEP);
-	if (unlikely(!vp))
-		return NULL;
-	return vn_to_inode(vp);
+	return kmem_zone_alloc(xfs_vnode_zone, KM_SLEEP);
 }
 
 STATIC void
 xfs_fs_destroy_inode(
 	struct inode		*inode)
 {
-	kmem_zone_free(xfs_vnode_zone, vn_from_inode(inode));
+	kmem_zone_free(xfs_vnode_zone, inode);
 }
 
 STATIC void
 xfs_fs_inode_init_once(
-	kmem_zone_t		*zonep,
 	void			*vnode)
 {
-	inode_init_once(vn_to_inode((bhv_vnode_t *)vnode));
-}
-
-STATIC int __init
-xfs_init_zones(void)
-{
-	xfs_vnode_zone = kmem_zone_init_flags(sizeof(bhv_vnode_t), "xfs_vnode",
-					KM_ZONE_HWALIGN | KM_ZONE_RECLAIM |
-					KM_ZONE_SPREAD,
-					xfs_fs_inode_init_once);
-	if (!xfs_vnode_zone)
-		goto out;
-
-	xfs_ioend_zone = kmem_zone_init(sizeof(xfs_ioend_t), "xfs_ioend");
-	if (!xfs_ioend_zone)
-		goto out_destroy_vnode_zone;
-
-	xfs_ioend_pool = mempool_create_slab_pool(4 * MAX_BUF_PER_PAGE,
-						  xfs_ioend_zone);
-	if (!xfs_ioend_pool)
-		goto out_free_ioend_zone;
-	return 0;
-
- out_free_ioend_zone:
-	kmem_zone_destroy(xfs_ioend_zone);
- out_destroy_vnode_zone:
-	kmem_zone_destroy(xfs_vnode_zone);
- out:
-	return -ENOMEM;
-}
-
-STATIC void
-xfs_destroy_zones(void)
-{
-	mempool_destroy(xfs_ioend_pool);
-	kmem_zone_destroy(xfs_vnode_zone);
-	kmem_zone_destroy(xfs_ioend_zone);
+	inode_init_once((struct inode *)vnode);
 }
 
 /*
@@ -987,7 +989,7 @@ void
 xfs_flush_inode(
 	xfs_inode_t	*ip)
 {
-	struct inode	*inode = ip->i_vnode;
+	struct inode	*inode = VFS_I(ip);
 
 	igrab(inode);
 	xfs_syncd_queue_work(ip->i_mount, inode, xfs_flush_inode_work);
@@ -1012,7 +1014,7 @@ void
 xfs_flush_device(
 	xfs_inode_t	*ip)
 {
-	struct inode	*inode = vn_to_inode(XFS_ITOV(ip));
+	struct inode	*inode = VFS_I(ip);
 
 	igrab(inode);
 	xfs_syncd_queue_work(ip->i_mount, inode, xfs_flush_device_work);
@@ -1074,7 +1076,7 @@ xfssyncd(
 			list_del(&work->w_list);
 			if (work == &mp->m_sync_work)
 				continue;
-			kmem_free(work, sizeof(struct bhv_vfs_sync_work));
+			kmem_free(work);
 		}
 	}
 
@@ -1082,18 +1084,76 @@ xfssyncd(
 }
 
 STATIC void
+xfs_free_fsname(
+	struct xfs_mount	*mp)
+{
+	kfree(mp->m_fsname);
+	kfree(mp->m_rtname);
+	kfree(mp->m_logname);
+}
+
+STATIC void
 xfs_fs_put_super(
 	struct super_block	*sb)
 {
 	struct xfs_mount	*mp = XFS_M(sb);
+	struct xfs_inode	*rip = mp->m_rootip;
+	int			unmount_event_flags = 0;
 	int			error;
 
 	kthread_stop(mp->m_sync_task);
 
 	xfs_sync(mp, SYNC_ATTR | SYNC_DELWRI);
-	error = xfs_unmount(mp, 0, NULL);
-	if (error)
-		printk("XFS: unmount got error=%d\n", error);
+
+#ifdef HAVE_DMAPI
+	if (mp->m_flags & XFS_MOUNT_DMAPI) {
+		unmount_event_flags =
+			(mp->m_dmevmask & (1 << DM_EVENT_UNMOUNT)) ?
+				0 : DM_FLAGS_UNWANTED;
+		/*
+		 * Ignore error from dmapi here, first unmount is not allowed
+		 * to fail anyway, and second we wouldn't want to fail a
+		 * unmount because of dmapi.
+		 */
+		XFS_SEND_PREUNMOUNT(mp, rip, DM_RIGHT_NULL, rip, DM_RIGHT_NULL,
+				NULL, NULL, 0, 0, unmount_event_flags);
+	}
+#endif
+
+	/*
+	 * Blow away any referenced inode in the filestreams cache.
+	 * This can and will cause log traffic as inodes go inactive
+	 * here.
+	 */
+	xfs_filestream_unmount(mp);
+
+	XFS_bflush(mp->m_ddev_targp);
+	error = xfs_unmount_flush(mp, 0);
+	WARN_ON(error);
+
+	/*
+	 * If we're forcing a shutdown, typically because of a media error,
+	 * we want to make sure we invalidate dirty pages that belong to
+	 * referenced vnodes as well.
+	 */
+	if (XFS_FORCED_SHUTDOWN(mp)) {
+		error = xfs_sync(mp, SYNC_WAIT | SYNC_CLOSE);
+		ASSERT(error != EFSCORRUPTED);
+	}
+
+	if (mp->m_flags & XFS_MOUNT_DMAPI) {
+		XFS_SEND_UNMOUNT(mp, rip, DM_RIGHT_NULL, 0, 0,
+				unmount_event_flags);
+	}
+
+	xfs_unmountfs(mp);
+	xfs_freesb(mp);
+	xfs_icsb_destroy_counters(mp);
+	xfs_close_devices(mp);
+	xfs_qmops_put(mp);
+	xfs_dmops_put(mp);
+	xfs_free_fsname(mp);
+	kfree(mp);
 }
 
 STATIC void
@@ -1216,14 +1276,54 @@ xfs_fs_remount(
 	char			*options)
 {
 	struct xfs_mount	*mp = XFS_M(sb);
-	struct xfs_mount_args	*args = xfs_args_allocate(sb, 0);
-	int			error;
+	substring_t		args[MAX_OPT_ARGS];
+	char			*p;
 
-	error = xfs_parseargs(mp, options, args, 1);
-	if (!error)
-		error = xfs_mntupdate(mp, flags, args);
-	kmem_free(args, sizeof(*args));
-	return -error;
+	while ((p = strsep(&options, ",")) != NULL) {
+		int token;
+
+		if (!*p)
+			continue;
+
+		token = match_token(p, tokens, args);
+		switch (token) {
+		case Opt_barrier:
+			mp->m_flags |= XFS_MOUNT_BARRIER;
+
+			/*
+			 * Test if barriers are actually working if we can,
+			 * else delay this check until the filesystem is
+			 * marked writeable.
+			 */
+			if (!(mp->m_flags & XFS_MOUNT_RDONLY))
+				xfs_mountfs_check_barriers(mp);
+			break;
+		case Opt_nobarrier:
+			mp->m_flags &= ~XFS_MOUNT_BARRIER;
+			break;
+		default:
+			printk(KERN_INFO
+	"XFS: mount option \"%s\" not supported for remount\n", p);
+			return -EINVAL;
+		}
+	}
+
+	/* rw/ro -> rw */
+	if ((mp->m_flags & XFS_MOUNT_RDONLY) && !(*flags & MS_RDONLY)) {
+		mp->m_flags &= ~XFS_MOUNT_RDONLY;
+		if (mp->m_flags & XFS_MOUNT_BARRIER)
+			xfs_mountfs_check_barriers(mp);
+	}
+
+	/* rw -> ro */
+	if (!(mp->m_flags & XFS_MOUNT_RDONLY) && (*flags & MS_RDONLY)) {
+		xfs_filestream_flush(mp);
+		xfs_sync(mp, SYNC_DATA_QUIESCE);
+		xfs_attr_quiesce(mp);
+		mp->m_flags |= XFS_MOUNT_RDONLY;
+	}
+
+	return 0;
 }
 
 /*
@@ -1300,6 +1400,245 @@ xfs_fs_setxquota(
 				   Q_XSETPQLIM), id, (caddr_t)fdq);
 }
 
+/*
+ * This function fills in xfs_mount_t fields based on mount args.
+ * Note: the superblock has _not_ yet been read in.
+ */
+STATIC int
+xfs_start_flags(
+	struct xfs_mount_args	*ap,
+	struct xfs_mount	*mp)
+{
+	int			error;
+
+	/* Values are in BBs */
+	if ((ap->flags & XFSMNT_NOALIGN) != XFSMNT_NOALIGN) {
+		/*
+		 * At this point the superblock has not been read
+		 * in, therefore we do not know the block size.
+		 * Before the mount call ends we will convert
+		 * these to FSBs.
+		 */
+		mp->m_dalign = ap->sunit;
+		mp->m_swidth = ap->swidth;
+	}
+
+	if (ap->logbufs != -1 &&
+	    ap->logbufs != 0 &&
+	    (ap->logbufs < XLOG_MIN_ICLOGS ||
+	     ap->logbufs > XLOG_MAX_ICLOGS)) {
+		cmn_err(CE_WARN,
+			"XFS: invalid logbufs value: %d [not %d-%d]",
+			ap->logbufs, XLOG_MIN_ICLOGS, XLOG_MAX_ICLOGS);
+		return XFS_ERROR(EINVAL);
+	}
+	mp->m_logbufs = ap->logbufs;
+	if (ap->logbufsize != -1 &&
+	    ap->logbufsize !=  0 &&
+	    (ap->logbufsize < XLOG_MIN_RECORD_BSIZE ||
+	     ap->logbufsize > XLOG_MAX_RECORD_BSIZE ||
+	     !is_power_of_2(ap->logbufsize))) {
+		cmn_err(CE_WARN,
+	"XFS: invalid logbufsize: %d [not 16k,32k,64k,128k or 256k]",
+			ap->logbufsize);
+		return XFS_ERROR(EINVAL);
+	}
+
+	error = ENOMEM;
+
+	mp->m_logbsize = ap->logbufsize;
+	mp->m_fsname_len = strlen(ap->fsname) + 1;
+
+	mp->m_fsname = kstrdup(ap->fsname, GFP_KERNEL);
+	if (!mp->m_fsname)
+		goto out;
+
+	if (ap->rtname[0]) {
+		mp->m_rtname = kstrdup(ap->rtname, GFP_KERNEL);
+		if (!mp->m_rtname)
+			goto out_free_fsname;
+
+	}
+
+	if (ap->logname[0]) {
+		mp->m_logname = kstrdup(ap->logname, GFP_KERNEL);
+		if (!mp->m_logname)
+			goto out_free_rtname;
+	}
+
+	if (ap->flags & XFSMNT_WSYNC)
+		mp->m_flags |= XFS_MOUNT_WSYNC;
+#if XFS_BIG_INUMS
+	if (ap->flags & XFSMNT_INO64) {
+		mp->m_flags |= XFS_MOUNT_INO64;
+		mp->m_inoadd = XFS_INO64_OFFSET;
+	}
+#endif
+	if (ap->flags & XFSMNT_RETERR)
+		mp->m_flags |= XFS_MOUNT_RETERR;
+	if (ap->flags & XFSMNT_NOALIGN)
+		mp->m_flags |= XFS_MOUNT_NOALIGN;
+	if (ap->flags & XFSMNT_SWALLOC)
+		mp->m_flags |= XFS_MOUNT_SWALLOC;
+	if (ap->flags & XFSMNT_OSYNCISOSYNC)
+		mp->m_flags |= XFS_MOUNT_OSYNCISOSYNC;
+	if (ap->flags & XFSMNT_32BITINODES)
+		mp->m_flags |= XFS_MOUNT_32BITINODES;
+
+	if (ap->flags & XFSMNT_IOSIZE) {
+		if (ap->iosizelog > XFS_MAX_IO_LOG ||
+		    ap->iosizelog < XFS_MIN_IO_LOG) {
+			cmn_err(CE_WARN,
+		"XFS: invalid log iosize: %d [not %d-%d]",
+				ap->iosizelog, XFS_MIN_IO_LOG,
+				XFS_MAX_IO_LOG);
+			return XFS_ERROR(EINVAL);
+		}
+
+		mp->m_flags |= XFS_MOUNT_DFLT_IOSIZE;
+		mp->m_readio_log = mp->m_writeio_log = ap->iosizelog;
+	}
+
+	if (ap->flags & XFSMNT_IKEEP)
+		mp->m_flags |= XFS_MOUNT_IKEEP;
+	if (ap->flags & XFSMNT_DIRSYNC)
+		mp->m_flags |= XFS_MOUNT_DIRSYNC;
+	if (ap->flags & XFSMNT_ATTR2)
+		mp->m_flags |= XFS_MOUNT_ATTR2;
+	if (ap->flags & XFSMNT_NOATTR2)
+		mp->m_flags |= XFS_MOUNT_NOATTR2;
+
+	if (ap->flags2 & XFSMNT2_COMPAT_IOSIZE)
+		mp->m_flags |= XFS_MOUNT_COMPAT_IOSIZE;
+
+	/*
+	 * no recovery flag requires a read-only mount
+	 */
+	if (ap->flags & XFSMNT_NORECOVERY) {
+		if (!(mp->m_flags & XFS_MOUNT_RDONLY)) {
+			cmn_err(CE_WARN,
+	"XFS: tried to mount a FS read-write without recovery!");
+			return XFS_ERROR(EINVAL);
+		}
+		mp->m_flags |= XFS_MOUNT_NORECOVERY;
+	}
+
+	if (ap->flags & XFSMNT_NOUUID)
+		mp->m_flags |= XFS_MOUNT_NOUUID;
+	if (ap->flags & XFSMNT_BARRIER)
+		mp->m_flags |= XFS_MOUNT_BARRIER;
+	else
+		mp->m_flags &= ~XFS_MOUNT_BARRIER;
+
+	if (ap->flags2 & XFSMNT2_FILESTREAMS)
+		mp->m_flags |= XFS_MOUNT_FILESTREAMS;
+
+	if (ap->flags & XFSMNT_DMAPI)
+		mp->m_flags |= XFS_MOUNT_DMAPI;
+	return 0;
+
+
+ out_free_rtname:
+	kfree(mp->m_rtname);
+ out_free_fsname:
+	kfree(mp->m_fsname);
+ out:
+	return error;
+}
+
+/*
+ * This function fills in xfs_mount_t fields based on mount args.
+ * Note: the superblock _has_ now been read in.
+ */
+STATIC int
+xfs_finish_flags(
+	struct xfs_mount_args	*ap,
+	struct xfs_mount	*mp)
+{
+	int			ronly = (mp->m_flags & XFS_MOUNT_RDONLY);
+
+	/* Fail a mount where the logbuf is smaller then the log stripe */
+	if (xfs_sb_version_haslogv2(&mp->m_sb)) {
+		if ((ap->logbufsize <= 0) &&
+		    (mp->m_sb.sb_logsunit > XLOG_BIG_RECORD_BSIZE)) {
+			mp->m_logbsize = mp->m_sb.sb_logsunit;
+		} else if (ap->logbufsize > 0 &&
+			   ap->logbufsize < mp->m_sb.sb_logsunit) {
+			cmn_err(CE_WARN,
+	"XFS: logbuf size must be greater than or equal to log stripe size");
+			return XFS_ERROR(EINVAL);
+		}
+	} else {
+		/* Fail a mount if the logbuf is larger than 32K */
+		if (ap->logbufsize > XLOG_BIG_RECORD_BSIZE) {
+			cmn_err(CE_WARN,
+	"XFS: logbuf size for version 1 logs must be 16K or 32K");
+			return XFS_ERROR(EINVAL);
+		}
+	}
+
+	/*
+	 * mkfs'ed attr2 will turn on attr2 mount unless explicitly
+	 * told by noattr2 to turn it off
+	 */
+	if (xfs_sb_version_hasattr2(&mp->m_sb) &&
+	    !(ap->flags & XFSMNT_NOATTR2))
+		mp->m_flags |= XFS_MOUNT_ATTR2;
+
+	/*
+	 * prohibit r/w mounts of read-only filesystems
+	 */
+	if ((mp->m_sb.sb_flags & XFS_SBF_READONLY) && !ronly) {
+		cmn_err(CE_WARN,
+	"XFS: cannot mount a read-only filesystem as read-write");
+		return XFS_ERROR(EROFS);
+	}
+
+	/*
+	 * check for shared mount.
+	 */
+	if (ap->flags & XFSMNT_SHARED) {
+		if (!xfs_sb_version_hasshared(&mp->m_sb))
+			return XFS_ERROR(EINVAL);
+
+		/*
+		 * For IRIX 6.5, shared mounts must have the shared
+		 * version bit set, have the persistent readonly
+		 * field set, must be version 0 and can only be mounted
+		 * read-only.
+		 */
+		if (!ronly || !(mp->m_sb.sb_flags & XFS_SBF_READONLY) ||
+		     (mp->m_sb.sb_shared_vn != 0))
+			return XFS_ERROR(EINVAL);
+
+		mp->m_flags |= XFS_MOUNT_SHARED;
+
+		/*
+		 * Shared XFS V0 can't deal with DMI.  Return EINVAL.
+		 */
+		if (mp->m_sb.sb_shared_vn == 0 && (ap->flags & XFSMNT_DMAPI))
+			return XFS_ERROR(EINVAL);
+	}
+
+	if (ap->flags & XFSMNT_UQUOTA) {
+		mp->m_qflags |= (XFS_UQUOTA_ACCT | XFS_UQUOTA_ACTIVE);
+		if (ap->flags & XFSMNT_UQUOTAENF)
+			mp->m_qflags |= XFS_UQUOTA_ENFD;
+	}
+
+	if (ap->flags & XFSMNT_GQUOTA) {
+		mp->m_qflags |= (XFS_GQUOTA_ACCT | XFS_GQUOTA_ACTIVE);
+		if (ap->flags & XFSMNT_GQUOTAENF)
+			mp->m_qflags |= XFS_OQUOTA_ENFD;
+	} else if (ap->flags & XFSMNT_PQUOTA) {
+		mp->m_qflags |= (XFS_PQUOTA_ACCT | XFS_PQUOTA_ACTIVE);
+		if (ap->flags & XFSMNT_PQUOTAENF)
+			mp->m_qflags |= XFS_OQUOTA_ENFD;
+	}
+
+	return 0;
+}
+
 STATIC int
 xfs_fs_fill_super(
 	struct super_block	*sb,
@@ -1308,11 +1647,21 @@ xfs_fs_fill_super(
 {
 	struct inode		*root;
 	struct xfs_mount	*mp = NULL;
-	struct xfs_mount_args	*args = xfs_args_allocate(sb, silent);
-	int			error;
+	struct xfs_mount_args	*args;
+	int			flags = 0, error = ENOMEM;
 
-	mp = xfs_mount_init();
+	args = xfs_args_allocate(sb, silent);
+	if (!args)
+		return -ENOMEM;
 
+	mp = kzalloc(sizeof(struct xfs_mount), GFP_KERNEL);
+	if (!mp)
+		goto out_free_args;
+
+	spin_lock_init(&mp->m_sb_lock);
+	mutex_init(&mp->m_ilock);
+	mutex_init(&mp->m_growlock);
+	atomic_set(&mp->m_active_trans, 0);
 	INIT_LIST_HEAD(&mp->m_sync_list);
 	spin_lock_init(&mp->m_sync_lock);
 	init_waitqueue_head(&mp->m_wait_single_sync_task);
@@ -1325,16 +1674,60 @@ xfs_fs_fill_super(
 
 	error = xfs_parseargs(mp, (char *)data, args, 0);
 	if (error)
-		goto fail_vfsop;
+		goto out_free_mp;
 
 	sb_min_blocksize(sb, BBSIZE);
+	sb->s_xattr = xfs_xattr_handlers;
 	sb->s_export_op = &xfs_export_operations;
 	sb->s_qcop = &xfs_quotactl_operations;
 	sb->s_op = &xfs_super_operations;
 
-	error = xfs_mount(mp, args, NULL);
+	error = xfs_dmops_get(mp, args);
+	if (error)
+		goto out_free_mp;
+	error = xfs_qmops_get(mp, args);
+	if (error)
+		goto out_put_dmops;
+
+	if (args->flags & XFSMNT_QUIET)
+		flags |= XFS_MFSI_QUIET;
+
+	error = xfs_open_devices(mp, args);
+	if (error)
+		goto out_put_qmops;
+
+	if (xfs_icsb_init_counters(mp))
+		mp->m_flags |= XFS_MOUNT_NO_PERCPU_SB;
+
+	/*
+	 * Setup flags based on mount(2) options and then the superblock
+	 */
+	error = xfs_start_flags(args, mp);
+	if (error)
+		goto out_free_fsname;
+	error = xfs_readsb(mp, flags);
+	if (error)
+		goto out_free_fsname;
+	error = xfs_finish_flags(args, mp);
 	if (error)
-		goto fail_vfsop;
+		goto out_free_sb;
+
+	error = xfs_setup_devices(mp);
+	if (error)
+		goto out_free_sb;
+
+	if (mp->m_flags & XFS_MOUNT_BARRIER)
+		xfs_mountfs_check_barriers(mp);
+
+	error = xfs_filestream_mount(mp);
+	if (error)
+		goto out_free_sb;
+
+	error = xfs_mountfs(mp);
+	if (error)
+		goto out_filestream_unmount;
+
+	XFS_SEND_MOUNT(mp, DM_RIGHT_NULL, args->mtpt, args->fsname);
 
 	sb->s_dirt = 1;
 	sb->s_magic = XFS_SB_MAGIC;
@@ -1344,7 +1737,7 @@ xfs_fs_fill_super(
 	sb->s_time_gran = 1;
 	set_posix_acl_flag(sb);
 
-	root = igrab(mp->m_rootip->i_vnode);
+	root = igrab(VFS_I(mp->m_rootip));
 	if (!root) {
 		error = ENOENT;
 		goto fail_unmount;
@@ -1369,10 +1762,28 @@ xfs_fs_fill_super(
 
 	xfs_itrace_exit(XFS_I(sb->s_root->d_inode));
 
-	kmem_free(args, sizeof(*args));
+	kfree(args);
 	return 0;
 
-fail_vnrele:
+ out_filestream_unmount:
+	xfs_filestream_unmount(mp);
+ out_free_sb:
+	xfs_freesb(mp);
+ out_free_fsname:
+	xfs_free_fsname(mp);
+	xfs_icsb_destroy_counters(mp);
+	xfs_close_devices(mp);
+ out_put_qmops:
+	xfs_qmops_put(mp);
+ out_put_dmops:
+	xfs_dmops_put(mp);
+ out_free_mp:
+	kfree(mp);
+ out_free_args:
+	kfree(args);
+	return -error;
+
+ fail_vnrele:
 	if (sb->s_root) {
 		dput(sb->s_root);
 		sb->s_root = NULL;
@@ -1380,12 +1791,20 @@ fail_vnrele:
 		iput(root);
 	}
 
-fail_unmount:
-	xfs_unmount(mp, 0, NULL);
+ fail_unmount:
+	/*
+	 * Blow away any referenced inode in the filestreams cache.
+	 * This can and will cause log traffic as inodes go inactive
+	 * here.
+	 */
+	xfs_filestream_unmount(mp);
+
+	XFS_bflush(mp->m_ddev_targp);
+	error = xfs_unmount_flush(mp, 0);
+	WARN_ON(error);
 
-fail_vfsop:
-	kmem_free(args, sizeof(*args));
-	return -error;
+	xfs_unmountfs(mp);
+	goto out_free_sb;
 }
 
 STATIC int
@@ -1430,9 +1849,235 @@ static struct file_system_type xfs_fs_type = {
 	.fs_flags		= FS_REQUIRES_DEV,
 };
 
+STATIC int __init
+xfs_alloc_trace_bufs(void)
+{
+#ifdef XFS_ALLOC_TRACE
+	xfs_alloc_trace_buf = ktrace_alloc(XFS_ALLOC_TRACE_SIZE, KM_MAYFAIL);
+	if (!xfs_alloc_trace_buf)
+		goto out;
+#endif
+#ifdef XFS_BMAP_TRACE
+	xfs_bmap_trace_buf = ktrace_alloc(XFS_BMAP_TRACE_SIZE, KM_MAYFAIL);
+	if (!xfs_bmap_trace_buf)
+		goto out_free_alloc_trace;
+#endif
+#ifdef XFS_BMBT_TRACE
+	xfs_bmbt_trace_buf = ktrace_alloc(XFS_BMBT_TRACE_SIZE, KM_MAYFAIL);
+	if (!xfs_bmbt_trace_buf)
+		goto out_free_bmap_trace;
+#endif
+#ifdef XFS_ATTR_TRACE
+	xfs_attr_trace_buf = ktrace_alloc(XFS_ATTR_TRACE_SIZE, KM_MAYFAIL);
+	if (!xfs_attr_trace_buf)
+		goto out_free_bmbt_trace;
+#endif
+#ifdef XFS_DIR2_TRACE
+	xfs_dir2_trace_buf = ktrace_alloc(XFS_DIR2_GTRACE_SIZE, KM_MAYFAIL);
+	if (!xfs_dir2_trace_buf)
+		goto out_free_attr_trace;
+#endif
+
+	return 0;
+
+#ifdef XFS_DIR2_TRACE
+ out_free_attr_trace:
+#endif
+#ifdef XFS_ATTR_TRACE
+	ktrace_free(xfs_attr_trace_buf);
+ out_free_bmbt_trace:
+#endif
+#ifdef XFS_BMBT_TRACE
+	ktrace_free(xfs_bmbt_trace_buf);
+ out_free_bmap_trace:
+#endif
+#ifdef XFS_BMAP_TRACE
+	ktrace_free(xfs_bmap_trace_buf);
+ out_free_alloc_trace:
+#endif
+#ifdef XFS_ALLOC_TRACE
+	ktrace_free(xfs_alloc_trace_buf);
+ out:
+#endif
+	return -ENOMEM;
+}
+
+STATIC void
+xfs_free_trace_bufs(void)
+{
+#ifdef XFS_DIR2_TRACE
+	ktrace_free(xfs_dir2_trace_buf);
+#endif
+#ifdef XFS_ATTR_TRACE
+	ktrace_free(xfs_attr_trace_buf);
+#endif
+#ifdef XFS_BMBT_TRACE
+	ktrace_free(xfs_bmbt_trace_buf);
+#endif
+#ifdef XFS_BMAP_TRACE
+	ktrace_free(xfs_bmap_trace_buf);
+#endif
+#ifdef XFS_ALLOC_TRACE
+	ktrace_free(xfs_alloc_trace_buf);
+#endif
+}
+
+STATIC int __init
+xfs_init_zones(void)
+{
+	xfs_vnode_zone = kmem_zone_init_flags(sizeof(struct inode), "xfs_vnode",
+					KM_ZONE_HWALIGN | KM_ZONE_RECLAIM |
+					KM_ZONE_SPREAD,
+					xfs_fs_inode_init_once);
+	if (!xfs_vnode_zone)
+		goto out;
+
+	xfs_ioend_zone = kmem_zone_init(sizeof(xfs_ioend_t), "xfs_ioend");
+	if (!xfs_ioend_zone)
+		goto out_destroy_vnode_zone;
+
+	xfs_ioend_pool = mempool_create_slab_pool(4 * MAX_BUF_PER_PAGE,
+						  xfs_ioend_zone);
+	if (!xfs_ioend_pool)
+		goto out_destroy_ioend_zone;
+
+	xfs_log_ticket_zone = kmem_zone_init(sizeof(xlog_ticket_t),
+						"xfs_log_ticket");
+	if (!xfs_log_ticket_zone)
+		goto out_destroy_ioend_pool;
+
+	xfs_bmap_free_item_zone = kmem_zone_init(sizeof(xfs_bmap_free_item_t),
+						"xfs_bmap_free_item");
+	if (!xfs_bmap_free_item_zone)
+		goto out_destroy_log_ticket_zone;
+	xfs_btree_cur_zone = kmem_zone_init(sizeof(xfs_btree_cur_t),
+						"xfs_btree_cur");
+	if (!xfs_btree_cur_zone)
+		goto out_destroy_bmap_free_item_zone;
+
+	xfs_da_state_zone = kmem_zone_init(sizeof(xfs_da_state_t),
+						"xfs_da_state");
+	if (!xfs_da_state_zone)
+		goto out_destroy_btree_cur_zone;
+
+	xfs_dabuf_zone = kmem_zone_init(sizeof(xfs_dabuf_t), "xfs_dabuf");
+	if (!xfs_dabuf_zone)
+		goto out_destroy_da_state_zone;
+
+	xfs_ifork_zone = kmem_zone_init(sizeof(xfs_ifork_t), "xfs_ifork");
+	if (!xfs_ifork_zone)
+		goto out_destroy_dabuf_zone;
+
+	xfs_trans_zone = kmem_zone_init(sizeof(xfs_trans_t), "xfs_trans");
+	if (!xfs_trans_zone)
+		goto out_destroy_ifork_zone;
+
+	/*
+	 * The size of the zone allocated buf log item is the maximum
+	 * size possible under XFS.  This wastes a little bit of memory,
+	 * but it is much faster.
+	 */
+	xfs_buf_item_zone = kmem_zone_init((sizeof(xfs_buf_log_item_t) +
+				(((XFS_MAX_BLOCKSIZE / XFS_BLI_CHUNK) /
+				  NBWORD) * sizeof(int))), "xfs_buf_item");
+	if (!xfs_buf_item_zone)
+		goto out_destroy_trans_zone;
+
+	xfs_efd_zone = kmem_zone_init((sizeof(xfs_efd_log_item_t) +
+			((XFS_EFD_MAX_FAST_EXTENTS - 1) *
+				 sizeof(xfs_extent_t))), "xfs_efd_item");
+	if (!xfs_efd_zone)
+		goto out_destroy_buf_item_zone;
+
+	xfs_efi_zone = kmem_zone_init((sizeof(xfs_efi_log_item_t) +
+			((XFS_EFI_MAX_FAST_EXTENTS - 1) *
+				sizeof(xfs_extent_t))), "xfs_efi_item");
+	if (!xfs_efi_zone)
+		goto out_destroy_efd_zone;
+
+	xfs_inode_zone =
+		kmem_zone_init_flags(sizeof(xfs_inode_t), "xfs_inode",
+					KM_ZONE_HWALIGN | KM_ZONE_RECLAIM |
+					KM_ZONE_SPREAD, NULL);
+	if (!xfs_inode_zone)
+		goto out_destroy_efi_zone;
+
+	xfs_ili_zone =
+		kmem_zone_init_flags(sizeof(xfs_inode_log_item_t), "xfs_ili",
+					KM_ZONE_SPREAD, NULL);
+	if (!xfs_ili_zone)
+		goto out_destroy_inode_zone;
+
+#ifdef CONFIG_XFS_POSIX_ACL
+	xfs_acl_zone = kmem_zone_init(sizeof(xfs_acl_t), "xfs_acl");
+	if (!xfs_acl_zone)
+		goto out_destroy_ili_zone;
+#endif
+
+	return 0;
+
+#ifdef CONFIG_XFS_POSIX_ACL
+ out_destroy_ili_zone:
+#endif
+	kmem_zone_destroy(xfs_ili_zone);
+ out_destroy_inode_zone:
+	kmem_zone_destroy(xfs_inode_zone);
+ out_destroy_efi_zone:
+	kmem_zone_destroy(xfs_efi_zone);
+ out_destroy_efd_zone:
+	kmem_zone_destroy(xfs_efd_zone);
+ out_destroy_buf_item_zone:
+	kmem_zone_destroy(xfs_buf_item_zone);
+ out_destroy_trans_zone:
+	kmem_zone_destroy(xfs_trans_zone);
+ out_destroy_ifork_zone:
+	kmem_zone_destroy(xfs_ifork_zone);
+ out_destroy_dabuf_zone:
+	kmem_zone_destroy(xfs_dabuf_zone);
+ out_destroy_da_state_zone:
+	kmem_zone_destroy(xfs_da_state_zone);
+ out_destroy_btree_cur_zone:
+	kmem_zone_destroy(xfs_btree_cur_zone);
+ out_destroy_bmap_free_item_zone:
+	kmem_zone_destroy(xfs_bmap_free_item_zone);
+ out_destroy_log_ticket_zone:
+	kmem_zone_destroy(xfs_log_ticket_zone);
+ out_destroy_ioend_pool:
+	mempool_destroy(xfs_ioend_pool);
+ out_destroy_ioend_zone:
+	kmem_zone_destroy(xfs_ioend_zone);
+ out_destroy_vnode_zone:
+	kmem_zone_destroy(xfs_vnode_zone);
+ out:
+	return -ENOMEM;
+}
+
+STATIC void
+xfs_destroy_zones(void)
+{
+#ifdef CONFIG_XFS_POSIX_ACL
+	kmem_zone_destroy(xfs_acl_zone);
+#endif
+	kmem_zone_destroy(xfs_ili_zone);
+	kmem_zone_destroy(xfs_inode_zone);
+	kmem_zone_destroy(xfs_efi_zone);
+	kmem_zone_destroy(xfs_efd_zone);
+	kmem_zone_destroy(xfs_buf_item_zone);
+	kmem_zone_destroy(xfs_trans_zone);
+	kmem_zone_destroy(xfs_ifork_zone);
+	kmem_zone_destroy(xfs_dabuf_zone);
+	kmem_zone_destroy(xfs_da_state_zone);
+	kmem_zone_destroy(xfs_btree_cur_zone);
+	kmem_zone_destroy(xfs_bmap_free_item_zone);
+	kmem_zone_destroy(xfs_log_ticket_zone);
+	mempool_destroy(xfs_ioend_pool);
+	kmem_zone_destroy(xfs_ioend_zone);
+	kmem_zone_destroy(xfs_vnode_zone);
+
+}
 
 STATIC int __init
-init_xfs_fs( void )
+init_xfs_fs(void)
 {
 	int			error;
 	static char		message[] __initdata = KERN_INFO \
@@ -1441,42 +2086,73 @@ init_xfs_fs( void )
 	printk(message);
 
 	ktrace_init(64);
+	vn_init();
+	xfs_dir_startup();
 
 	error = xfs_init_zones();
-	if (error < 0)
-		goto undo_zones;
+	if (error)
+		goto out;
+
+	error = xfs_alloc_trace_bufs();
+	if (error)
+		goto out_destroy_zones;
+
+	error = xfs_mru_cache_init();
+	if (error)
+		goto out_free_trace_buffers;
+
+	error = xfs_filestream_init();
+	if (error)
+		goto out_mru_cache_uninit;
 
 	error = xfs_buf_init();
-	if (error < 0)
-		goto undo_buffers;
+	if (error)
+		goto out_filestream_uninit;
+
+	error = xfs_init_procfs();
+	if (error)
+		goto out_buf_terminate;
+
+	error = xfs_sysctl_register();
+	if (error)
+		goto out_cleanup_procfs;
 
-	vn_init();
-	xfs_init();
-	uuid_init();
 	vfs_initquota();
 
 	error = register_filesystem(&xfs_fs_type);
 	if (error)
-		goto undo_register;
+		goto out_sysctl_unregister;
 	return 0;
 
-undo_register:
+ out_sysctl_unregister:
+	xfs_sysctl_unregister();
+ out_cleanup_procfs:
+	xfs_cleanup_procfs();
+ out_buf_terminate:
 	xfs_buf_terminate();
-
-undo_buffers:
+ out_filestream_uninit:
+	xfs_filestream_uninit();
+ out_mru_cache_uninit:
+	xfs_mru_cache_uninit();
+ out_free_trace_buffers:
+	xfs_free_trace_bufs();
+ out_destroy_zones:
 	xfs_destroy_zones();
-
-undo_zones:
+ out:
 	return error;
 }
 
 STATIC void __exit
-exit_xfs_fs( void )
+exit_xfs_fs(void)
 {
 	vfs_exitquota();
 	unregister_filesystem(&xfs_fs_type);
-	xfs_cleanup();
+	xfs_sysctl_unregister();
+	xfs_cleanup_procfs();
 	xfs_buf_terminate();
+	xfs_filestream_uninit();
+	xfs_mru_cache_uninit();
+	xfs_free_trace_bufs();
 	xfs_destroy_zones();
 	ktrace_uninit();
 }
diff --git a/fs/xfs/linux-2.6/xfs_super.h b/fs/xfs/linux-2.6/xfs_super.h
index 3efb7c6d3303..fe2ef4e6a0f9 100644
--- a/fs/xfs/linux-2.6/xfs_super.h
+++ b/fs/xfs/linux-2.6/xfs_super.h
@@ -101,18 +101,13 @@ struct block_device;
 
 extern __uint64_t xfs_max_file_offset(unsigned int);
 
-extern void xfs_initialize_vnode(struct xfs_mount *mp, bhv_vnode_t *vp,
-		struct xfs_inode *ip);
-
 extern void xfs_flush_inode(struct xfs_inode *);
 extern void xfs_flush_device(struct xfs_inode *);
 
-extern int  xfs_blkdev_get(struct xfs_mount *, const char *,
-				struct block_device **);
-extern void xfs_blkdev_put(struct block_device *);
 extern void xfs_blkdev_issue_flush(struct xfs_buftarg *);
 
 extern const struct export_operations xfs_export_operations;
+extern struct xattr_handler *xfs_xattr_handlers[];
 
 #define XFS_M(sb)		((struct xfs_mount *)((sb)->s_fs_info))
 
diff --git a/fs/xfs/linux-2.6/xfs_sysctl.c b/fs/xfs/linux-2.6/xfs_sysctl.c
index bb997d75c05c..7dacb5bbde3f 100644
--- a/fs/xfs/linux-2.6/xfs_sysctl.c
+++ b/fs/xfs/linux-2.6/xfs_sysctl.c
@@ -259,15 +259,17 @@ static ctl_table xfs_root_table[] = {
 	{}
 };
 
-void
+int
 xfs_sysctl_register(void)
 {
 	xfs_table_header = register_sysctl_table(xfs_root_table);
+	if (!xfs_table_header)
+		return -ENOMEM;
+	return 0;
 }
 
 void
 xfs_sysctl_unregister(void)
 {
-	if (xfs_table_header)
-		unregister_sysctl_table(xfs_table_header);
+	unregister_sysctl_table(xfs_table_header);
 }
diff --git a/fs/xfs/linux-2.6/xfs_sysctl.h b/fs/xfs/linux-2.6/xfs_sysctl.h
index 98b97e399d6f..4aadb8056c37 100644
--- a/fs/xfs/linux-2.6/xfs_sysctl.h
+++ b/fs/xfs/linux-2.6/xfs_sysctl.h
@@ -93,10 +93,10 @@ enum {
 extern xfs_param_t	xfs_params;
 
 #ifdef CONFIG_SYSCTL
-extern void xfs_sysctl_register(void);
+extern int xfs_sysctl_register(void);
 extern void xfs_sysctl_unregister(void);
 #else
-# define xfs_sysctl_register()		do { } while (0)
+# define xfs_sysctl_register()		(0)
 # define xfs_sysctl_unregister()	do { } while (0)
 #endif /* CONFIG_SYSCTL */
 
diff --git a/fs/xfs/linux-2.6/xfs_vnode.c b/fs/xfs/linux-2.6/xfs_vnode.c
index bc7afe007338..b52528bbbfff 100644
--- a/fs/xfs/linux-2.6/xfs_vnode.c
+++ b/fs/xfs/linux-2.6/xfs_vnode.c
@@ -33,7 +33,7 @@
 
 
 /*
- * Dedicated vnode inactive/reclaim sync semaphores.
+ * Dedicated vnode inactive/reclaim sync wait queues.
  * Prime number of hash buckets since address is used as the key.
  */
 #define NVSYNC                  37
@@ -82,74 +82,6 @@ vn_ioerror(
 		xfs_do_force_shutdown(ip->i_mount, SHUTDOWN_DEVICE_REQ, f, l);
 }
 
-/*
- * Revalidate the Linux inode from the XFS inode.
- * Note: i_size _not_ updated; we must hold the inode
- * semaphore when doing that - callers responsibility.
- */
-int
-vn_revalidate(
-	bhv_vnode_t		*vp)
-{
-	struct inode		*inode = vn_to_inode(vp);
-	struct xfs_inode	*ip = XFS_I(inode);
-	struct xfs_mount	*mp = ip->i_mount;
-	unsigned long		xflags;
-
-	xfs_itrace_entry(ip);
-
-	if (XFS_FORCED_SHUTDOWN(mp))
-		return -EIO;
-
-	xfs_ilock(ip, XFS_ILOCK_SHARED);
-	inode->i_mode	    = ip->i_d.di_mode;
-	inode->i_uid	    = ip->i_d.di_uid;
-	inode->i_gid	    = ip->i_d.di_gid;
-	inode->i_mtime.tv_sec = ip->i_d.di_mtime.t_sec;
-	inode->i_mtime.tv_nsec = ip->i_d.di_mtime.t_nsec;
-	inode->i_ctime.tv_sec = ip->i_d.di_ctime.t_sec;
-	inode->i_ctime.tv_nsec = ip->i_d.di_ctime.t_nsec;
-
-	xflags = xfs_ip2xflags(ip);
-	if (xflags & XFS_XFLAG_IMMUTABLE)
-		inode->i_flags |= S_IMMUTABLE;
-	else
-		inode->i_flags &= ~S_IMMUTABLE;
-	if (xflags & XFS_XFLAG_APPEND)
-		inode->i_flags |= S_APPEND;
-	else
-		inode->i_flags &= ~S_APPEND;
-	if (xflags & XFS_XFLAG_SYNC)
-		inode->i_flags |= S_SYNC;
-	else
-		inode->i_flags &= ~S_SYNC;
-	if (xflags & XFS_XFLAG_NOATIME)
-		inode->i_flags |= S_NOATIME;
-	else
-		inode->i_flags &= ~S_NOATIME;
-	xfs_iunlock(ip, XFS_ILOCK_SHARED);
-
-	xfs_iflags_clear(ip, XFS_IMODIFIED);
-	return 0;
-}
-
-/*
- * Add a reference to a referenced vnode.
- */
-bhv_vnode_t *
-vn_hold(
-	bhv_vnode_t	*vp)
-{
-	struct inode	*inode;
-
-	XFS_STATS_INC(vn_hold);
-
-	inode = igrab(vn_to_inode(vp));
-	ASSERT(inode);
-
-	return vp;
-}
-
 #ifdef	XFS_INODE_TRACE
 
 /*
@@ -158,7 +90,7 @@ vn_hold(
  */
 static inline int xfs_icount(struct xfs_inode *ip)
 {
-	bhv_vnode_t *vp = XFS_ITOV_NULL(ip);
+	struct inode *vp = VFS_I(ip);
 
 	if (vp)
 		return vn_count(vp);
diff --git a/fs/xfs/linux-2.6/xfs_vnode.h b/fs/xfs/linux-2.6/xfs_vnode.h
index 25eb2a9e8d9b..683ce16210ff 100644
--- a/fs/xfs/linux-2.6/xfs_vnode.h
+++ b/fs/xfs/linux-2.6/xfs_vnode.h
@@ -19,24 +19,9 @@
 #define __XFS_VNODE_H__
 
 struct file;
-struct bhv_vattr;
 struct xfs_iomap;
 struct attrlist_cursor_kern;
 
-typedef struct inode	bhv_vnode_t;
-
-/*
- * Vnode to Linux inode mapping.
- */
-static inline bhv_vnode_t *vn_from_inode(struct inode *inode)
-{
-	return inode;
-}
-static inline struct inode *vn_to_inode(bhv_vnode_t *vnode)
-{
-	return vnode;
-}
-
 /*
  * Return values for xfs_inactive.  A return value of
  * VN_INACTIVE_NOCACHE implies that the file system behavior
@@ -66,87 +51,8 @@ static inline struct inode *vn_to_inode(bhv_vnode_t *vnode)
 					   Prevent VM access to the pages until
 					   the operation completes. */
 
-/*
- * Vnode attributes.  va_mask indicates those attributes the caller
- * wants to set or extract.
- */
-typedef struct bhv_vattr {
-	int		va_mask;	/* bit-mask of attributes present */
-	mode_t		va_mode;	/* file access mode and type */
-	xfs_nlink_t	va_nlink;	/* number of references to file */
-	uid_t		va_uid;		/* owner user id */
-	gid_t		va_gid;		/* owner group id */
-	xfs_ino_t	va_nodeid;	/* file id */
-	xfs_off_t	va_size;	/* file size in bytes */
-	u_long		va_blocksize;	/* blocksize preferred for i/o */
-	struct timespec	va_atime;	/* time of last access */
-	struct timespec	va_mtime;	/* time of last modification */
-	struct timespec	va_ctime;	/* time file changed */
-	u_int		va_gen;		/* generation number of file */
-	xfs_dev_t	va_rdev;	/* device the special file represents */
-	__int64_t	va_nblocks;	/* number of blocks allocated */
-	u_long		va_xflags;	/* random extended file flags */
-	u_long		va_extsize;	/* file extent size */
-	u_long		va_nextents;	/* number of extents in file */
-	u_long		va_anextents;	/* number of attr extents in file */
-	prid_t		va_projid;	/* project id */
-} bhv_vattr_t;
-
-/*
- * setattr or getattr attributes
- */
-#define XFS_AT_TYPE		0x00000001
-#define XFS_AT_MODE		0x00000002
-#define XFS_AT_UID		0x00000004
-#define XFS_AT_GID		0x00000008
-#define XFS_AT_FSID		0x00000010
-#define XFS_AT_NODEID		0x00000020
-#define XFS_AT_NLINK		0x00000040
-#define XFS_AT_SIZE		0x00000080
-#define XFS_AT_ATIME		0x00000100
-#define XFS_AT_MTIME		0x00000200
-#define XFS_AT_CTIME		0x00000400
-#define XFS_AT_RDEV		0x00000800
-#define XFS_AT_BLKSIZE		0x00001000
-#define XFS_AT_NBLOCKS		0x00002000
-#define XFS_AT_VCODE		0x00004000
-#define XFS_AT_MAC		0x00008000
-#define XFS_AT_UPDATIME		0x00010000
-#define XFS_AT_UPDMTIME		0x00020000
-#define XFS_AT_UPDCTIME		0x00040000
-#define XFS_AT_ACL		0x00080000
-#define XFS_AT_CAP		0x00100000
-#define XFS_AT_INF		0x00200000
-#define XFS_AT_XFLAGS		0x00400000
-#define XFS_AT_EXTSIZE		0x00800000
-#define XFS_AT_NEXTENTS		0x01000000
-#define XFS_AT_ANEXTENTS	0x02000000
-#define XFS_AT_PROJID		0x04000000
-#define XFS_AT_SIZE_NOPERM	0x08000000
-#define XFS_AT_GENCOUNT		0x10000000
-
-#define XFS_AT_ALL	(XFS_AT_TYPE|XFS_AT_MODE|XFS_AT_UID|XFS_AT_GID|\
-		XFS_AT_FSID|XFS_AT_NODEID|XFS_AT_NLINK|XFS_AT_SIZE|\
-		XFS_AT_ATIME|XFS_AT_MTIME|XFS_AT_CTIME|XFS_AT_RDEV|\
-		XFS_AT_BLKSIZE|XFS_AT_NBLOCKS|XFS_AT_VCODE|XFS_AT_MAC|\
-		XFS_AT_ACL|XFS_AT_CAP|XFS_AT_INF|XFS_AT_XFLAGS|XFS_AT_EXTSIZE|\
-		XFS_AT_NEXTENTS|XFS_AT_ANEXTENTS|XFS_AT_PROJID|XFS_AT_GENCOUNT)
-
-#define XFS_AT_STAT	(XFS_AT_TYPE|XFS_AT_MODE|XFS_AT_UID|XFS_AT_GID|\
-		XFS_AT_FSID|XFS_AT_NODEID|XFS_AT_NLINK|XFS_AT_SIZE|\
-		XFS_AT_ATIME|XFS_AT_MTIME|XFS_AT_CTIME|XFS_AT_RDEV|\
-		XFS_AT_BLKSIZE|XFS_AT_NBLOCKS|XFS_AT_PROJID)
-
-#define XFS_AT_TIMES	(XFS_AT_ATIME|XFS_AT_MTIME|XFS_AT_CTIME)
-
-#define XFS_AT_UPDTIMES	(XFS_AT_UPDATIME|XFS_AT_UPDMTIME|XFS_AT_UPDCTIME)
-
-#define XFS_AT_NOSET	(XFS_AT_NLINK|XFS_AT_RDEV|XFS_AT_FSID|XFS_AT_NODEID|\
-		XFS_AT_TYPE|XFS_AT_BLKSIZE|XFS_AT_NBLOCKS|XFS_AT_VCODE|\
-		XFS_AT_NEXTENTS|XFS_AT_ANEXTENTS|XFS_AT_GENCOUNT)
 
 extern void	vn_init(void);
-extern int	vn_revalidate(bhv_vnode_t *);
 
 /*
  * Yeah, these don't take vnode anymore at all, all this should be
@@ -156,57 +62,52 @@ extern void	vn_iowait(struct xfs_inode *ip);
 extern void	vn_iowake(struct xfs_inode *ip);
 extern void	vn_ioerror(struct xfs_inode *ip, int error, char *f, int l);
 
-static inline int vn_count(bhv_vnode_t *vp)
+static inline int vn_count(struct inode *vp)
 {
-	return atomic_read(&vn_to_inode(vp)->i_count);
+	return atomic_read(&vp->i_count);
 }
 
-/*
- * Vnode reference counting functions (and macros for compatibility).
- */
-extern bhv_vnode_t	*vn_hold(bhv_vnode_t *);
+#define IHOLD(ip) \
+do { \
+	ASSERT(atomic_read(&VFS_I(ip)->i_count) > 0) ; \
+	atomic_inc(&(VFS_I(ip)->i_count)); \
+	xfs_itrace_hold((ip), __FILE__, __LINE__, (inst_t *)__return_address); \
+} while (0)
 
-#if defined(XFS_INODE_TRACE)
-#define VN_HOLD(vp)		\
-	((void)vn_hold(vp),	\
-	  xfs_itrace_hold(xfs_vtoi(vp), __FILE__, __LINE__, (inst_t *)__return_address))
-#define VN_RELE(vp)		\
-	  (xfs_itrace_rele(xfs_vtoi(vp), __FILE__, __LINE__, (inst_t *)__return_address), \
-	   iput(vn_to_inode(vp)))
-#else
-#define VN_HOLD(vp)		((void)vn_hold(vp))
-#define VN_RELE(vp)		(iput(vn_to_inode(vp)))
-#endif
+#define IRELE(ip) \
+do { \
+	xfs_itrace_rele((ip), __FILE__, __LINE__, (inst_t *)__return_address); \
+	iput(VFS_I(ip)); \
+} while (0)
 
-static inline bhv_vnode_t *vn_grab(bhv_vnode_t *vp)
+static inline struct inode *vn_grab(struct inode *vp)
 {
-	struct inode *inode = igrab(vn_to_inode(vp));
-	return inode ? vn_from_inode(inode) : NULL;
+	return igrab(vp);
 }
 
 /*
  * Dealing with bad inodes
  */
-static inline int VN_BAD(bhv_vnode_t *vp)
+static inline int VN_BAD(struct inode *vp)
 {
-	return is_bad_inode(vn_to_inode(vp));
+	return is_bad_inode(vp);
 }
 
 /*
  * Extracting atime values in various formats
  */
-static inline void vn_atime_to_bstime(bhv_vnode_t *vp, xfs_bstime_t *bs_atime)
+static inline void vn_atime_to_bstime(struct inode *vp, xfs_bstime_t *bs_atime)
 {
 	bs_atime->tv_sec = vp->i_atime.tv_sec;
 	bs_atime->tv_nsec = vp->i_atime.tv_nsec;
 }
 
-static inline void vn_atime_to_timespec(bhv_vnode_t *vp, struct timespec *ts)
+static inline void vn_atime_to_timespec(struct inode *vp, struct timespec *ts)
 {
 	*ts = vp->i_atime;
 }
 
-static inline void vn_atime_to_time_t(bhv_vnode_t *vp, time_t *tt)
+static inline void vn_atime_to_time_t(struct inode *vp, time_t *tt)
 {
 	*tt = vp->i_atime.tv_sec;
 }
@@ -214,20 +115,11 @@ static inline void vn_atime_to_time_t(bhv_vnode_t *vp, time_t *tt)
 /*
  * Some useful predicates.
  */
-#define VN_MAPPED(vp)	mapping_mapped(vn_to_inode(vp)->i_mapping)
-#define VN_CACHED(vp)	(vn_to_inode(vp)->i_mapping->nrpages)
-#define VN_DIRTY(vp)	mapping_tagged(vn_to_inode(vp)->i_mapping, \
+#define VN_MAPPED(vp)	mapping_mapped(vp->i_mapping)
+#define VN_CACHED(vp)	(vp->i_mapping->nrpages)
+#define VN_DIRTY(vp)	mapping_tagged(vp->i_mapping, \
 					PAGECACHE_TAG_DIRTY)
 
-/*
- * Flags to vop_setattr/getattr.
- */
-#define	ATTR_UTIME	0x01	/* non-default utime(2) request */
-#define	ATTR_DMI	0x08	/* invocation from a DMI function */
-#define	ATTR_LAZY	0x80	/* set/get attributes lazily */
-#define	ATTR_NONBLOCK	0x100	/* return EAGAIN if operation would block */
-#define ATTR_NOLOCK	0x200	/* Don't grab any conflicting locks */
-#define ATTR_NOSIZETOK	0x400	/* Don't get the SIZE token */
 
 /*
  * Tracking vnode activity.
diff --git a/fs/xfs/linux-2.6/xfs_xattr.c b/fs/xfs/linux-2.6/xfs_xattr.c
new file mode 100644
index 000000000000..964621fde6ed
--- /dev/null
+++ b/fs/xfs/linux-2.6/xfs_xattr.c
@@ -0,0 +1,330 @@
+/*
+ * Copyright (C) 2008 Christoph Hellwig.
+ * Portions Copyright (C) 2000-2008 Silicon Graphics, Inc.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it would be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write the Free Software Foundation,
+ * Inc.,  51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ */
+
+#include "xfs.h"
+#include "xfs_da_btree.h"
+#include "xfs_bmap_btree.h"
+#include "xfs_inode.h"
+#include "xfs_attr.h"
+#include "xfs_attr_leaf.h"
+#include "xfs_acl.h"
+#include "xfs_vnodeops.h"
+
+#include <linux/posix_acl_xattr.h>
+#include <linux/xattr.h>
+
+
+/*
+ * ACL handling.  Should eventually be moved into xfs_acl.c
+ */
+
+static int
+xfs_decode_acl(const char *name)
+{
+	if (strcmp(name, "posix_acl_access") == 0)
+		return _ACL_TYPE_ACCESS;
+	else if (strcmp(name, "posix_acl_default") == 0)
+		return _ACL_TYPE_DEFAULT;
+	return -EINVAL;
+}
+
+/*
+ * Get system extended attributes which at the moment only
+ * includes Posix ACLs.
+ */
+static int
+xfs_xattr_system_get(struct inode *inode, const char *name,
+		void *buffer, size_t size)
+{
+	int acl;
+
+	acl = xfs_decode_acl(name);
+	if (acl < 0)
+		return acl;
+
+	return xfs_acl_vget(inode, buffer, size, acl);
+}
+
+static int
+xfs_xattr_system_set(struct inode *inode, const char *name,
+		const void *value, size_t size, int flags)
+{
+	int acl;
+
+	acl = xfs_decode_acl(name);
+	if (acl < 0)
+		return acl;
+	if (flags & XATTR_CREATE)
+		return -EINVAL;
+
+	if (!value)
+		return xfs_acl_vremove(inode, acl);
+
+	return xfs_acl_vset(inode, (void *)value, size, acl);
+}
+
+static struct xattr_handler xfs_xattr_system_handler = {
+	.prefix	= XATTR_SYSTEM_PREFIX,
+	.get	= xfs_xattr_system_get,
+	.set	= xfs_xattr_system_set,
+};
+
+
+/*
+ * Real xattr handling.  The only difference between the namespaces is
+ * a flag passed to the low-level attr code.
+ */
+
+static int
+__xfs_xattr_get(struct inode *inode, const char *name,
+		void *value, size_t size, int xflags)
+{
+	struct xfs_inode *ip = XFS_I(inode);
+	int error, asize = size;
+
+	if (strcmp(name, "") == 0)
+		return -EINVAL;
+
+	/* Convert Linux syscall to XFS internal ATTR flags */
+	if (!size) {
+		xflags |= ATTR_KERNOVAL;
+		value = NULL;
+	}
+
+	error = -xfs_attr_get(ip, name, value, &asize, xflags);
+	if (error)
+		return error;
+	return asize;
+}
+
+static int
+__xfs_xattr_set(struct inode *inode, const char *name, const void *value,
+		size_t size, int flags, int xflags)
+{
+	struct xfs_inode *ip = XFS_I(inode);
+
+	if (strcmp(name, "") == 0)
+		return -EINVAL;
+
+	/* Convert Linux syscall to XFS internal ATTR flags */
+	if (flags & XATTR_CREATE)
+		xflags |= ATTR_CREATE;
+	if (flags & XATTR_REPLACE)
+		xflags |= ATTR_REPLACE;
+
+	if (!value)
+		return -xfs_attr_remove(ip, name, xflags);
+	return -xfs_attr_set(ip, name, (void *)value, size, xflags);
+}
+
+static int
+xfs_xattr_user_get(struct inode *inode, const char *name,
+		void *value, size_t size)
+{
+	return __xfs_xattr_get(inode, name, value, size, 0);
+}
+
+static int
+xfs_xattr_user_set(struct inode *inode, const char *name,
+		const void *value, size_t size, int flags)
+{
+	return __xfs_xattr_set(inode, name, value, size, flags, 0);
+}
+
+static struct xattr_handler xfs_xattr_user_handler = {
+	.prefix	= XATTR_USER_PREFIX,
+	.get	= xfs_xattr_user_get,
+	.set	= xfs_xattr_user_set,
+};
+
+
+static int
+xfs_xattr_trusted_get(struct inode *inode, const char *name,
+		void *value, size_t size)
+{
+	return __xfs_xattr_get(inode, name, value, size, ATTR_ROOT);
+}
+
+static int
+xfs_xattr_trusted_set(struct inode *inode, const char *name,
+		const void *value, size_t size, int flags)
+{
+	return __xfs_xattr_set(inode, name, value, size, flags, ATTR_ROOT);
+}
+
+static struct xattr_handler xfs_xattr_trusted_handler = {
+	.prefix	= XATTR_TRUSTED_PREFIX,
+	.get	= xfs_xattr_trusted_get,
+	.set	= xfs_xattr_trusted_set,
+};
+
+
+static int
+xfs_xattr_secure_get(struct inode *inode, const char *name,
+		void *value, size_t size)
+{
+	return __xfs_xattr_get(inode, name, value, size, ATTR_SECURE);
+}
+
+static int
+xfs_xattr_secure_set(struct inode *inode, const char *name,
+		const void *value, size_t size, int flags)
+{
+	return __xfs_xattr_set(inode, name, value, size, flags, ATTR_SECURE);
+}
+
+static struct xattr_handler xfs_xattr_security_handler = {
+	.prefix	= XATTR_SECURITY_PREFIX,
+	.get	= xfs_xattr_secure_get,
+	.set	= xfs_xattr_secure_set,
+};
+
+
+struct xattr_handler *xfs_xattr_handlers[] = {
+	&xfs_xattr_user_handler,
+	&xfs_xattr_trusted_handler,
+	&xfs_xattr_security_handler,
+	&xfs_xattr_system_handler,
+	NULL
+};
+
+static unsigned int xfs_xattr_prefix_len(int flags)
+{
+	if (flags & XFS_ATTR_SECURE)
+		return sizeof("security");
+	else if (flags & XFS_ATTR_ROOT)
+		return sizeof("trusted");
+	else
+		return sizeof("user");
+}
+
+static const char *xfs_xattr_prefix(int flags)
+{
+	if (flags & XFS_ATTR_SECURE)
+		return xfs_xattr_security_handler.prefix;
+	else if (flags & XFS_ATTR_ROOT)
+		return xfs_xattr_trusted_handler.prefix;
+	else
+		return xfs_xattr_user_handler.prefix;
+}
+
+static int
+xfs_xattr_put_listent(struct xfs_attr_list_context *context, int flags,
+		char *name, int namelen, int valuelen, char *value)
+{
+	unsigned int prefix_len = xfs_xattr_prefix_len(flags);
+	char *offset;
+	int arraytop;
+
+	ASSERT(context->count >= 0);
+
+	/*
+	 * Only show root namespace entries if we are actually allowed to
+	 * see them.
+	 */
+	if ((flags & XFS_ATTR_ROOT) && !capable(CAP_SYS_ADMIN))
+		return 0;
+
+	arraytop = context->count + prefix_len + namelen + 1;
+	if (arraytop > context->firstu) {
+		context->count = -1;	/* insufficient space */
+		return 1;
+	}
+	offset = (char *)context->alist + context->count;
+	strncpy(offset, xfs_xattr_prefix(flags), prefix_len);
+	offset += prefix_len;
+	strncpy(offset, name, namelen);			/* real name */
+	offset += namelen;
+	*offset = '\0';
+	context->count += prefix_len + namelen + 1;
+	return 0;
+}
+
+static int
+xfs_xattr_put_listent_sizes(struct xfs_attr_list_context *context, int flags,
+		char *name, int namelen, int valuelen, char *value)
+{
+	context->count += xfs_xattr_prefix_len(flags) + namelen + 1;
+	return 0;
+}
+
+static int
+list_one_attr(const char *name, const size_t len, void *data,
+		size_t size, ssize_t *result)
+{
+	char *p = data + *result;
+
+	*result += len;
+	if (!size)
+		return 0;
+	if (*result > size)
+		return -ERANGE;
+
+	strcpy(p, name);
+	return 0;
+}
+
+ssize_t
+xfs_vn_listxattr(struct dentry *dentry, char *data, size_t size)
+{
+	struct xfs_attr_list_context context;
+	struct attrlist_cursor_kern cursor = { 0 };
+	struct inode		*inode = dentry->d_inode;
+	int			error;
+
+	/*
+	 * First read the regular on-disk attributes.
+	 */
+	memset(&context, 0, sizeof(context));
+	context.dp = XFS_I(inode);
+	context.cursor = &cursor;
+	context.resynch = 1;
+	context.alist = data;
+	context.bufsize = size;
+	context.firstu = context.bufsize;
+
+	if (size)
+		context.put_listent = xfs_xattr_put_listent;
+	else
+		context.put_listent = xfs_xattr_put_listent_sizes;
+
+	xfs_attr_list_int(&context);
+	if (context.count < 0)
+		return -ERANGE;
+
+	/*
+	 * Then add the two synthetic ACL attributes.
+	 */
+	if (xfs_acl_vhasacl_access(inode)) {
+		error = list_one_attr(POSIX_ACL_XATTR_ACCESS,
+				strlen(POSIX_ACL_XATTR_ACCESS) + 1,
+				data, size, &context.count);
+		if (error)
+			return error;
+	}
+
+	if (xfs_acl_vhasacl_default(inode)) {
+		error = list_one_attr(POSIX_ACL_XATTR_DEFAULT,
+				strlen(POSIX_ACL_XATTR_DEFAULT) + 1,
+				data, size, &context.count);
+		if (error)
+			return error;
+	}
+
+	return context.count;
+}
diff --git a/fs/xfs/quota/xfs_dquot.c b/fs/xfs/quota/xfs_dquot.c
index 85df3288efd5..f2705f2fd43c 100644
--- a/fs/xfs/quota/xfs_dquot.c
+++ b/fs/xfs/quota/xfs_dquot.c
@@ -101,11 +101,18 @@ xfs_qm_dqinit(
 	if (brandnewdquot) {
 		dqp->dq_flnext = dqp->dq_flprev = dqp;
 		mutex_init(&dqp->q_qlock);
-		initnsema(&dqp->q_flock, 1, "fdq");
 		sv_init(&dqp->q_pinwait, SV_DEFAULT, "pdq");
 
+		/*
+		 * Because we want to use a counting completion, complete
+		 * the flush completion once to allow a single access to
+		 * the flush completion without blocking.
+		 */
+		init_completion(&dqp->q_flush);
+		complete(&dqp->q_flush);
+
 #ifdef XFS_DQUOT_TRACE
-		dqp->q_trace = ktrace_alloc(DQUOT_TRACE_SIZE, KM_SLEEP);
+		dqp->q_trace = ktrace_alloc(DQUOT_TRACE_SIZE, KM_NOFS);
 		xfs_dqtrace_entry(dqp, "DQINIT");
 #endif
 	} else {
@@ -150,7 +157,6 @@ xfs_qm_dqdestroy(
 	ASSERT(! XFS_DQ_IS_ON_FREELIST(dqp));
 
 	mutex_destroy(&dqp->q_qlock);
-	freesema(&dqp->q_flock);
 	sv_destroy(&dqp->q_pinwait);
 
 #ifdef XFS_DQUOT_TRACE
@@ -431,7 +437,7 @@ xfs_qm_dqalloc(
 	 * when it unlocks the inode. Since we want to keep the quota
 	 * inode around, we bump the vnode ref count now.
 	 */
-	VN_HOLD(XFS_ITOV(quotip));
+	IHOLD(quotip);
 
 	xfs_trans_ijoin(tp, quotip, XFS_ILOCK_EXCL);
 	nmaps = 1;
@@ -1211,7 +1217,7 @@ xfs_qm_dqflush(
 	int			error;
 
 	ASSERT(XFS_DQ_IS_LOCKED(dqp));
-	ASSERT(XFS_DQ_IS_FLUSH_LOCKED(dqp));
+	ASSERT(!completion_done(&dqp->q_flush));
 	xfs_dqtrace_entry(dqp, "DQFLUSH");
 
 	/*
@@ -1348,34 +1354,18 @@ xfs_qm_dqflush_done(
 	xfs_dqfunlock(dqp);
 }
 
-
-int
-xfs_qm_dqflock_nowait(
-	xfs_dquot_t *dqp)
-{
-	int locked;
-
-	locked = cpsema(&((dqp)->q_flock));
-
-	/* XXX ifdef these out */
-	if (locked)
-		(dqp)->dq_flags |= XFS_DQ_FLOCKED;
-	return (locked);
-}
-
-
 int
 xfs_qm_dqlock_nowait(
 	xfs_dquot_t *dqp)
 {
-	return (mutex_trylock(&((dqp)->q_qlock)));
+	return mutex_trylock(&dqp->q_qlock);
 }
 
 void
 xfs_dqlock(
 	xfs_dquot_t *dqp)
 {
-	mutex_lock(&(dqp->q_qlock));
+	mutex_lock(&dqp->q_qlock);
 }
 
 void
@@ -1435,8 +1425,7 @@ xfs_dqlock2(
 /* ARGSUSED */
 int
 xfs_qm_dqpurge(
-	xfs_dquot_t	*dqp,
-	uint		flags)
+	xfs_dquot_t	*dqp)
 {
 	xfs_dqhash_t	*thishash;
 	xfs_mount_t	*mp = dqp->q_mount;
@@ -1469,7 +1458,7 @@ xfs_qm_dqpurge(
 	 * if we're turning off quotas. Basically, we need this flush
 	 * lock, and are willing to block on it.
 	 */
-	if (! xfs_qm_dqflock_nowait(dqp)) {
+	if (!xfs_dqflock_nowait(dqp)) {
 		/*
 		 * Block on the flush lock after nudging dquot buffer,
 		 * if it is incore.
diff --git a/fs/xfs/quota/xfs_dquot.h b/fs/xfs/quota/xfs_dquot.h
index 5c371a92e3e2..8958d0faf8d3 100644
--- a/fs/xfs/quota/xfs_dquot.h
+++ b/fs/xfs/quota/xfs_dquot.h
@@ -82,7 +82,7 @@ typedef struct xfs_dquot {
 	xfs_qcnt_t	 q_res_icount;	/* total inos allocd+reserved */
 	xfs_qcnt_t	 q_res_rtbcount;/* total realtime blks used+reserved */
 	mutex_t		 q_qlock;	/* quota lock */
-	sema_t		 q_flock;	/* flush lock */
+	struct completion q_flush;	/* flush completion queue */
 	uint		 q_pincount;	/* pin count for this dquot */
 	sv_t		 q_pinwait;	/* sync var for pinning */
 #ifdef XFS_DQUOT_TRACE
@@ -113,17 +113,25 @@ XFS_DQ_IS_LOCKED(xfs_dquot_t *dqp)
 
 
 /*
- * The following three routines simply manage the q_flock
- * semaphore embedded in the dquot.  This semaphore synchronizes
- * processes attempting to flush the in-core dquot back to disk.
+ * Manage the q_flush completion queue embedded in the dquot.  This completion
+ * queue synchronizes processes attempting to flush the in-core dquot back to
+ * disk.
  */
-#define xfs_dqflock(dqp)	 { psema(&((dqp)->q_flock), PINOD | PRECALC);\
-				   (dqp)->dq_flags |= XFS_DQ_FLOCKED; }
-#define xfs_dqfunlock(dqp)	 { ASSERT(issemalocked(&((dqp)->q_flock))); \
-				   vsema(&((dqp)->q_flock)); \
-				   (dqp)->dq_flags &= ~(XFS_DQ_FLOCKED); }
+static inline void xfs_dqflock(xfs_dquot_t *dqp)
+{
+	wait_for_completion(&dqp->q_flush);
+}
+
+static inline int xfs_dqflock_nowait(xfs_dquot_t *dqp)
+{
+	return try_wait_for_completion(&dqp->q_flush);
+}
+
+static inline void xfs_dqfunlock(xfs_dquot_t *dqp)
+{
+	complete(&dqp->q_flush);
+}
 
-#define XFS_DQ_IS_FLUSH_LOCKED(dqp) (issemalocked(&((dqp)->q_flock)))
 #define XFS_DQ_IS_ON_FREELIST(dqp)  ((dqp)->dq_flnext != (dqp))
 #define XFS_DQ_IS_DIRTY(dqp)	((dqp)->dq_flags & XFS_DQ_DIRTY)
 #define XFS_QM_ISUDQ(dqp)	((dqp)->dq_flags & XFS_DQ_USER)
@@ -164,10 +172,9 @@ extern void		xfs_qm_dqprint(xfs_dquot_t *);
 
 extern void		xfs_qm_dqdestroy(xfs_dquot_t *);
 extern int		xfs_qm_dqflush(xfs_dquot_t *, uint);
-extern int		xfs_qm_dqpurge(xfs_dquot_t *, uint);
+extern int		xfs_qm_dqpurge(xfs_dquot_t *);
 extern void		xfs_qm_dqunpin_wait(xfs_dquot_t *);
 extern int		xfs_qm_dqlock_nowait(xfs_dquot_t *);
-extern int		xfs_qm_dqflock_nowait(xfs_dquot_t *);
 extern void		xfs_qm_dqflock_pushbuf_wait(xfs_dquot_t *dqp);
 extern void		xfs_qm_adjust_dqtimers(xfs_mount_t *,
 					xfs_disk_dquot_t *);
diff --git a/fs/xfs/quota/xfs_dquot_item.c b/fs/xfs/quota/xfs_dquot_item.c
index 36e05ca78412..f028644caa5e 100644
--- a/fs/xfs/quota/xfs_dquot_item.c
+++ b/fs/xfs/quota/xfs_dquot_item.c
@@ -151,7 +151,7 @@ xfs_qm_dquot_logitem_push(
 	dqp = logitem->qli_dquot;
 
 	ASSERT(XFS_DQ_IS_LOCKED(dqp));
-	ASSERT(XFS_DQ_IS_FLUSH_LOCKED(dqp));
+	ASSERT(!completion_done(&dqp->q_flush));
 
 	/*
 	 * Since we were able to lock the dquot's flush lock and
@@ -245,7 +245,7 @@ xfs_qm_dquot_logitem_pushbuf(
 	 * inode flush completed and the inode was taken off the AIL.
 	 * So, just get out.
 	 */
-	if (!issemalocked(&(dqp->q_flock))  ||
+	if (completion_done(&dqp->q_flush)  ||
 	    ((qip->qli_item.li_flags & XFS_LI_IN_AIL) == 0)) {
 		qip->qli_pushbuf_flag = 0;
 		xfs_dqunlock(dqp);
@@ -258,7 +258,7 @@ xfs_qm_dquot_logitem_pushbuf(
 	if (bp != NULL) {
 		if (XFS_BUF_ISDELAYWRITE(bp)) {
 			dopush = ((qip->qli_item.li_flags & XFS_LI_IN_AIL) &&
-				  issemalocked(&(dqp->q_flock)));
+				  !completion_done(&dqp->q_flush));
 			qip->qli_pushbuf_flag = 0;
 			xfs_dqunlock(dqp);
 
@@ -317,7 +317,7 @@ xfs_qm_dquot_logitem_trylock(
 		return (XFS_ITEM_LOCKED);
 
 	retval = XFS_ITEM_SUCCESS;
-	if (! xfs_qm_dqflock_nowait(dqp)) {
+	if (!xfs_dqflock_nowait(dqp)) {
 		/*
 		 * The dquot is already being flushed.	It may have been
 		 * flushed delayed write, however, and we don't want to
@@ -576,8 +576,8 @@ xfs_qm_qoffend_logitem_committed(
 	 * xfs_trans_delete_ail() drops the AIL lock.
 	 */
 	xfs_trans_delete_ail(qfs->qql_item.li_mountp, (xfs_log_item_t *)qfs);
-	kmem_free(qfs, sizeof(xfs_qoff_logitem_t));
-	kmem_free(qfe, sizeof(xfs_qoff_logitem_t));
+	kmem_free(qfs);
+	kmem_free(qfe);
 	return (xfs_lsn_t)-1;
 }
 
diff --git a/fs/xfs/quota/xfs_qm.c b/fs/xfs/quota/xfs_qm.c
index d31cce1165c5..df0ffef9775a 100644
--- a/fs/xfs/quota/xfs_qm.c
+++ b/fs/xfs/quota/xfs_qm.c
@@ -192,8 +192,8 @@ xfs_qm_destroy(
 		xfs_qm_list_destroy(&(xqm->qm_usr_dqhtable[i]));
 		xfs_qm_list_destroy(&(xqm->qm_grp_dqhtable[i]));
 	}
-	kmem_free(xqm->qm_usr_dqhtable, hsize * sizeof(xfs_dqhash_t));
-	kmem_free(xqm->qm_grp_dqhtable, hsize * sizeof(xfs_dqhash_t));
+	kmem_free(xqm->qm_usr_dqhtable);
+	kmem_free(xqm->qm_grp_dqhtable);
 	xqm->qm_usr_dqhtable = NULL;
 	xqm->qm_grp_dqhtable = NULL;
 	xqm->qm_dqhashmask = 0;
@@ -201,7 +201,7 @@ xfs_qm_destroy(
 #ifdef DEBUG
 	mutex_destroy(&qcheck_lock);
 #endif
-	kmem_free(xqm, sizeof(xfs_qm_t));
+	kmem_free(xqm);
 }
 
 /*
@@ -310,8 +310,7 @@ xfs_qm_unmount_quotadestroy(
  */
 void
 xfs_qm_mount_quotas(
-	xfs_mount_t	*mp,
-	int		mfsi_flags)
+	xfs_mount_t	*mp)
 {
 	int		error = 0;
 	uint		sbf;
@@ -346,8 +345,7 @@ xfs_qm_mount_quotas(
 	/*
 	 * If any of the quotas are not consistent, do a quotacheck.
 	 */
-	if (XFS_QM_NEED_QUOTACHECK(mp) &&
-	    !(mfsi_flags & XFS_MFSI_NO_QUOTACHECK)) {
+	if (XFS_QM_NEED_QUOTACHECK(mp)) {
 		error = xfs_qm_quotacheck(mp);
 		if (error) {
 			/* Quotacheck failed and disabled quotas. */
@@ -445,11 +443,11 @@ xfs_qm_unmount_quotas(
 		}
 	}
 	if (uqp) {
-		 XFS_PURGE_INODE(uqp);
+		 IRELE(uqp);
 		 mp->m_quotainfo->qi_uquotaip = NULL;
 	}
 	if (gqp) {
-		XFS_PURGE_INODE(gqp);
+		IRELE(gqp);
 		mp->m_quotainfo->qi_gquotaip = NULL;
 	}
 out:
@@ -484,7 +482,7 @@ again:
 		xfs_dqtrace_entry(dqp, "FLUSHALL: DQDIRTY");
 		/* XXX a sentinel would be better */
 		recl = XFS_QI_MPLRECLAIMS(mp);
-		if (! xfs_qm_dqflock_nowait(dqp)) {
+		if (!xfs_dqflock_nowait(dqp)) {
 			/*
 			 * If we can't grab the flush lock then check
 			 * to see if the dquot has been flushed delayed
@@ -631,7 +629,7 @@ xfs_qm_dqpurge_int(
 		 * freelist in INACTIVE state.
 		 */
 		nextdqp = dqp->MPL_NEXT;
-		nmisses += xfs_qm_dqpurge(dqp, flags);
+		nmisses += xfs_qm_dqpurge(dqp);
 		dqp = nextdqp;
 	}
 	xfs_qm_mplist_unlock(mp);
@@ -1062,7 +1060,7 @@ xfs_qm_sync(
 
 		/* XXX a sentinel would be better */
 		recl = XFS_QI_MPLRECLAIMS(mp);
-		if (! xfs_qm_dqflock_nowait(dqp)) {
+		if (!xfs_dqflock_nowait(dqp)) {
 			if (nowait) {
 				xfs_dqunlock(dqp);
 				continue;
@@ -1134,7 +1132,7 @@ xfs_qm_init_quotainfo(
 	 * and change the superblock accordingly.
 	 */
 	if ((error = xfs_qm_init_quotainos(mp))) {
-		kmem_free(qinf, sizeof(xfs_quotainfo_t));
+		kmem_free(qinf);
 		mp->m_quotainfo = NULL;
 		return error;
 	}
@@ -1240,15 +1238,15 @@ xfs_qm_destroy_quotainfo(
 	xfs_qm_list_destroy(&qi->qi_dqlist);
 
 	if (qi->qi_uquotaip) {
-		XFS_PURGE_INODE(qi->qi_uquotaip);
+		IRELE(qi->qi_uquotaip);
 		qi->qi_uquotaip = NULL; /* paranoia */
 	}
 	if (qi->qi_gquotaip) {
-		XFS_PURGE_INODE(qi->qi_gquotaip);
+		IRELE(qi->qi_gquotaip);
 		qi->qi_gquotaip = NULL;
 	}
 	mutex_destroy(&qi->qi_quotaofflock);
-	kmem_free(qi, sizeof(xfs_quotainfo_t));
+	kmem_free(qi);
 	mp->m_quotainfo = NULL;
 }
 
@@ -1394,7 +1392,7 @@ xfs_qm_qino_alloc(
 	 * locked exclusively and joined to the transaction already.
 	 */
 	ASSERT(xfs_isilocked(*ip, XFS_ILOCK_EXCL));
-	VN_HOLD(XFS_ITOV((*ip)));
+	IHOLD(*ip);
 
 	/*
 	 * Make the changes in the superblock, and log those too.
@@ -1623,7 +1621,7 @@ xfs_qm_dqiterate(
 			break;
 	} while (nmaps > 0);
 
-	kmem_free(map, XFS_DQITER_MAP_SIZE * sizeof(*map));
+	kmem_free(map);
 
 	return error;
 }
@@ -2079,7 +2077,7 @@ xfs_qm_shake_freelist(
 		 * Try to grab the flush lock. If this dquot is in the process of
 		 * getting flushed to disk, we don't want to reclaim it.
 		 */
-		if (! xfs_qm_dqflock_nowait(dqp)) {
+		if (!xfs_dqflock_nowait(dqp)) {
 			xfs_dqunlock(dqp);
 			dqp = dqp->dq_flnext;
 			continue;
@@ -2257,7 +2255,7 @@ xfs_qm_dqreclaim_one(void)
 		 * Try to grab the flush lock. If this dquot is in the process of
 		 * getting flushed to disk, we don't want to reclaim it.
 		 */
-		if (! xfs_qm_dqflock_nowait(dqp)) {
+		if (!xfs_dqflock_nowait(dqp)) {
 			xfs_dqunlock(dqp);
 			continue;
 		}
diff --git a/fs/xfs/quota/xfs_qm.h b/fs/xfs/quota/xfs_qm.h
index cd2300e374af..44f25349e478 100644
--- a/fs/xfs/quota/xfs_qm.h
+++ b/fs/xfs/quota/xfs_qm.h
@@ -165,7 +165,7 @@ typedef struct xfs_dquot_acct {
 #define XFS_QM_RELE(xqm)	((xqm)->qm_nrefs--)
 
 extern void		xfs_qm_destroy_quotainfo(xfs_mount_t *);
-extern void		xfs_qm_mount_quotas(xfs_mount_t *, int);
+extern void		xfs_qm_mount_quotas(xfs_mount_t *);
 extern int		xfs_qm_quotacheck(xfs_mount_t *);
 extern void		xfs_qm_unmount_quotadestroy(xfs_mount_t *);
 extern int		xfs_qm_unmount_quotas(xfs_mount_t *);
diff --git a/fs/xfs/quota/xfs_qm_bhv.c b/fs/xfs/quota/xfs_qm_bhv.c
index f4f6c4c861d7..eea2e60b456b 100644
--- a/fs/xfs/quota/xfs_qm_bhv.c
+++ b/fs/xfs/quota/xfs_qm_bhv.c
@@ -162,7 +162,7 @@ xfs_qm_newmount(
 			 * mounting, and get on with the boring life
 			 * without disk quotas.
 			 */
-			xfs_qm_mount_quotas(mp, 0);
+			xfs_qm_mount_quotas(mp);
 		} else {
 			/*
 			 * Clear the quota flags, but remember them. This
@@ -184,13 +184,12 @@ STATIC int
 xfs_qm_endmount(
 	xfs_mount_t	*mp,
 	uint		needquotamount,
-	uint		quotaflags,
-	int		mfsi_flags)
+	uint		quotaflags)
 {
 	if (needquotamount) {
 		ASSERT(mp->m_qflags == 0);
 		mp->m_qflags = quotaflags;
-		xfs_qm_mount_quotas(mp, mfsi_flags);
+		xfs_qm_mount_quotas(mp);
 	}
 
 #if defined(DEBUG) && defined(XFS_LOUD_RECOVERY)
diff --git a/fs/xfs/quota/xfs_qm_syscalls.c b/fs/xfs/quota/xfs_qm_syscalls.c
index 768a3b27d2b6..1a3b803dfa55 100644
--- a/fs/xfs/quota/xfs_qm_syscalls.c
+++ b/fs/xfs/quota/xfs_qm_syscalls.c
@@ -362,11 +362,11 @@ xfs_qm_scall_quotaoff(
 	 * if we don't need them anymore.
 	 */
 	if ((dqtype & XFS_QMOPT_UQUOTA) && XFS_QI_UQIP(mp)) {
-		XFS_PURGE_INODE(XFS_QI_UQIP(mp));
+		IRELE(XFS_QI_UQIP(mp));
 		XFS_QI_UQIP(mp) = NULL;
 	}
 	if ((dqtype & (XFS_QMOPT_GQUOTA|XFS_QMOPT_PQUOTA)) && XFS_QI_GQIP(mp)) {
-		XFS_PURGE_INODE(XFS_QI_GQIP(mp));
+		IRELE(XFS_QI_GQIP(mp));
 		XFS_QI_GQIP(mp) = NULL;
 	}
 out_error:
@@ -1034,7 +1034,7 @@ xfs_qm_dqrele_all_inodes(
 {
 	xfs_inode_t	*ip, *topino;
 	uint		ireclaims;
-	bhv_vnode_t	*vp;
+	struct inode	*vp;
 	boolean_t	vnode_refd;
 
 	ASSERT(mp->m_quotainfo);
@@ -1059,7 +1059,7 @@ again:
 			ip = ip->i_mnext;
 			continue;
 		}
-		vp = XFS_ITOV_NULL(ip);
+		vp = VFS_I(ip);
 		if (!vp) {
 			ASSERT(ip->i_udquot == NULL);
 			ASSERT(ip->i_gdquot == NULL);
@@ -1449,14 +1449,14 @@ xfs_qm_internalqcheck(
 		for (d = (xfs_dqtest_t *) h1->qh_next; d != NULL; ) {
 			xfs_dqtest_cmp(d);
 			e = (xfs_dqtest_t *) d->HL_NEXT;
-			kmem_free(d, sizeof(xfs_dqtest_t));
+			kmem_free(d);
 			d = e;
 		}
 		h1 = &qmtest_gdqtab[i];
 		for (d = (xfs_dqtest_t *) h1->qh_next; d != NULL; ) {
 			xfs_dqtest_cmp(d);
 			e = (xfs_dqtest_t *) d->HL_NEXT;
-			kmem_free(d, sizeof(xfs_dqtest_t));
+			kmem_free(d);
 			d = e;
 		}
 	}
@@ -1467,8 +1467,8 @@ xfs_qm_internalqcheck(
 	} else {
 		cmn_err(CE_DEBUG, "******** quotacheck successful! ********");
 	}
-	kmem_free(qmtest_udqtab, qmtest_hashmask * sizeof(xfs_dqhash_t));
-	kmem_free(qmtest_gdqtab, qmtest_hashmask * sizeof(xfs_dqhash_t));
+	kmem_free(qmtest_udqtab);
+	kmem_free(qmtest_gdqtab);
 	mutex_unlock(&qcheck_lock);
 	return (qmtest_nfails);
 }
diff --git a/fs/xfs/quota/xfs_quota_priv.h b/fs/xfs/quota/xfs_quota_priv.h
index 5e4a40b1c565..c4fcea600bc2 100644
--- a/fs/xfs/quota/xfs_quota_priv.h
+++ b/fs/xfs/quota/xfs_quota_priv.h
@@ -158,9 +158,6 @@ for ((dqp) = (qlist)->qh_next; (dqp) != (xfs_dquot_t *)(qlist); \
 #define XFS_IS_SUSER_DQUOT(dqp)		\
 	(!((dqp)->q_core.d_id))
 
-#define XFS_PURGE_INODE(ip)		\
-	IRELE(ip);
-
 #define DQFLAGTO_TYPESTR(d)	(((d)->dq_flags & XFS_DQ_USER) ? "USR" : \
 				 (((d)->dq_flags & XFS_DQ_GROUP) ? "GRP" : \
 				 (((d)->dq_flags & XFS_DQ_PROJ) ? "PRJ":"???")))
diff --git a/fs/xfs/support/ktrace.c b/fs/xfs/support/ktrace.c
index 0b75d302508f..a34ef05489b1 100644
--- a/fs/xfs/support/ktrace.c
+++ b/fs/xfs/support/ktrace.c
@@ -89,7 +89,7 @@ ktrace_alloc(int nentries, unsigned int __nocast sleep)
 		if (sleep & KM_SLEEP)
 			panic("ktrace_alloc: NULL memory on KM_SLEEP request!");
 
-		kmem_free(ktp, sizeof(*ktp));
+		kmem_free(ktp);
 
 		return NULL;
 	}
@@ -126,7 +126,7 @@ ktrace_free(ktrace_t *ktp)
 	} else {
 		entries_size = (int)(ktp->kt_nentries * sizeof(ktrace_entry_t));
 
-		kmem_free(ktp->kt_entries, entries_size);
+		kmem_free(ktp->kt_entries);
 	}
 
 	kmem_zone_free(ktrace_hdr_zone, ktp);
diff --git a/fs/xfs/support/uuid.c b/fs/xfs/support/uuid.c
index 493a6ecf8590..5830c040ea7e 100644
--- a/fs/xfs/support/uuid.c
+++ b/fs/xfs/support/uuid.c
@@ -17,7 +17,7 @@
  */
 #include <xfs.h>
 
-static mutex_t	uuid_monitor;
+static DEFINE_MUTEX(uuid_monitor);
 static int	uuid_table_size;
 static uuid_t	*uuid_table;
 
@@ -132,9 +132,3 @@ uuid_table_remove(uuid_t *uuid)
 	ASSERT(i < uuid_table_size);
 	mutex_unlock(&uuid_monitor);
 }
-
-void __init
-uuid_init(void)
-{
-	mutex_init(&uuid_monitor);
-}
diff --git a/fs/xfs/support/uuid.h b/fs/xfs/support/uuid.h
index b6f5922199ba..cff5b607d445 100644
--- a/fs/xfs/support/uuid.h
+++ b/fs/xfs/support/uuid.h
@@ -22,7 +22,6 @@ typedef struct {
 	unsigned char	__u_bits[16];
 } uuid_t;
 
-extern void uuid_init(void);
 extern void uuid_create_nil(uuid_t *uuid);
 extern int uuid_is_nil(uuid_t *uuid);
 extern int uuid_equal(uuid_t *uuid1, uuid_t *uuid2);
diff --git a/fs/xfs/xfs_acl.c b/fs/xfs/xfs_acl.c
index ebee3a4f703a..b2f639a1416f 100644
--- a/fs/xfs/xfs_acl.c
+++ b/fs/xfs/xfs_acl.c
@@ -37,15 +37,15 @@
 #include <linux/capability.h>
 #include <linux/posix_acl_xattr.h>
 
-STATIC int	xfs_acl_setmode(bhv_vnode_t *, xfs_acl_t *, int *);
+STATIC int	xfs_acl_setmode(struct inode *, xfs_acl_t *, int *);
 STATIC void     xfs_acl_filter_mode(mode_t, xfs_acl_t *);
 STATIC void	xfs_acl_get_endian(xfs_acl_t *);
 STATIC int	xfs_acl_access(uid_t, gid_t, xfs_acl_t *, mode_t, cred_t *);
 STATIC int	xfs_acl_invalid(xfs_acl_t *);
 STATIC void	xfs_acl_sync_mode(mode_t, xfs_acl_t *);
-STATIC void	xfs_acl_get_attr(bhv_vnode_t *, xfs_acl_t *, int, int, int *);
-STATIC void	xfs_acl_set_attr(bhv_vnode_t *, xfs_acl_t *, int, int *);
-STATIC int	xfs_acl_allow_set(bhv_vnode_t *, int);
+STATIC void	xfs_acl_get_attr(struct inode *, xfs_acl_t *, int, int, int *);
+STATIC void	xfs_acl_set_attr(struct inode *, xfs_acl_t *, int, int *);
+STATIC int	xfs_acl_allow_set(struct inode *, int);
 
 kmem_zone_t *xfs_acl_zone;
 
@@ -55,7 +55,7 @@ kmem_zone_t *xfs_acl_zone;
  */
 int
 xfs_acl_vhasacl_access(
-	bhv_vnode_t	*vp)
+	struct inode	*vp)
 {
 	int		error;
 
@@ -68,7 +68,7 @@ xfs_acl_vhasacl_access(
  */
 int
 xfs_acl_vhasacl_default(
-	bhv_vnode_t	*vp)
+	struct inode	*vp)
 {
 	int		error;
 
@@ -207,7 +207,7 @@ posix_acl_xfs_to_xattr(
 
 int
 xfs_acl_vget(
-	bhv_vnode_t	*vp,
+	struct inode	*vp,
 	void		*acl,
 	size_t		size,
 	int		kind)
@@ -217,7 +217,6 @@ xfs_acl_vget(
 	posix_acl_xattr_header	*ext_acl = acl;
 	int			flags = 0;
 
-	VN_HOLD(vp);
 	if(size) {
 		if (!(_ACL_ALLOC(xfs_acl))) {
 			error = ENOMEM;
@@ -239,11 +238,10 @@ xfs_acl_vget(
 			goto out;
 		}
 		if (kind == _ACL_TYPE_ACCESS)
-			xfs_acl_sync_mode(xfs_vtoi(vp)->i_d.di_mode, xfs_acl);
+			xfs_acl_sync_mode(XFS_I(vp)->i_d.di_mode, xfs_acl);
 		error = -posix_acl_xfs_to_xattr(xfs_acl, ext_acl, size);
 	}
 out:
-	VN_RELE(vp);
 	if(xfs_acl)
 		_ACL_FREE(xfs_acl);
 	return -error;
@@ -251,28 +249,26 @@ out:
 
 int
 xfs_acl_vremove(
-	bhv_vnode_t	*vp,
+	struct inode	*vp,
 	int		kind)
 {
 	int		error;
 
-	VN_HOLD(vp);
 	error = xfs_acl_allow_set(vp, kind);
 	if (!error) {
-		error = xfs_attr_remove(xfs_vtoi(vp),
+		error = xfs_attr_remove(XFS_I(vp),
 						kind == _ACL_TYPE_DEFAULT?
 						SGI_ACL_DEFAULT: SGI_ACL_FILE,
 						ATTR_ROOT);
 		if (error == ENOATTR)
 			error = 0;	/* 'scool */
 	}
-	VN_RELE(vp);
 	return -error;
 }
 
 int
 xfs_acl_vset(
-	bhv_vnode_t		*vp,
+	struct inode		*vp,
 	void			*acl,
 	size_t			size,
 	int			kind)
@@ -298,7 +294,6 @@ xfs_acl_vset(
 		return 0;
 	}
 
-	VN_HOLD(vp);
 	error = xfs_acl_allow_set(vp, kind);
 
 	/* Incoming ACL exists, set file mode based on its value */
@@ -321,7 +316,6 @@ xfs_acl_vset(
 	}
 
 out:
-	VN_RELE(vp);
 	_ACL_FREE(xfs_acl);
 	return -error;
 }
@@ -341,8 +335,7 @@ xfs_acl_iaccess(
 
 	/* If the file has no ACL return -1. */
 	rval = sizeof(xfs_acl_t);
-	if (xfs_attr_fetch(ip, &acl_name, (char *)acl, &rval,
-					ATTR_ROOT | ATTR_KERNACCESS)) {
+	if (xfs_attr_fetch(ip, &acl_name, (char *)acl, &rval, ATTR_ROOT)) {
 		_ACL_FREE(acl);
 		return -1;
 	}
@@ -364,7 +357,7 @@ xfs_acl_iaccess(
 
 STATIC int
 xfs_acl_allow_set(
-	bhv_vnode_t	*vp,
+	struct inode	*vp,
 	int		kind)
 {
 	if (vp->i_flags & (S_IMMUTABLE|S_APPEND))
@@ -373,7 +366,7 @@ xfs_acl_allow_set(
 		return ENOTDIR;
 	if (vp->i_sb->s_flags & MS_RDONLY)
 		return EROFS;
-	if (xfs_vtoi(vp)->i_d.di_uid != current->fsuid && !capable(CAP_FOWNER))
+	if (XFS_I(vp)->i_d.di_uid != current->fsuid && !capable(CAP_FOWNER))
 		return EPERM;
 	return 0;
 }
@@ -567,7 +560,7 @@ xfs_acl_get_endian(
  */
 STATIC void
 xfs_acl_get_attr(
-	bhv_vnode_t	*vp,
+	struct inode	*vp,
 	xfs_acl_t	*aclp,
 	int		kind,
 	int		flags,
@@ -577,7 +570,7 @@ xfs_acl_get_attr(
 
 	ASSERT((flags & ATTR_KERNOVAL) ? (aclp == NULL) : 1);
 	flags |= ATTR_ROOT;
-	*error = xfs_attr_get(xfs_vtoi(vp),
+	*error = xfs_attr_get(XFS_I(vp),
 					kind == _ACL_TYPE_ACCESS ?
 					SGI_ACL_FILE : SGI_ACL_DEFAULT,
 					(char *)aclp, &len, flags);
@@ -591,7 +584,7 @@ xfs_acl_get_attr(
  */
 STATIC void
 xfs_acl_set_attr(
-	bhv_vnode_t	*vp,
+	struct inode	*vp,
 	xfs_acl_t	*aclp,
 	int		kind,
 	int		*error)
@@ -616,7 +609,7 @@ xfs_acl_set_attr(
 		INT_SET(newace->ae_perm, ARCH_CONVERT, ace->ae_perm);
 	}
 	INT_SET(newacl->acl_cnt, ARCH_CONVERT, aclp->acl_cnt);
-	*error = xfs_attr_set(xfs_vtoi(vp),
+	*error = xfs_attr_set(XFS_I(vp),
 				kind == _ACL_TYPE_ACCESS ?
 				SGI_ACL_FILE: SGI_ACL_DEFAULT,
 				(char *)newacl, len, ATTR_ROOT);
@@ -625,7 +618,7 @@ xfs_acl_set_attr(
 
 int
 xfs_acl_vtoacl(
-	bhv_vnode_t	*vp,
+	struct inode	*vp,
 	xfs_acl_t	*access_acl,
 	xfs_acl_t	*default_acl)
 {
@@ -640,7 +633,7 @@ xfs_acl_vtoacl(
 		if (error)
 			access_acl->acl_cnt = XFS_ACL_NOT_PRESENT;
 		else /* We have a good ACL and the file mode, synchronize. */
-			xfs_acl_sync_mode(xfs_vtoi(vp)->i_d.di_mode, access_acl);
+			xfs_acl_sync_mode(XFS_I(vp)->i_d.di_mode, access_acl);
 	}
 
 	if (default_acl) {
@@ -657,7 +650,7 @@ xfs_acl_vtoacl(
  */
 int
 xfs_acl_inherit(
-	bhv_vnode_t	*vp,
+	struct inode	*vp,
 	mode_t		mode,
 	xfs_acl_t	*pdaclp)
 {
@@ -716,11 +709,11 @@ out_error:
  */
 STATIC int
 xfs_acl_setmode(
-	bhv_vnode_t	*vp,
+	struct inode	*vp,
 	xfs_acl_t	*acl,
 	int		*basicperms)
 {
-	bhv_vattr_t	va;
+	struct iattr	iattr;
 	xfs_acl_entry_t	*ap;
 	xfs_acl_entry_t	*gap = NULL;
 	int		i, nomask = 1;
@@ -734,25 +727,25 @@ xfs_acl_setmode(
 	 * Copy the u::, g::, o::, and m:: bits from the ACL into the
 	 * mode.  The m:: bits take precedence over the g:: bits.
 	 */
-	va.va_mask = XFS_AT_MODE;
-	va.va_mode = xfs_vtoi(vp)->i_d.di_mode;
-	va.va_mode &= ~(S_IRWXU|S_IRWXG|S_IRWXO);
+	iattr.ia_valid = ATTR_MODE;
+	iattr.ia_mode = XFS_I(vp)->i_d.di_mode;
+	iattr.ia_mode &= ~(S_IRWXU|S_IRWXG|S_IRWXO);
 	ap = acl->acl_entry;
 	for (i = 0; i < acl->acl_cnt; ++i) {
 		switch (ap->ae_tag) {
 		case ACL_USER_OBJ:
-			va.va_mode |= ap->ae_perm << 6;
+			iattr.ia_mode |= ap->ae_perm << 6;
 			break;
 		case ACL_GROUP_OBJ:
 			gap = ap;
 			break;
 		case ACL_MASK:	/* more than just standard modes */
 			nomask = 0;
-			va.va_mode |= ap->ae_perm << 3;
+			iattr.ia_mode |= ap->ae_perm << 3;
 			*basicperms = 0;
 			break;
 		case ACL_OTHER:
-			va.va_mode |= ap->ae_perm;
+			iattr.ia_mode |= ap->ae_perm;
 			break;
 		default:	/* more than just standard modes */
 			*basicperms = 0;
@@ -763,9 +756,9 @@ xfs_acl_setmode(
 
 	/* Set the group bits from ACL_GROUP_OBJ if there's no ACL_MASK */
 	if (gap && nomask)
-		va.va_mode |= gap->ae_perm << 3;
+		iattr.ia_mode |= gap->ae_perm << 3;
 
-	return xfs_setattr(xfs_vtoi(vp), &va, 0, sys_cred);
+	return xfs_setattr(XFS_I(vp), &iattr, 0, sys_cred);
 }
 
 /*
diff --git a/fs/xfs/xfs_acl.h b/fs/xfs/xfs_acl.h
index 332a772461c4..a4e293b93efa 100644
--- a/fs/xfs/xfs_acl.h
+++ b/fs/xfs/xfs_acl.h
@@ -46,6 +46,8 @@ typedef struct xfs_acl {
 #define SGI_ACL_FILE_SIZE	(sizeof(SGI_ACL_FILE)-1)
 #define SGI_ACL_DEFAULT_SIZE	(sizeof(SGI_ACL_DEFAULT)-1)
 
+#define _ACL_TYPE_ACCESS	1
+#define _ACL_TYPE_DEFAULT	2
 
 #ifdef CONFIG_XFS_POSIX_ACL
 
@@ -57,17 +59,15 @@ extern struct kmem_zone *xfs_acl_zone;
 		(zone) = kmem_zone_init(sizeof(xfs_acl_t), (name))
 #define xfs_acl_zone_destroy(zone)	kmem_zone_destroy(zone)
 
-extern int xfs_acl_inherit(bhv_vnode_t *, mode_t mode, xfs_acl_t *);
+extern int xfs_acl_inherit(struct inode *, mode_t mode, xfs_acl_t *);
 extern int xfs_acl_iaccess(struct xfs_inode *, mode_t, cred_t *);
-extern int xfs_acl_vtoacl(bhv_vnode_t *, xfs_acl_t *, xfs_acl_t *);
-extern int xfs_acl_vhasacl_access(bhv_vnode_t *);
-extern int xfs_acl_vhasacl_default(bhv_vnode_t *);
-extern int xfs_acl_vset(bhv_vnode_t *, void *, size_t, int);
-extern int xfs_acl_vget(bhv_vnode_t *, void *, size_t, int);
-extern int xfs_acl_vremove(bhv_vnode_t *, int);
+extern int xfs_acl_vtoacl(struct inode *, xfs_acl_t *, xfs_acl_t *);
+extern int xfs_acl_vhasacl_access(struct inode *);
+extern int xfs_acl_vhasacl_default(struct inode *);
+extern int xfs_acl_vset(struct inode *, void *, size_t, int);
+extern int xfs_acl_vget(struct inode *, void *, size_t, int);
+extern int xfs_acl_vremove(struct inode *, int);
 
-#define _ACL_TYPE_ACCESS	1
-#define _ACL_TYPE_DEFAULT	2
 #define _ACL_PERM_INVALID(perm)	((perm) & ~(ACL_READ|ACL_WRITE|ACL_EXECUTE))
 
 #define _ACL_INHERIT(c,m,d)	(xfs_acl_inherit(c,m,d))
diff --git a/fs/xfs/xfs_arch.h b/fs/xfs/xfs_arch.h
index f9472a2076d4..0b3b5efe848c 100644
--- a/fs/xfs/xfs_arch.h
+++ b/fs/xfs/xfs_arch.h
@@ -92,16 +92,6 @@
 	((__u8*)(pointer))[1] = (((value)     ) & 0xff); \
     }
 
-/* define generic INT_ macros */
-
-#define INT_GET(reference,arch) \
-    (((arch) == ARCH_NOCONVERT) \
-	? \
-	    (reference) \
-	: \
-	    INT_SWAP((reference),(reference)) \
-    )
-
 /* does not return a value */
 #define INT_SET(reference,arch,valueref) \
     (__builtin_constant_p(valueref) ? \
@@ -112,64 +102,6 @@
 	) \
     )
 
-/* does not return a value */
-#define INT_MOD_EXPR(reference,arch,code) \
-    (((arch) == ARCH_NOCONVERT) \
-	? \
-	    (void)((reference) code) \
-	: \
-	    (void)( \
-		(reference) = INT_GET((reference),arch) , \
-		((reference) code), \
-		INT_SET(reference, arch, reference) \
-	    ) \
-    )
-
-/* does not return a value */
-#define INT_MOD(reference,arch,delta) \
-    (void)( \
-	INT_MOD_EXPR(reference,arch,+=(delta)) \
-    )
-
-/*
- * INT_COPY - copy a value between two locations with the
- *	      _same architecture_ but _potentially different sizes_
- *
- *	    if the types of the two parameters are equal or they are
- *		in native architecture, a simple copy is done
- *
- *	    otherwise, architecture conversions are done
- *
- */
-
-/* does not return a value */
-#define INT_COPY(dst,src,arch) \
-    ( \
-	((sizeof(dst) == sizeof(src)) || ((arch) == ARCH_NOCONVERT)) \
-	    ? \
-		(void)((dst) = (src)) \
-	    : \
-		INT_SET(dst, arch, INT_GET(src, arch)) \
-    )
-
-/*
- * INT_XLATE - copy a value in either direction between two locations
- *	       with different architectures
- *
- *		    dir < 0	- copy from memory to buffer (native to arch)
- *		    dir > 0	- copy from buffer to memory (arch to native)
- */
-
-/* does not return a value */
-#define INT_XLATE(buf,mem,dir,arch) {\
-    ASSERT(dir); \
-    if (dir>0) { \
-	(mem)=INT_GET(buf, arch); \
-    } else { \
-	INT_SET(buf, arch, mem); \
-    } \
-}
-
 /*
  * In directories inode numbers are stored as unaligned arrays of unsigned
  * 8bit integers on disk.
diff --git a/fs/xfs/xfs_attr.c b/fs/xfs/xfs_attr.c
index df151a859186..f7cdc28aff41 100644
--- a/fs/xfs/xfs_attr.c
+++ b/fs/xfs/xfs_attr.c
@@ -16,8 +16,6 @@
  * Inc.,  51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
  */
 
-#include <linux/capability.h>
-
 #include "xfs.h"
 #include "xfs_fs.h"
 #include "xfs_types.h"
@@ -57,11 +55,6 @@
  * Provide the external interfaces to manage attribute lists.
  */
 
-#define ATTR_SYSCOUNT	2
-static struct attrnames posix_acl_access;
-static struct attrnames posix_acl_default;
-static struct attrnames *attr_system_names[ATTR_SYSCOUNT];
-
 /*========================================================================
  * Function prototypes for the kernel.
  *========================================================================*/
@@ -116,6 +109,17 @@ xfs_attr_name_to_xname(
 	return 0;
 }
 
+STATIC int
+xfs_inode_hasattr(
+	struct xfs_inode	*ip)
+{
+	if (!XFS_IFORK_Q(ip) ||
+	    (ip->i_d.di_aformat == XFS_DINODE_FMT_EXTENTS &&
+	     ip->i_d.di_anextents == 0))
+		return 0;
+	return 1;
+}
+
 /*========================================================================
  * Overall external interface routines.
  *========================================================================*/
@@ -127,10 +131,8 @@ xfs_attr_fetch(xfs_inode_t *ip, struct xfs_name *name,
 	xfs_da_args_t   args;
 	int             error;
 
-	if ((XFS_IFORK_Q(ip) == 0) ||
-	    (ip->i_d.di_aformat == XFS_DINODE_FMT_EXTENTS &&
-	     ip->i_d.di_anextents == 0))
-		return(ENOATTR);
+	if (!xfs_inode_hasattr(ip))
+		return ENOATTR;
 
 	/*
 	 * Fill in the arg structure for this request.
@@ -148,11 +150,7 @@ xfs_attr_fetch(xfs_inode_t *ip, struct xfs_name *name,
 	/*
 	 * Decide on what work routines to call based on the inode size.
 	 */
-	if (XFS_IFORK_Q(ip) == 0 ||
-	    (ip->i_d.di_aformat == XFS_DINODE_FMT_EXTENTS &&
-	     ip->i_d.di_anextents == 0)) {
-		error = XFS_ERROR(ENOATTR);
-	} else if (ip->i_d.di_aformat == XFS_DINODE_FMT_LOCAL) {
+	if (ip->i_d.di_aformat == XFS_DINODE_FMT_LOCAL) {
 		error = xfs_attr_shortform_getvalue(&args);
 	} else if (xfs_bmap_one_block(ip, XFS_ATTR_FORK)) {
 		error = xfs_attr_leaf_get(&args);
@@ -196,6 +194,46 @@ xfs_attr_get(
 	return(error);
 }
 
+/*
+ * Calculate how many blocks we need for the new attribute,
+ */
+int
+xfs_attr_calc_size(
+	struct xfs_inode 	*ip,
+	int			namelen,
+	int			valuelen,
+	int			*local)
+{
+	struct xfs_mount 	*mp = ip->i_mount;
+	int			size;
+	int			nblks;
+
+	/*
+	 * Determine space new attribute will use, and if it would be
+	 * "local" or "remote" (note: local != inline).
+	 */
+	size = xfs_attr_leaf_newentsize(namelen, valuelen,
+					mp->m_sb.sb_blocksize, local);
+
+	nblks = XFS_DAENTER_SPACE_RES(mp, XFS_ATTR_FORK);
+	if (*local) {
+		if (size > (mp->m_sb.sb_blocksize >> 1)) {
+			/* Double split possible */
+			nblks *= 2;
+		}
+	} else {
+		/*
+		 * Out of line attribute, cannot double split, but
+		 * make room for the attribute value itself.
+		 */
+		uint	dblocks = XFS_B_TO_FSB(mp, valuelen);
+		nblks += dblocks;
+		nblks += XFS_NEXTENTADD_SPACE_RES(mp, dblocks, XFS_ATTR_FORK);
+	}
+
+	return nblks;
+}
+
 STATIC int
 xfs_attr_set_int(xfs_inode_t *dp, struct xfs_name *name,
 		char *value, int valuelen, int flags)
@@ -204,10 +242,9 @@ xfs_attr_set_int(xfs_inode_t *dp, struct xfs_name *name,
 	xfs_fsblock_t	firstblock;
 	xfs_bmap_free_t flist;
 	int		error, err2, committed;
-	int		local, size;
-	uint		nblks;
 	xfs_mount_t	*mp = dp->i_mount;
 	int             rsvd = (flags & ATTR_ROOT) != 0;
+	int		local;
 
 	/*
 	 * Attach the dquots to the inode.
@@ -241,33 +278,10 @@ xfs_attr_set_int(xfs_inode_t *dp, struct xfs_name *name,
 	args.firstblock = &firstblock;
 	args.flist = &flist;
 	args.whichfork = XFS_ATTR_FORK;
-	args.addname = 1;
-	args.oknoent = 1;
-
-	/*
-	 * Determine space new attribute will use, and if it would be
-	 * "local" or "remote" (note: local != inline).
-	 */
-	size = xfs_attr_leaf_newentsize(name->len, valuelen,
-					mp->m_sb.sb_blocksize, &local);
-
-	nblks = XFS_DAENTER_SPACE_RES(mp, XFS_ATTR_FORK);
-	if (local) {
-		if (size > (mp->m_sb.sb_blocksize >> 1)) {
-			/* Double split possible */
-			nblks <<= 1;
-		}
-	} else {
-		uint	dblocks = XFS_B_TO_FSB(mp, valuelen);
-		/* Out of line attribute, cannot double split, but make
-		 * room for the attribute value itself.
-		 */
-		nblks += dblocks;
-		nblks += XFS_NEXTENTADD_SPACE_RES(mp, dblocks, XFS_ATTR_FORK);
-	}
+	args.op_flags = XFS_DA_OP_ADDNAME | XFS_DA_OP_OKNOENT;
 
 	/* Size is now blocks for attribute data */
-	args.total = nblks;
+	args.total = xfs_attr_calc_size(dp, name->len, valuelen, &local);
 
 	/*
 	 * Start our first transaction of the day.
@@ -289,18 +303,17 @@ xfs_attr_set_int(xfs_inode_t *dp, struct xfs_name *name,
 	if (rsvd)
 		args.trans->t_flags |= XFS_TRANS_RESERVE;
 
-	if ((error = xfs_trans_reserve(args.trans, (uint) nblks,
-				      XFS_ATTRSET_LOG_RES(mp, nblks),
-				      0, XFS_TRANS_PERM_LOG_RES,
-				      XFS_ATTRSET_LOG_COUNT))) {
+	if ((error = xfs_trans_reserve(args.trans, args.total,
+			XFS_ATTRSET_LOG_RES(mp, args.total), 0,
+			XFS_TRANS_PERM_LOG_RES, XFS_ATTRSET_LOG_COUNT))) {
 		xfs_trans_cancel(args.trans, 0);
 		return(error);
 	}
 	xfs_ilock(dp, XFS_ILOCK_EXCL);
 
-	error = XFS_TRANS_RESERVE_QUOTA_NBLKS(mp, args.trans, dp, nblks, 0,
-			 rsvd ? XFS_QMOPT_RES_REGBLKS | XFS_QMOPT_FORCE_RES :
-				XFS_QMOPT_RES_REGBLKS);
+	error = XFS_TRANS_RESERVE_QUOTA_NBLKS(mp, args.trans, dp, args.total, 0,
+				rsvd ? XFS_QMOPT_RES_REGBLKS | XFS_QMOPT_FORCE_RES :
+				       XFS_QMOPT_RES_REGBLKS);
 	if (error) {
 		xfs_iunlock(dp, XFS_ILOCK_EXCL);
 		xfs_trans_cancel(args.trans, XFS_TRANS_RELEASE_LOG_RES);
@@ -387,7 +400,9 @@ xfs_attr_set_int(xfs_inode_t *dp, struct xfs_name *name,
 		 * Commit the leaf transformation.  We'll need another (linked)
 		 * transaction to add the new attribute to the leaf.
 		 */
-		if ((error = xfs_attr_rolltrans(&args.trans, dp)))
+
+		error = xfs_trans_roll(&args.trans, dp);
+		if (error)
 			goto out;
 
 	}
@@ -529,9 +544,7 @@ xfs_attr_remove_int(xfs_inode_t *dp, struct xfs_name *name, int flags)
 	/*
 	 * Decide on what work routines to call based on the inode size.
 	 */
-	if (XFS_IFORK_Q(dp) == 0 ||
-	    (dp->i_d.di_aformat == XFS_DINODE_FMT_EXTENTS &&
-	     dp->i_d.di_anextents == 0)) {
+	if (!xfs_inode_hasattr(dp)) {
 		error = XFS_ERROR(ENOATTR);
 		goto out;
 	}
@@ -601,29 +614,33 @@ xfs_attr_remove(
 		return error;
 
 	xfs_ilock(dp, XFS_ILOCK_SHARED);
-	if (XFS_IFORK_Q(dp) == 0 ||
-		   (dp->i_d.di_aformat == XFS_DINODE_FMT_EXTENTS &&
-		    dp->i_d.di_anextents == 0)) {
+	if (!xfs_inode_hasattr(dp)) {
 		xfs_iunlock(dp, XFS_ILOCK_SHARED);
-		return(XFS_ERROR(ENOATTR));
+		return XFS_ERROR(ENOATTR);
 	}
 	xfs_iunlock(dp, XFS_ILOCK_SHARED);
 
 	return xfs_attr_remove_int(dp, &xname, flags);
 }
 
-STATIC int
+int
 xfs_attr_list_int(xfs_attr_list_context_t *context)
 {
 	int error;
 	xfs_inode_t *dp = context->dp;
 
+	XFS_STATS_INC(xs_attr_list);
+
+	if (XFS_FORCED_SHUTDOWN(dp->i_mount))
+		return EIO;
+
+	xfs_ilock(dp, XFS_ILOCK_SHARED);
+	xfs_attr_trace_l_c("syscall start", context);
+
 	/*
 	 * Decide on what work routines to call based on the inode size.
 	 */
-	if (XFS_IFORK_Q(dp) == 0 ||
-	    (dp->i_d.di_aformat == XFS_DINODE_FMT_EXTENTS &&
-	     dp->i_d.di_anextents == 0)) {
+	if (!xfs_inode_hasattr(dp)) {
 		error = 0;
 	} else if (dp->i_d.di_aformat == XFS_DINODE_FMT_LOCAL) {
 		error = xfs_attr_shortform_list(context);
@@ -632,6 +649,10 @@ xfs_attr_list_int(xfs_attr_list_context_t *context)
 	} else {
 		error = xfs_attr_node_list(context);
 	}
+
+	xfs_iunlock(dp, XFS_ILOCK_SHARED);
+	xfs_attr_trace_l_c("syscall end", context);
+
 	return error;
 }
 
@@ -648,74 +669,50 @@ xfs_attr_list_int(xfs_attr_list_context_t *context)
  */
 /*ARGSUSED*/
 STATIC int
-xfs_attr_put_listent(xfs_attr_list_context_t *context, attrnames_t *namesp,
+xfs_attr_put_listent(xfs_attr_list_context_t *context, int flags,
 		     char *name, int namelen,
 		     int valuelen, char *value)
 {
+	struct attrlist *alist = (struct attrlist *)context->alist;
 	attrlist_ent_t *aep;
 	int arraytop;
 
 	ASSERT(!(context->flags & ATTR_KERNOVAL));
 	ASSERT(context->count >= 0);
 	ASSERT(context->count < (ATTR_MAX_VALUELEN/8));
-	ASSERT(context->firstu >= sizeof(*context->alist));
+	ASSERT(context->firstu >= sizeof(*alist));
 	ASSERT(context->firstu <= context->bufsize);
 
-	arraytop = sizeof(*context->alist) +
-			context->count * sizeof(context->alist->al_offset[0]);
+	/*
+	 * Only list entries in the right namespace.
+	 */
+	if (((context->flags & ATTR_SECURE) == 0) !=
+	    ((flags & XFS_ATTR_SECURE) == 0))
+		return 0;
+	if (((context->flags & ATTR_ROOT) == 0) !=
+	    ((flags & XFS_ATTR_ROOT) == 0))
+		return 0;
+
+	arraytop = sizeof(*alist) +
+			context->count * sizeof(alist->al_offset[0]);
 	context->firstu -= ATTR_ENTSIZE(namelen);
 	if (context->firstu < arraytop) {
 		xfs_attr_trace_l_c("buffer full", context);
-		context->alist->al_more = 1;
+		alist->al_more = 1;
 		context->seen_enough = 1;
 		return 1;
 	}
 
-	aep = (attrlist_ent_t *)&(((char *)context->alist)[ context->firstu ]);
+	aep = (attrlist_ent_t *)&context->alist[context->firstu];
 	aep->a_valuelen = valuelen;
 	memcpy(aep->a_name, name, namelen);
-	aep->a_name[ namelen ] = 0;
-	context->alist->al_offset[ context->count++ ] = context->firstu;
-	context->alist->al_count = context->count;
+	aep->a_name[namelen] = 0;
+	alist->al_offset[context->count++] = context->firstu;
+	alist->al_count = context->count;
 	xfs_attr_trace_l_c("add", context);
 	return 0;
 }
 
-STATIC int
-xfs_attr_kern_list(xfs_attr_list_context_t *context, attrnames_t *namesp,
-		     char *name, int namelen,
-		     int valuelen, char *value)
-{
-	char *offset;
-	int arraytop;
-
-	ASSERT(context->count >= 0);
-
-	arraytop = context->count + namesp->attr_namelen + namelen + 1;
-	if (arraytop > context->firstu) {
-		context->count = -1;	/* insufficient space */
-		return 1;
-	}
-	offset = (char *)context->alist + context->count;
-	strncpy(offset, namesp->attr_name, namesp->attr_namelen);
-	offset += namesp->attr_namelen;
-	strncpy(offset, name, namelen);			/* real name */
-	offset += namelen;
-	*offset = '\0';
-	context->count += namesp->attr_namelen + namelen + 1;
-	return 0;
-}
-
-/*ARGSUSED*/
-STATIC int
-xfs_attr_kern_list_sizes(xfs_attr_list_context_t *context, attrnames_t *namesp,
-		     char *name, int namelen,
-		     int valuelen, char *value)
-{
-	context->count += namesp->attr_namelen + namelen + 1;
-	return 0;
-}
-
 /*
  * Generate a list of extended attribute names and optionally
  * also value lengths.  Positive return value follows the XFS
@@ -732,10 +729,9 @@ xfs_attr_list(
 	attrlist_cursor_kern_t *cursor)
 {
 	xfs_attr_list_context_t context;
+	struct attrlist *alist;
 	int error;
 
-	XFS_STATS_INC(xs_attr_list);
-
 	/*
 	 * Validate the cursor.
 	 */
@@ -756,52 +752,23 @@ xfs_attr_list(
 	/*
 	 * Initialize the output buffer.
 	 */
+	memset(&context, 0, sizeof(context));
 	context.dp = dp;
 	context.cursor = cursor;
-	context.count = 0;
-	context.dupcnt = 0;
 	context.resynch = 1;
 	context.flags = flags;
-	context.seen_enough = 0;
-	context.alist = (attrlist_t *)buffer;
-	context.put_value = 0;
-
-	if (flags & ATTR_KERNAMELS) {
-		context.bufsize = bufsize;
-		context.firstu = context.bufsize;
-		if (flags & ATTR_KERNOVAL)
-			context.put_listent = xfs_attr_kern_list_sizes;
-		else
-			context.put_listent = xfs_attr_kern_list;
-	} else {
-		context.bufsize = (bufsize & ~(sizeof(int)-1));  /* align */
-		context.firstu = context.bufsize;
-		context.alist->al_count = 0;
-		context.alist->al_more = 0;
-		context.alist->al_offset[0] = context.bufsize;
-		context.put_listent = xfs_attr_put_listent;
-	}
-
-	if (XFS_FORCED_SHUTDOWN(dp->i_mount))
-		return EIO;
+	context.alist = buffer;
+	context.bufsize = (bufsize & ~(sizeof(int)-1));  /* align */
+	context.firstu = context.bufsize;
+	context.put_listent = xfs_attr_put_listent;
 
-	xfs_ilock(dp, XFS_ILOCK_SHARED);
-	xfs_attr_trace_l_c("syscall start", &context);
+	alist = (struct attrlist *)context.alist;
+	alist->al_count = 0;
+	alist->al_more = 0;
+	alist->al_offset[0] = context.bufsize;
 
 	error = xfs_attr_list_int(&context);
-
-	xfs_iunlock(dp, XFS_ILOCK_SHARED);
-	xfs_attr_trace_l_c("syscall end", &context);
-
-	if (context.flags & (ATTR_KERNOVAL|ATTR_KERNAMELS)) {
-		/* must return negated buffer size or the error */
-		if (context.count < 0)
-			error = XFS_ERROR(ERANGE);
-		else
-			error = -context.count;
-	} else
-		ASSERT(error >= 0);
-
+	ASSERT(error >= 0);
 	return error;
 }
 
@@ -816,12 +783,10 @@ xfs_attr_inactive(xfs_inode_t *dp)
 	ASSERT(! XFS_NOT_DQATTACHED(mp, dp));
 
 	xfs_ilock(dp, XFS_ILOCK_SHARED);
-	if ((XFS_IFORK_Q(dp) == 0) ||
-	    (dp->i_d.di_aformat == XFS_DINODE_FMT_LOCAL) ||
-	    (dp->i_d.di_aformat == XFS_DINODE_FMT_EXTENTS &&
-	     dp->i_d.di_anextents == 0)) {
+	if (!xfs_inode_hasattr(dp) ||
+	    dp->i_d.di_aformat == XFS_DINODE_FMT_LOCAL) {
 		xfs_iunlock(dp, XFS_ILOCK_SHARED);
-		return(0);
+		return 0;
 	}
 	xfs_iunlock(dp, XFS_ILOCK_SHARED);
 
@@ -854,10 +819,8 @@ xfs_attr_inactive(xfs_inode_t *dp)
 	/*
 	 * Decide on what work routines to call based on the inode size.
 	 */
-	if ((XFS_IFORK_Q(dp) == 0) ||
-	    (dp->i_d.di_aformat == XFS_DINODE_FMT_LOCAL) ||
-	    (dp->i_d.di_aformat == XFS_DINODE_FMT_EXTENTS &&
-	     dp->i_d.di_anextents == 0)) {
+	if (!xfs_inode_hasattr(dp) ||
+	    dp->i_d.di_aformat == XFS_DINODE_FMT_LOCAL) {
 		error = 0;
 		goto out;
 	}
@@ -974,7 +937,7 @@ xfs_attr_leaf_addname(xfs_da_args_t *args)
 			xfs_da_brelse(args->trans, bp);
 			return(retval);
 		}
-		args->rename = 1;			/* an atomic rename */
+		args->op_flags |= XFS_DA_OP_RENAME;	/* an atomic rename */
 		args->blkno2 = args->blkno;		/* set 2nd entry info*/
 		args->index2 = args->index;
 		args->rmtblkno2 = args->rmtblkno;
@@ -1019,7 +982,8 @@ xfs_attr_leaf_addname(xfs_da_args_t *args)
 		 * Commit the current trans (including the inode) and start
 		 * a new one.
 		 */
-		if ((error = xfs_attr_rolltrans(&args->trans, dp)))
+		error = xfs_trans_roll(&args->trans, dp);
+		if (error)
 			return (error);
 
 		/*
@@ -1033,7 +997,8 @@ xfs_attr_leaf_addname(xfs_da_args_t *args)
 	 * Commit the transaction that added the attr name so that
 	 * later routines can manage their own transactions.
 	 */
-	if ((error = xfs_attr_rolltrans(&args->trans, dp)))
+	error = xfs_trans_roll(&args->trans, dp);
+	if (error)
 		return (error);
 
 	/*
@@ -1054,7 +1019,7 @@ xfs_attr_leaf_addname(xfs_da_args_t *args)
 	 * so that one disappears and one appears atomically.  Then we
 	 * must remove the "old" attribute/value pair.
 	 */
-	if (args->rename) {
+	if (args->op_flags & XFS_DA_OP_RENAME) {
 		/*
 		 * In a separate transaction, set the incomplete flag on the
 		 * "old" attr and clear the incomplete flag on the "new" attr.
@@ -1122,7 +1087,7 @@ xfs_attr_leaf_addname(xfs_da_args_t *args)
 		/*
 		 * Commit the remove and start the next trans in series.
 		 */
-		error = xfs_attr_rolltrans(&args->trans, dp);
+		error = xfs_trans_roll(&args->trans, dp);
 
 	} else if (args->rmtblkno > 0) {
 		/*
@@ -1307,7 +1272,7 @@ restart:
 	} else if (retval == EEXIST) {
 		if (args->flags & ATTR_CREATE)
 			goto out;
-		args->rename = 1;			/* atomic rename op */
+		args->op_flags |= XFS_DA_OP_RENAME;	/* atomic rename op */
 		args->blkno2 = args->blkno;		/* set 2nd entry info*/
 		args->index2 = args->index;
 		args->rmtblkno2 = args->rmtblkno;
@@ -1353,7 +1318,8 @@ restart:
 			 * Commit the node conversion and start the next
 			 * trans in the chain.
 			 */
-			if ((error = xfs_attr_rolltrans(&args->trans, dp)))
+			error = xfs_trans_roll(&args->trans, dp);
+			if (error)
 				goto out;
 
 			goto restart;
@@ -1404,7 +1370,8 @@ restart:
 	 * Commit the leaf addition or btree split and start the next
 	 * trans in the chain.
 	 */
-	if ((error = xfs_attr_rolltrans(&args->trans, dp)))
+	error = xfs_trans_roll(&args->trans, dp);
+	if (error)
 		goto out;
 
 	/*
@@ -1425,7 +1392,7 @@ restart:
 	 * so that one disappears and one appears atomically.  Then we
 	 * must remove the "old" attribute/value pair.
 	 */
-	if (args->rename) {
+	if (args->op_flags & XFS_DA_OP_RENAME) {
 		/*
 		 * In a separate transaction, set the incomplete flag on the
 		 * "old" attr and clear the incomplete flag on the "new" attr.
@@ -1504,7 +1471,8 @@ restart:
 		/*
 		 * Commit and start the next trans in the chain.
 		 */
-		if ((error = xfs_attr_rolltrans(&args->trans, dp)))
+		error = xfs_trans_roll(&args->trans, dp);
+		if (error)
 			goto out;
 
 	} else if (args->rmtblkno > 0) {
@@ -1636,7 +1604,8 @@ xfs_attr_node_removename(xfs_da_args_t *args)
 		/*
 		 * Commit the Btree join operation and start a new trans.
 		 */
-		if ((error = xfs_attr_rolltrans(&args->trans, dp)))
+		error = xfs_trans_roll(&args->trans, dp);
+		if (error)
 			goto out;
 	}
 
@@ -2137,7 +2106,8 @@ xfs_attr_rmtval_set(xfs_da_args_t *args)
 		/*
 		 * Start the next trans in the chain.
 		 */
-		if ((error = xfs_attr_rolltrans(&args->trans, dp)))
+		error = xfs_trans_roll(&args->trans, dp);
+		if (error)
 			return (error);
 	}
 
@@ -2287,7 +2257,8 @@ xfs_attr_rmtval_remove(xfs_da_args_t *args)
 		/*
 		 * Close out trans and start the next one in the chain.
 		 */
-		if ((error = xfs_attr_rolltrans(&args->trans, args->dp)))
+		error = xfs_trans_roll(&args->trans, args->dp);
+		if (error)
 			return (error);
 	}
 	return(0);
@@ -2300,23 +2271,7 @@ xfs_attr_rmtval_remove(xfs_da_args_t *args)
 void
 xfs_attr_trace_l_c(char *where, struct xfs_attr_list_context *context)
 {
-	xfs_attr_trace_enter(XFS_ATTR_KTRACE_L_C, where,
-		(__psunsigned_t)context->dp,
-		(__psunsigned_t)context->cursor->hashval,
-		(__psunsigned_t)context->cursor->blkno,
-		(__psunsigned_t)context->cursor->offset,
-		(__psunsigned_t)context->alist,
-		(__psunsigned_t)context->bufsize,
-		(__psunsigned_t)context->count,
-		(__psunsigned_t)context->firstu,
-		(__psunsigned_t)
-			((context->count > 0) &&
-			!(context->flags & (ATTR_KERNAMELS|ATTR_KERNOVAL)))
-				? (ATTR_ENTRY(context->alist,
-					      context->count-1)->a_valuelen)
-				: 0,
-		(__psunsigned_t)context->dupcnt,
-		(__psunsigned_t)context->flags,
+	xfs_attr_trace_enter(XFS_ATTR_KTRACE_L_C, where, context,
 		(__psunsigned_t)NULL,
 		(__psunsigned_t)NULL,
 		(__psunsigned_t)NULL);
@@ -2329,23 +2284,7 @@ void
 xfs_attr_trace_l_cn(char *where, struct xfs_attr_list_context *context,
 			 struct xfs_da_intnode *node)
 {
-	xfs_attr_trace_enter(XFS_ATTR_KTRACE_L_CN, where,
-		(__psunsigned_t)context->dp,
-		(__psunsigned_t)context->cursor->hashval,
-		(__psunsigned_t)context->cursor->blkno,
-		(__psunsigned_t)context->cursor->offset,
-		(__psunsigned_t)context->alist,
-		(__psunsigned_t)context->bufsize,
-		(__psunsigned_t)context->count,
-		(__psunsigned_t)context->firstu,
-		(__psunsigned_t)
-			((context->count > 0) &&
-			!(context->flags & (ATTR_KERNAMELS|ATTR_KERNOVAL)))
-				? (ATTR_ENTRY(context->alist,
-					      context->count-1)->a_valuelen)
-				: 0,
-		(__psunsigned_t)context->dupcnt,
-		(__psunsigned_t)context->flags,
+	xfs_attr_trace_enter(XFS_ATTR_KTRACE_L_CN, where, context,
 		(__psunsigned_t)be16_to_cpu(node->hdr.count),
 		(__psunsigned_t)be32_to_cpu(node->btree[0].hashval),
 		(__psunsigned_t)be32_to_cpu(node->btree[
@@ -2359,23 +2298,7 @@ void
 xfs_attr_trace_l_cb(char *where, struct xfs_attr_list_context *context,
 			  struct xfs_da_node_entry *btree)
 {
-	xfs_attr_trace_enter(XFS_ATTR_KTRACE_L_CB, where,
-		(__psunsigned_t)context->dp,
-		(__psunsigned_t)context->cursor->hashval,
-		(__psunsigned_t)context->cursor->blkno,
-		(__psunsigned_t)context->cursor->offset,
-		(__psunsigned_t)context->alist,
-		(__psunsigned_t)context->bufsize,
-		(__psunsigned_t)context->count,
-		(__psunsigned_t)context->firstu,
-		(__psunsigned_t)
-			((context->count > 0) &&
-			!(context->flags & (ATTR_KERNAMELS|ATTR_KERNOVAL)))
-				? (ATTR_ENTRY(context->alist,
-					      context->count-1)->a_valuelen)
-				: 0,
-		(__psunsigned_t)context->dupcnt,
-		(__psunsigned_t)context->flags,
+	xfs_attr_trace_enter(XFS_ATTR_KTRACE_L_CB, where, context,
 		(__psunsigned_t)be32_to_cpu(btree->hashval),
 		(__psunsigned_t)be32_to_cpu(btree->before),
 		(__psunsigned_t)NULL);
@@ -2388,23 +2311,7 @@ void
 xfs_attr_trace_l_cl(char *where, struct xfs_attr_list_context *context,
 			      struct xfs_attr_leafblock *leaf)
 {
-	xfs_attr_trace_enter(XFS_ATTR_KTRACE_L_CL, where,
-		(__psunsigned_t)context->dp,
-		(__psunsigned_t)context->cursor->hashval,
-		(__psunsigned_t)context->cursor->blkno,
-		(__psunsigned_t)context->cursor->offset,
-		(__psunsigned_t)context->alist,
-		(__psunsigned_t)context->bufsize,
-		(__psunsigned_t)context->count,
-		(__psunsigned_t)context->firstu,
-		(__psunsigned_t)
-			((context->count > 0) &&
-			!(context->flags & (ATTR_KERNAMELS|ATTR_KERNOVAL)))
-				? (ATTR_ENTRY(context->alist,
-					      context->count-1)->a_valuelen)
-				: 0,
-		(__psunsigned_t)context->dupcnt,
-		(__psunsigned_t)context->flags,
+	xfs_attr_trace_enter(XFS_ATTR_KTRACE_L_CL, where, context,
 		(__psunsigned_t)be16_to_cpu(leaf->hdr.count),
 		(__psunsigned_t)be32_to_cpu(leaf->entries[0].hashval),
 		(__psunsigned_t)be32_to_cpu(leaf->entries[
@@ -2417,329 +2324,24 @@ xfs_attr_trace_l_cl(char *where, struct xfs_attr_list_context *context,
  */
 void
 xfs_attr_trace_enter(int type, char *where,
-			 __psunsigned_t a2, __psunsigned_t a3,
-			 __psunsigned_t a4, __psunsigned_t a5,
-			 __psunsigned_t a6, __psunsigned_t a7,
-			 __psunsigned_t a8, __psunsigned_t a9,
-			 __psunsigned_t a10, __psunsigned_t a11,
-			 __psunsigned_t a12, __psunsigned_t a13,
-			 __psunsigned_t a14, __psunsigned_t a15)
+			 struct xfs_attr_list_context *context,
+			 __psunsigned_t a13, __psunsigned_t a14,
+			 __psunsigned_t a15)
 {
 	ASSERT(xfs_attr_trace_buf);
 	ktrace_enter(xfs_attr_trace_buf, (void *)((__psunsigned_t)type),
-					 (void *)where,
-					 (void *)a2,  (void *)a3,  (void *)a4,
-					 (void *)a5,  (void *)a6,  (void *)a7,
-					 (void *)a8,  (void *)a9,  (void *)a10,
-					 (void *)a11, (void *)a12, (void *)a13,
-					 (void *)a14, (void *)a15);
+		(void *)((__psunsigned_t)where),
+		(void *)((__psunsigned_t)context->dp),
+		(void *)((__psunsigned_t)context->cursor->hashval),
+		(void *)((__psunsigned_t)context->cursor->blkno),
+		(void *)((__psunsigned_t)context->cursor->offset),
+		(void *)((__psunsigned_t)context->alist),
+		(void *)((__psunsigned_t)context->bufsize),
+		(void *)((__psunsigned_t)context->count),
+		(void *)((__psunsigned_t)context->firstu),
+		NULL,
+		(void *)((__psunsigned_t)context->dupcnt),
+		(void *)((__psunsigned_t)context->flags),
+		(void *)a13, (void *)a14, (void *)a15);
 }
 #endif	/* XFS_ATTR_TRACE */
-
-
-/*========================================================================
- * System (pseudo) namespace attribute interface routines.
- *========================================================================*/
-
-STATIC int
-posix_acl_access_set(
-	bhv_vnode_t *vp, char *name, void *data, size_t size, int xflags)
-{
-	return xfs_acl_vset(vp, data, size, _ACL_TYPE_ACCESS);
-}
-
-STATIC int
-posix_acl_access_remove(
-	bhv_vnode_t *vp, char *name, int xflags)
-{
-	return xfs_acl_vremove(vp, _ACL_TYPE_ACCESS);
-}
-
-STATIC int
-posix_acl_access_get(
-	bhv_vnode_t *vp, char *name, void *data, size_t size, int xflags)
-{
-	return xfs_acl_vget(vp, data, size, _ACL_TYPE_ACCESS);
-}
-
-STATIC int
-posix_acl_access_exists(
-	bhv_vnode_t *vp)
-{
-	return xfs_acl_vhasacl_access(vp);
-}
-
-STATIC int
-posix_acl_default_set(
-	bhv_vnode_t *vp, char *name, void *data, size_t size, int xflags)
-{
-	return xfs_acl_vset(vp, data, size, _ACL_TYPE_DEFAULT);
-}
-
-STATIC int
-posix_acl_default_get(
-	bhv_vnode_t *vp, char *name, void *data, size_t size, int xflags)
-{
-	return xfs_acl_vget(vp, data, size, _ACL_TYPE_DEFAULT);
-}
-
-STATIC int
-posix_acl_default_remove(
-	bhv_vnode_t *vp, char *name, int xflags)
-{
-	return xfs_acl_vremove(vp, _ACL_TYPE_DEFAULT);
-}
-
-STATIC int
-posix_acl_default_exists(
-	bhv_vnode_t *vp)
-{
-	return xfs_acl_vhasacl_default(vp);
-}
-
-static struct attrnames posix_acl_access = {
-	.attr_name	= "posix_acl_access",
-	.attr_namelen	= sizeof("posix_acl_access") - 1,
-	.attr_get	= posix_acl_access_get,
-	.attr_set	= posix_acl_access_set,
-	.attr_remove	= posix_acl_access_remove,
-	.attr_exists	= posix_acl_access_exists,
-};
-
-static struct attrnames posix_acl_default = {
-	.attr_name	= "posix_acl_default",
-	.attr_namelen	= sizeof("posix_acl_default") - 1,
-	.attr_get	= posix_acl_default_get,
-	.attr_set	= posix_acl_default_set,
-	.attr_remove	= posix_acl_default_remove,
-	.attr_exists	= posix_acl_default_exists,
-};
-
-static struct attrnames *attr_system_names[] =
-	{ &posix_acl_access, &posix_acl_default };
-
-
-/*========================================================================
- * Namespace-prefix-style attribute name interface routines.
- *========================================================================*/
-
-STATIC int
-attr_generic_set(
-	bhv_vnode_t *vp, char *name, void *data, size_t size, int xflags)
-{
-	return -xfs_attr_set(xfs_vtoi(vp), name, data, size, xflags);
-}
-
-STATIC int
-attr_generic_get(
-	bhv_vnode_t *vp, char *name, void *data, size_t size, int xflags)
-{
-	int	error, asize = size;
-
-	error = xfs_attr_get(xfs_vtoi(vp), name, data, &asize, xflags);
-	if (!error)
-		return asize;
-	return -error;
-}
-
-STATIC int
-attr_generic_remove(
-	bhv_vnode_t *vp, char *name, int xflags)
-{
-	return -xfs_attr_remove(xfs_vtoi(vp), name, xflags);
-}
-
-STATIC int
-attr_generic_listadd(
-	attrnames_t		*prefix,
-	attrnames_t		*namesp,
-	void			*data,
-	size_t			size,
-	ssize_t			*result)
-{
-	char			*p = data + *result;
-
-	*result += prefix->attr_namelen;
-	*result += namesp->attr_namelen + 1;
-	if (!size)
-		return 0;
-	if (*result > size)
-		return -ERANGE;
-	strcpy(p, prefix->attr_name);
-	p += prefix->attr_namelen;
-	strcpy(p, namesp->attr_name);
-	p += namesp->attr_namelen + 1;
-	return 0;
-}
-
-STATIC int
-attr_system_list(
-	bhv_vnode_t		*vp,
-	void			*data,
-	size_t			size,
-	ssize_t			*result)
-{
-	attrnames_t		*namesp;
-	int			i, error = 0;
-
-	for (i = 0; i < ATTR_SYSCOUNT; i++) {
-		namesp = attr_system_names[i];
-		if (!namesp->attr_exists || !namesp->attr_exists(vp))
-			continue;
-		error = attr_generic_listadd(&attr_system, namesp,
-						data, size, result);
-		if (error)
-			break;
-	}
-	return error;
-}
-
-int
-attr_generic_list(
-	bhv_vnode_t *vp, void *data, size_t size, int xflags, ssize_t *result)
-{
-	attrlist_cursor_kern_t	cursor = { 0 };
-	int			error;
-
-	error = xfs_attr_list(xfs_vtoi(vp), data, size, xflags, &cursor);
-	if (error > 0)
-		return -error;
-	*result = -error;
-	return attr_system_list(vp, data, size, result);
-}
-
-attrnames_t *
-attr_lookup_namespace(
-	char			*name,
-	struct attrnames	**names,
-	int			nnames)
-{
-	int			i;
-
-	for (i = 0; i < nnames; i++)
-		if (!strncmp(name, names[i]->attr_name, names[i]->attr_namelen))
-			return names[i];
-	return NULL;
-}
-
-/*
- * Some checks to prevent people abusing EAs to get over quota:
- * - Don't allow modifying user EAs on devices/symlinks;
- * - Don't allow modifying user EAs if sticky bit set;
- */
-STATIC int
-attr_user_capable(
-	bhv_vnode_t	*vp,
-	cred_t		*cred)
-{
-	struct inode	*inode = vn_to_inode(vp);
-
-	if (IS_IMMUTABLE(inode) || IS_APPEND(inode))
-		return -EPERM;
-	if (!S_ISREG(inode->i_mode) && !S_ISDIR(inode->i_mode) &&
-	    !capable(CAP_SYS_ADMIN))
-		return -EPERM;
-	if (S_ISDIR(inode->i_mode) && (inode->i_mode & S_ISVTX) &&
-	    (current_fsuid(cred) != inode->i_uid) && !capable(CAP_FOWNER))
-		return -EPERM;
-	return 0;
-}
-
-STATIC int
-attr_trusted_capable(
-	bhv_vnode_t	*vp,
-	cred_t		*cred)
-{
-	struct inode	*inode = vn_to_inode(vp);
-
-	if (IS_IMMUTABLE(inode) || IS_APPEND(inode))
-		return -EPERM;
-	if (!capable(CAP_SYS_ADMIN))
-		return -EPERM;
-	return 0;
-}
-
-STATIC int
-attr_system_set(
-	bhv_vnode_t *vp, char *name, void *data, size_t size, int xflags)
-{
-	attrnames_t	*namesp;
-	int		error;
-
-	if (xflags & ATTR_CREATE)
-		return -EINVAL;
-
-	namesp = attr_lookup_namespace(name, attr_system_names, ATTR_SYSCOUNT);
-	if (!namesp)
-		return -EOPNOTSUPP;
-	error = namesp->attr_set(vp, name, data, size, xflags);
-	if (!error)
-		error = vn_revalidate(vp);
-	return error;
-}
-
-STATIC int
-attr_system_get(
-	bhv_vnode_t *vp, char *name, void *data, size_t size, int xflags)
-{
-	attrnames_t	*namesp;
-
-	namesp = attr_lookup_namespace(name, attr_system_names, ATTR_SYSCOUNT);
-	if (!namesp)
-		return -EOPNOTSUPP;
-	return namesp->attr_get(vp, name, data, size, xflags);
-}
-
-STATIC int
-attr_system_remove(
-	bhv_vnode_t *vp, char *name, int xflags)
-{
-	attrnames_t	*namesp;
-
-	namesp = attr_lookup_namespace(name, attr_system_names, ATTR_SYSCOUNT);
-	if (!namesp)
-		return -EOPNOTSUPP;
-	return namesp->attr_remove(vp, name, xflags);
-}
-
-struct attrnames attr_system = {
-	.attr_name	= "system.",
-	.attr_namelen	= sizeof("system.") - 1,
-	.attr_flag	= ATTR_SYSTEM,
-	.attr_get	= attr_system_get,
-	.attr_set	= attr_system_set,
-	.attr_remove	= attr_system_remove,
-	.attr_capable	= (attrcapable_t)fs_noerr,
-};
-
-struct attrnames attr_trusted = {
-	.attr_name	= "trusted.",
-	.attr_namelen	= sizeof("trusted.") - 1,
-	.attr_flag	= ATTR_ROOT,
-	.attr_get	= attr_generic_get,
-	.attr_set	= attr_generic_set,
-	.attr_remove	= attr_generic_remove,
-	.attr_capable	= attr_trusted_capable,
-};
-
-struct attrnames attr_secure = {
-	.attr_name	= "security.",
-	.attr_namelen	= sizeof("security.") - 1,
-	.attr_flag	= ATTR_SECURE,
-	.attr_get	= attr_generic_get,
-	.attr_set	= attr_generic_set,
-	.attr_remove	= attr_generic_remove,
-	.attr_capable	= (attrcapable_t)fs_noerr,
-};
-
-struct attrnames attr_user = {
-	.attr_name	= "user.",
-	.attr_namelen	= sizeof("user.") - 1,
-	.attr_get	= attr_generic_get,
-	.attr_set	= attr_generic_set,
-	.attr_remove	= attr_generic_remove,
-	.attr_capable	= attr_user_capable,
-};
-
-struct attrnames *attr_namespaces[] =
-	{ &attr_system, &attr_trusted, &attr_secure, &attr_user };
diff --git a/fs/xfs/xfs_attr.h b/fs/xfs/xfs_attr.h
index 6cfc9384fe35..fb3b2a68b9b9 100644
--- a/fs/xfs/xfs_attr.h
+++ b/fs/xfs/xfs_attr.h
@@ -18,9 +18,11 @@
 #ifndef __XFS_ATTR_H__
 #define	__XFS_ATTR_H__
 
+struct xfs_inode;
+struct xfs_da_args;
+struct xfs_attr_list_context;
+
 /*
- * xfs_attr.h
- *
  * Large attribute lists are structured around Btrees where all the data
  * elements are in the leaf nodes.  Attribute names are hashed into an int,
  * then that int is used as the index into the Btree.  Since the hashval
@@ -35,35 +37,6 @@
  * External interfaces
  *========================================================================*/
 
-struct cred;
-struct xfs_attr_list_context;
-
-typedef int (*attrset_t)(bhv_vnode_t *, char *, void *, size_t, int);
-typedef int (*attrget_t)(bhv_vnode_t *, char *, void *, size_t, int);
-typedef int (*attrremove_t)(bhv_vnode_t *, char *, int);
-typedef int (*attrexists_t)(bhv_vnode_t *);
-typedef int (*attrcapable_t)(bhv_vnode_t *, struct cred *);
-
-typedef struct attrnames {
-	char *		attr_name;
-	unsigned int	attr_namelen;
-	unsigned int	attr_flag;
-	attrget_t	attr_get;
-	attrset_t	attr_set;
-	attrremove_t	attr_remove;
-	attrexists_t	attr_exists;
-	attrcapable_t	attr_capable;
-} attrnames_t;
-
-#define ATTR_NAMECOUNT	4
-extern struct attrnames attr_user;
-extern struct attrnames attr_secure;
-extern struct attrnames attr_system;
-extern struct attrnames attr_trusted;
-extern struct attrnames *attr_namespaces[ATTR_NAMECOUNT];
-
-extern attrnames_t *attr_lookup_namespace(char *, attrnames_t **, int);
-extern int attr_generic_list(bhv_vnode_t *, void *, size_t, int, ssize_t *);
 
 #define ATTR_DONTFOLLOW	0x0001	/* -- unused, from IRIX -- */
 #define ATTR_ROOT	0x0002	/* use attrs in root (trusted) namespace */
@@ -71,16 +44,9 @@ extern int attr_generic_list(bhv_vnode_t *, void *, size_t, int, ssize_t *);
 #define ATTR_SECURE	0x0008	/* use attrs in security namespace */
 #define ATTR_CREATE	0x0010	/* pure create: fail if attr already exists */
 #define ATTR_REPLACE	0x0020	/* pure set: fail if attr does not exist */
-#define ATTR_SYSTEM	0x0100	/* use attrs in system (pseudo) namespace */
 
-#define ATTR_KERNACCESS	0x0400	/* [kernel] iaccess, inode held io-locked */
 #define ATTR_KERNOTIME	0x1000	/* [kernel] don't update inode timestamps */
 #define ATTR_KERNOVAL	0x2000	/* [kernel] get attr size only, not value */
-#define ATTR_KERNAMELS	0x4000	/* [kernel] list attr names (simple list) */
-
-#define ATTR_KERNORMALS	0x0800	/* [kernel] normal attr list: user+secure */
-#define ATTR_KERNROOTLS	0x8000	/* [kernel] include root in the attr list */
-#define ATTR_KERNFULLS	(ATTR_KERNORMALS|ATTR_KERNROOTLS)
 
 /*
  * The maximum size (into the kernel or returned from the kernel) of an
@@ -119,22 +85,6 @@ typedef struct attrlist_ent {	/* data from attr_list() */
 	 &((char *)buffer)[ ((attrlist_t *)(buffer))->al_offset[index] ])
 
 /*
- * Multi-attribute operation vector.
- */
-typedef struct attr_multiop {
-	int	am_opcode;	/* operation to perform (ATTR_OP_GET, etc.) */
-	int	am_error;	/* [out arg] result of this sub-op (an errno) */
-	char	*am_attrname;	/* attribute name to work with */
-	char	*am_attrvalue;	/* [in/out arg] attribute value (raw bytes) */
-	int	am_length;	/* [in/out arg] length of value */
-	int	am_flags;	/* bitwise OR of attr API flags defined above */
-} attr_multiop_t;
-
-#define ATTR_OP_GET	1	/* return the indicated attr's value */
-#define ATTR_OP_SET	2	/* set/create the indicated attr/value pair */
-#define ATTR_OP_REMOVE	3	/* remove the indicated attr */
-
-/*
  * Kernel-internal version of the attrlist cursor.
  */
 typedef struct attrlist_cursor_kern {
@@ -148,20 +98,41 @@ typedef struct attrlist_cursor_kern {
 
 
 /*========================================================================
- * Function prototypes for the kernel.
+ * Structure used to pass context around among the routines.
  *========================================================================*/
 
-struct xfs_inode;
-struct attrlist_cursor_kern;
-struct xfs_da_args;
+
+typedef int (*put_listent_func_t)(struct xfs_attr_list_context *, int,
+				      char *, int, int, char *);
+
+typedef struct xfs_attr_list_context {
+	struct xfs_inode		*dp;		/* inode */
+	struct attrlist_cursor_kern	*cursor;	/* position in list */
+	char				*alist;		/* output buffer */
+	int				seen_enough;	/* T/F: seen enough of list? */
+	ssize_t				count;		/* num used entries */
+	int				dupcnt;		/* count dup hashvals seen */
+	int				bufsize;	/* total buffer size */
+	int				firstu;		/* first used byte in buffer */
+	int				flags;		/* from VOP call */
+	int				resynch;	/* T/F: resynch with cursor */
+	int				put_value;	/* T/F: need value for listent */
+	put_listent_func_t		put_listent;	/* list output fmt function */
+	int				index;		/* index into output buffer */
+} xfs_attr_list_context_t;
+
+
+/*========================================================================
+ * Function prototypes for the kernel.
+ *========================================================================*/
 
 /*
  * Overall external interface routines.
  */
+int xfs_attr_calc_size(struct xfs_inode *, int, int, int *);
 int xfs_attr_inactive(struct xfs_inode *dp);
-
-int xfs_attr_shortform_getvalue(struct xfs_da_args *);
 int xfs_attr_fetch(struct xfs_inode *, struct xfs_name *, char *, int *, int);
 int xfs_attr_rmtval_get(struct xfs_da_args *args);
+int xfs_attr_list_int(struct xfs_attr_list_context *);
 
 #endif	/* __XFS_ATTR_H__ */
diff --git a/fs/xfs/xfs_attr_leaf.c b/fs/xfs/xfs_attr_leaf.c
index 303d41e4217b..79da6b2ea99e 100644
--- a/fs/xfs/xfs_attr_leaf.c
+++ b/fs/xfs/xfs_attr_leaf.c
@@ -94,13 +94,6 @@ STATIC int xfs_attr_leaf_entsize(xfs_attr_leafblock_t *leaf, int index);
  * Namespace helper routines
  *========================================================================*/
 
-STATIC_INLINE attrnames_t *
-xfs_attr_flags_namesp(int flags)
-{
-	return ((flags & XFS_ATTR_SECURE) ? &attr_secure:
-		  ((flags & XFS_ATTR_ROOT) ? &attr_trusted : &attr_user));
-}
-
 /*
  * If namespace bits don't match return 0.
  * If all match then return 1.
@@ -111,25 +104,6 @@ xfs_attr_namesp_match(int arg_flags, int ondisk_flags)
 	return XFS_ATTR_NSP_ONDISK(ondisk_flags) == XFS_ATTR_NSP_ARGS_TO_ONDISK(arg_flags);
 }
 
-/*
- * If namespace bits don't match and we don't have an override for it
- * then return 0.
- * If all match or are overridable then return 1.
- */
-STATIC_INLINE int
-xfs_attr_namesp_match_overrides(int arg_flags, int ondisk_flags)
-{
-	if (((arg_flags & ATTR_SECURE) == 0) !=
-	    ((ondisk_flags & XFS_ATTR_SECURE) == 0) &&
-	    !(arg_flags & ATTR_KERNORMALS))
-		return 0;
-	if (((arg_flags & ATTR_ROOT) == 0) !=
-	    ((ondisk_flags & XFS_ATTR_ROOT) == 0) &&
-	    !(arg_flags & ATTR_KERNROOTLS))
-		return 0;
-	return 1;
-}
-
 
 /*========================================================================
  * External routines when attribute fork size < XFS_LITINO(mp).
@@ -369,9 +343,10 @@ xfs_attr_shortform_remove(xfs_da_args_t *args)
 	 * Fix up the start offset of the attribute fork
 	 */
 	totsize -= size;
-	if (totsize == sizeof(xfs_attr_sf_hdr_t) && !args->addname &&
-	    (mp->m_flags & XFS_MOUNT_ATTR2) && 
-	    (dp->i_d.di_format != XFS_DINODE_FMT_BTREE)) {
+	if (totsize == sizeof(xfs_attr_sf_hdr_t) &&
+				!(args->op_flags & XFS_DA_OP_ADDNAME) &&
+				(mp->m_flags & XFS_MOUNT_ATTR2) &&
+				(dp->i_d.di_format != XFS_DINODE_FMT_BTREE)) {
 		/*
 		 * Last attribute now removed, revert to original
 		 * inode format making all literal area available
@@ -389,9 +364,10 @@ xfs_attr_shortform_remove(xfs_da_args_t *args)
 		xfs_idata_realloc(dp, -size, XFS_ATTR_FORK);
 		dp->i_d.di_forkoff = xfs_attr_shortform_bytesfit(dp, totsize);
 		ASSERT(dp->i_d.di_forkoff);
-		ASSERT(totsize > sizeof(xfs_attr_sf_hdr_t) || args->addname ||
-			!(mp->m_flags & XFS_MOUNT_ATTR2) ||
-			dp->i_d.di_format == XFS_DINODE_FMT_BTREE);
+		ASSERT(totsize > sizeof(xfs_attr_sf_hdr_t) ||
+				(args->op_flags & XFS_DA_OP_ADDNAME) ||
+				!(mp->m_flags & XFS_MOUNT_ATTR2) ||
+				dp->i_d.di_format == XFS_DINODE_FMT_BTREE);
 		dp->i_afp->if_ext_max =
 			XFS_IFORK_ASIZE(dp) / (uint)sizeof(xfs_bmbt_rec_t);
 		dp->i_df.if_ext_max =
@@ -531,7 +507,7 @@ xfs_attr_shortform_to_leaf(xfs_da_args_t *args)
 	nargs.total = args->total;
 	nargs.whichfork = XFS_ATTR_FORK;
 	nargs.trans = args->trans;
-	nargs.oknoent = 1;
+	nargs.op_flags = XFS_DA_OP_OKNOENT;
 
 	sfe = &sf->list[0];
 	for (i = 0; i < sf->hdr.count; i++) {
@@ -555,7 +531,7 @@ xfs_attr_shortform_to_leaf(xfs_da_args_t *args)
 out:
 	if(bp)
 		xfs_da_buf_done(bp);
-	kmem_free(tmpbuffer, size);
+	kmem_free(tmpbuffer);
 	return(error);
 }
 
@@ -624,15 +600,8 @@ xfs_attr_shortform_list(xfs_attr_list_context_t *context)
 	    (XFS_ISRESET_CURSOR(cursor) &&
              (dp->i_afp->if_bytes + sf->hdr.count * 16) < context->bufsize)) {
 		for (i = 0, sfe = &sf->list[0]; i < sf->hdr.count; i++) {
-			attrnames_t	*namesp;
-
-			if (!xfs_attr_namesp_match_overrides(context->flags, sfe->flags)) {
-				sfe = XFS_ATTR_SF_NEXTENTRY(sfe);
-				continue;
-			}
-			namesp = xfs_attr_flags_namesp(sfe->flags);
 			error = context->put_listent(context,
-					   namesp,
+					   sfe->flags,
 					   (char *)sfe->nameval,
 					   (int)sfe->namelen,
 					   (int)sfe->valuelen,
@@ -676,13 +645,10 @@ xfs_attr_shortform_list(xfs_attr_list_context_t *context)
 					     XFS_ERRLEVEL_LOW,
 					     context->dp->i_mount, sfe);
 			xfs_attr_trace_l_c("sf corrupted", context);
-			kmem_free(sbuf, sbsize);
+			kmem_free(sbuf);
 			return XFS_ERROR(EFSCORRUPTED);
 		}
-		if (!xfs_attr_namesp_match_overrides(context->flags, sfe->flags)) {
-			sfe = XFS_ATTR_SF_NEXTENTRY(sfe);
-			continue;
-		}
+
 		sbp->entno = i;
 		sbp->hash = xfs_da_hashname((char *)sfe->nameval, sfe->namelen);
 		sbp->name = (char *)sfe->nameval;
@@ -717,7 +683,7 @@ xfs_attr_shortform_list(xfs_attr_list_context_t *context)
 		}
 	}
 	if (i == nsbuf) {
-		kmem_free(sbuf, sbsize);
+		kmem_free(sbuf);
 		xfs_attr_trace_l_c("blk end", context);
 		return(0);
 	}
@@ -726,16 +692,12 @@ xfs_attr_shortform_list(xfs_attr_list_context_t *context)
 	 * Loop putting entries into the user buffer.
 	 */
 	for ( ; i < nsbuf; i++, sbp++) {
-		attrnames_t	*namesp;
-
-		namesp = xfs_attr_flags_namesp(sbp->flags);
-
 		if (cursor->hashval != sbp->hash) {
 			cursor->hashval = sbp->hash;
 			cursor->offset = 0;
 		}
 		error = context->put_listent(context,
-					namesp,
+					sbp->flags,
 					sbp->name,
 					sbp->namelen,
 					sbp->valuelen,
@@ -747,7 +709,7 @@ xfs_attr_shortform_list(xfs_attr_list_context_t *context)
 		cursor->offset++;
 	}
 
-	kmem_free(sbuf, sbsize);
+	kmem_free(sbuf);
 	xfs_attr_trace_l_c("sf E-O-F", context);
 	return(0);
 }
@@ -853,7 +815,7 @@ xfs_attr_leaf_to_shortform(xfs_dabuf_t *bp, xfs_da_args_t *args, int forkoff)
 	nargs.total = args->total;
 	nargs.whichfork = XFS_ATTR_FORK;
 	nargs.trans = args->trans;
-	nargs.oknoent = 1;
+	nargs.op_flags = XFS_DA_OP_OKNOENT;
 	entry = &leaf->entries[0];
 	for (i = 0; i < be16_to_cpu(leaf->hdr.count); entry++, i++) {
 		if (entry->flags & XFS_ATTR_INCOMPLETE)
@@ -873,7 +835,7 @@ xfs_attr_leaf_to_shortform(xfs_dabuf_t *bp, xfs_da_args_t *args, int forkoff)
 	error = 0;
 
 out:
-	kmem_free(tmpbuffer, XFS_LBSIZE(dp->i_mount));
+	kmem_free(tmpbuffer);
 	return(error);
 }
 
@@ -1155,7 +1117,7 @@ xfs_attr_leaf_add_work(xfs_dabuf_t *bp, xfs_da_args_t *args, int mapindex)
 	entry->hashval = cpu_to_be32(args->hashval);
 	entry->flags = tmp ? XFS_ATTR_LOCAL : 0;
 	entry->flags |= XFS_ATTR_NSP_ARGS_TO_ONDISK(args->flags);
-	if (args->rename) {
+	if (args->op_flags & XFS_DA_OP_RENAME) {
 		entry->flags |= XFS_ATTR_INCOMPLETE;
 		if ((args->blkno2 == args->blkno) &&
 		    (args->index2 <= args->index)) {
@@ -1271,7 +1233,7 @@ xfs_attr_leaf_compact(xfs_trans_t *trans, xfs_dabuf_t *bp)
 				be16_to_cpu(hdr_s->count), mp);
 	xfs_da_log_buf(trans, bp, 0, XFS_LBSIZE(mp) - 1);
 
-	kmem_free(tmpbuffer, XFS_LBSIZE(mp));
+	kmem_free(tmpbuffer);
 }
 
 /*
@@ -1921,7 +1883,7 @@ xfs_attr_leaf_unbalance(xfs_da_state_t *state, xfs_da_state_blk_t *drop_blk,
 				be16_to_cpu(drop_hdr->count), mp);
 		}
 		memcpy((char *)save_leaf, (char *)tmp_leaf, state->blocksize);
-		kmem_free(tmpbuffer, state->blocksize);
+		kmem_free(tmpbuffer);
 	}
 
 	xfs_da_log_buf(state->args->trans, save_blk->bp, 0,
@@ -2400,8 +2362,6 @@ xfs_attr_leaf_list_int(xfs_dabuf_t *bp, xfs_attr_list_context_t *context)
 	 */
 	retval = 0;
 	for (  ; (i < be16_to_cpu(leaf->hdr.count)); entry++, i++) {
-		attrnames_t *namesp;
-
 		if (be32_to_cpu(entry->hashval) != cursor->hashval) {
 			cursor->hashval = be32_to_cpu(entry->hashval);
 			cursor->offset = 0;
@@ -2409,17 +2369,13 @@ xfs_attr_leaf_list_int(xfs_dabuf_t *bp, xfs_attr_list_context_t *context)
 
 		if (entry->flags & XFS_ATTR_INCOMPLETE)
 			continue;		/* skip incomplete entries */
-		if (!xfs_attr_namesp_match_overrides(context->flags, entry->flags))
-			continue;
-
-		namesp = xfs_attr_flags_namesp(entry->flags);
 
 		if (entry->flags & XFS_ATTR_LOCAL) {
 			xfs_attr_leaf_name_local_t *name_loc =
 				XFS_ATTR_LEAF_NAME_LOCAL(leaf, i);
 
 			retval = context->put_listent(context,
-						namesp,
+						entry->flags,
 						(char *)name_loc->nameval,
 						(int)name_loc->namelen,
 						be16_to_cpu(name_loc->valuelen),
@@ -2446,16 +2402,15 @@ xfs_attr_leaf_list_int(xfs_dabuf_t *bp, xfs_attr_list_context_t *context)
 				if (retval)
 					return retval;
 				retval = context->put_listent(context,
-						namesp,
+						entry->flags,
 						(char *)name_rmt->name,
 						(int)name_rmt->namelen,
 						valuelen,
 						(char*)args.value);
-				kmem_free(args.value, valuelen);
-			}
-			else {
+				kmem_free(args.value);
+			} else {
 				retval = context->put_listent(context,
-						namesp,
+						entry->flags,
 						(char *)name_rmt->name,
 						(int)name_rmt->namelen,
 						valuelen,
@@ -2543,9 +2498,7 @@ xfs_attr_leaf_clearflag(xfs_da_args_t *args)
 	/*
 	 * Commit the flag value change and start the next trans in series.
 	 */
-	error = xfs_attr_rolltrans(&args->trans, args->dp);
-
-	return(error);
+	return xfs_trans_roll(&args->trans, args->dp);
 }
 
 /*
@@ -2592,9 +2545,7 @@ xfs_attr_leaf_setflag(xfs_da_args_t *args)
 	/*
 	 * Commit the flag value change and start the next trans in series.
 	 */
-	error = xfs_attr_rolltrans(&args->trans, args->dp);
-
-	return(error);
+	return xfs_trans_roll(&args->trans, args->dp);
 }
 
 /*
@@ -2710,7 +2661,7 @@ xfs_attr_leaf_flipflags(xfs_da_args_t *args)
 	/*
 	 * Commit the flag value change and start the next trans in series.
 	 */
-	error = xfs_attr_rolltrans(&args->trans, args->dp);
+	error = xfs_trans_roll(&args->trans, args->dp);
 
 	return(error);
 }
@@ -2768,7 +2719,7 @@ xfs_attr_root_inactive(xfs_trans_t **trans, xfs_inode_t *dp)
 	/*
 	 * Commit the invalidate and start the next transaction.
 	 */
-	error = xfs_attr_rolltrans(trans, dp);
+	error = xfs_trans_roll(trans, dp);
 
 	return (error);
 }
@@ -2870,7 +2821,8 @@ xfs_attr_node_inactive(xfs_trans_t **trans, xfs_inode_t *dp, xfs_dabuf_t *bp,
 		/*
 		 * Atomically commit the whole invalidate stuff.
 		 */
-		if ((error = xfs_attr_rolltrans(trans, dp)))
+		error = xfs_trans_roll(trans, dp);
+		if (error)
 			return (error);
 	}
 
@@ -2954,7 +2906,7 @@ xfs_attr_leaf_inactive(xfs_trans_t **trans, xfs_inode_t *dp, xfs_dabuf_t *bp)
 			error = tmp;	/* save only the 1st errno */
 	}
 
-	kmem_free((xfs_caddr_t)list, size);
+	kmem_free((xfs_caddr_t)list);
 	return(error);
 }
 
@@ -3009,7 +2961,8 @@ xfs_attr_leaf_freextent(xfs_trans_t **trans, xfs_inode_t *dp,
 			/*
 			 * Roll to next transaction.
 			 */
-			if ((error = xfs_attr_rolltrans(trans, dp)))
+			error = xfs_trans_roll(trans, dp);
+			if (error)
 				return (error);
 		}
 
@@ -3019,60 +2972,3 @@ xfs_attr_leaf_freextent(xfs_trans_t **trans, xfs_inode_t *dp,
 
 	return(0);
 }
-
-
-/*
- * Roll from one trans in the sequence of PERMANENT transactions to the next.
- */
-int
-xfs_attr_rolltrans(xfs_trans_t **transp, xfs_inode_t *dp)
-{
-	xfs_trans_t *trans;
-	unsigned int logres, count;
-	int	error;
-
-	/*
-	 * Ensure that the inode is always logged.
-	 */
-	trans = *transp;
-	xfs_trans_log_inode(trans, dp, XFS_ILOG_CORE);
-
-	/*
-	 * Copy the critical parameters from one trans to the next.
-	 */
-	logres = trans->t_log_res;
-	count = trans->t_log_count;
-	*transp = xfs_trans_dup(trans);
-
-	/*
-	 * Commit the current transaction.
-	 * If this commit failed, then it'd just unlock those items that
-	 * are not marked ihold. That also means that a filesystem shutdown
-	 * is in progress. The caller takes the responsibility to cancel
-	 * the duplicate transaction that gets returned.
-	 */
-	if ((error = xfs_trans_commit(trans, 0)))
-		return (error);
-
-	trans = *transp;
-
-	/*
-	 * Reserve space in the log for th next transaction.
-	 * This also pushes items in the "AIL", the list of logged items,
-	 * out to disk if they are taking up space at the tail of the log
-	 * that we want to use.  This requires that either nothing be locked
-	 * across this call, or that anything that is locked be logged in
-	 * the prior and the next transactions.
-	 */
-	error = xfs_trans_reserve(trans, 0, logres, 0,
-				  XFS_TRANS_PERM_LOG_RES, count);
-	/*
-	 *  Ensure that the inode is in the new transaction and locked.
-	 */
-	if (!error) {
-		xfs_trans_ijoin(trans, dp, XFS_ILOCK_EXCL);
-		xfs_trans_ihold(trans, dp);
-	}
-	return (error);
-
-}
diff --git a/fs/xfs/xfs_attr_leaf.h b/fs/xfs/xfs_attr_leaf.h
index 040f732ce1e2..83e9af417ca2 100644
--- a/fs/xfs/xfs_attr_leaf.h
+++ b/fs/xfs/xfs_attr_leaf.h
@@ -30,7 +30,7 @@
 
 struct attrlist;
 struct attrlist_cursor_kern;
-struct attrnames;
+struct xfs_attr_list_context;
 struct xfs_dabuf;
 struct xfs_da_args;
 struct xfs_da_state;
@@ -204,33 +204,6 @@ static inline int xfs_attr_leaf_entsize_local_max(int bsize)
 	return (((bsize) >> 1) + ((bsize) >> 2));
 }
 
-
-/*========================================================================
- * Structure used to pass context around among the routines.
- *========================================================================*/
-
-
-struct xfs_attr_list_context;
-
-typedef int (*put_listent_func_t)(struct xfs_attr_list_context *, struct attrnames *,
-				      char *, int, int, char *);
-
-typedef struct xfs_attr_list_context {
-	struct xfs_inode		*dp;		/* inode */
-	struct attrlist_cursor_kern	*cursor;	/* position in list */
-	struct attrlist			*alist;		/* output buffer */
-	int				seen_enough;	/* T/F: seen enough of list? */
-	int				count;		/* num used entries */
-	int				dupcnt;		/* count dup hashvals seen */
-	int				bufsize;	/* total buffer size */
-	int				firstu;		/* first used byte in buffer */
-	int				flags;		/* from VOP call */
-	int				resynch;	/* T/F: resynch with cursor */
-	int				put_value;	/* T/F: need value for listent */
-	put_listent_func_t		put_listent;	/* list output fmt function */
-	int				index;		/* index into output buffer */
-} xfs_attr_list_context_t;
-
 /*
  * Used to keep a list of "remote value" extents when unlinking an inode.
  */
@@ -301,6 +274,4 @@ int	xfs_attr_leaf_order(struct xfs_dabuf *leaf1_bp,
 				   struct xfs_dabuf *leaf2_bp);
 int	xfs_attr_leaf_newentsize(int namelen, int valuelen, int blocksize,
 					int *local);
-int	xfs_attr_rolltrans(struct xfs_trans **transp, struct xfs_inode *dp);
-
 #endif	/* __XFS_ATTR_LEAF_H__ */
diff --git a/fs/xfs/xfs_attr_sf.h b/fs/xfs/xfs_attr_sf.h
index f67f917803b1..ea22839caed2 100644
--- a/fs/xfs/xfs_attr_sf.h
+++ b/fs/xfs/xfs_attr_sf.h
@@ -97,13 +97,9 @@ void xfs_attr_trace_l_cb(char *where, struct xfs_attr_list_context *context,
 void xfs_attr_trace_l_cl(char *where, struct xfs_attr_list_context *context,
 			      struct xfs_attr_leafblock *leaf);
 void xfs_attr_trace_enter(int type, char *where,
-			     __psunsigned_t a2, __psunsigned_t a3,
-			     __psunsigned_t a4, __psunsigned_t a5,
-			     __psunsigned_t a6, __psunsigned_t a7,
-			     __psunsigned_t a8, __psunsigned_t a9,
-			     __psunsigned_t a10, __psunsigned_t a11,
-			     __psunsigned_t a12, __psunsigned_t a13,
-			     __psunsigned_t a14, __psunsigned_t a15);
+			     struct xfs_attr_list_context *context,
+			     __psunsigned_t a13, __psunsigned_t a14,
+			     __psunsigned_t a15);
 #else
 #define	xfs_attr_trace_l_c(w,c)
 #define	xfs_attr_trace_l_cn(w,c,n)
diff --git a/fs/xfs/xfs_bit.c b/fs/xfs/xfs_bit.c
index fab0b6d5a41b..48228848f5ae 100644
--- a/fs/xfs/xfs_bit.c
+++ b/fs/xfs/xfs_bit.c
@@ -25,109 +25,6 @@
  * XFS bit manipulation routines, used in non-realtime code.
  */
 
-#ifndef HAVE_ARCH_HIGHBIT
-/*
- * Index of high bit number in byte, -1 for none set, 0..7 otherwise.
- */
-static const char xfs_highbit[256] = {
-       -1, 0, 1, 1, 2, 2, 2, 2,			/* 00 .. 07 */
-	3, 3, 3, 3, 3, 3, 3, 3,			/* 08 .. 0f */
-	4, 4, 4, 4, 4, 4, 4, 4,			/* 10 .. 17 */
-	4, 4, 4, 4, 4, 4, 4, 4,			/* 18 .. 1f */
-	5, 5, 5, 5, 5, 5, 5, 5,			/* 20 .. 27 */
-	5, 5, 5, 5, 5, 5, 5, 5,			/* 28 .. 2f */
-	5, 5, 5, 5, 5, 5, 5, 5,			/* 30 .. 37 */
-	5, 5, 5, 5, 5, 5, 5, 5,			/* 38 .. 3f */
-	6, 6, 6, 6, 6, 6, 6, 6,			/* 40 .. 47 */
-	6, 6, 6, 6, 6, 6, 6, 6,			/* 48 .. 4f */
-	6, 6, 6, 6, 6, 6, 6, 6,			/* 50 .. 57 */
-	6, 6, 6, 6, 6, 6, 6, 6,			/* 58 .. 5f */
-	6, 6, 6, 6, 6, 6, 6, 6,			/* 60 .. 67 */
-	6, 6, 6, 6, 6, 6, 6, 6,			/* 68 .. 6f */
-	6, 6, 6, 6, 6, 6, 6, 6,			/* 70 .. 77 */
-	6, 6, 6, 6, 6, 6, 6, 6,			/* 78 .. 7f */
-	7, 7, 7, 7, 7, 7, 7, 7,			/* 80 .. 87 */
-	7, 7, 7, 7, 7, 7, 7, 7,			/* 88 .. 8f */
-	7, 7, 7, 7, 7, 7, 7, 7,			/* 90 .. 97 */
-	7, 7, 7, 7, 7, 7, 7, 7,			/* 98 .. 9f */
-	7, 7, 7, 7, 7, 7, 7, 7,			/* a0 .. a7 */
-	7, 7, 7, 7, 7, 7, 7, 7,			/* a8 .. af */
-	7, 7, 7, 7, 7, 7, 7, 7,			/* b0 .. b7 */
-	7, 7, 7, 7, 7, 7, 7, 7,			/* b8 .. bf */
-	7, 7, 7, 7, 7, 7, 7, 7,			/* c0 .. c7 */
-	7, 7, 7, 7, 7, 7, 7, 7,			/* c8 .. cf */
-	7, 7, 7, 7, 7, 7, 7, 7,			/* d0 .. d7 */
-	7, 7, 7, 7, 7, 7, 7, 7,			/* d8 .. df */
-	7, 7, 7, 7, 7, 7, 7, 7,			/* e0 .. e7 */
-	7, 7, 7, 7, 7, 7, 7, 7,			/* e8 .. ef */
-	7, 7, 7, 7, 7, 7, 7, 7,			/* f0 .. f7 */
-	7, 7, 7, 7, 7, 7, 7, 7,			/* f8 .. ff */
-};
-#endif
-
-/*
- * xfs_highbit32: get high bit set out of 32-bit argument, -1 if none set.
- */
-inline int
-xfs_highbit32(
-	__uint32_t	v)
-{
-#ifdef HAVE_ARCH_HIGHBIT
-	return highbit32(v);
-#else
-	int		i;
-
-	if (v & 0xffff0000)
-		if (v & 0xff000000)
-			i = 24;
-		else
-			i = 16;
-	else if (v & 0x0000ffff)
-		if (v & 0x0000ff00)
-			i = 8;
-		else
-			i = 0;
-	else
-		return -1;
-	return i + xfs_highbit[(v >> i) & 0xff];
-#endif
-}
-
-/*
- * xfs_lowbit64: get low bit set out of 64-bit argument, -1 if none set.
- */
-int
-xfs_lowbit64(
-	__uint64_t	v)
-{
-	__uint32_t	w = (__uint32_t)v;
-	int		n = 0;
-
-	if (w) {	/* lower bits */
-		n = ffs(w);
-	} else {	/* upper bits */
-		w = (__uint32_t)(v >> 32);
-		if (w && (n = ffs(w)))
-			n += 32;
-	}
-	return n - 1;
-}
-
-/*
- * xfs_highbit64: get high bit set out of 64-bit argument, -1 if none set.
- */
-int
-xfs_highbit64(
-	__uint64_t	v)
-{
-	__uint32_t	h = (__uint32_t)(v >> 32);
-
-	if (h)
-		return xfs_highbit32(h) + 32;
-	return xfs_highbit32((__uint32_t)v);
-}
-
-
 /*
  * Return whether bitmap is empty.
  * Size is number of words in the bitmap, which is padded to word boundary
diff --git a/fs/xfs/xfs_bit.h b/fs/xfs/xfs_bit.h
index 082641a9782c..8e0e463dae2d 100644
--- a/fs/xfs/xfs_bit.h
+++ b/fs/xfs/xfs_bit.h
@@ -47,13 +47,39 @@ static inline __uint64_t xfs_mask64lo(int n)
 }
 
 /* Get high bit set out of 32-bit argument, -1 if none set */
-extern int xfs_highbit32(__uint32_t v);
+static inline int xfs_highbit32(__uint32_t v)
+{
+	return fls(v) - 1;
+}
+
+/* Get high bit set out of 64-bit argument, -1 if none set */
+static inline int xfs_highbit64(__uint64_t v)
+{
+	return fls64(v) - 1;
+}
+
+/* Get low bit set out of 32-bit argument, -1 if none set */
+static inline int xfs_lowbit32(__uint32_t v)
+{
+	unsigned long	t = v;
+	return (v) ? find_first_bit(&t, 32) : -1;
+}
 
 /* Get low bit set out of 64-bit argument, -1 if none set */
-extern int xfs_lowbit64(__uint64_t v);
+static inline int xfs_lowbit64(__uint64_t v)
+{
+	__uint32_t	w = (__uint32_t)v;
+	int		n = 0;
 
-/* Get high bit set out of 64-bit argument, -1 if none set */
-extern int xfs_highbit64(__uint64_t);
+	if (w) {	/* lower bits */
+		n = ffs(w);
+	} else {	/* upper bits */
+		w = (__uint32_t)(v >> 32);
+		if (w && (n = ffs(w)))
+		n += 32;
+	}
+	return n - 1;
+}
 
 /* Return whether bitmap is empty (1 == empty) */
 extern int xfs_bitmap_empty(uint *map, uint size);
diff --git a/fs/xfs/xfs_bmap.c b/fs/xfs/xfs_bmap.c
index 53c259f5a5af..a1aab9275d5a 100644
--- a/fs/xfs/xfs_bmap.c
+++ b/fs/xfs/xfs_bmap.c
@@ -384,14 +384,14 @@ xfs_bmap_count_tree(
 	int             levelin,
 	int		*count);
 
-STATIC int
+STATIC void
 xfs_bmap_count_leaves(
 	xfs_ifork_t		*ifp,
 	xfs_extnum_t		idx,
 	int			numrecs,
 	int			*count);
 
-STATIC int
+STATIC void
 xfs_bmap_disk_count_leaves(
 	xfs_extnum_t		idx,
 	xfs_bmbt_block_t	*block,
@@ -428,7 +428,8 @@ xfs_bmap_add_attrfork_btree(
 		cur->bc_private.b.firstblock = *firstblock;
 		if ((error = xfs_bmbt_lookup_ge(cur, 0, 0, 0, &stat)))
 			goto error0;
-		ASSERT(stat == 1);	/* must be at least one entry */
+		/* must be at least one entry */
+		XFS_WANT_CORRUPTED_GOTO(stat == 1, error0);
 		if ((error = xfs_bmbt_newroot(cur, flags, &stat)))
 			goto error0;
 		if (stat == 0) {
@@ -816,13 +817,13 @@ xfs_bmap_add_extent_delay_real(
 					RIGHT.br_startblock,
 					RIGHT.br_blockcount, &i)))
 				goto done;
-			ASSERT(i == 1);
+			XFS_WANT_CORRUPTED_GOTO(i == 1, done);
 			if ((error = xfs_bmbt_delete(cur, &i)))
 				goto done;
-			ASSERT(i == 1);
+			XFS_WANT_CORRUPTED_GOTO(i == 1, done);
 			if ((error = xfs_bmbt_decrement(cur, 0, &i)))
 				goto done;
-			ASSERT(i == 1);
+			XFS_WANT_CORRUPTED_GOTO(i == 1, done);
 			if ((error = xfs_bmbt_update(cur, LEFT.br_startoff,
 					LEFT.br_startblock,
 					LEFT.br_blockcount +
@@ -860,7 +861,7 @@ xfs_bmap_add_extent_delay_real(
 					LEFT.br_startblock, LEFT.br_blockcount,
 					&i)))
 				goto done;
-			ASSERT(i == 1);
+			XFS_WANT_CORRUPTED_GOTO(i == 1, done);
 			if ((error = xfs_bmbt_update(cur, LEFT.br_startoff,
 					LEFT.br_startblock,
 					LEFT.br_blockcount +
@@ -895,7 +896,7 @@ xfs_bmap_add_extent_delay_real(
 					RIGHT.br_startblock,
 					RIGHT.br_blockcount, &i)))
 				goto done;
-			ASSERT(i == 1);
+			XFS_WANT_CORRUPTED_GOTO(i == 1, done);
 			if ((error = xfs_bmbt_update(cur, PREV.br_startoff,
 					new->br_startblock,
 					PREV.br_blockcount +
@@ -928,11 +929,11 @@ xfs_bmap_add_extent_delay_real(
 					new->br_startblock, new->br_blockcount,
 					&i)))
 				goto done;
-			ASSERT(i == 0);
+			XFS_WANT_CORRUPTED_GOTO(i == 0, done);
 			cur->bc_rec.b.br_state = XFS_EXT_NORM;
 			if ((error = xfs_bmbt_insert(cur, &i)))
 				goto done;
-			ASSERT(i == 1);
+			XFS_WANT_CORRUPTED_GOTO(i == 1, done);
 		}
 		*dnew = 0;
 		/* DELTA: The in-core extent described by new changed type. */
@@ -963,7 +964,7 @@ xfs_bmap_add_extent_delay_real(
 					LEFT.br_startblock, LEFT.br_blockcount,
 					&i)))
 				goto done;
-			ASSERT(i == 1);
+			XFS_WANT_CORRUPTED_GOTO(i == 1, done);
 			if ((error = xfs_bmbt_update(cur, LEFT.br_startoff,
 					LEFT.br_startblock,
 					LEFT.br_blockcount +
@@ -1004,11 +1005,11 @@ xfs_bmap_add_extent_delay_real(
 					new->br_startblock, new->br_blockcount,
 					&i)))
 				goto done;
-			ASSERT(i == 0);
+			XFS_WANT_CORRUPTED_GOTO(i == 0, done);
 			cur->bc_rec.b.br_state = XFS_EXT_NORM;
 			if ((error = xfs_bmbt_insert(cur, &i)))
 				goto done;
-			ASSERT(i == 1);
+			XFS_WANT_CORRUPTED_GOTO(i == 1, done);
 		}
 		if (ip->i_d.di_format == XFS_DINODE_FMT_EXTENTS &&
 		    ip->i_d.di_nextents > ip->i_df.if_ext_max) {
@@ -1054,7 +1055,7 @@ xfs_bmap_add_extent_delay_real(
 					RIGHT.br_startblock,
 					RIGHT.br_blockcount, &i)))
 				goto done;
-			ASSERT(i == 1);
+			XFS_WANT_CORRUPTED_GOTO(i == 1, done);
 			if ((error = xfs_bmbt_update(cur, new->br_startoff,
 					new->br_startblock,
 					new->br_blockcount +
@@ -1094,11 +1095,11 @@ xfs_bmap_add_extent_delay_real(
 					new->br_startblock, new->br_blockcount,
 					&i)))
 				goto done;
-			ASSERT(i == 0);
+			XFS_WANT_CORRUPTED_GOTO(i == 0, done);
 			cur->bc_rec.b.br_state = XFS_EXT_NORM;
 			if ((error = xfs_bmbt_insert(cur, &i)))
 				goto done;
-			ASSERT(i == 1);
+			XFS_WANT_CORRUPTED_GOTO(i == 1, done);
 		}
 		if (ip->i_d.di_format == XFS_DINODE_FMT_EXTENTS &&
 		    ip->i_d.di_nextents > ip->i_df.if_ext_max) {
@@ -1149,11 +1150,11 @@ xfs_bmap_add_extent_delay_real(
 					new->br_startblock, new->br_blockcount,
 					&i)))
 				goto done;
-			ASSERT(i == 0);
+			XFS_WANT_CORRUPTED_GOTO(i == 0, done);
 			cur->bc_rec.b.br_state = XFS_EXT_NORM;
 			if ((error = xfs_bmbt_insert(cur, &i)))
 				goto done;
-			ASSERT(i == 1);
+			XFS_WANT_CORRUPTED_GOTO(i == 1, done);
 		}
 		if (ip->i_d.di_format == XFS_DINODE_FMT_EXTENTS &&
 		    ip->i_d.di_nextents > ip->i_df.if_ext_max) {
@@ -1377,19 +1378,19 @@ xfs_bmap_add_extent_unwritten_real(
 					RIGHT.br_startblock,
 					RIGHT.br_blockcount, &i)))
 				goto done;
-			ASSERT(i == 1);
+			XFS_WANT_CORRUPTED_GOTO(i == 1, done);
 			if ((error = xfs_bmbt_delete(cur, &i)))
 				goto done;
-			ASSERT(i == 1);
+			XFS_WANT_CORRUPTED_GOTO(i == 1, done);
 			if ((error = xfs_bmbt_decrement(cur, 0, &i)))
 				goto done;
-			ASSERT(i == 1);
+			XFS_WANT_CORRUPTED_GOTO(i == 1, done);
 			if ((error = xfs_bmbt_delete(cur, &i)))
 				goto done;
-			ASSERT(i == 1);
+			XFS_WANT_CORRUPTED_GOTO(i == 1, done);
 			if ((error = xfs_bmbt_decrement(cur, 0, &i)))
 				goto done;
-			ASSERT(i == 1);
+			XFS_WANT_CORRUPTED_GOTO(i == 1, done);
 			if ((error = xfs_bmbt_update(cur, LEFT.br_startoff,
 				LEFT.br_startblock,
 				LEFT.br_blockcount + PREV.br_blockcount +
@@ -1426,13 +1427,13 @@ xfs_bmap_add_extent_unwritten_real(
 					PREV.br_startblock, PREV.br_blockcount,
 					&i)))
 				goto done;
-			ASSERT(i == 1);
+			XFS_WANT_CORRUPTED_GOTO(i == 1, done);
 			if ((error = xfs_bmbt_delete(cur, &i)))
 				goto done;
-			ASSERT(i == 1);
+			XFS_WANT_CORRUPTED_GOTO(i == 1, done);
 			if ((error = xfs_bmbt_decrement(cur, 0, &i)))
 				goto done;
-			ASSERT(i == 1);
+			XFS_WANT_CORRUPTED_GOTO(i == 1, done);
 			if ((error = xfs_bmbt_update(cur, LEFT.br_startoff,
 				LEFT.br_startblock,
 				LEFT.br_blockcount + PREV.br_blockcount,
@@ -1469,13 +1470,13 @@ xfs_bmap_add_extent_unwritten_real(
 					RIGHT.br_startblock,
 					RIGHT.br_blockcount, &i)))
 				goto done;
-			ASSERT(i == 1);
+			XFS_WANT_CORRUPTED_GOTO(i == 1, done);
 			if ((error = xfs_bmbt_delete(cur, &i)))
 				goto done;
-			ASSERT(i == 1);
+			XFS_WANT_CORRUPTED_GOTO(i == 1, done);
 			if ((error = xfs_bmbt_decrement(cur, 0, &i)))
 				goto done;
-			ASSERT(i == 1);
+			XFS_WANT_CORRUPTED_GOTO(i == 1, done);
 			if ((error = xfs_bmbt_update(cur, new->br_startoff,
 				new->br_startblock,
 				new->br_blockcount + RIGHT.br_blockcount,
@@ -1508,7 +1509,7 @@ xfs_bmap_add_extent_unwritten_real(
 					new->br_startblock, new->br_blockcount,
 					&i)))
 				goto done;
-			ASSERT(i == 1);
+			XFS_WANT_CORRUPTED_GOTO(i == 1, done);
 			if ((error = xfs_bmbt_update(cur, new->br_startoff,
 				new->br_startblock, new->br_blockcount,
 				newext)))
@@ -1549,7 +1550,7 @@ xfs_bmap_add_extent_unwritten_real(
 					PREV.br_startblock, PREV.br_blockcount,
 					&i)))
 				goto done;
-			ASSERT(i == 1);
+			XFS_WANT_CORRUPTED_GOTO(i == 1, done);
 			if ((error = xfs_bmbt_update(cur,
 				PREV.br_startoff + new->br_blockcount,
 				PREV.br_startblock + new->br_blockcount,
@@ -1596,7 +1597,7 @@ xfs_bmap_add_extent_unwritten_real(
 					PREV.br_startblock, PREV.br_blockcount,
 					&i)))
 				goto done;
-			ASSERT(i == 1);
+			XFS_WANT_CORRUPTED_GOTO(i == 1, done);
 			if ((error = xfs_bmbt_update(cur,
 				PREV.br_startoff + new->br_blockcount,
 				PREV.br_startblock + new->br_blockcount,
@@ -1606,7 +1607,7 @@ xfs_bmap_add_extent_unwritten_real(
 			cur->bc_rec.b = *new;
 			if ((error = xfs_bmbt_insert(cur, &i)))
 				goto done;
-			ASSERT(i == 1);
+			XFS_WANT_CORRUPTED_GOTO(i == 1, done);
 		}
 		/* DELTA: One in-core extent is split in two. */
 		temp = PREV.br_startoff;
@@ -1640,7 +1641,7 @@ xfs_bmap_add_extent_unwritten_real(
 					PREV.br_startblock,
 					PREV.br_blockcount, &i)))
 				goto done;
-			ASSERT(i == 1);
+			XFS_WANT_CORRUPTED_GOTO(i == 1, done);
 			if ((error = xfs_bmbt_update(cur, PREV.br_startoff,
 				PREV.br_startblock,
 				PREV.br_blockcount - new->br_blockcount,
@@ -1682,7 +1683,7 @@ xfs_bmap_add_extent_unwritten_real(
 					PREV.br_startblock, PREV.br_blockcount,
 					&i)))
 				goto done;
-			ASSERT(i == 1);
+			XFS_WANT_CORRUPTED_GOTO(i == 1, done);
 			if ((error = xfs_bmbt_update(cur, PREV.br_startoff,
 				PREV.br_startblock,
 				PREV.br_blockcount - new->br_blockcount,
@@ -1692,11 +1693,11 @@ xfs_bmap_add_extent_unwritten_real(
 					new->br_startblock, new->br_blockcount,
 					&i)))
 				goto done;
-			ASSERT(i == 0);
+			XFS_WANT_CORRUPTED_GOTO(i == 0, done);
 			cur->bc_rec.b.br_state = XFS_EXT_NORM;
 			if ((error = xfs_bmbt_insert(cur, &i)))
 				goto done;
-			ASSERT(i == 1);
+			XFS_WANT_CORRUPTED_GOTO(i == 1, done);
 		}
 		/* DELTA: One in-core extent is split in two. */
 		temp = PREV.br_startoff;
@@ -1732,27 +1733,34 @@ xfs_bmap_add_extent_unwritten_real(
 					PREV.br_startblock, PREV.br_blockcount,
 					&i)))
 				goto done;
-			ASSERT(i == 1);
+			XFS_WANT_CORRUPTED_GOTO(i == 1, done);
 			/* new right extent - oldext */
 			if ((error = xfs_bmbt_update(cur, r[1].br_startoff,
 				r[1].br_startblock, r[1].br_blockcount,
 				r[1].br_state)))
 				goto done;
 			/* new left extent - oldext */
-			PREV.br_blockcount =
-				new->br_startoff - PREV.br_startoff;
 			cur->bc_rec.b = PREV;
+			cur->bc_rec.b.br_blockcount =
+				new->br_startoff - PREV.br_startoff;
 			if ((error = xfs_bmbt_insert(cur, &i)))
 				goto done;
-			ASSERT(i == 1);
-			if ((error = xfs_bmbt_increment(cur, 0, &i)))
+			XFS_WANT_CORRUPTED_GOTO(i == 1, done);
+			/*
+			 * Reset the cursor to the position of the new extent
+			 * we are about to insert as we can't trust it after
+			 * the previous insert.
+			 */
+			if ((error = xfs_bmbt_lookup_eq(cur, new->br_startoff,
+					new->br_startblock, new->br_blockcount,
+					&i)))
 				goto done;
-			ASSERT(i == 1);
+			XFS_WANT_CORRUPTED_GOTO(i == 0, done);
 			/* new middle extent - newext */
-			cur->bc_rec.b = *new;
+			cur->bc_rec.b.br_state = new->br_state;
 			if ((error = xfs_bmbt_insert(cur, &i)))
 				goto done;
-			ASSERT(i == 1);
+			XFS_WANT_CORRUPTED_GOTO(i == 1, done);
 		}
 		/* DELTA: One in-core extent is split in three. */
 		temp = PREV.br_startoff;
@@ -2097,13 +2105,13 @@ xfs_bmap_add_extent_hole_real(
 					right.br_startblock,
 					right.br_blockcount, &i)))
 				goto done;
-			ASSERT(i == 1);
+			XFS_WANT_CORRUPTED_GOTO(i == 1, done);
 			if ((error = xfs_bmbt_delete(cur, &i)))
 				goto done;
-			ASSERT(i == 1);
+			XFS_WANT_CORRUPTED_GOTO(i == 1, done);
 			if ((error = xfs_bmbt_decrement(cur, 0, &i)))
 				goto done;
-			ASSERT(i == 1);
+			XFS_WANT_CORRUPTED_GOTO(i == 1, done);
 			if ((error = xfs_bmbt_update(cur, left.br_startoff,
 					left.br_startblock,
 					left.br_blockcount +
@@ -2139,7 +2147,7 @@ xfs_bmap_add_extent_hole_real(
 					left.br_startblock,
 					left.br_blockcount, &i)))
 				goto done;
-			ASSERT(i == 1);
+			XFS_WANT_CORRUPTED_GOTO(i == 1, done);
 			if ((error = xfs_bmbt_update(cur, left.br_startoff,
 					left.br_startblock,
 					left.br_blockcount +
@@ -2174,7 +2182,7 @@ xfs_bmap_add_extent_hole_real(
 					right.br_startblock,
 					right.br_blockcount, &i)))
 				goto done;
-			ASSERT(i == 1);
+			XFS_WANT_CORRUPTED_GOTO(i == 1, done);
 			if ((error = xfs_bmbt_update(cur, new->br_startoff,
 					new->br_startblock,
 					new->br_blockcount +
@@ -2208,11 +2216,11 @@ xfs_bmap_add_extent_hole_real(
 					new->br_startblock,
 					new->br_blockcount, &i)))
 				goto done;
-			ASSERT(i == 0);
+			XFS_WANT_CORRUPTED_GOTO(i == 0, done);
 			cur->bc_rec.b.br_state = new->br_state;
 			if ((error = xfs_bmbt_insert(cur, &i)))
 				goto done;
-			ASSERT(i == 1);
+			XFS_WANT_CORRUPTED_GOTO(i == 1, done);
 		}
 		/* DELTA: A new extent was added in a hole. */
 		temp = new->br_startoff;
@@ -3131,7 +3139,7 @@ xfs_bmap_del_extent(
 					got.br_startblock, got.br_blockcount,
 					&i)))
 				goto done;
-			ASSERT(i == 1);
+			XFS_WANT_CORRUPTED_GOTO(i == 1, done);
 		}
 		da_old = da_new = 0;
 	} else {
@@ -3164,7 +3172,7 @@ xfs_bmap_del_extent(
 		}
 		if ((error = xfs_bmbt_delete(cur, &i)))
 			goto done;
-		ASSERT(i == 1);
+		XFS_WANT_CORRUPTED_GOTO(i == 1, done);
 		break;
 
 	case 2:
@@ -3268,7 +3276,7 @@ xfs_bmap_del_extent(
 							got.br_startblock,
 							temp, &i)))
 						goto done;
-					ASSERT(i == 1);
+					XFS_WANT_CORRUPTED_GOTO(i == 1, done);
 					/*
 					 * Update the btree record back
 					 * to the original value.
@@ -3289,7 +3297,7 @@ xfs_bmap_del_extent(
 					error = XFS_ERROR(ENOSPC);
 					goto done;
 				}
-				ASSERT(i == 1);
+				XFS_WANT_CORRUPTED_GOTO(i == 1, done);
 			} else
 				flags |= XFS_ILOG_FEXT(whichfork);
 			XFS_IFORK_NEXT_SET(ip, whichfork,
@@ -3992,7 +4000,7 @@ xfs_bmap_add_attrfork(
 		ip->i_d.di_aformat = XFS_DINODE_FMT_EXTENTS;
 	}
 	ASSERT(ip->i_d.di_anextents == 0);
-	VN_HOLD(XFS_ITOV(ip));
+	IHOLD(ip);
 	xfs_trans_ijoin(tp, ip, XFS_ILOCK_EXCL);
 	xfs_trans_log_inode(tp, ip, XFS_ILOG_CORE);
 	switch (ip->i_d.di_format) {
@@ -5970,7 +5978,7 @@ unlock_and_return:
 	xfs_iunlock_map_shared(ip, lock);
 	xfs_iunlock(ip, XFS_IOLOCK_SHARED);
 
-	kmem_free(map, subnex * sizeof(*map));
+	kmem_free(map);
 
 	return error;
 }
@@ -6088,7 +6096,7 @@ xfs_bmap_get_bp(
 		tp = cur->bc_tp;
 		licp = &tp->t_items;
 		while (!bp && licp != NULL) {
-			if (XFS_LIC_ARE_ALL_FREE(licp)) {
+			if (xfs_lic_are_all_free(licp)) {
 				licp = licp->lic_next;
 				continue;
 			}
@@ -6098,11 +6106,11 @@ xfs_bmap_get_bp(
 				xfs_buf_log_item_t	*bip;
 				xfs_buf_t		*lbp;
 
-				if (XFS_LIC_ISFREE(licp, i)) {
+				if (xfs_lic_isfree(licp, i)) {
 					continue;
 				}
 
-				lidp = XFS_LIC_SLOT(licp, i);
+				lidp = xfs_lic_slot(licp, i);
 				lip = lidp->lid_item;
 				if (lip->li_type != XFS_LI_BUF)
 					continue;
@@ -6359,13 +6367,9 @@ xfs_bmap_count_blocks(
 	mp = ip->i_mount;
 	ifp = XFS_IFORK_PTR(ip, whichfork);
 	if ( XFS_IFORK_FORMAT(ip, whichfork) == XFS_DINODE_FMT_EXTENTS ) {
-		if (unlikely(xfs_bmap_count_leaves(ifp, 0,
+		xfs_bmap_count_leaves(ifp, 0,
 			ifp->if_bytes / (uint)sizeof(xfs_bmbt_rec_t),
-			count) < 0)) {
-			XFS_ERROR_REPORT("xfs_bmap_count_blocks(1)",
-					 XFS_ERRLEVEL_LOW, mp);
-			return XFS_ERROR(EFSCORRUPTED);
-		}
+			count);
 		return 0;
 	}
 
@@ -6446,13 +6450,7 @@ xfs_bmap_count_tree(
 		for (;;) {
 			nextbno = be64_to_cpu(block->bb_rightsib);
 			numrecs = be16_to_cpu(block->bb_numrecs);
-			if (unlikely(xfs_bmap_disk_count_leaves(0,
-					block, numrecs, count) < 0)) {
-				xfs_trans_brelse(tp, bp);
-				XFS_ERROR_REPORT("xfs_bmap_count_tree(2)",
-						 XFS_ERRLEVEL_LOW, mp);
-				return XFS_ERROR(EFSCORRUPTED);
-			}
+			xfs_bmap_disk_count_leaves(0, block, numrecs, count);
 			xfs_trans_brelse(tp, bp);
 			if (nextbno == NULLFSBLOCK)
 				break;
@@ -6470,7 +6468,7 @@ xfs_bmap_count_tree(
 /*
  * Count leaf blocks given a range of extent records.
  */
-STATIC int
+STATIC void
 xfs_bmap_count_leaves(
 	xfs_ifork_t		*ifp,
 	xfs_extnum_t		idx,
@@ -6483,14 +6481,13 @@ xfs_bmap_count_leaves(
 		xfs_bmbt_rec_host_t *frp = xfs_iext_get_ext(ifp, idx + b);
 		*count += xfs_bmbt_get_blockcount(frp);
 	}
-	return 0;
 }
 
 /*
  * Count leaf blocks given a range of extent records originally
  * in btree format.
  */
-STATIC int
+STATIC void
 xfs_bmap_disk_count_leaves(
 	xfs_extnum_t		idx,
 	xfs_bmbt_block_t	*block,
@@ -6504,5 +6501,4 @@ xfs_bmap_disk_count_leaves(
 		frp = XFS_BTREE_REC_ADDR(xfs_bmbt, block, idx + b);
 		*count += xfs_bmbt_disk_get_blockcount(frp);
 	}
-	return 0;
 }
diff --git a/fs/xfs/xfs_bmap.h b/fs/xfs/xfs_bmap.h
index 6ff70cda451c..9f3e3a836d15 100644
--- a/fs/xfs/xfs_bmap.h
+++ b/fs/xfs/xfs_bmap.h
@@ -54,12 +54,23 @@ typedef struct xfs_bmap_free_item
 
 /*
  * Header for free extent list.
+ *
+ * xbf_low is used by the allocator to activate the lowspace algorithm -
+ * when free space is running low the extent allocator may choose to
+ * allocate an extent from an AG without leaving sufficient space for
+ * a btree split when inserting the new extent.  In this case the allocator
+ * will enable the lowspace algorithm which is supposed to allow further
+ * allocations (such as btree splits and newroots) to allocate from
+ * sequential AGs.  In order to avoid locking AGs out of order the lowspace
+ * algorithm will start searching for free space from AG 0.  If the correct
+ * transaction reservations have been made then this algorithm will eventually
+ * find all the space it needs.
  */
 typedef	struct xfs_bmap_free
 {
 	xfs_bmap_free_item_t	*xbf_first;	/* list of to-be-free extents */
 	int			xbf_count;	/* count of items on list */
-	int			xbf_low;	/* kludge: alloc in low mode */
+	int			xbf_low;	/* alloc in low mode */
 } xfs_bmap_free_t;
 
 #define	XFS_BMAP_MAX_NMAP	4
diff --git a/fs/xfs/xfs_bmap_btree.c b/fs/xfs/xfs_bmap_btree.c
index 4f0e849d973e..23efad29a5cd 100644
--- a/fs/xfs/xfs_bmap_btree.c
+++ b/fs/xfs/xfs_bmap_btree.c
@@ -1493,12 +1493,27 @@ xfs_bmbt_split(
 	left = XFS_BUF_TO_BMBT_BLOCK(lbp);
 	args.fsbno = cur->bc_private.b.firstblock;
 	args.firstblock = args.fsbno;
+	args.minleft = 0;
 	if (args.fsbno == NULLFSBLOCK) {
 		args.fsbno = lbno;
 		args.type = XFS_ALLOCTYPE_START_BNO;
-	} else
+		/*
+		 * Make sure there is sufficient room left in the AG to
+		 * complete a full tree split for an extent insert.  If
+		 * we are converting the middle part of an extent then
+		 * we may need space for two tree splits.
+		 *
+		 * We are relying on the caller to make the correct block
+		 * reservation for this operation to succeed.  If the
+		 * reservation amount is insufficient then we may fail a
+		 * block allocation here and corrupt the filesystem.
+		 */
+		args.minleft = xfs_trans_get_block_res(args.tp);
+	} else if (cur->bc_private.b.flist->xbf_low)
+		args.type = XFS_ALLOCTYPE_START_BNO;
+	else
 		args.type = XFS_ALLOCTYPE_NEAR_BNO;
-	args.mod = args.minleft = args.alignment = args.total = args.isfl =
+	args.mod = args.alignment = args.total = args.isfl =
 		args.userdata = args.minalignslop = 0;
 	args.minlen = args.maxlen = args.prod = 1;
 	args.wasdel = cur->bc_private.b.flags & XFS_BTCUR_BPRV_WASDEL;
@@ -1510,6 +1525,21 @@ xfs_bmbt_split(
 		XFS_BMBT_TRACE_CURSOR(cur, ERROR);
 		return error;
 	}
+	if (args.fsbno == NULLFSBLOCK && args.minleft) {
+		/*
+		 * Could not find an AG with enough free space to satisfy
+		 * a full btree split.  Try again without minleft and if
+		 * successful activate the lowspace algorithm.
+		 */
+		args.fsbno = 0;
+		args.type = XFS_ALLOCTYPE_FIRST_AG;
+		args.minleft = 0;
+		if ((error = xfs_alloc_vextent(&args))) {
+			XFS_BMBT_TRACE_CURSOR(cur, ERROR);
+			return error;
+		}
+		cur->bc_private.b.flist->xbf_low = 1;
+	}
 	if (args.fsbno == NULLFSBLOCK) {
 		XFS_BMBT_TRACE_CURSOR(cur, EXIT);
 		*stat = 0;
@@ -2029,22 +2059,8 @@ xfs_bmbt_increment(
  * Insert the current record at the point referenced by cur.
  *
  * A multi-level split of the tree on insert will invalidate the original
- * cursor. It appears, however, that some callers assume that the cursor is
- * always valid. Hence if we do a multi-level split we need to revalidate the
- * cursor.
- *
- * When a split occurs, we will see a new cursor returned. Use that as a
- * trigger to determine if we need to revalidate the original cursor. If we get
- * a split, then use the original irec to lookup up the path of the record we
- * just inserted.
- *
- * Note that the fact that the btree root is in the inode means that we can
- * have the level of the tree change without a "split" occurring at the root
- * level. What happens is that the root is migrated to an allocated block and
- * the inode root is pointed to it. This means a single split can change the
- * level of the tree (level 2 -> level 3) and invalidate the old cursor. Hence
- * the level change should be accounted as a split so as to correctly trigger a
- * revalidation of the old cursor.
+ * cursor.  All callers of this function should assume that the cursor is
+ * no longer valid and revalidate it.
  */
 int					/* error */
 xfs_bmbt_insert(
@@ -2057,14 +2073,11 @@ xfs_bmbt_insert(
 	xfs_fsblock_t	nbno;
 	xfs_btree_cur_t	*ncur;
 	xfs_bmbt_rec_t	nrec;
-	xfs_bmbt_irec_t	oirec;		/* original irec */
 	xfs_btree_cur_t	*pcur;
-	int		splits = 0;
 
 	XFS_BMBT_TRACE_CURSOR(cur, ENTRY);
 	level = 0;
 	nbno = NULLFSBLOCK;
-	oirec = cur->bc_rec.b;
 	xfs_bmbt_disk_set_all(&nrec, &cur->bc_rec.b);
 	ncur = NULL;
 	pcur = cur;
@@ -2073,13 +2086,11 @@ xfs_bmbt_insert(
 				&i))) {
 			if (pcur != cur)
 				xfs_btree_del_cursor(pcur, XFS_BTREE_ERROR);
-			goto error0;
+			XFS_BMBT_TRACE_CURSOR(cur, ERROR);
+			return error;
 		}
 		XFS_WANT_CORRUPTED_GOTO(i == 1, error0);
 		if (pcur != cur && (ncur || nbno == NULLFSBLOCK)) {
-			/* allocating a new root is effectively a split */
-			if (cur->bc_nlevels != pcur->bc_nlevels)
-				splits++;
 			cur->bc_nlevels = pcur->bc_nlevels;
 			cur->bc_private.b.allocated +=
 				pcur->bc_private.b.allocated;
@@ -2093,21 +2104,10 @@ xfs_bmbt_insert(
 			xfs_btree_del_cursor(pcur, XFS_BTREE_NOERROR);
 		}
 		if (ncur) {
-			splits++;
 			pcur = ncur;
 			ncur = NULL;
 		}
 	} while (nbno != NULLFSBLOCK);
-
-	if (splits > 1) {
-		/* revalidate the old cursor as we had a multi-level split */
-		error = xfs_bmbt_lookup_eq(cur, oirec.br_startoff,
-				oirec.br_startblock, oirec.br_blockcount, &i);
-		if (error)
-			goto error0;
-		ASSERT(i == 1);
-	}
-
 	XFS_BMBT_TRACE_CURSOR(cur, EXIT);
 	*stat = i;
 	return 0;
@@ -2254,7 +2254,9 @@ xfs_bmbt_newroot(
 #endif
 		args.fsbno = be64_to_cpu(*pp);
 		args.type = XFS_ALLOCTYPE_START_BNO;
-	} else
+	} else if (cur->bc_private.b.flist->xbf_low)
+		args.type = XFS_ALLOCTYPE_START_BNO;
+	else
 		args.type = XFS_ALLOCTYPE_NEAR_BNO;
 	if ((error = xfs_alloc_vextent(&args))) {
 		XFS_BMBT_TRACE_CURSOR(cur, ERROR);
diff --git a/fs/xfs/xfs_btree.c b/fs/xfs/xfs_btree.c
index aeb87ca69fcc..cc593a84c345 100644
--- a/fs/xfs/xfs_btree.c
+++ b/fs/xfs/xfs_btree.c
@@ -46,38 +46,11 @@ kmem_zone_t	*xfs_btree_cur_zone;
 /*
  * Btree magic numbers.
  */
-const __uint32_t xfs_magics[XFS_BTNUM_MAX] =
-{
+const __uint32_t xfs_magics[XFS_BTNUM_MAX] = {
 	XFS_ABTB_MAGIC, XFS_ABTC_MAGIC, XFS_BMAP_MAGIC, XFS_IBT_MAGIC
 };
 
 /*
- * Prototypes for internal routines.
- */
-
-/*
- * Checking routine: return maxrecs for the block.
- */
-STATIC int				/* number of records fitting in block */
-xfs_btree_maxrecs(
-	xfs_btree_cur_t		*cur,	/* btree cursor */
-	xfs_btree_block_t	*block);/* generic btree block pointer */
-
-/*
- * Internal routines.
- */
-
-/*
- * Retrieve the block pointer from the cursor at the given level.
- * This may be a bmap btree root or from a buffer.
- */
-STATIC xfs_btree_block_t *			/* generic btree block pointer */
-xfs_btree_get_block(
-	xfs_btree_cur_t		*cur,	/* btree cursor */
-	int			level,	/* level in btree */
-	struct xfs_buf		**bpp);	/* buffer containing the block */
-
-/*
  * Checking routine: return maxrecs for the block.
  */
 STATIC int				/* number of records fitting in block */
@@ -457,35 +430,6 @@ xfs_btree_dup_cursor(
 }
 
 /*
- * Change the cursor to point to the first record at the given level.
- * Other levels are unaffected.
- */
-int					/* success=1, failure=0 */
-xfs_btree_firstrec(
-	xfs_btree_cur_t		*cur,	/* btree cursor */
-	int			level)	/* level to change */
-{
-	xfs_btree_block_t	*block;	/* generic btree block pointer */
-	xfs_buf_t		*bp;	/* buffer containing block */
-
-	/*
-	 * Get the block pointer for this level.
-	 */
-	block = xfs_btree_get_block(cur, level, &bp);
-	xfs_btree_check_block(cur, block, level, bp);
-	/*
-	 * It's empty, there is no such record.
-	 */
-	if (!block->bb_h.bb_numrecs)
-		return 0;
-	/*
-	 * Set the ptr value to 1, that's the first record/key.
-	 */
-	cur->bc_ptrs[level] = 1;
-	return 1;
-}
-
-/*
  * Retrieve the block pointer from the cursor at the given level.
  * This may be a bmap btree root or from a buffer.
  */
@@ -626,6 +570,13 @@ xfs_btree_init_cursor(
 		cur->bc_private.a.agbp = agbp;
 		cur->bc_private.a.agno = agno;
 		break;
+	case XFS_BTNUM_INO:
+		/*
+		 * Inode allocation btree fields.
+		 */
+		cur->bc_private.a.agbp = agbp;
+		cur->bc_private.a.agno = agno;
+		break;
 	case XFS_BTNUM_BMAP:
 		/*
 		 * Bmap btree fields.
@@ -638,13 +589,6 @@ xfs_btree_init_cursor(
 		cur->bc_private.b.flags = 0;
 		cur->bc_private.b.whichfork = whichfork;
 		break;
-	case XFS_BTNUM_INO:
-		/*
-		 * Inode allocation btree fields.
-		 */
-		cur->bc_private.i.agbp = agbp;
-		cur->bc_private.i.agno = agno;
-		break;
 	default:
 		ASSERT(0);
 	}
@@ -671,6 +615,35 @@ xfs_btree_islastblock(
 }
 
 /*
+ * Change the cursor to point to the first record at the given level.
+ * Other levels are unaffected.
+ */
+int					/* success=1, failure=0 */
+xfs_btree_firstrec(
+	xfs_btree_cur_t		*cur,	/* btree cursor */
+	int			level)	/* level to change */
+{
+	xfs_btree_block_t	*block;	/* generic btree block pointer */
+	xfs_buf_t		*bp;	/* buffer containing block */
+
+	/*
+	 * Get the block pointer for this level.
+	 */
+	block = xfs_btree_get_block(cur, level, &bp);
+	xfs_btree_check_block(cur, block, level, bp);
+	/*
+	 * It's empty, there is no such record.
+	 */
+	if (!block->bb_h.bb_numrecs)
+		return 0;
+	/*
+	 * Set the ptr value to 1, that's the first record/key.
+	 */
+	cur->bc_ptrs[level] = 1;
+	return 1;
+}
+
+/*
  * Change the cursor to point to the last record in the current block
  * at the given level.  Other levels are unaffected.
  */
@@ -890,12 +863,12 @@ xfs_btree_readahead_core(
 	case XFS_BTNUM_INO:
 		i = XFS_BUF_TO_INOBT_BLOCK(cur->bc_bufs[lev]);
 		if ((lr & XFS_BTCUR_LEFTRA) && be32_to_cpu(i->bb_leftsib) != NULLAGBLOCK) {
-			xfs_btree_reada_bufs(cur->bc_mp, cur->bc_private.i.agno,
+			xfs_btree_reada_bufs(cur->bc_mp, cur->bc_private.a.agno,
 				be32_to_cpu(i->bb_leftsib), 1);
 			rval++;
 		}
 		if ((lr & XFS_BTCUR_RIGHTRA) && be32_to_cpu(i->bb_rightsib) != NULLAGBLOCK) {
-			xfs_btree_reada_bufs(cur->bc_mp, cur->bc_private.i.agno,
+			xfs_btree_reada_bufs(cur->bc_mp, cur->bc_private.a.agno,
 				be32_to_cpu(i->bb_rightsib), 1);
 			rval++;
 		}
diff --git a/fs/xfs/xfs_btree.h b/fs/xfs/xfs_btree.h
index 7440b78f9cec..1f528a2a3754 100644
--- a/fs/xfs/xfs_btree.h
+++ b/fs/xfs/xfs_btree.h
@@ -158,8 +158,8 @@ typedef struct xfs_btree_cur
 	__uint8_t	bc_blocklog;	/* log2(blocksize) of btree blocks */
 	xfs_btnum_t	bc_btnum;	/* identifies which btree type */
 	union {
-		struct {			/* needed for BNO, CNT */
-			struct xfs_buf	*agbp;	/* agf buffer pointer */
+		struct {			/* needed for BNO, CNT, INO */
+			struct xfs_buf	*agbp;	/* agf/agi buffer pointer */
 			xfs_agnumber_t	agno;	/* ag number */
 		} a;
 		struct {			/* needed for BMAP */
@@ -172,10 +172,6 @@ typedef struct xfs_btree_cur
 			char		flags;		/* flags */
 #define	XFS_BTCUR_BPRV_WASDEL	1			/* was delayed */
 		} b;
-		struct {			/* needed for INO */
-			struct xfs_buf	*agbp;	/* agi buffer pointer */
-			xfs_agnumber_t	agno;	/* ag number */
-		} i;
 	}		bc_private;	/* per-btree type data */
 } xfs_btree_cur_t;
 
diff --git a/fs/xfs/xfs_buf_item.c b/fs/xfs/xfs_buf_item.c
index 53a71c62025d..608c30c3f76b 100644
--- a/fs/xfs/xfs_buf_item.c
+++ b/fs/xfs/xfs_buf_item.c
@@ -737,7 +737,7 @@ xfs_buf_item_init(
 	bip->bli_format.blf_len = (ushort)BTOBB(XFS_BUF_COUNT(bp));
 	bip->bli_format.blf_map_size = map_size;
 #ifdef XFS_BLI_TRACE
-	bip->bli_trace = ktrace_alloc(XFS_BLI_TRACE_SIZE, KM_SLEEP);
+	bip->bli_trace = ktrace_alloc(XFS_BLI_TRACE_SIZE, KM_NOFS);
 #endif
 
 #ifdef XFS_TRANS_DEBUG
@@ -889,9 +889,9 @@ xfs_buf_item_relse(
 	}
 
 #ifdef XFS_TRANS_DEBUG
-	kmem_free(bip->bli_orig, XFS_BUF_COUNT(bp));
+	kmem_free(bip->bli_orig);
 	bip->bli_orig = NULL;
-	kmem_free(bip->bli_logged, XFS_BUF_COUNT(bp) / NBBY);
+	kmem_free(bip->bli_logged);
 	bip->bli_logged = NULL;
 #endif /* XFS_TRANS_DEBUG */
 
@@ -1056,7 +1056,7 @@ xfs_buf_iodone_callbacks(
 			   anyway. */
 			XFS_BUF_SET_BRELSE_FUNC(bp,xfs_buf_error_relse);
 			XFS_BUF_DONE(bp);
-			XFS_BUF_V_IODONESEMA(bp);
+			XFS_BUF_FINISH_IOWAIT(bp);
 		}
 		return;
 	}
@@ -1138,9 +1138,9 @@ xfs_buf_iodone(
 	xfs_trans_delete_ail(mp, (xfs_log_item_t *)bip);
 
 #ifdef XFS_TRANS_DEBUG
-	kmem_free(bip->bli_orig, XFS_BUF_COUNT(bp));
+	kmem_free(bip->bli_orig);
 	bip->bli_orig = NULL;
-	kmem_free(bip->bli_logged, XFS_BUF_COUNT(bp) / NBBY);
+	kmem_free(bip->bli_logged);
 	bip->bli_logged = NULL;
 #endif /* XFS_TRANS_DEBUG */
 
diff --git a/fs/xfs/xfs_clnt.h b/fs/xfs/xfs_clnt.h
index d5d1e60ee224..d2ce5dd70d87 100644
--- a/fs/xfs/xfs_clnt.h
+++ b/fs/xfs/xfs_clnt.h
@@ -78,6 +78,7 @@ struct xfs_mount_args {
 #define XFSMNT_IOSIZE		0x00002000	/* optimize for I/O size */
 #define XFSMNT_OSYNCISOSYNC	0x00004000	/* o_sync is REALLY o_sync */
 						/* (osyncisdsync is default) */
+#define XFSMNT_NOATTR2		0x00008000	/* turn off ATTR2 EA format */
 #define XFSMNT_32BITINODES	0x00200000	/* restrict inodes to 32
 						 * bits of address space */
 #define XFSMNT_GQUOTA		0x00400000	/* group quota accounting */
diff --git a/fs/xfs/xfs_da_btree.c b/fs/xfs/xfs_da_btree.c
index 021a8f7e563f..9e561a9cefca 100644
--- a/fs/xfs/xfs_da_btree.c
+++ b/fs/xfs/xfs_da_btree.c
@@ -1431,7 +1431,7 @@ xfs_da_path_shift(xfs_da_state_t *state, xfs_da_state_path_t *path,
 	}
 	if (level < 0) {
 		*result = XFS_ERROR(ENOENT);	/* we're out of our tree */
-		ASSERT(args->oknoent);
+		ASSERT(args->op_flags & XFS_DA_OP_OKNOENT);
 		return(0);
 	}
 
@@ -1530,6 +1530,28 @@ xfs_da_hashname(const uchar_t *name, int namelen)
 	}
 }
 
+enum xfs_dacmp
+xfs_da_compname(
+	struct xfs_da_args *args,
+	const char 	*name,
+	int 		len)
+{
+	return (args->namelen == len && memcmp(args->name, name, len) == 0) ?
+					XFS_CMP_EXACT : XFS_CMP_DIFFERENT;
+}
+
+static xfs_dahash_t
+xfs_default_hashname(
+	struct xfs_name	*name)
+{
+	return xfs_da_hashname(name->name, name->len);
+}
+
+const struct xfs_nameops xfs_default_nameops = {
+	.hashname	= xfs_default_hashname,
+	.compname	= xfs_da_compname
+};
+
 /*
  * Add a block to the btree ahead of the file.
  * Return the new block number to the caller.
@@ -1598,7 +1620,7 @@ xfs_da_grow_inode(xfs_da_args_t *args, xfs_dablk_t *new_blkno)
 					args->firstblock, args->total,
 					&mapp[mapi], &nmap, args->flist,
 					NULL))) {
-				kmem_free(mapp, sizeof(*mapp) * count);
+				kmem_free(mapp);
 				return error;
 			}
 			if (nmap < 1)
@@ -1620,11 +1642,11 @@ xfs_da_grow_inode(xfs_da_args_t *args, xfs_dablk_t *new_blkno)
 	    mapp[mapi - 1].br_startoff + mapp[mapi - 1].br_blockcount !=
 	    bno + count) {
 		if (mapp != &map)
-			kmem_free(mapp, sizeof(*mapp) * count);
+			kmem_free(mapp);
 		return XFS_ERROR(ENOSPC);
 	}
 	if (mapp != &map)
-		kmem_free(mapp, sizeof(*mapp) * count);
+		kmem_free(mapp);
 	*new_blkno = (xfs_dablk_t)bno;
 	return 0;
 }
@@ -2090,10 +2112,10 @@ xfs_da_do_buf(
 		}
 	}
 	if (bplist) {
-		kmem_free(bplist, sizeof(*bplist) * nmap);
+		kmem_free(bplist);
 	}
 	if (mapp != &map) {
-		kmem_free(mapp, sizeof(*mapp) * nfsb);
+		kmem_free(mapp);
 	}
 	if (bpp)
 		*bpp = rbp;
@@ -2102,11 +2124,11 @@ exit1:
 	if (bplist) {
 		for (i = 0; i < nbplist; i++)
 			xfs_trans_brelse(trans, bplist[i]);
-		kmem_free(bplist, sizeof(*bplist) * nmap);
+		kmem_free(bplist);
 	}
 exit0:
 	if (mapp != &map)
-		kmem_free(mapp, sizeof(*mapp) * nfsb);
+		kmem_free(mapp);
 	if (bpp)
 		*bpp = NULL;
 	return error;
@@ -2218,7 +2240,7 @@ xfs_da_state_free(xfs_da_state_t *state)
 
 #ifdef XFS_DABUF_DEBUG
 xfs_dabuf_t	*xfs_dabuf_global_list;
-spinlock_t	xfs_dabuf_global_lock;
+static DEFINE_SPINLOCK(xfs_dabuf_global_lock);
 #endif
 
 /*
@@ -2315,7 +2337,7 @@ xfs_da_buf_done(xfs_dabuf_t *dabuf)
 	if (dabuf->dirty)
 		xfs_da_buf_clean(dabuf);
 	if (dabuf->nbuf > 1)
-		kmem_free(dabuf->data, BBTOB(dabuf->bbcount));
+		kmem_free(dabuf->data);
 #ifdef XFS_DABUF_DEBUG
 	{
 		spin_lock(&xfs_dabuf_global_lock);
@@ -2332,7 +2354,7 @@ xfs_da_buf_done(xfs_dabuf_t *dabuf)
 	if (dabuf->nbuf == 1)
 		kmem_zone_free(xfs_dabuf_zone, dabuf);
 	else
-		kmem_free(dabuf, XFS_DA_BUF_SIZE(dabuf->nbuf));
+		kmem_free(dabuf);
 }
 
 /*
@@ -2403,7 +2425,7 @@ xfs_da_brelse(xfs_trans_t *tp, xfs_dabuf_t *dabuf)
 	for (i = 0; i < nbuf; i++)
 		xfs_trans_brelse(tp, bplist[i]);
 	if (bplist != &bp)
-		kmem_free(bplist, nbuf * sizeof(*bplist));
+		kmem_free(bplist);
 }
 
 /*
@@ -2429,7 +2451,7 @@ xfs_da_binval(xfs_trans_t *tp, xfs_dabuf_t *dabuf)
 	for (i = 0; i < nbuf; i++)
 		xfs_trans_binval(tp, bplist[i]);
 	if (bplist != &bp)
-		kmem_free(bplist, nbuf * sizeof(*bplist));
+		kmem_free(bplist);
 }
 
 /*
diff --git a/fs/xfs/xfs_da_btree.h b/fs/xfs/xfs_da_btree.h
index 7facf86f74f9..8be0b00ede9a 100644
--- a/fs/xfs/xfs_da_btree.h
+++ b/fs/xfs/xfs_da_btree.h
@@ -99,6 +99,15 @@ typedef struct xfs_da_node_entry xfs_da_node_entry_t;
  *========================================================================*/
 
 /*
+ * Search comparison results
+ */
+enum xfs_dacmp {
+	XFS_CMP_DIFFERENT,	/* names are completely different */
+	XFS_CMP_EXACT,		/* names are exactly the same */
+	XFS_CMP_CASE		/* names are same but differ in case */
+};
+
+/*
  * Structure to ease passing around component names.
  */
 typedef struct xfs_da_args {
@@ -123,13 +132,20 @@ typedef struct xfs_da_args {
 	int		index2;		/* index of 2nd attr in blk */
 	xfs_dablk_t	rmtblkno2;	/* remote attr value starting blkno */
 	int		rmtblkcnt2;	/* remote attr value block count */
-	unsigned char	justcheck;	/* T/F: check for ok with no space */
-	unsigned char	rename;		/* T/F: this is an atomic rename op */
-	unsigned char	addname;	/* T/F: this is an add operation */
-	unsigned char	oknoent;	/* T/F: ok to return ENOENT, else die */
+	int		op_flags;	/* operation flags */
+	enum xfs_dacmp	cmpresult;	/* name compare result for lookups */
 } xfs_da_args_t;
 
 /*
+ * Operation flags:
+ */
+#define XFS_DA_OP_JUSTCHECK	0x0001	/* check for ok with no space */
+#define XFS_DA_OP_RENAME	0x0002	/* this is an atomic rename op */
+#define XFS_DA_OP_ADDNAME	0x0004	/* this is an add operation */
+#define XFS_DA_OP_OKNOENT	0x0008	/* lookup/add op, ENOENT ok, else die */
+#define XFS_DA_OP_CILOOKUP	0x0010	/* lookup to return CI name if found */
+
+/*
  * Structure to describe buffer(s) for a block.
  * This is needed in the directory version 2 format case, when
  * multiple non-contiguous fsblocks might be needed to cover one
@@ -201,6 +217,14 @@ typedef struct xfs_da_state {
 		(uint)(XFS_DA_LOGOFF(BASE, ADDR)), \
 		(uint)(XFS_DA_LOGOFF(BASE, ADDR)+(SIZE)-1)
 
+/*
+ * Name ops for directory and/or attr name operations
+ */
+struct xfs_nameops {
+	xfs_dahash_t	(*hashname)(struct xfs_name *);
+	enum xfs_dacmp	(*compname)(struct xfs_da_args *, const char *, int);
+};
+
 
 #ifdef __KERNEL__
 /*========================================================================
@@ -249,6 +273,10 @@ int	xfs_da_shrink_inode(xfs_da_args_t *args, xfs_dablk_t dead_blkno,
 					  xfs_dabuf_t *dead_buf);
 
 uint xfs_da_hashname(const uchar_t *name_string, int name_length);
+enum xfs_dacmp xfs_da_compname(struct xfs_da_args *args,
+				const char *name, int len);
+
+
 xfs_da_state_t *xfs_da_state_alloc(void);
 void xfs_da_state_free(xfs_da_state_t *state);
 
diff --git a/fs/xfs/xfs_dfrag.c b/fs/xfs/xfs_dfrag.c
index 5f3647cb9885..760f4c5b5160 100644
--- a/fs/xfs/xfs_dfrag.c
+++ b/fs/xfs/xfs_dfrag.c
@@ -116,7 +116,7 @@ xfs_swapext(
  out_put_file:
 	fput(file);
  out_free_sxp:
-	kmem_free(sxp, sizeof(xfs_swapext_t));
+	kmem_free(sxp);
  out:
 	return error;
 }
@@ -128,10 +128,8 @@ xfs_swap_extents(
 	xfs_swapext_t	*sxp)
 {
 	xfs_mount_t	*mp;
-	xfs_inode_t	*ips[2];
 	xfs_trans_t	*tp;
 	xfs_bstat_t	*sbp = &sxp->sx_stat;
-	bhv_vnode_t	*vp, *tvp;
 	xfs_ifork_t	*tempifp, *ifp, *tifp;
 	int		ilf_fields, tilf_fields;
 	static uint	lock_flags = XFS_ILOCK_EXCL | XFS_IOLOCK_EXCL;
@@ -150,19 +148,8 @@ xfs_swap_extents(
 	}
 
 	sbp = &sxp->sx_stat;
-	vp = XFS_ITOV(ip);
-	tvp = XFS_ITOV(tip);
-
-	/* Lock in i_ino order */
-	if (ip->i_ino < tip->i_ino) {
-		ips[0] = ip;
-		ips[1] = tip;
-	} else {
-		ips[0] = tip;
-		ips[1] = ip;
-	}
 
-	xfs_lock_inodes(ips, 2, lock_flags);
+	xfs_lock_two_inodes(ip, tip, lock_flags);
 	locked = 1;
 
 	/* Verify that both files have the same format */
@@ -184,7 +171,7 @@ xfs_swap_extents(
 		goto error0;
 	}
 
-	if (VN_CACHED(tvp) != 0) {
+	if (VN_CACHED(VFS_I(tip)) != 0) {
 		xfs_inval_cached_trace(tip, 0, -1, 0, -1);
 		error = xfs_flushinval_pages(tip, 0, -1,
 				FI_REMAPF_LOCKED);
@@ -193,7 +180,7 @@ xfs_swap_extents(
 	}
 
 	/* Verify O_DIRECT for ftmp */
-	if (VN_CACHED(tvp) != 0) {
+	if (VN_CACHED(VFS_I(tip)) != 0) {
 		error = XFS_ERROR(EINVAL);
 		goto error0;
 	}
@@ -237,7 +224,7 @@ xfs_swap_extents(
 	 * vop_read (or write in the case of autogrow) they block on the iolock
 	 * until we have switched the extents.
 	 */
-	if (VN_MAPPED(vp)) {
+	if (VN_MAPPED(VFS_I(ip))) {
 		error = XFS_ERROR(EBUSY);
 		goto error0;
 	}
@@ -265,7 +252,7 @@ xfs_swap_extents(
 		locked = 0;
 		goto error0;
 	}
-	xfs_lock_inodes(ips, 2, XFS_ILOCK_EXCL);
+	xfs_lock_two_inodes(ip, tip, XFS_ILOCK_EXCL);
 
 	/*
 	 * Count the number of extended attribute blocks
@@ -350,15 +337,11 @@ xfs_swap_extents(
 		break;
 	}
 
-	/*
-	 * Increment vnode ref counts since xfs_trans_commit &
-	 * xfs_trans_cancel will both unlock the inodes and
-	 * decrement the associated ref counts.
-	 */
-	VN_HOLD(vp);
-	VN_HOLD(tvp);
 
+	IHOLD(ip);
 	xfs_trans_ijoin(tp, ip, lock_flags);
+
+	IHOLD(tip);
 	xfs_trans_ijoin(tp, tip, lock_flags);
 
 	xfs_trans_log_inode(tp, ip,  ilf_fields);
@@ -381,6 +364,6 @@ xfs_swap_extents(
 		xfs_iunlock(tip, lock_flags);
 	}
 	if (tempifp != NULL)
-		kmem_free(tempifp, sizeof(xfs_ifork_t));
+		kmem_free(tempifp);
 	return error;
 }
diff --git a/fs/xfs/xfs_dir2.c b/fs/xfs/xfs_dir2.c
index 7cb26529766b..80e0dc51361c 100644
--- a/fs/xfs/xfs_dir2.c
+++ b/fs/xfs/xfs_dir2.c
@@ -46,6 +46,54 @@
 
 struct xfs_name xfs_name_dotdot = {"..", 2};
 
+extern const struct xfs_nameops xfs_default_nameops;
+
+/*
+ * ASCII case-insensitive (ie. A-Z) support for directories that was
+ * used in IRIX.
+ */
+STATIC xfs_dahash_t
+xfs_ascii_ci_hashname(
+	struct xfs_name	*name)
+{
+	xfs_dahash_t	hash;
+	int		i;
+
+	for (i = 0, hash = 0; i < name->len; i++)
+		hash = tolower(name->name[i]) ^ rol32(hash, 7);
+
+	return hash;
+}
+
+STATIC enum xfs_dacmp
+xfs_ascii_ci_compname(
+	struct xfs_da_args *args,
+	const char	*name,
+	int 		len)
+{
+	enum xfs_dacmp	result;
+	int		i;
+
+	if (args->namelen != len)
+		return XFS_CMP_DIFFERENT;
+
+	result = XFS_CMP_EXACT;
+	for (i = 0; i < len; i++) {
+		if (args->name[i] == name[i])
+			continue;
+		if (tolower(args->name[i]) != tolower(name[i]))
+			return XFS_CMP_DIFFERENT;
+		result = XFS_CMP_CASE;
+	}
+
+	return result;
+}
+
+static struct xfs_nameops xfs_ascii_ci_nameops = {
+	.hashname	= xfs_ascii_ci_hashname,
+	.compname	= xfs_ascii_ci_compname,
+};
+
 void
 xfs_dir_mount(
 	xfs_mount_t	*mp)
@@ -65,6 +113,10 @@ xfs_dir_mount(
 		(mp->m_dirblksize - (uint)sizeof(xfs_da_node_hdr_t)) /
 		(uint)sizeof(xfs_da_node_entry_t);
 	mp->m_dir_magicpct = (mp->m_dirblksize * 37) / 100;
+	if (xfs_sb_version_hasasciici(&mp->m_sb))
+		mp->m_dirnameops = &xfs_ascii_ci_nameops;
+	else
+		mp->m_dirnameops = &xfs_default_nameops;
 }
 
 /*
@@ -162,9 +214,10 @@ xfs_dir_createname(
 		return rval;
 	XFS_STATS_INC(xs_dir_create);
 
+	memset(&args, 0, sizeof(xfs_da_args_t));
 	args.name = name->name;
 	args.namelen = name->len;
-	args.hashval = xfs_da_hashname(name->name, name->len);
+	args.hashval = dp->i_mount->m_dirnameops->hashname(name);
 	args.inumber = inum;
 	args.dp = dp;
 	args.firstblock = first;
@@ -172,8 +225,7 @@ xfs_dir_createname(
 	args.total = total;
 	args.whichfork = XFS_DATA_FORK;
 	args.trans = tp;
-	args.justcheck = 0;
-	args.addname = args.oknoent = 1;
+	args.op_flags = XFS_DA_OP_ADDNAME | XFS_DA_OP_OKNOENT;
 
 	if (dp->i_d.di_format == XFS_DINODE_FMT_LOCAL)
 		rval = xfs_dir2_sf_addname(&args);
@@ -191,14 +243,43 @@ xfs_dir_createname(
 }
 
 /*
+ * If doing a CI lookup and case-insensitive match, dup actual name into
+ * args.value. Return EEXIST for success (ie. name found) or an error.
+ */
+int
+xfs_dir_cilookup_result(
+	struct xfs_da_args *args,
+	const char	*name,
+	int		len)
+{
+	if (args->cmpresult == XFS_CMP_DIFFERENT)
+		return ENOENT;
+	if (args->cmpresult != XFS_CMP_CASE ||
+					!(args->op_flags & XFS_DA_OP_CILOOKUP))
+		return EEXIST;
+
+	args->value = kmem_alloc(len, KM_MAYFAIL);
+	if (!args->value)
+		return ENOMEM;
+
+	memcpy(args->value, name, len);
+	args->valuelen = len;
+	return EEXIST;
+}
+
+/*
  * Lookup a name in a directory, give back the inode number.
+ * If ci_name is not NULL, returns the actual name in ci_name if it differs
+ * to name, or ci_name->name is set to NULL for an exact match.
  */
+
 int
 xfs_dir_lookup(
 	xfs_trans_t	*tp,
 	xfs_inode_t	*dp,
 	struct xfs_name	*name,
-	xfs_ino_t	*inum)		/* out: inode number */
+	xfs_ino_t	*inum,		/* out: inode number */
+	struct xfs_name *ci_name)	/* out: actual name if CI match */
 {
 	xfs_da_args_t	args;
 	int		rval;
@@ -206,15 +287,17 @@ xfs_dir_lookup(
 
 	ASSERT((dp->i_d.di_mode & S_IFMT) == S_IFDIR);
 	XFS_STATS_INC(xs_dir_lookup);
-	memset(&args, 0, sizeof(xfs_da_args_t));
 
+	memset(&args, 0, sizeof(xfs_da_args_t));
 	args.name = name->name;
 	args.namelen = name->len;
-	args.hashval = xfs_da_hashname(name->name, name->len);
+	args.hashval = dp->i_mount->m_dirnameops->hashname(name);
 	args.dp = dp;
 	args.whichfork = XFS_DATA_FORK;
 	args.trans = tp;
-	args.oknoent = 1;
+	args.op_flags = XFS_DA_OP_OKNOENT;
+	if (ci_name)
+		args.op_flags |= XFS_DA_OP_CILOOKUP;
 
 	if (dp->i_d.di_format == XFS_DINODE_FMT_LOCAL)
 		rval = xfs_dir2_sf_lookup(&args);
@@ -230,8 +313,13 @@ xfs_dir_lookup(
 		rval = xfs_dir2_node_lookup(&args);
 	if (rval == EEXIST)
 		rval = 0;
-	if (rval == 0)
+	if (!rval) {
 		*inum = args.inumber;
+		if (ci_name) {
+			ci_name->name = args.value;
+			ci_name->len = args.valuelen;
+		}
+	}
 	return rval;
 }
 
@@ -255,9 +343,10 @@ xfs_dir_removename(
 	ASSERT((dp->i_d.di_mode & S_IFMT) == S_IFDIR);
 	XFS_STATS_INC(xs_dir_remove);
 
+	memset(&args, 0, sizeof(xfs_da_args_t));
 	args.name = name->name;
 	args.namelen = name->len;
-	args.hashval = xfs_da_hashname(name->name, name->len);
+	args.hashval = dp->i_mount->m_dirnameops->hashname(name);
 	args.inumber = ino;
 	args.dp = dp;
 	args.firstblock = first;
@@ -265,7 +354,6 @@ xfs_dir_removename(
 	args.total = total;
 	args.whichfork = XFS_DATA_FORK;
 	args.trans = tp;
-	args.justcheck = args.addname = args.oknoent = 0;
 
 	if (dp->i_d.di_format == XFS_DINODE_FMT_LOCAL)
 		rval = xfs_dir2_sf_removename(&args);
@@ -338,9 +426,10 @@ xfs_dir_replace(
 	if ((rval = xfs_dir_ino_validate(tp->t_mountp, inum)))
 		return rval;
 
+	memset(&args, 0, sizeof(xfs_da_args_t));
 	args.name = name->name;
 	args.namelen = name->len;
-	args.hashval = xfs_da_hashname(name->name, name->len);
+	args.hashval = dp->i_mount->m_dirnameops->hashname(name);
 	args.inumber = inum;
 	args.dp = dp;
 	args.firstblock = first;
@@ -348,7 +437,6 @@ xfs_dir_replace(
 	args.total = total;
 	args.whichfork = XFS_DATA_FORK;
 	args.trans = tp;
-	args.justcheck = args.addname = args.oknoent = 0;
 
 	if (dp->i_d.di_format == XFS_DINODE_FMT_LOCAL)
 		rval = xfs_dir2_sf_replace(&args);
@@ -384,15 +472,16 @@ xfs_dir_canenter(
 		return 0;
 
 	ASSERT((dp->i_d.di_mode & S_IFMT) == S_IFDIR);
-	memset(&args, 0, sizeof(xfs_da_args_t));
 
+	memset(&args, 0, sizeof(xfs_da_args_t));
 	args.name = name->name;
 	args.namelen = name->len;
-	args.hashval = xfs_da_hashname(name->name, name->len);
+	args.hashval = dp->i_mount->m_dirnameops->hashname(name);
 	args.dp = dp;
 	args.whichfork = XFS_DATA_FORK;
 	args.trans = tp;
-	args.justcheck = args.addname = args.oknoent = 1;
+	args.op_flags = XFS_DA_OP_JUSTCHECK | XFS_DA_OP_ADDNAME |
+							XFS_DA_OP_OKNOENT;
 
 	if (dp->i_d.di_format == XFS_DINODE_FMT_LOCAL)
 		rval = xfs_dir2_sf_addname(&args);
@@ -493,7 +582,7 @@ xfs_dir2_grow_inode(
 					args->firstblock, args->total,
 					&mapp[mapi], &nmap, args->flist,
 					NULL))) {
-				kmem_free(mapp, sizeof(*mapp) * count);
+				kmem_free(mapp);
 				return error;
 			}
 			if (nmap < 1)
@@ -525,14 +614,14 @@ xfs_dir2_grow_inode(
 	    mapp[mapi - 1].br_startoff + mapp[mapi - 1].br_blockcount !=
 	    bno + count) {
 		if (mapp != &map)
-			kmem_free(mapp, sizeof(*mapp) * count);
+			kmem_free(mapp);
 		return XFS_ERROR(ENOSPC);
 	}
 	/*
 	 * Done with the temporary mapping table.
 	 */
 	if (mapp != &map)
-		kmem_free(mapp, sizeof(*mapp) * count);
+		kmem_free(mapp);
 	*dbp = xfs_dir2_da_to_db(mp, (xfs_dablk_t)bno);
 	/*
 	 * Update file's size if this is the data space and it grew.
diff --git a/fs/xfs/xfs_dir2.h b/fs/xfs/xfs_dir2.h
index 6392f939029f..1d9ef96f33aa 100644
--- a/fs/xfs/xfs_dir2.h
+++ b/fs/xfs/xfs_dir2.h
@@ -74,7 +74,8 @@ extern int xfs_dir_createname(struct xfs_trans *tp, struct xfs_inode *dp,
 				xfs_fsblock_t *first,
 				struct xfs_bmap_free *flist, xfs_extlen_t tot);
 extern int xfs_dir_lookup(struct xfs_trans *tp, struct xfs_inode *dp,
-				struct xfs_name *name, xfs_ino_t *inum);
+				struct xfs_name *name, xfs_ino_t *inum,
+				struct xfs_name *ci_name);
 extern int xfs_dir_removename(struct xfs_trans *tp, struct xfs_inode *dp,
 				struct xfs_name *name, xfs_ino_t ino,
 				xfs_fsblock_t *first,
@@ -99,4 +100,7 @@ extern int xfs_dir2_isleaf(struct xfs_trans *tp, struct xfs_inode *dp,
 extern int xfs_dir2_shrink_inode(struct xfs_da_args *args, xfs_dir2_db_t db,
 				struct xfs_dabuf *bp);
 
+extern int xfs_dir_cilookup_result(struct xfs_da_args *args, const char *name,
+				int len);
+
 #endif	/* __XFS_DIR2_H__ */
diff --git a/fs/xfs/xfs_dir2_block.c b/fs/xfs/xfs_dir2_block.c
index fb5a556725b3..e2fa0a1d8e96 100644
--- a/fs/xfs/xfs_dir2_block.c
+++ b/fs/xfs/xfs_dir2_block.c
@@ -215,7 +215,7 @@ xfs_dir2_block_addname(
 	/*
 	 * If this isn't a real add, we're done with the buffer.
 	 */
-	if (args->justcheck)
+	if (args->op_flags & XFS_DA_OP_JUSTCHECK)
 		xfs_da_brelse(tp, bp);
 	/*
 	 * If we don't have space for the new entry & leaf ...
@@ -225,7 +225,7 @@ xfs_dir2_block_addname(
 		 * Not trying to actually do anything, or don't have
 		 * a space reservation: return no-space.
 		 */
-		if (args->justcheck || args->total == 0)
+		if ((args->op_flags & XFS_DA_OP_JUSTCHECK) || args->total == 0)
 			return XFS_ERROR(ENOSPC);
 		/*
 		 * Convert to the next larger format.
@@ -240,7 +240,7 @@ xfs_dir2_block_addname(
 	/*
 	 * Just checking, and it would work, so say so.
 	 */
-	if (args->justcheck)
+	if (args->op_flags & XFS_DA_OP_JUSTCHECK)
 		return 0;
 	needlog = needscan = 0;
 	/*
@@ -610,14 +610,15 @@ xfs_dir2_block_lookup(
 	/*
 	 * Get the offset from the leaf entry, to point to the data.
 	 */
-	dep = (xfs_dir2_data_entry_t *)
-	      ((char *)block + xfs_dir2_dataptr_to_off(mp, be32_to_cpu(blp[ent].address)));
+	dep = (xfs_dir2_data_entry_t *)((char *)block +
+		xfs_dir2_dataptr_to_off(mp, be32_to_cpu(blp[ent].address)));
 	/*
-	 * Fill in inode number, release the block.
+	 * Fill in inode number, CI name if appropriate, release the block.
 	 */
 	args->inumber = be64_to_cpu(dep->inumber);
+	error = xfs_dir_cilookup_result(args, dep->name, dep->namelen);
 	xfs_da_brelse(args->trans, bp);
-	return XFS_ERROR(EEXIST);
+	return XFS_ERROR(error);
 }
 
 /*
@@ -643,6 +644,7 @@ xfs_dir2_block_lookup_int(
 	int			mid;		/* binary search current idx */
 	xfs_mount_t		*mp;		/* filesystem mount point */
 	xfs_trans_t		*tp;		/* transaction pointer */
+	enum xfs_dacmp		cmp;		/* comparison result */
 
 	dp = args->dp;
 	tp = args->trans;
@@ -673,7 +675,7 @@ xfs_dir2_block_lookup_int(
 		else
 			high = mid - 1;
 		if (low > high) {
-			ASSERT(args->oknoent);
+			ASSERT(args->op_flags & XFS_DA_OP_OKNOENT);
 			xfs_da_brelse(tp, bp);
 			return XFS_ERROR(ENOENT);
 		}
@@ -697,20 +699,31 @@ xfs_dir2_block_lookup_int(
 		dep = (xfs_dir2_data_entry_t *)
 			((char *)block + xfs_dir2_dataptr_to_off(mp, addr));
 		/*
-		 * Compare, if it's right give back buffer & entry number.
+		 * Compare name and if it's an exact match, return the index
+		 * and buffer. If it's the first case-insensitive match, store
+		 * the index and buffer and continue looking for an exact match.
 		 */
-		if (dep->namelen == args->namelen &&
-		    dep->name[0] == args->name[0] &&
-		    memcmp(dep->name, args->name, args->namelen) == 0) {
+		cmp = mp->m_dirnameops->compname(args, dep->name, dep->namelen);
+		if (cmp != XFS_CMP_DIFFERENT && cmp != args->cmpresult) {
+			args->cmpresult = cmp;
 			*bpp = bp;
 			*entno = mid;
-			return 0;
+			if (cmp == XFS_CMP_EXACT)
+				return 0;
 		}
-	} while (++mid < be32_to_cpu(btp->count) && be32_to_cpu(blp[mid].hashval) == hash);
+	} while (++mid < be32_to_cpu(btp->count) &&
+			be32_to_cpu(blp[mid].hashval) == hash);
+
+	ASSERT(args->op_flags & XFS_DA_OP_OKNOENT);
+	/*
+	 * Here, we can only be doing a lookup (not a rename or replace).
+	 * If a case-insensitive match was found earlier, return success.
+	 */
+	if (args->cmpresult == XFS_CMP_CASE)
+		return 0;
 	/*
 	 * No match, release the buffer and return ENOENT.
 	 */
-	ASSERT(args->oknoent);
 	xfs_da_brelse(tp, bp);
 	return XFS_ERROR(ENOENT);
 }
@@ -1033,6 +1046,7 @@ xfs_dir2_sf_to_block(
 	xfs_dir2_sf_t		*sfp;		/* shortform structure */
 	__be16			*tagp;		/* end of data entry */
 	xfs_trans_t		*tp;		/* transaction pointer */
+	struct xfs_name		name;
 
 	xfs_dir2_trace_args("sf_to_block", args);
 	dp = args->dp;
@@ -1071,7 +1085,7 @@ xfs_dir2_sf_to_block(
 	 */
 	error = xfs_dir2_grow_inode(args, XFS_DIR2_DATA_SPACE, &blkno);
 	if (error) {
-		kmem_free(buf, buf_len);
+		kmem_free(buf);
 		return error;
 	}
 	/*
@@ -1079,7 +1093,7 @@ xfs_dir2_sf_to_block(
 	 */
 	error = xfs_dir2_data_init(args, blkno, &bp);
 	if (error) {
-		kmem_free(buf, buf_len);
+		kmem_free(buf);
 		return error;
 	}
 	block = bp->data;
@@ -1187,8 +1201,10 @@ xfs_dir2_sf_to_block(
 		tagp = xfs_dir2_data_entry_tag_p(dep);
 		*tagp = cpu_to_be16((char *)dep - (char *)block);
 		xfs_dir2_data_log_entry(tp, bp, dep);
-		blp[2 + i].hashval = cpu_to_be32(xfs_da_hashname(
-					(char *)sfep->name, sfep->namelen));
+		name.name = sfep->name;
+		name.len = sfep->namelen;
+		blp[2 + i].hashval = cpu_to_be32(mp->m_dirnameops->
+							hashname(&name));
 		blp[2 + i].address = cpu_to_be32(xfs_dir2_byte_to_dataptr(mp,
 						 (char *)dep - (char *)block));
 		offset = (int)((char *)(tagp + 1) - (char *)block);
@@ -1198,7 +1214,7 @@ xfs_dir2_sf_to_block(
 			sfep = xfs_dir2_sf_nextentry(sfp, sfep);
 	}
 	/* Done with the temporary buffer */
-	kmem_free(buf, buf_len);
+	kmem_free(buf);
 	/*
 	 * Sort the leaf entries by hash value.
 	 */
diff --git a/fs/xfs/xfs_dir2_data.c b/fs/xfs/xfs_dir2_data.c
index fb8c9e08b23d..498f8d694330 100644
--- a/fs/xfs/xfs_dir2_data.c
+++ b/fs/xfs/xfs_dir2_data.c
@@ -65,6 +65,7 @@ xfs_dir2_data_check(
 	xfs_mount_t		*mp;		/* filesystem mount point */
 	char			*p;		/* current data position */
 	int			stale;		/* count of stale leaves */
+	struct xfs_name		name;
 
 	mp = dp->i_mount;
 	d = bp->data;
@@ -140,7 +141,9 @@ xfs_dir2_data_check(
 			addr = xfs_dir2_db_off_to_dataptr(mp, mp->m_dirdatablk,
 				(xfs_dir2_data_aoff_t)
 				((char *)dep - (char *)d));
-			hash = xfs_da_hashname((char *)dep->name, dep->namelen);
+			name.name = dep->name;
+			name.len = dep->namelen;
+			hash = mp->m_dirnameops->hashname(&name);
 			for (i = 0; i < be32_to_cpu(btp->count); i++) {
 				if (be32_to_cpu(lep[i].address) == addr &&
 				    be32_to_cpu(lep[i].hashval) == hash)
diff --git a/fs/xfs/xfs_dir2_leaf.c b/fs/xfs/xfs_dir2_leaf.c
index bc52b803d79b..93535992cb60 100644
--- a/fs/xfs/xfs_dir2_leaf.c
+++ b/fs/xfs/xfs_dir2_leaf.c
@@ -263,20 +263,21 @@ xfs_dir2_leaf_addname(
 	 * If we don't have enough free bytes but we can make enough
 	 * by compacting out stale entries, we'll do that.
 	 */
-	if ((char *)bestsp - (char *)&leaf->ents[be16_to_cpu(leaf->hdr.count)] < needbytes &&
-	    be16_to_cpu(leaf->hdr.stale) > 1) {
+	if ((char *)bestsp - (char *)&leaf->ents[be16_to_cpu(leaf->hdr.count)] <
+				needbytes && be16_to_cpu(leaf->hdr.stale) > 1) {
 		compact = 1;
 	}
 	/*
 	 * Otherwise if we don't have enough free bytes we need to
 	 * convert to node form.
 	 */
-	else if ((char *)bestsp - (char *)&leaf->ents[be16_to_cpu(leaf->hdr.count)] <
-		 needbytes) {
+	else if ((char *)bestsp - (char *)&leaf->ents[be16_to_cpu(
+						leaf->hdr.count)] < needbytes) {
 		/*
 		 * Just checking or no space reservation, give up.
 		 */
-		if (args->justcheck || args->total == 0) {
+		if ((args->op_flags & XFS_DA_OP_JUSTCHECK) ||
+							args->total == 0) {
 			xfs_da_brelse(tp, lbp);
 			return XFS_ERROR(ENOSPC);
 		}
@@ -301,7 +302,7 @@ xfs_dir2_leaf_addname(
 	 * If just checking, then it will fit unless we needed to allocate
 	 * a new data block.
 	 */
-	if (args->justcheck) {
+	if (args->op_flags & XFS_DA_OP_JUSTCHECK) {
 		xfs_da_brelse(tp, lbp);
 		return use_block == -1 ? XFS_ERROR(ENOSPC) : 0;
 	}
@@ -1110,7 +1111,7 @@ xfs_dir2_leaf_getdents(
 		*offset = XFS_DIR2_MAX_DATAPTR;
 	else
 		*offset = xfs_dir2_byte_to_dataptr(mp, curoff);
-	kmem_free(map, map_size * sizeof(*map));
+	kmem_free(map);
 	if (bp)
 		xfs_da_brelse(NULL, bp);
 	return error;
@@ -1298,12 +1299,13 @@ xfs_dir2_leaf_lookup(
 	      ((char *)dbp->data +
 	       xfs_dir2_dataptr_to_off(dp->i_mount, be32_to_cpu(lep->address)));
 	/*
-	 * Return the found inode number.
+	 * Return the found inode number & CI name if appropriate
 	 */
 	args->inumber = be64_to_cpu(dep->inumber);
+	error = xfs_dir_cilookup_result(args, dep->name, dep->namelen);
 	xfs_da_brelse(tp, dbp);
 	xfs_da_brelse(tp, lbp);
-	return XFS_ERROR(EEXIST);
+	return XFS_ERROR(error);
 }
 
 /*
@@ -1319,8 +1321,8 @@ xfs_dir2_leaf_lookup_int(
 	int			*indexp,	/* out: index in leaf block */
 	xfs_dabuf_t		**dbpp)		/* out: data buffer */
 {
-	xfs_dir2_db_t		curdb;		/* current data block number */
-	xfs_dabuf_t		*dbp;		/* data buffer */
+	xfs_dir2_db_t		curdb = -1;	/* current data block number */
+	xfs_dabuf_t		*dbp = NULL;	/* data buffer */
 	xfs_dir2_data_entry_t	*dep;		/* data entry */
 	xfs_inode_t		*dp;		/* incore directory inode */
 	int			error;		/* error return code */
@@ -1331,6 +1333,8 @@ xfs_dir2_leaf_lookup_int(
 	xfs_mount_t		*mp;		/* filesystem mount point */
 	xfs_dir2_db_t		newdb;		/* new data block number */
 	xfs_trans_t		*tp;		/* transaction pointer */
+	xfs_dir2_db_t		cidb = -1;	/* case match data block no. */
+	enum xfs_dacmp		cmp;		/* name compare result */
 
 	dp = args->dp;
 	tp = args->trans;
@@ -1338,11 +1342,10 @@ xfs_dir2_leaf_lookup_int(
 	/*
 	 * Read the leaf block into the buffer.
 	 */
-	if ((error =
-	    xfs_da_read_buf(tp, dp, mp->m_dirleafblk, -1, &lbp,
-		    XFS_DATA_FORK))) {
+	error = xfs_da_read_buf(tp, dp, mp->m_dirleafblk, -1, &lbp,
+							XFS_DATA_FORK);
+	if (error)
 		return error;
-	}
 	*lbpp = lbp;
 	leaf = lbp->data;
 	xfs_dir2_leaf_check(dp, lbp);
@@ -1354,9 +1357,9 @@ xfs_dir2_leaf_lookup_int(
 	 * Loop over all the entries with the right hash value
 	 * looking to match the name.
 	 */
-	for (lep = &leaf->ents[index], dbp = NULL, curdb = -1;
-	     index < be16_to_cpu(leaf->hdr.count) && be32_to_cpu(lep->hashval) == args->hashval;
-	     lep++, index++) {
+	for (lep = &leaf->ents[index]; index < be16_to_cpu(leaf->hdr.count) &&
+				be32_to_cpu(lep->hashval) == args->hashval;
+				lep++, index++) {
 		/*
 		 * Skip over stale leaf entries.
 		 */
@@ -1373,10 +1376,10 @@ xfs_dir2_leaf_lookup_int(
 		if (newdb != curdb) {
 			if (dbp)
 				xfs_da_brelse(tp, dbp);
-			if ((error =
-			    xfs_da_read_buf(tp, dp,
-				    xfs_dir2_db_to_da(mp, newdb), -1, &dbp,
-				    XFS_DATA_FORK))) {
+			error = xfs_da_read_buf(tp, dp,
+						xfs_dir2_db_to_da(mp, newdb),
+						-1, &dbp, XFS_DATA_FORK);
+			if (error) {
 				xfs_da_brelse(tp, lbp);
 				return error;
 			}
@@ -1386,24 +1389,50 @@ xfs_dir2_leaf_lookup_int(
 		/*
 		 * Point to the data entry.
 		 */
-		dep = (xfs_dir2_data_entry_t *)
-		      ((char *)dbp->data +
-		       xfs_dir2_dataptr_to_off(mp, be32_to_cpu(lep->address)));
+		dep = (xfs_dir2_data_entry_t *)((char *)dbp->data +
+			xfs_dir2_dataptr_to_off(mp, be32_to_cpu(lep->address)));
 		/*
-		 * If it matches then return it.
+		 * Compare name and if it's an exact match, return the index
+		 * and buffer. If it's the first case-insensitive match, store
+		 * the index and buffer and continue looking for an exact match.
 		 */
-		if (dep->namelen == args->namelen &&
-		    dep->name[0] == args->name[0] &&
-		    memcmp(dep->name, args->name, args->namelen) == 0) {
-			*dbpp = dbp;
+		cmp = mp->m_dirnameops->compname(args, dep->name, dep->namelen);
+		if (cmp != XFS_CMP_DIFFERENT && cmp != args->cmpresult) {
+			args->cmpresult = cmp;
 			*indexp = index;
-			return 0;
+			/* case exact match: return the current buffer. */
+			if (cmp == XFS_CMP_EXACT) {
+				*dbpp = dbp;
+				return 0;
+			}
+			cidb = curdb;
 		}
 	}
+	ASSERT(args->op_flags & XFS_DA_OP_OKNOENT);
+	/*
+	 * Here, we can only be doing a lookup (not a rename or remove).
+	 * If a case-insensitive match was found earlier, re-read the
+	 * appropriate data block if required and return it.
+	 */
+	if (args->cmpresult == XFS_CMP_CASE) {
+		ASSERT(cidb != -1);
+		if (cidb != curdb) {
+			xfs_da_brelse(tp, dbp);
+			error = xfs_da_read_buf(tp, dp,
+						xfs_dir2_db_to_da(mp, cidb),
+						-1, &dbp, XFS_DATA_FORK);
+			if (error) {
+				xfs_da_brelse(tp, lbp);
+				return error;
+			}
+		}
+		*dbpp = dbp;
+		return 0;
+	}
 	/*
 	 * No match found, return ENOENT.
 	 */
-	ASSERT(args->oknoent);
+	ASSERT(cidb == -1);
 	if (dbp)
 		xfs_da_brelse(tp, dbp);
 	xfs_da_brelse(tp, lbp);
diff --git a/fs/xfs/xfs_dir2_node.c b/fs/xfs/xfs_dir2_node.c
index 8dade711f099..fa6c3a5ddbc6 100644
--- a/fs/xfs/xfs_dir2_node.c
+++ b/fs/xfs/xfs_dir2_node.c
@@ -226,7 +226,7 @@ xfs_dir2_leafn_add(
 	ASSERT(index == be16_to_cpu(leaf->hdr.count) ||
 	       be32_to_cpu(leaf->ents[index].hashval) >= args->hashval);
 
-	if (args->justcheck)
+	if (args->op_flags & XFS_DA_OP_JUSTCHECK)
 		return 0;
 
 	/*
@@ -387,28 +387,26 @@ xfs_dir2_leafn_lasthash(
 }
 
 /*
- * Look up a leaf entry in a node-format leaf block.
- * If this is an addname then the extrablk in state is a freespace block,
- * otherwise it's a data block.
+ * Look up a leaf entry for space to add a name in a node-format leaf block.
+ * The extrablk in state is a freespace block.
  */
-int
-xfs_dir2_leafn_lookup_int(
+STATIC int
+xfs_dir2_leafn_lookup_for_addname(
 	xfs_dabuf_t		*bp,		/* leaf buffer */
 	xfs_da_args_t		*args,		/* operation arguments */
 	int			*indexp,	/* out: leaf entry index */
 	xfs_da_state_t		*state)		/* state to fill in */
 {
-	xfs_dabuf_t		*curbp;		/* current data/free buffer */
-	xfs_dir2_db_t		curdb;		/* current data block number */
-	xfs_dir2_db_t		curfdb;		/* current free block number */
-	xfs_dir2_data_entry_t	*dep;		/* data block entry */
+	xfs_dabuf_t		*curbp = NULL;	/* current data/free buffer */
+	xfs_dir2_db_t		curdb = -1;	/* current data block number */
+	xfs_dir2_db_t		curfdb = -1;	/* current free block number */
 	xfs_inode_t		*dp;		/* incore directory inode */
 	int			error;		/* error return value */
 	int			fi;		/* free entry index */
-	xfs_dir2_free_t		*free=NULL;	/* free block structure */
+	xfs_dir2_free_t		*free = NULL;	/* free block structure */
 	int			index;		/* leaf entry index */
 	xfs_dir2_leaf_t		*leaf;		/* leaf structure */
-	int			length=0;	/* length of new data entry */
+	int			length;		/* length of new data entry */
 	xfs_dir2_leaf_entry_t	*lep;		/* leaf entry */
 	xfs_mount_t		*mp;		/* filesystem mount point */
 	xfs_dir2_db_t		newdb;		/* new data block number */
@@ -431,33 +429,20 @@ xfs_dir2_leafn_lookup_int(
 	/*
 	 * Do we have a buffer coming in?
 	 */
-	if (state->extravalid)
+	if (state->extravalid) {
+		/* If so, it's a free block buffer, get the block number. */
 		curbp = state->extrablk.bp;
-	else
-		curbp = NULL;
-	/*
-	 * For addname, it's a free block buffer, get the block number.
-	 */
-	if (args->addname) {
-		curfdb = curbp ? state->extrablk.blkno : -1;
-		curdb = -1;
-		length = xfs_dir2_data_entsize(args->namelen);
-		if ((free = (curbp ? curbp->data : NULL)))
-			ASSERT(be32_to_cpu(free->hdr.magic) == XFS_DIR2_FREE_MAGIC);
-	}
-	/*
-	 * For others, it's a data block buffer, get the block number.
-	 */
-	else {
-		curfdb = -1;
-		curdb = curbp ? state->extrablk.blkno : -1;
+		curfdb = state->extrablk.blkno;
+		free = curbp->data;
+		ASSERT(be32_to_cpu(free->hdr.magic) == XFS_DIR2_FREE_MAGIC);
 	}
+	length = xfs_dir2_data_entsize(args->namelen);
 	/*
 	 * Loop over leaf entries with the right hash value.
 	 */
-	for (lep = &leaf->ents[index];
-	     index < be16_to_cpu(leaf->hdr.count) && be32_to_cpu(lep->hashval) == args->hashval;
-	     lep++, index++) {
+	for (lep = &leaf->ents[index]; index < be16_to_cpu(leaf->hdr.count) &&
+				be32_to_cpu(lep->hashval) == args->hashval;
+				lep++, index++) {
 		/*
 		 * Skip stale leaf entries.
 		 */
@@ -471,161 +456,244 @@ xfs_dir2_leafn_lookup_int(
 		 * For addname, we're looking for a place to put the new entry.
 		 * We want to use a data block with an entry of equal
 		 * hash value to ours if there is one with room.
+		 *
+		 * If this block isn't the data block we already have
+		 * in hand, take a look at it.
 		 */
-		if (args->addname) {
+		if (newdb != curdb) {
+			curdb = newdb;
 			/*
-			 * If this block isn't the data block we already have
-			 * in hand, take a look at it.
+			 * Convert the data block to the free block
+			 * holding its freespace information.
 			 */
-			if (newdb != curdb) {
-				curdb = newdb;
-				/*
-				 * Convert the data block to the free block
-				 * holding its freespace information.
-				 */
-				newfdb = xfs_dir2_db_to_fdb(mp, newdb);
-				/*
-				 * If it's not the one we have in hand,
-				 * read it in.
-				 */
-				if (newfdb != curfdb) {
-					/*
-					 * If we had one before, drop it.
-					 */
-					if (curbp)
-						xfs_da_brelse(tp, curbp);
-					/*
-					 * Read the free block.
-					 */
-					if ((error = xfs_da_read_buf(tp, dp,
-							xfs_dir2_db_to_da(mp,
-								newfdb),
-							-1, &curbp,
-							XFS_DATA_FORK))) {
-						return error;
-					}
-					free = curbp->data;
-					ASSERT(be32_to_cpu(free->hdr.magic) ==
-					       XFS_DIR2_FREE_MAGIC);
-					ASSERT((be32_to_cpu(free->hdr.firstdb) %
-						XFS_DIR2_MAX_FREE_BESTS(mp)) ==
-					       0);
-					ASSERT(be32_to_cpu(free->hdr.firstdb) <= curdb);
-					ASSERT(curdb <
-					       be32_to_cpu(free->hdr.firstdb) +
-					       be32_to_cpu(free->hdr.nvalid));
-				}
-				/*
-				 * Get the index for our entry.
-				 */
-				fi = xfs_dir2_db_to_fdindex(mp, curdb);
-				/*
-				 * If it has room, return it.
-				 */
-				if (unlikely(be16_to_cpu(free->bests[fi]) == NULLDATAOFF)) {
-					XFS_ERROR_REPORT("xfs_dir2_leafn_lookup_int",
-							 XFS_ERRLEVEL_LOW, mp);
-					if (curfdb != newfdb)
-						xfs_da_brelse(tp, curbp);
-					return XFS_ERROR(EFSCORRUPTED);
-				}
-				curfdb = newfdb;
-				if (be16_to_cpu(free->bests[fi]) >= length) {
-					*indexp = index;
-					state->extravalid = 1;
-					state->extrablk.bp = curbp;
-					state->extrablk.blkno = curfdb;
-					state->extrablk.index = fi;
-					state->extrablk.magic =
-						XFS_DIR2_FREE_MAGIC;
-					ASSERT(args->oknoent);
-					return XFS_ERROR(ENOENT);
-				}
-			}
-		}
-		/*
-		 * Not adding a new entry, so we really want to find
-		 * the name given to us.
-		 */
-		else {
+			newfdb = xfs_dir2_db_to_fdb(mp, newdb);
 			/*
-			 * If it's a different data block, go get it.
+			 * If it's not the one we have in hand, read it in.
 			 */
-			if (newdb != curdb) {
+			if (newfdb != curfdb) {
 				/*
-				 * If we had a block before, drop it.
+				 * If we had one before, drop it.
 				 */
 				if (curbp)
 					xfs_da_brelse(tp, curbp);
 				/*
-				 * Read the data block.
+				 * Read the free block.
 				 */
-				if ((error =
-				    xfs_da_read_buf(tp, dp,
-					    xfs_dir2_db_to_da(mp, newdb), -1,
-					    &curbp, XFS_DATA_FORK))) {
+				error = xfs_da_read_buf(tp, dp,
+						xfs_dir2_db_to_da(mp, newfdb),
+						-1, &curbp, XFS_DATA_FORK);
+				if (error)
 					return error;
-				}
-				xfs_dir2_data_check(dp, curbp);
-				curdb = newdb;
+				free = curbp->data;
+				ASSERT(be32_to_cpu(free->hdr.magic) ==
+					XFS_DIR2_FREE_MAGIC);
+				ASSERT((be32_to_cpu(free->hdr.firstdb) %
+					XFS_DIR2_MAX_FREE_BESTS(mp)) == 0);
+				ASSERT(be32_to_cpu(free->hdr.firstdb) <= curdb);
+				ASSERT(curdb < be32_to_cpu(free->hdr.firstdb) +
+					be32_to_cpu(free->hdr.nvalid));
 			}
 			/*
-			 * Point to the data entry.
+			 * Get the index for our entry.
 			 */
-			dep = (xfs_dir2_data_entry_t *)
-			      ((char *)curbp->data +
-			       xfs_dir2_dataptr_to_off(mp, be32_to_cpu(lep->address)));
+			fi = xfs_dir2_db_to_fdindex(mp, curdb);
 			/*
-			 * Compare the entry, return it if it matches.
+			 * If it has room, return it.
 			 */
-			if (dep->namelen == args->namelen &&
-			    dep->name[0] == args->name[0] &&
-			    memcmp(dep->name, args->name, args->namelen) == 0) {
-				args->inumber = be64_to_cpu(dep->inumber);
-				*indexp = index;
-				state->extravalid = 1;
-				state->extrablk.bp = curbp;
-				state->extrablk.blkno = curdb;
-				state->extrablk.index =
-					(int)((char *)dep -
-					      (char *)curbp->data);
-				state->extrablk.magic = XFS_DIR2_DATA_MAGIC;
-				return XFS_ERROR(EEXIST);
+			if (unlikely(be16_to_cpu(free->bests[fi]) == NULLDATAOFF)) {
+				XFS_ERROR_REPORT("xfs_dir2_leafn_lookup_int",
+							XFS_ERRLEVEL_LOW, mp);
+				if (curfdb != newfdb)
+					xfs_da_brelse(tp, curbp);
+				return XFS_ERROR(EFSCORRUPTED);
 			}
+			curfdb = newfdb;
+			if (be16_to_cpu(free->bests[fi]) >= length)
+				goto out;
 		}
 	}
+	/* Didn't find any space */
+	fi = -1;
+out:
+	ASSERT(args->op_flags & XFS_DA_OP_OKNOENT);
+	if (curbp) {
+		/* Giving back a free block. */
+		state->extravalid = 1;
+		state->extrablk.bp = curbp;
+		state->extrablk.index = fi;
+		state->extrablk.blkno = curfdb;
+		state->extrablk.magic = XFS_DIR2_FREE_MAGIC;
+	} else {
+		state->extravalid = 0;
+	}
 	/*
-	 * Didn't find a match.
-	 * If we are holding a buffer, give it back in case our caller
-	 * finds it useful.
+	 * Return the index, that will be the insertion point.
 	 */
-	if ((state->extravalid = (curbp != NULL))) {
-		state->extrablk.bp = curbp;
-		state->extrablk.index = -1;
+	*indexp = index;
+	return XFS_ERROR(ENOENT);
+}
+
+/*
+ * Look up a leaf entry in a node-format leaf block.
+ * The extrablk in state a data block.
+ */
+STATIC int
+xfs_dir2_leafn_lookup_for_entry(
+	xfs_dabuf_t		*bp,		/* leaf buffer */
+	xfs_da_args_t		*args,		/* operation arguments */
+	int			*indexp,	/* out: leaf entry index */
+	xfs_da_state_t		*state)		/* state to fill in */
+{
+	xfs_dabuf_t		*curbp = NULL;	/* current data/free buffer */
+	xfs_dir2_db_t		curdb = -1;	/* current data block number */
+	xfs_dir2_data_entry_t	*dep;		/* data block entry */
+	xfs_inode_t		*dp;		/* incore directory inode */
+	int			error;		/* error return value */
+	int			index;		/* leaf entry index */
+	xfs_dir2_leaf_t		*leaf;		/* leaf structure */
+	xfs_dir2_leaf_entry_t	*lep;		/* leaf entry */
+	xfs_mount_t		*mp;		/* filesystem mount point */
+	xfs_dir2_db_t		newdb;		/* new data block number */
+	xfs_trans_t		*tp;		/* transaction pointer */
+	enum xfs_dacmp		cmp;		/* comparison result */
+
+	dp = args->dp;
+	tp = args->trans;
+	mp = dp->i_mount;
+	leaf = bp->data;
+	ASSERT(be16_to_cpu(leaf->hdr.info.magic) == XFS_DIR2_LEAFN_MAGIC);
+#ifdef __KERNEL__
+	ASSERT(be16_to_cpu(leaf->hdr.count) > 0);
+#endif
+	xfs_dir2_leafn_check(dp, bp);
+	/*
+	 * Look up the hash value in the leaf entries.
+	 */
+	index = xfs_dir2_leaf_search_hash(args, bp);
+	/*
+	 * Do we have a buffer coming in?
+	 */
+	if (state->extravalid) {
+		curbp = state->extrablk.bp;
+		curdb = state->extrablk.blkno;
+	}
+	/*
+	 * Loop over leaf entries with the right hash value.
+	 */
+	for (lep = &leaf->ents[index]; index < be16_to_cpu(leaf->hdr.count) &&
+				be32_to_cpu(lep->hashval) == args->hashval;
+				lep++, index++) {
 		/*
-		 * For addname, giving back a free block.
+		 * Skip stale leaf entries.
 		 */
-		if (args->addname) {
-			state->extrablk.blkno = curfdb;
-			state->extrablk.magic = XFS_DIR2_FREE_MAGIC;
+		if (be32_to_cpu(lep->address) == XFS_DIR2_NULL_DATAPTR)
+			continue;
+		/*
+		 * Pull the data block number from the entry.
+		 */
+		newdb = xfs_dir2_dataptr_to_db(mp, be32_to_cpu(lep->address));
+		/*
+		 * Not adding a new entry, so we really want to find
+		 * the name given to us.
+		 *
+		 * If it's a different data block, go get it.
+		 */
+		if (newdb != curdb) {
+			/*
+			 * If we had a block before that we aren't saving
+			 * for a CI name, drop it
+			 */
+			if (curbp && (args->cmpresult == XFS_CMP_DIFFERENT ||
+						curdb != state->extrablk.blkno))
+				xfs_da_brelse(tp, curbp);
+			/*
+			 * If needing the block that is saved with a CI match,
+			 * use it otherwise read in the new data block.
+			 */
+			if (args->cmpresult != XFS_CMP_DIFFERENT &&
+					newdb == state->extrablk.blkno) {
+				ASSERT(state->extravalid);
+				curbp = state->extrablk.bp;
+			} else {
+				error = xfs_da_read_buf(tp, dp,
+						xfs_dir2_db_to_da(mp, newdb),
+						-1, &curbp, XFS_DATA_FORK);
+				if (error)
+					return error;
+			}
+			xfs_dir2_data_check(dp, curbp);
+			curdb = newdb;
 		}
 		/*
-		 * For other callers, giving back a data block.
+		 * Point to the data entry.
 		 */
-		else {
+		dep = (xfs_dir2_data_entry_t *)((char *)curbp->data +
+			xfs_dir2_dataptr_to_off(mp, be32_to_cpu(lep->address)));
+		/*
+		 * Compare the entry and if it's an exact match, return
+		 * EEXIST immediately. If it's the first case-insensitive
+		 * match, store the block & inode number and continue looking.
+		 */
+		cmp = mp->m_dirnameops->compname(args, dep->name, dep->namelen);
+		if (cmp != XFS_CMP_DIFFERENT && cmp != args->cmpresult) {
+			/* If there is a CI match block, drop it */
+			if (args->cmpresult != XFS_CMP_DIFFERENT &&
+						curdb != state->extrablk.blkno)
+				xfs_da_brelse(tp, state->extrablk.bp);
+			args->cmpresult = cmp;
+			args->inumber = be64_to_cpu(dep->inumber);
+			*indexp = index;
+			state->extravalid = 1;
+			state->extrablk.bp = curbp;
 			state->extrablk.blkno = curdb;
+			state->extrablk.index = (int)((char *)dep -
+							(char *)curbp->data);
 			state->extrablk.magic = XFS_DIR2_DATA_MAGIC;
+			if (cmp == XFS_CMP_EXACT)
+				return XFS_ERROR(EEXIST);
 		}
 	}
-	/*
-	 * Return the final index, that will be the insertion point.
-	 */
+	ASSERT(index == be16_to_cpu(leaf->hdr.count) ||
+					(args->op_flags & XFS_DA_OP_OKNOENT));
+	if (curbp) {
+		if (args->cmpresult == XFS_CMP_DIFFERENT) {
+			/* Giving back last used data block. */
+			state->extravalid = 1;
+			state->extrablk.bp = curbp;
+			state->extrablk.index = -1;
+			state->extrablk.blkno = curdb;
+			state->extrablk.magic = XFS_DIR2_DATA_MAGIC;
+		} else {
+			/* If the curbp is not the CI match block, drop it */
+			if (state->extrablk.bp != curbp)
+				xfs_da_brelse(tp, curbp);
+		}
+	} else {
+		state->extravalid = 0;
+	}
 	*indexp = index;
-	ASSERT(index == be16_to_cpu(leaf->hdr.count) || args->oknoent);
 	return XFS_ERROR(ENOENT);
 }
 
 /*
+ * Look up a leaf entry in a node-format leaf block.
+ * If this is an addname then the extrablk in state is a freespace block,
+ * otherwise it's a data block.
+ */
+int
+xfs_dir2_leafn_lookup_int(
+	xfs_dabuf_t		*bp,		/* leaf buffer */
+	xfs_da_args_t		*args,		/* operation arguments */
+	int			*indexp,	/* out: leaf entry index */
+	xfs_da_state_t		*state)		/* state to fill in */
+{
+	if (args->op_flags & XFS_DA_OP_ADDNAME)
+		return xfs_dir2_leafn_lookup_for_addname(bp, args, indexp,
+							state);
+	return xfs_dir2_leafn_lookup_for_entry(bp, args, indexp, state);
+}
+
+/*
  * Move count leaf entries from source to destination leaf.
  * Log entries and headers.  Stale entries are preserved.
  */
@@ -823,9 +891,10 @@ xfs_dir2_leafn_rebalance(
 	 */
 	if (!state->inleaf)
 		blk2->index = blk1->index - be16_to_cpu(leaf1->hdr.count);
-	
-	/* 
-	 * Finally sanity check just to make sure we are not returning a negative index 
+
+	/*
+	 * Finally sanity check just to make sure we are not returning a
+	 * negative index
 	 */
 	if(blk2->index < 0) {
 		state->inleaf = 1;
@@ -1332,7 +1401,7 @@ xfs_dir2_node_addname(
 		/*
 		 * It worked, fix the hash values up the btree.
 		 */
-		if (!args->justcheck)
+		if (!(args->op_flags & XFS_DA_OP_JUSTCHECK))
 			xfs_da_fixhashpath(state, &state->path);
 	} else {
 		/*
@@ -1515,7 +1584,8 @@ xfs_dir2_node_addname_int(
 		/*
 		 * Not allowed to allocate, return failure.
 		 */
-		if (args->justcheck || args->total == 0) {
+		if ((args->op_flags & XFS_DA_OP_JUSTCHECK) ||
+							args->total == 0) {
 			/*
 			 * Drop the freespace buffer unless it came from our
 			 * caller.
@@ -1661,7 +1731,7 @@ xfs_dir2_node_addname_int(
 		/*
 		 * If just checking, we succeeded.
 		 */
-		if (args->justcheck) {
+		if (args->op_flags & XFS_DA_OP_JUSTCHECK) {
 			if ((fblk == NULL || fblk->bp == NULL) && fbp != NULL)
 				xfs_da_buf_done(fbp);
 			return 0;
@@ -1767,6 +1837,14 @@ xfs_dir2_node_lookup(
 	error = xfs_da_node_lookup_int(state, &rval);
 	if (error)
 		rval = error;
+	else if (rval == ENOENT && args->cmpresult == XFS_CMP_CASE) {
+		/* If a CI match, dup the actual name and return EEXIST */
+		xfs_dir2_data_entry_t	*dep;
+
+		dep = (xfs_dir2_data_entry_t *)((char *)state->extrablk.bp->
+						data + state->extrablk.index);
+		rval = xfs_dir_cilookup_result(args, dep->name, dep->namelen);
+	}
 	/*
 	 * Release the btree blocks and leaf block.
 	 */
@@ -1810,9 +1888,8 @@ xfs_dir2_node_removename(
 	 * Look up the entry we're deleting, set up the cursor.
 	 */
 	error = xfs_da_node_lookup_int(state, &rval);
-	if (error) {
+	if (error)
 		rval = error;
-	}
 	/*
 	 * Didn't find it, upper layer screwed up.
 	 */
@@ -1829,9 +1906,8 @@ xfs_dir2_node_removename(
 	 */
 	error = xfs_dir2_leafn_remove(args, blk->bp, blk->index,
 		&state->extrablk, &rval);
-	if (error) {
+	if (error)
 		return error;
-	}
 	/*
 	 * Fix the hash values up the btree.
 	 */
diff --git a/fs/xfs/xfs_dir2_sf.c b/fs/xfs/xfs_dir2_sf.c
index 919d275a1cef..b46af0013ec9 100644
--- a/fs/xfs/xfs_dir2_sf.c
+++ b/fs/xfs/xfs_dir2_sf.c
@@ -255,7 +255,7 @@ xfs_dir2_block_to_sf(
 	xfs_dir2_sf_check(args);
 out:
 	xfs_trans_log_inode(args->trans, dp, logflags);
-	kmem_free(block, mp->m_dirblksize);
+	kmem_free(block);
 	return error;
 }
 
@@ -332,7 +332,7 @@ xfs_dir2_sf_addname(
 		/*
 		 * Just checking or no space reservation, it doesn't fit.
 		 */
-		if (args->justcheck || args->total == 0)
+		if ((args->op_flags & XFS_DA_OP_JUSTCHECK) || args->total == 0)
 			return XFS_ERROR(ENOSPC);
 		/*
 		 * Convert to block form then add the name.
@@ -345,7 +345,7 @@ xfs_dir2_sf_addname(
 	/*
 	 * Just checking, it fits.
 	 */
-	if (args->justcheck)
+	if (args->op_flags & XFS_DA_OP_JUSTCHECK)
 		return 0;
 	/*
 	 * Do it the easy way - just add it at the end.
@@ -512,7 +512,7 @@ xfs_dir2_sf_addname_hard(
 		sfep = xfs_dir2_sf_nextentry(sfp, sfep);
 		memcpy(sfep, oldsfep, old_isize - nbytes);
 	}
-	kmem_free(buf, old_isize);
+	kmem_free(buf);
 	dp->i_d.di_size = new_isize;
 	xfs_dir2_sf_check(args);
 }
@@ -812,8 +812,11 @@ xfs_dir2_sf_lookup(
 {
 	xfs_inode_t		*dp;		/* incore directory inode */
 	int			i;		/* entry index */
+	int			error;
 	xfs_dir2_sf_entry_t	*sfep;		/* shortform directory entry */
 	xfs_dir2_sf_t		*sfp;		/* shortform structure */
+	enum xfs_dacmp		cmp;		/* comparison result */
+	xfs_dir2_sf_entry_t	*ci_sfep;	/* case-insens. entry */
 
 	xfs_dir2_trace_args("sf_lookup", args);
 	xfs_dir2_sf_check(args);
@@ -836,6 +839,7 @@ xfs_dir2_sf_lookup(
 	 */
 	if (args->namelen == 1 && args->name[0] == '.') {
 		args->inumber = dp->i_ino;
+		args->cmpresult = XFS_CMP_EXACT;
 		return XFS_ERROR(EEXIST);
 	}
 	/*
@@ -844,28 +848,41 @@ xfs_dir2_sf_lookup(
 	if (args->namelen == 2 &&
 	    args->name[0] == '.' && args->name[1] == '.') {
 		args->inumber = xfs_dir2_sf_get_inumber(sfp, &sfp->hdr.parent);
+		args->cmpresult = XFS_CMP_EXACT;
 		return XFS_ERROR(EEXIST);
 	}
 	/*
 	 * Loop over all the entries trying to match ours.
 	 */
-	for (i = 0, sfep = xfs_dir2_sf_firstentry(sfp);
-	     i < sfp->hdr.count;
-	     i++, sfep = xfs_dir2_sf_nextentry(sfp, sfep)) {
-		if (sfep->namelen == args->namelen &&
-		    sfep->name[0] == args->name[0] &&
-		    memcmp(args->name, sfep->name, args->namelen) == 0) {
-			args->inumber =
-				xfs_dir2_sf_get_inumber(sfp,
-					xfs_dir2_sf_inumberp(sfep));
-			return XFS_ERROR(EEXIST);
+	ci_sfep = NULL;
+	for (i = 0, sfep = xfs_dir2_sf_firstentry(sfp); i < sfp->hdr.count;
+				i++, sfep = xfs_dir2_sf_nextentry(sfp, sfep)) {
+		/*
+		 * Compare name and if it's an exact match, return the inode
+		 * number. If it's the first case-insensitive match, store the
+		 * inode number and continue looking for an exact match.
+		 */
+		cmp = dp->i_mount->m_dirnameops->compname(args, sfep->name,
+								sfep->namelen);
+		if (cmp != XFS_CMP_DIFFERENT && cmp != args->cmpresult) {
+			args->cmpresult = cmp;
+			args->inumber = xfs_dir2_sf_get_inumber(sfp,
+						xfs_dir2_sf_inumberp(sfep));
+			if (cmp == XFS_CMP_EXACT)
+				return XFS_ERROR(EEXIST);
+			ci_sfep = sfep;
 		}
 	}
+	ASSERT(args->op_flags & XFS_DA_OP_OKNOENT);
 	/*
-	 * Didn't find it.
+	 * Here, we can only be doing a lookup (not a rename or replace).
+	 * If a case-insensitive match was not found, return ENOENT.
 	 */
-	ASSERT(args->oknoent);
-	return XFS_ERROR(ENOENT);
+	if (!ci_sfep)
+		return XFS_ERROR(ENOENT);
+	/* otherwise process the CI match as required by the caller */
+	error = xfs_dir_cilookup_result(args, ci_sfep->name, ci_sfep->namelen);
+	return XFS_ERROR(error);
 }
 
 /*
@@ -904,24 +921,21 @@ xfs_dir2_sf_removename(
 	 * Loop over the old directory entries.
 	 * Find the one we're deleting.
 	 */
-	for (i = 0, sfep = xfs_dir2_sf_firstentry(sfp);
-	     i < sfp->hdr.count;
-	     i++, sfep = xfs_dir2_sf_nextentry(sfp, sfep)) {
-		if (sfep->namelen == args->namelen &&
-		    sfep->name[0] == args->name[0] &&
-		    memcmp(sfep->name, args->name, args->namelen) == 0) {
+	for (i = 0, sfep = xfs_dir2_sf_firstentry(sfp); i < sfp->hdr.count;
+				i++, sfep = xfs_dir2_sf_nextentry(sfp, sfep)) {
+		if (xfs_da_compname(args, sfep->name, sfep->namelen) ==
+								XFS_CMP_EXACT) {
 			ASSERT(xfs_dir2_sf_get_inumber(sfp,
-					xfs_dir2_sf_inumberp(sfep)) ==
-				args->inumber);
+						xfs_dir2_sf_inumberp(sfep)) ==
+								args->inumber);
 			break;
 		}
 	}
 	/*
 	 * Didn't find it.
 	 */
-	if (i == sfp->hdr.count) {
+	if (i == sfp->hdr.count)
 		return XFS_ERROR(ENOENT);
-	}
 	/*
 	 * Calculate sizes.
 	 */
@@ -1042,11 +1056,10 @@ xfs_dir2_sf_replace(
 	 */
 	else {
 		for (i = 0, sfep = xfs_dir2_sf_firstentry(sfp);
-		     i < sfp->hdr.count;
-		     i++, sfep = xfs_dir2_sf_nextentry(sfp, sfep)) {
-			if (sfep->namelen == args->namelen &&
-			    sfep->name[0] == args->name[0] &&
-			    memcmp(args->name, sfep->name, args->namelen) == 0) {
+				i < sfp->hdr.count;
+				i++, sfep = xfs_dir2_sf_nextentry(sfp, sfep)) {
+			if (xfs_da_compname(args, sfep->name, sfep->namelen) ==
+								XFS_CMP_EXACT) {
 #if XFS_BIG_INUMS || defined(DEBUG)
 				ino = xfs_dir2_sf_get_inumber(sfp,
 					xfs_dir2_sf_inumberp(sfep));
@@ -1061,7 +1074,7 @@ xfs_dir2_sf_replace(
 		 * Didn't find it.
 		 */
 		if (i == sfp->hdr.count) {
-			ASSERT(args->oknoent);
+			ASSERT(args->op_flags & XFS_DA_OP_OKNOENT);
 #if XFS_BIG_INUMS
 			if (i8elevated)
 				xfs_dir2_sf_toino4(args);
@@ -1174,7 +1187,7 @@ xfs_dir2_sf_toino4(
 	/*
 	 * Clean up the inode.
 	 */
-	kmem_free(buf, oldsize);
+	kmem_free(buf);
 	dp->i_d.di_size = newsize;
 	xfs_trans_log_inode(args->trans, dp, XFS_ILOG_CORE | XFS_ILOG_DDATA);
 }
@@ -1251,7 +1264,7 @@ xfs_dir2_sf_toino8(
 	/*
 	 * Clean up the inode.
 	 */
-	kmem_free(buf, oldsize);
+	kmem_free(buf);
 	dp->i_d.di_size = newsize;
 	xfs_trans_log_inode(args->trans, dp, XFS_ILOG_CORE | XFS_ILOG_DDATA);
 }
diff --git a/fs/xfs/xfs_dir2_sf.h b/fs/xfs/xfs_dir2_sf.h
index 005629d702d2..deecc9d238f8 100644
--- a/fs/xfs/xfs_dir2_sf.h
+++ b/fs/xfs/xfs_dir2_sf.h
@@ -62,7 +62,7 @@ typedef union {
  * Normalized offset (in a data block) of the entry, really xfs_dir2_data_off_t.
  * Only need 16 bits, this is the byte offset into the single block form.
  */
-typedef struct { __uint8_t i[2]; } xfs_dir2_sf_off_t;
+typedef struct { __uint8_t i[2]; } __arch_pack xfs_dir2_sf_off_t;
 
 /*
  * The parent directory has a dedicated field, and the self-pointer must
@@ -76,14 +76,14 @@ typedef struct xfs_dir2_sf_hdr {
 	__uint8_t		count;		/* count of entries */
 	__uint8_t		i8count;	/* count of 8-byte inode #s */
 	xfs_dir2_inou_t		parent;		/* parent dir inode number */
-} xfs_dir2_sf_hdr_t;
+} __arch_pack xfs_dir2_sf_hdr_t;
 
 typedef struct xfs_dir2_sf_entry {
 	__uint8_t		namelen;	/* actual name length */
 	xfs_dir2_sf_off_t	offset;		/* saved offset */
 	__uint8_t		name[1];	/* name, variable size */
 	xfs_dir2_inou_t		inumber;	/* inode number, var. offset */
-} xfs_dir2_sf_entry_t;
+} __arch_pack xfs_dir2_sf_entry_t; 
 
 typedef struct xfs_dir2_sf {
 	xfs_dir2_sf_hdr_t	hdr;		/* shortform header */
diff --git a/fs/xfs/xfs_dir2_trace.c b/fs/xfs/xfs_dir2_trace.c
index f3fb2ffd6f5c..6cc7c0c681ac 100644
--- a/fs/xfs/xfs_dir2_trace.c
+++ b/fs/xfs/xfs_dir2_trace.c
@@ -85,7 +85,8 @@ xfs_dir2_trace_args(
 		(void *)((unsigned long)(args->inumber >> 32)),
 		(void *)((unsigned long)(args->inumber & 0xFFFFFFFF)),
 		(void *)args->dp, (void *)args->trans,
-		(void *)(unsigned long)args->justcheck, NULL, NULL);
+		(void *)(unsigned long)(args->op_flags & XFS_DA_OP_JUSTCHECK),
+		NULL, NULL);
 }
 
 void
@@ -100,7 +101,7 @@ xfs_dir2_trace_args_b(
 		(void *)((unsigned long)(args->inumber >> 32)),
 		(void *)((unsigned long)(args->inumber & 0xFFFFFFFF)),
 		(void *)args->dp, (void *)args->trans,
-		(void *)(unsigned long)args->justcheck,
+		(void *)(unsigned long)(args->op_flags & XFS_DA_OP_JUSTCHECK),
 		(void *)(bp ? bp->bps[0] : NULL), NULL);
 }
 
@@ -117,7 +118,7 @@ xfs_dir2_trace_args_bb(
 		(void *)((unsigned long)(args->inumber >> 32)),
 		(void *)((unsigned long)(args->inumber & 0xFFFFFFFF)),
 		(void *)args->dp, (void *)args->trans,
-		(void *)(unsigned long)args->justcheck,
+		(void *)(unsigned long)(args->op_flags & XFS_DA_OP_JUSTCHECK),
 		(void *)(lbp ? lbp->bps[0] : NULL),
 		(void *)(dbp ? dbp->bps[0] : NULL));
 }
@@ -157,8 +158,8 @@ xfs_dir2_trace_args_db(
 		(void *)((unsigned long)(args->inumber >> 32)),
 		(void *)((unsigned long)(args->inumber & 0xFFFFFFFF)),
 		(void *)args->dp, (void *)args->trans,
-		(void *)(unsigned long)args->justcheck, (void *)(long)db,
-		(void *)dbp);
+		(void *)(unsigned long)(args->op_flags & XFS_DA_OP_JUSTCHECK),
+		(void *)(long)db, (void *)dbp);
 }
 
 void
@@ -173,7 +174,7 @@ xfs_dir2_trace_args_i(
 		(void *)((unsigned long)(args->inumber >> 32)),
 		(void *)((unsigned long)(args->inumber & 0xFFFFFFFF)),
 		(void *)args->dp, (void *)args->trans,
-		(void *)(unsigned long)args->justcheck,
+		(void *)(unsigned long)(args->op_flags & XFS_DA_OP_JUSTCHECK),
 		(void *)((unsigned long)(i >> 32)),
 		(void *)((unsigned long)(i & 0xFFFFFFFF)));
 }
@@ -190,7 +191,8 @@ xfs_dir2_trace_args_s(
 		(void *)((unsigned long)(args->inumber >> 32)),
 		(void *)((unsigned long)(args->inumber & 0xFFFFFFFF)),
 		(void *)args->dp, (void *)args->trans,
-		(void *)(unsigned long)args->justcheck, (void *)(long)s, NULL);
+		(void *)(unsigned long)(args->op_flags & XFS_DA_OP_JUSTCHECK),
+		(void *)(long)s, NULL);
 }
 
 void
@@ -208,7 +210,7 @@ xfs_dir2_trace_args_sb(
 		(void *)((unsigned long)(args->inumber >> 32)),
 		(void *)((unsigned long)(args->inumber & 0xFFFFFFFF)),
 		(void *)args->dp, (void *)args->trans,
-		(void *)(unsigned long)args->justcheck, (void *)(long)s,
-		(void *)dbp);
+		(void *)(unsigned long)(args->op_flags & XFS_DA_OP_JUSTCHECK),
+		(void *)(long)s, (void *)dbp);
 }
 #endif	/* XFS_DIR2_TRACE */
diff --git a/fs/xfs/xfs_dmapi.h b/fs/xfs/xfs_dmapi.h
index f71784ab6a60..2813cdd72375 100644
--- a/fs/xfs/xfs_dmapi.h
+++ b/fs/xfs/xfs_dmapi.h
@@ -18,7 +18,6 @@
 #ifndef __XFS_DMAPI_H__
 #define __XFS_DMAPI_H__
 
-#include <linux/version.h>
 /*	Values used to define the on-disk version of dm_attrname_t. All
  *	on-disk attribute names start with the 8-byte string "SGI_DMI_".
  *
@@ -166,6 +165,6 @@ typedef enum {
 
 #define FILP_DELAY_FLAG(filp) ((filp->f_flags&(O_NDELAY|O_NONBLOCK)) ? \
 			DM_FLAGS_NDELAY : 0)
-#define AT_DELAY_FLAG(f) ((f&ATTR_NONBLOCK) ? DM_FLAGS_NDELAY : 0)
+#define AT_DELAY_FLAG(f) ((f & XFS_ATTR_NONBLOCK) ? DM_FLAGS_NDELAY : 0)
 
 #endif  /* __XFS_DMAPI_H__ */
diff --git a/fs/xfs/xfs_error.c b/fs/xfs/xfs_error.c
index 05e5365d3c31..f227ecd1a294 100644
--- a/fs/xfs/xfs_error.c
+++ b/fs/xfs/xfs_error.c
@@ -58,22 +58,11 @@ xfs_error_trap(int e)
 	}
 	return e;
 }
-#endif
-
-#if (defined(DEBUG) || defined(INDUCE_IO_ERROR))
 
 int	xfs_etest[XFS_NUM_INJECT_ERROR];
 int64_t	xfs_etest_fsid[XFS_NUM_INJECT_ERROR];
 char *	xfs_etest_fsname[XFS_NUM_INJECT_ERROR];
 
-void
-xfs_error_test_init(void)
-{
-	memset(xfs_etest, 0, sizeof(xfs_etest));
-	memset(xfs_etest_fsid, 0, sizeof(xfs_etest_fsid));
-	memset(xfs_etest_fsname, 0, sizeof(xfs_etest_fsname));
-}
-
 int
 xfs_error_test(int error_tag, int *fsidp, char *expression,
 	       int line, char *file, unsigned long randfactor)
@@ -150,8 +139,7 @@ xfs_errortag_clearall(xfs_mount_t *mp, int loud)
 				xfs_etest[i]);
 			xfs_etest[i] = 0;
 			xfs_etest_fsid[i] = 0LL;
-			kmem_free(xfs_etest_fsname[i],
-				  strlen(xfs_etest_fsname[i]) + 1);
+			kmem_free(xfs_etest_fsname[i]);
 			xfs_etest_fsname[i] = NULL;
 		}
 	}
@@ -163,7 +151,7 @@ xfs_errortag_clearall(xfs_mount_t *mp, int loud)
 
 	return 0;
 }
-#endif /* DEBUG || INDUCE_IO_ERROR */
+#endif /* DEBUG */
 
 static void
 xfs_fs_vcmn_err(int level, xfs_mount_t *mp, char *fmt, va_list ap)
@@ -175,7 +163,7 @@ xfs_fs_vcmn_err(int level, xfs_mount_t *mp, char *fmt, va_list ap)
 		newfmt = kmem_alloc(len, KM_SLEEP);
 		sprintf(newfmt, "Filesystem \"%s\": %s", mp->m_fsname, fmt);
 		icmn_err(level, newfmt, ap);
-		kmem_free(newfmt, len);
+		kmem_free(newfmt);
 	} else {
 		icmn_err(level, fmt, ap);
 	}
diff --git a/fs/xfs/xfs_error.h b/fs/xfs/xfs_error.h
index 6490d2a9f8e1..11543f10b0c6 100644
--- a/fs/xfs/xfs_error.h
+++ b/fs/xfs/xfs_error.h
@@ -125,23 +125,14 @@ extern void xfs_corruption_error(char *tag, int level, struct xfs_mount *mp,
 #define XFS_RANDOM_DIOWRITE_IOERR			(XFS_RANDOM_DEFAULT/10)
 #define	XFS_RANDOM_BMAPIFORMAT				XFS_RANDOM_DEFAULT
 
-#if (defined(DEBUG) || defined(INDUCE_IO_ERROR))
+#ifdef DEBUG
 extern int xfs_error_test(int, int *, char *, int, char *, unsigned long);
-extern void xfs_error_test_init(void);
 
 #define	XFS_NUM_INJECT_ERROR				10
-
-#ifdef __ANSI_CPP__
-#define XFS_TEST_ERROR(expr, mp, tag, rf)		\
-	((expr) || \
-	 xfs_error_test((tag), (mp)->m_fixedfsid, #expr, __LINE__, __FILE__, \
-			 (rf)))
-#else
 #define XFS_TEST_ERROR(expr, mp, tag, rf)		\
 	((expr) || \
 	 xfs_error_test((tag), (mp)->m_fixedfsid, "expr", __LINE__, __FILE__, \
 			(rf)))
-#endif /* __ANSI_CPP__ */
 
 extern int xfs_errortag_add(int error_tag, xfs_mount_t *mp);
 extern int xfs_errortag_clearall(xfs_mount_t *mp, int loud);
@@ -149,7 +140,7 @@ extern int xfs_errortag_clearall(xfs_mount_t *mp, int loud);
 #define XFS_TEST_ERROR(expr, mp, tag, rf)	(expr)
 #define xfs_errortag_add(tag, mp)		(ENOSYS)
 #define xfs_errortag_clearall(mp, loud)		(ENOSYS)
-#endif /* (DEBUG || INDUCE_IO_ERROR) */
+#endif /* DEBUG */
 
 /*
  * XFS panic tags -- allow a call to xfs_cmn_err() be turned into
diff --git a/fs/xfs/xfs_extfree_item.c b/fs/xfs/xfs_extfree_item.c
index 132bd07b9bb8..8aa28f751b2a 100644
--- a/fs/xfs/xfs_extfree_item.c
+++ b/fs/xfs/xfs_extfree_item.c
@@ -41,8 +41,7 @@ xfs_efi_item_free(xfs_efi_log_item_t *efip)
 	int nexts = efip->efi_format.efi_nextents;
 
 	if (nexts > XFS_EFI_MAX_FAST_EXTENTS) {
-		kmem_free(efip, sizeof(xfs_efi_log_item_t) +
-				(nexts - 1) * sizeof(xfs_extent_t));
+		kmem_free(efip);
 	} else {
 		kmem_zone_free(xfs_efi_zone, efip);
 	}
@@ -374,8 +373,7 @@ xfs_efd_item_free(xfs_efd_log_item_t *efdp)
 	int nexts = efdp->efd_format.efd_nextents;
 
 	if (nexts > XFS_EFD_MAX_FAST_EXTENTS) {
-		kmem_free(efdp, sizeof(xfs_efd_log_item_t) +
-				(nexts - 1) * sizeof(xfs_extent_t));
+		kmem_free(efdp);
 	} else {
 		kmem_zone_free(xfs_efd_zone, efdp);
 	}
diff --git a/fs/xfs/xfs_filestream.c b/fs/xfs/xfs_filestream.c
index 3f3785b10804..f3bb75da384e 100644
--- a/fs/xfs/xfs_filestream.c
+++ b/fs/xfs/xfs_filestream.c
@@ -397,10 +397,12 @@ int
 xfs_filestream_init(void)
 {
 	item_zone = kmem_zone_init(sizeof(fstrm_item_t), "fstrm_item");
+	if (!item_zone)
+		return -ENOMEM;
 #ifdef XFS_FILESTREAMS_TRACE
-	xfs_filestreams_trace_buf = ktrace_alloc(XFS_FSTRM_KTRACE_SIZE, KM_SLEEP);
+	xfs_filestreams_trace_buf = ktrace_alloc(XFS_FSTRM_KTRACE_SIZE, KM_NOFS);
 #endif
-	return item_zone ? 0 : -ENOMEM;
+	return 0;
 }
 
 /*
diff --git a/fs/xfs/xfs_fs.h b/fs/xfs/xfs_fs.h
index 3bed6433d050..01c0cc88d3f3 100644
--- a/fs/xfs/xfs_fs.h
+++ b/fs/xfs/xfs_fs.h
@@ -239,6 +239,7 @@ typedef struct xfs_fsop_resblks {
 #define XFS_FSOP_GEOM_FLAGS_LOGV2	0x0100	/* log format version 2	*/
 #define XFS_FSOP_GEOM_FLAGS_SECTOR	0x0200	/* sector sizes >1BB	*/
 #define XFS_FSOP_GEOM_FLAGS_ATTR2	0x0400	/* inline attributes rework */
+#define XFS_FSOP_GEOM_FLAGS_DIRV2CI	0x1000	/* ASCII only CI names */
 #define XFS_FSOP_GEOM_FLAGS_LAZYSB	0x4000	/* lazy superblock counters */
 
 
@@ -371,6 +372,9 @@ typedef struct xfs_fsop_attrlist_handlereq {
 
 typedef struct xfs_attr_multiop {
 	__u32		am_opcode;
+#define ATTR_OP_GET	1	/* return the indicated attr's value */
+#define ATTR_OP_SET	2	/* set/create the indicated attr/value pair */
+#define ATTR_OP_REMOVE	3	/* remove the indicated attr */
 	__s32		am_error;
 	void		__user *am_attrname;
 	void		__user *am_attrvalue;
diff --git a/fs/xfs/xfs_fsops.c b/fs/xfs/xfs_fsops.c
index 381ebda4f7bc..84583cf73db3 100644
--- a/fs/xfs/xfs_fsops.c
+++ b/fs/xfs/xfs_fsops.c
@@ -95,6 +95,8 @@ xfs_fs_geometry(
 				XFS_FSOP_GEOM_FLAGS_DIRV2 : 0) |
 			(xfs_sb_version_hassector(&mp->m_sb) ?
 				XFS_FSOP_GEOM_FLAGS_SECTOR : 0) |
+			(xfs_sb_version_hasasciici(&mp->m_sb) ?
+				XFS_FSOP_GEOM_FLAGS_DIRV2CI : 0) |
 			(xfs_sb_version_haslazysbcount(&mp->m_sb) ?
 				XFS_FSOP_GEOM_FLAGS_LAZYSB : 0) |
 			(xfs_sb_version_hasattr2(&mp->m_sb) ?
@@ -625,7 +627,7 @@ xfs_fs_goingdown(
 			xfs_force_shutdown(mp, SHUTDOWN_FORCE_UMOUNT);
 			thaw_bdev(sb->s_bdev, sb);
 		}
-	
+
 		break;
 	}
 	case XFS_FSOP_GOING_FLAGS_LOGFLUSH:
diff --git a/fs/xfs/xfs_ialloc_btree.c b/fs/xfs/xfs_ialloc_btree.c
index e5310c90e50f..83502f3edef0 100644
--- a/fs/xfs/xfs_ialloc_btree.c
+++ b/fs/xfs/xfs_ialloc_btree.c
@@ -181,7 +181,7 @@ xfs_inobt_delrec(
 		 * then we can get rid of this level.
 		 */
 		if (numrecs == 1 && level > 0) {
-			agbp = cur->bc_private.i.agbp;
+			agbp = cur->bc_private.a.agbp;
 			agi = XFS_BUF_TO_AGI(agbp);
 			/*
 			 * pp is still set to the first pointer in the block.
@@ -194,7 +194,7 @@ xfs_inobt_delrec(
 			 * Free the block.
 			 */
 			if ((error = xfs_free_extent(cur->bc_tp,
-				XFS_AGB_TO_FSB(mp, cur->bc_private.i.agno, bno), 1)))
+				XFS_AGB_TO_FSB(mp, cur->bc_private.a.agno, bno), 1)))
 				return error;
 			xfs_trans_binval(cur->bc_tp, bp);
 			xfs_ialloc_log_agi(cur->bc_tp, agbp,
@@ -379,7 +379,7 @@ xfs_inobt_delrec(
 		rrecs = be16_to_cpu(right->bb_numrecs);
 		rbp = bp;
 		if ((error = xfs_btree_read_bufs(mp, cur->bc_tp,
-				cur->bc_private.i.agno, lbno, 0, &lbp,
+				cur->bc_private.a.agno, lbno, 0, &lbp,
 				XFS_INO_BTREE_REF)))
 			return error;
 		left = XFS_BUF_TO_INOBT_BLOCK(lbp);
@@ -401,7 +401,7 @@ xfs_inobt_delrec(
 		lrecs = be16_to_cpu(left->bb_numrecs);
 		lbp = bp;
 		if ((error = xfs_btree_read_bufs(mp, cur->bc_tp,
-				cur->bc_private.i.agno, rbno, 0, &rbp,
+				cur->bc_private.a.agno, rbno, 0, &rbp,
 				XFS_INO_BTREE_REF)))
 			return error;
 		right = XFS_BUF_TO_INOBT_BLOCK(rbp);
@@ -484,7 +484,7 @@ xfs_inobt_delrec(
 		xfs_buf_t		*rrbp;
 
 		if ((error = xfs_btree_read_bufs(mp, cur->bc_tp,
-				cur->bc_private.i.agno, be32_to_cpu(left->bb_rightsib), 0,
+				cur->bc_private.a.agno, be32_to_cpu(left->bb_rightsib), 0,
 				&rrbp, XFS_INO_BTREE_REF)))
 			return error;
 		rrblock = XFS_BUF_TO_INOBT_BLOCK(rrbp);
@@ -497,7 +497,7 @@ xfs_inobt_delrec(
 	 * Free the deleting block.
 	 */
 	if ((error = xfs_free_extent(cur->bc_tp, XFS_AGB_TO_FSB(mp,
-				     cur->bc_private.i.agno, rbno), 1)))
+				     cur->bc_private.a.agno, rbno), 1)))
 		return error;
 	xfs_trans_binval(cur->bc_tp, rbp);
 	/*
@@ -854,7 +854,7 @@ xfs_inobt_lookup(
 	{
 		xfs_agi_t	*agi;	/* a.g. inode header */
 
-		agi = XFS_BUF_TO_AGI(cur->bc_private.i.agbp);
+		agi = XFS_BUF_TO_AGI(cur->bc_private.a.agbp);
 		agno = be32_to_cpu(agi->agi_seqno);
 		agbno = be32_to_cpu(agi->agi_root);
 	}
@@ -1089,7 +1089,7 @@ xfs_inobt_lshift(
 	 * Set up the left neighbor as "left".
 	 */
 	if ((error = xfs_btree_read_bufs(cur->bc_mp, cur->bc_tp,
-			cur->bc_private.i.agno, be32_to_cpu(right->bb_leftsib),
+			cur->bc_private.a.agno, be32_to_cpu(right->bb_leftsib),
 			0, &lbp, XFS_INO_BTREE_REF)))
 		return error;
 	left = XFS_BUF_TO_INOBT_BLOCK(lbp);
@@ -1207,10 +1207,10 @@ xfs_inobt_newroot(
 	/*
 	 * Get a block & a buffer.
 	 */
-	agi = XFS_BUF_TO_AGI(cur->bc_private.i.agbp);
+	agi = XFS_BUF_TO_AGI(cur->bc_private.a.agbp);
 	args.tp = cur->bc_tp;
 	args.mp = cur->bc_mp;
-	args.fsbno = XFS_AGB_TO_FSB(args.mp, cur->bc_private.i.agno,
+	args.fsbno = XFS_AGB_TO_FSB(args.mp, cur->bc_private.a.agno,
 		be32_to_cpu(agi->agi_root));
 	args.mod = args.minleft = args.alignment = args.total = args.wasdel =
 		args.isfl = args.userdata = args.minalignslop = 0;
@@ -1233,7 +1233,7 @@ xfs_inobt_newroot(
 	 */
 	agi->agi_root = cpu_to_be32(args.agbno);
 	be32_add_cpu(&agi->agi_level, 1);
-	xfs_ialloc_log_agi(args.tp, cur->bc_private.i.agbp,
+	xfs_ialloc_log_agi(args.tp, cur->bc_private.a.agbp,
 		XFS_AGI_ROOT | XFS_AGI_LEVEL);
 	/*
 	 * At the previous root level there are now two blocks: the old
@@ -1376,7 +1376,7 @@ xfs_inobt_rshift(
 	 * Set up the right neighbor as "right".
 	 */
 	if ((error = xfs_btree_read_bufs(cur->bc_mp, cur->bc_tp,
-			cur->bc_private.i.agno, be32_to_cpu(left->bb_rightsib),
+			cur->bc_private.a.agno, be32_to_cpu(left->bb_rightsib),
 			0, &rbp, XFS_INO_BTREE_REF)))
 		return error;
 	right = XFS_BUF_TO_INOBT_BLOCK(rbp);
@@ -1492,7 +1492,7 @@ xfs_inobt_split(
 	 * Allocate the new block.
 	 * If we can't do it, we're toast.  Give up.
 	 */
-	args.fsbno = XFS_AGB_TO_FSB(args.mp, cur->bc_private.i.agno, lbno);
+	args.fsbno = XFS_AGB_TO_FSB(args.mp, cur->bc_private.a.agno, lbno);
 	args.mod = args.minleft = args.alignment = args.total = args.wasdel =
 		args.isfl = args.userdata = args.minalignslop = 0;
 	args.minlen = args.maxlen = args.prod = 1;
@@ -1725,7 +1725,7 @@ xfs_inobt_decrement(
 
 		agbno = be32_to_cpu(*XFS_INOBT_PTR_ADDR(block, cur->bc_ptrs[lev], cur));
 		if ((error = xfs_btree_read_bufs(cur->bc_mp, cur->bc_tp,
-				cur->bc_private.i.agno, agbno, 0, &bp,
+				cur->bc_private.a.agno, agbno, 0, &bp,
 				XFS_INO_BTREE_REF)))
 			return error;
 		lev--;
@@ -1897,7 +1897,7 @@ xfs_inobt_increment(
 
 		agbno = be32_to_cpu(*XFS_INOBT_PTR_ADDR(block, cur->bc_ptrs[lev], cur));
 		if ((error = xfs_btree_read_bufs(cur->bc_mp, cur->bc_tp,
-				cur->bc_private.i.agno, agbno, 0, &bp,
+				cur->bc_private.a.agno, agbno, 0, &bp,
 				XFS_INO_BTREE_REF)))
 			return error;
 		lev--;
diff --git a/fs/xfs/xfs_iget.c b/fs/xfs/xfs_iget.c
index b07604b94d9f..e229e9e001c2 100644
--- a/fs/xfs/xfs_iget.c
+++ b/fs/xfs/xfs_iget.c
@@ -216,7 +216,14 @@ finish_inode:
 	mrlock_init(&ip->i_iolock, MRLOCK_BARRIER, "xfsio", ip->i_ino);
 	init_waitqueue_head(&ip->i_ipin_wait);
 	atomic_set(&ip->i_pincount, 0);
-	initnsema(&ip->i_flock, 1, "xfsfino");
+
+	/*
+	 * Because we want to use a counting completion, complete
+	 * the flush completion once to allow a single access to
+	 * the flush completion without blocking.
+	 */
+	init_completion(&ip->i_flush);
+	complete(&ip->i_flush);
 
 	if (lock_flags)
 		xfs_ilock(ip, lock_flags);
@@ -288,10 +295,17 @@ finish_inode:
 	*ipp = ip;
 
 	/*
+	 * Set up the Linux with the Linux inode.
+	 */
+	ip->i_vnode = inode;
+	inode->i_private = ip;
+
+	/*
 	 * If we have a real type for an on-disk inode, we can set ops(&unlock)
 	 * now.	 If it's a new inode being created, xfs_ialloc will handle it.
 	 */
-	xfs_initialize_vnode(mp, inode, ip);
+	if (ip->i_d.di_mode != 0)
+		xfs_setup_inode(ip);
 	return 0;
 }
 
@@ -411,10 +425,11 @@ xfs_iput(xfs_inode_t	*ip,
  * Special iput for brand-new inodes that are still locked
  */
 void
-xfs_iput_new(xfs_inode_t	*ip,
-	     uint		lock_flags)
+xfs_iput_new(
+	xfs_inode_t	*ip,
+	uint		lock_flags)
 {
-	struct inode	*inode = ip->i_vnode;
+	struct inode	*inode = VFS_I(ip);
 
 	xfs_itrace_entry(ip);
 
@@ -775,26 +790,3 @@ xfs_isilocked(
 }
 #endif
 
-/*
- * The following three routines simply manage the i_flock
- * semaphore embedded in the inode.  This semaphore synchronizes
- * processes attempting to flush the in-core inode back to disk.
- */
-void
-xfs_iflock(xfs_inode_t *ip)
-{
-	psema(&(ip->i_flock), PINOD|PLTWAIT);
-}
-
-int
-xfs_iflock_nowait(xfs_inode_t *ip)
-{
-	return (cpsema(&(ip->i_flock)));
-}
-
-void
-xfs_ifunlock(xfs_inode_t *ip)
-{
-	ASSERT(issemalocked(&(ip->i_flock)));
-	vsema(&(ip->i_flock));
-}
diff --git a/fs/xfs/xfs_inode.c b/fs/xfs/xfs_inode.c
index e569bf5d6cf0..00e80df9dd9d 100644
--- a/fs/xfs/xfs_inode.c
+++ b/fs/xfs/xfs_inode.c
@@ -580,8 +580,8 @@ xfs_iformat_extents(
 		xfs_validate_extents(ifp, nex, XFS_EXTFMT_INODE(ip));
 		for (i = 0; i < nex; i++, dp++) {
 			xfs_bmbt_rec_host_t *ep = xfs_iext_get_ext(ifp, i);
-			ep->l0 = be64_to_cpu(get_unaligned(&dp->l0));
-			ep->l1 = be64_to_cpu(get_unaligned(&dp->l1));
+			ep->l0 = get_unaligned_be64(&dp->l0);
+			ep->l1 = get_unaligned_be64(&dp->l1);
 		}
 		XFS_BMAP_TRACE_EXLIST(ip, nex, whichfork);
 		if (whichfork != XFS_DATA_FORK ||
@@ -835,22 +835,22 @@ xfs_iread(
 	 * Do this before xfs_iformat in case it adds entries.
 	 */
 #ifdef	XFS_INODE_TRACE
-	ip->i_trace = ktrace_alloc(INODE_TRACE_SIZE, KM_SLEEP);
+	ip->i_trace = ktrace_alloc(INODE_TRACE_SIZE, KM_NOFS);
 #endif
 #ifdef XFS_BMAP_TRACE
-	ip->i_xtrace = ktrace_alloc(XFS_BMAP_KTRACE_SIZE, KM_SLEEP);
+	ip->i_xtrace = ktrace_alloc(XFS_BMAP_KTRACE_SIZE, KM_NOFS);
 #endif
 #ifdef XFS_BMBT_TRACE
-	ip->i_btrace = ktrace_alloc(XFS_BMBT_KTRACE_SIZE, KM_SLEEP);
+	ip->i_btrace = ktrace_alloc(XFS_BMBT_KTRACE_SIZE, KM_NOFS);
 #endif
 #ifdef XFS_RW_TRACE
-	ip->i_rwtrace = ktrace_alloc(XFS_RW_KTRACE_SIZE, KM_SLEEP);
+	ip->i_rwtrace = ktrace_alloc(XFS_RW_KTRACE_SIZE, KM_NOFS);
 #endif
 #ifdef XFS_ILOCK_TRACE
-	ip->i_lock_trace = ktrace_alloc(XFS_ILOCK_KTRACE_SIZE, KM_SLEEP);
+	ip->i_lock_trace = ktrace_alloc(XFS_ILOCK_KTRACE_SIZE, KM_NOFS);
 #endif
 #ifdef XFS_DIR2_TRACE
-	ip->i_dir_trace = ktrace_alloc(XFS_DIR2_KTRACE_SIZE, KM_SLEEP);
+	ip->i_dir_trace = ktrace_alloc(XFS_DIR2_KTRACE_SIZE, KM_NOFS);
 #endif
 
 	/*
@@ -1046,9 +1046,9 @@ xfs_ialloc(
 {
 	xfs_ino_t	ino;
 	xfs_inode_t	*ip;
-	bhv_vnode_t	*vp;
 	uint		flags;
 	int		error;
+	timespec_t	tv;
 
 	/*
 	 * Call the space management code to pick
@@ -1077,13 +1077,12 @@ xfs_ialloc(
 	}
 	ASSERT(ip != NULL);
 
-	vp = XFS_ITOV(ip);
 	ip->i_d.di_mode = (__uint16_t)mode;
 	ip->i_d.di_onlink = 0;
 	ip->i_d.di_nlink = nlink;
 	ASSERT(ip->i_d.di_nlink == nlink);
-	ip->i_d.di_uid = current_fsuid(cr);
-	ip->i_d.di_gid = current_fsgid(cr);
+	ip->i_d.di_uid = current_fsuid();
+	ip->i_d.di_gid = current_fsgid();
 	ip->i_d.di_projid = prid;
 	memset(&(ip->i_d.di_pad[0]), 0, sizeof(ip->i_d.di_pad));
 
@@ -1130,7 +1129,13 @@ xfs_ialloc(
 	ip->i_size = 0;
 	ip->i_d.di_nextents = 0;
 	ASSERT(ip->i_d.di_nblocks == 0);
-	xfs_ichgtime(ip, XFS_ICHGTIME_CHG|XFS_ICHGTIME_ACC|XFS_ICHGTIME_MOD);
+
+	nanotime(&tv);
+	ip->i_d.di_mtime.t_sec = (__int32_t)tv.tv_sec;
+	ip->i_d.di_mtime.t_nsec = (__int32_t)tv.tv_nsec;
+	ip->i_d.di_atime = ip->i_d.di_mtime;
+	ip->i_d.di_ctime = ip->i_d.di_mtime;
+
 	/*
 	 * di_gen will have been taken care of in xfs_iread.
 	 */
@@ -1220,7 +1225,7 @@ xfs_ialloc(
 	xfs_trans_log_inode(tp, ip, flags);
 
 	/* now that we have an i_mode we can setup inode ops and unlock */
-	xfs_initialize_vnode(tp->t_mountp, vp, ip);
+	xfs_setup_inode(ip);
 
 	*ipp = ip;
 	return 0;
@@ -1399,7 +1404,6 @@ xfs_itruncate_start(
 	xfs_fsize_t	last_byte;
 	xfs_off_t	toss_start;
 	xfs_mount_t	*mp;
-	bhv_vnode_t	*vp;
 	int		error = 0;
 
 	ASSERT(xfs_isilocked(ip, XFS_IOLOCK_EXCL));
@@ -1408,7 +1412,6 @@ xfs_itruncate_start(
 	       (flags == XFS_ITRUNC_MAYBE));
 
 	mp = ip->i_mount;
-	vp = XFS_ITOV(ip);
 
 	/* wait for the completion of any pending DIOs */
 	if (new_size < ip->i_size)
@@ -1457,7 +1460,7 @@ xfs_itruncate_start(
 
 #ifdef DEBUG
 	if (new_size == 0) {
-		ASSERT(VN_CACHED(vp) == 0);
+		ASSERT(VN_CACHED(VFS_I(ip)) == 0);
 	}
 #endif
 	return error;
@@ -1763,67 +1766,6 @@ xfs_itruncate_finish(
 	return 0;
 }
 
-
-/*
- * xfs_igrow_start
- *
- * Do the first part of growing a file: zero any data in the last
- * block that is beyond the old EOF.  We need to do this before
- * the inode is joined to the transaction to modify the i_size.
- * That way we can drop the inode lock and call into the buffer
- * cache to get the buffer mapping the EOF.
- */
-int
-xfs_igrow_start(
-	xfs_inode_t	*ip,
-	xfs_fsize_t	new_size,
-	cred_t		*credp)
-{
-	ASSERT(xfs_isilocked(ip, XFS_ILOCK_EXCL|XFS_IOLOCK_EXCL));
-	ASSERT(new_size > ip->i_size);
-
-	/*
-	 * Zero any pages that may have been created by
-	 * xfs_write_file() beyond the end of the file
-	 * and any blocks between the old and new file sizes.
-	 */
-	return xfs_zero_eof(ip, new_size, ip->i_size);
-}
-
-/*
- * xfs_igrow_finish
- *
- * This routine is called to extend the size of a file.
- * The inode must have both the iolock and the ilock locked
- * for update and it must be a part of the current transaction.
- * The xfs_igrow_start() function must have been called previously.
- * If the change_flag is not zero, the inode change timestamp will
- * be updated.
- */
-void
-xfs_igrow_finish(
-	xfs_trans_t	*tp,
-	xfs_inode_t	*ip,
-	xfs_fsize_t	new_size,
-	int		change_flag)
-{
-	ASSERT(xfs_isilocked(ip, XFS_ILOCK_EXCL|XFS_IOLOCK_EXCL));
-	ASSERT(ip->i_transp == tp);
-	ASSERT(new_size > ip->i_size);
-
-	/*
-	 * Update the file size.  Update the inode change timestamp
-	 * if change_flag set.
-	 */
-	ip->i_d.di_size = new_size;
-	ip->i_size = new_size;
-	if (change_flag)
-		xfs_ichgtime(ip, XFS_ICHGTIME_CHG);
-	xfs_trans_log_inode(tp, ip, XFS_ILOG_CORE);
-
-}
-
-
 /*
  * This is called when the inode's link count goes to 0.
  * We place the on-disk inode on a list in the AGI.  It
@@ -2258,7 +2200,7 @@ xfs_ifree_cluster(
 		xfs_trans_binval(tp, bp);
 	}
 
-	kmem_free(ip_found, ninodes * sizeof(xfs_inode_t *));
+	kmem_free(ip_found);
 	xfs_put_perag(mp, pag);
 }
 
@@ -2470,7 +2412,7 @@ xfs_iroot_realloc(
 						     (int)new_size);
 		memcpy(np, op, new_max * (uint)sizeof(xfs_dfsbno_t));
 	}
-	kmem_free(ifp->if_broot, ifp->if_broot_bytes);
+	kmem_free(ifp->if_broot);
 	ifp->if_broot = new_broot;
 	ifp->if_broot_bytes = (int)new_size;
 	ASSERT(ifp->if_broot_bytes <=
@@ -2514,7 +2456,7 @@ xfs_idata_realloc(
 
 	if (new_size == 0) {
 		if (ifp->if_u1.if_data != ifp->if_u2.if_inline_data) {
-			kmem_free(ifp->if_u1.if_data, ifp->if_real_bytes);
+			kmem_free(ifp->if_u1.if_data);
 		}
 		ifp->if_u1.if_data = NULL;
 		real_size = 0;
@@ -2529,7 +2471,7 @@ xfs_idata_realloc(
 			ASSERT(ifp->if_real_bytes != 0);
 			memcpy(ifp->if_u2.if_inline_data, ifp->if_u1.if_data,
 			      new_size);
-			kmem_free(ifp->if_u1.if_data, ifp->if_real_bytes);
+			kmem_free(ifp->if_u1.if_data);
 			ifp->if_u1.if_data = ifp->if_u2.if_inline_data;
 		}
 		real_size = 0;
@@ -2636,7 +2578,7 @@ xfs_idestroy_fork(
 
 	ifp = XFS_IFORK_PTR(ip, whichfork);
 	if (ifp->if_broot != NULL) {
-		kmem_free(ifp->if_broot, ifp->if_broot_bytes);
+		kmem_free(ifp->if_broot);
 		ifp->if_broot = NULL;
 	}
 
@@ -2650,7 +2592,7 @@ xfs_idestroy_fork(
 		if ((ifp->if_u1.if_data != ifp->if_u2.if_inline_data) &&
 		    (ifp->if_u1.if_data != NULL)) {
 			ASSERT(ifp->if_real_bytes != 0);
-			kmem_free(ifp->if_u1.if_data, ifp->if_real_bytes);
+			kmem_free(ifp->if_u1.if_data);
 			ifp->if_u1.if_data = NULL;
 			ifp->if_real_bytes = 0;
 		}
@@ -2691,7 +2633,6 @@ xfs_idestroy(
 		xfs_idestroy_fork(ip, XFS_ATTR_FORK);
 	mrfree(&ip->i_lock);
 	mrfree(&ip->i_iolock);
-	freesema(&ip->i_flock);
 
 #ifdef XFS_INODE_TRACE
 	ktrace_free(ip->i_trace);
@@ -3058,7 +2999,7 @@ xfs_iflush_cluster(
 
 out_free:
 	read_unlock(&pag->pag_ici_lock);
-	kmem_free(ilist, ilist_size);
+	kmem_free(ilist);
 	return 0;
 
 
@@ -3102,17 +3043,17 @@ cluster_corrupt_out:
 	 * Unlocks the flush lock
 	 */
 	xfs_iflush_abort(iq);
-	kmem_free(ilist, ilist_size);
+	kmem_free(ilist);
 	return XFS_ERROR(EFSCORRUPTED);
 }
 
 /*
  * xfs_iflush() will write a modified inode's changes out to the
  * inode's on disk home.  The caller must have the inode lock held
- * in at least shared mode and the inode flush semaphore must be
- * held as well.  The inode lock will still be held upon return from
+ * in at least shared mode and the inode flush completion must be
+ * active as well.  The inode lock will still be held upon return from
  * the call and the caller is free to unlock it.
- * The inode flush lock will be unlocked when the inode reaches the disk.
+ * The inode flush will be completed when the inode reaches the disk.
  * The flags indicate how the inode's buffer should be written out.
  */
 int
@@ -3131,7 +3072,7 @@ xfs_iflush(
 	XFS_STATS_INC(xs_iflush_count);
 
 	ASSERT(xfs_isilocked(ip, XFS_ILOCK_EXCL|XFS_ILOCK_SHARED));
-	ASSERT(issemalocked(&(ip->i_flock)));
+	ASSERT(!completion_done(&ip->i_flush));
 	ASSERT(ip->i_d.di_format != XFS_DINODE_FMT_BTREE ||
 	       ip->i_d.di_nextents > ip->i_df.if_ext_max);
 
@@ -3143,8 +3084,6 @@ xfs_iflush(
 	 * flush lock and do nothing.
 	 */
 	if (xfs_inode_clean(ip)) {
-		ASSERT((iip != NULL) ?
-			 !(iip->ili_item.li_flags & XFS_LI_IN_AIL) : 1);
 		xfs_ifunlock(ip);
 		return 0;
 	}
@@ -3296,7 +3235,7 @@ xfs_iflush_int(
 #endif
 
 	ASSERT(xfs_isilocked(ip, XFS_ILOCK_EXCL|XFS_ILOCK_SHARED));
-	ASSERT(issemalocked(&(ip->i_flock)));
+	ASSERT(!completion_done(&ip->i_flush));
 	ASSERT(ip->i_d.di_format != XFS_DINODE_FMT_BTREE ||
 	       ip->i_d.di_nextents > ip->i_df.if_ext_max);
 
@@ -3528,7 +3467,6 @@ xfs_iflush_all(
 	xfs_mount_t	*mp)
 {
 	xfs_inode_t	*ip;
-	bhv_vnode_t	*vp;
 
  again:
 	XFS_MOUNT_ILOCK(mp);
@@ -3543,14 +3481,13 @@ xfs_iflush_all(
 			continue;
 		}
 
-		vp = XFS_ITOV_NULL(ip);
-		if (!vp) {
+		if (!VFS_I(ip)) {
 			XFS_MOUNT_IUNLOCK(mp);
 			xfs_finish_reclaim(ip, 0, XFS_IFLUSH_ASYNC);
 			goto again;
 		}
 
-		ASSERT(vn_count(vp) == 0);
+		ASSERT(vn_count(VFS_I(ip)) == 0);
 
 		ip = ip->i_mnext;
 	} while (ip != mp->m_inodes);
@@ -3770,7 +3707,7 @@ xfs_iext_add_indirect_multi(
 	 * (all extents past */
 	if (nex2) {
 		byte_diff = nex2 * sizeof(xfs_bmbt_rec_t);
-		nex2_ep = (xfs_bmbt_rec_t *) kmem_alloc(byte_diff, KM_SLEEP);
+		nex2_ep = (xfs_bmbt_rec_t *) kmem_alloc(byte_diff, KM_NOFS);
 		memmove(nex2_ep, &erp->er_extbuf[idx], byte_diff);
 		erp->er_extcount -= nex2;
 		xfs_iext_irec_update_extoffs(ifp, erp_idx + 1, -nex2);
@@ -3836,7 +3773,7 @@ xfs_iext_add_indirect_multi(
 			erp = xfs_iext_irec_new(ifp, erp_idx);
 		}
 		memmove(&erp->er_extbuf[i], nex2_ep, byte_diff);
-		kmem_free(nex2_ep, byte_diff);
+		kmem_free(nex2_ep);
 		erp->er_extcount += nex2;
 		xfs_iext_irec_update_extoffs(ifp, erp_idx + 1, nex2);
 	}
@@ -4070,8 +4007,7 @@ xfs_iext_realloc_direct(
 			ifp->if_u1.if_extents =
 				kmem_realloc(ifp->if_u1.if_extents,
 						rnew_size,
-						ifp->if_real_bytes,
-						KM_SLEEP);
+						ifp->if_real_bytes, KM_NOFS);
 		}
 		if (rnew_size > ifp->if_real_bytes) {
 			memset(&ifp->if_u1.if_extents[ifp->if_bytes /
@@ -4112,7 +4048,7 @@ xfs_iext_direct_to_inline(
 	 */
 	memcpy(ifp->if_u2.if_inline_ext, ifp->if_u1.if_extents,
 		nextents * sizeof(xfs_bmbt_rec_t));
-	kmem_free(ifp->if_u1.if_extents, ifp->if_real_bytes);
+	kmem_free(ifp->if_u1.if_extents);
 	ifp->if_u1.if_extents = ifp->if_u2.if_inline_ext;
 	ifp->if_real_bytes = 0;
 }
@@ -4130,7 +4066,7 @@ xfs_iext_inline_to_direct(
 	xfs_ifork_t	*ifp,		/* inode fork pointer */
 	int		new_size)	/* number of extents in file */
 {
-	ifp->if_u1.if_extents = kmem_alloc(new_size, KM_SLEEP);
+	ifp->if_u1.if_extents = kmem_alloc(new_size, KM_NOFS);
 	memset(ifp->if_u1.if_extents, 0, new_size);
 	if (ifp->if_bytes) {
 		memcpy(ifp->if_u1.if_extents, ifp->if_u2.if_inline_ext,
@@ -4162,7 +4098,7 @@ xfs_iext_realloc_indirect(
 	} else {
 		ifp->if_u1.if_ext_irec = (xfs_ext_irec_t *)
 			kmem_realloc(ifp->if_u1.if_ext_irec,
-				new_size, size, KM_SLEEP);
+				new_size, size, KM_NOFS);
 	}
 }
 
@@ -4186,7 +4122,7 @@ xfs_iext_indirect_to_direct(
 	ASSERT(ifp->if_real_bytes == XFS_IEXT_BUFSZ);
 
 	ep = ifp->if_u1.if_ext_irec->er_extbuf;
-	kmem_free(ifp->if_u1.if_ext_irec, sizeof(xfs_ext_irec_t));
+	kmem_free(ifp->if_u1.if_ext_irec);
 	ifp->if_flags &= ~XFS_IFEXTIREC;
 	ifp->if_u1.if_extents = ep;
 	ifp->if_bytes = size;
@@ -4212,7 +4148,7 @@ xfs_iext_destroy(
 		}
 		ifp->if_flags &= ~XFS_IFEXTIREC;
 	} else if (ifp->if_real_bytes) {
-		kmem_free(ifp->if_u1.if_extents, ifp->if_real_bytes);
+		kmem_free(ifp->if_u1.if_extents);
 	} else if (ifp->if_bytes) {
 		memset(ifp->if_u2.if_inline_ext, 0, XFS_INLINE_EXTS *
 			sizeof(xfs_bmbt_rec_t));
@@ -4404,11 +4340,10 @@ xfs_iext_irec_init(
 	nextents = ifp->if_bytes / (uint)sizeof(xfs_bmbt_rec_t);
 	ASSERT(nextents <= XFS_LINEAR_EXTS);
 
-	erp = (xfs_ext_irec_t *)
-		kmem_alloc(sizeof(xfs_ext_irec_t), KM_SLEEP);
+	erp = kmem_alloc(sizeof(xfs_ext_irec_t), KM_NOFS);
 
 	if (nextents == 0) {
-		ifp->if_u1.if_extents = kmem_alloc(XFS_IEXT_BUFSZ, KM_SLEEP);
+		ifp->if_u1.if_extents = kmem_alloc(XFS_IEXT_BUFSZ, KM_NOFS);
 	} else if (!ifp->if_real_bytes) {
 		xfs_iext_inline_to_direct(ifp, XFS_IEXT_BUFSZ);
 	} else if (ifp->if_real_bytes < XFS_IEXT_BUFSZ) {
@@ -4456,7 +4391,7 @@ xfs_iext_irec_new(
 
 	/* Initialize new extent record */
 	erp = ifp->if_u1.if_ext_irec;
-	erp[erp_idx].er_extbuf = kmem_alloc(XFS_IEXT_BUFSZ, KM_SLEEP);
+	erp[erp_idx].er_extbuf = kmem_alloc(XFS_IEXT_BUFSZ, KM_NOFS);
 	ifp->if_real_bytes = nlists * XFS_IEXT_BUFSZ;
 	memset(erp[erp_idx].er_extbuf, 0, XFS_IEXT_BUFSZ);
 	erp[erp_idx].er_extcount = 0;
@@ -4483,7 +4418,7 @@ xfs_iext_irec_remove(
 	if (erp->er_extbuf) {
 		xfs_iext_irec_update_extoffs(ifp, erp_idx + 1,
 			-erp->er_extcount);
-		kmem_free(erp->er_extbuf, XFS_IEXT_BUFSZ);
+		kmem_free(erp->er_extbuf);
 	}
 	/* Compact extent records */
 	erp = ifp->if_u1.if_ext_irec;
@@ -4501,8 +4436,7 @@ xfs_iext_irec_remove(
 		xfs_iext_realloc_indirect(ifp,
 			nlists * sizeof(xfs_ext_irec_t));
 	} else {
-		kmem_free(ifp->if_u1.if_ext_irec,
-			sizeof(xfs_ext_irec_t));
+		kmem_free(ifp->if_u1.if_ext_irec);
 	}
 	ifp->if_real_bytes = nlists * XFS_IEXT_BUFSZ;
 }
@@ -4571,7 +4505,7 @@ xfs_iext_irec_compact_pages(
 			 * so er_extoffs don't get modified in
 			 * xfs_iext_irec_remove.
 			 */
-			kmem_free(erp_next->er_extbuf, XFS_IEXT_BUFSZ);
+			kmem_free(erp_next->er_extbuf);
 			erp_next->er_extbuf = NULL;
 			xfs_iext_irec_remove(ifp, erp_idx + 1);
 			nlists = ifp->if_real_bytes / XFS_IEXT_BUFSZ;
@@ -4596,40 +4530,63 @@ xfs_iext_irec_compact_full(
 	int		nlists;			/* number of irec's (ex lists) */
 
 	ASSERT(ifp->if_flags & XFS_IFEXTIREC);
+
 	nlists = ifp->if_real_bytes / XFS_IEXT_BUFSZ;
 	erp = ifp->if_u1.if_ext_irec;
 	ep = &erp->er_extbuf[erp->er_extcount];
 	erp_next = erp + 1;
 	ep_next = erp_next->er_extbuf;
+
 	while (erp_idx < nlists - 1) {
+		/*
+		 * Check how many extent records are available in this irec.
+		 * If there is none skip the whole exercise.
+		 */
 		ext_avail = XFS_LINEAR_EXTS - erp->er_extcount;
-		ext_diff = MIN(ext_avail, erp_next->er_extcount);
-		memcpy(ep, ep_next, ext_diff * sizeof(xfs_bmbt_rec_t));
-		erp->er_extcount += ext_diff;
-		erp_next->er_extcount -= ext_diff;
-		/* Remove next page */
-		if (erp_next->er_extcount == 0) {
+		if (ext_avail) {
+
 			/*
-			 * Free page before removing extent record
-			 * so er_extoffs don't get modified in
-			 * xfs_iext_irec_remove.
+			 * Copy over as many as possible extent records into
+			 * the previous page.
 			 */
-			kmem_free(erp_next->er_extbuf,
-				erp_next->er_extcount * sizeof(xfs_bmbt_rec_t));
-			erp_next->er_extbuf = NULL;
-			xfs_iext_irec_remove(ifp, erp_idx + 1);
-			erp = &ifp->if_u1.if_ext_irec[erp_idx];
-			nlists = ifp->if_real_bytes / XFS_IEXT_BUFSZ;
-		/* Update next page */
-		} else {
-			/* Move rest of page up to become next new page */
-			memmove(erp_next->er_extbuf, ep_next,
-				erp_next->er_extcount * sizeof(xfs_bmbt_rec_t));
-			ep_next = erp_next->er_extbuf;
-			memset(&ep_next[erp_next->er_extcount], 0,
-				(XFS_LINEAR_EXTS - erp_next->er_extcount) *
-				sizeof(xfs_bmbt_rec_t));
+			ext_diff = MIN(ext_avail, erp_next->er_extcount);
+			memcpy(ep, ep_next, ext_diff * sizeof(xfs_bmbt_rec_t));
+			erp->er_extcount += ext_diff;
+			erp_next->er_extcount -= ext_diff;
+
+			/*
+			 * If the next irec is empty now we can simply
+			 * remove it.
+			 */
+			if (erp_next->er_extcount == 0) {
+				/*
+				 * Free page before removing extent record
+				 * so er_extoffs don't get modified in
+				 * xfs_iext_irec_remove.
+				 */
+				kmem_free(erp_next->er_extbuf);
+				erp_next->er_extbuf = NULL;
+				xfs_iext_irec_remove(ifp, erp_idx + 1);
+				erp = &ifp->if_u1.if_ext_irec[erp_idx];
+				nlists = ifp->if_real_bytes / XFS_IEXT_BUFSZ;
+
+			/*
+			 * If the next irec is not empty move up the content
+			 * that has not been copied to the previous page to
+			 * the beggining of this one.
+			 */
+			} else {
+				memmove(erp_next->er_extbuf, &ep_next[ext_diff],
+					erp_next->er_extcount *
+					sizeof(xfs_bmbt_rec_t));
+				ep_next = erp_next->er_extbuf;
+				memset(&ep_next[erp_next->er_extcount], 0,
+					(XFS_LINEAR_EXTS -
+						erp_next->er_extcount) *
+					sizeof(xfs_bmbt_rec_t));
+			}
 		}
+
 		if (erp->er_extcount == XFS_LINEAR_EXTS) {
 			erp_idx++;
 			if (erp_idx < nlists)
diff --git a/fs/xfs/xfs_inode.h b/fs/xfs/xfs_inode.h
index 0a999fee4f03..1420c49674d7 100644
--- a/fs/xfs/xfs_inode.h
+++ b/fs/xfs/xfs_inode.h
@@ -87,8 +87,7 @@ typedef struct xfs_ifork {
  * Flags for xfs_ichgtime().
  */
 #define	XFS_ICHGTIME_MOD	0x1	/* data fork modification timestamp */
-#define	XFS_ICHGTIME_ACC	0x2	/* data fork access timestamp */
-#define	XFS_ICHGTIME_CHG	0x4	/* inode field change timestamp */
+#define	XFS_ICHGTIME_CHG	0x2	/* inode field change timestamp */
 
 /*
  * Per-fork incore inode flags.
@@ -204,7 +203,7 @@ typedef struct xfs_inode {
 	struct xfs_inode	*i_mprev;	/* ptr to prev inode */
 	struct xfs_mount	*i_mount;	/* fs mount struct ptr */
 	struct list_head	i_reclaim;	/* reclaim list */
-	bhv_vnode_t		*i_vnode;	/* vnode backpointer */
+	struct inode		*i_vnode;	/* vnode backpointer */
 	struct xfs_dquot	*i_udquot;	/* user dquot */
 	struct xfs_dquot	*i_gdquot;	/* group dquot */
 
@@ -223,7 +222,7 @@ typedef struct xfs_inode {
 	struct xfs_inode_log_item *i_itemp;	/* logging information */
 	mrlock_t		i_lock;		/* inode lock */
 	mrlock_t		i_iolock;	/* inode IO lock */
-	sema_t			i_flock;	/* inode flush lock */
+	struct completion	i_flush;	/* inode flush completion q */
 	atomic_t		i_pincount;	/* inode pin count */
 	wait_queue_head_t	i_ipin_wait;	/* inode pinning wait queue */
 	spinlock_t		i_flags_lock;	/* inode i_flags lock */
@@ -263,6 +262,18 @@ typedef struct xfs_inode {
 #define XFS_ISIZE(ip)	(((ip)->i_d.di_mode & S_IFMT) == S_IFREG) ? \
 				(ip)->i_size : (ip)->i_d.di_size;
 
+/* Convert from vfs inode to xfs inode */
+static inline struct xfs_inode *XFS_I(struct inode *inode)
+{
+	return (struct xfs_inode *)inode->i_private;
+}
+
+/* convert from xfs inode to vfs inode */
+static inline struct inode *VFS_I(struct xfs_inode *ip)
+{
+	return (struct inode *)ip->i_vnode;
+}
+
 /*
  * i_flags helper functions
  */
@@ -439,9 +450,6 @@ xfs_iflags_test_and_clear(xfs_inode_t *ip, unsigned short flags)
 #define	XFS_ITRUNC_DEFINITE	0x1
 #define	XFS_ITRUNC_MAYBE	0x2
 
-#define	XFS_ITOV(ip)		((ip)->i_vnode)
-#define	XFS_ITOV_NULL(ip)	((ip)->i_vnode)
-
 /*
  * For multiple groups support: if S_ISGID bit is set in the parent
  * directory, group of new file is set to that of the parent, and
@@ -473,11 +481,8 @@ int		xfs_ilock_nowait(xfs_inode_t *, uint);
 void		xfs_iunlock(xfs_inode_t *, uint);
 void		xfs_ilock_demote(xfs_inode_t *, uint);
 int		xfs_isilocked(xfs_inode_t *, uint);
-void		xfs_iflock(xfs_inode_t *);
-int		xfs_iflock_nowait(xfs_inode_t *);
 uint		xfs_ilock_map_shared(xfs_inode_t *);
 void		xfs_iunlock_map_shared(xfs_inode_t *, uint);
-void		xfs_ifunlock(xfs_inode_t *);
 void		xfs_ireclaim(xfs_inode_t *);
 int		xfs_finish_reclaim(xfs_inode_t *, int, int);
 int		xfs_finish_reclaim_all(struct xfs_mount *, int);
@@ -507,9 +512,6 @@ int		xfs_itruncate_start(xfs_inode_t *, uint, xfs_fsize_t);
 int		xfs_itruncate_finish(struct xfs_trans **, xfs_inode_t *,
 				     xfs_fsize_t, int, int);
 int		xfs_iunlink(struct xfs_trans *, xfs_inode_t *);
-int		xfs_igrow_start(xfs_inode_t *, xfs_fsize_t, struct cred *);
-void		xfs_igrow_finish(struct xfs_trans *, xfs_inode_t *,
-				 xfs_fsize_t, int);
 
 void		xfs_idestroy_fork(xfs_inode_t *, int);
 void		xfs_idestroy(xfs_inode_t *);
@@ -525,6 +527,7 @@ void		xfs_iflush_all(struct xfs_mount *);
 void		xfs_ichgtime(xfs_inode_t *, int);
 xfs_fsize_t	xfs_file_last_byte(xfs_inode_t *);
 void		xfs_lock_inodes(xfs_inode_t **, int, uint);
+void		xfs_lock_two_inodes(xfs_inode_t *, xfs_inode_t *, uint);
 
 void		xfs_synchronize_atime(xfs_inode_t *);
 void		xfs_mark_inode_dirty_sync(xfs_inode_t *);
@@ -573,6 +576,26 @@ extern struct kmem_zone	*xfs_ifork_zone;
 extern struct kmem_zone	*xfs_inode_zone;
 extern struct kmem_zone	*xfs_ili_zone;
 
+/*
+ * Manage the i_flush queue embedded in the inode.  This completion
+ * queue synchronizes processes attempting to flush the in-core
+ * inode back to disk.
+ */
+static inline void xfs_iflock(xfs_inode_t *ip)
+{
+	wait_for_completion(&ip->i_flush);
+}
+
+static inline int xfs_iflock_nowait(xfs_inode_t *ip)
+{
+	return try_wait_for_completion(&ip->i_flush);
+}
+
+static inline void xfs_ifunlock(xfs_inode_t *ip)
+{
+	complete(&ip->i_flush);
+}
+
 #endif	/* __KERNEL__ */
 
 #endif	/* __XFS_INODE_H__ */
diff --git a/fs/xfs/xfs_inode_item.c b/fs/xfs/xfs_inode_item.c
index 167b33f15772..97c7452e2620 100644
--- a/fs/xfs/xfs_inode_item.c
+++ b/fs/xfs/xfs_inode_item.c
@@ -686,7 +686,7 @@ xfs_inode_item_unlock(
 		ASSERT(ip->i_d.di_nextents > 0);
 		ASSERT(iip->ili_format.ilf_fields & XFS_ILOG_DEXT);
 		ASSERT(ip->i_df.if_bytes > 0);
-		kmem_free(iip->ili_extents_buf, ip->i_df.if_bytes);
+		kmem_free(iip->ili_extents_buf);
 		iip->ili_extents_buf = NULL;
 	}
 	if (iip->ili_aextents_buf != NULL) {
@@ -694,7 +694,7 @@ xfs_inode_item_unlock(
 		ASSERT(ip->i_d.di_anextents > 0);
 		ASSERT(iip->ili_format.ilf_fields & XFS_ILOG_AEXT);
 		ASSERT(ip->i_afp->if_bytes > 0);
-		kmem_free(iip->ili_aextents_buf, ip->i_afp->if_bytes);
+		kmem_free(iip->ili_aextents_buf);
 		iip->ili_aextents_buf = NULL;
 	}
 
@@ -779,11 +779,10 @@ xfs_inode_item_pushbuf(
 	ASSERT(iip->ili_push_owner == current_pid());
 
 	/*
-	 * If flushlock isn't locked anymore, chances are that the
-	 * inode flush completed and the inode was taken off the AIL.
-	 * So, just get out.
+	 * If a flush is not in progress anymore, chances are that the
+	 * inode was taken off the AIL. So, just get out.
 	 */
-	if (!issemalocked(&(ip->i_flock)) ||
+	if (completion_done(&ip->i_flush) ||
 	    ((iip->ili_item.li_flags & XFS_LI_IN_AIL) == 0)) {
 		iip->ili_pushbuf_flag = 0;
 		xfs_iunlock(ip, XFS_ILOCK_SHARED);
@@ -805,7 +804,7 @@ xfs_inode_item_pushbuf(
 			 * If not, we can flush it async.
 			 */
 			dopush = ((iip->ili_item.li_flags & XFS_LI_IN_AIL) &&
-				  issemalocked(&(ip->i_flock)));
+				  !completion_done(&ip->i_flush));
 			iip->ili_pushbuf_flag = 0;
 			xfs_iunlock(ip, XFS_ILOCK_SHARED);
 			xfs_buftrace("INODE ITEM PUSH", bp);
@@ -858,7 +857,7 @@ xfs_inode_item_push(
 	ip = iip->ili_inode;
 
 	ASSERT(xfs_isilocked(ip, XFS_ILOCK_SHARED));
-	ASSERT(issemalocked(&(ip->i_flock)));
+	ASSERT(!completion_done(&ip->i_flush));
 	/*
 	 * Since we were able to lock the inode's flush lock and
 	 * we found it on the AIL, the inode must be dirty.  This
@@ -957,8 +956,7 @@ xfs_inode_item_destroy(
 {
 #ifdef XFS_TRANS_DEBUG
 	if (ip->i_itemp->ili_root_size != 0) {
-		kmem_free(ip->i_itemp->ili_orig_root,
-			  ip->i_itemp->ili_root_size);
+		kmem_free(ip->i_itemp->ili_orig_root);
 	}
 #endif
 	kmem_zone_free(xfs_ili_zone, ip->i_itemp);
diff --git a/fs/xfs/xfs_iomap.c b/fs/xfs/xfs_iomap.c
index 7edcde691d1a..67f22b2b44b3 100644
--- a/fs/xfs/xfs_iomap.c
+++ b/fs/xfs/xfs_iomap.c
@@ -889,6 +889,16 @@ xfs_iomap_write_unwritten(
 	count_fsb = XFS_B_TO_FSB(mp, (xfs_ufsize_t)offset + count);
 	count_fsb = (xfs_filblks_t)(count_fsb - offset_fsb);
 
+	/*
+	 * Reserve enough blocks in this transaction for two complete extent
+	 * btree splits.  We may be converting the middle part of an unwritten
+	 * extent and in this case we will insert two new extents in the btree
+	 * each of which could cause a full split.
+	 *
+	 * This reservation amount will be used in the first call to
+	 * xfs_bmbt_split() to select an AG with enough space to satisfy the
+	 * rest of the operation.
+	 */
 	resblks = XFS_DIOSTRAT_SPACE_RES(mp, 0) << 1;
 
 	do {
diff --git a/fs/xfs/xfs_itable.c b/fs/xfs/xfs_itable.c
index 419de15aeb43..cf6754a3c5b3 100644
--- a/fs/xfs/xfs_itable.c
+++ b/fs/xfs/xfs_itable.c
@@ -59,7 +59,6 @@ xfs_bulkstat_one_iget(
 {
 	xfs_icdinode_t	*dic;	/* dinode core info pointer */
 	xfs_inode_t	*ip;		/* incore inode pointer */
-	bhv_vnode_t	*vp;
 	int		error;
 
 	error = xfs_iget(mp, NULL, ino,
@@ -72,7 +71,6 @@ xfs_bulkstat_one_iget(
 	ASSERT(ip != NULL);
 	ASSERT(ip->i_blkno != (xfs_daddr_t)0);
 
-	vp = XFS_ITOV(ip);
 	dic = &ip->i_d;
 
 	/* xfs_iget returns the following without needing
@@ -85,7 +83,7 @@ xfs_bulkstat_one_iget(
 	buf->bs_uid = dic->di_uid;
 	buf->bs_gid = dic->di_gid;
 	buf->bs_size = dic->di_size;
-	vn_atime_to_bstime(vp, &buf->bs_atime);
+	vn_atime_to_bstime(VFS_I(ip), &buf->bs_atime);
 	buf->bs_mtime.tv_sec = dic->di_mtime.t_sec;
 	buf->bs_mtime.tv_nsec = dic->di_mtime.t_nsec;
 	buf->bs_ctime.tv_sec = dic->di_ctime.t_sec;
@@ -257,7 +255,7 @@ xfs_bulkstat_one(
 		*ubused = error;
 
  out_free:
-	kmem_free(buf, sizeof(*buf));
+	kmem_free(buf);
 	return error;
 }
 
@@ -708,7 +706,7 @@ xfs_bulkstat(
 	/*
 	 * Done, we're either out of filesystem or space to put the data.
 	 */
-	kmem_free(irbuf, irbsize);
+	kmem_free(irbuf);
 	*ubcountp = ubelem;
 	/*
 	 * Found some inodes, return them now and return the error next time.
@@ -914,7 +912,7 @@ xfs_inumbers(
 		}
 		*lastino = XFS_AGINO_TO_INO(mp, agno, agino);
 	}
-	kmem_free(buffer, bcount * sizeof(*buffer));
+	kmem_free(buffer);
 	if (cur)
 		xfs_btree_del_cursor(cur, (error ? XFS_BTREE_ERROR :
 					   XFS_BTREE_NOERROR));
diff --git a/fs/xfs/xfs_log.c b/fs/xfs/xfs_log.c
index ad3d26ddfe31..ccba14eb9dbe 100644
--- a/fs/xfs/xfs_log.c
+++ b/fs/xfs/xfs_log.c
@@ -160,7 +160,7 @@ void
 xlog_trace_iclog(xlog_in_core_t *iclog, uint state)
 {
 	if (!iclog->ic_trace)
-		iclog->ic_trace = ktrace_alloc(256, KM_SLEEP);
+		iclog->ic_trace = ktrace_alloc(256, KM_NOFS);
 	ktrace_enter(iclog->ic_trace,
 		     (void *)((unsigned long)state),
 		     (void *)((unsigned long)current_pid()),
@@ -226,20 +226,24 @@ xlog_grant_sub_space(struct log *log, int bytes)
 static void
 xlog_grant_add_space_write(struct log *log, int bytes)
 {
-	log->l_grant_write_bytes += bytes;
-	if (log->l_grant_write_bytes > log->l_logsize) {
-		log->l_grant_write_bytes -= log->l_logsize;
+	int tmp = log->l_logsize - log->l_grant_write_bytes;
+	if (tmp > bytes)
+		log->l_grant_write_bytes += bytes;
+	else {
 		log->l_grant_write_cycle++;
+		log->l_grant_write_bytes = bytes - tmp;
 	}
 }
 
 static void
 xlog_grant_add_space_reserve(struct log *log, int bytes)
 {
-	log->l_grant_reserve_bytes += bytes;
-	if (log->l_grant_reserve_bytes > log->l_logsize) {
-		log->l_grant_reserve_bytes -= log->l_logsize;
+	int tmp = log->l_logsize - log->l_grant_reserve_bytes;
+	if (tmp > bytes)
+		log->l_grant_reserve_bytes += bytes;
+	else {
 		log->l_grant_reserve_cycle++;
+		log->l_grant_reserve_bytes = bytes - tmp;
 	}
 }
 
@@ -332,15 +336,12 @@ xfs_log_done(xfs_mount_t	*mp,
 	} else {
 		xlog_trace_loggrant(log, ticket, "xfs_log_done: (permanent)");
 		xlog_regrant_reserve_log_space(log, ticket);
-	}
-
-	/* If this ticket was a permanent reservation and we aren't
-	 * trying to release it, reset the inited flags; so next time
-	 * we write, a start record will be written out.
-	 */
-	if ((ticket->t_flags & XLOG_TIC_PERM_RESERV) &&
-	    (flags & XFS_LOG_REL_PERM_RESERV) == 0)
+		/* If this ticket was a permanent reservation and we aren't
+		 * trying to release it, reset the inited flags; so next time
+		 * we write, a start record will be written out.
+		 */
 		ticket->t_flags |= XLOG_TIC_INITED;
+	}
 
 	return lsn;
 }	/* xfs_log_done */
@@ -353,11 +354,11 @@ xfs_log_done(xfs_mount_t	*mp,
  * Asynchronous forces are implemented by setting the WANT_SYNC
  * bit in the appropriate in-core log and then returning.
  *
- * Synchronous forces are implemented with a semaphore.  All callers
- * to force a given lsn to disk will wait on a semaphore attached to the
+ * Synchronous forces are implemented with a signal variable. All callers
+ * to force a given lsn to disk will wait on a the sv attached to the
  * specific in-core log.  When given in-core log finally completes its
  * write to disk, that thread will wake up all threads waiting on the
- * semaphore.
+ * sv.
  */
 int
 _xfs_log_force(
@@ -584,12 +585,12 @@ error:
  * mp		- ubiquitous xfs mount point structure
  */
 int
-xfs_log_mount_finish(xfs_mount_t *mp, int mfsi_flags)
+xfs_log_mount_finish(xfs_mount_t *mp)
 {
 	int	error;
 
 	if (!(mp->m_flags & XFS_MOUNT_NORECOVERY))
-		error = xlog_recover_finish(mp->m_log, mfsi_flags);
+		error = xlog_recover_finish(mp->m_log);
 	else {
 		error = 0;
 		ASSERT(mp->m_flags & XFS_MOUNT_RDONLY);
@@ -703,7 +704,7 @@ xfs_log_unmount_write(xfs_mount_t *mp)
 		if (!(iclog->ic_state == XLOG_STATE_ACTIVE ||
 		      iclog->ic_state == XLOG_STATE_DIRTY)) {
 			if (!XLOG_FORCED_SHUTDOWN(log)) {
-				sv_wait(&iclog->ic_forcesema, PMEM,
+				sv_wait(&iclog->ic_force_wait, PMEM,
 					&log->l_icloglock, s);
 			} else {
 				spin_unlock(&log->l_icloglock);
@@ -744,7 +745,7 @@ xfs_log_unmount_write(xfs_mount_t *mp)
 			|| iclog->ic_state == XLOG_STATE_DIRTY
 			|| iclog->ic_state == XLOG_STATE_IOERROR) ) {
 
-				sv_wait(&iclog->ic_forcesema, PMEM,
+				sv_wait(&iclog->ic_force_wait, PMEM,
 					&log->l_icloglock, s);
 		} else {
 			spin_unlock(&log->l_icloglock);
@@ -834,7 +835,7 @@ xfs_log_move_tail(xfs_mount_t	*mp,
 				break;
 			tail_lsn = 0;
 			free_bytes -= tic->t_unit_res;
-			sv_signal(&tic->t_sema);
+			sv_signal(&tic->t_wait);
 			tic = tic->t_next;
 		} while (tic != log->l_write_headq);
 	}
@@ -855,7 +856,7 @@ xfs_log_move_tail(xfs_mount_t	*mp,
 				break;
 			tail_lsn = 0;
 			free_bytes -= need_bytes;
-			sv_signal(&tic->t_sema);
+			sv_signal(&tic->t_wait);
 			tic = tic->t_next;
 		} while (tic != log->l_reserve_headq);
 	}
@@ -1228,7 +1229,7 @@ xlog_alloc_log(xfs_mount_t	*mp,
 
 	spin_lock_init(&log->l_icloglock);
 	spin_lock_init(&log->l_grant_lock);
-	initnsema(&log->l_flushsema, 0, "ic-flush");
+	sv_init(&log->l_flush_wait, 0, "flush_wait");
 
 	/* log record size must be multiple of BBSIZE; see xlog_rec_header_t */
 	ASSERT((XFS_BUF_SIZE(bp) & BBMASK) == 0);
@@ -1281,8 +1282,8 @@ xlog_alloc_log(xfs_mount_t	*mp,
 
 		ASSERT(XFS_BUF_ISBUSY(iclog->ic_bp));
 		ASSERT(XFS_BUF_VALUSEMA(iclog->ic_bp) <= 0);
-		sv_init(&iclog->ic_forcesema, SV_DEFAULT, "iclog-force");
-		sv_init(&iclog->ic_writesema, SV_DEFAULT, "iclog-write");
+		sv_init(&iclog->ic_force_wait, SV_DEFAULT, "iclog-force");
+		sv_init(&iclog->ic_write_wait, SV_DEFAULT, "iclog-write");
 
 		iclogp = &iclog->ic_next;
 	}
@@ -1561,8 +1562,8 @@ xlog_dealloc_log(xlog_t *log)
 
 	iclog = log->l_iclog;
 	for (i=0; i<log->l_iclog_bufs; i++) {
-		sv_destroy(&iclog->ic_forcesema);
-		sv_destroy(&iclog->ic_writesema);
+		sv_destroy(&iclog->ic_force_wait);
+		sv_destroy(&iclog->ic_write_wait);
 		xfs_buf_free(iclog->ic_bp);
 #ifdef XFS_LOG_TRACE
 		if (iclog->ic_trace != NULL) {
@@ -1570,10 +1571,9 @@ xlog_dealloc_log(xlog_t *log)
 		}
 #endif
 		next_iclog = iclog->ic_next;
-		kmem_free(iclog, sizeof(xlog_in_core_t));
+		kmem_free(iclog);
 		iclog = next_iclog;
 	}
-	freesema(&log->l_flushsema);
 	spinlock_destroy(&log->l_icloglock);
 	spinlock_destroy(&log->l_grant_lock);
 
@@ -1587,7 +1587,7 @@ xlog_dealloc_log(xlog_t *log)
 	}
 #endif
 	log->l_mp->m_log = NULL;
-	kmem_free(log, sizeof(xlog_t));
+	kmem_free(log);
 }	/* xlog_dealloc_log */
 
 /*
@@ -1973,7 +1973,7 @@ xlog_write(xfs_mount_t *	mp,
 /* Clean iclogs starting from the head.  This ordering must be
  * maintained, so an iclog doesn't become ACTIVE beyond one that
  * is SYNCING.  This is also required to maintain the notion that we use
- * a counting semaphore to hold off would be writers to the log when every
+ * a ordered wait queue to hold off would be writers to the log when every
  * iclog is trying to sync to disk.
  *
  * State Change: DIRTY -> ACTIVE
@@ -2097,6 +2097,7 @@ xlog_state_do_callback(
 	int		   funcdidcallbacks; /* flag: function did callbacks */
 	int		   repeats;	/* for issuing console warnings if
 					 * looping too many times */
+	int		   wake = 0;
 
 	spin_lock(&log->l_icloglock);
 	first_iclog = iclog = log->l_iclog;
@@ -2236,7 +2237,7 @@ xlog_state_do_callback(
 			xlog_state_clean_log(log);
 
 			/* wake up threads waiting in xfs_log_force() */
-			sv_broadcast(&iclog->ic_forcesema);
+			sv_broadcast(&iclog->ic_force_wait);
 
 			iclog = iclog->ic_next;
 		} while (first_iclog != iclog);
@@ -2278,15 +2279,13 @@ xlog_state_do_callback(
 	}
 #endif
 
-	flushcnt = 0;
-	if (log->l_iclog->ic_state & (XLOG_STATE_ACTIVE|XLOG_STATE_IOERROR)) {
-		flushcnt = log->l_flushcnt;
-		log->l_flushcnt = 0;
-	}
+	if (log->l_iclog->ic_state & (XLOG_STATE_ACTIVE|XLOG_STATE_IOERROR))
+		wake = 1;
 	spin_unlock(&log->l_icloglock);
-	while (flushcnt--)
-		vsema(&log->l_flushsema);
-}	/* xlog_state_do_callback */
+
+	if (wake)
+		sv_broadcast(&log->l_flush_wait);
+}
 
 
 /*
@@ -2300,8 +2299,7 @@ xlog_state_do_callback(
  * the second completion goes through.
  *
  * Callbacks could take time, so they are done outside the scope of the
- * global state machine log lock.  Assume that the calls to cvsema won't
- * take a long time.  At least we know it won't sleep.
+ * global state machine log lock.
  */
 STATIC void
 xlog_state_done_syncing(
@@ -2337,7 +2335,7 @@ xlog_state_done_syncing(
 	 * iclog buffer, we wake them all, one will get to do the
 	 * I/O, the others get to wait for the result.
 	 */
-	sv_broadcast(&iclog->ic_writesema);
+	sv_broadcast(&iclog->ic_write_wait);
 	spin_unlock(&log->l_icloglock);
 	xlog_state_do_callback(log, aborted, iclog);	/* also cleans log */
 }	/* xlog_state_done_syncing */
@@ -2345,11 +2343,9 @@ xlog_state_done_syncing(
 
 /*
  * If the head of the in-core log ring is not (ACTIVE or DIRTY), then we must
- * sleep.  The flush semaphore is set to the number of in-core buffers and
- * decremented around disk syncing.  Therefore, if all buffers are syncing,
- * this semaphore will cause new writes to sleep until a sync completes.
- * Otherwise, this code just does p() followed by v().  This approximates
- * a sleep/wakeup except we can't race.
+ * sleep.  We wait on the flush queue on the head iclog as that should be
+ * the first iclog to complete flushing. Hence if all iclogs are syncing,
+ * we will wait here and all new writes will sleep until a sync completes.
  *
  * The in-core logs are used in a circular fashion. They are not used
  * out-of-order even when an iclog past the head is free.
@@ -2384,16 +2380,15 @@ restart:
 	}
 
 	iclog = log->l_iclog;
-	if (! (iclog->ic_state == XLOG_STATE_ACTIVE)) {
-		log->l_flushcnt++;
-		spin_unlock(&log->l_icloglock);
+	if (iclog->ic_state != XLOG_STATE_ACTIVE) {
 		xlog_trace_iclog(iclog, XLOG_TRACE_SLEEP_FLUSH);
 		XFS_STATS_INC(xs_log_noiclogs);
-		/* Ensure that log writes happen */
-		psema(&log->l_flushsema, PINOD);
+
+		/* Wait for log writes to have flushed */
+		sv_wait(&log->l_flush_wait, 0, &log->l_icloglock, 0);
 		goto restart;
 	}
-	ASSERT(iclog->ic_state == XLOG_STATE_ACTIVE);
+
 	head = &iclog->ic_header;
 
 	atomic_inc(&iclog->ic_refcnt);	/* prevents sync */
@@ -2507,7 +2502,7 @@ xlog_grant_log_space(xlog_t	   *log,
 			goto error_return;
 
 		XFS_STATS_INC(xs_sleep_logspace);
-		sv_wait(&tic->t_sema, PINOD|PLTWAIT, &log->l_grant_lock, s);
+		sv_wait(&tic->t_wait, PINOD|PLTWAIT, &log->l_grant_lock, s);
 		/*
 		 * If we got an error, and the filesystem is shutting down,
 		 * we'll catch it down below. So just continue...
@@ -2533,7 +2528,7 @@ redo:
 		xlog_trace_loggrant(log, tic,
 				    "xlog_grant_log_space: sleep 2");
 		XFS_STATS_INC(xs_sleep_logspace);
-		sv_wait(&tic->t_sema, PINOD|PLTWAIT, &log->l_grant_lock, s);
+		sv_wait(&tic->t_wait, PINOD|PLTWAIT, &log->l_grant_lock, s);
 
 		if (XLOG_FORCED_SHUTDOWN(log)) {
 			spin_lock(&log->l_grant_lock);
@@ -2632,7 +2627,7 @@ xlog_regrant_write_log_space(xlog_t	   *log,
 			if (free_bytes < ntic->t_unit_res)
 				break;
 			free_bytes -= ntic->t_unit_res;
-			sv_signal(&ntic->t_sema);
+			sv_signal(&ntic->t_wait);
 			ntic = ntic->t_next;
 		} while (ntic != log->l_write_headq);
 
@@ -2643,7 +2638,7 @@ xlog_regrant_write_log_space(xlog_t	   *log,
 			xlog_trace_loggrant(log, tic,
 				    "xlog_regrant_write_log_space: sleep 1");
 			XFS_STATS_INC(xs_sleep_logspace);
-			sv_wait(&tic->t_sema, PINOD|PLTWAIT,
+			sv_wait(&tic->t_wait, PINOD|PLTWAIT,
 				&log->l_grant_lock, s);
 
 			/* If we're shutting down, this tic is already
@@ -2672,7 +2667,7 @@ redo:
 		if ((tic->t_flags & XLOG_TIC_IN_Q) == 0)
 			xlog_ins_ticketq(&log->l_write_headq, tic);
 		XFS_STATS_INC(xs_sleep_logspace);
-		sv_wait(&tic->t_sema, PINOD|PLTWAIT, &log->l_grant_lock, s);
+		sv_wait(&tic->t_wait, PINOD|PLTWAIT, &log->l_grant_lock, s);
 
 		/* If we're shutting down, this tic is already off the queue */
 		if (XLOG_FORCED_SHUTDOWN(log)) {
@@ -2915,7 +2910,7 @@ xlog_state_switch_iclogs(xlog_t		*log,
  *	2. the current iclog is drity, and the previous iclog is in the
  *		active or dirty state.
  *
- * We may sleep (call psema) if:
+ * We may sleep if:
  *
  *	1. the current iclog is not in the active nor dirty state.
  *	2. the current iclog dirty, and the previous iclog is not in the
@@ -3012,7 +3007,7 @@ maybe_sleep:
 			return XFS_ERROR(EIO);
 		}
 		XFS_STATS_INC(xs_log_force_sleep);
-		sv_wait(&iclog->ic_forcesema, PINOD, &log->l_icloglock, s);
+		sv_wait(&iclog->ic_force_wait, PINOD, &log->l_icloglock, s);
 		/*
 		 * No need to grab the log lock here since we're
 		 * only deciding whether or not to return EIO
@@ -3095,7 +3090,7 @@ try_again:
 						 XLOG_STATE_SYNCING))) {
 			ASSERT(!(iclog->ic_state & XLOG_STATE_IOERROR));
 			XFS_STATS_INC(xs_log_force_sleep);
-			sv_wait(&iclog->ic_prev->ic_writesema, PSWP,
+			sv_wait(&iclog->ic_prev->ic_write_wait, PSWP,
 				&log->l_icloglock, s);
 			*log_flushed = 1;
 			already_slept = 1;
@@ -3115,7 +3110,7 @@ try_again:
 	    !(iclog->ic_state & (XLOG_STATE_ACTIVE | XLOG_STATE_DIRTY))) {
 
 		/*
-		 * Don't wait on the forcesema if we know that we've
+		 * Don't wait on completion if we know that we've
 		 * gotten a log write error.
 		 */
 		if (iclog->ic_state & XLOG_STATE_IOERROR) {
@@ -3123,7 +3118,7 @@ try_again:
 			return XFS_ERROR(EIO);
 		}
 		XFS_STATS_INC(xs_log_force_sleep);
-		sv_wait(&iclog->ic_forcesema, PSWP, &log->l_icloglock, s);
+		sv_wait(&iclog->ic_force_wait, PSWP, &log->l_icloglock, s);
 		/*
 		 * No need to grab the log lock here since we're
 		 * only deciding whether or not to return EIO
@@ -3179,7 +3174,7 @@ STATIC void
 xlog_ticket_put(xlog_t		*log,
 		xlog_ticket_t	*ticket)
 {
-	sv_destroy(&ticket->t_sema);
+	sv_destroy(&ticket->t_wait);
 	kmem_zone_free(xfs_log_ticket_zone, ticket);
 }	/* xlog_ticket_put */
 
@@ -3269,7 +3264,7 @@ xlog_ticket_get(xlog_t		*log,
 	tic->t_trans_type	= 0;
 	if (xflags & XFS_LOG_PERM_RESERV)
 		tic->t_flags |= XLOG_TIC_PERM_RESERV;
-	sv_init(&(tic->t_sema), SV_DEFAULT, "logtick");
+	sv_init(&(tic->t_wait), SV_DEFAULT, "logtick");
 
 	xlog_tic_reset_res(tic);
 
@@ -3556,14 +3551,14 @@ xfs_log_force_umount(
 	 */
 	if ((tic = log->l_reserve_headq)) {
 		do {
-			sv_signal(&tic->t_sema);
+			sv_signal(&tic->t_wait);
 			tic = tic->t_next;
 		} while (tic != log->l_reserve_headq);
 	}
 
 	if ((tic = log->l_write_headq)) {
 		do {
-			sv_signal(&tic->t_sema);
+			sv_signal(&tic->t_wait);
 			tic = tic->t_next;
 		} while (tic != log->l_write_headq);
 	}
diff --git a/fs/xfs/xfs_log.h b/fs/xfs/xfs_log.h
index d1d678ecb63e..d47b91f10822 100644
--- a/fs/xfs/xfs_log.h
+++ b/fs/xfs/xfs_log.h
@@ -149,7 +149,7 @@ int	  xfs_log_mount(struct xfs_mount	*mp,
 			struct xfs_buftarg	*log_target,
 			xfs_daddr_t		start_block,
 			int		 	num_bblocks);
-int	  xfs_log_mount_finish(struct xfs_mount *mp, int);
+int	  xfs_log_mount_finish(struct xfs_mount *mp);
 void	  xfs_log_move_tail(struct xfs_mount	*mp,
 			    xfs_lsn_t		tail_lsn);
 int	  xfs_log_notify(struct xfs_mount	*mp,
diff --git a/fs/xfs/xfs_log_priv.h b/fs/xfs/xfs_log_priv.h
index 8952a392b5f3..c8a5b22ee3e3 100644
--- a/fs/xfs/xfs_log_priv.h
+++ b/fs/xfs/xfs_log_priv.h
@@ -241,7 +241,7 @@ typedef struct xlog_res {
 } xlog_res_t;
 
 typedef struct xlog_ticket {
-	sv_t		   t_sema;	 /* sleep on this semaphore      : 20 */
+	sv_t		   t_wait;	 /* ticket wait queue            : 20 */
 	struct xlog_ticket *t_next;	 /*			         :4|8 */
 	struct xlog_ticket *t_prev;	 /*				 :4|8 */
 	xlog_tid_t	   t_tid;	 /* transaction identifier	 : 4  */
@@ -314,7 +314,7 @@ typedef struct xlog_rec_ext_header {
  *	xlog_rec_header_t into the reserved space.
  * - ic_data follows, so a write to disk can start at the beginning of
  *	the iclog.
- * - ic_forcesema is used to implement synchronous forcing of the iclog to disk.
+ * - ic_forcewait is used to implement synchronous forcing of the iclog to disk.
  * - ic_next is the pointer to the next iclog in the ring.
  * - ic_bp is a pointer to the buffer used to write this incore log to disk.
  * - ic_log is a pointer back to the global log structure.
@@ -339,8 +339,8 @@ typedef struct xlog_rec_ext_header {
  * and move everything else out to subsequent cachelines.
  */
 typedef struct xlog_iclog_fields {
-	sv_t			ic_forcesema;
-	sv_t			ic_writesema;
+	sv_t			ic_force_wait;
+	sv_t			ic_write_wait;
 	struct xlog_in_core	*ic_next;
 	struct xlog_in_core	*ic_prev;
 	struct xfs_buf		*ic_bp;
@@ -377,8 +377,8 @@ typedef struct xlog_in_core {
 /*
  * Defines to save our code from this glop.
  */
-#define	ic_forcesema	hic_fields.ic_forcesema
-#define ic_writesema	hic_fields.ic_writesema
+#define	ic_force_wait	hic_fields.ic_force_wait
+#define ic_write_wait	hic_fields.ic_write_wait
 #define	ic_next		hic_fields.ic_next
 #define	ic_prev		hic_fields.ic_prev
 #define	ic_bp		hic_fields.ic_bp
@@ -423,10 +423,8 @@ typedef struct log {
 	int			l_logBBsize;    /* size of log in BB chunks */
 
 	/* The following block of fields are changed while holding icloglock */
-	sema_t			l_flushsema ____cacheline_aligned_in_smp;
-						/* iclog flushing semaphore */
-	int			l_flushcnt;	/* # of procs waiting on this
-						 * sema */
+	sv_t			l_flush_wait ____cacheline_aligned_in_smp;
+						/* waiting for iclog flush */
 	int			l_covered_state;/* state of "covering disk
 						 * log entries" */
 	xlog_in_core_t		*l_iclog;       /* head log queue	*/
@@ -470,7 +468,7 @@ extern int	 xlog_find_tail(xlog_t	*log,
 				xfs_daddr_t *head_blk,
 				xfs_daddr_t *tail_blk);
 extern int	 xlog_recover(xlog_t *log);
-extern int	 xlog_recover_finish(xlog_t *log, int mfsi_flags);
+extern int	 xlog_recover_finish(xlog_t *log);
 extern void	 xlog_pack_data(xlog_t *log, xlog_in_core_t *iclog, int);
 extern void	 xlog_recover_process_iunlinks(xlog_t *log);
 
diff --git a/fs/xfs/xfs_log_recover.c b/fs/xfs/xfs_log_recover.c
index e65ab4af0955..82d46ce69d5f 100644
--- a/fs/xfs/xfs_log_recover.c
+++ b/fs/xfs/xfs_log_recover.c
@@ -1715,8 +1715,7 @@ xlog_check_buffer_cancelled(
 					} else {
 						prevp->bc_next = bcp->bc_next;
 					}
-					kmem_free(bcp,
-						  sizeof(xfs_buf_cancel_t));
+					kmem_free(bcp);
 				}
 			}
 			return 1;
@@ -2519,7 +2518,7 @@ write_inode_buffer:
 
 error:
 	if (need_free)
-		kmem_free(in_f, sizeof(*in_f));
+		kmem_free(in_f);
 	return XFS_ERROR(error);
 }
 
@@ -2830,16 +2829,14 @@ xlog_recover_free_trans(
 		item = item->ri_next;
 		 /* Free the regions in the item. */
 		for (i = 0; i < free_item->ri_cnt; i++) {
-			kmem_free(free_item->ri_buf[i].i_addr,
-				  free_item->ri_buf[i].i_len);
+			kmem_free(free_item->ri_buf[i].i_addr);
 		}
 		/* Free the item itself */
-		kmem_free(free_item->ri_buf,
-			  (free_item->ri_total * sizeof(xfs_log_iovec_t)));
-		kmem_free(free_item, sizeof(xlog_recover_item_t));
+		kmem_free(free_item->ri_buf);
+		kmem_free(free_item);
 	} while (first_item != item);
 	/* Free the transaction recover structure */
-	kmem_free(trans, sizeof(xlog_recover_t));
+	kmem_free(trans);
 }
 
 STATIC int
@@ -3786,8 +3783,7 @@ xlog_do_log_recovery(
 	error = xlog_do_recovery_pass(log, head_blk, tail_blk,
 				      XLOG_RECOVER_PASS1);
 	if (error != 0) {
-		kmem_free(log->l_buf_cancel_table,
-			  XLOG_BC_TABLE_SIZE * sizeof(xfs_buf_cancel_t*));
+		kmem_free(log->l_buf_cancel_table);
 		log->l_buf_cancel_table = NULL;
 		return error;
 	}
@@ -3806,8 +3802,7 @@ xlog_do_log_recovery(
 	}
 #endif	/* DEBUG */
 
-	kmem_free(log->l_buf_cancel_table,
-		  XLOG_BC_TABLE_SIZE * sizeof(xfs_buf_cancel_t*));
+	kmem_free(log->l_buf_cancel_table);
 	log->l_buf_cancel_table = NULL;
 
 	return error;
@@ -3945,8 +3940,7 @@ xlog_recover(
  */
 int
 xlog_recover_finish(
-	xlog_t		*log,
-	int		mfsi_flags)
+	xlog_t		*log)
 {
 	/*
 	 * Now we're ready to do the transactions needed for the
@@ -3974,9 +3968,7 @@ xlog_recover_finish(
 		xfs_log_force(log->l_mp, (xfs_lsn_t)0,
 			      (XFS_LOG_FORCE | XFS_LOG_SYNC));
 
-		if ( (mfsi_flags & XFS_MFSI_NOUNLINK) == 0 ) {
-			xlog_recover_process_iunlinks(log);
-		}
+		xlog_recover_process_iunlinks(log);
 
 		xlog_recover_check_summary(log);
 
diff --git a/fs/xfs/xfs_mount.c b/fs/xfs/xfs_mount.c
index da3988453b71..a4503f5e9497 100644
--- a/fs/xfs/xfs_mount.c
+++ b/fs/xfs/xfs_mount.c
@@ -47,12 +47,10 @@
 
 STATIC int	xfs_mount_log_sb(xfs_mount_t *, __int64_t);
 STATIC int	xfs_uuid_mount(xfs_mount_t *);
-STATIC void	xfs_uuid_unmount(xfs_mount_t *mp);
 STATIC void	xfs_unmountfs_wait(xfs_mount_t *);
 
 
 #ifdef HAVE_PERCPU_SB
-STATIC void	xfs_icsb_destroy_counters(xfs_mount_t *);
 STATIC void	xfs_icsb_balance_counter(xfs_mount_t *, xfs_sb_field_t,
 						int);
 STATIC void	xfs_icsb_balance_counter_locked(xfs_mount_t *, xfs_sb_field_t,
@@ -63,7 +61,6 @@ STATIC void	xfs_icsb_disable_counter(xfs_mount_t *, xfs_sb_field_t);
 
 #else
 
-#define xfs_icsb_destroy_counters(mp)			do { } while (0)
 #define xfs_icsb_balance_counter(mp, a, b)		do { } while (0)
 #define xfs_icsb_balance_counter_locked(mp, a, b)	do { } while (0)
 #define xfs_icsb_modify_counters(mp, a, b, c)		do { } while (0)
@@ -126,34 +123,12 @@ static const struct {
 };
 
 /*
- * Return a pointer to an initialized xfs_mount structure.
- */
-xfs_mount_t *
-xfs_mount_init(void)
-{
-	xfs_mount_t *mp;
-
-	mp = kmem_zalloc(sizeof(xfs_mount_t), KM_SLEEP);
-
-	if (xfs_icsb_init_counters(mp)) {
-		mp->m_flags |= XFS_MOUNT_NO_PERCPU_SB;
-	}
-
-	spin_lock_init(&mp->m_sb_lock);
-	mutex_init(&mp->m_ilock);
-	mutex_init(&mp->m_growlock);
-	atomic_set(&mp->m_active_trans, 0);
-
-	return mp;
-}
-
-/*
  * Free up the resources associated with a mount structure.  Assume that
  * the structure was initially zeroed, so we can tell which fields got
  * initialized.
  */
-void
-xfs_mount_free(
+STATIC void
+xfs_free_perag(
 	xfs_mount_t	*mp)
 {
 	if (mp->m_perag) {
@@ -161,28 +136,9 @@ xfs_mount_free(
 
 		for (agno = 0; agno < mp->m_maxagi; agno++)
 			if (mp->m_perag[agno].pagb_list)
-				kmem_free(mp->m_perag[agno].pagb_list,
-						sizeof(xfs_perag_busy_t) *
-							XFS_PAGB_NUM_SLOTS);
-		kmem_free(mp->m_perag,
-			  sizeof(xfs_perag_t) * mp->m_sb.sb_agcount);
+				kmem_free(mp->m_perag[agno].pagb_list);
+		kmem_free(mp->m_perag);
 	}
-
-	spinlock_destroy(&mp->m_ail_lock);
-	spinlock_destroy(&mp->m_sb_lock);
-	mutex_destroy(&mp->m_ilock);
-	mutex_destroy(&mp->m_growlock);
-	if (mp->m_quotainfo)
-		XFS_QM_DONE(mp);
-
-	if (mp->m_fsname != NULL)
-		kmem_free(mp->m_fsname, mp->m_fsname_len);
-	if (mp->m_rtname != NULL)
-		kmem_free(mp->m_rtname, strlen(mp->m_rtname) + 1);
-	if (mp->m_logname != NULL)
-		kmem_free(mp->m_logname, strlen(mp->m_logname) + 1);
-
-	xfs_icsb_destroy_counters(mp);
 }
 
 /*
@@ -288,6 +244,19 @@ xfs_mount_validate_sb(
 		return XFS_ERROR(EFSCORRUPTED);
 	}
 
+	/*
+	 * Until this is fixed only page-sized or smaller data blocks work.
+	 */
+	if (unlikely(sbp->sb_blocksize > PAGE_SIZE)) {
+		xfs_fs_mount_cmn_err(flags,
+			"file system with blocksize %d bytes",
+			sbp->sb_blocksize);
+		xfs_fs_mount_cmn_err(flags,
+			"only pagesize (%ld) or less will currently work.",
+			PAGE_SIZE);
+		return XFS_ERROR(ENOSYS);
+	}
+
 	if (xfs_sb_validate_fsb_count(sbp, sbp->sb_dblocks) ||
 	    xfs_sb_validate_fsb_count(sbp, sbp->sb_rblocks)) {
 		xfs_fs_mount_cmn_err(flags,
@@ -309,19 +278,6 @@ xfs_mount_validate_sb(
 		return XFS_ERROR(ENOSYS);
 	}
 
-	/*
-	 * Until this is fixed only page-sized or smaller data blocks work.
-	 */
-	if (unlikely(sbp->sb_blocksize > PAGE_SIZE)) {
-		xfs_fs_mount_cmn_err(flags,
-			"file system with blocksize %d bytes",
-			sbp->sb_blocksize);
-		xfs_fs_mount_cmn_err(flags,
-			"only pagesize (%ld) or less will currently work.",
-			PAGE_SIZE);
-		return XFS_ERROR(ENOSYS);
-	}
-
 	return 0;
 }
 
@@ -734,11 +690,11 @@ xfs_initialize_perag_data(xfs_mount_t *mp, xfs_agnumber_t agcount)
  * Update alignment values based on mount options and sb values
  */
 STATIC int
-xfs_update_alignment(xfs_mount_t *mp, int mfsi_flags, __uint64_t *update_flags)
+xfs_update_alignment(xfs_mount_t *mp, __uint64_t *update_flags)
 {
 	xfs_sb_t	*sbp = &(mp->m_sb);
 
-	if (mp->m_dalign && !(mfsi_flags & XFS_MFSI_SECOND)) {
+	if (mp->m_dalign) {
 		/*
 		 * If stripe unit and stripe width are not multiples
 		 * of the fs blocksize turn off alignment.
@@ -894,7 +850,7 @@ xfs_set_inoalignment(xfs_mount_t *mp)
  * Check that the data (and log if separate) are an ok size.
  */
 STATIC int
-xfs_check_sizes(xfs_mount_t *mp, int mfsi_flags)
+xfs_check_sizes(xfs_mount_t *mp)
 {
 	xfs_buf_t	*bp;
 	xfs_daddr_t	d;
@@ -917,8 +873,7 @@ xfs_check_sizes(xfs_mount_t *mp, int mfsi_flags)
 		return error;
 	}
 
-	if (((mfsi_flags & XFS_MFSI_CLIENT) == 0) &&
-	    mp->m_logdev_targp != mp->m_ddev_targp) {
+	if (mp->m_logdev_targp != mp->m_ddev_targp) {
 		d = (xfs_daddr_t)XFS_FSB_TO_BB(mp, mp->m_sb.sb_logblocks);
 		if (XFS_BB_TO_FSB(mp, d) != mp->m_sb.sb_logblocks) {
 			cmn_err(CE_WARN, "XFS: size check 3 failed");
@@ -953,15 +908,13 @@ xfs_check_sizes(xfs_mount_t *mp, int mfsi_flags)
  */
 int
 xfs_mountfs(
-	xfs_mount_t	*mp,
-	int		mfsi_flags)
+	xfs_mount_t	*mp)
 {
 	xfs_sb_t	*sbp = &(mp->m_sb);
 	xfs_inode_t	*rip;
 	__uint64_t	resblks;
 	__int64_t	update_flags = 0LL;
 	uint		quotamount, quotaflags;
-	int		agno;
 	int		uuid_mounted = 0;
 	int		error = 0;
 
@@ -994,9 +947,19 @@ xfs_mountfs(
 		 * Re-check for ATTR2 in case it was found in bad_features2
 		 * slot.
 		 */
-		if (xfs_sb_version_hasattr2(&mp->m_sb))
+		if (xfs_sb_version_hasattr2(&mp->m_sb) &&
+		   !(mp->m_flags & XFS_MOUNT_NOATTR2))
 			mp->m_flags |= XFS_MOUNT_ATTR2;
+	}
+
+	if (xfs_sb_version_hasattr2(&mp->m_sb) &&
+	   (mp->m_flags & XFS_MOUNT_NOATTR2)) {
+		xfs_sb_version_removeattr2(&mp->m_sb);
+		update_flags |= XFS_SB_FEATURES2;
 
+		/* update sb_versionnum for the clearing of the morebits */
+		if (!sbp->sb_features2)
+			update_flags |= XFS_SB_VERSIONNUM;
 	}
 
 	/*
@@ -1005,7 +968,7 @@ xfs_mountfs(
 	 * allocator alignment is within an ag, therefore ag has
 	 * to be aligned at stripe boundary.
 	 */
-	error = xfs_update_alignment(mp, mfsi_flags, &update_flags);
+	error = xfs_update_alignment(mp, &update_flags);
 	if (error)
 		goto error1;
 
@@ -1024,8 +987,7 @@ xfs_mountfs(
 	 * since a single partition filesystem is identical to a single
 	 * partition volume/filesystem.
 	 */
-	if ((mfsi_flags & XFS_MFSI_SECOND) == 0 &&
-	    (mp->m_flags & XFS_MOUNT_NOUUID) == 0) {
+	if ((mp->m_flags & XFS_MOUNT_NOUUID) == 0) {
 		if (xfs_uuid_mount(mp)) {
 			error = XFS_ERROR(EINVAL);
 			goto error1;
@@ -1053,7 +1015,7 @@ xfs_mountfs(
 	/*
 	 * Check that the data (and log if separate) are an ok size.
 	 */
-	error = xfs_check_sizes(mp, mfsi_flags);
+	error = xfs_check_sizes(mp);
 	if (error)
 		goto error1;
 
@@ -1067,13 +1029,6 @@ xfs_mountfs(
 	}
 
 	/*
-	 * For client case we are done now
-	 */
-	if (mfsi_flags & XFS_MFSI_CLIENT) {
-		return 0;
-	}
-
-	/*
 	 *  Copies the low order bits of the timestamp and the randomly
 	 *  set "sequence" number out of a UUID.
 	 */
@@ -1097,8 +1052,10 @@ xfs_mountfs(
 	 * Allocate and initialize the per-ag data.
 	 */
 	init_rwsem(&mp->m_peraglock);
-	mp->m_perag =
-		kmem_zalloc(sbp->sb_agcount * sizeof(xfs_perag_t), KM_SLEEP);
+	mp->m_perag = kmem_zalloc(sbp->sb_agcount * sizeof(xfs_perag_t),
+				  KM_MAYFAIL);
+	if (!mp->m_perag)
+		goto error1;
 
 	mp->m_maxagi = xfs_initialize_perag(mp, sbp->sb_agcount);
 
@@ -1210,7 +1167,7 @@ xfs_mountfs(
 	 * delayed until after the root and real-time bitmap inodes
 	 * were consistently read in.
 	 */
-	error = xfs_log_mount_finish(mp, mfsi_flags);
+	error = xfs_log_mount_finish(mp);
 	if (error) {
 		cmn_err(CE_WARN, "XFS: log mount finish failed");
 		goto error4;
@@ -1219,7 +1176,7 @@ xfs_mountfs(
 	/*
 	 * Complete the quota initialisation, post-log-replay component.
 	 */
-	error = XFS_QM_MOUNT(mp, quotamount, quotaflags, mfsi_flags);
+	error = XFS_QM_MOUNT(mp, quotamount, quotaflags);
 	if (error)
 		goto error4;
 
@@ -1253,31 +1210,25 @@ xfs_mountfs(
  error3:
 	xfs_log_unmount_dealloc(mp);
  error2:
-	for (agno = 0; agno < sbp->sb_agcount; agno++)
-		if (mp->m_perag[agno].pagb_list)
-			kmem_free(mp->m_perag[agno].pagb_list,
-			  sizeof(xfs_perag_busy_t) * XFS_PAGB_NUM_SLOTS);
-	kmem_free(mp->m_perag, sbp->sb_agcount * sizeof(xfs_perag_t));
-	mp->m_perag = NULL;
-	/* FALLTHROUGH */
+	xfs_free_perag(mp);
  error1:
 	if (uuid_mounted)
-		xfs_uuid_unmount(mp);
-	xfs_freesb(mp);
+		uuid_table_remove(&mp->m_sb.sb_uuid);
 	return error;
 }
 
 /*
- * xfs_unmountfs
- *
  * This flushes out the inodes,dquots and the superblock, unmounts the
  * log and makes sure that incore structures are freed.
  */
-int
-xfs_unmountfs(xfs_mount_t *mp, struct cred *cr)
+void
+xfs_unmountfs(
+	struct xfs_mount	*mp)
 {
-	__uint64_t	resblks;
-	int		error = 0;
+	__uint64_t		resblks;
+	int			error;
+
+	IRELE(mp->m_rootip);
 
 	/*
 	 * We can potentially deadlock here if we have an inode cluster
@@ -1334,32 +1285,20 @@ xfs_unmountfs(xfs_mount_t *mp, struct cred *cr)
 	xfs_unmountfs_wait(mp); 		/* wait for async bufs */
 	xfs_log_unmount(mp);			/* Done! No more fs ops. */
 
-	xfs_freesb(mp);
-
 	/*
 	 * All inodes from this mount point should be freed.
 	 */
 	ASSERT(mp->m_inodes == NULL);
 
-	xfs_unmountfs_close(mp, cr);
 	if ((mp->m_flags & XFS_MOUNT_NOUUID) == 0)
-		xfs_uuid_unmount(mp);
+		uuid_table_remove(&mp->m_sb.sb_uuid);
 
-#if defined(DEBUG) || defined(INDUCE_IO_ERROR)
+#if defined(DEBUG)
 	xfs_errortag_clearall(mp, 0);
 #endif
-	xfs_mount_free(mp);
-	return 0;
-}
-
-void
-xfs_unmountfs_close(xfs_mount_t *mp, struct cred *cr)
-{
-	if (mp->m_logdev_targp && mp->m_logdev_targp != mp->m_ddev_targp)
-		xfs_free_buftarg(mp->m_logdev_targp, 1);
-	if (mp->m_rtdev_targp)
-		xfs_free_buftarg(mp->m_rtdev_targp, 1);
-	xfs_free_buftarg(mp->m_ddev_targp, 0);
+	xfs_free_perag(mp);
+	if (mp->m_quotainfo)
+		XFS_QM_DONE(mp);
 }
 
 STATIC void
@@ -1905,16 +1844,6 @@ xfs_uuid_mount(
 }
 
 /*
- * Remove filesystem from the UUID table.
- */
-STATIC void
-xfs_uuid_unmount(
-	xfs_mount_t	*mp)
-{
-	uuid_table_remove(&mp->m_sb.sb_uuid);
-}
-
-/*
  * Used to log changes to the superblock unit and width fields which could
  * be altered by the mount options, as well as any potential sb_features2
  * fixup. Only the first superblock is updated.
@@ -1928,7 +1857,8 @@ xfs_mount_log_sb(
 	int		error;
 
 	ASSERT(fields & (XFS_SB_UNIT | XFS_SB_WIDTH | XFS_SB_UUID |
-			 XFS_SB_FEATURES2 | XFS_SB_BAD_FEATURES2));
+			 XFS_SB_FEATURES2 | XFS_SB_BAD_FEATURES2 |
+			 XFS_SB_VERSIONNUM));
 
 	tp = xfs_trans_alloc(mp, XFS_TRANS_SB_UNIT);
 	error = xfs_trans_reserve(tp, 0, mp->m_sb.sb_sectsize + 128, 0, 0,
@@ -2109,7 +2039,7 @@ xfs_icsb_reinit_counters(
 	xfs_icsb_unlock(mp);
 }
 
-STATIC void
+void
 xfs_icsb_destroy_counters(
 	xfs_mount_t	*mp)
 {
diff --git a/fs/xfs/xfs_mount.h b/fs/xfs/xfs_mount.h
index 63e0693a358a..f3c1024b1241 100644
--- a/fs/xfs/xfs_mount.h
+++ b/fs/xfs/xfs_mount.h
@@ -61,6 +61,7 @@ struct xfs_bmap_free;
 struct xfs_extdelta;
 struct xfs_swapext;
 struct xfs_mru_cache;
+struct xfs_nameops;
 
 /*
  * Prototypes and functions for the Data Migration subsystem.
@@ -113,7 +114,7 @@ struct xfs_dqtrxops;
 struct xfs_quotainfo;
 
 typedef int	(*xfs_qminit_t)(struct xfs_mount *, uint *, uint *);
-typedef int	(*xfs_qmmount_t)(struct xfs_mount *, uint, uint, int);
+typedef int	(*xfs_qmmount_t)(struct xfs_mount *, uint, uint);
 typedef int	(*xfs_qmunmount_t)(struct xfs_mount *);
 typedef void	(*xfs_qmdone_t)(struct xfs_mount *);
 typedef void	(*xfs_dqrele_t)(struct xfs_dquot *);
@@ -157,8 +158,8 @@ typedef struct xfs_qmops {
 
 #define XFS_QM_INIT(mp, mnt, fl) \
 	(*(mp)->m_qm_ops->xfs_qminit)(mp, mnt, fl)
-#define XFS_QM_MOUNT(mp, mnt, fl, mfsi_flags) \
-	(*(mp)->m_qm_ops->xfs_qmmount)(mp, mnt, fl, mfsi_flags)
+#define XFS_QM_MOUNT(mp, mnt, fl) \
+	(*(mp)->m_qm_ops->xfs_qmmount)(mp, mnt, fl)
 #define XFS_QM_UNMOUNT(mp) \
 	(*(mp)->m_qm_ops->xfs_qmunmount)(mp)
 #define XFS_QM_DONE(mp) \
@@ -210,12 +211,14 @@ typedef struct xfs_icsb_cnts {
 
 extern int	xfs_icsb_init_counters(struct xfs_mount *);
 extern void	xfs_icsb_reinit_counters(struct xfs_mount *);
+extern void	xfs_icsb_destroy_counters(struct xfs_mount *);
 extern void	xfs_icsb_sync_counters(struct xfs_mount *, int);
 extern void	xfs_icsb_sync_counters_locked(struct xfs_mount *, int);
 
 #else
-#define xfs_icsb_init_counters(mp)	(0)
-#define xfs_icsb_reinit_counters(mp)	do { } while (0)
+#define xfs_icsb_init_counters(mp)		(0)
+#define xfs_icsb_destroy_counters(mp)		do { } while (0)
+#define xfs_icsb_reinit_counters(mp)		do { } while (0)
 #define xfs_icsb_sync_counters(mp, flags)	do { } while (0)
 #define xfs_icsb_sync_counters_locked(mp, flags) do { } while (0)
 #endif
@@ -313,6 +316,7 @@ typedef struct xfs_mount {
 	__uint8_t		m_inode_quiesce;/* call quiesce on new inodes.
 						   field governed by m_ilock */
 	__uint8_t		m_sectbb_log;	/* sectlog - BBSHIFT */
+	const struct xfs_nameops *m_dirnameops;	/* vector of dir name ops */
 	int			m_dirblksize;	/* directory block sz--bytes */
 	int			m_dirblkfsbs;	/* directory block sz--fsbs */
 	xfs_dablk_t		m_dirdatablk;	/* blockno of dir data v2 */
@@ -378,6 +382,7 @@ typedef struct xfs_mount {
 						   counters */
 #define XFS_MOUNT_FILESTREAMS	(1ULL << 24)	/* enable the filestreams
 						   allocator */
+#define XFS_MOUNT_NOATTR2	(1ULL << 25)	/* disable use of attr2 format */
 
 
 /*
@@ -437,13 +442,6 @@ void xfs_do_force_shutdown(struct xfs_mount *mp, int flags, char *fname,
 /*
  * Flags for xfs_mountfs
  */
-#define XFS_MFSI_SECOND		0x01	/* Secondary mount -- skip stuff */
-#define XFS_MFSI_CLIENT		0x02	/* Is a client -- skip lots of stuff */
-/*	XFS_MFSI_RRINODES	*/
-#define XFS_MFSI_NOUNLINK	0x08	/* Skip unlinked inode processing in */
-					/* log recovery */
-#define XFS_MFSI_NO_QUOTACHECK	0x10	/* Skip quotacheck processing */
-/*	XFS_MFSI_CONVERT_SUNIT	*/
 #define XFS_MFSI_QUIET		0x40	/* Be silent if mount errors found */
 
 #define XFS_DADDR_TO_AGNO(mp,d)         xfs_daddr_to_agno(mp,d)
@@ -510,15 +508,12 @@ typedef struct xfs_mod_sb {
 #define	XFS_MOUNT_ILOCK(mp)	mutex_lock(&((mp)->m_ilock))
 #define	XFS_MOUNT_IUNLOCK(mp)	mutex_unlock(&((mp)->m_ilock))
 
-extern xfs_mount_t *xfs_mount_init(void);
 extern void	xfs_mod_sb(xfs_trans_t *, __int64_t);
 extern int	xfs_log_sbcount(xfs_mount_t *, uint);
-extern void	xfs_mount_free(xfs_mount_t *mp);
-extern int	xfs_mountfs(xfs_mount_t *mp, int);
+extern int	xfs_mountfs(xfs_mount_t *mp);
 extern void	xfs_mountfs_check_barriers(xfs_mount_t *mp);
 
-extern int	xfs_unmountfs(xfs_mount_t *, struct cred *);
-extern void	xfs_unmountfs_close(xfs_mount_t *, struct cred *);
+extern void	xfs_unmountfs(xfs_mount_t *);
 extern int	xfs_unmountfs_writesb(xfs_mount_t *);
 extern int	xfs_unmount_flush(xfs_mount_t *, int);
 extern int	xfs_mod_incore_sb(xfs_mount_t *, xfs_sb_field_t, int64_t, int);
@@ -544,9 +539,6 @@ extern void	xfs_qmops_put(struct xfs_mount *);
 
 extern struct xfs_dmops xfs_dmcore_xfs;
 
-extern int	xfs_init(void);
-extern void	xfs_cleanup(void);
-
 #endif	/* __KERNEL__ */
 
 #endif	/* __XFS_MOUNT_H__ */
diff --git a/fs/xfs/xfs_mru_cache.c b/fs/xfs/xfs_mru_cache.c
index a0b2c0a2589a..afee7eb24323 100644
--- a/fs/xfs/xfs_mru_cache.c
+++ b/fs/xfs/xfs_mru_cache.c
@@ -307,15 +307,18 @@ xfs_mru_cache_init(void)
 	xfs_mru_elem_zone = kmem_zone_init(sizeof(xfs_mru_cache_elem_t),
 	                                 "xfs_mru_cache_elem");
 	if (!xfs_mru_elem_zone)
-		return ENOMEM;
+		goto out;
 
 	xfs_mru_reap_wq = create_singlethread_workqueue("xfs_mru_cache");
-	if (!xfs_mru_reap_wq) {
-		kmem_zone_destroy(xfs_mru_elem_zone);
-		return ENOMEM;
-	}
+	if (!xfs_mru_reap_wq)
+		goto out_destroy_mru_elem_zone;
 
 	return 0;
+
+ out_destroy_mru_elem_zone:
+	kmem_zone_destroy(xfs_mru_elem_zone);
+ out:
+	return -ENOMEM;
 }
 
 void
@@ -382,9 +385,9 @@ xfs_mru_cache_create(
 
 exit:
 	if (err && mru && mru->lists)
-		kmem_free(mru->lists, mru->grp_count * sizeof(*mru->lists));
+		kmem_free(mru->lists);
 	if (err && mru)
-		kmem_free(mru, sizeof(*mru));
+		kmem_free(mru);
 
 	return err;
 }
@@ -424,8 +427,8 @@ xfs_mru_cache_destroy(
 
 	xfs_mru_cache_flush(mru);
 
-	kmem_free(mru->lists, mru->grp_count * sizeof(*mru->lists));
-	kmem_free(mru, sizeof(*mru));
+	kmem_free(mru->lists);
+	kmem_free(mru);
 }
 
 /*
diff --git a/fs/xfs/xfs_rename.c b/fs/xfs/xfs_rename.c
index d8063e1ad298..d700dacdb10e 100644
--- a/fs/xfs/xfs_rename.c
+++ b/fs/xfs/xfs_rename.c
@@ -336,22 +336,18 @@ xfs_rename(
 		ASSERT(error != EEXIST);
 		if (error)
 			goto abort_return;
-		xfs_ichgtime(src_ip, XFS_ICHGTIME_MOD | XFS_ICHGTIME_CHG);
-
-	} else {
-		/*
-		 * We always want to hit the ctime on the source inode.
-		 * We do it in the if clause above for the 'new_parent &&
-		 * src_is_directory' case, and here we get all the other
-		 * cases.  This isn't strictly required by the standards
-		 * since the source inode isn't really being changed,
-		 * but old unix file systems did it and some incremental
-		 * backup programs won't work without it.
-		 */
-		xfs_ichgtime(src_ip, XFS_ICHGTIME_CHG);
 	}
 
 	/*
+	 * We always want to hit the ctime on the source inode.
+	 *
+	 * This isn't strictly required by the standards since the source
+	 * inode isn't really being changed, but old unix file systems did
+	 * it and some incremental backup programs won't work without it.
+	 */
+	xfs_ichgtime(src_ip, XFS_ICHGTIME_CHG);
+
+	/*
 	 * Adjust the link count on src_dp.  This is necessary when
 	 * renaming a directory, either within one parent when
 	 * the target existed, or across two parent directories.
diff --git a/fs/xfs/xfs_rtalloc.c b/fs/xfs/xfs_rtalloc.c
index a0dc6e5bc5b9..e2f68de16159 100644
--- a/fs/xfs/xfs_rtalloc.c
+++ b/fs/xfs/xfs_rtalloc.c
@@ -74,18 +74,6 @@ STATIC int xfs_rtmodify_summary(xfs_mount_t *, xfs_trans_t *, int,
  */
 
 /*
- * xfs_lowbit32: get low bit set out of 32-bit argument, -1 if none set.
- */
-STATIC int
-xfs_lowbit32(
-	__uint32_t	v)
-{
-	if (v)
-		return ffs(v) - 1;
-	return -1;
-}
-
-/*
  * Allocate space to the bitmap or summary file, and zero it, for growfs.
  */
 STATIC int				/* error */
@@ -450,6 +438,7 @@ xfs_rtallocate_extent_near(
 	}
 	bbno = XFS_BITTOBLOCK(mp, bno);
 	i = 0;
+	ASSERT(minlen != 0);
 	log2len = xfs_highbit32(minlen);
 	/*
 	 * Loop over all bitmap blocks (bbno + i is current block).
@@ -618,6 +607,8 @@ xfs_rtallocate_extent_size(
 	xfs_suminfo_t	sum;		/* summary information for extents */
 
 	ASSERT(minlen % prod == 0 && maxlen % prod == 0);
+	ASSERT(maxlen != 0);
+
 	/*
 	 * Loop over all the levels starting with maxlen.
 	 * At each level, look at all the bitmap blocks, to see if there
@@ -675,6 +666,9 @@ xfs_rtallocate_extent_size(
 		*rtblock = NULLRTBLOCK;
 		return 0;
 	}
+	ASSERT(minlen != 0);
+	ASSERT(maxlen != 0);
+
 	/*
 	 * Loop over sizes, from maxlen down to minlen.
 	 * This time, when we do the allocations, allow smaller ones
@@ -1961,6 +1955,7 @@ xfs_growfs_rt(
 				  nsbp->sb_blocksize * nsbp->sb_rextsize);
 		nsbp->sb_rextents = nsbp->sb_rblocks;
 		do_div(nsbp->sb_rextents, nsbp->sb_rextsize);
+		ASSERT(nsbp->sb_rextents != 0);
 		nsbp->sb_rextslog = xfs_highbit32(nsbp->sb_rextents);
 		nrsumlevels = nmp->m_rsumlevels = nsbp->sb_rextslog + 1;
 		nrsumsize =
@@ -2062,7 +2057,7 @@ xfs_growfs_rt(
 	/*
 	 * Free the fake mp structure.
 	 */
-	kmem_free(nmp, sizeof(*nmp));
+	kmem_free(nmp);
 
 	return error;
 }
diff --git a/fs/xfs/xfs_rw.c b/fs/xfs/xfs_rw.c
index b0f31c09a76d..3a82576dde9a 100644
--- a/fs/xfs/xfs_rw.c
+++ b/fs/xfs/xfs_rw.c
@@ -314,7 +314,7 @@ xfs_bioerror_relse(
 		 * ASYNC buffers.
 		 */
 		XFS_BUF_ERROR(bp, EIO);
-		XFS_BUF_V_IODONESEMA(bp);
+		XFS_BUF_FINISH_IOWAIT(bp);
 	} else {
 		xfs_buf_relse(bp);
 	}
diff --git a/fs/xfs/xfs_sb.h b/fs/xfs/xfs_sb.h
index d904efe7f871..3f8cf1587f4c 100644
--- a/fs/xfs/xfs_sb.h
+++ b/fs/xfs/xfs_sb.h
@@ -46,10 +46,12 @@ struct xfs_mount;
 #define XFS_SB_VERSION_SECTORBIT	0x0800
 #define	XFS_SB_VERSION_EXTFLGBIT	0x1000
 #define	XFS_SB_VERSION_DIRV2BIT		0x2000
+#define	XFS_SB_VERSION_BORGBIT		0x4000	/* ASCII only case-insens. */
 #define	XFS_SB_VERSION_MOREBITSBIT	0x8000
 #define	XFS_SB_VERSION_OKSASHFBITS	\
 	(XFS_SB_VERSION_EXTFLGBIT | \
-	 XFS_SB_VERSION_DIRV2BIT)
+	 XFS_SB_VERSION_DIRV2BIT | \
+	 XFS_SB_VERSION_BORGBIT)
 #define	XFS_SB_VERSION_OKREALFBITS	\
 	(XFS_SB_VERSION_ATTRBIT | \
 	 XFS_SB_VERSION_NLINKBIT | \
@@ -437,6 +439,12 @@ static inline int xfs_sb_version_hassector(xfs_sb_t *sbp)
 		((sbp)->sb_versionnum & XFS_SB_VERSION_SECTORBIT);
 }
 
+static inline int xfs_sb_version_hasasciici(xfs_sb_t *sbp)
+{
+	return (XFS_SB_VERSION_NUM(sbp) == XFS_SB_VERSION_4) && \
+		(sbp->sb_versionnum & XFS_SB_VERSION_BORGBIT);
+}
+
 static inline int xfs_sb_version_hasmorebits(xfs_sb_t *sbp)
 {
 	return (XFS_SB_VERSION_NUM(sbp) == XFS_SB_VERSION_4) && \
@@ -473,6 +481,13 @@ static inline void xfs_sb_version_addattr2(xfs_sb_t *sbp)
 		((sbp)->sb_features2 | XFS_SB_VERSION2_ATTR2BIT)));
 }
 
+static inline void xfs_sb_version_removeattr2(xfs_sb_t *sbp)
+{
+	sbp->sb_features2 &= ~XFS_SB_VERSION2_ATTR2BIT;
+	if (!sbp->sb_features2)
+		sbp->sb_versionnum &= ~XFS_SB_VERSION_MOREBITSBIT;
+}
+
 /*
  * end of superblock version macros
  */
diff --git a/fs/xfs/xfs_trans.c b/fs/xfs/xfs_trans.c
index 140386434aa3..4e1c22a23be5 100644
--- a/fs/xfs/xfs_trans.c
+++ b/fs/xfs/xfs_trans.c
@@ -43,6 +43,7 @@
 #include "xfs_quota.h"
 #include "xfs_trans_priv.h"
 #include "xfs_trans_space.h"
+#include "xfs_inode_item.h"
 
 
 STATIC void	xfs_trans_apply_sb_deltas(xfs_trans_t *);
@@ -253,7 +254,7 @@ _xfs_trans_alloc(
 	tp->t_mountp = mp;
 	tp->t_items_free = XFS_LIC_NUM_SLOTS;
 	tp->t_busy_free = XFS_LBC_NUM_SLOTS;
-	XFS_LIC_INIT(&(tp->t_items));
+	xfs_lic_init(&(tp->t_items));
 	XFS_LBC_INIT(&(tp->t_busy));
 	return tp;
 }
@@ -282,7 +283,7 @@ xfs_trans_dup(
 	ntp->t_mountp = tp->t_mountp;
 	ntp->t_items_free = XFS_LIC_NUM_SLOTS;
 	ntp->t_busy_free = XFS_LBC_NUM_SLOTS;
-	XFS_LIC_INIT(&(ntp->t_items));
+	xfs_lic_init(&(ntp->t_items));
 	XFS_LBC_INIT(&(ntp->t_busy));
 
 	ASSERT(tp->t_flags & XFS_TRANS_PERM_LOG_RES);
@@ -889,7 +890,7 @@ shut_us_down:
 
 	tp->t_commit_lsn = commit_lsn;
 	if (nvec > XFS_TRANS_LOGVEC_COUNT) {
-		kmem_free(log_vector, nvec * sizeof(xfs_log_iovec_t));
+		kmem_free(log_vector);
 	}
 
 	/*
@@ -1169,7 +1170,7 @@ xfs_trans_cancel(
 		while (licp != NULL) {
 			lidp = licp->lic_descs;
 			for (i = 0; i < licp->lic_unused; i++, lidp++) {
-				if (XFS_LIC_ISFREE(licp, i)) {
+				if (xfs_lic_isfree(licp, i)) {
 					continue;
 				}
 
@@ -1216,6 +1217,68 @@ xfs_trans_free(
 	kmem_zone_free(xfs_trans_zone, tp);
 }
 
+/*
+ * Roll from one trans in the sequence of PERMANENT transactions to
+ * the next: permanent transactions are only flushed out when
+ * committed with XFS_TRANS_RELEASE_LOG_RES, but we still want as soon
+ * as possible to let chunks of it go to the log. So we commit the
+ * chunk we've been working on and get a new transaction to continue.
+ */
+int
+xfs_trans_roll(
+	struct xfs_trans	**tpp,
+	struct xfs_inode	*dp)
+{
+	struct xfs_trans	*trans;
+	unsigned int		logres, count;
+	int			error;
+
+	/*
+	 * Ensure that the inode is always logged.
+	 */
+	trans = *tpp;
+	xfs_trans_log_inode(trans, dp, XFS_ILOG_CORE);
+
+	/*
+	 * Copy the critical parameters from one trans to the next.
+	 */
+	logres = trans->t_log_res;
+	count = trans->t_log_count;
+	*tpp = xfs_trans_dup(trans);
+
+	/*
+	 * Commit the current transaction.
+	 * If this commit failed, then it'd just unlock those items that
+	 * are not marked ihold. That also means that a filesystem shutdown
+	 * is in progress. The caller takes the responsibility to cancel
+	 * the duplicate transaction that gets returned.
+	 */
+	error = xfs_trans_commit(trans, 0);
+	if (error)
+		return (error);
+
+	trans = *tpp;
+
+	/*
+	 * Reserve space in the log for th next transaction.
+	 * This also pushes items in the "AIL", the list of logged items,
+	 * out to disk if they are taking up space at the tail of the log
+	 * that we want to use.  This requires that either nothing be locked
+	 * across this call, or that anything that is locked be logged in
+	 * the prior and the next transactions.
+	 */
+	error = xfs_trans_reserve(trans, 0, logres, 0,
+				  XFS_TRANS_PERM_LOG_RES, count);
+	/*
+	 *  Ensure that the inode is in the new transaction and locked.
+	 */
+	if (error)
+		return error;
+
+	xfs_trans_ijoin(trans, dp, XFS_ILOCK_EXCL);
+	xfs_trans_ihold(trans, dp);
+	return 0;
+}
 
 /*
  * THIS SHOULD BE REWRITTEN TO USE xfs_trans_next_item().
@@ -1253,7 +1316,7 @@ xfs_trans_committed(
 	 * Special case the chunk embedded in the transaction.
 	 */
 	licp = &(tp->t_items);
-	if (!(XFS_LIC_ARE_ALL_FREE(licp))) {
+	if (!(xfs_lic_are_all_free(licp))) {
 		xfs_trans_chunk_committed(licp, tp->t_lsn, abortflag);
 	}
 
@@ -1262,10 +1325,10 @@ xfs_trans_committed(
 	 */
 	licp = licp->lic_next;
 	while (licp != NULL) {
-		ASSERT(!XFS_LIC_ARE_ALL_FREE(licp));
+		ASSERT(!xfs_lic_are_all_free(licp));
 		xfs_trans_chunk_committed(licp, tp->t_lsn, abortflag);
 		next_licp = licp->lic_next;
-		kmem_free(licp, sizeof(xfs_log_item_chunk_t));
+		kmem_free(licp);
 		licp = next_licp;
 	}
 
@@ -1325,7 +1388,7 @@ xfs_trans_chunk_committed(
 
 	lidp = licp->lic_descs;
 	for (i = 0; i < licp->lic_unused; i++, lidp++) {
-		if (XFS_LIC_ISFREE(licp, i)) {
+		if (xfs_lic_isfree(licp, i)) {
 			continue;
 		}
 
diff --git a/fs/xfs/xfs_trans.h b/fs/xfs/xfs_trans.h
index 0804207c7391..74c80bd2b0ec 100644
--- a/fs/xfs/xfs_trans.h
+++ b/fs/xfs/xfs_trans.h
@@ -210,62 +210,52 @@ typedef struct xfs_log_item_chunk {
  * lic_unused to the right value (0 matches all free).  The
  * lic_descs.lid_index values are set up as each desc is allocated.
  */
-#define	XFS_LIC_INIT(cp)	xfs_lic_init(cp)
 static inline void xfs_lic_init(xfs_log_item_chunk_t *cp)
 {
 	cp->lic_free = XFS_LIC_FREEMASK;
 }
 
-#define	XFS_LIC_INIT_SLOT(cp,slot)	xfs_lic_init_slot(cp, slot)
 static inline void xfs_lic_init_slot(xfs_log_item_chunk_t *cp, int slot)
 {
 	cp->lic_descs[slot].lid_index = (unsigned char)(slot);
 }
 
-#define	XFS_LIC_VACANCY(cp)		xfs_lic_vacancy(cp)
 static inline int xfs_lic_vacancy(xfs_log_item_chunk_t *cp)
 {
 	return cp->lic_free & XFS_LIC_FREEMASK;
 }
 
-#define	XFS_LIC_ALL_FREE(cp)		xfs_lic_all_free(cp)
 static inline void xfs_lic_all_free(xfs_log_item_chunk_t *cp)
 {
 	cp->lic_free = XFS_LIC_FREEMASK;
 }
 
-#define	XFS_LIC_ARE_ALL_FREE(cp)	xfs_lic_are_all_free(cp)
 static inline int xfs_lic_are_all_free(xfs_log_item_chunk_t *cp)
 {
 	return ((cp->lic_free & XFS_LIC_FREEMASK) == XFS_LIC_FREEMASK);
 }
 
-#define	XFS_LIC_ISFREE(cp,slot)	xfs_lic_isfree(cp,slot)
 static inline int xfs_lic_isfree(xfs_log_item_chunk_t *cp, int slot)
 {
 	return (cp->lic_free & (1 << slot));
 }
 
-#define	XFS_LIC_CLAIM(cp,slot)		xfs_lic_claim(cp,slot)
 static inline void xfs_lic_claim(xfs_log_item_chunk_t *cp, int slot)
 {
 	cp->lic_free &= ~(1 << slot);
 }
 
-#define	XFS_LIC_RELSE(cp,slot)		xfs_lic_relse(cp,slot)
 static inline void xfs_lic_relse(xfs_log_item_chunk_t *cp, int slot)
 {
 	cp->lic_free |= 1 << slot;
 }
 
-#define	XFS_LIC_SLOT(cp,slot)		xfs_lic_slot(cp,slot)
 static inline xfs_log_item_desc_t *
 xfs_lic_slot(xfs_log_item_chunk_t *cp, int slot)
 {
 	return &(cp->lic_descs[slot]);
 }
 
-#define	XFS_LIC_DESC_TO_SLOT(dp)	xfs_lic_desc_to_slot(dp)
 static inline int xfs_lic_desc_to_slot(xfs_log_item_desc_t *dp)
 {
 	return (uint)dp->lid_index;
@@ -278,7 +268,6 @@ static inline int xfs_lic_desc_to_slot(xfs_log_item_desc_t *dp)
  * All of this yields the address of the chunk, which is
  * cast to a chunk pointer.
  */
-#define	XFS_LIC_DESC_TO_CHUNK(dp)	xfs_lic_desc_to_chunk(dp)
 static inline xfs_log_item_chunk_t *
 xfs_lic_desc_to_chunk(xfs_log_item_desc_t *dp)
 {
@@ -986,6 +975,7 @@ int		_xfs_trans_commit(xfs_trans_t *,
 				  int *);
 #define xfs_trans_commit(tp, flags)	_xfs_trans_commit(tp, flags, NULL)
 void		xfs_trans_cancel(xfs_trans_t *, int);
+int		xfs_trans_roll(struct xfs_trans **, struct xfs_inode *);
 int		xfs_trans_ail_init(struct xfs_mount *);
 void		xfs_trans_ail_destroy(struct xfs_mount *);
 void		xfs_trans_push_ail(struct xfs_mount *, xfs_lsn_t);
diff --git a/fs/xfs/xfs_trans_buf.c b/fs/xfs/xfs_trans_buf.c
index cb0c5839154b..4e855b5ced66 100644
--- a/fs/xfs/xfs_trans_buf.c
+++ b/fs/xfs/xfs_trans_buf.c
@@ -1021,16 +1021,16 @@ xfs_trans_buf_item_match(
 	bp = NULL;
 	len = BBTOB(len);
 	licp = &tp->t_items;
-	if (!XFS_LIC_ARE_ALL_FREE(licp)) {
+	if (!xfs_lic_are_all_free(licp)) {
 		for (i = 0; i < licp->lic_unused; i++) {
 			/*
 			 * Skip unoccupied slots.
 			 */
-			if (XFS_LIC_ISFREE(licp, i)) {
+			if (xfs_lic_isfree(licp, i)) {
 				continue;
 			}
 
-			lidp = XFS_LIC_SLOT(licp, i);
+			lidp = xfs_lic_slot(licp, i);
 			blip = (xfs_buf_log_item_t *)lidp->lid_item;
 			if (blip->bli_item.li_type != XFS_LI_BUF) {
 				continue;
@@ -1074,7 +1074,7 @@ xfs_trans_buf_item_match_all(
 	bp = NULL;
 	len = BBTOB(len);
 	for (licp = &tp->t_items; licp != NULL; licp = licp->lic_next) {
-		if (XFS_LIC_ARE_ALL_FREE(licp)) {
+		if (xfs_lic_are_all_free(licp)) {
 			ASSERT(licp == &tp->t_items);
 			ASSERT(licp->lic_next == NULL);
 			return NULL;
@@ -1083,11 +1083,11 @@ xfs_trans_buf_item_match_all(
 			/*
 			 * Skip unoccupied slots.
 			 */
-			if (XFS_LIC_ISFREE(licp, i)) {
+			if (xfs_lic_isfree(licp, i)) {
 				continue;
 			}
 
-			lidp = XFS_LIC_SLOT(licp, i);
+			lidp = xfs_lic_slot(licp, i);
 			blip = (xfs_buf_log_item_t *)lidp->lid_item;
 			if (blip->bli_item.li_type != XFS_LI_BUF) {
 				continue;
diff --git a/fs/xfs/xfs_trans_inode.c b/fs/xfs/xfs_trans_inode.c
index 4c70bf5e9985..2a1c0f071f91 100644
--- a/fs/xfs/xfs_trans_inode.c
+++ b/fs/xfs/xfs_trans_inode.c
@@ -291,7 +291,7 @@ xfs_trans_inode_broot_debug(
 	iip = ip->i_itemp;
 	if (iip->ili_root_size != 0) {
 		ASSERT(iip->ili_orig_root != NULL);
-		kmem_free(iip->ili_orig_root, iip->ili_root_size);
+		kmem_free(iip->ili_orig_root);
 		iip->ili_root_size = 0;
 		iip->ili_orig_root = NULL;
 	}
diff --git a/fs/xfs/xfs_trans_item.c b/fs/xfs/xfs_trans_item.c
index 66a09f0d894b..3c666e8317f8 100644
--- a/fs/xfs/xfs_trans_item.c
+++ b/fs/xfs/xfs_trans_item.c
@@ -53,11 +53,11 @@ xfs_trans_add_item(xfs_trans_t *tp, xfs_log_item_t *lip)
 		 * Initialize the chunk, and then
 		 * claim the first slot in the newly allocated chunk.
 		 */
-		XFS_LIC_INIT(licp);
-		XFS_LIC_CLAIM(licp, 0);
+		xfs_lic_init(licp);
+		xfs_lic_claim(licp, 0);
 		licp->lic_unused = 1;
-		XFS_LIC_INIT_SLOT(licp, 0);
-		lidp = XFS_LIC_SLOT(licp, 0);
+		xfs_lic_init_slot(licp, 0);
+		lidp = xfs_lic_slot(licp, 0);
 
 		/*
 		 * Link in the new chunk and update the free count.
@@ -88,14 +88,14 @@ xfs_trans_add_item(xfs_trans_t *tp, xfs_log_item_t *lip)
 	 */
 	licp = &tp->t_items;
 	while (licp != NULL) {
-		if (XFS_LIC_VACANCY(licp)) {
+		if (xfs_lic_vacancy(licp)) {
 			if (licp->lic_unused <= XFS_LIC_MAX_SLOT) {
 				i = licp->lic_unused;
-				ASSERT(XFS_LIC_ISFREE(licp, i));
+				ASSERT(xfs_lic_isfree(licp, i));
 				break;
 			}
 			for (i = 0; i <= XFS_LIC_MAX_SLOT; i++) {
-				if (XFS_LIC_ISFREE(licp, i))
+				if (xfs_lic_isfree(licp, i))
 					break;
 			}
 			ASSERT(i <= XFS_LIC_MAX_SLOT);
@@ -108,12 +108,12 @@ xfs_trans_add_item(xfs_trans_t *tp, xfs_log_item_t *lip)
 	 * If we find a free descriptor, claim it,
 	 * initialize it, and return it.
 	 */
-	XFS_LIC_CLAIM(licp, i);
+	xfs_lic_claim(licp, i);
 	if (licp->lic_unused <= i) {
 		licp->lic_unused = i + 1;
-		XFS_LIC_INIT_SLOT(licp, i);
+		xfs_lic_init_slot(licp, i);
 	}
-	lidp = XFS_LIC_SLOT(licp, i);
+	lidp = xfs_lic_slot(licp, i);
 	tp->t_items_free--;
 	lidp->lid_item = lip;
 	lidp->lid_flags = 0;
@@ -136,9 +136,9 @@ xfs_trans_free_item(xfs_trans_t	*tp, xfs_log_item_desc_t *lidp)
 	xfs_log_item_chunk_t	*licp;
 	xfs_log_item_chunk_t	**licpp;
 
-	slot = XFS_LIC_DESC_TO_SLOT(lidp);
-	licp = XFS_LIC_DESC_TO_CHUNK(lidp);
-	XFS_LIC_RELSE(licp, slot);
+	slot = xfs_lic_desc_to_slot(lidp);
+	licp = xfs_lic_desc_to_chunk(lidp);
+	xfs_lic_relse(licp, slot);
 	lidp->lid_item->li_desc = NULL;
 	tp->t_items_free++;
 
@@ -154,14 +154,14 @@ xfs_trans_free_item(xfs_trans_t	*tp, xfs_log_item_desc_t *lidp)
 	 * Also decrement the transaction structure's count of free items
 	 * by the number in a chunk since we are freeing an empty chunk.
 	 */
-	if (XFS_LIC_ARE_ALL_FREE(licp) && (licp != &(tp->t_items))) {
+	if (xfs_lic_are_all_free(licp) && (licp != &(tp->t_items))) {
 		licpp = &(tp->t_items.lic_next);
 		while (*licpp != licp) {
 			ASSERT(*licpp != NULL);
 			licpp = &((*licpp)->lic_next);
 		}
 		*licpp = licp->lic_next;
-		kmem_free(licp, sizeof(xfs_log_item_chunk_t));
+		kmem_free(licp);
 		tp->t_items_free -= XFS_LIC_NUM_SLOTS;
 	}
 }
@@ -207,20 +207,20 @@ xfs_trans_first_item(xfs_trans_t *tp)
 	/*
 	 * If it's not in the first chunk, skip to the second.
 	 */
-	if (XFS_LIC_ARE_ALL_FREE(licp)) {
+	if (xfs_lic_are_all_free(licp)) {
 		licp = licp->lic_next;
 	}
 
 	/*
 	 * Return the first non-free descriptor in the chunk.
 	 */
-	ASSERT(!XFS_LIC_ARE_ALL_FREE(licp));
+	ASSERT(!xfs_lic_are_all_free(licp));
 	for (i = 0; i < licp->lic_unused; i++) {
-		if (XFS_LIC_ISFREE(licp, i)) {
+		if (xfs_lic_isfree(licp, i)) {
 			continue;
 		}
 
-		return XFS_LIC_SLOT(licp, i);
+		return xfs_lic_slot(licp, i);
 	}
 	cmn_err(CE_WARN, "xfs_trans_first_item() -- no first item");
 	return NULL;
@@ -242,18 +242,18 @@ xfs_trans_next_item(xfs_trans_t *tp, xfs_log_item_desc_t *lidp)
 	xfs_log_item_chunk_t	*licp;
 	int			i;
 
-	licp = XFS_LIC_DESC_TO_CHUNK(lidp);
+	licp = xfs_lic_desc_to_chunk(lidp);
 
 	/*
 	 * First search the rest of the chunk. The for loop keeps us
 	 * from referencing things beyond the end of the chunk.
 	 */
-	for (i = (int)XFS_LIC_DESC_TO_SLOT(lidp) + 1; i < licp->lic_unused; i++) {
-		if (XFS_LIC_ISFREE(licp, i)) {
+	for (i = (int)xfs_lic_desc_to_slot(lidp) + 1; i < licp->lic_unused; i++) {
+		if (xfs_lic_isfree(licp, i)) {
 			continue;
 		}
 
-		return XFS_LIC_SLOT(licp, i);
+		return xfs_lic_slot(licp, i);
 	}
 
 	/*
@@ -266,13 +266,13 @@ xfs_trans_next_item(xfs_trans_t *tp, xfs_log_item_desc_t *lidp)
 	}
 
 	licp = licp->lic_next;
-	ASSERT(!XFS_LIC_ARE_ALL_FREE(licp));
+	ASSERT(!xfs_lic_are_all_free(licp));
 	for (i = 0; i < licp->lic_unused; i++) {
-		if (XFS_LIC_ISFREE(licp, i)) {
+		if (xfs_lic_isfree(licp, i)) {
 			continue;
 		}
 
-		return XFS_LIC_SLOT(licp, i);
+		return xfs_lic_slot(licp, i);
 	}
 	ASSERT(0);
 	/* NOTREACHED */
@@ -300,9 +300,9 @@ xfs_trans_free_items(
 	/*
 	 * Special case the embedded chunk so we don't free it below.
 	 */
-	if (!XFS_LIC_ARE_ALL_FREE(licp)) {
+	if (!xfs_lic_are_all_free(licp)) {
 		(void) xfs_trans_unlock_chunk(licp, 1, abort, NULLCOMMITLSN);
-		XFS_LIC_ALL_FREE(licp);
+		xfs_lic_all_free(licp);
 		licp->lic_unused = 0;
 	}
 	licp = licp->lic_next;
@@ -311,10 +311,10 @@ xfs_trans_free_items(
 	 * Unlock each item in each chunk and free the chunks.
 	 */
 	while (licp != NULL) {
-		ASSERT(!XFS_LIC_ARE_ALL_FREE(licp));
+		ASSERT(!xfs_lic_are_all_free(licp));
 		(void) xfs_trans_unlock_chunk(licp, 1, abort, NULLCOMMITLSN);
 		next_licp = licp->lic_next;
-		kmem_free(licp, sizeof(xfs_log_item_chunk_t));
+		kmem_free(licp);
 		licp = next_licp;
 	}
 
@@ -347,7 +347,7 @@ xfs_trans_unlock_items(xfs_trans_t *tp, xfs_lsn_t commit_lsn)
 	/*
 	 * Special case the embedded chunk so we don't free.
 	 */
-	if (!XFS_LIC_ARE_ALL_FREE(licp)) {
+	if (!xfs_lic_are_all_free(licp)) {
 		freed = xfs_trans_unlock_chunk(licp, 0, 0, commit_lsn);
 	}
 	licpp = &(tp->t_items.lic_next);
@@ -358,12 +358,12 @@ xfs_trans_unlock_items(xfs_trans_t *tp, xfs_lsn_t commit_lsn)
 	 * and free empty chunks.
 	 */
 	while (licp != NULL) {
-		ASSERT(!XFS_LIC_ARE_ALL_FREE(licp));
+		ASSERT(!xfs_lic_are_all_free(licp));
 		freed += xfs_trans_unlock_chunk(licp, 0, 0, commit_lsn);
 		next_licp = licp->lic_next;
-		if (XFS_LIC_ARE_ALL_FREE(licp)) {
+		if (xfs_lic_are_all_free(licp)) {
 			*licpp = next_licp;
-			kmem_free(licp, sizeof(xfs_log_item_chunk_t));
+			kmem_free(licp);
 			freed -= XFS_LIC_NUM_SLOTS;
 		} else {
 			licpp = &(licp->lic_next);
@@ -402,7 +402,7 @@ xfs_trans_unlock_chunk(
 	freed = 0;
 	lidp = licp->lic_descs;
 	for (i = 0; i < licp->lic_unused; i++, lidp++) {
-		if (XFS_LIC_ISFREE(licp, i)) {
+		if (xfs_lic_isfree(licp, i)) {
 			continue;
 		}
 		lip = lidp->lid_item;
@@ -421,7 +421,7 @@ xfs_trans_unlock_chunk(
 		 */
 		if (!(freeing_chunk) &&
 		    (!(lidp->lid_flags & XFS_LID_DIRTY) || abort)) {
-			XFS_LIC_RELSE(licp, i);
+			xfs_lic_relse(licp, i);
 			freed++;
 		}
 	}
@@ -530,7 +530,7 @@ xfs_trans_free_busy(xfs_trans_t *tp)
 	lbcp = tp->t_busy.lbc_next;
 	while (lbcp != NULL) {
 		lbcq = lbcp->lbc_next;
-		kmem_free(lbcp, sizeof(xfs_log_busy_chunk_t));
+		kmem_free(lbcp);
 		lbcp = lbcq;
 	}
 
diff --git a/fs/xfs/xfs_utils.c b/fs/xfs/xfs_utils.c
index 98e5f110ba5f..35d4d414bcc2 100644
--- a/fs/xfs/xfs_utils.c
+++ b/fs/xfs/xfs_utils.c
@@ -237,7 +237,7 @@ xfs_droplink(
 
 	ASSERT (ip->i_d.di_nlink > 0);
 	ip->i_d.di_nlink--;
-	drop_nlink(ip->i_vnode);
+	drop_nlink(VFS_I(ip));
 	xfs_trans_log_inode(tp, ip, XFS_ILOG_CORE);
 
 	error = 0;
@@ -301,7 +301,7 @@ xfs_bumplink(
 
 	ASSERT(ip->i_d.di_nlink > 0);
 	ip->i_d.di_nlink++;
-	inc_nlink(ip->i_vnode);
+	inc_nlink(VFS_I(ip));
 	if ((ip->i_d.di_version == XFS_DINODE_VERSION_1) &&
 	    (ip->i_d.di_nlink > XFS_MAXLINK_1)) {
 		/*
diff --git a/fs/xfs/xfs_utils.h b/fs/xfs/xfs_utils.h
index f316cb85d8e2..ef321225d269 100644
--- a/fs/xfs/xfs_utils.h
+++ b/fs/xfs/xfs_utils.h
@@ -18,9 +18,6 @@
 #ifndef __XFS_UTILS_H__
 #define __XFS_UTILS_H__
 
-#define IRELE(ip)	VN_RELE(XFS_ITOV(ip))
-#define IHOLD(ip)	VN_HOLD(XFS_ITOV(ip))
-
 extern int xfs_truncate_file(xfs_mount_t *, xfs_inode_t *);
 extern int xfs_dir_ialloc(xfs_trans_t **, xfs_inode_t *, mode_t, xfs_nlink_t,
 				xfs_dev_t, cred_t *, prid_t, int,
diff --git a/fs/xfs/xfs_vfsops.c b/fs/xfs/xfs_vfsops.c
index 30bacd8bb0e5..439dd3939dda 100644
--- a/fs/xfs/xfs_vfsops.c
+++ b/fs/xfs/xfs_vfsops.c
@@ -58,586 +58,6 @@
 #include "xfs_utils.h"
 
 
-int __init
-xfs_init(void)
-{
-#ifdef XFS_DABUF_DEBUG
-	extern spinlock_t        xfs_dabuf_global_lock;
-	spin_lock_init(&xfs_dabuf_global_lock);
-#endif
-
-	/*
-	 * Initialize all of the zone allocators we use.
-	 */
-	xfs_log_ticket_zone = kmem_zone_init(sizeof(xlog_ticket_t),
-						"xfs_log_ticket");
-	xfs_bmap_free_item_zone = kmem_zone_init(sizeof(xfs_bmap_free_item_t),
-						"xfs_bmap_free_item");
-	xfs_btree_cur_zone = kmem_zone_init(sizeof(xfs_btree_cur_t),
-						"xfs_btree_cur");
-	xfs_da_state_zone = kmem_zone_init(sizeof(xfs_da_state_t),
-						"xfs_da_state");
-	xfs_dabuf_zone = kmem_zone_init(sizeof(xfs_dabuf_t), "xfs_dabuf");
-	xfs_ifork_zone = kmem_zone_init(sizeof(xfs_ifork_t), "xfs_ifork");
-	xfs_trans_zone = kmem_zone_init(sizeof(xfs_trans_t), "xfs_trans");
-	xfs_acl_zone_init(xfs_acl_zone, "xfs_acl");
-	xfs_mru_cache_init();
-	xfs_filestream_init();
-
-	/*
-	 * The size of the zone allocated buf log item is the maximum
-	 * size possible under XFS.  This wastes a little bit of memory,
-	 * but it is much faster.
-	 */
-	xfs_buf_item_zone =
-		kmem_zone_init((sizeof(xfs_buf_log_item_t) +
-				(((XFS_MAX_BLOCKSIZE / XFS_BLI_CHUNK) /
-				  NBWORD) * sizeof(int))),
-			       "xfs_buf_item");
-	xfs_efd_zone =
-		kmem_zone_init((sizeof(xfs_efd_log_item_t) +
-			       ((XFS_EFD_MAX_FAST_EXTENTS - 1) *
-				 sizeof(xfs_extent_t))),
-				      "xfs_efd_item");
-	xfs_efi_zone =
-		kmem_zone_init((sizeof(xfs_efi_log_item_t) +
-			       ((XFS_EFI_MAX_FAST_EXTENTS - 1) *
-				 sizeof(xfs_extent_t))),
-				      "xfs_efi_item");
-
-	/*
-	 * These zones warrant special memory allocator hints
-	 */
-	xfs_inode_zone =
-		kmem_zone_init_flags(sizeof(xfs_inode_t), "xfs_inode",
-					KM_ZONE_HWALIGN | KM_ZONE_RECLAIM |
-					KM_ZONE_SPREAD, NULL);
-	xfs_ili_zone =
-		kmem_zone_init_flags(sizeof(xfs_inode_log_item_t), "xfs_ili",
-					KM_ZONE_SPREAD, NULL);
-
-	/*
-	 * Allocate global trace buffers.
-	 */
-#ifdef XFS_ALLOC_TRACE
-	xfs_alloc_trace_buf = ktrace_alloc(XFS_ALLOC_TRACE_SIZE, KM_SLEEP);
-#endif
-#ifdef XFS_BMAP_TRACE
-	xfs_bmap_trace_buf = ktrace_alloc(XFS_BMAP_TRACE_SIZE, KM_SLEEP);
-#endif
-#ifdef XFS_BMBT_TRACE
-	xfs_bmbt_trace_buf = ktrace_alloc(XFS_BMBT_TRACE_SIZE, KM_SLEEP);
-#endif
-#ifdef XFS_ATTR_TRACE
-	xfs_attr_trace_buf = ktrace_alloc(XFS_ATTR_TRACE_SIZE, KM_SLEEP);
-#endif
-#ifdef XFS_DIR2_TRACE
-	xfs_dir2_trace_buf = ktrace_alloc(XFS_DIR2_GTRACE_SIZE, KM_SLEEP);
-#endif
-
-	xfs_dir_startup();
-
-#if (defined(DEBUG) || defined(INDUCE_IO_ERROR))
-	xfs_error_test_init();
-#endif /* DEBUG || INDUCE_IO_ERROR */
-
-	xfs_init_procfs();
-	xfs_sysctl_register();
-	return 0;
-}
-
-void __exit
-xfs_cleanup(void)
-{
-	extern kmem_zone_t	*xfs_inode_zone;
-	extern kmem_zone_t	*xfs_efd_zone;
-	extern kmem_zone_t	*xfs_efi_zone;
-
-	xfs_cleanup_procfs();
-	xfs_sysctl_unregister();
-	xfs_filestream_uninit();
-	xfs_mru_cache_uninit();
-	xfs_acl_zone_destroy(xfs_acl_zone);
-
-#ifdef XFS_DIR2_TRACE
-	ktrace_free(xfs_dir2_trace_buf);
-#endif
-#ifdef XFS_ATTR_TRACE
-	ktrace_free(xfs_attr_trace_buf);
-#endif
-#ifdef XFS_BMBT_TRACE
-	ktrace_free(xfs_bmbt_trace_buf);
-#endif
-#ifdef XFS_BMAP_TRACE
-	ktrace_free(xfs_bmap_trace_buf);
-#endif
-#ifdef XFS_ALLOC_TRACE
-	ktrace_free(xfs_alloc_trace_buf);
-#endif
-
-	kmem_zone_destroy(xfs_bmap_free_item_zone);
-	kmem_zone_destroy(xfs_btree_cur_zone);
-	kmem_zone_destroy(xfs_inode_zone);
-	kmem_zone_destroy(xfs_trans_zone);
-	kmem_zone_destroy(xfs_da_state_zone);
-	kmem_zone_destroy(xfs_dabuf_zone);
-	kmem_zone_destroy(xfs_buf_item_zone);
-	kmem_zone_destroy(xfs_efd_zone);
-	kmem_zone_destroy(xfs_efi_zone);
-	kmem_zone_destroy(xfs_ifork_zone);
-	kmem_zone_destroy(xfs_ili_zone);
-	kmem_zone_destroy(xfs_log_ticket_zone);
-}
-
-/*
- * xfs_start_flags
- *
- * This function fills in xfs_mount_t fields based on mount args.
- * Note: the superblock has _not_ yet been read in.
- */
-STATIC int
-xfs_start_flags(
-	struct xfs_mount_args	*ap,
-	struct xfs_mount	*mp)
-{
-	/* Values are in BBs */
-	if ((ap->flags & XFSMNT_NOALIGN) != XFSMNT_NOALIGN) {
-		/*
-		 * At this point the superblock has not been read
-		 * in, therefore we do not know the block size.
-		 * Before the mount call ends we will convert
-		 * these to FSBs.
-		 */
-		mp->m_dalign = ap->sunit;
-		mp->m_swidth = ap->swidth;
-	}
-
-	if (ap->logbufs != -1 &&
-	    ap->logbufs != 0 &&
-	    (ap->logbufs < XLOG_MIN_ICLOGS ||
-	     ap->logbufs > XLOG_MAX_ICLOGS)) {
-		cmn_err(CE_WARN,
-			"XFS: invalid logbufs value: %d [not %d-%d]",
-			ap->logbufs, XLOG_MIN_ICLOGS, XLOG_MAX_ICLOGS);
-		return XFS_ERROR(EINVAL);
-	}
-	mp->m_logbufs = ap->logbufs;
-	if (ap->logbufsize != -1 &&
-	    ap->logbufsize !=  0 &&
-	    (ap->logbufsize < XLOG_MIN_RECORD_BSIZE ||
-	     ap->logbufsize > XLOG_MAX_RECORD_BSIZE ||
-	     !is_power_of_2(ap->logbufsize))) {
-		cmn_err(CE_WARN,
-	"XFS: invalid logbufsize: %d [not 16k,32k,64k,128k or 256k]",
-			ap->logbufsize);
-		return XFS_ERROR(EINVAL);
-	}
-	mp->m_logbsize = ap->logbufsize;
-	mp->m_fsname_len = strlen(ap->fsname) + 1;
-	mp->m_fsname = kmem_alloc(mp->m_fsname_len, KM_SLEEP);
-	strcpy(mp->m_fsname, ap->fsname);
-	if (ap->rtname[0]) {
-		mp->m_rtname = kmem_alloc(strlen(ap->rtname) + 1, KM_SLEEP);
-		strcpy(mp->m_rtname, ap->rtname);
-	}
-	if (ap->logname[0]) {
-		mp->m_logname = kmem_alloc(strlen(ap->logname) + 1, KM_SLEEP);
-		strcpy(mp->m_logname, ap->logname);
-	}
-
-	if (ap->flags & XFSMNT_WSYNC)
-		mp->m_flags |= XFS_MOUNT_WSYNC;
-#if XFS_BIG_INUMS
-	if (ap->flags & XFSMNT_INO64) {
-		mp->m_flags |= XFS_MOUNT_INO64;
-		mp->m_inoadd = XFS_INO64_OFFSET;
-	}
-#endif
-	if (ap->flags & XFSMNT_RETERR)
-		mp->m_flags |= XFS_MOUNT_RETERR;
-	if (ap->flags & XFSMNT_NOALIGN)
-		mp->m_flags |= XFS_MOUNT_NOALIGN;
-	if (ap->flags & XFSMNT_SWALLOC)
-		mp->m_flags |= XFS_MOUNT_SWALLOC;
-	if (ap->flags & XFSMNT_OSYNCISOSYNC)
-		mp->m_flags |= XFS_MOUNT_OSYNCISOSYNC;
-	if (ap->flags & XFSMNT_32BITINODES)
-		mp->m_flags |= XFS_MOUNT_32BITINODES;
-
-	if (ap->flags & XFSMNT_IOSIZE) {
-		if (ap->iosizelog > XFS_MAX_IO_LOG ||
-		    ap->iosizelog < XFS_MIN_IO_LOG) {
-			cmn_err(CE_WARN,
-		"XFS: invalid log iosize: %d [not %d-%d]",
-				ap->iosizelog, XFS_MIN_IO_LOG,
-				XFS_MAX_IO_LOG);
-			return XFS_ERROR(EINVAL);
-		}
-
-		mp->m_flags |= XFS_MOUNT_DFLT_IOSIZE;
-		mp->m_readio_log = mp->m_writeio_log = ap->iosizelog;
-	}
-
-	if (ap->flags & XFSMNT_IKEEP)
-		mp->m_flags |= XFS_MOUNT_IKEEP;
-	if (ap->flags & XFSMNT_DIRSYNC)
-		mp->m_flags |= XFS_MOUNT_DIRSYNC;
-	if (ap->flags & XFSMNT_ATTR2)
-		mp->m_flags |= XFS_MOUNT_ATTR2;
-
-	if (ap->flags2 & XFSMNT2_COMPAT_IOSIZE)
-		mp->m_flags |= XFS_MOUNT_COMPAT_IOSIZE;
-
-	/*
-	 * no recovery flag requires a read-only mount
-	 */
-	if (ap->flags & XFSMNT_NORECOVERY) {
-		if (!(mp->m_flags & XFS_MOUNT_RDONLY)) {
-			cmn_err(CE_WARN,
-	"XFS: tried to mount a FS read-write without recovery!");
-			return XFS_ERROR(EINVAL);
-		}
-		mp->m_flags |= XFS_MOUNT_NORECOVERY;
-	}
-
-	if (ap->flags & XFSMNT_NOUUID)
-		mp->m_flags |= XFS_MOUNT_NOUUID;
-	if (ap->flags & XFSMNT_BARRIER)
-		mp->m_flags |= XFS_MOUNT_BARRIER;
-	else
-		mp->m_flags &= ~XFS_MOUNT_BARRIER;
-
-	if (ap->flags2 & XFSMNT2_FILESTREAMS)
-		mp->m_flags |= XFS_MOUNT_FILESTREAMS;
-
-	if (ap->flags & XFSMNT_DMAPI)
-		mp->m_flags |= XFS_MOUNT_DMAPI;
-	return 0;
-}
-
-/*
- * This function fills in xfs_mount_t fields based on mount args.
- * Note: the superblock _has_ now been read in.
- */
-STATIC int
-xfs_finish_flags(
-	struct xfs_mount_args	*ap,
-	struct xfs_mount	*mp)
-{
-	int			ronly = (mp->m_flags & XFS_MOUNT_RDONLY);
-
-	/* Fail a mount where the logbuf is smaller then the log stripe */
-	if (xfs_sb_version_haslogv2(&mp->m_sb)) {
-		if ((ap->logbufsize <= 0) &&
-		    (mp->m_sb.sb_logsunit > XLOG_BIG_RECORD_BSIZE)) {
-			mp->m_logbsize = mp->m_sb.sb_logsunit;
-		} else if (ap->logbufsize > 0 &&
-			   ap->logbufsize < mp->m_sb.sb_logsunit) {
-			cmn_err(CE_WARN,
-	"XFS: logbuf size must be greater than or equal to log stripe size");
-			return XFS_ERROR(EINVAL);
-		}
-	} else {
-		/* Fail a mount if the logbuf is larger than 32K */
-		if (ap->logbufsize > XLOG_BIG_RECORD_BSIZE) {
-			cmn_err(CE_WARN,
-	"XFS: logbuf size for version 1 logs must be 16K or 32K");
-			return XFS_ERROR(EINVAL);
-		}
-	}
-
-	if (xfs_sb_version_hasattr2(&mp->m_sb))
-		mp->m_flags |= XFS_MOUNT_ATTR2;
-
-	/*
-	 * prohibit r/w mounts of read-only filesystems
-	 */
-	if ((mp->m_sb.sb_flags & XFS_SBF_READONLY) && !ronly) {
-		cmn_err(CE_WARN,
-	"XFS: cannot mount a read-only filesystem as read-write");
-		return XFS_ERROR(EROFS);
-	}
-
-	/*
-	 * check for shared mount.
-	 */
-	if (ap->flags & XFSMNT_SHARED) {
-		if (!xfs_sb_version_hasshared(&mp->m_sb))
-			return XFS_ERROR(EINVAL);
-
-		/*
-		 * For IRIX 6.5, shared mounts must have the shared
-		 * version bit set, have the persistent readonly
-		 * field set, must be version 0 and can only be mounted
-		 * read-only.
-		 */
-		if (!ronly || !(mp->m_sb.sb_flags & XFS_SBF_READONLY) ||
-		     (mp->m_sb.sb_shared_vn != 0))
-			return XFS_ERROR(EINVAL);
-
-		mp->m_flags |= XFS_MOUNT_SHARED;
-
-		/*
-		 * Shared XFS V0 can't deal with DMI.  Return EINVAL.
-		 */
-		if (mp->m_sb.sb_shared_vn == 0 && (ap->flags & XFSMNT_DMAPI))
-			return XFS_ERROR(EINVAL);
-	}
-
-	if (ap->flags & XFSMNT_UQUOTA) {
-		mp->m_qflags |= (XFS_UQUOTA_ACCT | XFS_UQUOTA_ACTIVE);
-		if (ap->flags & XFSMNT_UQUOTAENF)
-			mp->m_qflags |= XFS_UQUOTA_ENFD;
-	}
-
-	if (ap->flags & XFSMNT_GQUOTA) {
-		mp->m_qflags |= (XFS_GQUOTA_ACCT | XFS_GQUOTA_ACTIVE);
-		if (ap->flags & XFSMNT_GQUOTAENF)
-			mp->m_qflags |= XFS_OQUOTA_ENFD;
-	} else if (ap->flags & XFSMNT_PQUOTA) {
-		mp->m_qflags |= (XFS_PQUOTA_ACCT | XFS_PQUOTA_ACTIVE);
-		if (ap->flags & XFSMNT_PQUOTAENF)
-			mp->m_qflags |= XFS_OQUOTA_ENFD;
-	}
-
-	return 0;
-}
-
-/*
- * xfs_mount
- *
- * The file system configurations are:
- *	(1) device (partition) with data and internal log
- *	(2) logical volume with data and log subvolumes.
- *	(3) logical volume with data, log, and realtime subvolumes.
- *
- * We only have to handle opening the log and realtime volumes here if
- * they are present.  The data subvolume has already been opened by
- * get_sb_bdev() and is stored in vfsp->vfs_super->s_bdev.
- */
-int
-xfs_mount(
-	struct xfs_mount	*mp,
-	struct xfs_mount_args	*args,
-	cred_t			*credp)
-{
-	struct block_device	*ddev, *logdev, *rtdev;
-	int			flags = 0, error;
-
-	ddev = mp->m_super->s_bdev;
-	logdev = rtdev = NULL;
-
-	error = xfs_dmops_get(mp, args);
-	if (error)
-		return error;
-	error = xfs_qmops_get(mp, args);
-	if (error)
-		return error;
-
-	if (args->flags & XFSMNT_QUIET)
-		flags |= XFS_MFSI_QUIET;
-
-	/*
-	 * Open real time and log devices - order is important.
-	 */
-	if (args->logname[0]) {
-		error = xfs_blkdev_get(mp, args->logname, &logdev);
-		if (error)
-			return error;
-	}
-	if (args->rtname[0]) {
-		error = xfs_blkdev_get(mp, args->rtname, &rtdev);
-		if (error) {
-			xfs_blkdev_put(logdev);
-			return error;
-		}
-
-		if (rtdev == ddev || rtdev == logdev) {
-			cmn_err(CE_WARN,
-	"XFS: Cannot mount filesystem with identical rtdev and ddev/logdev.");
-			xfs_blkdev_put(logdev);
-			xfs_blkdev_put(rtdev);
-			return EINVAL;
-		}
-	}
-
-	/*
-	 * Setup xfs_mount buffer target pointers
-	 */
-	error = ENOMEM;
-	mp->m_ddev_targp = xfs_alloc_buftarg(ddev, 0);
-	if (!mp->m_ddev_targp) {
-		xfs_blkdev_put(logdev);
-		xfs_blkdev_put(rtdev);
-		return error;
-	}
-	if (rtdev) {
-		mp->m_rtdev_targp = xfs_alloc_buftarg(rtdev, 1);
-		if (!mp->m_rtdev_targp) {
-			xfs_blkdev_put(logdev);
-			xfs_blkdev_put(rtdev);
-			goto error0;
-		}
-	}
-	mp->m_logdev_targp = (logdev && logdev != ddev) ?
-				xfs_alloc_buftarg(logdev, 1) : mp->m_ddev_targp;
-	if (!mp->m_logdev_targp) {
-		xfs_blkdev_put(logdev);
-		xfs_blkdev_put(rtdev);
-		goto error0;
-	}
-
-	/*
-	 * Setup flags based on mount(2) options and then the superblock
-	 */
-	error = xfs_start_flags(args, mp);
-	if (error)
-		goto error1;
-	error = xfs_readsb(mp, flags);
-	if (error)
-		goto error1;
-	error = xfs_finish_flags(args, mp);
-	if (error)
-		goto error2;
-
-	/*
-	 * Setup xfs_mount buffer target pointers based on superblock
-	 */
-	error = xfs_setsize_buftarg(mp->m_ddev_targp, mp->m_sb.sb_blocksize,
-				    mp->m_sb.sb_sectsize);
-	if (!error && logdev && logdev != ddev) {
-		unsigned int	log_sector_size = BBSIZE;
-
-		if (xfs_sb_version_hassector(&mp->m_sb))
-			log_sector_size = mp->m_sb.sb_logsectsize;
-		error = xfs_setsize_buftarg(mp->m_logdev_targp,
-					    mp->m_sb.sb_blocksize,
-					    log_sector_size);
-	}
-	if (!error && rtdev)
-		error = xfs_setsize_buftarg(mp->m_rtdev_targp,
-					    mp->m_sb.sb_blocksize,
-					    mp->m_sb.sb_sectsize);
-	if (error)
-		goto error2;
-
-	if (mp->m_flags & XFS_MOUNT_BARRIER)
-		xfs_mountfs_check_barriers(mp);
-
-	if ((error = xfs_filestream_mount(mp)))
-		goto error2;
-
-	error = xfs_mountfs(mp, flags);
-	if (error)
-		goto error2;
-
-	XFS_SEND_MOUNT(mp, DM_RIGHT_NULL, args->mtpt, args->fsname);
-
-	return 0;
-
-error2:
-	if (mp->m_sb_bp)
-		xfs_freesb(mp);
-error1:
-	xfs_binval(mp->m_ddev_targp);
-	if (logdev && logdev != ddev)
-		xfs_binval(mp->m_logdev_targp);
-	if (rtdev)
-		xfs_binval(mp->m_rtdev_targp);
-error0:
-	xfs_unmountfs_close(mp, credp);
-	xfs_qmops_put(mp);
-	xfs_dmops_put(mp);
-	return error;
-}
-
-int
-xfs_unmount(
-	xfs_mount_t	*mp,
-	int		flags,
-	cred_t		*credp)
-{
-	xfs_inode_t	*rip;
-	bhv_vnode_t	*rvp;
-	int		unmount_event_wanted = 0;
-	int		unmount_event_flags = 0;
-	int		xfs_unmountfs_needed = 0;
-	int		error;
-
-	rip = mp->m_rootip;
-	rvp = XFS_ITOV(rip);
-
-#ifdef HAVE_DMAPI
-	if (mp->m_flags & XFS_MOUNT_DMAPI) {
-		error = XFS_SEND_PREUNMOUNT(mp,
-				rip, DM_RIGHT_NULL, rip, DM_RIGHT_NULL,
-				NULL, NULL, 0, 0,
-				(mp->m_dmevmask & (1<<DM_EVENT_PREUNMOUNT))?
-					0:DM_FLAGS_UNWANTED);
-			if (error)
-				return XFS_ERROR(error);
-		unmount_event_wanted = 1;
-		unmount_event_flags = (mp->m_dmevmask & (1<<DM_EVENT_UNMOUNT))?
-					0 : DM_FLAGS_UNWANTED;
-	}
-#endif
-
-	/*
-	 * Blow away any referenced inode in the filestreams cache.
-	 * This can and will cause log traffic as inodes go inactive
-	 * here.
-	 */
-	xfs_filestream_unmount(mp);
-
-	XFS_bflush(mp->m_ddev_targp);
-	error = xfs_unmount_flush(mp, 0);
-	if (error)
-		goto out;
-
-	ASSERT(vn_count(rvp) == 1);
-
-	/*
-	 * Drop the reference count
-	 */
-	IRELE(rip);
-
-	/*
-	 * If we're forcing a shutdown, typically because of a media error,
-	 * we want to make sure we invalidate dirty pages that belong to
-	 * referenced vnodes as well.
-	 */
-	if (XFS_FORCED_SHUTDOWN(mp)) {
-		error = xfs_sync(mp, SYNC_WAIT | SYNC_CLOSE);
-		ASSERT(error != EFSCORRUPTED);
-	}
-	xfs_unmountfs_needed = 1;
-
-out:
-	/*	Send DMAPI event, if required.
-	 *	Then do xfs_unmountfs() if needed.
-	 *	Then return error (or zero).
-	 */
-	if (unmount_event_wanted) {
-		/* Note: mp structure must still exist for
-		 * XFS_SEND_UNMOUNT() call.
-		 */
-		XFS_SEND_UNMOUNT(mp, error == 0 ? rip : NULL,
-			DM_RIGHT_NULL, 0, error, unmount_event_flags);
-	}
-	if (xfs_unmountfs_needed) {
-		/*
-		 * Call common unmount function to flush to disk
-		 * and free the super block buffer & mount structures.
-		 */
-		xfs_unmountfs(mp, credp);
-		xfs_qmops_put(mp);
-		xfs_dmops_put(mp);
-		kmem_free(mp, sizeof(xfs_mount_t));
-	}
-
-	return XFS_ERROR(error);
-}
-
 STATIC void
 xfs_quiesce_fs(
 	xfs_mount_t		*mp)
@@ -694,30 +114,6 @@ xfs_attr_quiesce(
 	xfs_unmountfs_writesb(mp);
 }
 
-int
-xfs_mntupdate(
-	struct xfs_mount		*mp,
-	int				*flags,
-	struct xfs_mount_args		*args)
-{
-	if (!(*flags & MS_RDONLY)) {			/* rw/ro -> rw */
-		if (mp->m_flags & XFS_MOUNT_RDONLY)
-			mp->m_flags &= ~XFS_MOUNT_RDONLY;
-		if (args->flags & XFSMNT_BARRIER) {
-			mp->m_flags |= XFS_MOUNT_BARRIER;
-			xfs_mountfs_check_barriers(mp);
-		} else {
-			mp->m_flags &= ~XFS_MOUNT_BARRIER;
-		}
-	} else if (!(mp->m_flags & XFS_MOUNT_RDONLY)) {	/* rw -> ro */
-		xfs_filestream_flush(mp);
-		xfs_sync(mp, SYNC_DATA_QUIESCE);
-		xfs_attr_quiesce(mp);
-		mp->m_flags |= XFS_MOUNT_RDONLY;
-	}
-	return 0;
-}
-
 /*
  * xfs_unmount_flush implements a set of flush operation on special
  * inodes, which are needed as a separate set of operations so that
@@ -732,7 +128,6 @@ xfs_unmount_flush(
 	xfs_inode_t	*rip = mp->m_rootip;
 	xfs_inode_t	*rbmip;
 	xfs_inode_t	*rsumip = NULL;
-	bhv_vnode_t	*rvp = XFS_ITOV(rip);
 	int		error;
 
 	xfs_ilock(rip, XFS_ILOCK_EXCL | XFS_ILOCK_PARENT);
@@ -750,7 +145,7 @@ xfs_unmount_flush(
 		if (error == EFSCORRUPTED)
 			goto fscorrupt_out;
 
-		ASSERT(vn_count(XFS_ITOV(rbmip)) == 1);
+		ASSERT(vn_count(VFS_I(rbmip)) == 1);
 
 		rsumip = mp->m_rsumip;
 		xfs_ilock(rsumip, XFS_ILOCK_EXCL);
@@ -761,7 +156,7 @@ xfs_unmount_flush(
 		if (error == EFSCORRUPTED)
 			goto fscorrupt_out;
 
-		ASSERT(vn_count(XFS_ITOV(rsumip)) == 1);
+		ASSERT(vn_count(VFS_I(rsumip)) == 1);
 	}
 
 	/*
@@ -771,7 +166,7 @@ xfs_unmount_flush(
 	if (error == EFSCORRUPTED)
 		goto fscorrupt_out2;
 
-	if (vn_count(rvp) != 1 && !relocation) {
+	if (vn_count(VFS_I(rip)) != 1 && !relocation) {
 		xfs_iunlock(rip, XFS_ILOCK_EXCL);
 		return XFS_ERROR(EBUSY);
 	}
@@ -888,7 +283,7 @@ xfs_sync_inodes(
 	int             *bypassed)
 {
 	xfs_inode_t	*ip = NULL;
-	bhv_vnode_t	*vp = NULL;
+	struct inode	*vp = NULL;
 	int		error;
 	int		last_error;
 	uint64_t	fflag;
@@ -1008,7 +403,7 @@ xfs_sync_inodes(
 			continue;
 		}
 
-		vp = XFS_ITOV_NULL(ip);
+		vp = VFS_I(ip);
 
 		/*
 		 * If the vnode is gone then this is being torn down,
@@ -1048,7 +443,7 @@ xfs_sync_inodes(
 
 		if (XFS_FORCED_SHUTDOWN(mp) && !(flags & SYNC_CLOSE)) {
 			XFS_MOUNT_IUNLOCK(mp);
-			kmem_free(ipointer, sizeof(xfs_iptr_t));
+			kmem_free(ipointer);
 			return 0;
 		}
 
@@ -1083,7 +478,7 @@ xfs_sync_inodes(
 			IPOINTER_INSERT(ip, mp);
 			xfs_ilock(ip, lock_flags);
 
-			ASSERT(vp == XFS_ITOV(ip));
+			ASSERT(vp == VFS_I(ip));
 			ASSERT(ip->i_mount == mp);
 
 			vnode_refed = B_TRUE;
@@ -1194,7 +589,7 @@ xfs_sync_inodes(
 			}
 			XFS_MOUNT_IUNLOCK(mp);
 			ASSERT(ipointer_in == B_FALSE);
-			kmem_free(ipointer, sizeof(xfs_iptr_t));
+			kmem_free(ipointer);
 			return XFS_ERROR(error);
 		}
 
@@ -1224,7 +619,7 @@ xfs_sync_inodes(
 
 	ASSERT(ipointer_in == B_FALSE);
 
-	kmem_free(ipointer, sizeof(xfs_iptr_t));
+	kmem_free(ipointer);
 	return XFS_ERROR(last_error);
 }
 
diff --git a/fs/xfs/xfs_vfsops.h b/fs/xfs/xfs_vfsops.h
index 1688817c55ed..a74b05087da4 100644
--- a/fs/xfs/xfs_vfsops.h
+++ b/fs/xfs/xfs_vfsops.h
@@ -8,11 +8,6 @@ struct kstatfs;
 struct xfs_mount;
 struct xfs_mount_args;
 
-int xfs_mount(struct xfs_mount *mp, struct xfs_mount_args *args,
-		struct cred *credp);
-int xfs_unmount(struct xfs_mount *mp, int flags, struct cred *credp);
-int xfs_mntupdate(struct xfs_mount *mp, int *flags,
-		struct xfs_mount_args *args);
 int xfs_sync(struct xfs_mount *mp, int flags);
 void xfs_do_force_shutdown(struct xfs_mount *mp, int flags, char *fname,
 		int lnnum);
diff --git a/fs/xfs/xfs_vnodeops.c b/fs/xfs/xfs_vnodeops.c
index e475e3717eb3..aa238c8fbd7a 100644
--- a/fs/xfs/xfs_vnodeops.c
+++ b/fs/xfs/xfs_vnodeops.c
@@ -75,26 +75,23 @@ xfs_open(
 	return 0;
 }
 
-/*
- * xfs_setattr
- */
 int
 xfs_setattr(
-	xfs_inode_t		*ip,
-	bhv_vattr_t		*vap,
+	struct xfs_inode	*ip,
+	struct iattr		*iattr,
 	int			flags,
 	cred_t			*credp)
 {
 	xfs_mount_t		*mp = ip->i_mount;
+	struct inode		*inode = VFS_I(ip);
+	int			mask = iattr->ia_valid;
 	xfs_trans_t		*tp;
-	int			mask;
 	int			code;
 	uint			lock_flags;
 	uint			commit_flags=0;
 	uid_t			uid=0, iuid=0;
 	gid_t			gid=0, igid=0;
 	int			timeflags = 0;
-	xfs_prid_t		projid=0, iprojid=0;
 	struct xfs_dquot	*udqp, *gdqp, *olddquot1, *olddquot2;
 	int			file_owner;
 	int			need_iolock = 1;
@@ -104,30 +101,9 @@ xfs_setattr(
 	if (mp->m_flags & XFS_MOUNT_RDONLY)
 		return XFS_ERROR(EROFS);
 
-	/*
-	 * Cannot set certain attributes.
-	 */
-	mask = vap->va_mask;
-	if (mask & XFS_AT_NOSET) {
-		return XFS_ERROR(EINVAL);
-	}
-
 	if (XFS_FORCED_SHUTDOWN(mp))
 		return XFS_ERROR(EIO);
 
-	/*
-	 * Timestamps do not need to be logged and hence do not
-	 * need to be done within a transaction.
-	 */
-	if (mask & XFS_AT_UPDTIMES) {
-		ASSERT((mask & ~XFS_AT_UPDTIMES) == 0);
-		timeflags = ((mask & XFS_AT_UPDATIME) ? XFS_ICHGTIME_ACC : 0) |
-			    ((mask & XFS_AT_UPDCTIME) ? XFS_ICHGTIME_CHG : 0) |
-			    ((mask & XFS_AT_UPDMTIME) ? XFS_ICHGTIME_MOD : 0);
-		xfs_ichgtime(ip, timeflags);
-		return 0;
-	}
-
 	olddquot1 = olddquot2 = NULL;
 	udqp = gdqp = NULL;
 
@@ -139,28 +115,22 @@ xfs_setattr(
 	 * If the IDs do change before we take the ilock, we're covered
 	 * because the i_*dquot fields will get updated anyway.
 	 */
-	if (XFS_IS_QUOTA_ON(mp) &&
-	    (mask & (XFS_AT_UID|XFS_AT_GID|XFS_AT_PROJID))) {
+	if (XFS_IS_QUOTA_ON(mp) && (mask & (ATTR_UID|ATTR_GID))) {
 		uint	qflags = 0;
 
-		if ((mask & XFS_AT_UID) && XFS_IS_UQUOTA_ON(mp)) {
-			uid = vap->va_uid;
+		if ((mask & ATTR_UID) && XFS_IS_UQUOTA_ON(mp)) {
+			uid = iattr->ia_uid;
 			qflags |= XFS_QMOPT_UQUOTA;
 		} else {
 			uid = ip->i_d.di_uid;
 		}
-		if ((mask & XFS_AT_GID) && XFS_IS_GQUOTA_ON(mp)) {
-			gid = vap->va_gid;
+		if ((mask & ATTR_GID) && XFS_IS_GQUOTA_ON(mp)) {
+			gid = iattr->ia_gid;
 			qflags |= XFS_QMOPT_GQUOTA;
 		}  else {
 			gid = ip->i_d.di_gid;
 		}
-		if ((mask & XFS_AT_PROJID) && XFS_IS_PQUOTA_ON(mp)) {
-			projid = vap->va_projid;
-			qflags |= XFS_QMOPT_PQUOTA;
-		}  else {
-			projid = ip->i_d.di_projid;
-		}
+
 		/*
 		 * We take a reference when we initialize udqp and gdqp,
 		 * so it is important that we never blindly double trip on
@@ -168,8 +138,8 @@ xfs_setattr(
 		 */
 		ASSERT(udqp == NULL);
 		ASSERT(gdqp == NULL);
-		code = XFS_QM_DQVOPALLOC(mp, ip, uid, gid, projid, qflags,
-					 &udqp, &gdqp);
+		code = XFS_QM_DQVOPALLOC(mp, ip, uid, gid, ip->i_d.di_projid,
+					 qflags, &udqp, &gdqp);
 		if (code)
 			return code;
 	}
@@ -180,10 +150,10 @@ xfs_setattr(
 	 */
 	tp = NULL;
 	lock_flags = XFS_ILOCK_EXCL;
-	if (flags & ATTR_NOLOCK)
+	if (flags & XFS_ATTR_NOLOCK)
 		need_iolock = 0;
-	if (!(mask & XFS_AT_SIZE)) {
-		if ((mask != (XFS_AT_CTIME|XFS_AT_ATIME|XFS_AT_MTIME)) ||
+	if (!(mask & ATTR_SIZE)) {
+		if ((mask != (ATTR_CTIME|ATTR_ATIME|ATTR_MTIME)) ||
 		    (mp->m_flags & XFS_MOUNT_WSYNC)) {
 			tp = xfs_trans_alloc(mp, XFS_TRANS_SETATTR_NOT_SIZE);
 			commit_flags = 0;
@@ -196,10 +166,10 @@ xfs_setattr(
 		}
 	} else {
 		if (DM_EVENT_ENABLED(ip, DM_EVENT_TRUNCATE) &&
-		    !(flags & ATTR_DMI)) {
+		    !(flags & XFS_ATTR_DMI)) {
 			int dmflags = AT_DELAY_FLAG(flags) | DM_SEM_FLAG_WR;
 			code = XFS_SEND_DATA(mp, DM_EVENT_TRUNCATE, ip,
-				vap->va_size, 0, dmflags, NULL);
+				iattr->ia_size, 0, dmflags, NULL);
 			if (code) {
 				lock_flags = 0;
 				goto error_return;
@@ -212,16 +182,14 @@ xfs_setattr(
 	xfs_ilock(ip, lock_flags);
 
 	/* boolean: are we the file owner? */
-	file_owner = (current_fsuid(credp) == ip->i_d.di_uid);
+	file_owner = (current_fsuid() == ip->i_d.di_uid);
 
 	/*
 	 * Change various properties of a file.
 	 * Only the owner or users with CAP_FOWNER
 	 * capability may do these things.
 	 */
-	if (mask &
-	    (XFS_AT_MODE|XFS_AT_XFLAGS|XFS_AT_EXTSIZE|XFS_AT_UID|
-	     XFS_AT_GID|XFS_AT_PROJID)) {
+	if (mask & (ATTR_MODE|ATTR_UID|ATTR_GID)) {
 		/*
 		 * CAP_FOWNER overrides the following restrictions:
 		 *
@@ -245,21 +213,21 @@ xfs_setattr(
 		 * IDs of the calling process shall match the group owner of
 		 * the file when setting the set-group-ID bit on that file
 		 */
-		if (mask & XFS_AT_MODE) {
+		if (mask & ATTR_MODE) {
 			mode_t m = 0;
 
-			if ((vap->va_mode & S_ISUID) && !file_owner)
+			if ((iattr->ia_mode & S_ISUID) && !file_owner)
 				m |= S_ISUID;
-			if ((vap->va_mode & S_ISGID) &&
+			if ((iattr->ia_mode & S_ISGID) &&
 			    !in_group_p((gid_t)ip->i_d.di_gid))
 				m |= S_ISGID;
 #if 0
 			/* Linux allows this, Irix doesn't. */
-			if ((vap->va_mode & S_ISVTX) && !S_ISDIR(ip->i_d.di_mode))
+			if ((iattr->ia_mode & S_ISVTX) && !S_ISDIR(ip->i_d.di_mode))
 				m |= S_ISVTX;
 #endif
 			if (m && !capable(CAP_FSETID))
-				vap->va_mode &= ~m;
+				iattr->ia_mode &= ~m;
 		}
 	}
 
@@ -270,7 +238,7 @@ xfs_setattr(
 	 * and can change the group id only to a group of which he
 	 * or she is a member.
 	 */
-	if (mask & (XFS_AT_UID|XFS_AT_GID|XFS_AT_PROJID)) {
+	if (mask & (ATTR_UID|ATTR_GID)) {
 		/*
 		 * These IDs could have changed since we last looked at them.
 		 * But, we're assured that if the ownership did change
@@ -278,12 +246,9 @@ xfs_setattr(
 		 * would have changed also.
 		 */
 		iuid = ip->i_d.di_uid;
-		iprojid = ip->i_d.di_projid;
 		igid = ip->i_d.di_gid;
-		gid = (mask & XFS_AT_GID) ? vap->va_gid : igid;
-		uid = (mask & XFS_AT_UID) ? vap->va_uid : iuid;
-		projid = (mask & XFS_AT_PROJID) ? (xfs_prid_t)vap->va_projid :
-			 iprojid;
+		gid = (mask & ATTR_GID) ? iattr->ia_gid : igid;
+		uid = (mask & ATTR_UID) ? iattr->ia_uid : iuid;
 
 		/*
 		 * CAP_CHOWN overrides the following restrictions:
@@ -303,11 +268,10 @@ xfs_setattr(
 			goto error_return;
 		}
 		/*
-		 * Do a quota reservation only if uid/projid/gid is actually
+		 * Do a quota reservation only if uid/gid is actually
 		 * going to change.
 		 */
 		if ((XFS_IS_UQUOTA_ON(mp) && iuid != uid) ||
-		    (XFS_IS_PQUOTA_ON(mp) && iprojid != projid) ||
 		    (XFS_IS_GQUOTA_ON(mp) && igid != gid)) {
 			ASSERT(tp);
 			code = XFS_QM_DQVOPCHOWNRESV(mp, tp, ip, udqp, gdqp,
@@ -321,13 +285,13 @@ xfs_setattr(
 	/*
 	 * Truncate file.  Must have write permission and not be a directory.
 	 */
-	if (mask & XFS_AT_SIZE) {
+	if (mask & ATTR_SIZE) {
 		/* Short circuit the truncate case for zero length files */
-		if ((vap->va_size == 0) &&
-		   (ip->i_size == 0) && (ip->i_d.di_nextents == 0)) {
+		if (iattr->ia_size == 0 &&
+		    ip->i_size == 0 && ip->i_d.di_nextents == 0) {
 			xfs_iunlock(ip, XFS_ILOCK_EXCL);
 			lock_flags &= ~XFS_ILOCK_EXCL;
-			if (mask & XFS_AT_CTIME)
+			if (mask & ATTR_CTIME)
 				xfs_ichgtime(ip, XFS_ICHGTIME_MOD | XFS_ICHGTIME_CHG);
 			code = 0;
 			goto error_return;
@@ -350,9 +314,9 @@ xfs_setattr(
 	/*
 	 * Change file access or modified times.
 	 */
-	if (mask & (XFS_AT_ATIME|XFS_AT_MTIME)) {
+	if (mask & (ATTR_ATIME|ATTR_MTIME)) {
 		if (!file_owner) {
-			if ((flags & ATTR_UTIME) &&
+			if ((mask & (ATTR_MTIME_SET|ATTR_ATIME_SET)) &&
 			    !capable(CAP_FOWNER)) {
 				code = XFS_ERROR(EPERM);
 				goto error_return;
@@ -361,90 +325,23 @@ xfs_setattr(
 	}
 
 	/*
-	 * Change extent size or realtime flag.
-	 */
-	if (mask & (XFS_AT_EXTSIZE|XFS_AT_XFLAGS)) {
-		/*
-		 * Can't change extent size if any extents are allocated.
-		 */
-		if (ip->i_d.di_nextents && (mask & XFS_AT_EXTSIZE) &&
-		    ((ip->i_d.di_extsize << mp->m_sb.sb_blocklog) !=
-		     vap->va_extsize) ) {
-			code = XFS_ERROR(EINVAL);	/* EFBIG? */
-			goto error_return;
-		}
-
-		/*
-		 * Can't change realtime flag if any extents are allocated.
-		 */
-		if ((ip->i_d.di_nextents || ip->i_delayed_blks) &&
-		    (mask & XFS_AT_XFLAGS) &&
-		    (XFS_IS_REALTIME_INODE(ip)) !=
-		    (vap->va_xflags & XFS_XFLAG_REALTIME)) {
-			code = XFS_ERROR(EINVAL);	/* EFBIG? */
-			goto error_return;
-		}
-		/*
-		 * Extent size must be a multiple of the appropriate block
-		 * size, if set at all.
-		 */
-		if ((mask & XFS_AT_EXTSIZE) && vap->va_extsize != 0) {
-			xfs_extlen_t	size;
-
-			if (XFS_IS_REALTIME_INODE(ip) ||
-			    ((mask & XFS_AT_XFLAGS) &&
-			    (vap->va_xflags & XFS_XFLAG_REALTIME))) {
-				size = mp->m_sb.sb_rextsize <<
-				       mp->m_sb.sb_blocklog;
-			} else {
-				size = mp->m_sb.sb_blocksize;
-			}
-			if (vap->va_extsize % size) {
-				code = XFS_ERROR(EINVAL);
-				goto error_return;
-			}
-		}
-		/*
-		 * If realtime flag is set then must have realtime data.
-		 */
-		if ((mask & XFS_AT_XFLAGS) &&
-		    (vap->va_xflags & XFS_XFLAG_REALTIME)) {
-			if ((mp->m_sb.sb_rblocks == 0) ||
-			    (mp->m_sb.sb_rextsize == 0) ||
-			    (ip->i_d.di_extsize % mp->m_sb.sb_rextsize)) {
-				code = XFS_ERROR(EINVAL);
-				goto error_return;
-			}
-		}
-
-		/*
-		 * Can't modify an immutable/append-only file unless
-		 * we have appropriate permission.
-		 */
-		if ((mask & XFS_AT_XFLAGS) &&
-		    (ip->i_d.di_flags &
-				(XFS_DIFLAG_IMMUTABLE|XFS_DIFLAG_APPEND) ||
-		     (vap->va_xflags &
-				(XFS_XFLAG_IMMUTABLE | XFS_XFLAG_APPEND))) &&
-		    !capable(CAP_LINUX_IMMUTABLE)) {
-			code = XFS_ERROR(EPERM);
-			goto error_return;
-		}
-	}
-
-	/*
 	 * Now we can make the changes.  Before we join the inode
-	 * to the transaction, if XFS_AT_SIZE is set then take care of
+	 * to the transaction, if ATTR_SIZE is set then take care of
 	 * the part of the truncation that must be done without the
 	 * inode lock.  This needs to be done before joining the inode
 	 * to the transaction, because the inode cannot be unlocked
 	 * once it is a part of the transaction.
 	 */
-	if (mask & XFS_AT_SIZE) {
+	if (mask & ATTR_SIZE) {
 		code = 0;
-		if ((vap->va_size > ip->i_size) &&
-		    (flags & ATTR_NOSIZETOK) == 0) {
-			code = xfs_igrow_start(ip, vap->va_size, credp);
+		if (iattr->ia_size > ip->i_size) {
+			/*
+			 * Do the first part of growing a file: zero any data
+			 * in the last block that is beyond the old EOF.  We
+			 * need to do this before the inode is joined to the
+			 * transaction to modify the i_size.
+			 */
+			code = xfs_zero_eof(ip, iattr->ia_size, ip->i_size);
 		}
 		xfs_iunlock(ip, XFS_ILOCK_EXCL);
 
@@ -461,10 +358,10 @@ xfs_setattr(
 		 * not within the range we care about here.
 		 */
 		if (!code &&
-		    (ip->i_size != ip->i_d.di_size) &&
-		    (vap->va_size > ip->i_d.di_size)) {
+		    ip->i_size != ip->i_d.di_size &&
+		    iattr->ia_size > ip->i_d.di_size) {
 			code = xfs_flush_pages(ip,
-					ip->i_d.di_size, vap->va_size,
+					ip->i_d.di_size, iattr->ia_size,
 					XFS_B_ASYNC, FI_NONE);
 		}
 
@@ -472,7 +369,7 @@ xfs_setattr(
 		vn_iowait(ip);
 
 		if (!code)
-			code = xfs_itruncate_data(ip, vap->va_size);
+			code = xfs_itruncate_data(ip, iattr->ia_size);
 		if (code) {
 			ASSERT(tp == NULL);
 			lock_flags &= ~XFS_ILOCK_EXCL;
@@ -501,28 +398,30 @@ xfs_setattr(
 	/*
 	 * Truncate file.  Must have write permission and not be a directory.
 	 */
-	if (mask & XFS_AT_SIZE) {
+	if (mask & ATTR_SIZE) {
 		/*
 		 * Only change the c/mtime if we are changing the size
 		 * or we are explicitly asked to change it. This handles
 		 * the semantic difference between truncate() and ftruncate()
 		 * as implemented in the VFS.
 		 */
-		if (vap->va_size != ip->i_size || (mask & XFS_AT_CTIME))
+		if (iattr->ia_size != ip->i_size || (mask & ATTR_CTIME))
 			timeflags |= XFS_ICHGTIME_MOD | XFS_ICHGTIME_CHG;
 
-		if (vap->va_size > ip->i_size) {
-			xfs_igrow_finish(tp, ip, vap->va_size,
-			    !(flags & ATTR_DMI));
-		} else if ((vap->va_size <= ip->i_size) ||
-			   ((vap->va_size == 0) && ip->i_d.di_nextents)) {
+		if (iattr->ia_size > ip->i_size) {
+			ip->i_d.di_size = iattr->ia_size;
+			ip->i_size = iattr->ia_size;
+			if (!(flags & XFS_ATTR_DMI))
+				xfs_ichgtime(ip, XFS_ICHGTIME_CHG);
+			xfs_trans_log_inode(tp, ip, XFS_ILOG_CORE);
+		} else if (iattr->ia_size <= ip->i_size ||
+			   (iattr->ia_size == 0 && ip->i_d.di_nextents)) {
 			/*
 			 * signal a sync transaction unless
 			 * we're truncating an already unlinked
 			 * file on a wsync filesystem
 			 */
-			code = xfs_itruncate_finish(&tp, ip,
-					    (xfs_fsize_t)vap->va_size,
+			code = xfs_itruncate_finish(&tp, ip, iattr->ia_size,
 					    XFS_DATA_FORK,
 					    ((ip->i_d.di_nlink != 0 ||
 					      !(mp->m_flags & XFS_MOUNT_WSYNC))
@@ -544,9 +443,12 @@ xfs_setattr(
 	/*
 	 * Change file access modes.
 	 */
-	if (mask & XFS_AT_MODE) {
+	if (mask & ATTR_MODE) {
 		ip->i_d.di_mode &= S_IFMT;
-		ip->i_d.di_mode |= vap->va_mode & ~S_IFMT;
+		ip->i_d.di_mode |= iattr->ia_mode & ~S_IFMT;
+
+		inode->i_mode &= S_IFMT;
+		inode->i_mode |= iattr->ia_mode & ~S_IFMT;
 
 		xfs_trans_log_inode (tp, ip, XFS_ILOG_CORE);
 		timeflags |= XFS_ICHGTIME_CHG;
@@ -559,7 +461,7 @@ xfs_setattr(
 	 * and can change the group id only to a group of which he
 	 * or she is a member.
 	 */
-	if (mask & (XFS_AT_UID|XFS_AT_GID|XFS_AT_PROJID)) {
+	if (mask & (ATTR_UID|ATTR_GID)) {
 		/*
 		 * CAP_FSETID overrides the following restrictions:
 		 *
@@ -577,39 +479,24 @@ xfs_setattr(
 		 */
 		if (iuid != uid) {
 			if (XFS_IS_UQUOTA_ON(mp)) {
-				ASSERT(mask & XFS_AT_UID);
+				ASSERT(mask & ATTR_UID);
 				ASSERT(udqp);
 				olddquot1 = XFS_QM_DQVOPCHOWN(mp, tp, ip,
 							&ip->i_udquot, udqp);
 			}
 			ip->i_d.di_uid = uid;
+			inode->i_uid = uid;
 		}
 		if (igid != gid) {
 			if (XFS_IS_GQUOTA_ON(mp)) {
 				ASSERT(!XFS_IS_PQUOTA_ON(mp));
-				ASSERT(mask & XFS_AT_GID);
+				ASSERT(mask & ATTR_GID);
 				ASSERT(gdqp);
 				olddquot2 = XFS_QM_DQVOPCHOWN(mp, tp, ip,
 							&ip->i_gdquot, gdqp);
 			}
 			ip->i_d.di_gid = gid;
-		}
-		if (iprojid != projid) {
-			if (XFS_IS_PQUOTA_ON(mp)) {
-				ASSERT(!XFS_IS_GQUOTA_ON(mp));
-				ASSERT(mask & XFS_AT_PROJID);
-				ASSERT(gdqp);
-				olddquot2 = XFS_QM_DQVOPCHOWN(mp, tp, ip,
-							&ip->i_gdquot, gdqp);
-			}
-			ip->i_d.di_projid = projid;
-			/*
-			 * We may have to rev the inode as well as
-			 * the superblock version number since projids didn't
-			 * exist before DINODE_VERSION_2 and SB_VERSION_NLINK.
-			 */
-			if (ip->i_d.di_version == XFS_DINODE_VERSION_1)
-				xfs_bump_ino_vers2(tp, ip);
+			inode->i_gid = gid;
 		}
 
 		xfs_trans_log_inode (tp, ip, XFS_ILOG_CORE);
@@ -620,82 +507,33 @@ xfs_setattr(
 	/*
 	 * Change file access or modified times.
 	 */
-	if (mask & (XFS_AT_ATIME|XFS_AT_MTIME)) {
-		if (mask & XFS_AT_ATIME) {
-			ip->i_d.di_atime.t_sec = vap->va_atime.tv_sec;
-			ip->i_d.di_atime.t_nsec = vap->va_atime.tv_nsec;
+	if (mask & (ATTR_ATIME|ATTR_MTIME)) {
+		if (mask & ATTR_ATIME) {
+			inode->i_atime = iattr->ia_atime;
+			ip->i_d.di_atime.t_sec = iattr->ia_atime.tv_sec;
+			ip->i_d.di_atime.t_nsec = iattr->ia_atime.tv_nsec;
 			ip->i_update_core = 1;
-			timeflags &= ~XFS_ICHGTIME_ACC;
 		}
-		if (mask & XFS_AT_MTIME) {
-			ip->i_d.di_mtime.t_sec = vap->va_mtime.tv_sec;
-			ip->i_d.di_mtime.t_nsec = vap->va_mtime.tv_nsec;
+		if (mask & ATTR_MTIME) {
+			inode->i_mtime = iattr->ia_mtime;
+			ip->i_d.di_mtime.t_sec = iattr->ia_mtime.tv_sec;
+			ip->i_d.di_mtime.t_nsec = iattr->ia_mtime.tv_nsec;
 			timeflags &= ~XFS_ICHGTIME_MOD;
 			timeflags |= XFS_ICHGTIME_CHG;
 		}
-		if (tp && (flags & ATTR_UTIME))
+		if (tp && (mask & (ATTR_MTIME_SET|ATTR_ATIME_SET)))
 			xfs_trans_log_inode (tp, ip, XFS_ILOG_CORE);
 	}
 
 	/*
-	 * Change XFS-added attributes.
-	 */
-	if (mask & (XFS_AT_EXTSIZE|XFS_AT_XFLAGS)) {
-		if (mask & XFS_AT_EXTSIZE) {
-			/*
-			 * Converting bytes to fs blocks.
-			 */
-			ip->i_d.di_extsize = vap->va_extsize >>
-				mp->m_sb.sb_blocklog;
-		}
-		if (mask & XFS_AT_XFLAGS) {
-			uint	di_flags;
-
-			/* can't set PREALLOC this way, just preserve it */
-			di_flags = (ip->i_d.di_flags & XFS_DIFLAG_PREALLOC);
-			if (vap->va_xflags & XFS_XFLAG_IMMUTABLE)
-				di_flags |= XFS_DIFLAG_IMMUTABLE;
-			if (vap->va_xflags & XFS_XFLAG_APPEND)
-				di_flags |= XFS_DIFLAG_APPEND;
-			if (vap->va_xflags & XFS_XFLAG_SYNC)
-				di_flags |= XFS_DIFLAG_SYNC;
-			if (vap->va_xflags & XFS_XFLAG_NOATIME)
-				di_flags |= XFS_DIFLAG_NOATIME;
-			if (vap->va_xflags & XFS_XFLAG_NODUMP)
-				di_flags |= XFS_DIFLAG_NODUMP;
-			if (vap->va_xflags & XFS_XFLAG_PROJINHERIT)
-				di_flags |= XFS_DIFLAG_PROJINHERIT;
-			if (vap->va_xflags & XFS_XFLAG_NODEFRAG)
-				di_flags |= XFS_DIFLAG_NODEFRAG;
-			if (vap->va_xflags & XFS_XFLAG_FILESTREAM)
-				di_flags |= XFS_DIFLAG_FILESTREAM;
-			if ((ip->i_d.di_mode & S_IFMT) == S_IFDIR) {
-				if (vap->va_xflags & XFS_XFLAG_RTINHERIT)
-					di_flags |= XFS_DIFLAG_RTINHERIT;
-				if (vap->va_xflags & XFS_XFLAG_NOSYMLINKS)
-					di_flags |= XFS_DIFLAG_NOSYMLINKS;
-				if (vap->va_xflags & XFS_XFLAG_EXTSZINHERIT)
-					di_flags |= XFS_DIFLAG_EXTSZINHERIT;
-			} else if ((ip->i_d.di_mode & S_IFMT) == S_IFREG) {
-				if (vap->va_xflags & XFS_XFLAG_REALTIME)
-					di_flags |= XFS_DIFLAG_REALTIME;
-				if (vap->va_xflags & XFS_XFLAG_EXTSIZE)
-					di_flags |= XFS_DIFLAG_EXTSIZE;
-			}
-			ip->i_d.di_flags = di_flags;
-		}
-		xfs_trans_log_inode(tp, ip, XFS_ILOG_CORE);
-		timeflags |= XFS_ICHGTIME_CHG;
-	}
-
-	/*
-	 * Change file inode change time only if XFS_AT_CTIME set
+	 * Change file inode change time only if ATTR_CTIME set
 	 * AND we have been called by a DMI function.
 	 */
 
-	if ( (flags & ATTR_DMI) && (mask & XFS_AT_CTIME) ) {
-		ip->i_d.di_ctime.t_sec = vap->va_ctime.tv_sec;
-		ip->i_d.di_ctime.t_nsec = vap->va_ctime.tv_nsec;
+	if ((flags & XFS_ATTR_DMI) && (mask & ATTR_CTIME)) {
+		inode->i_ctime = iattr->ia_ctime;
+		ip->i_d.di_ctime.t_sec = iattr->ia_ctime.tv_sec;
+		ip->i_d.di_ctime.t_nsec = iattr->ia_ctime.tv_nsec;
 		ip->i_update_core = 1;
 		timeflags &= ~XFS_ICHGTIME_CHG;
 	}
@@ -704,7 +542,7 @@ xfs_setattr(
 	 * Send out timestamp changes that need to be set to the
 	 * current time.  Not done when called by a DMI function.
 	 */
-	if (timeflags && !(flags & ATTR_DMI))
+	if (timeflags && !(flags & XFS_ATTR_DMI))
 		xfs_ichgtime(ip, timeflags);
 
 	XFS_STATS_INC(xs_ig_attrchg);
@@ -742,7 +580,7 @@ xfs_setattr(
 	}
 
 	if (DM_EVENT_ENABLED(ip, DM_EVENT_ATTRIBUTE) &&
-	    !(flags & ATTR_DMI)) {
+	    !(flags & XFS_ATTR_DMI)) {
 		(void) XFS_SEND_NAMESP(mp, DM_EVENT_ATTRIBUTE, ip, DM_RIGHT_NULL,
 					NULL, DM_RIGHT_NULL, NULL, NULL,
 					0, 0, AT_DELAY_FLAG(flags));
@@ -875,7 +713,7 @@ xfs_fsync(
 		return XFS_ERROR(EIO);
 
 	/* capture size updates in I/O completion before writing the inode. */
-	error = filemap_fdatawait(vn_to_inode(XFS_ITOV(ip))->i_mapping);
+	error = filemap_fdatawait(VFS_I(ip)->i_mapping);
 	if (error)
 		return XFS_ERROR(error);
 
@@ -1321,7 +1159,6 @@ int
 xfs_release(
 	xfs_inode_t	*ip)
 {
-	bhv_vnode_t	*vp = XFS_ITOV(ip);
 	xfs_mount_t	*mp = ip->i_mount;
 	int		error;
 
@@ -1356,13 +1193,13 @@ xfs_release(
 		 * be exposed to that problem.
 		 */
 		truncated = xfs_iflags_test_and_clear(ip, XFS_ITRUNCATED);
-		if (truncated && VN_DIRTY(vp) && ip->i_delayed_blks > 0)
+		if (truncated && VN_DIRTY(VFS_I(ip)) && ip->i_delayed_blks > 0)
 			xfs_flush_pages(ip, 0, -1, XFS_B_ASYNC, FI_NONE);
 	}
 
 	if (ip->i_d.di_nlink != 0) {
 		if ((((ip->i_d.di_mode & S_IFMT) == S_IFREG) &&
-		     ((ip->i_size > 0) || (VN_CACHED(vp) > 0 ||
+		     ((ip->i_size > 0) || (VN_CACHED(VFS_I(ip)) > 0 ||
 		       ip->i_delayed_blks > 0)) &&
 		     (ip->i_df.if_flags & XFS_IFEXTENTS))  &&
 		    (!(ip->i_d.di_flags &
@@ -1388,7 +1225,6 @@ int
 xfs_inactive(
 	xfs_inode_t	*ip)
 {
-	bhv_vnode_t	*vp = XFS_ITOV(ip);
 	xfs_bmap_free_t	free_list;
 	xfs_fsblock_t	first_block;
 	int		committed;
@@ -1403,7 +1239,7 @@ xfs_inactive(
 	 * If the inode is already free, then there can be nothing
 	 * to clean up here.
 	 */
-	if (ip->i_d.di_mode == 0 || VN_BAD(vp)) {
+	if (ip->i_d.di_mode == 0 || VN_BAD(VFS_I(ip))) {
 		ASSERT(ip->i_df.if_real_bytes == 0);
 		ASSERT(ip->i_df.if_broot_bytes == 0);
 		return VN_INACTIVE_CACHE;
@@ -1433,7 +1269,7 @@ xfs_inactive(
 
 	if (ip->i_d.di_nlink != 0) {
 		if ((((ip->i_d.di_mode & S_IFMT) == S_IFREG) &&
-                     ((ip->i_size > 0) || (VN_CACHED(vp) > 0 ||
+                     ((ip->i_size > 0) || (VN_CACHED(VFS_I(ip)) > 0 ||
                        ip->i_delayed_blks > 0)) &&
 		      (ip->i_df.if_flags & XFS_IFEXTENTS) &&
 		     (!(ip->i_d.di_flags &
@@ -1601,12 +1437,18 @@ xfs_inactive(
 	return VN_INACTIVE_CACHE;
 }
 
-
+/*
+ * Lookups up an inode from "name". If ci_name is not NULL, then a CI match
+ * is allowed, otherwise it has to be an exact match. If a CI match is found,
+ * ci_name->name will point to a the actual name (caller must free) or
+ * will be set to NULL if an exact match is found.
+ */
 int
 xfs_lookup(
 	xfs_inode_t		*dp,
 	struct xfs_name		*name,
-	xfs_inode_t		**ipp)
+	xfs_inode_t		**ipp,
+	struct xfs_name		*ci_name)
 {
 	xfs_ino_t		inum;
 	int			error;
@@ -1618,7 +1460,7 @@ xfs_lookup(
 		return XFS_ERROR(EIO);
 
 	lock_mode = xfs_ilock_map_shared(dp);
-	error = xfs_dir_lookup(NULL, dp, name, &inum);
+	error = xfs_dir_lookup(NULL, dp, name, &inum, ci_name);
 	xfs_iunlock_map_shared(dp, lock_mode);
 
 	if (error)
@@ -1626,12 +1468,15 @@ xfs_lookup(
 
 	error = xfs_iget(dp->i_mount, NULL, inum, 0, 0, ipp, 0);
 	if (error)
-		goto out;
+		goto out_free_name;
 
 	xfs_itrace_ref(*ipp);
 	return 0;
 
- out:
+out_free_name:
+	if (ci_name)
+		kmem_free(ci_name->name);
+out:
 	*ipp = NULL;
 	return error;
 }
@@ -1688,7 +1533,7 @@ xfs_create(
 	 * Make sure that we have allocated dquot(s) on disk.
 	 */
 	error = XFS_QM_DQVOPALLOC(mp, dp,
-			current_fsuid(credp), current_fsgid(credp), prid,
+			current_fsuid(), current_fsgid(), prid,
 			XFS_QMOPT_QUOTALL|XFS_QMOPT_INHERIT, &udqp, &gdqp);
 	if (error)
 		goto std_return;
@@ -1860,111 +1705,6 @@ std_return:
 }
 
 #ifdef DEBUG
-/*
- * Some counters to see if (and how often) we are hitting some deadlock
- * prevention code paths.
- */
-
-int xfs_rm_locks;
-int xfs_rm_lock_delays;
-int xfs_rm_attempts;
-#endif
-
-/*
- * The following routine will lock the inodes associated with the
- * directory and the named entry in the directory. The locks are
- * acquired in increasing inode number.
- *
- * If the entry is "..", then only the directory is locked. The
- * vnode ref count will still include that from the .. entry in
- * this case.
- *
- * There is a deadlock we need to worry about. If the locked directory is
- * in the AIL, it might be blocking up the log. The next inode we lock
- * could be already locked by another thread waiting for log space (e.g
- * a permanent log reservation with a long running transaction (see
- * xfs_itruncate_finish)). To solve this, we must check if the directory
- * is in the ail and use lock_nowait. If we can't lock, we need to
- * drop the inode lock on the directory and try again. xfs_iunlock will
- * potentially push the tail if we were holding up the log.
- */
-STATIC int
-xfs_lock_dir_and_entry(
-	xfs_inode_t	*dp,
-	xfs_inode_t	*ip)	/* inode of entry 'name' */
-{
-	int		attempts;
-	xfs_ino_t	e_inum;
-	xfs_inode_t	*ips[2];
-	xfs_log_item_t	*lp;
-
-#ifdef DEBUG
-	xfs_rm_locks++;
-#endif
-	attempts = 0;
-
-again:
-	xfs_ilock(dp, XFS_ILOCK_EXCL | XFS_ILOCK_PARENT);
-
-	e_inum = ip->i_ino;
-
-	xfs_itrace_ref(ip);
-
-	/*
-	 * We want to lock in increasing inum. Since we've already
-	 * acquired the lock on the directory, we may need to release
-	 * if if the inum of the entry turns out to be less.
-	 */
-	if (e_inum > dp->i_ino) {
-		/*
-		 * We are already in the right order, so just
-		 * lock on the inode of the entry.
-		 * We need to use nowait if dp is in the AIL.
-		 */
-
-		lp = (xfs_log_item_t *)dp->i_itemp;
-		if (lp && (lp->li_flags & XFS_LI_IN_AIL)) {
-			if (!xfs_ilock_nowait(ip, XFS_ILOCK_EXCL)) {
-				attempts++;
-#ifdef DEBUG
-				xfs_rm_attempts++;
-#endif
-
-				/*
-				 * Unlock dp and try again.
-				 * xfs_iunlock will try to push the tail
-				 * if the inode is in the AIL.
-				 */
-
-				xfs_iunlock(dp, XFS_ILOCK_EXCL);
-
-				if ((attempts % 5) == 0) {
-					delay(1); /* Don't just spin the CPU */
-#ifdef DEBUG
-					xfs_rm_lock_delays++;
-#endif
-				}
-				goto again;
-			}
-		} else {
-			xfs_ilock(ip, XFS_ILOCK_EXCL);
-		}
-	} else if (e_inum < dp->i_ino) {
-		xfs_iunlock(dp, XFS_ILOCK_EXCL);
-
-		ips[0] = ip;
-		ips[1] = dp;
-		xfs_lock_inodes(ips, 2, XFS_ILOCK_EXCL);
-	}
-	/* else	 e_inum == dp->i_ino */
-	/*     This can happen if we're asked to lock /x/..
-	 *     the entry is "..", which is also the parent directory.
-	 */
-
-	return 0;
-}
-
-#ifdef DEBUG
 int xfs_locked_n;
 int xfs_small_retries;
 int xfs_middle_retries;
@@ -2098,12 +1838,44 @@ again:
 #endif
 }
 
-#ifdef	DEBUG
-#define	REMOVE_DEBUG_TRACE(x)	{remove_which_error_return = (x);}
-int remove_which_error_return = 0;
-#else /* ! DEBUG */
-#define	REMOVE_DEBUG_TRACE(x)
-#endif	/* ! DEBUG */
+void
+xfs_lock_two_inodes(
+	xfs_inode_t		*ip0,
+	xfs_inode_t		*ip1,
+	uint			lock_mode)
+{
+	xfs_inode_t		*temp;
+	int			attempts = 0;
+	xfs_log_item_t		*lp;
+
+	ASSERT(ip0->i_ino != ip1->i_ino);
+
+	if (ip0->i_ino > ip1->i_ino) {
+		temp = ip0;
+		ip0 = ip1;
+		ip1 = temp;
+	}
+
+ again:
+	xfs_ilock(ip0, xfs_lock_inumorder(lock_mode, 0));
+
+	/*
+	 * If the first lock we have locked is in the AIL, we must TRY to get
+	 * the second lock. If we can't get it, we must release the first one
+	 * and try again.
+	 */
+	lp = (xfs_log_item_t *)ip0->i_itemp;
+	if (lp && (lp->li_flags & XFS_LI_IN_AIL)) {
+		if (!xfs_ilock_nowait(ip1, xfs_lock_inumorder(lock_mode, 1))) {
+			xfs_iunlock(ip0, lock_mode);
+			if ((++attempts % 5) == 0)
+				delay(1); /* Don't just spin the CPU */
+			goto again;
+		}
+	} else {
+		xfs_ilock(ip1, xfs_lock_inumorder(lock_mode, 1));
+	}
+}
 
 int
 xfs_remove(
@@ -2113,6 +1885,7 @@ xfs_remove(
 {
 	xfs_mount_t		*mp = dp->i_mount;
 	xfs_trans_t             *tp = NULL;
+	int			is_dir = S_ISDIR(ip->i_d.di_mode);
 	int                     error = 0;
 	xfs_bmap_free_t         free_list;
 	xfs_fsblock_t           first_block;
@@ -2120,8 +1893,10 @@ xfs_remove(
 	int			committed;
 	int			link_zero;
 	uint			resblks;
+	uint			log_count;
 
 	xfs_itrace_entry(dp);
+	xfs_itrace_entry(ip);
 
 	if (XFS_FORCED_SHUTDOWN(mp))
 		return XFS_ERROR(EIO);
@@ -2134,19 +1909,23 @@ xfs_remove(
 			return error;
 	}
 
-	xfs_itrace_entry(ip);
-	xfs_itrace_ref(ip);
-
 	error = XFS_QM_DQATTACH(mp, dp, 0);
-	if (!error)
-		error = XFS_QM_DQATTACH(mp, ip, 0);
-	if (error) {
-		REMOVE_DEBUG_TRACE(__LINE__);
+	if (error)
 		goto std_return;
-	}
 
-	tp = xfs_trans_alloc(mp, XFS_TRANS_REMOVE);
+	error = XFS_QM_DQATTACH(mp, ip, 0);
+	if (error)
+		goto std_return;
+
+	if (is_dir) {
+		tp = xfs_trans_alloc(mp, XFS_TRANS_RMDIR);
+		log_count = XFS_DEFAULT_LOG_COUNT;
+	} else {
+		tp = xfs_trans_alloc(mp, XFS_TRANS_REMOVE);
+		log_count = XFS_REMOVE_LOG_COUNT;
+	}
 	cancel_flags = XFS_TRANS_RELEASE_LOG_RES;
+
 	/*
 	 * We try to get the real space reservation first,
 	 * allowing for directory btree deletion(s) implying
@@ -2158,25 +1937,19 @@ xfs_remove(
 	 */
 	resblks = XFS_REMOVE_SPACE_RES(mp);
 	error = xfs_trans_reserve(tp, resblks, XFS_REMOVE_LOG_RES(mp), 0,
-			XFS_TRANS_PERM_LOG_RES, XFS_REMOVE_LOG_COUNT);
+				  XFS_TRANS_PERM_LOG_RES, log_count);
 	if (error == ENOSPC) {
 		resblks = 0;
 		error = xfs_trans_reserve(tp, 0, XFS_REMOVE_LOG_RES(mp), 0,
-				XFS_TRANS_PERM_LOG_RES, XFS_REMOVE_LOG_COUNT);
+					  XFS_TRANS_PERM_LOG_RES, log_count);
 	}
 	if (error) {
 		ASSERT(error != ENOSPC);
-		REMOVE_DEBUG_TRACE(__LINE__);
-		xfs_trans_cancel(tp, 0);
-		return error;
+		cancel_flags = 0;
+		goto out_trans_cancel;
 	}
 
-	error = xfs_lock_dir_and_entry(dp, ip);
-	if (error) {
-		REMOVE_DEBUG_TRACE(__LINE__);
-		xfs_trans_cancel(tp, cancel_flags);
-		goto std_return;
-	}
+	xfs_lock_two_inodes(dp, ip, XFS_ILOCK_EXCL);
 
 	/*
 	 * At this point, we've gotten both the directory and the entry
@@ -2189,46 +1962,83 @@ xfs_remove(
 	xfs_trans_ijoin(tp, ip, XFS_ILOCK_EXCL);
 
 	/*
-	 * Entry must exist since we did a lookup in xfs_lock_dir_and_entry.
+	 * If we're removing a directory perform some additional validation.
 	 */
+	if (is_dir) {
+		ASSERT(ip->i_d.di_nlink >= 2);
+		if (ip->i_d.di_nlink != 2) {
+			error = XFS_ERROR(ENOTEMPTY);
+			goto out_trans_cancel;
+		}
+		if (!xfs_dir_isempty(ip)) {
+			error = XFS_ERROR(ENOTEMPTY);
+			goto out_trans_cancel;
+		}
+	}
+
 	XFS_BMAP_INIT(&free_list, &first_block);
 	error = xfs_dir_removename(tp, dp, name, ip->i_ino,
 					&first_block, &free_list, resblks);
 	if (error) {
 		ASSERT(error != ENOENT);
-		REMOVE_DEBUG_TRACE(__LINE__);
-		goto error1;
+		goto out_bmap_cancel;
 	}
 	xfs_ichgtime(dp, XFS_ICHGTIME_MOD | XFS_ICHGTIME_CHG);
 
+	/*
+	 * Bump the in memory generation count on the parent
+	 * directory so that other can know that it has changed.
+	 */
 	dp->i_gen++;
 	xfs_trans_log_inode(tp, dp, XFS_ILOG_CORE);
 
-	error = xfs_droplink(tp, ip);
-	if (error) {
-		REMOVE_DEBUG_TRACE(__LINE__);
-		goto error1;
+	if (is_dir) {
+		/*
+		 * Drop the link from ip's "..".
+		 */
+		error = xfs_droplink(tp, dp);
+		if (error)
+			goto out_bmap_cancel;
+
+		/*
+		 * Drop the link from dp to ip.
+		 */
+		error = xfs_droplink(tp, ip);
+		if (error)
+			goto out_bmap_cancel;
+	} else {
+		/*
+		 * When removing a non-directory we need to log the parent
+		 * inode here for the i_gen update.  For a directory this is
+		 * done implicitly by the xfs_droplink call for the ".." entry.
+		 */
+		xfs_trans_log_inode(tp, dp, XFS_ILOG_CORE);
 	}
 
-	/* Determine if this is the last link while
+	/*
+	 * Drop the "." link from ip to self.
+	 */
+	error = xfs_droplink(tp, ip);
+	if (error)
+		goto out_bmap_cancel;
+
+	/*
+	 * Determine if this is the last link while
 	 * we are in the transaction.
 	 */
-	link_zero = (ip)->i_d.di_nlink==0;
+	link_zero = (ip->i_d.di_nlink == 0);
 
 	/*
 	 * If this is a synchronous mount, make sure that the
 	 * remove transaction goes to disk before returning to
 	 * the user.
 	 */
-	if (mp->m_flags & (XFS_MOUNT_WSYNC|XFS_MOUNT_DIRSYNC)) {
+	if (mp->m_flags & (XFS_MOUNT_WSYNC|XFS_MOUNT_DIRSYNC))
 		xfs_trans_set_sync(tp);
-	}
 
 	error = xfs_bmap_finish(&tp, &free_list, &committed);
-	if (error) {
-		REMOVE_DEBUG_TRACE(__LINE__);
-		goto error_rele;
-	}
+	if (error)
+		goto out_bmap_cancel;
 
 	error = xfs_trans_commit(tp, XFS_TRANS_RELEASE_LOG_RES);
 	if (error)
@@ -2240,38 +2050,26 @@ xfs_remove(
 	 * will get killed on last close in xfs_close() so we don't
 	 * have to worry about that.
 	 */
-	if (link_zero && xfs_inode_is_filestream(ip))
+	if (!is_dir && link_zero && xfs_inode_is_filestream(ip))
 		xfs_filestream_deassociate(ip);
 
 	xfs_itrace_exit(ip);
+	xfs_itrace_exit(dp);
 
-/*	Fall through to std_return with error = 0 */
  std_return:
 	if (DM_EVENT_ENABLED(dp, DM_EVENT_POSTREMOVE)) {
-		(void) XFS_SEND_NAMESP(mp, DM_EVENT_POSTREMOVE,
-				dp, DM_RIGHT_NULL,
-				NULL, DM_RIGHT_NULL,
-				name->name, NULL, ip->i_d.di_mode, error, 0);
+		XFS_SEND_NAMESP(mp, DM_EVENT_POSTREMOVE, dp, DM_RIGHT_NULL,
+				NULL, DM_RIGHT_NULL, name->name, NULL,
+				ip->i_d.di_mode, error, 0);
 	}
-	return error;
 
- error1:
-	xfs_bmap_cancel(&free_list);
-	cancel_flags |= XFS_TRANS_ABORT;
-	xfs_trans_cancel(tp, cancel_flags);
-	goto std_return;
+	return error;
 
- error_rele:
-	/*
-	 * In this case make sure to not release the inode until after
-	 * the current transaction is aborted.  Releasing it beforehand
-	 * can cause us to go to xfs_inactive and start a recursive
-	 * transaction which can easily deadlock with the current one.
-	 */
+ out_bmap_cancel:
 	xfs_bmap_cancel(&free_list);
 	cancel_flags |= XFS_TRANS_ABORT;
+ out_trans_cancel:
 	xfs_trans_cancel(tp, cancel_flags);
-
 	goto std_return;
 }
 
@@ -2283,7 +2081,6 @@ xfs_link(
 {
 	xfs_mount_t		*mp = tdp->i_mount;
 	xfs_trans_t		*tp;
-	xfs_inode_t		*ips[2];
 	int			error;
 	xfs_bmap_free_t         free_list;
 	xfs_fsblock_t           first_block;
@@ -2331,15 +2128,7 @@ xfs_link(
 		goto error_return;
 	}
 
-	if (sip->i_ino < tdp->i_ino) {
-		ips[0] = sip;
-		ips[1] = tdp;
-	} else {
-		ips[0] = tdp;
-		ips[1] = sip;
-	}
-
-	xfs_lock_inodes(ips, 2, XFS_ILOCK_EXCL);
+	xfs_lock_two_inodes(sip, tdp, XFS_ILOCK_EXCL);
 
 	/*
 	 * Increment vnode ref counts since xfs_trans_commit &
@@ -2480,7 +2269,7 @@ xfs_mkdir(
 	 * Make sure that we have allocated dquot(s) on disk.
 	 */
 	error = XFS_QM_DQVOPALLOC(mp, dp,
-			current_fsuid(credp), current_fsgid(credp), prid,
+			current_fsuid(), current_fsgid(), prid,
 			XFS_QMOPT_QUOTALL | XFS_QMOPT_INHERIT, &udqp, &gdqp);
 	if (error)
 		goto std_return;
@@ -2638,186 +2427,6 @@ std_return:
 }
 
 int
-xfs_rmdir(
-	xfs_inode_t             *dp,
-	struct xfs_name		*name,
-	xfs_inode_t		*cdp)
-{
-	xfs_mount_t		*mp = dp->i_mount;
-	xfs_trans_t             *tp;
-	int                     error;
-	xfs_bmap_free_t         free_list;
-	xfs_fsblock_t           first_block;
-	int			cancel_flags;
-	int			committed;
-	int			last_cdp_link;
-	uint			resblks;
-
-	xfs_itrace_entry(dp);
-
-	if (XFS_FORCED_SHUTDOWN(mp))
-		return XFS_ERROR(EIO);
-
-	if (DM_EVENT_ENABLED(dp, DM_EVENT_REMOVE)) {
-		error = XFS_SEND_NAMESP(mp, DM_EVENT_REMOVE,
-					dp, DM_RIGHT_NULL,
-					NULL, DM_RIGHT_NULL, name->name,
-					NULL, cdp->i_d.di_mode, 0, 0);
-		if (error)
-			return XFS_ERROR(error);
-	}
-
-	/*
-	 * Get the dquots for the inodes.
-	 */
-	error = XFS_QM_DQATTACH(mp, dp, 0);
-	if (!error)
-		error = XFS_QM_DQATTACH(mp, cdp, 0);
-	if (error) {
-		REMOVE_DEBUG_TRACE(__LINE__);
-		goto std_return;
-	}
-
-	tp = xfs_trans_alloc(mp, XFS_TRANS_RMDIR);
-	cancel_flags = XFS_TRANS_RELEASE_LOG_RES;
-	/*
-	 * We try to get the real space reservation first,
-	 * allowing for directory btree deletion(s) implying
-	 * possible bmap insert(s).  If we can't get the space
-	 * reservation then we use 0 instead, and avoid the bmap
-	 * btree insert(s) in the directory code by, if the bmap
-	 * insert tries to happen, instead trimming the LAST
-	 * block from the directory.
-	 */
-	resblks = XFS_REMOVE_SPACE_RES(mp);
-	error = xfs_trans_reserve(tp, resblks, XFS_REMOVE_LOG_RES(mp), 0,
-			XFS_TRANS_PERM_LOG_RES, XFS_DEFAULT_LOG_COUNT);
-	if (error == ENOSPC) {
-		resblks = 0;
-		error = xfs_trans_reserve(tp, 0, XFS_REMOVE_LOG_RES(mp), 0,
-				XFS_TRANS_PERM_LOG_RES, XFS_DEFAULT_LOG_COUNT);
-	}
-	if (error) {
-		ASSERT(error != ENOSPC);
-		cancel_flags = 0;
-		goto error_return;
-	}
-	XFS_BMAP_INIT(&free_list, &first_block);
-
-	/*
-	 * Now lock the child directory inode and the parent directory
-	 * inode in the proper order.  This will take care of validating
-	 * that the directory entry for the child directory inode has
-	 * not changed while we were obtaining a log reservation.
-	 */
-	error = xfs_lock_dir_and_entry(dp, cdp);
-	if (error) {
-		xfs_trans_cancel(tp, cancel_flags);
-		goto std_return;
-	}
-
-	IHOLD(dp);
-	xfs_trans_ijoin(tp, dp, XFS_ILOCK_EXCL);
-
-	IHOLD(cdp);
-	xfs_trans_ijoin(tp, cdp, XFS_ILOCK_EXCL);
-
-	ASSERT(cdp->i_d.di_nlink >= 2);
-	if (cdp->i_d.di_nlink != 2) {
-		error = XFS_ERROR(ENOTEMPTY);
-		goto error_return;
-	}
-	if (!xfs_dir_isempty(cdp)) {
-		error = XFS_ERROR(ENOTEMPTY);
-		goto error_return;
-	}
-
-	error = xfs_dir_removename(tp, dp, name, cdp->i_ino,
-					&first_block, &free_list, resblks);
-	if (error)
-		goto error1;
-
-	xfs_ichgtime(dp, XFS_ICHGTIME_MOD | XFS_ICHGTIME_CHG);
-
-	/*
-	 * Bump the in memory generation count on the parent
-	 * directory so that other can know that it has changed.
-	 */
-	dp->i_gen++;
-
-	/*
-	 * Drop the link from cdp's "..".
-	 */
-	error = xfs_droplink(tp, dp);
-	if (error) {
-		goto error1;
-	}
-
-	/*
-	 * Drop the link from dp to cdp.
-	 */
-	error = xfs_droplink(tp, cdp);
-	if (error) {
-		goto error1;
-	}
-
-	/*
-	 * Drop the "." link from cdp to self.
-	 */
-	error = xfs_droplink(tp, cdp);
-	if (error) {
-		goto error1;
-	}
-
-	/* Determine these before committing transaction */
-	last_cdp_link = (cdp)->i_d.di_nlink==0;
-
-	/*
-	 * If this is a synchronous mount, make sure that the
-	 * rmdir transaction goes to disk before returning to
-	 * the user.
-	 */
-	if (mp->m_flags & (XFS_MOUNT_WSYNC|XFS_MOUNT_DIRSYNC)) {
-		xfs_trans_set_sync(tp);
-	}
-
-	error = xfs_bmap_finish (&tp, &free_list, &committed);
-	if (error) {
-		xfs_bmap_cancel(&free_list);
-		xfs_trans_cancel(tp, (XFS_TRANS_RELEASE_LOG_RES |
-				 XFS_TRANS_ABORT));
-		goto std_return;
-	}
-
-	error = xfs_trans_commit(tp, XFS_TRANS_RELEASE_LOG_RES);
-	if (error) {
-		goto std_return;
-	}
-
-
-	/* Fall through to std_return with error = 0 or the errno
-	 * from xfs_trans_commit. */
- std_return:
-	if (DM_EVENT_ENABLED(dp, DM_EVENT_POSTREMOVE)) {
-		(void) XFS_SEND_NAMESP(mp, DM_EVENT_POSTREMOVE,
-					dp, DM_RIGHT_NULL,
-					NULL, DM_RIGHT_NULL,
-					name->name, NULL, cdp->i_d.di_mode,
-					error, 0);
-	}
-	return error;
-
- error1:
-	xfs_bmap_cancel(&free_list);
-	cancel_flags |= XFS_TRANS_ABORT;
-	/* FALLTHROUGH */
-
- error_return:
-	xfs_trans_cancel(tp, cancel_flags);
-	goto std_return;
-}
-
-int
 xfs_symlink(
 	xfs_inode_t		*dp,
 	struct xfs_name		*link_name,
@@ -2886,7 +2495,7 @@ xfs_symlink(
 	 * Make sure that we have allocated dquot(s) on disk.
 	 */
 	error = XFS_QM_DQVOPALLOC(mp, dp,
-			current_fsuid(credp), current_fsgid(credp), prid,
+			current_fsuid(), current_fsgid(), prid,
 			XFS_QMOPT_QUOTALL | XFS_QMOPT_INHERIT, &udqp, &gdqp);
 	if (error)
 		goto std_return;
@@ -3181,14 +2790,13 @@ int
 xfs_reclaim(
 	xfs_inode_t	*ip)
 {
-	bhv_vnode_t	*vp = XFS_ITOV(ip);
 
 	xfs_itrace_entry(ip);
 
-	ASSERT(!VN_MAPPED(vp));
+	ASSERT(!VN_MAPPED(VFS_I(ip)));
 
 	/* bad inode, get out here ASAP */
-	if (VN_BAD(vp)) {
+	if (VN_BAD(VFS_I(ip))) {
 		xfs_ireclaim(ip);
 		return 0;
 	}
@@ -3225,7 +2833,7 @@ xfs_reclaim(
 		XFS_MOUNT_ILOCK(mp);
 		spin_lock(&ip->i_flags_lock);
 		__xfs_iflags_set(ip, XFS_IRECLAIMABLE);
-		vn_to_inode(vp)->i_private = NULL;
+		VFS_I(ip)->i_private = NULL;
 		ip->i_vnode = NULL;
 		spin_unlock(&ip->i_flags_lock);
 		list_add_tail(&ip->i_reclaim, &mp->m_del_inodes);
@@ -3241,8 +2849,7 @@ xfs_finish_reclaim(
 	int		sync_mode)
 {
 	xfs_perag_t	*pag = xfs_get_perag(ip->i_mount, ip->i_ino);
-	bhv_vnode_t	*vp = XFS_ITOV_NULL(ip);
-	int		error;
+	struct inode	*vp = VFS_I(ip);
 
 	if (vp && VN_BAD(vp))
 		goto reclaim;
@@ -3285,29 +2892,16 @@ xfs_finish_reclaim(
 		xfs_iflock(ip);
 	}
 
-	if (!XFS_FORCED_SHUTDOWN(ip->i_mount)) {
-		if (ip->i_update_core ||
-		    ((ip->i_itemp != NULL) &&
-		     (ip->i_itemp->ili_format.ilf_fields != 0))) {
-			error = xfs_iflush(ip, sync_mode);
-			/*
-			 * If we hit an error, typically because of filesystem
-			 * shutdown, we don't need to let vn_reclaim to know
-			 * because we're gonna reclaim the inode anyway.
-			 */
-			if (error) {
-				xfs_iunlock(ip, XFS_ILOCK_EXCL);
-				goto reclaim;
-			}
-			xfs_iflock(ip); /* synchronize with xfs_iflush_done */
-		}
-
-		ASSERT(ip->i_update_core == 0);
-		ASSERT(ip->i_itemp == NULL ||
-		       ip->i_itemp->ili_format.ilf_fields == 0);
+	/*
+	 * In the case of a forced shutdown we rely on xfs_iflush() to
+	 * wait for the inode to be unpinned before returning an error.
+	 */
+	if (xfs_iflush(ip, sync_mode) == 0) {
+		/* synchronize with xfs_iflush_done */
+		xfs_iflock(ip);
+		xfs_ifunlock(ip);
 	}
 
-	xfs_ifunlock(ip);
 	xfs_iunlock(ip, XFS_ILOCK_EXCL);
 
  reclaim:
@@ -3418,7 +3012,7 @@ xfs_alloc_file_space(
 
 	/*	Generate a DMAPI event if needed.	*/
 	if (alloc_type != 0 && offset < ip->i_size &&
-			(attr_flags&ATTR_DMI) == 0  &&
+			(attr_flags & XFS_ATTR_DMI) == 0  &&
 			DM_EVENT_ENABLED(ip, DM_EVENT_WRITE)) {
 		xfs_off_t           end_dmi_offset;
 
@@ -3532,7 +3126,7 @@ retry:
 		allocatesize_fsb -= allocated_fsb;
 	}
 dmapi_enospc_check:
-	if (error == ENOSPC && (attr_flags & ATTR_DMI) == 0 &&
+	if (error == ENOSPC && (attr_flags & XFS_ATTR_DMI) == 0 &&
 	    DM_EVENT_ENABLED(ip, DM_EVENT_NOSPACE)) {
 		error = XFS_SEND_NAMESP(mp, DM_EVENT_NOSPACE,
 				ip, DM_RIGHT_NULL,
@@ -3643,7 +3237,6 @@ xfs_free_file_space(
 	xfs_off_t		len,
 	int			attr_flags)
 {
-	bhv_vnode_t		*vp;
 	int			committed;
 	int			done;
 	xfs_off_t		end_dmi_offset;
@@ -3663,7 +3256,6 @@ xfs_free_file_space(
 	xfs_trans_t		*tp;
 	int			need_iolock = 1;
 
-	vp = XFS_ITOV(ip);
 	mp = ip->i_mount;
 
 	xfs_itrace_entry(ip);
@@ -3679,7 +3271,7 @@ xfs_free_file_space(
 	end_dmi_offset = offset + len;
 	endoffset_fsb = XFS_B_TO_FSBT(mp, end_dmi_offset);
 
-	if (offset < ip->i_size && (attr_flags & ATTR_DMI) == 0 &&
+	if (offset < ip->i_size && (attr_flags & XFS_ATTR_DMI) == 0 &&
 	    DM_EVENT_ENABLED(ip, DM_EVENT_WRITE)) {
 		if (end_dmi_offset > ip->i_size)
 			end_dmi_offset = ip->i_size;
@@ -3690,7 +3282,7 @@ xfs_free_file_space(
 			return error;
 	}
 
-	if (attr_flags & ATTR_NOLOCK)
+	if (attr_flags & XFS_ATTR_NOLOCK)
 		need_iolock = 0;
 	if (need_iolock) {
 		xfs_ilock(ip, XFS_IOLOCK_EXCL);
@@ -3700,7 +3292,7 @@ xfs_free_file_space(
 	rounding = max_t(uint, 1 << mp->m_sb.sb_blocklog, PAGE_CACHE_SIZE);
 	ioffset = offset & ~(rounding - 1);
 
-	if (VN_CACHED(vp) != 0) {
+	if (VN_CACHED(VFS_I(ip)) != 0) {
 		xfs_inval_cached_trace(ip, ioffset, -1, ioffset, -1);
 		error = xfs_flushinval_pages(ip, ioffset, -1, FI_REMAPF_LOCKED);
 		if (error)
@@ -3867,7 +3459,7 @@ xfs_change_file_space(
 	xfs_off_t	startoffset;
 	xfs_off_t	llen;
 	xfs_trans_t	*tp;
-	bhv_vattr_t	va;
+	struct iattr	iattr;
 
 	xfs_itrace_entry(ip);
 
@@ -3941,10 +3533,10 @@ xfs_change_file_space(
 				break;
 		}
 
-		va.va_mask = XFS_AT_SIZE;
-		va.va_size = startoffset;
+		iattr.ia_valid = ATTR_SIZE;
+		iattr.ia_size = startoffset;
 
-		error = xfs_setattr(ip, &va, attr_flags, credp);
+		error = xfs_setattr(ip, &iattr, attr_flags, credp);
 
 		if (error)
 			return error;
@@ -3974,7 +3566,7 @@ xfs_change_file_space(
 	xfs_trans_ijoin(tp, ip, XFS_ILOCK_EXCL);
 	xfs_trans_ihold(tp, ip);
 
-	if ((attr_flags & ATTR_DMI) == 0) {
+	if ((attr_flags & XFS_ATTR_DMI) == 0) {
 		ip->i_d.di_mode &= ~S_ISUID;
 
 		/*
diff --git a/fs/xfs/xfs_vnodeops.h b/fs/xfs/xfs_vnodeops.h
index 57335ba4ce53..e932a96bec54 100644
--- a/fs/xfs/xfs_vnodeops.h
+++ b/fs/xfs/xfs_vnodeops.h
@@ -2,9 +2,9 @@
 #define _XFS_VNODEOPS_H 1
 
 struct attrlist_cursor_kern;
-struct bhv_vattr;
 struct cred;
 struct file;
+struct iattr;
 struct inode;
 struct iovec;
 struct kiocb;
@@ -15,14 +15,18 @@ struct xfs_iomap;
 
 
 int xfs_open(struct xfs_inode *ip);
-int xfs_setattr(struct xfs_inode *ip, struct bhv_vattr *vap, int flags,
+int xfs_setattr(struct xfs_inode *ip, struct iattr *vap, int flags,
 		struct cred *credp);
+#define	XFS_ATTR_DMI		0x01	/* invocation from a DMI function */
+#define	XFS_ATTR_NONBLOCK	0x02	/* return EAGAIN if operation would block */
+#define XFS_ATTR_NOLOCK		0x04	/* Don't grab any conflicting locks */
+
 int xfs_readlink(struct xfs_inode *ip, char *link);
 int xfs_fsync(struct xfs_inode *ip);
 int xfs_release(struct xfs_inode *ip);
 int xfs_inactive(struct xfs_inode *ip);
 int xfs_lookup(struct xfs_inode *dp, struct xfs_name *name,
-		struct xfs_inode **ipp);
+		struct xfs_inode **ipp, struct xfs_name *ci_name);
 int xfs_create(struct xfs_inode *dp, struct xfs_name *name, mode_t mode,
 		xfs_dev_t rdev, struct xfs_inode **ipp, struct cred *credp);
 int xfs_remove(struct xfs_inode *dp, struct xfs_name *name,
@@ -31,8 +35,6 @@ int xfs_link(struct xfs_inode *tdp, struct xfs_inode *sip,
 		struct xfs_name *target_name);
 int xfs_mkdir(struct xfs_inode *dp, struct xfs_name *dir_name,
 		mode_t mode, struct xfs_inode **ipp, struct cred *credp);
-int xfs_rmdir(struct xfs_inode *dp, struct xfs_name *name,
-		struct xfs_inode *cdp);
 int xfs_readdir(struct xfs_inode	*dp, void *dirent, size_t bufsize,
 		       xfs_off_t *offset, filldir_t filldir);
 int xfs_symlink(struct xfs_inode *dp, struct xfs_name *link_name,
diff --git a/include/Kbuild b/include/Kbuild
index bdca155028ec..d8c3e3cbf416 100644
--- a/include/Kbuild
+++ b/include/Kbuild
@@ -1,3 +1,6 @@
+# Top-level Makefile calls into asm-$(ARCH)
+# List only non-arch directories below
+
 header-y += asm-generic/
 header-y += linux/
 header-y += sound/
@@ -5,5 +8,3 @@ header-y += mtd/
 header-y += rdma/
 header-y += video/
 header-y += drm/
-
-header-y += asm-$(ARCH)/
diff --git a/include/acpi/acnamesp.h b/include/acpi/acnamesp.h
index 9ed70a050580..c34008507b69 100644
--- a/include/acpi/acnamesp.h
+++ b/include/acpi/acnamesp.h
@@ -182,7 +182,7 @@ acpi_status acpi_ns_evaluate(struct acpi_evaluate_info *info);
  */
 u32 acpi_ns_opens_scope(acpi_object_type type);
 
-void
+acpi_status
 acpi_ns_build_external_path(struct acpi_namespace_node *node,
 			    acpi_size size, char *name_buffer);
 
diff --git a/include/acpi/actbl.h b/include/acpi/actbl.h
index 1ebbe883f786..13a3d9ad92db 100644
--- a/include/acpi/actbl.h
+++ b/include/acpi/actbl.h
@@ -277,6 +277,7 @@ enum acpi_prefered_pm_profiles {
 #define BAF_LEGACY_DEVICES              0x0001
 #define BAF_8042_KEYBOARD_CONTROLLER    0x0002
 #define BAF_MSI_NOT_SUPPORTED           0x0008
+#define BAF_PCIE_ASPM_CONTROL           0x0010
 
 #define FADT2_REVISION_ID               3
 #define FADT2_MINUS_REVISION_ID         2
diff --git a/include/asm-alpha/dma-mapping.h b/include/asm-alpha/dma-mapping.h
deleted file mode 100644
index db351d1296f4..000000000000
--- a/include/asm-alpha/dma-mapping.h
+++ /dev/null
@@ -1,69 +0,0 @@
-#ifndef _ALPHA_DMA_MAPPING_H
-#define _ALPHA_DMA_MAPPING_H
-
-
-#ifdef CONFIG_PCI
-
-#include <linux/pci.h>
-
-#define dma_map_single(dev, va, size, dir)		\
-		pci_map_single(alpha_gendev_to_pci(dev), va, size, dir)
-#define dma_unmap_single(dev, addr, size, dir)		\
-		pci_unmap_single(alpha_gendev_to_pci(dev), addr, size, dir)
-#define dma_alloc_coherent(dev, size, addr, gfp)	\
-	      __pci_alloc_consistent(alpha_gendev_to_pci(dev), size, addr, gfp)
-#define dma_free_coherent(dev, size, va, addr)		\
-		pci_free_consistent(alpha_gendev_to_pci(dev), size, va, addr)
-#define dma_map_page(dev, page, off, size, dir)		\
-		pci_map_page(alpha_gendev_to_pci(dev), page, off, size, dir)
-#define dma_unmap_page(dev, addr, size, dir)		\
-		pci_unmap_page(alpha_gendev_to_pci(dev), addr, size, dir)
-#define dma_map_sg(dev, sg, nents, dir)			\
-		pci_map_sg(alpha_gendev_to_pci(dev), sg, nents, dir)
-#define dma_unmap_sg(dev, sg, nents, dir)		\
-		pci_unmap_sg(alpha_gendev_to_pci(dev), sg, nents, dir)
-#define dma_supported(dev, mask)			\
-		pci_dma_supported(alpha_gendev_to_pci(dev), mask)
-#define dma_mapping_error(addr)				\
-		pci_dma_mapping_error(addr)
-
-#else	/* no PCI - no IOMMU. */
-
-struct scatterlist;
-void *dma_alloc_coherent(struct device *dev, size_t size,
-			 dma_addr_t *dma_handle, gfp_t gfp);
-int dma_map_sg(struct device *dev, struct scatterlist *sg, int nents,
-	       enum dma_data_direction direction);
-
-#define dma_free_coherent(dev, size, va, addr)		\
-		free_pages((unsigned long)va, get_order(size))
-#define dma_supported(dev, mask)		(mask < 0x00ffffffUL ? 0 : 1)
-#define dma_map_single(dev, va, size, dir)	virt_to_phys(va)
-#define dma_map_page(dev, page, off, size, dir)	(page_to_pa(page) + off)
-
-#define dma_unmap_single(dev, addr, size, dir)	((void)0)
-#define dma_unmap_page(dev, addr, size, dir)	((void)0)
-#define dma_unmap_sg(dev, sg, nents, dir)	((void)0)
-
-#define dma_mapping_error(addr)  (0)
-
-#endif	/* !CONFIG_PCI */
-
-#define dma_alloc_noncoherent(d, s, h, f)	dma_alloc_coherent(d, s, h, f)
-#define dma_free_noncoherent(d, s, v, h)	dma_free_coherent(d, s, v, h)
-#define dma_is_consistent(d, h)			(1)
-
-int dma_set_mask(struct device *dev, u64 mask);
-
-#define dma_sync_single_for_cpu(dev, addr, size, dir)	  ((void)0)
-#define dma_sync_single_for_device(dev, addr, size, dir)  ((void)0)
-#define dma_sync_single_range(dev, addr, off, size, dir)  ((void)0)
-#define dma_sync_sg_for_cpu(dev, sg, nents, dir)	  ((void)0)
-#define dma_sync_sg_for_device(dev, sg, nents, dir)	  ((void)0)
-#define dma_cache_sync(dev, va, size, dir)		  ((void)0)
-#define dma_sync_single_range_for_cpu(dev, addr, offset, size, dir)	((void)0)
-#define dma_sync_single_range_for_device(dev, addr, offset, size, dir)	((void)0)
-
-#define dma_get_cache_alignment()			  L1_CACHE_BYTES
-
-#endif	/* _ALPHA_DMA_MAPPING_H */
diff --git a/include/asm-alpha/kvm.h b/include/asm-alpha/kvm.h
deleted file mode 100644
index b9daec429689..000000000000
--- a/include/asm-alpha/kvm.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef __LINUX_KVM_ALPHA_H
-#define __LINUX_KVM_ALPHA_H
-
-/* alpha does not support KVM */
-
-#endif
diff --git a/include/asm-alpha/namei.h b/include/asm-alpha/namei.h
deleted file mode 100644
index 5cc9bb39499d..000000000000
--- a/include/asm-alpha/namei.h
+++ /dev/null
@@ -1,17 +0,0 @@
-/* $Id: namei.h,v 1.1 1996/12/13 14:48:21 jj Exp $
- * linux/include/asm-alpha/namei.h
- *
- * Included from linux/fs/namei.c
- */
-
-#ifndef __ALPHA_NAMEI_H
-#define __ALPHA_NAMEI_H
-
-/* This dummy routine maybe changed to something useful
- * for /usr/gnemul/ emulation stuff.
- * Look at asm-sparc/namei.h for details.
- */
-
-#define __emul_prefix() NULL
-
-#endif /* __ALPHA_NAMEI_H */
diff --git a/include/asm-alpha/pci.h b/include/asm-alpha/pci.h
deleted file mode 100644
index d31fd49ff79a..000000000000
--- a/include/asm-alpha/pci.h
+++ /dev/null
@@ -1,276 +0,0 @@
-#ifndef __ALPHA_PCI_H
-#define __ALPHA_PCI_H
-
-#ifdef __KERNEL__
-
-#include <linux/spinlock.h>
-#include <linux/dma-mapping.h>
-#include <asm/scatterlist.h>
-#include <asm/machvec.h>
-
-/*
- * The following structure is used to manage multiple PCI busses.
- */
-
-struct pci_dev;
-struct pci_bus;
-struct resource;
-struct pci_iommu_arena;
-struct page;
-
-/* A controller.  Used to manage multiple PCI busses.  */
-
-struct pci_controller {
-	struct pci_controller *next;
-        struct pci_bus *bus;
-	struct resource *io_space;
-	struct resource *mem_space;
-
-	/* The following are for reporting to userland.  The invariant is
-	   that if we report a BWX-capable dense memory, we do not report
-	   a sparse memory at all, even if it exists.  */
-	unsigned long sparse_mem_base;
-	unsigned long dense_mem_base;
-	unsigned long sparse_io_base;
-	unsigned long dense_io_base;
-
-	/* This one's for the kernel only.  It's in KSEG somewhere.  */
-	unsigned long config_space_base;
-
-	unsigned int index;
-	/* For compatibility with current (as of July 2003) pciutils
-	   and XFree86. Eventually will be removed. */
-	unsigned int need_domain_info;
-
-	struct pci_iommu_arena *sg_pci;
-	struct pci_iommu_arena *sg_isa;
-
-	void *sysdata;
-};
-
-/* Override the logic in pci_scan_bus for skipping already-configured
-   bus numbers.  */
-
-#define pcibios_assign_all_busses()	1
-#define pcibios_scan_all_fns(a, b)	0
-
-#define PCIBIOS_MIN_IO		alpha_mv.min_io_address
-#define PCIBIOS_MIN_MEM		alpha_mv.min_mem_address
-
-extern void pcibios_set_master(struct pci_dev *dev);
-
-extern inline void pcibios_penalize_isa_irq(int irq, int active)
-{
-	/* We don't do dynamic PCI IRQ allocation */
-}
-
-/* IOMMU controls.  */
-
-/* The PCI address space does not equal the physical memory address space.
-   The networking and block device layers use this boolean for bounce buffer
-   decisions.  */
-#define PCI_DMA_BUS_IS_PHYS  0
-
-/* Allocate and map kernel buffer using consistent mode DMA for PCI
-   device.  Returns non-NULL cpu-view pointer to the buffer if
-   successful and sets *DMA_ADDRP to the pci side dma address as well,
-   else DMA_ADDRP is undefined.  */
-
-extern void *__pci_alloc_consistent(struct pci_dev *, size_t,
-				    dma_addr_t *, gfp_t);
-static inline void *
-pci_alloc_consistent(struct pci_dev *dev, size_t size, dma_addr_t *dma)
-{
-	return __pci_alloc_consistent(dev, size, dma, GFP_ATOMIC);
-}
-
-/* Free and unmap a consistent DMA buffer.  CPU_ADDR and DMA_ADDR must
-   be values that were returned from pci_alloc_consistent.  SIZE must
-   be the same as what as passed into pci_alloc_consistent.
-   References to the memory and mappings associated with CPU_ADDR or
-   DMA_ADDR past this call are illegal.  */
-
-extern void pci_free_consistent(struct pci_dev *, size_t, void *, dma_addr_t);
-
-/* Map a single buffer of the indicate size for PCI DMA in streaming mode.
-   The 32-bit PCI bus mastering address to use is returned.  Once the device
-   is given the dma address, the device owns this memory until either
-   pci_unmap_single or pci_dma_sync_single_for_cpu is performed.  */
-
-extern dma_addr_t pci_map_single(struct pci_dev *, void *, size_t, int);
-
-/* Likewise, but for a page instead of an address.  */
-extern dma_addr_t pci_map_page(struct pci_dev *, struct page *,
-			       unsigned long, size_t, int);
-
-/* Test for pci_map_single or pci_map_page having generated an error.  */
-
-static inline int
-pci_dma_mapping_error(dma_addr_t dma_addr)
-{
-	return dma_addr == 0;
-}
-
-/* Unmap a single streaming mode DMA translation.  The DMA_ADDR and
-   SIZE must match what was provided for in a previous pci_map_single
-   call.  All other usages are undefined.  After this call, reads by
-   the cpu to the buffer are guaranteed to see whatever the device
-   wrote there.  */
-
-extern void pci_unmap_single(struct pci_dev *, dma_addr_t, size_t, int);
-extern void pci_unmap_page(struct pci_dev *, dma_addr_t, size_t, int);
-
-/* pci_unmap_{single,page} is not a nop, thus... */
-#define DECLARE_PCI_UNMAP_ADDR(ADDR_NAME)	\
-	dma_addr_t ADDR_NAME;
-#define DECLARE_PCI_UNMAP_LEN(LEN_NAME)		\
-	__u32 LEN_NAME;
-#define pci_unmap_addr(PTR, ADDR_NAME)			\
-	((PTR)->ADDR_NAME)
-#define pci_unmap_addr_set(PTR, ADDR_NAME, VAL)		\
-	(((PTR)->ADDR_NAME) = (VAL))
-#define pci_unmap_len(PTR, LEN_NAME)			\
-	((PTR)->LEN_NAME)
-#define pci_unmap_len_set(PTR, LEN_NAME, VAL)		\
-	(((PTR)->LEN_NAME) = (VAL))
-
-/* Map a set of buffers described by scatterlist in streaming mode for
-   PCI DMA.  This is the scatter-gather version of the above
-   pci_map_single interface.  Here the scatter gather list elements
-   are each tagged with the appropriate PCI dma address and length.
-   They are obtained via sg_dma_{address,length}(SG).
-
-   NOTE: An implementation may be able to use a smaller number of DMA
-   address/length pairs than there are SG table elements.  (for
-   example via virtual mapping capabilities) The routine returns the
-   number of addr/length pairs actually used, at most nents.
-
-   Device ownership issues as mentioned above for pci_map_single are
-   the same here.  */
-
-extern int pci_map_sg(struct pci_dev *, struct scatterlist *, int, int);
-
-/* Unmap a set of streaming mode DMA translations.  Again, cpu read
-   rules concerning calls here are the same as for pci_unmap_single()
-   above.  */
-
-extern void pci_unmap_sg(struct pci_dev *, struct scatterlist *, int, int);
-
-/* Make physical memory consistent for a single streaming mode DMA
-   translation after a transfer and device currently has ownership
-   of the buffer.
-
-   If you perform a pci_map_single() but wish to interrogate the
-   buffer using the cpu, yet do not wish to teardown the PCI dma
-   mapping, you must call this function before doing so.  At the next
-   point you give the PCI dma address back to the card, you must first
-   perform a pci_dma_sync_for_device, and then the device again owns
-   the buffer.  */
-
-static inline void
-pci_dma_sync_single_for_cpu(struct pci_dev *dev, dma_addr_t dma_addr,
-			    long size, int direction)
-{
-	/* Nothing to do.  */
-}
-
-static inline void
-pci_dma_sync_single_for_device(struct pci_dev *dev, dma_addr_t dma_addr,
-			       size_t size, int direction)
-{
-	/* Nothing to do.  */
-}
-
-/* Make physical memory consistent for a set of streaming mode DMA
-   translations after a transfer.  The same as pci_dma_sync_single_*
-   but for a scatter-gather list, same rules and usage.  */
-
-static inline void
-pci_dma_sync_sg_for_cpu(struct pci_dev *dev, struct scatterlist *sg,
-			int nents, int direction)
-{
-	/* Nothing to do.  */
-}
-
-static inline void
-pci_dma_sync_sg_for_device(struct pci_dev *dev, struct scatterlist *sg,
-			   int nents, int direction)
-{
-	/* Nothing to do.  */
-}
-
-/* Return whether the given PCI device DMA address mask can
-   be supported properly.  For example, if your device can
-   only drive the low 24-bits during PCI bus mastering, then
-   you would pass 0x00ffffff as the mask to this function.  */
-
-extern int pci_dma_supported(struct pci_dev *hwdev, u64 mask);
-
-#ifdef CONFIG_PCI
-static inline void pci_dma_burst_advice(struct pci_dev *pdev,
-					enum pci_dma_burst_strategy *strat,
-					unsigned long *strategy_parameter)
-{
-	unsigned long cacheline_size;
-	u8 byte;
-
-	pci_read_config_byte(pdev, PCI_CACHE_LINE_SIZE, &byte);
-	if (byte == 0)
-		cacheline_size = 1024;
-	else
-		cacheline_size = (int) byte * 4;
-
-	*strat = PCI_DMA_BURST_BOUNDARY;
-	*strategy_parameter = cacheline_size;
-}
-#endif
-
-/* TODO: integrate with include/asm-generic/pci.h ? */
-static inline int pci_get_legacy_ide_irq(struct pci_dev *dev, int channel)
-{
-	return channel ? 15 : 14;
-}
-
-extern void pcibios_resource_to_bus(struct pci_dev *, struct pci_bus_region *,
-				    struct resource *);
-
-extern void pcibios_bus_to_resource(struct pci_dev *dev, struct resource *res,
-				    struct pci_bus_region *region);
-
-static inline struct resource *
-pcibios_select_root(struct pci_dev *pdev, struct resource *res)
-{
-	struct resource *root = NULL;
-
-	if (res->flags & IORESOURCE_IO)
-		root = &ioport_resource;
-	if (res->flags & IORESOURCE_MEM)
-		root = &iomem_resource;
-
-	return root;
-}
-
-#define pci_domain_nr(bus) ((struct pci_controller *)(bus)->sysdata)->index
-
-static inline int pci_proc_domain(struct pci_bus *bus)
-{
-	struct pci_controller *hose = bus->sysdata;
-	return hose->need_domain_info;
-}
-
-struct pci_dev *alpha_gendev_to_pci(struct device *dev);
-
-#endif /* __KERNEL__ */
-
-/* Values for the `which' argument to sys_pciconfig_iobase.  */
-#define IOBASE_HOSE		0
-#define IOBASE_SPARSE_MEM	1
-#define IOBASE_DENSE_MEM	2
-#define IOBASE_SPARSE_IO	3
-#define IOBASE_DENSE_IO		4
-#define IOBASE_ROOT_BUS		5
-#define IOBASE_FROM_HOSE	0x10000
-
-extern struct pci_dev *isa_bridge;
-
-#endif /* __ALPHA_PCI_H */
diff --git a/include/asm-alpha/thread_info.h b/include/asm-alpha/thread_info.h
deleted file mode 100644
index fb3185196298..000000000000
--- a/include/asm-alpha/thread_info.h
+++ /dev/null
@@ -1,116 +0,0 @@
-#ifndef _ALPHA_THREAD_INFO_H
-#define _ALPHA_THREAD_INFO_H
-
-#ifdef __KERNEL__
-
-#ifndef __ASSEMBLY__
-#include <asm/processor.h>
-#include <asm/types.h>
-#include <asm/hwrpb.h>
-#endif
-
-#ifndef __ASSEMBLY__
-struct thread_info {
-	struct pcb_struct	pcb;		/* palcode state */
-
-	struct task_struct	*task;		/* main task structure */
-	unsigned int		flags;		/* low level flags */
-	unsigned int		ieee_state;	/* see fpu.h */
-
-	struct exec_domain	*exec_domain;	/* execution domain */
-	mm_segment_t		addr_limit;	/* thread address space */
-	unsigned		cpu;		/* current CPU */
-	int			preempt_count; /* 0 => preemptable, <0 => BUG */
-
-	int bpt_nsaved;
-	unsigned long bpt_addr[2];		/* breakpoint handling  */
-	unsigned int bpt_insn[2];
-
-	struct restart_block	restart_block;
-};
-
-/*
- * Macros/functions for gaining access to the thread information structure.
- */
-#define INIT_THREAD_INFO(tsk)			\
-{						\
-	.task		= &tsk,			\
-	.exec_domain	= &default_exec_domain,	\
-	.addr_limit	= KERNEL_DS,		\
-	.restart_block = {			\
-		.fn = do_no_restart_syscall,	\
-	},					\
-}
-
-#define init_thread_info	(init_thread_union.thread_info)
-#define init_stack		(init_thread_union.stack)
-
-/* How to get the thread information struct from C.  */
-register struct thread_info *__current_thread_info __asm__("$8");
-#define current_thread_info()  __current_thread_info
-
-/* Thread information allocation.  */
-#define THREAD_SIZE (2*PAGE_SIZE)
-#define alloc_thread_info(tsk) \
-  ((struct thread_info *) __get_free_pages(GFP_KERNEL,1))
-#define free_thread_info(ti) free_pages((unsigned long) (ti), 1)
-
-#endif /* __ASSEMBLY__ */
-
-#define PREEMPT_ACTIVE		0x40000000
-
-/*
- * Thread information flags:
- * - these are process state flags and used from assembly
- * - pending work-to-be-done flags come first to fit in and immediate operand.
- *
- * TIF_SYSCALL_TRACE is known to be 0 via blbs.
- */
-#define TIF_SYSCALL_TRACE	0	/* syscall trace active */
-#define TIF_SIGPENDING		1	/* signal pending */
-#define TIF_NEED_RESCHED	2	/* rescheduling necessary */
-#define TIF_POLLING_NRFLAG	3	/* poll_idle is polling NEED_RESCHED */
-#define TIF_DIE_IF_KERNEL	4	/* dik recursion lock */
-#define TIF_UAC_NOPRINT		5	/* see sysinfo.h */
-#define TIF_UAC_NOFIX		6
-#define TIF_UAC_SIGBUS		7
-#define TIF_MEMDIE		8
-#define TIF_RESTORE_SIGMASK	9	/* restore signal mask in do_signal */
-
-#define _TIF_SYSCALL_TRACE	(1<<TIF_SYSCALL_TRACE)
-#define _TIF_SIGPENDING		(1<<TIF_SIGPENDING)
-#define _TIF_NEED_RESCHED	(1<<TIF_NEED_RESCHED)
-#define _TIF_POLLING_NRFLAG	(1<<TIF_POLLING_NRFLAG)
-#define _TIF_RESTORE_SIGMASK	(1<<TIF_RESTORE_SIGMASK)
-
-/* Work to do on interrupt/exception return.  */
-#define _TIF_WORK_MASK		(_TIF_SIGPENDING | _TIF_NEED_RESCHED)
-
-/* Work to do on any return to userspace.  */
-#define _TIF_ALLWORK_MASK	(_TIF_WORK_MASK		\
-				 | _TIF_SYSCALL_TRACE)
-
-#define ALPHA_UAC_SHIFT		6
-#define ALPHA_UAC_MASK		(1 << TIF_UAC_NOPRINT | 1 << TIF_UAC_NOFIX | \
-				 1 << TIF_UAC_SIGBUS)
-
-#define SET_UNALIGN_CTL(task,value)	({				     \
-	task_thread_info(task)->flags = ((task_thread_info(task)->flags &    \
-		~ALPHA_UAC_MASK)					     \
-		| (((value) << ALPHA_UAC_SHIFT)       & (1<<TIF_UAC_NOPRINT))\
-		| (((value) << (ALPHA_UAC_SHIFT + 1)) & (1<<TIF_UAC_SIGBUS)) \
-		| (((value) << (ALPHA_UAC_SHIFT - 1)) & (1<<TIF_UAC_NOFIX)));\
-	0; })
-
-#define GET_UNALIGN_CTL(task,value)	({				\
-	put_user((task_thread_info(task)->flags & (1 << TIF_UAC_NOPRINT))\
-		  >> ALPHA_UAC_SHIFT					\
-		 | (task_thread_info(task)->flags & (1 << TIF_UAC_SIGBUS))\
-		 >> (ALPHA_UAC_SHIFT + 1)				\
-		 | (task_thread_info(task)->flags & (1 << TIF_UAC_NOFIX))\
-		 >> (ALPHA_UAC_SHIFT - 1),				\
-		 (int __user *)(value));				\
-	})
-
-#endif /* __KERNEL__ */
-#endif /* _ALPHA_THREAD_INFO_H */
diff --git a/include/asm-arm/arch-aaec2000/debug-macro.S b/include/asm-arm/arch-aaec2000/debug-macro.S
deleted file mode 100644
index 7b1fce021d8a..000000000000
--- a/include/asm-arm/arch-aaec2000/debug-macro.S
+++ /dev/null
@@ -1,37 +0,0 @@
-/*  linux/include/asm-arm/arch-aaec2000/debug-macro.S
- *
- *  Debugging macro include header
- *
- *  Copyright (c) 2005 Nicolas Bellido Y Ortega
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License version 2 as
- *  published by the Free Software Foundation.
- */
-
-#include "hardware.h"
-		.macro	addruart,rx
-		mrc	p15, 0, \rx, c1, c0
-		tst	\rx, #1			@ MMU enabled?
-		moveq	\rx, #0x80000000		@ physical
-		movne	\rx, #io_p2v(0x80000000)	@ virtual
-		orr	\rx, \rx, #0x00000800
-		.endm
-
-		.macro	senduart,rd,rx
-		str	\rd, [\rx, #0]
-		.endm
-
-		.macro	busyuart,rd,rx
-1002:		ldr	\rd, [\rx, #0x10]
-		tst	\rd, #(1 << 7)
-		beq	1002b
-		.endm
-
-		.macro	waituart,rd,rx
-#if 0
-1001:		ldr	\rd, [\rx, #0x10]
-		tst	\rd, #(1 << 5)
-		beq	1001b
-#endif
-		.endm
diff --git a/include/asm-arm/arch-aaec2000/dma.h b/include/asm-arm/arch-aaec2000/dma.h
deleted file mode 100644
index e100b1e526fe..000000000000
--- a/include/asm-arm/arch-aaec2000/dma.h
+++ /dev/null
@@ -1,9 +0,0 @@
-/*
- *  linux/include/asm-arm/arch-aaec2000/dma.h
- *
- *  Copyright (c) 2005 Nicolas Bellido Y Ortega
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License version 2 as
- *  published by the Free Software Foundation.
- */
diff --git a/include/asm-arm/arch-aaec2000/entry-macro.S b/include/asm-arm/arch-aaec2000/entry-macro.S
deleted file mode 100644
index 83fdf68f6b7c..000000000000
--- a/include/asm-arm/arch-aaec2000/entry-macro.S
+++ /dev/null
@@ -1,40 +0,0 @@
-/*
- *  linux/include/asm-arm/arch-aaec2000/entry-macro.S
- *
- *  Low-level IRQ helper for aaec-2000 based platforms
- *
- *  Copyright (c) 2005 Nicolas Bellido Y Ortega
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License version 2 as
- *  published by the Free Software Foundation.
- *
- */
-#include <asm/arch/irqs.h>
-
-		.macro	disable_fiq
-		.endm
-
-		.macro  get_irqnr_preamble, base, tmp
-		.endm
-
-		.macro  arch_ret_to_user, tmp1, tmp2
-		.endm
-
-		.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
-		mov	r4, #0xf8000000
-		add	r4, r4, #0x00000500
-		mov	\base, r4
-		ldr	\irqstat, [\base, #0]
-		cmp	\irqstat, #0
-		bne	1001f
-		ldr	\irqnr, =NR_IRQS+1
-		b       1003f
-1001:		mov	\irqnr, #0
-1002:		ands	\tmp, \irqstat, #1
-		mov	\irqstat, \irqstat, LSR #1
-		add	\irqnr, \irqnr, #1
-		beq	1002b
-		sub	\irqnr, \irqnr, #1
-1003:
-		.endm
diff --git a/include/asm-arm/arch-aaec2000/hardware.h b/include/asm-arm/arch-aaec2000/hardware.h
deleted file mode 100644
index 153506fd06ed..000000000000
--- a/include/asm-arm/arch-aaec2000/hardware.h
+++ /dev/null
@@ -1,50 +0,0 @@
-/*
- *  linux/include/asm-arm/arch-aaec2000/hardware.h
- *
- *  Copyright (c) 2005 Nicolas Bellido Y Ortega
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License version 2 as
- *  published by the Free Software Foundation.
- */
-
-#ifndef __ASM_ARCH_HARDWARE_H
-#define __ASM_ARCH_HARDWARE_H
-
-#include <asm/sizes.h>
-#include <asm/arch/aaec2000.h>
-
-/* The kernel is loaded at physical address 0xf8000000.
- * We map the IO space a bit after
- */
-#define PIO_APB_BASE	0x80000000
-#define VIO_APB_BASE	0xf8000000
-#define IO_APB_LENGTH	0x2000
-#define PIO_AHB_BASE	0x80002000
-#define VIO_AHB_BASE	0xf8002000
-#define IO_AHB_LENGTH	0x2000
-
-#define VIO_BASE    VIO_APB_BASE
-#define PIO_BASE    PIO_APB_BASE
-
-#define io_p2v(x) ( (x) - PIO_BASE + VIO_BASE )
-#define io_v2p(x) ( (x) + PIO_BASE - VIO_BASE )
-
-#ifndef __ASSEMBLY__
-
-#include <asm/types.h>
-
-/* FIXME: Is it needed to optimize this a la pxa ?? */
-#define __REG(x)    (*((volatile u32 *)io_p2v(x)))
-#define __PREG(x)   (io_v2p((u32)&(x)))
-
-#else /* __ASSEMBLY__ */
-
-#define __REG(x)    io_p2v(x)
-#define __PREG(x)   io_v2p(x)
-
-#endif
-
-#include "aaec2000.h"
-
-#endif /* __ASM_ARCH_HARDWARE_H */
diff --git a/include/asm-arm/arch-aaec2000/io.h b/include/asm-arm/arch-aaec2000/io.h
deleted file mode 100644
index d710204ac747..000000000000
--- a/include/asm-arm/arch-aaec2000/io.h
+++ /dev/null
@@ -1,20 +0,0 @@
-/*
- *  linux/include/asm-arm/arch-aaec2000/io.h
- *
- *  Copied from asm/arch/sa1100/io.h
- */
-#ifndef __ASM_ARM_ARCH_IO_H
-#define __ASM_ARM_ARCH_IO_H
-
-#include <asm/hardware.h>
-
-#define IO_SPACE_LIMIT 0xffffffff
-
-/*
- * We don't actually have real ISA nor PCI buses, but there is so many
- * drivers out there that might just work if we fake them...
- */
-#define __io(a)			((void __iomem *)(a))
-#define __mem_pci(a)		(a)
-
-#endif
diff --git a/include/asm-arm/arch-aaec2000/irqs.h b/include/asm-arm/arch-aaec2000/irqs.h
deleted file mode 100644
index de252220e806..000000000000
--- a/include/asm-arm/arch-aaec2000/irqs.h
+++ /dev/null
@@ -1,46 +0,0 @@
-/*
- *  linux/include/asm-arm/arch-aaec2000/irqs.h
- *
- *  Copyright (c) 2005 Nicolas Bellido Y Ortega
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License version 2 as
- *  published by the Free Software Foundation.
- */
-
-#ifndef __ASM_ARCH_IRQS_H
-#define __ASM_ARCH_IRQS_H
-
-
-#define INT_GPIOF0_FIQ	0  /* External GPIO Port F O Fast Interrupt Input */
-#define INT_BL_FIQ	1  /* Battery Low Fast Interrupt */
-#define INT_WE_FIQ	2  /* Watchdog Expired Fast Interrupt */
-#define INT_MV_FIQ	3  /* Media Changed Interrupt */
-#define INT_SC		4  /* Sound Codec Interrupt */
-#define INT_GPIO1	5  /* GPIO Port F Configurable Int 1 */
-#define INT_GPIO2	6  /* GPIO Port F Configurable Int 2 */
-#define INT_GPIO3	7  /* GPIO Port F Configurable Int 3 */
-#define INT_TMR1_OFL	8  /* Timer 1 Overflow Interrupt */
-#define INT_TMR2_OFL	9  /* Timer 2 Overflow Interrupt */
-#define INT_RTC_CM	10 /* RTC Compare Match Interrupt */
-#define INT_TICK	11 /* 64Hz Tick Interrupt */
-#define INT_UART1	12 /* UART1 Interrupt */
-#define INT_UART2	13 /* UART2 & Modem State Changed Interrupt */
-#define INT_LCD		14 /* LCD Interrupt */
-#define INT_SSI		15 /* SSI End of Transfer Interrupt */
-#define INT_UART3	16 /* UART3 Interrupt */
-#define INT_SCI		17 /* SCI Interrupt */
-#define INT_AAC		18 /* Advanced Audio Codec Interrupt */
-#define INT_MMC		19 /* MMC Interrupt */
-#define INT_USB		20 /* USB Interrupt */
-#define INT_DMA		21 /* DMA Interrupt */
-#define INT_TMR3_UOFL	22 /* Timer 3 Underflow Interrupt */
-#define INT_GPIO4	23 /* GPIO Port F Configurable Int 4 */
-#define INT_GPIO5	24 /* GPIO Port F Configurable Int 4 */
-#define INT_GPIO6	25 /* GPIO Port F Configurable Int 4 */
-#define INT_GPIO7	26 /* GPIO Port F Configurable Int 4 */
-#define INT_BMI		27 /* BMI Interrupt */
-
-#define NR_IRQS		(INT_BMI + 1)
-
-#endif /* __ASM_ARCH_IRQS_H */
diff --git a/include/asm-arm/arch-aaec2000/memory.h b/include/asm-arm/arch-aaec2000/memory.h
deleted file mode 100644
index 9eceb4148922..000000000000
--- a/include/asm-arm/arch-aaec2000/memory.h
+++ /dev/null
@@ -1,30 +0,0 @@
-/*
- *  linux/include/asm-arm/arch-aaec2000/memory.h
- *
- *  Copyright (c) 2005 Nicolas Bellido Y Ortega
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License version 2 as
- *  published by the Free Software Foundation.
- */
-
-#ifndef __ASM_ARCH_MEMORY_H
-#define __ASM_ARCH_MEMORY_H
-
-
-#define PHYS_OFFSET	UL(0xf0000000)
-
-#define __virt_to_bus(x)	__virt_to_phys(x)
-#define __bus_to_virt(x)	__phys_to_virt(x)
-
-/*
- * The nodes are the followings:
- *
- *   node 0: 0xf000.0000 - 0xf3ff.ffff
- *   node 1: 0xf400.0000 - 0xf7ff.ffff
- *   node 2: 0xf800.0000 - 0xfbff.ffff
- *   node 3: 0xfc00.0000 - 0xffff.ffff
- */
-#define NODE_MEM_SIZE_BITS	26
-
-#endif /* __ASM_ARCH_MEMORY_H */
diff --git a/include/asm-arm/arch-aaec2000/system.h b/include/asm-arm/arch-aaec2000/system.h
deleted file mode 100644
index 08de97b407a8..000000000000
--- a/include/asm-arm/arch-aaec2000/system.h
+++ /dev/null
@@ -1,24 +0,0 @@
-/*
- *  linux/include/asm-arm/arch-aaed2000/system.h
- *
- *  Copyright (c) 2005 Nicolas Bellido Y Ortega
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License version 2 as
- *  published by the Free Software Foundation.
- */
-
-#ifndef __ASM_ARCH_SYSTEM_H
-#define __ASM_ARCH_SYSTEM_H
-
-static inline void arch_idle(void)
-{
-	cpu_do_idle();
-}
-
-static inline void arch_reset(char mode)
-{
-	cpu_reset(0);
-}
-
-#endif /* __ASM_ARCH_SYSTEM_H */
diff --git a/include/asm-arm/arch-aaec2000/timex.h b/include/asm-arm/arch-aaec2000/timex.h
deleted file mode 100644
index f5708b38fb7f..000000000000
--- a/include/asm-arm/arch-aaec2000/timex.h
+++ /dev/null
@@ -1,18 +0,0 @@
-/*
- *  linux/include/asm-arm/arch-aaec2000/timex.h
- *
- *  AAEC-2000 Architecture timex specification
- *
- *  Copyright (c) 2005 Nicolas Bellido Y Ortega
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License version 2 as
- *  published by the Free Software Foundation.
- */
-
-#ifndef __ASM_ARCH_TIMEX_H
-#define __ASM_ARCH_TIMEX_H
-
-#define CLOCK_TICK_RATE		508000
-
-#endif /* __ASM_ARCH_TIMEX_H */
diff --git a/include/asm-arm/arch-aaec2000/uncompress.h b/include/asm-arm/arch-aaec2000/uncompress.h
deleted file mode 100644
index 300f4bf3bc74..000000000000
--- a/include/asm-arm/arch-aaec2000/uncompress.h
+++ /dev/null
@@ -1,46 +0,0 @@
-/*
- *  linux/include/asm-arm/arch-aaec2000/uncompress.h
- *
- *  Copyright (c) 2005 Nicolas Bellido Y Ortega
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License version 2 as
- *  published by the Free Software Foundation.
- */
-
-#ifndef __ASM_ARCH_UNCOMPRESS_H
-#define __ASM_ARCH_UNCOMPRESS_H
-
-#include "hardware.h"
-
-#define UART(x)         (*(volatile unsigned long *)(serial_port + (x)))
-
-static void putc(int c)
-{
-	unsigned long serial_port;
-        do {
-		serial_port = _UART3_BASE;
-		if (UART(UART_CR) & UART_CR_EN) break;
-		serial_port = _UART1_BASE;
-		if (UART(UART_CR) & UART_CR_EN) break;
-		serial_port = _UART2_BASE;
-		if (UART(UART_CR) & UART_CR_EN) break;
-		return;
-	} while (0);
-
-	/* wait for space in the UART's transmitter */
-	while ((UART(UART_SR) & UART_SR_TxFF))
-		barrier();
-
-	/* send the character out. */
-	UART(UART_DR) = c;
-}
-
-static inline void flush(void)
-{
-}
-
-#define arch_decomp_setup()
-#define arch_decomp_wdog()
-
-#endif /* __ASM_ARCH_UNCOMPRESS_H */
diff --git a/include/asm-arm/arch-aaec2000/vmalloc.h b/include/asm-arm/arch-aaec2000/vmalloc.h
deleted file mode 100644
index ecb991e2e4ff..000000000000
--- a/include/asm-arm/arch-aaec2000/vmalloc.h
+++ /dev/null
@@ -1,16 +0,0 @@
-/*
- *  linux/include/asm-arm/arch-aaec2000/vmalloc.h
- *
- *  Copyright (c) 2005 Nicolas Bellido Y Ortega
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License version 2 as
- *  published by the Free Software Foundation.
- */
-
-#ifndef __ASM_ARCH_VMALLOC_H
-#define __ASM_ARCH_VMALLOC_H
-
-#define VMALLOC_END		(PAGE_OFFSET + 0x10000000)
-
-#endif /* __ASM_ARCH_VMALLOC_H */
diff --git a/include/asm-arm/arch-at91/at91_ecc.h b/include/asm-arm/arch-at91/at91_ecc.h
deleted file mode 100644
index 1e5a8caca2d1..000000000000
--- a/include/asm-arm/arch-at91/at91_ecc.h
+++ /dev/null
@@ -1,38 +0,0 @@
-/*
- * include/asm-arm/arch-at91/at91_ecc.h
- *
- * Error Corrected Code Controller (ECC) - System peripherals regsters.
- * Based on AT91SAM9260 datasheet revision B.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- */
-
-#ifndef AT91_ECC_H
-#define AT91_ECC_H
-
-#define AT91_ECC_CR		0x00			/* Control register */
-#define		AT91_ECC_RST		(1 << 0)		/* Reset parity */
-
-#define AT91_ECC_MR		0x04			/* Mode register */
-#define		AT91_ECC_PAGESIZE	(3 << 0)		/* Page Size */
-#define			AT91_ECC_PAGESIZE_528		(0)
-#define			AT91_ECC_PAGESIZE_1056		(1)
-#define			AT91_ECC_PAGESIZE_2112		(2)
-#define			AT91_ECC_PAGESIZE_4224		(3)
-
-#define AT91_ECC_SR		0x08			/* Status register */
-#define		AT91_ECC_RECERR		(1 << 0)		/* Recoverable Error */
-#define		AT91_ECC_ECCERR		(1 << 1)		/* ECC Single Bit Error */
-#define		AT91_ECC_MULERR		(1 << 2)		/* Multiple Errors */
-
-#define AT91_ECC_PR		0x0c			/* Parity register */
-#define		AT91_ECC_BITADDR	(0xf << 0)		/* Bit Error Address */
-#define		AT91_ECC_WORDADDR	(0xfff << 4)		/* Word Error Address */
-
-#define AT91_ECC_NPR		0x10			/* NParity register */
-#define		AT91_ECC_NPARITY	(0xffff << 0)		/* NParity */
-
-#endif
diff --git a/include/asm-arm/arch-at91/board.h b/include/asm-arm/arch-at91/board.h
deleted file mode 100644
index 94de788da76e..000000000000
--- a/include/asm-arm/arch-at91/board.h
+++ /dev/null
@@ -1,172 +0,0 @@
-/*
- * include/asm-arm/arch-at91/board.h
- *
- *  Copyright (C) 2005 HP Labs
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-/*
- * These are data structures found in platform_device.dev.platform_data,
- * and describing board-specific data needed by drivers.  For example,
- * which pin is used for a given GPIO role.
- *
- * In 2.6, drivers should strongly avoid board-specific knowledge so
- * that supporting new boards normally won't require driver patches.
- * Most board-specific knowledge should be in arch/.../board-*.c files.
- */
-
-#ifndef __ASM_ARCH_BOARD_H
-#define __ASM_ARCH_BOARD_H
-
-#include <linux/mtd/partitions.h>
-#include <linux/device.h>
-#include <linux/i2c.h>
-#include <linux/leds.h>
-#include <linux/spi/spi.h>
-#include <linux/usb/atmel_usba_udc.h>
-
- /* USB Device */
-struct at91_udc_data {
-	u8	vbus_pin;		/* high == host powering us */
-	u8	pullup_pin;		/* active == D+ pulled up */
-	u8	pullup_active_low;	/* true == pullup_pin is active low */
-};
-extern void __init at91_add_device_udc(struct at91_udc_data *data);
-
- /* USB High Speed Device */
-extern void __init at91_add_device_usba(struct usba_platform_data *data);
-
- /* Compact Flash */
-struct at91_cf_data {
-	u8	irq_pin;		/* I/O IRQ */
-	u8	det_pin;		/* Card detect */
-	u8	vcc_pin;		/* power switching */
-	u8	rst_pin;		/* card reset */
-	u8	chipselect;		/* EBI Chip Select number */
-};
-extern void __init at91_add_device_cf(struct at91_cf_data *data);
-
- /* MMC / SD */
-struct at91_mmc_data {
-	u8		det_pin;	/* card detect IRQ */
-	unsigned	slot_b:1;	/* uses Slot B */
-	unsigned	wire4:1;	/* (SD) supports DAT0..DAT3 */
-	u8		wp_pin;		/* (SD) writeprotect detect */
-	u8		vcc_pin;	/* power switching (high == on) */
-};
-extern void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data);
-
- /* Ethernet (EMAC & MACB) */
-struct at91_eth_data {
-	u32		phy_mask;
-	u8		phy_irq_pin;	/* PHY IRQ */
-	u8		is_rmii;	/* using RMII interface? */
-};
-extern void __init at91_add_device_eth(struct at91_eth_data *data);
-
-#if defined(CONFIG_ARCH_AT91SAM9260) || defined(CONFIG_ARCH_AT91SAM9263) || defined(CONFIG_ARCH_AT91SAM9G20) || defined(CONFIG_ARCH_AT91CAP9)
-#define eth_platform_data	at91_eth_data
-#endif
-
- /* USB Host */
-struct at91_usbh_data {
-	u8		ports;		/* number of ports on root hub */
-	u8		vbus_pin[];	/* port power-control pin */
-};
-extern void __init at91_add_device_usbh(struct at91_usbh_data *data);
-
- /* NAND / SmartMedia */
-struct at91_nand_data {
-	u8		enable_pin;	/* chip enable */
-	u8		det_pin;	/* card detect */
-	u8		rdy_pin;	/* ready/busy */
-	u8		ale;		/* address line number connected to ALE */
-	u8		cle;		/* address line number connected to CLE */
-	u8		bus_width_16;	/* buswidth is 16 bit */
-	struct mtd_partition* (*partition_info)(int, int*);
-};
-extern void __init at91_add_device_nand(struct at91_nand_data *data);
-
- /* I2C*/
-extern void __init at91_add_device_i2c(struct i2c_board_info *devices, int nr_devices);
-
- /* SPI */
-extern void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices);
-
- /* Serial */
-#define ATMEL_UART_CTS	0x01
-#define ATMEL_UART_RTS	0x02
-#define ATMEL_UART_DSR	0x04
-#define ATMEL_UART_DTR	0x08
-#define ATMEL_UART_DCD	0x10
-#define ATMEL_UART_RI	0x20
-
-extern void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins);
-extern void __init at91_set_serial_console(unsigned portnr);
-
-struct at91_uart_config {
-	unsigned short	console_tty;	/* tty number of serial console */
-	unsigned short	nr_tty;		/* number of serial tty's */
-	short		tty_map[];	/* map UART to tty number */
-};
-extern struct platform_device *atmel_default_console_device;
-extern void __init __deprecated at91_init_serial(struct at91_uart_config *config);
-
-struct atmel_uart_data {
-	short		use_dma_tx;	/* use transmit DMA? */
-	short		use_dma_rx;	/* use receive DMA? */
-	void __iomem	*regs;		/* virtual base address, if any */
-};
-extern void __init at91_add_device_serial(void);
-
-/*
- * SSC -- accessed through ssc_request(id).  Drivers don't bind to SSC
- * platform devices.  Their SSC ID is part of their configuration data,
- * along with information about which SSC signals they should use.
- */
-#define ATMEL_SSC_TK	0x01
-#define ATMEL_SSC_TF	0x02
-#define ATMEL_SSC_TD	0x04
-#define ATMEL_SSC_TX	(ATMEL_SSC_TK | ATMEL_SSC_TF | ATMEL_SSC_TD)
-
-#define ATMEL_SSC_RK	0x10
-#define ATMEL_SSC_RF	0x20
-#define ATMEL_SSC_RD	0x40
-#define ATMEL_SSC_RX	(ATMEL_SSC_RK | ATMEL_SSC_RF | ATMEL_SSC_RD)
-
-extern void __init at91_add_device_ssc(unsigned id, unsigned pins);
-
- /* LCD Controller */
-struct atmel_lcdfb_info;
-extern void __init at91_add_device_lcdc(struct atmel_lcdfb_info *data);
-
- /* AC97 */
-struct atmel_ac97_data {
-	u8		reset_pin;	/* reset */
-};
-extern void __init at91_add_device_ac97(struct atmel_ac97_data *data);
-
- /* ISI */
-extern void __init at91_add_device_isi(void);
-
- /* LEDs */
-extern void __init at91_init_leds(u8 cpu_led, u8 timer_led);
-extern void __init at91_gpio_leds(struct gpio_led *leds, int nr);
-
-/* FIXME: this needs a better location, but gets stuff building again */
-extern int at91_suspend_entering_slow_clock(void);
-
-#endif
diff --git a/include/asm-arm/arch-at91/cpu.h b/include/asm-arm/arch-at91/cpu.h
deleted file mode 100644
index 52df794205cb..000000000000
--- a/include/asm-arm/arch-at91/cpu.h
+++ /dev/null
@@ -1,103 +0,0 @@
-/*
- * include/asm-arm/arch-at91/cpu.h
- *
- *  Copyright (C) 2006 SAN People
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- */
-
-#ifndef __ASM_ARCH_CPU_H
-#define __ASM_ARCH_CPU_H
-
-#include <asm/hardware.h>
-#include <asm/arch/at91_dbgu.h>
-
-
-#define ARCH_ID_AT91RM9200	0x09290780
-#define ARCH_ID_AT91SAM9260	0x019803a0
-#define ARCH_ID_AT91SAM9261	0x019703a0
-#define ARCH_ID_AT91SAM9263	0x019607a0
-#define ARCH_ID_AT91SAM9G20	0x019905a0
-#define ARCH_ID_AT91SAM9RL64	0x019b03a0
-#define ARCH_ID_AT91CAP9	0x039A03A0
-
-#define ARCH_ID_AT91SAM9XE128	0x329973a0
-#define ARCH_ID_AT91SAM9XE256	0x329a93a0
-#define ARCH_ID_AT91SAM9XE512	0x329aa3a0
-
-#define ARCH_ID_AT91M40800	0x14080044
-#define ARCH_ID_AT91R40807	0x44080746
-#define ARCH_ID_AT91M40807	0x14080745
-#define ARCH_ID_AT91R40008	0x44000840
-
-static inline unsigned long at91_cpu_identify(void)
-{
-	return (at91_sys_read(AT91_DBGU_CIDR) & ~AT91_CIDR_VERSION);
-}
-
-
-#define ARCH_FAMILY_AT91X92	0x09200000
-#define ARCH_FAMILY_AT91SAM9	0x01900000
-#define ARCH_FAMILY_AT91SAM9XE	0x02900000
-
-static inline unsigned long at91_arch_identify(void)
-{
-	return (at91_sys_read(AT91_DBGU_CIDR) & AT91_CIDR_ARCH);
-}
-
-
-#ifdef CONFIG_ARCH_AT91RM9200
-#define cpu_is_at91rm9200()	(at91_cpu_identify() == ARCH_ID_AT91RM9200)
-#else
-#define cpu_is_at91rm9200()	(0)
-#endif
-
-#ifdef CONFIG_ARCH_AT91SAM9260
-#define cpu_is_at91sam9xe()	(at91_arch_identify() == ARCH_FAMILY_AT91SAM9XE)
-#define cpu_is_at91sam9260()	((at91_cpu_identify() == ARCH_ID_AT91SAM9260) || cpu_is_at91sam9xe())
-#else
-#define cpu_is_at91sam9xe()	(0)
-#define cpu_is_at91sam9260()	(0)
-#endif
-
-#ifdef CONFIG_ARCH_AT91SAM9G20
-#define cpu_is_at91sam9g20()	(at91_cpu_identify() == ARCH_ID_AT91SAM9G20)
-#else
-#define cpu_is_at91sam9g20()	(0)
-#endif
-
-#ifdef CONFIG_ARCH_AT91SAM9261
-#define cpu_is_at91sam9261()	(at91_cpu_identify() == ARCH_ID_AT91SAM9261)
-#else
-#define cpu_is_at91sam9261()	(0)
-#endif
-
-#ifdef CONFIG_ARCH_AT91SAM9263
-#define cpu_is_at91sam9263()	(at91_cpu_identify() == ARCH_ID_AT91SAM9263)
-#else
-#define cpu_is_at91sam9263()	(0)
-#endif
-
-#ifdef CONFIG_ARCH_AT91SAM9RL
-#define cpu_is_at91sam9rl()	(at91_cpu_identify() == ARCH_ID_AT91SAM9RL64)
-#else
-#define cpu_is_at91sam9rl()	(0)
-#endif
-
-#ifdef CONFIG_ARCH_AT91CAP9
-#define cpu_is_at91cap9()	(at91_cpu_identify() == ARCH_ID_AT91CAP9)
-#else
-#define cpu_is_at91cap9()	(0)
-#endif
-
-/*
- * Since this is ARM, we will never run on any AVR32 CPU. But these
- * definitions may reduce clutter in common drivers.
- */
-#define cpu_is_at32ap7000()	(0)
-
-#endif
diff --git a/include/asm-arm/arch-at91/debug-macro.S b/include/asm-arm/arch-at91/debug-macro.S
deleted file mode 100644
index 13e9f5e1d4ff..000000000000
--- a/include/asm-arm/arch-at91/debug-macro.S
+++ /dev/null
@@ -1,39 +0,0 @@
-/*
- * include/asm-arm/arch-at91/debug-macro.S
- *
- *  Copyright (C) 2003-2005 SAN People
- *
- * Debugging macro include header
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
-*/
-
-#include <asm/hardware.h>
-#include <asm/arch/at91_dbgu.h>
-
-	.macro	addruart,rx
-	mrc	p15, 0, \rx, c1, c0
-	tst	\rx, #1						@ MMU enabled?
-	ldreq	\rx, =(AT91_BASE_SYS + AT91_DBGU)		@ System peripherals (phys address)
-	ldrne	\rx, =(AT91_VA_BASE_SYS	+ AT91_DBGU)		@ System peripherals (virt address)
-	.endm
-
-	.macro	senduart,rd,rx
-	strb	\rd, [\rx, #(AT91_DBGU_THR - AT91_DBGU)]	@ Write to Transmitter Holding Register
-	.endm
-
-	.macro	waituart,rd,rx
-1001:	ldr	\rd, [\rx, #(AT91_DBGU_SR - AT91_DBGU)]		@ Read Status Register
-	tst	\rd, #AT91_DBGU_TXRDY				@ DBGU_TXRDY = 1 when ready to transmit
-	beq	1001b
-	.endm
-
-	.macro	busyuart,rd,rx
-1001:	ldr	\rd, [\rx, #(AT91_DBGU_SR - AT91_DBGU)]		@ Read Status Register
-	tst	\rd, #AT91_DBGU_TXEMPTY				@ DBGU_TXEMPTY = 1 when transmission complete
-	beq	1001b
-	.endm
-
diff --git a/include/asm-arm/arch-at91/dma.h b/include/asm-arm/arch-at91/dma.h
deleted file mode 100644
index 774565412beb..000000000000
--- a/include/asm-arm/arch-at91/dma.h
+++ /dev/null
@@ -1,19 +0,0 @@
-/*
- * include/asm-arm/arch-at91/dma.h
- *
- *  Copyright (C) 2003 SAN People
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
diff --git a/include/asm-arm/arch-at91/entry-macro.S b/include/asm-arm/arch-at91/entry-macro.S
deleted file mode 100644
index 1005eee6219b..000000000000
--- a/include/asm-arm/arch-at91/entry-macro.S
+++ /dev/null
@@ -1,32 +0,0 @@
-/*
- * include/asm-arm/arch-at91/entry-macro.S
- *
- *  Copyright (C) 2003-2005 SAN People
- *
- * Low-level IRQ helper macros for AT91RM9200 platforms
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <asm/hardware.h>
-#include <asm/arch/at91_aic.h>
-
-	.macro	disable_fiq
-	.endm
-
-	.macro  get_irqnr_preamble, base, tmp
-	ldr	\base, =(AT91_VA_BASE_SYS + AT91_AIC)		@ base virtual address of AIC peripheral
-	.endm
-
-	.macro  arch_ret_to_user, tmp1, tmp2
-	.endm
-
-	.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
-	ldr	\irqnr, [\base, #(AT91_AIC_IVR - AT91_AIC)]	@ read IRQ vector register: de-asserts nIRQ to processor (and clears interrupt)
-	ldr	\irqstat, [\base, #(AT91_AIC_ISR - AT91_AIC)]	@ read interrupt source number
-	teq	\irqstat, #0					@ ISR is 0 when no current interrupt, or spurious interrupt
-	streq	\tmp, [\base, #(AT91_AIC_EOICR - AT91_AIC)]	@ not going to be handled further, then ACK it now.
-	.endm
-
diff --git a/include/asm-arm/arch-at91/gpio.h b/include/asm-arm/arch-at91/gpio.h
deleted file mode 100644
index 0a241e2fb672..000000000000
--- a/include/asm-arm/arch-at91/gpio.h
+++ /dev/null
@@ -1,252 +0,0 @@
-/*
- * include/asm-arm/arch-at91/gpio.h
- *
- *  Copyright (C) 2005 HP Labs
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- */
-
-#ifndef __ASM_ARCH_AT91RM9200_GPIO_H
-#define __ASM_ARCH_AT91RM9200_GPIO_H
-
-#include <asm/irq.h>
-
-#define PIN_BASE		NR_AIC_IRQS
-
-#define MAX_GPIO_BANKS		5
-
-/* these pin numbers double as IRQ numbers, like AT91xxx_ID_* values */
-
-#define	AT91_PIN_PA0	(PIN_BASE + 0x00 + 0)
-#define	AT91_PIN_PA1	(PIN_BASE + 0x00 + 1)
-#define	AT91_PIN_PA2	(PIN_BASE + 0x00 + 2)
-#define	AT91_PIN_PA3	(PIN_BASE + 0x00 + 3)
-#define	AT91_PIN_PA4	(PIN_BASE + 0x00 + 4)
-#define	AT91_PIN_PA5	(PIN_BASE + 0x00 + 5)
-#define	AT91_PIN_PA6	(PIN_BASE + 0x00 + 6)
-#define	AT91_PIN_PA7	(PIN_BASE + 0x00 + 7)
-#define	AT91_PIN_PA8	(PIN_BASE + 0x00 + 8)
-#define	AT91_PIN_PA9	(PIN_BASE + 0x00 + 9)
-#define	AT91_PIN_PA10	(PIN_BASE + 0x00 + 10)
-#define	AT91_PIN_PA11	(PIN_BASE + 0x00 + 11)
-#define	AT91_PIN_PA12	(PIN_BASE + 0x00 + 12)
-#define	AT91_PIN_PA13	(PIN_BASE + 0x00 + 13)
-#define	AT91_PIN_PA14	(PIN_BASE + 0x00 + 14)
-#define	AT91_PIN_PA15	(PIN_BASE + 0x00 + 15)
-#define	AT91_PIN_PA16	(PIN_BASE + 0x00 + 16)
-#define	AT91_PIN_PA17	(PIN_BASE + 0x00 + 17)
-#define	AT91_PIN_PA18	(PIN_BASE + 0x00 + 18)
-#define	AT91_PIN_PA19	(PIN_BASE + 0x00 + 19)
-#define	AT91_PIN_PA20	(PIN_BASE + 0x00 + 20)
-#define	AT91_PIN_PA21	(PIN_BASE + 0x00 + 21)
-#define	AT91_PIN_PA22	(PIN_BASE + 0x00 + 22)
-#define	AT91_PIN_PA23	(PIN_BASE + 0x00 + 23)
-#define	AT91_PIN_PA24	(PIN_BASE + 0x00 + 24)
-#define	AT91_PIN_PA25	(PIN_BASE + 0x00 + 25)
-#define	AT91_PIN_PA26	(PIN_BASE + 0x00 + 26)
-#define	AT91_PIN_PA27	(PIN_BASE + 0x00 + 27)
-#define	AT91_PIN_PA28	(PIN_BASE + 0x00 + 28)
-#define	AT91_PIN_PA29	(PIN_BASE + 0x00 + 29)
-#define	AT91_PIN_PA30	(PIN_BASE + 0x00 + 30)
-#define	AT91_PIN_PA31	(PIN_BASE + 0x00 + 31)
-
-#define	AT91_PIN_PB0	(PIN_BASE + 0x20 + 0)
-#define	AT91_PIN_PB1	(PIN_BASE + 0x20 + 1)
-#define	AT91_PIN_PB2	(PIN_BASE + 0x20 + 2)
-#define	AT91_PIN_PB3	(PIN_BASE + 0x20 + 3)
-#define	AT91_PIN_PB4	(PIN_BASE + 0x20 + 4)
-#define	AT91_PIN_PB5	(PIN_BASE + 0x20 + 5)
-#define	AT91_PIN_PB6	(PIN_BASE + 0x20 + 6)
-#define	AT91_PIN_PB7	(PIN_BASE + 0x20 + 7)
-#define	AT91_PIN_PB8	(PIN_BASE + 0x20 + 8)
-#define	AT91_PIN_PB9	(PIN_BASE + 0x20 + 9)
-#define	AT91_PIN_PB10	(PIN_BASE + 0x20 + 10)
-#define	AT91_PIN_PB11	(PIN_BASE + 0x20 + 11)
-#define	AT91_PIN_PB12	(PIN_BASE + 0x20 + 12)
-#define	AT91_PIN_PB13	(PIN_BASE + 0x20 + 13)
-#define	AT91_PIN_PB14	(PIN_BASE + 0x20 + 14)
-#define	AT91_PIN_PB15	(PIN_BASE + 0x20 + 15)
-#define	AT91_PIN_PB16	(PIN_BASE + 0x20 + 16)
-#define	AT91_PIN_PB17	(PIN_BASE + 0x20 + 17)
-#define	AT91_PIN_PB18	(PIN_BASE + 0x20 + 18)
-#define	AT91_PIN_PB19	(PIN_BASE + 0x20 + 19)
-#define	AT91_PIN_PB20	(PIN_BASE + 0x20 + 20)
-#define	AT91_PIN_PB21	(PIN_BASE + 0x20 + 21)
-#define	AT91_PIN_PB22	(PIN_BASE + 0x20 + 22)
-#define	AT91_PIN_PB23	(PIN_BASE + 0x20 + 23)
-#define	AT91_PIN_PB24	(PIN_BASE + 0x20 + 24)
-#define	AT91_PIN_PB25	(PIN_BASE + 0x20 + 25)
-#define	AT91_PIN_PB26	(PIN_BASE + 0x20 + 26)
-#define	AT91_PIN_PB27	(PIN_BASE + 0x20 + 27)
-#define	AT91_PIN_PB28	(PIN_BASE + 0x20 + 28)
-#define	AT91_PIN_PB29	(PIN_BASE + 0x20 + 29)
-#define	AT91_PIN_PB30	(PIN_BASE + 0x20 + 30)
-#define	AT91_PIN_PB31	(PIN_BASE + 0x20 + 31)
-
-#define	AT91_PIN_PC0	(PIN_BASE + 0x40 + 0)
-#define	AT91_PIN_PC1	(PIN_BASE + 0x40 + 1)
-#define	AT91_PIN_PC2	(PIN_BASE + 0x40 + 2)
-#define	AT91_PIN_PC3	(PIN_BASE + 0x40 + 3)
-#define	AT91_PIN_PC4	(PIN_BASE + 0x40 + 4)
-#define	AT91_PIN_PC5	(PIN_BASE + 0x40 + 5)
-#define	AT91_PIN_PC6	(PIN_BASE + 0x40 + 6)
-#define	AT91_PIN_PC7	(PIN_BASE + 0x40 + 7)
-#define	AT91_PIN_PC8	(PIN_BASE + 0x40 + 8)
-#define	AT91_PIN_PC9	(PIN_BASE + 0x40 + 9)
-#define	AT91_PIN_PC10	(PIN_BASE + 0x40 + 10)
-#define	AT91_PIN_PC11	(PIN_BASE + 0x40 + 11)
-#define	AT91_PIN_PC12	(PIN_BASE + 0x40 + 12)
-#define	AT91_PIN_PC13	(PIN_BASE + 0x40 + 13)
-#define	AT91_PIN_PC14	(PIN_BASE + 0x40 + 14)
-#define	AT91_PIN_PC15	(PIN_BASE + 0x40 + 15)
-#define	AT91_PIN_PC16	(PIN_BASE + 0x40 + 16)
-#define	AT91_PIN_PC17	(PIN_BASE + 0x40 + 17)
-#define	AT91_PIN_PC18	(PIN_BASE + 0x40 + 18)
-#define	AT91_PIN_PC19	(PIN_BASE + 0x40 + 19)
-#define	AT91_PIN_PC20	(PIN_BASE + 0x40 + 20)
-#define	AT91_PIN_PC21	(PIN_BASE + 0x40 + 21)
-#define	AT91_PIN_PC22	(PIN_BASE + 0x40 + 22)
-#define	AT91_PIN_PC23	(PIN_BASE + 0x40 + 23)
-#define	AT91_PIN_PC24	(PIN_BASE + 0x40 + 24)
-#define	AT91_PIN_PC25	(PIN_BASE + 0x40 + 25)
-#define	AT91_PIN_PC26	(PIN_BASE + 0x40 + 26)
-#define	AT91_PIN_PC27	(PIN_BASE + 0x40 + 27)
-#define	AT91_PIN_PC28	(PIN_BASE + 0x40 + 28)
-#define	AT91_PIN_PC29	(PIN_BASE + 0x40 + 29)
-#define	AT91_PIN_PC30	(PIN_BASE + 0x40 + 30)
-#define	AT91_PIN_PC31	(PIN_BASE + 0x40 + 31)
-
-#define	AT91_PIN_PD0	(PIN_BASE + 0x60 + 0)
-#define	AT91_PIN_PD1	(PIN_BASE + 0x60 + 1)
-#define	AT91_PIN_PD2	(PIN_BASE + 0x60 + 2)
-#define	AT91_PIN_PD3	(PIN_BASE + 0x60 + 3)
-#define	AT91_PIN_PD4	(PIN_BASE + 0x60 + 4)
-#define	AT91_PIN_PD5	(PIN_BASE + 0x60 + 5)
-#define	AT91_PIN_PD6	(PIN_BASE + 0x60 + 6)
-#define	AT91_PIN_PD7	(PIN_BASE + 0x60 + 7)
-#define	AT91_PIN_PD8	(PIN_BASE + 0x60 + 8)
-#define	AT91_PIN_PD9	(PIN_BASE + 0x60 + 9)
-#define	AT91_PIN_PD10	(PIN_BASE + 0x60 + 10)
-#define	AT91_PIN_PD11	(PIN_BASE + 0x60 + 11)
-#define	AT91_PIN_PD12	(PIN_BASE + 0x60 + 12)
-#define	AT91_PIN_PD13	(PIN_BASE + 0x60 + 13)
-#define	AT91_PIN_PD14	(PIN_BASE + 0x60 + 14)
-#define	AT91_PIN_PD15	(PIN_BASE + 0x60 + 15)
-#define	AT91_PIN_PD16	(PIN_BASE + 0x60 + 16)
-#define	AT91_PIN_PD17	(PIN_BASE + 0x60 + 17)
-#define	AT91_PIN_PD18	(PIN_BASE + 0x60 + 18)
-#define	AT91_PIN_PD19	(PIN_BASE + 0x60 + 19)
-#define	AT91_PIN_PD20	(PIN_BASE + 0x60 + 20)
-#define	AT91_PIN_PD21	(PIN_BASE + 0x60 + 21)
-#define	AT91_PIN_PD22	(PIN_BASE + 0x60 + 22)
-#define	AT91_PIN_PD23	(PIN_BASE + 0x60 + 23)
-#define	AT91_PIN_PD24	(PIN_BASE + 0x60 + 24)
-#define	AT91_PIN_PD25	(PIN_BASE + 0x60 + 25)
-#define	AT91_PIN_PD26	(PIN_BASE + 0x60 + 26)
-#define	AT91_PIN_PD27	(PIN_BASE + 0x60 + 27)
-#define	AT91_PIN_PD28	(PIN_BASE + 0x60 + 28)
-#define	AT91_PIN_PD29	(PIN_BASE + 0x60 + 29)
-#define	AT91_PIN_PD30	(PIN_BASE + 0x60 + 30)
-#define	AT91_PIN_PD31	(PIN_BASE + 0x60 + 31)
-
-#define	AT91_PIN_PE0	(PIN_BASE + 0x80 + 0)
-#define	AT91_PIN_PE1	(PIN_BASE + 0x80 + 1)
-#define	AT91_PIN_PE2	(PIN_BASE + 0x80 + 2)
-#define	AT91_PIN_PE3	(PIN_BASE + 0x80 + 3)
-#define	AT91_PIN_PE4	(PIN_BASE + 0x80 + 4)
-#define	AT91_PIN_PE5	(PIN_BASE + 0x80 + 5)
-#define	AT91_PIN_PE6	(PIN_BASE + 0x80 + 6)
-#define	AT91_PIN_PE7	(PIN_BASE + 0x80 + 7)
-#define	AT91_PIN_PE8	(PIN_BASE + 0x80 + 8)
-#define	AT91_PIN_PE9	(PIN_BASE + 0x80 + 9)
-#define	AT91_PIN_PE10	(PIN_BASE + 0x80 + 10)
-#define	AT91_PIN_PE11	(PIN_BASE + 0x80 + 11)
-#define	AT91_PIN_PE12	(PIN_BASE + 0x80 + 12)
-#define	AT91_PIN_PE13	(PIN_BASE + 0x80 + 13)
-#define	AT91_PIN_PE14	(PIN_BASE + 0x80 + 14)
-#define	AT91_PIN_PE15	(PIN_BASE + 0x80 + 15)
-#define	AT91_PIN_PE16	(PIN_BASE + 0x80 + 16)
-#define	AT91_PIN_PE17	(PIN_BASE + 0x80 + 17)
-#define	AT91_PIN_PE18	(PIN_BASE + 0x80 + 18)
-#define	AT91_PIN_PE19	(PIN_BASE + 0x80 + 19)
-#define	AT91_PIN_PE20	(PIN_BASE + 0x80 + 20)
-#define	AT91_PIN_PE21	(PIN_BASE + 0x80 + 21)
-#define	AT91_PIN_PE22	(PIN_BASE + 0x80 + 22)
-#define	AT91_PIN_PE23	(PIN_BASE + 0x80 + 23)
-#define	AT91_PIN_PE24	(PIN_BASE + 0x80 + 24)
-#define	AT91_PIN_PE25	(PIN_BASE + 0x80 + 25)
-#define	AT91_PIN_PE26	(PIN_BASE + 0x80 + 26)
-#define	AT91_PIN_PE27	(PIN_BASE + 0x80 + 27)
-#define	AT91_PIN_PE28	(PIN_BASE + 0x80 + 28)
-#define	AT91_PIN_PE29	(PIN_BASE + 0x80 + 29)
-#define	AT91_PIN_PE30	(PIN_BASE + 0x80 + 30)
-#define	AT91_PIN_PE31	(PIN_BASE + 0x80 + 31)
-
-#ifndef __ASSEMBLY__
-/* setup setup routines, called from board init or driver probe() */
-extern int __init_or_module at91_set_GPIO_periph(unsigned pin, int use_pullup);
-extern int __init_or_module at91_set_A_periph(unsigned pin, int use_pullup);
-extern int __init_or_module at91_set_B_periph(unsigned pin, int use_pullup);
-extern int __init_or_module at91_set_gpio_input(unsigned pin, int use_pullup);
-extern int __init_or_module at91_set_gpio_output(unsigned pin, int value);
-extern int __init_or_module at91_set_deglitch(unsigned pin, int is_on);
-extern int __init_or_module at91_set_multi_drive(unsigned pin, int is_on);
-
-/* callable at any time */
-extern int at91_set_gpio_value(unsigned pin, int value);
-extern int at91_get_gpio_value(unsigned pin);
-
-/* callable only from core power-management code */
-extern void at91_gpio_suspend(void);
-extern void at91_gpio_resume(void);
-
-/*-------------------------------------------------------------------------*/
-
-/* wrappers for "new style" GPIO calls. the old AT91-specfic ones should
- * eventually be removed (along with this errno.h inclusion), and the
- * gpio request/free calls should probably be implemented.
- */
-
-#include <asm/errno.h>
-
-static inline int gpio_request(unsigned gpio, const char *label)
-{
-	return 0;
-}
-
-static inline void gpio_free(unsigned gpio)
-{
-}
-
-extern int gpio_direction_input(unsigned gpio);
-extern int gpio_direction_output(unsigned gpio, int value);
-
-static inline int gpio_get_value(unsigned gpio)
-{
-	return at91_get_gpio_value(gpio);
-}
-
-static inline void gpio_set_value(unsigned gpio, int value)
-{
-	at91_set_gpio_value(gpio, value);
-}
-
-#include <asm-generic/gpio.h>		/* cansleep wrappers */
-
-static inline int gpio_to_irq(unsigned gpio)
-{
-	return gpio;
-}
-
-static inline int irq_to_gpio(unsigned irq)
-{
-	return irq;
-}
-
-#endif	/* __ASSEMBLY__ */
-
-#endif
diff --git a/include/asm-arm/arch-at91/hardware.h b/include/asm-arm/arch-at91/hardware.h
deleted file mode 100644
index 016a3a3f6633..000000000000
--- a/include/asm-arm/arch-at91/hardware.h
+++ /dev/null
@@ -1,92 +0,0 @@
-/*
- * include/asm-arm/arch-at91/hardware.h
- *
- *  Copyright (C) 2003 SAN People
- *  Copyright (C) 2003 ATMEL
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- */
-
-#ifndef __ASM_ARCH_HARDWARE_H
-#define __ASM_ARCH_HARDWARE_H
-
-#include <asm/sizes.h>
-
-#if defined(CONFIG_ARCH_AT91RM9200)
-#include <asm/arch/at91rm9200.h>
-#elif defined(CONFIG_ARCH_AT91SAM9260) || defined(CONFIG_ARCH_AT91SAM9G20)
-#include <asm/arch/at91sam9260.h>
-#elif defined(CONFIG_ARCH_AT91SAM9261)
-#include <asm/arch/at91sam9261.h>
-#elif defined(CONFIG_ARCH_AT91SAM9263)
-#include <asm/arch/at91sam9263.h>
-#elif defined(CONFIG_ARCH_AT91SAM9RL)
-#include <asm/arch/at91sam9rl.h>
-#elif defined(CONFIG_ARCH_AT91CAP9)
-#include <asm/arch/at91cap9.h>
-#elif defined(CONFIG_ARCH_AT91X40)
-#include <asm/arch/at91x40.h>
-#else
-#error "Unsupported AT91 processor"
-#endif
-
-
-#ifdef CONFIG_MMU
-/*
- * Remap the peripherals from address 0xFFF78000 .. 0xFFFFFFFF
- * to 0xFEF78000 .. 0xFF000000.  (544Kb)
- */
-#define AT91_IO_PHYS_BASE	0xFFF78000
-#define AT91_IO_VIRT_BASE	(0xFF000000 - AT91_IO_SIZE)
-#else
-/*
- * Identity mapping for the non MMU case.
- */
-#define AT91_IO_PHYS_BASE	AT91_BASE_SYS
-#define AT91_IO_VIRT_BASE	AT91_IO_PHYS_BASE
-#endif
-
-#define AT91_IO_SIZE		(0xFFFFFFFF - AT91_IO_PHYS_BASE + 1)
-
- /* Convert a physical IO address to virtual IO address */
-#define AT91_IO_P2V(x)		((x) - AT91_IO_PHYS_BASE + AT91_IO_VIRT_BASE)
-
-/*
- * Virtual to Physical Address mapping for IO devices.
- */
-#define AT91_VA_BASE_SYS	AT91_IO_P2V(AT91_BASE_SYS)
-#define AT91_VA_BASE_EMAC	AT91_IO_P2V(AT91RM9200_BASE_EMAC)
-
- /* Internal SRAM is mapped below the IO devices */
-#define AT91_SRAM_MAX		SZ_1M
-#define AT91_VIRT_BASE		(AT91_IO_VIRT_BASE - AT91_SRAM_MAX)
-
-/* Serial ports */
-#define ATMEL_MAX_UART		7		/* 6 USART3's and one DBGU port (SAM9260) */
-
-/* External Memory Map */
-#define AT91_CHIPSELECT_0	0x10000000
-#define AT91_CHIPSELECT_1	0x20000000
-#define AT91_CHIPSELECT_2	0x30000000
-#define AT91_CHIPSELECT_3	0x40000000
-#define AT91_CHIPSELECT_4	0x50000000
-#define AT91_CHIPSELECT_5	0x60000000
-#define AT91_CHIPSELECT_6	0x70000000
-#define AT91_CHIPSELECT_7	0x80000000
-
-/* SDRAM */
-#ifdef CONFIG_DRAM_BASE
-#define AT91_SDRAM_BASE		CONFIG_DRAM_BASE
-#else
-#define AT91_SDRAM_BASE		AT91_CHIPSELECT_1
-#endif
-
-/* Clocks */
-#define AT91_SLOW_CLOCK		32768		/* slow clock */
-
-
-#endif
diff --git a/include/asm-arm/arch-at91/io.h b/include/asm-arm/arch-at91/io.h
deleted file mode 100644
index f8beaa228467..000000000000
--- a/include/asm-arm/arch-at91/io.h
+++ /dev/null
@@ -1,48 +0,0 @@
-/*
- * include/asm-arm/arch-at91/io.h
- *
- *  Copyright (C) 2003 SAN People
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#ifndef __ASM_ARCH_IO_H
-#define __ASM_ARCH_IO_H
-
-#define IO_SPACE_LIMIT		0xFFFFFFFF
-
-#define __io(a)			((void __iomem *)(a))
-#define __mem_pci(a)		(a)
-
-
-#ifndef __ASSEMBLY__
-
-static inline unsigned int at91_sys_read(unsigned int reg_offset)
-{
-	void __iomem *addr = (void __iomem *)AT91_VA_BASE_SYS;
-
-	return __raw_readl(addr + reg_offset);
-}
-
-static inline void at91_sys_write(unsigned int reg_offset, unsigned long value)
-{
-	void __iomem *addr = (void __iomem *)AT91_VA_BASE_SYS;
-
-	__raw_writel(value, addr + reg_offset);
-}
-
-#endif
-
-#endif
diff --git a/include/asm-arm/arch-at91/irqs.h b/include/asm-arm/arch-at91/irqs.h
deleted file mode 100644
index 70b1216dce5d..000000000000
--- a/include/asm-arm/arch-at91/irqs.h
+++ /dev/null
@@ -1,48 +0,0 @@
-/*
- * include/asm-arm/arch-at91/irqs.h
- *
- *  Copyright (C) 2004 SAN People
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#ifndef __ASM_ARCH_IRQS_H
-#define __ASM_ARCH_IRQS_H
-
-#include <asm/io.h>
-#include <asm/arch/at91_aic.h>
-
-#define NR_AIC_IRQS 32
-
-
-/*
- * Acknowledge interrupt with AIC after interrupt has been handled.
- *   (by kernel/irq.c)
- */
-#define irq_finish(irq) do { at91_sys_write(AT91_AIC_EOICR, 0); } while (0)
-
-
-/*
- * IRQ interrupt symbols are the AT91xxx_ID_* symbols
- * for IRQs handled directly through the AIC, or else the AT91_PIN_*
- * symbols in gpio.h for ones handled indirectly as GPIOs.
- * We make provision for 5 banks of GPIO.
- */
-#define	NR_IRQS		(NR_AIC_IRQS + (5 * 32))
-
-/* FIQ is AIC source 0. */
-#define FIQ_START AT91_ID_FIQ
-
-#endif
diff --git a/include/asm-arm/arch-at91/memory.h b/include/asm-arm/arch-at91/memory.h
deleted file mode 100644
index 4835d6784509..000000000000
--- a/include/asm-arm/arch-at91/memory.h
+++ /dev/null
@@ -1,39 +0,0 @@
-/*
- * include/asm-arm/arch-at91/memory.h
- *
- *  Copyright (C) 2004 SAN People
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#ifndef __ASM_ARCH_MEMORY_H
-#define __ASM_ARCH_MEMORY_H
-
-#include <asm/hardware.h>
-
-#define PHYS_OFFSET	(AT91_SDRAM_BASE)
-
-
-/*
- * Virtual view <-> DMA view memory address translations
- * virt_to_bus: Used to translate the virtual address to an
- *              address suitable to be passed to set_dma_addr
- * bus_to_virt: Used to convert an address for DMA operations
- *              to an address that the kernel can use.
- */
-#define __virt_to_bus(x) __virt_to_phys(x)
-#define __bus_to_virt(x) __phys_to_virt(x)
-
-#endif
diff --git a/include/asm-arm/arch-at91/system.h b/include/asm-arm/arch-at91/system.h
deleted file mode 100644
index 6bf846098ea9..000000000000
--- a/include/asm-arm/arch-at91/system.h
+++ /dev/null
@@ -1,53 +0,0 @@
-/*
- * include/asm-arm/arch-at91/system.h
- *
- *  Copyright (C) 2003 SAN People
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#ifndef __ASM_ARCH_SYSTEM_H
-#define __ASM_ARCH_SYSTEM_H
-
-#include <asm/hardware.h>
-#include <asm/arch/at91_st.h>
-#include <asm/arch/at91_dbgu.h>
-
-static inline void arch_idle(void)
-{
-	/*
-	 * Disable the processor clock.  The processor will be automatically
-	 * re-enabled by an interrupt or by a reset.
-	 */
-//	at91_sys_write(AT91_PMC_SCDR, AT91_PMC_PCK);
-
-	/*
-	 * Set the processor (CP15) into 'Wait for Interrupt' mode.
-	 * Unlike disabling the processor clock via the PMC (above)
-	 *  this allows the processor to be woken via JTAG.
-	 */
-	cpu_do_idle();
-}
-
-void (*at91_arch_reset)(void);
-
-static inline void arch_reset(char mode)
-{
-	/* call the CPU-specific reset function */
-	if (at91_arch_reset)
-		(at91_arch_reset)();
-}
-
-#endif
diff --git a/include/asm-arm/arch-at91/timex.h b/include/asm-arm/arch-at91/timex.h
deleted file mode 100644
index 298d8313cdac..000000000000
--- a/include/asm-arm/arch-at91/timex.h
+++ /dev/null
@@ -1,77 +0,0 @@
-/*
- * include/asm-arm/arch-at91/timex.h
- *
- *  Copyright (C) 2003 SAN People
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#ifndef __ASM_ARCH_TIMEX_H
-#define __ASM_ARCH_TIMEX_H
-
-#include <asm/hardware.h>
-
-#if defined(CONFIG_ARCH_AT91RM9200)
-
-#define CLOCK_TICK_RATE		(AT91_SLOW_CLOCK)
-
-#elif defined(CONFIG_ARCH_AT91SAM9260)
-
-#if defined(CONFIG_MACH_USB_A9260) || defined(CONFIG_MACH_QIL_A9260)
-#define AT91SAM9_MASTER_CLOCK	90000000
-#else
-#define AT91SAM9_MASTER_CLOCK	99300000
-#endif
-
-#define CLOCK_TICK_RATE		(AT91SAM9_MASTER_CLOCK/16)
-
-#elif defined(CONFIG_ARCH_AT91SAM9261)
-
-#define AT91SAM9_MASTER_CLOCK	99300000
-#define CLOCK_TICK_RATE		(AT91SAM9_MASTER_CLOCK/16)
-
-#elif defined(CONFIG_ARCH_AT91SAM9263)
-
-#if defined(CONFIG_MACH_USB_A9263)
-#define AT91SAM9_MASTER_CLOCK	90000000
-#else
-#define AT91SAM9_MASTER_CLOCK	99959500
-#endif
-
-#define CLOCK_TICK_RATE		(AT91SAM9_MASTER_CLOCK/16)
-
-#elif defined(CONFIG_ARCH_AT91SAM9RL)
-
-#define AT91SAM9_MASTER_CLOCK	100000000
-#define CLOCK_TICK_RATE		(AT91SAM9_MASTER_CLOCK/16)
-
-#elif defined(CONFIG_ARCH_AT91SAM9G20)
-
-#define AT91SAM9_MASTER_CLOCK	132096000
-#define CLOCK_TICK_RATE		(AT91SAM9_MASTER_CLOCK/16)
-
-#elif defined(CONFIG_ARCH_AT91CAP9)
-
-#define AT91CAP9_MASTER_CLOCK	100000000
-#define CLOCK_TICK_RATE		(AT91CAP9_MASTER_CLOCK/16)
-
-#elif defined(CONFIG_ARCH_AT91X40)
-
-#define AT91X40_MASTER_CLOCK	40000000
-#define CLOCK_TICK_RATE		(AT91X40_MASTER_CLOCK)
-
-#endif
-
-#endif
diff --git a/include/asm-arm/arch-at91/uncompress.h b/include/asm-arm/arch-at91/uncompress.h
deleted file mode 100644
index f5636a8f6132..000000000000
--- a/include/asm-arm/arch-at91/uncompress.h
+++ /dev/null
@@ -1,76 +0,0 @@
-/*
- * include/asm-arm/arch-at91/uncompress.h
- *
- *  Copyright (C) 2003 SAN People
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#ifndef __ASM_ARCH_UNCOMPRESS_H
-#define __ASM_ARCH_UNCOMPRESS_H
-
-#include <asm/io.h>
-#include <linux/atmel_serial.h>
-
-#if defined(CONFIG_AT91_EARLY_DBGU)
-#define UART_OFFSET (AT91_DBGU + AT91_BASE_SYS)
-#elif defined(CONFIG_AT91_EARLY_USART0)
-#define UART_OFFSET AT91_USART0
-#elif defined(CONFIG_AT91_EARLY_USART1)
-#define UART_OFFSET AT91_USART1
-#elif defined(CONFIG_AT91_EARLY_USART2)
-#define UART_OFFSET AT91_USART2
-#elif defined(CONFIG_AT91_EARLY_USART3)
-#define UART_OFFSET AT91_USART3
-#elif defined(CONFIG_AT91_EARLY_USART4)
-#define UART_OFFSET AT91_USART4
-#elif defined(CONFIG_AT91_EARLY_USART5)
-#define UART_OFFSET AT91_USART5
-#endif
-
-/*
- * The following code assumes the serial port has already been
- * initialized by the bootloader.  If you didn't setup a port in
- * your bootloader then nothing will appear (which might be desired).
- *
- * This does not append a newline
- */
-static void putc(int c)
-{
-#ifdef UART_OFFSET
-	void __iomem *sys = (void __iomem *) UART_OFFSET;	/* physical address */
-
-	while (!(__raw_readl(sys + ATMEL_US_CSR) & ATMEL_US_TXRDY))
-		barrier();
-	__raw_writel(c, sys + ATMEL_US_THR);
-#endif
-}
-
-static inline void flush(void)
-{
-#ifdef UART_OFFSET
-	void __iomem *sys = (void __iomem *) UART_OFFSET;	/* physical address */
-
-	/* wait for transmission to complete */
-	while (!(__raw_readl(sys + ATMEL_US_CSR) & ATMEL_US_TXEMPTY))
-		barrier();
-#endif
-}
-
-#define arch_decomp_setup()
-
-#define arch_decomp_wdog()
-
-#endif
diff --git a/include/asm-arm/arch-at91/vmalloc.h b/include/asm-arm/arch-at91/vmalloc.h
deleted file mode 100644
index bb05e70e932a..000000000000
--- a/include/asm-arm/arch-at91/vmalloc.h
+++ /dev/null
@@ -1,26 +0,0 @@
-/*
- * include/asm-arm/arch-at91/vmalloc.h
- *
- *  Copyright (C) 2003 SAN People
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#ifndef __ASM_ARCH_VMALLOC_H
-#define __ASM_ARCH_VMALLOC_H
-
-#define VMALLOC_END		(AT91_VIRT_BASE & PGDIR_MASK)
-
-#endif
diff --git a/include/asm-arm/arch-cl7500/debug-macro.S b/include/asm-arm/arch-cl7500/debug-macro.S
deleted file mode 100644
index 9a2b67d24098..000000000000
--- a/include/asm-arm/arch-cl7500/debug-macro.S
+++ /dev/null
@@ -1,21 +0,0 @@
-/* linux/include/asm-arm/arch-cl7500/debug-macro.S
- *
- * Debugging macro include header
- *
- *  Copyright (C) 1994-1999 Russell King
- *  Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
-*/
-
-		.macro	addruart,rx
-		mov	\rx, #0xe0000000
-		orr	\rx, \rx, #0x00010000
-		orr	\rx, \rx, #0x00000be0
-		.endm
-
-#define UART_SHIFT	2
-#include <asm/hardware/debug-8250.S>
diff --git a/include/asm-arm/arch-cl7500/dma.h b/include/asm-arm/arch-cl7500/dma.h
deleted file mode 100644
index 591ed2551892..000000000000
--- a/include/asm-arm/arch-cl7500/dma.h
+++ /dev/null
@@ -1,21 +0,0 @@
-/*
- * linux/include/asm-arm/arch-cl7500/dma.h
- *
- * Copyright (C) 1999 Nexus Electronics Ltd.
- */
-
-#ifndef __ASM_ARCH_DMA_H
-#define __ASM_ARCH_DMA_H
-
-/* DMA is not yet implemented! It should be the same as acorn, copy over.. */
-
-/*
- * This is the maximum DMA address that can be DMAd to.
- * There should not be more than (0xd0000000 - 0xc0000000)
- * bytes of RAM.
- */
-#define MAX_DMA_ADDRESS		0xd0000000
-
-#define DMA_S0			0
-
-#endif /* _ASM_ARCH_DMA_H */
diff --git a/include/asm-arm/arch-cl7500/entry-macro.S b/include/asm-arm/arch-cl7500/entry-macro.S
deleted file mode 100644
index 038b761fdadc..000000000000
--- a/include/asm-arm/arch-cl7500/entry-macro.S
+++ /dev/null
@@ -1,16 +0,0 @@
-#include <asm/hardware.h>
-#include <asm/hardware/entry-macro-iomd.S>
-
-	.equ	ioc_base_high, IOC_BASE & 0xff000000
-	.equ	ioc_base_low, IOC_BASE & 0x00ff0000
-
-	.macro  get_irqnr_preamble, base, tmp
-	mov	\base, #ioc_base_high		@ point at IOC
-	.if	ioc_base_low
-	orr	\base, \base, #ioc_base_low
-	.endif
-	.endm
-
-	.macro  arch_ret_to_user, tmp1, tmp2
-	.endm
-
diff --git a/include/asm-arm/arch-cl7500/hardware.h b/include/asm-arm/arch-cl7500/hardware.h
deleted file mode 100644
index 1adfd18e6154..000000000000
--- a/include/asm-arm/arch-cl7500/hardware.h
+++ /dev/null
@@ -1,67 +0,0 @@
-/*
- * linux/include/asm-arm/arch-cl7500/hardware.h
- *
- * Copyright (C) 1996-1999 Russell King.
- * Copyright (C) 1999 Nexus Electronics Ltd.
- *
- * This file contains the hardware definitions of the 
- * CL7500 evaluation board.
- */
-#ifndef __ASM_ARCH_HARDWARE_H
-#define __ASM_ARCH_HARDWARE_H
-
-#include <asm/arch/memory.h>
-#include <asm/hardware/iomd.h>
-
-#ifdef __ASSEMBLY__
-#define IOMEM(x) x
-#else
-#define IOMEM(x) ((void __iomem *)(x))
-#endif
-
-/*
- * What hardware must be present
- */
-#define HAS_IOMD
-#define HAS_VIDC20
-
-/* Hardware addresses of major areas.
- *  *_START is the physical address
- *  *_SIZE  is the size of the region
- *  *_BASE  is the virtual address
- */
-
-#define IO_START		0x03000000	/* I/O */
-#define IO_SIZE			0x01000000
-#define IO_BASE			IOMEM(0xe0000000)
-
-#define ISA_START		0x0c000000	/* ISA */
-#define ISA_SIZE		0x00010000
-#define ISA_BASE		0xe1000000
-
-#define FLASH_START		0x01000000	/* XXX */
-#define FLASH_SIZE		0x01000000
-#define FLASH_BASE		0xe2000000
-
-#define LED_START		0x0302B000
-#define LED_SIZE		0x00001000
-#define LED_BASE		0xe3000000
-#define LED_ADDRESS		(LED_BASE + 0xa00)
-
-/* Let's define SCREEN_START for CL7500, even though it's a lie. */
-#define SCREEN_START		0x02000000	/* VRAM */
-#define SCREEN_END		0xdfc00000
-#define SCREEN_BASE		0xdf800000
-
-#define VIDC_BASE		(void __iomem *)0xe0400000
-#define IOMD_BASE		IOMEM(0xe0200000)
-#define IOC_BASE		IOMEM(0xe0200000)
-#define FLOPPYDMA_BASE		IOMEM(0xe002a000)
-#define PCIO_BASE		IOMEM(0xe0010000)
-
-#define vidc_writel(val)	__raw_writel(val, VIDC_BASE)
-
-/* in/out bias for the ISA slot region */
-#define ISASLOT_IO		0x80400000
-
-#endif
diff --git a/include/asm-arm/arch-cl7500/io.h b/include/asm-arm/arch-cl7500/io.h
deleted file mode 100644
index 89a33287f4fe..000000000000
--- a/include/asm-arm/arch-cl7500/io.h
+++ /dev/null
@@ -1,255 +0,0 @@
-/*
- * linux/include/asm-arm/arch-cl7500/io.h
- *  from linux/include/asm-arm/arch-rpc/io.h
- *
- * Copyright (C) 1997 Russell King
- *
- * Modifications:
- *  06-Dec-1997	RMK	Created.
- */
-#ifndef __ASM_ARM_ARCH_IO_H
-#define __ASM_ARM_ARCH_IO_H
-
-#include <asm/hardware.h>
-
-#define IO_SPACE_LIMIT 0xffffffff
-
-/*
- * GCC is totally crap at loading/storing data.  We try to persuade it
- * to do the right thing by using these whereever possible instead of
- * the above.
- */
-#define __arch_base_getb(b,o)			\
- ({						\
-	unsigned int v, r = (b);		\
-	__asm__ __volatile__(			\
-		"ldrb	%0, [%1, %2]"		\
-		: "=r" (v)			\
-		: "r" (r), "Ir" (o));		\
-	v;					\
- })
-
-#define __arch_base_getl(b,o)			\
- ({						\
-	unsigned int v, r = (b);		\
-	__asm__ __volatile__(			\
-		"ldr	%0, [%1, %2]"		\
-		: "=r" (v)			\
-		: "r" (r), "Ir" (o));		\
-	v;					\
- })
-
-#define __arch_base_putb(v,b,o)			\
- ({						\
-	unsigned int r = (b);			\
-	__asm__ __volatile__(			\
-		"strb	%0, [%1, %2]"		\
-		:				\
-		: "r" (v), "r" (r), "Ir" (o));	\
- })
-
-#define __arch_base_putl(v,b,o)			\
- ({						\
-	unsigned int r = (b);			\
-	__asm__ __volatile__(			\
-		"str	%0, [%1, %2]"		\
-		:				\
-		: "r" (v), "r" (r), "Ir" (o));	\
- })
-
-/*
- * We use two different types of addressing - PC style addresses, and ARM
- * addresses.  PC style accesses the PC hardware with the normal PC IO
- * addresses, eg 0x3f8 for serial#1.  ARM addresses are 0x80000000+
- * and are translated to the start of IO.  Note that all addresses are
- * shifted left!
- */
-#define __PORT_PCIO(x)	(!((x) & 0x80000000))
-
-/*
- * Dynamic IO functions - let the compiler
- * optimize the expressions
- */
-static inline void __outb (unsigned int value, unsigned int port)
-{
-	unsigned long temp;
-	__asm__ __volatile__(
-	"tst	%2, #0x80000000\n\t"
-	"mov	%0, %4\n\t"
-	"addeq	%0, %0, %3\n\t"
-	"strb	%1, [%0, %2, lsl #2]	@ outb"
-	: "=&r" (temp)
-	: "r" (value), "r" (port), "Ir" (PCIO_BASE - IO_BASE), "Ir" (IO_BASE)
-	: "cc");
-}
-
-static inline void __outw (unsigned int value, unsigned int port)
-{
-	unsigned long temp;
-	__asm__ __volatile__(
-	"tst	%2, #0x80000000\n\t"
-	"mov	%0, %4\n\t"
-	"addeq	%0, %0, %3\n\t"
-	"str	%1, [%0, %2, lsl #2]	@ outw"
-	: "=&r" (temp)
-	: "r" (value|value<<16), "r" (port), "Ir" (PCIO_BASE - IO_BASE), "Ir" (IO_BASE)
-	: "cc");
-}
-
-static inline void __outl (unsigned int value, unsigned int port)
-{
-	unsigned long temp;
-	__asm__ __volatile__(
-	"tst	%2, #0x80000000\n\t"
-	"mov	%0, %4\n\t"
-	"addeq	%0, %0, %3\n\t"
-	"str	%1, [%0, %2, lsl #2]	@ outl"
-	: "=&r" (temp)
-	: "r" (value), "r" (port), "Ir" (PCIO_BASE - IO_BASE), "Ir" (IO_BASE)
-	: "cc");
-}
-
-#define DECLARE_DYN_IN(sz,fnsuffix,instr)					\
-static inline unsigned sz __in##fnsuffix (unsigned int port)		\
-{										\
-	unsigned long temp, value;						\
-	__asm__ __volatile__(							\
-	"tst	%2, #0x80000000\n\t"						\
-	"mov	%0, %4\n\t"							\
-	"addeq	%0, %0, %3\n\t"							\
-	"ldr" instr "	%1, [%0, %2, lsl #2]	@ in" #fnsuffix			\
-	: "=&r" (temp), "=r" (value)						\
-	: "r" (port), "Ir" (PCIO_BASE - IO_BASE), "Ir" (IO_BASE)		\
-	: "cc");								\
-	return (unsigned sz)value;						\
-}
-
-static inline unsigned int __ioaddr (unsigned int port)			\
-{										\
-	if (__PORT_PCIO(port))							\
-		return (unsigned int)(PCIO_BASE + (port << 2));			\
-	else									\
-		return (unsigned int)(IO_BASE + (port << 2));			\
-}
-
-#define DECLARE_IO(sz,fnsuffix,instr)	\
-	DECLARE_DYN_IN(sz,fnsuffix,instr)
-
-DECLARE_IO(char,b,"b")
-DECLARE_IO(short,w,"")
-DECLARE_IO(int,l,"")
-
-#undef DECLARE_IO
-#undef DECLARE_DYN_IN
-
-/*
- * Constant address IO functions
- *
- * These have to be macros for the 'J' constraint to work -
- * +/-4096 immediate operand.
- */
-#define __outbc(value,port)							\
-({										\
-	if (__PORT_PCIO((port)))						\
-		__asm__ __volatile__(						\
-		"strb	%0, [%1, %2]	@ outbc"				\
-		: : "r" (value), "r" (PCIO_BASE), "Jr" ((port) << 2));		\
-	else									\
-		__asm__ __volatile__(						\
-		"strb	%0, [%1, %2]	@ outbc"				\
-		: : "r" (value), "r" (IO_BASE), "r" ((port) << 2));		\
-})
-
-#define __inbc(port)								\
-({										\
-	unsigned char result;							\
-	if (__PORT_PCIO((port)))						\
-		__asm__ __volatile__(						\
-		"ldrb	%0, [%1, %2]	@ inbc"					\
-		: "=r" (result) : "r" (PCIO_BASE), "Jr" ((port) << 2));		\
-	else									\
-		__asm__ __volatile__(						\
-		"ldrb	%0, [%1, %2]	@ inbc"					\
-		: "=r" (result) : "r" (IO_BASE), "r" ((port) << 2));		\
-	result;									\
-})
-
-#define __outwc(value,port)							\
-({										\
-	unsigned long v = value;						\
-	if (__PORT_PCIO((port)))						\
-		__asm__ __volatile__(						\
-		"str	%0, [%1, %2]	@ outwc"				\
-		: : "r" (v|v<<16), "r" (PCIO_BASE), "Jr" ((port) << 2));	\
-	else									\
-		__asm__ __volatile__(						\
-		"str	%0, [%1, %2]	@ outwc"				\
-		: : "r" (v|v<<16), "r" (IO_BASE), "r" ((port) << 2));		\
-})
-
-#define __inwc(port)								\
-({										\
-	unsigned short result;							\
-	if (__PORT_PCIO((port)))						\
-		__asm__ __volatile__(						\
-		"ldr	%0, [%1, %2]	@ inwc"					\
-		: "=r" (result) : "r" (PCIO_BASE), "Jr" ((port) << 2));		\
-	else									\
-		__asm__ __volatile__(						\
-		"ldr	%0, [%1, %2]	@ inwc"					\
-		: "=r" (result) : "r" (IO_BASE), "r" ((port) << 2));		\
-	result & 0xffff;							\
-})
-
-#define __outlc(value,port)							\
-({										\
-	unsigned long v = value;						\
-	if (__PORT_PCIO((port)))						\
-		__asm__ __volatile__(						\
-		"str	%0, [%1, %2]	@ outlc"				\
-		: : "r" (v), "r" (PCIO_BASE), "Jr" ((port) << 2));		\
-	else									\
-		__asm__ __volatile__(						\
-		"str	%0, [%1, %2]	@ outlc"				\
-		: : "r" (v), "r" (IO_BASE), "r" ((port) << 2));			\
-})
-
-#define __inlc(port)								\
-({										\
-	unsigned long result;							\
-	if (__PORT_PCIO((port)))						\
-		__asm__ __volatile__(						\
-		"ldr	%0, [%1, %2]	@ inlc"					\
-		: "=r" (result) : "r" (PCIO_BASE), "Jr" ((port) << 2));		\
-	else									\
-		__asm__ __volatile__(						\
-		"ldr	%0, [%1, %2]	@ inlc"					\
-		: "=r" (result) : "r" (IO_BASE), "r" ((port) << 2));		\
-	result;									\
-})
-
-#define __ioaddrc(port)								\
-	(__PORT_PCIO((port)) ? PCIO_BASE + ((port) << 2) : IO_BASE + ((port) << 2))
-
-#define inb(p)	 	(__builtin_constant_p((p)) ? __inbc(p)    : __inb(p))
-#define inw(p)	 	(__builtin_constant_p((p)) ? __inwc(p)    : __inw(p))
-#define inl(p)	 	(__builtin_constant_p((p)) ? __inlc(p)    : __inl(p))
-#define outb(v,p)	(__builtin_constant_p((p)) ? __outbc(v,p) : __outb(v,p))
-#define outw(v,p)	(__builtin_constant_p((p)) ? __outwc(v,p) : __outw(v,p))
-#define outl(v,p)	(__builtin_constant_p((p)) ? __outlc(v,p) : __outl(v,p))
-#define __ioaddr(p)	(__builtin_constant_p((p)) ? __ioaddr(p)  : __ioaddrc(p))
-/* the following macro is deprecated */
-#define ioaddr(port)			__ioaddr((port))
-
-#define insb(p,d,l)	__raw_readsb(__ioaddr(p),d,l)
-#define insw(p,d,l)	__raw_readsw(__ioaddr(p),d,l)
-
-#define outsb(p,d,l)	__raw_writesb(__ioaddr(p),d,l)
-#define outsw(p,d,l)	__raw_writesw(__ioaddr(p),d,l)
-
-/*
- * 1:1 mapping for ioremapped regions.
- */
-#define __mem_pci(x)	(x)
-
-#endif
diff --git a/include/asm-arm/arch-cl7500/irq.h b/include/asm-arm/arch-cl7500/irq.h
deleted file mode 100644
index 4b286331f3f8..000000000000
--- a/include/asm-arm/arch-cl7500/irq.h
+++ /dev/null
@@ -1,32 +0,0 @@
-/*
- * include/asm-arm/arch-cl7500/irq.h
- *
- * Copyright (C) 1996 Russell King
- * Copyright (C) 1999, 2001 Nexus Electronics Ltd.
- *
- * Changelog:
- *   10-10-1996	RMK	Brought up to date with arch-sa110eval
- *   22-08-1998	RMK	Restructured IRQ routines
- *   11-08-1999	PJB	Created ARM7500 version, derived from RiscPC code
- */
-
-#include <asm/hardware/iomd.h>
-#include <asm/io.h>
-
-static inline int fixup_irq(unsigned int irq)
-{
-	if (irq == IRQ_ISA) {
-		int isabits = *((volatile unsigned int *)0xe002b700);
-		if (isabits == 0) {
-			printk("Spurious ISA IRQ!\n");
-			return irq;
-		}
-		irq = IRQ_ISA_BASE;
-		while (!(isabits & 1)) {
-			irq++;
-			isabits >>= 1;
-		}
-	}
-
-	return irq;
-}
diff --git a/include/asm-arm/arch-cl7500/irqs.h b/include/asm-arm/arch-cl7500/irqs.h
deleted file mode 100644
index f20996eadf19..000000000000
--- a/include/asm-arm/arch-cl7500/irqs.h
+++ /dev/null
@@ -1,66 +0,0 @@
-/*
- * linux/include/asm-arm/arch-cl7500/irqs.h
- *
- * Copyright (C) 1999 Nexus Electronics Ltd
- */
-
-#define IRQ_INT2		0
-#define IRQ_INT1		2
-#define IRQ_VSYNCPULSE		3
-#define IRQ_POWERON		4
-#define IRQ_TIMER0		5
-#define IRQ_TIMER1		6
-#define IRQ_FORCE		7
-#define IRQ_INT8		8
-#define IRQ_ISA			9
-#define IRQ_INT6		10
-#define IRQ_INT5		11
-#define IRQ_INT4		12
-#define IRQ_INT3		13
-#define IRQ_KEYBOARDTX		14
-#define IRQ_KEYBOARDRX		15
-
-#define IRQ_DMA0		16
-#define IRQ_DMA1		17
-#define IRQ_DMA2		18
-#define IRQ_DMA3		19
-#define IRQ_DMAS0		20
-#define IRQ_DMAS1		21
-
-#define IRQ_IOP0		24
-#define IRQ_IOP1		25
-#define IRQ_IOP2		26
-#define IRQ_IOP3		27
-#define IRQ_IOP4		28
-#define IRQ_IOP5		29
-#define IRQ_IOP6		30
-#define IRQ_IOP7		31
-
-#define IRQ_MOUSERX		40
-#define IRQ_MOUSETX		41
-#define IRQ_ADC			42
-#define IRQ_EVENT1		43
-#define IRQ_EVENT2		44
-
-#define IRQ_ISA_BASE		48
-#define IRQ_ISA_3		48
-#define IRQ_ISA_4		49
-#define IRQ_ISA_5		50
-#define IRQ_ISA_7		51
-#define IRQ_ISA_9		52
-#define IRQ_ISA_10		53
-#define IRQ_ISA_11		54
-#define IRQ_ISA_14		55	
-
-#define FIQ_INT9		0
-#define FIQ_INT5		1
-#define FIQ_INT6		4
-#define FIQ_INT8		6
-#define FIQ_FORCE		7
-
-/*
- * This is the offset of the FIQ "IRQ" numbers
- */
-#define FIQ_START		64
-
-#define IRQ_TIMER		IRQ_TIMER0
diff --git a/include/asm-arm/arch-cl7500/memory.h b/include/asm-arm/arch-cl7500/memory.h
deleted file mode 100644
index 3178140e24ca..000000000000
--- a/include/asm-arm/arch-cl7500/memory.h
+++ /dev/null
@@ -1,35 +0,0 @@
-/*
- * linux/include/asm-arm/arch-cl7500/memory.h
- *
- * Copyright (c) 1996,1997,1998 Russell King.
- *
- * Changelog:
- *  20-Oct-1996	RMK	Created
- *  31-Dec-1997	RMK	Fixed definitions to reduce warnings
- *  11-Jan-1998	RMK	Uninlined to reduce hits on cache
- *  08-Feb-1998	RMK	Added __virt_to_bus and __bus_to_virt
- *  21-Mar-1999	RMK	Renamed to memory.h
- *		RMK	Added TASK_SIZE and PAGE_OFFSET
- */
-#ifndef __ASM_ARCH_MEMORY_H
-#define __ASM_ARCH_MEMORY_H
-
-/*
- * Physical DRAM offset.
- */
-#define PHYS_OFFSET	UL(0x10000000)
-
-/*
- * These are exactly the same on the RiscPC as the
- * physical memory view.
- */
-#define __virt_to_bus(x) __virt_to_phys(x)
-#define __bus_to_virt(x) __phys_to_virt(x)
-
-/*
- * Cache flushing area - ROM
- */
-#define FLUSH_BASE_PHYS		0x00000000
-#define FLUSH_BASE		0xdf000000
-
-#endif
diff --git a/include/asm-arm/arch-cl7500/system.h b/include/asm-arm/arch-cl7500/system.h
deleted file mode 100644
index a9505d6a74d7..000000000000
--- a/include/asm-arm/arch-cl7500/system.h
+++ /dev/null
@@ -1,23 +0,0 @@
-/*
- * linux/include/asm-arm/arch-cl7500/system.h
- *
- * Copyright (c) 1999 Nexus Electronics Ltd.
- */
-#ifndef __ASM_ARCH_SYSTEM_H
-#define __ASM_ARCH_SYSTEM_H
-
-#include <asm/hardware/iomd.h>
-#include <asm/io.h>
-
-static inline void arch_idle(void)
-{
-	iomd_writeb(0, IOMD_SUSMODE);
-}
-
-#define arch_reset(mode)			\
-	do {					\
-		iomd_writeb(0, IOMD_ROMCR0);	\
-		cpu_reset(0);			\
-	} while (0)
-
-#endif
diff --git a/include/asm-arm/arch-cl7500/timex.h b/include/asm-arm/arch-cl7500/timex.h
deleted file mode 100644
index 8a4175fc0106..000000000000
--- a/include/asm-arm/arch-cl7500/timex.h
+++ /dev/null
@@ -1,13 +0,0 @@
-/*
- * linux/include/asm-arm/arch-cl7500/timex.h
- *
- * CL7500 architecture timex specifications
- *
- * Copyright (C) 1999 Nexus Electronics Ltd
- */
-
-/*
- * On the ARM7500, the clock ticks at 2MHz.
- */
-#define CLOCK_TICK_RATE		2000000
-
diff --git a/include/asm-arm/arch-cl7500/uncompress.h b/include/asm-arm/arch-cl7500/uncompress.h
deleted file mode 100644
index c437e0c88c3f..000000000000
--- a/include/asm-arm/arch-cl7500/uncompress.h
+++ /dev/null
@@ -1,35 +0,0 @@
-/*
- * linux/include/asm-arm/arch-cl7500/uncompress.h
- *
- * Copyright (C) 1999, 2000 Nexus Electronics Ltd.
- */
-#define BASE 0x03010000
-#define SERBASE (BASE + (0x2f8 << 2))
-
-static inline void putc(char c)
-{
-	while (!(*((volatile unsigned int *)(SERBASE + 0x14)) & 0x20))
-		barrier();
-
-	*((volatile unsigned int *)(SERBASE)) = c;
-}
-
-static inline void flush(void)
-{
-}
-
-static __inline__ void arch_decomp_setup(void)
-{
-	int baud = 3686400 / (9600 * 32);
-
-	*((volatile unsigned int *)(SERBASE + 0xC)) = 0x80;
-	*((volatile unsigned int *)(SERBASE + 0x0)) = baud & 0xff;
-	*((volatile unsigned int *)(SERBASE + 0x4)) = (baud & 0xff00) >> 8;
-	*((volatile unsigned int *)(SERBASE + 0xC)) = 3; /* 8 bits */
-	*((volatile unsigned int *)(SERBASE + 0x10)) = 3; /* DTR, RTS */
-}
-
-/*
- * nothing to do
- */
-#define arch_decomp_wdog()
diff --git a/include/asm-arm/arch-cl7500/vmalloc.h b/include/asm-arm/arch-cl7500/vmalloc.h
deleted file mode 100644
index ba8d7a84456a..000000000000
--- a/include/asm-arm/arch-cl7500/vmalloc.h
+++ /dev/null
@@ -1,4 +0,0 @@
-/*
- * linux/include/asm-arm/arch-cl7500/vmalloc.h
- */
-#define VMALLOC_END       (PAGE_OFFSET + 0x1c000000)
diff --git a/include/asm-arm/arch-clps711x/debug-macro.S b/include/asm-arm/arch-clps711x/debug-macro.S
deleted file mode 100644
index bc0a5760722b..000000000000
--- a/include/asm-arm/arch-clps711x/debug-macro.S
+++ /dev/null
@@ -1,46 +0,0 @@
-/* linux/include/asm-arm/arch-clps711x/debug-macro.S
- *
- * Debugging macro include header
- *
- *  Copyright (C) 1994-1999 Russell King
- *  Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
-*/
-
-#include <asm/hardware/clps7111.h>
-
-		.macro	addruart,rx
-		mrc	p15, 0, \rx, c1, c0
-		tst	\rx, #1			@ MMU enabled?
-		moveq	\rx, #CLPS7111_PHYS_BASE
-		movne	\rx, #CLPS7111_VIRT_BASE
-#ifndef CONFIG_DEBUG_CLPS711X_UART2
-		add	\rx, \rx, #0x0000	@ UART1
-#else
-		add	\rx, \rx, #0x1000	@ UART2
-#endif
-		.endm
-
-		.macro	senduart,rd,rx
-		str	\rd, [\rx, #0x0480]	@ UARTDR
-		.endm
-
-		.macro	waituart,rd,rx
-1001:		ldr	\rd, [\rx, #0x0140]	@ SYSFLGx
-		tst	\rd, #1 << 11		@ UBUSYx
-		bne	1001b
-		.endm
-
-		.macro	busyuart,rd,rx
-		tst	\rx, #0x1000		@ UART2 does not have CTS here
-		bne	1002f
-1001:		ldr	\rd, [\rx, #0x0140]	@ SYSFLGx
-		tst	\rd, #1 << 8		@ CTS
-		bne	1001b
-1002:
-		.endm
-
diff --git a/include/asm-arm/arch-clps711x/dma.h b/include/asm-arm/arch-clps711x/dma.h
deleted file mode 100644
index 610997938423..000000000000
--- a/include/asm-arm/arch-clps711x/dma.h
+++ /dev/null
@@ -1,19 +0,0 @@
-/*
- *  linux/include/asm-arm/arch-clps711x/dma.h
- *
- *  Copyright (C) 1997,1998 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
diff --git a/include/asm-arm/arch-clps711x/entry-macro.S b/include/asm-arm/arch-clps711x/entry-macro.S
deleted file mode 100644
index cd8c5a0bc7bc..000000000000
--- a/include/asm-arm/arch-clps711x/entry-macro.S
+++ /dev/null
@@ -1,58 +0,0 @@
-/*
- * include/asm-arm/arch-clps711x/entry-macro.S
- *
- * Low-level IRQ helper macros for CLPS711X-based platforms
- *
- * This file is licensed under  the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-#include <asm/hardware.h>
-#include <asm/hardware/clps7111.h>
-
-		.macro	disable_fiq
-		.endm
-
-		.macro	get_irqnr_preamble, base, tmp
-		.endm
-
-		.macro	arch_ret_to_user, tmp1, tmp2
-		.endm
-
-#if (INTSR2 - INTSR1) != (INTMR2 - INTMR1)
-#error INTSR stride != INTMR stride
-#endif
-
-		.macro	get_irqnr_and_base, irqnr, stat, base, mask
-		mov	\base, #CLPS7111_BASE
-		ldr	\stat, [\base, #INTSR1]
-		ldr	\mask, [\base, #INTMR1]
-		mov	\irqnr, #4
-		mov	\mask, \mask, lsl #16
-		and	\stat, \stat, \mask, lsr #16
-		movs	\stat, \stat, lsr #4
-		bne	1001f
-
-		add	\base, \base, #INTSR2 - INTSR1
-		ldr	\stat, [\base, #INTSR1]
-		ldr	\mask, [\base, #INTMR1]
-		mov	\irqnr, #16
-		mov	\mask, \mask, lsl #16
-		and	\stat, \stat, \mask, lsr #16
-
-1001:		tst	\stat, #255
-		addeq	\irqnr, \irqnr, #8
-		moveq	\stat, \stat, lsr #8
-		tst	\stat, #15
-		addeq	\irqnr, \irqnr, #4
-		moveq	\stat, \stat, lsr #4
-		tst	\stat, #3
-		addeq	\irqnr, \irqnr, #2
-		moveq	\stat, \stat, lsr #2
-		tst	\stat, #1
-		addeq	\irqnr, \irqnr, #1
-		moveq	\stat, \stat, lsr #1
-		tst	\stat, #1			@ bit 0 should be set
-		.endm
-
-
diff --git a/include/asm-arm/arch-clps711x/hardware.h b/include/asm-arm/arch-clps711x/hardware.h
deleted file mode 100644
index 0fdbe72fff2a..000000000000
--- a/include/asm-arm/arch-clps711x/hardware.h
+++ /dev/null
@@ -1,237 +0,0 @@
-/*
- *  linux/include/asm-arm/arch-clps711x/hardware.h
- *
- *  This file contains the hardware definitions of the Prospector P720T.
- *
- *  Copyright (C) 2000 Deep Blue Solutions Ltd.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-#ifndef __ASM_ARCH_HARDWARE_H
-#define __ASM_ARCH_HARDWARE_H
-
-
-#define CLPS7111_VIRT_BASE	0xff000000
-#define CLPS7111_BASE		CLPS7111_VIRT_BASE
-
-/*
- * The physical addresses that the external chip select signals map to is
- * dependent on the setting of the nMEDCHG signal on EP7211 and EP7212
- * processors.  CONFIG_EP72XX_BOOT_ROM is only available if these
- * processors are in use.
- */
-#ifndef CONFIG_EP72XX_ROM_BOOT
-#define CS0_PHYS_BASE		(0x00000000)
-#define CS1_PHYS_BASE		(0x10000000)
-#define CS2_PHYS_BASE		(0x20000000)
-#define CS3_PHYS_BASE		(0x30000000)
-#define CS4_PHYS_BASE		(0x40000000)
-#define CS5_PHYS_BASE		(0x50000000)
-#define CS6_PHYS_BASE		(0x60000000)
-#define CS7_PHYS_BASE		(0x70000000)
-#else
-#define CS0_PHYS_BASE		(0x70000000)
-#define CS1_PHYS_BASE		(0x60000000)
-#define CS2_PHYS_BASE		(0x50000000)
-#define CS3_PHYS_BASE		(0x40000000)
-#define CS4_PHYS_BASE		(0x30000000)
-#define CS5_PHYS_BASE		(0x20000000)
-#define CS6_PHYS_BASE		(0x10000000)
-#define CS7_PHYS_BASE		(0x00000000)
-#endif
-
-#if defined (CONFIG_ARCH_EP7211)
-
-#define EP7211_VIRT_BASE	CLPS7111_VIRT_BASE
-#define EP7211_BASE		CLPS7111_VIRT_BASE
-#include <asm/hardware/ep7211.h>
-
-#elif defined (CONFIG_ARCH_EP7212)
-
-#define EP7212_VIRT_BASE	CLPS7111_VIRT_BASE
-#define EP7212_BASE		CLPS7111_VIRT_BASE
-#include <asm/hardware/ep7212.h>
-
-#endif
-
-#define SYSPLD_VIRT_BASE	0xfe000000
-#define SYSPLD_BASE		SYSPLD_VIRT_BASE
-
-#ifndef __ASSEMBLER__
-
-#define PCIO_BASE		IO_BASE
-
-#endif
-
-
-#if  defined (CONFIG_ARCH_AUTCPU12)
-
-#define  CS89712_VIRT_BASE	CLPS7111_VIRT_BASE
-#define  CS89712_BASE		CLPS7111_VIRT_BASE
-
-#include <asm/hardware/clps7111.h>
-#include <asm/hardware/ep7212.h>
-#include <asm/hardware/cs89712.h>
-
-#endif
-
-
-#if defined (CONFIG_ARCH_CDB89712)
-
-#include <asm/hardware/clps7111.h>
-#include <asm/hardware/ep7212.h>
-#include <asm/hardware/cs89712.h>
-
-/* dynamic ioremap() areas */
-#define FLASH_START      0x00000000
-#define FLASH_SIZE       0x800000
-#define FLASH_WIDTH      4
-
-#define SRAM_START       0x60000000
-#define SRAM_SIZE        0xc000
-#define SRAM_WIDTH       4
-
-#define BOOTROM_START    0x70000000
-#define BOOTROM_SIZE     0x80
-#define BOOTROM_WIDTH    4
-
-
-/* static cdb89712_map_io() areas */
-#define REGISTER_START   0x80000000
-#define REGISTER_SIZE    0x4000
-#define REGISTER_BASE    0xff000000
-
-#define ETHER_START      0x20000000
-#define ETHER_SIZE       0x1000
-#define ETHER_BASE       0xfe000000
-
-#endif
-
-
-#if defined (CONFIG_ARCH_EDB7211)
-
-/*
- * The extra 8 lines of the keyboard matrix are wired to chip select 3 (nCS3) 
- * and repeat across it. This is the mapping for it.
- *
- * In jumpered boot mode, nCS3 is mapped to 0x4000000, not 0x3000000. This 
- * was cause for much consternation and headscratching. This should probably
- * be made a compile/run time kernel option.
- */
-#define EP7211_PHYS_EXTKBD		CS3_PHYS_BASE	/* physical */
-
-#define EP7211_VIRT_EXTKBD		(0xfd000000)	/* virtual */
-
-
-/*
- * The CS8900A ethernet chip has its I/O registers wired to chip select 2 
- * (nCS2). This is the mapping for it.
- *
- * In jumpered boot mode, nCS2 is mapped to 0x5000000, not 0x2000000. This 
- * was cause for much consternation and headscratching. This should probably
- * be made a compile/run time kernel option.
- */
-#define EP7211_PHYS_CS8900A		CS2_PHYS_BASE	/* physical */
-
-#define EP7211_VIRT_CS8900A		(0xfc000000)	/* virtual */
-
-
-/*
- * The two flash banks are wired to chip selects 0 and 1. This is the mapping
- * for them.
- *
- * nCS0 and nCS1 are at 0x70000000 and 0x60000000, respectively, when running
- * in jumpered boot mode.
- */
-#define EP7211_PHYS_FLASH1		CS0_PHYS_BASE	/* physical */
-#define EP7211_PHYS_FLASH2		CS1_PHYS_BASE	/* physical */
-
-#define EP7211_VIRT_FLASH1		(0xfa000000)	/* virtual */
-#define EP7211_VIRT_FLASH2		(0xfb000000)	/* virtual */
-
-#endif /* CONFIG_ARCH_EDB7211 */
-
-
-/*
- * Relevant bits in port D, which controls power to the various parts of
- * the LCD on the EDB7211.
- */
-#define EDB_PD1_LCD_DC_DC_EN	(1<<1)
-#define EDB_PD2_LCDEN		(1<<2)
-#define EDB_PD3_LCDBL		(1<<3)
-
-
-#if defined (CONFIG_ARCH_CEIVA)
-
-#define  CEIVA_VIRT_BASE	CLPS7111_VIRT_BASE
-#define  CEIVA_BASE		CLPS7111_VIRT_BASE
-
-#include <asm/hardware/clps7111.h>
-#include <asm/hardware/ep7212.h>
-
-
-/*
- * The two flash banks are wired to chip selects 0 and 1. This is the mapping
- * for them.
- *
- * nCS0 and nCS1 are at 0x70000000 and 0x60000000, respectively, when running
- * in jumpered boot mode.
- */
-#define CEIVA_PHYS_FLASH1	CS0_PHYS_BASE	/* physical */
-#define CEIVA_PHYS_FLASH2	CS1_PHYS_BASE	/* physical */
-
-#define CEIVA_VIRT_FLASH1	(0xfa000000)	/* virtual */
-#define CEIVA_VIRT_FLASH2	(0xfb000000)	/* virtual */
-
-#define CEIVA_FLASH_SIZE        0x100000
-#define CEIVA_FLASH_WIDTH       2
-
-#define SRAM_START       0x60000000
-#define SRAM_SIZE        0xc000
-#define SRAM_WIDTH       4
-
-#define BOOTROM_START    0x70000000
-#define BOOTROM_SIZE     0x80
-#define BOOTROM_WIDTH    4
-
-/*
- * SED1355 LCD controller
- */
-#define CEIVA_PHYS_SED1355	CS2_PHYS_BASE
-#define CEIVA_VIRT_SED1355	(0xfc000000)
-
-/*
- * Relevant bits in port D, which controls power to the various parts of
- * the LCD on the Ceiva Photo Max, and reset to the LCD controller.
- */
-
-// Reset line to SED1355 (must be high to operate)
-#define CEIVA_PD1_LCDRST	(1<<1)
-// LCD panel enable (set to one, to enable LCD)
-#define CEIVA_PD4_LCDEN		(1<<4)
-// Backlight (set to one, to turn on backlight
-#define CEIVA_PD5_LCDBL		(1<<5)
-
-/*
- * Relevant bits in port B, which report the status of the buttons.
- */
-
-// White button
-#define CEIVA_PB4_WHT_BTN	(1<<4)
-// Black button
-#define CEIVA_PB0_BLK_BTN	(1<<0)
-#endif // #if defined (CONFIG_ARCH_CEIVA)
-
-#endif
diff --git a/include/asm-arm/arch-clps711x/io.h b/include/asm-arm/arch-clps711x/io.h
deleted file mode 100644
index 53d790202c19..000000000000
--- a/include/asm-arm/arch-clps711x/io.h
+++ /dev/null
@@ -1,38 +0,0 @@
-/*
- *  linux/include/asm-arm/arch-clps711x/io.h
- *
- *  Copyright (C) 1999 ARM Limited
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-#ifndef __ASM_ARM_ARCH_IO_H
-#define __ASM_ARM_ARCH_IO_H
-
-#include <asm/hardware.h>
-
-#define IO_SPACE_LIMIT 0xffffffff
-
-#define __io(a)			((void __iomem *)(a))
-#define __mem_pci(a)		(a)
-
-/*
- * We don't support ins[lb]/outs[lb].  Make them fault.
- */
-#define __raw_readsb(p,d,l)	do { *(int *)0 = 0; } while (0)
-#define __raw_readsl(p,d,l)	do { *(int *)0 = 0; } while (0)
-#define __raw_writesb(p,d,l)	do { *(int *)0 = 0; } while (0)
-#define __raw_writesl(p,d,l)	do { *(int *)0 = 0; } while (0)
-
-#endif
diff --git a/include/asm-arm/arch-clps711x/irqs.h b/include/asm-arm/arch-clps711x/irqs.h
deleted file mode 100644
index 76025dc87637..000000000000
--- a/include/asm-arm/arch-clps711x/irqs.h
+++ /dev/null
@@ -1,53 +0,0 @@
-/*
- *  linux/include/asm-arm/arch-clps711x/irqs.h
- *
- *  Copyright (C) 2000 Deep Blue Solutions Ltd.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-/*
- * Interrupts from INTSR1
- */
-#define IRQ_CSINT			4
-#define IRQ_EINT1			5
-#define IRQ_EINT2			6
-#define IRQ_EINT3			7
-#define IRQ_TC1OI			8
-#define IRQ_TC2OI			9
-#define IRQ_RTCMI			10
-#define IRQ_TINT			11
-#define IRQ_UTXINT1			12
-#define IRQ_URXINT1			13
-#define IRQ_UMSINT			14
-#define IRQ_SSEOTI			15
-
-#define INT1_IRQS			(0x0000fff0)
-#define INT1_ACK_IRQS			(0x00004f10)
-
-/*
- * Interrupts from INTSR2
- */
-#define IRQ_KBDINT			(16+0)	/* bit 0 */
-#define IRQ_SS2RX			(16+1)	/* bit 1 */
-#define IRQ_SS2TX			(16+2)	/* bit 2 */
-#define IRQ_UTXINT2			(16+12)	/* bit 12 */
-#define IRQ_URXINT2			(16+13)	/* bit 13 */
-
-#define INT2_IRQS			(0x30070000)
-#define INT2_ACK_IRQS			(0x00010000)
-
-#define NR_IRQS                         30
-
diff --git a/include/asm-arm/arch-clps711x/memory.h b/include/asm-arm/arch-clps711x/memory.h
deleted file mode 100644
index 42768cc8bfb4..000000000000
--- a/include/asm-arm/arch-clps711x/memory.h
+++ /dev/null
@@ -1,94 +0,0 @@
-/*
- *  linux/include/asm-arm/arch-clps711x/memory.h
- *
- *  Copyright (C) 1999 ARM Limited
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-#ifndef __ASM_ARCH_MEMORY_H
-#define __ASM_ARCH_MEMORY_H
-
-
-/*
- * Physical DRAM offset.
- */
-#define PHYS_OFFSET	UL(0xc0000000)
-
-/*
- * Virtual view <-> DMA view memory address translations
- * virt_to_bus: Used to translate the virtual address to an
- *              address suitable to be passed to set_dma_addr
- * bus_to_virt: Used to convert an address for DMA operations
- *              to an address that the kernel can use.
- */
-
-#if defined(CONFIG_ARCH_CDB89712)
-
-#define __virt_to_bus(x)	(x)
-#define __bus_to_virt(x)	(x)
-
-#elif defined (CONFIG_ARCH_AUTCPU12)
-
-#define __virt_to_bus(x)	(x)
-#define __bus_to_virt(x)	(x)
-
-#else
-
-#define __virt_to_bus(x)	((x) - PAGE_OFFSET)
-#define __bus_to_virt(x)	((x) + PAGE_OFFSET)
-
-#endif
-
-
-/*
- * Like the SA1100, the EDB7211 has a large gap between physical RAM
- * banks.  In 2.2, the Psion (CL-PS7110) port added custom support for
- * discontiguous physical memory.  In 2.4, we can use the standard
- * Linux NUMA support.
- *
- * This is not necessary for EP7211 implementations with only one used
- * memory bank.  For those systems, simply undefine CONFIG_DISCONTIGMEM.
- */
-
-/*
- * The PS7211 allows up to 256MB max per DRAM bank, but the EDB7211
- * uses only one of the two banks (bank #1).  However, even within
- * bank #1, memory is discontiguous.
- *
- * The EDB7211 has two 8MB DRAM areas with 8MB of empty space between
- * them, so we use 24 for the node max shift to get 16MB node sizes.
- */
-
-/*
- * Because of the wide memory address space between physical RAM banks on the 
- * SA1100, it's much more convenient to use Linux's NUMA support to implement
- * our memory map representation.  Assuming all memory nodes have equal access 
- * characteristics, we then have generic discontiguous memory support.
- *
- * Of course, all this isn't mandatory for SA1100 implementations with only
- * one used memory bank.  For those, simply undefine CONFIG_DISCONTIGMEM.
- *
- * The nodes are matched with the physical memory bank addresses which are 
- * incidentally the same as virtual addresses.
- * 
- * 	node 0:  0xc0000000 - 0xc7ffffff
- * 	node 1:  0xc8000000 - 0xcfffffff
- * 	node 2:  0xd0000000 - 0xd7ffffff
- * 	node 3:  0xd8000000 - 0xdfffffff
- */
-#define NODE_MEM_SIZE_BITS	24
-
-#endif
-
diff --git a/include/asm-arm/arch-clps711x/system.h b/include/asm-arm/arch-clps711x/system.h
deleted file mode 100644
index 11e1491535a8..000000000000
--- a/include/asm-arm/arch-clps711x/system.h
+++ /dev/null
@@ -1,40 +0,0 @@
-/*
- *  linux/include/asm-arm/arch-clps711x/system.h
- *
- *  Copyright (C) 2000 Deep Blue Solutions Ltd
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-#ifndef __ASM_ARCH_SYSTEM_H
-#define __ASM_ARCH_SYSTEM_H
-
-#include <asm/hardware.h>
-#include <asm/hardware/clps7111.h>
-#include <asm/io.h>
-
-static inline void arch_idle(void)
-{
-	clps_writel(1, HALT);
-	__asm__ __volatile__(
-	"mov	r0, r0\n\
-	mov	r0, r0");
-}
-
-static inline void arch_reset(char mode)
-{
-	cpu_reset(0);
-}
-
-#endif
diff --git a/include/asm-arm/arch-clps711x/time.h b/include/asm-arm/arch-clps711x/time.h
deleted file mode 100644
index 5edaae1c61d3..000000000000
--- a/include/asm-arm/arch-clps711x/time.h
+++ /dev/null
@@ -1,49 +0,0 @@
-/*
- *  linux/include/asm-arm/arch-clps711x/time.h
- *
- *  Copyright (C) 2000 Deep Blue Solutions Ltd.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-#include <asm/leds.h>
-#include <asm/hardware/clps7111.h>
-
-extern void clps711x_setup_timer(void);
-
-/*
- * IRQ handler for the timer
- */
-static irqreturn_t
-p720t_timer_interrupt(int irq, void *dev_id)
-{
-	struct pt_regs *regs = get_irq_regs();
-	do_leds();
-	do_timer(1);
-#ifndef CONFIG_SMP
-	update_process_times(user_mode(regs));
-#endif
-	do_profile(regs);
-	return IRQ_HANDLED;
-}
-
-/*
- * Set up timer interrupt, and return the current time in seconds.
- */
-void __init time_init(void)
-{
-	clps711x_setup_timer();
-	timer_irq.handler = p720t_timer_interrupt;
-	setup_irq(IRQ_TC2OI, &timer_irq);
-}
diff --git a/include/asm-arm/arch-clps711x/timex.h b/include/asm-arm/arch-clps711x/timex.h
deleted file mode 100644
index dcbb381da3dd..000000000000
--- a/include/asm-arm/arch-clps711x/timex.h
+++ /dev/null
@@ -1,23 +0,0 @@
-/*
- *  linux/include/asm-arm/arch-clps711x/timex.h
- *
- *  Prospector 720T architecture timex specifications
- *
- *  Copyright (C) 2000 Deep Blue Solutions Ltd.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#define CLOCK_TICK_RATE 512000
diff --git a/include/asm-arm/arch-clps711x/uncompress.h b/include/asm-arm/arch-clps711x/uncompress.h
deleted file mode 100644
index 03d233ae87ce..000000000000
--- a/include/asm-arm/arch-clps711x/uncompress.h
+++ /dev/null
@@ -1,59 +0,0 @@
-/*
- *  linux/include/asm-arm/arch-clps711x/uncompress.h
- *
- *  Copyright (C) 2000 Deep Blue Solutions Ltd
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-#include <asm/arch/io.h>
-#include <asm/hardware.h>
-#include <asm/hardware/clps7111.h>
-
-#undef CLPS7111_BASE
-#define CLPS7111_BASE CLPS7111_PHYS_BASE
-
-#define __raw_readl(p)		(*(unsigned long *)(p))
-#define __raw_writel(v,p)	(*(unsigned long *)(p) = (v))
-
-#ifdef CONFIG_DEBUG_CLPS711X_UART2
-#define SYSFLGx	SYSFLG2
-#define UARTDRx	UARTDR2
-#else
-#define SYSFLGx	SYSFLG1
-#define UARTDRx	UARTDR1
-#endif
-
-/*
- * This does not append a newline
- */
-static inline void putc(int c)
-{
-	while (clps_readl(SYSFLGx) & SYSFLG_UTXFF)
-		barrier();
-	clps_writel(c, UARTDRx);
-}
-
-static inline void flush(void)
-{
-	while (clps_readl(SYSFLGx) & SYSFLG_UBUSY)
-		barrier();
-}
-
-/*
- * nothing to do
- */
-#define arch_decomp_setup()
-
-#define arch_decomp_wdog()
diff --git a/include/asm-arm/arch-clps711x/vmalloc.h b/include/asm-arm/arch-clps711x/vmalloc.h
deleted file mode 100644
index a5dfe96abc96..000000000000
--- a/include/asm-arm/arch-clps711x/vmalloc.h
+++ /dev/null
@@ -1,20 +0,0 @@
-/*
- *  linux/include/asm-arm/arch-clps711x/vmalloc.h
- *
- *  Copyright (C) 2000 Deep Blue Solutions Ltd.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-#define VMALLOC_END       (PAGE_OFFSET + 0x10000000)
diff --git a/include/asm-arm/arch-davinci/clock.h b/include/asm-arm/arch-davinci/clock.h
deleted file mode 100644
index cc168b7a14f2..000000000000
--- a/include/asm-arm/arch-davinci/clock.h
+++ /dev/null
@@ -1,22 +0,0 @@
-/*
- * include/asm-arm/arch-davinci/clock.h
- *
- * Clock control driver for DaVinci - header file
- *
- * Authors: Vladimir Barinov <source@mvista.com>
- *
- * 2007 (c) MontaVista Software, Inc. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-#ifndef __ASM_ARCH_DAVINCI_CLOCK_H
-#define __ASM_ARCH_DAVINCI_CLOCK_H
-
-struct clk;
-
-extern int clk_register(struct clk *clk);
-extern void clk_unregister(struct clk *clk);
-extern int davinci_clk_init(void);
-
-#endif
diff --git a/include/asm-arm/arch-davinci/entry-macro.S b/include/asm-arm/arch-davinci/entry-macro.S
deleted file mode 100644
index 3ebfcc5cb58e..000000000000
--- a/include/asm-arm/arch-davinci/entry-macro.S
+++ /dev/null
@@ -1,32 +0,0 @@
-/*
- * Low-level IRQ helper macros for TI DaVinci-based platforms
- *
- * Author: Kevin Hilman, MontaVista Software, Inc. <source@mvista.com>
- *
- * 2007 (c) MontaVista Software, Inc. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-#include <asm/arch/io.h>
-#include <asm/arch/irqs.h>
-
-		.macro	disable_fiq
-		.endm
-
-		.macro  get_irqnr_preamble, base, tmp
-		ldr \base, =IO_ADDRESS(DAVINCI_ARM_INTC_BASE)
-		.endm
-
-		.macro  arch_ret_to_user, tmp1, tmp2
-		.endm
-
-		.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
-		ldr \tmp, [\base, #0x14]
-		mov \tmp, \tmp, lsr #2
-		sub \irqnr, \tmp, #1
-		cmp \tmp, #0
-		.endm
-
-		.macro	irq_prio_table
-		.endm
diff --git a/include/asm-arm/arch-davinci/gpio.h b/include/asm-arm/arch-davinci/gpio.h
deleted file mode 100644
index ff8de30b2fb3..000000000000
--- a/include/asm-arm/arch-davinci/gpio.h
+++ /dev/null
@@ -1,159 +0,0 @@
-/*
- * TI DaVinci GPIO Support
- *
- * Copyright (c) 2006 David Brownell
- * Copyright (c) 2007, MontaVista Software, Inc. <source@mvista.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#ifndef	__DAVINCI_GPIO_H
-#define	__DAVINCI_GPIO_H
-
-#include <linux/io.h>
-#include <asm/hardware.h>
-
-/*
- * basic gpio routines
- *
- * board-specific init should be done by arch/.../.../board-XXX.c (maybe
- * initializing banks together) rather than boot loaders; kexec() won't
- * go through boot loaders.
- *
- * the gpio clock will be turned on when gpios are used, and you may also
- * need to pay attention to PINMUX0 and PINMUX1 to be sure those pins are
- * used as gpios, not with other peripherals.
- *
- * GPIOs are numbered 0..(DAVINCI_N_GPIO-1).  For documentation, and maybe
- * for later updates, code should write GPIO(N) or:
- *  - GPIOV18(N) for 1.8V pins, N in 0..53; same as GPIO(0)..GPIO(53)
- *  - GPIOV33(N) for 3.3V pins, N in 0..17; same as GPIO(54)..GPIO(70)
- *
- * For GPIO IRQs use gpio_to_irq(GPIO(N)) or gpio_to_irq(GPIOV33(N)) etc
- * for now, that's != GPIO(N)
- */
-#define	GPIO(X)		(X)		/* 0 <= X <= 70 */
-#define	GPIOV18(X)	(X)		/* 1.8V i/o; 0 <= X <= 53 */
-#define	GPIOV33(X)	((X)+54)	/* 3.3V i/o; 0 <= X <= 17 */
-
-struct gpio_controller {
-	u32	dir;
-	u32	out_data;
-	u32	set_data;
-	u32	clr_data;
-	u32	in_data;
-	u32	set_rising;
-	u32	clr_rising;
-	u32	set_falling;
-	u32	clr_falling;
-	u32	intstat;
-};
-
-/* The __gpio_to_controller() and __gpio_mask() functions inline to constants
- * with constant parameters; or in outlined code they execute at runtime.
- *
- * You'd access the controller directly when reading or writing more than
- * one gpio value at a time, and to support wired logic where the value
- * being driven by the cpu need not match the value read back.
- *
- * These are NOT part of the cross-platform GPIO interface
- */
-static inline struct gpio_controller *__iomem
-__gpio_to_controller(unsigned gpio)
-{
-	void *__iomem ptr;
-
-	if (gpio < 32)
-		ptr = (void *__iomem)IO_ADDRESS(DAVINCI_GPIO_BASE + 0x10);
-	else if (gpio < 64)
-		ptr = (void *__iomem)IO_ADDRESS(DAVINCI_GPIO_BASE + 0x38);
-	else if (gpio < DAVINCI_N_GPIO)
-		ptr = (void *__iomem)IO_ADDRESS(DAVINCI_GPIO_BASE + 0x60);
-	else
-		ptr = NULL;
-	return ptr;
-}
-
-static inline u32 __gpio_mask(unsigned gpio)
-{
-	return 1 << (gpio % 32);
-}
-
-/* The get/set/clear functions will inline when called with constant
- * parameters, for low-overhead bitbanging.  Illegal constant parameters
- * cause link-time errors.
- *
- * Otherwise, calls with variable parameters use outlined functions.
- */
-extern int __error_inval_gpio(void);
-
-extern void __gpio_set(unsigned gpio, int value);
-extern int __gpio_get(unsigned gpio);
-
-static inline void gpio_set_value(unsigned gpio, int value)
-{
-	if (__builtin_constant_p(value)) {
-		struct gpio_controller	*__iomem g;
-		u32			mask;
-
-		if (gpio >= DAVINCI_N_GPIO)
-			__error_inval_gpio();
-
-		g = __gpio_to_controller(gpio);
-		mask = __gpio_mask(gpio);
-		if (value)
-			__raw_writel(mask, &g->set_data);
-		else
-			__raw_writel(mask, &g->clr_data);
-		return;
-	}
-
-	__gpio_set(gpio, value);
-}
-
-/* Returns zero or nonzero; works for gpios configured as inputs OR
- * as outputs.
- *
- * NOTE: changes in reported values are synchronized to the GPIO clock.
- * This is most easily seen after calling gpio_set_value() and then immediatly
- * gpio_get_value(), where the gpio_get_value() would return the old value
- * until the GPIO clock ticks and the new value gets latched.
- */
-
-static inline int gpio_get_value(unsigned gpio)
-{
-	struct gpio_controller *__iomem g;
-
-	if (!__builtin_constant_p(gpio))
-		return __gpio_get(gpio);
-
-	if (gpio >= DAVINCI_N_GPIO)
-		return __error_inval_gpio();
-
-	g = __gpio_to_controller(gpio);
-	return !!(__gpio_mask(gpio) & __raw_readl(&g->in_data));
-}
-
-/* powerup default direction is IN */
-extern int gpio_direction_input(unsigned gpio);
-extern int gpio_direction_output(unsigned gpio, int value);
-
-#include <asm-generic/gpio.h>	/* cansleep wrappers */
-
-extern int gpio_request(unsigned gpio, const char *tag);
-extern void gpio_free(unsigned gpio);
-
-static inline int gpio_to_irq(unsigned gpio)
-{
-	return DAVINCI_N_AINTC_IRQ + gpio;
-}
-
-static inline int irq_to_gpio(unsigned irq)
-{
-	return irq - DAVINCI_N_AINTC_IRQ;
-}
-
-#endif				/* __DAVINCI_GPIO_H */
diff --git a/include/asm-arm/arch-davinci/serial.h b/include/asm-arm/arch-davinci/serial.h
deleted file mode 100644
index ed418ef76805..000000000000
--- a/include/asm-arm/arch-davinci/serial.h
+++ /dev/null
@@ -1,20 +0,0 @@
-/*
- * DaVinci serial device definitions
- *
- * Author: Kevin Hilman, MontaVista Software, Inc. <source@mvista.com>
- *
- * 2007 (c) MontaVista Software, Inc. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-#ifndef __ASM_ARCH_SERIAL_H
-#define __ASM_ARCH_SERIAL_H
-
-#include <asm/arch/io.h>
-
-#define DAVINCI_UART0_BASE   (IO_PHYS + 0x20000)
-#define DAVINCI_UART1_BASE   (IO_PHYS + 0x20400)
-#define DAVINCI_UART2_BASE   (IO_PHYS + 0x20800)
-
-#endif /* __ASM_ARCH_SERIAL_H */
diff --git a/include/asm-arm/arch-davinci/system.h b/include/asm-arm/arch-davinci/system.h
deleted file mode 100644
index 440ac515804b..000000000000
--- a/include/asm-arm/arch-davinci/system.h
+++ /dev/null
@@ -1,29 +0,0 @@
-/*
- * DaVinci system defines
- *
- * Author: Kevin Hilman, MontaVista Software, Inc. <source@mvista.com>
- *
- * 2007 (c) MontaVista Software, Inc. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-#ifndef __ASM_ARCH_SYSTEM_H
-#define __ASM_ARCH_SYSTEM_H
-
-#include <asm/io.h>
-#include <asm/hardware.h>
-
-extern void davinci_watchdog_reset(void);
-
-static void arch_idle(void)
-{
-	cpu_do_idle();
-}
-
-static void arch_reset(char mode)
-{
-	davinci_watchdog_reset();
-}
-
-#endif /* __ASM_ARCH_SYSTEM_H */
diff --git a/include/asm-arm/arch-davinci/uncompress.h b/include/asm-arm/arch-davinci/uncompress.h
deleted file mode 100644
index f6d1570f7206..000000000000
--- a/include/asm-arm/arch-davinci/uncompress.h
+++ /dev/null
@@ -1,35 +0,0 @@
-/*
- * Serial port stubs for kernel decompress status messages
- *
- *  Author:     Anant Gole
- * (C) Copyright (C) 2006, Texas Instruments, Inc
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2. This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
- */
-
-#include <linux/types.h>
-#include <linux/serial_reg.h>
-#include <asm/arch/serial.h>
-
-/* PORT_16C550A, in polled non-fifo mode */
-
-static void putc(char c)
-{
-	volatile u32 *uart = (volatile void *) DAVINCI_UART0_BASE;
-
-	while (!(uart[UART_LSR] & UART_LSR_THRE))
-		barrier();
-	uart[UART_TX] = c;
-}
-
-static inline void flush(void)
-{
-	volatile u32 *uart = (volatile void *) DAVINCI_UART0_BASE;
-	while (!(uart[UART_LSR] & UART_LSR_THRE))
-		barrier();
-}
-
-#define arch_decomp_setup()
-#define arch_decomp_wdog()
diff --git a/include/asm-arm/arch-davinci/vmalloc.h b/include/asm-arm/arch-davinci/vmalloc.h
deleted file mode 100644
index 9b47fa89b333..000000000000
--- a/include/asm-arm/arch-davinci/vmalloc.h
+++ /dev/null
@@ -1,15 +0,0 @@
-/*
- * DaVinci vmalloc definitions
- *
- * Author: Kevin Hilman, MontaVista Software, Inc. <source@mvista.com>
- *
- * 2007 (c) MontaVista Software, Inc. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-#include <asm/memory.h>
-#include <asm/arch/io.h>
-
-/* Allow vmalloc range until the IO virtual range minus a 2M "hole" */
-#define VMALLOC_END	  (IO_VIRT - (2<<20))
diff --git a/include/asm-arm/arch-ebsa110/debug-macro.S b/include/asm-arm/arch-ebsa110/debug-macro.S
deleted file mode 100644
index 9213bfe4831d..000000000000
--- a/include/asm-arm/arch-ebsa110/debug-macro.S
+++ /dev/null
@@ -1,21 +0,0 @@
-/* linux/include/asm-arm/arch-ebsa110/debug-macro.S
- *
- * Debugging macro include header
- *
- *  Copyright (C) 1994-1999 Russell King
- *  Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
-**/
-
-		.macro	addruart,rx
-		mov	\rx, #0xf0000000
-		orr	\rx, \rx, #0x00000be0
-		.endm
-
-#define UART_SHIFT	2
-#define FLOW_CONTROL
-#include <asm/hardware/debug-8250.S>
diff --git a/include/asm-arm/arch-ebsa110/dma.h b/include/asm-arm/arch-ebsa110/dma.h
deleted file mode 100644
index c52f9e2ab0bb..000000000000
--- a/include/asm-arm/arch-ebsa110/dma.h
+++ /dev/null
@@ -1,11 +0,0 @@
-/*
- *  linux/include/asm-arm/arch-ebsa110/dma.h
- *
- *  Copyright (C) 1997,1998 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- *  EBSA110 DMA definitions
- */
diff --git a/include/asm-arm/arch-ebsa110/entry-macro.S b/include/asm-arm/arch-ebsa110/entry-macro.S
deleted file mode 100644
index f242be5c49ba..000000000000
--- a/include/asm-arm/arch-ebsa110/entry-macro.S
+++ /dev/null
@@ -1,39 +0,0 @@
-/*
- * include/asm-arm/arch-ebsa110/entry-macro.S
- *
- * Low-level IRQ helper macros for ebsa110 platform.
- *
- * This file is licensed under  the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-
-
-#define IRQ_STAT		0xff000000	/* read */
-
-	.macro	disable_fiq
-	.endm
-
-	.macro  get_irqnr_preamble, base, tmp
-	mov	\base, #IRQ_STAT
-	.endm
-
-	.macro  arch_ret_to_user, tmp1, tmp2
-	.endm
-
-	.macro	get_irqnr_and_base, irqnr, stat, base, tmp
-	ldrb	\stat, [\base]			@ get interrupts
-	mov	\irqnr, #0
-	tst	\stat, #15
-	addeq	\irqnr, \irqnr, #4
-	moveq	\stat, \stat, lsr #4
-	tst	\stat, #3
-	addeq	\irqnr, \irqnr, #2
-	moveq	\stat, \stat, lsr #2
-	tst	\stat, #1
-	addeq	\irqnr, \irqnr, #1
-	moveq	\stat, \stat, lsr #1
-	tst	\stat, #1			@ bit 0 should be set
-	.endm
-
diff --git a/include/asm-arm/arch-ebsa110/hardware.h b/include/asm-arm/arch-ebsa110/hardware.h
deleted file mode 100644
index 3ce864def41e..000000000000
--- a/include/asm-arm/arch-ebsa110/hardware.h
+++ /dev/null
@@ -1,63 +0,0 @@
-/*
- *  linux/include/asm-arm/arch-ebsa110/hardware.h
- *
- *  Copyright (C) 1996-2000 Russell King.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * This file contains the hardware definitions of the EBSA-110.
- */
-#ifndef __ASM_ARCH_HARDWARE_H
-#define __ASM_ARCH_HARDWARE_H
-
-/*
- * The EBSA110 has a weird "ISA IO" region:
- *
- * Region 0 (addr = 0xf0000000 + io << 2)
- * --------------------------------------------------------
- * Physical region	IO region
- * f0000fe0 - f0000ffc	3f8 - 3ff  ttyS0
- * f0000e60 - f0000e64	398 - 399
- * f0000de0 - f0000dfc	378 - 37f  lp0
- * f0000be0 - f0000bfc	2f8 - 2ff  ttyS1
- *
- * Region 1 (addr = 0xf0000000 + (io & ~1) << 1 + (io & 1))
- * --------------------------------------------------------
- * Physical region	IO region
- * f00014f1             a79        pnp write data
- * f00007c0 - f00007c1	3e0 - 3e1  pcmcia
- * f00004f1		279        pnp address
- * f0000440 - f000046c  220 - 236  eth0
- * f0000405		203        pnp read data
- */
-
-#define ISAMEM_PHYS		0xe0000000
-#define ISAMEM_SIZE		0x10000000
-
-#define ISAIO_PHYS		0xf0000000
-#define ISAIO_SIZE		PGDIR_SIZE
-
-#define TRICK0_PHYS		0xf2000000
-#define TRICK1_PHYS		0xf2400000
-#define TRICK2_PHYS		0xf2800000
-#define TRICK3_PHYS		0xf2c00000
-#define TRICK4_PHYS		0xf3000000
-#define TRICK5_PHYS		0xf3400000
-#define TRICK6_PHYS		0xf3800000
-#define TRICK7_PHYS		0xf3c00000
-
-#define ISAMEM_BASE		0xe0000000
-#define ISAIO_BASE		0xf0000000
-
-#define PIT_BASE		0xfc000000
-#define SOFT_BASE		0xfd000000
-
-/*
- * RAM definitions
- */
-#define UNCACHEABLE_ADDR	0xff000000	/* IRQ_STAT */
-
-#endif
-
diff --git a/include/asm-arm/arch-ebsa110/io.h b/include/asm-arm/arch-ebsa110/io.h
deleted file mode 100644
index 44a4001de807..000000000000
--- a/include/asm-arm/arch-ebsa110/io.h
+++ /dev/null
@@ -1,92 +0,0 @@
-/*
- *  linux/include/asm-arm/arch-ebsa110/io.h
- *
- *  Copyright (C) 1997,1998 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * Modifications:
- *  06-Dec-1997	RMK	Created.
- */
-#ifndef __ASM_ARM_ARCH_IO_H
-#define __ASM_ARM_ARCH_IO_H
-
-#define IO_SPACE_LIMIT 0xffff
-
-u8 __inb8(unsigned int port);
-void __outb8(u8  val, unsigned int port);
-
-u8 __inb16(unsigned int port);
-void __outb16(u8  val, unsigned int port);
-
-u16 __inw(unsigned int port);
-void __outw(u16 val, unsigned int port);
-
-u32 __inl(unsigned int port);
-void __outl(u32 val, unsigned int port);
-
-u8  __readb(const volatile void __iomem *addr);
-u16 __readw(const volatile void __iomem *addr);
-u32 __readl(const volatile void __iomem *addr);
-
-void __writeb(u8  val, void __iomem *addr);
-void __writew(u16 val, void __iomem *addr);
-void __writel(u32 val, void __iomem *addr);
-
-/*
- * Argh, someone forgot the IOCS16 line.  We therefore have to handle
- * the byte stearing by selecting the correct byte IO functions here.
- */
-#ifdef ISA_SIXTEEN_BIT_PERIPHERAL
-#define inb(p) 			__inb16(p)
-#define outb(v,p)		__outb16(v,p)
-#else
-#define inb(p)			__inb8(p)
-#define outb(v,p)		__outb8(v,p)
-#endif
-
-#define inw(p)			__inw(p)
-#define outw(v,p)		__outw(v,p)
-
-#define inl(p)			__inl(p)
-#define outl(v,p)		__outl(v,p)
-
-#define readb(b)		__readb(b)
-#define readw(b)		__readw(b)
-#define readl(b)		__readl(b)
-#define readb_relaxed(addr)	readb(addr)
-#define readw_relaxed(addr)	readw(addr)
-#define readl_relaxed(addr)	readl(addr)
-
-#define writeb(v,b)		__writeb(v,b)
-#define writew(v,b)		__writew(v,b)
-#define writel(v,b)		__writel(v,b)
-
-static inline void __iomem *__arch_ioremap(unsigned long cookie, size_t size,
-					   unsigned int flags)
-{
-	return (void __iomem *)cookie;
-}
-
-#define __arch_ioremap		__arch_ioremap
-#define __arch_iounmap(cookie)	do { } while (0)
-
-extern void insb(unsigned int port, void *buf, int sz);
-extern void insw(unsigned int port, void *buf, int sz);
-extern void insl(unsigned int port, void *buf, int sz);
-
-extern void outsb(unsigned int port, const void *buf, int sz);
-extern void outsw(unsigned int port, const void *buf, int sz);
-extern void outsl(unsigned int port, const void *buf, int sz);
-
-/* can't support writesb atm */
-extern void writesw(void __iomem *addr, const void *data, int wordlen);
-extern void writesl(void __iomem *addr, const void *data, int longlen);
-
-/* can't support readsb atm */
-extern void readsw(const void __iomem *addr, void *data, int wordlen);
-extern void readsl(const void __iomem *addr, void *data, int longlen);
-
-#endif
diff --git a/include/asm-arm/arch-ebsa110/irqs.h b/include/asm-arm/arch-ebsa110/irqs.h
deleted file mode 100644
index ded9bd9d7b8b..000000000000
--- a/include/asm-arm/arch-ebsa110/irqs.h
+++ /dev/null
@@ -1,20 +0,0 @@
-/*
- *  linux/include/asm-arm/arch-ebsa110/irqs.h
- *
- *  Copyright (C) 1996 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#define NR_IRQS			8
-
-#define IRQ_EBSA110_PRINTER	0
-#define IRQ_EBSA110_COM1	1
-#define IRQ_EBSA110_COM2	2
-#define IRQ_EBSA110_ETHERNET	3
-#define IRQ_EBSA110_TIMER0	4
-#define IRQ_EBSA110_TIMER1	5
-#define IRQ_EBSA110_PCMCIA	6
-#define IRQ_EBSA110_IMMEDIATE	7
diff --git a/include/asm-arm/arch-ebsa110/memory.h b/include/asm-arm/arch-ebsa110/memory.h
deleted file mode 100644
index c7c500e176d0..000000000000
--- a/include/asm-arm/arch-ebsa110/memory.h
+++ /dev/null
@@ -1,37 +0,0 @@
-/*
- *  linux/include/asm-arm/arch-ebsa110/memory.h
- *
- *  Copyright (C) 1996-1999 Russell King.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- *  Changelog:
- *   20-Oct-1996 RMK	Created
- *   31-Dec-1997 RMK	Fixed definitions to reduce warnings
- *   21-Mar-1999 RMK	Renamed to memory.h
- *		 RMK	Moved TASK_SIZE and PAGE_OFFSET here
- */
-#ifndef __ASM_ARCH_MEMORY_H
-#define __ASM_ARCH_MEMORY_H
-
-/*
- * Physical DRAM offset.
- */
-#define PHYS_OFFSET	UL(0x00000000)
-
-/*
- * We keep this 1:1 so that we don't interfere
- * with the PCMCIA memory regions
- */
-#define __virt_to_bus(x)	(x)
-#define __bus_to_virt(x)	(x)
-
-/*
- * Cache flushing area - SRAM
- */
-#define FLUSH_BASE_PHYS		0x40000000
-#define FLUSH_BASE		0xdf000000
-
-#endif
diff --git a/include/asm-arm/arch-ebsa110/system.h b/include/asm-arm/arch-ebsa110/system.h
deleted file mode 100644
index d7c8fece0bc5..000000000000
--- a/include/asm-arm/arch-ebsa110/system.h
+++ /dev/null
@@ -1,39 +0,0 @@
-/*
- *  linux/include/asm-arm/arch-ebsa110/system.h
- *
- *  Copyright (C) 1996-2000 Russell King.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#ifndef __ASM_ARCH_SYSTEM_H
-#define __ASM_ARCH_SYSTEM_H
-
-/*
- * EBSA110 idling methodology:
- *
- * We can not execute the "wait for interrupt" instruction since that
- * will stop our MCLK signal (which provides the clock for the glue
- * logic, and therefore the timer interrupt).
- *
- * Instead, we spin, polling the IRQ_STAT register for the occurrence
- * of any interrupt with core clock down to the memory clock.
- */
-static inline void arch_idle(void)
-{
-	const char *irq_stat = (char *)0xff000000;
-
-	/* disable clock switching */
-	asm volatile ("mcr p15, 0, ip, c15, c2, 2" : : : "cc");
-
-	/* wait for an interrupt to occur */
-	while (!*irq_stat);
-
-	/* enable clock switching */
-	asm volatile ("mcr p15, 0, ip, c15, c1, 2" : : : "cc");
-}
-
-#define arch_reset(mode)	cpu_reset(0x80000000)
-
-#endif
diff --git a/include/asm-arm/arch-ebsa110/timex.h b/include/asm-arm/arch-ebsa110/timex.h
deleted file mode 100644
index 1e9ef045092b..000000000000
--- a/include/asm-arm/arch-ebsa110/timex.h
+++ /dev/null
@@ -1,19 +0,0 @@
-/*
- *  linux/include/asm-arm/arch-ebsa110/timex.h
- *
- *  Copyright (C) 1997, 1998 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- *  EBSA110 architecture timex specifications
- */
-
-/*
- * On the EBSA, the clock ticks at weird rates.
- * This is therefore not used to calculate the
- * divisor.
- */
-#define CLOCK_TICK_RATE		47894000
-
diff --git a/include/asm-arm/arch-ebsa110/uncompress.h b/include/asm-arm/arch-ebsa110/uncompress.h
deleted file mode 100644
index ae5b775eb0b7..000000000000
--- a/include/asm-arm/arch-ebsa110/uncompress.h
+++ /dev/null
@@ -1,45 +0,0 @@
-/*
- *  linux/include/asm-arm/arch-ebsa110/uncompress.h
- *
- *  Copyright (C) 1996,1997,1998 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/serial_reg.h>
-
-#define SERIAL_BASE	((unsigned char *)0xf0000be0)
-
-/*
- * This does not append a newline
- */
-static inline void putc(int c)
-{
-	unsigned char v, *base = SERIAL_BASE;
-
-	do {
-		v = base[UART_LSR << 2];
-		barrier();
-	} while (!(v & UART_LSR_THRE));
-
-	base[UART_TX << 2] = c;
-}
-
-static inline void flush(void)
-{
-	unsigned char v, *base = SERIAL_BASE;
-
-	do {
-		v = base[UART_LSR << 2];
-		barrier();
-	} while ((v & (UART_LSR_TEMT|UART_LSR_THRE)) !=
-		 (UART_LSR_TEMT|UART_LSR_THRE));
-}
-
-/*
- * nothing to do
- */
-#define arch_decomp_setup()
-#define arch_decomp_wdog()
diff --git a/include/asm-arm/arch-ebsa110/vmalloc.h b/include/asm-arm/arch-ebsa110/vmalloc.h
deleted file mode 100644
index 26674ba4683c..000000000000
--- a/include/asm-arm/arch-ebsa110/vmalloc.h
+++ /dev/null
@@ -1,10 +0,0 @@
-/*
- *  linux/include/asm-arm/arch-ebsa110/vmalloc.h
- *
- *  Copyright (C) 1998 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#define VMALLOC_END       (PAGE_OFFSET + 0x1f000000)
diff --git a/include/asm-arm/arch-ebsa285/debug-macro.S b/include/asm-arm/arch-ebsa285/debug-macro.S
deleted file mode 100644
index b48cec4a0c45..000000000000
--- a/include/asm-arm/arch-ebsa285/debug-macro.S
+++ /dev/null
@@ -1,57 +0,0 @@
-/* linux/include/asm-arm/arch-ebsa285/debug-macro.S
- *
- * Debugging macro include header
- *
- *  Copyright (C) 1994-1999 Russell King
- *  Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
-*/
-
-#include <asm/hardware/dec21285.h>
-
-#ifndef CONFIG_DEBUG_DC21285_PORT
-	/* For NetWinder debugging */
-		.macro	addruart,rx
-		mrc	p15, 0, \rx, c1, c0
-		tst	\rx, #1			@ MMU enabled?
-		moveq	\rx, #0x7c000000	@ physical
-		movne	\rx, #0xff000000	@ virtual
-		orr	\rx, \rx, #0x000003f8
-		.endm
-
-#define UART_SHIFT	0
-#define FLOW_CONTROL
-#include <asm/hardware/debug-8250.S>
-
-#else
-	/* For EBSA285 debugging */
-		.equ	dc21285_high, ARMCSR_BASE & 0xff000000
-		.equ	dc21285_low,  ARMCSR_BASE & 0x00ffffff
-
-		.macro	addruart,rx
-		mrc	p15, 0, \rx, c1, c0
-		tst	\rx, #1			@ MMU enabled?
-		moveq	\rx, #0x42000000
-		movne	\rx, #dc21285_high
-		.if	dc21285_low
-		orrne	\rx, \rx, #dc21285_low
-		.endif
-		.endm
-
-		.macro	senduart,rd,rx
-		str	\rd, [\rx, #0x160]	@ UARTDR
-		.endm
-
-		.macro	busyuart,rd,rx
-1001:		ldr	\rd, [\rx, #0x178]	@ UARTFLG
-		tst	\rd, #1 << 3
-		bne	1001b
-		.endm
-
-		.macro	waituart,rd,rx
-		.endm
-#endif
diff --git a/include/asm-arm/arch-ebsa285/dma.h b/include/asm-arm/arch-ebsa285/dma.h
deleted file mode 100644
index 0259ad45d33c..000000000000
--- a/include/asm-arm/arch-ebsa285/dma.h
+++ /dev/null
@@ -1,25 +0,0 @@
-/*
- *  linux/include/asm-arm/arch-ebsa285/dma.h
- *
- *  Architecture DMA routines
- *
- *  Copyright (C) 1998,1999 Russell King
- *  Copyright (C) 1998,1999 Philip Blundell
- */
-#ifndef __ASM_ARCH_DMA_H
-#define __ASM_ARCH_DMA_H
-
-/*
- * The 21285 has two internal DMA channels; we call these 8 and 9.
- * On CATS hardware we have an additional eight ISA dma channels
- * numbered 0..7.
- */
-#define _ISA_DMA(x)		(0+(x))
-#define _DC21285_DMA(x)		(8+(x))
-
-#define MAX_DMA_CHANNELS	10
-
-#define DMA_FLOPPY		_ISA_DMA(2)
-#define DMA_ISA_CASCADE		_ISA_DMA(4)
-
-#endif /* _ASM_ARCH_DMA_H */
diff --git a/include/asm-arm/arch-ebsa285/entry-macro.S b/include/asm-arm/arch-ebsa285/entry-macro.S
deleted file mode 100644
index e63064edb734..000000000000
--- a/include/asm-arm/arch-ebsa285/entry-macro.S
+++ /dev/null
@@ -1,113 +0,0 @@
-/*
- * include/asm-arm/arch-ebsa285/entry-macro.S
- *
- * Low-level IRQ helper macros for footbridge-based platforms
- *
- * This file is licensed under  the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-#include <asm/hardware.h>
-#include <asm/arch/irqs.h>
-#include <asm/hardware/dec21285.h>
-
-		.equ	dc21285_high, ARMCSR_BASE & 0xff000000
-		.equ	dc21285_low, ARMCSR_BASE & 0x00ffffff
-
-		.macro	disable_fiq
-		.endm
-
-		.macro  get_irqnr_preamble, base, tmp
-		mov	\base, #dc21285_high
-		.if	dc21285_low
-		orr	\base, \base, #dc21285_low
-		.endif
-		.endm
-
-		.macro  arch_ret_to_user, tmp1, tmp2
-		.endm
-
-		.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
-		ldr	\irqstat, [\base, #0x180]	@ get interrupts
-
-		mov	\irqnr, #IRQ_SDRAMPARITY
-		tst	\irqstat, #IRQ_MASK_SDRAMPARITY
-		bne	1001f
-
-		tst	\irqstat, #IRQ_MASK_UART_RX
-		movne	\irqnr, #IRQ_CONRX
-		bne	1001f
-
-		tst	\irqstat, #IRQ_MASK_DMA1
-		movne	\irqnr, #IRQ_DMA1
-		bne	1001f
-
-		tst	\irqstat, #IRQ_MASK_DMA2
-		movne	\irqnr, #IRQ_DMA2
-		bne	1001f
-
-		tst	\irqstat, #IRQ_MASK_IN0
-		movne	\irqnr, #IRQ_IN0
-		bne	1001f
-
-		tst	\irqstat, #IRQ_MASK_IN1
-		movne	\irqnr, #IRQ_IN1
-		bne	1001f
-
-		tst	\irqstat, #IRQ_MASK_IN2
-		movne	\irqnr, #IRQ_IN2
-		bne	1001f
-
-		tst	\irqstat, #IRQ_MASK_IN3
-		movne	\irqnr, #IRQ_IN3
-		bne	1001f
-
-		tst	\irqstat, #IRQ_MASK_PCI
-		movne	\irqnr, #IRQ_PCI
-		bne	1001f
-
-		tst	\irqstat, #IRQ_MASK_DOORBELLHOST
-		movne	\irqnr, #IRQ_DOORBELLHOST
-		bne     1001f
-
-		tst	\irqstat, #IRQ_MASK_I2OINPOST
-		movne	\irqnr, #IRQ_I2OINPOST
-		bne	1001f
-
-		tst	\irqstat, #IRQ_MASK_TIMER1
-		movne	\irqnr, #IRQ_TIMER1
-		bne	1001f
-
-		tst	\irqstat, #IRQ_MASK_TIMER2
-		movne	\irqnr, #IRQ_TIMER2
-		bne	1001f
-
-		tst	\irqstat, #IRQ_MASK_TIMER3
-		movne	\irqnr, #IRQ_TIMER3
-		bne	1001f
-
-		tst	\irqstat, #IRQ_MASK_UART_TX
-		movne	\irqnr, #IRQ_CONTX
-		bne	1001f
-
-		tst	\irqstat, #IRQ_MASK_PCI_ABORT
-		movne	\irqnr, #IRQ_PCI_ABORT
-		bne	1001f
-
-		tst	\irqstat, #IRQ_MASK_PCI_SERR
-		movne	\irqnr, #IRQ_PCI_SERR
-		bne	1001f
-
-		tst	\irqstat, #IRQ_MASK_DISCARD_TIMER
-		movne	\irqnr, #IRQ_DISCARD_TIMER
-		bne	1001f
-
-		tst	\irqstat, #IRQ_MASK_PCI_DPERR
-		movne	\irqnr, #IRQ_PCI_DPERR
-		bne	1001f
-
-		tst	\irqstat, #IRQ_MASK_PCI_PERR
-		movne	\irqnr, #IRQ_PCI_PERR
-1001:
-		.endm
-
diff --git a/include/asm-arm/arch-ebsa285/hardware.h b/include/asm-arm/arch-ebsa285/hardware.h
deleted file mode 100644
index 74610c2c63d4..000000000000
--- a/include/asm-arm/arch-ebsa285/hardware.h
+++ /dev/null
@@ -1,105 +0,0 @@
-/*
- *  linux/include/asm-arm/arch-ebsa285/hardware.h
- *
- *  Copyright (C) 1998-1999 Russell King.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- *  This file contains the hardware definitions of the EBSA-285.
- */
-#ifndef __ASM_ARCH_HARDWARE_H
-#define __ASM_ARCH_HARDWARE_H
-
-#include <asm/arch/memory.h>
-
-/*   Virtual      Physical	Size
- * 0xff800000	0x40000000	1MB	X-Bus
- * 0xff000000	0x7c000000	1MB	PCI I/O space
- * 0xfe000000	0x42000000	1MB	CSR
- * 0xfd000000	0x78000000	1MB	Outbound write flush (not supported)
- * 0xfc000000	0x79000000	1MB	PCI IACK/special space
- * 0xfb000000	0x7a000000	16MB	PCI Config type 1
- * 0xfa000000	0x7b000000	16MB	PCI Config type 0
- * 0xf9000000	0x50000000	1MB	Cache flush
- * 0xf0000000	0x80000000	16MB	ISA memory
- */
-#define XBUS_SIZE		0x00100000
-#define XBUS_BASE		0xff800000
-
-#define PCIO_SIZE		0x00100000
-#define PCIO_BASE		0xff000000
-
-#define ARMCSR_SIZE		0x00100000
-#define ARMCSR_BASE		0xfe000000
-
-#define WFLUSH_SIZE		0x00100000
-#define WFLUSH_BASE		0xfd000000
-
-#define PCIIACK_SIZE		0x00100000
-#define PCIIACK_BASE		0xfc000000
-
-#define PCICFG1_SIZE		0x01000000
-#define PCICFG1_BASE		0xfb000000
-
-#define PCICFG0_SIZE		0x01000000
-#define PCICFG0_BASE		0xfa000000
-
-#define PCIMEM_SIZE		0x01000000
-#define PCIMEM_BASE		0xf0000000
-
-#define XBUS_LEDS		((volatile unsigned char *)(XBUS_BASE + 0x12000))
-#define XBUS_LED_AMBER		(1 << 0)
-#define XBUS_LED_GREEN		(1 << 1)
-#define XBUS_LED_RED		(1 << 2)
-#define XBUS_LED_TOGGLE		(1 << 8)
-
-#define XBUS_SWITCH		((volatile unsigned char *)(XBUS_BASE + 0x12000))
-#define XBUS_SWITCH_SWITCH	((*XBUS_SWITCH) & 15)
-#define XBUS_SWITCH_J17_13	((*XBUS_SWITCH) & (1 << 4))
-#define XBUS_SWITCH_J17_11	((*XBUS_SWITCH) & (1 << 5))
-#define XBUS_SWITCH_J17_9	((*XBUS_SWITCH) & (1 << 6))
-
-#define UNCACHEABLE_ADDR	(ARMCSR_BASE + 0x108)
-
-
-/* PIC irq control */
-#define PIC_LO			0x20
-#define PIC_MASK_LO		0x21
-#define PIC_HI			0xA0
-#define PIC_MASK_HI		0xA1
-
-/* GPIO pins */
-#define GPIO_CCLK		0x800
-#define GPIO_DSCLK		0x400
-#define GPIO_E2CLK		0x200
-#define GPIO_IOLOAD		0x100
-#define GPIO_RED_LED		0x080
-#define GPIO_WDTIMER		0x040
-#define GPIO_DATA		0x020
-#define GPIO_IOCLK		0x010
-#define GPIO_DONE		0x008
-#define GPIO_FAN		0x004
-#define GPIO_GREEN_LED		0x002
-#define GPIO_RESET		0x001
-
-/* CPLD pins */
-#define CPLD_DS_ENABLE		8
-#define CPLD_7111_DISABLE	4
-#define CPLD_UNMUTE		2
-#define CPLD_FLASH_WR_ENABLE	1
-
-#ifndef __ASSEMBLY__
-extern void gpio_modify_op(int mask, int set);
-extern void gpio_modify_io(int mask, int in);
-extern int  gpio_read(void);
-extern void cpld_modify(int mask, int set);
-#endif
-
-#define pcibios_assign_all_busses()	1
-
-#define PCIBIOS_MIN_IO		0x1000
-#define PCIBIOS_MIN_MEM 	0x81000000
-
-#endif
diff --git a/include/asm-arm/arch-ebsa285/io.h b/include/asm-arm/arch-ebsa285/io.h
deleted file mode 100644
index f9c729141860..000000000000
--- a/include/asm-arm/arch-ebsa285/io.h
+++ /dev/null
@@ -1,39 +0,0 @@
-/*
- *  linux/include/asm-arm/arch-ebsa285/io.h
- *
- *  Copyright (C) 1997-1999 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- *  Modifications:
- *   06-12-1997	RMK	Created.
- *   07-04-1999	RMK	Major cleanup
- */
-#ifndef __ASM_ARM_ARCH_IO_H
-#define __ASM_ARM_ARCH_IO_H
-
-#include <asm/hardware.h>
-
-#define IO_SPACE_LIMIT 0xffff
-
-/*
- * Translation of various region addresses to virtual addresses
- */
-#define __io(a)			((void __iomem *)(PCIO_BASE + (a)))
-#if 1
-#define __mem_pci(a)		(a)
-#else
-
-static inline void __iomem *___mem_pci(void __iomem *p)
-{
-	unsigned long a = (unsigned long)p;
-	BUG_ON(a <= 0xc0000000 || a >= 0xe0000000);
-	return p;
-}
-
-#define __mem_pci(a)		___mem_pci(a)
-#endif
-
-#endif
diff --git a/include/asm-arm/arch-ebsa285/irqs.h b/include/asm-arm/arch-ebsa285/irqs.h
deleted file mode 100644
index 3e766f1cecf1..000000000000
--- a/include/asm-arm/arch-ebsa285/irqs.h
+++ /dev/null
@@ -1,98 +0,0 @@
-/*
- * linux/include/asm-arm/arch-ebsa285/irqs.h
- *
- * Copyright (C) 1998 Russell King
- * Copyright (C) 1998 Phil Blundell
- *
- * Changelog:
- *  20-Jan-1998	RMK	Started merge of EBSA286, CATS and NetWinder
- *  01-Feb-1999	PJB	ISA IRQs start at 0 not 16
- */
-#include <asm/mach-types.h>
-
-#define NR_IRQS			36
-#define NR_DC21285_IRQS		16
-
-#define _ISA_IRQ(x)		(0 + (x))
-#define _ISA_INR(x)		((x) - 0)
-#define _DC21285_IRQ(x)		(16 + (x))
-#define _DC21285_INR(x)		((x) - 16)
-
-/*
- * This is a list of all interrupts that the 21285
- * can generate and we handle.
- */
-#define IRQ_CONRX		_DC21285_IRQ(0)
-#define IRQ_CONTX		_DC21285_IRQ(1)
-#define IRQ_TIMER1		_DC21285_IRQ(2)
-#define IRQ_TIMER2		_DC21285_IRQ(3)
-#define IRQ_TIMER3		_DC21285_IRQ(4)
-#define IRQ_IN0			_DC21285_IRQ(5)
-#define IRQ_IN1			_DC21285_IRQ(6)
-#define IRQ_IN2			_DC21285_IRQ(7)
-#define IRQ_IN3			_DC21285_IRQ(8)
-#define IRQ_DOORBELLHOST	_DC21285_IRQ(9)
-#define IRQ_DMA1		_DC21285_IRQ(10)
-#define IRQ_DMA2		_DC21285_IRQ(11)
-#define IRQ_PCI			_DC21285_IRQ(12)
-#define IRQ_SDRAMPARITY		_DC21285_IRQ(13)
-#define IRQ_I2OINPOST		_DC21285_IRQ(14)
-#define IRQ_PCI_ABORT		_DC21285_IRQ(15)
-#define IRQ_PCI_SERR		_DC21285_IRQ(16)
-#define IRQ_DISCARD_TIMER	_DC21285_IRQ(17)
-#define IRQ_PCI_DPERR		_DC21285_IRQ(18)
-#define IRQ_PCI_PERR		_DC21285_IRQ(19)
-
-#define IRQ_ISA_TIMER		_ISA_IRQ(0)
-#define IRQ_ISA_KEYBOARD	_ISA_IRQ(1)
-#define IRQ_ISA_CASCADE		_ISA_IRQ(2)
-#define IRQ_ISA_UART2		_ISA_IRQ(3)
-#define IRQ_ISA_UART		_ISA_IRQ(4)
-#define IRQ_ISA_FLOPPY		_ISA_IRQ(6)
-#define IRQ_ISA_PRINTER		_ISA_IRQ(7)
-#define IRQ_ISA_RTC_ALARM	_ISA_IRQ(8)
-#define IRQ_ISA_2		_ISA_IRQ(9)
-#define IRQ_ISA_PS2MOUSE	_ISA_IRQ(12)
-#define IRQ_ISA_HARDDISK1	_ISA_IRQ(14)
-#define IRQ_ISA_HARDDISK2	_ISA_IRQ(15)
-
-#define IRQ_MASK_UART_RX	(1 << 2)
-#define IRQ_MASK_UART_TX	(1 << 3)
-#define IRQ_MASK_TIMER1		(1 << 4)
-#define IRQ_MASK_TIMER2		(1 << 5)
-#define IRQ_MASK_TIMER3		(1 << 6)
-#define IRQ_MASK_IN0		(1 << 8)
-#define IRQ_MASK_IN1		(1 << 9)
-#define IRQ_MASK_IN2		(1 << 10)
-#define IRQ_MASK_IN3		(1 << 11)
-#define IRQ_MASK_DOORBELLHOST	(1 << 15)
-#define IRQ_MASK_DMA1		(1 << 16)
-#define IRQ_MASK_DMA2		(1 << 17)
-#define IRQ_MASK_PCI		(1 << 18)
-#define IRQ_MASK_SDRAMPARITY	(1 << 24)
-#define IRQ_MASK_I2OINPOST	(1 << 25)
-#define IRQ_MASK_PCI_ABORT	((1 << 29) | (1 << 30))
-#define IRQ_MASK_PCI_SERR	(1 << 23)
-#define IRQ_MASK_DISCARD_TIMER	(1 << 27)
-#define IRQ_MASK_PCI_DPERR	(1 << 28)
-#define IRQ_MASK_PCI_PERR	(1 << 31)
-
-/*
- * Netwinder interrupt allocations
- */
-#define IRQ_NETWINDER_ETHER10	IRQ_IN0
-#define IRQ_NETWINDER_ETHER100	IRQ_IN1
-#define IRQ_NETWINDER_VIDCOMP	IRQ_IN2
-#define IRQ_NETWINDER_PS2MOUSE	_ISA_IRQ(5)
-#define IRQ_NETWINDER_IR	_ISA_IRQ(6)
-#define IRQ_NETWINDER_BUTTON	_ISA_IRQ(10)
-#define IRQ_NETWINDER_VGA	_ISA_IRQ(11)
-#define IRQ_NETWINDER_SOUND	_ISA_IRQ(12)
-
-#undef RTC_IRQ
-#define RTC_IRQ		IRQ_ISA_RTC_ALARM
-#define I8042_KBD_IRQ	IRQ_ISA_KEYBOARD
-#define I8042_AUX_IRQ	(machine_is_netwinder() ? IRQ_NETWINDER_PS2MOUSE : IRQ_ISA_PS2MOUSE)
-#define IRQ_FLOPPYDISK	IRQ_ISA_FLOPPY
-
-#define irq_canonicalize(_i)	(((_i) == IRQ_ISA_CASCADE) ? IRQ_ISA_2 : _i)
diff --git a/include/asm-arm/arch-ebsa285/memory.h b/include/asm-arm/arch-ebsa285/memory.h
deleted file mode 100644
index 9019a3bf5ab9..000000000000
--- a/include/asm-arm/arch-ebsa285/memory.h
+++ /dev/null
@@ -1,67 +0,0 @@
-/*
- *  linux/include/asm-arm/arch-ebsa285/memory.h
- *
- *  Copyright (C) 1996-1999 Russell King.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- *  Changelog:
- *   20-Oct-1996 RMK	Created
- *   31-Dec-1997 RMK	Fixed definitions to reduce warnings.
- *   17-May-1998 DAG	Added __virt_to_bus and __bus_to_virt functions.
- *   21-Nov-1998 RMK	Changed __virt_to_bus and __bus_to_virt to macros.
- *   21-Mar-1999 RMK	Added PAGE_OFFSET for co285 architecture.
- *			Renamed to memory.h
- *			Moved PAGE_OFFSET and TASK_SIZE here
- */
-#ifndef __ASM_ARCH_MEMORY_H
-#define __ASM_ARCH_MEMORY_H
-
-
-#if defined(CONFIG_FOOTBRIDGE_ADDIN)
-/*
- * If we may be using add-in footbridge mode, then we must
- * use the out-of-line translation that makes use of the
- * PCI BAR
- */
-#ifndef __ASSEMBLY__
-extern unsigned long __virt_to_bus(unsigned long);
-extern unsigned long __bus_to_virt(unsigned long);
-#endif
-
-#elif defined(CONFIG_FOOTBRIDGE_HOST)
-
-#define __virt_to_bus(x)	((x) - 0xe0000000)
-#define __bus_to_virt(x)	((x) + 0xe0000000)
-
-#else
-
-#error "Undefined footbridge mode"
-
-#endif
-
-/* Task size and page offset at 3GB */
-#define TASK_SIZE		UL(0xbf000000)
-#define PAGE_OFFSET		UL(0xc0000000)
-
-/*
- * Cache flushing area.
- */
-#define FLUSH_BASE		0xf9000000
-
-/*
- * Physical DRAM offset.
- */
-#define PHYS_OFFSET		UL(0x00000000)
-
-/*
- * This decides where the kernel will search for a free chunk of vm
- * space during mmap's.
- */
-#define TASK_UNMAPPED_BASE ((TASK_SIZE + 0x01000000) / 3)
-
-#define FLUSH_BASE_PHYS		0x50000000
-
-#endif
diff --git a/include/asm-arm/arch-ebsa285/system.h b/include/asm-arm/arch-ebsa285/system.h
deleted file mode 100644
index bf91c695c4b5..000000000000
--- a/include/asm-arm/arch-ebsa285/system.h
+++ /dev/null
@@ -1,69 +0,0 @@
-/*
- *  linux/include/asm-arm/arch-ebsa285/system.h
- *
- *  Copyright (C) 1996-1999 Russell King.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#include <asm/hardware/dec21285.h>
-#include <asm/io.h>
-#include <asm/hardware.h>
-#include <asm/leds.h>
-#include <asm/mach-types.h>
-
-static inline void arch_idle(void)
-{
-	cpu_do_idle();
-}
-
-static inline void arch_reset(char mode)
-{
-	if (mode == 's') {
-		/*
-		 * Jump into the ROM
-		 */
-		cpu_reset(0x41000000);
-	} else {
-		if (machine_is_netwinder()) {
-			/* open up the SuperIO chip
-			 */
-			outb(0x87, 0x370);
-			outb(0x87, 0x370);
-
-			/* aux function group 1 (logical device 7)
-			 */
-			outb(0x07, 0x370);
-			outb(0x07, 0x371);
-
-			/* set GP16 for WD-TIMER output
-			 */
-			outb(0xe6, 0x370);
-			outb(0x00, 0x371);
-
-			/* set a RED LED and toggle WD_TIMER for rebooting
-			 */
-			outb(0xc4, 0x338);
-		} else {
-			/* 
-			 * Force the watchdog to do a CPU reset.
-			 *
-			 * After making sure that the watchdog is disabled
-			 * (so we can change the timer registers) we first
-			 * enable the timer to autoreload itself.  Next, the
-			 * timer interval is set really short and any
-			 * current interrupt request is cleared (so we can
-			 * see an edge transition).  Finally, TIMER4 is
-			 * enabled as the watchdog.
-			 */
-			*CSR_SA110_CNTL &= ~(1 << 13);
-			*CSR_TIMER4_CNTL = TIMER_CNTL_ENABLE |
-					   TIMER_CNTL_AUTORELOAD |
-					   TIMER_CNTL_DIV16;
-			*CSR_TIMER4_LOAD = 0x2;
-			*CSR_TIMER4_CLR  = 0;
-			*CSR_SA110_CNTL |= (1 << 13);
-		}
-	}
-}
diff --git a/include/asm-arm/arch-ebsa285/timex.h b/include/asm-arm/arch-ebsa285/timex.h
deleted file mode 100644
index df60b3812d96..000000000000
--- a/include/asm-arm/arch-ebsa285/timex.h
+++ /dev/null
@@ -1,18 +0,0 @@
-/*
- *  linux/include/asm-arm/arch-ebsa285/timex.h
- *
- *  Copyright (C) 1998 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- *  EBSA285 architecture timex specifications
- */
-
-/*
- * We assume a constant here; this satisfies the maths in linux/timex.h
- * and linux/time.h.  CLOCK_TICK_RATE is actually system dependent, but
- * this must be a constant.
- */
-#define CLOCK_TICK_RATE		(50000000/16)
diff --git a/include/asm-arm/arch-ebsa285/uncompress.h b/include/asm-arm/arch-ebsa285/uncompress.h
deleted file mode 100644
index 86142c882b3a..000000000000
--- a/include/asm-arm/arch-ebsa285/uncompress.h
+++ /dev/null
@@ -1,38 +0,0 @@
-/*
- *  linux/include/asm-arm/arch-ebsa285/uncompress.h
- *
- *  Copyright (C) 1996-1999 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#include <asm/mach-types.h>
-
-/*
- * Note! This could cause problems on the NetWinder
- */
-#define DC21285_BASE ((volatile unsigned int *)0x42000160)
-#define SER0_BASE    ((volatile unsigned char *)0x7c0003f8)
-
-static inline void putc(char c)
-{
-	if (machine_is_netwinder()) {
-		while ((SER0_BASE[5] & 0x60) != 0x60)
-			barrier();
-		SER0_BASE[0] = c;
-	} else {
-		while (DC21285_BASE[6] & 8);
-		DC21285_BASE[0] = c;
-	}
-}
-
-static inline void flush(void)
-{
-}
-
-/*
- * nothing to do
- */
-#define arch_decomp_setup()
-#define arch_decomp_wdog()
diff --git a/include/asm-arm/arch-ebsa285/vmalloc.h b/include/asm-arm/arch-ebsa285/vmalloc.h
deleted file mode 100644
index e487d7e8c8a6..000000000000
--- a/include/asm-arm/arch-ebsa285/vmalloc.h
+++ /dev/null
@@ -1,10 +0,0 @@
-/*
- *  linux/include/asm-arm/arch-ebsa285/vmalloc.h
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-
-#define VMALLOC_END       (PAGE_OFFSET + 0x30000000)
diff --git a/include/asm-arm/arch-ep93xx/debug-macro.S b/include/asm-arm/arch-ep93xx/debug-macro.S
deleted file mode 100644
index 397565a0c671..000000000000
--- a/include/asm-arm/arch-ep93xx/debug-macro.S
+++ /dev/null
@@ -1,22 +0,0 @@
-/*
- * linux/include/asm-arm/arch-ep93xx/debug-macro.S
- * Debugging macro include header
- *
- * Copyright (C) 2006 Lennert Buytenhek <buytenh@wantstofly.org>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or (at
- * your option) any later version.
- */
-#include <asm/arch/ep93xx-regs.h>
-
-		.macro	addruart,rx
-		mrc	p15, 0, \rx, c1, c0
-		tst	\rx, #1				@ MMU enabled?
-		ldreq	\rx, =EP93XX_APB_PHYS_BASE	@ Physical base
-		ldrne	\rx, =EP93XX_APB_VIRT_BASE	@ virtual base
-		orr	\rx, \rx, #0x000c0000
-		.endm
-
-#include <asm/hardware/debug-pl01x.S>
diff --git a/include/asm-arm/arch-ep93xx/dma.h b/include/asm-arm/arch-ep93xx/dma.h
deleted file mode 100644
index 898b3ab7fd46..000000000000
--- a/include/asm-arm/arch-ep93xx/dma.h
+++ /dev/null
@@ -1,3 +0,0 @@
-/*
- * linux/include/asm-arm/arch-ep93xx/dma.h
- */
diff --git a/include/asm-arm/arch-ep93xx/entry-macro.S b/include/asm-arm/arch-ep93xx/entry-macro.S
deleted file mode 100644
index 241ec221a047..000000000000
--- a/include/asm-arm/arch-ep93xx/entry-macro.S
+++ /dev/null
@@ -1,59 +0,0 @@
-/*
- * linux/include/asm-arm/arch-ep93xx/entry-macro.S
- * IRQ demultiplexing for EP93xx
- *
- * Copyright (C) 2006 Lennert Buytenhek <buytenh@wantstofly.org>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or (at
- * your option) any later version.
- */
-#include <asm/arch/ep93xx-regs.h>
-
-		.macro	disable_fiq
-		.endm
-
-		.macro  get_irqnr_preamble, base, tmp
-		.endm
-
-		.macro  arch_ret_to_user, tmp1, tmp2
-		.endm
-
-		.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
-		ldr	\base, =(EP93XX_AHB_VIRT_BASE)
-		orr	\base, \base, #0x000b0000
-		mov	\irqnr, #0
-		ldr	\irqstat, [\base]		@ lower 32 interrupts
-		cmp	\irqstat, #0
-		bne	1001f
-
-		eor	\base, \base, #0x00070000
-		ldr	\irqstat, [\base]		@ upper 32 interrupts
-		cmp	\irqstat, #0
-		beq	1002f
-		mov	\irqnr, #0x20
-
-1001:
-		movs	\tmp, \irqstat, lsl #16
-		movne	\irqstat, \tmp
-		addeq	\irqnr, \irqnr, #16
-
-		movs	\tmp, \irqstat, lsl #8
-		movne	\irqstat, \tmp
-		addeq	\irqnr, \irqnr, #8
-
-		movs	\tmp, \irqstat, lsl #4
-		movne	\irqstat, \tmp
-		addeq	\irqnr, \irqnr, #4
-
-		movs	\tmp, \irqstat, lsl #2
-		movne	\irqstat, \tmp
-		addeq	\irqnr, \irqnr, #2
-
-		movs	\tmp, \irqstat, lsl #1
-		addeq	\irqnr, \irqnr, #1
-		orrs	\base, \base, #1
-
-1002:
-		.endm
diff --git a/include/asm-arm/arch-ep93xx/gesbc9312.h b/include/asm-arm/arch-ep93xx/gesbc9312.h
deleted file mode 100644
index 4d0b3023bff7..000000000000
--- a/include/asm-arm/arch-ep93xx/gesbc9312.h
+++ /dev/null
@@ -1,3 +0,0 @@
-/*
- * linux/include/asm-arm/arch-ep93xx/gesbc9312.h
- */
diff --git a/include/asm-arm/arch-ep93xx/gpio.h b/include/asm-arm/arch-ep93xx/gpio.h
deleted file mode 100644
index 186e7c715f8a..000000000000
--- a/include/asm-arm/arch-ep93xx/gpio.h
+++ /dev/null
@@ -1,128 +0,0 @@
-/*
- * linux/include/asm-arm/arch-ep93xx/gpio.h
- */
-
-#ifndef __ASM_ARCH_GPIO_H
-#define __ASM_ARCH_GPIO_H
-
-/* GPIO port A.  */
-#define EP93XX_GPIO_LINE_A(x)		((x) + 0)
-#define EP93XX_GPIO_LINE_EGPIO0		EP93XX_GPIO_LINE_A(0)
-#define EP93XX_GPIO_LINE_EGPIO1		EP93XX_GPIO_LINE_A(1)
-#define EP93XX_GPIO_LINE_EGPIO2		EP93XX_GPIO_LINE_A(2)
-#define EP93XX_GPIO_LINE_EGPIO3		EP93XX_GPIO_LINE_A(3)
-#define EP93XX_GPIO_LINE_EGPIO4		EP93XX_GPIO_LINE_A(4)
-#define EP93XX_GPIO_LINE_EGPIO5		EP93XX_GPIO_LINE_A(5)
-#define EP93XX_GPIO_LINE_EGPIO6		EP93XX_GPIO_LINE_A(6)
-#define EP93XX_GPIO_LINE_EGPIO7		EP93XX_GPIO_LINE_A(7)
-
-/* GPIO port B.  */
-#define EP93XX_GPIO_LINE_B(x)		((x) + 8)
-#define EP93XX_GPIO_LINE_EGPIO8		EP93XX_GPIO_LINE_B(0)
-#define EP93XX_GPIO_LINE_EGPIO9		EP93XX_GPIO_LINE_B(1)
-#define EP93XX_GPIO_LINE_EGPIO10	EP93XX_GPIO_LINE_B(2)
-#define EP93XX_GPIO_LINE_EGPIO11	EP93XX_GPIO_LINE_B(3)
-#define EP93XX_GPIO_LINE_EGPIO12	EP93XX_GPIO_LINE_B(4)
-#define EP93XX_GPIO_LINE_EGPIO13	EP93XX_GPIO_LINE_B(5)
-#define EP93XX_GPIO_LINE_EGPIO14	EP93XX_GPIO_LINE_B(6)
-#define EP93XX_GPIO_LINE_EGPIO15	EP93XX_GPIO_LINE_B(7)
-
-/* GPIO port C.  */
-#define EP93XX_GPIO_LINE_C(x)		((x) + 40)
-#define EP93XX_GPIO_LINE_ROW0		EP93XX_GPIO_LINE_C(0)
-#define EP93XX_GPIO_LINE_ROW1		EP93XX_GPIO_LINE_C(1)
-#define EP93XX_GPIO_LINE_ROW2		EP93XX_GPIO_LINE_C(2)
-#define EP93XX_GPIO_LINE_ROW3		EP93XX_GPIO_LINE_C(3)
-#define EP93XX_GPIO_LINE_ROW4		EP93XX_GPIO_LINE_C(4)
-#define EP93XX_GPIO_LINE_ROW5		EP93XX_GPIO_LINE_C(5)
-#define EP93XX_GPIO_LINE_ROW6		EP93XX_GPIO_LINE_C(6)
-#define EP93XX_GPIO_LINE_ROW7		EP93XX_GPIO_LINE_C(7)
-
-/* GPIO port D.  */
-#define EP93XX_GPIO_LINE_D(x)		((x) + 24)
-#define EP93XX_GPIO_LINE_COL0		EP93XX_GPIO_LINE_D(0)
-#define EP93XX_GPIO_LINE_COL1		EP93XX_GPIO_LINE_D(1)
-#define EP93XX_GPIO_LINE_COL2		EP93XX_GPIO_LINE_D(2)
-#define EP93XX_GPIO_LINE_COL3		EP93XX_GPIO_LINE_D(3)
-#define EP93XX_GPIO_LINE_COL4		EP93XX_GPIO_LINE_D(4)
-#define EP93XX_GPIO_LINE_COL5		EP93XX_GPIO_LINE_D(5)
-#define EP93XX_GPIO_LINE_COL6		EP93XX_GPIO_LINE_D(6)
-#define EP93XX_GPIO_LINE_COL7		EP93XX_GPIO_LINE_D(7)
-
-/* GPIO port E.  */
-#define EP93XX_GPIO_LINE_E(x)		((x) + 32)
-#define EP93XX_GPIO_LINE_GRLED		EP93XX_GPIO_LINE_E(0)
-#define EP93XX_GPIO_LINE_RDLED		EP93XX_GPIO_LINE_E(1)
-#define EP93XX_GPIO_LINE_DIORn		EP93XX_GPIO_LINE_E(2)
-#define EP93XX_GPIO_LINE_IDECS1n	EP93XX_GPIO_LINE_E(3)
-#define EP93XX_GPIO_LINE_IDECS2n	EP93XX_GPIO_LINE_E(4)
-#define EP93XX_GPIO_LINE_IDEDA0		EP93XX_GPIO_LINE_E(5)
-#define EP93XX_GPIO_LINE_IDEDA1		EP93XX_GPIO_LINE_E(6)
-#define EP93XX_GPIO_LINE_IDEDA2		EP93XX_GPIO_LINE_E(7)
-
-/* GPIO port F.  */
-#define EP93XX_GPIO_LINE_F(x)		((x) + 16)
-#define EP93XX_GPIO_LINE_WP		EP93XX_GPIO_LINE_F(0)
-#define EP93XX_GPIO_LINE_MCCD1		EP93XX_GPIO_LINE_F(1)
-#define EP93XX_GPIO_LINE_MCCD2		EP93XX_GPIO_LINE_F(2)
-#define EP93XX_GPIO_LINE_MCBVD1		EP93XX_GPIO_LINE_F(3)
-#define EP93XX_GPIO_LINE_MCBVD2		EP93XX_GPIO_LINE_F(4)
-#define EP93XX_GPIO_LINE_VS1		EP93XX_GPIO_LINE_F(5)
-#define EP93XX_GPIO_LINE_READY		EP93XX_GPIO_LINE_F(6)
-#define EP93XX_GPIO_LINE_VS2		EP93XX_GPIO_LINE_F(7)
-
-/* GPIO port G.  */
-#define EP93XX_GPIO_LINE_G(x)		((x) + 48)
-#define EP93XX_GPIO_LINE_EECLK		EP93XX_GPIO_LINE_G(0)
-#define EP93XX_GPIO_LINE_EEDAT		EP93XX_GPIO_LINE_G(1)
-#define EP93XX_GPIO_LINE_SLA0		EP93XX_GPIO_LINE_G(2)
-#define EP93XX_GPIO_LINE_SLA1		EP93XX_GPIO_LINE_G(3)
-#define EP93XX_GPIO_LINE_DD12		EP93XX_GPIO_LINE_G(4)
-#define EP93XX_GPIO_LINE_DD13		EP93XX_GPIO_LINE_G(5)
-#define EP93XX_GPIO_LINE_DD14		EP93XX_GPIO_LINE_G(6)
-#define EP93XX_GPIO_LINE_DD15		EP93XX_GPIO_LINE_G(7)
-
-/* GPIO port H.  */
-#define EP93XX_GPIO_LINE_H(x)		((x) + 56)
-#define EP93XX_GPIO_LINE_DD0		EP93XX_GPIO_LINE_H(0)
-#define EP93XX_GPIO_LINE_DD1		EP93XX_GPIO_LINE_H(1)
-#define EP93XX_GPIO_LINE_DD2		EP93XX_GPIO_LINE_H(2)
-#define EP93XX_GPIO_LINE_DD3		EP93XX_GPIO_LINE_H(3)
-#define EP93XX_GPIO_LINE_DD4		EP93XX_GPIO_LINE_H(4)
-#define EP93XX_GPIO_LINE_DD5		EP93XX_GPIO_LINE_H(5)
-#define EP93XX_GPIO_LINE_DD6		EP93XX_GPIO_LINE_H(6)
-#define EP93XX_GPIO_LINE_DD7		EP93XX_GPIO_LINE_H(7)
-
-/* maximum value for gpio line identifiers */
-#define EP93XX_GPIO_LINE_MAX		EP93XX_GPIO_LINE_H(7)
-
-/* maximum value for irq capable line identifiers */
-#define EP93XX_GPIO_LINE_MAX_IRQ	EP93XX_GPIO_LINE_F(7)
-
-/* new generic GPIO API - see Documentation/gpio.txt */
-
-#include <asm-generic/gpio.h>
-
-#define gpio_get_value	__gpio_get_value
-#define gpio_set_value	__gpio_set_value
-#define gpio_cansleep	__gpio_cansleep
-
-/*
- * Map GPIO A0..A7  (0..7)  to irq 64..71,
- *          B0..B7  (7..15) to irq 72..79, and
- *          F0..F7 (16..24) to irq 80..87.
- */
-static inline int gpio_to_irq(unsigned gpio)
-{
-	if (gpio <= EP93XX_GPIO_LINE_MAX_IRQ)
-		return 64 + gpio;
-
-	return -EINVAL;
-}
-
-static inline int irq_to_gpio(unsigned irq)
-{
-	return irq - gpio_to_irq(0);
-}
-
-#endif
diff --git a/include/asm-arm/arch-ep93xx/hardware.h b/include/asm-arm/arch-ep93xx/hardware.h
deleted file mode 100644
index 9b69f454065d..000000000000
--- a/include/asm-arm/arch-ep93xx/hardware.h
+++ /dev/null
@@ -1,12 +0,0 @@
-/*
- * linux/include/asm-arm/arch-ep93xx/hardware.h
- */
-
-#include "ep93xx-regs.h"
-
-#define pcibios_assign_all_busses()	0
-
-#include "platform.h"
-
-#include "gesbc9312.h"
-#include "ts72xx.h"
diff --git a/include/asm-arm/arch-ep93xx/io.h b/include/asm-arm/arch-ep93xx/io.h
deleted file mode 100644
index 7b4d25e29060..000000000000
--- a/include/asm-arm/arch-ep93xx/io.h
+++ /dev/null
@@ -1,8 +0,0 @@
-/*
- * linux/include/asm-arm/arch-ep93xx/io.h
- */
-
-#define IO_SPACE_LIMIT		0xffffffff
-
-#define __io(p)			((void __iomem *)(p))
-#define __mem_pci(p)		(p)
diff --git a/include/asm-arm/arch-ep93xx/irqs.h b/include/asm-arm/arch-ep93xx/irqs.h
deleted file mode 100644
index 53d4a68bfc88..000000000000
--- a/include/asm-arm/arch-ep93xx/irqs.h
+++ /dev/null
@@ -1,78 +0,0 @@
-/*
- * linux/include/asm-arm/arch-ep93xx/irqs.h
- */
-
-#ifndef __ASM_ARCH_IRQS_H
-#define __ASM_ARCH_IRQS_H
-
-#define IRQ_EP93XX_COMMRX		2
-#define IRQ_EP93XX_COMMTX		3
-#define IRQ_EP93XX_TIMER1		4
-#define IRQ_EP93XX_TIMER2		5
-#define IRQ_EP93XX_AACINTR		6
-#define IRQ_EP93XX_DMAM2P0		7
-#define IRQ_EP93XX_DMAM2P1		8
-#define IRQ_EP93XX_DMAM2P2		9
-#define IRQ_EP93XX_DMAM2P3		10
-#define IRQ_EP93XX_DMAM2P4		11
-#define IRQ_EP93XX_DMAM2P5		12
-#define IRQ_EP93XX_DMAM2P6		13
-#define IRQ_EP93XX_DMAM2P7		14
-#define IRQ_EP93XX_DMAM2P8		15
-#define IRQ_EP93XX_DMAM2P9		16
-#define IRQ_EP93XX_DMAM2M0		17
-#define IRQ_EP93XX_DMAM2M1		18
-#define IRQ_EP93XX_GPIO0MUX		19
-#define IRQ_EP93XX_GPIO1MUX		20
-#define IRQ_EP93XX_GPIO2MUX		21
-#define IRQ_EP93XX_GPIO3MUX		22
-#define IRQ_EP93XX_UART1RX		23
-#define IRQ_EP93XX_UART1TX		24
-#define IRQ_EP93XX_UART2RX		25
-#define IRQ_EP93XX_UART2TX		26
-#define IRQ_EP93XX_UART3RX		27
-#define IRQ_EP93XX_UART3TX		28
-#define IRQ_EP93XX_KEY			29
-#define IRQ_EP93XX_TOUCH		30
-#define EP93XX_VIC1_VALID_IRQ_MASK	0x7ffffffc
-
-#define IRQ_EP93XX_EXT0			32
-#define IRQ_EP93XX_EXT1			33
-#define IRQ_EP93XX_EXT2			34
-#define IRQ_EP93XX_64HZ			35
-#define IRQ_EP93XX_WATCHDOG		36
-#define IRQ_EP93XX_RTC			37
-#define IRQ_EP93XX_IRDA			38
-#define IRQ_EP93XX_ETHERNET		39
-#define IRQ_EP93XX_EXT3			40
-#define IRQ_EP93XX_PROG			41
-#define IRQ_EP93XX_1HZ			42
-#define IRQ_EP93XX_VSYNC		43
-#define IRQ_EP93XX_VIDEO_FIFO		44
-#define IRQ_EP93XX_SSP1RX		45
-#define IRQ_EP93XX_SSP1TX		46
-#define IRQ_EP93XX_GPIO4MUX		47
-#define IRQ_EP93XX_GPIO5MUX		48
-#define IRQ_EP93XX_GPIO6MUX		49
-#define IRQ_EP93XX_GPIO7MUX		50
-#define IRQ_EP93XX_TIMER3		51
-#define IRQ_EP93XX_UART1		52
-#define IRQ_EP93XX_SSP			53
-#define IRQ_EP93XX_UART2		54
-#define IRQ_EP93XX_UART3		55
-#define IRQ_EP93XX_USB			56
-#define IRQ_EP93XX_ETHERNET_PME		57
-#define IRQ_EP93XX_DSP			58
-#define IRQ_EP93XX_GPIO_AB		59
-#define IRQ_EP93XX_SAI			60
-#define EP93XX_VIC2_VALID_IRQ_MASK	0x1fffffff
-
-#define NR_EP93XX_IRQS			(64 + 24)
-
-#define EP93XX_BOARD_IRQ(x)		(NR_EP93XX_IRQS + (x))
-#define EP93XX_BOARD_IRQS		32
-
-#define NR_IRQS				(NR_EP93XX_IRQS + EP93XX_BOARD_IRQS)
-
-
-#endif
diff --git a/include/asm-arm/arch-ep93xx/memory.h b/include/asm-arm/arch-ep93xx/memory.h
deleted file mode 100644
index 4b1a5c7c8363..000000000000
--- a/include/asm-arm/arch-ep93xx/memory.h
+++ /dev/null
@@ -1,14 +0,0 @@
-/*
- * linux/include/asm-arm/arch-ep93xx/memory.h
- */
-
-#ifndef __ASM_ARCH_MEMORY_H
-#define __ASM_ARCH_MEMORY_H
-
-#define PHYS_OFFSET		UL(0x00000000)
-
-#define __bus_to_virt(x)	__phys_to_virt(x)
-#define __virt_to_bus(x)	__virt_to_phys(x)
-
-
-#endif
diff --git a/include/asm-arm/arch-ep93xx/platform.h b/include/asm-arm/arch-ep93xx/platform.h
deleted file mode 100644
index 44eccec2cba4..000000000000
--- a/include/asm-arm/arch-ep93xx/platform.h
+++ /dev/null
@@ -1,20 +0,0 @@
-/*
- * linux/include/asm-arm/arch-ep93xx/platform.h
- */
-
-#ifndef __ASSEMBLY__
-
-void ep93xx_map_io(void);
-void ep93xx_init_irq(void);
-void ep93xx_init_time(unsigned long);
-void ep93xx_init_devices(void);
-extern struct sys_timer ep93xx_timer;
-
-struct ep93xx_eth_data
-{
-	unsigned char	dev_addr[6];
-	unsigned char	phy_id;
-};
-
-
-#endif
diff --git a/include/asm-arm/arch-ep93xx/system.h b/include/asm-arm/arch-ep93xx/system.h
deleted file mode 100644
index 79b718586746..000000000000
--- a/include/asm-arm/arch-ep93xx/system.h
+++ /dev/null
@@ -1,26 +0,0 @@
-/*
- * linux/include/asm-arm/arch-ep93xx/system.h
- */
-
-#include <asm/hardware.h>
-
-static inline void arch_idle(void)
-{
-	cpu_do_idle();
-}
-
-static inline void arch_reset(char mode)
-{
-	u32 devicecfg;
-
-	local_irq_disable();
-
-	devicecfg = __raw_readl(EP93XX_SYSCON_DEVICE_CONFIG);
-	__raw_writel(0xaa, EP93XX_SYSCON_SWLOCK);
-	__raw_writel(devicecfg | 0x80000000, EP93XX_SYSCON_DEVICE_CONFIG);
-	__raw_writel(0xaa, EP93XX_SYSCON_SWLOCK);
-	__raw_writel(devicecfg & ~0x80000000, EP93XX_SYSCON_DEVICE_CONFIG);
-
-	while (1)
-		;
-}
diff --git a/include/asm-arm/arch-ep93xx/timex.h b/include/asm-arm/arch-ep93xx/timex.h
deleted file mode 100644
index 4140bddc97e2..000000000000
--- a/include/asm-arm/arch-ep93xx/timex.h
+++ /dev/null
@@ -1,5 +0,0 @@
-/*
- * linux/include/asm-arm/arch-ep93xx/timex.h
- */
-
-#define CLOCK_TICK_RATE		983040
diff --git a/include/asm-arm/arch-ep93xx/uncompress.h b/include/asm-arm/arch-ep93xx/uncompress.h
deleted file mode 100644
index c15274c85d5d..000000000000
--- a/include/asm-arm/arch-ep93xx/uncompress.h
+++ /dev/null
@@ -1,85 +0,0 @@
-/*
- * linux/include/asm-arm/arch-ep93xx/uncompress.h
- *
- * Copyright (C) 2006 Lennert Buytenhek <buytenh@wantstofly.org>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or (at
- * your option) any later version.
- */
-
-#include <asm/arch/ep93xx-regs.h>
-
-static unsigned char __raw_readb(unsigned int ptr)
-{
-	return *((volatile unsigned char *)ptr);
-}
-
-static unsigned int __raw_readl(unsigned int ptr)
-{
-	return *((volatile unsigned int *)ptr);
-}
-
-static void __raw_writeb(unsigned char value, unsigned int ptr)
-{
-	*((volatile unsigned char *)ptr) = value;
-}
-
-static void __raw_writel(unsigned int value, unsigned int ptr)
-{
-	*((volatile unsigned int *)ptr) = value;
-}
-
-
-#define PHYS_UART1_DATA		0x808c0000
-#define PHYS_UART1_FLAG		0x808c0018
-#define UART1_FLAG_TXFF		0x20
-
-static inline void putc(int c)
-{
-	int i;
-
-	for (i = 0; i < 1000; i++) {
-		/* Transmit fifo not full?  */
-		if (!(__raw_readb(PHYS_UART1_FLAG) & UART1_FLAG_TXFF))
-			break;
-	}
-
-	__raw_writeb(c, PHYS_UART1_DATA);
-}
-
-static inline void flush(void)
-{
-}
-
-
-/*
- * Some bootloaders don't turn off DMA from the ethernet MAC before
- * jumping to linux, which means that we might end up with bits of RX
- * status and packet data scribbled over the uncompressed kernel image.
- * Work around this by resetting the ethernet MAC before we uncompress.
- */
-#define PHYS_ETH_SELF_CTL		0x80010020
-#define ETH_SELF_CTL_RESET		0x00000001
-
-static void ethernet_reset(void)
-{
-	unsigned int v;
-
-	/* Reset the ethernet MAC.  */
-	v = __raw_readl(PHYS_ETH_SELF_CTL);
-	__raw_writel(v | ETH_SELF_CTL_RESET, PHYS_ETH_SELF_CTL);
-
-	/* Wait for reset to finish.  */
-	while (__raw_readl(PHYS_ETH_SELF_CTL) & ETH_SELF_CTL_RESET)
-		;
-}
-
-
-static void arch_decomp_setup(void)
-{
-	ethernet_reset();
-}
-
-#define arch_decomp_wdog()
diff --git a/include/asm-arm/arch-ep93xx/vmalloc.h b/include/asm-arm/arch-ep93xx/vmalloc.h
deleted file mode 100644
index 205ea6b1cf5e..000000000000
--- a/include/asm-arm/arch-ep93xx/vmalloc.h
+++ /dev/null
@@ -1,5 +0,0 @@
-/*
- * linux/include/asm-arm/arch-ep93xx/vmalloc.h
- */
-
-#define VMALLOC_END	0xfe800000
diff --git a/include/asm-arm/arch-h720x/debug-macro.S b/include/asm-arm/arch-h720x/debug-macro.S
deleted file mode 100644
index 82822d362733..000000000000
--- a/include/asm-arm/arch-h720x/debug-macro.S
+++ /dev/null
@@ -1,40 +0,0 @@
-/* linux/include/asm-arm/arch-h720x/debug-macro.S
- *
- * Debugging macro include header
- *
- *  Copyright (C) 1994-1999 Russell King
- *  Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
-*/
-
-		.equ    io_virt, IO_BASE
-		.equ    io_phys, IO_START
-
-		.macro  addruart,rx
-		mrc     p15, 0, \rx, c1, c0
-		tst     \rx, #1  	       @ MMU enabled?
-		moveq   \rx, #io_phys	       @ physical base address
-		movne   \rx, #io_virt	       @ virtual address
-		add     \rx, \rx, #0x00020000   @ UART1
-		.endm
-
-		.macro  senduart,rd,rx
-		str     \rd, [\rx, #0x0]        @ UARTDR
-
-		.endm
-
-		.macro  waituart,rd,rx
-1001:		ldr     \rd, [\rx, #0x18]       @ UARTFLG
-		tst     \rd, #1 << 5	       @ UARTFLGUTXFF - 1 when full
-		bne     1001b
-		.endm
-
-		.macro  busyuart,rd,rx
-1001:		ldr     \rd, [\rx, #0x18]       @ UARTFLG
-		tst     \rd, #1 << 3	       @ UARTFLGUBUSY - 1 when busy
-		bne     1001b
-		.endm
diff --git a/include/asm-arm/arch-h720x/dma.h b/include/asm-arm/arch-h720x/dma.h
deleted file mode 100644
index bfc6636679f7..000000000000
--- a/include/asm-arm/arch-h720x/dma.h
+++ /dev/null
@@ -1,26 +0,0 @@
-/*
- * linux/include/asm-arm/arch-h720x/dma.h
- *
- * Architecture DMA routes
- *
- * Copyright (C) 1997.1998 Russell King
- */
-#ifndef __ASM_ARCH_DMA_H
-#define __ASM_ARCH_DMA_H
-
-/*
- * This is the maximum DMA address that can be DMAd to.
- * There should not be more than (0xd0000000 - 0xc0000000)
- * bytes of RAM.
- */
-#define MAX_DMA_ADDRESS		0xd0000000
-
-#if defined (CONFIG_CPU_H7201)
-#define MAX_DMA_CHANNELS	3
-#elif defined (CONFIG_CPU_H7202)
-#define MAX_DMA_CHANNELS	4
-#else
-#error processor definition missmatch
-#endif
-
-#endif /* __ASM_ARCH_DMA_H */
diff --git a/include/asm-arm/arch-h720x/entry-macro.S b/include/asm-arm/arch-h720x/entry-macro.S
deleted file mode 100644
index 38dd63ae104e..000000000000
--- a/include/asm-arm/arch-h720x/entry-macro.S
+++ /dev/null
@@ -1,66 +0,0 @@
-/*
- * include/asm-arm/arch-h720x/entry-macro.S
- *
- * Low-level IRQ helper macros for Hynix HMS720x based platforms
- *
- * This file is licensed under  the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-		.macro  disable_fiq
-		.endm
-
-		.macro  get_irqnr_preamble, base, tmp
-		.endm
-
-		.macro  arch_ret_to_user, tmp1, tmp2
-		.endm
-
-		.macro  get_irqnr_and_base, irqnr, irqstat, base, tmp
-#if defined (CONFIG_CPU_H7201) || defined (CONFIG_CPU_H7202)
-		@ we could use the id register on H7202, but this is not
-		@ properly updated when we come back from asm_do_irq
-		@ without a previous return from interrupt
-		@ (see loops below in irq_svc, irq_usr)
-		@ We see unmasked pending ints only, as the masked pending ints
-		@ are not visible here
-
-		mov     \base, #0xf0000000	       @ base register
-		orr     \base, \base, #0x24000	       @ irqbase
-		ldr     \irqstat, [\base, #0x04]        @ get interrupt status
-#if defined (CONFIG_CPU_H7201)
-		ldr	\tmp, =0x001fffff
-#else
-		mvn     \tmp, #0xc0000000
-#endif
-		and     \irqstat, \irqstat, \tmp        @ mask out unused ints
-		mov     \irqnr, #0
-
-		mov     \tmp, #0xff00
-		orr     \tmp, \tmp, #0xff
-		tst     \irqstat, \tmp
-		addeq   \irqnr, \irqnr, #16
-		moveq   \irqstat, \irqstat, lsr #16
-		tst     \irqstat, #255
-		addeq   \irqnr, \irqnr, #8
-		moveq   \irqstat, \irqstat, lsr #8
-		tst     \irqstat, #15
-		addeq   \irqnr, \irqnr, #4
-		moveq   \irqstat, \irqstat, lsr #4
-		tst     \irqstat, #3
-		addeq   \irqnr, \irqnr, #2
-		moveq   \irqstat, \irqstat, lsr #2
-		tst     \irqstat, #1
-		addeq   \irqnr, \irqnr, #1
-		moveq   \irqstat, \irqstat, lsr #1
-		tst     \irqstat, #1		       @ bit 0 should be set
-		.endm
-
-		.macro  irq_prio_table
-		.endm
-
-#else
-#error hynix processor selection missmatch
-#endif
-
diff --git a/include/asm-arm/arch-h720x/hardware.h b/include/asm-arm/arch-h720x/hardware.h
deleted file mode 100644
index dfb778906a9f..000000000000
--- a/include/asm-arm/arch-h720x/hardware.h
+++ /dev/null
@@ -1,192 +0,0 @@
-/*
- * linux/include/asm-arm/arch-h720x/hardware.h
- *
- * Copyright (C) 2000 Jungjun Kim, Hynix Semiconductor Inc.
- *           (C) 2003 Thomas Gleixner <tglx@linutronix.de>
- *           (C) 2003 Robert Schwebel <r.schwebel@pengutronix.de>
- *
- * This file contains the hardware definitions of the h720x processors
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * Do not add implementations specific defines here. This files contains
- * only defines of the onchip peripherals. Add those defines to boards.h,
- * which is included by this file.
- */
-
-#ifndef __ASM_ARCH_HARDWARE_H
-#define __ASM_ARCH_HARDWARE_H
-
-#define IOCLK (3686400L)
-
-/* Onchip peripherals */
-
-#define IO_VIRT			0xf0000000	/* IO peripherals */
-#define IO_PHYS			0x80000000
-#define IO_SIZE			0x00050000
-
-#ifdef CONFIG_CPU_H7202
-#include "h7202-regs.h"
-#elif defined CONFIG_CPU_H7201
-#include "h7201-regs.h"
-#else
-#error machine definition mismatch
-#endif
-
-/* Macro to access the CPU IO */
-#define CPU_IO(x) (*(volatile u32*)(x))
-
-/* Macro to access general purpose regs (base, offset) */
-#define CPU_REG(x,y) CPU_IO(x+y)
-
-/* Macro to access irq related regs */
-#define IRQ_REG(x) CPU_REG(IRQC_VIRT,x)
-
-/* CPU registers */
-/* general purpose I/O */
-#define GPIO_VIRT(x)		(IO_VIRT + 0x23000 + ((x)<<5))
-#define GPIO_A_VIRT		(GPIO_VIRT(0))
-#define GPIO_B_VIRT		(GPIO_VIRT(1))
-#define GPIO_C_VIRT		(GPIO_VIRT(2))
-#define GPIO_D_VIRT		(GPIO_VIRT(3))
-#define GPIO_E_VIRT		(GPIO_VIRT(4))
-#define GPIO_AMULSEL		(GPIO_VIRT(0) + 0xA4)
-
-#define AMULSEL_USIN2	(1<<5)
-#define AMULSEL_USOUT2	(1<<6)
-#define AMULSEL_USIN3	(1<<13)
-#define AMULSEL_USOUT3	(1<<14)
-#define AMULSEL_IRDIN	(1<<15)
-#define AMULSEL_IRDOUT	(1<<7)
-
-/* Register offsets general purpose I/O */
-#define GPIO_DATA		0x00
-#define GPIO_DIR		0x04
-#define GPIO_MASK		0x08
-#define GPIO_STAT		0x0C
-#define GPIO_EDGE		0x10
-#define GPIO_CLR		0x14
-#define GPIO_POL		0x18
-#define GPIO_EN			0x1C
-
-/*interrupt controller */
-#define IRQC_VIRT		(IO_VIRT + 0x24000)
-/* register offset interrupt controller */
-#define IRQC_IER		0x00
-#define IRQC_ISR		0x04
-
-/* timer unit */
-#define TIMER_VIRT		(IO_VIRT + 0x25000)
-/* Register offsets timer unit */
-#define TM0_PERIOD   		0x00
-#define TM0_COUNT    		0x08
-#define TM0_CTRL     		0x10
-#define TM1_PERIOD   		0x20
-#define TM1_COUNT    		0x28
-#define TM1_CTRL     		0x30
-#define TM2_PERIOD   		0x40
-#define TM2_COUNT    		0x48
-#define TM2_CTRL     		0x50
-#define TIMER_TOPCTRL		0x60
-#define TIMER_TOPSTAT		0x64
-#define T64_COUNTL		0x80
-#define T64_COUNTH		0x84
-#define T64_CTRL		0x88
-#define T64_BASEL		0x94
-#define T64_BASEH		0x98
-/* Bitmaks timer unit TOPSTAT reg */
-#define TSTAT_T0INT		0x1
-#define TSTAT_T1INT		0x2
-#define TSTAT_T2INT		0x4
-#define TSTAT_T3INT		0x8
-/* Bit description of TMx_CTRL register */
-#define TM_START  		0x1
-#define TM_REPEAT 		0x2
-#define TM_RESET  		0x4
-/* Bit description of TIMER_CTRL register */
-#define ENABLE_TM0_INTR  	0x1
-#define ENABLE_TM1_INTR  	0x2
-#define ENABLE_TM2_INTR  	0x4
-#define TIMER_ENABLE_BIT 	0x8
-#define ENABLE_TIMER64   	0x10
-#define ENABLE_TIMER64_INT	0x20
-
-/* PMU & PLL */
-#define PMU_BASE 		(IO_VIRT + 0x1000)
-#define PMU_MODE		0x00
-#define PMU_STAT   		0x20
-#define PMU_PLL_CTRL 		0x28
-
-/* PMU Mode bits */
-#define PMU_MODE_SLOW		0x00
-#define PMU_MODE_RUN		0x01
-#define PMU_MODE_IDLE		0x02
-#define PMU_MODE_SLEEP		0x03
-#define PMU_MODE_INIT		0x04
-#define PMU_MODE_DEEPSLEEP	0x07
-#define PMU_MODE_WAKEUP		0x08
-
-/* PMU ... */
-#define PLL_2_EN		0x8000
-#define PLL_1_EN		0x4000
-#define PLL_3_MUTE		0x0080
-
-/* Control bits for PMU/ PLL */
-#define PMU_WARMRESET		0x00010000
-#define PLL_CTRL_MASK23		0x000080ff
-
-/* LCD Controller */
-#define LCD_BASE 		(IO_VIRT + 0x10000)
-#define LCD_CTRL 		0x00
-#define LCD_STATUS		0x04
-#define LCD_STATUS_M		0x08
-#define LCD_INTERRUPT		0x0C
-#define LCD_DBAR		0x10
-#define LCD_DCAR		0x14
-#define LCD_TIMING0 		0x20
-#define LCD_TIMING1 		0x24
-#define LCD_TIMING2 		0x28
-#define LCD_TEST		0x40
-
-/* LCD Control Bits */
-#define LCD_CTRL_LCD_ENABLE   	0x00000001
-/* Bits per pixel */
-#define LCD_CTRL_LCD_BPP_MASK 	0x00000006
-#define LCD_CTRL_LCD_4BPP    	0x00000000
-#define LCD_CTRL_LCD_8BPP    	0x00000002
-#define LCD_CTRL_LCD_16BPP   	0x00000004
-#define LCD_CTRL_LCD_BW		0x00000008
-#define LCD_CTRL_LCD_TFT	0x00000010
-#define LCD_CTRL_BGR		0x00001000
-#define LCD_CTRL_LCD_VCOMP	0x00080000
-#define LCD_CTRL_LCD_MONO8	0x00200000
-#define LCD_CTRL_LCD_PWR	0x00400000
-#define LCD_CTRL_LCD_BLE	0x00800000
-#define LCD_CTRL_LDBUSEN	0x01000000
-
-/* Palette */
-#define LCD_PALETTE_BASE 	(IO_VIRT + 0x10400)
-
-/* Serial ports */
-#define SERIAL0_OFS		0x20000
-#define SERIAL0_VIRT 		(IO_VIRT + SERIAL0_OFS)
-#define SERIAL0_BASE		(IO_PHYS + SERIAL0_OFS)
-
-#define SERIAL1_OFS		0x21000
-#define SERIAL1_VIRT 		(IO_VIRT + SERIAL1_OFS)
-#define SERIAL1_BASE		(IO_PHYS + SERIAL1_OFS)
-
-#define SERIAL_ENABLE		0x30
-#define SERIAL_ENABLE_EN	(1<<0)
-
-/* General defines to pacify gcc */
-#define PCIO_BASE 		(0)	/* for inb, outb and friends */
-#define PCIO_VIRT		PCIO_BASE
-
-#define __ASM_ARCH_HARDWARE_INCMACH_H
-#include "boards.h"
-#undef __ASM_ARCH_HARDWARE_INCMACH_H
-
-#endif				/* __ASM_ARCH_HARDWARE_H */
diff --git a/include/asm-arm/arch-h720x/io.h b/include/asm-arm/arch-h720x/io.h
deleted file mode 100644
index d3ccfd8172b7..000000000000
--- a/include/asm-arm/arch-h720x/io.h
+++ /dev/null
@@ -1,24 +0,0 @@
-/*
- * linux/include/asm-arm/arch-h720x/io.h
- *
- * Copyright (C) 2000 Steve Hill (sjhill@cotw.com)
- *
- * Changelog:
- *
- *  09-19-2001	JJKIM
- *  		Created from linux/include/asm-arm/arch-l7200/io.h
- *
- *  03-27-2003  Robert Schwebel <r.schwebel@pengutronix.de>:
- *  		re-unified header files for h720x
- */
-#ifndef __ASM_ARM_ARCH_IO_H
-#define __ASM_ARM_ARCH_IO_H
-
-#include <asm/hardware.h>
-
-#define IO_SPACE_LIMIT 0xffffffff
-
-#define __io(a)		((void __iomem *)(a))
-#define __mem_pci(a)	(a)
-
-#endif
diff --git a/include/asm-arm/arch-h720x/irqs.h b/include/asm-arm/arch-h720x/irqs.h
deleted file mode 100644
index 8244413988be..000000000000
--- a/include/asm-arm/arch-h720x/irqs.h
+++ /dev/null
@@ -1,116 +0,0 @@
-/*
- * linux/include/asm-arm/arch-h720x/irqs.h
- *
- * Copyright (C) 2000 Jungjun Kim
- *           (C) 2003 Robert Schwebel <r.schwebel@pengutronix.de>
- *           (C) 2003 Thomas Gleixner <tglx@linutronix.de>
- *
- */
-
-#ifndef __ASM_ARCH_IRQS_H
-#define __ASM_ARCH_IRQS_H
-
-#if defined (CONFIG_CPU_H7201)
-
-#define IRQ_PMU		0		/* 0x000001 */
-#define IRQ_DMA		1 		/* 0x000002 */
-#define IRQ_LCD		2		/* 0x000004 */
-#define IRQ_VGA		3 		/* 0x000008 */
-#define IRQ_PCMCIA1 	4 		/* 0x000010 */
-#define IRQ_PCMCIA2 	5 		/* 0x000020 */
-#define IRQ_AFE		6 		/* 0x000040 */
-#define IRQ_AIC		7 		/* 0x000080 */
-#define IRQ_KEYBOARD 	8 		/* 0x000100 */
-#define IRQ_TIMER0	9 		/* 0x000200 */
-#define IRQ_RTC		10		/* 0x000400 */
-#define IRQ_SOUND	11		/* 0x000800 */
-#define IRQ_USB		12		/* 0x001000 */
-#define IRQ_IrDA 	13		/* 0x002000 */
-#define IRQ_UART0	14		/* 0x004000 */
-#define IRQ_UART1	15		/* 0x008000 */
-#define IRQ_SPI		16		/* 0x010000 */
-#define IRQ_GPIOA 	17		/* 0x020000 */
-#define IRQ_GPIOB	18		/* 0x040000 */
-#define IRQ_GPIOC	19		/* 0x080000 */
-#define IRQ_GPIOD	20		/* 0x100000 */
-#define IRQ_CommRX	21		/* 0x200000 */
-#define IRQ_CommTX	22		/* 0x400000 */
-#define IRQ_Soft	23		/* 0x800000 */
-
-#define NR_GLBL_IRQS	24
-
-#define IRQ_CHAINED_GPIOA(x)  (NR_GLBL_IRQS + x)
-#define IRQ_CHAINED_GPIOB(x)  (IRQ_CHAINED_GPIOA(32) + x)
-#define IRQ_CHAINED_GPIOC(x)  (IRQ_CHAINED_GPIOB(32) + x)
-#define IRQ_CHAINED_GPIOD(x)  (IRQ_CHAINED_GPIOC(32) + x)
-#define NR_IRQS               IRQ_CHAINED_GPIOD(32)
-
-/* Enable mask for multiplexed interrupts */
-#define IRQ_ENA_MUX	(1<<IRQ_GPIOA) | (1<<IRQ_GPIOB) \
-			| (1<<IRQ_GPIOC) | (1<<IRQ_GPIOD)
-
-
-#elif defined (CONFIG_CPU_H7202)
-
-#define IRQ_PMU		0		/* 0x00000001 */
-#define IRQ_DMA		1		/* 0x00000002 */
-#define IRQ_LCD		2		/* 0x00000004 */
-#define IRQ_SOUND	3		/* 0x00000008 */
-#define IRQ_I2S		4		/* 0x00000010 */
-#define IRQ_USB 	5		/* 0x00000020 */
-#define IRQ_MMC 	6		/* 0x00000040 */
-#define IRQ_RTC 	7		/* 0x00000080 */
-#define IRQ_UART0 	8		/* 0x00000100 */
-#define IRQ_UART1 	9		/* 0x00000200 */
-#define IRQ_UART2 	10		/* 0x00000400 */
-#define IRQ_UART3 	11		/* 0x00000800 */
-#define IRQ_KBD 	12		/* 0x00001000 */
-#define IRQ_PS2 	13		/* 0x00002000 */
-#define IRQ_AIC 	14		/* 0x00004000 */
-#define IRQ_TIMER0 	15		/* 0x00008000 */
-#define IRQ_TIMERX 	16		/* 0x00010000 */
-#define IRQ_WDT 	17		/* 0x00020000 */
-#define IRQ_CAN0 	18		/* 0x00040000 */
-#define IRQ_CAN1 	19		/* 0x00080000 */
-#define IRQ_EXT0 	20		/* 0x00100000 */
-#define IRQ_EXT1 	21		/* 0x00200000 */
-#define IRQ_GPIOA 	22		/* 0x00400000 */
-#define IRQ_GPIOB 	23		/* 0x00800000 */
-#define IRQ_GPIOC 	24		/* 0x01000000 */
-#define IRQ_GPIOD 	25		/* 0x02000000 */
-#define IRQ_GPIOE 	26		/* 0x04000000 */
-#define IRQ_COMMRX 	27		/* 0x08000000 */
-#define IRQ_COMMTX 	28		/* 0x10000000 */
-#define IRQ_SMC 	29		/* 0x20000000 */
-#define IRQ_Soft 	30		/* 0x40000000 */
-#define IRQ_RESERVED1 	31		/* 0x80000000 */
-#define NR_GLBL_IRQS	32
-
-#define NR_TIMERX_IRQS	3
-
-#define IRQ_CHAINED_GPIOA(x)  (NR_GLBL_IRQS + x)
-#define IRQ_CHAINED_GPIOB(x)  (IRQ_CHAINED_GPIOA(32) + x)
-#define IRQ_CHAINED_GPIOC(x)  (IRQ_CHAINED_GPIOB(32) + x)
-#define IRQ_CHAINED_GPIOD(x)  (IRQ_CHAINED_GPIOC(32) + x)
-#define IRQ_CHAINED_GPIOE(x)  (IRQ_CHAINED_GPIOD(32) + x)
-#define IRQ_CHAINED_TIMERX(x) (IRQ_CHAINED_GPIOE(32) + x)
-#define IRQ_TIMER1            (IRQ_CHAINED_TIMERX(0))
-#define IRQ_TIMER2            (IRQ_CHAINED_TIMERX(1))
-#define IRQ_TIMER64B          (IRQ_CHAINED_TIMERX(2))
-
-#define NR_IRQS		(IRQ_CHAINED_TIMERX(NR_TIMERX_IRQS))
-
-/* Enable mask for multiplexed interrupts */
-#define IRQ_ENA_MUX	(1<<IRQ_TIMERX) | (1<<IRQ_GPIOA) | (1<<IRQ_GPIOB) | \
-			(1<<IRQ_GPIOC) 	| (1<<IRQ_GPIOD) | (1<<IRQ_GPIOE) | \
-			(1<<IRQ_TIMERX)
-
-#else
-#error cpu definition mismatch
-#endif
-
-/* decode irq number to register number */
-#define IRQ_TO_REGNO(irq) ((irq - NR_GLBL_IRQS) >> 5)
-#define IRQ_TO_BIT(irq) (1 << ((irq - NR_GLBL_IRQS) % 32))
-
-#endif
diff --git a/include/asm-arm/arch-h720x/memory.h b/include/asm-arm/arch-h720x/memory.h
deleted file mode 100644
index 53e923dba76e..000000000000
--- a/include/asm-arm/arch-h720x/memory.h
+++ /dev/null
@@ -1,29 +0,0 @@
-/*
- * linux/include/asm-arm/arch-h720x/memory.h
- *
- * Copyright (c) 2000 Jungjun Kim
- *
- */
-#ifndef __ASM_ARCH_MEMORY_H
-#define __ASM_ARCH_MEMORY_H
-
-/*
- * Page offset:
- *    ( 0xc0000000UL )
- */
-#define PHYS_OFFSET	UL(0x40000000)
-
-/*
- * Virtual view <-> DMA view memory address translations
- * virt_to_bus: Used to translate the virtual address to an
- *              address suitable to be passed to set_dma_addr
- * bus_to_virt: Used to convert an address for DMA operations
- *              to an address that the kernel can use.
- *
- * There is something to do here later !, Mar 2000, Jungjun Kim
- */
-
-#define __virt_to_bus(x)	__virt_to_phys(x)
-#define __bus_to_virt(x)	__phys_to_virt(x)
-
-#endif
diff --git a/include/asm-arm/arch-h720x/system.h b/include/asm-arm/arch-h720x/system.h
deleted file mode 100644
index 8dc1460b2305..000000000000
--- a/include/asm-arm/arch-h720x/system.h
+++ /dev/null
@@ -1,33 +0,0 @@
-/*
- * linux/include/asm-arm/arch-h720x/system.h
- *
- * Copyright (C) 2001-2002 Jungjun Kim, Hynix Semiconductor Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- * linux/include/asm-arm/arch-h720x/system.h
- *
- */
-
-#ifndef __ASM_ARCH_SYSTEM_H
-#define __ASM_ARCH_SYSTEM_H
-#include <asm/hardware.h>
-
-static void arch_idle(void)
-{
-	CPU_REG (PMU_BASE, PMU_MODE) = PMU_MODE_IDLE;
-	nop();
-	nop();
-	CPU_REG (PMU_BASE, PMU_MODE) = PMU_MODE_RUN;
-	nop();
-	nop();
-}
-
-
-static __inline__ void arch_reset(char mode)
-{
-	CPU_REG (PMU_BASE, PMU_STAT) |= PMU_WARMRESET;
-}
-
-#endif
diff --git a/include/asm-arm/arch-h720x/timex.h b/include/asm-arm/arch-h720x/timex.h
deleted file mode 100644
index 48a391c4080f..000000000000
--- a/include/asm-arm/arch-h720x/timex.h
+++ /dev/null
@@ -1,15 +0,0 @@
-/*
- * linux/include/asm-arm/arch-h720x/timex.h
- * Copyright (C) 2000 Jungjun Kim, Hynix Semiconductor Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ASM_ARCH_TIMEX
-#define __ASM_ARCH_TIMEX
-
-#define CLOCK_TICK_RATE		3686400
-
-#endif
diff --git a/include/asm-arm/arch-h720x/uncompress.h b/include/asm-arm/arch-h720x/uncompress.h
deleted file mode 100644
index 18c69e0f3585..000000000000
--- a/include/asm-arm/arch-h720x/uncompress.h
+++ /dev/null
@@ -1,37 +0,0 @@
-/*
- * linux/include/asm-arm/arch-h720x/uncompress.h
- *
- * Copyright (C) 2001-2002 Jungjun Kim
- */
-
-#ifndef __ASM_ARCH_UNCOMPRESS_H
-#define __ASM_ARCH_UNCOMPRESS_H
-
-#include <asm/hardware.h>
-
-#define LSR 	0x14
-#define TEMPTY 	0x40
-
-static inline void putc(int c)
-{
-	volatile unsigned char *p = (volatile unsigned char *)(IO_PHYS+0x20000);
-
-	/* wait until transmit buffer is empty */
-	while((p[LSR] & TEMPTY) == 0x0)
-		barrier();
-
-	/* write next character */
-	*p = c;
-}
-
-static inline void flush(void)
-{
-}
-
-/*
- * nothing to do
- */
-#define arch_decomp_setup()
-#define arch_decomp_wdog()
-
-#endif
diff --git a/include/asm-arm/arch-h720x/vmalloc.h b/include/asm-arm/arch-h720x/vmalloc.h
deleted file mode 100644
index b4693cb821ef..000000000000
--- a/include/asm-arm/arch-h720x/vmalloc.h
+++ /dev/null
@@ -1,10 +0,0 @@
-/*
- * linux/include/asm-arm/arch-h720x/vmalloc.h
- */
-
-#ifndef __ARCH_ARM_VMALLOC_H
-#define __ARCH_ARM_VMALLOC_H
-
-#define VMALLOC_END       (PAGE_OFFSET + 0x10000000)
-
-#endif
diff --git a/include/asm-arm/arch-imx/debug-macro.S b/include/asm-arm/arch-imx/debug-macro.S
deleted file mode 100644
index c611871643a2..000000000000
--- a/include/asm-arm/arch-imx/debug-macro.S
+++ /dev/null
@@ -1,34 +0,0 @@
-/* linux/include/asm-arm/arch-imx/debug-macro.S
- *
- * Debugging macro include header
- *
- *  Copyright (C) 1994-1999 Russell King
- *  Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
-*/
-
-		.macro	addruart,rx
-		mrc	p15, 0, \rx, c1, c0
-		tst	\rx, #1			@ MMU enabled?
-		moveq	\rx, #0x00000000	@ physical
-		movne	\rx, #0xe0000000	@ virtual
-		orreq	\rx, \rx, #0x00200000	@ physical
-		orr	\rx, \rx, #0x00006000	@ UART1 offset
-		.endm
-
-		.macro	senduart,rd,rx
-		str	\rd, [\rx, #0x40]	@ TXDATA
-		.endm
-
-		.macro	waituart,rd,rx
-		.endm
-
-		.macro	busyuart,rd,rx
-1002:		ldr	\rd, [\rx, #0x98]	@ SR2
-		tst	\rd, #1 << 3		@ TXDC
-		beq	1002b			@ wait until transmit done
-		.endm
diff --git a/include/asm-arm/arch-imx/entry-macro.S b/include/asm-arm/arch-imx/entry-macro.S
deleted file mode 100644
index 0b84e81031c3..000000000000
--- a/include/asm-arm/arch-imx/entry-macro.S
+++ /dev/null
@@ -1,32 +0,0 @@
-/*
- * include/asm-arm/arch-imx/entry-macro.S
- *
- * Low-level IRQ helper macros for iMX-based platforms
- *
- * This file is licensed under  the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-#include <asm/hardware.h>
-
-		.macro	disable_fiq
-		.endm
-
-		.macro	get_irqnr_preamble, base, tmp
-		.endm
-
-		.macro	arch_ret_to_user, tmp1, tmp2
-		.endm
-
-#define AITC_NIVECSR   0x40
-		.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
-		ldr	\base, =IO_ADDRESS(IMX_AITC_BASE)
-		@ Load offset & priority of the highest priority
-		@ interrupt pending.
-		ldr	\irqstat, [\base, #AITC_NIVECSR]
-		@ Shift off the priority leaving the offset or
-		@ "interrupt number", use arithmetic shift to
-		@ transform illegal source (0xffff) as -1
-		mov	\irqnr, \irqstat, asr #16
-		adds	\tmp, \irqnr, #1
-		.endm
diff --git a/include/asm-arm/arch-imx/gpio.h b/include/asm-arm/arch-imx/gpio.h
deleted file mode 100644
index 486023263f32..000000000000
--- a/include/asm-arm/arch-imx/gpio.h
+++ /dev/null
@@ -1,102 +0,0 @@
-#ifndef _IMX_GPIO_H
-
-#include <asm/arch/imx-regs.h>
-
-#define IMX_GPIO_ALLOC_MODE_NORMAL	0
-#define IMX_GPIO_ALLOC_MODE_NO_ALLOC	1
-#define IMX_GPIO_ALLOC_MODE_TRY_ALLOC	2
-#define IMX_GPIO_ALLOC_MODE_ALLOC_ONLY	4
-#define IMX_GPIO_ALLOC_MODE_RELEASE	8
-
-extern int imx_gpio_request(unsigned gpio, const char *label);
-
-extern void imx_gpio_free(unsigned gpio);
-
-extern int imx_gpio_setup_multiple_pins(const int *pin_list, unsigned count,
-					int alloc_mode, const char *label);
-
-extern int imx_gpio_direction_input(unsigned gpio);
-
-extern int imx_gpio_direction_output(unsigned gpio, int value);
-
-extern void __imx_gpio_set_value(unsigned gpio, int value);
-
-static inline int imx_gpio_get_value(unsigned gpio)
-{
-	return SSR(gpio >> GPIO_PORT_SHIFT) & (1 << (gpio & GPIO_PIN_MASK));
-}
-
-static inline void imx_gpio_set_value_inline(unsigned gpio, int value)
-{
-	unsigned long flags;
-
-	raw_local_irq_save(flags);
-	if(value)
-		DR(gpio >> GPIO_PORT_SHIFT) |= (1 << (gpio & GPIO_PIN_MASK));
-	else
-		DR(gpio >> GPIO_PORT_SHIFT) &= ~(1 << (gpio & GPIO_PIN_MASK));
-	raw_local_irq_restore(flags);
-}
-
-static inline void imx_gpio_set_value(unsigned gpio, int value)
-{
-	if(__builtin_constant_p(gpio))
-		imx_gpio_set_value_inline(gpio, value);
-	else
-		__imx_gpio_set_value(gpio, value);
-}
-
-extern int imx_gpio_to_irq(unsigned gpio);
-
-extern int imx_irq_to_gpio(unsigned irq);
-
-/*-------------------------------------------------------------------------*/
-
-/* Wrappers for "new style" GPIO calls. These calls i.MX specific versions
- * to allow future extension of GPIO logic.
- */
-
-static inline int gpio_request(unsigned gpio, const char *label)
-{
-	return imx_gpio_request(gpio, label);
-}
-
-static inline void gpio_free(unsigned gpio)
-{
-	imx_gpio_free(gpio);
-}
-
-static inline  int gpio_direction_input(unsigned gpio)
-{
-	return imx_gpio_direction_input(gpio);
-}
-
-static inline int gpio_direction_output(unsigned gpio, int value)
-{
-	return imx_gpio_direction_output(gpio, value);
-}
-
-static inline int gpio_get_value(unsigned gpio)
-{
-	return imx_gpio_get_value(gpio);
-}
-
-static inline void gpio_set_value(unsigned gpio, int value)
-{
-	imx_gpio_set_value(gpio, value);
-}
-
-#include <asm-generic/gpio.h>		/* cansleep wrappers */
-
-static inline int gpio_to_irq(unsigned gpio)
-{
-	return imx_gpio_to_irq(gpio);
-}
-
-static inline int irq_to_gpio(unsigned irq)
-{
-	return imx_irq_to_gpio(irq);
-}
-
-
-#endif
diff --git a/include/asm-arm/arch-imx/hardware.h b/include/asm-arm/arch-imx/hardware.h
deleted file mode 100644
index 6542ca5e8c33..000000000000
--- a/include/asm-arm/arch-imx/hardware.h
+++ /dev/null
@@ -1,91 +0,0 @@
-/*
- *  linux/include/asm-arm/arch-imx/hardware.h
- *
- *  Copyright (C) 1999 ARM Limited.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-#ifndef __ASM_ARCH_HARDWARE_H
-#define __ASM_ARCH_HARDWARE_H
-
-#include <asm/sizes.h>
-#include "imx-regs.h"
-
-#ifndef __ASSEMBLY__
-# define __REG(x)	(*((volatile u32 *)IO_ADDRESS(x)))
-
-# define __REG2(x,y)        (*(volatile u32 *)((u32)&__REG(x) + (y)))
-#endif
-
-/*
- * Memory map
- */
-
-#define IMX_IO_PHYS		0x00200000
-#define IMX_IO_SIZE		0x00100000
-#define IMX_IO_BASE		0xe0000000
-
-#define IMX_CS0_PHYS		0x10000000
-#define IMX_CS0_SIZE		0x02000000
-#define IMX_CS0_VIRT		0xe8000000
-
-#define IMX_CS1_PHYS		0x12000000
-#define IMX_CS1_SIZE		0x01000000
-#define IMX_CS1_VIRT		0xea000000
-
-#define IMX_CS2_PHYS		0x13000000
-#define IMX_CS2_SIZE		0x01000000
-#define IMX_CS2_VIRT		0xeb000000
-
-#define IMX_CS3_PHYS		0x14000000
-#define IMX_CS3_SIZE		0x01000000
-#define IMX_CS3_VIRT		0xec000000
-
-#define IMX_CS4_PHYS		0x15000000
-#define IMX_CS4_SIZE		0x01000000
-#define IMX_CS4_VIRT		0xed000000
-
-#define IMX_CS5_PHYS		0x16000000
-#define IMX_CS5_SIZE		0x01000000
-#define IMX_CS5_VIRT		0xee000000
-
-#define IMX_FB_VIRT		0xF1000000
-#define IMX_FB_SIZE		(256*1024)
-
-/* macro to get at IO space when running virtually */
-#define IO_ADDRESS(x) ((x) | IMX_IO_BASE)
-
-#ifndef __ASSEMBLY__
-/*
- * Handy routine to set GPIO functions
- */
-extern void imx_gpio_mode( int gpio_mode );
-
-#endif
-
-#define MAXIRQNUM                       62
-#define MAXFIQNUM                       62
-#define MAXSWINUM                       62
-
-/*
- * Use SDRAM for memory
- */
-#define MEM_SIZE		0x01000000
-
-#ifdef CONFIG_ARCH_MX1ADS
-#include "mx1ads.h"
-#endif
-
-#endif
diff --git a/include/asm-arm/arch-imx/io.h b/include/asm-arm/arch-imx/io.h
deleted file mode 100644
index b191cdd05576..000000000000
--- a/include/asm-arm/arch-imx/io.h
+++ /dev/null
@@ -1,30 +0,0 @@
-/*
- *  linux/include/asm-arm/arch-imxads/io.h
- *
- *  Copyright (C) 1999 ARM Limited
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-#ifndef __ASM_ARM_ARCH_IO_H
-#define __ASM_ARM_ARCH_IO_H
-
-#include <asm/hardware.h>
-
-#define IO_SPACE_LIMIT 0xffffffff
-
-#define __io(a)		((void __iomem *)(a))
-#define __mem_pci(a)	(a)
-
-#endif
diff --git a/include/asm-arm/arch-imx/irqs.h b/include/asm-arm/arch-imx/irqs.h
deleted file mode 100644
index f195542898e0..000000000000
--- a/include/asm-arm/arch-imx/irqs.h
+++ /dev/null
@@ -1,116 +0,0 @@
-/*
- *  linux/include/asm-arm/arch-imxads/irqs.h
- *
- *  Copyright (C) 1999 ARM Limited
- *  Copyright (C) 2000 Deep Blue Solutions Ltd.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#ifndef __ARM_IRQS_H__
-#define __ARM_IRQS_H__
-
-/* Use the imx definitions */
-#include <asm/hardware.h>
-
-/*
- *  IMX Interrupt numbers
- *
- */
-#define INT_SOFTINT                 0
-#define CSI_INT                     6
-#define DSPA_MAC_INT                7
-#define DSPA_INT                    8
-#define COMP_INT                    9
-#define MSHC_XINT                   10
-#define GPIO_INT_PORTA              11
-#define GPIO_INT_PORTB              12
-#define GPIO_INT_PORTC              13
-#define LCDC_INT                    14
-#define SIM_INT                     15
-#define SIM_DATA_INT                16
-#define RTC_INT                     17
-#define RTC_SAMINT                  18
-#define UART2_MINT_PFERR            19
-#define UART2_MINT_RTS              20
-#define UART2_MINT_DTR              21
-#define UART2_MINT_UARTC            22
-#define UART2_MINT_TX               23
-#define UART2_MINT_RX               24
-#define UART1_MINT_PFERR            25
-#define UART1_MINT_RTS              26
-#define UART1_MINT_DTR              27
-#define UART1_MINT_UARTC            28
-#define UART1_MINT_TX               29
-#define UART1_MINT_RX               30
-#define VOICE_DAC_INT               31
-#define VOICE_ADC_INT               32
-#define PEN_DATA_INT                33
-#define PWM_INT                     34
-#define SDHC_INT                    35
-#define I2C_INT                     39
-#define CSPI_INT                    41
-#define SSI_TX_INT                  42
-#define SSI_TX_ERR_INT              43
-#define SSI_RX_INT                  44
-#define SSI_RX_ERR_INT              45
-#define TOUCH_INT                   46
-#define USBD_INT0                   47
-#define USBD_INT1                   48
-#define USBD_INT2                   49
-#define USBD_INT3                   50
-#define USBD_INT4                   51
-#define USBD_INT5                   52
-#define USBD_INT6                   53
-#define BTSYS_INT                   55
-#define BTTIM_INT                   56
-#define BTWUI_INT                   57
-#define TIM2_INT                    58
-#define TIM1_INT                    59
-#define DMA_ERR                     60
-#define DMA_INT                     61
-#define GPIO_INT_PORTD              62
-
-#define IMX_IRQS                         (64)
-
-/* note: the IMX has four gpio ports (A-D), but only
- *       the following pins are connected to the outside
- *       world:
- *
- * PORT A: bits 0-31
- * PORT B: bits 8-31
- * PORT C: bits 3-17
- * PORT D: bits 6-31
- *
- * We map these interrupts straight on. As a result we have
- * several holes in the interrupt mapping. We do this for two
- * reasons:
- *   - mapping the interrupts without holes would get
- *     far more complicated
- *   - Motorola could well decide to bring some processor
- *     with more pins connected
- */
-
-#define IRQ_GPIOA(x)  (IMX_IRQS + x)
-#define IRQ_GPIOB(x)  (IRQ_GPIOA(32) + x)
-#define IRQ_GPIOC(x)  (IRQ_GPIOB(32) + x)
-#define IRQ_GPIOD(x)  (IRQ_GPIOC(32) + x)
-
-/* decode irq number to use with IMR(x), ISR(x) and friends */
-#define IRQ_TO_REG(irq) ((irq - IMX_IRQS) >> 5)
-
-#define NR_IRQS (IRQ_GPIOD(32) + 1)
-#define IRQ_GPIO(x)
-#endif
diff --git a/include/asm-arm/arch-imx/memory.h b/include/asm-arm/arch-imx/memory.h
deleted file mode 100644
index 5ad90127915f..000000000000
--- a/include/asm-arm/arch-imx/memory.h
+++ /dev/null
@@ -1,36 +0,0 @@
-/*
- *  linux/include/asm-arm/arch-imx/memory.h
- *
- *  Copyright (C) 1999 ARM Limited
- *  Copyright (C) 2002 Shane Nay (shane@minirl.com)
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-#ifndef __ASM_ARCH_MMU_H
-#define __ASM_ARCH_MMU_H
-
-#define PHYS_OFFSET	UL(0x08000000)
-
-/*
- * Virtual view <-> DMA view memory address translations
- * virt_to_bus: Used to translate the virtual address to an
- *              address suitable to be passed to set_dma_addr
- * bus_to_virt: Used to convert an address for DMA operations
- *              to an address that the kernel can use.
- */
-#define __virt_to_bus(x)	(x - PAGE_OFFSET + PHYS_OFFSET)
-#define __bus_to_virt(x)	(x - PHYS_OFFSET + PAGE_OFFSET)
-
-#endif
diff --git a/include/asm-arm/arch-imx/system.h b/include/asm-arm/arch-imx/system.h
deleted file mode 100644
index c645fe9afb9d..000000000000
--- a/include/asm-arm/arch-imx/system.h
+++ /dev/null
@@ -1,40 +0,0 @@
-/*
- *  linux/include/asm-arm/arch-imxads/system.h
- *
- *  Copyright (C) 1999 ARM Limited
- *  Copyright (C) 2000 Deep Blue Solutions Ltd
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-#ifndef __ASM_ARCH_SYSTEM_H
-#define __ASM_ARCH_SYSTEM_H
-
-static void
-arch_idle(void)
-{
-	/*
-	 * This should do all the clock switching
-	 * and wait for interrupt tricks
-	 */
-	cpu_do_idle();
-}
-
-static inline void
-arch_reset(char mode)
-{
-	cpu_reset(0);
-}
-
-#endif
diff --git a/include/asm-arm/arch-imx/uncompress.h b/include/asm-arm/arch-imx/uncompress.h
deleted file mode 100644
index da333f69136f..000000000000
--- a/include/asm-arm/arch-imx/uncompress.h
+++ /dev/null
@@ -1,71 +0,0 @@
-/*
- *  linux/include/asm-arm/arch-imxads/uncompress.h
- *
- *
- *
- *  Copyright (C) 1999 ARM Limited
- *  Copyright (C) Shane Nay (shane@minirl.com)
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#define UART(x) (*(volatile unsigned long *)(serial_port + (x)))
-
-#define UART1_BASE 0x206000
-#define UART2_BASE 0x207000
-#define USR2 0x98
-#define USR2_TXFE (1<<14)
-#define TXR  0x40
-#define UCR1 0x80
-#define UCR1_UARTEN 1
-
-/*
- * The following code assumes the serial port has already been
- * initialized by the bootloader.  We search for the first enabled
- * port in the most probable order.  If you didn't setup a port in
- * your bootloader then nothing will appear (which might be desired).
- *
- * This does not append a newline
- */
-static void putc(int c)
-{
-	unsigned long serial_port;
-
-	do {
-		serial_port = UART1_BASE;
-		if ( UART(UCR1) & UCR1_UARTEN )
-			break;
-		serial_port = UART2_BASE;
-		if ( UART(UCR1) & UCR1_UARTEN )
-			break;
-		return;
-	} while(0);
-
-	while (!(UART(USR2) & USR2_TXFE))
-		barrier();
-
-	UART(TXR) = c;
-}
-
-static inline void flush(void)
-{
-}
-
-/*
- * nothing to do
- */
-#define arch_decomp_setup()
-
-#define arch_decomp_wdog()
diff --git a/include/asm-arm/arch-imx/vmalloc.h b/include/asm-arm/arch-imx/vmalloc.h
deleted file mode 100644
index cb6169127068..000000000000
--- a/include/asm-arm/arch-imx/vmalloc.h
+++ /dev/null
@@ -1,20 +0,0 @@
-/*
- *  linux/include/asm-arm/arch-imx/vmalloc.h
- *
- *  Copyright (C) 2000 Russell King.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-#define VMALLOC_END       (PAGE_OFFSET + 0x10000000)
diff --git a/include/asm-arm/arch-integrator/debug-macro.S b/include/asm-arm/arch-integrator/debug-macro.S
deleted file mode 100644
index 85b327c352df..000000000000
--- a/include/asm-arm/arch-integrator/debug-macro.S
+++ /dev/null
@@ -1,22 +0,0 @@
-/* linux/include/asm-arm/arch-integrator/debug-macro.S
- *
- * Debugging macro include header
- *
- *  Copyright (C) 1994-1999 Russell King
- *  Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
-*/
-
-		.macro	addruart,rx
-		mrc	p15, 0, \rx, c1, c0
-		tst	\rx, #1			@ MMU enabled?
-		moveq	\rx, #0x16000000	@ physical base address
-		movne	\rx, #0xf0000000	@ virtual base
-		addne	\rx, \rx, #0x16000000 >> 4
-		.endm
-
-#include <asm/hardware/debug-pl01x.S>
diff --git a/include/asm-arm/arch-integrator/dma.h b/include/asm-arm/arch-integrator/dma.h
deleted file mode 100644
index 83fd6bbaf9d3..000000000000
--- a/include/asm-arm/arch-integrator/dma.h
+++ /dev/null
@@ -1,19 +0,0 @@
-/*
- *  linux/include/asm-arm/arch-integrator/dma.h
- *
- *  Copyright (C) 1997,1998 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
diff --git a/include/asm-arm/arch-integrator/entry-macro.S b/include/asm-arm/arch-integrator/entry-macro.S
deleted file mode 100644
index 491af1a23de5..000000000000
--- a/include/asm-arm/arch-integrator/entry-macro.S
+++ /dev/null
@@ -1,44 +0,0 @@
-/*
- * include/asm-arm/arch-integrator/entry-macro.S
- *
- * Low-level IRQ helper macros for Integrator platforms
- *
- * This file is licensed under  the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-#include <asm/hardware.h>
-#include <asm/arch/irqs.h>
-
- 		.macro	disable_fiq
-		.endm
-
-		.macro  get_irqnr_preamble, base, tmp
-		.endm
-
-		.macro  arch_ret_to_user, tmp1, tmp2
-		.endm
-
-		.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
-/* FIXME: should not be using soo many LDRs here */
-		ldr	\base, =IO_ADDRESS(INTEGRATOR_IC_BASE)
-		mov	\irqnr, #IRQ_PIC_START
-		ldr	\irqstat, [\base, #IRQ_STATUS]		@ get masked status
-		ldr	\base, =IO_ADDRESS(INTEGRATOR_HDR_BASE)
-		teq	\irqstat, #0
-		ldreq	\irqstat, [\base, #(INTEGRATOR_HDR_IC_OFFSET+IRQ_STATUS)]
-		moveq	\irqnr, #IRQ_CIC_START
-
-1001:		tst	\irqstat, #15
-		bne	1002f
-		add	\irqnr, \irqnr, #4
-		movs	\irqstat, \irqstat, lsr #4
-		bne	1001b
-1002:		tst	\irqstat, #1
-		bne	1003f
-		add	\irqnr, \irqnr, #1
-		movs	\irqstat, \irqstat, lsr #1
-		bne	1002b
-1003:		/* EQ will be set if no irqs pending */
-		.endm
-
diff --git a/include/asm-arm/arch-integrator/hardware.h b/include/asm-arm/arch-integrator/hardware.h
deleted file mode 100644
index 6f0947bc500d..000000000000
--- a/include/asm-arm/arch-integrator/hardware.h
+++ /dev/null
@@ -1,48 +0,0 @@
-/*
- *  linux/include/asm-arm/arch-integrator/hardware.h
- *
- *  This file contains the hardware definitions of the Integrator.
- *
- *  Copyright (C) 1999 ARM Limited.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-#ifndef __ASM_ARCH_HARDWARE_H
-#define __ASM_ARCH_HARDWARE_H
-
-#include <asm/sizes.h>
-#include <asm/arch/platform.h>
-
-/*
- * Where in virtual memory the IO devices (timers, system controllers
- * and so on)
- */
-#define IO_BASE			0xF0000000                 // VA of IO 
-#define IO_SIZE			0x0B000000                 // How much?
-#define IO_START		INTEGRATOR_HDR_BASE        // PA of IO
-
-#define PCIO_BASE		PCI_IO_VADDR
-#define PCIMEM_BASE		PCI_MEMORY_VADDR
-
-/* macro to get at IO space when running virtually */
-#define IO_ADDRESS(x) (((x) >> 4) + IO_BASE) 
-
-#define pcibios_assign_all_busses()	1
-
-#define PCIBIOS_MIN_IO		0x6000
-#define PCIBIOS_MIN_MEM 	0x00100000
-
-#endif
-
diff --git a/include/asm-arm/arch-integrator/io.h b/include/asm-arm/arch-integrator/io.h
deleted file mode 100644
index c8f2175948bd..000000000000
--- a/include/asm-arm/arch-integrator/io.h
+++ /dev/null
@@ -1,36 +0,0 @@
-/*
- *  linux/include/asm-arm/arch-integrator/io.h
- *
- *  Copyright (C) 1999 ARM Limited
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-#ifndef __ASM_ARM_ARCH_IO_H
-#define __ASM_ARM_ARCH_IO_H
-
-#define IO_SPACE_LIMIT 0xffff
-
-/*
- * WARNING: this has to mirror definitions in platform.h
- */
-#define PCI_MEMORY_VADDR        0xe8000000
-#define PCI_CONFIG_VADDR        0xec000000
-#define PCI_V3_VADDR            0xed000000
-#define PCI_IO_VADDR            0xee000000
-
-#define __io(a)			((void __iomem *)(PCI_IO_VADDR + (a)))
-#define __mem_pci(a)		(a)
-
-#endif
diff --git a/include/asm-arm/arch-integrator/irqs.h b/include/asm-arm/arch-integrator/irqs.h
deleted file mode 100644
index ba7b3afee445..000000000000
--- a/include/asm-arm/arch-integrator/irqs.h
+++ /dev/null
@@ -1,82 +0,0 @@
-/*
- *  linux/include/asm-arm/arch-integrator/irqs.h
- *
- *  Copyright (C) 1999 ARM Limited
- *  Copyright (C) 2000 Deep Blue Solutions Ltd.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-/* 
- *  Interrupt numbers
- */
-#define IRQ_PIC_START			0
-#define IRQ_SOFTINT			0
-#define IRQ_UARTINT0			1
-#define IRQ_UARTINT1			2
-#define IRQ_KMIINT0			3
-#define IRQ_KMIINT1			4
-#define IRQ_TIMERINT0			5
-#define IRQ_TIMERINT1			6
-#define IRQ_TIMERINT2			7
-#define IRQ_RTCINT			8
-#define IRQ_AP_EXPINT0			9
-#define IRQ_AP_EXPINT1			10
-#define IRQ_AP_EXPINT2			11
-#define IRQ_AP_EXPINT3			12
-#define IRQ_AP_PCIINT0			13
-#define IRQ_AP_PCIINT1			14
-#define IRQ_AP_PCIINT2			15
-#define IRQ_AP_PCIINT3			16
-#define IRQ_AP_V3INT			17
-#define IRQ_AP_CPINT0			18
-#define IRQ_AP_CPINT1			19
-#define IRQ_AP_LBUSTIMEOUT 		20
-#define IRQ_AP_APCINT			21
-#define IRQ_CP_CLCDCINT			22
-#define IRQ_CP_MMCIINT0			23
-#define IRQ_CP_MMCIINT1			24
-#define IRQ_CP_AACIINT			25
-#define IRQ_CP_CPPLDINT			26
-#define IRQ_CP_ETHINT			27
-#define IRQ_CP_TSPENINT			28
-#define IRQ_PIC_END			31
-
-#define IRQ_CIC_START			32
-#define IRQ_CM_SOFTINT			32
-#define IRQ_CM_COMMRX			33
-#define IRQ_CM_COMMTX			34
-#define IRQ_CIC_END			34
-
-/*
- * IntegratorCP only
- */
-#define IRQ_SIC_START			35
-#define IRQ_SIC_CP_SOFTINT		35
-#define IRQ_SIC_CP_RI0			36
-#define IRQ_SIC_CP_RI1			37
-#define IRQ_SIC_CP_CARDIN		38
-#define IRQ_SIC_CP_LMINT0		39
-#define IRQ_SIC_CP_LMINT1		40
-#define IRQ_SIC_CP_LMINT2		41
-#define IRQ_SIC_CP_LMINT3		42
-#define IRQ_SIC_CP_LMINT4		43
-#define IRQ_SIC_CP_LMINT5		44
-#define IRQ_SIC_CP_LMINT6		45
-#define IRQ_SIC_CP_LMINT7		46
-#define IRQ_SIC_END			46
-
-#define NR_IRQS                         47
-
diff --git a/include/asm-arm/arch-integrator/memory.h b/include/asm-arm/arch-integrator/memory.h
deleted file mode 100644
index 1ab56d783e7c..000000000000
--- a/include/asm-arm/arch-integrator/memory.h
+++ /dev/null
@@ -1,39 +0,0 @@
-/*
- *  linux/include/asm-arm/arch-integrator/memory.h
- *
- *  Copyright (C) 1999 ARM Limited
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-#ifndef __ASM_ARCH_MEMORY_H
-#define __ASM_ARCH_MEMORY_H
-
-/*
- * Physical DRAM offset.
- */
-#define PHYS_OFFSET	UL(0x00000000)
-#define BUS_OFFSET	UL(0x80000000)
-
-/*
- * Virtual view <-> DMA view memory address translations
- * virt_to_bus: Used to translate the virtual address to an
- *              address suitable to be passed to set_dma_addr
- * bus_to_virt: Used to convert an address for DMA operations
- *              to an address that the kernel can use.
- */
-#define __virt_to_bus(x)	(x - PAGE_OFFSET + BUS_OFFSET)
-#define __bus_to_virt(x)	(x - BUS_OFFSET + PAGE_OFFSET)
-
-#endif
diff --git a/include/asm-arm/arch-integrator/platform.h b/include/asm-arm/arch-integrator/platform.h
deleted file mode 100644
index 83c4c1ceb411..000000000000
--- a/include/asm-arm/arch-integrator/platform.h
+++ /dev/null
@@ -1,469 +0,0 @@
-/*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-/* DO NOT EDIT!! - this file automatically generated
- *                 from .s file by awk -f s2h.awk
- */
-/**************************************************************************
- * * Copyright © ARM Limited 1998.  All rights reserved.
- * ***********************************************************************/
-/* ************************************************************************
- *
- *   Integrator address map
- *
- * 	NOTE: This is a multi-hosted header file for use with uHAL and
- * 	      supported debuggers.
- *
- * 	$Id: platform.s,v 1.32 2000/02/18 10:51:39 asims Exp $
- *
- * ***********************************************************************/
-
-#ifndef __address_h
-#define __address_h                     1
-
-/* ========================================================================
- *  Integrator definitions
- * ========================================================================
- * ------------------------------------------------------------------------
- *  Memory definitions
- * ------------------------------------------------------------------------
- *  Integrator memory map
- *
- */
-#define INTEGRATOR_BOOT_ROM_LO          0x00000000
-#define INTEGRATOR_BOOT_ROM_HI          0x20000000
-#define INTEGRATOR_BOOT_ROM_BASE        INTEGRATOR_BOOT_ROM_HI	 /*  Normal position */
-#define INTEGRATOR_BOOT_ROM_SIZE        SZ_512K
-
-/*
- *  New Core Modules have different amounts of SSRAM, the amount of SSRAM
- *  fitted can be found in HDR_STAT.
- *
- *  The symbol INTEGRATOR_SSRAM_SIZE is kept, however this now refers to
- *  the minimum amount of SSRAM fitted on any core module.
- *
- *  New Core Modules also alias the SSRAM.
- *
- */
-#define INTEGRATOR_SSRAM_BASE           0x00000000
-#define INTEGRATOR_SSRAM_ALIAS_BASE     0x10800000
-#define INTEGRATOR_SSRAM_SIZE           SZ_256K
-
-#define INTEGRATOR_FLASH_BASE           0x24000000
-#define INTEGRATOR_FLASH_SIZE           SZ_32M
-
-#define INTEGRATOR_MBRD_SSRAM_BASE      0x28000000
-#define INTEGRATOR_MBRD_SSRAM_SIZE      SZ_512K
-
-/*
- *  SDRAM is a SIMM therefore the size is not known.
- *
- */
-#define INTEGRATOR_SDRAM_BASE           0x00040000
-
-#define INTEGRATOR_SDRAM_ALIAS_BASE     0x80000000
-#define INTEGRATOR_HDR0_SDRAM_BASE      0x80000000
-#define INTEGRATOR_HDR1_SDRAM_BASE      0x90000000
-#define INTEGRATOR_HDR2_SDRAM_BASE      0xA0000000
-#define INTEGRATOR_HDR3_SDRAM_BASE      0xB0000000
-
-/*
- *  Logic expansion modules
- *
- */
-#define INTEGRATOR_LOGIC_MODULES_BASE   0xC0000000
-#define INTEGRATOR_LOGIC_MODULE0_BASE   0xC0000000
-#define INTEGRATOR_LOGIC_MODULE1_BASE   0xD0000000
-#define INTEGRATOR_LOGIC_MODULE2_BASE   0xE0000000
-#define INTEGRATOR_LOGIC_MODULE3_BASE   0xF0000000
-
-/* ------------------------------------------------------------------------
- *  Integrator header card registers
- * ------------------------------------------------------------------------
- *
- */
-#define INTEGRATOR_HDR_ID_OFFSET        0x00
-#define INTEGRATOR_HDR_PROC_OFFSET      0x04
-#define INTEGRATOR_HDR_OSC_OFFSET       0x08
-#define INTEGRATOR_HDR_CTRL_OFFSET      0x0C
-#define INTEGRATOR_HDR_STAT_OFFSET      0x10
-#define INTEGRATOR_HDR_LOCK_OFFSET      0x14
-#define INTEGRATOR_HDR_SDRAM_OFFSET     0x20
-#define INTEGRATOR_HDR_INIT_OFFSET      0x24	 /*  CM9x6 */
-#define INTEGRATOR_HDR_IC_OFFSET        0x40
-#define INTEGRATOR_HDR_SPDBASE_OFFSET   0x100
-#define INTEGRATOR_HDR_SPDTOP_OFFSET    0x200
-
-#define INTEGRATOR_HDR_BASE             0x10000000
-#define INTEGRATOR_HDR_ID               (INTEGRATOR_HDR_BASE + INTEGRATOR_HDR_ID_OFFSET)
-#define INTEGRATOR_HDR_PROC             (INTEGRATOR_HDR_BASE + INTEGRATOR_HDR_PROC_OFFSET)
-#define INTEGRATOR_HDR_OSC              (INTEGRATOR_HDR_BASE + INTEGRATOR_HDR_OSC_OFFSET)
-#define INTEGRATOR_HDR_CTRL             (INTEGRATOR_HDR_BASE + INTEGRATOR_HDR_CTRL_OFFSET)
-#define INTEGRATOR_HDR_STAT             (INTEGRATOR_HDR_BASE + INTEGRATOR_HDR_STAT_OFFSET)
-#define INTEGRATOR_HDR_LOCK             (INTEGRATOR_HDR_BASE + INTEGRATOR_HDR_LOCK_OFFSET)
-#define INTEGRATOR_HDR_SDRAM            (INTEGRATOR_HDR_BASE + INTEGRATOR_HDR_SDRAM_OFFSET)
-#define INTEGRATOR_HDR_INIT             (INTEGRATOR_HDR_BASE + INTEGRATOR_HDR_INIT_OFFSET)
-#define INTEGRATOR_HDR_IC               (INTEGRATOR_HDR_BASE + INTEGRATOR_HDR_IC_OFFSET)
-#define INTEGRATOR_HDR_SPDBASE          (INTEGRATOR_HDR_BASE + INTEGRATOR_HDR_SPDBASE_OFFSET)
-#define INTEGRATOR_HDR_SPDTOP           (INTEGRATOR_HDR_BASE + INTEGRATOR_HDR_SPDTOP_OFFSET)
-
-#define INTEGRATOR_HDR_CTRL_LED         0x01
-#define INTEGRATOR_HDR_CTRL_MBRD_DETECH 0x02
-#define INTEGRATOR_HDR_CTRL_REMAP       0x04
-#define INTEGRATOR_HDR_CTRL_RESET       0x08
-#define INTEGRATOR_HDR_CTRL_HIGHVECTORS 0x10
-#define INTEGRATOR_HDR_CTRL_BIG_ENDIAN  0x20
-#define INTEGRATOR_HDR_CTRL_FASTBUS     0x40
-#define INTEGRATOR_HDR_CTRL_SYNC        0x80
-
-#define INTEGRATOR_HDR_OSC_CORE_10MHz   0x102
-#define INTEGRATOR_HDR_OSC_CORE_15MHz   0x107
-#define INTEGRATOR_HDR_OSC_CORE_20MHz   0x10C
-#define INTEGRATOR_HDR_OSC_CORE_25MHz   0x111
-#define INTEGRATOR_HDR_OSC_CORE_30MHz   0x116
-#define INTEGRATOR_HDR_OSC_CORE_35MHz   0x11B
-#define INTEGRATOR_HDR_OSC_CORE_40MHz   0x120
-#define INTEGRATOR_HDR_OSC_CORE_45MHz   0x125
-#define INTEGRATOR_HDR_OSC_CORE_50MHz   0x12A
-#define INTEGRATOR_HDR_OSC_CORE_55MHz   0x12F
-#define INTEGRATOR_HDR_OSC_CORE_60MHz   0x134
-#define INTEGRATOR_HDR_OSC_CORE_65MHz   0x139
-#define INTEGRATOR_HDR_OSC_CORE_70MHz   0x13E
-#define INTEGRATOR_HDR_OSC_CORE_75MHz   0x143
-#define INTEGRATOR_HDR_OSC_CORE_80MHz   0x148
-#define INTEGRATOR_HDR_OSC_CORE_85MHz   0x14D
-#define INTEGRATOR_HDR_OSC_CORE_90MHz   0x152
-#define INTEGRATOR_HDR_OSC_CORE_95MHz   0x157
-#define INTEGRATOR_HDR_OSC_CORE_100MHz  0x15C
-#define INTEGRATOR_HDR_OSC_CORE_105MHz  0x161
-#define INTEGRATOR_HDR_OSC_CORE_110MHz  0x166
-#define INTEGRATOR_HDR_OSC_CORE_115MHz  0x16B
-#define INTEGRATOR_HDR_OSC_CORE_120MHz  0x170
-#define INTEGRATOR_HDR_OSC_CORE_125MHz  0x175
-#define INTEGRATOR_HDR_OSC_CORE_130MHz  0x17A
-#define INTEGRATOR_HDR_OSC_CORE_135MHz  0x17F
-#define INTEGRATOR_HDR_OSC_CORE_140MHz  0x184
-#define INTEGRATOR_HDR_OSC_CORE_145MHz  0x189
-#define INTEGRATOR_HDR_OSC_CORE_150MHz  0x18E
-#define INTEGRATOR_HDR_OSC_CORE_155MHz  0x193
-#define INTEGRATOR_HDR_OSC_CORE_160MHz  0x198
-#define INTEGRATOR_HDR_OSC_CORE_MASK    0x7FF
-
-#define INTEGRATOR_HDR_OSC_MEM_10MHz    0x10C000
-#define INTEGRATOR_HDR_OSC_MEM_15MHz    0x116000
-#define INTEGRATOR_HDR_OSC_MEM_20MHz    0x120000
-#define INTEGRATOR_HDR_OSC_MEM_25MHz    0x12A000
-#define INTEGRATOR_HDR_OSC_MEM_30MHz    0x134000
-#define INTEGRATOR_HDR_OSC_MEM_33MHz    0x13A000
-#define INTEGRATOR_HDR_OSC_MEM_40MHz    0x148000
-#define INTEGRATOR_HDR_OSC_MEM_50MHz    0x15C000
-#define INTEGRATOR_HDR_OSC_MEM_60MHz    0x170000
-#define INTEGRATOR_HDR_OSC_MEM_66MHz    0x17C000
-#define INTEGRATOR_HDR_OSC_MEM_MASK     0x7FF000
-
-#define INTEGRATOR_HDR_OSC_BUS_MODE_CM7x0  0x0
-#define INTEGRATOR_HDR_OSC_BUS_MODE_CM9x0  0x0800000
-#define INTEGRATOR_HDR_OSC_BUS_MODE_CM9x6  0x1000000
-#define INTEGRATOR_HDR_OSC_BUS_MODE_CM10x00  0x1800000
-#define INTEGRATOR_HDR_OSC_BUS_MODE_MASK  0x1800000
-
-#define INTEGRATOR_HDR_SDRAM_SPD_OK     (1 << 5)
-
-
-/* ------------------------------------------------------------------------
- *  Integrator system registers
- * ------------------------------------------------------------------------
- *
- */
-
-/*
- *  System Controller
- *
- */
-#define INTEGRATOR_SC_ID_OFFSET         0x00
-#define INTEGRATOR_SC_OSC_OFFSET        0x04
-#define INTEGRATOR_SC_CTRLS_OFFSET      0x08
-#define INTEGRATOR_SC_CTRLC_OFFSET      0x0C
-#define INTEGRATOR_SC_DEC_OFFSET        0x10
-#define INTEGRATOR_SC_ARB_OFFSET        0x14
-#define INTEGRATOR_SC_PCIENABLE_OFFSET  0x18
-#define INTEGRATOR_SC_LOCK_OFFSET       0x1C
-
-#define INTEGRATOR_SC_BASE              0x11000000
-#define INTEGRATOR_SC_ID                (INTEGRATOR_SC_BASE + INTEGRATOR_SC_ID_OFFSET)
-#define INTEGRATOR_SC_OSC               (INTEGRATOR_SC_BASE + INTEGRATOR_SC_OSC_OFFSET)
-#define INTEGRATOR_SC_CTRLS             (INTEGRATOR_SC_BASE + INTEGRATOR_SC_CTRLS_OFFSET)
-#define INTEGRATOR_SC_CTRLC             (INTEGRATOR_SC_BASE + INTEGRATOR_SC_CTRLC_OFFSET)
-#define INTEGRATOR_SC_DEC               (INTEGRATOR_SC_BASE + INTEGRATOR_SC_DEC_OFFSET)
-#define INTEGRATOR_SC_ARB               (INTEGRATOR_SC_BASE + INTEGRATOR_SC_ARB_OFFSET)
-#define INTEGRATOR_SC_PCIENABLE         (INTEGRATOR_SC_BASE + INTEGRATOR_SC_PCIENABLE_OFFSET)
-#define INTEGRATOR_SC_LOCK              (INTEGRATOR_SC_BASE + INTEGRATOR_SC_LOCK_OFFSET)
-
-#define INTEGRATOR_SC_OSC_SYS_10MHz     0x20
-#define INTEGRATOR_SC_OSC_SYS_15MHz     0x34
-#define INTEGRATOR_SC_OSC_SYS_20MHz     0x48
-#define INTEGRATOR_SC_OSC_SYS_25MHz     0x5C
-#define INTEGRATOR_SC_OSC_SYS_33MHz     0x7C
-#define INTEGRATOR_SC_OSC_SYS_MASK      0xFF
-
-#define INTEGRATOR_SC_OSC_PCI_25MHz     0x100
-#define INTEGRATOR_SC_OSC_PCI_33MHz     0x0
-#define INTEGRATOR_SC_OSC_PCI_MASK      0x100
-
-#define INTEGRATOR_SC_CTRL_SOFTRST      (1 << 0)
-#define INTEGRATOR_SC_CTRL_nFLVPPEN     (1 << 1)
-#define INTEGRATOR_SC_CTRL_nFLWP        (1 << 2)
-#define INTEGRATOR_SC_CTRL_URTS0        (1 << 4)
-#define INTEGRATOR_SC_CTRL_UDTR0        (1 << 5)
-#define INTEGRATOR_SC_CTRL_URTS1        (1 << 6)
-#define INTEGRATOR_SC_CTRL_UDTR1        (1 << 7)
-
-/*
- *  External Bus Interface
- *
- */
-#define INTEGRATOR_EBI_BASE             0x12000000
-
-#define INTEGRATOR_EBI_CSR0_OFFSET      0x00
-#define INTEGRATOR_EBI_CSR1_OFFSET      0x04
-#define INTEGRATOR_EBI_CSR2_OFFSET      0x08
-#define INTEGRATOR_EBI_CSR3_OFFSET      0x0C
-#define INTEGRATOR_EBI_LOCK_OFFSET      0x20
-
-#define INTEGRATOR_EBI_CSR0             (INTEGRATOR_EBI_BASE + INTEGRATOR_EBI_CSR0_OFFSET)
-#define INTEGRATOR_EBI_CSR1             (INTEGRATOR_EBI_BASE + INTEGRATOR_EBI_CSR1_OFFSET)
-#define INTEGRATOR_EBI_CSR2             (INTEGRATOR_EBI_BASE + INTEGRATOR_EBI_CSR2_OFFSET)
-#define INTEGRATOR_EBI_CSR3             (INTEGRATOR_EBI_BASE + INTEGRATOR_EBI_CSR3_OFFSET)
-#define INTEGRATOR_EBI_LOCK             (INTEGRATOR_EBI_BASE + INTEGRATOR_EBI_LOCK_OFFSET)
-
-#define INTEGRATOR_EBI_8_BIT            0x00
-#define INTEGRATOR_EBI_16_BIT           0x01
-#define INTEGRATOR_EBI_32_BIT           0x02
-#define INTEGRATOR_EBI_WRITE_ENABLE     0x04
-#define INTEGRATOR_EBI_SYNC             0x08
-#define INTEGRATOR_EBI_WS_2             0x00
-#define INTEGRATOR_EBI_WS_3             0x10
-#define INTEGRATOR_EBI_WS_4             0x20
-#define INTEGRATOR_EBI_WS_5             0x30
-#define INTEGRATOR_EBI_WS_6             0x40
-#define INTEGRATOR_EBI_WS_7             0x50
-#define INTEGRATOR_EBI_WS_8             0x60
-#define INTEGRATOR_EBI_WS_9             0x70
-#define INTEGRATOR_EBI_WS_10            0x80
-#define INTEGRATOR_EBI_WS_11            0x90
-#define INTEGRATOR_EBI_WS_12            0xA0
-#define INTEGRATOR_EBI_WS_13            0xB0
-#define INTEGRATOR_EBI_WS_14            0xC0
-#define INTEGRATOR_EBI_WS_15            0xD0
-#define INTEGRATOR_EBI_WS_16            0xE0
-#define INTEGRATOR_EBI_WS_17            0xF0
-
-
-#define INTEGRATOR_CT_BASE              0x13000000	 /*  Counter/Timers */
-#define INTEGRATOR_IC_BASE              0x14000000	 /*  Interrupt Controller */
-#define INTEGRATOR_RTC_BASE             0x15000000	 /*  Real Time Clock */
-#define INTEGRATOR_UART0_BASE           0x16000000	 /*  UART 0 */
-#define INTEGRATOR_UART1_BASE           0x17000000	 /*  UART 1 */
-#define INTEGRATOR_KBD_BASE             0x18000000	 /*  Keyboard */
-#define INTEGRATOR_MOUSE_BASE           0x19000000	 /*  Mouse */
-
-/*
- *  LED's & Switches
- *
- */
-#define INTEGRATOR_DBG_ALPHA_OFFSET     0x00
-#define INTEGRATOR_DBG_LEDS_OFFSET      0x04
-#define INTEGRATOR_DBG_SWITCH_OFFSET    0x08
-
-#define INTEGRATOR_DBG_BASE             0x1A000000
-#define INTEGRATOR_DBG_ALPHA            (INTEGRATOR_DBG_BASE + INTEGRATOR_DBG_ALPHA_OFFSET)
-#define INTEGRATOR_DBG_LEDS             (INTEGRATOR_DBG_BASE + INTEGRATOR_DBG_LEDS_OFFSET)
-#define INTEGRATOR_DBG_SWITCH           (INTEGRATOR_DBG_BASE + INTEGRATOR_DBG_SWITCH_OFFSET)
-
-
-#if defined(CONFIG_ARCH_INTEGRATOR_AP)
-#define INTEGRATOR_GPIO_BASE            0x1B000000	 /*  GPIO */
-#elif defined(CONFIG_ARCH_INTEGRATOR_CP)
-#define INTEGRATOR_GPIO_BASE            0xC9000000	 /*  GPIO */
-#endif
-
-/* ------------------------------------------------------------------------
- *  KMI keyboard/mouse definitions
- * ------------------------------------------------------------------------
- */
-/* PS2 Keyboard interface */
-#define KMI0_BASE                       INTEGRATOR_KBD_BASE
-
-/* PS2 Mouse interface */
-#define KMI1_BASE                       INTEGRATOR_MOUSE_BASE
-
-/* KMI definitions are now in include/asm-arm/hardware/amba_kmi.h -- rmk */
-
-/* ------------------------------------------------------------------------
- *  Where in the memory map does PCI live?
- * ------------------------------------------------------------------------
- *  This represents a fairly liberal usage of address space.  Even though
- *  the V3 only has two windows (therefore we need to map stuff on the fly),
- *  we maintain the same addresses, even if they're not mapped.
- *
- */
-#define PHYS_PCI_MEM_BASE               0x40000000   /* 512M to xxx */
-/*  unused 256M from A0000000-AFFFFFFF might be used for I2O ???
- */
-#define PHYS_PCI_IO_BASE                0x60000000   /* 16M to xxx */
-/*  unused (128-16)M from B1000000-B7FFFFFF
- */
-#define PHYS_PCI_CONFIG_BASE            0x61000000   /* 16M to xxx */
-/*  unused ((128-16)M - 64K) from XXX
- */
-#define PHYS_PCI_V3_BASE                0x62000000
-
-#define PCI_DRAMSIZE                    INTEGRATOR_SSRAM_SIZE
-
-/* 'export' these to UHAL */
-#define UHAL_PCI_IO                     PCI_IO_BASE
-#define UHAL_PCI_MEM                    PCI_MEM_BASE
-#define UHAL_PCI_ALLOC_IO_BASE          0x00004000
-#define UHAL_PCI_ALLOC_MEM_BASE         PCI_MEM_BASE
-#define UHAL_PCI_MAX_SLOT               20
-
-/* ========================================================================
- *  Start of uHAL definitions
- * ========================================================================
- */
-
-/* ------------------------------------------------------------------------
- *  Integrator Interrupt Controllers
- * ------------------------------------------------------------------------
- *
- *  Offsets from interrupt controller base
- *
- *  System Controller interrupt controller base is
- *
- * 	INTEGRATOR_IC_BASE + (header_number << 6)
- *
- *  Core Module interrupt controller base is
- *
- * 	INTEGRATOR_HDR_IC
- *
- */
-#define IRQ_STATUS                      0
-#define IRQ_RAW_STATUS                  0x04
-#define IRQ_ENABLE                      0x08
-#define IRQ_ENABLE_SET                  0x08
-#define IRQ_ENABLE_CLEAR                0x0C
-
-#define INT_SOFT_SET                    0x10
-#define INT_SOFT_CLEAR                  0x14
-
-#define FIQ_STATUS                      0x20
-#define FIQ_RAW_STATUS                  0x24
-#define FIQ_ENABLE                      0x28
-#define FIQ_ENABLE_SET                  0x28
-#define FIQ_ENABLE_CLEAR                0x2C
-
-
-/* ------------------------------------------------------------------------
- *  Interrupts
- * ------------------------------------------------------------------------
- *
- *
- *  Each Core Module has two interrupts controllers, one on the core module
- *  itself and one in the system controller on the motherboard.  The
- *  READ_INT macro in target.s reads both interrupt controllers and returns
- *  a 32 bit bitmask, bits 0 to 23 are interrupts from the system controller
- *  and bits 24 to 31 are from the core module.
- *
- *  The following definitions relate to the bitmask returned by READ_INT.
- *
- */
-
-/* ------------------------------------------------------------------------
- *  LED's - The header LED is not accessible via the uHAL API
- * ------------------------------------------------------------------------
- *
- */
-#define GREEN_LED                       0x01
-#define YELLOW_LED                      0x02
-#define RED_LED                         0x04
-#define GREEN_LED_2                     0x08
-#define ALL_LEDS                        0x0F
-
-#define LED_BANK                        INTEGRATOR_DBG_LEDS
-
-/*
- *  Memory definitions - run uHAL out of SSRAM.
- *
- */
-#define uHAL_MEMORY_SIZE                INTEGRATOR_SSRAM_SIZE
-
-/*
- *  Application Flash
- *
- */
-#define FLASH_BASE                      INTEGRATOR_FLASH_BASE
-#define FLASH_SIZE                      INTEGRATOR_FLASH_SIZE
-#define FLASH_END                       (FLASH_BASE + FLASH_SIZE - 1)
-#define FLASH_BLOCK_SIZE                SZ_128K
-
-/*
- *  Boot Flash
- *
- */
-#define EPROM_BASE                      INTEGRATOR_BOOT_ROM_HI
-#define EPROM_SIZE                      INTEGRATOR_BOOT_ROM_SIZE
-#define EPROM_END                       (EPROM_BASE + EPROM_SIZE - 1)
-
-/*
- *  Clean base - dummy
- *
- */
-#define CLEAN_BASE                      EPROM_BASE
-
-/*
- *  Timer definitions
- *
- *  Only use timer 1 & 2
- *  (both run at 24MHz and will need the clock divider set to 16).
- *
- *  Timer 0 runs at bus frequency and therefore could vary and currently
- *  uHAL can't handle that.
- *
- */
-
-#define INTEGRATOR_TIMER0_BASE          INTEGRATOR_CT_BASE
-#define INTEGRATOR_TIMER1_BASE          (INTEGRATOR_CT_BASE + 0x100)
-#define INTEGRATOR_TIMER2_BASE          (INTEGRATOR_CT_BASE + 0x200)
-
-#define MAX_TIMER                       2
-#define MAX_PERIOD                      699050
-#define TICKS_PER_uSEC                  24
-
-/*
- *  These are useconds NOT ticks.
- *
- */
-#define mSEC_1                          1000
-#define mSEC_5                          (mSEC_1 * 5)
-#define mSEC_10                         (mSEC_1 * 10)
-#define mSEC_25                         (mSEC_1 * 25)
-#define SEC_1                           (mSEC_1 * 1000)
-
-#define INTEGRATOR_CSR_BASE             0x10000000
-#define INTEGRATOR_CSR_SIZE             0x10000000
-
-#endif
-
-/* 	END */
diff --git a/include/asm-arm/arch-integrator/system.h b/include/asm-arm/arch-integrator/system.h
deleted file mode 100644
index 8ea442237d20..000000000000
--- a/include/asm-arm/arch-integrator/system.h
+++ /dev/null
@@ -1,44 +0,0 @@
-/*
- *  linux/include/asm-arm/arch-integrator/system.h
- *
- *  Copyright (C) 1999 ARM Limited
- *  Copyright (C) 2000 Deep Blue Solutions Ltd
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-#ifndef __ASM_ARCH_SYSTEM_H
-#define __ASM_ARCH_SYSTEM_H
-
-#include <asm/arch/cm.h>
-
-static inline void arch_idle(void)
-{
-	/*
-	 * This should do all the clock switching
-	 * and wait for interrupt tricks
-	 */
-	cpu_do_idle();
-}
-
-static inline void arch_reset(char mode)
-{
-	/*
-	 * To reset, we hit the on-board reset register
-	 * in the system FPGA
-	 */
-	cm_control(CM_CTRL_RESET, CM_CTRL_RESET);
-}
-
-#endif
diff --git a/include/asm-arm/arch-integrator/timex.h b/include/asm-arm/arch-integrator/timex.h
deleted file mode 100644
index 87a762818ba2..000000000000
--- a/include/asm-arm/arch-integrator/timex.h
+++ /dev/null
@@ -1,26 +0,0 @@
-/*
- *  linux/include/asm-arm/arch-integrator/timex.h
- *
- *  Integrator architecture timex specifications
- *
- *  Copyright (C) 1999 ARM Limited
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-/*
- * ??
- */
-#define CLOCK_TICK_RATE		(50000000 / 16)
diff --git a/include/asm-arm/arch-integrator/uncompress.h b/include/asm-arm/arch-integrator/uncompress.h
deleted file mode 100644
index f61825c4d901..000000000000
--- a/include/asm-arm/arch-integrator/uncompress.h
+++ /dev/null
@@ -1,50 +0,0 @@
-/*
- *  linux/include/asm-arm/arch-integrator/uncompress.h
- *
- *  Copyright (C) 1999 ARM Limited
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#define AMBA_UART_DR	(*(volatile unsigned char *)0x16000000)
-#define AMBA_UART_LCRH	(*(volatile unsigned char *)0x16000008)
-#define AMBA_UART_LCRM	(*(volatile unsigned char *)0x1600000c)
-#define AMBA_UART_LCRL	(*(volatile unsigned char *)0x16000010)
-#define AMBA_UART_CR	(*(volatile unsigned char *)0x16000014)
-#define AMBA_UART_FR	(*(volatile unsigned char *)0x16000018)
-
-/*
- * This does not append a newline
- */
-static void putc(int c)
-{
-	while (AMBA_UART_FR & (1 << 5))
-		barrier();
-
-	AMBA_UART_DR = c;
-}
-
-static inline void flush(void)
-{
-	while (AMBA_UART_FR & (1 << 3))
-		barrier();
-}
-
-/*
- * nothing to do
- */
-#define arch_decomp_setup()
-
-#define arch_decomp_wdog()
diff --git a/include/asm-arm/arch-integrator/vmalloc.h b/include/asm-arm/arch-integrator/vmalloc.h
deleted file mode 100644
index 170cccece523..000000000000
--- a/include/asm-arm/arch-integrator/vmalloc.h
+++ /dev/null
@@ -1,20 +0,0 @@
-/*
- *  linux/include/asm-arm/arch-integrator/vmalloc.h
- *
- *  Copyright (C) 2000 Russell King.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-#define VMALLOC_END       (PAGE_OFFSET + 0x10000000)
diff --git a/include/asm-arm/arch-iop13xx/debug-macro.S b/include/asm-arm/arch-iop13xx/debug-macro.S
deleted file mode 100644
index 788b4e386c16..000000000000
--- a/include/asm-arm/arch-iop13xx/debug-macro.S
+++ /dev/null
@@ -1,26 +0,0 @@
-/*
- * include/asm-arm/arch-iop13xx/debug-macro.S
- *
- * Debugging macro include header
- *
- * Copyright (C) 1994-1999 Russell King
- * Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-	.macro	addruart, rx
-	mrc	p15, 0, \rx, c1, c0
-	tst	\rx, #1			@ mmu enabled?
-	moveq	\rx, #0xff000000	@ physical
-	orreq	\rx, \rx, #0x00d80000
-	movne	\rx, #0xfe000000	@ virtual
-	orrne	\rx, \rx, #0x00e80000
-	orr	\rx, \rx, #0x00002300
-	orr	\rx, \rx, #0x00000040
-	.endm
-
-#define UART_SHIFT	2
-#include <asm/hardware/debug-8250.S>
diff --git a/include/asm-arm/arch-iop13xx/memory.h b/include/asm-arm/arch-iop13xx/memory.h
deleted file mode 100644
index 031a0fa78eff..000000000000
--- a/include/asm-arm/arch-iop13xx/memory.h
+++ /dev/null
@@ -1,64 +0,0 @@
-#ifndef __ASM_ARCH_MEMORY_H
-#define __ASM_ARCH_MEMORY_H
-
-#include <asm/arch/hardware.h>
-
-/*
- * Physical DRAM offset.
- */
-#define PHYS_OFFSET	UL(0x00000000)
-#define TASK_SIZE  	UL(0x3f000000)
-#define PAGE_OFFSET	UL(0x40000000)
-#define TASK_UNMAPPED_BASE ((TASK_SIZE + 0x01000000) / 3)
-
-#ifndef __ASSEMBLY__
-
-#if defined(CONFIG_ARCH_IOP13XX)
-#define IOP13XX_PMMR_V_START (IOP13XX_PMMR_VIRT_MEM_BASE)
-#define IOP13XX_PMMR_V_END   (IOP13XX_PMMR_VIRT_MEM_BASE + IOP13XX_PMMR_SIZE)
-#define IOP13XX_PMMR_P_START (IOP13XX_PMMR_PHYS_MEM_BASE)
-#define IOP13XX_PMMR_P_END   (IOP13XX_PMMR_PHYS_MEM_BASE + IOP13XX_PMMR_SIZE)
-
-/*
- * Virtual view <-> PCI DMA view memory address translations
- * virt_to_bus: Used to translate the virtual address to an
- *		address suitable to be passed to set_dma_addr
- * bus_to_virt: Used to convert an address for DMA operations
- *		to an address that the kernel can use.
- */
-
-/* RAM has 1:1 mapping on the PCIe/x Busses */
-#define __virt_to_bus(x)	(__virt_to_phys(x))
-#define __bus_to_virt(x)    (__phys_to_virt(x))
-
-#define virt_to_lbus(x) 					   \
-(( ((void*)(x) >= (void*)IOP13XX_PMMR_V_START) &&		   \
-((void*)(x) < (void*)IOP13XX_PMMR_V_END) ) ? 			   \
-((x) - IOP13XX_PMMR_VIRT_MEM_BASE + IOP13XX_PMMR_PHYS_MEM_BASE) : \
-((x) - PAGE_OFFSET + PHYS_OFFSET))
-
-#define lbus_to_virt(x)                                            \
-(( ((x) >= IOP13XX_PMMR_P_START) && ((x) < IOP13XX_PMMR_P_END) ) ? \
-((x) - IOP13XX_PMMR_PHYS_MEM_BASE + IOP13XX_PMMR_VIRT_MEM_BASE ) : \
-((x) - PHYS_OFFSET + PAGE_OFFSET))
-
-/* Device is an lbus device if it is on the platform bus of the IOP13XX */
-#define is_lbus_device(dev) (dev &&\
-			     (strncmp(dev->bus->name, "platform", 8) == 0))
-
-#define __arch_page_to_dma(dev, page)					\
-({is_lbus_device(dev) ? (dma_addr_t)virt_to_lbus(page_address(page)) : \
-(dma_addr_t)__virt_to_bus(page_address(page));})
-
-#define __arch_dma_to_virt(dev, addr) \
-({is_lbus_device(dev) ? lbus_to_virt(addr) : __bus_to_virt(addr);})
-
-#define __arch_virt_to_dma(dev, addr) \
-({is_lbus_device(dev) ? virt_to_lbus(addr) : __virt_to_bus(addr);})
-
-#endif /* CONFIG_ARCH_IOP13XX */
-#endif /* !ASSEMBLY */
-
-#define PFN_TO_NID(addr)	(0)
-
-#endif
diff --git a/include/asm-arm/arch-iop13xx/pci.h b/include/asm-arm/arch-iop13xx/pci.h
deleted file mode 100644
index 4041f30d4cd3..000000000000
--- a/include/asm-arm/arch-iop13xx/pci.h
+++ /dev/null
@@ -1,57 +0,0 @@
-#ifndef _IOP13XX_PCI_H_
-#define _IOP13XX_PCI_H_
-#include <asm/arch/irqs.h>
-#include <asm/io.h>
-
-struct pci_sys_data;
-struct hw_pci;
-int iop13xx_pci_setup(int nr, struct pci_sys_data *sys);
-struct pci_bus *iop13xx_scan_bus(int nr, struct pci_sys_data *);
-void iop13xx_atu_select(struct hw_pci *plat_pci);
-void iop13xx_pci_init(void);
-void iop13xx_map_pci_memory(void);
-
-#define IOP_PCI_STATUS_ERROR (PCI_STATUS_PARITY |	     \
-			       PCI_STATUS_SIG_TARGET_ABORT | \
-			       PCI_STATUS_REC_TARGET_ABORT | \
-			       PCI_STATUS_REC_TARGET_ABORT | \
-			       PCI_STATUS_REC_MASTER_ABORT | \
-			       PCI_STATUS_SIG_SYSTEM_ERROR | \
-	 		       PCI_STATUS_DETECTED_PARITY)
-
-#define IOP13XX_ATUE_ATUISR_ERROR (IOP13XX_ATUE_STAT_HALT_ON_ERROR |  \
-				    IOP13XX_ATUE_STAT_ROOT_SYS_ERR |   \
-				    IOP13XX_ATUE_STAT_PCI_IFACE_ERR |  \
-				    IOP13XX_ATUE_STAT_ERR_COR |	       \
-				    IOP13XX_ATUE_STAT_ERR_UNCOR |      \
-				    IOP13XX_ATUE_STAT_CRS |	       \
-				    IOP13XX_ATUE_STAT_DET_PAR_ERR |    \
-				    IOP13XX_ATUE_STAT_EXT_REC_MABORT | \
-				    IOP13XX_ATUE_STAT_SIG_TABORT |     \
-				    IOP13XX_ATUE_STAT_EXT_REC_TABORT | \
-				    IOP13XX_ATUE_STAT_MASTER_DATA_PAR)
-
-#define IOP13XX_ATUX_ATUISR_ERROR (IOP13XX_ATUX_STAT_TX_SCEM |        \
-				    IOP13XX_ATUX_STAT_REC_SCEM |       \
-				    IOP13XX_ATUX_STAT_TX_SERR |	       \
-				    IOP13XX_ATUX_STAT_DET_PAR_ERR |    \
-				    IOP13XX_ATUX_STAT_INT_REC_MABORT | \
-				    IOP13XX_ATUX_STAT_REC_SERR |       \
-				    IOP13XX_ATUX_STAT_EXT_REC_MABORT | \
-				    IOP13XX_ATUX_STAT_EXT_REC_TABORT | \
-				    IOP13XX_ATUX_STAT_EXT_SIG_TABORT | \
-				    IOP13XX_ATUX_STAT_MASTER_DATA_PAR)
-
-/* PCI interrupts
- */
-#define ATUX_INTA IRQ_IOP13XX_XINT0
-#define ATUX_INTB IRQ_IOP13XX_XINT1
-#define ATUX_INTC IRQ_IOP13XX_XINT2
-#define ATUX_INTD IRQ_IOP13XX_XINT3
-
-#define ATUE_INTA IRQ_IOP13XX_ATUE_IMA
-#define ATUE_INTB IRQ_IOP13XX_ATUE_IMB
-#define ATUE_INTC IRQ_IOP13XX_ATUE_IMC
-#define ATUE_INTD IRQ_IOP13XX_ATUE_IMD
-
-#endif /* _IOP13XX_PCI_H_ */
diff --git a/include/asm-arm/arch-iop13xx/system.h b/include/asm-arm/arch-iop13xx/system.h
deleted file mode 100644
index 8575af8db78c..000000000000
--- a/include/asm-arm/arch-iop13xx/system.h
+++ /dev/null
@@ -1,27 +0,0 @@
-/*
- * linux/include/asm-arm/arch-iop13xx/system.h
- *
- *  Copyright (C) 2004 Intel Corp.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#include <asm/arch/iop13xx.h>
-static inline void arch_idle(void)
-{
-	cpu_do_idle();
-}
-
-static inline void arch_reset(char mode)
-{
-	/*
-	 * Reset the internal bus (warning both cores are reset)
-	 */
-	write_wdtcr(IOP_WDTCR_EN_ARM);
-	write_wdtcr(IOP_WDTCR_EN);
-	write_wdtsr(IOP13XX_WDTSR_WRITE_EN | IOP13XX_WDTCR_IB_RESET);
-	write_wdtcr(0x1000);
-
-	for(;;);
-}
diff --git a/include/asm-arm/arch-iop13xx/timex.h b/include/asm-arm/arch-iop13xx/timex.h
deleted file mode 100644
index f0c51dd97ed8..000000000000
--- a/include/asm-arm/arch-iop13xx/timex.h
+++ /dev/null
@@ -1,3 +0,0 @@
-#include <asm/hardware.h>
-
-#define CLOCK_TICK_RATE (100 * HZ)
diff --git a/include/asm-arm/arch-iop13xx/uncompress.h b/include/asm-arm/arch-iop13xx/uncompress.h
deleted file mode 100644
index dd9c2934190e..000000000000
--- a/include/asm-arm/arch-iop13xx/uncompress.h
+++ /dev/null
@@ -1,23 +0,0 @@
-#include <asm/types.h>
-#include <linux/serial_reg.h>
-#include <asm/hardware.h>
-
-#define UART_BASE ((volatile u32 *)IOP13XX_UART1_PHYS)
-#define TX_DONE (UART_LSR_TEMT | UART_LSR_THRE)
-
-static inline void putc(char c)
-{
-	while ((UART_BASE[UART_LSR] & TX_DONE) != TX_DONE)
-		barrier();
-	UART_BASE[UART_TX] = c;
-}
-
-static inline void flush(void)
-{
-}
-
-/*
- * nothing to do
- */
-#define arch_decomp_setup()
-#define arch_decomp_wdog()
diff --git a/include/asm-arm/arch-iop32x/debug-macro.S b/include/asm-arm/arch-iop32x/debug-macro.S
deleted file mode 100644
index 9022b6849e23..000000000000
--- a/include/asm-arm/arch-iop32x/debug-macro.S
+++ /dev/null
@@ -1,20 +0,0 @@
-/*
- * include/asm-arm/arch-iop32x/debug-macro.S
- *
- * Debugging macro include header
- *
- * Copyright (C) 1994-1999 Russell King
- * Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-		.macro	addruart, rx
-		mov	\rx, #0xfe000000	@ physical as well as virtual
-		orr	\rx, \rx, #0x00800000	@ location of the UART
-		.endm
-
-#define UART_SHIFT	0
-#include <asm/hardware/debug-8250.S>
diff --git a/include/asm-arm/arch-iop32x/dma.h b/include/asm-arm/arch-iop32x/dma.h
deleted file mode 100644
index e977a9ef3160..000000000000
--- a/include/asm-arm/arch-iop32x/dma.h
+++ /dev/null
@@ -1,9 +0,0 @@
-/*
- * include/asm-arm/arch-iop32x/dma.h
- *
- * Copyright (C) 2004 Intel Corp.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
diff --git a/include/asm-arm/arch-iop32x/entry-macro.S b/include/asm-arm/arch-iop32x/entry-macro.S
deleted file mode 100644
index 207db99dfbd2..000000000000
--- a/include/asm-arm/arch-iop32x/entry-macro.S
+++ /dev/null
@@ -1,36 +0,0 @@
-/*
- * include/asm-arm/arch-iop32x/entry-macro.S
- *
- * Low-level IRQ helper macros for IOP32x-based platforms
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-#include <asm/arch/iop32x.h>
-
-	.macro	disable_fiq
-	.endm
-
-	.macro get_irqnr_preamble, base, tmp
-	mrc	p15, 0, \tmp, c15, c1, 0
-	orr	\tmp, \tmp, #(1 << 6)
-	mcr	p15, 0, \tmp, c15, c1, 0	@ Enable cp6 access
-	mrc	p15, 0, \tmp, c15, c1, 0
-	mov	\tmp, \tmp
-	sub	pc, pc, #4			@ cp_wait
-	.endm
-
-	.macro  get_irqnr_and_base, irqnr, irqstat, base, tmp
-	mrc     p6, 0, \irqstat, c8, c0, 0	@ Read IINTSRC
-	cmp     \irqstat, #0
-	clzne   \irqnr, \irqstat
-	rsbne   \irqnr, \irqnr, #31
-	.endm
-
-	.macro arch_ret_to_user, tmp1, tmp2
-	mrc	p15, 0, \tmp1, c15, c1, 0
-	ands	\tmp2, \tmp1, #(1 << 6)
-	bicne	\tmp1, \tmp1, #(1 << 6)
-	mcrne	p15, 0, \tmp1, c15, c1, 0	@ Disable cp6 access
-	.endm
diff --git a/include/asm-arm/arch-iop32x/hardware.h b/include/asm-arm/arch-iop32x/hardware.h
deleted file mode 100644
index 6556ed5eee31..000000000000
--- a/include/asm-arm/arch-iop32x/hardware.h
+++ /dev/null
@@ -1,44 +0,0 @@
-/*
- * include/asm-arm/arch-iop32x/hardware.h
- */
-
-#ifndef __HARDWARE_H
-#define __HARDWARE_H
-
-#include <asm/types.h>
-
-/*
- * Note about PCI IO space mappings
- *
- * To make IO space accesses efficient, we store virtual addresses in
- * the IO resources.
- *
- * The PCI IO space is located at virtual 0xfe000000 from physical
- * 0x90000000. The PCI BARs must be programmed with physical addresses,
- * but when we read them, we convert them to virtual addresses. See
- * arch/arm/plat-iop/pci.c.
- */
-#define pcibios_assign_all_busses() 1
-#define PCIBIOS_MIN_IO		0x00000000
-#define PCIBIOS_MIN_MEM		0x00000000
-
-#ifndef __ASSEMBLY__
-void iop32x_init_irq(void);
-#endif
-
-
-/*
- * Generic chipset bits
- */
-#include "iop32x.h"
-
-/*
- * Board specific bits
- */
-#include "glantank.h"
-#include "iq80321.h"
-#include "iq31244.h"
-#include "n2100.h"
-
-
-#endif
diff --git a/include/asm-arm/arch-iop32x/io.h b/include/asm-arm/arch-iop32x/io.h
deleted file mode 100644
index 958af751a484..000000000000
--- a/include/asm-arm/arch-iop32x/io.h
+++ /dev/null
@@ -1,27 +0,0 @@
-/*
- * include/asm-arm/arch-iop32x/io.h
- *
- * Copyright (C) 2001 MontaVista Software, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __IO_H
-#define __IO_H
-
-#include <asm/hardware.h>
-
-extern void __iomem *__iop3xx_ioremap(unsigned long cookie, size_t size,
-	unsigned int mtype);
-extern void __iop3xx_iounmap(void __iomem *addr);
-
-#define IO_SPACE_LIMIT		0xffffffff
-#define __io(p)		((void __iomem *)IOP3XX_PCI_IO_PHYS_TO_VIRT(p))
-#define __mem_pci(a)		(a)
-
-#define __arch_ioremap(a, s, f) __iop3xx_ioremap(a, s, f)
-#define __arch_iounmap(a)	 __iop3xx_iounmap(a)
-
-#endif
diff --git a/include/asm-arm/arch-iop32x/irqs.h b/include/asm-arm/arch-iop32x/irqs.h
deleted file mode 100644
index bbaef873afce..000000000000
--- a/include/asm-arm/arch-iop32x/irqs.h
+++ /dev/null
@@ -1,50 +0,0 @@
-/*
- * include/asm-arm/arch-iop32x/irqs.h
- *
- * Author:	Rory Bolt <rorybolt@pacbell.net>
- * Copyright:	(C) 2002 Rory Bolt
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __IRQS_H
-#define __IRQS_H
-
-/*
- * IOP80321 chipset interrupts
- */
-#define IRQ_IOP32X_DMA0_EOT	0
-#define IRQ_IOP32X_DMA0_EOC	1
-#define IRQ_IOP32X_DMA1_EOT	2
-#define IRQ_IOP32X_DMA1_EOC	3
-#define IRQ_IOP32X_AA_EOT	6
-#define IRQ_IOP32X_AA_EOC	7
-#define IRQ_IOP32X_CORE_PMON	8
-#define IRQ_IOP32X_TIMER0	9
-#define IRQ_IOP32X_TIMER1	10
-#define IRQ_IOP32X_I2C_0	11
-#define IRQ_IOP32X_I2C_1	12
-#define IRQ_IOP32X_MESSAGING	13
-#define IRQ_IOP32X_ATU_BIST	14
-#define IRQ_IOP32X_PERFMON	15
-#define IRQ_IOP32X_CORE_PMU	16
-#define IRQ_IOP32X_BIU_ERR	17
-#define IRQ_IOP32X_ATU_ERR	18
-#define IRQ_IOP32X_MCU_ERR	19
-#define IRQ_IOP32X_DMA0_ERR	20
-#define IRQ_IOP32X_DMA1_ERR	21
-#define IRQ_IOP32X_AA_ERR	23
-#define IRQ_IOP32X_MSG_ERR	24
-#define IRQ_IOP32X_SSP		25
-#define IRQ_IOP32X_XINT0	27
-#define IRQ_IOP32X_XINT1	28
-#define IRQ_IOP32X_XINT2	29
-#define IRQ_IOP32X_XINT3	30
-#define IRQ_IOP32X_HPI		31
-
-#define NR_IRQS			32
-
-
-#endif
diff --git a/include/asm-arm/arch-iop32x/memory.h b/include/asm-arm/arch-iop32x/memory.h
deleted file mode 100644
index c51072af214e..000000000000
--- a/include/asm-arm/arch-iop32x/memory.h
+++ /dev/null
@@ -1,26 +0,0 @@
-/*
- * include/asm-arm/arch-iop32x/memory.h
- */
-
-#ifndef __MEMORY_H
-#define __MEMORY_H
-
-#include <asm/hardware.h>
-
-/*
- * Physical DRAM offset.
- */
-#define PHYS_OFFSET	UL(0xa0000000)
-
-/*
- * Virtual view <-> PCI DMA view memory address translations
- * virt_to_bus: Used to translate the virtual address to an
- *		address suitable to be passed to set_dma_addr
- * bus_to_virt: Used to convert an address for DMA operations
- *		to an address that the kernel can use.
- */
-#define __virt_to_bus(x)	(__virt_to_phys(x))
-#define __bus_to_virt(x)	(__phys_to_virt(x))
-
-
-#endif
diff --git a/include/asm-arm/arch-iop32x/system.h b/include/asm-arm/arch-iop32x/system.h
deleted file mode 100644
index 17b7eb7e9c0d..000000000000
--- a/include/asm-arm/arch-iop32x/system.h
+++ /dev/null
@@ -1,33 +0,0 @@
-/*
- * include/asm-arm/arch-iop32x/system.h
- *
- * Copyright (C) 2001 MontaVista Software, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <asm/mach-types.h>
-
-static inline void arch_idle(void)
-{
-	cpu_do_idle();
-}
-
-static inline void arch_reset(char mode)
-{
-	local_irq_disable();
-
-	if (machine_is_n2100()) {
-		gpio_line_set(N2100_HARDWARE_RESET, GPIO_LOW);
-		gpio_line_config(N2100_HARDWARE_RESET, GPIO_OUT);
-		while (1)
-			;
-	}
-
-	*IOP3XX_PCSR = 0x30;
-
-	/* Jump into ROM at address 0 */
-	cpu_reset(0);
-}
diff --git a/include/asm-arm/arch-iop32x/timex.h b/include/asm-arm/arch-iop32x/timex.h
deleted file mode 100644
index 9934b087311b..000000000000
--- a/include/asm-arm/arch-iop32x/timex.h
+++ /dev/null
@@ -1,9 +0,0 @@
-/*
- * include/asm-arm/arch-iop32x/timex.h
- *
- * IOP32x architecture timex specifications
- */
-
-#include <asm/hardware.h>
-
-#define CLOCK_TICK_RATE		(100 * HZ)
diff --git a/include/asm-arm/arch-iop32x/uncompress.h b/include/asm-arm/arch-iop32x/uncompress.h
deleted file mode 100644
index 070f15818fe7..000000000000
--- a/include/asm-arm/arch-iop32x/uncompress.h
+++ /dev/null
@@ -1,39 +0,0 @@
-/*
- * include/asm-arm/arch-iop32x/uncompress.h
- */
-
-#include <asm/types.h>
-#include <asm/mach-types.h>
-#include <linux/serial_reg.h>
-#include <asm/hardware.h>
-
-static volatile u8 *uart_base;
-
-#define TX_DONE		(UART_LSR_TEMT | UART_LSR_THRE)
-
-static inline void putc(char c)
-{
-	while ((uart_base[UART_LSR] & TX_DONE) != TX_DONE)
-		barrier();
-	uart_base[UART_TX] = c;
-}
-
-static inline void flush(void)
-{
-}
-
-static __inline__ void __arch_decomp_setup(unsigned long arch_id)
-{
-	if (machine_is_iq80321())
-		uart_base = (volatile u8 *)IQ80321_UART;
-	else if (machine_is_iq31244() || machine_is_em7210())
-		uart_base = (volatile u8 *)IQ31244_UART;
-	else
-		uart_base = (volatile u8 *)0xfe800000;
-}
-
-/*
- * nothing to do
- */
-#define arch_decomp_setup()	__arch_decomp_setup(arch_id)
-#define arch_decomp_wdog()
diff --git a/include/asm-arm/arch-iop32x/vmalloc.h b/include/asm-arm/arch-iop32x/vmalloc.h
deleted file mode 100644
index 0a70baa19517..000000000000
--- a/include/asm-arm/arch-iop32x/vmalloc.h
+++ /dev/null
@@ -1,5 +0,0 @@
-/*
- * include/asm-arm/arch-iop32x/vmalloc.h
- */
-
-#define VMALLOC_END	0xfe000000
diff --git a/include/asm-arm/arch-iop33x/debug-macro.S b/include/asm-arm/arch-iop33x/debug-macro.S
deleted file mode 100644
index 9e7132ebe6a7..000000000000
--- a/include/asm-arm/arch-iop33x/debug-macro.S
+++ /dev/null
@@ -1,24 +0,0 @@
-/*
- * include/asm-arm/arch-iop33x/debug-macro.S
- *
- * Debugging macro include header
- *
- * Copyright (C) 1994-1999 Russell King
- * Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-		.macro	addruart, rx
-		mrc	p15, 0, \rx, c1, c0
-		tst	\rx, #1			@ mmu enabled?
-		moveq	\rx, #0xff000000	@ physical
-		movne	\rx, #0xfe000000	@ virtual
-		orr	\rx, \rx, #0x00ff0000
-		orr	\rx, \rx, #0x0000f700
-		.endm
-
-#define UART_SHIFT	2
-#include <asm/hardware/debug-8250.S>
diff --git a/include/asm-arm/arch-iop33x/dma.h b/include/asm-arm/arch-iop33x/dma.h
deleted file mode 100644
index b7775fdc5ad3..000000000000
--- a/include/asm-arm/arch-iop33x/dma.h
+++ /dev/null
@@ -1,9 +0,0 @@
-/*
- * include/asm-arm/arch-iop33x/dma.h
- *
- * Copyright (C) 2004 Intel Corp.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
diff --git a/include/asm-arm/arch-iop33x/entry-macro.S b/include/asm-arm/arch-iop33x/entry-macro.S
deleted file mode 100644
index b8e3d449e882..000000000000
--- a/include/asm-arm/arch-iop33x/entry-macro.S
+++ /dev/null
@@ -1,37 +0,0 @@
-/*
- * include/asm-arm/arch-iop33x/entry-macro.S
- *
- * Low-level IRQ helper macros for IOP33x-based platforms
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-#include <asm/arch/iop33x.h>
-
-	.macro	disable_fiq
-	.endm
-
-	.macro get_irqnr_preamble, base, tmp
-	mrc	p15, 0, \tmp, c15, c1, 0
-	orr	\tmp, \tmp, #(1 << 6)
-	mcr	p15, 0, \tmp, c15, c1, 0	@ Enable cp6 access
-	mrc	p15, 0, \tmp, c15, c1, 0
-	mov	\tmp, \tmp
-	sub	pc, pc, #4			@ cp_wait
-	.endm
-
-	.macro  get_irqnr_and_base, irqnr, irqstat, base, tmp
-	mrc     p6, 0, \irqstat, c14, c0, 0     @ Read IINTVEC
-	cmp     \irqstat, #0
-	mrceq   p6, 0, \irqstat, c14, c0, 0     @ erratum 63 workaround
-	adds    \irqnr, \irqstat, #1
-	movne   \irqnr, \irqstat, lsr #2
-	.endm
-
-	.macro arch_ret_to_user, tmp1, tmp2
-	mrc	p15, 0, \tmp1, c15, c1, 0
-	ands	\tmp2, \tmp1, #(1 << 6)
-	bicne	\tmp1, \tmp1, #(1 << 6)
-	mcrne	p15, 0, \tmp1, c15, c1, 0	@ Disable cp6 access
-	.endm
diff --git a/include/asm-arm/arch-iop33x/hardware.h b/include/asm-arm/arch-iop33x/hardware.h
deleted file mode 100644
index 0659cf94d040..000000000000
--- a/include/asm-arm/arch-iop33x/hardware.h
+++ /dev/null
@@ -1,46 +0,0 @@
-/*
- * include/asm-arm/arch-iop33x/hardware.h
- */
-
-#ifndef __HARDWARE_H
-#define __HARDWARE_H
-
-#include <asm/types.h>
-
-/*
- * Note about PCI IO space mappings
- *
- * To make IO space accesses efficient, we store virtual addresses in
- * the IO resources.
- *
- * The PCI IO space is located at virtual 0xfe000000 from physical
- * 0x90000000.  The PCI BARs must be programmed with physical addresses,
- * but when we read them, we convert them to virtual addresses.  See
- * arch/arm/mach-iop3xx/iop3xx-pci.c
- */
-#define pcibios_assign_all_busses()	1
-#define PCIBIOS_MIN_IO		0x00000000
-#define PCIBIOS_MIN_MEM		0x00000000
-
-#ifndef __ASSEMBLY__
-void iop33x_init_irq(void);
-
-extern struct platform_device iop33x_uart0_device;
-extern struct platform_device iop33x_uart1_device;
-#endif
-
-
-/*
- * Generic chipset bits
- *
- */
-#include "iop33x.h"
-
-/*
- * Board specific bits
- */
-#include "iq80331.h"
-#include "iq80332.h"
-
-
-#endif
diff --git a/include/asm-arm/arch-iop33x/io.h b/include/asm-arm/arch-iop33x/io.h
deleted file mode 100644
index fec9c53e2b10..000000000000
--- a/include/asm-arm/arch-iop33x/io.h
+++ /dev/null
@@ -1,27 +0,0 @@
-/*
- * include/asm-arm/arch-iop33x/io.h
- *
- * Copyright (C) 2001  MontaVista Software, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __IO_H
-#define __IO_H
-
-#include <asm/hardware.h>
-
-extern void __iomem *__iop3xx_ioremap(unsigned long cookie, size_t size,
-	unsigned int mtype);
-extern void __iop3xx_iounmap(void __iomem *addr);
-
-#define IO_SPACE_LIMIT		0xffffffff
-#define __io(p)		((void __iomem *)IOP3XX_PCI_IO_PHYS_TO_VIRT(p))
-#define __mem_pci(a)		(a)
-
-#define __arch_ioremap(a, s, f) __iop3xx_ioremap(a, s, f)
-#define __arch_iounmap(a)	 __iop3xx_iounmap(a)
-
-#endif
diff --git a/include/asm-arm/arch-iop33x/irqs.h b/include/asm-arm/arch-iop33x/irqs.h
deleted file mode 100644
index d045f8403396..000000000000
--- a/include/asm-arm/arch-iop33x/irqs.h
+++ /dev/null
@@ -1,60 +0,0 @@
-/*
- * include/asm-arm/arch-iop33x/irqs.h
- *
- * Author:	Dave Jiang (dave.jiang@intel.com)
- * Copyright:	(C) 2003 Intel Corp.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __IRQS_H
-#define __IRQS_H
-
-/*
- * IOP80331 chipset interrupts
- */
-#define IRQ_IOP33X_DMA0_EOT	0
-#define IRQ_IOP33X_DMA0_EOC	1
-#define IRQ_IOP33X_DMA1_EOT	2
-#define IRQ_IOP33X_DMA1_EOC	3
-#define IRQ_IOP33X_AA_EOT	6
-#define IRQ_IOP33X_AA_EOC	7
-#define IRQ_IOP33X_TIMER0	8
-#define IRQ_IOP33X_TIMER1	9
-#define IRQ_IOP33X_I2C_0	10
-#define IRQ_IOP33X_I2C_1	11
-#define IRQ_IOP33X_MSG		12
-#define IRQ_IOP33X_MSGIBQ	13
-#define IRQ_IOP33X_ATU_BIST	14
-#define IRQ_IOP33X_PERFMON	15
-#define IRQ_IOP33X_CORE_PMU	16
-#define IRQ_IOP33X_XINT0	24
-#define IRQ_IOP33X_XINT1	25
-#define IRQ_IOP33X_XINT2	26
-#define IRQ_IOP33X_XINT3	27
-#define IRQ_IOP33X_XINT8	32
-#define IRQ_IOP33X_XINT9	33
-#define IRQ_IOP33X_XINT10	34
-#define IRQ_IOP33X_XINT11	35
-#define IRQ_IOP33X_XINT12	36
-#define IRQ_IOP33X_XINT13	37
-#define IRQ_IOP33X_XINT14	38
-#define IRQ_IOP33X_XINT15	39
-#define IRQ_IOP33X_UART0	51
-#define IRQ_IOP33X_UART1	52
-#define IRQ_IOP33X_PBIE		53
-#define IRQ_IOP33X_ATU_CRW	54
-#define IRQ_IOP33X_ATU_ERR	55
-#define IRQ_IOP33X_MCU_ERR	56
-#define IRQ_IOP33X_DMA0_ERR	57
-#define IRQ_IOP33X_DMA1_ERR	58
-#define IRQ_IOP33X_AA_ERR	60
-#define IRQ_IOP33X_MSG_ERR	62
-#define IRQ_IOP33X_HPI		63
-
-#define NR_IRQS			64
-
-
-#endif
diff --git a/include/asm-arm/arch-iop33x/memory.h b/include/asm-arm/arch-iop33x/memory.h
deleted file mode 100644
index c8749127d6ab..000000000000
--- a/include/asm-arm/arch-iop33x/memory.h
+++ /dev/null
@@ -1,26 +0,0 @@
-/*
- * include/asm-arm/arch-iop33x/memory.h
- */
-
-#ifndef __MEMORY_H
-#define __MEMORY_H
-
-#include <asm/hardware.h>
-
-/*
- * Physical DRAM offset.
- */
-#define PHYS_OFFSET	UL(0x00000000)
-
-/*
- * Virtual view <-> PCI DMA view memory address translations
- * virt_to_bus: Used to translate the virtual address to an
- *		address suitable to be passed to set_dma_addr
- * bus_to_virt: Used to convert an address for DMA operations
- *		to an address that the kernel can use.
- */
-#define __virt_to_bus(x)	(__virt_to_phys(x))
-#define __bus_to_virt(x)	(__phys_to_virt(x))
-
-
-#endif
diff --git a/include/asm-arm/arch-iop33x/system.h b/include/asm-arm/arch-iop33x/system.h
deleted file mode 100644
index 00dd07ece262..000000000000
--- a/include/asm-arm/arch-iop33x/system.h
+++ /dev/null
@@ -1,22 +0,0 @@
-/*
- * include/asm-arm/arch-iop33x/system.h
- *
- * Copyright (C) 2001 MontaVista Software, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-static inline void arch_idle(void)
-{
-	cpu_do_idle();
-}
-
-static inline void arch_reset(char mode)
-{
-	*IOP3XX_PCSR = 0x30;
-
-	/* Jump into ROM at address 0 */
-	cpu_reset(0);
-}
diff --git a/include/asm-arm/arch-iop33x/timex.h b/include/asm-arm/arch-iop33x/timex.h
deleted file mode 100644
index fe3e1e369ff9..000000000000
--- a/include/asm-arm/arch-iop33x/timex.h
+++ /dev/null
@@ -1,9 +0,0 @@
-/*
- * include/asm-arm/arch-iop33x/timex.h
- *
- * IOP3xx architecture timex specifications
- */
-
-#include <asm/hardware.h>
-
-#define CLOCK_TICK_RATE		(100 * HZ)
diff --git a/include/asm-arm/arch-iop33x/uncompress.h b/include/asm-arm/arch-iop33x/uncompress.h
deleted file mode 100644
index e17fbc05877b..000000000000
--- a/include/asm-arm/arch-iop33x/uncompress.h
+++ /dev/null
@@ -1,37 +0,0 @@
-/*
- * include/asm-arm/arch-iop33x/uncompress.h
- */
-
-#include <asm/types.h>
-#include <asm/mach-types.h>
-#include <linux/serial_reg.h>
-#include <asm/hardware.h>
-
-static volatile u32 *uart_base;
-
-#define TX_DONE		(UART_LSR_TEMT | UART_LSR_THRE)
-
-static inline void putc(char c)
-{
-	while ((uart_base[UART_LSR] & TX_DONE) != TX_DONE)
-		barrier();
-	uart_base[UART_TX] = c;
-}
-
-static inline void flush(void)
-{
-}
-
-static __inline__ void __arch_decomp_setup(unsigned long arch_id)
-{
-	if (machine_is_iq80331() || machine_is_iq80332())
-		uart_base = (volatile u32 *)IOP33X_UART0_PHYS;
-	else
-		uart_base = (volatile u32 *)0xfe800000;
-}
-
-/*
- * nothing to do
- */
-#define arch_decomp_setup()	__arch_decomp_setup(arch_id)
-#define arch_decomp_wdog()
diff --git a/include/asm-arm/arch-iop33x/vmalloc.h b/include/asm-arm/arch-iop33x/vmalloc.h
deleted file mode 100644
index 66f545a7f4fc..000000000000
--- a/include/asm-arm/arch-iop33x/vmalloc.h
+++ /dev/null
@@ -1,5 +0,0 @@
-/*
- * include/asm-arm/arch-iop33x/vmalloc.h
- */
-
-#define VMALLOC_END	0xfe000000
diff --git a/include/asm-arm/arch-ixp2000/debug-macro.S b/include/asm-arm/arch-ixp2000/debug-macro.S
deleted file mode 100644
index bc8b39654793..000000000000
--- a/include/asm-arm/arch-ixp2000/debug-macro.S
+++ /dev/null
@@ -1,27 +0,0 @@
-/* linux/include/asm-arm/arch-ixp2000/debug-macro.S
- *
- * Debugging macro include header
- *
- *  Copyright (C) 1994-1999 Russell King
- *  Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
-*/
-
-		.macro  addruart,rx
-		mrc	p15, 0, \rx, c1, c0
-		tst	\rx, #1			@ MMU enabled?
-		moveq	\rx, #0xc0000000	@ Physical base
-		movne	\rx, #0xfe000000	@ virtual base
-		orrne	\rx, \rx, #0x00f00000
-		orr	\rx, \rx, #0x00030000
-#ifdef	__ARMEB__
-		orr	\rx, \rx, #0x00000003
-#endif
-		.endm
-
-#define UART_SHIFT	2
-#include <asm/hardware/debug-8250.S>
diff --git a/include/asm-arm/arch-ixp2000/dma.h b/include/asm-arm/arch-ixp2000/dma.h
deleted file mode 100644
index 548d8dc507eb..000000000000
--- a/include/asm-arm/arch-ixp2000/dma.h
+++ /dev/null
@@ -1,9 +0,0 @@
-/*
- * linux/include/asm-arm/arch-ixp2000/dma.h
- *
- * Copyright (C) 2002 Intel Corp.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
diff --git a/include/asm-arm/arch-ixp2000/entry-macro.S b/include/asm-arm/arch-ixp2000/entry-macro.S
deleted file mode 100644
index 11d512ad5945..000000000000
--- a/include/asm-arm/arch-ixp2000/entry-macro.S
+++ /dev/null
@@ -1,60 +0,0 @@
-/*
- * include/asm-arm/arch-ixp2000/entry-macro.S
- *
- * Low-level IRQ helper macros for IXP2000-based platforms
- *
- * This file is licensed under  the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-#include <asm/arch/irqs.h>
-
-		.macro  disable_fiq
-		.endm
-
-		.macro  get_irqnr_preamble, base, tmp
-		.endm
-
-		.macro  arch_ret_to_user, tmp1, tmp2
-		.endm
-
-		.macro  get_irqnr_and_base, irqnr, irqstat, base, tmp
-
-		mov	\irqnr, #0x0              @clear out irqnr as default
-                mov	\base, #0xfe000000
-		orr	\base, \base, #0x00e00000
-		orr	\base, \base, #0x08
-		ldr	\irqstat, [\base]         @ get interrupts
-
-		cmp	\irqstat, #0
-		beq	1001f
-
-		clz     \irqnr, \irqstat
-		mov     \base, #31
-		subs    \irqnr, \base, \irqnr
-
-		/*
-		 * We handle PCIA and PCIB here so we don't have an
-		 * extra layer of code just to check these two bits.
-		 */
-		cmp	\irqnr, #IRQ_IXP2000_PCI
-		bne	1001f
-
-		mov	\base, #0xfe000000
-		orr	\base, \base, #0x00c00000
-		orr	\base, \base, #0x00000100
-		orr	\base, \base, #0x00000058
-		ldr	\irqstat, [\base]
-
-		mov	\tmp, #(1<<26)
-		tst	\irqstat, \tmp
-		movne	\irqnr, #IRQ_IXP2000_PCIA
-		bne	1001f
-
-		mov	\tmp, #(1<<27)
-		tst	\irqstat, \tmp
-		movne	\irqnr, #IRQ_IXP2000_PCIB
-
-1001:
-		.endm
-
diff --git a/include/asm-arm/arch-ixp2000/gpio.h b/include/asm-arm/arch-ixp2000/gpio.h
deleted file mode 100644
index 03cbbe1fd9d8..000000000000
--- a/include/asm-arm/arch-ixp2000/gpio.h
+++ /dev/null
@@ -1,48 +0,0 @@
-/*
- * include/asm-arm/arch-ixp2000/gpio.h
- *
- * Copyright (C) 2002 Intel Corporation.
- *
- * This program is free software, you can redistribute it and/or modify 
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-/*
- * IXP2000 GPIO in/out, edge/level detection for IRQs:
- * IRQs are generated on Falling-edge, Rising-Edge, Level-low, Level-High
- * or both Falling-edge and Rising-edge.  
- * This must be called *before* the corresponding IRQ is registerd.
- * Use this instead of directly setting the GPIO registers.
- * GPIOs may also be used as GPIOs (e.g. for emulating i2c/smb)
- */
-#ifndef __ASM_ARCH_GPIO_H
-#define __ASM_ARCH_GPIO_H
-
-#ifndef __ASSEMBLY__
-
-#define GPIO_IN				0
-#define GPIO_OUT			1
-
-#define IXP2000_GPIO_LOW		0
-#define IXP2000_GPIO_HIGH		1
-
-extern void gpio_line_config(int line, int direction);
-
-static inline int gpio_line_get(int line)
-{
-	return (((*IXP2000_GPIO_PLR) >> line) & 1);
-}
-
-static inline void gpio_line_set(int line, int value)
-{
-	if (value == IXP2000_GPIO_HIGH) {
-		ixp2000_reg_write(IXP2000_GPIO_POSR, 1 << line);
-	} else if (value == IXP2000_GPIO_LOW) {
-		ixp2000_reg_write(IXP2000_GPIO_POCR, 1 << line);
-	}
-}
-
-#endif /* !__ASSEMBLY__ */
-
-#endif /* ASM_ARCH_IXP2000_GPIO_H_ */
diff --git a/include/asm-arm/arch-ixp2000/hardware.h b/include/asm-arm/arch-ixp2000/hardware.h
deleted file mode 100644
index e7ea781c48aa..000000000000
--- a/include/asm-arm/arch-ixp2000/hardware.h
+++ /dev/null
@@ -1,44 +0,0 @@
-/*
- * linux/include/asm-arm/arch-ixp2000/hardware.h
- *
- * Hardware definitions for IXP2400/2800 based systems
- *
- * Original Author: Naeem M Afzal <naeem.m.afzal@intel.com>
- *
- * Maintainer: Deepak Saxena <dsaxena@mvista.com>
- *
- * Copyright (C) 2001-2002 Intel Corp.
- * Copyright (C) 2003-2004 MontaVista Software, Inc.
- *
- *  This program is free software; you can redistribute  it and/or modify it
- *  under  the terms of  the GNU General  Public License as published by the
- *  Free Software Foundation;  either version 2 of the  License, or (at your
- *  option) any later version.
- */
-
-#ifndef __ASM_ARCH_HARDWARE_H__
-#define __ASM_ARCH_HARDWARE_H__
-
-/*
- * This needs to be platform-specific?
- */
-#define PCIBIOS_MIN_IO          0x00000000
-#define PCIBIOS_MIN_MEM         0x00000000
-
-#include "ixp2000-regs.h"	/* Chipset Registers */
-
-#define pcibios_assign_all_busses() 0
-
-/*
- * Platform helper functions
- */
-#include "platform.h"
-
-/*
- * Platform-specific bits
- */
-#include "enp2611.h"		/* ENP-2611 */
-#include "ixdp2x00.h"		/* IXDP2400/2800 */
-#include "ixdp2x01.h"		/* IXDP2401/2801 */
-
-#endif  /* _ASM_ARCH_HARDWARE_H__ */
diff --git a/include/asm-arm/arch-ixp2000/io.h b/include/asm-arm/arch-ixp2000/io.h
deleted file mode 100644
index c0ff2c6c66e7..000000000000
--- a/include/asm-arm/arch-ixp2000/io.h
+++ /dev/null
@@ -1,134 +0,0 @@
-/*
- * linux/include/asm-arm/arch-ixp2000/io.h
- *
- * Original Author: Naeem M Afzal <naeem.m.afzal@intel.com>
- * Maintainer: Deepak Saxena <dsaxena@plexity.net>
- *
- * Copyright (C) 2002  Intel Corp.
- * Copyrgiht (C) 2003-2004 MontaVista Software, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ASM_ARM_ARCH_IO_H
-#define __ASM_ARM_ARCH_IO_H
-
-#include <asm/hardware.h>
-
-#define IO_SPACE_LIMIT		0xffffffff
-#define __mem_pci(a)		(a)
-
-/*
- * The A? revisions of the IXP2000s assert byte lanes for PCI I/O
- * transactions the other way round (MEM transactions don't have this
- * issue), so if we want to support those models, we need to override
- * the standard I/O functions.
- *
- * B0 and later have a bit that can be set to 1 to get the proper
- * behavior for I/O transactions, which then allows us to use the
- * standard I/O functions.  This is what we do if the user does not
- * explicitly ask for support for pre-B0.
- */
-#ifdef CONFIG_IXP2000_SUPPORT_BROKEN_PCI_IO
-#define ___io(p)		((void __iomem *)((p)+IXP2000_PCI_IO_VIRT_BASE))
-
-#define alignb(addr)		(void __iomem *)((unsigned long)(addr) ^ 3)
-#define alignw(addr)		(void __iomem *)((unsigned long)(addr) ^ 2)
-
-#define outb(v,p)		__raw_writeb((v),alignb(___io(p)))
-#define outw(v,p)		__raw_writew((v),alignw(___io(p)))
-#define outl(v,p)		__raw_writel((v),___io(p))
-
-#define inb(p)		({ unsigned int __v = __raw_readb(alignb(___io(p))); __v; })
-#define inw(p)		\
-	({ unsigned int __v = (__raw_readw(alignw(___io(p)))); __v; })
-#define inl(p)		\
-	({ unsigned int __v = (__raw_readl(___io(p))); __v; })
-
-#define outsb(p,d,l)		__raw_writesb(alignb(___io(p)),d,l)
-#define outsw(p,d,l)		__raw_writesw(alignw(___io(p)),d,l)
-#define outsl(p,d,l)		__raw_writesl(___io(p),d,l)
-
-#define insb(p,d,l)		__raw_readsb(alignb(___io(p)),d,l)
-#define insw(p,d,l)		__raw_readsw(alignw(___io(p)),d,l)
-#define insl(p,d,l)		__raw_readsl(___io(p),d,l)
-
-#define __is_io_address(p)	((((unsigned long)(p)) & ~(IXP2000_PCI_IO_SIZE - 1)) == IXP2000_PCI_IO_VIRT_BASE)
-
-#define ioread8(p)						\
-	({							\
-		unsigned int __v;				\
-								\
-		if (__is_io_address(p)) {			\
-			__v = __raw_readb(alignb(p));		\
-		} else {					\
-			__v = __raw_readb(p);			\
-		}						\
-								\
-		__v;						\
-	})							\
-
-#define ioread16(p)						\
-	({							\
-		unsigned int __v;				\
-								\
-		if (__is_io_address(p)) {			\
-			__v = __raw_readw(alignw(p));		\
-		} else {					\
-			__v = le16_to_cpu(__raw_readw(p));	\
-		}						\
-								\
-		__v;						\
-	})
-
-#define ioread32(p)						\
-	({							\
-		unsigned int __v;				\
-								\
-		if (__is_io_address(p)) {			\
-			__v = __raw_readl(p);			\
-		} else {					\
-			__v = le32_to_cpu(__raw_readl(p));	\
-		}						\
-								\
-		 __v;						\
-	})
-
-#define iowrite8(v,p)						\
-	({							\
-		if (__is_io_address(p)) {			\
-			__raw_writeb((v), alignb(p));		\
-		} else {					\
-			__raw_writeb((v), p);			\
-		}						\
-	})
-
-#define iowrite16(v,p)						\
-	({							\
-		if (__is_io_address(p)) {			\
-			__raw_writew((v), alignw(p));		\
-		} else {					\
-			__raw_writew(cpu_to_le16(v), p);	\
-		}						\
-	})
-
-#define iowrite32(v,p)						\
-	({							\
-		if (__is_io_address(p)) {			\
-			__raw_writel((v), p);			\
-		} else {					\
-			__raw_writel(cpu_to_le32(v), p);	\
-		}						\
-	})
-
-#define ioport_map(port, nr)	___io(port)
-
-#define ioport_unmap(addr)
-#else
-#define __io(p)			((void __iomem *)((p)+IXP2000_PCI_IO_VIRT_BASE))
-#endif
-
-
-#endif
diff --git a/include/asm-arm/arch-ixp2000/irqs.h b/include/asm-arm/arch-ixp2000/irqs.h
deleted file mode 100644
index 62f09c7ff420..000000000000
--- a/include/asm-arm/arch-ixp2000/irqs.h
+++ /dev/null
@@ -1,207 +0,0 @@
-/*
- * linux/include/asm-arm/arch-ixp2000/irqs.h
- *
- * Original Author: Naeem Afzal <naeem.m.afzal@intel.com>
- * Maintainer: Deepak Saxena <dsaxena@plexity.net>
- *
- * Copyright (C) 2002 Intel Corp.
- * Copyright (C) 2003-2004 MontaVista Software, Inc.
- * 
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef _IRQS_H
-#define _IRQS_H
-
-/*
- * Do NOT add #ifdef MACHINE_FOO in here.
- * Simpy add your machine IRQs here and increase NR_IRQS if needed to
- * hold your machine's IRQ table.
- */
-
-/*
- * Some interrupt numbers go unused b/c the IRQ mask/ummask/status
- * register has those bit reserved. We just mark those interrupts
- * as invalid and this allows us to do mask/unmask with a single
- * shift operation instead of having to map the IRQ number to
- * a HW IRQ number.
- */
-#define	IRQ_IXP2000_SOFT_INT		0 /* soft interrupt */
-#define	IRQ_IXP2000_ERRSUM		1 /* OR of all bits in ErrorStatus reg*/
-#define	IRQ_IXP2000_UART		2
-#define	IRQ_IXP2000_GPIO		3
-#define	IRQ_IXP2000_TIMER1     		4
-#define	IRQ_IXP2000_TIMER2     		5
-#define	IRQ_IXP2000_TIMER3     		6
-#define	IRQ_IXP2000_TIMER4     		7
-#define	IRQ_IXP2000_PMU        		8               
-#define	IRQ_IXP2000_SPF        		9  /* Slow port framer IRQ */
-#define	IRQ_IXP2000_DMA1      		10
-#define	IRQ_IXP2000_DMA2      		11
-#define	IRQ_IXP2000_DMA3      		12
-#define	IRQ_IXP2000_PCI_DOORBELL	13
-#define	IRQ_IXP2000_ME_ATTN       	14 
-#define	IRQ_IXP2000_PCI   		15 /* PCI INTA or INTB */
-#define	IRQ_IXP2000_THDA0   		16 /* thread 0-31A */
-#define	IRQ_IXP2000_THDA1  		17 /* thread 32-63A, IXP2800 only */
-#define	IRQ_IXP2000_THDA2		18 /* thread 64-95A */
-#define	IRQ_IXP2000_THDA3 		19 /* thread 96-127A, IXP2800 only */
-#define	IRQ_IXP2000_THDB0		24 /* thread 0-31B */
-#define	IRQ_IXP2000_THDB1		25 /* thread 32-63B, IXP2800 only */
-#define	IRQ_IXP2000_THDB2		26 /* thread 64-95B */
-#define	IRQ_IXP2000_THDB3		27 /* thread 96-127B, IXP2800 only */
-
-/* define generic GPIOs */
-#define IRQ_IXP2000_GPIO0		32
-#define IRQ_IXP2000_GPIO1		33
-#define IRQ_IXP2000_GPIO2		34
-#define IRQ_IXP2000_GPIO3		35
-#define IRQ_IXP2000_GPIO4		36
-#define IRQ_IXP2000_GPIO5		37
-#define IRQ_IXP2000_GPIO6		38
-#define IRQ_IXP2000_GPIO7		39
-
-/* split off the 2 PCI sources */
-#define IRQ_IXP2000_PCIA		40
-#define IRQ_IXP2000_PCIB		41
-
-/* Int sources from IRQ_ERROR_STATUS */
-#define IRQ_IXP2000_DRAM0_MIN_ERR	42
-#define IRQ_IXP2000_DRAM0_MAJ_ERR	43
-#define IRQ_IXP2000_DRAM1_MIN_ERR	44
-#define IRQ_IXP2000_DRAM1_MAJ_ERR	45
-#define IRQ_IXP2000_DRAM2_MIN_ERR	46
-#define IRQ_IXP2000_DRAM2_MAJ_ERR	47
-/* 48-57 reserved */
-#define IRQ_IXP2000_SRAM0_ERR		58
-#define IRQ_IXP2000_SRAM1_ERR		59
-#define IRQ_IXP2000_SRAM2_ERR		60
-#define IRQ_IXP2000_SRAM3_ERR		61
-/* 62-65 reserved */
-#define IRQ_IXP2000_MEDIA_ERR		66
-#define IRQ_IXP2000_PCI_ERR			67
-#define IRQ_IXP2000_SP_INT			68
-
-#define NR_IXP2000_IRQS				69
-
-#define	IXP2000_BOARD_IRQ(x)		(NR_IXP2000_IRQS + (x))
-
-#define	IXP2000_BOARD_IRQ_MASK(irq)	(1 << (irq - NR_IXP2000_IRQS))	
-
-#define IXP2000_ERR_IRQ_MASK(irq) ( 1 << (irq - IRQ_IXP2000_DRAM0_MIN_ERR))
-#define IXP2000_VALID_ERR_IRQ_MASK (\
-		IXP2000_ERR_IRQ_MASK(IRQ_IXP2000_DRAM0_MIN_ERR) | \
-		IXP2000_ERR_IRQ_MASK(IRQ_IXP2000_DRAM0_MAJ_ERR) | \
-		IXP2000_ERR_IRQ_MASK(IRQ_IXP2000_DRAM1_MIN_ERR) | \
-		IXP2000_ERR_IRQ_MASK(IRQ_IXP2000_DRAM1_MAJ_ERR) | \
-		IXP2000_ERR_IRQ_MASK(IRQ_IXP2000_DRAM2_MIN_ERR) | \
-		IXP2000_ERR_IRQ_MASK(IRQ_IXP2000_DRAM2_MAJ_ERR) | \
-		IXP2000_ERR_IRQ_MASK(IRQ_IXP2000_SRAM0_ERR) | \
-		IXP2000_ERR_IRQ_MASK(IRQ_IXP2000_SRAM1_ERR) | \
-		IXP2000_ERR_IRQ_MASK(IRQ_IXP2000_SRAM2_ERR) | \
-		IXP2000_ERR_IRQ_MASK(IRQ_IXP2000_SRAM3_ERR) | \
-		IXP2000_ERR_IRQ_MASK(IRQ_IXP2000_MEDIA_ERR) | \
-		IXP2000_ERR_IRQ_MASK(IRQ_IXP2000_PCI_ERR) | \
-		IXP2000_ERR_IRQ_MASK(IRQ_IXP2000_SP_INT)	)
-
-/*
- * This allows for all the on-chip sources plus up to 32 CPLD based
- * IRQs. Should be more than enough.
- */
-#define	IXP2000_BOARD_IRQS		32
-#define NR_IRQS				(NR_IXP2000_IRQS + IXP2000_BOARD_IRQS)
-
-
-/* 
- * IXDP2400 specific IRQs
- */
-#define	IRQ_IXDP2400_INGRESS_NPU	IXP2000_BOARD_IRQ(0) 
-#define	IRQ_IXDP2400_ENET		IXP2000_BOARD_IRQ(1) 
-#define	IRQ_IXDP2400_MEDIA_PCI		IXP2000_BOARD_IRQ(2) 
-#define	IRQ_IXDP2400_MEDIA_SP		IXP2000_BOARD_IRQ(3) 
-#define	IRQ_IXDP2400_SF_PCI		IXP2000_BOARD_IRQ(4) 
-#define	IRQ_IXDP2400_SF_SP		IXP2000_BOARD_IRQ(5) 
-#define	IRQ_IXDP2400_PMC		IXP2000_BOARD_IRQ(6) 
-#define	IRQ_IXDP2400_TVM		IXP2000_BOARD_IRQ(7) 
-
-#define	NR_IXDP2400_IRQS		((IRQ_IXDP2400_TVM)+1)  
-#define	IXDP2400_NR_IRQS		NR_IXDP2400_IRQS - NR_IXP2000_IRQS
-
-/* IXDP2800 specific IRQs */
-#define IRQ_IXDP2800_EGRESS_ENET	IXP2000_BOARD_IRQ(0)
-#define IRQ_IXDP2800_INGRESS_NPU	IXP2000_BOARD_IRQ(1)
-#define IRQ_IXDP2800_PMC		IXP2000_BOARD_IRQ(2)
-#define IRQ_IXDP2800_FABRIC_PCI		IXP2000_BOARD_IRQ(3)
-#define IRQ_IXDP2800_FABRIC		IXP2000_BOARD_IRQ(4)
-#define IRQ_IXDP2800_MEDIA		IXP2000_BOARD_IRQ(5)
-
-#define	NR_IXDP2800_IRQS		((IRQ_IXDP2800_MEDIA)+1)
-#define	IXDP2800_NR_IRQS		NR_IXDP2800_IRQS - NR_IXP2000_IRQS
-
-/* 
- * IRQs on both IXDP2x01 boards
- */
-#define IRQ_IXDP2X01_SPCI_DB_0		IXP2000_BOARD_IRQ(2)
-#define IRQ_IXDP2X01_SPCI_DB_1		IXP2000_BOARD_IRQ(3)
-#define IRQ_IXDP2X01_SPCI_PMC_INTA	IXP2000_BOARD_IRQ(4)
-#define IRQ_IXDP2X01_SPCI_PMC_INTB	IXP2000_BOARD_IRQ(5)
-#define IRQ_IXDP2X01_SPCI_PMC_INTC	IXP2000_BOARD_IRQ(6)
-#define IRQ_IXDP2X01_SPCI_PMC_INTD	IXP2000_BOARD_IRQ(7)
-#define IRQ_IXDP2X01_SPCI_FIC_INT	IXP2000_BOARD_IRQ(8)
-#define IRQ_IXDP2X01_IPMI_FROM		IXP2000_BOARD_IRQ(16)
-#define IRQ_IXDP2X01_125US		IXP2000_BOARD_IRQ(17)
-#define IRQ_IXDP2X01_DB_0_ADD		IXP2000_BOARD_IRQ(18)
-#define IRQ_IXDP2X01_DB_1_ADD		IXP2000_BOARD_IRQ(19)
-#define IRQ_IXDP2X01_UART1		IXP2000_BOARD_IRQ(21)
-#define IRQ_IXDP2X01_UART2		IXP2000_BOARD_IRQ(22)
-#define IRQ_IXDP2X01_FIC_ADD_INT	IXP2000_BOARD_IRQ(24)
-#define IRQ_IXDP2X01_CS8900		IXP2000_BOARD_IRQ(25)
-#define IRQ_IXDP2X01_BBSRAM		IXP2000_BOARD_IRQ(26)
-
-#define IXDP2X01_VALID_IRQ_MASK ( \
-		IXP2000_BOARD_IRQ_MASK(IRQ_IXDP2X01_SPCI_DB_0) | \
-		IXP2000_BOARD_IRQ_MASK(IRQ_IXDP2X01_SPCI_DB_1) | \
-		IXP2000_BOARD_IRQ_MASK(IRQ_IXDP2X01_SPCI_PMC_INTA) | \
-		IXP2000_BOARD_IRQ_MASK(IRQ_IXDP2X01_SPCI_PMC_INTB) | \
-		IXP2000_BOARD_IRQ_MASK(IRQ_IXDP2X01_SPCI_PMC_INTC) | \
-		IXP2000_BOARD_IRQ_MASK(IRQ_IXDP2X01_SPCI_PMC_INTD) | \
-		IXP2000_BOARD_IRQ_MASK(IRQ_IXDP2X01_SPCI_FIC_INT) | \
-		IXP2000_BOARD_IRQ_MASK(IRQ_IXDP2X01_IPMI_FROM) | \
-		IXP2000_BOARD_IRQ_MASK(IRQ_IXDP2X01_125US) | \
-		IXP2000_BOARD_IRQ_MASK(IRQ_IXDP2X01_DB_0_ADD) | \
-		IXP2000_BOARD_IRQ_MASK(IRQ_IXDP2X01_DB_1_ADD) | \
-		IXP2000_BOARD_IRQ_MASK(IRQ_IXDP2X01_UART1) | \
-		IXP2000_BOARD_IRQ_MASK(IRQ_IXDP2X01_UART2) | \
-		IXP2000_BOARD_IRQ_MASK(IRQ_IXDP2X01_FIC_ADD_INT) | \
-		IXP2000_BOARD_IRQ_MASK(IRQ_IXDP2X01_CS8900) | \
-		IXP2000_BOARD_IRQ_MASK(IRQ_IXDP2X01_BBSRAM) )
-
-/* 
- * IXDP2401 specific IRQs
- */
-#define IRQ_IXDP2401_INTA_82546		IXP2000_BOARD_IRQ(0)
-#define IRQ_IXDP2401_INTB_82546		IXP2000_BOARD_IRQ(1)
-
-#define	IXDP2401_VALID_IRQ_MASK ( \
-		IXDP2X01_VALID_IRQ_MASK | \
-		IXP2000_BOARD_IRQ_MASK(IRQ_IXDP2401_INTA_82546) |\
-		IXP2000_BOARD_IRQ_MASK(IRQ_IXDP2401_INTB_82546))
-
-/*
- * IXDP2801-specific IRQs
- */
-#define IRQ_IXDP2801_RIV		IXP2000_BOARD_IRQ(0)
-#define IRQ_IXDP2801_CNFG_MEDIA		IXP2000_BOARD_IRQ(27)
-#define IRQ_IXDP2801_CLOCK_REF		IXP2000_BOARD_IRQ(28)
-
-#define	IXDP2801_VALID_IRQ_MASK ( \
-		IXDP2X01_VALID_IRQ_MASK | \
-		IXP2000_BOARD_IRQ_MASK(IRQ_IXDP2801_RIV) |\
-		IXP2000_BOARD_IRQ_MASK(IRQ_IXDP2801_CNFG_MEDIA) |\
-		IXP2000_BOARD_IRQ_MASK(IRQ_IXDP2801_CLOCK_REF))
-
-#define	NR_IXDP2X01_IRQS		((IRQ_IXDP2801_CLOCK_REF) + 1)
-
-#endif /*_IRQS_H*/
diff --git a/include/asm-arm/arch-ixp2000/memory.h b/include/asm-arm/arch-ixp2000/memory.h
deleted file mode 100644
index 21e1de51e3f6..000000000000
--- a/include/asm-arm/arch-ixp2000/memory.h
+++ /dev/null
@@ -1,34 +0,0 @@
-/*
- * linux/include/asm-arm/arch-ixp2000/memory.h
- *
- * Copyright (c) 2002 Intel Corp.
- * Copyright (c) 2003-2004 MontaVista Software, Inc.
- *
- *  This program is free software; you can redistribute  it and/or modify it
- *  under  the terms of  the GNU General  Public License as published by the
- *  Free Software Foundation;  either version 2 of the  License, or (at your
- *  option) any later version.
- */
-
-#ifndef __ASM_ARCH_MEMORY_H
-#define __ASM_ARCH_MEMORY_H
-
-#define PHYS_OFFSET	UL(0x00000000)
-
-/*
- * Virtual view <-> DMA view memory address translations
- * virt_to_bus: Used to translate the virtual address to an
- *		address suitable to be passed to set_dma_addr
- * bus_to_virt: Used to convert an address for DMA operations
- *		to an address that the kernel can use.
- */
-#include <asm/arch/ixp2000-regs.h>
-
-#define __virt_to_bus(v) \
-	(((__virt_to_phys(v) - 0x0) + (*IXP2000_PCI_SDRAM_BAR & 0xfffffff0)))
-
-#define __bus_to_virt(b) \
-	__phys_to_virt((((b - (*IXP2000_PCI_SDRAM_BAR & 0xfffffff0)) + 0x0)))
-
-#endif
-
diff --git a/include/asm-arm/arch-ixp2000/platform.h b/include/asm-arm/arch-ixp2000/platform.h
deleted file mode 100644
index a66317ab2071..000000000000
--- a/include/asm-arm/arch-ixp2000/platform.h
+++ /dev/null
@@ -1,152 +0,0 @@
-/*
- * include/asm-arm/arch-ixp2000/platform.h
- *
- * Various bits of code used by platform-level code.
- *
- * Author: Deepak Saxena <dsaxena@plexity.net>
- *
- * Copyright 2004 (c) MontaVista Software, Inc. 
- * 
- * This file is licensed under  the terms of the GNU General Public 
- * License version 2. This program is licensed "as is" without any 
- * warranty of any kind, whether express or implied.
- */
-
-
-#ifndef __ASSEMBLY__
-
-static inline unsigned long ixp2000_reg_read(volatile void *reg)
-{
-	return *((volatile unsigned long *)reg);
-}
-
-static inline void ixp2000_reg_write(volatile void *reg, unsigned long val)
-{
-	*((volatile unsigned long *)reg) = val;
-}
-
-/*
- * On the IXP2400, we can't use XCB=000 due to chip bugs.  We use
- * XCB=101 instead, but that makes all I/O accesses bufferable.  This
- * is not a problem in general, but we do have to be slightly more
- * careful because I/O writes are no longer automatically flushed out
- * of the write buffer.
- *
- * In cases where we want to make sure that a write has been flushed
- * out of the write buffer before we proceed, for example when masking
- * a device interrupt before re-enabling IRQs in CPSR, we can use this
- * function, ixp2000_reg_wrb, which performs a write, a readback, and
- * issues a dummy instruction dependent on the value of the readback
- * (mov rX, rX) to make sure that the readback has completed before we
- * continue.
- */
-static inline void ixp2000_reg_wrb(volatile void *reg, unsigned long val)
-{
-	unsigned long dummy;
-
-	*((volatile unsigned long *)reg) = val;
-
-	dummy = *((volatile unsigned long *)reg);
-	__asm__ __volatile__("mov %0, %0" : "+r" (dummy));
-}
-
-/*
- * Boards may multiplex different devices on the 2nd channel of 
- * the slowport interface that each need different configuration 
- * settings.  For example, the IXDP2400 uses channel 2 on the interface 
- * to access the CPLD, the switch fabric card, and the media card.  Each
- * one needs a different mode so drivers must save/restore the mode 
- * before and after each operation.  
- *
- * acquire_slowport(&your_config);
- * ...
- * do slowport operations
- * ...
- * release_slowport();
- *
- * Note that while you have the slowport, you are holding a spinlock,
- * so your code should be written as if you explicitly acquired a lock.
- *
- * The configuration only affects device 2 on the slowport, so the
- * MTD map driver does not acquire/release the slowport.  
- */
-struct slowport_cfg {
-	unsigned long CCR;	/* Clock divide */
-	unsigned long WTC;	/* Write Timing Control */
-	unsigned long RTC;	/* Read Timing Control */
-	unsigned long PCR;	/* Protocol Control Register */
-	unsigned long ADC;	/* Address/Data Width Control */
-};
-
-
-void ixp2000_acquire_slowport(struct slowport_cfg *, struct slowport_cfg *);
-void ixp2000_release_slowport(struct slowport_cfg *);
-
-/*
- * IXP2400 A0/A1 and  IXP2800 A0/A1/A2 have broken slowport that requires
- * tweaking of addresses in the MTD driver.
- */
-static inline unsigned ixp2000_has_broken_slowport(void)
-{
-	unsigned long id = *IXP2000_PRODUCT_ID;
-	unsigned long id_prod = id & (IXP2000_MAJ_PROD_TYPE_MASK |
-				      IXP2000_MIN_PROD_TYPE_MASK);
-	return (((id_prod ==
-		  /* fixed in IXP2400-B0 */
-		  (IXP2000_MAJ_PROD_TYPE_IXP2000 |
-		   IXP2000_MIN_PROD_TYPE_IXP2400)) &&
-		 ((id & IXP2000_MAJ_REV_MASK) == 0)) ||
-		((id_prod ==
-		  /* fixed in IXP2800-B0 */
-		  (IXP2000_MAJ_PROD_TYPE_IXP2000 |
-		   IXP2000_MIN_PROD_TYPE_IXP2800)) &&
-		 ((id & IXP2000_MAJ_REV_MASK) == 0)) ||
-		((id_prod ==
-		  /* fixed in IXP2850-B0 */
-		  (IXP2000_MAJ_PROD_TYPE_IXP2000 |
-		   IXP2000_MIN_PROD_TYPE_IXP2850)) &&
-		 ((id & IXP2000_MAJ_REV_MASK) == 0)));
-}
-
-static inline unsigned int ixp2000_has_flash(void)
-{
-	return ((*IXP2000_STRAP_OPTIONS) & (CFG_BOOT_PROM));
-}
-
-static inline unsigned int ixp2000_is_pcimaster(void)
-{
-	return ((*IXP2000_STRAP_OPTIONS) & (CFG_PCI_BOOT_HOST));
-}
-
-void ixp2000_map_io(void);
-void ixp2000_uart_init(void);
-void ixp2000_init_irq(void);
-void ixp2000_init_time(unsigned long);
-unsigned long ixp2000_gettimeoffset(void);
-
-struct pci_sys_data;
-
-u32 *ixp2000_pci_config_addr(unsigned int bus, unsigned int devfn, int where);
-void ixp2000_pci_preinit(void);
-int ixp2000_pci_setup(int, struct pci_sys_data*);
-struct pci_bus* ixp2000_pci_scan_bus(int, struct pci_sys_data*);
-int ixp2000_pci_read_config(struct pci_bus*, unsigned int, int, int, u32 *);
-int ixp2000_pci_write_config(struct pci_bus*, unsigned int, int, int, u32);
-
-/*
- * Several of the IXP2000 systems have banked flash so we need to extend the
- * flash_platform_data structure with some private pointers
- */
-struct ixp2000_flash_data {
-	struct flash_platform_data *platform_data;
-	int nr_banks;
-	unsigned long (*bank_setup)(unsigned long);
-};
-
-struct ixp2000_i2c_pins {
-	unsigned long sda_pin;
-	unsigned long scl_pin;
-};
-
-
-#endif /*  !__ASSEMBLY__ */
diff --git a/include/asm-arm/arch-ixp2000/system.h b/include/asm-arm/arch-ixp2000/system.h
deleted file mode 100644
index 3cc9a04f68cb..000000000000
--- a/include/asm-arm/arch-ixp2000/system.h
+++ /dev/null
@@ -1,49 +0,0 @@
-/*
- * linux/include/asm-arm/arch-ixp2000/system.h
- *
- * Copyright (C) 2002 Intel Corp.
- * Copyricht (C) 2003-2005 MontaVista Software, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <asm/hardware.h>
-#include <asm/mach-types.h>
-
-static inline void arch_idle(void)
-{
-	cpu_do_idle();
-}
-
-static inline void arch_reset(char mode)
-{
-	local_irq_disable();
-
-	/*
-	 * Reset flash banking register so that we are pointing at
-	 * RedBoot bank.
-	 */
-	if (machine_is_ixdp2401()) {
-		ixp2000_reg_write(IXDP2X01_CPLD_FLASH_REG,
-					((0 >> IXDP2X01_FLASH_WINDOW_BITS)
-						| IXDP2X01_CPLD_FLASH_INTERN));
-		ixp2000_reg_wrb(IXDP2X01_CPLD_RESET_REG, 0xffffffff);
-	}
-
-	/*
-	 * On IXDP2801 we need to write this magic sequence to the CPLD
-	 * to cause a complete reset of the CPU and all external devices
-	 * and move the flash bank register back to 0.
-	 */
-	if (machine_is_ixdp2801() || machine_is_ixdp28x5()) {
-		unsigned long reset_reg = *IXDP2X01_CPLD_RESET_REG;
-
-		reset_reg = 0x55AA0000 | (reset_reg & 0x0000FFFF);
-		ixp2000_reg_write(IXDP2X01_CPLD_RESET_REG, reset_reg);
-		ixp2000_reg_wrb(IXDP2X01_CPLD_RESET_REG, 0x80000000);
-	}
-
-	ixp2000_reg_wrb(IXP2000_RESET0, RSTALL);
-}
diff --git a/include/asm-arm/arch-ixp2000/timex.h b/include/asm-arm/arch-ixp2000/timex.h
deleted file mode 100644
index b78a183d4698..000000000000
--- a/include/asm-arm/arch-ixp2000/timex.h
+++ /dev/null
@@ -1,13 +0,0 @@
-/*
- * linux/include/asm-arm/arch-ixp2000/timex.h
- *
- * IXP2000 architecture timex specifications
- */
-
-
-/*
- * Default clock is 50MHz APB, but platform code can override this
- */
-#define CLOCK_TICK_RATE	50000000
-
-
diff --git a/include/asm-arm/arch-ixp2000/uncompress.h b/include/asm-arm/arch-ixp2000/uncompress.h
deleted file mode 100644
index f66b408f363e..000000000000
--- a/include/asm-arm/arch-ixp2000/uncompress.h
+++ /dev/null
@@ -1,47 +0,0 @@
-/*
- * linux/include/asm-arm/arch-ixp2000/uncompress.h
- *
- *
- * Original Author: Naeem Afzal <naeem.m.afzal@intel.com>
- * Maintainer: Deepak Saxena <dsaxena@plexity.net>
- *
- * Copyright 2002 Intel Corp.
- *
- *  This program is free software; you can redistribute  it and/or modify it
- *  under  the terms of  the GNU General  Public License as published by the
- *  Free Software Foundation;  either version 2 of the  License, or (at your
- *  option) any later version.
- *
- */
-
-#include <linux/serial_reg.h>
-
-#define UART_BASE	0xc0030000
-
-#define PHYS(x)          ((volatile unsigned long *)(UART_BASE + x))
-
-#define UARTDR          PHYS(0x00)      /* Transmit reg dlab=0 */
-#define UARTDLL         PHYS(0x00)      /* Divisor Latch reg dlab=1*/
-#define UARTDLM         PHYS(0x04)      /* Divisor Latch reg dlab=1*/
-#define UARTIER         PHYS(0x04)      /* Interrupt enable reg */
-#define UARTFCR         PHYS(0x08)      /* FIFO control reg dlab =0*/
-#define UARTLCR         PHYS(0x0c)      /* Control reg */
-#define UARTSR          PHYS(0x14)      /* Status reg */
-
-
-static inline void putc(int c)
-{
-	int j = 0x1000;
-
-	while (--j && !(*UARTSR & UART_LSR_THRE))
-		barrier();
-
-	*UARTDR = c;
-}
-
-static inline void flush(void)
-{
-}
-
-#define arch_decomp_setup()
-#define arch_decomp_wdog()
diff --git a/include/asm-arm/arch-ixp2000/vmalloc.h b/include/asm-arm/arch-ixp2000/vmalloc.h
deleted file mode 100644
index 275136963a0c..000000000000
--- a/include/asm-arm/arch-ixp2000/vmalloc.h
+++ /dev/null
@@ -1,20 +0,0 @@
-/*
- * linux/include/asm-arm/arch-ixp2000/vmalloc.h
- *
- * Author: Naeem Afzal <naeem.m.afzal@intel.com>
- *
- * Copyright 2002 Intel Corp.
- *
- *  This program is free software; you can redistribute  it and/or modify it
- *  under  the terms of  the GNU General  Public License as published by the
- *  Free Software Foundation;  either version 2 of the  License, or (at your
- *  option) any later version.
- *
- * Just any arbitrary offset to the start of the vmalloc VM area: the
- * current 8MB value just means that there will be a 8MB "hole" after the
- * physical memory until the kernel virtual memory starts.  That means that
- * any out-of-bounds memory accesses will hopefully be caught.
- * The vmalloc() routines leaves a hole of 4kB between each vmalloced
- * area for the same reason. ;)
- */
-#define VMALLOC_END	    0xfb000000
diff --git a/include/asm-arm/arch-ixp23xx/debug-macro.S b/include/asm-arm/arch-ixp23xx/debug-macro.S
deleted file mode 100644
index 2b25e640247d..000000000000
--- a/include/asm-arm/arch-ixp23xx/debug-macro.S
+++ /dev/null
@@ -1,26 +0,0 @@
-/*
- * include/asm-arm/arch-ixp23xx/debug-macro.S
- *
- * Debugging macro include header
- *
- * Copyright (C) 1994-1999 Russell King
- * Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#include <asm/arch/ixp23xx.h>
-
-		.macro	addruart,rx
-		mrc	p15, 0, \rx, c1, c0
-		tst	\rx, #1				@ mmu enabled?
-		ldreq	\rx, =IXP23XX_PERIPHERAL_PHYS 	@ physical
-		ldrne	\rx, =IXP23XX_PERIPHERAL_VIRT	@ virtual
-#ifdef __ARMEB__
-		orr	\rx, \rx, #0x00000003
-#endif
-		.endm
-
-#define UART_SHIFT	2
-#include <asm/hardware/debug-8250.S>
diff --git a/include/asm-arm/arch-ixp23xx/dma.h b/include/asm-arm/arch-ixp23xx/dma.h
deleted file mode 100644
index 2f4335e3b836..000000000000
--- a/include/asm-arm/arch-ixp23xx/dma.h
+++ /dev/null
@@ -1,3 +0,0 @@
-/*
- * include/asm-arm/arch-ixp23xx/dma.h
- */
diff --git a/include/asm-arm/arch-ixp23xx/entry-macro.S b/include/asm-arm/arch-ixp23xx/entry-macro.S
deleted file mode 100644
index ec9dd6fc2d0f..000000000000
--- a/include/asm-arm/arch-ixp23xx/entry-macro.S
+++ /dev/null
@@ -1,37 +0,0 @@
-/*
- * include/asm-arm/arch-ixp23xx/entry-macro.S
- */
-
-		.macro	disable_fiq
-		.endm
-
-		.macro  get_irqnr_preamble, base, tmp
-		.endm
-
-		.macro  arch_ret_to_user, tmp1, tmp2
-		.endm
-
-		.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
-		ldr	\irqnr, =(IXP23XX_INTC_VIRT + IXP23XX_INTR_IRQ_ENC_ST_OFFSET)
-		ldr	\irqnr, [\irqnr]	@ get interrupt number
-		cmp	\irqnr, #0x0		@ spurious interrupt ?
-		movne	\irqnr, \irqnr, lsr #2	@ skip unwanted low order bits
-		subne	\irqnr, \irqnr, #1	@ convert to 0 based
-
-#if 0
-		cmp	\irqnr, #IRQ_IXP23XX_PCI_INT_RPH
-		bne	1001f
-		mov	\irqnr, #IRQ_IXP23XX_INTA
-
-		ldr	\irqnr, =0xf5000030
-
-		mov	\tmp, #(1<<26)
-		tst	\irqnr, \tmp
-		movne	\irqnr, #IRQ_IXP23XX_INTB
-
-		mov	\tmp, #(1<<27)
-		tst	\irqnr, \tmp
-		movne	\irqnr, #IRQ_IXP23XX_INTA
-1001:
-#endif
-		.endm
diff --git a/include/asm-arm/arch-ixp23xx/hardware.h b/include/asm-arm/arch-ixp23xx/hardware.h
deleted file mode 100644
index c0010d21a684..000000000000
--- a/include/asm-arm/arch-ixp23xx/hardware.h
+++ /dev/null
@@ -1,37 +0,0 @@
-/*
- * include/asm-arm/arch-ixp23xx/hardware.h
- *
- * Copyright (C) 2002-2004 Intel Corporation.
- * Copyricht (C) 2005 MontaVista Software, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * Hardware definitions for IXP23XX based systems
- */
-
-#ifndef __ASM_ARCH_HARDWARE_H
-#define __ASM_ARCH_HARDWARE_H
-
-/* PCI IO info */
-#define PCIO_BASE		IXP23XX_PCI_IO_VIRT
-#define PCIBIOS_MIN_IO		0x00000000
-#define PCIBIOS_MIN_MEM		0xe0000000
-
-#include "ixp23xx.h"
-
-#define pcibios_assign_all_busses()	0
-
-/*
- * Platform helper functions
- */
-#include "platform.h"
-
-/*
- * Platform-specific headers
- */
-#include "ixdp2351.h"
-
-
-#endif
diff --git a/include/asm-arm/arch-ixp23xx/io.h b/include/asm-arm/arch-ixp23xx/io.h
deleted file mode 100644
index 66f5bafc315c..000000000000
--- a/include/asm-arm/arch-ixp23xx/io.h
+++ /dev/null
@@ -1,54 +0,0 @@
-/*
- * include/asm-arm/arch-ixp23xx/io.h
- *
- * Original Author: Naeem M Afzal <naeem.m.afzal@intel.com>
- * Maintainer: Deepak Saxena <dsaxena@plexity.net>
- *
- * Copyright (C) 2003-2005 Intel Corp.
- * Copyright (C) 2005 MontaVista Software, Inc
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ASM_ARCH_IO_H
-#define __ASM_ARCH_IO_H
-
-#define IO_SPACE_LIMIT 0xffffffff
-
-#define __io(p)		((void __iomem*)((p) + IXP23XX_PCI_IO_VIRT))
-#define __mem_pci(a)	(a)
-
-#include <linux/kernel.h>	/* For BUG */
-
-static inline void __iomem *
-ixp23xx_ioremap(unsigned long addr, unsigned long size, unsigned int mtype)
-{
-	if (addr >= IXP23XX_PCI_MEM_START &&
-		addr <= IXP23XX_PCI_MEM_START + IXP23XX_PCI_MEM_SIZE) {
-		if (addr + size > IXP23XX_PCI_MEM_START + IXP23XX_PCI_MEM_SIZE)
-			return NULL;
-
-		return (void __iomem *)
- 			((addr - IXP23XX_PCI_MEM_START) + IXP23XX_PCI_MEM_VIRT);
-	}
-
-	return __arm_ioremap(addr, size, mtype);
-}
-
-static inline void
-ixp23xx_iounmap(void __iomem *addr)
-{
-	if ((((u32)addr) >= IXP23XX_PCI_MEM_VIRT) &&
-	    (((u32)addr) < IXP23XX_PCI_MEM_VIRT + IXP23XX_PCI_MEM_SIZE))
-		return;
-
-	__iounmap(addr);
-}
-
-#define __arch_ioremap(a,s,f)	ixp23xx_ioremap(a,s,f)
-#define __arch_iounmap(a)	ixp23xx_iounmap(a)
-
-
-#endif
diff --git a/include/asm-arm/arch-ixp23xx/irqs.h b/include/asm-arm/arch-ixp23xx/irqs.h
deleted file mode 100644
index 27c580898958..000000000000
--- a/include/asm-arm/arch-ixp23xx/irqs.h
+++ /dev/null
@@ -1,223 +0,0 @@
-/*
- * include/asm-arm/arch-ixp23xx/irqs.h
- *
- * IRQ definitions for IXP23XX based systems
- *
- * Author: Naeem Afzal <naeem.m.afzal@intel.com>
- *
- * Copyright (C) 2003-2004 Intel Corporation.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ASM_ARCH_IRQS_H
-#define __ASM_ARCH_IRQS_H
-
-#define NR_IXP23XX_IRQS			IRQ_IXP23XX_INTB+1
-#define IRQ_IXP23XX_EXTIRQS		NR_IXP23XX_IRQS
-
-
-#define IRQ_IXP23XX_DBG0		0	/* Debug/Execution/MBox */
-#define IRQ_IXP23XX_DBG1		1	/* Debug/Execution/MBox */
-#define IRQ_IXP23XX_NPE_TRG		2	/* npe_trigger */
-#define IRQ_IXP23XX_TIMER1		3	/* Timer[0] */
-#define IRQ_IXP23XX_TIMER2		4	/* Timer[1] */
-#define IRQ_IXP23XX_TIMESTAMP		5	/* Timer[2], Time-stamp */
-#define IRQ_IXP23XX_WDOG		6	/* Time[3], Watchdog Timer */
-#define IRQ_IXP23XX_PCI_DBELL		7	/* PCI Doorbell */
-#define IRQ_IXP23XX_PCI_DMA1		8	/* PCI DMA Channel 1 */
-#define IRQ_IXP23XX_PCI_DMA2		9	/* PCI DMA Channel 2 */
-#define IRQ_IXP23XX_PCI_DMA3		10	/* PCI DMA Channel 3 */
-#define IRQ_IXP23XX_PCI_INT_RPH		11	/* pcxg_pci_int_rph */
-#define IRQ_IXP23XX_CPP_PMU		12	/* xpxg_pm_int_rpl */
-#define IRQ_IXP23XX_SWINT0		13	/* S/W Interrupt0 */
-#define IRQ_IXP23XX_SWINT1		14	/* S/W Interrupt1 */
-#define IRQ_IXP23XX_UART2		15	/* UART1 Interrupt */
-#define IRQ_IXP23XX_UART1		16	/* UART0 Interrupt */
-#define IRQ_IXP23XX_XSI_PMU_ROLLOVER	17	/* AHB Performance M. Unit counter rollover */
-#define IRQ_IXP23XX_XSI_AHB_PM0		18	/* intr_pm_o */
-#define IRQ_IXP23XX_XSI_AHB_ECE0	19	/* intr_ece_o */
-#define IRQ_IXP23XX_XSI_AHB_GASKET	20	/* gas_intr_o */
-#define IRQ_IXP23XX_XSI_CPP		21	/* xsi2cpp_int */
-#define IRQ_IXP23XX_CPP_XSI		22	/* cpp2xsi_int */
-#define IRQ_IXP23XX_ME_ATTN0		23	/* ME_ATTN */
-#define IRQ_IXP23XX_ME_ATTN1		24	/* ME_ATTN */
-#define IRQ_IXP23XX_ME_ATTN2		25	/* ME_ATTN */
-#define IRQ_IXP23XX_ME_ATTN3		26	/* ME_ATTN */
-#define IRQ_IXP23XX_PCI_ERR_RPH		27	/* PCXG_PCI_ERR_RPH */
-#define IRQ_IXP23XX_D0XG_ECC_CORR	28	/* D0XG_DRAM_ECC_CORR */
-#define IRQ_IXP23XX_D0XG_ECC_UNCORR	29	/* D0XG_DRAM_ECC_UNCORR */
-#define IRQ_IXP23XX_SRAM_ERR1		30	/* SRAM1_ERR */
-#define IRQ_IXP23XX_SRAM_ERR0		31	/* SRAM0_ERR */
-#define IRQ_IXP23XX_MEDIA_ERR		32	/* MEDIA_ERR */
-#define IRQ_IXP23XX_STH_DRAM_ECC_MAJ	33	/* STH_DRAM0_ECC_MAJ */
-#define IRQ_IXP23XX_GPIO6		34	/* GPIO0 interrupts */
-#define IRQ_IXP23XX_GPIO7		35	/* GPIO1 interrupts */
-#define IRQ_IXP23XX_GPIO8		36	/* GPIO2 interrupts */
-#define IRQ_IXP23XX_GPIO9		37	/* GPIO3 interrupts */
-#define IRQ_IXP23XX_GPIO10		38	/* GPIO4 interrupts */
-#define IRQ_IXP23XX_GPIO11		39	/* GPIO5 interrupts */
-#define IRQ_IXP23XX_GPIO12		40	/* GPIO6 interrupts */
-#define IRQ_IXP23XX_GPIO13		41	/* GPIO7 interrupts */
-#define IRQ_IXP23XX_GPIO14		42	/* GPIO8 interrupts */
-#define IRQ_IXP23XX_GPIO15		43	/* GPIO9 interrupts */
-#define IRQ_IXP23XX_SHAC_RING0		44	/* SHAC Ring Full */
-#define IRQ_IXP23XX_SHAC_RING1		45	/* SHAC Ring Full */
-#define IRQ_IXP23XX_SHAC_RING2		46	/* SHAC Ring Full */
-#define IRQ_IXP23XX_SHAC_RING3		47	/* SHAC Ring Full */
-#define IRQ_IXP23XX_SHAC_RING4		48	/* SHAC Ring Full */
-#define IRQ_IXP23XX_SHAC_RING5		49	/* SHAC Ring Full */
-#define IRQ_IXP23XX_SHAC_RING6		50	/* SHAC RING Full */
-#define IRQ_IXP23XX_SHAC_RING7		51	/* SHAC Ring Full */
-#define IRQ_IXP23XX_SHAC_RING8		52	/* SHAC Ring Full */
-#define IRQ_IXP23XX_SHAC_RING9		53	/* SHAC Ring Full */
-#define IRQ_IXP23XX_SHAC_RING10		54	/* SHAC Ring Full */
-#define IRQ_IXP23XX_SHAC_RING11		55	/* SHAC Ring Full */
-#define IRQ_IXP23XX_ME_THREAD_A0_ME0	56	/* ME_THREAD_A */
-#define IRQ_IXP23XX_ME_THREAD_A1_ME0	57	/* ME_THREAD_A */
-#define IRQ_IXP23XX_ME_THREAD_A2_ME0	58	/* ME_THREAD_A */
-#define IRQ_IXP23XX_ME_THREAD_A3_ME0	59	/* ME_THREAD_A */
-#define IRQ_IXP23XX_ME_THREAD_A4_ME0	60	/* ME_THREAD_A */
-#define IRQ_IXP23XX_ME_THREAD_A5_ME0	61	/* ME_THREAD_A */
-#define IRQ_IXP23XX_ME_THREAD_A6_ME0	62	/* ME_THREAD_A */
-#define IRQ_IXP23XX_ME_THREAD_A7_ME0	63	/* ME_THREAD_A */
-#define IRQ_IXP23XX_ME_THREAD_A8_ME1	64	/* ME_THREAD_A */
-#define IRQ_IXP23XX_ME_THREAD_A9_ME1	65	/* ME_THREAD_A */
-#define IRQ_IXP23XX_ME_THREAD_A10_ME1	66	/* ME_THREAD_A */
-#define IRQ_IXP23XX_ME_THREAD_A11_ME1	67	/* ME_THREAD_A */
-#define IRQ_IXP23XX_ME_THREAD_A12_ME1	68	/* ME_THREAD_A */
-#define IRQ_IXP23XX_ME_THREAD_A13_ME1	69	/* ME_THREAD_A */
-#define IRQ_IXP23XX_ME_THREAD_A14_ME1	70	/* ME_THREAD_A */
-#define IRQ_IXP23XX_ME_THREAD_A15_ME1	71	/* ME_THREAD_A */
-#define IRQ_IXP23XX_ME_THREAD_A16_ME2	72	/* ME_THREAD_A */
-#define IRQ_IXP23XX_ME_THREAD_A17_ME2	73	/* ME_THREAD_A */
-#define IRQ_IXP23XX_ME_THREAD_A18_ME2	74	/* ME_THREAD_A */
-#define IRQ_IXP23XX_ME_THREAD_A19_ME2	75	/* ME_THREAD_A */
-#define IRQ_IXP23XX_ME_THREAD_A20_ME2	76	/* ME_THREAD_A */
-#define IRQ_IXP23XX_ME_THREAD_A21_ME2	77	/* ME_THREAD_A */
-#define IRQ_IXP23XX_ME_THREAD_A22_ME2	78	/* ME_THREAD_A */
-#define IRQ_IXP23XX_ME_THREAD_A23_ME2	79	/* ME_THREAD_A */
-#define IRQ_IXP23XX_ME_THREAD_A24_ME3	80	/* ME_THREAD_A */
-#define IRQ_IXP23XX_ME_THREAD_A25_ME3	81	/* ME_THREAD_A */
-#define IRQ_IXP23XX_ME_THREAD_A26_ME3	82	/* ME_THREAD_A */
-#define IRQ_IXP23XX_ME_THREAD_A27_ME3	83	/* ME_THREAD_A */
-#define IRQ_IXP23XX_ME_THREAD_A28_ME3	84	/* ME_THREAD_A */
-#define IRQ_IXP23XX_ME_THREAD_A29_ME3	85	/* ME_THREAD_A */
-#define IRQ_IXP23XX_ME_THREAD_A30_ME3	86	/* ME_THREAD_A */
-#define IRQ_IXP23XX_ME_THREAD_A31_ME3	87	/* ME_THREAD_A */
-#define IRQ_IXP23XX_ME_THREAD_B0_ME0	88	/* ME_THREAD_B */
-#define IRQ_IXP23XX_ME_THREAD_B1_ME0	89	/* ME_THREAD_B */
-#define IRQ_IXP23XX_ME_THREAD_B2_ME0	90	/* ME_THREAD_B */
-#define IRQ_IXP23XX_ME_THREAD_B3_ME0	91	/* ME_THREAD_B */
-#define IRQ_IXP23XX_ME_THREAD_B4_ME0	92	/* ME_THREAD_B */
-#define IRQ_IXP23XX_ME_THREAD_B5_ME0	93	/* ME_THREAD_B */
-#define IRQ_IXP23XX_ME_THREAD_B6_ME0	94	/* ME_THREAD_B */
-#define IRQ_IXP23XX_ME_THREAD_B7_ME0	95	/* ME_THREAD_B */
-#define IRQ_IXP23XX_ME_THREAD_B8_ME1	96	/* ME_THREAD_B */
-#define IRQ_IXP23XX_ME_THREAD_B9_ME1	97	/* ME_THREAD_B */
-#define IRQ_IXP23XX_ME_THREAD_B10_ME1	98	/* ME_THREAD_B */
-#define IRQ_IXP23XX_ME_THREAD_B11_ME1	99	/* ME_THREAD_B */
-#define IRQ_IXP23XX_ME_THREAD_B12_ME1	100	/* ME_THREAD_B */
-#define IRQ_IXP23XX_ME_THREAD_B13_ME1	101	/* ME_THREAD_B */
-#define IRQ_IXP23XX_ME_THREAD_B14_ME1	102	/* ME_THREAD_B */
-#define IRQ_IXP23XX_ME_THREAD_B15_ME1	103	/* ME_THREAD_B */
-#define IRQ_IXP23XX_ME_THREAD_B16_ME2	104	/* ME_THREAD_B */
-#define IRQ_IXP23XX_ME_THREAD_B17_ME2	105	/* ME_THREAD_B */
-#define IRQ_IXP23XX_ME_THREAD_B18_ME2	106	/* ME_THREAD_B */
-#define IRQ_IXP23XX_ME_THREAD_B19_ME2	107	/* ME_THREAD_B */
-#define IRQ_IXP23XX_ME_THREAD_B20_ME2	108	/* ME_THREAD_B */
-#define IRQ_IXP23XX_ME_THREAD_B21_ME2	109	/* ME_THREAD_B */
-#define IRQ_IXP23XX_ME_THREAD_B22_ME2	110	/* ME_THREAD_B */
-#define IRQ_IXP23XX_ME_THREAD_B23_ME2	111	/* ME_THREAD_B */
-#define IRQ_IXP23XX_ME_THREAD_B24_ME3	112	/* ME_THREAD_B */
-#define IRQ_IXP23XX_ME_THREAD_B25_ME3	113	/* ME_THREAD_B */
-#define IRQ_IXP23XX_ME_THREAD_B26_ME3	114	/* ME_THREAD_B */
-#define IRQ_IXP23XX_ME_THREAD_B27_ME3	115	/* ME_THREAD_B */
-#define IRQ_IXP23XX_ME_THREAD_B28_ME3	116	/* ME_THREAD_B */
-#define IRQ_IXP23XX_ME_THREAD_B29_ME3	117	/* ME_THREAD_B */
-#define IRQ_IXP23XX_ME_THREAD_B30_ME3	118	/* ME_THREAD_B */
-#define IRQ_IXP23XX_ME_THREAD_B31_ME3	119	/* ME_THREAD_B */
-
-#define NUM_IXP23XX_RAW_IRQS		120
-
-#define IRQ_IXP23XX_INTA		120	/* Indirect pcxg_pci_int_rph */
-#define IRQ_IXP23XX_INTB		121	/* Indirect pcxg_pci_int_rph */
-
-#define NR_IXP23XX_IRQ			(IRQ_IXP23XX_INTB + 1)
-
-/*
- * We default to 32 per-board IRQs. Increase this number if you need
- * more, but keep it realistic.
- */
-#define NR_IXP23XX_MACH_IRQS 		32
-
-#define NR_IRQS				(NR_IXP23XX_IRQS + NR_IXP23XX_MACH_IRQS)
-
-#define IXP23XX_MACH_IRQ(irq) 		(NR_IXP23XX_IRQ + (irq))
-
-
-/*
- * IXDP2351-specific interrupts
- */
-
-/*
- * External PCI interrupts signaled through INTB
- *
- */
-#define IXDP2351_INTB_IRQ_BASE 		0
-#define IRQ_IXDP2351_INTA_82546		IXP23XX_MACH_IRQ(0)
-#define IRQ_IXDP2351_INTB_82546		IXP23XX_MACH_IRQ(1)
-#define IRQ_IXDP2351_SPCI_DB_0		IXP23XX_MACH_IRQ(2)
-#define IRQ_IXDP2351_SPCI_DB_1		IXP23XX_MACH_IRQ(3)
-#define IRQ_IXDP2351_SPCI_PMC_INTA	IXP23XX_MACH_IRQ(4)
-#define IRQ_IXDP2351_SPCI_PMC_INTB	IXP23XX_MACH_IRQ(5)
-#define IRQ_IXDP2351_SPCI_PMC_INTC	IXP23XX_MACH_IRQ(6)
-#define IRQ_IXDP2351_SPCI_PMC_INTD	IXP23XX_MACH_IRQ(7)
-#define IRQ_IXDP2351_SPCI_FIC		IXP23XX_MACH_IRQ(8)
-
-#define IXDP2351_INTB_IRQ_BIT(irq)	(irq - IXP23XX_MACH_IRQ(0))
-#define IXDP2351_INTB_IRQ_MASK(irq)	(1 << IXDP2351_INTB_IRQ_BIT(irq))
-#define IXDP2351_INTB_IRQ_VALID		0x01FF
-#define IXDP2351_INTB_IRQ_NUM 		16
-
-/*
- * Other external interrupts signaled through INTA
- */
-#define IXDP2351_INTA_IRQ_BASE 		16
-#define IRQ_IXDP2351_IPMI_FROM		IXP23XX_MACH_IRQ(16)
-#define IRQ_IXDP2351_125US		IXP23XX_MACH_IRQ(17)
-#define IRQ_IXDP2351_DB_0_ADD		IXP23XX_MACH_IRQ(18)
-#define IRQ_IXDP2351_DB_1_ADD		IXP23XX_MACH_IRQ(19)
-#define IRQ_IXDP2351_DEBUG1		IXP23XX_MACH_IRQ(20)
-#define IRQ_IXDP2351_ADD_UART		IXP23XX_MACH_IRQ(21)
-#define IRQ_IXDP2351_FIC_ADD		IXP23XX_MACH_IRQ(24)
-#define IRQ_IXDP2351_CS8900		IXP23XX_MACH_IRQ(25)
-#define IRQ_IXDP2351_BBSRAM		IXP23XX_MACH_IRQ(26)
-#define IRQ_IXDP2351_CONFIG_MEDIA	IXP23XX_MACH_IRQ(27)
-#define IRQ_IXDP2351_CLOCK_REF		IXP23XX_MACH_IRQ(28)
-#define IRQ_IXDP2351_A10_NP		IXP23XX_MACH_IRQ(29)
-#define IRQ_IXDP2351_A11_NP		IXP23XX_MACH_IRQ(30)
-#define IRQ_IXDP2351_DEBUG_NP		IXP23XX_MACH_IRQ(31)
-
-#define IXDP2351_INTA_IRQ_BIT(irq) 	(irq - IXP23XX_MACH_IRQ(16))
-#define IXDP2351_INTA_IRQ_MASK(irq) 	(1 << IXDP2351_INTA_IRQ_BIT(irq))
-#define IXDP2351_INTA_IRQ_VALID 	0xFF3F
-#define IXDP2351_INTA_IRQ_NUM 		16
-
-
-/*
- * ADI RoadRunner IRQs
- */
-#define IRQ_ROADRUNNER_PCI_INTA 	IRQ_IXP23XX_INTA
-#define IRQ_ROADRUNNER_PCI_INTB 	IRQ_IXP23XX_INTB
-#define IRQ_ROADRUNNER_PCI_INTC 	IRQ_IXP23XX_GPIO11
-#define IRQ_ROADRUNNER_PCI_INTD 	IRQ_IXP23XX_GPIO12
-
-/*
- * Put new board definitions here
- */
-
-
-#endif
diff --git a/include/asm-arm/arch-ixp23xx/memory.h b/include/asm-arm/arch-ixp23xx/memory.h
deleted file mode 100644
index 6d859d742d7f..000000000000
--- a/include/asm-arm/arch-ixp23xx/memory.h
+++ /dev/null
@@ -1,49 +0,0 @@
-/*
- * include/asm-arm/arch-ixp23xx/memory.h
- *
- * Copyright (c) 2003-2004 Intel Corp.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- */
-
-#ifndef __ASM_ARCH_MEMORY_H
-#define __ASM_ARCH_MEMORY_H
-
-#include <asm/hardware.h>
-
-/*
- * Physical DRAM offset.
- */
-#define PHYS_OFFSET		(0x00000000)
-
-
-/*
- * Virtual view <-> DMA view memory address translations
- * virt_to_bus: Used to translate the virtual address to an
- *		address suitable to be passed to set_dma_addr
- * bus_to_virt: Used to convert an address for DMA operations
- *		to an address that the kernel can use.
- */
-#ifndef __ASSEMBLY__
-#include <asm/mach-types.h>
-
-#define __virt_to_bus(v)						\
-	({ unsigned int ret;						\
-	ret = ((__virt_to_phys(v) - 0x00000000) +			\
-	 (*((volatile int *)IXP23XX_PCI_SDRAM_BAR) & 0xfffffff0)); 	\
-	ret; })
-
-#define __bus_to_virt(b)						\
-	({ unsigned int data;						\
-	data = *((volatile int *)IXP23XX_PCI_SDRAM_BAR);		\
-	 __phys_to_virt((((b - (data & 0xfffffff0)) + 0x00000000))); })
-
-#define arch_is_coherent()	1
-
-#endif
-
-
-#endif
diff --git a/include/asm-arm/arch-ixp23xx/platform.h b/include/asm-arm/arch-ixp23xx/platform.h
deleted file mode 100644
index db8aa304c93d..000000000000
--- a/include/asm-arm/arch-ixp23xx/platform.h
+++ /dev/null
@@ -1,57 +0,0 @@
-/*
- * include/asm-arm/arch-ixp23xx/platform.h
- *
- * Various bits of code used by platform-level code.
- *
- * Author: Deepak Saxena <dsaxena@plexity.net>
- *
- * Copyright 2005 (c) MontaVista Software, Inc.
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __ASSEMBLY__
-
-static inline unsigned long ixp2000_reg_read(volatile void *reg)
-{
-	return *((volatile unsigned long *)reg);
-}
-
-static inline void ixp2000_reg_write(volatile void *reg, unsigned long val)
-{
-	*((volatile unsigned long *)reg) = val;
-}
-
-static inline void ixp2000_reg_wrb(volatile void *reg, unsigned long val)
-{
-	*((volatile unsigned long *)reg) = val;
-}
-
-struct pci_sys_data;
-
-void ixp23xx_map_io(void);
-void ixp23xx_init_irq(void);
-void ixp23xx_sys_init(void);
-int ixp23xx_pci_setup(int, struct pci_sys_data *);
-void ixp23xx_pci_preinit(void);
-struct pci_bus *ixp23xx_pci_scan_bus(int, struct pci_sys_data*);
-void ixp23xx_pci_slave_init(void);
-
-extern struct sys_timer ixp23xx_timer;
-
-#define IXP23XX_UART_XTAL		14745600
-
-#ifndef __ASSEMBLY__
-/*
- * Is system memory on the XSI or CPP bus?
- */
-static inline unsigned ixp23xx_cpp_boot(void)
-{
-	return (*IXP23XX_EXP_CFG0 & IXP23XX_EXP_CFG0_XSI_NOT_PRES);
-}
-#endif
-
-
-#endif
diff --git a/include/asm-arm/arch-ixp23xx/system.h b/include/asm-arm/arch-ixp23xx/system.h
deleted file mode 100644
index 925e6b0c338b..000000000000
--- a/include/asm-arm/arch-ixp23xx/system.h
+++ /dev/null
@@ -1,33 +0,0 @@
-/*
- * include/asm-arm/arch-ixp23xx/system.h
- *
- * Copyright (C) 2003 Intel Corporation.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <asm/hardware.h>
-#include <asm/mach-types.h>
-
-static inline void arch_idle(void)
-{
-#if 0
-	if (!hlt_counter)
-		cpu_do_idle();
-#endif
-}
-
-static inline void arch_reset(char mode)
-{
-	/* First try machine specific support */
-	if (machine_is_ixdp2351()) {
-		*IXDP2351_CPLD_RESET1_REG = IXDP2351_CPLD_RESET1_MAGIC;
-		(void) *IXDP2351_CPLD_RESET1_REG;
-		*IXDP2351_CPLD_RESET1_REG = IXDP2351_CPLD_RESET1_ENABLE;
-	}
-
-	/* Use on-chip reset capability */
-	*IXP23XX_RESET0 |= IXP23XX_RST_ALL;
-}
diff --git a/include/asm-arm/arch-ixp23xx/time.h b/include/asm-arm/arch-ixp23xx/time.h
deleted file mode 100644
index f6828fdd2883..000000000000
--- a/include/asm-arm/arch-ixp23xx/time.h
+++ /dev/null
@@ -1,3 +0,0 @@
-/*
- * include/asm-arm/arch-ixp23xx/time.h
- */
diff --git a/include/asm-arm/arch-ixp23xx/timex.h b/include/asm-arm/arch-ixp23xx/timex.h
deleted file mode 100644
index 516f72fe6082..000000000000
--- a/include/asm-arm/arch-ixp23xx/timex.h
+++ /dev/null
@@ -1,7 +0,0 @@
-/*
- * include/asm-arm/arch-ixp23xx/timex.h
- *
- * XScale architecture timex specifications
- */
-
-#define CLOCK_TICK_RATE 75000000
diff --git a/include/asm-arm/arch-ixp23xx/uncompress.h b/include/asm-arm/arch-ixp23xx/uncompress.h
deleted file mode 100644
index 16c1110f2304..000000000000
--- a/include/asm-arm/arch-ixp23xx/uncompress.h
+++ /dev/null
@@ -1,40 +0,0 @@
-/*
- * include/asm-arm/arch-ixp23xx/uncompress.h
- *
- * Copyright (C) 2002-2004 Intel Corporation.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ASM_ARCH_UNCOMPRESS_H
-#define __ASM_ARCH_UNCOMPRESS_H
-
-#include <asm/arch/ixp23xx.h>
-#include <linux/serial_reg.h>
-
-#define UART_BASE	((volatile u32 *)IXP23XX_UART1_PHYS)
-
-static inline void putc(char c)
-{
-	int j;
-
-	for (j = 0; j < 0x1000; j++) {
-		if (UART_BASE[UART_LSR] & UART_LSR_THRE)
-			break;
-		barrier();
-	}
-
-	UART_BASE[UART_TX] = c;
-}
-
-static inline void flush(void)
-{
-}
-
-#define arch_decomp_setup()
-#define arch_decomp_wdog()
-
-
-#endif
diff --git a/include/asm-arm/arch-ixp23xx/vmalloc.h b/include/asm-arm/arch-ixp23xx/vmalloc.h
deleted file mode 100644
index 9f2566658541..000000000000
--- a/include/asm-arm/arch-ixp23xx/vmalloc.h
+++ /dev/null
@@ -1,10 +0,0 @@
-/*
- * include/asm-arm/arch-ixp23xx/vmalloc.h
- *
- * Copyright (c) 2005 MontaVista Software, Inc.
- *
- * NPU mappings end at 0xf0000000 and we allocate 64MB for board
- * specific static I/O.
- */
-
-#define VMALLOC_END	(0xec000000)
diff --git a/include/asm-arm/arch-ixp4xx/cpu.h b/include/asm-arm/arch-ixp4xx/cpu.h
deleted file mode 100644
index 2fa3d6b8dbb8..000000000000
--- a/include/asm-arm/arch-ixp4xx/cpu.h
+++ /dev/null
@@ -1,46 +0,0 @@
-/*
- * include/asm-arm/arch-ixp4xx/cpu.h
- *
- * IXP4XX cpu type detection
- *
- * Copyright (C) 2007 MontaVista Software, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-
-#ifndef __ASM_ARCH_CPU_H__
-#define __ASM_ARCH_CPU_H__
-
-extern unsigned int processor_id;
-/* Processor id value in CP15 Register 0 */
-#define IXP425_PROCESSOR_ID_VALUE	0x690541c0
-#define IXP435_PROCESSOR_ID_VALUE	0x69054040
-#define IXP465_PROCESSOR_ID_VALUE	0x69054200
-#define IXP4XX_PROCESSOR_ID_MASK	0xfffffff0
-
-#define cpu_is_ixp42x()	((processor_id & IXP4XX_PROCESSOR_ID_MASK) == \
-			  IXP425_PROCESSOR_ID_VALUE)
-#define cpu_is_ixp43x()	((processor_id & IXP4XX_PROCESSOR_ID_MASK) == \
-			  IXP435_PROCESSOR_ID_VALUE)
-#define cpu_is_ixp46x()	((processor_id & IXP4XX_PROCESSOR_ID_MASK) == \
-			  IXP465_PROCESSOR_ID_VALUE)
-
-static inline u32 ixp4xx_read_feature_bits(void)
-{
-	unsigned int val = ~*IXP4XX_EXP_CFG2;
-	val &= ~IXP4XX_FEATURE_RESERVED;
-	if (!cpu_is_ixp46x())
-		val &= ~IXP4XX_FEATURE_IXP46X_ONLY;
-
-	return val;
-}
-
-static inline void ixp4xx_write_feature_bits(u32 value)
-{
-	*IXP4XX_EXP_CFG2 = ~value;
-}
-
-#endif  /* _ASM_ARCH_CPU_H */
diff --git a/include/asm-arm/arch-ixp4xx/debug-macro.S b/include/asm-arm/arch-ixp4xx/debug-macro.S
deleted file mode 100644
index 37bc8ef23e67..000000000000
--- a/include/asm-arm/arch-ixp4xx/debug-macro.S
+++ /dev/null
@@ -1,24 +0,0 @@
-/* linux/include/asm-arm/arch-ixp4xx/debug-macro.S
- *
- * Debugging macro include header
- *
- *  Copyright (C) 1994-1999 Russell King
- *  Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-                .macro  addruart,rx
-                mrc     p15, 0, \rx, c1, c0
-                tst     \rx, #1                 @ MMU enabled?
-                moveq   \rx, #0xc8000000
-                movne   \rx, #0xff000000
-		orrne	\rx, \rx, #0x00b00000
-                add     \rx,\rx,#3              @ Uart regs are at off set of 3 if
-						@ byte writes used - Big Endian.
-                .endm
-
-#define UART_SHIFT	2
-#include <asm/hardware/debug-8250.S>
diff --git a/include/asm-arm/arch-ixp4xx/dma.h b/include/asm-arm/arch-ixp4xx/dma.h
deleted file mode 100644
index 2c7f5327d80f..000000000000
--- a/include/asm-arm/arch-ixp4xx/dma.h
+++ /dev/null
@@ -1,21 +0,0 @@
-/*
- * include/asm-arm/arch-ixp4xx/dma.h
- *
- * Copyright (C) 2001-2004 MontaVista Software, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-#ifndef __ASM_ARCH_DMA_H
-#define __ASM_ARCH_DMA_H
-
-#include <linux/device.h>
-#include <asm/page.h>
-#include <asm/sizes.h>
-#include <asm/hardware.h>
-
-#define MAX_DMA_ADDRESS		(PAGE_OFFSET + SZ_64M)
-
-#endif /* _ASM_ARCH_DMA_H */
diff --git a/include/asm-arm/arch-ixp4xx/entry-macro.S b/include/asm-arm/arch-ixp4xx/entry-macro.S
deleted file mode 100644
index f144a005ed95..000000000000
--- a/include/asm-arm/arch-ixp4xx/entry-macro.S
+++ /dev/null
@@ -1,47 +0,0 @@
-/*
- * include/asm-arm/arch-ixp4xx/entry-macro.S
- *
- * Low-level IRQ helper macros for IXP4xx-based platforms
- *
- * This file is licensed under  the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-#include <asm/hardware.h>
-
-		.macro	disable_fiq
-		.endm
-
-		.macro  get_irqnr_preamble, base, tmp
-		.endm
-
-		.macro  arch_ret_to_user, tmp1, tmp2
-		.endm
-
-		.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
-		ldr	\irqstat, =(IXP4XX_INTC_BASE_VIRT+IXP4XX_ICIP_OFFSET)
-		ldr	\irqstat, [\irqstat]		@ get interrupts
-		cmp	\irqstat, #0
-		beq	1001f				@ upper IRQ?
-		clz     \irqnr, \irqstat
-		mov     \base, #31
-		sub     \irqnr, \base, \irqnr
-		b	1002f				@ lower IRQ being
-							@ handled
-
-1001:
-		/*
-		 * IXP465/IXP435 has an upper IRQ status register
-		 */
-#if defined(CONFIG_CPU_IXP46X) || defined(CONFIG_CPU_IXP43X)
-		ldr	\irqstat, =(IXP4XX_INTC_BASE_VIRT+IXP4XX_ICIP2_OFFSET)
-		ldr	\irqstat, [\irqstat]		@ get upper interrupts
-		mov	\irqnr, #63
-		clz	\irqstat, \irqstat
- 		cmp	\irqstat, #32
-		subne	\irqnr, \irqnr, \irqstat
-#endif
-1002:
-		.endm
-
-
diff --git a/include/asm-arm/arch-ixp4xx/gpio.h b/include/asm-arm/arch-ixp4xx/gpio.h
deleted file mode 100644
index 3a4c5b8ae9e1..000000000000
--- a/include/asm-arm/arch-ixp4xx/gpio.h
+++ /dev/null
@@ -1,73 +0,0 @@
-/*
- * linux/include/asm-arm/arch-ixp4xx/gpio.h
- *
- * IXP4XX GPIO wrappers for arch-neutral GPIO calls
- *
- * Written by Milan Svoboda <msvoboda@ra.rockwell.com>
- * Based on PXA implementation by Philipp Zabel <philipp.zabel@gmail.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- *
- */
-
-#ifndef __ASM_ARCH_IXP4XX_GPIO_H
-#define __ASM_ARCH_IXP4XX_GPIO_H
-
-#include <asm/hardware.h>
-
-static inline int gpio_request(unsigned gpio, const char *label)
-{
-	return 0;
-}
-
-static inline void gpio_free(unsigned gpio)
-{
-	return;
-}
-
-static inline int gpio_direction_input(unsigned gpio)
-{
-	gpio_line_config(gpio, IXP4XX_GPIO_IN);
-	return 0;
-}
-
-static inline int gpio_direction_output(unsigned gpio, int level)
-{
-	gpio_line_set(gpio, level);
-	gpio_line_config(gpio, IXP4XX_GPIO_OUT);
-	return 0;
-}
-
-static inline int gpio_get_value(unsigned gpio)
-{
-	int value;
-
-	gpio_line_get(gpio, &value);
-
-	return value;
-}
-
-static inline void gpio_set_value(unsigned gpio, int value)
-{
-	gpio_line_set(gpio, value);
-}
-
-#include <asm-generic/gpio.h>			/* cansleep wrappers */
-
-extern int gpio_to_irq(int gpio);
-extern int irq_to_gpio(int gpio);
-
-#endif
-
diff --git a/include/asm-arm/arch-ixp4xx/hardware.h b/include/asm-arm/arch-ixp4xx/hardware.h
deleted file mode 100644
index fa723a627854..000000000000
--- a/include/asm-arm/arch-ixp4xx/hardware.h
+++ /dev/null
@@ -1,50 +0,0 @@
-/*
- * include/asm-arm/arch-ixp4xx/hardware.h 
- *
- * Copyright (C) 2002 Intel Corporation.
- * Copyright (C) 2003-2004 MontaVista Software, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-
-/*
- * Hardware definitions for IXP4xx based systems
- */
-
-#ifndef __ASM_ARCH_HARDWARE_H__
-#define __ASM_ARCH_HARDWARE_H__
-
-#define PCIBIOS_MIN_IO		0x00001000
-#define PCIBIOS_MIN_MEM		(cpu_is_ixp43x() ? 0x40000000 : 0x48000000)
-
-/*
- * We override the standard dma-mask routines for bouncing.
- */
-#define	HAVE_ARCH_PCI_SET_DMA_MASK
-
-#define pcibios_assign_all_busses()	1
-
-/* Register locations and bits */
-#include "ixp4xx-regs.h"
-
-#ifndef __ASSEMBLER__
-#include <asm/arch/cpu.h>
-#endif
-
-/* Platform helper functions and definitions */
-#include "platform.h"
-
-/* Platform specific details */
-#include "ixdp425.h"
-#include "avila.h"
-#include "coyote.h"
-#include "prpmc1100.h"
-#include "nslu2.h"
-#include "nas100d.h"
-#include "dsmg600.h"
-#include "fsg.h"
-
-#endif  /* _ASM_ARCH_HARDWARE_H */
diff --git a/include/asm-arm/arch-ixp4xx/io.h b/include/asm-arm/arch-ixp4xx/io.h
deleted file mode 100644
index de181ce958db..000000000000
--- a/include/asm-arm/arch-ixp4xx/io.h
+++ /dev/null
@@ -1,569 +0,0 @@
-/*
- * linux/include/asm-arm/arch-ixp4xx/io.h
- *
- * Author: Deepak Saxena <dsaxena@plexity.net>
- *
- * Copyright (C) 2002-2005  MontaVista Software, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ASM_ARM_ARCH_IO_H
-#define __ASM_ARM_ARCH_IO_H
-
-#include <linux/bitops.h>
-
-#include <asm/hardware.h>
-
-#define IO_SPACE_LIMIT 0xffff0000
-
-extern int (*ixp4xx_pci_read)(u32 addr, u32 cmd, u32* data);
-extern int ixp4xx_pci_write(u32 addr, u32 cmd, u32 data);
-
-
-/*
- * IXP4xx provides two methods of accessing PCI memory space:
- *
- * 1) A direct mapped window from 0x48000000 to 0x4bffffff (64MB).
- *    To access PCI via this space, we simply ioremap() the BAR
- *    into the kernel and we can use the standard read[bwl]/write[bwl]
- *    macros. This is the preffered method due to speed but it
- *    limits the system to just 64MB of PCI memory. This can be 
- *    problamatic if using video cards and other memory-heavy
- *    targets.
- *
- * 2) If > 64MB of memory space is required, the IXP4xx can be configured
- *    to use indirect registers to access PCI (as we do below for I/O
- *    transactions). This allows for up to 128MB (0x48000000 to 0x4fffffff)
- *    of memory on the bus. The disadvantage of this is that every 
- *    PCI access requires three local register accesses plus a spinlock,
- *    but in some cases the performance hit is acceptable. In addition,
- *    you cannot mmap() PCI devices in this case.
- *
- */
-#ifndef	CONFIG_IXP4XX_INDIRECT_PCI
-
-#define __mem_pci(a)		(a)
-
-#else
-
-#include <linux/mm.h>
-
-/*
- * In the case of using indirect PCI, we simply return the actual PCI
- * address and our read/write implementation use that to drive the 
- * access registers. If something outside of PCI is ioremap'd, we
- * fallback to the default.
- */
-static inline void __iomem *
-__ixp4xx_ioremap(unsigned long addr, size_t size, unsigned int mtype)
-{
-	if((addr < PCIBIOS_MIN_MEM) || (addr > 0x4fffffff))
-		return __arm_ioremap(addr, size, mtype);
-
-	return (void __iomem *)addr;
-}
-
-static inline void
-__ixp4xx_iounmap(void __iomem *addr)
-{
-	if ((__force u32)addr >= VMALLOC_START)
-		__iounmap(addr);
-}
-
-#define __arch_ioremap(a, s, f)		__ixp4xx_ioremap(a, s, f)
-#define	__arch_iounmap(a)		__ixp4xx_iounmap(a)
-
-#define	writeb(v, p)			__ixp4xx_writeb(v, p)
-#define	writew(v, p)			__ixp4xx_writew(v, p)
-#define	writel(v, p)			__ixp4xx_writel(v, p)
-
-#define	writesb(p, v, l)		__ixp4xx_writesb(p, v, l)
-#define	writesw(p, v, l)		__ixp4xx_writesw(p, v, l)
-#define	writesl(p, v, l)		__ixp4xx_writesl(p, v, l)
-	
-#define	readb(p)			__ixp4xx_readb(p)
-#define	readw(p)			__ixp4xx_readw(p)
-#define	readl(p)			__ixp4xx_readl(p)
-	
-#define	readsb(p, v, l)			__ixp4xx_readsb(p, v, l)
-#define	readsw(p, v, l)			__ixp4xx_readsw(p, v, l)
-#define	readsl(p, v, l)			__ixp4xx_readsl(p, v, l)
-
-static inline void 
-__ixp4xx_writeb(u8 value, volatile void __iomem *p)
-{
-	u32 addr = (u32)p;
-	u32 n, byte_enables, data;
-
-	if (addr >= VMALLOC_START) {
-		__raw_writeb(value, addr);
-		return;
-	}
-
-	n = addr % 4;
-	byte_enables = (0xf & ~BIT(n)) << IXP4XX_PCI_NP_CBE_BESL;
-	data = value << (8*n);
-	ixp4xx_pci_write(addr, byte_enables | NP_CMD_MEMWRITE, data);
-}
-
-static inline void
-__ixp4xx_writesb(volatile void __iomem *bus_addr, const u8 *vaddr, int count)
-{
-	while (count--)
-		writeb(*vaddr++, bus_addr);
-}
-
-static inline void 
-__ixp4xx_writew(u16 value, volatile void __iomem *p)
-{
-	u32 addr = (u32)p;
-	u32 n, byte_enables, data;
-
-	if (addr >= VMALLOC_START) {
-		__raw_writew(value, addr);
-		return;
-	}
-
-	n = addr % 4;
-	byte_enables = (0xf & ~(BIT(n) | BIT(n+1))) << IXP4XX_PCI_NP_CBE_BESL;
-	data = value << (8*n);
-	ixp4xx_pci_write(addr, byte_enables | NP_CMD_MEMWRITE, data);
-}
-
-static inline void
-__ixp4xx_writesw(volatile void __iomem *bus_addr, const u16 *vaddr, int count)
-{
-	while (count--)
-		writew(*vaddr++, bus_addr);
-}
-
-static inline void 
-__ixp4xx_writel(u32 value, volatile void __iomem *p)
-{
-	u32 addr = (__force u32)p;
-	if (addr >= VMALLOC_START) {
-		__raw_writel(value, p);
-		return;
-	}
-
-	ixp4xx_pci_write(addr, NP_CMD_MEMWRITE, value);
-}
-
-static inline void
-__ixp4xx_writesl(volatile void __iomem *bus_addr, const u32 *vaddr, int count)
-{
-	while (count--)
-		writel(*vaddr++, bus_addr);
-}
-
-static inline unsigned char 
-__ixp4xx_readb(const volatile void __iomem *p)
-{
-	u32 addr = (u32)p;
-	u32 n, byte_enables, data;
-
-	if (addr >= VMALLOC_START)
-		return __raw_readb(addr);
-
-	n = addr % 4;
-	byte_enables = (0xf & ~BIT(n)) << IXP4XX_PCI_NP_CBE_BESL;
-	if (ixp4xx_pci_read(addr, byte_enables | NP_CMD_MEMREAD, &data))
-		return 0xff;
-
-	return data >> (8*n);
-}
-
-static inline void
-__ixp4xx_readsb(const volatile void __iomem *bus_addr, u8 *vaddr, u32 count)
-{
-	while (count--)
-		*vaddr++ = readb(bus_addr);
-}
-
-static inline unsigned short 
-__ixp4xx_readw(const volatile void __iomem *p)
-{
-	u32 addr = (u32)p;
-	u32 n, byte_enables, data;
-
-	if (addr >= VMALLOC_START)
-		return __raw_readw(addr);
-
-	n = addr % 4;
-	byte_enables = (0xf & ~(BIT(n) | BIT(n+1))) << IXP4XX_PCI_NP_CBE_BESL;
-	if (ixp4xx_pci_read(addr, byte_enables | NP_CMD_MEMREAD, &data))
-		return 0xffff;
-
-	return data>>(8*n);
-}
-
-static inline void 
-__ixp4xx_readsw(const volatile void __iomem *bus_addr, u16 *vaddr, u32 count)
-{
-	while (count--)
-		*vaddr++ = readw(bus_addr);
-}
-
-static inline unsigned long 
-__ixp4xx_readl(const volatile void __iomem *p)
-{
-	u32 addr = (__force u32)p;
-	u32 data;
-
-	if (addr >= VMALLOC_START)
-		return __raw_readl(p);
-
-	if (ixp4xx_pci_read(addr, NP_CMD_MEMREAD, &data))
-		return 0xffffffff;
-
-	return data;
-}
-
-static inline void 
-__ixp4xx_readsl(const volatile void __iomem *bus_addr, u32 *vaddr, u32 count)
-{
-	while (count--)
-		*vaddr++ = readl(bus_addr);
-}
-
-
-/*
- * We can use the built-in functions b/c they end up calling writeb/readb
- */
-#define memset_io(c,v,l)		_memset_io((c),(v),(l))
-#define memcpy_fromio(a,c,l)		_memcpy_fromio((a),(c),(l))
-#define memcpy_toio(c,a,l)		_memcpy_toio((c),(a),(l))
-
-#endif
-
-#ifndef CONFIG_PCI
-
-#define	__io(v)		v
-
-#else
-
-/*
- * IXP4xx does not have a transparent cpu -> PCI I/O translation
- * window.  Instead, it has a set of registers that must be tweaked
- * with the proper byte lanes, command types, and address for the
- * transaction.  This means that we need to override the default
- * I/O functions.
- */
-#define	outb(p, v)			__ixp4xx_outb(p, v)
-#define	outw(p, v)			__ixp4xx_outw(p, v)
-#define	outl(p, v)			__ixp4xx_outl(p, v)
-	
-#define	outsb(p, v, l)			__ixp4xx_outsb(p, v, l)
-#define	outsw(p, v, l)			__ixp4xx_outsw(p, v, l)
-#define	outsl(p, v, l)			__ixp4xx_outsl(p, v, l)
-
-#define	inb(p)				__ixp4xx_inb(p)
-#define	inw(p)				__ixp4xx_inw(p)
-#define	inl(p)				__ixp4xx_inl(p)
-
-#define	insb(p, v, l)			__ixp4xx_insb(p, v, l)
-#define	insw(p, v, l)			__ixp4xx_insw(p, v, l)
-#define	insl(p, v, l)			__ixp4xx_insl(p, v, l)
-
-
-static inline void 
-__ixp4xx_outb(u8 value, u32 addr)
-{
-	u32 n, byte_enables, data;
-	n = addr % 4;
-	byte_enables = (0xf & ~BIT(n)) << IXP4XX_PCI_NP_CBE_BESL;
-	data = value << (8*n);
-	ixp4xx_pci_write(addr, byte_enables | NP_CMD_IOWRITE, data);
-}
-
-static inline void 
-__ixp4xx_outsb(u32 io_addr, const u8 *vaddr, u32 count)
-{
-	while (count--)
-		outb(*vaddr++, io_addr);
-}
-
-static inline void 
-__ixp4xx_outw(u16 value, u32 addr)
-{
-	u32 n, byte_enables, data;
-	n = addr % 4;
-	byte_enables = (0xf & ~(BIT(n) | BIT(n+1))) << IXP4XX_PCI_NP_CBE_BESL;
-	data = value << (8*n);
-	ixp4xx_pci_write(addr, byte_enables | NP_CMD_IOWRITE, data);
-}
-
-static inline void 
-__ixp4xx_outsw(u32 io_addr, const u16 *vaddr, u32 count)
-{
-	while (count--)
-		outw(cpu_to_le16(*vaddr++), io_addr);
-}
-
-static inline void 
-__ixp4xx_outl(u32 value, u32 addr)
-{
-	ixp4xx_pci_write(addr, NP_CMD_IOWRITE, value);
-}
-
-static inline void 
-__ixp4xx_outsl(u32 io_addr, const u32 *vaddr, u32 count)
-{
-	while (count--)
-		outl(*vaddr++, io_addr);
-}
-
-static inline u8 
-__ixp4xx_inb(u32 addr)
-{
-	u32 n, byte_enables, data;
-	n = addr % 4;
-	byte_enables = (0xf & ~BIT(n)) << IXP4XX_PCI_NP_CBE_BESL;
-	if (ixp4xx_pci_read(addr, byte_enables | NP_CMD_IOREAD, &data))
-		return 0xff;
-
-	return data >> (8*n);
-}
-
-static inline void 
-__ixp4xx_insb(u32 io_addr, u8 *vaddr, u32 count)
-{
-	while (count--)
-		*vaddr++ = inb(io_addr);
-}
-
-static inline u16 
-__ixp4xx_inw(u32 addr)
-{
-	u32 n, byte_enables, data;
-	n = addr % 4;
-	byte_enables = (0xf & ~(BIT(n) | BIT(n+1))) << IXP4XX_PCI_NP_CBE_BESL;
-	if (ixp4xx_pci_read(addr, byte_enables | NP_CMD_IOREAD, &data))
-		return 0xffff;
-
-	return data>>(8*n);
-}
-
-static inline void 
-__ixp4xx_insw(u32 io_addr, u16 *vaddr, u32 count)
-{
-	while (count--)
-		*vaddr++ = le16_to_cpu(inw(io_addr));
-}
-
-static inline u32 
-__ixp4xx_inl(u32 addr)
-{
-	u32 data;
-	if (ixp4xx_pci_read(addr, NP_CMD_IOREAD, &data))
-		return 0xffffffff;
-
-	return data;
-}
-
-static inline void 
-__ixp4xx_insl(u32 io_addr, u32 *vaddr, u32 count)
-{
-	while (count--)
-		*vaddr++ = inl(io_addr);
-}
-
-#define PIO_OFFSET      0x10000UL
-#define PIO_MASK        0x0ffffUL
-
-#define	__is_io_address(p)	(((unsigned long)p >= PIO_OFFSET) && \
-					((unsigned long)p <= (PIO_MASK + PIO_OFFSET)))
-static inline unsigned int
-__ixp4xx_ioread8(const void __iomem *addr)
-{
-	unsigned long port = (unsigned long __force)addr;
-	if (__is_io_address(port))
-		return	(unsigned int)__ixp4xx_inb(port & PIO_MASK);
-	else
-#ifndef CONFIG_IXP4XX_INDIRECT_PCI
-		return (unsigned int)__raw_readb(port);
-#else
-		return (unsigned int)__ixp4xx_readb(addr);
-#endif
-}
-
-static inline void
-__ixp4xx_ioread8_rep(const void __iomem *addr, void *vaddr, u32 count)
-{
-	unsigned long port = (unsigned long __force)addr;
-	if (__is_io_address(port))
-		__ixp4xx_insb(port & PIO_MASK, vaddr, count);
-	else
-#ifndef	CONFIG_IXP4XX_INDIRECT_PCI
-		__raw_readsb(addr, vaddr, count);
-#else
-		__ixp4xx_readsb(addr, vaddr, count);
-#endif
-}
-
-static inline unsigned int
-__ixp4xx_ioread16(const void __iomem *addr)
-{
-	unsigned long port = (unsigned long __force)addr;
-	if (__is_io_address(port))
-		return	(unsigned int)__ixp4xx_inw(port & PIO_MASK);
-	else
-#ifndef CONFIG_IXP4XX_INDIRECT_PCI
-		return le16_to_cpu(__raw_readw((u32)port));
-#else
-		return (unsigned int)__ixp4xx_readw(addr);
-#endif
-}
-
-static inline void
-__ixp4xx_ioread16_rep(const void __iomem *addr, void *vaddr, u32 count)
-{
-	unsigned long port = (unsigned long __force)addr;
-	if (__is_io_address(port))
-		__ixp4xx_insw(port & PIO_MASK, vaddr, count);
-	else
-#ifndef	CONFIG_IXP4XX_INDIRECT_PCI
-		__raw_readsw(addr, vaddr, count);
-#else
-		__ixp4xx_readsw(addr, vaddr, count);
-#endif
-}
-
-static inline unsigned int
-__ixp4xx_ioread32(const void __iomem *addr)
-{
-	unsigned long port = (unsigned long __force)addr;
-	if (__is_io_address(port))
-		return	(unsigned int)__ixp4xx_inl(port & PIO_MASK);
-	else {
-#ifndef CONFIG_IXP4XX_INDIRECT_PCI
-		return le32_to_cpu((__force __le32)__raw_readl(addr));
-#else
-		return (unsigned int)__ixp4xx_readl(addr);
-#endif
-	}
-}
-
-static inline void
-__ixp4xx_ioread32_rep(const void __iomem *addr, void *vaddr, u32 count)
-{
-	unsigned long port = (unsigned long __force)addr;
-	if (__is_io_address(port))
-		__ixp4xx_insl(port & PIO_MASK, vaddr, count);
-	else
-#ifndef	CONFIG_IXP4XX_INDIRECT_PCI
-		__raw_readsl(addr, vaddr, count);
-#else
-		__ixp4xx_readsl(addr, vaddr, count);
-#endif
-}
-
-static inline void
-__ixp4xx_iowrite8(u8 value, void __iomem *addr)
-{
-	unsigned long port = (unsigned long __force)addr;
-	if (__is_io_address(port))
-		__ixp4xx_outb(value, port & PIO_MASK);
-	else
-#ifndef CONFIG_IXP4XX_INDIRECT_PCI
-		__raw_writeb(value, port);
-#else
-		__ixp4xx_writeb(value, addr);
-#endif
-}
-
-static inline void
-__ixp4xx_iowrite8_rep(void __iomem *addr, const void *vaddr, u32 count)
-{
-	unsigned long port = (unsigned long __force)addr;
-	if (__is_io_address(port))
-		__ixp4xx_outsb(port & PIO_MASK, vaddr, count);
-	else
-#ifndef CONFIG_IXP4XX_INDIRECT_PCI
-		__raw_writesb(addr, vaddr, count);
-#else
-		__ixp4xx_writesb(addr, vaddr, count);
-#endif
-}
-
-static inline void
-__ixp4xx_iowrite16(u16 value, void __iomem *addr)
-{
-	unsigned long port = (unsigned long __force)addr;
-	if (__is_io_address(port))
-		__ixp4xx_outw(value, port & PIO_MASK);
-	else
-#ifndef CONFIG_IXP4XX_INDIRECT_PCI
-		__raw_writew(cpu_to_le16(value), addr);
-#else
-		__ixp4xx_writew(value, addr);
-#endif
-}
-
-static inline void
-__ixp4xx_iowrite16_rep(void __iomem *addr, const void *vaddr, u32 count)
-{
-	unsigned long port = (unsigned long __force)addr;
-	if (__is_io_address(port))
-		__ixp4xx_outsw(port & PIO_MASK, vaddr, count);
-	else
-#ifndef CONFIG_IXP4XX_INDIRECT_PCI
-		__raw_writesw(addr, vaddr, count);
-#else
-		__ixp4xx_writesw(addr, vaddr, count);
-#endif
-}
-
-static inline void
-__ixp4xx_iowrite32(u32 value, void __iomem *addr)
-{
-	unsigned long port = (unsigned long __force)addr;
-	if (__is_io_address(port))
-		__ixp4xx_outl(value, port & PIO_MASK);
-	else
-#ifndef CONFIG_IXP4XX_INDIRECT_PCI
-		__raw_writel((u32 __force)cpu_to_le32(value), addr);
-#else
-		__ixp4xx_writel(value, addr);
-#endif
-}
-
-static inline void
-__ixp4xx_iowrite32_rep(void __iomem *addr, const void *vaddr, u32 count)
-{
-	unsigned long port = (unsigned long __force)addr;
-	if (__is_io_address(port))
-		__ixp4xx_outsl(port & PIO_MASK, vaddr, count);
-	else
-#ifndef CONFIG_IXP4XX_INDIRECT_PCI
-		__raw_writesl(addr, vaddr, count);
-#else
-		__ixp4xx_writesl(addr, vaddr, count);
-#endif
-}
-
-#define	ioread8(p)			__ixp4xx_ioread8(p)
-#define	ioread16(p)			__ixp4xx_ioread16(p)
-#define	ioread32(p)			__ixp4xx_ioread32(p)
-
-#define	ioread8_rep(p, v, c)		__ixp4xx_ioread8_rep(p, v, c)
-#define	ioread16_rep(p, v, c)		__ixp4xx_ioread16_rep(p, v, c)
-#define	ioread32_rep(p, v, c)		__ixp4xx_ioread32_rep(p, v, c)
-
-#define	iowrite8(v,p)			__ixp4xx_iowrite8(v,p)
-#define	iowrite16(v,p)			__ixp4xx_iowrite16(v,p)
-#define	iowrite32(v,p)			__ixp4xx_iowrite32(v,p)
-
-#define	iowrite8_rep(p, v, c)		__ixp4xx_iowrite8_rep(p, v, c)
-#define	iowrite16_rep(p, v, c)		__ixp4xx_iowrite16_rep(p, v, c)
-#define	iowrite32_rep(p, v, c)		__ixp4xx_iowrite32_rep(p, v, c)
-
-#define	ioport_map(port, nr)		((void __iomem*)(port + PIO_OFFSET))
-#define	ioport_unmap(addr)
-#endif	// !CONFIG_PCI
-
-#endif	//  __ASM_ARM_ARCH_IO_H
-
diff --git a/include/asm-arm/arch-ixp4xx/irqs.h b/include/asm-arm/arch-ixp4xx/irqs.h
deleted file mode 100644
index 674af4a84147..000000000000
--- a/include/asm-arm/arch-ixp4xx/irqs.h
+++ /dev/null
@@ -1,138 +0,0 @@
-/*
- * include/asm-arm/arch-ixp4xx/irqs.h 
- *
- * IRQ definitions for IXP4XX based systems
- *
- * Copyright (C) 2002 Intel Corporation.
- * Copyright (C) 2003 MontaVista Software, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-
-#ifndef _ARCH_IXP4XX_IRQS_H_
-#define _ARCH_IXP4XX_IRQS_H_
-
-
-#define IRQ_IXP4XX_NPEA		0
-#define IRQ_IXP4XX_NPEB		1
-#define IRQ_IXP4XX_NPEC		2
-#define IRQ_IXP4XX_QM1		3
-#define IRQ_IXP4XX_QM2		4
-#define IRQ_IXP4XX_TIMER1	5
-#define IRQ_IXP4XX_GPIO0	6
-#define IRQ_IXP4XX_GPIO1	7
-#define IRQ_IXP4XX_PCI_INT	8
-#define IRQ_IXP4XX_PCI_DMA1	9
-#define IRQ_IXP4XX_PCI_DMA2	10
-#define IRQ_IXP4XX_TIMER2	11
-#define IRQ_IXP4XX_USB		12
-#define IRQ_IXP4XX_UART2	13
-#define IRQ_IXP4XX_TIMESTAMP	14
-#define IRQ_IXP4XX_UART1	15
-#define IRQ_IXP4XX_WDOG		16
-#define IRQ_IXP4XX_AHB_PMU	17
-#define IRQ_IXP4XX_XSCALE_PMU	18
-#define IRQ_IXP4XX_GPIO2	19
-#define IRQ_IXP4XX_GPIO3	20
-#define IRQ_IXP4XX_GPIO4	21
-#define IRQ_IXP4XX_GPIO5	22
-#define IRQ_IXP4XX_GPIO6	23
-#define IRQ_IXP4XX_GPIO7	24
-#define IRQ_IXP4XX_GPIO8	25
-#define IRQ_IXP4XX_GPIO9	26
-#define IRQ_IXP4XX_GPIO10	27
-#define IRQ_IXP4XX_GPIO11	28
-#define IRQ_IXP4XX_GPIO12	29
-#define IRQ_IXP4XX_SW_INT1	30
-#define IRQ_IXP4XX_SW_INT2	31
-#define IRQ_IXP4XX_USB_HOST	32
-#define IRQ_IXP4XX_I2C		33
-#define IRQ_IXP4XX_SSP		34
-#define IRQ_IXP4XX_TSYNC	35
-#define IRQ_IXP4XX_EAU_DONE	36
-#define IRQ_IXP4XX_SHA_DONE	37
-#define IRQ_IXP4XX_SWCP_PE	58
-#define IRQ_IXP4XX_QM_PE	60
-#define IRQ_IXP4XX_MCU_ECC	61
-#define IRQ_IXP4XX_EXP_PE	62
-
-/*
- * Only first 32 sources are valid if running on IXP42x systems
- */
-#if defined(CONFIG_CPU_IXP46X) || defined(CONFIG_CPU_IXP43X)
-#define NR_IRQS			64
-#else
-#define NR_IRQS			32
-#endif
-
-#define	XSCALE_PMU_IRQ		(IRQ_IXP4XX_XSCALE_PMU)
-
-/*
- * IXDP425 board IRQs
- */
-#define	IRQ_IXDP425_PCI_INTA	IRQ_IXP4XX_GPIO11
-#define	IRQ_IXDP425_PCI_INTB	IRQ_IXP4XX_GPIO10
-#define	IRQ_IXDP425_PCI_INTC	IRQ_IXP4XX_GPIO9
-#define	IRQ_IXDP425_PCI_INTD	IRQ_IXP4XX_GPIO8
-
-/*
- * Gateworks Avila board IRQs
- */
-#define	IRQ_AVILA_PCI_INTA	IRQ_IXP4XX_GPIO11
-#define	IRQ_AVILA_PCI_INTB	IRQ_IXP4XX_GPIO10
-#define	IRQ_AVILA_PCI_INTC	IRQ_IXP4XX_GPIO9
-#define	IRQ_AVILA_PCI_INTD	IRQ_IXP4XX_GPIO8
-
-
-/*
- * PrPMC1100 Board IRQs
- */
-#define	IRQ_PRPMC1100_PCI_INTA	IRQ_IXP4XX_GPIO11
-#define	IRQ_PRPMC1100_PCI_INTB	IRQ_IXP4XX_GPIO10
-#define	IRQ_PRPMC1100_PCI_INTC	IRQ_IXP4XX_GPIO9
-#define	IRQ_PRPMC1100_PCI_INTD	IRQ_IXP4XX_GPIO8
-
-/*
- * ADI Coyote Board IRQs
- */
-#define	IRQ_COYOTE_PCI_SLOT0	IRQ_IXP4XX_GPIO6
-#define	IRQ_COYOTE_PCI_SLOT1	IRQ_IXP4XX_GPIO11
-#define	IRQ_COYOTE_IDE		IRQ_IXP4XX_GPIO5
-
-/*
- * NSLU2 board IRQs
- */
-#define        IRQ_NSLU2_PCI_INTA      IRQ_IXP4XX_GPIO11
-#define        IRQ_NSLU2_PCI_INTB      IRQ_IXP4XX_GPIO10
-#define        IRQ_NSLU2_PCI_INTC      IRQ_IXP4XX_GPIO9
-
-/*
- * NAS100D board IRQs
- */
-#define        IRQ_NAS100D_PCI_INTA    IRQ_IXP4XX_GPIO11
-#define        IRQ_NAS100D_PCI_INTB    IRQ_IXP4XX_GPIO10
-#define        IRQ_NAS100D_PCI_INTC    IRQ_IXP4XX_GPIO9
-#define        IRQ_NAS100D_PCI_INTD    IRQ_IXP4XX_GPIO8
-#define        IRQ_NAS100D_PCI_INTE    IRQ_IXP4XX_GPIO7
-
-/*
- * D-Link DSM-G600 RevA board IRQs
- */
-#define        IRQ_DSMG600_PCI_INTA    IRQ_IXP4XX_GPIO11
-#define        IRQ_DSMG600_PCI_INTB    IRQ_IXP4XX_GPIO10
-#define        IRQ_DSMG600_PCI_INTC    IRQ_IXP4XX_GPIO9
-#define        IRQ_DSMG600_PCI_INTD    IRQ_IXP4XX_GPIO8
-#define        IRQ_DSMG600_PCI_INTE    IRQ_IXP4XX_GPIO7
-#define        IRQ_DSMG600_PCI_INTF    IRQ_IXP4XX_GPIO6
-
-/*
- * Freecom FSG-3 Board IRQs
- */
-#define        IRQ_FSG_PCI_INTA        IRQ_IXP4XX_GPIO6
-#define        IRQ_FSG_PCI_INTB        IRQ_IXP4XX_GPIO7
-#define        IRQ_FSG_PCI_INTC        IRQ_IXP4XX_GPIO5
-
-#endif
diff --git a/include/asm-arm/arch-ixp4xx/memory.h b/include/asm-arm/arch-ixp4xx/memory.h
deleted file mode 100644
index af9667b57ab3..000000000000
--- a/include/asm-arm/arch-ixp4xx/memory.h
+++ /dev/null
@@ -1,40 +0,0 @@
-/*
- * linux/include/asm-arm/arch-ixp4xx/memory.h
- *
- * Copyright (c) 2001-2004 MontaVista Software, Inc.
- */
-
-#ifndef __ASM_ARCH_MEMORY_H
-#define __ASM_ARCH_MEMORY_H
-
-#include <asm/sizes.h>
-
-/*
- * Physical DRAM offset.
- */
-#define PHYS_OFFSET	UL(0x00000000)
-
-#if !defined(__ASSEMBLY__) && defined(CONFIG_PCI)
-
-void ixp4xx_adjust_zones(int node, unsigned long *size, unsigned long *holes);
-
-#define arch_adjust_zones(node, size, holes) \
-	ixp4xx_adjust_zones(node, size, holes)
-
-#define ISA_DMA_THRESHOLD (SZ_64M - 1)
-
-#endif
-
-/*
- * Virtual view <-> DMA view memory address translations
- * virt_to_bus: Used to translate the virtual address to an
- *		address suitable to be passed to set_dma_addr
- * bus_to_virt: Used to convert an address for DMA operations
- *		to an address that the kernel can use.
- *
- * These are dummies for now.
- */
-#define __virt_to_bus(x)	 __virt_to_phys(x)
-#define __bus_to_virt(x)	 __phys_to_virt(x)
-
-#endif
diff --git a/include/asm-arm/arch-ixp4xx/platform.h b/include/asm-arm/arch-ixp4xx/platform.h
deleted file mode 100644
index a1f2b5404db1..000000000000
--- a/include/asm-arm/arch-ixp4xx/platform.h
+++ /dev/null
@@ -1,173 +0,0 @@
-/*
- * include/asm-arm/arch-ixp4xx/platform.h
- *
- * Constants and functions that are useful to IXP4xx platform-specific code
- * and device drivers.
- *
- * Copyright (C) 2004 MontaVista Software, Inc.
- */
-
-#ifndef __ASM_ARCH_HARDWARE_H__
-#error "Do not include this directly, instead #include <asm/hardware.h>"
-#endif
-
-#ifndef __ASSEMBLY__
-
-#include <asm/types.h>
-
-#ifndef	__ARMEB__
-#define	REG_OFFSET	0
-#else
-#define	REG_OFFSET	3
-#endif
-
-/*
- * Expansion bus memory regions
- */
-#define IXP4XX_EXP_BUS_BASE_PHYS	(0x50000000)
-
-/*
- * The expansion bus on the IXP4xx can be configured for either 16 or
- * 32MB windows and the CS offset for each region changes based on the
- * current configuration. This means that we cannot simply hardcode
- * each offset. ixp4xx_sys_init() looks at the expansion bus configuration
- * as setup by the bootloader to determine our window size.
- */
-extern unsigned long ixp4xx_exp_bus_size;
-
-#define	IXP4XX_EXP_BUS_BASE(region)\
-		(IXP4XX_EXP_BUS_BASE_PHYS + ((region) * ixp4xx_exp_bus_size))
-
-#define IXP4XX_EXP_BUS_END(region)\
-		(IXP4XX_EXP_BUS_BASE(region) + ixp4xx_exp_bus_size - 1)
-
-/* Those macros can be used to adjust timing and configure
- * other features for each region.
- */
-
-#define IXP4XX_EXP_BUS_RECOVERY_T(x)	(((x) & 0x0f) << 16)
-#define IXP4XX_EXP_BUS_HOLD_T(x)	(((x) & 0x03) << 20)
-#define IXP4XX_EXP_BUS_STROBE_T(x)	(((x) & 0x0f) << 22)
-#define IXP4XX_EXP_BUS_SETUP_T(x)	(((x) & 0x03) << 26)
-#define IXP4XX_EXP_BUS_ADDR_T(x)	(((x) & 0x03) << 28)
-#define IXP4XX_EXP_BUS_SIZE(x)		(((x) & 0x0f) << 10)
-#define IXP4XX_EXP_BUS_CYCLES(x)	(((x) & 0x03) << 14)
-
-#define IXP4XX_EXP_BUS_CS_EN		(1L << 31)
-#define IXP4XX_EXP_BUS_BYTE_RD16	(1L << 6)
-#define IXP4XX_EXP_BUS_HRDY_POL		(1L << 5)
-#define IXP4XX_EXP_BUS_MUX_EN		(1L << 4)
-#define IXP4XX_EXP_BUS_SPLT_EN		(1L << 3)
-#define IXP4XX_EXP_BUS_WR_EN		(1L << 1)
-#define IXP4XX_EXP_BUS_BYTE_EN		(1L << 0)
-
-#define IXP4XX_EXP_BUS_CYCLES_INTEL	0x00
-#define IXP4XX_EXP_BUS_CYCLES_MOTOROLA	0x01
-#define IXP4XX_EXP_BUS_CYCLES_HPI	0x02
-
-#define IXP4XX_FLASH_WRITABLE	(0x2)
-#define IXP4XX_FLASH_DEFAULT	(0xbcd23c40)
-#define IXP4XX_FLASH_WRITE	(0xbcd23c42)
-
-/*
- * Clock Speed Definitions.
- */
-#define IXP4XX_PERIPHERAL_BUS_CLOCK 	(66) /* 66Mhzi APB BUS   */ 
-#define IXP4XX_UART_XTAL        	14745600
-
-/*
- * This structure provide a means for the board setup code
- * to give information to th pata_ixp4xx driver. It is
- * passed as platform_data.
- */
-struct ixp4xx_pata_data {
-	volatile u32	*cs0_cfg;
-	volatile u32	*cs1_cfg;
-	unsigned long	cs0_bits;
-	unsigned long	cs1_bits;
-	void __iomem	*cs0;
-	void __iomem	*cs1;
-};
-
-struct sys_timer;
-
-#define IXP4XX_ETH_NPEA		0x00
-#define IXP4XX_ETH_NPEB		0x10
-#define IXP4XX_ETH_NPEC		0x20
-
-/* Information about built-in Ethernet MAC interfaces */
-struct eth_plat_info {
-	u8 phy;		/* MII PHY ID, 0 - 31 */
-	u8 rxq;		/* configurable, currently 0 - 31 only */
-	u8 txreadyq;
-	u8 hwaddr[6];
-};
-
-/* Information about built-in HSS (synchronous serial) interfaces */
-struct hss_plat_info {
-	int (*set_clock)(int port, unsigned int clock_type);
-	int (*open)(int port, void *pdev,
-		    void (*set_carrier_cb)(void *pdev, int carrier));
-	void (*close)(int port, void *pdev);
-	u8 txreadyq;
-};
-
-/*
- * Frequency of clock used for primary clocksource
- */
-extern unsigned long ixp4xx_timer_freq;
-
-/*
- * Functions used by platform-level setup code
- */
-extern void ixp4xx_map_io(void);
-extern void ixp4xx_init_irq(void);
-extern void ixp4xx_sys_init(void);
-extern void ixp4xx_timer_init(void);
-extern struct sys_timer ixp4xx_timer;
-extern void ixp4xx_pci_preinit(void);
-struct pci_sys_data;
-extern int ixp4xx_setup(int nr, struct pci_sys_data *sys);
-extern struct pci_bus *ixp4xx_scan_bus(int nr, struct pci_sys_data *sys);
-
-/*
- * GPIO-functions
- */
-/*
- * The following converted to the real HW bits the gpio_line_config
- */
-/* GPIO pin types */
-#define IXP4XX_GPIO_OUT 		0x1
-#define IXP4XX_GPIO_IN  		0x2
-
-/* GPIO signal types */
-#define IXP4XX_GPIO_LOW			0
-#define IXP4XX_GPIO_HIGH		1
-
-/* GPIO Clocks */
-#define IXP4XX_GPIO_CLK_0		14
-#define IXP4XX_GPIO_CLK_1		15
-
-static inline void gpio_line_config(u8 line, u32 direction)
-{
-	if (direction == IXP4XX_GPIO_IN)
-		*IXP4XX_GPIO_GPOER |= (1 << line);
-	else
-		*IXP4XX_GPIO_GPOER &= ~(1 << line);
-}
-
-static inline void gpio_line_get(u8 line, int *value)
-{
-	*value = (*IXP4XX_GPIO_GPINR >> line) & 0x1;
-}
-
-static inline void gpio_line_set(u8 line, int value)
-{
-	if (value == IXP4XX_GPIO_HIGH)
-	    *IXP4XX_GPIO_GPOUTR |= (1 << line);
-	else if (value == IXP4XX_GPIO_LOW)
-	    *IXP4XX_GPIO_GPOUTR &= ~(1 << line);
-}
-
-#endif // __ASSEMBLY__
-
diff --git a/include/asm-arm/arch-ixp4xx/system.h b/include/asm-arm/arch-ixp4xx/system.h
deleted file mode 100644
index 8e1db423b1cc..000000000000
--- a/include/asm-arm/arch-ixp4xx/system.h
+++ /dev/null
@@ -1,42 +0,0 @@
-/*
- * include/asm-arm/arch-ixp4xx/system.h
- *
- * Copyright (C) 2002 Intel Corporation.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-
-#include <asm/hardware.h>
-
-static inline void arch_idle(void)
-{
-#if 0
-	if (!hlt_counter)
-		cpu_do_idle(0);
-#endif
-}
-
-
-static inline void arch_reset(char mode)
-{
-	if ( 1 && mode == 's') {
-		/* Jump into ROM at address 0 */
-		cpu_reset(0);
-	} else {
-		/* Use on-chip reset capability */
-
-		/* set the "key" register to enable access to
-		 * "timer" and "enable" registers
-		 */
-		*IXP4XX_OSWK = IXP4XX_WDT_KEY;
-
-		/* write 0 to the timer register for an immediate reset */
-		*IXP4XX_OSWT = 0;
-
-		*IXP4XX_OSWE = IXP4XX_WDT_RESET_ENABLE | IXP4XX_WDT_COUNT_ENABLE;
-	}
-}
-
diff --git a/include/asm-arm/arch-ixp4xx/timex.h b/include/asm-arm/arch-ixp4xx/timex.h
deleted file mode 100644
index 3745e35cc030..000000000000
--- a/include/asm-arm/arch-ixp4xx/timex.h
+++ /dev/null
@@ -1,15 +0,0 @@
-/*
- * linux/include/asm-arm/arch-ixp4xx/timex.h
- * 
- */
-
-#include <asm/hardware.h>
-
-/*
- * We use IXP425 General purpose timer for our timer needs, it runs at 
- * 66.66... MHz. We do a convulted calculation of CLOCK_TICK_RATE b/c the
- * timer register ignores the bottom 2 bits of the LATCH value.
- */
-#define FREQ 66666666
-#define CLOCK_TICK_RATE (((FREQ / HZ & ~IXP4XX_OST_RELOAD_MASK) + 1) * HZ)
-
diff --git a/include/asm-arm/arch-ixp4xx/udc.h b/include/asm-arm/arch-ixp4xx/udc.h
deleted file mode 100644
index dbdec36ff0d1..000000000000
--- a/include/asm-arm/arch-ixp4xx/udc.h
+++ /dev/null
@@ -1,8 +0,0 @@
-/*
- * linux/include/asm-arm/arch-ixp4xx/udc.h
- *
- */
-#include <asm/mach/udc_pxa2xx.h>
-
-extern void ixp4xx_set_udc_info(struct pxa2xx_udc_mach_info *info);
-
diff --git a/include/asm-arm/arch-ixp4xx/uncompress.h b/include/asm-arm/arch-ixp4xx/uncompress.h
deleted file mode 100644
index 34ef48fe327e..000000000000
--- a/include/asm-arm/arch-ixp4xx/uncompress.h
+++ /dev/null
@@ -1,57 +0,0 @@
-/*
- * include/asm-arm/arch-ixp4xx/uncompress.h 
- *
- * Copyright (C) 2002 Intel Corporation.
- * Copyright (C) 2003-2004 MontaVista Software, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-
-#ifndef _ARCH_UNCOMPRESS_H_
-#define _ARCH_UNCOMPRESS_H_
-
-#include "ixp4xx-regs.h"
-#include <asm/mach-types.h>
-#include <linux/serial_reg.h>
-
-#define TX_DONE (UART_LSR_TEMT|UART_LSR_THRE)
-
-static volatile u32* uart_base;
-
-static inline void putc(int c)
-{
-	/* Check THRE and TEMT bits before we transmit the character.
-	 */
-	while ((uart_base[UART_LSR] & TX_DONE) != TX_DONE)
-		barrier();
-
-	*uart_base = c;
-}
-
-static void flush(void)
-{
-}
-
-static __inline__ void __arch_decomp_setup(unsigned long arch_id)
-{
-	/*
-	 * Some boards are using UART2 as console
-	 */
-	if (machine_is_adi_coyote() || machine_is_gtwx5715() ||
-			 machine_is_gateway7001() || machine_is_wg302v2())
-		uart_base = (volatile u32*) IXP4XX_UART2_BASE_PHYS;
-	else
-		uart_base = (volatile u32*) IXP4XX_UART1_BASE_PHYS;
-}
-
-/*
- * arch_id is a variable in decompress_kernel()
- */
-#define arch_decomp_setup()	__arch_decomp_setup(arch_id)
-
-#define arch_decomp_wdog()
-
-#endif
diff --git a/include/asm-arm/arch-ixp4xx/vmalloc.h b/include/asm-arm/arch-ixp4xx/vmalloc.h
deleted file mode 100644
index 050d46e6b126..000000000000
--- a/include/asm-arm/arch-ixp4xx/vmalloc.h
+++ /dev/null
@@ -1,5 +0,0 @@
-/*
- * linux/include/asm-arm/arch-ixp4xx/vmalloc.h
- */
-#define VMALLOC_END       (0xFF000000)
-
diff --git a/include/asm-arm/arch-kirkwood/debug-macro.S b/include/asm-arm/arch-kirkwood/debug-macro.S
deleted file mode 100644
index f55fb8ad9ee4..000000000000
--- a/include/asm-arm/arch-kirkwood/debug-macro.S
+++ /dev/null
@@ -1,20 +0,0 @@
-/*
- * include/asm-arm/arch-kirkwood/debug-macro.S
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <asm/arch/kirkwood.h>
-
-	.macro	addruart,rx
-	mrc	p15, 0, \rx, c1, c0
-	tst	\rx, #1					@ MMU enabled?
-	ldreq	\rx, =KIRKWOOD_REGS_PHYS_BASE
-	ldrne	\rx, =KIRKWOOD_REGS_VIRT_BASE
-	orr	\rx, \rx, #0x00012000
-	.endm
-
-#define UART_SHIFT	2
-#include <asm/hardware/debug-8250.S>
diff --git a/include/asm-arm/arch-kirkwood/entry-macro.S b/include/asm-arm/arch-kirkwood/entry-macro.S
deleted file mode 100644
index fc6a43d9355c..000000000000
--- a/include/asm-arm/arch-kirkwood/entry-macro.S
+++ /dev/null
@@ -1,40 +0,0 @@
-/*
- * include/asm-arm/arch-kirkwood/entry-macro.S
- *
- * Low-level IRQ helper macros for Marvell Kirkwood platforms
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <asm/arch/kirkwood.h>
-
-	.macro  disable_fiq
-	.endm
-
-	.macro  arch_ret_to_user, tmp1, tmp2
-	.endm
-
-	.macro  get_irqnr_preamble, base, tmp
-	ldr	\base, =IRQ_VIRT_BASE
-	.endm
-
-	.macro  get_irqnr_and_base, irqnr, irqstat, base, tmp
-	@ check low interrupts
-	ldr	\irqstat, [\base, #IRQ_CAUSE_LOW_OFF]
-	ldr	\tmp, [\base, #IRQ_MASK_LOW_OFF]
-	mov	\irqnr, #31
-	ands	\irqstat, \irqstat, \tmp
-	bne	1001f
-
-	@ if no low interrupts set, check high interrupts
-	ldr	\irqstat, [\base, #IRQ_CAUSE_HIGH_OFF]
-	ldr	\tmp, [\base, #IRQ_MASK_HIGH_OFF]
-	mov	\irqnr, #63
-	ands	\irqstat, \irqstat, \tmp
-
-	@ find first active interrupt source
-1001:	clzne	\irqstat, \irqstat
-	subne	\irqnr, \irqnr, \irqstat
-	.endm
diff --git a/include/asm-arm/arch-kirkwood/hardware.h b/include/asm-arm/arch-kirkwood/hardware.h
deleted file mode 100644
index e695719771a5..000000000000
--- a/include/asm-arm/arch-kirkwood/hardware.h
+++ /dev/null
@@ -1,21 +0,0 @@
-/*
- * include/asm-arm/arch-kirkwood/hardware.h
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ASM_ARCH_HARDWARE_H
-#define __ASM_ARCH_HARDWARE_H
-
-#include "kirkwood.h"
-
-#define pcibios_assign_all_busses()	1
-
-#define PCIBIOS_MIN_IO			0x00001000
-#define PCIBIOS_MIN_MEM			0x01000000
-#define PCIMEM_BASE			KIRKWOOD_PCIE_MEM_PHYS_BASE /* mem base for VGA */
-
-
-#endif
diff --git a/include/asm-arm/arch-kirkwood/io.h b/include/asm-arm/arch-kirkwood/io.h
deleted file mode 100644
index 0ef6e95f5d5b..000000000000
--- a/include/asm-arm/arch-kirkwood/io.h
+++ /dev/null
@@ -1,26 +0,0 @@
-/*
- * include/asm-arm/arch-kirkwood/io.h
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __ASM_ARCH_IO_H
-#define __ASM_ARCH_IO_H
-
-#include "kirkwood.h"
-
-#define IO_SPACE_LIMIT		0xffffffff
-
-static inline void __iomem *__io(unsigned long addr)
-{
-	return (void __iomem *)((addr - KIRKWOOD_PCIE_IO_PHYS_BASE)
-					+ KIRKWOOD_PCIE_IO_VIRT_BASE);
-}
-
-#define __io(a)			__io(a)
-#define __mem_pci(a)		(a)
-
-
-#endif
diff --git a/include/asm-arm/arch-kirkwood/irqs.h b/include/asm-arm/arch-kirkwood/irqs.h
deleted file mode 100644
index 2e7b5da6335c..000000000000
--- a/include/asm-arm/arch-kirkwood/irqs.h
+++ /dev/null
@@ -1,63 +0,0 @@
-/*
- * include/asm-arm/arch-kirkwood/irqs.h
- *
- * IRQ definitions for Marvell Kirkwood SoCs
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __ASM_ARCH_IRQS_H
-#define __ASM_ARCH_IRQS_H
-
-#include "kirkwood.h"	/* need GPIO_MAX */
-
-/*
- * Low Interrupt Controller
- */
-#define IRQ_KIRKWOOD_HIGH_SUM	0
-#define IRQ_KIRKWOOD_BRIDGE	1
-#define IRQ_KIRKWOOD_HOST2CPU	2
-#define IRQ_KIRKWOOD_CPU2HOST	3
-#define IRQ_KIRKWOOD_XOR_00	5
-#define IRQ_KIRKWOOD_XOR_01	6
-#define IRQ_KIRKWOOD_XOR_10	7
-#define IRQ_KIRKWOOD_XOR_11	8
-#define IRQ_KIRKWOOD_PCIE	9
-#define IRQ_KIRKWOOD_GE00_SUM	11
-#define IRQ_KIRKWOOD_GE01_SUM	15
-#define IRQ_KIRKWOOD_USB	19
-#define IRQ_KIRKWOOD_SATA	21
-#define IRQ_KIRKWOOD_CRYPTO	22
-#define IRQ_KIRKWOOD_SPI	23
-#define IRQ_KIRKWOOD_I2S	24
-#define IRQ_KIRKWOOD_TS_0	26
-#define IRQ_KIRKWOOD_SDIO	28
-#define IRQ_KIRKWOOD_TWSI	29
-#define IRQ_KIRKWOOD_AVB	30
-#define IRQ_KIRKWOOD_TDMI	31
-
-/*
- * High Interrupt Controller
- */
-#define IRQ_KIRKWOOD_UART_0	33
-#define IRQ_KIRKWOOD_UART_1	34
-#define IRQ_KIRKWOOD_GPIO_LOW_0_7	35
-#define IRQ_KIRKWOOD_GPIO_LOW_8_15	36
-#define IRQ_KIRKWOOD_GPIO_LOW_16_23	37
-#define IRQ_KIRKWOOD_GPIO_LOW_24_31	38
-#define IRQ_KIRKWOOD_GPIO_HIGH_0_7	39
-#define IRQ_KIRKWOOD_GPIO_HIGH_8_15	40
-#define IRQ_KIRKWOOD_GPIO_HIGH_16_23	41
-
-/*
- * KIRKWOOD General Purpose Pins
- */
-#define IRQ_KIRKWOOD_GPIO_START	64
-#define NR_GPIO_IRQS		GPIO_MAX
-
-#define NR_IRQS			(IRQ_KIRKWOOD_GPIO_START + NR_GPIO_IRQS)
-
-
-#endif
diff --git a/include/asm-arm/arch-kirkwood/memory.h b/include/asm-arm/arch-kirkwood/memory.h
deleted file mode 100644
index e5108f408ce6..000000000000
--- a/include/asm-arm/arch-kirkwood/memory.h
+++ /dev/null
@@ -1,14 +0,0 @@
-/*
- * include/asm-arm/arch-kirkwood/memory.h
- */
-
-#ifndef __ASM_ARCH_MEMORY_H
-#define __ASM_ARCH_MEMORY_H
-
-#define PHYS_OFFSET		UL(0x00000000)
-
-#define __virt_to_bus(x)	__virt_to_phys(x)
-#define __bus_to_virt(x)	__phys_to_virt(x)
-
-
-#endif
diff --git a/include/asm-arm/arch-kirkwood/system.h b/include/asm-arm/arch-kirkwood/system.h
deleted file mode 100644
index 8dde7e379855..000000000000
--- a/include/asm-arm/arch-kirkwood/system.h
+++ /dev/null
@@ -1,37 +0,0 @@
-/*
- * include/asm-arm/arch-kirkwood/system.h
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __ASM_ARCH_SYSTEM_H
-#define __ASM_ARCH_SYSTEM_H
-
-#include <asm/arch/hardware.h>
-#include <asm/arch/kirkwood.h>
-
-static inline void arch_idle(void)
-{
-	cpu_do_idle();
-}
-
-static inline void arch_reset(char mode)
-{
-	/*
-	 * Enable soft reset to assert RSTOUTn.
-	 */
-	writel(SOFT_RESET_OUT_EN, RSTOUTn_MASK);
-
-	/*
-	 * Assert soft reset.
-	 */
-	writel(SOFT_RESET, SYSTEM_SOFT_RESET);
-
-	while (1)
-		;
-}
-
-
-#endif
diff --git a/include/asm-arm/arch-kirkwood/timex.h b/include/asm-arm/arch-kirkwood/timex.h
deleted file mode 100644
index 82122e134e3c..000000000000
--- a/include/asm-arm/arch-kirkwood/timex.h
+++ /dev/null
@@ -1,11 +0,0 @@
-/*
- * include/asm-arm/arch-kirkwood/timex.h
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#define CLOCK_TICK_RATE		(100 * HZ)
-
-#define KIRKWOOD_TCLK		166666667
diff --git a/include/asm-arm/arch-kirkwood/uncompress.h b/include/asm-arm/arch-kirkwood/uncompress.h
deleted file mode 100644
index a9062b6d7680..000000000000
--- a/include/asm-arm/arch-kirkwood/uncompress.h
+++ /dev/null
@@ -1,47 +0,0 @@
-/*
- * include/asm-arm/arch-kirkwood/uncompress.h
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <linux/serial_reg.h>
-#include <asm/arch/kirkwood.h>
-
-#define SERIAL_BASE	((unsigned char *)UART0_PHYS_BASE)
-
-static void putc(const char c)
-{
-	unsigned char *base = SERIAL_BASE;
-	int i;
-
-	for (i = 0; i < 0x1000; i++) {
-		if (base[UART_LSR << 2] & UART_LSR_THRE)
-			break;
-		barrier();
-	}
-
-	base[UART_TX << 2] = c;
-}
-
-static void flush(void)
-{
-	unsigned char *base = SERIAL_BASE;
-	unsigned char mask;
-	int i;
-
-	mask = UART_LSR_TEMT | UART_LSR_THRE;
-
-	for (i = 0; i < 0x1000; i++) {
-		if ((base[UART_LSR << 2] & mask) == mask)
-			break;
-		barrier();
-	}
-}
-
-/*
- * nothing to do
- */
-#define arch_decomp_setup()
-#define arch_decomp_wdog()
diff --git a/include/asm-arm/arch-kirkwood/vmalloc.h b/include/asm-arm/arch-kirkwood/vmalloc.h
deleted file mode 100644
index 41852c6e77f3..000000000000
--- a/include/asm-arm/arch-kirkwood/vmalloc.h
+++ /dev/null
@@ -1,5 +0,0 @@
-/*
- * include/asm-arm/arch-kirkwood/vmalloc.h
- */
-
-#define VMALLOC_END	0xfe800000
diff --git a/include/asm-arm/arch-ks8695/debug-macro.S b/include/asm-arm/arch-ks8695/debug-macro.S
deleted file mode 100644
index cd5f2fb1f06e..000000000000
--- a/include/asm-arm/arch-ks8695/debug-macro.S
+++ /dev/null
@@ -1,38 +0,0 @@
-/*
- * include/asm-arm/arch-ks8695/debug-macro.S
- *
- * Copyright (C) 2006 Ben Dooks <ben@simtec.co.uk>
- * Copyright (C) 2006 Simtec Electronics
- *
- * KS8695 - Debug macros
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <asm/hardware.h>
-#include <asm/arch/regs-uart.h>
-
-	.macro	addruart, rx
-		mrc	p15, 0, \rx, c1, c0
-		tst	\rx, #1				@ MMU enabled?
-		ldreq	\rx, =KS8695_UART_PA		@ physical base address
-		ldrne	\rx, =KS8695_UART_VA		@ virtual base address
-	.endm
-
-	.macro	senduart, rd, rx
-		str	\rd, [\rx, #KS8695_URTH]	@ Write to Transmit Holding Register
-	.endm
-
-	.macro	busyuart, rd, rx
-1001:		ldr	\rd, [\rx, #KS8695_URLS]	@ Read Line Status Register
-		tst	\rd, #URLS_URTE			@ Holding & Shift registers empty?
-		beq	1001b
-	.endm
-
-	.macro	waituart, rd, rx
-1001:		ldr	\rd, [\rx, #KS8695_URLS]	@ Read Line Status Register
-		tst	\rd, #URLS_URTHRE		@ Holding Register empty?
-		beq	1001b
-	.endm
diff --git a/include/asm-arm/arch-ks8695/dma.h b/include/asm-arm/arch-ks8695/dma.h
deleted file mode 100644
index e5159ed42a4b..000000000000
--- a/include/asm-arm/arch-ks8695/dma.h
+++ /dev/null
@@ -1,17 +0,0 @@
-/*
- * include/asm-arm/arch-ks8695/dma.h
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
diff --git a/include/asm-arm/arch-ks8695/entry-macro.S b/include/asm-arm/arch-ks8695/entry-macro.S
deleted file mode 100644
index e34bdf85920e..000000000000
--- a/include/asm-arm/arch-ks8695/entry-macro.S
+++ /dev/null
@@ -1,53 +0,0 @@
-/*
- * include/asm-arm/arch-ks8695/entry-macro.S
- *
- * Copyright (C) 2006 Ben Dooks <ben@simtec.co.uk>
- * Copyright (C) 2006 Simtec Electronics
- *
- * Low-level IRQ helper macros for KS8695
- *
- * This file is licensed under  the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
-*/
-
-#include <asm/hardware.h>
-#include <asm/arch/regs-irq.h>
-
-	.macro	disable_fiq
-	.endm
-
-	.macro  get_irqnr_preamble, base, tmp
-		ldr	\base, =KS8695_IRQ_VA			@ Base address of interrupt controller
-	.endm
-
-	.macro  arch_ret_to_user, tmp1, tmp2
-	.endm
-
-	.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
-		ldr	\irqstat, [\base, #KS8695_INTMS]	@ Mask Status register
-
-		teq	\irqstat, #0
-		beq	1001f
-
-		mov	\irqnr, #0
-
-		tst	\irqstat, #0xff
-		moveq	\irqstat, \irqstat, lsr #8
-		addeq	\irqnr, \irqnr, #8
-		tsteq	\irqstat, #0xff
-		moveq	\irqstat, \irqstat, lsr #8
-		addeq	\irqnr, \irqnr, #8
-		tsteq	\irqstat, #0xff
-		moveq	\irqstat, \irqstat, lsr #8
-		addeq	\irqnr, \irqnr, #8
-		tst	\irqstat, #0x0f
-		moveq	\irqstat, \irqstat, lsr #4
-		addeq	\irqnr, \irqnr, #4
-		tst	\irqstat, #0x03
-		moveq	\irqstat, \irqstat, lsr #2
-		addeq	\irqnr, \irqnr, #2
-		tst	\irqstat, #0x01
-		addeqs	\irqnr, \irqnr, #1
-1001:
-	.endm
diff --git a/include/asm-arm/arch-ks8695/gpio.h b/include/asm-arm/arch-ks8695/gpio.h
deleted file mode 100644
index 65ceea28607b..000000000000
--- a/include/asm-arm/arch-ks8695/gpio.h
+++ /dev/null
@@ -1,79 +0,0 @@
-/*
- * include/asm-arm/arch-ks8695/gpio.h
- *
- * Copyright (C) 2006 Andrew Victor
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ASM_ARCH_GPIO_H_
-#define __ASM_ARCH_GPIO_H_
-
-#define KS8695_GPIO_0		0
-#define KS8695_GPIO_1		1
-#define KS8695_GPIO_2		2
-#define KS8695_GPIO_3		3
-#define KS8695_GPIO_4		4
-#define KS8695_GPIO_5		5
-#define KS8695_GPIO_6		6
-#define KS8695_GPIO_7		7
-#define KS8695_GPIO_8		8
-#define KS8695_GPIO_9		9
-#define KS8695_GPIO_10		10
-#define KS8695_GPIO_11		11
-#define KS8695_GPIO_12		12
-#define KS8695_GPIO_13		13
-#define KS8695_GPIO_14		14
-#define KS8695_GPIO_15		15
-
-
-/*
- * Configure GPIO pin as external interrupt source.
- */
-int __init_or_module ks8695_gpio_interrupt(unsigned int pin, unsigned int type);
-
-/*
- * Configure the GPIO line as an input.
- */
-int __init_or_module gpio_direction_input(unsigned int pin);
-
-/*
- * Configure the GPIO line as an output, with default state.
- */
-int __init_or_module gpio_direction_output(unsigned int pin, unsigned int state);
-
-/*
- * Set the state of an output GPIO line.
- */
-void gpio_set_value(unsigned int pin, unsigned int state);
-
-/*
- * Read the state of a GPIO line.
- */
-int gpio_get_value(unsigned int pin);
-
-/*
- * Map GPIO line to IRQ number.
- */
-int gpio_to_irq(unsigned int pin);
-
-/*
- * Map IRQ number to GPIO line.
- */
-int irq_to_gpio(unsigned int irq);
-
-
-#include <asm-generic/gpio.h>
-
-static inline int gpio_request(unsigned int pin, const char *label)
-{
-	return 0;
-}
-
-static inline void gpio_free(unsigned int pin)
-{
-}
-
-#endif
diff --git a/include/asm-arm/arch-ks8695/hardware.h b/include/asm-arm/arch-ks8695/hardware.h
deleted file mode 100644
index cb732bff3288..000000000000
--- a/include/asm-arm/arch-ks8695/hardware.h
+++ /dev/null
@@ -1,49 +0,0 @@
-/*
- * include/asm-arm/arch-ks8695/hardware.h
- *
- * Copyright (C) 2006 Ben Dooks <ben@simtec.co.uk>
- * Copyright (C) 2006 Simtec Electronics
- *
- * KS8695 - Memory Map definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_HARDWARE_H
-#define __ASM_ARCH_HARDWARE_H
-
-#include <asm/sizes.h>
-
-/*
- * Physical RAM address.
- */
-#define KS8695_SDRAM_PA		0x00000000
-
-
-/*
- * We map an entire MiB with the System Configuration Registers in even
- * though only 64KiB is needed. This makes it easier for use with the
- * head debug code as the initial MMU setup only deals in L1 sections.
- */
-#define KS8695_IO_PA		0x03F00000
-#define KS8695_IO_VA		0xF0000000
-#define KS8695_IO_SIZE		SZ_1M
-
-#define KS8695_PCIMEM_PA	0x60000000
-#define KS8695_PCIMEM_SIZE	SZ_512M
-
-#define KS8695_PCIIO_PA		0x80000000
-#define KS8695_PCIIO_SIZE	SZ_64K
-
-
-/*
- * PCI support
- */
-#define pcibios_assign_all_busses()	1
-
-#define PCIBIOS_MIN_IO		0
-#define PCIBIOS_MIN_MEM		0
-
-#endif
diff --git a/include/asm-arm/arch-ks8695/io.h b/include/asm-arm/arch-ks8695/io.h
deleted file mode 100644
index 8edc4bd6aadf..000000000000
--- a/include/asm-arm/arch-ks8695/io.h
+++ /dev/null
@@ -1,19 +0,0 @@
-/*
- * include/asm-arm/arch-ks8695/io.h
- *
- * Copyright (C) 2006 Andrew Victor
- *
- * This file is licensed under  the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __ASM_ARCH_IO_H
-#define __ASM_ARCH_IO_H
-
-#define IO_SPACE_LIMIT		0xffffffff
-
-#define __io(a)			((void __iomem *)(a))
-#define __mem_pci(a)		(a)
-
-#endif
diff --git a/include/asm-arm/arch-ks8695/irqs.h b/include/asm-arm/arch-ks8695/irqs.h
deleted file mode 100644
index 8b1c4fe96a81..000000000000
--- a/include/asm-arm/arch-ks8695/irqs.h
+++ /dev/null
@@ -1,54 +0,0 @@
-/*
- * linux/include/asm-arm/arch-ks8695/irqs.h
- *
- * Copyright (C) 2006 Simtec Electronics
- *   Ben Dooks <ben@simtec.co.uk>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ASM_ARCH_IRQS_H
-#define __ASM_ARCH_IRQS_H
-
-
-#define NR_IRQS				32
-
-/*
- * IRQ definitions
- */
-#define KS8695_IRQ_COMM_RX		0
-#define KS8695_IRQ_COMM_TX		1
-#define KS8695_IRQ_EXTERN0		2
-#define KS8695_IRQ_EXTERN1		3
-#define KS8695_IRQ_EXTERN2		4
-#define KS8695_IRQ_EXTERN3		5
-#define KS8695_IRQ_TIMER0		6
-#define KS8695_IRQ_TIMER1		7
-#define KS8695_IRQ_UART_TX		8
-#define KS8695_IRQ_UART_RX		9
-#define KS8695_IRQ_UART_LINE_STATUS	10
-#define KS8695_IRQ_UART_MODEM_STATUS	11
-#define KS8695_IRQ_LAN_RX_STOP		12
-#define KS8695_IRQ_LAN_TX_STOP		13
-#define KS8695_IRQ_LAN_RX_BUF		14
-#define KS8695_IRQ_LAN_TX_BUF		15
-#define KS8695_IRQ_LAN_RX_STATUS	16
-#define KS8695_IRQ_LAN_TX_STATUS	17
-#define KS8695_IRQ_HPNA_RX_STOP		18
-#define KS8695_IRQ_HPNA_TX_STOP		19
-#define KS8695_IRQ_HPNA_RX_BUF		20
-#define KS8695_IRQ_HPNA_TX_BUF		21
-#define KS8695_IRQ_HPNA_RX_STATUS	22
-#define KS8695_IRQ_HPNA_TX_STATUS	23
-#define KS8695_IRQ_BUS_ERROR		24
-#define KS8695_IRQ_WAN_RX_STOP		25
-#define KS8695_IRQ_WAN_TX_STOP		26
-#define KS8695_IRQ_WAN_RX_BUF		27
-#define KS8695_IRQ_WAN_TX_BUF		28
-#define KS8695_IRQ_WAN_RX_STATUS	29
-#define KS8695_IRQ_WAN_TX_STATUS	30
-#define KS8695_IRQ_WAN_LINK		31
-
-#endif
diff --git a/include/asm-arm/arch-ks8695/memory.h b/include/asm-arm/arch-ks8695/memory.h
deleted file mode 100644
index 24f6a6e4a302..000000000000
--- a/include/asm-arm/arch-ks8695/memory.h
+++ /dev/null
@@ -1,49 +0,0 @@
-/*
- * include/asm-arm/arch-ks8695/memory.h
- *
- * Copyright (C) 2006 Andrew Victor
- *
- * KS8695 Memory definitions
- *
- * This file is licensed under  the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __ASM_ARCH_MEMORY_H
-#define __ASM_ARCH_MEMORY_H
-
-#include <asm/hardware.h>
-
-/*
- * Physical SRAM offset.
- */
-#define PHYS_OFFSET		KS8695_SDRAM_PA
-
-#ifndef __ASSEMBLY__
-
-#ifdef CONFIG_PCI
-
-/* PCI mappings */
-#define __virt_to_bus(x)	((x) - PAGE_OFFSET + KS8695_PCIMEM_PA)
-#define __bus_to_virt(x)	((x) - KS8695_PCIMEM_PA + PAGE_OFFSET)
-
-/* Platform-bus mapping */
-extern struct bus_type platform_bus_type;
-#define is_lbus_device(dev)		(dev && dev->bus == &platform_bus_type)
-#define __arch_dma_to_virt(dev, x)	({ is_lbus_device(dev) ? \
-					__phys_to_virt(x) : __bus_to_virt(x); })
-#define __arch_virt_to_dma(dev, x)	({ is_lbus_device(dev) ? \
-					(dma_addr_t)__virt_to_phys(x) : (dma_addr_t)__virt_to_bus(x); })
-#define __arch_page_to_dma(dev, x)	__arch_virt_to_dma(dev, page_address(x))
-
-#else
-
-#define __virt_to_bus(x)	__virt_to_phys(x)
-#define __bus_to_virt(x)	__phys_to_virt(x)
-
-#endif
-
-#endif
-
-#endif
diff --git a/include/asm-arm/arch-ks8695/regs-gpio.h b/include/asm-arm/arch-ks8695/regs-gpio.h
deleted file mode 100644
index 6b95d77aea19..000000000000
--- a/include/asm-arm/arch-ks8695/regs-gpio.h
+++ /dev/null
@@ -1,55 +0,0 @@
-/*
- * include/asm-arm/arch-ks8695/regs-gpio.h
- *
- * Copyright (C) 2007 Andrew Victor
- *
- * KS8695 - GPIO control registers and bit definitions.
- *
- * This file is licensed under  the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef KS8695_GPIO_H
-#define KS8695_GPIO_H
-
-#define KS8695_GPIO_OFFSET	(0xF0000 + 0xE600)
-#define KS8695_GPIO_VA		(KS8695_IO_VA + KS8695_GPIO_OFFSET)
-#define KS8695_GPIO_PA		(KS8695_IO_PA + KS8695_GPIO_OFFSET)
-
-
-#define KS8695_IOPM		(0x00)		/* I/O Port Mode Register */
-#define KS8695_IOPC		(0x04)		/* I/O Port Control Register */
-#define KS8695_IOPD		(0x08)		/* I/O Port Data Register */
-
-
-/* Port Mode Register */
-#define IOPM_(x)		(1 << (x))	/* Mode for GPIO Pin x */
-
-/* Port Control Register */
-#define IOPC_IOTIM1EN		(1 << 17)	/* GPIO Pin for Timer1 Enable */
-#define IOPC_IOTIM0EN		(1 << 16)	/* GPIO Pin for Timer0 Enable */
-#define IOPC_IOEINT3EN		(1 << 15)	/* GPIO Pin for External/Soft Interrupt 3 Enable */
-#define IOPC_IOEINT3TM		(7 << 12)	/* GPIO Pin for External/Soft Interrupt 3 Trigger Mode */
-#define IOPC_IOEINT3_MODE(x)	((x) << 12)
-#define IOPC_IOEINT2EN		(1 << 11)	/* GPIO Pin for External/Soft Interrupt 2 Enable */
-#define IOPC_IOEINT2TM		(7 << 8)	/* GPIO Pin for External/Soft Interrupt 2 Trigger Mode */
-#define IOPC_IOEINT2_MODE(x)	((x) << 8)
-#define IOPC_IOEINT1EN		(1 << 7)	/* GPIO Pin for External/Soft Interrupt 1 Enable */
-#define IOPC_IOEINT1TM		(7 << 4)	/* GPIO Pin for External/Soft Interrupt 1 Trigger Mode */
-#define IOPC_IOEINT1_MODE(x)	((x) << 4)
-#define IOPC_IOEINT0EN		(1 << 3)	/* GPIO Pin for External/Soft Interrupt 0 Enable */
-#define IOPC_IOEINT0TM		(7 << 0)	/* GPIO Pin for External/Soft Interrupt 0 Trigger Mode */
-#define IOPC_IOEINT0_MODE(x)	((x) << 0)
-
- /* Trigger Modes */
-#define IOPC_TM_LOW		(0)		/* Level Detection (Active Low) */
-#define IOPC_TM_HIGH		(1)		/* Level Detection (Active High) */
-#define IOPC_TM_RISING		(2)		/* Rising Edge Detection */
-#define IOPC_TM_FALLING		(4)		/* Falling Edge Detection */
-#define IOPC_TM_EDGE		(6)		/* Both Edge Detection */
-
-/* Port Data Register */
-#define IOPD_(x)		(1 << (x))	/* Signal Level of GPIO Pin x */
-
-#endif
diff --git a/include/asm-arm/arch-ks8695/regs-irq.h b/include/asm-arm/arch-ks8695/regs-irq.h
deleted file mode 100644
index 70b193f6b756..000000000000
--- a/include/asm-arm/arch-ks8695/regs-irq.h
+++ /dev/null
@@ -1,41 +0,0 @@
-/*
- * include/asm-arm/arch-ks8695/regs-irq.h
- *
- * Copyright (C) 2006 Ben Dooks <ben@simtec.co.uk>
- * Copyright (C) 2006 Simtec Electronics
- *
- * KS8695 - IRQ registers and bit definitions
- *
- * This file is licensed under  the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef KS8695_IRQ_H
-#define KS8695_IRQ_H
-
-#define KS8695_IRQ_OFFSET	(0xF0000 + 0xE200)
-#define KS8695_IRQ_VA		(KS8695_IO_VA + KS8695_IRQ_OFFSET)
-#define KS8695_IRQ_PA		(KS8695_IO_PA + KS8695_IRQ_OFFSET)
-
-
-/*
- * Interrupt Controller registers
- */
-#define KS8695_INTMC		(0x00)		/* Mode Control Register */
-#define KS8695_INTEN		(0x04)		/* Interrupt Enable Register */
-#define KS8695_INTST		(0x08)		/* Interrupt Status Register */
-#define KS8695_INTPW		(0x0c)		/* Interrupt Priority (WAN MAC) */
-#define KS8695_INTPH		(0x10)		/* Interrupt Priority (HPNA) [KS8695 only] */
-#define KS8695_INTPL		(0x14)		/* Interrupt Priority (LAN MAC) */
-#define KS8695_INTPT		(0x18)		/* Interrupt Priority (Timer) */
-#define KS8695_INTPU		(0x1c)		/* Interrupt Priority (UART) */
-#define KS8695_INTPE		(0x20)		/* Interrupt Priority (External Interrupt) */
-#define KS8695_INTPC		(0x24)		/* Interrupt Priority (Communications Channel) */
-#define KS8695_INTPBE		(0x28)		/* Interrupt Priority (Bus Error Response) */
-#define KS8695_INTMS		(0x2c)		/* Interrupt Mask Status Register */
-#define KS8695_INTHPF		(0x30)		/* Interrupt Pending Highest Priority (FIQ) */
-#define KS8695_INTHPI		(0x34)		/* Interrupt Pending Highest Priority (IRQ) */
-
-
-#endif
diff --git a/include/asm-arm/arch-ks8695/regs-mem.h b/include/asm-arm/arch-ks8695/regs-mem.h
deleted file mode 100644
index 76b38e0862e6..000000000000
--- a/include/asm-arm/arch-ks8695/regs-mem.h
+++ /dev/null
@@ -1,89 +0,0 @@
-/*
- * include/asm-arm/arch-ks8695/regs-mem.h
- *
- * Copyright (C) 2006 Andrew Victor
- *
- * KS8695 - Memory Controller registers and bit definitions
- *
- * This file is licensed under  the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef KS8695_MEM_H
-#define KS8695_MEM_H
-
-#define KS8695_MEM_OFFSET	(0xF0000 + 0x4000)
-#define KS8695_MEM_VA		(KS8695_IO_VA + KS8695_MEM_OFFSET)
-#define KS8695_MEM_PA		(KS8695_IO_PA + KS8695_MEM_OFFSET)
-
-
-/*
- * Memory Controller Registers
- */
-#define KS8695_EXTACON0		(0x00)		/* External I/O 0 Access Control */
-#define KS8695_EXTACON1		(0x04)		/* External I/O 1 Access Control */
-#define KS8695_EXTACON2		(0x08)		/* External I/O 2 Access Control */
-#define KS8695_ROMCON0		(0x10)		/* ROM/SRAM/Flash 1 Control Register */
-#define KS8695_ROMCON1		(0x14)		/* ROM/SRAM/Flash 2 Control Register */
-#define KS8695_ERGCON		(0x20)		/* External I/O and ROM/SRAM/Flash General Register */
-#define KS8695_SDCON0		(0x30)		/* SDRAM Control Register 0 */
-#define KS8695_SDCON1		(0x34)		/* SDRAM Control Register 1 */
-#define KS8695_SDGCON		(0x38)		/* SDRAM General Control */
-#define KS8695_SDBCON		(0x3c)		/* SDRAM Buffer Control */
-#define KS8695_REFTIM		(0x40)		/* SDRAM Refresh Timer */
-
-
-/* External I/O Access Control Registers */
-#define EXTACON_EBNPTR		(0x3ff << 22)		/* Last Address Pointer */
-#define EXTACON_EBBPTR		(0x3ff << 12)		/* Base Pointer */
-#define EXTACON_EBTACT		(7     <<  9)		/* Write Enable/Output Enable Active Time */
-#define EXTACON_EBTCOH		(7     <<  6)		/* Chip Select Hold Time */
-#define EXTACON_EBTACS		(7     <<  3)		/* Address Setup Time before ECSN */
-#define EXTACON_EBTCOS		(7     <<  0)		/* Chip Select Time before OEN */
-
-/* ROM/SRAM/Flash Control Register */
-#define ROMCON_RBNPTR		(0x3ff << 22)		/* Next Pointer */
-#define ROMCON_RBBPTR		(0x3ff << 12)		/* Base Pointer */
-#define ROMCON_RBTACC		(7     <<  4)		/* Access Cycle Time */
-#define ROMCON_RBTPA		(3     <<  2)		/* Page Address Access Time */
-#define ROMCON_PMC		(3     <<  0)		/* Page Mode Configuration */
-#define		PMC_NORMAL		(0 << 0)
-#define		PMC_4WORD		(1 << 0)
-#define		PMC_8WORD		(2 << 0)
-#define		PMC_16WORD		(3 << 0)
-
-/* External I/O and ROM/SRAM/Flash General Register */
-#define ERGCON_TMULT		(3 << 28)		/* Time Multiplier */
-#define ERGCON_DSX2		(3 << 20)		/* Data Width (External I/O Bank 2) */
-#define ERGCON_DSX1		(3 << 18)		/* Data Width (External I/O Bank 1) */
-#define ERGCON_DSX0		(3 << 16)		/* Data Width (External I/O Bank 0) */
-#define ERGCON_DSR1		(3 <<  2)		/* Data Width (ROM/SRAM/Flash Bank 1) */
-#define ERGCON_DSR0		(3 <<  0)		/* Data Width (ROM/SRAM/Flash Bank 0) */
-
-/* SDRAM Control Register */
-#define SDCON_DBNPTR		(0x3ff << 22)		/* Last Address Pointer */
-#define SDCON_DBBPTR		(0x3ff << 12)		/* Base Pointer */
-#define SDCON_DBCAB		(3     <<  8)		/* Column Address Bits */
-#define SDCON_DBBNUM		(1     <<  3)		/* Number of Banks */
-#define SDCON_DBDBW		(3     <<  1)		/* Data Bus Width */
-
-/* SDRAM General Control Register */
-#define SDGCON_SDTRC		(3 << 2)		/* RAS to CAS latency */
-#define SDGCON_SDCAS		(3 << 0)		/* CAS latency */
-
-/* SDRAM Buffer Control Register */
-#define SDBCON_SDESTA		(1 << 31)		/* SDRAM Engine Status */
-#define SDBCON_RBUFBDIS		(1 << 24)		/* Read Buffer Burst Enable */
-#define SDBCON_WFIFOEN		(1 << 23)		/* Write FIFO Enable */
-#define SDBCON_RBUFEN		(1 << 22)		/* Read Buffer Enable */
-#define SDBCON_FLUSHWFIFO	(1 << 21)		/* Flush Write FIFO */
-#define SDBCON_RBUFINV		(1 << 20)		/* Read Buffer Invalidate */
-#define SDBCON_SDINI		(3 << 16)		/* SDRAM Initialization Control */
-#define SDBCON_SDMODE		(0x3fff << 0)		/* SDRAM Mode Register Value Program */
-
-/* SDRAM Refresh Timer Register */
-#define REFTIM_REFTIM		(0xffff << 0)		/* Refresh Timer Value */
-
-
-#endif
diff --git a/include/asm-arm/arch-ks8695/system.h b/include/asm-arm/arch-ks8695/system.h
deleted file mode 100644
index 3bc28106d937..000000000000
--- a/include/asm-arm/arch-ks8695/system.h
+++ /dev/null
@@ -1,48 +0,0 @@
-/*
- * include/asm-arm/arch-s3c2410/system.h
- *
- * Copyright (C) 2006 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * KS8695 - System function defines and includes
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ASM_ARCH_SYSTEM_H
-#define __ASM_ARCH_SYSTEM_H
-
-#include <asm/io.h>
-#include <asm/arch/regs-timer.h>
-
-static void arch_idle(void)
-{
-	/*
-	 * This should do all the clock switching
-	 * and wait for interrupt tricks,
-	 */
-	cpu_do_idle();
-
-}
-
-static void arch_reset(char mode)
-{
-	unsigned int reg;
-
-	if (mode == 's')
-		cpu_reset(0);
-
-	/* disable timer0 */
-	reg = __raw_readl(KS8695_TMR_VA + KS8695_TMCON);
-	__raw_writel(reg & ~TMCON_T0EN, KS8695_TMR_VA + KS8695_TMCON);
-
-	/* enable watchdog mode */
-	__raw_writel((10 << 8) | T0TC_WATCHDOG, KS8695_TMR_VA + KS8695_T0TC);
-
-	/* re-enable timer0 */
-	__raw_writel(reg | TMCON_T0EN, KS8695_TMR_VA + KS8695_TMCON);
-}
-
-#endif
diff --git a/include/asm-arm/arch-ks8695/timex.h b/include/asm-arm/arch-ks8695/timex.h
deleted file mode 100644
index 8320d528b903..000000000000
--- a/include/asm-arm/arch-ks8695/timex.h
+++ /dev/null
@@ -1,20 +0,0 @@
-/*
- * include/asm-arm/arch-ks8695/timex.h
- *
- * Copyright (C) 2006 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * KS8695 - Time Parameters
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ASM_ARCH_TIMEX_H
-#define __ASM_ARCH_TIMEX_H
-
-/* timers are derived from MCLK, which is 25MHz */
-#define CLOCK_TICK_RATE 25000000
-
-#endif
diff --git a/include/asm-arm/arch-ks8695/uncompress.h b/include/asm-arm/arch-ks8695/uncompress.h
deleted file mode 100644
index 733a50855b5d..000000000000
--- a/include/asm-arm/arch-ks8695/uncompress.h
+++ /dev/null
@@ -1,37 +0,0 @@
-/*
- * include/asm-arm/arch-ks8695/uncompress.h
- *
- * Copyright (C) 2006 Ben Dooks <ben@simtec.co.uk>
- * Copyright (C) 2006 Simtec Electronics
- *
- * KS8695 - Kernel uncompressor
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ASM_ARCH_UNCOMPRESS_H
-#define __ASM_ARCH_UNCOMPRESS_H
-
-#include <asm/io.h>
-#include <asm/arch/regs-uart.h>
-
-static void putc(char c)
-{
-	while (!(__raw_readl(KS8695_UART_PA + KS8695_URLS) & URLS_URTHRE))
-		barrier();
-
-	__raw_writel(c, KS8695_UART_PA + KS8695_URTH);
-}
-
-static inline void flush(void)
-{
-	while (!(__raw_readl(KS8695_UART_PA + KS8695_URLS) & URLS_URTE))
-		barrier();
-}
-
-#define arch_decomp_setup()
-#define arch_decomp_wdog()
-
-#endif
diff --git a/include/asm-arm/arch-ks8695/vmalloc.h b/include/asm-arm/arch-ks8695/vmalloc.h
deleted file mode 100644
index d1d88e58117d..000000000000
--- a/include/asm-arm/arch-ks8695/vmalloc.h
+++ /dev/null
@@ -1,19 +0,0 @@
-/*
- * include/asm-arm/arch-ks8695/vmalloc.h
- *
- * Copyright (C) 2006 Ben Dooks
- * Copyright (C) 2006 Simtec Electronics <linux@simtec.co.uk>
- *
- * KS8695 vmalloc definition
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ASM_ARCH_VMALLOC_H
-#define __ASM_ARCH_VMALLOC_H
-
-#define VMALLOC_END	  (KS8695_IO_VA & PGDIR_MASK)
-
-#endif
diff --git a/include/asm-arm/arch-l7200/debug-macro.S b/include/asm-arm/arch-l7200/debug-macro.S
deleted file mode 100644
index 846473318e8b..000000000000
--- a/include/asm-arm/arch-l7200/debug-macro.S
+++ /dev/null
@@ -1,40 +0,0 @@
-/* linux/include/asm-arm/arch-l7200/debug-macro.S
- *
- * Debugging macro include header
- *
- *  Copyright (C) 1994-1999 Russell King
- *  Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
-*/
-
-		.equ	io_virt, IO_BASE
-		.equ	io_phys, IO_START
-
-		.macro	addruart,rx
-		mrc	p15, 0, \rx, c1, c0
-		tst	\rx, #1			@ MMU enabled?
-		moveq	\rx, #io_phys		@ physical base address
-		movne	\rx, #io_virt		@ virtual address
-		add	\rx, \rx, #0x00044000	@ UART1
-@		add	\rx, \rx, #0x00045000	@ UART2
-		.endm
-
-		.macro	senduart,rd,rx
-		str	\rd, [\rx, #0x0]	@ UARTDR
-		.endm
-
-		.macro	waituart,rd,rx
-1001:		ldr	\rd, [\rx, #0x18]	@ UARTFLG
-		tst	\rd, #1 << 5		@ UARTFLGUTXFF - 1 when full
-		bne	1001b
-		.endm
-
-		.macro	busyuart,rd,rx
-1001:		ldr	\rd, [\rx, #0x18]	@ UARTFLG
-		tst	\rd, #1 << 3		@ UARTFLGUBUSY - 1 when busy
-		bne	1001b
-		.endm
diff --git a/include/asm-arm/arch-l7200/dma.h b/include/asm-arm/arch-l7200/dma.h
deleted file mode 100644
index 4c7eca63f035..000000000000
--- a/include/asm-arm/arch-l7200/dma.h
+++ /dev/null
@@ -1,23 +0,0 @@
-/*
- * linux/include/asm-arm/arch-l7200/dma.h
- *
- * Copyright (C) 2000 Steve Hill (sjhill@cotw.com)
- *
- * Changelog:
- *  08-29-2000	SJH	Created
- */
-#ifndef __ASM_ARCH_DMA_H
-#define __ASM_ARCH_DMA_H
-
-/* DMA is not yet implemented! It should be the same as acorn, copy over.. */
-
-/*
- * This is the maximum DMA address that can be DMAd to.
- * There should not be more than (0xd0000000 - 0xc0000000)
- * bytes of RAM.
- */
-#define MAX_DMA_ADDRESS         0xd0000000
-
-#define DMA_S0                  0
-
-#endif /* _ASM_ARCH_DMA_H */
diff --git a/include/asm-arm/arch-l7200/entry-macro.S b/include/asm-arm/arch-l7200/entry-macro.S
deleted file mode 100644
index 63411d3e9df4..000000000000
--- a/include/asm-arm/arch-l7200/entry-macro.S
+++ /dev/null
@@ -1,35 +0,0 @@
-/*
- * include/asm-arm/arch-l7200/entry-macro.S
- *
- * Low-level IRQ helper macros for L7200-based platforms
- *
- * This file is licensed under  the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-#include <asm/hardware.h>
-
-		.equ	irq_base_addr,	IO_BASE_2
-
-		.macro  disable_fiq
-		.endm
-
-		.macro  get_irqnr_preamble, base, tmp
-		.endm
-
-		.macro  arch_ret_to_user, tmp1, tmp2
-		.endm
-
-		.macro  get_irqnr_and_base, irqnr, irqstat, base, tmp
-		mov     \irqstat, #irq_base_addr		@ Virt addr IRQ regs
-		add	\irqstat, \irqstat, #0x00001000		@ Status reg
-		ldr     \irqstat, [\irqstat, #0]		@ get interrupts
-		mov     \irqnr, #0
-1001:		tst     \irqstat, #1
-		addeq   \irqnr, \irqnr, #1
-		moveq   \irqstat, \irqstat, lsr #1
-		tsteq   \irqnr, #32
-		beq     1001b
-		teq     \irqnr, #32
-		.endm
-
diff --git a/include/asm-arm/arch-l7200/gpio.h b/include/asm-arm/arch-l7200/gpio.h
deleted file mode 100644
index 0b63e4239bdd..000000000000
--- a/include/asm-arm/arch-l7200/gpio.h
+++ /dev/null
@@ -1,105 +0,0 @@
-/****************************************************************************/
-/*
- *      linux/include/asm-arm/arch-l7200/gpio.h
- *
- *      Registers and  helper functions for the L7200 Link-Up Systems
- *      GPIO.
- *
- *      (C) Copyright 2000, S A McConnell  (samcconn@cotw.com)
- *
- *  This file is subject to the terms and conditions of the GNU General Public
- *  License. See the file COPYING in the main directory of this archive for
- *  more details.
- */
-
-/****************************************************************************/
-
-#define GPIO_OFF   0x00005000  /* Offset from IO_START to the GPIO reg's. */
-
-/* IO_START and IO_BASE are defined in hardware.h */
-
-#define GPIO_START (IO_START_2 + GPIO_OFF) /* Physical addr of the GPIO reg. */
-#define GPIO_BASE  (IO_BASE_2  + GPIO_OFF) /* Virtual addr of the GPIO reg. */
-
-/* Offsets from the start of the GPIO for all the registers. */
-#define PADR_OFF     0x000
-#define PADDR_OFF    0x004
-#define PASBSR_OFF   0x008
-#define PAEENR_OFF   0x00c
-#define PAESNR_OFF   0x010
-#define PAESTR_OFF   0x014
-#define PAIMR_OFF    0x018
-#define PAINT_OFF    0x01c
-
-#define PBDR_OFF     0x020
-#define PBDDR_OFF    0x024
-#define PBSBSR_OFF   0x028
-#define PBIMR_OFF    0x038
-#define PBINT_OFF    0x03c
-
-#define PCDR_OFF     0x040
-#define PCDDR_OFF    0x044
-#define PCSBSR_OFF   0x048
-#define PCIMR_OFF    0x058
-#define PCINT_OFF    0x05c
-
-#define PDDR_OFF     0x060
-#define PDDDR_OFF    0x064
-#define PDSBSR_OFF   0x068
-#define PDEENR_OFF   0x06c
-#define PDESNR_OFF   0x070
-#define PDESTR_OFF   0x074
-#define PDIMR_OFF    0x078
-#define PDINT_OFF    0x07c
-
-#define PEDR_OFF     0x080
-#define PEDDR_OFF    0x084
-#define PESBSR_OFF   0x088
-#define PEEENR_OFF   0x08c
-#define PEESNR_OFF   0x090
-#define PEESTR_OFF   0x094
-#define PEIMR_OFF    0x098
-#define PEINT_OFF    0x09c
-
-/* Define the GPIO registers for use by device drivers and the kernel. */
-#define PADR   (*(volatile unsigned long *)(GPIO_BASE+PADR_OFF))
-#define PADDR  (*(volatile unsigned long *)(GPIO_BASE+PADDR_OFF))
-#define PASBSR (*(volatile unsigned long *)(GPIO_BASE+PASBSR_OFF))
-#define PAEENR (*(volatile unsigned long *)(GPIO_BASE+PAEENR_OFF))
-#define PAESNR (*(volatile unsigned long *)(GPIO_BASE+PAESNR_OFF))
-#define PAESTR (*(volatile unsigned long *)(GPIO_BASE+PAESTR_OFF))
-#define PAIMR  (*(volatile unsigned long *)(GPIO_BASE+PAIMR_OFF))
-#define PAINT  (*(volatile unsigned long *)(GPIO_BASE+PAINT_OFF))
-
-#define PBDR   (*(volatile unsigned long *)(GPIO_BASE+PBDR_OFF))
-#define PBDDR  (*(volatile unsigned long *)(GPIO_BASE+PBDDR_OFF))
-#define PBSBSR (*(volatile unsigned long *)(GPIO_BASE+PBSBSR_OFF))
-#define PBIMR  (*(volatile unsigned long *)(GPIO_BASE+PBIMR_OFF))
-#define PBINT  (*(volatile unsigned long *)(GPIO_BASE+PBINT_OFF))
-
-#define PCDR   (*(volatile unsigned long *)(GPIO_BASE+PCDR_OFF))
-#define PCDDR  (*(volatile unsigned long *)(GPIO_BASE+PCDDR_OFF))
-#define PCSBSR (*(volatile unsigned long *)(GPIO_BASE+PCSBSR_OFF))
-#define PCIMR  (*(volatile unsigned long *)(GPIO_BASE+PCIMR_OFF))
-#define PCINT  (*(volatile unsigned long *)(GPIO_BASE+PCINT_OFF))
-
-#define PDDR   (*(volatile unsigned long *)(GPIO_BASE+PDDR_OFF))
-#define PDDDR  (*(volatile unsigned long *)(GPIO_BASE+PDDDR_OFF))
-#define PDSBSR (*(volatile unsigned long *)(GPIO_BASE+PDSBSR_OFF))
-#define PDEENR (*(volatile unsigned long *)(GPIO_BASE+PDEENR_OFF))
-#define PDESNR (*(volatile unsigned long *)(GPIO_BASE+PDESNR_OFF))
-#define PDESTR (*(volatile unsigned long *)(GPIO_BASE+PDESTR_OFF))
-#define PDIMR  (*(volatile unsigned long *)(GPIO_BASE+PDIMR_OFF))
-#define PDINT  (*(volatile unsigned long *)(GPIO_BASE+PDINT_OFF))
-
-#define PEDR   (*(volatile unsigned long *)(GPIO_BASE+PEDR_OFF))
-#define PEDDR  (*(volatile unsigned long *)(GPIO_BASE+PEDDR_OFF))
-#define PESBSR (*(volatile unsigned long *)(GPIO_BASE+PESBSR_OFF))
-#define PEEENR (*(volatile unsigned long *)(GPIO_BASE+PEEENR_OFF))
-#define PEESNR (*(volatile unsigned long *)(GPIO_BASE+PEESNR_OFF))
-#define PEESTR (*(volatile unsigned long *)(GPIO_BASE+PEESTR_OFF))
-#define PEIMR  (*(volatile unsigned long *)(GPIO_BASE+PEIMR_OFF))
-#define PEINT  (*(volatile unsigned long *)(GPIO_BASE+PEINT_OFF))
-
-#define VEE_EN         0x02
-#define BACKLIGHT_EN   0x04
diff --git a/include/asm-arm/arch-l7200/hardware.h b/include/asm-arm/arch-l7200/hardware.h
deleted file mode 100644
index 2ab43f3a4a8d..000000000000
--- a/include/asm-arm/arch-l7200/hardware.h
+++ /dev/null
@@ -1,57 +0,0 @@
-/*
- * linux/include/asm-arm/arch-l7200/hardware.h
- *
- * Copyright (C) 2000 Rob Scott (rscott@mtrob.fdns.net)
- *                    Steve Hill (sjhill@cotw.com)
- *
- * This file contains the hardware definitions for the 
- * LinkUp Systems L7200 SOC development board.
- *
- * Changelog:
- *   02-01-2000	 RS	Created L7200 version, derived from rpc code
- *   03-21-2000	SJH	Cleaned up file
- *   04-21-2000	 RS 	Changed mapping of I/O in virtual space
- *   04-25-2000	SJH	Removed unused symbols and such
- *   05-05-2000	SJH	Complete rewrite
- *   07-31-2000	SJH	Added undocumented debug auxillary port to
- *			get at last two columns for keyboard driver
- */
-#ifndef __ASM_ARCH_HARDWARE_H
-#define __ASM_ARCH_HARDWARE_H
-
-/* Hardware addresses of major areas.
- *  *_START is the physical address
- *  *_SIZE  is the size of the region
- *  *_BASE  is the virtual address
- */
-#define RAM_START		0xf0000000
-#define RAM_SIZE		0x02000000
-#define RAM_BASE		0xc0000000
-
-#define IO_START		0x80000000      /* I/O */
-#define IO_SIZE			0x01000000
-#define IO_BASE			0xd0000000
-
-#define IO_START_2		0x90000000      /* I/O */
-#define IO_SIZE_2		0x01000000
-#define IO_BASE_2		0xd1000000
-
-#define AUX_START		0x1a000000      /* AUX PORT */
-#define AUX_SIZE 		0x01000000
-#define AUX_BASE		0xd2000000
-
-#define FLASH1_START		0x00000000      /* FLASH BANK 1 */
-#define FLASH1_SIZE 		0x01000000
-#define FLASH1_BASE		0xd3000000
-
-#define FLASH2_START		0x10000000      /* FLASH BANK 2 */
-#define FLASH2_SIZE 		0x01000000
-#define FLASH2_BASE		0xd4000000
-
-#define ISA_START		0x20000000	/* ISA */
-#define ISA_SIZE		0x20000000
-#define ISA_BASE		0xe0000000
-
-#define PCIO_BASE		IO_BASE
-
-#endif
diff --git a/include/asm-arm/arch-l7200/io.h b/include/asm-arm/arch-l7200/io.h
deleted file mode 100644
index 645dbdfb3908..000000000000
--- a/include/asm-arm/arch-l7200/io.h
+++ /dev/null
@@ -1,27 +0,0 @@
-/*
- * linux/include/asm-arm/arch-l7200/io.h
- *
- * Copyright (C) 2000 Steve Hill (sjhill@cotw.com)
- *
- * Changelog:
- *  03-21-2000	SJH	Created from linux/include/asm-arm/arch-nexuspci/io.h
- *  08-31-2000	SJH	Added in IO functions necessary for new drivers
- */
-#ifndef __ASM_ARM_ARCH_IO_H
-#define __ASM_ARM_ARCH_IO_H
-
-#include <asm/hardware.h>
-
-#define IO_SPACE_LIMIT 0xffffffff
-
-/*
- * There are not real ISA nor PCI buses, so we fake it.
- */
-static inline void __iomem *__io(unsigned long addr)
-{
-	return (void __iomem *)addr;
-}
-#define __io(a)	__io(a)
-#define __mem_pci(a)		(a)
-
-#endif
diff --git a/include/asm-arm/arch-l7200/irqs.h b/include/asm-arm/arch-l7200/irqs.h
deleted file mode 100644
index 7120c016e29e..000000000000
--- a/include/asm-arm/arch-l7200/irqs.h
+++ /dev/null
@@ -1,56 +0,0 @@
-/*
- * include/asm-arm/arch-l7200/irqs.h
- *
- * Copyright (C) 2000 Rob Scott (rscott@mtrob.fdns.net)
- *                    Steve Hill (sjhill@cotw.com)
- *
- * Changelog:
- *   01-02-2000 RS	Create l7200 version
- *   03-28-2000 SJH	Removed unused interrupt
- *   07-28-2000 SJH	Added pseudo-keyboard interrupt
- */
-
-/*
- * NOTE: The second timer (Timer 2) is used as the keyboard
- *       interrupt when the keyboard driver is enabled.
- */
-
-#define NR_IRQS          32
-
-#define IRQ_STWDOG        0   /* Watchdog timer */
-#define IRQ_PROG          1   /* Programmable interrupt */
-#define IRQ_DEBUG_RX      2   /* Comm Rx debug */
-#define IRQ_DEBUG_TX      3   /* Comm Tx debug */
-#define IRQ_GCTC1         4   /* Timer 1 */
-#define IRQ_GCTC2         5   /* Timer 2 / Keyboard */
-#define IRQ_DMA           6   /* DMA controller */
-#define IRQ_CLCD          7   /* Color LCD controller */
-#define IRQ_SM_RX         8   /* Smart card */
-#define IRQ_SM_TX         9   /* Smart cart */
-#define IRQ_SM_RST       10   /* Smart card */
-#define IRQ_SIB          11   /* Serial Interface Bus */
-#define IRQ_MMC          12   /* MultiMediaCard */
-#define IRQ_SSP1         13   /* Synchronous Serial Port 1 */
-#define IRQ_SSP2         14   /* Synchronous Serial Port 1 */
-#define IRQ_SPI          15   /* SPI slave */
-#define IRQ_UART_1       16   /* UART 1 */
-#define IRQ_UART_2       17   /* UART 2 */
-#define IRQ_IRDA         18   /* IRDA */
-#define IRQ_RTC_TICK     19   /* Real Time Clock tick */
-#define IRQ_RTC_ALARM    20   /* Real Time Clock alarm */
-#define IRQ_GPIO         21   /* General Purpose IO */
-#define IRQ_GPIO_DMA     22   /* General Purpose IO, DMA */
-#define IRQ_M2M          23   /* Memory to memory DMA  */
-#define IRQ_RESERVED     24   /* RESERVED, don't use */
-#define IRQ_INTF         25   /* External active low interrupt */
-#define IRQ_INT0         26   /* External active low interrupt */
-#define IRQ_INT1         27   /* External active low interrupt */
-#define IRQ_INT2         28   /* External active low interrupt */
-#define IRQ_UCB1200      29   /* Interrupt generated by UCB1200*/
-#define IRQ_BAT_LO       30   /* Low batery or external power */
-#define IRQ_MEDIA_CHG    31   /* Media change interrupt */
-
-/*
- * This is the offset of the FIQ "IRQ" numbers
- */
-#define FIQ_START	64
diff --git a/include/asm-arm/arch-l7200/memory.h b/include/asm-arm/arch-l7200/memory.h
deleted file mode 100644
index 402df637e740..000000000000
--- a/include/asm-arm/arch-l7200/memory.h
+++ /dev/null
@@ -1,29 +0,0 @@
-/*
- * linux/include/asm-arm/arch-l7200/memory.h
- *
- * Copyright (c) 2000 Steve Hill (sjhill@cotw.com)
- * Copyright (c) 2000 Rob Scott (rscott@mtrob.fdns.net)
- *
- * Changelog:
- *  03-13-2000	SJH	Created
- *  04-13-2000  RS      Changed bus macros for new addr
- *  05-03-2000  SJH     Removed bus macros and fixed virt_to_phys macro
- */
-#ifndef __ASM_ARCH_MEMORY_H
-#define __ASM_ARCH_MEMORY_H
-
-/*
- * Physical DRAM offset on the L7200 SDB.
- */
-#define PHYS_OFFSET     UL(0xf0000000)
-
-#define __virt_to_bus(x) __virt_to_phys(x)
-#define __bus_to_virt(x) __phys_to_virt(x)
-
-/*
- * Cache flushing area - ROM
- */
-#define FLUSH_BASE_PHYS		0x40000000
-#define FLUSH_BASE		0xdf000000
-
-#endif
diff --git a/include/asm-arm/arch-l7200/serial.h b/include/asm-arm/arch-l7200/serial.h
deleted file mode 100644
index defb8b7fca73..000000000000
--- a/include/asm-arm/arch-l7200/serial.h
+++ /dev/null
@@ -1,37 +0,0 @@
-/*
- * linux/include/asm-arm/arch-l7200/serial.h
- *
- * Copyright (c) 2000 Rob Scott (rscott@mtrob.fdns.net)
- *                    Steve Hill (sjhill@cotw.com)
- *
- * Changelog:
- *  03-20-2000  SJH     Created
- *  03-26-2000  SJH     Added flags for serial ports
- *  03-27-2000  SJH     Corrected BASE_BAUD value
- *  04-14-2000  RS      Made register addr dependent on IO_BASE
- *  05-03-2000  SJH     Complete rewrite
- *  05-09-2000	SJH	Stripped out architecture specific serial stuff
- *                      and placed it in a separate file
- *  07-28-2000	SJH	Moved base baud rate variable
- */
-#ifndef __ASM_ARCH_SERIAL_H
-#define __ASM_ARCH_SERIAL_H
-
-/*
- * This assumes you have a 3.6864 MHz clock for your UART.
- */
-#define BASE_BAUD	3686400
-
-/*
- * Standard COM flags
- */
-#define STD_COM_FLAGS (ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST)
-
-#define STD_SERIAL_PORT_DEFNS		\
-	/* MAGIC UART CLK   PORT       IRQ     FLAGS */			\
-	{ 0, BASE_BAUD, UART1_BASE, IRQ_UART_1, STD_COM_FLAGS },  /* ttyLU0 */ \
-	{ 0, BASE_BAUD, UART2_BASE, IRQ_UART_2, STD_COM_FLAGS },  /* ttyLU1 */ \
-
-#define EXTRA_SERIAL_PORT_DEFNS
-
-#endif
diff --git a/include/asm-arm/arch-l7200/system.h b/include/asm-arm/arch-l7200/system.h
deleted file mode 100644
index 18825cf071ba..000000000000
--- a/include/asm-arm/arch-l7200/system.h
+++ /dev/null
@@ -1,29 +0,0 @@
-/*
- * linux/include/asm-arm/arch-l7200/system.h
- *
- * Copyright (c) 2000 Steve Hill (sjhill@cotw.com)
- *
- * Changelog
- *  03-21-2000  SJH	Created
- *  04-26-2000  SJH	Fixed functions
- *  05-03-2000  SJH	Removed usage of obsolete 'iomd.h'
- *  05-31-2000  SJH	Properly implemented 'arch_idle'
- */
-#ifndef __ASM_ARCH_SYSTEM_H
-#define __ASM_ARCH_SYSTEM_H
-
-#include <asm/hardware.h>
-
-static inline void arch_idle(void)
-{
-	*(unsigned long *)(IO_BASE + 0x50004) = 1;	/* idle mode */
-}
-
-static inline void arch_reset(char mode)
-{
-	if (mode == 's') {
-		cpu_reset(0);
-	}
-}
-
-#endif
diff --git a/include/asm-arm/arch-l7200/time.h b/include/asm-arm/arch-l7200/time.h
deleted file mode 100644
index ea22f7fff9cd..000000000000
--- a/include/asm-arm/arch-l7200/time.h
+++ /dev/null
@@ -1,73 +0,0 @@
-/*
- * linux/include/asm-arm/arch-l7200/time.h
- *
- * Copyright (C) 2000 Rob Scott (rscott@mtrob.fdns.net)
- *                    Steve Hill (sjhill@cotw.com)
- *
- * Changelog:
- *   01-02-2000	RS	Created l7200 version, derived from rpc code
- *   05-03-2000	SJH	Complete rewrite
- */
-#ifndef _ASM_ARCH_TIME_H
-#define _ASM_ARCH_TIME_H
-
-#include <asm/arch/irqs.h>
-
-/*
- * RTC base register address
- */
-#define RTC_BASE	(IO_BASE_2 + 0x2000)
-
-/*
- * RTC registers
- */
-#define RTC_RTCDR	(*(volatile unsigned char *) (RTC_BASE + 0x000))
-#define RTC_RTCMR	(*(volatile unsigned char *) (RTC_BASE + 0x004))
-#define RTC_RTCS	(*(volatile unsigned char *) (RTC_BASE + 0x008))
-#define RTC_RTCC	(*(volatile unsigned char *) (RTC_BASE + 0x008))
-#define RTC_RTCDV	(*(volatile unsigned char *) (RTC_BASE + 0x00c))
-#define RTC_RTCCR	(*(volatile unsigned char *) (RTC_BASE + 0x010))
-
-/*
- * RTCCR register values
- */
-#define RTC_RATE_32	0x00      /* 32 Hz tick */
-#define RTC_RATE_64	0x10      /* 64 Hz tick */
-#define RTC_RATE_128	0x20      /* 128 Hz tick */
-#define RTC_RATE_256	0x30      /* 256 Hz tick */
-#define RTC_EN_ALARM	0x01      /* Enable alarm */
-#define RTC_EN_TIC	0x04      /* Enable counter */
-#define RTC_EN_STWDOG	0x08      /* Enable watchdog */
-
-/*
- * Handler for RTC timer interrupt
- */
-static irqreturn_t
-timer_interrupt(int irq, void *dev_id)
-{
-	struct pt_regs *regs = get_irq_regs();
-	do_timer(1);
-#ifndef CONFIG_SMP
-	update_process_times(user_mode(regs));
-#endif
-	do_profile(regs);
-	RTC_RTCC = 0;				/* Clear interrupt */
-
-	return IRQ_HANDLED;
-}
-
-/*
- * Set up RTC timer interrupt, and return the current time in seconds.
- */
-void __init time_init(void)
-{
-	RTC_RTCC = 0;				/* Clear interrupt */
-
-	timer_irq.handler = timer_interrupt;
-
-	setup_irq(IRQ_RTC_TICK, &timer_irq);
-
-	RTC_RTCCR = RTC_RATE_128 | RTC_EN_TIC;	/* Set rate and enable timer */
-}
-
-#endif
diff --git a/include/asm-arm/arch-l7200/timex.h b/include/asm-arm/arch-l7200/timex.h
deleted file mode 100644
index 3c3202620f00..000000000000
--- a/include/asm-arm/arch-l7200/timex.h
+++ /dev/null
@@ -1,20 +0,0 @@
-/*
- * linux/include/asm-arm/arch-l7200/timex.h
- *
- * Copyright (C) 2000 Rob Scott (rscott@mtrob.fdns.net)
- *                    Steve Hill (sjhill@cotw.com)
- *
- * 04-21-2000  RS Created file
- * 05-03-2000 SJH Tick rate was wrong
- *
- */
-
-/*
- * On the ARM720T, clock ticks are set to 128 Hz.
- *
- * NOTE: The actual RTC value is set in 'time.h' which
- *       must be changed when choosing a different tick
- *       rate. The value of HZ in 'param.h' must also
- *       be changed to match below.
- */
-#define CLOCK_TICK_RATE		128
diff --git a/include/asm-arm/arch-l7200/uncompress.h b/include/asm-arm/arch-l7200/uncompress.h
deleted file mode 100644
index 04be2a088639..000000000000
--- a/include/asm-arm/arch-l7200/uncompress.h
+++ /dev/null
@@ -1,39 +0,0 @@
-/*
- * linux/include/asm-arm/arch-l7200/uncompress.h
- *
- * Copyright (C) 2000 Steve Hill (sjhill@cotw.com)
- *
- * Changelog:
- *  05-01-2000	SJH	Created
- *  05-13-2000	SJH	Filled in function bodies
- *  07-26-2000	SJH	Removed hard coded baud rate
- */
-
-#include <asm/hardware.h>
-
-#define IO_UART  IO_START + 0x00044000
-
-#define __raw_writeb(v,p)	(*(volatile unsigned char *)(p) = (v))
-#define __raw_readb(p)		(*(volatile unsigned char *)(p))
-
-static inline void putc(int c)
-{
-	while(__raw_readb(IO_UART + 0x18) & 0x20 ||
-	      __raw_readb(IO_UART + 0x18) & 0x08)
-		barrier();
-
-	__raw_writeb(c, IO_UART + 0x00);
-}
-
-static inline void flush(void)
-{
-}
-
-static __inline__ void arch_decomp_setup(void)
-{
-	__raw_writeb(0x00, IO_UART + 0x08);	/* Set HSB */
-	__raw_writeb(0x00, IO_UART + 0x20);	/* Disable IRQs */
-	__raw_writeb(0x01, IO_UART + 0x14);	/* Enable UART */
-}
-
-#define arch_decomp_wdog()
diff --git a/include/asm-arm/arch-l7200/vmalloc.h b/include/asm-arm/arch-l7200/vmalloc.h
deleted file mode 100644
index 816231eedaac..000000000000
--- a/include/asm-arm/arch-l7200/vmalloc.h
+++ /dev/null
@@ -1,4 +0,0 @@
-/*
- * linux/include/asm-arm/arch-l7200/vmalloc.h
- */
-#define VMALLOC_END       (PAGE_OFFSET + 0x10000000)
diff --git a/include/asm-arm/arch-lh7a40x/debug-macro.S b/include/asm-arm/arch-lh7a40x/debug-macro.S
deleted file mode 100644
index 421dcd6a8506..000000000000
--- a/include/asm-arm/arch-lh7a40x/debug-macro.S
+++ /dev/null
@@ -1,39 +0,0 @@
-/* linux/include/asm-arm/arch-lh7a40x/debug-macro.S
- *
- * Debugging macro include header
- *
- *  Copyright (C) 1994-1999 Russell King
- *  Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
-*/
-
-	@ It is not known if this will be appropriate for every 40x
-	@ board.
-
-		.macro  addruart,rx
-		mrc     p15, 0, \rx, c1, c0
-		tst     \rx, #1                 @ MMU enabled?
-		mov     \rx, #0x00000700        @ offset from base
-		orreq   \rx, \rx, #0x80000000   @ physical base
-		orrne   \rx, \rx, #0xf8000000   @ virtual base
-		.endm
-
-		.macro  senduart,rd,rx
-		strb    \rd, [\rx]              @ DATA
-		.endm
-
-		.macro  busyuart,rd,rx          @ spin while busy
-1001:		ldr     \rd, [\rx, #0x10]       @ STATUS
-		tst     \rd, #1 << 3            @ BUSY (TX FIFO not empty)
-		bne     1001b                   @ yes, spin
-		.endm
-
-		.macro  waituart,rd,rx          @ wait for Tx FIFO room
-1001:		ldrb    \rd, [\rx, #0x10]       @ STATUS
-		tst     \rd, #1 << 5            @ TXFF (TX FIFO full)
-		bne     1001b                   @ yes, spin
-		.endm
diff --git a/include/asm-arm/arch-lh7a40x/dma.h b/include/asm-arm/arch-lh7a40x/dma.h
deleted file mode 100644
index a8cbd14bbf9d..000000000000
--- a/include/asm-arm/arch-lh7a40x/dma.h
+++ /dev/null
@@ -1,86 +0,0 @@
-/* include/asm-arm/arch-lh7a40x/dma.h
- *
- *  Copyright (C) 2005 Marc Singer
- *
- *  This program is free software; you can redistribute it and/or
- *  modify it under the terms of the GNU General Public License
- *  version 2 as published by the Free Software Foundation.
- *
- */
-
-typedef enum {
-	DMA_M2M0	= 0,
-	DMA_M2M1	= 1,
-	DMA_M2P0	= 2,	/* Tx */
-	DMA_M2P1	= 3,	/* Rx */
-	DMA_M2P2	= 4,	/* Tx */
-	DMA_M2P3	= 5,	/* Rx */
-	DMA_M2P4	= 6,	/* Tx - AC97 */
-	DMA_M2P5	= 7,	/* Rx - AC97 */
-	DMA_M2P6	= 8,	/* Tx */
-	DMA_M2P7	= 9,	/* Rx */
-} dma_device_t;
-
-#define DMA_LENGTH_MAX		((64*1024) - 4) /* bytes */
-
-#define DMAC_GCA		__REG(DMAC_PHYS + 0x2b80)
-#define DMAC_GIR		__REG(DMAC_PHYS + 0x2bc0)
-
-#define DMAC_GIR_MMI1		(1<<11)
-#define DMAC_GIR_MMI0		(1<<10)
-#define DMAC_GIR_MPI8		(1<<9)
-#define DMAC_GIR_MPI9		(1<<8)
-#define DMAC_GIR_MPI6		(1<<7)
-#define DMAC_GIR_MPI7		(1<<6)
-#define DMAC_GIR_MPI4		(1<<5)
-#define DMAC_GIR_MPI5		(1<<4)
-#define DMAC_GIR_MPI2		(1<<3)
-#define DMAC_GIR_MPI3		(1<<2)
-#define DMAC_GIR_MPI0		(1<<1)
-#define DMAC_GIR_MPI1		(1<<0)
-
-#define DMAC_M2P0		0x0000
-#define DMAC_M2P1		0x0040
-#define DMAC_M2P2		0x0080
-#define DMAC_M2P3		0x00c0
-#define DMAC_M2P4		0x0240
-#define DMAC_M2P5		0x0200
-#define DMAC_M2P6		0x02c0
-#define DMAC_M2P7		0x0280
-#define DMAC_M2P8		0x0340
-#define DMAC_M2P9		0x0300
-#define DMAC_M2M0		0x0100
-#define DMAC_M2M1		0x0140
-
-#define DMAC_P_PCONTROL(c)	__REG(DMAC_PHYS + (c) + 0x00)
-#define DMAC_P_PINTERRUPT(c)	__REG(DMAC_PHYS + (c) + 0x04)
-#define DMAC_P_PPALLOC(c)	__REG(DMAC_PHYS + (c) + 0x08)
-#define DMAC_P_PSTATUS(c)	__REG(DMAC_PHYS + (c) + 0x0c)
-#define DMAC_P_REMAIN(c)	__REG(DMAC_PHYS + (c) + 0x14)
-#define DMAC_P_MAXCNT0(c)	__REG(DMAC_PHYS + (c) + 0x20)
-#define DMAC_P_BASE0(c)		__REG(DMAC_PHYS + (c) + 0x24)
-#define DMAC_P_CURRENT0(c)	__REG(DMAC_PHYS + (c) + 0x28)
-#define DMAC_P_MAXCNT1(c)	__REG(DMAC_PHYS + (c) + 0x30)
-#define DMAC_P_BASE1(c)		__REG(DMAC_PHYS + (c) + 0x34)
-#define DMAC_P_CURRENT1(c)	__REG(DMAC_PHYS + (c) + 0x38)
-
-#define DMAC_PCONTROL_ENABLE	(1<<4)
-
-#define DMAC_PORT_USB		0
-#define DMAC_PORT_SDMMC		1
-#define DMAC_PORT_AC97_1	2
-#define DMAC_PORT_AC97_2	3
-#define DMAC_PORT_AC97_3	4
-#define DMAC_PORT_UART1		6
-#define DMAC_PORT_UART2		7
-#define DMAC_PORT_UART3		8
-
-#define DMAC_PSTATUS_CURRSTATE_SHIFT	4
-#define DMAC_PSTATUS_CURRSTATE_MASK	0x3
-
-#define DMAC_PSTATUS_NEXTBUF	 (1<<6)
-#define DMAC_PSTATUS_STALLRINT	 (1<<0)
-
-#define DMAC_INT_CHE		 (1<<3)
-#define DMAC_INT_NFB		 (1<<1)
-#define DMAC_INT_STALL		 (1<<0)
diff --git a/include/asm-arm/arch-lh7a40x/entry-macro.S b/include/asm-arm/arch-lh7a40x/entry-macro.S
deleted file mode 100644
index ffe397250f0c..000000000000
--- a/include/asm-arm/arch-lh7a40x/entry-macro.S
+++ /dev/null
@@ -1,149 +0,0 @@
-/*
- * include/asm-arm/arch-lh7a40x/entry-macro.S
- *
- * Low-level IRQ helper macros for LH7A40x platforms
- *
- * This file is licensed under  the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-#include <asm/hardware.h>
-#include <asm/arch/irqs.h>
-
-/* In order to allow there to be support for both of the processor
-   classes at the same time, we make a hack here that isn't very
-   pretty.  At startup, the link pointed to with the
-   branch_irq_lh7a400 symbol is replaced with a NOP when the CPU is
-   detected as a lh7a404.
-
-   *** FIXME: we should clean this up so that there is only one
-	      implementation for each CPU's design.
-
-*/
-
-#if defined (CONFIG_ARCH_LH7A400) && defined (CONFIG_ARCH_LH7A404)
-
-		.macro	disable_fiq
-		.endm
-
-		.macro  get_irqnr_preamble, base, tmp
-		.endm
-
-		.macro  arch_ret_to_user, tmp1, tmp2
-		.endm
-
-		.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
-
-branch_irq_lh7a400: b 1000f
-
-@ Implementation of the LH7A404 get_irqnr_and_base.
-
-		mov	\irqnr, #0			@ VIC1 irq base
-		mov	\base, #io_p2v(0x80000000)	@ APB registers
-		add	\base, \base, #0x8000
-		ldr	\tmp, [\base, #0x0030]		@ VIC1_VECTADDR
-		tst	\tmp, #VA_VECTORED		@ Direct vectored
-		bne	1002f
-		tst	\tmp, #VA_VIC1DEFAULT		@ Default vectored VIC1
-		ldrne	\irqstat, [\base, #0]		@ VIC1_IRQSTATUS
-		bne	1001f
-		add	\base, \base, #(0xa000 - 0x8000)
-		ldr	\tmp, [\base, #0x0030]		@ VIC2_VECTADDR
-		tst	\tmp, #VA_VECTORED		@ Direct vectored
-		bne	1002f
-		ldr	\irqstat, [\base, #0]		@ VIC2_IRQSTATUS
-		mov	\irqnr, #32			@ VIC2 irq base
-
-1001:		movs	\irqstat, \irqstat, lsr #1	@ Shift into carry
-		bcs	1008f				@ Bit set; irq found
-		add	\irqnr, \irqnr, #1
-		bne	1001b				@ Until no bits
-		b	1009f				@ Nothing?  Hmm.
-1002:		and	\irqnr, \tmp, #0x3f		@ Mask for valid bits
-1008:		movs	\irqstat, #1			@ Force !Z
-		str	\tmp, [\base, #0x0030]		@ Clear vector
-		b	1009f
-
-@ Implementation of the LH7A400 get_irqnr_and_base.
-
-1000:		mov	\irqnr, #0
-		mov	\base, #io_p2v(0x80000000)	@ APB registers
-		ldr	\irqstat, [\base, #0x500]	@ PIC INTSR
-
-1001:		movs	\irqstat, \irqstat, lsr #1	@ Shift into carry
-		bcs	1008f				@ Bit set; irq found
-		add	\irqnr, \irqnr, #1
-		bne	1001b				@ Until no bits
-		b	1009f				@ Nothing?  Hmm.
-1008:		movs	\irqstat, #1			@ Force !Z
-
-1009:
-               .endm
-
-
-
-#elif defined (CONFIG_ARCH_LH7A400)
-		.macro	disable_fiq
-		.endm
-
-		.macro  get_irqnr_preamble, base, tmp
-		.endm
-
-		.macro  arch_ret_to_user, tmp1, tmp2
-		.endm
-
-		.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
-		mov	\irqnr, #0
-		mov	\base, #io_p2v(0x80000000)	@ APB registers
-		ldr	\irqstat, [\base, #0x500]	@ PIC INTSR
-
-1001:		movs	\irqstat, \irqstat, lsr #1	@ Shift into carry
-		bcs	1008f				@ Bit set; irq found
-		add	\irqnr, \irqnr, #1
-		bne	1001b				@ Until no bits
-		b	1009f				@ Nothing?  Hmm.
-1008:		movs	\irqstat, #1			@ Force !Z
-1009:
-               .endm
-
-#elif defined(CONFIG_ARCH_LH7A404)
-
-		.macro	disable_fiq
-		.endm
-
-		.macro  get_irqnr_preamble, base, tmp
-		.endm
-
-		.macro  arch_ret_to_user, tmp1, tmp2
-		.endm
-
-		.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
-		mov	\irqnr, #0			@ VIC1 irq base
-		mov	\base, #io_p2v(0x80000000)	@ APB registers
-		add	\base, \base, #0x8000
-		ldr	\tmp, [\base, #0x0030]		@ VIC1_VECTADDR
-		tst	\tmp, #VA_VECTORED		@ Direct vectored
-		bne	1002f
-		tst	\tmp, #VA_VIC1DEFAULT		@ Default vectored VIC1
-		ldrne	\irqstat, [\base, #0]		@ VIC1_IRQSTATUS
-		bne	1001f
-		add	\base, \base, #(0xa000 - 0x8000)
-		ldr	\tmp, [\base, #0x0030]		@ VIC2_VECTADDR
-		tst	\tmp, #VA_VECTORED		@ Direct vectored
-		bne	1002f
-		ldr	\irqstat, [\base, #0]		@ VIC2_IRQSTATUS
-		mov	\irqnr, #32			@ VIC2 irq base
-
-1001:		movs	\irqstat, \irqstat, lsr #1	@ Shift into carry
-		bcs	1008f				@ Bit set; irq found
-		add	\irqnr, \irqnr, #1
-		bne	1001b				@ Until no bits
-		b	1009f				@ Nothing?  Hmm.
-1002:		and	\irqnr, \tmp, #0x3f		@ Mask for valid bits
-1008:		movs	\irqstat, #1			@ Force !Z
-		str	\tmp, [\base, #0x0030]		@ Clear vector
-1009:
-               .endm
-#endif
-
-
diff --git a/include/asm-arm/arch-lh7a40x/hardware.h b/include/asm-arm/arch-lh7a40x/hardware.h
deleted file mode 100644
index e9ff74fd7939..000000000000
--- a/include/asm-arm/arch-lh7a40x/hardware.h
+++ /dev/null
@@ -1,62 +0,0 @@
-/* include/asm-arm/arch-lh7a40x/hardware.h
- *
- *  Copyright (C) 2004 Coastal Environmental Systems
- *
- *  [ Substantially cribbed from include/asm-arm/arch-pxa/hardware.h ]
- *
- *  This program is free software; you can redistribute it and/or
- *  modify it under the terms of the GNU General Public License
- *  version 2 as published by the Free Software Foundation.
- *
- */
-
-#ifndef __ASM_ARCH_HARDWARE_H
-#define __ASM_ARCH_HARDWARE_H
-
-#include <asm/sizes.h>		/* Added for the sake of amba-clcd driver */
-
-#define io_p2v(x) (0xf0000000 | (((x) & 0xfff00000) >> 4) | ((x) & 0x0000ffff))
-#define io_v2p(x) (             (((x) & 0x0fff0000) << 4) | ((x) & 0x0000ffff))
-
-#ifdef __ASSEMBLY__
-
-# define __REG(x)	io_p2v(x)
-# define __PREG(x)	io_v2p(x)
-
-#else
-
-# if 0
-#  define __REG(x)	(*((volatile u32 *)io_p2v(x)))
-# else
-/*
- * This __REG() version gives the same results as the one above,  except
- * that we are fooling gcc somehow so it generates far better and smaller
- * assembly code for access to contigous registers.  It's a shame that gcc
- * doesn't guess this by itself.
- */
-#include <asm/types.h>
-typedef struct { volatile u32 offset[4096]; } __regbase;
-# define __REGP(x)	((__regbase *)((x)&~4095))->offset[((x)&4095)>>2]
-# define __REG(x)	__REGP(io_p2v(x))
-typedef struct { volatile u16 offset[4096]; } __regbase16;
-# define __REGP16(x)	((__regbase16 *)((x)&~4095))->offset[((x)&4095)>>1]
-# define __REG16(x)	__REGP16(io_p2v(x))
-typedef struct { volatile u8 offset[4096]; } __regbase8;
-# define __REGP8(x)	((__regbase8 *)((x)&~4095))->offset[(x)&4095]
-# define __REG8(x)	__REGP8(io_p2v(x))
-#endif
-
-/* Let's kick gcc's ass again... */
-# define __REG2(x,y)	\
-	( __builtin_constant_p(y) ? (__REG((x) + (y))) \
-				  : (*(volatile u32 *)((u32)&__REG(x) + (y))) )
-
-# define __PREG(x)	(io_v2p((u32)&(x)))
-
-#endif
-
-#define MASK_AND_SET(v,m,s)	(v) = ((v)&~(m))|(s)
-
-#include "registers.h"
-
-#endif  /* _ASM_ARCH_HARDWARE_H */
diff --git a/include/asm-arm/arch-lh7a40x/io.h b/include/asm-arm/arch-lh7a40x/io.h
deleted file mode 100644
index 17bc94097481..000000000000
--- a/include/asm-arm/arch-lh7a40x/io.h
+++ /dev/null
@@ -1,22 +0,0 @@
-/* include/asm-arm/arch-lh7a40x/io.h
- *
- *  Copyright (C) 2004 Coastal Environmental Systems
- *
- *  This program is free software; you can redistribute it and/or
- *  modify it under the terms of the GNU General Public License
- *  version 2 as published by the Free Software Foundation.
- *
- */
-
-#ifndef __ASM_ARCH_IO_H
-#define __ASM_ARCH_IO_H
-
-#include <asm/hardware.h>
-
-#define IO_SPACE_LIMIT 0xffffffff
-
-/* No ISA or PCI bus on this machine. */
-#define __io(a)			((void __iomem *)(a))
-#define __mem_pci(a)		(a)
-
-#endif /* __ASM_ARCH_IO_H */
diff --git a/include/asm-arm/arch-lh7a40x/irqs.h b/include/asm-arm/arch-lh7a40x/irqs.h
deleted file mode 100644
index afe8c7cbad6a..000000000000
--- a/include/asm-arm/arch-lh7a40x/irqs.h
+++ /dev/null
@@ -1,200 +0,0 @@
-/* include/asm-arm/arch-lh7a40x/irqs.h
- *
- *  Copyright (C) 2004 Coastal Environmental Systems
- *  Copyright (C) 2004 Logic Product Development
- *
- *  This program is free software; you can redistribute it and/or
- *  modify it under the terms of the GNU General Public License
- *  version 2 as published by the Free Software Foundation.
- *
- */
-
-/* It is to be seen whether or not we can build a kernel for more than
- * one board.  For the time being, these macros assume that we cannot.
- * Thus, it is OK to ifdef machine/board specific IRQ assignments.
- */
-
-
-#ifndef __ASM_ARCH_IRQS_H
-#define __ASM_ARCH_IRQS_H
-
-
-#define FIQ_START	80
-
-#if defined (CONFIG_ARCH_LH7A400)
-
-  /* FIQs */
-
-# define IRQ_GPIO0FIQ	0	/* GPIO External FIQ Interrupt on F0 */
-# define IRQ_BLINT	1	/* Battery Low */
-# define IRQ_WEINT	2	/* Watchdog Timer, WDT overflow	*/
-# define IRQ_MCINT	3	/* Media Change, MEDCHG pin rising */
-
-  /* IRQs */
-
-# define IRQ_CSINT	4	/* Audio Codec (ACI) */
-# define IRQ_GPIO1INTR	5	/* GPIO External IRQ Interrupt on F1 */
-# define IRQ_GPIO2INTR	6	/* GPIO External IRQ Interrupt on F2 */
-# define IRQ_GPIO3INTR	7	/* GPIO External IRQ Interrupt on F3 */
-# define IRQ_T1UI	8	/* Timer 1 underflow */
-# define IRQ_T2UI	9	/* Timer 2 underflow */
-# define IRQ_RTCMI	10
-# define IRQ_TINTR	11	/* Clock State Controller 64 Hz tick (CSC) */
-# define IRQ_UART1INTR	12
-# define IRQ_UART2INTR	13
-# define IRQ_LCDINTR	14
-# define IRQ_SSIEOT	15	/* Synchronous Serial Interface (SSI) */
-# define IRQ_UART3INTR	16
-# define IRQ_SCIINTR	17	/* Smart Card Interface (SCI) */
-# define IRQ_AACINTR	18	/* Advanced Audio Codec (AAC) */
-# define IRQ_MMCINTR	19	/* Multimedia Card (MMC) */
-# define IRQ_USBINTR	20
-# define IRQ_DMAINTR	21
-# define IRQ_T3UI	22	/* Timer 3 underflow */
-# define IRQ_GPIO4INTR	23	/* GPIO External IRQ Interrupt on F4 */
-# define IRQ_GPIO5INTR	24	/* GPIO External IRQ Interrupt on F5 */
-# define IRQ_GPIO6INTR	25	/* GPIO External IRQ Interrupt on F6 */
-# define IRQ_GPIO7INTR	26	/* GPIO External IRQ Interrupt on F7 */
-# define IRQ_BMIINTR	27	/* Battery Monitor Interface (BMI) */
-
-# define NR_IRQ_CPU	28	/* IRQs directly recognized by CPU */
-
-	/* Given IRQ, return GPIO interrupt number 0-7 */
-# define IRQ_TO_GPIO(i)  ((i) \
-	- (((i) > IRQ_GPIO3INTR) ? IRQ_GPIO4INTR - IRQ_GPIO3INTR - 1 : 0)\
-	- (((i) > IRQ_GPIO0INTR) ? IRQ_GPIO1INTR - IRQ_GPIO0INTR - 1 : 0))
-
-#endif
-
-#if defined (CONFIG_ARCH_LH7A404)
-
-# define IRQ_BROWN	0	/* Brownout */
-# define IRQ_WDTINTR	1	/* Watchdog Timer */
-# define IRQ_COMMRX	2	/* ARM Comm Rx for Debug */
-# define IRQ_COMMTX	3	/* ARM Comm Tx for Debug */
-# define IRQ_T1UI	4	/* Timer 1 underflow */
-# define IRQ_T2UI	5	/* Timer 2 underflow */
-# define IRQ_CSINT	6	/* Codec Interrupt (shared by AAC on 404) */
-# define IRQ_DMAM2P0	7	/* -- DMA Memory to Peripheral */
-# define IRQ_DMAM2P1	8
-# define IRQ_DMAM2P2	9
-# define IRQ_DMAM2P3	10
-# define IRQ_DMAM2P4	11
-# define IRQ_DMAM2P5	12
-# define IRQ_DMAM2P6	13
-# define IRQ_DMAM2P7	14
-# define IRQ_DMAM2P8	15
-# define IRQ_DMAM2P9	16
-# define IRQ_DMAM2M0	17	/* -- DMA Memory to Memory */
-# define IRQ_DMAM2M1	18
-# define IRQ_GPIO0INTR	19	/* -- GPIOF Interrupt */
-# define IRQ_GPIO1INTR	20
-# define IRQ_GPIO2INTR	21
-# define IRQ_GPIO3INTR	22
-# define IRQ_SOFT_V1_23	23	/* -- Unassigned */
-# define IRQ_SOFT_V1_24	24
-# define IRQ_SOFT_V1_25	25
-# define IRQ_SOFT_V1_26	26
-# define IRQ_SOFT_V1_27	27
-# define IRQ_SOFT_V1_28	28
-# define IRQ_SOFT_V1_29	29
-# define IRQ_SOFT_V1_30	30
-# define IRQ_SOFT_V1_31	31
-
-# define IRQ_BLINT	32	/* Battery Low */
-# define IRQ_BMIINTR	33	/* Battery Monitor */
-# define IRQ_MCINTR	34	/* Media Change */
-# define IRQ_TINTR	35	/* 64Hz Tick */
-# define IRQ_WEINT	36	/* Watchdog Expired */
-# define IRQ_RTCMI	37	/* Real-time Clock Match */
-# define IRQ_UART1INTR	38	/* UART1 Interrupt (including error) */
-# define IRQ_UART1ERR	39	/* UART1 Error */
-# define IRQ_UART2INTR	40	/* UART2 Interrupt (including error) */
-# define IRQ_UART2ERR	41	/* UART2 Error */
-# define IRQ_UART3INTR	42	/* UART3 Interrupt (including error) */
-# define IRQ_UART3ERR	43	/* UART3 Error */
-# define IRQ_SCIINTR	44	/* Smart Card */
-# define IRQ_TSCINTR	45	/* Touchscreen */
-# define IRQ_KMIINTR	46	/* Keyboard/Mouse (PS/2) */
-# define IRQ_GPIO4INTR	47	/* -- GPIOF Interrupt */
-# define IRQ_GPIO5INTR	48
-# define IRQ_GPIO6INTR	49
-# define IRQ_GPIO7INTR	50
-# define IRQ_T3UI	51	/* Timer 3 underflow */
-# define IRQ_LCDINTR	52	/* LCD Controller */
-# define IRQ_SSPINTR	53	/* Synchronous Serial Port */
-# define IRQ_SDINTR	54	/* Secure Digital Port (MMC) */
-# define IRQ_USBINTR	55	/* USB Device Port */
-# define IRQ_USHINTR	56	/* USB Host Port */
-# define IRQ_SOFT_V2_25	57	/* -- Unassigned */
-# define IRQ_SOFT_V2_26	58
-# define IRQ_SOFT_V2_27	59
-# define IRQ_SOFT_V2_28	60
-# define IRQ_SOFT_V2_29	61
-# define IRQ_SOFT_V2_30	62
-# define IRQ_SOFT_V2_31	63
-
-# define NR_IRQ_CPU	64	/* IRQs directly recognized by CPU */
-
-	/* Given IRQ, return GPIO interrupt number 0-7 */
-# define IRQ_TO_GPIO(i)  ((i) \
-	- (((i) > IRQ_GPIO3INTR) ? IRQ_GPIO4INTR - IRQ_GPIO3INTR - 1 : 0)\
-	- IRQ_GPIO0INTR)
-
-			/* Vector Address constants */
-# define VA_VECTORED	0x100	/* Set for vectored interrupt */
-# define VA_VIC1DEFAULT	0x200	/* Set as default VECTADDR for VIC1 */
-# define VA_VIC2DEFAULT	0x400	/* Set as default VECTADDR for VIC2 */
-
-#endif
-
-  /* IRQ aliases */
-
-#if !defined (IRQ_GPIO0INTR)
-# define IRQ_GPIO0INTR	IRQ_GPIO0FIQ
-#endif
-#define IRQ_TICK	IRQ_TINTR
-#define IRQ_PCC1_RDY	IRQ_GPIO6INTR	/* PCCard 1 ready */
-#define IRQ_PCC2_RDY	IRQ_GPIO7INTR	/* PCCard 2 ready */
-#define IRQ_USB		IRQ_USBINTR	/* USB device */
-
-#ifdef CONFIG_MACH_KEV7A400
-# define IRQ_TS		IRQ_GPIOFIQ	/* Touchscreen */
-# define IRQ_CPLD	IRQ_GPIO1INTR	/* CPLD cascade */
-# define IRQ_PCC1_CD	IRQ_GPIO_F2	/* PCCard 1 card detect */
-# define IRQ_PCC2_CD	IRQ_GPIO_F3	/* PCCard 2 card detect */
-#endif
-
-#if defined (CONFIG_MACH_LPD7A400) || defined (CONFIG_MACH_LPD7A404)
-# define IRQ_CPLD_V28	IRQ_GPIO7INTR	/* CPLD cascade through GPIO_PF7 */
-# define IRQ_CPLD_V34	IRQ_GPIO3INTR	/* CPLD cascade through GPIO_PF3 */
-#endif
-
-  /* System specific IRQs */
-
-#define IRQ_BOARD_START NR_IRQ_CPU
-
-#ifdef CONFIG_MACH_KEV7A400
-# define IRQ_KEV7A400_CPLD	IRQ_BOARD_START
-# define NR_IRQ_BOARD		5
-# define IRQ_KEV7A400_MMC_CD	IRQ_KEV7A400_CPLD + 0	/* MMC Card Detect */
-# define IRQ_KEV7A400_RI2	IRQ_KEV7A400_CPLD + 1	/* Ring Indicator 2 */
-# define IRQ_KEV7A400_IDE_CF	IRQ_KEV7A400_CPLD + 2	/* Compact Flash (?) */
-# define IRQ_KEV7A400_ETH_INT	IRQ_KEV7A400_CPLD + 3	/* Ethernet chip */
-# define IRQ_KEV7A400_INT	IRQ_KEV7A400_CPLD + 4
-#endif
-
-#if defined (CONFIG_MACH_LPD7A400) || defined (CONFIG_MACH_LPD7A404)
-# define IRQ_LPD7A40X_CPLD	IRQ_BOARD_START
-# define NR_IRQ_BOARD		2
-# define IRQ_LPD7A40X_ETH_INT	IRQ_LPD7A40X_CPLD + 0	/* Ethernet chip */
-# define IRQ_LPD7A400_TS	IRQ_LPD7A40X_CPLD + 1	/* Touch screen */
-#endif
-
-#if defined (CONFIG_MACH_LPD7A400)
-# define IRQ_TOUCH		IRQ_LPD7A400_TS
-#endif
-
-#define NR_IRQS		(NR_IRQ_CPU + NR_IRQ_BOARD)
-
-#endif
diff --git a/include/asm-arm/arch-lh7a40x/memory.h b/include/asm-arm/arch-lh7a40x/memory.h
deleted file mode 100644
index 9b0c8012e713..000000000000
--- a/include/asm-arm/arch-lh7a40x/memory.h
+++ /dev/null
@@ -1,76 +0,0 @@
-/* include/asm-arm/arch-lh7a40x/memory.h
- *
- *  Copyright (C) 2004 Coastal Environmental Systems
- *
- *  This program is free software; you can redistribute it and/or
- *  modify it under the terms of the GNU General Public License
- *  version 2 as published by the Free Software Foundation.
- *
- *
- *  Refer to <file:Documentation/arm/Sharp-LH/SDRAM> for more information.
- *
- */
-
-#ifndef __ASM_ARCH_MEMORY_H
-#define __ASM_ARCH_MEMORY_H
-
-/*
- * Physical DRAM offset.
- */
-#define PHYS_OFFSET	UL(0xc0000000)
-
-/*
- * Virtual view <-> DMA view memory address translations
- * virt_to_bus: Used to translate the virtual address to an
- *		address suitable to be passed to set_dma_addr
- * bus_to_virt: Used to convert an address for DMA operations
- *		to an address that the kernel can use.
- */
-#define __virt_to_bus(x)	 __virt_to_phys(x)
-#define __bus_to_virt(x)	 __phys_to_virt(x)
-
-#ifdef CONFIG_DISCONTIGMEM
-
-/*
- * Given a kernel address, find the home node of the underlying memory.
- */
-
-# ifdef CONFIG_LH7A40X_ONE_BANK_PER_NODE
-#  define KVADDR_TO_NID(addr) \
-  (  ((((unsigned long) (addr) - PAGE_OFFSET) >> 24) &  1)\
-   | ((((unsigned long) (addr) - PAGE_OFFSET) >> 25) & ~1))
-# else  /* 2 banks per node */
-#  define KVADDR_TO_NID(addr) \
-      (((unsigned long) (addr) - PAGE_OFFSET) >> 26)
-# endif
-
-/*
- * Given a page frame number, convert it to a node id.
- */
-
-# ifdef CONFIG_LH7A40X_ONE_BANK_PER_NODE
-#  define PFN_TO_NID(pfn) \
-  (((((pfn) - PHYS_PFN_OFFSET) >> (24 - PAGE_SHIFT)) &  1)\
- | ((((pfn) - PHYS_PFN_OFFSET) >> (25 - PAGE_SHIFT)) & ~1))
-# else  /* 2 banks per node */
-#  define PFN_TO_NID(pfn) \
-    (((pfn) - PHYS_PFN_OFFSET) >> (26 - PAGE_SHIFT))
-#endif
-
-/*
- * Given a kaddr, LOCAL_MEM_MAP finds the owning node of the memory
- * and returns the index corresponding to the appropriate page in the
- * node's mem_map.
- */
-
-# ifdef CONFIG_LH7A40X_ONE_BANK_PER_NODE
-#  define LOCAL_MAP_NR(addr) \
-       (((unsigned long)(addr) & 0x003fffff) >> PAGE_SHIFT)
-# else  /* 2 banks per node */
-#  define LOCAL_MAP_NR(addr) \
-       (((unsigned long)(addr) & 0x01ffffff) >> PAGE_SHIFT)
-# endif
-
-#endif
-
-#endif
diff --git a/include/asm-arm/arch-lh7a40x/system.h b/include/asm-arm/arch-lh7a40x/system.h
deleted file mode 100644
index e1df8aa460f2..000000000000
--- a/include/asm-arm/arch-lh7a40x/system.h
+++ /dev/null
@@ -1,19 +0,0 @@
-/* include/asm-arm/arch-lh7a40x/system.h
- *
- *  Copyright (C) 2004 Coastal Environmental Systems
- *
- *  This program is free software; you can redistribute it and/or
- *  modify it under the terms of the GNU General Public License
- *  version 2 as published by the Free Software Foundation.
- *
- */
-
-static inline void arch_idle(void)
-{
-	cpu_do_idle ();
-}
-
-static inline void arch_reset(char mode)
-{
-	cpu_reset (0);
-}
diff --git a/include/asm-arm/arch-lh7a40x/timex.h b/include/asm-arm/arch-lh7a40x/timex.h
deleted file mode 100644
index fa726b670829..000000000000
--- a/include/asm-arm/arch-lh7a40x/timex.h
+++ /dev/null
@@ -1,17 +0,0 @@
-/* include/asm-arm/arch-lh7a40x/timex.h
- *
- *  Copyright (C) 2004 Coastal Environmental Systems
- *
- *  This program is free software; you can redistribute it and/or
- *  modify it under the terms of the GNU General Public License
- *  version 2 as published by the Free Software Foundation.
- *
- */
-
-#include <asm/arch/constants.h>
-
-#define CLOCK_TICK_RATE		(PLL_CLOCK/6/16)
-
-/*
-#define CLOCK_TICK_RATE		3686400
-*/
diff --git a/include/asm-arm/arch-lh7a40x/uncompress.h b/include/asm-arm/arch-lh7a40x/uncompress.h
deleted file mode 100644
index 3d1ce0426a33..000000000000
--- a/include/asm-arm/arch-lh7a40x/uncompress.h
+++ /dev/null
@@ -1,38 +0,0 @@
-/* include/asm-arm/arch-lh7a40x/uncompress.h
- *
- *  Copyright (C) 2004 Coastal Environmental Systems
- *
- *  This program is free software; you can redistribute it and/or
- *  modify it under the terms of the GNU General Public License
- *  version 2 as published by the Free Software Foundation.
- *
- */
-
-#include <asm/arch/registers.h>
-
-#ifndef UART_R_DATA
-# define UART_R_DATA	(0x00)
-#endif
-#ifndef UART_R_STATUS
-# define UART_R_STATUS	(0x10)
-#endif
-#define nTxRdy		(0x20)	/* Not TxReady (literally Tx FIFO full) */
-
-	/* Access UART with physical addresses before MMU is setup */
-#define UART_STATUS (*(volatile unsigned long*) (UART2_PHYS + UART_R_STATUS))
-#define UART_DATA   (*(volatile unsigned long*) (UART2_PHYS + UART_R_DATA))
-
-static inline void putc(int ch)
-{
-	while (UART_STATUS & nTxRdy)
-		barrier();
-	UART_DATA = ch;
-}
-
-static inline void flush(void)
-{
-}
-
-	/* NULL functions; we don't presently need them */
-#define arch_decomp_setup()
-#define arch_decomp_wdog()
diff --git a/include/asm-arm/arch-lh7a40x/vmalloc.h b/include/asm-arm/arch-lh7a40x/vmalloc.h
deleted file mode 100644
index 8163e45109b9..000000000000
--- a/include/asm-arm/arch-lh7a40x/vmalloc.h
+++ /dev/null
@@ -1,10 +0,0 @@
-/* include/asm-arm/arch-lh7a40x/vmalloc.h
- *
- *  Copyright (C) 2004 Coastal Environmental Systems
- *
- *  This program is free software; you can redistribute it and/or
- *  modify it under the terms of the GNU General Public License
- *  version 2 as published by the Free Software Foundation.
- *
- */
-#define VMALLOC_END       (0xe8000000)
diff --git a/include/asm-arm/arch-loki/debug-macro.S b/include/asm-arm/arch-loki/debug-macro.S
deleted file mode 100644
index 585502e96513..000000000000
--- a/include/asm-arm/arch-loki/debug-macro.S
+++ /dev/null
@@ -1,20 +0,0 @@
-/*
- * include/asm-arm/arch-loki/debug-macro.S
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <asm/arch/loki.h>
-
-	.macro	addruart,rx
-	mrc	p15, 0, \rx, c1, c0
-	tst	\rx, #1					@ MMU enabled?
-	ldreq	\rx, =LOKI_REGS_PHYS_BASE
-	ldrne	\rx, =LOKI_REGS_VIRT_BASE
-	orr	\rx, \rx, #0x00012000
-	.endm
-
-#define UART_SHIFT	2
-#include <asm/hardware/debug-8250.S>
diff --git a/include/asm-arm/arch-loki/entry-macro.S b/include/asm-arm/arch-loki/entry-macro.S
deleted file mode 100644
index 693257cdbeb8..000000000000
--- a/include/asm-arm/arch-loki/entry-macro.S
+++ /dev/null
@@ -1,30 +0,0 @@
-/*
- * include/asm-arm/arch-loki/entry-macro.S
- *
- * Low-level IRQ helper macros for Marvell Loki (88RC8480) platforms
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <asm/arch/loki.h>
-
-	.macro  disable_fiq
-	.endm
-
-	.macro  arch_ret_to_user, tmp1, tmp2
-	.endm
-
-	.macro  get_irqnr_preamble, base, tmp
-	ldr	\base, =IRQ_VIRT_BASE
-	.endm
-
-	.macro  get_irqnr_and_base, irqnr, irqstat, base, tmp
-	ldr	\irqstat, [\base, #IRQ_CAUSE_OFF]
-	ldr	\tmp, [\base, #IRQ_MASK_OFF]
-	mov	\irqnr, #0
-	ands	\irqstat, \irqstat, \tmp
-	clzne	\irqnr, \irqstat
-	rsbne	\irqnr, \irqnr, #31
-	.endm
diff --git a/include/asm-arm/arch-loki/hardware.h b/include/asm-arm/arch-loki/hardware.h
deleted file mode 100644
index f65b01c733b6..000000000000
--- a/include/asm-arm/arch-loki/hardware.h
+++ /dev/null
@@ -1,15 +0,0 @@
-/*
- * include/asm-arm/arch-loki/hardware.h
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ASM_ARCH_HARDWARE_H
-#define __ASM_ARCH_HARDWARE_H
-
-#include "loki.h"
-
-
-#endif
diff --git a/include/asm-arm/arch-loki/io.h b/include/asm-arm/arch-loki/io.h
deleted file mode 100644
index e7418a915e75..000000000000
--- a/include/asm-arm/arch-loki/io.h
+++ /dev/null
@@ -1,26 +0,0 @@
-/*
- * include/asm-arm/arch-loki/io.h
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __ASM_ARCH_IO_H
-#define __ASM_ARCH_IO_H
-
-#include "loki.h"
-
-#define IO_SPACE_LIMIT		0xffffffff
-
-static inline void __iomem *__io(unsigned long addr)
-{
-	return (void __iomem *)((addr - LOKI_PCIE0_IO_PHYS_BASE)
-					+ LOKI_PCIE0_IO_VIRT_BASE);
-}
-
-#define __io(a)			__io(a)
-#define __mem_pci(a)		(a)
-
-
-#endif
diff --git a/include/asm-arm/arch-loki/irqs.h b/include/asm-arm/arch-loki/irqs.h
deleted file mode 100644
index 7e4971438072..000000000000
--- a/include/asm-arm/arch-loki/irqs.h
+++ /dev/null
@@ -1,58 +0,0 @@
-/*
- * include/asm-arm/arch-loki/irqs.h
- *
- * IRQ definitions for Marvell Loki (88RC8480) SoCs
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __ASM_ARCH_IRQS_H
-#define __ASM_ARCH_IRQS_H
-
-#include "loki.h"	/* need GPIO_MAX */
-
-/*
- * Interrupt Controller
- */
-#define IRQ_LOKI_PCIE_A_CPU_DRBL	0
-#define IRQ_LOKI_CPU_PCIE_A_DRBL	1
-#define IRQ_LOKI_PCIE_B_CPU_DRBL	2
-#define IRQ_LOKI_CPU_PCIE_B_DRBL	3
-#define IRQ_LOKI_COM_A_ERR		6
-#define IRQ_LOKI_COM_A_IN		7
-#define IRQ_LOKI_COM_A_OUT		8
-#define IRQ_LOKI_COM_B_ERR		9
-#define IRQ_LOKI_COM_B_IN		10
-#define IRQ_LOKI_COM_B_OUT		11
-#define IRQ_LOKI_DMA_A			12
-#define IRQ_LOKI_DMA_B			13
-#define IRQ_LOKI_SAS_A			14
-#define IRQ_LOKI_SAS_B			15
-#define IRQ_LOKI_DDR			16
-#define IRQ_LOKI_XOR			17
-#define IRQ_LOKI_BRIDGE			18
-#define IRQ_LOKI_PCIE_A_ERR		20
-#define IRQ_LOKI_PCIE_A_INT		21
-#define IRQ_LOKI_PCIE_B_ERR		22
-#define IRQ_LOKI_PCIE_B_INT		23
-#define IRQ_LOKI_GBE_A_INT		24
-#define IRQ_LOKI_GBE_B_INT		25
-#define IRQ_LOKI_DEV_ERR		26
-#define IRQ_LOKI_UART0			27
-#define IRQ_LOKI_UART1			28
-#define IRQ_LOKI_TWSI			29
-#define IRQ_LOKI_GPIO_23_0		30
-#define IRQ_LOKI_GPIO_25_24		31
-
-/*
- * Loki General Purpose Pins
- */
-#define IRQ_LOKI_GPIO_START	32
-#define NR_GPIO_IRQS		GPIO_MAX
-
-#define NR_IRQS			(IRQ_LOKI_GPIO_START + NR_GPIO_IRQS)
-
-
-#endif
diff --git a/include/asm-arm/arch-loki/memory.h b/include/asm-arm/arch-loki/memory.h
deleted file mode 100644
index 835101e49875..000000000000
--- a/include/asm-arm/arch-loki/memory.h
+++ /dev/null
@@ -1,14 +0,0 @@
-/*
- * include/asm-arm/arch-loki/memory.h
- */
-
-#ifndef __ASM_ARCH_MEMORY_H
-#define __ASM_ARCH_MEMORY_H
-
-#define PHYS_OFFSET		UL(0x00000000)
-
-#define __virt_to_bus(x)	__virt_to_phys(x)
-#define __bus_to_virt(x)	__phys_to_virt(x)
-
-
-#endif
diff --git a/include/asm-arm/arch-loki/system.h b/include/asm-arm/arch-loki/system.h
deleted file mode 100644
index a3568ac8ec35..000000000000
--- a/include/asm-arm/arch-loki/system.h
+++ /dev/null
@@ -1,37 +0,0 @@
-/*
- * include/asm-arm/arch-loki/system.h
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __ASM_ARCH_SYSTEM_H
-#define __ASM_ARCH_SYSTEM_H
-
-#include <asm/arch/hardware.h>
-#include <asm/arch/loki.h>
-
-static inline void arch_idle(void)
-{
-	cpu_do_idle();
-}
-
-static inline void arch_reset(char mode)
-{
-	/*
-	 * Enable soft reset to assert RSTOUTn.
-	 */
-	writel(SOFT_RESET_OUT_EN, RSTOUTn_MASK);
-
-	/*
-	 * Assert soft reset.
-	 */
-	writel(SOFT_RESET, SYSTEM_SOFT_RESET);
-
-	while (1)
-		;
-}
-
-
-#endif
diff --git a/include/asm-arm/arch-loki/timex.h b/include/asm-arm/arch-loki/timex.h
deleted file mode 100644
index 940014f97cae..000000000000
--- a/include/asm-arm/arch-loki/timex.h
+++ /dev/null
@@ -1,11 +0,0 @@
-/*
- * include/asm-arm/arch-loki/timex.h
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#define CLOCK_TICK_RATE		(100 * HZ)
-
-#define LOKI_TCLK		180000000
diff --git a/include/asm-arm/arch-loki/uncompress.h b/include/asm-arm/arch-loki/uncompress.h
deleted file mode 100644
index 89a0cf88d3a5..000000000000
--- a/include/asm-arm/arch-loki/uncompress.h
+++ /dev/null
@@ -1,47 +0,0 @@
-/*
- * include/asm-arm/arch-loki/uncompress.h
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <linux/serial_reg.h>
-#include <asm/arch/loki.h>
-
-#define SERIAL_BASE	((unsigned char *)UART0_PHYS_BASE)
-
-static void putc(const char c)
-{
-	unsigned char *base = SERIAL_BASE;
-	int i;
-
-	for (i = 0; i < 0x1000; i++) {
-		if (base[UART_LSR << 2] & UART_LSR_THRE)
-			break;
-		barrier();
-	}
-
-	base[UART_TX << 2] = c;
-}
-
-static void flush(void)
-{
-	unsigned char *base = SERIAL_BASE;
-	unsigned char mask;
-	int i;
-
-	mask = UART_LSR_TEMT | UART_LSR_THRE;
-
-	for (i = 0; i < 0x1000; i++) {
-		if ((base[UART_LSR << 2] & mask) == mask)
-			break;
-		barrier();
-	}
-}
-
-/*
- * nothing to do
- */
-#define arch_decomp_setup()
-#define arch_decomp_wdog()
diff --git a/include/asm-arm/arch-loki/vmalloc.h b/include/asm-arm/arch-loki/vmalloc.h
deleted file mode 100644
index f5be06220491..000000000000
--- a/include/asm-arm/arch-loki/vmalloc.h
+++ /dev/null
@@ -1,5 +0,0 @@
-/*
- * include/asm-arm/arch-loki/vmalloc.h
- */
-
-#define VMALLOC_END	0xfe800000
diff --git a/include/asm-arm/arch-msm/board.h b/include/asm-arm/arch-msm/board.h
deleted file mode 100644
index 763051f8ba14..000000000000
--- a/include/asm-arm/arch-msm/board.h
+++ /dev/null
@@ -1,37 +0,0 @@
-/* linux/include/asm-arm/arch-msm/board.h
- *
- * Copyright (C) 2007 Google, Inc.
- * Author: Brian Swetland <swetland@google.com>
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- */
-
-#ifndef __ASM_ARCH_MSM_BOARD_H
-#define __ASM_ARCH_MSM_BOARD_H
-
-#include <linux/types.h>
-
-/* platform device data structures */
-
-struct msm_mddi_platform_data
-{
-	void (*panel_power)(int on);
-	unsigned has_vsync_irq:1;
-};
-
-/* common init routines for use by arch/arm/mach-msm/board-*.c */
-
-void __init msm_add_devices(void);
-void __init msm_map_common_io(void);
-void __init msm_init_irq(void);
-void __init msm_init_gpio(void);
-
-#endif
diff --git a/include/asm-arm/arch-msm/debug-macro.S b/include/asm-arm/arch-msm/debug-macro.S
deleted file mode 100644
index 393d5272e506..000000000000
--- a/include/asm-arm/arch-msm/debug-macro.S
+++ /dev/null
@@ -1,40 +0,0 @@
-/* include/asm-arm/arch-msm7200/debug-macro.S
- *
- * Copyright (C) 2007 Google, Inc.
- * Author: Brian Swetland <swetland@google.com>
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- */
-
-#include <asm/hardware.h>
-#include <asm/arch/msm_iomap.h>
-
-	.macro	addruart,rx
-	@ see if the MMU is enabled and select appropriate base address
-	mrc	p15, 0, \rx, c1, c0
-	tst	\rx, #1
-	ldreq	\rx, =MSM_UART1_PHYS
-	ldrne	\rx, =MSM_UART1_BASE
-	.endm
-
-	.macro	senduart,rd,rx
-	str	\rd, [\rx, #0x0C]
-	.endm
-
-	.macro	waituart,rd,rx
-	@ wait for TX_READY
-1:	ldr	\rd, [\rx, #0x08]
-	tst	\rd, #0x04
-	beq	1b
-	.endm
-
-	.macro	busyuart,rd,rx
-	.endm
diff --git a/include/asm-arm/arch-msm/dma.h b/include/asm-arm/arch-msm/dma.h
deleted file mode 100644
index e4b565b27b35..000000000000
--- a/include/asm-arm/arch-msm/dma.h
+++ /dev/null
@@ -1,151 +0,0 @@
-/* linux/include/asm-arm/arch-msm/dma.h
- *
- * Copyright (C) 2007 Google, Inc.
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- */
-
-#ifndef __ASM_ARCH_MSM_DMA_H
-
-#include <linux/list.h>
-#include <asm/arch/msm_iomap.h>
-
-struct msm_dmov_cmd {
-	struct list_head list;
-	unsigned int cmdptr;
-	void (*complete_func)(struct msm_dmov_cmd *cmd, unsigned int result);
-/*	void (*user_result_func)(struct msm_dmov_cmd *cmd); */
-};
-
-void msm_dmov_enqueue_cmd(unsigned id, struct msm_dmov_cmd *cmd);
-void msm_dmov_stop_cmd(unsigned id, struct msm_dmov_cmd *cmd);
-int msm_dmov_exec_cmd(unsigned id, unsigned int cmdptr);
-/* int msm_dmov_exec_cmd_etc(unsigned id, unsigned int cmdptr, int timeout, int interruptible); */
-
-
-
-#define DMOV_SD0(off, ch) (MSM_DMOV_BASE + 0x0000 + (off) + ((ch) << 2))
-#define DMOV_SD1(off, ch) (MSM_DMOV_BASE + 0x0400 + (off) + ((ch) << 2))
-#define DMOV_SD2(off, ch) (MSM_DMOV_BASE + 0x0800 + (off) + ((ch) << 2))
-#define DMOV_SD3(off, ch) (MSM_DMOV_BASE + 0x0C00 + (off) + ((ch) << 2))
-
-/* only security domain 3 is available to the ARM11
- * SD0 -> mARM trusted, SD1 -> mARM nontrusted, SD2 -> aDSP, SD3 -> aARM
- */
-
-#define DMOV_CMD_PTR(ch)      DMOV_SD3(0x000, ch)
-#define DMOV_CMD_LIST         (0 << 29) /* does not work */
-#define DMOV_CMD_PTR_LIST     (1 << 29) /* works */
-#define DMOV_CMD_INPUT_CFG    (2 << 29) /* untested */
-#define DMOV_CMD_OUTPUT_CFG   (3 << 29) /* untested */
-#define DMOV_CMD_ADDR(addr)   ((addr) >> 3)
-
-#define DMOV_RSLT(ch)         DMOV_SD3(0x040, ch)
-#define DMOV_RSLT_VALID       (1 << 31) /* 0 == host has empties result fifo */
-#define DMOV_RSLT_ERROR       (1 << 3)
-#define DMOV_RSLT_FLUSH       (1 << 2)
-#define DMOV_RSLT_DONE        (1 << 1)  /* top pointer done */
-#define DMOV_RSLT_USER        (1 << 0)  /* command with FR force result */
-
-#define DMOV_FLUSH0(ch)       DMOV_SD3(0x080, ch)
-#define DMOV_FLUSH1(ch)       DMOV_SD3(0x0C0, ch)
-#define DMOV_FLUSH2(ch)       DMOV_SD3(0x100, ch)
-#define DMOV_FLUSH3(ch)       DMOV_SD3(0x140, ch)
-#define DMOV_FLUSH4(ch)       DMOV_SD3(0x180, ch)
-#define DMOV_FLUSH5(ch)       DMOV_SD3(0x1C0, ch)
-
-#define DMOV_STATUS(ch)       DMOV_SD3(0x200, ch)
-#define DMOV_STATUS_RSLT_COUNT(n)    (((n) >> 29))
-#define DMOV_STATUS_CMD_COUNT(n)     (((n) >> 27) & 3)
-#define DMOV_STATUS_RSLT_VALID       (1 << 1)
-#define DMOV_STATUS_CMD_PTR_RDY      (1 << 0)
-
-#define DMOV_ISR              DMOV_SD3(0x380, 0)
-
-#define DMOV_CONFIG(ch)       DMOV_SD3(0x300, ch)
-#define DMOV_CONFIG_FORCE_TOP_PTR_RSLT (1 << 2)
-#define DMOV_CONFIG_FORCE_FLUSH_RSLT   (1 << 1)
-#define DMOV_CONFIG_IRQ_EN             (1 << 0)
-
-/* channel assignments */
-
-#define DMOV_NAND_CHAN        7
-#define DMOV_NAND_CRCI_CMD    5
-#define DMOV_NAND_CRCI_DATA   4
-
-#define DMOV_SDC1_CHAN        8
-#define DMOV_SDC1_CRCI        6
-
-#define DMOV_SDC2_CHAN        8
-#define DMOV_SDC2_CRCI        7
-
-#define DMOV_TSIF_CHAN        10
-#define DMOV_TSIF_CRCI        10
-
-#define DMOV_USB_CHAN         11
-
-/* no client rate control ifc (eg, ram) */
-#define DMOV_NONE_CRCI        0
-
-
-/* If the CMD_PTR register has CMD_PTR_LIST selected, the data mover
- * is going to walk a list of 32bit pointers as described below.  Each
- * pointer points to a *array* of dmov_s, etc structs.  The last pointer
- * in the list is marked with CMD_PTR_LP.  The last struct in each array
- * is marked with CMD_LC (see below).
- */
-#define CMD_PTR_ADDR(addr)  ((addr) >> 3)
-#define CMD_PTR_LP          (1 << 31) /* last pointer */
-#define CMD_PTR_PT          (3 << 29) /* ? */
-
-/* Single Item Mode */
-typedef struct {
-	unsigned cmd;
-	unsigned src;
-	unsigned dst;
-	unsigned len;
-} dmov_s;
-
-/* Scatter/Gather Mode */
-typedef struct {
-	unsigned cmd;
-	unsigned src_dscr;
-	unsigned dst_dscr;
-	unsigned _reserved;
-} dmov_sg;
-
-/* bits for the cmd field of the above structures */
-
-#define CMD_LC      (1 << 31)  /* last command */
-#define CMD_FR      (1 << 22)  /* force result -- does not work? */
-#define CMD_OCU     (1 << 21)  /* other channel unblock */
-#define CMD_OCB     (1 << 20)  /* other channel block */
-#define CMD_TCB     (1 << 19)  /* ? */
-#define CMD_DAH     (1 << 18)  /* destination address hold -- does not work?*/
-#define CMD_SAH     (1 << 17)  /* source address hold -- does not work? */
-
-#define CMD_MODE_SINGLE     (0 << 0) /* dmov_s structure used */
-#define CMD_MODE_SG         (1 << 0) /* untested */
-#define CMD_MODE_IND_SG     (2 << 0) /* untested */
-#define CMD_MODE_BOX        (3 << 0) /* untested */
-
-#define CMD_DST_SWAP_BYTES  (1 << 14) /* exchange each byte n with byte n+1 */
-#define CMD_DST_SWAP_SHORTS (1 << 15) /* exchange each short n with short n+1 */
-#define CMD_DST_SWAP_WORDS  (1 << 16) /* exchange each word n with word n+1 */
-
-#define CMD_SRC_SWAP_BYTES  (1 << 11) /* exchange each byte n with byte n+1 */
-#define CMD_SRC_SWAP_SHORTS (1 << 12) /* exchange each short n with short n+1 */
-#define CMD_SRC_SWAP_WORDS  (1 << 13) /* exchange each word n with word n+1 */
-
-#define CMD_DST_CRCI(n)     (((n) & 15) << 7)
-#define CMD_SRC_CRCI(n)     (((n) & 15) << 3)
-
-#endif
diff --git a/include/asm-arm/arch-msm/entry-macro.S b/include/asm-arm/arch-msm/entry-macro.S
deleted file mode 100644
index ee24aece4cb0..000000000000
--- a/include/asm-arm/arch-msm/entry-macro.S
+++ /dev/null
@@ -1,38 +0,0 @@
-/* include/asm-arm/arch-msm7200/entry-macro.S
- *
- * Copyright (C) 2007 Google, Inc.
- * Author: Brian Swetland <swetland@google.com>
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- */
-
-#include <asm/arch/msm_iomap.h>
-
- 	.macro	disable_fiq
-	.endm
-
-	.macro	get_irqnr_preamble, base, tmp
-	@ enable imprecise aborts
-	cpsie	a
-	mov	\base, #MSM_VIC_BASE
-	.endm
-
-	.macro	arch_ret_to_user, tmp1, tmp2
-	.endm
-
-	.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
-	@ 0xD0 has irq# or old irq# if the irq has been handled
-	@ 0xD4 has irq# or -1 if none pending *but* if you just
-	@ read 0xD4 you never get the first irq for some reason
-	ldr	\irqnr, [\base, #0xD0]
-	ldr	\irqnr, [\base, #0xD4]
-	cmp	\irqnr, #0xffffffff
-	.endm
diff --git a/include/asm-arm/arch-msm/hardware.h b/include/asm-arm/arch-msm/hardware.h
deleted file mode 100644
index 89af2b70182f..000000000000
--- a/include/asm-arm/arch-msm/hardware.h
+++ /dev/null
@@ -1,18 +0,0 @@
-/* linux/include/asm-arm/arch-msm/hardware.h
- *
- * Copyright (C) 2007 Google, Inc.
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- */
-
-#ifndef __ASM_ARCH_MSM_HARDWARE_H
-
-#endif
diff --git a/include/asm-arm/arch-msm/io.h b/include/asm-arm/arch-msm/io.h
deleted file mode 100644
index 4645ae26b62a..000000000000
--- a/include/asm-arm/arch-msm/io.h
+++ /dev/null
@@ -1,33 +0,0 @@
-/* include/asm-arm/arch-msm/io.h
- *
- * Copyright (C) 2007 Google, Inc.
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- */
-
-#ifndef __ASM_ARM_ARCH_IO_H
-#define __ASM_ARM_ARCH_IO_H
-
-#define IO_SPACE_LIMIT 0xffffffff
-
-#define __arch_ioremap __msm_ioremap
-#define __arch_iounmap __iounmap
-
-void __iomem *__msm_ioremap(unsigned long phys_addr, size_t size, unsigned int mtype);
-
-static inline void __iomem *__io(unsigned long addr)
-{
-	return (void __iomem *)addr;
-}
-#define __io(a)         __io(a)
-#define __mem_pci(a)    (a)
-
-#endif
diff --git a/include/asm-arm/arch-msm/irqs.h b/include/asm-arm/arch-msm/irqs.h
deleted file mode 100644
index e62a108b1857..000000000000
--- a/include/asm-arm/arch-msm/irqs.h
+++ /dev/null
@@ -1,90 +0,0 @@
-/* linux/include/asm-arm/arch-msm/irqs.h
- *
- * Copyright (C) 2007 Google, Inc.
- * Author: Brian Swetland <swetland@google.com>
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- */
-
-#ifndef __ASM_ARCH_MSM_IRQS_H
-#define __ASM_ARCH_MSM_IRQS_H
-
-/* MSM ARM11 Interrupt Numbers */
-/* See 80-VE113-1 A, pp219-221     */
-
-#define INT_A9_M2A_0         0
-#define INT_A9_M2A_1         1
-#define INT_A9_M2A_2         2
-#define INT_A9_M2A_3         3
-#define INT_A9_M2A_4         4
-#define INT_A9_M2A_5         5
-#define INT_A9_M2A_6         6
-#define INT_GP_TIMER_EXP     7
-#define INT_DEBUG_TIMER_EXP  8
-#define INT_UART1            9
-#define INT_UART2            10
-#define INT_UART3            11
-#define INT_UART1_RX         12
-#define INT_UART2_RX         13
-#define INT_UART3_RX         14
-#define INT_USB_OTG          15
-#define INT_MDDI_PRI         16
-#define INT_MDDI_EXT         17
-#define INT_MDDI_CLIENT      18
-#define INT_MDP              19
-#define INT_GRAPHICS         20
-#define INT_ADM_AARM         21
-#define INT_ADSP_A11         22
-#define INT_ADSP_A9_A11      23
-#define INT_SDC1_0           24
-#define INT_SDC1_1           25
-#define INT_SDC2_0           26
-#define INT_SDC2_1           27
-#define INT_KEYSENSE         28
-#define INT_TCHSCRN_SSBI     29
-#define INT_TCHSCRN1         30
-#define INT_TCHSCRN2         31
-
-#define INT_GPIO_GROUP1      (32 + 0)
-#define INT_GPIO_GROUP2      (32 + 1)
-#define INT_PWB_I2C          (32 + 2)
-#define INT_SOFTRESET        (32 + 3)
-#define INT_NAND_WR_ER_DONE  (32 + 4)
-#define INT_NAND_OP_DONE     (32 + 5)
-#define INT_PBUS_ARM11       (32 + 6)
-#define INT_AXI_MPU_SMI      (32 + 7)
-#define INT_AXI_MPU_EBI1     (32 + 8)
-#define INT_AD_HSSD          (32 + 9)
-#define INT_ARM11_PMU        (32 + 10)
-#define INT_ARM11_DMA        (32 + 11)
-#define INT_TSIF_IRQ         (32 + 12)
-#define INT_UART1DM_IRQ      (32 + 13)
-#define INT_UART1DM_RX       (32 + 14)
-#define INT_USB_HS           (32 + 15)
-#define INT_SDC3_0           (32 + 16)
-#define INT_SDC3_1           (32 + 17)
-#define INT_SDC4_0           (32 + 18)
-#define INT_SDC4_1           (32 + 19)
-#define INT_UART2DM_RX       (32 + 20)
-#define INT_UART2DM_IRQ      (32 + 21)
-
-/* 22-31 are reserved */
-
-#define MSM_IRQ_BIT(irq)     (1 << ((irq) & 31))
-
-#define NR_MSM_IRQS 64
-#define NR_GPIO_IRQS 122
-#define NR_BOARD_IRQS 64
-#define NR_IRQS (NR_MSM_IRQS + NR_GPIO_IRQS + NR_BOARD_IRQS)
-
-#define MSM_GPIO_TO_INT(n) (NR_MSM_IRQS + (n))
-
-#endif
diff --git a/include/asm-arm/arch-msm/memory.h b/include/asm-arm/arch-msm/memory.h
deleted file mode 100644
index b5ce0e9ac86d..000000000000
--- a/include/asm-arm/arch-msm/memory.h
+++ /dev/null
@@ -1,27 +0,0 @@
-/* linux/include/asm-arm/arch-msm/memory.h
- *
- * Copyright (C) 2007 Google, Inc.
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- */
-
-#ifndef __ASM_ARCH_MEMORY_H
-#define __ASM_ARCH_MEMORY_H
-
-/* physical offset of RAM */
-#define PHYS_OFFSET		UL(0x10000000)
-
-/* bus address and physical addresses are identical */
-#define __virt_to_bus(x)	__virt_to_phys(x)
-#define __bus_to_virt(x)	__phys_to_virt(x)
-
-#endif
-
diff --git a/include/asm-arm/arch-msm/system.h b/include/asm-arm/arch-msm/system.h
deleted file mode 100644
index 7c5544bdd0c7..000000000000
--- a/include/asm-arm/arch-msm/system.h
+++ /dev/null
@@ -1,23 +0,0 @@
-/* linux/include/asm-arm/arch-msm/system.h
- *
- * Copyright (C) 2007 Google, Inc.
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- */
-
-#include <asm/hardware.h>
-
-void arch_idle(void);
-
-static inline void arch_reset(char mode)
-{
-	for (;;) ;  /* depends on IPC w/ other core */
-}
diff --git a/include/asm-arm/arch-msm/timex.h b/include/asm-arm/arch-msm/timex.h
deleted file mode 100644
index 8724487ab4c9..000000000000
--- a/include/asm-arm/arch-msm/timex.h
+++ /dev/null
@@ -1,21 +0,0 @@
-/* linux/include/asm-arm/arch-msm/timex.h
- *
- * Copyright (C) 2007 Google, Inc.
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- */
-
-#ifndef __ASM_ARCH_MSM_TIMEX_H
-#define __ASM_ARCH_MSM_TIMEX_H
-
-#define CLOCK_TICK_RATE		1000000
-
-#endif
diff --git a/include/asm-arm/arch-msm/uncompress.h b/include/asm-arm/arch-msm/uncompress.h
deleted file mode 100644
index e91ed786ffec..000000000000
--- a/include/asm-arm/arch-msm/uncompress.h
+++ /dev/null
@@ -1,36 +0,0 @@
-/* linux/include/asm-arm/arch-msm/uncompress.h
- *
- * Copyright (C) 2007 Google, Inc.
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- */
-
-#ifndef __ASM_ARCH_MSM_UNCOMPRESS_H
-
-#include "hardware.h"
-
-static void putc(int c)
-{
-}
-
-static inline void flush(void)
-{
-}
-
-static inline void arch_decomp_setup(void)
-{
-}
-
-static inline void arch_decomp_wdog(void)
-{
-}
-
-#endif
diff --git a/include/asm-arm/arch-msm/vmalloc.h b/include/asm-arm/arch-msm/vmalloc.h
deleted file mode 100644
index 60f8d910e825..000000000000
--- a/include/asm-arm/arch-msm/vmalloc.h
+++ /dev/null
@@ -1,22 +0,0 @@
-/* linux/include/asm-arm/arch-msm/vmalloc.h
- *
- * Copyright (C) 2007 Google, Inc.
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- */
-
-#ifndef __ASM_ARCH_MSM_VMALLOC_H
-#define __ASM_ARCH_MSM_VMALLOC_H
-
-#define VMALLOC_END	  (PAGE_OFFSET + 0x10000000)
-
-#endif
-
diff --git a/include/asm-arm/arch-mv78xx0/debug-macro.S b/include/asm-arm/arch-mv78xx0/debug-macro.S
deleted file mode 100644
index d0595bd645e5..000000000000
--- a/include/asm-arm/arch-mv78xx0/debug-macro.S
+++ /dev/null
@@ -1,20 +0,0 @@
-/*
- * include/asm-arm/arch-mv78xx0/debug-macro.S
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <asm/arch/mv78xx0.h>
-
-	.macro	addruart,rx
-	mrc	p15, 0, \rx, c1, c0
-	tst	\rx, #1					@ MMU enabled?
-	ldreq	\rx, =MV78XX0_REGS_PHYS_BASE
-	ldrne	\rx, =MV78XX0_REGS_VIRT_BASE
-	orr	\rx, \rx, #0x00012000
-	.endm
-
-#define UART_SHIFT	2
-#include <asm/hardware/debug-8250.S>
diff --git a/include/asm-arm/arch-mv78xx0/entry-macro.S b/include/asm-arm/arch-mv78xx0/entry-macro.S
deleted file mode 100644
index e9a606b12669..000000000000
--- a/include/asm-arm/arch-mv78xx0/entry-macro.S
+++ /dev/null
@@ -1,39 +0,0 @@
-/*
- * include/asm-arm/arch-mv78xx0/entry-macro.S
- *
- * Low-level IRQ helper macros for Marvell MV78xx0 platforms
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <asm/arch/mv78xx0.h>
-
-	.macro  disable_fiq
-	.endm
-
-	.macro  arch_ret_to_user, tmp1, tmp2
-	.endm
-
-	.macro  get_irqnr_preamble, base, tmp
-	ldr	\base, =IRQ_VIRT_BASE
-	.endm
-
-	.macro  get_irqnr_and_base, irqnr, irqstat, base, tmp
-	@ check low interrupts
-	ldr	\irqstat, [\base, #IRQ_CAUSE_LOW_OFF]
-	ldr	\tmp, [\base, #IRQ_MASK_LOW_OFF]
-	mov	\irqnr, #31
-	ands	\irqstat, \irqstat, \tmp
-
-	@ if no low interrupts set, check high interrupts
-	ldreq	\irqstat, [\base, #IRQ_CAUSE_HIGH_OFF]
-	ldreq	\tmp, [\base, #IRQ_MASK_HIGH_OFF]
-	moveq	\irqnr, #63
-	andeqs	\irqstat, \irqstat, \tmp
-
-	@ find first active interrupt source
-	clzne	\irqstat, \irqstat
-	subne	\irqnr, \irqnr, \irqstat
-	.endm
diff --git a/include/asm-arm/arch-mv78xx0/hardware.h b/include/asm-arm/arch-mv78xx0/hardware.h
deleted file mode 100644
index 8e17926086c6..000000000000
--- a/include/asm-arm/arch-mv78xx0/hardware.h
+++ /dev/null
@@ -1,21 +0,0 @@
-/*
- * include/asm-arm/arch-mv78xx0/hardware.h
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __ASM_ARCH_HARDWARE_H
-#define __ASM_ARCH_HARDWARE_H
-
-#include "mv78xx0.h"
-
-#define pcibios_assign_all_busses()	1
-
-#define PCIBIOS_MIN_IO			0x00001000
-#define PCIBIOS_MIN_MEM			0x01000000
-#define PCIMEM_BASE			MV78XX0_PCIE_MEM_PHYS_BASE /* mem base for VGA */
-
-
-#endif
diff --git a/include/asm-arm/arch-mv78xx0/io.h b/include/asm-arm/arch-mv78xx0/io.h
deleted file mode 100644
index 415d4c98e3d1..000000000000
--- a/include/asm-arm/arch-mv78xx0/io.h
+++ /dev/null
@@ -1,26 +0,0 @@
-/*
- * include/asm-arm/arch-mv78xx0/io.h
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __ASM_ARCH_IO_H
-#define __ASM_ARCH_IO_H
-
-#include "mv78xx0.h"
-
-#define IO_SPACE_LIMIT		0xffffffff
-
-static inline void __iomem *__io(unsigned long addr)
-{
-	return (void __iomem *)((addr - MV78XX0_PCIE_IO_PHYS_BASE(0))
-					+ MV78XX0_PCIE_IO_VIRT_BASE(0));
-}
-
-#define __io(a)			__io(a)
-#define __mem_pci(a)		(a)
-
-
-#endif
diff --git a/include/asm-arm/arch-mv78xx0/irqs.h b/include/asm-arm/arch-mv78xx0/irqs.h
deleted file mode 100644
index 75930450cd65..000000000000
--- a/include/asm-arm/arch-mv78xx0/irqs.h
+++ /dev/null
@@ -1,91 +0,0 @@
-/*
- * include/asm-arm/arch-mv78xx0/irqs.h
- *
- * IRQ definitions for Marvell MV78xx0 SoCs
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __ASM_ARCH_IRQS_H
-#define __ASM_ARCH_IRQS_H
-
-#include "mv78xx0.h"	/* need GPIO_MAX */
-
-/*
- * MV78xx0 Low Interrupt Controller
- */
-#define IRQ_MV78XX0_ERR		0
-#define IRQ_MV78XX0_SPI		1
-#define IRQ_MV78XX0_I2C_0	2
-#define IRQ_MV78XX0_I2C_1	3
-#define IRQ_MV78XX0_IDMA_0	4
-#define IRQ_MV78XX0_IDMA_1	5
-#define IRQ_MV78XX0_IDMA_2	6
-#define IRQ_MV78XX0_IDMA_3	7
-#define IRQ_MV78XX0_TIMER_0	8
-#define IRQ_MV78XX0_TIMER_1	9
-#define IRQ_MV78XX0_TIMER_2	10
-#define IRQ_MV78XX0_TIMER_3	11
-#define IRQ_MV78XX0_UART_0	12
-#define IRQ_MV78XX0_UART_1	13
-#define IRQ_MV78XX0_UART_2	14
-#define IRQ_MV78XX0_UART_3	15
-#define IRQ_MV78XX0_USB_0	16
-#define IRQ_MV78XX0_USB_1	17
-#define IRQ_MV78XX0_USB_2	18
-#define IRQ_MV78XX0_CRYPTO	19
-#define IRQ_MV78XX0_SDIO_0	20
-#define IRQ_MV78XX0_SDIO_1	21
-#define IRQ_MV78XX0_XOR_0	22
-#define IRQ_MV78XX0_XOR_1	23
-#define IRQ_MV78XX0_I2S_0	24
-#define IRQ_MV78XX0_I2S_1	25
-#define IRQ_MV78XX0_SATA	26
-#define IRQ_MV78XX0_TDMI	27
-
-/*
- * MV78xx0 High Interrupt Controller
- */
-#define IRQ_MV78XX0_PCIE_00	32
-#define IRQ_MV78XX0_PCIE_01	33
-#define IRQ_MV78XX0_PCIE_02	34
-#define IRQ_MV78XX0_PCIE_03	35
-#define IRQ_MV78XX0_PCIE_10	36
-#define IRQ_MV78XX0_PCIE_11	37
-#define IRQ_MV78XX0_PCIE_12	38
-#define IRQ_MV78XX0_PCIE_13	39
-#define IRQ_MV78XX0_GE00_SUM	40
-#define IRQ_MV78XX0_GE00_RX	41
-#define IRQ_MV78XX0_GE00_TX	42
-#define IRQ_MV78XX0_GE00_MISC	43
-#define IRQ_MV78XX0_GE01_SUM	44
-#define IRQ_MV78XX0_GE01_RX	45
-#define IRQ_MV78XX0_GE01_TX	46
-#define IRQ_MV78XX0_GE01_MISC	47
-#define IRQ_MV78XX0_GE10_SUM	48
-#define IRQ_MV78XX0_GE10_RX	49
-#define IRQ_MV78XX0_GE10_TX	50
-#define IRQ_MV78XX0_GE10_MISC	51
-#define IRQ_MV78XX0_GE11_SUM	52
-#define IRQ_MV78XX0_GE11_RX	53
-#define IRQ_MV78XX0_GE11_TX	54
-#define IRQ_MV78XX0_GE11_MISC	55
-#define IRQ_MV78XX0_GPIO_0_7	56
-#define IRQ_MV78XX0_GPIO_8_15	57
-#define IRQ_MV78XX0_GPIO_16_23	58
-#define IRQ_MV78XX0_GPIO_24_31	59
-#define IRQ_MV78XX0_DB_IN	60
-#define IRQ_MV78XX0_DB_OUT	61
-
-/*
- * MV78XX0 General Purpose Pins
- */
-#define IRQ_MV78XX0_GPIO_START	64
-#define NR_GPIO_IRQS		GPIO_MAX
-
-#define NR_IRQS			(IRQ_MV78XX0_GPIO_START + NR_GPIO_IRQS)
-
-
-#endif
diff --git a/include/asm-arm/arch-mv78xx0/memory.h b/include/asm-arm/arch-mv78xx0/memory.h
deleted file mode 100644
index 721a6b185b91..000000000000
--- a/include/asm-arm/arch-mv78xx0/memory.h
+++ /dev/null
@@ -1,14 +0,0 @@
-/*
- * include/asm-arm/arch-mv78xx0/memory.h
- */
-
-#ifndef __ASM_ARCH_MEMORY_H
-#define __ASM_ARCH_MEMORY_H
-
-#define PHYS_OFFSET		UL(0x00000000)
-
-#define __virt_to_bus(x)	__virt_to_phys(x)
-#define __bus_to_virt(x)	__phys_to_virt(x)
-
-
-#endif
diff --git a/include/asm-arm/arch-mv78xx0/system.h b/include/asm-arm/arch-mv78xx0/system.h
deleted file mode 100644
index 7eb47d376db9..000000000000
--- a/include/asm-arm/arch-mv78xx0/system.h
+++ /dev/null
@@ -1,37 +0,0 @@
-/*
- * include/asm-arm/arch-mv78xx0/system.h
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __ASM_ARCH_SYSTEM_H
-#define __ASM_ARCH_SYSTEM_H
-
-#include <asm/arch/hardware.h>
-#include <asm/arch/mv78xx0.h>
-
-static inline void arch_idle(void)
-{
-	cpu_do_idle();
-}
-
-static inline void arch_reset(char mode)
-{
-	/*
-	 * Enable soft reset to assert RSTOUTn.
-	 */
-	writel(SOFT_RESET_OUT_EN, RSTOUTn_MASK);
-
-	/*
-	 * Assert soft reset.
-	 */
-	writel(SOFT_RESET, SYSTEM_SOFT_RESET);
-
-	while (1)
-		;
-}
-
-
-#endif
diff --git a/include/asm-arm/arch-mv78xx0/timex.h b/include/asm-arm/arch-mv78xx0/timex.h
deleted file mode 100644
index a854b1ccbd01..000000000000
--- a/include/asm-arm/arch-mv78xx0/timex.h
+++ /dev/null
@@ -1,9 +0,0 @@
-/*
- * include/asm-arm/arch-mv78xx0/timex.h
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#define CLOCK_TICK_RATE		(100 * HZ)
diff --git a/include/asm-arm/arch-mv78xx0/uncompress.h b/include/asm-arm/arch-mv78xx0/uncompress.h
deleted file mode 100644
index 3bfe0a293ef7..000000000000
--- a/include/asm-arm/arch-mv78xx0/uncompress.h
+++ /dev/null
@@ -1,47 +0,0 @@
-/*
- * include/asm-arm/arch-mv78xx0/uncompress.h
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <linux/serial_reg.h>
-#include <asm/arch/mv78xx0.h>
-
-#define SERIAL_BASE	((unsigned char *)UART0_PHYS_BASE)
-
-static void putc(const char c)
-{
-	unsigned char *base = SERIAL_BASE;
-	int i;
-
-	for (i = 0; i < 0x1000; i++) {
-		if (base[UART_LSR << 2] & UART_LSR_THRE)
-			break;
-		barrier();
-	}
-
-	base[UART_TX << 2] = c;
-}
-
-static void flush(void)
-{
-	unsigned char *base = SERIAL_BASE;
-	unsigned char mask;
-	int i;
-
-	mask = UART_LSR_TEMT | UART_LSR_THRE;
-
-	for (i = 0; i < 0x1000; i++) {
-		if ((base[UART_LSR << 2] & mask) == mask)
-			break;
-		barrier();
-	}
-}
-
-/*
- * nothing to do
- */
-#define arch_decomp_setup()
-#define arch_decomp_wdog()
diff --git a/include/asm-arm/arch-mv78xx0/vmalloc.h b/include/asm-arm/arch-mv78xx0/vmalloc.h
deleted file mode 100644
index f2c512197579..000000000000
--- a/include/asm-arm/arch-mv78xx0/vmalloc.h
+++ /dev/null
@@ -1,5 +0,0 @@
-/*
- * include/asm-arm/arch-mv78xx0/vmalloc.h
- */
-
-#define VMALLOC_END	0xfe000000
diff --git a/include/asm-arm/arch-mxc/debug-macro.S b/include/asm-arm/arch-mxc/debug-macro.S
deleted file mode 100644
index 575087f8561a..000000000000
--- a/include/asm-arm/arch-mxc/debug-macro.S
+++ /dev/null
@@ -1,49 +0,0 @@
-/* linux/include/asm-arm/arch-imx/debug-macro.S
- *
- * Debugging macro include header
- *
- *  Copyright (C) 1994-1999 Russell King
- *  Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-
-#include <asm/arch/hardware.h>
-
-#ifdef CONFIG_MACH_MX31ADS
-#include <asm/arch/board-mx31ads.h>
-#endif
-#ifdef CONFIG_MACH_PCM037
-#include <asm/arch/board-pcm037.h>
-#endif
-#ifdef CONFIG_MACH_MX31LITE
-#include <asm/arch/board-mx31lite.h>
-#endif
-#ifdef CONFIG_MACH_MX27ADS
-#include <asm/arch/board-mx27ads.h>
-#endif
-#ifdef CONFIG_MACH_PCM038
-#include <asm/arch/board-pcm038.h>
-#endif
-		.macro	addruart,rx
-		mrc	p15, 0, \rx, c1, c0
-		tst	\rx, #1			@ MMU enabled?
-		ldreq	\rx, =MXC_LL_UART_PADDR	@ physical
-		ldrne	\rx, =MXC_LL_UART_VADDR	@ virtual
-		.endm
-
-		.macro	senduart,rd,rx
-		str	\rd, [\rx, #0x40]	@ TXDATA
-		.endm
-
-		.macro	waituart,rd,rx
-		.endm
-
-		.macro	busyuart,rd,rx
-1002:		ldr	\rd, [\rx, #0x98]	@ SR2
-		tst	\rd, #1 << 3		@ TXDC
-		beq	1002b			@ wait until transmit done
-		.endm
diff --git a/include/asm-arm/arch-mxc/gpio.h b/include/asm-arm/arch-mxc/gpio.h
deleted file mode 100644
index d393e15f5a6b..000000000000
--- a/include/asm-arm/arch-mxc/gpio.h
+++ /dev/null
@@ -1,42 +0,0 @@
-/*
- * Copyright 2007 Freescale Semiconductor, Inc. All Rights Reserved.
- * Copyright 2008 Juergen Beisert, kernel@pengutronix.de
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.
- */
-
-#ifndef __ASM_ARCH_MXC_GPIO_H__
-#define __ASM_ARCH_MXC_GPIO_H__
-
-#include <asm/hardware.h>
-#include <asm-generic/gpio.h>
-
-/* use gpiolib dispatchers */
-#define gpio_get_value		__gpio_get_value
-#define gpio_set_value		__gpio_set_value
-#define gpio_cansleep		__gpio_cansleep
-
-#define gpio_to_irq(gpio)	(MXC_MAX_INT_LINES + (gpio))
-#define irq_to_gpio(irq)	((irq) - MXC_MAX_INT_LINES)
-
-struct mxc_gpio_port {
-	void __iomem *base;
-	int irq;
-	int virtual_irq_start;
-	struct gpio_chip chip;
-};
-
-int mxc_gpio_init(struct mxc_gpio_port*, int);
-
-#endif
diff --git a/include/asm-arm/arch-mxc/hardware.h b/include/asm-arm/arch-mxc/hardware.h
deleted file mode 100644
index 37cddbaaade7..000000000000
--- a/include/asm-arm/arch-mxc/hardware.h
+++ /dev/null
@@ -1,37 +0,0 @@
-/*
- * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved.
- * Copyright 2008 Juergen Beisert, kernel@pengutronix.de
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
- * MA  02110-1301, USA.
- */
-
-#ifndef __ASM_ARCH_MXC_HARDWARE_H__
-#define __ASM_ARCH_MXC_HARDWARE_H__
-
-#include <asm/sizes.h>
-
-#ifdef CONFIG_ARCH_MX3
-# include <asm/arch/mx31.h>
-#endif
-
-#ifdef CONFIG_ARCH_MX2
-# ifdef CONFIG_MACH_MX27
-#  include <asm/arch/mx27.h>
-# endif
-#endif
-
-#include <asm/arch/mxc.h>
-
-#endif /* __ASM_ARCH_MXC_HARDWARE_H__ */
diff --git a/include/asm-arm/arch-mxc/irqs.h b/include/asm-arm/arch-mxc/irqs.h
deleted file mode 100644
index f416130718cf..000000000000
--- a/include/asm-arm/arch-mxc/irqs.h
+++ /dev/null
@@ -1,16 +0,0 @@
-/*
- *  Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved.
- */
-
-/*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ASM_ARCH_MXC_IRQS_H__
-#define __ASM_ARCH_MXC_IRQS_H__
-
-#include <asm/hardware.h>
-
-#endif /* __ASM_ARCH_MXC_IRQS_H__ */
diff --git a/include/asm-arm/arch-mxc/memory.h b/include/asm-arm/arch-mxc/memory.h
deleted file mode 100644
index 059f83023a10..000000000000
--- a/include/asm-arm/arch-mxc/memory.h
+++ /dev/null
@@ -1,29 +0,0 @@
-/*
- * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved.
- */
-
-/*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ASM_ARCH_MXC_MEMORY_H__
-#define __ASM_ARCH_MXC_MEMORY_H__
-
-#include <asm/hardware.h>
-
-/*
- * Virtual view <-> DMA view memory address translations
- * This macro is used to translate the virtual address to an address
- * suitable to be passed to set_dma_addr()
- */
-#define __virt_to_bus(a)	__virt_to_phys(a)
-
-/*
- * Used to convert an address for DMA operations to an address that the
- * kernel can use.
- */
-#define __bus_to_virt(a)	__phys_to_virt(a)
-
-#endif /* __ASM_ARCH_MXC_MEMORY_H__ */
diff --git a/include/asm-arm/arch-mxc/timex.h b/include/asm-arm/arch-mxc/timex.h
deleted file mode 100644
index 59019fa58f82..000000000000
--- a/include/asm-arm/arch-mxc/timex.h
+++ /dev/null
@@ -1,25 +0,0 @@
-/*
- *  Copyright (C) 1999 ARM Limited
- * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#ifndef __ASM_ARCH_MXC_TIMEX_H__
-#define __ASM_ARCH_MXC_TIMEX_H__
-
-#include <asm/hardware.h>	/* for CLOCK_TICK_RATE */
-
-#endif				/* __ASM_ARCH_MXC_TIMEX_H__ */
diff --git a/include/asm-arm/arch-mxc/uncompress.h b/include/asm-arm/arch-mxc/uncompress.h
deleted file mode 100644
index 42cc0cb3fefd..000000000000
--- a/include/asm-arm/arch-mxc/uncompress.h
+++ /dev/null
@@ -1,78 +0,0 @@
-/*
- *  include/asm-arm/arch-mxc/uncompress.h
- *
- *
- *
- *  Copyright (C) 1999 ARM Limited
- *  Copyright (C) Shane Nay (shane@minirl.com)
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-#ifndef __ASM_ARCH_MXC_UNCOMPRESS_H__
-#define __ASM_ARCH_MXC_UNCOMPRESS_H__
-
-#define __MXC_BOOT_UNCOMPRESS
-
-#include <asm/hardware.h>
-
-#define UART(x) (*(volatile unsigned long *)(serial_port + (x)))
-
-#define USR2 0x98
-#define USR2_TXFE (1<<14)
-#define TXR  0x40
-#define UCR1 0x80
-#define UCR1_UARTEN 1
-
-/*
- * The following code assumes the serial port has already been
- * initialized by the bootloader.  We search for the first enabled
- * port in the most probable order.  If you didn't setup a port in
- * your bootloader then nothing will appear (which might be desired).
- *
- * This does not append a newline
- */
-
-static void putc(int ch)
-{
-	static unsigned long serial_port = 0;
-
-	if (unlikely(serial_port == 0)) {
-		do {
-			serial_port = UART1_BASE_ADDR;
-			if (UART(UCR1) & UCR1_UARTEN)
-				break;
-			serial_port = UART2_BASE_ADDR;
-			if (UART(UCR1) & UCR1_UARTEN)
-				break;
-			return;
-		} while (0);
-	}
-
-	while (!(UART(USR2) & USR2_TXFE))
-		barrier();
-
-	UART(TXR) = ch;
-}
-
-#define flush() do { } while (0)
-
-/*
- * nothing to do
- */
-#define arch_decomp_setup()
-
-#define arch_decomp_wdog()
-
-#endif				/* __ASM_ARCH_MXC_UNCOMPRESS_H__ */
diff --git a/include/asm-arm/arch-netx/debug-macro.S b/include/asm-arm/arch-netx/debug-macro.S
deleted file mode 100644
index a940d0e80cb2..000000000000
--- a/include/asm-arm/arch-netx/debug-macro.S
+++ /dev/null
@@ -1,38 +0,0 @@
-/* linux/include/asm-arm/arch-netx/debug-macro.S
- *
- * Debugging macro include header
- *
- *  Copyright (C) 1994-1999 Russell King
- *  Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
-*/
-
-#include "hardware.h"
-
-		.macro	addruart,rx
-		mrc	p15, 0, \rx, c1, c0
-		tst	\rx, #1			@ MMU enabled?
-		moveq	\rx, #0x00100000		@ physical
-		movne	\rx, #io_p2v(0x00100000)	@ virtual
-		orr	\rx, \rx, #0x00000a00
-		.endm
-
-		.macro	senduart,rd,rx
-		str	\rd, [\rx, #0]
-		.endm
-
-		.macro	busyuart,rd,rx
-1002:		ldr	\rd, [\rx, #0x18]
-		tst	\rd, #(1 << 3)
-		bne	1002b
-		.endm
-
-		.macro	waituart,rd,rx
-1001:		ldr	\rd, [\rx, #0x18]
-		tst	\rd, #(1 << 3)
-		bne	1001b
-		.endm
diff --git a/include/asm-arm/arch-netx/dma.h b/include/asm-arm/arch-netx/dma.h
deleted file mode 100644
index 4eda5feed81c..000000000000
--- a/include/asm-arm/arch-netx/dma.h
+++ /dev/null
@@ -1,21 +0,0 @@
-/*
- *  linux/include/asm-arm/arch-netx/dma.h
- *
- * Copyright (C) 2005 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2
- * as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#define MAX_DMA_CHANNELS 0
-#define MAX_DMA_ADDRESS ~0
diff --git a/include/asm-arm/arch-netx/entry-macro.S b/include/asm-arm/arch-netx/entry-macro.S
deleted file mode 100644
index 83ad188a0847..000000000000
--- a/include/asm-arm/arch-netx/entry-macro.S
+++ /dev/null
@@ -1,41 +0,0 @@
-/*
- * include/asm-arm/arch-netx/entry-macro.S
- *
- * Low-level IRQ helper macros for Hilscher netX based platforms
- *
- * Copyright (C) 2005 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2
- * as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-#include <asm/hardware.h>
-
-		.macro  disable_fiq
-		.endm
-
-		.macro  get_irqnr_preamble, base, tmp
-		.endm
-
-		.macro  arch_ret_to_user, tmp1, tmp2
-		.endm
-
-		.macro  get_irqnr_and_base, irqnr, irqstat, base, tmp
-		mov	\base, #io_p2v(0x00100000)
-		add	\base, \base, #0x000ff000
-
-		ldr	\irqstat, [\base, #0]
-		clz	\irqnr, \irqstat
-		rsb     \irqnr, \irqnr, #31
-		cmp	\irqstat, #0
-		.endm
-
diff --git a/include/asm-arm/arch-netx/hardware.h b/include/asm-arm/arch-netx/hardware.h
deleted file mode 100644
index 7786c45455cd..000000000000
--- a/include/asm-arm/arch-netx/hardware.h
+++ /dev/null
@@ -1,39 +0,0 @@
-/*
- * include/asm-arm/arch-netx/hardware.h
- *
- * Copyright (C) 2005 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2
- * as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-#ifndef __ASM_ARCH_HARDWARE_H
-#define __ASM_ARCH_HARDWARE_H
-
-#define NETX_IO_PHYS	0x00100000
-#define NETX_IO_VIRT	0xe0000000
-#define NETX_IO_SIZE	0x00100000
-
-#define SRAM_INTERNAL_PHYS_0 0x00000
-#define SRAM_INTERNAL_PHYS_1 0x08000
-#define SRAM_INTERNAL_PHYS_2 0x10000
-#define SRAM_INTERNAL_PHYS_3 0x18000
-#define SRAM_INTERNAL_PHYS(no) ((no) * 0x8000)
-
-#define XPEC_MEM_SIZE 0x4000
-#define XMAC_MEM_SIZE 0x1000
-#define SRAM_MEM_SIZE 0x8000
-
-#define io_p2v(x) ((x) - NETX_IO_PHYS + NETX_IO_VIRT)
-#define io_v2p(x) ((x) - NETX_IO_VIRT + NETX_IO_PHYS)
-
-#endif
diff --git a/include/asm-arm/arch-netx/io.h b/include/asm-arm/arch-netx/io.h
deleted file mode 100644
index a7a53f80165d..000000000000
--- a/include/asm-arm/arch-netx/io.h
+++ /dev/null
@@ -1,28 +0,0 @@
-/*
- *  linux/include/asm-arm/arch-netx/io.h
- *
- * Copyright (C) 2005 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2
- * as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#ifndef __ASM_ARM_ARCH_IO_H
-#define __ASM_ARM_ARCH_IO_H
-
-#define IO_SPACE_LIMIT 0xffffffff
-
-#define __io(a)         ((void __iomem *)(a))
-#define __mem_pci(a)            (a)
-
-#endif
diff --git a/include/asm-arm/arch-netx/irqs.h b/include/asm-arm/arch-netx/irqs.h
deleted file mode 100644
index a487dc6e2661..000000000000
--- a/include/asm-arm/arch-netx/irqs.h
+++ /dev/null
@@ -1,70 +0,0 @@
-/*
- * include/asm-arm/arch-netx/irqs.h
- *
- * Copyright (C) 2005 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2
- * as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#define NETX_IRQ_VIC_START   0
-#define NETX_IRQ_SOFTINT     0
-#define NETX_IRQ_TIMER0      1
-#define NETX_IRQ_TIMER1      2
-#define NETX_IRQ_TIMER2      3
-#define NETX_IRQ_SYSTIME_NS  4
-#define NETX_IRQ_SYSTIME_S   5
-#define NETX_IRQ_GPIO_15     6
-#define NETX_IRQ_WATCHDOG    7
-#define NETX_IRQ_UART0       8
-#define NETX_IRQ_UART1       9
-#define NETX_IRQ_UART2      10
-#define NETX_IRQ_USB        11
-#define NETX_IRQ_SPI        12
-#define NETX_IRQ_I2C        13
-#define NETX_IRQ_LCD        14
-#define NETX_IRQ_HIF        15
-#define NETX_IRQ_GPIO_0_14  16
-#define NETX_IRQ_XPEC0      17
-#define NETX_IRQ_XPEC1      18
-#define NETX_IRQ_XPEC2      19
-#define NETX_IRQ_XPEC3      20
-#define NETX_IRQ_XPEC(no)   (17 + (no))
-#define NETX_IRQ_MSYNC0     21
-#define NETX_IRQ_MSYNC1     22
-#define NETX_IRQ_MSYNC2     23
-#define NETX_IRQ_MSYNC3     24
-#define NETX_IRQ_IRQ_PHY    25
-#define NETX_IRQ_ISO_AREA   26
-/* int 27 is reserved */
-/* int 28 is reserved */
-#define NETX_IRQ_TIMER3     29
-#define NETX_IRQ_TIMER4     30
-/* int 31 is reserved */
-
-#define NETX_IRQS 32
-
-/* for multiplexed irqs on gpio 0..14 */
-#define NETX_IRQ_GPIO(x) (NETX_IRQS + (x))
-#define NETX_IRQ_GPIO_LAST NETX_IRQ_GPIO(14)
-
-/* Host interface interrupts */
-#define NETX_IRQ_HIF_CHAINED(x)    (NETX_IRQ_GPIO_LAST + 1 + (x))
-#define NETX_IRQ_HIF_PIO35         NETX_IRQ_HIF_CHAINED(0)
-#define NETX_IRQ_HIF_PIO36         NETX_IRQ_HIF_CHAINED(1)
-#define NETX_IRQ_HIF_PIO40         NETX_IRQ_HIF_CHAINED(2)
-#define NETX_IRQ_HIF_PIO47         NETX_IRQ_HIF_CHAINED(3)
-#define NETX_IRQ_HIF_PIO72         NETX_IRQ_HIF_CHAINED(4)
-#define NETX_IRQ_HIF_LAST          NETX_IRQ_HIF_CHAINED(4)
-
-#define NR_IRQS (NETX_IRQ_HIF_LAST + 1)
diff --git a/include/asm-arm/arch-netx/memory.h b/include/asm-arm/arch-netx/memory.h
deleted file mode 100644
index 6d8d2df3e99d..000000000000
--- a/include/asm-arm/arch-netx/memory.h
+++ /dev/null
@@ -1,36 +0,0 @@
-/*
- *  linux/include/asm-arm/arch-netx/memory.h
- *
- * Copyright (C) 2005 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2
- * as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#ifndef __ASM_ARCH_MEMORY_H
-#define __ASM_ARCH_MEMORY_H
-
-#define PHYS_OFFSET UL(0x80000000)
-
-/*
- * Virtual view <-> DMA view memory address translations
- * virt_to_bus: Used to translate the virtual address to an
- *              address suitable to be passed to set_dma_addr
- * bus_to_virt: Used to convert an address for DMA operations
- *              to an address that the kernel can use.
- */
-#define __virt_to_bus(x)         __virt_to_phys(x)
-#define __bus_to_virt(x)         __phys_to_virt(x)
-
-#endif
-
diff --git a/include/asm-arm/arch-netx/param.h b/include/asm-arm/arch-netx/param.h
deleted file mode 100644
index 7a80c26178a8..000000000000
--- a/include/asm-arm/arch-netx/param.h
+++ /dev/null
@@ -1,18 +0,0 @@
-/*
- *  linux/include/asm-arm/arch-netx/param.h
- *
- * Copyright (C) 2005 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2
- * as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
diff --git a/include/asm-arm/arch-netx/system.h b/include/asm-arm/arch-netx/system.h
deleted file mode 100644
index 52adf368d765..000000000000
--- a/include/asm-arm/arch-netx/system.h
+++ /dev/null
@@ -1,38 +0,0 @@
-/*
- * include/asm-arm/arch-netx/system.h
- *
- * Copyright (C) 2005 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2
- * as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-#ifndef __ASM_ARCH_SYSTEM_H
-#define __ASM_ARCH_SYSTEM_H
-
-#include <asm/io.h>
-#include <asm/hardware.h>
-#include "netx-regs.h"
-
-static inline void arch_idle(void)
-{
-	cpu_do_idle();
-}
-
-static inline void arch_reset(char mode)
-{
-	writel(NETX_SYSTEM_RES_CR_FIRMW_RES_EN | NETX_SYSTEM_RES_CR_FIRMW_RES,
-	       NETX_SYSTEM_RES_CR);
-}
-
-#endif
-
diff --git a/include/asm-arm/arch-netx/timex.h b/include/asm-arm/arch-netx/timex.h
deleted file mode 100644
index 7fdb42da0b40..000000000000
--- a/include/asm-arm/arch-netx/timex.h
+++ /dev/null
@@ -1,20 +0,0 @@
-/*
- * include/asm-arm/arch-netx/timex.h
- *
- * Copyright (C) 2005 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2
- * as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#define CLOCK_TICK_RATE 100000000
diff --git a/include/asm-arm/arch-netx/uncompress.h b/include/asm-arm/arch-netx/uncompress.h
deleted file mode 100644
index f89434547102..000000000000
--- a/include/asm-arm/arch-netx/uncompress.h
+++ /dev/null
@@ -1,76 +0,0 @@
-/*
- * include/asm-arm/arch-netx/uncompress.h
- *
- * Copyright (C) 2005 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2
- * as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-/*
- * The following code assumes the serial port has already been
- * initialized by the bootloader.  We search for the first enabled
- * port in the most probable order.  If you didn't setup a port in
- * your bootloader then nothing will appear (which might be desired).
- *
- * This does not append a newline
- */
-
-#define REG(x) (*(volatile unsigned long *)(x))
-
-#define UART1_BASE 0x100a00
-#define UART2_BASE 0x100a80
-
-#define UART_DR 0x0
-
-#define UART_CR 0x14
-#define CR_UART_EN (1<<0)
-
-#define UART_FR 0x18
-#define FR_BUSY (1<<3)
-#define FR_TXFF (1<<5)
-
-static void putc(char c)
-{
-	unsigned long base;
-
-	if (REG(UART1_BASE + UART_CR) & CR_UART_EN)
-		base = UART1_BASE;
-	else if (REG(UART2_BASE + UART_CR) & CR_UART_EN)
-		base = UART2_BASE;
-	else
-		return;
-
-	while (REG(base + UART_FR) & FR_TXFF);
-	REG(base + UART_DR) = c;
-}
-
-static inline void flush(void)
-{
-	unsigned long base;
-
-	if (REG(UART1_BASE + UART_CR) & CR_UART_EN)
-		base = UART1_BASE;
-	else if (REG(UART2_BASE + UART_CR) & CR_UART_EN)
-		base = UART2_BASE;
-	else
-		return;
-
-	while (REG(base + UART_FR) & FR_BUSY);
-}
-
-/*
- * nothing to do
- */
-#define arch_decomp_setup()
-#define arch_decomp_wdog()
diff --git a/include/asm-arm/arch-netx/vmalloc.h b/include/asm-arm/arch-netx/vmalloc.h
deleted file mode 100644
index da2da5a595da..000000000000
--- a/include/asm-arm/arch-netx/vmalloc.h
+++ /dev/null
@@ -1,19 +0,0 @@
-/*
- *  linux/include/asm-arm/arch-netx/vmalloc.h
- *
- * Copyright (C) 2005 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2
- * as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-#define VMALLOC_END       (PAGE_OFFSET + 0x10000000)
diff --git a/include/asm-arm/arch-ns9xxx/board.h b/include/asm-arm/arch-ns9xxx/board.h
deleted file mode 100644
index e57443bdbbd9..000000000000
--- a/include/asm-arm/arch-ns9xxx/board.h
+++ /dev/null
@@ -1,42 +0,0 @@
-/*
- * include/asm-arm/arch-ns9xxx/board.h
- *
- * Copyright (C) 2006,2007 by Digi International Inc.
- * All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published by
- * the Free Software Foundation.
- */
-#ifndef __ASM_ARCH_BOARD_H
-#define __ASM_ARCH_BOARD_H
-
-#include <asm/mach-types.h>
-
-#define board_is_a9m9750dev()	(0			\
-		|| machine_is_cc9p9360dev()		\
-		|| machine_is_cc9p9750dev()		\
-		)
-
-#define board_is_a9mvali()	(0			\
-		|| machine_is_cc9p9360val() 		\
-		|| machine_is_cc9p9750val()		\
-		)
-
-#define board_is_jscc9p9210()	(0			\
-		|| machine_is_cc9p9210js()		\
-		)
-
-#define board_is_jscc9p9215()	(0			\
-		|| machine_is_cc9p9215js()		\
-		)
-
-#define board_is_jscc9p9360()	(0			\
-		|| machine_is_cc9p9360js()		\
-		)
-
-#define board_is_uncbas()	(0			\
-		|| machine_is_cc7ucamry()		\
-		)
-
-#endif /* ifndef __ASM_ARCH_BOARD_H */
diff --git a/include/asm-arm/arch-ns9xxx/debug-macro.S b/include/asm-arm/arch-ns9xxx/debug-macro.S
deleted file mode 100644
index b21b93eb2dbc..000000000000
--- a/include/asm-arm/arch-ns9xxx/debug-macro.S
+++ /dev/null
@@ -1,22 +0,0 @@
-/*
- * include/asm-arm/arch-ns9xxx/debug-macro.S
- * Copyright (C) 2006 by Digi International Inc.
- * All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published by
- * the Free Software Foundation.
- */
-#include <asm/hardware.h>
-
-#include <asm/arch-ns9xxx/regs-board-a9m9750dev.h>
-
-		.macro	addruart,rx
-		mrc	p15, 0, \rx, c1, c0
-		tst	\rx, #1
-		ldreq	\rx, =NS9XXX_CSxSTAT_PHYS(0)
-		ldrne	\rx, =io_p2v(NS9XXX_CSxSTAT_PHYS(0))
-		.endm
-
-#define UART_SHIFT	2
-#include <asm/hardware/debug-8250.S>
diff --git a/include/asm-arm/arch-ns9xxx/dma.h b/include/asm-arm/arch-ns9xxx/dma.h
deleted file mode 100644
index a67cbbe009c4..000000000000
--- a/include/asm-arm/arch-ns9xxx/dma.h
+++ /dev/null
@@ -1,14 +0,0 @@
-/*
- * include/asm-arm/arch-ns9xxx/dma.h
- *
- * Copyright (C) 2006 by Digi International Inc.
- * All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published by
- * the Free Software Foundation.
- */
-#ifndef __ASM_ARCH_DMA_H
-#define __ASM_ARCH_DMA_H
-
-#endif /* ifndef __ASM_ARCH_DMA_H */
diff --git a/include/asm-arm/arch-ns9xxx/entry-macro.S b/include/asm-arm/arch-ns9xxx/entry-macro.S
deleted file mode 100644
index 89a21c530468..000000000000
--- a/include/asm-arm/arch-ns9xxx/entry-macro.S
+++ /dev/null
@@ -1,28 +0,0 @@
-/*
- * include/asm-arm/arch-ns9xxx/entry-macro.S
- *
- * Copyright (C) 2006,2007 by Digi International Inc.
- * All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published by
- * the Free Software Foundation.
- */
-#include <asm/hardware.h>
-#include <asm/arch-ns9xxx/regs-sys-common.h>
-
-		.macro	get_irqnr_preamble, base, tmp
-		ldr	\base, =SYS_ISRADDR
-		.endm
-
-		.macro	arch_ret_to_user, tmp1, tmp2
-		.endm
-
-		.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
-		ldr	\irqstat, [\base, #(SYS_ISA - SYS_ISRADDR)]
-		cmp	\irqstat, #0
-		ldrne	\irqnr, [\base]
-		.endm
-
-		.macro	disable_fiq
-		.endm
diff --git a/include/asm-arm/arch-ns9xxx/gpio.h b/include/asm-arm/arch-ns9xxx/gpio.h
deleted file mode 100644
index adbca08583c0..000000000000
--- a/include/asm-arm/arch-ns9xxx/gpio.h
+++ /dev/null
@@ -1,47 +0,0 @@
-/*
- * include/asm-arm/arch-ns9xxx/gpio.h
- *
- * Copyright (C) 2007 by Digi International Inc.
- * All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published by
- * the Free Software Foundation.
-*/
-#ifndef __ASM_ARCH_GPIO_H
-#define __ASM_ARCH_GPIO_H
-
-#include <asm/errno.h>
-
-int gpio_request(unsigned gpio, const char *label);
-
-void gpio_free(unsigned gpio);
-
-int ns9xxx_gpio_configure(unsigned gpio, int inv, int func);
-
-int gpio_direction_input(unsigned gpio);
-
-int gpio_direction_output(unsigned gpio, int value);
-
-int gpio_get_value(unsigned gpio);
-
-void gpio_set_value(unsigned gpio, int value);
-
-/*
- * ns9xxx can use gpio pins to trigger an irq, but it's not generic
- * enough to be supported by the gpio_to_irq/irq_to_gpio interface
- */
-static inline int gpio_to_irq(unsigned gpio)
-{
-	return -EINVAL;
-}
-
-static inline int irq_to_gpio(unsigned irq)
-{
-	return -EINVAL;
-}
-
-/* get the cansleep() stubs */
-#include <asm-generic/gpio.h>
-
-#endif /* ifndef __ASM_ARCH_GPIO_H */
diff --git a/include/asm-arm/arch-ns9xxx/hardware.h b/include/asm-arm/arch-ns9xxx/hardware.h
deleted file mode 100644
index 0dca11ce21fc..000000000000
--- a/include/asm-arm/arch-ns9xxx/hardware.h
+++ /dev/null
@@ -1,79 +0,0 @@
-/*
- * include/asm-arm/arch-ns9xxx/hardware.h
- *
- * Copyright (C) 2006 by Digi International Inc.
- * All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published by
- * the Free Software Foundation.
- */
-#ifndef __ASM_ARCH_HARDWARE_H
-#define __ASM_ARCH_HARDWARE_H
-
-#include <asm/memory.h>
-
-/*
- * NetSilicon NS9xxx internal mapping:
- *
- * physical                <--> virtual
- * 0x90000000 - 0x906fffff <--> 0xf9000000 - 0xf96fffff
- * 0xa0100000 - 0xa0afffff <--> 0xfa100000 - 0xfaafffff
- */
-#define io_p2v(x)	(0xf0000000 \
-			 + (((x) & 0xf0000000) >> 4) \
-			 + ((x) & 0x00ffffff))
-
-#define io_v2p(x)	((((x) & 0x0f000000) << 4) \
-			 + ((x) & 0x00ffffff))
-
-#define __REGSHIFT(mask)	((mask) & (-(mask)))
-
-#define __REGBIT(bit)		((u32)1 << (bit))
-#define __REGBITS(hbit, lbit)	((((u32)1 << ((hbit) - (lbit) + 1)) - 1) << (lbit))
-#define __REGVAL(mask, value)	(((value) * __REGSHIFT(mask)) & (mask))
-
-#ifndef __ASSEMBLY__
-
-#  define __REG(x)	((void __iomem __force *)io_p2v((x)))
-#  define __REG2(x, y)	((void __iomem __force *)(io_p2v((x)) + 4 * (y)))
-
-#  define __REGSET(var, field, value)					\
-	((var) = (((var) & ~((field) & ~(value))) | (value)))
-
-#  define REGSET(var, reg, field, value)				\
-	__REGSET(var, reg ## _ ## field, reg ## _ ## field ## _ ## value)
-
-#  define REGSET_IDX(var, reg, field, idx, value)			\
-	__REGSET(var, reg ## _ ## field((idx)), reg ## _ ## field ## _ ## value((idx)))
-
-#  define REGSETIM(var, reg, field, value)				\
-	__REGSET(var, reg ## _ ## field, __REGVAL(reg ## _ ## field, (value)))
-
-#  define REGSETIM_IDX(var, reg, field, idx, value)			\
-	__REGSET(var, reg ## _ ## field((idx)), __REGVAL(reg ## _ ## field((idx)), (value)))
-
-#  define __REGGET(var, field)						\
-	(((var) & (field)))
-
-#  define REGGET(var, reg, field)					\
-	 __REGGET(var, reg ## _ ## field)
-
-#  define REGGET_IDX(var, reg, field, idx)				\
-	 __REGGET(var, reg ## _ ## field((idx)))
-
-#  define REGGETIM(var, reg, field)					\
-	 __REGGET(var, reg ## _ ## field) / __REGSHIFT(reg ## _ ## field)
-
-#  define REGGETIM_IDX(var, reg, field, idx)				\
-	 __REGGET(var, reg ## _ ## field((idx))) /			\
-	 __REGSHIFT(reg ## _ ## field((idx)))
-
-#else
-
-#  define __REG(x)	io_p2v(x)
-#  define __REG2(x, y)	io_p2v((x) + 4 * (y))
-
-#endif
-
-#endif /* ifndef __ASM_ARCH_HARDWARE_H */
diff --git a/include/asm-arm/arch-ns9xxx/io.h b/include/asm-arm/arch-ns9xxx/io.h
deleted file mode 100644
index 6f82d28af120..000000000000
--- a/include/asm-arm/arch-ns9xxx/io.h
+++ /dev/null
@@ -1,20 +0,0 @@
-/*
- * include/asm-arm/arch-ns9xxx/io.h
- *
- * Copyright (C) 2006 by Digi International Inc.
- * All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published by
- * the Free Software Foundation.
- */
-#ifndef __ASM_ARCH_IO_H
-#define __ASM_ARCH_IO_H
-
-#define IO_SPACE_LIMIT  0xffffffff /* XXX */
-
-#define __io(a)         ((void __iomem *)(a))
-#define __mem_pci(a)    (a)
-#define __mem_isa(a)    (IO_BASE + (a))
-
-#endif /* ifndef __ASM_ARCH_IO_H */
diff --git a/include/asm-arm/arch-ns9xxx/irqs.h b/include/asm-arm/arch-ns9xxx/irqs.h
deleted file mode 100644
index e83d48ec42c9..000000000000
--- a/include/asm-arm/arch-ns9xxx/irqs.h
+++ /dev/null
@@ -1,86 +0,0 @@
-/*
- * include/asm-arm/arch-ns9xxx/irqs.h
- *
- * Copyright (C) 2006,2007 by Digi International Inc.
- * All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published by
- * the Free Software Foundation.
- */
-#ifndef __ASM_ARCH_IRQS_H
-#define __ASM_ARCH_IRQS_H
-
-/* NetSilicon 9360 */
-#define IRQ_NS9XXX_WATCHDOG	0
-#define IRQ_NS9XXX_AHBBUSERR	1
-#define IRQ_NS9360_BBUSAGG	2
-/* irq 3 is reserved for NS9360 */
-#define IRQ_NS9XXX_ETHRX	4
-#define IRQ_NS9XXX_ETHTX	5
-#define IRQ_NS9XXX_ETHPHY	6
-#define IRQ_NS9360_LCD		7
-#define IRQ_NS9360_SERBRX	8
-#define IRQ_NS9360_SERBTX	9
-#define IRQ_NS9360_SERARX	10
-#define IRQ_NS9360_SERATX	11
-#define IRQ_NS9360_SERCRX	12
-#define IRQ_NS9360_SERCTX	13
-#define IRQ_NS9360_I2C		14
-#define IRQ_NS9360_BBUSDMA	15
-#define IRQ_NS9360_TIMER0	16
-#define IRQ_NS9360_TIMER1	17
-#define IRQ_NS9360_TIMER2	18
-#define IRQ_NS9360_TIMER3	19
-#define IRQ_NS9360_TIMER4	20
-#define IRQ_NS9360_TIMER5	21
-#define IRQ_NS9360_TIMER6	22
-#define IRQ_NS9360_TIMER7	23
-#define IRQ_NS9360_RTC		24
-#define IRQ_NS9360_USBHOST	25
-#define IRQ_NS9360_USBDEVICE	26
-#define IRQ_NS9360_IEEE1284	27
-#define IRQ_NS9XXX_EXT0		28
-#define IRQ_NS9XXX_EXT1		29
-#define IRQ_NS9XXX_EXT2		30
-#define IRQ_NS9XXX_EXT3		31
-
-#define BBUS_IRQ(irq)	(32 + irq)
-
-#define IRQ_BBUS_DMA		BBUS_IRQ(0)
-#define IRQ_BBUS_SERBRX		BBUS_IRQ(2)
-#define IRQ_BBUS_SERBTX		BBUS_IRQ(3)
-#define IRQ_BBUS_SERARX		BBUS_IRQ(4)
-#define IRQ_BBUS_SERATX		BBUS_IRQ(5)
-#define IRQ_BBUS_SERCRX		BBUS_IRQ(6)
-#define IRQ_BBUS_SERCTX		BBUS_IRQ(7)
-#define IRQ_BBUS_SERDRX		BBUS_IRQ(8)
-#define IRQ_BBUS_SERDTX		BBUS_IRQ(9)
-#define IRQ_BBUS_I2C		BBUS_IRQ(10)
-#define IRQ_BBUS_1284		BBUS_IRQ(11)
-#define IRQ_BBUS_UTIL		BBUS_IRQ(12)
-#define IRQ_BBUS_RTC		BBUS_IRQ(13)
-#define IRQ_BBUS_USBHST		BBUS_IRQ(14)
-#define IRQ_BBUS_USBDEV		BBUS_IRQ(15)
-#define IRQ_BBUS_AHBDMA1	BBUS_IRQ(24)
-#define IRQ_BBUS_AHBDMA2	BBUS_IRQ(25)
-
-/*
- * these Interrupts are specific for the a9m9750dev board.
- * They are generated by an FPGA that interrupts the CPU on
- * IRQ_NS9360_EXT2
- */
-#define FPGA_IRQ(irq)	(64 + irq)
-
-#define IRQ_FPGA_UARTA		FPGA_IRQ(0)
-#define IRQ_FPGA_UARTB		FPGA_IRQ(1)
-#define IRQ_FPGA_UARTC		FPGA_IRQ(2)
-#define IRQ_FPGA_UARTD		FPGA_IRQ(3)
-#define IRQ_FPGA_TOUCH		FPGA_IRQ(4)
-#define IRQ_FPGA_CF		FPGA_IRQ(5)
-#define IRQ_FPGA_CAN0		FPGA_IRQ(6)
-#define IRQ_FPGA_CAN1		FPGA_IRQ(7)
-
-#define NR_IRQS	72
-
-#endif /* __ASM_ARCH_IRQS_H */
diff --git a/include/asm-arm/arch-ns9xxx/memory.h b/include/asm-arm/arch-ns9xxx/memory.h
deleted file mode 100644
index ce1343e593e1..000000000000
--- a/include/asm-arm/arch-ns9xxx/memory.h
+++ /dev/null
@@ -1,27 +0,0 @@
-/*
- * include/asm-arm/arch-ns9xxx/memory.h
- *
- * Copyright (C) 2006 by Digi International Inc.
- * All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published by
- * the Free Software Foundation.
-*/
-#ifndef __ASM_ARCH_MEMORY_H
-#define __ASM_ARCH_MEMORY_H
-
-/* x in [0..3] */
-#define NS9XXX_CSxSTAT_PHYS(x)	UL(((x) + 4) << 28)
-
-#define NS9XXX_CS0STAT_LENGTH	UL(0x1000)
-#define NS9XXX_CS1STAT_LENGTH	UL(0x1000)
-#define NS9XXX_CS2STAT_LENGTH	UL(0x1000)
-#define NS9XXX_CS3STAT_LENGTH	UL(0x1000)
-
-#define PHYS_OFFSET	UL(0x00000000)
-
-#define __virt_to_bus(x) __virt_to_phys(x)
-#define __bus_to_virt(x) __phys_to_virt(x)
-
-#endif
diff --git a/include/asm-arm/arch-ns9xxx/module.h b/include/asm-arm/arch-ns9xxx/module.h
deleted file mode 100644
index ac08a31111e4..000000000000
--- a/include/asm-arm/arch-ns9xxx/module.h
+++ /dev/null
@@ -1,60 +0,0 @@
-/*
- * include/asm-arm/arch-ns9xxx/module.h
- *
- * Copyright (C) 2007 by Digi International Inc.
- * All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published by
- * the Free Software Foundation.
- */
-#ifndef __ASM_ARCH_MODULE_H
-#define __ASM_ARCH_MODULE_H
-
-#include <asm/mach-types.h>
-
-#define module_is_cc7ucamry()	(0			\
-		|| machine_is_cc7ucamry()		\
-		)
-
-#define module_is_cc9c()	(0			\
-		|| machine_is_cc9c()			\
-		)
-
-#define module_is_cc9p9210()	(0			\
-		|| machine_is_cc9p9210()		\
-		|| machine_is_cc9p9210js()		\
-		)
-
-#define module_is_cc9p9215()	(0			\
-		|| machine_is_cc9p9215()		\
-		|| machine_is_cc9p9215js()		\
-		)
-
-#define module_is_cc9p9360()	(0			\
-		|| machine_is_a9m9360()			\
-		|| machine_is_cc9p9360dev()		\
-		|| machine_is_cc9p9360js()		\
-		|| machine_is_cc9p9360val()		\
-		)
-
-#define module_is_cc9p9750()	(0			\
-		|| machine_is_a9m9750()			\
-		|| machine_is_cc9p9750dev()		\
-		|| machine_is_cc9p9750js()		\
-		|| machine_is_cc9p9750val()		\
-		)
-
-#define module_is_ccw9c()	(0			\
-		|| machine_is_ccw9c()			\
-		)
-
-#define module_is_inc20otter()	(0			\
-		|| machine_is_inc20otter()		\
-		)
-
-#define module_is_otter()	(0			\
-		|| machine_is_otter()			\
-		)
-
-#endif /* ifndef __ASM_ARCH_MODULE_H */
diff --git a/include/asm-arm/arch-ns9xxx/processor.h b/include/asm-arm/arch-ns9xxx/processor.h
deleted file mode 100644
index f7b53b65de81..000000000000
--- a/include/asm-arm/arch-ns9xxx/processor.h
+++ /dev/null
@@ -1,42 +0,0 @@
-/*
- * include/asm-arm/arch-ns9xxx/processor.h
- *
- * Copyright (C) 2006,2007 by Digi International Inc.
- * All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published by
- * the Free Software Foundation.
- */
-#ifndef __ASM_ARCH_PROCESSOR_H
-#define __ASM_ARCH_PROCESSOR_H
-
-#include <asm/arch-ns9xxx/module.h>
-
-#define processor_is_ns9210()	(0			\
-		|| module_is_cc7ucamry()		\
-		|| module_is_cc9p9210()			\
-		|| module_is_inc20otter()		\
-		|| module_is_otter()			\
-		)
-
-#define processor_is_ns9215()	(0			\
-		|| module_is_cc9p9215()			\
-		)
-
-#define processor_is_ns9360()	(0			\
-		|| module_is_cc9p9360()			\
-		|| module_is_cc9c()			\
-		|| module_is_ccw9c()			\
-		)
-
-#define processor_is_ns9750()	(0			\
-		|| module_is_cc9p9750()			\
-		)
-
-#define processor_is_ns921x()	(0			\
-		|| processor_is_ns9210()		\
-		|| processor_is_ns9215()		\
-		)
-
-#endif /* ifndef __ASM_ARCH_PROCESSOR_H */
diff --git a/include/asm-arm/arch-ns9xxx/regs-mem.h b/include/asm-arm/arch-ns9xxx/regs-mem.h
deleted file mode 100644
index fb455a0ed845..000000000000
--- a/include/asm-arm/arch-ns9xxx/regs-mem.h
+++ /dev/null
@@ -1,135 +0,0 @@
-/*
- * include/asm-arm/arch-ns9xxx/regs-mem.h
- *
- * Copyright (C) 2006 by Digi International Inc.
- * All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published by
- * the Free Software Foundation.
- */
-#ifndef __ASM_ARCH_REGSMEM_H
-#define __ASM_ARCH_REGSMEM_H
-
-#include <asm/hardware.h>
-
-/* Memory Module */
-
-/* Control register */
-#define MEM_CTRL	__REG(0xa0700000)
-
-/* Status register */
-#define MEM_STAT	__REG(0xa0700004)
-
-/* Configuration register */
-#define MEM_CONF	__REG(0xa0700008)
-
-/* Dynamic Memory Control register */
-#define MEM_DMCTRL	__REG(0xa0700020)
-
-/* Dynamic Memory Refresh Timer */
-#define MEM_DMRT	__REG(0xa0700024)
-
-/* Dynamic Memory Read Configuration register */
-#define MEM_DMRC	__REG(0xa0700028)
-
-/* Dynamic Memory Precharge Command Period (tRP) */
-#define MEM_DMPCP	__REG(0xa0700030)
-
-/* Dynamic Memory Active to Precharge Command Period (tRAS) */
-#define MEM_DMAPCP	__REG(0xa0700034)
-
-/* Dynamic Memory Self-Refresh Exit Time (tSREX) */
-#define MEM_DMSRET	__REG(0xa0700038)
-
-/* Dynamic Memory Last Data Out to Active Time (tAPR) */
-#define MEM_DMLDOAT	__REG(0xa070003c)
-
-/* Dynamic Memory Data-in to Active Command Time (tDAL or TAPW) */
-#define MEM_DMDIACT	__REG(0xa0700040)
-
-/* Dynamic Memory Write Recovery Time (tWR, tDPL, tRWL, tRDL) */
-#define MEM_DMWRT	__REG(0xa0700044)
-
-/* Dynamic Memory Active to Active Command Period (tRC) */
-#define MEM_DMAACP	__REG(0xa0700048)
-
-/* Dynamic Memory Auto Refresh Period, and Auto Refresh to Active Command Period (tRFC) */
-#define MEM_DMARP	__REG(0xa070004c)
-
-/* Dynamic Memory Exit Self-Refresh to Active Command (tXSR) */
-#define MEM_DMESRAC	__REG(0xa0700050)
-
-/* Dynamic Memory Active Bank A to Active B Time (tRRD) */
-#define MEM_DMABAABT	__REG(0xa0700054)
-
-/* Dynamic Memory Load Mode register to Active Command Time (tMRD) */
-#define MEM_DMLMACT	__REG(0xa0700058)
-
-/* Static Memory Extended Wait */
-#define MEM_SMEW	__REG(0xa0700080)
-
-/* Dynamic Memory Configuration Register x */
-#define MEM_DMCONF(x) 	__REG2(0xa0700100, (x) << 3)
-
-/* Dynamic Memory RAS and CAS Delay x */
-#define MEM_DMRCD(x)	__REG2(0xa0700104, (x) << 3)
-
-/* Static Memory Configuration Register x */
-#define MEM_SMC(x)	__REG2(0xa0700200, (x) << 3)
-
-/* Static Memory Configuration Register x: Write protect */
-#define MEM_SMC_PSMC		__REGBIT(20)
-#define MEM_SMC_PSMC_OFF		__REGVAL(MEM_SMC_PSMC, 0)
-#define MEM_SMC_PSMC_ON			__REGVAL(MEM_SMC_PSMC, 1)
-
-/* Static Memory Configuration Register x: Buffer enable */
-#define MEM_SMC_BSMC		__REGBIT(19)
-#define MEM_SMC_BSMC_OFF		__REGVAL(MEM_SMC_BSMC, 0)
-#define MEM_SMC_BSMC_ON			__REGVAL(MEM_SMC_BSMC, 1)
-
-/* Static Memory Configuration Register x: Extended Wait */
-#define MEM_SMC_EW		__REGBIT(8)
-#define MEM_SMC_EW_OFF			__REGVAL(MEM_SMC_EW, 0)
-#define MEM_SMC_EW_ON			__REGVAL(MEM_SMC_EW, 1)
-
-/* Static Memory Configuration Register x: Byte lane state */
-#define MEM_SMC_PB		__REGBIT(7)
-#define MEM_SMC_PB_0			__REGVAL(MEM_SMC_PB, 0)
-#define MEM_SMC_PB_1			__REGVAL(MEM_SMC_PB, 1)
-
-/* Static Memory Configuration Register x: Chip select polarity */
-#define MEM_SMC_PC		__REGBIT(6)
-#define MEM_SMC_PC_AL			__REGVAL(MEM_SMC_PC, 0)
-#define MEM_SMC_PC_AH			__REGVAL(MEM_SMC_PC, 1)
-
-/* static memory configuration register x: page mode*/
-#define MEM_SMC_PM		__REGBIT(3)
-#define MEM_SMC_PM_DIS			__REGVAL(MEM_SMC_PM, 0)
-#define MEM_SMC_PM_ASYNC		__REGVAL(MEM_SMC_PM, 1)
-
-/* static memory configuration register x: Memory width */
-#define MEM_SMC_MW		__REGBITS(1, 0)
-#define MEM_SMC_MW_8			__REGVAL(MEM_SMC_MW, 0)
-#define MEM_SMC_MW_16			__REGVAL(MEM_SMC_MW, 1)
-#define MEM_SMC_MW_32			__REGVAL(MEM_SMC_MW, 2)
-
-/* Static Memory Write Enable Delay x */
-#define MEM_SMWED(x)	__REG2(0xa0700204, (x) << 3)
-
-/* Static Memory Output Enable Delay x */
-#define MEM_SMOED(x)	__REG2(0xa0700208, (x) << 3)
-
-/* Static Memory Read Delay x */
-#define MEM_SMRD(x)	__REG2(0xa070020c, (x) << 3)
-
-/* Static Memory Page Mode Read Delay 0 */
-#define MEM_SMPMRD(x)	__REG2(0xa0700210, (x) << 3)
-
-/* Static Memory Write Delay */
-#define MEM_SMWD(x)	__REG2(0xa0700214, (x) << 3)
-
-/* Static Memory Turn Round Delay x */
-#define MEM_SWT(x)	__REG2(0xa0700218, (x) << 3)
-
-#endif /* ifndef __ASM_ARCH_REGSMEM_H */
diff --git a/include/asm-arm/arch-ns9xxx/system.h b/include/asm-arm/arch-ns9xxx/system.h
deleted file mode 100644
index 1348073afe48..000000000000
--- a/include/asm-arm/arch-ns9xxx/system.h
+++ /dev/null
@@ -1,35 +0,0 @@
-/*
- * include/asm-arm/arch-ns9xxx/system.h
- *
- * Copyright (C) 2006,2007 by Digi International Inc.
- * All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published by
- * the Free Software Foundation.
- */
-#ifndef __ASM_ARCH_SYSTEM_H
-#define __ASM_ARCH_SYSTEM_H
-
-#include <asm/proc-fns.h>
-#include <asm/arch-ns9xxx/processor.h>
-#include <asm/arch-ns9xxx/processor-ns9360.h>
-
-static inline void arch_idle(void)
-{
-	cpu_do_idle();
-}
-
-static inline void arch_reset(char mode)
-{
-#ifdef CONFIG_PROCESSOR_NS9360
-	if (processor_is_ns9360())
-		ns9360_reset(mode);
-	else
-#endif
-		BUG();
-
-	BUG();
-}
-
-#endif /* ifndef __ASM_ARCH_SYSTEM_H */
diff --git a/include/asm-arm/arch-ns9xxx/timex.h b/include/asm-arm/arch-ns9xxx/timex.h
deleted file mode 100644
index f776cbd2622d..000000000000
--- a/include/asm-arm/arch-ns9xxx/timex.h
+++ /dev/null
@@ -1,20 +0,0 @@
-/*
- * include/asm-arm/arch-ns9xxx/timex.h
- *
- * Copyright (C) 2005-2006 by Digi International Inc.
- * All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published by
- * the Free Software Foundation.
- */
-#ifndef __ASM_ARCH_TIMEX_H
-#define __ASM_ARCH_TIMEX_H
-
-/*
- * value for CLOCK_TICK_RATE stolen from include/asm-arm/arch-s3c2410/timex.h.
- * See there for an explanation.
- */
-#define CLOCK_TICK_RATE         12000000
-
-#endif /* ifndef __ASM_ARCH_TIMEX_H */
diff --git a/include/asm-arm/arch-ns9xxx/uncompress.h b/include/asm-arm/arch-ns9xxx/uncompress.h
deleted file mode 100644
index 71066baceab7..000000000000
--- a/include/asm-arm/arch-ns9xxx/uncompress.h
+++ /dev/null
@@ -1,164 +0,0 @@
-/*
- * include/asm-arm/arch-ns9xxx/uncompress.h
- *
- * Copyright (C) 2006 by Digi International Inc.
- * All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published by
- * the Free Software Foundation.
- */
-#ifndef __ASM_ARCH_UNCOMPRESS_H
-#define __ASM_ARCH_UNCOMPRESS_H
-
-#include <asm/io.h>
-
-#define __REG(x)	((void __iomem __force *)(x))
-
-static void putc_dummy(char c, void __iomem *base)
-{
-	/* nothing */
-}
-
-static void putc_ns9360(char c, void __iomem *base)
-{
-	static int t = 0x10000;
-	do {
-		if (t)
-			--t;
-
-		if (__raw_readl(base + 8) & (1 << 3)) {
-			__raw_writeb(c, base + 16);
-			t = 0x10000;
-			break;
-		}
-	} while (t);
-}
-
-static void putc_a9m9750dev(char c, void __iomem *base)
-{
-	static int t = 0x10000;
-	do {
-		if (t)
-			--t;
-
-		if (__raw_readb(base + 5) & (1 << 5)) {
-			__raw_writeb(c, base);
-			t = 0x10000;
-			break;
-		}
-	} while (t);
-
-}
-
-static void putc_ns921x(char c, void __iomem *base)
-{
-	static int t = 0x10000;
-	do {
-		if (t)
-			--t;
-
-		if (!(__raw_readl(base) & (1 << 11))) {
-			__raw_writeb(c, base + 0x0028);
-			t = 0x10000;
-			break;
-		}
-	} while (t);
-}
-
-#define MSCS __REG(0xA0900184)
-
-#define NS9360_UARTA	__REG(0x90200040)
-#define NS9360_UARTB	__REG(0x90200000)
-#define NS9360_UARTC	__REG(0x90300000)
-#define NS9360_UARTD	__REG(0x90300040)
-
-#define NS9360_UART_ENABLED(base)					\
-		(__raw_readl(NS9360_UARTA) & (1 << 31))
-
-#define A9M9750DEV_UARTA	__REG(0x40000000)
-
-#define NS921XSYS_CLOCK	__REG(0xa090017c)
-#define NS921X_UARTA	__REG(0x90010000)
-#define NS921X_UARTB	__REG(0x90018000)
-#define NS921X_UARTC	__REG(0x90020000)
-#define NS921X_UARTD	__REG(0x90028000)
-
-#define NS921X_UART_ENABLED(base)					\
-		(__raw_readl((base) + 0x1000) & (1 << 29))
-
-static void autodetect(void (**putc)(char, void __iomem *), void __iomem **base)
-{
-	if (((__raw_readl(MSCS) >> 16) & 0xfe) == 0x00) {
-		/* ns9360 or ns9750 */
-		if (NS9360_UART_ENABLED(NS9360_UARTA)) {
-			*putc = putc_ns9360;
-			*base = NS9360_UARTA;
-			return;
-		} else if (NS9360_UART_ENABLED(NS9360_UARTB)) {
-			*putc = putc_ns9360;
-			*base = NS9360_UARTB;
-			return;
-		} else if (NS9360_UART_ENABLED(NS9360_UARTC)) {
-			*putc = putc_ns9360;
-			*base = NS9360_UARTC;
-			return;
-		} else if (NS9360_UART_ENABLED(NS9360_UARTD)) {
-			*putc = putc_ns9360;
-			*base = NS9360_UARTD;
-			return;
-		} else if (__raw_readl(__REG(0xa09001f4)) == 0xfffff001) {
-			*putc = putc_a9m9750dev;
-			*base = A9M9750DEV_UARTA;
-			return;
-		}
-	} else if (((__raw_readl(MSCS) >> 16) & 0xfe) == 0x02) {
-		/* ns921x */
-		u32 clock = __raw_readl(NS921XSYS_CLOCK);
-
-		if ((clock & (1 << 1)) &&
-				NS921X_UART_ENABLED(NS921X_UARTA)) {
-			*putc = putc_ns921x;
-			*base = NS921X_UARTA;
-			return;
-		} else if ((clock & (1 << 2)) &&
-				NS921X_UART_ENABLED(NS921X_UARTB)) {
-			*putc = putc_ns921x;
-			*base = NS921X_UARTB;
-			return;
-		} else if ((clock & (1 << 3)) &&
-				NS921X_UART_ENABLED(NS921X_UARTC)) {
-			*putc = putc_ns921x;
-			*base = NS921X_UARTC;
-			return;
-		} else if ((clock & (1 << 4)) &&
-				NS921X_UART_ENABLED(NS921X_UARTD)) {
-			*putc = putc_ns921x;
-			*base = NS921X_UARTD;
-			return;
-		}
-	}
-
-	*putc = putc_dummy;
-}
-
-void (*myputc)(char, void __iomem *);
-void __iomem *base;
-
-static void putc(char c)
-{
-	myputc(c, base);
-}
-
-static void arch_decomp_setup(void)
-{
-	autodetect(&myputc, &base);
-}
-#define arch_decomp_wdog()
-
-static void flush(void)
-{
-	/* nothing */
-}
-
-#endif /* ifndef __ASM_ARCH_UNCOMPRESS_H */
diff --git a/include/asm-arm/arch-ns9xxx/vmalloc.h b/include/asm-arm/arch-ns9xxx/vmalloc.h
deleted file mode 100644
index 2f3cb6f6be24..000000000000
--- a/include/asm-arm/arch-ns9xxx/vmalloc.h
+++ /dev/null
@@ -1,16 +0,0 @@
-/*
- * include/asm-arm/arch-ns9xxx/vmalloc.h
- *
- * Copyright (C) 2006 by Digi International Inc.
- * All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published by
- * the Free Software Foundation.
- */
-#ifndef __ASM_ARCH_VMALLOC_H
-#define __ASM_ARCH_VMALLOC_H
-
-#define VMALLOC_END     (0xf0000000)
-
-#endif /* ifndef __ASM_ARCH_VMALLOC_H */
diff --git a/include/asm-arm/arch-omap/board.h b/include/asm-arm/arch-omap/board.h
deleted file mode 100644
index db44c5d1f1a0..000000000000
--- a/include/asm-arm/arch-omap/board.h
+++ /dev/null
@@ -1,186 +0,0 @@
-/*
- *  linux/include/asm-arm/arch-omap/board.h
- *
- *  Information structures for board-specific data
- *
- *  Copyright (C) 2004	Nokia Corporation
- *  Written by Juha Yrjölä <juha.yrjola@nokia.com>
- */
-
-#ifndef _OMAP_BOARD_H
-#define _OMAP_BOARD_H
-
-#include <linux/types.h>
-
-#include <asm/arch/gpio-switch.h>
-
-/* Different peripheral ids */
-#define OMAP_TAG_CLOCK		0x4f01
-#define OMAP_TAG_MMC		0x4f02
-#define OMAP_TAG_SERIAL_CONSOLE 0x4f03
-#define OMAP_TAG_USB		0x4f04
-#define OMAP_TAG_LCD		0x4f05
-#define OMAP_TAG_GPIO_SWITCH	0x4f06
-#define OMAP_TAG_UART		0x4f07
-#define OMAP_TAG_FBMEM		0x4f08
-#define OMAP_TAG_STI_CONSOLE	0x4f09
-#define OMAP_TAG_CAMERA_SENSOR	0x4f0a
-
-#define OMAP_TAG_BOOT_REASON    0x4f80
-#define OMAP_TAG_FLASH_PART	0x4f81
-#define OMAP_TAG_VERSION_STR	0x4f82
-
-struct omap_clock_config {
-	/* 0 for 12 MHz, 1 for 13 MHz and 2 for 19.2 MHz */
-	u8 system_clock_type;
-};
-
-struct omap_mmc_conf {
-	unsigned enabled:1;
-	/* nomux means "standard" muxing is wrong on this board, and that
-	 * board-specific code handled it before common init logic.
-	 */
-	unsigned nomux:1;
-	/* switch pin can be for card detect (default) or card cover */
-	unsigned cover:1;
-	/* 4 wire signaling is optional, and is only used for SD/SDIO */
-	unsigned wire4:1;
-	s16 power_pin;
-	s16 switch_pin;
-	s16 wp_pin;
-};
-
-struct omap_mmc_config {
-	struct omap_mmc_conf mmc[2];
-};
-
-struct omap_serial_console_config {
-	u8 console_uart;
-	u32 console_speed;
-};
-
-struct omap_sti_console_config {
-	unsigned enable:1;
-	u8 channel;
-};
-
-struct omap_camera_sensor_config {
-	u16 reset_gpio;
-	int (*power_on)(void * data);
-	int (*power_off)(void * data);
-};
-
-struct omap_usb_config {
-	/* Configure drivers according to the connectors on your board:
-	 *  - "A" connector (rectagular)
-	 *	... for host/OHCI use, set "register_host".
-	 *  - "B" connector (squarish) or "Mini-B"
-	 *	... for device/gadget use, set "register_dev".
-	 *  - "Mini-AB" connector (very similar to Mini-B)
-	 *	... for OTG use as device OR host, initialize "otg"
-	 */
-	unsigned	register_host:1;
-	unsigned	register_dev:1;
-	u8		otg;	/* port number, 1-based:  usb1 == 2 */
-
-	u8		hmc_mode;
-
-	/* implicitly true if otg:  host supports remote wakeup? */
-	u8		rwc;
-
-	/* signaling pins used to talk to transceiver on usbN:
-	 *  0 == usbN unused
-	 *  2 == usb0-only, using internal transceiver
-	 *  3 == 3 wire bidirectional
-	 *  4 == 4 wire bidirectional
-	 *  6 == 6 wire unidirectional (or TLL)
-	 */
-	u8		pins[3];
-};
-
-struct omap_lcd_config {
-	char panel_name[16];
-	char ctrl_name[16];
-	s16  nreset_gpio;
-	u8   data_lines;
-};
-
-struct device;
-struct fb_info;
-struct omap_backlight_config {
-	int default_intensity;
-	int (*set_power)(struct device *dev, int state);
-	int (*check_fb)(struct fb_info *fb);
-};
-
-struct omap_fbmem_config {
-	u32 start;
-	u32 size;
-};
-
-struct omap_pwm_led_platform_data {
-	const char *name;
-	int intensity_timer;
-	int blink_timer;
-	void (*set_power)(struct omap_pwm_led_platform_data *self, int on_off);
-};
-
-/* See include/asm-arm/arch-omap/gpio-switch.h for definitions */
-struct omap_gpio_switch_config {
-	char name[12];
-	u16 gpio;
-	int flags:4;
-	int type:4;
-	int key_code:24; /* Linux key code */
-};
-
-struct omap_uart_config {
-	/* Bit field of UARTs present; bit 0 --> UART1 */
-	unsigned int enabled_uarts;
-};
-
-
-struct omap_flash_part_config {
-	char part_table[0];
-};
-
-struct omap_boot_reason_config {
-	char reason_str[12];
-};
-
-struct omap_version_config {
-	char component[12];
-	char version[12];
-};
-
-
-#include <asm-arm/arch-omap/board-nokia.h>
-
-struct omap_board_config_entry {
-	u16 tag;
-	u16 len;
-	u8  data[0];
-};
-
-struct omap_board_config_kernel {
-	u16 tag;
-	const void *data;
-};
-
-extern const void *__omap_get_config(u16 tag, size_t len, int nr);
-
-#define omap_get_config(tag, type) \
-	((const type *) __omap_get_config((tag), sizeof(type), 0))
-#define omap_get_nr_config(tag, type, nr) \
-	((const type *) __omap_get_config((tag), sizeof(type), (nr)))
-
-extern const void *omap_get_var_config(u16 tag, size_t *len);
-
-extern struct omap_board_config_kernel *omap_board_config;
-extern int omap_board_config_size;
-
-
-/* for TI reference platforms sharing the same debug card */
-extern int debug_card_init(u32 addr, unsigned gpio);
-
-#endif
diff --git a/include/asm-arm/arch-omap/clock.h b/include/asm-arm/arch-omap/clock.h
deleted file mode 100644
index 4c7b3514f71a..000000000000
--- a/include/asm-arm/arch-omap/clock.h
+++ /dev/null
@@ -1,162 +0,0 @@
-/*
- *  linux/include/asm-arm/arch-omap/clock.h
- *
- *  Copyright (C) 2004 - 2005 Nokia corporation
- *  Written by Tuukka Tikkanen <tuukka.tikkanen@elektrobit.com>
- *  Based on clocks.h by Tony Lindgren, Gordon McNutt and RidgeRun, Inc
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ARCH_ARM_OMAP_CLOCK_H
-#define __ARCH_ARM_OMAP_CLOCK_H
-
-struct module;
-struct clk;
-
-#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
-
-struct clksel_rate {
-	u8			div;
-	u32			val;
-	u8			flags;
-};
-
-struct clksel {
-	struct clk		 *parent;
-	const struct clksel_rate *rates;
-};
-
-struct dpll_data {
-	void __iomem		*mult_div1_reg;
-	u32			mult_mask;
-	u32			div1_mask;
-	u16			last_rounded_m;
-	u8			last_rounded_n;
-	unsigned long		last_rounded_rate;
-	unsigned int		rate_tolerance;
-	u16			max_multiplier;
-	u8			max_divider;
-	u32			max_tolerance;
-#  if defined(CONFIG_ARCH_OMAP3)
-	u8			modes;
-	void __iomem		*control_reg;
-	u32			enable_mask;
-	u8			auto_recal_bit;
-	u8			recal_en_bit;
-	u8			recal_st_bit;
-	void __iomem		*autoidle_reg;
-	u32			autoidle_mask;
-	void __iomem		*idlest_reg;
-	u8			idlest_bit;
-#  endif
-};
-
-#endif
-
-struct clk {
-	struct list_head	node;
-	struct module		*owner;
-	const char		*name;
-	int			id;
-	struct clk		*parent;
-	unsigned long		rate;
-	__u32			flags;
-	void __iomem		*enable_reg;
-	__u8			enable_bit;
-	__s8			usecount;
-	void			(*recalc)(struct clk *);
-	int			(*set_rate)(struct clk *, unsigned long);
-	long			(*round_rate)(struct clk *, unsigned long);
-	void			(*init)(struct clk *);
-	int			(*enable)(struct clk *);
-	void			(*disable)(struct clk *);
-#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
-	u8			fixed_div;
-	void __iomem		*clksel_reg;
-	u32			clksel_mask;
-	const struct clksel	*clksel;
-	struct dpll_data	*dpll_data;
-#else
-	__u8			rate_offset;
-	__u8			src_offset;
-#endif
-#if defined(CONFIG_PM_DEBUG) && defined(CONFIG_DEBUG_FS)
-	struct dentry		*dent;	/* For visible tree hierarchy */
-#endif
-};
-
-struct cpufreq_frequency_table;
-
-struct clk_functions {
-	int		(*clk_enable)(struct clk *clk);
-	void		(*clk_disable)(struct clk *clk);
-	long		(*clk_round_rate)(struct clk *clk, unsigned long rate);
-	int		(*clk_set_rate)(struct clk *clk, unsigned long rate);
-	int		(*clk_set_parent)(struct clk *clk, struct clk *parent);
-	struct clk *	(*clk_get_parent)(struct clk *clk);
-	void		(*clk_allow_idle)(struct clk *clk);
-	void		(*clk_deny_idle)(struct clk *clk);
-	void		(*clk_disable_unused)(struct clk *clk);
-#ifdef CONFIG_CPU_FREQ
-	void		(*clk_init_cpufreq_table)(struct cpufreq_frequency_table **);
-#endif
-};
-
-extern unsigned int mpurate;
-
-extern int clk_init(struct clk_functions * custom_clocks);
-extern int clk_register(struct clk *clk);
-extern void clk_unregister(struct clk *clk);
-extern void propagate_rate(struct clk *clk);
-extern void recalculate_root_clocks(void);
-extern void followparent_recalc(struct clk * clk);
-extern void clk_allow_idle(struct clk *clk);
-extern void clk_deny_idle(struct clk *clk);
-extern int clk_get_usecount(struct clk *clk);
-extern void clk_enable_init_clocks(void);
-
-/* Clock flags */
-#define RATE_CKCTL		(1 << 0)	/* Main fixed ratio clocks */
-#define RATE_FIXED		(1 << 1)	/* Fixed clock rate */
-#define RATE_PROPAGATES		(1 << 2)	/* Program children too */
-#define VIRTUAL_CLOCK		(1 << 3)	/* Composite clock from table */
-#define ALWAYS_ENABLED		(1 << 4)	/* Clock cannot be disabled */
-#define ENABLE_REG_32BIT	(1 << 5)	/* Use 32-bit access */
-#define VIRTUAL_IO_ADDRESS	(1 << 6)	/* Clock in virtual address */
-#define CLOCK_IDLE_CONTROL	(1 << 7)
-#define CLOCK_NO_IDLE_PARENT	(1 << 8)
-#define DELAYED_APP		(1 << 9)	/* Delay application of clock */
-#define CONFIG_PARTICIPANT	(1 << 10)	/* Fundamental clock */
-#define ENABLE_ON_INIT		(1 << 11)	/* Enable upon framework init */
-#define INVERT_ENABLE           (1 << 12)       /* 0 enables, 1 disables */
-/* bits 13-20 are currently free */
-#define CLOCK_IN_OMAP310	(1 << 21)
-#define CLOCK_IN_OMAP730	(1 << 22)
-#define CLOCK_IN_OMAP1510	(1 << 23)
-#define CLOCK_IN_OMAP16XX	(1 << 24)
-#define CLOCK_IN_OMAP242X	(1 << 25)
-#define CLOCK_IN_OMAP243X	(1 << 26)
-#define CLOCK_IN_OMAP343X	(1 << 27)	/* clocks common to all 343X */
-#define PARENT_CONTROLS_CLOCK	(1 << 28)
-#define CLOCK_IN_OMAP3430ES1	(1 << 29)	/* 3430ES1 clocks only */
-#define CLOCK_IN_OMAP3430ES2	(1 << 30)	/* 3430ES2 clocks only */
-
-/* Clksel_rate flags */
-#define DEFAULT_RATE		(1 << 0)
-#define RATE_IN_242X		(1 << 1)
-#define RATE_IN_243X		(1 << 2)
-#define RATE_IN_343X		(1 << 3)	/* rates common to all 343X */
-#define RATE_IN_3430ES2		(1 << 4)	/* 3430ES2 rates only */
-
-#define RATE_IN_24XX		(RATE_IN_242X | RATE_IN_243X)
-
-
-/* CM_CLKSEL2_PLL.CORE_CLK_SRC options (24XX) */
-#define CORE_CLK_SRC_32K		0
-#define CORE_CLK_SRC_DPLL		1
-#define CORE_CLK_SRC_DPLL_X2		2
-
-#endif
diff --git a/include/asm-arm/arch-omap/cpu.h b/include/asm-arm/arch-omap/cpu.h
deleted file mode 100644
index 52db09f83281..000000000000
--- a/include/asm-arm/arch-omap/cpu.h
+++ /dev/null
@@ -1,402 +0,0 @@
-/*
- * linux/include/asm-arm/arch-omap/cpu.h
- *
- * OMAP cpu type detection
- *
- * Copyright (C) 2004, 2008 Nokia Corporation
- *
- * Written by Tony Lindgren <tony.lindgren@nokia.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- *
- */
-
-#ifndef __ASM_ARCH_OMAP_CPU_H
-#define __ASM_ARCH_OMAP_CPU_H
-
-struct omap_chip_id {
-	u8 oc;
-};
-
-#define OMAP_CHIP_INIT(x)	{ .oc = x }
-
-extern unsigned int system_rev;
-
-#define omap2_cpu_rev()		((system_rev >> 12) & 0x0f)
-
-/*
- * Test if multicore OMAP support is needed
- */
-#undef MULTI_OMAP1
-#undef MULTI_OMAP2
-#undef OMAP_NAME
-
-#ifdef CONFIG_ARCH_OMAP730
-# ifdef OMAP_NAME
-#  undef  MULTI_OMAP1
-#  define MULTI_OMAP1
-# else
-#  define OMAP_NAME omap730
-# endif
-#endif
-#ifdef CONFIG_ARCH_OMAP15XX
-# ifdef OMAP_NAME
-#  undef  MULTI_OMAP1
-#  define MULTI_OMAP1
-# else
-#  define OMAP_NAME omap1510
-# endif
-#endif
-#ifdef CONFIG_ARCH_OMAP16XX
-# ifdef OMAP_NAME
-#  undef  MULTI_OMAP1
-#  define MULTI_OMAP1
-# else
-#  define OMAP_NAME omap16xx
-# endif
-#endif
-#if (defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX))
-# if (defined(OMAP_NAME) || defined(MULTI_OMAP1))
-#  error "OMAP1 and OMAP2 can't be selected at the same time"
-# endif
-#endif
-#ifdef CONFIG_ARCH_OMAP2420
-# ifdef OMAP_NAME
-#  undef  MULTI_OMAP2
-#  define MULTI_OMAP2
-# else
-#  define OMAP_NAME omap2420
-# endif
-#endif
-#ifdef CONFIG_ARCH_OMAP2430
-# ifdef OMAP_NAME
-#  undef  MULTI_OMAP2
-#  define MULTI_OMAP2
-# else
-#  define OMAP_NAME omap2430
-# endif
-#endif
-#ifdef CONFIG_ARCH_OMAP3430
-# ifdef OMAP_NAME
-#  undef  MULTI_OMAP2
-#  define MULTI_OMAP2
-# else
-#  define OMAP_NAME omap3430
-# endif
-#endif
-
-/*
- * Macros to group OMAP into cpu classes.
- * These can be used in most places.
- * cpu_is_omap7xx():	True for OMAP730
- * cpu_is_omap15xx():	True for OMAP1510, OMAP5910 and OMAP310
- * cpu_is_omap16xx():	True for OMAP1610, OMAP5912 and OMAP1710
- * cpu_is_omap24xx():	True for OMAP2420, OMAP2422, OMAP2423, OMAP2430
- * cpu_is_omap242x():	True for OMAP2420, OMAP2422, OMAP2423
- * cpu_is_omap243x():	True for OMAP2430
- * cpu_is_omap343x():	True for OMAP3430
- */
-#define GET_OMAP_CLASS	((system_rev >> 24) & 0xff)
-
-#define IS_OMAP_CLASS(class, id)			\
-static inline int is_omap ##class (void)		\
-{							\
-	return (GET_OMAP_CLASS == (id)) ? 1 : 0;	\
-}
-
-#define GET_OMAP_SUBCLASS	((system_rev >> 20) & 0x0fff)
-
-#define IS_OMAP_SUBCLASS(subclass, id)			\
-static inline int is_omap ##subclass (void)		\
-{							\
-	return (GET_OMAP_SUBCLASS == (id)) ? 1 : 0;	\
-}
-
-IS_OMAP_CLASS(7xx, 0x07)
-IS_OMAP_CLASS(15xx, 0x15)
-IS_OMAP_CLASS(16xx, 0x16)
-IS_OMAP_CLASS(24xx, 0x24)
-IS_OMAP_CLASS(34xx, 0x34)
-
-IS_OMAP_SUBCLASS(242x, 0x242)
-IS_OMAP_SUBCLASS(243x, 0x243)
-IS_OMAP_SUBCLASS(343x, 0x343)
-
-#define cpu_is_omap7xx()		0
-#define cpu_is_omap15xx()		0
-#define cpu_is_omap16xx()		0
-#define cpu_is_omap24xx()		0
-#define cpu_is_omap242x()		0
-#define cpu_is_omap243x()		0
-#define cpu_is_omap34xx()		0
-#define cpu_is_omap343x()		0
-
-#if defined(MULTI_OMAP1)
-# if defined(CONFIG_ARCH_OMAP730)
-#  undef  cpu_is_omap7xx
-#  define cpu_is_omap7xx()		is_omap7xx()
-# endif
-# if defined(CONFIG_ARCH_OMAP15XX)
-#  undef  cpu_is_omap15xx
-#  define cpu_is_omap15xx()		is_omap15xx()
-# endif
-# if defined(CONFIG_ARCH_OMAP16XX)
-#  undef  cpu_is_omap16xx
-#  define cpu_is_omap16xx()		is_omap16xx()
-# endif
-#else
-# if defined(CONFIG_ARCH_OMAP730)
-#  undef  cpu_is_omap7xx
-#  define cpu_is_omap7xx()		1
-# endif
-# if defined(CONFIG_ARCH_OMAP15XX)
-#  undef  cpu_is_omap15xx
-#  define cpu_is_omap15xx()		1
-# endif
-# if defined(CONFIG_ARCH_OMAP16XX)
-#  undef  cpu_is_omap16xx
-#  define cpu_is_omap16xx()		1
-# endif
-#endif
-
-#if defined(MULTI_OMAP2)
-# if defined(CONFIG_ARCH_OMAP24XX)
-#  undef  cpu_is_omap24xx
-#  undef  cpu_is_omap242x
-#  undef  cpu_is_omap243x
-#  define cpu_is_omap24xx()		is_omap24xx()
-#  define cpu_is_omap242x()		is_omap242x()
-#  define cpu_is_omap243x()		is_omap243x()
-# endif
-# if defined(CONFIG_ARCH_OMAP34XX)
-#  undef  cpu_is_omap34xx
-#  undef  cpu_is_omap343x
-#  define cpu_is_omap34xx()		is_omap34xx()
-#  define cpu_is_omap343x()		is_omap343x()
-# endif
-#else
-# if defined(CONFIG_ARCH_OMAP24XX)
-#  undef  cpu_is_omap24xx
-#  define cpu_is_omap24xx()		1
-# endif
-# if defined(CONFIG_ARCH_OMAP2420)
-#  undef  cpu_is_omap242x
-#  define cpu_is_omap242x()		1
-# endif
-# if defined(CONFIG_ARCH_OMAP2430)
-#  undef  cpu_is_omap243x
-#  define cpu_is_omap243x()		1
-# endif
-# if defined(CONFIG_ARCH_OMAP34XX)
-#  undef  cpu_is_omap34xx
-#  define cpu_is_omap34xx()		1
-# endif
-# if defined(CONFIG_ARCH_OMAP3430)
-#  undef  cpu_is_omap343x
-#  define cpu_is_omap343x()		1
-# endif
-#endif
-
-/*
- * Macros to detect individual cpu types.
- * These are only rarely needed.
- * cpu_is_omap330():	True for OMAP330
- * cpu_is_omap730():	True for OMAP730
- * cpu_is_omap1510():	True for OMAP1510
- * cpu_is_omap1610():	True for OMAP1610
- * cpu_is_omap1611():	True for OMAP1611
- * cpu_is_omap5912():	True for OMAP5912
- * cpu_is_omap1621():	True for OMAP1621
- * cpu_is_omap1710():	True for OMAP1710
- * cpu_is_omap2420():	True for OMAP2420
- * cpu_is_omap2422():	True for OMAP2422
- * cpu_is_omap2423():	True for OMAP2423
- * cpu_is_omap2430():	True for OMAP2430
- * cpu_is_omap3430():	True for OMAP3430
- */
-#define GET_OMAP_TYPE	((system_rev >> 16) & 0xffff)
-
-#define IS_OMAP_TYPE(type, id)				\
-static inline int is_omap ##type (void)			\
-{							\
-	return (GET_OMAP_TYPE == (id)) ? 1 : 0;		\
-}
-
-IS_OMAP_TYPE(310, 0x0310)
-IS_OMAP_TYPE(730, 0x0730)
-IS_OMAP_TYPE(1510, 0x1510)
-IS_OMAP_TYPE(1610, 0x1610)
-IS_OMAP_TYPE(1611, 0x1611)
-IS_OMAP_TYPE(5912, 0x1611)
-IS_OMAP_TYPE(1621, 0x1621)
-IS_OMAP_TYPE(1710, 0x1710)
-IS_OMAP_TYPE(2420, 0x2420)
-IS_OMAP_TYPE(2422, 0x2422)
-IS_OMAP_TYPE(2423, 0x2423)
-IS_OMAP_TYPE(2430, 0x2430)
-IS_OMAP_TYPE(3430, 0x3430)
-
-#define cpu_is_omap310()		0
-#define cpu_is_omap730()		0
-#define cpu_is_omap1510()		0
-#define cpu_is_omap1610()		0
-#define cpu_is_omap5912()		0
-#define cpu_is_omap1611()		0
-#define cpu_is_omap1621()		0
-#define cpu_is_omap1710()		0
-#define cpu_is_omap2420()		0
-#define cpu_is_omap2422()		0
-#define cpu_is_omap2423()		0
-#define cpu_is_omap2430()		0
-#define cpu_is_omap3430()		0
-
-#if defined(MULTI_OMAP1)
-# if defined(CONFIG_ARCH_OMAP730)
-#  undef  cpu_is_omap730
-#  define cpu_is_omap730()		is_omap730()
-# endif
-#else
-# if defined(CONFIG_ARCH_OMAP730)
-#  undef  cpu_is_omap730
-#  define cpu_is_omap730()		1
-# endif
-#endif
-
-/*
- * Whether we have MULTI_OMAP1 or not, we still need to distinguish
- * between 330 vs. 1510 and 1611B/5912 vs. 1710.
- */
-#if defined(CONFIG_ARCH_OMAP15XX)
-# undef  cpu_is_omap310
-# undef  cpu_is_omap1510
-# define cpu_is_omap310()		is_omap310()
-# define cpu_is_omap1510()		is_omap1510()
-#endif
-
-#if defined(CONFIG_ARCH_OMAP16XX)
-# undef  cpu_is_omap1610
-# undef  cpu_is_omap1611
-# undef  cpu_is_omap5912
-# undef  cpu_is_omap1621
-# undef  cpu_is_omap1710
-# define cpu_is_omap1610()		is_omap1610()
-# define cpu_is_omap1611()		is_omap1611()
-# define cpu_is_omap5912()		is_omap5912()
-# define cpu_is_omap1621()		is_omap1621()
-# define cpu_is_omap1710()		is_omap1710()
-#endif
-
-#if defined(CONFIG_ARCH_OMAP24XX)
-# undef  cpu_is_omap2420
-# undef  cpu_is_omap2422
-# undef  cpu_is_omap2423
-# undef  cpu_is_omap2430
-# define cpu_is_omap2420()		is_omap2420()
-# define cpu_is_omap2422()		is_omap2422()
-# define cpu_is_omap2423()		is_omap2423()
-# define cpu_is_omap2430()		is_omap2430()
-#endif
-
-#if defined(CONFIG_ARCH_OMAP34XX)
-# undef cpu_is_omap3430
-# define cpu_is_omap3430()		is_omap3430()
-#endif
-
-/* Macros to detect if we have OMAP1 or OMAP2 */
-#define cpu_class_is_omap1()	(cpu_is_omap730() || cpu_is_omap15xx() || \
-				cpu_is_omap16xx())
-#define cpu_class_is_omap2()	(cpu_is_omap24xx() || cpu_is_omap34xx())
-
-#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
-/*
- * Macros to detect silicon revision of OMAP2/3 processors.
- * is_sil_rev_greater_than:	true if passed cpu type & its rev is greater.
- * is_sil_rev_lesser_than:	true if passed cpu type & its rev is lesser.
- * is_sil_rev_equal_to:		true if passed cpu type & its rev is equal.
- * get_sil_rev:			return the silicon rev value.
- */
-#define get_sil_omap_type(rev)	((rev & 0xffff0000) >> 16)
-#define get_sil_revision(rev)	((rev & 0x0000f000) >> 12)
-
-#define is_sil_rev_greater_than(rev) \
-		((get_sil_omap_type(system_rev) == get_sil_omap_type(rev)) && \
-		(get_sil_revision(system_rev) > get_sil_revision(rev)))
-
-#define is_sil_rev_less_than(rev) \
-		((get_sil_omap_type(system_rev) == get_sil_omap_type(rev)) && \
-		(get_sil_revision(system_rev) < get_sil_revision(rev)))
-
-#define is_sil_rev_equal_to(rev) \
-		((get_sil_omap_type(system_rev) == get_sil_omap_type(rev)) && \
-		(get_sil_revision(system_rev) == get_sil_revision(rev)))
-
-#define get_sil_rev() \
-		get_sil_revision(system_rev)
-
-/* Various silicon macros defined here */
-#define OMAP2420_REV_ES1_0	0x24200000
-#define OMAP2420_REV_ES2_0	0x24201000
-#define OMAP2430_REV_ES1_0	0x24300000
-#define OMAP3430_REV_ES1_0	0x34300000
-#define OMAP3430_REV_ES2_0	0x34301000
-#define OMAP3430_REV_ES2_1	0x34302000
-#define OMAP3430_REV_ES2_2	0x34303000
-
-/*
- * omap_chip bits
- *
- * CHIP_IS_OMAP{2420,2430,3430} indicate that a particular structure is
- * valid on all chips of that type.  CHIP_IS_OMAP3430ES{1,2} indicates
- * something that is only valid on that particular ES revision.
- *
- * These bits may be ORed together to indicate structures that are
- * available on multiple chip types.
- *
- * To test whether a particular structure matches the current OMAP chip type,
- * use omap_chip_is().
- *
- */
-#define CHIP_IS_OMAP2420       (1 << 0)
-#define CHIP_IS_OMAP2430       (1 << 1)
-#define CHIP_IS_OMAP3430       (1 << 2)
-#define CHIP_IS_OMAP3430ES1    (1 << 3)
-#define CHIP_IS_OMAP3430ES2    (1 << 4)
-
-#define CHIP_IS_OMAP24XX       (CHIP_IS_OMAP2420 | CHIP_IS_OMAP2430)
-
-int omap_chip_is(struct omap_chip_id oci);
-
-
-/*
- * Macro to detect device type i.e. EMU/HS/TST/GP/BAD
- */
-#define DEVICE_TYPE_TEST	0
-#define DEVICE_TYPE_EMU		1
-#define DEVICE_TYPE_SEC		2
-#define DEVICE_TYPE_GP		3
-#define DEVICE_TYPE_BAD		4
-
-#define get_device_type()	((system_rev & 0x700) >> 8)
-#define is_device_type_test()	(get_device_type() == DEVICE_TYPE_TEST)
-#define is_device_type_emu()	(get_device_type() == DEVICE_TYPE_EMU)
-#define is_device_type_sec()	(get_device_type() == DEVICE_TYPE_SEC)
-#define is_device_type_gp()	(get_device_type() == DEVICE_TYPE_GP)
-#define is_device_type_bad()	(get_device_type() == DEVICE_TYPE_BAD)
-
-void omap2_check_revision(void);
-
-#endif    /* defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) */
-
-#endif
diff --git a/include/asm-arm/arch-omap/debug-macro.S b/include/asm-arm/arch-omap/debug-macro.S
deleted file mode 100644
index ca4f577f9675..000000000000
--- a/include/asm-arm/arch-omap/debug-macro.S
+++ /dev/null
@@ -1,58 +0,0 @@
-/* linux/include/asm-arm/arch-omap/debug-macro.S
- *
- * Debugging macro include header
- *
- *  Copyright (C) 1994-1999 Russell King
- *  Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
-*/
-
-		.macro	addruart,rx
-		mrc	p15, 0, \rx, c1, c0
-		tst	\rx, #1			@ MMU enabled?
-#ifdef CONFIG_ARCH_OMAP1
-		moveq	\rx, #0xff000000	@ physical base address
-		movne	\rx, #0xfe000000	@ virtual base
-		orr	\rx, \rx, #0x00fb0000
-#ifdef CONFIG_OMAP_LL_DEBUG_UART3
-		orr	\rx, \rx, #0x00009000	@ UART 3
-#endif
-#if defined(CONFIG_OMAP_LL_DEBUG_UART2) || defined(CONFIG_OMAP_LL_DEBUG_UART3)
-		orr	\rx, \rx, #0x00000800	@ UART 2 & 3
-#endif
-
-#elif  CONFIG_ARCH_OMAP2
-		moveq	\rx, #0x48000000	@ physical base address
-		movne	\rx, #0xd8000000	@ virtual base
-		orr	\rx, \rx, #0x0006a000
-#ifdef CONFIG_OMAP_LL_DEBUG_UART2
-		add	\rx, \rx, #0x00002000	@ UART 2
-#endif
-#ifdef CONFIG_OMAP_LL_DEBUG_UART3
-		add	\rx, \rx, #0x00004000	@ UART 3
-#endif
-#endif
-		.endm
-
-		.macro	senduart,rd,rx
-		strb	\rd, [\rx]
-		.endm
-
-		.macro	busyuart,rd,rx
-1001:		ldrb	\rd, [\rx, #(0x5 << 2)]	@ OMAP-1510 and friends
-		and	\rd, \rd, #0x60
-		teq	\rd, #0x60
-		beq	1002f
-		ldrb	\rd, [\rx, #(0x5 << 0)]	@ OMAP-730 only
-		and	\rd, \rd, #0x60
-		teq	\rd, #0x60
-		bne	1001b
-1002:
-		.endm
-
-		.macro	waituart,rd,rx
-		.endm
diff --git a/include/asm-arm/arch-omap/dma.h b/include/asm-arm/arch-omap/dma.h
deleted file mode 100644
index f4dcb9587869..000000000000
--- a/include/asm-arm/arch-omap/dma.h
+++ /dev/null
@@ -1,570 +0,0 @@
-/*
- *  linux/include/asm-arm/arch-omap/dma.h
- *
- *  Copyright (C) 2003 Nokia Corporation
- *  Author: Juha Yrjölä <juha.yrjola@nokia.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-#ifndef __ASM_ARCH_DMA_H
-#define __ASM_ARCH_DMA_H
-
-/* Hardware registers for omap1 */
-#define OMAP1_DMA_BASE			(0xfffed800)
-
-#define OMAP1_DMA_GCR			0x400
-#define OMAP1_DMA_GSCR			0x404
-#define OMAP1_DMA_GRST			0x408
-#define OMAP1_DMA_HW_ID			0x442
-#define OMAP1_DMA_PCH2_ID		0x444
-#define OMAP1_DMA_PCH0_ID		0x446
-#define OMAP1_DMA_PCH1_ID		0x448
-#define OMAP1_DMA_PCHG_ID		0x44a
-#define OMAP1_DMA_PCHD_ID		0x44c
-#define OMAP1_DMA_CAPS_0_U		0x44e
-#define OMAP1_DMA_CAPS_0_L		0x450
-#define OMAP1_DMA_CAPS_1_U		0x452
-#define OMAP1_DMA_CAPS_1_L		0x454
-#define OMAP1_DMA_CAPS_2		0x456
-#define OMAP1_DMA_CAPS_3		0x458
-#define OMAP1_DMA_CAPS_4		0x45a
-#define OMAP1_DMA_PCH2_SR		0x460
-#define OMAP1_DMA_PCH0_SR		0x480
-#define OMAP1_DMA_PCH1_SR		0x482
-#define OMAP1_DMA_PCHD_SR		0x4c0
-
-/* Hardware registers for omap2 and omap3 */
-#define OMAP24XX_DMA4_BASE		(L4_24XX_BASE + 0x56000)
-#define OMAP34XX_DMA4_BASE		(L4_34XX_BASE + 0x56000)
-
-#define OMAP_DMA4_REVISION		0x00
-#define OMAP_DMA4_GCR			0x78
-#define OMAP_DMA4_IRQSTATUS_L0		0x08
-#define OMAP_DMA4_IRQSTATUS_L1		0x0c
-#define OMAP_DMA4_IRQSTATUS_L2		0x10
-#define OMAP_DMA4_IRQSTATUS_L3		0x14
-#define OMAP_DMA4_IRQENABLE_L0		0x18
-#define OMAP_DMA4_IRQENABLE_L1		0x1c
-#define OMAP_DMA4_IRQENABLE_L2		0x20
-#define OMAP_DMA4_IRQENABLE_L3		0x24
-#define OMAP_DMA4_SYSSTATUS		0x28
-#define OMAP_DMA4_OCP_SYSCONFIG		0x2c
-#define OMAP_DMA4_CAPS_0		0x64
-#define OMAP_DMA4_CAPS_2		0x6c
-#define OMAP_DMA4_CAPS_3		0x70
-#define OMAP_DMA4_CAPS_4		0x74
-
-#define OMAP1_LOGICAL_DMA_CH_COUNT	17
-#define OMAP_DMA4_LOGICAL_DMA_CH_COUNT	32	/* REVISIT: Is this 32 + 2? */
-
-/* Common channel specific registers for omap1 */
-#define OMAP1_DMA_CH_BASE(n)		(0x40 * (n) + 0x00)
-#define OMAP1_DMA_CSDP(n)		(0x40 * (n) + 0x00)
-#define OMAP1_DMA_CCR(n)		(0x40 * (n) + 0x02)
-#define OMAP1_DMA_CICR(n)		(0x40 * (n) + 0x04)
-#define OMAP1_DMA_CSR(n)		(0x40 * (n) + 0x06)
-#define OMAP1_DMA_CEN(n)		(0x40 * (n) + 0x10)
-#define OMAP1_DMA_CFN(n)		(0x40 * (n) + 0x12)
-#define OMAP1_DMA_CSFI(n)		(0x40 * (n) + 0x14)
-#define OMAP1_DMA_CSEI(n)		(0x40 * (n) + 0x16)
-#define OMAP1_DMA_CPC(n)		(0x40 * (n) + 0x18)	/* 15xx only */
-#define OMAP1_DMA_CSAC(n)		(0x40 * (n) + 0x18)
-#define OMAP1_DMA_CDAC(n)		(0x40 * (n) + 0x1a)
-#define OMAP1_DMA_CDEI(n)		(0x40 * (n) + 0x1c)
-#define OMAP1_DMA_CDFI(n)		(0x40 * (n) + 0x1e)
-#define OMAP1_DMA_CLNK_CTRL(n)		(0x40 * (n) + 0x28)
-
-/* Common channel specific registers for omap2 */
-#define OMAP_DMA4_CH_BASE(n)		(0x60 * (n) + 0x80)
-#define OMAP_DMA4_CCR(n)		(0x60 * (n) + 0x80)
-#define OMAP_DMA4_CLNK_CTRL(n)		(0x60 * (n) + 0x84)
-#define OMAP_DMA4_CICR(n)		(0x60 * (n) + 0x88)
-#define OMAP_DMA4_CSR(n)		(0x60 * (n) + 0x8c)
-#define OMAP_DMA4_CSDP(n)		(0x60 * (n) + 0x90)
-#define OMAP_DMA4_CEN(n)		(0x60 * (n) + 0x94)
-#define OMAP_DMA4_CFN(n)		(0x60 * (n) + 0x98)
-#define OMAP_DMA4_CSEI(n)		(0x60 * (n) + 0xa4)
-#define OMAP_DMA4_CSFI(n)		(0x60 * (n) + 0xa8)
-#define OMAP_DMA4_CDEI(n)		(0x60 * (n) + 0xac)
-#define OMAP_DMA4_CDFI(n)		(0x60 * (n) + 0xb0)
-#define OMAP_DMA4_CSAC(n)		(0x60 * (n) + 0xb4)
-#define OMAP_DMA4_CDAC(n)		(0x60 * (n) + 0xb8)
-
-/* Channel specific registers only on omap1 */
-#define OMAP1_DMA_CSSA_L(n)		(0x40 * (n) + 0x08)
-#define OMAP1_DMA_CSSA_U(n)		(0x40 * (n) + 0x0a)
-#define OMAP1_DMA_CDSA_L(n)		(0x40 * (n) + 0x0c)
-#define OMAP1_DMA_CDSA_U(n)		(0x40 * (n) + 0x0e)
-#define OMAP1_DMA_COLOR_L(n)		(0x40 * (n) + 0x20)
-#define OMAP1_DMA_COLOR_U(n)		(0x40 * (n) + 0x22)
-#define OMAP1_DMA_CCR2(n)		(0x40 * (n) + 0x24)
-#define OMAP1_DMA_LCH_CTRL(n)		(0x40 * (n) + 0x2a)	/* not on 15xx */
-#define OMAP1_DMA_CCEN(n)		0
-#define OMAP1_DMA_CCFN(n)		0
-
-/* Channel specific registers only on omap2 */
-#define OMAP_DMA4_CSSA(n)		(0x60 * (n) + 0x9c)
-#define OMAP_DMA4_CDSA(n)		(0x60 * (n) + 0xa0)
-#define OMAP_DMA4_CCEN(n)		(0x60 * (n) + 0xbc)
-#define OMAP_DMA4_CCFN(n)		(0x60 * (n) + 0xc0)
-#define OMAP_DMA4_COLOR(n)		(0x60 * (n) + 0xc4)
-
-/* Dummy defines to keep multi-omap compiles happy */
-#define OMAP1_DMA_REVISION		0
-#define OMAP1_DMA_IRQSTATUS_L0		0
-#define OMAP1_DMA_IRQENABLE_L0		0
-#define OMAP1_DMA_OCP_SYSCONFIG		0
-#define OMAP_DMA4_HW_ID			0
-#define OMAP_DMA4_CAPS_0_L		0
-#define OMAP_DMA4_CAPS_0_U		0
-#define OMAP_DMA4_CAPS_1_L		0
-#define OMAP_DMA4_CAPS_1_U		0
-#define OMAP_DMA4_GSCR			0
-#define OMAP_DMA4_CPC(n)		0
-
-#define OMAP_DMA4_LCH_CTRL(n)		0
-#define OMAP_DMA4_COLOR_L(n)		0
-#define OMAP_DMA4_COLOR_U(n)		0
-#define OMAP_DMA4_CCR2(n)		0
-#define OMAP1_DMA_CSSA(n)		0
-#define OMAP1_DMA_CDSA(n)		0
-#define OMAP_DMA4_CSSA_L(n)		0
-#define OMAP_DMA4_CSSA_U(n)		0
-#define OMAP_DMA4_CDSA_L(n)		0
-#define OMAP_DMA4_CDSA_U(n)		0
-
-/*----------------------------------------------------------------------------*/
-
-/* DMA channels for omap1 */
-#define OMAP_DMA_NO_DEVICE		0
-#define OMAP_DMA_MCSI1_TX		1
-#define OMAP_DMA_MCSI1_RX		2
-#define OMAP_DMA_I2C_RX			3
-#define OMAP_DMA_I2C_TX			4
-#define OMAP_DMA_EXT_NDMA_REQ		5
-#define OMAP_DMA_EXT_NDMA_REQ2		6
-#define OMAP_DMA_UWIRE_TX		7
-#define OMAP_DMA_MCBSP1_TX		8
-#define OMAP_DMA_MCBSP1_RX		9
-#define OMAP_DMA_MCBSP3_TX		10
-#define OMAP_DMA_MCBSP3_RX		11
-#define OMAP_DMA_UART1_TX		12
-#define OMAP_DMA_UART1_RX		13
-#define OMAP_DMA_UART2_TX		14
-#define OMAP_DMA_UART2_RX		15
-#define OMAP_DMA_MCBSP2_TX		16
-#define OMAP_DMA_MCBSP2_RX		17
-#define OMAP_DMA_UART3_TX		18
-#define OMAP_DMA_UART3_RX		19
-#define OMAP_DMA_CAMERA_IF_RX		20
-#define OMAP_DMA_MMC_TX			21
-#define OMAP_DMA_MMC_RX			22
-#define OMAP_DMA_NAND			23
-#define OMAP_DMA_IRQ_LCD_LINE		24
-#define OMAP_DMA_MEMORY_STICK		25
-#define OMAP_DMA_USB_W2FC_RX0		26
-#define OMAP_DMA_USB_W2FC_RX1		27
-#define OMAP_DMA_USB_W2FC_RX2		28
-#define OMAP_DMA_USB_W2FC_TX0		29
-#define OMAP_DMA_USB_W2FC_TX1		30
-#define OMAP_DMA_USB_W2FC_TX2		31
-
-/* These are only for 1610 */
-#define OMAP_DMA_CRYPTO_DES_IN		32
-#define OMAP_DMA_SPI_TX			33
-#define OMAP_DMA_SPI_RX			34
-#define OMAP_DMA_CRYPTO_HASH		35
-#define OMAP_DMA_CCP_ATTN		36
-#define OMAP_DMA_CCP_FIFO_NOT_EMPTY	37
-#define OMAP_DMA_CMT_APE_TX_CHAN_0	38
-#define OMAP_DMA_CMT_APE_RV_CHAN_0	39
-#define OMAP_DMA_CMT_APE_TX_CHAN_1	40
-#define OMAP_DMA_CMT_APE_RV_CHAN_1	41
-#define OMAP_DMA_CMT_APE_TX_CHAN_2	42
-#define OMAP_DMA_CMT_APE_RV_CHAN_2	43
-#define OMAP_DMA_CMT_APE_TX_CHAN_3	44
-#define OMAP_DMA_CMT_APE_RV_CHAN_3	45
-#define OMAP_DMA_CMT_APE_TX_CHAN_4	46
-#define OMAP_DMA_CMT_APE_RV_CHAN_4	47
-#define OMAP_DMA_CMT_APE_TX_CHAN_5	48
-#define OMAP_DMA_CMT_APE_RV_CHAN_5	49
-#define OMAP_DMA_CMT_APE_TX_CHAN_6	50
-#define OMAP_DMA_CMT_APE_RV_CHAN_6	51
-#define OMAP_DMA_CMT_APE_TX_CHAN_7	52
-#define OMAP_DMA_CMT_APE_RV_CHAN_7	53
-#define OMAP_DMA_MMC2_TX		54
-#define OMAP_DMA_MMC2_RX		55
-#define OMAP_DMA_CRYPTO_DES_OUT		56
-
-/* DMA channels for 24xx */
-#define OMAP24XX_DMA_NO_DEVICE		0
-#define OMAP24XX_DMA_XTI_DMA		1	/* S_DMA_0 */
-#define OMAP24XX_DMA_EXT_DMAREQ0	2	/* S_DMA_1 */
-#define OMAP24XX_DMA_EXT_DMAREQ1	3	/* S_DMA_2 */
-#define OMAP24XX_DMA_GPMC		4	/* S_DMA_3 */
-#define OMAP24XX_DMA_GFX		5	/* S_DMA_4 */
-#define OMAP24XX_DMA_DSS		6	/* S_DMA_5 */
-#define OMAP242X_DMA_VLYNQ_TX		7	/* S_DMA_6 */
-#define OMAP24XX_DMA_EXT_DMAREQ2	7	/* S_DMA_6 */
-#define OMAP24XX_DMA_CWT		8	/* S_DMA_7 */
-#define OMAP24XX_DMA_AES_TX		9	/* S_DMA_8 */
-#define OMAP24XX_DMA_AES_RX		10	/* S_DMA_9 */
-#define OMAP24XX_DMA_DES_TX		11	/* S_DMA_10 */
-#define OMAP24XX_DMA_DES_RX		12	/* S_DMA_11 */
-#define OMAP24XX_DMA_SHA1MD5_RX		13	/* S_DMA_12 */
-#define OMAP34XX_DMA_SHA2MD5_RX		13	/* S_DMA_12 */
-#define OMAP242X_DMA_EXT_DMAREQ2	14	/* S_DMA_13 */
-#define OMAP242X_DMA_EXT_DMAREQ3	15	/* S_DMA_14 */
-#define OMAP242X_DMA_EXT_DMAREQ4	16	/* S_DMA_15 */
-#define OMAP242X_DMA_EAC_AC_RD		17	/* S_DMA_16 */
-#define OMAP242X_DMA_EAC_AC_WR		18	/* S_DMA_17 */
-#define OMAP242X_DMA_EAC_MD_UL_RD	19	/* S_DMA_18 */
-#define OMAP242X_DMA_EAC_MD_UL_WR	20	/* S_DMA_19 */
-#define OMAP242X_DMA_EAC_MD_DL_RD	21	/* S_DMA_20 */
-#define OMAP242X_DMA_EAC_MD_DL_WR	22	/* S_DMA_21 */
-#define OMAP242X_DMA_EAC_BT_UL_RD	23	/* S_DMA_22 */
-#define OMAP242X_DMA_EAC_BT_UL_WR	24	/* S_DMA_23 */
-#define OMAP242X_DMA_EAC_BT_DL_RD	25	/* S_DMA_24 */
-#define OMAP242X_DMA_EAC_BT_DL_WR	26	/* S_DMA_25 */
-#define OMAP243X_DMA_EXT_DMAREQ3	14	/* S_DMA_13 */
-#define OMAP24XX_DMA_SPI3_TX0		15	/* S_DMA_14 */
-#define OMAP24XX_DMA_SPI3_RX0		16	/* S_DMA_15 */
-#define OMAP24XX_DMA_MCBSP3_TX		17	/* S_DMA_16 */
-#define OMAP24XX_DMA_MCBSP3_RX		18	/* S_DMA_17 */
-#define OMAP24XX_DMA_MCBSP4_TX		19	/* S_DMA_18 */
-#define OMAP24XX_DMA_MCBSP4_RX		20	/* S_DMA_19 */
-#define OMAP24XX_DMA_MCBSP5_TX		21	/* S_DMA_20 */
-#define OMAP24XX_DMA_MCBSP5_RX		22	/* S_DMA_21 */
-#define OMAP24XX_DMA_SPI3_TX1		23	/* S_DMA_22 */
-#define OMAP24XX_DMA_SPI3_RX1		24	/* S_DMA_23 */
-#define OMAP243X_DMA_EXT_DMAREQ4	25	/* S_DMA_24 */
-#define OMAP243X_DMA_EXT_DMAREQ5	26	/* S_DMA_25 */
-#define OMAP34XX_DMA_I2C3_TX		25	/* S_DMA_24 */
-#define OMAP34XX_DMA_I2C3_RX		26	/* S_DMA_25 */
-#define OMAP24XX_DMA_I2C1_TX		27	/* S_DMA_26 */
-#define OMAP24XX_DMA_I2C1_RX		28	/* S_DMA_27 */
-#define OMAP24XX_DMA_I2C2_TX		29	/* S_DMA_28 */
-#define OMAP24XX_DMA_I2C2_RX		30	/* S_DMA_29 */
-#define OMAP24XX_DMA_MCBSP1_TX		31	/* S_DMA_30 */
-#define OMAP24XX_DMA_MCBSP1_RX		32	/* S_DMA_31 */
-#define OMAP24XX_DMA_MCBSP2_TX		33	/* S_DMA_32 */
-#define OMAP24XX_DMA_MCBSP2_RX		34	/* S_DMA_33 */
-#define OMAP24XX_DMA_SPI1_TX0		35	/* S_DMA_34 */
-#define OMAP24XX_DMA_SPI1_RX0		36	/* S_DMA_35 */
-#define OMAP24XX_DMA_SPI1_TX1		37	/* S_DMA_36 */
-#define OMAP24XX_DMA_SPI1_RX1		38	/* S_DMA_37 */
-#define OMAP24XX_DMA_SPI1_TX2		39	/* S_DMA_38 */
-#define OMAP24XX_DMA_SPI1_RX2		40	/* S_DMA_39 */
-#define OMAP24XX_DMA_SPI1_TX3		41	/* S_DMA_40 */
-#define OMAP24XX_DMA_SPI1_RX3		42	/* S_DMA_41 */
-#define OMAP24XX_DMA_SPI2_TX0		43	/* S_DMA_42 */
-#define OMAP24XX_DMA_SPI2_RX0		44	/* S_DMA_43 */
-#define OMAP24XX_DMA_SPI2_TX1		45	/* S_DMA_44 */
-#define OMAP24XX_DMA_SPI2_RX1		46	/* S_DMA_45 */
-#define OMAP24XX_DMA_MMC2_TX		47	/* S_DMA_46 */
-#define OMAP24XX_DMA_MMC2_RX		48	/* S_DMA_47 */
-#define OMAP24XX_DMA_UART1_TX		49	/* S_DMA_48 */
-#define OMAP24XX_DMA_UART1_RX		50	/* S_DMA_49 */
-#define OMAP24XX_DMA_UART2_TX		51	/* S_DMA_50 */
-#define OMAP24XX_DMA_UART2_RX		52	/* S_DMA_51 */
-#define OMAP24XX_DMA_UART3_TX		53	/* S_DMA_52 */
-#define OMAP24XX_DMA_UART3_RX		54	/* S_DMA_53 */
-#define OMAP24XX_DMA_USB_W2FC_TX0	55	/* S_DMA_54 */
-#define OMAP24XX_DMA_USB_W2FC_RX0	56	/* S_DMA_55 */
-#define OMAP24XX_DMA_USB_W2FC_TX1	57	/* S_DMA_56 */
-#define OMAP24XX_DMA_USB_W2FC_RX1	58	/* S_DMA_57 */
-#define OMAP24XX_DMA_USB_W2FC_TX2	59	/* S_DMA_58 */
-#define OMAP24XX_DMA_USB_W2FC_RX2	60	/* S_DMA_59 */
-#define OMAP24XX_DMA_MMC1_TX		61	/* S_DMA_60 */
-#define OMAP24XX_DMA_MMC1_RX		62	/* S_DMA_61 */
-#define OMAP24XX_DMA_MS			63	/* S_DMA_62 */
-#define OMAP242X_DMA_EXT_DMAREQ5	64	/* S_DMA_63 */
-#define OMAP243X_DMA_EXT_DMAREQ6	64	/* S_DMA_63 */
-#define OMAP34XX_DMA_EXT_DMAREQ3	64	/* S_DMA_63 */
-#define OMAP34XX_DMA_AES2_TX		65	/* S_DMA_64 */
-#define OMAP34XX_DMA_AES2_RX		66	/* S_DMA_65 */
-#define OMAP34XX_DMA_DES2_TX		67	/* S_DMA_66 */
-#define OMAP34XX_DMA_DES2_RX		68	/* S_DMA_67 */
-#define OMAP34XX_DMA_SHA1MD5_RX		69	/* S_DMA_68 */
-#define OMAP34XX_DMA_SPI4_TX0		70	/* S_DMA_69 */
-#define OMAP34XX_DMA_SPI4_RX0		71	/* S_DMA_70 */
-#define OMAP34XX_DSS_DMA0		72	/* S_DMA_71 */
-#define OMAP34XX_DSS_DMA1		73	/* S_DMA_72 */
-#define OMAP34XX_DSS_DMA2		74	/* S_DMA_73 */
-#define OMAP34XX_DSS_DMA3		75	/* S_DMA_74 */
-#define OMAP34XX_DMA_MMC3_TX		77	/* S_DMA_76 */
-#define OMAP34XX_DMA_MMC3_RX		78	/* S_DMA_77 */
-#define OMAP34XX_DMA_USIM_TX		79	/* S_DMA_78 */
-#define OMAP34XX_DMA_USIM_RX		80	/* S_DMA_79 */
-
-/*----------------------------------------------------------------------------*/
-
-/* Hardware registers for LCD DMA */
-#define OMAP1510_DMA_LCD_BASE		(0xfffedb00)
-#define OMAP1510_DMA_LCD_CTRL		(OMAP1510_DMA_LCD_BASE + 0x00)
-#define OMAP1510_DMA_LCD_TOP_F1_L	(OMAP1510_DMA_LCD_BASE + 0x02)
-#define OMAP1510_DMA_LCD_TOP_F1_U	(OMAP1510_DMA_LCD_BASE + 0x04)
-#define OMAP1510_DMA_LCD_BOT_F1_L	(OMAP1510_DMA_LCD_BASE + 0x06)
-#define OMAP1510_DMA_LCD_BOT_F1_U	(OMAP1510_DMA_LCD_BASE + 0x08)
-
-#define OMAP1610_DMA_LCD_BASE		(0xfffee300)
-#define OMAP1610_DMA_LCD_CSDP		(OMAP1610_DMA_LCD_BASE + 0xc0)
-#define OMAP1610_DMA_LCD_CCR		(OMAP1610_DMA_LCD_BASE + 0xc2)
-#define OMAP1610_DMA_LCD_CTRL		(OMAP1610_DMA_LCD_BASE + 0xc4)
-#define OMAP1610_DMA_LCD_TOP_B1_L	(OMAP1610_DMA_LCD_BASE + 0xc8)
-#define OMAP1610_DMA_LCD_TOP_B1_U	(OMAP1610_DMA_LCD_BASE + 0xca)
-#define OMAP1610_DMA_LCD_BOT_B1_L	(OMAP1610_DMA_LCD_BASE + 0xcc)
-#define OMAP1610_DMA_LCD_BOT_B1_U	(OMAP1610_DMA_LCD_BASE + 0xce)
-#define OMAP1610_DMA_LCD_TOP_B2_L	(OMAP1610_DMA_LCD_BASE + 0xd0)
-#define OMAP1610_DMA_LCD_TOP_B2_U	(OMAP1610_DMA_LCD_BASE + 0xd2)
-#define OMAP1610_DMA_LCD_BOT_B2_L	(OMAP1610_DMA_LCD_BASE + 0xd4)
-#define OMAP1610_DMA_LCD_BOT_B2_U	(OMAP1610_DMA_LCD_BASE + 0xd6)
-#define OMAP1610_DMA_LCD_SRC_EI_B1	(OMAP1610_DMA_LCD_BASE + 0xd8)
-#define OMAP1610_DMA_LCD_SRC_FI_B1_L	(OMAP1610_DMA_LCD_BASE + 0xda)
-#define OMAP1610_DMA_LCD_SRC_EN_B1	(OMAP1610_DMA_LCD_BASE + 0xe0)
-#define OMAP1610_DMA_LCD_SRC_FN_B1	(OMAP1610_DMA_LCD_BASE + 0xe4)
-#define OMAP1610_DMA_LCD_LCH_CTRL	(OMAP1610_DMA_LCD_BASE + 0xea)
-#define OMAP1610_DMA_LCD_SRC_FI_B1_U	(OMAP1610_DMA_LCD_BASE + 0xf4)
-
-#define OMAP1_DMA_TOUT_IRQ		(1 << 0)
-#define OMAP_DMA_DROP_IRQ		(1 << 1)
-#define OMAP_DMA_HALF_IRQ		(1 << 2)
-#define OMAP_DMA_FRAME_IRQ		(1 << 3)
-#define OMAP_DMA_LAST_IRQ		(1 << 4)
-#define OMAP_DMA_BLOCK_IRQ		(1 << 5)
-#define OMAP1_DMA_SYNC_IRQ		(1 << 6)
-#define OMAP2_DMA_PKT_IRQ		(1 << 7)
-#define OMAP2_DMA_TRANS_ERR_IRQ		(1 << 8)
-#define OMAP2_DMA_SECURE_ERR_IRQ	(1 << 9)
-#define OMAP2_DMA_SUPERVISOR_ERR_IRQ	(1 << 10)
-#define OMAP2_DMA_MISALIGNED_ERR_IRQ	(1 << 11)
-
-#define OMAP_DMA_DATA_TYPE_S8		0x00
-#define OMAP_DMA_DATA_TYPE_S16		0x01
-#define OMAP_DMA_DATA_TYPE_S32		0x02
-
-#define OMAP_DMA_SYNC_ELEMENT		0x00
-#define OMAP_DMA_SYNC_FRAME		0x01
-#define OMAP_DMA_SYNC_BLOCK		0x02
-#define OMAP_DMA_SYNC_PACKET		0x03
-
-#define OMAP_DMA_SRC_SYNC		0x01
-#define OMAP_DMA_DST_SYNC		0x00
-
-#define OMAP_DMA_PORT_EMIFF		0x00
-#define OMAP_DMA_PORT_EMIFS		0x01
-#define OMAP_DMA_PORT_OCP_T1		0x02
-#define OMAP_DMA_PORT_TIPB		0x03
-#define OMAP_DMA_PORT_OCP_T2		0x04
-#define OMAP_DMA_PORT_MPUI		0x05
-
-#define OMAP_DMA_AMODE_CONSTANT		0x00
-#define OMAP_DMA_AMODE_POST_INC		0x01
-#define OMAP_DMA_AMODE_SINGLE_IDX	0x02
-#define OMAP_DMA_AMODE_DOUBLE_IDX	0x03
-
-#define DMA_DEFAULT_FIFO_DEPTH		0x10
-#define DMA_DEFAULT_ARB_RATE		0x01
-/* Pass THREAD_RESERVE ORed with THREAD_FIFO for tparams */
-#define DMA_THREAD_RESERVE_NORM		(0x00 << 12) /* Def */
-#define DMA_THREAD_RESERVE_ONET		(0x01 << 12)
-#define DMA_THREAD_RESERVE_TWOT		(0x02 << 12)
-#define DMA_THREAD_RESERVE_THREET	(0x03 << 12)
-#define DMA_THREAD_FIFO_NONE		(0x00 << 14) /* Def */
-#define DMA_THREAD_FIFO_75		(0x01 << 14)
-#define DMA_THREAD_FIFO_25		(0x02 << 14)
-#define DMA_THREAD_FIFO_50		(0x03 << 14)
-
-/* Chaining modes*/
-#ifndef CONFIG_ARCH_OMAP1
-#define OMAP_DMA_STATIC_CHAIN		0x1
-#define OMAP_DMA_DYNAMIC_CHAIN		0x2
-#define OMAP_DMA_CHAIN_ACTIVE		0x1
-#define OMAP_DMA_CHAIN_INACTIVE		0x0
-#endif
-
-#define DMA_CH_PRIO_HIGH		0x1
-#define DMA_CH_PRIO_LOW			0x0 /* Def */
-
-/* LCD DMA block numbers */
-enum {
-	OMAP_LCD_DMA_B1_TOP,
-	OMAP_LCD_DMA_B1_BOTTOM,
-	OMAP_LCD_DMA_B2_TOP,
-	OMAP_LCD_DMA_B2_BOTTOM
-};
-
-enum omap_dma_burst_mode {
-	OMAP_DMA_DATA_BURST_DIS = 0,
-	OMAP_DMA_DATA_BURST_4,
-	OMAP_DMA_DATA_BURST_8,
-	OMAP_DMA_DATA_BURST_16,
-};
-
-enum end_type {
-	OMAP_DMA_LITTLE_ENDIAN = 0,
-	OMAP_DMA_BIG_ENDIAN
-};
-
-enum omap_dma_color_mode {
-	OMAP_DMA_COLOR_DIS = 0,
-	OMAP_DMA_CONSTANT_FILL,
-	OMAP_DMA_TRANSPARENT_COPY
-};
-
-enum omap_dma_write_mode {
-	OMAP_DMA_WRITE_NON_POSTED = 0,
-	OMAP_DMA_WRITE_POSTED,
-	OMAP_DMA_WRITE_LAST_NON_POSTED
-};
-
-enum omap_dma_channel_mode {
-	OMAP_DMA_LCH_2D = 0,
-	OMAP_DMA_LCH_G,
-	OMAP_DMA_LCH_P,
-	OMAP_DMA_LCH_PD
-};
-
-struct omap_dma_channel_params {
-	int data_type;		/* data type 8,16,32 */
-	int elem_count;		/* number of elements in a frame */
-	int frame_count;	/* number of frames in a element */
-
-	int src_port;		/* Only on OMAP1 REVISIT: Is this needed? */
-	int src_amode;		/* constant, post increment, indexed,
-					double indexed */
-	unsigned long src_start;	/* source address : physical */
-	int src_ei;		/* source element index */
-	int src_fi;		/* source frame index */
-
-	int dst_port;		/* Only on OMAP1 REVISIT: Is this needed? */
-	int dst_amode;		/* constant, post increment, indexed,
-					double indexed */
-	unsigned long dst_start;	/* source address : physical */
-	int dst_ei;		/* source element index */
-	int dst_fi;		/* source frame index */
-
-	int trigger;		/* trigger attached if the channel is
-					synchronized */
-	int sync_mode;		/* sycn on element, frame , block or packet */
-	int src_or_dst_synch;	/* source synch(1) or destination synch(0) */
-
-	int ie;			/* interrupt enabled */
-
-	unsigned char read_prio;/* read priority */
-	unsigned char write_prio;/* write priority */
-
-#ifndef CONFIG_ARCH_OMAP1
-	enum omap_dma_burst_mode burst_mode; /* Burst mode 4/8/16 words */
-#endif
-};
-
-
-extern void omap_set_dma_priority(int lch, int dst_port, int priority);
-extern int omap_request_dma(int dev_id, const char *dev_name,
-			void (*callback)(int lch, u16 ch_status, void *data),
-			void *data, int *dma_ch);
-extern void omap_enable_dma_irq(int ch, u16 irq_bits);
-extern void omap_disable_dma_irq(int ch, u16 irq_bits);
-extern void omap_free_dma(int ch);
-extern void omap_start_dma(int lch);
-extern void omap_stop_dma(int lch);
-extern void omap_set_dma_transfer_params(int lch, int data_type,
-					 int elem_count, int frame_count,
-					 int sync_mode,
-					 int dma_trigger, int src_or_dst_synch);
-extern void omap_set_dma_color_mode(int lch, enum omap_dma_color_mode mode,
-				    u32 color);
-extern void omap_set_dma_write_mode(int lch, enum omap_dma_write_mode mode);
-extern void omap_set_dma_channel_mode(int lch, enum omap_dma_channel_mode mode);
-
-extern void omap_set_dma_src_params(int lch, int src_port, int src_amode,
-				    unsigned long src_start,
-				    int src_ei, int src_fi);
-extern void omap_set_dma_src_index(int lch, int eidx, int fidx);
-extern void omap_set_dma_src_data_pack(int lch, int enable);
-extern void omap_set_dma_src_burst_mode(int lch,
-					enum omap_dma_burst_mode burst_mode);
-
-extern void omap_set_dma_dest_params(int lch, int dest_port, int dest_amode,
-				     unsigned long dest_start,
-				     int dst_ei, int dst_fi);
-extern void omap_set_dma_dest_index(int lch, int eidx, int fidx);
-extern void omap_set_dma_dest_data_pack(int lch, int enable);
-extern void omap_set_dma_dest_burst_mode(int lch,
-					 enum omap_dma_burst_mode burst_mode);
-
-extern void omap_set_dma_params(int lch,
-				struct omap_dma_channel_params *params);
-
-extern void omap_dma_link_lch(int lch_head, int lch_queue);
-extern void omap_dma_unlink_lch(int lch_head, int lch_queue);
-
-extern int omap_set_dma_callback(int lch,
-			void (*callback)(int lch, u16 ch_status, void *data),
-			void *data);
-extern dma_addr_t omap_get_dma_src_pos(int lch);
-extern dma_addr_t omap_get_dma_dst_pos(int lch);
-extern void omap_clear_dma(int lch);
-extern int omap_get_dma_active_status(int lch);
-extern int omap_dma_running(void);
-extern void omap_dma_set_global_params(int arb_rate, int max_fifo_depth,
-				       int tparams);
-extern int omap_dma_set_prio_lch(int lch, unsigned char read_prio,
-				 unsigned char write_prio);
-extern void omap_set_dma_dst_endian_type(int lch, enum end_type etype);
-extern void omap_set_dma_src_endian_type(int lch, enum end_type etype);
-extern int omap_get_dma_index(int lch, int *ei, int *fi);
-
-/* Chaining APIs */
-#ifndef CONFIG_ARCH_OMAP1
-extern int omap_request_dma_chain(int dev_id, const char *dev_name,
-				  void (*callback) (int chain_id, u16 ch_status,
-						    void *data),
-				  int *chain_id, int no_of_chans,
-				  int chain_mode,
-				  struct omap_dma_channel_params params);
-extern int omap_free_dma_chain(int chain_id);
-extern int omap_dma_chain_a_transfer(int chain_id, int src_start,
-				     int dest_start, int elem_count,
-				     int frame_count, void *callbk_data);
-extern int omap_start_dma_chain_transfers(int chain_id);
-extern int omap_stop_dma_chain_transfers(int chain_id);
-extern int omap_get_dma_chain_index(int chain_id, int *ei, int *fi);
-extern int omap_get_dma_chain_dst_pos(int chain_id);
-extern int omap_get_dma_chain_src_pos(int chain_id);
-
-extern int omap_modify_dma_chain_params(int chain_id,
-					struct omap_dma_channel_params params);
-extern int omap_dma_chain_status(int chain_id);
-#endif
-
-/* LCD DMA functions */
-extern int omap_request_lcd_dma(void (*callback)(u16 status, void *data),
-				void *data);
-extern void omap_free_lcd_dma(void);
-extern void omap_setup_lcd_dma(void);
-extern void omap_enable_lcd_dma(void);
-extern void omap_stop_lcd_dma(void);
-extern void omap_set_lcd_dma_ext_controller(int external);
-extern void omap_set_lcd_dma_single_transfer(int single);
-extern void omap_set_lcd_dma_b1(unsigned long addr, u16 fb_xres, u16 fb_yres,
-				int data_type);
-extern void omap_set_lcd_dma_b1_rotation(int rotate);
-extern void omap_set_lcd_dma_b1_vxres(unsigned long vxres);
-extern void omap_set_lcd_dma_b1_mirror(int mirror);
-extern void omap_set_lcd_dma_b1_scale(unsigned int xscale, unsigned int yscale);
-
-#endif /* __ASM_ARCH_DMA_H */
diff --git a/include/asm-arm/arch-omap/entry-macro.S b/include/asm-arm/arch-omap/entry-macro.S
deleted file mode 100644
index 369093a45fcf..000000000000
--- a/include/asm-arm/arch-omap/entry-macro.S
+++ /dev/null
@@ -1,89 +0,0 @@
-/*
- * include/asm-arm/arch-omap/entry-macro.S
- *
- * Low-level IRQ helper macros for OMAP-based platforms
- *
- * This file is licensed under  the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-#include <asm/hardware.h>
-#include <asm/arch/io.h>
-#include <asm/arch/irqs.h>
-
-#if defined(CONFIG_ARCH_OMAP1)
-
-#if defined(CONFIG_ARCH_OMAP730) && \
-	(defined(CONFIG_ARCH_OMAP15XX) || defined(CONFIG_ARCH_OMAP16XX))
-#error "FIXME: OMAP730 doesn't support multiple-OMAP"
-#elif defined(CONFIG_ARCH_OMAP730)
-#define INT_IH2_IRQ		INT_730_IH2_IRQ
-#elif defined(CONFIG_ARCH_OMAP15XX)
-#define INT_IH2_IRQ		INT_1510_IH2_IRQ
-#elif defined(CONFIG_ARCH_OMAP16XX)
-#define INT_IH2_IRQ		INT_1610_IH2_IRQ
-#else
-#warning "IH2 IRQ defaulted"
-#define INT_IH2_IRQ		INT_1510_IH2_IRQ
-#endif
-
- 		.macro	disable_fiq
-		.endm
-
-		.macro  get_irqnr_preamble, base, tmp
-		.endm
-
-		.macro  arch_ret_to_user, tmp1, tmp2
-		.endm
-
-		.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
-		ldr	\base, =IO_ADDRESS(OMAP_IH1_BASE)
-		ldr	\irqnr, [\base, #IRQ_ITR_REG_OFFSET]
-		ldr	\tmp, [\base, #IRQ_MIR_REG_OFFSET]
-		mov	\irqstat, #0xffffffff
-		bic	\tmp, \irqstat, \tmp
-		tst	\irqnr, \tmp
-		beq	1510f
-
-		ldr	\irqnr, [\base, #IRQ_SIR_FIQ_REG_OFFSET]
-		cmp	\irqnr, #0
-		ldreq	\irqnr, [\base, #IRQ_SIR_IRQ_REG_OFFSET]
-		cmpeq	\irqnr, #INT_IH2_IRQ
-		ldreq	\base, =IO_ADDRESS(OMAP_IH2_BASE)
-		ldreq	\irqnr, [\base, #IRQ_SIR_IRQ_REG_OFFSET]
-		addeqs	\irqnr, \irqnr, #32
-1510:
-		.endm
-
-#elif defined(CONFIG_ARCH_OMAP24XX)
-
-#include <asm/arch/omap24xx.h>
-
-		.macro	disable_fiq
-		.endm
-
-		.macro  get_irqnr_preamble, base, tmp
-		.endm
-
-		.macro  arch_ret_to_user, tmp1, tmp2
-		.endm
-
-		.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
-		ldr	\base, =OMAP2_VA_IC_BASE
-		ldr	\irqnr, [\base, #0x98] /* IRQ pending reg 1 */
-		cmp	\irqnr, #0x0
-		bne	2222f
-		ldr	\irqnr, [\base, #0xb8] /* IRQ pending reg 2 */
-		cmp	\irqnr, #0x0
-		bne	2222f
-		ldr	\irqnr, [\base, #0xd8] /* IRQ pending reg 3 */
-		cmp	\irqnr, #0x0
-2222:
-		ldrne	\irqnr, [\base, #IRQ_SIR_IRQ]
-
-		.endm
-
-		.macro	irq_prio_table
-		.endm
-
-#endif
diff --git a/include/asm-arm/arch-omap/gpio.h b/include/asm-arm/arch-omap/gpio.h
deleted file mode 100644
index 5ee6a49864c3..000000000000
--- a/include/asm-arm/arch-omap/gpio.h
+++ /dev/null
@@ -1,122 +0,0 @@
-/*
- * linux/include/asm-arm/arch-omap/gpio.h
- *
- * OMAP GPIO handling defines and functions
- *
- * Copyright (C) 2003-2005 Nokia Corporation
- *
- * Written by Juha Yrjölä <juha.yrjola@nokia.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- *
- */
-
-#ifndef __ASM_ARCH_OMAP_GPIO_H
-#define __ASM_ARCH_OMAP_GPIO_H
-
-#include <asm/arch/irqs.h>
-#include <asm/io.h>
-
-#define OMAP_MPUIO_BASE			(void __iomem *)0xfffb5000
-
-#ifdef CONFIG_ARCH_OMAP730
-#define OMAP_MPUIO_INPUT_LATCH		0x00
-#define OMAP_MPUIO_OUTPUT		0x02
-#define OMAP_MPUIO_IO_CNTL		0x04
-#define OMAP_MPUIO_KBR_LATCH		0x08
-#define OMAP_MPUIO_KBC			0x0a
-#define OMAP_MPUIO_GPIO_EVENT_MODE	0x0c
-#define OMAP_MPUIO_GPIO_INT_EDGE	0x0e
-#define OMAP_MPUIO_KBD_INT		0x10
-#define OMAP_MPUIO_GPIO_INT		0x12
-#define OMAP_MPUIO_KBD_MASKIT		0x14
-#define OMAP_MPUIO_GPIO_MASKIT		0x16
-#define OMAP_MPUIO_GPIO_DEBOUNCING	0x18
-#define OMAP_MPUIO_LATCH		0x1a
-#else
-#define OMAP_MPUIO_INPUT_LATCH		0x00
-#define OMAP_MPUIO_OUTPUT		0x04
-#define OMAP_MPUIO_IO_CNTL		0x08
-#define OMAP_MPUIO_KBR_LATCH		0x10
-#define OMAP_MPUIO_KBC			0x14
-#define OMAP_MPUIO_GPIO_EVENT_MODE	0x18
-#define OMAP_MPUIO_GPIO_INT_EDGE	0x1c
-#define OMAP_MPUIO_KBD_INT		0x20
-#define OMAP_MPUIO_GPIO_INT		0x24
-#define OMAP_MPUIO_KBD_MASKIT		0x28
-#define OMAP_MPUIO_GPIO_MASKIT		0x2c
-#define OMAP_MPUIO_GPIO_DEBOUNCING	0x30
-#define OMAP_MPUIO_LATCH		0x34
-#endif
-
-#define OMAP34XX_NR_GPIOS		6
-
-#define OMAP_MPUIO(nr)		(OMAP_MAX_GPIO_LINES + (nr))
-#define OMAP_GPIO_IS_MPUIO(nr)	((nr) >= OMAP_MAX_GPIO_LINES)
-
-#define OMAP_GPIO_IRQ(nr)	(OMAP_GPIO_IS_MPUIO(nr) ? \
-				 IH_MPUIO_BASE + ((nr) & 0x0f) : \
-				 IH_GPIO_BASE + (nr))
-
-extern int omap_gpio_init(void);	/* Call from board init only */
-extern int omap_request_gpio(int gpio);
-extern void omap_free_gpio(int gpio);
-extern void omap_set_gpio_direction(int gpio, int is_input);
-extern void omap_set_gpio_dataout(int gpio, int enable);
-extern int omap_get_gpio_datain(int gpio);
-extern void omap_set_gpio_debounce(int gpio, int enable);
-extern void omap_set_gpio_debounce_time(int gpio, int enable);
-
-/*-------------------------------------------------------------------------*/
-
-/* Wrappers for "new style" GPIO calls, using the new infrastructure
- * which lets us plug in FPGA, I2C, and other implementations.
- * *
- * The original OMAP-specfic calls should eventually be removed.
- */
-
-#include <linux/errno.h>
-#include <asm-generic/gpio.h>
-
-static inline int gpio_get_value(unsigned gpio)
-{
-	return __gpio_get_value(gpio);
-}
-
-static inline void gpio_set_value(unsigned gpio, int value)
-{
-	__gpio_set_value(gpio, value);
-}
-
-static inline int gpio_cansleep(unsigned gpio)
-{
-	return __gpio_cansleep(gpio);
-}
-
-static inline int gpio_to_irq(unsigned gpio)
-{
-	if (gpio < (OMAP_MAX_GPIO_LINES + 16))
-		return OMAP_GPIO_IRQ(gpio);
-	return -EINVAL;
-}
-
-static inline int irq_to_gpio(unsigned irq)
-{
-	if (cpu_class_is_omap1() && (irq < (IH_MPUIO_BASE + 16)))
-		return (irq - IH_MPUIO_BASE) + OMAP_MAX_GPIO_LINES;
-	return irq - IH_GPIO_BASE;
-}
-
-#endif
diff --git a/include/asm-arm/arch-omap/hardware.h b/include/asm-arm/arch-omap/hardware.h
deleted file mode 100644
index 45fdfccbd5d4..000000000000
--- a/include/asm-arm/arch-omap/hardware.h
+++ /dev/null
@@ -1,355 +0,0 @@
-/*
- * linux/include/asm-arm/arch-omap/hardware.h
- *
- * Hardware definitions for TI OMAP processors and boards
- *
- * NOTE: Please put device driver specific defines into a separate header
- *	 file for each driver.
- *
- * Copyright (C) 2001 RidgeRun, Inc.
- * Author: RidgeRun, Inc. Greg Lonnon <glonnon@ridgerun.com>
- *
- * Reorganized for Linux-2.6 by Tony Lindgren <tony@atomide.com>
- *                          and Dirk Behme <dirk.behme@de.bosch.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
- * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
- * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef __ASM_ARCH_OMAP_HARDWARE_H
-#define __ASM_ARCH_OMAP_HARDWARE_H
-
-#include <asm/sizes.h>
-#ifndef __ASSEMBLER__
-#include <asm/types.h>
-#include <asm/arch/cpu.h>
-#endif
-#include <asm/arch/serial.h>
-
-/*
- * ---------------------------------------------------------------------------
- * Common definitions for all OMAP processors
- * NOTE: Put all processor or board specific parts to the special header
- *	 files.
- * ---------------------------------------------------------------------------
- */
-
-/*
- * ----------------------------------------------------------------------------
- * Timers
- * ----------------------------------------------------------------------------
- */
-#define OMAP_MPU_TIMER1_BASE	(0xfffec500)
-#define OMAP_MPU_TIMER2_BASE	(0xfffec600)
-#define OMAP_MPU_TIMER3_BASE	(0xfffec700)
-#define MPU_TIMER_FREE		(1 << 6)
-#define MPU_TIMER_CLOCK_ENABLE	(1 << 5)
-#define MPU_TIMER_AR		(1 << 1)
-#define MPU_TIMER_ST		(1 << 0)
-
-/*
- * ----------------------------------------------------------------------------
- * Clocks
- * ----------------------------------------------------------------------------
- */
-#define CLKGEN_REG_BASE		(0xfffece00)
-#define ARM_CKCTL		(CLKGEN_REG_BASE + 0x0)
-#define ARM_IDLECT1		(CLKGEN_REG_BASE + 0x4)
-#define ARM_IDLECT2		(CLKGEN_REG_BASE + 0x8)
-#define ARM_EWUPCT		(CLKGEN_REG_BASE + 0xC)
-#define ARM_RSTCT1		(CLKGEN_REG_BASE + 0x10)
-#define ARM_RSTCT2		(CLKGEN_REG_BASE + 0x14)
-#define ARM_SYSST		(CLKGEN_REG_BASE + 0x18)
-#define ARM_IDLECT3		(CLKGEN_REG_BASE + 0x24)
-
-#define CK_RATEF		1
-#define CK_IDLEF		2
-#define CK_ENABLEF		4
-#define CK_SELECTF		8
-#define SETARM_IDLE_SHIFT
-
-/* DPLL control registers */
-#define DPLL_CTL		(0xfffecf00)
-
-/* DSP clock control. Must use __raw_readw() and __raw_writew() with these */
-#define DSP_CONFIG_REG_BASE     (0xe1008000)
-#define DSP_CKCTL		(DSP_CONFIG_REG_BASE + 0x0)
-#define DSP_IDLECT1		(DSP_CONFIG_REG_BASE + 0x4)
-#define DSP_IDLECT2		(DSP_CONFIG_REG_BASE + 0x8)
-#define DSP_RSTCT2		(DSP_CONFIG_REG_BASE + 0x14)
-
-/*
- * ---------------------------------------------------------------------------
- * UPLD
- * ---------------------------------------------------------------------------
- */
-#define ULPD_REG_BASE		(0xfffe0800)
-#define ULPD_IT_STATUS		(ULPD_REG_BASE + 0x14)
-#define ULPD_SETUP_ANALOG_CELL_3	(ULPD_REG_BASE + 0x24)
-#define ULPD_CLOCK_CTRL		(ULPD_REG_BASE + 0x30)
-#	define DIS_USB_PVCI_CLK		(1 << 5)	/* no USB/FAC synch */
-#	define USB_MCLK_EN		(1 << 4)	/* enable W4_USB_CLKO */
-#define ULPD_SOFT_REQ		(ULPD_REG_BASE + 0x34)
-#	define SOFT_UDC_REQ		(1 << 4)
-#	define SOFT_USB_CLK_REQ		(1 << 3)
-#	define SOFT_DPLL_REQ		(1 << 0)
-#define ULPD_DPLL_CTRL		(ULPD_REG_BASE + 0x3c)
-#define ULPD_STATUS_REQ		(ULPD_REG_BASE + 0x40)
-#define ULPD_APLL_CTRL		(ULPD_REG_BASE + 0x4c)
-#define ULPD_POWER_CTRL		(ULPD_REG_BASE + 0x50)
-#define ULPD_SOFT_DISABLE_REQ_REG	(ULPD_REG_BASE + 0x68)
-#	define DIS_MMC2_DPLL_REQ	(1 << 11)
-#	define DIS_MMC1_DPLL_REQ	(1 << 10)
-#	define DIS_UART3_DPLL_REQ	(1 << 9)
-#	define DIS_UART2_DPLL_REQ	(1 << 8)
-#	define DIS_UART1_DPLL_REQ	(1 << 7)
-#	define DIS_USB_HOST_DPLL_REQ	(1 << 6)
-#define ULPD_SDW_CLK_DIV_CTRL_SEL	(ULPD_REG_BASE + 0x74)
-#define ULPD_CAM_CLK_CTRL	(ULPD_REG_BASE + 0x7c)
-
-/*
- * ---------------------------------------------------------------------------
- * Watchdog timer
- * ---------------------------------------------------------------------------
- */
-
-/* Watchdog timer within the OMAP3.2 gigacell */
-#define OMAP_MPU_WATCHDOG_BASE	(0xfffec800)
-#define OMAP_WDT_TIMER		(OMAP_MPU_WATCHDOG_BASE + 0x0)
-#define OMAP_WDT_LOAD_TIM	(OMAP_MPU_WATCHDOG_BASE + 0x4)
-#define OMAP_WDT_READ_TIM	(OMAP_MPU_WATCHDOG_BASE + 0x4)
-#define OMAP_WDT_TIMER_MODE	(OMAP_MPU_WATCHDOG_BASE + 0x8)
-
-/*
- * ---------------------------------------------------------------------------
- * Interrupts
- * ---------------------------------------------------------------------------
- */
-#ifdef CONFIG_ARCH_OMAP1
-
-/*
- * XXX: These probably want to be moved to arch/arm/mach-omap/omap1/irq.c
- * or something similar.. -- PFM.
- */
-
-#define OMAP_IH1_BASE		0xfffecb00
-#define OMAP_IH2_BASE		0xfffe0000
-
-#define OMAP_IH1_ITR		(OMAP_IH1_BASE + 0x00)
-#define OMAP_IH1_MIR		(OMAP_IH1_BASE + 0x04)
-#define OMAP_IH1_SIR_IRQ	(OMAP_IH1_BASE + 0x10)
-#define OMAP_IH1_SIR_FIQ	(OMAP_IH1_BASE + 0x14)
-#define OMAP_IH1_CONTROL	(OMAP_IH1_BASE + 0x18)
-#define OMAP_IH1_ILR0		(OMAP_IH1_BASE + 0x1c)
-#define OMAP_IH1_ISR		(OMAP_IH1_BASE + 0x9c)
-
-#define OMAP_IH2_ITR		(OMAP_IH2_BASE + 0x00)
-#define OMAP_IH2_MIR		(OMAP_IH2_BASE + 0x04)
-#define OMAP_IH2_SIR_IRQ	(OMAP_IH2_BASE + 0x10)
-#define OMAP_IH2_SIR_FIQ	(OMAP_IH2_BASE + 0x14)
-#define OMAP_IH2_CONTROL	(OMAP_IH2_BASE + 0x18)
-#define OMAP_IH2_ILR0		(OMAP_IH2_BASE + 0x1c)
-#define OMAP_IH2_ISR		(OMAP_IH2_BASE + 0x9c)
-
-#define IRQ_ITR_REG_OFFSET	0x00
-#define IRQ_MIR_REG_OFFSET	0x04
-#define IRQ_SIR_IRQ_REG_OFFSET	0x10
-#define IRQ_SIR_FIQ_REG_OFFSET	0x14
-#define IRQ_CONTROL_REG_OFFSET	0x18
-#define IRQ_ISR_REG_OFFSET	0x9c
-#define IRQ_ILR0_REG_OFFSET	0x1c
-#define IRQ_GMR_REG_OFFSET	0xa0
-
-#endif
-
-/*
- * ----------------------------------------------------------------------------
- * System control registers
- * ----------------------------------------------------------------------------
- */
-#define MOD_CONF_CTRL_0		0xfffe1080
-#define MOD_CONF_CTRL_1		0xfffe1110
-
-/*
- * ----------------------------------------------------------------------------
- * Pin multiplexing registers
- * ----------------------------------------------------------------------------
- */
-#define FUNC_MUX_CTRL_0		0xfffe1000
-#define FUNC_MUX_CTRL_1		0xfffe1004
-#define FUNC_MUX_CTRL_2		0xfffe1008
-#define COMP_MODE_CTRL_0	0xfffe100c
-#define FUNC_MUX_CTRL_3		0xfffe1010
-#define FUNC_MUX_CTRL_4		0xfffe1014
-#define FUNC_MUX_CTRL_5		0xfffe1018
-#define FUNC_MUX_CTRL_6		0xfffe101C
-#define FUNC_MUX_CTRL_7		0xfffe1020
-#define FUNC_MUX_CTRL_8		0xfffe1024
-#define FUNC_MUX_CTRL_9		0xfffe1028
-#define FUNC_MUX_CTRL_A		0xfffe102C
-#define FUNC_MUX_CTRL_B		0xfffe1030
-#define FUNC_MUX_CTRL_C		0xfffe1034
-#define FUNC_MUX_CTRL_D		0xfffe1038
-#define PULL_DWN_CTRL_0		0xfffe1040
-#define PULL_DWN_CTRL_1		0xfffe1044
-#define PULL_DWN_CTRL_2		0xfffe1048
-#define PULL_DWN_CTRL_3		0xfffe104c
-#define PULL_DWN_CTRL_4		0xfffe10ac
-
-/* OMAP-1610 specific multiplexing registers */
-#define FUNC_MUX_CTRL_E		0xfffe1090
-#define FUNC_MUX_CTRL_F		0xfffe1094
-#define FUNC_MUX_CTRL_10	0xfffe1098
-#define FUNC_MUX_CTRL_11	0xfffe109c
-#define FUNC_MUX_CTRL_12	0xfffe10a0
-#define PU_PD_SEL_0		0xfffe10b4
-#define PU_PD_SEL_1		0xfffe10b8
-#define PU_PD_SEL_2		0xfffe10bc
-#define PU_PD_SEL_3		0xfffe10c0
-#define PU_PD_SEL_4		0xfffe10c4
-
-/* Timer32K for 1610 and 1710*/
-#define OMAP_TIMER32K_BASE	0xFFFBC400
-
-/*
- * ---------------------------------------------------------------------------
- * TIPB bus interface
- * ---------------------------------------------------------------------------
- */
-#define TIPB_PUBLIC_CNTL_BASE		0xfffed300
-#define MPU_PUBLIC_TIPB_CNTL		(TIPB_PUBLIC_CNTL_BASE + 0x8)
-#define TIPB_PRIVATE_CNTL_BASE		0xfffeca00
-#define MPU_PRIVATE_TIPB_CNTL		(TIPB_PRIVATE_CNTL_BASE + 0x8)
-
-/*
- * ----------------------------------------------------------------------------
- * MPUI interface
- * ----------------------------------------------------------------------------
- */
-#define MPUI_BASE			(0xfffec900)
-#define MPUI_CTRL			(MPUI_BASE + 0x0)
-#define MPUI_DEBUG_ADDR			(MPUI_BASE + 0x4)
-#define MPUI_DEBUG_DATA			(MPUI_BASE + 0x8)
-#define MPUI_DEBUG_FLAG			(MPUI_BASE + 0xc)
-#define MPUI_STATUS_REG			(MPUI_BASE + 0x10)
-#define MPUI_DSP_STATUS			(MPUI_BASE + 0x14)
-#define MPUI_DSP_BOOT_CONFIG		(MPUI_BASE + 0x18)
-#define MPUI_DSP_API_CONFIG		(MPUI_BASE + 0x1c)
-
-/*
- * ----------------------------------------------------------------------------
- * LED Pulse Generator
- * ----------------------------------------------------------------------------
- */
-#define OMAP_LPG1_BASE			0xfffbd000
-#define OMAP_LPG2_BASE			0xfffbd800
-#define OMAP_LPG1_LCR			(OMAP_LPG1_BASE + 0x00)
-#define OMAP_LPG1_PMR			(OMAP_LPG1_BASE + 0x04)
-#define OMAP_LPG2_LCR			(OMAP_LPG2_BASE + 0x00)
-#define OMAP_LPG2_PMR			(OMAP_LPG2_BASE + 0x04)
-
-/*
- * ----------------------------------------------------------------------------
- * Pulse-Width Light
- * ----------------------------------------------------------------------------
- */
-#define OMAP_PWL_BASE			0xfffb5800
-#define OMAP_PWL_ENABLE			(OMAP_PWL_BASE + 0x00)
-#define OMAP_PWL_CLK_ENABLE		(OMAP_PWL_BASE + 0x04)
-
-/*
- * ---------------------------------------------------------------------------
- * Processor specific defines
- * ---------------------------------------------------------------------------
- */
-
-#include "omap730.h"
-#include "omap1510.h"
-#include "omap24xx.h"
-#include "omap16xx.h"
-#include "omap34xx.h"
-
-#ifndef __ASSEMBLER__
-
-/*
- * ---------------------------------------------------------------------------
- * Board specific defines
- * ---------------------------------------------------------------------------
- */
-
-#ifdef CONFIG_MACH_OMAP_INNOVATOR
-#include "board-innovator.h"
-#endif
-
-#ifdef CONFIG_MACH_OMAP_H2
-#include "board-h2.h"
-#endif
-
-#ifdef CONFIG_MACH_OMAP_PERSEUS2
-#include "board-perseus2.h"
-#endif
-
-#ifdef CONFIG_MACH_OMAP_FSAMPLE
-#include "board-fsample.h"
-#endif
-
-#ifdef CONFIG_MACH_OMAP_H3
-#include "board-h3.h"
-#endif
-
-#ifdef CONFIG_MACH_OMAP_H4
-#include "board-h4.h"
-#endif
-
-#ifdef CONFIG_MACH_OMAP_2430SDP
-#include "board-2430sdp.h"
-#endif
-
-#ifdef CONFIG_MACH_OMAP_APOLLON
-#include "board-apollon.h"
-#endif
-
-#ifdef CONFIG_MACH_OMAP_OSK
-#include "board-osk.h"
-#endif
-
-#ifdef CONFIG_MACH_VOICEBLUE
-#include "board-voiceblue.h"
-#endif
-
-#ifdef CONFIG_MACH_OMAP_PALMTE
-#include "board-palmte.h"
-#endif
-
-#ifdef CONFIG_MACH_OMAP_PALMZ71
-#include "board-palmz71.h"
-#endif
-
-#ifdef CONFIG_MACH_OMAP_PALMTT
-#include "board-palmtt.h"
-#endif
-
-#ifdef CONFIG_MACH_SX1
-#include "board-sx1.h"
-#endif
-
-#endif /* !__ASSEMBLER__ */
-
-#endif	/* __ASM_ARCH_OMAP_HARDWARE_H */
diff --git a/include/asm-arm/arch-omap/io.h b/include/asm-arm/arch-omap/io.h
deleted file mode 100644
index 0b13557fd30b..000000000000
--- a/include/asm-arm/arch-omap/io.h
+++ /dev/null
@@ -1,197 +0,0 @@
-/*
- * linux/include/asm-arm/arch-omap/io.h
- *
- * IO definitions for TI OMAP processors and boards
- *
- * Copied from linux/include/asm-arm/arch-sa1100/io.h
- * Copyright (C) 1997-1999 Russell King
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
- * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
- * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- * Modifications:
- *  06-12-1997	RMK	Created.
- *  07-04-1999	RMK	Major cleanup
- */
-
-#ifndef __ASM_ARM_ARCH_IO_H
-#define __ASM_ARM_ARCH_IO_H
-
-#include <asm/hardware.h>
-
-#define IO_SPACE_LIMIT 0xffffffff
-
-/*
- * We don't actually have real ISA nor PCI buses, but there is so many
- * drivers out there that might just work if we fake them...
- */
-#define __io(a)			((void __iomem *)(PCIO_BASE + (a)))
-#define __mem_pci(a)		(a)
-
-/*
- * ----------------------------------------------------------------------------
- * I/O mapping
- * ----------------------------------------------------------------------------
- */
-
-#define PCIO_BASE	0
-
-#if defined(CONFIG_ARCH_OMAP1)
-
-#define IO_PHYS		0xFFFB0000
-#define IO_OFFSET	0x01000000	/* Virtual IO = 0xfefb0000 */
-#define IO_SIZE		0x40000
-#define IO_VIRT		(IO_PHYS - IO_OFFSET)
-#define IO_ADDRESS(pa)	((pa) - IO_OFFSET)
-#define OMAP1_IO_ADDRESS(pa)	((pa) - IO_OFFSET)
-#define io_p2v(pa)	((pa) - IO_OFFSET)
-#define io_v2p(va)	((va) + IO_OFFSET)
-
-#elif defined(CONFIG_ARCH_OMAP2)
-
-/* We map both L3 and L4 on OMAP2 */
-#define L3_24XX_PHYS	L3_24XX_BASE	/* 0x68000000 */
-#define L3_24XX_VIRT	0xf8000000
-#define L3_24XX_SIZE	SZ_1M		/* 44kB of 128MB used, want 1MB sect */
-#define L4_24XX_PHYS	L4_24XX_BASE	/* 0x48000000 */
-#define L4_24XX_VIRT	0xd8000000
-#define L4_24XX_SIZE	SZ_1M		/* 1MB of 128MB used, want 1MB sect */
-
-#ifdef CONFIG_ARCH_OMAP2430
-#define L4_WK_243X_PHYS		L4_WK_243X_BASE		/* 0x49000000 */
-#define L4_WK_243X_VIRT		0xd9000000
-#define L4_WK_243X_SIZE		SZ_1M
-#define OMAP243X_GPMC_PHYS	OMAP243X_GPMC_BASE	/* 0x49000000 */
-#define OMAP243X_GPMC_VIRT	0xFE000000
-#define OMAP243X_GPMC_SIZE	SZ_1M
-#define OMAP243X_SDRC_PHYS	OMAP243X_SDRC_BASE
-#define OMAP243X_SDRC_VIRT	0xFD000000
-#define OMAP243X_SDRC_SIZE	SZ_1M
-#define OMAP243X_SMS_PHYS	OMAP243X_SMS_BASE
-#define OMAP243X_SMS_VIRT	0xFC000000
-#define OMAP243X_SMS_SIZE	SZ_1M
-
-#endif
-
-#define IO_OFFSET	0x90000000
-#define IO_ADDRESS(pa)	((pa) + IO_OFFSET)	/* Works for L3 and L4 */
-#define OMAP2_IO_ADDRESS(pa)	((pa) + IO_OFFSET)	/* Works for L3 and L4 */
-#define io_p2v(pa)	((pa) + IO_OFFSET)	/* Works for L3 and L4 */
-#define io_v2p(va)	((va) - IO_OFFSET)	/* Works for L3 and L4 */
-
-/* DSP */
-#define DSP_MEM_24XX_PHYS	OMAP2420_DSP_MEM_BASE	/* 0x58000000 */
-#define DSP_MEM_24XX_VIRT	0xe0000000
-#define DSP_MEM_24XX_SIZE	0x28000
-#define DSP_IPI_24XX_PHYS	OMAP2420_DSP_IPI_BASE	/* 0x59000000 */
-#define DSP_IPI_24XX_VIRT	0xe1000000
-#define DSP_IPI_24XX_SIZE	SZ_4K
-#define DSP_MMU_24XX_PHYS	OMAP2420_DSP_MMU_BASE	/* 0x5a000000 */
-#define DSP_MMU_24XX_VIRT	0xe2000000
-#define DSP_MMU_24XX_SIZE	SZ_4K
-
-#elif defined(CONFIG_ARCH_OMAP3)
-
-/* We map both L3 and L4 on OMAP3 */
-#define L3_34XX_PHYS		L3_34XX_BASE	/* 0x68000000 */
-#define L3_34XX_VIRT		0xf8000000
-#define L3_34XX_SIZE		SZ_1M   /* 44kB of 128MB used, want 1MB sect */
-
-#define L4_34XX_PHYS		L4_34XX_BASE	/* 0x48000000 */
-#define L4_34XX_VIRT		0xd8000000
-#define L4_34XX_SIZE		SZ_4M   /* 1MB of 128MB used, want 1MB sect */
-
-/*
- * Need to look at the Size 4M for L4.
- * VPOM3430 was not working for Int controller
- */
-
-#define L4_WK_34XX_PHYS		L4_WK_34XX_BASE /* 0x48300000 */
-#define L4_WK_34XX_VIRT		0xd8300000
-#define L4_WK_34XX_SIZE		SZ_1M
-
-#define L4_PER_34XX_PHYS	L4_PER_34XX_BASE /* 0x49000000 */
-#define L4_PER_34XX_VIRT	0xd9000000
-#define L4_PER_34XX_SIZE	SZ_1M
-
-#define L4_EMU_34XX_PHYS	L4_EMU_34XX_BASE /* 0x54000000 */
-#define L4_EMU_34XX_VIRT	0xe4000000
-#define L4_EMU_34XX_SIZE	SZ_64M
-
-#define OMAP34XX_GPMC_PHYS	OMAP34XX_GPMC_BASE /* 0x6E000000 */
-#define OMAP34XX_GPMC_VIRT	0xFE000000
-#define OMAP34XX_GPMC_SIZE	SZ_1M
-
-#define OMAP343X_SMS_PHYS	OMAP343X_SMS_BASE /* 0x6C000000 */
-#define OMAP343X_SMS_VIRT	0xFC000000
-#define OMAP343X_SMS_SIZE	SZ_1M
-
-#define OMAP343X_SDRC_PHYS	OMAP343X_SDRC_BASE /* 0x6D000000 */
-#define OMAP343X_SDRC_VIRT	0xFD000000
-#define OMAP343X_SDRC_SIZE	SZ_1M
-
-
-#define IO_OFFSET		0x90000000
-#define IO_ADDRESS(pa)		((pa) + IO_OFFSET)/* Works for L3 and L4 */
-#define OMAP2_IO_ADDRESS(pa)	((pa) + IO_OFFSET)/* Works for L3 and L4 */
-#define io_p2v(pa)		((pa) + IO_OFFSET)/* Works for L3 and L4 */
-#define io_v2p(va)		((va) - IO_OFFSET)/* Works for L3 and L4 */
-
-/* DSP */
-#define DSP_MEM_34XX_PHYS	OMAP34XX_DSP_MEM_BASE	/* 0x58000000 */
-#define DSP_MEM_34XX_VIRT	0xe0000000
-#define DSP_MEM_34XX_SIZE	0x28000
-#define DSP_IPI_34XX_PHYS	OMAP34XX_DSP_IPI_BASE	/* 0x59000000 */
-#define DSP_IPI_34XX_VIRT	0xe1000000
-#define DSP_IPI_34XX_SIZE	SZ_4K
-#define DSP_MMU_34XX_PHYS	OMAP34XX_DSP_MMU_BASE	/* 0x5a000000 */
-#define DSP_MMU_34XX_VIRT	0xe2000000
-#define DSP_MMU_34XX_SIZE	SZ_4K
-
-#endif
-
-#ifndef __ASSEMBLER__
-
-/*
- * Functions to access the OMAP IO region
- *
- * NOTE: - Use omap_read/write[bwl] for physical register addresses
- *	 - Use __raw_read/write[bwl]() for virtual register addresses
- *	 - Use IO_ADDRESS(phys_addr) to convert registers to virtual addresses
- *	 - DO NOT use hardcoded virtual addresses to allow changing the
- *	   IO address space again if needed
- */
-#define omap_readb(a)		(*(volatile unsigned char  *)IO_ADDRESS(a))
-#define omap_readw(a)		(*(volatile unsigned short *)IO_ADDRESS(a))
-#define omap_readl(a)		(*(volatile unsigned int   *)IO_ADDRESS(a))
-
-#define omap_writeb(v,a)	(*(volatile unsigned char  *)IO_ADDRESS(a) = (v))
-#define omap_writew(v,a)	(*(volatile unsigned short *)IO_ADDRESS(a) = (v))
-#define omap_writel(v,a)	(*(volatile unsigned int   *)IO_ADDRESS(a) = (v))
-
-extern void omap1_map_common_io(void);
-extern void omap1_init_common_hw(void);
-
-extern void omap2_map_common_io(void);
-extern void omap2_init_common_hw(void);
-
-#endif
-
-#endif
diff --git a/include/asm-arm/arch-omap/irda.h b/include/asm-arm/arch-omap/irda.h
deleted file mode 100644
index 96bb12fab438..000000000000
--- a/include/asm-arm/arch-omap/irda.h
+++ /dev/null
@@ -1,37 +0,0 @@
-/*
- *  linux/include/asm-arm/arch-omap/irda.h
- *
- *  Copyright (C) 2005-2006 Komal Shah <komal_shah802003@yahoo.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#ifndef ASMARM_ARCH_IRDA_H
-#define ASMARM_ARCH_IRDA_H
-
-/* board specific transceiver capabilities */
-
-#define IR_SEL		1	/* Selects IrDA */
-#define IR_SIRMODE	2
-#define IR_FIRMODE	4
-#define IR_MIRMODE	8
-
-struct omap_irda_config {
-	int transceiver_cap;
-	int (*transceiver_mode)(struct device *dev, int mode);
-	int (*select_irda)(struct device *dev, int state);
-	/* Very specific to the needs of some platforms (h3,h4)
-	 * having calls which can sleep in irda_set_speed.
-	 */
-	struct delayed_work gpio_expa;
-	int rx_channel;
-	int tx_channel;
-	unsigned long dest_start;
-	unsigned long src_start;
-	int tx_trigger;
-	int rx_trigger;
-	int mode;
-};
-
-#endif
diff --git a/include/asm-arm/arch-omap/irqs.h b/include/asm-arm/arch-omap/irqs.h
deleted file mode 100644
index 7464c694859b..000000000000
--- a/include/asm-arm/arch-omap/irqs.h
+++ /dev/null
@@ -1,332 +0,0 @@
-/*
- *  linux/include/asm-arm/arch-omap/irqs.h
- *
- *  Copyright (C) Greg Lonnon 2001
- *  Updated for OMAP-1610 by Tony Lindgren <tony@atomide.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- *
- * NOTE: The interrupt vectors for the OMAP-1509, OMAP-1510, and OMAP-1610
- *	 are different.
- */
-
-#ifndef __ASM_ARCH_OMAP15XX_IRQS_H
-#define __ASM_ARCH_OMAP15XX_IRQS_H
-
-/*
- * IRQ numbers for interrupt handler 1
- *
- * NOTE: See also the OMAP-1510 and 1610 specific IRQ numbers below
- *
- */
-#define INT_CAMERA		1
-#define INT_FIQ			3
-#define INT_RTDX		6
-#define INT_DSP_MMU_ABORT	7
-#define INT_HOST		8
-#define INT_ABORT		9
-#define INT_BRIDGE_PRIV		13
-#define INT_GPIO_BANK1		14
-#define INT_UART3		15
-#define INT_TIMER3		16
-#define INT_DMA_CH0_6		19
-#define INT_DMA_CH1_7		20
-#define INT_DMA_CH2_8		21
-#define INT_DMA_CH3		22
-#define INT_DMA_CH4		23
-#define INT_DMA_CH5		24
-#define INT_DMA_LCD		25
-#define INT_TIMER1		26
-#define INT_WD_TIMER		27
-#define INT_BRIDGE_PUB		28
-#define INT_TIMER2		30
-#define INT_LCD_CTRL		31
-
-/*
- * OMAP-1510 specific IRQ numbers for interrupt handler 1
- */
-#define INT_1510_IH2_IRQ	0
-#define INT_1510_RES2		2
-#define INT_1510_SPI_TX		4
-#define INT_1510_SPI_RX		5
-#define INT_1510_DSP_MAILBOX1	10
-#define INT_1510_DSP_MAILBOX2	11
-#define INT_1510_RES12		12
-#define INT_1510_LB_MMU		17
-#define INT_1510_RES18		18
-#define INT_1510_LOCAL_BUS	29
-
-/*
- * OMAP-1610 specific IRQ numbers for interrupt handler 1
- */
-#define INT_1610_IH2_IRQ	0
-#define INT_1610_IH2_FIQ	2
-#define INT_1610_McBSP2_TX	4
-#define INT_1610_McBSP2_RX	5
-#define INT_1610_DSP_MAILBOX1	10
-#define INT_1610_DSP_MAILBOX2	11
-#define INT_1610_LCD_LINE	12
-#define INT_1610_GPTIMER1	17
-#define INT_1610_GPTIMER2	18
-#define INT_1610_SSR_FIFO_0	29
-
-/*
- * OMAP-730 specific IRQ numbers for interrupt handler 1
- */
-#define INT_730_IH2_FIQ		0
-#define INT_730_IH2_IRQ		1
-#define INT_730_USB_NON_ISO	2
-#define INT_730_USB_ISO		3
-#define INT_730_ICR		4
-#define INT_730_EAC		5
-#define INT_730_GPIO_BANK1	6
-#define INT_730_GPIO_BANK2	7
-#define INT_730_GPIO_BANK3	8
-#define INT_730_McBSP2TX	10
-#define INT_730_McBSP2RX	11
-#define INT_730_McBSP2RX_OVF	12
-#define INT_730_LCD_LINE	14
-#define INT_730_GSM_PROTECT	15
-#define INT_730_TIMER3		16
-#define INT_730_GPIO_BANK5	17
-#define INT_730_GPIO_BANK6	18
-#define INT_730_SPGIO_WR	29
-
-/*
- * IRQ numbers for interrupt handler 2
- *
- * NOTE: See also the OMAP-1510 and 1610 specific IRQ numbers below
- */
-#define IH2_BASE		32
-
-#define INT_KEYBOARD		(1 + IH2_BASE)
-#define INT_uWireTX		(2 + IH2_BASE)
-#define INT_uWireRX		(3 + IH2_BASE)
-#define INT_I2C			(4 + IH2_BASE)
-#define INT_MPUIO		(5 + IH2_BASE)
-#define INT_USB_HHC_1		(6 + IH2_BASE)
-#define INT_McBSP3TX		(10 + IH2_BASE)
-#define INT_McBSP3RX		(11 + IH2_BASE)
-#define INT_McBSP1TX		(12 + IH2_BASE)
-#define INT_McBSP1RX		(13 + IH2_BASE)
-#define INT_UART1		(14 + IH2_BASE)
-#define INT_UART2		(15 + IH2_BASE)
-#define INT_BT_MCSI1TX		(16 + IH2_BASE)
-#define INT_BT_MCSI1RX		(17 + IH2_BASE)
-#define INT_USB_W2FC		(20 + IH2_BASE)
-#define INT_1WIRE		(21 + IH2_BASE)
-#define INT_OS_TIMER		(22 + IH2_BASE)
-#define INT_MMC			(23 + IH2_BASE)
-#define INT_GAUGE_32K		(24 + IH2_BASE)
-#define INT_RTC_TIMER		(25 + IH2_BASE)
-#define INT_RTC_ALARM		(26 + IH2_BASE)
-#define INT_MEM_STICK		(27 + IH2_BASE)
-
-/*
- * OMAP-1510 specific IRQ numbers for interrupt handler 2
- */
-#define INT_1510_DSP_MMU	(28 + IH2_BASE)
-#define INT_1510_COM_SPI_RO	(31 + IH2_BASE)
-
-/*
- * OMAP-1610 specific IRQ numbers for interrupt handler 2
- */
-#define INT_1610_FAC		(0 + IH2_BASE)
-#define INT_1610_USB_HHC_2	(7 + IH2_BASE)
-#define INT_1610_USB_OTG	(8 + IH2_BASE)
-#define INT_1610_SoSSI		(9 + IH2_BASE)
-#define INT_1610_SoSSI_MATCH	(19 + IH2_BASE)
-#define INT_1610_DSP_MMU	(28 + IH2_BASE)
-#define INT_1610_McBSP2RX_OF	(31 + IH2_BASE)
-#define INT_1610_STI		(32 + IH2_BASE)
-#define INT_1610_STI_WAKEUP	(33 + IH2_BASE)
-#define INT_1610_GPTIMER3	(34 + IH2_BASE)
-#define INT_1610_GPTIMER4	(35 + IH2_BASE)
-#define INT_1610_GPTIMER5	(36 + IH2_BASE)
-#define INT_1610_GPTIMER6	(37 + IH2_BASE)
-#define INT_1610_GPTIMER7	(38 + IH2_BASE)
-#define INT_1610_GPTIMER8	(39 + IH2_BASE)
-#define INT_1610_GPIO_BANK2	(40 + IH2_BASE)
-#define INT_1610_GPIO_BANK3	(41 + IH2_BASE)
-#define INT_1610_MMC2		(42 + IH2_BASE)
-#define INT_1610_CF		(43 + IH2_BASE)
-#define INT_1610_WAKE_UP_REQ	(46 + IH2_BASE)
-#define INT_1610_GPIO_BANK4	(48 + IH2_BASE)
-#define INT_1610_SPI		(49 + IH2_BASE)
-#define INT_1610_DMA_CH6	(53 + IH2_BASE)
-#define INT_1610_DMA_CH7	(54 + IH2_BASE)
-#define INT_1610_DMA_CH8	(55 + IH2_BASE)
-#define INT_1610_DMA_CH9	(56 + IH2_BASE)
-#define INT_1610_DMA_CH10	(57 + IH2_BASE)
-#define INT_1610_DMA_CH11	(58 + IH2_BASE)
-#define INT_1610_DMA_CH12	(59 + IH2_BASE)
-#define INT_1610_DMA_CH13	(60 + IH2_BASE)
-#define INT_1610_DMA_CH14	(61 + IH2_BASE)
-#define INT_1610_DMA_CH15	(62 + IH2_BASE)
-#define INT_1610_NAND		(63 + IH2_BASE)
-
-/*
- * OMAP-730 specific IRQ numbers for interrupt handler 2
- */
-#define INT_730_HW_ERRORS	(0 + IH2_BASE)
-#define INT_730_NFIQ_PWR_FAIL	(1 + IH2_BASE)
-#define INT_730_CFCD		(2 + IH2_BASE)
-#define INT_730_CFIREQ		(3 + IH2_BASE)
-#define INT_730_I2C		(4 + IH2_BASE)
-#define INT_730_PCC		(5 + IH2_BASE)
-#define INT_730_MPU_EXT_NIRQ	(6 + IH2_BASE)
-#define INT_730_SPI_100K_1	(7 + IH2_BASE)
-#define INT_730_SYREN_SPI	(8 + IH2_BASE)
-#define INT_730_VLYNQ		(9 + IH2_BASE)
-#define INT_730_GPIO_BANK4	(10 + IH2_BASE)
-#define INT_730_McBSP1TX	(11 + IH2_BASE)
-#define INT_730_McBSP1RX	(12 + IH2_BASE)
-#define INT_730_McBSP1RX_OF	(13 + IH2_BASE)
-#define INT_730_UART_MODEM_IRDA_2 (14 + IH2_BASE)
-#define INT_730_UART_MODEM_1	(15 + IH2_BASE)
-#define INT_730_MCSI		(16 + IH2_BASE)
-#define INT_730_uWireTX		(17 + IH2_BASE)
-#define INT_730_uWireRX		(18 + IH2_BASE)
-#define INT_730_SMC_CD		(19 + IH2_BASE)
-#define INT_730_SMC_IREQ	(20 + IH2_BASE)
-#define INT_730_HDQ_1WIRE	(21 + IH2_BASE)
-#define INT_730_TIMER32K	(22 + IH2_BASE)
-#define INT_730_MMC_SDIO	(23 + IH2_BASE)
-#define INT_730_UPLD		(24 + IH2_BASE)
-#define INT_730_USB_HHC_1	(27 + IH2_BASE)
-#define INT_730_USB_HHC_2	(28 + IH2_BASE)
-#define INT_730_USB_GENI	(29 + IH2_BASE)
-#define INT_730_USB_OTG		(30 + IH2_BASE)
-#define INT_730_CAMERA_IF	(31 + IH2_BASE)
-#define INT_730_RNG		(32 + IH2_BASE)
-#define INT_730_DUAL_MODE_TIMER (33 + IH2_BASE)
-#define INT_730_DBB_RF_EN	(34 + IH2_BASE)
-#define INT_730_MPUIO_KEYPAD	(35 + IH2_BASE)
-#define INT_730_SHA1_MD5	(36 + IH2_BASE)
-#define INT_730_SPI_100K_2	(37 + IH2_BASE)
-#define INT_730_RNG_IDLE	(38 + IH2_BASE)
-#define INT_730_MPUIO		(39 + IH2_BASE)
-#define INT_730_LLPC_LCD_CTRL_CAN_BE_OFF	(40 + IH2_BASE)
-#define INT_730_LLPC_OE_FALLING (41 + IH2_BASE)
-#define INT_730_LLPC_OE_RISING	(42 + IH2_BASE)
-#define INT_730_LLPC_VSYNC	(43 + IH2_BASE)
-#define INT_730_WAKE_UP_REQ	(46 + IH2_BASE)
-#define INT_730_DMA_CH6		(53 + IH2_BASE)
-#define INT_730_DMA_CH7		(54 + IH2_BASE)
-#define INT_730_DMA_CH8		(55 + IH2_BASE)
-#define INT_730_DMA_CH9		(56 + IH2_BASE)
-#define INT_730_DMA_CH10	(57 + IH2_BASE)
-#define INT_730_DMA_CH11	(58 + IH2_BASE)
-#define INT_730_DMA_CH12	(59 + IH2_BASE)
-#define INT_730_DMA_CH13	(60 + IH2_BASE)
-#define INT_730_DMA_CH14	(61 + IH2_BASE)
-#define INT_730_DMA_CH15	(62 + IH2_BASE)
-#define INT_730_NAND		(63 + IH2_BASE)
-
-#define INT_24XX_SYS_NIRQ	7
-#define INT_24XX_SDMA_IRQ0	12
-#define INT_24XX_SDMA_IRQ1	13
-#define INT_24XX_SDMA_IRQ2	14
-#define INT_24XX_SDMA_IRQ3	15
-#define INT_24XX_CAM_IRQ	24
-#define INT_24XX_DSS_IRQ	25
-#define INT_24XX_MAIL_U0_MPU	26
-#define INT_24XX_DSP_UMA	27
-#define INT_24XX_DSP_MMU	28
-#define INT_24XX_GPIO_BANK1	29
-#define INT_24XX_GPIO_BANK2	30
-#define INT_24XX_GPIO_BANK3	31
-#define INT_24XX_GPIO_BANK4	32
-#define INT_24XX_GPIO_BANK5	33
-#define INT_24XX_MAIL_U3_MPU	34
-#define INT_24XX_GPTIMER1	37
-#define INT_24XX_GPTIMER2	38
-#define INT_24XX_GPTIMER3	39
-#define INT_24XX_GPTIMER4	40
-#define INT_24XX_GPTIMER5	41
-#define INT_24XX_GPTIMER6	42
-#define INT_24XX_GPTIMER7	43
-#define INT_24XX_GPTIMER8	44
-#define INT_24XX_GPTIMER9	45
-#define INT_24XX_GPTIMER10	46
-#define INT_24XX_GPTIMER11	47
-#define INT_24XX_GPTIMER12	48
-#define INT_24XX_I2C1_IRQ	56
-#define INT_24XX_I2C2_IRQ	57
-#define INT_24XX_MCBSP1_IRQ_TX	59
-#define INT_24XX_MCBSP1_IRQ_RX	60
-#define INT_24XX_MCBSP2_IRQ_TX	62
-#define INT_24XX_MCBSP2_IRQ_RX	63
-#define INT_24XX_UART1_IRQ	72
-#define INT_24XX_UART2_IRQ	73
-#define INT_24XX_UART3_IRQ	74
-#define INT_24XX_USB_IRQ_GEN	75
-#define INT_24XX_USB_IRQ_NISO	76
-#define INT_24XX_USB_IRQ_ISO	77
-#define INT_24XX_USB_IRQ_HGEN	78
-#define INT_24XX_USB_IRQ_HSOF	79
-#define INT_24XX_USB_IRQ_OTG	80
-#define INT_24XX_MMC_IRQ	83
-
-/* Max. 128 level 2 IRQs (OMAP1610), 192 GPIOs (OMAP730) and
- * 16 MPUIO lines */
-#define OMAP_MAX_GPIO_LINES	192
-#define IH_GPIO_BASE		(128 + IH2_BASE)
-#define IH_MPUIO_BASE		(OMAP_MAX_GPIO_LINES + IH_GPIO_BASE)
-#define OMAP_IRQ_END		(IH_MPUIO_BASE + 16)
-
-/* External FPGA handles interrupts on Innovator boards */
-#define	OMAP_FPGA_IRQ_BASE	(OMAP_IRQ_END)
-#ifdef	CONFIG_MACH_OMAP_INNOVATOR
-#define OMAP_FPGA_NR_IRQS	24
-#else
-#define OMAP_FPGA_NR_IRQS	0
-#endif
-#define OMAP_FPGA_IRQ_END	(OMAP_FPGA_IRQ_BASE + OMAP_FPGA_NR_IRQS)
-
-/* External TWL4030 can handle interrupts on 2430 and 34xx boards */
-#define	TWL4030_IRQ_BASE	(OMAP_FPGA_IRQ_END)
-#ifdef	CONFIG_TWL4030_CORE
-#define	TWL4030_BASE_NR_IRQS	8
-#define	TWL4030_PWR_NR_IRQS	8
-#else
-#define	TWL4030_BASE_NR_IRQS	0
-#define	TWL4030_PWR_NR_IRQS	0
-#endif
-#define TWL4030_IRQ_END		(TWL4030_IRQ_BASE + TWL4030_BASE_NR_IRQS)
-#define TWL4030_PWR_IRQ_BASE	TWL4030_IRQ_END
-#define	TWL4030_PWR_IRQ_END	(TWL4030_PWR_IRQ_BASE + TWL4030_PWR_NR_IRQS)
-
-/* External TWL4030 gpio interrupts are optional */
-#define TWL4030_GPIO_IRQ_BASE	TWL4030_PWR_IRQ_END
-#ifdef	CONFIG_TWL4030_GPIO
-#define TWL4030_GPIO_NR_IRQS	18
-#else
-#define	TWL4030_GPIO_NR_IRQS	0
-#endif
-#define TWL4030_GPIO_IRQ_END	(TWL4030_GPIO_IRQ_BASE + TWL4030_GPIO_NR_IRQS)
-
-/* Total number of interrupts depends on the enabled blocks above */
-#define NR_IRQS			TWL4030_GPIO_IRQ_END
-
-#define OMAP_IRQ_BIT(irq)	(1 << ((irq) % 32))
-
-#ifndef __ASSEMBLY__
-extern void omap_init_irq(void);
-#endif
-
-#include <asm/hardware.h>
-
-#endif
diff --git a/include/asm-arm/arch-omap/memory.h b/include/asm-arm/arch-omap/memory.h
deleted file mode 100644
index 14cba97c18ad..000000000000
--- a/include/asm-arm/arch-omap/memory.h
+++ /dev/null
@@ -1,103 +0,0 @@
-/*
- * linux/include/asm-arm/arch-omap/memory.h
- *
- * Memory map for OMAP-1510 and 1610
- *
- * Copyright (C) 2000 RidgeRun, Inc.
- * Author: Greg Lonnon <glonnon@ridgerun.com>
- *
- * This file was derived from linux/include/asm-arm/arch-intergrator/memory.h
- * Copyright (C) 1999 ARM Limited
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
- * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
- * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef __ASM_ARCH_MEMORY_H
-#define __ASM_ARCH_MEMORY_H
-
-/*
- * Physical DRAM offset.
- */
-#if defined(CONFIG_ARCH_OMAP1)
-#define PHYS_OFFSET		UL(0x10000000)
-#elif defined(CONFIG_ARCH_OMAP2)
-#define PHYS_OFFSET		UL(0x80000000)
-#endif
-
-/*
- * Conversion between SDRAM and fake PCI bus, used by USB
- * NOTE: Physical address must be converted to Local Bus address
- *	 on OMAP-1510 only
- */
-
-/*
- * Bus address is physical address, except for OMAP-1510 Local Bus.
- */
-#define __virt_to_bus(x)	__virt_to_phys(x)
-#define __bus_to_virt(x)	__phys_to_virt(x)
-
-/*
- * OMAP-1510 bus address is translated into a Local Bus address if the
- * OMAP bus type is lbus. We do the address translation based on the
- * device overriding the defaults used in the dma-mapping API.
- * Note that the is_lbus_device() test is not very efficient on 1510
- * because of the strncmp().
- */
-#ifdef CONFIG_ARCH_OMAP15XX
-
-/*
- * OMAP-1510 Local Bus address offset
- */
-#define OMAP1510_LB_OFFSET	UL(0x30000000)
-
-#define virt_to_lbus(x)		((x) - PAGE_OFFSET + OMAP1510_LB_OFFSET)
-#define lbus_to_virt(x)		((x) - OMAP1510_LB_OFFSET + PAGE_OFFSET)
-#define is_lbus_device(dev)	(cpu_is_omap15xx() && dev && (strncmp(dev->bus_id, "ohci", 4) == 0))
-
-#define __arch_page_to_dma(dev, page)	({is_lbus_device(dev) ? \
-					(dma_addr_t)virt_to_lbus(page_address(page)) : \
-					(dma_addr_t)__virt_to_bus(page_address(page));})
-
-#define __arch_dma_to_virt(dev, addr)	({is_lbus_device(dev) ? \
-					lbus_to_virt(addr) : \
-					__bus_to_virt(addr);})
-
-#define __arch_virt_to_dma(dev, addr)	({is_lbus_device(dev) ? \
-					virt_to_lbus(addr) : \
-					__virt_to_bus(addr);})
-
-#endif	/* CONFIG_ARCH_OMAP15XX */
-
-/* Override the ARM default */
-#ifdef CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE
-
-#if (CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE == 0)
-#undef CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE
-#define CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE 2
-#endif
-
-#define CONSISTENT_DMA_SIZE \
-	(((CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE + 1) & ~1) * 1024 * 1024)
-
-#endif
-
-#endif
-
diff --git a/include/asm-arm/arch-omap/mmc.h b/include/asm-arm/arch-omap/mmc.h
deleted file mode 100644
index 7cfc5f258560..000000000000
--- a/include/asm-arm/arch-omap/mmc.h
+++ /dev/null
@@ -1,74 +0,0 @@
-/*
- * MMC definitions for OMAP2
- *
- * Copyright (C) 2006 Nokia Corporation
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __OMAP2_MMC_H
-#define __OMAP2_MMC_H
-
-#include <linux/types.h>
-#include <linux/device.h>
-#include <linux/mmc/host.h>
-
-#include <asm/arch/board.h>
-
-#define OMAP_MMC_MAX_SLOTS	2
-
-struct omap_mmc_platform_data {
-	struct omap_mmc_conf	conf;
-
-	/* number of slots on board */
-	unsigned nr_slots:2;
-
-	/* set if your board has components or wiring that limits the
-	 * maximum frequency on the MMC bus */
-	unsigned int max_freq;
-
-	/* switch the bus to a new slot */
-	int (* switch_slot)(struct device *dev, int slot);
-	/* initialize board-specific MMC functionality, can be NULL if
-	 * not supported */
-	int (* init)(struct device *dev);
-	void (* cleanup)(struct device *dev);
-	void (* shutdown)(struct device *dev);
-
-	/* To handle board related suspend/resume functionality for MMC */
-	int (*suspend)(struct device *dev, int slot);
-	int (*resume)(struct device *dev, int slot);
-
-	struct omap_mmc_slot_data {
-		int (* set_bus_mode)(struct device *dev, int slot, int bus_mode);
-		int (* set_power)(struct device *dev, int slot, int power_on, int vdd);
-		int (* get_ro)(struct device *dev, int slot);
-
-		/* return MMC cover switch state, can be NULL if not supported.
-		 *
-		 * possible return values:
-		 *   0 - open
-		 *   1 - closed
-		 */
-		int (* get_cover_state)(struct device *dev, int slot);
-
-		const char *name;
-		u32 ocr_mask;
-
-		/* Card detection IRQs */
-		int card_detect_irq;
-		int (* card_detect)(int irq);
-
-		unsigned int ban_openended:1;
-
-	} slots[OMAP_MMC_MAX_SLOTS];
-};
-
-extern void omap_set_mmc_info(int host, const struct omap_mmc_platform_data *info);
-
-/* called from board-specific card detection service routine */
-extern void omap_mmc_notify_cover_event(struct device *dev, int slot, int is_closed);
-
-#endif
diff --git a/include/asm-arm/arch-omap/mtd-xip.h b/include/asm-arm/arch-omap/mtd-xip.h
deleted file mode 100644
index a73a28571fee..000000000000
--- a/include/asm-arm/arch-omap/mtd-xip.h
+++ /dev/null
@@ -1,61 +0,0 @@
-/*
- * MTD primitives for XIP support. Architecture specific functions.
- *
- * Do not include this file directly. It's included from linux/mtd/xip.h
- *
- * Author: Vladimir Barinov <vbarinov@ru.mvista.com>
- *
- * (c) 2005 MontaVista Software, Inc.  This file is licensed under the
- * terms of the GNU General Public License version 2.  This program is
- * licensed "as is" without any warranty of any kind, whether express or
- * implied.
- */
-
-#ifndef __ARCH_OMAP_MTD_XIP_H__
-#define __ARCH_OMAP_MTD_XIP_H__
-
-#include <asm/hardware.h>
-#define OMAP_MPU_TIMER_BASE	(0xfffec500)
-#define OMAP_MPU_TIMER_OFFSET	0x100
-
-typedef struct {
-	u32 cntl;			/* CNTL_TIMER, R/W */
-	u32 load_tim;			/* LOAD_TIM,   W */
-	u32 read_tim;			/* READ_TIM,   R */
-} xip_omap_mpu_timer_regs_t;
-
-#define xip_omap_mpu_timer_base(n)					\
-((volatile xip_omap_mpu_timer_regs_t*)IO_ADDRESS(OMAP_MPU_TIMER_BASE +	\
-	(n)*OMAP_MPU_TIMER_OFFSET))
-
-static inline unsigned long xip_omap_mpu_timer_read(int nr)
-{
-	volatile xip_omap_mpu_timer_regs_t* timer = xip_omap_mpu_timer_base(nr);
-	return timer->read_tim;
-}
-
-#define xip_irqpending()	\
-	(omap_readl(OMAP_IH1_ITR) & ~omap_readl(OMAP_IH1_MIR))
-#define xip_currtime()		(~xip_omap_mpu_timer_read(0))
-
-/*
- * It's permitted to do approxmation for xip_elapsed_since macro
- * (see linux/mtd/xip.h)
- */
-
-#ifdef CONFIG_MACH_OMAP_PERSEUS2
-#define xip_elapsed_since(x)	(signed)((~xip_omap_mpu_timer_read(0) - (x)) / 7)
-#else
-#define xip_elapsed_since(x)	(signed)((~xip_omap_mpu_timer_read(0) - (x)) / 6)
-#endif
-
-/*
- * xip_cpu_idle() is used when waiting for a delay equal or larger than
- * the system timer tick period.  This should put the CPU into idle mode
- * to save power and to be woken up only when some interrupts are pending.
- * As above, this should not rely upon standard kernel code.
- */
-
-#define xip_cpu_idle()  asm volatile ("mcr p15, 0, %0, c7, c0, 4" :: "r" (1))
-
-#endif /* __ARCH_OMAP_MTD_XIP_H__ */
diff --git a/include/asm-arm/arch-omap/param.h b/include/asm-arm/arch-omap/param.h
deleted file mode 100644
index face9ad41e97..000000000000
--- a/include/asm-arm/arch-omap/param.h
+++ /dev/null
@@ -1,8 +0,0 @@
-/*
- *  linux/include/asm-arm/arch-omap/param.h
- *
- */
-
-#ifdef CONFIG_OMAP_32K_TIMER_HZ
-#define HZ	CONFIG_OMAP_32K_TIMER_HZ
-#endif
diff --git a/include/asm-arm/arch-omap/pm.h b/include/asm-arm/arch-omap/pm.h
deleted file mode 100644
index 14588059981f..000000000000
--- a/include/asm-arm/arch-omap/pm.h
+++ /dev/null
@@ -1,356 +0,0 @@
-/*
- * linux/include/asm-arm/arch-omap/pm.h
- *
- * Header file for OMAP Power Management Routines
- *
- * Author: MontaVista Software, Inc.
- *	   support@mvista.com
- *
- * Copyright 2002 MontaVista Software Inc.
- *
- * Cleanup 2004 for Linux 2.6 by Dirk Behme <dirk.behme@de.bosch.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
- * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
- * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef __ASM_ARCH_OMAP_PM_H
-#define __ASM_ARCH_OMAP_PM_H
-
-/*
- * ----------------------------------------------------------------------------
- * Register and offset definitions to be used in PM assembler code
- * ----------------------------------------------------------------------------
- */
-#define CLKGEN_REG_ASM_BASE		io_p2v(0xfffece00)
-#define ARM_IDLECT1_ASM_OFFSET		0x04
-#define ARM_IDLECT2_ASM_OFFSET		0x08
-
-#define TCMIF_ASM_BASE			io_p2v(0xfffecc00)
-#define EMIFS_CONFIG_ASM_OFFSET		0x0c
-#define EMIFF_SDRAM_CONFIG_ASM_OFFSET	0x20
-
-/*
- * ----------------------------------------------------------------------------
- * Power management bitmasks
- * ----------------------------------------------------------------------------
- */
-#define IDLE_WAIT_CYCLES		0x00000fff
-#define PERIPHERAL_ENABLE		0x2
-
-#define SELF_REFRESH_MODE		0x0c000001
-#define IDLE_EMIFS_REQUEST		0xc
-#define MODEM_32K_EN			0x1
-#define PER_EN				0x1
-
-#define CPU_SUSPEND_SIZE		200
-#define ULPD_LOW_PWR_EN			0x0001
-#define ULPD_DEEP_SLEEP_TRANSITION_EN	0x0010
-#define ULPD_SETUP_ANALOG_CELL_3_VAL	0
-#define ULPD_POWER_CTRL_REG_VAL		0x0219
-
-#define DSP_IDLE_DELAY			10
-#define DSP_IDLE			0x0040
-#define DSP_RST				0x0004
-#define DSP_ENABLE			0x0002
-#define SUFFICIENT_DSP_RESET_TIME	1000
-#define DEFAULT_MPUI_CONFIG		0x05cf
-#define ENABLE_XORCLK			0x2
-#define DSP_CLOCK_ENABLE		0x2000
-#define DSP_IDLE_MODE			0x2
-#define TC_IDLE_REQUEST			(0x0000000c)
-
-#define IRQ_LEVEL2			(1<<0)
-#define IRQ_KEYBOARD			(1<<1)
-#define IRQ_UART2			(1<<15)
-
-#define PDE_BIT				0x08
-#define PWD_EN_BIT			0x04
-#define EN_PERCK_BIT			0x04
-
-#define OMAP1510_DEEP_SLEEP_REQUEST	0x0ec7
-#define OMAP1510_BIG_SLEEP_REQUEST	0x0cc5
-#define OMAP1510_IDLE_LOOP_REQUEST	0x0c00
-#define OMAP1510_IDLE_CLOCK_DOMAINS	0x2
-
-/* Both big sleep and deep sleep use same values. Difference is in ULPD. */
-#define OMAP1610_IDLECT1_SLEEP_VAL	0x13c7
-#define OMAP1610_IDLECT2_SLEEP_VAL	0x09c7
-#define OMAP1610_IDLECT3_VAL		0x3f
-#define OMAP1610_IDLECT3_SLEEP_ORMASK	0x2c
-#define OMAP1610_IDLECT3		0xfffece24
-#define OMAP1610_IDLE_LOOP_REQUEST	0x0400
-
-#define OMAP730_IDLECT1_SLEEP_VAL	0x16c7
-#define OMAP730_IDLECT2_SLEEP_VAL	0x09c7
-#define OMAP730_IDLECT3_VAL		0x3f
-#define OMAP730_IDLECT3		0xfffece24
-#define OMAP730_IDLE_LOOP_REQUEST	0x0C00
-
-#if     !defined(CONFIG_ARCH_OMAP730) && \
-	!defined(CONFIG_ARCH_OMAP15XX) && \
-	!defined(CONFIG_ARCH_OMAP16XX) && \
-	!defined(CONFIG_ARCH_OMAP24XX)
-#error "Power management for this processor not implemented yet"
-#endif
-
-#ifndef __ASSEMBLER__
-
-#include <linux/clk.h>
-
-extern void prevent_idle_sleep(void);
-extern void allow_idle_sleep(void);
-
-/**
- * clk_deny_idle - Prevents the clock from being idled during MPU idle
- * @clk: clock signal handle
- */
-void clk_deny_idle(struct clk *clk);
-
-/**
- * clk_allow_idle - Counters previous clk_deny_idle
- * @clk: clock signal handle
- */
-void clk_deny_idle(struct clk *clk);
-
-extern void omap_pm_idle(void);
-extern void omap_pm_suspend(void);
-extern void omap730_cpu_suspend(unsigned short, unsigned short);
-extern void omap1510_cpu_suspend(unsigned short, unsigned short);
-extern void omap1610_cpu_suspend(unsigned short, unsigned short);
-extern void omap24xx_cpu_suspend(u32 dll_ctrl, u32 cpu_revision);
-extern void omap730_idle_loop_suspend(void);
-extern void omap1510_idle_loop_suspend(void);
-extern void omap1610_idle_loop_suspend(void);
-extern void omap24xx_idle_loop_suspend(void);
-
-extern unsigned int omap730_cpu_suspend_sz;
-extern unsigned int omap1510_cpu_suspend_sz;
-extern unsigned int omap1610_cpu_suspend_sz;
-extern unsigned int omap24xx_cpu_suspend_sz;
-extern unsigned int omap730_idle_loop_suspend_sz;
-extern unsigned int omap1510_idle_loop_suspend_sz;
-extern unsigned int omap1610_idle_loop_suspend_sz;
-extern unsigned int omap24xx_idle_loop_suspend_sz;
-
-#ifdef CONFIG_OMAP_SERIAL_WAKE
-extern void omap_serial_wake_trigger(int enable);
-#else
-#define omap_serial_wakeup_init()	{}
-#define omap_serial_wake_trigger(x)	{}
-#endif	/* CONFIG_OMAP_SERIAL_WAKE */
-
-#define ARM_SAVE(x) arm_sleep_save[ARM_SLEEP_SAVE_##x] = omap_readl(x)
-#define ARM_RESTORE(x) omap_writel((arm_sleep_save[ARM_SLEEP_SAVE_##x]), (x))
-#define ARM_SHOW(x) arm_sleep_save[ARM_SLEEP_SAVE_##x]
-
-#define DSP_SAVE(x) dsp_sleep_save[DSP_SLEEP_SAVE_##x] = __raw_readw(x)
-#define DSP_RESTORE(x) __raw_writew((dsp_sleep_save[DSP_SLEEP_SAVE_##x]), (x))
-#define DSP_SHOW(x) dsp_sleep_save[DSP_SLEEP_SAVE_##x]
-
-#define ULPD_SAVE(x) ulpd_sleep_save[ULPD_SLEEP_SAVE_##x] = omap_readw(x)
-#define ULPD_RESTORE(x) omap_writew((ulpd_sleep_save[ULPD_SLEEP_SAVE_##x]), (x))
-#define ULPD_SHOW(x) ulpd_sleep_save[ULPD_SLEEP_SAVE_##x]
-
-#define MPUI730_SAVE(x) mpui730_sleep_save[MPUI730_SLEEP_SAVE_##x] = omap_readl(x)
-#define MPUI730_RESTORE(x) omap_writel((mpui730_sleep_save[MPUI730_SLEEP_SAVE_##x]), (x))
-#define MPUI730_SHOW(x) mpui730_sleep_save[MPUI730_SLEEP_SAVE_##x]
-
-#define MPUI1510_SAVE(x) mpui1510_sleep_save[MPUI1510_SLEEP_SAVE_##x] = omap_readl(x)
-#define MPUI1510_RESTORE(x) omap_writel((mpui1510_sleep_save[MPUI1510_SLEEP_SAVE_##x]), (x))
-#define MPUI1510_SHOW(x) mpui1510_sleep_save[MPUI1510_SLEEP_SAVE_##x]
-
-#define MPUI1610_SAVE(x) mpui1610_sleep_save[MPUI1610_SLEEP_SAVE_##x] = omap_readl(x)
-#define MPUI1610_RESTORE(x) omap_writel((mpui1610_sleep_save[MPUI1610_SLEEP_SAVE_##x]), (x))
-#define MPUI1610_SHOW(x) mpui1610_sleep_save[MPUI1610_SLEEP_SAVE_##x]
-
-#define OMAP24XX_SAVE(x) omap24xx_sleep_save[OMAP24XX_SLEEP_SAVE_##x] = x
-#define OMAP24XX_RESTORE(x) x = omap24xx_sleep_save[OMAP24XX_SLEEP_SAVE_##x]
-#define OMAP24XX_SHOW(x) omap24xx_sleep_save[OMAP24XX_SLEEP_SAVE_##x]
-
-/*
- * List of global OMAP registers to preserve.
- * More ones like CP and general purpose register values are preserved
- * with the stack pointer in sleep.S.
- */
-
-enum arm_save_state {
-	ARM_SLEEP_SAVE_START = 0,
-	/*
-	 * MPU control registers 32 bits
-	 */
-	ARM_SLEEP_SAVE_ARM_CKCTL,
-	ARM_SLEEP_SAVE_ARM_IDLECT1,
-	ARM_SLEEP_SAVE_ARM_IDLECT2,
-	ARM_SLEEP_SAVE_ARM_IDLECT3,
-	ARM_SLEEP_SAVE_ARM_EWUPCT,
-	ARM_SLEEP_SAVE_ARM_RSTCT1,
-	ARM_SLEEP_SAVE_ARM_RSTCT2,
-	ARM_SLEEP_SAVE_ARM_SYSST,
-	ARM_SLEEP_SAVE_SIZE
-};
-
-enum dsp_save_state {
-	DSP_SLEEP_SAVE_START = 0,
-	/*
-	 * DSP registers 16 bits
-	 */
-	DSP_SLEEP_SAVE_DSP_IDLECT2,
-	DSP_SLEEP_SAVE_SIZE
-};
-
-enum ulpd_save_state {
-	ULPD_SLEEP_SAVE_START = 0,
-	/*
-	 * ULPD registers 16 bits
-	 */
-	ULPD_SLEEP_SAVE_ULPD_IT_STATUS,
-	ULPD_SLEEP_SAVE_ULPD_CLOCK_CTRL,
-	ULPD_SLEEP_SAVE_ULPD_SOFT_REQ,
-	ULPD_SLEEP_SAVE_ULPD_STATUS_REQ,
-	ULPD_SLEEP_SAVE_ULPD_DPLL_CTRL,
-	ULPD_SLEEP_SAVE_ULPD_POWER_CTRL,
-	ULPD_SLEEP_SAVE_SIZE
-};
-
-enum mpui1510_save_state {
-	MPUI1510_SLEEP_SAVE_START = 0,
-	/*
-	 * MPUI registers 32 bits
-	 */
-	MPUI1510_SLEEP_SAVE_MPUI_CTRL,
-	MPUI1510_SLEEP_SAVE_MPUI_DSP_BOOT_CONFIG,
-	MPUI1510_SLEEP_SAVE_MPUI_DSP_API_CONFIG,
-	MPUI1510_SLEEP_SAVE_MPUI_DSP_STATUS,
-	MPUI1510_SLEEP_SAVE_EMIFF_SDRAM_CONFIG,
-	MPUI1510_SLEEP_SAVE_EMIFS_CONFIG,
-	MPUI1510_SLEEP_SAVE_OMAP_IH1_MIR,
-	MPUI1510_SLEEP_SAVE_OMAP_IH2_MIR,
-#if defined(CONFIG_ARCH_OMAP15XX)
-	MPUI1510_SLEEP_SAVE_SIZE
-#else
-	MPUI1510_SLEEP_SAVE_SIZE = 0
-#endif
-};
-
-enum mpui730_save_state {
-	MPUI730_SLEEP_SAVE_START = 0,
-	/*
-	 * MPUI registers 32 bits
-	 */
-	MPUI730_SLEEP_SAVE_MPUI_CTRL,
-	MPUI730_SLEEP_SAVE_MPUI_DSP_BOOT_CONFIG,
-	MPUI730_SLEEP_SAVE_MPUI_DSP_API_CONFIG,
-	MPUI730_SLEEP_SAVE_MPUI_DSP_STATUS,
-	MPUI730_SLEEP_SAVE_EMIFF_SDRAM_CONFIG,
-	MPUI730_SLEEP_SAVE_EMIFS_CONFIG,
-	MPUI730_SLEEP_SAVE_OMAP_IH1_MIR,
-	MPUI730_SLEEP_SAVE_OMAP_IH2_0_MIR,
-	MPUI730_SLEEP_SAVE_OMAP_IH2_1_MIR,
-#if defined(CONFIG_ARCH_OMAP730)
-	MPUI730_SLEEP_SAVE_SIZE
-#else
-	MPUI730_SLEEP_SAVE_SIZE = 0
-#endif
-};
-
-enum mpui1610_save_state {
-	MPUI1610_SLEEP_SAVE_START = 0,
-	/*
-	 * MPUI registers 32 bits
-	 */
-	MPUI1610_SLEEP_SAVE_MPUI_CTRL,
-	MPUI1610_SLEEP_SAVE_MPUI_DSP_BOOT_CONFIG,
-	MPUI1610_SLEEP_SAVE_MPUI_DSP_API_CONFIG,
-	MPUI1610_SLEEP_SAVE_MPUI_DSP_STATUS,
-	MPUI1610_SLEEP_SAVE_EMIFF_SDRAM_CONFIG,
-	MPUI1610_SLEEP_SAVE_EMIFS_CONFIG,
-	MPUI1610_SLEEP_SAVE_OMAP_IH1_MIR,
-	MPUI1610_SLEEP_SAVE_OMAP_IH2_0_MIR,
-	MPUI1610_SLEEP_SAVE_OMAP_IH2_1_MIR,
-	MPUI1610_SLEEP_SAVE_OMAP_IH2_2_MIR,
-	MPUI1610_SLEEP_SAVE_OMAP_IH2_3_MIR,
-#if defined(CONFIG_ARCH_OMAP16XX)
-	MPUI1610_SLEEP_SAVE_SIZE
-#else
-	MPUI1610_SLEEP_SAVE_SIZE = 0
-#endif
-};
-
-enum omap24xx_save_state {
-	OMAP24XX_SLEEP_SAVE_START = 0,
-	OMAP24XX_SLEEP_SAVE_INTC_MIR0,
-	OMAP24XX_SLEEP_SAVE_INTC_MIR1,
-	OMAP24XX_SLEEP_SAVE_INTC_MIR2,
-
-	OMAP24XX_SLEEP_SAVE_CM_CLKSTCTRL_MPU,
-	OMAP24XX_SLEEP_SAVE_CM_CLKSTCTRL_CORE,
-	OMAP24XX_SLEEP_SAVE_CM_CLKSTCTRL_GFX,
-	OMAP24XX_SLEEP_SAVE_CM_CLKSTCTRL_DSP,
-	OMAP24XX_SLEEP_SAVE_CM_CLKSTCTRL_MDM,
-
-	OMAP24XX_SLEEP_SAVE_PM_PWSTCTRL_MPU,
-	OMAP24XX_SLEEP_SAVE_PM_PWSTCTRL_CORE,
-	OMAP24XX_SLEEP_SAVE_PM_PWSTCTRL_GFX,
-	OMAP24XX_SLEEP_SAVE_PM_PWSTCTRL_DSP,
-	OMAP24XX_SLEEP_SAVE_PM_PWSTCTRL_MDM,
-
-	OMAP24XX_SLEEP_SAVE_CM_IDLEST1_CORE,
-	OMAP24XX_SLEEP_SAVE_CM_IDLEST2_CORE,
-	OMAP24XX_SLEEP_SAVE_CM_IDLEST3_CORE,
-	OMAP24XX_SLEEP_SAVE_CM_IDLEST4_CORE,
-	OMAP24XX_SLEEP_SAVE_CM_IDLEST_GFX,
-	OMAP24XX_SLEEP_SAVE_CM_IDLEST_WKUP,
-	OMAP24XX_SLEEP_SAVE_CM_IDLEST_CKGEN,
-	OMAP24XX_SLEEP_SAVE_CM_IDLEST_DSP,
-	OMAP24XX_SLEEP_SAVE_CM_IDLEST_MDM,
-
-	OMAP24XX_SLEEP_SAVE_CM_AUTOIDLE1_CORE,
-	OMAP24XX_SLEEP_SAVE_CM_AUTOIDLE2_CORE,
-	OMAP24XX_SLEEP_SAVE_CM_AUTOIDLE3_CORE,
-	OMAP24XX_SLEEP_SAVE_CM_AUTOIDLE4_CORE,
-	OMAP24XX_SLEEP_SAVE_CM_AUTOIDLE_WKUP,
-	OMAP24XX_SLEEP_SAVE_CM_AUTOIDLE_PLL,
-	OMAP24XX_SLEEP_SAVE_CM_AUTOIDLE_DSP,
-	OMAP24XX_SLEEP_SAVE_CM_AUTOIDLE_MDM,
-
-	OMAP24XX_SLEEP_SAVE_CM_FCLKEN1_CORE,
-	OMAP24XX_SLEEP_SAVE_CM_FCLKEN2_CORE,
-	OMAP24XX_SLEEP_SAVE_CM_ICLKEN1_CORE,
-	OMAP24XX_SLEEP_SAVE_CM_ICLKEN2_CORE,
-	OMAP24XX_SLEEP_SAVE_CM_ICLKEN3_CORE,
-	OMAP24XX_SLEEP_SAVE_CM_ICLKEN4_CORE,
-	OMAP24XX_SLEEP_SAVE_GPIO1_IRQENABLE1,
-	OMAP24XX_SLEEP_SAVE_GPIO2_IRQENABLE1,
-	OMAP24XX_SLEEP_SAVE_GPIO3_IRQENABLE1,
-	OMAP24XX_SLEEP_SAVE_GPIO4_IRQENABLE1,
-	OMAP24XX_SLEEP_SAVE_GPIO3_OE,
-	OMAP24XX_SLEEP_SAVE_GPIO4_OE,
-	OMAP24XX_SLEEP_SAVE_GPIO3_RISINGDETECT,
-	OMAP24XX_SLEEP_SAVE_GPIO3_FALLINGDETECT,
-	OMAP24XX_SLEEP_SAVE_CONTROL_PADCONF_SPI1_NCS2,
-	OMAP24XX_SLEEP_SAVE_CONTROL_PADCONF_MCBSP1_DX,
-	OMAP24XX_SLEEP_SAVE_CONTROL_PADCONF_SSI1_FLAG_TX,
-	OMAP24XX_SLEEP_SAVE_CONTROL_PADCONF_SYS_NIRQW0,
-	OMAP24XX_SLEEP_SAVE_SIZE
-};
-
-#endif /* ASSEMBLER */
-#endif /* __ASM_ARCH_OMAP_PM_H */
diff --git a/include/asm-arm/arch-omap/serial.h b/include/asm-arm/arch-omap/serial.h
deleted file mode 100644
index 79a5297af9fc..000000000000
--- a/include/asm-arm/arch-omap/serial.h
+++ /dev/null
@@ -1,37 +0,0 @@
-/*
- *  linux/include/asm-arm/arch-omap/serial.h
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-#ifndef __ASM_ARCH_SERIAL_H
-#define __ASM_ARCH_SERIAL_H
-
-#if defined(CONFIG_ARCH_OMAP1)
-/* OMAP1 serial ports */
-#define OMAP_UART1_BASE		0xfffb0000
-#define OMAP_UART2_BASE		0xfffb0800
-#define OMAP_UART3_BASE		0xfffb9800
-#elif defined(CONFIG_ARCH_OMAP2)
-/* OMAP2 serial ports */
-#define OMAP_UART1_BASE		0x4806a000
-#define OMAP_UART2_BASE		0x4806c000
-#define OMAP_UART3_BASE		0x4806e000
-#endif
-
-#define OMAP_MAX_NR_PORTS	3
-#define OMAP1510_BASE_BAUD	(12000000/16)
-#define OMAP16XX_BASE_BAUD	(48000000/16)
-
-#define is_omap_port(p)	({int __ret = 0;			\
-			if (p == IO_ADDRESS(OMAP_UART1_BASE) ||	\
-			    p == IO_ADDRESS(OMAP_UART2_BASE) ||	\
-			    p == IO_ADDRESS(OMAP_UART3_BASE))	\
-				__ret = 1;			\
-			__ret;					\
-			})
-
-#endif
diff --git a/include/asm-arm/arch-omap/system.h b/include/asm-arm/arch-omap/system.h
deleted file mode 100644
index ac2bfa433f06..000000000000
--- a/include/asm-arm/arch-omap/system.h
+++ /dev/null
@@ -1,49 +0,0 @@
-/*
- * Copied from linux/include/asm-arm/arch-sa1100/system.h
- * Copyright (c) 1999 Nicolas Pitre <nico@cam.org>
- */
-#ifndef __ASM_ARCH_SYSTEM_H
-#define __ASM_ARCH_SYSTEM_H
-#include <linux/clk.h>
-
-#include <asm/mach-types.h>
-#include <asm/hardware.h>
-
-#ifndef CONFIG_MACH_VOICEBLUE
-#define voiceblue_reset()		do {} while (0)
-#endif
-
-extern void omap_prcm_arch_reset(char mode);
-
-static inline void arch_idle(void)
-{
-	cpu_do_idle();
-}
-
-static inline void omap1_arch_reset(char mode)
-{
-	/*
-	 * Workaround for 5912/1611b bug mentioned in sprz209d.pdf p. 28
-	 * "Global Software Reset Affects Traffic Controller Frequency".
-	 */
-	if (cpu_is_omap5912()) {
-		omap_writew(omap_readw(DPLL_CTL) & ~(1 << 4),
-				 DPLL_CTL);
-		omap_writew(0x8, ARM_RSTCT1);
-	}
-
-	if (machine_is_voiceblue())
-		voiceblue_reset();
-	else
-		omap_writew(1, ARM_RSTCT1);
-}
-
-static inline void arch_reset(char mode)
-{
-	if (!cpu_is_omap24xx())
-		omap1_arch_reset(mode);
-	else
-		omap_prcm_arch_reset(mode);
-}
-
-#endif
diff --git a/include/asm-arm/arch-omap/timex.h b/include/asm-arm/arch-omap/timex.h
deleted file mode 100644
index 21f2e367185a..000000000000
--- a/include/asm-arm/arch-omap/timex.h
+++ /dev/null
@@ -1,41 +0,0 @@
-/*
- * linux/include/asm-arm/arch-omap/timex.h
- *
- * Copyright (C) 2000 RidgeRun, Inc.
- * Author:  Greg Lonnon <glonnon@ridgerun.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
- * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
- * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- * You should have received a copy of the  GNU General Public License along
- * with this program; if not, write  to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#if !defined(__ASM_ARCH_OMAP_TIMEX_H)
-#define __ASM_ARCH_OMAP_TIMEX_H
-
-/*
- * OMAP 32KHz timer updates time one jiffie at a time from a secondary timer,
- * and that's why the CLOCK_TICK_RATE is not 32768.
- */
-#ifdef CONFIG_OMAP_32K_TIMER
-#define CLOCK_TICK_RATE		(CONFIG_OMAP_32K_TIMER_HZ)
-#else
-#define CLOCK_TICK_RATE		(HZ * 100000UL)
-#endif
-
-#endif /* __ASM_ARCH_OMAP_TIMEX_H */
diff --git a/include/asm-arm/arch-omap/uncompress.h b/include/asm-arm/arch-omap/uncompress.h
deleted file mode 100644
index aca0adfef1b8..000000000000
--- a/include/asm-arm/arch-omap/uncompress.h
+++ /dev/null
@@ -1,83 +0,0 @@
-/*
- * linux/include/asm-arm/arch-omap/uncompress.h
- *
- * Serial port stubs for kernel decompress status messages
- *
- * Initially based on:
- * linux-2.4.15-rmk1-dsplinux1.6/include/asm-arm/arch-omap1510/uncompress.h
- * Copyright (C) 2000 RidgeRun, Inc.
- * Author: Greg Lonnon <glonnon@ridgerun.com>
- *
- * Rewritten by:
- * Author: <source@mvista.com>
- * 2004 (c) MontaVista Software, Inc.
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2. This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
- */
-
-#include <linux/types.h>
-#include <linux/serial_reg.h>
-#include <asm/arch/serial.h>
-
-unsigned int system_rev;
-
-#define UART_OMAP_MDR1		0x08	/* mode definition register */
-#define OMAP_ID_730		0x355F
-#define ID_MASK			0x7fff
-#define check_port(base, shift) ((base[UART_OMAP_MDR1 << shift] & 7) == 0)
-#define omap_get_id() ((*(volatile unsigned int *)(0xfffed404)) >> 12) & ID_MASK
-
-static void putc(int c)
-{
-	volatile u8 * uart = 0;
-	int shift = 2;
-
-#ifdef CONFIG_MACH_OMAP_PALMTE
-	return;
-#endif
-
-#ifdef CONFIG_ARCH_OMAP
-#ifdef	CONFIG_OMAP_LL_DEBUG_UART3
-	uart = (volatile u8 *)(OMAP_UART3_BASE);
-#elif defined(CONFIG_OMAP_LL_DEBUG_UART2)
-	uart = (volatile u8 *)(OMAP_UART2_BASE);
-#else
-	uart = (volatile u8 *)(OMAP_UART1_BASE);
-#endif
-
-#ifdef CONFIG_ARCH_OMAP1
-	/* Determine which serial port to use */
-	do {
-		/* MMU is not on, so cpu_is_omapXXXX() won't work here */
-		unsigned int omap_id = omap_get_id();
-
-		if (omap_id == OMAP_ID_730)
-			shift = 0;
-
-		if (check_port(uart, shift))
-			break;
-		/* Silent boot if no serial ports are enabled. */
-		return;
-	} while (0);
-#endif /* CONFIG_ARCH_OMAP1 */
-#endif
-
-	/*
-	 * Now, xmit each character
-	 */
-	while (!(uart[UART_LSR << shift] & UART_LSR_THRE))
-		barrier();
-	uart[UART_TX << shift] = c;
-}
-
-static inline void flush(void)
-{
-}
-
-/*
- * nothing to do
- */
-#define arch_decomp_setup()
-#define arch_decomp_wdog()
diff --git a/include/asm-arm/arch-omap/vmalloc.h b/include/asm-arm/arch-omap/vmalloc.h
deleted file mode 100644
index 5b8bd8dae8be..000000000000
--- a/include/asm-arm/arch-omap/vmalloc.h
+++ /dev/null
@@ -1,21 +0,0 @@
-/*
- *  linux/include/asm-arm/arch-omap/vmalloc.h
- *
- *  Copyright (C) 2000 Russell King.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-#define VMALLOC_END	  (PAGE_OFFSET + 0x10000000)
-
diff --git a/include/asm-arm/arch-orion5x/debug-macro.S b/include/asm-arm/arch-orion5x/debug-macro.S
deleted file mode 100644
index 4f98f3ba2929..000000000000
--- a/include/asm-arm/arch-orion5x/debug-macro.S
+++ /dev/null
@@ -1,22 +0,0 @@
-/*
- * include/asm-arm/arch-orion5x/debug-macro.S
- *
- * Debugging macro include header
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <asm/arch/orion5x.h>
-
-	.macro  addruart,rx
-	mrc	p15, 0, \rx, c1, c0
-	tst	\rx, #1					@ MMU enabled?
-	ldreq	\rx, =ORION5X_REGS_PHYS_BASE
-	ldrne	\rx, =ORION5X_REGS_VIRT_BASE
-	orr	\rx, \rx, #0x00012000
-	.endm
-
-#define UART_SHIFT	2
-#include <asm/hardware/debug-8250.S>
diff --git a/include/asm-arm/arch-orion5x/entry-macro.S b/include/asm-arm/arch-orion5x/entry-macro.S
deleted file mode 100644
index d8ef54c0ee9a..000000000000
--- a/include/asm-arm/arch-orion5x/entry-macro.S
+++ /dev/null
@@ -1,31 +0,0 @@
-/*
- * include/asm-arm/arch-orion5x/entry-macro.S
- *
- * Low-level IRQ helper macros for Orion platforms
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <asm/arch/orion5x.h>
-
-	.macro  disable_fiq
-	.endm
-
-	.macro  arch_ret_to_user, tmp1, tmp2
-	.endm
-
-	.macro  get_irqnr_preamble, base, tmp
-	ldr	\base, =MAIN_IRQ_CAUSE
-	.endm
-
-	.macro  get_irqnr_and_base, irqnr, irqstat, base, tmp
-	ldr	\irqstat, [\base, #0]		@ main cause
-	ldr	\tmp, [\base, #(MAIN_IRQ_MASK - MAIN_IRQ_CAUSE)] @ main mask
-	mov	\irqnr, #0			@ default irqnr
-	@ find cause bits that are unmasked
-	ands	\irqstat, \irqstat, \tmp	@ clear Z flag if any
-	clzne	\irqnr,	\irqstat		@ calc irqnr
-	rsbne	\irqnr, \irqnr, #31
-	.endm
diff --git a/include/asm-arm/arch-orion5x/gpio.h b/include/asm-arm/arch-orion5x/gpio.h
deleted file mode 100644
index c85e498388b6..000000000000
--- a/include/asm-arm/arch-orion5x/gpio.h
+++ /dev/null
@@ -1,28 +0,0 @@
-/*
- * include/asm-arm/arch-orion5x/gpio.h
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-extern int gpio_request(unsigned pin, const char *label);
-extern void gpio_free(unsigned pin);
-extern int gpio_direction_input(unsigned pin);
-extern int gpio_direction_output(unsigned pin, int value);
-extern int gpio_get_value(unsigned pin);
-extern void gpio_set_value(unsigned pin, int value);
-extern void orion5x_gpio_set_blink(unsigned pin, int blink);
-extern void gpio_display(void);		/* debug */
-
-static inline int gpio_to_irq(int pin)
-{
-	return pin + IRQ_ORION5X_GPIO_START;
-}
-
-static inline int irq_to_gpio(int irq)
-{
-	return irq - IRQ_ORION5X_GPIO_START;
-}
-
-#include <asm-generic/gpio.h>		/* cansleep wrappers */
diff --git a/include/asm-arm/arch-orion5x/hardware.h b/include/asm-arm/arch-orion5x/hardware.h
deleted file mode 100644
index 5d2d8e0b5630..000000000000
--- a/include/asm-arm/arch-orion5x/hardware.h
+++ /dev/null
@@ -1,21 +0,0 @@
-/*
- * include/asm-arm/arch-orion5x/hardware.h
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ASM_ARCH_HARDWARE_H
-#define __ASM_ARCH_HARDWARE_H
-
-#include "orion5x.h"
-
-#define pcibios_assign_all_busses()	1
-
-#define PCIBIOS_MIN_IO		0x00001000
-#define PCIBIOS_MIN_MEM		0x01000000
-#define PCIMEM_BASE		ORION5X_PCIE_MEM_PHYS_BASE
-
-
-#endif
diff --git a/include/asm-arm/arch-orion5x/io.h b/include/asm-arm/arch-orion5x/io.h
deleted file mode 100644
index 59f1bc96a23b..000000000000
--- a/include/asm-arm/arch-orion5x/io.h
+++ /dev/null
@@ -1,63 +0,0 @@
-/*
- * include/asm-arm/arch-orion5x/io.h
- *
- * Tzachi Perelstein <tzachi@marvell.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __ASM_ARCH_IO_H
-#define __ASM_ARCH_IO_H
-
-#include "orion5x.h"
-
-#define IO_SPACE_LIMIT		0xffffffff
-
-static inline void __iomem *
-__arch_ioremap(unsigned long paddr, size_t size, unsigned int mtype)
-{
-	void __iomem *retval;
-	unsigned long offs = paddr - ORION5X_REGS_PHYS_BASE;
-	if (mtype == MT_DEVICE && size && offs < ORION5X_REGS_SIZE &&
-	    size <= ORION5X_REGS_SIZE && offs + size <= ORION5X_REGS_SIZE) {
-		retval = (void __iomem *)ORION5X_REGS_VIRT_BASE + offs;
-	} else {
-		retval = __arm_ioremap(paddr, size, mtype);
-	}
-
-	return retval;
-}
-
-static inline void
-__arch_iounmap(void __iomem *addr)
-{
-	if (addr < (void __iomem *)ORION5X_REGS_VIRT_BASE ||
-	    addr >= (void __iomem *)(ORION5X_REGS_VIRT_BASE + ORION5X_REGS_SIZE))
-		__iounmap(addr);
-}
-
-static inline void __iomem *__io(unsigned long addr)
-{
-	return (void __iomem *)addr;
-}
-
-#define __arch_ioremap(p, s, m)	__arch_ioremap(p, s, m)
-#define __arch_iounmap(a)	__arch_iounmap(a)
-#define __io(a)			__io(a)
-#define __mem_pci(a)		(a)
-
-
-/*****************************************************************************
- * Helpers to access Orion registers
- ****************************************************************************/
-/*
- * These are not preempt-safe.  Locks, if needed, must be taken
- * care of by the caller.
- */
-#define orion5x_setbits(r, mask)	writel(readl(r) | (mask), (r))
-#define orion5x_clrbits(r, mask)	writel(readl(r) & ~(mask), (r))
-
-
-#endif
diff --git a/include/asm-arm/arch-orion5x/irqs.h b/include/asm-arm/arch-orion5x/irqs.h
deleted file mode 100644
index abdd61a4833a..000000000000
--- a/include/asm-arm/arch-orion5x/irqs.h
+++ /dev/null
@@ -1,62 +0,0 @@
-/*
- * include/asm-arm/arch-orion5x/irqs.h
- *
- * IRQ definitions for Orion SoC
- *
- *  Maintainer: Tzachi Perelstein <tzachi@marvell.com>
- *
- *  This file is licensed under the terms of the GNU General Public
- *  License version 2. This program is licensed "as is" without any
- *  warranty of any kind, whether express or implied.
- */
-
-#ifndef __ASM_ARCH_IRQS_H
-#define __ASM_ARCH_IRQS_H
-
-#include "orion5x.h"	/* need GPIO_MAX */
-
-/*
- * Orion Main Interrupt Controller
- */
-#define IRQ_ORION5X_BRIDGE		0
-#define IRQ_ORION5X_DOORBELL_H2C	1
-#define IRQ_ORION5X_DOORBELL_C2H	2
-#define IRQ_ORION5X_UART0		3
-#define IRQ_ORION5X_UART1		4
-#define IRQ_ORION5X_I2C			5
-#define IRQ_ORION5X_GPIO_0_7		6
-#define IRQ_ORION5X_GPIO_8_15		7
-#define IRQ_ORION5X_GPIO_16_23		8
-#define IRQ_ORION5X_GPIO_24_31		9
-#define IRQ_ORION5X_PCIE0_ERR		10
-#define IRQ_ORION5X_PCIE0_INT		11
-#define IRQ_ORION5X_USB1_CTRL		12
-#define IRQ_ORION5X_DEV_BUS_ERR		14
-#define IRQ_ORION5X_PCI_ERR		15
-#define IRQ_ORION5X_USB_BR_ERR		16
-#define IRQ_ORION5X_USB0_CTRL		17
-#define IRQ_ORION5X_ETH_RX		18
-#define IRQ_ORION5X_ETH_TX		19
-#define IRQ_ORION5X_ETH_MISC		20
-#define IRQ_ORION5X_ETH_SUM		21
-#define IRQ_ORION5X_ETH_ERR		22
-#define IRQ_ORION5X_IDMA_ERR		23
-#define IRQ_ORION5X_IDMA_0		24
-#define IRQ_ORION5X_IDMA_1		25
-#define IRQ_ORION5X_IDMA_2		26
-#define IRQ_ORION5X_IDMA_3		27
-#define IRQ_ORION5X_CESA		28
-#define IRQ_ORION5X_SATA		29
-#define IRQ_ORION5X_XOR0		30
-#define IRQ_ORION5X_XOR1		31
-
-/*
- * Orion General Purpose Pins
- */
-#define IRQ_ORION5X_GPIO_START	32
-#define NR_GPIO_IRQS		GPIO_MAX
-
-#define NR_IRQS			(IRQ_ORION5X_GPIO_START + NR_GPIO_IRQS)
-
-
-#endif
diff --git a/include/asm-arm/arch-orion5x/memory.h b/include/asm-arm/arch-orion5x/memory.h
deleted file mode 100644
index 80053a7afc7a..000000000000
--- a/include/asm-arm/arch-orion5x/memory.h
+++ /dev/null
@@ -1,16 +0,0 @@
-/*
- * include/asm-arm/arch-orion5x/memory.h
- *
- * Marvell Orion memory definitions
- */
-
-#ifndef __ASM_ARCH_MEMORY_H
-#define __ASM_ARCH_MEMORY_H
-
-#define PHYS_OFFSET	UL(0x00000000)
-
-#define __virt_to_bus(x)	__virt_to_phys(x)
-#define __bus_to_virt(x)	__phys_to_virt(x)
-
-
-#endif
diff --git a/include/asm-arm/arch-orion5x/system.h b/include/asm-arm/arch-orion5x/system.h
deleted file mode 100644
index 3f1d1e2d38f8..000000000000
--- a/include/asm-arm/arch-orion5x/system.h
+++ /dev/null
@@ -1,32 +0,0 @@
-/*
- * include/asm-arm/arch-orion5x/system.h
- *
- * Tzachi Perelstein <tzachi@marvell.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __ASM_ARCH_SYSTEM_H
-#define __ASM_ARCH_SYSTEM_H
-
-#include <asm/arch/hardware.h>
-#include <asm/arch/orion5x.h>
-
-static inline void arch_idle(void)
-{
-	cpu_do_idle();
-}
-
-static inline void arch_reset(char mode)
-{
-	/*
-	 * Enable and issue soft reset
-	 */
-	orion5x_setbits(CPU_RESET_MASK, (1 << 2));
-	orion5x_setbits(CPU_SOFT_RESET, 1);
-}
-
-
-#endif
diff --git a/include/asm-arm/arch-orion5x/timex.h b/include/asm-arm/arch-orion5x/timex.h
deleted file mode 100644
index 31c568e28cc3..000000000000
--- a/include/asm-arm/arch-orion5x/timex.h
+++ /dev/null
@@ -1,13 +0,0 @@
-/*
- * include/asm-arm/arch-orion5x/timex.h
- *
- * Tzachi Perelstein <tzachi@marvell.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#define CLOCK_TICK_RATE		(100 * HZ)
-
-#define ORION5X_TCLK		166666667
diff --git a/include/asm-arm/arch-orion5x/uncompress.h b/include/asm-arm/arch-orion5x/uncompress.h
deleted file mode 100644
index 7548cedf2d76..000000000000
--- a/include/asm-arm/arch-orion5x/uncompress.h
+++ /dev/null
@@ -1,49 +0,0 @@
-/*
- * include/asm-arm/arch-orion5x/uncompress.h
- *
- * Tzachi Perelstein <tzachi@marvell.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <linux/serial_reg.h>
-#include <asm/arch/orion5x.h>
-
-#define SERIAL_BASE	((unsigned char *)UART0_PHYS_BASE)
-
-static void putc(const char c)
-{
-	unsigned char *base = SERIAL_BASE;
-	int i;
-
-	for (i = 0; i < 0x1000; i++) {
-		if (base[UART_LSR << 2] & UART_LSR_THRE)
-			break;
-		barrier();
-	}
-
-	base[UART_TX << 2] = c;
-}
-
-static void flush(void)
-{
-	unsigned char *base = SERIAL_BASE;
-	unsigned char mask;
-	int i;
-
-	mask = UART_LSR_TEMT | UART_LSR_THRE;
-
-	for (i = 0; i < 0x1000; i++) {
-		if ((base[UART_LSR << 2] & mask) == mask)
-			break;
-		barrier();
-	}
-}
-
-/*
- * nothing to do
- */
-#define arch_decomp_setup()
-#define arch_decomp_wdog()
diff --git a/include/asm-arm/arch-orion5x/vmalloc.h b/include/asm-arm/arch-orion5x/vmalloc.h
deleted file mode 100644
index 2b3061e90dc1..000000000000
--- a/include/asm-arm/arch-orion5x/vmalloc.h
+++ /dev/null
@@ -1,5 +0,0 @@
-/*
- * include/asm-arm/arch-orion5x/vmalloc.h
- */
-
-#define VMALLOC_END       0xfd800000
diff --git a/include/asm-arm/arch-pnx4008/clock.h b/include/asm-arm/arch-pnx4008/clock.h
deleted file mode 100644
index ce155e161269..000000000000
--- a/include/asm-arm/arch-pnx4008/clock.h
+++ /dev/null
@@ -1,62 +0,0 @@
-/*
- * include/asm-arm/arch-pnx4008/clock.h
- *
- * Clock control driver for PNX4008 - header file
- *
- * Authors: Vitaly Wool, Dmitry Chigirev <source@mvista.com>
- *
- * 2005 (c) MontaVista Software, Inc. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-#ifndef __PNX4008_CLOCK_H__
-#define __PNX4008_CLOCK_H__
-
-struct module;
-struct clk;
-
-#define PWRMAN_VA_BASE		IO_ADDRESS(PNX4008_PWRMAN_BASE)
-#define HCLKDIVCTRL_REG		(PWRMAN_VA_BASE + 0x40)
-#define PWRCTRL_REG		(PWRMAN_VA_BASE + 0x44)
-#define PLLCTRL_REG		(PWRMAN_VA_BASE + 0x48)
-#define OSC13CTRL_REG		(PWRMAN_VA_BASE + 0x4c)
-#define SYSCLKCTRL_REG		(PWRMAN_VA_BASE + 0x50)
-#define HCLKPLLCTRL_REG		(PWRMAN_VA_BASE + 0x58)
-#define USBCTRL_REG		(PWRMAN_VA_BASE + 0x64)
-#define SDRAMCLKCTRL_REG	(PWRMAN_VA_BASE + 0x68)
-#define MSCTRL_REG		(PWRMAN_VA_BASE + 0x80)
-#define BTCLKCTRL		(PWRMAN_VA_BASE + 0x84)
-#define DUMCLKCTRL_REG		(PWRMAN_VA_BASE + 0x90)
-#define I2CCLKCTRL_REG		(PWRMAN_VA_BASE + 0xac)
-#define KEYCLKCTRL_REG		(PWRMAN_VA_BASE + 0xb0)
-#define TSCLKCTRL_REG		(PWRMAN_VA_BASE + 0xb4)
-#define PWMCLKCTRL_REG		(PWRMAN_VA_BASE + 0xb8)
-#define TIMCLKCTRL_REG		(PWRMAN_VA_BASE + 0xbc)
-#define SPICTRL_REG		(PWRMAN_VA_BASE + 0xc4)
-#define FLASHCLKCTRL_REG	(PWRMAN_VA_BASE + 0xc8)
-#define UART3CLK_REG		(PWRMAN_VA_BASE + 0xd0)
-#define UARTCLKCTRL_REG		(PWRMAN_VA_BASE + 0xe4)
-#define DMACLKCTRL_REG		(PWRMAN_VA_BASE + 0xe8)
-#define AUTOCLK_CTRL		(PWRMAN_VA_BASE + 0xec)
-#define JPEGCLKCTRL_REG		(PWRMAN_VA_BASE + 0xfc)
-
-#define AUDIOCONFIG_VA_BASE	IO_ADDRESS(PNX4008_AUDIOCONFIG_BASE)
-#define DSPPLLCTRL_REG		(AUDIOCONFIG_VA_BASE + 0x60)
-#define DSPCLKCTRL_REG		(AUDIOCONFIG_VA_BASE + 0x64)
-#define AUDIOCLKCTRL_REG	(AUDIOCONFIG_VA_BASE + 0x68)
-#define AUDIOPLLCTRL_REG	(AUDIOCONFIG_VA_BASE + 0x6C)
-
-#define USB_OTG_CLKCTRL_REG	IO_ADDRESS(PNX4008_USB_CONFIG_BASE + 0xff4)
-
-#define VFP9CLKCTRL_REG		IO_ADDRESS(PNX4008_DEBUG_BASE)
-
-#define CLK_RATE_13MHZ 13000
-#define CLK_RATE_1MHZ 1000
-#define CLK_RATE_208MHZ 208000
-#define CLK_RATE_48MHZ 48000
-#define CLK_RATE_32KHZ 32
-
-#define PNX4008_UART_CLK CLK_RATE_13MHZ * 1000 /* in MHz */
-
-#endif
diff --git a/include/asm-arm/arch-pnx4008/debug-macro.S b/include/asm-arm/arch-pnx4008/debug-macro.S
deleted file mode 100644
index 67d18a203d23..000000000000
--- a/include/asm-arm/arch-pnx4008/debug-macro.S
+++ /dev/null
@@ -1,23 +0,0 @@
-/* linux/include/asm-arm/arch-pnx4008/debug-macro.S
- *
- * Debugging macro include header
- *
- *  Copyright (C) 1994-1999 Russell King
- *  Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
-*/
-
-		.macro	addruart,rx
-		mrc	p15, 0, \rx, c1, c0
-		tst	\rx, #1			@ MMU enabled?
-		mov	\rx, #0x00090000
-		addeq	\rx, \rx, #0x40000000
-		addne	\rx, \rx, #0xf4000000
-		.endm
-
-#define UART_SHIFT	2
-#include <asm/hardware/debug-8250.S>
diff --git a/include/asm-arm/arch-pnx4008/dma.h b/include/asm-arm/arch-pnx4008/dma.h
deleted file mode 100644
index 418f15283ff1..000000000000
--- a/include/asm-arm/arch-pnx4008/dma.h
+++ /dev/null
@@ -1,162 +0,0 @@
-/*
- *  linux/include/asm-arm/arch-pnx4008/dma.h
- *
- *  PNX4008 DMA header file
- *
- *  Author:	Vitaly Wool
- *  Copyright:	MontaVista Software Inc. (c) 2005
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License version 2 as
- *  published by the Free Software Foundation.
- */
-
-#ifndef __ASM_ARCH_DMA_H
-#define __ASM_ARCH_DMA_H
-
-#include "platform.h"
-
-#define MAX_DMA_ADDRESS		0xffffffff
-
-#define MAX_DMA_CHANNELS	8
-
-#define DMAC_BASE		IO_ADDRESS(PNX4008_DMA_CONFIG_BASE)
-#define DMAC_INT_STAT		(DMAC_BASE + 0x0000)
-#define DMAC_INT_TC_STAT	(DMAC_BASE + 0x0004)
-#define DMAC_INT_TC_CLEAR	(DMAC_BASE + 0x0008)
-#define DMAC_INT_ERR_STAT	(DMAC_BASE + 0x000c)
-#define DMAC_INT_ERR_CLEAR	(DMAC_BASE + 0x0010)
-#define DMAC_SOFT_SREQ		(DMAC_BASE + 0x0024)
-#define DMAC_CONFIG		(DMAC_BASE + 0x0030)
-#define DMAC_Cx_SRC_ADDR(c)	(DMAC_BASE + 0x0100 + (c) * 0x20)
-#define DMAC_Cx_DEST_ADDR(c)	(DMAC_BASE + 0x0104 + (c) * 0x20)
-#define DMAC_Cx_LLI(c)		(DMAC_BASE + 0x0108 + (c) * 0x20)
-#define DMAC_Cx_CONTROL(c)	(DMAC_BASE + 0x010c + (c) * 0x20)
-#define DMAC_Cx_CONFIG(c)	(DMAC_BASE + 0x0110 + (c) * 0x20)
-
-enum {
-	WIDTH_BYTE = 0,
-	WIDTH_HWORD,
-	WIDTH_WORD
-};
-
-enum {
-	FC_MEM2MEM_DMA,
-	FC_MEM2PER_DMA,
-	FC_PER2MEM_DMA,
-	FC_PER2PER_DMA,
-	FC_PER2PER_DPER,
-	FC_MEM2PER_PER,
-	FC_PER2MEM_PER,
-	FC_PER2PER_SPER
-};
-
-enum {
-	DMA_INT_UNKNOWN = 0,
-	DMA_ERR_INT = 1,
-	DMA_TC_INT = 2,
-};
-
-enum {
-	DMA_BUFFER_ALLOCATED = 1,
-	DMA_HAS_LL = 2,
-};
-
-enum {
-	PER_CAM_DMA_1 = 0,
-	PER_NDF_FLASH = 1,
-	PER_MBX_SLAVE_FIFO = 2,
-	PER_SPI2_REC_XMIT = 3,
-	PER_MS_SD_RX_XMIT = 4,
-	PER_HS_UART_1_XMIT = 5,
-	PER_HS_UART_1_RX = 6,
-	PER_HS_UART_2_XMIT = 7,
-	PER_HS_UART_2_RX = 8,
-	PER_HS_UART_7_XMIT = 9,
-	PER_HS_UART_7_RX = 10,
-	PER_SPI1_REC_XMIT = 11,
-	PER_MLC_NDF_SREC = 12,
-	PER_CAM_DMA_2 = 13,
-	PER_PRNG_INFIFO = 14,
-	PER_PRNG_OUTFIFO = 15,
-};
-
-struct pnx4008_dma_ch_ctrl {
-	int tc_mask;
-	int cacheable;
-	int bufferable;
-	int priv_mode;
-	int di;
-	int si;
-	int dest_ahb1;
-	int src_ahb1;
-	int dwidth;
-	int swidth;
-	int dbsize;
-	int sbsize;
-	int tr_size;
-};
-
-struct pnx4008_dma_ch_config {
-	int halt;
-	int active;
-	int lock;
-	int itc;
-	int ie;
-	int flow_cntrl;
-	int dest_per;
-	int src_per;
-};
-
-struct pnx4008_dma_ll {
-	unsigned long src_addr;
-	unsigned long dest_addr;
-	u32 next_dma;
-	unsigned long ch_ctrl;
-	struct pnx4008_dma_ll *next;
-	int flags;
-	void *alloc_data;
-	int (*free) (void *);
-};
-
-struct pnx4008_dma_config {
-	int is_ll;
-	unsigned long src_addr;
-	unsigned long dest_addr;
-	unsigned long ch_ctrl;
-	unsigned long ch_cfg;
-	struct pnx4008_dma_ll *ll;
-	u32 ll_dma;
-	int flags;
-	void *alloc_data;
-	int (*free) (void *);
-};
-
-extern struct pnx4008_dma_ll *pnx4008_alloc_ll_entry(dma_addr_t *);
-extern void pnx4008_free_ll_entry(struct pnx4008_dma_ll *, dma_addr_t);
-extern void pnx4008_free_ll(u32 ll_dma, struct pnx4008_dma_ll *);
-
-extern int pnx4008_request_channel(char *, int,
-				   void (*)(int, int, void *),
-				   void *);
-extern void pnx4008_free_channel(int);
-extern int pnx4008_config_dma(int, int, int);
-extern int pnx4008_dma_pack_control(const struct pnx4008_dma_ch_ctrl *,
-				    unsigned long *);
-extern int pnx4008_dma_parse_control(unsigned long,
-				     struct pnx4008_dma_ch_ctrl *);
-extern int pnx4008_dma_pack_config(const struct pnx4008_dma_ch_config *,
-				   unsigned long *);
-extern int pnx4008_dma_parse_config(unsigned long,
-				    struct pnx4008_dma_ch_config *);
-extern int pnx4008_config_channel(int, struct pnx4008_dma_config *);
-extern int pnx4008_channel_get_config(int, struct pnx4008_dma_config *);
-extern int pnx4008_dma_ch_enable(int);
-extern int pnx4008_dma_ch_disable(int);
-extern int pnx4008_dma_ch_enabled(int);
-extern void pnx4008_dma_split_head_entry(struct pnx4008_dma_config *,
-					 struct pnx4008_dma_ch_ctrl *);
-extern void pnx4008_dma_split_ll_entry(struct pnx4008_dma_ll *,
-				       struct pnx4008_dma_ch_ctrl *);
-
-#endif				/* _ASM_ARCH_DMA_H */
diff --git a/include/asm-arm/arch-pnx4008/entry-macro.S b/include/asm-arm/arch-pnx4008/entry-macro.S
deleted file mode 100644
index f11731974e5d..000000000000
--- a/include/asm-arm/arch-pnx4008/entry-macro.S
+++ /dev/null
@@ -1,127 +0,0 @@
-/*
- * include/asm-arm/arch-pnx4008/entry-macro.S
- *
- * Low-level IRQ helper macros for PNX4008-based platforms
- *
- * 2005-2006 (c) MontaVista Software, Inc.
- * Author: Vitaly Wool <vwool@ru.mvista.com>
- * This file is licensed under  the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include "platform.h"
-
-#define IO_BASE         0xF0000000
-#define IO_ADDRESS(x)  (((((x) & 0xff000000) >> 4) | ((x) & 0xfffff)) | IO_BASE)
-
-#define INTRC_MASK			0x00
-#define INTRC_RAW_STAT			0x04
-#define INTRC_STAT			0x08
-#define INTRC_POLAR			0x0C
-#define INTRC_ACT_TYPE			0x10
-#define INTRC_TYPE			0x14
-
-#define SIC1_BASE_INT   32
-#define SIC2_BASE_INT   64
-
-		.macro	disable_fiq
-		.endm
-
-		.macro  get_irqnr_preamble, base, tmp
-		.endm
-
-		.macro  arch_ret_to_user, tmp1, tmp2
-		.endm
-
-		.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
-/* decode the MIC interrupt numbers */
-		ldr	\base, =IO_ADDRESS(PNX4008_INTCTRLMIC_BASE)
-		ldr	\irqstat, [\base, #INTRC_STAT]
-
-		cmp	\irqstat,#1<<16
-		movhs	\irqnr,#16
-		movlo	\irqnr,#0
-		movhs	\irqstat,\irqstat,lsr#16
-		cmp	\irqstat,#1<<8
-		addhs	\irqnr,\irqnr,#8
-		movhs	\irqstat,\irqstat,lsr#8
-		cmp	\irqstat,#1<<4
-		addhs	\irqnr,\irqnr,#4
-		movhs	\irqstat,\irqstat,lsr#4
-		cmp	\irqstat,#1<<2
-		addhs	\irqnr,\irqnr,#2
-		movhs	\irqstat,\irqstat,lsr#2
-		cmp	\irqstat,#1<<1
-		addhs	\irqnr,\irqnr,#1
-
-/* was there an interrupt ? if not then drop out with EQ status */
-		teq	\irqstat,#0
-		beq	1003f
-
-/* and now check for extended IRQ reasons */
-		cmp	\irqnr,#1
-		bls	1003f
-		cmp	\irqnr,#30
-		blo	1002f
-
-/* IRQ 31,30  : High priority cascade IRQ handle */
-/* read the correct SIC */
-/* decoding status after compare : eq is 30 (SIC1) , ne is 31 (SIC2) */
-/* set the base IRQ number */
-		ldreq	\base, =IO_ADDRESS(PNX4008_INTCTRLSIC1_BASE)
-		moveq  \irqnr,#SIC1_BASE_INT
-		ldrne	\base, =IO_ADDRESS(PNX4008_INTCTRLSIC2_BASE)
-		movne   \irqnr,#SIC2_BASE_INT
-		ldr	\irqstat, [\base, #INTRC_STAT]
-		ldr	\tmp,	  [\base, #INTRC_TYPE]
-/* and with inverted mask : low priority interrupts  */
-		and	\irqstat,\irqstat,\tmp
-		b	1004f
-
-1003:
-/* IRQ 1,0  : Low priority cascade IRQ handle */
-/* read the correct SIC */
-/* decoding status after compare : eq is 1 (SIC2) , ne is 0 (SIC1)*/
-/* read the correct SIC */
-/* set the base IRQ number  */
-		ldrne	\base, =IO_ADDRESS(PNX4008_INTCTRLSIC1_BASE)
-		movne   \irqnr,#SIC1_BASE_INT
-		ldreq	\base, =IO_ADDRESS(PNX4008_INTCTRLSIC2_BASE)
-		moveq   \irqnr,#SIC2_BASE_INT
-		ldr	\irqstat, [\base, #INTRC_STAT]
-		ldr	\tmp,	  [\base, #INTRC_TYPE]
-/* and with inverted mask : low priority interrupts  */
-		bic	\irqstat,\irqstat,\tmp
-
-1004:
-
-		cmp	\irqstat,#1<<16
-		addhs	\irqnr,\irqnr,#16
-		movhs	\irqstat,\irqstat,lsr#16
-		cmp	\irqstat,#1<<8
-		addhs	\irqnr,\irqnr,#8
-		movhs	\irqstat,\irqstat,lsr#8
-		cmp	\irqstat,#1<<4
-		addhs	\irqnr,\irqnr,#4
-		movhs	\irqstat,\irqstat,lsr#4
-		cmp	\irqstat,#1<<2
-		addhs	\irqnr,\irqnr,#2
-		movhs	\irqstat,\irqstat,lsr#2
-		cmp	\irqstat,#1<<1
-		addhs	\irqnr,\irqnr,#1
-
-
-/* is irqstat not zero */
-
-1002:
-/* we assert that irqstat is not equal to zero and return ne status if true*/
-		teq	\irqstat,#0
-1003:
-		.endm
-
-
-		.macro	irq_prio_table
-		.endm
-
-
diff --git a/include/asm-arm/arch-pnx4008/gpio.h b/include/asm-arm/arch-pnx4008/gpio.h
deleted file mode 100644
index d01bf83d55c2..000000000000
--- a/include/asm-arm/arch-pnx4008/gpio.h
+++ /dev/null
@@ -1,241 +0,0 @@
-/*
- * include/asm-arm/arch-pnx4008/gpio.h
- *
- * PNX4008 GPIO driver - header file
- *
- * Author: Dmitry Chigirev <source@mvista.com>
- *
- * Based on reference code by Iwo Mergler and Z.Tabaaloute from Philips:
- * Copyright (c) 2005 Koninklijke Philips Electronics N.V.
- *
- * 2005 (c) MontaVista Software, Inc. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-
-#ifndef _PNX4008_GPIO_H_
-#define _PNX4008_GPIO_H_
-
-
-/* Block numbers */
-#define GPIO_IN		(0)
-#define GPIO_OUT		(0x100)
-#define GPIO_BID		(0x200)
-#define GPIO_RAM		(0x300)
-#define GPIO_MUX		(0x400)
-
-#define GPIO_TYPE_MASK(K) ((K) & 0x700)
-
-/* INPUT GPIOs */
-/* GPI */
-#define GPI_00		(GPIO_IN | 0)
-#define GPI_01		(GPIO_IN | 1)
-#define GPI_02   	(GPIO_IN | 2)
-#define GPI_03 	 	(GPIO_IN | 3)
-#define GPI_04   	(GPIO_IN | 4)
-#define GPI_05   	(GPIO_IN | 5)
-#define GPI_06   	(GPIO_IN | 6)
-#define GPI_07   	(GPIO_IN | 7)
-#define GPI_08   	(GPIO_IN | 8)
-#define GPI_09   	(GPIO_IN | 9)
-#define U1_RX 		(GPIO_IN | 15)
-#define U2_HTCS 	(GPIO_IN | 16)
-#define U2_RX	 	(GPIO_IN | 17)
-#define U3_RX		(GPIO_IN | 18)
-#define U4_RX		(GPIO_IN | 19)
-#define U5_RX		(GPIO_IN | 20)
-#define U6_IRRX 	(GPIO_IN | 21)
-#define U7_HCTS 	(GPIO_IN | 22)
-#define U7_RX		(GPIO_IN | 23)
-/* MISC IN */
-#define SPI1_DATIN	(GPIO_IN | 25)
-#define DISP_SYNC	(GPIO_IN | 26)
-#define SPI2_DATIN	(GPIO_IN | 27)
-#define GPI_11  	(GPIO_IN | 28)
-
-#define GPIO_IN_MASK   0x1eff83ff
-
-/* OUTPUT GPIOs */
-/* GPO */
-#define GPO_00		(GPIO_OUT | 0)
-#define GPO_01   	(GPIO_OUT | 1)
-#define GPO_02   	(GPIO_OUT | 2)
-#define GPO_03 	 	(GPIO_OUT | 3)
-#define GPO_04   	(GPIO_OUT | 4)
-#define GPO_05   	(GPIO_OUT | 5)
-#define GPO_06   	(GPIO_OUT | 6)
-#define GPO_07   	(GPIO_OUT | 7)
-#define GPO_08		(GPIO_OUT | 8)
-#define GPO_09   	(GPIO_OUT | 9)
-#define GPO_10   	(GPIO_OUT | 10)
-#define GPO_11 	 	(GPIO_OUT | 11)
-#define GPO_12   	(GPIO_OUT | 12)
-#define GPO_13   	(GPIO_OUT | 13)
-#define GPO_14   	(GPIO_OUT | 14)
-#define GPO_15   	(GPIO_OUT | 15)
-#define GPO_16  	(GPIO_OUT | 16)
-#define GPO_17 	 	(GPIO_OUT | 17)
-#define GPO_18   	(GPIO_OUT | 18)
-#define GPO_19   	(GPIO_OUT | 19)
-#define GPO_20   	(GPIO_OUT | 20)
-#define GPO_21   	(GPIO_OUT | 21)
-#define GPO_22   	(GPIO_OUT | 22)
-#define GPO_23   	(GPIO_OUT | 23)
-
-#define GPIO_OUT_MASK   0xffffff
-
-/* BIDIRECTIONAL GPIOs */
-/* RAM pins */
-#define RAM_D19		(GPIO_RAM | 0)
-#define RAM_D20  	(GPIO_RAM | 1)
-#define RAM_D21  	(GPIO_RAM | 2)
-#define RAM_D22 	(GPIO_RAM | 3)
-#define RAM_D23  	(GPIO_RAM | 4)
-#define RAM_D24  	(GPIO_RAM | 5)
-#define RAM_D25  	(GPIO_RAM | 6)
-#define RAM_D26  	(GPIO_RAM | 7)
-#define RAM_D27		(GPIO_RAM | 8)
-#define RAM_D28  	(GPIO_RAM | 9)
-#define RAM_D29  	(GPIO_RAM | 10)
-#define RAM_D30 	(GPIO_RAM | 11)
-#define RAM_D31  	(GPIO_RAM | 12)
-
-#define GPIO_RAM_MASK   0x1fff
-
-/* I/O pins */
-#define GPIO_00  	(GPIO_BID | 25)
-#define GPIO_01 	(GPIO_BID | 26)
-#define GPIO_02  	(GPIO_BID | 27)
-#define GPIO_03  	(GPIO_BID | 28)
-#define GPIO_04 	(GPIO_BID | 29)
-#define GPIO_05  	(GPIO_BID | 30)
-
-#define GPIO_BID_MASK   0x7e000000
-
-/* Non-GPIO multiplexed PIOs. For multiplexing with GPIO, please use GPIO macros */
-#define GPIO_SDRAM_SEL 	(GPIO_MUX | 3)
-
-#define GPIO_MUX_MASK   0x8
-
-/* Extraction/assembly macros */
-#define GPIO_BIT_MASK(K) ((K) & 0x1F)
-#define GPIO_BIT(K) (1 << GPIO_BIT_MASK(K))
-#define GPIO_ISMUX(K) ((GPIO_TYPE_MASK(K) == GPIO_MUX) && (GPIO_BIT(K) & GPIO_MUX_MASK))
-#define GPIO_ISRAM(K) ((GPIO_TYPE_MASK(K) == GPIO_RAM) && (GPIO_BIT(K) & GPIO_RAM_MASK))
-#define GPIO_ISBID(K) ((GPIO_TYPE_MASK(K) == GPIO_BID) && (GPIO_BIT(K) & GPIO_BID_MASK))
-#define GPIO_ISOUT(K) ((GPIO_TYPE_MASK(K) == GPIO_OUT) && (GPIO_BIT(K) & GPIO_OUT_MASK))
-#define GPIO_ISIN(K)  ((GPIO_TYPE_MASK(K) == GPIO_IN) && (GPIO_BIT(K) & GPIO_IN_MASK))
-
-/* Start Enable Pin Interrupts - table 58 page 66 */
-
-#define SE_PIN_BASE_INT   32
-
-#define SE_U7_RX_INT            63
-#define SE_U7_HCTS_INT          62
-#define SE_BT_CLKREQ_INT        61
-#define SE_U6_IRRX_INT          60
-/*59 unused*/
-#define SE_U5_RX_INT            58
-#define SE_GPI_11_INT           57
-#define SE_U3_RX_INT            56
-#define SE_U2_HCTS_INT          55
-#define SE_U2_RX_INT            54
-#define SE_U1_RX_INT            53
-#define SE_DISP_SYNC_INT        52
-/*51 unused*/
-#define SE_SDIO_INT_N           50
-#define SE_MSDIO_START_INT      49
-#define SE_GPI_06_INT           48
-#define SE_GPI_05_INT           47
-#define SE_GPI_04_INT           46
-#define SE_GPI_03_INT           45
-#define SE_GPI_02_INT           44
-#define SE_GPI_01_INT           43
-#define SE_GPI_00_INT           42
-#define SE_SYSCLKEN_PIN_INT     41
-#define SE_SPI1_DATAIN_INT      40
-#define SE_GPI_07_INT           39
-#define SE_SPI2_DATAIN_INT      38
-#define SE_GPI_10_INT           37
-#define SE_GPI_09_INT           36
-#define SE_GPI_08_INT           35
-/*34-32 unused*/
-
-/* Start Enable Internal Interrupts - table 57 page 65 */
-
-#define SE_INT_BASE_INT   0
-
-#define SE_TS_IRQ               31
-#define SE_TS_P_INT             30
-#define SE_TS_AUX_INT           29
-/*27-28 unused*/
-#define SE_USB_AHB_NEED_CLK_INT 26
-#define SE_MSTIMER_INT          25
-#define SE_RTC_INT              24
-#define SE_USB_NEED_CLK_INT     23
-#define SE_USB_INT              22
-#define SE_USB_I2C_INT          21
-#define SE_USB_OTG_TIMER_INT    20
-#define SE_USB_OTG_ATX_INT_N    19
-/*18 unused*/
-#define SE_DSP_GPIO4_INT        17
-#define SE_KEY_IRQ              16
-#define SE_DSP_SLAVEPORT_INT    15
-#define SE_DSP_GPIO1_INT        14
-#define SE_DSP_GPIO0_INT        13
-#define SE_DSP_AHB_INT          12
-/*11-6 unused*/
-#define SE_GPIO_05_INT          5
-#define SE_GPIO_04_INT          4
-#define SE_GPIO_03_INT          3
-#define SE_GPIO_02_INT          2
-#define SE_GPIO_01_INT          1
-#define SE_GPIO_00_INT          0
-
-#define START_INT_REG_BIT(irq) (1<<((irq)&0x1F))
-
-#define START_INT_ER_REG(irq)     IO_ADDRESS((PNX4008_PWRMAN_BASE + 0x20 + (((irq)&(0x1<<5))>>1)))
-#define START_INT_RSR_REG(irq)    IO_ADDRESS((PNX4008_PWRMAN_BASE + 0x24 + (((irq)&(0x1<<5))>>1)))
-#define START_INT_SR_REG(irq)     IO_ADDRESS((PNX4008_PWRMAN_BASE + 0x28 + (((irq)&(0x1<<5))>>1)))
-#define START_INT_APR_REG(irq)    IO_ADDRESS((PNX4008_PWRMAN_BASE + 0x2C + (((irq)&(0x1<<5))>>1)))
-
-extern int pnx4008_gpio_register_pin(unsigned short pin);
-extern int pnx4008_gpio_unregister_pin(unsigned short pin);
-extern unsigned long pnx4008_gpio_read_pin(unsigned short pin);
-extern int pnx4008_gpio_write_pin(unsigned short pin, int output);
-extern int pnx4008_gpio_set_pin_direction(unsigned short pin, int output);
-extern int pnx4008_gpio_read_pin_direction(unsigned short pin);
-extern int pnx4008_gpio_set_pin_mux(unsigned short pin, int output);
-extern int pnx4008_gpio_read_pin_mux(unsigned short pin);
-
-static inline void start_int_umask(u8 irq)
-{
-	__raw_writel(__raw_readl(START_INT_ER_REG(irq)) |
-		     START_INT_REG_BIT(irq), START_INT_ER_REG(irq));
-}
-
-static inline void start_int_mask(u8 irq)
-{
-	__raw_writel(__raw_readl(START_INT_ER_REG(irq)) &
-		     ~START_INT_REG_BIT(irq), START_INT_ER_REG(irq));
-}
-
-static inline void start_int_ack(u8 irq)
-{
-	__raw_writel(START_INT_REG_BIT(irq), START_INT_RSR_REG(irq));
-}
-
-static inline void start_int_set_falling_edge(u8 irq)
-{
-	__raw_writel(__raw_readl(START_INT_APR_REG(irq)) &
-		     ~START_INT_REG_BIT(irq), START_INT_APR_REG(irq));
-}
-
-static inline void start_int_set_rising_edge(u8 irq)
-{
-	__raw_writel(__raw_readl(START_INT_APR_REG(irq)) |
-		     START_INT_REG_BIT(irq), START_INT_APR_REG(irq));
-}
-
-#endif				/* _PNX4008_GPIO_H_ */
diff --git a/include/asm-arm/arch-pnx4008/hardware.h b/include/asm-arm/arch-pnx4008/hardware.h
deleted file mode 100644
index a4410397a921..000000000000
--- a/include/asm-arm/arch-pnx4008/hardware.h
+++ /dev/null
@@ -1,32 +0,0 @@
-/*
- * linux/include/asm-arm/arch-pnx4008/hardware.h
- *
- * Copyright (c) 2005 MontaVista Software, Inc. <source@mvista.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-#ifndef __ASM_ARCH_HARDWARE_H
-#define __ASM_ARCH_HARDWARE_H
-
-#include <asm/sizes.h>
-#include <asm/arch/platform.h>
-
-/* Start of virtual addresses for IO devices */
-#define IO_BASE         0xF0000000
-
-/* This macro relies on fact that for all HW i/o addresses bits 20-23 are 0 */
-#define IO_ADDRESS(x)  (((((x) & 0xff000000) >> 4) | ((x) & 0xfffff)) | IO_BASE)
-
-#endif
diff --git a/include/asm-arm/arch-pnx4008/io.h b/include/asm-arm/arch-pnx4008/io.h
deleted file mode 100644
index 29ee43955c52..000000000000
--- a/include/asm-arm/arch-pnx4008/io.h
+++ /dev/null
@@ -1,21 +0,0 @@
-
-/*
- *  include/asm-arm/arch-pnx4008/io.h
- *
- * Author: Dmitry Chigirev <chigirev@ru.mvista.com>
- *
- * 2005 (c) MontaVista Software, Inc. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-
-#ifndef __ASM_ARM_ARCH_IO_H
-#define __ASM_ARM_ARCH_IO_H
-
-#define IO_SPACE_LIMIT 0xffffffff
-
-#define __io(a)			((void __iomem *)(a))
-#define __mem_pci(a)		(a)
-
-#endif
diff --git a/include/asm-arm/arch-pnx4008/irq.h b/include/asm-arm/arch-pnx4008/irq.h
deleted file mode 100644
index fabff5dc337f..000000000000
--- a/include/asm-arm/arch-pnx4008/irq.h
+++ /dev/null
@@ -1,42 +0,0 @@
-/*
- * include/asm-arm/arch-pnx4008/irq.h
- *
- * PNX4008 IRQ controller driver - header file
- * this one is used in entry-arnv.S as well so it cannot contain C code
- *
- * Copyright (c) 2005 Philips Semiconductors
- * Copyright (c) 2005 MontaVista Software, Inc.
- *
- *  This program is free software; you can redistribute  it and/or modify it
- *  under  the terms of  the GNU General  Public License as published by the
- *  Free Software Foundation;  either version 2 of the  License, or (at your
- *  option) any later version.
- */
-#ifndef __PNX4008_IRQ_H__
-#define __PNX4008_IRQ_H__
-
-#define MIC_VA_BASE             IO_ADDRESS(PNX4008_INTCTRLMIC_BASE)
-#define SIC1_VA_BASE            IO_ADDRESS(PNX4008_INTCTRLSIC1_BASE)
-#define SIC2_VA_BASE            IO_ADDRESS(PNX4008_INTCTRLSIC2_BASE)
-
-/* Manual: Chapter 20, page 195 */
-
-#define INTC_BIT(irq) (1<< ((irq) & 0x1F))
-
-#define INTC_ER(irq)    IO_ADDRESS((PNX4008_INTCTRLMIC_BASE + 0x0 + (((irq)&(0x3<<5))<<9)))
-#define INTC_RSR(irq)   IO_ADDRESS((PNX4008_INTCTRLMIC_BASE + 0x4 + (((irq)&(0x3<<5))<<9)))
-#define INTC_SR(irq)    IO_ADDRESS((PNX4008_INTCTRLMIC_BASE + 0x8 + (((irq)&(0x3<<5))<<9)))
-#define INTC_APR(irq)   IO_ADDRESS((PNX4008_INTCTRLMIC_BASE + 0xC + (((irq)&(0x3<<5))<<9)))
-#define INTC_ATR(irq)   IO_ADDRESS((PNX4008_INTCTRLMIC_BASE + 0x10 + (((irq)&(0x3<<5))<<9)))
-#define INTC_ITR(irq)   IO_ADDRESS((PNX4008_INTCTRLMIC_BASE + 0x14 + (((irq)&(0x3<<5))<<9)))
-
-#define START_INT_REG_BIT(irq) (1<<((irq)&0x1F))
-
-#define START_INT_ER_REG(irq)     IO_ADDRESS((PNX4008_PWRMAN_BASE + 0x20 + (((irq)&(0x1<<5))>>1)))
-#define START_INT_RSR_REG(irq)    IO_ADDRESS((PNX4008_PWRMAN_BASE + 0x24 + (((irq)&(0x1<<5))>>1)))
-#define START_INT_SR_REG(irq)     IO_ADDRESS((PNX4008_PWRMAN_BASE + 0x28 + (((irq)&(0x1<<5))>>1)))
-#define START_INT_APR_REG(irq)    IO_ADDRESS((PNX4008_PWRMAN_BASE + 0x2C + (((irq)&(0x1<<5))>>1)))
-
-extern void __init pnx4008_init_irq(void);
-
-#endif /* __PNX4008_IRQ_H__ */
diff --git a/include/asm-arm/arch-pnx4008/irqs.h b/include/asm-arm/arch-pnx4008/irqs.h
deleted file mode 100644
index 13ec7ed0f501..000000000000
--- a/include/asm-arm/arch-pnx4008/irqs.h
+++ /dev/null
@@ -1,215 +0,0 @@
-/*
- * include/asm-arm/arch-pnx4008/irqs.h
- *
- * PNX4008 IRQ controller driver - header file
- *
- * Author: Dmitry Chigirev <source@mvista.com>
- *
- * 2005 (c) MontaVista Software, Inc. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-#ifndef __PNX4008_IRQS_h__
-#define __PNX4008_IRQS_h__
-
-#define NR_IRQS         96
-
-/*Manual: table 259, page 199*/
-
-/*SUB2 Interrupt Routing (SIC2)*/
-
-#define SIC2_BASE_INT   64
-
-#define CLK_SWITCH_ARM_INT 95	/*manual: Clkswitch ARM  */
-#define CLK_SWITCH_DSP_INT 94	/*manual: ClkSwitch DSP  */
-#define CLK_SWITCH_AUD_INT 93	/*manual: Clkswitch AUD  */
-#define GPI_06_INT         92
-#define GPI_05_INT         91
-#define GPI_04_INT         90
-#define GPI_03_INT         89
-#define GPI_02_INT         88
-#define GPI_01_INT         87
-#define GPI_00_INT         86
-#define BT_CLKREQ_INT      85
-#define SPI1_DATIN_INT     84
-#define U5_RX_INT          83
-#define SDIO_INT_N         82
-#define CAM_HS_INT         81
-#define CAM_VS_INT         80
-#define GPI_07_INT         79
-#define DISP_SYNC_INT      78
-#define DSP_INT8           77
-#define U7_HCTS_INT        76
-#define GPI_10_INT         75
-#define GPI_09_INT         74
-#define GPI_08_INT         73
-#define DSP_INT7           72
-#define U2_HCTS_INT        71
-#define SPI2_DATIN_INT     70
-#define GPIO_05_INT        69
-#define GPIO_04_INT        68
-#define GPIO_03_INT        67
-#define GPIO_02_INT        66
-#define GPIO_01_INT        65
-#define GPIO_00_INT        64
-
-/*Manual: table 258, page 198*/
-
-/*SUB1 Interrupt Routing (SIC1)*/
-
-#define SIC1_BASE_INT   32
-
-#define USB_I2C_INT        63
-#define USB_DEV_HP_INT     62
-#define USB_DEV_LP_INT     61
-#define USB_DEV_DMA_INT    60
-#define USB_HOST_INT       59
-#define USB_OTG_ATX_INT_N  58
-#define USB_OTG_TIMER_INT  57
-#define SW_INT             56
-#define SPI1_INT           55
-#define KEY_IRQ            54
-#define DSP_M_INT          53
-#define RTC_INT            52
-#define I2C_1_INT          51
-#define I2C_2_INT          50
-#define PLL1_LOCK_INT      49
-#define PLL2_LOCK_INT      48
-#define PLL3_LOCK_INT      47
-#define PLL4_LOCK_INT      46
-#define PLL5_LOCK_INT      45
-#define SPI2_INT           44
-#define DSP_INT1           43
-#define DSP_INT2           42
-#define DSP_TDM_INT2       41
-#define TS_AUX_INT         40
-#define TS_IRQ             39
-#define TS_P_INT           38
-#define UOUT1_TO_PAD_INT   37
-#define GPI_11_INT         36
-#define DSP_INT4           35
-#define JTAG_COMM_RX_INT   34
-#define JTAG_COMM_TX_INT   33
-#define DSP_INT3           32
-
-/*Manual: table 257, page 197*/
-
-/*MAIN Interrupt Routing*/
-
-#define MAIN_BASE_INT   0
-
-#define SUB2_FIQ_N         31	/*active low */
-#define SUB1_FIQ_N         30	/*active low */
-#define JPEG_INT           29
-#define DMA_INT            28
-#define MSTIMER_INT        27
-#define IIR1_INT           26
-#define IIR2_INT           25
-#define IIR7_INT           24
-#define DSP_TDM_INT0       23
-#define DSP_TDM_INT1       22
-#define DSP_P_INT          21
-#define DSP_INT0           20
-#define DUM_INT            19
-#define UOUT0_TO_PAD_INT   18
-#define MP4_ENC_INT        17
-#define MP4_DEC_INT        16
-#define SD0_INT            15
-#define MBX_INT            14
-#define SD1_INT            13
-#define MS_INT_N           12
-#define FLASH_INT          11 /*NAND*/
-#define IIR6_INT           10
-#define IIR5_INT           9
-#define IIR4_INT           8
-#define IIR3_INT           7
-#define WATCH_INT          6
-#define HSTIMER_INT        5
-#define ARCH_TIMER_IRQ     HSTIMER_INT
-#define CAM_INT            4
-#define PRNG_INT           3
-#define CRYPTO_INT         2
-#define SUB2_IRQ_N         1	/*active low */
-#define SUB1_IRQ_N         0	/*active low */
-
-#define PNX4008_IRQ_TYPES \
-{                                           /*IRQ #'s: */         \
-IRQT_LOW,  IRQT_LOW,  IRQT_LOW,  IRQT_HIGH, /*  0, 1, 2, 3 */     \
-IRQT_LOW,  IRQT_HIGH, IRQT_HIGH, IRQT_HIGH, /*  4, 5, 6, 7 */     \
-IRQT_HIGH, IRQT_HIGH, IRQT_HIGH, IRQT_HIGH, /*  8, 9,10,11 */     \
-IRQT_LOW,  IRQT_HIGH, IRQT_HIGH, IRQT_HIGH, /* 12,13,14,15 */     \
-IRQT_HIGH, IRQT_HIGH, IRQT_HIGH, IRQT_HIGH, /* 16,17,18,19 */     \
-IRQT_HIGH, IRQT_HIGH, IRQT_HIGH, IRQT_HIGH, /* 20,21,22,23 */     \
-IRQT_HIGH, IRQT_HIGH, IRQT_HIGH, IRQT_HIGH, /* 24,25,26,27 */     \
-IRQT_HIGH, IRQT_HIGH, IRQT_LOW,  IRQT_LOW,  /* 28,29,30,31 */     \
-IRQT_HIGH, IRQT_LOW,  IRQT_HIGH, IRQT_HIGH, /* 32,33,34,35 */     \
-IRQT_HIGH, IRQT_HIGH, IRQT_FALLING, IRQT_HIGH, /* 36,37,38,39 */  \
-IRQT_HIGH, IRQT_HIGH, IRQT_HIGH, IRQT_HIGH, /* 40,41,42,43 */     \
-IRQT_HIGH, IRQT_HIGH, IRQT_HIGH, IRQT_HIGH, /* 44,45,46,47 */     \
-IRQT_HIGH, IRQT_HIGH, IRQT_LOW,  IRQT_LOW,  /* 48,49,50,51 */     \
-IRQT_HIGH, IRQT_HIGH, IRQT_HIGH, IRQT_HIGH, /* 52,53,54,55 */     \
-IRQT_HIGH, IRQT_HIGH, IRQT_LOW,  IRQT_HIGH, /* 56,57,58,59 */     \
-IRQT_HIGH, IRQT_HIGH, IRQT_HIGH, IRQT_HIGH, /* 60,61,62,63 */     \
-IRQT_HIGH, IRQT_HIGH, IRQT_HIGH, IRQT_HIGH, /* 64,65,66,67 */     \
-IRQT_HIGH, IRQT_HIGH, IRQT_HIGH, IRQT_HIGH, /* 68,69,70,71 */     \
-IRQT_HIGH, IRQT_HIGH, IRQT_HIGH, IRQT_HIGH, /* 72,73,74,75 */     \
-IRQT_HIGH, IRQT_HIGH, IRQT_HIGH, IRQT_HIGH, /* 76,77,78,79 */     \
-IRQT_HIGH, IRQT_HIGH, IRQT_HIGH, IRQT_HIGH, /* 80,81,82,83 */     \
-IRQT_HIGH, IRQT_HIGH, IRQT_HIGH, IRQT_HIGH, /* 84,85,86,87 */     \
-IRQT_HIGH, IRQT_HIGH, IRQT_HIGH, IRQT_HIGH, /* 88,89,90,91 */     \
-IRQT_HIGH, IRQT_HIGH, IRQT_HIGH, IRQT_HIGH, /* 92,93,94,95 */     \
-}
-
-/* Start Enable Pin Interrupts - table 58 page 66 */
-
-#define SE_PIN_BASE_INT   32
-
-#define SE_U7_RX_INT            63
-#define SE_U7_HCTS_INT          62
-#define SE_BT_CLKREQ_INT        61
-#define SE_U6_IRRX_INT          60
-/*59 unused*/
-#define SE_U5_RX_INT            58
-#define SE_GPI_11_INT           57
-#define SE_U3_RX_INT            56
-#define SE_U2_HCTS_INT          55
-#define SE_U2_RX_INT            54
-#define SE_U1_RX_INT            53
-#define SE_DISP_SYNC_INT        52
-/*51 unused*/
-#define SE_SDIO_INT_N           50
-#define SE_MSDIO_START_INT      49
-#define SE_GPI_06_INT           48
-#define SE_GPI_05_INT           47
-#define SE_GPI_04_INT           46
-#define SE_GPI_03_INT           45
-#define SE_GPI_02_INT           44
-#define SE_GPI_01_INT           43
-#define SE_GPI_00_INT           42
-#define SE_SYSCLKEN_PIN_INT     41
-#define SE_SPI1_DATAIN_INT      40
-#define SE_GPI_07_INT           39
-#define SE_SPI2_DATAIN_INT      38
-#define SE_GPI_10_INT           37
-#define SE_GPI_09_INT           36
-#define SE_GPI_08_INT           35
-/*34-32 unused*/
-
-/* Start Enable Internal Interrupts - table 57 page 65 */
-
-#define SE_INT_BASE_INT   0
-
-#define SE_TS_IRQ               31
-#define SE_TS_P_INT             30
-#define SE_TS_AUX_INT           29
-/*27-28 unused*/
-#define SE_USB_AHB_NEED_CLK_INT 26
-#define SE_MSTIMER_INT          25
-#define SE_RTC_INT              24
-#define SE_USB_NEED_CLK_INT     23
-#define SE_USB_INT              22
-#define SE_USB_I2C_INT          21
-#define SE_USB_OTG_TIMER_INT    20
-
-#endif /* __PNX4008_IRQS_h__ */
diff --git a/include/asm-arm/arch-pnx4008/memory.h b/include/asm-arm/arch-pnx4008/memory.h
deleted file mode 100644
index 0d8268a95261..000000000000
--- a/include/asm-arm/arch-pnx4008/memory.h
+++ /dev/null
@@ -1,24 +0,0 @@
-/*
- * linux/include/asm-arm/arch-pnx4008/memory.h
- *
- * Copyright (c) 2005 Philips Semiconductors
- * Copyright (c) 2005 MontaVista Software, Inc.
- *
- *  This program is free software; you can redistribute  it and/or modify it
- *  under  the terms of  the GNU General  Public License as published by the
- *  Free Software Foundation;  either version 2 of the  License, or (at your
- *  option) any later version.
- */
-
-#ifndef __ASM_ARCH_MEMORY_H
-#define __ASM_ARCH_MEMORY_H
-
-/*
- * Physical DRAM offset.
- */
-#define PHYS_OFFSET     (0x80000000)
-
-#define __virt_to_bus(x) ((x) - PAGE_OFFSET + PHYS_OFFSET)
-#define __bus_to_virt(x) ((x) + PAGE_OFFSET - PHYS_OFFSET)
-
-#endif
diff --git a/include/asm-arm/arch-pnx4008/param.h b/include/asm-arm/arch-pnx4008/param.h
deleted file mode 100644
index 95d5f547b416..000000000000
--- a/include/asm-arm/arch-pnx4008/param.h
+++ /dev/null
@@ -1,21 +0,0 @@
-/*
- *  linux/include/asm-arm/arch-pnx4008/param.h
- *
- *  Copyright (C) 1999 ARM Limited
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#define HZ 100
diff --git a/include/asm-arm/arch-pnx4008/platform.h b/include/asm-arm/arch-pnx4008/platform.h
deleted file mode 100644
index 2613c7c669b1..000000000000
--- a/include/asm-arm/arch-pnx4008/platform.h
+++ /dev/null
@@ -1,69 +0,0 @@
-/*
- * include/asm-arm/arch-pnx4008/platform.h
- *
- * PNX4008 Base addresses - header file
- *
- * Author: Dmitry Chigirev <source@mvista.com>
- *
- * Based on reference code received from Philips:
- * Copyright (C) 2003 Philips Semiconductors
- *
- * 2005 (c) MontaVista Software, Inc. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-
-
-#ifndef __ASM_ARCH_PLATFORM_H__
-#define __ASM_ARCH_PLATFORM_H__
-
-#define PNX4008_IRAM_BASE		0x08000000
-#define PNX4008_IRAM_SIZE		0x00010000
-#define PNX4008_YUV_SLAVE_BASE		0x10000000
-#define PNX4008_DUM_SLAVE_BASE		0x18000000
-#define PNX4008_NDF_FLASH_BASE		0x20020000
-#define PNX4008_SPI1_BASE		0x20088000
-#define PNX4008_SPI2_BASE		0x20090000
-#define PNX4008_SD_CONFIG_BASE		0x20098000
-#define PNX4008_FLASH_DATA		0x200B0000
-#define PNX4008_MLC_FLASH_BASE		0x200B8000
-#define PNX4008_JPEG_CONFIG_BASE	0x300A0000
-#define PNX4008_DMA_CONFIG_BASE		0x31000000
-#define PNX4008_USB_CONFIG_BASE		0x31020000
-#define PNX4008_SDRAM_CFG_BASE		0x31080000
-#define PNX4008_AHB2FAB_BASE		0x40000000
-#define PNX4008_PWRMAN_BASE		0x40004000
-#define PNX4008_INTCTRLMIC_BASE		0x40008000
-#define PNX4008_INTCTRLSIC1_BASE	0x4000C000
-#define PNX4008_INTCTRLSIC2_BASE	0x40010000
-#define PNX4008_HSUART1_BASE		0x40014000
-#define PNX4008_HSUART2_BASE		0x40018000
-#define PNX4008_HSUART7_BASE		0x4001C000
-#define PNX4008_RTC_BASE		0x40024000
-#define PNX4008_PIO_BASE		0x40028000
-#define PNX4008_MSTIMER_BASE		0x40034000
-#define PNX4008_HSTIMER_BASE		0x40038000
-#define PNX4008_WDOG_BASE		0x4003C000
-#define PNX4008_DEBUG_BASE		0x40040000
-#define PNX4008_TOUCH1_BASE		0x40048000
-#define PNX4008_KEYSCAN_BASE		0x40050000
-#define PNX4008_UARTCTRL_BASE		0x40054000
-#define PNX4008_PWM_BASE		0x4005C000
-#define PNX4008_UART3_BASE		0x40080000
-#define PNX4008_UART4_BASE		0x40088000
-#define PNX4008_UART5_BASE		0x40090000
-#define PNX4008_UART6_BASE		0x40098000
-#define PNX4008_I2C1_BASE		0x400A0000
-#define PNX4008_I2C2_BASE		0x400A8000
-#define PNX4008_MAGICGATE_BASE		0x400B0000
-#define PNX4008_DUMCONF_BASE		0x400B8000
-#define PNX4008_DUM_MAINCFG_BASE       	0x400BC000
-#define PNX4008_DSP_BASE		0x400C0000
-#define PNX4008_PROFCOUNTER_BASE	0x400C8000
-#define PNX4008_CRYPTO_BASE		0x400D0000
-#define PNX4008_CAMIFCONF_BASE		0x400D8000
-#define PNX4008_YUV2RGB_BASE		0x400E0000
-#define PNX4008_AUDIOCONFIG_BASE	0x400E8000
-
-#endif
diff --git a/include/asm-arm/arch-pnx4008/pm.h b/include/asm-arm/arch-pnx4008/pm.h
deleted file mode 100644
index bac1634cb3e0..000000000000
--- a/include/asm-arm/arch-pnx4008/pm.h
+++ /dev/null
@@ -1,33 +0,0 @@
-/*
- * include/asm-arm/arch-pnx4008/pm.h
- *
- * PNX4008 Power Management Routiness - header file
- *
- * Authors: Vitaly Wool, Dmitry Chigirev <source@mvista.com>
- *
- * 2005 (c) MontaVista Software, Inc. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-
-#ifndef __ASM_ARCH_PNX4008_PM_H
-#define __ASM_ARCH_PNX4008_PM_H
-
-#ifndef __ASSEMBLER__
-#include "irq.h"
-#include "irqs.h"
-#include "clock.h"
-
-extern void pnx4008_pm_idle(void);
-extern void pnx4008_pm_suspend(void);
-extern unsigned int pnx4008_cpu_suspend_sz;
-extern void pnx4008_cpu_suspend(void);
-extern unsigned int pnx4008_cpu_standby_sz;
-extern void pnx4008_cpu_standby(void);
-
-extern int pnx4008_startup_pll(struct clk *);
-extern int pnx4008_shutdown_pll(struct clk *);
-
-#endif				/* ASSEMBLER */
-#endif				/* __ASM_ARCH_PNX4008_PM_H */
diff --git a/include/asm-arm/arch-pnx4008/system.h b/include/asm-arm/arch-pnx4008/system.h
deleted file mode 100644
index 6e3da70ab107..000000000000
--- a/include/asm-arm/arch-pnx4008/system.h
+++ /dev/null
@@ -1,38 +0,0 @@
-/*
- * linux/include/asm-arm/arch-pnx4008/system.h
- *
- * Copyright (C) 2003 Philips Semiconductors
- * Copyright (C) 2005 MontaVista Software, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-#ifndef __ASM_ARCH_SYSTEM_H
-#define __ASM_ARCH_SYSTEM_H
-
-#include <asm/hardware.h>
-#include <asm/io.h>
-#include <asm/arch/platform.h>
-
-static void arch_idle(void)
-{
-	cpu_do_idle();
-}
-
-static inline void arch_reset(char mode)
-{
-	cpu_reset(0);
-}
-
-#endif
diff --git a/include/asm-arm/arch-pnx4008/timex.h b/include/asm-arm/arch-pnx4008/timex.h
deleted file mode 100644
index ee470a39089a..000000000000
--- a/include/asm-arm/arch-pnx4008/timex.h
+++ /dev/null
@@ -1,73 +0,0 @@
-/*
- * include/asm-arm/arch-pnx4008/timex.h
- *
- * PNX4008 timers header file
- *
- * Author: Dmitry Chigirev <source@mvista.com>
- *
- * 2005 (c) MontaVista Software, Inc. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-
-#ifndef __PNX4008_TIMEX_H
-#define __PNX4008_TIMEX_H
-
-#include <asm/hardware.h>
-#include <asm/io.h>
-
-#define CLOCK_TICK_RATE		1000000
-
-#define TICKS2USECS(x)	(x)
-
-/* MilliSecond Timer - Chapter 21 Page 202 */
-
-#define MSTIM_INT     IO_ADDRESS((PNX4008_MSTIMER_BASE + 0x0))
-#define MSTIM_CTRL    IO_ADDRESS((PNX4008_MSTIMER_BASE + 0x4))
-#define MSTIM_COUNTER IO_ADDRESS((PNX4008_MSTIMER_BASE + 0x8))
-#define MSTIM_MCTRL   IO_ADDRESS((PNX4008_MSTIMER_BASE + 0x14))
-#define MSTIM_MATCH0  IO_ADDRESS((PNX4008_MSTIMER_BASE + 0x18))
-#define MSTIM_MATCH1  IO_ADDRESS((PNX4008_MSTIMER_BASE + 0x1c))
-
-/* High Speed Timer - Chpater 22, Page 205 */
-
-#define HSTIM_INT     IO_ADDRESS((PNX4008_HSTIMER_BASE + 0x0))
-#define HSTIM_CTRL    IO_ADDRESS((PNX4008_HSTIMER_BASE + 0x4))
-#define HSTIM_COUNTER IO_ADDRESS((PNX4008_HSTIMER_BASE + 0x8))
-#define HSTIM_PMATCH  IO_ADDRESS((PNX4008_HSTIMER_BASE + 0xC))
-#define HSTIM_PCOUNT  IO_ADDRESS((PNX4008_HSTIMER_BASE + 0x10))
-#define HSTIM_MCTRL   IO_ADDRESS((PNX4008_HSTIMER_BASE + 0x14))
-#define HSTIM_MATCH0  IO_ADDRESS((PNX4008_HSTIMER_BASE + 0x18))
-#define HSTIM_MATCH1  IO_ADDRESS((PNX4008_HSTIMER_BASE + 0x1c))
-#define HSTIM_MATCH2  IO_ADDRESS((PNX4008_HSTIMER_BASE + 0x20))
-#define HSTIM_CCR     IO_ADDRESS((PNX4008_HSTIMER_BASE + 0x28))
-#define HSTIM_CR0     IO_ADDRESS((PNX4008_HSTIMER_BASE + 0x2C))
-#define HSTIM_CR1     IO_ADDRESS((PNX4008_HSTIMER_BASE + 0x30))
-
-/* IMPORTANT: both timers are UPCOUNTING */
-
-/* xSTIM_MCTRL bit definitions */
-#define MR0_INT        1
-#define RESET_COUNT0   (1<<1)
-#define STOP_COUNT0    (1<<2)
-#define MR1_INT        (1<<3)
-#define RESET_COUNT1   (1<<4)
-#define STOP_COUNT1    (1<<5)
-#define MR2_INT        (1<<6)
-#define RESET_COUNT2   (1<<7)
-#define STOP_COUNT2    (1<<8)
-
-/* xSTIM_CTRL bit definitions */
-#define COUNT_ENAB     1
-#define RESET_COUNT    (1<<1)
-#define DEBUG_EN       (1<<2)
-
-/* xSTIM_INT bit definitions */
-#define MATCH0_INT     1
-#define MATCH1_INT     (1<<1)
-#define MATCH2_INT     (1<<2)
-#define RTC_TICK0      (1<<4)
-#define RTC_TICK1      (1<<5)
-
-#endif
diff --git a/include/asm-arm/arch-pnx4008/uncompress.h b/include/asm-arm/arch-pnx4008/uncompress.h
deleted file mode 100644
index 8fa4d24b72b4..000000000000
--- a/include/asm-arm/arch-pnx4008/uncompress.h
+++ /dev/null
@@ -1,46 +0,0 @@
-/*
- *  linux/include/asm-arm/arch-pnx4008/uncompress.h
- *
- *  Copyright (C) 1999 ARM Limited
- *  Copyright (C) 2006 MontaVista Software, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#define UART5_BASE 0x40090000
-
-#define UART5_DR    (*(volatile unsigned char *) (UART5_BASE))
-#define UART5_FR    (*(volatile unsigned char *) (UART5_BASE + 18))
-
-static __inline__ void putc(char c)
-{
-	while (UART5_FR & (1 << 5))
-		barrier();
-
-	UART5_DR = c;
-}
-
-/*
- * This does not append a newline
- */
-static inline void flush(void)
-{
-}
-
-/*
- * nothing to do
- */
-#define arch_decomp_setup()
-#define arch_decomp_wdog()
diff --git a/include/asm-arm/arch-pnx4008/vmalloc.h b/include/asm-arm/arch-pnx4008/vmalloc.h
deleted file mode 100644
index 140d925f6f37..000000000000
--- a/include/asm-arm/arch-pnx4008/vmalloc.h
+++ /dev/null
@@ -1,20 +0,0 @@
-/*
- * include/asm-arm/arch-pnx4008/vmalloc.h
- *
- * Author: Vitaly Wool <source@mvista.com>
- *
- * 2006 (c) MontaVista Software, Inc. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-
-/*
- * Just any arbitrary offset to the start of the vmalloc VM area: the
- * current 8MB value just means that there will be a 8MB "hole" after the
- * physical memory until the kernel virtual memory starts.  That means that
- * any out-of-bounds memory accesses will hopefully be caught.
- * The vmalloc() routines leaves a hole of 4kB between each vmalloced
- * area for the same reason. ;)
- */
-#define VMALLOC_END       (PAGE_OFFSET + 0x10000000)
diff --git a/include/asm-arm/arch-pxa/debug-macro.S b/include/asm-arm/arch-pxa/debug-macro.S
deleted file mode 100644
index 9012cbc0ad8b..000000000000
--- a/include/asm-arm/arch-pxa/debug-macro.S
+++ /dev/null
@@ -1,25 +0,0 @@
-/* linux/include/asm-arm/arch-pxa/debug-macro.S
- *
- * Debugging macro include header
- *
- *  Copyright (C) 1994-1999 Russell King
- *  Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
-*/
-
-#include "hardware.h"
-
-		.macro	addruart,rx
-		mrc	p15, 0, \rx, c1, c0
-		tst	\rx, #1			@ MMU enabled?
-		moveq	\rx, #0x40000000		@ physical
-		movne	\rx, #io_p2v(0x40000000)	@ virtual
-		orr	\rx, \rx, #0x00100000
-		.endm
-
-#define UART_SHIFT	2
-#include <asm/hardware/debug-8250.S>
diff --git a/include/asm-arm/arch-pxa/dma.h b/include/asm-arm/arch-pxa/dma.h
deleted file mode 100644
index dbe110ee2666..000000000000
--- a/include/asm-arm/arch-pxa/dma.h
+++ /dev/null
@@ -1,50 +0,0 @@
-/*
- *  linux/include/asm-arm/arch-pxa/dma.h
- *
- *  Author:	Nicolas Pitre
- *  Created:	Jun 15, 2001
- *  Copyright:	MontaVista Software, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#ifndef __ASM_ARCH_DMA_H
-#define __ASM_ARCH_DMA_H
-
-/*
- * Descriptor structure for PXA's DMA engine
- * Note: this structure must always be aligned to a 16-byte boundary.
- */
-
-typedef struct pxa_dma_desc {
-	volatile u32 ddadr;	/* Points to the next descriptor + flags */
-	volatile u32 dsadr;	/* DSADR value for the current transfer */
-	volatile u32 dtadr;	/* DTADR value for the current transfer */
-	volatile u32 dcmd;	/* DCMD value for the current transfer */
-} pxa_dma_desc;
-
-typedef enum {
-	DMA_PRIO_HIGH = 0,
-	DMA_PRIO_MEDIUM = 1,
-	DMA_PRIO_LOW = 2
-} pxa_dma_prio;
-
-#if defined(CONFIG_MACH_ARMCORE) && defined(CONFIG_PCI)
-#define HAVE_ARCH_PCI_SET_DMA_MASK	1
-#endif
-
-/*
- * DMA registration
- */
-
-int __init pxa_init_dma(int num_ch);
-
-int pxa_request_dma (char *name,
-			 pxa_dma_prio prio,
-			 void (*irq_handler)(int, void *),
-			 void *data);
-
-void pxa_free_dma (int dma_ch);
-
-#endif /* _ASM_ARCH_DMA_H */
diff --git a/include/asm-arm/arch-pxa/entry-macro.S b/include/asm-arm/arch-pxa/entry-macro.S
deleted file mode 100644
index c145bb01bc8f..000000000000
--- a/include/asm-arm/arch-pxa/entry-macro.S
+++ /dev/null
@@ -1,57 +0,0 @@
-/*
- * include/asm-arm/arch-pxa/entry-macro.S
- *
- * Low-level IRQ helper macros for PXA-based platforms
- *
- * This file is licensed under  the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-#include <asm/hardware.h>
-#include <asm/arch/irqs.h>
-
-		.macro	disable_fiq
-		.endm
-
-		.macro  get_irqnr_preamble, base, tmp
-		.endm
-
-		.macro  arch_ret_to_user, tmp1, tmp2
-		.endm
-
-		.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
-		mrc	p15, 0, \tmp, c0, c0, 0		@ CPUID
-		mov	\tmp, \tmp, lsr #13
-		and	\tmp, \tmp, #0x7		@ Core G
-		cmp	\tmp, #1
-		bhi	1004f
-
-		mov	\base, #io_p2v(0x40000000)	@ IIR Ctl = 0x40d00000
-		add	\base, \base, #0x00d00000
-		ldr	\irqstat, [\base, #0]		@ ICIP
-		ldr	\irqnr, [\base, #4]		@ ICMR
-		b	1002f
-
-1004:
-		mrc	p6, 0, \irqstat, c6, c0, 0	@ ICIP2
-		mrc	p6, 0, \irqnr, c7, c0, 0	@ ICMR2
-		ands	\irqnr, \irqstat, \irqnr
-		beq	1003f
-		rsb	\irqstat, \irqnr, #0
-		and	\irqstat, \irqstat, \irqnr
-		clz	\irqnr, \irqstat
-		rsb	\irqnr, \irqnr, #31
-		add	\irqnr, \irqnr, #32
-		b	1001f
-1003:
-		mrc	p6, 0, \irqstat, c0, c0, 0	@ ICIP
-		mrc	p6, 0, \irqnr, c1, c0, 0	@ ICMR
-1002:
-		ands	\irqnr, \irqstat, \irqnr
-		beq	1001f
-		rsb	\irqstat, \irqnr, #0
-		and	\irqstat, \irqstat, \irqnr
-		clz	\irqnr, \irqstat
-		rsb	\irqnr, \irqnr, #31
-1001:
-		.endm
diff --git a/include/asm-arm/arch-pxa/gpio.h b/include/asm-arm/arch-pxa/gpio.h
deleted file mode 100644
index bdbf5f9ffdd5..000000000000
--- a/include/asm-arm/arch-pxa/gpio.h
+++ /dev/null
@@ -1,65 +0,0 @@
-/*
- * linux/include/asm-arm/arch-pxa/gpio.h
- *
- * PXA GPIO wrappers for arch-neutral GPIO calls
- *
- * Written by Philipp Zabel <philipp.zabel@gmail.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- *
- */
-
-#ifndef __ASM_ARCH_PXA_GPIO_H
-#define __ASM_ARCH_PXA_GPIO_H
-
-#include <asm/arch/pxa-regs.h>
-#include <asm/irq.h>
-#include <asm/hardware.h>
-
-#include <asm-generic/gpio.h>
-
-
-/* NOTE: some PXAs have fewer on-chip GPIOs (like PXA255, with 85).
- * Those cases currently cause holes in the GPIO number space.
- */
-#define NR_BUILTIN_GPIO 128
-
-static inline int gpio_get_value(unsigned gpio)
-{
-	if (__builtin_constant_p(gpio) && (gpio < NR_BUILTIN_GPIO))
-		return GPLR(gpio) & GPIO_bit(gpio);
-	else
-		return __gpio_get_value(gpio);
-}
-
-static inline void gpio_set_value(unsigned gpio, int value)
-{
-	if (__builtin_constant_p(gpio) && (gpio < NR_BUILTIN_GPIO)) {
-		if (value)
-			GPSR(gpio) = GPIO_bit(gpio);
-		else
-			GPCR(gpio) = GPIO_bit(gpio);
-	} else {
-		__gpio_set_value(gpio, value);
-	}
-}
-
-#define gpio_cansleep __gpio_cansleep
-
-#define gpio_to_irq(gpio)	IRQ_GPIO(gpio)
-#define irq_to_gpio(irq)	IRQ_TO_GPIO(irq)
-
-
-#endif
diff --git a/include/asm-arm/arch-pxa/hardware.h b/include/asm-arm/arch-pxa/hardware.h
deleted file mode 100644
index 979a45695d7d..000000000000
--- a/include/asm-arm/arch-pxa/hardware.h
+++ /dev/null
@@ -1,240 +0,0 @@
-/*
- *  linux/include/asm-arm/arch-pxa/hardware.h
- *
- *  Author:	Nicolas Pitre
- *  Created:	Jun 15, 2001
- *  Copyright:	MontaVista Software Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ASM_ARCH_HARDWARE_H
-#define __ASM_ARCH_HARDWARE_H
-
-/*
- * We requires absolute addresses.
- */
-#define PCIO_BASE		0
-
-/*
- * Workarounds for at least 2 errata so far require this.
- * The mapping is set in mach-pxa/generic.c.
- */
-#define UNCACHED_PHYS_0		0xff000000
-#define UNCACHED_ADDR		UNCACHED_PHYS_0
-
-/*
- * Intel PXA2xx internal register mapping:
- *
- * 0x40000000 - 0x41ffffff <--> 0xf2000000 - 0xf3ffffff
- * 0x44000000 - 0x45ffffff <--> 0xf4000000 - 0xf5ffffff
- * 0x48000000 - 0x49ffffff <--> 0xf6000000 - 0xf7ffffff
- * 0x4c000000 - 0x4dffffff <--> 0xf8000000 - 0xf9ffffff
- * 0x50000000 - 0x51ffffff <--> 0xfa000000 - 0xfbffffff
- * 0x54000000 - 0x55ffffff <--> 0xfc000000 - 0xfdffffff
- * 0x58000000 - 0x59ffffff <--> 0xfe000000 - 0xffffffff
- *
- * Note that not all PXA2xx chips implement all those addresses, and the
- * kernel only maps the minimum needed range of this mapping.
- */
-#define io_p2v(x) (0xf2000000 + ((x) & 0x01ffffff) + (((x) & 0x1c000000) >> 1))
-#define io_v2p(x) (0x3c000000 + ((x) & 0x01ffffff) + (((x) & 0x0e000000) << 1))
-
-#ifndef __ASSEMBLY__
-
-# define __REG(x)	(*((volatile u32 *)io_p2v(x)))
-
-/* With indexed regs we don't want to feed the index through io_p2v()
-   especially if it is a variable, otherwise horrible code will result. */
-# define __REG2(x,y)	\
-	(*(volatile u32 *)((u32)&__REG(x) + (y)))
-
-# define __PREG(x)	(io_v2p((u32)&(x)))
-
-#else
-
-# define __REG(x)	io_p2v(x)
-# define __PREG(x)	io_v2p(x)
-
-#endif
-
-#ifndef __ASSEMBLY__
-
-#ifdef CONFIG_PXA25x
-#define __cpu_is_pxa21x(id)				\
-	({						\
-		unsigned int _id = (id) >> 4 & 0xf3f;	\
-		_id == 0x212;				\
-	})
-
-#define __cpu_is_pxa255(id)                             \
-	({                                              \
-		unsigned int _id = (id) >> 4 & 0xfff;   \
-		_id == 0x2d0;                           \
-	 })
-
-#define __cpu_is_pxa25x(id)				\
-	({						\
-		unsigned int _id = (id) >> 4 & 0xfff;	\
-		_id == 0x2d0 || _id == 0x290;		\
-	})
-#else
-#define __cpu_is_pxa21x(id)	(0)
-#define __cpu_is_pxa255(id)	(0)
-#define __cpu_is_pxa25x(id)	(0)
-#endif
-
-#ifdef CONFIG_PXA27x
-#define __cpu_is_pxa27x(id)				\
-	({						\
-		unsigned int _id = (id) >> 4 & 0xfff;	\
-		_id == 0x411;				\
-	})
-#else
-#define __cpu_is_pxa27x(id)	(0)
-#endif
-
-#ifdef CONFIG_CPU_PXA300
-#define __cpu_is_pxa300(id)				\
-	({						\
-		unsigned int _id = (id) >> 4 & 0xfff;	\
-		_id == 0x688;				\
-	 })
-#else
-#define __cpu_is_pxa300(id)	(0)
-#endif
-
-#ifdef CONFIG_CPU_PXA310
-#define __cpu_is_pxa310(id)				\
-	({						\
-		unsigned int _id = (id) >> 4 & 0xfff;	\
-		_id == 0x689;				\
-	 })
-#else
-#define __cpu_is_pxa310(id)	(0)
-#endif
-
-#ifdef CONFIG_CPU_PXA320
-#define __cpu_is_pxa320(id)				\
-	({						\
-		unsigned int _id = (id) >> 4 & 0xfff;	\
-		_id == 0x603 || _id == 0x682;		\
-	 })
-#else
-#define __cpu_is_pxa320(id)	(0)
-#endif
-
-#ifdef CONFIG_CPU_PXA930
-#define __cpu_is_pxa930(id)				\
-	({						\
-		unsigned int _id = (id) >> 4 & 0xfff;	\
-		_id == 0x683;		\
-	 })
-#else
-#define __cpu_is_pxa930(id)	(0)
-#endif
-
-#define cpu_is_pxa21x()					\
-	({						\
-		__cpu_is_pxa21x(read_cpuid_id());	\
-	})
-
-#define cpu_is_pxa255()                                 \
-	({                                              \
-		__cpu_is_pxa255(read_cpuid_id());       \
-	})
-
-#define cpu_is_pxa25x()					\
-	({						\
-		__cpu_is_pxa25x(read_cpuid_id());	\
-	})
-
-#define cpu_is_pxa27x()					\
-	({						\
-		__cpu_is_pxa27x(read_cpuid_id());	\
-	})
-
-#define cpu_is_pxa300()					\
-	({						\
-		__cpu_is_pxa300(read_cpuid_id());	\
-	 })
-
-#define cpu_is_pxa310()					\
-	({						\
-		__cpu_is_pxa310(read_cpuid_id());	\
-	 })
-
-#define cpu_is_pxa320()					\
-	({						\
-		__cpu_is_pxa320(read_cpuid_id());	\
-	 })
-
-#define cpu_is_pxa930()					\
-	({						\
-		unsigned int id = read_cpuid(CPUID_ID);	\
-		__cpu_is_pxa930(id);			\
-	 })
-
-/*
- * CPUID Core Generation Bit
- * <= 0x2 for pxa21x/pxa25x/pxa26x/pxa27x
- * == 0x3 for pxa300/pxa310/pxa320
- */
-#define __cpu_is_pxa2xx(id)				\
-	({						\
-		unsigned int _id = (id) >> 13 & 0x7;	\
-		_id <= 0x2;				\
-	 })
-
-#define __cpu_is_pxa3xx(id)				\
-	({						\
-		unsigned int _id = (id) >> 13 & 0x7;	\
-		_id == 0x3;				\
-	 })
-
-#define cpu_is_pxa2xx()					\
-	({						\
-		__cpu_is_pxa2xx(read_cpuid_id());	\
-	 })
-
-#define cpu_is_pxa3xx()					\
-	({						\
-		__cpu_is_pxa3xx(read_cpuid_id());	\
-	 })
-
-/*
- * Handy routine to set GPIO alternate functions
- */
-extern int pxa_gpio_mode( int gpio_mode );
-
-/*
- * Return GPIO level, nonzero means high, zero is low
- */
-extern int pxa_gpio_get_value(unsigned gpio);
-
-/*
- * Set output GPIO level
- */
-extern void pxa_gpio_set_value(unsigned gpio, int value);
-
-/*
- * return current memory and LCD clock frequency in units of 10kHz
- */
-extern unsigned int get_memclk_frequency_10khz(void);
-
-/*
- * register GPIO as reset generator
- */
-extern int init_gpio_reset(int gpio);
-
-#endif
-
-#if defined(CONFIG_MACH_ARMCORE) && defined(CONFIG_PCI)
-#define PCIBIOS_MIN_IO		0
-#define PCIBIOS_MIN_MEM		0
-#define pcibios_assign_all_busses()	1
-#endif
-
-#endif  /* _ASM_ARCH_HARDWARE_H */
diff --git a/include/asm-arm/arch-pxa/io.h b/include/asm-arm/arch-pxa/io.h
deleted file mode 100644
index 7f8d817b446f..000000000000
--- a/include/asm-arm/arch-pxa/io.h
+++ /dev/null
@@ -1,20 +0,0 @@
-/*
- * linux/include/asm-arm/arch-pxa/io.h
- *
- * Copied from asm/arch/sa1100/io.h
- */
-#ifndef __ASM_ARM_ARCH_IO_H
-#define __ASM_ARM_ARCH_IO_H
-
-#include <asm/hardware.h>
-
-#define IO_SPACE_LIMIT 0xffffffff
-
-/*
- * We don't actually have real ISA nor PCI buses, but there is so many
- * drivers out there that might just work if we fake them...
- */
-#define __io(a)			((void __iomem *)(a))
-#define __mem_pci(a)		(a)
-
-#endif
diff --git a/include/asm-arm/arch-pxa/irqs.h b/include/asm-arm/arch-pxa/irqs.h
deleted file mode 100644
index 9413121b0ed9..000000000000
--- a/include/asm-arm/arch-pxa/irqs.h
+++ /dev/null
@@ -1,264 +0,0 @@
-/*
- *  linux/include/asm-arm/arch-pxa/irqs.h
- *
- *  Author:	Nicolas Pitre
- *  Created:	Jun 15, 2001
- *  Copyright:	MontaVista Software Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-
-#define PXA_IRQ(x)	(x)
-
-#if defined(CONFIG_PXA27x) || defined(CONFIG_PXA3xx)
-#define IRQ_SSP3	PXA_IRQ(0)	/* SSP3 service request */
-#define IRQ_MSL		PXA_IRQ(1)	/* MSL Interface interrupt */
-#define IRQ_USBH2	PXA_IRQ(2)	/* USB Host interrupt 1 (OHCI) */
-#define IRQ_USBH1	PXA_IRQ(3)	/* USB Host interrupt 2 (non-OHCI) */
-#define IRQ_KEYPAD	PXA_IRQ(4)	/* Key pad controller */
-#define IRQ_MEMSTK	PXA_IRQ(5)	/* Memory Stick interrupt */
-#define IRQ_PWRI2C	PXA_IRQ(6)	/* Power I2C interrupt */
-#endif
-
-#define IRQ_HWUART	PXA_IRQ(7)	/* HWUART Transmit/Receive/Error (PXA26x) */
-#define IRQ_OST_4_11	PXA_IRQ(7)	/* OS timer 4-11 matches (PXA27x) */
-#define	IRQ_GPIO0	PXA_IRQ(8)	/* GPIO0 Edge Detect */
-#define	IRQ_GPIO1	PXA_IRQ(9)	/* GPIO1 Edge Detect */
-#define	IRQ_GPIO_2_x	PXA_IRQ(10)	/* GPIO[2-x] Edge Detect */
-#define	IRQ_USB		PXA_IRQ(11)	/* USB Service */
-#define	IRQ_PMU		PXA_IRQ(12)	/* Performance Monitoring Unit */
-#define	IRQ_I2S		PXA_IRQ(13)	/* I2S Interrupt */
-#define	IRQ_AC97	PXA_IRQ(14)	/* AC97 Interrupt */
-#define IRQ_ASSP	PXA_IRQ(15)	/* Audio SSP Service Request (PXA25x) */
-#define IRQ_USIM	PXA_IRQ(15)     /* Smart Card interface interrupt (PXA27x) */
-#define IRQ_NSSP	PXA_IRQ(16)	/* Network SSP Service Request (PXA25x) */
-#define IRQ_SSP2	PXA_IRQ(16)	/* SSP2 interrupt (PXA27x) */
-#define	IRQ_LCD		PXA_IRQ(17)	/* LCD Controller Service Request */
-#define	IRQ_I2C		PXA_IRQ(18)	/* I2C Service Request */
-#define	IRQ_ICP		PXA_IRQ(19)	/* ICP Transmit/Receive/Error */
-#define	IRQ_STUART	PXA_IRQ(20)	/* STUART Transmit/Receive/Error */
-#define	IRQ_BTUART	PXA_IRQ(21)	/* BTUART Transmit/Receive/Error */
-#define	IRQ_FFUART	PXA_IRQ(22)	/* FFUART Transmit/Receive/Error*/
-#define	IRQ_MMC		PXA_IRQ(23)	/* MMC Status/Error Detection */
-#define	IRQ_SSP		PXA_IRQ(24)	/* SSP Service Request */
-#define	IRQ_DMA 	PXA_IRQ(25)	/* DMA Channel Service Request */
-#define	IRQ_OST0 	PXA_IRQ(26)	/* OS Timer match 0 */
-#define	IRQ_OST1 	PXA_IRQ(27)	/* OS Timer match 1 */
-#define	IRQ_OST2 	PXA_IRQ(28)	/* OS Timer match 2 */
-#define	IRQ_OST3 	PXA_IRQ(29)	/* OS Timer match 3 */
-#define	IRQ_RTC1Hz	PXA_IRQ(30)	/* RTC HZ Clock Tick */
-#define	IRQ_RTCAlrm	PXA_IRQ(31)	/* RTC Alarm */
-
-#if defined(CONFIG_PXA27x) || defined(CONFIG_PXA3xx)
-#define IRQ_TPM		PXA_IRQ(32)	/* TPM interrupt */
-#define IRQ_CAMERA	PXA_IRQ(33)	/* Camera Interface */
-#endif
-
-#ifdef CONFIG_PXA3xx
-#define IRQ_SSP4	PXA_IRQ(13)	/* SSP4 service request */
-#define IRQ_CIR		PXA_IRQ(34)	/* Consumer IR */
-#define IRQ_TSI		PXA_IRQ(36)	/* Touch Screen Interface (PXA320) */
-#define IRQ_USIM2	PXA_IRQ(38)	/* USIM2 Controller */
-#define IRQ_GRPHICS	PXA_IRQ(39)	/* Graphics Controller */
-#define IRQ_MMC2	PXA_IRQ(41)	/* MMC2 Controller */
-#define IRQ_1WIRE	PXA_IRQ(44)	/* 1-Wire Controller */
-#define IRQ_NAND	PXA_IRQ(45)	/* NAND Controller */
-#define IRQ_USB2	PXA_IRQ(46)	/* USB 2.0 Device Controller */
-#define IRQ_WAKEUP0	PXA_IRQ(49)	/* EXT_WAKEUP0 */
-#define IRQ_WAKEUP1	PXA_IRQ(50)	/* EXT_WAKEUP1 */
-#define IRQ_DMEMC	PXA_IRQ(51)	/* Dynamic Memory Controller */
-#define IRQ_MMC3	PXA_IRQ(55)	/* MMC3 Controller (PXA310) */
-#endif
-
-#define PXA_GPIO_IRQ_BASE	(64)
-#define PXA_GPIO_IRQ_NUM	(128)
-
-#define GPIO_2_x_TO_IRQ(x)	(PXA_GPIO_IRQ_BASE + (x))
-#define IRQ_GPIO(x)	(((x) < 2) ? (IRQ_GPIO0 + (x)) : GPIO_2_x_TO_IRQ(x))
-
-#define IRQ_TO_GPIO_2_x(i)	((i) - PXA_GPIO_IRQ_BASE)
-#define IRQ_TO_GPIO(i)	(((i) < IRQ_GPIO(2)) ? ((i) - IRQ_GPIO0) : IRQ_TO_GPIO_2_x(i))
-
-/*
- * The next 16 interrupts are for board specific purposes.  Since
- * the kernel can only run on one machine at a time, we can re-use
- * these.  If you need more, increase IRQ_BOARD_END, but keep it
- * within sensible limits.
- */
-#define IRQ_BOARD_START		(PXA_GPIO_IRQ_BASE + PXA_GPIO_IRQ_NUM)
-#define IRQ_BOARD_END		(IRQ_BOARD_START + 16)
-
-#define IRQ_SA1111_START	(IRQ_BOARD_END)
-#define IRQ_GPAIN0		(IRQ_BOARD_END + 0)
-#define IRQ_GPAIN1		(IRQ_BOARD_END + 1)
-#define IRQ_GPAIN2		(IRQ_BOARD_END + 2)
-#define IRQ_GPAIN3		(IRQ_BOARD_END + 3)
-#define IRQ_GPBIN0		(IRQ_BOARD_END + 4)
-#define IRQ_GPBIN1		(IRQ_BOARD_END + 5)
-#define IRQ_GPBIN2		(IRQ_BOARD_END + 6)
-#define IRQ_GPBIN3		(IRQ_BOARD_END + 7)
-#define IRQ_GPBIN4		(IRQ_BOARD_END + 8)
-#define IRQ_GPBIN5		(IRQ_BOARD_END + 9)
-#define IRQ_GPCIN0		(IRQ_BOARD_END + 10)
-#define IRQ_GPCIN1		(IRQ_BOARD_END + 11)
-#define IRQ_GPCIN2		(IRQ_BOARD_END + 12)
-#define IRQ_GPCIN3		(IRQ_BOARD_END + 13)
-#define IRQ_GPCIN4		(IRQ_BOARD_END + 14)
-#define IRQ_GPCIN5		(IRQ_BOARD_END + 15)
-#define IRQ_GPCIN6		(IRQ_BOARD_END + 16)
-#define IRQ_GPCIN7		(IRQ_BOARD_END + 17)
-#define IRQ_MSTXINT		(IRQ_BOARD_END + 18)
-#define IRQ_MSRXINT		(IRQ_BOARD_END + 19)
-#define IRQ_MSSTOPERRINT	(IRQ_BOARD_END + 20)
-#define IRQ_TPTXINT		(IRQ_BOARD_END + 21)
-#define IRQ_TPRXINT		(IRQ_BOARD_END + 22)
-#define IRQ_TPSTOPERRINT	(IRQ_BOARD_END + 23)
-#define SSPXMTINT		(IRQ_BOARD_END + 24)
-#define SSPRCVINT		(IRQ_BOARD_END + 25)
-#define SSPROR			(IRQ_BOARD_END + 26)
-#define AUDXMTDMADONEA		(IRQ_BOARD_END + 32)
-#define AUDRCVDMADONEA		(IRQ_BOARD_END + 33)
-#define AUDXMTDMADONEB		(IRQ_BOARD_END + 34)
-#define AUDRCVDMADONEB		(IRQ_BOARD_END + 35)
-#define AUDTFSR			(IRQ_BOARD_END + 36)
-#define AUDRFSR			(IRQ_BOARD_END + 37)
-#define AUDTUR			(IRQ_BOARD_END + 38)
-#define AUDROR			(IRQ_BOARD_END + 39)
-#define AUDDTS			(IRQ_BOARD_END + 40)
-#define AUDRDD			(IRQ_BOARD_END + 41)
-#define AUDSTO			(IRQ_BOARD_END + 42)
-#define IRQ_USBPWR		(IRQ_BOARD_END + 43)
-#define IRQ_HCIM		(IRQ_BOARD_END + 44)
-#define IRQ_HCIBUFFACC		(IRQ_BOARD_END + 45)
-#define IRQ_HCIRMTWKP		(IRQ_BOARD_END + 46)
-#define IRQ_NHCIMFCIR		(IRQ_BOARD_END + 47)
-#define IRQ_USB_PORT_RESUME	(IRQ_BOARD_END + 48)
-#define IRQ_S0_READY_NINT	(IRQ_BOARD_END + 49)
-#define IRQ_S1_READY_NINT	(IRQ_BOARD_END + 50)
-#define IRQ_S0_CD_VALID		(IRQ_BOARD_END + 51)
-#define IRQ_S1_CD_VALID		(IRQ_BOARD_END + 52)
-#define IRQ_S0_BVD1_STSCHG	(IRQ_BOARD_END + 53)
-#define IRQ_S1_BVD1_STSCHG	(IRQ_BOARD_END + 54)
-
-#define IRQ_LOCOMO_START	(IRQ_BOARD_END)
-#define IRQ_LOCOMO_KEY		(IRQ_BOARD_END + 0)
-#define IRQ_LOCOMO_GPIO0	(IRQ_BOARD_END + 1)
-#define IRQ_LOCOMO_GPIO1	(IRQ_BOARD_END + 2)
-#define IRQ_LOCOMO_GPIO2	(IRQ_BOARD_END + 3)
-#define IRQ_LOCOMO_GPIO3	(IRQ_BOARD_END + 4)
-#define IRQ_LOCOMO_GPIO4	(IRQ_BOARD_END + 5)
-#define IRQ_LOCOMO_GPIO5	(IRQ_BOARD_END + 6)
-#define IRQ_LOCOMO_GPIO6	(IRQ_BOARD_END + 7)
-#define IRQ_LOCOMO_GPIO7	(IRQ_BOARD_END + 8)
-#define IRQ_LOCOMO_GPIO8	(IRQ_BOARD_END + 9)
-#define IRQ_LOCOMO_GPIO9	(IRQ_BOARD_END + 10)
-#define IRQ_LOCOMO_GPIO10	(IRQ_BOARD_END + 11)
-#define IRQ_LOCOMO_GPIO11	(IRQ_BOARD_END + 12)
-#define IRQ_LOCOMO_GPIO12	(IRQ_BOARD_END + 13)
-#define IRQ_LOCOMO_GPIO13	(IRQ_BOARD_END + 14)
-#define IRQ_LOCOMO_GPIO14	(IRQ_BOARD_END + 15)
-#define IRQ_LOCOMO_GPIO15	(IRQ_BOARD_END + 16)
-#define IRQ_LOCOMO_LT		(IRQ_BOARD_END + 17)
-#define IRQ_LOCOMO_SPI_RFR	(IRQ_BOARD_END + 18)
-#define IRQ_LOCOMO_SPI_RFW	(IRQ_BOARD_END + 19)
-#define IRQ_LOCOMO_SPI_OVRN	(IRQ_BOARD_END + 20)
-#define IRQ_LOCOMO_SPI_TEND	(IRQ_BOARD_END + 21)
-
-/*
- * Figure out the MAX IRQ number.
- *
- * If we have an SA1111, the max IRQ is S1_BVD1_STSCHG+1.
- * If we have an LoCoMo, the max IRQ is IRQ_LOCOMO_SPI_TEND+1
- * Otherwise, we have the standard IRQs only.
- */
-#ifdef CONFIG_SA1111
-#define NR_IRQS			(IRQ_S1_BVD1_STSCHG + 1)
-#elif defined(CONFIG_SHARP_LOCOMO)
-#define NR_IRQS			(IRQ_LOCOMO_SPI_TEND + 1)
-#elif defined(CONFIG_ARCH_LUBBOCK) || \
-      defined(CONFIG_MACH_LOGICPD_PXA270) || \
-      defined(CONFIG_MACH_TOSA) || \
-      defined(CONFIG_MACH_MAINSTONE) || \
-      defined(CONFIG_MACH_PCM027) || \
-      defined(CONFIG_MACH_MAGICIAN)
-#define NR_IRQS			(IRQ_BOARD_END)
-#elif defined(CONFIG_MACH_ZYLONITE)
-#define NR_IRQS			(IRQ_BOARD_START + 32)
-#else
-#define NR_IRQS			(IRQ_BOARD_START)
-#endif
-
-/*
- * Board specific IRQs.  Define them here.
- * Do not surround them with ifdefs.
- */
-#define LUBBOCK_IRQ(x)		(IRQ_BOARD_START + (x))
-#define LUBBOCK_SD_IRQ		LUBBOCK_IRQ(0)
-#define LUBBOCK_SA1111_IRQ	LUBBOCK_IRQ(1)
-#define LUBBOCK_USB_IRQ		LUBBOCK_IRQ(2)  /* usb connect */
-#define LUBBOCK_ETH_IRQ		LUBBOCK_IRQ(3)
-#define LUBBOCK_UCB1400_IRQ	LUBBOCK_IRQ(4)
-#define LUBBOCK_BB_IRQ		LUBBOCK_IRQ(5)
-#define LUBBOCK_USB_DISC_IRQ	LUBBOCK_IRQ(6)  /* usb disconnect */
-#define LUBBOCK_LAST_IRQ	LUBBOCK_IRQ(6)
-
-#define LPD270_IRQ(x)		(IRQ_BOARD_START + (x))
-#define LPD270_USBC_IRQ		LPD270_IRQ(2)
-#define LPD270_ETHERNET_IRQ	LPD270_IRQ(3)
-#define LPD270_AC97_IRQ		LPD270_IRQ(4)
-
-#define MAINSTONE_IRQ(x)	(IRQ_BOARD_START + (x))
-#define MAINSTONE_MMC_IRQ	MAINSTONE_IRQ(0)
-#define MAINSTONE_USIM_IRQ	MAINSTONE_IRQ(1)
-#define MAINSTONE_USBC_IRQ	MAINSTONE_IRQ(2)
-#define MAINSTONE_ETHERNET_IRQ	MAINSTONE_IRQ(3)
-#define MAINSTONE_AC97_IRQ	MAINSTONE_IRQ(4)
-#define MAINSTONE_PEN_IRQ	MAINSTONE_IRQ(5)
-#define MAINSTONE_MSINS_IRQ	MAINSTONE_IRQ(6)
-#define MAINSTONE_EXBRD_IRQ	MAINSTONE_IRQ(7)
-#define MAINSTONE_S0_CD_IRQ	MAINSTONE_IRQ(9)
-#define MAINSTONE_S0_STSCHG_IRQ	MAINSTONE_IRQ(10)
-#define MAINSTONE_S0_IRQ	MAINSTONE_IRQ(11)
-#define MAINSTONE_S1_CD_IRQ	MAINSTONE_IRQ(13)
-#define MAINSTONE_S1_STSCHG_IRQ	MAINSTONE_IRQ(14)
-#define MAINSTONE_S1_IRQ	MAINSTONE_IRQ(15)
-
-/* LoCoMo Interrupts (CONFIG_SHARP_LOCOMO) */
-#define IRQ_LOCOMO_KEY_BASE	(IRQ_BOARD_START + 0)
-#define IRQ_LOCOMO_GPIO_BASE	(IRQ_BOARD_START + 1)
-#define IRQ_LOCOMO_LT_BASE	(IRQ_BOARD_START + 2)
-#define IRQ_LOCOMO_SPI_BASE	(IRQ_BOARD_START + 3)
-
-/* phyCORE-PXA270 (PCM027) Interrupts */
-#define PCM027_IRQ(x)          (IRQ_BOARD_START + (x))
-#define PCM027_BTDET_IRQ       PCM027_IRQ(0)
-#define PCM027_FF_RI_IRQ       PCM027_IRQ(1)
-#define PCM027_MMCDET_IRQ      PCM027_IRQ(2)
-#define PCM027_PM_5V_IRQ       PCM027_IRQ(3)
-
-/* ITE8152 irqs */
-/* add IT8152 IRQs beyond BOARD_END */
-#ifdef CONFIG_PCI_HOST_ITE8152
-#define IT8152_IRQ(x)   (IRQ_BOARD_END + (x))
-
-/* IRQ-sources in 3 groups - local devices, LPC (serial), and external PCI */
-#define IT8152_LD_IRQ_COUNT     9
-#define IT8152_LP_IRQ_COUNT     16
-#define IT8152_PD_IRQ_COUNT     15
-
-/* Priorities: */
-#define IT8152_PD_IRQ(i)        IT8152_IRQ(i)
-#define IT8152_LP_IRQ(i)        (IT8152_IRQ(i) + IT8152_PD_IRQ_COUNT)
-#define IT8152_LD_IRQ(i)        (IT8152_IRQ(i) + IT8152_PD_IRQ_COUNT + IT8152_LP_IRQ_COUNT)
-
-#define IT8152_LAST_IRQ         IT8152_LD_IRQ(IT8152_LD_IRQ_COUNT - 1)
-
-#if NR_IRQS < (IT8152_LAST_IRQ+1)
-#undef NR_IRQS
-#define NR_IRQS (IT8152_LAST_IRQ+1)
-#endif
-
-#endif /* CONFIG_PCI_HOST_ITE8152 */
diff --git a/include/asm-arm/arch-pxa/memory.h b/include/asm-arm/arch-pxa/memory.h
deleted file mode 100644
index bee81d66c184..000000000000
--- a/include/asm-arm/arch-pxa/memory.h
+++ /dev/null
@@ -1,52 +0,0 @@
-/*
- *  linux/include/asm-arm/arch-pxa/memory.h
- *
- * Author:	Nicolas Pitre
- * Copyright:	(C) 2001 MontaVista Software Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ASM_ARCH_MEMORY_H
-#define __ASM_ARCH_MEMORY_H
-
-/*
- * Physical DRAM offset.
- */
-#define PHYS_OFFSET	UL(0xa0000000)
-
-/*
- * Virtual view <-> DMA view memory address translations
- * virt_to_bus: Used to translate the virtual address to an
- *		address suitable to be passed to set_dma_addr
- * bus_to_virt: Used to convert an address for DMA operations
- *		to an address that the kernel can use.
- */
-#define __virt_to_bus(x)	 __virt_to_phys(x)
-#define __bus_to_virt(x)	 __phys_to_virt(x)
-
-/*
- * The nodes are matched with the physical SDRAM banks as follows:
- *
- * 	node 0:  0xa0000000-0xa3ffffff	-->  0xc0000000-0xc3ffffff
- * 	node 1:  0xa4000000-0xa7ffffff	-->  0xc4000000-0xc7ffffff
- * 	node 2:  0xa8000000-0xabffffff	-->  0xc8000000-0xcbffffff
- * 	node 3:  0xac000000-0xafffffff	-->  0xcc000000-0xcfffffff
- *
- * This needs a node mem size of 26 bits.
- */
-#define NODE_MEM_SIZE_BITS	26
-
-#if !defined(__ASSEMBLY__) && defined(CONFIG_MACH_ARMCORE) && defined(CONFIG_PCI)
-void cmx270_pci_adjust_zones(int node, unsigned long *size,
-			     unsigned long *holes);
-
-#define arch_adjust_zones(node, size, holes) \
-	cmx270_pci_adjust_zones(node, size, holes)
-
-#define ISA_DMA_THRESHOLD	(PHYS_OFFSET + SZ_64M - 1)
-#endif
-
-#endif
diff --git a/include/asm-arm/arch-pxa/mtd-xip.h b/include/asm-arm/arch-pxa/mtd-xip.h
deleted file mode 100644
index 8704dbceb432..000000000000
--- a/include/asm-arm/arch-pxa/mtd-xip.h
+++ /dev/null
@@ -1,37 +0,0 @@
-/*
- * MTD primitives for XIP support. Architecture specific functions
- *
- * Do not include this file directly. It's included from linux/mtd/xip.h
- * 
- * Author:	Nicolas Pitre
- * Created:	Nov 2, 2004
- * Copyright:	(C) 2004 MontaVista Software, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * $Id: xip.h,v 1.2 2004/12/01 15:49:10 nico Exp $
- */
-
-#ifndef __ARCH_PXA_MTD_XIP_H__
-#define __ARCH_PXA_MTD_XIP_H__
-
-#include <asm/arch/pxa-regs.h>
-
-#define xip_irqpending()	(ICIP & ICMR)
-
-/* we sample OSCR and convert desired delta to usec (1/4 ~= 1000000/3686400) */
-#define xip_currtime()		(OSCR)
-#define xip_elapsed_since(x)	(signed)((OSCR - (x)) / 4)
-
-/*
- * xip_cpu_idle() is used when waiting for a delay equal or larger than
- * the system timer tick period.  This should put the CPU into idle mode
- * to save power and to be woken up only when some interrupts are pending.
- * As above, this should not rely upon standard kernel code.
- */
-
-#define xip_cpu_idle()  asm volatile ("mcr p14, 0, %0, c7, c0, 0" :: "r" (1))
-
-#endif /* __ARCH_PXA_MTD_XIP_H__ */
diff --git a/include/asm-arm/arch-pxa/regs-lcd.h b/include/asm-arm/arch-pxa/regs-lcd.h
deleted file mode 100644
index 820a189684a9..000000000000
--- a/include/asm-arm/arch-pxa/regs-lcd.h
+++ /dev/null
@@ -1,180 +0,0 @@
-#ifndef __ASM_ARCH_REGS_LCD_H
-#define __ASM_ARCH_REGS_LCD_H
-
-#include <asm/arch/bitfield.h>
-
-/*
- * LCD Controller Registers and Bits Definitions
- */
-#define LCCR0		(0x000)	/* LCD Controller Control Register 0 */
-#define LCCR1		(0x004)	/* LCD Controller Control Register 1 */
-#define LCCR2		(0x008)	/* LCD Controller Control Register 2 */
-#define LCCR3		(0x00C)	/* LCD Controller Control Register 3 */
-#define LCCR4		(0x010)	/* LCD Controller Control Register 4 */
-#define LCCR5		(0x014)	/* LCD Controller Control Register 5 */
-#define DFBR0		(0x020)	/* DMA Channel 0 Frame Branch Register */
-#define DFBR1		(0x024)	/* DMA Channel 1 Frame Branch Register */
-#define LCSR		(0x038)	/* LCD Controller Status Register */
-#define LIIDR		(0x03C)	/* LCD Controller Interrupt ID Register */
-#define TMEDRGBR	(0x040)	/* TMED RGB Seed Register */
-#define TMEDCR		(0x044)	/* TMED Control Register */
-
-#define CMDCR		(0x100)	/* Command Control Register */
-#define PRSR		(0x104)	/* Panel Read Status Register */
-
-#define LCCR3_1BPP	(0 << 24)
-#define LCCR3_2BPP	(1 << 24)
-#define LCCR3_4BPP	(2 << 24)
-#define LCCR3_8BPP	(3 << 24)
-#define LCCR3_16BPP	(4 << 24)
-#define LCCR3_18BPP	(5 << 24)
-#define LCCR3_18BPP_P	(6 << 24)
-#define LCCR3_19BPP	(7 << 24)
-#define LCCR3_19BPP_P	(1 << 29)
-#define LCCR3_24BPP	((1 << 29) | (1 << 24))
-#define LCCR3_25BPP	((1 << 29) | (2 << 24))
-
-#define LCCR3_PDFOR_0	(0 << 30)
-#define LCCR3_PDFOR_1	(1 << 30)
-#define LCCR3_PDFOR_2	(2 << 30)
-#define LCCR3_PDFOR_3	(3 << 30)
-
-#define LCCR4_PAL_FOR_0	(0 << 15)
-#define LCCR4_PAL_FOR_1	(1 << 15)
-#define LCCR4_PAL_FOR_2	(2 << 15)
-#define LCCR4_PAL_FOR_MASK	(3 << 15)
-
-#define FDADR0		(0x200)	/* DMA Channel 0 Frame Descriptor Address Register */
-#define FSADR0		(0x204)	/* DMA Channel 0 Frame Source Address Register */
-#define FIDR0		(0x208)	/* DMA Channel 0 Frame ID Register */
-#define LDCMD0		(0x20C)	/* DMA Channel 0 Command Register */
-#define FDADR1		(0x210)	/* DMA Channel 1 Frame Descriptor Address Register */
-#define FSADR1		(0x214)	/* DMA Channel 1 Frame Source Address Register */
-#define FIDR1		(0x218)	/* DMA Channel 1 Frame ID Register */
-#define LDCMD1		(0x21C)	/* DMA Channel 1 Command Register */
-#define FDADR6		(0x260) /* DMA Channel 6 Frame Descriptor Address Register */
-#define FSADR6		(0x264) /* DMA Channel 6 Frame Source Address Register */
-#define FIDR6		(0x268) /* DMA Channel 6 Frame ID Register */
-
-#define LCCR0_ENB	(1 << 0)	/* LCD Controller enable */
-#define LCCR0_CMS	(1 << 1)	/* Color/Monochrome Display Select */
-#define LCCR0_Color	(LCCR0_CMS*0)	/*  Color display */
-#define LCCR0_Mono	(LCCR0_CMS*1)	/*  Monochrome display */
-#define LCCR0_SDS	(1 << 2)	/* Single/Dual Panel Display Select */
-#define LCCR0_Sngl	(LCCR0_SDS*0)	/*  Single panel display */
-#define LCCR0_Dual	(LCCR0_SDS*1)	/*  Dual panel display */
-
-#define LCCR0_LDM	(1 << 3)	/* LCD Disable Done Mask */
-#define LCCR0_SFM	(1 << 4)	/* Start of frame mask */
-#define LCCR0_IUM	(1 << 5)	/* Input FIFO underrun mask */
-#define LCCR0_EFM	(1 << 6)	/* End of Frame mask */
-#define LCCR0_PAS	(1 << 7)	/* Passive/Active display Select */
-#define LCCR0_Pas	(LCCR0_PAS*0)	/*  Passive display (STN) */
-#define LCCR0_Act	(LCCR0_PAS*1)	/*  Active display (TFT) */
-#define LCCR0_DPD	(1 << 9)	/* Double Pixel Data (monochrome) */
-#define LCCR0_4PixMono	(LCCR0_DPD*0)	/*  4-Pixel/clock Monochrome display */
-#define LCCR0_8PixMono	(LCCR0_DPD*1)	/*  8-Pixel/clock Monochrome display */
-#define LCCR0_DIS	(1 << 10)	/* LCD Disable */
-#define LCCR0_QDM	(1 << 11)	/* LCD Quick Disable mask */
-#define LCCR0_PDD	(0xff << 12)	/* Palette DMA request delay */
-#define LCCR0_PDD_S	12
-#define LCCR0_BM	(1 << 20)	/* Branch mask */
-#define LCCR0_OUM	(1 << 21)	/* Output FIFO underrun mask */
-#define LCCR0_LCDT	(1 << 22)	/* LCD panel type */
-#define LCCR0_RDSTM	(1 << 23)	/* Read status interrupt mask */
-#define LCCR0_CMDIM	(1 << 24)	/* Command interrupt mask */
-#define LCCR0_OUC	(1 << 25)	/* Overlay Underlay control bit */
-#define LCCR0_LDDALT	(1 << 26)	/* LDD alternate mapping control */
-
-#define LCCR1_PPL	Fld (10, 0)	/* Pixels Per Line - 1 */
-#define LCCR1_DisWdth(Pixel)	(((Pixel) - 1) << FShft (LCCR1_PPL))
-
-#define LCCR1_HSW	Fld (6, 10)	/* Horizontal Synchronization */
-#define LCCR1_HorSnchWdth(Tpix)	(((Tpix) - 1) << FShft (LCCR1_HSW))
-
-#define LCCR1_ELW	Fld (8, 16)	/* End-of-Line pixel clock Wait - 1 */
-#define LCCR1_EndLnDel(Tpix)	(((Tpix) - 1) << FShft (LCCR1_ELW))
-
-#define LCCR1_BLW	Fld (8, 24)	/* Beginning-of-Line pixel clock */
-#define LCCR1_BegLnDel(Tpix)	(((Tpix) - 1) << FShft (LCCR1_BLW))
-
-#define LCCR2_LPP	Fld (10, 0)	/* Line Per Panel - 1 */
-#define LCCR2_DisHght(Line)	(((Line) - 1) << FShft (LCCR2_LPP))
-
-#define LCCR2_VSW	Fld (6, 10)	/* Vertical Synchronization pulse - 1 */
-#define LCCR2_VrtSnchWdth(Tln)	(((Tln) - 1) << FShft (LCCR2_VSW))
-
-#define LCCR2_EFW	Fld (8, 16)	/* End-of-Frame line clock Wait */
-#define LCCR2_EndFrmDel(Tln)	((Tln) << FShft (LCCR2_EFW))
-
-#define LCCR2_BFW	Fld (8, 24)	/* Beginning-of-Frame line clock */
-#define LCCR2_BegFrmDel(Tln)	((Tln) << FShft (LCCR2_BFW))
-
-#define LCCR3_API	(0xf << 16)	/* AC Bias pin trasitions per interrupt */
-#define LCCR3_API_S	16
-#define LCCR3_VSP	(1 << 20)	/* vertical sync polarity */
-#define LCCR3_HSP	(1 << 21)	/* horizontal sync polarity */
-#define LCCR3_PCP	(1 << 22)	/* Pixel Clock Polarity (L_PCLK) */
-#define LCCR3_PixRsEdg	(LCCR3_PCP*0)	/*  Pixel clock Rising-Edge */
-#define LCCR3_PixFlEdg	(LCCR3_PCP*1)	/*  Pixel clock Falling-Edge */
-
-#define LCCR3_OEP	(1 << 23)	/* Output Enable Polarity */
-#define LCCR3_OutEnH	(LCCR3_OEP*0)	/*  Output Enable active High */
-#define LCCR3_OutEnL	(LCCR3_OEP*1)	/*  Output Enable active Low */
-
-#define LCCR3_DPC	(1 << 27)	/* double pixel clock mode */
-#define LCCR3_PCD	Fld (8, 0)	/* Pixel Clock Divisor */
-#define LCCR3_PixClkDiv(Div)	(((Div) << FShft (LCCR3_PCD)))
-
-#define LCCR3_BPP	Fld (3, 24)	/* Bit Per Pixel */
-#define LCCR3_Bpp(Bpp)	(((Bpp) << FShft (LCCR3_BPP)))
-
-#define LCCR3_ACB	Fld (8, 8)	/* AC Bias */
-#define LCCR3_Acb(Acb)	(((Acb) << FShft (LCCR3_ACB)))
-
-#define LCCR3_HorSnchH	(LCCR3_HSP*0)	/*  HSP Active High */
-#define LCCR3_HorSnchL	(LCCR3_HSP*1)	/*  HSP Active Low */
-
-#define LCCR3_VrtSnchH	(LCCR3_VSP*0)	/*  VSP Active High */
-#define LCCR3_VrtSnchL	(LCCR3_VSP*1)	/*  VSP Active Low */
-
-#define LCCR5_IUM(x)	(1 << ((x) + 23)) /* input underrun mask */
-#define LCCR5_BSM(x)	(1 << ((x) + 15)) /* branch mask */
-#define LCCR5_EOFM(x)	(1 << ((x) + 7))  /* end of frame mask */
-#define LCCR5_SOFM(x)	(1 << ((x) + 0))  /* start of frame mask */
-
-#define LCSR_LDD	(1 << 0)	/* LCD Disable Done */
-#define LCSR_SOF	(1 << 1)	/* Start of frame */
-#define LCSR_BER	(1 << 2)	/* Bus error */
-#define LCSR_ABC	(1 << 3)	/* AC Bias count */
-#define LCSR_IUL	(1 << 4)	/* input FIFO underrun Lower panel */
-#define LCSR_IUU	(1 << 5)	/* input FIFO underrun Upper panel */
-#define LCSR_OU		(1 << 6)	/* output FIFO underrun */
-#define LCSR_QD		(1 << 7)	/* quick disable */
-#define LCSR_EOF	(1 << 8)	/* end of frame */
-#define LCSR_BS		(1 << 9)	/* branch status */
-#define LCSR_SINT	(1 << 10)	/* subsequent interrupt */
-#define LCSR_RD_ST	(1 << 11)	/* read status */
-#define LCSR_CMD_INT	(1 << 12)	/* command interrupt */
-
-#define LDCMD_PAL	(1 << 26)	/* instructs DMA to load palette buffer */
-
-/* smartpanel related */
-#define PRSR_DATA(x)	((x) & 0xff)	/* Panel Data */
-#define PRSR_A0		(1 << 8)	/* Read Data Source */
-#define PRSR_ST_OK	(1 << 9)	/* Status OK */
-#define PRSR_CON_NT	(1 << 10)	/* Continue to Next Command */
-
-#define SMART_CMD_A0			 (0x1 << 8)
-#define SMART_CMD_READ_STATUS_REG	 (0x0 << 9)
-#define SMART_CMD_READ_FRAME_BUFFER	((0x0 << 9) | SMART_CMD_A0)
-#define SMART_CMD_WRITE_COMMAND		 (0x1 << 9)
-#define SMART_CMD_WRITE_DATA		((0x1 << 9) | SMART_CMD_A0)
-#define SMART_CMD_WRITE_FRAME		((0x2 << 9) | SMART_CMD_A0)
-#define SMART_CMD_WAIT_FOR_VSYNC	 (0x3 << 9)
-#define SMART_CMD_NOOP			 (0x4 << 9)
-#define SMART_CMD_INTERRUPT		 (0x5 << 9)
-
-#define SMART_CMD(x)	(SMART_CMD_WRITE_COMMAND | ((x) & 0xff))
-#define SMART_DAT(x)	(SMART_CMD_WRITE_DATA | ((x) & 0xff))
-#endif /* __ASM_ARCH_REGS_LCD_H */
diff --git a/include/asm-arm/arch-pxa/system.h b/include/asm-arm/arch-pxa/system.h
deleted file mode 100644
index 6956fc5235f8..000000000000
--- a/include/asm-arm/arch-pxa/system.h
+++ /dev/null
@@ -1,24 +0,0 @@
-/*
- * linux/include/asm-arm/arch-pxa/system.h
- *
- * Author:	Nicolas Pitre
- * Created:	Jun 15, 2001
- * Copyright:	MontaVista Software Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <asm/proc-fns.h>
-#include "hardware.h"
-#include "pxa2xx-regs.h"
-#include "pxa-regs.h"
-
-static inline void arch_idle(void)
-{
-	cpu_do_idle();
-}
-
-
-void arch_reset(char mode);
diff --git a/include/asm-arm/arch-pxa/timex.h b/include/asm-arm/arch-pxa/timex.h
deleted file mode 100644
index 8d882f0b6a16..000000000000
--- a/include/asm-arm/arch-pxa/timex.h
+++ /dev/null
@@ -1,26 +0,0 @@
-/*
- * linux/include/asm-arm/arch-pxa/timex.h
- *
- * Author:	Nicolas Pitre
- * Created:	Jun 15, 2001
- * Copyright:	MontaVista Software Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-
-#if defined(CONFIG_PXA25x)
-/* PXA250/210 timer base */
-#define CLOCK_TICK_RATE 3686400
-#elif defined(CONFIG_PXA27x)
-/* PXA27x timer base */
-#ifdef CONFIG_MACH_MAINSTONE
-#define CLOCK_TICK_RATE 3249600
-#else
-#define CLOCK_TICK_RATE 3250000
-#endif
-#else
-#define CLOCK_TICK_RATE 3250000
-#endif
diff --git a/include/asm-arm/arch-pxa/udc.h b/include/asm-arm/arch-pxa/udc.h
deleted file mode 100644
index 27aa3a91012f..000000000000
--- a/include/asm-arm/arch-pxa/udc.h
+++ /dev/null
@@ -1,8 +0,0 @@
-/*
- * linux/include/asm-arm/arch-pxa/udc.h
- *
- */
-#include <asm/mach/udc_pxa2xx.h>
-
-extern void pxa_set_udc_info(struct pxa2xx_udc_mach_info *info);
-
diff --git a/include/asm-arm/arch-pxa/uncompress.h b/include/asm-arm/arch-pxa/uncompress.h
deleted file mode 100644
index f4551269aaf2..000000000000
--- a/include/asm-arm/arch-pxa/uncompress.h
+++ /dev/null
@@ -1,45 +0,0 @@
-/*
- * linux/include/asm-arm/arch-pxa/uncompress.h
- *
- * Author:	Nicolas Pitre
- * Copyright:	(C) 2001 MontaVista Software Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/serial_reg.h>
-#include <asm/arch/pxa-regs.h>
-#include <asm/mach-types.h>
-
-#define __REG(x)       ((volatile unsigned long *)x)
-
-static volatile unsigned long *UART = FFUART;
-
-static inline void putc(char c)
-{
-	if (!(UART[UART_IER] & IER_UUE))
-		return;
-	while (!(UART[UART_LSR] & LSR_TDRQ))
-		barrier();
-	UART[UART_TX] = c;
-}
-
-/*
- * This does not append a newline
- */
-static inline void flush(void)
-{
-}
-
-static inline void arch_decomp_setup(void)
-{
-	if (machine_is_littleton())
-		UART = STUART;
-}
-
-/*
- * nothing to do
- */
-#define arch_decomp_wdog()
diff --git a/include/asm-arm/arch-pxa/vmalloc.h b/include/asm-arm/arch-pxa/vmalloc.h
deleted file mode 100644
index 5bb450c7aa2c..000000000000
--- a/include/asm-arm/arch-pxa/vmalloc.h
+++ /dev/null
@@ -1,11 +0,0 @@
-/*
- * linux/include/asm-arm/arch-pxa/vmalloc.h
- *
- * Author:	Nicolas Pitre
- * Copyright:	(C) 2001 MontaVista Software Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#define VMALLOC_END       (0xe8000000)
diff --git a/include/asm-arm/arch-realview/debug-macro.S b/include/asm-arm/arch-realview/debug-macro.S
deleted file mode 100644
index c8c860c3c26e..000000000000
--- a/include/asm-arm/arch-realview/debug-macro.S
+++ /dev/null
@@ -1,22 +0,0 @@
-/* linux/include/asm-arm/arch-realview/debug-macro.S
- *
- * Debugging macro include header
- *
- *  Copyright (C) 1994-1999 Russell King
- *  Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
-*/
-
-		.macro	addruart,rx
-		mrc	p15, 0, \rx, c1, c0
-		tst	\rx, #1			@ MMU enabled?
-		moveq	\rx,      #0x10000000
-		movne	\rx,      #0xf0000000	@ virtual base
-		orr	\rx, \rx, #0x00009000
-		.endm
-
-#include <asm/hardware/debug-pl01x.S>
diff --git a/include/asm-arm/arch-realview/dma.h b/include/asm-arm/arch-realview/dma.h
deleted file mode 100644
index 8342e3f9d6ec..000000000000
--- a/include/asm-arm/arch-realview/dma.h
+++ /dev/null
@@ -1,20 +0,0 @@
-/*
- *  linux/include/asm-arm/arch-realview/dma.h
- *
- *  Copyright (C) 2003 ARM Limited.
- *  Copyright (C) 1997,1998 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
diff --git a/include/asm-arm/arch-realview/entry-macro.S b/include/asm-arm/arch-realview/entry-macro.S
deleted file mode 100644
index cd26306d8e57..000000000000
--- a/include/asm-arm/arch-realview/entry-macro.S
+++ /dev/null
@@ -1,81 +0,0 @@
-/*
- * include/asm-arm/arch-realview/entry-macro.S
- *
- * Low-level IRQ helper macros for RealView platforms
- *
- * This file is licensed under  the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-#include <asm/hardware.h>
-#include <asm/hardware/gic.h>
-
-		.macro	disable_fiq
-		.endm
-
-		.macro  get_irqnr_preamble, base, tmp
-		ldr	\base, =gic_cpu_base_addr
-		ldr	\base, [\base]
-		.endm
-
-		.macro  arch_ret_to_user, tmp1, tmp2
-		.endm
-
-		/*
-		 * The interrupt numbering scheme is defined in the
-		 * interrupt controller spec.  To wit:
-		 *
-		 * Interrupts 0-15 are IPI
-		 * 16-28 are reserved
-		 * 29-31 are local.  We allow 30 to be used for the watchdog.
-		 * 32-1020 are global
-		 * 1021-1022 are reserved
-		 * 1023 is "spurious" (no interrupt)
-		 *
-		 * For now, we ignore all local interrupts so only return an interrupt if it's
-		 * between 30 and 1020.  The test_for_ipi routine below will pick up on IPIs.
-		 *
-		 * A simple read from the controller will tell us the number of the highest
-                 * priority enabled interrupt.  We then just need to check whether it is in the
-		 * valid range for an IRQ (30-1020 inclusive).
-		 */
-
-		.macro  get_irqnr_and_base, irqnr, irqstat, base, tmp
-
-		ldr     \irqstat, [\base, #GIC_CPU_INTACK] /* bits 12-10 = src CPU, 9-0 = int # */
-
-		ldr	\tmp, =1021
-
-		bic     \irqnr, \irqstat, #0x1c00
-
-		cmp     \irqnr, #29
-		cmpcc	\irqnr, \irqnr
-		cmpne	\irqnr, \tmp
-		cmpcs	\irqnr, \irqnr
-
-		.endm
-
-		/* We assume that irqstat (the raw value of the IRQ acknowledge
-		 * register) is preserved from the macro above.
-		 * If there is an IPI, we immediately signal end of interrupt on the
-		 * controller, since this requires the original irqstat value which
-		 * we won't easily be able to recreate later.
-		 */
-
-		.macro test_for_ipi, irqnr, irqstat, base, tmp
-		bic	\irqnr, \irqstat, #0x1c00
-		cmp	\irqnr, #16
-		strcc	\irqstat, [\base, #GIC_CPU_EOI]
-		cmpcs	\irqnr, \irqnr
-		.endm
-
-		/* As above, this assumes that irqstat and base are preserved.. */
-
-		.macro test_for_ltirq, irqnr, irqstat, base, tmp
-		bic	\irqnr, \irqstat, #0x1c00
-		mov 	\tmp, #0
-		cmp	\irqnr, #29
-		moveq	\tmp, #1
-		streq	\irqstat, [\base, #GIC_CPU_EOI]
-		cmp	\tmp, #0
-		.endm
diff --git a/include/asm-arm/arch-realview/hardware.h b/include/asm-arm/arch-realview/hardware.h
deleted file mode 100644
index 1ee8313ceb6a..000000000000
--- a/include/asm-arm/arch-realview/hardware.h
+++ /dev/null
@@ -1,31 +0,0 @@
-/*
- *  linux/include/asm-arm/arch-realview/hardware.h
- *
- *  This file contains the hardware definitions of the RealView boards.
- *
- *  Copyright (C) 2003 ARM Limited.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-#ifndef __ASM_ARCH_HARDWARE_H
-#define __ASM_ARCH_HARDWARE_H
-
-#include <asm/sizes.h>
-
-/* macro to get at IO space when running virtually */
-#define IO_ADDRESS(x)		(((x) & 0x0fffffff) + 0xf0000000)
-#define __io_address(n)		__io(IO_ADDRESS(n))
-
-#endif
diff --git a/include/asm-arm/arch-realview/io.h b/include/asm-arm/arch-realview/io.h
deleted file mode 100644
index c70f1dfbe135..000000000000
--- a/include/asm-arm/arch-realview/io.h
+++ /dev/null
@@ -1,33 +0,0 @@
-/*
- *  linux/include/asm-arm/arch-realview/io.h
- *
- *  Copyright (C) 2003 ARM Limited
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-#ifndef __ASM_ARM_ARCH_IO_H
-#define __ASM_ARM_ARCH_IO_H
-
-#define IO_SPACE_LIMIT 0xffffffff
-
-static inline void __iomem *__io(unsigned long addr)
-{
-	return (void __iomem *)addr;
-}
-
-#define __io(a)			__io(a)
-#define __mem_pci(a)		(a)
-
-#endif
diff --git a/include/asm-arm/arch-realview/irqs.h b/include/asm-arm/arch-realview/irqs.h
deleted file mode 100644
index ccbac59235c6..000000000000
--- a/include/asm-arm/arch-realview/irqs.h
+++ /dev/null
@@ -1,38 +0,0 @@
-/*
- *  linux/include/asm-arm/arch-realview/irqs.h
- *
- *  Copyright (C) 2003 ARM Limited
- *  Copyright (C) 2000 Deep Blue Solutions Ltd.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#ifndef __ASM_ARCH_IRQS_H
-#define __ASM_ARCH_IRQS_H
-
-#include <asm/arch/board-eb.h>
-#include <asm/arch/board-pb11mp.h>
-#include <asm/arch/board-pb1176.h>
-
-#define IRQ_LOCALTIMER		29
-#define IRQ_LOCALWDOG		30
-
-#define IRQ_GIC_START		32
-
-#ifndef NR_IRQS
-#error "NR_IRQS not defined by the board-specific files"
-#endif
-
-#endif
diff --git a/include/asm-arm/arch-realview/memory.h b/include/asm-arm/arch-realview/memory.h
deleted file mode 100644
index ed370abb638f..000000000000
--- a/include/asm-arm/arch-realview/memory.h
+++ /dev/null
@@ -1,38 +0,0 @@
-/*
- *  linux/include/asm-arm/arch-realview/memory.h
- *
- *  Copyright (C) 2003 ARM Limited
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-#ifndef __ASM_ARCH_MEMORY_H
-#define __ASM_ARCH_MEMORY_H
-
-/*
- * Physical DRAM offset.
- */
-#define PHYS_OFFSET		UL(0x00000000)
-
-/*
- * Virtual view <-> DMA view memory address translations
- * virt_to_bus: Used to translate the virtual address to an
- *              address suitable to be passed to set_dma_addr
- * bus_to_virt: Used to convert an address for DMA operations
- *              to an address that the kernel can use.
- */
-#define __virt_to_bus(x)	((x) - PAGE_OFFSET)
-#define __bus_to_virt(x)	((x) + PAGE_OFFSET)
-
-#endif
diff --git a/include/asm-arm/arch-realview/platform.h b/include/asm-arm/arch-realview/platform.h
deleted file mode 100644
index 424c0aaf46a0..000000000000
--- a/include/asm-arm/arch-realview/platform.h
+++ /dev/null
@@ -1,293 +0,0 @@
-/*
- * linux/include/asm-arm/arch-realview/platform.h
- *
- * Copyright (c) ARM Limited 2003.  All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#ifndef __ASM_ARCH_PLATFORM_H
-#define __ASM_ARCH_PLATFORM_H
-
-/*
- * Memory definitions
- */
-#define REALVIEW_BOOT_ROM_LO          0x30000000		/* DoC Base (64Mb)...*/
-#define REALVIEW_BOOT_ROM_HI          0x30000000
-#define REALVIEW_BOOT_ROM_BASE        REALVIEW_BOOT_ROM_HI	 /*  Normal position */
-#define REALVIEW_BOOT_ROM_SIZE        SZ_64M
-
-#define REALVIEW_SSRAM_BASE           /* REALVIEW_SSMC_BASE ? */
-#define REALVIEW_SSRAM_SIZE           SZ_2M
-
-/* 
- *  SDRAM
- */
-#define REALVIEW_SDRAM_BASE           0x00000000
-
-/* 
- *  Logic expansion modules
- * 
- */
-
-
-/* ------------------------------------------------------------------------
- *  RealView Registers
- * ------------------------------------------------------------------------
- * 
- */
-#define REALVIEW_SYS_ID_OFFSET               0x00
-#define REALVIEW_SYS_SW_OFFSET               0x04
-#define REALVIEW_SYS_LED_OFFSET              0x08
-#define REALVIEW_SYS_OSC0_OFFSET             0x0C
-
-#define REALVIEW_SYS_OSC1_OFFSET             0x10
-#define REALVIEW_SYS_OSC2_OFFSET             0x14
-#define REALVIEW_SYS_OSC3_OFFSET             0x18
-#define REALVIEW_SYS_OSC4_OFFSET             0x1C	/* OSC1 for RealView/AB */
-
-#define REALVIEW_SYS_LOCK_OFFSET             0x20
-#define REALVIEW_SYS_100HZ_OFFSET            0x24
-#define REALVIEW_SYS_CFGDATA1_OFFSET         0x28
-#define REALVIEW_SYS_CFGDATA2_OFFSET         0x2C
-#define REALVIEW_SYS_FLAGS_OFFSET            0x30
-#define REALVIEW_SYS_FLAGSSET_OFFSET         0x30
-#define REALVIEW_SYS_FLAGSCLR_OFFSET         0x34
-#define REALVIEW_SYS_NVFLAGS_OFFSET          0x38
-#define REALVIEW_SYS_NVFLAGSSET_OFFSET       0x38
-#define REALVIEW_SYS_NVFLAGSCLR_OFFSET       0x3C
-#define REALVIEW_SYS_RESETCTL_OFFSET         0x40
-#define REALVIEW_SYS_PCICTL_OFFSET           0x44
-#define REALVIEW_SYS_MCI_OFFSET              0x48
-#define REALVIEW_SYS_FLASH_OFFSET            0x4C
-#define REALVIEW_SYS_CLCD_OFFSET             0x50
-#define REALVIEW_SYS_CLCDSER_OFFSET          0x54
-#define REALVIEW_SYS_BOOTCS_OFFSET           0x58
-#define REALVIEW_SYS_24MHz_OFFSET            0x5C
-#define REALVIEW_SYS_MISC_OFFSET             0x60
-#define REALVIEW_SYS_IOSEL_OFFSET            0x70
-#define REALVIEW_SYS_PROCID_OFFSET           0x84
-#define REALVIEW_SYS_TEST_OSC0_OFFSET        0xC0
-#define REALVIEW_SYS_TEST_OSC1_OFFSET        0xC4
-#define REALVIEW_SYS_TEST_OSC2_OFFSET        0xC8
-#define REALVIEW_SYS_TEST_OSC3_OFFSET        0xCC
-#define REALVIEW_SYS_TEST_OSC4_OFFSET        0xD0
-
-#define REALVIEW_SYS_BASE                    0x10000000
-#define REALVIEW_SYS_ID                      (REALVIEW_SYS_BASE + REALVIEW_SYS_ID_OFFSET)
-#define REALVIEW_SYS_SW                      (REALVIEW_SYS_BASE + REALVIEW_SYS_SW_OFFSET)
-#define REALVIEW_SYS_LED                     (REALVIEW_SYS_BASE + REALVIEW_SYS_LED_OFFSET)
-#define REALVIEW_SYS_OSC0                    (REALVIEW_SYS_BASE + REALVIEW_SYS_OSC0_OFFSET)
-#define REALVIEW_SYS_OSC1                    (REALVIEW_SYS_BASE + REALVIEW_SYS_OSC1_OFFSET)
-
-#define REALVIEW_SYS_LOCK                    (REALVIEW_SYS_BASE + REALVIEW_SYS_LOCK_OFFSET)
-#define REALVIEW_SYS_100HZ                   (REALVIEW_SYS_BASE + REALVIEW_SYS_100HZ_OFFSET)
-#define REALVIEW_SYS_CFGDATA1                (REALVIEW_SYS_BASE + REALVIEW_SYS_CFGDATA1_OFFSET)
-#define REALVIEW_SYS_CFGDATA2                (REALVIEW_SYS_BASE + REALVIEW_SYS_CFGDATA2_OFFSET)
-#define REALVIEW_SYS_FLAGS                   (REALVIEW_SYS_BASE + REALVIEW_SYS_FLAGS_OFFSET)
-#define REALVIEW_SYS_FLAGSSET                (REALVIEW_SYS_BASE + REALVIEW_SYS_FLAGSSET_OFFSET)
-#define REALVIEW_SYS_FLAGSCLR                (REALVIEW_SYS_BASE + REALVIEW_SYS_FLAGSCLR_OFFSET)
-#define REALVIEW_SYS_NVFLAGS                 (REALVIEW_SYS_BASE + REALVIEW_SYS_NVFLAGS_OFFSET)
-#define REALVIEW_SYS_NVFLAGSSET              (REALVIEW_SYS_BASE + REALVIEW_SYS_NVFLAGSSET_OFFSET)
-#define REALVIEW_SYS_NVFLAGSCLR              (REALVIEW_SYS_BASE + REALVIEW_SYS_NVFLAGSCLR_OFFSET)
-#define REALVIEW_SYS_RESETCTL                (REALVIEW_SYS_BASE + REALVIEW_SYS_RESETCTL_OFFSET)
-#define REALVIEW_SYS_PCICTL                  (REALVIEW_SYS_BASE + REALVIEW_SYS_PCICTL_OFFSET)
-#define REALVIEW_SYS_MCI                     (REALVIEW_SYS_BASE + REALVIEW_SYS_MCI_OFFSET)
-#define REALVIEW_SYS_FLASH                   (REALVIEW_SYS_BASE + REALVIEW_SYS_FLASH_OFFSET)
-#define REALVIEW_SYS_CLCD                    (REALVIEW_SYS_BASE + REALVIEW_SYS_CLCD_OFFSET)
-#define REALVIEW_SYS_CLCDSER                 (REALVIEW_SYS_BASE + REALVIEW_SYS_CLCDSER_OFFSET)
-#define REALVIEW_SYS_BOOTCS                  (REALVIEW_SYS_BASE + REALVIEW_SYS_BOOTCS_OFFSET)
-#define REALVIEW_SYS_24MHz                   (REALVIEW_SYS_BASE + REALVIEW_SYS_24MHz_OFFSET)
-#define REALVIEW_SYS_MISC                    (REALVIEW_SYS_BASE + REALVIEW_SYS_MISC_OFFSET)
-#define REALVIEW_SYS_IOSEL                   (REALVIEW_SYS_BASE + REALVIEW_SYS_IOSEL_OFFSET)
-#define REALVIEW_SYS_PROCID                  (REALVIEW_SYS_BASE + REALVIEW_SYS_PROCID_OFFSET)
-#define REALVIEW_SYS_TEST_OSC0               (REALVIEW_SYS_BASE + REALVIEW_SYS_TEST_OSC0_OFFSET)
-#define REALVIEW_SYS_TEST_OSC1               (REALVIEW_SYS_BASE + REALVIEW_SYS_TEST_OSC1_OFFSET)
-#define REALVIEW_SYS_TEST_OSC2               (REALVIEW_SYS_BASE + REALVIEW_SYS_TEST_OSC2_OFFSET)
-#define REALVIEW_SYS_TEST_OSC3               (REALVIEW_SYS_BASE + REALVIEW_SYS_TEST_OSC3_OFFSET)
-#define REALVIEW_SYS_TEST_OSC4               (REALVIEW_SYS_BASE + REALVIEW_SYS_TEST_OSC4_OFFSET)
-
-/* 
- * Values for REALVIEW_SYS_RESET_CTRL
- */
-#define REALVIEW_SYS_CTRL_RESET_CONFIGCLR    0x01
-#define REALVIEW_SYS_CTRL_RESET_CONFIGINIT   0x02
-#define REALVIEW_SYS_CTRL_RESET_DLLRESET     0x03
-#define REALVIEW_SYS_CTRL_RESET_PLLRESET     0x04
-#define REALVIEW_SYS_CTRL_RESET_POR          0x05
-#define REALVIEW_SYS_CTRL_RESET_DoC          0x06
-
-#define REALVIEW_SYS_CTRL_LED         (1 << 0)
-
-
-/* ------------------------------------------------------------------------
- *  RealView control registers
- * ------------------------------------------------------------------------
- */
-
-/* 
- * REALVIEW_IDFIELD
- *
- * 31:24 = manufacturer (0x41 = ARM)
- * 23:16 = architecture (0x08 = AHB system bus, ASB processor bus)
- * 15:12 = FPGA (0x3 = XVC600 or XVC600E)
- * 11:4  = build value
- * 3:0   = revision number (0x1 = rev B (AHB))
- */
-
-/*
- * REALVIEW_SYS_LOCK
- *     control access to SYS_OSCx, SYS_CFGDATAx, SYS_RESETCTL, 
- *     SYS_CLD, SYS_BOOTCS
- */
-#define REALVIEW_SYS_LOCK_LOCKED    (1 << 16)
-#define REALVIEW_SYS_LOCKVAL_MASK	0xFFFF		/* write 0xA05F to enable write access */
-
-/*
- * REALVIEW_SYS_FLASH
- */
-#define REALVIEW_FLASHPROG_FLVPPEN	(1 << 0)	/* Enable writing to flash */
-
-/*
- * REALVIEW_INTREG
- *     - used to acknowledge and control MMCI and UART interrupts 
- */
-#define REALVIEW_INTREG_WPROT        0x00    /* MMC protection status (no interrupt generated) */
-#define REALVIEW_INTREG_RI0          0x01    /* Ring indicator UART0 is asserted,              */
-#define REALVIEW_INTREG_CARDIN       0x08    /* MMCI card in detect                            */
-                                                /* write 1 to acknowledge and clear               */
-#define REALVIEW_INTREG_RI1          0x02    /* Ring indicator UART1 is asserted,              */
-#define REALVIEW_INTREG_CARDINSERT   0x03    /* Signal insertion of MMC card                   */
-
-/*
- * RealView common peripheral addresses
- */
-#define REALVIEW_SCTL_BASE            0x10001000	/* System controller */
-#define REALVIEW_I2C_BASE             0x10002000	/* I2C control */
-#define REALVIEW_AACI_BASE            0x10004000	/* Audio */
-#define REALVIEW_MMCI0_BASE           0x10005000	/* MMC interface */
-#define REALVIEW_KMI0_BASE            0x10006000	/* KMI interface */
-#define REALVIEW_KMI1_BASE            0x10007000	/* KMI 2nd interface */
-#define REALVIEW_CHAR_LCD_BASE        0x10008000	/* Character LCD */
-#define REALVIEW_SCI_BASE             0x1000E000	/* Smart card controller */
-#define REALVIEW_GPIO1_BASE           0x10014000	/* GPIO port 1 */
-#define REALVIEW_GPIO2_BASE           0x10015000	/* GPIO port 2 */
-#define REALVIEW_DMC_BASE             0x10018000	/* DMC configuration */
-#define REALVIEW_DMAC_BASE            0x10030000	/* DMA controller */
-
-/* PCI space */
-#define REALVIEW_PCI_BASE             0x41000000	/* PCI Interface */
-#define REALVIEW_PCI_CFG_BASE	      0x42000000
-#define REALVIEW_PCI_MEM_BASE0        0x44000000
-#define REALVIEW_PCI_MEM_BASE1        0x50000000
-#define REALVIEW_PCI_MEM_BASE2        0x60000000
-/* Sizes of above maps */
-#define REALVIEW_PCI_BASE_SIZE	       0x01000000
-#define REALVIEW_PCI_CFG_BASE_SIZE    0x02000000
-#define REALVIEW_PCI_MEM_BASE0_SIZE   0x0c000000	/* 32Mb */
-#define REALVIEW_PCI_MEM_BASE1_SIZE   0x10000000	/* 256Mb */
-#define REALVIEW_PCI_MEM_BASE2_SIZE   0x10000000	/* 256Mb */
-
-#define REALVIEW_SDRAM67_BASE         0x70000000	/* SDRAM banks 6 and 7 */
-#define REALVIEW_LT_BASE              0x80000000	/* Logic Tile expansion */
-
-/*
- * Disk on Chip
- */
-#define REALVIEW_DOC_BASE             0x2C000000
-#define REALVIEW_DOC_SIZE             (16 << 20)
-#define REALVIEW_DOC_PAGE_SIZE        512
-#define REALVIEW_DOC_TOTAL_PAGES     (DOC_SIZE / PAGE_SIZE)
-
-#define ERASE_UNIT_PAGES    32
-#define START_PAGE          0x80
-
-/* 
- *  LED settings, bits [7:0]
- */
-#define REALVIEW_SYS_LED0             (1 << 0)
-#define REALVIEW_SYS_LED1             (1 << 1)
-#define REALVIEW_SYS_LED2             (1 << 2)
-#define REALVIEW_SYS_LED3             (1 << 3)
-#define REALVIEW_SYS_LED4             (1 << 4)
-#define REALVIEW_SYS_LED5             (1 << 5)
-#define REALVIEW_SYS_LED6             (1 << 6)
-#define REALVIEW_SYS_LED7             (1 << 7)
-
-#define ALL_LEDS                  0xFF
-
-#define LED_BANK                  REALVIEW_SYS_LED
-
-/* 
- * Control registers
- */
-#define REALVIEW_IDFIELD_OFFSET	0x0	/* RealView build information */
-#define REALVIEW_FLASHPROG_OFFSET	0x4	/* Flash devices */
-#define REALVIEW_INTREG_OFFSET		0x8	/* Interrupt control */
-#define REALVIEW_DECODE_OFFSET		0xC	/* Fitted logic modules */
-
-/* 
- *  Application Flash
- * 
- */
-#define FLASH_BASE                      REALVIEW_FLASH_BASE
-#define FLASH_SIZE                      REALVIEW_FLASH_SIZE
-#define FLASH_END                       (FLASH_BASE + FLASH_SIZE - 1)
-#define FLASH_BLOCK_SIZE                SZ_128K
-
-/* 
- *  Boot Flash
- * 
- */
-#define EPROM_BASE                      REALVIEW_BOOT_ROM_HI
-#define EPROM_SIZE                      REALVIEW_BOOT_ROM_SIZE
-#define EPROM_END                       (EPROM_BASE + EPROM_SIZE - 1)
-
-/* 
- *  Clean base - dummy
- * 
- */
-#define CLEAN_BASE                      EPROM_BASE
-
-/*
- * System controller bit assignment
- */
-#define REALVIEW_REFCLK	0
-#define REALVIEW_TIMCLK	1
-
-#define REALVIEW_TIMER1_EnSel	15
-#define REALVIEW_TIMER2_EnSel	17
-#define REALVIEW_TIMER3_EnSel	19
-#define REALVIEW_TIMER4_EnSel	21
-
-
-#define MAX_TIMER                       2
-#define MAX_PERIOD                      699050
-#define TICKS_PER_uSEC                  1
-
-/* 
- *  These are useconds NOT ticks.  
- * 
- */
-#define mSEC_1                          1000
-#define mSEC_5                          (mSEC_1 * 5)
-#define mSEC_10                         (mSEC_1 * 10)
-#define mSEC_25                         (mSEC_1 * 25)
-#define SEC_1                           (mSEC_1 * 1000)
-
-#define REALVIEW_CSR_BASE             0x10000000
-#define REALVIEW_CSR_SIZE             0x10000000
-
-#endif	/* __ASM_ARCH_PLATFORM_H */
diff --git a/include/asm-arm/arch-realview/system.h b/include/asm-arm/arch-realview/system.h
deleted file mode 100644
index 6f3d0ce0ca1e..000000000000
--- a/include/asm-arm/arch-realview/system.h
+++ /dev/null
@@ -1,51 +0,0 @@
-/*
- *  linux/include/asm-arm/arch-realview/system.h
- *
- *  Copyright (C) 2003 ARM Limited
- *  Copyright (C) 2000 Deep Blue Solutions Ltd
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-#ifndef __ASM_ARCH_SYSTEM_H
-#define __ASM_ARCH_SYSTEM_H
-
-#include <asm/hardware.h>
-#include <asm/io.h>
-#include <asm/arch/platform.h>
-
-static inline void arch_idle(void)
-{
-	/*
-	 * This should do all the clock switching
-	 * and wait for interrupt tricks
-	 */
-	cpu_do_idle();
-}
-
-static inline void arch_reset(char mode)
-{
-	void __iomem *hdr_ctrl = __io_address(REALVIEW_SYS_BASE) + REALVIEW_SYS_RESETCTL_OFFSET;
-	unsigned int val;
-
-	/*
-	 * To reset, we hit the on-board reset register
-	 * in the system FPGA
-	 */
-	val = __raw_readl(hdr_ctrl);
-	val |= REALVIEW_SYS_CTRL_RESET_CONFIGCLR;
-	__raw_writel(val, hdr_ctrl);
-}
-
-#endif
diff --git a/include/asm-arm/arch-realview/timex.h b/include/asm-arm/arch-realview/timex.h
deleted file mode 100644
index 5b9d82d0a5e0..000000000000
--- a/include/asm-arm/arch-realview/timex.h
+++ /dev/null
@@ -1,23 +0,0 @@
-/*
- *  linux/include/asm-arm/arch-realview/timex.h
- *
- *  RealView architecture timex specifications
- *
- *  Copyright (C) 2003 ARM Limited
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#define CLOCK_TICK_RATE		(50000000 / 16)
diff --git a/include/asm-arm/arch-realview/uncompress.h b/include/asm-arm/arch-realview/uncompress.h
deleted file mode 100644
index 4c905d7a13a1..000000000000
--- a/include/asm-arm/arch-realview/uncompress.h
+++ /dev/null
@@ -1,72 +0,0 @@
-/*
- *  linux/include/asm-arm/arch-realview/uncompress.h
- *
- *  Copyright (C) 2003 ARM Limited
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-#include <asm/hardware.h>
-#include <asm/mach-types.h>
-
-#include <asm/arch/board-eb.h>
-#include <asm/arch/board-pb11mp.h>
-#include <asm/arch/board-pb1176.h>
-
-#define AMBA_UART_DR(base)	(*(volatile unsigned char *)((base) + 0x00))
-#define AMBA_UART_LCRH(base)	(*(volatile unsigned char *)((base) + 0x2c))
-#define AMBA_UART_CR(base)	(*(volatile unsigned char *)((base) + 0x30))
-#define AMBA_UART_FR(base)	(*(volatile unsigned char *)((base) + 0x18))
-
-/*
- * Return the UART base address
- */
-static inline unsigned long get_uart_base(void)
-{
-	if (machine_is_realview_eb())
-		return REALVIEW_EB_UART0_BASE;
-	else if (machine_is_realview_pb11mp())
-		return REALVIEW_PB11MP_UART0_BASE;
-	else if (machine_is_realview_pb1176())
-		return REALVIEW_PB1176_UART0_BASE;
-	else
-		return 0;
-}
-
-/*
- * This does not append a newline
- */
-static inline void putc(int c)
-{
-	unsigned long base = get_uart_base();
-
-	while (AMBA_UART_FR(base) & (1 << 5))
-		barrier();
-
-	AMBA_UART_DR(base) = c;
-}
-
-static inline void flush(void)
-{
-	unsigned long base = get_uart_base();
-
-	while (AMBA_UART_FR(base) & (1 << 3))
-		barrier();
-}
-
-/*
- * nothing to do
- */
-#define arch_decomp_setup()
-#define arch_decomp_wdog()
diff --git a/include/asm-arm/arch-realview/vmalloc.h b/include/asm-arm/arch-realview/vmalloc.h
deleted file mode 100644
index 0ad49af186af..000000000000
--- a/include/asm-arm/arch-realview/vmalloc.h
+++ /dev/null
@@ -1,21 +0,0 @@
-/*
- *  linux/include/asm-arm/arch-realview/vmalloc.h
- *
- *  Copyright (C) 2003 ARM Limited
- *  Copyright (C) 2000 Russell King.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-#define VMALLOC_END		(PAGE_OFFSET + 0x18000000)
diff --git a/include/asm-arm/arch-rpc/debug-macro.S b/include/asm-arm/arch-rpc/debug-macro.S
deleted file mode 100644
index c634c8d8f4a1..000000000000
--- a/include/asm-arm/arch-rpc/debug-macro.S
+++ /dev/null
@@ -1,25 +0,0 @@
-/* linux/include/asm-arm/arch-rpc/debug-macro.S
- *
- * Debugging macro include header
- *
- *  Copyright (C) 1994-1999 Russell King
- *  Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
-*/
-
-		.macro	addruart,rx
-		mrc	p15, 0, \rx, c1, c0
-		tst	\rx, #1			@ MMU enabled?
-		moveq	\rx, #0x03000000
-		movne	\rx, #0xe0000000
-		orr	\rx, \rx, #0x00010000
-		orr	\rx, \rx, #0x00000fe0
-		.endm
-
-#define UART_SHIFT	2
-#define FLOW_CONTROL
-#include <asm/hardware/debug-8250.S>
diff --git a/include/asm-arm/arch-rpc/dma.h b/include/asm-arm/arch-rpc/dma.h
deleted file mode 100644
index d24a27e30b93..000000000000
--- a/include/asm-arm/arch-rpc/dma.h
+++ /dev/null
@@ -1,33 +0,0 @@
-/*
- *  linux/include/asm-arm/arch-rpc/dma.h
- *
- *  Copyright (C) 1997 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#ifndef __ASM_ARCH_DMA_H
-#define __ASM_ARCH_DMA_H
-
-/*
- * This is the maximum DMA address that can be DMAd to.
- * There should not be more than (0xd0000000 - 0xc0000000)
- * bytes of RAM.
- */
-#define MAX_DMA_ADDRESS		0xd0000000
-#define MAX_DMA_CHANNELS	8
-
-#define DMA_0			0
-#define DMA_1			1
-#define DMA_2			2
-#define DMA_3			3
-#define DMA_S0			4
-#define DMA_S1			5
-#define DMA_VIRTUAL_FLOPPY	6
-#define DMA_VIRTUAL_SOUND	7
-
-#define DMA_FLOPPY		DMA_VIRTUAL_FLOPPY
-
-#endif /* _ASM_ARCH_DMA_H */
-
diff --git a/include/asm-arm/arch-rpc/entry-macro.S b/include/asm-arm/arch-rpc/entry-macro.S
deleted file mode 100644
index 038b761fdadc..000000000000
--- a/include/asm-arm/arch-rpc/entry-macro.S
+++ /dev/null
@@ -1,16 +0,0 @@
-#include <asm/hardware.h>
-#include <asm/hardware/entry-macro-iomd.S>
-
-	.equ	ioc_base_high, IOC_BASE & 0xff000000
-	.equ	ioc_base_low, IOC_BASE & 0x00ff0000
-
-	.macro  get_irqnr_preamble, base, tmp
-	mov	\base, #ioc_base_high		@ point at IOC
-	.if	ioc_base_low
-	orr	\base, \base, #ioc_base_low
-	.endif
-	.endm
-
-	.macro  arch_ret_to_user, tmp1, tmp2
-	.endm
-
diff --git a/include/asm-arm/arch-rpc/hardware.h b/include/asm-arm/arch-rpc/hardware.h
deleted file mode 100644
index 7480f4e8d974..000000000000
--- a/include/asm-arm/arch-rpc/hardware.h
+++ /dev/null
@@ -1,83 +0,0 @@
-/*
- *  linux/include/asm-arm/arch-rpc/hardware.h
- *
- *  Copyright (C) 1996-1999 Russell King.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- *  This file contains the hardware definitions of the RiscPC series machines.
- */
-#ifndef __ASM_ARCH_HARDWARE_H
-#define __ASM_ARCH_HARDWARE_H
-
-#include <asm/arch/memory.h>
-
-#ifndef __ASSEMBLY__
-#define IOMEM(x) ((void __iomem *)(unsigned long)(x))
-#else
-#define IOMEM(x) x
-#endif /* __ASSEMBLY__ */
-
-/*
- * What hardware must be present
- */
-#define HAS_IOMD
-#define HAS_VIDC20
-
-/* Hardware addresses of major areas.
- *  *_START is the physical address
- *  *_SIZE  is the size of the region
- *  *_BASE  is the virtual address
- */
-#define RAM_SIZE		0x10000000
-#define RAM_START		0x10000000
-
-#define EASI_SIZE		0x08000000	/* EASI I/O */
-#define EASI_START		0x08000000
-#define EASI_BASE		0xe5000000
-
-#define IO_START		0x03000000	/* I/O */
-#define IO_SIZE			0x01000000
-#define IO_BASE			IOMEM(0xe0000000)
-
-#define SCREEN_START		0x02000000	/* VRAM */
-#define SCREEN_END		0xdfc00000
-#define SCREEN_BASE		0xdf800000
-
-#define UNCACHEABLE_ADDR	0xdf010000
-
-/*
- * IO Addresses
- */
-#define VIDC_BASE		IOMEM(0xe0400000)
-#define EXPMASK_BASE		0xe0360000
-#define IOMD_BASE		IOMEM(0xe0200000)
-#define IOC_BASE		IOMEM(0xe0200000)
-#define PCIO_BASE		IOMEM(0xe0010000)
-#define FLOPPYDMA_BASE		IOMEM(0xe002a000)
-
-#define vidc_writel(val)	__raw_writel(val, VIDC_BASE)
-
-#define IO_EC_EASI_BASE		0x81400000
-#define IO_EC_IOC4_BASE		0x8009c000
-#define IO_EC_IOC_BASE		0x80090000
-#define IO_EC_MEMC8_BASE	0x8000ac00
-#define IO_EC_MEMC_BASE		0x80000000
-
-#define NETSLOT_BASE		0x0302b000
-#define NETSLOT_SIZE		0x00001000
-
-#define PODSLOT_IOC0_BASE	0x03240000
-#define PODSLOT_IOC4_BASE	0x03270000
-#define PODSLOT_IOC_SIZE	(1 << 14)
-#define PODSLOT_MEMC_BASE	0x03000000
-#define PODSLOT_MEMC_SIZE	(1 << 14)
-#define PODSLOT_EASI_BASE	0x08000000
-#define PODSLOT_EASI_SIZE	(1 << 24)
-
-#define	EXPMASK_STATUS		(EXPMASK_BASE + 0x00)
-#define EXPMASK_ENABLE		(EXPMASK_BASE + 0x04)
-
-#endif
diff --git a/include/asm-arm/arch-rpc/io.h b/include/asm-arm/arch-rpc/io.h
deleted file mode 100644
index 6bd2295c0e01..000000000000
--- a/include/asm-arm/arch-rpc/io.h
+++ /dev/null
@@ -1,258 +0,0 @@
-/*
- *  linux/include/asm-arm/arch-rpc/io.h
- *
- *  Copyright (C) 1997 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * Modifications:
- *  06-Dec-1997	RMK	Created.
- */
-#ifndef __ASM_ARM_ARCH_IO_H
-#define __ASM_ARM_ARCH_IO_H
-
-#include <asm/hardware.h>
-
-#define IO_SPACE_LIMIT 0xffffffff
-
-/*
- * GCC is totally crap at loading/storing data.  We try to persuade it
- * to do the right thing by using these whereever possible instead of
- * the above.
- */
-#define __arch_base_getb(b,o)			\
- ({						\
-	unsigned int __v, __r = (b);		\
-	__asm__ __volatile__(			\
-		"ldrb	%0, [%1, %2]"		\
-		: "=r" (__v)			\
-		: "r" (__r), "Ir" (o));		\
-	__v;					\
- })
-
-#define __arch_base_getl(b,o)			\
- ({						\
-	unsigned int __v, __r = (b);		\
-	__asm__ __volatile__(			\
-		"ldr	%0, [%1, %2]"		\
-		: "=r" (__v)			\
-		: "r" (__r), "Ir" (o));		\
-	__v;					\
- })
-
-#define __arch_base_putb(v,b,o)			\
- ({						\
-	unsigned int __r = (b);			\
-	__asm__ __volatile__(			\
-		"strb	%0, [%1, %2]"		\
-		:				\
-		: "r" (v), "r" (__r), "Ir" (o));\
- })
-
-#define __arch_base_putl(v,b,o)			\
- ({						\
-	unsigned int __r = (b);			\
-	__asm__ __volatile__(			\
-		"str	%0, [%1, %2]"		\
-		:				\
-		: "r" (v), "r" (__r), "Ir" (o));\
- })
-
-/*
- * We use two different types of addressing - PC style addresses, and ARM
- * addresses.  PC style accesses the PC hardware with the normal PC IO
- * addresses, eg 0x3f8 for serial#1.  ARM addresses are 0x80000000+
- * and are translated to the start of IO.  Note that all addresses are
- * shifted left!
- */
-#define __PORT_PCIO(x)	(!((x) & 0x80000000))
-
-/*
- * Dynamic IO functions.
- */
-static inline void __outb (unsigned int value, unsigned int port)
-{
-	unsigned long temp;
-	__asm__ __volatile__(
-	"tst	%2, #0x80000000\n\t"
-	"mov	%0, %4\n\t"
-	"addeq	%0, %0, %3\n\t"
-	"strb	%1, [%0, %2, lsl #2]	@ outb"
-	: "=&r" (temp)
-	: "r" (value), "r" (port), "Ir" (PCIO_BASE - IO_BASE), "Ir" (IO_BASE)
-	: "cc");
-}
-
-static inline void __outw (unsigned int value, unsigned int port)
-{
-	unsigned long temp;
-	__asm__ __volatile__(
-	"tst	%2, #0x80000000\n\t"
-	"mov	%0, %4\n\t"
-	"addeq	%0, %0, %3\n\t"
-	"str	%1, [%0, %2, lsl #2]	@ outw"
-	: "=&r" (temp)
-	: "r" (value|value<<16), "r" (port), "Ir" (PCIO_BASE - IO_BASE), "Ir" (IO_BASE)
-	: "cc");
-}
-
-static inline void __outl (unsigned int value, unsigned int port)
-{
-	unsigned long temp;
-	__asm__ __volatile__(
-	"tst	%2, #0x80000000\n\t"
-	"mov	%0, %4\n\t"
-	"addeq	%0, %0, %3\n\t"
-	"str	%1, [%0, %2, lsl #2]	@ outl"
-	: "=&r" (temp)
-	: "r" (value), "r" (port), "Ir" (PCIO_BASE - IO_BASE), "Ir" (IO_BASE)
-	: "cc");
-}
-
-#define DECLARE_DYN_IN(sz,fnsuffix,instr)					\
-static inline unsigned sz __in##fnsuffix (unsigned int port)		\
-{										\
-	unsigned long temp, value;						\
-	__asm__ __volatile__(							\
-	"tst	%2, #0x80000000\n\t"						\
-	"mov	%0, %4\n\t"							\
-	"addeq	%0, %0, %3\n\t"							\
-	"ldr" instr "	%1, [%0, %2, lsl #2]	@ in" #fnsuffix			\
-	: "=&r" (temp), "=r" (value)						\
-	: "r" (port), "Ir" (PCIO_BASE - IO_BASE), "Ir" (IO_BASE)		\
-	: "cc");								\
-	return (unsigned sz)value;						\
-}
-
-static inline void __iomem *__deprecated __ioaddr(unsigned int port)
-{
-	void __iomem *ret;
-	if (__PORT_PCIO(port))
-		ret = PCIO_BASE;
-	else
-		ret = IO_BASE;
-	return ret + (port << 2);
-}
-
-#define DECLARE_IO(sz,fnsuffix,instr)	\
-	DECLARE_DYN_IN(sz,fnsuffix,instr)
-
-DECLARE_IO(char,b,"b")
-DECLARE_IO(short,w,"")
-DECLARE_IO(int,l,"")
-
-#undef DECLARE_IO
-#undef DECLARE_DYN_IN
-
-/*
- * Constant address IO functions
- *
- * These have to be macros for the 'J' constraint to work -
- * +/-4096 immediate operand.
- */
-#define __outbc(value,port)							\
-({										\
-	if (__PORT_PCIO((port)))						\
-		__asm__ __volatile__(						\
-		"strb	%0, [%1, %2]	@ outbc"				\
-		: : "r" (value), "r" (PCIO_BASE), "Jr" ((port) << 2));		\
-	else									\
-		__asm__ __volatile__(						\
-		"strb	%0, [%1, %2]	@ outbc"				\
-		: : "r" (value), "r" (IO_BASE), "r" ((port) << 2));		\
-})
-
-#define __inbc(port)								\
-({										\
-	unsigned char result;							\
-	if (__PORT_PCIO((port)))						\
-		__asm__ __volatile__(						\
-		"ldrb	%0, [%1, %2]	@ inbc"					\
-		: "=r" (result) : "r" (PCIO_BASE), "Jr" ((port) << 2));		\
-	else									\
-		__asm__ __volatile__(						\
-		"ldrb	%0, [%1, %2]	@ inbc"					\
-		: "=r" (result) : "r" (IO_BASE), "r" ((port) << 2));		\
-	result;									\
-})
-
-#define __outwc(value,port)							\
-({										\
-	unsigned long __v = value;						\
-	if (__PORT_PCIO((port)))						\
-		__asm__ __volatile__(						\
-		"str	%0, [%1, %2]	@ outwc"				\
-		: : "r" (__v|__v<<16), "r" (PCIO_BASE), "Jr" ((port) << 2));	\
-	else									\
-		__asm__ __volatile__(						\
-		"str	%0, [%1, %2]	@ outwc"				\
-		: : "r" (__v|__v<<16), "r" (IO_BASE), "r" ((port) << 2));		\
-})
-
-#define __inwc(port)								\
-({										\
-	unsigned short result;							\
-	if (__PORT_PCIO((port)))						\
-		__asm__ __volatile__(						\
-		"ldr	%0, [%1, %2]	@ inwc"					\
-		: "=r" (result) : "r" (PCIO_BASE), "Jr" ((port) << 2));		\
-	else									\
-		__asm__ __volatile__(						\
-		"ldr	%0, [%1, %2]	@ inwc"					\
-		: "=r" (result) : "r" (IO_BASE), "r" ((port) << 2));		\
-	result & 0xffff;							\
-})
-
-#define __outlc(value,port)							\
-({										\
-	unsigned long __v = value;						\
-	if (__PORT_PCIO((port)))						\
-		__asm__ __volatile__(						\
-		"str	%0, [%1, %2]	@ outlc"				\
-		: : "r" (__v), "r" (PCIO_BASE), "Jr" ((port) << 2));		\
-	else									\
-		__asm__ __volatile__(						\
-		"str	%0, [%1, %2]	@ outlc"				\
-		: : "r" (__v), "r" (IO_BASE), "r" ((port) << 2));		\
-})
-
-#define __inlc(port)								\
-({										\
-	unsigned long result;							\
-	if (__PORT_PCIO((port)))						\
-		__asm__ __volatile__(						\
-		"ldr	%0, [%1, %2]	@ inlc"					\
-		: "=r" (result) : "r" (PCIO_BASE), "Jr" ((port) << 2));		\
-	else									\
-		__asm__ __volatile__(						\
-		"ldr	%0, [%1, %2]	@ inlc"					\
-		: "=r" (result) : "r" (IO_BASE), "r" ((port) << 2));		\
-	result;									\
-})
-
-#define __ioaddrc(port)		__ioaddr(port)
-
-#define inb(p)	 	(__builtin_constant_p((p)) ? __inbc(p)    : __inb(p))
-#define inw(p)	 	(__builtin_constant_p((p)) ? __inwc(p)    : __inw(p))
-#define inl(p)	 	(__builtin_constant_p((p)) ? __inlc(p)    : __inl(p))
-#define outb(v,p)	(__builtin_constant_p((p)) ? __outbc(v,p) : __outb(v,p))
-#define outw(v,p)	(__builtin_constant_p((p)) ? __outwc(v,p) : __outw(v,p))
-#define outl(v,p)	(__builtin_constant_p((p)) ? __outlc(v,p) : __outl(v,p))
-#define __ioaddr(p)	(__builtin_constant_p((p)) ? __ioaddr(p)  : __ioaddrc(p))
-/* the following macro is deprecated */
-#define ioaddr(port)	((unsigned long)__ioaddr((port)))
-
-#define insb(p,d,l)	__raw_readsb(__ioaddr(p),d,l)
-#define insw(p,d,l)	__raw_readsw(__ioaddr(p),d,l)
-
-#define outsb(p,d,l)	__raw_writesb(__ioaddr(p),d,l)
-#define outsw(p,d,l)	__raw_writesw(__ioaddr(p),d,l)
-
-/*
- * 1:1 mapping for ioremapped regions.
- */
-#define __mem_pci(x)	(x)
-
-#endif
diff --git a/include/asm-arm/arch-rpc/irqs.h b/include/asm-arm/arch-rpc/irqs.h
deleted file mode 100644
index 27c35b05b27d..000000000000
--- a/include/asm-arm/arch-rpc/irqs.h
+++ /dev/null
@@ -1,46 +0,0 @@
-/*
- *  linux/include/asm-arm/arch-rpc/irqs.h
- *
- *  Copyright (C) 1996 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#define IRQ_PRINTER		0
-#define IRQ_BATLOW		1
-#define IRQ_FLOPPYINDEX		2
-#define IRQ_VSYNCPULSE		3
-#define IRQ_POWERON		4
-#define IRQ_TIMER0		5
-#define IRQ_TIMER1		6
-#define IRQ_IMMEDIATE		7
-#define IRQ_EXPCARDFIQ		8
-#define IRQ_HARDDISK		9
-#define IRQ_SERIALPORT		10
-#define IRQ_FLOPPYDISK		12
-#define IRQ_EXPANSIONCARD	13
-#define IRQ_KEYBOARDTX		14
-#define IRQ_KEYBOARDRX		15
-
-#define IRQ_DMA0		16
-#define IRQ_DMA1		17
-#define IRQ_DMA2		18
-#define IRQ_DMA3		19
-#define IRQ_DMAS0		20
-#define IRQ_DMAS1		21
-
-#define FIQ_FLOPPYDATA		0
-#define FIQ_ECONET		2
-#define FIQ_SERIALPORT		4
-#define FIQ_EXPANSIONCARD	6
-#define FIQ_FORCE		7
-
-/*
- * This is the offset of the FIQ "IRQ" numbers
- */
-#define FIQ_START		64
-
-#define IRQ_TIMER		IRQ_TIMER0
-
diff --git a/include/asm-arm/arch-rpc/memory.h b/include/asm-arm/arch-rpc/memory.h
deleted file mode 100644
index 303c424ce673..000000000000
--- a/include/asm-arm/arch-rpc/memory.h
+++ /dev/null
@@ -1,39 +0,0 @@
-/*
- *  linux/include/asm-arm/arch-rpc/memory.h
- *
- *  Copyright (C) 1996,1997,1998 Russell King.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- *  Changelog:
- *   20-Oct-1996 RMK	Created
- *   31-Dec-1997 RMK	Fixed definitions to reduce warnings
- *   11-Jan-1998 RMK	Uninlined to reduce hits on cache
- *   08-Feb-1998 RMK	Added __virt_to_bus and __bus_to_virt
- *   21-Mar-1999 RMK	Renamed to memory.h
- *		 RMK	Added TASK_SIZE and PAGE_OFFSET
- */
-#ifndef __ASM_ARCH_MEMORY_H
-#define __ASM_ARCH_MEMORY_H
-
-/*
- * Physical DRAM offset.
- */
-#define PHYS_OFFSET	UL(0x10000000)
-
-/*
- * These are exactly the same on the RiscPC as the
- * physical memory view.
- */
-#define __virt_to_bus(x) __virt_to_phys(x)
-#define __bus_to_virt(x) __phys_to_virt(x)
-
-/*
- * Cache flushing area - ROM
- */
-#define FLUSH_BASE_PHYS		0x00000000
-#define FLUSH_BASE		0xdf000000
-
-#endif
diff --git a/include/asm-arm/arch-rpc/system.h b/include/asm-arm/arch-rpc/system.h
deleted file mode 100644
index 729c2ae4b513..000000000000
--- a/include/asm-arm/arch-rpc/system.h
+++ /dev/null
@@ -1,27 +0,0 @@
-/*
- *  linux/include/asm-arm/arch-rpc/system.h
- *
- *  Copyright (C) 1996-1999 Russell King.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#include <asm/hardware.h>
-#include <asm/hardware/iomd.h>
-#include <asm/io.h>
-
-static inline void arch_idle(void)
-{
-	cpu_do_idle();
-}
-
-static inline void arch_reset(char mode)
-{
-	iomd_writeb(0, IOMD_ROMCR0);
-
-	/*
-	 * Jump into the ROM
-	 */
-	cpu_reset(0);
-}
diff --git a/include/asm-arm/arch-rpc/timex.h b/include/asm-arm/arch-rpc/timex.h
deleted file mode 100644
index ed7df64d960b..000000000000
--- a/include/asm-arm/arch-rpc/timex.h
+++ /dev/null
@@ -1,17 +0,0 @@
-/*
- *  linux/include/asm-arm/arch-rpc/timex.h
- *
- *  Copyright (C) 1997, 1998 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- *  RiscPC architecture timex specifications
- */
-
-/*
- * On the RiscPC, the clock ticks at 2MHz.
- */
-#define CLOCK_TICK_RATE		2000000
-
diff --git a/include/asm-arm/arch-rpc/uncompress.h b/include/asm-arm/arch-rpc/uncompress.h
deleted file mode 100644
index b8e29efd8c5b..000000000000
--- a/include/asm-arm/arch-rpc/uncompress.h
+++ /dev/null
@@ -1,198 +0,0 @@
-/*
- *  linux/include/asm-arm/arch-rpc/uncompress.h
- *
- *  Copyright (C) 1996 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#define VIDMEM ((char *)SCREEN_START)
- 
-#include <asm/hardware.h>
-#include <asm/io.h>
-#include <asm/setup.h>
-#include <asm/page.h>
-
-int video_size_row;
-unsigned char bytes_per_char_h;
-extern unsigned long con_charconvtable[256];
-
-struct param_struct {
-	unsigned long page_size;
-	unsigned long nr_pages;
-	unsigned long ramdisk_size;
-	unsigned long mountrootrdonly;
-	unsigned long rootdev;
-	unsigned long video_num_cols;
-	unsigned long video_num_rows;
-	unsigned long video_x;
-	unsigned long video_y;
-	unsigned long memc_control_reg;
-	unsigned char sounddefault;
-	unsigned char adfsdrives;
-	unsigned char bytes_per_char_h;
-	unsigned char bytes_per_char_v;
-	unsigned long unused[256/4-11];
-};
-
-static const unsigned long palette_4[16] = {
-	0x00000000,
-	0x000000cc,
-	0x0000cc00,             /* Green   */
-	0x0000cccc,             /* Yellow  */
-	0x00cc0000,             /* Blue    */
-	0x00cc00cc,             /* Magenta */
-	0x00cccc00,             /* Cyan    */
-	0x00cccccc,             /* White   */
-	0x00000000,
-	0x000000ff,
-	0x0000ff00,
-	0x0000ffff,
-	0x00ff0000,
-	0x00ff00ff,
-	0x00ffff00,
-	0x00ffffff
-};
-
-#define palette_setpixel(p)	*(unsigned long *)(IO_START+0x00400000) = 0x10000000|((p) & 255)
-#define palette_write(v)	*(unsigned long *)(IO_START+0x00400000) = 0x00000000|((v) & 0x00ffffff)
-
-/*
- * params_phys is a linker defined symbol - see
- * arch/arm/boot/compressed/Makefile
- */
-extern __attribute__((pure)) struct param_struct *params(void);
-#define params (params())
-
-#ifndef STANDALONE_DEBUG 
-static unsigned long video_num_cols;
-static unsigned long video_num_rows;
-static unsigned long video_x;
-static unsigned long video_y;
-static unsigned char bytes_per_char_v;
-static int white;
-
-/*
- * This does not append a newline
- */
-static void putc(int c)
-{
-	extern void ll_write_char(char *, char c, char white);
-	int x,y;
-	char *ptr;
-
-	x = video_x;
-	y = video_y;
-
-	if (c == '\n') {
-		if (++y >= video_num_rows)
-			y--;
-	} else if (c == '\r') {
-		x = 0;
-	} else {
-		ptr = VIDMEM + ((y*video_num_cols*bytes_per_char_v+x)*bytes_per_char_h);
-		ll_write_char(ptr, c, white);
-		if (++x >= video_num_cols) {
-			x = 0;
-			if ( ++y >= video_num_rows ) {
-				y--;
-			}
-		}
-	}
-
-	video_x = x;
-	video_y = y;
-}
-
-static inline void flush(void)
-{
-}
-
-static void error(char *x);
-
-/*
- * Setup for decompression
- */
-static void arch_decomp_setup(void)
-{
-	int i;
-	struct tag *t = (struct tag *)params;
-	unsigned int nr_pages = 0, page_size = PAGE_SIZE;
-
-	if (t->hdr.tag == ATAG_CORE)
-	{
-		for (; t->hdr.size; t = tag_next(t))
-		{
-			if (t->hdr.tag == ATAG_VIDEOTEXT)
-			{
-				video_num_rows = t->u.videotext.video_lines;
-				video_num_cols = t->u.videotext.video_cols;
-				bytes_per_char_h = t->u.videotext.video_points;
-				bytes_per_char_v = t->u.videotext.video_points;
-				video_x = t->u.videotext.x;
-				video_y = t->u.videotext.y;
-			}
-
-			if (t->hdr.tag == ATAG_MEM)
-			{
-				page_size = PAGE_SIZE;
-				nr_pages += (t->u.mem.size / PAGE_SIZE);
-			}
-		}
-	}
-	else
-	{
-		nr_pages = params->nr_pages;
-		page_size = params->page_size;
-		video_num_rows = params->video_num_rows;
-		video_num_cols = params->video_num_cols;
-		video_x = params->video_x;
-		video_y = params->video_y;
-		bytes_per_char_h = params->bytes_per_char_h;
-		bytes_per_char_v = params->bytes_per_char_v;
-	}
-
-	video_size_row = video_num_cols * bytes_per_char_h;
-	
-	if (bytes_per_char_h == 4)
-		for (i = 0; i < 256; i++)
-			con_charconvtable[i] =
-				(i & 128 ? 1 << 0  : 0) |
-				(i & 64  ? 1 << 4  : 0) |
-				(i & 32  ? 1 << 8  : 0) |
-				(i & 16  ? 1 << 12 : 0) |
-				(i & 8   ? 1 << 16 : 0) |
-				(i & 4   ? 1 << 20 : 0) |
-				(i & 2   ? 1 << 24 : 0) |
-				(i & 1   ? 1 << 28 : 0);
-	else
-		for (i = 0; i < 16; i++)
-			con_charconvtable[i] =
-				(i & 8   ? 1 << 0  : 0) |
-				(i & 4   ? 1 << 8  : 0) |
-				(i & 2   ? 1 << 16 : 0) |
-				(i & 1   ? 1 << 24 : 0);
-
-
-	palette_setpixel(0);
-	if (bytes_per_char_h == 1) {
-		palette_write (0);
-		palette_write (0x00ffffff);
-		for (i = 2; i < 256; i++)
-			palette_write (0);
-		white = 1;
-	} else {
-		for (i = 0; i < 256; i++)
-			palette_write (i < 16 ? palette_4[i] : 0);
-		white = 7;
-	}
-
-	if (nr_pages * page_size < 4096*1024) error("<4M of mem\n");
-}
-#endif
-
-/*
- * nothing to do
- */
-#define arch_decomp_wdog()
diff --git a/include/asm-arm/arch-rpc/vmalloc.h b/include/asm-arm/arch-rpc/vmalloc.h
deleted file mode 100644
index 077046bb2f36..000000000000
--- a/include/asm-arm/arch-rpc/vmalloc.h
+++ /dev/null
@@ -1,10 +0,0 @@
-/*
- *  linux/include/asm-arm/arch-rpc/vmalloc.h
- *
- *  Copyright (C) 1997 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#define VMALLOC_END       (PAGE_OFFSET + 0x1c000000)
diff --git a/include/asm-arm/arch-s3c2400/map.h b/include/asm-arm/arch-s3c2400/map.h
deleted file mode 100644
index 1184d907b31e..000000000000
--- a/include/asm-arm/arch-s3c2400/map.h
+++ /dev/null
@@ -1,66 +0,0 @@
-/* linux/include/asm-arm/arch-s3c2400/map.h
- *
- * Copyright 2003,2007  Simtec Electronics
- *	http://armlinux.simtec.co.uk/
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * Copyright 2003, Lucas Correia Villa Real
- *
- * S3C2400 - Memory map definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#define S3C2400_PA_MEMCTRL	(0x14000000)
-#define S3C2400_PA_USBHOST	(0x14200000)
-#define S3C2400_PA_IRQ		(0x14400000)
-#define S3C2400_PA_DMA		(0x14600000)
-#define S3C2400_PA_CLKPWR	(0x14800000)
-#define S3C2400_PA_LCD		(0x14A00000)
-#define S3C2400_PA_UART		(0x15000000)
-#define S3C2400_PA_TIMER	(0x15100000)
-#define S3C2400_PA_USBDEV	(0x15200140)
-#define S3C2400_PA_WATCHDOG	(0x15300000)
-#define S3C2400_PA_IIC		(0x15400000)
-#define S3C2400_PA_IIS		(0x15508000)
-#define S3C2400_PA_GPIO		(0x15600000)
-#define S3C2400_PA_RTC		(0x15700040)
-#define S3C2400_PA_ADC		(0x15800000)
-#define S3C2400_PA_SPI		(0x15900000)
-
-#define S3C2400_PA_MMC		(0x15A00000)
-#define S3C2400_SZ_MMC		SZ_1M
-
-/* physical addresses of all the chip-select areas */
-
-#define S3C2400_CS0	(0x00000000)
-#define S3C2400_CS1	(0x02000000)
-#define S3C2400_CS2	(0x04000000)
-#define S3C2400_CS3	(0x06000000)
-#define S3C2400_CS4	(0x08000000)
-#define S3C2400_CS5	(0x0A000000)
-#define S3C2400_CS6	(0x0C000000)
-#define S3C2400_CS7	(0x0E000000)
-
-#define S3C2400_SDRAM_PA    (S3C2400_CS6)
-
-/* Use a single interface for common resources between S3C24XX cpus */
-
-#define S3C24XX_PA_IRQ		S3C2400_PA_IRQ
-#define S3C24XX_PA_MEMCTRL	S3C2400_PA_MEMCTRL
-#define S3C24XX_PA_USBHOST	S3C2400_PA_USBHOST
-#define S3C24XX_PA_DMA		S3C2400_PA_DMA
-#define S3C24XX_PA_CLKPWR	S3C2400_PA_CLKPWR
-#define S3C24XX_PA_LCD		S3C2400_PA_LCD
-#define S3C24XX_PA_UART		S3C2400_PA_UART
-#define S3C24XX_PA_TIMER	S3C2400_PA_TIMER
-#define S3C24XX_PA_USBDEV	S3C2400_PA_USBDEV
-#define S3C24XX_PA_WATCHDOG	S3C2400_PA_WATCHDOG
-#define S3C24XX_PA_IIC		S3C2400_PA_IIC
-#define S3C24XX_PA_IIS		S3C2400_PA_IIS
-#define S3C24XX_PA_GPIO		S3C2400_PA_GPIO
-#define S3C24XX_PA_RTC		S3C2400_PA_RTC
-#define S3C24XX_PA_ADC		S3C2400_PA_ADC
-#define S3C24XX_PA_SPI		S3C2400_PA_SPI
diff --git a/include/asm-arm/arch-s3c2400/memory.h b/include/asm-arm/arch-s3c2400/memory.h
deleted file mode 100644
index fb0381dde704..000000000000
--- a/include/asm-arm/arch-s3c2400/memory.h
+++ /dev/null
@@ -1,23 +0,0 @@
-/* linux/include/asm-arm/arch-s3c2400/memory.h
- *  from linux/include/asm-arm/arch-rpc/memory.h
- *
- *  Copyright 2007 Simtec Electronics
- *	http://armlinux.simtec.co.uk/
- *	Ben Dooks <ben@simtec.co.uk>
- *
- *  Copyright (C) 1996,1997,1998 Russell King.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_MEMORY_H
-#define __ASM_ARCH_MEMORY_H
-
-#define PHYS_OFFSET	UL(0x0C000000)
-
-#define __virt_to_bus(x) __virt_to_phys(x)
-#define __bus_to_virt(x) __phys_to_virt(x)
-
-#endif
diff --git a/include/asm-arm/arch-s3c2410/debug-macro.S b/include/asm-arm/arch-s3c2410/debug-macro.S
deleted file mode 100644
index 89076c322726..000000000000
--- a/include/asm-arm/arch-s3c2410/debug-macro.S
+++ /dev/null
@@ -1,102 +0,0 @@
-/* linux/include/asm-arm/arch-s3c2410/debug-macro.S
- *
- * Debugging macro include header
- *
- *  Copyright (C) 1994-1999 Russell King
- *  Copyright (C) 2005 Simtec Electronics
- *
- *  Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <asm/arch/map.h>
-#include <asm/arch/regs-gpio.h>
-#include <asm/plat-s3c/regs-serial.h>
-
-#define S3C2410_UART1_OFF (0x4000)
-#define SHIFT_2440TXF (14-9)
-
-	.macro addruart, rx
-		mrc	p15, 0, \rx, c1, c0
-		tst	\rx, #1
-		ldreq	\rx, = S3C24XX_PA_UART
-		ldrne	\rx, = S3C24XX_VA_UART
-#if CONFIG_DEBUG_S3C_UART != 0
-		add	\rx, \rx, #(S3C2410_UART1_OFF * CONFIG_DEBUG_S3C_UART)
-#endif
-	.endm
-
-	.macro fifo_full_s3c24xx rd, rx
-		@ check for arm920 vs arm926. currently assume all arm926
-		@ devices have an 64 byte FIFO identical to the s3c2440
-		mrc	p15, 0, \rd, c0, c0
-		and	\rd, \rd, #0xff0
-		teq	\rd, #0x260
-		beq	1004f
-		mrc	p15, 0, \rd, c1, c0
-		tst	\rd, #1
-		addeq	\rd, \rx, #(S3C24XX_PA_GPIO - S3C24XX_PA_UART)
-		addne	\rd, \rx, #(S3C24XX_VA_GPIO - S3C24XX_VA_UART)
-		bic	\rd, \rd, #0xff000
-		ldr	\rd, [ \rd, # S3C2410_GSTATUS1 - S3C2410_GPIOREG(0) ]
-		and	\rd, \rd, #0x00ff0000
-		teq	\rd, #0x00440000		@ is it 2440?
-1004:
-		ldr	\rd, [ \rx, # S3C2410_UFSTAT ]
-		moveq	\rd, \rd, lsr #SHIFT_2440TXF
-		tst	\rd, #S3C2410_UFSTAT_TXFULL
-	.endm
-
-	.macro  fifo_full_s3c2410 rd, rx
-		ldr	\rd, [ \rx, # S3C2410_UFSTAT ]
-		tst	\rd, #S3C2410_UFSTAT_TXFULL
-	.endm
-
-/* fifo level reading */
-
-	.macro fifo_level_s3c24xx rd, rx
-		@ check for arm920 vs arm926. currently assume all arm926
-		@ devices have an 64 byte FIFO identical to the s3c2440
-		mrc	p15, 0, \rd, c0, c0
-		and	\rd, \rd, #0xff0
-		teq	\rd, #0x260
-		beq	10000f
-		mrc	p15, 0, \rd, c1, c0
-		tst	\rd, #1
-		addeq	\rd, \rx, #(S3C24XX_PA_GPIO - S3C24XX_PA_UART)
-		addne	\rd, \rx, #(S3C24XX_VA_GPIO - S3C24XX_VA_UART)
-		bic	\rd, \rd, #0xff000
-		ldr	\rd, [ \rd, # S3C2410_GSTATUS1 - S3C2410_GPIOREG(0) ]
-		and	\rd, \rd, #0x00ff0000
-		teq	\rd, #0x00440000		@ is it 2440?
-
-10000:
-		ldr	\rd, [ \rx, # S3C2410_UFSTAT ]
-		andne	\rd, \rd, #S3C2410_UFSTAT_TXMASK
-		andeq	\rd, \rd, #S3C2440_UFSTAT_TXMASK
-	.endm
-
-	.macro fifo_level_s3c2410 rd, rx
-		ldr	\rd, [ \rx, # S3C2410_UFSTAT ]
-		and	\rd, \rd, #S3C2410_UFSTAT_TXMASK
-	.endm
-
-/* Select the correct implementation depending on the configuration. The
- * S3C2440 will get selected by default, as these are the most widely
- * used variants of these
-*/
-
-#if defined(CONFIG_CPU_LLSERIAL_S3C2410_ONLY)
-#define fifo_full  fifo_full_s3c2410
-#define fifo_level fifo_level_s3c2410
-#elif !defined(CONFIG_CPU_LLSERIAL_S3C2440_ONLY)
-#define fifo_full  fifo_full_s3c24xx
-#define fifo_level fifo_level_s3c24xx
-#endif
-
-/* include the reset of the code which will do the work */
-
-#include <asm/plat-s3c/debug-macro.S>
diff --git a/include/asm-arm/arch-s3c2410/dma.h b/include/asm-arm/arch-s3c2410/dma.h
deleted file mode 100644
index 4f291d9b7d93..000000000000
--- a/include/asm-arm/arch-s3c2410/dma.h
+++ /dev/null
@@ -1,453 +0,0 @@
-/* linux/include/asm-arm/arch-s3c2410/dma.h
- *
- * Copyright (C) 2003,2004,2006 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * Samsung S3C241XX DMA support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_DMA_H
-#define __ASM_ARCH_DMA_H __FILE__
-
-#include <linux/sysdev.h>
-#include <asm/hardware.h>
-
-/*
- * This is the maximum DMA address(physical address) that can be DMAd to.
- *
- */
-#define MAX_DMA_ADDRESS		0x40000000
-#define MAX_DMA_TRANSFER_SIZE   0x100000 /* Data Unit is half word  */
-
-/* We use `virtual` dma channels to hide the fact we have only a limited
- * number of DMA channels, and not of all of them (dependant on the device)
- * can be attached to any DMA source. We therefore let the DMA core handle
- * the allocation of hardware channels to clients.
-*/
-
-enum dma_ch {
-	DMACH_XD0,
-	DMACH_XD1,
-	DMACH_SDI,
-	DMACH_SPI0,
-	DMACH_SPI1,
-	DMACH_UART0,
-	DMACH_UART1,
-	DMACH_UART2,
-	DMACH_TIMER,
-	DMACH_I2S_IN,
-	DMACH_I2S_OUT,
-	DMACH_PCM_IN,
-	DMACH_PCM_OUT,
-	DMACH_MIC_IN,
-	DMACH_USB_EP1,
-	DMACH_USB_EP2,
-	DMACH_USB_EP3,
-	DMACH_USB_EP4,
-	DMACH_UART0_SRC2,	/* s3c2412 second uart sources */
-	DMACH_UART1_SRC2,
-	DMACH_UART2_SRC2,
-	DMACH_UART3,		/* s3c2443 has extra uart */
-	DMACH_UART3_SRC2,
-	DMACH_MAX,		/* the end entry */
-};
-
-#define DMACH_LOW_LEVEL	(1<<28)	/* use this to specifiy hardware ch no */
-
-/* we have 4 dma channels */
-#ifndef CONFIG_CPU_S3C2443
-#define S3C2410_DMA_CHANNELS		(4)
-#else
-#define S3C2410_DMA_CHANNELS		(6)
-#endif
-
-/* types */
-
-enum s3c2410_dma_state {
-	S3C2410_DMA_IDLE,
-	S3C2410_DMA_RUNNING,
-	S3C2410_DMA_PAUSED
-};
-
-
-/* enum s3c2410_dma_loadst
- *
- * This represents the state of the DMA engine, wrt to the loaded / running
- * transfers. Since we don't have any way of knowing exactly the state of
- * the DMA transfers, we need to know the state to make decisions on wether
- * we can
- *
- * S3C2410_DMA_NONE
- *
- * There are no buffers loaded (the channel should be inactive)
- *
- * S3C2410_DMA_1LOADED
- *
- * There is one buffer loaded, however it has not been confirmed to be
- * loaded by the DMA engine. This may be because the channel is not
- * yet running, or the DMA driver decided that it was too costly to
- * sit and wait for it to happen.
- *
- * S3C2410_DMA_1RUNNING
- *
- * The buffer has been confirmed running, and not finisged
- *
- * S3C2410_DMA_1LOADED_1RUNNING
- *
- * There is a buffer waiting to be loaded by the DMA engine, and one
- * currently running.
-*/
-
-enum s3c2410_dma_loadst {
-	S3C2410_DMALOAD_NONE,
-	S3C2410_DMALOAD_1LOADED,
-	S3C2410_DMALOAD_1RUNNING,
-	S3C2410_DMALOAD_1LOADED_1RUNNING,
-};
-
-enum s3c2410_dma_buffresult {
-	S3C2410_RES_OK,
-	S3C2410_RES_ERR,
-	S3C2410_RES_ABORT
-};
-
-enum s3c2410_dmasrc {
-	S3C2410_DMASRC_HW,		/* source is memory */
-	S3C2410_DMASRC_MEM		/* source is hardware */
-};
-
-/* enum s3c2410_chan_op
- *
- * operation codes passed to the DMA code by the user, and also used
- * to inform the current channel owner of any changes to the system state
-*/
-
-enum s3c2410_chan_op {
-	S3C2410_DMAOP_START,
-	S3C2410_DMAOP_STOP,
-	S3C2410_DMAOP_PAUSE,
-	S3C2410_DMAOP_RESUME,
-	S3C2410_DMAOP_FLUSH,
-	S3C2410_DMAOP_TIMEOUT,		/* internal signal to handler */
-	S3C2410_DMAOP_STARTED,		/* indicate channel started */
-};
-
-/* flags */
-
-#define S3C2410_DMAF_SLOW         (1<<0)   /* slow, so don't worry about
-					    * waiting for reloads */
-#define S3C2410_DMAF_AUTOSTART    (1<<1)   /* auto-start if buffer queued */
-
-/* dma buffer */
-
-struct s3c2410_dma_client {
-	char                *name;
-};
-
-/* s3c2410_dma_buf_s
- *
- * internally used buffer structure to describe a queued or running
- * buffer.
-*/
-
-struct s3c2410_dma_buf;
-struct s3c2410_dma_buf {
-	struct s3c2410_dma_buf	*next;
-	int			 magic;		/* magic */
-	int			 size;		/* buffer size in bytes */
-	dma_addr_t		 data;		/* start of DMA data */
-	dma_addr_t		 ptr;		/* where the DMA got to [1] */
-	void			*id;		/* client's id */
-};
-
-/* [1] is this updated for both recv/send modes? */
-
-struct s3c2410_dma_chan;
-
-/* s3c2410_dma_cbfn_t
- *
- * buffer callback routine type
-*/
-
-typedef void (*s3c2410_dma_cbfn_t)(struct s3c2410_dma_chan *,
-				   void *buf, int size,
-				   enum s3c2410_dma_buffresult result);
-
-typedef int  (*s3c2410_dma_opfn_t)(struct s3c2410_dma_chan *,
-				   enum s3c2410_chan_op );
-
-struct s3c2410_dma_stats {
-	unsigned long		loads;
-	unsigned long		timeout_longest;
-	unsigned long		timeout_shortest;
-	unsigned long		timeout_avg;
-	unsigned long		timeout_failed;
-};
-
-struct s3c2410_dma_map;
-
-/* struct s3c2410_dma_chan
- *
- * full state information for each DMA channel
-*/
-
-struct s3c2410_dma_chan {
-	/* channel state flags and information */
-	unsigned char		 number;      /* number of this dma channel */
-	unsigned char		 in_use;      /* channel allocated */
-	unsigned char		 irq_claimed; /* irq claimed for channel */
-	unsigned char		 irq_enabled; /* irq enabled for channel */
-	unsigned char		 xfer_unit;   /* size of an transfer */
-
-	/* channel state */
-
-	enum s3c2410_dma_state	 state;
-	enum s3c2410_dma_loadst	 load_state;
-	struct s3c2410_dma_client *client;
-
-	/* channel configuration */
-	enum s3c2410_dmasrc	 source;
-	unsigned long		 dev_addr;
-	unsigned long		 load_timeout;
-	unsigned int		 flags;		/* channel flags */
-	unsigned int		 hw_cfg;	/* last hw config */
-
-	struct s3c24xx_dma_map	*map;		/* channel hw maps */
-
-	/* channel's hardware position and configuration */
-	void __iomem		*regs;		/* channels registers */
-	void __iomem		*addr_reg;	/* data address register */
-	unsigned int		 irq;		/* channel irq */
-	unsigned long		 dcon;		/* default value of DCON */
-
-	/* driver handles */
-	s3c2410_dma_cbfn_t	 callback_fn;	/* buffer done callback */
-	s3c2410_dma_opfn_t	 op_fn;		/* channel op callback */
-
-	/* stats gathering */
-	struct s3c2410_dma_stats *stats;
-	struct s3c2410_dma_stats  stats_store;
-
-	/* buffer list and information */
-	struct s3c2410_dma_buf	*curr;		/* current dma buffer */
-	struct s3c2410_dma_buf	*next;		/* next buffer to load */
-	struct s3c2410_dma_buf	*end;		/* end of queue */
-
-	/* system device */
-	struct sys_device	dev;
-};
-
-/* the currently allocated channel information */
-extern struct s3c2410_dma_chan s3c2410_chans[];
-
-/* note, we don't really use dma_device_t at the moment */
-typedef unsigned long dma_device_t;
-
-/* functions --------------------------------------------------------------- */
-
-/* s3c2410_dma_request
- *
- * request a dma channel exclusivley
-*/
-
-extern int s3c2410_dma_request(dmach_t channel,
-			       struct s3c2410_dma_client *, void *dev);
-
-
-/* s3c2410_dma_ctrl
- *
- * change the state of the dma channel
-*/
-
-extern int s3c2410_dma_ctrl(dmach_t channel, enum s3c2410_chan_op op);
-
-/* s3c2410_dma_setflags
- *
- * set the channel's flags to a given state
-*/
-
-extern int s3c2410_dma_setflags(dmach_t channel,
-				unsigned int flags);
-
-/* s3c2410_dma_free
- *
- * free the dma channel (will also abort any outstanding operations)
-*/
-
-extern int s3c2410_dma_free(dmach_t channel, struct s3c2410_dma_client *);
-
-/* s3c2410_dma_enqueue
- *
- * place the given buffer onto the queue of operations for the channel.
- * The buffer must be allocated from dma coherent memory, or the Dcache/WB
- * drained before the buffer is given to the DMA system.
-*/
-
-extern int s3c2410_dma_enqueue(dmach_t channel, void *id,
-			       dma_addr_t data, int size);
-
-/* s3c2410_dma_config
- *
- * configure the dma channel
-*/
-
-extern int s3c2410_dma_config(dmach_t channel, int xferunit, int dcon);
-
-/* s3c2410_dma_devconfig
- *
- * configure the device we're talking to
-*/
-
-extern int s3c2410_dma_devconfig(int channel, enum s3c2410_dmasrc source,
-				 int hwcfg, unsigned long devaddr);
-
-/* s3c2410_dma_getposition
- *
- * get the position that the dma transfer is currently at
-*/
-
-extern int s3c2410_dma_getposition(dmach_t channel,
-				   dma_addr_t *src, dma_addr_t *dest);
-
-extern int s3c2410_dma_set_opfn(dmach_t, s3c2410_dma_opfn_t rtn);
-extern int s3c2410_dma_set_buffdone_fn(dmach_t, s3c2410_dma_cbfn_t rtn);
-
-/* DMA Register definitions */
-
-#define S3C2410_DMA_DISRC       (0x00)
-#define S3C2410_DMA_DISRCC      (0x04)
-#define S3C2410_DMA_DIDST       (0x08)
-#define S3C2410_DMA_DIDSTC      (0x0C)
-#define S3C2410_DMA_DCON        (0x10)
-#define S3C2410_DMA_DSTAT       (0x14)
-#define S3C2410_DMA_DCSRC       (0x18)
-#define S3C2410_DMA_DCDST       (0x1C)
-#define S3C2410_DMA_DMASKTRIG   (0x20)
-#define S3C2412_DMA_DMAREQSEL	(0x24)
-#define S3C2443_DMA_DMAREQSEL	(0x24)
-
-#define S3C2410_DISRCC_INC	(1<<0)
-#define S3C2410_DISRCC_APB	(1<<1)
-
-#define S3C2410_DMASKTRIG_STOP   (1<<2)
-#define S3C2410_DMASKTRIG_ON     (1<<1)
-#define S3C2410_DMASKTRIG_SWTRIG (1<<0)
-
-#define S3C2410_DCON_DEMAND     (0<<31)
-#define S3C2410_DCON_HANDSHAKE  (1<<31)
-#define S3C2410_DCON_SYNC_PCLK  (0<<30)
-#define S3C2410_DCON_SYNC_HCLK  (1<<30)
-
-#define S3C2410_DCON_INTREQ     (1<<29)
-
-#define S3C2410_DCON_CH0_XDREQ0	(0<<24)
-#define S3C2410_DCON_CH0_UART0	(1<<24)
-#define S3C2410_DCON_CH0_SDI	(2<<24)
-#define S3C2410_DCON_CH0_TIMER	(3<<24)
-#define S3C2410_DCON_CH0_USBEP1	(4<<24)
-
-#define S3C2410_DCON_CH1_XDREQ1	(0<<24)
-#define S3C2410_DCON_CH1_UART1	(1<<24)
-#define S3C2410_DCON_CH1_I2SSDI	(2<<24)
-#define S3C2410_DCON_CH1_SPI	(3<<24)
-#define S3C2410_DCON_CH1_USBEP2	(4<<24)
-
-#define S3C2410_DCON_CH2_I2SSDO	(0<<24)
-#define S3C2410_DCON_CH2_I2SSDI	(1<<24)
-#define S3C2410_DCON_CH2_SDI	(2<<24)
-#define S3C2410_DCON_CH2_TIMER	(3<<24)
-#define S3C2410_DCON_CH2_USBEP3	(4<<24)
-
-#define S3C2410_DCON_CH3_UART2	(0<<24)
-#define S3C2410_DCON_CH3_SDI	(1<<24)
-#define S3C2410_DCON_CH3_SPI	(2<<24)
-#define S3C2410_DCON_CH3_TIMER	(3<<24)
-#define S3C2410_DCON_CH3_USBEP4	(4<<24)
-
-#define S3C2410_DCON_SRCSHIFT   (24)
-#define S3C2410_DCON_SRCMASK	(7<<24)
-
-#define S3C2410_DCON_BYTE       (0<<20)
-#define S3C2410_DCON_HALFWORD   (1<<20)
-#define S3C2410_DCON_WORD       (2<<20)
-
-#define S3C2410_DCON_AUTORELOAD (0<<22)
-#define S3C2410_DCON_NORELOAD   (1<<22)
-#define S3C2410_DCON_HWTRIG     (1<<23)
-
-#ifdef CONFIG_CPU_S3C2440
-#define S3C2440_DIDSTC_CHKINT	(1<<2)
-
-#define S3C2440_DCON_CH0_I2SSDO	(5<<24)
-#define S3C2440_DCON_CH0_PCMIN	(6<<24)
-
-#define S3C2440_DCON_CH1_PCMOUT	(5<<24)
-#define S3C2440_DCON_CH1_SDI	(6<<24)
-
-#define S3C2440_DCON_CH2_PCMIN	(5<<24)
-#define S3C2440_DCON_CH2_MICIN	(6<<24)
-
-#define S3C2440_DCON_CH3_MICIN	(5<<24)
-#define S3C2440_DCON_CH3_PCMOUT	(6<<24)
-#endif
-
-#ifdef CONFIG_CPU_S3C2412
-
-#define S3C2412_DMAREQSEL_SRC(x)	((x)<<1)
-
-#define S3C2412_DMAREQSEL_HW		(1)
-
-#define S3C2412_DMAREQSEL_SPI0TX	S3C2412_DMAREQSEL_SRC(0)
-#define S3C2412_DMAREQSEL_SPI0RX	S3C2412_DMAREQSEL_SRC(1)
-#define S3C2412_DMAREQSEL_SPI1TX	S3C2412_DMAREQSEL_SRC(2)
-#define S3C2412_DMAREQSEL_SPI1RX	S3C2412_DMAREQSEL_SRC(3)
-#define S3C2412_DMAREQSEL_I2STX		S3C2412_DMAREQSEL_SRC(4)
-#define S3C2412_DMAREQSEL_I2SRX		S3C2412_DMAREQSEL_SRC(5)
-#define S3C2412_DMAREQSEL_TIMER		S3C2412_DMAREQSEL_SRC(9)
-#define S3C2412_DMAREQSEL_SDI		S3C2412_DMAREQSEL_SRC(10)
-#define S3C2412_DMAREQSEL_USBEP1	S3C2412_DMAREQSEL_SRC(13)
-#define S3C2412_DMAREQSEL_USBEP2	S3C2412_DMAREQSEL_SRC(14)
-#define S3C2412_DMAREQSEL_USBEP3	S3C2412_DMAREQSEL_SRC(15)
-#define S3C2412_DMAREQSEL_USBEP4	S3C2412_DMAREQSEL_SRC(16)
-#define S3C2412_DMAREQSEL_XDREQ0	S3C2412_DMAREQSEL_SRC(17)
-#define S3C2412_DMAREQSEL_XDREQ1	S3C2412_DMAREQSEL_SRC(18)
-#define S3C2412_DMAREQSEL_UART0_0	S3C2412_DMAREQSEL_SRC(19)
-#define S3C2412_DMAREQSEL_UART0_1	S3C2412_DMAREQSEL_SRC(20)
-#define S3C2412_DMAREQSEL_UART1_0	S3C2412_DMAREQSEL_SRC(21)
-#define S3C2412_DMAREQSEL_UART1_1	S3C2412_DMAREQSEL_SRC(22)
-#define S3C2412_DMAREQSEL_UART2_0	S3C2412_DMAREQSEL_SRC(23)
-#define S3C2412_DMAREQSEL_UART2_1	S3C2412_DMAREQSEL_SRC(24)
-
-#endif
-
-#define S3C2443_DMAREQSEL_SRC(x)	((x)<<1)
-
-#define S3C2443_DMAREQSEL_HW		(1)
-
-#define S3C2443_DMAREQSEL_SPI0TX	S3C2443_DMAREQSEL_SRC(0)
-#define S3C2443_DMAREQSEL_SPI0RX	S3C2443_DMAREQSEL_SRC(1)
-#define S3C2443_DMAREQSEL_SPI1TX	S3C2443_DMAREQSEL_SRC(2)
-#define S3C2443_DMAREQSEL_SPI1RX	S3C2443_DMAREQSEL_SRC(3)
-#define S3C2443_DMAREQSEL_I2STX		S3C2443_DMAREQSEL_SRC(4)
-#define S3C2443_DMAREQSEL_I2SRX		S3C2443_DMAREQSEL_SRC(5)
-#define S3C2443_DMAREQSEL_TIMER		S3C2443_DMAREQSEL_SRC(9)
-#define S3C2443_DMAREQSEL_SDI		S3C2443_DMAREQSEL_SRC(10)
-#define S3C2443_DMAREQSEL_XDREQ0	S3C2443_DMAREQSEL_SRC(17)
-#define S3C2443_DMAREQSEL_XDREQ1	S3C2443_DMAREQSEL_SRC(18)
-#define S3C2443_DMAREQSEL_UART0_0	S3C2443_DMAREQSEL_SRC(19)
-#define S3C2443_DMAREQSEL_UART0_1	S3C2443_DMAREQSEL_SRC(20)
-#define S3C2443_DMAREQSEL_UART1_0	S3C2443_DMAREQSEL_SRC(21)
-#define S3C2443_DMAREQSEL_UART1_1	S3C2443_DMAREQSEL_SRC(22)
-#define S3C2443_DMAREQSEL_UART2_0	S3C2443_DMAREQSEL_SRC(23)
-#define S3C2443_DMAREQSEL_UART2_1	S3C2443_DMAREQSEL_SRC(24)
-#define S3C2443_DMAREQSEL_UART3_0	S3C2443_DMAREQSEL_SRC(25)
-#define S3C2443_DMAREQSEL_UART3_1	S3C2443_DMAREQSEL_SRC(26)
-#define S3C2443_DMAREQSEL_PCMOUT	S3C2443_DMAREQSEL_SRC(27)
-#define S3C2443_DMAREQSEL_PCMIN 	S3C2443_DMAREQSEL_SRC(28)
-#define S3C2443_DMAREQSEL_MICIN		S3C2443_DMAREQSEL_SRC(29)
-
-#endif /* __ASM_ARCH_DMA_H */
diff --git a/include/asm-arm/arch-s3c2410/entry-macro.S b/include/asm-arm/arch-s3c2410/entry-macro.S
deleted file mode 100644
index bbec0a8ff158..000000000000
--- a/include/asm-arm/arch-s3c2410/entry-macro.S
+++ /dev/null
@@ -1,78 +0,0 @@
-/*
- * include/asm-arm/arch-s3c2410/entry-macro.S
- *
- * Low-level IRQ helper macros for S3C2410-based platforms
- *
- * This file is licensed under  the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
-*/
-
-/* We have a problem that the INTOFFSET register does not always
- * show one interrupt. Occasionally we get two interrupts through
- * the prioritiser, and this causes the INTOFFSET register to show
- * what looks like the logical-or of the two interrupt numbers.
- *
- * Thanks to Klaus, Shannon, et al for helping to debug this problem
-*/
-
-#define INTPND		(0x10)
-#define INTOFFSET	(0x14)
-
-#include <asm/hardware.h>
-#include <asm/irq.h>
-
-	.macro  get_irqnr_preamble, base, tmp
-	.endm
-
-	.macro  arch_ret_to_user, tmp1, tmp2
-	.endm
-
-	.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
-
-		mov	\base, #S3C24XX_VA_IRQ
-
-		@@ try the interrupt offset register, since it is there
-
-		ldr	\irqstat, [ \base, #INTPND ]
-		teq	\irqstat, #0
-		beq	1002f
-		ldr	\irqnr, [ \base, #INTOFFSET ]
-		mov	\tmp, #1
-		tst	\irqstat, \tmp, lsl \irqnr
-		bne	1001f
-
-		@@ the number specified is not a valid irq, so try
-		@@ and work it out for ourselves
-
-		mov	\irqnr, #0		@@ start here
-
-		@@ work out which irq (if any) we got
-
-		movs	\tmp, \irqstat, lsl#16
-		addeq	\irqnr, \irqnr, #16
-		moveq	\irqstat, \irqstat, lsr#16
-		tst	\irqstat, #0xff
-		addeq	\irqnr, \irqnr, #8
-		moveq	\irqstat, \irqstat, lsr#8
-		tst	\irqstat, #0xf
-		addeq	\irqnr, \irqnr, #4
-		moveq	\irqstat, \irqstat, lsr#4
-		tst	\irqstat, #0x3
-		addeq	\irqnr, \irqnr, #2
-		moveq	\irqstat, \irqstat, lsr#2
-		tst	\irqstat, #0x1
-		addeq	\irqnr, \irqnr, #1
-
-		@@ we have the value
-1001:
-		adds	\irqnr, \irqnr, #IRQ_EINT0
-1002:
-		@@ exit here, Z flag unset if IRQ
-
-	.endm
-
-		/* currently don't need an disable_fiq macro */
-
-		.macro	disable_fiq
-		.endm
diff --git a/include/asm-arm/arch-s3c2410/fb.h b/include/asm-arm/arch-s3c2410/fb.h
deleted file mode 100644
index 5d0262601a7e..000000000000
--- a/include/asm-arm/arch-s3c2410/fb.h
+++ /dev/null
@@ -1,74 +0,0 @@
-/* linux/include/asm-arm/arch-s3c2410/fb.h
- *
- * Copyright (c) 2004 Arnaud Patard <arnaud.patard@rtp-net.org>
- *
- * Inspired by pxafb.h
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARM_FB_H
-#define __ASM_ARM_FB_H
-
-#include <asm/arch/regs-lcd.h>
-
-struct s3c2410fb_hw {
-	unsigned long	lcdcon1;
-	unsigned long	lcdcon2;
-	unsigned long	lcdcon3;
-	unsigned long	lcdcon4;
-	unsigned long	lcdcon5;
-};
-
-/* LCD description */
-struct s3c2410fb_display {
-	/* LCD type */
-	unsigned type;
-
-	/* Screen size */
-	unsigned short width;
-	unsigned short height;
-
-	/* Screen info */
-	unsigned short xres;
-	unsigned short yres;
-	unsigned short bpp;
-
-	unsigned pixclock;		/* pixclock in picoseconds */
-	unsigned short left_margin;  /* value in pixels (TFT) or HCLKs (STN) */
-	unsigned short right_margin; /* value in pixels (TFT) or HCLKs (STN) */
-	unsigned short hsync_len;    /* value in pixels (TFT) or HCLKs (STN) */
-	unsigned short upper_margin;	/* value in lines (TFT) or 0 (STN) */
-	unsigned short lower_margin;	/* value in lines (TFT) or 0 (STN) */
-	unsigned short vsync_len;	/* value in lines (TFT) or 0 (STN) */
-
-	/* lcd configuration registers */
-	unsigned long	lcdcon5;
-};
-
-struct s3c2410fb_mach_info {
-
-	struct s3c2410fb_display *displays;	/* attached diplays info */
-	unsigned num_displays;			/* number of defined displays */
-	unsigned default_display;
-
-	/* GPIOs */
-
-	unsigned long	gpcup;
-	unsigned long	gpcup_mask;
-	unsigned long	gpccon;
-	unsigned long	gpccon_mask;
-	unsigned long	gpdup;
-	unsigned long	gpdup_mask;
-	unsigned long	gpdcon;
-	unsigned long	gpdcon_mask;
-
-	/* lpc3600 control register */
-	unsigned long	lpcsel;
-};
-
-extern void __init s3c24xx_fb_set_platdata(struct s3c2410fb_mach_info *);
-
-#endif /* __ASM_ARM_FB_H */
diff --git a/include/asm-arm/arch-s3c2410/gpio.h b/include/asm-arm/arch-s3c2410/gpio.h
deleted file mode 100644
index 18e10d2c35ea..000000000000
--- a/include/asm-arm/arch-s3c2410/gpio.h
+++ /dev/null
@@ -1,18 +0,0 @@
-/* linux/include/asm-arm/arch-s3c2410/gpio.h
- *
- * Copyright (c) 2008 Simtec Electronics
- *	http://armlinux.simtec.co.uk/
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * S3C2410 - GPIO lib support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#define gpio_get_value	__gpio_get_value
-#define gpio_set_value	__gpio_set_value
-#define gpio_cansleep	__gpio_cansleep
-
-#include <asm-generic/gpio.h>
diff --git a/include/asm-arm/arch-s3c2410/hardware.h b/include/asm-arm/arch-s3c2410/hardware.h
deleted file mode 100644
index 29592c3ebf22..000000000000
--- a/include/asm-arm/arch-s3c2410/hardware.h
+++ /dev/null
@@ -1,141 +0,0 @@
-/* linux/include/asm-arm/arch-s3c2410/hardware.h
- *
- * Copyright (c) 2003 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * S3C2410 - hardware
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_HARDWARE_H
-#define __ASM_ARCH_HARDWARE_H
-
-#ifndef __ASM_HARDWARE_H
-#error "Do not include this directly, instead #include <asm/hardware.h>"
-#endif
-
-#ifndef __ASSEMBLY__
-
-/* external functions for GPIO support
- *
- * These allow various different clients to access the same GPIO
- * registers without conflicting. If your driver only owns the entire
- * GPIO register, then it is safe to ioremap/__raw_{read|write} to it.
-*/
-
-/* s3c2410_gpio_cfgpin
- *
- * set the configuration of the given pin to the value passed.
- *
- * eg:
- *    s3c2410_gpio_cfgpin(S3C2410_GPA0, S3C2410_GPA0_ADDR0);
- *    s3c2410_gpio_cfgpin(S3C2410_GPE8, S3C2410_GPE8_SDDAT1);
-*/
-
-extern void s3c2410_gpio_cfgpin(unsigned int pin, unsigned int function);
-
-extern unsigned int s3c2410_gpio_getcfg(unsigned int pin);
-
-/* s3c2410_gpio_getirq
- *
- * turn the given pin number into the corresponding IRQ number
- *
- * returns:
- *	< 0 = no interrupt for this pin
- *	>=0 = interrupt number for the pin
-*/
-
-extern int s3c2410_gpio_getirq(unsigned int pin);
-
-/* s3c2410_gpio_irq2pin
- *
- * turn the given irq number into the corresponding GPIO number
- *
- * returns:
- *	< 0 = no pin
- *	>=0 = gpio pin number
-*/
-
-extern int s3c2410_gpio_irq2pin(unsigned int irq);
-
-#ifdef CONFIG_CPU_S3C2400
-
-extern int s3c2400_gpio_getirq(unsigned int pin);
-
-#endif /* CONFIG_CPU_S3C2400 */
-
-/* s3c2410_gpio_irqfilter
- *
- * set the irq filtering on the given pin
- *
- * on = 0 => disable filtering
- *      1 => enable filtering
- *
- * config = S3C2410_EINTFLT_PCLK or S3C2410_EINTFLT_EXTCLK orred with
- *          width of filter (0 through 63)
- *
- *
-*/
-
-extern int s3c2410_gpio_irqfilter(unsigned int pin, unsigned int on,
-				  unsigned int config);
-
-/* s3c2410_gpio_pullup
- *
- * configure the pull-up control on the given pin
- *
- * to = 1 => disable the pull-up
- *      0 => enable the pull-up
- *
- * eg;
- *
- *   s3c2410_gpio_pullup(S3C2410_GPB0, 0);
- *   s3c2410_gpio_pullup(S3C2410_GPE8, 0);
-*/
-
-extern void s3c2410_gpio_pullup(unsigned int pin, unsigned int to);
-
-/* s3c2410_gpio_getpull
- *
- * Read the state of the pull-up on a given pin
- *
- * return:
- *	< 0 => error code
- *	  0 => enabled
- *	  1 => disabled
-*/
-
-extern int s3c2410_gpio_getpull(unsigned int pin);
-
-extern void s3c2410_gpio_setpin(unsigned int pin, unsigned int to);
-
-extern unsigned int s3c2410_gpio_getpin(unsigned int pin);
-
-extern unsigned int s3c2410_modify_misccr(unsigned int clr, unsigned int chg);
-
-#ifdef CONFIG_CPU_S3C2440
-
-extern int s3c2440_set_dsc(unsigned int pin, unsigned int value);
-
-#endif /* CONFIG_CPU_S3C2440 */
-
-#ifdef CONFIG_CPU_S3C2412
-
-extern int s3c2412_gpio_set_sleepcfg(unsigned int pin, unsigned int state);
-
-#endif /* CONFIG_CPU_S3C2412 */
-
-#endif /* __ASSEMBLY__ */
-
-#include <asm/sizes.h>
-#include <asm/arch/map.h>
-
-/* machine specific hardware definitions should go after this */
-
-/* currently here until moved into config (todo) */
-#define CONFIG_NO_MULTIWORD_IO
-
-#endif /* __ASM_ARCH_HARDWARE_H */
diff --git a/include/asm-arm/arch-s3c2410/io.h b/include/asm-arm/arch-s3c2410/io.h
deleted file mode 100644
index 6b35a4f2630e..000000000000
--- a/include/asm-arm/arch-s3c2410/io.h
+++ /dev/null
@@ -1,218 +0,0 @@
-/*
- * linux/include/asm-arm/arch-s3c2410/io.h
- *  from linux/include/asm-arm/arch-rpc/io.h
- *
- * Copyright (C) 1997 Russell King
- *	     (C) 2003 Simtec Electronics
-*/
-
-#ifndef __ASM_ARM_ARCH_IO_H
-#define __ASM_ARM_ARCH_IO_H
-
-#include <asm/hardware.h>
-
-#define IO_SPACE_LIMIT 0xffffffff
-
-/*
- * We use two different types of addressing - PC style addresses, and ARM
- * addresses.  PC style accesses the PC hardware with the normal PC IO
- * addresses, eg 0x3f8 for serial#1.  ARM addresses are above A28
- * and are translated to the start of IO.  Note that all addresses are
- * not shifted left!
- */
-
-#define __PORT_PCIO(x)	((x) < (1<<28))
-
-#define PCIO_BASE	 (S3C24XX_VA_ISA_WORD)
-#define PCIO_BASE_b	 (S3C24XX_VA_ISA_BYTE)
-#define PCIO_BASE_w	 (S3C24XX_VA_ISA_WORD)
-#define PCIO_BASE_l	 (S3C24XX_VA_ISA_WORD)
-/*
- * Dynamic IO functions - let the compiler
- * optimize the expressions
- */
-
-#define DECLARE_DYN_OUT(sz,fnsuffix,instr) \
-static inline void __out##fnsuffix (unsigned int val, unsigned int port) \
-{ \
-	unsigned long temp;				      \
-	__asm__ __volatile__(				      \
-	"cmp	%2, #(1<<28)\n\t"			      \
-	"mov	%0, %2\n\t"				      \
-	"addcc	%0, %0, %3\n\t"				      \
-	"str" instr " %1, [%0, #0 ]	@ out" #fnsuffix      \
-	: "=&r" (temp)					      \
-	: "r" (val), "r" (port), "Ir" (PCIO_BASE_##fnsuffix)  \
-	: "cc");					      \
-}
-
-
-#define DECLARE_DYN_IN(sz,fnsuffix,instr)				\
-static inline unsigned sz __in##fnsuffix (unsigned int port)		\
-{									\
-	unsigned long temp, value;					\
-	__asm__ __volatile__(						\
-	"cmp	%2, #(1<<28)\n\t"					\
-	"mov	%0, %2\n\t"						\
-	"addcc	%0, %0, %3\n\t"						\
-	"ldr" instr "	%1, [%0, #0 ]	@ in" #fnsuffix		\
-	: "=&r" (temp), "=r" (value)					\
-	: "r" (port), "Ir" (PCIO_BASE_##fnsuffix)	\
-	: "cc");							\
-	return (unsigned sz)value;					\
-}
-
-static inline void __iomem *__ioaddr (unsigned long port)
-{
-	return __PORT_PCIO(port) ? (PCIO_BASE + port) : (void __iomem *)port;
-}
-
-#define DECLARE_IO(sz,fnsuffix,instr)	\
-	DECLARE_DYN_IN(sz,fnsuffix,instr) \
-	DECLARE_DYN_OUT(sz,fnsuffix,instr)
-
-DECLARE_IO(char,b,"b")
-DECLARE_IO(short,w,"h")
-DECLARE_IO(int,l,"")
-
-#undef DECLARE_IO
-#undef DECLARE_DYN_IN
-
-/*
- * Constant address IO functions
- *
- * These have to be macros for the 'J' constraint to work -
- * +/-4096 immediate operand.
- */
-#define __outbc(value,port)						\
-({									\
-	if (__PORT_PCIO((port)))					\
-		__asm__ __volatile__(					\
-		"strb	%0, [%1, %2]	@ outbc"			\
-		: : "r" (value), "r" (PCIO_BASE), "Jr" ((port)));	\
-	else								\
-		__asm__ __volatile__(					\
-		"strb	%0, [%1, #0]	@ outbc"			\
-		: : "r" (value), "r" ((port)));				\
-})
-
-#define __inbc(port)							\
-({									\
-	unsigned char result;						\
-	if (__PORT_PCIO((port)))					\
-		__asm__ __volatile__(					\
-		"ldrb	%0, [%1, %2]	@ inbc"				\
-		: "=r" (result) : "r" (PCIO_BASE), "Jr" ((port)));	\
-	else								\
-		__asm__ __volatile__(					\
-		"ldrb	%0, [%1, #0]	@ inbc"				\
-		: "=r" (result) : "r" ((port)));			\
-	result;								\
-})
-
-#define __outwc(value,port)						\
-({									\
-	unsigned long v = value;					\
-	if (__PORT_PCIO((port))) {					\
-		if ((port) < 256 && (port) > -256)			\
-			__asm__ __volatile__(				\
-			"strh	%0, [%1, %2]	@ outwc"		\
-			: : "r" (v), "r" (PCIO_BASE), "Jr" ((port)));	\
-		else if ((port) > 0)					\
-			__asm__ __volatile__(				\
-			"strh	%0, [%1, %2]	@ outwc"		\
-			: : "r" (v),					\
-			    "r" (PCIO_BASE + ((port) & ~0xff)),		\
-			     "Jr" (((port) & 0xff)));			\
-		else							\
-			__asm__ __volatile__(				\
-			"strh	%0, [%1, #0]	@ outwc"		\
-			: : "r" (v),					\
-			    "r" (PCIO_BASE + (port)));			\
-	} else								\
-		__asm__ __volatile__(					\
-		"strh	%0, [%1, #0]	@ outwc"			\
-		: : "r" (v), "r" ((port)));				\
-})
-
-#define __inwc(port)							\
-({									\
-	unsigned short result;						\
-	if (__PORT_PCIO((port))) {					\
-		if ((port) < 256 && (port) > -256 )			\
-			__asm__ __volatile__(				\
-			"ldrh	%0, [%1, %2]	@ inwc"			\
-			: "=r" (result)					\
-			: "r" (PCIO_BASE),				\
-			  "Jr" ((port)));				\
-		else if ((port) > 0)					\
-			__asm__ __volatile__(				\
-			"ldrh	%0, [%1, %2]	@ inwc"			\
-			: "=r" (result)					\
-			: "r" (PCIO_BASE + ((port) & ~0xff)),		\
-			  "Jr" (((port) & 0xff)));			\
-		else							\
-			__asm__ __volatile__(				\
-			"ldrh	%0, [%1, #0]	@ inwc"			\
-			: "=r" (result)					\
-			: "r" (PCIO_BASE + ((port))));			\
-	} else								\
-		__asm__ __volatile__(					\
-		"ldrh	%0, [%1, #0]	@ inwc"				\
-		: "=r" (result) : "r" ((port)));			\
-	result;								\
-})
-
-#define __outlc(value,port)						\
-({									\
-	unsigned long v = value;					\
-	if (__PORT_PCIO((port)))					\
-		__asm__ __volatile__(					\
-		"str	%0, [%1, %2]	@ outlc"			\
-		: : "r" (v), "r" (PCIO_BASE), "Jr" ((port)));	\
-	else								\
-		__asm__ __volatile__(					\
-		"str	%0, [%1, #0]	@ outlc"			\
-		: : "r" (v), "r" ((port)));		\
-})
-
-#define __inlc(port)							\
-({									\
-	unsigned long result;						\
-	if (__PORT_PCIO((port)))					\
-		__asm__ __volatile__(					\
-		"ldr	%0, [%1, %2]	@ inlc"				\
-		: "=r" (result) : "r" (PCIO_BASE), "Jr" ((port)));	\
-	else								\
-		__asm__ __volatile__(					\
-		"ldr	%0, [%1, #0]	@ inlc"				\
-		: "=r" (result) : "r" ((port)));		\
-	result;								\
-})
-
-#define __ioaddrc(port)	((__PORT_PCIO(port) ? PCIO_BASE + (port) : (void __iomem *)(port)))
-
-#define inb(p)		(__builtin_constant_p((p)) ? __inbc(p)	   : __inb(p))
-#define inw(p)		(__builtin_constant_p((p)) ? __inwc(p)	   : __inw(p))
-#define inl(p)		(__builtin_constant_p((p)) ? __inlc(p)	   : __inl(p))
-#define outb(v,p)	(__builtin_constant_p((p)) ? __outbc(v,p) : __outb(v,p))
-#define outw(v,p)	(__builtin_constant_p((p)) ? __outwc(v,p) : __outw(v,p))
-#define outl(v,p)	(__builtin_constant_p((p)) ? __outlc(v,p) : __outl(v,p))
-#define __ioaddr(p)	(__builtin_constant_p((p)) ? __ioaddr(p)  : __ioaddrc(p))
-/* the following macro is deprecated */
-#define ioaddr(port)	__ioaddr((port))
-
-#define insb(p,d,l)	__raw_readsb(__ioaddr(p),d,l)
-#define insw(p,d,l)	__raw_readsw(__ioaddr(p),d,l)
-#define insl(p,d,l)	__raw_readsl(__ioaddr(p),d,l)
-
-#define outsb(p,d,l)	__raw_writesb(__ioaddr(p),d,l)
-#define outsw(p,d,l)	__raw_writesw(__ioaddr(p),d,l)
-#define outsl(p,d,l)	__raw_writesl(__ioaddr(p),d,l)
-
-/*
- * 1:1 mapping for ioremapped regions.
- */
-#define __mem_pci(x)	(x)
-
-#endif
diff --git a/include/asm-arm/arch-s3c2410/irqs.h b/include/asm-arm/arch-s3c2410/irqs.h
deleted file mode 100644
index f5435d8c3769..000000000000
--- a/include/asm-arm/arch-s3c2410/irqs.h
+++ /dev/null
@@ -1,166 +0,0 @@
-/* linux/include/asm-arm/arch-s3c2410/irqs.h
- *
- * Copyright (c) 2003-2005 Simtec Electronics
- *   Ben Dooks <ben@simtec.co.uk>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-
-#ifndef __ASM_ARCH_IRQS_H
-#define __ASM_ARCH_IRQS_H __FILE__
-
-#ifndef __ASM_ARM_IRQ_H
-#error "Do not include this directly, instead #include <asm/irq.h>"
-#endif
-
-/* we keep the first set of CPU IRQs out of the range of
- * the ISA space, so that the PC104 has them to itself
- * and we don't end up having to do horrible things to the
- * standard ISA drivers....
- */
-
-#define S3C2410_CPUIRQ_OFFSET	 (16)
-
-#define S3C2410_IRQ(x) ((x) + S3C2410_CPUIRQ_OFFSET)
-
-/* main cpu interrupts */
-#define IRQ_EINT0      S3C2410_IRQ(0)	    /* 16 */
-#define IRQ_EINT1      S3C2410_IRQ(1)
-#define IRQ_EINT2      S3C2410_IRQ(2)
-#define IRQ_EINT3      S3C2410_IRQ(3)
-#define IRQ_EINT4t7    S3C2410_IRQ(4)	    /* 20 */
-#define IRQ_EINT8t23   S3C2410_IRQ(5)
-#define IRQ_RESERVED6  S3C2410_IRQ(6)	    /* for s3c2410 */
-#define IRQ_CAM        S3C2410_IRQ(6)	    /* for s3c2440,s3c2443 */
-#define IRQ_BATT_FLT   S3C2410_IRQ(7)
-#define IRQ_TICK       S3C2410_IRQ(8)	    /* 24 */
-#define IRQ_WDT	       S3C2410_IRQ(9)	    /* WDT/AC97 for s3c2443 */
-#define IRQ_TIMER0     S3C2410_IRQ(10)
-#define IRQ_TIMER1     S3C2410_IRQ(11)
-#define IRQ_TIMER2     S3C2410_IRQ(12)
-#define IRQ_TIMER3     S3C2410_IRQ(13)
-#define IRQ_TIMER4     S3C2410_IRQ(14)
-#define IRQ_UART2      S3C2410_IRQ(15)
-#define IRQ_LCD	       S3C2410_IRQ(16)	    /* 32 */
-#define IRQ_DMA0       S3C2410_IRQ(17)	    /* IRQ_DMA for s3c2443 */
-#define IRQ_DMA1       S3C2410_IRQ(18)
-#define IRQ_DMA2       S3C2410_IRQ(19)
-#define IRQ_DMA3       S3C2410_IRQ(20)
-#define IRQ_SDI	       S3C2410_IRQ(21)
-#define IRQ_SPI0       S3C2410_IRQ(22)
-#define IRQ_UART1      S3C2410_IRQ(23)
-#define IRQ_RESERVED24 S3C2410_IRQ(24)	    /* 40 */
-#define IRQ_NFCON      S3C2410_IRQ(24)	    /* for s3c2440 */
-#define IRQ_USBD       S3C2410_IRQ(25)
-#define IRQ_USBH       S3C2410_IRQ(26)
-#define IRQ_IIC	       S3C2410_IRQ(27)
-#define IRQ_UART0      S3C2410_IRQ(28)	    /* 44 */
-#define IRQ_SPI1       S3C2410_IRQ(29)
-#define IRQ_RTC	       S3C2410_IRQ(30)
-#define IRQ_ADCPARENT  S3C2410_IRQ(31)
-
-/* interrupts generated from the external interrupts sources */
-#define IRQ_EINT4      S3C2410_IRQ(32)	   /* 48 */
-#define IRQ_EINT5      S3C2410_IRQ(33)
-#define IRQ_EINT6      S3C2410_IRQ(34)
-#define IRQ_EINT7      S3C2410_IRQ(35)
-#define IRQ_EINT8      S3C2410_IRQ(36)
-#define IRQ_EINT9      S3C2410_IRQ(37)
-#define IRQ_EINT10     S3C2410_IRQ(38)
-#define IRQ_EINT11     S3C2410_IRQ(39)
-#define IRQ_EINT12     S3C2410_IRQ(40)
-#define IRQ_EINT13     S3C2410_IRQ(41)
-#define IRQ_EINT14     S3C2410_IRQ(42)
-#define IRQ_EINT15     S3C2410_IRQ(43)
-#define IRQ_EINT16     S3C2410_IRQ(44)
-#define IRQ_EINT17     S3C2410_IRQ(45)
-#define IRQ_EINT18     S3C2410_IRQ(46)
-#define IRQ_EINT19     S3C2410_IRQ(47)
-#define IRQ_EINT20     S3C2410_IRQ(48)	   /* 64 */
-#define IRQ_EINT21     S3C2410_IRQ(49)
-#define IRQ_EINT22     S3C2410_IRQ(50)
-#define IRQ_EINT23     S3C2410_IRQ(51)
-
-
-#define IRQ_EINT(x)    (((x) >= 4) ? (IRQ_EINT4 + (x) - 4) : (IRQ_EINT0 + (x)))
-
-#define IRQ_LCD_FIFO   S3C2410_IRQ(52)
-#define IRQ_LCD_FRAME  S3C2410_IRQ(53)
-
-/* IRQs for the interal UARTs, and ADC
- * these need to be ordered in number of appearance in the
- * SUBSRC mask register
-*/
-
-#define S3C2410_IRQSUB(x)	S3C2410_IRQ((x)+54)
-
-#define IRQ_S3CUART_RX0		S3C2410_IRQSUB(0)	/* 70 */
-#define IRQ_S3CUART_TX0		S3C2410_IRQSUB(1)
-#define IRQ_S3CUART_ERR0	S3C2410_IRQSUB(2)
-
-#define IRQ_S3CUART_RX1		S3C2410_IRQSUB(3)	/* 73 */
-#define IRQ_S3CUART_TX1		S3C2410_IRQSUB(4)
-#define IRQ_S3CUART_ERR1	S3C2410_IRQSUB(5)
-
-#define IRQ_S3CUART_RX2		S3C2410_IRQSUB(6)	/* 76 */
-#define IRQ_S3CUART_TX2		S3C2410_IRQSUB(7)
-#define IRQ_S3CUART_ERR2	S3C2410_IRQSUB(8)
-
-#define IRQ_TC			S3C2410_IRQSUB(9)
-#define IRQ_ADC			S3C2410_IRQSUB(10)
-
-/* extra irqs for s3c2412 */
-
-#define IRQ_S3C2412_CFSDI	S3C2410_IRQ(21)
-
-#define IRQ_S3C2412_SDI		S3C2410_IRQSUB(13)
-#define IRQ_S3C2412_CF		S3C2410_IRQSUB(14)
-
-/* extra irqs for s3c2440 */
-
-#define IRQ_S3C2440_CAM_C	S3C2410_IRQSUB(11)	/* S3C2443 too */
-#define IRQ_S3C2440_CAM_P	S3C2410_IRQSUB(12)	/* S3C2443 too */
-#define IRQ_S3C2440_WDT		S3C2410_IRQSUB(13)
-#define IRQ_S3C2440_AC97	S3C2410_IRQSUB(14)
-
-/* irqs for s3c2443 */
-
-#define IRQ_S3C2443_DMA		S3C2410_IRQ(17)		/* IRQ_DMA1 */
-#define IRQ_S3C2443_UART3	S3C2410_IRQ(18)		/* IRQ_DMA2 */
-#define IRQ_S3C2443_CFCON	S3C2410_IRQ(19)		/* IRQ_DMA3 */
-#define IRQ_S3C2443_HSMMC	S3C2410_IRQ(20)		/* IRQ_SDI */
-#define IRQ_S3C2443_NAND	S3C2410_IRQ(24)		/* reserved */
-
-#define IRQ_S3C2443_LCD1	S3C2410_IRQSUB(14)
-#define IRQ_S3C2443_LCD2	S3C2410_IRQSUB(15)
-#define IRQ_S3C2443_LCD3	S3C2410_IRQSUB(16)
-#define IRQ_S3C2443_LCD4	S3C2410_IRQSUB(17)
-
-#define IRQ_S3C2443_DMA0	S3C2410_IRQSUB(18)
-#define IRQ_S3C2443_DMA1	S3C2410_IRQSUB(19)
-#define IRQ_S3C2443_DMA2	S3C2410_IRQSUB(20)
-#define IRQ_S3C2443_DMA3	S3C2410_IRQSUB(21)
-#define IRQ_S3C2443_DMA4	S3C2410_IRQSUB(22)
-#define IRQ_S3C2443_DMA5	S3C2410_IRQSUB(23)
-
-/* UART3 */
-#define IRQ_S3C2443_RX3		S3C2410_IRQSUB(24)
-#define IRQ_S3C2443_TX3		S3C2410_IRQSUB(25)
-#define IRQ_S3C2443_ERR3	S3C2410_IRQSUB(26)
-
-#define IRQ_S3C2443_WDT		S3C2410_IRQSUB(27)
-#define IRQ_S3C2443_AC97	S3C2410_IRQSUB(28)
-
-#ifdef CONFIG_CPU_S3C2443
-#define NR_IRQS (IRQ_S3C2443_AC97+1)
-#else
-#define NR_IRQS (IRQ_S3C2440_AC97+1)
-#endif
-
-/* Our FIQs are routable from IRQ_EINT0 to IRQ_ADCPARENT */
-#define FIQ_START		IRQ_EINT0
-
-#endif /* __ASM_ARCH_IRQ_H */
diff --git a/include/asm-arm/arch-s3c2410/map.h b/include/asm-arm/arch-s3c2410/map.h
deleted file mode 100644
index b33ed3b05ef5..000000000000
--- a/include/asm-arm/arch-s3c2410/map.h
+++ /dev/null
@@ -1,178 +0,0 @@
-/* linux/include/asm-arm/arch-s3c2410/map.h
- *
- * Copyright (c) 2003 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * S3C2410 - Memory map definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_MAP_H
-#define __ASM_ARCH_MAP_H
-
-#include <asm/plat-s3c/map.h>
-
-#define S3C2410_ADDR(x)		S3C_ADDR(x)
-
-/* interrupt controller is the first thing we put in, to make
- * the assembly code for the irq detection easier
- */
-#define S3C24XX_VA_IRQ	   S3C_VA_IRQ
-#define S3C2410_PA_IRQ	   (0x4A000000)
-#define S3C24XX_SZ_IRQ	   SZ_1M
-
-/* memory controller registers */
-#define S3C24XX_VA_MEMCTRL S3C_VA_MEM
-#define S3C2410_PA_MEMCTRL (0x48000000)
-#define S3C24XX_SZ_MEMCTRL SZ_1M
-
-/* USB host controller */
-#define S3C2410_PA_USBHOST (0x49000000)
-#define S3C24XX_SZ_USBHOST SZ_1M
-
-/* DMA controller */
-#define S3C2410_PA_DMA	   (0x4B000000)
-#define S3C24XX_SZ_DMA	   SZ_1M
-
-/* Clock and Power management */
-#define S3C24XX_VA_CLKPWR  S3C_VA_SYS
-#define S3C2410_PA_CLKPWR  (0x4C000000)
-#define S3C24XX_SZ_CLKPWR  SZ_1M
-
-/* LCD controller */
-#define S3C2410_PA_LCD	   (0x4D000000)
-#define S3C24XX_SZ_LCD	   SZ_1M
-
-/* NAND flash controller */
-#define S3C2410_PA_NAND	   (0x4E000000)
-#define S3C24XX_SZ_NAND	   SZ_1M
-
-/* UARTs */
-#define S3C24XX_VA_UART	   S3C_VA_UART
-#define S3C2410_PA_UART	   (0x50000000)
-#define S3C24XX_SZ_UART	   SZ_1M
-
-/* Timers */
-#define S3C24XX_VA_TIMER   S3C_VA_TIMER
-#define S3C2410_PA_TIMER   (0x51000000)
-#define S3C24XX_SZ_TIMER   SZ_1M
-
-/* USB Device port */
-#define S3C2410_PA_USBDEV  (0x52000000)
-#define S3C24XX_SZ_USBDEV  SZ_1M
-
-/* Watchdog */
-#define S3C24XX_VA_WATCHDOG S3C_VA_WATCHDOG
-#define S3C2410_PA_WATCHDOG (0x53000000)
-#define S3C24XX_SZ_WATCHDOG SZ_1M
-
-/* IIC hardware controller */
-#define S3C2410_PA_IIC	   (0x54000000)
-#define S3C24XX_SZ_IIC	   SZ_1M
-
-/* IIS controller */
-#define S3C2410_PA_IIS	   (0x55000000)
-#define S3C24XX_SZ_IIS	   SZ_1M
-
-/* GPIO ports */
-
-/* the calculation for the VA of this must ensure that
- * it is the same distance apart from the UART in the
- * phsyical address space, as the initial mapping for the IO
- * is done as a 1:1 maping. This puts it (currently) at
- * 0xFA800000, which is not in the way of any current mapping
- * by the base system.
-*/
-
-#define S3C2410_PA_GPIO	   (0x56000000)
-#define S3C24XX_VA_GPIO	   ((S3C2410_PA_GPIO - S3C24XX_PA_UART) + S3C24XX_VA_UART)
-#define S3C24XX_SZ_GPIO	   SZ_1M
-
-/* RTC */
-#define S3C2410_PA_RTC	   (0x57000000)
-#define S3C24XX_SZ_RTC	   SZ_1M
-
-/* ADC */
-#define S3C2410_PA_ADC	   (0x58000000)
-#define S3C24XX_SZ_ADC	   SZ_1M
-
-/* SPI */
-#define S3C2410_PA_SPI	   (0x59000000)
-#define S3C24XX_SZ_SPI	   SZ_1M
-
-/* SDI */
-#define S3C2410_PA_SDI	   (0x5A000000)
-#define S3C24XX_SZ_SDI	   SZ_1M
-
-/* CAMIF */
-#define S3C2440_PA_CAMIF   (0x4F000000)
-#define S3C2440_SZ_CAMIF   SZ_1M
-
-/* AC97 */
-
-#define S3C2440_PA_AC97	   (0x5B000000)
-#define S3C2440_SZ_AC97	   SZ_1M
-
-/* S3C2443 High-speed SD/MMC */
-#define S3C2443_PA_HSMMC   (0x4A800000)
-#define S3C2443_SZ_HSMMC   (256)
-
-/* ISA style IO, for each machine to sort out mappings for, if it
- * implements it. We reserve two 16M regions for ISA.
- */
-
-#define S3C24XX_VA_ISA_WORD  S3C2410_ADDR(0x02000000)
-#define S3C24XX_VA_ISA_BYTE  S3C2410_ADDR(0x03000000)
-
-/* physical addresses of all the chip-select areas */
-
-#define S3C2410_CS0 (0x00000000)
-#define S3C2410_CS1 (0x08000000)
-#define S3C2410_CS2 (0x10000000)
-#define S3C2410_CS3 (0x18000000)
-#define S3C2410_CS4 (0x20000000)
-#define S3C2410_CS5 (0x28000000)
-#define S3C2410_CS6 (0x30000000)
-#define S3C2410_CS7 (0x38000000)
-
-#define S3C2410_SDRAM_PA    (S3C2410_CS6)
-
-/* Use a single interface for common resources between S3C24XX cpus */
-
-#define S3C24XX_PA_IRQ      S3C2410_PA_IRQ
-#define S3C24XX_PA_MEMCTRL  S3C2410_PA_MEMCTRL
-#define S3C24XX_PA_USBHOST  S3C2410_PA_USBHOST
-#define S3C24XX_PA_DMA      S3C2410_PA_DMA
-#define S3C24XX_PA_CLKPWR   S3C2410_PA_CLKPWR
-#define S3C24XX_PA_LCD      S3C2410_PA_LCD
-#define S3C24XX_PA_UART     S3C2410_PA_UART
-#define S3C24XX_PA_TIMER    S3C2410_PA_TIMER
-#define S3C24XX_PA_USBDEV   S3C2410_PA_USBDEV
-#define S3C24XX_PA_WATCHDOG S3C2410_PA_WATCHDOG
-#define S3C24XX_PA_IIC      S3C2410_PA_IIC
-#define S3C24XX_PA_IIS      S3C2410_PA_IIS
-#define S3C24XX_PA_GPIO     S3C2410_PA_GPIO
-#define S3C24XX_PA_RTC      S3C2410_PA_RTC
-#define S3C24XX_PA_ADC      S3C2410_PA_ADC
-#define S3C24XX_PA_SPI      S3C2410_PA_SPI
-
-/* deal with the registers that move under the 2412/2413 */
-
-#if defined(CONFIG_CPU_S3C2412) || defined(CONFIG_CPU_S3C2413)
-#ifndef __ASSEMBLY__
-extern void __iomem *s3c24xx_va_gpio2;
-#endif
-#ifdef CONFIG_CPU_S3C2412_ONLY
-#define S3C24XX_VA_GPIO2 (S3C24XX_VA_GPIO + 0x10)
-#else
-#define S3C24XX_VA_GPIO2 s3c24xx_va_gpio2
-#endif
-#else
-#define s3c24xx_va_gpio2 S3C24XX_VA_GPIO
-#define S3C24XX_VA_GPIO2 S3C24XX_VA_GPIO
-#endif
-
-#endif /* __ASM_ARCH_MAP_H */
diff --git a/include/asm-arm/arch-s3c2410/memory.h b/include/asm-arm/arch-s3c2410/memory.h
deleted file mode 100644
index 533e2436e707..000000000000
--- a/include/asm-arm/arch-s3c2410/memory.h
+++ /dev/null
@@ -1,19 +0,0 @@
-/* linux/include/asm-arm/arch-s3c2410/memory.h
- *  from linux/include/asm-arm/arch-rpc/memory.h
- *
- *  Copyright (C) 1996,1997,1998 Russell King.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_MEMORY_H
-#define __ASM_ARCH_MEMORY_H
-
-#define PHYS_OFFSET	UL(0x30000000)
-
-#define __virt_to_bus(x) __virt_to_phys(x)
-#define __bus_to_virt(x) __phys_to_virt(x)
-
-#endif
diff --git a/include/asm-arm/arch-s3c2410/regs-gpio.h b/include/asm-arm/arch-s3c2410/regs-gpio.h
deleted file mode 100644
index 497dd06e2c99..000000000000
--- a/include/asm-arm/arch-s3c2410/regs-gpio.h
+++ /dev/null
@@ -1,1163 +0,0 @@
-/* linux/include/asm-arm/arch-s3c2410/regs-gpio.h
- *
- * Copyright (c) 2003,2004 Simtec Electronics <linux@simtec.co.uk>
- *		           http://www.simtec.co.uk/products/SWLINUX/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * S3C2410 GPIO register definitions
-*/
-
-
-#ifndef __ASM_ARCH_REGS_GPIO_H
-#define __ASM_ARCH_REGS_GPIO_H "$Id: gpio.h,v 1.5 2003/05/19 12:51:08 ben Exp $"
-
-#define S3C2410_GPIONO(bank,offset) ((bank) + (offset))
-
-#define S3C2410_GPIO_BANKA   (32*0)
-#define S3C2410_GPIO_BANKB   (32*1)
-#define S3C2410_GPIO_BANKC   (32*2)
-#define S3C2410_GPIO_BANKD   (32*3)
-#define S3C2410_GPIO_BANKE   (32*4)
-#define S3C2410_GPIO_BANKF   (32*5)
-#define S3C2410_GPIO_BANKG   (32*6)
-#define S3C2410_GPIO_BANKH   (32*7)
-
-#ifdef CONFIG_CPU_S3C2400
-#define S3C24XX_GPIO_BASE(x)  S3C2400_GPIO_BASE(x)
-#define S3C24XX_MISCCR        S3C2400_MISCCR
-#else
-#define S3C24XX_GPIO_BASE(x)  S3C2410_GPIO_BASE(x)
-#define S3C24XX_MISCCR	      S3C24XX_GPIOREG2(0x80)
-#endif /* CONFIG_CPU_S3C2400 */
-
-
-/* S3C2400 doesn't have a 1:1 mapping to S3C2410 gpio base pins */
-
-#define S3C2400_BANKNUM(pin)     (((pin) & ~31) / 32)
-#define S3C2400_BASEA2B(pin)     ((((pin) & ~31) >> 2))
-#define S3C2400_BASEC2H(pin)     ((S3C2400_BANKNUM(pin) * 10) + \
-                                 (2 * (S3C2400_BANKNUM(pin)-2)))
-
-#define S3C2400_GPIO_BASE(pin)   (pin < S3C2410_GPIO_BANKC ? \
-                                 S3C2400_BASEA2B(pin)+S3C24XX_VA_GPIO : \
-                                 S3C2400_BASEC2H(pin)+S3C24XX_VA_GPIO)
-
-
-#define S3C2410_GPIO_BASE(pin)   ((((pin) & ~31) >> 1) + S3C24XX_VA_GPIO)
-#define S3C2410_GPIO_OFFSET(pin) ((pin) & 31)
-
-/* general configuration options */
-
-#define S3C2410_GPIO_LEAVE   (0xFFFFFFFF)
-#define S3C2410_GPIO_INPUT   (0xFFFFFFF0)	/* not available on A */
-#define S3C2410_GPIO_OUTPUT  (0xFFFFFFF1)
-#define S3C2410_GPIO_IRQ     (0xFFFFFFF2)	/* not available for all */
-#define S3C2410_GPIO_SFN2    (0xFFFFFFF2)	/* bank A => addr/cs/nand */
-#define S3C2410_GPIO_SFN3    (0xFFFFFFF3)	/* not available on A */
-
-/* register address for the GPIO registers.
- * S3C24XX_GPIOREG2 is for the second set of registers in the
- * GPIO which move between s3c2410 and s3c2412 type systems */
-
-#define S3C2410_GPIOREG(x) ((x) + S3C24XX_VA_GPIO)
-#define S3C24XX_GPIOREG2(x) ((x) + S3C24XX_VA_GPIO2)
-
-
-/* configure GPIO ports A..G */
-
-/* port A - S3C2410: 22bits, zero in bit X makes pin X output
- *          S3C2400: 18bits, zero in bit X makes pin X output
- * 1 makes port special function, this is default
-*/
-#define S3C2410_GPACON	   S3C2410_GPIOREG(0x00)
-#define S3C2410_GPADAT	   S3C2410_GPIOREG(0x04)
-
-#define S3C2400_GPACON	   S3C2410_GPIOREG(0x00)
-#define S3C2400_GPADAT	   S3C2410_GPIOREG(0x04)
-
-#define S3C2410_GPA0         S3C2410_GPIONO(S3C2410_GPIO_BANKA, 0)
-#define S3C2410_GPA0_OUT     (0<<0)
-#define S3C2410_GPA0_ADDR0   (1<<0)
-
-#define S3C2410_GPA1         S3C2410_GPIONO(S3C2410_GPIO_BANKA, 1)
-#define S3C2410_GPA1_OUT     (0<<1)
-#define S3C2410_GPA1_ADDR16  (1<<1)
-
-#define S3C2410_GPA2         S3C2410_GPIONO(S3C2410_GPIO_BANKA, 2)
-#define S3C2410_GPA2_OUT     (0<<2)
-#define S3C2410_GPA2_ADDR17  (1<<2)
-
-#define S3C2410_GPA3         S3C2410_GPIONO(S3C2410_GPIO_BANKA, 3)
-#define S3C2410_GPA3_OUT     (0<<3)
-#define S3C2410_GPA3_ADDR18  (1<<3)
-
-#define S3C2410_GPA4         S3C2410_GPIONO(S3C2410_GPIO_BANKA, 4)
-#define S3C2410_GPA4_OUT     (0<<4)
-#define S3C2410_GPA4_ADDR19  (1<<4)
-
-#define S3C2410_GPA5         S3C2410_GPIONO(S3C2410_GPIO_BANKA, 5)
-#define S3C2410_GPA5_OUT     (0<<5)
-#define S3C2410_GPA5_ADDR20  (1<<5)
-
-#define S3C2410_GPA6         S3C2410_GPIONO(S3C2410_GPIO_BANKA, 6)
-#define S3C2410_GPA6_OUT     (0<<6)
-#define S3C2410_GPA6_ADDR21  (1<<6)
-
-#define S3C2410_GPA7         S3C2410_GPIONO(S3C2410_GPIO_BANKA, 7)
-#define S3C2410_GPA7_OUT     (0<<7)
-#define S3C2410_GPA7_ADDR22  (1<<7)
-
-#define S3C2410_GPA8         S3C2410_GPIONO(S3C2410_GPIO_BANKA, 8)
-#define S3C2410_GPA8_OUT     (0<<8)
-#define S3C2410_GPA8_ADDR23  (1<<8)
-
-#define S3C2410_GPA9         S3C2410_GPIONO(S3C2410_GPIO_BANKA, 9)
-#define S3C2410_GPA9_OUT     (0<<9)
-#define S3C2410_GPA9_ADDR24  (1<<9)
-
-#define S3C2410_GPA10        S3C2410_GPIONO(S3C2410_GPIO_BANKA, 10)
-#define S3C2410_GPA10_OUT    (0<<10)
-#define S3C2410_GPA10_ADDR25 (1<<10)
-#define S3C2400_GPA10_SCKE   (1<<10)
-
-#define S3C2410_GPA11        S3C2410_GPIONO(S3C2410_GPIO_BANKA, 11)
-#define S3C2410_GPA11_OUT    (0<<11)
-#define S3C2410_GPA11_ADDR26 (1<<11)
-#define S3C2400_GPA11_nCAS0  (1<<11)
-
-#define S3C2410_GPA12        S3C2410_GPIONO(S3C2410_GPIO_BANKA, 12)
-#define S3C2410_GPA12_OUT    (0<<12)
-#define S3C2410_GPA12_nGCS1  (1<<12)
-#define S3C2400_GPA12_nCAS1  (1<<12)
-
-#define S3C2410_GPA13        S3C2410_GPIONO(S3C2410_GPIO_BANKA, 13)
-#define S3C2410_GPA13_OUT    (0<<13)
-#define S3C2410_GPA13_nGCS2  (1<<13)
-#define S3C2400_GPA13_nGCS1  (1<<13)
-
-#define S3C2410_GPA14        S3C2410_GPIONO(S3C2410_GPIO_BANKA, 14)
-#define S3C2410_GPA14_OUT    (0<<14)
-#define S3C2410_GPA14_nGCS3  (1<<14)
-#define S3C2400_GPA14_nGCS2  (1<<14)
-
-#define S3C2410_GPA15        S3C2410_GPIONO(S3C2410_GPIO_BANKA, 15)
-#define S3C2410_GPA15_OUT    (0<<15)
-#define S3C2410_GPA15_nGCS4  (1<<15)
-#define S3C2400_GPA15_nGCS3  (1<<15)
-
-#define S3C2410_GPA16        S3C2410_GPIONO(S3C2410_GPIO_BANKA, 16)
-#define S3C2410_GPA16_OUT    (0<<16)
-#define S3C2410_GPA16_nGCS5  (1<<16)
-#define S3C2400_GPA16_nGCS4  (1<<16)
-
-#define S3C2410_GPA17        S3C2410_GPIONO(S3C2410_GPIO_BANKA, 17)
-#define S3C2410_GPA17_OUT    (0<<17)
-#define S3C2410_GPA17_CLE    (1<<17)
-#define S3C2400_GPA17_nGCS5  (1<<17)
-
-#define S3C2410_GPA18        S3C2410_GPIONO(S3C2410_GPIO_BANKA, 18)
-#define S3C2410_GPA18_OUT    (0<<18)
-#define S3C2410_GPA18_ALE    (1<<18)
-
-#define S3C2410_GPA19        S3C2410_GPIONO(S3C2410_GPIO_BANKA, 19)
-#define S3C2410_GPA19_OUT    (0<<19)
-#define S3C2410_GPA19_nFWE   (1<<19)
-
-#define S3C2410_GPA20        S3C2410_GPIONO(S3C2410_GPIO_BANKA, 20)
-#define S3C2410_GPA20_OUT    (0<<20)
-#define S3C2410_GPA20_nFRE   (1<<20)
-
-#define S3C2410_GPA21        S3C2410_GPIONO(S3C2410_GPIO_BANKA, 21)
-#define S3C2410_GPA21_OUT    (0<<21)
-#define S3C2410_GPA21_nRSTOUT (1<<21)
-
-#define S3C2410_GPA22        S3C2410_GPIONO(S3C2410_GPIO_BANKA, 22)
-#define S3C2410_GPA22_OUT    (0<<22)
-#define S3C2410_GPA22_nFCE   (1<<22)
-
-/* 0x08 and 0x0c are reserved on S3C2410 */
-
-/* S3C2410:
- * GPB is 10 IO pins, each configured by 2 bits each in GPBCON.
- *   00 = input, 01 = output, 10=special function, 11=reserved
-
- * S3C2400:
- * GPB is 16 IO pins, each configured by 2 bits each in GPBCON.
- *   00 = input, 01 = output, 10=data, 11=special function
-
- * bit 0,1 = pin 0, 2,3= pin 1...
- *
- * CPBUP = pull up resistor control, 1=disabled, 0=enabled
-*/
-
-#define S3C2410_GPBCON	   S3C2410_GPIOREG(0x10)
-#define S3C2410_GPBDAT	   S3C2410_GPIOREG(0x14)
-#define S3C2410_GPBUP	   S3C2410_GPIOREG(0x18)
-
-#define S3C2400_GPBCON	   S3C2410_GPIOREG(0x08)
-#define S3C2400_GPBDAT	   S3C2410_GPIOREG(0x0C)
-#define S3C2400_GPBUP	   S3C2410_GPIOREG(0x10)
-
-/* no i/o pin in port b can have value 3 (unless it is a s3c2443) ! */
-
-#define S3C2410_GPB0         S3C2410_GPIONO(S3C2410_GPIO_BANKB, 0)
-#define S3C2410_GPB0_INP     (0x00 << 0)
-#define S3C2410_GPB0_OUTP    (0x01 << 0)
-#define S3C2410_GPB0_TOUT0   (0x02 << 0)
-#define S3C2400_GPB0_DATA16  (0x02 << 0)
-
-#define S3C2410_GPB1         S3C2410_GPIONO(S3C2410_GPIO_BANKB, 1)
-#define S3C2410_GPB1_INP     (0x00 << 2)
-#define S3C2410_GPB1_OUTP    (0x01 << 2)
-#define S3C2410_GPB1_TOUT1   (0x02 << 2)
-#define S3C2400_GPB1_DATA17  (0x02 << 2)
-
-#define S3C2410_GPB2         S3C2410_GPIONO(S3C2410_GPIO_BANKB, 2)
-#define S3C2410_GPB2_INP     (0x00 << 4)
-#define S3C2410_GPB2_OUTP    (0x01 << 4)
-#define S3C2410_GPB2_TOUT2   (0x02 << 4)
-#define S3C2400_GPB2_DATA18  (0x02 << 4)
-#define S3C2400_GPB2_TCLK1   (0x03 << 4)
-
-#define S3C2410_GPB3         S3C2410_GPIONO(S3C2410_GPIO_BANKB, 3)
-#define S3C2410_GPB3_INP     (0x00 << 6)
-#define S3C2410_GPB3_OUTP    (0x01 << 6)
-#define S3C2410_GPB3_TOUT3   (0x02 << 6)
-#define S3C2400_GPB3_DATA19  (0x02 << 6)
-#define S3C2400_GPB3_TXD1    (0x03 << 6)
-
-#define S3C2410_GPB4         S3C2410_GPIONO(S3C2410_GPIO_BANKB, 4)
-#define S3C2410_GPB4_INP     (0x00 << 8)
-#define S3C2410_GPB4_OUTP    (0x01 << 8)
-#define S3C2410_GPB4_TCLK0   (0x02 << 8)
-#define S3C2400_GPB4_DATA20  (0x02 << 8)
-#define S3C2410_GPB4_MASK    (0x03 << 8)
-#define S3C2400_GPB4_RXD1    (0x03 << 8)
-#define S3C2400_GPB4_MASK    (0x03 << 8)
-
-#define S3C2410_GPB5         S3C2410_GPIONO(S3C2410_GPIO_BANKB, 5)
-#define S3C2410_GPB5_INP     (0x00 << 10)
-#define S3C2410_GPB5_OUTP    (0x01 << 10)
-#define S3C2410_GPB5_nXBACK  (0x02 << 10)
-#define S3C2443_GPB5_XBACK   (0x03 << 10)
-#define S3C2400_GPB5_DATA21  (0x02 << 10)
-#define S3C2400_GPB5_nCTS1   (0x03 << 10)
-
-#define S3C2410_GPB6         S3C2410_GPIONO(S3C2410_GPIO_BANKB, 6)
-#define S3C2410_GPB6_INP     (0x00 << 12)
-#define S3C2410_GPB6_OUTP    (0x01 << 12)
-#define S3C2410_GPB6_nXBREQ  (0x02 << 12)
-#define S3C2443_GPB6_XBREQ   (0x03 << 12)
-#define S3C2400_GPB6_DATA22  (0x02 << 12)
-#define S3C2400_GPB6_nRTS1   (0x03 << 12)
-
-#define S3C2410_GPB7         S3C2410_GPIONO(S3C2410_GPIO_BANKB, 7)
-#define S3C2410_GPB7_INP     (0x00 << 14)
-#define S3C2410_GPB7_OUTP    (0x01 << 14)
-#define S3C2410_GPB7_nXDACK1 (0x02 << 14)
-#define S3C2443_GPB7_XDACK1  (0x03 << 14)
-#define S3C2400_GPB7_DATA23  (0x02 << 14)
-
-#define S3C2410_GPB8         S3C2410_GPIONO(S3C2410_GPIO_BANKB, 8)
-#define S3C2410_GPB8_INP     (0x00 << 16)
-#define S3C2410_GPB8_OUTP    (0x01 << 16)
-#define S3C2410_GPB8_nXDREQ1 (0x02 << 16)
-#define S3C2400_GPB8_DATA24  (0x02 << 16)
-
-#define S3C2410_GPB9         S3C2410_GPIONO(S3C2410_GPIO_BANKB, 9)
-#define S3C2410_GPB9_INP     (0x00 << 18)
-#define S3C2410_GPB9_OUTP    (0x01 << 18)
-#define S3C2410_GPB9_nXDACK0 (0x02 << 18)
-#define S3C2443_GPB9_XDACK0  (0x03 << 18)
-#define S3C2400_GPB9_DATA25  (0x02 << 18)
-#define S3C2400_GPB9_I2SSDI  (0x03 << 18)
-
-#define S3C2410_GPB10        S3C2410_GPIONO(S3C2410_GPIO_BANKB, 10)
-#define S3C2410_GPB10_INP    (0x00 << 20)
-#define S3C2410_GPB10_OUTP   (0x01 << 20)
-#define S3C2410_GPB10_nXDRE0 (0x02 << 20)
-#define S3C2443_GPB10_XDREQ0 (0x03 << 20)
-#define S3C2400_GPB10_DATA26 (0x02 << 20)
-#define S3C2400_GPB10_nSS    (0x03 << 20)
-
-#define S3C2400_GPB11        S3C2410_GPIONO(S3C2410_GPIO_BANKB, 11)
-#define S3C2400_GPB11_INP    (0x00 << 22)
-#define S3C2400_GPB11_OUTP   (0x01 << 22)
-#define S3C2400_GPB11_DATA27 (0x02 << 22)
-
-#define S3C2400_GPB12        S3C2410_GPIONO(S3C2410_GPIO_BANKB, 12)
-#define S3C2400_GPB12_INP    (0x00 << 24)
-#define S3C2400_GPB12_OUTP   (0x01 << 24)
-#define S3C2400_GPB12_DATA28 (0x02 << 24)
-
-#define S3C2400_GPB13        S3C2410_GPIONO(S3C2410_GPIO_BANKB, 13)
-#define S3C2400_GPB13_INP    (0x00 << 26)
-#define S3C2400_GPB13_OUTP   (0x01 << 26)
-#define S3C2400_GPB13_DATA29 (0x02 << 26)
-
-#define S3C2400_GPB14        S3C2410_GPIONO(S3C2410_GPIO_BANKB, 14)
-#define S3C2400_GPB14_INP    (0x00 << 28)
-#define S3C2400_GPB14_OUTP   (0x01 << 28)
-#define S3C2400_GPB14_DATA30 (0x02 << 28)
-
-#define S3C2400_GPB15        S3C2410_GPIONO(S3C2410_GPIO_BANKB, 15)
-#define S3C2400_GPB15_INP    (0x00 << 30)
-#define S3C2400_GPB15_OUTP   (0x01 << 30)
-#define S3C2400_GPB15_DATA31 (0x02 << 30)
-
-#define S3C2410_GPB_PUPDIS(x)  (1<<(x))
-
-/* Port C consits of 16 GPIO/Special function
- *
- * almost identical setup to port b, but the special functions are mostly
- * to do with the video system's sync/etc.
-*/
-
-#define S3C2410_GPCCON	   S3C2410_GPIOREG(0x20)
-#define S3C2410_GPCDAT	   S3C2410_GPIOREG(0x24)
-#define S3C2410_GPCUP	   S3C2410_GPIOREG(0x28)
-
-#define S3C2400_GPCCON	   S3C2410_GPIOREG(0x14)
-#define S3C2400_GPCDAT	   S3C2410_GPIOREG(0x18)
-#define S3C2400_GPCUP	   S3C2410_GPIOREG(0x1C)
-
-#define S3C2410_GPC0            S3C2410_GPIONO(S3C2410_GPIO_BANKC, 0)
-#define S3C2410_GPC0_INP	(0x00 << 0)
-#define S3C2410_GPC0_OUTP	(0x01 << 0)
-#define S3C2410_GPC0_LEND	(0x02 << 0)
-#define S3C2400_GPC0_VD0 	(0x02 << 0)
-
-#define S3C2410_GPC1            S3C2410_GPIONO(S3C2410_GPIO_BANKC, 1)
-#define S3C2410_GPC1_INP	(0x00 << 2)
-#define S3C2410_GPC1_OUTP	(0x01 << 2)
-#define S3C2410_GPC1_VCLK	(0x02 << 2)
-#define S3C2400_GPC1_VD1 	(0x02 << 2)
-
-#define S3C2410_GPC2            S3C2410_GPIONO(S3C2410_GPIO_BANKC, 2)
-#define S3C2410_GPC2_INP	(0x00 << 4)
-#define S3C2410_GPC2_OUTP	(0x01 << 4)
-#define S3C2410_GPC2_VLINE	(0x02 << 4)
-#define S3C2400_GPC2_VD2  	(0x02 << 4)
-
-#define S3C2410_GPC3            S3C2410_GPIONO(S3C2410_GPIO_BANKC, 3)
-#define S3C2410_GPC3_INP	(0x00 << 6)
-#define S3C2410_GPC3_OUTP	(0x01 << 6)
-#define S3C2410_GPC3_VFRAME	(0x02 << 6)
-#define S3C2400_GPC3_VD3   	(0x02 << 6)
-
-#define S3C2410_GPC4            S3C2410_GPIONO(S3C2410_GPIO_BANKC, 4)
-#define S3C2410_GPC4_INP	(0x00 << 8)
-#define S3C2410_GPC4_OUTP	(0x01 << 8)
-#define S3C2410_GPC4_VM		(0x02 << 8)
-#define S3C2400_GPC4_VD4	(0x02 << 8)
-
-#define S3C2410_GPC5            S3C2410_GPIONO(S3C2410_GPIO_BANKC, 5)
-#define S3C2410_GPC5_INP	(0x00 << 10)
-#define S3C2410_GPC5_OUTP	(0x01 << 10)
-#define S3C2410_GPC5_LCDVF0	(0x02 << 10)
-#define S3C2400_GPC5_VD5   	(0x02 << 10)
-
-#define S3C2410_GPC6            S3C2410_GPIONO(S3C2410_GPIO_BANKC, 6)
-#define S3C2410_GPC6_INP	(0x00 << 12)
-#define S3C2410_GPC6_OUTP	(0x01 << 12)
-#define S3C2410_GPC6_LCDVF1	(0x02 << 12)
-#define S3C2400_GPC6_VD6   	(0x02 << 12)
-
-#define S3C2410_GPC7            S3C2410_GPIONO(S3C2410_GPIO_BANKC, 7)
-#define S3C2410_GPC7_INP	(0x00 << 14)
-#define S3C2410_GPC7_OUTP	(0x01 << 14)
-#define S3C2410_GPC7_LCDVF2	(0x02 << 14)
-#define S3C2400_GPC7_VD7   	(0x02 << 14)
-
-#define S3C2410_GPC8            S3C2410_GPIONO(S3C2410_GPIO_BANKC, 8)
-#define S3C2410_GPC8_INP	(0x00 << 16)
-#define S3C2410_GPC8_OUTP	(0x01 << 16)
-#define S3C2410_GPC8_VD0	(0x02 << 16)
-#define S3C2400_GPC8_VD8	(0x02 << 16)
-
-#define S3C2410_GPC9            S3C2410_GPIONO(S3C2410_GPIO_BANKC, 9)
-#define S3C2410_GPC9_INP	(0x00 << 18)
-#define S3C2410_GPC9_OUTP	(0x01 << 18)
-#define S3C2410_GPC9_VD1	(0x02 << 18)
-#define S3C2400_GPC9_VD9	(0x02 << 18)
-
-#define S3C2410_GPC10           S3C2410_GPIONO(S3C2410_GPIO_BANKC, 10)
-#define S3C2410_GPC10_INP	(0x00 << 20)
-#define S3C2410_GPC10_OUTP	(0x01 << 20)
-#define S3C2410_GPC10_VD2	(0x02 << 20)
-#define S3C2400_GPC10_VD10	(0x02 << 20)
-
-#define S3C2410_GPC11           S3C2410_GPIONO(S3C2410_GPIO_BANKC, 11)
-#define S3C2410_GPC11_INP	(0x00 << 22)
-#define S3C2410_GPC11_OUTP	(0x01 << 22)
-#define S3C2410_GPC11_VD3	(0x02 << 22)
-#define S3C2400_GPC11_VD11	(0x02 << 22)
-
-#define S3C2410_GPC12           S3C2410_GPIONO(S3C2410_GPIO_BANKC, 12)
-#define S3C2410_GPC12_INP	(0x00 << 24)
-#define S3C2410_GPC12_OUTP	(0x01 << 24)
-#define S3C2410_GPC12_VD4	(0x02 << 24)
-#define S3C2400_GPC12_VD12	(0x02 << 24)
-
-#define S3C2410_GPC13           S3C2410_GPIONO(S3C2410_GPIO_BANKC, 13)
-#define S3C2410_GPC13_INP	(0x00 << 26)
-#define S3C2410_GPC13_OUTP	(0x01 << 26)
-#define S3C2410_GPC13_VD5	(0x02 << 26)
-#define S3C2400_GPC13_VD13	(0x02 << 26)
-
-#define S3C2410_GPC14           S3C2410_GPIONO(S3C2410_GPIO_BANKC, 14)
-#define S3C2410_GPC14_INP	(0x00 << 28)
-#define S3C2410_GPC14_OUTP	(0x01 << 28)
-#define S3C2410_GPC14_VD6	(0x02 << 28)
-#define S3C2400_GPC14_VD14	(0x02 << 28)
-
-#define S3C2410_GPC15           S3C2410_GPIONO(S3C2410_GPIO_BANKC, 15)
-#define S3C2410_GPC15_INP	(0x00 << 30)
-#define S3C2410_GPC15_OUTP	(0x01 << 30)
-#define S3C2410_GPC15_VD7	(0x02 << 30)
-#define S3C2400_GPC15_VD15	(0x02 << 30)
-
-#define S3C2410_GPC_PUPDIS(x)  (1<<(x))
-
-/*
- * S3C2410: Port D consists of 16 GPIO/Special function
- *
- * almost identical setup to port b, but the special functions are mostly
- * to do with the video system's data.
- *
- * S3C2400: Port D consists of 11 GPIO/Special function
- *
- * almost identical setup to port c
-*/
-
-#define S3C2410_GPDCON	   S3C2410_GPIOREG(0x30)
-#define S3C2410_GPDDAT	   S3C2410_GPIOREG(0x34)
-#define S3C2410_GPDUP	   S3C2410_GPIOREG(0x38)
-
-#define S3C2400_GPDCON	   S3C2410_GPIOREG(0x20)
-#define S3C2400_GPDDAT	   S3C2410_GPIOREG(0x24)
-#define S3C2400_GPDUP	   S3C2410_GPIOREG(0x28)
-
-#define S3C2410_GPD0            S3C2410_GPIONO(S3C2410_GPIO_BANKD, 0)
-#define S3C2410_GPD0_INP	(0x00 << 0)
-#define S3C2410_GPD0_OUTP	(0x01 << 0)
-#define S3C2410_GPD0_VD8	(0x02 << 0)
-#define S3C2400_GPD0_VFRAME	(0x02 << 0)
-#define S3C2442_GPD0_nSPICS1	(0x03 << 0)
-
-#define S3C2410_GPD1            S3C2410_GPIONO(S3C2410_GPIO_BANKD, 1)
-#define S3C2410_GPD1_INP	(0x00 << 2)
-#define S3C2410_GPD1_OUTP	(0x01 << 2)
-#define S3C2410_GPD1_VD9	(0x02 << 2)
-#define S3C2400_GPD1_VM		(0x02 << 2)
-#define S3C2442_GPD1_SPICLK1	(0x03 << 2)
-
-#define S3C2410_GPD2            S3C2410_GPIONO(S3C2410_GPIO_BANKD, 2)
-#define S3C2410_GPD2_INP	(0x00 << 4)
-#define S3C2410_GPD2_OUTP	(0x01 << 4)
-#define S3C2410_GPD2_VD10	(0x02 << 4)
-#define S3C2400_GPD2_VLINE	(0x02 << 4)
-
-#define S3C2410_GPD3            S3C2410_GPIONO(S3C2410_GPIO_BANKD, 3)
-#define S3C2410_GPD3_INP	(0x00 << 6)
-#define S3C2410_GPD3_OUTP	(0x01 << 6)
-#define S3C2410_GPD3_VD11	(0x02 << 6)
-#define S3C2400_GPD3_VCLK	(0x02 << 6)
-
-#define S3C2410_GPD4            S3C2410_GPIONO(S3C2410_GPIO_BANKD, 4)
-#define S3C2410_GPD4_INP	(0x00 << 8)
-#define S3C2410_GPD4_OUTP	(0x01 << 8)
-#define S3C2410_GPD4_VD12	(0x02 << 8)
-#define S3C2400_GPD4_LEND	(0x02 << 8)
-
-#define S3C2410_GPD5            S3C2410_GPIONO(S3C2410_GPIO_BANKD, 5)
-#define S3C2410_GPD5_INP	(0x00 << 10)
-#define S3C2410_GPD5_OUTP	(0x01 << 10)
-#define S3C2410_GPD5_VD13	(0x02 << 10)
-#define S3C2400_GPD5_TOUT0	(0x02 << 10)
-
-#define S3C2410_GPD6            S3C2410_GPIONO(S3C2410_GPIO_BANKD, 6)
-#define S3C2410_GPD6_INP	(0x00 << 12)
-#define S3C2410_GPD6_OUTP	(0x01 << 12)
-#define S3C2410_GPD6_VD14	(0x02 << 12)
-#define S3C2400_GPD6_TOUT1	(0x02 << 12)
-
-#define S3C2410_GPD7            S3C2410_GPIONO(S3C2410_GPIO_BANKD, 7)
-#define S3C2410_GPD7_INP	(0x00 << 14)
-#define S3C2410_GPD7_OUTP	(0x01 << 14)
-#define S3C2410_GPD7_VD15	(0x02 << 14)
-#define S3C2400_GPD7_TOUT2	(0x02 << 14)
-
-#define S3C2410_GPD8            S3C2410_GPIONO(S3C2410_GPIO_BANKD, 8)
-#define S3C2410_GPD8_INP	(0x00 << 16)
-#define S3C2410_GPD8_OUTP	(0x01 << 16)
-#define S3C2410_GPD8_VD16	(0x02 << 16)
-#define S3C2400_GPD8_TOUT3	(0x02 << 16)
-
-#define S3C2410_GPD9            S3C2410_GPIONO(S3C2410_GPIO_BANKD, 9)
-#define S3C2410_GPD9_INP	(0x00 << 18)
-#define S3C2410_GPD9_OUTP	(0x01 << 18)
-#define S3C2410_GPD9_VD17	(0x02 << 18)
-#define S3C2400_GPD9_TCLK0	(0x02 << 18)
-#define S3C2410_GPD9_MASK       (0x03 << 18)
-
-#define S3C2410_GPD10           S3C2410_GPIONO(S3C2410_GPIO_BANKD, 10)
-#define S3C2410_GPD10_INP	(0x00 << 20)
-#define S3C2410_GPD10_OUTP	(0x01 << 20)
-#define S3C2410_GPD10_VD18	(0x02 << 20)
-#define S3C2400_GPD10_nWAIT	(0x02 << 20)
-
-#define S3C2410_GPD11           S3C2410_GPIONO(S3C2410_GPIO_BANKD, 11)
-#define S3C2410_GPD11_INP	(0x00 << 22)
-#define S3C2410_GPD11_OUTP	(0x01 << 22)
-#define S3C2410_GPD11_VD19	(0x02 << 22)
-
-#define S3C2410_GPD12           S3C2410_GPIONO(S3C2410_GPIO_BANKD, 12)
-#define S3C2410_GPD12_INP	(0x00 << 24)
-#define S3C2410_GPD12_OUTP	(0x01 << 24)
-#define S3C2410_GPD12_VD20	(0x02 << 24)
-
-#define S3C2410_GPD13           S3C2410_GPIONO(S3C2410_GPIO_BANKD, 13)
-#define S3C2410_GPD13_INP	(0x00 << 26)
-#define S3C2410_GPD13_OUTP	(0x01 << 26)
-#define S3C2410_GPD13_VD21	(0x02 << 26)
-
-#define S3C2410_GPD14           S3C2410_GPIONO(S3C2410_GPIO_BANKD, 14)
-#define S3C2410_GPD14_INP	(0x00 << 28)
-#define S3C2410_GPD14_OUTP	(0x01 << 28)
-#define S3C2410_GPD14_VD22	(0x02 << 28)
-#define S3C2410_GPD14_nSS1	(0x03 << 28)
-
-#define S3C2410_GPD15           S3C2410_GPIONO(S3C2410_GPIO_BANKD, 15)
-#define S3C2410_GPD15_INP	(0x00 << 30)
-#define S3C2410_GPD15_OUTP	(0x01 << 30)
-#define S3C2410_GPD15_VD23	(0x02 << 30)
-#define S3C2410_GPD15_nSS0	(0x03 << 30)
-
-#define S3C2410_GPD_PUPDIS(x)  (1<<(x))
-
-/* S3C2410:
- * Port E consists of 16 GPIO/Special function
- *
- * again, the same as port B, but dealing with I2S, SDI, and
- * more miscellaneous functions
- *
- * S3C2400:
- * Port E consists of 12 GPIO/Special function
- *
- * GPIO / interrupt inputs
-*/
-
-#define S3C2410_GPECON	   S3C2410_GPIOREG(0x40)
-#define S3C2410_GPEDAT	   S3C2410_GPIOREG(0x44)
-#define S3C2410_GPEUP	   S3C2410_GPIOREG(0x48)
-
-#define S3C2400_GPECON	   S3C2410_GPIOREG(0x2C)
-#define S3C2400_GPEDAT	   S3C2410_GPIOREG(0x30)
-#define S3C2400_GPEUP	   S3C2410_GPIOREG(0x34)
-
-#define S3C2410_GPE0           S3C2410_GPIONO(S3C2410_GPIO_BANKE, 0)
-#define S3C2410_GPE0_INP       (0x00 << 0)
-#define S3C2410_GPE0_OUTP      (0x01 << 0)
-#define S3C2410_GPE0_I2SLRCK   (0x02 << 0)
-#define S3C2443_GPE0_AC_nRESET (0x03 << 0)
-#define S3C2400_GPE0_EINT0     (0x02 << 0)
-#define S3C2410_GPE0_MASK      (0x03 << 0)
-
-#define S3C2410_GPE1           S3C2410_GPIONO(S3C2410_GPIO_BANKE, 1)
-#define S3C2410_GPE1_INP       (0x00 << 2)
-#define S3C2410_GPE1_OUTP      (0x01 << 2)
-#define S3C2410_GPE1_I2SSCLK   (0x02 << 2)
-#define S3C2443_GPE1_AC_SYNC   (0x03 << 2)
-#define S3C2400_GPE1_EINT1     (0x02 << 2)
-#define S3C2400_GPE1_nSS       (0x03 << 2)
-#define S3C2410_GPE1_MASK      (0x03 << 2)
-
-#define S3C2410_GPE2           S3C2410_GPIONO(S3C2410_GPIO_BANKE, 2)
-#define S3C2410_GPE2_INP       (0x00 << 4)
-#define S3C2410_GPE2_OUTP      (0x01 << 4)
-#define S3C2410_GPE2_CDCLK     (0x02 << 4)
-#define S3C2443_GPE2_AC_BITCLK (0x03 << 4)
-#define S3C2400_GPE2_EINT2     (0x02 << 4)
-#define S3C2400_GPE2_I2SSDI    (0x03 << 4)
-
-#define S3C2410_GPE3           S3C2410_GPIONO(S3C2410_GPIO_BANKE, 3)
-#define S3C2410_GPE3_INP       (0x00 << 6)
-#define S3C2410_GPE3_OUTP      (0x01 << 6)
-#define S3C2410_GPE3_I2SSDI    (0x02 << 6)
-#define S3C2443_GPE3_AC_SDI    (0x03 << 6)
-#define S3C2400_GPE3_EINT3     (0x02 << 6)
-#define S3C2400_GPE3_nCTS1     (0x03 << 6)
-#define S3C2410_GPE3_nSS0      (0x03 << 6)
-#define S3C2410_GPE3_MASK      (0x03 << 6)
-
-#define S3C2410_GPE4           S3C2410_GPIONO(S3C2410_GPIO_BANKE, 4)
-#define S3C2410_GPE4_INP       (0x00 << 8)
-#define S3C2410_GPE4_OUTP      (0x01 << 8)
-#define S3C2410_GPE4_I2SSDO    (0x02 << 8)
-#define S3C2443_GPE4_AC_SDO    (0x03 << 8)
-#define S3C2400_GPE4_EINT4     (0x02 << 8)
-#define S3C2400_GPE4_nRTS1     (0x03 << 8)
-#define S3C2410_GPE4_I2SSDI    (0x03 << 8)
-#define S3C2410_GPE4_MASK      (0x03 << 8)
-
-#define S3C2410_GPE5           S3C2410_GPIONO(S3C2410_GPIO_BANKE, 5)
-#define S3C2410_GPE5_INP       (0x00 << 10)
-#define S3C2410_GPE5_OUTP      (0x01 << 10)
-#define S3C2410_GPE5_SDCLK     (0x02 << 10)
-#define S3C2443_GPE5_SD1_CLK   (0x02 << 10)
-#define S3C2400_GPE5_EINT5     (0x02 << 10)
-#define S3C2400_GPE5_TCLK1     (0x03 << 10)
-
-#define S3C2410_GPE6           S3C2410_GPIONO(S3C2410_GPIO_BANKE, 6)
-#define S3C2410_GPE6_INP       (0x00 << 12)
-#define S3C2410_GPE6_OUTP      (0x01 << 12)
-#define S3C2410_GPE6_SDCMD     (0x02 << 12)
-#define S3C2443_GPE6_SD1_CMD   (0x02 << 12)
-#define S3C2443_GPE6_AC_BITCLK (0x03 << 12)
-#define S3C2400_GPE6_EINT6     (0x02 << 12)
-
-#define S3C2410_GPE7           S3C2410_GPIONO(S3C2410_GPIO_BANKE, 7)
-#define S3C2410_GPE7_INP       (0x00 << 14)
-#define S3C2410_GPE7_OUTP      (0x01 << 14)
-#define S3C2410_GPE7_SDDAT0    (0x02 << 14)
-#define S3C2443_GPE5_SD1_DAT0  (0x02 << 14)
-#define S3C2443_GPE7_AC_SDI    (0x03 << 14)
-#define S3C2400_GPE7_EINT7     (0x02 << 14)
-
-#define S3C2410_GPE8           S3C2410_GPIONO(S3C2410_GPIO_BANKE, 8)
-#define S3C2410_GPE8_INP       (0x00 << 16)
-#define S3C2410_GPE8_OUTP      (0x01 << 16)
-#define S3C2410_GPE8_SDDAT1    (0x02 << 16)
-#define S3C2443_GPE8_SD1_DAT1  (0x02 << 16)
-#define S3C2443_GPE8_AC_SDO    (0x03 << 16)
-#define S3C2400_GPE8_nXDACK0   (0x02 << 16)
-
-#define S3C2410_GPE9           S3C2410_GPIONO(S3C2410_GPIO_BANKE, 9)
-#define S3C2410_GPE9_INP       (0x00 << 18)
-#define S3C2410_GPE9_OUTP      (0x01 << 18)
-#define S3C2410_GPE9_SDDAT2    (0x02 << 18)
-#define S3C2443_GPE9_SD1_DAT2  (0x02 << 18)
-#define S3C2443_GPE9_AC_SYNC   (0x03 << 18)
-#define S3C2400_GPE9_nXDACK1   (0x02 << 18)
-#define S3C2400_GPE9_nXBACK    (0x03 << 18)
-
-#define S3C2410_GPE10          S3C2410_GPIONO(S3C2410_GPIO_BANKE, 10)
-#define S3C2410_GPE10_INP      (0x00 << 20)
-#define S3C2410_GPE10_OUTP     (0x01 << 20)
-#define S3C2410_GPE10_SDDAT3   (0x02 << 20)
-#define S3C2443_GPE10_SD1_DAT3 (0x02 << 20)
-#define S3C2443_GPE10_AC_nRESET (0x03 << 20)
-#define S3C2400_GPE10_nXDREQ0  (0x02 << 20)
-
-#define S3C2410_GPE11          S3C2410_GPIONO(S3C2410_GPIO_BANKE, 11)
-#define S3C2410_GPE11_INP      (0x00 << 22)
-#define S3C2410_GPE11_OUTP     (0x01 << 22)
-#define S3C2410_GPE11_SPIMISO0 (0x02 << 22)
-#define S3C2400_GPE11_nXDREQ1  (0x02 << 22)
-#define S3C2400_GPE11_nXBREQ   (0x03 << 22)
-
-#define S3C2410_GPE12          S3C2410_GPIONO(S3C2410_GPIO_BANKE, 12)
-#define S3C2410_GPE12_INP      (0x00 << 24)
-#define S3C2410_GPE12_OUTP     (0x01 << 24)
-#define S3C2410_GPE12_SPIMOSI0 (0x02 << 24)
-
-#define S3C2410_GPE13          S3C2410_GPIONO(S3C2410_GPIO_BANKE, 13)
-#define S3C2410_GPE13_INP      (0x00 << 26)
-#define S3C2410_GPE13_OUTP     (0x01 << 26)
-#define S3C2410_GPE13_SPICLK0  (0x02 << 26)
-
-#define S3C2410_GPE14          S3C2410_GPIONO(S3C2410_GPIO_BANKE, 14)
-#define S3C2410_GPE14_INP      (0x00 << 28)
-#define S3C2410_GPE14_OUTP     (0x01 << 28)
-#define S3C2410_GPE14_IICSCL   (0x02 << 28)
-#define S3C2410_GPE14_MASK     (0x03 << 28)
-
-#define S3C2410_GPE15          S3C2410_GPIONO(S3C2410_GPIO_BANKE, 15)
-#define S3C2410_GPE15_INP      (0x00 << 30)
-#define S3C2410_GPE15_OUTP     (0x01 << 30)
-#define S3C2410_GPE15_IICSDA   (0x02 << 30)
-#define S3C2410_GPE15_MASK     (0x03 << 30)
-
-#define S3C2440_GPE0_ACSYNC    (0x03 << 0)
-#define S3C2440_GPE1_ACBITCLK  (0x03 << 2)
-#define S3C2440_GPE2_ACRESET   (0x03 << 4)
-#define S3C2440_GPE3_ACIN      (0x03 << 6)
-#define S3C2440_GPE4_ACOUT     (0x03 << 8)
-
-#define S3C2410_GPE_PUPDIS(x)  (1<<(x))
-
-/* S3C2410:
- * Port F consists of 8 GPIO/Special function
- *
- * GPIO / interrupt inputs
- *
- * GPFCON has 2 bits for each of the input pins on port F
- *   00 = 0 input, 1 output, 2 interrupt (EINT0..7), 3 undefined
- *
- * pull up works like all other ports.
- *
- * S3C2400:
- * Port F consists of 7 GPIO/Special function
- *
- * GPIO/serial/misc pins
-*/
-
-#define S3C2410_GPFCON	   S3C2410_GPIOREG(0x50)
-#define S3C2410_GPFDAT	   S3C2410_GPIOREG(0x54)
-#define S3C2410_GPFUP	   S3C2410_GPIOREG(0x58)
-
-#define S3C2400_GPFCON	   S3C2410_GPIOREG(0x38)
-#define S3C2400_GPFDAT	   S3C2410_GPIOREG(0x3C)
-#define S3C2400_GPFUP	   S3C2410_GPIOREG(0x40)
-
-#define S3C2410_GPF0        S3C2410_GPIONO(S3C2410_GPIO_BANKF, 0)
-#define S3C2410_GPF0_INP    (0x00 << 0)
-#define S3C2410_GPF0_OUTP   (0x01 << 0)
-#define S3C2410_GPF0_EINT0  (0x02 << 0)
-#define S3C2400_GPF0_RXD0   (0x02 << 0)
-
-#define S3C2410_GPF1        S3C2410_GPIONO(S3C2410_GPIO_BANKF, 1)
-#define S3C2410_GPF1_INP    (0x00 << 2)
-#define S3C2410_GPF1_OUTP   (0x01 << 2)
-#define S3C2410_GPF1_EINT1  (0x02 << 2)
-#define S3C2400_GPF1_RXD1   (0x02 << 2)
-#define S3C2400_GPF1_IICSDA (0x03 << 2)
-
-#define S3C2410_GPF2        S3C2410_GPIONO(S3C2410_GPIO_BANKF, 2)
-#define S3C2410_GPF2_INP    (0x00 << 4)
-#define S3C2410_GPF2_OUTP   (0x01 << 4)
-#define S3C2410_GPF2_EINT2  (0x02 << 4)
-#define S3C2400_GPF2_TXD0   (0x02 << 4)
-
-#define S3C2410_GPF3        S3C2410_GPIONO(S3C2410_GPIO_BANKF, 3)
-#define S3C2410_GPF3_INP    (0x00 << 6)
-#define S3C2410_GPF3_OUTP   (0x01 << 6)
-#define S3C2410_GPF3_EINT3  (0x02 << 6)
-#define S3C2400_GPF3_TXD1   (0x02 << 6)
-#define S3C2400_GPF3_IICSCL (0x03 << 6)
-
-#define S3C2410_GPF4        S3C2410_GPIONO(S3C2410_GPIO_BANKF, 4)
-#define S3C2410_GPF4_INP    (0x00 << 8)
-#define S3C2410_GPF4_OUTP   (0x01 << 8)
-#define S3C2410_GPF4_EINT4  (0x02 << 8)
-#define S3C2400_GPF4_nRTS0  (0x02 << 8)
-#define S3C2400_GPF4_nXBACK (0x03 << 8)
-
-#define S3C2410_GPF5        S3C2410_GPIONO(S3C2410_GPIO_BANKF, 5)
-#define S3C2410_GPF5_INP    (0x00 << 10)
-#define S3C2410_GPF5_OUTP   (0x01 << 10)
-#define S3C2410_GPF5_EINT5  (0x02 << 10)
-#define S3C2400_GPF5_nCTS0  (0x02 << 10)
-#define S3C2400_GPF5_nXBREQ (0x03 << 10)
-
-#define S3C2410_GPF6        S3C2410_GPIONO(S3C2410_GPIO_BANKF, 6)
-#define S3C2410_GPF6_INP    (0x00 << 12)
-#define S3C2410_GPF6_OUTP   (0x01 << 12)
-#define S3C2410_GPF6_EINT6  (0x02 << 12)
-#define S3C2400_GPF6_CLKOUT (0x02 << 12)
-
-#define S3C2410_GPF7        S3C2410_GPIONO(S3C2410_GPIO_BANKF, 7)
-#define S3C2410_GPF7_INP    (0x00 << 14)
-#define S3C2410_GPF7_OUTP   (0x01 << 14)
-#define S3C2410_GPF7_EINT7  (0x02 << 14)
-
-#define S3C2410_GPF_PUPDIS(x)  (1<<(x))
-
-/* S3C2410:
- * Port G consists of 8 GPIO/IRQ/Special function
- *
- * GPGCON has 2 bits for each of the input pins on port F
- *   00 = 0 input, 1 output, 2 interrupt (EINT0..7), 3 special func
- *
- * pull up works like all other ports.
- *
- * S3C2400:
- * Port G consists of 10 GPIO/Special function
-*/
-
-#define S3C2410_GPGCON	   S3C2410_GPIOREG(0x60)
-#define S3C2410_GPGDAT	   S3C2410_GPIOREG(0x64)
-#define S3C2410_GPGUP	   S3C2410_GPIOREG(0x68)
-
-#define S3C2400_GPGCON	   S3C2410_GPIOREG(0x44)
-#define S3C2400_GPGDAT	   S3C2410_GPIOREG(0x48)
-#define S3C2400_GPGUP	   S3C2410_GPIOREG(0x4C)
-
-#define S3C2410_GPG0          S3C2410_GPIONO(S3C2410_GPIO_BANKG, 0)
-#define S3C2410_GPG0_INP      (0x00 << 0)
-#define S3C2410_GPG0_OUTP     (0x01 << 0)
-#define S3C2410_GPG0_EINT8    (0x02 << 0)
-#define S3C2400_GPG0_I2SLRCK  (0x02 << 0)
-
-#define S3C2410_GPG1          S3C2410_GPIONO(S3C2410_GPIO_BANKG, 1)
-#define S3C2410_GPG1_INP      (0x00 << 2)
-#define S3C2410_GPG1_OUTP     (0x01 << 2)
-#define S3C2410_GPG1_EINT9    (0x02 << 2)
-#define S3C2400_GPG1_I2SSCLK  (0x02 << 2)
-
-#define S3C2410_GPG2          S3C2410_GPIONO(S3C2410_GPIO_BANKG, 2)
-#define S3C2410_GPG2_INP      (0x00 << 4)
-#define S3C2410_GPG2_OUTP     (0x01 << 4)
-#define S3C2410_GPG2_EINT10   (0x02 << 4)
-#define S3C2410_GPG2_nSS0     (0x03 << 4)
-#define S3C2400_GPG2_CDCLK    (0x02 << 4)
-
-#define S3C2410_GPG3          S3C2410_GPIONO(S3C2410_GPIO_BANKG, 3)
-#define S3C2410_GPG3_INP      (0x00 << 6)
-#define S3C2410_GPG3_OUTP     (0x01 << 6)
-#define S3C2410_GPG3_EINT11   (0x02 << 6)
-#define S3C2410_GPG3_nSS1     (0x03 << 6)
-#define S3C2400_GPG3_I2SSDO   (0x02 << 6)
-#define S3C2400_GPG3_I2SSDI   (0x03 << 6)
-
-#define S3C2410_GPG4          S3C2410_GPIONO(S3C2410_GPIO_BANKG, 4)
-#define S3C2410_GPG4_INP      (0x00 << 8)
-#define S3C2410_GPG4_OUTP     (0x01 << 8)
-#define S3C2410_GPG4_EINT12   (0x02 << 8)
-#define S3C2400_GPG4_MMCCLK   (0x02 << 8)
-#define S3C2400_GPG4_I2SSDI   (0x03 << 8)
-#define S3C2410_GPG4_LCDPWREN (0x03 << 8)
-#define S3C2443_GPG4_LCDPWRDN (0x03 << 8)
-
-#define S3C2410_GPG5          S3C2410_GPIONO(S3C2410_GPIO_BANKG, 5)
-#define S3C2410_GPG5_INP      (0x00 << 10)
-#define S3C2410_GPG5_OUTP     (0x01 << 10)
-#define S3C2410_GPG5_EINT13   (0x02 << 10)
-#define S3C2400_GPG5_MMCCMD   (0x02 << 10)
-#define S3C2400_GPG5_IICSDA   (0x03 << 10)
-#define S3C2410_GPG5_SPIMISO1 (0x03 << 10)	/* not s3c2443 */
-
-#define S3C2410_GPG6          S3C2410_GPIONO(S3C2410_GPIO_BANKG, 6)
-#define S3C2410_GPG6_INP      (0x00 << 12)
-#define S3C2410_GPG6_OUTP     (0x01 << 12)
-#define S3C2410_GPG6_EINT14   (0x02 << 12)
-#define S3C2400_GPG6_MMCDAT   (0x02 << 12)
-#define S3C2400_GPG6_IICSCL   (0x03 << 12)
-#define S3C2410_GPG6_SPIMOSI1 (0x03 << 12)
-
-#define S3C2410_GPG7          S3C2410_GPIONO(S3C2410_GPIO_BANKG, 7)
-#define S3C2410_GPG7_INP      (0x00 << 14)
-#define S3C2410_GPG7_OUTP     (0x01 << 14)
-#define S3C2410_GPG7_EINT15   (0x02 << 14)
-#define S3C2410_GPG7_SPICLK1  (0x03 << 14)
-#define S3C2400_GPG7_SPIMISO  (0x02 << 14)
-#define S3C2400_GPG7_IICSDA   (0x03 << 14)
-
-#define S3C2410_GPG8          S3C2410_GPIONO(S3C2410_GPIO_BANKG, 8)
-#define S3C2410_GPG8_INP      (0x00 << 16)
-#define S3C2410_GPG8_OUTP     (0x01 << 16)
-#define S3C2410_GPG8_EINT16   (0x02 << 16)
-#define S3C2400_GPG8_SPIMOSI  (0x02 << 16)
-#define S3C2400_GPG8_IICSCL   (0x03 << 16)
-
-#define S3C2410_GPG9          S3C2410_GPIONO(S3C2410_GPIO_BANKG, 9)
-#define S3C2410_GPG9_INP      (0x00 << 18)
-#define S3C2410_GPG9_OUTP     (0x01 << 18)
-#define S3C2410_GPG9_EINT17   (0x02 << 18)
-#define S3C2400_GPG9_SPICLK   (0x02 << 18)
-#define S3C2400_GPG9_MMCCLK   (0x03 << 18)
-
-#define S3C2410_GPG10         S3C2410_GPIONO(S3C2410_GPIO_BANKG, 10)
-#define S3C2410_GPG10_INP     (0x00 << 20)
-#define S3C2410_GPG10_OUTP    (0x01 << 20)
-#define S3C2410_GPG10_EINT18  (0x02 << 20)
-
-#define S3C2410_GPG11         S3C2410_GPIONO(S3C2410_GPIO_BANKG, 11)
-#define S3C2410_GPG11_INP     (0x00 << 22)
-#define S3C2410_GPG11_OUTP    (0x01 << 22)
-#define S3C2410_GPG11_EINT19  (0x02 << 22)
-#define S3C2410_GPG11_TCLK1   (0x03 << 22)
-#define S3C2443_GPG11_CF_nIREQ (0x03 << 22)
-
-#define S3C2410_GPG12         S3C2410_GPIONO(S3C2410_GPIO_BANKG, 12)
-#define S3C2410_GPG12_INP     (0x00 << 24)
-#define S3C2410_GPG12_OUTP    (0x01 << 24)
-#define S3C2410_GPG12_EINT20  (0x02 << 24)
-#define S3C2410_GPG12_XMON    (0x03 << 24)
-#define S3C2442_GPG12_nSPICS0 (0x03 << 24)
-#define S3C2443_GPG12_nINPACK (0x03 << 24)
-
-#define S3C2410_GPG13         S3C2410_GPIONO(S3C2410_GPIO_BANKG, 13)
-#define S3C2410_GPG13_INP     (0x00 << 26)
-#define S3C2410_GPG13_OUTP    (0x01 << 26)
-#define S3C2410_GPG13_EINT21  (0x02 << 26)
-#define S3C2410_GPG13_nXPON   (0x03 << 26)
-#define S3C2443_GPG13_CF_nREG (0x03 << 26)
-
-#define S3C2410_GPG14         S3C2410_GPIONO(S3C2410_GPIO_BANKG, 14)
-#define S3C2410_GPG14_INP     (0x00 << 28)
-#define S3C2410_GPG14_OUTP    (0x01 << 28)
-#define S3C2410_GPG14_EINT22  (0x02 << 28)
-#define S3C2410_GPG14_YMON    (0x03 << 28)
-#define S3C2443_GPG14_CF_RESET (0x03 << 28)
-
-#define S3C2410_GPG15         S3C2410_GPIONO(S3C2410_GPIO_BANKG, 15)
-#define S3C2410_GPG15_INP     (0x00 << 30)
-#define S3C2410_GPG15_OUTP    (0x01 << 30)
-#define S3C2410_GPG15_EINT23  (0x02 << 30)
-#define S3C2410_GPG15_nYPON   (0x03 << 30)
-#define S3C2443_GPG15_CF_PWR  (0x03 << 30)
-
-#define S3C2410_GPG_PUPDIS(x)  (1<<(x))
-
-/* Port H consists of11 GPIO/serial/Misc pins
- *
- * GPGCON has 2 bits for each of the input pins on port F
- *   00 = 0 input, 1 output, 2 interrupt (EINT0..7), 3 special func
- *
- * pull up works like all other ports.
-*/
-
-#define S3C2410_GPHCON	   S3C2410_GPIOREG(0x70)
-#define S3C2410_GPHDAT	   S3C2410_GPIOREG(0x74)
-#define S3C2410_GPHUP	   S3C2410_GPIOREG(0x78)
-
-#define S3C2410_GPH0        S3C2410_GPIONO(S3C2410_GPIO_BANKH, 0)
-#define S3C2410_GPH0_INP    (0x00 << 0)
-#define S3C2410_GPH0_OUTP   (0x01 << 0)
-#define S3C2410_GPH0_nCTS0  (0x02 << 0)
-
-#define S3C2410_GPH1        S3C2410_GPIONO(S3C2410_GPIO_BANKH, 1)
-#define S3C2410_GPH1_INP    (0x00 << 2)
-#define S3C2410_GPH1_OUTP   (0x01 << 2)
-#define S3C2410_GPH1_nRTS0  (0x02 << 2)
-
-#define S3C2410_GPH2        S3C2410_GPIONO(S3C2410_GPIO_BANKH, 2)
-#define S3C2410_GPH2_INP    (0x00 << 4)
-#define S3C2410_GPH2_OUTP   (0x01 << 4)
-#define S3C2410_GPH2_TXD0   (0x02 << 4)
-
-#define S3C2410_GPH3        S3C2410_GPIONO(S3C2410_GPIO_BANKH, 3)
-#define S3C2410_GPH3_INP    (0x00 << 6)
-#define S3C2410_GPH3_OUTP   (0x01 << 6)
-#define S3C2410_GPH3_RXD0   (0x02 << 6)
-
-#define S3C2410_GPH4        S3C2410_GPIONO(S3C2410_GPIO_BANKH, 4)
-#define S3C2410_GPH4_INP    (0x00 << 8)
-#define S3C2410_GPH4_OUTP   (0x01 << 8)
-#define S3C2410_GPH4_TXD1   (0x02 << 8)
-
-#define S3C2410_GPH5        S3C2410_GPIONO(S3C2410_GPIO_BANKH, 5)
-#define S3C2410_GPH5_INP    (0x00 << 10)
-#define S3C2410_GPH5_OUTP   (0x01 << 10)
-#define S3C2410_GPH5_RXD1   (0x02 << 10)
-
-#define S3C2410_GPH6        S3C2410_GPIONO(S3C2410_GPIO_BANKH, 6)
-#define S3C2410_GPH6_INP    (0x00 << 12)
-#define S3C2410_GPH6_OUTP   (0x01 << 12)
-#define S3C2410_GPH6_TXD2   (0x02 << 12)
-#define S3C2410_GPH6_nRTS1  (0x03 << 12)
-
-#define S3C2410_GPH7        S3C2410_GPIONO(S3C2410_GPIO_BANKH, 7)
-#define S3C2410_GPH7_INP    (0x00 << 14)
-#define S3C2410_GPH7_OUTP   (0x01 << 14)
-#define S3C2410_GPH7_RXD2   (0x02 << 14)
-#define S3C2410_GPH7_nCTS1  (0x03 << 14)
-
-#define S3C2410_GPH8        S3C2410_GPIONO(S3C2410_GPIO_BANKH, 8)
-#define S3C2410_GPH8_INP    (0x00 << 16)
-#define S3C2410_GPH8_OUTP   (0x01 << 16)
-#define S3C2410_GPH8_UCLK   (0x02 << 16)
-
-#define S3C2410_GPH9          S3C2410_GPIONO(S3C2410_GPIO_BANKH, 9)
-#define S3C2410_GPH9_INP      (0x00 << 18)
-#define S3C2410_GPH9_OUTP     (0x01 << 18)
-#define S3C2410_GPH9_CLKOUT0  (0x02 << 18)
-#define S3C2442_GPH9_nSPICS0  (0x03 << 18)
-
-#define S3C2410_GPH10         S3C2410_GPIONO(S3C2410_GPIO_BANKH, 10)
-#define S3C2410_GPH10_INP     (0x00 << 20)
-#define S3C2410_GPH10_OUTP    (0x01 << 20)
-#define S3C2410_GPH10_CLKOUT1 (0x02 << 20)
-
-/* The S3C2412 and S3C2413 move the GPJ register set to after
- * GPH, which means all registers after 0x80 are now offset by 0x10
- * for the 2412/2413 from the 2410/2440/2442
-*/
-
-/* miscellaneous control */
-#define S3C2400_MISCCR	   S3C2410_GPIOREG(0x54)
-#define S3C2410_MISCCR	   S3C2410_GPIOREG(0x80)
-#define S3C2410_DCLKCON	   S3C2410_GPIOREG(0x84)
-
-#define S3C24XX_DCLKCON	   S3C24XX_GPIOREG2(0x84)
-
-/* see clock.h for dclk definitions */
-
-/* pullup control on databus */
-#define S3C2410_MISCCR_SPUCR_HEN    (0<<0)
-#define S3C2410_MISCCR_SPUCR_HDIS   (1<<0)
-#define S3C2410_MISCCR_SPUCR_LEN    (0<<1)
-#define S3C2410_MISCCR_SPUCR_LDIS   (1<<1)
-
-#define S3C2400_MISCCR_SPUCR_LEN    (0<<0)
-#define S3C2400_MISCCR_SPUCR_LDIS   (1<<0)
-#define S3C2400_MISCCR_SPUCR_HEN    (0<<1)
-#define S3C2400_MISCCR_SPUCR_HDIS   (1<<1)
-
-#define S3C2400_MISCCR_HZ_STOPEN    (0<<2)
-#define S3C2400_MISCCR_HZ_STOPPREV  (1<<2)
-
-#define S3C2410_MISCCR_USBDEV	    (0<<3)
-#define S3C2410_MISCCR_USBHOST	    (1<<3)
-
-#define S3C2410_MISCCR_CLK0_MPLL    (0<<4)
-#define S3C2410_MISCCR_CLK0_UPLL    (1<<4)
-#define S3C2410_MISCCR_CLK0_FCLK    (2<<4)
-#define S3C2410_MISCCR_CLK0_HCLK    (3<<4)
-#define S3C2410_MISCCR_CLK0_PCLK    (4<<4)
-#define S3C2410_MISCCR_CLK0_DCLK0   (5<<4)
-#define S3C2410_MISCCR_CLK0_MASK    (7<<4)
-
-#define S3C2412_MISCCR_CLK0_RTC	    (2<<4)
-
-#define S3C2410_MISCCR_CLK1_MPLL    (0<<8)
-#define S3C2410_MISCCR_CLK1_UPLL    (1<<8)
-#define S3C2410_MISCCR_CLK1_FCLK    (2<<8)
-#define S3C2410_MISCCR_CLK1_HCLK    (3<<8)
-#define S3C2410_MISCCR_CLK1_PCLK    (4<<8)
-#define S3C2410_MISCCR_CLK1_DCLK1   (5<<8)
-#define S3C2410_MISCCR_CLK1_MASK    (7<<8)
-
-#define S3C2412_MISCCR_CLK1_CLKsrc  (0<<8)
-
-#define S3C2410_MISCCR_USBSUSPND0   (1<<12)
-#define S3C2410_MISCCR_USBSUSPND1   (1<<13)
-
-#define S3C2410_MISCCR_nRSTCON	    (1<<16)
-
-#define S3C2410_MISCCR_nEN_SCLK0    (1<<17)
-#define S3C2410_MISCCR_nEN_SCLK1    (1<<18)
-#define S3C2410_MISCCR_nEN_SCLKE    (1<<19)	/* not 2412 */
-#define S3C2410_MISCCR_SDSLEEP	    (7<<17)
-
-/* external interrupt control... */
-/* S3C2410_EXTINT0 -> irq sense control for EINT0..EINT7
- * S3C2410_EXTINT1 -> irq sense control for EINT8..EINT15
- * S3C2410_EXTINT2 -> irq sense control for EINT16..EINT23
- *
- * note S3C2410_EXTINT2 has filtering options for EINT16..EINT23
- *
- * Samsung datasheet p9-25
-*/
-#define S3C2400_EXTINT0    S3C2410_GPIOREG(0x58)
-#define S3C2410_EXTINT0	   S3C2410_GPIOREG(0x88)
-#define S3C2410_EXTINT1	   S3C2410_GPIOREG(0x8C)
-#define S3C2410_EXTINT2	   S3C2410_GPIOREG(0x90)
-
-#define S3C24XX_EXTINT0	   S3C24XX_GPIOREG2(0x88)
-#define S3C24XX_EXTINT1	   S3C24XX_GPIOREG2(0x8C)
-#define S3C24XX_EXTINT2	   S3C24XX_GPIOREG2(0x90)
-
-/* values for S3C2410_EXTINT0/1/2 */
-#define S3C2410_EXTINT_LOWLEV	 (0x00)
-#define S3C2410_EXTINT_HILEV	 (0x01)
-#define S3C2410_EXTINT_FALLEDGE	 (0x02)
-#define S3C2410_EXTINT_RISEEDGE	 (0x04)
-#define S3C2410_EXTINT_BOTHEDGE	 (0x06)
-
-/* interrupt filtering conrrol for EINT16..EINT23 */
-#define S3C2410_EINFLT0	   S3C2410_GPIOREG(0x94)
-#define S3C2410_EINFLT1	   S3C2410_GPIOREG(0x98)
-#define S3C2410_EINFLT2	   S3C2410_GPIOREG(0x9C)
-#define S3C2410_EINFLT3	   S3C2410_GPIOREG(0xA0)
-
-#define S3C24XX_EINFLT0	   S3C24XX_GPIOREG2(0x94)
-#define S3C24XX_EINFLT1	   S3C24XX_GPIOREG2(0x98)
-#define S3C24XX_EINFLT2	   S3C24XX_GPIOREG2(0x9C)
-#define S3C24XX_EINFLT3	   S3C24XX_GPIOREG2(0xA0)
-
-/* values for interrupt filtering */
-#define S3C2410_EINTFLT_PCLK		(0x00)
-#define S3C2410_EINTFLT_EXTCLK		(1<<7)
-#define S3C2410_EINTFLT_WIDTHMSK(x)	((x) & 0x3f)
-
-/* removed EINTxxxx defs from here, not meant for this */
-
-/* GSTATUS have miscellaneous information in them
- *
- * These move between s3c2410 and s3c2412 style systems.
- */
-
-#define S3C2410_GSTATUS0   S3C2410_GPIOREG(0x0AC)
-#define S3C2410_GSTATUS1   S3C2410_GPIOREG(0x0B0)
-#define S3C2410_GSTATUS2   S3C2410_GPIOREG(0x0B4)
-#define S3C2410_GSTATUS3   S3C2410_GPIOREG(0x0B8)
-#define S3C2410_GSTATUS4   S3C2410_GPIOREG(0x0BC)
-
-#define S3C2412_GSTATUS0   S3C2410_GPIOREG(0x0BC)
-#define S3C2412_GSTATUS1   S3C2410_GPIOREG(0x0C0)
-#define S3C2412_GSTATUS2   S3C2410_GPIOREG(0x0C4)
-#define S3C2412_GSTATUS3   S3C2410_GPIOREG(0x0C8)
-#define S3C2412_GSTATUS4   S3C2410_GPIOREG(0x0CC)
-
-#define S3C24XX_GSTATUS0   S3C24XX_GPIOREG2(0x0AC)
-#define S3C24XX_GSTATUS1   S3C24XX_GPIOREG2(0x0B0)
-#define S3C24XX_GSTATUS2   S3C24XX_GPIOREG2(0x0B4)
-#define S3C24XX_GSTATUS3   S3C24XX_GPIOREG2(0x0B8)
-#define S3C24XX_GSTATUS4   S3C24XX_GPIOREG2(0x0BC)
-
-#define S3C2410_GSTATUS0_nWAIT	   (1<<3)
-#define S3C2410_GSTATUS0_NCON	   (1<<2)
-#define S3C2410_GSTATUS0_RnB	   (1<<1)
-#define S3C2410_GSTATUS0_nBATTFLT  (1<<0)
-
-#define S3C2410_GSTATUS1_IDMASK	   (0xffff0000)
-#define S3C2410_GSTATUS1_2410	   (0x32410000)
-#define S3C2410_GSTATUS1_2412	   (0x32412001)
-#define S3C2410_GSTATUS1_2440	   (0x32440000)
-#define S3C2410_GSTATUS1_2442	   (0x32440aaa)
-
-#define S3C2410_GSTATUS2_WTRESET   (1<<2)
-#define S3C2410_GSTATUS2_OFFRESET  (1<<1)
-#define S3C2410_GSTATUS2_PONRESET  (1<<0)
-
-/* open drain control register */
-#define S3C2400_OPENCR     S3C2410_GPIOREG(0x50)
-
-#define S3C2400_OPENCR_OPC_RXD1DIS  (0<<0)
-#define S3C2400_OPENCR_OPC_RXD1EN   (1<<0)
-#define S3C2400_OPENCR_OPC_TXD1DIS  (0<<1)
-#define S3C2400_OPENCR_OPC_TXD1EN   (1<<1)
-#define S3C2400_OPENCR_OPC_CMDDIS   (0<<2)
-#define S3C2400_OPENCR_OPC_CMDEN    (1<<2)
-#define S3C2400_OPENCR_OPC_DATDIS   (0<<3)
-#define S3C2400_OPENCR_OPC_DATEN    (1<<3)
-#define S3C2400_OPENCR_OPC_MISODIS  (0<<4)
-#define S3C2400_OPENCR_OPC_MISOEN   (1<<4)
-#define S3C2400_OPENCR_OPC_MOSIDIS  (0<<5)
-#define S3C2400_OPENCR_OPC_MOSIEN   (1<<5)
-
-/* 2412/2413 sleep configuration registers */
-
-#define S3C2412_GPBSLPCON	S3C2410_GPIOREG(0x1C)
-#define S3C2412_GPCSLPCON	S3C2410_GPIOREG(0x2C)
-#define S3C2412_GPDSLPCON	S3C2410_GPIOREG(0x3C)
-#define S3C2412_GPFSLPCON	S3C2410_GPIOREG(0x5C)
-#define S3C2412_GPGSLPCON	S3C2410_GPIOREG(0x6C)
-#define S3C2412_GPHSLPCON	S3C2410_GPIOREG(0x7C)
-
-/* definitions for each pin bit */
-#define S3C2412_GPIO_SLPCON_LOW	 ( 0x00 )
-#define S3C2412_GPIO_SLPCON_HIGH ( 0x01 )
-#define S3C2412_GPIO_SLPCON_IN   ( 0x02 )
-#define S3C2412_GPIO_SLPCON_PULL ( 0x03 )
-
-#define S3C2412_SLPCON_LOW(x)	( 0x00 << ((x) * 2))
-#define S3C2412_SLPCON_HIGH(x)	( 0x01 << ((x) * 2))
-#define S3C2412_SLPCON_IN(x)	( 0x02 << ((x) * 2))
-#define S3C2412_SLPCON_PULL(x)	( 0x03 << ((x) * 2))
-#define S3C2412_SLPCON_EINT(x)	( 0x02 << ((x) * 2))  /* only IRQ pins */
-#define S3C2412_SLPCON_MASK(x)	( 0x03 << ((x) * 2))
-
-#define S3C2412_SLPCON_ALL_LOW	(0x0)
-#define S3C2412_SLPCON_ALL_HIGH	(0x11111111 | 0x44444444)
-#define S3C2412_SLPCON_ALL_IN  	(0x22222222 | 0x88888888)
-#define S3C2412_SLPCON_ALL_PULL	(0x33333333)
-
-#endif	/* __ASM_ARCH_REGS_GPIO_H */
-
diff --git a/include/asm-arm/arch-s3c2410/regs-irq.h b/include/asm-arm/arch-s3c2410/regs-irq.h
deleted file mode 100644
index 498184cb8adc..000000000000
--- a/include/asm-arm/arch-s3c2410/regs-irq.h
+++ /dev/null
@@ -1,43 +0,0 @@
-/* linux/include/asm-arm/arch-s3c2410/regs-irq.h
- *
- * Copyright (c) 2003 Simtec Electronics <linux@simtec.co.uk>
- *		      http://www.simtec.co.uk/products/SWLINUX/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-
-#ifndef ___ASM_ARCH_REGS_IRQ_H
-#define ___ASM_ARCH_REGS_IRQ_H "$Id: irq.h,v 1.3 2003/03/25 21:29:06 ben Exp $"
-
-/* interrupt controller */
-
-#define S3C2410_IRQREG(x)   ((x) + S3C24XX_VA_IRQ)
-#define S3C2410_EINTREG(x)  ((x) + S3C24XX_VA_GPIO)
-#define S3C24XX_EINTREG(x)  ((x) + S3C24XX_VA_GPIO2)
-
-#define S3C2410_SRCPND	       S3C2410_IRQREG(0x000)
-#define S3C2410_INTMOD	       S3C2410_IRQREG(0x004)
-#define S3C2410_INTMSK	       S3C2410_IRQREG(0x008)
-#define S3C2410_PRIORITY       S3C2410_IRQREG(0x00C)
-#define S3C2410_INTPND	       S3C2410_IRQREG(0x010)
-#define S3C2410_INTOFFSET      S3C2410_IRQREG(0x014)
-#define S3C2410_SUBSRCPND      S3C2410_IRQREG(0x018)
-#define S3C2410_INTSUBMSK      S3C2410_IRQREG(0x01C)
-
-/* mask: 0=enable, 1=disable
- * 1 bit EINT, 4=EINT4, 23=EINT23
- * EINT0,1,2,3 are not handled here.
-*/
-
-#define S3C2410_EINTMASK       S3C2410_EINTREG(0x0A4)
-#define S3C2410_EINTPEND       S3C2410_EINTREG(0X0A8)
-#define S3C2412_EINTMASK       S3C2410_EINTREG(0x0B4)
-#define S3C2412_EINTPEND       S3C2410_EINTREG(0X0B8)
-
-#define S3C24XX_EINTMASK       S3C24XX_EINTREG(0x0A4)
-#define S3C24XX_EINTPEND       S3C24XX_EINTREG(0X0A8)
-
-#endif /* ___ASM_ARCH_REGS_IRQ_H */
diff --git a/include/asm-arm/arch-s3c2410/regs-lcd.h b/include/asm-arm/arch-s3c2410/regs-lcd.h
deleted file mode 100644
index bd854845697f..000000000000
--- a/include/asm-arm/arch-s3c2410/regs-lcd.h
+++ /dev/null
@@ -1,162 +0,0 @@
-/* linux/include/asm-arm/arch-s3c2410/regs-lcd.h
- *
- * Copyright (c) 2003 Simtec Electronics <linux@simtec.co.uk>
- *		      http://www.simtec.co.uk/products/SWLINUX/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-
-#ifndef ___ASM_ARCH_REGS_LCD_H
-#define ___ASM_ARCH_REGS_LCD_H "$Id: lcd.h,v 1.3 2003/06/26 13:25:06 ben Exp $"
-
-#define S3C2410_LCDREG(x)	(x)
-
-/* LCD control registers */
-#define S3C2410_LCDCON1	    S3C2410_LCDREG(0x00)
-#define S3C2410_LCDCON2	    S3C2410_LCDREG(0x04)
-#define S3C2410_LCDCON3	    S3C2410_LCDREG(0x08)
-#define S3C2410_LCDCON4	    S3C2410_LCDREG(0x0C)
-#define S3C2410_LCDCON5	    S3C2410_LCDREG(0x10)
-
-#define S3C2410_LCDCON1_CLKVAL(x)  ((x) << 8)
-#define S3C2410_LCDCON1_MMODE	   (1<<7)
-#define S3C2410_LCDCON1_DSCAN4	   (0<<5)
-#define S3C2410_LCDCON1_STN4	   (1<<5)
-#define S3C2410_LCDCON1_STN8	   (2<<5)
-#define S3C2410_LCDCON1_TFT	   (3<<5)
-
-#define S3C2410_LCDCON1_STN1BPP	   (0<<1)
-#define S3C2410_LCDCON1_STN2GREY   (1<<1)
-#define S3C2410_LCDCON1_STN4GREY   (2<<1)
-#define S3C2410_LCDCON1_STN8BPP	   (3<<1)
-#define S3C2410_LCDCON1_STN12BPP   (4<<1)
-
-#define S3C2410_LCDCON1_TFT1BPP	   (8<<1)
-#define S3C2410_LCDCON1_TFT2BPP	   (9<<1)
-#define S3C2410_LCDCON1_TFT4BPP	   (10<<1)
-#define S3C2410_LCDCON1_TFT8BPP	   (11<<1)
-#define S3C2410_LCDCON1_TFT16BPP   (12<<1)
-#define S3C2410_LCDCON1_TFT24BPP   (13<<1)
-
-#define S3C2410_LCDCON1_ENVID	   (1)
-
-#define S3C2410_LCDCON1_MODEMASK    0x1E
-
-#define S3C2410_LCDCON2_VBPD(x)	    ((x) << 24)
-#define S3C2410_LCDCON2_LINEVAL(x)  ((x) << 14)
-#define S3C2410_LCDCON2_VFPD(x)	    ((x) << 6)
-#define S3C2410_LCDCON2_VSPW(x)	    ((x) << 0)
-
-#define S3C2410_LCDCON2_GET_VBPD(x) ( ((x) >> 24) & 0xFF)
-#define S3C2410_LCDCON2_GET_VFPD(x) ( ((x) >>  6) & 0xFF)
-#define S3C2410_LCDCON2_GET_VSPW(x) ( ((x) >>  0) & 0x3F)
-
-#define S3C2410_LCDCON3_HBPD(x)	    ((x) << 19)
-#define S3C2410_LCDCON3_WDLY(x)	    ((x) << 19)
-#define S3C2410_LCDCON3_HOZVAL(x)   ((x) << 8)
-#define S3C2410_LCDCON3_HFPD(x)	    ((x) << 0)
-#define S3C2410_LCDCON3_LINEBLANK(x)((x) << 0)
-
-#define S3C2410_LCDCON3_GET_HBPD(x) ( ((x) >> 19) & 0x7F)
-#define S3C2410_LCDCON3_GET_HFPD(x) ( ((x) >>  0) & 0xFF)
-
-/* LDCCON4 changes for STN mode on the S3C2412 */
-
-#define S3C2410_LCDCON4_MVAL(x)	    ((x) << 8)
-#define S3C2410_LCDCON4_HSPW(x)	    ((x) << 0)
-#define S3C2410_LCDCON4_WLH(x)	    ((x) << 0)
-
-#define S3C2410_LCDCON4_GET_HSPW(x) ( ((x) >>  0) & 0xFF)
-
-#define S3C2410_LCDCON5_BPP24BL	    (1<<12)
-#define S3C2410_LCDCON5_FRM565	    (1<<11)
-#define S3C2410_LCDCON5_INVVCLK	    (1<<10)
-#define S3C2410_LCDCON5_INVVLINE    (1<<9)
-#define S3C2410_LCDCON5_INVVFRAME   (1<<8)
-#define S3C2410_LCDCON5_INVVD	    (1<<7)
-#define S3C2410_LCDCON5_INVVDEN	    (1<<6)
-#define S3C2410_LCDCON5_INVPWREN    (1<<5)
-#define S3C2410_LCDCON5_INVLEND	    (1<<4)
-#define S3C2410_LCDCON5_PWREN	    (1<<3)
-#define S3C2410_LCDCON5_ENLEND	    (1<<2)
-#define S3C2410_LCDCON5_BSWP	    (1<<1)
-#define S3C2410_LCDCON5_HWSWP	    (1<<0)
-
-/* framebuffer start addressed */
-#define S3C2410_LCDSADDR1   S3C2410_LCDREG(0x14)
-#define S3C2410_LCDSADDR2   S3C2410_LCDREG(0x18)
-#define S3C2410_LCDSADDR3   S3C2410_LCDREG(0x1C)
-
-#define S3C2410_LCDBANK(x)	((x) << 21)
-#define S3C2410_LCDBASEU(x)	(x)
-
-#define S3C2410_OFFSIZE(x)	((x) << 11)
-#define S3C2410_PAGEWIDTH(x)	(x)
-
-/* colour lookup and miscellaneous controls */
-
-#define S3C2410_REDLUT	   S3C2410_LCDREG(0x20)
-#define S3C2410_GREENLUT   S3C2410_LCDREG(0x24)
-#define S3C2410_BLUELUT	   S3C2410_LCDREG(0x28)
-
-#define S3C2410_DITHMODE   S3C2410_LCDREG(0x4C)
-#define S3C2410_TPAL	   S3C2410_LCDREG(0x50)
-
-#define S3C2410_TPAL_EN		(1<<24)
-
-/* interrupt info */
-#define S3C2410_LCDINTPND  S3C2410_LCDREG(0x54)
-#define S3C2410_LCDSRCPND  S3C2410_LCDREG(0x58)
-#define S3C2410_LCDINTMSK  S3C2410_LCDREG(0x5C)
-#define S3C2410_LCDINT_FIWSEL	(1<<2)
-#define	S3C2410_LCDINT_FRSYNC	(1<<1)
-#define S3C2410_LCDINT_FICNT	(1<<0)
-
-/* s3c2442 extra stn registers */
-
-#define S3C2442_REDLUT		S3C2410_LCDREG(0x20)
-#define S3C2442_GREENLUT	S3C2410_LCDREG(0x24)
-#define S3C2442_BLUELUT		S3C2410_LCDREG(0x28)
-#define S3C2442_DITHMODE	S3C2410_LCDREG(0x20)
-
-#define S3C2410_LPCSEL	   S3C2410_LCDREG(0x60)
-
-#define S3C2410_TFTPAL(x)  S3C2410_LCDREG((0x400 + (x)*4))
-
-/* S3C2412 registers */
-
-#define S3C2412_TPAL		S3C2410_LCDREG(0x20)
-
-#define S3C2412_LCDINTPND	S3C2410_LCDREG(0x24)
-#define S3C2412_LCDSRCPND	S3C2410_LCDREG(0x28)
-#define S3C2412_LCDINTMSK	S3C2410_LCDREG(0x2C)
-
-#define S3C2412_TCONSEL		S3C2410_LCDREG(0x30)
-
-#define S3C2412_LCDCON6		S3C2410_LCDREG(0x34)
-#define S3C2412_LCDCON7		S3C2410_LCDREG(0x38)
-#define S3C2412_LCDCON8		S3C2410_LCDREG(0x3C)
-#define S3C2412_LCDCON9		S3C2410_LCDREG(0x40)
-
-#define S3C2412_REDLUT(x)	S3C2410_LCDREG(0x44 + ((x)*4))
-#define S3C2412_GREENLUT(x)	S3C2410_LCDREG(0x60 + ((x)*4))
-#define S3C2412_BLUELUT(x)	S3C2410_LCDREG(0x98 + ((x)*4))
-
-#define S3C2412_FRCPAT(x)	S3C2410_LCDREG(0xB4 + ((x)*4))
-
-/* general registers */
-
-/* base of the LCD registers, where INTPND, INTSRC and then INTMSK
- * are available. */
-
-#define S3C2410_LCDINTBASE	S3C2410_LCDREG(0x54)
-#define S3C2412_LCDINTBASE	S3C2410_LCDREG(0x24)
-
-#define S3C24XX_LCDINTPND	(0x00)
-#define S3C24XX_LCDSRCPND	(0x04)
-#define S3C24XX_LCDINTMSK	(0x08)
-
-#endif /* ___ASM_ARCH_REGS_LCD_H */
diff --git a/include/asm-arm/arch-s3c2410/regs-mem.h b/include/asm-arm/arch-s3c2410/regs-mem.h
deleted file mode 100644
index 312ff93b63c6..000000000000
--- a/include/asm-arm/arch-s3c2410/regs-mem.h
+++ /dev/null
@@ -1,220 +0,0 @@
-/* linux/include/asm-arm/arch-s3c2410/regs-mem.h
- *
- * Copyright (c) 2004 Simtec Electronics <linux@simtec.co.uk>
- *		http://www.simtec.co.uk/products/SWLINUX/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * S3C2410 Memory Control register definitions
-*/
-
-#ifndef __ASM_ARM_MEMREGS_H
-#define __ASM_ARM_MEMREGS_H "$Id: regs.h,v 1.8 2003/05/01 15:55:41 ben Exp $"
-
-#ifndef S3C2410_MEMREG
-#define S3C2410_MEMREG(x) (S3C24XX_VA_MEMCTRL + (x))
-#endif
-
-/* bus width, and wait state control */
-#define S3C2410_BWSCON			S3C2410_MEMREG(0x0000)
-
-/* bank zero config - note, pinstrapped from OM pins! */
-#define S3C2410_BWSCON_DW0_16		(1<<1)
-#define S3C2410_BWSCON_DW0_32		(2<<1)
-
-/* bank one configs */
-#define S3C2410_BWSCON_DW1_8		(0<<4)
-#define S3C2410_BWSCON_DW1_16		(1<<4)
-#define S3C2410_BWSCON_DW1_32		(2<<4)
-#define S3C2410_BWSCON_WS1		(1<<6)
-#define S3C2410_BWSCON_ST1		(1<<7)
-
-/* bank 2 configurations */
-#define S3C2410_BWSCON_DW2_8		(0<<8)
-#define S3C2410_BWSCON_DW2_16		(1<<8)
-#define S3C2410_BWSCON_DW2_32		(2<<8)
-#define S3C2410_BWSCON_WS2		(1<<10)
-#define S3C2410_BWSCON_ST2		(1<<11)
-
-/* bank 3 configurations */
-#define S3C2410_BWSCON_DW3_8		(0<<12)
-#define S3C2410_BWSCON_DW3_16		(1<<12)
-#define S3C2410_BWSCON_DW3_32		(2<<12)
-#define S3C2410_BWSCON_WS3		(1<<14)
-#define S3C2410_BWSCON_ST3		(1<<15)
-
-/* bank 4 configurations */
-#define S3C2410_BWSCON_DW4_8		(0<<16)
-#define S3C2410_BWSCON_DW4_16		(1<<16)
-#define S3C2410_BWSCON_DW4_32		(2<<16)
-#define S3C2410_BWSCON_WS4		(1<<18)
-#define S3C2410_BWSCON_ST4		(1<<19)
-
-/* bank 5 configurations */
-#define S3C2410_BWSCON_DW5_8		(0<<20)
-#define S3C2410_BWSCON_DW5_16		(1<<20)
-#define S3C2410_BWSCON_DW5_32		(2<<20)
-#define S3C2410_BWSCON_WS5		(1<<22)
-#define S3C2410_BWSCON_ST5		(1<<23)
-
-/* bank 6 configurations */
-#define S3C2410_BWSCON_DW6_8		(0<<24)
-#define S3C2410_BWSCON_DW6_16		(1<<24)
-#define S3C2410_BWSCON_DW6_32		(2<<24)
-#define S3C2410_BWSCON_WS6		(1<<26)
-#define S3C2410_BWSCON_ST6		(1<<27)
-
-/* bank 7 configurations */
-#define S3C2410_BWSCON_DW7_8		(0<<28)
-#define S3C2410_BWSCON_DW7_16		(1<<28)
-#define S3C2410_BWSCON_DW7_32		(2<<28)
-#define S3C2410_BWSCON_WS7		(1<<30)
-#define S3C2410_BWSCON_ST7		(1<<31)
-
-/* memory set (rom, ram) */
-#define S3C2410_BANKCON0		S3C2410_MEMREG(0x0004)
-#define S3C2410_BANKCON1		S3C2410_MEMREG(0x0008)
-#define S3C2410_BANKCON2		S3C2410_MEMREG(0x000C)
-#define S3C2410_BANKCON3		S3C2410_MEMREG(0x0010)
-#define S3C2410_BANKCON4		S3C2410_MEMREG(0x0014)
-#define S3C2410_BANKCON5		S3C2410_MEMREG(0x0018)
-#define S3C2410_BANKCON6		S3C2410_MEMREG(0x001C)
-#define S3C2410_BANKCON7		S3C2410_MEMREG(0x0020)
-
-/* bank configuration registers */
-
-#define S3C2410_BANKCON_PMCnorm		(0x00)
-#define S3C2410_BANKCON_PMC4		(0x01)
-#define S3C2410_BANKCON_PMC8		(0x02)
-#define S3C2410_BANKCON_PMC16		(0x03)
-
-/* bank configurations for banks 0..7, note banks
- * 6 and 7 have differnt configurations depending on
- * the memory type bits */
-
-#define S3C2410_BANKCON_Tacp2		(0x0 << 2)
-#define S3C2410_BANKCON_Tacp3		(0x1 << 2)
-#define S3C2410_BANKCON_Tacp4		(0x2 << 2)
-#define S3C2410_BANKCON_Tacp6		(0x3 << 2)
-#define S3C2410_BANKCON_Tacp_SHIFT	(2)
-
-#define S3C2410_BANKCON_Tcah0		(0x0 << 4)
-#define S3C2410_BANKCON_Tcah1		(0x1 << 4)
-#define S3C2410_BANKCON_Tcah2		(0x2 << 4)
-#define S3C2410_BANKCON_Tcah4		(0x3 << 4)
-#define S3C2410_BANKCON_Tcah_SHIFT	(4)
-
-#define S3C2410_BANKCON_Tcoh0		(0x0 << 6)
-#define S3C2410_BANKCON_Tcoh1		(0x1 << 6)
-#define S3C2410_BANKCON_Tcoh2		(0x2 << 6)
-#define S3C2410_BANKCON_Tcoh4		(0x3 << 6)
-#define S3C2410_BANKCON_Tcoh_SHIFT	(6)
-
-#define S3C2410_BANKCON_Tacc1		(0x0 << 8)
-#define S3C2410_BANKCON_Tacc2		(0x1 << 8)
-#define S3C2410_BANKCON_Tacc3		(0x2 << 8)
-#define S3C2410_BANKCON_Tacc4		(0x3 << 8)
-#define S3C2410_BANKCON_Tacc6		(0x4 << 8)
-#define S3C2410_BANKCON_Tacc8		(0x5 << 8)
-#define S3C2410_BANKCON_Tacc10		(0x6 << 8)
-#define S3C2410_BANKCON_Tacc14		(0x7 << 8)
-#define S3C2410_BANKCON_Tacc_SHIFT	(8)
-
-#define S3C2410_BANKCON_Tcos0		(0x0 << 11)
-#define S3C2410_BANKCON_Tcos1		(0x1 << 11)
-#define S3C2410_BANKCON_Tcos2		(0x2 << 11)
-#define S3C2410_BANKCON_Tcos4		(0x3 << 11)
-#define S3C2410_BANKCON_Tcos_SHIFT	(11)
-
-#define S3C2410_BANKCON_Tacs0		(0x0 << 13)
-#define S3C2410_BANKCON_Tacs1		(0x1 << 13)
-#define S3C2410_BANKCON_Tacs2		(0x2 << 13)
-#define S3C2410_BANKCON_Tacs4		(0x3 << 13)
-#define S3C2410_BANKCON_Tacs_SHIFT	(13)
-
-#define S3C2410_BANKCON_SRAM		(0x0 << 15)
-#define S3C2400_BANKCON_EDODRAM		(0x2 << 15)
-#define S3C2410_BANKCON_SDRAM		(0x3 << 15)
-
-/* next bits only for EDO DRAM in 6,7 */
-#define S3C2400_BANKCON_EDO_Trcd1      (0x00 << 4)
-#define S3C2400_BANKCON_EDO_Trcd2      (0x01 << 4)
-#define S3C2400_BANKCON_EDO_Trcd3      (0x02 << 4)
-#define S3C2400_BANKCON_EDO_Trcd4      (0x03 << 4)
-
-/* CAS pulse width */
-#define S3C2400_BANKCON_EDO_PULSE1     (0x00 << 3)
-#define S3C2400_BANKCON_EDO_PULSE2     (0x01 << 3)
-
-/* CAS pre-charge */
-#define S3C2400_BANKCON_EDO_TCP1       (0x00 << 2)
-#define S3C2400_BANKCON_EDO_TCP2       (0x01 << 2)
-
-/* control column address select */
-#define S3C2400_BANKCON_EDO_SCANb8     (0x00 << 0)
-#define S3C2400_BANKCON_EDO_SCANb9     (0x01 << 0)
-#define S3C2400_BANKCON_EDO_SCANb10    (0x02 << 0)
-#define S3C2400_BANKCON_EDO_SCANb11    (0x03 << 0)
-
-/* next bits only for SDRAM in 6,7 */
-#define S3C2410_BANKCON_Trcd2		(0x00 << 2)
-#define S3C2410_BANKCON_Trcd3		(0x01 << 2)
-#define S3C2410_BANKCON_Trcd4		(0x02 << 2)
-
-/* control column address select */
-#define S3C2410_BANKCON_SCANb8		(0x00 << 0)
-#define S3C2410_BANKCON_SCANb9		(0x01 << 0)
-#define S3C2410_BANKCON_SCANb10		(0x02 << 0)
-
-#define S3C2410_REFRESH			S3C2410_MEMREG(0x0024)
-#define S3C2410_BANKSIZE		S3C2410_MEMREG(0x0028)
-#define S3C2410_MRSRB6			S3C2410_MEMREG(0x002C)
-#define S3C2410_MRSRB7			S3C2410_MEMREG(0x0030)
-
-/* refresh control */
-
-#define S3C2410_REFRESH_REFEN		(1<<23)
-#define S3C2410_REFRESH_SELF		(1<<22)
-#define S3C2410_REFRESH_REFCOUNTER	((1<<11)-1)
-
-#define S3C2410_REFRESH_TRP_MASK	(3<<20)
-#define S3C2410_REFRESH_TRP_2clk	(0<<20)
-#define S3C2410_REFRESH_TRP_3clk	(1<<20)
-#define S3C2410_REFRESH_TRP_4clk	(2<<20)
-
-#define S3C2400_REFRESH_DRAM_TRP_MASK   (3<<20)
-#define S3C2400_REFRESH_DRAM_TRP_1_5clk (0<<20)
-#define S3C2400_REFRESH_DRAM_TRP_2_5clk (1<<20)
-#define S3C2400_REFRESH_DRAM_TRP_3_5clk (2<<20)
-#define S3C2400_REFRESH_DRAM_TRP_4_5clk (3<<20)
-
-#define S3C2410_REFRESH_TSRC_MASK	(3<<18)
-#define S3C2410_REFRESH_TSRC_4clk	(0<<18)
-#define S3C2410_REFRESH_TSRC_5clk	(1<<18)
-#define S3C2410_REFRESH_TSRC_6clk	(2<<18)
-#define S3C2410_REFRESH_TSRC_7clk	(3<<18)
-
-
-/* mode select register(s) */
-
-#define  S3C2410_MRSRB_CL1		(0x00 << 4)
-#define  S3C2410_MRSRB_CL2		(0x02 << 4)
-#define  S3C2410_MRSRB_CL3		(0x03 << 4)
-
-/* bank size register */
-#define S3C2410_BANKSIZE_128M		(0x2 << 0)
-#define S3C2410_BANKSIZE_64M		(0x1 << 0)
-#define S3C2410_BANKSIZE_32M		(0x0 << 0)
-#define S3C2410_BANKSIZE_16M		(0x7 << 0)
-#define S3C2410_BANKSIZE_8M		(0x6 << 0)
-#define S3C2410_BANKSIZE_4M		(0x5 << 0)
-#define S3C2410_BANKSIZE_2M		(0x4 << 0)
-#define S3C2410_BANKSIZE_MASK		(0x7 << 0)
-#define S3C2400_BANKSIZE_MASK           (0x4 << 0)
-#define S3C2410_BANKSIZE_SCLK_EN	(1<<4)
-#define S3C2410_BANKSIZE_SCKE_EN	(1<<5)
-#define S3C2410_BANKSIZE_BURST		(1<<7)
-
-#endif /* __ASM_ARM_MEMREGS_H */
diff --git a/include/asm-arm/arch-s3c2410/reset.h b/include/asm-arm/arch-s3c2410/reset.h
deleted file mode 100644
index 4f866cdecab0..000000000000
--- a/include/asm-arm/arch-s3c2410/reset.h
+++ /dev/null
@@ -1,22 +0,0 @@
-/* linux/include/asm-arm/arch-s3c2410/reset.h
- *
- * Copyright (c) 2007 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *	http://armlinux.simtec.co.uk/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * S3C2410 CPU reset controls
-*/
-
-#ifndef __ASM_ARCH_RESET_H
-#define __ASM_ARCH_RESET_H __FILE__
-
-/* This allows the over-ride of the default reset code
-*/
-
-extern void (*s3c24xx_reset_hook)(void);
-
-#endif /* __ASM_ARCH_RESET_H */
diff --git a/include/asm-arm/arch-s3c2410/system.h b/include/asm-arm/arch-s3c2410/system.h
deleted file mode 100644
index ad258085e53b..000000000000
--- a/include/asm-arm/arch-s3c2410/system.h
+++ /dev/null
@@ -1,58 +0,0 @@
-/* linux/include/asm-arm/arch-s3c2410/system.h
- *
- * Copyright (c) 2003 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * S3C2410 - System function defines and includes
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <asm/hardware.h>
-#include <asm/io.h>
-
-#include <asm/arch/map.h>
-#include <asm/arch/idle.h>
-#include <asm/arch/reset.h>
-
-#include <asm/arch/regs-clock.h>
-
-void (*s3c24xx_idle)(void);
-void (*s3c24xx_reset_hook)(void);
-
-void s3c24xx_default_idle(void)
-{
-	unsigned long tmp;
-	int i;
-
-	/* idle the system by using the idle mode which will wait for an
-	 * interrupt to happen before restarting the system.
-	 */
-
-	/* Warning: going into idle state upsets jtag scanning */
-
-	__raw_writel(__raw_readl(S3C2410_CLKCON) | S3C2410_CLKCON_IDLE,
-		     S3C2410_CLKCON);
-
-	/* the samsung port seems to do a loop and then unset idle.. */
-	for (i = 0; i < 50; i++) {
-		tmp += __raw_readl(S3C2410_CLKCON); /* ensure loop not optimised out */
-	}
-
-	/* this bit is not cleared on re-start... */
-
-	__raw_writel(__raw_readl(S3C2410_CLKCON) & ~S3C2410_CLKCON_IDLE,
-		     S3C2410_CLKCON);
-}
-
-static void arch_idle(void)
-{
-	if (s3c24xx_idle != NULL)
-		(s3c24xx_idle)();
-	else
-		s3c24xx_default_idle();
-}
-
-#include <asm/arch/system-reset.h>
diff --git a/include/asm-arm/arch-s3c2410/timex.h b/include/asm-arm/arch-s3c2410/timex.h
deleted file mode 100644
index c16a99c5a59a..000000000000
--- a/include/asm-arm/arch-s3c2410/timex.h
+++ /dev/null
@@ -1,26 +0,0 @@
-/* linux/include/asm-arm/arch-s3c2410/timex.h
- *
- * Copyright (c) 2003-2005 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * S3C2410 - time parameters
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_TIMEX_H
-#define __ASM_ARCH_TIMEX_H
-
-/* CLOCK_TICK_RATE needs to be evaluatable by the cpp, so making it
- * a variable is useless. It seems as long as we make our timers an
- * exact multiple of HZ, any value that makes a 1->1 correspondence
- * for the time conversion functions to/from jiffies is acceptable.
-*/
-
-
-#define CLOCK_TICK_RATE 12000000
-
-
-#endif /* __ASM_ARCH_TIMEX_H */
diff --git a/include/asm-arm/arch-s3c2410/uncompress.h b/include/asm-arm/arch-s3c2410/uncompress.h
deleted file mode 100644
index 48a5731ee988..000000000000
--- a/include/asm-arm/arch-s3c2410/uncompress.h
+++ /dev/null
@@ -1,52 +0,0 @@
-/* linux/include/asm-arm/arch-s3c2410/uncompress.h
- *
- * Copyright (c) 2003, 2007 Simtec Electronics
- *	http://armlinux.simtec.co.uk/
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * S3C2410 - uncompress code
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_UNCOMPRESS_H
-#define __ASM_ARCH_UNCOMPRESS_H
-
-#include <asm/arch/regs-gpio.h>
-#include <asm/arch/map.h>
-
-/* working in physical space... */
-#undef S3C2410_GPIOREG
-#define S3C2410_GPIOREG(x) ((S3C24XX_PA_GPIO + (x)))
-
-#include <asm/plat-s3c/uncompress.h>
-
-static inline int is_arm926(void)
-{
-	unsigned int cpuid;
-
-	asm volatile ("mrc p15, 0, %0, c1, c0, 0" : "=r" (cpuid));
-
-	return ((cpuid & 0xff0) == 0x260);
-}
-
-static void arch_detect_cpu(void)
-{
-	unsigned int cpuid;
-
-	cpuid = *((volatile unsigned int *)S3C2410_GSTATUS1);
-	cpuid &= S3C2410_GSTATUS1_IDMASK;
-
-	if (is_arm926() || cpuid == S3C2410_GSTATUS1_2440 ||
-	    cpuid == S3C2410_GSTATUS1_2442) {
-		fifo_mask = S3C2440_UFSTAT_TXMASK;
-		fifo_max = 63 << S3C2440_UFSTAT_TXSHIFT;
-	} else {
-		fifo_mask = S3C2410_UFSTAT_TXMASK;
-		fifo_max = 15 << S3C2410_UFSTAT_TXSHIFT;
-	}
-}
-
-#endif /* __ASM_ARCH_UNCOMPRESS_H */
diff --git a/include/asm-arm/arch-s3c2410/vmalloc.h b/include/asm-arm/arch-s3c2410/vmalloc.h
deleted file mode 100644
index 0ae3bdb7e03b..000000000000
--- a/include/asm-arm/arch-s3c2410/vmalloc.h
+++ /dev/null
@@ -1,20 +0,0 @@
-/* linux/include/asm-arm/arch-s3c2410/vmalloc.h
- *
- * from linux/include/asm-arm/arch-iop3xx/vmalloc.h
- *
- * Copyright (c) 2003 Simtec Electronics <linux@simtec.co.uk>
- *		      http://www.simtec.co.uk/products/SWLINUX/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * S3C2410 vmalloc definition
-*/
-
-#ifndef __ASM_ARCH_VMALLOC_H
-#define __ASM_ARCH_VMALLOC_H
-
-#define VMALLOC_END	  (0xE0000000)
-
-#endif /* __ASM_ARCH_VMALLOC_H */
diff --git a/include/asm-arm/arch-sa1100/debug-macro.S b/include/asm-arm/arch-sa1100/debug-macro.S
deleted file mode 100644
index 267c317a7408..000000000000
--- a/include/asm-arm/arch-sa1100/debug-macro.S
+++ /dev/null
@@ -1,58 +0,0 @@
-/* linux/include/asm-arm/arch-sa1100/debug-macro.S
- *
- * Debugging macro include header
- *
- *  Copyright (C) 1994-1999 Russell King
- *  Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
-*/
-#include <asm/hardware.h>
-
-		.macro	addruart,rx
-		mrc	p15, 0, \rx, c1, c0
-		tst	\rx, #1			@ MMU enabled?
-		moveq	\rx, #0x80000000	@ physical base address
-		movne	\rx, #0xf8000000	@ virtual address
-
-		@ We probe for the active serial port here, coherently with
-		@ the comment in include/asm-arm/arch-sa1100/uncompress.h.
-		@ We assume r1 can be clobbered.
-
-		@ see if Ser3 is active
-		add	\rx, \rx, #0x00050000
-		ldr	r1, [\rx, #UTCR3]
-		tst	r1, #UTCR3_TXE
-
-		@ if Ser3 is inactive, then try Ser1
-		addeq	\rx, \rx, #(0x00010000 - 0x00050000)
-		ldreq	r1, [\rx, #UTCR3]
-		tsteq	r1, #UTCR3_TXE
-
-		@ if Ser1 is inactive, then try Ser2
-		addeq	\rx, \rx, #(0x00030000 - 0x00010000)
-		ldreq	r1, [\rx, #UTCR3]
-		tsteq	r1, #UTCR3_TXE
-
-		@ if all ports are inactive, then there is nothing we can do
-		moveq	pc, lr
-		.endm
-
-		.macro	senduart,rd,rx
-		str	\rd, [\rx, #UTDR]
-		.endm
-
-		.macro	waituart,rd,rx
-1001:		ldr	\rd, [\rx, #UTSR1]
-		tst	\rd, #UTSR1_TNF
-		beq	1001b
-		.endm
-
-		.macro	busyuart,rd,rx
-1001:		ldr	\rd, [\rx, #UTSR1]
-		tst	\rd, #UTSR1_TBY
-		bne	1001b
-		.endm
diff --git a/include/asm-arm/arch-sa1100/dma.h b/include/asm-arm/arch-sa1100/dma.h
deleted file mode 100644
index 6b7917a2e77a..000000000000
--- a/include/asm-arm/arch-sa1100/dma.h
+++ /dev/null
@@ -1,117 +0,0 @@
-/*
- * linux/include/asm-arm/arch-sa1100/dma.h
- *
- * Generic SA1100 DMA support
- *
- * Copyright (C) 2000 Nicolas Pitre
- *
- */
-
-#ifndef __ASM_ARCH_DMA_H
-#define __ASM_ARCH_DMA_H
-
-#include "hardware.h"
-
-
-/*
- * The SA1100 has six internal DMA channels.
- */
-#define SA1100_DMA_CHANNELS	6
-
-/*
- * Maximum physical DMA buffer size
- */
-#define MAX_DMA_SIZE		0x1fff
-#define CUT_DMA_SIZE		0x1000
-
-/*
- * All possible SA1100 devices a DMA channel can be attached to.
- */
-typedef enum {
-	DMA_Ser0UDCWr  = DDAR_Ser0UDCWr,   /* Ser. port 0 UDC Write */
-	DMA_Ser0UDCRd  = DDAR_Ser0UDCRd,   /* Ser. port 0 UDC Read */
-	DMA_Ser1UARTWr = DDAR_Ser1UARTWr,  /* Ser. port 1 UART Write */
-	DMA_Ser1UARTRd = DDAR_Ser1UARTRd,  /* Ser. port 1 UART Read */
-	DMA_Ser1SDLCWr = DDAR_Ser1SDLCWr,  /* Ser. port 1 SDLC Write */
-	DMA_Ser1SDLCRd = DDAR_Ser1SDLCRd,  /* Ser. port 1 SDLC Read */
-	DMA_Ser2UARTWr = DDAR_Ser2UARTWr,  /* Ser. port 2 UART Write */
-	DMA_Ser2UARTRd = DDAR_Ser2UARTRd,  /* Ser. port 2 UART Read */
-	DMA_Ser2HSSPWr = DDAR_Ser2HSSPWr,  /* Ser. port 2 HSSP Write */
-	DMA_Ser2HSSPRd = DDAR_Ser2HSSPRd,  /* Ser. port 2 HSSP Read */
-	DMA_Ser3UARTWr = DDAR_Ser3UARTWr,  /* Ser. port 3 UART Write */
-	DMA_Ser3UARTRd = DDAR_Ser3UARTRd,  /* Ser. port 3 UART Read */
-	DMA_Ser4MCP0Wr = DDAR_Ser4MCP0Wr,  /* Ser. port 4 MCP 0 Write (audio) */
-	DMA_Ser4MCP0Rd = DDAR_Ser4MCP0Rd,  /* Ser. port 4 MCP 0 Read (audio) */
-	DMA_Ser4MCP1Wr = DDAR_Ser4MCP1Wr,  /* Ser. port 4 MCP 1 Write */
-	DMA_Ser4MCP1Rd = DDAR_Ser4MCP1Rd,  /* Ser. port 4 MCP 1 Read */
-	DMA_Ser4SSPWr  = DDAR_Ser4SSPWr,   /* Ser. port 4 SSP Write (16 bits) */
-	DMA_Ser4SSPRd  = DDAR_Ser4SSPRd    /* Ser. port 4 SSP Read (16 bits) */
-} dma_device_t;
-
-typedef struct {
-	volatile u_long DDAR;
-	volatile u_long SetDCSR;
-	volatile u_long ClrDCSR;
-	volatile u_long RdDCSR;
-	volatile dma_addr_t DBSA;
-	volatile u_long DBTA;
-	volatile dma_addr_t DBSB;
-	volatile u_long DBTB;
-} dma_regs_t;
-
-typedef void (*dma_callback_t)(void *data);
-
-/*
- * DMA function prototypes
- */
-
-extern int sa1100_request_dma( dma_device_t device, const char *device_id,
-			       dma_callback_t callback, void *data,
-			       dma_regs_t **regs );
-extern void sa1100_free_dma( dma_regs_t *regs );
-extern int sa1100_start_dma( dma_regs_t *regs, dma_addr_t dma_ptr, u_int size );
-extern dma_addr_t sa1100_get_dma_pos(dma_regs_t *regs);
-extern void sa1100_reset_dma(dma_regs_t *regs);
-
-/**
- * 	sa1100_stop_dma - stop DMA in progress
- * 	@regs: identifier for the channel to use
- *
- * 	This stops DMA without clearing buffer pointers. Unlike
- * 	sa1100_clear_dma() this allows subsequent use of sa1100_resume_dma()
- * 	or sa1100_get_dma_pos().
- *
- * 	The @regs identifier is provided by a successful call to
- * 	sa1100_request_dma().
- **/
-
-#define sa1100_stop_dma(regs)	((regs)->ClrDCSR = DCSR_IE|DCSR_RUN)
-
-/**
- * 	sa1100_resume_dma - resume DMA on a stopped channel
- * 	@regs: identifier for the channel to use
- *
- * 	This resumes DMA on a channel previously stopped with
- * 	sa1100_stop_dma().
- *
- * 	The @regs identifier is provided by a successful call to
- * 	sa1100_request_dma().
- **/
-
-#define sa1100_resume_dma(regs)	((regs)->SetDCSR = DCSR_IE|DCSR_RUN)
-
-/**
- * 	sa1100_clear_dma - clear DMA pointers
- * 	@regs: identifier for the channel to use
- *
- * 	This clear any DMA state so the DMA engine is ready to restart
- * 	with new buffers through sa1100_start_dma(). Any buffers in flight
- * 	are discarded.
- *
- * 	The @regs identifier is provided by a successful call to
- * 	sa1100_request_dma().
- **/
-
-#define sa1100_clear_dma(regs)	((regs)->ClrDCSR = DCSR_IE|DCSR_RUN|DCSR_STRTA|DCSR_STRTB)
-
-#endif /* _ASM_ARCH_DMA_H */
diff --git a/include/asm-arm/arch-sa1100/entry-macro.S b/include/asm-arm/arch-sa1100/entry-macro.S
deleted file mode 100644
index 127db4aaf4f2..000000000000
--- a/include/asm-arm/arch-sa1100/entry-macro.S
+++ /dev/null
@@ -1,47 +0,0 @@
-/*
- * include/asm-arm/arch-sa1100/entry-macro.S
- *
- * Low-level IRQ helper macros for SA1100-based platforms
- *
- * This file is licensed under  the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
- 		.macro	disable_fiq
-		.endm
-
-		.macro  get_irqnr_preamble, base, tmp
-		mov	\base, #0xfa000000		@ ICIP = 0xfa050000
-		add	\base, \base, #0x00050000
-		.endm
-
-		.macro  arch_ret_to_user, tmp1, tmp2
-		.endm
-
-		.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
-		ldr	\irqstat, [\base]		@ get irqs
-		ldr	\irqnr, [\base, #4]		@ ICMR = 0xfa050004
-		ands	\irqstat, \irqstat, \irqnr
-		mov	\irqnr, #0
-		beq	1001f
-		tst	\irqstat, #0xff
-		moveq	\irqstat, \irqstat, lsr #8
-		addeq	\irqnr, \irqnr, #8
-		tsteq	\irqstat, #0xff
-		moveq	\irqstat, \irqstat, lsr #8
-		addeq	\irqnr, \irqnr, #8
-		tsteq	\irqstat, #0xff
-		moveq	\irqstat, \irqstat, lsr #8
-		addeq	\irqnr, \irqnr, #8
-		tst	\irqstat, #0x0f
-		moveq	\irqstat, \irqstat, lsr #4
-		addeq	\irqnr, \irqnr, #4
-		tst	\irqstat, #0x03
-		moveq	\irqstat, \irqstat, lsr #2
-		addeq	\irqnr, \irqnr, #2
-		tst	\irqstat, #0x01
-		addeqs	\irqnr, \irqnr, #1
-1001:
-		.endm
-
diff --git a/include/asm-arm/arch-sa1100/gpio.h b/include/asm-arm/arch-sa1100/gpio.h
deleted file mode 100644
index 93d3395b102d..000000000000
--- a/include/asm-arm/arch-sa1100/gpio.h
+++ /dev/null
@@ -1,68 +0,0 @@
-/*
- * linux/include/asm-arm/arch-sa1100/gpio.h
- *
- * SA1100 GPIO wrappers for arch-neutral GPIO calls
- *
- * Written by Philipp Zabel <philipp.zabel@gmail.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- *
- */
-
-#ifndef __ASM_ARCH_SA1100_GPIO_H
-#define __ASM_ARCH_SA1100_GPIO_H
-
-#include <asm/hardware.h>
-#include <asm/irq.h>
-#include <asm-generic/gpio.h>
-
-static inline int gpio_get_value(unsigned gpio)
-{
-	if (__builtin_constant_p(gpio) && (gpio <= GPIO_MAX))
-		return GPLR & GPIO_GPIO(gpio);
-	else
-		return __gpio_get_value(gpio);
-}
-
-static inline void gpio_set_value(unsigned gpio, int value)
-{
-	if (__builtin_constant_p(gpio) && (gpio <= GPIO_MAX))
-		if (value)
-			GPSR = GPIO_GPIO(gpio);
-		else
-			GPCR = GPIO_GPIO(gpio);
-	else
-		__gpio_set_value(gpio, value);
-}
-
-#define gpio_cansleep	__gpio_cansleep
-
-static inline unsigned gpio_to_irq(unsigned gpio)
-{
-	if (gpio < 11)
-		return IRQ_GPIO0 + gpio;
-	else
-		return IRQ_GPIO11 - 11 + gpio;
-}
-
-static inline unsigned irq_to_gpio(unsigned irq)
-{
-	if (irq < IRQ_GPIO11_27)
-		return irq - IRQ_GPIO0;
-	else
-		return irq - IRQ_GPIO11 + 11;
-}
-
-#endif
diff --git a/include/asm-arm/arch-sa1100/hardware.h b/include/asm-arm/arch-sa1100/hardware.h
deleted file mode 100644
index 1abd7cfc8bce..000000000000
--- a/include/asm-arm/arch-sa1100/hardware.h
+++ /dev/null
@@ -1,57 +0,0 @@
-/*
- * linux/include/asm-arm/arch-sa1100/hardware.h
- *
- * Copyright (C) 1998 Nicolas Pitre <nico@cam.org>
- *
- * This file contains the hardware definitions for SA1100 architecture
- *
- * 2000/05/23 John Dorsey <john+@cs.cmu.edu>
- *      Definitions for SA1111 added.
- */
-
-#ifndef __ASM_ARCH_HARDWARE_H
-#define __ASM_ARCH_HARDWARE_H
-
-
-#define UNCACHEABLE_ADDR	0xfa050000
-
-
-/*
- * SA1100 internal I/O mappings
- *
- * We have the following mapping:
- *      phys            virt
- *      80000000        f8000000
- *      90000000        fa000000
- *      a0000000        fc000000
- *      b0000000        fe000000
- */
-
-#define VIO_BASE        0xf8000000	/* virtual start of IO space */
-#define VIO_SHIFT       3		/* x = IO space shrink power */
-#define PIO_START       0x80000000	/* physical start of IO space */
-
-#define io_p2v( x )             \
-   ( (((x)&0x00ffffff) | (((x)&0x30000000)>>VIO_SHIFT)) + VIO_BASE )
-#define io_v2p( x )             \
-   ( (((x)&0x00ffffff) | (((x)&(0x30000000>>VIO_SHIFT))<<VIO_SHIFT)) + PIO_START )
-
-#ifndef __ASSEMBLY__
-
-# define __REG(x)	(*((volatile unsigned long *)io_p2v(x)))
-# define __PREG(x)	(io_v2p((unsigned long)&(x)))
-
-#else
-
-# define __REG(x)	io_p2v(x)
-# define __PREG(x)	io_v2p(x)
-
-#endif
-
-#include "SA-1100.h"
-
-#ifdef CONFIG_SA1101
-#include "SA-1101.h"
-#endif
-
-#endif  /* _ASM_ARCH_HARDWARE_H */
diff --git a/include/asm-arm/arch-sa1100/ide.h b/include/asm-arm/arch-sa1100/ide.h
deleted file mode 100644
index b14cbda01dc3..000000000000
--- a/include/asm-arm/arch-sa1100/ide.h
+++ /dev/null
@@ -1,75 +0,0 @@
-/*
- * linux/include/asm-arm/arch-sa1100/ide.h
- *
- * Copyright (c) 1998 Hugo Fiennes & Nicolas Pitre
- *
- * 18-aug-2000: Cleanup by Erik Mouw (J.A.K.Mouw@its.tudelft.nl)
- *              Get rid of the special ide_init_hwif_ports() functions
- *              and make a generalised function that can be used by all
- *              architectures.
- */
-
-#include <asm/irq.h>
-#include <asm/hardware.h>
-#include <asm/mach-types.h>
-
-#error "This code is broken and needs update to match with current ide support"
-
-
-/*
- * Set up a hw structure for a specified data port, control port and IRQ.
- * This should follow whatever the default interface uses.
- */
-static inline void ide_init_hwif_ports(hw_regs_t *hw, unsigned long data_port,
-				       unsigned long ctrl_port, int *irq)
-{
-	unsigned long reg = data_port;
-	int i;
-	int regincr = 1;
-
-	/* The Empeg board has the first two address lines unused */
-	if (machine_is_empeg())
-		regincr = 1 << 2;
-
-	/* The LART doesn't use A0 for IDE */
-	if (machine_is_lart())
-		regincr = 1 << 1;
-
-	memset(hw, 0, sizeof(*hw));
-
-	for (i = 0; i <= 7; i++) {
-		hw->io_ports_array[i] = reg;
-		reg += regincr;
-	}
-
-	hw->io_ports.ctl_addr = ctrl_port;
-
-	if (irq)
-		*irq = 0;
-}
-
-/*
- * This registers the standard ports for this architecture with the IDE
- * driver.
- */
-static __inline__ void
-ide_init_default_hwifs(void)
-{
-    if (machine_is_lart()) {
-#ifdef CONFIG_SA1100_LART
-        hw_regs_t hw;
-
-        /* Enable GPIO as interrupt line */
-        GPDR &= ~LART_GPIO_IDE;
-	set_irq_type(LART_IRQ_IDE, IRQT_RISING);
-
-        /* set PCMCIA interface timing */
-        MECR = 0x00060006;
-
-        /* init the interface */
-	ide_init_hwif_ports(&hw, PCMCIA_IO_0_BASE + 0x0000, PCMCIA_IO_0_BASE + 0x1000, NULL);
-        hw.irq = LART_IRQ_IDE;
-        ide_register_hw(&hw);
-#endif
-    }
-}
diff --git a/include/asm-arm/arch-sa1100/io.h b/include/asm-arm/arch-sa1100/io.h
deleted file mode 100644
index 0756269404b1..000000000000
--- a/include/asm-arm/arch-sa1100/io.h
+++ /dev/null
@@ -1,26 +0,0 @@
-/*
- * linux/include/asm-arm/arch-sa1100/io.h
- *
- * Copyright (C) 1997-1999 Russell King
- *
- * Modifications:
- *  06-12-1997	RMK	Created.
- *  07-04-1999	RMK	Major cleanup
- */
-#ifndef __ASM_ARM_ARCH_IO_H
-#define __ASM_ARM_ARCH_IO_H
-
-#define IO_SPACE_LIMIT 0xffffffff
-
-/*
- * We don't actually have real ISA nor PCI buses, but there is so many 
- * drivers out there that might just work if we fake them...
- */
-static inline void __iomem *__io(unsigned long addr)
-{
-	return (void __iomem *)addr;
-}
-#define __io(a)			__io(a)
-#define __mem_pci(a)		(a)
-
-#endif
diff --git a/include/asm-arm/arch-sa1100/irqs.h b/include/asm-arm/arch-sa1100/irqs.h
deleted file mode 100644
index 7bf80484bb77..000000000000
--- a/include/asm-arm/arch-sa1100/irqs.h
+++ /dev/null
@@ -1,197 +0,0 @@
-/*
- * linux/include/asm-arm/arch-sa1100/irqs.h
- *
- * Copyright (C) 1996 Russell King
- * Copyright (C) 1998 Deborah Wallach (updates for SA1100/Brutus).
- * Copyright (C) 1999 Nicolas Pitre (full GPIO irq isolation)
- *
- * 2001/11/14	RMK	Cleaned up and standardised a lot of the IRQs.
- */
-
-#define	IRQ_GPIO0		0
-#define	IRQ_GPIO1		1
-#define	IRQ_GPIO2		2
-#define	IRQ_GPIO3		3
-#define	IRQ_GPIO4		4
-#define	IRQ_GPIO5		5
-#define	IRQ_GPIO6		6
-#define	IRQ_GPIO7		7
-#define	IRQ_GPIO8		8
-#define	IRQ_GPIO9		9
-#define	IRQ_GPIO10		10
-#define	IRQ_GPIO11_27		11
-#define	IRQ_LCD  		12	/* LCD controller           */
-#define	IRQ_Ser0UDC		13	/* Ser. port 0 UDC          */
-#define	IRQ_Ser1SDLC		14	/* Ser. port 1 SDLC         */
-#define	IRQ_Ser1UART		15	/* Ser. port 1 UART         */
-#define	IRQ_Ser2ICP		16	/* Ser. port 2 ICP          */
-#define	IRQ_Ser3UART		17	/* Ser. port 3 UART         */
-#define	IRQ_Ser4MCP		18	/* Ser. port 4 MCP          */
-#define	IRQ_Ser4SSP		19	/* Ser. port 4 SSP          */
-#define	IRQ_DMA0 		20	/* DMA controller channel 0 */
-#define	IRQ_DMA1 		21	/* DMA controller channel 1 */
-#define	IRQ_DMA2 		22	/* DMA controller channel 2 */
-#define	IRQ_DMA3 		23	/* DMA controller channel 3 */
-#define	IRQ_DMA4 		24	/* DMA controller channel 4 */
-#define	IRQ_DMA5 		25	/* DMA controller channel 5 */
-#define	IRQ_OST0 		26	/* OS Timer match 0         */
-#define	IRQ_OST1 		27	/* OS Timer match 1         */
-#define	IRQ_OST2 		28	/* OS Timer match 2         */
-#define	IRQ_OST3 		29	/* OS Timer match 3         */
-#define	IRQ_RTC1Hz		30	/* RTC 1 Hz clock           */
-#define	IRQ_RTCAlrm		31	/* RTC Alarm                */
-
-#define	IRQ_GPIO11		32
-#define	IRQ_GPIO12		33
-#define	IRQ_GPIO13		34
-#define	IRQ_GPIO14		35
-#define	IRQ_GPIO15		36
-#define	IRQ_GPIO16		37
-#define	IRQ_GPIO17		38
-#define	IRQ_GPIO18		39
-#define	IRQ_GPIO19		40
-#define	IRQ_GPIO20		41
-#define	IRQ_GPIO21		42
-#define	IRQ_GPIO22		43
-#define	IRQ_GPIO23		44
-#define	IRQ_GPIO24		45
-#define	IRQ_GPIO25		46
-#define	IRQ_GPIO26		47
-#define	IRQ_GPIO27		48
-
-/*
- * The next 16 interrupts are for board specific purposes.  Since
- * the kernel can only run on one machine at a time, we can re-use
- * these.  If you need more, increase IRQ_BOARD_END, but keep it
- * within sensible limits.  IRQs 49 to 64 are available.
- */
-#define IRQ_BOARD_START		49
-#define IRQ_BOARD_END		65
-
-#define IRQ_SA1111_START	(IRQ_BOARD_END)
-#define IRQ_GPAIN0		(IRQ_BOARD_END + 0)
-#define IRQ_GPAIN1		(IRQ_BOARD_END + 1)
-#define IRQ_GPAIN2		(IRQ_BOARD_END + 2)
-#define IRQ_GPAIN3		(IRQ_BOARD_END + 3)
-#define IRQ_GPBIN0		(IRQ_BOARD_END + 4)
-#define IRQ_GPBIN1		(IRQ_BOARD_END + 5)
-#define IRQ_GPBIN2		(IRQ_BOARD_END + 6)
-#define IRQ_GPBIN3		(IRQ_BOARD_END + 7)
-#define IRQ_GPBIN4		(IRQ_BOARD_END + 8)
-#define IRQ_GPBIN5		(IRQ_BOARD_END + 9)
-#define IRQ_GPCIN0		(IRQ_BOARD_END + 10)
-#define IRQ_GPCIN1		(IRQ_BOARD_END + 11)
-#define IRQ_GPCIN2		(IRQ_BOARD_END + 12)
-#define IRQ_GPCIN3		(IRQ_BOARD_END + 13)
-#define IRQ_GPCIN4		(IRQ_BOARD_END + 14)
-#define IRQ_GPCIN5		(IRQ_BOARD_END + 15)
-#define IRQ_GPCIN6		(IRQ_BOARD_END + 16)
-#define IRQ_GPCIN7		(IRQ_BOARD_END + 17)
-#define IRQ_MSTXINT		(IRQ_BOARD_END + 18)
-#define IRQ_MSRXINT		(IRQ_BOARD_END + 19)
-#define IRQ_MSSTOPERRINT	(IRQ_BOARD_END + 20)
-#define IRQ_TPTXINT		(IRQ_BOARD_END + 21)
-#define IRQ_TPRXINT		(IRQ_BOARD_END + 22)
-#define IRQ_TPSTOPERRINT	(IRQ_BOARD_END + 23)
-#define SSPXMTINT		(IRQ_BOARD_END + 24)
-#define SSPRCVINT		(IRQ_BOARD_END + 25)
-#define SSPROR			(IRQ_BOARD_END + 26)
-#define AUDXMTDMADONEA		(IRQ_BOARD_END + 32)
-#define AUDRCVDMADONEA		(IRQ_BOARD_END + 33)
-#define AUDXMTDMADONEB		(IRQ_BOARD_END + 34)
-#define AUDRCVDMADONEB		(IRQ_BOARD_END + 35)
-#define AUDTFSR			(IRQ_BOARD_END + 36)
-#define AUDRFSR			(IRQ_BOARD_END + 37)
-#define AUDTUR			(IRQ_BOARD_END + 38)
-#define AUDROR			(IRQ_BOARD_END + 39)
-#define AUDDTS			(IRQ_BOARD_END + 40)
-#define AUDRDD			(IRQ_BOARD_END + 41)
-#define AUDSTO			(IRQ_BOARD_END + 42)
-#define IRQ_USBPWR		(IRQ_BOARD_END + 43)
-#define IRQ_HCIM		(IRQ_BOARD_END + 44)
-#define IRQ_HCIBUFFACC		(IRQ_BOARD_END + 45)
-#define IRQ_HCIRMTWKP		(IRQ_BOARD_END + 46)
-#define IRQ_NHCIMFCIR		(IRQ_BOARD_END + 47)
-#define IRQ_USB_PORT_RESUME	(IRQ_BOARD_END + 48)
-#define IRQ_S0_READY_NINT	(IRQ_BOARD_END + 49)
-#define IRQ_S1_READY_NINT	(IRQ_BOARD_END + 50)
-#define IRQ_S0_CD_VALID		(IRQ_BOARD_END + 51)
-#define IRQ_S1_CD_VALID		(IRQ_BOARD_END + 52)
-#define IRQ_S0_BVD1_STSCHG	(IRQ_BOARD_END + 53)
-#define IRQ_S1_BVD1_STSCHG	(IRQ_BOARD_END + 54)
-
-#define IRQ_LOCOMO_START	(IRQ_BOARD_END)
-#define IRQ_LOCOMO_KEY		(IRQ_BOARD_END + 0)
-#define IRQ_LOCOMO_GPIO0	(IRQ_BOARD_END + 1)
-#define IRQ_LOCOMO_GPIO1	(IRQ_BOARD_END + 2)
-#define IRQ_LOCOMO_GPIO2	(IRQ_BOARD_END + 3)
-#define IRQ_LOCOMO_GPIO3	(IRQ_BOARD_END + 4)
-#define IRQ_LOCOMO_GPIO4	(IRQ_BOARD_END + 5)
-#define IRQ_LOCOMO_GPIO5	(IRQ_BOARD_END + 6)
-#define IRQ_LOCOMO_GPIO6	(IRQ_BOARD_END + 7)
-#define IRQ_LOCOMO_GPIO7	(IRQ_BOARD_END + 8)
-#define IRQ_LOCOMO_GPIO8	(IRQ_BOARD_END + 9)
-#define IRQ_LOCOMO_GPIO9	(IRQ_BOARD_END + 10)
-#define IRQ_LOCOMO_GPIO10	(IRQ_BOARD_END + 11)
-#define IRQ_LOCOMO_GPIO11	(IRQ_BOARD_END + 12)
-#define IRQ_LOCOMO_GPIO12	(IRQ_BOARD_END + 13)
-#define IRQ_LOCOMO_GPIO13	(IRQ_BOARD_END + 14)
-#define IRQ_LOCOMO_GPIO14	(IRQ_BOARD_END + 15)
-#define IRQ_LOCOMO_GPIO15	(IRQ_BOARD_END + 16)
-#define IRQ_LOCOMO_LT		(IRQ_BOARD_END + 17)
-#define IRQ_LOCOMO_SPI_RFR	(IRQ_BOARD_END + 18)
-#define IRQ_LOCOMO_SPI_RFW	(IRQ_BOARD_END + 19)
-#define IRQ_LOCOMO_SPI_REND	(IRQ_BOARD_END + 20)
-#define IRQ_LOCOMO_SPI_TEND	(IRQ_BOARD_END + 21)
-
-/*
- * Figure out the MAX IRQ number.
- *
- * If we have an SA1111, the max IRQ is S1_BVD1_STSCHG+1.
- * If we have an LoCoMo, the max IRQ is IRQ_LOCOMO_SPI_TEND+1
- * Otherwise, we have the standard IRQs only.
- */
-#ifdef CONFIG_SA1111
-#define NR_IRQS			(IRQ_S1_BVD1_STSCHG + 1)
-#elif defined(CONFIG_SA1100_H3800)
-#define NR_IRQS			(IRQ_BOARD_END)
-#elif defined(CONFIG_SHARP_LOCOMO)
-#define NR_IRQS			(IRQ_LOCOMO_SPI_TEND + 1)
-#else
-#define NR_IRQS			(IRQ_BOARD_START)
-#endif
-
-/*
- * Board specific IRQs.  Define them here.
- * Do not surround them with ifdefs.
- */
-#define IRQ_NEPONSET_SMC9196	(IRQ_BOARD_START + 0)
-#define IRQ_NEPONSET_USAR	(IRQ_BOARD_START + 1)
-#define IRQ_NEPONSET_SA1111	(IRQ_BOARD_START + 2)
-
-/* LoCoMo Interrupts (CONFIG_SHARP_LOCOMO) */
-#define IRQ_LOCOMO_KEY_BASE	(IRQ_BOARD_START + 0)
-#define IRQ_LOCOMO_GPIO_BASE	(IRQ_BOARD_START + 1)
-#define IRQ_LOCOMO_LT_BASE	(IRQ_BOARD_START + 2)
-#define IRQ_LOCOMO_SPI_BASE	(IRQ_BOARD_START + 3)
-
-/* H3800-specific IRQs (CONFIG_SA1100_H3800) */
-#define H3800_KPIO_IRQ_START    (IRQ_BOARD_START)
-#define IRQ_H3800_KEY           (IRQ_BOARD_START + 0)
-#define IRQ_H3800_SPI           (IRQ_BOARD_START + 1)
-#define IRQ_H3800_OWM           (IRQ_BOARD_START + 2)
-#define IRQ_H3800_ADC           (IRQ_BOARD_START + 3)
-#define IRQ_H3800_UART_0        (IRQ_BOARD_START + 4)
-#define IRQ_H3800_UART_1        (IRQ_BOARD_START + 5)
-#define IRQ_H3800_TIMER_0       (IRQ_BOARD_START + 6)
-#define IRQ_H3800_TIMER_1       (IRQ_BOARD_START + 7)
-#define IRQ_H3800_TIMER_2       (IRQ_BOARD_START + 8)
-#define H3800_KPIO_IRQ_COUNT    9
-
-#define H3800_GPIO_IRQ_START    (IRQ_BOARD_START + 9)
-#define IRQ_H3800_PEN           (IRQ_BOARD_START + 9)
-#define IRQ_H3800_SD_DETECT     (IRQ_BOARD_START + 10)
-#define IRQ_H3800_EAR_IN        (IRQ_BOARD_START + 11)
-#define IRQ_H3800_USB_DETECT    (IRQ_BOARD_START + 12)
-#define IRQ_H3800_SD_CON_SLT    (IRQ_BOARD_START + 13)
-#define H3800_GPIO_IRQ_COUNT    5
diff --git a/include/asm-arm/arch-sa1100/memory.h b/include/asm-arm/arch-sa1100/memory.h
deleted file mode 100644
index 0e907fc6d42a..000000000000
--- a/include/asm-arm/arch-sa1100/memory.h
+++ /dev/null
@@ -1,68 +0,0 @@
-/*
- * linux/include/asm-arm/arch-sa1100/memory.h
- *
- * Copyright (C) 1999-2000 Nicolas Pitre <nico@cam.org>
- */
-
-#ifndef __ASM_ARCH_MEMORY_H
-#define __ASM_ARCH_MEMORY_H
-
-#include <asm/sizes.h>
-
-/*
- * Physical DRAM offset is 0xc0000000 on the SA1100
- */
-#define PHYS_OFFSET	UL(0xc0000000)
-
-#ifndef __ASSEMBLY__
-
-#ifdef CONFIG_SA1111
-void sa1111_adjust_zones(int node, unsigned long *size, unsigned long *holes);
-
-#define arch_adjust_zones(node, size, holes) \
-	sa1111_adjust_zones(node, size, holes)
-
-#define ISA_DMA_THRESHOLD	(PHYS_OFFSET + SZ_1M - 1)
-
-#endif
-#endif
-
-/*
- * Virtual view <-> DMA view memory address translations
- * virt_to_bus: Used to translate the virtual address to an
- *		address suitable to be passed to set_dma_addr
- * bus_to_virt: Used to convert an address for DMA operations
- *		to an address that the kernel can use.
- *
- * On the SA1100, bus addresses are equivalent to physical addresses.
- */
-#define __virt_to_bus(x)	 __virt_to_phys(x)
-#define __bus_to_virt(x)	 __phys_to_virt(x)
-
-/*
- * Because of the wide memory address space between physical RAM banks on the 
- * SA1100, it's much convenient to use Linux's NUMA support to implement our 
- * memory map representation.  Assuming all memory nodes have equal access 
- * characteristics, we then have generic discontiguous memory support.
- *
- * Of course, all this isn't mandatory for SA1100 implementations with only
- * one used memory bank.  For those, simply undefine CONFIG_DISCONTIGMEM.
- *
- * The nodes are matched with the physical memory bank addresses which are 
- * incidentally the same as virtual addresses.
- * 
- * 	node 0:  0xc0000000 - 0xc7ffffff
- * 	node 1:  0xc8000000 - 0xcfffffff
- * 	node 2:  0xd0000000 - 0xd7ffffff
- * 	node 3:  0xd8000000 - 0xdfffffff
- */
-#define NODE_MEM_SIZE_BITS	27
-
-/*
- * Cache flushing area - SA1100 zero bank
- */
-#define FLUSH_BASE_PHYS		0xe0000000
-#define FLUSH_BASE		0xf5000000
-#define FLUSH_BASE_MINICACHE	0xf5100000
-
-#endif
diff --git a/include/asm-arm/arch-sa1100/mtd-xip.h b/include/asm-arm/arch-sa1100/mtd-xip.h
deleted file mode 100644
index 80cfdac2b944..000000000000
--- a/include/asm-arm/arch-sa1100/mtd-xip.h
+++ /dev/null
@@ -1,26 +0,0 @@
-/*
- * MTD primitives for XIP support. Architecture specific functions
- *
- * Do not include this file directly. It's included from linux/mtd/xip.h
- * 
- * Author:	Nicolas Pitre
- * Created:	Nov 2, 2004
- * Copyright:	(C) 2004 MontaVista Software, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * $Id: xip.h,v 1.2 2004/12/01 15:49:10 nico Exp $
- */
-
-#ifndef __ARCH_SA1100_MTD_XIP_H__
-#define __ARCH_SA1100_MTD_XIP_H__
-
-#define xip_irqpending()	(ICIP & ICMR)
-
-/* we sample OSCR and convert desired delta to usec (1/4 ~= 1000000/3686400) */
-#define xip_currtime()		(OSCR)
-#define xip_elapsed_since(x)	(signed)((OSCR - (x)) / 4)
-
-#endif /* __ARCH_SA1100_MTD_XIP_H__ */
diff --git a/include/asm-arm/arch-sa1100/system.h b/include/asm-arm/arch-sa1100/system.h
deleted file mode 100644
index aef91e3b63fe..000000000000
--- a/include/asm-arm/arch-sa1100/system.h
+++ /dev/null
@@ -1,22 +0,0 @@
-/*
- * linux/include/asm-arm/arch-sa1100/system.h
- *
- * Copyright (c) 1999 Nicolas Pitre <nico@cam.org>
- */
-#include <asm/hardware.h>
-
-static inline void arch_idle(void)
-{
-	cpu_do_idle();
-}
-
-static inline void arch_reset(char mode)
-{
-	if (mode == 's') {
-		/* Jump into ROM at address 0 */
-		cpu_reset(0);
-	} else {
-		/* Use on-chip reset capability */
-		RSRR = RSRR_SWR;
-	}
-}
diff --git a/include/asm-arm/arch-sa1100/timex.h b/include/asm-arm/arch-sa1100/timex.h
deleted file mode 100644
index 837be9b797dd..000000000000
--- a/include/asm-arm/arch-sa1100/timex.h
+++ /dev/null
@@ -1,12 +0,0 @@
-/*
- * linux/include/asm-arm/arch-sa1100/timex.h
- *
- * SA1100 architecture timex specifications
- *
- * Copyright (C) 1998 
- */
-
-/*
- * SA1100 timer
- */
-#define CLOCK_TICK_RATE		3686400
diff --git a/include/asm-arm/arch-sa1100/uncompress.h b/include/asm-arm/arch-sa1100/uncompress.h
deleted file mode 100644
index 17e64d232e7d..000000000000
--- a/include/asm-arm/arch-sa1100/uncompress.h
+++ /dev/null
@@ -1,50 +0,0 @@
-/*
- * linux/include/asm-arm/arch-sa1100/uncompress.h
- *
- * (C) 1999 Nicolas Pitre <nico@cam.org>
- *
- * Reorganised to be machine independent.
- */
-
-#include "hardware.h"
-
-/*
- * The following code assumes the serial port has already been
- * initialized by the bootloader.  We search for the first enabled
- * port in the most probable order.  If you didn't setup a port in
- * your bootloader then nothing will appear (which might be desired).
- */
-
-#define UART(x)		(*(volatile unsigned long *)(serial_port + (x)))
-
-static void putc(int c)
-{
-	unsigned long serial_port;
-
-	do {
-		serial_port = _Ser3UTCR0;
-		if (UART(UTCR3) & UTCR3_TXE) break;
-		serial_port = _Ser1UTCR0;
-		if (UART(UTCR3) & UTCR3_TXE) break;
-		serial_port = _Ser2UTCR0;
-		if (UART(UTCR3) & UTCR3_TXE) break;
-		return;
-	} while (0);
-
-	/* wait for space in the UART's transmitter */
-	while (!(UART(UTSR1) & UTSR1_TNF))
-		barrier();
-
-	/* send the character out. */
-	UART(UTDR) = c;
-}
-
-static inline void flush(void)
-{
-}
-
-/*
- * Nothing to do for these
- */
-#define arch_decomp_setup()
-#define arch_decomp_wdog()
diff --git a/include/asm-arm/arch-sa1100/vmalloc.h b/include/asm-arm/arch-sa1100/vmalloc.h
deleted file mode 100644
index 2fb1c6f3aa1b..000000000000
--- a/include/asm-arm/arch-sa1100/vmalloc.h
+++ /dev/null
@@ -1,4 +0,0 @@
-/*
- * linux/include/asm-arm/arch-sa1100/vmalloc.h
- */
-#define VMALLOC_END       (0xe8000000)
diff --git a/include/asm-arm/arch-shark/debug-macro.S b/include/asm-arm/arch-shark/debug-macro.S
deleted file mode 100644
index 7cb37f78825e..000000000000
--- a/include/asm-arm/arch-shark/debug-macro.S
+++ /dev/null
@@ -1,31 +0,0 @@
-/* linux/include/asm-arm/arch-shark/debug-macro.S
- *
- * Debugging macro include header
- *
- *  Copyright (C) 1994-1999 Russell King
- *  Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
-*/
-
-		.macro	addruart,rx
-		mov	\rx, #0xe0000000
-		orr	\rx, \rx, #0x000003f8
-		.endm
-
-		.macro	senduart,rd,rx
-		strb	\rd, [\rx]
-		.endm
-
-		.macro	busyuart,rd,rx
-		mov	\rd, #0
-1001:		add	\rd, \rd, #1
-		teq	\rd, #0x10000
-		bne	1001b
-		.endm
-
-		.macro	waituart,rd,rx
-		.endm
diff --git a/include/asm-arm/arch-shark/dma.h b/include/asm-arm/arch-shark/dma.h
deleted file mode 100644
index fc985d5e62af..000000000000
--- a/include/asm-arm/arch-shark/dma.h
+++ /dev/null
@@ -1,18 +0,0 @@
-/*
- * linux/include/asm-arm/arch-shark/dma.h
- *
- * by Alexander Schulz
- */
-#ifndef __ASM_ARCH_DMA_H
-#define __ASM_ARCH_DMA_H
-
-/* Use only the lowest 4MB, nothing else works.
- * The rest is not DMAable. See dev /  .properties
- * in OpenFirmware.
- */
-#define MAX_DMA_ADDRESS		0xC0400000
-#define MAX_DMA_CHANNELS	8
-#define DMA_ISA_CASCADE         4
-
-#endif /* _ASM_ARCH_DMA_H */
-
diff --git a/include/asm-arm/arch-shark/entry-macro.S b/include/asm-arm/arch-shark/entry-macro.S
deleted file mode 100644
index 82463f30f3df..000000000000
--- a/include/asm-arm/arch-shark/entry-macro.S
+++ /dev/null
@@ -1,41 +0,0 @@
-/*
- * include/asm-arm/arch-shark/entry-macro.S
- *
- * Low-level IRQ helper macros for Shark platform
- *
- * This file is licensed under  the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-		.macro	disable_fiq
-		.endm
-
-		.macro  get_irqnr_preamble, base, tmp
-		.endm
-
-		.macro  arch_ret_to_user, tmp1, tmp2
-		.endm
-
-		.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
-		mov	r4, #0xe0000000
-
-		mov	\irqstat, #0x0C
-		strb	\irqstat, [r4, #0x20]		@outb(0x0C, 0x20) /* Poll command */
-		ldrb	\irqnr, [r4, #0x20]		@irq = inb(0x20) & 7
-		and	\irqstat, \irqnr, #0x80
-		teq	\irqstat, #0
-		beq	43f
-		and	\irqnr, \irqnr, #7
-		teq	\irqnr, #2
-		bne	44f
-43:		mov	\irqstat, #0x0C
-		strb	\irqstat, [r4, #0xa0]		@outb(0x0C, 0xA0) /* Poll command */
-		ldrb	\irqnr, [r4, #0xa0]		@irq = (inb(0xA0) & 7) + 8
-		and	\irqstat, \irqnr, #0x80
-		teq	\irqstat, #0
-		beq	44f
-		and	\irqnr, \irqnr, #7
-		add	\irqnr, \irqnr, #8
-44:		teq	\irqstat, #0
-		.endm
-
diff --git a/include/asm-arm/arch-shark/hardware.h b/include/asm-arm/arch-shark/hardware.h
deleted file mode 100644
index ecba45260898..000000000000
--- a/include/asm-arm/arch-shark/hardware.h
+++ /dev/null
@@ -1,51 +0,0 @@
-/*
- * linux/include/asm-arm/arch-shark/hardware.h
- *
- * by Alexander Schulz
- *
- * derived from:
- * linux/include/asm-arm/arch-ebsa110/hardware.h
- * Copyright (C) 1996-1999 Russell King.
- */
-#ifndef __ASM_ARCH_HARDWARE_H
-#define __ASM_ARCH_HARDWARE_H
-
-#ifndef __ASSEMBLY__
-
-/*
- * Mapping areas
- */
-#define IO_BASE			0xe0000000
-
-#else
-
-#define IO_BASE			0
-
-#endif
-
-#define IO_SIZE			0x08000000
-#define IO_START		0x40000000
-#define ROMCARD_SIZE		0x08000000
-#define ROMCARD_START		0x10000000
-
-#define PCIO_BASE		0xe0000000
-
-
-/* defines for the Framebuffer */
-#define FB_START		0x06000000
-#define FB_SIZE			0x01000000
-
-#define UNCACHEABLE_ADDR        0xdf010000
-
-#define SEQUOIA_LED_GREEN       (1<<6)
-#define SEQUOIA_LED_AMBER       (1<<5)
-#define SEQUOIA_LED_BACK        (1<<7)
-
-#define pcibios_assign_all_busses()     1
-
-#define PCIBIOS_MIN_IO          0x6000
-#define PCIBIOS_MIN_MEM         0x50000000
-#define PCIMEM_BASE		0xe8000000
-
-#endif
-
diff --git a/include/asm-arm/arch-shark/io.h b/include/asm-arm/arch-shark/io.h
deleted file mode 100644
index 87ffa27f2962..000000000000
--- a/include/asm-arm/arch-shark/io.h
+++ /dev/null
@@ -1,56 +0,0 @@
-/*
- * linux/include/asm-arm/arch-shark/io.h
- *
- * by Alexander Schulz
- *
- * derived from:
- * linux/include/asm-arm/arch-ebsa110/io.h
- * Copyright (C) 1997,1998 Russell King
- */
-
-#ifndef __ASM_ARM_ARCH_IO_H
-#define __ASM_ARM_ARCH_IO_H
-
-#include <asm/hardware.h>
-
-#define IO_SPACE_LIMIT 0xffffffff
-
-/*
- * We use two different types of addressing - PC style addresses, and ARM
- * addresses.  PC style accesses the PC hardware with the normal PC IO
- * addresses, eg 0x3f8 for serial#1.  ARM addresses are 0x80000000+
- * and are translated to the start of IO.
- */
-#define __PORT_PCIO(x)	(!((x) & 0x80000000))
-
-#define __io(a)                 ((void __iomem *)(PCIO_BASE + (a)))
-
-
-static inline unsigned int __ioaddr (unsigned int port)			\
-{										\
-	if (__PORT_PCIO(port))							\
-		return (unsigned int)(PCIO_BASE + (port));			\
-	else									\
-		return (unsigned int)(IO_BASE + (port));			\
-}
-
-#define __mem_pci(addr) (addr)
-
-/*
- * Translated address IO functions
- *
- * IO address has already been translated to a virtual address
- */
-#define outb_t(v,p)								\
-	(*(volatile unsigned char *)(p) = (v))
-
-#define inb_t(p)								\
-	(*(volatile unsigned char *)(p))
-
-#define outl_t(v,p)								\
-	(*(volatile unsigned long *)(p) = (v))
-
-#define inl_t(p)								\
-	(*(volatile unsigned long *)(p))
-
-#endif
diff --git a/include/asm-arm/arch-shark/irqs.h b/include/asm-arm/arch-shark/irqs.h
deleted file mode 100644
index b36cc975b290..000000000000
--- a/include/asm-arm/arch-shark/irqs.h
+++ /dev/null
@@ -1,13 +0,0 @@
-/*
- * linux/include/asm-arm/arch-shark/irqs.h
- *
- * by Alexander Schulz
- */
-
-#define NR_IRQS			16
-
-#define IRQ_ISA_KEYBOARD	 1
-#define RTC_IRQ			 8
-#define I8042_KBD_IRQ		 1
-#define I8042_AUX_IRQ		12
-#define IRQ_HARDDISK            14
diff --git a/include/asm-arm/arch-shark/memory.h b/include/asm-arm/arch-shark/memory.h
deleted file mode 100644
index 6968d6103ea0..000000000000
--- a/include/asm-arm/arch-shark/memory.h
+++ /dev/null
@@ -1,48 +0,0 @@
-/*
- * linux/include/asm-arm/arch-shark/memory.h
- *
- * by Alexander Schulz
- *
- * derived from:
- * linux/include/asm-arm/arch-ebsa110/memory.h
- * Copyright (c) 1996-1999 Russell King.
- */
-#ifndef __ASM_ARCH_MEMORY_H
-#define __ASM_ARCH_MEMORY_H
-
-#include <asm/sizes.h>
-
-/*
- * Physical DRAM offset.
- */
-#define PHYS_OFFSET     UL(0x08000000)
-
-#ifndef __ASSEMBLY__
-
-static inline void __arch_adjust_zones(int node, unsigned long *zone_size, unsigned long *zhole_size) 
-{
-  if (node != 0) return;
-  /* Only the first 4 MB (=1024 Pages) are usable for DMA */
-  zone_size[1] = zone_size[0] - 1024;
-  zone_size[0] = 1024;
-  zhole_size[1] = zhole_size[0];
-  zhole_size[0] = 0;
-}
-
-#define arch_adjust_zones(node, size, holes) \
-	__arch_adjust_zones(node, size, holes)
-
-#define ISA_DMA_THRESHOLD	(PHYS_OFFSET + SZ_4M - 1)
-
-#endif
-
-#define __virt_to_bus(x)	__virt_to_phys(x)
-#define __bus_to_virt(x)	__phys_to_virt(x)
-
-/*
- * Cache flushing area
- */
-#define FLUSH_BASE_PHYS		0x80000000
-#define FLUSH_BASE		0xdf000000
-
-#endif
diff --git a/include/asm-arm/arch-shark/system.h b/include/asm-arm/arch-shark/system.h
deleted file mode 100644
index f12d771ab4ce..000000000000
--- a/include/asm-arm/arch-shark/system.h
+++ /dev/null
@@ -1,28 +0,0 @@
-/*
- * linux/include/asm-arm/arch-shark/system.h
- *
- * by Alexander Schulz
- */
-#ifndef __ASM_ARCH_SYSTEM_H
-#define __ASM_ARCH_SYSTEM_H
-
-#include <asm/io.h>
-
-static void arch_reset(char mode)
-{
-	short temp;
-	local_irq_disable();
-	/* Reset the Machine via pc[3] of the sequoia chipset */
-	outw(0x09,0x24);
-	temp=inw(0x26);
-	temp = temp | (1<<3) | (1<<10);
-	outw(0x09,0x24);
-	outw(temp,0x26);
-
-}
-
-static inline void arch_idle(void)
-{
-}
-
-#endif
diff --git a/include/asm-arm/arch-shark/timex.h b/include/asm-arm/arch-shark/timex.h
deleted file mode 100644
index 0d02d255513b..000000000000
--- a/include/asm-arm/arch-shark/timex.h
+++ /dev/null
@@ -1,7 +0,0 @@
-/*
- * linux/include/asm-arm/arch-shark/timex.h
- *
- * by Alexander Schulz
- */
-
-#define CLOCK_TICK_RATE 1193180
diff --git a/include/asm-arm/arch-shark/uncompress.h b/include/asm-arm/arch-shark/uncompress.h
deleted file mode 100644
index 7eca6534f1bb..000000000000
--- a/include/asm-arm/arch-shark/uncompress.h
+++ /dev/null
@@ -1,51 +0,0 @@
-/*
- * linux/include/asm-arm/arch-shark/uncompress.h
- * by Alexander Schulz
- *
- * derived from:
- * linux/include/asm-arm/arch-ebsa285/uncompress.h
- * Copyright (C) 1996,1997,1998 Russell King
- */
-
-#define SERIAL_BASE ((volatile unsigned char *)0x400003f8)
-
-static inline void putc(int c)
-{
-	int t;
-
-	SERIAL_BASE[0] = c;
-	t=0x10000;
-	while (t--);
-}
-
-static inline void flush(void)
-{
-}
-
-#ifdef DEBUG
-static void putn(unsigned long z)
-{
-	int i;
-	char x;
-
-	putc('0');
-	putc('x');
-	for (i=0;i<8;i++) {
-		x='0'+((z>>((7-i)*4))&0xf);
-		if (x>'9') x=x-'0'+'A'-10;
-		putc(x);
-	}
-}
-
-static void putr()
-{
-	putc('\n');
-	putc('\r');
-}
-#endif
-
-/*
- * nothing to do
- */
-#define arch_decomp_setup()
-#define arch_decomp_wdog()
diff --git a/include/asm-arm/arch-shark/vmalloc.h b/include/asm-arm/arch-shark/vmalloc.h
deleted file mode 100644
index fac37c636b38..000000000000
--- a/include/asm-arm/arch-shark/vmalloc.h
+++ /dev/null
@@ -1,4 +0,0 @@
-/*
- * linux/include/asm-arm/arch-shark/vmalloc.h
- */
-#define VMALLOC_END       (PAGE_OFFSET + 0x10000000)
diff --git a/include/asm-arm/arch-versatile/debug-macro.S b/include/asm-arm/arch-versatile/debug-macro.S
deleted file mode 100644
index fe106d184e62..000000000000
--- a/include/asm-arm/arch-versatile/debug-macro.S
+++ /dev/null
@@ -1,23 +0,0 @@
-/* linux/include/asm-arm/arch-versatile/debug-macro.S
- *
- * Debugging macro include header
- *
- *  Copyright (C) 1994-1999 Russell King
- *  Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
-*/
-
-		.macro	addruart,rx
-		mrc	p15, 0, \rx, c1, c0
-		tst	\rx, #1			@ MMU enabled?
-		moveq	\rx,      #0x10000000
-		movne	\rx,      #0xf1000000	@ virtual base
-		orr	\rx, \rx, #0x001F0000
-		orr	\rx, \rx, #0x00001000
-		.endm
-
-#include <asm/hardware/debug-pl01x.S>
diff --git a/include/asm-arm/arch-versatile/dma.h b/include/asm-arm/arch-versatile/dma.h
deleted file mode 100644
index 642577348623..000000000000
--- a/include/asm-arm/arch-versatile/dma.h
+++ /dev/null
@@ -1,20 +0,0 @@
-/*
- *  linux/include/asm-arm/arch-versatile/dma.h
- *
- *  Copyright (C) 2003 ARM Limited.
- *  Copyright (C) 1997,1998 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
diff --git a/include/asm-arm/arch-versatile/entry-macro.S b/include/asm-arm/arch-versatile/entry-macro.S
deleted file mode 100644
index 924d1a8fe360..000000000000
--- a/include/asm-arm/arch-versatile/entry-macro.S
+++ /dev/null
@@ -1,44 +0,0 @@
-/*
- * include/asm-arm/arch-versatile/entry-macro.S
- *
- * Low-level IRQ helper macros for Versatile platforms
- *
- * This file is licensed under  the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-#include <asm/hardware.h>
-#include <asm/hardware/vic.h>
-
-		.macro	disable_fiq
-		.endm
-
-		.macro  get_irqnr_preamble, base, tmp
-		ldr	\base, =IO_ADDRESS(VERSATILE_VIC_BASE)
-		.endm
-
-		.macro  arch_ret_to_user, tmp1, tmp2
-		.endm
-
-		.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
-		ldr	\irqstat, [\base, #VIC_IRQ_STATUS]	@ get masked status
-		mov	\irqnr, #0
-		teq	\irqstat, #0
-		beq	1003f
-
-1001:		tst	\irqstat, #15
-		bne	1002f
-		add	\irqnr, \irqnr, #4
-		movs	\irqstat, \irqstat, lsr #4
-		bne	1001b
-1002:		tst	\irqstat, #1
-		bne	1003f
-		add	\irqnr, \irqnr, #1
-		movs	\irqstat, \irqstat, lsr #1
-		bne	1002b
-1003:		/* EQ will be set if no irqs pending */
-
-@		clz	\irqnr, \irqstat
-@1003:		/* EQ will be set if we reach MAXIRQNUM */
-		.endm
-
diff --git a/include/asm-arm/arch-versatile/hardware.h b/include/asm-arm/arch-versatile/hardware.h
deleted file mode 100644
index edc06598d187..000000000000
--- a/include/asm-arm/arch-versatile/hardware.h
+++ /dev/null
@@ -1,52 +0,0 @@
-/*
- *  linux/include/asm-arm/arch-versatile/hardware.h
- *
- *  This file contains the hardware definitions of the Versatile boards.
- *
- *  Copyright (C) 2003 ARM Limited.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-#ifndef __ASM_ARCH_HARDWARE_H
-#define __ASM_ARCH_HARDWARE_H
-
-#include <asm/sizes.h>
-#include <asm/arch/platform.h>
-
-/*
- * PCI space virtual addresses
- */
-#define VERSATILE_PCI_VIRT_BASE		(void __iomem *)0xe8000000ul
-#define VERSATILE_PCI_CFG_VIRT_BASE	(void __iomem *)0xe9000000ul
-
-#if 0
-#define VERSATILE_PCI_VIRT_MEM_BASE0	0xf4000000
-#define VERSATILE_PCI_VIRT_MEM_BASE1	0xf5000000
-#define VERSATILE_PCI_VIRT_MEM_BASE2	0xf6000000
-
-#define PCIO_BASE			VERSATILE_PCI_VIRT_MEM_BASE0
-#define PCIMEM_BASE			VERSATILE_PCI_VIRT_MEM_BASE1
-#endif
-
-/* CIK guesswork */
-#define PCIBIOS_MIN_IO			0x44000000
-#define PCIBIOS_MIN_MEM			0x50000000
-
-#define pcibios_assign_all_busses()     1
-
-/* macro to get at IO space when running virtually */
-#define IO_ADDRESS(x)		(((x) & 0x0fffffff) + (((x) >> 4) & 0x0f000000) + 0xf0000000)
-
-#endif
diff --git a/include/asm-arm/arch-versatile/io.h b/include/asm-arm/arch-versatile/io.h
deleted file mode 100644
index c4d01948e00b..000000000000
--- a/include/asm-arm/arch-versatile/io.h
+++ /dev/null
@@ -1,32 +0,0 @@
-/*
- *  linux/include/asm-arm/arch-versatile/io.h
- *
- *  Copyright (C) 2003 ARM Limited
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-#ifndef __ASM_ARM_ARCH_IO_H
-#define __ASM_ARM_ARCH_IO_H
-
-#define IO_SPACE_LIMIT 0xffffffff
-
-static inline void __iomem *__io(unsigned long addr)
-{
-	return (void __iomem *)addr;
-}
-#define __io(a)	__io(a)
-#define __mem_pci(a)		(a)
-
-#endif
diff --git a/include/asm-arm/arch-versatile/irqs.h b/include/asm-arm/arch-versatile/irqs.h
deleted file mode 100644
index f7263b99403b..000000000000
--- a/include/asm-arm/arch-versatile/irqs.h
+++ /dev/null
@@ -1,211 +0,0 @@
-/*
- *  linux/include/asm-arm/arch-versatile/irqs.h
- *
- *  Copyright (C) 2003 ARM Limited
- *  Copyright (C) 2000 Deep Blue Solutions Ltd.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#include <asm/arch/platform.h>
-
-/* 
- *  IRQ interrupts definitions are the same as the INT definitions
- *  held within platform.h
- */
-#define IRQ_VIC_START		0
-#define IRQ_WDOGINT		(IRQ_VIC_START + INT_WDOGINT)
-#define IRQ_SOFTINT		(IRQ_VIC_START + INT_SOFTINT)
-#define IRQ_COMMRx		(IRQ_VIC_START + INT_COMMRx)
-#define IRQ_COMMTx		(IRQ_VIC_START + INT_COMMTx)
-#define IRQ_TIMERINT0_1		(IRQ_VIC_START + INT_TIMERINT0_1)
-#define IRQ_TIMERINT2_3		(IRQ_VIC_START + INT_TIMERINT2_3)
-#define IRQ_GPIOINT0		(IRQ_VIC_START + INT_GPIOINT0)
-#define IRQ_GPIOINT1		(IRQ_VIC_START + INT_GPIOINT1)
-#define IRQ_GPIOINT2		(IRQ_VIC_START + INT_GPIOINT2)
-#define IRQ_GPIOINT3		(IRQ_VIC_START + INT_GPIOINT3)
-#define IRQ_RTCINT		(IRQ_VIC_START + INT_RTCINT)
-#define IRQ_SSPINT		(IRQ_VIC_START + INT_SSPINT)
-#define IRQ_UARTINT0		(IRQ_VIC_START + INT_UARTINT0)
-#define IRQ_UARTINT1		(IRQ_VIC_START + INT_UARTINT1)
-#define IRQ_UARTINT2		(IRQ_VIC_START + INT_UARTINT2)
-#define IRQ_SCIINT		(IRQ_VIC_START + INT_SCIINT)
-#define IRQ_CLCDINT		(IRQ_VIC_START + INT_CLCDINT)
-#define IRQ_DMAINT		(IRQ_VIC_START + INT_DMAINT)
-#define IRQ_PWRFAILINT 		(IRQ_VIC_START + INT_PWRFAILINT)
-#define IRQ_MBXINT		(IRQ_VIC_START + INT_MBXINT)
-#define IRQ_GNDINT		(IRQ_VIC_START + INT_GNDINT)
-#define IRQ_VICSOURCE21		(IRQ_VIC_START + INT_VICSOURCE21)
-#define IRQ_VICSOURCE22		(IRQ_VIC_START + INT_VICSOURCE22)
-#define IRQ_VICSOURCE23		(IRQ_VIC_START + INT_VICSOURCE23)
-#define IRQ_VICSOURCE24		(IRQ_VIC_START + INT_VICSOURCE24)
-#define IRQ_VICSOURCE25		(IRQ_VIC_START + INT_VICSOURCE25)
-#define IRQ_VICSOURCE26		(IRQ_VIC_START + INT_VICSOURCE26)
-#define IRQ_VICSOURCE27		(IRQ_VIC_START + INT_VICSOURCE27)
-#define IRQ_VICSOURCE28		(IRQ_VIC_START + INT_VICSOURCE28)
-#define IRQ_VICSOURCE29		(IRQ_VIC_START + INT_VICSOURCE29)
-#define IRQ_VICSOURCE30		(IRQ_VIC_START + INT_VICSOURCE30)
-#define IRQ_VICSOURCE31		(IRQ_VIC_START + INT_VICSOURCE31)
-#define IRQ_VIC_END		(IRQ_VIC_START + 31)
-
-#define IRQMASK_WDOGINT		INTMASK_WDOGINT
-#define IRQMASK_SOFTINT		INTMASK_SOFTINT
-#define IRQMASK_COMMRx 		INTMASK_COMMRx
-#define IRQMASK_COMMTx 		INTMASK_COMMTx
-#define IRQMASK_TIMERINT0_1	INTMASK_TIMERINT0_1
-#define IRQMASK_TIMERINT2_3	INTMASK_TIMERINT2_3
-#define IRQMASK_GPIOINT0	INTMASK_GPIOINT0
-#define IRQMASK_GPIOINT1	INTMASK_GPIOINT1
-#define IRQMASK_GPIOINT2	INTMASK_GPIOINT2
-#define IRQMASK_GPIOINT3	INTMASK_GPIOINT3
-#define IRQMASK_RTCINT 		INTMASK_RTCINT
-#define IRQMASK_SSPINT 		INTMASK_SSPINT
-#define IRQMASK_UARTINT0	INTMASK_UARTINT0
-#define IRQMASK_UARTINT1	INTMASK_UARTINT1
-#define IRQMASK_UARTINT2	INTMASK_UARTINT2
-#define IRQMASK_SCIINT 		INTMASK_SCIINT
-#define IRQMASK_CLCDINT		INTMASK_CLCDINT
-#define IRQMASK_DMAINT 		INTMASK_DMAINT
-#define IRQMASK_PWRFAILINT	INTMASK_PWRFAILINT
-#define IRQMASK_MBXINT 		INTMASK_MBXINT
-#define IRQMASK_GNDINT 		INTMASK_GNDINT
-#define IRQMASK_VICSOURCE21	INTMASK_VICSOURCE21
-#define IRQMASK_VICSOURCE22	INTMASK_VICSOURCE22
-#define IRQMASK_VICSOURCE23	INTMASK_VICSOURCE23
-#define IRQMASK_VICSOURCE24	INTMASK_VICSOURCE24
-#define IRQMASK_VICSOURCE25	INTMASK_VICSOURCE25
-#define IRQMASK_VICSOURCE26	INTMASK_VICSOURCE26
-#define IRQMASK_VICSOURCE27	INTMASK_VICSOURCE27
-#define IRQMASK_VICSOURCE28	INTMASK_VICSOURCE28
-#define IRQMASK_VICSOURCE29	INTMASK_VICSOURCE29
-#define IRQMASK_VICSOURCE30	INTMASK_VICSOURCE30
-#define IRQMASK_VICSOURCE31	INTMASK_VICSOURCE31
-
-/* 
- *  FIQ interrupts definitions are the same as the INT definitions.
- */
-#define FIQ_WDOGINT		INT_WDOGINT
-#define FIQ_SOFTINT		INT_SOFTINT
-#define FIQ_COMMRx		INT_COMMRx
-#define FIQ_COMMTx		INT_COMMTx
-#define FIQ_TIMERINT0_1		INT_TIMERINT0_1
-#define FIQ_TIMERINT2_3		INT_TIMERINT2_3
-#define FIQ_GPIOINT0		INT_GPIOINT0
-#define FIQ_GPIOINT1		INT_GPIOINT1
-#define FIQ_GPIOINT2		INT_GPIOINT2
-#define FIQ_GPIOINT3		INT_GPIOINT3
-#define FIQ_RTCINT		INT_RTCINT
-#define FIQ_SSPINT		INT_SSPINT
-#define FIQ_UARTINT0		INT_UARTINT0
-#define FIQ_UARTINT1		INT_UARTINT1
-#define FIQ_UARTINT2		INT_UARTINT2
-#define FIQ_SCIINT		INT_SCIINT
-#define FIQ_CLCDINT		INT_CLCDINT
-#define FIQ_DMAINT		INT_DMAINT
-#define FIQ_PWRFAILINT 		INT_PWRFAILINT
-#define FIQ_MBXINT		INT_MBXINT
-#define FIQ_GNDINT		INT_GNDINT
-#define FIQ_VICSOURCE21		INT_VICSOURCE21
-#define FIQ_VICSOURCE22		INT_VICSOURCE22
-#define FIQ_VICSOURCE23		INT_VICSOURCE23
-#define FIQ_VICSOURCE24		INT_VICSOURCE24
-#define FIQ_VICSOURCE25		INT_VICSOURCE25
-#define FIQ_VICSOURCE26		INT_VICSOURCE26
-#define FIQ_VICSOURCE27		INT_VICSOURCE27
-#define FIQ_VICSOURCE28		INT_VICSOURCE28
-#define FIQ_VICSOURCE29		INT_VICSOURCE29
-#define FIQ_VICSOURCE30		INT_VICSOURCE30
-#define FIQ_VICSOURCE31		INT_VICSOURCE31
-
-
-#define FIQMASK_WDOGINT		INTMASK_WDOGINT
-#define FIQMASK_SOFTINT		INTMASK_SOFTINT
-#define FIQMASK_COMMRx 		INTMASK_COMMRx
-#define FIQMASK_COMMTx 		INTMASK_COMMTx
-#define FIQMASK_TIMERINT0_1	INTMASK_TIMERINT0_1
-#define FIQMASK_TIMERINT2_3	INTMASK_TIMERINT2_3
-#define FIQMASK_GPIOINT0	INTMASK_GPIOINT0
-#define FIQMASK_GPIOINT1	INTMASK_GPIOINT1
-#define FIQMASK_GPIOINT2	INTMASK_GPIOINT2
-#define FIQMASK_GPIOINT3	INTMASK_GPIOINT3
-#define FIQMASK_RTCINT 		INTMASK_RTCINT
-#define FIQMASK_SSPINT 		INTMASK_SSPINT
-#define FIQMASK_UARTINT0	INTMASK_UARTINT0
-#define FIQMASK_UARTINT1	INTMASK_UARTINT1
-#define FIQMASK_UARTINT2	INTMASK_UARTINT2
-#define FIQMASK_SCIINT 		INTMASK_SCIINT
-#define FIQMASK_CLCDINT		INTMASK_CLCDINT
-#define FIQMASK_DMAINT 		INTMASK_DMAINT
-#define FIQMASK_PWRFAILINT	INTMASK_PWRFAILINT
-#define FIQMASK_MBXINT 		INTMASK_MBXINT
-#define FIQMASK_GNDINT 		INTMASK_GNDINT
-#define FIQMASK_VICSOURCE21	INTMASK_VICSOURCE21
-#define FIQMASK_VICSOURCE22	INTMASK_VICSOURCE22
-#define FIQMASK_VICSOURCE23	INTMASK_VICSOURCE23
-#define FIQMASK_VICSOURCE24	INTMASK_VICSOURCE24
-#define FIQMASK_VICSOURCE25	INTMASK_VICSOURCE25
-#define FIQMASK_VICSOURCE26	INTMASK_VICSOURCE26
-#define FIQMASK_VICSOURCE27	INTMASK_VICSOURCE27
-#define FIQMASK_VICSOURCE28	INTMASK_VICSOURCE28
-#define FIQMASK_VICSOURCE29	INTMASK_VICSOURCE29
-#define FIQMASK_VICSOURCE30	INTMASK_VICSOURCE30
-#define FIQMASK_VICSOURCE31	INTMASK_VICSOURCE31
-
-/*
- * Secondary interrupt controller
- */
-#define IRQ_SIC_START		32
-#define IRQ_SIC_MMCI0B 		(IRQ_SIC_START + SIC_INT_MMCI0B)
-#define IRQ_SIC_MMCI1B 		(IRQ_SIC_START + SIC_INT_MMCI1B)
-#define IRQ_SIC_KMI0		(IRQ_SIC_START + SIC_INT_KMI0)
-#define IRQ_SIC_KMI1		(IRQ_SIC_START + SIC_INT_KMI1)
-#define IRQ_SIC_SCI3		(IRQ_SIC_START + SIC_INT_SCI3)
-#define IRQ_SIC_UART3		(IRQ_SIC_START + SIC_INT_UART3)
-#define IRQ_SIC_CLCD		(IRQ_SIC_START + SIC_INT_CLCD)
-#define IRQ_SIC_TOUCH		(IRQ_SIC_START + SIC_INT_TOUCH)
-#define IRQ_SIC_KEYPAD 		(IRQ_SIC_START + SIC_INT_KEYPAD)
-#define IRQ_SIC_DoC		(IRQ_SIC_START + SIC_INT_DoC)
-#define IRQ_SIC_MMCI0A 		(IRQ_SIC_START + SIC_INT_MMCI0A)
-#define IRQ_SIC_MMCI1A 		(IRQ_SIC_START + SIC_INT_MMCI1A)
-#define IRQ_SIC_AACI		(IRQ_SIC_START + SIC_INT_AACI)
-#define IRQ_SIC_ETH		(IRQ_SIC_START + SIC_INT_ETH)
-#define IRQ_SIC_USB		(IRQ_SIC_START + SIC_INT_USB)
-#define IRQ_SIC_PCI0		(IRQ_SIC_START + SIC_INT_PCI0)
-#define IRQ_SIC_PCI1		(IRQ_SIC_START + SIC_INT_PCI1)
-#define IRQ_SIC_PCI2		(IRQ_SIC_START + SIC_INT_PCI2)
-#define IRQ_SIC_PCI3		(IRQ_SIC_START + SIC_INT_PCI3)
-#define IRQ_SIC_END		63
-
-#define SIC_IRQMASK_MMCI0B	SIC_INTMASK_MMCI0B
-#define SIC_IRQMASK_MMCI1B	SIC_INTMASK_MMCI1B
-#define SIC_IRQMASK_KMI0	SIC_INTMASK_KMI0
-#define SIC_IRQMASK_KMI1	SIC_INTMASK_KMI1
-#define SIC_IRQMASK_SCI3	SIC_INTMASK_SCI3
-#define SIC_IRQMASK_UART3	SIC_INTMASK_UART3
-#define SIC_IRQMASK_CLCD	SIC_INTMASK_CLCD
-#define SIC_IRQMASK_TOUCH	SIC_INTMASK_TOUCH
-#define SIC_IRQMASK_KEYPAD	SIC_INTMASK_KEYPAD
-#define SIC_IRQMASK_DoC		SIC_INTMASK_DoC
-#define SIC_IRQMASK_MMCI0A	SIC_INTMASK_MMCI0A
-#define SIC_IRQMASK_MMCI1A	SIC_INTMASK_MMCI1A
-#define SIC_IRQMASK_AACI	SIC_INTMASK_AACI
-#define SIC_IRQMASK_ETH		SIC_INTMASK_ETH
-#define SIC_IRQMASK_USB		SIC_INTMASK_USB
-#define SIC_IRQMASK_PCI0	SIC_INTMASK_PCI0
-#define SIC_IRQMASK_PCI1	SIC_INTMASK_PCI1
-#define SIC_IRQMASK_PCI2	SIC_INTMASK_PCI2
-#define SIC_IRQMASK_PCI3	SIC_INTMASK_PCI3
-
-#define NR_IRQS			64
diff --git a/include/asm-arm/arch-versatile/memory.h b/include/asm-arm/arch-versatile/memory.h
deleted file mode 100644
index a9370976cc5e..000000000000
--- a/include/asm-arm/arch-versatile/memory.h
+++ /dev/null
@@ -1,38 +0,0 @@
-/*
- *  linux/include/asm-arm/arch-versatile/memory.h
- *
- *  Copyright (C) 2003 ARM Limited
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-#ifndef __ASM_ARCH_MEMORY_H
-#define __ASM_ARCH_MEMORY_H
-
-/*
- * Physical DRAM offset.
- */
-#define PHYS_OFFSET	UL(0x00000000)
-
-/*
- * Virtual view <-> DMA view memory address translations
- * virt_to_bus: Used to translate the virtual address to an
- *              address suitable to be passed to set_dma_addr
- * bus_to_virt: Used to convert an address for DMA operations
- *              to an address that the kernel can use.
- */
-#define __virt_to_bus(x)	((x) - PAGE_OFFSET)
-#define __bus_to_virt(x)	((x) + PAGE_OFFSET)
-
-#endif
diff --git a/include/asm-arm/arch-versatile/platform.h b/include/asm-arm/arch-versatile/platform.h
deleted file mode 100644
index 2af9d7c9c63c..000000000000
--- a/include/asm-arm/arch-versatile/platform.h
+++ /dev/null
@@ -1,510 +0,0 @@
-/*
- * linux/include/asm-arm/arch-versatile/platform.h
- *
- * Copyright (c) ARM Limited 2003.  All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#ifndef __address_h
-#define __address_h                     1
-
-/*
- * Memory definitions
- */
-#define VERSATILE_BOOT_ROM_LO          0x30000000		/* DoC Base (64Mb)...*/
-#define VERSATILE_BOOT_ROM_HI          0x30000000
-#define VERSATILE_BOOT_ROM_BASE        VERSATILE_BOOT_ROM_HI	 /*  Normal position */
-#define VERSATILE_BOOT_ROM_SIZE        SZ_64M
-
-#define VERSATILE_SSRAM_BASE           /* VERSATILE_SSMC_BASE ? */
-#define VERSATILE_SSRAM_SIZE           SZ_2M
-
-#define VERSATILE_FLASH_BASE           0x34000000
-#define VERSATILE_FLASH_SIZE           SZ_64M
-
-/* 
- *  SDRAM
- */
-#define VERSATILE_SDRAM_BASE           0x00000000
-
-/* 
- *  Logic expansion modules
- * 
- */
-
-
-/* ------------------------------------------------------------------------
- *  Versatile Registers
- * ------------------------------------------------------------------------
- * 
- */
-#define VERSATILE_SYS_ID_OFFSET               0x00
-#define VERSATILE_SYS_SW_OFFSET               0x04
-#define VERSATILE_SYS_LED_OFFSET              0x08
-#define VERSATILE_SYS_OSC0_OFFSET             0x0C
-
-#if defined(CONFIG_ARCH_VERSATILE_PB)
-#define VERSATILE_SYS_OSC1_OFFSET             0x10
-#define VERSATILE_SYS_OSC2_OFFSET             0x14
-#define VERSATILE_SYS_OSC3_OFFSET             0x18
-#define VERSATILE_SYS_OSC4_OFFSET             0x1C
-#elif defined(CONFIG_MACH_VERSATILE_AB)
-#define VERSATILE_SYS_OSC1_OFFSET             0x1C
-#endif
-
-#define VERSATILE_SYS_OSCCLCD_OFFSET          0x1c
-
-#define VERSATILE_SYS_LOCK_OFFSET             0x20
-#define VERSATILE_SYS_100HZ_OFFSET            0x24
-#define VERSATILE_SYS_CFGDATA1_OFFSET         0x28
-#define VERSATILE_SYS_CFGDATA2_OFFSET         0x2C
-#define VERSATILE_SYS_FLAGS_OFFSET            0x30
-#define VERSATILE_SYS_FLAGSSET_OFFSET         0x30
-#define VERSATILE_SYS_FLAGSCLR_OFFSET         0x34
-#define VERSATILE_SYS_NVFLAGS_OFFSET          0x38
-#define VERSATILE_SYS_NVFLAGSSET_OFFSET       0x38
-#define VERSATILE_SYS_NVFLAGSCLR_OFFSET       0x3C
-#define VERSATILE_SYS_RESETCTL_OFFSET         0x40
-#define VERSATILE_SYS_PCICTL_OFFSET           0x44
-#define VERSATILE_SYS_MCI_OFFSET              0x48
-#define VERSATILE_SYS_FLASH_OFFSET            0x4C
-#define VERSATILE_SYS_CLCD_OFFSET             0x50
-#define VERSATILE_SYS_CLCDSER_OFFSET          0x54
-#define VERSATILE_SYS_BOOTCS_OFFSET           0x58
-#define VERSATILE_SYS_24MHz_OFFSET            0x5C
-#define VERSATILE_SYS_MISC_OFFSET             0x60
-#define VERSATILE_SYS_TEST_OSC0_OFFSET        0x80
-#define VERSATILE_SYS_TEST_OSC1_OFFSET        0x84
-#define VERSATILE_SYS_TEST_OSC2_OFFSET        0x88
-#define VERSATILE_SYS_TEST_OSC3_OFFSET        0x8C
-#define VERSATILE_SYS_TEST_OSC4_OFFSET        0x90
-
-#define VERSATILE_SYS_BASE                    0x10000000
-#define VERSATILE_SYS_ID                      (VERSATILE_SYS_BASE + VERSATILE_SYS_ID_OFFSET)
-#define VERSATILE_SYS_SW                      (VERSATILE_SYS_BASE + VERSATILE_SYS_SW_OFFSET)
-#define VERSATILE_SYS_LED                     (VERSATILE_SYS_BASE + VERSATILE_SYS_LED_OFFSET)
-#define VERSATILE_SYS_OSC0                    (VERSATILE_SYS_BASE + VERSATILE_SYS_OSC0_OFFSET)
-#define VERSATILE_SYS_OSC1                    (VERSATILE_SYS_BASE + VERSATILE_SYS_OSC1_OFFSET)
-
-#if defined(CONFIG_ARCH_VERSATILE_PB)
-#define VERSATILE_SYS_OSC2                    (VERSATILE_SYS_BASE + VERSATILE_SYS_OSC2_OFFSET)
-#define VERSATILE_SYS_OSC3                    (VERSATILE_SYS_BASE + VERSATILE_SYS_OSC3_OFFSET)
-#define VERSATILE_SYS_OSC4                    (VERSATILE_SYS_BASE + VERSATILE_SYS_OSC4_OFFSET)
-#endif
-
-#define VERSATILE_SYS_LOCK                    (VERSATILE_SYS_BASE + VERSATILE_SYS_LOCK_OFFSET)
-#define VERSATILE_SYS_100HZ                   (VERSATILE_SYS_BASE + VERSATILE_SYS_100HZ_OFFSET)
-#define VERSATILE_SYS_CFGDATA1                (VERSATILE_SYS_BASE + VERSATILE_SYS_CFGDATA1_OFFSET)
-#define VERSATILE_SYS_CFGDATA2                (VERSATILE_SYS_BASE + VERSATILE_SYS_CFGDATA2_OFFSET)
-#define VERSATILE_SYS_FLAGS                   (VERSATILE_SYS_BASE + VERSATILE_SYS_FLAGS_OFFSET)
-#define VERSATILE_SYS_FLAGSSET                (VERSATILE_SYS_BASE + VERSATILE_SYS_FLAGSSET_OFFSET)
-#define VERSATILE_SYS_FLAGSCLR                (VERSATILE_SYS_BASE + VERSATILE_SYS_FLAGSCLR_OFFSET)
-#define VERSATILE_SYS_NVFLAGS                 (VERSATILE_SYS_BASE + VERSATILE_SYS_NVFLAGS_OFFSET)
-#define VERSATILE_SYS_NVFLAGSSET              (VERSATILE_SYS_BASE + VERSATILE_SYS_NVFLAGSSET_OFFSET)
-#define VERSATILE_SYS_NVFLAGSCLR              (VERSATILE_SYS_BASE + VERSATILE_SYS_NVFLAGSCLR_OFFSET)
-#define VERSATILE_SYS_RESETCTL                (VERSATILE_SYS_BASE + VERSATILE_SYS_RESETCTL_OFFSET)
-#define VERSATILE_SYS_PCICTL                  (VERSATILE_SYS_BASE + VERSATILE_SYS_PCICTL_OFFSET)
-#define VERSATILE_SYS_MCI                     (VERSATILE_SYS_BASE + VERSATILE_SYS_MCI_OFFSET)
-#define VERSATILE_SYS_FLASH                   (VERSATILE_SYS_BASE + VERSATILE_SYS_FLASH_OFFSET)
-#define VERSATILE_SYS_CLCD                    (VERSATILE_SYS_BASE + VERSATILE_SYS_CLCD_OFFSET)
-#define VERSATILE_SYS_CLCDSER                 (VERSATILE_SYS_BASE + VERSATILE_SYS_CLCDSER_OFFSET)
-#define VERSATILE_SYS_BOOTCS                  (VERSATILE_SYS_BASE + VERSATILE_SYS_BOOTCS_OFFSET)
-#define VERSATILE_SYS_24MHz                   (VERSATILE_SYS_BASE + VERSATILE_SYS_24MHz_OFFSET)
-#define VERSATILE_SYS_MISC                    (VERSATILE_SYS_BASE + VERSATILE_SYS_MISC_OFFSET)
-#define VERSATILE_SYS_TEST_OSC0               (VERSATILE_SYS_BASE + VERSATILE_SYS_TEST_OSC0_OFFSET)
-#define VERSATILE_SYS_TEST_OSC1               (VERSATILE_SYS_BASE + VERSATILE_SYS_TEST_OSC1_OFFSET)
-#define VERSATILE_SYS_TEST_OSC2               (VERSATILE_SYS_BASE + VERSATILE_SYS_TEST_OSC2_OFFSET)
-#define VERSATILE_SYS_TEST_OSC3               (VERSATILE_SYS_BASE + VERSATILE_SYS_TEST_OSC3_OFFSET)
-#define VERSATILE_SYS_TEST_OSC4               (VERSATILE_SYS_BASE + VERSATILE_SYS_TEST_OSC4_OFFSET)
-
-/* 
- * Values for VERSATILE_SYS_RESET_CTRL
- */
-#define VERSATILE_SYS_CTRL_RESET_CONFIGCLR    0x01
-#define VERSATILE_SYS_CTRL_RESET_CONFIGINIT   0x02
-#define VERSATILE_SYS_CTRL_RESET_DLLRESET     0x03
-#define VERSATILE_SYS_CTRL_RESET_PLLRESET     0x04
-#define VERSATILE_SYS_CTRL_RESET_POR          0x05
-#define VERSATILE_SYS_CTRL_RESET_DoC          0x06
-
-#define VERSATILE_SYS_CTRL_LED         (1 << 0)
-
-
-/* ------------------------------------------------------------------------
- *  Versatile control registers
- * ------------------------------------------------------------------------
- */
-
-/* 
- * VERSATILE_IDFIELD
- *
- * 31:24 = manufacturer (0x41 = ARM)
- * 23:16 = architecture (0x08 = AHB system bus, ASB processor bus)
- * 15:12 = FPGA (0x3 = XVC600 or XVC600E)
- * 11:4  = build value
- * 3:0   = revision number (0x1 = rev B (AHB))
- */
-
-/*
- * VERSATILE_SYS_LOCK
- *     control access to SYS_OSCx, SYS_CFGDATAx, SYS_RESETCTL, 
- *     SYS_CLD, SYS_BOOTCS
- */
-#define VERSATILE_SYS_LOCK_LOCKED    (1 << 16)
-#define VERSATILE_SYS_LOCKVAL_MASK	0xFFFF		/* write 0xA05F to enable write access */
-
-/*
- * VERSATILE_SYS_FLASH
- */
-#define VERSATILE_FLASHPROG_FLVPPEN	(1 << 0)	/* Enable writing to flash */
-
-/*
- * VERSATILE_INTREG
- *     - used to acknowledge and control MMCI and UART interrupts 
- */
-#define VERSATILE_INTREG_WPROT        0x00    /* MMC protection status (no interrupt generated) */
-#define VERSATILE_INTREG_RI0          0x01    /* Ring indicator UART0 is asserted,              */
-#define VERSATILE_INTREG_CARDIN       0x08    /* MMCI card in detect                            */
-                                                /* write 1 to acknowledge and clear               */
-#define VERSATILE_INTREG_RI1          0x02    /* Ring indicator UART1 is asserted,              */
-#define VERSATILE_INTREG_CARDINSERT   0x03    /* Signal insertion of MMC card                   */
-
-/*
- * VERSATILE peripheral addresses
- */
-#define VERSATILE_PCI_CORE_BASE        0x10001000	/* PCI core control */
-#define VERSATILE_I2C_BASE             0x10002000	/* I2C control */
-#define VERSATILE_SIC_BASE             0x10003000	/* Secondary interrupt controller */
-#define VERSATILE_AACI_BASE            0x10004000	/* Audio */
-#define VERSATILE_MMCI0_BASE           0x10005000	/* MMC interface */
-#define VERSATILE_KMI0_BASE            0x10006000	/* KMI interface */
-#define VERSATILE_KMI1_BASE            0x10007000	/* KMI 2nd interface */
-#define VERSATILE_CHAR_LCD_BASE        0x10008000	/* Character LCD */
-#define VERSATILE_UART3_BASE           0x10009000	/* UART 3 */
-#define VERSATILE_SCI1_BASE            0x1000A000
-#define VERSATILE_MMCI1_BASE           0x1000B000    /* MMC Interface */
-	/* 0x1000C000 - 0x1000CFFF = reserved */
-#define VERSATILE_ETH_BASE             0x10010000	/* Ethernet */
-#define VERSATILE_USB_BASE             0x10020000	/* USB */
-	/* 0x10030000 - 0x100FFFFF = reserved */
-#define VERSATILE_SMC_BASE             0x10100000	/* SMC */
-#define VERSATILE_MPMC_BASE            0x10110000	/* MPMC */
-#define VERSATILE_CLCD_BASE            0x10120000	/* CLCD */
-#define VERSATILE_DMAC_BASE            0x10130000	/* DMA controller */
-#define VERSATILE_VIC_BASE             0x10140000	/* Vectored interrupt controller */
-#define VERSATILE_PERIPH_BASE          0x10150000    /* off-chip peripherals alias from */
-                                                /* 0x10000000 - 0x100FFFFF */
-#define VERSATILE_AHBM_BASE            0x101D0000	/* AHB monitor */
-#define VERSATILE_SCTL_BASE            0x101E0000	/* System controller */
-#define VERSATILE_WATCHDOG_BASE        0x101E1000	/* Watchdog */
-#define VERSATILE_TIMER0_1_BASE        0x101E2000	/* Timer 0 and 1 */
-#define VERSATILE_TIMER2_3_BASE        0x101E3000	/* Timer 2 and 3 */
-#define VERSATILE_GPIO0_BASE           0x101E4000	/* GPIO port 0 */
-#define VERSATILE_GPIO1_BASE           0x101E5000    /* GPIO port 1 */
-#define VERSATILE_GPIO2_BASE           0x101E6000	/* GPIO port 2 */
-#define VERSATILE_GPIO3_BASE           0x101E7000	/* GPIO port 3 */
-#define VERSATILE_RTC_BASE             0x101E8000	/* Real Time Clock */
-	/* 0x101E9000 - reserved */
-#define VERSATILE_SCI_BASE             0x101F0000	/* Smart card controller */
-#define VERSATILE_UART0_BASE           0x101F1000	/* Uart 0 */
-#define VERSATILE_UART1_BASE           0x101F2000	/* Uart 1 */
-#define VERSATILE_UART2_BASE           0x101F3000	/* Uart 2 */
-#define VERSATILE_SSP_BASE             0x101F4000	/* Synchronous Serial Port */
-
-#define VERSATILE_SSMC_BASE            0x20000000	/* SSMC */
-#define VERSATILE_IB2_BASE             0x24000000	/* IB2 module */
-#define VERSATILE_MBX_BASE             0x40000000	/* MBX */
-
-/* PCI space */
-#define VERSATILE_PCI_BASE             0x41000000	/* PCI Interface */
-#define VERSATILE_PCI_CFG_BASE	       0x42000000
-#define VERSATILE_PCI_MEM_BASE0        0x44000000
-#define VERSATILE_PCI_MEM_BASE1        0x50000000
-#define VERSATILE_PCI_MEM_BASE2        0x60000000
-/* Sizes of above maps */
-#define VERSATILE_PCI_BASE_SIZE	       0x01000000
-#define VERSATILE_PCI_CFG_BASE_SIZE    0x02000000
-#define VERSATILE_PCI_MEM_BASE0_SIZE   0x0c000000	/* 32Mb */
-#define VERSATILE_PCI_MEM_BASE1_SIZE   0x10000000	/* 256Mb */
-#define VERSATILE_PCI_MEM_BASE2_SIZE   0x10000000	/* 256Mb */
-
-#define VERSATILE_SDRAM67_BASE         0x70000000	/* SDRAM banks 6 and 7 */
-#define VERSATILE_LT_BASE              0x80000000	/* Logic Tile expansion */
-
-/*
- * Disk on Chip
- */
-#define VERSATILE_DOC_BASE             0x2C000000
-#define VERSATILE_DOC_SIZE             (16 << 20)
-#define VERSATILE_DOC_PAGE_SIZE        512
-#define VERSATILE_DOC_TOTAL_PAGES     (DOC_SIZE / PAGE_SIZE)
-
-#define ERASE_UNIT_PAGES    32
-#define START_PAGE          0x80
-
-/* 
- *  LED settings, bits [7:0]
- */
-#define VERSATILE_SYS_LED0             (1 << 0)
-#define VERSATILE_SYS_LED1             (1 << 1)
-#define VERSATILE_SYS_LED2             (1 << 2)
-#define VERSATILE_SYS_LED3             (1 << 3)
-#define VERSATILE_SYS_LED4             (1 << 4)
-#define VERSATILE_SYS_LED5             (1 << 5)
-#define VERSATILE_SYS_LED6             (1 << 6)
-#define VERSATILE_SYS_LED7             (1 << 7)
-
-#define ALL_LEDS                  0xFF
-
-#define LED_BANK                  VERSATILE_SYS_LED
-
-/* 
- * Control registers
- */
-#define VERSATILE_IDFIELD_OFFSET	0x0	/* Versatile build information */
-#define VERSATILE_FLASHPROG_OFFSET	0x4	/* Flash devices */
-#define VERSATILE_INTREG_OFFSET		0x8	/* Interrupt control */
-#define VERSATILE_DECODE_OFFSET		0xC	/* Fitted logic modules */
-
-
-/* ------------------------------------------------------------------------
- *  Versatile Interrupt Controller - control registers
- * ------------------------------------------------------------------------
- * 
- *  Offsets from interrupt controller base 
- * 
- *  System Controller interrupt controller base is
- * 
- * 	VERSATILE_IC_BASE
- * 
- *  Core Module interrupt controller base is
- * 
- * 	VERSATILE_SYS_IC 
- * 
- */
-/* VIC definitions in include/asm-arm/hardware/vic.h */
-
-#define SIC_IRQ_STATUS                  0
-#define SIC_IRQ_RAW_STATUS              0x04
-#define SIC_IRQ_ENABLE                  0x08
-#define SIC_IRQ_ENABLE_SET              0x08
-#define SIC_IRQ_ENABLE_CLEAR            0x0C
-#define SIC_INT_SOFT_SET                0x10
-#define SIC_INT_SOFT_CLEAR              0x14
-#define SIC_INT_PIC_ENABLE              0x20	/* read status of pass through mask */
-#define SIC_INT_PIC_ENABLES             0x20	/* set interrupt pass through bits */
-#define SIC_INT_PIC_ENABLEC             0x24	/* Clear interrupt pass through bits */
-
-/* ------------------------------------------------------------------------
- *  Interrupts - bit assignment (primary)
- * ------------------------------------------------------------------------
- */
-
-#define INT_WDOGINT                     0	/* Watchdog timer */
-#define INT_SOFTINT                     1	/* Software interrupt */
-#define INT_COMMRx                      2	/* Debug Comm Rx interrupt */
-#define INT_COMMTx                      3	/* Debug Comm Tx interrupt */
-#define INT_TIMERINT0_1                 4	/* Timer 0 and 1 */
-#define INT_TIMERINT2_3                 5	/* Timer 2 and 3 */
-#define INT_GPIOINT0                    6	/* GPIO 0 */
-#define INT_GPIOINT1                    7	/* GPIO 1 */
-#define INT_GPIOINT2                    8	/* GPIO 2 */
-#define INT_GPIOINT3                    9	/* GPIO 3 */
-#define INT_RTCINT                      10	/* Real Time Clock */
-#define INT_SSPINT                      11	/* Synchronous Serial Port */
-#define INT_UARTINT0                    12	/* UART 0 on development chip */
-#define INT_UARTINT1                    13	/* UART 1 on development chip */
-#define INT_UARTINT2                    14	/* UART 2 on development chip */
-#define INT_SCIINT                      15	/* Smart Card Interface */
-#define INT_CLCDINT                     16	/* CLCD controller */
-#define INT_DMAINT                      17	/* DMA controller */
-#define INT_PWRFAILINT                  18	/* Power failure */
-#define INT_MBXINT                      19	/* Graphics processor */
-#define INT_GNDINT                      20	/* Reserved */
-	/* External interrupt signals from logic tiles or secondary controller */
-#define INT_VICSOURCE21                 21	/* Disk on Chip */
-#define INT_VICSOURCE22                 22	/* MCI0A */
-#define INT_VICSOURCE23                 23	/* MCI1A */
-#define INT_VICSOURCE24                 24	/* AACI */
-#define INT_VICSOURCE25                 25	/* Ethernet */
-#define INT_VICSOURCE26                 26	/* USB */
-#define INT_VICSOURCE27                 27	/* PCI 0 */
-#define INT_VICSOURCE28                 28	/* PCI 1 */
-#define INT_VICSOURCE29                 29	/* PCI 2 */
-#define INT_VICSOURCE30                 30	/* PCI 3 */
-#define INT_VICSOURCE31                 31	/* SIC source */
-
-/* 
- *  Interrupt bit positions
- * 
- */
-#define INTMASK_WDOGINT                 (1 << INT_WDOGINT)
-#define INTMASK_SOFTINT                 (1 << INT_SOFTINT)
-#define INTMASK_COMMRx                  (1 << INT_COMMRx)
-#define INTMASK_COMMTx                  (1 << INT_COMMTx)
-#define INTMASK_TIMERINT0_1             (1 << INT_TIMERINT0_1)
-#define INTMASK_TIMERINT2_3             (1 << INT_TIMERINT2_3)
-#define INTMASK_GPIOINT0                (1 << INT_GPIOINT0)
-#define INTMASK_GPIOINT1                (1 << INT_GPIOINT1)
-#define INTMASK_GPIOINT2                (1 << INT_GPIOINT2)
-#define INTMASK_GPIOINT3                (1 << INT_GPIOINT3)
-#define INTMASK_RTCINT                  (1 << INT_RTCINT)
-#define INTMASK_SSPINT                  (1 << INT_SSPINT)
-#define INTMASK_UARTINT0                (1 << INT_UARTINT0)
-#define INTMASK_UARTINT1                (1 << INT_UARTINT1)
-#define INTMASK_UARTINT2                (1 << INT_UARTINT2)
-#define INTMASK_SCIINT                  (1 << INT_SCIINT)
-#define INTMASK_CLCDINT                 (1 << INT_CLCDINT)
-#define INTMASK_DMAINT                  (1 << INT_DMAINT)
-#define INTMASK_PWRFAILINT              (1 << INT_PWRFAILINT)
-#define INTMASK_MBXINT                  (1 << INT_MBXINT)
-#define INTMASK_GNDINT                  (1 << INT_GNDINT)
-#define INTMASK_VICSOURCE21             (1 << INT_VICSOURCE21)
-#define INTMASK_VICSOURCE22             (1 << INT_VICSOURCE22)
-#define INTMASK_VICSOURCE23             (1 << INT_VICSOURCE23)
-#define INTMASK_VICSOURCE24             (1 << INT_VICSOURCE24)
-#define INTMASK_VICSOURCE25             (1 << INT_VICSOURCE25)
-#define INTMASK_VICSOURCE26             (1 << INT_VICSOURCE26)
-#define INTMASK_VICSOURCE27             (1 << INT_VICSOURCE27)
-#define INTMASK_VICSOURCE28             (1 << INT_VICSOURCE28)
-#define INTMASK_VICSOURCE29             (1 << INT_VICSOURCE29)
-#define INTMASK_VICSOURCE30             (1 << INT_VICSOURCE30)
-#define INTMASK_VICSOURCE31             (1 << INT_VICSOURCE31)
-
-
-#define VERSATILE_SC_VALID_INT               0x003FFFFF
-
-#define MAXIRQNUM                       31
-#define MAXFIQNUM                       31
-#define MAXSWINUM                       31
-
-/* ------------------------------------------------------------------------
- *  Interrupts - bit assignment (secondary)
- * ------------------------------------------------------------------------
- */
-#define SIC_INT_MMCI0B                  1	/* Multimedia Card 0B */
-#define SIC_INT_MMCI1B                  2	/* Multimedia Card 1B */
-#define SIC_INT_KMI0                    3	/* Keyboard/Mouse port 0 */
-#define SIC_INT_KMI1                    4	/* Keyboard/Mouse port 1 */
-#define SIC_INT_SCI3                    5	/* Smart Card interface */
-#define SIC_INT_UART3                   6	/* UART 3 empty or data available */
-#define SIC_INT_CLCD                    7	/* Character LCD */
-#define SIC_INT_TOUCH                   8	/* Touchscreen */
-#define SIC_INT_KEYPAD                  9	/* Key pressed on display keypad */
-	/* 10:20 - reserved */
-#define SIC_INT_DoC                     21	/* Disk on Chip memory controller */
-#define SIC_INT_MMCI0A                  22	/* MMC 0A */
-#define SIC_INT_MMCI1A                  23	/* MMC 1A */
-#define SIC_INT_AACI                    24	/* Audio Codec */
-#define SIC_INT_ETH                     25	/* Ethernet controller */
-#define SIC_INT_USB                     26	/* USB controller */
-#define SIC_INT_PCI0                    27
-#define SIC_INT_PCI1                    28
-#define SIC_INT_PCI2                    29
-#define SIC_INT_PCI3                    30
-
-
-#define SIC_INTMASK_MMCI0B              (1 << SIC_INT_MMCI0B)
-#define SIC_INTMASK_MMCI1B              (1 << SIC_INT_MMCI1B)
-#define SIC_INTMASK_KMI0                (1 << SIC_INT_KMI0)
-#define SIC_INTMASK_KMI1                (1 << SIC_INT_KMI1)
-#define SIC_INTMASK_SCI3                (1 << SIC_INT_SCI3)
-#define SIC_INTMASK_UART3               (1 << SIC_INT_UART3)
-#define SIC_INTMASK_CLCD                (1 << SIC_INT_CLCD)
-#define SIC_INTMASK_TOUCH               (1 << SIC_INT_TOUCH)
-#define SIC_INTMASK_KEYPAD              (1 << SIC_INT_KEYPAD)
-#define SIC_INTMASK_DoC                 (1 << SIC_INT_DoC)
-#define SIC_INTMASK_MMCI0A              (1 << SIC_INT_MMCI0A)
-#define SIC_INTMASK_MMCI1A              (1 << SIC_INT_MMCI1A)
-#define SIC_INTMASK_AACI                (1 << SIC_INT_AACI)
-#define SIC_INTMASK_ETH                 (1 << SIC_INT_ETH)
-#define SIC_INTMASK_USB                 (1 << SIC_INT_USB)
-#define SIC_INTMASK_PCI0                (1 << SIC_INT_PCI0)
-#define SIC_INTMASK_PCI1                (1 << SIC_INT_PCI1)
-#define SIC_INTMASK_PCI2                (1 << SIC_INT_PCI2)
-#define SIC_INTMASK_PCI3                (1 << SIC_INT_PCI3)
-/* 
- *  Application Flash
- * 
- */
-#define FLASH_BASE                      VERSATILE_FLASH_BASE
-#define FLASH_SIZE                      VERSATILE_FLASH_SIZE
-#define FLASH_END                       (FLASH_BASE + FLASH_SIZE - 1)
-#define FLASH_BLOCK_SIZE                SZ_128K
-
-/* 
- *  Boot Flash
- * 
- */
-#define EPROM_BASE                      VERSATILE_BOOT_ROM_HI
-#define EPROM_SIZE                      VERSATILE_BOOT_ROM_SIZE
-#define EPROM_END                       (EPROM_BASE + EPROM_SIZE - 1)
-
-/* 
- *  Clean base - dummy
- * 
- */
-#define CLEAN_BASE                      EPROM_BASE
-
-/*
- * System controller bit assignment
- */
-#define VERSATILE_REFCLK	0
-#define VERSATILE_TIMCLK	1
-
-#define VERSATILE_TIMER1_EnSel	15
-#define VERSATILE_TIMER2_EnSel	17
-#define VERSATILE_TIMER3_EnSel	19
-#define VERSATILE_TIMER4_EnSel	21
-
-
-#define MAX_TIMER                       2
-#define MAX_PERIOD                      699050
-#define TICKS_PER_uSEC                  1
-
-/* 
- *  These are useconds NOT ticks.  
- * 
- */
-#define mSEC_1                          1000
-#define mSEC_5                          (mSEC_1 * 5)
-#define mSEC_10                         (mSEC_1 * 10)
-#define mSEC_25                         (mSEC_1 * 25)
-#define SEC_1                           (mSEC_1 * 1000)
-
-#define VERSATILE_CSR_BASE             0x10000000
-#define VERSATILE_CSR_SIZE             0x10000000
-
-#ifdef CONFIG_MACH_VERSATILE_AB
-/*
- * IB2 Versatile/AB expansion board definitions
- */
-#define VERSATILE_IB2_CAMERA_BANK	VERSATILE_IB2_BASE
-#define VERSATILE_IB2_KBD_DATAREG	(VERSATILE_IB2_BASE + 0x01000000)
-
-/* VICINTSOURCE27 */
-#define VERSATILE_IB2_INT_BASE		(VERSATILE_IB2_BASE + 0x02000000)
-#define VERSATILE_IB2_IER		(VERSATILE_IB2_INT_BASE + 0)
-#define VERSATILE_IB2_ISR		(VERSATILE_IB2_INT_BASE + 4)
-
-#define VERSATILE_IB2_CTL_BASE		(VERSATILE_IB2_BASE + 0x03000000)
-#define VERSATILE_IB2_CTRL		(VERSATILE_IB2_CTL_BASE + 0)
-#define VERSATILE_IB2_STAT		(VERSATILE_IB2_CTL_BASE + 4)
-#endif
-
-#endif
-
-/* 	END */
diff --git a/include/asm-arm/arch-versatile/system.h b/include/asm-arm/arch-versatile/system.h
deleted file mode 100644
index 71c6254c0d9b..000000000000
--- a/include/asm-arm/arch-versatile/system.h
+++ /dev/null
@@ -1,49 +0,0 @@
-/*
- *  linux/include/asm-arm/arch-versatile/system.h
- *
- *  Copyright (C) 2003 ARM Limited
- *  Copyright (C) 2000 Deep Blue Solutions Ltd
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-#ifndef __ASM_ARCH_SYSTEM_H
-#define __ASM_ARCH_SYSTEM_H
-
-#include <asm/hardware.h>
-#include <asm/io.h>
-#include <asm/arch/platform.h>
-
-static inline void arch_idle(void)
-{
-	/*
-	 * This should do all the clock switching
-	 * and wait for interrupt tricks
-	 */
-	cpu_do_idle();
-}
-
-static inline void arch_reset(char mode)
-{
-	u32 val;
-
-	val = __raw_readl(IO_ADDRESS(VERSATILE_SYS_RESETCTL)) & ~0x7;
-	val |= 0x105;
-
-	__raw_writel(0xa05f, IO_ADDRESS(VERSATILE_SYS_LOCK));
-	__raw_writel(val, IO_ADDRESS(VERSATILE_SYS_RESETCTL));
-	__raw_writel(0, IO_ADDRESS(VERSATILE_SYS_LOCK));
-}
-
-#endif
diff --git a/include/asm-arm/arch-versatile/timex.h b/include/asm-arm/arch-versatile/timex.h
deleted file mode 100644
index 38fd04fc9141..000000000000
--- a/include/asm-arm/arch-versatile/timex.h
+++ /dev/null
@@ -1,23 +0,0 @@
-/*
- *  linux/include/asm-arm/arch-versatile/timex.h
- *
- *  Versatile architecture timex specifications
- *
- *  Copyright (C) 2003 ARM Limited
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#define CLOCK_TICK_RATE		(50000000 / 16)
diff --git a/include/asm-arm/arch-versatile/uncompress.h b/include/asm-arm/arch-versatile/uncompress.h
deleted file mode 100644
index 7215133d0514..000000000000
--- a/include/asm-arm/arch-versatile/uncompress.h
+++ /dev/null
@@ -1,46 +0,0 @@
-/*
- *  linux/include/asm-arm/arch-versatile/uncompress.h
- *
- *  Copyright (C) 2003 ARM Limited
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-#define AMBA_UART_DR	(*(volatile unsigned char *)0x101F1000)
-#define AMBA_UART_LCRH	(*(volatile unsigned char *)0x101F102C)
-#define AMBA_UART_CR	(*(volatile unsigned char *)0x101F1030)
-#define AMBA_UART_FR	(*(volatile unsigned char *)0x101F1018)
-
-/*
- * This does not append a newline
- */
-static inline void putc(int c)
-{
-	while (AMBA_UART_FR & (1 << 5))
-		barrier();
-
-	AMBA_UART_DR = c;
-}
-
-static inline void flush(void)
-{
-	while (AMBA_UART_FR & (1 << 3))
-		barrier();
-}
-
-/*
- * nothing to do
- */
-#define arch_decomp_setup()
-#define arch_decomp_wdog()
diff --git a/include/asm-arm/arch-versatile/vmalloc.h b/include/asm-arm/arch-versatile/vmalloc.h
deleted file mode 100644
index ac780df62156..000000000000
--- a/include/asm-arm/arch-versatile/vmalloc.h
+++ /dev/null
@@ -1,21 +0,0 @@
-/*
- *  linux/include/asm-arm/arch-versatile/vmalloc.h
- *
- *  Copyright (C) 2003 ARM Limited
- *  Copyright (C) 2000 Russell King.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-#define VMALLOC_END		(PAGE_OFFSET + 0x18000000)
diff --git a/include/asm-arm/atomic.h b/include/asm-arm/atomic.h
deleted file mode 100644
index 3b59f94b5a3d..000000000000
--- a/include/asm-arm/atomic.h
+++ /dev/null
@@ -1,212 +0,0 @@
-/*
- *  linux/include/asm-arm/atomic.h
- *
- *  Copyright (C) 1996 Russell King.
- *  Copyright (C) 2002 Deep Blue Solutions Ltd.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#ifndef __ASM_ARM_ATOMIC_H
-#define __ASM_ARM_ATOMIC_H
-
-#include <linux/compiler.h>
-#include <asm/system.h>
-
-typedef struct { volatile int counter; } atomic_t;
-
-#define ATOMIC_INIT(i)	{ (i) }
-
-#ifdef __KERNEL__
-
-#define atomic_read(v)	((v)->counter)
-
-#if __LINUX_ARM_ARCH__ >= 6
-
-/*
- * ARMv6 UP and SMP safe atomic ops.  We use load exclusive and
- * store exclusive to ensure that these are atomic.  We may loop
- * to ensure that the update happens.  Writing to 'v->counter'
- * without using the following operations WILL break the atomic
- * nature of these ops.
- */
-static inline void atomic_set(atomic_t *v, int i)
-{
-	unsigned long tmp;
-
-	__asm__ __volatile__("@ atomic_set\n"
-"1:	ldrex	%0, [%1]\n"
-"	strex	%0, %2, [%1]\n"
-"	teq	%0, #0\n"
-"	bne	1b"
-	: "=&r" (tmp)
-	: "r" (&v->counter), "r" (i)
-	: "cc");
-}
-
-static inline int atomic_add_return(int i, atomic_t *v)
-{
-	unsigned long tmp;
-	int result;
-
-	__asm__ __volatile__("@ atomic_add_return\n"
-"1:	ldrex	%0, [%2]\n"
-"	add	%0, %0, %3\n"
-"	strex	%1, %0, [%2]\n"
-"	teq	%1, #0\n"
-"	bne	1b"
-	: "=&r" (result), "=&r" (tmp)
-	: "r" (&v->counter), "Ir" (i)
-	: "cc");
-
-	return result;
-}
-
-static inline int atomic_sub_return(int i, atomic_t *v)
-{
-	unsigned long tmp;
-	int result;
-
-	__asm__ __volatile__("@ atomic_sub_return\n"
-"1:	ldrex	%0, [%2]\n"
-"	sub	%0, %0, %3\n"
-"	strex	%1, %0, [%2]\n"
-"	teq	%1, #0\n"
-"	bne	1b"
-	: "=&r" (result), "=&r" (tmp)
-	: "r" (&v->counter), "Ir" (i)
-	: "cc");
-
-	return result;
-}
-
-static inline int atomic_cmpxchg(atomic_t *ptr, int old, int new)
-{
-	unsigned long oldval, res;
-
-	do {
-		__asm__ __volatile__("@ atomic_cmpxchg\n"
-		"ldrex	%1, [%2]\n"
-		"mov	%0, #0\n"
-		"teq	%1, %3\n"
-		"strexeq %0, %4, [%2]\n"
-		    : "=&r" (res), "=&r" (oldval)
-		    : "r" (&ptr->counter), "Ir" (old), "r" (new)
-		    : "cc");
-	} while (res);
-
-	return oldval;
-}
-
-static inline void atomic_clear_mask(unsigned long mask, unsigned long *addr)
-{
-	unsigned long tmp, tmp2;
-
-	__asm__ __volatile__("@ atomic_clear_mask\n"
-"1:	ldrex	%0, [%2]\n"
-"	bic	%0, %0, %3\n"
-"	strex	%1, %0, [%2]\n"
-"	teq	%1, #0\n"
-"	bne	1b"
-	: "=&r" (tmp), "=&r" (tmp2)
-	: "r" (addr), "Ir" (mask)
-	: "cc");
-}
-
-#else /* ARM_ARCH_6 */
-
-#include <asm/system.h>
-
-#ifdef CONFIG_SMP
-#error SMP not supported on pre-ARMv6 CPUs
-#endif
-
-#define atomic_set(v,i)	(((v)->counter) = (i))
-
-static inline int atomic_add_return(int i, atomic_t *v)
-{
-	unsigned long flags;
-	int val;
-
-	raw_local_irq_save(flags);
-	val = v->counter;
-	v->counter = val += i;
-	raw_local_irq_restore(flags);
-
-	return val;
-}
-
-static inline int atomic_sub_return(int i, atomic_t *v)
-{
-	unsigned long flags;
-	int val;
-
-	raw_local_irq_save(flags);
-	val = v->counter;
-	v->counter = val -= i;
-	raw_local_irq_restore(flags);
-
-	return val;
-}
-
-static inline int atomic_cmpxchg(atomic_t *v, int old, int new)
-{
-	int ret;
-	unsigned long flags;
-
-	raw_local_irq_save(flags);
-	ret = v->counter;
-	if (likely(ret == old))
-		v->counter = new;
-	raw_local_irq_restore(flags);
-
-	return ret;
-}
-
-static inline void atomic_clear_mask(unsigned long mask, unsigned long *addr)
-{
-	unsigned long flags;
-
-	raw_local_irq_save(flags);
-	*addr &= ~mask;
-	raw_local_irq_restore(flags);
-}
-
-#endif /* __LINUX_ARM_ARCH__ */
-
-#define atomic_xchg(v, new) (xchg(&((v)->counter), new))
-
-static inline int atomic_add_unless(atomic_t *v, int a, int u)
-{
-	int c, old;
-
-	c = atomic_read(v);
-	while (c != u && (old = atomic_cmpxchg((v), c, c + a)) != c)
-		c = old;
-	return c != u;
-}
-#define atomic_inc_not_zero(v) atomic_add_unless((v), 1, 0)
-
-#define atomic_add(i, v)	(void) atomic_add_return(i, v)
-#define atomic_inc(v)		(void) atomic_add_return(1, v)
-#define atomic_sub(i, v)	(void) atomic_sub_return(i, v)
-#define atomic_dec(v)		(void) atomic_sub_return(1, v)
-
-#define atomic_inc_and_test(v)	(atomic_add_return(1, v) == 0)
-#define atomic_dec_and_test(v)	(atomic_sub_return(1, v) == 0)
-#define atomic_inc_return(v)    (atomic_add_return(1, v))
-#define atomic_dec_return(v)    (atomic_sub_return(1, v))
-#define atomic_sub_and_test(i, v) (atomic_sub_return(i, v) == 0)
-
-#define atomic_add_negative(i,v) (atomic_add_return(i, v) < 0)
-
-/* Atomic operations are already serializing on ARM */
-#define smp_mb__before_atomic_dec()	barrier()
-#define smp_mb__after_atomic_dec()	barrier()
-#define smp_mb__before_atomic_inc()	barrier()
-#define smp_mb__after_atomic_inc()	barrier()
-
-#include <asm-generic/atomic.h>
-#endif
-#endif
diff --git a/include/asm-arm/bitops.h b/include/asm-arm/bitops.h
deleted file mode 100644
index 5c60bfc1a84d..000000000000
--- a/include/asm-arm/bitops.h
+++ /dev/null
@@ -1,333 +0,0 @@
-/*
- * Copyright 1995, Russell King.
- * Various bits and pieces copyrights include:
- *  Linus Torvalds (test_bit).
- * Big endian support: Copyright 2001, Nicolas Pitre
- *  reworked by rmk.
- *
- * bit 0 is the LSB of an "unsigned long" quantity.
- *
- * Please note that the code in this file should never be included
- * from user space.  Many of these are not implemented in assembler
- * since they would be too costly.  Also, they require privileged
- * instructions (which are not available from user mode) to ensure
- * that they are atomic.
- */
-
-#ifndef __ASM_ARM_BITOPS_H
-#define __ASM_ARM_BITOPS_H
-
-#ifdef __KERNEL__
-
-#ifndef _LINUX_BITOPS_H
-#error only <linux/bitops.h> can be included directly
-#endif
-
-#include <linux/compiler.h>
-#include <asm/system.h>
-
-#define smp_mb__before_clear_bit()	mb()
-#define smp_mb__after_clear_bit()	mb()
-
-/*
- * These functions are the basis of our bit ops.
- *
- * First, the atomic bitops. These use native endian.
- */
-static inline void ____atomic_set_bit(unsigned int bit, volatile unsigned long *p)
-{
-	unsigned long flags;
-	unsigned long mask = 1UL << (bit & 31);
-
-	p += bit >> 5;
-
-	raw_local_irq_save(flags);
-	*p |= mask;
-	raw_local_irq_restore(flags);
-}
-
-static inline void ____atomic_clear_bit(unsigned int bit, volatile unsigned long *p)
-{
-	unsigned long flags;
-	unsigned long mask = 1UL << (bit & 31);
-
-	p += bit >> 5;
-
-	raw_local_irq_save(flags);
-	*p &= ~mask;
-	raw_local_irq_restore(flags);
-}
-
-static inline void ____atomic_change_bit(unsigned int bit, volatile unsigned long *p)
-{
-	unsigned long flags;
-	unsigned long mask = 1UL << (bit & 31);
-
-	p += bit >> 5;
-
-	raw_local_irq_save(flags);
-	*p ^= mask;
-	raw_local_irq_restore(flags);
-}
-
-static inline int
-____atomic_test_and_set_bit(unsigned int bit, volatile unsigned long *p)
-{
-	unsigned long flags;
-	unsigned int res;
-	unsigned long mask = 1UL << (bit & 31);
-
-	p += bit >> 5;
-
-	raw_local_irq_save(flags);
-	res = *p;
-	*p = res | mask;
-	raw_local_irq_restore(flags);
-
-	return res & mask;
-}
-
-static inline int
-____atomic_test_and_clear_bit(unsigned int bit, volatile unsigned long *p)
-{
-	unsigned long flags;
-	unsigned int res;
-	unsigned long mask = 1UL << (bit & 31);
-
-	p += bit >> 5;
-
-	raw_local_irq_save(flags);
-	res = *p;
-	*p = res & ~mask;
-	raw_local_irq_restore(flags);
-
-	return res & mask;
-}
-
-static inline int
-____atomic_test_and_change_bit(unsigned int bit, volatile unsigned long *p)
-{
-	unsigned long flags;
-	unsigned int res;
-	unsigned long mask = 1UL << (bit & 31);
-
-	p += bit >> 5;
-
-	raw_local_irq_save(flags);
-	res = *p;
-	*p = res ^ mask;
-	raw_local_irq_restore(flags);
-
-	return res & mask;
-}
-
-#include <asm-generic/bitops/non-atomic.h>
-
-/*
- *  A note about Endian-ness.
- *  -------------------------
- *
- * When the ARM is put into big endian mode via CR15, the processor
- * merely swaps the order of bytes within words, thus:
- *
- *          ------------ physical data bus bits -----------
- *          D31 ... D24  D23 ... D16  D15 ... D8  D7 ... D0
- * little     byte 3       byte 2       byte 1      byte 0
- * big        byte 0       byte 1       byte 2      byte 3
- *
- * This means that reading a 32-bit word at address 0 returns the same
- * value irrespective of the endian mode bit.
- *
- * Peripheral devices should be connected with the data bus reversed in
- * "Big Endian" mode.  ARM Application Note 61 is applicable, and is
- * available from http://www.arm.com/.
- *
- * The following assumes that the data bus connectivity for big endian
- * mode has been followed.
- *
- * Note that bit 0 is defined to be 32-bit word bit 0, not byte 0 bit 0.
- */
-
-/*
- * Little endian assembly bitops.  nr = 0 -> byte 0 bit 0.
- */
-extern void _set_bit_le(int nr, volatile unsigned long * p);
-extern void _clear_bit_le(int nr, volatile unsigned long * p);
-extern void _change_bit_le(int nr, volatile unsigned long * p);
-extern int _test_and_set_bit_le(int nr, volatile unsigned long * p);
-extern int _test_and_clear_bit_le(int nr, volatile unsigned long * p);
-extern int _test_and_change_bit_le(int nr, volatile unsigned long * p);
-extern int _find_first_zero_bit_le(const void * p, unsigned size);
-extern int _find_next_zero_bit_le(const void * p, int size, int offset);
-extern int _find_first_bit_le(const unsigned long *p, unsigned size);
-extern int _find_next_bit_le(const unsigned long *p, int size, int offset);
-
-/*
- * Big endian assembly bitops.  nr = 0 -> byte 3 bit 0.
- */
-extern void _set_bit_be(int nr, volatile unsigned long * p);
-extern void _clear_bit_be(int nr, volatile unsigned long * p);
-extern void _change_bit_be(int nr, volatile unsigned long * p);
-extern int _test_and_set_bit_be(int nr, volatile unsigned long * p);
-extern int _test_and_clear_bit_be(int nr, volatile unsigned long * p);
-extern int _test_and_change_bit_be(int nr, volatile unsigned long * p);
-extern int _find_first_zero_bit_be(const void * p, unsigned size);
-extern int _find_next_zero_bit_be(const void * p, int size, int offset);
-extern int _find_first_bit_be(const unsigned long *p, unsigned size);
-extern int _find_next_bit_be(const unsigned long *p, int size, int offset);
-
-#ifndef CONFIG_SMP
-/*
- * The __* form of bitops are non-atomic and may be reordered.
- */
-#define	ATOMIC_BITOP_LE(name,nr,p)		\
-	(__builtin_constant_p(nr) ?		\
-	 ____atomic_##name(nr, p) :		\
-	 _##name##_le(nr,p))
-
-#define	ATOMIC_BITOP_BE(name,nr,p)		\
-	(__builtin_constant_p(nr) ?		\
-	 ____atomic_##name(nr, p) :		\
-	 _##name##_be(nr,p))
-#else
-#define ATOMIC_BITOP_LE(name,nr,p)	_##name##_le(nr,p)
-#define ATOMIC_BITOP_BE(name,nr,p)	_##name##_be(nr,p)
-#endif
-
-#define NONATOMIC_BITOP(name,nr,p)		\
-	(____nonatomic_##name(nr, p))
-
-#ifndef __ARMEB__
-/*
- * These are the little endian, atomic definitions.
- */
-#define set_bit(nr,p)			ATOMIC_BITOP_LE(set_bit,nr,p)
-#define clear_bit(nr,p)			ATOMIC_BITOP_LE(clear_bit,nr,p)
-#define change_bit(nr,p)		ATOMIC_BITOP_LE(change_bit,nr,p)
-#define test_and_set_bit(nr,p)		ATOMIC_BITOP_LE(test_and_set_bit,nr,p)
-#define test_and_clear_bit(nr,p)	ATOMIC_BITOP_LE(test_and_clear_bit,nr,p)
-#define test_and_change_bit(nr,p)	ATOMIC_BITOP_LE(test_and_change_bit,nr,p)
-#define find_first_zero_bit(p,sz)	_find_first_zero_bit_le(p,sz)
-#define find_next_zero_bit(p,sz,off)	_find_next_zero_bit_le(p,sz,off)
-#define find_first_bit(p,sz)		_find_first_bit_le(p,sz)
-#define find_next_bit(p,sz,off)		_find_next_bit_le(p,sz,off)
-
-#define WORD_BITOFF_TO_LE(x)		((x))
-
-#else
-
-/*
- * These are the big endian, atomic definitions.
- */
-#define set_bit(nr,p)			ATOMIC_BITOP_BE(set_bit,nr,p)
-#define clear_bit(nr,p)			ATOMIC_BITOP_BE(clear_bit,nr,p)
-#define change_bit(nr,p)		ATOMIC_BITOP_BE(change_bit,nr,p)
-#define test_and_set_bit(nr,p)		ATOMIC_BITOP_BE(test_and_set_bit,nr,p)
-#define test_and_clear_bit(nr,p)	ATOMIC_BITOP_BE(test_and_clear_bit,nr,p)
-#define test_and_change_bit(nr,p)	ATOMIC_BITOP_BE(test_and_change_bit,nr,p)
-#define find_first_zero_bit(p,sz)	_find_first_zero_bit_be(p,sz)
-#define find_next_zero_bit(p,sz,off)	_find_next_zero_bit_be(p,sz,off)
-#define find_first_bit(p,sz)		_find_first_bit_be(p,sz)
-#define find_next_bit(p,sz,off)		_find_next_bit_be(p,sz,off)
-
-#define WORD_BITOFF_TO_LE(x)		((x) ^ 0x18)
-
-#endif
-
-#if __LINUX_ARM_ARCH__ < 5
-
-#include <asm-generic/bitops/ffz.h>
-#include <asm-generic/bitops/__ffs.h>
-#include <asm-generic/bitops/fls.h>
-#include <asm-generic/bitops/ffs.h>
-
-#else
-
-static inline int constant_fls(int x)
-{
-	int r = 32;
-
-	if (!x)
-		return 0;
-	if (!(x & 0xffff0000u)) {
-		x <<= 16;
-		r -= 16;
-	}
-	if (!(x & 0xff000000u)) {
-		x <<= 8;
-		r -= 8;
-	}
-	if (!(x & 0xf0000000u)) {
-		x <<= 4;
-		r -= 4;
-	}
-	if (!(x & 0xc0000000u)) {
-		x <<= 2;
-		r -= 2;
-	}
-	if (!(x & 0x80000000u)) {
-		x <<= 1;
-		r -= 1;
-	}
-	return r;
-}
-
-/*
- * On ARMv5 and above those functions can be implemented around
- * the clz instruction for much better code efficiency.
- */
-
-#define fls(x) \
-	( __builtin_constant_p(x) ? constant_fls(x) : \
-	  ({ int __r; asm("clz\t%0, %1" : "=r"(__r) : "r"(x) : "cc"); 32-__r; }) )
-#define ffs(x) ({ unsigned long __t = (x); fls(__t & -__t); })
-#define __ffs(x) (ffs(x) - 1)
-#define ffz(x) __ffs( ~(x) )
-
-#endif
-
-#include <asm-generic/bitops/fls64.h>
-
-#include <asm-generic/bitops/sched.h>
-#include <asm-generic/bitops/hweight.h>
-#include <asm-generic/bitops/lock.h>
-
-/*
- * Ext2 is defined to use little-endian byte ordering.
- * These do not need to be atomic.
- */
-#define ext2_set_bit(nr,p)			\
-		__test_and_set_bit(WORD_BITOFF_TO_LE(nr), (unsigned long *)(p))
-#define ext2_set_bit_atomic(lock,nr,p)          \
-                test_and_set_bit(WORD_BITOFF_TO_LE(nr), (unsigned long *)(p))
-#define ext2_clear_bit(nr,p)			\
-		__test_and_clear_bit(WORD_BITOFF_TO_LE(nr), (unsigned long *)(p))
-#define ext2_clear_bit_atomic(lock,nr,p)        \
-                test_and_clear_bit(WORD_BITOFF_TO_LE(nr), (unsigned long *)(p))
-#define ext2_test_bit(nr,p)			\
-		test_bit(WORD_BITOFF_TO_LE(nr), (unsigned long *)(p))
-#define ext2_find_first_zero_bit(p,sz)		\
-		_find_first_zero_bit_le(p,sz)
-#define ext2_find_next_zero_bit(p,sz,off)	\
-		_find_next_zero_bit_le(p,sz,off)
-#define ext2_find_next_bit(p, sz, off) \
-		_find_next_bit_le(p, sz, off)
-
-/*
- * Minix is defined to use little-endian byte ordering.
- * These do not need to be atomic.
- */
-#define minix_set_bit(nr,p)			\
-		__set_bit(WORD_BITOFF_TO_LE(nr), (unsigned long *)(p))
-#define minix_test_bit(nr,p)			\
-		test_bit(WORD_BITOFF_TO_LE(nr), (unsigned long *)(p))
-#define minix_test_and_set_bit(nr,p)		\
-		__test_and_set_bit(WORD_BITOFF_TO_LE(nr), (unsigned long *)(p))
-#define minix_test_and_clear_bit(nr,p)		\
-		__test_and_clear_bit(WORD_BITOFF_TO_LE(nr), (unsigned long *)(p))
-#define minix_find_first_zero_bit(p,sz)		\
-		_find_first_zero_bit_le(p,sz)
-
-#endif /* __KERNEL__ */
-
-#endif /* _ARM_BITOPS_H */
diff --git a/include/asm-arm/bugs.h b/include/asm-arm/bugs.h
deleted file mode 100644
index ca54eb0f12d7..000000000000
--- a/include/asm-arm/bugs.h
+++ /dev/null
@@ -1,21 +0,0 @@
-/*
- *  linux/include/asm-arm/bugs.h
- *
- *  Copyright (C) 1995-2003 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#ifndef __ASM_BUGS_H
-#define __ASM_BUGS_H
-
-#ifdef CONFIG_MMU
-extern void check_writebuffer_bugs(void);
-
-#define check_bugs() check_writebuffer_bugs()
-#else
-#define check_bugs() do { } while (0)
-#endif
-
-#endif
diff --git a/include/asm-arm/byteorder.h b/include/asm-arm/byteorder.h
deleted file mode 100644
index e6f7fcdc73b0..000000000000
--- a/include/asm-arm/byteorder.h
+++ /dev/null
@@ -1,58 +0,0 @@
-/*
- *  linux/include/asm-arm/byteorder.h
- *
- * ARM Endian-ness.  In little endian mode, the data bus is connected such
- * that byte accesses appear as:
- *  0 = d0...d7, 1 = d8...d15, 2 = d16...d23, 3 = d24...d31
- * and word accesses (data or instruction) appear as:
- *  d0...d31
- *
- * When in big endian mode, byte accesses appear as:
- *  0 = d24...d31, 1 = d16...d23, 2 = d8...d15, 3 = d0...d7
- * and word accesses (data or instruction) appear as:
- *  d0...d31
- */
-#ifndef __ASM_ARM_BYTEORDER_H
-#define __ASM_ARM_BYTEORDER_H
-
-#include <linux/compiler.h>
-#include <asm/types.h>
-
-static inline __attribute_const__ __u32 ___arch__swab32(__u32 x)
-{
-	__u32 t;
-
-#ifndef __thumb__
-	if (!__builtin_constant_p(x)) {
-		/*
-		 * The compiler needs a bit of a hint here to always do the
-		 * right thing and not screw it up to different degrees
-		 * depending on the gcc version.
-		 */
-		asm ("eor\t%0, %1, %1, ror #16" : "=r" (t) : "r" (x));
-	} else
-#endif
-		t = x ^ ((x << 16) | (x >> 16)); /* eor r1,r0,r0,ror #16 */
-
-	x = (x << 24) | (x >> 8);		/* mov r0,r0,ror #8      */
-	t &= ~0x00FF0000;			/* bic r1,r1,#0x00FF0000 */
-	x ^= (t >> 8);				/* eor r0,r0,r1,lsr #8   */
-
-	return x;
-}
-
-#define __arch__swab32(x) ___arch__swab32(x)
-
-#if !defined(__STRICT_ANSI__) || defined(__KERNEL__)
-#  define __BYTEORDER_HAS_U64__
-#  define __SWAB_64_THRU_32__
-#endif
-
-#ifdef __ARMEB__
-#include <linux/byteorder/big_endian.h>
-#else
-#include <linux/byteorder/little_endian.h>
-#endif
-
-#endif
-
diff --git a/include/asm-arm/cache.h b/include/asm-arm/cache.h
deleted file mode 100644
index 31332c8ac04e..000000000000
--- a/include/asm-arm/cache.h
+++ /dev/null
@@ -1,10 +0,0 @@
-/*
- *  linux/include/asm-arm/cache.h
- */
-#ifndef __ASMARM_CACHE_H
-#define __ASMARM_CACHE_H
-
-#define L1_CACHE_SHIFT		5
-#define L1_CACHE_BYTES		(1 << L1_CACHE_SHIFT)
-
-#endif
diff --git a/include/asm-arm/cacheflush.h b/include/asm-arm/cacheflush.h
deleted file mode 100644
index 70b0fe724b62..000000000000
--- a/include/asm-arm/cacheflush.h
+++ /dev/null
@@ -1,528 +0,0 @@
-/*
- *  linux/include/asm-arm/cacheflush.h
- *
- *  Copyright (C) 1999-2002 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#ifndef _ASMARM_CACHEFLUSH_H
-#define _ASMARM_CACHEFLUSH_H
-
-#include <linux/sched.h>
-#include <linux/mm.h>
-
-#include <asm/glue.h>
-#include <asm/shmparam.h>
-
-#define CACHE_COLOUR(vaddr)	((vaddr & (SHMLBA - 1)) >> PAGE_SHIFT)
-
-/*
- *	Cache Model
- *	===========
- */
-#undef _CACHE
-#undef MULTI_CACHE
-
-#if defined(CONFIG_CPU_CACHE_V3)
-# ifdef _CACHE
-#  define MULTI_CACHE 1
-# else
-#  define _CACHE v3
-# endif
-#endif
-
-#if defined(CONFIG_CPU_CACHE_V4)
-# ifdef _CACHE
-#  define MULTI_CACHE 1
-# else
-#  define _CACHE v4
-# endif
-#endif
-
-#if defined(CONFIG_CPU_ARM920T) || defined(CONFIG_CPU_ARM922T) || \
-    defined(CONFIG_CPU_ARM925T) || defined(CONFIG_CPU_ARM1020)
-# define MULTI_CACHE 1
-#endif
-
-#if defined(CONFIG_CPU_ARM926T)
-# ifdef _CACHE
-#  define MULTI_CACHE 1
-# else
-#  define _CACHE arm926
-# endif
-#endif
-
-#if defined(CONFIG_CPU_ARM940T)
-# ifdef _CACHE
-#  define MULTI_CACHE 1
-# else
-#  define _CACHE arm940
-# endif
-#endif
-
-#if defined(CONFIG_CPU_ARM946E)
-# ifdef _CACHE
-#  define MULTI_CACHE 1
-# else
-#  define _CACHE arm946
-# endif
-#endif
-
-#if defined(CONFIG_CPU_CACHE_V4WB)
-# ifdef _CACHE
-#  define MULTI_CACHE 1
-# else
-#  define _CACHE v4wb
-# endif
-#endif
-
-#if defined(CONFIG_CPU_XSCALE)
-# ifdef _CACHE
-#  define MULTI_CACHE 1
-# else
-#  define _CACHE xscale
-# endif
-#endif
-
-#if defined(CONFIG_CPU_XSC3)
-# ifdef _CACHE
-#  define MULTI_CACHE 1
-# else
-#  define _CACHE xsc3
-# endif
-#endif
-
-#if defined(CONFIG_CPU_FEROCEON)
-# define MULTI_CACHE 1
-#endif
-
-#if defined(CONFIG_CPU_V6)
-//# ifdef _CACHE
-#  define MULTI_CACHE 1
-//# else
-//#  define _CACHE v6
-//# endif
-#endif
-
-#if defined(CONFIG_CPU_V7)
-//# ifdef _CACHE
-#  define MULTI_CACHE 1
-//# else
-//#  define _CACHE v7
-//# endif
-#endif
-
-#if !defined(_CACHE) && !defined(MULTI_CACHE)
-#error Unknown cache maintainence model
-#endif
-
-/*
- * This flag is used to indicate that the page pointed to by a pte
- * is dirty and requires cleaning before returning it to the user.
- */
-#define PG_dcache_dirty PG_arch_1
-
-/*
- *	MM Cache Management
- *	===================
- *
- *	The arch/arm/mm/cache-*.S and arch/arm/mm/proc-*.S files
- *	implement these methods.
- *
- *	Start addresses are inclusive and end addresses are exclusive;
- *	start addresses should be rounded down, end addresses up.
- *
- *	See Documentation/cachetlb.txt for more information.
- *	Please note that the implementation of these, and the required
- *	effects are cache-type (VIVT/VIPT/PIPT) specific.
- *
- *	flush_cache_kern_all()
- *
- *		Unconditionally clean and invalidate the entire cache.
- *
- *	flush_cache_user_mm(mm)
- *
- *		Clean and invalidate all user space cache entries
- *		before a change of page tables.
- *
- *	flush_cache_user_range(start, end, flags)
- *
- *		Clean and invalidate a range of cache entries in the
- *		specified address space before a change of page tables.
- *		- start - user start address (inclusive, page aligned)
- *		- end   - user end address   (exclusive, page aligned)
- *		- flags - vma->vm_flags field
- *
- *	coherent_kern_range(start, end)
- *
- *		Ensure coherency between the Icache and the Dcache in the
- *		region described by start, end.  If you have non-snooping
- *		Harvard caches, you need to implement this function.
- *		- start  - virtual start address
- *		- end    - virtual end address
- *
- *	DMA Cache Coherency
- *	===================
- *
- *	dma_inv_range(start, end)
- *
- *		Invalidate (discard) the specified virtual address range.
- *		May not write back any entries.  If 'start' or 'end'
- *		are not cache line aligned, those lines must be written
- *		back.
- *		- start  - virtual start address
- *		- end    - virtual end address
- *
- *	dma_clean_range(start, end)
- *
- *		Clean (write back) the specified virtual address range.
- *		- start  - virtual start address
- *		- end    - virtual end address
- *
- *	dma_flush_range(start, end)
- *
- *		Clean and invalidate the specified virtual address range.
- *		- start  - virtual start address
- *		- end    - virtual end address
- */
-
-struct cpu_cache_fns {
-	void (*flush_kern_all)(void);
-	void (*flush_user_all)(void);
-	void (*flush_user_range)(unsigned long, unsigned long, unsigned int);
-
-	void (*coherent_kern_range)(unsigned long, unsigned long);
-	void (*coherent_user_range)(unsigned long, unsigned long);
-	void (*flush_kern_dcache_page)(void *);
-
-	void (*dma_inv_range)(const void *, const void *);
-	void (*dma_clean_range)(const void *, const void *);
-	void (*dma_flush_range)(const void *, const void *);
-};
-
-struct outer_cache_fns {
-	void (*inv_range)(unsigned long, unsigned long);
-	void (*clean_range)(unsigned long, unsigned long);
-	void (*flush_range)(unsigned long, unsigned long);
-};
-
-/*
- * Select the calling method
- */
-#ifdef MULTI_CACHE
-
-extern struct cpu_cache_fns cpu_cache;
-
-#define __cpuc_flush_kern_all		cpu_cache.flush_kern_all
-#define __cpuc_flush_user_all		cpu_cache.flush_user_all
-#define __cpuc_flush_user_range		cpu_cache.flush_user_range
-#define __cpuc_coherent_kern_range	cpu_cache.coherent_kern_range
-#define __cpuc_coherent_user_range	cpu_cache.coherent_user_range
-#define __cpuc_flush_dcache_page	cpu_cache.flush_kern_dcache_page
-
-/*
- * These are private to the dma-mapping API.  Do not use directly.
- * Their sole purpose is to ensure that data held in the cache
- * is visible to DMA, or data written by DMA to system memory is
- * visible to the CPU.
- */
-#define dmac_inv_range			cpu_cache.dma_inv_range
-#define dmac_clean_range		cpu_cache.dma_clean_range
-#define dmac_flush_range		cpu_cache.dma_flush_range
-
-#else
-
-#define __cpuc_flush_kern_all		__glue(_CACHE,_flush_kern_cache_all)
-#define __cpuc_flush_user_all		__glue(_CACHE,_flush_user_cache_all)
-#define __cpuc_flush_user_range		__glue(_CACHE,_flush_user_cache_range)
-#define __cpuc_coherent_kern_range	__glue(_CACHE,_coherent_kern_range)
-#define __cpuc_coherent_user_range	__glue(_CACHE,_coherent_user_range)
-#define __cpuc_flush_dcache_page	__glue(_CACHE,_flush_kern_dcache_page)
-
-extern void __cpuc_flush_kern_all(void);
-extern void __cpuc_flush_user_all(void);
-extern void __cpuc_flush_user_range(unsigned long, unsigned long, unsigned int);
-extern void __cpuc_coherent_kern_range(unsigned long, unsigned long);
-extern void __cpuc_coherent_user_range(unsigned long, unsigned long);
-extern void __cpuc_flush_dcache_page(void *);
-
-/*
- * These are private to the dma-mapping API.  Do not use directly.
- * Their sole purpose is to ensure that data held in the cache
- * is visible to DMA, or data written by DMA to system memory is
- * visible to the CPU.
- */
-#define dmac_inv_range			__glue(_CACHE,_dma_inv_range)
-#define dmac_clean_range		__glue(_CACHE,_dma_clean_range)
-#define dmac_flush_range		__glue(_CACHE,_dma_flush_range)
-
-extern void dmac_inv_range(const void *, const void *);
-extern void dmac_clean_range(const void *, const void *);
-extern void dmac_flush_range(const void *, const void *);
-
-#endif
-
-#ifdef CONFIG_OUTER_CACHE
-
-extern struct outer_cache_fns outer_cache;
-
-static inline void outer_inv_range(unsigned long start, unsigned long end)
-{
-	if (outer_cache.inv_range)
-		outer_cache.inv_range(start, end);
-}
-static inline void outer_clean_range(unsigned long start, unsigned long end)
-{
-	if (outer_cache.clean_range)
-		outer_cache.clean_range(start, end);
-}
-static inline void outer_flush_range(unsigned long start, unsigned long end)
-{
-	if (outer_cache.flush_range)
-		outer_cache.flush_range(start, end);
-}
-
-#else
-
-static inline void outer_inv_range(unsigned long start, unsigned long end)
-{ }
-static inline void outer_clean_range(unsigned long start, unsigned long end)
-{ }
-static inline void outer_flush_range(unsigned long start, unsigned long end)
-{ }
-
-#endif
-
-/*
- * flush_cache_vmap() is used when creating mappings (eg, via vmap,
- * vmalloc, ioremap etc) in kernel space for pages.  Since the
- * direct-mappings of these pages may contain cached data, we need
- * to do a full cache flush to ensure that writebacks don't corrupt
- * data placed into these pages via the new mappings.
- */
-#define flush_cache_vmap(start, end)		flush_cache_all()
-#define flush_cache_vunmap(start, end)		flush_cache_all()
-
-/*
- * Copy user data from/to a page which is mapped into a different
- * processes address space.  Really, we want to allow our "user
- * space" model to handle this.
- */
-#define copy_to_user_page(vma, page, vaddr, dst, src, len) \
-	do {							\
-		memcpy(dst, src, len);				\
-		flush_ptrace_access(vma, page, vaddr, dst, len, 1);\
-	} while (0)
-
-#define copy_from_user_page(vma, page, vaddr, dst, src, len) \
-	do {							\
-		memcpy(dst, src, len);				\
-	} while (0)
-
-/*
- * Convert calls to our calling convention.
- */
-#define flush_cache_all()		__cpuc_flush_kern_all()
-#ifndef CONFIG_CPU_CACHE_VIPT
-static inline void flush_cache_mm(struct mm_struct *mm)
-{
-	if (cpu_isset(smp_processor_id(), mm->cpu_vm_mask))
-		__cpuc_flush_user_all();
-}
-
-static inline void
-flush_cache_range(struct vm_area_struct *vma, unsigned long start, unsigned long end)
-{
-	if (cpu_isset(smp_processor_id(), vma->vm_mm->cpu_vm_mask))
-		__cpuc_flush_user_range(start & PAGE_MASK, PAGE_ALIGN(end),
-					vma->vm_flags);
-}
-
-static inline void
-flush_cache_page(struct vm_area_struct *vma, unsigned long user_addr, unsigned long pfn)
-{
-	if (cpu_isset(smp_processor_id(), vma->vm_mm->cpu_vm_mask)) {
-		unsigned long addr = user_addr & PAGE_MASK;
-		__cpuc_flush_user_range(addr, addr + PAGE_SIZE, vma->vm_flags);
-	}
-}
-
-static inline void
-flush_ptrace_access(struct vm_area_struct *vma, struct page *page,
-			 unsigned long uaddr, void *kaddr,
-			 unsigned long len, int write)
-{
-	if (cpu_isset(smp_processor_id(), vma->vm_mm->cpu_vm_mask)) {
-		unsigned long addr = (unsigned long)kaddr;
-		__cpuc_coherent_kern_range(addr, addr + len);
-	}
-}
-#else
-extern void flush_cache_mm(struct mm_struct *mm);
-extern void flush_cache_range(struct vm_area_struct *vma, unsigned long start, unsigned long end);
-extern void flush_cache_page(struct vm_area_struct *vma, unsigned long user_addr, unsigned long pfn);
-extern void flush_ptrace_access(struct vm_area_struct *vma, struct page *page,
-				unsigned long uaddr, void *kaddr,
-				unsigned long len, int write);
-#endif
-
-#define flush_cache_dup_mm(mm) flush_cache_mm(mm)
-
-/*
- * flush_cache_user_range is used when we want to ensure that the
- * Harvard caches are synchronised for the user space address range.
- * This is used for the ARM private sys_cacheflush system call.
- */
-#define flush_cache_user_range(vma,start,end) \
-	__cpuc_coherent_user_range((start) & PAGE_MASK, PAGE_ALIGN(end))
-
-/*
- * Perform necessary cache operations to ensure that data previously
- * stored within this range of addresses can be executed by the CPU.
- */
-#define flush_icache_range(s,e)		__cpuc_coherent_kern_range(s,e)
-
-/*
- * Perform necessary cache operations to ensure that the TLB will
- * see data written in the specified area.
- */
-#define clean_dcache_area(start,size)	cpu_dcache_clean_area(start, size)
-
-/*
- * flush_dcache_page is used when the kernel has written to the page
- * cache page at virtual address page->virtual.
- *
- * If this page isn't mapped (ie, page_mapping == NULL), or it might
- * have userspace mappings, then we _must_ always clean + invalidate
- * the dcache entries associated with the kernel mapping.
- *
- * Otherwise we can defer the operation, and clean the cache when we are
- * about to change to user space.  This is the same method as used on SPARC64.
- * See update_mmu_cache for the user space part.
- */
-extern void flush_dcache_page(struct page *);
-
-extern void __flush_dcache_page(struct address_space *mapping, struct page *page);
-
-static inline void __flush_icache_all(void)
-{
-	asm("mcr	p15, 0, %0, c7, c5, 0	@ invalidate I-cache\n"
-	    :
-	    : "r" (0));
-}
-
-#define ARCH_HAS_FLUSH_ANON_PAGE
-static inline void flush_anon_page(struct vm_area_struct *vma,
-			 struct page *page, unsigned long vmaddr)
-{
-	extern void __flush_anon_page(struct vm_area_struct *vma,
-				struct page *, unsigned long);
-	if (PageAnon(page))
-		__flush_anon_page(vma, page, vmaddr);
-}
-
-#define flush_dcache_mmap_lock(mapping) \
-	write_lock_irq(&(mapping)->tree_lock)
-#define flush_dcache_mmap_unlock(mapping) \
-	write_unlock_irq(&(mapping)->tree_lock)
-
-#define flush_icache_user_range(vma,page,addr,len) \
-	flush_dcache_page(page)
-
-/*
- * We don't appear to need to do anything here.  In fact, if we did, we'd
- * duplicate cache flushing elsewhere performed by flush_dcache_page().
- */
-#define flush_icache_page(vma,page)	do { } while (0)
-
-static inline void flush_ioremap_region(unsigned long phys, void __iomem *virt,
-	unsigned offset, size_t size)
-{
-	const void *start = (void __force *)virt + offset;
-	dmac_inv_range(start, start + size);
-}
-
-#define __cacheid_present(val)			(val != read_cpuid(CPUID_ID))
-#define __cacheid_type_v7(val)			((val & (7 << 29)) == (4 << 29))
-
-#define __cacheid_vivt_prev7(val)		((val & (15 << 25)) != (14 << 25))
-#define __cacheid_vipt_prev7(val)		((val & (15 << 25)) == (14 << 25))
-#define __cacheid_vipt_nonaliasing_prev7(val)	((val & (15 << 25 | 1 << 23)) == (14 << 25))
-#define __cacheid_vipt_aliasing_prev7(val)	((val & (15 << 25 | 1 << 23)) == (14 << 25 | 1 << 23))
-
-#define __cacheid_vivt(val)			(__cacheid_type_v7(val) ? 0 : __cacheid_vivt_prev7(val))
-#define __cacheid_vipt(val)			(__cacheid_type_v7(val) ? 1 : __cacheid_vipt_prev7(val))
-#define __cacheid_vipt_nonaliasing(val)		(__cacheid_type_v7(val) ? 1 : __cacheid_vipt_nonaliasing_prev7(val))
-#define __cacheid_vipt_aliasing(val)		(__cacheid_type_v7(val) ? 0 : __cacheid_vipt_aliasing_prev7(val))
-#define __cacheid_vivt_asid_tagged_instr(val)	(__cacheid_type_v7(val) ? ((val & (3 << 14)) == (1 << 14)) : 0)
-
-#if defined(CONFIG_CPU_CACHE_VIVT) && !defined(CONFIG_CPU_CACHE_VIPT)
-
-#define cache_is_vivt()			1
-#define cache_is_vipt()			0
-#define cache_is_vipt_nonaliasing()	0
-#define cache_is_vipt_aliasing()	0
-#define icache_is_vivt_asid_tagged()	0
-
-#elif defined(CONFIG_CPU_CACHE_VIPT)
-
-#define cache_is_vivt()			0
-#define cache_is_vipt()			1
-#define cache_is_vipt_nonaliasing()					\
-	({								\
-		unsigned int __val = read_cpuid(CPUID_CACHETYPE);	\
-		__cacheid_vipt_nonaliasing(__val);			\
-	})
-
-#define cache_is_vipt_aliasing()					\
-	({								\
-		unsigned int __val = read_cpuid(CPUID_CACHETYPE);	\
-		__cacheid_vipt_aliasing(__val);				\
-	})
-
-#define icache_is_vivt_asid_tagged()					\
-	({								\
-		unsigned int __val = read_cpuid(CPUID_CACHETYPE);	\
-		__cacheid_vivt_asid_tagged_instr(__val);		\
-	})
-
-#else
-
-#define cache_is_vivt()							\
-	({								\
-		unsigned int __val = read_cpuid(CPUID_CACHETYPE);	\
-		(!__cacheid_present(__val)) || __cacheid_vivt(__val);	\
-	})
-		
-#define cache_is_vipt()							\
-	({								\
-		unsigned int __val = read_cpuid(CPUID_CACHETYPE);	\
-		__cacheid_present(__val) && __cacheid_vipt(__val);	\
-	})
-
-#define cache_is_vipt_nonaliasing()					\
-	({								\
-		unsigned int __val = read_cpuid(CPUID_CACHETYPE);	\
-		__cacheid_present(__val) &&				\
-		 __cacheid_vipt_nonaliasing(__val);			\
-	})
-
-#define cache_is_vipt_aliasing()					\
-	({								\
-		unsigned int __val = read_cpuid(CPUID_CACHETYPE);	\
-		__cacheid_present(__val) &&				\
-		 __cacheid_vipt_aliasing(__val);			\
-	})
-
-#define icache_is_vivt_asid_tagged()					\
-	({								\
-		unsigned int __val = read_cpuid(CPUID_CACHETYPE);	\
-		__cacheid_present(__val) &&				\
-		 __cacheid_vivt_asid_tagged_instr(__val);		\
-	})
-
-#endif
-
-#endif
diff --git a/include/asm-arm/checksum.h b/include/asm-arm/checksum.h
deleted file mode 100644
index eaa0efd8d0d4..000000000000
--- a/include/asm-arm/checksum.h
+++ /dev/null
@@ -1,139 +0,0 @@
-/*
- *  linux/include/asm-arm/checksum.h
- *
- * IP checksum routines
- *
- * Copyright (C) Original authors of ../asm-i386/checksum.h
- * Copyright (C) 1996-1999 Russell King
- */
-#ifndef __ASM_ARM_CHECKSUM_H
-#define __ASM_ARM_CHECKSUM_H
-
-#include <linux/in6.h>
-
-/*
- * computes the checksum of a memory block at buff, length len,
- * and adds in "sum" (32-bit)
- *
- * returns a 32-bit number suitable for feeding into itself
- * or csum_tcpudp_magic
- *
- * this function must be called with even lengths, except
- * for the last fragment, which may be odd
- *
- * it's best to have buff aligned on a 32-bit boundary
- */
-__wsum csum_partial(const void *buff, int len, __wsum sum);
-
-/*
- * the same as csum_partial, but copies from src while it
- * checksums, and handles user-space pointer exceptions correctly, when needed.
- *
- * here even more important to align src and dst on a 32-bit (or even
- * better 64-bit) boundary
- */
-
-__wsum
-csum_partial_copy_nocheck(const void *src, void *dst, int len, __wsum sum);
-
-__wsum
-csum_partial_copy_from_user(const void __user *src, void *dst, int len, __wsum sum, int *err_ptr);
-
-/*
- * 	Fold a partial checksum without adding pseudo headers
- */
-static inline __sum16 csum_fold(__wsum sum)
-{
-	__asm__(
-	"add	%0, %1, %1, ror #16	@ csum_fold"
-	: "=r" (sum)
-	: "r" (sum)
-	: "cc");
-	return (__force __sum16)(~(__force u32)sum >> 16);
-}
-
-/*
- *	This is a version of ip_compute_csum() optimized for IP headers,
- *	which always checksum on 4 octet boundaries.
- */
-static inline __sum16
-ip_fast_csum(const void *iph, unsigned int ihl)
-{
-	unsigned int tmp1;
-	__wsum sum;
-
-	__asm__ __volatile__(
-	"ldr	%0, [%1], #4		@ ip_fast_csum		\n\
-	ldr	%3, [%1], #4					\n\
-	sub	%2, %2, #5					\n\
-	adds	%0, %0, %3					\n\
-	ldr	%3, [%1], #4					\n\
-	adcs	%0, %0, %3					\n\
-	ldr	%3, [%1], #4					\n\
-1:	adcs	%0, %0, %3					\n\
-	ldr	%3, [%1], #4					\n\
-	tst	%2, #15			@ do this carefully	\n\
-	subne	%2, %2, #1		@ without destroying	\n\
-	bne	1b			@ the carry flag	\n\
-	adcs	%0, %0, %3					\n\
-	adc	%0, %0, #0"
-	: "=r" (sum), "=r" (iph), "=r" (ihl), "=r" (tmp1)
-	: "1" (iph), "2" (ihl)
-	: "cc", "memory");
-	return csum_fold(sum);
-}
-
-static inline __wsum
-csum_tcpudp_nofold(__be32 saddr, __be32 daddr, unsigned short len,
-		   unsigned short proto, __wsum sum)
-{
-	__asm__(
-	"adds	%0, %1, %2		@ csum_tcpudp_nofold	\n\
-	adcs	%0, %0, %3					\n"
-#ifdef __ARMEB__
-	"adcs	%0, %0, %4					\n"
-#else
-	"adcs	%0, %0, %4, lsl #8				\n"
-#endif
-	"adcs	%0, %0, %5					\n\
-	adc	%0, %0, #0"
-	: "=&r"(sum)
-	: "r" (sum), "r" (daddr), "r" (saddr), "r" (len), "Ir" (htons(proto))
-	: "cc");
-	return sum;
-}	
-/*
- * computes the checksum of the TCP/UDP pseudo-header
- * returns a 16-bit checksum, already complemented
- */
-static inline __sum16
-csum_tcpudp_magic(__be32 saddr, __be32 daddr, unsigned short len,
-		  unsigned short proto, __wsum sum)
-{
-	return csum_fold(csum_tcpudp_nofold(saddr, daddr, len, proto, sum));
-}
-
-
-/*
- * this routine is used for miscellaneous IP-like checksums, mainly
- * in icmp.c
- */
-static inline __sum16
-ip_compute_csum(const void *buff, int len)
-{
-	return csum_fold(csum_partial(buff, len, 0));
-}
-
-#define _HAVE_ARCH_IPV6_CSUM
-extern __wsum
-__csum_ipv6_magic(const struct in6_addr *saddr, const struct in6_addr *daddr, __be32 len,
-		__be32 proto, __wsum sum);
-
-static inline __sum16
-csum_ipv6_magic(const struct in6_addr *saddr, const struct in6_addr *daddr, __u32 len,
-		unsigned short proto, __wsum sum)
-{
-	return csum_fold(__csum_ipv6_magic(saddr, daddr, htonl(len),
-					   htonl(proto), sum));
-}
-#endif
diff --git a/include/asm-arm/cpu.h b/include/asm-arm/cpu.h
deleted file mode 100644
index 715426b9b08e..000000000000
--- a/include/asm-arm/cpu.h
+++ /dev/null
@@ -1,25 +0,0 @@
-/*
- *  linux/include/asm-arm/cpu.h
- *
- *  Copyright (C) 2004-2005 ARM Ltd.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#ifndef __ASM_ARM_CPU_H
-#define __ASM_ARM_CPU_H
-
-#include <linux/percpu.h>
-
-struct cpuinfo_arm {
-	struct cpu	cpu;
-#ifdef CONFIG_SMP
-	struct task_struct *idle;
-	unsigned int	loops_per_jiffy;
-#endif
-};
-
-DECLARE_PER_CPU(struct cpuinfo_arm, cpu_data);
-
-#endif
diff --git a/include/asm-arm/dma-mapping.h b/include/asm-arm/dma-mapping.h
deleted file mode 100644
index e99406a7bece..000000000000
--- a/include/asm-arm/dma-mapping.h
+++ /dev/null
@@ -1,456 +0,0 @@
-#ifndef ASMARM_DMA_MAPPING_H
-#define ASMARM_DMA_MAPPING_H
-
-#ifdef __KERNEL__
-
-#include <linux/mm.h> /* need struct page */
-
-#include <linux/scatterlist.h>
-
-/*
- * DMA-consistent mapping functions.  These allocate/free a region of
- * uncached, unwrite-buffered mapped memory space for use with DMA
- * devices.  This is the "generic" version.  The PCI specific version
- * is in pci.h
- *
- * Note: Drivers should NOT use this function directly, as it will break
- * platforms with CONFIG_DMABOUNCE.
- * Use the driver DMA support - see dma-mapping.h (dma_sync_*)
- */
-extern void dma_cache_maint(const void *kaddr, size_t size, int rw);
-
-/*
- * Return whether the given device DMA address mask can be supported
- * properly.  For example, if your device can only drive the low 24-bits
- * during bus mastering, then you would pass 0x00ffffff as the mask
- * to this function.
- *
- * FIXME: This should really be a platform specific issue - we should
- * return false if GFP_DMA allocations may not satisfy the supplied 'mask'.
- */
-static inline int dma_supported(struct device *dev, u64 mask)
-{
-	return dev->dma_mask && *dev->dma_mask != 0;
-}
-
-static inline int dma_set_mask(struct device *dev, u64 dma_mask)
-{
-	if (!dev->dma_mask || !dma_supported(dev, dma_mask))
-		return -EIO;
-
-	*dev->dma_mask = dma_mask;
-
-	return 0;
-}
-
-static inline int dma_get_cache_alignment(void)
-{
-	return 32;
-}
-
-static inline int dma_is_consistent(struct device *dev, dma_addr_t handle)
-{
-	return !!arch_is_coherent();
-}
-
-/*
- * DMA errors are defined by all-bits-set in the DMA address.
- */
-static inline int dma_mapping_error(dma_addr_t dma_addr)
-{
-	return dma_addr == ~0;
-}
-
-/*
- * Dummy noncoherent implementation.  We don't provide a dma_cache_sync
- * function so drivers using this API are highlighted with build warnings.
- */
-static inline void *
-dma_alloc_noncoherent(struct device *dev, size_t size, dma_addr_t *handle, gfp_t gfp)
-{
-	return NULL;
-}
-
-static inline void
-dma_free_noncoherent(struct device *dev, size_t size, void *cpu_addr,
-		     dma_addr_t handle)
-{
-}
-
-/**
- * dma_alloc_coherent - allocate consistent memory for DMA
- * @dev: valid struct device pointer, or NULL for ISA and EISA-like devices
- * @size: required memory size
- * @handle: bus-specific DMA address
- *
- * Allocate some uncached, unbuffered memory for a device for
- * performing DMA.  This function allocates pages, and will
- * return the CPU-viewed address, and sets @handle to be the
- * device-viewed address.
- */
-extern void *
-dma_alloc_coherent(struct device *dev, size_t size, dma_addr_t *handle, gfp_t gfp);
-
-/**
- * dma_free_coherent - free memory allocated by dma_alloc_coherent
- * @dev: valid struct device pointer, or NULL for ISA and EISA-like devices
- * @size: size of memory originally requested in dma_alloc_coherent
- * @cpu_addr: CPU-view address returned from dma_alloc_coherent
- * @handle: device-view address returned from dma_alloc_coherent
- *
- * Free (and unmap) a DMA buffer previously allocated by
- * dma_alloc_coherent().
- *
- * References to memory and mappings associated with cpu_addr/handle
- * during and after this call executing are illegal.
- */
-extern void
-dma_free_coherent(struct device *dev, size_t size, void *cpu_addr,
-		  dma_addr_t handle);
-
-/**
- * dma_mmap_coherent - map a coherent DMA allocation into user space
- * @dev: valid struct device pointer, or NULL for ISA and EISA-like devices
- * @vma: vm_area_struct describing requested user mapping
- * @cpu_addr: kernel CPU-view address returned from dma_alloc_coherent
- * @handle: device-view address returned from dma_alloc_coherent
- * @size: size of memory originally requested in dma_alloc_coherent
- *
- * Map a coherent DMA buffer previously allocated by dma_alloc_coherent
- * into user space.  The coherent DMA buffer must not be freed by the
- * driver until the user space mapping has been released.
- */
-int dma_mmap_coherent(struct device *dev, struct vm_area_struct *vma,
-		      void *cpu_addr, dma_addr_t handle, size_t size);
-
-
-/**
- * dma_alloc_writecombine - allocate writecombining memory for DMA
- * @dev: valid struct device pointer, or NULL for ISA and EISA-like devices
- * @size: required memory size
- * @handle: bus-specific DMA address
- *
- * Allocate some uncached, buffered memory for a device for
- * performing DMA.  This function allocates pages, and will
- * return the CPU-viewed address, and sets @handle to be the
- * device-viewed address.
- */
-extern void *
-dma_alloc_writecombine(struct device *dev, size_t size, dma_addr_t *handle, gfp_t gfp);
-
-#define dma_free_writecombine(dev,size,cpu_addr,handle) \
-	dma_free_coherent(dev,size,cpu_addr,handle)
-
-int dma_mmap_writecombine(struct device *dev, struct vm_area_struct *vma,
-			  void *cpu_addr, dma_addr_t handle, size_t size);
-
-
-/**
- * dma_map_single - map a single buffer for streaming DMA
- * @dev: valid struct device pointer, or NULL for ISA and EISA-like devices
- * @cpu_addr: CPU direct mapped address of buffer
- * @size: size of buffer to map
- * @dir: DMA transfer direction
- *
- * Ensure that any data held in the cache is appropriately discarded
- * or written back.
- *
- * The device owns this memory once this call has completed.  The CPU
- * can regain ownership by calling dma_unmap_single() or
- * dma_sync_single_for_cpu().
- */
-#ifndef CONFIG_DMABOUNCE
-static inline dma_addr_t
-dma_map_single(struct device *dev, void *cpu_addr, size_t size,
-	       enum dma_data_direction dir)
-{
-	if (!arch_is_coherent())
-		dma_cache_maint(cpu_addr, size, dir);
-
-	return virt_to_dma(dev, (unsigned long)cpu_addr);
-}
-#else
-extern dma_addr_t dma_map_single(struct device *,void *, size_t, enum dma_data_direction);
-#endif
-
-/**
- * dma_map_page - map a portion of a page for streaming DMA
- * @dev: valid struct device pointer, or NULL for ISA and EISA-like devices
- * @page: page that buffer resides in
- * @offset: offset into page for start of buffer
- * @size: size of buffer to map
- * @dir: DMA transfer direction
- *
- * Ensure that any data held in the cache is appropriately discarded
- * or written back.
- *
- * The device owns this memory once this call has completed.  The CPU
- * can regain ownership by calling dma_unmap_page() or
- * dma_sync_single_for_cpu().
- */
-static inline dma_addr_t
-dma_map_page(struct device *dev, struct page *page,
-	     unsigned long offset, size_t size,
-	     enum dma_data_direction dir)
-{
-	return dma_map_single(dev, page_address(page) + offset, size, (int)dir);
-}
-
-/**
- * dma_unmap_single - unmap a single buffer previously mapped
- * @dev: valid struct device pointer, or NULL for ISA and EISA-like devices
- * @handle: DMA address of buffer
- * @size: size of buffer to map
- * @dir: DMA transfer direction
- *
- * Unmap a single streaming mode DMA translation.  The handle and size
- * must match what was provided in the previous dma_map_single() call.
- * All other usages are undefined.
- *
- * After this call, reads by the CPU to the buffer are guaranteed to see
- * whatever the device wrote there.
- */
-#ifndef CONFIG_DMABOUNCE
-static inline void
-dma_unmap_single(struct device *dev, dma_addr_t handle, size_t size,
-		 enum dma_data_direction dir)
-{
-	/* nothing to do */
-}
-#else
-extern void dma_unmap_single(struct device *, dma_addr_t, size_t, enum dma_data_direction);
-#endif
-
-/**
- * dma_unmap_page - unmap a buffer previously mapped through dma_map_page()
- * @dev: valid struct device pointer, or NULL for ISA and EISA-like devices
- * @handle: DMA address of buffer
- * @size: size of buffer to map
- * @dir: DMA transfer direction
- *
- * Unmap a single streaming mode DMA translation.  The handle and size
- * must match what was provided in the previous dma_map_single() call.
- * All other usages are undefined.
- *
- * After this call, reads by the CPU to the buffer are guaranteed to see
- * whatever the device wrote there.
- */
-static inline void
-dma_unmap_page(struct device *dev, dma_addr_t handle, size_t size,
-	       enum dma_data_direction dir)
-{
-	dma_unmap_single(dev, handle, size, (int)dir);
-}
-
-/**
- * dma_map_sg - map a set of SG buffers for streaming mode DMA
- * @dev: valid struct device pointer, or NULL for ISA and EISA-like devices
- * @sg: list of buffers
- * @nents: number of buffers to map
- * @dir: DMA transfer direction
- *
- * Map a set of buffers described by scatterlist in streaming
- * mode for DMA.  This is the scatter-gather version of the
- * above dma_map_single interface.  Here the scatter gather list
- * elements are each tagged with the appropriate dma address
- * and length.  They are obtained via sg_dma_{address,length}(SG).
- *
- * NOTE: An implementation may be able to use a smaller number of
- *       DMA address/length pairs than there are SG table elements.
- *       (for example via virtual mapping capabilities)
- *       The routine returns the number of addr/length pairs actually
- *       used, at most nents.
- *
- * Device ownership issues as mentioned above for dma_map_single are
- * the same here.
- */
-#ifndef CONFIG_DMABOUNCE
-static inline int
-dma_map_sg(struct device *dev, struct scatterlist *sg, int nents,
-	   enum dma_data_direction dir)
-{
-	int i;
-
-	for (i = 0; i < nents; i++, sg++) {
-		char *virt;
-
-		sg->dma_address = page_to_dma(dev, sg_page(sg)) + sg->offset;
-		virt = sg_virt(sg);
-
-		if (!arch_is_coherent())
-			dma_cache_maint(virt, sg->length, dir);
-	}
-
-	return nents;
-}
-#else
-extern int dma_map_sg(struct device *, struct scatterlist *, int, enum dma_data_direction);
-#endif
-
-/**
- * dma_unmap_sg - unmap a set of SG buffers mapped by dma_map_sg
- * @dev: valid struct device pointer, or NULL for ISA and EISA-like devices
- * @sg: list of buffers
- * @nents: number of buffers to map
- * @dir: DMA transfer direction
- *
- * Unmap a set of streaming mode DMA translations.
- * Again, CPU read rules concerning calls here are the same as for
- * dma_unmap_single() above.
- */
-#ifndef CONFIG_DMABOUNCE
-static inline void
-dma_unmap_sg(struct device *dev, struct scatterlist *sg, int nents,
-	     enum dma_data_direction dir)
-{
-
-	/* nothing to do */
-}
-#else
-extern void dma_unmap_sg(struct device *, struct scatterlist *, int, enum dma_data_direction);
-#endif
-
-
-/**
- * dma_sync_single_for_cpu
- * @dev: valid struct device pointer, or NULL for ISA and EISA-like devices
- * @handle: DMA address of buffer
- * @size: size of buffer to map
- * @dir: DMA transfer direction
- *
- * Make physical memory consistent for a single streaming mode DMA
- * translation after a transfer.
- *
- * If you perform a dma_map_single() but wish to interrogate the
- * buffer using the cpu, yet do not wish to teardown the PCI dma
- * mapping, you must call this function before doing so.  At the
- * next point you give the PCI dma address back to the card, you
- * must first the perform a dma_sync_for_device, and then the
- * device again owns the buffer.
- */
-#ifndef CONFIG_DMABOUNCE
-static inline void
-dma_sync_single_for_cpu(struct device *dev, dma_addr_t handle, size_t size,
-			enum dma_data_direction dir)
-{
-	if (!arch_is_coherent())
-		dma_cache_maint((void *)dma_to_virt(dev, handle), size, dir);
-}
-
-static inline void
-dma_sync_single_for_device(struct device *dev, dma_addr_t handle, size_t size,
-			   enum dma_data_direction dir)
-{
-	if (!arch_is_coherent())
-		dma_cache_maint((void *)dma_to_virt(dev, handle), size, dir);
-}
-#else
-extern void dma_sync_single_for_cpu(struct device*, dma_addr_t, size_t, enum dma_data_direction);
-extern void dma_sync_single_for_device(struct device*, dma_addr_t, size_t, enum dma_data_direction);
-#endif
-
-
-/**
- * dma_sync_sg_for_cpu
- * @dev: valid struct device pointer, or NULL for ISA and EISA-like devices
- * @sg: list of buffers
- * @nents: number of buffers to map
- * @dir: DMA transfer direction
- *
- * Make physical memory consistent for a set of streaming
- * mode DMA translations after a transfer.
- *
- * The same as dma_sync_single_for_* but for a scatter-gather list,
- * same rules and usage.
- */
-#ifndef CONFIG_DMABOUNCE
-static inline void
-dma_sync_sg_for_cpu(struct device *dev, struct scatterlist *sg, int nents,
-		    enum dma_data_direction dir)
-{
-	int i;
-
-	for (i = 0; i < nents; i++, sg++) {
-		char *virt = sg_virt(sg);
-		if (!arch_is_coherent())
-			dma_cache_maint(virt, sg->length, dir);
-	}
-}
-
-static inline void
-dma_sync_sg_for_device(struct device *dev, struct scatterlist *sg, int nents,
-		       enum dma_data_direction dir)
-{
-	int i;
-
-	for (i = 0; i < nents; i++, sg++) {
-		char *virt = sg_virt(sg);
-		if (!arch_is_coherent())
-			dma_cache_maint(virt, sg->length, dir);
-	}
-}
-#else
-extern void dma_sync_sg_for_cpu(struct device*, struct scatterlist*, int, enum dma_data_direction);
-extern void dma_sync_sg_for_device(struct device*, struct scatterlist*, int, enum dma_data_direction);
-#endif
-
-#ifdef CONFIG_DMABOUNCE
-/*
- * For SA-1111, IXP425, and ADI systems  the dma-mapping functions are "magic"
- * and utilize bounce buffers as needed to work around limited DMA windows.
- *
- * On the SA-1111, a bug limits DMA to only certain regions of RAM.
- * On the IXP425, the PCI inbound window is 64MB (256MB total RAM)
- * On some ADI engineering systems, PCI inbound window is 32MB (12MB total RAM)
- *
- * The following are helper functions used by the dmabounce subystem
- *
- */
-
-/**
- * dmabounce_register_dev
- *
- * @dev: valid struct device pointer
- * @small_buf_size: size of buffers to use with small buffer pool
- * @large_buf_size: size of buffers to use with large buffer pool (can be 0)
- *
- * This function should be called by low-level platform code to register
- * a device as requireing DMA buffer bouncing. The function will allocate
- * appropriate DMA pools for the device.
- *
- */
-extern int dmabounce_register_dev(struct device *, unsigned long, unsigned long);
-
-/**
- * dmabounce_unregister_dev
- *
- * @dev: valid struct device pointer
- *
- * This function should be called by low-level platform code when device
- * that was previously registered with dmabounce_register_dev is removed
- * from the system.
- *
- */
-extern void dmabounce_unregister_dev(struct device *);
-
-/**
- * dma_needs_bounce
- *
- * @dev: valid struct device pointer
- * @dma_handle: dma_handle of unbounced buffer
- * @size: size of region being mapped
- *
- * Platforms that utilize the dmabounce mechanism must implement
- * this function.
- *
- * The dmabounce routines call this function whenever a dma-mapping
- * is requested to determine whether a given buffer needs to be bounced
- * or not. The function must return 0 if the buffer is OK for
- * DMA access and 1 if the buffer needs to be bounced.
- *
- */
-extern int dma_needs_bounce(struct device*, dma_addr_t, size_t);
-#endif /* CONFIG_DMABOUNCE */
-
-#endif /* __KERNEL__ */
-#endif
diff --git a/include/asm-arm/dma.h b/include/asm-arm/dma.h
deleted file mode 100644
index 9f2c5305c260..000000000000
--- a/include/asm-arm/dma.h
+++ /dev/null
@@ -1,143 +0,0 @@
-#ifndef __ASM_ARM_DMA_H
-#define __ASM_ARM_DMA_H
-
-typedef unsigned int dmach_t;
-
-#include <linux/spinlock.h>
-#include <asm/system.h>
-#include <asm/scatterlist.h>
-#include <asm/arch/dma.h>
-
-/*
- * This is the maximum virtual address which can be DMA'd from.
- */
-#ifndef MAX_DMA_ADDRESS
-#define MAX_DMA_ADDRESS	0xffffffff
-#endif
-
-/*
- * DMA modes
- */
-typedef unsigned int dmamode_t;
-
-#define DMA_MODE_MASK	3
-
-#define DMA_MODE_READ	 0
-#define DMA_MODE_WRITE	 1
-#define DMA_MODE_CASCADE 2
-#define DMA_AUTOINIT	 4
-
-extern spinlock_t  dma_spin_lock;
-
-static inline unsigned long claim_dma_lock(void)
-{
-	unsigned long flags;
-	spin_lock_irqsave(&dma_spin_lock, flags);
-	return flags;
-}
-
-static inline void release_dma_lock(unsigned long flags)
-{
-	spin_unlock_irqrestore(&dma_spin_lock, flags);
-}
-
-/* Clear the 'DMA Pointer Flip Flop'.
- * Write 0 for LSB/MSB, 1 for MSB/LSB access.
- */
-#define clear_dma_ff(channel)
-
-/* Set only the page register bits of the transfer address.
- *
- * NOTE: This is an architecture specific function, and should
- *       be hidden from the drivers
- */
-extern void set_dma_page(dmach_t channel, char pagenr);
-
-/* Request a DMA channel
- *
- * Some architectures may need to do allocate an interrupt
- */
-extern int  request_dma(dmach_t channel, const char * device_id);
-
-/* Free a DMA channel
- *
- * Some architectures may need to do free an interrupt
- */
-extern void free_dma(dmach_t channel);
-
-/* Enable DMA for this channel
- *
- * On some architectures, this may have other side effects like
- * enabling an interrupt and setting the DMA registers.
- */
-extern void enable_dma(dmach_t channel);
-
-/* Disable DMA for this channel
- *
- * On some architectures, this may have other side effects like
- * disabling an interrupt or whatever.
- */
-extern void disable_dma(dmach_t channel);
-
-/* Test whether the specified channel has an active DMA transfer
- */
-extern int dma_channel_active(dmach_t channel);
-
-/* Set the DMA scatter gather list for this channel
- *
- * This should not be called if a DMA channel is enabled,
- * especially since some DMA architectures don't update the
- * DMA address immediately, but defer it to the enable_dma().
- */
-extern void set_dma_sg(dmach_t channel, struct scatterlist *sg, int nr_sg);
-
-/* Set the DMA address for this channel
- *
- * This should not be called if a DMA channel is enabled,
- * especially since some DMA architectures don't update the
- * DMA address immediately, but defer it to the enable_dma().
- */
-extern void __set_dma_addr(dmach_t channel, void *addr);
-#define set_dma_addr(channel, addr)				\
-	__set_dma_addr(channel, bus_to_virt(addr))
-
-/* Set the DMA byte count for this channel
- *
- * This should not be called if a DMA channel is enabled,
- * especially since some DMA architectures don't update the
- * DMA count immediately, but defer it to the enable_dma().
- */
-extern void set_dma_count(dmach_t channel, unsigned long count);
-
-/* Set the transfer direction for this channel
- *
- * This should not be called if a DMA channel is enabled,
- * especially since some DMA architectures don't update the
- * DMA transfer direction immediately, but defer it to the
- * enable_dma().
- */
-extern void set_dma_mode(dmach_t channel, dmamode_t mode);
-
-/* Set the transfer speed for this channel
- */
-extern void set_dma_speed(dmach_t channel, int cycle_ns);
-
-/* Get DMA residue count. After a DMA transfer, this
- * should return zero. Reading this while a DMA transfer is
- * still in progress will return unpredictable results.
- * If called before the channel has been used, it may return 1.
- * Otherwise, it returns the number of _bytes_ left to transfer.
- */
-extern int  get_dma_residue(dmach_t channel);
-
-#ifndef NO_DMA
-#define NO_DMA	255
-#endif
-
-#ifdef CONFIG_PCI
-extern int isa_dma_bridge_buggy;
-#else
-#define isa_dma_bridge_buggy    (0)
-#endif
-
-#endif /* _ARM_DMA_H */
diff --git a/include/asm-arm/flat.h b/include/asm-arm/flat.h
deleted file mode 100644
index 9918aa46d9e5..000000000000
--- a/include/asm-arm/flat.h
+++ /dev/null
@@ -1,19 +0,0 @@
-/*
- * include/asm-arm/flat.h -- uClinux flat-format executables
- */
-
-#ifndef __ARM_FLAT_H__
-#define __ARM_FLAT_H__
-
-/* An odd number of words will be pushed after this alignment, so
-   deliberately misalign the value.  */
-#define	flat_stack_align(sp)	sp = (void *)(((unsigned long)(sp) - 4) | 4)
-#define	flat_argvp_envp_on_stack()		1
-#define	flat_old_ram_flag(flags)		(flags)
-#define	flat_reloc_valid(reloc, size)		((reloc) <= (size))
-#define	flat_get_addr_from_rp(rp, relval, flags, persistent) get_unaligned(rp)
-#define	flat_put_addr_at_rp(rp, val, relval)	put_unaligned(val,rp)
-#define	flat_get_relocate_addr(rel)		(rel)
-#define	flat_set_persistent(relval, p)		0
-
-#endif /* __ARM_FLAT_H__ */
diff --git a/include/asm-arm/floppy.h b/include/asm-arm/floppy.h
deleted file mode 100644
index 41a5e9d6bb69..000000000000
--- a/include/asm-arm/floppy.h
+++ /dev/null
@@ -1,148 +0,0 @@
-/*
- *  linux/include/asm-arm/floppy.h
- *
- *  Copyright (C) 1996-2000 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- *  Note that we don't touch FLOPPY_DMA nor FLOPPY_IRQ here
- */
-#ifndef __ASM_ARM_FLOPPY_H
-#define __ASM_ARM_FLOPPY_H
-#if 0
-#include <asm/arch/floppy.h>
-#endif
-
-#define fd_outb(val,port)			\
-	do {					\
-		if ((port) == FD_DOR)		\
-			fd_setdor((val));	\
-		else				\
-			outb((val),(port));	\
-	} while(0)
-
-#define fd_inb(port)		inb((port))
-#define fd_request_irq()	request_irq(IRQ_FLOPPYDISK,floppy_interrupt,\
-					    IRQF_DISABLED,"floppy",NULL)
-#define fd_free_irq()		free_irq(IRQ_FLOPPYDISK,NULL)
-#define fd_disable_irq()	disable_irq(IRQ_FLOPPYDISK)
-#define fd_enable_irq()		enable_irq(IRQ_FLOPPYDISK)
-
-static inline int fd_dma_setup(void *data, unsigned int length,
-			       unsigned int mode, unsigned long addr)
-{
-	set_dma_mode(DMA_FLOPPY, mode);
-	__set_dma_addr(DMA_FLOPPY, data);
-	set_dma_count(DMA_FLOPPY, length);
-	virtual_dma_port = addr;
-	enable_dma(DMA_FLOPPY);
-	return 0;
-}
-#define fd_dma_setup		fd_dma_setup
-
-#define fd_request_dma()	request_dma(DMA_FLOPPY,"floppy")
-#define fd_free_dma()		free_dma(DMA_FLOPPY)
-#define fd_disable_dma()	disable_dma(DMA_FLOPPY)
-
-/* need to clean up dma.h */
-#define DMA_FLOPPYDISK		DMA_FLOPPY
-
-/* Floppy_selects is the list of DOR's to select drive fd
- *
- * On initialisation, the floppy list is scanned, and the drives allocated
- * in the order that they are found.  This is done by seeking the drive
- * to a non-zero track, and then restoring it to track 0.  If an error occurs,
- * then there is no floppy drive present.       [to be put back in again]
- */
-static unsigned char floppy_selects[2][4] =
-{
-	{ 0x10, 0x21, 0x23, 0x33 },
-	{ 0x10, 0x21, 0x23, 0x33 }
-};
-
-#define fd_setdor(dor)								\
-do {										\
-	int new_dor = (dor);							\
-	if (new_dor & 0xf0)							\
-		new_dor = (new_dor & 0x0c) | floppy_selects[fdc][new_dor & 3];	\
-	else									\
-		new_dor &= 0x0c;						\
-	outb(new_dor, FD_DOR);							\
-} while (0)
-
-/*
- * Someday, we'll automatically detect which drives are present...
- */
-static inline void fd_scandrives (void)
-{
-#if 0
-	int floppy, drive_count;
-
-	fd_disable_irq();
-	raw_cmd = &default_raw_cmd;
-	raw_cmd->flags = FD_RAW_SPIN | FD_RAW_NEED_SEEK;
-	raw_cmd->track = 0;
-	raw_cmd->rate = ?;
-	drive_count = 0;
-	for (floppy = 0; floppy < 4; floppy ++) {
-		current_drive = drive_count;
-		/*
-		 * Turn on floppy motor
-		 */
-		if (start_motor(redo_fd_request))
-			continue;
-		/*
-		 * Set up FDC
-		 */
-		fdc_specify();
-		/*
-		 * Tell FDC to recalibrate
-		 */
-		output_byte(FD_RECALIBRATE);
-		LAST_OUT(UNIT(floppy));
-		/* wait for command to complete */
-		if (!successful) {
-			int i;
-			for (i = drive_count; i < 3; i--)
-				floppy_selects[fdc][i] = floppy_selects[fdc][i + 1];
-			floppy_selects[fdc][3] = 0;
-			floppy -= 1;
-		} else
-			drive_count++;
-	}
-#else
-	floppy_selects[0][0] = 0x10;
-	floppy_selects[0][1] = 0x21;
-	floppy_selects[0][2] = 0x23;
-	floppy_selects[0][3] = 0x33;
-#endif
-}
-
-#define FDC1 (0x3f0)
-
-#define FLOPPY0_TYPE 4
-#define FLOPPY1_TYPE 4
-
-#define N_FDC 1
-#define N_DRIVE 4
-
-#define CROSS_64KB(a,s) (0)
-
-/*
- * This allows people to reverse the order of
- * fd0 and fd1, in case their hardware is
- * strangely connected (as some RiscPCs
- * and A5000s seem to be).
- */
-static void driveswap(int *ints, int dummy, int dummy2)
-{
-	floppy_selects[0][0] ^= floppy_selects[0][1];
-	floppy_selects[0][1] ^= floppy_selects[0][0];
-	floppy_selects[0][0] ^= floppy_selects[0][1];
-}
-
-#define EXTRA_FLOPPY_PARAMS ,{ "driveswap", &driveswap, NULL, 0, 0 }
-	
-#endif
diff --git a/include/asm-arm/gpio.h b/include/asm-arm/gpio.h
deleted file mode 100644
index fff4f800ee42..000000000000
--- a/include/asm-arm/gpio.h
+++ /dev/null
@@ -1,7 +0,0 @@
-#ifndef _ARCH_ARM_GPIO_H
-#define _ARCH_ARM_GPIO_H
-
-/* not all ARM platforms necessarily support this API ... */
-#include <asm/arch/gpio.h>
-
-#endif /* _ARCH_ARM_GPIO_H */
diff --git a/include/asm-arm/hardware.h b/include/asm-arm/hardware.h
deleted file mode 100644
index 1fd1a5b6504b..000000000000
--- a/include/asm-arm/hardware.h
+++ /dev/null
@@ -1,18 +0,0 @@
-/*
- *  linux/include/asm-arm/hardware.h
- *
- *  Copyright (C) 1996 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- *  Common hardware definitions
- */
-
-#ifndef __ASM_HARDWARE_H
-#define __ASM_HARDWARE_H
-
-#include <asm/arch/hardware.h>
-
-#endif
diff --git a/include/asm-arm/hw_irq.h b/include/asm-arm/hw_irq.h
deleted file mode 100644
index f1a08a500604..000000000000
--- a/include/asm-arm/hw_irq.h
+++ /dev/null
@@ -1,9 +0,0 @@
-/*
- * Nothing to see here yet
- */
-#ifndef _ARCH_ARM_HW_IRQ_H
-#define _ARCH_ARM_HW_IRQ_H
-
-#include <asm/mach/irq.h>
-
-#endif
diff --git a/include/asm-arm/ide.h b/include/asm-arm/ide.h
deleted file mode 100644
index a48019f99d08..000000000000
--- a/include/asm-arm/ide.h
+++ /dev/null
@@ -1,23 +0,0 @@
-/*
- *  linux/include/asm-arm/ide.h
- *
- *  Copyright (C) 1994-1996  Linus Torvalds & authors
- */
-
-/*
- *  This file contains the ARM architecture specific IDE code.
- */
-
-#ifndef __ASMARM_IDE_H
-#define __ASMARM_IDE_H
-
-#ifdef __KERNEL__
-
-#define __ide_mm_insw(port,addr,len)	readsw(port,addr,len)
-#define __ide_mm_insl(port,addr,len)	readsl(port,addr,len)
-#define __ide_mm_outsw(port,addr,len)	writesw(port,addr,len)
-#define __ide_mm_outsl(port,addr,len)	writesl(port,addr,len)
-
-#endif /* __KERNEL__ */
-
-#endif /* __ASMARM_IDE_H */
diff --git a/include/asm-arm/io.h b/include/asm-arm/io.h
deleted file mode 100644
index eebe56e74d6d..000000000000
--- a/include/asm-arm/io.h
+++ /dev/null
@@ -1,287 +0,0 @@
-/*
- *  linux/include/asm-arm/io.h
- *
- *  Copyright (C) 1996-2000 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * Modifications:
- *  16-Sep-1996	RMK	Inlined the inx/outx functions & optimised for both
- *			constant addresses and variable addresses.
- *  04-Dec-1997	RMK	Moved a lot of this stuff to the new architecture
- *			specific IO header files.
- *  27-Mar-1999	PJB	Second parameter of memcpy_toio is const..
- *  04-Apr-1999	PJB	Added check_signature.
- *  12-Dec-1999	RMK	More cleanups
- *  18-Jun-2000 RMK	Removed virt_to_* and friends definitions
- *  05-Oct-2004 BJD     Moved memory string functions to use void __iomem
- */
-#ifndef __ASM_ARM_IO_H
-#define __ASM_ARM_IO_H
-
-#ifdef __KERNEL__
-
-#include <linux/types.h>
-#include <asm/byteorder.h>
-#include <asm/memory.h>
-
-/*
- * ISA I/O bus memory addresses are 1:1 with the physical address.
- */
-#define isa_virt_to_bus virt_to_phys
-#define isa_page_to_bus page_to_phys
-#define isa_bus_to_virt phys_to_virt
-
-/*
- * Generic IO read/write.  These perform native-endian accesses.  Note
- * that some architectures will want to re-define __raw_{read,write}w.
- */
-extern void __raw_writesb(void __iomem *addr, const void *data, int bytelen);
-extern void __raw_writesw(void __iomem *addr, const void *data, int wordlen);
-extern void __raw_writesl(void __iomem *addr, const void *data, int longlen);
-
-extern void __raw_readsb(const void __iomem *addr, void *data, int bytelen);
-extern void __raw_readsw(const void __iomem *addr, void *data, int wordlen);
-extern void __raw_readsl(const void __iomem *addr, void *data, int longlen);
-
-#define __raw_writeb(v,a)	(__chk_io_ptr(a), *(volatile unsigned char __force  *)(a) = (v))
-#define __raw_writew(v,a)	(__chk_io_ptr(a), *(volatile unsigned short __force *)(a) = (v))
-#define __raw_writel(v,a)	(__chk_io_ptr(a), *(volatile unsigned int __force   *)(a) = (v))
-
-#define __raw_readb(a)		(__chk_io_ptr(a), *(volatile unsigned char __force  *)(a))
-#define __raw_readw(a)		(__chk_io_ptr(a), *(volatile unsigned short __force *)(a))
-#define __raw_readl(a)		(__chk_io_ptr(a), *(volatile unsigned int __force   *)(a))
-
-/*
- * Architecture ioremap implementation.
- */
-#define MT_DEVICE		0
-#define MT_DEVICE_NONSHARED	1
-#define MT_DEVICE_CACHED	2
-#define MT_DEVICE_IXP2000	3
-/*
- * types 4 onwards can be found in asm/mach/map.h and are undefined
- * for ioremap
- */
-
-/*
- * __arm_ioremap takes CPU physical address.
- * __arm_ioremap_pfn takes a Page Frame Number and an offset into that page
- */
-extern void __iomem * __arm_ioremap_pfn(unsigned long, unsigned long, size_t, unsigned int);
-extern void __iomem * __arm_ioremap(unsigned long, size_t, unsigned int);
-extern void __iounmap(volatile void __iomem *addr);
-
-/*
- * Bad read/write accesses...
- */
-extern void __readwrite_bug(const char *fn);
-
-/*
- * Now, pick up the machine-defined IO definitions
- */
-#include <asm/arch/io.h>
-
-/*
- *  IO port access primitives
- *  -------------------------
- *
- * The ARM doesn't have special IO access instructions; all IO is memory
- * mapped.  Note that these are defined to perform little endian accesses
- * only.  Their primary purpose is to access PCI and ISA peripherals.
- *
- * Note that for a big endian machine, this implies that the following
- * big endian mode connectivity is in place, as described by numerous
- * ARM documents:
- *
- *    PCI:  D0-D7   D8-D15 D16-D23 D24-D31
- *    ARM: D24-D31 D16-D23  D8-D15  D0-D7
- *
- * The machine specific io.h include defines __io to translate an "IO"
- * address to a memory address.
- *
- * Note that we prevent GCC re-ordering or caching values in expressions
- * by introducing sequence points into the in*() definitions.  Note that
- * __raw_* do not guarantee this behaviour.
- *
- * The {in,out}[bwl] macros are for emulating x86-style PCI/ISA IO space.
- */
-#ifdef __io
-#define outb(v,p)		__raw_writeb(v,__io(p))
-#define outw(v,p)		__raw_writew((__force __u16) \
-					cpu_to_le16(v),__io(p))
-#define outl(v,p)		__raw_writel((__force __u32) \
-					cpu_to_le32(v),__io(p))
-
-#define inb(p)	({ __u8 __v = __raw_readb(__io(p)); __v; })
-#define inw(p)	({ __u16 __v = le16_to_cpu((__force __le16) \
-			__raw_readw(__io(p))); __v; })
-#define inl(p)	({ __u32 __v = le32_to_cpu((__force __le32) \
-			__raw_readl(__io(p))); __v; })
-
-#define outsb(p,d,l)		__raw_writesb(__io(p),d,l)
-#define outsw(p,d,l)		__raw_writesw(__io(p),d,l)
-#define outsl(p,d,l)		__raw_writesl(__io(p),d,l)
-
-#define insb(p,d,l)		__raw_readsb(__io(p),d,l)
-#define insw(p,d,l)		__raw_readsw(__io(p),d,l)
-#define insl(p,d,l)		__raw_readsl(__io(p),d,l)
-#endif
-
-#define outb_p(val,port)	outb((val),(port))
-#define outw_p(val,port)	outw((val),(port))
-#define outl_p(val,port)	outl((val),(port))
-#define inb_p(port)		inb((port))
-#define inw_p(port)		inw((port))
-#define inl_p(port)		inl((port))
-
-#define outsb_p(port,from,len)	outsb(port,from,len)
-#define outsw_p(port,from,len)	outsw(port,from,len)
-#define outsl_p(port,from,len)	outsl(port,from,len)
-#define insb_p(port,to,len)	insb(port,to,len)
-#define insw_p(port,to,len)	insw(port,to,len)
-#define insl_p(port,to,len)	insl(port,to,len)
-
-/*
- * String version of IO memory access ops:
- */
-extern void _memcpy_fromio(void *, const volatile void __iomem *, size_t);
-extern void _memcpy_toio(volatile void __iomem *, const void *, size_t);
-extern void _memset_io(volatile void __iomem *, int, size_t);
-
-#define mmiowb()
-
-/*
- *  Memory access primitives
- *  ------------------------
- *
- * These perform PCI memory accesses via an ioremap region.  They don't
- * take an address as such, but a cookie.
- *
- * Again, this are defined to perform little endian accesses.  See the
- * IO port primitives for more information.
- */
-#ifdef __mem_pci
-#define readb(c) ({ __u8  __v = __raw_readb(__mem_pci(c)); __v; })
-#define readw(c) ({ __u16 __v = le16_to_cpu((__force __le16) \
-					__raw_readw(__mem_pci(c))); __v; })
-#define readl(c) ({ __u32 __v = le32_to_cpu((__force __le32) \
-					__raw_readl(__mem_pci(c))); __v; })
-#define readb_relaxed(addr) readb(addr)
-#define readw_relaxed(addr) readw(addr)
-#define readl_relaxed(addr) readl(addr)
-
-#define readsb(p,d,l)		__raw_readsb(__mem_pci(p),d,l)
-#define readsw(p,d,l)		__raw_readsw(__mem_pci(p),d,l)
-#define readsl(p,d,l)		__raw_readsl(__mem_pci(p),d,l)
-
-#define writeb(v,c)		__raw_writeb(v,__mem_pci(c))
-#define writew(v,c)		__raw_writew((__force __u16) \
-					cpu_to_le16(v),__mem_pci(c))
-#define writel(v,c)		__raw_writel((__force __u32) \
-					cpu_to_le32(v),__mem_pci(c))
-
-#define writesb(p,d,l)		__raw_writesb(__mem_pci(p),d,l)
-#define writesw(p,d,l)		__raw_writesw(__mem_pci(p),d,l)
-#define writesl(p,d,l)		__raw_writesl(__mem_pci(p),d,l)
-
-#define memset_io(c,v,l)	_memset_io(__mem_pci(c),(v),(l))
-#define memcpy_fromio(a,c,l)	_memcpy_fromio((a),__mem_pci(c),(l))
-#define memcpy_toio(c,a,l)	_memcpy_toio(__mem_pci(c),(a),(l))
-
-#elif !defined(readb)
-
-#define readb(c)			(__readwrite_bug("readb"),0)
-#define readw(c)			(__readwrite_bug("readw"),0)
-#define readl(c)			(__readwrite_bug("readl"),0)
-#define writeb(v,c)			__readwrite_bug("writeb")
-#define writew(v,c)			__readwrite_bug("writew")
-#define writel(v,c)			__readwrite_bug("writel")
-
-#define check_signature(io,sig,len)	(0)
-
-#endif	/* __mem_pci */
-
-/*
- * ioremap and friends.
- *
- * ioremap takes a PCI memory address, as specified in
- * Documentation/IO-mapping.txt.
- *
- */
-#ifndef __arch_ioremap
-#define ioremap(cookie,size)		__arm_ioremap(cookie, size, MT_DEVICE)
-#define ioremap_nocache(cookie,size)	__arm_ioremap(cookie, size, MT_DEVICE)
-#define ioremap_cached(cookie,size)	__arm_ioremap(cookie, size, MT_DEVICE_CACHED)
-#define iounmap(cookie)			__iounmap(cookie)
-#else
-#define ioremap(cookie,size)		__arch_ioremap((cookie), (size), MT_DEVICE)
-#define ioremap_nocache(cookie,size)	__arch_ioremap((cookie), (size), MT_DEVICE)
-#define ioremap_cached(cookie,size)	__arch_ioremap((cookie), (size), MT_DEVICE_CACHED)
-#define iounmap(cookie)			__arch_iounmap(cookie)
-#endif
-
-/*
- * io{read,write}{8,16,32} macros
- */
-#ifndef ioread8
-#define ioread8(p)	({ unsigned int __v = __raw_readb(p); __v; })
-#define ioread16(p)	({ unsigned int __v = le16_to_cpu((__force __le16)__raw_readw(p)); __v; })
-#define ioread32(p)	({ unsigned int __v = le32_to_cpu((__force __le32)__raw_readl(p)); __v; })
-
-#define iowrite8(v,p)	__raw_writeb(v, p)
-#define iowrite16(v,p)	__raw_writew((__force __u16)cpu_to_le16(v), p)
-#define iowrite32(v,p)	__raw_writel((__force __u32)cpu_to_le32(v), p)
-
-#define ioread8_rep(p,d,c)	__raw_readsb(p,d,c)
-#define ioread16_rep(p,d,c)	__raw_readsw(p,d,c)
-#define ioread32_rep(p,d,c)	__raw_readsl(p,d,c)
-
-#define iowrite8_rep(p,s,c)	__raw_writesb(p,s,c)
-#define iowrite16_rep(p,s,c)	__raw_writesw(p,s,c)
-#define iowrite32_rep(p,s,c)	__raw_writesl(p,s,c)
-
-extern void __iomem *ioport_map(unsigned long port, unsigned int nr);
-extern void ioport_unmap(void __iomem *addr);
-#endif
-
-struct pci_dev;
-
-extern void __iomem *pci_iomap(struct pci_dev *dev, int bar, unsigned long maxlen);
-extern void pci_iounmap(struct pci_dev *dev, void __iomem *addr);
-
-/*
- * can the hardware map this into one segment or not, given no other
- * constraints.
- */
-#define BIOVEC_MERGEABLE(vec1, vec2)	\
-	((bvec_to_phys((vec1)) + (vec1)->bv_len) == bvec_to_phys((vec2)))
-
-#ifdef CONFIG_MMU
-#define ARCH_HAS_VALID_PHYS_ADDR_RANGE
-extern int valid_phys_addr_range(unsigned long addr, size_t size);
-extern int valid_mmap_phys_addr_range(unsigned long pfn, size_t size);
-#endif
-
-/*
- * Convert a physical pointer to a virtual kernel pointer for /dev/mem
- * access
- */
-#define xlate_dev_mem_ptr(p)	__va(p)
-
-/*
- * Convert a virtual cached pointer to an uncached pointer
- */
-#define xlate_dev_kmem_ptr(p)	p
-
-/*
- * Register ISA memory and port locations for glibc iopl/inb/outb
- * emulation.
- */
-extern void register_isa_ports(unsigned int mmio, unsigned int io,
-			       unsigned int io_shift);
-
-#endif	/* __KERNEL__ */
-#endif	/* __ASM_ARM_IO_H */
diff --git a/include/asm-arm/irq.h b/include/asm-arm/irq.h
deleted file mode 100644
index 1b882a255e35..000000000000
--- a/include/asm-arm/irq.h
+++ /dev/null
@@ -1,45 +0,0 @@
-#ifndef __ASM_ARM_IRQ_H
-#define __ASM_ARM_IRQ_H
-
-#include <asm/arch/irqs.h>
-
-#ifndef irq_canonicalize
-#define irq_canonicalize(i)	(i)
-#endif
-
-#ifndef NR_IRQS
-#define NR_IRQS	128
-#endif
-
-/*
- * Use this value to indicate lack of interrupt
- * capability
- */
-#ifndef NO_IRQ
-#define NO_IRQ	((unsigned int)(-1))
-#endif
-
-
-/*
- * Migration helpers
- */
-#define __IRQT_FALEDGE	IRQ_TYPE_EDGE_FALLING
-#define __IRQT_RISEDGE	IRQ_TYPE_EDGE_RISING
-#define __IRQT_LOWLVL	IRQ_TYPE_LEVEL_LOW
-#define __IRQT_HIGHLVL	IRQ_TYPE_LEVEL_HIGH
-
-#define IRQT_NOEDGE	(0)
-#define IRQT_RISING	(__IRQT_RISEDGE)
-#define IRQT_FALLING	(__IRQT_FALEDGE)
-#define IRQT_BOTHEDGE	(__IRQT_RISEDGE|__IRQT_FALEDGE)
-#define IRQT_LOW	(__IRQT_LOWLVL)
-#define IRQT_HIGH	(__IRQT_HIGHLVL)
-#define IRQT_PROBE	IRQ_TYPE_PROBE
-
-#ifndef __ASSEMBLY__
-struct irqaction;
-extern void migrate_irqs(void);
-#endif
-
-#endif
-
diff --git a/include/asm-arm/kexec.h b/include/asm-arm/kexec.h
deleted file mode 100644
index c8986bb99ed5..000000000000
--- a/include/asm-arm/kexec.h
+++ /dev/null
@@ -1,31 +0,0 @@
-#ifndef _ARM_KEXEC_H
-#define _ARM_KEXEC_H
-
-#ifdef CONFIG_KEXEC
-
-/* Maximum physical address we can use pages from */
-#define KEXEC_SOURCE_MEMORY_LIMIT (-1UL)
-/* Maximum address we can reach in physical address mode */
-#define KEXEC_DESTINATION_MEMORY_LIMIT (-1UL)
-/* Maximum address we can use for the control code buffer */
-#define KEXEC_CONTROL_MEMORY_LIMIT (-1UL)
-
-#define KEXEC_CONTROL_CODE_SIZE	4096
-
-#define KEXEC_ARCH KEXEC_ARCH_ARM
-
-#define KEXEC_ARM_ATAGS_OFFSET  0x1000
-#define KEXEC_ARM_ZIMAGE_OFFSET 0x8000
-
-#ifndef __ASSEMBLY__
-
-struct kimage;
-/* Provide a dummy definition to avoid build failures. */
-static inline void crash_setup_regs(struct pt_regs *newregs,
-                                        struct pt_regs *oldregs) { }
-
-#endif /* __ASSEMBLY__ */
-
-#endif /* CONFIG_KEXEC */
-
-#endif /* _ARM_KEXEC_H */
diff --git a/include/asm-arm/kprobes.h b/include/asm-arm/kprobes.h
deleted file mode 100644
index b1a37876942d..000000000000
--- a/include/asm-arm/kprobes.h
+++ /dev/null
@@ -1,79 +0,0 @@
-/*
- * include/asm-arm/kprobes.h
- *
- * Copyright (C) 2006, 2007 Motorola Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- * General Public License for more details.
- */
-
-#ifndef _ARM_KPROBES_H
-#define _ARM_KPROBES_H
-
-#include <linux/types.h>
-#include <linux/ptrace.h>
-#include <linux/percpu.h>
-
-#define __ARCH_WANT_KPROBES_INSN_SLOT
-#define MAX_INSN_SIZE			2
-#define MAX_STACK_SIZE			64	/* 32 would probably be OK */
-
-/*
- * This undefined instruction must be unique and
- * reserved solely for kprobes' use.
- */
-#define KPROBE_BREAKPOINT_INSTRUCTION	0xe7f001f8
-
-#define regs_return_value(regs)		((regs)->ARM_r0)
-#define flush_insn_slot(p)		do { } while (0)
-#define kretprobe_blacklist_size	0
-
-typedef u32 kprobe_opcode_t;
-
-struct kprobe;
-typedef void (kprobe_insn_handler_t)(struct kprobe *, struct pt_regs *);
-
-/* Architecture specific copy of original instruction. */
-struct arch_specific_insn {
-	kprobe_opcode_t		*insn;
-	kprobe_insn_handler_t	*insn_handler;
-};
-
-struct prev_kprobe {
-	struct kprobe *kp;
-	unsigned int status;
-};
-
-/* per-cpu kprobe control block */
-struct kprobe_ctlblk {
-	unsigned int kprobe_status;
-	struct prev_kprobe prev_kprobe;
-	struct pt_regs jprobe_saved_regs;
-	char jprobes_stack[MAX_STACK_SIZE];
-};
-
-void arch_remove_kprobe(struct kprobe *);
-void kretprobe_trampoline(void);
-
-int kprobe_trap_handler(struct pt_regs *regs, unsigned int instr);
-int kprobe_fault_handler(struct pt_regs *regs, unsigned int fsr);
-int kprobe_exceptions_notify(struct notifier_block *self,
-			     unsigned long val, void *data);
-
-enum kprobe_insn {
-	INSN_REJECTED,
-	INSN_GOOD,
-	INSN_GOOD_NO_SLOT
-};
-
-enum kprobe_insn arm_kprobe_decode_insn(kprobe_opcode_t,
-					struct arch_specific_insn *);
-void __init arm_kprobe_decode_init(void);
-
-#endif /* _ARM_KPROBES_H */
diff --git a/include/asm-arm/kvm.h b/include/asm-arm/kvm.h
deleted file mode 100644
index cb3c08cbcb9e..000000000000
--- a/include/asm-arm/kvm.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef __LINUX_KVM_ARM_H
-#define __LINUX_KVM_ARM_H
-
-/* arm does not support KVM */
-
-#endif
diff --git a/include/asm-arm/mach/dma.h b/include/asm-arm/mach/dma.h
deleted file mode 100644
index e7c4a20aad53..000000000000
--- a/include/asm-arm/mach/dma.h
+++ /dev/null
@@ -1,57 +0,0 @@
-/*
- *  linux/include/asm-arm/mach/dma.h
- *
- *  Copyright (C) 1998-2000 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- *  This header file describes the interface between the generic DMA handler
- *  (dma.c) and the architecture-specific DMA backends (dma-*.c)
- */
-
-struct dma_struct;
-typedef struct dma_struct dma_t;
-
-struct dma_ops {
-	int	(*request)(dmach_t, dma_t *);		/* optional */
-	void	(*free)(dmach_t, dma_t *);		/* optional */
-	void	(*enable)(dmach_t, dma_t *);		/* mandatory */
-	void 	(*disable)(dmach_t, dma_t *);		/* mandatory */
-	int	(*residue)(dmach_t, dma_t *);		/* optional */
-	int	(*setspeed)(dmach_t, dma_t *, int);	/* optional */
-	char	*type;
-};
-
-struct dma_struct {
-	void		*addr;		/* single DMA address		*/
-	unsigned long	count;		/* single DMA size		*/
-	struct scatterlist buf;		/* single DMA			*/
-	int		sgcount;	/* number of DMA SG		*/
-	struct scatterlist *sg;		/* DMA Scatter-Gather List	*/
-
-	unsigned int	active:1;	/* Transfer active		*/
-	unsigned int	invalid:1;	/* Address/Count changed	*/
-
-	dmamode_t	dma_mode;	/* DMA mode			*/
-	int		speed;		/* DMA speed			*/
-
-	unsigned int	lock;		/* Device is allocated		*/
-	const char	*device_id;	/* Device name			*/
-
-	unsigned int	dma_base;	/* Controller base address	*/
-	int		dma_irq;	/* Controller IRQ		*/
-	struct scatterlist cur_sg;	/* Current controller buffer	*/
-	unsigned int	state;
-
-	struct dma_ops	*d_ops;
-};
-
-/* Prototype: void arch_dma_init(dma)
- * Purpose  : Initialise architecture specific DMA
- * Params   : dma - pointer to array of DMA structures
- */
-extern void arch_dma_init(dma_t *dma);
-
-extern void isa_init_dma(dma_t *dma);
diff --git a/include/asm-arm/mach/irda.h b/include/asm-arm/mach/irda.h
deleted file mode 100644
index 58984d9c0b0b..000000000000
--- a/include/asm-arm/mach/irda.h
+++ /dev/null
@@ -1,20 +0,0 @@
-/*
- *  linux/include/asm-arm/mach/irda.h
- *
- *  Copyright (C) 2004 Russell King.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#ifndef __ASM_ARM_MACH_IRDA_H
-#define __ASM_ARM_MACH_IRDA_H
-
-struct irda_platform_data {
-	int (*startup)(struct device *);
-	void (*shutdown)(struct device *);
-	int (*set_power)(struct device *, unsigned int state);
-	void (*set_speed)(struct device *, unsigned int speed);
-};
-
-#endif
diff --git a/include/asm-arm/mach/irq.h b/include/asm-arm/mach/irq.h
deleted file mode 100644
index eb0bfba6570d..000000000000
--- a/include/asm-arm/mach/irq.h
+++ /dev/null
@@ -1,54 +0,0 @@
-/*
- *  linux/include/asm-arm/mach/irq.h
- *
- *  Copyright (C) 1995-2000 Russell King.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#ifndef __ASM_ARM_MACH_IRQ_H
-#define __ASM_ARM_MACH_IRQ_H
-
-#include <linux/irq.h>
-
-struct seq_file;
-
-/*
- * This is internal.  Do not use it.
- */
-extern void (*init_arch_irq)(void);
-extern void init_FIQ(void);
-extern int show_fiq_list(struct seq_file *, void *);
-
-/*
- * Obsolete inline function for calling irq descriptor handlers.
- */
-static inline void desc_handle_irq(unsigned int irq, struct irq_desc *desc)
-{
-	desc->handle_irq(irq, desc);
-}
-
-void set_irq_flags(unsigned int irq, unsigned int flags);
-
-#define IRQF_VALID	(1 << 0)
-#define IRQF_PROBE	(1 << 1)
-#define IRQF_NOAUTOEN	(1 << 2)
-
-/*
- * This is for easy migration, but should be changed in the source
- */
-#define do_bad_IRQ(irq,desc)				\
-do {							\
-	spin_lock(&desc->lock);				\
-	handle_bad_irq(irq, desc);			\
-	spin_unlock(&desc->lock);			\
-} while(0)
-
-extern unsigned long irq_err_count;
-static inline void ack_bad_irq(int irq)
-{
-	irq_err_count++;
-}
-
-#endif
diff --git a/include/asm-arm/mach/map.h b/include/asm-arm/mach/map.h
deleted file mode 100644
index 7ef3c8390180..000000000000
--- a/include/asm-arm/mach/map.h
+++ /dev/null
@@ -1,36 +0,0 @@
-/*
- *  linux/include/asm-arm/map.h
- *
- *  Copyright (C) 1999-2000 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- *  Page table mapping constructs and function prototypes
- */
-#include <asm/io.h>
-
-struct map_desc {
-	unsigned long virtual;
-	unsigned long pfn;
-	unsigned long length;
-	unsigned int type;
-};
-
-/* types 0-3 are defined in asm/io.h */
-#define MT_CACHECLEAN		4
-#define MT_MINICLEAN		5
-#define MT_LOW_VECTORS		6
-#define MT_HIGH_VECTORS		7
-#define MT_MEMORY		8
-#define MT_ROM			9
-
-#define MT_NONSHARED_DEVICE	MT_DEVICE_NONSHARED
-#define MT_IXP2000_DEVICE	MT_DEVICE_IXP2000
-
-#ifdef CONFIG_MMU
-extern void iotable_init(struct map_desc *, int);
-#else
-#define iotable_init(map,num)	do { } while (0)
-#endif
diff --git a/include/asm-arm/mach/mmc.h b/include/asm-arm/mach/mmc.h
deleted file mode 100644
index eb91145c00c4..000000000000
--- a/include/asm-arm/mach/mmc.h
+++ /dev/null
@@ -1,15 +0,0 @@
-/*
- *  linux/include/asm-arm/mach/mmc.h
- */
-#ifndef ASMARM_MACH_MMC_H
-#define ASMARM_MACH_MMC_H
-
-#include <linux/mmc/host.h>
-
-struct mmc_platform_data {
-	unsigned int ocr_mask;			/* available voltages */
-	u32 (*translate_vdd)(struct device *, unsigned int);
-	unsigned int (*status)(struct device *);
-};
-
-#endif
diff --git a/include/asm-arm/mach/pci.h b/include/asm-arm/mach/pci.h
deleted file mode 100644
index 9d4f6b5ea419..000000000000
--- a/include/asm-arm/mach/pci.h
+++ /dev/null
@@ -1,72 +0,0 @@
-/*
- *  linux/include/asm-arm/mach/pci.h
- *
- *  Copyright (C) 2000 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-struct pci_sys_data;
-struct pci_bus;
-
-struct hw_pci {
-	struct list_head buses;
-	int		nr_controllers;
-	int		(*setup)(int nr, struct pci_sys_data *);
-	struct pci_bus *(*scan)(int nr, struct pci_sys_data *);
-	void		(*preinit)(void);
-	void		(*postinit)(void);
-	u8		(*swizzle)(struct pci_dev *dev, u8 *pin);
-	int		(*map_irq)(struct pci_dev *dev, u8 slot, u8 pin);
-};
-
-/*
- * Per-controller structure
- */
-struct pci_sys_data {
-	struct list_head node;
-	int		busnr;		/* primary bus number			*/
-	u64		mem_offset;	/* bus->cpu memory mapping offset	*/
-	unsigned long	io_offset;	/* bus->cpu IO mapping offset		*/
-	struct pci_bus	*bus;		/* PCI bus				*/
-	struct resource *resource[3];	/* Primary PCI bus resources		*/
-					/* Bridge swizzling			*/
-	u8		(*swizzle)(struct pci_dev *, u8 *);
-					/* IRQ mapping				*/
-	int		(*map_irq)(struct pci_dev *, u8, u8);
-	struct hw_pci	*hw;
-};
-
-/*
- * This is the standard PCI-PCI bridge swizzling algorithm.
- */
-u8 pci_std_swizzle(struct pci_dev *dev, u8 *pinp);
-
-/*
- * Call this with your hw_pci struct to initialise the PCI system.
- */
-void pci_common_init(struct hw_pci *);
-
-/*
- * PCI controllers
- */
-extern int iop3xx_pci_setup(int nr, struct pci_sys_data *);
-extern struct pci_bus *iop3xx_pci_scan_bus(int nr, struct pci_sys_data *);
-extern void iop3xx_pci_preinit(void);
-extern void iop3xx_pci_preinit_cond(void);
-
-extern int dc21285_setup(int nr, struct pci_sys_data *);
-extern struct pci_bus *dc21285_scan_bus(int nr, struct pci_sys_data *);
-extern void dc21285_preinit(void);
-extern void dc21285_postinit(void);
-
-extern int via82c505_setup(int nr, struct pci_sys_data *);
-extern struct pci_bus *via82c505_scan_bus(int nr, struct pci_sys_data *);
-extern void via82c505_init(void *sysdata);
-
-extern int pci_v3_setup(int nr, struct pci_sys_data *);
-extern struct pci_bus *pci_v3_scan_bus(int nr, struct pci_sys_data *);
-extern void pci_v3_preinit(void);
-extern void pci_v3_postinit(void);
diff --git a/include/asm-arm/mach/time.h b/include/asm-arm/mach/time.h
deleted file mode 100644
index 2fd36ea0130d..000000000000
--- a/include/asm-arm/mach/time.h
+++ /dev/null
@@ -1,57 +0,0 @@
-/*
- * linux/include/asm-arm/mach/time.h
- *
- * Copyright (C) 2004 MontaVista Software, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#ifndef __ASM_ARM_MACH_TIME_H
-#define __ASM_ARM_MACH_TIME_H
-
-#include <linux/sysdev.h>
-
-/*
- * This is our kernel timer structure.
- *
- * - init
- *   Initialise the kernels jiffy timer source, claim interrupt
- *   using setup_irq.  This is called early on during initialisation
- *   while interrupts are still disabled on the local CPU.
- * - suspend
- *   Suspend the kernel jiffy timer source, if necessary.  This
- *   is called with interrupts disabled, after all normal devices
- *   have been suspended.  If no action is required, set this to
- *   NULL.
- * - resume
- *   Resume the kernel jiffy timer source, if necessary.  This
- *   is called with interrupts disabled before any normal devices
- *   are resumed.  If no action is required, set this to NULL.
- * - offset
- *   Return the timer offset in microseconds since the last timer
- *   interrupt.  Note: this must take account of any unprocessed
- *   timer interrupt which may be pending.
- */
-struct sys_timer {
-	struct sys_device	dev;
-	void			(*init)(void);
-	void			(*suspend)(void);
-	void			(*resume)(void);
-#ifndef CONFIG_GENERIC_TIME
-	unsigned long		(*offset)(void);
-#endif
-};
-
-extern struct sys_timer *system_timer;
-extern void timer_tick(void);
-
-/*
- * Kernel time keeping support.
- */
-struct timespec;
-extern int (*set_rtc)(void);
-extern void save_time_delta(struct timespec *delta, struct timespec *rtc);
-extern void restore_time_delta(struct timespec *delta, struct timespec *rtc);
-
-#endif
diff --git a/include/asm-arm/mc146818rtc.h b/include/asm-arm/mc146818rtc.h
deleted file mode 100644
index 7b81e0c42543..000000000000
--- a/include/asm-arm/mc146818rtc.h
+++ /dev/null
@@ -1,28 +0,0 @@
-/*
- * Machine dependent access functions for RTC registers.
- */
-#ifndef _ASM_MC146818RTC_H
-#define _ASM_MC146818RTC_H
-
-#include <asm/arch/irqs.h>
-#include <asm/io.h>
-
-#ifndef RTC_PORT
-#define RTC_PORT(x)	(0x70 + (x))
-#define RTC_ALWAYS_BCD	1	/* RTC operates in binary mode */
-#endif
-
-/*
- * The yet supported machines all access the RTC index register via
- * an ISA port access but the way to access the date register differs ...
- */
-#define CMOS_READ(addr) ({ \
-outb_p((addr),RTC_PORT(0)); \
-inb_p(RTC_PORT(1)); \
-})
-#define CMOS_WRITE(val, addr) ({ \
-outb_p((addr),RTC_PORT(0)); \
-outb_p((val),RTC_PORT(1)); \
-})
-
-#endif /* _ASM_MC146818RTC_H */
diff --git a/include/asm-arm/memory.h b/include/asm-arm/memory.h
deleted file mode 100644
index 9ba4d7136e6b..000000000000
--- a/include/asm-arm/memory.h
+++ /dev/null
@@ -1,334 +0,0 @@
-/*
- *  linux/include/asm-arm/memory.h
- *
- *  Copyright (C) 2000-2002 Russell King
- *  modification for nommu, Hyok S. Choi, 2004
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- *  Note: this file should not be included by non-asm/.h files
- */
-#ifndef __ASM_ARM_MEMORY_H
-#define __ASM_ARM_MEMORY_H
-
-/*
- * Allow for constants defined here to be used from assembly code
- * by prepending the UL suffix only with actual C code compilation.
- */
-#ifndef __ASSEMBLY__
-#define UL(x) (x##UL)
-#else
-#define UL(x) (x)
-#endif
-
-#include <linux/compiler.h>
-#include <asm/arch/memory.h>
-#include <asm/sizes.h>
-
-#ifdef CONFIG_MMU
-
-#ifndef TASK_SIZE
-/*
- * TASK_SIZE - the maximum size of a user space task.
- * TASK_UNMAPPED_BASE - the lower boundary of the mmap VM area
- */
-#define TASK_SIZE		UL(0xbf000000)
-#define TASK_UNMAPPED_BASE	UL(0x40000000)
-#endif
-
-/*
- * The maximum size of a 26-bit user space task.
- */
-#define TASK_SIZE_26		UL(0x04000000)
-
-/*
- * Page offset: 3GB
- */
-#ifndef PAGE_OFFSET
-#define PAGE_OFFSET		UL(0xc0000000)
-#endif
-
-/*
- * The module space lives between the addresses given by TASK_SIZE
- * and PAGE_OFFSET - it must be within 32MB of the kernel text.
- */
-#define MODULE_END		(PAGE_OFFSET)
-#define MODULE_START		(MODULE_END - 16*1048576)
-
-#if TASK_SIZE > MODULE_START
-#error Top of user space clashes with start of module space
-#endif
-
-/*
- * The XIP kernel gets mapped at the bottom of the module vm area.
- * Since we use sections to map it, this macro replaces the physical address
- * with its virtual address while keeping offset from the base section.
- */
-#define XIP_VIRT_ADDR(physaddr)  (MODULE_START + ((physaddr) & 0x000fffff))
-
-/*
- * Allow 16MB-aligned ioremap pages
- */
-#define IOREMAP_MAX_ORDER	24
-
-#else /* CONFIG_MMU */
-
-/*
- * The limitation of user task size can grow up to the end of free ram region.
- * It is difficult to define and perhaps will never meet the original meaning
- * of this define that was meant to.
- * Fortunately, there is no reference for this in noMMU mode, for now.
- */
-#ifndef TASK_SIZE
-#define TASK_SIZE		(CONFIG_DRAM_SIZE)
-#endif
-
-#ifndef TASK_UNMAPPED_BASE
-#define TASK_UNMAPPED_BASE	UL(0x00000000)
-#endif
-
-#ifndef PHYS_OFFSET
-#define PHYS_OFFSET 		(CONFIG_DRAM_BASE)
-#endif
-
-#ifndef END_MEM
-#define END_MEM     		(CONFIG_DRAM_BASE + CONFIG_DRAM_SIZE)
-#endif
-
-#ifndef PAGE_OFFSET
-#define PAGE_OFFSET		(PHYS_OFFSET)
-#endif
-
-/*
- * The module can be at any place in ram in nommu mode.
- */
-#define MODULE_END		(END_MEM)
-#define MODULE_START		(PHYS_OFFSET)
-
-#endif /* !CONFIG_MMU */
-
-/*
- * Size of DMA-consistent memory region.  Must be multiple of 2M,
- * between 2MB and 14MB inclusive.
- */
-#ifndef CONSISTENT_DMA_SIZE
-#define CONSISTENT_DMA_SIZE SZ_2M
-#endif
-
-/*
- * Physical vs virtual RAM address space conversion.  These are
- * private definitions which should NOT be used outside memory.h
- * files.  Use virt_to_phys/phys_to_virt/__pa/__va instead.
- */
-#ifndef __virt_to_phys
-#define __virt_to_phys(x)	((x) - PAGE_OFFSET + PHYS_OFFSET)
-#define __phys_to_virt(x)	((x) - PHYS_OFFSET + PAGE_OFFSET)
-#endif
-
-/*
- * Convert a physical address to a Page Frame Number and back
- */
-#define	__phys_to_pfn(paddr)	((paddr) >> PAGE_SHIFT)
-#define	__pfn_to_phys(pfn)	((pfn) << PAGE_SHIFT)
-
-#ifndef __ASSEMBLY__
-
-/*
- * The DMA mask corresponding to the maximum bus address allocatable
- * using GFP_DMA.  The default here places no restriction on DMA
- * allocations.  This must be the smallest DMA mask in the system,
- * so a successful GFP_DMA allocation will always satisfy this.
- */
-#ifndef ISA_DMA_THRESHOLD
-#define ISA_DMA_THRESHOLD	(0xffffffffULL)
-#endif
-
-#ifndef arch_adjust_zones
-#define arch_adjust_zones(node,size,holes) do { } while (0)
-#endif
-
-/*
- * PFNs are used to describe any physical page; this means
- * PFN 0 == physical address 0.
- *
- * This is the PFN of the first RAM page in the kernel
- * direct-mapped view.  We assume this is the first page
- * of RAM in the mem_map as well.
- */
-#define PHYS_PFN_OFFSET	(PHYS_OFFSET >> PAGE_SHIFT)
-
-/*
- * These are *only* valid on the kernel direct mapped RAM memory.
- * Note: Drivers should NOT use these.  They are the wrong
- * translation for translating DMA addresses.  Use the driver
- * DMA support - see dma-mapping.h.
- */
-static inline unsigned long virt_to_phys(void *x)
-{
-	return __virt_to_phys((unsigned long)(x));
-}
-
-static inline void *phys_to_virt(unsigned long x)
-{
-	return (void *)(__phys_to_virt((unsigned long)(x)));
-}
-
-/*
- * Drivers should NOT use these either.
- */
-#define __pa(x)			__virt_to_phys((unsigned long)(x))
-#define __va(x)			((void *)__phys_to_virt((unsigned long)(x)))
-#define pfn_to_kaddr(pfn)	__va((pfn) << PAGE_SHIFT)
-
-/*
- * Virtual <-> DMA view memory address translations
- * Again, these are *only* valid on the kernel direct mapped RAM
- * memory.  Use of these is *deprecated* (and that doesn't mean
- * use the __ prefixed forms instead.)  See dma-mapping.h.
- */
-static inline __deprecated unsigned long virt_to_bus(void *x)
-{
-	return __virt_to_bus((unsigned long)x);
-}
-
-static inline __deprecated void *bus_to_virt(unsigned long x)
-{
-	return (void *)__bus_to_virt(x);
-}
-
-/*
- * Conversion between a struct page and a physical address.
- *
- * Note: when converting an unknown physical address to a
- * struct page, the resulting pointer must be validated
- * using VALID_PAGE().  It must return an invalid struct page
- * for any physical address not corresponding to a system
- * RAM address.
- *
- *  page_to_pfn(page)	convert a struct page * to a PFN number
- *  pfn_to_page(pfn)	convert a _valid_ PFN number to struct page *
- *  pfn_valid(pfn)	indicates whether a PFN number is valid
- *
- *  virt_to_page(k)	convert a _valid_ virtual address to struct page *
- *  virt_addr_valid(k)	indicates whether a virtual address is valid
- */
-#ifndef CONFIG_DISCONTIGMEM
-
-#define ARCH_PFN_OFFSET		PHYS_PFN_OFFSET
-
-#ifndef CONFIG_SPARSEMEM
-#define pfn_valid(pfn)		((pfn) >= PHYS_PFN_OFFSET && (pfn) < (PHYS_PFN_OFFSET + max_mapnr))
-#endif
-
-#define virt_to_page(kaddr)	pfn_to_page(__pa(kaddr) >> PAGE_SHIFT)
-#define virt_addr_valid(kaddr)	((unsigned long)(kaddr) >= PAGE_OFFSET && (unsigned long)(kaddr) < (unsigned long)high_memory)
-
-#define PHYS_TO_NID(addr)	(0)
-
-#else /* CONFIG_DISCONTIGMEM */
-
-/*
- * This is more complex.  We have a set of mem_map arrays spread
- * around in memory.
- */
-#include <linux/numa.h>
-
-#define arch_pfn_to_nid(pfn)	PFN_TO_NID(pfn)
-#define arch_local_page_offset(pfn, nid) LOCAL_MAP_NR((pfn) << PAGE_SHIFT)
-
-#define pfn_valid(pfn)						\
-	({							\
-		unsigned int nid = PFN_TO_NID(pfn);		\
-		int valid = nid < MAX_NUMNODES;			\
-		if (valid) {					\
-			pg_data_t *node = NODE_DATA(nid);	\
-			valid = (pfn - node->node_start_pfn) <	\
-				node->node_spanned_pages;	\
-		}						\
-		valid;						\
-	})
-
-#define virt_to_page(kaddr)					\
-	(ADDR_TO_MAPBASE(kaddr) + LOCAL_MAP_NR(kaddr))
-
-#define virt_addr_valid(kaddr)	(KVADDR_TO_NID(kaddr) < MAX_NUMNODES)
-
-/*
- * Common discontigmem stuff.
- *  PHYS_TO_NID is used by the ARM kernel/setup.c
- */
-#define PHYS_TO_NID(addr)	PFN_TO_NID((addr) >> PAGE_SHIFT)
-
-/*
- * Given a kaddr, ADDR_TO_MAPBASE finds the owning node of the memory
- * and returns the mem_map of that node.
- */
-#define ADDR_TO_MAPBASE(kaddr)	NODE_MEM_MAP(KVADDR_TO_NID(kaddr))
-
-/*
- * Given a page frame number, find the owning node of the memory
- * and returns the mem_map of that node.
- */
-#define PFN_TO_MAPBASE(pfn)	NODE_MEM_MAP(PFN_TO_NID(pfn))
-
-#ifdef NODE_MEM_SIZE_BITS
-#define NODE_MEM_SIZE_MASK	((1 << NODE_MEM_SIZE_BITS) - 1)
-
-/*
- * Given a kernel address, find the home node of the underlying memory.
- */
-#define KVADDR_TO_NID(addr) \
-	(((unsigned long)(addr) - PAGE_OFFSET) >> NODE_MEM_SIZE_BITS)
-
-/*
- * Given a page frame number, convert it to a node id.
- */
-#define PFN_TO_NID(pfn) \
-	(((pfn) - PHYS_PFN_OFFSET) >> (NODE_MEM_SIZE_BITS - PAGE_SHIFT))
-
-/*
- * Given a kaddr, LOCAL_MEM_MAP finds the owning node of the memory
- * and returns the index corresponding to the appropriate page in the
- * node's mem_map.
- */
-#define LOCAL_MAP_NR(addr) \
-	(((unsigned long)(addr) & NODE_MEM_SIZE_MASK) >> PAGE_SHIFT)
-
-#endif /* NODE_MEM_SIZE_BITS */
-
-#endif /* !CONFIG_DISCONTIGMEM */
-
-/*
- * For BIO.  "will die".  Kill me when bio_to_phys() and bvec_to_phys() die.
- */
-#define page_to_phys(page)	(page_to_pfn(page) << PAGE_SHIFT)
-
-/*
- * Optional device DMA address remapping. Do _not_ use directly!
- * We should really eliminate virt_to_bus() here - it's deprecated.
- */
-#ifndef __arch_page_to_dma
-#define page_to_dma(dev, page)		((dma_addr_t)__virt_to_bus((unsigned long)page_address(page)))
-#define dma_to_virt(dev, addr)		((void *)__bus_to_virt(addr))
-#define virt_to_dma(dev, addr)		((dma_addr_t)__virt_to_bus((unsigned long)(addr)))
-#else
-#define page_to_dma(dev, page)		(__arch_page_to_dma(dev, page))
-#define dma_to_virt(dev, addr)		(__arch_dma_to_virt(dev, addr))
-#define virt_to_dma(dev, addr)		(__arch_virt_to_dma(dev, addr))
-#endif
-
-/*
- * Optional coherency support.  Currently used only by selected
- * Intel XSC3-based systems.
- */
-#ifndef arch_is_coherent
-#define arch_is_coherent()		0
-#endif
-
-#endif
-
-#include <asm-generic/memory_model.h>
-
-#endif
diff --git a/include/asm-arm/mmu_context.h b/include/asm-arm/mmu_context.h
deleted file mode 100644
index 91b9dfdfed52..000000000000
--- a/include/asm-arm/mmu_context.h
+++ /dev/null
@@ -1,117 +0,0 @@
-/*
- *  linux/include/asm-arm/mmu_context.h
- *
- *  Copyright (C) 1996 Russell King.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- *  Changelog:
- *   27-06-1996	RMK	Created
- */
-#ifndef __ASM_ARM_MMU_CONTEXT_H
-#define __ASM_ARM_MMU_CONTEXT_H
-
-#include <linux/compiler.h>
-#include <asm/cacheflush.h>
-#include <asm/proc-fns.h>
-#include <asm-generic/mm_hooks.h>
-
-void __check_kvm_seq(struct mm_struct *mm);
-
-#ifdef CONFIG_CPU_HAS_ASID
-
-/*
- * On ARMv6, we have the following structure in the Context ID:
- *
- * 31                         7          0
- * +-------------------------+-----------+
- * |      process ID         |   ASID    |
- * +-------------------------+-----------+
- * |              context ID             |
- * +-------------------------------------+
- *
- * The ASID is used to tag entries in the CPU caches and TLBs.
- * The context ID is used by debuggers and trace logic, and
- * should be unique within all running processes.
- */
-#define ASID_BITS		8
-#define ASID_MASK		((~0) << ASID_BITS)
-#define ASID_FIRST_VERSION	(1 << ASID_BITS)
-
-extern unsigned int cpu_last_asid;
-
-void __init_new_context(struct task_struct *tsk, struct mm_struct *mm);
-void __new_context(struct mm_struct *mm);
-
-static inline void check_context(struct mm_struct *mm)
-{
-	if (unlikely((mm->context.id ^ cpu_last_asid) >> ASID_BITS))
-		__new_context(mm);
-
-	if (unlikely(mm->context.kvm_seq != init_mm.context.kvm_seq))
-		__check_kvm_seq(mm);
-}
-
-#define init_new_context(tsk,mm)	(__init_new_context(tsk,mm),0)
-
-#else
-
-static inline void check_context(struct mm_struct *mm)
-{
-	if (unlikely(mm->context.kvm_seq != init_mm.context.kvm_seq))
-		__check_kvm_seq(mm);
-}
-
-#define init_new_context(tsk,mm)	0
-
-#endif
-
-#define destroy_context(mm)		do { } while(0)
-
-/*
- * This is called when "tsk" is about to enter lazy TLB mode.
- *
- * mm:  describes the currently active mm context
- * tsk: task which is entering lazy tlb
- * cpu: cpu number which is entering lazy tlb
- *
- * tsk->mm will be NULL
- */
-static inline void
-enter_lazy_tlb(struct mm_struct *mm, struct task_struct *tsk)
-{
-}
-
-/*
- * This is the actual mm switch as far as the scheduler
- * is concerned.  No registers are touched.  We avoid
- * calling the CPU specific function when the mm hasn't
- * actually changed.
- */
-static inline void
-switch_mm(struct mm_struct *prev, struct mm_struct *next,
-	  struct task_struct *tsk)
-{
-#ifdef CONFIG_MMU
-	unsigned int cpu = smp_processor_id();
-
-#ifdef CONFIG_SMP
-	/* check for possible thread migration */
-	if (!cpus_empty(next->cpu_vm_mask) && !cpu_isset(cpu, next->cpu_vm_mask))
-		__flush_icache_all();
-#endif
-	if (!cpu_test_and_set(cpu, next->cpu_vm_mask) || prev != next) {
-		check_context(next);
-		cpu_switch_mm(next->pgd, next);
-		if (cache_is_vivt())
-			cpu_clear(cpu, prev->cpu_vm_mask);
-	}
-#endif
-}
-
-#define deactivate_mm(tsk,mm)	do { } while (0)
-#define activate_mm(prev,next)	switch_mm(prev, next, NULL)
-
-#endif
diff --git a/include/asm-arm/mmzone.h b/include/asm-arm/mmzone.h
deleted file mode 100644
index b87de151f0a4..000000000000
--- a/include/asm-arm/mmzone.h
+++ /dev/null
@@ -1,30 +0,0 @@
-/*
- *  linux/include/asm-arm/mmzone.h
- *
- *  1999-12-29	Nicolas Pitre		Created
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#ifndef __ASM_MMZONE_H
-#define __ASM_MMZONE_H
-
-/*
- * Currently defined in arch/arm/mm/discontig.c
- */
-extern pg_data_t discontig_node_data[];
-
-/*
- * Return a pointer to the node data for node n.
- */
-#define NODE_DATA(nid)		(&discontig_node_data[nid])
-
-/*
- * NODE_MEM_MAP gives the kaddr for the mem_map of the node.
- */
-#define NODE_MEM_MAP(nid)	(NODE_DATA(nid)->node_mem_map)
-
-#include <asm/arch/memory.h>
-
-#endif
diff --git a/include/asm-arm/mtd-xip.h b/include/asm-arm/mtd-xip.h
deleted file mode 100644
index 9eb127cc7db2..000000000000
--- a/include/asm-arm/mtd-xip.h
+++ /dev/null
@@ -1,26 +0,0 @@
-/*
- * MTD primitives for XIP support. Architecture specific functions
- *
- * Do not include this file directly. It's included from linux/mtd/xip.h
- * 
- * Author:	Nicolas Pitre
- * Created:	Nov 2, 2004
- * Copyright:	(C) 2004 MontaVista Software, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * $Id: xip.h,v 1.2 2004/12/01 15:49:10 nico Exp $
- */
-
-#ifndef __ARM_MTD_XIP_H__
-#define __ARM_MTD_XIP_H__
-
-#include <asm/hardware.h>
-#include <asm/arch/mtd-xip.h>
-
-/* fill instruction prefetch */
-#define xip_iprefetch() 	do { asm volatile (".rep 8; nop; .endr"); } while (0)
-
-#endif /* __ARM_MTD_XIP_H__ */
diff --git a/include/asm-arm/mutex.h b/include/asm-arm/mutex.h
deleted file mode 100644
index 020bd98710a1..000000000000
--- a/include/asm-arm/mutex.h
+++ /dev/null
@@ -1,127 +0,0 @@
-/*
- * include/asm-arm/mutex.h
- *
- * ARM optimized mutex locking primitives
- *
- * Please look into asm-generic/mutex-xchg.h for a formal definition.
- */
-#ifndef _ASM_MUTEX_H
-#define _ASM_MUTEX_H
-
-#if __LINUX_ARM_ARCH__ < 6
-/* On pre-ARMv6 hardware the swp based implementation is the most efficient. */
-# include <asm-generic/mutex-xchg.h>
-#else
-
-/*
- * Attempting to lock a mutex on ARMv6+ can be done with a bastardized
- * atomic decrement (it is not a reliable atomic decrement but it satisfies
- * the defined semantics for our purpose, while being smaller and faster
- * than a real atomic decrement or atomic swap.  The idea is to attempt
- * decrementing the lock value only once.  If once decremented it isn't zero,
- * or if its store-back fails due to a dispute on the exclusive store, we
- * simply bail out immediately through the slow path where the lock will be
- * reattempted until it succeeds.
- */
-static inline void
-__mutex_fastpath_lock(atomic_t *count, void (*fail_fn)(atomic_t *))
-{
-	int __ex_flag, __res;
-
-	__asm__ (
-
-		"ldrex	%0, [%2]	\n\t"
-		"sub	%0, %0, #1	\n\t"
-		"strex	%1, %0, [%2]	"
-
-		: "=&r" (__res), "=&r" (__ex_flag)
-		: "r" (&(count)->counter)
-		: "cc","memory" );
-
-	__res |= __ex_flag;
-	if (unlikely(__res != 0))
-		fail_fn(count);
-}
-
-static inline int
-__mutex_fastpath_lock_retval(atomic_t *count, int (*fail_fn)(atomic_t *))
-{
-	int __ex_flag, __res;
-
-	__asm__ (
-
-		"ldrex	%0, [%2]	\n\t"
-		"sub	%0, %0, #1	\n\t"
-		"strex	%1, %0, [%2]	"
-
-		: "=&r" (__res), "=&r" (__ex_flag)
-		: "r" (&(count)->counter)
-		: "cc","memory" );
-
-	__res |= __ex_flag;
-	if (unlikely(__res != 0))
-		__res = fail_fn(count);
-	return __res;
-}
-
-/*
- * Same trick is used for the unlock fast path. However the original value,
- * rather than the result, is used to test for success in order to have
- * better generated assembly.
- */
-static inline void
-__mutex_fastpath_unlock(atomic_t *count, void (*fail_fn)(atomic_t *))
-{
-	int __ex_flag, __res, __orig;
-
-	__asm__ (
-
-		"ldrex	%0, [%3]	\n\t"
-		"add	%1, %0, #1	\n\t"
-		"strex	%2, %1, [%3]	"
-
-		: "=&r" (__orig), "=&r" (__res), "=&r" (__ex_flag)
-		: "r" (&(count)->counter)
-		: "cc","memory" );
-
-	__orig |= __ex_flag;
-	if (unlikely(__orig != 0))
-		fail_fn(count);
-}
-
-/*
- * If the unlock was done on a contended lock, or if the unlock simply fails
- * then the mutex remains locked.
- */
-#define __mutex_slowpath_needs_to_unlock()	1
-
-/*
- * For __mutex_fastpath_trylock we use another construct which could be
- * described as a "single value cmpxchg".
- *
- * This provides the needed trylock semantics like cmpxchg would, but it is
- * lighter and less generic than a true cmpxchg implementation.
- */
-static inline int
-__mutex_fastpath_trylock(atomic_t *count, int (*fail_fn)(atomic_t *))
-{
-	int __ex_flag, __res, __orig;
-
-	__asm__ (
-
-		"1: ldrex	%0, [%3]	\n\t"
-		"subs		%1, %0, #1	\n\t"
-		"strexeq	%2, %1, [%3]	\n\t"
-		"movlt		%0, #0		\n\t"
-		"cmpeq		%2, #0		\n\t"
-		"bgt		1b		"
-
-		: "=&r" (__orig), "=&r" (__res), "=&r" (__ex_flag)
-		: "r" (&count->counter)
-		: "cc", "memory" );
-
-	return __orig;
-}
-
-#endif
-#endif
diff --git a/include/asm-arm/namei.h b/include/asm-arm/namei.h
deleted file mode 100644
index a402d3b9d0f7..000000000000
--- a/include/asm-arm/namei.h
+++ /dev/null
@@ -1,25 +0,0 @@
-/* 
- * linux/include/asm-arm/namei.h
- *
- * Routines to handle famous /usr/gnemul
- * Derived from the Sparc version of this file
- *
- * Included from linux/fs/namei.c
- */
-
-#ifndef __ASMARM_NAMEI_H
-#define __ASMARM_NAMEI_H
-
-#define ARM_BSD_EMUL "usr/gnemul/bsd/"
-
-static inline char *__emul_prefix(void)
-{
-	switch (current->personality) {
-	case PER_BSD:
-		return ARM_BSD_EMUL;
-	default:
-		return NULL;
-	}
-}
-
-#endif /* __ASMARM_NAMEI_H */
diff --git a/include/asm-arm/page.h b/include/asm-arm/page.h
deleted file mode 100644
index 7c5fc5582e5d..000000000000
--- a/include/asm-arm/page.h
+++ /dev/null
@@ -1,199 +0,0 @@
-/*
- *  linux/include/asm-arm/page.h
- *
- *  Copyright (C) 1995-2003 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#ifndef _ASMARM_PAGE_H
-#define _ASMARM_PAGE_H
-
-/* PAGE_SHIFT determines the page size */
-#define PAGE_SHIFT		12
-#define PAGE_SIZE		(1UL << PAGE_SHIFT)
-#define PAGE_MASK		(~(PAGE_SIZE-1))
-
-#ifndef __ASSEMBLY__
-
-#ifndef CONFIG_MMU
-
-#include "page-nommu.h"
-
-#else
-
-#include <asm/glue.h>
-
-/*
- *	User Space Model
- *	================
- *
- *	This section selects the correct set of functions for dealing with
- *	page-based copying and clearing for user space for the particular
- *	processor(s) we're building for.
- *
- *	We have the following to choose from:
- *	  v3		- ARMv3
- *	  v4wt		- ARMv4 with writethrough cache, without minicache
- *	  v4wb		- ARMv4 with writeback cache, without minicache
- *	  v4_mc		- ARMv4 with minicache
- *	  xscale	- Xscale
- *	  xsc3		- XScalev3
- */
-#undef _USER
-#undef MULTI_USER
-
-#ifdef CONFIG_CPU_COPY_V3
-# ifdef _USER
-#  define MULTI_USER 1
-# else
-#  define _USER v3
-# endif
-#endif
-
-#ifdef CONFIG_CPU_COPY_V4WT
-# ifdef _USER
-#  define MULTI_USER 1
-# else
-#  define _USER v4wt
-# endif
-#endif
-
-#ifdef CONFIG_CPU_COPY_V4WB
-# ifdef _USER
-#  define MULTI_USER 1
-# else
-#  define _USER v4wb
-# endif
-#endif
-
-#ifdef CONFIG_CPU_COPY_FEROCEON
-# ifdef _USER
-#  define MULTI_USER 1
-# else
-#  define _USER feroceon
-# endif
-#endif
-
-#ifdef CONFIG_CPU_SA1100
-# ifdef _USER
-#  define MULTI_USER 1
-# else
-#  define _USER v4_mc
-# endif
-#endif
-
-#ifdef CONFIG_CPU_XSCALE
-# ifdef _USER
-#  define MULTI_USER 1
-# else
-#  define _USER xscale_mc
-# endif
-#endif
-
-#ifdef CONFIG_CPU_XSC3
-# ifdef _USER
-#  define MULTI_USER 1
-# else
-#  define _USER xsc3_mc
-# endif
-#endif
-
-#ifdef CONFIG_CPU_COPY_V6
-# define MULTI_USER 1
-#endif
-
-#if !defined(_USER) && !defined(MULTI_USER)
-#error Unknown user operations model
-#endif
-
-struct cpu_user_fns {
-	void (*cpu_clear_user_page)(void *p, unsigned long user);
-	void (*cpu_copy_user_page)(void *to, const void *from,
-				   unsigned long user);
-};
-
-#ifdef MULTI_USER
-extern struct cpu_user_fns cpu_user;
-
-#define __cpu_clear_user_page	cpu_user.cpu_clear_user_page
-#define __cpu_copy_user_page	cpu_user.cpu_copy_user_page
-
-#else
-
-#define __cpu_clear_user_page	__glue(_USER,_clear_user_page)
-#define __cpu_copy_user_page	__glue(_USER,_copy_user_page)
-
-extern void __cpu_clear_user_page(void *p, unsigned long user);
-extern void __cpu_copy_user_page(void *to, const void *from,
-				 unsigned long user);
-#endif
-
-#define clear_user_page(addr,vaddr,pg)	 __cpu_clear_user_page(addr, vaddr)
-#define copy_user_page(to,from,vaddr,pg) __cpu_copy_user_page(to, from, vaddr)
-
-#define clear_page(page)	memzero((void *)(page), PAGE_SIZE)
-extern void copy_page(void *to, const void *from);
-
-#undef STRICT_MM_TYPECHECKS
-
-#ifdef STRICT_MM_TYPECHECKS
-/*
- * These are used to make use of C type-checking..
- */
-typedef struct { unsigned long pte; } pte_t;
-typedef struct { unsigned long pmd; } pmd_t;
-typedef struct { unsigned long pgd[2]; } pgd_t;
-typedef struct { unsigned long pgprot; } pgprot_t;
-
-#define pte_val(x)      ((x).pte)
-#define pmd_val(x)      ((x).pmd)
-#define pgd_val(x)	((x).pgd[0])
-#define pgprot_val(x)   ((x).pgprot)
-
-#define __pte(x)        ((pte_t) { (x) } )
-#define __pmd(x)        ((pmd_t) { (x) } )
-#define __pgprot(x)     ((pgprot_t) { (x) } )
-
-#else
-/*
- * .. while these make it easier on the compiler
- */
-typedef unsigned long pte_t;
-typedef unsigned long pmd_t;
-typedef unsigned long pgd_t[2];
-typedef unsigned long pgprot_t;
-
-#define pte_val(x)      (x)
-#define pmd_val(x)      (x)
-#define pgd_val(x)	((x)[0])
-#define pgprot_val(x)   (x)
-
-#define __pte(x)        (x)
-#define __pmd(x)        (x)
-#define __pgprot(x)     (x)
-
-#endif /* STRICT_MM_TYPECHECKS */
-
-#endif /* CONFIG_MMU */
-
-typedef struct page *pgtable_t;
-
-#include <asm/memory.h>
-
-#endif /* !__ASSEMBLY__ */
-
-#define VM_DATA_DEFAULT_FLAGS	(VM_READ | VM_WRITE | VM_EXEC | \
-				 VM_MAYREAD | VM_MAYWRITE | VM_MAYEXEC)
-
-/*
- * With EABI on ARMv5 and above we must have 64-bit aligned slab pointers.
- */
-#if defined(CONFIG_AEABI) && (__LINUX_ARM_ARCH__ >= 5)
-#define ARCH_SLAB_MINALIGN 8
-#endif
-
-#include <asm-generic/page.h>
-
-#endif
diff --git a/include/asm-arm/param.h b/include/asm-arm/param.h
deleted file mode 100644
index 15806468ba72..000000000000
--- a/include/asm-arm/param.h
+++ /dev/null
@@ -1,31 +0,0 @@
-/*
- *  linux/include/asm-arm/param.h
- *
- *  Copyright (C) 1995-1999 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#ifndef __ASM_PARAM_H
-#define __ASM_PARAM_H
-
-#ifdef __KERNEL__
-# define HZ		CONFIG_HZ	/* Internal kernel timer frequency */
-# define USER_HZ	100		/* User interfaces are in "ticks" */
-# define CLOCKS_PER_SEC	(USER_HZ)	/* like times() */
-#else
-# define HZ		100
-#endif
-
-#define EXEC_PAGESIZE	4096
-
-#ifndef NOGROUP
-#define NOGROUP         (-1)
-#endif
-
-/* max length of hostname */
-#define MAXHOSTNAMELEN  64
-
-#endif
-
diff --git a/include/asm-arm/parport.h b/include/asm-arm/parport.h
deleted file mode 100644
index f2f90c76ddd1..000000000000
--- a/include/asm-arm/parport.h
+++ /dev/null
@@ -1,18 +0,0 @@
-/*
- *  linux/include/asm-arm/parport.h: ARM-specific parport initialisation
- *
- *  Copyright (C) 1999, 2000  Tim Waugh <tim@cyberelk.demon.co.uk>
- *
- * This file should only be included by drivers/parport/parport_pc.c.
- */
-
-#ifndef __ASMARM_PARPORT_H
-#define __ASMARM_PARPORT_H
-
-static int __devinit parport_pc_find_isa_ports (int autoirq, int autodma);
-static int __devinit parport_pc_find_nonpci_ports (int autoirq, int autodma)
-{
-	return parport_pc_find_isa_ports (autoirq, autodma);
-}
-
-#endif /* !(_ASMARM_PARPORT_H) */
diff --git a/include/asm-arm/pci.h b/include/asm-arm/pci.h
deleted file mode 100644
index 75feb1574a69..000000000000
--- a/include/asm-arm/pci.h
+++ /dev/null
@@ -1,83 +0,0 @@
-#ifndef ASMARM_PCI_H
-#define ASMARM_PCI_H
-
-#ifdef __KERNEL__
-#include <asm-generic/pci-dma-compat.h>
-
-#include <asm/hardware.h> /* for PCIBIOS_MIN_* */
-
-#define pcibios_scan_all_fns(a, b)	0
-
-#ifdef CONFIG_PCI_HOST_ITE8152
-/* ITE bridge requires setting latency timer to avoid early bus access
-   termination by PIC bus mater devices
-*/
-extern void pcibios_set_master(struct pci_dev *dev);
-#else
-static inline void pcibios_set_master(struct pci_dev *dev)
-{
-	/* No special bus mastering setup handling */
-}
-#endif
-
-static inline void pcibios_penalize_isa_irq(int irq, int active)
-{
-	/* We don't do dynamic PCI IRQ allocation */
-}
-
-/*
- * The PCI address space does equal the physical memory address space.
- * The networking and block device layers use this boolean for bounce
- * buffer decisions.
- */
-#define PCI_DMA_BUS_IS_PHYS     (0)
-
-/*
- * Whether pci_unmap_{single,page} is a nop depends upon the
- * configuration.
- */
-#define DECLARE_PCI_UNMAP_ADDR(ADDR_NAME)	dma_addr_t ADDR_NAME;
-#define DECLARE_PCI_UNMAP_LEN(LEN_NAME)		__u32 LEN_NAME;
-#define pci_unmap_addr(PTR, ADDR_NAME)		((PTR)->ADDR_NAME)
-#define pci_unmap_addr_set(PTR, ADDR_NAME, VAL)	(((PTR)->ADDR_NAME) = (VAL))
-#define pci_unmap_len(PTR, LEN_NAME)		((PTR)->LEN_NAME)
-#define pci_unmap_len_set(PTR, LEN_NAME, VAL)	(((PTR)->LEN_NAME) = (VAL))
-
-#ifdef CONFIG_PCI
-static inline void pci_dma_burst_advice(struct pci_dev *pdev,
-					enum pci_dma_burst_strategy *strat,
-					unsigned long *strategy_parameter)
-{
-	*strat = PCI_DMA_BURST_INFINITY;
-	*strategy_parameter = ~0UL;
-}
-#endif
-
-#define HAVE_PCI_MMAP
-extern int pci_mmap_page_range(struct pci_dev *dev, struct vm_area_struct *vma,
-                               enum pci_mmap_state mmap_state, int write_combine);
-
-extern void
-pcibios_resource_to_bus(struct pci_dev *dev, struct pci_bus_region *region,
-			 struct resource *res);
-
-extern void
-pcibios_bus_to_resource(struct pci_dev *dev, struct resource *res,
-			struct pci_bus_region *region);
-
-static inline struct resource *
-pcibios_select_root(struct pci_dev *pdev, struct resource *res)
-{
-	struct resource *root = NULL;
-
-	if (res->flags & IORESOURCE_IO)
-		root = &ioport_resource;
-	if (res->flags & IORESOURCE_MEM)
-		root = &iomem_resource;
-
-	return root;
-}
-
-#endif /* __KERNEL__ */
- 
-#endif
diff --git a/include/asm-arm/pgalloc.h b/include/asm-arm/pgalloc.h
deleted file mode 100644
index 163b0305dd76..000000000000
--- a/include/asm-arm/pgalloc.h
+++ /dev/null
@@ -1,136 +0,0 @@
-/*
- *  linux/include/asm-arm/pgalloc.h
- *
- *  Copyright (C) 2000-2001 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#ifndef _ASMARM_PGALLOC_H
-#define _ASMARM_PGALLOC_H
-
-#include <asm/domain.h>
-#include <asm/pgtable-hwdef.h>
-#include <asm/processor.h>
-#include <asm/cacheflush.h>
-#include <asm/tlbflush.h>
-
-#define check_pgt_cache()		do { } while (0)
-
-#ifdef CONFIG_MMU
-
-#define _PAGE_USER_TABLE	(PMD_TYPE_TABLE | PMD_BIT4 | PMD_DOMAIN(DOMAIN_USER))
-#define _PAGE_KERNEL_TABLE	(PMD_TYPE_TABLE | PMD_BIT4 | PMD_DOMAIN(DOMAIN_KERNEL))
-
-/*
- * Since we have only two-level page tables, these are trivial
- */
-#define pmd_alloc_one(mm,addr)		({ BUG(); ((pmd_t *)2); })
-#define pmd_free(mm, pmd)		do { } while (0)
-#define pgd_populate(mm,pmd,pte)	BUG()
-
-extern pgd_t *get_pgd_slow(struct mm_struct *mm);
-extern void free_pgd_slow(struct mm_struct *mm, pgd_t *pgd);
-
-#define pgd_alloc(mm)			get_pgd_slow(mm)
-#define pgd_free(mm, pgd)		free_pgd_slow(mm, pgd)
-
-/*
- * Allocate one PTE table.
- *
- * This actually allocates two hardware PTE tables, but we wrap this up
- * into one table thus:
- *
- *  +------------+
- *  |  h/w pt 0  |
- *  +------------+
- *  |  h/w pt 1  |
- *  +------------+
- *  | Linux pt 0 |
- *  +------------+
- *  | Linux pt 1 |
- *  +------------+
- */
-static inline pte_t *
-pte_alloc_one_kernel(struct mm_struct *mm, unsigned long addr)
-{
-	pte_t *pte;
-
-	pte = (pte_t *)__get_free_page(GFP_KERNEL|__GFP_REPEAT|__GFP_ZERO);
-	if (pte) {
-		clean_dcache_area(pte, sizeof(pte_t) * PTRS_PER_PTE);
-		pte += PTRS_PER_PTE;
-	}
-
-	return pte;
-}
-
-static inline pgtable_t
-pte_alloc_one(struct mm_struct *mm, unsigned long addr)
-{
-	struct page *pte;
-
-	pte = alloc_pages(GFP_KERNEL|__GFP_REPEAT|__GFP_ZERO, 0);
-	if (pte) {
-		void *page = page_address(pte);
-		clean_dcache_area(page, sizeof(pte_t) * PTRS_PER_PTE);
-		pgtable_page_ctor(pte);
-	}
-
-	return pte;
-}
-
-/*
- * Free one PTE table.
- */
-static inline void pte_free_kernel(struct mm_struct *mm, pte_t *pte)
-{
-	if (pte) {
-		pte -= PTRS_PER_PTE;
-		free_page((unsigned long)pte);
-	}
-}
-
-static inline void pte_free(struct mm_struct *mm, pgtable_t pte)
-{
-	pgtable_page_dtor(pte);
-	__free_page(pte);
-}
-
-static inline void __pmd_populate(pmd_t *pmdp, unsigned long pmdval)
-{
-	pmdp[0] = __pmd(pmdval);
-	pmdp[1] = __pmd(pmdval + 256 * sizeof(pte_t));
-	flush_pmd_entry(pmdp);
-}
-
-/*
- * Populate the pmdp entry with a pointer to the pte.  This pmd is part
- * of the mm address space.
- *
- * Ensure that we always set both PMD entries.
- */
-static inline void
-pmd_populate_kernel(struct mm_struct *mm, pmd_t *pmdp, pte_t *ptep)
-{
-	unsigned long pte_ptr = (unsigned long)ptep;
-
-	/*
-	 * The pmd must be loaded with the physical
-	 * address of the PTE table
-	 */
-	pte_ptr -= PTRS_PER_PTE * sizeof(void *);
-	__pmd_populate(pmdp, __pa(pte_ptr) | _PAGE_KERNEL_TABLE);
-}
-
-static inline void
-pmd_populate(struct mm_struct *mm, pmd_t *pmdp, pgtable_t ptep)
-{
-	__pmd_populate(pmdp, page_to_pfn(ptep) << PAGE_SHIFT | _PAGE_USER_TABLE);
-}
-#define pmd_pgtable(pmd) pmd_page(pmd)
-
-#endif /* CONFIG_MMU */
-
-#endif
diff --git a/include/asm-arm/pgtable.h b/include/asm-arm/pgtable.h
deleted file mode 100644
index 5571c13c3f3b..000000000000
--- a/include/asm-arm/pgtable.h
+++ /dev/null
@@ -1,401 +0,0 @@
-/*
- *  linux/include/asm-arm/pgtable.h
- *
- *  Copyright (C) 1995-2002 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#ifndef _ASMARM_PGTABLE_H
-#define _ASMARM_PGTABLE_H
-
-#include <asm-generic/4level-fixup.h>
-#include <asm/proc-fns.h>
-
-#ifndef CONFIG_MMU
-
-#include "pgtable-nommu.h"
-
-#else
-
-#include <asm/memory.h>
-#include <asm/arch/vmalloc.h>
-#include <asm/pgtable-hwdef.h>
-
-/*
- * Just any arbitrary offset to the start of the vmalloc VM area: the
- * current 8MB value just means that there will be a 8MB "hole" after the
- * physical memory until the kernel virtual memory starts.  That means that
- * any out-of-bounds memory accesses will hopefully be caught.
- * The vmalloc() routines leaves a hole of 4kB between each vmalloced
- * area for the same reason. ;)
- *
- * Note that platforms may override VMALLOC_START, but they must provide
- * VMALLOC_END.  VMALLOC_END defines the (exclusive) limit of this space,
- * which may not overlap IO space.
- */
-#ifndef VMALLOC_START
-#define VMALLOC_OFFSET		(8*1024*1024)
-#define VMALLOC_START		(((unsigned long)high_memory + VMALLOC_OFFSET) & ~(VMALLOC_OFFSET-1))
-#endif
-
-/*
- * Hardware-wise, we have a two level page table structure, where the first
- * level has 4096 entries, and the second level has 256 entries.  Each entry
- * is one 32-bit word.  Most of the bits in the second level entry are used
- * by hardware, and there aren't any "accessed" and "dirty" bits.
- *
- * Linux on the other hand has a three level page table structure, which can
- * be wrapped to fit a two level page table structure easily - using the PGD
- * and PTE only.  However, Linux also expects one "PTE" table per page, and
- * at least a "dirty" bit.
- *
- * Therefore, we tweak the implementation slightly - we tell Linux that we
- * have 2048 entries in the first level, each of which is 8 bytes (iow, two
- * hardware pointers to the second level.)  The second level contains two
- * hardware PTE tables arranged contiguously, followed by Linux versions
- * which contain the state information Linux needs.  We, therefore, end up
- * with 512 entries in the "PTE" level.
- *
- * This leads to the page tables having the following layout:
- *
- *    pgd             pte
- * |        |
- * +--------+ +0
- * |        |-----> +------------+ +0
- * +- - - - + +4    |  h/w pt 0  |
- * |        |-----> +------------+ +1024
- * +--------+ +8    |  h/w pt 1  |
- * |        |       +------------+ +2048
- * +- - - - +       | Linux pt 0 |
- * |        |       +------------+ +3072
- * +--------+       | Linux pt 1 |
- * |        |       +------------+ +4096
- *
- * See L_PTE_xxx below for definitions of bits in the "Linux pt", and
- * PTE_xxx for definitions of bits appearing in the "h/w pt".
- *
- * PMD_xxx definitions refer to bits in the first level page table.
- *
- * The "dirty" bit is emulated by only granting hardware write permission
- * iff the page is marked "writable" and "dirty" in the Linux PTE.  This
- * means that a write to a clean page will cause a permission fault, and
- * the Linux MM layer will mark the page dirty via handle_pte_fault().
- * For the hardware to notice the permission change, the TLB entry must
- * be flushed, and ptep_set_access_flags() does that for us.
- *
- * The "accessed" or "young" bit is emulated by a similar method; we only
- * allow accesses to the page if the "young" bit is set.  Accesses to the
- * page will cause a fault, and handle_pte_fault() will set the young bit
- * for us as long as the page is marked present in the corresponding Linux
- * PTE entry.  Again, ptep_set_access_flags() will ensure that the TLB is
- * up to date.
- *
- * However, when the "young" bit is cleared, we deny access to the page
- * by clearing the hardware PTE.  Currently Linux does not flush the TLB
- * for us in this case, which means the TLB will retain the transation
- * until either the TLB entry is evicted under pressure, or a context
- * switch which changes the user space mapping occurs.
- */
-#define PTRS_PER_PTE		512
-#define PTRS_PER_PMD		1
-#define PTRS_PER_PGD		2048
-
-/*
- * PMD_SHIFT determines the size of the area a second-level page table can map
- * PGDIR_SHIFT determines what a third-level page table entry can map
- */
-#define PMD_SHIFT		21
-#define PGDIR_SHIFT		21
-
-#define LIBRARY_TEXT_START	0x0c000000
-
-#ifndef __ASSEMBLY__
-extern void __pte_error(const char *file, int line, unsigned long val);
-extern void __pmd_error(const char *file, int line, unsigned long val);
-extern void __pgd_error(const char *file, int line, unsigned long val);
-
-#define pte_ERROR(pte)		__pte_error(__FILE__, __LINE__, pte_val(pte))
-#define pmd_ERROR(pmd)		__pmd_error(__FILE__, __LINE__, pmd_val(pmd))
-#define pgd_ERROR(pgd)		__pgd_error(__FILE__, __LINE__, pgd_val(pgd))
-#endif /* !__ASSEMBLY__ */
-
-#define PMD_SIZE		(1UL << PMD_SHIFT)
-#define PMD_MASK		(~(PMD_SIZE-1))
-#define PGDIR_SIZE		(1UL << PGDIR_SHIFT)
-#define PGDIR_MASK		(~(PGDIR_SIZE-1))
-
-/*
- * This is the lowest virtual address we can permit any user space
- * mapping to be mapped at.  This is particularly important for
- * non-high vector CPUs.
- */
-#define FIRST_USER_ADDRESS	PAGE_SIZE
-
-#define FIRST_USER_PGD_NR	1
-#define USER_PTRS_PER_PGD	((TASK_SIZE/PGDIR_SIZE) - FIRST_USER_PGD_NR)
-
-/*
- * section address mask and size definitions.
- */
-#define SECTION_SHIFT		20
-#define SECTION_SIZE		(1UL << SECTION_SHIFT)
-#define SECTION_MASK		(~(SECTION_SIZE-1))
-
-/*
- * ARMv6 supersection address mask and size definitions.
- */
-#define SUPERSECTION_SHIFT	24
-#define SUPERSECTION_SIZE	(1UL << SUPERSECTION_SHIFT)
-#define SUPERSECTION_MASK	(~(SUPERSECTION_SIZE-1))
-
-/*
- * "Linux" PTE definitions.
- *
- * We keep two sets of PTEs - the hardware and the linux version.
- * This allows greater flexibility in the way we map the Linux bits
- * onto the hardware tables, and allows us to have YOUNG and DIRTY
- * bits.
- *
- * The PTE table pointer refers to the hardware entries; the "Linux"
- * entries are stored 1024 bytes below.
- */
-#define L_PTE_PRESENT		(1 << 0)
-#define L_PTE_FILE		(1 << 1)	/* only when !PRESENT */
-#define L_PTE_YOUNG		(1 << 1)
-#define L_PTE_BUFFERABLE	(1 << 2)	/* matches PTE */
-#define L_PTE_CACHEABLE		(1 << 3)	/* matches PTE */
-#define L_PTE_USER		(1 << 4)
-#define L_PTE_WRITE		(1 << 5)
-#define L_PTE_EXEC		(1 << 6)
-#define L_PTE_DIRTY		(1 << 7)
-#define L_PTE_SHARED		(1 << 10)	/* shared(v6), coherent(xsc3) */
-
-#ifndef __ASSEMBLY__
-
-/*
- * The pgprot_* and protection_map entries will be fixed up in runtime
- * to include the cachable and bufferable bits based on memory policy,
- * as well as any architecture dependent bits like global/ASID and SMP
- * shared mapping bits.
- */
-#define _L_PTE_DEFAULT	L_PTE_PRESENT | L_PTE_YOUNG | L_PTE_CACHEABLE | L_PTE_BUFFERABLE
-#define _L_PTE_READ	L_PTE_USER | L_PTE_EXEC
-
-extern pgprot_t		pgprot_user;
-extern pgprot_t		pgprot_kernel;
-
-#define PAGE_NONE	pgprot_user
-#define PAGE_COPY	__pgprot(pgprot_val(pgprot_user) | _L_PTE_READ)
-#define PAGE_SHARED	__pgprot(pgprot_val(pgprot_user) | _L_PTE_READ | \
-				 L_PTE_WRITE)
-#define PAGE_READONLY	__pgprot(pgprot_val(pgprot_user) | _L_PTE_READ)
-#define PAGE_KERNEL	pgprot_kernel
-
-#define __PAGE_NONE	__pgprot(_L_PTE_DEFAULT)
-#define __PAGE_COPY	__pgprot(_L_PTE_DEFAULT | _L_PTE_READ)
-#define __PAGE_SHARED	__pgprot(_L_PTE_DEFAULT | _L_PTE_READ | L_PTE_WRITE)
-#define __PAGE_READONLY	__pgprot(_L_PTE_DEFAULT | _L_PTE_READ)
-
-#endif /* __ASSEMBLY__ */
-
-/*
- * The table below defines the page protection levels that we insert into our
- * Linux page table version.  These get translated into the best that the
- * architecture can perform.  Note that on most ARM hardware:
- *  1) We cannot do execute protection
- *  2) If we could do execute protection, then read is implied
- *  3) write implies read permissions
- */
-#define __P000  __PAGE_NONE
-#define __P001  __PAGE_READONLY
-#define __P010  __PAGE_COPY
-#define __P011  __PAGE_COPY
-#define __P100  __PAGE_READONLY
-#define __P101  __PAGE_READONLY
-#define __P110  __PAGE_COPY
-#define __P111  __PAGE_COPY
-
-#define __S000  __PAGE_NONE
-#define __S001  __PAGE_READONLY
-#define __S010  __PAGE_SHARED
-#define __S011  __PAGE_SHARED
-#define __S100  __PAGE_READONLY
-#define __S101  __PAGE_READONLY
-#define __S110  __PAGE_SHARED
-#define __S111  __PAGE_SHARED
-
-#ifndef __ASSEMBLY__
-/*
- * ZERO_PAGE is a global shared page that is always zero: used
- * for zero-mapped memory areas etc..
- */
-extern struct page *empty_zero_page;
-#define ZERO_PAGE(vaddr)	(empty_zero_page)
-
-#define pte_pfn(pte)		(pte_val(pte) >> PAGE_SHIFT)
-#define pfn_pte(pfn,prot)	(__pte(((pfn) << PAGE_SHIFT) | pgprot_val(prot)))
-
-#define pte_none(pte)		(!pte_val(pte))
-#define pte_clear(mm,addr,ptep)	set_pte_ext(ptep, __pte(0), 0)
-#define pte_page(pte)		(pfn_to_page(pte_pfn(pte)))
-#define pte_offset_kernel(dir,addr)	(pmd_page_vaddr(*(dir)) + __pte_index(addr))
-#define pte_offset_map(dir,addr)	(pmd_page_vaddr(*(dir)) + __pte_index(addr))
-#define pte_offset_map_nested(dir,addr)	(pmd_page_vaddr(*(dir)) + __pte_index(addr))
-#define pte_unmap(pte)		do { } while (0)
-#define pte_unmap_nested(pte)	do { } while (0)
-
-#define set_pte_ext(ptep,pte,ext) cpu_set_pte_ext(ptep,pte,ext)
-
-#define set_pte_at(mm,addr,ptep,pteval) do { \
-	set_pte_ext(ptep, pteval, (addr) >= TASK_SIZE ? 0 : PTE_EXT_NG); \
- } while (0)
-
-/*
- * The following only work if pte_present() is true.
- * Undefined behaviour if not..
- */
-#define pte_present(pte)	(pte_val(pte) & L_PTE_PRESENT)
-#define pte_write(pte)		(pte_val(pte) & L_PTE_WRITE)
-#define pte_dirty(pte)		(pte_val(pte) & L_PTE_DIRTY)
-#define pte_young(pte)		(pte_val(pte) & L_PTE_YOUNG)
-#define pte_special(pte)	(0)
-
-/*
- * The following only works if pte_present() is not true.
- */
-#define pte_file(pte)		(pte_val(pte) & L_PTE_FILE)
-#define pte_to_pgoff(x)		(pte_val(x) >> 2)
-#define pgoff_to_pte(x)		__pte(((x) << 2) | L_PTE_FILE)
-
-#define PTE_FILE_MAX_BITS	30
-
-#define PTE_BIT_FUNC(fn,op) \
-static inline pte_t pte_##fn(pte_t pte) { pte_val(pte) op; return pte; }
-
-PTE_BIT_FUNC(wrprotect, &= ~L_PTE_WRITE);
-PTE_BIT_FUNC(mkwrite,   |= L_PTE_WRITE);
-PTE_BIT_FUNC(mkclean,   &= ~L_PTE_DIRTY);
-PTE_BIT_FUNC(mkdirty,   |= L_PTE_DIRTY);
-PTE_BIT_FUNC(mkold,     &= ~L_PTE_YOUNG);
-PTE_BIT_FUNC(mkyoung,   |= L_PTE_YOUNG);
-
-static inline pte_t pte_mkspecial(pte_t pte) { return pte; }
-
-/*
- * Mark the prot value as uncacheable and unbufferable.
- */
-#define pgprot_noncached(prot)	__pgprot(pgprot_val(prot) & ~(L_PTE_CACHEABLE | L_PTE_BUFFERABLE))
-#define pgprot_writecombine(prot) __pgprot(pgprot_val(prot) & ~L_PTE_CACHEABLE)
-
-#define pmd_none(pmd)		(!pmd_val(pmd))
-#define pmd_present(pmd)	(pmd_val(pmd))
-#define pmd_bad(pmd)		(pmd_val(pmd) & 2)
-
-#define copy_pmd(pmdpd,pmdps)		\
-	do {				\
-		pmdpd[0] = pmdps[0];	\
-		pmdpd[1] = pmdps[1];	\
-		flush_pmd_entry(pmdpd);	\
-	} while (0)
-
-#define pmd_clear(pmdp)			\
-	do {				\
-		pmdp[0] = __pmd(0);	\
-		pmdp[1] = __pmd(0);	\
-		clean_pmd_entry(pmdp);	\
-	} while (0)
-
-static inline pte_t *pmd_page_vaddr(pmd_t pmd)
-{
-	unsigned long ptr;
-
-	ptr = pmd_val(pmd) & ~(PTRS_PER_PTE * sizeof(void *) - 1);
-	ptr += PTRS_PER_PTE * sizeof(void *);
-
-	return __va(ptr);
-}
-
-#define pmd_page(pmd) virt_to_page(__va(pmd_val(pmd)))
-
-/*
- * Permanent address of a page. We never have highmem, so this is trivial.
- */
-#define pages_to_mb(x)		((x) >> (20 - PAGE_SHIFT))
-
-/*
- * Conversion functions: convert a page and protection to a page entry,
- * and a page entry and page directory to the page they refer to.
- */
-#define mk_pte(page,prot)	pfn_pte(page_to_pfn(page),prot)
-
-/*
- * The "pgd_xxx()" functions here are trivial for a folded two-level
- * setup: the pgd is never bad, and a pmd always exists (as it's folded
- * into the pgd entry)
- */
-#define pgd_none(pgd)		(0)
-#define pgd_bad(pgd)		(0)
-#define pgd_present(pgd)	(1)
-#define pgd_clear(pgdp)		do { } while (0)
-#define set_pgd(pgd,pgdp)	do { } while (0)
-
-/* to find an entry in a page-table-directory */
-#define pgd_index(addr)		((addr) >> PGDIR_SHIFT)
-
-#define pgd_offset(mm, addr)	((mm)->pgd+pgd_index(addr))
-
-/* to find an entry in a kernel page-table-directory */
-#define pgd_offset_k(addr)	pgd_offset(&init_mm, addr)
-
-/* Find an entry in the second-level page table.. */
-#define pmd_offset(dir, addr)	((pmd_t *)(dir))
-
-/* Find an entry in the third-level page table.. */
-#define __pte_index(addr)	(((addr) >> PAGE_SHIFT) & (PTRS_PER_PTE - 1))
-
-static inline pte_t pte_modify(pte_t pte, pgprot_t newprot)
-{
-	const unsigned long mask = L_PTE_EXEC | L_PTE_WRITE | L_PTE_USER;
-	pte_val(pte) = (pte_val(pte) & ~mask) | (pgprot_val(newprot) & mask);
-	return pte;
-}
-
-extern pgd_t swapper_pg_dir[PTRS_PER_PGD];
-
-/* Encode and decode a swap entry.
- *
- * We support up to 32GB of swap on 4k machines
- */
-#define __swp_type(x)		(((x).val >> 2) & 0x7f)
-#define __swp_offset(x)		((x).val >> 9)
-#define __swp_entry(type,offset) ((swp_entry_t) { ((type) << 2) | ((offset) << 9) })
-#define __pte_to_swp_entry(pte)	((swp_entry_t) { pte_val(pte) })
-#define __swp_entry_to_pte(swp)	((pte_t) { (swp).val })
-
-/* Needs to be defined here and not in linux/mm.h, as it is arch dependent */
-/* FIXME: this is not correct */
-#define kern_addr_valid(addr)	(1)
-
-#include <asm-generic/pgtable.h>
-
-/*
- * We provide our own arch_get_unmapped_area to cope with VIPT caches.
- */
-#define HAVE_ARCH_UNMAPPED_AREA
-
-/*
- * remap a physical page `pfn' of size `size' with page protection `prot'
- * into virtual address `from'
- */
-#define io_remap_pfn_range(vma,from,pfn,size,prot) \
-		remap_pfn_range(vma, from, pfn, size, prot)
-
-#define pgtable_cache_init() do { } while (0)
-
-#endif /* !__ASSEMBLY__ */
-
-#endif /* CONFIG_MMU */
-
-#endif /* _ASMARM_PGTABLE_H */
diff --git a/include/asm-arm/plat-orion/ehci-orion.h b/include/asm-arm/plat-orion/ehci-orion.h
deleted file mode 100644
index 785705651e24..000000000000
--- a/include/asm-arm/plat-orion/ehci-orion.h
+++ /dev/null
@@ -1,19 +0,0 @@
-/*
- * include/asm-arm/plat-orion/ehci-orion.h
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __ASM_PLAT_ORION_EHCI_ORION_H
-#define __ASM_PLAT_ORION_EHCI_ORION_H
-
-#include <linux/mbus.h>
-
-struct orion_ehci_data {
-	struct mbus_dram_target_info	*dram;
-};
-
-
-#endif
diff --git a/include/asm-arm/plat-orion/irq.h b/include/asm-arm/plat-orion/irq.h
deleted file mode 100644
index 94aeed919d5b..000000000000
--- a/include/asm-arm/plat-orion/irq.h
+++ /dev/null
@@ -1,17 +0,0 @@
-/*
- * include/asm-arm/plat-orion/irq.h
- *
- * Marvell Orion SoC IRQ handling.
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __ASM_PLAT_ORION_IRQ_H
-#define __ASM_PLAT_ORION_IRQ_H
-
-void orion_irq_init(unsigned int irq_start, void __iomem *maskaddr);
-
-
-#endif
diff --git a/include/asm-arm/plat-orion/time.h b/include/asm-arm/plat-orion/time.h
deleted file mode 100644
index 0e85cc8f44d9..000000000000
--- a/include/asm-arm/plat-orion/time.h
+++ /dev/null
@@ -1,17 +0,0 @@
-/*
- * include/asm-arm/plat-orion/time.h
- *
- * Marvell Orion SoC time handling.
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __ASM_PLAT_ORION_TIME_H
-#define __ASM_PLAT_ORION_TIME_H
-
-void orion_time_init(unsigned int irq, unsigned int tclk);
-
-
-#endif
diff --git a/include/asm-arm/plat-s3c/iic.h b/include/asm-arm/plat-s3c/iic.h
index 71211c8b5384..5106acaa1d0e 100644
--- a/include/asm-arm/plat-s3c/iic.h
+++ b/include/asm-arm/plat-s3c/iic.h
@@ -1,4 +1,4 @@
-/* linux/include/asm-arm/arch-s3c2410/iic.h
+/* arch/arm/mach-s3c2410/include/mach/iic.h
  *
  * Copyright (c) 2004 Simtec Electronics
  *	Ben Dooks <ben@simtec.co.uk>
@@ -21,6 +21,7 @@
 */
 
 struct s3c2410_platform_i2c {
+	int		bus_num;	/* bus number to use */
 	unsigned int	flags;
 	unsigned int	slave_addr;	/* slave address for controller */
 	unsigned long	bus_freq;	/* standard bus frequency */
diff --git a/include/asm-arm/plat-s3c/nand.h b/include/asm-arm/plat-s3c/nand.h
index ad6bbe90616e..f4dcd14af059 100644
--- a/include/asm-arm/plat-s3c/nand.h
+++ b/include/asm-arm/plat-s3c/nand.h
@@ -1,4 +1,4 @@
-/* linux/include/asm-arm/arch-s3c2410/nand.h
+/* arch/arm/mach-s3c2410/include/mach/nand.h
  *
  * Copyright (c) 2004 Simtec Electronics
  *	Ben Dooks <ben@simtec.co.uk>
diff --git a/include/asm-arm/plat-s3c/regs-ac97.h b/include/asm-arm/plat-s3c/regs-ac97.h
index b004dee6bcaf..c3878f7acb83 100644
--- a/include/asm-arm/plat-s3c/regs-ac97.h
+++ b/include/asm-arm/plat-s3c/regs-ac97.h
@@ -1,4 +1,4 @@
-/* linux/include/asm-arm/arch-s3c2410/regs-ac97.h
+/* arch/arm/mach-s3c2410/include/mach/regs-ac97.h
  *
  * Copyright (c) 2006 Simtec Electronics <linux@simtec.co.uk>
  *		http://www.simtec.co.uk/products/SWLINUX/
diff --git a/include/asm-arm/plat-s3c/regs-adc.h b/include/asm-arm/plat-s3c/regs-adc.h
index c7f231963e76..4323cccc86cd 100644
--- a/include/asm-arm/plat-s3c/regs-adc.h
+++ b/include/asm-arm/plat-s3c/regs-adc.h
@@ -1,4 +1,4 @@
-/* linux/include/asm-arm/arch-s3c2410/regs-adc.h
+/* arch/arm/mach-s3c2410/include/mach/regs-adc.h
  *
  * Copyright (c) 2004 Shannon Holland <holland@loser.net>
  *
diff --git a/include/asm-arm/plat-s3c/regs-iic.h b/include/asm-arm/plat-s3c/regs-iic.h
index 2ae29522f253..2f7c17de8ac8 100644
--- a/include/asm-arm/plat-s3c/regs-iic.h
+++ b/include/asm-arm/plat-s3c/regs-iic.h
@@ -1,4 +1,4 @@
-/* linux/include/asm-arm/arch-s3c2410/regs-iic.h
+/* arch/arm/mach-s3c2410/include/mach/regs-iic.h
  *
  * Copyright (c) 2004 Simtec Electronics <linux@simtec.co.uk>
  *		http://www.simtec.co.uk/products/SWLINUX/
diff --git a/include/asm-arm/plat-s3c/regs-nand.h b/include/asm-arm/plat-s3c/regs-nand.h
index d742205ac172..b2caa4bca270 100644
--- a/include/asm-arm/plat-s3c/regs-nand.h
+++ b/include/asm-arm/plat-s3c/regs-nand.h
@@ -1,4 +1,4 @@
-/* linux/include/asm-arm/arch-s3c2410/regs-nand.h
+/* arch/arm/mach-s3c2410/include/mach/regs-nand.h
  *
  * Copyright (c) 2004,2005 Simtec Electronics <linux@simtec.co.uk>
  *		      http://www.simtec.co.uk/products/SWLINUX/
@@ -11,7 +11,7 @@
 */
 
 #ifndef __ASM_ARM_REGS_NAND
-#define __ASM_ARM_REGS_NAND "$Id: nand.h,v 1.3 2003/12/09 11:36:29 ben Exp $"
+#define __ASM_ARM_REGS_NAND
 
 
 #define S3C2410_NFREG(x) (x)
diff --git a/include/asm-arm/plat-s3c/regs-rtc.h b/include/asm-arm/plat-s3c/regs-rtc.h
index 93b03c49710a..d5837cf8e402 100644
--- a/include/asm-arm/plat-s3c/regs-rtc.h
+++ b/include/asm-arm/plat-s3c/regs-rtc.h
@@ -1,4 +1,4 @@
-/* linux/include/asm-arm/arch-s3c2410/regs-rtc.h
+/* arch/arm/mach-s3c2410/include/mach/regs-rtc.h
  *
  * Copyright (c) 2003 Simtec Electronics <linux@simtec.co.uk>
  *		      http://www.simtec.co.uk/products/SWLINUX/
diff --git a/include/asm-arm/plat-s3c/regs-serial.h b/include/asm-arm/plat-s3c/regs-serial.h
index 923e114db663..a0daa647b92c 100644
--- a/include/asm-arm/plat-s3c/regs-serial.h
+++ b/include/asm-arm/plat-s3c/regs-serial.h
@@ -1,4 +1,4 @@
-/* linux/include/asm-arm/arch-s3c2410/regs-serial.h
+/* arch/arm/mach-s3c2410/include/mach/regs-serial.h
  *
  *  From linux/include/asm-arm/hardware/serial_s3c2410.h
  *
diff --git a/include/asm-arm/plat-s3c/regs-timer.h b/include/asm-arm/plat-s3c/regs-timer.h
index b5bc692f3489..cc0eedd53e38 100644
--- a/include/asm-arm/plat-s3c/regs-timer.h
+++ b/include/asm-arm/plat-s3c/regs-timer.h
@@ -1,4 +1,4 @@
-/* linux/include/asm-arm/arch-s3c2410/regs-timer.h
+/* arch/arm/mach-s3c2410/include/mach/regs-timer.h
  *
  * Copyright (c) 2003 Simtec Electronics <linux@simtec.co.uk>
  *		      http://www.simtec.co.uk/products/SWLINUX/
@@ -12,7 +12,7 @@
 
 
 #ifndef __ASM_ARCH_REGS_TIMER_H
-#define __ASM_ARCH_REGS_TIMER_H "$Id: timer.h,v 1.4 2003/05/06 19:30:50 ben Exp $"
+#define __ASM_ARCH_REGS_TIMER_H
 
 #define S3C_TIMERREG(x) (S3C_VA_TIMER + (x))
 #define S3C_TIMERREG2(tmr,reg) S3C_TIMERREG((reg)+0x0c+((tmr)*0x0c))
diff --git a/include/asm-arm/plat-s3c/regs-watchdog.h b/include/asm-arm/plat-s3c/regs-watchdog.h
index 56c4193b7a46..4938492470f7 100644
--- a/include/asm-arm/plat-s3c/regs-watchdog.h
+++ b/include/asm-arm/plat-s3c/regs-watchdog.h
@@ -1,4 +1,4 @@
-/* linux/include/asm-arm/arch-s3c2410/regs-watchdog.h
+/* arch/arm/mach-s3c2410/include/mach/regs-watchdog.h
  *
  * Copyright (c) 2003 Simtec Electronics <linux@simtec.co.uk>
  *		      http://www.simtec.co.uk/products/SWLINUX/
@@ -12,7 +12,7 @@
 
 
 #ifndef __ASM_ARCH_REGS_WATCHDOG_H
-#define __ASM_ARCH_REGS_WATCHDOG_H "$Id: watchdog.h,v 1.2 2003/04/29 13:31:09 ben Exp $"
+#define __ASM_ARCH_REGS_WATCHDOG_H
 
 #define S3C_WDOGREG(x) ((x) + S3C_VA_WATCHDOG)
 
diff --git a/include/asm-arm/plat-s3c24xx/regs-iis.h b/include/asm-arm/plat-s3c24xx/regs-iis.h
index eaf77916a602..a6f1d5df13b4 100644
--- a/include/asm-arm/plat-s3c24xx/regs-iis.h
+++ b/include/asm-arm/plat-s3c24xx/regs-iis.h
@@ -1,4 +1,4 @@
-/* linux/include/asm-arm/arch-s3c2410/regs-iis.h
+/* arch/arm/mach-s3c2410/include/mach/regs-iis.h
  *
  * Copyright (c) 2003 Simtec Electronics <linux@simtec.co.uk>
  *		      http://www.simtec.co.uk/products/SWLINUX/
diff --git a/include/asm-arm/plat-s3c24xx/regs-spi.h b/include/asm-arm/plat-s3c24xx/regs-spi.h
index ea565b007d04..2b35479ee35c 100644
--- a/include/asm-arm/plat-s3c24xx/regs-spi.h
+++ b/include/asm-arm/plat-s3c24xx/regs-spi.h
@@ -1,4 +1,4 @@
-/* linux/include/asm-arm/arch-s3c2410/regs-spi.h
+/* arch/arm/mach-s3c2410/include/mach/regs-spi.h
  *
  * Copyright (c) 2004 Fetron GmbH
  *
diff --git a/include/asm-arm/plat-s3c24xx/regs-udc.h b/include/asm-arm/plat-s3c24xx/regs-udc.h
index e1e9805d2d9a..f0dd4a41b37b 100644
--- a/include/asm-arm/plat-s3c24xx/regs-udc.h
+++ b/include/asm-arm/plat-s3c24xx/regs-udc.h
@@ -1,4 +1,4 @@
-/* linux/include/asm-arm/arch-s3c2410/regs-udc.h
+/* arch/arm/mach-s3c2410/include/mach/regs-udc.h
  *
  * Copyright (C) 2004 Herbert Poetzl <herbert@13thfloor.at>
  *
diff --git a/include/asm-arm/plat-s3c24xx/s3c2410.h b/include/asm-arm/plat-s3c24xx/s3c2410.h
index 36de0b835873..3cd1ec677b3f 100644
--- a/include/asm-arm/plat-s3c24xx/s3c2410.h
+++ b/include/asm-arm/plat-s3c24xx/s3c2410.h
@@ -21,11 +21,11 @@ extern void s3c2410_init_uarts(struct s3c2410_uartcfg *cfg, int no);
 
 extern void s3c2410_init_clocks(int xtal);
 
-extern  int s3c2410_baseclk_add(void);
-
 #else
 #define s3c2410_init_clocks NULL
 #define s3c2410_init_uarts NULL
 #define s3c2410_map_io NULL
 #define s3c2410_init NULL
 #endif
+
+extern int s3c2410_baseclk_add(void);
diff --git a/include/asm-arm/plat-s3c24xx/udc.h b/include/asm-arm/plat-s3c24xx/udc.h
index b8aa6cb69b58..546bb4008f49 100644
--- a/include/asm-arm/plat-s3c24xx/udc.h
+++ b/include/asm-arm/plat-s3c24xx/udc.h
@@ -1,4 +1,4 @@
-/* linux/include/asm-arm/arch-s3c2410/udc.h
+/* arch/arm/mach-s3c2410/include/mach/udc.h
  *
  * Copyright (c) 2005 Arnaud Patard <arnaud.patard@rtp-net.org>
  *
diff --git a/include/asm-arm/posix_types.h b/include/asm-arm/posix_types.h
deleted file mode 100644
index c37379dadcb2..000000000000
--- a/include/asm-arm/posix_types.h
+++ /dev/null
@@ -1,77 +0,0 @@
-/*
- *  linux/include/asm-arm/posix_types.h
- *
- *  Copyright (C) 1996-1998 Russell King.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- *  Changelog:
- *   27-06-1996	RMK	Created
- */
-#ifndef __ARCH_ARM_POSIX_TYPES_H
-#define __ARCH_ARM_POSIX_TYPES_H
-
-/*
- * This file is generally used by user-level software, so you need to
- * be a little careful about namespace pollution etc.  Also, we cannot
- * assume GCC is being used.
- */
-
-typedef unsigned long		__kernel_ino_t;
-typedef unsigned short		__kernel_mode_t;
-typedef unsigned short		__kernel_nlink_t;
-typedef long			__kernel_off_t;
-typedef int			__kernel_pid_t;
-typedef unsigned short		__kernel_ipc_pid_t;
-typedef unsigned short		__kernel_uid_t;
-typedef unsigned short		__kernel_gid_t;
-typedef unsigned int		__kernel_size_t;
-typedef int			__kernel_ssize_t;
-typedef int			__kernel_ptrdiff_t;
-typedef long			__kernel_time_t;
-typedef long			__kernel_suseconds_t;
-typedef long			__kernel_clock_t;
-typedef int			__kernel_timer_t;
-typedef int			__kernel_clockid_t;
-typedef int			__kernel_daddr_t;
-typedef char *			__kernel_caddr_t;
-typedef unsigned short		__kernel_uid16_t;
-typedef unsigned short		__kernel_gid16_t;
-typedef unsigned int		__kernel_uid32_t;
-typedef unsigned int		__kernel_gid32_t;
-
-typedef unsigned short		__kernel_old_uid_t;
-typedef unsigned short		__kernel_old_gid_t;
-typedef unsigned short		__kernel_old_dev_t;
-
-#ifdef __GNUC__
-typedef long long		__kernel_loff_t;
-#endif
-
-typedef struct {
-	int	val[2];
-} __kernel_fsid_t;
-
-#if defined(__KERNEL__)
-
-#undef	__FD_SET
-#define __FD_SET(fd, fdsetp) \
-		(((fd_set *)(fdsetp))->fds_bits[(fd) >> 5] |= (1<<((fd) & 31)))
-
-#undef	__FD_CLR
-#define __FD_CLR(fd, fdsetp) \
-		(((fd_set *)(fdsetp))->fds_bits[(fd) >> 5] &= ~(1<<((fd) & 31)))
-
-#undef	__FD_ISSET
-#define __FD_ISSET(fd, fdsetp) \
-		((((fd_set *)(fdsetp))->fds_bits[(fd) >> 5] & (1<<((fd) & 31))) != 0)
-
-#undef	__FD_ZERO
-#define __FD_ZERO(fdsetp) \
-		(memset (fdsetp, 0, sizeof (*(fd_set *)(fdsetp))))
-
-#endif
-
-#endif
diff --git a/include/asm-arm/processor.h b/include/asm-arm/processor.h
deleted file mode 100644
index bd8029e8dc67..000000000000
--- a/include/asm-arm/processor.h
+++ /dev/null
@@ -1,131 +0,0 @@
-/*
- *  linux/include/asm-arm/processor.h
- *
- *  Copyright (C) 1995-1999 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ASM_ARM_PROCESSOR_H
-#define __ASM_ARM_PROCESSOR_H
-
-/*
- * Default implementation of macro that returns current
- * instruction pointer ("program counter").
- */
-#define current_text_addr() ({ __label__ _l; _l: &&_l;})
-
-#ifdef __KERNEL__
-
-#include <asm/ptrace.h>
-#include <asm/types.h>
-
-#ifdef __KERNEL__
-#define STACK_TOP	((current->personality == PER_LINUX_32BIT) ? \
-			 TASK_SIZE : TASK_SIZE_26)
-#define STACK_TOP_MAX	TASK_SIZE
-#endif
-
-union debug_insn {
-	u32	arm;
-	u16	thumb;
-};
-
-struct debug_entry {
-	u32			address;
-	union debug_insn	insn;
-};
-
-struct debug_info {
-	int			nsaved;
-	struct debug_entry	bp[2];
-};
-
-struct thread_struct {
-							/* fault info	  */
-	unsigned long		address;
-	unsigned long		trap_no;
-	unsigned long		error_code;
-							/* debugging	  */
-	struct debug_info	debug;
-};
-
-#define INIT_THREAD  {	}
-
-#ifdef CONFIG_MMU
-#define nommu_start_thread(regs) do { } while (0)
-#else
-#define nommu_start_thread(regs) regs->ARM_r10 = current->mm->start_data
-#endif
-
-#define start_thread(regs,pc,sp)					\
-({									\
-	unsigned long *stack = (unsigned long *)sp;			\
-	set_fs(USER_DS);						\
-	memzero(regs->uregs, sizeof(regs->uregs));			\
-	if (current->personality & ADDR_LIMIT_32BIT)			\
-		regs->ARM_cpsr = USR_MODE;				\
-	else								\
-		regs->ARM_cpsr = USR26_MODE;				\
-	if (elf_hwcap & HWCAP_THUMB && pc & 1)				\
-		regs->ARM_cpsr |= PSR_T_BIT;				\
-	regs->ARM_pc = pc & ~1;		/* pc */			\
-	regs->ARM_sp = sp;		/* sp */			\
-	regs->ARM_r2 = stack[2];	/* r2 (envp) */			\
-	regs->ARM_r1 = stack[1];	/* r1 (argv) */			\
-	regs->ARM_r0 = stack[0];	/* r0 (argc) */			\
-	nommu_start_thread(regs);					\
-})
-
-/* Forward declaration, a strange C thing */
-struct task_struct;
-
-/* Free all resources held by a thread. */
-extern void release_thread(struct task_struct *);
-
-/* Prepare to copy thread state - unlazy all lazy status */
-#define prepare_to_copy(tsk)	do { } while (0)
-
-unsigned long get_wchan(struct task_struct *p);
-
-#define cpu_relax()			barrier()
-
-/*
- * Create a new kernel thread
- */
-extern int kernel_thread(int (*fn)(void *), void *arg, unsigned long flags);
-
-#define task_pt_regs(p) \
-	((struct pt_regs *)(THREAD_START_SP + task_stack_page(p)) - 1)
-
-#define KSTK_EIP(tsk)	task_pt_regs(tsk)->ARM_pc
-#define KSTK_ESP(tsk)	task_pt_regs(tsk)->ARM_sp
-
-/*
- * Prefetching support - only ARMv5.
- */
-#if __LINUX_ARM_ARCH__ >= 5
-
-#define ARCH_HAS_PREFETCH
-static inline void prefetch(const void *ptr)
-{
-	__asm__ __volatile__(
-		"pld\t%0"
-		:
-		: "o" (*(char *)ptr)
-		: "cc");
-}
-
-#define ARCH_HAS_PREFETCHW
-#define prefetchw(ptr)	prefetch(ptr)
-
-#define ARCH_HAS_SPINLOCK_PREFETCH
-#define spin_lock_prefetch(x) do { } while (0)
-
-#endif
-
-#endif
-
-#endif /* __ASM_ARM_PROCESSOR_H */
diff --git a/include/asm-arm/ptrace.h b/include/asm-arm/ptrace.h
deleted file mode 100644
index 7aaa206cb54e..000000000000
--- a/include/asm-arm/ptrace.h
+++ /dev/null
@@ -1,164 +0,0 @@
-/*
- *  linux/include/asm-arm/ptrace.h
- *
- *  Copyright (C) 1996-2003 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#ifndef __ASM_ARM_PTRACE_H
-#define __ASM_ARM_PTRACE_H
-
-#include <asm/hwcap.h>
-
-#define PTRACE_GETREGS		12
-#define PTRACE_SETREGS		13
-#define PTRACE_GETFPREGS	14
-#define PTRACE_SETFPREGS	15
-/* PTRACE_ATTACH is 16 */
-/* PTRACE_DETACH is 17 */
-#define PTRACE_GETWMMXREGS	18
-#define PTRACE_SETWMMXREGS	19
-/* 20 is unused */
-#define PTRACE_OLDSETOPTIONS	21
-#define PTRACE_GET_THREAD_AREA	22
-#define PTRACE_SET_SYSCALL	23
-/* PTRACE_SYSCALL is 24 */
-#define PTRACE_GETCRUNCHREGS	25
-#define PTRACE_SETCRUNCHREGS	26
-
-/*
- * PSR bits
- */
-#define USR26_MODE	0x00000000
-#define FIQ26_MODE	0x00000001
-#define IRQ26_MODE	0x00000002
-#define SVC26_MODE	0x00000003
-#define USR_MODE	0x00000010
-#define FIQ_MODE	0x00000011
-#define IRQ_MODE	0x00000012
-#define SVC_MODE	0x00000013
-#define ABT_MODE	0x00000017
-#define UND_MODE	0x0000001b
-#define SYSTEM_MODE	0x0000001f
-#define MODE32_BIT	0x00000010
-#define MODE_MASK	0x0000001f
-#define PSR_T_BIT	0x00000020
-#define PSR_F_BIT	0x00000040
-#define PSR_I_BIT	0x00000080
-#define PSR_A_BIT	0x00000100
-#define PSR_J_BIT	0x01000000
-#define PSR_Q_BIT	0x08000000
-#define PSR_V_BIT	0x10000000
-#define PSR_C_BIT	0x20000000
-#define PSR_Z_BIT	0x40000000
-#define PSR_N_BIT	0x80000000
-#define PCMASK		0
-
-/*
- * Groups of PSR bits
- */
-#define PSR_f		0xff000000	/* Flags		*/
-#define PSR_s		0x00ff0000	/* Status		*/
-#define PSR_x		0x0000ff00	/* Extension		*/
-#define PSR_c		0x000000ff	/* Control		*/
-
-#ifndef __ASSEMBLY__
-
-/*
- * This struct defines the way the registers are stored on the
- * stack during a system call.  Note that sizeof(struct pt_regs)
- * has to be a multiple of 8.
- */
-struct pt_regs {
-	long uregs[18];
-};
-
-#define ARM_cpsr	uregs[16]
-#define ARM_pc		uregs[15]
-#define ARM_lr		uregs[14]
-#define ARM_sp		uregs[13]
-#define ARM_ip		uregs[12]
-#define ARM_fp		uregs[11]
-#define ARM_r10		uregs[10]
-#define ARM_r9		uregs[9]
-#define ARM_r8		uregs[8]
-#define ARM_r7		uregs[7]
-#define ARM_r6		uregs[6]
-#define ARM_r5		uregs[5]
-#define ARM_r4		uregs[4]
-#define ARM_r3		uregs[3]
-#define ARM_r2		uregs[2]
-#define ARM_r1		uregs[1]
-#define ARM_r0		uregs[0]
-#define ARM_ORIG_r0	uregs[17]
-
-#ifdef __KERNEL__
-
-#define user_mode(regs)	\
-	(((regs)->ARM_cpsr & 0xf) == 0)
-
-#ifdef CONFIG_ARM_THUMB
-#define thumb_mode(regs) \
-	(((regs)->ARM_cpsr & PSR_T_BIT))
-#else
-#define thumb_mode(regs) (0)
-#endif
-
-#define isa_mode(regs) \
-	((((regs)->ARM_cpsr & PSR_J_BIT) >> 23) | \
-	 (((regs)->ARM_cpsr & PSR_T_BIT) >> 5))
-
-#define processor_mode(regs) \
-	((regs)->ARM_cpsr & MODE_MASK)
-
-#define interrupts_enabled(regs) \
-	(!((regs)->ARM_cpsr & PSR_I_BIT))
-
-#define fast_interrupts_enabled(regs) \
-	(!((regs)->ARM_cpsr & PSR_F_BIT))
-
-/* Are the current registers suitable for user mode?
- * (used to maintain security in signal handlers)
- */
-static inline int valid_user_regs(struct pt_regs *regs)
-{
-	if (user_mode(regs) && (regs->ARM_cpsr & PSR_I_BIT) == 0) {
-		regs->ARM_cpsr &= ~(PSR_F_BIT | PSR_A_BIT);
-		return 1;
-	}
-
-	/*
-	 * Force CPSR to something logical...
-	 */
-	regs->ARM_cpsr &= PSR_f | PSR_s | (PSR_x & ~PSR_A_BIT) | PSR_T_BIT | MODE32_BIT;
-	if (!(elf_hwcap & HWCAP_26BIT))
-		regs->ARM_cpsr |= USR_MODE;
-
-	return 0;
-}
-
-#endif	/* __KERNEL__ */
-
-#define pc_pointer(v) \
-	((v) & ~PCMASK)
-
-#define instruction_pointer(regs) \
-	(pc_pointer((regs)->ARM_pc))
-
-#ifdef CONFIG_SMP
-extern unsigned long profile_pc(struct pt_regs *regs);
-#else
-#define profile_pc(regs) instruction_pointer(regs)
-#endif
-
-#ifdef __KERNEL__
-#define predicate(x)		((x) & 0xf0000000)
-#define PREDICATE_ALWAYS	0xe0000000
-#endif
-
-#endif /* __ASSEMBLY__ */
-
-#endif
-
diff --git a/include/asm-arm/serial.h b/include/asm-arm/serial.h
deleted file mode 100644
index 015b262dc145..000000000000
--- a/include/asm-arm/serial.h
+++ /dev/null
@@ -1,19 +0,0 @@
-/*
- *  linux/include/asm-arm/serial.h
- *
- *  Copyright (C) 1996 Russell King.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- *  Changelog:
- *   15-10-1996	RMK	Created
- */
-
-#ifndef __ASM_SERIAL_H
-#define __ASM_SERIAL_H
-
-#define BASE_BAUD	(1843200 / 16)
-
-#endif
diff --git a/include/asm-arm/smp.h b/include/asm-arm/smp.h
deleted file mode 100644
index 7fffa2404b8e..000000000000
--- a/include/asm-arm/smp.h
+++ /dev/null
@@ -1,147 +0,0 @@
-/*
- *  linux/include/asm-arm/smp.h
- *
- *  Copyright (C) 2004-2005 ARM Ltd.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#ifndef __ASM_ARM_SMP_H
-#define __ASM_ARM_SMP_H
-
-#include <linux/threads.h>
-#include <linux/cpumask.h>
-#include <linux/thread_info.h>
-
-#include <asm/arch/smp.h>
-
-#ifndef CONFIG_SMP
-# error "<asm-arm/smp.h> included in non-SMP build"
-#endif
-
-#define raw_smp_processor_id() (current_thread_info()->cpu)
-
-/*
- * at the moment, there's not a big penalty for changing CPUs
- * (the >big< penalty is running SMP in the first place)
- */
-#define PROC_CHANGE_PENALTY		15
-
-struct seq_file;
-
-/*
- * generate IPI list text
- */
-extern void show_ipi_list(struct seq_file *p);
-
-/*
- * Called from assembly code, this handles an IPI.
- */
-asmlinkage void do_IPI(struct pt_regs *regs);
-
-/*
- * Setup the SMP cpu_possible_map
- */
-extern void smp_init_cpus(void);
-
-/*
- * Move global data into per-processor storage.
- */
-extern void smp_store_cpu_info(unsigned int cpuid);
-
-/*
- * Raise an IPI cross call on CPUs in callmap.
- */
-extern void smp_cross_call(cpumask_t callmap);
-
-/*
- * Broadcast a timer interrupt to the other CPUs.
- */
-extern void smp_send_timer(void);
-
-/*
- * Broadcast a clock event to other CPUs.
- */
-extern void smp_timer_broadcast(cpumask_t mask);
-
-/*
- * Boot a secondary CPU, and assign it the specified idle task.
- * This also gives us the initial stack to use for this CPU.
- */
-extern int boot_secondary(unsigned int cpu, struct task_struct *);
-
-/*
- * Called from platform specific assembly code, this is the
- * secondary CPU entry point.
- */
-asmlinkage void secondary_start_kernel(void);
-
-/*
- * Perform platform specific initialisation of the specified CPU.
- */
-extern void platform_secondary_init(unsigned int cpu);
-
-/*
- * Initial data for bringing up a secondary CPU.
- */
-struct secondary_data {
-	unsigned long pgdir;
-	void *stack;
-};
-extern struct secondary_data secondary_data;
-
-extern int __cpu_disable(void);
-extern int mach_cpu_disable(unsigned int cpu);
-
-extern void __cpu_die(unsigned int cpu);
-extern void cpu_die(void);
-
-extern void platform_cpu_die(unsigned int cpu);
-extern int platform_cpu_kill(unsigned int cpu);
-extern void platform_cpu_enable(unsigned int cpu);
-
-extern void arch_send_call_function_single_ipi(int cpu);
-extern void arch_send_call_function_ipi(cpumask_t mask);
-
-/*
- * Local timer interrupt handling function (can be IPI'ed).
- */
-extern void local_timer_interrupt(void);
-
-#ifdef CONFIG_LOCAL_TIMERS
-
-/*
- * Stop a local timer interrupt.
- */
-extern void local_timer_stop(unsigned int cpu);
-
-/*
- * Platform provides this to acknowledge a local timer IRQ
- */
-extern int local_timer_ack(void);
-
-#else
-
-static inline void local_timer_stop(unsigned int cpu)
-{
-}
-
-#endif
-
-/*
- * Setup a local timer interrupt for a CPU.
- */
-extern void local_timer_setup(unsigned int cpu);
-
-/*
- * show local interrupt info
- */
-extern void show_local_irqs(struct seq_file *);
-
-/*
- * Called from assembly, this is the local timer IRQ handler
- */
-asmlinkage void do_local_timer(struct pt_regs *);
-
-#endif /* ifndef __ASM_ARM_SMP_H */
diff --git a/include/asm-arm/thread_info.h b/include/asm-arm/thread_info.h
deleted file mode 100644
index f5a664786311..000000000000
--- a/include/asm-arm/thread_info.h
+++ /dev/null
@@ -1,166 +0,0 @@
-/*
- *  linux/include/asm-arm/thread_info.h
- *
- *  Copyright (C) 2002 Russell King.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#ifndef __ASM_ARM_THREAD_INFO_H
-#define __ASM_ARM_THREAD_INFO_H
-
-#ifdef __KERNEL__
-
-#include <linux/compiler.h>
-#include <asm/fpstate.h>
-
-#define THREAD_SIZE_ORDER	1
-#define THREAD_SIZE		8192
-#define THREAD_START_SP		(THREAD_SIZE - 8)
-
-#ifndef __ASSEMBLY__
-
-struct task_struct;
-struct exec_domain;
-
-#include <asm/types.h>
-#include <asm/domain.h>
-
-typedef unsigned long mm_segment_t;
-
-struct cpu_context_save {
-	__u32	r4;
-	__u32	r5;
-	__u32	r6;
-	__u32	r7;
-	__u32	r8;
-	__u32	r9;
-	__u32	sl;
-	__u32	fp;
-	__u32	sp;
-	__u32	pc;
-	__u32	extra[2];		/* Xscale 'acc' register, etc */
-};
-
-/*
- * low level task data that entry.S needs immediate access to.
- * __switch_to() assumes cpu_context follows immediately after cpu_domain.
- */
-struct thread_info {
-	unsigned long		flags;		/* low level flags */
-	int			preempt_count;	/* 0 => preemptable, <0 => bug */
-	mm_segment_t		addr_limit;	/* address limit */
-	struct task_struct	*task;		/* main task structure */
-	struct exec_domain	*exec_domain;	/* execution domain */
-	__u32			cpu;		/* cpu */
-	__u32			cpu_domain;	/* cpu domain */
-	struct cpu_context_save	cpu_context;	/* cpu context */
-	__u32			syscall;	/* syscall number */
-	__u8			used_cp[16];	/* thread used copro */
-	unsigned long		tp_value;
-	struct crunch_state	crunchstate;
-	union fp_state		fpstate __attribute__((aligned(8)));
-	union vfp_state		vfpstate;
-#ifdef CONFIG_ARM_THUMBEE
-	unsigned long		thumbee_state;	/* ThumbEE Handler Base register */
-#endif
-	struct restart_block	restart_block;
-};
-
-#define INIT_THREAD_INFO(tsk)						\
-{									\
-	.task		= &tsk,						\
-	.exec_domain	= &default_exec_domain,				\
-	.flags		= 0,						\
-	.preempt_count	= 1,						\
-	.addr_limit	= KERNEL_DS,					\
-	.cpu_domain	= domain_val(DOMAIN_USER, DOMAIN_MANAGER) |	\
-			  domain_val(DOMAIN_KERNEL, DOMAIN_MANAGER) |	\
-			  domain_val(DOMAIN_IO, DOMAIN_CLIENT),		\
-	.restart_block	= {						\
-		.fn	= do_no_restart_syscall,			\
-	},								\
-}
-
-#define init_thread_info	(init_thread_union.thread_info)
-#define init_stack		(init_thread_union.stack)
-
-/*
- * how to get the thread information struct from C
- */
-static inline struct thread_info *current_thread_info(void) __attribute_const__;
-
-static inline struct thread_info *current_thread_info(void)
-{
-	register unsigned long sp asm ("sp");
-	return (struct thread_info *)(sp & ~(THREAD_SIZE - 1));
-}
-
-/* thread information allocation */
-#ifdef CONFIG_DEBUG_STACK_USAGE
-#define alloc_thread_info(tsk) \
-	((struct thread_info *)__get_free_pages(GFP_KERNEL | __GFP_ZERO, \
-		THREAD_SIZE_ORDER))
-#else
-#define alloc_thread_info(tsk) \
-	((struct thread_info *)__get_free_pages(GFP_KERNEL, THREAD_SIZE_ORDER))
-#endif
-
-#define free_thread_info(info) \
-	free_pages((unsigned long)info, THREAD_SIZE_ORDER);
-
-#define thread_saved_pc(tsk)	\
-	((unsigned long)(pc_pointer(task_thread_info(tsk)->cpu_context.pc)))
-#define thread_saved_fp(tsk)	\
-	((unsigned long)(task_thread_info(tsk)->cpu_context.fp))
-
-extern void crunch_task_disable(struct thread_info *);
-extern void crunch_task_copy(struct thread_info *, void *);
-extern void crunch_task_restore(struct thread_info *, void *);
-extern void crunch_task_release(struct thread_info *);
-
-extern void iwmmxt_task_disable(struct thread_info *);
-extern void iwmmxt_task_copy(struct thread_info *, void *);
-extern void iwmmxt_task_restore(struct thread_info *, void *);
-extern void iwmmxt_task_release(struct thread_info *);
-extern void iwmmxt_task_switch(struct thread_info *);
-
-#endif
-
-/*
- * We use bit 30 of the preempt_count to indicate that kernel
- * preemption is occurring.  See include/asm-arm/hardirq.h.
- */
-#define PREEMPT_ACTIVE	0x40000000
-
-/*
- * thread information flags:
- *  TIF_SYSCALL_TRACE	- syscall trace active
- *  TIF_SIGPENDING	- signal pending
- *  TIF_NEED_RESCHED	- rescheduling necessary
- *  TIF_USEDFPU		- FPU was used by this task this quantum (SMP)
- *  TIF_POLLING_NRFLAG	- true if poll_idle() is polling TIF_NEED_RESCHED
- */
-#define TIF_SIGPENDING		0
-#define TIF_NEED_RESCHED	1
-#define TIF_SYSCALL_TRACE	8
-#define TIF_POLLING_NRFLAG	16
-#define TIF_USING_IWMMXT	17
-#define TIF_MEMDIE		18
-#define TIF_FREEZE		19
-
-#define _TIF_SIGPENDING		(1 << TIF_SIGPENDING)
-#define _TIF_NEED_RESCHED	(1 << TIF_NEED_RESCHED)
-#define _TIF_SYSCALL_TRACE	(1 << TIF_SYSCALL_TRACE)
-#define _TIF_POLLING_NRFLAG	(1 << TIF_POLLING_NRFLAG)
-#define _TIF_USING_IWMMXT	(1 << TIF_USING_IWMMXT)
-#define _TIF_FREEZE		(1 << TIF_FREEZE)
-
-/*
- * Change these and you break ASM code in entry-common.S
- */
-#define _TIF_WORK_MASK		0x000000ff
-
-#endif /* __KERNEL__ */
-#endif /* __ASM_ARM_THREAD_INFO_H */
diff --git a/include/asm-arm/timex.h b/include/asm-arm/timex.h
deleted file mode 100644
index 7b8d4cb24be0..000000000000
--- a/include/asm-arm/timex.h
+++ /dev/null
@@ -1,24 +0,0 @@
-/*
- *  linux/include/asm-arm/timex.h
- *
- *  Copyright (C) 1997,1998 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- *  Architecture Specific TIME specifications
- */
-#ifndef _ASMARM_TIMEX_H
-#define _ASMARM_TIMEX_H
-
-#include <asm/arch/timex.h>
-
-typedef unsigned long cycles_t;
-
-static inline cycles_t get_cycles (void)
-{
-	return 0;
-}
-
-#endif
diff --git a/include/asm-arm/tlb.h b/include/asm-arm/tlb.h
deleted file mode 100644
index 36bd402a21cb..000000000000
--- a/include/asm-arm/tlb.h
+++ /dev/null
@@ -1,94 +0,0 @@
-/*
- *  linux/include/asm-arm/tlb.h
- *
- *  Copyright (C) 2002 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- *  Experimentation shows that on a StrongARM, it appears to be faster
- *  to use the "invalidate whole tlb" rather than "invalidate single
- *  tlb" for this.
- *
- *  This appears true for both the process fork+exit case, as well as
- *  the munmap-large-area case.
- */
-#ifndef __ASMARM_TLB_H
-#define __ASMARM_TLB_H
-
-#include <asm/cacheflush.h>
-#include <asm/tlbflush.h>
-
-#ifndef CONFIG_MMU
-
-#include <linux/pagemap.h>
-#include <asm-generic/tlb.h>
-
-#else /* !CONFIG_MMU */
-
-#include <asm/pgalloc.h>
-
-/*
- * TLB handling.  This allows us to remove pages from the page
- * tables, and efficiently handle the TLB issues.
- */
-struct mmu_gather {
-	struct mm_struct	*mm;
-	unsigned int		fullmm;
-};
-
-DECLARE_PER_CPU(struct mmu_gather, mmu_gathers);
-
-static inline struct mmu_gather *
-tlb_gather_mmu(struct mm_struct *mm, unsigned int full_mm_flush)
-{
-	struct mmu_gather *tlb = &get_cpu_var(mmu_gathers);
-
-	tlb->mm = mm;
-	tlb->fullmm = full_mm_flush;
-
-	return tlb;
-}
-
-static inline void
-tlb_finish_mmu(struct mmu_gather *tlb, unsigned long start, unsigned long end)
-{
-	if (tlb->fullmm)
-		flush_tlb_mm(tlb->mm);
-
-	/* keep the page table cache within bounds */
-	check_pgt_cache();
-
-	put_cpu_var(mmu_gathers);
-}
-
-#define tlb_remove_tlb_entry(tlb,ptep,address)	do { } while (0)
-
-/*
- * In the case of tlb vma handling, we can optimise these away in the
- * case where we're doing a full MM flush.  When we're doing a munmap,
- * the vmas are adjusted to only cover the region to be torn down.
- */
-static inline void
-tlb_start_vma(struct mmu_gather *tlb, struct vm_area_struct *vma)
-{
-	if (!tlb->fullmm)
-		flush_cache_range(vma, vma->vm_start, vma->vm_end);
-}
-
-static inline void
-tlb_end_vma(struct mmu_gather *tlb, struct vm_area_struct *vma)
-{
-	if (!tlb->fullmm)
-		flush_tlb_range(vma, vma->vm_start, vma->vm_end);
-}
-
-#define tlb_remove_page(tlb,page)	free_page_and_swap_cache(page)
-#define pte_free_tlb(tlb, ptep)		pte_free((tlb)->mm, ptep)
-#define pmd_free_tlb(tlb, pmdp)		pmd_free((tlb)->mm, pmdp)
-
-#define tlb_migrate_finish(mm)		do { } while (0)
-
-#endif /* CONFIG_MMU */
-#endif
diff --git a/include/asm-arm/tlbflush.h b/include/asm-arm/tlbflush.h
deleted file mode 100644
index 909656c747ef..000000000000
--- a/include/asm-arm/tlbflush.h
+++ /dev/null
@@ -1,500 +0,0 @@
-/*
- *  linux/include/asm-arm/tlbflush.h
- *
- *  Copyright (C) 1999-2003 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#ifndef _ASMARM_TLBFLUSH_H
-#define _ASMARM_TLBFLUSH_H
-
-
-#ifndef CONFIG_MMU
-
-#define tlb_flush(tlb)	((void) tlb)
-
-#else /* CONFIG_MMU */
-
-#include <asm/glue.h>
-
-#define TLB_V3_PAGE	(1 << 0)
-#define TLB_V4_U_PAGE	(1 << 1)
-#define TLB_V4_D_PAGE	(1 << 2)
-#define TLB_V4_I_PAGE	(1 << 3)
-#define TLB_V6_U_PAGE	(1 << 4)
-#define TLB_V6_D_PAGE	(1 << 5)
-#define TLB_V6_I_PAGE	(1 << 6)
-
-#define TLB_V3_FULL	(1 << 8)
-#define TLB_V4_U_FULL	(1 << 9)
-#define TLB_V4_D_FULL	(1 << 10)
-#define TLB_V4_I_FULL	(1 << 11)
-#define TLB_V6_U_FULL	(1 << 12)
-#define TLB_V6_D_FULL	(1 << 13)
-#define TLB_V6_I_FULL	(1 << 14)
-
-#define TLB_V6_U_ASID	(1 << 16)
-#define TLB_V6_D_ASID	(1 << 17)
-#define TLB_V6_I_ASID	(1 << 18)
-
-#define TLB_L2CLEAN_FR	(1 << 29)		/* Feroceon */
-#define TLB_DCLEAN	(1 << 30)
-#define TLB_WB		(1 << 31)
-
-/*
- *	MMU TLB Model
- *	=============
- *
- *	We have the following to choose from:
- *	  v3    - ARMv3
- *	  v4    - ARMv4 without write buffer
- *	  v4wb  - ARMv4 with write buffer without I TLB flush entry instruction
- *	  v4wbi - ARMv4 with write buffer with I TLB flush entry instruction
- *	  fr    - Feroceon (v4wbi with non-outer-cacheable page table walks)
- *	  v6wbi - ARMv6 with write buffer with I TLB flush entry instruction
- */
-#undef _TLB
-#undef MULTI_TLB
-
-#define v3_tlb_flags	(TLB_V3_FULL | TLB_V3_PAGE)
-
-#ifdef CONFIG_CPU_TLB_V3
-# define v3_possible_flags	v3_tlb_flags
-# define v3_always_flags	v3_tlb_flags
-# ifdef _TLB
-#  define MULTI_TLB 1
-# else
-#  define _TLB v3
-# endif
-#else
-# define v3_possible_flags	0
-# define v3_always_flags	(-1UL)
-#endif
-
-#define v4_tlb_flags	(TLB_V4_U_FULL | TLB_V4_U_PAGE)
-
-#ifdef CONFIG_CPU_TLB_V4WT
-# define v4_possible_flags	v4_tlb_flags
-# define v4_always_flags	v4_tlb_flags
-# ifdef _TLB
-#  define MULTI_TLB 1
-# else
-#  define _TLB v4
-# endif
-#else
-# define v4_possible_flags	0
-# define v4_always_flags	(-1UL)
-#endif
-
-#define v4wbi_tlb_flags	(TLB_WB | TLB_DCLEAN | \
-			 TLB_V4_I_FULL | TLB_V4_D_FULL | \
-			 TLB_V4_I_PAGE | TLB_V4_D_PAGE)
-
-#ifdef CONFIG_CPU_TLB_V4WBI
-# define v4wbi_possible_flags	v4wbi_tlb_flags
-# define v4wbi_always_flags	v4wbi_tlb_flags
-# ifdef _TLB
-#  define MULTI_TLB 1
-# else
-#  define _TLB v4wbi
-# endif
-#else
-# define v4wbi_possible_flags	0
-# define v4wbi_always_flags	(-1UL)
-#endif
-
-#define fr_tlb_flags	(TLB_WB | TLB_DCLEAN | TLB_L2CLEAN_FR | \
-			 TLB_V4_I_FULL | TLB_V4_D_FULL | \
-			 TLB_V4_I_PAGE | TLB_V4_D_PAGE)
-
-#ifdef CONFIG_CPU_TLB_FEROCEON
-# define fr_possible_flags	fr_tlb_flags
-# define fr_always_flags	fr_tlb_flags
-# ifdef _TLB
-#  define MULTI_TLB 1
-# else
-#  define _TLB v4wbi
-# endif
-#else
-# define fr_possible_flags	0
-# define fr_always_flags	(-1UL)
-#endif
-
-#define v4wb_tlb_flags	(TLB_WB | TLB_DCLEAN | \
-			 TLB_V4_I_FULL | TLB_V4_D_FULL | \
-			 TLB_V4_D_PAGE)
-
-#ifdef CONFIG_CPU_TLB_V4WB
-# define v4wb_possible_flags	v4wb_tlb_flags
-# define v4wb_always_flags	v4wb_tlb_flags
-# ifdef _TLB
-#  define MULTI_TLB 1
-# else
-#  define _TLB v4wb
-# endif
-#else
-# define v4wb_possible_flags	0
-# define v4wb_always_flags	(-1UL)
-#endif
-
-#define v6wbi_tlb_flags (TLB_WB | TLB_DCLEAN | \
-			 TLB_V6_I_FULL | TLB_V6_D_FULL | \
-			 TLB_V6_I_PAGE | TLB_V6_D_PAGE | \
-			 TLB_V6_I_ASID | TLB_V6_D_ASID)
-
-#ifdef CONFIG_CPU_TLB_V6
-# define v6wbi_possible_flags	v6wbi_tlb_flags
-# define v6wbi_always_flags	v6wbi_tlb_flags
-# ifdef _TLB
-#  define MULTI_TLB 1
-# else
-#  define _TLB v6wbi
-# endif
-#else
-# define v6wbi_possible_flags	0
-# define v6wbi_always_flags	(-1UL)
-#endif
-
-#ifdef CONFIG_CPU_TLB_V7
-# define v7wbi_possible_flags	v6wbi_tlb_flags
-# define v7wbi_always_flags	v6wbi_tlb_flags
-# ifdef _TLB
-#  define MULTI_TLB 1
-# else
-#  define _TLB v7wbi
-# endif
-#else
-# define v7wbi_possible_flags	0
-# define v7wbi_always_flags	(-1UL)
-#endif
-
-#ifndef _TLB
-#error Unknown TLB model
-#endif
-
-#ifndef __ASSEMBLY__
-
-#include <linux/sched.h>
-
-struct cpu_tlb_fns {
-	void (*flush_user_range)(unsigned long, unsigned long, struct vm_area_struct *);
-	void (*flush_kern_range)(unsigned long, unsigned long);
-	unsigned long tlb_flags;
-};
-
-/*
- * Select the calling method
- */
-#ifdef MULTI_TLB
-
-#define __cpu_flush_user_tlb_range	cpu_tlb.flush_user_range
-#define __cpu_flush_kern_tlb_range	cpu_tlb.flush_kern_range
-
-#else
-
-#define __cpu_flush_user_tlb_range	__glue(_TLB,_flush_user_tlb_range)
-#define __cpu_flush_kern_tlb_range	__glue(_TLB,_flush_kern_tlb_range)
-
-extern void __cpu_flush_user_tlb_range(unsigned long, unsigned long, struct vm_area_struct *);
-extern void __cpu_flush_kern_tlb_range(unsigned long, unsigned long);
-
-#endif
-
-extern struct cpu_tlb_fns cpu_tlb;
-
-#define __cpu_tlb_flags			cpu_tlb.tlb_flags
-
-/*
- *	TLB Management
- *	==============
- *
- *	The arch/arm/mm/tlb-*.S files implement these methods.
- *
- *	The TLB specific code is expected to perform whatever tests it
- *	needs to determine if it should invalidate the TLB for each
- *	call.  Start addresses are inclusive and end addresses are
- *	exclusive; it is safe to round these addresses down.
- *
- *	flush_tlb_all()
- *
- *		Invalidate the entire TLB.
- *
- *	flush_tlb_mm(mm)
- *
- *		Invalidate all TLB entries in a particular address
- *		space.
- *		- mm	- mm_struct describing address space
- *
- *	flush_tlb_range(mm,start,end)
- *
- *		Invalidate a range of TLB entries in the specified
- *		address space.
- *		- mm	- mm_struct describing address space
- *		- start - start address (may not be aligned)
- *		- end	- end address (exclusive, may not be aligned)
- *
- *	flush_tlb_page(vaddr,vma)
- *
- *		Invalidate the specified page in the specified address range.
- *		- vaddr - virtual address (may not be aligned)
- *		- vma	- vma_struct describing address range
- *
- *	flush_kern_tlb_page(kaddr)
- *
- *		Invalidate the TLB entry for the specified page.  The address
- *		will be in the kernels virtual memory space.  Current uses
- *		only require the D-TLB to be invalidated.
- *		- kaddr - Kernel virtual memory address
- */
-
-/*
- * We optimise the code below by:
- *  - building a set of TLB flags that might be set in __cpu_tlb_flags
- *  - building a set of TLB flags that will always be set in __cpu_tlb_flags
- *  - if we're going to need __cpu_tlb_flags, access it once and only once
- *
- * This allows us to build optimal assembly for the single-CPU type case,
- * and as close to optimal given the compiler constrants for multi-CPU
- * case.  We could do better for the multi-CPU case if the compiler
- * implemented the "%?" method, but this has been discontinued due to too
- * many people getting it wrong.
- */
-#define possible_tlb_flags	(v3_possible_flags | \
-				 v4_possible_flags | \
-				 v4wbi_possible_flags | \
-				 fr_possible_flags | \
-				 v4wb_possible_flags | \
-				 v6wbi_possible_flags)
-
-#define always_tlb_flags	(v3_always_flags & \
-				 v4_always_flags & \
-				 v4wbi_always_flags & \
-				 fr_always_flags & \
-				 v4wb_always_flags & \
-				 v6wbi_always_flags)
-
-#define tlb_flag(f)	((always_tlb_flags & (f)) || (__tlb_flag & possible_tlb_flags & (f)))
-
-static inline void local_flush_tlb_all(void)
-{
-	const int zero = 0;
-	const unsigned int __tlb_flag = __cpu_tlb_flags;
-
-	if (tlb_flag(TLB_WB))
-		dsb();
-
-	if (tlb_flag(TLB_V3_FULL))
-		asm("mcr p15, 0, %0, c6, c0, 0" : : "r" (zero) : "cc");
-	if (tlb_flag(TLB_V4_U_FULL | TLB_V6_U_FULL))
-		asm("mcr p15, 0, %0, c8, c7, 0" : : "r" (zero) : "cc");
-	if (tlb_flag(TLB_V4_D_FULL | TLB_V6_D_FULL))
-		asm("mcr p15, 0, %0, c8, c6, 0" : : "r" (zero) : "cc");
-	if (tlb_flag(TLB_V4_I_FULL | TLB_V6_I_FULL))
-		asm("mcr p15, 0, %0, c8, c5, 0" : : "r" (zero) : "cc");
-
-	if (tlb_flag(TLB_V6_I_FULL | TLB_V6_D_FULL |
-		     TLB_V6_I_PAGE | TLB_V6_D_PAGE |
-		     TLB_V6_I_ASID | TLB_V6_D_ASID)) {
-		/* flush the branch target cache */
-		asm("mcr p15, 0, %0, c7, c5, 6" : : "r" (zero) : "cc");
-		dsb();
-		isb();
-	}
-}
-
-static inline void local_flush_tlb_mm(struct mm_struct *mm)
-{
-	const int zero = 0;
-	const int asid = ASID(mm);
-	const unsigned int __tlb_flag = __cpu_tlb_flags;
-
-	if (tlb_flag(TLB_WB))
-		dsb();
-
-	if (cpu_isset(smp_processor_id(), mm->cpu_vm_mask)) {
-		if (tlb_flag(TLB_V3_FULL))
-			asm("mcr p15, 0, %0, c6, c0, 0" : : "r" (zero) : "cc");
-		if (tlb_flag(TLB_V4_U_FULL))
-			asm("mcr p15, 0, %0, c8, c7, 0" : : "r" (zero) : "cc");
-		if (tlb_flag(TLB_V4_D_FULL))
-			asm("mcr p15, 0, %0, c8, c6, 0" : : "r" (zero) : "cc");
-		if (tlb_flag(TLB_V4_I_FULL))
-			asm("mcr p15, 0, %0, c8, c5, 0" : : "r" (zero) : "cc");
-	}
-
-	if (tlb_flag(TLB_V6_U_ASID))
-		asm("mcr p15, 0, %0, c8, c7, 2" : : "r" (asid) : "cc");
-	if (tlb_flag(TLB_V6_D_ASID))
-		asm("mcr p15, 0, %0, c8, c6, 2" : : "r" (asid) : "cc");
-	if (tlb_flag(TLB_V6_I_ASID))
-		asm("mcr p15, 0, %0, c8, c5, 2" : : "r" (asid) : "cc");
-
-	if (tlb_flag(TLB_V6_I_FULL | TLB_V6_D_FULL |
-		     TLB_V6_I_PAGE | TLB_V6_D_PAGE |
-		     TLB_V6_I_ASID | TLB_V6_D_ASID)) {
-		/* flush the branch target cache */
-		asm("mcr p15, 0, %0, c7, c5, 6" : : "r" (zero) : "cc");
-		dsb();
-	}
-}
-
-static inline void
-local_flush_tlb_page(struct vm_area_struct *vma, unsigned long uaddr)
-{
-	const int zero = 0;
-	const unsigned int __tlb_flag = __cpu_tlb_flags;
-
-	uaddr = (uaddr & PAGE_MASK) | ASID(vma->vm_mm);
-
-	if (tlb_flag(TLB_WB))
-		dsb();
-
-	if (cpu_isset(smp_processor_id(), vma->vm_mm->cpu_vm_mask)) {
-		if (tlb_flag(TLB_V3_PAGE))
-			asm("mcr p15, 0, %0, c6, c0, 0" : : "r" (uaddr) : "cc");
-		if (tlb_flag(TLB_V4_U_PAGE))
-			asm("mcr p15, 0, %0, c8, c7, 1" : : "r" (uaddr) : "cc");
-		if (tlb_flag(TLB_V4_D_PAGE))
-			asm("mcr p15, 0, %0, c8, c6, 1" : : "r" (uaddr) : "cc");
-		if (tlb_flag(TLB_V4_I_PAGE))
-			asm("mcr p15, 0, %0, c8, c5, 1" : : "r" (uaddr) : "cc");
-		if (!tlb_flag(TLB_V4_I_PAGE) && tlb_flag(TLB_V4_I_FULL))
-			asm("mcr p15, 0, %0, c8, c5, 0" : : "r" (zero) : "cc");
-	}
-
-	if (tlb_flag(TLB_V6_U_PAGE))
-		asm("mcr p15, 0, %0, c8, c7, 1" : : "r" (uaddr) : "cc");
-	if (tlb_flag(TLB_V6_D_PAGE))
-		asm("mcr p15, 0, %0, c8, c6, 1" : : "r" (uaddr) : "cc");
-	if (tlb_flag(TLB_V6_I_PAGE))
-		asm("mcr p15, 0, %0, c8, c5, 1" : : "r" (uaddr) : "cc");
-
-	if (tlb_flag(TLB_V6_I_FULL | TLB_V6_D_FULL |
-		     TLB_V6_I_PAGE | TLB_V6_D_PAGE |
-		     TLB_V6_I_ASID | TLB_V6_D_ASID)) {
-		/* flush the branch target cache */
-		asm("mcr p15, 0, %0, c7, c5, 6" : : "r" (zero) : "cc");
-		dsb();
-	}
-}
-
-static inline void local_flush_tlb_kernel_page(unsigned long kaddr)
-{
-	const int zero = 0;
-	const unsigned int __tlb_flag = __cpu_tlb_flags;
-
-	kaddr &= PAGE_MASK;
-
-	if (tlb_flag(TLB_WB))
-		dsb();
-
-	if (tlb_flag(TLB_V3_PAGE))
-		asm("mcr p15, 0, %0, c6, c0, 0" : : "r" (kaddr) : "cc");
-	if (tlb_flag(TLB_V4_U_PAGE))
-		asm("mcr p15, 0, %0, c8, c7, 1" : : "r" (kaddr) : "cc");
-	if (tlb_flag(TLB_V4_D_PAGE))
-		asm("mcr p15, 0, %0, c8, c6, 1" : : "r" (kaddr) : "cc");
-	if (tlb_flag(TLB_V4_I_PAGE))
-		asm("mcr p15, 0, %0, c8, c5, 1" : : "r" (kaddr) : "cc");
-	if (!tlb_flag(TLB_V4_I_PAGE) && tlb_flag(TLB_V4_I_FULL))
-		asm("mcr p15, 0, %0, c8, c5, 0" : : "r" (zero) : "cc");
-
-	if (tlb_flag(TLB_V6_U_PAGE))
-		asm("mcr p15, 0, %0, c8, c7, 1" : : "r" (kaddr) : "cc");
-	if (tlb_flag(TLB_V6_D_PAGE))
-		asm("mcr p15, 0, %0, c8, c6, 1" : : "r" (kaddr) : "cc");
-	if (tlb_flag(TLB_V6_I_PAGE))
-		asm("mcr p15, 0, %0, c8, c5, 1" : : "r" (kaddr) : "cc");
-
-	if (tlb_flag(TLB_V6_I_FULL | TLB_V6_D_FULL |
-		     TLB_V6_I_PAGE | TLB_V6_D_PAGE |
-		     TLB_V6_I_ASID | TLB_V6_D_ASID)) {
-		/* flush the branch target cache */
-		asm("mcr p15, 0, %0, c7, c5, 6" : : "r" (zero) : "cc");
-		dsb();
-		isb();
-	}
-}
-
-/*
- *	flush_pmd_entry
- *
- *	Flush a PMD entry (word aligned, or double-word aligned) to
- *	RAM if the TLB for the CPU we are running on requires this.
- *	This is typically used when we are creating PMD entries.
- *
- *	clean_pmd_entry
- *
- *	Clean (but don't drain the write buffer) if the CPU requires
- *	these operations.  This is typically used when we are removing
- *	PMD entries.
- */
-static inline void flush_pmd_entry(pmd_t *pmd)
-{
-	const unsigned int __tlb_flag = __cpu_tlb_flags;
-
-	if (tlb_flag(TLB_DCLEAN))
-		asm("mcr	p15, 0, %0, c7, c10, 1	@ flush_pmd"
-			: : "r" (pmd) : "cc");
-
-	if (tlb_flag(TLB_L2CLEAN_FR))
-		asm("mcr	p15, 1, %0, c15, c9, 1  @ L2 flush_pmd"
-			: : "r" (pmd) : "cc");
-
-	if (tlb_flag(TLB_WB))
-		dsb();
-}
-
-static inline void clean_pmd_entry(pmd_t *pmd)
-{
-	const unsigned int __tlb_flag = __cpu_tlb_flags;
-
-	if (tlb_flag(TLB_DCLEAN))
-		asm("mcr	p15, 0, %0, c7, c10, 1	@ flush_pmd"
-			: : "r" (pmd) : "cc");
-
-	if (tlb_flag(TLB_L2CLEAN_FR))
-		asm("mcr	p15, 1, %0, c15, c9, 1  @ L2 flush_pmd"
-			: : "r" (pmd) : "cc");
-}
-
-#undef tlb_flag
-#undef always_tlb_flags
-#undef possible_tlb_flags
-
-/*
- * Convert calls to our calling convention.
- */
-#define local_flush_tlb_range(vma,start,end)	__cpu_flush_user_tlb_range(start,end,vma)
-#define local_flush_tlb_kernel_range(s,e)	__cpu_flush_kern_tlb_range(s,e)
-
-#ifndef CONFIG_SMP
-#define flush_tlb_all		local_flush_tlb_all
-#define flush_tlb_mm		local_flush_tlb_mm
-#define flush_tlb_page		local_flush_tlb_page
-#define flush_tlb_kernel_page	local_flush_tlb_kernel_page
-#define flush_tlb_range		local_flush_tlb_range
-#define flush_tlb_kernel_range	local_flush_tlb_kernel_range
-#else
-extern void flush_tlb_all(void);
-extern void flush_tlb_mm(struct mm_struct *mm);
-extern void flush_tlb_page(struct vm_area_struct *vma, unsigned long uaddr);
-extern void flush_tlb_kernel_page(unsigned long kaddr);
-extern void flush_tlb_range(struct vm_area_struct *vma, unsigned long start, unsigned long end);
-extern void flush_tlb_kernel_range(unsigned long start, unsigned long end);
-#endif
-
-/*
- * if PG_dcache_dirty is set for the page, we need to ensure that any
- * cache entries for the kernels virtual memory range are written
- * back to the page.
- */
-extern void update_mmu_cache(struct vm_area_struct *vma, unsigned long addr, pte_t pte);
-
-#endif
-
-#endif /* CONFIG_MMU */
-
-#endif
diff --git a/include/asm-arm/uaccess.h b/include/asm-arm/uaccess.h
deleted file mode 100644
index 4c1a3fa9f259..000000000000
--- a/include/asm-arm/uaccess.h
+++ /dev/null
@@ -1,444 +0,0 @@
-/*
- *  linux/include/asm-arm/uaccess.h
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#ifndef _ASMARM_UACCESS_H
-#define _ASMARM_UACCESS_H
-
-/*
- * User space memory access functions
- */
-#include <linux/sched.h>
-#include <asm/errno.h>
-#include <asm/memory.h>
-#include <asm/domain.h>
-#include <asm/system.h>
-
-#define VERIFY_READ 0
-#define VERIFY_WRITE 1
-
-/*
- * The exception table consists of pairs of addresses: the first is the
- * address of an instruction that is allowed to fault, and the second is
- * the address at which the program should continue.  No registers are
- * modified, so it is entirely up to the continuation code to figure out
- * what to do.
- *
- * All the routines below use bits of fixup code that are out of line
- * with the main instruction path.  This means when everything is well,
- * we don't even have to jump over them.  Further, they do not intrude
- * on our cache or tlb entries.
- */
-
-struct exception_table_entry
-{
-	unsigned long insn, fixup;
-};
-
-extern int fixup_exception(struct pt_regs *regs);
-
-/*
- * These two are intentionally not defined anywhere - if the kernel
- * code generates any references to them, that's a bug.
- */
-extern int __get_user_bad(void);
-extern int __put_user_bad(void);
-
-/*
- * Note that this is actually 0x1,0000,0000
- */
-#define KERNEL_DS	0x00000000
-#define get_ds()	(KERNEL_DS)
-
-#ifdef CONFIG_MMU
-
-#define USER_DS		TASK_SIZE
-#define get_fs()	(current_thread_info()->addr_limit)
-
-static inline void set_fs(mm_segment_t fs)
-{
-	current_thread_info()->addr_limit = fs;
-	modify_domain(DOMAIN_KERNEL, fs ? DOMAIN_CLIENT : DOMAIN_MANAGER);
-}
-
-#define segment_eq(a,b)	((a) == (b))
-
-#define __addr_ok(addr) ({ \
-	unsigned long flag; \
-	__asm__("cmp %2, %0; movlo %0, #0" \
-		: "=&r" (flag) \
-		: "0" (current_thread_info()->addr_limit), "r" (addr) \
-		: "cc"); \
-	(flag == 0); })
-
-/* We use 33-bit arithmetic here... */
-#define __range_ok(addr,size) ({ \
-	unsigned long flag, roksum; \
-	__chk_user_ptr(addr);	\
-	__asm__("adds %1, %2, %3; sbcccs %1, %1, %0; movcc %0, #0" \
-		: "=&r" (flag), "=&r" (roksum) \
-		: "r" (addr), "Ir" (size), "0" (current_thread_info()->addr_limit) \
-		: "cc"); \
-	flag; })
-
-/*
- * Single-value transfer routines.  They automatically use the right
- * size if we just have the right pointer type.  Note that the functions
- * which read from user space (*get_*) need to take care not to leak
- * kernel data even if the calling code is buggy and fails to check
- * the return value.  This means zeroing out the destination variable
- * or buffer on error.  Normally this is done out of line by the
- * fixup code, but there are a few places where it intrudes on the
- * main code path.  When we only write to user space, there is no
- * problem.
- */
-extern int __get_user_1(void *);
-extern int __get_user_2(void *);
-extern int __get_user_4(void *);
-
-#define __get_user_x(__r2,__p,__e,__s,__i...)				\
-	   __asm__ __volatile__ (					\
-		__asmeq("%0", "r0") __asmeq("%1", "r2")			\
-		"bl	__get_user_" #__s				\
-		: "=&r" (__e), "=r" (__r2)				\
-		: "0" (__p)						\
-		: __i, "cc")
-
-#define get_user(x,p)							\
-	({								\
-		register const typeof(*(p)) __user *__p asm("r0") = (p);\
-		register unsigned long __r2 asm("r2");			\
-		register int __e asm("r0");				\
-		switch (sizeof(*(__p))) {				\
-		case 1:							\
-			__get_user_x(__r2, __p, __e, 1, "lr");		\
-	       		break;						\
-		case 2:							\
-			__get_user_x(__r2, __p, __e, 2, "r3", "lr");	\
-			break;						\
-		case 4:							\
-	       		__get_user_x(__r2, __p, __e, 4, "lr");		\
-			break;						\
-		default: __e = __get_user_bad(); break;			\
-		}							\
-		x = (typeof(*(p))) __r2;				\
-		__e;							\
-	})
-
-extern int __put_user_1(void *, unsigned int);
-extern int __put_user_2(void *, unsigned int);
-extern int __put_user_4(void *, unsigned int);
-extern int __put_user_8(void *, unsigned long long);
-
-#define __put_user_x(__r2,__p,__e,__s)					\
-	   __asm__ __volatile__ (					\
-		__asmeq("%0", "r0") __asmeq("%2", "r2")			\
-		"bl	__put_user_" #__s				\
-		: "=&r" (__e)						\
-		: "0" (__p), "r" (__r2)					\
-		: "ip", "lr", "cc")
-
-#define put_user(x,p)							\
-	({								\
-		register const typeof(*(p)) __r2 asm("r2") = (x);	\
-		register const typeof(*(p)) __user *__p asm("r0") = (p);\
-		register int __e asm("r0");				\
-		switch (sizeof(*(__p))) {				\
-		case 1:							\
-			__put_user_x(__r2, __p, __e, 1);		\
-			break;						\
-		case 2:							\
-			__put_user_x(__r2, __p, __e, 2);		\
-			break;						\
-		case 4:							\
-			__put_user_x(__r2, __p, __e, 4);		\
-			break;						\
-		case 8:							\
-			__put_user_x(__r2, __p, __e, 8);		\
-			break;						\
-		default: __e = __put_user_bad(); break;			\
-		}							\
-		__e;							\
-	})
-
-#else /* CONFIG_MMU */
-
-/*
- * uClinux has only one addr space, so has simplified address limits.
- */
-#define USER_DS			KERNEL_DS
-
-#define segment_eq(a,b)		(1)
-#define __addr_ok(addr)		(1)
-#define __range_ok(addr,size)	(0)
-#define get_fs()		(KERNEL_DS)
-
-static inline void set_fs(mm_segment_t fs)
-{
-}
-
-#define get_user(x,p)	__get_user(x,p)
-#define put_user(x,p)	__put_user(x,p)
-
-#endif /* CONFIG_MMU */
-
-#define access_ok(type,addr,size)	(__range_ok(addr,size) == 0)
-
-/*
- * The "__xxx" versions of the user access functions do not verify the
- * address space - it must have been done previously with a separate
- * "access_ok()" call.
- *
- * The "xxx_error" versions set the third argument to EFAULT if an
- * error occurs, and leave it unchanged on success.  Note that these
- * versions are void (ie, don't return a value as such).
- */
-#define __get_user(x,ptr)						\
-({									\
-	long __gu_err = 0;						\
-	__get_user_err((x),(ptr),__gu_err);				\
-	__gu_err;							\
-})
-
-#define __get_user_error(x,ptr,err)					\
-({									\
-	__get_user_err((x),(ptr),err);					\
-	(void) 0;							\
-})
-
-#define __get_user_err(x,ptr,err)					\
-do {									\
-	unsigned long __gu_addr = (unsigned long)(ptr);			\
-	unsigned long __gu_val;						\
-	__chk_user_ptr(ptr);						\
-	switch (sizeof(*(ptr))) {					\
-	case 1:	__get_user_asm_byte(__gu_val,__gu_addr,err);	break;	\
-	case 2:	__get_user_asm_half(__gu_val,__gu_addr,err);	break;	\
-	case 4:	__get_user_asm_word(__gu_val,__gu_addr,err);	break;	\
-	default: (__gu_val) = __get_user_bad();				\
-	}								\
-	(x) = (__typeof__(*(ptr)))__gu_val;				\
-} while (0)
-
-#define __get_user_asm_byte(x,addr,err)				\
-	__asm__ __volatile__(					\
-	"1:	ldrbt	%1,[%2],#0\n"				\
-	"2:\n"							\
-	"	.section .fixup,\"ax\"\n"			\
-	"	.align	2\n"					\
-	"3:	mov	%0, %3\n"				\
-	"	mov	%1, #0\n"				\
-	"	b	2b\n"					\
-	"	.previous\n"					\
-	"	.section __ex_table,\"a\"\n"			\
-	"	.align	3\n"					\
-	"	.long	1b, 3b\n"				\
-	"	.previous"					\
-	: "+r" (err), "=&r" (x)					\
-	: "r" (addr), "i" (-EFAULT)				\
-	: "cc")
-
-#ifndef __ARMEB__
-#define __get_user_asm_half(x,__gu_addr,err)			\
-({								\
-	unsigned long __b1, __b2;				\
-	__get_user_asm_byte(__b1, __gu_addr, err);		\
-	__get_user_asm_byte(__b2, __gu_addr + 1, err);		\
-	(x) = __b1 | (__b2 << 8);				\
-})
-#else
-#define __get_user_asm_half(x,__gu_addr,err)			\
-({								\
-	unsigned long __b1, __b2;				\
-	__get_user_asm_byte(__b1, __gu_addr, err);		\
-	__get_user_asm_byte(__b2, __gu_addr + 1, err);		\
-	(x) = (__b1 << 8) | __b2;				\
-})
-#endif
-
-#define __get_user_asm_word(x,addr,err)				\
-	__asm__ __volatile__(					\
-	"1:	ldrt	%1,[%2],#0\n"				\
-	"2:\n"							\
-	"	.section .fixup,\"ax\"\n"			\
-	"	.align	2\n"					\
-	"3:	mov	%0, %3\n"				\
-	"	mov	%1, #0\n"				\
-	"	b	2b\n"					\
-	"	.previous\n"					\
-	"	.section __ex_table,\"a\"\n"			\
-	"	.align	3\n"					\
-	"	.long	1b, 3b\n"				\
-	"	.previous"					\
-	: "+r" (err), "=&r" (x)					\
-	: "r" (addr), "i" (-EFAULT)				\
-	: "cc")
-
-#define __put_user(x,ptr)						\
-({									\
-	long __pu_err = 0;						\
-	__put_user_err((x),(ptr),__pu_err);				\
-	__pu_err;							\
-})
-
-#define __put_user_error(x,ptr,err)					\
-({									\
-	__put_user_err((x),(ptr),err);					\
-	(void) 0;							\
-})
-
-#define __put_user_err(x,ptr,err)					\
-do {									\
-	unsigned long __pu_addr = (unsigned long)(ptr);			\
-	__typeof__(*(ptr)) __pu_val = (x);				\
-	__chk_user_ptr(ptr);						\
-	switch (sizeof(*(ptr))) {					\
-	case 1: __put_user_asm_byte(__pu_val,__pu_addr,err);	break;	\
-	case 2: __put_user_asm_half(__pu_val,__pu_addr,err);	break;	\
-	case 4: __put_user_asm_word(__pu_val,__pu_addr,err);	break;	\
-	case 8:	__put_user_asm_dword(__pu_val,__pu_addr,err);	break;	\
-	default: __put_user_bad();					\
-	}								\
-} while (0)
-
-#define __put_user_asm_byte(x,__pu_addr,err)			\
-	__asm__ __volatile__(					\
-	"1:	strbt	%1,[%2],#0\n"				\
-	"2:\n"							\
-	"	.section .fixup,\"ax\"\n"			\
-	"	.align	2\n"					\
-	"3:	mov	%0, %3\n"				\
-	"	b	2b\n"					\
-	"	.previous\n"					\
-	"	.section __ex_table,\"a\"\n"			\
-	"	.align	3\n"					\
-	"	.long	1b, 3b\n"				\
-	"	.previous"					\
-	: "+r" (err)						\
-	: "r" (x), "r" (__pu_addr), "i" (-EFAULT)		\
-	: "cc")
-
-#ifndef __ARMEB__
-#define __put_user_asm_half(x,__pu_addr,err)			\
-({								\
-	unsigned long __temp = (unsigned long)(x);		\
-	__put_user_asm_byte(__temp, __pu_addr, err);		\
-	__put_user_asm_byte(__temp >> 8, __pu_addr + 1, err);	\
-})
-#else
-#define __put_user_asm_half(x,__pu_addr,err)			\
-({								\
-	unsigned long __temp = (unsigned long)(x);		\
-	__put_user_asm_byte(__temp >> 8, __pu_addr, err);	\
-	__put_user_asm_byte(__temp, __pu_addr + 1, err);	\
-})
-#endif
-
-#define __put_user_asm_word(x,__pu_addr,err)			\
-	__asm__ __volatile__(					\
-	"1:	strt	%1,[%2],#0\n"				\
-	"2:\n"							\
-	"	.section .fixup,\"ax\"\n"			\
-	"	.align	2\n"					\
-	"3:	mov	%0, %3\n"				\
-	"	b	2b\n"					\
-	"	.previous\n"					\
-	"	.section __ex_table,\"a\"\n"			\
-	"	.align	3\n"					\
-	"	.long	1b, 3b\n"				\
-	"	.previous"					\
-	: "+r" (err)						\
-	: "r" (x), "r" (__pu_addr), "i" (-EFAULT)		\
-	: "cc")
-
-#ifndef __ARMEB__
-#define	__reg_oper0	"%R2"
-#define	__reg_oper1	"%Q2"
-#else
-#define	__reg_oper0	"%Q2"
-#define	__reg_oper1	"%R2"
-#endif
-
-#define __put_user_asm_dword(x,__pu_addr,err)			\
-	__asm__ __volatile__(					\
-	"1:	strt	" __reg_oper1 ", [%1], #4\n"		\
-	"2:	strt	" __reg_oper0 ", [%1], #0\n"		\
-	"3:\n"							\
-	"	.section .fixup,\"ax\"\n"			\
-	"	.align	2\n"					\
-	"4:	mov	%0, %3\n"				\
-	"	b	3b\n"					\
-	"	.previous\n"					\
-	"	.section __ex_table,\"a\"\n"			\
-	"	.align	3\n"					\
-	"	.long	1b, 4b\n"				\
-	"	.long	2b, 4b\n"				\
-	"	.previous"					\
-	: "+r" (err), "+r" (__pu_addr)				\
-	: "r" (x), "i" (-EFAULT)				\
-	: "cc")
-
-
-#ifdef CONFIG_MMU
-extern unsigned long __must_check __copy_from_user(void *to, const void __user *from, unsigned long n);
-extern unsigned long __must_check __copy_to_user(void __user *to, const void *from, unsigned long n);
-extern unsigned long __must_check __clear_user(void __user *addr, unsigned long n);
-#else
-#define __copy_from_user(to,from,n)	(memcpy(to, (void __force *)from, n), 0)
-#define __copy_to_user(to,from,n)	(memcpy((void __force *)to, from, n), 0)
-#define __clear_user(addr,n)		(memset((void __force *)addr, 0, n), 0)
-#endif
-
-extern unsigned long __must_check __strncpy_from_user(char *to, const char __user *from, unsigned long count);
-extern unsigned long __must_check __strnlen_user(const char __user *s, long n);
-
-static inline unsigned long __must_check copy_from_user(void *to, const void __user *from, unsigned long n)
-{
-	if (access_ok(VERIFY_READ, from, n))
-		n = __copy_from_user(to, from, n);
-	else /* security hole - plug it */
-		memzero(to, n);
-	return n;
-}
-
-static inline unsigned long __must_check copy_to_user(void __user *to, const void *from, unsigned long n)
-{
-	if (access_ok(VERIFY_WRITE, to, n))
-		n = __copy_to_user(to, from, n);
-	return n;
-}
-
-#define __copy_to_user_inatomic __copy_to_user
-#define __copy_from_user_inatomic __copy_from_user
-
-static inline unsigned long __must_check clear_user(void __user *to, unsigned long n)
-{
-	if (access_ok(VERIFY_WRITE, to, n))
-		n = __clear_user(to, n);
-	return n;
-}
-
-static inline long __must_check strncpy_from_user(char *dst, const char __user *src, long count)
-{
-	long res = -EFAULT;
-	if (access_ok(VERIFY_READ, src, 1))
-		res = __strncpy_from_user(dst, src, count);
-	return res;
-}
-
-#define strlen_user(s)	strnlen_user(s, ~0UL >> 1)
-
-static inline long __must_check strnlen_user(const char __user *s, long n)
-{
-	unsigned long res = 0;
-
-	if (__addr_ok(s))
-		res = __strnlen_user(s, n);
-
-	return res;
-}
-
-#endif /* _ASMARM_UACCESS_H */
diff --git a/include/asm-arm/unistd.h b/include/asm-arm/unistd.h
deleted file mode 100644
index 7c570082b1e0..000000000000
--- a/include/asm-arm/unistd.h
+++ /dev/null
@@ -1,450 +0,0 @@
-/*
- *  linux/include/asm-arm/unistd.h
- *
- *  Copyright (C) 2001-2005 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * Please forward _all_ changes to this file to rmk@arm.linux.org.uk,
- * no matter what the change is.  Thanks!
- */
-#ifndef __ASM_ARM_UNISTD_H
-#define __ASM_ARM_UNISTD_H
-
-#define __NR_OABI_SYSCALL_BASE	0x900000
-
-#if defined(__thumb__) || defined(__ARM_EABI__)
-#define __NR_SYSCALL_BASE	0
-#else
-#define __NR_SYSCALL_BASE	__NR_OABI_SYSCALL_BASE
-#endif
-
-/*
- * This file contains the system call numbers.
- */
-
-#define __NR_restart_syscall		(__NR_SYSCALL_BASE+  0)
-#define __NR_exit			(__NR_SYSCALL_BASE+  1)
-#define __NR_fork			(__NR_SYSCALL_BASE+  2)
-#define __NR_read			(__NR_SYSCALL_BASE+  3)
-#define __NR_write			(__NR_SYSCALL_BASE+  4)
-#define __NR_open			(__NR_SYSCALL_BASE+  5)
-#define __NR_close			(__NR_SYSCALL_BASE+  6)
-					/* 7 was sys_waitpid */
-#define __NR_creat			(__NR_SYSCALL_BASE+  8)
-#define __NR_link			(__NR_SYSCALL_BASE+  9)
-#define __NR_unlink			(__NR_SYSCALL_BASE+ 10)
-#define __NR_execve			(__NR_SYSCALL_BASE+ 11)
-#define __NR_chdir			(__NR_SYSCALL_BASE+ 12)
-#define __NR_time			(__NR_SYSCALL_BASE+ 13)
-#define __NR_mknod			(__NR_SYSCALL_BASE+ 14)
-#define __NR_chmod			(__NR_SYSCALL_BASE+ 15)
-#define __NR_lchown			(__NR_SYSCALL_BASE+ 16)
-					/* 17 was sys_break */
-					/* 18 was sys_stat */
-#define __NR_lseek			(__NR_SYSCALL_BASE+ 19)
-#define __NR_getpid			(__NR_SYSCALL_BASE+ 20)
-#define __NR_mount			(__NR_SYSCALL_BASE+ 21)
-#define __NR_umount			(__NR_SYSCALL_BASE+ 22)
-#define __NR_setuid			(__NR_SYSCALL_BASE+ 23)
-#define __NR_getuid			(__NR_SYSCALL_BASE+ 24)
-#define __NR_stime			(__NR_SYSCALL_BASE+ 25)
-#define __NR_ptrace			(__NR_SYSCALL_BASE+ 26)
-#define __NR_alarm			(__NR_SYSCALL_BASE+ 27)
-					/* 28 was sys_fstat */
-#define __NR_pause			(__NR_SYSCALL_BASE+ 29)
-#define __NR_utime			(__NR_SYSCALL_BASE+ 30)
-					/* 31 was sys_stty */
-					/* 32 was sys_gtty */
-#define __NR_access			(__NR_SYSCALL_BASE+ 33)
-#define __NR_nice			(__NR_SYSCALL_BASE+ 34)
-					/* 35 was sys_ftime */
-#define __NR_sync			(__NR_SYSCALL_BASE+ 36)
-#define __NR_kill			(__NR_SYSCALL_BASE+ 37)
-#define __NR_rename			(__NR_SYSCALL_BASE+ 38)
-#define __NR_mkdir			(__NR_SYSCALL_BASE+ 39)
-#define __NR_rmdir			(__NR_SYSCALL_BASE+ 40)
-#define __NR_dup			(__NR_SYSCALL_BASE+ 41)
-#define __NR_pipe			(__NR_SYSCALL_BASE+ 42)
-#define __NR_times			(__NR_SYSCALL_BASE+ 43)
-					/* 44 was sys_prof */
-#define __NR_brk			(__NR_SYSCALL_BASE+ 45)
-#define __NR_setgid			(__NR_SYSCALL_BASE+ 46)
-#define __NR_getgid			(__NR_SYSCALL_BASE+ 47)
-					/* 48 was sys_signal */
-#define __NR_geteuid			(__NR_SYSCALL_BASE+ 49)
-#define __NR_getegid			(__NR_SYSCALL_BASE+ 50)
-#define __NR_acct			(__NR_SYSCALL_BASE+ 51)
-#define __NR_umount2			(__NR_SYSCALL_BASE+ 52)
-					/* 53 was sys_lock */
-#define __NR_ioctl			(__NR_SYSCALL_BASE+ 54)
-#define __NR_fcntl			(__NR_SYSCALL_BASE+ 55)
-					/* 56 was sys_mpx */
-#define __NR_setpgid			(__NR_SYSCALL_BASE+ 57)
-					/* 58 was sys_ulimit */
-					/* 59 was sys_olduname */
-#define __NR_umask			(__NR_SYSCALL_BASE+ 60)
-#define __NR_chroot			(__NR_SYSCALL_BASE+ 61)
-#define __NR_ustat			(__NR_SYSCALL_BASE+ 62)
-#define __NR_dup2			(__NR_SYSCALL_BASE+ 63)
-#define __NR_getppid			(__NR_SYSCALL_BASE+ 64)
-#define __NR_getpgrp			(__NR_SYSCALL_BASE+ 65)
-#define __NR_setsid			(__NR_SYSCALL_BASE+ 66)
-#define __NR_sigaction			(__NR_SYSCALL_BASE+ 67)
-					/* 68 was sys_sgetmask */
-					/* 69 was sys_ssetmask */
-#define __NR_setreuid			(__NR_SYSCALL_BASE+ 70)
-#define __NR_setregid			(__NR_SYSCALL_BASE+ 71)
-#define __NR_sigsuspend			(__NR_SYSCALL_BASE+ 72)
-#define __NR_sigpending			(__NR_SYSCALL_BASE+ 73)
-#define __NR_sethostname		(__NR_SYSCALL_BASE+ 74)
-#define __NR_setrlimit			(__NR_SYSCALL_BASE+ 75)
-#define __NR_getrlimit			(__NR_SYSCALL_BASE+ 76)	/* Back compat 2GB limited rlimit */
-#define __NR_getrusage			(__NR_SYSCALL_BASE+ 77)
-#define __NR_gettimeofday		(__NR_SYSCALL_BASE+ 78)
-#define __NR_settimeofday		(__NR_SYSCALL_BASE+ 79)
-#define __NR_getgroups			(__NR_SYSCALL_BASE+ 80)
-#define __NR_setgroups			(__NR_SYSCALL_BASE+ 81)
-#define __NR_select			(__NR_SYSCALL_BASE+ 82)
-#define __NR_symlink			(__NR_SYSCALL_BASE+ 83)
-					/* 84 was sys_lstat */
-#define __NR_readlink			(__NR_SYSCALL_BASE+ 85)
-#define __NR_uselib			(__NR_SYSCALL_BASE+ 86)
-#define __NR_swapon			(__NR_SYSCALL_BASE+ 87)
-#define __NR_reboot			(__NR_SYSCALL_BASE+ 88)
-#define __NR_readdir			(__NR_SYSCALL_BASE+ 89)
-#define __NR_mmap			(__NR_SYSCALL_BASE+ 90)
-#define __NR_munmap			(__NR_SYSCALL_BASE+ 91)
-#define __NR_truncate			(__NR_SYSCALL_BASE+ 92)
-#define __NR_ftruncate			(__NR_SYSCALL_BASE+ 93)
-#define __NR_fchmod			(__NR_SYSCALL_BASE+ 94)
-#define __NR_fchown			(__NR_SYSCALL_BASE+ 95)
-#define __NR_getpriority		(__NR_SYSCALL_BASE+ 96)
-#define __NR_setpriority		(__NR_SYSCALL_BASE+ 97)
-					/* 98 was sys_profil */
-#define __NR_statfs			(__NR_SYSCALL_BASE+ 99)
-#define __NR_fstatfs			(__NR_SYSCALL_BASE+100)
-					/* 101 was sys_ioperm */
-#define __NR_socketcall			(__NR_SYSCALL_BASE+102)
-#define __NR_syslog			(__NR_SYSCALL_BASE+103)
-#define __NR_setitimer			(__NR_SYSCALL_BASE+104)
-#define __NR_getitimer			(__NR_SYSCALL_BASE+105)
-#define __NR_stat			(__NR_SYSCALL_BASE+106)
-#define __NR_lstat			(__NR_SYSCALL_BASE+107)
-#define __NR_fstat			(__NR_SYSCALL_BASE+108)
-					/* 109 was sys_uname */
-					/* 110 was sys_iopl */
-#define __NR_vhangup			(__NR_SYSCALL_BASE+111)
-					/* 112 was sys_idle */
-#define __NR_syscall			(__NR_SYSCALL_BASE+113) /* syscall to call a syscall! */
-#define __NR_wait4			(__NR_SYSCALL_BASE+114)
-#define __NR_swapoff			(__NR_SYSCALL_BASE+115)
-#define __NR_sysinfo			(__NR_SYSCALL_BASE+116)
-#define __NR_ipc			(__NR_SYSCALL_BASE+117)
-#define __NR_fsync			(__NR_SYSCALL_BASE+118)
-#define __NR_sigreturn			(__NR_SYSCALL_BASE+119)
-#define __NR_clone			(__NR_SYSCALL_BASE+120)
-#define __NR_setdomainname		(__NR_SYSCALL_BASE+121)
-#define __NR_uname			(__NR_SYSCALL_BASE+122)
-					/* 123 was sys_modify_ldt */
-#define __NR_adjtimex			(__NR_SYSCALL_BASE+124)
-#define __NR_mprotect			(__NR_SYSCALL_BASE+125)
-#define __NR_sigprocmask		(__NR_SYSCALL_BASE+126)
-					/* 127 was sys_create_module */
-#define __NR_init_module		(__NR_SYSCALL_BASE+128)
-#define __NR_delete_module		(__NR_SYSCALL_BASE+129)
-					/* 130 was sys_get_kernel_syms */
-#define __NR_quotactl			(__NR_SYSCALL_BASE+131)
-#define __NR_getpgid			(__NR_SYSCALL_BASE+132)
-#define __NR_fchdir			(__NR_SYSCALL_BASE+133)
-#define __NR_bdflush			(__NR_SYSCALL_BASE+134)
-#define __NR_sysfs			(__NR_SYSCALL_BASE+135)
-#define __NR_personality		(__NR_SYSCALL_BASE+136)
-					/* 137 was sys_afs_syscall */
-#define __NR_setfsuid			(__NR_SYSCALL_BASE+138)
-#define __NR_setfsgid			(__NR_SYSCALL_BASE+139)
-#define __NR__llseek			(__NR_SYSCALL_BASE+140)
-#define __NR_getdents			(__NR_SYSCALL_BASE+141)
-#define __NR__newselect			(__NR_SYSCALL_BASE+142)
-#define __NR_flock			(__NR_SYSCALL_BASE+143)
-#define __NR_msync			(__NR_SYSCALL_BASE+144)
-#define __NR_readv			(__NR_SYSCALL_BASE+145)
-#define __NR_writev			(__NR_SYSCALL_BASE+146)
-#define __NR_getsid			(__NR_SYSCALL_BASE+147)
-#define __NR_fdatasync			(__NR_SYSCALL_BASE+148)
-#define __NR__sysctl			(__NR_SYSCALL_BASE+149)
-#define __NR_mlock			(__NR_SYSCALL_BASE+150)
-#define __NR_munlock			(__NR_SYSCALL_BASE+151)
-#define __NR_mlockall			(__NR_SYSCALL_BASE+152)
-#define __NR_munlockall			(__NR_SYSCALL_BASE+153)
-#define __NR_sched_setparam		(__NR_SYSCALL_BASE+154)
-#define __NR_sched_getparam		(__NR_SYSCALL_BASE+155)
-#define __NR_sched_setscheduler		(__NR_SYSCALL_BASE+156)
-#define __NR_sched_getscheduler		(__NR_SYSCALL_BASE+157)
-#define __NR_sched_yield		(__NR_SYSCALL_BASE+158)
-#define __NR_sched_get_priority_max	(__NR_SYSCALL_BASE+159)
-#define __NR_sched_get_priority_min	(__NR_SYSCALL_BASE+160)
-#define __NR_sched_rr_get_interval	(__NR_SYSCALL_BASE+161)
-#define __NR_nanosleep			(__NR_SYSCALL_BASE+162)
-#define __NR_mremap			(__NR_SYSCALL_BASE+163)
-#define __NR_setresuid			(__NR_SYSCALL_BASE+164)
-#define __NR_getresuid			(__NR_SYSCALL_BASE+165)
-					/* 166 was sys_vm86 */
-					/* 167 was sys_query_module */
-#define __NR_poll			(__NR_SYSCALL_BASE+168)
-#define __NR_nfsservctl			(__NR_SYSCALL_BASE+169)
-#define __NR_setresgid			(__NR_SYSCALL_BASE+170)
-#define __NR_getresgid			(__NR_SYSCALL_BASE+171)
-#define __NR_prctl			(__NR_SYSCALL_BASE+172)
-#define __NR_rt_sigreturn		(__NR_SYSCALL_BASE+173)
-#define __NR_rt_sigaction		(__NR_SYSCALL_BASE+174)
-#define __NR_rt_sigprocmask		(__NR_SYSCALL_BASE+175)
-#define __NR_rt_sigpending		(__NR_SYSCALL_BASE+176)
-#define __NR_rt_sigtimedwait		(__NR_SYSCALL_BASE+177)
-#define __NR_rt_sigqueueinfo		(__NR_SYSCALL_BASE+178)
-#define __NR_rt_sigsuspend		(__NR_SYSCALL_BASE+179)
-#define __NR_pread64			(__NR_SYSCALL_BASE+180)
-#define __NR_pwrite64			(__NR_SYSCALL_BASE+181)
-#define __NR_chown			(__NR_SYSCALL_BASE+182)
-#define __NR_getcwd			(__NR_SYSCALL_BASE+183)
-#define __NR_capget			(__NR_SYSCALL_BASE+184)
-#define __NR_capset			(__NR_SYSCALL_BASE+185)
-#define __NR_sigaltstack		(__NR_SYSCALL_BASE+186)
-#define __NR_sendfile			(__NR_SYSCALL_BASE+187)
-					/* 188 reserved */
-					/* 189 reserved */
-#define __NR_vfork			(__NR_SYSCALL_BASE+190)
-#define __NR_ugetrlimit			(__NR_SYSCALL_BASE+191)	/* SuS compliant getrlimit */
-#define __NR_mmap2			(__NR_SYSCALL_BASE+192)
-#define __NR_truncate64			(__NR_SYSCALL_BASE+193)
-#define __NR_ftruncate64		(__NR_SYSCALL_BASE+194)
-#define __NR_stat64			(__NR_SYSCALL_BASE+195)
-#define __NR_lstat64			(__NR_SYSCALL_BASE+196)
-#define __NR_fstat64			(__NR_SYSCALL_BASE+197)
-#define __NR_lchown32			(__NR_SYSCALL_BASE+198)
-#define __NR_getuid32			(__NR_SYSCALL_BASE+199)
-#define __NR_getgid32			(__NR_SYSCALL_BASE+200)
-#define __NR_geteuid32			(__NR_SYSCALL_BASE+201)
-#define __NR_getegid32			(__NR_SYSCALL_BASE+202)
-#define __NR_setreuid32			(__NR_SYSCALL_BASE+203)
-#define __NR_setregid32			(__NR_SYSCALL_BASE+204)
-#define __NR_getgroups32		(__NR_SYSCALL_BASE+205)
-#define __NR_setgroups32		(__NR_SYSCALL_BASE+206)
-#define __NR_fchown32			(__NR_SYSCALL_BASE+207)
-#define __NR_setresuid32		(__NR_SYSCALL_BASE+208)
-#define __NR_getresuid32		(__NR_SYSCALL_BASE+209)
-#define __NR_setresgid32		(__NR_SYSCALL_BASE+210)
-#define __NR_getresgid32		(__NR_SYSCALL_BASE+211)
-#define __NR_chown32			(__NR_SYSCALL_BASE+212)
-#define __NR_setuid32			(__NR_SYSCALL_BASE+213)
-#define __NR_setgid32			(__NR_SYSCALL_BASE+214)
-#define __NR_setfsuid32			(__NR_SYSCALL_BASE+215)
-#define __NR_setfsgid32			(__NR_SYSCALL_BASE+216)
-#define __NR_getdents64			(__NR_SYSCALL_BASE+217)
-#define __NR_pivot_root			(__NR_SYSCALL_BASE+218)
-#define __NR_mincore			(__NR_SYSCALL_BASE+219)
-#define __NR_madvise			(__NR_SYSCALL_BASE+220)
-#define __NR_fcntl64			(__NR_SYSCALL_BASE+221)
-					/* 222 for tux */
-					/* 223 is unused */
-#define __NR_gettid			(__NR_SYSCALL_BASE+224)
-#define __NR_readahead			(__NR_SYSCALL_BASE+225)
-#define __NR_setxattr			(__NR_SYSCALL_BASE+226)
-#define __NR_lsetxattr			(__NR_SYSCALL_BASE+227)
-#define __NR_fsetxattr			(__NR_SYSCALL_BASE+228)
-#define __NR_getxattr			(__NR_SYSCALL_BASE+229)
-#define __NR_lgetxattr			(__NR_SYSCALL_BASE+230)
-#define __NR_fgetxattr			(__NR_SYSCALL_BASE+231)
-#define __NR_listxattr			(__NR_SYSCALL_BASE+232)
-#define __NR_llistxattr			(__NR_SYSCALL_BASE+233)
-#define __NR_flistxattr			(__NR_SYSCALL_BASE+234)
-#define __NR_removexattr		(__NR_SYSCALL_BASE+235)
-#define __NR_lremovexattr		(__NR_SYSCALL_BASE+236)
-#define __NR_fremovexattr		(__NR_SYSCALL_BASE+237)
-#define __NR_tkill			(__NR_SYSCALL_BASE+238)
-#define __NR_sendfile64			(__NR_SYSCALL_BASE+239)
-#define __NR_futex			(__NR_SYSCALL_BASE+240)
-#define __NR_sched_setaffinity		(__NR_SYSCALL_BASE+241)
-#define __NR_sched_getaffinity		(__NR_SYSCALL_BASE+242)
-#define __NR_io_setup			(__NR_SYSCALL_BASE+243)
-#define __NR_io_destroy			(__NR_SYSCALL_BASE+244)
-#define __NR_io_getevents		(__NR_SYSCALL_BASE+245)
-#define __NR_io_submit			(__NR_SYSCALL_BASE+246)
-#define __NR_io_cancel			(__NR_SYSCALL_BASE+247)
-#define __NR_exit_group			(__NR_SYSCALL_BASE+248)
-#define __NR_lookup_dcookie		(__NR_SYSCALL_BASE+249)
-#define __NR_epoll_create		(__NR_SYSCALL_BASE+250)
-#define __NR_epoll_ctl			(__NR_SYSCALL_BASE+251)
-#define __NR_epoll_wait			(__NR_SYSCALL_BASE+252)
-#define __NR_remap_file_pages		(__NR_SYSCALL_BASE+253)
-					/* 254 for set_thread_area */
-					/* 255 for get_thread_area */
-#define __NR_set_tid_address		(__NR_SYSCALL_BASE+256)
-#define __NR_timer_create		(__NR_SYSCALL_BASE+257)
-#define __NR_timer_settime		(__NR_SYSCALL_BASE+258)
-#define __NR_timer_gettime		(__NR_SYSCALL_BASE+259)
-#define __NR_timer_getoverrun		(__NR_SYSCALL_BASE+260)
-#define __NR_timer_delete		(__NR_SYSCALL_BASE+261)
-#define __NR_clock_settime		(__NR_SYSCALL_BASE+262)
-#define __NR_clock_gettime		(__NR_SYSCALL_BASE+263)
-#define __NR_clock_getres		(__NR_SYSCALL_BASE+264)
-#define __NR_clock_nanosleep		(__NR_SYSCALL_BASE+265)
-#define __NR_statfs64			(__NR_SYSCALL_BASE+266)
-#define __NR_fstatfs64			(__NR_SYSCALL_BASE+267)
-#define __NR_tgkill			(__NR_SYSCALL_BASE+268)
-#define __NR_utimes			(__NR_SYSCALL_BASE+269)
-#define __NR_arm_fadvise64_64		(__NR_SYSCALL_BASE+270)
-#define __NR_pciconfig_iobase		(__NR_SYSCALL_BASE+271)
-#define __NR_pciconfig_read		(__NR_SYSCALL_BASE+272)
-#define __NR_pciconfig_write		(__NR_SYSCALL_BASE+273)
-#define __NR_mq_open			(__NR_SYSCALL_BASE+274)
-#define __NR_mq_unlink			(__NR_SYSCALL_BASE+275)
-#define __NR_mq_timedsend		(__NR_SYSCALL_BASE+276)
-#define __NR_mq_timedreceive		(__NR_SYSCALL_BASE+277)
-#define __NR_mq_notify			(__NR_SYSCALL_BASE+278)
-#define __NR_mq_getsetattr		(__NR_SYSCALL_BASE+279)
-#define __NR_waitid			(__NR_SYSCALL_BASE+280)
-#define __NR_socket			(__NR_SYSCALL_BASE+281)
-#define __NR_bind			(__NR_SYSCALL_BASE+282)
-#define __NR_connect			(__NR_SYSCALL_BASE+283)
-#define __NR_listen			(__NR_SYSCALL_BASE+284)
-#define __NR_accept			(__NR_SYSCALL_BASE+285)
-#define __NR_getsockname		(__NR_SYSCALL_BASE+286)
-#define __NR_getpeername		(__NR_SYSCALL_BASE+287)
-#define __NR_socketpair			(__NR_SYSCALL_BASE+288)
-#define __NR_send			(__NR_SYSCALL_BASE+289)
-#define __NR_sendto			(__NR_SYSCALL_BASE+290)
-#define __NR_recv			(__NR_SYSCALL_BASE+291)
-#define __NR_recvfrom			(__NR_SYSCALL_BASE+292)
-#define __NR_shutdown			(__NR_SYSCALL_BASE+293)
-#define __NR_setsockopt			(__NR_SYSCALL_BASE+294)
-#define __NR_getsockopt			(__NR_SYSCALL_BASE+295)
-#define __NR_sendmsg			(__NR_SYSCALL_BASE+296)
-#define __NR_recvmsg			(__NR_SYSCALL_BASE+297)
-#define __NR_semop			(__NR_SYSCALL_BASE+298)
-#define __NR_semget			(__NR_SYSCALL_BASE+299)
-#define __NR_semctl			(__NR_SYSCALL_BASE+300)
-#define __NR_msgsnd			(__NR_SYSCALL_BASE+301)
-#define __NR_msgrcv			(__NR_SYSCALL_BASE+302)
-#define __NR_msgget			(__NR_SYSCALL_BASE+303)
-#define __NR_msgctl			(__NR_SYSCALL_BASE+304)
-#define __NR_shmat			(__NR_SYSCALL_BASE+305)
-#define __NR_shmdt			(__NR_SYSCALL_BASE+306)
-#define __NR_shmget			(__NR_SYSCALL_BASE+307)
-#define __NR_shmctl			(__NR_SYSCALL_BASE+308)
-#define __NR_add_key			(__NR_SYSCALL_BASE+309)
-#define __NR_request_key		(__NR_SYSCALL_BASE+310)
-#define __NR_keyctl			(__NR_SYSCALL_BASE+311)
-#define __NR_semtimedop			(__NR_SYSCALL_BASE+312)
-#define __NR_vserver			(__NR_SYSCALL_BASE+313)
-#define __NR_ioprio_set			(__NR_SYSCALL_BASE+314)
-#define __NR_ioprio_get			(__NR_SYSCALL_BASE+315)
-#define __NR_inotify_init		(__NR_SYSCALL_BASE+316)
-#define __NR_inotify_add_watch		(__NR_SYSCALL_BASE+317)
-#define __NR_inotify_rm_watch		(__NR_SYSCALL_BASE+318)
-#define __NR_mbind			(__NR_SYSCALL_BASE+319)
-#define __NR_get_mempolicy		(__NR_SYSCALL_BASE+320)
-#define __NR_set_mempolicy		(__NR_SYSCALL_BASE+321)
-#define __NR_openat			(__NR_SYSCALL_BASE+322)
-#define __NR_mkdirat			(__NR_SYSCALL_BASE+323)
-#define __NR_mknodat			(__NR_SYSCALL_BASE+324)
-#define __NR_fchownat			(__NR_SYSCALL_BASE+325)
-#define __NR_futimesat			(__NR_SYSCALL_BASE+326)
-#define __NR_fstatat64			(__NR_SYSCALL_BASE+327)
-#define __NR_unlinkat			(__NR_SYSCALL_BASE+328)
-#define __NR_renameat			(__NR_SYSCALL_BASE+329)
-#define __NR_linkat			(__NR_SYSCALL_BASE+330)
-#define __NR_symlinkat			(__NR_SYSCALL_BASE+331)
-#define __NR_readlinkat			(__NR_SYSCALL_BASE+332)
-#define __NR_fchmodat			(__NR_SYSCALL_BASE+333)
-#define __NR_faccessat			(__NR_SYSCALL_BASE+334)
-					/* 335 for pselect6 */
-					/* 336 for ppoll */
-#define __NR_unshare			(__NR_SYSCALL_BASE+337)
-#define __NR_set_robust_list		(__NR_SYSCALL_BASE+338)
-#define __NR_get_robust_list		(__NR_SYSCALL_BASE+339)
-#define __NR_splice			(__NR_SYSCALL_BASE+340)
-#define __NR_arm_sync_file_range	(__NR_SYSCALL_BASE+341)
-#define __NR_sync_file_range2		__NR_arm_sync_file_range
-#define __NR_tee			(__NR_SYSCALL_BASE+342)
-#define __NR_vmsplice			(__NR_SYSCALL_BASE+343)
-#define __NR_move_pages			(__NR_SYSCALL_BASE+344)
-#define __NR_getcpu			(__NR_SYSCALL_BASE+345)
-					/* 346 for epoll_pwait */
-#define __NR_kexec_load			(__NR_SYSCALL_BASE+347)
-#define __NR_utimensat			(__NR_SYSCALL_BASE+348)
-#define __NR_signalfd			(__NR_SYSCALL_BASE+349)
-#define __NR_timerfd_create		(__NR_SYSCALL_BASE+350)
-#define __NR_eventfd			(__NR_SYSCALL_BASE+351)
-#define __NR_fallocate			(__NR_SYSCALL_BASE+352)
-#define __NR_timerfd_settime		(__NR_SYSCALL_BASE+353)
-#define __NR_timerfd_gettime		(__NR_SYSCALL_BASE+354)
-
-/*
- * The following SWIs are ARM private.
- */
-#define __ARM_NR_BASE			(__NR_SYSCALL_BASE+0x0f0000)
-#define __ARM_NR_breakpoint		(__ARM_NR_BASE+1)
-#define __ARM_NR_cacheflush		(__ARM_NR_BASE+2)
-#define __ARM_NR_usr26			(__ARM_NR_BASE+3)
-#define __ARM_NR_usr32			(__ARM_NR_BASE+4)
-#define __ARM_NR_set_tls		(__ARM_NR_BASE+5)
-
-/*
- * The following syscalls are obsolete and no longer available for EABI.
- */
-#if defined(__ARM_EABI__) && !defined(__KERNEL__)
-#undef __NR_time
-#undef __NR_umount
-#undef __NR_stime
-#undef __NR_alarm
-#undef __NR_utime
-#undef __NR_getrlimit
-#undef __NR_select
-#undef __NR_readdir
-#undef __NR_mmap
-#undef __NR_socketcall
-#undef __NR_syscall
-#undef __NR_ipc
-#endif
-
-#ifdef __KERNEL__
-
-#define __ARCH_WANT_IPC_PARSE_VERSION
-#define __ARCH_WANT_STAT64
-#define __ARCH_WANT_SYS_GETHOSTNAME
-#define __ARCH_WANT_SYS_PAUSE
-#define __ARCH_WANT_SYS_GETPGRP
-#define __ARCH_WANT_SYS_LLSEEK
-#define __ARCH_WANT_SYS_NICE
-#define __ARCH_WANT_SYS_SIGPENDING
-#define __ARCH_WANT_SYS_SIGPROCMASK
-#define __ARCH_WANT_SYS_RT_SIGACTION
-
-#if !defined(CONFIG_AEABI) || defined(CONFIG_OABI_COMPAT)
-#define __ARCH_WANT_SYS_TIME
-#define __ARCH_WANT_SYS_OLDUMOUNT
-#define __ARCH_WANT_SYS_ALARM
-#define __ARCH_WANT_SYS_UTIME
-#define __ARCH_WANT_SYS_OLD_GETRLIMIT
-#define __ARCH_WANT_OLD_READDIR
-#define __ARCH_WANT_SYS_SOCKETCALL
-#endif
-
-/*
- * "Conditional" syscalls
- *
- * What we want is __attribute__((weak,alias("sys_ni_syscall"))),
- * but it doesn't work on all toolchains, so we just do it by hand
- */
-#define cond_syscall(x) asm(".weak\t" #x "\n\t.set\t" #x ",sys_ni_syscall")
-
-/*
- * Unimplemented (or alternatively implemented) syscalls
- */
-#define __IGNORE_fadvise64_64		1
-
-#endif /* __KERNEL__ */
-#endif /* __ASM_ARM_UNISTD_H */
diff --git a/include/asm-arm/vga.h b/include/asm-arm/vga.h
deleted file mode 100644
index 1e0b913c3d71..000000000000
--- a/include/asm-arm/vga.h
+++ /dev/null
@@ -1,12 +0,0 @@
-#ifndef ASMARM_VGA_H
-#define ASMARM_VGA_H
-
-#include <asm/hardware.h>
-#include <asm/io.h>
-
-#define VGA_MAP_MEM(x,s)	(PCIMEM_BASE + (x))
-
-#define vga_readb(x)	(*((volatile unsigned char *)x))
-#define vga_writeb(x,y)	(*((volatile unsigned char *)y) = (x))
-
-#endif
diff --git a/include/asm-arm/xor.h b/include/asm-arm/xor.h
deleted file mode 100644
index e7c4cf58bed1..000000000000
--- a/include/asm-arm/xor.h
+++ /dev/null
@@ -1,141 +0,0 @@
-/*
- *  linux/include/asm-arm/xor.h
- *
- *  Copyright (C) 2001 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#include <asm-generic/xor.h>
-
-#define __XOR(a1, a2) a1 ^= a2
-
-#define GET_BLOCK_2(dst) \
-	__asm__("ldmia	%0, {%1, %2}" \
-		: "=r" (dst), "=r" (a1), "=r" (a2) \
-		: "0" (dst))
-
-#define GET_BLOCK_4(dst) \
-	__asm__("ldmia	%0, {%1, %2, %3, %4}" \
-		: "=r" (dst), "=r" (a1), "=r" (a2), "=r" (a3), "=r" (a4) \
-		: "0" (dst))
-
-#define XOR_BLOCK_2(src) \
-	__asm__("ldmia	%0!, {%1, %2}" \
-		: "=r" (src), "=r" (b1), "=r" (b2) \
-		: "0" (src)); \
-	__XOR(a1, b1); __XOR(a2, b2);
-
-#define XOR_BLOCK_4(src) \
-	__asm__("ldmia	%0!, {%1, %2, %3, %4}" \
-		: "=r" (src), "=r" (b1), "=r" (b2), "=r" (b3), "=r" (b4) \
-		: "0" (src)); \
-	__XOR(a1, b1); __XOR(a2, b2); __XOR(a3, b3); __XOR(a4, b4)
-
-#define PUT_BLOCK_2(dst) \
-	__asm__ __volatile__("stmia	%0!, {%2, %3}" \
-		: "=r" (dst) \
-		: "0" (dst), "r" (a1), "r" (a2))
-
-#define PUT_BLOCK_4(dst) \
-	__asm__ __volatile__("stmia	%0!, {%2, %3, %4, %5}" \
-		: "=r" (dst) \
-		: "0" (dst), "r" (a1), "r" (a2), "r" (a3), "r" (a4))
-
-static void
-xor_arm4regs_2(unsigned long bytes, unsigned long *p1, unsigned long *p2)
-{
-	unsigned int lines = bytes / sizeof(unsigned long) / 4;
-	register unsigned int a1 __asm__("r4");
-	register unsigned int a2 __asm__("r5");
-	register unsigned int a3 __asm__("r6");
-	register unsigned int a4 __asm__("r7");
-	register unsigned int b1 __asm__("r8");
-	register unsigned int b2 __asm__("r9");
-	register unsigned int b3 __asm__("ip");
-	register unsigned int b4 __asm__("lr");
-
-	do {
-		GET_BLOCK_4(p1);
-		XOR_BLOCK_4(p2);
-		PUT_BLOCK_4(p1);
-	} while (--lines);
-}
-
-static void
-xor_arm4regs_3(unsigned long bytes, unsigned long *p1, unsigned long *p2,
-		unsigned long *p3)
-{
-	unsigned int lines = bytes / sizeof(unsigned long) / 4;
-	register unsigned int a1 __asm__("r4");
-	register unsigned int a2 __asm__("r5");
-	register unsigned int a3 __asm__("r6");
-	register unsigned int a4 __asm__("r7");
-	register unsigned int b1 __asm__("r8");
-	register unsigned int b2 __asm__("r9");
-	register unsigned int b3 __asm__("ip");
-	register unsigned int b4 __asm__("lr");
-
-	do {
-		GET_BLOCK_4(p1);
-		XOR_BLOCK_4(p2);
-		XOR_BLOCK_4(p3);
-		PUT_BLOCK_4(p1);
-	} while (--lines);
-}
-
-static void
-xor_arm4regs_4(unsigned long bytes, unsigned long *p1, unsigned long *p2,
-		unsigned long *p3, unsigned long *p4)
-{
-	unsigned int lines = bytes / sizeof(unsigned long) / 2;
-	register unsigned int a1 __asm__("r8");
-	register unsigned int a2 __asm__("r9");
-	register unsigned int b1 __asm__("ip");
-	register unsigned int b2 __asm__("lr");
-
-	do {
-		GET_BLOCK_2(p1);
-		XOR_BLOCK_2(p2);
-		XOR_BLOCK_2(p3);
-		XOR_BLOCK_2(p4);
-		PUT_BLOCK_2(p1);
-	} while (--lines);
-}
-
-static void
-xor_arm4regs_5(unsigned long bytes, unsigned long *p1, unsigned long *p2,
-		unsigned long *p3, unsigned long *p4, unsigned long *p5)
-{
-	unsigned int lines = bytes / sizeof(unsigned long) / 2;
-	register unsigned int a1 __asm__("r8");
-	register unsigned int a2 __asm__("r9");
-	register unsigned int b1 __asm__("ip");
-	register unsigned int b2 __asm__("lr");
-
-	do {
-		GET_BLOCK_2(p1);
-		XOR_BLOCK_2(p2);
-		XOR_BLOCK_2(p3);
-		XOR_BLOCK_2(p4);
-		XOR_BLOCK_2(p5);
-		PUT_BLOCK_2(p1);
-	} while (--lines);
-}
-
-static struct xor_block_template xor_block_arm4regs = {
-	.name	= "arm4regs",
-	.do_2	= xor_arm4regs_2,
-	.do_3	= xor_arm4regs_3,
-	.do_4	= xor_arm4regs_4,
-	.do_5	= xor_arm4regs_5,
-};
-
-#undef XOR_TRY_TEMPLATES
-#define XOR_TRY_TEMPLATES			\
-	do {					\
-		xor_speed(&xor_block_arm4regs);	\
-		xor_speed(&xor_block_8regs);	\
-		xor_speed(&xor_block_32regs);	\
-	} while (0)
diff --git a/include/asm-avr32/arch-at32ap/at32ap700x.h b/include/asm-avr32/arch-at32ap/at32ap700x.h
deleted file mode 100644
index d18a3053be0d..000000000000
--- a/include/asm-avr32/arch-at32ap/at32ap700x.h
+++ /dev/null
@@ -1,49 +0,0 @@
-/*
- * Pin definitions for AT32AP7000.
- *
- * Copyright (C) 2006 Atmel Corporation
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#ifndef __ASM_ARCH_AT32AP700X_H__
-#define __ASM_ARCH_AT32AP700X_H__
-
-#define GPIO_PERIPH_A	0
-#define GPIO_PERIPH_B	1
-
-/*
- * Pin numbers identifying specific GPIO pins on the chip. They can
- * also be converted to IRQ numbers by passing them through
- * gpio_to_irq().
- */
-#define GPIO_PIOA_BASE	(0)
-#define GPIO_PIOB_BASE	(GPIO_PIOA_BASE + 32)
-#define GPIO_PIOC_BASE	(GPIO_PIOB_BASE + 32)
-#define GPIO_PIOD_BASE	(GPIO_PIOC_BASE + 32)
-#define GPIO_PIOE_BASE	(GPIO_PIOD_BASE + 32)
-
-#define GPIO_PIN_PA(N)	(GPIO_PIOA_BASE + (N))
-#define GPIO_PIN_PB(N)	(GPIO_PIOB_BASE + (N))
-#define GPIO_PIN_PC(N)	(GPIO_PIOC_BASE + (N))
-#define GPIO_PIN_PD(N)	(GPIO_PIOD_BASE + (N))
-#define GPIO_PIN_PE(N)	(GPIO_PIOE_BASE + (N))
-
-
-/*
- * DMAC peripheral hardware handshaking interfaces, used with dw_dmac
- */
-#define DMAC_MCI_RX		0
-#define DMAC_MCI_TX		1
-#define DMAC_DAC_TX		2
-#define DMAC_AC97_A_RX		3
-#define DMAC_AC97_A_TX		4
-#define DMAC_AC97_B_RX		5
-#define DMAC_AC97_B_TX		6
-#define DMAC_DMAREQ_0		7
-#define DMAC_DMAREQ_1		8
-#define DMAC_DMAREQ_2		9
-#define DMAC_DMAREQ_3		10
-
-#endif /* __ASM_ARCH_AT32AP700X_H__ */
diff --git a/include/asm-avr32/arch-at32ap/board.h b/include/asm-avr32/arch-at32ap/board.h
deleted file mode 100644
index a3783861cdd2..000000000000
--- a/include/asm-avr32/arch-at32ap/board.h
+++ /dev/null
@@ -1,100 +0,0 @@
-/*
- * Platform data definitions.
- */
-#ifndef __ASM_ARCH_BOARD_H
-#define __ASM_ARCH_BOARD_H
-
-#include <linux/types.h>
-
-#define GPIO_PIN_NONE	(-1)
-
-/*
- * Clock rates for various on-board oscillators. The number of entries
- * in this array is chip-dependent.
- */
-extern unsigned long at32_board_osc_rates[];
-  
-/* Add basic devices: system manager, interrupt controller, portmuxes, etc. */
-void at32_add_system_devices(void);
-
-#define ATMEL_MAX_UART	4
-extern struct platform_device *atmel_default_console_device;
-
-struct atmel_uart_data {
-	short		use_dma_tx;	/* use transmit DMA? */
-	short		use_dma_rx;	/* use receive DMA? */
-	void __iomem	*regs;		/* virtual base address, if any */
-};
-void at32_map_usart(unsigned int hw_id, unsigned int line);
-struct platform_device *at32_add_device_usart(unsigned int id);
-
-struct eth_platform_data {
-	u32	phy_mask;
-	u8	is_rmii;
-};
-struct platform_device *
-at32_add_device_eth(unsigned int id, struct eth_platform_data *data);
-
-struct spi_board_info;
-struct platform_device *
-at32_add_device_spi(unsigned int id, struct spi_board_info *b, unsigned int n);
-
-struct atmel_lcdfb_info;
-struct platform_device *
-at32_add_device_lcdc(unsigned int id, struct atmel_lcdfb_info *data,
-		     unsigned long fbmem_start, unsigned long fbmem_len,
-		     unsigned int pin_config);
-
-struct usba_platform_data;
-struct platform_device *
-at32_add_device_usba(unsigned int id, struct usba_platform_data *data);
-
-struct ide_platform_data {
-	u8      cs;
-};
-struct platform_device *
-at32_add_device_ide(unsigned int id, unsigned int extint,
-		    struct ide_platform_data *data);
-
-/* mask says which PWM channels to mux */
-struct platform_device *at32_add_device_pwm(u32 mask);
-
-/* depending on what's hooked up, not all SSC pins will be used */
-#define	ATMEL_SSC_TK		0x01
-#define	ATMEL_SSC_TF		0x02
-#define	ATMEL_SSC_TD		0x04
-#define	ATMEL_SSC_TX		(ATMEL_SSC_TK | ATMEL_SSC_TF | ATMEL_SSC_TD)
-
-#define	ATMEL_SSC_RK		0x10
-#define	ATMEL_SSC_RF		0x20
-#define	ATMEL_SSC_RD		0x40
-#define	ATMEL_SSC_RX		(ATMEL_SSC_RK | ATMEL_SSC_RF | ATMEL_SSC_RD)
-
-struct platform_device *
-at32_add_device_ssc(unsigned int id, unsigned int flags);
-
-struct i2c_board_info;
-struct platform_device *at32_add_device_twi(unsigned int id,
-					    struct i2c_board_info *b,
-					    unsigned int n);
-
-struct mci_platform_data;
-struct platform_device *
-at32_add_device_mci(unsigned int id, struct mci_platform_data *data);
-
-struct platform_device *at32_add_device_ac97c(unsigned int id);
-struct platform_device *at32_add_device_abdac(unsigned int id);
-struct platform_device *at32_add_device_psif(unsigned int id);
-
-struct cf_platform_data {
-	int	detect_pin;
-	int	reset_pin;
-	int	vcc_pin;
-	int	ready_pin;
-	u8	cs;
-};
-struct platform_device *
-at32_add_device_cf(unsigned int id, unsigned int extint,
-		struct cf_platform_data *data);
-
-#endif /* __ASM_ARCH_BOARD_H */
diff --git a/include/asm-avr32/dma-mapping.h b/include/asm-avr32/dma-mapping.h
deleted file mode 100644
index 57dc672bab8e..000000000000
--- a/include/asm-avr32/dma-mapping.h
+++ /dev/null
@@ -1,349 +0,0 @@
-#ifndef __ASM_AVR32_DMA_MAPPING_H
-#define __ASM_AVR32_DMA_MAPPING_H
-
-#include <linux/mm.h>
-#include <linux/device.h>
-#include <linux/scatterlist.h>
-#include <asm/processor.h>
-#include <asm/cacheflush.h>
-#include <asm/io.h>
-
-extern void dma_cache_sync(struct device *dev, void *vaddr, size_t size,
-	int direction);
-
-/*
- * Return whether the given device DMA address mask can be supported
- * properly.  For example, if your device can only drive the low 24-bits
- * during bus mastering, then you would pass 0x00ffffff as the mask
- * to this function.
- */
-static inline int dma_supported(struct device *dev, u64 mask)
-{
-	/* Fix when needed. I really don't know of any limitations */
-	return 1;
-}
-
-static inline int dma_set_mask(struct device *dev, u64 dma_mask)
-{
-	if (!dev->dma_mask || !dma_supported(dev, dma_mask))
-		return -EIO;
-
-	*dev->dma_mask = dma_mask;
-	return 0;
-}
-
-/*
- * dma_map_single can't fail as it is implemented now.
- */
-static inline int dma_mapping_error(dma_addr_t addr)
-{
-	return 0;
-}
-
-/**
- * dma_alloc_coherent - allocate consistent memory for DMA
- * @dev: valid struct device pointer, or NULL for ISA and EISA-like devices
- * @size: required memory size
- * @handle: bus-specific DMA address
- *
- * Allocate some uncached, unbuffered memory for a device for
- * performing DMA.  This function allocates pages, and will
- * return the CPU-viewed address, and sets @handle to be the
- * device-viewed address.
- */
-extern void *dma_alloc_coherent(struct device *dev, size_t size,
-				dma_addr_t *handle, gfp_t gfp);
-
-/**
- * dma_free_coherent - free memory allocated by dma_alloc_coherent
- * @dev: valid struct device pointer, or NULL for ISA and EISA-like devices
- * @size: size of memory originally requested in dma_alloc_coherent
- * @cpu_addr: CPU-view address returned from dma_alloc_coherent
- * @handle: device-view address returned from dma_alloc_coherent
- *
- * Free (and unmap) a DMA buffer previously allocated by
- * dma_alloc_coherent().
- *
- * References to memory and mappings associated with cpu_addr/handle
- * during and after this call executing are illegal.
- */
-extern void dma_free_coherent(struct device *dev, size_t size,
-			      void *cpu_addr, dma_addr_t handle);
-
-/**
- * dma_alloc_writecombine - allocate write-combining memory for DMA
- * @dev: valid struct device pointer, or NULL for ISA and EISA-like devices
- * @size: required memory size
- * @handle: bus-specific DMA address
- *
- * Allocate some uncached, buffered memory for a device for
- * performing DMA.  This function allocates pages, and will
- * return the CPU-viewed address, and sets @handle to be the
- * device-viewed address.
- */
-extern void *dma_alloc_writecombine(struct device *dev, size_t size,
-				    dma_addr_t *handle, gfp_t gfp);
-
-/**
- * dma_free_coherent - free memory allocated by dma_alloc_writecombine
- * @dev: valid struct device pointer, or NULL for ISA and EISA-like devices
- * @size: size of memory originally requested in dma_alloc_writecombine
- * @cpu_addr: CPU-view address returned from dma_alloc_writecombine
- * @handle: device-view address returned from dma_alloc_writecombine
- *
- * Free (and unmap) a DMA buffer previously allocated by
- * dma_alloc_writecombine().
- *
- * References to memory and mappings associated with cpu_addr/handle
- * during and after this call executing are illegal.
- */
-extern void dma_free_writecombine(struct device *dev, size_t size,
-				  void *cpu_addr, dma_addr_t handle);
-
-/**
- * dma_map_single - map a single buffer for streaming DMA
- * @dev: valid struct device pointer, or NULL for ISA and EISA-like devices
- * @cpu_addr: CPU direct mapped address of buffer
- * @size: size of buffer to map
- * @dir: DMA transfer direction
- *
- * Ensure that any data held in the cache is appropriately discarded
- * or written back.
- *
- * The device owns this memory once this call has completed.  The CPU
- * can regain ownership by calling dma_unmap_single() or dma_sync_single().
- */
-static inline dma_addr_t
-dma_map_single(struct device *dev, void *cpu_addr, size_t size,
-	       enum dma_data_direction direction)
-{
-	dma_cache_sync(dev, cpu_addr, size, direction);
-	return virt_to_bus(cpu_addr);
-}
-
-/**
- * dma_unmap_single - unmap a single buffer previously mapped
- * @dev: valid struct device pointer, or NULL for ISA and EISA-like devices
- * @handle: DMA address of buffer
- * @size: size of buffer to map
- * @dir: DMA transfer direction
- *
- * Unmap a single streaming mode DMA translation.  The handle and size
- * must match what was provided in the previous dma_map_single() call.
- * All other usages are undefined.
- *
- * After this call, reads by the CPU to the buffer are guaranteed to see
- * whatever the device wrote there.
- */
-static inline void
-dma_unmap_single(struct device *dev, dma_addr_t dma_addr, size_t size,
-		 enum dma_data_direction direction)
-{
-
-}
-
-/**
- * dma_map_page - map a portion of a page for streaming DMA
- * @dev: valid struct device pointer, or NULL for ISA and EISA-like devices
- * @page: page that buffer resides in
- * @offset: offset into page for start of buffer
- * @size: size of buffer to map
- * @dir: DMA transfer direction
- *
- * Ensure that any data held in the cache is appropriately discarded
- * or written back.
- *
- * The device owns this memory once this call has completed.  The CPU
- * can regain ownership by calling dma_unmap_page() or dma_sync_single().
- */
-static inline dma_addr_t
-dma_map_page(struct device *dev, struct page *page,
-	     unsigned long offset, size_t size,
-	     enum dma_data_direction direction)
-{
-	return dma_map_single(dev, page_address(page) + offset,
-			      size, direction);
-}
-
-/**
- * dma_unmap_page - unmap a buffer previously mapped through dma_map_page()
- * @dev: valid struct device pointer, or NULL for ISA and EISA-like devices
- * @handle: DMA address of buffer
- * @size: size of buffer to map
- * @dir: DMA transfer direction
- *
- * Unmap a single streaming mode DMA translation.  The handle and size
- * must match what was provided in the previous dma_map_single() call.
- * All other usages are undefined.
- *
- * After this call, reads by the CPU to the buffer are guaranteed to see
- * whatever the device wrote there.
- */
-static inline void
-dma_unmap_page(struct device *dev, dma_addr_t dma_address, size_t size,
-	       enum dma_data_direction direction)
-{
-	dma_unmap_single(dev, dma_address, size, direction);
-}
-
-/**
- * dma_map_sg - map a set of SG buffers for streaming mode DMA
- * @dev: valid struct device pointer, or NULL for ISA and EISA-like devices
- * @sg: list of buffers
- * @nents: number of buffers to map
- * @dir: DMA transfer direction
- *
- * Map a set of buffers described by scatterlist in streaming
- * mode for DMA.  This is the scatter-gather version of the
- * above pci_map_single interface.  Here the scatter gather list
- * elements are each tagged with the appropriate dma address
- * and length.  They are obtained via sg_dma_{address,length}(SG).
- *
- * NOTE: An implementation may be able to use a smaller number of
- *       DMA address/length pairs than there are SG table elements.
- *       (for example via virtual mapping capabilities)
- *       The routine returns the number of addr/length pairs actually
- *       used, at most nents.
- *
- * Device ownership issues as mentioned above for pci_map_single are
- * the same here.
- */
-static inline int
-dma_map_sg(struct device *dev, struct scatterlist *sg, int nents,
-	   enum dma_data_direction direction)
-{
-	int i;
-
-	for (i = 0; i < nents; i++) {
-		char *virt;
-
-		sg[i].dma_address = page_to_bus(sg_page(&sg[i])) + sg[i].offset;
-		virt = sg_virt(&sg[i]);
-		dma_cache_sync(dev, virt, sg[i].length, direction);
-	}
-
-	return nents;
-}
-
-/**
- * dma_unmap_sg - unmap a set of SG buffers mapped by dma_map_sg
- * @dev: valid struct device pointer, or NULL for ISA and EISA-like devices
- * @sg: list of buffers
- * @nents: number of buffers to map
- * @dir: DMA transfer direction
- *
- * Unmap a set of streaming mode DMA translations.
- * Again, CPU read rules concerning calls here are the same as for
- * pci_unmap_single() above.
- */
-static inline void
-dma_unmap_sg(struct device *dev, struct scatterlist *sg, int nhwentries,
-	     enum dma_data_direction direction)
-{
-
-}
-
-/**
- * dma_sync_single_for_cpu
- * @dev: valid struct device pointer, or NULL for ISA and EISA-like devices
- * @handle: DMA address of buffer
- * @size: size of buffer to map
- * @dir: DMA transfer direction
- *
- * Make physical memory consistent for a single streaming mode DMA
- * translation after a transfer.
- *
- * If you perform a dma_map_single() but wish to interrogate the
- * buffer using the cpu, yet do not wish to teardown the DMA mapping,
- * you must call this function before doing so.  At the next point you
- * give the DMA address back to the card, you must first perform a
- * dma_sync_single_for_device, and then the device again owns the
- * buffer.
- */
-static inline void
-dma_sync_single_for_cpu(struct device *dev, dma_addr_t dma_handle,
-			size_t size, enum dma_data_direction direction)
-{
-	/*
-	 * No need to do anything since the CPU isn't supposed to
-	 * touch this memory after we flushed it at mapping- or
-	 * sync-for-device time.
-	 */
-}
-
-static inline void
-dma_sync_single_for_device(struct device *dev, dma_addr_t dma_handle,
-			   size_t size, enum dma_data_direction direction)
-{
-	dma_cache_sync(dev, bus_to_virt(dma_handle), size, direction);
-}
-
-static inline void
-dma_sync_single_range_for_cpu(struct device *dev, dma_addr_t dma_handle,
-			      unsigned long offset, size_t size,
-			      enum dma_data_direction direction)
-{
-	/* just sync everything, that's all the pci API can do */
-	dma_sync_single_for_cpu(dev, dma_handle, offset+size, direction);
-}
-
-static inline void
-dma_sync_single_range_for_device(struct device *dev, dma_addr_t dma_handle,
-				 unsigned long offset, size_t size,
-				 enum dma_data_direction direction)
-{
-	/* just sync everything, that's all the pci API can do */
-	dma_sync_single_for_device(dev, dma_handle, offset+size, direction);
-}
-
-/**
- * dma_sync_sg_for_cpu
- * @dev: valid struct device pointer, or NULL for ISA and EISA-like devices
- * @sg: list of buffers
- * @nents: number of buffers to map
- * @dir: DMA transfer direction
- *
- * Make physical memory consistent for a set of streaming
- * mode DMA translations after a transfer.
- *
- * The same as dma_sync_single_for_* but for a scatter-gather list,
- * same rules and usage.
- */
-static inline void
-dma_sync_sg_for_cpu(struct device *dev, struct scatterlist *sg,
-		    int nents, enum dma_data_direction direction)
-{
-	/*
-	 * No need to do anything since the CPU isn't supposed to
-	 * touch this memory after we flushed it at mapping- or
-	 * sync-for-device time.
-	 */
-}
-
-static inline void
-dma_sync_sg_for_device(struct device *dev, struct scatterlist *sg,
-		       int nents, enum dma_data_direction direction)
-{
-	int i;
-
-	for (i = 0; i < nents; i++) {
-		dma_cache_sync(dev, sg_virt(&sg[i]), sg[i].length, direction);
-	}
-}
-
-/* Now for the API extensions over the pci_ one */
-
-#define dma_alloc_noncoherent(d, s, h, f) dma_alloc_coherent(d, s, h, f)
-#define dma_free_noncoherent(d, s, v, h) dma_free_coherent(d, s, v, h)
-
-static inline int dma_is_consistent(struct device *dev, dma_addr_t dma_addr)
-{
-	return 1;
-}
-
-static inline int dma_get_cache_alignment(void)
-{
-	return boot_cpu_data.dcache.linesz;
-}
-
-#endif /* __ASM_AVR32_DMA_MAPPING_H */
diff --git a/include/asm-avr32/gpio.h b/include/asm-avr32/gpio.h
deleted file mode 100644
index 19e8ccc77db3..000000000000
--- a/include/asm-avr32/gpio.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef __ASM_AVR32_GPIO_H
-#define __ASM_AVR32_GPIO_H
-
-#include <asm/arch/gpio.h>
-
-#endif /* __ASM_AVR32_GPIO_H */
diff --git a/include/asm-avr32/io.h b/include/asm-avr32/io.h
deleted file mode 100644
index 8be7ea9c9047..000000000000
--- a/include/asm-avr32/io.h
+++ /dev/null
@@ -1,312 +0,0 @@
-#ifndef __ASM_AVR32_IO_H
-#define __ASM_AVR32_IO_H
-
-#include <linux/kernel.h>
-#include <linux/string.h>
-#include <linux/types.h>
-
-#include <asm/addrspace.h>
-#include <asm/byteorder.h>
-
-#include <asm/arch/io.h>
-
-/* virt_to_phys will only work when address is in P1 or P2 */
-static __inline__ unsigned long virt_to_phys(volatile void *address)
-{
-	return PHYSADDR(address);
-}
-
-static __inline__ void * phys_to_virt(unsigned long address)
-{
-	return (void *)P1SEGADDR(address);
-}
-
-#define cached_to_phys(addr)	((unsigned long)PHYSADDR(addr))
-#define uncached_to_phys(addr)	((unsigned long)PHYSADDR(addr))
-#define phys_to_cached(addr)	((void *)P1SEGADDR(addr))
-#define phys_to_uncached(addr)	((void *)P2SEGADDR(addr))
-
-/*
- * Generic IO read/write.  These perform native-endian accesses.  Note
- * that some architectures will want to re-define __raw_{read,write}w.
- */
-extern void __raw_writesb(void __iomem *addr, const void *data, int bytelen);
-extern void __raw_writesw(void __iomem *addr, const void *data, int wordlen);
-extern void __raw_writesl(void __iomem *addr, const void *data, int longlen);
-
-extern void __raw_readsb(const void __iomem *addr, void *data, int bytelen);
-extern void __raw_readsw(const void __iomem *addr, void *data, int wordlen);
-extern void __raw_readsl(const void __iomem *addr, void *data, int longlen);
-
-static inline void __raw_writeb(u8 v, volatile void __iomem *addr)
-{
-	*(volatile u8 __force *)addr = v;
-}
-static inline void __raw_writew(u16 v, volatile void __iomem *addr)
-{
-	*(volatile u16 __force *)addr = v;
-}
-static inline void __raw_writel(u32 v, volatile void __iomem *addr)
-{
-	*(volatile u32 __force *)addr = v;
-}
-
-static inline u8 __raw_readb(const volatile void __iomem *addr)
-{
-	return *(const volatile u8 __force *)addr;
-}
-static inline u16 __raw_readw(const volatile void __iomem *addr)
-{
-	return *(const volatile u16 __force *)addr;
-}
-static inline u32 __raw_readl(const volatile void __iomem *addr)
-{
-	return *(const volatile u32 __force *)addr;
-}
-
-/* Convert I/O port address to virtual address */
-#ifndef __io
-# define __io(p)	((void *)phys_to_uncached(p))
-#endif
-
-/*
- * Not really sure about the best way to slow down I/O on
- * AVR32. Defining it as a no-op until we have an actual test case.
- */
-#define SLOW_DOWN_IO	do { } while (0)
-
-#define __BUILD_MEMORY_SINGLE(pfx, bwl, type)				\
-static inline void							\
-pfx##write##bwl(type val, volatile void __iomem *addr)			\
-{									\
-	volatile type *__addr;						\
-	type __val;							\
-									\
-	__addr = (void *)__swizzle_addr_##bwl((unsigned long)(addr));	\
-	__val = pfx##ioswab##bwl(__addr, val);				\
-									\
-	BUILD_BUG_ON(sizeof(type) > sizeof(unsigned long));		\
-									\
-	*__addr = __val;						\
-}									\
-									\
-static inline type pfx##read##bwl(const volatile void __iomem *addr)	\
-{									\
-	volatile type *__addr;						\
-	type __val;							\
-									\
-	__addr = (void *)__swizzle_addr_##bwl((unsigned long)(addr));	\
-									\
-	BUILD_BUG_ON(sizeof(type) > sizeof(unsigned long));		\
-									\
-	__val = *__addr;						\
-	return pfx##ioswab##bwl(__addr, __val);				\
-}
-
-#define __BUILD_IOPORT_SINGLE(pfx, bwl, type, p, slow)			\
-static inline void pfx##out##bwl##p(type val, unsigned long port)	\
-{									\
-	volatile type *__addr;						\
-	type __val;							\
-									\
-	__addr = __io(__swizzle_addr_##bwl(port));			\
-	__val = pfx##ioswab##bwl(__addr, val);				\
-									\
-	BUILD_BUG_ON(sizeof(type) > sizeof(unsigned long));		\
-									\
-	*__addr = __val;						\
-	slow;								\
-}									\
-									\
-static inline type pfx##in##bwl##p(unsigned long port)			\
-{									\
-	volatile type *__addr;						\
-	type __val;							\
-									\
-	__addr = __io(__swizzle_addr_##bwl(port));			\
-									\
-	BUILD_BUG_ON(sizeof(type) > sizeof(unsigned long));		\
-									\
-	__val = *__addr;						\
-	slow;								\
-									\
-	return pfx##ioswab##bwl(__addr, __val);				\
-}
-
-#define __BUILD_MEMORY_PFX(bus, bwl, type)				\
-	__BUILD_MEMORY_SINGLE(bus, bwl, type)
-
-#define BUILDIO_MEM(bwl, type)						\
-	__BUILD_MEMORY_PFX(, bwl, type)					\
-	__BUILD_MEMORY_PFX(__mem_, bwl, type)
-
-#define __BUILD_IOPORT_PFX(bus, bwl, type)				\
-	__BUILD_IOPORT_SINGLE(bus, bwl, type, ,)			\
-	__BUILD_IOPORT_SINGLE(bus, bwl, type, _p, SLOW_DOWN_IO)
-
-#define BUILDIO_IOPORT(bwl, type)					\
-	__BUILD_IOPORT_PFX(, bwl, type)					\
-	__BUILD_IOPORT_PFX(__mem_, bwl, type)
-
-BUILDIO_MEM(b, u8)
-BUILDIO_MEM(w, u16)
-BUILDIO_MEM(l, u32)
-
-BUILDIO_IOPORT(b, u8)
-BUILDIO_IOPORT(w, u16)
-BUILDIO_IOPORT(l, u32)
-
-#define readb_relaxed			readb
-#define readw_relaxed			readw
-#define readl_relaxed			readl
-
-#define __BUILD_MEMORY_STRING(bwl, type)				\
-static inline void writes##bwl(volatile void __iomem *addr,		\
-			       const void *data, unsigned int count)	\
-{									\
-	const type *__data = data;					\
-									\
-	while (count--)							\
-		__mem_write##bwl(*__data++, addr);			\
-}									\
-									\
-static inline void reads##bwl(const volatile void __iomem *addr,	\
-			      void *data, unsigned int count)		\
-{									\
-	type *__data = data;						\
-									\
-	while (count--)							\
-		*__data++ = __mem_read##bwl(addr);			\
-}
-
-#define __BUILD_IOPORT_STRING(bwl, type)				\
-static inline void outs##bwl(unsigned long port, const void *data,	\
-			     unsigned int count)			\
-{									\
-	const type *__data = data;					\
-									\
-	while (count--)							\
-		__mem_out##bwl(*__data++, port);			\
-}									\
-									\
-static inline void ins##bwl(unsigned long port, void *data,		\
-			   unsigned int count)				\
-{									\
-	type *__data = data;						\
-									\
-	while (count--)							\
-		*__data++ = __mem_in##bwl(port);			\
-}
-
-#define BUILDSTRING(bwl, type)						\
-	__BUILD_MEMORY_STRING(bwl, type)				\
-	__BUILD_IOPORT_STRING(bwl, type)
-
-BUILDSTRING(b, u8)
-BUILDSTRING(w, u16)
-BUILDSTRING(l, u32)
-
-/*
- * io{read,write}{8,16,32} macros in both le (for PCI style consumers) and native be
- */
-#ifndef ioread8
-
-#define ioread8(p)		((unsigned int)readb(p))
-
-#define ioread16(p)		((unsigned int)readw(p))
-#define ioread16be(p)		((unsigned int)__raw_readw(p))
-
-#define ioread32(p)		((unsigned int)readl(p))
-#define ioread32be(p)		((unsigned int)__raw_readl(p))
-
-#define iowrite8(v,p)		writeb(v, p)
-
-#define iowrite16(v,p)		writew(v, p)
-#define iowrite16be(v,p)	__raw_writew(v, p)
-
-#define iowrite32(v,p)		writel(v, p)
-#define iowrite32be(v,p)	__raw_writel(v, p)
-
-#define ioread8_rep(p,d,c)	readsb(p,d,c)
-#define ioread16_rep(p,d,c)	readsw(p,d,c)
-#define ioread32_rep(p,d,c)	readsl(p,d,c)
-
-#define iowrite8_rep(p,s,c)	writesb(p,s,c)
-#define iowrite16_rep(p,s,c)	writesw(p,s,c)
-#define iowrite32_rep(p,s,c)	writesl(p,s,c)
-
-#endif
-
-static inline void memcpy_fromio(void * to, const volatile void __iomem *from,
-				 unsigned long count)
-{
-	memcpy(to, (const void __force *)from, count);
-}
-
-static inline void  memcpy_toio(volatile void __iomem *to, const void * from,
-				unsigned long count)
-{
-	memcpy((void __force *)to, from, count);
-}
-
-static inline void memset_io(volatile void __iomem *addr, unsigned char val,
-			     unsigned long count)
-{
-	memset((void __force *)addr, val, count);
-}
-
-#define mmiowb()
-
-#define IO_SPACE_LIMIT	0xffffffff
-
-extern void __iomem *__ioremap(unsigned long offset, size_t size,
-			       unsigned long flags);
-extern void __iounmap(void __iomem *addr);
-
-/*
- * ioremap	-   map bus memory into CPU space
- * @offset	bus address of the memory
- * @size	size of the resource to map
- *
- * ioremap performs a platform specific sequence of operations to make
- * bus memory CPU accessible via the readb/.../writel functions and
- * the other mmio helpers. The returned address is not guaranteed to
- * be usable directly as a virtual address.
- */
-#define ioremap(offset, size)			\
-	__ioremap((offset), (size), 0)
-
-#define ioremap_nocache(offset, size)		\
-	__ioremap((offset), (size), 0)
-
-#define iounmap(addr)				\
-	__iounmap(addr)
-
-#define cached(addr) P1SEGADDR(addr)
-#define uncached(addr) P2SEGADDR(addr)
-
-#define virt_to_bus virt_to_phys
-#define bus_to_virt phys_to_virt
-#define page_to_bus page_to_phys
-#define bus_to_page phys_to_page
-
-/*
- * Create a virtual mapping cookie for an IO port range.  There exists
- * no such thing as port-based I/O on AVR32, so a regular ioremap()
- * should do what we need.
- */
-#define ioport_map(port, nr)	ioremap(port, nr)
-#define ioport_unmap(port)	iounmap(port)
-
-/*
- * Convert a physical pointer to a virtual kernel pointer for /dev/mem
- * access
- */
-#define xlate_dev_mem_ptr(p)    __va(p)
-
-/*
- * Convert a virtual cached pointer to an uncached pointer
- */
-#define xlate_dev_kmem_ptr(p)   p
-
-#endif /* __ASM_AVR32_IO_H */
diff --git a/include/asm-avr32/irq.h b/include/asm-avr32/irq.h
deleted file mode 100644
index c563b7720c1a..000000000000
--- a/include/asm-avr32/irq.h
+++ /dev/null
@@ -1,24 +0,0 @@
-#ifndef __ASM_AVR32_IRQ_H
-#define __ASM_AVR32_IRQ_H
-
-#define NR_INTERNAL_IRQS	64
-
-#include <asm/arch/irq.h>
-
-#ifndef NR_IRQS
-#define NR_IRQS			(NR_INTERNAL_IRQS)
-#endif
-
-#define irq_canonicalize(i)	(i)
-
-#ifndef __ASSEMBLER__
-int nmi_enable(void);
-void nmi_disable(void);
-
-/*
- * Returns a bitmask of pending interrupts in a group.
- */
-extern unsigned long intc_get_pending(unsigned int group);
-#endif
-
-#endif /* __ASM_AVR32_IOCTLS_H */
diff --git a/include/asm-avr32/kvm.h b/include/asm-avr32/kvm.h
deleted file mode 100644
index 8c5777020e2c..000000000000
--- a/include/asm-avr32/kvm.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef __LINUX_KVM_AVR32_H
-#define __LINUX_KVM_AVR32_H
-
-/* avr32 does not support KVM */
-
-#endif
diff --git a/include/asm-avr32/namei.h b/include/asm-avr32/namei.h
deleted file mode 100644
index f0a26de06cab..000000000000
--- a/include/asm-avr32/namei.h
+++ /dev/null
@@ -1,7 +0,0 @@
-#ifndef __ASM_AVR32_NAMEI_H
-#define __ASM_AVR32_NAMEI_H
-
-/* This dummy routine may be changed to something useful */
-#define __emul_prefix() NULL
-
-#endif /* __ASM_AVR32_NAMEI_H */
diff --git a/include/asm-avr32/thread_info.h b/include/asm-avr32/thread_info.h
deleted file mode 100644
index df68631b7b27..000000000000
--- a/include/asm-avr32/thread_info.h
+++ /dev/null
@@ -1,119 +0,0 @@
-/*
- * Copyright (C) 2004-2006 Atmel Corporation
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#ifndef __ASM_AVR32_THREAD_INFO_H
-#define __ASM_AVR32_THREAD_INFO_H
-
-#include <asm/page.h>
-
-#define THREAD_SIZE_ORDER	1
-#define THREAD_SIZE		(PAGE_SIZE << THREAD_SIZE_ORDER)
-
-#ifndef __ASSEMBLY__
-#include <asm/types.h>
-
-struct task_struct;
-struct exec_domain;
-
-struct thread_info {
-	struct task_struct	*task;		/* main task structure */
-	struct exec_domain	*exec_domain;	/* execution domain */
-	unsigned long		flags;		/* low level flags */
-	__u32			cpu;
-	__s32			preempt_count;	/* 0 => preemptable, <0 => BUG */
-	__u32			rar_saved;	/* return address... */
-	__u32			rsr_saved;	/* ...and status register
-						   saved by debug handler
-						   when setting up
-						   trampoline */
-	struct restart_block	restart_block;
-	__u8			supervisor_stack[0];
-};
-
-#define INIT_THREAD_INFO(tsk)						\
-{									\
-	.task		= &tsk,						\
-	.exec_domain	= &default_exec_domain,				\
-	.flags		= 0,						\
-	.cpu		= 0,						\
-	.preempt_count	= 1,						\
-	.restart_block	= {						\
-		.fn	= do_no_restart_syscall				\
-	}								\
-}
-
-#define init_thread_info	(init_thread_union.thread_info)
-#define init_stack		(init_thread_union.stack)
-
-/*
- * Get the thread information struct from C.
- * We do the usual trick and use the lower end of the stack for this
- */
-static inline struct thread_info *current_thread_info(void)
-{
-	unsigned long addr = ~(THREAD_SIZE - 1);
-
-	asm("and %0, sp" : "=r"(addr) : "0"(addr));
-	return (struct thread_info *)addr;
-}
-
-/* thread information allocation */
-#define alloc_thread_info(ti) \
-	((struct thread_info *) __get_free_pages(GFP_KERNEL, THREAD_SIZE_ORDER))
-#define free_thread_info(ti) free_pages((unsigned long)(ti), 1)
-#define get_thread_info(ti) get_task_struct((ti)->task)
-#define put_thread_info(ti) put_task_struct((ti)->task)
-
-#endif /* !__ASSEMBLY__ */
-
-#define PREEMPT_ACTIVE		0x40000000
-
-/*
- * Thread information flags
- * - these are process state flags that various assembly files may need to access
- * - pending work-to-be-done flags are in LSW
- * - other flags in MSW
- */
-#define TIF_SYSCALL_TRACE       0       /* syscall trace active */
-#define TIF_SIGPENDING          1       /* signal pending */
-#define TIF_NEED_RESCHED        2       /* rescheduling necessary */
-#define TIF_POLLING_NRFLAG      3       /* true if poll_idle() is polling
-					   TIF_NEED_RESCHED */
-#define TIF_BREAKPOINT		4	/* enter monitor mode on return */
-#define TIF_SINGLE_STEP		5	/* single step in progress */
-#define TIF_MEMDIE		6
-#define TIF_RESTORE_SIGMASK	7	/* restore signal mask in do_signal */
-#define TIF_CPU_GOING_TO_SLEEP	8	/* CPU is entering sleep 0 mode */
-#define TIF_FREEZE		29
-#define TIF_DEBUG		30	/* debugging enabled */
-#define TIF_USERSPACE		31      /* true if FS sets userspace */
-
-#define _TIF_SYSCALL_TRACE	(1 << TIF_SYSCALL_TRACE)
-#define _TIF_SIGPENDING		(1 << TIF_SIGPENDING)
-#define _TIF_NEED_RESCHED	(1 << TIF_NEED_RESCHED)
-#define _TIF_POLLING_NRFLAG	(1 << TIF_POLLING_NRFLAG)
-#define _TIF_SINGLE_STEP	(1 << TIF_SINGLE_STEP)
-#define _TIF_MEMDIE		(1 << TIF_MEMDIE)
-#define _TIF_RESTORE_SIGMASK	(1 << TIF_RESTORE_SIGMASK)
-#define _TIF_CPU_GOING_TO_SLEEP (1 << TIF_CPU_GOING_TO_SLEEP)
-
-/* Note: The masks below must never span more than 16 bits! */
-
-/* work to do on interrupt/exception return */
-#define _TIF_WORK_MASK				\
-	((1 << TIF_SIGPENDING)			\
-	 | (1 << TIF_NEED_RESCHED)		\
-	 | (1 << TIF_POLLING_NRFLAG)		\
-	 | (1 << TIF_BREAKPOINT)		\
-	 | (1 << TIF_RESTORE_SIGMASK))
-
-/* work to do on any return to userspace */
-#define _TIF_ALLWORK_MASK	(_TIF_WORK_MASK | (1 << TIF_SYSCALL_TRACE))
-/* work to do on return from debug mode */
-#define _TIF_DBGWORK_MASK	(_TIF_WORK_MASK & ~(1 << TIF_BREAKPOINT))
-
-#endif /* __ASM_AVR32_THREAD_INFO_H */
diff --git a/include/asm-blackfin/Kbuild b/include/asm-blackfin/Kbuild
deleted file mode 100644
index 71f8fe783258..000000000000
--- a/include/asm-blackfin/Kbuild
+++ /dev/null
@@ -1,3 +0,0 @@
-include include/asm-generic/Kbuild.asm
-
-header-y += fixed_code.h
diff --git a/include/asm-blackfin/delay.h b/include/asm-blackfin/delay.h
deleted file mode 100644
index 473a8113277f..000000000000
--- a/include/asm-blackfin/delay.h
+++ /dev/null
@@ -1,62 +0,0 @@
-/*
- * delay.h - delay functions
- *
- * Copyright (c) 2004-2007 Analog Devices Inc.
- *
- * Licensed under the GPL-2 or later.
- */
-
-#ifndef __ASM_DELAY_H__
-#define __ASM_DELAY_H__
-
-#include <asm/mach/anomaly.h>
-
-static inline void __delay(unsigned long loops)
-{
-	if (ANOMALY_05000312) {
-		/* Interrupted loads to loop registers -> bad */
-		unsigned long tmp;
-		__asm__ __volatile__(
-			"[--SP] = LC0;"
-			"[--SP] = LT0;"
-			"[--SP] = LB0;"
-			"LSETUP (1f,1f) LC0 = %1;"
-			"1: NOP;"
-			/* We take advantage of the fact that LC0 is 0 at
-			 * the end of the loop.  Otherwise we'd need some
-			 * NOPs after the CLI here.
-			 */
-			"CLI %0;"
-			"LB0 = [SP++];"
-			"LT0 = [SP++];"
-			"LC0 = [SP++];"
-			"STI %0;"
-			: "=d" (tmp)
-			: "a" (loops)
-		);
-	} else
-		__asm__ __volatile__ (
-			"LSETUP(1f, 1f) LC0 = %0;"
-			"1: NOP;"
-			:
-			: "a" (loops)
-			: "LT0", "LB0", "LC0"
-		);
-}
-
-#include <linux/param.h>	/* needed for HZ */
-
-/*
- * Use only for very small delays ( < 1 msec).  Should probably use a
- * lookup table, really, as the multiplications take much too long with
- * short delays.  This is a "reasonable" implementation, though (and the
- * first constant multiplications gets optimized away if the delay is
- * a constant)
- */
-static inline void udelay(unsigned long usecs)
-{
-	extern unsigned long loops_per_jiffy;
-	__delay(usecs * loops_per_jiffy / (1000000 / HZ));
-}
-
-#endif
diff --git a/include/asm-blackfin/dma.h b/include/asm-blackfin/dma.h
deleted file mode 100644
index c0d5259e315b..000000000000
--- a/include/asm-blackfin/dma.h
+++ /dev/null
@@ -1,197 +0,0 @@
-/*
- * File:         include/asm-blackfin/simple_bf533_dma.h
- * Based on:     none - original work
- * Author:       LG Soft India
- *               Copyright (C) 2004-2005 Analog Devices Inc.
- * Created:      Tue Sep 21 2004
- * Description:  This file contains the major Data structures and constants
- * 		 used for DMA Implementation in BF533
- * Modified:
- *
- * Bugs:         Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2, or (at your option)
- * any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; see the file COPYING.
- * If not, write to the Free Software Foundation,
- * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
- */
-
-#ifndef _BLACKFIN_DMA_H_
-#define _BLACKFIN_DMA_H_
-
-#include <asm/io.h>
-#include <linux/slab.h>
-#include <asm/irq.h>
-#include <asm/signal.h>
-
-#include <linux/kernel.h>
-#include <asm/mach/dma.h>
-#include <linux/mm.h>
-#include <linux/interrupt.h>
-#include <asm/blackfin.h>
-
-#define MAX_DMA_ADDRESS PAGE_OFFSET
-
-/*****************************************************************************
-*        Generic DMA  Declarations
-*
-****************************************************************************/
-enum dma_chan_status {
-	DMA_CHANNEL_FREE,
-	DMA_CHANNEL_REQUESTED,
-	DMA_CHANNEL_ENABLED,
-};
-
-/*-------------------------
- * config reg bits value
- *-------------------------*/
-#define DATA_SIZE_8 		0
-#define DATA_SIZE_16 		1
-#define DATA_SIZE_32 		2
-
-#define DMA_FLOW_STOP 		0
-#define DMA_FLOW_AUTO 		1
-#define DMA_FLOW_ARRAY 		4
-#define DMA_FLOW_SMALL 		6
-#define DMA_FLOW_LARGE 		7
-
-#define DIMENSION_LINEAR    0
-#define DIMENSION_2D           1
-
-#define DIR_READ     0
-#define DIR_WRITE    1
-
-#define INTR_DISABLE   0
-#define INTR_ON_BUF    2
-#define INTR_ON_ROW    3
-
-#define DMA_NOSYNC_KEEP_DMA_BUF	0
-#define DMA_SYNC_RESTART	1
-
-struct dmasg {
-	unsigned long next_desc_addr;
-	unsigned long start_addr;
-	unsigned short cfg;
-	unsigned short x_count;
-	short x_modify;
-	unsigned short y_count;
-	short y_modify;
-} __attribute__((packed));
-
-struct dma_register {
-	unsigned long next_desc_ptr;	/* DMA Next Descriptor Pointer register */
-	unsigned long start_addr;	/* DMA Start address  register */
-
-	unsigned short cfg;	/* DMA Configuration register */
-	unsigned short dummy1;	/* DMA Configuration register */
-
-	unsigned long reserved;
-
-	unsigned short x_count;	/* DMA x_count register */
-	unsigned short dummy2;
-
-	short x_modify;	/* DMA x_modify register */
-	unsigned short dummy3;
-
-	unsigned short y_count;	/* DMA y_count register */
-	unsigned short dummy4;
-
-	short y_modify;	/* DMA y_modify register */
-	unsigned short dummy5;
-
-	unsigned long curr_desc_ptr;	/* DMA Current Descriptor Pointer
-					   register */
-	unsigned long curr_addr_ptr;	/* DMA Current Address Pointer
-						   register */
-	unsigned short irq_status;	/* DMA irq status register */
-	unsigned short dummy6;
-
-	unsigned short peripheral_map;	/* DMA peripheral map register */
-	unsigned short dummy7;
-
-	unsigned short curr_x_count;	/* DMA Current x-count register */
-	unsigned short dummy8;
-
-	unsigned long reserved2;
-
-	unsigned short curr_y_count;	/* DMA Current y-count register */
-	unsigned short dummy9;
-
-	unsigned long reserved3;
-
-};
-
-typedef irqreturn_t(*dma_interrupt_t) (int irq, void *dev_id);
-
-struct dma_channel {
-	struct mutex dmalock;
-	char *device_id;
-	enum dma_chan_status chan_status;
-	struct dma_register *regs;
-	struct dmasg *sg;		/* large mode descriptor */
-	unsigned int ctrl_num;	/* controller number */
-	dma_interrupt_t irq_callback;
-	void *data;
-	unsigned int dma_enable_flag;
-	unsigned int loopback_flag;
-};
-
-/*******************************************************************************
-*	DMA API's
-*******************************************************************************/
-/* functions to set register mode */
-void set_dma_start_addr(unsigned int channel, unsigned long addr);
-void set_dma_next_desc_addr(unsigned int channel, unsigned long addr);
-void set_dma_curr_desc_addr(unsigned int channel, unsigned long addr);
-void set_dma_x_count(unsigned int channel, unsigned short x_count);
-void set_dma_x_modify(unsigned int channel, short x_modify);
-void set_dma_y_count(unsigned int channel, unsigned short y_count);
-void set_dma_y_modify(unsigned int channel, short y_modify);
-void set_dma_config(unsigned int channel, unsigned short config);
-unsigned short set_bfin_dma_config(char direction, char flow_mode,
-				   char intr_mode, char dma_mode, char width,
-				   char syncmode);
-void set_dma_curr_addr(unsigned int channel, unsigned long addr);
-
-/* get curr status for polling */
-unsigned short get_dma_curr_irqstat(unsigned int channel);
-unsigned short get_dma_curr_xcount(unsigned int channel);
-unsigned short get_dma_curr_ycount(unsigned int channel);
-unsigned long get_dma_next_desc_ptr(unsigned int channel);
-unsigned long get_dma_curr_desc_ptr(unsigned int channel);
-unsigned long get_dma_curr_addr(unsigned int channel);
-
-/* set large DMA mode descriptor */
-void set_dma_sg(unsigned int channel, struct dmasg *sg, int nr_sg);
-
-/* check if current channel is in use */
-int dma_channel_active(unsigned int channel);
-
-/* common functions must be called in any mode */
-void free_dma(unsigned int channel);
-int dma_channel_active(unsigned int channel); /* check if a channel is in use */
-void disable_dma(unsigned int channel);
-void enable_dma(unsigned int channel);
-int request_dma(unsigned int channel, char *device_id);
-int set_dma_callback(unsigned int channel, dma_interrupt_t callback,
-		     void *data);
-void dma_disable_irq(unsigned int channel);
-void dma_enable_irq(unsigned int channel);
-void clear_dma_irqstat(unsigned int channel);
-void *dma_memcpy(void *dest, const void *src, size_t count);
-void *safe_dma_memcpy(void *dest, const void *src, size_t count);
-
-extern int channel2irq(unsigned int channel);
-extern struct dma_register *dma_io_base_addr[MAX_BLACKFIN_DMA_CHANNEL];
-
-#endif
diff --git a/include/asm-blackfin/dpmc.h b/include/asm-blackfin/dpmc.h
deleted file mode 100644
index 7f34cd384f12..000000000000
--- a/include/asm-blackfin/dpmc.h
+++ /dev/null
@@ -1,78 +0,0 @@
-/*
- * include/asm-blackfin/dpmc.h -  Miscellaneous IOCTL commands for Dynamic Power
- *   			 	Management Controller Driver.
- * Copyright (C) 2004-2008 Analog Device Inc.
- *
- */
-#ifndef _BLACKFIN_DPMC_H_
-#define _BLACKFIN_DPMC_H_
-
-#define SLEEP_MODE		1
-#define DEEP_SLEEP_MODE		2
-#define ACTIVE_PLL_DISABLED	3
-#define FULLON_MODE		4
-#define ACTIVE_PLL_ENABLED	5
-#define HIBERNATE_MODE		6
-
-#define IOCTL_FULL_ON_MODE	_IO('s', 0xA0)
-#define IOCTL_ACTIVE_MODE	_IO('s', 0xA1)
-#define IOCTL_SLEEP_MODE	_IO('s', 0xA2)
-#define IOCTL_DEEP_SLEEP_MODE	_IO('s', 0xA3)
-#define IOCTL_HIBERNATE_MODE	_IO('s', 0xA4)
-#define IOCTL_CHANGE_FREQUENCY	_IOW('s', 0xA5, unsigned long)
-#define IOCTL_CHANGE_VOLTAGE	_IOW('s', 0xA6, unsigned long)
-#define IOCTL_SET_CCLK		_IOW('s', 0xA7, unsigned long)
-#define IOCTL_SET_SCLK		_IOW('s', 0xA8, unsigned long)
-#define IOCTL_GET_PLLSTATUS	_IOW('s', 0xA9, unsigned long)
-#define IOCTL_GET_CORECLOCK	_IOW('s', 0xAA, unsigned long)
-#define IOCTL_GET_SYSTEMCLOCK	_IOW('s', 0xAB, unsigned long)
-#define IOCTL_GET_VCO		_IOW('s', 0xAC, unsigned long)
-#define IOCTL_DISABLE_WDOG_TIMER _IO('s', 0xAD)
-#define IOCTL_UNMASK_WDOG_WAKEUP_EVENT _IO('s',0xAE)
-#define IOCTL_PROGRAM_WDOG_TIMER _IOW('s',0xAF,unsigned long)
-#define IOCTL_CLEAR_WDOG_WAKEUP_EVENT _IO('s',0xB0)
-#define IOCTL_SLEEP_DEEPER_MODE _IO('s',0xB1)
-
-#define DPMC_MINOR		254
-
-#define ON	0
-#define OFF	1
-
-#ifdef __KERNEL__
-
-unsigned long calc_volt(void);
-int calc_vlev(int vlt);
-unsigned long change_voltage(unsigned long volt);
-int calc_msel(int vco_hz);
-unsigned long change_frequency(unsigned long vco_mhz);
-int set_pll_div(unsigned short sel, unsigned char flag);
-int get_vco(void);
-unsigned long change_system_clock(unsigned long clock);
-unsigned long change_core_clock(unsigned long clock);
-unsigned long get_pll_status(void);
-void change_baud(int baud);
-void fullon_mode(void);
-void active_mode(void);
-void sleep_mode(u32 sic_iwr0, u32 sic_iwr1, u32 sic_iwr2);
-void deep_sleep(u32 sic_iwr0, u32 sic_iwr1, u32 sic_iwr2);
-void hibernate_mode(u32 sic_iwr0, u32 sic_iwr1, u32 sic_iwr2);
-void sleep_deeper(u32 sic_iwr0, u32 sic_iwr1, u32 sic_iwr2);
-void program_wdog_timer(unsigned long);
-void unmask_wdog_wakeup_evt(void);
-void clear_wdog_wakeup_evt(void);
-void disable_wdog_timer(void);
-
-extern unsigned long get_cclk(void);
-extern unsigned long get_sclk(void);
-
-struct bfin_dpmc_platform_data {
-	const unsigned int *tuple_tab;
-	unsigned short tabsize;
-	unsigned short vr_settling_time; /* in us */
-};
-
-#define VRPAIR(vlev, freq) (((vlev) << 16) | ((freq) >> 16))
-
-#endif	/* __KERNEL__ */
-
-#endif	/*_BLACKFIN_DPMC_H_*/
diff --git a/include/asm-blackfin/elf.h b/include/asm-blackfin/elf.h
deleted file mode 100644
index 30303fc8292c..000000000000
--- a/include/asm-blackfin/elf.h
+++ /dev/null
@@ -1,125 +0,0 @@
-/* Changes made by  LG Soft Oct 2004*/
-
-#ifndef __ASMBFIN_ELF_H
-#define __ASMBFIN_ELF_H
-
-/*
- * ELF register definitions..
- */
-
-#include <asm/ptrace.h>
-#include <asm/user.h>
-
-/* Processor specific flags for the ELF header e_flags field.  */
-#define EF_BFIN_PIC		0x00000001	/* -fpic */
-#define EF_BFIN_FDPIC		0x00000002	/* -mfdpic */
-#define EF_BFIN_CODE_IN_L1	0x00000010	/* --code-in-l1 */
-#define EF_BFIN_DATA_IN_L1	0x00000020	/* --data-in-l1 */
-
-typedef unsigned long elf_greg_t;
-
-#define ELF_NGREG (sizeof(struct user_regs_struct) / sizeof(elf_greg_t))
-typedef elf_greg_t elf_gregset_t[ELF_NGREG];
-
-typedef struct user_bfinfp_struct elf_fpregset_t;
-/*
- * This is used to ensure we don't load something for the wrong architecture.
- */
-#define elf_check_arch(x) ((x)->e_machine == EM_BLACKFIN)
-
-#define elf_check_fdpic(x) ((x)->e_flags & EF_BFIN_FDPIC /* && !((x)->e_flags & EF_FRV_NON_PIC_RELOCS) */)
-#define elf_check_const_displacement(x) ((x)->e_flags & EF_BFIN_PIC)
-
-/* EM_BLACKFIN defined in linux/elf.h	*/
-
-/*
- * These are used to set parameters in the core dumps.
- */
-#define ELF_CLASS	ELFCLASS32
-#define ELF_DATA	ELFDATA2LSB
-#define ELF_ARCH	EM_BLACKFIN
-
-#define ELF_PLAT_INIT(_r)	_r->p1 = 0
-
-#define ELF_FDPIC_PLAT_INIT(_regs, _exec_map_addr, _interp_map_addr, _dynamic_addr)	\
-do {											\
-	_regs->r7	= 0;						\
-	_regs->p0	= _exec_map_addr;				\
-	_regs->p1	= _interp_map_addr;				\
-	_regs->p2	= _dynamic_addr;				\
-} while(0)
-
-#define USE_ELF_CORE_DUMP
-#define ELF_FDPIC_CORE_EFLAGS	EF_BFIN_FDPIC
-#define ELF_EXEC_PAGESIZE	4096
-
-#define	R_unused0	0	/* relocation type 0 is not defined */
-#define R_pcrel5m2	1	/*LSETUP part a */
-#define R_unused1	2	/* relocation type 2 is not defined */
-#define R_pcrel10	3	/* type 3, if cc jump <target>  */
-#define R_pcrel12_jump	4	/* type 4, jump <target> */
-#define R_rimm16	5	/* type 0x5, rN = <target> */
-#define R_luimm16	6	/* # 0x6, preg.l=<target> Load imm 16 to lower half */
-#define R_huimm16  	7	/* # 0x7, preg.h=<target> Load imm 16 to upper half */
-#define R_pcrel12_jump_s 8	/* # 0x8 jump.s <target> */
-#define R_pcrel24_jump_x 9	/* # 0x9 jump.x <target> */
-#define R_pcrel24       10	/* # 0xa call <target> , not expandable */
-#define R_unusedb       11	/* # 0xb not generated */
-#define R_unusedc       12	/* # 0xc  not used */
-#define R_pcrel24_jump_l 13	/*0xd jump.l <target> */
-#define R_pcrel24_call_x 14	/* 0xE, call.x <target> if <target> is above 24 bit limit call through P1 */
-#define R_var_eq_symb    15	/* 0xf, linker should treat it same as 0x12 */
-#define R_byte_data      16	/* 0x10, .byte var = symbol */
-#define R_byte2_data     17	/* 0x11, .byte2 var = symbol */
-#define R_byte4_data     18	/* 0x12, .byte4 var = symbol and .var var=symbol */
-#define R_pcrel11        19	/* 0x13, lsetup part b */
-#define R_unused14      20	/* 0x14, undefined */
-#define R_unused15       21	/* not generated by VDSP 3.5 */
-
-/* arithmetic relocations */
-#define R_push		 0xE0
-#define R_const		 0xE1
-#define R_add		 0xE2
-#define R_sub		 0xE3
-#define R_mult		 0xE4
-#define R_div		 0xE5
-#define R_mod		 0xE6
-#define R_lshift	 0xE7
-#define R_rshift	 0xE8
-#define R_and		 0xE9
-#define R_or		 0xEA
-#define R_xor		 0xEB
-#define R_land		 0xEC
-#define R_lor		 0xED
-#define R_len		 0xEE
-#define R_neg		 0xEF
-#define R_comp		 0xF0
-#define R_page		 0xF1
-#define R_hwpage	 0xF2
-#define R_addr		 0xF3
-
-/* This is the location that an ET_DYN program is loaded if exec'ed.  Typical
-   use of this is to invoke "./ld.so someprog" to test out a new version of
-   the loader.  We need to make sure that it is out of the way of the program
-   that it will "exec", and that there is sufficient room for the brk.  */
-
-#define ELF_ET_DYN_BASE         0xD0000000UL
-
-#define ELF_CORE_COPY_REGS(pr_reg, regs)	\
-        memcpy((char *) &pr_reg, (char *)regs,  \
-               sizeof(struct pt_regs));
-
-/* This yields a mask that user programs can use to figure out what
-   instruction set this cpu supports.  */
-
-#define ELF_HWCAP	(0)
-
-/* This yields a string that ld.so will use to load implementation
-   specific libraries for optimization.  This is more specific in
-   intent than poking at uname or /proc/cpuinfo.  */
-
-#define ELF_PLATFORM  (NULL)
-
-#define SET_PERSONALITY(ex, ibcs2) set_personality((ibcs2)?PER_SVR4:PER_LINUX)
-
-#endif
diff --git a/include/asm-blackfin/fixed_code.h b/include/asm-blackfin/fixed_code.h
deleted file mode 100644
index 37db66c7030d..000000000000
--- a/include/asm-blackfin/fixed_code.h
+++ /dev/null
@@ -1,22 +0,0 @@
-/* This file defines the fixed addresses where userspace programs can find
-   atomic code sequences.  */
-
-#define FIXED_CODE_START	0x400
-
-#define SIGRETURN_STUB		0x400
-
-#define ATOMIC_SEQS_START	0x410
-
-#define ATOMIC_XCHG32		0x410
-#define ATOMIC_CAS32		0x420
-#define ATOMIC_ADD32		0x430
-#define ATOMIC_SUB32		0x440
-#define ATOMIC_IOR32		0x450
-#define ATOMIC_AND32		0x460
-#define ATOMIC_XOR32		0x470
-
-#define ATOMIC_SEQS_END		0x480
-
-#define SAFE_USER_INSTRUCTION   0x480
-
-#define FIXED_CODE_END		0x490
diff --git a/include/asm-blackfin/gpio.h b/include/asm-blackfin/gpio.h
deleted file mode 100644
index ff95e9d88342..000000000000
--- a/include/asm-blackfin/gpio.h
+++ /dev/null
@@ -1,461 +0,0 @@
-/*
- * File:         arch/blackfin/kernel/bfin_gpio.h
- * Based on:
- * Author:	 Michael Hennerich (hennerich@blackfin.uclinux.org)
- *
- * Created:
- * Description:
- *
- * Modified:
- *               Copyright 2004-2008 Analog Devices Inc.
- *
- * Bugs:         Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, see the file COPYING, or write
- * to the Free Software Foundation, Inc.,
- * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
- */
-
-/*
-*  Number     BF537/6/4    BF561    BF533/2/1
-*             BF527/5/2
-*
-*  GPIO_0       PF0         PF0        PF0
-*  GPIO_1       PF1         PF1        PF1
-*  GPIO_2       PF2         PF2        PF2
-*  GPIO_3       PF3         PF3        PF3
-*  GPIO_4       PF4         PF4        PF4
-*  GPIO_5       PF5         PF5        PF5
-*  GPIO_6       PF6         PF6        PF6
-*  GPIO_7       PF7         PF7        PF7
-*  GPIO_8       PF8         PF8        PF8
-*  GPIO_9       PF9         PF9        PF9
-*  GPIO_10      PF10        PF10       PF10
-*  GPIO_11      PF11        PF11       PF11
-*  GPIO_12      PF12        PF12       PF12
-*  GPIO_13      PF13        PF13       PF13
-*  GPIO_14      PF14        PF14       PF14
-*  GPIO_15      PF15        PF15       PF15
-*  GPIO_16      PG0         PF16
-*  GPIO_17      PG1         PF17
-*  GPIO_18      PG2         PF18
-*  GPIO_19      PG3         PF19
-*  GPIO_20      PG4         PF20
-*  GPIO_21      PG5         PF21
-*  GPIO_22      PG6         PF22
-*  GPIO_23      PG7         PF23
-*  GPIO_24      PG8         PF24
-*  GPIO_25      PG9         PF25
-*  GPIO_26      PG10        PF26
-*  GPIO_27      PG11        PF27
-*  GPIO_28      PG12        PF28
-*  GPIO_29      PG13        PF29
-*  GPIO_30      PG14        PF30
-*  GPIO_31      PG15        PF31
-*  GPIO_32      PH0         PF32
-*  GPIO_33      PH1         PF33
-*  GPIO_34      PH2         PF34
-*  GPIO_35      PH3         PF35
-*  GPIO_36      PH4         PF36
-*  GPIO_37      PH5         PF37
-*  GPIO_38      PH6         PF38
-*  GPIO_39      PH7         PF39
-*  GPIO_40      PH8         PF40
-*  GPIO_41      PH9         PF41
-*  GPIO_42      PH10        PF42
-*  GPIO_43      PH11        PF43
-*  GPIO_44      PH12        PF44
-*  GPIO_45      PH13        PF45
-*  GPIO_46      PH14        PF46
-*  GPIO_47      PH15        PF47
-*/
-
-#ifndef __ARCH_BLACKFIN_GPIO_H__
-#define __ARCH_BLACKFIN_GPIO_H__
-
-#define gpio_bank(x) ((x) >> 4)
-#define gpio_bit(x)  (1<<((x) & 0xF))
-#define gpio_sub_n(x) ((x) & 0xF)
-
-#define GPIO_BANKSIZE 16
-
-#define	GPIO_0	0
-#define	GPIO_1	1
-#define	GPIO_2	2
-#define	GPIO_3	3
-#define	GPIO_4	4
-#define	GPIO_5	5
-#define	GPIO_6	6
-#define	GPIO_7	7
-#define	GPIO_8	8
-#define	GPIO_9	9
-#define	GPIO_10	10
-#define	GPIO_11	11
-#define	GPIO_12	12
-#define	GPIO_13	13
-#define	GPIO_14	14
-#define	GPIO_15	15
-#define	GPIO_16	16
-#define	GPIO_17	17
-#define	GPIO_18	18
-#define	GPIO_19	19
-#define	GPIO_20	20
-#define	GPIO_21	21
-#define	GPIO_22	22
-#define	GPIO_23	23
-#define	GPIO_24	24
-#define	GPIO_25	25
-#define	GPIO_26	26
-#define	GPIO_27	27
-#define	GPIO_28	28
-#define	GPIO_29	29
-#define	GPIO_30	30
-#define	GPIO_31	31
-#define	GPIO_32	32
-#define	GPIO_33	33
-#define	GPIO_34	34
-#define	GPIO_35	35
-#define	GPIO_36	36
-#define	GPIO_37	37
-#define	GPIO_38	38
-#define	GPIO_39	39
-#define	GPIO_40	40
-#define	GPIO_41	41
-#define	GPIO_42	42
-#define	GPIO_43	43
-#define	GPIO_44	44
-#define	GPIO_45	45
-#define	GPIO_46	46
-#define	GPIO_47	47
-
-
-#define PERIPHERAL_USAGE 1
-#define GPIO_USAGE 0
-
-#ifdef BF533_FAMILY
-#define MAX_BLACKFIN_GPIOS 16
-
-#define	GPIO_PF0	0
-#define	GPIO_PF1	1
-#define	GPIO_PF2	2
-#define	GPIO_PF3	3
-#define	GPIO_PF4	4
-#define	GPIO_PF5	5
-#define	GPIO_PF6	6
-#define	GPIO_PF7	7
-#define	GPIO_PF8	8
-#define	GPIO_PF9	9
-#define	GPIO_PF10	10
-#define	GPIO_PF11	11
-#define	GPIO_PF12	12
-#define	GPIO_PF13	13
-#define	GPIO_PF14	14
-#define	GPIO_PF15	15
-
-#endif
-
-#if defined(BF527_FAMILY) || defined(BF537_FAMILY)
-#define MAX_BLACKFIN_GPIOS 48
-
-#define	GPIO_PF0	0
-#define	GPIO_PF1	1
-#define	GPIO_PF2	2
-#define	GPIO_PF3	3
-#define	GPIO_PF4	4
-#define	GPIO_PF5	5
-#define	GPIO_PF6	6
-#define	GPIO_PF7	7
-#define	GPIO_PF8	8
-#define	GPIO_PF9	9
-#define	GPIO_PF10	10
-#define	GPIO_PF11	11
-#define	GPIO_PF12	12
-#define	GPIO_PF13	13
-#define	GPIO_PF14	14
-#define	GPIO_PF15	15
-#define	GPIO_PG0	16
-#define	GPIO_PG1	17
-#define	GPIO_PG2	18
-#define	GPIO_PG3	19
-#define	GPIO_PG4	20
-#define	GPIO_PG5	21
-#define	GPIO_PG6	22
-#define	GPIO_PG7	23
-#define	GPIO_PG8	24
-#define	GPIO_PG9	25
-#define	GPIO_PG10      	26
-#define	GPIO_PG11      	27
-#define	GPIO_PG12      	28
-#define	GPIO_PG13      	29
-#define	GPIO_PG14      	30
-#define	GPIO_PG15      	31
-#define	GPIO_PH0	32
-#define	GPIO_PH1	33
-#define	GPIO_PH2	34
-#define	GPIO_PH3	35
-#define	GPIO_PH4	36
-#define	GPIO_PH5	37
-#define	GPIO_PH6	38
-#define	GPIO_PH7	39
-#define	GPIO_PH8	40
-#define	GPIO_PH9	41
-#define	GPIO_PH10      	42
-#define	GPIO_PH11      	43
-#define	GPIO_PH12      	44
-#define	GPIO_PH13      	45
-#define	GPIO_PH14      	46
-#define	GPIO_PH15      	47
-
-#define PORT_F GPIO_PF0
-#define PORT_G GPIO_PG0
-#define PORT_H GPIO_PH0
-
-#endif
-
-#ifdef BF548_FAMILY
-#include <asm-blackfin/mach-bf548/gpio.h>
-#endif
-
-#ifdef BF561_FAMILY
-#define MAX_BLACKFIN_GPIOS 48
-
-#define	GPIO_PF0	0
-#define	GPIO_PF1	1
-#define	GPIO_PF2	2
-#define	GPIO_PF3	3
-#define	GPIO_PF4	4
-#define	GPIO_PF5	5
-#define	GPIO_PF6	6
-#define	GPIO_PF7	7
-#define	GPIO_PF8	8
-#define	GPIO_PF9	9
-#define	GPIO_PF10	10
-#define	GPIO_PF11	11
-#define	GPIO_PF12	12
-#define	GPIO_PF13	13
-#define	GPIO_PF14	14
-#define	GPIO_PF15	15
-#define	GPIO_PF16	16
-#define	GPIO_PF17	17
-#define	GPIO_PF18	18
-#define	GPIO_PF19	19
-#define	GPIO_PF20	20
-#define	GPIO_PF21	21
-#define	GPIO_PF22	22
-#define	GPIO_PF23	23
-#define	GPIO_PF24	24
-#define	GPIO_PF25	25
-#define	GPIO_PF26	26
-#define	GPIO_PF27	27
-#define	GPIO_PF28	28
-#define	GPIO_PF29	29
-#define	GPIO_PF30	30
-#define	GPIO_PF31	31
-#define	GPIO_PF32	32
-#define	GPIO_PF33	33
-#define	GPIO_PF34	34
-#define	GPIO_PF35	35
-#define	GPIO_PF36	36
-#define	GPIO_PF37	37
-#define	GPIO_PF38	38
-#define	GPIO_PF39	39
-#define	GPIO_PF40	40
-#define	GPIO_PF41	41
-#define	GPIO_PF42	42
-#define	GPIO_PF43	43
-#define	GPIO_PF44	44
-#define	GPIO_PF45	45
-#define	GPIO_PF46	46
-#define	GPIO_PF47	47
-
-#define PORT_FIO0 GPIO_0
-#define PORT_FIO1 GPIO_16
-#define PORT_FIO2 GPIO_32
-#endif
-
-#ifndef __ASSEMBLY__
-
-/***********************************************************
-*
-* FUNCTIONS: Blackfin General Purpose Ports Access Functions
-*
-* INPUTS/OUTPUTS:
-* gpio - GPIO Number between 0 and MAX_BLACKFIN_GPIOS
-*
-*
-* DESCRIPTION: These functions abstract direct register access
-*              to Blackfin processor General Purpose
-*              Ports Regsiters
-*
-* CAUTION: These functions do not belong to the GPIO Driver API
-*************************************************************
-* MODIFICATION HISTORY :
-**************************************************************/
-
-#ifndef BF548_FAMILY
-void set_gpio_dir(unsigned, unsigned short);
-void set_gpio_inen(unsigned, unsigned short);
-void set_gpio_polar(unsigned, unsigned short);
-void set_gpio_edge(unsigned, unsigned short);
-void set_gpio_both(unsigned, unsigned short);
-void set_gpio_data(unsigned, unsigned short);
-void set_gpio_maska(unsigned, unsigned short);
-void set_gpio_maskb(unsigned, unsigned short);
-void set_gpio_toggle(unsigned);
-void set_gpiop_dir(unsigned, unsigned short);
-void set_gpiop_inen(unsigned, unsigned short);
-void set_gpiop_polar(unsigned, unsigned short);
-void set_gpiop_edge(unsigned, unsigned short);
-void set_gpiop_both(unsigned, unsigned short);
-void set_gpiop_data(unsigned, unsigned short);
-void set_gpiop_maska(unsigned, unsigned short);
-void set_gpiop_maskb(unsigned, unsigned short);
-unsigned short get_gpio_dir(unsigned);
-unsigned short get_gpio_inen(unsigned);
-unsigned short get_gpio_polar(unsigned);
-unsigned short get_gpio_edge(unsigned);
-unsigned short get_gpio_both(unsigned);
-unsigned short get_gpio_maska(unsigned);
-unsigned short get_gpio_maskb(unsigned);
-unsigned short get_gpio_data(unsigned);
-unsigned short get_gpiop_dir(unsigned);
-unsigned short get_gpiop_inen(unsigned);
-unsigned short get_gpiop_polar(unsigned);
-unsigned short get_gpiop_edge(unsigned);
-unsigned short get_gpiop_both(unsigned);
-unsigned short get_gpiop_maska(unsigned);
-unsigned short get_gpiop_maskb(unsigned);
-unsigned short get_gpiop_data(unsigned);
-
-struct gpio_port_t {
-	unsigned short data;
-	unsigned short dummy1;
-	unsigned short data_clear;
-	unsigned short dummy2;
-	unsigned short data_set;
-	unsigned short dummy3;
-	unsigned short toggle;
-	unsigned short dummy4;
-	unsigned short maska;
-	unsigned short dummy5;
-	unsigned short maska_clear;
-	unsigned short dummy6;
-	unsigned short maska_set;
-	unsigned short dummy7;
-	unsigned short maska_toggle;
-	unsigned short dummy8;
-	unsigned short maskb;
-	unsigned short dummy9;
-	unsigned short maskb_clear;
-	unsigned short dummy10;
-	unsigned short maskb_set;
-	unsigned short dummy11;
-	unsigned short maskb_toggle;
-	unsigned short dummy12;
-	unsigned short dir;
-	unsigned short dummy13;
-	unsigned short polar;
-	unsigned short dummy14;
-	unsigned short edge;
-	unsigned short dummy15;
-	unsigned short both;
-	unsigned short dummy16;
-	unsigned short inen;
-};
-#endif
-
-#ifdef CONFIG_PM
-unsigned int bfin_pm_setup(void);
-void bfin_pm_restore(void);
-
-#ifndef CONFIG_BF54x
-#define PM_WAKE_RISING	0x1
-#define PM_WAKE_FALLING	0x2
-#define PM_WAKE_HIGH	0x4
-#define PM_WAKE_LOW	0x8
-#define PM_WAKE_BOTH_EDGES	(PM_WAKE_RISING | PM_WAKE_FALLING)
-#define PM_WAKE_IGNORE	0xF0
-
-int gpio_pm_wakeup_request(unsigned gpio, unsigned char type);
-void gpio_pm_wakeup_free(unsigned gpio);
-
-struct gpio_port_s {
-	unsigned short data;
-	unsigned short data_clear;
-	unsigned short data_set;
-	unsigned short toggle;
-	unsigned short maska;
-	unsigned short maska_clear;
-	unsigned short maska_set;
-	unsigned short maska_toggle;
-	unsigned short maskb;
-	unsigned short maskb_clear;
-	unsigned short maskb_set;
-	unsigned short maskb_toggle;
-	unsigned short dir;
-	unsigned short polar;
-	unsigned short edge;
-	unsigned short both;
-	unsigned short inen;
-
-	unsigned short fer;
-	unsigned short reserved;
-};
-#endif /*CONFIG_BF54x*/
-#endif /*CONFIG_PM*/
-
-/***********************************************************
-*
-* FUNCTIONS: Blackfin GPIO Driver
-*
-* INPUTS/OUTPUTS:
-* gpio - GPIO Number between 0 and MAX_BLACKFIN_GPIOS
-*
-*
-* DESCRIPTION: Blackfin GPIO Driver API
-*
-* CAUTION:
-*************************************************************
-* MODIFICATION HISTORY :
-**************************************************************/
-
-int gpio_request(unsigned, const char *);
-void gpio_free(unsigned);
-
-void gpio_set_value(unsigned gpio, int arg);
-int gpio_get_value(unsigned gpio);
-
-#ifndef BF548_FAMILY
-#define gpio_set_value(gpio, value)	set_gpio_data(gpio, value)
-#endif
-
-int gpio_direction_input(unsigned gpio);
-int gpio_direction_output(unsigned gpio, int value);
-
-#include <asm-generic/gpio.h>		/* cansleep wrappers */
-#include <asm/irq.h>
-
-static inline int gpio_to_irq(unsigned gpio)
-{
-	return (gpio + GPIO_IRQ_BASE);
-}
-
-static inline int irq_to_gpio(unsigned irq)
-{
-	return (irq - GPIO_IRQ_BASE);
-}
-
-#endif /* __ASSEMBLY__ */
-
-#endif /* __ARCH_BLACKFIN_GPIO_H__ */
diff --git a/include/asm-blackfin/irq.h b/include/asm-blackfin/irq.h
deleted file mode 100644
index 86b67834354d..000000000000
--- a/include/asm-blackfin/irq.h
+++ /dev/null
@@ -1,72 +0,0 @@
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file COPYING in the main directory of this archive
- * for more details.
- *
- * Changed by HuTao Apr18, 2003
- *
- * Copyright was missing when I got the code so took from MIPS arch ...MaTed---
- * Copyright (C) 1994 by Waldorf GMBH, written by Ralf Baechle
- * Copyright (C) 1995, 96, 97, 98, 99, 2000, 2001 by Ralf Baechle
- *
- * Adapted for BlackFin (ADI) by Ted Ma <mated@sympatico.ca>
- * Copyright (c) 2002 Arcturus Networks Inc. (www.arcturusnetworks.com)
- * Copyright (c) 2002 Lineo, Inc. <mattw@lineo.com>
- */
-
-#ifndef _BFIN_IRQ_H_
-#define _BFIN_IRQ_H_
-
-#include <asm/mach/irq.h>
-#include <asm/ptrace.h>
-
-/*******************************************************************************
- *****   INTRODUCTION ***********
- *   On the Blackfin, the interrupt structure allows remmapping of the hardware
- *   levels.
- * - I'm going to assume that the H/W level is going to stay at the default
- *   settings. If someone wants to go through and abstart this out, feel free
- *   to mod the interrupt numbering scheme.
- * - I'm abstracting the interrupts so that uClinux does not know anything
- *   about the H/W levels. If you want to change the H/W AND keep the abstracted
- *   levels that uClinux sees, you should be able to do most of it here.
- * - I've left the "abstract" numbering sparce in case someone wants to pull the
- *   interrupts apart (just the TX/RX for the various devices)
- *******************************************************************************/
-
-/* SYS_IRQS and NR_IRQS are defined in <asm/mach-bf5xx/irq.h>*/
-
-/*
- * Machine specific interrupt sources.
- *
- * Adding an interrupt service routine for a source with this bit
- * set indicates a special machine specific interrupt source.
- * The machine specific files define these sources.
- *
- * The IRQ_MACHSPEC bit is now gone - the only thing it did was to
- * introduce unnecessary overhead.
- *
- * All interrupt handling is actually machine specific so it is better
- * to use function pointers, as used by the Sparc port, and select the
- * interrupt handling functions when initializing the kernel. This way
- * we save some unnecessary overhead at run-time.
- *                                                      01/11/97 - Jes
- */
-
-extern void ack_bad_irq(unsigned int irq);
-
-static __inline__ int irq_canonicalize(int irq)
-{
-	return irq;
-}
-
-/* count of spurious interrupts */
-/* extern volatile unsigned int num_spurious; */
-
-#ifndef NO_IRQ
-#define NO_IRQ ((unsigned int)(-1))
-#endif
-
-#define SIC_SYSIRQ(irq)	(irq - (IRQ_CORETMR + 1))
-
-#endif				/* _BFIN_IRQ_H_ */
diff --git a/include/asm-blackfin/kvm.h b/include/asm-blackfin/kvm.h
deleted file mode 100644
index e3477d77c014..000000000000
--- a/include/asm-blackfin/kvm.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef __LINUX_KVM_BLACKFIN_H
-#define __LINUX_KVM_BLACKFIN_H
-
-/* blackfin does not support KVM */
-
-#endif
diff --git a/include/asm-blackfin/mach-bf527/bfin_sir.h b/include/asm-blackfin/mach-bf527/bfin_sir.h
deleted file mode 100644
index 0612d0c9501c..000000000000
--- a/include/asm-blackfin/mach-bf527/bfin_sir.h
+++ /dev/null
@@ -1,133 +0,0 @@
-/*
- * Blackfin Infra-red Driver
- *
- * Copyright 2006-2008 Analog Devices Inc.
- *
- * Enter bugs at http://blackfin.uclinux.org/
- *
- * Licensed under the GPL-2 or later.
- *
- */
-
-#include <linux/serial.h>
-#include <asm/dma.h>
-#include <asm/portmux.h>
-
-#define SIR_UART_GET_CHAR(port)   bfin_read16((port)->membase + OFFSET_RBR)
-#define SIR_UART_GET_DLL(port)    bfin_read16((port)->membase + OFFSET_DLL)
-#define SIR_UART_GET_IER(port)    bfin_read16((port)->membase + OFFSET_IER)
-#define SIR_UART_GET_DLH(port)    bfin_read16((port)->membase + OFFSET_DLH)
-#define SIR_UART_GET_IIR(port)    bfin_read16((port)->membase + OFFSET_IIR)
-#define SIR_UART_GET_LCR(port)    bfin_read16((port)->membase + OFFSET_LCR)
-#define SIR_UART_GET_GCTL(port)   bfin_read16((port)->membase + OFFSET_GCTL)
-
-#define SIR_UART_PUT_CHAR(port, v) bfin_write16(((port)->membase + OFFSET_THR), v)
-#define SIR_UART_PUT_DLL(port, v)  bfin_write16(((port)->membase + OFFSET_DLL), v)
-#define SIR_UART_PUT_IER(port, v)  bfin_write16(((port)->membase + OFFSET_IER), v)
-#define SIR_UART_PUT_DLH(port, v)  bfin_write16(((port)->membase + OFFSET_DLH), v)
-#define SIR_UART_PUT_LCR(port, v)  bfin_write16(((port)->membase + OFFSET_LCR), v)
-#define SIR_UART_PUT_GCTL(port, v) bfin_write16(((port)->membase + OFFSET_GCTL), v)
-
-#ifdef CONFIG_SIR_BFIN_DMA
-struct dma_rx_buf {
-	char *buf;
-	int head;
-	int tail;
-	};
-#endif /* CONFIG_SIR_BFIN_DMA */
-
-struct bfin_sir_port {
-	unsigned char __iomem   *membase;
-	unsigned int            irq;
-	unsigned int            lsr;
-	unsigned long           clk;
-	struct net_device       *dev;
-#ifdef CONFIG_SIR_BFIN_DMA
-	int                     tx_done;
-	struct dma_rx_buf       rx_dma_buf;
-	struct timer_list       rx_dma_timer;
-	int                     rx_dma_nrows;
-#endif /* CONFIG_SIR_BFIN_DMA */
-	unsigned int            tx_dma_channel;
-	unsigned int            rx_dma_channel;
-};
-
-struct bfin_sir_port sir_ports[BFIN_UART_NR_PORTS];
-
-struct bfin_sir_port_res {
-	unsigned long   base_addr;
-	int             irq;
-	unsigned int    rx_dma_channel;
-	unsigned int    tx_dma_channel;
-};
-
-struct bfin_sir_port_res bfin_sir_port_resource[] = {
-#ifdef CONFIG_BFIN_SIR0
-	{
-	0xFFC00400,
-	IRQ_UART0_RX,
-	CH_UART0_RX,
-	CH_UART0_TX,
-	},
-#endif
-#ifdef CONFIG_BFIN_SIR1
-	{
-	0xFFC02000,
-	IRQ_UART1_RX,
-	CH_UART1_RX,
-	CH_UART1_TX,
-	},
-#endif
-};
-
-int nr_sirs = ARRAY_SIZE(bfin_sir_port_resource);
-
-struct bfin_sir_self {
-	struct bfin_sir_port    *sir_port;
-	spinlock_t              lock;
-	unsigned int            open;
-	int                     speed;
-	int                     newspeed;
-
-	struct sk_buff          *txskb;
-	struct sk_buff          *rxskb;
-	struct net_device_stats stats;
-	struct device           *dev;
-	struct irlap_cb         *irlap;
-	struct qos_info         qos;
-
-	iobuff_t                tx_buff;
-	iobuff_t                rx_buff;
-
-	struct work_struct      work;
-	int                     mtt;
-};
-
-static inline unsigned int SIR_UART_GET_LSR(struct bfin_sir_port *port)
-{
-	unsigned int lsr = bfin_read16(port->membase + OFFSET_LSR);
-	port->lsr |= (lsr & (BI|FE|PE|OE));
-	return lsr | port->lsr;
-}
-
-static inline void SIR_UART_CLEAR_LSR(struct bfin_sir_port *port)
-{
-	port->lsr = 0;
-	bfin_read16(port->membase + OFFSET_LSR);
-}
-
-#define DRIVER_NAME "bfin_sir"
-
-static void bfin_sir_hw_init(void)
-{
-#ifdef CONFIG_BFIN_SIR0
-	peripheral_request(P_UART0_TX, DRIVER_NAME);
-	peripheral_request(P_UART0_RX, DRIVER_NAME);
-#endif
-
-#ifdef CONFIG_BFIN_SIR1
-	peripheral_request(P_UART1_TX, DRIVER_NAME);
-	peripheral_request(P_UART1_RX, DRIVER_NAME);
-#endif
-	SSYNC();
-}
diff --git a/include/asm-blackfin/mach-bf527/mem_init.h b/include/asm-blackfin/mach-bf527/mem_init.h
deleted file mode 100644
index 008ca66719e2..000000000000
--- a/include/asm-blackfin/mach-bf527/mem_init.h
+++ /dev/null
@@ -1,337 +0,0 @@
-/*
- * File:         include/asm-blackfin/mach-bf527/mem_init.h
- * Based on:
- * Author:
- *
- * Created:
- * Description:
- *
- * Rev:
- *
- * Modified:
- *               Copyright 2004-2007 Analog Devices Inc.
- *
- * Bugs:         Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2, or (at your option)
- * any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; see the file COPYING.
- * If not, write to the Free Software Foundation,
- * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
- */
-
-#if (CONFIG_MEM_MT48LC16M16A2TG_75 || CONFIG_MEM_MT48LC64M4A2FB_7E || CONFIG_MEM_MT48LC16M8A2TG_75 || CONFIG_MEM_GENERIC_BOARD || CONFIG_MEM_MT48LC32M8A2_75 || CONFIG_MEM_MT48LC32M16A2TG_75)
-#if (CONFIG_SCLK_HZ > 119402985)
-#define SDRAM_tRP       TRP_2
-#define SDRAM_tRP_num   2
-#define SDRAM_tRAS      TRAS_7
-#define SDRAM_tRAS_num  7
-#define SDRAM_tRCD      TRCD_2
-#define SDRAM_tWR       TWR_2
-#endif
-#if (CONFIG_SCLK_HZ > 104477612) && (CONFIG_SCLK_HZ <= 119402985)
-#define SDRAM_tRP       TRP_2
-#define SDRAM_tRP_num   2
-#define SDRAM_tRAS      TRAS_6
-#define SDRAM_tRAS_num  6
-#define SDRAM_tRCD      TRCD_2
-#define SDRAM_tWR       TWR_2
-#endif
-#if (CONFIG_SCLK_HZ > 89552239) && (CONFIG_SCLK_HZ <= 104477612)
-#define SDRAM_tRP       TRP_2
-#define SDRAM_tRP_num   2
-#define SDRAM_tRAS      TRAS_5
-#define SDRAM_tRAS_num  5
-#define SDRAM_tRCD      TRCD_2
-#define SDRAM_tWR       TWR_2
-#endif
-#if (CONFIG_SCLK_HZ > 74626866) && (CONFIG_SCLK_HZ <= 89552239)
-#define SDRAM_tRP       TRP_2
-#define SDRAM_tRP_num   2
-#define SDRAM_tRAS      TRAS_4
-#define SDRAM_tRAS_num  4
-#define SDRAM_tRCD      TRCD_2
-#define SDRAM_tWR       TWR_2
-#endif
-#if (CONFIG_SCLK_HZ > 66666667) && (CONFIG_SCLK_HZ <= 74626866)
-#define SDRAM_tRP       TRP_2
-#define SDRAM_tRP_num   2
-#define SDRAM_tRAS      TRAS_3
-#define SDRAM_tRAS_num  3
-#define SDRAM_tRCD      TRCD_2
-#define SDRAM_tWR       TWR_2
-#endif
-#if (CONFIG_SCLK_HZ > 59701493) && (CONFIG_SCLK_HZ <= 66666667)
-#define SDRAM_tRP       TRP_1
-#define SDRAM_tRP_num   1
-#define SDRAM_tRAS      TRAS_4
-#define SDRAM_tRAS_num  3
-#define SDRAM_tRCD      TRCD_1
-#define SDRAM_tWR       TWR_2
-#endif
-#if (CONFIG_SCLK_HZ > 44776119) && (CONFIG_SCLK_HZ <= 59701493)
-#define SDRAM_tRP       TRP_1
-#define SDRAM_tRP_num   1
-#define SDRAM_tRAS      TRAS_3
-#define SDRAM_tRAS_num  3
-#define SDRAM_tRCD      TRCD_1
-#define SDRAM_tWR       TWR_2
-#endif
-#if (CONFIG_SCLK_HZ > 29850746) && (CONFIG_SCLK_HZ <= 44776119)
-#define SDRAM_tRP       TRP_1
-#define SDRAM_tRP_num   1
-#define SDRAM_tRAS      TRAS_2
-#define SDRAM_tRAS_num  2
-#define SDRAM_tRCD      TRCD_1
-#define SDRAM_tWR       TWR_2
-#endif
-#if (CONFIG_SCLK_HZ <= 29850746)
-#define SDRAM_tRP       TRP_1
-#define SDRAM_tRP_num   1
-#define SDRAM_tRAS      TRAS_1
-#define SDRAM_tRAS_num  1
-#define SDRAM_tRCD      TRCD_1
-#define SDRAM_tWR       TWR_2
-#endif
-#endif
-
-#if (CONFIG_MEM_MT48LC16M16A2TG_75)
-  /*SDRAM INFORMATION: */
-#define SDRAM_Tref  64		/* Refresh period in milliseconds   */
-#define SDRAM_NRA   8192	/* Number of row addresses in SDRAM */
-#define SDRAM_CL    CL_3
-#endif
-
-#if (CONFIG_MEM_MT48LC16M8A2TG_75)
-  /*SDRAM INFORMATION: */
-#define SDRAM_Tref  64		/* Refresh period in milliseconds   */
-#define SDRAM_NRA   4096	/* Number of row addresses in SDRAM */
-#define SDRAM_CL    CL_3
-#endif
-
-#if (CONFIG_MEM_MT48LC32M8A2_75)
-  /*SDRAM INFORMATION: */
-#define SDRAM_Tref  64		/* Refresh period in milliseconds   */
-#define SDRAM_NRA   8192	/* Number of row addresses in SDRAM */
-#define SDRAM_CL    CL_3
-#endif
-
-#if (CONFIG_MEM_MT48LC64M4A2FB_7E)
-  /*SDRAM INFORMATION: */
-#define SDRAM_Tref  64		/* Refresh period in milliseconds   */
-#define SDRAM_NRA   8192	/* Number of row addresses in SDRAM */
-#define SDRAM_CL    CL_3
-#endif
-
-#if (CONFIG_MEM_GENERIC_BOARD)
-  /*SDRAM INFORMATION: Modify this for your board */
-#define SDRAM_Tref  64		/* Refresh period in milliseconds   */
-#define SDRAM_NRA   8192	/* Number of row addresses in SDRAM */
-#define SDRAM_CL    CL_3
-#endif
-
-#if (CONFIG_MEM_MT48LC32M16A2TG_75)
-  /*SDRAM INFORMATION: */
-#define SDRAM_Tref  64		/* Refresh period in milliseconds   */
-#define SDRAM_NRA   8192	/* Number of row addresses in SDRAM */
-#define SDRAM_CL    CL_3
-#endif
-
-#if (CONFIG_MEM_SIZE == 128)
-#define SDRAM_SIZE      EBSZ_128
-#endif
-#if (CONFIG_MEM_SIZE == 64)
-#define SDRAM_SIZE      EBSZ_64
-#endif
-#if (CONFIG_MEM_SIZE == 32)
-#define SDRAM_SIZE      EBSZ_32
-#endif
-#if (CONFIG_MEM_SIZE == 16)
-#define SDRAM_SIZE      EBSZ_16
-#endif
-#if (CONFIG_MEM_ADD_WIDTH == 11)
-#define SDRAM_WIDTH     EBCAW_11
-#endif
-#if (CONFIG_MEM_ADD_WIDTH == 10)
-#define SDRAM_WIDTH     EBCAW_10
-#endif
-#if (CONFIG_MEM_ADD_WIDTH == 9)
-#define SDRAM_WIDTH     EBCAW_9
-#endif
-#if (CONFIG_MEM_ADD_WIDTH == 8)
-#define SDRAM_WIDTH     EBCAW_8
-#endif
-
-#define mem_SDBCTL      (SDRAM_WIDTH | SDRAM_SIZE | EBE)
-
-/* Equation from section 17 (p17-46) of BF533 HRM */
-#define mem_SDRRC       (((CONFIG_SCLK_HZ / 1000) * SDRAM_Tref) / SDRAM_NRA) - (SDRAM_tRAS_num + SDRAM_tRP_num)
-
-/* Enable SCLK Out */
-#define mem_SDGCTL        (SCTLE | SDRAM_CL | SDRAM_tRAS | SDRAM_tRP | SDRAM_tRCD | SDRAM_tWR | PSS)
-
-#if defined CONFIG_CLKIN_HALF
-#define CLKIN_HALF       1
-#else
-#define CLKIN_HALF       0
-#endif
-
-#if defined CONFIG_PLL_BYPASS
-#define PLL_BYPASS      1
-#else
-#define PLL_BYPASS       0
-#endif
-
-/***************************************Currently Not Being Used *********************************/
-#define flash_EBIU_AMBCTL_WAT  ((CONFIG_FLASH_SPEED_BWAT * 4) / (4000000000 / CONFIG_SCLK_HZ)) + 1
-#define flash_EBIU_AMBCTL_RAT  ((CONFIG_FLASH_SPEED_BRAT * 4) / (4000000000 / CONFIG_SCLK_HZ)) + 1
-#define flash_EBIU_AMBCTL_HT   ((CONFIG_FLASH_SPEED_BHT  * 4) / (4000000000 / CONFIG_SCLK_HZ))
-#define flash_EBIU_AMBCTL_ST   ((CONFIG_FLASH_SPEED_BST  * 4) / (4000000000 / CONFIG_SCLK_HZ)) + 1
-#define flash_EBIU_AMBCTL_TT   ((CONFIG_FLASH_SPEED_BTT  * 4) / (4000000000 / CONFIG_SCLK_HZ)) + 1
-
-#if (flash_EBIU_AMBCTL_TT > 3)
-#define flash_EBIU_AMBCTL0_TT   B0TT_4
-#endif
-#if (flash_EBIU_AMBCTL_TT == 3)
-#define flash_EBIU_AMBCTL0_TT   B0TT_3
-#endif
-#if (flash_EBIU_AMBCTL_TT == 2)
-#define flash_EBIU_AMBCTL0_TT   B0TT_2
-#endif
-#if (flash_EBIU_AMBCTL_TT < 2)
-#define flash_EBIU_AMBCTL0_TT   B0TT_1
-#endif
-
-#if (flash_EBIU_AMBCTL_ST > 3)
-#define flash_EBIU_AMBCTL0_ST   B0ST_4
-#endif
-#if (flash_EBIU_AMBCTL_ST == 3)
-#define flash_EBIU_AMBCTL0_ST   B0ST_3
-#endif
-#if (flash_EBIU_AMBCTL_ST == 2)
-#define flash_EBIU_AMBCTL0_ST   B0ST_2
-#endif
-#if (flash_EBIU_AMBCTL_ST < 2)
-#define flash_EBIU_AMBCTL0_ST   B0ST_1
-#endif
-
-#if (flash_EBIU_AMBCTL_HT > 2)
-#define flash_EBIU_AMBCTL0_HT   B0HT_3
-#endif
-#if (flash_EBIU_AMBCTL_HT == 2)
-#define flash_EBIU_AMBCTL0_HT   B0HT_2
-#endif
-#if (flash_EBIU_AMBCTL_HT == 1)
-#define flash_EBIU_AMBCTL0_HT   B0HT_1
-#endif
-#if (flash_EBIU_AMBCTL_HT == 0 && CONFIG_FLASH_SPEED_BHT == 0)
-#define flash_EBIU_AMBCTL0_HT   B0HT_0
-#endif
-#if (flash_EBIU_AMBCTL_HT == 0 && CONFIG_FLASH_SPEED_BHT != 0)
-#define flash_EBIU_AMBCTL0_HT   B0HT_1
-#endif
-
-#if (flash_EBIU_AMBCTL_WAT > 14)
-#define flash_EBIU_AMBCTL0_WAT  B0WAT_15
-#endif
-#if (flash_EBIU_AMBCTL_WAT == 14)
-#define flash_EBIU_AMBCTL0_WAT  B0WAT_14
-#endif
-#if (flash_EBIU_AMBCTL_WAT == 13)
-#define flash_EBIU_AMBCTL0_WAT  B0WAT_13
-#endif
-#if (flash_EBIU_AMBCTL_WAT == 12)
-#define flash_EBIU_AMBCTL0_WAT  B0WAT_12
-#endif
-#if (flash_EBIU_AMBCTL_WAT == 11)
-#define flash_EBIU_AMBCTL0_WAT  B0WAT_11
-#endif
-#if (flash_EBIU_AMBCTL_WAT == 10)
-#define flash_EBIU_AMBCTL0_WAT  B0WAT_10
-#endif
-#if (flash_EBIU_AMBCTL_WAT == 9)
-#define flash_EBIU_AMBCTL0_WAT  B0WAT_9
-#endif
-#if (flash_EBIU_AMBCTL_WAT == 8)
-#define flash_EBIU_AMBCTL0_WAT  B0WAT_8
-#endif
-#if (flash_EBIU_AMBCTL_WAT == 7)
-#define flash_EBIU_AMBCTL0_WAT  B0WAT_7
-#endif
-#if (flash_EBIU_AMBCTL_WAT == 6)
-#define flash_EBIU_AMBCTL0_WAT  B0WAT_6
-#endif
-#if (flash_EBIU_AMBCTL_WAT == 5)
-#define flash_EBIU_AMBCTL0_WAT  B0WAT_5
-#endif
-#if (flash_EBIU_AMBCTL_WAT == 4)
-#define flash_EBIU_AMBCTL0_WAT  B0WAT_4
-#endif
-#if (flash_EBIU_AMBCTL_WAT == 3)
-#define flash_EBIU_AMBCTL0_WAT  B0WAT_3
-#endif
-#if (flash_EBIU_AMBCTL_WAT == 2)
-#define flash_EBIU_AMBCTL0_WAT  B0WAT_2
-#endif
-#if (flash_EBIU_AMBCTL_WAT == 1)
-#define flash_EBIU_AMBCTL0_WAT  B0WAT_1
-#endif
-
-#if (flash_EBIU_AMBCTL_RAT > 14)
-#define flash_EBIU_AMBCTL0_RAT  B0RAT_15
-#endif
-#if (flash_EBIU_AMBCTL_RAT == 14)
-#define flash_EBIU_AMBCTL0_RAT  B0RAT_14
-#endif
-#if (flash_EBIU_AMBCTL_RAT == 13)
-#define flash_EBIU_AMBCTL0_RAT  B0RAT_13
-#endif
-#if (flash_EBIU_AMBCTL_RAT == 12)
-#define flash_EBIU_AMBCTL0_RAT  B0RAT_12
-#endif
-#if (flash_EBIU_AMBCTL_RAT == 11)
-#define flash_EBIU_AMBCTL0_RAT  B0RAT_11
-#endif
-#if (flash_EBIU_AMBCTL_RAT == 10)
-#define flash_EBIU_AMBCTL0_RAT  B0RAT_10
-#endif
-#if (flash_EBIU_AMBCTL_RAT == 9)
-#define flash_EBIU_AMBCTL0_RAT  B0RAT_9
-#endif
-#if (flash_EBIU_AMBCTL_RAT == 8)
-#define flash_EBIU_AMBCTL0_RAT  B0RAT_8
-#endif
-#if (flash_EBIU_AMBCTL_RAT == 7)
-#define flash_EBIU_AMBCTL0_RAT  B0RAT_7
-#endif
-#if (flash_EBIU_AMBCTL_RAT == 6)
-#define flash_EBIU_AMBCTL0_RAT  B0RAT_6
-#endif
-#if (flash_EBIU_AMBCTL_RAT == 5)
-#define flash_EBIU_AMBCTL0_RAT  B0RAT_5
-#endif
-#if (flash_EBIU_AMBCTL_RAT == 4)
-#define flash_EBIU_AMBCTL0_RAT  B0RAT_4
-#endif
-#if (flash_EBIU_AMBCTL_RAT == 3)
-#define flash_EBIU_AMBCTL0_RAT  B0RAT_3
-#endif
-#if (flash_EBIU_AMBCTL_RAT == 2)
-#define flash_EBIU_AMBCTL0_RAT  B0RAT_2
-#endif
-#if (flash_EBIU_AMBCTL_RAT == 1)
-#define flash_EBIU_AMBCTL0_RAT  B0RAT_1
-#endif
-
-#define flash_EBIU_AMBCTL0  \
-	(flash_EBIU_AMBCTL0_WAT | flash_EBIU_AMBCTL0_RAT | flash_EBIU_AMBCTL0_HT | \
-	 flash_EBIU_AMBCTL0_ST | flash_EBIU_AMBCTL0_TT | CONFIG_FLASH_SPEED_RDYEN)
diff --git a/include/asm-blackfin/mach-bf527/mem_map.h b/include/asm-blackfin/mach-bf527/mem_map.h
deleted file mode 100644
index 193082deaa4e..000000000000
--- a/include/asm-blackfin/mach-bf527/mem_map.h
+++ /dev/null
@@ -1,97 +0,0 @@
-/*
- * file:         include/asm-blackfin/mach-bf527/mem_map.h
- * based on:	include/asm-blackfin/mach-bf537/mem_map.h
- * author:	Michael Hennerich (michael.hennerich@analog.com)
- *
- * created:
- * description:
- *	Memory MAP Common header file for blackfin BF527/5/2 of processors.
- * rev:
- *
- * modified:
- *
- * bugs:         enter bugs at http://blackfin.uclinux.org/
- *
- * this program is free software; you can redistribute it and/or modify
- * it under the terms of the gnu general public license as published by
- * the free software foundation; either version 2, or (at your option)
- * any later version.
- *
- * this program is distributed in the hope that it will be useful,
- * but without any warranty; without even the implied warranty of
- * merchantability or fitness for a particular purpose.  see the
- * gnu general public license for more details.
- *
- * you should have received a copy of the gnu general public license
- * along with this program; see the file copying.
- * if not, write to the free software foundation,
- * 59 temple place - suite 330, boston, ma 02111-1307, usa.
- */
-
-#ifndef _MEM_MAP_527_H_
-#define _MEM_MAP_527_H_
-
-#define COREMMR_BASE           0xFFE00000	/* Core MMRs */
-#define SYSMMR_BASE            0xFFC00000	/* System MMRs */
-
-/* Async Memory Banks */
-#define ASYNC_BANK3_BASE	0x20300000	/* Async Bank 3 */
-#define ASYNC_BANK3_SIZE	0x00100000	/* 1M */
-#define ASYNC_BANK2_BASE	0x20200000	/* Async Bank 2 */
-#define ASYNC_BANK2_SIZE	0x00100000	/* 1M */
-#define ASYNC_BANK1_BASE	0x20100000	/* Async Bank 1 */
-#define ASYNC_BANK1_SIZE	0x00100000	/* 1M */
-#define ASYNC_BANK0_BASE	0x20000000	/* Async Bank 0 */
-#define ASYNC_BANK0_SIZE	0x00100000	/* 1M */
-
-/* Boot ROM Memory */
-
-#define BOOT_ROM_START		0xEF000000
-#define BOOT_ROM_LENGTH		0x8000
-
-/* Level 1 Memory */
-
-/* Memory Map for ADSP-BF527 ADSP-BF525 ADSP-BF522 processors */
-
-#ifdef CONFIG_BFIN_ICACHE
-#define BFIN_ICACHESIZE	(16*1024)
-#else
-#define BFIN_ICACHESIZE	(0*1024)
-#endif
-
-#define L1_CODE_START       0xFFA00000
-#define L1_DATA_A_START     0xFF800000
-#define L1_DATA_B_START     0xFF900000
-
-#define L1_CODE_LENGTH      0xC000
-
-#ifdef CONFIG_BFIN_DCACHE
-
-#ifdef CONFIG_BFIN_DCACHE_BANKA
-#define DMEM_CNTR (ACACHE_BSRAM | ENDCPLB | PORT_PREF0)
-#define L1_DATA_A_LENGTH      (0x8000 - 0x4000)
-#define L1_DATA_B_LENGTH      0x8000
-#define BFIN_DCACHESIZE	(16*1024)
-#define BFIN_DSUPBANKS	1
-#else
-#define DMEM_CNTR (ACACHE_BCACHE | ENDCPLB | PORT_PREF0)
-#define L1_DATA_A_LENGTH      (0x8000 - 0x4000)
-#define L1_DATA_B_LENGTH      (0x8000 - 0x4000)
-#define BFIN_DCACHESIZE	(32*1024)
-#define BFIN_DSUPBANKS	2
-#endif
-
-#else
-#define DMEM_CNTR (ASRAM_BSRAM | ENDCPLB | PORT_PREF0)
-#define L1_DATA_A_LENGTH      0x8000
-#define L1_DATA_B_LENGTH      0x8000
-#define BFIN_DCACHESIZE	(0*1024)
-#define BFIN_DSUPBANKS	0
-#endif				/*CONFIG_BFIN_DCACHE */
-
-/* Scratch Pad Memory */
-
-#define L1_SCRATCH_START	0xFFB00000
-#define L1_SCRATCH_LENGTH	0x1000
-
-#endif				/* _MEM_MAP_527_H_ */
diff --git a/include/asm-blackfin/mach-bf533/bfin_sir.h b/include/asm-blackfin/mach-bf533/bfin_sir.h
deleted file mode 100644
index cefcf8bb505b..000000000000
--- a/include/asm-blackfin/mach-bf533/bfin_sir.h
+++ /dev/null
@@ -1,120 +0,0 @@
-/*
- * Blackfin Infra-red Driver
- *
- * Copyright 2006-2008 Analog Devices Inc.
- *
- * Enter bugs at http://blackfin.uclinux.org/
- *
- * Licensed under the GPL-2 or later.
- *
- */
-
-#include <linux/serial.h>
-#include <asm/dma.h>
-#include <asm/portmux.h>
-
-#define SIR_UART_GET_CHAR(port)   bfin_read16((port)->membase + OFFSET_RBR)
-#define SIR_UART_GET_DLL(port)    bfin_read16((port)->membase + OFFSET_DLL)
-#define SIR_UART_GET_IER(port)    bfin_read16((port)->membase + OFFSET_IER)
-#define SIR_UART_GET_DLH(port)    bfin_read16((port)->membase + OFFSET_DLH)
-#define SIR_UART_GET_IIR(port)    bfin_read16((port)->membase + OFFSET_IIR)
-#define SIR_UART_GET_LCR(port)    bfin_read16((port)->membase + OFFSET_LCR)
-#define SIR_UART_GET_GCTL(port)   bfin_read16((port)->membase + OFFSET_GCTL)
-
-#define SIR_UART_PUT_CHAR(port, v) bfin_write16(((port)->membase + OFFSET_THR), v)
-#define SIR_UART_PUT_DLL(port, v)  bfin_write16(((port)->membase + OFFSET_DLL), v)
-#define SIR_UART_PUT_IER(port, v)  bfin_write16(((port)->membase + OFFSET_IER), v)
-#define SIR_UART_PUT_DLH(port, v)  bfin_write16(((port)->membase + OFFSET_DLH), v)
-#define SIR_UART_PUT_LCR(port, v)  bfin_write16(((port)->membase + OFFSET_LCR), v)
-#define SIR_UART_PUT_GCTL(port, v) bfin_write16(((port)->membase + OFFSET_GCTL), v)
-
-#ifdef CONFIG_SIR_BFIN_DMA
-struct dma_rx_buf {
-	char *buf;
-	int head;
-	int tail;
-	};
-#endif /* CONFIG_SIR_BFIN_DMA */
-
-struct bfin_sir_port {
-	unsigned char __iomem   *membase;
-	unsigned int            irq;
-	unsigned int            lsr;
-	unsigned long           clk;
-	struct net_device       *dev;
-#ifdef CONFIG_SIR_BFIN_DMA
-	int                     tx_done;
-	struct dma_rx_buf       rx_dma_buf;
-	struct timer_list       rx_dma_timer;
-	int                     rx_dma_nrows;
-#endif /* CONFIG_SIR_BFIN_DMA */
-	unsigned int            tx_dma_channel;
-	unsigned int            rx_dma_channel;
-};
-
-struct bfin_sir_port sir_ports[BFIN_UART_NR_PORTS];
-
-struct bfin_sir_port_res {
-	unsigned long   base_addr;
-	int             irq;
-	unsigned int    rx_dma_channel;
-	unsigned int    tx_dma_channel;
-};
-
-struct bfin_sir_port_res bfin_sir_port_resource[] = {
-#ifdef CONFIG_BFIN_SIR0
-	{
-	0xFFC00400,
-	IRQ_UART_RX,
-	CH_UART_RX,
-	CH_UART_TX,
-	},
-#endif
-};
-
-int nr_sirs = ARRAY_SIZE(bfin_sir_port_resource);
-
-struct bfin_sir_self {
-	struct bfin_sir_port    *sir_port;
-	spinlock_t              lock;
-	unsigned int            open;
-	int                     speed;
-	int                     newspeed;
-
-	struct sk_buff          *txskb;
-	struct sk_buff          *rxskb;
-	struct net_device_stats stats;
-	struct device           *dev;
-	struct irlap_cb         *irlap;
-	struct qos_info         qos;
-
-	iobuff_t                tx_buff;
-	iobuff_t                rx_buff;
-
-	struct work_struct      work;
-	int                     mtt;
-};
-
-static inline unsigned int SIR_UART_GET_LSR(struct bfin_sir_port *port)
-{
-	unsigned int lsr = bfin_read16(port->membase + OFFSET_LSR);
-	port->lsr |= (lsr & (BI|FE|PE|OE));
-	return lsr | port->lsr;
-}
-
-static inline void SIR_UART_CLEAR_LSR(struct bfin_sir_port *port)
-{
-	port->lsr = 0;
-	bfin_read16(port->membase + OFFSET_LSR);
-}
-
-#define DRIVER_NAME "bfin_sir"
-
-static void bfin_sir_hw_init(void)
-{
-#ifdef CONFIG_BFIN_SIR0
-	peripheral_request(P_UART0_TX, DRIVER_NAME);
-	peripheral_request(P_UART0_RX, DRIVER_NAME);
-#endif
-	SSYNC();
-}
diff --git a/include/asm-blackfin/mach-bf533/mem_init.h b/include/asm-blackfin/mach-bf533/mem_init.h
deleted file mode 100644
index f8f31901fca9..000000000000
--- a/include/asm-blackfin/mach-bf533/mem_init.h
+++ /dev/null
@@ -1,324 +0,0 @@
-/*
- * File:         include/asm-blackfin/mach-bf533/mem_init.h
- * Based on:
- * Author:
- *
- * Created:
- * Description:
- *
- * Rev:
- *
- * Modified:
- *               Copyright 2004-2006 Analog Devices Inc.
- *
- * Bugs:         Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2, or (at your option)
- * any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; see the file COPYING.
- * If not, write to the Free Software Foundation,
- * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
- */
-
-#if (CONFIG_MEM_MT48LC16M16A2TG_75 || CONFIG_MEM_MT48LC64M4A2FB_7E || \
-     CONFIG_MEM_MT48LC32M16A2TG_75 || CONFIG_MEM_GENERIC_BOARD)
-#if (CONFIG_SCLK_HZ > 119402985)
-#define SDRAM_tRP       TRP_2
-#define SDRAM_tRP_num   2
-#define SDRAM_tRAS      TRAS_7
-#define SDRAM_tRAS_num  7
-#define SDRAM_tRCD      TRCD_2
-#define SDRAM_tWR       TWR_2
-#endif
-#if (CONFIG_SCLK_HZ > 104477612) && (CONFIG_SCLK_HZ <= 119402985)
-#define SDRAM_tRP       TRP_2
-#define SDRAM_tRP_num   2
-#define SDRAM_tRAS      TRAS_6
-#define SDRAM_tRAS_num  6
-#define SDRAM_tRCD      TRCD_2
-#define SDRAM_tWR       TWR_2
-#endif
-#if (CONFIG_SCLK_HZ > 8955223) && (CONFIG_SCLK_HZ <= 104477612)
-#define SDRAM_tRP       TRP_2
-#define SDRAM_tRP_num   2
-#define SDRAM_tRAS      TRAS_5
-#define SDRAM_tRAS_num  5
-#define SDRAM_tRCD      TRCD_2
-#define SDRAM_tWR       TWR_2
-#endif
-#if (CONFIG_SCLK_HZ > 74626866) && (CONFIG_SCLK_HZ <= 89552239)
-#define SDRAM_tRP       TRP_2
-#define SDRAM_tRP_num   2
-#define SDRAM_tRAS      TRAS_4
-#define SDRAM_tRAS_num  4
-#define SDRAM_tRCD      TRCD_2
-#define SDRAM_tWR       TWR_2
-#endif
-#if (CONFIG_SCLK_HZ > 66666667) && (CONFIG_SCLK_HZ <= 74626866)
-#define SDRAM_tRP       TRP_2
-#define SDRAM_tRP_num   2
-#define SDRAM_tRAS      TRAS_3
-#define SDRAM_tRAS_num  3
-#define SDRAM_tRCD      TRCD_2
-#define SDRAM_tWR       TWR_2
-#endif
-#if (CONFIG_SCLK_HZ > 59701493) && (CONFIG_SCLK_HZ <= 66666667)
-#define SDRAM_tRP       TRP_1
-#define SDRAM_tRP_num   1
-#define SDRAM_tRAS      TRAS_4
-#define SDRAM_tRAS_num  3
-#define SDRAM_tRCD      TRCD_1
-#define SDRAM_tWR       TWR_2
-#endif
-#if (CONFIG_SCLK_HZ > 44776119) && (CONFIG_SCLK_HZ <= 59701493)
-#define SDRAM_tRP       TRP_1
-#define SDRAM_tRP_num   1
-#define SDRAM_tRAS      TRAS_3
-#define SDRAM_tRAS_num  3
-#define SDRAM_tRCD      TRCD_1
-#define SDRAM_tWR       TWR_2
-#endif
-#if (CONFIG_SCLK_HZ > 29850746) && (CONFIG_SCLK_HZ <= 44776119)
-#define SDRAM_tRP       TRP_1
-#define SDRAM_tRP_num   1
-#define SDRAM_tRAS      TRAS_2
-#define SDRAM_tRAS_num  2
-#define SDRAM_tRCD      TRCD_1
-#define SDRAM_tWR       TWR_2
-#endif
-#if (CONFIG_SCLK_HZ <= 29850746)
-#define SDRAM_tRP       TRP_1
-#define SDRAM_tRP_num   1
-#define SDRAM_tRAS      TRAS_1
-#define SDRAM_tRAS_num  1
-#define SDRAM_tRCD      TRCD_1
-#define SDRAM_tWR       TWR_2
-#endif
-#endif
-
-#if (CONFIG_MEM_MT48LC16M16A2TG_75)
-  /*SDRAM INFORMATION: */
-#define SDRAM_Tref  64		/* Refresh period in milliseconds   */
-#define SDRAM_NRA   8192	/* Number of row addresses in SDRAM */
-#define SDRAM_CL    CL_3
-#endif
-
-#if (CONFIG_MEM_MT48LC64M4A2FB_7E)
-  /*SDRAM INFORMATION: */
-#define SDRAM_Tref  64		/* Refresh period in milliseconds   */
-#define SDRAM_NRA   8192	/* Number of row addresses in SDRAM */
-#define SDRAM_CL    CL_3
-#endif
-
-#if (CONFIG_MEM_MT48LC32M16A2TG_75)
-  /*SDRAM INFORMATION: */
-#define SDRAM_Tref  64		/* Refresh period in milliseconds   */
-#define SDRAM_NRA   8192	/* Number of row addresses in SDRAM */
-#define SDRAM_CL    CL_3
-#endif
-
-#if (CONFIG_MEM_GENERIC_BOARD)
-  /*SDRAM INFORMATION: Modify this for your board */
-#define SDRAM_Tref  64		/* Refresh period in milliseconds   */
-#define SDRAM_NRA   8192	/* Number of row addresses in SDRAM */
-#define SDRAM_CL    CL_3
-#endif
-
-#if (CONFIG_MEM_SIZE == 128)
-#define SDRAM_SIZE      EBSZ_128
-#endif
-#if (CONFIG_MEM_SIZE == 64)
-#define SDRAM_SIZE      EBSZ_64
-#endif
-#if (CONFIG_MEM_SIZE == 32)
-#define SDRAM_SIZE      EBSZ_32
-#endif
-#if (CONFIG_MEM_SIZE == 16)
-#define SDRAM_SIZE      EBSZ_16
-#endif
-#if (CONFIG_MEM_ADD_WIDTH == 11)
-#define SDRAM_WIDTH     EBCAW_11
-#endif
-#if (CONFIG_MEM_ADD_WIDTH == 10)
-#define SDRAM_WIDTH     EBCAW_10
-#endif
-#if (CONFIG_MEM_ADD_WIDTH == 9)
-#define SDRAM_WIDTH     EBCAW_9
-#endif
-#if (CONFIG_MEM_ADD_WIDTH == 8)
-#define SDRAM_WIDTH     EBCAW_8
-#endif
-
-#define mem_SDBCTL      (SDRAM_WIDTH | SDRAM_SIZE | EBE)
-
-/* Equation from section 17 (p17-46) of BF533 HRM */
-#define mem_SDRRC       (((CONFIG_SCLK_HZ / 1000) * SDRAM_Tref)  / SDRAM_NRA) - (SDRAM_tRAS_num + SDRAM_tRP_num)
-
-/* Enable SCLK Out */
-#define mem_SDGCTL        (SCTLE | SDRAM_CL | SDRAM_tRAS | SDRAM_tRP | SDRAM_tRCD | SDRAM_tWR | PSS)
-
-#if defined CONFIG_CLKIN_HALF
-#define CLKIN_HALF       1
-#else
-#define CLKIN_HALF       0
-#endif
-
-#if defined CONFIG_PLL_BYPASS
-#define PLL_BYPASS      1
-#else
-#define PLL_BYPASS       0
-#endif
-
-/***************************************Currently Not Being Used *********************************/
-#define flash_EBIU_AMBCTL_WAT  ((CONFIG_FLASH_SPEED_BWAT * 4) / (4000000000 / CONFIG_SCLK_HZ)) + 1
-#define flash_EBIU_AMBCTL_RAT  ((CONFIG_FLASH_SPEED_BRAT * 4) / (4000000000 / CONFIG_SCLK_HZ)) + 1
-#define flash_EBIU_AMBCTL_HT   ((CONFIG_FLASH_SPEED_BHT  * 4) / (4000000000 / CONFIG_SCLK_HZ))
-#define flash_EBIU_AMBCTL_ST   ((CONFIG_FLASH_SPEED_BST  * 4) / (4000000000 / CONFIG_SCLK_HZ)) + 1
-#define flash_EBIU_AMBCTL_TT   ((CONFIG_FLASH_SPEED_BTT  * 4) / (4000000000 / CONFIG_SCLK_HZ)) + 1
-
-#if (flash_EBIU_AMBCTL_TT > 3)
-#define flash_EBIU_AMBCTL0_TT   B0TT_4
-#endif
-#if (flash_EBIU_AMBCTL_TT == 3)
-#define flash_EBIU_AMBCTL0_TT   B0TT_3
-#endif
-#if (flash_EBIU_AMBCTL_TT == 2)
-#define flash_EBIU_AMBCTL0_TT   B0TT_2
-#endif
-#if (flash_EBIU_AMBCTL_TT < 2)
-#define flash_EBIU_AMBCTL0_TT   B0TT_1
-#endif
-
-#if (flash_EBIU_AMBCTL_ST > 3)
-#define flash_EBIU_AMBCTL0_ST   B0ST_4
-#endif
-#if (flash_EBIU_AMBCTL_ST == 3)
-#define flash_EBIU_AMBCTL0_ST   B0ST_3
-#endif
-#if (flash_EBIU_AMBCTL_ST == 2)
-#define flash_EBIU_AMBCTL0_ST   B0ST_2
-#endif
-#if (flash_EBIU_AMBCTL_ST < 2)
-#define flash_EBIU_AMBCTL0_ST   B0ST_1
-#endif
-
-#if (flash_EBIU_AMBCTL_HT > 2)
-#define flash_EBIU_AMBCTL0_HT   B0HT_3
-#endif
-#if (flash_EBIU_AMBCTL_HT == 2)
-#define flash_EBIU_AMBCTL0_HT   B0HT_2
-#endif
-#if (flash_EBIU_AMBCTL_HT == 1)
-#define flash_EBIU_AMBCTL0_HT   B0HT_1
-#endif
-#if (flash_EBIU_AMBCTL_HT == 0 && CONFIG_FLASH_SPEED_BHT == 0)
-#define flash_EBIU_AMBCTL0_HT   B0HT_0
-#endif
-#if (flash_EBIU_AMBCTL_HT == 0 && CONFIG_FLASH_SPEED_BHT != 0)
-#define flash_EBIU_AMBCTL0_HT   B0HT_1
-#endif
-
-#if (flash_EBIU_AMBCTL_WAT > 14)
-#define flash_EBIU_AMBCTL0_WAT  B0WAT_15
-#endif
-#if (flash_EBIU_AMBCTL_WAT == 14)
-#define flash_EBIU_AMBCTL0_WAT  B0WAT_14
-#endif
-#if (flash_EBIU_AMBCTL_WAT == 13)
-#define flash_EBIU_AMBCTL0_WAT  B0WAT_13
-#endif
-#if (flash_EBIU_AMBCTL_WAT == 12)
-#define flash_EBIU_AMBCTL0_WAT  B0WAT_12
-#endif
-#if (flash_EBIU_AMBCTL_WAT == 11)
-#define flash_EBIU_AMBCTL0_WAT  B0WAT_11
-#endif
-#if (flash_EBIU_AMBCTL_WAT == 10)
-#define flash_EBIU_AMBCTL0_WAT  B0WAT_10
-#endif
-#if (flash_EBIU_AMBCTL_WAT == 9)
-#define flash_EBIU_AMBCTL0_WAT  B0WAT_9
-#endif
-#if (flash_EBIU_AMBCTL_WAT == 8)
-#define flash_EBIU_AMBCTL0_WAT  B0WAT_8
-#endif
-#if (flash_EBIU_AMBCTL_WAT == 7)
-#define flash_EBIU_AMBCTL0_WAT  B0WAT_7
-#endif
-#if (flash_EBIU_AMBCTL_WAT == 6)
-#define flash_EBIU_AMBCTL0_WAT  B0WAT_6
-#endif
-#if (flash_EBIU_AMBCTL_WAT == 5)
-#define flash_EBIU_AMBCTL0_WAT  B0WAT_5
-#endif
-#if (flash_EBIU_AMBCTL_WAT == 4)
-#define flash_EBIU_AMBCTL0_WAT  B0WAT_4
-#endif
-#if (flash_EBIU_AMBCTL_WAT == 3)
-#define flash_EBIU_AMBCTL0_WAT  B0WAT_3
-#endif
-#if (flash_EBIU_AMBCTL_WAT == 2)
-#define flash_EBIU_AMBCTL0_WAT  B0WAT_2
-#endif
-#if (flash_EBIU_AMBCTL_WAT == 1)
-#define flash_EBIU_AMBCTL0_WAT  B0WAT_1
-#endif
-
-#if (flash_EBIU_AMBCTL_RAT > 14)
-#define flash_EBIU_AMBCTL0_RAT  B0RAT_15
-#endif
-#if (flash_EBIU_AMBCTL_RAT == 14)
-#define flash_EBIU_AMBCTL0_RAT  B0RAT_14
-#endif
-#if (flash_EBIU_AMBCTL_RAT == 13)
-#define flash_EBIU_AMBCTL0_RAT  B0RAT_13
-#endif
-#if (flash_EBIU_AMBCTL_RAT == 12)
-#define flash_EBIU_AMBCTL0_RAT  B0RAT_12
-#endif
-#if (flash_EBIU_AMBCTL_RAT == 11)
-#define flash_EBIU_AMBCTL0_RAT  B0RAT_11
-#endif
-#if (flash_EBIU_AMBCTL_RAT == 10)
-#define flash_EBIU_AMBCTL0_RAT  B0RAT_10
-#endif
-#if (flash_EBIU_AMBCTL_RAT == 9)
-#define flash_EBIU_AMBCTL0_RAT  B0RAT_9
-#endif
-#if (flash_EBIU_AMBCTL_RAT == 8)
-#define flash_EBIU_AMBCTL0_RAT  B0RAT_8
-#endif
-#if (flash_EBIU_AMBCTL_RAT == 7)
-#define flash_EBIU_AMBCTL0_RAT  B0RAT_7
-#endif
-#if (flash_EBIU_AMBCTL_RAT == 6)
-#define flash_EBIU_AMBCTL0_RAT  B0RAT_6
-#endif
-#if (flash_EBIU_AMBCTL_RAT == 5)
-#define flash_EBIU_AMBCTL0_RAT  B0RAT_5
-#endif
-#if (flash_EBIU_AMBCTL_RAT == 4)
-#define flash_EBIU_AMBCTL0_RAT  B0RAT_4
-#endif
-#if (flash_EBIU_AMBCTL_RAT == 3)
-#define flash_EBIU_AMBCTL0_RAT  B0RAT_3
-#endif
-#if (flash_EBIU_AMBCTL_RAT == 2)
-#define flash_EBIU_AMBCTL0_RAT  B0RAT_2
-#endif
-#if (flash_EBIU_AMBCTL_RAT == 1)
-#define flash_EBIU_AMBCTL0_RAT  B0RAT_1
-#endif
-
-#define flash_EBIU_AMBCTL0  \
-	(flash_EBIU_AMBCTL0_WAT | flash_EBIU_AMBCTL0_RAT | flash_EBIU_AMBCTL0_HT | \
-	 flash_EBIU_AMBCTL0_ST | flash_EBIU_AMBCTL0_TT | CONFIG_FLASH_SPEED_RDYEN)
diff --git a/include/asm-blackfin/mach-bf533/mem_map.h b/include/asm-blackfin/mach-bf533/mem_map.h
deleted file mode 100644
index bd30b6f3be00..000000000000
--- a/include/asm-blackfin/mach-bf533/mem_map.h
+++ /dev/null
@@ -1,166 +0,0 @@
-/*
- * File:         include/asm-blackfin/mach-bf533/mem_map.h
- * Based on:
- * Author:
- *
- * Created:
- * Description:
- *
- * Rev:
- *
- * Modified:
- *
- * Bugs:         Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2, or (at your option)
- * any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; see the file COPYING.
- * If not, write to the Free Software Foundation,
- * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
- */
-
-#ifndef _MEM_MAP_533_H_
-#define _MEM_MAP_533_H_
-
-#define COREMMR_BASE           0xFFE00000	 /* Core MMRs */
-#define SYSMMR_BASE            0xFFC00000	 /* System MMRs */
-
-/* Async Memory Banks */
-#define ASYNC_BANK3_BASE	0x20300000	 /* Async Bank 3 */
-#define ASYNC_BANK3_SIZE	0x00100000	/* 1M */
-#define ASYNC_BANK2_BASE	0x20200000	 /* Async Bank 2 */
-#define ASYNC_BANK2_SIZE	0x00100000	/* 1M */
-#define ASYNC_BANK1_BASE	0x20100000	 /* Async Bank 1 */
-#define ASYNC_BANK1_SIZE	0x00100000	/* 1M */
-#define ASYNC_BANK0_BASE	0x20000000	 /* Async Bank 0 */
-#define ASYNC_BANK0_SIZE	0x00100000	/* 1M */
-
-/* Boot ROM Memory */
-
-#define BOOT_ROM_START		0xEF000000
-#define BOOT_ROM_LENGTH		0x400
-
-/* Level 1 Memory */
-
-#ifdef CONFIG_BFIN_ICACHE
-#define BFIN_ICACHESIZE	(16*1024)
-#else
-#define BFIN_ICACHESIZE	(0*1024)
-#endif
-
-/* Memory Map for ADSP-BF533 processors */
-
-#ifdef CONFIG_BF533
-#define L1_CODE_START       0xFFA00000
-#define L1_DATA_A_START     0xFF800000
-#define L1_DATA_B_START     0xFF900000
-
-#ifdef CONFIG_BFIN_ICACHE
-#define L1_CODE_LENGTH      (0x14000 - 0x4000)
-#else
-#define L1_CODE_LENGTH      0x14000
-#endif
-
-#ifdef CONFIG_BFIN_DCACHE
-
-#ifdef CONFIG_BFIN_DCACHE_BANKA
-#define DMEM_CNTR (ACACHE_BSRAM | ENDCPLB | PORT_PREF0)
-#define L1_DATA_A_LENGTH      (0x8000 - 0x4000)
-#define L1_DATA_B_LENGTH      0x8000
-#define BFIN_DCACHESIZE	(16*1024)
-#define BFIN_DSUPBANKS	1
-#else
-#define DMEM_CNTR (ACACHE_BCACHE | ENDCPLB | PORT_PREF0)
-#define L1_DATA_A_LENGTH      (0x8000 - 0x4000)
-#define L1_DATA_B_LENGTH      (0x8000 - 0x4000)
-#define BFIN_DCACHESIZE	(32*1024)
-#define BFIN_DSUPBANKS	2
-#endif
-
-#else
-#define DMEM_CNTR (ASRAM_BSRAM | ENDCPLB | PORT_PREF0)
-#define L1_DATA_A_LENGTH      0x8000
-#define L1_DATA_B_LENGTH      0x8000
-#define BFIN_DCACHESIZE	(0*1024)
-#define BFIN_DSUPBANKS	0
-#endif /*CONFIG_BFIN_DCACHE*/
-#endif
-
-/* Memory Map for ADSP-BF532 processors */
-
-#ifdef CONFIG_BF532
-#define L1_CODE_START       0xFFA08000
-#define L1_DATA_A_START     0xFF804000
-#define L1_DATA_B_START     0xFF904000
-
-#ifdef CONFIG_BFIN_ICACHE
-#define L1_CODE_LENGTH      (0xC000 - 0x4000)
-#else
-#define L1_CODE_LENGTH      0xC000
-#endif
-
-#ifdef CONFIG_BFIN_DCACHE
-
-#ifdef CONFIG_BFIN_DCACHE_BANKA
-#define DMEM_CNTR (ACACHE_BSRAM | ENDCPLB | PORT_PREF0)
-#define L1_DATA_A_LENGTH      (0x4000 - 0x4000)
-#define L1_DATA_B_LENGTH      0x4000
-#define BFIN_DCACHESIZE	(16*1024)
-#define BFIN_DSUPBANKS	1
-
-#else
-#define DMEM_CNTR (ACACHE_BCACHE | ENDCPLB | PORT_PREF0)
-#define L1_DATA_A_LENGTH      (0x4000 - 0x4000)
-#define L1_DATA_B_LENGTH      (0x4000 - 0x4000)
-#define BFIN_DCACHESIZE	(32*1024)
-#define BFIN_DSUPBANKS	2
-#endif
-
-#else
-#define DMEM_CNTR (ASRAM_BSRAM | ENDCPLB | PORT_PREF0)
-#define L1_DATA_A_LENGTH      0x4000
-#define L1_DATA_B_LENGTH      0x4000
-#define BFIN_DCACHESIZE	(0*1024)
-#define BFIN_DSUPBANKS	0
-#endif /*CONFIG_BFIN_DCACHE*/
-#endif
-
-/* Memory Map for ADSP-BF531 processors */
-
-#ifdef CONFIG_BF531
-#define L1_CODE_START       0xFFA08000
-#define L1_DATA_A_START     0xFF804000
-#define L1_DATA_B_START     0xFF904000
-#define L1_CODE_LENGTH      0x4000
-#define L1_DATA_B_LENGTH      0x0000
-
-
-#ifdef CONFIG_BFIN_DCACHE
-#define DMEM_CNTR (ACACHE_BSRAM | ENDCPLB  | PORT_PREF0)
-#define L1_DATA_A_LENGTH      (0x4000 - 0x4000)
-#define BFIN_DCACHESIZE	(16*1024)
-#define BFIN_DSUPBANKS	1
-#else
-#define DMEM_CNTR (ASRAM_BSRAM | ENDCPLB  | PORT_PREF0)
-#define L1_DATA_A_LENGTH      0x4000
-#define BFIN_DCACHESIZE	(0*1024)
-#define BFIN_DSUPBANKS	0
-#endif
-
-#endif
-
-/* Scratch Pad Memory */
-
-#define L1_SCRATCH_START	0xFFB00000
-#define L1_SCRATCH_LENGTH	0x1000
-
-#endif				/* _MEM_MAP_533_H_ */
diff --git a/include/asm-blackfin/mach-bf537/bfin_sir.h b/include/asm-blackfin/mach-bf537/bfin_sir.h
deleted file mode 100644
index 0612d0c9501c..000000000000
--- a/include/asm-blackfin/mach-bf537/bfin_sir.h
+++ /dev/null
@@ -1,133 +0,0 @@
-/*
- * Blackfin Infra-red Driver
- *
- * Copyright 2006-2008 Analog Devices Inc.
- *
- * Enter bugs at http://blackfin.uclinux.org/
- *
- * Licensed under the GPL-2 or later.
- *
- */
-
-#include <linux/serial.h>
-#include <asm/dma.h>
-#include <asm/portmux.h>
-
-#define SIR_UART_GET_CHAR(port)   bfin_read16((port)->membase + OFFSET_RBR)
-#define SIR_UART_GET_DLL(port)    bfin_read16((port)->membase + OFFSET_DLL)
-#define SIR_UART_GET_IER(port)    bfin_read16((port)->membase + OFFSET_IER)
-#define SIR_UART_GET_DLH(port)    bfin_read16((port)->membase + OFFSET_DLH)
-#define SIR_UART_GET_IIR(port)    bfin_read16((port)->membase + OFFSET_IIR)
-#define SIR_UART_GET_LCR(port)    bfin_read16((port)->membase + OFFSET_LCR)
-#define SIR_UART_GET_GCTL(port)   bfin_read16((port)->membase + OFFSET_GCTL)
-
-#define SIR_UART_PUT_CHAR(port, v) bfin_write16(((port)->membase + OFFSET_THR), v)
-#define SIR_UART_PUT_DLL(port, v)  bfin_write16(((port)->membase + OFFSET_DLL), v)
-#define SIR_UART_PUT_IER(port, v)  bfin_write16(((port)->membase + OFFSET_IER), v)
-#define SIR_UART_PUT_DLH(port, v)  bfin_write16(((port)->membase + OFFSET_DLH), v)
-#define SIR_UART_PUT_LCR(port, v)  bfin_write16(((port)->membase + OFFSET_LCR), v)
-#define SIR_UART_PUT_GCTL(port, v) bfin_write16(((port)->membase + OFFSET_GCTL), v)
-
-#ifdef CONFIG_SIR_BFIN_DMA
-struct dma_rx_buf {
-	char *buf;
-	int head;
-	int tail;
-	};
-#endif /* CONFIG_SIR_BFIN_DMA */
-
-struct bfin_sir_port {
-	unsigned char __iomem   *membase;
-	unsigned int            irq;
-	unsigned int            lsr;
-	unsigned long           clk;
-	struct net_device       *dev;
-#ifdef CONFIG_SIR_BFIN_DMA
-	int                     tx_done;
-	struct dma_rx_buf       rx_dma_buf;
-	struct timer_list       rx_dma_timer;
-	int                     rx_dma_nrows;
-#endif /* CONFIG_SIR_BFIN_DMA */
-	unsigned int            tx_dma_channel;
-	unsigned int            rx_dma_channel;
-};
-
-struct bfin_sir_port sir_ports[BFIN_UART_NR_PORTS];
-
-struct bfin_sir_port_res {
-	unsigned long   base_addr;
-	int             irq;
-	unsigned int    rx_dma_channel;
-	unsigned int    tx_dma_channel;
-};
-
-struct bfin_sir_port_res bfin_sir_port_resource[] = {
-#ifdef CONFIG_BFIN_SIR0
-	{
-	0xFFC00400,
-	IRQ_UART0_RX,
-	CH_UART0_RX,
-	CH_UART0_TX,
-	},
-#endif
-#ifdef CONFIG_BFIN_SIR1
-	{
-	0xFFC02000,
-	IRQ_UART1_RX,
-	CH_UART1_RX,
-	CH_UART1_TX,
-	},
-#endif
-};
-
-int nr_sirs = ARRAY_SIZE(bfin_sir_port_resource);
-
-struct bfin_sir_self {
-	struct bfin_sir_port    *sir_port;
-	spinlock_t              lock;
-	unsigned int            open;
-	int                     speed;
-	int                     newspeed;
-
-	struct sk_buff          *txskb;
-	struct sk_buff          *rxskb;
-	struct net_device_stats stats;
-	struct device           *dev;
-	struct irlap_cb         *irlap;
-	struct qos_info         qos;
-
-	iobuff_t                tx_buff;
-	iobuff_t                rx_buff;
-
-	struct work_struct      work;
-	int                     mtt;
-};
-
-static inline unsigned int SIR_UART_GET_LSR(struct bfin_sir_port *port)
-{
-	unsigned int lsr = bfin_read16(port->membase + OFFSET_LSR);
-	port->lsr |= (lsr & (BI|FE|PE|OE));
-	return lsr | port->lsr;
-}
-
-static inline void SIR_UART_CLEAR_LSR(struct bfin_sir_port *port)
-{
-	port->lsr = 0;
-	bfin_read16(port->membase + OFFSET_LSR);
-}
-
-#define DRIVER_NAME "bfin_sir"
-
-static void bfin_sir_hw_init(void)
-{
-#ifdef CONFIG_BFIN_SIR0
-	peripheral_request(P_UART0_TX, DRIVER_NAME);
-	peripheral_request(P_UART0_RX, DRIVER_NAME);
-#endif
-
-#ifdef CONFIG_BFIN_SIR1
-	peripheral_request(P_UART1_TX, DRIVER_NAME);
-	peripheral_request(P_UART1_RX, DRIVER_NAME);
-#endif
-	SSYNC();
-}
diff --git a/include/asm-blackfin/mach-bf537/mem_init.h b/include/asm-blackfin/mach-bf537/mem_init.h
deleted file mode 100644
index 9ad979d416c6..000000000000
--- a/include/asm-blackfin/mach-bf537/mem_init.h
+++ /dev/null
@@ -1,330 +0,0 @@
-/*
- * File:         include/asm-blackfin/mach-bf537/mem_init.h
- * Based on:
- * Author:
- *
- * Created:
- * Description:
- *
- * Rev:
- *
- * Modified:
- *               Copyright 2004-2006 Analog Devices Inc.
- *
- * Bugs:         Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2, or (at your option)
- * any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; see the file COPYING.
- * If not, write to the Free Software Foundation,
- * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
- */
-
-#if (CONFIG_MEM_MT48LC16M16A2TG_75 || CONFIG_MEM_MT48LC64M4A2FB_7E || CONFIG_MEM_MT48LC16M8A2TG_75 || CONFIG_MEM_GENERIC_BOARD || CONFIG_MEM_MT48LC32M8A2_75)
-#if (CONFIG_SCLK_HZ > 119402985)
-#define SDRAM_tRP       TRP_2
-#define SDRAM_tRP_num   2
-#define SDRAM_tRAS      TRAS_7
-#define SDRAM_tRAS_num  7
-#define SDRAM_tRCD      TRCD_2
-#define SDRAM_tWR       TWR_2
-#endif
-#if (CONFIG_SCLK_HZ > 104477612) && (CONFIG_SCLK_HZ <= 119402985)
-#define SDRAM_tRP       TRP_2
-#define SDRAM_tRP_num   2
-#define SDRAM_tRAS      TRAS_6
-#define SDRAM_tRAS_num  6
-#define SDRAM_tRCD      TRCD_2
-#define SDRAM_tWR       TWR_2
-#endif
-#if (CONFIG_SCLK_HZ > 89552239) && (CONFIG_SCLK_HZ <= 104477612)
-#define SDRAM_tRP       TRP_2
-#define SDRAM_tRP_num   2
-#define SDRAM_tRAS      TRAS_5
-#define SDRAM_tRAS_num  5
-#define SDRAM_tRCD      TRCD_2
-#define SDRAM_tWR       TWR_2
-#endif
-#if (CONFIG_SCLK_HZ > 74626866) && (CONFIG_SCLK_HZ <= 89552239)
-#define SDRAM_tRP       TRP_2
-#define SDRAM_tRP_num   2
-#define SDRAM_tRAS      TRAS_4
-#define SDRAM_tRAS_num  4
-#define SDRAM_tRCD      TRCD_2
-#define SDRAM_tWR       TWR_2
-#endif
-#if (CONFIG_SCLK_HZ > 66666667) && (CONFIG_SCLK_HZ <= 74626866)
-#define SDRAM_tRP       TRP_2
-#define SDRAM_tRP_num   2
-#define SDRAM_tRAS      TRAS_3
-#define SDRAM_tRAS_num  3
-#define SDRAM_tRCD      TRCD_2
-#define SDRAM_tWR       TWR_2
-#endif
-#if (CONFIG_SCLK_HZ > 59701493) && (CONFIG_SCLK_HZ <= 66666667)
-#define SDRAM_tRP       TRP_1
-#define SDRAM_tRP_num   1
-#define SDRAM_tRAS      TRAS_4
-#define SDRAM_tRAS_num  3
-#define SDRAM_tRCD      TRCD_1
-#define SDRAM_tWR       TWR_2
-#endif
-#if (CONFIG_SCLK_HZ > 44776119) && (CONFIG_SCLK_HZ <= 59701493)
-#define SDRAM_tRP       TRP_1
-#define SDRAM_tRP_num   1
-#define SDRAM_tRAS      TRAS_3
-#define SDRAM_tRAS_num  3
-#define SDRAM_tRCD      TRCD_1
-#define SDRAM_tWR       TWR_2
-#endif
-#if (CONFIG_SCLK_HZ > 29850746) && (CONFIG_SCLK_HZ <= 44776119)
-#define SDRAM_tRP       TRP_1
-#define SDRAM_tRP_num   1
-#define SDRAM_tRAS      TRAS_2
-#define SDRAM_tRAS_num  2
-#define SDRAM_tRCD      TRCD_1
-#define SDRAM_tWR       TWR_2
-#endif
-#if (CONFIG_SCLK_HZ <= 29850746)
-#define SDRAM_tRP       TRP_1
-#define SDRAM_tRP_num   1
-#define SDRAM_tRAS      TRAS_1
-#define SDRAM_tRAS_num  1
-#define SDRAM_tRCD      TRCD_1
-#define SDRAM_tWR       TWR_2
-#endif
-#endif
-
-#if (CONFIG_MEM_MT48LC16M16A2TG_75)
-  /*SDRAM INFORMATION: */
-#define SDRAM_Tref  64		/* Refresh period in milliseconds   */
-#define SDRAM_NRA   8192	/* Number of row addresses in SDRAM */
-#define SDRAM_CL    CL_3
-#endif
-
-#if (CONFIG_MEM_MT48LC16M8A2TG_75)
-  /*SDRAM INFORMATION: */
-#define SDRAM_Tref  64		/* Refresh period in milliseconds   */
-#define SDRAM_NRA   4096	/* Number of row addresses in SDRAM */
-#define SDRAM_CL    CL_3
-#endif
-
-#if (CONFIG_MEM_MT48LC32M8A2_75)
-  /*SDRAM INFORMATION: */
-#define SDRAM_Tref  64		/* Refresh period in milliseconds   */
-#define SDRAM_NRA   8192	/* Number of row addresses in SDRAM */
-#define SDRAM_CL    CL_3
-#endif
-
-#if (CONFIG_MEM_MT48LC64M4A2FB_7E)
-  /*SDRAM INFORMATION: */
-#define SDRAM_Tref  64		/* Refresh period in milliseconds   */
-#define SDRAM_NRA   8192	/* Number of row addresses in SDRAM */
-#define SDRAM_CL    CL_3
-#endif
-
-#if (CONFIG_MEM_GENERIC_BOARD)
-  /*SDRAM INFORMATION: Modify this for your board */
-#define SDRAM_Tref  64		/* Refresh period in milliseconds   */
-#define SDRAM_NRA   8192	/* Number of row addresses in SDRAM */
-#define SDRAM_CL    CL_3
-#endif
-
-#if (CONFIG_MEM_SIZE == 128)
-#define SDRAM_SIZE      EBSZ_128
-#endif
-#if (CONFIG_MEM_SIZE == 64)
-#define SDRAM_SIZE      EBSZ_64
-#endif
-#if (CONFIG_MEM_SIZE == 32)
-#define SDRAM_SIZE      EBSZ_32
-#endif
-#if (CONFIG_MEM_SIZE == 16)
-#define SDRAM_SIZE      EBSZ_16
-#endif
-#if (CONFIG_MEM_ADD_WIDTH == 11)
-#define SDRAM_WIDTH     EBCAW_11
-#endif
-#if (CONFIG_MEM_ADD_WIDTH == 10)
-#define SDRAM_WIDTH     EBCAW_10
-#endif
-#if (CONFIG_MEM_ADD_WIDTH == 9)
-#define SDRAM_WIDTH     EBCAW_9
-#endif
-#if (CONFIG_MEM_ADD_WIDTH == 8)
-#define SDRAM_WIDTH     EBCAW_8
-#endif
-
-#define mem_SDBCTL      (SDRAM_WIDTH | SDRAM_SIZE | EBE)
-
-/* Equation from section 17 (p17-46) of BF533 HRM */
-#define mem_SDRRC       (((CONFIG_SCLK_HZ / 1000) * SDRAM_Tref) / SDRAM_NRA) - (SDRAM_tRAS_num + SDRAM_tRP_num)
-
-/* Enable SCLK Out */
-#define mem_SDGCTL        (SCTLE | SDRAM_CL | SDRAM_tRAS | SDRAM_tRP | SDRAM_tRCD | SDRAM_tWR | PSS)
-
-#if defined CONFIG_CLKIN_HALF
-#define CLKIN_HALF       1
-#else
-#define CLKIN_HALF       0
-#endif
-
-#if defined CONFIG_PLL_BYPASS
-#define PLL_BYPASS      1
-#else
-#define PLL_BYPASS       0
-#endif
-
-/***************************************Currently Not Being Used *********************************/
-#define flash_EBIU_AMBCTL_WAT  ((CONFIG_FLASH_SPEED_BWAT * 4) / (4000000000 / CONFIG_SCLK_HZ)) + 1
-#define flash_EBIU_AMBCTL_RAT  ((CONFIG_FLASH_SPEED_BRAT * 4) / (4000000000 / CONFIG_SCLK_HZ)) + 1
-#define flash_EBIU_AMBCTL_HT   ((CONFIG_FLASH_SPEED_BHT  * 4) / (4000000000 / CONFIG_SCLK_HZ))
-#define flash_EBIU_AMBCTL_ST   ((CONFIG_FLASH_SPEED_BST  * 4) / (4000000000 / CONFIG_SCLK_HZ)) + 1
-#define flash_EBIU_AMBCTL_TT   ((CONFIG_FLASH_SPEED_BTT  * 4) / (4000000000 / CONFIG_SCLK_HZ)) + 1
-
-#if (flash_EBIU_AMBCTL_TT > 3)
-#define flash_EBIU_AMBCTL0_TT   B0TT_4
-#endif
-#if (flash_EBIU_AMBCTL_TT == 3)
-#define flash_EBIU_AMBCTL0_TT   B0TT_3
-#endif
-#if (flash_EBIU_AMBCTL_TT == 2)
-#define flash_EBIU_AMBCTL0_TT   B0TT_2
-#endif
-#if (flash_EBIU_AMBCTL_TT < 2)
-#define flash_EBIU_AMBCTL0_TT   B0TT_1
-#endif
-
-#if (flash_EBIU_AMBCTL_ST > 3)
-#define flash_EBIU_AMBCTL0_ST   B0ST_4
-#endif
-#if (flash_EBIU_AMBCTL_ST == 3)
-#define flash_EBIU_AMBCTL0_ST   B0ST_3
-#endif
-#if (flash_EBIU_AMBCTL_ST == 2)
-#define flash_EBIU_AMBCTL0_ST   B0ST_2
-#endif
-#if (flash_EBIU_AMBCTL_ST < 2)
-#define flash_EBIU_AMBCTL0_ST   B0ST_1
-#endif
-
-#if (flash_EBIU_AMBCTL_HT > 2)
-#define flash_EBIU_AMBCTL0_HT   B0HT_3
-#endif
-#if (flash_EBIU_AMBCTL_HT == 2)
-#define flash_EBIU_AMBCTL0_HT   B0HT_2
-#endif
-#if (flash_EBIU_AMBCTL_HT == 1)
-#define flash_EBIU_AMBCTL0_HT   B0HT_1
-#endif
-#if (flash_EBIU_AMBCTL_HT == 0 && CONFIG_FLASH_SPEED_BHT == 0)
-#define flash_EBIU_AMBCTL0_HT   B0HT_0
-#endif
-#if (flash_EBIU_AMBCTL_HT == 0 && CONFIG_FLASH_SPEED_BHT != 0)
-#define flash_EBIU_AMBCTL0_HT   B0HT_1
-#endif
-
-#if (flash_EBIU_AMBCTL_WAT > 14)
-#define flash_EBIU_AMBCTL0_WAT  B0WAT_15
-#endif
-#if (flash_EBIU_AMBCTL_WAT == 14)
-#define flash_EBIU_AMBCTL0_WAT  B0WAT_14
-#endif
-#if (flash_EBIU_AMBCTL_WAT == 13)
-#define flash_EBIU_AMBCTL0_WAT  B0WAT_13
-#endif
-#if (flash_EBIU_AMBCTL_WAT == 12)
-#define flash_EBIU_AMBCTL0_WAT  B0WAT_12
-#endif
-#if (flash_EBIU_AMBCTL_WAT == 11)
-#define flash_EBIU_AMBCTL0_WAT  B0WAT_11
-#endif
-#if (flash_EBIU_AMBCTL_WAT == 10)
-#define flash_EBIU_AMBCTL0_WAT  B0WAT_10
-#endif
-#if (flash_EBIU_AMBCTL_WAT == 9)
-#define flash_EBIU_AMBCTL0_WAT  B0WAT_9
-#endif
-#if (flash_EBIU_AMBCTL_WAT == 8)
-#define flash_EBIU_AMBCTL0_WAT  B0WAT_8
-#endif
-#if (flash_EBIU_AMBCTL_WAT == 7)
-#define flash_EBIU_AMBCTL0_WAT  B0WAT_7
-#endif
-#if (flash_EBIU_AMBCTL_WAT == 6)
-#define flash_EBIU_AMBCTL0_WAT  B0WAT_6
-#endif
-#if (flash_EBIU_AMBCTL_WAT == 5)
-#define flash_EBIU_AMBCTL0_WAT  B0WAT_5
-#endif
-#if (flash_EBIU_AMBCTL_WAT == 4)
-#define flash_EBIU_AMBCTL0_WAT  B0WAT_4
-#endif
-#if (flash_EBIU_AMBCTL_WAT == 3)
-#define flash_EBIU_AMBCTL0_WAT  B0WAT_3
-#endif
-#if (flash_EBIU_AMBCTL_WAT == 2)
-#define flash_EBIU_AMBCTL0_WAT  B0WAT_2
-#endif
-#if (flash_EBIU_AMBCTL_WAT == 1)
-#define flash_EBIU_AMBCTL0_WAT  B0WAT_1
-#endif
-
-#if (flash_EBIU_AMBCTL_RAT > 14)
-#define flash_EBIU_AMBCTL0_RAT  B0RAT_15
-#endif
-#if (flash_EBIU_AMBCTL_RAT == 14)
-#define flash_EBIU_AMBCTL0_RAT  B0RAT_14
-#endif
-#if (flash_EBIU_AMBCTL_RAT == 13)
-#define flash_EBIU_AMBCTL0_RAT  B0RAT_13
-#endif
-#if (flash_EBIU_AMBCTL_RAT == 12)
-#define flash_EBIU_AMBCTL0_RAT  B0RAT_12
-#endif
-#if (flash_EBIU_AMBCTL_RAT == 11)
-#define flash_EBIU_AMBCTL0_RAT  B0RAT_11
-#endif
-#if (flash_EBIU_AMBCTL_RAT == 10)
-#define flash_EBIU_AMBCTL0_RAT  B0RAT_10
-#endif
-#if (flash_EBIU_AMBCTL_RAT == 9)
-#define flash_EBIU_AMBCTL0_RAT  B0RAT_9
-#endif
-#if (flash_EBIU_AMBCTL_RAT == 8)
-#define flash_EBIU_AMBCTL0_RAT  B0RAT_8
-#endif
-#if (flash_EBIU_AMBCTL_RAT == 7)
-#define flash_EBIU_AMBCTL0_RAT  B0RAT_7
-#endif
-#if (flash_EBIU_AMBCTL_RAT == 6)
-#define flash_EBIU_AMBCTL0_RAT  B0RAT_6
-#endif
-#if (flash_EBIU_AMBCTL_RAT == 5)
-#define flash_EBIU_AMBCTL0_RAT  B0RAT_5
-#endif
-#if (flash_EBIU_AMBCTL_RAT == 4)
-#define flash_EBIU_AMBCTL0_RAT  B0RAT_4
-#endif
-#if (flash_EBIU_AMBCTL_RAT == 3)
-#define flash_EBIU_AMBCTL0_RAT  B0RAT_3
-#endif
-#if (flash_EBIU_AMBCTL_RAT == 2)
-#define flash_EBIU_AMBCTL0_RAT  B0RAT_2
-#endif
-#if (flash_EBIU_AMBCTL_RAT == 1)
-#define flash_EBIU_AMBCTL0_RAT  B0RAT_1
-#endif
-
-#define flash_EBIU_AMBCTL0  \
-	(flash_EBIU_AMBCTL0_WAT | flash_EBIU_AMBCTL0_RAT | flash_EBIU_AMBCTL0_HT | \
-	 flash_EBIU_AMBCTL0_ST | flash_EBIU_AMBCTL0_TT | CONFIG_FLASH_SPEED_RDYEN)
diff --git a/include/asm-blackfin/mach-bf537/mem_map.h b/include/asm-blackfin/mach-bf537/mem_map.h
deleted file mode 100644
index 5c6726d6f3b1..000000000000
--- a/include/asm-blackfin/mach-bf537/mem_map.h
+++ /dev/null
@@ -1,174 +0,0 @@
-/*
- * file:         include/asm-blackfin/mach-bf537/mem_map.h
- * based on:
- * author:
- *
- * created:
- * description:
- *	Memory MAP Common header file for blackfin BF537/6/4 of processors.
- * rev:
- *
- * modified:
- *
- * bugs:         enter bugs at http://blackfin.uclinux.org/
- *
- * this program is free software; you can redistribute it and/or modify
- * it under the terms of the gnu general public license as published by
- * the free software foundation; either version 2, or (at your option)
- * any later version.
- *
- * this program is distributed in the hope that it will be useful,
- * but without any warranty; without even the implied warranty of
- * merchantability or fitness for a particular purpose.  see the
- * gnu general public license for more details.
- *
- * you should have received a copy of the gnu general public license
- * along with this program; see the file copying.
- * if not, write to the free software foundation,
- * 59 temple place - suite 330, boston, ma 02111-1307, usa.
- */
-
-#ifndef _MEM_MAP_537_H_
-#define _MEM_MAP_537_H_
-
-#define COREMMR_BASE           0xFFE00000	 /* Core MMRs */
-#define SYSMMR_BASE            0xFFC00000	 /* System MMRs */
-
-/* Async Memory Banks */
-#define ASYNC_BANK3_BASE	0x20300000	 /* Async Bank 3 */
-#define ASYNC_BANK3_SIZE	0x00100000	/* 1M */
-#define ASYNC_BANK2_BASE	0x20200000	 /* Async Bank 2 */
-#define ASYNC_BANK2_SIZE	0x00100000	/* 1M */
-#define ASYNC_BANK1_BASE	0x20100000	 /* Async Bank 1 */
-#define ASYNC_BANK1_SIZE	0x00100000	/* 1M */
-#define ASYNC_BANK0_BASE	0x20000000	 /* Async Bank 0 */
-#define ASYNC_BANK0_SIZE	0x00100000	/* 1M */
-
-/* Boot ROM Memory */
-
-#define BOOT_ROM_START		0xEF000000
-#define BOOT_ROM_LENGTH		0x800
-
-/* Level 1 Memory */
-
-/* Memory Map for ADSP-BF537 processors */
-
-#ifdef CONFIG_BFIN_ICACHE
-#define BFIN_ICACHESIZE	(16*1024)
-#else
-#define BFIN_ICACHESIZE	(0*1024)
-#endif
-
-
-#ifdef CONFIG_BF537
-#define L1_CODE_START       0xFFA00000
-#define L1_DATA_A_START     0xFF800000
-#define L1_DATA_B_START     0xFF900000
-
-#define L1_CODE_LENGTH      0xC000
-
-#ifdef CONFIG_BFIN_DCACHE
-
-#ifdef CONFIG_BFIN_DCACHE_BANKA
-#define DMEM_CNTR (ACACHE_BSRAM | ENDCPLB | PORT_PREF0)
-#define L1_DATA_A_LENGTH      (0x8000 - 0x4000)
-#define L1_DATA_B_LENGTH      0x8000
-#define BFIN_DCACHESIZE	(16*1024)
-#define BFIN_DSUPBANKS	1
-#else
-#define DMEM_CNTR (ACACHE_BCACHE | ENDCPLB | PORT_PREF0)
-#define L1_DATA_A_LENGTH      (0x8000 - 0x4000)
-#define L1_DATA_B_LENGTH      (0x8000 - 0x4000)
-#define BFIN_DCACHESIZE	(32*1024)
-#define BFIN_DSUPBANKS	2
-#endif
-
-#else
-#define DMEM_CNTR (ASRAM_BSRAM | ENDCPLB | PORT_PREF0)
-#define L1_DATA_A_LENGTH      0x8000
-#define L1_DATA_B_LENGTH      0x8000
-#define BFIN_DCACHESIZE	(0*1024)
-#define BFIN_DSUPBANKS	0
-#endif /*CONFIG_BFIN_DCACHE*/
-
-#endif /*CONFIG_BF537*/
-
-/* Memory Map for ADSP-BF536 processors */
-
-#ifdef CONFIG_BF536
-#define L1_CODE_START       0xFFA00000
-#define L1_DATA_A_START     0xFF804000
-#define L1_DATA_B_START     0xFF904000
-
-#define L1_CODE_LENGTH      0xC000
-
-
-#ifdef CONFIG_BFIN_DCACHE
-
-#ifdef CONFIG_BFIN_DCACHE_BANKA
-#define DMEM_CNTR (ACACHE_BSRAM | ENDCPLB | PORT_PREF0)
-#define L1_DATA_A_LENGTH      (0x4000 - 0x4000)
-#define L1_DATA_B_LENGTH      0x4000
-#define BFIN_DCACHESIZE	(16*1024)
-#define BFIN_DSUPBANKS	1
-
-#else
-#define DMEM_CNTR (ACACHE_BCACHE | ENDCPLB | PORT_PREF0)
-#define L1_DATA_A_LENGTH      (0x4000 - 0x4000)
-#define L1_DATA_B_LENGTH      (0x4000 - 0x4000)
-#define BFIN_DCACHESIZE	(32*1024)
-#define BFIN_DSUPBANKS	2
-#endif
-
-#else
-#define DMEM_CNTR (ASRAM_BSRAM | ENDCPLB | PORT_PREF0)
-#define L1_DATA_A_LENGTH      0x4000
-#define L1_DATA_B_LENGTH      0x4000
-#define BFIN_DCACHESIZE	(0*1024)
-#define BFIN_DSUPBANKS	0
-#endif /*CONFIG_BFIN_DCACHE*/
-
-#endif
-
-/* Memory Map for ADSP-BF534 processors */
-
-#ifdef CONFIG_BF534
-#define L1_CODE_START       0xFFA00000
-#define L1_DATA_A_START     0xFF800000
-#define L1_DATA_B_START     0xFF900000
-
-#define L1_CODE_LENGTH      0xC000
-
-#ifdef CONFIG_BFIN_DCACHE
-
-#ifdef CONFIG_BFIN_DCACHE_BANKA
-#define DMEM_CNTR (ACACHE_BSRAM | ENDCPLB | PORT_PREF0)
-#define L1_DATA_A_LENGTH      (0x8000 - 0x4000)
-#define L1_DATA_B_LENGTH      0x8000
-#define BFIN_DCACHESIZE	(16*1024)
-#define BFIN_DSUPBANKS	1
-
-#else
-#define DMEM_CNTR (ACACHE_BCACHE | ENDCPLB | PORT_PREF0)
-#define L1_DATA_A_LENGTH      (0x8000 - 0x4000)
-#define L1_DATA_B_LENGTH      (0x8000 - 0x4000)
-#define BFIN_DCACHESIZE	(32*1024)
-#define BFIN_DSUPBANKS	2
-#endif
-
-#else
-#define DMEM_CNTR (ASRAM_BSRAM | ENDCPLB | PORT_PREF0)
-#define L1_DATA_A_LENGTH      0x8000
-#define L1_DATA_B_LENGTH      0x8000
-#define BFIN_DCACHESIZE	(0*1024)
-#define BFIN_DSUPBANKS	0
-#endif /*CONFIG_BFIN_DCACHE*/
-
-#endif
-
-/* Scratch Pad Memory */
-
-#define L1_SCRATCH_START	0xFFB00000
-#define L1_SCRATCH_LENGTH	0x1000
-
-#endif				/* _MEM_MAP_537_H_ */
diff --git a/include/asm-blackfin/mach-bf548/bfin_sir.h b/include/asm-blackfin/mach-bf548/bfin_sir.h
deleted file mode 100644
index 5e94271c7e3b..000000000000
--- a/include/asm-blackfin/mach-bf548/bfin_sir.h
+++ /dev/null
@@ -1,149 +0,0 @@
-/*
- * Blackfin Infra-red Driver
- *
- * Copyright 2006-2008 Analog Devices Inc.
- *
- * Enter bugs at http://blackfin.uclinux.org/
- *
- * Licensed under the GPL-2 or later.
- *
- */
-
-#include <linux/serial.h>
-#include <asm/dma.h>
-#include <asm/portmux.h>
-
-#define SIR_UART_GET_CHAR(port)   bfin_read16((port)->membase + OFFSET_RBR)
-#define SIR_UART_GET_DLL(port)    bfin_read16((port)->membase + OFFSET_DLL)
-#define SIR_UART_GET_IER(port)    bfin_read16((port)->membase + OFFSET_IER_SET)
-#define SIR_UART_GET_DLH(port)    bfin_read16((port)->membase + OFFSET_DLH)
-#define SIR_UART_GET_LCR(port)    bfin_read16((port)->membase + OFFSET_LCR)
-#define SIR_UART_GET_LSR(port)    bfin_read16((port)->membase + OFFSET_LSR)
-#define SIR_UART_GET_GCTL(port)   bfin_read16((port)->membase + OFFSET_GCTL)
-
-#define SIR_UART_PUT_CHAR(port, v) bfin_write16(((port)->membase + OFFSET_THR), v)
-#define SIR_UART_PUT_DLL(port, v)  bfin_write16(((port)->membase + OFFSET_DLL), v)
-#define SIR_UART_SET_IER(port, v)  bfin_write16(((port)->membase + OFFSET_IER_SET), v)
-#define SIR_UART_CLEAR_IER(port, v)  bfin_write16(((port)->membase + OFFSET_IER_CLEAR), v)
-#define SIR_UART_PUT_DLH(port, v)  bfin_write16(((port)->membase + OFFSET_DLH), v)
-#define SIR_UART_PUT_LSR(port, v)  bfin_write16(((port)->membase + OFFSET_LSR), v)
-#define SIR_UART_PUT_LCR(port, v)  bfin_write16(((port)->membase + OFFSET_LCR), v)
-#define SIR_UART_CLEAR_LSR(port)  bfin_write16(((port)->membase + OFFSET_LSR), -1)
-#define SIR_UART_PUT_GCTL(port, v) bfin_write16(((port)->membase + OFFSET_GCTL), v)
-
-#ifdef CONFIG_SIR_BFIN_DMA
-struct dma_rx_buf {
-	char *buf;
-	int head;
-	int tail;
-	};
-#endif /* CONFIG_SIR_BFIN_DMA */
-
-struct bfin_sir_port {
-	unsigned char __iomem   *membase;
-	unsigned int            irq;
-	unsigned int            lsr;
-	unsigned long           clk;
-	struct net_device       *dev;
-#ifdef CONFIG_SIR_BFIN_DMA
-	int                     tx_done;
-	struct dma_rx_buf       rx_dma_buf;
-	struct timer_list       rx_dma_timer;
-	int                     rx_dma_nrows;
-#endif /* CONFIG_SIR_BFIN_DMA */
-	unsigned int            tx_dma_channel;
-	unsigned int            rx_dma_channel;
-};
-
-struct bfin_sir_port sir_ports[BFIN_UART_NR_PORTS];
-
-struct bfin_sir_port_res {
-	unsigned long   base_addr;
-	int             irq;
-	unsigned int    rx_dma_channel;
-	unsigned int    tx_dma_channel;
-};
-
-struct bfin_sir_port_res bfin_sir_port_resource[] = {
-#ifdef CONFIG_BFIN_SIR0
-	{
-	0xFFC00400,
-	IRQ_UART0_RX,
-	CH_UART0_RX,
-	CH_UART0_TX,
-	},
-#endif
-#ifdef CONFIG_BFIN_SIR1
-	{
-	0xFFC02000,
-	IRQ_UART1_RX,
-	CH_UART1_RX,
-	CH_UART1_TX,
-	},
-#endif
-#ifdef CONFIG_BFIN_SIR2
-	{
-	0xFFC02100,
-	IRQ_UART2_RX,
-	CH_UART2_RX,
-	CH_UART2_TX,
-	},
-#endif
-#ifdef CONFIG_BFIN_SIR3
-	{
-	0xFFC03100,
-	IRQ_UART3_RX,
-	CH_UART3_RX,
-	CH_UART3_TX,
-	},
-#endif
-};
-
-int nr_sirs = ARRAY_SIZE(bfin_sir_port_resource);
-
-struct bfin_sir_self {
-	struct bfin_sir_port    *sir_port;
-	spinlock_t              lock;
-	unsigned int            open;
-	int                     speed;
-	int                     newspeed;
-
-	struct sk_buff          *txskb;
-	struct sk_buff          *rxskb;
-	struct net_device_stats stats;
-	struct device           *dev;
-	struct irlap_cb         *irlap;
-	struct qos_info         qos;
-
-	iobuff_t                tx_buff;
-	iobuff_t                rx_buff;
-
-	struct work_struct      work;
-	int                     mtt;
-};
-
-#define DRIVER_NAME "bfin_sir"
-
-static void bfin_sir_hw_init(void)
-{
-#ifdef CONFIG_BFIN_SIR0
-	peripheral_request(P_UART0_TX, DRIVER_NAME);
-	peripheral_request(P_UART0_RX, DRIVER_NAME);
-#endif
-
-#ifdef CONFIG_BFIN_SIR1
-	peripheral_request(P_UART1_TX, DRIVER_NAME);
-	peripheral_request(P_UART1_RX, DRIVER_NAME);
-#endif
-
-#ifdef CONFIG_BFIN_SIR2
-	peripheral_request(P_UART2_TX, DRIVER_NAME);
-	peripheral_request(P_UART2_RX, DRIVER_NAME);
-#endif
-
-#ifdef CONFIG_BFIN_SIR3
-	peripheral_request(P_UART3_TX, DRIVER_NAME);
-	peripheral_request(P_UART3_RX, DRIVER_NAME);
-#endif
-	SSYNC();
-}
diff --git a/include/asm-blackfin/mach-bf548/gpio.h b/include/asm-blackfin/mach-bf548/gpio.h
deleted file mode 100644
index cb8b0f15c9a6..000000000000
--- a/include/asm-blackfin/mach-bf548/gpio.h
+++ /dev/null
@@ -1,211 +0,0 @@
-/*
- * File:         include/asm-blackfin/mach-bf548/gpio.h
- * Based on:
- * Author:	 Michael Hennerich (hennerich@blackfin.uclinux.org)
- *
- * Created:
- * Description:
- *
- * Modified:
- *               Copyright 2004-2007 Analog Devices Inc.
- *
- * Bugs:         Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, see the file COPYING, or write
- * to the Free Software Foundation, Inc.,
- * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
- */
-
-
-
-#define GPIO_PA0	0
-#define GPIO_PA1	1
-#define GPIO_PA2	2
-#define GPIO_PA3	3
-#define GPIO_PA4	4
-#define GPIO_PA5	5
-#define GPIO_PA6	6
-#define GPIO_PA7	7
-#define GPIO_PA8	8
-#define GPIO_PA9	9
-#define GPIO_PA10	10
-#define GPIO_PA11	11
-#define GPIO_PA12	12
-#define GPIO_PA13	13
-#define GPIO_PA14	14
-#define GPIO_PA15	15
-#define GPIO_PB0	16
-#define GPIO_PB1	17
-#define GPIO_PB2	18
-#define GPIO_PB3	19
-#define GPIO_PB4	20
-#define GPIO_PB5	21
-#define GPIO_PB6	22
-#define GPIO_PB7	23
-#define GPIO_PB8	24
-#define GPIO_PB9	25
-#define GPIO_PB10	26
-#define GPIO_PB11	27
-#define GPIO_PB12	28
-#define GPIO_PB13	29
-#define GPIO_PB14	30
-#define GPIO_PB15	31	/* N/A */
-#define GPIO_PC0	32
-#define GPIO_PC1	33
-#define GPIO_PC2	34
-#define GPIO_PC3	35
-#define GPIO_PC4	36
-#define GPIO_PC5	37
-#define GPIO_PC6	38
-#define GPIO_PC7	39
-#define GPIO_PC8	40
-#define GPIO_PC9	41
-#define GPIO_PC10	42
-#define GPIO_PC11	43
-#define GPIO_PC12	44
-#define GPIO_PC13	45
-#define GPIO_PC14	46	/* N/A */
-#define GPIO_PC15	47	/* N/A */
-#define GPIO_PD0	48
-#define GPIO_PD1	49
-#define GPIO_PD2	50
-#define GPIO_PD3	51
-#define GPIO_PD4	52
-#define GPIO_PD5	53
-#define GPIO_PD6	54
-#define GPIO_PD7	55
-#define GPIO_PD8	56
-#define GPIO_PD9	57
-#define GPIO_PD10	58
-#define GPIO_PD11	59
-#define GPIO_PD12	60
-#define GPIO_PD13	61
-#define GPIO_PD14	62
-#define GPIO_PD15	63
-#define GPIO_PE0	64
-#define GPIO_PE1	65
-#define GPIO_PE2	66
-#define GPIO_PE3	67
-#define GPIO_PE4	68
-#define GPIO_PE5	69
-#define GPIO_PE6	70
-#define GPIO_PE7	71
-#define GPIO_PE8	72
-#define GPIO_PE9	73
-#define GPIO_PE10	74
-#define GPIO_PE11	75
-#define GPIO_PE12	76
-#define GPIO_PE13	77
-#define GPIO_PE14	78
-#define GPIO_PE15	79
-#define GPIO_PF0	80
-#define GPIO_PF1	81
-#define GPIO_PF2	82
-#define GPIO_PF3	83
-#define GPIO_PF4	84
-#define GPIO_PF5	85
-#define GPIO_PF6	86
-#define GPIO_PF7	87
-#define GPIO_PF8	88
-#define GPIO_PF9	89
-#define GPIO_PF10	90
-#define GPIO_PF11	91
-#define GPIO_PF12	92
-#define GPIO_PF13	93
-#define GPIO_PF14	94
-#define GPIO_PF15	95
-#define GPIO_PG0	96
-#define GPIO_PG1	97
-#define GPIO_PG2	98
-#define GPIO_PG3	99
-#define GPIO_PG4	100
-#define GPIO_PG5	101
-#define GPIO_PG6	102
-#define GPIO_PG7	103
-#define GPIO_PG8	104
-#define GPIO_PG9	105
-#define GPIO_PG10	106
-#define GPIO_PG11	107
-#define GPIO_PG12	108
-#define GPIO_PG13	109
-#define GPIO_PG14	110
-#define GPIO_PG15	111
-#define GPIO_PH0	112
-#define GPIO_PH1	113
-#define GPIO_PH2	114
-#define GPIO_PH3	115
-#define GPIO_PH4	116
-#define GPIO_PH5	117
-#define GPIO_PH6	118
-#define GPIO_PH7	119
-#define GPIO_PH8	120
-#define GPIO_PH9	121
-#define GPIO_PH10	122
-#define GPIO_PH11	123
-#define GPIO_PH12	124
-#define GPIO_PH13	125
-#define GPIO_PH14	126	/* N/A */
-#define GPIO_PH15	127	/* N/A */
-#define GPIO_PI0	128
-#define GPIO_PI1	129
-#define GPIO_PI2	130
-#define GPIO_PI3	131
-#define GPIO_PI4	132
-#define GPIO_PI5	133
-#define GPIO_PI6	134
-#define GPIO_PI7	135
-#define GPIO_PI8	136
-#define GPIO_PI9	137
-#define GPIO_PI10	138
-#define GPIO_PI11	139
-#define GPIO_PI12	140
-#define GPIO_PI13	141
-#define GPIO_PI14	142
-#define GPIO_PI15	143
-#define GPIO_PJ0	144
-#define GPIO_PJ1	145
-#define GPIO_PJ2	146
-#define GPIO_PJ3	147
-#define GPIO_PJ4	148
-#define GPIO_PJ5	149
-#define GPIO_PJ6	150
-#define GPIO_PJ7	151
-#define GPIO_PJ8	152
-#define GPIO_PJ9	153
-#define GPIO_PJ10	154
-#define GPIO_PJ11	155
-#define GPIO_PJ12	156
-#define GPIO_PJ13	157
-#define GPIO_PJ14	158	/* N/A */
-#define GPIO_PJ15	159	/* N/A */
-
-#define MAX_BLACKFIN_GPIOS 160
-
-struct gpio_port_t {
-	unsigned short port_fer;
-	unsigned short dummy1;
-	unsigned short port_data;
-	unsigned short dummy2;
-	unsigned short port_set;
-	unsigned short dummy3;
-	unsigned short port_clear;
-	unsigned short dummy4;
-	unsigned short port_dir_set;
-	unsigned short dummy5;
-	unsigned short port_dir_clear;
-	unsigned short dummy6;
-	unsigned short port_inen;
-	unsigned short dummy7;
-	unsigned int port_mux;
-};
diff --git a/include/asm-blackfin/mach-bf561/bfin_sir.h b/include/asm-blackfin/mach-bf561/bfin_sir.h
deleted file mode 100644
index cefcf8bb505b..000000000000
--- a/include/asm-blackfin/mach-bf561/bfin_sir.h
+++ /dev/null
@@ -1,120 +0,0 @@
-/*
- * Blackfin Infra-red Driver
- *
- * Copyright 2006-2008 Analog Devices Inc.
- *
- * Enter bugs at http://blackfin.uclinux.org/
- *
- * Licensed under the GPL-2 or later.
- *
- */
-
-#include <linux/serial.h>
-#include <asm/dma.h>
-#include <asm/portmux.h>
-
-#define SIR_UART_GET_CHAR(port)   bfin_read16((port)->membase + OFFSET_RBR)
-#define SIR_UART_GET_DLL(port)    bfin_read16((port)->membase + OFFSET_DLL)
-#define SIR_UART_GET_IER(port)    bfin_read16((port)->membase + OFFSET_IER)
-#define SIR_UART_GET_DLH(port)    bfin_read16((port)->membase + OFFSET_DLH)
-#define SIR_UART_GET_IIR(port)    bfin_read16((port)->membase + OFFSET_IIR)
-#define SIR_UART_GET_LCR(port)    bfin_read16((port)->membase + OFFSET_LCR)
-#define SIR_UART_GET_GCTL(port)   bfin_read16((port)->membase + OFFSET_GCTL)
-
-#define SIR_UART_PUT_CHAR(port, v) bfin_write16(((port)->membase + OFFSET_THR), v)
-#define SIR_UART_PUT_DLL(port, v)  bfin_write16(((port)->membase + OFFSET_DLL), v)
-#define SIR_UART_PUT_IER(port, v)  bfin_write16(((port)->membase + OFFSET_IER), v)
-#define SIR_UART_PUT_DLH(port, v)  bfin_write16(((port)->membase + OFFSET_DLH), v)
-#define SIR_UART_PUT_LCR(port, v)  bfin_write16(((port)->membase + OFFSET_LCR), v)
-#define SIR_UART_PUT_GCTL(port, v) bfin_write16(((port)->membase + OFFSET_GCTL), v)
-
-#ifdef CONFIG_SIR_BFIN_DMA
-struct dma_rx_buf {
-	char *buf;
-	int head;
-	int tail;
-	};
-#endif /* CONFIG_SIR_BFIN_DMA */
-
-struct bfin_sir_port {
-	unsigned char __iomem   *membase;
-	unsigned int            irq;
-	unsigned int            lsr;
-	unsigned long           clk;
-	struct net_device       *dev;
-#ifdef CONFIG_SIR_BFIN_DMA
-	int                     tx_done;
-	struct dma_rx_buf       rx_dma_buf;
-	struct timer_list       rx_dma_timer;
-	int                     rx_dma_nrows;
-#endif /* CONFIG_SIR_BFIN_DMA */
-	unsigned int            tx_dma_channel;
-	unsigned int            rx_dma_channel;
-};
-
-struct bfin_sir_port sir_ports[BFIN_UART_NR_PORTS];
-
-struct bfin_sir_port_res {
-	unsigned long   base_addr;
-	int             irq;
-	unsigned int    rx_dma_channel;
-	unsigned int    tx_dma_channel;
-};
-
-struct bfin_sir_port_res bfin_sir_port_resource[] = {
-#ifdef CONFIG_BFIN_SIR0
-	{
-	0xFFC00400,
-	IRQ_UART_RX,
-	CH_UART_RX,
-	CH_UART_TX,
-	},
-#endif
-};
-
-int nr_sirs = ARRAY_SIZE(bfin_sir_port_resource);
-
-struct bfin_sir_self {
-	struct bfin_sir_port    *sir_port;
-	spinlock_t              lock;
-	unsigned int            open;
-	int                     speed;
-	int                     newspeed;
-
-	struct sk_buff          *txskb;
-	struct sk_buff          *rxskb;
-	struct net_device_stats stats;
-	struct device           *dev;
-	struct irlap_cb         *irlap;
-	struct qos_info         qos;
-
-	iobuff_t                tx_buff;
-	iobuff_t                rx_buff;
-
-	struct work_struct      work;
-	int                     mtt;
-};
-
-static inline unsigned int SIR_UART_GET_LSR(struct bfin_sir_port *port)
-{
-	unsigned int lsr = bfin_read16(port->membase + OFFSET_LSR);
-	port->lsr |= (lsr & (BI|FE|PE|OE));
-	return lsr | port->lsr;
-}
-
-static inline void SIR_UART_CLEAR_LSR(struct bfin_sir_port *port)
-{
-	port->lsr = 0;
-	bfin_read16(port->membase + OFFSET_LSR);
-}
-
-#define DRIVER_NAME "bfin_sir"
-
-static void bfin_sir_hw_init(void)
-{
-#ifdef CONFIG_BFIN_SIR0
-	peripheral_request(P_UART0_TX, DRIVER_NAME);
-	peripheral_request(P_UART0_RX, DRIVER_NAME);
-#endif
-	SSYNC();
-}
diff --git a/include/asm-blackfin/mach-bf561/mem_init.h b/include/asm-blackfin/mach-bf561/mem_init.h
deleted file mode 100644
index 439a5895b346..000000000000
--- a/include/asm-blackfin/mach-bf561/mem_init.h
+++ /dev/null
@@ -1,322 +0,0 @@
-/*
- * File:         include/asm-blackfin/mach-bf561/mem_init.h
- * Based on:
- * Author:
- *
- * Created:
- * Description:
- *
- * Rev:
- *
- * Modified:
- *
- * Bugs:         Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2, or (at your option)
- * any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; see the file COPYING.
- * If not, write to the Free Software Foundation,
- * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
- */
-
-#if (CONFIG_MEM_MT48LC16M16A2TG_75 || CONFIG_MEM_MT48LC64M4A2FB_7E || CONFIG_MEM_GENERIC_BOARD || CONFIG_MEM_MT48LC8M32B2B5_7)
-#if (CONFIG_SCLK_HZ > 119402985)
-#define SDRAM_tRP       TRP_2
-#define SDRAM_tRP_num   2
-#define SDRAM_tRAS      TRAS_7
-#define SDRAM_tRAS_num  7
-#define SDRAM_tRCD      TRCD_2
-#define SDRAM_tWR       TWR_2
-#endif
-#if (CONFIG_SCLK_HZ > 104477612) && (CONFIG_SCLK_HZ <= 119402985)
-#define SDRAM_tRP       TRP_2
-#define SDRAM_tRP_num   2
-#define SDRAM_tRAS      TRAS_6
-#define SDRAM_tRAS_num  6
-#define SDRAM_tRCD      TRCD_2
-#define SDRAM_tWR       TWR_2
-#endif
-#if (CONFIG_SCLK_HZ > 89552239) && (CONFIG_SCLK_HZ <= 104477612)
-#define SDRAM_tRP       TRP_2
-#define SDRAM_tRP_num   2
-#define SDRAM_tRAS      TRAS_5
-#define SDRAM_tRAS_num  5
-#define SDRAM_tRCD      TRCD_2
-#define SDRAM_tWR       TWR_2
-#endif
-#if (CONFIG_SCLK_HZ > 74626866) && (CONFIG_SCLK_HZ <= 89552239)
-#define SDRAM_tRP       TRP_2
-#define SDRAM_tRP_num   2
-#define SDRAM_tRAS      TRAS_4
-#define SDRAM_tRAS_num  4
-#define SDRAM_tRCD      TRCD_2
-#define SDRAM_tWR       TWR_2
-#endif
-#if (CONFIG_SCLK_HZ > 66666667) && (CONFIG_SCLK_HZ <= 74626866)
-#define SDRAM_tRP       TRP_2
-#define SDRAM_tRP_num   2
-#define SDRAM_tRAS      TRAS_3
-#define SDRAM_tRAS_num  3
-#define SDRAM_tRCD      TRCD_2
-#define SDRAM_tWR       TWR_2
-#endif
-#if (CONFIG_SCLK_HZ > 59701493) && (CONFIG_SCLK_HZ <= 66666667)
-#define SDRAM_tRP       TRP_1
-#define SDRAM_tRP_num   1
-#define SDRAM_tRAS      TRAS_4
-#define SDRAM_tRAS_num  3
-#define SDRAM_tRCD      TRCD_1
-#define SDRAM_tWR       TWR_2
-#endif
-#if (CONFIG_SCLK_HZ > 44776119) && (CONFIG_SCLK_HZ <= 59701493)
-#define SDRAM_tRP       TRP_1
-#define SDRAM_tRP_num   1
-#define SDRAM_tRAS      TRAS_3
-#define SDRAM_tRAS_num  3
-#define SDRAM_tRCD      TRCD_1
-#define SDRAM_tWR       TWR_2
-#endif
-#if (CONFIG_SCLK_HZ > 29850746) && (CONFIG_SCLK_HZ <= 44776119)
-#define SDRAM_tRP       TRP_1
-#define SDRAM_tRP_num   1
-#define SDRAM_tRAS      TRAS_2
-#define SDRAM_tRAS_num  2
-#define SDRAM_tRCD      TRCD_1
-#define SDRAM_tWR       TWR_2
-#endif
-#if (CONFIG_SCLK_HZ <= 29850746)
-#define SDRAM_tRP       TRP_1
-#define SDRAM_tRP_num   1
-#define SDRAM_tRAS      TRAS_1
-#define SDRAM_tRAS_num  1
-#define SDRAM_tRCD      TRCD_1
-#define SDRAM_tWR       TWR_2
-#endif
-#endif
-
-#if (CONFIG_MEM_MT48LC16M16A2TG_75)
-  /*SDRAM INFORMATION: */
-#define SDRAM_Tref  64		/* Refresh period in milliseconds   */
-#define SDRAM_NRA   8192	/* Number of row addresses in SDRAM */
-#define SDRAM_CL    CL_3
-#endif
-
-#if (CONFIG_MEM_MT48LC64M4A2FB_7E)
-  /*SDRAM INFORMATION: */
-#define SDRAM_Tref  64		/* Refresh period in milliseconds   */
-#define SDRAM_NRA   8192	/* Number of row addresses in SDRAM */
-#define SDRAM_CL    CL_3
-#endif
-
-#if (CONFIG_MEM_MT48LC8M32B2B5_7)
-  /*SDRAM INFORMATION: */
-#define SDRAM_Tref  64		/* Refresh period in milliseconds   */
-#define SDRAM_NRA   4096	/* Number of row addresses in SDRAM */
-#define SDRAM_CL    CL_3
-#endif
-
-#if (CONFIG_MEM_GENERIC_BOARD)
-  /*SDRAM INFORMATION: Modify this for your board */
-#define SDRAM_Tref  64		/* Refresh period in milliseconds   */
-#define SDRAM_NRA   8192	/* Number of row addresses in SDRAM */
-#define SDRAM_CL    CL_3
-#endif
-
-#if (CONFIG_MEM_SIZE == 128)
-#define SDRAM_SIZE      EB0_SZ_128
-#endif
-#if (CONFIG_MEM_SIZE == 64)
-#define SDRAM_SIZE      EB0_SZ_64
-#endif
-#if ( CONFIG_MEM_SIZE == 32)
-#define SDRAM_SIZE      EB0_SZ_32
-#endif
-#if (CONFIG_MEM_SIZE == 16)
-#define SDRAM_SIZE      EB0_SZ_16
-#endif
-#if (CONFIG_MEM_ADD_WIDTH == 11)
-#define SDRAM_WIDTH     EB0_CAW_11
-#endif
-#if (CONFIG_MEM_ADD_WIDTH == 10)
-#define SDRAM_WIDTH     EB0_CAW_10
-#endif
-#if (CONFIG_MEM_ADD_WIDTH == 9)
-#define SDRAM_WIDTH     EB0_CAW_9
-#endif
-#if (CONFIG_MEM_ADD_WIDTH == 8)
-#define SDRAM_WIDTH     EB0_CAW_8
-#endif
-
-#define mem_SDBCTL      (SDRAM_WIDTH | SDRAM_SIZE | EB0_E)
-
-/* Equation from section 17 (p17-46) of BF533 HRM */
-#define mem_SDRRC       (((CONFIG_SCLK_HZ / 1000) * SDRAM_Tref) / SDRAM_NRA) - (SDRAM_tRAS_num + SDRAM_tRP_num)
-
-/* Enable SCLK Out */
-#define mem_SDGCTL        (SCTLE | SDRAM_CL | SDRAM_tRAS | SDRAM_tRP | SDRAM_tRCD | SDRAM_tWR | PSS)
-
-#if defined CONFIG_CLKIN_HALF
-#define CLKIN_HALF       1
-#else
-#define CLKIN_HALF       0
-#endif
-
-#if defined CONFIG_PLL_BYPASS
-#define PLL_BYPASS      1
-#else
-#define PLL_BYPASS       0
-#endif
-
-/***************************************Currently Not Being Used *********************************/
-#define flash_EBIU_AMBCTL_WAT  ((CONFIG_FLASH_SPEED_BWAT * 4) / (4000000000 / CONFIG_SCLK_HZ)) + 1
-#define flash_EBIU_AMBCTL_RAT  ((CONFIG_FLASH_SPEED_BRAT * 4) / (4000000000 / CONFIG_SCLK_HZ)) + 1
-#define flash_EBIU_AMBCTL_HT   ((CONFIG_FLASH_SPEED_BHT  * 4) / (4000000000 / CONFIG_SCLK_HZ))
-#define flash_EBIU_AMBCTL_ST   ((CONFIG_FLASH_SPEED_BST  * 4) / (4000000000 / CONFIG_SCLK_HZ)) + 1
-#define flash_EBIU_AMBCTL_TT   ((CONFIG_FLASH_SPEED_BTT  * 4) / (4000000000 / CONFIG_SCLK_HZ)) + 1
-
-#if (flash_EBIU_AMBCTL_TT > 3)
-#define flash_EBIU_AMBCTL0_TT   B0TT_4
-#endif
-#if (flash_EBIU_AMBCTL_TT == 3)
-#define flash_EBIU_AMBCTL0_TT   B0TT_3
-#endif
-#if (flash_EBIU_AMBCTL_TT == 2)
-#define flash_EBIU_AMBCTL0_TT   B0TT_2
-#endif
-#if (flash_EBIU_AMBCTL_TT < 2)
-#define flash_EBIU_AMBCTL0_TT   B0TT_1
-#endif
-
-#if (flash_EBIU_AMBCTL_ST > 3)
-#define flash_EBIU_AMBCTL0_ST   B0ST_4
-#endif
-#if (flash_EBIU_AMBCTL_ST == 3)
-#define flash_EBIU_AMBCTL0_ST   B0ST_3
-#endif
-#if (flash_EBIU_AMBCTL_ST == 2)
-#define flash_EBIU_AMBCTL0_ST   B0ST_2
-#endif
-#if (flash_EBIU_AMBCTL_ST < 2)
-#define flash_EBIU_AMBCTL0_ST   B0ST_1
-#endif
-
-#if (flash_EBIU_AMBCTL_HT > 2)
-#define flash_EBIU_AMBCTL0_HT   B0HT_3
-#endif
-#if (flash_EBIU_AMBCTL_HT == 2)
-#define flash_EBIU_AMBCTL0_HT   B0HT_2
-#endif
-#if (flash_EBIU_AMBCTL_HT == 1)
-#define flash_EBIU_AMBCTL0_HT   B0HT_1
-#endif
-#if (flash_EBIU_AMBCTL_HT == 0 && CONFIG_FLASH_SPEED_BHT == 0)
-#define flash_EBIU_AMBCTL0_HT   B0HT_0
-#endif
-#if (flash_EBIU_AMBCTL_HT == 0 && CONFIG_FLASH_SPEED_BHT != 0)
-#define flash_EBIU_AMBCTL0_HT   B0HT_1
-#endif
-
-#if (flash_EBIU_AMBCTL_WAT > 14)
-#define flash_EBIU_AMBCTL0_WAT  B0WAT_15
-#endif
-#if (flash_EBIU_AMBCTL_WAT == 14)
-#define flash_EBIU_AMBCTL0_WAT  B0WAT_14
-#endif
-#if (flash_EBIU_AMBCTL_WAT == 13)
-#define flash_EBIU_AMBCTL0_WAT  B0WAT_13
-#endif
-#if (flash_EBIU_AMBCTL_WAT == 12)
-#define flash_EBIU_AMBCTL0_WAT  B0WAT_12
-#endif
-#if (flash_EBIU_AMBCTL_WAT == 11)
-#define flash_EBIU_AMBCTL0_WAT  B0WAT_11
-#endif
-#if (flash_EBIU_AMBCTL_WAT == 10)
-#define flash_EBIU_AMBCTL0_WAT  B0WAT_10
-#endif
-#if (flash_EBIU_AMBCTL_WAT == 9)
-#define flash_EBIU_AMBCTL0_WAT  B0WAT_9
-#endif
-#if (flash_EBIU_AMBCTL_WAT == 8)
-#define flash_EBIU_AMBCTL0_WAT  B0WAT_8
-#endif
-#if (flash_EBIU_AMBCTL_WAT == 7)
-#define flash_EBIU_AMBCTL0_WAT  B0WAT_7
-#endif
-#if (flash_EBIU_AMBCTL_WAT == 6)
-#define flash_EBIU_AMBCTL0_WAT  B0WAT_6
-#endif
-#if (flash_EBIU_AMBCTL_WAT == 5)
-#define flash_EBIU_AMBCTL0_WAT  B0WAT_5
-#endif
-#if (flash_EBIU_AMBCTL_WAT == 4)
-#define flash_EBIU_AMBCTL0_WAT  B0WAT_4
-#endif
-#if (flash_EBIU_AMBCTL_WAT == 3)
-#define flash_EBIU_AMBCTL0_WAT  B0WAT_3
-#endif
-#if (flash_EBIU_AMBCTL_WAT == 2)
-#define flash_EBIU_AMBCTL0_WAT  B0WAT_2
-#endif
-#if (flash_EBIU_AMBCTL_WAT == 1)
-#define flash_EBIU_AMBCTL0_WAT  B0WAT_1
-#endif
-
-#if (flash_EBIU_AMBCTL_RAT > 14)
-#define flash_EBIU_AMBCTL0_RAT  B0RAT_15
-#endif
-#if (flash_EBIU_AMBCTL_RAT == 14)
-#define flash_EBIU_AMBCTL0_RAT  B0RAT_14
-#endif
-#if (flash_EBIU_AMBCTL_RAT == 13)
-#define flash_EBIU_AMBCTL0_RAT  B0RAT_13
-#endif
-#if (flash_EBIU_AMBCTL_RAT == 12)
-#define flash_EBIU_AMBCTL0_RAT  B0RAT_12
-#endif
-#if (flash_EBIU_AMBCTL_RAT == 11)
-#define flash_EBIU_AMBCTL0_RAT  B0RAT_11
-#endif
-#if (flash_EBIU_AMBCTL_RAT == 10)
-#define flash_EBIU_AMBCTL0_RAT  B0RAT_10
-#endif
-#if (flash_EBIU_AMBCTL_RAT == 9)
-#define flash_EBIU_AMBCTL0_RAT  B0RAT_9
-#endif
-#if (flash_EBIU_AMBCTL_RAT == 8)
-#define flash_EBIU_AMBCTL0_RAT  B0RAT_8
-#endif
-#if (flash_EBIU_AMBCTL_RAT == 7)
-#define flash_EBIU_AMBCTL0_RAT  B0RAT_7
-#endif
-#if (flash_EBIU_AMBCTL_RAT == 6)
-#define flash_EBIU_AMBCTL0_RAT  B0RAT_6
-#endif
-#if (flash_EBIU_AMBCTL_RAT == 5)
-#define flash_EBIU_AMBCTL0_RAT  B0RAT_5
-#endif
-#if (flash_EBIU_AMBCTL_RAT == 4)
-#define flash_EBIU_AMBCTL0_RAT  B0RAT_4
-#endif
-#if (flash_EBIU_AMBCTL_RAT == 3)
-#define flash_EBIU_AMBCTL0_RAT  B0RAT_3
-#endif
-#if (flash_EBIU_AMBCTL_RAT == 2)
-#define flash_EBIU_AMBCTL0_RAT  B0RAT_2
-#endif
-#if (flash_EBIU_AMBCTL_RAT == 1)
-#define flash_EBIU_AMBCTL0_RAT  B0RAT_1
-#endif
-
-#define flash_EBIU_AMBCTL0  \
-	(flash_EBIU_AMBCTL0_WAT | flash_EBIU_AMBCTL0_RAT | flash_EBIU_AMBCTL0_HT | \
-	 flash_EBIU_AMBCTL0_ST | flash_EBIU_AMBCTL0_TT | CONFIG_FLASH_SPEED_RDYEN)
diff --git a/include/asm-blackfin/mem_map.h b/include/asm-blackfin/mem_map.h
deleted file mode 100644
index 42d1f37f6d9c..000000000000
--- a/include/asm-blackfin/mem_map.h
+++ /dev/null
@@ -1,12 +0,0 @@
-/*
- * mem_map.h
- * Common header file for blackfin family of processors.
- *
- */
-
-#ifndef _MEM_MAP_H_
-#define _MEM_MAP_H_
-
-#include <asm/mach/mem_map.h>
-
-#endif				/* _MEM_MAP_H_ */
diff --git a/include/asm-blackfin/mmu_context.h b/include/asm-blackfin/mmu_context.h
deleted file mode 100644
index f55ec3c23a92..000000000000
--- a/include/asm-blackfin/mmu_context.h
+++ /dev/null
@@ -1,181 +0,0 @@
-/*
- * File:         include/asm-blackfin/mmu_context.h
- * Based on:
- * Author:
- *
- * Created:
- * Description:
- *
- * Modified:
- *               Copyright 2004-2006 Analog Devices Inc.
- *
- * Bugs:         Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, see the file COPYING, or write
- * to the Free Software Foundation, Inc.,
- * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
- */
-
-#ifndef __BLACKFIN_MMU_CONTEXT_H__
-#define __BLACKFIN_MMU_CONTEXT_H__
-
-#include <linux/gfp.h>
-#include <linux/sched.h>
-#include <asm/setup.h>
-#include <asm/page.h>
-#include <asm/pgalloc.h>
-#include <asm/cplbinit.h>
-
-extern void *current_l1_stack_save;
-extern int nr_l1stack_tasks;
-extern void *l1_stack_base;
-extern unsigned long l1_stack_len;
-
-extern int l1sram_free(const void*);
-extern void *l1sram_alloc_max(void*);
-
-static inline void enter_lazy_tlb(struct mm_struct *mm, struct task_struct *tsk)
-{
-}
-
-/* Called when creating a new context during fork() or execve().  */
-static inline int
-init_new_context(struct task_struct *tsk, struct mm_struct *mm)
-{
-#ifdef CONFIG_MPU
-	unsigned long p = __get_free_pages(GFP_KERNEL, page_mask_order);
-	mm->context.page_rwx_mask = (unsigned long *)p;
-	memset(mm->context.page_rwx_mask, 0,
-	       page_mask_nelts * 3 * sizeof(long));
-#endif
-	return 0;
-}
-
-static inline void free_l1stack(void)
-{
-	nr_l1stack_tasks--;
-	if (nr_l1stack_tasks == 0)
-		l1sram_free(l1_stack_base);
-}
-static inline void destroy_context(struct mm_struct *mm)
-{
-	struct sram_list_struct *tmp;
-
-	if (current_l1_stack_save == mm->context.l1_stack_save)
-		current_l1_stack_save = NULL;
-	if (mm->context.l1_stack_save)
-		free_l1stack();
-
-	while ((tmp = mm->context.sram_list)) {
-		mm->context.sram_list = tmp->next;
-		sram_free(tmp->addr);
-		kfree(tmp);
-	}
-#ifdef CONFIG_MPU
-	if (current_rwx_mask == mm->context.page_rwx_mask)
-		current_rwx_mask = NULL;
-	free_pages((unsigned long)mm->context.page_rwx_mask, page_mask_order);
-#endif
-}
-
-static inline unsigned long
-alloc_l1stack(unsigned long length, unsigned long *stack_base)
-{
-	if (nr_l1stack_tasks == 0) {
-		l1_stack_base = l1sram_alloc_max(&l1_stack_len);
-		if (!l1_stack_base)
-			return 0;
-	}
-
-	if (l1_stack_len < length) {
-		if (nr_l1stack_tasks == 0)
-			l1sram_free(l1_stack_base);
-		return 0;
-	}
-	*stack_base = (unsigned long)l1_stack_base;
-	nr_l1stack_tasks++;
-	return l1_stack_len;
-}
-
-static inline int
-activate_l1stack(struct mm_struct *mm, unsigned long sp_base)
-{
-	if (current_l1_stack_save)
-		memcpy(current_l1_stack_save, l1_stack_base, l1_stack_len);
-	mm->context.l1_stack_save = current_l1_stack_save = (void*)sp_base;
-	memcpy(l1_stack_base, current_l1_stack_save, l1_stack_len);
-	return 1;
-}
-
-#define deactivate_mm(tsk,mm)	do { } while (0)
-
-#define activate_mm(prev, next) switch_mm(prev, next, NULL)
-
-static inline void switch_mm(struct mm_struct *prev_mm, struct mm_struct *next_mm,
-			     struct task_struct *tsk)
-{
-	if (prev_mm == next_mm)
-		return;
-#ifdef CONFIG_MPU
-	if (prev_mm->context.page_rwx_mask == current_rwx_mask) {
-		flush_switched_cplbs();
-		set_mask_dcplbs(next_mm->context.page_rwx_mask);
-	}
-#endif
-
-	/* L1 stack switching.  */
-	if (!next_mm->context.l1_stack_save)
-		return;
-	if (next_mm->context.l1_stack_save == current_l1_stack_save)
-		return;
-	if (current_l1_stack_save) {
-		memcpy(current_l1_stack_save, l1_stack_base, l1_stack_len);
-	}
-	current_l1_stack_save = next_mm->context.l1_stack_save;
-	memcpy(l1_stack_base, current_l1_stack_save, l1_stack_len);
-}
-
-#ifdef CONFIG_MPU
-static inline void protect_page(struct mm_struct *mm, unsigned long addr,
-				unsigned long flags)
-{
-	unsigned long *mask = mm->context.page_rwx_mask;
-	unsigned long page = addr >> 12;
-	unsigned long idx = page >> 5;
-	unsigned long bit = 1 << (page & 31);
-
-	if (flags & VM_MAYREAD)
-		mask[idx] |= bit;
-	else
-		mask[idx] &= ~bit;
-	mask += page_mask_nelts;
-	if (flags & VM_MAYWRITE)
-		mask[idx] |= bit;
-	else
-		mask[idx] &= ~bit;
-	mask += page_mask_nelts;
-	if (flags & VM_MAYEXEC)
-		mask[idx] |= bit;
-	else
-		mask[idx] &= ~bit;
-}
-
-static inline void update_protections(struct mm_struct *mm)
-{
-	flush_switched_cplbs();
-	set_mask_dcplbs(mm->context.page_rwx_mask);
-}
-#endif
-
-#endif
diff --git a/include/asm-blackfin/module.h b/include/asm-blackfin/module.h
deleted file mode 100644
index 3c7ce1644280..000000000000
--- a/include/asm-blackfin/module.h
+++ /dev/null
@@ -1,19 +0,0 @@
-#ifndef _ASM_BFIN_MODULE_H
-#define _ASM_BFIN_MODULE_H
-
-#define MODULE_SYMBOL_PREFIX "_"
-
-#define Elf_Shdr        Elf32_Shdr
-#define Elf_Sym         Elf32_Sym
-#define Elf_Ehdr        Elf32_Ehdr
-#define FLG_CODE_IN_L1	0x10
-#define FLG_DATA_IN_L1	0x20
-
-struct mod_arch_specific {
-	Elf_Shdr	*text_l1;
-	Elf_Shdr	*data_a_l1;
-	Elf_Shdr	*bss_a_l1;
-	Elf_Shdr	*data_b_l1;
-	Elf_Shdr	*bss_b_l1;
-};
-#endif				/* _ASM_BFIN_MODULE_H */
diff --git a/include/asm-blackfin/namei.h b/include/asm-blackfin/namei.h
deleted file mode 100644
index 8b89a2d65cb4..000000000000
--- a/include/asm-blackfin/namei.h
+++ /dev/null
@@ -1,19 +0,0 @@
-/*
- * linux/include/asm/namei.h
- *
- * Included from linux/fs/namei.c
- *
- * Changes made by Lineo Inc.    May 2001
- */
-
-#ifndef __BFIN_NAMEI_H
-#define __BFIN_NAMEI_H
-
-/* This dummy routine maybe changed to something useful
- * for /usr/gnemul/ emulation stuff.
- * Look at asm-sparc/namei.h for details.
- */
-
-#define __emul_prefix() NULL
-
-#endif
diff --git a/include/asm-blackfin/pgtable.h b/include/asm-blackfin/pgtable.h
deleted file mode 100644
index b11b114689c0..000000000000
--- a/include/asm-blackfin/pgtable.h
+++ /dev/null
@@ -1,96 +0,0 @@
-#ifndef _BLACKFIN_PGTABLE_H
-#define _BLACKFIN_PGTABLE_H
-
-#include <asm-generic/4level-fixup.h>
-
-#include <asm/page.h>
-#include <asm/mach-common/def_LPBlackfin.h>
-
-typedef pte_t *pte_addr_t;
-/*
-* Trivial page table functions.
-*/
-#define pgd_present(pgd)	(1)
-#define pgd_none(pgd)		(0)
-#define pgd_bad(pgd)		(0)
-#define pgd_clear(pgdp)
-#define kern_addr_valid(addr)	(1)
-
-#define pmd_offset(a, b)	((void *)0)
-#define pmd_none(x)		(!pmd_val(x))
-#define pmd_present(x)		(pmd_val(x))
-#define pmd_clear(xp)		do { set_pmd(xp, __pmd(0)); } while (0)
-#define pmd_bad(x)		(pmd_val(x) & ~PAGE_MASK)
-
-#define kern_addr_valid(addr) (1)
-
-#define PAGE_NONE		__pgprot(0)	/* these mean nothing to NO_MM */
-#define PAGE_SHARED		__pgprot(0)	/* these mean nothing to NO_MM */
-#define PAGE_COPY		__pgprot(0)	/* these mean nothing to NO_MM */
-#define PAGE_READONLY		__pgprot(0)	/* these mean nothing to NO_MM */
-#define PAGE_KERNEL		__pgprot(0)	/* these mean nothing to NO_MM */
-
-extern void paging_init(void);
-
-#define __swp_type(x)		(0)
-#define __swp_offset(x)		(0)
-#define __swp_entry(typ,off)	((swp_entry_t) { ((typ) | ((off) << 7)) })
-#define __pte_to_swp_entry(pte)	((swp_entry_t) { pte_val(pte) })
-#define __swp_entry_to_pte(x)	((pte_t) { (x).val })
-
-static inline int pte_file(pte_t pte)
-{
-	return 0;
-}
-
-#define set_pte(pteptr, pteval) (*(pteptr) = pteval)
-#define set_pte_at(mm, addr, ptep, pteval) set_pte(ptep, pteval)
-
-/*
- * Page assess control based on Blackfin CPLB management
- */
-#define _PAGE_RD	(CPLB_USER_RD)
-#define _PAGE_WR	(CPLB_USER_WR)
-#define _PAGE_USER	(CPLB_USER_RD | CPLB_USER_WR)
-#define _PAGE_ACCESSED	CPLB_ALL_ACCESS
-#define _PAGE_DIRTY	(CPLB_DIRTY)
-
-#define PTE_BIT_FUNC(fn, op) \
-	static inline pte_t pte_##fn(pte_t _pte) { _pte.pte op; return _pte; }
-
-PTE_BIT_FUNC(rdprotect, &= ~_PAGE_RD);
-PTE_BIT_FUNC(mkread, |= _PAGE_RD);
-PTE_BIT_FUNC(wrprotect, &= ~_PAGE_WR);
-PTE_BIT_FUNC(mkwrite, |= _PAGE_WR);
-PTE_BIT_FUNC(exprotect, &= ~_PAGE_USER);
-PTE_BIT_FUNC(mkexec, |= _PAGE_USER);
-PTE_BIT_FUNC(mkclean, &= ~_PAGE_DIRTY);
-PTE_BIT_FUNC(mkdirty, |= _PAGE_DIRTY);
-PTE_BIT_FUNC(mkold, &= ~_PAGE_ACCESSED);
-PTE_BIT_FUNC(mkyoung, |= _PAGE_ACCESSED);
-
-/*
- * ZERO_PAGE is a global shared page that is always zero: used
- * for zero-mapped memory areas etc..
- */
-#define ZERO_PAGE(vaddr)	(virt_to_page(0))
-
-extern unsigned int kobjsize(const void *objp);
-
-#define swapper_pg_dir ((pgd_t *) 0)
-/*
- * No page table caches to initialise.
- */
-#define pgtable_cache_init()	do { } while (0)
-#define io_remap_pfn_range      remap_pfn_range
-
-/*
- * All 32bit addresses are effectively valid for vmalloc...
- * Sort of meaningless for non-VM targets.
- */
-#define	VMALLOC_START	0
-#define	VMALLOC_END	0xffffffff
-
-#include <asm-generic/pgtable.h>
-
-#endif				/* _BLACKFIN_PGTABLE_H */
diff --git a/include/asm-blackfin/processor.h b/include/asm-blackfin/processor.h
deleted file mode 100644
index 1c0040724612..000000000000
--- a/include/asm-blackfin/processor.h
+++ /dev/null
@@ -1,139 +0,0 @@
-#ifndef __ASM_BFIN_PROCESSOR_H
-#define __ASM_BFIN_PROCESSOR_H
-
-/*
- * Default implementation of macro that returns current
- * instruction pointer ("program counter").
- */
-#define current_text_addr() ({ __label__ _l; _l: &&_l;})
-
-#include <asm/blackfin.h>
-#include <asm/segment.h>
-#include <linux/compiler.h>
-
-static inline unsigned long rdusp(void)
-{
-	unsigned long usp;
-
-	__asm__ __volatile__("%0 = usp;\n\t":"=da"(usp));
-	return usp;
-}
-
-static inline void wrusp(unsigned long usp)
-{
-	__asm__ __volatile__("usp = %0;\n\t"::"da"(usp));
-}
-
-/*
- * User space process size: 1st byte beyond user address space.
- * Fairly meaningless on nommu.  Parts of user programs can be scattered
- * in a lot of places, so just disable this by setting it to 0xFFFFFFFF.
- */
-#define TASK_SIZE	0xFFFFFFFF
-
-#ifdef __KERNEL__
-#define STACK_TOP	TASK_SIZE
-#endif
-
-#define TASK_UNMAPPED_BASE	0
-
-struct thread_struct {
-	unsigned long ksp;	/* kernel stack pointer */
-	unsigned long usp;	/* user stack pointer */
-	unsigned short seqstat;	/* saved status register */
-	unsigned long esp0;	/* points to SR of stack frame pt_regs */
-	unsigned long pc;	/* instruction pointer */
-	void *        debuggerinfo;
-};
-
-#define INIT_THREAD  {						\
-	sizeof(init_stack) + (unsigned long) init_stack, 0,	\
-	PS_S, 0, 0						\
-}
-
-/*
- * Do necessary setup to start up a newly executed thread.
- *
- * pass the data segment into user programs if it exists,
- * it can't hurt anything as far as I can tell
- */
-#define start_thread(_regs, _pc, _usp)					\
-do {									\
-	set_fs(USER_DS);						\
-	(_regs)->pc = (_pc);						\
-	if (current->mm)						\
-		(_regs)->p5 = current->mm->start_data;			\
-	task_thread_info(current)->l1_task_info.stack_start		\
-		= (void *)current->mm->context.stack_start;		\
-	task_thread_info(current)->l1_task_info.lowest_sp = (void *)(_usp); \
-	memcpy(L1_SCRATCH_TASK_INFO, &task_thread_info(current)->l1_task_info, \
-		sizeof(*L1_SCRATCH_TASK_INFO));				\
-	wrusp(_usp);							\
-} while(0)
-
-/* Forward declaration, a strange C thing */
-struct task_struct;
-
-/* Free all resources held by a thread. */
-static inline void release_thread(struct task_struct *dead_task)
-{
-}
-
-#define prepare_to_copy(tsk)	do { } while (0)
-
-extern int kernel_thread(int (*fn) (void *), void *arg, unsigned long flags);
-
-/*
- * Free current thread data structures etc..
- */
-static inline void exit_thread(void)
-{
-}
-
-/*
- * Return saved PC of a blocked thread.
- */
-#define thread_saved_pc(tsk)	(tsk->thread.pc)
-
-unsigned long get_wchan(struct task_struct *p);
-
-#define	KSTK_EIP(tsk)							\
-    ({									\
-	unsigned long eip = 0;						\
-	if ((tsk)->thread.esp0 > PAGE_SIZE &&				\
-	    MAP_NR((tsk)->thread.esp0) < max_mapnr)			\
-	      eip = ((struct pt_regs *) (tsk)->thread.esp0)->pc;	\
-	eip; })
-#define	KSTK_ESP(tsk)	((tsk) == current ? rdusp() : (tsk)->thread.usp)
-
-#define cpu_relax()    	barrier()
-
-/* Get the Silicon Revision of the chip */
-static inline uint32_t __pure bfin_revid(void)
-{
-	/* stored in the upper 4 bits */
-	return bfin_read_CHIPID() >> 28;
-}
-
-static inline uint32_t __pure bfin_compiled_revid(void)
-{
-#if defined(CONFIG_BF_REV_0_0)
-	return 0;
-#elif defined(CONFIG_BF_REV_0_1)
-	return 1;
-#elif defined(CONFIG_BF_REV_0_2)
-	return 2;
-#elif defined(CONFIG_BF_REV_0_3)
-	return 3;
-#elif defined(CONFIG_BF_REV_0_4)
-	return 4;
-#elif defined(CONFIG_BF_REV_0_5)
-	return 5;
-#elif defined(CONFIG_BF_REV_ANY)
-	return 0xffff;
-#else
-	return -1;
-#endif
-}
-
-#endif
diff --git a/include/asm-blackfin/ptrace.h b/include/asm-blackfin/ptrace.h
deleted file mode 100644
index b8346cd3a6f6..000000000000
--- a/include/asm-blackfin/ptrace.h
+++ /dev/null
@@ -1,166 +0,0 @@
-#ifndef _BFIN_PTRACE_H
-#define _BFIN_PTRACE_H
-
-/*
- * GCC defines register number like this:
- * -----------------------------
- *       0 - 7 are data registers R0-R7
- *       8 - 15 are address registers P0-P7
- *      16 - 31 dsp registers I/B/L0 -- I/B/L3 & M0--M3
- *      32 - 33 A registers A0 & A1
- *      34 -    status register
- * -----------------------------
- *
- * We follows above, except:
- *      32-33 --- Low 32-bit of A0&1
- *      34-35 --- High 8-bit of A0&1
- */
-
-#ifndef __ASSEMBLY__
-
-/* this struct defines the way the registers are stored on the
-   stack during a system call. */
-
-struct pt_regs {
-	long orig_pc;
-	long ipend;
-	long seqstat;
-	long rete;
-	long retn;
-	long retx;
-	long pc;		/* PC == RETI */
-	long rets;
-	long reserved;		/* Used as scratch during system calls */
-	long astat;
-	long lb1;
-	long lb0;
-	long lt1;
-	long lt0;
-	long lc1;
-	long lc0;
-	long a1w;
-	long a1x;
-	long a0w;
-	long a0x;
-	long b3;
-	long b2;
-	long b1;
-	long b0;
-	long l3;
-	long l2;
-	long l1;
-	long l0;
-	long m3;
-	long m2;
-	long m1;
-	long m0;
-	long i3;
-	long i2;
-	long i1;
-	long i0;
-	long usp;
-	long fp;
-	long p5;
-	long p4;
-	long p3;
-	long p2;
-	long p1;
-	long p0;
-	long r7;
-	long r6;
-	long r5;
-	long r4;
-	long r3;
-	long r2;
-	long r1;
-	long r0;
-	long orig_r0;
-	long orig_p0;
-	long syscfg;
-};
-
-/* Arbitrarily choose the same ptrace numbers as used by the Sparc code. */
-#define PTRACE_GETREGS            12
-#define PTRACE_SETREGS            13	/* ptrace signal  */
-
-#ifdef CONFIG_BINFMT_ELF_FDPIC
-#define PTRACE_GETFDPIC           31
-#define PTRACE_GETFDPIC_EXEC      0
-#define PTRACE_GETFDPIC_INTERP    1
-#endif
-
-#define PS_S  (0x0002)
-
-/* user_mode returns true if only one bit is set in IPEND, other than the
-   master interrupt enable.  */
-#define user_mode(regs) (!(((regs)->ipend & ~0x10) & (((regs)->ipend & ~0x10) - 1)))
-#define instruction_pointer(regs) ((regs)->pc)
-#define profile_pc(regs) instruction_pointer(regs)
-extern void show_regs(struct pt_regs *);
-
-#endif				/* __ASSEMBLY__ */
-
-/*
- * Offsets used by 'ptrace' system call interface.
- */
-
-#define PT_R0 204
-#define PT_R1 200
-#define PT_R2 196
-#define PT_R3 192
-#define PT_R4 188
-#define PT_R5 184
-#define PT_R6 180
-#define PT_R7 176
-#define PT_P0 172
-#define PT_P1 168
-#define PT_P2 164
-#define PT_P3 160
-#define PT_P4 156
-#define PT_P5 152
-#define PT_FP 148
-#define PT_USP 144
-#define PT_I0 140
-#define PT_I1 136
-#define PT_I2 132
-#define PT_I3 128
-#define PT_M0 124
-#define PT_M1 120
-#define PT_M2 116
-#define PT_M3 112
-#define PT_L0 108
-#define PT_L1 104
-#define PT_L2 100
-#define PT_L3 96
-#define PT_B0 92
-#define PT_B1 88
-#define PT_B2 84
-#define PT_B3 80
-#define PT_A0X 76
-#define PT_A0W 72
-#define PT_A1X 68
-#define PT_A1W 64
-#define PT_LC0 60
-#define PT_LC1 56
-#define PT_LT0 52
-#define PT_LT1 48
-#define PT_LB0 44
-#define PT_LB1 40
-#define PT_ASTAT 36
-#define PT_RESERVED 32
-#define PT_RETS 28
-#define PT_PC 24
-#define PT_RETX 20
-#define PT_RETN 16
-#define PT_RETE 12
-#define PT_SEQSTAT 8
-#define PT_IPEND 4
-
-#define PT_SYSCFG 216
-#define PT_TEXT_ADDR 220
-#define PT_TEXT_END_ADDR 224
-#define PT_DATA_ADDR 228
-#define PT_FDPIC_EXEC 232
-#define PT_FDPIC_INTERP 236
-
-#endif				/* _BFIN_PTRACE_H */
diff --git a/include/asm-blackfin/system.h b/include/asm-blackfin/system.h
deleted file mode 100644
index 51494ef5bb41..000000000000
--- a/include/asm-blackfin/system.h
+++ /dev/null
@@ -1,221 +0,0 @@
-/*
- * File:        include/asm/system.h
- * Based on:
- * Author:      Tony Kou (tonyko@lineo.ca)
- *              Copyright (c) 2002 Arcturus Networks Inc.
- *                    (www.arcturusnetworks.com)
- *              Copyright (c) 2003 Metrowerks (www.metrowerks.com)
- *              Copyright (c) 2004 Analog Device Inc.
- * Created:     25Jan2001 - Tony Kou
- * Description: system.h include file
- *
- * Modified:     22Sep2006 - Robin Getz
- *                - move include blackfin.h down, so I can get access to
- *                   irq functions in other include files.
- *
- * Bugs:         Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2, or (at your option)
- * any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; see the file COPYING.
- * If not, write to the Free Software Foundation,
- * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
- */
-
-#ifndef _BLACKFIN_SYSTEM_H
-#define _BLACKFIN_SYSTEM_H
-
-#include <linux/linkage.h>
-#include <linux/compiler.h>
-#include <asm/mach/anomaly.h>
-
-/*
- * Interrupt configuring macros.
- */
-
-extern unsigned long irq_flags;
-
-#define local_irq_enable() \
-	__asm__ __volatile__( \
-		"sti %0;" \
-		: \
-		: "d" (irq_flags) \
-	)
-
-#define local_irq_disable() \
-	do { \
-		int __tmp_dummy; \
-		__asm__ __volatile__( \
-			"cli %0;" \
-			: "=d" (__tmp_dummy) \
-		); \
-	} while (0)
-
-#if ANOMALY_05000244 && defined(CONFIG_BFIN_ICACHE)
-# define NOP_PAD_ANOMALY_05000244 "nop; nop;"
-#else
-# define NOP_PAD_ANOMALY_05000244
-#endif
-
-#define idle_with_irq_disabled() \
-	__asm__ __volatile__( \
-		NOP_PAD_ANOMALY_05000244 \
-		".align 8;" \
-		"sti %0;" \
-		"idle;" \
-		: \
-		: "d" (irq_flags) \
-	)
-
-#ifdef CONFIG_DEBUG_HWERR
-# define __save_and_cli(x) \
-	__asm__ __volatile__( \
-		"cli %0;" \
-		"sti %1;" \
-		: "=&d" (x) \
-		: "d" (0x3F) \
-	)
-#else
-# define __save_and_cli(x) \
-	__asm__ __volatile__( \
-		"cli %0;" \
-		: "=&d" (x) \
-	)
-#endif
-
-#define local_save_flags(x) \
-	__asm__ __volatile__( \
-		"cli %0;" \
-		"sti %0;" \
-		: "=d" (x) \
-	)
-
-#ifdef CONFIG_DEBUG_HWERR
-#define irqs_enabled_from_flags(x) (((x) & ~0x3f) != 0)
-#else
-#define irqs_enabled_from_flags(x) ((x) != 0x1f)
-#endif
-
-#define local_irq_restore(x) \
-	do { \
-		if (irqs_enabled_from_flags(x)) \
-			local_irq_enable(); \
-	} while (0)
-
-/* For spinlocks etc */
-#define local_irq_save(x) __save_and_cli(x)
-
-#define	irqs_disabled()				\
-({						\
-	unsigned long flags;			\
-	local_save_flags(flags);		\
-	!irqs_enabled_from_flags(flags);	\
-})
-
-/*
- * Force strict CPU ordering.
- */
-#define nop()  asm volatile ("nop;\n\t"::)
-#define mb()   asm volatile (""   : : :"memory")
-#define rmb()  asm volatile (""   : : :"memory")
-#define wmb()  asm volatile (""   : : :"memory")
-#define set_mb(var, value) do { (void) xchg(&var, value); } while (0)
-
-#define read_barrier_depends() 		do { } while(0)
-
-#ifdef CONFIG_SMP
-#define smp_mb()	mb()
-#define smp_rmb()	rmb()
-#define smp_wmb()	wmb()
-#define smp_read_barrier_depends()	read_barrier_depends()
-#else
-#define smp_mb()	barrier()
-#define smp_rmb()	barrier()
-#define smp_wmb()	barrier()
-#define smp_read_barrier_depends()	do { } while(0)
-#endif
-
-#define xchg(ptr,x) ((__typeof__(*(ptr)))__xchg((unsigned long)(x),(ptr),sizeof(*(ptr))))
-
-struct __xchg_dummy {
-	unsigned long a[100];
-};
-#define __xg(x) ((volatile struct __xchg_dummy *)(x))
-
-static inline unsigned long __xchg(unsigned long x, volatile void *ptr,
-				   int size)
-{
-	unsigned long tmp = 0;
-	unsigned long flags = 0;
-
-	local_irq_save(flags);
-
-	switch (size) {
-	case 1:
-		__asm__ __volatile__
-			("%0 = b%2 (z);\n\t"
-			 "b%2 = %1;\n\t"
-			 : "=&d" (tmp) : "d" (x), "m" (*__xg(ptr)) : "memory");
-		break;
-	case 2:
-		__asm__ __volatile__
-			("%0 = w%2 (z);\n\t"
-			 "w%2 = %1;\n\t"
-			 : "=&d" (tmp) : "d" (x), "m" (*__xg(ptr)) : "memory");
-		break;
-	case 4:
-		__asm__ __volatile__
-			("%0 = %2;\n\t"
-			 "%2 = %1;\n\t"
-			 : "=&d" (tmp) : "d" (x), "m" (*__xg(ptr)) : "memory");
-		break;
-	}
-	local_irq_restore(flags);
-	return tmp;
-}
-
-#include <asm-generic/cmpxchg-local.h>
-
-/*
- * cmpxchg_local and cmpxchg64_local are atomic wrt current CPU. Always make
- * them available.
- */
-#define cmpxchg_local(ptr, o, n)				  	       \
-	((__typeof__(*(ptr)))__cmpxchg_local_generic((ptr), (unsigned long)(o),\
-			(unsigned long)(n), sizeof(*(ptr))))
-#define cmpxchg64_local(ptr, o, n) __cmpxchg64_local_generic((ptr), (o), (n))
-
-#ifndef CONFIG_SMP
-#include <asm-generic/cmpxchg.h>
-#endif
-
-#define prepare_to_switch()     do { } while(0)
-
-/*
- * switch_to(n) should switch tasks to task ptr, first checking that
- * ptr isn't the current task, in which case it does nothing.
- */
-
-#include <asm/blackfin.h>
-
-asmlinkage struct task_struct *resume(struct task_struct *prev, struct task_struct *next);
-
-#define switch_to(prev,next,last) \
-do {    \
-	memcpy (&task_thread_info(prev)->l1_task_info, L1_SCRATCH_TASK_INFO, \
-		sizeof *L1_SCRATCH_TASK_INFO); \
-	memcpy (L1_SCRATCH_TASK_INFO, &task_thread_info(next)->l1_task_info, \
-		sizeof *L1_SCRATCH_TASK_INFO); \
-	(last) = resume (prev, next);   \
-} while (0)
-
-#endif				/* _BLACKFIN_SYSTEM_H */
diff --git a/include/asm-blackfin/thread_info.h b/include/asm-blackfin/thread_info.h
deleted file mode 100644
index bc2fe5accf20..000000000000
--- a/include/asm-blackfin/thread_info.h
+++ /dev/null
@@ -1,138 +0,0 @@
-/*
- * File:         include/asm-blackfin/thread_info.h
- * Based on:     include/asm-m68knommu/thread_info.h
- * Author:       LG Soft India
- *               Copyright (C) 2004-2005 Analog Devices Inc.
- * Created:      Tue Sep 21 2004
- * Description:  Blackfin low-level thread information
- * Modified:
- * Bugs:         Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2, or (at your option)
- * any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; see the file COPYING.
- * If not, write to the Free Software Foundation,
- * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
- */
-
-#ifndef _ASM_THREAD_INFO_H
-#define _ASM_THREAD_INFO_H
-
-#include <asm/page.h>
-#include <asm/entry.h>
-#include <asm/l1layout.h>
-#include <linux/compiler.h>
-
-#ifdef __KERNEL__
-
-/* Thread Align Mask to reach to the top of the stack
- * for any process
- */
-#define ALIGN_PAGE_MASK         0xffffe000
-
-/*
- * Size of kernel stack for each process. This must be a power of 2...
- */
-#define THREAD_SIZE		8192	/* 2 pages */
-
-#ifndef __ASSEMBLY__
-
-typedef unsigned long mm_segment_t;
-
-/*
- * low level task data.
- * If you change this, change the TI_* offsets below to match.
- */
-
-struct thread_info {
-	struct task_struct *task;	/* main task structure */
-	struct exec_domain *exec_domain;	/* execution domain */
-	unsigned long flags;	/* low level flags */
-	int cpu;		/* cpu we're on */
-	int preempt_count;	/* 0 => preemptable, <0 => BUG */
-	mm_segment_t addr_limit;	/* address limit */
-	struct restart_block restart_block;
-	struct l1_scratch_task_info l1_task_info;
-};
-
-/*
- * macros/functions for gaining access to the thread information structure
- */
-#define INIT_THREAD_INFO(tsk)			\
-{						\
-	.task		= &tsk,			\
-	.exec_domain	= &default_exec_domain,	\
-	.flags		= 0,			\
-	.cpu		= 0,			\
-	.preempt_count  = 1,                    \
-	.restart_block	= {			\
-		.fn = do_no_restart_syscall,	\
-	},					\
-}
-#define init_thread_info	(init_thread_union.thread_info)
-#define init_stack		(init_thread_union.stack)
-
-/* Given a task stack pointer, you can find its corresponding
- * thread_info structure just by masking it to the THREAD_SIZE
- * boundary (currently 8K as you can see above).
- */
-__attribute_const__
-static inline struct thread_info *current_thread_info(void)
-{
-	struct thread_info *ti;
-      __asm__("%0 = sp;": "=&d"(ti):
-	);
-	return (struct thread_info *)((long)ti & ~((long)THREAD_SIZE-1));
-}
-
-/* thread information allocation */
-#define alloc_thread_info(tsk) ((struct thread_info *) \
-				__get_free_pages(GFP_KERNEL, 1))
-#define free_thread_info(ti)	free_pages((unsigned long) (ti), 1)
-#endif				/* __ASSEMBLY__ */
-
-/*
- * Offsets in thread_info structure, used in assembly code
- */
-#define TI_TASK		0
-#define TI_EXECDOMAIN	4
-#define TI_FLAGS	8
-#define TI_CPU		12
-#define TI_PREEMPT	16
-
-#define	PREEMPT_ACTIVE	0x4000000
-
-/*
- * thread information flag bit numbers
- */
-#define TIF_SYSCALL_TRACE	0	/* syscall trace active */
-#define TIF_SIGPENDING		1	/* signal pending */
-#define TIF_NEED_RESCHED	2	/* rescheduling necessary */
-#define TIF_POLLING_NRFLAG	3	/* true if poll_idle() is polling
-					   TIF_NEED_RESCHED */
-#define TIF_MEMDIE              4
-#define TIF_RESTORE_SIGMASK	5	/* restore signal mask in do_signal() */
-#define TIF_FREEZE              6       /* is freezing for suspend */
-
-/* as above, but as bit values */
-#define _TIF_SYSCALL_TRACE	(1<<TIF_SYSCALL_TRACE)
-#define _TIF_SIGPENDING		(1<<TIF_SIGPENDING)
-#define _TIF_NEED_RESCHED	(1<<TIF_NEED_RESCHED)
-#define _TIF_POLLING_NRFLAG	(1<<TIF_POLLING_NRFLAG)
-#define _TIF_RESTORE_SIGMASK	(1<<TIF_RESTORE_SIGMASK)
-#define _TIF_FREEZE             (1<<TIF_FREEZE)
-
-#define _TIF_WORK_MASK		0x0000FFFE	/* work to do on interrupt/exception return */
-
-#endif				/* __KERNEL__ */
-
-#endif				/* _ASM_THREAD_INFO_H */
diff --git a/include/asm-blackfin/unistd.h b/include/asm-blackfin/unistd.h
deleted file mode 100644
index 42955d0c439b..000000000000
--- a/include/asm-blackfin/unistd.h
+++ /dev/null
@@ -1,432 +0,0 @@
-#ifndef __ASM_BFIN_UNISTD_H
-#define __ASM_BFIN_UNISTD_H
-/*
- * This file contains the system call numbers.
- */
-#define __NR_restart_syscall	  0
-#define __NR_exit		  1
-#define __NR_fork		  2
-#define __NR_read		  3
-#define __NR_write		  4
-#define __NR_open		  5
-#define __NR_close		  6
-				/* 7 __NR_waitpid obsolete */
-#define __NR_creat		  8
-#define __NR_link		  9
-#define __NR_unlink		 10
-#define __NR_execve		 11
-#define __NR_chdir		 12
-#define __NR_time		 13
-#define __NR_mknod		 14
-#define __NR_chmod		 15
-#define __NR_chown		 16
-				/* 17 __NR_break obsolete */
-				/* 18 __NR_oldstat obsolete */
-#define __NR_lseek		 19
-#define __NR_getpid		 20
-#define __NR_mount		 21
-				/* 22 __NR_umount obsolete */
-#define __NR_setuid		 23
-#define __NR_getuid		 24
-#define __NR_stime		 25
-#define __NR_ptrace		 26
-#define __NR_alarm		 27
-				/* 28 __NR_oldfstat obsolete */
-#define __NR_pause		 29
-				/* 30 __NR_utime obsolete */
-				/* 31 __NR_stty obsolete */
-				/* 32 __NR_gtty obsolete */
-#define __NR_access		 33
-#define __NR_nice		 34
-				/* 35 __NR_ftime obsolete */
-#define __NR_sync		 36
-#define __NR_kill		 37
-#define __NR_rename		 38
-#define __NR_mkdir		 39
-#define __NR_rmdir		 40
-#define __NR_dup		 41
-#define __NR_pipe		 42
-#define __NR_times		 43
-				/* 44 __NR_prof obsolete */
-#define __NR_brk		 45
-#define __NR_setgid		 46
-#define __NR_getgid		 47
-				/* 48 __NR_signal obsolete */
-#define __NR_geteuid		 49
-#define __NR_getegid		 50
-#define __NR_acct		 51
-#define __NR_umount2		 52
-				/* 53 __NR_lock obsolete */
-#define __NR_ioctl		 54
-#define __NR_fcntl		 55
-				/* 56 __NR_mpx obsolete */
-#define __NR_setpgid		 57
-				/* 58 __NR_ulimit obsolete */
-				/* 59 __NR_oldolduname obsolete */
-#define __NR_umask		 60
-#define __NR_chroot		 61
-#define __NR_ustat		 62
-#define __NR_dup2		 63
-#define __NR_getppid		 64
-#define __NR_getpgrp		 65
-#define __NR_setsid		 66
-				/* 67 __NR_sigaction obsolete */
-#define __NR_sgetmask		 68
-#define __NR_ssetmask		 69
-#define __NR_setreuid		 70
-#define __NR_setregid		 71
-				/* 72 __NR_sigsuspend obsolete */
-				/* 73 __NR_sigpending obsolete */
-#define __NR_sethostname	 74
-#define __NR_setrlimit		 75
-				/* 76 __NR_old_getrlimit obsolete */
-#define __NR_getrusage		 77
-#define __NR_gettimeofday	 78
-#define __NR_settimeofday	 79
-#define __NR_getgroups		 80
-#define __NR_setgroups		 81
-				/* 82 __NR_select obsolete */
-#define __NR_symlink		 83
-				/* 84 __NR_oldlstat obsolete */
-#define __NR_readlink		 85
-				/* 86 __NR_uselib obsolete */
-				/* 87 __NR_swapon obsolete */
-#define __NR_reboot		 88
-				/* 89 __NR_readdir obsolete */
-				/* 90 __NR_mmap obsolete */
-#define __NR_munmap		 91
-#define __NR_truncate		 92
-#define __NR_ftruncate		 93
-#define __NR_fchmod		 94
-#define __NR_fchown		 95
-#define __NR_getpriority	 96
-#define __NR_setpriority	 97
-				/* 98 __NR_profil obsolete */
-#define __NR_statfs		 99
-#define __NR_fstatfs		100
-				/* 101 __NR_ioperm */
-				/* 102 __NR_socketcall obsolete */
-#define __NR_syslog		103
-#define __NR_setitimer		104
-#define __NR_getitimer		105
-#define __NR_stat		106
-#define __NR_lstat		107
-#define __NR_fstat		108
-				/* 109 __NR_olduname obsolete */
-				/* 110 __NR_iopl obsolete */
-#define __NR_vhangup		111
-				/* 112 __NR_idle obsolete */
-				/* 113 __NR_vm86old */
-#define __NR_wait4		114
-				/* 115 __NR_swapoff obsolete */
-#define __NR_sysinfo		116
-				/* 117 __NR_ipc oboslete */
-#define __NR_fsync		118
-				/* 119 __NR_sigreturn obsolete */
-#define __NR_clone		120
-#define __NR_setdomainname	121
-#define __NR_uname		122
-				/* 123 __NR_modify_ldt obsolete */
-#define __NR_adjtimex		124
-#define __NR_mprotect		125
-				/* 126 __NR_sigprocmask obsolete */
-				/* 127 __NR_create_module obsolete */
-#define __NR_init_module	128
-#define __NR_delete_module	129
-				/* 130 __NR_get_kernel_syms obsolete */
-#define __NR_quotactl		131
-#define __NR_getpgid		132
-#define __NR_fchdir		133
-#define __NR_bdflush		134
-				/* 135 was sysfs */
-#define __NR_personality	136
-				/* 137 __NR_afs_syscall */
-#define __NR_setfsuid		138
-#define __NR_setfsgid		139
-#define __NR__llseek		140
-#define __NR_getdents		141
-				/* 142 __NR__newselect obsolete */
-#define __NR_flock		143
-				/* 144 __NR_msync obsolete */
-#define __NR_readv		145
-#define __NR_writev		146
-#define __NR_getsid		147
-#define __NR_fdatasync		148
-#define __NR__sysctl		149
-				/* 150 __NR_mlock */
-				/* 151 __NR_munlock */
-				/* 152 __NR_mlockall */
-				/* 153 __NR_munlockall */
-#define __NR_sched_setparam		154
-#define __NR_sched_getparam		155
-#define __NR_sched_setscheduler		156
-#define __NR_sched_getscheduler		157
-#define __NR_sched_yield		158
-#define __NR_sched_get_priority_max	159
-#define __NR_sched_get_priority_min	160
-#define __NR_sched_rr_get_interval	161
-#define __NR_nanosleep		162
-#define __NR_mremap		163
-#define __NR_setresuid		164
-#define __NR_getresuid		165
-				/* 166 __NR_vm86 */
-				/* 167 __NR_query_module */
-				/* 168 __NR_poll */
-#define __NR_nfsservctl		169
-#define __NR_setresgid		170
-#define __NR_getresgid		171
-#define __NR_prctl		172
-#define __NR_rt_sigreturn	173
-#define __NR_rt_sigaction	174
-#define __NR_rt_sigprocmask	175
-#define __NR_rt_sigpending	176
-#define __NR_rt_sigtimedwait	177
-#define __NR_rt_sigqueueinfo	178
-#define __NR_rt_sigsuspend	179
-#define __NR_pread		180
-#define __NR_pwrite		181
-#define __NR_lchown		182
-#define __NR_getcwd		183
-#define __NR_capget		184
-#define __NR_capset		185
-#define __NR_sigaltstack	186
-#define __NR_sendfile		187
-				/* 188 __NR_getpmsg */
-				/* 189 __NR_putpmsg */
-#define __NR_vfork		190
-#define __NR_getrlimit		191
-#define __NR_mmap2		192
-#define __NR_truncate64		193
-#define __NR_ftruncate64	194
-#define __NR_stat64		195
-#define __NR_lstat64		196
-#define __NR_fstat64		197
-#define __NR_chown32		198
-#define __NR_getuid32		199
-#define __NR_getgid32		200
-#define __NR_geteuid32		201
-#define __NR_getegid32		202
-#define __NR_setreuid32		203
-#define __NR_setregid32		204
-#define __NR_getgroups32	205
-#define __NR_setgroups32	206
-#define __NR_fchown32		207
-#define __NR_setresuid32	208
-#define __NR_getresuid32	209
-#define __NR_setresgid32	210
-#define __NR_getresgid32	211
-#define __NR_lchown32		212
-#define __NR_setuid32		213
-#define __NR_setgid32		214
-#define __NR_setfsuid32		215
-#define __NR_setfsgid32		216
-#define __NR_pivot_root		217
-				/* 218 __NR_mincore */
-				/* 219 __NR_madvise */
-#define __NR_getdents64		220
-#define __NR_fcntl64		221
-				/* 222 reserved for TUX */
-				/* 223 reserved for TUX */
-#define __NR_gettid		224
-#define __NR_readahead		225
-#define __NR_setxattr		226
-#define __NR_lsetxattr		227
-#define __NR_fsetxattr		228
-#define __NR_getxattr		229
-#define __NR_lgetxattr		230
-#define __NR_fgetxattr		231
-#define __NR_listxattr		232
-#define __NR_llistxattr		233
-#define __NR_flistxattr		234
-#define __NR_removexattr	235
-#define __NR_lremovexattr	236
-#define __NR_fremovexattr	237
-#define __NR_tkill		238
-#define __NR_sendfile64		239
-#define __NR_futex		240
-#define __NR_sched_setaffinity	241
-#define __NR_sched_getaffinity	242
-				/* 243 __NR_set_thread_area */
-				/* 244 __NR_get_thread_area */
-#define __NR_io_setup		245
-#define __NR_io_destroy		246
-#define __NR_io_getevents	247
-#define __NR_io_submit		248
-#define __NR_io_cancel		249
-				/* 250 __NR_alloc_hugepages */
-				/* 251 __NR_free_hugepages */
-#define __NR_exit_group		252
-#define __NR_lookup_dcookie     253
-#define __NR_bfin_spinlock      254
-
-#define __NR_epoll_create	255
-#define __NR_epoll_ctl		256
-#define __NR_epoll_wait		257
-				/* 258 __NR_remap_file_pages */
-#define __NR_set_tid_address	259
-#define __NR_timer_create	260
-#define __NR_timer_settime	261
-#define __NR_timer_gettime	262
-#define __NR_timer_getoverrun	263
-#define __NR_timer_delete	264
-#define __NR_clock_settime	265
-#define __NR_clock_gettime	266
-#define __NR_clock_getres	267
-#define __NR_clock_nanosleep	268
-#define __NR_statfs64		269
-#define __NR_fstatfs64		270
-#define __NR_tgkill		271
-#define __NR_utimes		272
-#define __NR_fadvise64_64	273
-				/* 274 __NR_vserver */
-				/* 275 __NR_mbind */
-				/* 276 __NR_get_mempolicy */
-				/* 277 __NR_set_mempolicy */
-#define __NR_mq_open 		278
-#define __NR_mq_unlink		279
-#define __NR_mq_timedsend	280
-#define __NR_mq_timedreceive	281
-#define __NR_mq_notify		282
-#define __NR_mq_getsetattr	283
-#define __NR_kexec_load		284
-#define __NR_waitid		285
-#define __NR_add_key		286
-#define __NR_request_key	287
-#define __NR_keyctl		288
-#define __NR_ioprio_set		289
-#define __NR_ioprio_get		290
-#define __NR_inotify_init	291
-#define __NR_inotify_add_watch	292
-#define __NR_inotify_rm_watch	293
-				/* 294 __NR_migrate_pages */
-#define __NR_openat		295
-#define __NR_mkdirat		296
-#define __NR_mknodat		297
-#define __NR_fchownat		298
-#define __NR_futimesat		299
-#define __NR_fstatat64		300
-#define __NR_unlinkat		301
-#define __NR_renameat		302
-#define __NR_linkat		303
-#define __NR_symlinkat		304
-#define __NR_readlinkat		305
-#define __NR_fchmodat		306
-#define __NR_faccessat		307
-#define __NR_pselect6		308
-#define __NR_ppoll		309
-#define __NR_unshare		310
-
-/* Blackfin private syscalls */
-#define __NR_sram_alloc		311
-#define __NR_sram_free		312
-#define __NR_dma_memcpy		313
-
-/* socket syscalls */
-#define __NR_accept		314
-#define __NR_bind		315
-#define __NR_connect		316
-#define __NR_getpeername	317
-#define __NR_getsockname	318
-#define __NR_getsockopt		319
-#define __NR_listen		320
-#define __NR_recv		321
-#define __NR_recvfrom		322
-#define __NR_recvmsg		323
-#define __NR_send		324
-#define __NR_sendmsg		325
-#define __NR_sendto		326
-#define __NR_setsockopt		327
-#define __NR_shutdown		328
-#define __NR_socket		329
-#define __NR_socketpair		330
-
-/* sysv ipc syscalls */
-#define __NR_semctl		331
-#define __NR_semget		332
-#define __NR_semop		333
-#define __NR_msgctl		334
-#define __NR_msgget		335
-#define __NR_msgrcv		336
-#define __NR_msgsnd		337
-#define __NR_shmat		338
-#define __NR_shmctl		339
-#define __NR_shmdt		340
-#define __NR_shmget		341
-
-#define __NR_splice		342
-#define __NR_sync_file_range	343
-#define __NR_tee		344
-#define __NR_vmsplice		345
-
-#define __NR_epoll_pwait	346
-#define __NR_utimensat		347
-#define __NR_signalfd		348
-#define __NR_timerfd_create	349
-#define __NR_eventfd		350
-#define __NR_pread64		351
-#define __NR_pwrite64		352
-#define __NR_fadvise64		353
-#define __NR_set_robust_list	354
-#define __NR_get_robust_list	355
-#define __NR_fallocate		356
-#define __NR_semtimedop		357
-#define __NR_timerfd_settime	358
-#define __NR_timerfd_gettime	359
-
-#define __NR_syscall		360
-#define NR_syscalls		__NR_syscall
-
-/* Old optional stuff no one actually uses */
-#define __IGNORE_sysfs
-#define __IGNORE_uselib
-
-/* Implement the newer interfaces */
-#define __IGNORE_mmap
-#define __IGNORE_poll
-#define __IGNORE_select
-#define __IGNORE_utime
-
-/* Not relevant on no-mmu */
-#define __IGNORE_swapon
-#define __IGNORE_swapoff
-#define __IGNORE_msync
-#define __IGNORE_mlock
-#define __IGNORE_munlock
-#define __IGNORE_mlockall
-#define __IGNORE_munlockall
-#define __IGNORE_mincore
-#define __IGNORE_madvise
-#define __IGNORE_remap_file_pages
-#define __IGNORE_mbind
-#define __IGNORE_get_mempolicy
-#define __IGNORE_set_mempolicy
-#define __IGNORE_migrate_pages
-#define __IGNORE_move_pages
-#define __IGNORE_getcpu
-
-#ifdef __KERNEL__
-#define __ARCH_WANT_IPC_PARSE_VERSION
-#define __ARCH_WANT_STAT64
-#define __ARCH_WANT_SYS_ALARM
-#define __ARCH_WANT_SYS_GETHOSTNAME
-#define __ARCH_WANT_SYS_PAUSE
-#define __ARCH_WANT_SYS_SGETMASK
-#define __ARCH_WANT_SYS_TIME
-#define __ARCH_WANT_SYS_FADVISE64
-#define __ARCH_WANT_SYS_GETPGRP
-#define __ARCH_WANT_SYS_LLSEEK
-#define __ARCH_WANT_SYS_NICE
-#define __ARCH_WANT_SYS_RT_SIGACTION
-#define __ARCH_WANT_SYS_RT_SIGSUSPEND
-
-/*
- * "Conditional" syscalls
- *
- * What we want is __attribute__((weak,alias("sys_ni_syscall"))),
- * but it doesn't work on all toolchains, so we just do it by hand
- */
-#define cond_syscall(x) asm(".weak\t_" #x "\n\t.set\t_" #x ",_sys_ni_syscall");
-
-#endif	/* __KERNEL__ */
-
-#endif				/* __ASM_BFIN_UNISTD_H */
diff --git a/include/asm-cris/Kbuild b/include/asm-cris/Kbuild
index b7037d80d461..d5b631935ec8 100644
--- a/include/asm-cris/Kbuild
+++ b/include/asm-cris/Kbuild
@@ -1,6 +1,5 @@
 include include/asm-generic/Kbuild.asm
 
-header-y += arch/
 header-y += arch-v10/
 header-y += arch-v32/
 
diff --git a/include/asm-cris/arch-v10/Kbuild b/include/asm-cris/arch-v10/Kbuild
index 60e7e1b73cec..7a192e1290b1 100644
--- a/include/asm-cris/arch-v10/Kbuild
+++ b/include/asm-cris/arch-v10/Kbuild
@@ -1,4 +1,3 @@
-header-y += ptrace.h
 header-y += user.h
 header-y += svinto.h
 header-y += sv_addr_ag.h
diff --git a/include/asm-cris/arch-v10/ptrace.h b/include/asm-cris/arch-v10/ptrace.h
index fb14c5ee37f9..2f464eab3a51 100644
--- a/include/asm-cris/arch-v10/ptrace.h
+++ b/include/asm-cris/arch-v10/ptrace.h
@@ -106,10 +106,14 @@ struct switch_stack {
 	unsigned long return_ip; /* ip that _resume will return to */
 };
 
+#ifdef __KERNEL__
+
 /* bit 8 is user-mode flag */
 #define user_mode(regs) (((regs)->dccr & 0x100) != 0)
 #define instruction_pointer(regs) ((regs)->irp)
 #define profile_pc(regs) instruction_pointer(regs)
 extern void show_regs(struct pt_regs *);
 
+#endif  /*  __KERNEL__  */
+
 #endif
diff --git a/include/asm-cris/arch-v32/Kbuild b/include/asm-cris/arch-v32/Kbuild
index a0ec545e242e..35f2fc4f993e 100644
--- a/include/asm-cris/arch-v32/Kbuild
+++ b/include/asm-cris/arch-v32/Kbuild
@@ -1,3 +1,2 @@
-header-y += ptrace.h
 header-y += user.h
 header-y += cryptocop.h
diff --git a/include/asm-cris/arch-v32/ptrace.h b/include/asm-cris/arch-v32/ptrace.h
index 516cc7062d94..41f4e8662bc2 100644
--- a/include/asm-cris/arch-v32/ptrace.h
+++ b/include/asm-cris/arch-v32/ptrace.h
@@ -106,9 +106,13 @@ struct switch_stack {
 	unsigned long return_ip; /* ip that _resume will return to */
 };
 
+#ifdef __KERNEL__
+
 #define user_mode(regs) (((regs)->ccs & (1 << (U_CCS_BITNR + CCS_SHIFT))) != 0)
 #define instruction_pointer(regs) ((regs)->erp)
 extern void show_regs(struct pt_regs *);
 #define profile_pc(regs) instruction_pointer(regs)
 
+#endif  /*  __KERNEL__  */
+
 #endif
diff --git a/include/asm-cris/dma-mapping.h b/include/asm-cris/dma-mapping.h
index edc8d1bfaae2..da8ef8e8f842 100644
--- a/include/asm-cris/dma-mapping.h
+++ b/include/asm-cris/dma-mapping.h
@@ -14,6 +14,8 @@
 #define dma_free_noncoherent(d, s, v, h) dma_free_coherent(d, s, v, h)
 
 #ifdef CONFIG_PCI
+#include <asm-generic/dma-coherent.h>
+
 void *dma_alloc_coherent(struct device *dev, size_t size,
 			   dma_addr_t *dma_handle, gfp_t flag);
 
@@ -120,7 +122,7 @@ dma_sync_sg_for_device(struct device *dev, struct scatterlist *sg, int nelems,
 }
 
 static inline int
-dma_mapping_error(dma_addr_t dma_addr)
+dma_mapping_error(struct device *dev, dma_addr_t dma_addr)
 {
 	return 0;
 }
diff --git a/include/asm-cris/kvm.h b/include/asm-cris/kvm.h
deleted file mode 100644
index c860f51149f0..000000000000
--- a/include/asm-cris/kvm.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef __LINUX_KVM_CRIS_H
-#define __LINUX_KVM_CRIS_H
-
-/* cris does not support KVM */
-
-#endif
diff --git a/include/asm-cris/namei.h b/include/asm-cris/namei.h
deleted file mode 100644
index 8a3be7a6d9f6..000000000000
--- a/include/asm-cris/namei.h
+++ /dev/null
@@ -1,17 +0,0 @@
-/* $Id: namei.h,v 1.1 2000/07/10 16:32:31 bjornw Exp $
- * linux/include/asm-cris/namei.h
- *
- * Included from linux/fs/namei.c
- */
-
-#ifndef __CRIS_NAMEI_H
-#define __CRIS_NAMEI_H
-
-/* used to find file-system prefixes for doing emulations
- * see for example asm-sparc/namei.h
- * we don't use it...
- */
-
-#define __emul_prefix() NULL
-
-#endif /* __CRIS_NAMEI_H */
diff --git a/include/asm-cris/ptrace.h b/include/asm-cris/ptrace.h
index 1ec69a7ea836..d910925e3174 100644
--- a/include/asm-cris/ptrace.h
+++ b/include/asm-cris/ptrace.h
@@ -4,11 +4,13 @@
 #include <asm/arch/ptrace.h>
 
 #ifdef __KERNEL__
+
 /* Arbitrarily choose the same ptrace numbers as used by the Sparc code. */
 #define PTRACE_GETREGS            12
 #define PTRACE_SETREGS            13
-#endif
 
 #define profile_pc(regs) instruction_pointer(regs)
 
+#endif /* __KERNEL__ */
+
 #endif /* _CRIS_PTRACE_H */
diff --git a/include/asm-cris/thread_info.h b/include/asm-cris/thread_info.h
index 784668ab0fa2..7efe1000f99d 100644
--- a/include/asm-cris/thread_info.h
+++ b/include/asm-cris/thread_info.h
@@ -11,6 +11,8 @@
 
 #ifdef __KERNEL__
 
+#define __HAVE_ARCH_THREAD_INFO_ALLOCATOR
+
 #ifndef __ASSEMBLY__
 #include <asm/types.h>
 #include <asm/processor.h>
diff --git a/include/asm-frv/Kbuild b/include/asm-frv/Kbuild
index bc3f12c5b7e0..0f8956def738 100644
--- a/include/asm-frv/Kbuild
+++ b/include/asm-frv/Kbuild
@@ -3,4 +3,3 @@ include include/asm-generic/Kbuild.asm
 header-y += registers.h
 
 unifdef-y += termios.h
-unifdef-y += ptrace.h
diff --git a/include/asm-frv/dma-mapping.h b/include/asm-frv/dma-mapping.h
index 2e8966ca030d..b2898877c07b 100644
--- a/include/asm-frv/dma-mapping.h
+++ b/include/asm-frv/dma-mapping.h
@@ -126,7 +126,7 @@ void dma_sync_sg_for_device(struct device *dev, struct scatterlist *sg, int nele
 }
 
 static inline
-int dma_mapping_error(dma_addr_t dma_addr)
+int dma_mapping_error(struct device *dev, dma_addr_t dma_addr)
 {
 	return 0;
 }
diff --git a/include/asm-frv/io.h b/include/asm-frv/io.h
index 20e44fe00abf..ca7475e73b5e 100644
--- a/include/asm-frv/io.h
+++ b/include/asm-frv/io.h
@@ -271,6 +271,8 @@ static inline void __iomem *ioremap_fullcache(unsigned long physaddr, unsigned l
 	return __ioremap(physaddr, size, IOMAP_FULL_CACHING);
 }
 
+#define ioremap_wc ioremap_nocache
+
 extern void iounmap(void volatile __iomem *addr);
 
 static inline void __iomem *ioport_map(unsigned long port, unsigned int nr)
diff --git a/include/asm-frv/kvm.h b/include/asm-frv/kvm.h
deleted file mode 100644
index 9c8a4f08d0a9..000000000000
--- a/include/asm-frv/kvm.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef __LINUX_KVM_FRV_H
-#define __LINUX_KVM_FRV_H
-
-/* frv does not support KVM */
-
-#endif
diff --git a/include/asm-frv/namei.h b/include/asm-frv/namei.h
deleted file mode 100644
index 4ea57171d951..000000000000
--- a/include/asm-frv/namei.h
+++ /dev/null
@@ -1,18 +0,0 @@
-/*
- * include/asm-frv/namei.h
- *
- * Included from linux/fs/namei.c
- */
-
-#ifndef __ASM_NAMEI_H
-#define __ASM_NAMEI_H
-
-/* This dummy routine maybe changed to something useful
- * for /usr/gnemul/ emulation stuff.
- * Look at asm-sparc/namei.h for details.
- */
-
-#define __emul_prefix() NULL
-
-#endif
-
diff --git a/include/asm-frv/thread_info.h b/include/asm-frv/thread_info.h
index 348b8f1df17e..b7ac6bf2844c 100644
--- a/include/asm-frv/thread_info.h
+++ b/include/asm-frv/thread_info.h
@@ -82,6 +82,8 @@ register struct thread_info *__current_thread_info asm("gr15");
 
 #define current_thread_info() ({ __current_thread_info; })
 
+#define __HAVE_ARCH_THREAD_INFO_ALLOCATOR
+
 /* thread information allocation */
 #ifdef CONFIG_DEBUG_STACK_USAGE
 #define alloc_thread_info(tsk)					\
diff --git a/include/asm-frv/unistd.h b/include/asm-frv/unistd.h
index f184eb8c047c..edcfaf5f0414 100644
--- a/include/asm-frv/unistd.h
+++ b/include/asm-frv/unistd.h
@@ -333,10 +333,16 @@
 #define __NR_fallocate		324
 #define __NR_timerfd_settime	325
 #define __NR_timerfd_gettime	326
+#define __NR_signalfd4		327
+#define __NR_eventfd2		328
+#define __NR_epoll_create1	329
+#define __NR_dup3		330
+#define __NR_pipe2		331
+#define __NR_inotify_init1	332
 
 #ifdef __KERNEL__
 
-#define NR_syscalls 325
+#define NR_syscalls 333
 
 #define __ARCH_WANT_IPC_PARSE_VERSION
 /* #define __ARCH_WANT_OLD_READDIR */
diff --git a/include/asm-generic/Kbuild.asm b/include/asm-generic/Kbuild.asm
index 7cd25b8e7c9a..1170dc60e638 100644
--- a/include/asm-generic/Kbuild.asm
+++ b/include/asm-generic/Kbuild.asm
@@ -1,4 +1,6 @@
+ifneq ($(wildcard $(srctree)/include/asm-$(SRCARCH)/kvm.h),)
 header-y  += kvm.h
+endif
 
 ifneq ($(wildcard $(srctree)/include/asm-$(SRCARCH)/a.out.h),)
 unifdef-y += a.out.h
diff --git a/include/asm-generic/bug.h b/include/asm-generic/bug.h
index 2632328d8646..a3f738cffdb6 100644
--- a/include/asm-generic/bug.h
+++ b/include/asm-generic/bug.h
@@ -34,9 +34,14 @@ struct bug_entry {
 #ifndef __WARN
 #ifndef __ASSEMBLY__
 extern void warn_on_slowpath(const char *file, const int line);
+extern void warn_slowpath(const char *file, const int line,
+		const char *fmt, ...) __attribute__((format(printf, 3, 4)));
 #define WANT_WARN_ON_SLOWPATH
 #endif
 #define __WARN() warn_on_slowpath(__FILE__, __LINE__)
+#define __WARN_printf(arg...) warn_slowpath(__FILE__, __LINE__, arg)
+#else
+#define __WARN_printf(arg...) __WARN()
 #endif
 
 #ifndef WARN_ON
@@ -48,6 +53,15 @@ extern void warn_on_slowpath(const char *file, const int line);
 })
 #endif
 
+#ifndef WARN
+#define WARN(condition, format...) ({						\
+	int __ret_warn_on = !!(condition);				\
+	if (unlikely(__ret_warn_on))					\
+		__WARN_printf(format);					\
+	unlikely(__ret_warn_on);					\
+})
+#endif
+
 #else /* !CONFIG_BUG */
 #ifndef HAVE_ARCH_BUG
 #define BUG()
@@ -63,6 +77,14 @@ extern void warn_on_slowpath(const char *file, const int line);
 	unlikely(__ret_warn_on);					\
 })
 #endif
+
+#ifndef WARN
+#define WARN(condition, format...) ({					\
+	int __ret_warn_on = !!(condition);				\
+	unlikely(__ret_warn_on);					\
+})
+#endif
+
 #endif
 
 #define WARN_ON_ONCE(condition)	({				\
@@ -75,6 +97,9 @@ extern void warn_on_slowpath(const char *file, const int line);
 	unlikely(__ret_warn_once);				\
 })
 
+#define WARN_ON_RATELIMIT(condition, state)			\
+		WARN_ON((condition) && __ratelimit(state))
+
 #ifdef CONFIG_SMP
 # define WARN_ON_SMP(x)			WARN_ON(x)
 #else
diff --git a/include/asm-generic/dma-coherent.h b/include/asm-generic/dma-coherent.h
new file mode 100644
index 000000000000..85a3ffaa0242
--- /dev/null
+++ b/include/asm-generic/dma-coherent.h
@@ -0,0 +1,32 @@
+#ifndef DMA_COHERENT_H
+#define DMA_COHERENT_H
+
+#ifdef CONFIG_HAVE_GENERIC_DMA_COHERENT
+/*
+ * These two functions are only for dma allocator.
+ * Don't use them in device drivers.
+ */
+int dma_alloc_from_coherent(struct device *dev, ssize_t size,
+				       dma_addr_t *dma_handle, void **ret);
+int dma_release_from_coherent(struct device *dev, int order, void *vaddr);
+
+/*
+ * Standard interface
+ */
+#define ARCH_HAS_DMA_DECLARE_COHERENT_MEMORY
+extern int
+dma_declare_coherent_memory(struct device *dev, dma_addr_t bus_addr,
+			    dma_addr_t device_addr, size_t size, int flags);
+
+extern void
+dma_release_declared_memory(struct device *dev);
+
+extern void *
+dma_mark_declared_memory_occupied(struct device *dev,
+				  dma_addr_t device_addr, size_t size);
+#else
+#define dma_alloc_from_coherent(dev, size, handle, ret) (0)
+#define dma_release_from_coherent(dev, order, vaddr) (0)
+#endif
+
+#endif
diff --git a/include/asm-generic/dma-mapping-broken.h b/include/asm-generic/dma-mapping-broken.h
index e2468f894d2a..82cd0cb1c3fe 100644
--- a/include/asm-generic/dma-mapping-broken.h
+++ b/include/asm-generic/dma-mapping-broken.h
@@ -61,7 +61,7 @@ dma_sync_sg_for_cpu(struct device *dev, struct scatterlist *sg, int nelems,
 #define dma_sync_sg_for_device dma_sync_sg_for_cpu
 
 extern int
-dma_mapping_error(dma_addr_t dma_addr);
+dma_mapping_error(struct device *dev, dma_addr_t dma_addr);
 
 extern int
 dma_supported(struct device *dev, u64 mask);
diff --git a/include/asm-generic/dma-mapping.h b/include/asm-generic/dma-mapping.h
index 783ab9944d70..189486c3f92e 100644
--- a/include/asm-generic/dma-mapping.h
+++ b/include/asm-generic/dma-mapping.h
@@ -144,9 +144,9 @@ dma_sync_sg_for_device(struct device *dev, struct scatterlist *sg, int nelems,
 }
 
 static inline int
-dma_mapping_error(dma_addr_t dma_addr)
+dma_mapping_error(struct device *dev, dma_addr_t dma_addr)
 {
-	return pci_dma_mapping_error(dma_addr);
+	return pci_dma_mapping_error(to_pci_dev(dev), dma_addr);
 }
 
 
diff --git a/include/asm-generic/gpio.h b/include/asm-generic/gpio.h
index 6be061d09da9..0f99ad38b012 100644
--- a/include/asm-generic/gpio.h
+++ b/include/asm-generic/gpio.h
@@ -2,8 +2,9 @@
 #define _ASM_GENERIC_GPIO_H
 
 #include <linux/types.h>
+#include <linux/errno.h>
 
-#ifdef CONFIG_HAVE_GPIO_LIB
+#ifdef CONFIG_GPIOLIB
 
 #include <linux/compiler.h>
 
@@ -13,7 +14,7 @@
  *
  * While the GPIO programming interface defines valid GPIO numbers
  * to be in the range 0..MAX_INT, this library restricts them to the
- * smaller range 0..ARCH_NR_GPIOS.
+ * smaller range 0..ARCH_NR_GPIOS-1.
  */
 
 #ifndef ARCH_NR_GPIOS
@@ -32,6 +33,8 @@ struct module;
 /**
  * struct gpio_chip - abstract a GPIO controller
  * @label: for diagnostics
+ * @dev: optional device providing the GPIOs
+ * @owner: helps prevent removal of modules exporting active GPIOs
  * @direction_input: configures signal "offset" as input, or returns error
  * @get: returns value for signal "offset"; for output signals this
  *	returns either the value actually sensed, or zero
@@ -59,6 +62,7 @@ struct module;
  */
 struct gpio_chip {
 	char			*label;
+	struct device		*dev;
 	struct module		*owner;
 
 	int			(*direction_input)(struct gpio_chip *chip,
@@ -74,6 +78,7 @@ struct gpio_chip {
 	int			base;
 	u16			ngpio;
 	unsigned		can_sleep:1;
+	unsigned		exported:1;
 };
 
 extern const char *gpiochip_is_requested(struct gpio_chip *chip,
@@ -108,7 +113,18 @@ extern void __gpio_set_value(unsigned gpio, int value);
 extern int __gpio_cansleep(unsigned gpio);
 
 
-#else
+#ifdef CONFIG_GPIO_SYSFS
+
+/*
+ * A sysfs interface can be exported by individual drivers if they want,
+ * but more typically is configured entirely from userspace.
+ */
+extern int gpio_export(unsigned gpio, bool direction_may_change);
+extern void gpio_unexport(unsigned gpio);
+
+#endif	/* CONFIG_GPIO_SYSFS */
+
+#else	/* !CONFIG_HAVE_GPIO_LIB */
 
 static inline int gpio_is_valid(int number)
 {
@@ -137,6 +153,20 @@ static inline void gpio_set_value_cansleep(unsigned gpio, int value)
 	gpio_set_value(gpio, value);
 }
 
-#endif
+#endif /* !CONFIG_HAVE_GPIO_LIB */
+
+#ifndef CONFIG_GPIO_SYSFS
+
+/* sysfs support is only available with gpiolib, where it's optional */
+
+static inline int gpio_export(unsigned gpio, bool direction_may_change)
+{
+	return -ENOSYS;
+}
+
+static inline void gpio_unexport(unsigned gpio)
+{
+}
+#endif	/* CONFIG_GPIO_SYSFS */
 
 #endif /* _ASM_GENERIC_GPIO_H */
diff --git a/include/asm-generic/int-ll64.h b/include/asm-generic/int-ll64.h
index 260948905e4e..f9bc9ac29b36 100644
--- a/include/asm-generic/int-ll64.h
+++ b/include/asm-generic/int-ll64.h
@@ -26,7 +26,7 @@ typedef unsigned int __u32;
 #ifdef __GNUC__
 __extension__ typedef __signed__ long long __s64;
 __extension__ typedef unsigned long long __u64;
-#elif defined(__STDC_VERSION__) && __STDC_VERSION__ >= 199901L
+#else
 typedef __signed__ long long __s64;
 typedef unsigned long long __u64;
 #endif
diff --git a/include/asm-generic/ioctl.h b/include/asm-generic/ioctl.h
index 864181385579..15828b2d663c 100644
--- a/include/asm-generic/ioctl.h
+++ b/include/asm-generic/ioctl.h
@@ -68,12 +68,16 @@
 	 ((nr)   << _IOC_NRSHIFT) | \
 	 ((size) << _IOC_SIZESHIFT))
 
+#ifdef __KERNEL__
 /* provoke compile error for invalid uses of size argument */
 extern unsigned int __invalid_size_argument_for_IOC;
 #define _IOC_TYPECHECK(t) \
 	((sizeof(t) == sizeof(t[1]) && \
 	  sizeof(t) < (1 << _IOC_SIZEBITS)) ? \
 	  sizeof(t) : __invalid_size_argument_for_IOC)
+#else
+#define _IOC_TYPECHECK(t) (sizeof(t))
+#endif
 
 /* used to create numbers */
 #define _IO(type,nr)		_IOC(_IOC_NONE,(type),(nr),0)
diff --git a/include/asm-generic/pci-dma-compat.h b/include/asm-generic/pci-dma-compat.h
index 25c10e96b2b7..37b3706226e7 100644
--- a/include/asm-generic/pci-dma-compat.h
+++ b/include/asm-generic/pci-dma-compat.h
@@ -99,9 +99,9 @@ pci_dma_sync_sg_for_device(struct pci_dev *hwdev, struct scatterlist *sg,
 }
 
 static inline int
-pci_dma_mapping_error(dma_addr_t dma_addr)
+pci_dma_mapping_error(struct pci_dev *pdev, dma_addr_t dma_addr)
 {
-	return dma_mapping_error(dma_addr);
+	return dma_mapping_error(&pdev->dev, dma_addr);
 }
 
 #endif
diff --git a/include/asm-generic/pgtable-nopmd.h b/include/asm-generic/pgtable-nopmd.h
index 087325ede76c..a7cdc48e8b78 100644
--- a/include/asm-generic/pgtable-nopmd.h
+++ b/include/asm-generic/pgtable-nopmd.h
@@ -5,6 +5,8 @@
 
 #include <asm-generic/pgtable-nopud.h>
 
+struct mm_struct;
+
 #define __PAGETABLE_PMD_FOLDED
 
 /*
@@ -54,7 +56,9 @@ static inline pmd_t * pmd_offset(pud_t * pud, unsigned long address)
  * inside the pud, so has no extra memory associated with it.
  */
 #define pmd_alloc_one(mm, address)		NULL
-#define pmd_free(mm, x)				do { } while (0)
+static inline void pmd_free(struct mm_struct *mm, pmd_t *pmd)
+{
+}
 #define __pmd_free_tlb(tlb, x)			do { } while (0)
 
 #undef  pmd_addr_end
diff --git a/include/asm-generic/rtc.h b/include/asm-generic/rtc.h
index be4af0029ac0..71ef3f0b9685 100644
--- a/include/asm-generic/rtc.h
+++ b/include/asm-generic/rtc.h
@@ -15,6 +15,7 @@
 #include <linux/mc146818rtc.h>
 #include <linux/rtc.h>
 #include <linux/bcd.h>
+#include <linux/delay.h>
 
 #define RTC_PIE 0x40		/* periodic interrupt enable */
 #define RTC_AIE 0x20		/* alarm interrupt enable */
@@ -43,7 +44,6 @@ static inline unsigned char rtc_is_updating(void)
 
 static inline unsigned int get_rtc_time(struct rtc_time *time)
 {
-	unsigned long uip_watchdog = jiffies;
 	unsigned char ctrl;
 	unsigned long flags;
 
@@ -53,19 +53,15 @@ static inline unsigned int get_rtc_time(struct rtc_time *time)
 
 	/*
 	 * read RTC once any update in progress is done. The update
-	 * can take just over 2ms. We wait 10 to 20ms. There is no need to
+	 * can take just over 2ms. We wait 20ms. There is no need to
 	 * to poll-wait (up to 1s - eeccch) for the falling edge of RTC_UIP.
 	 * If you need to know *exactly* when a second has started, enable
 	 * periodic update complete interrupts, (via ioctl) and then 
 	 * immediately read /dev/rtc which will block until you get the IRQ.
 	 * Once the read clears, read the RTC time (again via ioctl). Easy.
 	 */
-
-	if (rtc_is_updating() != 0)
-		while (jiffies - uip_watchdog < 2*HZ/100) {
-			barrier();
-			cpu_relax();
-		}
+	if (rtc_is_updating())
+		mdelay(20);
 
 	/*
 	 * Only the values that we read from the RTC are set. We leave
diff --git a/include/asm-generic/syscall.h b/include/asm-generic/syscall.h
new file mode 100644
index 000000000000..abcf34c2fdc7
--- /dev/null
+++ b/include/asm-generic/syscall.h
@@ -0,0 +1,141 @@
+/*
+ * Access to user system call parameters and results
+ *
+ * Copyright (C) 2008 Red Hat, Inc.  All rights reserved.
+ *
+ * This copyrighted material is made available to anyone wishing to use,
+ * modify, copy, or redistribute it subject to the terms and conditions
+ * of the GNU General Public License v.2.
+ *
+ * This file is a stub providing documentation for what functions
+ * asm-ARCH/syscall.h files need to define.  Most arch definitions
+ * will be simple inlines.
+ *
+ * All of these functions expect to be called with no locks,
+ * and only when the caller is sure that the task of interest
+ * cannot return to user mode while we are looking at it.
+ */
+
+#ifndef _ASM_SYSCALL_H
+#define _ASM_SYSCALL_H	1
+
+struct task_struct;
+struct pt_regs;
+
+/**
+ * syscall_get_nr - find what system call a task is executing
+ * @task:	task of interest, must be blocked
+ * @regs:	task_pt_regs() of @task
+ *
+ * If @task is executing a system call or is at system call
+ * tracing about to attempt one, returns the system call number.
+ * If @task is not executing a system call, i.e. it's blocked
+ * inside the kernel for a fault or signal, returns -1.
+ *
+ * It's only valid to call this when @task is known to be blocked.
+ */
+long syscall_get_nr(struct task_struct *task, struct pt_regs *regs);
+
+/**
+ * syscall_rollback - roll back registers after an aborted system call
+ * @task:	task of interest, must be in system call exit tracing
+ * @regs:	task_pt_regs() of @task
+ *
+ * It's only valid to call this when @task is stopped for system
+ * call exit tracing (due to TIF_SYSCALL_TRACE or TIF_SYSCALL_AUDIT),
+ * after tracehook_report_syscall_entry() returned nonzero to prevent
+ * the system call from taking place.
+ *
+ * This rolls back the register state in @regs so it's as if the
+ * system call instruction was a no-op.  The registers containing
+ * the system call number and arguments are as they were before the
+ * system call instruction.  This may not be the same as what the
+ * register state looked like at system call entry tracing.
+ */
+void syscall_rollback(struct task_struct *task, struct pt_regs *regs);
+
+/**
+ * syscall_get_error - check result of traced system call
+ * @task:	task of interest, must be blocked
+ * @regs:	task_pt_regs() of @task
+ *
+ * Returns 0 if the system call succeeded, or -ERRORCODE if it failed.
+ *
+ * It's only valid to call this when @task is stopped for tracing on exit
+ * from a system call, due to %TIF_SYSCALL_TRACE or %TIF_SYSCALL_AUDIT.
+ */
+long syscall_get_error(struct task_struct *task, struct pt_regs *regs);
+
+/**
+ * syscall_get_return_value - get the return value of a traced system call
+ * @task:	task of interest, must be blocked
+ * @regs:	task_pt_regs() of @task
+ *
+ * Returns the return value of the successful system call.
+ * This value is meaningless if syscall_get_error() returned nonzero.
+ *
+ * It's only valid to call this when @task is stopped for tracing on exit
+ * from a system call, due to %TIF_SYSCALL_TRACE or %TIF_SYSCALL_AUDIT.
+ */
+long syscall_get_return_value(struct task_struct *task, struct pt_regs *regs);
+
+/**
+ * syscall_set_return_value - change the return value of a traced system call
+ * @task:	task of interest, must be blocked
+ * @regs:	task_pt_regs() of @task
+ * @error:	negative error code, or zero to indicate success
+ * @val:	user return value if @error is zero
+ *
+ * This changes the results of the system call that user mode will see.
+ * If @error is zero, the user sees a successful system call with a
+ * return value of @val.  If @error is nonzero, it's a negated errno
+ * code; the user sees a failed system call with this errno code.
+ *
+ * It's only valid to call this when @task is stopped for tracing on exit
+ * from a system call, due to %TIF_SYSCALL_TRACE or %TIF_SYSCALL_AUDIT.
+ */
+void syscall_set_return_value(struct task_struct *task, struct pt_regs *regs,
+			      int error, long val);
+
+/**
+ * syscall_get_arguments - extract system call parameter values
+ * @task:	task of interest, must be blocked
+ * @regs:	task_pt_regs() of @task
+ * @i:		argument index [0,5]
+ * @n:		number of arguments; n+i must be [1,6].
+ * @args:	array filled with argument values
+ *
+ * Fetches @n arguments to the system call starting with the @i'th argument
+ * (from 0 through 5).  Argument @i is stored in @args[0], and so on.
+ * An arch inline version is probably optimal when @i and @n are constants.
+ *
+ * It's only valid to call this when @task is stopped for tracing on
+ * entry to a system call, due to %TIF_SYSCALL_TRACE or %TIF_SYSCALL_AUDIT.
+ * It's invalid to call this with @i + @n > 6; we only support system calls
+ * taking up to 6 arguments.
+ */
+void syscall_get_arguments(struct task_struct *task, struct pt_regs *regs,
+			   unsigned int i, unsigned int n, unsigned long *args);
+
+/**
+ * syscall_set_arguments - change system call parameter value
+ * @task:	task of interest, must be in system call entry tracing
+ * @regs:	task_pt_regs() of @task
+ * @i:		argument index [0,5]
+ * @n:		number of arguments; n+i must be [1,6].
+ * @args:	array of argument values to store
+ *
+ * Changes @n arguments to the system call starting with the @i'th argument.
+ * @n'th argument to @val.  Argument @i gets value @args[0], and so on.
+ * An arch inline version is probably optimal when @i and @n are constants.
+ *
+ * It's only valid to call this when @task is stopped for tracing on
+ * entry to a system call, due to %TIF_SYSCALL_TRACE or %TIF_SYSCALL_AUDIT.
+ * It's invalid to call this with @i + @n > 6; we only support system calls
+ * taking up to 6 arguments.
+ */
+void syscall_set_arguments(struct task_struct *task, struct pt_regs *regs,
+			   unsigned int i, unsigned int n,
+			   const unsigned long *args);
+
+#endif	/* _ASM_SYSCALL_H */
diff --git a/include/asm-generic/vmlinux.lds.h b/include/asm-generic/vmlinux.lds.h
index 729f6b0a60e9..7440a0dceddb 100644
--- a/include/asm-generic/vmlinux.lds.h
+++ b/include/asm-generic/vmlinux.lds.h
@@ -221,6 +221,7 @@
  * during second ld run in second ld pass when generating System.map */
 #define TEXT_TEXT							\
 		ALIGN_FUNCTION();					\
+		*(.text.hot)						\
 		*(.text)						\
 		*(.ref.text)						\
 		*(.text.init.refok)					\
@@ -230,7 +231,8 @@
 	CPU_KEEP(init.text)						\
 	CPU_KEEP(exit.text)						\
 	MEM_KEEP(init.text)						\
-	MEM_KEEP(exit.text)
+	MEM_KEEP(exit.text)						\
+		*(.text.unlikely)
 
 
 /* sched.text is aling to function alignment to secure we have same
@@ -331,9 +333,9 @@
 #define BUG_TABLE							\
 	. = ALIGN(8);							\
 	__bug_table : AT(ADDR(__bug_table) - LOAD_OFFSET) {		\
-		__start___bug_table = .;				\
+		VMLINUX_SYMBOL(__start___bug_table) = .;		\
 		*(__bug_table)						\
-		__stop___bug_table = .;					\
+		VMLINUX_SYMBOL(__stop___bug_table) = .;			\
 	}
 #else
 #define BUG_TABLE
@@ -343,9 +345,9 @@
 #define TRACEDATA							\
 	. = ALIGN(4);							\
 	.tracedata : AT(ADDR(.tracedata) - LOAD_OFFSET) {		\
-	  	__tracedata_start = .;					\
+		VMLINUX_SYMBOL(__tracedata_start) = .;			\
 		*(.tracedata)						\
-	  	__tracedata_end = .;					\
+		VMLINUX_SYMBOL(__tracedata_end) = .;			\
 	}
 #else
 #define TRACEDATA
@@ -359,6 +361,8 @@
 	}
 
 #define INITCALLS							\
+	*(.initcallearly.init)						\
+	VMLINUX_SYMBOL(__early_initcall_end) = .;			\
   	*(.initcall0.init)						\
   	*(.initcall0s.init)						\
   	*(.initcall1.init)						\
@@ -379,9 +383,10 @@
 
 #define PERCPU(align)							\
 	. = ALIGN(align);						\
-	__per_cpu_start = .;						\
+	VMLINUX_SYMBOL(__per_cpu_start) = .;				\
 	.data.percpu  : AT(ADDR(.data.percpu) - LOAD_OFFSET) {		\
+		*(.data.percpu.page_aligned)				\
 		*(.data.percpu)						\
 		*(.data.percpu.shared_aligned)				\
 	}								\
-	__per_cpu_end = .;
+	VMLINUX_SYMBOL(__per_cpu_end) = .;
diff --git a/include/asm-h8300/elf.h b/include/asm-h8300/elf.h
deleted file mode 100644
index 26bfc7e641da..000000000000
--- a/include/asm-h8300/elf.h
+++ /dev/null
@@ -1,104 +0,0 @@
-#ifndef __ASMH8300_ELF_H
-#define __ASMH8300_ELF_H
-
-/*
- * ELF register definitions..
- */
-
-#include <asm/ptrace.h>
-#include <asm/user.h>
-
-typedef unsigned long elf_greg_t;
-
-#define ELF_NGREG (sizeof(struct user_regs_struct) / sizeof(elf_greg_t))
-typedef elf_greg_t elf_gregset_t[ELF_NGREG];
-typedef unsigned long elf_fpregset_t;
-
-/*
- * This is used to ensure we don't load something for the wrong architecture.
- */
-#define elf_check_arch(x) ((x)->e_machine == EM_H8_300)
-
-/*
- * These are used to set parameters in the core dumps.
- */
-#define ELF_CLASS	ELFCLASS32
-#define ELF_DATA	ELFDATA2MSB
-#define ELF_ARCH	EM_H8_300
-#if defined(__H8300H__)
-#define ELF_FLAGS       0x810000
-#endif
-#if defined(__H8300S__)
-#define ELF_FLAGS       0x820000
-#endif
-
-#define ELF_PLAT_INIT(_r)	_r->er1 = 0
-
-#define USE_ELF_CORE_DUMP
-#define ELF_EXEC_PAGESIZE	4096
-
-/* This is the location that an ET_DYN program is loaded if exec'ed.  Typical
-   use of this is to invoke "./ld.so someprog" to test out a new version of
-   the loader.  We need to make sure that it is out of the way of the program
-   that it will "exec", and that there is sufficient room for the brk.  */
-
-#define ELF_ET_DYN_BASE         0xD0000000UL
-
-/* This yields a mask that user programs can use to figure out what
-   instruction set this cpu supports.  */
-
-#define ELF_HWCAP	(0)
-
-/* This yields a string that ld.so will use to load implementation
-   specific libraries for optimization.  This is more specific in
-   intent than poking at uname or /proc/cpuinfo.  */
-
-#define ELF_PLATFORM  (NULL)
-
-#define SET_PERSONALITY(ex, ibcs2) set_personality(PER_LINUX)
-
-#define R_H8_NONE       0
-#define R_H8_DIR32      1
-#define R_H8_DIR32_28   2
-#define R_H8_DIR32_24   3
-#define R_H8_DIR32_16   4
-#define R_H8_DIR32U     6
-#define R_H8_DIR32U_28  7
-#define R_H8_DIR32U_24  8
-#define R_H8_DIR32U_20  9
-#define R_H8_DIR32U_16 10
-#define R_H8_DIR24     11
-#define R_H8_DIR24_20  12
-#define R_H8_DIR24_16  13
-#define R_H8_DIR24U    14
-#define R_H8_DIR24U_20 15
-#define R_H8_DIR24U_16 16
-#define R_H8_DIR16     17
-#define R_H8_DIR16U    18
-#define R_H8_DIR16S_32 19
-#define R_H8_DIR16S_28 20
-#define R_H8_DIR16S_24 21
-#define R_H8_DIR16S_20 22
-#define R_H8_DIR16S    23
-#define R_H8_DIR8      24
-#define R_H8_DIR8U     25
-#define R_H8_DIR8Z_32  26
-#define R_H8_DIR8Z_28  27
-#define R_H8_DIR8Z_24  28
-#define R_H8_DIR8Z_20  29
-#define R_H8_DIR8Z_16  30
-#define R_H8_PCREL16   31
-#define R_H8_PCREL8    32
-#define R_H8_BPOS      33
-#define R_H8_PCREL32   34
-#define R_H8_GOT32O    35
-#define R_H8_GOT16O    36
-#define R_H8_DIR16A8   59
-#define R_H8_DIR16R8   60
-#define R_H8_DIR24A8   61
-#define R_H8_DIR24R8   62
-#define R_H8_DIR32A16  63
-#define R_H8_ABS32     65
-#define R_H8_ABS32A16 127
-
-#endif
diff --git a/include/asm-h8300/kvm.h b/include/asm-h8300/kvm.h
deleted file mode 100644
index bdbed7b987e1..000000000000
--- a/include/asm-h8300/kvm.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef __LINUX_KVM_H8300_H
-#define __LINUX_KVM_H8300_H
-
-/* h8300 does not support KVM */
-
-#endif
diff --git a/include/asm-h8300/namei.h b/include/asm-h8300/namei.h
deleted file mode 100644
index ab6f196db6e0..000000000000
--- a/include/asm-h8300/namei.h
+++ /dev/null
@@ -1,17 +0,0 @@
-/*
- * linux/include/asm-h8300/namei.h
- *
- * Included from linux/fs/namei.c
- */
-
-#ifndef __H8300_NAMEI_H
-#define __H8300_NAMEI_H
-
-/* This dummy routine maybe changed to something useful
- * for /usr/gnemul/ emulation stuff.
- * Look at asm-sparc/namei.h for details.
- */
-
-#define __emul_prefix() NULL
-
-#endif
diff --git a/include/asm-h8300/thread_info.h b/include/asm-h8300/thread_info.h
deleted file mode 100644
index 27bb95e2944c..000000000000
--- a/include/asm-h8300/thread_info.h
+++ /dev/null
@@ -1,107 +0,0 @@
-/* thread_info.h: h8300 low-level thread information
- * adapted from the i386 and PPC versions by Yoshinori Sato <ysato@users.sourceforge.jp>
- *
- * Copyright (C) 2002  David Howells (dhowells@redhat.com)
- * - Incorporating suggestions made by Linus Torvalds and Dave Miller
- */
-
-#ifndef _ASM_THREAD_INFO_H
-#define _ASM_THREAD_INFO_H
-
-#include <asm/page.h>
-
-#ifdef __KERNEL__
-
-#ifndef __ASSEMBLY__
-
-/*
- * low level task data.
- * If you change this, change the TI_* offsets below to match.
- */
-struct thread_info {
-	struct task_struct *task;		/* main task structure */
-	struct exec_domain *exec_domain;	/* execution domain */
-	unsigned long	   flags;		/* low level flags */
-	int		   cpu;			/* cpu we're on */
-	int		   preempt_count;	/* 0 => preemptable, <0 => BUG */
-	struct restart_block restart_block;
-};
-
-/*
- * macros/functions for gaining access to the thread information structure
- */
-#define INIT_THREAD_INFO(tsk)			\
-{						\
-	.task =		&tsk,			\
-	.exec_domain =	&default_exec_domain,	\
-	.flags =	0,			\
-	.cpu =		0,			\
-	.preempt_count = 1,			\
-	.restart_block	= {			\
-		.fn = do_no_restart_syscall,	\
-	},					\
-}
-
-#define init_thread_info	(init_thread_union.thread_info)
-#define init_stack		(init_thread_union.stack)
-
-
-/*
- * Size of kernel stack for each process. This must be a power of 2...
- */
-#define THREAD_SIZE		8192	/* 2 pages */
-
-
-/* how to get the thread information struct from C */
-static inline struct thread_info *current_thread_info(void)
-{
-	struct thread_info *ti;
-	__asm__(
-		"mov.l	sp, %0 \n\t"
-		"and.l	%1, %0"
-		: "=&r"(ti)
-		: "i" (~(THREAD_SIZE-1))
-		);
-	return ti;
-}
-
-/* thread information allocation */
-#define alloc_thread_info(tsk) ((struct thread_info *) \
-				__get_free_pages(GFP_KERNEL, 1))
-#define free_thread_info(ti)	free_pages((unsigned long) (ti), 1)
-#endif /* __ASSEMBLY__ */
-
-/*
- * Offsets in thread_info structure, used in assembly code
- */
-#define TI_TASK		0
-#define TI_EXECDOMAIN	4
-#define TI_FLAGS	8
-#define TI_CPU		12
-#define TI_PRE_COUNT	16
-
-#define	PREEMPT_ACTIVE	0x4000000
-
-/*
- * thread information flag bit numbers
- */
-#define TIF_SYSCALL_TRACE	0	/* syscall trace active */
-#define TIF_SIGPENDING		1	/* signal pending */
-#define TIF_NEED_RESCHED	2	/* rescheduling necessary */
-#define TIF_POLLING_NRFLAG	3	/* true if poll_idle() is polling
-					   TIF_NEED_RESCHED */
-#define TIF_MEMDIE		4
-#define TIF_RESTORE_SIGMASK	5	/* restore signal mask in do_signal() */
-
-/* as above, but as bit values */
-#define _TIF_SYSCALL_TRACE	(1<<TIF_SYSCALL_TRACE)
-#define _TIF_SIGPENDING		(1<<TIF_SIGPENDING)
-#define _TIF_NEED_RESCHED	(1<<TIF_NEED_RESCHED)
-#define _TIF_POLLING_NRFLAG	(1<<TIF_POLLING_NRFLAG)
-#define _TIF_RESTORE_SIGMASK	(1<<TIF_RESTORE_SIGMASK)
-
-#define _TIF_WORK_MASK		0x0000FFFE	/* work to do on interrupt/exception return */
-
-#endif /* __KERNEL__ */
-
-#endif /* _ASM_THREAD_INFO_H */
diff --git a/include/asm-ia64/cputime.h b/include/asm-ia64/cputime.h
deleted file mode 100644
index f9abdec6577a..000000000000
--- a/include/asm-ia64/cputime.h
+++ /dev/null
@@ -1,110 +0,0 @@
-/*
- * include/asm-ia64/cputime.h:
- *		Definitions for measuring cputime on ia64 machines.
- *
- * Based on <asm-powerpc/cputime.h>.
- *
- * Copyright (C) 2007 FUJITSU LIMITED
- * Copyright (C) 2007 Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- *
- * If we have CONFIG_VIRT_CPU_ACCOUNTING, we measure cpu time in nsec.
- * Otherwise we measure cpu time in jiffies using the generic definitions.
- */
-
-#ifndef __IA64_CPUTIME_H
-#define __IA64_CPUTIME_H
-
-#ifndef CONFIG_VIRT_CPU_ACCOUNTING
-#include <asm-generic/cputime.h>
-#else
-
-#include <linux/time.h>
-#include <linux/jiffies.h>
-#include <asm/processor.h>
-
-typedef u64 cputime_t;
-typedef u64 cputime64_t;
-
-#define cputime_zero			((cputime_t)0)
-#define cputime_max			((~((cputime_t)0) >> 1) - 1)
-#define cputime_add(__a, __b)		((__a) +  (__b))
-#define cputime_sub(__a, __b)		((__a) -  (__b))
-#define cputime_div(__a, __n)		((__a) /  (__n))
-#define cputime_halve(__a)		((__a) >> 1)
-#define cputime_eq(__a, __b)		((__a) == (__b))
-#define cputime_gt(__a, __b)		((__a) >  (__b))
-#define cputime_ge(__a, __b)		((__a) >= (__b))
-#define cputime_lt(__a, __b)		((__a) <  (__b))
-#define cputime_le(__a, __b)		((__a) <= (__b))
-
-#define cputime64_zero			((cputime64_t)0)
-#define cputime64_add(__a, __b)		((__a) + (__b))
-#define cputime64_sub(__a, __b)		((__a) - (__b))
-#define cputime_to_cputime64(__ct)	(__ct)
-
-/*
- * Convert cputime <-> jiffies (HZ)
- */
-#define cputime_to_jiffies(__ct)	((__ct) / (NSEC_PER_SEC / HZ))
-#define jiffies_to_cputime(__jif)	((__jif) * (NSEC_PER_SEC / HZ))
-#define cputime64_to_jiffies64(__ct)	((__ct) / (NSEC_PER_SEC / HZ))
-#define jiffies64_to_cputime64(__jif)	((__jif) * (NSEC_PER_SEC / HZ))
-
-/*
- * Convert cputime <-> milliseconds
- */
-#define cputime_to_msecs(__ct)		((__ct) / NSEC_PER_MSEC)
-#define msecs_to_cputime(__msecs)	((__msecs) * NSEC_PER_MSEC)
-
-/*
- * Convert cputime <-> seconds
- */
-#define cputime_to_secs(__ct)		((__ct) / NSEC_PER_SEC)
-#define secs_to_cputime(__secs)		((__secs) * NSEC_PER_SEC)
-
-/*
- * Convert cputime <-> timespec (nsec)
- */
-static inline cputime_t timespec_to_cputime(const struct timespec *val)
-{
-	cputime_t ret = val->tv_sec * NSEC_PER_SEC;
-	return (ret + val->tv_nsec);
-}
-static inline void cputime_to_timespec(const cputime_t ct, struct timespec *val)
-{
-	val->tv_sec  = ct / NSEC_PER_SEC;
-	val->tv_nsec = ct % NSEC_PER_SEC;
-}
-
-/*
- * Convert cputime <-> timeval (msec)
- */
-static inline cputime_t timeval_to_cputime(struct timeval *val)
-{
-	cputime_t ret = val->tv_sec * NSEC_PER_SEC;
-	return (ret + val->tv_usec * NSEC_PER_USEC);
-}
-static inline void cputime_to_timeval(const cputime_t ct, struct timeval *val)
-{
-	val->tv_sec = ct / NSEC_PER_SEC;
-	val->tv_usec = (ct % NSEC_PER_SEC) / NSEC_PER_USEC;
-}
-
-/*
- * Convert cputime <-> clock (USER_HZ)
- */
-#define cputime_to_clock_t(__ct)	((__ct) / (NSEC_PER_SEC / USER_HZ))
-#define clock_t_to_cputime(__x)		((__x) * (NSEC_PER_SEC / USER_HZ))
-
-/*
- * Convert cputime64 to clock.
- */
-#define cputime64_to_clock_t(__ct)      cputime_to_clock_t((cputime_t)__ct)
-
-#endif /* CONFIG_VIRT_CPU_ACCOUNTING */
-#endif /* __IA64_CPUTIME_H */
diff --git a/include/asm-ia64/io.h b/include/asm-ia64/io.h
deleted file mode 100644
index 260a85ac9d6a..000000000000
--- a/include/asm-ia64/io.h
+++ /dev/null
@@ -1,459 +0,0 @@
-#ifndef _ASM_IA64_IO_H
-#define _ASM_IA64_IO_H
-
-/*
- * This file contains the definitions for the emulated IO instructions
- * inb/inw/inl/outb/outw/outl and the "string versions" of the same
- * (insb/insw/insl/outsb/outsw/outsl). You can also use "pausing"
- * versions of the single-IO instructions (inb_p/inw_p/..).
- *
- * This file is not meant to be obfuscating: it's just complicated to
- * (a) handle it all in a way that makes gcc able to optimize it as
- * well as possible and (b) trying to avoid writing the same thing
- * over and over again with slight variations and possibly making a
- * mistake somewhere.
- *
- * Copyright (C) 1998-2003 Hewlett-Packard Co
- *	David Mosberger-Tang <davidm@hpl.hp.com>
- * Copyright (C) 1999 Asit Mallick <asit.k.mallick@intel.com>
- * Copyright (C) 1999 Don Dugger <don.dugger@intel.com>
- */
-
-/* We don't use IO slowdowns on the ia64, but.. */
-#define __SLOW_DOWN_IO	do { } while (0)
-#define SLOW_DOWN_IO	do { } while (0)
-
-#define __IA64_UNCACHED_OFFSET	RGN_BASE(RGN_UNCACHED)
-
-/*
- * The legacy I/O space defined by the ia64 architecture supports only 65536 ports, but
- * large machines may have multiple other I/O spaces so we can't place any a priori limit
- * on IO_SPACE_LIMIT.  These additional spaces are described in ACPI.
- */
-#define IO_SPACE_LIMIT		0xffffffffffffffffUL
-
-#define MAX_IO_SPACES_BITS		8
-#define MAX_IO_SPACES			(1UL << MAX_IO_SPACES_BITS)
-#define IO_SPACE_BITS			24
-#define IO_SPACE_SIZE			(1UL << IO_SPACE_BITS)
-
-#define IO_SPACE_NR(port)		((port) >> IO_SPACE_BITS)
-#define IO_SPACE_BASE(space)		((space) << IO_SPACE_BITS)
-#define IO_SPACE_PORT(port)		((port) & (IO_SPACE_SIZE - 1))
-
-#define IO_SPACE_SPARSE_ENCODING(p)	((((p) >> 2) << 12) | ((p) & 0xfff))
-
-struct io_space {
-	unsigned long mmio_base;	/* base in MMIO space */
-	int sparse;
-};
-
-extern struct io_space io_space[];
-extern unsigned int num_io_spaces;
-
-# ifdef __KERNEL__
-
-/*
- * All MMIO iomem cookies are in region 6; anything less is a PIO cookie:
- *	0xCxxxxxxxxxxxxxxx	MMIO cookie (return from ioremap)
- *	0x000000001SPPPPPP	PIO cookie (S=space number, P..P=port)
- *
- * ioread/writeX() uses the leading 1 in PIO cookies (PIO_OFFSET) to catch
- * code that uses bare port numbers without the prerequisite pci_iomap().
- */
-#define PIO_OFFSET		(1UL << (MAX_IO_SPACES_BITS + IO_SPACE_BITS))
-#define PIO_MASK		(PIO_OFFSET - 1)
-#define PIO_RESERVED		__IA64_UNCACHED_OFFSET
-#define HAVE_ARCH_PIO_SIZE
-
-#include <asm/intrinsics.h>
-#include <asm/machvec.h>
-#include <asm/page.h>
-#include <asm/system.h>
-#include <asm-generic/iomap.h>
-
-/*
- * Change virtual addresses to physical addresses and vv.
- */
-static inline unsigned long
-virt_to_phys (volatile void *address)
-{
-	return (unsigned long) address - PAGE_OFFSET;
-}
-
-static inline void*
-phys_to_virt (unsigned long address)
-{
-	return (void *) (address + PAGE_OFFSET);
-}
-
-#define ARCH_HAS_VALID_PHYS_ADDR_RANGE
-extern u64 kern_mem_attribute (unsigned long phys_addr, unsigned long size);
-extern int valid_phys_addr_range (unsigned long addr, size_t count); /* efi.c */
-extern int valid_mmap_phys_addr_range (unsigned long pfn, size_t count);
-
-/*
- * The following two macros are deprecated and scheduled for removal.
- * Please use the PCI-DMA interface defined in <asm/pci.h> instead.
- */
-#define bus_to_virt	phys_to_virt
-#define virt_to_bus	virt_to_phys
-#define page_to_bus	page_to_phys
-
-# endif /* KERNEL */
-
-/*
- * Memory fence w/accept.  This should never be used in code that is
- * not IA-64 specific.
- */
-#define __ia64_mf_a()	ia64_mfa()
-
-/**
- * ___ia64_mmiowb - I/O write barrier
- *
- * Ensure ordering of I/O space writes.  This will make sure that writes
- * following the barrier will arrive after all previous writes.  For most
- * ia64 platforms, this is a simple 'mf.a' instruction.
- *
- * See Documentation/DocBook/deviceiobook.tmpl for more information.
- */
-static inline void ___ia64_mmiowb(void)
-{
-	ia64_mfa();
-}
-
-static inline void*
-__ia64_mk_io_addr (unsigned long port)
-{
-	struct io_space *space;
-	unsigned long offset;
-
-	space = &io_space[IO_SPACE_NR(port)];
-	port = IO_SPACE_PORT(port);
-	if (space->sparse)
-		offset = IO_SPACE_SPARSE_ENCODING(port);
-	else
-		offset = port;
-
-	return (void *) (space->mmio_base | offset);
-}
-
-#define __ia64_inb	___ia64_inb
-#define __ia64_inw	___ia64_inw
-#define __ia64_inl	___ia64_inl
-#define __ia64_outb	___ia64_outb
-#define __ia64_outw	___ia64_outw
-#define __ia64_outl	___ia64_outl
-#define __ia64_readb	___ia64_readb
-#define __ia64_readw	___ia64_readw
-#define __ia64_readl	___ia64_readl
-#define __ia64_readq	___ia64_readq
-#define __ia64_readb_relaxed	___ia64_readb
-#define __ia64_readw_relaxed	___ia64_readw
-#define __ia64_readl_relaxed	___ia64_readl
-#define __ia64_readq_relaxed	___ia64_readq
-#define __ia64_writeb	___ia64_writeb
-#define __ia64_writew	___ia64_writew
-#define __ia64_writel	___ia64_writel
-#define __ia64_writeq	___ia64_writeq
-#define __ia64_mmiowb	___ia64_mmiowb
-
-/*
- * For the in/out routines, we need to do "mf.a" _after_ doing the I/O access to ensure
- * that the access has completed before executing other I/O accesses.  Since we're doing
- * the accesses through an uncachable (UC) translation, the CPU will execute them in
- * program order.  However, we still need to tell the compiler not to shuffle them around
- * during optimization, which is why we use "volatile" pointers.
- */
-
-static inline unsigned int
-___ia64_inb (unsigned long port)
-{
-	volatile unsigned char *addr = __ia64_mk_io_addr(port);
-	unsigned char ret;
-
-	ret = *addr;
-	__ia64_mf_a();
-	return ret;
-}
-
-static inline unsigned int
-___ia64_inw (unsigned long port)
-{
-	volatile unsigned short *addr = __ia64_mk_io_addr(port);
-	unsigned short ret;
-
-	ret = *addr;
-	__ia64_mf_a();
-	return ret;
-}
-
-static inline unsigned int
-___ia64_inl (unsigned long port)
-{
-	volatile unsigned int *addr = __ia64_mk_io_addr(port);
-	unsigned int ret;
-
-	ret = *addr;
-	__ia64_mf_a();
-	return ret;
-}
-
-static inline void
-___ia64_outb (unsigned char val, unsigned long port)
-{
-	volatile unsigned char *addr = __ia64_mk_io_addr(port);
-
-	*addr = val;
-	__ia64_mf_a();
-}
-
-static inline void
-___ia64_outw (unsigned short val, unsigned long port)
-{
-	volatile unsigned short *addr = __ia64_mk_io_addr(port);
-
-	*addr = val;
-	__ia64_mf_a();
-}
-
-static inline void
-___ia64_outl (unsigned int val, unsigned long port)
-{
-	volatile unsigned int *addr = __ia64_mk_io_addr(port);
-
-	*addr = val;
-	__ia64_mf_a();
-}
-
-static inline void
-__insb (unsigned long port, void *dst, unsigned long count)
-{
-	unsigned char *dp = dst;
-
-	while (count--)
-		*dp++ = platform_inb(port);
-}
-
-static inline void
-__insw (unsigned long port, void *dst, unsigned long count)
-{
-	unsigned short *dp = dst;
-
-	while (count--)
-		*dp++ = platform_inw(port);
-}
-
-static inline void
-__insl (unsigned long port, void *dst, unsigned long count)
-{
-	unsigned int *dp = dst;
-
-	while (count--)
-		*dp++ = platform_inl(port);
-}
-
-static inline void
-__outsb (unsigned long port, const void *src, unsigned long count)
-{
-	const unsigned char *sp = src;
-
-	while (count--)
-		platform_outb(*sp++, port);
-}
-
-static inline void
-__outsw (unsigned long port, const void *src, unsigned long count)
-{
-	const unsigned short *sp = src;
-
-	while (count--)
-		platform_outw(*sp++, port);
-}
-
-static inline void
-__outsl (unsigned long port, const void *src, unsigned long count)
-{
-	const unsigned int *sp = src;
-
-	while (count--)
-		platform_outl(*sp++, port);
-}
-
-/*
- * Unfortunately, some platforms are broken and do not follow the IA-64 architecture
- * specification regarding legacy I/O support.  Thus, we have to make these operations
- * platform dependent...
- */
-#define __inb		platform_inb
-#define __inw		platform_inw
-#define __inl		platform_inl
-#define __outb		platform_outb
-#define __outw		platform_outw
-#define __outl		platform_outl
-#define __mmiowb	platform_mmiowb
-
-#define inb(p)		__inb(p)
-#define inw(p)		__inw(p)
-#define inl(p)		__inl(p)
-#define insb(p,d,c)	__insb(p,d,c)
-#define insw(p,d,c)	__insw(p,d,c)
-#define insl(p,d,c)	__insl(p,d,c)
-#define outb(v,p)	__outb(v,p)
-#define outw(v,p)	__outw(v,p)
-#define outl(v,p)	__outl(v,p)
-#define outsb(p,s,c)	__outsb(p,s,c)
-#define outsw(p,s,c)	__outsw(p,s,c)
-#define outsl(p,s,c)	__outsl(p,s,c)
-#define mmiowb()	__mmiowb()
-
-/*
- * The address passed to these functions are ioremap()ped already.
- *
- * We need these to be machine vectors since some platforms don't provide
- * DMA coherence via PIO reads (PCI drivers and the spec imply that this is
- * a good idea).  Writes are ok though for all existing ia64 platforms (and
- * hopefully it'll stay that way).
- */
-static inline unsigned char
-___ia64_readb (const volatile void __iomem *addr)
-{
-	return *(volatile unsigned char __force *)addr;
-}
-
-static inline unsigned short
-___ia64_readw (const volatile void __iomem *addr)
-{
-	return *(volatile unsigned short __force *)addr;
-}
-
-static inline unsigned int
-___ia64_readl (const volatile void __iomem *addr)
-{
-	return *(volatile unsigned int __force *) addr;
-}
-
-static inline unsigned long
-___ia64_readq (const volatile void __iomem *addr)
-{
-	return *(volatile unsigned long __force *) addr;
-}
-
-static inline void
-__writeb (unsigned char val, volatile void __iomem *addr)
-{
-	*(volatile unsigned char __force *) addr = val;
-}
-
-static inline void
-__writew (unsigned short val, volatile void __iomem *addr)
-{
-	*(volatile unsigned short __force *) addr = val;
-}
-
-static inline void
-__writel (unsigned int val, volatile void __iomem *addr)
-{
-	*(volatile unsigned int __force *) addr = val;
-}
-
-static inline void
-__writeq (unsigned long val, volatile void __iomem *addr)
-{
-	*(volatile unsigned long __force *) addr = val;
-}
-
-#define __readb		platform_readb
-#define __readw		platform_readw
-#define __readl		platform_readl
-#define __readq		platform_readq
-#define __readb_relaxed	platform_readb_relaxed
-#define __readw_relaxed	platform_readw_relaxed
-#define __readl_relaxed	platform_readl_relaxed
-#define __readq_relaxed	platform_readq_relaxed
-
-#define readb(a)	__readb((a))
-#define readw(a)	__readw((a))
-#define readl(a)	__readl((a))
-#define readq(a)	__readq((a))
-#define readb_relaxed(a)	__readb_relaxed((a))
-#define readw_relaxed(a)	__readw_relaxed((a))
-#define readl_relaxed(a)	__readl_relaxed((a))
-#define readq_relaxed(a)	__readq_relaxed((a))
-#define __raw_readb	readb
-#define __raw_readw	readw
-#define __raw_readl	readl
-#define __raw_readq	readq
-#define __raw_readb_relaxed	readb_relaxed
-#define __raw_readw_relaxed	readw_relaxed
-#define __raw_readl_relaxed	readl_relaxed
-#define __raw_readq_relaxed	readq_relaxed
-#define writeb(v,a)	__writeb((v), (a))
-#define writew(v,a)	__writew((v), (a))
-#define writel(v,a)	__writel((v), (a))
-#define writeq(v,a)	__writeq((v), (a))
-#define __raw_writeb	writeb
-#define __raw_writew	writew
-#define __raw_writel	writel
-#define __raw_writeq	writeq
-
-#ifndef inb_p
-# define inb_p		inb
-#endif
-#ifndef inw_p
-# define inw_p		inw
-#endif
-#ifndef inl_p
-# define inl_p		inl
-#endif
-
-#ifndef outb_p
-# define outb_p		outb
-#endif
-#ifndef outw_p
-# define outw_p		outw
-#endif
-#ifndef outl_p
-# define outl_p		outl
-#endif
-
-# ifdef __KERNEL__
-
-extern void __iomem * ioremap(unsigned long offset, unsigned long size);
-extern void __iomem * ioremap_nocache (unsigned long offset, unsigned long size);
-extern void iounmap (volatile void __iomem *addr);
-
-/*
- * String version of IO memory access ops:
- */
-extern void memcpy_fromio(void *dst, const volatile void __iomem *src, long n);
-extern void memcpy_toio(volatile void __iomem *dst, const void *src, long n);
-extern void memset_io(volatile void __iomem *s, int c, long n);
-
-# endif /* __KERNEL__ */
-
-/*
- * Enabling BIO_VMERGE_BOUNDARY forces us to turn off I/O MMU bypassing.  It is said that
- * BIO-level virtual merging can give up to 4% performance boost (not verified for ia64).
- * On the other hand, we know that I/O MMU bypassing gives ~8% performance improvement on
- * SPECweb-like workloads on zx1-based machines.  Thus, for now we favor I/O MMU bypassing
- * over BIO-level virtual merging.
- */
-extern unsigned long ia64_max_iommu_merge_mask;
-#if 1
-#define BIO_VMERGE_BOUNDARY	0
-#else
-/*
- * It makes no sense at all to have this BIO_VMERGE_BOUNDARY macro here.  Should be
- * replaced by dma_merge_mask() or something of that sort.  Note: the only way
- * BIO_VMERGE_BOUNDARY is used is to mask off bits.  Effectively, our definition gets
- * expanded into:
- *
- *	addr & ((ia64_max_iommu_merge_mask + 1) - 1) == (addr & ia64_max_iommu_vmerge_mask)
- *
- * which is precisely what we want.
- */
-#define BIO_VMERGE_BOUNDARY	(ia64_max_iommu_merge_mask + 1)
-#endif
-
-#endif /* _ASM_IA64_IO_H */
diff --git a/include/asm-ia64/kdebug.h b/include/asm-ia64/kdebug.h
deleted file mode 100644
index 35e49407d06c..000000000000
--- a/include/asm-ia64/kdebug.h
+++ /dev/null
@@ -1,59 +0,0 @@
-#ifndef _IA64_KDEBUG_H
-#define _IA64_KDEBUG_H 1
-/*
- * include/asm-ia64/kdebug.h
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
- *
- * Copyright (C) Intel Corporation, 2005
- *
- * 2005-Apr     Rusty Lynch <rusty.lynch@intel.com> and Anil S Keshavamurthy
- *              <anil.s.keshavamurthy@intel.com> adopted from
- *              include/asm-x86_64/kdebug.h
- *
- * 2005-Oct	Keith Owens <kaos@sgi.com>.  Expand notify_die to cover more
- *		events.
- */
-
-enum die_val {
-	DIE_BREAK = 1,
-	DIE_FAULT,
-	DIE_OOPS,
-	DIE_MACHINE_HALT,
-	DIE_MACHINE_RESTART,
-	DIE_MCA_MONARCH_ENTER,
-	DIE_MCA_MONARCH_PROCESS,
-	DIE_MCA_MONARCH_LEAVE,
-	DIE_MCA_SLAVE_ENTER,
-	DIE_MCA_SLAVE_PROCESS,
-	DIE_MCA_SLAVE_LEAVE,
-	DIE_MCA_RENDZVOUS_ENTER,
-	DIE_MCA_RENDZVOUS_PROCESS,
-	DIE_MCA_RENDZVOUS_LEAVE,
-	DIE_MCA_NEW_TIMEOUT,
-	DIE_INIT_ENTER,
-	DIE_INIT_MONARCH_ENTER,
-	DIE_INIT_MONARCH_PROCESS,
-	DIE_INIT_MONARCH_LEAVE,
-	DIE_INIT_SLAVE_ENTER,
-	DIE_INIT_SLAVE_PROCESS,
-	DIE_INIT_SLAVE_LEAVE,
-	DIE_KDEBUG_ENTER,
-	DIE_KDEBUG_LEAVE,
-	DIE_KDUMP_ENTER,
-	DIE_KDUMP_LEAVE,
-};
-
-#endif
diff --git a/include/asm-ia64/kexec.h b/include/asm-ia64/kexec.h
deleted file mode 100644
index 541be835fc5a..000000000000
--- a/include/asm-ia64/kexec.h
+++ /dev/null
@@ -1,44 +0,0 @@
-#ifndef _ASM_IA64_KEXEC_H
-#define _ASM_IA64_KEXEC_H
-
-
-/* Maximum physical address we can use pages from */
-#define KEXEC_SOURCE_MEMORY_LIMIT (-1UL)
-/* Maximum address we can reach in physical address mode */
-#define KEXEC_DESTINATION_MEMORY_LIMIT (-1UL)
-/* Maximum address we can use for the control code buffer */
-#define KEXEC_CONTROL_MEMORY_LIMIT TASK_SIZE
-
-#define KEXEC_CONTROL_CODE_SIZE (8192 + 8192 + 4096)
-
-/* The native architecture */
-#define KEXEC_ARCH KEXEC_ARCH_IA_64
-
-#define kexec_flush_icache_page(page) do { \
-                unsigned long page_addr = (unsigned long)page_address(page); \
-                flush_icache_range(page_addr, page_addr + PAGE_SIZE); \
-        } while(0)
-
-extern struct kimage *ia64_kimage;
-extern const unsigned int relocate_new_kernel_size;
-extern void relocate_new_kernel(unsigned long, unsigned long,
-		struct ia64_boot_param *, unsigned long);
-static inline void
-crash_setup_regs(struct pt_regs *newregs, struct pt_regs *oldregs)
-{
-}
-extern struct resource efi_memmap_res;
-extern struct resource boot_param_res;
-extern void kdump_smp_send_stop(void);
-extern void kdump_smp_send_init(void);
-extern void kexec_disable_iosapic(void);
-extern void crash_save_this_cpu(void);
-struct rsvd_region;
-extern unsigned long kdump_find_rsvd_region(unsigned long size,
-		struct rsvd_region *rsvd_regions, int n);
-extern void kdump_cpu_freeze(struct unw_frame_info *info, void *arg);
-extern int kdump_status[];
-extern atomic_t kdump_cpu_freezed;
-extern atomic_t kdump_in_progress;
-
-#endif /* _ASM_IA64_KEXEC_H */
diff --git a/include/asm-ia64/kprobes.h b/include/asm-ia64/kprobes.h
deleted file mode 100644
index ef71b57fc2f4..000000000000
--- a/include/asm-ia64/kprobes.h
+++ /dev/null
@@ -1,133 +0,0 @@
-#ifndef _ASM_KPROBES_H
-#define _ASM_KPROBES_H
-/*
- *  Kernel Probes (KProbes)
- *  include/asm-ia64/kprobes.h
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
- *
- * Copyright (C) IBM Corporation, 2002, 2004
- * Copyright (C) Intel Corporation, 2005
- *
- * 2005-Apr     Rusty Lynch <rusty.lynch@intel.com> and Anil S Keshavamurthy
- *              <anil.s.keshavamurthy@intel.com> adapted from i386
- */
-#include <linux/types.h>
-#include <linux/ptrace.h>
-#include <linux/percpu.h>
-#include <asm/break.h>
-
-#define __ARCH_WANT_KPROBES_INSN_SLOT
-#define MAX_INSN_SIZE   2	/* last half is for kprobe-booster */
-#define BREAK_INST	(long)(__IA64_BREAK_KPROBE << 6)
-#define NOP_M_INST	(long)(1<<27)
-#define BRL_INST(i1, i2) ((long)((0xcL << 37) |	/* brl */ \
-				(0x1L << 12) |	/* many */ \
-				(((i1) & 1) << 36) | ((i2) << 13))) /* imm */
-
-typedef union cmp_inst {
-	struct {
-	unsigned long long qp : 6;
-	unsigned long long p1 : 6;
-	unsigned long long c  : 1;
-	unsigned long long r2 : 7;
-	unsigned long long r3 : 7;
-	unsigned long long p2 : 6;
-	unsigned long long ta : 1;
-	unsigned long long x2 : 2;
-	unsigned long long tb : 1;
-	unsigned long long opcode : 4;
-	unsigned long long reserved : 23;
-	}f;
-	unsigned long long l;
-} cmp_inst_t;
-
-struct kprobe;
-
-typedef struct _bundle {
-	struct {
-		unsigned long long template : 5;
-		unsigned long long slot0 : 41;
-		unsigned long long slot1_p0 : 64-46;
-	} quad0;
-	struct {
-		unsigned long long slot1_p1 : 41 - (64-46);
-		unsigned long long slot2 : 41;
-	} quad1;
-} __attribute__((__aligned__(16)))  bundle_t;
-
-struct prev_kprobe {
-	struct kprobe *kp;
-	unsigned long status;
-};
-
-#define	MAX_PARAM_RSE_SIZE	(0x60+0x60/0x3f)
-/* per-cpu kprobe control block */
-#define ARCH_PREV_KPROBE_SZ 2
-struct kprobe_ctlblk {
-	unsigned long kprobe_status;
-	struct pt_regs jprobe_saved_regs;
-	unsigned long jprobes_saved_stacked_regs[MAX_PARAM_RSE_SIZE];
-	unsigned long *bsp;
-	unsigned long cfm;
-	atomic_t prev_kprobe_index;
-	struct prev_kprobe prev_kprobe[ARCH_PREV_KPROBE_SZ];
-};
-
-#define kretprobe_blacklist_size 0
-
-#define SLOT0_OPCODE_SHIFT	(37)
-#define SLOT1_p1_OPCODE_SHIFT	(37 - (64-46))
-#define SLOT2_OPCODE_SHIFT 	(37)
-
-#define INDIRECT_CALL_OPCODE		(1)
-#define IP_RELATIVE_CALL_OPCODE		(5)
-#define IP_RELATIVE_BRANCH_OPCODE	(4)
-#define IP_RELATIVE_PREDICT_OPCODE	(7)
-#define LONG_BRANCH_OPCODE		(0xC)
-#define LONG_CALL_OPCODE		(0xD)
-#define flush_insn_slot(p)		do { } while (0)
-
-typedef struct kprobe_opcode {
-	bundle_t bundle;
-} kprobe_opcode_t;
-
-struct fnptr {
-	unsigned long ip;
-	unsigned long gp;
-};
-
-/* Architecture specific copy of original instruction*/
-struct arch_specific_insn {
-	/* copy of the instruction to be emulated */
-	kprobe_opcode_t *insn;
- #define INST_FLAG_FIX_RELATIVE_IP_ADDR		1
- #define INST_FLAG_FIX_BRANCH_REG		2
- #define INST_FLAG_BREAK_INST			4
- #define INST_FLAG_BOOSTABLE			8
- 	unsigned long inst_flag;
- 	unsigned short target_br_reg;
-	unsigned short slot;
-};
-
-extern int kprobe_fault_handler(struct pt_regs *regs, int trapnr);
-extern int kprobe_exceptions_notify(struct notifier_block *self,
-				    unsigned long val, void *data);
-
-extern void invalidate_stacked_regs(void);
-extern void flush_register_stack(void);
-extern void arch_remove_kprobe(struct kprobe *p);
-
-#endif				/* _ASM_KPROBES_H */
diff --git a/include/asm-ia64/kvm.h b/include/asm-ia64/kvm.h
deleted file mode 100644
index 3f6a090cbd9a..000000000000
--- a/include/asm-ia64/kvm.h
+++ /dev/null
@@ -1,211 +0,0 @@
-#ifndef __ASM_IA64_KVM_H
-#define __ASM_IA64_KVM_H
-
-/*
- * asm-ia64/kvm.h: kvm structure definitions  for ia64
- *
- * Copyright (C) 2007 Xiantao Zhang <xiantao.zhang@intel.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms and conditions of the GNU General Public License,
- * version 2, as published by the Free Software Foundation.
- *
- * This program is distributed in the hope it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * this program; if not, write to the Free Software Foundation, Inc., 59 Temple
- * Place - Suite 330, Boston, MA 02111-1307 USA.
- *
- */
-
-#include <asm/types.h>
-
-#include <linux/ioctl.h>
-
-/* Architectural interrupt line count. */
-#define KVM_NR_INTERRUPTS 256
-
-#define KVM_IOAPIC_NUM_PINS  48
-
-struct kvm_ioapic_state {
-	__u64 base_address;
-	__u32 ioregsel;
-	__u32 id;
-	__u32 irr;
-	__u32 pad;
-	union {
-		__u64 bits;
-		struct {
-			__u8 vector;
-			__u8 delivery_mode:3;
-			__u8 dest_mode:1;
-			__u8 delivery_status:1;
-			__u8 polarity:1;
-			__u8 remote_irr:1;
-			__u8 trig_mode:1;
-			__u8 mask:1;
-			__u8 reserve:7;
-			__u8 reserved[4];
-			__u8 dest_id;
-		} fields;
-	} redirtbl[KVM_IOAPIC_NUM_PINS];
-};
-
-#define KVM_IRQCHIP_PIC_MASTER   0
-#define KVM_IRQCHIP_PIC_SLAVE    1
-#define KVM_IRQCHIP_IOAPIC       2
-
-#define KVM_CONTEXT_SIZE	8*1024
-
-struct kvm_fpreg {
-	union {
-		unsigned long bits[2];
-		long double __dummy;	/* force 16-byte alignment */
-	} u;
-};
-
-union context {
-	/* 8K size */
-	char	dummy[KVM_CONTEXT_SIZE];
-	struct {
-		unsigned long       psr;
-		unsigned long       pr;
-		unsigned long       caller_unat;
-		unsigned long       pad;
-		unsigned long       gr[32];
-		unsigned long       ar[128];
-		unsigned long       br[8];
-		unsigned long       cr[128];
-		unsigned long       rr[8];
-		unsigned long       ibr[8];
-		unsigned long       dbr[8];
-		unsigned long       pkr[8];
-		struct kvm_fpreg   fr[128];
-	};
-};
-
-struct thash_data {
-	union {
-		struct {
-			unsigned long p    :  1; /* 0 */
-			unsigned long rv1  :  1; /* 1 */
-			unsigned long ma   :  3; /* 2-4 */
-			unsigned long a    :  1; /* 5 */
-			unsigned long d    :  1; /* 6 */
-			unsigned long pl   :  2; /* 7-8 */
-			unsigned long ar   :  3; /* 9-11 */
-			unsigned long ppn  : 38; /* 12-49 */
-			unsigned long rv2  :  2; /* 50-51 */
-			unsigned long ed   :  1; /* 52 */
-			unsigned long ig1  : 11; /* 53-63 */
-		};
-		struct {
-			unsigned long __rv1 : 53;     /* 0-52 */
-			unsigned long contiguous : 1; /*53 */
-			unsigned long tc : 1;         /* 54 TR or TC */
-			unsigned long cl : 1;
-			/* 55 I side or D side cache line */
-			unsigned long len  :  4;      /* 56-59 */
-			unsigned long io  : 1;	/* 60 entry is for io or not */
-			unsigned long nomap : 1;
-			/* 61 entry cann't be inserted into machine TLB.*/
-			unsigned long checked : 1;
-			/* 62 for VTLB/VHPT sanity check */
-			unsigned long invalid : 1;
-			/* 63 invalid entry */
-		};
-		unsigned long page_flags;
-	};                  /* same for VHPT and TLB */
-
-	union {
-		struct {
-			unsigned long rv3  :  2;
-			unsigned long ps   :  6;
-			unsigned long key  : 24;
-			unsigned long rv4  : 32;
-		};
-		unsigned long itir;
-	};
-	union {
-		struct {
-			unsigned long ig2  :  12;
-			unsigned long vpn  :  49;
-			unsigned long vrn  :   3;
-		};
-		unsigned long ifa;
-		unsigned long vadr;
-		struct {
-			unsigned long tag  :  63;
-			unsigned long ti   :  1;
-		};
-		unsigned long etag;
-	};
-	union {
-		struct thash_data *next;
-		unsigned long rid;
-		unsigned long gpaddr;
-	};
-};
-
-#define	NITRS	8
-#define NDTRS	8
-
-struct saved_vpd {
-	unsigned long  vhpi;
-	unsigned long  vgr[16];
-	unsigned long  vbgr[16];
-	unsigned long  vnat;
-	unsigned long  vbnat;
-	unsigned long  vcpuid[5];
-	unsigned long  vpsr;
-	unsigned long  vpr;
-	unsigned long  vcr[128];
-};
-
-struct kvm_regs {
-	char *saved_guest;
-	char *saved_stack;
-	struct saved_vpd vpd;
-	/*Arch-regs*/
-	int mp_state;
-	unsigned long vmm_rr;
-	/* TR and TC.  */
-	struct thash_data itrs[NITRS];
-	struct thash_data dtrs[NDTRS];
-	/* Bit is set if there is a tr/tc for the region.  */
-	unsigned char itr_regions;
-	unsigned char dtr_regions;
-	unsigned char tc_regions;
-
-	char irq_check;
-	unsigned long saved_itc;
-	unsigned long itc_check;
-	unsigned long timer_check;
-	unsigned long timer_pending;
-	unsigned long last_itc;
-
-	unsigned long vrr[8];
-	unsigned long ibr[8];
-	unsigned long dbr[8];
-	unsigned long insvc[4];		/* Interrupt in service.  */
-	unsigned long xtp;
-
-	unsigned long metaphysical_rr0; /* from kvm_arch (so is pinned) */
-	unsigned long metaphysical_rr4;	/* from kvm_arch (so is pinned) */
-	unsigned long metaphysical_saved_rr0; /* from kvm_arch          */
-	unsigned long metaphysical_saved_rr4; /* from kvm_arch          */
-	unsigned long fp_psr;       /*used for lazy float register */
-	unsigned long saved_gp;
-	/*for phycial  emulation */
-};
-
-struct kvm_sregs {
-};
-
-struct kvm_fpu {
-};
-
-#endif
diff --git a/include/asm-ia64/namei.h b/include/asm-ia64/namei.h
deleted file mode 100644
index 78e768079083..000000000000
--- a/include/asm-ia64/namei.h
+++ /dev/null
@@ -1,25 +0,0 @@
-#ifndef _ASM_IA64_NAMEI_H
-#define _ASM_IA64_NAMEI_H
-
-/*
- * Modified 1998, 1999, 2001
- *	David Mosberger-Tang <davidm@hpl.hp.com>, Hewlett-Packard Co
- */
-
-#include <asm/ptrace.h>
-#include <asm/system.h>
-
-#define EMUL_PREFIX_LINUX_IA32 "/emul/ia32-linux/"
-
-static inline char *
-__emul_prefix (void)
-{
-	switch (current->personality) {
-	      case PER_LINUX32:
-		return EMUL_PREFIX_LINUX_IA32;
-	      default:
-		return NULL;
-	}
-}
-
-#endif /* _ASM_IA64_NAMEI_H */
diff --git a/include/asm-ia64/native/irq.h b/include/asm-ia64/native/irq.h
deleted file mode 100644
index efe9ff74a3c4..000000000000
--- a/include/asm-ia64/native/irq.h
+++ /dev/null
@@ -1,35 +0,0 @@
-/******************************************************************************
- * include/asm-ia64/native/irq.h
- *
- * Copyright (c) 2008 Isaku Yamahata <yamahata at valinux co jp>
- *                    VA Linux Systems Japan K.K.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- *
- * moved from linux/include/asm-ia64/irq.h.
- */
-
-#ifndef _ASM_IA64_NATIVE_IRQ_H
-#define _ASM_IA64_NATIVE_IRQ_H
-
-#define NR_VECTORS	256
-
-#if (NR_VECTORS + 32 * NR_CPUS) < 1024
-#define IA64_NATIVE_NR_IRQS (NR_VECTORS + 32 * NR_CPUS)
-#else
-#define IA64_NATIVE_NR_IRQS 1024
-#endif
-
-#endif /* _ASM_IA64_NATIVE_IRQ_H */
diff --git a/include/asm-ia64/rwsem.h b/include/asm-ia64/rwsem.h
deleted file mode 100644
index 8aba06a7b038..000000000000
--- a/include/asm-ia64/rwsem.h
+++ /dev/null
@@ -1,182 +0,0 @@
-/*
- * asm-ia64/rwsem.h: R/W semaphores for ia64
- *
- * Copyright (C) 2003 Ken Chen <kenneth.w.chen@intel.com>
- * Copyright (C) 2003 Asit Mallick <asit.k.mallick@intel.com>
- * Copyright (C) 2005 Christoph Lameter <clameter@sgi.com>
- *
- * Based on asm-i386/rwsem.h and other architecture implementation.
- *
- * The MSW of the count is the negated number of active writers and
- * waiting lockers, and the LSW is the total number of active locks.
- *
- * The lock count is initialized to 0 (no active and no waiting lockers).
- *
- * When a writer subtracts WRITE_BIAS, it'll get 0xffffffff00000001 for
- * the case of an uncontended lock. Readers increment by 1 and see a positive
- * value when uncontended, negative if there are writers (and maybe) readers
- * waiting (in which case it goes to sleep).
- */
-
-#ifndef _ASM_IA64_RWSEM_H
-#define _ASM_IA64_RWSEM_H
-
-#ifndef _LINUX_RWSEM_H
-#error "Please don't include <asm/rwsem.h> directly, use <linux/rwsem.h> instead."
-#endif
-
-#include <linux/list.h>
-#include <linux/spinlock.h>
-
-#include <asm/intrinsics.h>
-
-/*
- * the semaphore definition
- */
-struct rw_semaphore {
-	signed long		count;
-	spinlock_t		wait_lock;
-	struct list_head	wait_list;
-};
-
-#define RWSEM_UNLOCKED_VALUE		__IA64_UL_CONST(0x0000000000000000)
-#define RWSEM_ACTIVE_BIAS		__IA64_UL_CONST(0x0000000000000001)
-#define RWSEM_ACTIVE_MASK		__IA64_UL_CONST(0x00000000ffffffff)
-#define RWSEM_WAITING_BIAS		-__IA64_UL_CONST(0x0000000100000000)
-#define RWSEM_ACTIVE_READ_BIAS		RWSEM_ACTIVE_BIAS
-#define RWSEM_ACTIVE_WRITE_BIAS		(RWSEM_WAITING_BIAS + RWSEM_ACTIVE_BIAS)
-
-#define __RWSEM_INITIALIZER(name) \
-	{ RWSEM_UNLOCKED_VALUE, SPIN_LOCK_UNLOCKED, \
-	  LIST_HEAD_INIT((name).wait_list) }
-
-#define DECLARE_RWSEM(name) \
-	struct rw_semaphore name = __RWSEM_INITIALIZER(name)
-
-extern struct rw_semaphore *rwsem_down_read_failed(struct rw_semaphore *sem);
-extern struct rw_semaphore *rwsem_down_write_failed(struct rw_semaphore *sem);
-extern struct rw_semaphore *rwsem_wake(struct rw_semaphore *sem);
-extern struct rw_semaphore *rwsem_downgrade_wake(struct rw_semaphore *sem);
-
-static inline void
-init_rwsem (struct rw_semaphore *sem)
-{
-	sem->count = RWSEM_UNLOCKED_VALUE;
-	spin_lock_init(&sem->wait_lock);
-	INIT_LIST_HEAD(&sem->wait_list);
-}
-
-/*
- * lock for reading
- */
-static inline void
-__down_read (struct rw_semaphore *sem)
-{
-	long result = ia64_fetchadd8_acq((unsigned long *)&sem->count, 1);
-
-	if (result < 0)
-		rwsem_down_read_failed(sem);
-}
-
-/*
- * lock for writing
- */
-static inline void
-__down_write (struct rw_semaphore *sem)
-{
-	long old, new;
-
-	do {
-		old = sem->count;
-		new = old + RWSEM_ACTIVE_WRITE_BIAS;
-	} while (cmpxchg_acq(&sem->count, old, new) != old);
-
-	if (old != 0)
-		rwsem_down_write_failed(sem);
-}
-
-/*
- * unlock after reading
- */
-static inline void
-__up_read (struct rw_semaphore *sem)
-{
-	long result = ia64_fetchadd8_rel((unsigned long *)&sem->count, -1);
-
-	if (result < 0 && (--result & RWSEM_ACTIVE_MASK) == 0)
-		rwsem_wake(sem);
-}
-
-/*
- * unlock after writing
- */
-static inline void
-__up_write (struct rw_semaphore *sem)
-{
-	long old, new;
-
-	do {
-		old = sem->count;
-		new = old - RWSEM_ACTIVE_WRITE_BIAS;
-	} while (cmpxchg_rel(&sem->count, old, new) != old);
-
-	if (new < 0 && (new & RWSEM_ACTIVE_MASK) == 0)
-		rwsem_wake(sem);
-}
-
-/*
- * trylock for reading -- returns 1 if successful, 0 if contention
- */
-static inline int
-__down_read_trylock (struct rw_semaphore *sem)
-{
-	long tmp;
-	while ((tmp = sem->count) >= 0) {
-		if (tmp == cmpxchg_acq(&sem->count, tmp, tmp+1)) {
-			return 1;
-		}
-	}
-	return 0;
-}
-
-/*
- * trylock for writing -- returns 1 if successful, 0 if contention
- */
-static inline int
-__down_write_trylock (struct rw_semaphore *sem)
-{
-	long tmp = cmpxchg_acq(&sem->count, RWSEM_UNLOCKED_VALUE,
-			      RWSEM_ACTIVE_WRITE_BIAS);
-	return tmp == RWSEM_UNLOCKED_VALUE;
-}
-
-/*
- * downgrade write lock to read lock
- */
-static inline void
-__downgrade_write (struct rw_semaphore *sem)
-{
-	long old, new;
-
-	do {
-		old = sem->count;
-		new = old - RWSEM_WAITING_BIAS;
-	} while (cmpxchg_rel(&sem->count, old, new) != old);
-
-	if (old < 0)
-		rwsem_downgrade_wake(sem);
-}
-
-/*
- * Implement atomic add functionality.  These used to be "inline" functions, but GCC v3.1
- * doesn't quite optimize this stuff right and ends up with bad calls to fetchandadd.
- */
-#define rwsem_atomic_add(delta, sem)	atomic64_add(delta, (atomic64_t *)(&(sem)->count))
-#define rwsem_atomic_update(delta, sem)	atomic64_add_return(delta, (atomic64_t *)(&(sem)->count))
-
-static inline int rwsem_is_locked(struct rw_semaphore *sem)
-{
-	return (sem->count != 0);
-}
-
-#endif /* _ASM_IA64_RWSEM_H */
diff --git a/include/asm-ia64/serial.h b/include/asm-ia64/serial.h
deleted file mode 100644
index 0c7a2f3dcf13..000000000000
--- a/include/asm-ia64/serial.h
+++ /dev/null
@@ -1,19 +0,0 @@
-/*
- * include/asm-ia64/serial.h
- *
- * Derived from the i386 version.
- */
-
-/*
- * This assumes you have a 1.8432 MHz clock for your UART.
- *
- * It'd be nice if someone built a serial card with a 24.576 MHz
- * clock, since the 16550A is capable of handling a top speed of 1.5
- * megabits/second; but this requires the faster clock.
- */
-#define BASE_BAUD ( 1843200 / 16 )
-
-/*
- * All legacy serial ports should be enumerated via ACPI namespace, so
- * we need not list them here.
- */
diff --git a/include/asm-ia64/thread_info.h b/include/asm-ia64/thread_info.h
deleted file mode 100644
index 2422ac61658a..000000000000
--- a/include/asm-ia64/thread_info.h
+++ /dev/null
@@ -1,146 +0,0 @@
-/*
- * Copyright (C) 2002-2003 Hewlett-Packard Co
- *	David Mosberger-Tang <davidm@hpl.hp.com>
- */
-#ifndef _ASM_IA64_THREAD_INFO_H
-#define _ASM_IA64_THREAD_INFO_H
-
-#ifndef ASM_OFFSETS_C
-#include <asm/asm-offsets.h>
-#endif
-#include <asm/processor.h>
-#include <asm/ptrace.h>
-
-#define PREEMPT_ACTIVE_BIT 30
-#define PREEMPT_ACTIVE	(1 << PREEMPT_ACTIVE_BIT)
-
-#ifndef __ASSEMBLY__
-
-/*
- * On IA-64, we want to keep the task structure and kernel stack together, so they can be
- * mapped by a single TLB entry and so they can be addressed by the "current" pointer
- * without having to do pointer masking.
- */
-struct thread_info {
-	struct task_struct *task;	/* XXX not really needed, except for dup_task_struct() */
-	struct exec_domain *exec_domain;/* execution domain */
-	__u32 flags;			/* thread_info flags (see TIF_*) */
-	__u32 cpu;			/* current CPU */
-	__u32 last_cpu;			/* Last CPU thread ran on */
-	__u32 status;			/* Thread synchronous flags */
-	mm_segment_t addr_limit;	/* user-level address space limit */
-	int preempt_count;		/* 0=premptable, <0=BUG; will also serve as bh-counter */
-	struct restart_block restart_block;
-#ifdef CONFIG_VIRT_CPU_ACCOUNTING
-	__u64 ac_stamp;
-	__u64 ac_leave;
-	__u64 ac_stime;
-	__u64 ac_utime;
-#endif
-};
-
-#define THREAD_SIZE			KERNEL_STACK_SIZE
-
-#define INIT_THREAD_INFO(tsk)			\
-{						\
-	.task		= &tsk,			\
-	.exec_domain	= &default_exec_domain,	\
-	.flags		= 0,			\
-	.cpu		= 0,			\
-	.addr_limit	= KERNEL_DS,		\
-	.preempt_count	= 0,			\
-	.restart_block = {			\
-		.fn = do_no_restart_syscall,	\
-	},					\
-}
-
-#ifndef ASM_OFFSETS_C
-/* how to get the thread information struct from C */
-#define current_thread_info()	((struct thread_info *) ((char *) current + IA64_TASK_SIZE))
-#define alloc_thread_info(tsk)	((struct thread_info *) ((char *) (tsk) + IA64_TASK_SIZE))
-#define task_thread_info(tsk)	((struct thread_info *) ((char *) (tsk) + IA64_TASK_SIZE))
-#else
-#define current_thread_info()	((struct thread_info *) 0)
-#define alloc_thread_info(tsk)	((struct thread_info *) 0)
-#define task_thread_info(tsk)	((struct thread_info *) 0)
-#endif
-#define free_thread_info(ti)	/* nothing */
-#define task_stack_page(tsk)	((void *)(tsk))
-
-#define __HAVE_THREAD_FUNCTIONS
-#ifdef CONFIG_VIRT_CPU_ACCOUNTING
-#define setup_thread_stack(p, org)			\
-	*task_thread_info(p) = *task_thread_info(org);	\
-	task_thread_info(p)->ac_stime = 0;		\
-	task_thread_info(p)->ac_utime = 0;		\
-	task_thread_info(p)->task = (p);
-#else
-#define setup_thread_stack(p, org) \
-	*task_thread_info(p) = *task_thread_info(org); \
-	task_thread_info(p)->task = (p);
-#endif
-#define end_of_stack(p) (unsigned long *)((void *)(p) + IA64_RBS_OFFSET)
-
-#define __HAVE_ARCH_TASK_STRUCT_ALLOCATOR
-#define alloc_task_struct()	((struct task_struct *)__get_free_pages(GFP_KERNEL | __GFP_COMP, KERNEL_STACK_SIZE_ORDER))
-#define free_task_struct(tsk)	free_pages((unsigned long) (tsk), KERNEL_STACK_SIZE_ORDER)
-
-#define tsk_set_notify_resume(tsk) \
-	set_ti_thread_flag(task_thread_info(tsk), TIF_NOTIFY_RESUME)
-extern void tsk_clear_notify_resume(struct task_struct *tsk);
-#endif /* !__ASSEMBLY */
-
-/*
- * thread information flags
- * - these are process state flags that various assembly files may need to access
- * - pending work-to-be-done flags are in least-significant 16 bits, other flags
- *   in top 16 bits
- */
-#define TIF_SIGPENDING		0	/* signal pending */
-#define TIF_NEED_RESCHED	1	/* rescheduling necessary */
-#define TIF_SYSCALL_TRACE	2	/* syscall trace active */
-#define TIF_SYSCALL_AUDIT	3	/* syscall auditing active */
-#define TIF_SINGLESTEP		4	/* restore singlestep on return to user mode */
-#define TIF_NOTIFY_RESUME	6	/* resumption notification requested */
-#define TIF_POLLING_NRFLAG	16	/* true if poll_idle() is polling TIF_NEED_RESCHED */
-#define TIF_MEMDIE		17
-#define TIF_MCA_INIT		18	/* this task is processing MCA or INIT */
-#define TIF_DB_DISABLED		19	/* debug trap disabled for fsyscall */
-#define TIF_FREEZE		20	/* is freezing for suspend */
-#define TIF_RESTORE_RSE		21	/* user RBS is newer than kernel RBS */
-
-#define _TIF_SYSCALL_TRACE	(1 << TIF_SYSCALL_TRACE)
-#define _TIF_SYSCALL_AUDIT	(1 << TIF_SYSCALL_AUDIT)
-#define _TIF_SINGLESTEP		(1 << TIF_SINGLESTEP)
-#define _TIF_SYSCALL_TRACEAUDIT	(_TIF_SYSCALL_TRACE|_TIF_SYSCALL_AUDIT|_TIF_SINGLESTEP)
-#define _TIF_NOTIFY_RESUME	(1 << TIF_NOTIFY_RESUME)
-#define _TIF_SIGPENDING		(1 << TIF_SIGPENDING)
-#define _TIF_NEED_RESCHED	(1 << TIF_NEED_RESCHED)
-#define _TIF_POLLING_NRFLAG	(1 << TIF_POLLING_NRFLAG)
-#define _TIF_MCA_INIT		(1 << TIF_MCA_INIT)
-#define _TIF_DB_DISABLED	(1 << TIF_DB_DISABLED)
-#define _TIF_FREEZE		(1 << TIF_FREEZE)
-#define _TIF_RESTORE_RSE	(1 << TIF_RESTORE_RSE)
-
-/* "work to do on user-return" bits */
-#define TIF_ALLWORK_MASK	(_TIF_SIGPENDING|_TIF_NOTIFY_RESUME|_TIF_SYSCALL_AUDIT|\
-				 _TIF_NEED_RESCHED|_TIF_SYSCALL_TRACE)
-/* like TIF_ALLWORK_BITS but sans TIF_SYSCALL_TRACE or TIF_SYSCALL_AUDIT */
-#define TIF_WORK_MASK		(TIF_ALLWORK_MASK&~(_TIF_SYSCALL_TRACE|_TIF_SYSCALL_AUDIT))
-
-#define TS_POLLING		1 	/* true if in idle loop and not sleeping */
-#define TS_RESTORE_SIGMASK	2	/* restore signal mask in do_signal() */
-
-#define tsk_is_polling(t) (task_thread_info(t)->status & TS_POLLING)
-
-#ifndef __ASSEMBLY__
-#define HAVE_SET_RESTORE_SIGMASK	1
-static inline void set_restore_sigmask(void)
-{
-	struct thread_info *ti = current_thread_info();
-	ti->status |= TS_RESTORE_SIGMASK;
-	set_bit(TIF_SIGPENDING, &ti->flags);
-}
-#endif	/* !__ASSEMBLY__ */
-
-#endif /* _ASM_IA64_THREAD_INFO_H */
diff --git a/include/asm-ia64/topology.h b/include/asm-ia64/topology.h
deleted file mode 100644
index 32863b3bb1d3..000000000000
--- a/include/asm-ia64/topology.h
+++ /dev/null
@@ -1,128 +0,0 @@
-/*
- * linux/include/asm-ia64/topology.h
- *
- * Copyright (C) 2002, Erich Focht, NEC
- *
- * All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-#ifndef _ASM_IA64_TOPOLOGY_H
-#define _ASM_IA64_TOPOLOGY_H
-
-#include <asm/acpi.h>
-#include <asm/numa.h>
-#include <asm/smp.h>
-
-#ifdef CONFIG_NUMA
-
-/* Nodes w/o CPUs are preferred for memory allocations, see build_zonelists */
-#define PENALTY_FOR_NODE_WITH_CPUS 255
-
-/*
- * Distance above which we begin to use zone reclaim
- */
-#define RECLAIM_DISTANCE 15
-
-/*
- * Returns the number of the node containing CPU 'cpu'
- */
-#define cpu_to_node(cpu) (int)(cpu_to_node_map[cpu])
-
-/*
- * Returns a bitmask of CPUs on Node 'node'.
- */
-#define node_to_cpumask(node) (node_to_cpu_mask[node])
-
-/*
- * Returns the number of the node containing Node 'nid'.
- * Not implemented here. Multi-level hierarchies detected with
- * the help of node_distance().
- */
-#define parent_node(nid) (nid)
-
-/*
- * Returns the number of the first CPU on Node 'node'.
- */
-#define node_to_first_cpu(node) (first_cpu(node_to_cpumask(node)))
-
-/*
- * Determines the node for a given pci bus
- */
-#define pcibus_to_node(bus) PCI_CONTROLLER(bus)->node
-
-void build_cpu_to_node_map(void);
-
-#define SD_CPU_INIT (struct sched_domain) {		\
-	.span			= CPU_MASK_NONE,	\
-	.parent			= NULL,			\
-	.child			= NULL,			\
-	.groups			= NULL,			\
-	.min_interval		= 1,			\
-	.max_interval		= 4,			\
-	.busy_factor		= 64,			\
-	.imbalance_pct		= 125,			\
-	.cache_nice_tries	= 2,			\
-	.busy_idx		= 2,			\
-	.idle_idx		= 1,			\
-	.newidle_idx		= 2,			\
-	.wake_idx		= 1,			\
-	.forkexec_idx		= 1,			\
-	.flags			= SD_LOAD_BALANCE	\
-				| SD_BALANCE_NEWIDLE	\
-				| SD_BALANCE_EXEC	\
-				| SD_WAKE_AFFINE,	\
-	.last_balance		= jiffies,		\
-	.balance_interval	= 1,			\
-	.nr_balance_failed	= 0,			\
-}
-
-/* sched_domains SD_NODE_INIT for IA64 NUMA machines */
-#define SD_NODE_INIT (struct sched_domain) {		\
-	.span			= CPU_MASK_NONE,	\
-	.parent			= NULL,			\
-	.child			= NULL,			\
-	.groups			= NULL,			\
-	.min_interval		= 8,			\
-	.max_interval		= 8*(min(num_online_cpus(), 32)), \
-	.busy_factor		= 64,			\
-	.imbalance_pct		= 125,			\
-	.cache_nice_tries	= 2,			\
-	.busy_idx		= 3,			\
-	.idle_idx		= 2,			\
-	.newidle_idx		= 2,			\
-	.wake_idx		= 1,			\
-	.forkexec_idx		= 1,			\
-	.flags			= SD_LOAD_BALANCE	\
-				| SD_BALANCE_EXEC	\
-				| SD_BALANCE_FORK	\
-				| SD_SERIALIZE		\
-				| SD_WAKE_BALANCE,	\
-	.last_balance		= jiffies,		\
-	.balance_interval	= 64,			\
-	.nr_balance_failed	= 0,			\
-}
-
-#endif /* CONFIG_NUMA */
-
-#ifdef CONFIG_SMP
-#define topology_physical_package_id(cpu)	(cpu_data(cpu)->socket_id)
-#define topology_core_id(cpu)			(cpu_data(cpu)->core_id)
-#define topology_core_siblings(cpu)		(cpu_core_map[cpu])
-#define topology_thread_siblings(cpu)		(per_cpu(cpu_sibling_map, cpu))
-#define smt_capable() 				(smp_num_siblings > 1)
-#endif
-
-extern void arch_fix_phys_package_id(int num, u32 slot);
-
-#define pcibus_to_cpumask(bus)	(pcibus_to_node(bus) == -1 ? \
-					CPU_MASK_ALL : \
-					node_to_cpumask(pcibus_to_node(bus)) \
-				)
-
-#include <asm-generic/topology.h>
-
-#endif /* _ASM_IA64_TOPOLOGY_H */
diff --git a/include/asm-ia64/unistd.h b/include/asm-ia64/unistd.h
deleted file mode 100644
index e60314716122..000000000000
--- a/include/asm-ia64/unistd.h
+++ /dev/null
@@ -1,378 +0,0 @@
-#ifndef _ASM_IA64_UNISTD_H
-#define _ASM_IA64_UNISTD_H
-
-/*
- * IA-64 Linux syscall numbers and inline-functions.
- *
- * Copyright (C) 1998-2005 Hewlett-Packard Co
- *	David Mosberger-Tang <davidm@hpl.hp.com>
- */
-
-#include <asm/break.h>
-
-#define __BREAK_SYSCALL			__IA64_BREAK_SYSCALL
-
-#define __NR_ni_syscall			1024
-#define __NR_exit			1025
-#define __NR_read			1026
-#define __NR_write			1027
-#define __NR_open			1028
-#define __NR_close			1029
-#define __NR_creat			1030
-#define __NR_link			1031
-#define __NR_unlink			1032
-#define __NR_execve			1033
-#define __NR_chdir			1034
-#define __NR_fchdir			1035
-#define __NR_utimes			1036
-#define __NR_mknod			1037
-#define __NR_chmod			1038
-#define __NR_chown			1039
-#define __NR_lseek			1040
-#define __NR_getpid			1041
-#define __NR_getppid			1042
-#define __NR_mount			1043
-#define __NR_umount			1044
-#define __NR_setuid			1045
-#define __NR_getuid			1046
-#define __NR_geteuid			1047
-#define __NR_ptrace			1048
-#define __NR_access			1049
-#define __NR_sync			1050
-#define __NR_fsync			1051
-#define __NR_fdatasync			1052
-#define __NR_kill			1053
-#define __NR_rename			1054
-#define __NR_mkdir			1055
-#define __NR_rmdir			1056
-#define __NR_dup			1057
-#define __NR_pipe			1058
-#define __NR_times			1059
-#define __NR_brk			1060
-#define __NR_setgid			1061
-#define __NR_getgid			1062
-#define __NR_getegid			1063
-#define __NR_acct			1064
-#define __NR_ioctl			1065
-#define __NR_fcntl			1066
-#define __NR_umask			1067
-#define __NR_chroot			1068
-#define __NR_ustat			1069
-#define __NR_dup2			1070
-#define __NR_setreuid			1071
-#define __NR_setregid			1072
-#define __NR_getresuid			1073
-#define __NR_setresuid			1074
-#define __NR_getresgid			1075
-#define __NR_setresgid			1076
-#define __NR_getgroups			1077
-#define __NR_setgroups			1078
-#define __NR_getpgid			1079
-#define __NR_setpgid			1080
-#define __NR_setsid			1081
-#define __NR_getsid			1082
-#define __NR_sethostname		1083
-#define __NR_setrlimit			1084
-#define __NR_getrlimit			1085
-#define __NR_getrusage			1086
-#define __NR_gettimeofday		1087
-#define __NR_settimeofday		1088
-#define __NR_select			1089
-#define __NR_poll			1090
-#define __NR_symlink			1091
-#define __NR_readlink			1092
-#define __NR_uselib			1093
-#define __NR_swapon			1094
-#define __NR_swapoff			1095
-#define __NR_reboot			1096
-#define __NR_truncate			1097
-#define __NR_ftruncate			1098
-#define __NR_fchmod			1099
-#define __NR_fchown			1100
-#define __NR_getpriority		1101
-#define __NR_setpriority		1102
-#define __NR_statfs			1103
-#define __NR_fstatfs			1104
-#define __NR_gettid			1105
-#define __NR_semget			1106
-#define __NR_semop			1107
-#define __NR_semctl			1108
-#define __NR_msgget			1109
-#define __NR_msgsnd			1110
-#define __NR_msgrcv			1111
-#define __NR_msgctl			1112
-#define __NR_shmget			1113
-#define __NR_shmat			1114
-#define __NR_shmdt			1115
-#define __NR_shmctl			1116
-/* also known as klogctl() in GNU libc: */
-#define __NR_syslog			1117
-#define __NR_setitimer			1118
-#define __NR_getitimer			1119
-/* 1120 was __NR_old_stat */
-/* 1121 was __NR_old_lstat */
-/* 1122 was __NR_old_fstat */
-#define __NR_vhangup			1123
-#define __NR_lchown			1124
-#define __NR_remap_file_pages		1125
-#define __NR_wait4			1126
-#define __NR_sysinfo			1127
-#define __NR_clone			1128
-#define __NR_setdomainname		1129
-#define __NR_uname			1130
-#define __NR_adjtimex			1131
-/* 1132 was __NR_create_module */
-#define __NR_init_module		1133
-#define __NR_delete_module		1134
-/* 1135 was __NR_get_kernel_syms */
-/* 1136 was __NR_query_module */
-#define __NR_quotactl			1137
-#define __NR_bdflush			1138
-#define __NR_sysfs			1139
-#define __NR_personality		1140
-#define __NR_afs_syscall		1141
-#define __NR_setfsuid			1142
-#define __NR_setfsgid			1143
-#define __NR_getdents			1144
-#define __NR_flock			1145
-#define __NR_readv			1146
-#define __NR_writev			1147
-#define __NR_pread64			1148
-#define __NR_pwrite64			1149
-#define __NR__sysctl			1150
-#define __NR_mmap			1151
-#define __NR_munmap			1152
-#define __NR_mlock			1153
-#define __NR_mlockall			1154
-#define __NR_mprotect			1155
-#define __NR_mremap			1156
-#define __NR_msync			1157
-#define __NR_munlock			1158
-#define __NR_munlockall			1159
-#define __NR_sched_getparam		1160
-#define __NR_sched_setparam		1161
-#define __NR_sched_getscheduler		1162
-#define __NR_sched_setscheduler		1163
-#define __NR_sched_yield		1164
-#define __NR_sched_get_priority_max	1165
-#define __NR_sched_get_priority_min	1166
-#define __NR_sched_rr_get_interval	1167
-#define __NR_nanosleep			1168
-#define __NR_nfsservctl			1169
-#define __NR_prctl			1170
-/* 1171 is reserved for backwards compatibility with old __NR_getpagesize */
-#define __NR_mmap2			1172
-#define __NR_pciconfig_read		1173
-#define __NR_pciconfig_write		1174
-#define __NR_perfmonctl			1175
-#define __NR_sigaltstack		1176
-#define __NR_rt_sigaction		1177
-#define __NR_rt_sigpending		1178
-#define __NR_rt_sigprocmask		1179
-#define __NR_rt_sigqueueinfo		1180
-#define __NR_rt_sigreturn		1181
-#define __NR_rt_sigsuspend		1182
-#define __NR_rt_sigtimedwait		1183
-#define __NR_getcwd			1184
-#define __NR_capget			1185
-#define __NR_capset			1186
-#define __NR_sendfile			1187
-#define __NR_getpmsg			1188
-#define __NR_putpmsg			1189
-#define __NR_socket			1190
-#define __NR_bind			1191
-#define __NR_connect			1192
-#define __NR_listen			1193
-#define __NR_accept			1194
-#define __NR_getsockname		1195
-#define __NR_getpeername		1196
-#define __NR_socketpair			1197
-#define __NR_send			1198
-#define __NR_sendto			1199
-#define __NR_recv			1200
-#define __NR_recvfrom			1201
-#define __NR_shutdown			1202
-#define __NR_setsockopt			1203
-#define __NR_getsockopt			1204
-#define __NR_sendmsg			1205
-#define __NR_recvmsg			1206
-#define __NR_pivot_root			1207
-#define __NR_mincore			1208
-#define __NR_madvise			1209
-#define __NR_stat			1210
-#define __NR_lstat			1211
-#define __NR_fstat			1212
-#define __NR_clone2			1213
-#define __NR_getdents64			1214
-#define __NR_getunwind			1215
-#define __NR_readahead			1216
-#define __NR_setxattr			1217
-#define __NR_lsetxattr			1218
-#define __NR_fsetxattr			1219
-#define __NR_getxattr			1220
-#define __NR_lgetxattr			1221
-#define __NR_fgetxattr			1222
-#define __NR_listxattr			1223
-#define __NR_llistxattr			1224
-#define __NR_flistxattr			1225
-#define __NR_removexattr		1226
-#define __NR_lremovexattr		1227
-#define __NR_fremovexattr		1228
-#define __NR_tkill			1229
-#define __NR_futex			1230
-#define __NR_sched_setaffinity		1231
-#define __NR_sched_getaffinity		1232
-#define __NR_set_tid_address		1233
-#define __NR_fadvise64			1234
-#define __NR_tgkill			1235
-#define __NR_exit_group			1236
-#define __NR_lookup_dcookie		1237
-#define __NR_io_setup			1238
-#define __NR_io_destroy			1239
-#define __NR_io_getevents		1240
-#define __NR_io_submit			1241
-#define __NR_io_cancel			1242
-#define __NR_epoll_create		1243
-#define __NR_epoll_ctl			1244
-#define __NR_epoll_wait			1245
-#define __NR_restart_syscall		1246
-#define __NR_semtimedop			1247
-#define __NR_timer_create		1248
-#define __NR_timer_settime		1249
-#define __NR_timer_gettime		1250
-#define __NR_timer_getoverrun		1251
-#define __NR_timer_delete		1252
-#define __NR_clock_settime		1253
-#define __NR_clock_gettime		1254
-#define __NR_clock_getres		1255
-#define __NR_clock_nanosleep		1256
-#define __NR_fstatfs64			1257
-#define __NR_statfs64			1258
-#define __NR_mbind			1259
-#define __NR_get_mempolicy		1260
-#define __NR_set_mempolicy		1261
-#define __NR_mq_open			1262
-#define __NR_mq_unlink			1263
-#define __NR_mq_timedsend		1264
-#define __NR_mq_timedreceive		1265
-#define __NR_mq_notify			1266
-#define __NR_mq_getsetattr		1267
-#define __NR_kexec_load			1268
-#define __NR_vserver			1269
-#define __NR_waitid			1270
-#define __NR_add_key			1271
-#define __NR_request_key		1272
-#define __NR_keyctl			1273
-#define __NR_ioprio_set			1274
-#define __NR_ioprio_get			1275
-#define __NR_move_pages			1276
-#define __NR_inotify_init		1277
-#define __NR_inotify_add_watch		1278
-#define __NR_inotify_rm_watch		1279
-#define __NR_migrate_pages		1280
-#define __NR_openat			1281
-#define __NR_mkdirat			1282
-#define __NR_mknodat			1283
-#define __NR_fchownat			1284
-#define __NR_futimesat			1285
-#define __NR_newfstatat			1286
-#define __NR_unlinkat			1287
-#define __NR_renameat			1288
-#define __NR_linkat			1289
-#define __NR_symlinkat			1290
-#define __NR_readlinkat			1291
-#define __NR_fchmodat			1292
-#define __NR_faccessat			1293
-#define __NR_pselect6			1294
-#define __NR_ppoll			1295
-#define __NR_unshare			1296
-#define __NR_splice			1297
-#define __NR_set_robust_list		1298
-#define __NR_get_robust_list		1299
-#define __NR_sync_file_range		1300
-#define __NR_tee			1301
-#define __NR_vmsplice			1302
-#define __NR_fallocate			1303
-#define __NR_getcpu			1304
-#define __NR_epoll_pwait		1305
-#define __NR_utimensat			1306
-#define __NR_signalfd			1307
-#define __NR_timerfd			1308
-#define __NR_eventfd			1309
-#define __NR_timerfd_create		1310
-#define __NR_timerfd_settime		1311
-#define __NR_timerfd_gettime		1312
-
-#ifdef __KERNEL__
-
-
-#define NR_syscalls			289 /* length of syscall table */
-
-/*
- * The following defines stop scripts/checksyscalls.sh from complaining about
- * unimplemented system calls.  Glibc provides for each of these by using
- * more modern equivalent system calls.
- */
-#define __IGNORE_fork		/* clone() */
-#define __IGNORE_time		/* gettimeofday() */
-#define __IGNORE_alarm		/* setitimer(ITIMER_REAL, ... */
-#define __IGNORE_pause		/* rt_sigprocmask(), rt_sigsuspend() */
-#define __IGNORE_utime		/* utimes() */
-#define __IGNORE_getpgrp	/* getpgid() */
-#define __IGNORE_vfork		/* clone() */
-
-#define __ARCH_WANT_SYS_RT_SIGACTION
-#define __ARCH_WANT_SYS_RT_SIGSUSPEND
-
-#ifdef CONFIG_IA32_SUPPORT
-# define __ARCH_WANT_SYS_FADVISE64
-# define __ARCH_WANT_SYS_GETPGRP
-# define __ARCH_WANT_SYS_LLSEEK
-# define __ARCH_WANT_SYS_NICE
-# define __ARCH_WANT_SYS_OLD_GETRLIMIT
-# define __ARCH_WANT_SYS_OLDUMOUNT
-# define __ARCH_WANT_SYS_SIGPENDING
-# define __ARCH_WANT_SYS_SIGPROCMASK
-# define __ARCH_WANT_COMPAT_SYS_RT_SIGSUSPEND
-# define __ARCH_WANT_COMPAT_SYS_TIME
-#endif
-
-#if !defined(__ASSEMBLY__) && !defined(ASSEMBLER)
-
-#include <linux/types.h>
-#include <linux/linkage.h>
-#include <linux/compiler.h>
-
-extern long __ia64_syscall (long a0, long a1, long a2, long a3, long a4, long nr);
-
-asmlinkage unsigned long sys_mmap(
-				unsigned long addr, unsigned long len,
-				int prot, int flags,
-				int fd, long off);
-asmlinkage unsigned long sys_mmap2(
-				unsigned long addr, unsigned long len,
-				int prot, int flags,
-				int fd, long pgoff);
-struct pt_regs;
-struct sigaction;
-long sys_execve(char __user *filename, char __user * __user *argv,
-			   char __user * __user *envp, struct pt_regs *regs);
-asmlinkage long sys_pipe(void);
-asmlinkage long sys_rt_sigaction(int sig,
-				 const struct sigaction __user *act,
-				 struct sigaction __user *oact,
-				 size_t sigsetsize);
-
-/*
- * "Conditional" syscalls
- *
- * Note, this macro can only be used in the file which defines sys_ni_syscall, i.e., in
- * kernel/sys_ni.c.  This version causes warnings because the declaration isn't a
- * proper prototype, but we can't use __typeof__ either, because not all cond_syscall()
- * declarations have prototypes at the moment.
- */
-#define cond_syscall(x) asmlinkage long x (void) __attribute__((weak,alias("sys_ni_syscall")))
-
-#endif /* !__ASSEMBLY__ */
-#endif /* __KERNEL__ */
-#endif /* _ASM_IA64_UNISTD_H */
diff --git a/include/asm-ia64/xor.h b/include/asm-ia64/xor.h
deleted file mode 100644
index 41fb8744d17a..000000000000
--- a/include/asm-ia64/xor.h
+++ /dev/null
@@ -1,33 +0,0 @@
-/*
- * include/asm-ia64/xor.h
- *
- * Optimized RAID-5 checksumming functions for IA-64.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2, or (at your option)
- * any later version.
- *
- * You should have received a copy of the GNU General Public License
- * (for example /usr/src/linux/COPYING); if not, write to the Free
- * Software Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-
-extern void xor_ia64_2(unsigned long, unsigned long *, unsigned long *);
-extern void xor_ia64_3(unsigned long, unsigned long *, unsigned long *,
-		       unsigned long *);
-extern void xor_ia64_4(unsigned long, unsigned long *, unsigned long *,
-		       unsigned long *, unsigned long *);
-extern void xor_ia64_5(unsigned long, unsigned long *, unsigned long *,
-		       unsigned long *, unsigned long *, unsigned long *);
-
-static struct xor_block_template xor_block_ia64 = {
-	.name =	"ia64",
-	.do_2 =	xor_ia64_2,
-	.do_3 =	xor_ia64_3,
-	.do_4 =	xor_ia64_4,
-	.do_5 =	xor_ia64_5,
-};
-
-#define XOR_TRY_TEMPLATES	xor_speed(&xor_block_ia64)
diff --git a/include/asm-m32r/kvm.h b/include/asm-m32r/kvm.h
deleted file mode 100644
index 99a40515b77e..000000000000
--- a/include/asm-m32r/kvm.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef __LINUX_KVM_M32R_H
-#define __LINUX_KVM_M32R_H
-
-/* m32r does not support KVM */
-
-#endif
diff --git a/include/asm-m32r/namei.h b/include/asm-m32r/namei.h
deleted file mode 100644
index 210f8056b805..000000000000
--- a/include/asm-m32r/namei.h
+++ /dev/null
@@ -1,17 +0,0 @@
-#ifndef _ASM_M32R_NAMEI_H
-#define _ASM_M32R_NAMEI_H
-
-/*
- * linux/include/asm-m32r/namei.h
- *
- * Included from linux/fs/namei.c
- */
-
-/* This dummy routine maybe changed to something useful
- * for /usr/gnemul/ emulation stuff.
- * Look at asm-sparc/namei.h for details.
- */
-
-#define __emul_prefix() NULL
-
-#endif /* _ASM_M32R_NAMEI_H */
diff --git a/include/asm-m32r/thread_info.h b/include/asm-m32r/thread_info.h
index 1effcd0f5e63..8589d462df27 100644
--- a/include/asm-m32r/thread_info.h
+++ b/include/asm-m32r/thread_info.h
@@ -94,6 +94,8 @@ static inline struct thread_info *current_thread_info(void)
 	return ti;
 }
 
+#define __HAVE_ARCH_THREAD_INFO_ALLOCATOR
+
 /* thread information allocation */
 #ifdef CONFIG_DEBUG_STACK_USAGE
 #define alloc_thread_info(tsk)					\
diff --git a/include/asm-m68k/contregs.h b/include/asm-m68k/contregs.h
index 1e233e7d191e..d1ea750bddfe 100644
--- a/include/asm-m68k/contregs.h
+++ b/include/asm-m68k/contregs.h
@@ -1,4 +1,53 @@
 #ifndef _M68K_CONTREGS_H
 #define _M68K_CONTREGS_H
-#include <asm-sparc/contregs.h>
+
+/* contregs.h:  Addresses of registers in the ASI_CONTROL alternate address
+ *              space. These are for the mmu's context register, etc.
+ *
+ * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
+ */
+
+/* 3=sun3
+   4=sun4 (as in sun4 sysmaint student book)
+   c=sun4c (according to davem) */
+
+#define AC_IDPROM     0x00000000    /* 34  ID PROM, R/O, byte, 32 bytes      */
+#define AC_PAGEMAP    0x10000000    /* 3   Pagemap R/W, long                 */
+#define AC_SEGMAP     0x20000000    /* 3   Segment map, byte                 */
+#define AC_CONTEXT    0x30000000    /* 34c current mmu-context               */
+#define AC_SENABLE    0x40000000    /* 34c system dvma/cache/reset enable reg*/
+#define AC_UDVMA_ENB  0x50000000    /* 34  Not used on Sun boards, byte      */
+#define AC_BUS_ERROR  0x60000000    /* 34  Not cleared on read, byte.        */
+#define AC_SYNC_ERR   0x60000000    /*  c fault type                         */
+#define AC_SYNC_VA    0x60000004    /*  c fault virtual address              */
+#define AC_ASYNC_ERR  0x60000008    /*  c asynchronous fault type            */
+#define AC_ASYNC_VA   0x6000000c    /*  c async fault virtual address        */
+#define AC_LEDS       0x70000000    /* 34  Zero turns on LEDs, byte          */
+#define AC_CACHETAGS  0x80000000    /* 34c direct access to the VAC tags     */
+#define AC_CACHEDDATA 0x90000000    /* 3 c direct access to the VAC data     */
+#define AC_UDVMA_MAP  0xD0000000    /* 4  Not used on Sun boards, byte       */
+#define AC_VME_VECTOR 0xE0000000    /* 4  For non-Autovector VME, byte       */
+#define AC_BOOT_SCC   0xF0000000    /* 34  bypass to access Zilog 8530. byte.*/
+
+/* s=Swift, h=Ross_HyperSPARC, v=TI_Viking, t=Tsunami, r=Ross_Cypress        */
+#define AC_M_PCR      0x0000        /* shv Processor Control Reg             */
+#define AC_M_CTPR     0x0100        /* shv Context Table Pointer Reg         */
+#define AC_M_CXR      0x0200        /* shv Context Register                  */
+#define AC_M_SFSR     0x0300        /* shv Synchronous Fault Status Reg      */
+#define AC_M_SFAR     0x0400        /* shv Synchronous Fault Address Reg     */
+#define AC_M_AFSR     0x0500        /*  hv Asynchronous Fault Status Reg     */
+#define AC_M_AFAR     0x0600        /*  hv Asynchronous Fault Address Reg    */
+#define AC_M_RESET    0x0700        /*  hv Reset Reg                         */
+#define AC_M_RPR      0x1000        /*  hv Root Pointer Reg                  */
+#define AC_M_TSUTRCR  0x1000        /* s   TLB Replacement Ctrl Reg          */
+#define AC_M_IAPTP    0x1100        /*  hv Instruction Access PTP            */
+#define AC_M_DAPTP    0x1200        /*  hv Data Access PTP                   */
+#define AC_M_ITR      0x1300        /*  hv Index Tag Register                */
+#define AC_M_TRCR     0x1400        /*  hv TLB Replacement Control Reg       */
+#define AC_M_SFSRX    0x1300        /* s   Synch Fault Status Reg prim       */
+#define AC_M_SFARX    0x1400        /* s   Synch Fault Address Reg prim      */
+#define AC_M_RPR1     0x1500        /*  h  Root Pointer Reg (entry 2)        */
+#define AC_M_IAPTP1   0x1600        /*  h  Instruction Access PTP (entry 2)  */
+#define AC_M_DAPTP1   0x1700        /*  h  Data Access PTP (entry 2)         */
+
 #endif /* _M68K_CONTREGS_H */
diff --git a/include/asm-m68k/dma-mapping.h b/include/asm-m68k/dma-mapping.h
index a26cdeb46a57..91f7944333d4 100644
--- a/include/asm-m68k/dma-mapping.h
+++ b/include/asm-m68k/dma-mapping.h
@@ -84,7 +84,7 @@ static inline void dma_sync_sg_for_cpu(struct device *dev, struct scatterlist *s
 {
 }
 
-static inline int dma_mapping_error(dma_addr_t handle)
+static inline int dma_mapping_error(struct device *dev, dma_addr_t handle)
 {
 	return 0;
 }
diff --git a/include/asm-m68k/fbio.h b/include/asm-m68k/fbio.h
index c17edf8c7bc4..b9215a0907d3 100644
--- a/include/asm-m68k/fbio.h
+++ b/include/asm-m68k/fbio.h
@@ -1 +1,330 @@
-#include <asm-sparc/fbio.h>
+#ifndef __LINUX_FBIO_H
+#define __LINUX_FBIO_H
+
+#include <linux/compiler.h>
+#include <linux/types.h>
+
+/* Constants used for fbio SunOS compatibility */
+/* (C) 1996 Miguel de Icaza */
+
+/* Frame buffer types */
+#define FBTYPE_NOTYPE           -1
+#define FBTYPE_SUN1BW           0   /* mono */
+#define FBTYPE_SUN1COLOR        1 
+#define FBTYPE_SUN2BW           2 
+#define FBTYPE_SUN2COLOR        3 
+#define FBTYPE_SUN2GP           4 
+#define FBTYPE_SUN5COLOR        5 
+#define FBTYPE_SUN3COLOR        6 
+#define FBTYPE_MEMCOLOR         7 
+#define FBTYPE_SUN4COLOR        8 
+ 
+#define FBTYPE_NOTSUN1          9 
+#define FBTYPE_NOTSUN2          10
+#define FBTYPE_NOTSUN3          11
+ 
+#define FBTYPE_SUNFAST_COLOR    12  /* cg6 */
+#define FBTYPE_SUNROP_COLOR     13
+#define FBTYPE_SUNFB_VIDEO      14
+#define FBTYPE_SUNGIFB          15
+#define FBTYPE_SUNGPLAS         16
+#define FBTYPE_SUNGP3           17
+#define FBTYPE_SUNGT            18
+#define FBTYPE_SUNLEO           19      /* zx Leo card */
+#define FBTYPE_MDICOLOR         20      /* cg14 */
+#define FBTYPE_TCXCOLOR		21	/* SUNW,tcx card */
+
+#define FBTYPE_LASTPLUSONE      21	/* This is not last + 1 in fact... */
+
+/* Does not seem to be listed in the Sun file either */
+#define FBTYPE_CREATOR          22
+#define FBTYPE_PCI_IGA1682	23
+#define FBTYPE_P9100COLOR	24
+
+#define FBTYPE_PCI_GENERIC	1000
+#define FBTYPE_PCI_MACH64	1001
+
+/* fbio ioctls */
+/* Returned by FBIOGTYPE */
+struct  fbtype {
+        int     fb_type;        /* fb type, see above */
+        int     fb_height;      /* pixels */
+        int     fb_width;       /* pixels */
+        int     fb_depth;
+        int     fb_cmsize;      /* color map entries */
+        int     fb_size;        /* fb size in bytes */
+};
+#define FBIOGTYPE _IOR('F', 0, struct fbtype)
+
+struct  fbcmap {
+        int             index;          /* first element (0 origin) */
+        int             count;
+        unsigned char   __user *red;
+        unsigned char   __user *green;
+        unsigned char   __user *blue;
+};
+
+#ifdef __KERNEL__
+#define FBIOPUTCMAP_SPARC _IOW('F', 3, struct fbcmap)
+#define FBIOGETCMAP_SPARC _IOW('F', 4, struct fbcmap)
+#else
+#define FBIOPUTCMAP _IOW('F', 3, struct fbcmap)
+#define FBIOGETCMAP _IOW('F', 4, struct fbcmap)
+#endif
+
+/* # of device specific values */
+#define FB_ATTR_NDEVSPECIFIC    8
+/* # of possible emulations */
+#define FB_ATTR_NEMUTYPES       4
+ 
+struct fbsattr {
+        int     flags;
+        int     emu_type;	/* -1 if none */
+        int     dev_specific[FB_ATTR_NDEVSPECIFIC];
+};
+ 
+struct fbgattr {
+        int     real_type;	/* real frame buffer type */
+        int     owner;		/* unknown */
+        struct fbtype fbtype;	/* real frame buffer fbtype */
+        struct fbsattr sattr;   
+        int     emu_types[FB_ATTR_NEMUTYPES]; /* supported emulations */
+};
+#define FBIOSATTR  _IOW('F', 5, struct fbgattr) /* Unsupported: */
+#define FBIOGATTR  _IOR('F', 6, struct fbgattr)	/* supported */
+
+#define FBIOSVIDEO _IOW('F', 7, int)
+#define FBIOGVIDEO _IOR('F', 8, int)
+
+struct fbcursor {
+        short set;              /* what to set, choose from the list above */
+        short enable;           /* cursor on/off */
+        struct fbcurpos pos;    /* cursor position */
+        struct fbcurpos hot;    /* cursor hot spot */
+        struct fbcmap cmap;     /* color map info */
+        struct fbcurpos size;   /* cursor bit map size */
+        char __user *image;     /* cursor image bits */
+        char __user *mask;      /* cursor mask bits */
+};
+
+/* set/get cursor attributes/shape */
+#define FBIOSCURSOR     _IOW('F', 24, struct fbcursor)
+#define FBIOGCURSOR     _IOWR('F', 25, struct fbcursor)
+ 
+/* set/get cursor position */
+#define FBIOSCURPOS     _IOW('F', 26, struct fbcurpos)
+#define FBIOGCURPOS     _IOW('F', 27, struct fbcurpos)
+ 
+/* get max cursor size */
+#define FBIOGCURMAX     _IOR('F', 28, struct fbcurpos)
+
+/* wid manipulation */
+struct fb_wid_alloc {
+#define FB_WID_SHARED_8		0
+#define FB_WID_SHARED_24	1
+#define FB_WID_DBL_8		2
+#define FB_WID_DBL_24		3
+	__u32	wa_type;
+	__s32	wa_index;	/* Set on return */
+	__u32	wa_count;	
+};
+struct fb_wid_item {
+	__u32	wi_type;
+	__s32	wi_index;
+	__u32	wi_attrs;
+	__u32	wi_values[32];
+};
+struct fb_wid_list {
+	__u32	wl_flags;
+	__u32	wl_count;
+	struct fb_wid_item	*wl_list;
+};
+
+#define FBIO_WID_ALLOC	_IOWR('F', 30, struct fb_wid_alloc)
+#define FBIO_WID_FREE	_IOW('F', 31, struct fb_wid_alloc)
+#define FBIO_WID_PUT	_IOW('F', 32, struct fb_wid_list)
+#define FBIO_WID_GET	_IOWR('F', 33, struct fb_wid_list)
+
+/* Creator ioctls */
+#define FFB_IOCTL	('F'<<8)
+#define FFB_SYS_INFO		(FFB_IOCTL|80)
+#define FFB_CLUTREAD		(FFB_IOCTL|81)
+#define FFB_CLUTPOST		(FFB_IOCTL|82)
+#define FFB_SETDIAGMODE		(FFB_IOCTL|83)
+#define FFB_GETMONITORID	(FFB_IOCTL|84)
+#define FFB_GETVIDEOMODE	(FFB_IOCTL|85)
+#define FFB_SETVIDEOMODE	(FFB_IOCTL|86)
+#define FFB_SETSERVER		(FFB_IOCTL|87)
+#define FFB_SETOVCTL		(FFB_IOCTL|88)
+#define FFB_GETOVCTL		(FFB_IOCTL|89)
+#define FFB_GETSAXNUM		(FFB_IOCTL|90)
+#define FFB_FBDEBUG		(FFB_IOCTL|91)
+
+/* Cg14 ioctls */
+#define MDI_IOCTL          ('M'<<8)
+#define MDI_RESET          (MDI_IOCTL|1)
+#define MDI_GET_CFGINFO    (MDI_IOCTL|2)
+#define MDI_SET_PIXELMODE  (MDI_IOCTL|3)
+#    define MDI_32_PIX     32
+#    define MDI_16_PIX     16
+#    define MDI_8_PIX      8
+
+struct mdi_cfginfo {
+	int     mdi_ncluts;     /* Number of implemented CLUTs in this MDI */
+        int     mdi_type;       /* FBTYPE name */
+        int     mdi_height;     /* height */
+        int     mdi_width;      /* widht */
+        int     mdi_size;       /* available ram */
+        int     mdi_mode;       /* 8bpp, 16bpp or 32bpp */
+        int     mdi_pixfreq;    /* pixel clock (from PROM) */
+};
+
+/* SparcLinux specific ioctl for the MDI, should be replaced for
+ * the SET_XLUT/SET_CLUTn ioctls instead
+ */
+#define MDI_CLEAR_XLUT       (MDI_IOCTL|9)
+
+/* leo & ffb ioctls */
+struct fb_clut_alloc {
+	__u32	clutid;	/* Set on return */
+ 	__u32	flag;
+ 	__u32	index;
+};
+
+struct fb_clut {
+#define FB_CLUT_WAIT	0x00000001	/* Not yet implemented */
+ 	__u32	flag;
+ 	__u32	clutid;
+ 	__u32	offset;
+ 	__u32	count;
+ 	char *	red;
+ 	char *	green;
+ 	char *	blue;
+};
+
+struct fb_clut32 {
+ 	__u32	flag;
+ 	__u32	clutid;
+ 	__u32	offset;
+ 	__u32	count;
+ 	__u32	red;
+ 	__u32	green;
+ 	__u32	blue;
+};
+
+#define LEO_CLUTALLOC	_IOWR('L', 53, struct fb_clut_alloc)
+#define LEO_CLUTFREE	_IOW('L', 54, struct fb_clut_alloc)
+#define LEO_CLUTREAD	_IOW('L', 55, struct fb_clut)
+#define LEO_CLUTPOST	_IOW('L', 56, struct fb_clut)
+#define LEO_SETGAMMA	_IOW('L', 68, int) /* Not yet implemented */
+#define LEO_GETGAMMA	_IOR('L', 69, int) /* Not yet implemented */
+
+#ifdef __KERNEL__
+/* Addresses on the fd of a cgsix that are mappable */
+#define CG6_FBC    0x70000000
+#define CG6_TEC    0x70001000
+#define CG6_BTREGS 0x70002000
+#define CG6_FHC    0x70004000
+#define CG6_THC    0x70005000
+#define CG6_ROM    0x70006000
+#define CG6_RAM    0x70016000
+#define CG6_DHC    0x80000000
+
+#define CG3_MMAP_OFFSET 0x4000000
+
+/* Addresses on the fd of a tcx that are mappable */
+#define TCX_RAM8BIT   		0x00000000
+#define TCX_RAM24BIT   		0x01000000
+#define TCX_UNK3   		0x10000000
+#define TCX_UNK4   		0x20000000
+#define TCX_CONTROLPLANE   	0x28000000
+#define TCX_UNK6   		0x30000000
+#define TCX_UNK7   		0x38000000
+#define TCX_TEC    		0x70000000
+#define TCX_BTREGS 		0x70002000
+#define TCX_THC    		0x70004000
+#define TCX_DHC    		0x70008000
+#define TCX_ALT	   		0x7000a000
+#define TCX_SYNC   		0x7000e000
+#define TCX_UNK2    		0x70010000
+
+/* CG14 definitions */
+
+/* Offsets into the OBIO space: */
+#define CG14_REGS        0       /* registers */
+#define CG14_CURSORREGS  0x1000  /* cursor registers */
+#define CG14_DACREGS     0x2000  /* DAC registers */
+#define CG14_XLUT        0x3000  /* X Look Up Table -- ??? */
+#define CG14_CLUT1       0x4000  /* Color Look Up Table */
+#define CG14_CLUT2       0x5000  /* Color Look Up Table */
+#define CG14_CLUT3       0x6000  /* Color Look Up Table */
+#define CG14_AUTO	 0xf000
+
+#endif /* KERNEL */
+
+/* These are exported to userland for applications to use */
+/* Mappable offsets for the cg14: control registers */
+#define MDI_DIRECT_MAP 0x10000000
+#define MDI_CTLREG_MAP 0x20000000
+#define MDI_CURSOR_MAP 0x30000000
+#define MDI_SHDW_VRT_MAP 0x40000000
+
+/* Mappable offsets for the cg14: frame buffer resolutions */
+/* 32 bits */
+#define MDI_CHUNKY_XBGR_MAP 0x50000000
+#define MDI_CHUNKY_BGR_MAP 0x60000000
+
+/* 16 bits */
+#define MDI_PLANAR_X16_MAP 0x70000000
+#define MDI_PLANAR_C16_MAP 0x80000000
+
+/* 8 bit is done as CG3 MMAP offset */
+/* 32 bits, planar */
+#define MDI_PLANAR_X32_MAP 0x90000000
+#define MDI_PLANAR_B32_MAP 0xa0000000
+#define MDI_PLANAR_G32_MAP 0xb0000000
+#define MDI_PLANAR_R32_MAP 0xc0000000
+
+/* Mappable offsets on leo */
+#define LEO_SS0_MAP            0x00000000
+#define LEO_LC_SS0_USR_MAP     0x00800000
+#define LEO_LD_SS0_MAP         0x00801000
+#define LEO_LX_CURSOR_MAP      0x00802000
+#define LEO_SS1_MAP            0x00803000
+#define LEO_LC_SS1_USR_MAP     0x01003000
+#define LEO_LD_SS1_MAP         0x01004000
+#define LEO_UNK_MAP            0x01005000
+#define LEO_LX_KRN_MAP         0x01006000
+#define LEO_LC_SS0_KRN_MAP     0x01007000
+#define LEO_LC_SS1_KRN_MAP     0x01008000
+#define LEO_LD_GBL_MAP         0x01009000
+#define LEO_UNK2_MAP           0x0100a000
+
+#ifdef __KERNEL__
+struct  fbcmap32 {
+	int             index;          /* first element (0 origin) */
+	int             count;
+	u32		red;
+	u32		green;
+	u32		blue;
+};
+
+#define FBIOPUTCMAP32	_IOW('F', 3, struct fbcmap32)
+#define FBIOGETCMAP32	_IOW('F', 4, struct fbcmap32)
+
+struct fbcursor32 {
+	short set;		/* what to set, choose from the list above */
+	short enable;		/* cursor on/off */
+	struct fbcurpos pos;	/* cursor position */
+	struct fbcurpos hot;	/* cursor hot spot */
+	struct fbcmap32 cmap;	/* color map info */
+	struct fbcurpos size;	/* cursor bit map size */
+	u32	image;		/* cursor image bits */
+	u32	mask;		/* cursor mask bits */
+};
+
+#define FBIOSCURSOR32	_IOW('F', 24, struct fbcursor32)
+#define FBIOGCURSOR32	_IOW('F', 25, struct fbcursor32)
+#endif
+
+#endif /* __LINUX_FBIO_H */
diff --git a/include/asm-m68k/idprom.h b/include/asm-m68k/idprom.h
index 4349eaf3cfe4..160616a89e05 100644
--- a/include/asm-m68k/idprom.h
+++ b/include/asm-m68k/idprom.h
@@ -1,6 +1,25 @@
 #ifndef _M68K_IDPROM_H
 #define _M68K_IDPROM_H
-#include <asm-sparc/idprom.h>
+/*
+ * idprom.h: Macros and defines for idprom routines
+ *
+ * Copyright (C) 1995,1996 David S. Miller (davem@caip.rutgers.edu)
+ */
+
+#include <linux/types.h>
+
+struct idprom {
+	u8		id_format;	/* Format identifier (always 0x01) */
+	u8		id_machtype;	/* Machine type */
+	u8		id_ethaddr[6];	/* Hardware ethernet address */
+	s32		id_date;	/* Date of manufacture */
+	u32		id_sernum:24;	/* Unique serial number */
+	u8		id_cksum;	/* Checksum - xor of the data bytes */
+	u8		reserved[16];
+};
+
+extern struct idprom *idprom;
+extern void idprom_init(void);
 
 /* Sun3: in control space */
 #define SUN3_IDPROM_BASE	0x00000000
diff --git a/include/asm-m68k/kvm.h b/include/asm-m68k/kvm.h
deleted file mode 100644
index 7ed27fce5240..000000000000
--- a/include/asm-m68k/kvm.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef __LINUX_KVM_M68K_H
-#define __LINUX_KVM_M68K_H
-
-/* m68k does not support KVM */
-
-#endif
diff --git a/include/asm-m68k/namei.h b/include/asm-m68k/namei.h
deleted file mode 100644
index f33f243b644a..000000000000
--- a/include/asm-m68k/namei.h
+++ /dev/null
@@ -1,17 +0,0 @@
-/*
- * linux/include/asm-m68k/namei.h
- *
- * Included from linux/fs/namei.c
- */
-
-#ifndef __M68K_NAMEI_H
-#define __M68K_NAMEI_H
-
-/* This dummy routine maybe changed to something useful
- * for /usr/gnemul/ emulation stuff.
- * Look at asm-sparc/namei.h for details.
- */
-
-#define __emul_prefix() NULL
-
-#endif
diff --git a/include/asm-m68k/thread_info.h b/include/asm-m68k/thread_info.h
index d635a3752488..abc002798a2b 100644
--- a/include/asm-m68k/thread_info.h
+++ b/include/asm-m68k/thread_info.h
@@ -25,13 +25,7 @@ struct thread_info {
 }
 
 /* THREAD_SIZE should be 8k, so handle differently for 4k and 8k machines */
-#if PAGE_SHIFT == 13 /* 8k machines */
-#define alloc_thread_info(tsk)   ((struct thread_info *)__get_free_pages(GFP_KERNEL,0))
-#define free_thread_info(ti)  free_pages((unsigned long)(ti),0)
-#else /* otherwise assume 4k pages */
-#define alloc_thread_info(tsk)   ((struct thread_info *)__get_free_pages(GFP_KERNEL,1))
-#define free_thread_info(ti)  free_pages((unsigned long)(ti),1)
-#endif /* PAGE_SHIFT == 13 */
+#define THREAD_SIZE_ORDER (13 - PAGE_SHIFT)
 
 #define init_thread_info	(init_task.thread.info)
 #define init_stack		(init_thread_union.stack)
diff --git a/include/asm-m68k/unistd.h b/include/asm-m68k/unistd.h
index e72ba563f102..965abb8bc7ff 100644
--- a/include/asm-m68k/unistd.h
+++ b/include/asm-m68k/unistd.h
@@ -325,10 +325,16 @@
 #define __NR_fallocate		320
 #define __NR_timerfd_settime	321
 #define __NR_timerfd_gettime	322
+#define __NR_signalfd4		323
+#define __NR_eventfd2		324
+#define __NR_epoll_create1	325
+#define __NR_dup3		326
+#define __NR_pipe2		327
+#define __NR_inotify_init1	328
 
 #ifdef __KERNEL__
 
-#define NR_syscalls		323
+#define NR_syscalls		329
 
 #define __ARCH_WANT_IPC_PARSE_VERSION
 #define __ARCH_WANT_OLD_READDIR
diff --git a/include/asm-m68knommu/kvm.h b/include/asm-m68knommu/kvm.h
deleted file mode 100644
index b49d4258dabb..000000000000
--- a/include/asm-m68knommu/kvm.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef __LINUX_KVM_M68KNOMMU_H
-#define __LINUX_KVM_M68KNOMMU_H
-
-/* m68knommu does not support KVM */
-
-#endif
diff --git a/include/asm-m68knommu/namei.h b/include/asm-m68knommu/namei.h
deleted file mode 100644
index 31a85d27b931..000000000000
--- a/include/asm-m68knommu/namei.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-m68k/namei.h>
diff --git a/include/asm-m68knommu/ptrace.h b/include/asm-m68knommu/ptrace.h
deleted file mode 100644
index 47258e86e8c4..000000000000
--- a/include/asm-m68knommu/ptrace.h
+++ /dev/null
@@ -1,89 +0,0 @@
-#ifndef _M68K_PTRACE_H
-#define _M68K_PTRACE_H
-
-#define PT_D1	   0
-#define PT_D2	   1
-#define PT_D3	   2
-#define PT_D4	   3
-#define PT_D5	   4
-#define PT_D6	   5
-#define PT_D7	   6
-#define PT_A0	   7
-#define PT_A1	   8
-#define PT_A2	   9
-#define PT_A3	   10
-#define PT_A4	   11
-#define PT_A5	   12
-#define PT_A6	   13
-#define PT_D0	   14
-#define PT_USP	   15
-#define PT_ORIG_D0 16
-#define PT_SR	   17
-#define PT_PC	   18
-
-#ifndef __ASSEMBLY__
-
-/* this struct defines the way the registers are stored on the
-   stack during a system call. */
-
-struct pt_regs {
-  long     d1;
-  long     d2;
-  long     d3;
-  long     d4;
-  long     d5;
-  long     a0;
-  long     a1;
-  long     a2;
-  long     d0;
-  long     orig_d0;
-  long     stkadj;
-#ifdef CONFIG_COLDFIRE
-  unsigned format :  4; /* frame format specifier */
-  unsigned vector : 12; /* vector offset */
-  unsigned short sr;
-  unsigned long  pc;
-#else
-  unsigned short sr;
-  unsigned long  pc;
-  unsigned format :  4; /* frame format specifier */
-  unsigned vector : 12; /* vector offset */
-#endif
-};
-
-/*
- * This is the extended stack used by signal handlers and the context
- * switcher: it's pushed after the normal "struct pt_regs".
- */
-struct switch_stack {
-	unsigned long  d6;
-	unsigned long  d7;
-	unsigned long  a3;
-	unsigned long  a4;
-	unsigned long  a5;
-	unsigned long  a6;
-	unsigned long  retpc;
-};
-
-/* Arbitrarily choose the same ptrace numbers as used by the Sparc code. */
-#define PTRACE_GETREGS            12
-#define PTRACE_SETREGS            13
-#ifdef CONFIG_FPU
-#define PTRACE_GETFPREGS          14
-#define PTRACE_SETFPREGS          15
-#endif
-
-#ifdef __KERNEL__
-
-#ifndef PS_S
-#define PS_S  (0x2000)
-#define PS_M  (0x1000)
-#endif
-
-#define user_mode(regs) (!((regs)->sr & PS_S))
-#define instruction_pointer(regs) ((regs)->pc)
-#define profile_pc(regs) instruction_pointer(regs)
-extern void show_regs(struct pt_regs *);
-#endif /* __KERNEL__ */
-#endif /* __ASSEMBLY__ */
-#endif /* _M68K_PTRACE_H */
diff --git a/include/asm-m68knommu/thread_info.h b/include/asm-m68knommu/thread_info.h
deleted file mode 100644
index 95996d978bed..000000000000
--- a/include/asm-m68knommu/thread_info.h
+++ /dev/null
@@ -1,102 +0,0 @@
-/* thread_info.h: m68knommu low-level thread information
- * adapted from the i386 and PPC versions by Greg Ungerer (gerg@snapgear.com)
- *
- * Copyright (C) 2002  David Howells (dhowells@redhat.com)
- * - Incorporating suggestions made by Linus Torvalds and Dave Miller
- */
-
-#ifndef _ASM_THREAD_INFO_H
-#define _ASM_THREAD_INFO_H
-
-#include <asm/page.h>
-
-#ifdef __KERNEL__
-
-#ifndef __ASSEMBLY__
-
-/*
- * Size of kernel stack for each process. This must be a power of 2...
- */
-#ifdef CONFIG_4KSTACKS
-#define THREAD_SIZE_ORDER (0)
-#else
-#define THREAD_SIZE_ORDER (1)
-#endif
-                                                                                
-/*
- * for asm files, THREAD_SIZE is now generated by asm-offsets.c
- */
-#define THREAD_SIZE (PAGE_SIZE<<THREAD_SIZE_ORDER)
-
-/*
- * low level task data.
- */
-struct thread_info {
-	struct task_struct *task;		/* main task structure */
-	struct exec_domain *exec_domain;	/* execution domain */
-	unsigned long	   flags;		/* low level flags */
-	int		   cpu;			/* cpu we're on */
-	int		   preempt_count;	/* 0 => preemptable, <0 => BUG */
-	struct restart_block restart_block;
-};
-
-/*
- * macros/functions for gaining access to the thread information structure
- */
-#define INIT_THREAD_INFO(tsk)			\
-{						\
-	.task		= &tsk,			\
-	.exec_domain	= &default_exec_domain,	\
-	.flags		= 0,			\
-	.cpu		= 0,			\
-	.restart_block	= {			\
-		.fn = do_no_restart_syscall,	\
-	},					\
-}
-
-#define init_thread_info	(init_thread_union.thread_info)
-#define init_stack		(init_thread_union.stack)
-
-
-/* how to get the thread information struct from C */
-static inline struct thread_info *current_thread_info(void)
-{
-	struct thread_info *ti;
-	__asm__(
-		"move.l	%%sp, %0 \n\t"
-		"and.l	%1, %0"
-		: "=&d"(ti)
-		: "di" (~(THREAD_SIZE-1))
-		);
-	return ti;
-}
-
-/* thread information allocation */
-#define alloc_thread_info(tsk) ((struct thread_info *) \
-				__get_free_pages(GFP_KERNEL, THREAD_SIZE_ORDER))
-#define free_thread_info(ti)	free_pages((unsigned long) (ti), THREAD_SIZE_ORDER)
-#endif /* __ASSEMBLY__ */
-
-#define	PREEMPT_ACTIVE	0x4000000
-
-/*
- * thread information flag bit numbers
- */
-#define TIF_SYSCALL_TRACE	0	/* syscall trace active */
-#define TIF_SIGPENDING		1	/* signal pending */
-#define TIF_NEED_RESCHED	2	/* rescheduling necessary */
-#define TIF_POLLING_NRFLAG	3	/* true if poll_idle() is polling
-					   TIF_NEED_RESCHED */
-#define TIF_MEMDIE		4
-
-/* as above, but as bit values */
-#define _TIF_SYSCALL_TRACE	(1<<TIF_SYSCALL_TRACE)
-#define _TIF_SIGPENDING		(1<<TIF_SIGPENDING)
-#define _TIF_NEED_RESCHED	(1<<TIF_NEED_RESCHED)
-#define _TIF_POLLING_NRFLAG	(1<<TIF_POLLING_NRFLAG)
-
-#define _TIF_WORK_MASK		0x0000FFFE	/* work to do on interrupt/exception return */
-
-#endif /* __KERNEL__ */
-
-#endif /* _ASM_THREAD_INFO_H */
diff --git a/include/asm-m68knommu/unistd.h b/include/asm-m68knommu/unistd.h
deleted file mode 100644
index 4ba98b9c5d79..000000000000
--- a/include/asm-m68knommu/unistd.h
+++ /dev/null
@@ -1,366 +0,0 @@
-#ifndef _ASM_M68K_UNISTD_H_
-#define _ASM_M68K_UNISTD_H_
-
-/*
- * This file contains the system call numbers.
- */
-
-#define __NR_restart_syscall      0
-#define __NR_exit		  1
-#define __NR_fork		  2
-#define __NR_read		  3
-#define __NR_write		  4
-#define __NR_open		  5
-#define __NR_close		  6
-#define __NR_waitpid		  7
-#define __NR_creat		  8
-#define __NR_link		  9
-#define __NR_unlink		 10
-#define __NR_execve		 11
-#define __NR_chdir		 12
-#define __NR_time		 13
-#define __NR_mknod		 14
-#define __NR_chmod		 15
-#define __NR_chown		 16
-#define __NR_break		 17
-#define __NR_oldstat		 18
-#define __NR_lseek		 19
-#define __NR_getpid		 20
-#define __NR_mount		 21
-#define __NR_umount		 22
-#define __NR_setuid		 23
-#define __NR_getuid		 24
-#define __NR_stime		 25
-#define __NR_ptrace		 26
-#define __NR_alarm		 27
-#define __NR_oldfstat		 28
-#define __NR_pause		 29
-#define __NR_utime		 30
-#define __NR_stty		 31
-#define __NR_gtty		 32
-#define __NR_access		 33
-#define __NR_nice		 34
-#define __NR_ftime		 35
-#define __NR_sync		 36
-#define __NR_kill		 37
-#define __NR_rename		 38
-#define __NR_mkdir		 39
-#define __NR_rmdir		 40
-#define __NR_dup		 41
-#define __NR_pipe		 42
-#define __NR_times		 43
-#define __NR_prof		 44
-#define __NR_brk		 45
-#define __NR_setgid		 46
-#define __NR_getgid		 47
-#define __NR_signal		 48
-#define __NR_geteuid		 49
-#define __NR_getegid		 50
-#define __NR_acct		 51
-#define __NR_umount2		 52
-#define __NR_lock		 53
-#define __NR_ioctl		 54
-#define __NR_fcntl		 55
-#define __NR_mpx		 56
-#define __NR_setpgid		 57
-#define __NR_ulimit		 58
-#define __NR_oldolduname	 59
-#define __NR_umask		 60
-#define __NR_chroot		 61
-#define __NR_ustat		 62
-#define __NR_dup2		 63
-#define __NR_getppid		 64
-#define __NR_getpgrp		 65
-#define __NR_setsid		 66
-#define __NR_sigaction		 67
-#define __NR_sgetmask		 68
-#define __NR_ssetmask		 69
-#define __NR_setreuid		 70
-#define __NR_setregid		 71
-#define __NR_sigsuspend		 72
-#define __NR_sigpending		 73
-#define __NR_sethostname	 74
-#define __NR_setrlimit		 75
-#define __NR_getrlimit		 76
-#define __NR_getrusage		 77
-#define __NR_gettimeofday	 78
-#define __NR_settimeofday	 79
-#define __NR_getgroups		 80
-#define __NR_setgroups		 81
-#define __NR_select		 82
-#define __NR_symlink		 83
-#define __NR_oldlstat		 84
-#define __NR_readlink		 85
-#define __NR_uselib		 86
-#define __NR_swapon		 87
-#define __NR_reboot		 88
-#define __NR_readdir		 89
-#define __NR_mmap		 90
-#define __NR_munmap		 91
-#define __NR_truncate		 92
-#define __NR_ftruncate		 93
-#define __NR_fchmod		 94
-#define __NR_fchown		 95
-#define __NR_getpriority	 96
-#define __NR_setpriority	 97
-#define __NR_profil		 98
-#define __NR_statfs		 99
-#define __NR_fstatfs		100
-#define __NR_ioperm		101
-#define __NR_socketcall		102
-#define __NR_syslog		103
-#define __NR_setitimer		104
-#define __NR_getitimer		105
-#define __NR_stat		106
-#define __NR_lstat		107
-#define __NR_fstat		108
-#define __NR_olduname		109
-#define __NR_iopl		/* 110 */ not supported
-#define __NR_vhangup		111
-#define __NR_idle		/* 112 */ Obsolete
-#define __NR_vm86		/* 113 */ not supported
-#define __NR_wait4		114
-#define __NR_swapoff		115
-#define __NR_sysinfo		116
-#define __NR_ipc		117
-#define __NR_fsync		118
-#define __NR_sigreturn		119
-#define __NR_clone		120
-#define __NR_setdomainname	121
-#define __NR_uname		122
-#define __NR_cacheflush		123
-#define __NR_adjtimex		124
-#define __NR_mprotect		125
-#define __NR_sigprocmask	126
-#define __NR_create_module	127
-#define __NR_init_module	128
-#define __NR_delete_module	129
-#define __NR_get_kernel_syms	130
-#define __NR_quotactl		131
-#define __NR_getpgid		132
-#define __NR_fchdir		133
-#define __NR_bdflush		134
-#define __NR_sysfs		135
-#define __NR_personality	136
-#define __NR_afs_syscall	137 /* Syscall for Andrew File System */
-#define __NR_setfsuid		138
-#define __NR_setfsgid		139
-#define __NR__llseek		140
-#define __NR_getdents		141
-#define __NR__newselect		142
-#define __NR_flock		143
-#define __NR_msync		144
-#define __NR_readv		145
-#define __NR_writev		146
-#define __NR_getsid		147
-#define __NR_fdatasync		148
-#define __NR__sysctl		149
-#define __NR_mlock		150
-#define __NR_munlock		151
-#define __NR_mlockall		152
-#define __NR_munlockall		153
-#define __NR_sched_setparam		154
-#define __NR_sched_getparam		155
-#define __NR_sched_setscheduler		156
-#define __NR_sched_getscheduler		157
-#define __NR_sched_yield		158
-#define __NR_sched_get_priority_max	159
-#define __NR_sched_get_priority_min	160
-#define __NR_sched_rr_get_interval	161
-#define __NR_nanosleep		162
-#define __NR_mremap		163
-#define __NR_setresuid		164
-#define __NR_getresuid		165
-#define __NR_getpagesize	166
-#define __NR_query_module	167
-#define __NR_poll		168
-#define __NR_nfsservctl		169
-#define __NR_setresgid		170
-#define __NR_getresgid		171
-#define __NR_prctl		172
-#define __NR_rt_sigreturn	173
-#define __NR_rt_sigaction	174
-#define __NR_rt_sigprocmask	175
-#define __NR_rt_sigpending	176
-#define __NR_rt_sigtimedwait	177
-#define __NR_rt_sigqueueinfo	178
-#define __NR_rt_sigsuspend	179
-#define __NR_pread64		180
-#define __NR_pwrite64		181
-#define __NR_lchown		182
-#define __NR_getcwd		183
-#define __NR_capget		184
-#define __NR_capset		185
-#define __NR_sigaltstack	186
-#define __NR_sendfile		187
-#define __NR_getpmsg		188	/* some people actually want streams */
-#define __NR_putpmsg		189	/* some people actually want streams */
-#define __NR_vfork		190
-#define __NR_ugetrlimit		191
-#define __NR_mmap2		192
-#define __NR_truncate64		193
-#define __NR_ftruncate64	194
-#define __NR_stat64		195
-#define __NR_lstat64		196
-#define __NR_fstat64		197
-#define __NR_chown32		198
-#define __NR_getuid32		199
-#define __NR_getgid32		200
-#define __NR_geteuid32		201
-#define __NR_getegid32		202
-#define __NR_setreuid32		203
-#define __NR_setregid32		204
-#define __NR_getgroups32	205
-#define __NR_setgroups32	206
-#define __NR_fchown32		207
-#define __NR_setresuid32	208
-#define __NR_getresuid32	209
-#define __NR_setresgid32	210
-#define __NR_getresgid32	211
-#define __NR_lchown32		212
-#define __NR_setuid32		213
-#define __NR_setgid32		214
-#define __NR_setfsuid32		215
-#define __NR_setfsgid32		216
-#define __NR_pivot_root		217
-#define __NR_getdents64		220
-#define __NR_gettid		221
-#define __NR_tkill		222
-#define __NR_setxattr		223
-#define __NR_lsetxattr		224
-#define __NR_fsetxattr		225
-#define __NR_getxattr		226
-#define __NR_lgetxattr		227
-#define __NR_fgetxattr		228
-#define __NR_listxattr		229
-#define __NR_llistxattr		230
-#define __NR_flistxattr		231
-#define __NR_removexattr	232
-#define __NR_lremovexattr	233
-#define __NR_fremovexattr	234
-#define __NR_futex		235
-#define __NR_sendfile64		236
-#define __NR_mincore		237
-#define __NR_madvise		238
-#define __NR_fcntl64		239
-#define __NR_readahead		240
-#define __NR_io_setup		241
-#define __NR_io_destroy		242
-#define __NR_io_getevents	243
-#define __NR_io_submit		244
-#define __NR_io_cancel		245
-#define __NR_fadvise64		246
-#define __NR_exit_group		247
-#define __NR_lookup_dcookie	248
-#define __NR_epoll_create	249
-#define __NR_epoll_ctl		250
-#define __NR_epoll_wait		251
-#define __NR_remap_file_pages	252
-#define __NR_set_tid_address	253
-#define __NR_timer_create	254
-#define __NR_timer_settime	255
-#define __NR_timer_gettime	256
-#define __NR_timer_getoverrun	257
-#define __NR_timer_delete	258
-#define __NR_clock_settime	259
-#define __NR_clock_gettime	260
-#define __NR_clock_getres	261
-#define __NR_clock_nanosleep	262
-#define __NR_statfs64		263
-#define __NR_fstatfs64		264
-#define __NR_tgkill		265
-#define __NR_utimes		266
-#define __NR_fadvise64_64	267
-#define __NR_mbind		268
-#define __NR_get_mempolicy	269
-#define __NR_set_mempolicy	270
-#define __NR_mq_open		271
-#define __NR_mq_unlink		272
-#define __NR_mq_timedsend	273
-#define __NR_mq_timedreceive	274
-#define __NR_mq_notify		275
-#define __NR_mq_getsetattr	276
-#define __NR_waitid		277
-#define __NR_vserver		278
-#define __NR_add_key		279
-#define __NR_request_key	280
-#define __NR_keyctl		281
-#define __NR_ioprio_set		282
-#define __NR_ioprio_get		283
-#define __NR_inotify_init	284
-#define __NR_inotify_add_watch	285
-#define __NR_inotify_rm_watch	286
-#define __NR_migrate_pages	287
-#define __NR_openat		288
-#define __NR_mkdirat		289
-#define __NR_mknodat		290
-#define __NR_fchownat		291
-#define __NR_futimesat		292
-#define __NR_fstatat64		293
-#define __NR_unlinkat		294
-#define __NR_renameat		295
-#define __NR_linkat		296
-#define __NR_symlinkat		297
-#define __NR_readlinkat		298
-#define __NR_fchmodat		299
-#define __NR_faccessat		300
-#define __NR_pselect6		301
-#define __NR_ppoll		302
-#define __NR_unshare		303
-#define __NR_set_robust_list	304
-#define __NR_get_robust_list	305
-#define __NR_splice		306
-#define __NR_sync_file_range	307
-#define __NR_tee		308
-#define __NR_vmsplice		309
-#define __NR_move_pages		310
-#define __NR_sched_setaffinity	311
-#define __NR_sched_getaffinity	312
-#define __NR_kexec_load		313
-#define __NR_getcpu		314
-#define __NR_epoll_pwait	315
-#define __NR_utimensat		316
-#define __NR_signalfd		317
-#define __NR_timerfd_create	318
-#define __NR_eventfd		319
-#define __NR_fallocate		320
-#define __NR_timerfd_settime	321
-#define __NR_timerfd_gettime	322
-
-#ifdef __KERNEL__
-
-#define NR_syscalls		323
-
-#define __ARCH_WANT_IPC_PARSE_VERSION
-#define __ARCH_WANT_OLD_READDIR
-#define __ARCH_WANT_OLD_STAT
-#define __ARCH_WANT_STAT64
-#define __ARCH_WANT_SYS_ALARM
-#define __ARCH_WANT_SYS_GETHOSTNAME
-#define __ARCH_WANT_SYS_PAUSE
-#define __ARCH_WANT_SYS_SGETMASK
-#define __ARCH_WANT_SYS_SIGNAL
-#define __ARCH_WANT_SYS_TIME
-#define __ARCH_WANT_SYS_UTIME
-#define __ARCH_WANT_SYS_WAITPID
-#define __ARCH_WANT_SYS_SOCKETCALL
-#define __ARCH_WANT_SYS_FADVISE64
-#define __ARCH_WANT_SYS_GETPGRP
-#define __ARCH_WANT_SYS_LLSEEK
-#define __ARCH_WANT_SYS_NICE
-#define __ARCH_WANT_SYS_OLD_GETRLIMIT
-#define __ARCH_WANT_SYS_OLDUMOUNT
-#define __ARCH_WANT_SYS_SIGPENDING
-#define __ARCH_WANT_SYS_SIGPROCMASK
-#define __ARCH_WANT_SYS_RT_SIGACTION
-
-/*
- * "Conditional" syscalls
- *
- * What we want is __attribute__((weak,alias("sys_ni_syscall"))),
- * but it doesn't work on all toolchains, so we just do it by hand
- */
-#define cond_syscall(x) asm(".weak\t" #x "\n\t.set\t" #x ",sys_ni_syscall")
-
-#endif /* __KERNEL__ */
-#endif /* _ASM_M68K_UNISTD_H_ */
diff --git a/include/asm-mips/dma-mapping.h b/include/asm-mips/dma-mapping.h
index 230b3f1b69b1..c64afb40cd06 100644
--- a/include/asm-mips/dma-mapping.h
+++ b/include/asm-mips/dma-mapping.h
@@ -42,7 +42,7 @@ extern void dma_sync_sg_for_cpu(struct device *dev, struct scatterlist *sg,
 	int nelems, enum dma_data_direction direction);
 extern void dma_sync_sg_for_device(struct device *dev, struct scatterlist *sg,
 	int nelems, enum dma_data_direction direction);
-extern int dma_mapping_error(dma_addr_t dma_addr);
+extern int dma_mapping_error(struct device *dev, dma_addr_t dma_addr);
 extern int dma_supported(struct device *dev, u64 mask);
 
 static inline int
diff --git a/include/asm-mips/gdb-stub.h b/include/asm-mips/gdb-stub.h
deleted file mode 100644
index 22f67d4a71ab..000000000000
--- a/include/asm-mips/gdb-stub.h
+++ /dev/null
@@ -1,215 +0,0 @@
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 1995 Andreas Busse
- * Copyright (C) 2003 Ralf Baechle
- */
-#ifndef _ASM_GDB_STUB_H
-#define _ASM_GDB_STUB_H
-
-
-/*
- * important register numbers
- */
-
-#define REG_EPC			37
-#define REG_FP			72
-#define REG_SP			29
-
-/*
- * Stack layout for the GDB exception handler
- * Derived from the stack layout described in asm-mips/stackframe.h
- *
- * The first PTRSIZE*6 bytes are argument save space for C subroutines.
- */
-#define NUMREGS			90
-
-#define GDB_FR_REG0		(PTRSIZE*6)			/* 0 */
-#define GDB_FR_REG1		((GDB_FR_REG0) + LONGSIZE)	/* 1 */
-#define GDB_FR_REG2		((GDB_FR_REG1) + LONGSIZE)	/* 2 */
-#define GDB_FR_REG3		((GDB_FR_REG2) + LONGSIZE)	/* 3 */
-#define GDB_FR_REG4		((GDB_FR_REG3) + LONGSIZE)	/* 4 */
-#define GDB_FR_REG5		((GDB_FR_REG4) + LONGSIZE)	/* 5 */
-#define GDB_FR_REG6		((GDB_FR_REG5) + LONGSIZE)	/* 6 */
-#define GDB_FR_REG7		((GDB_FR_REG6) + LONGSIZE)	/* 7 */
-#define GDB_FR_REG8		((GDB_FR_REG7) + LONGSIZE)	/* 8 */
-#define GDB_FR_REG9	        ((GDB_FR_REG8) + LONGSIZE)	/* 9 */
-#define GDB_FR_REG10		((GDB_FR_REG9) + LONGSIZE)	/* 10 */
-#define GDB_FR_REG11		((GDB_FR_REG10) + LONGSIZE)	/* 11 */
-#define GDB_FR_REG12		((GDB_FR_REG11) + LONGSIZE)	/* 12 */
-#define GDB_FR_REG13		((GDB_FR_REG12) + LONGSIZE)	/* 13 */
-#define GDB_FR_REG14		((GDB_FR_REG13) + LONGSIZE)	/* 14 */
-#define GDB_FR_REG15		((GDB_FR_REG14) + LONGSIZE)	/* 15 */
-#define GDB_FR_REG16		((GDB_FR_REG15) + LONGSIZE)	/* 16 */
-#define GDB_FR_REG17		((GDB_FR_REG16) + LONGSIZE)	/* 17 */
-#define GDB_FR_REG18		((GDB_FR_REG17) + LONGSIZE)	/* 18 */
-#define GDB_FR_REG19		((GDB_FR_REG18) + LONGSIZE)	/* 19 */
-#define GDB_FR_REG20		((GDB_FR_REG19) + LONGSIZE)	/* 20 */
-#define GDB_FR_REG21		((GDB_FR_REG20) + LONGSIZE)	/* 21 */
-#define GDB_FR_REG22		((GDB_FR_REG21) + LONGSIZE)	/* 22 */
-#define GDB_FR_REG23		((GDB_FR_REG22) + LONGSIZE)	/* 23 */
-#define GDB_FR_REG24		((GDB_FR_REG23) + LONGSIZE)	/* 24 */
-#define GDB_FR_REG25		((GDB_FR_REG24) + LONGSIZE)	/* 25 */
-#define GDB_FR_REG26		((GDB_FR_REG25) + LONGSIZE)	/* 26 */
-#define GDB_FR_REG27		((GDB_FR_REG26) + LONGSIZE)	/* 27 */
-#define GDB_FR_REG28		((GDB_FR_REG27) + LONGSIZE)	/* 28 */
-#define GDB_FR_REG29		((GDB_FR_REG28) + LONGSIZE)	/* 29 */
-#define GDB_FR_REG30		((GDB_FR_REG29) + LONGSIZE)	/* 30 */
-#define GDB_FR_REG31		((GDB_FR_REG30) + LONGSIZE)	/* 31 */
-
-/*
- * Saved special registers
- */
-#define GDB_FR_STATUS		((GDB_FR_REG31) + LONGSIZE)	/* 32 */
-#define GDB_FR_LO		((GDB_FR_STATUS) + LONGSIZE)	/* 33 */
-#define GDB_FR_HI		((GDB_FR_LO) + LONGSIZE)	/* 34 */
-#define GDB_FR_BADVADDR		((GDB_FR_HI) + LONGSIZE)	/* 35 */
-#define GDB_FR_CAUSE		((GDB_FR_BADVADDR) + LONGSIZE)	/* 36 */
-#define GDB_FR_EPC		((GDB_FR_CAUSE) + LONGSIZE)	/* 37 */
-
-/*
- * Saved floating point registers
- */
-#define GDB_FR_FPR0		((GDB_FR_EPC) + LONGSIZE)	/* 38 */
-#define GDB_FR_FPR1		((GDB_FR_FPR0) + LONGSIZE)	/* 39 */
-#define GDB_FR_FPR2		((GDB_FR_FPR1) + LONGSIZE)	/* 40 */
-#define GDB_FR_FPR3		((GDB_FR_FPR2) + LONGSIZE)	/* 41 */
-#define GDB_FR_FPR4		((GDB_FR_FPR3) + LONGSIZE)	/* 42 */
-#define GDB_FR_FPR5		((GDB_FR_FPR4) + LONGSIZE)	/* 43 */
-#define GDB_FR_FPR6		((GDB_FR_FPR5) + LONGSIZE)	/* 44 */
-#define GDB_FR_FPR7		((GDB_FR_FPR6) + LONGSIZE)	/* 45 */
-#define GDB_FR_FPR8		((GDB_FR_FPR7) + LONGSIZE)	/* 46 */
-#define GDB_FR_FPR9		((GDB_FR_FPR8) + LONGSIZE)	/* 47 */
-#define GDB_FR_FPR10		((GDB_FR_FPR9) + LONGSIZE)	/* 48 */
-#define GDB_FR_FPR11		((GDB_FR_FPR10) + LONGSIZE)	/* 49 */
-#define GDB_FR_FPR12		((GDB_FR_FPR11) + LONGSIZE)	/* 50 */
-#define GDB_FR_FPR13		((GDB_FR_FPR12) + LONGSIZE)	/* 51 */
-#define GDB_FR_FPR14		((GDB_FR_FPR13) + LONGSIZE)	/* 52 */
-#define GDB_FR_FPR15		((GDB_FR_FPR14) + LONGSIZE)	/* 53 */
-#define GDB_FR_FPR16		((GDB_FR_FPR15) + LONGSIZE)	/* 54 */
-#define GDB_FR_FPR17		((GDB_FR_FPR16) + LONGSIZE)	/* 55 */
-#define GDB_FR_FPR18		((GDB_FR_FPR17) + LONGSIZE)	/* 56 */
-#define GDB_FR_FPR19		((GDB_FR_FPR18) + LONGSIZE)	/* 57 */
-#define GDB_FR_FPR20		((GDB_FR_FPR19) + LONGSIZE)	/* 58 */
-#define GDB_FR_FPR21		((GDB_FR_FPR20) + LONGSIZE)	/* 59 */
-#define GDB_FR_FPR22		((GDB_FR_FPR21) + LONGSIZE)	/* 60 */
-#define GDB_FR_FPR23		((GDB_FR_FPR22) + LONGSIZE)	/* 61 */
-#define GDB_FR_FPR24		((GDB_FR_FPR23) + LONGSIZE)	/* 62 */
-#define GDB_FR_FPR25		((GDB_FR_FPR24) + LONGSIZE)	/* 63 */
-#define GDB_FR_FPR26		((GDB_FR_FPR25) + LONGSIZE)	/* 64 */
-#define GDB_FR_FPR27		((GDB_FR_FPR26) + LONGSIZE)	/* 65 */
-#define GDB_FR_FPR28		((GDB_FR_FPR27) + LONGSIZE)	/* 66 */
-#define GDB_FR_FPR29		((GDB_FR_FPR28) + LONGSIZE)	/* 67 */
-#define GDB_FR_FPR30		((GDB_FR_FPR29) + LONGSIZE)	/* 68 */
-#define GDB_FR_FPR31		((GDB_FR_FPR30) + LONGSIZE)	/* 69 */
-
-#define GDB_FR_FSR		((GDB_FR_FPR31) + LONGSIZE)	/* 70 */
-#define GDB_FR_FIR		((GDB_FR_FSR) + LONGSIZE)	/* 71 */
-#define GDB_FR_FRP		((GDB_FR_FIR) + LONGSIZE)	/* 72 */
-
-#define GDB_FR_DUMMY		((GDB_FR_FRP) + LONGSIZE)	/* 73, unused ??? */
-
-/*
- * Again, CP0 registers
- */
-#define GDB_FR_CP0_INDEX	((GDB_FR_DUMMY) + LONGSIZE)	/* 74 */
-#define GDB_FR_CP0_RANDOM	((GDB_FR_CP0_INDEX) + LONGSIZE)	/* 75 */
-#define GDB_FR_CP0_ENTRYLO0	((GDB_FR_CP0_RANDOM) + LONGSIZE)/* 76 */
-#define GDB_FR_CP0_ENTRYLO1	((GDB_FR_CP0_ENTRYLO0) + LONGSIZE)/* 77 */
-#define GDB_FR_CP0_CONTEXT	((GDB_FR_CP0_ENTRYLO1) + LONGSIZE)/* 78 */
-#define GDB_FR_CP0_PAGEMASK	((GDB_FR_CP0_CONTEXT) + LONGSIZE)/* 79 */
-#define GDB_FR_CP0_WIRED	((GDB_FR_CP0_PAGEMASK) + LONGSIZE)/* 80 */
-#define GDB_FR_CP0_REG7		((GDB_FR_CP0_WIRED) + LONGSIZE)	/* 81 */
-#define GDB_FR_CP0_REG8		((GDB_FR_CP0_REG7) + LONGSIZE)	/* 82 */
-#define GDB_FR_CP0_REG9		((GDB_FR_CP0_REG8) + LONGSIZE)	/* 83 */
-#define GDB_FR_CP0_ENTRYHI	((GDB_FR_CP0_REG9) + LONGSIZE)	/* 84 */
-#define GDB_FR_CP0_REG11	((GDB_FR_CP0_ENTRYHI) + LONGSIZE)/* 85 */
-#define GDB_FR_CP0_REG12	((GDB_FR_CP0_REG11) + LONGSIZE)	/* 86 */
-#define GDB_FR_CP0_REG13	((GDB_FR_CP0_REG12) + LONGSIZE)	/* 87 */
-#define GDB_FR_CP0_REG14	((GDB_FR_CP0_REG13) + LONGSIZE)	/* 88 */
-#define GDB_FR_CP0_PRID		((GDB_FR_CP0_REG14) + LONGSIZE)	/* 89 */
-
-#define GDB_FR_SIZE		((((GDB_FR_CP0_PRID) + LONGSIZE) + (PTRSIZE-1)) & ~(PTRSIZE-1))
-
-#ifndef __ASSEMBLY__
-
-/*
- * This is the same as above, but for the high-level
- * part of the GDB stub.
- */
-
-struct gdb_regs {
-	/*
-	 * Pad bytes for argument save space on the stack
-	 * 24/48 Bytes for 32/64 bit code
-	 */
-	unsigned long pad0[6];
-
-	/*
-	 * saved main processor registers
-	 */
-	long	 reg0,  reg1,  reg2,  reg3,  reg4,  reg5,  reg6,  reg7;
-	long	 reg8,  reg9, reg10, reg11, reg12, reg13, reg14, reg15;
-	long	reg16, reg17, reg18, reg19, reg20, reg21, reg22, reg23;
-	long	reg24, reg25, reg26, reg27, reg28, reg29, reg30, reg31;
-
-	/*
-	 * Saved special registers
-	 */
-	long	cp0_status;
-	long	lo;
-	long	hi;
-	long	cp0_badvaddr;
-	long	cp0_cause;
-	long	cp0_epc;
-
-	/*
-	 * Saved floating point registers
-	 */
-	long	fpr0,  fpr1,  fpr2,  fpr3,  fpr4,  fpr5,  fpr6,  fpr7;
-	long	fpr8,  fpr9,  fpr10, fpr11, fpr12, fpr13, fpr14, fpr15;
-	long	fpr16, fpr17, fpr18, fpr19, fpr20, fpr21, fpr22, fpr23;
-	long	fpr24, fpr25, fpr26, fpr27, fpr28, fpr29, fpr30, fpr31;
-
-	long	cp1_fsr;
-	long	cp1_fir;
-
-	/*
-	 * Frame pointer
-	 */
-	long	frame_ptr;
-	long    dummy;		/* unused */
-
-	/*
-	 * saved cp0 registers
-	 */
-	long	cp0_index;
-	long	cp0_random;
-	long	cp0_entrylo0;
-	long	cp0_entrylo1;
-	long	cp0_context;
-	long	cp0_pagemask;
-	long	cp0_wired;
-	long	cp0_reg7;
-	long	cp0_reg8;
-	long	cp0_reg9;
-	long	cp0_entryhi;
-	long	cp0_reg11;
-	long	cp0_reg12;
-	long	cp0_reg13;
-	long	cp0_reg14;
-	long	cp0_prid;
-};
-
-/*
- * Prototypes
- */
-
-extern int kgdb_enabled;
-void set_debug_traps(void);
-void set_async_breakpoint(unsigned long *epc);
-
-#endif /* !__ASSEMBLY__ */
-#endif /* _ASM_GDB_STUB_H */
diff --git a/include/asm-mips/kdebug.h b/include/asm-mips/kdebug.h
index 6ece1b037665..5bf62aafc890 100644
--- a/include/asm-mips/kdebug.h
+++ b/include/asm-mips/kdebug.h
@@ -1 +1,13 @@
-#include <asm-generic/kdebug.h>
+#ifndef _ASM_MIPS_KDEBUG_H
+#define _ASM_MIPS_KDEBUG_H
+
+#include <linux/notifier.h>
+
+enum die_val {
+	DIE_OOPS = 1,
+	DIE_FP,
+	DIE_TRAP,
+	DIE_RI,
+};
+
+#endif /* _ASM_MIPS_KDEBUG_H */
diff --git a/include/asm-mips/kexec.h b/include/asm-mips/kexec.h
index cdbab43b7d3a..4314892aaebb 100644
--- a/include/asm-mips/kexec.h
+++ b/include/asm-mips/kexec.h
@@ -16,7 +16,7 @@
  /* Maximum address we can use for the control code buffer */
 #define KEXEC_CONTROL_MEMORY_LIMIT (0x20000000)
 
-#define KEXEC_CONTROL_CODE_SIZE 4096
+#define KEXEC_CONTROL_PAGE_SIZE 4096
 
 /* The native architecture */
 #define KEXEC_ARCH KEXEC_ARCH_MIPS
diff --git a/include/asm-mips/kgdb.h b/include/asm-mips/kgdb.h
new file mode 100644
index 000000000000..48223b09396c
--- /dev/null
+++ b/include/asm-mips/kgdb.h
@@ -0,0 +1,44 @@
+#ifndef __ASM_KGDB_H_
+#define __ASM_KGDB_H_
+
+#ifdef __KERNEL__
+
+#include <asm/sgidefs.h>
+
+#if (_MIPS_ISA == _MIPS_ISA_MIPS1) || (_MIPS_ISA == _MIPS_ISA_MIPS2) || \
+	(_MIPS_ISA == _MIPS_ISA_MIPS32)
+
+#define KGDB_GDB_REG_SIZE 32
+
+#elif (_MIPS_ISA == _MIPS_ISA_MIPS3) || (_MIPS_ISA == _MIPS_ISA_MIPS4) || \
+	(_MIPS_ISA == _MIPS_ISA_MIPS64)
+
+#ifdef CONFIG_32BIT
+#define KGDB_GDB_REG_SIZE 32
+#else /* CONFIG_CPU_32BIT */
+#define KGDB_GDB_REG_SIZE 64
+#endif
+#else
+#error "Need to set KGDB_GDB_REG_SIZE for MIPS ISA"
+#endif /* _MIPS_ISA */
+
+#define BUFMAX			2048
+#if (KGDB_GDB_REG_SIZE == 32)
+#define NUMREGBYTES		(90*sizeof(u32))
+#define NUMCRITREGBYTES		(12*sizeof(u32))
+#else
+#define NUMREGBYTES		(90*sizeof(u64))
+#define NUMCRITREGBYTES		(12*sizeof(u64))
+#endif
+#define BREAK_INSTR_SIZE	4
+#define CACHE_FLUSH_IS_SAFE	0
+
+extern void arch_kgdb_breakpoint(void);
+extern int kgdb_early_setup;
+extern void *saved_vectors[32];
+extern void handle_exception(struct pt_regs *regs);
+extern void breakinst(void);
+
+#endif				/* __KERNEL__ */
+
+#endif /* __ASM_KGDB_H_ */
diff --git a/include/asm-mips/kvm.h b/include/asm-mips/kvm.h
deleted file mode 100644
index 093a5b7f796b..000000000000
--- a/include/asm-mips/kvm.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef __LINUX_KVM_MIPS_H
-#define __LINUX_KVM_MIPS_H
-
-/* mips does not support KVM */
-
-#endif
diff --git a/include/asm-mips/mach-generic/gpio.h b/include/asm-mips/mach-generic/gpio.h
index e6b376bd9d06..b4e70208da64 100644
--- a/include/asm-mips/mach-generic/gpio.h
+++ b/include/asm-mips/mach-generic/gpio.h
@@ -1,7 +1,7 @@
 #ifndef __ASM_MACH_GENERIC_GPIO_H
 #define __ASM_MACH_GENERIC_GPIO_H
 
-#ifdef CONFIG_HAVE_GPIO_LIB
+#ifdef CONFIG_GPIOLIB
 #define gpio_get_value	__gpio_get_value
 #define gpio_set_value	__gpio_set_value
 #define gpio_cansleep	__gpio_cansleep
diff --git a/include/asm-mips/namei.h b/include/asm-mips/namei.h
deleted file mode 100644
index a6605a752469..000000000000
--- a/include/asm-mips/namei.h
+++ /dev/null
@@ -1,11 +0,0 @@
-#ifndef _ASM_NAMEI_H
-#define _ASM_NAMEI_H
-
-/*
- * This dummy routine maybe changed to something useful
- * for /usr/gnemul/ emulation stuff.
- */
-
-#define __emul_prefix() NULL
-
-#endif /* _ASM_NAMEI_H */
diff --git a/include/asm-mips/pci.h b/include/asm-mips/pci.h
index c205875d7f31..5510c53b7feb 100644
--- a/include/asm-mips/pci.h
+++ b/include/asm-mips/pci.h
@@ -174,4 +174,6 @@ static inline int pci_get_legacy_ide_irq(struct pci_dev *dev, int channel)
 
 extern int pci_probe_only;
 
+extern char * (*pcibios_plat_setup)(char *str);
+
 #endif /* _ASM_PCI_H */
diff --git a/include/asm-mips/thread_info.h b/include/asm-mips/thread_info.h
index b2772df1a1bd..bb3060699df2 100644
--- a/include/asm-mips/thread_info.h
+++ b/include/asm-mips/thread_info.h
@@ -82,6 +82,8 @@ register struct thread_info *__current_thread_info __asm__("$28");
 #define THREAD_SIZE (PAGE_SIZE << THREAD_SIZE_ORDER)
 #define THREAD_MASK (THREAD_SIZE - 1UL)
 
+#define __HAVE_ARCH_THREAD_INFO_ALLOCATOR
+
 #ifdef CONFIG_DEBUG_STACK_USAGE
 #define alloc_thread_info(tsk)					\
 ({								\
diff --git a/include/asm-mips/txx9/generic.h b/include/asm-mips/txx9/generic.h
index cbae37ec3d88..5b1ccf901c62 100644
--- a/include/asm-mips/txx9/generic.h
+++ b/include/asm-mips/txx9/generic.h
@@ -44,5 +44,19 @@ extern struct txx9_board_vec *txx9_board_vec;
 extern int (*txx9_irq_dispatch)(int pending);
 void prom_init_cmdline(void);
 char *prom_getcmdline(void);
+void txx9_wdt_init(unsigned long base);
+void txx9_spi_init(int busid, unsigned long base, int irq);
+void txx9_ethaddr_init(unsigned int id, unsigned char *ethaddr);
+void txx9_sio_init(unsigned long baseaddr, int irq,
+		   unsigned int line, unsigned int sclk, int nocts);
+void prom_putchar(char c);
+#ifdef CONFIG_EARLY_PRINTK
+extern void (*txx9_prom_putchar)(char c);
+void txx9_sio_putchar_init(unsigned long baseaddr);
+#else
+static inline void txx9_sio_putchar_init(unsigned long baseaddr)
+{
+}
+#endif
 
 #endif /* __ASM_TXX9_GENERIC_H */
diff --git a/include/asm-mips/txx9/jmr3927.h b/include/asm-mips/txx9/jmr3927.h
index d6eb1b6a54eb..a409c446bf18 100644
--- a/include/asm-mips/txx9/jmr3927.h
+++ b/include/asm-mips/txx9/jmr3927.h
@@ -149,8 +149,6 @@
 
 /* Clocks */
 #define JMR3927_CORECLK	132710400	/* 132.7MHz */
-#define JMR3927_GBUSCLK	(JMR3927_CORECLK / 2)	/* 66.35MHz */
-#define JMR3927_IMCLK	(JMR3927_CORECLK / 4)	/* 33.17MHz */
 
 /*
  * TX3927 Pin Configuration:
diff --git a/include/asm-mips/txx9/pci.h b/include/asm-mips/txx9/pci.h
index d89a45091e24..3d32529060aa 100644
--- a/include/asm-mips/txx9/pci.h
+++ b/include/asm-mips/txx9/pci.h
@@ -33,4 +33,7 @@ enum txx9_pci_err_action {
 };
 extern enum txx9_pci_err_action txx9_pci_err_action;
 
+extern char * (*txx9_board_pcibios_setup)(char *str);
+char *txx9_pcibios_setup(char *str);
+
 #endif /* __ASM_TXX9_PCI_H */
diff --git a/include/asm-mips/txx9/smsc_fdc37m81x.h b/include/asm-mips/txx9/smsc_fdc37m81x.h
index 9375e4fc2289..02e161d0755d 100644
--- a/include/asm-mips/txx9/smsc_fdc37m81x.h
+++ b/include/asm-mips/txx9/smsc_fdc37m81x.h
@@ -56,7 +56,7 @@
 #define SMSC_FDC37M81X_CONFIG_EXIT   0xaa
 #define SMSC_FDC37M81X_CHIP_ID       0x4d
 
-unsigned long __init smsc_fdc37m81x_init(unsigned long port);
+unsigned long smsc_fdc37m81x_init(unsigned long port);
 
 void smsc_fdc37m81x_config_beg(void);
 
diff --git a/include/asm-mips/txx9/tx3927.h b/include/asm-mips/txx9/tx3927.h
index ea79e1b16e71..587deb9592d2 100644
--- a/include/asm-mips/txx9/tx3927.h
+++ b/include/asm-mips/txx9/tx3927.h
@@ -8,9 +8,8 @@
 #ifndef __ASM_TXX9_TX3927_H
 #define __ASM_TXX9_TX3927_H
 
-#include <asm/txx9/txx927.h>
-
 #define TX3927_REG_BASE	0xfffe0000UL
+#define TX3927_REG_SIZE	0x00010000
 #define TX3927_SDRAMC_REG	(TX3927_REG_BASE + 0x8000)
 #define TX3927_ROMC_REG		(TX3927_REG_BASE + 0x9000)
 #define TX3927_DMA_REG		(TX3927_REG_BASE + 0xb000)
@@ -236,11 +235,17 @@ struct tx3927_ccfg_reg {
 /* see PCI_STATUS_XXX in linux/pci.h */
 #define PCI_STATUS_NEW_CAP	0x0010
 
+/* bits for ISTAT/IIM */
+#define TX3927_PCIC_IIM_ALL	0x00001600
+
 /* bits for TC */
 #define TX3927_PCIC_TC_OF16E	0x00000020
 #define TX3927_PCIC_TC_IF8E	0x00000010
 #define TX3927_PCIC_TC_OF8E	0x00000008
 
+/* bits for TSTAT/TIM */
+#define TX3927_PCIC_TIM_ALL	0x0003ffff
+
 /* bits for IOBA/MBA */
 /* see PCI_BASE_ADDRESS_XXX in linux/pci.h */
 
@@ -313,12 +318,22 @@ struct tx3927_ccfg_reg {
 #define tx3927_dmaptr		((struct tx3927_dma_reg *)TX3927_DMA_REG)
 #define tx3927_pcicptr		((struct tx3927_pcic_reg *)TX3927_PCIC_REG)
 #define tx3927_ccfgptr		((struct tx3927_ccfg_reg *)TX3927_CCFG_REG)
-#define tx3927_tmrptr(ch)	((struct txx927_tmr_reg *)TX3927_TMR_REG(ch))
 #define tx3927_sioptr(ch)	((struct txx927_sio_reg *)TX3927_SIO_REG(ch))
 #define tx3927_pioptr		((struct txx9_pio_reg __iomem *)TX3927_PIO_REG)
 
+#define TX3927_REV_PCODE()	(tx3927_ccfgptr->crir >> 16)
+#define TX3927_ROMC_BA(ch)	(tx3927_romcptr->cr[(ch)] & 0xfff00000)
+#define TX3927_ROMC_SIZE(ch)	\
+	(0x00100000 << ((tx3927_romcptr->cr[(ch)] >> 8) & 0xf))
+
+void tx3927_wdt_init(void);
+void tx3927_setup(void);
+void tx3927_time_init(unsigned int evt_tmrnr, unsigned int src_tmrnr);
+void tx3927_sio_init(unsigned int sclk, unsigned int cts_mask);
 struct pci_controller;
-void __init tx3927_pcic_setup(struct pci_controller *channel,
-			      unsigned long sdram_size, int extarb);
+void tx3927_pcic_setup(struct pci_controller *channel,
+		       unsigned long sdram_size, int extarb);
+void tx3927_setup_pcierr_irq(void);
+void tx3927_irq_init(void);
 
 #endif /* __ASM_TXX9_TX3927_H */
diff --git a/include/asm-mips/txx9/tx4927.h b/include/asm-mips/txx9/tx4927.h
index ceb4b79ff4e3..195f6515db9a 100644
--- a/include/asm-mips/txx9/tx4927.h
+++ b/include/asm-mips/txx9/tx4927.h
@@ -243,12 +243,13 @@ static inline void tx4927_ccfg_change(__u64 change, __u64 new)
 }
 
 unsigned int tx4927_get_mem_size(void);
-void tx4927_wdr_init(void);
+void tx4927_wdt_init(void);
 void tx4927_setup(void);
 void tx4927_time_init(unsigned int tmrnr);
-void tx4927_setup_serial(void);
+void tx4927_sio_init(unsigned int sclk, unsigned int cts_mask);
 int tx4927_report_pciclk(void);
 int tx4927_pciclk66_setup(void);
+void tx4927_setup_pcierr_irq(void);
 void tx4927_irq_init(void);
 
 #endif /* __ASM_TXX9_TX4927_H */
diff --git a/include/asm-mips/txx9/tx4927pcic.h b/include/asm-mips/txx9/tx4927pcic.h
index d61c3d09c4a2..c470b8a5fe57 100644
--- a/include/asm-mips/txx9/tx4927pcic.h
+++ b/include/asm-mips/txx9/tx4927pcic.h
@@ -10,6 +10,7 @@
 #define __ASM_TXX9_TX4927PCIC_H
 
 #include <linux/pci.h>
+#include <linux/irqreturn.h>
 
 struct tx4927_pcic_reg {
 	u32 pciid;
@@ -192,8 +193,11 @@ struct tx4927_pcic_reg {
 
 struct tx4927_pcic_reg __iomem *get_tx4927_pcicptr(
 	struct pci_controller *channel);
-void __init tx4927_pcic_setup(struct tx4927_pcic_reg __iomem *pcicptr,
-			      struct pci_controller *channel, int extarb);
+void tx4927_pcic_setup(struct tx4927_pcic_reg __iomem *pcicptr,
+		       struct pci_controller *channel, int extarb);
 void tx4927_report_pcic_status(void);
+char *tx4927_pcibios_setup(char *str);
+void tx4927_dump_pcic_settings(void);
+irqreturn_t tx4927_pcierr_interrupt(int irq, void *dev_id);
 
 #endif /* __ASM_TXX9_TX4927PCIC_H */
diff --git a/include/asm-mips/txx9/tx4938.h b/include/asm-mips/txx9/tx4938.h
index 1ed969d381d6..8175d4ccbc39 100644
--- a/include/asm-mips/txx9/tx4938.h
+++ b/include/asm-mips/txx9/tx4938.h
@@ -276,15 +276,18 @@ struct tx4938_ccfg_reg {
 #define TX4938_EBUSC_SIZE(ch)	TX4927_EBUSC_SIZE(ch)
 
 #define tx4938_get_mem_size() tx4927_get_mem_size()
-void tx4938_wdr_init(void);
+void tx4938_wdt_init(void);
 void tx4938_setup(void);
 void tx4938_time_init(unsigned int tmrnr);
-void tx4938_setup_serial(void);
+void tx4938_sio_init(unsigned int sclk, unsigned int cts_mask);
+void tx4938_spi_init(int busid);
+void tx4938_ethaddr_init(unsigned char *addr0, unsigned char *addr1);
 int tx4938_report_pciclk(void);
 void tx4938_report_pci1clk(void);
 int tx4938_pciclk66_setup(void);
 struct pci_dev;
 int tx4938_pcic1_map_irq(const struct pci_dev *dev, u8 slot);
+void tx4938_setup_pcierr_irq(void);
 void tx4938_irq_init(void);
 
 #endif
diff --git a/include/asm-mips/txx9/txx927.h b/include/asm-mips/txx9/txx927.h
deleted file mode 100644
index 97dd7ad1a890..000000000000
--- a/include/asm-mips/txx9/txx927.h
+++ /dev/null
@@ -1,121 +0,0 @@
-/*
- * Common definitions for TX3927/TX4927
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 2000 Toshiba Corporation
- */
-#ifndef __ASM_TXX9_TXX927_H
-#define __ASM_TXX9_TXX927_H
-
-struct txx927_sio_reg {
-	volatile unsigned long lcr;
-	volatile unsigned long dicr;
-	volatile unsigned long disr;
-	volatile unsigned long cisr;
-	volatile unsigned long fcr;
-	volatile unsigned long flcr;
-	volatile unsigned long bgr;
-	volatile unsigned long tfifo;
-	volatile unsigned long rfifo;
-};
-
-/*
- * SIO
- */
-/* SILCR : Line Control */
-#define TXx927_SILCR_SCS_MASK	0x00000060
-#define TXx927_SILCR_SCS_IMCLK	0x00000000
-#define TXx927_SILCR_SCS_IMCLK_BG	0x00000020
-#define TXx927_SILCR_SCS_SCLK	0x00000040
-#define TXx927_SILCR_SCS_SCLK_BG	0x00000060
-#define TXx927_SILCR_UEPS	0x00000010
-#define TXx927_SILCR_UPEN	0x00000008
-#define TXx927_SILCR_USBL_MASK	0x00000004
-#define TXx927_SILCR_USBL_1BIT	0x00000004
-#define TXx927_SILCR_USBL_2BIT	0x00000000
-#define TXx927_SILCR_UMODE_MASK	0x00000003
-#define TXx927_SILCR_UMODE_8BIT	0x00000000
-#define TXx927_SILCR_UMODE_7BIT	0x00000001
-
-/* SIDICR : DMA/Int. Control */
-#define TXx927_SIDICR_TDE	0x00008000
-#define TXx927_SIDICR_RDE	0x00004000
-#define TXx927_SIDICR_TIE	0x00002000
-#define TXx927_SIDICR_RIE	0x00001000
-#define TXx927_SIDICR_SPIE	0x00000800
-#define TXx927_SIDICR_CTSAC	0x00000600
-#define TXx927_SIDICR_STIE_MASK	0x0000003f
-#define TXx927_SIDICR_STIE_OERS		0x00000020
-#define TXx927_SIDICR_STIE_CTSS		0x00000010
-#define TXx927_SIDICR_STIE_RBRKD	0x00000008
-#define TXx927_SIDICR_STIE_TRDY		0x00000004
-#define TXx927_SIDICR_STIE_TXALS	0x00000002
-#define TXx927_SIDICR_STIE_UBRKD	0x00000001
-
-/* SIDISR : DMA/Int. Status */
-#define TXx927_SIDISR_UBRK	0x00008000
-#define TXx927_SIDISR_UVALID	0x00004000
-#define TXx927_SIDISR_UFER	0x00002000
-#define TXx927_SIDISR_UPER	0x00001000
-#define TXx927_SIDISR_UOER	0x00000800
-#define TXx927_SIDISR_ERI	0x00000400
-#define TXx927_SIDISR_TOUT	0x00000200
-#define TXx927_SIDISR_TDIS	0x00000100
-#define TXx927_SIDISR_RDIS	0x00000080
-#define TXx927_SIDISR_STIS	0x00000040
-#define TXx927_SIDISR_RFDN_MASK	0x0000001f
-
-/* SICISR : Change Int. Status */
-#define TXx927_SICISR_OERS	0x00000020
-#define TXx927_SICISR_CTSS	0x00000010
-#define TXx927_SICISR_RBRKD	0x00000008
-#define TXx927_SICISR_TRDY	0x00000004
-#define TXx927_SICISR_TXALS	0x00000002
-#define TXx927_SICISR_UBRKD	0x00000001
-
-/* SIFCR : FIFO Control */
-#define TXx927_SIFCR_SWRST	0x00008000
-#define TXx927_SIFCR_RDIL_MASK	0x00000180
-#define TXx927_SIFCR_RDIL_1	0x00000000
-#define TXx927_SIFCR_RDIL_4	0x00000080
-#define TXx927_SIFCR_RDIL_8	0x00000100
-#define TXx927_SIFCR_RDIL_12	0x00000180
-#define TXx927_SIFCR_RDIL_MAX	0x00000180
-#define TXx927_SIFCR_TDIL_MASK	0x00000018
-#define TXx927_SIFCR_TDIL_MASK	0x00000018
-#define TXx927_SIFCR_TDIL_1	0x00000000
-#define TXx927_SIFCR_TDIL_4	0x00000001
-#define TXx927_SIFCR_TDIL_8	0x00000010
-#define TXx927_SIFCR_TDIL_MAX	0x00000010
-#define TXx927_SIFCR_TFRST	0x00000004
-#define TXx927_SIFCR_RFRST	0x00000002
-#define TXx927_SIFCR_FRSTE	0x00000001
-#define TXx927_SIO_TX_FIFO	8
-#define TXx927_SIO_RX_FIFO	16
-
-/* SIFLCR : Flow Control */
-#define TXx927_SIFLCR_RCS	0x00001000
-#define TXx927_SIFLCR_TES	0x00000800
-#define TXx927_SIFLCR_RTSSC	0x00000200
-#define TXx927_SIFLCR_RSDE	0x00000100
-#define TXx927_SIFLCR_TSDE	0x00000080
-#define TXx927_SIFLCR_RTSTL_MASK	0x0000001e
-#define TXx927_SIFLCR_RTSTL_MAX	0x0000001e
-#define TXx927_SIFLCR_TBRK	0x00000001
-
-/* SIBGR : Baudrate Control */
-#define TXx927_SIBGR_BCLK_MASK	0x00000300
-#define TXx927_SIBGR_BCLK_T0	0x00000000
-#define TXx927_SIBGR_BCLK_T2	0x00000100
-#define TXx927_SIBGR_BCLK_T4	0x00000200
-#define TXx927_SIBGR_BCLK_T6	0x00000300
-#define TXx927_SIBGR_BRD_MASK	0x000000ff
-
-/*
- * PIO
- */
-
-#endif /* __ASM_TXX9_TXX927_H */
diff --git a/include/asm-mips/txx9irq.h b/include/asm-mips/txx9irq.h
index 1c439e51b875..5620879be37f 100644
--- a/include/asm-mips/txx9irq.h
+++ b/include/asm-mips/txx9irq.h
@@ -14,8 +14,12 @@
 #ifdef CONFIG_IRQ_CPU
 #define TXX9_IRQ_BASE	(MIPS_CPU_IRQ_BASE + 8)
 #else
+#ifdef CONFIG_I8259
+#define TXX9_IRQ_BASE	(I8259A_IRQ_BASE + 16)
+#else
 #define TXX9_IRQ_BASE	0
 #endif
+#endif
 
 #ifdef CONFIG_CPU_TX39XX
 #define TXx9_MAX_IR 16
diff --git a/include/asm-mips/unistd.h b/include/asm-mips/unistd.h
index 4964c82f85f9..a73e1531e151 100644
--- a/include/asm-mips/unistd.h
+++ b/include/asm-mips/unistd.h
@@ -344,16 +344,22 @@
 #define __NR_timerfd_create		(__NR_Linux + 321)
 #define __NR_timerfd_gettime		(__NR_Linux + 322)
 #define __NR_timerfd_settime		(__NR_Linux + 323)
+#define __NR_signalfd4			(__NR_Linux + 324)
+#define __NR_eventfd2			(__NR_Linux + 325)
+#define __NR_epoll_create1		(__NR_Linux + 326)
+#define __NR_dup3			(__NR_Linux + 327)
+#define __NR_pipe2			(__NR_Linux + 328)
+#define __NR_inotify_init1		(__NR_Linux + 329)
 
 /*
  * Offset of the last Linux o32 flavoured syscall
  */
-#define __NR_Linux_syscalls		323
+#define __NR_Linux_syscalls		329
 
 #endif /* _MIPS_SIM == _MIPS_SIM_ABI32 */
 
 #define __NR_O32_Linux			4000
-#define __NR_O32_Linux_syscalls		323
+#define __NR_O32_Linux_syscalls		329
 
 #if _MIPS_SIM == _MIPS_SIM_ABI64
 
@@ -644,16 +650,22 @@
 #define __NR_timerfd_create		(__NR_Linux + 280)
 #define __NR_timerfd_gettime		(__NR_Linux + 281)
 #define __NR_timerfd_settime		(__NR_Linux + 282)
+#define __NR_signalfd4			(__NR_Linux + 283)
+#define __NR_eventfd2			(__NR_Linux + 284)
+#define __NR_epoll_create1		(__NR_Linux + 285)
+#define __NR_dup3			(__NR_Linux + 286)
+#define __NR_pipe2			(__NR_Linux + 287)
+#define __NR_inotify_init1		(__NR_Linux + 288)
 
 /*
  * Offset of the last Linux 64-bit flavoured syscall
  */
-#define __NR_Linux_syscalls		282
+#define __NR_Linux_syscalls		288
 
 #endif /* _MIPS_SIM == _MIPS_SIM_ABI64 */
 
 #define __NR_64_Linux			5000
-#define __NR_64_Linux_syscalls		282
+#define __NR_64_Linux_syscalls		288
 
 #if _MIPS_SIM == _MIPS_SIM_NABI32
 
@@ -948,16 +960,22 @@
 #define __NR_timerfd_create		(__NR_Linux + 284)
 #define __NR_timerfd_gettime		(__NR_Linux + 285)
 #define __NR_timerfd_settime		(__NR_Linux + 286)
+#define __NR_signalfd4			(__NR_Linux + 287)
+#define __NR_eventfd2			(__NR_Linux + 288)
+#define __NR_epoll_create1		(__NR_Linux + 289)
+#define __NR_dup3			(__NR_Linux + 290)
+#define __NR_pipe2			(__NR_Linux + 291)
+#define __NR_inotify_init1		(__NR_Linux + 292)
 
 /*
  * Offset of the last N32 flavoured syscall
  */
-#define __NR_Linux_syscalls		286
+#define __NR_Linux_syscalls		292
 
 #endif /* _MIPS_SIM == _MIPS_SIM_NABI32 */
 
 #define __NR_N32_Linux			6000
-#define __NR_N32_Linux_syscalls		286
+#define __NR_N32_Linux_syscalls		292
 
 #ifdef __KERNEL__
 
diff --git a/include/asm-mn10300/dma-mapping.h b/include/asm-mn10300/dma-mapping.h
index 7c882fca9ec8..ccae8f6c6326 100644
--- a/include/asm-mn10300/dma-mapping.h
+++ b/include/asm-mn10300/dma-mapping.h
@@ -182,7 +182,7 @@ void dma_sync_sg_for_device(struct device *dev, struct scatterlist *sg,
 }
 
 static inline
-int dma_mapping_error(dma_addr_t dma_addr)
+int dma_mapping_error(struct device *dev, dma_addr_t dma_addr)
 {
 	return 0;
 }
diff --git a/include/asm-mn10300/io.h b/include/asm-mn10300/io.h
index b8b6dc878250..c1a4119e6497 100644
--- a/include/asm-mn10300/io.h
+++ b/include/asm-mn10300/io.h
@@ -259,6 +259,8 @@ static inline void *ioremap_nocache(unsigned long offset, unsigned long size)
 	return (void *) (offset | 0x20000000);
 }
 
+#define ioremap_wc ioremap_nocache
+
 static inline void iounmap(void *addr)
 {
 }
diff --git a/include/asm-mn10300/kvm.h b/include/asm-mn10300/kvm.h
deleted file mode 100644
index f6b609ff4a57..000000000000
--- a/include/asm-mn10300/kvm.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef __LINUX_KVM_MN10300_H
-#define __LINUX_KVM_MN10300_H
-
-/* mn10300 does not support KVM */
-
-#endif
diff --git a/include/asm-mn10300/namei.h b/include/asm-mn10300/namei.h
deleted file mode 100644
index bd9ce94aeb65..000000000000
--- a/include/asm-mn10300/namei.h
+++ /dev/null
@@ -1,22 +0,0 @@
-/* Emulation stuff
- *
- * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
- * Written by David Howells (dhowells@redhat.com)
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public Licence
- * as published by the Free Software Foundation; either version
- * 2 of the Licence, or (at your option) any later version.
- */
-
-#ifndef _ASM_NAMEI_H
-#define _ASM_NAMEI_H
-
-/* This dummy routine maybe changed to something useful
- * for /usr/gnemul/ emulation stuff.
- * Look at asm-sparc/namei.h for details.
- */
-
-#define __emul_prefix() NULL
-
-#endif /* _ASM_NAMEI_H */
diff --git a/include/asm-mn10300/ptrace.h b/include/asm-mn10300/ptrace.h
index b3684689fcce..7b06cc623d8b 100644
--- a/include/asm-mn10300/ptrace.h
+++ b/include/asm-mn10300/ptrace.h
@@ -88,12 +88,16 @@ extern struct pt_regs *__frame; /* current frame pointer */
 /* options set using PTRACE_SETOPTIONS */
 #define PTRACE_O_TRACESYSGOOD     0x00000001
 
-#if defined(__KERNEL__) && !defined(__ASSEMBLY__)
+#if defined(__KERNEL__)
+
+#if !defined(__ASSEMBLY__)
 #define user_mode(regs)			(((regs)->epsw & EPSW_nSL) == EPSW_nSL)
 #define instruction_pointer(regs)	((regs)->pc)
 extern void show_regs(struct pt_regs *);
-#endif
+#endif  /*  !__ASSEMBLY  */
 
 #define profile_pc(regs) ((regs)->pc)
 
+#endif  /*  __KERNEL__  */
+
 #endif /* _ASM_PTRACE_H */
diff --git a/include/asm-mn10300/thread_info.h b/include/asm-mn10300/thread_info.h
index e397e7192785..78a3881f3c12 100644
--- a/include/asm-mn10300/thread_info.h
+++ b/include/asm-mn10300/thread_info.h
@@ -112,6 +112,8 @@ static inline unsigned long current_stack_pointer(void)
 	return sp;
 }
 
+#define __HAVE_ARCH_THREAD_INFO_ALLOCATOR
+
 /* thread information allocation */
 #ifdef CONFIG_DEBUG_STACK_USAGE
 #define alloc_thread_info(tsk) kzalloc(THREAD_SIZE, GFP_KERNEL)
diff --git a/include/asm-mn10300/unistd.h b/include/asm-mn10300/unistd.h
index 3721aa9e195d..543a4f98695d 100644
--- a/include/asm-mn10300/unistd.h
+++ b/include/asm-mn10300/unistd.h
@@ -338,6 +338,12 @@
 #define __NR_fallocate		325
 #define __NR_timerfd_settime	326
 #define __NR_timerfd_gettime	327
+#define __NR_signalfd4		328
+#define __NR_eventfd2		329
+#define __NR_epoll_create1	330
+#define __NR_dup3		331
+#define __NR_pipe2		332
+#define __NR_inotify_init1	333
 
 #ifdef __KERNEL__
 
diff --git a/include/asm-parisc/cacheflush.h b/include/asm-parisc/cacheflush.h
index 2f1e1b05440a..b7ca6dc7fddc 100644
--- a/include/asm-parisc/cacheflush.h
+++ b/include/asm-parisc/cacheflush.h
@@ -45,9 +45,9 @@ void flush_cache_mm(struct mm_struct *mm);
 extern void flush_dcache_page(struct page *page);
 
 #define flush_dcache_mmap_lock(mapping) \
-	write_lock_irq(&(mapping)->tree_lock)
+	spin_lock_irq(&(mapping)->tree_lock)
 #define flush_dcache_mmap_unlock(mapping) \
-	write_unlock_irq(&(mapping)->tree_lock)
+	spin_unlock_irq(&(mapping)->tree_lock)
 
 #define flush_icache_page(vma,page)	do { 		\
 	flush_kernel_dcache_page(page);			\
diff --git a/include/asm-parisc/dma-mapping.h b/include/asm-parisc/dma-mapping.h
index c6c0e9ff6bde..53af696f23d2 100644
--- a/include/asm-parisc/dma-mapping.h
+++ b/include/asm-parisc/dma-mapping.h
@@ -248,6 +248,6 @@ void * sba_get_iommu(struct parisc_device *dev);
 #endif
 
 /* At the moment, we panic on error for IOMMU resource exaustion */
-#define dma_mapping_error(x)	0
+#define dma_mapping_error(dev, x)	0
 
 #endif
diff --git a/include/asm-parisc/kvm.h b/include/asm-parisc/kvm.h
deleted file mode 100644
index 00cc45812547..000000000000
--- a/include/asm-parisc/kvm.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef __LINUX_KVM_PARISC_H
-#define __LINUX_KVM_PARISC_H
-
-/* parisc does not support KVM */
-
-#endif
diff --git a/include/asm-parisc/namei.h b/include/asm-parisc/namei.h
deleted file mode 100644
index 8d29b3d9fb33..000000000000
--- a/include/asm-parisc/namei.h
+++ /dev/null
@@ -1,17 +0,0 @@
-/* $Id: namei.h,v 1.1 1996/12/13 14:48:21 jj Exp $
- * linux/include/asm-parisc/namei.h
- *
- * Included from linux/fs/namei.c
- */
-
-#ifndef __PARISC_NAMEI_H
-#define __PARISC_NAMEI_H
-
-/* This dummy routine maybe changed to something useful
- * for /usr/gnemul/ emulation stuff.
- * Look at asm-sparc/namei.h for details.
- */
-
-#define __emul_prefix() NULL
-
-#endif /* __PARISC_NAMEI_H */
diff --git a/include/asm-parisc/ptrace.h b/include/asm-parisc/ptrace.h
index 93f990e418f1..3e94c5d85ff5 100644
--- a/include/asm-parisc/ptrace.h
+++ b/include/asm-parisc/ptrace.h
@@ -33,7 +33,6 @@ struct pt_regs {
 	unsigned long ipsw;	/* CR22 */
 };
 
-#define task_regs(task) ((struct pt_regs *) ((char *)(task) + TASK_REGS))
 /*
  * The numbers chosen here are somewhat arbitrary but absolutely MUST
  * not overlap with any of the number assigned in <linux/ptrace.h>.
@@ -43,8 +42,11 @@ struct pt_regs {
  * since we have taken branch traps too)
  */
 #define PTRACE_SINGLEBLOCK	12	/* resume execution until next branch */
+
 #ifdef __KERNEL__
 
+#define task_regs(task) ((struct pt_regs *) ((char *)(task) + TASK_REGS))
+
 /* XXX should we use iaoq[1] or iaoq[0] ? */
 #define user_mode(regs)			(((regs)->iaoq[0] & 3) ? 1 : 0)
 #define user_space(regs)		(((regs)->iasq[1] != 0) ? 1 : 0)
diff --git a/include/asm-parisc/thread_info.h b/include/asm-parisc/thread_info.h
index 2d9c7500867b..9f812741c355 100644
--- a/include/asm-parisc/thread_info.h
+++ b/include/asm-parisc/thread_info.h
@@ -34,15 +34,11 @@ struct thread_info {
 
 /* thread information allocation */
 
-#define THREAD_ORDER            2
+#define THREAD_SIZE_ORDER            2
 /* Be sure to hunt all references to this down when you change the size of
  * the kernel stack */
-#define THREAD_SIZE             (PAGE_SIZE << THREAD_ORDER)
-#define THREAD_SHIFT            (PAGE_SHIFT + THREAD_ORDER)
-
-#define alloc_thread_info(tsk) ((struct thread_info *) \
-			__get_free_pages(GFP_KERNEL, THREAD_ORDER))
-#define free_thread_info(ti)    free_pages((unsigned long) (ti), THREAD_ORDER)
+#define THREAD_SIZE             (PAGE_SIZE << THREAD_SIZE_ORDER)
+#define THREAD_SHIFT            (PAGE_SHIFT + THREAD_SIZE_ORDER)
 
 /* how to get the thread information struct from C */
 #define current_thread_info()	((struct thread_info *)mfctl(30))
diff --git a/include/asm-powerpc/Kbuild b/include/asm-powerpc/Kbuild
deleted file mode 100644
index 04ce8f8a2ee7..000000000000
--- a/include/asm-powerpc/Kbuild
+++ /dev/null
@@ -1,38 +0,0 @@
-include include/asm-generic/Kbuild.asm
-
-header-y += auxvec.h
-header-y += ioctls.h
-header-y += sembuf.h
-header-y += siginfo.h
-header-y += stat.h
-header-y += errno.h
-header-y += ipcbuf.h
-header-y += msgbuf.h
-header-y += shmbuf.h
-header-y += socket.h
-header-y += termbits.h
-header-y += fcntl.h
-header-y += poll.h
-header-y += sockios.h
-header-y += ucontext.h
-header-y += ioctl.h
-header-y += linkage.h
-header-y += resource.h
-header-y += sigcontext.h
-header-y += statfs.h
-header-y += ps3fb.h
-
-unifdef-y += bootx.h
-unifdef-y += byteorder.h
-unifdef-y += cputable.h
-unifdef-y += elf.h
-unifdef-y += nvram.h
-unifdef-y += param.h
-unifdef-y += posix_types.h
-unifdef-y += ptrace.h
-unifdef-y += seccomp.h
-unifdef-y += signal.h
-unifdef-y += spu_info.h
-unifdef-y += termios.h
-unifdef-y += types.h
-unifdef-y += unistd.h
diff --git a/include/asm-powerpc/dcr.h b/include/asm-powerpc/dcr.h
deleted file mode 100644
index 53b283050ab3..000000000000
--- a/include/asm-powerpc/dcr.h
+++ /dev/null
@@ -1,82 +0,0 @@
-/*
- * (c) Copyright 2006 Benjamin Herrenschmidt, IBM Corp.
- *                    <benh@kernel.crashing.org>
- *
- *   This program is free software;  you can redistribute it and/or modify
- *   it under the terms of the GNU General Public License as published by
- *   the Free Software Foundation; either version 2 of the License, or
- *   (at your option) any later version.
- *
- *   This program is distributed in the hope that it will be useful,
- *   but WITHOUT ANY WARRANTY;  without even the implied warranty of
- *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See
- *   the GNU General Public License for more details.
- *
- *   You should have received a copy of the GNU General Public License
- *   along with this program;  if not, write to the Free Software
- *   Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-
-#ifndef _ASM_POWERPC_DCR_H
-#define _ASM_POWERPC_DCR_H
-#ifdef __KERNEL__
-#ifndef __ASSEMBLY__
-#ifdef CONFIG_PPC_DCR
-
-#ifdef CONFIG_PPC_DCR_NATIVE
-#include <asm/dcr-native.h>
-#endif
-
-#ifdef CONFIG_PPC_DCR_MMIO
-#include <asm/dcr-mmio.h>
-#endif
-
-
-/* Indirection layer for providing both NATIVE and MMIO support. */
-
-#if defined(CONFIG_PPC_DCR_NATIVE) && defined(CONFIG_PPC_DCR_MMIO)
-
-#include <asm/dcr-generic.h>
-
-#define DCR_MAP_OK(host)	dcr_map_ok_generic(host)
-#define dcr_map(dev, dcr_n, dcr_c) dcr_map_generic(dev, dcr_n, dcr_c)
-#define dcr_unmap(host, dcr_c) dcr_unmap_generic(host, dcr_c)
-#define dcr_read(host, dcr_n) dcr_read_generic(host, dcr_n)
-#define dcr_write(host, dcr_n, value) dcr_write_generic(host, dcr_n, value)
-
-#else
-
-#ifdef CONFIG_PPC_DCR_NATIVE
-typedef dcr_host_native_t dcr_host_t;
-#define DCR_MAP_OK(host)	dcr_map_ok_native(host)
-#define dcr_map(dev, dcr_n, dcr_c) dcr_map_native(dev, dcr_n, dcr_c)
-#define dcr_unmap(host, dcr_c) dcr_unmap_native(host, dcr_c)
-#define dcr_read(host, dcr_n) dcr_read_native(host, dcr_n)
-#define dcr_write(host, dcr_n, value) dcr_write_native(host, dcr_n, value)
-#else
-typedef dcr_host_mmio_t dcr_host_t;
-#define DCR_MAP_OK(host)	dcr_map_ok_mmio(host)
-#define dcr_map(dev, dcr_n, dcr_c) dcr_map_mmio(dev, dcr_n, dcr_c)
-#define dcr_unmap(host, dcr_c) dcr_unmap_mmio(host, dcr_c)
-#define dcr_read(host, dcr_n) dcr_read_mmio(host, dcr_n)
-#define dcr_write(host, dcr_n, value) dcr_write_mmio(host, dcr_n, value)
-#endif
-
-#endif /* defined(CONFIG_PPC_DCR_NATIVE) && defined(CONFIG_PPC_DCR_MMIO) */
-
-/*
- * On CONFIG_PPC_MERGE, we have additional helpers to read the DCR
- * base from the device-tree
- */
-#ifdef CONFIG_PPC_MERGE
-struct device_node;
-extern unsigned int dcr_resource_start(struct device_node *np,
-				       unsigned int index);
-extern unsigned int dcr_resource_len(struct device_node *np,
-				     unsigned int index);
-#endif /* CONFIG_PPC_MERGE */
-
-#endif /* CONFIG_PPC_DCR */
-#endif /* __ASSEMBLY__ */
-#endif /* __KERNEL__ */
-#endif /* _ASM_POWERPC_DCR_H */
diff --git a/include/asm-powerpc/dma-mapping.h b/include/asm-powerpc/dma-mapping.h
deleted file mode 100644
index 74c549780987..000000000000
--- a/include/asm-powerpc/dma-mapping.h
+++ /dev/null
@@ -1,474 +0,0 @@
-/*
- * Copyright (C) 2004 IBM
- *
- * Implements the generic device dma API for powerpc.
- * the pci and vio busses
- */
-#ifndef _ASM_DMA_MAPPING_H
-#define _ASM_DMA_MAPPING_H
-#ifdef __KERNEL__
-
-#include <linux/types.h>
-#include <linux/cache.h>
-/* need struct page definitions */
-#include <linux/mm.h>
-#include <linux/scatterlist.h>
-#include <linux/dma-attrs.h>
-#include <asm/io.h>
-
-#define DMA_ERROR_CODE		(~(dma_addr_t)0x0)
-
-#ifdef CONFIG_NOT_COHERENT_CACHE
-/*
- * DMA-consistent mapping functions for PowerPCs that don't support
- * cache snooping.  These allocate/free a region of uncached mapped
- * memory space for use with DMA devices.  Alternatively, you could
- * allocate the space "normally" and use the cache management functions
- * to ensure it is consistent.
- */
-extern void *__dma_alloc_coherent(size_t size, dma_addr_t *handle, gfp_t gfp);
-extern void __dma_free_coherent(size_t size, void *vaddr);
-extern void __dma_sync(void *vaddr, size_t size, int direction);
-extern void __dma_sync_page(struct page *page, unsigned long offset,
-				 size_t size, int direction);
-
-#else /* ! CONFIG_NOT_COHERENT_CACHE */
-/*
- * Cache coherent cores.
- */
-
-#define __dma_alloc_coherent(gfp, size, handle)	NULL
-#define __dma_free_coherent(size, addr)		((void)0)
-#define __dma_sync(addr, size, rw)		((void)0)
-#define __dma_sync_page(pg, off, sz, rw)	((void)0)
-
-#endif /* ! CONFIG_NOT_COHERENT_CACHE */
-
-#ifdef CONFIG_PPC64
-
-static inline unsigned long device_to_mask(struct device *dev)
-{
-	if (dev->dma_mask && *dev->dma_mask)
-		return *dev->dma_mask;
-	/* Assume devices without mask can take 32 bit addresses */
-	return 0xfffffffful;
-}
-
-/*
- * DMA operations are abstracted for G5 vs. i/pSeries, PCI vs. VIO
- */
-struct dma_mapping_ops {
-	void *		(*alloc_coherent)(struct device *dev, size_t size,
-				dma_addr_t *dma_handle, gfp_t flag);
-	void		(*free_coherent)(struct device *dev, size_t size,
-				void *vaddr, dma_addr_t dma_handle);
-	dma_addr_t	(*map_single)(struct device *dev, void *ptr,
-				size_t size, enum dma_data_direction direction,
-				struct dma_attrs *attrs);
-	void		(*unmap_single)(struct device *dev, dma_addr_t dma_addr,
-				size_t size, enum dma_data_direction direction,
-				struct dma_attrs *attrs);
-	int		(*map_sg)(struct device *dev, struct scatterlist *sg,
-				int nents, enum dma_data_direction direction,
-				struct dma_attrs *attrs);
-	void		(*unmap_sg)(struct device *dev, struct scatterlist *sg,
-				int nents, enum dma_data_direction direction,
-				struct dma_attrs *attrs);
-	int		(*dma_supported)(struct device *dev, u64 mask);
-	int		(*set_dma_mask)(struct device *dev, u64 dma_mask);
-};
-
-static inline struct dma_mapping_ops *get_dma_ops(struct device *dev)
-{
-	/* We don't handle the NULL dev case for ISA for now. We could
-	 * do it via an out of line call but it is not needed for now. The
-	 * only ISA DMA device we support is the floppy and we have a hack
-	 * in the floppy driver directly to get a device for us.
-	 */
-	if (unlikely(dev == NULL || dev->archdata.dma_ops == NULL))
-		return NULL;
-	return dev->archdata.dma_ops;
-}
-
-static inline void set_dma_ops(struct device *dev, struct dma_mapping_ops *ops)
-{
-	dev->archdata.dma_ops = ops;
-}
-
-static inline int dma_supported(struct device *dev, u64 mask)
-{
-	struct dma_mapping_ops *dma_ops = get_dma_ops(dev);
-
-	if (unlikely(dma_ops == NULL))
-		return 0;
-	if (dma_ops->dma_supported == NULL)
-		return 1;
-	return dma_ops->dma_supported(dev, mask);
-}
-
-/* We have our own implementation of pci_set_dma_mask() */
-#define HAVE_ARCH_PCI_SET_DMA_MASK
-
-static inline int dma_set_mask(struct device *dev, u64 dma_mask)
-{
-	struct dma_mapping_ops *dma_ops = get_dma_ops(dev);
-
-	if (unlikely(dma_ops == NULL))
-		return -EIO;
-	if (dma_ops->set_dma_mask != NULL)
-		return dma_ops->set_dma_mask(dev, dma_mask);
-	if (!dev->dma_mask || !dma_supported(dev, dma_mask))
-		return -EIO;
-	*dev->dma_mask = dma_mask;
-	return 0;
-}
-
-static inline dma_addr_t dma_map_single_attrs(struct device *dev,
-					      void *cpu_addr,
-					      size_t size,
-					      enum dma_data_direction direction,
-					      struct dma_attrs *attrs)
-{
-	struct dma_mapping_ops *dma_ops = get_dma_ops(dev);
-
-	BUG_ON(!dma_ops);
-	return dma_ops->map_single(dev, cpu_addr, size, direction, attrs);
-}
-
-static inline void dma_unmap_single_attrs(struct device *dev,
-					  dma_addr_t dma_addr,
-					  size_t size,
-					  enum dma_data_direction direction,
-					  struct dma_attrs *attrs)
-{
-	struct dma_mapping_ops *dma_ops = get_dma_ops(dev);
-
-	BUG_ON(!dma_ops);
-	dma_ops->unmap_single(dev, dma_addr, size, direction, attrs);
-}
-
-static inline dma_addr_t dma_map_page_attrs(struct device *dev,
-					    struct page *page,
-					    unsigned long offset, size_t size,
-					    enum dma_data_direction direction,
-					    struct dma_attrs *attrs)
-{
-	struct dma_mapping_ops *dma_ops = get_dma_ops(dev);
-
-	BUG_ON(!dma_ops);
-	return dma_ops->map_single(dev, page_address(page) + offset, size,
-			direction, attrs);
-}
-
-static inline void dma_unmap_page_attrs(struct device *dev,
-					dma_addr_t dma_address,
-					size_t size,
-					enum dma_data_direction direction,
-					struct dma_attrs *attrs)
-{
-	struct dma_mapping_ops *dma_ops = get_dma_ops(dev);
-
-	BUG_ON(!dma_ops);
-	dma_ops->unmap_single(dev, dma_address, size, direction, attrs);
-}
-
-static inline int dma_map_sg_attrs(struct device *dev, struct scatterlist *sg,
-				   int nents, enum dma_data_direction direction,
-				   struct dma_attrs *attrs)
-{
-	struct dma_mapping_ops *dma_ops = get_dma_ops(dev);
-
-	BUG_ON(!dma_ops);
-	return dma_ops->map_sg(dev, sg, nents, direction, attrs);
-}
-
-static inline void dma_unmap_sg_attrs(struct device *dev,
-				      struct scatterlist *sg,
-				      int nhwentries,
-				      enum dma_data_direction direction,
-				      struct dma_attrs *attrs)
-{
-	struct dma_mapping_ops *dma_ops = get_dma_ops(dev);
-
-	BUG_ON(!dma_ops);
-	dma_ops->unmap_sg(dev, sg, nhwentries, direction, attrs);
-}
-
-static inline void *dma_alloc_coherent(struct device *dev, size_t size,
-				       dma_addr_t *dma_handle, gfp_t flag)
-{
-	struct dma_mapping_ops *dma_ops = get_dma_ops(dev);
-
-	BUG_ON(!dma_ops);
-	return dma_ops->alloc_coherent(dev, size, dma_handle, flag);
-}
-
-static inline void dma_free_coherent(struct device *dev, size_t size,
-				     void *cpu_addr, dma_addr_t dma_handle)
-{
-	struct dma_mapping_ops *dma_ops = get_dma_ops(dev);
-
-	BUG_ON(!dma_ops);
-	dma_ops->free_coherent(dev, size, cpu_addr, dma_handle);
-}
-
-static inline dma_addr_t dma_map_single(struct device *dev, void *cpu_addr,
-					size_t size,
-					enum dma_data_direction direction)
-{
-	return dma_map_single_attrs(dev, cpu_addr, size, direction, NULL);
-}
-
-static inline void dma_unmap_single(struct device *dev, dma_addr_t dma_addr,
-				    size_t size,
-				    enum dma_data_direction direction)
-{
-	dma_unmap_single_attrs(dev, dma_addr, size, direction, NULL);
-}
-
-static inline dma_addr_t dma_map_page(struct device *dev, struct page *page,
-				      unsigned long offset, size_t size,
-				      enum dma_data_direction direction)
-{
-	return dma_map_page_attrs(dev, page, offset, size, direction, NULL);
-}
-
-static inline void dma_unmap_page(struct device *dev, dma_addr_t dma_address,
-				  size_t size,
-				  enum dma_data_direction direction)
-{
-	dma_unmap_page_attrs(dev, dma_address, size, direction, NULL);
-}
-
-static inline int dma_map_sg(struct device *dev, struct scatterlist *sg,
-			     int nents, enum dma_data_direction direction)
-{
-	return dma_map_sg_attrs(dev, sg, nents, direction, NULL);
-}
-
-static inline void dma_unmap_sg(struct device *dev, struct scatterlist *sg,
-				int nhwentries,
-				enum dma_data_direction direction)
-{
-	dma_unmap_sg_attrs(dev, sg, nhwentries, direction, NULL);
-}
-
-/*
- * Available generic sets of operations
- */
-extern struct dma_mapping_ops dma_iommu_ops;
-extern struct dma_mapping_ops dma_direct_ops;
-
-#else /* CONFIG_PPC64 */
-
-#define dma_supported(dev, mask)	(1)
-
-static inline int dma_set_mask(struct device *dev, u64 dma_mask)
-{
-	if (!dev->dma_mask || !dma_supported(dev, mask))
-		return -EIO;
-
-	*dev->dma_mask = dma_mask;
-
-	return 0;
-}
-
-static inline void *dma_alloc_coherent(struct device *dev, size_t size,
-				       dma_addr_t * dma_handle,
-				       gfp_t gfp)
-{
-#ifdef CONFIG_NOT_COHERENT_CACHE
-	return __dma_alloc_coherent(size, dma_handle, gfp);
-#else
-	void *ret;
-	/* ignore region specifiers */
-	gfp &= ~(__GFP_DMA | __GFP_HIGHMEM);
-
-	if (dev == NULL || dev->coherent_dma_mask < 0xffffffff)
-		gfp |= GFP_DMA;
-
-	ret = (void *)__get_free_pages(gfp, get_order(size));
-
-	if (ret != NULL) {
-		memset(ret, 0, size);
-		*dma_handle = virt_to_bus(ret);
-	}
-
-	return ret;
-#endif
-}
-
-static inline void
-dma_free_coherent(struct device *dev, size_t size, void *vaddr,
-		  dma_addr_t dma_handle)
-{
-#ifdef CONFIG_NOT_COHERENT_CACHE
-	__dma_free_coherent(size, vaddr);
-#else
-	free_pages((unsigned long)vaddr, get_order(size));
-#endif
-}
-
-static inline dma_addr_t
-dma_map_single(struct device *dev, void *ptr, size_t size,
-	       enum dma_data_direction direction)
-{
-	BUG_ON(direction == DMA_NONE);
-
-	__dma_sync(ptr, size, direction);
-
-	return virt_to_bus(ptr);
-}
-
-static inline void dma_unmap_single(struct device *dev, dma_addr_t dma_addr,
-				    size_t size,
-				    enum dma_data_direction direction)
-{
-	/* We do nothing. */
-}
-
-static inline dma_addr_t
-dma_map_page(struct device *dev, struct page *page,
-	     unsigned long offset, size_t size,
-	     enum dma_data_direction direction)
-{
-	BUG_ON(direction == DMA_NONE);
-
-	__dma_sync_page(page, offset, size, direction);
-
-	return page_to_bus(page) + offset;
-}
-
-static inline void dma_unmap_page(struct device *dev, dma_addr_t dma_address,
-				  size_t size,
-				  enum dma_data_direction direction)
-{
-	/* We do nothing. */
-}
-
-static inline int
-dma_map_sg(struct device *dev, struct scatterlist *sgl, int nents,
-	   enum dma_data_direction direction)
-{
-	struct scatterlist *sg;
-	int i;
-
-	BUG_ON(direction == DMA_NONE);
-
-	for_each_sg(sgl, sg, nents, i) {
-		BUG_ON(!sg_page(sg));
-		__dma_sync_page(sg_page(sg), sg->offset, sg->length, direction);
-		sg->dma_address = page_to_bus(sg_page(sg)) + sg->offset;
-	}
-
-	return nents;
-}
-
-static inline void dma_unmap_sg(struct device *dev, struct scatterlist *sg,
-				int nhwentries,
-				enum dma_data_direction direction)
-{
-	/* We don't do anything here. */
-}
-
-#endif /* CONFIG_PPC64 */
-
-static inline void dma_sync_single_for_cpu(struct device *dev,
-		dma_addr_t dma_handle, size_t size,
-		enum dma_data_direction direction)
-{
-	BUG_ON(direction == DMA_NONE);
-	__dma_sync(bus_to_virt(dma_handle), size, direction);
-}
-
-static inline void dma_sync_single_for_device(struct device *dev,
-		dma_addr_t dma_handle, size_t size,
-		enum dma_data_direction direction)
-{
-	BUG_ON(direction == DMA_NONE);
-	__dma_sync(bus_to_virt(dma_handle), size, direction);
-}
-
-static inline void dma_sync_sg_for_cpu(struct device *dev,
-		struct scatterlist *sgl, int nents,
-		enum dma_data_direction direction)
-{
-	struct scatterlist *sg;
-	int i;
-
-	BUG_ON(direction == DMA_NONE);
-
-	for_each_sg(sgl, sg, nents, i)
-		__dma_sync_page(sg_page(sg), sg->offset, sg->length, direction);
-}
-
-static inline void dma_sync_sg_for_device(struct device *dev,
-		struct scatterlist *sgl, int nents,
-		enum dma_data_direction direction)
-{
-	struct scatterlist *sg;
-	int i;
-
-	BUG_ON(direction == DMA_NONE);
-
-	for_each_sg(sgl, sg, nents, i)
-		__dma_sync_page(sg_page(sg), sg->offset, sg->length, direction);
-}
-
-static inline int dma_mapping_error(dma_addr_t dma_addr)
-{
-#ifdef CONFIG_PPC64
-	return (dma_addr == DMA_ERROR_CODE);
-#else
-	return 0;
-#endif
-}
-
-#define dma_alloc_noncoherent(d, s, h, f) dma_alloc_coherent(d, s, h, f)
-#define dma_free_noncoherent(d, s, v, h) dma_free_coherent(d, s, v, h)
-#ifdef CONFIG_NOT_COHERENT_CACHE
-#define dma_is_consistent(d, h)	(0)
-#else
-#define dma_is_consistent(d, h)	(1)
-#endif
-
-static inline int dma_get_cache_alignment(void)
-{
-#ifdef CONFIG_PPC64
-	/* no easy way to get cache size on all processors, so return
-	 * the maximum possible, to be safe */
-	return (1 << INTERNODE_CACHE_SHIFT);
-#else
-	/*
-	 * Each processor family will define its own L1_CACHE_SHIFT,
-	 * L1_CACHE_BYTES wraps to this, so this is always safe.
-	 */
-	return L1_CACHE_BYTES;
-#endif
-}
-
-static inline void dma_sync_single_range_for_cpu(struct device *dev,
-		dma_addr_t dma_handle, unsigned long offset, size_t size,
-		enum dma_data_direction direction)
-{
-	/* just sync everything for now */
-	dma_sync_single_for_cpu(dev, dma_handle, offset + size, direction);
-}
-
-static inline void dma_sync_single_range_for_device(struct device *dev,
-		dma_addr_t dma_handle, unsigned long offset, size_t size,
-		enum dma_data_direction direction)
-{
-	/* just sync everything for now */
-	dma_sync_single_for_device(dev, dma_handle, offset + size, direction);
-}
-
-static inline void dma_cache_sync(struct device *dev, void *vaddr, size_t size,
-		enum dma_data_direction direction)
-{
-	BUG_ON(direction == DMA_NONE);
-	__dma_sync(vaddr, size, (int)direction);
-}
-
-#endif /* __KERNEL__ */
-#endif	/* _ASM_DMA_MAPPING_H */
diff --git a/include/asm-powerpc/elf.h b/include/asm-powerpc/elf.h
deleted file mode 100644
index 89664675b469..000000000000
--- a/include/asm-powerpc/elf.h
+++ /dev/null
@@ -1,416 +0,0 @@
-#ifndef _ASM_POWERPC_ELF_H
-#define _ASM_POWERPC_ELF_H
-
-#ifdef __KERNEL__
-#include <linux/sched.h>	/* for task_struct */
-#include <asm/page.h>
-#include <asm/string.h>
-#endif
-
-#include <asm/types.h>
-#include <asm/ptrace.h>
-#include <asm/cputable.h>
-#include <asm/auxvec.h>
-
-/* PowerPC relocations defined by the ABIs */
-#define R_PPC_NONE		0
-#define R_PPC_ADDR32		1	/* 32bit absolute address */
-#define R_PPC_ADDR24		2	/* 26bit address, 2 bits ignored.  */
-#define R_PPC_ADDR16		3	/* 16bit absolute address */
-#define R_PPC_ADDR16_LO		4	/* lower 16bit of absolute address */
-#define R_PPC_ADDR16_HI		5	/* high 16bit of absolute address */
-#define R_PPC_ADDR16_HA		6	/* adjusted high 16bit */
-#define R_PPC_ADDR14		7	/* 16bit address, 2 bits ignored */
-#define R_PPC_ADDR14_BRTAKEN	8
-#define R_PPC_ADDR14_BRNTAKEN	9
-#define R_PPC_REL24		10	/* PC relative 26 bit */
-#define R_PPC_REL14		11	/* PC relative 16 bit */
-#define R_PPC_REL14_BRTAKEN	12
-#define R_PPC_REL14_BRNTAKEN	13
-#define R_PPC_GOT16		14
-#define R_PPC_GOT16_LO		15
-#define R_PPC_GOT16_HI		16
-#define R_PPC_GOT16_HA		17
-#define R_PPC_PLTREL24		18
-#define R_PPC_COPY		19
-#define R_PPC_GLOB_DAT		20
-#define R_PPC_JMP_SLOT		21
-#define R_PPC_RELATIVE		22
-#define R_PPC_LOCAL24PC		23
-#define R_PPC_UADDR32		24
-#define R_PPC_UADDR16		25
-#define R_PPC_REL32		26
-#define R_PPC_PLT32		27
-#define R_PPC_PLTREL32		28
-#define R_PPC_PLT16_LO		29
-#define R_PPC_PLT16_HI		30
-#define R_PPC_PLT16_HA		31
-#define R_PPC_SDAREL16		32
-#define R_PPC_SECTOFF		33
-#define R_PPC_SECTOFF_LO	34
-#define R_PPC_SECTOFF_HI	35
-#define R_PPC_SECTOFF_HA	36
-
-/* PowerPC relocations defined for the TLS access ABI.  */
-#define R_PPC_TLS		67 /* none	(sym+add)@tls */
-#define R_PPC_DTPMOD32		68 /* word32	(sym+add)@dtpmod */
-#define R_PPC_TPREL16		69 /* half16*	(sym+add)@tprel */
-#define R_PPC_TPREL16_LO	70 /* half16	(sym+add)@tprel@l */
-#define R_PPC_TPREL16_HI	71 /* half16	(sym+add)@tprel@h */
-#define R_PPC_TPREL16_HA	72 /* half16	(sym+add)@tprel@ha */
-#define R_PPC_TPREL32		73 /* word32	(sym+add)@tprel */
-#define R_PPC_DTPREL16		74 /* half16*	(sym+add)@dtprel */
-#define R_PPC_DTPREL16_LO	75 /* half16	(sym+add)@dtprel@l */
-#define R_PPC_DTPREL16_HI	76 /* half16	(sym+add)@dtprel@h */
-#define R_PPC_DTPREL16_HA	77 /* half16	(sym+add)@dtprel@ha */
-#define R_PPC_DTPREL32		78 /* word32	(sym+add)@dtprel */
-#define R_PPC_GOT_TLSGD16	79 /* half16*	(sym+add)@got@tlsgd */
-#define R_PPC_GOT_TLSGD16_LO	80 /* half16	(sym+add)@got@tlsgd@l */
-#define R_PPC_GOT_TLSGD16_HI	81 /* half16	(sym+add)@got@tlsgd@h */
-#define R_PPC_GOT_TLSGD16_HA	82 /* half16	(sym+add)@got@tlsgd@ha */
-#define R_PPC_GOT_TLSLD16	83 /* half16*	(sym+add)@got@tlsld */
-#define R_PPC_GOT_TLSLD16_LO	84 /* half16	(sym+add)@got@tlsld@l */
-#define R_PPC_GOT_TLSLD16_HI	85 /* half16	(sym+add)@got@tlsld@h */
-#define R_PPC_GOT_TLSLD16_HA	86 /* half16	(sym+add)@got@tlsld@ha */
-#define R_PPC_GOT_TPREL16	87 /* half16*	(sym+add)@got@tprel */
-#define R_PPC_GOT_TPREL16_LO	88 /* half16	(sym+add)@got@tprel@l */
-#define R_PPC_GOT_TPREL16_HI	89 /* half16	(sym+add)@got@tprel@h */
-#define R_PPC_GOT_TPREL16_HA	90 /* half16	(sym+add)@got@tprel@ha */
-#define R_PPC_GOT_DTPREL16	91 /* half16*	(sym+add)@got@dtprel */
-#define R_PPC_GOT_DTPREL16_LO	92 /* half16*	(sym+add)@got@dtprel@l */
-#define R_PPC_GOT_DTPREL16_HI	93 /* half16*	(sym+add)@got@dtprel@h */
-#define R_PPC_GOT_DTPREL16_HA	94 /* half16*	(sym+add)@got@dtprel@ha */
-
-/* keep this the last entry. */
-#define R_PPC_NUM		95
-
-/*
- * ELF register definitions..
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-
-#define ELF_NGREG	48	/* includes nip, msr, lr, etc. */
-#define ELF_NFPREG	33	/* includes fpscr */
-
-typedef unsigned long elf_greg_t64;
-typedef elf_greg_t64 elf_gregset_t64[ELF_NGREG];
-
-typedef unsigned int elf_greg_t32;
-typedef elf_greg_t32 elf_gregset_t32[ELF_NGREG];
-typedef elf_gregset_t32 compat_elf_gregset_t;
-
-/*
- * ELF_ARCH, CLASS, and DATA are used to set parameters in the core dumps.
- */
-#ifdef __powerpc64__
-# define ELF_NVRREG32	33	/* includes vscr & vrsave stuffed together */
-# define ELF_NVRREG	34	/* includes vscr & vrsave in split vectors */
-# define ELF_NVSRHALFREG 32	/* Half the vsx registers */
-# define ELF_GREG_TYPE	elf_greg_t64
-#else
-# define ELF_NEVRREG	34	/* includes acc (as 2) */
-# define ELF_NVRREG	33	/* includes vscr */
-# define ELF_GREG_TYPE	elf_greg_t32
-# define ELF_ARCH	EM_PPC
-# define ELF_CLASS	ELFCLASS32
-# define ELF_DATA	ELFDATA2MSB
-#endif /* __powerpc64__ */
-
-#ifndef ELF_ARCH
-# define ELF_ARCH	EM_PPC64
-# define ELF_CLASS	ELFCLASS64
-# define ELF_DATA	ELFDATA2MSB
-  typedef elf_greg_t64 elf_greg_t;
-  typedef elf_gregset_t64 elf_gregset_t;
-#else
-  /* Assumption: ELF_ARCH == EM_PPC and ELF_CLASS == ELFCLASS32 */
-  typedef elf_greg_t32 elf_greg_t;
-  typedef elf_gregset_t32 elf_gregset_t;
-#endif /* ELF_ARCH */
-
-/* Floating point registers */
-typedef double elf_fpreg_t;
-typedef elf_fpreg_t elf_fpregset_t[ELF_NFPREG];
-
-/* Altivec registers */
-/*
- * The entries with indexes 0-31 contain the corresponding vector registers. 
- * The entry with index 32 contains the vscr as the last word (offset 12) 
- * within the quadword.  This allows the vscr to be stored as either a 
- * quadword (since it must be copied via a vector register to/from storage) 
- * or as a word.  
- *
- * 64-bit kernel notes: The entry at index 33 contains the vrsave as the first  
- * word (offset 0) within the quadword.
- *
- * This definition of the VMX state is compatible with the current PPC32 
- * ptrace interface.  This allows signal handling and ptrace to use the same 
- * structures.  This also simplifies the implementation of a bi-arch 
- * (combined (32- and 64-bit) gdb.
- *
- * Note that it's _not_ compatible with 32 bits ucontext which stuffs the
- * vrsave along with vscr and so only uses 33 vectors for the register set
- */
-typedef __vector128 elf_vrreg_t;
-typedef elf_vrreg_t elf_vrregset_t[ELF_NVRREG];
-#ifdef __powerpc64__
-typedef elf_vrreg_t elf_vrregset_t32[ELF_NVRREG32];
-typedef elf_fpreg_t elf_vsrreghalf_t32[ELF_NVSRHALFREG];
-#endif
-
-#ifdef __KERNEL__
-/*
- * This is used to ensure we don't load something for the wrong architecture.
- */
-#define elf_check_arch(x) ((x)->e_machine == ELF_ARCH)
-#define compat_elf_check_arch(x)	((x)->e_machine == EM_PPC)
-
-#define USE_ELF_CORE_DUMP
-#define CORE_DUMP_USE_REGSET
-#define ELF_EXEC_PAGESIZE	PAGE_SIZE
-
-/* This is the location that an ET_DYN program is loaded if exec'ed.  Typical
-   use of this is to invoke "./ld.so someprog" to test out a new version of
-   the loader.  We need to make sure that it is out of the way of the program
-   that it will "exec", and that there is sufficient room for the brk.  */
-
-#define ELF_ET_DYN_BASE         (0x20000000)
-
-/*
- * Our registers are always unsigned longs, whether we're a 32 bit
- * process or 64 bit, on either a 64 bit or 32 bit kernel.
- *
- * This macro relies on elf_regs[i] having the right type to truncate to,
- * either u32 or u64.  It defines the body of the elf_core_copy_regs
- * function, either the native one with elf_gregset_t elf_regs or
- * the 32-bit one with elf_gregset_t32 elf_regs.
- */
-#define PPC_ELF_CORE_COPY_REGS(elf_regs, regs) \
-	int i, nregs = min(sizeof(*regs) / sizeof(unsigned long), \
-			   (size_t)ELF_NGREG);			  \
-	for (i = 0; i < nregs; i++) \
-		elf_regs[i] = ((unsigned long *) regs)[i]; \
-	memset(&elf_regs[i], 0, (ELF_NGREG - i) * sizeof(elf_regs[0]))
-
-/* Common routine for both 32-bit and 64-bit native processes */
-static inline void ppc_elf_core_copy_regs(elf_gregset_t elf_regs,
-					  struct pt_regs *regs)
-{
-	PPC_ELF_CORE_COPY_REGS(elf_regs, regs);
-}
-#define ELF_CORE_COPY_REGS(gregs, regs) ppc_elf_core_copy_regs(gregs, regs);
-
-typedef elf_vrregset_t elf_fpxregset_t;
-
-/* ELF_HWCAP yields a mask that user programs can use to figure out what
-   instruction set this cpu supports.  This could be done in userspace,
-   but it's not easy, and we've already done it here.  */
-# define ELF_HWCAP	(cur_cpu_spec->cpu_user_features)
-
-/* This yields a string that ld.so will use to load implementation
-   specific libraries for optimization.  This is more specific in
-   intent than poking at uname or /proc/cpuinfo.  */
-
-#define ELF_PLATFORM	(cur_cpu_spec->platform)
-
-#ifdef __powerpc64__
-# define ELF_PLAT_INIT(_r, load_addr)	do {	\
-	_r->gpr[2] = load_addr; 		\
-} while (0)
-#endif /* __powerpc64__ */
-
-#ifdef __powerpc64__
-# define SET_PERSONALITY(ex, ibcs2)				\
-do {								\
-	unsigned long new_flags = 0;				\
-	if ((ex).e_ident[EI_CLASS] == ELFCLASS32)		\
-		new_flags = _TIF_32BIT;				\
-	if ((current_thread_info()->flags & _TIF_32BIT)		\
-	    != new_flags)					\
-		set_thread_flag(TIF_ABI_PENDING);		\
-	else							\
-		clear_thread_flag(TIF_ABI_PENDING);		\
-	if (personality(current->personality) != PER_LINUX32)	\
-		set_personality(PER_LINUX |			\
-			(current->personality & (~PER_MASK)));	\
-} while (0)
-/*
- * An executable for which elf_read_implies_exec() returns TRUE will
- * have the READ_IMPLIES_EXEC personality flag set automatically. This
- * is only required to work around bugs in old 32bit toolchains. Since
- * the 64bit ABI has never had these issues dont enable the workaround
- * even if we have an executable stack.
- */
-# define elf_read_implies_exec(ex, exec_stk) (test_thread_flag(TIF_32BIT) ? \
-		(exec_stk != EXSTACK_DISABLE_X) : 0)
-#else 
-# define SET_PERSONALITY(ex, ibcs2) set_personality((ibcs2)?PER_SVR4:PER_LINUX)
-#endif /* __powerpc64__ */
-
-extern int dcache_bsize;
-extern int icache_bsize;
-extern int ucache_bsize;
-
-/* vDSO has arch_setup_additional_pages */
-#define ARCH_HAS_SETUP_ADDITIONAL_PAGES
-struct linux_binprm;
-extern int arch_setup_additional_pages(struct linux_binprm *bprm,
-				       int executable_stack);
-#define VDSO_AUX_ENT(a,b) NEW_AUX_ENT(a,b);
-
-#endif /* __KERNEL__ */
-
-/*
- * The requirements here are:
- * - keep the final alignment of sp (sp & 0xf)
- * - make sure the 32-bit value at the first 16 byte aligned position of
- *   AUXV is greater than 16 for glibc compatibility.
- *   AT_IGNOREPPC is used for that.
- * - for compatibility with glibc ARCH_DLINFO must always be defined on PPC,
- *   even if DLINFO_ARCH_ITEMS goes to zero or is undefined.
- * update AT_VECTOR_SIZE_ARCH if the number of NEW_AUX_ENT entries changes
- */
-#define ARCH_DLINFO							\
-do {									\
-	/* Handle glibc compatibility. */				\
-	NEW_AUX_ENT(AT_IGNOREPPC, AT_IGNOREPPC);			\
-	NEW_AUX_ENT(AT_IGNOREPPC, AT_IGNOREPPC);			\
-	/* Cache size items */						\
-	NEW_AUX_ENT(AT_DCACHEBSIZE, dcache_bsize);			\
-	NEW_AUX_ENT(AT_ICACHEBSIZE, icache_bsize);			\
-	NEW_AUX_ENT(AT_UCACHEBSIZE, ucache_bsize);			\
-	VDSO_AUX_ENT(AT_SYSINFO_EHDR, current->mm->context.vdso_base)	\
-} while (0)
-
-/* PowerPC64 relocations defined by the ABIs */
-#define R_PPC64_NONE    R_PPC_NONE
-#define R_PPC64_ADDR32  R_PPC_ADDR32  /* 32bit absolute address.  */
-#define R_PPC64_ADDR24  R_PPC_ADDR24  /* 26bit address, word aligned.  */
-#define R_PPC64_ADDR16  R_PPC_ADDR16  /* 16bit absolute address. */
-#define R_PPC64_ADDR16_LO R_PPC_ADDR16_LO /* lower 16bits of abs. address.  */
-#define R_PPC64_ADDR16_HI R_PPC_ADDR16_HI /* high 16bits of abs. address. */
-#define R_PPC64_ADDR16_HA R_PPC_ADDR16_HA /* adjusted high 16bits.  */
-#define R_PPC64_ADDR14 R_PPC_ADDR14   /* 16bit address, word aligned.  */
-#define R_PPC64_ADDR14_BRTAKEN  R_PPC_ADDR14_BRTAKEN
-#define R_PPC64_ADDR14_BRNTAKEN R_PPC_ADDR14_BRNTAKEN
-#define R_PPC64_REL24   R_PPC_REL24 /* PC relative 26 bit, word aligned.  */
-#define R_PPC64_REL14   R_PPC_REL14 /* PC relative 16 bit. */
-#define R_PPC64_REL14_BRTAKEN   R_PPC_REL14_BRTAKEN
-#define R_PPC64_REL14_BRNTAKEN  R_PPC_REL14_BRNTAKEN
-#define R_PPC64_GOT16     R_PPC_GOT16
-#define R_PPC64_GOT16_LO  R_PPC_GOT16_LO
-#define R_PPC64_GOT16_HI  R_PPC_GOT16_HI
-#define R_PPC64_GOT16_HA  R_PPC_GOT16_HA
-
-#define R_PPC64_COPY      R_PPC_COPY
-#define R_PPC64_GLOB_DAT  R_PPC_GLOB_DAT
-#define R_PPC64_JMP_SLOT  R_PPC_JMP_SLOT
-#define R_PPC64_RELATIVE  R_PPC_RELATIVE
-
-#define R_PPC64_UADDR32   R_PPC_UADDR32
-#define R_PPC64_UADDR16   R_PPC_UADDR16
-#define R_PPC64_REL32     R_PPC_REL32
-#define R_PPC64_PLT32     R_PPC_PLT32
-#define R_PPC64_PLTREL32  R_PPC_PLTREL32
-#define R_PPC64_PLT16_LO  R_PPC_PLT16_LO
-#define R_PPC64_PLT16_HI  R_PPC_PLT16_HI
-#define R_PPC64_PLT16_HA  R_PPC_PLT16_HA
-
-#define R_PPC64_SECTOFF     R_PPC_SECTOFF
-#define R_PPC64_SECTOFF_LO  R_PPC_SECTOFF_LO
-#define R_PPC64_SECTOFF_HI  R_PPC_SECTOFF_HI
-#define R_PPC64_SECTOFF_HA  R_PPC_SECTOFF_HA
-#define R_PPC64_ADDR30          37  /* word30 (S + A - P) >> 2.  */
-#define R_PPC64_ADDR64          38  /* doubleword64 S + A.  */
-#define R_PPC64_ADDR16_HIGHER   39  /* half16 #higher(S + A).  */
-#define R_PPC64_ADDR16_HIGHERA  40  /* half16 #highera(S + A).  */
-#define R_PPC64_ADDR16_HIGHEST  41  /* half16 #highest(S + A).  */
-#define R_PPC64_ADDR16_HIGHESTA 42  /* half16 #highesta(S + A). */
-#define R_PPC64_UADDR64     43  /* doubleword64 S + A.  */
-#define R_PPC64_REL64       44  /* doubleword64 S + A - P.  */
-#define R_PPC64_PLT64       45  /* doubleword64 L + A.  */
-#define R_PPC64_PLTREL64    46  /* doubleword64 L + A - P.  */
-#define R_PPC64_TOC16       47  /* half16* S + A - .TOC.  */
-#define R_PPC64_TOC16_LO    48  /* half16 #lo(S + A - .TOC.).  */
-#define R_PPC64_TOC16_HI    49  /* half16 #hi(S + A - .TOC.).  */
-#define R_PPC64_TOC16_HA    50  /* half16 #ha(S + A - .TOC.).  */
-#define R_PPC64_TOC         51  /* doubleword64 .TOC. */
-#define R_PPC64_PLTGOT16    52  /* half16* M + A.  */
-#define R_PPC64_PLTGOT16_LO 53  /* half16 #lo(M + A).  */
-#define R_PPC64_PLTGOT16_HI 54  /* half16 #hi(M + A).  */
-#define R_PPC64_PLTGOT16_HA 55  /* half16 #ha(M + A).  */
-
-#define R_PPC64_ADDR16_DS      56 /* half16ds* (S + A) >> 2.  */
-#define R_PPC64_ADDR16_LO_DS   57 /* half16ds  #lo(S + A) >> 2.  */
-#define R_PPC64_GOT16_DS       58 /* half16ds* (G + A) >> 2.  */
-#define R_PPC64_GOT16_LO_DS    59 /* half16ds  #lo(G + A) >> 2.  */
-#define R_PPC64_PLT16_LO_DS    60 /* half16ds  #lo(L + A) >> 2.  */
-#define R_PPC64_SECTOFF_DS     61 /* half16ds* (R + A) >> 2.  */
-#define R_PPC64_SECTOFF_LO_DS  62 /* half16ds  #lo(R + A) >> 2.  */
-#define R_PPC64_TOC16_DS       63 /* half16ds* (S + A - .TOC.) >> 2.  */
-#define R_PPC64_TOC16_LO_DS    64 /* half16ds  #lo(S + A - .TOC.) >> 2.  */
-#define R_PPC64_PLTGOT16_DS    65 /* half16ds* (M + A) >> 2.  */
-#define R_PPC64_PLTGOT16_LO_DS 66 /* half16ds  #lo(M + A) >> 2.  */
-
-/* PowerPC64 relocations defined for the TLS access ABI.  */
-#define R_PPC64_TLS		67 /* none	(sym+add)@tls */
-#define R_PPC64_DTPMOD64	68 /* doubleword64 (sym+add)@dtpmod */
-#define R_PPC64_TPREL16		69 /* half16*	(sym+add)@tprel */
-#define R_PPC64_TPREL16_LO	70 /* half16	(sym+add)@tprel@l */
-#define R_PPC64_TPREL16_HI	71 /* half16	(sym+add)@tprel@h */
-#define R_PPC64_TPREL16_HA	72 /* half16	(sym+add)@tprel@ha */
-#define R_PPC64_TPREL64		73 /* doubleword64 (sym+add)@tprel */
-#define R_PPC64_DTPREL16	74 /* half16*	(sym+add)@dtprel */
-#define R_PPC64_DTPREL16_LO	75 /* half16	(sym+add)@dtprel@l */
-#define R_PPC64_DTPREL16_HI	76 /* half16	(sym+add)@dtprel@h */
-#define R_PPC64_DTPREL16_HA	77 /* half16	(sym+add)@dtprel@ha */
-#define R_PPC64_DTPREL64	78 /* doubleword64 (sym+add)@dtprel */
-#define R_PPC64_GOT_TLSGD16	79 /* half16*	(sym+add)@got@tlsgd */
-#define R_PPC64_GOT_TLSGD16_LO	80 /* half16	(sym+add)@got@tlsgd@l */
-#define R_PPC64_GOT_TLSGD16_HI	81 /* half16	(sym+add)@got@tlsgd@h */
-#define R_PPC64_GOT_TLSGD16_HA	82 /* half16	(sym+add)@got@tlsgd@ha */
-#define R_PPC64_GOT_TLSLD16	83 /* half16*	(sym+add)@got@tlsld */
-#define R_PPC64_GOT_TLSLD16_LO	84 /* half16	(sym+add)@got@tlsld@l */
-#define R_PPC64_GOT_TLSLD16_HI	85 /* half16	(sym+add)@got@tlsld@h */
-#define R_PPC64_GOT_TLSLD16_HA	86 /* half16	(sym+add)@got@tlsld@ha */
-#define R_PPC64_GOT_TPREL16_DS	87 /* half16ds*	(sym+add)@got@tprel */
-#define R_PPC64_GOT_TPREL16_LO_DS 88 /* half16ds (sym+add)@got@tprel@l */
-#define R_PPC64_GOT_TPREL16_HI	89 /* half16	(sym+add)@got@tprel@h */
-#define R_PPC64_GOT_TPREL16_HA	90 /* half16	(sym+add)@got@tprel@ha */
-#define R_PPC64_GOT_DTPREL16_DS	91 /* half16ds*	(sym+add)@got@dtprel */
-#define R_PPC64_GOT_DTPREL16_LO_DS 92 /* half16ds (sym+add)@got@dtprel@l */
-#define R_PPC64_GOT_DTPREL16_HI	93 /* half16	(sym+add)@got@dtprel@h */
-#define R_PPC64_GOT_DTPREL16_HA	94 /* half16	(sym+add)@got@dtprel@ha */
-#define R_PPC64_TPREL16_DS	95 /* half16ds*	(sym+add)@tprel */
-#define R_PPC64_TPREL16_LO_DS	96 /* half16ds	(sym+add)@tprel@l */
-#define R_PPC64_TPREL16_HIGHER	97 /* half16	(sym+add)@tprel@higher */
-#define R_PPC64_TPREL16_HIGHERA	98 /* half16	(sym+add)@tprel@highera */
-#define R_PPC64_TPREL16_HIGHEST	99 /* half16	(sym+add)@tprel@highest */
-#define R_PPC64_TPREL16_HIGHESTA 100 /* half16	(sym+add)@tprel@highesta */
-#define R_PPC64_DTPREL16_DS	101 /* half16ds* (sym+add)@dtprel */
-#define R_PPC64_DTPREL16_LO_DS	102 /* half16ds	(sym+add)@dtprel@l */
-#define R_PPC64_DTPREL16_HIGHER	103 /* half16	(sym+add)@dtprel@higher */
-#define R_PPC64_DTPREL16_HIGHERA 104 /* half16	(sym+add)@dtprel@highera */
-#define R_PPC64_DTPREL16_HIGHEST 105 /* half16	(sym+add)@dtprel@highest */
-#define R_PPC64_DTPREL16_HIGHESTA 106 /* half16	(sym+add)@dtprel@highesta */
-
-/* Keep this the last entry.  */
-#define R_PPC64_NUM		107
-
-#ifdef  __KERNEL__
-
-#ifdef CONFIG_SPU_BASE
-/* Notes used in ET_CORE. Note name is "SPU/<fd>/<filename>". */
-#define NT_SPU		1
-
-#define ARCH_HAVE_EXTRA_ELF_NOTES
-
-#endif /* CONFIG_SPU_BASE */
-
-#endif /* __KERNEL */
-
-#endif /* _ASM_POWERPC_ELF_H */
diff --git a/include/asm-powerpc/gpio.h b/include/asm-powerpc/gpio.h
deleted file mode 100644
index 77ad3a890f30..000000000000
--- a/include/asm-powerpc/gpio.h
+++ /dev/null
@@ -1,56 +0,0 @@
-/*
- * Generic GPIO API implementation for PowerPC.
- *
- * Copyright (c) 2007-2008  MontaVista Software, Inc.
- *
- * Author: Anton Vorontsov <avorontsov@ru.mvista.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#ifndef __ASM_POWERPC_GPIO_H
-#define __ASM_POWERPC_GPIO_H
-
-#include <linux/errno.h>
-#include <asm-generic/gpio.h>
-
-#ifdef CONFIG_HAVE_GPIO_LIB
-
-/*
- * We don't (yet) implement inlined/rapid versions for on-chip gpios.
- * Just call gpiolib.
- */
-static inline int gpio_get_value(unsigned int gpio)
-{
-	return __gpio_get_value(gpio);
-}
-
-static inline void gpio_set_value(unsigned int gpio, int value)
-{
-	__gpio_set_value(gpio, value);
-}
-
-static inline int gpio_cansleep(unsigned int gpio)
-{
-	return __gpio_cansleep(gpio);
-}
-
-/*
- * Not implemented, yet.
- */
-static inline int gpio_to_irq(unsigned int gpio)
-{
-	return -ENOSYS;
-}
-
-static inline int irq_to_gpio(unsigned int irq)
-{
-	return -EINVAL;
-}
-
-#endif /* CONFIG_HAVE_GPIO_LIB */
-
-#endif /* __ASM_POWERPC_GPIO_H */
diff --git a/include/asm-powerpc/i8259.h b/include/asm-powerpc/i8259.h
deleted file mode 100644
index db1362f8c603..000000000000
--- a/include/asm-powerpc/i8259.h
+++ /dev/null
@@ -1,17 +0,0 @@
-#ifndef _ASM_POWERPC_I8259_H
-#define _ASM_POWERPC_I8259_H
-#ifdef __KERNEL__
-
-#include <linux/irq.h>
-
-#ifdef CONFIG_PPC_MERGE
-extern void i8259_init(struct device_node *node, unsigned long intack_addr);
-extern unsigned int i8259_irq(void);
-extern struct irq_host *i8259_get_host(void);
-#else
-extern void i8259_init(unsigned long intack_addr, int offset);
-extern int i8259_irq(void);
-#endif
-
-#endif /* __KERNEL__ */
-#endif /* _ASM_POWERPC_I8259_H */
diff --git a/include/asm-powerpc/ide.h b/include/asm-powerpc/ide.h
deleted file mode 100644
index 1aaf27be8741..000000000000
--- a/include/asm-powerpc/ide.h
+++ /dev/null
@@ -1,59 +0,0 @@
-/*
- *  Copyright (C) 1994-1996 Linus Torvalds & authors
- *
- *  This file contains the powerpc architecture specific IDE code.
- */
-#ifndef _ASM_POWERPC_IDE_H
-#define _ASM_POWERPC_IDE_H
-
-#ifdef __KERNEL__
-
-#ifndef __powerpc64__
-#include <linux/sched.h>
-#include <asm/mpc8xx.h>
-#endif
-#include <asm/io.h>
-
-#define __ide_mm_insw(p, a, c)	readsw((void __iomem *)(p), (a), (c))
-#define __ide_mm_insl(p, a, c)	readsl((void __iomem *)(p), (a), (c))
-#define __ide_mm_outsw(p, a, c)	writesw((void __iomem *)(p), (a), (c))
-#define __ide_mm_outsl(p, a, c)	writesl((void __iomem *)(p), (a), (c))
-
-#ifndef  __powerpc64__
-#include <linux/hdreg.h>
-#include <linux/ioport.h>
-
-/* FIXME: use ide_platform host driver */
-static __inline__ int ide_default_irq(unsigned long base)
-{
-#ifdef CONFIG_PPLUS
-	switch (base) {
-	case 0x1f0:	return 14;
-	case 0x170:	return 15;
-	}
-#endif
-	return 0;
-}
-
-/* FIXME: use ide_platform host driver */
-static __inline__ unsigned long ide_default_io_base(int index)
-{
-#ifdef CONFIG_PPLUS
-	switch (index) {
-	case 0:		return 0x1f0;
-	case 1:		return 0x170;
-	}
-#endif
-	return 0;
-}
-
-#ifdef CONFIG_BLK_DEV_MPC8xx_IDE
-#define IDE_ARCH_ACK_INTR  1
-#define ide_ack_intr(hwif) ((hwif)->ack_intr ? (hwif)->ack_intr(hwif) : 1)
-#endif
-
-#endif /* __powerpc64__ */
-
-#endif /* __KERNEL__ */
-
-#endif /* _ASM_POWERPC_IDE_H */
diff --git a/include/asm-powerpc/irq.h b/include/asm-powerpc/irq.h
deleted file mode 100644
index 1ef8e304e0ea..000000000000
--- a/include/asm-powerpc/irq.h
+++ /dev/null
@@ -1,654 +0,0 @@
-#ifdef __KERNEL__
-#ifndef _ASM_POWERPC_IRQ_H
-#define _ASM_POWERPC_IRQ_H
-
-/*
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-
-#include <linux/threads.h>
-#include <linux/list.h>
-#include <linux/radix-tree.h>
-
-#include <asm/types.h>
-#include <asm/atomic.h>
-
-
-#define get_irq_desc(irq) (&irq_desc[(irq)])
-
-/* Define a way to iterate across irqs. */
-#define for_each_irq(i) \
-	for ((i) = 0; (i) < NR_IRQS; ++(i))
-
-extern atomic_t ppc_n_lost_interrupts;
-
-#ifdef CONFIG_PPC_MERGE
-
-/* This number is used when no interrupt has been assigned */
-#define NO_IRQ			(0)
-
-/* This is a special irq number to return from get_irq() to tell that
- * no interrupt happened _and_ ignore it (don't count it as bad). Some
- * platforms like iSeries rely on that.
- */
-#define NO_IRQ_IGNORE		((unsigned int)-1)
-
-/* Total number of virq in the platform (make it a CONFIG_* option ? */
-#define NR_IRQS		512
-
-/* Number of irqs reserved for the legacy controller */
-#define NUM_ISA_INTERRUPTS	16
-
-/* This type is the placeholder for a hardware interrupt number. It has to
- * be big enough to enclose whatever representation is used by a given
- * platform.
- */
-typedef unsigned long irq_hw_number_t;
-
-/* Interrupt controller "host" data structure. This could be defined as a
- * irq domain controller. That is, it handles the mapping between hardware
- * and virtual interrupt numbers for a given interrupt domain. The host
- * structure is generally created by the PIC code for a given PIC instance
- * (though a host can cover more than one PIC if they have a flat number
- * model). It's the host callbacks that are responsible for setting the
- * irq_chip on a given irq_desc after it's been mapped.
- *
- * The host code and data structures are fairly agnostic to the fact that
- * we use an open firmware device-tree. We do have references to struct
- * device_node in two places: in irq_find_host() to find the host matching
- * a given interrupt controller node, and of course as an argument to its
- * counterpart host->ops->match() callback. However, those are treated as
- * generic pointers by the core and the fact that it's actually a device-node
- * pointer is purely a convention between callers and implementation. This
- * code could thus be used on other architectures by replacing those two
- * by some sort of arch-specific void * "token" used to identify interrupt
- * controllers.
- */
-struct irq_host;
-struct radix_tree_root;
-
-/* Functions below are provided by the host and called whenever a new mapping
- * is created or an old mapping is disposed. The host can then proceed to
- * whatever internal data structures management is required. It also needs
- * to setup the irq_desc when returning from map().
- */
-struct irq_host_ops {
-	/* Match an interrupt controller device node to a host, returns
-	 * 1 on a match
-	 */
-	int (*match)(struct irq_host *h, struct device_node *node);
-
-	/* Create or update a mapping between a virtual irq number and a hw
-	 * irq number. This is called only once for a given mapping.
-	 */
-	int (*map)(struct irq_host *h, unsigned int virq, irq_hw_number_t hw);
-
-	/* Dispose of such a mapping */
-	void (*unmap)(struct irq_host *h, unsigned int virq);
-
-	/* Update of such a mapping  */
-	void (*remap)(struct irq_host *h, unsigned int virq, irq_hw_number_t hw);
-
-	/* Translate device-tree interrupt specifier from raw format coming
-	 * from the firmware to a irq_hw_number_t (interrupt line number) and
-	 * type (sense) that can be passed to set_irq_type(). In the absence
-	 * of this callback, irq_create_of_mapping() and irq_of_parse_and_map()
-	 * will return the hw number in the first cell and IRQ_TYPE_NONE for
-	 * the type (which amount to keeping whatever default value the
-	 * interrupt controller has for that line)
-	 */
-	int (*xlate)(struct irq_host *h, struct device_node *ctrler,
-		     u32 *intspec, unsigned int intsize,
-		     irq_hw_number_t *out_hwirq, unsigned int *out_type);
-};
-
-struct irq_host {
-	struct list_head	link;
-
-	/* type of reverse mapping technique */
-	unsigned int		revmap_type;
-#define IRQ_HOST_MAP_LEGACY     0 /* legacy 8259, gets irqs 1..15 */
-#define IRQ_HOST_MAP_NOMAP	1 /* no fast reverse mapping */
-#define IRQ_HOST_MAP_LINEAR	2 /* linear map of interrupts */
-#define IRQ_HOST_MAP_TREE	3 /* radix tree */
-	union {
-		struct {
-			unsigned int size;
-			unsigned int *revmap;
-		} linear;
-		struct radix_tree_root tree;
-	} revmap_data;
-	struct irq_host_ops	*ops;
-	void			*host_data;
-	irq_hw_number_t		inval_irq;
-
-	/* Optional device node pointer */
-	struct device_node	*of_node;
-};
-
-/* The main irq map itself is an array of NR_IRQ entries containing the
- * associate host and irq number. An entry with a host of NULL is free.
- * An entry can be allocated if it's free, the allocator always then sets
- * hwirq first to the host's invalid irq number and then fills ops.
- */
-struct irq_map_entry {
-	irq_hw_number_t	hwirq;
-	struct irq_host	*host;
-};
-
-extern struct irq_map_entry irq_map[NR_IRQS];
-
-extern irq_hw_number_t virq_to_hw(unsigned int virq);
-
-/**
- * irq_alloc_host - Allocate a new irq_host data structure
- * @of_node: optional device-tree node of the interrupt controller
- * @revmap_type: type of reverse mapping to use
- * @revmap_arg: for IRQ_HOST_MAP_LINEAR linear only: size of the map
- * @ops: map/unmap host callbacks
- * @inval_irq: provide a hw number in that host space that is always invalid
- *
- * Allocates and initialize and irq_host structure. Note that in the case of
- * IRQ_HOST_MAP_LEGACY, the map() callback will be called before this returns
- * for all legacy interrupts except 0 (which is always the invalid irq for
- * a legacy controller). For a IRQ_HOST_MAP_LINEAR, the map is allocated by
- * this call as well. For a IRQ_HOST_MAP_TREE, the radix tree will be allocated
- * later during boot automatically (the reverse mapping will use the slow path
- * until that happens).
- */
-extern struct irq_host *irq_alloc_host(struct device_node *of_node,
-				       unsigned int revmap_type,
-				       unsigned int revmap_arg,
-				       struct irq_host_ops *ops,
-				       irq_hw_number_t inval_irq);
-
-
-/**
- * irq_find_host - Locates a host for a given device node
- * @node: device-tree node of the interrupt controller
- */
-extern struct irq_host *irq_find_host(struct device_node *node);
-
-
-/**
- * irq_set_default_host - Set a "default" host
- * @host: default host pointer
- *
- * For convenience, it's possible to set a "default" host that will be used
- * whenever NULL is passed to irq_create_mapping(). It makes life easier for
- * platforms that want to manipulate a few hard coded interrupt numbers that
- * aren't properly represented in the device-tree.
- */
-extern void irq_set_default_host(struct irq_host *host);
-
-
-/**
- * irq_set_virq_count - Set the maximum number of virt irqs
- * @count: number of linux virtual irqs, capped with NR_IRQS
- *
- * This is mainly for use by platforms like iSeries who want to program
- * the virtual irq number in the controller to avoid the reverse mapping
- */
-extern void irq_set_virq_count(unsigned int count);
-
-
-/**
- * irq_create_mapping - Map a hardware interrupt into linux virq space
- * @host: host owning this hardware interrupt or NULL for default host
- * @hwirq: hardware irq number in that host space
- *
- * Only one mapping per hardware interrupt is permitted. Returns a linux
- * virq number.
- * If the sense/trigger is to be specified, set_irq_type() should be called
- * on the number returned from that call.
- */
-extern unsigned int irq_create_mapping(struct irq_host *host,
-				       irq_hw_number_t hwirq);
-
-
-/**
- * irq_dispose_mapping - Unmap an interrupt
- * @virq: linux virq number of the interrupt to unmap
- */
-extern void irq_dispose_mapping(unsigned int virq);
-
-/**
- * irq_find_mapping - Find a linux virq from an hw irq number.
- * @host: host owning this hardware interrupt
- * @hwirq: hardware irq number in that host space
- *
- * This is a slow path, for use by generic code. It's expected that an
- * irq controller implementation directly calls the appropriate low level
- * mapping function.
- */
-extern unsigned int irq_find_mapping(struct irq_host *host,
-				     irq_hw_number_t hwirq);
-
-/**
- * irq_create_direct_mapping - Allocate a virq for direct mapping
- * @host: host to allocate the virq for or NULL for default host
- *
- * This routine is used for irq controllers which can choose the hardware
- * interrupt numbers they generate. In such a case it's simplest to use
- * the linux virq as the hardware interrupt number.
- */
-extern unsigned int irq_create_direct_mapping(struct irq_host *host);
-
-/**
- * irq_radix_revmap - Find a linux virq from a hw irq number.
- * @host: host owning this hardware interrupt
- * @hwirq: hardware irq number in that host space
- *
- * This is a fast path, for use by irq controller code that uses radix tree
- * revmaps
- */
-extern unsigned int irq_radix_revmap(struct irq_host *host,
-				     irq_hw_number_t hwirq);
-
-/**
- * irq_linear_revmap - Find a linux virq from a hw irq number.
- * @host: host owning this hardware interrupt
- * @hwirq: hardware irq number in that host space
- *
- * This is a fast path, for use by irq controller code that uses linear
- * revmaps. It does fallback to the slow path if the revmap doesn't exist
- * yet and will create the revmap entry with appropriate locking
- */
-
-extern unsigned int irq_linear_revmap(struct irq_host *host,
-				      irq_hw_number_t hwirq);
-
-
-
-/**
- * irq_alloc_virt - Allocate virtual irq numbers
- * @host: host owning these new virtual irqs
- * @count: number of consecutive numbers to allocate
- * @hint: pass a hint number, the allocator will try to use a 1:1 mapping
- *
- * This is a low level function that is used internally by irq_create_mapping()
- * and that can be used by some irq controllers implementations for things
- * like allocating ranges of numbers for MSIs. The revmaps are left untouched.
- */
-extern unsigned int irq_alloc_virt(struct irq_host *host,
-				   unsigned int count,
-				   unsigned int hint);
-
-/**
- * irq_free_virt - Free virtual irq numbers
- * @virq: virtual irq number of the first interrupt to free
- * @count: number of interrupts to free
- *
- * This function is the opposite of irq_alloc_virt. It will not clear reverse
- * maps, this should be done previously by unmap'ing the interrupt. In fact,
- * all interrupts covered by the range being freed should have been unmapped
- * prior to calling this.
- */
-extern void irq_free_virt(unsigned int virq, unsigned int count);
-
-
-/* -- OF helpers -- */
-
-/* irq_create_of_mapping - Map a hardware interrupt into linux virq space
- * @controller: Device node of the interrupt controller
- * @inspec: Interrupt specifier from the device-tree
- * @intsize: Size of the interrupt specifier from the device-tree
- *
- * This function is identical to irq_create_mapping except that it takes
- * as input informations straight from the device-tree (typically the results
- * of the of_irq_map_*() functions.
- */
-extern unsigned int irq_create_of_mapping(struct device_node *controller,
-					  u32 *intspec, unsigned int intsize);
-
-
-/* irq_of_parse_and_map - Parse nad Map an interrupt into linux virq space
- * @device: Device node of the device whose interrupt is to be mapped
- * @index: Index of the interrupt to map
- *
- * This function is a wrapper that chains of_irq_map_one() and
- * irq_create_of_mapping() to make things easier to callers
- */
-extern unsigned int irq_of_parse_and_map(struct device_node *dev, int index);
-
-/* -- End OF helpers -- */
-
-/**
- * irq_early_init - Init irq remapping subsystem
- */
-extern void irq_early_init(void);
-
-static __inline__ int irq_canonicalize(int irq)
-{
-	return irq;
-}
-
-
-#else /* CONFIG_PPC_MERGE */
-
-/* This number is used when no interrupt has been assigned */
-#define NO_IRQ			(-1)
-#define NO_IRQ_IGNORE		(-2)
-
-
-/*
- * These constants are used for passing information about interrupt
- * signal polarity and level/edge sensing to the low-level PIC chip
- * drivers.
- */
-#define IRQ_SENSE_MASK		0x1
-#define IRQ_SENSE_LEVEL		0x1	/* interrupt on active level */
-#define IRQ_SENSE_EDGE		0x0	/* interrupt triggered by edge */
-
-#define IRQ_POLARITY_MASK	0x2
-#define IRQ_POLARITY_POSITIVE	0x2	/* high level or low->high edge */
-#define IRQ_POLARITY_NEGATIVE	0x0	/* low level or high->low edge */
-
-
-#if defined(CONFIG_40x)
-#include <asm/ibm4xx.h>
-
-#ifndef NR_BOARD_IRQS
-#define NR_BOARD_IRQS 0
-#endif
-
-#ifndef UIC_WIDTH /* Number of interrupts per device */
-#define UIC_WIDTH 32
-#endif
-
-#ifndef NR_UICS /* number  of UIC devices */
-#define NR_UICS 1
-#endif
-
-#if defined (CONFIG_403)
-/*
- * The PowerPC 403 cores' Asynchronous Interrupt Controller (AIC) has
- * 32 possible interrupts, a majority of which are not implemented on
- * all cores. There are six configurable, external interrupt pins and
- * there are eight internal interrupts for the on-chip serial port
- * (SPU), DMA controller, and JTAG controller.
- *
- */
-
-#define	NR_AIC_IRQS 32
-#define	NR_IRQS	 (NR_AIC_IRQS + NR_BOARD_IRQS)
-
-#elif !defined (CONFIG_403)
-
-/*
- *  The PowerPC 405 cores' Universal Interrupt Controller (UIC) has 32
- * possible interrupts as well. There are seven, configurable external
- * interrupt pins and there are 17 internal interrupts for the on-chip
- * serial port, DMA controller, on-chip Ethernet controller, PCI, etc.
- *
- */
-
-
-#define NR_UIC_IRQS UIC_WIDTH
-#define NR_IRQS		((NR_UIC_IRQS * NR_UICS) + NR_BOARD_IRQS)
-#endif
-
-#elif defined(CONFIG_44x)
-#include <asm/ibm44x.h>
-
-#define	NR_UIC_IRQS	32
-#define	NR_IRQS		((NR_UIC_IRQS * NR_UICS) + NR_BOARD_IRQS)
-
-#elif defined(CONFIG_8xx)
-
-/* Now include the board configuration specific associations.
-*/
-#include <asm/mpc8xx.h>
-
-/* The MPC8xx cores have 16 possible interrupts.  There are eight
- * possible level sensitive interrupts assigned and generated internally
- * from such devices as CPM, PCMCIA, RTC, PIT, TimeBase and Decrementer.
- * There are eight external interrupts (IRQs) that can be configured
- * as either level or edge sensitive.
- *
- * On some implementations, there is also the possibility of an 8259
- * through the PCI and PCI-ISA bridges.
- *
- * We are "flattening" the interrupt vectors of the cascaded CPM
- * and 8259 interrupt controllers so that we can uniquely identify
- * any interrupt source with a single integer.
- */
-#define NR_SIU_INTS	16
-#define NR_CPM_INTS	32
-#ifndef NR_8259_INTS
-#define NR_8259_INTS 0
-#endif
-
-#define SIU_IRQ_OFFSET		0
-#define CPM_IRQ_OFFSET		(SIU_IRQ_OFFSET + NR_SIU_INTS)
-#define I8259_IRQ_OFFSET	(CPM_IRQ_OFFSET + NR_CPM_INTS)
-
-#define NR_IRQS	(NR_SIU_INTS + NR_CPM_INTS + NR_8259_INTS)
-
-/* These values must be zero-based and map 1:1 with the SIU configuration.
- * They are used throughout the 8xx I/O subsystem to generate
- * interrupt masks, flags, and other control patterns.  This is why the
- * current kernel assumption of the 8259 as the base controller is such
- * a pain in the butt.
- */
-#define	SIU_IRQ0	(0)	/* Highest priority */
-#define	SIU_LEVEL0	(1)
-#define	SIU_IRQ1	(2)
-#define	SIU_LEVEL1	(3)
-#define	SIU_IRQ2	(4)
-#define	SIU_LEVEL2	(5)
-#define	SIU_IRQ3	(6)
-#define	SIU_LEVEL3	(7)
-#define	SIU_IRQ4	(8)
-#define	SIU_LEVEL4	(9)
-#define	SIU_IRQ5	(10)
-#define	SIU_LEVEL5	(11)
-#define	SIU_IRQ6	(12)
-#define	SIU_LEVEL6	(13)
-#define	SIU_IRQ7	(14)
-#define	SIU_LEVEL7	(15)
-
-#define MPC8xx_INT_FEC1		SIU_LEVEL1
-#define MPC8xx_INT_FEC2		SIU_LEVEL3
-
-#define MPC8xx_INT_SCC1		(CPM_IRQ_OFFSET + CPMVEC_SCC1)
-#define MPC8xx_INT_SCC2		(CPM_IRQ_OFFSET + CPMVEC_SCC2)
-#define MPC8xx_INT_SCC3		(CPM_IRQ_OFFSET + CPMVEC_SCC3)
-#define MPC8xx_INT_SCC4		(CPM_IRQ_OFFSET + CPMVEC_SCC4)
-#define MPC8xx_INT_SMC1		(CPM_IRQ_OFFSET + CPMVEC_SMC1)
-#define MPC8xx_INT_SMC2		(CPM_IRQ_OFFSET + CPMVEC_SMC2)
-
-/* The internal interrupts we can configure as we see fit.
- * My personal preference is CPM at level 2, which puts it above the
- * MBX PCI/ISA/IDE interrupts.
- */
-#ifndef PIT_INTERRUPT
-#define PIT_INTERRUPT		SIU_LEVEL0
-#endif
-#ifndef	CPM_INTERRUPT
-#define CPM_INTERRUPT		SIU_LEVEL2
-#endif
-#ifndef	PCMCIA_INTERRUPT
-#define PCMCIA_INTERRUPT	SIU_LEVEL6
-#endif
-#ifndef	DEC_INTERRUPT
-#define DEC_INTERRUPT		SIU_LEVEL7
-#endif
-
-/* Some internal interrupt registers use an 8-bit mask for the interrupt
- * level instead of a number.
- */
-#define	mk_int_int_mask(IL) (1 << (7 - (IL/2)))
-
-#else /* CONFIG_40x + CONFIG_8xx */
-/*
- * this is the # irq's for all ppc arch's (pmac/chrp/prep)
- * so it is the max of them all
- */
-#define NR_IRQS			256
-#define __DO_IRQ_CANON	1
-
-#ifndef CONFIG_8260
-
-#define NUM_8259_INTERRUPTS	16
-
-#else /* CONFIG_8260 */
-
-/* The 8260 has an internal interrupt controller with a maximum of
- * 64 IRQs.  We will use NR_IRQs from above since it is large enough.
- * Don't be confused by the 8260 documentation where they list an
- * "interrupt number" and "interrupt vector".  We are only interested
- * in the interrupt vector.  There are "reserved" holes where the
- * vector number increases, but the interrupt number in the table does not.
- * (Document errata updates have fixed this...make sure you have up to
- * date processor documentation -- Dan).
- */
-
-#ifndef CPM_IRQ_OFFSET
-#define CPM_IRQ_OFFSET	0
-#endif
-
-#define NR_CPM_INTS	64
-
-#define	SIU_INT_ERROR		((uint)0x00 + CPM_IRQ_OFFSET)
-#define	SIU_INT_I2C		((uint)0x01 + CPM_IRQ_OFFSET)
-#define	SIU_INT_SPI		((uint)0x02 + CPM_IRQ_OFFSET)
-#define	SIU_INT_RISC		((uint)0x03 + CPM_IRQ_OFFSET)
-#define	SIU_INT_SMC1		((uint)0x04 + CPM_IRQ_OFFSET)
-#define	SIU_INT_SMC2		((uint)0x05 + CPM_IRQ_OFFSET)
-#define	SIU_INT_IDMA1		((uint)0x06 + CPM_IRQ_OFFSET)
-#define	SIU_INT_IDMA2		((uint)0x07 + CPM_IRQ_OFFSET)
-#define	SIU_INT_IDMA3		((uint)0x08 + CPM_IRQ_OFFSET)
-#define	SIU_INT_IDMA4		((uint)0x09 + CPM_IRQ_OFFSET)
-#define	SIU_INT_SDMA		((uint)0x0a + CPM_IRQ_OFFSET)
-#define	SIU_INT_USB		((uint)0x0b + CPM_IRQ_OFFSET)
-#define	SIU_INT_TIMER1		((uint)0x0c + CPM_IRQ_OFFSET)
-#define	SIU_INT_TIMER2		((uint)0x0d + CPM_IRQ_OFFSET)
-#define	SIU_INT_TIMER3		((uint)0x0e + CPM_IRQ_OFFSET)
-#define	SIU_INT_TIMER4		((uint)0x0f + CPM_IRQ_OFFSET)
-#define	SIU_INT_TMCNT		((uint)0x10 + CPM_IRQ_OFFSET)
-#define	SIU_INT_PIT		((uint)0x11 + CPM_IRQ_OFFSET)
-#define	SIU_INT_PCI		((uint)0x12 + CPM_IRQ_OFFSET)
-#define	SIU_INT_IRQ1		((uint)0x13 + CPM_IRQ_OFFSET)
-#define	SIU_INT_IRQ2		((uint)0x14 + CPM_IRQ_OFFSET)
-#define	SIU_INT_IRQ3		((uint)0x15 + CPM_IRQ_OFFSET)
-#define	SIU_INT_IRQ4		((uint)0x16 + CPM_IRQ_OFFSET)
-#define	SIU_INT_IRQ5		((uint)0x17 + CPM_IRQ_OFFSET)
-#define	SIU_INT_IRQ6		((uint)0x18 + CPM_IRQ_OFFSET)
-#define	SIU_INT_IRQ7		((uint)0x19 + CPM_IRQ_OFFSET)
-#define	SIU_INT_FCC1		((uint)0x20 + CPM_IRQ_OFFSET)
-#define	SIU_INT_FCC2		((uint)0x21 + CPM_IRQ_OFFSET)
-#define	SIU_INT_FCC3		((uint)0x22 + CPM_IRQ_OFFSET)
-#define	SIU_INT_MCC1		((uint)0x24 + CPM_IRQ_OFFSET)
-#define	SIU_INT_MCC2		((uint)0x25 + CPM_IRQ_OFFSET)
-#define	SIU_INT_SCC1		((uint)0x28 + CPM_IRQ_OFFSET)
-#define	SIU_INT_SCC2		((uint)0x29 + CPM_IRQ_OFFSET)
-#define	SIU_INT_SCC3		((uint)0x2a + CPM_IRQ_OFFSET)
-#define	SIU_INT_SCC4		((uint)0x2b + CPM_IRQ_OFFSET)
-#define	SIU_INT_PC15		((uint)0x30 + CPM_IRQ_OFFSET)
-#define	SIU_INT_PC14		((uint)0x31 + CPM_IRQ_OFFSET)
-#define	SIU_INT_PC13		((uint)0x32 + CPM_IRQ_OFFSET)
-#define	SIU_INT_PC12		((uint)0x33 + CPM_IRQ_OFFSET)
-#define	SIU_INT_PC11		((uint)0x34 + CPM_IRQ_OFFSET)
-#define	SIU_INT_PC10		((uint)0x35 + CPM_IRQ_OFFSET)
-#define	SIU_INT_PC9		((uint)0x36 + CPM_IRQ_OFFSET)
-#define	SIU_INT_PC8		((uint)0x37 + CPM_IRQ_OFFSET)
-#define	SIU_INT_PC7		((uint)0x38 + CPM_IRQ_OFFSET)
-#define	SIU_INT_PC6		((uint)0x39 + CPM_IRQ_OFFSET)
-#define	SIU_INT_PC5		((uint)0x3a + CPM_IRQ_OFFSET)
-#define	SIU_INT_PC4		((uint)0x3b + CPM_IRQ_OFFSET)
-#define	SIU_INT_PC3		((uint)0x3c + CPM_IRQ_OFFSET)
-#define	SIU_INT_PC2		((uint)0x3d + CPM_IRQ_OFFSET)
-#define	SIU_INT_PC1		((uint)0x3e + CPM_IRQ_OFFSET)
-#define	SIU_INT_PC0		((uint)0x3f + CPM_IRQ_OFFSET)
-
-#endif /* CONFIG_8260 */
-
-#endif /* Whatever way too big #ifdef */
-
-#define NR_MASK_WORDS	((NR_IRQS + 31) / 32)
-/* pedantic: these are long because they are used with set_bit --RR */
-extern unsigned long ppc_cached_irq_mask[NR_MASK_WORDS];
-
-/*
- * Because many systems have two overlapping names spaces for
- * interrupts (ISA and XICS for example), and the ISA interrupts
- * have historically not been easy to renumber, we allow ISA
- * interrupts to take values 0 - 15, and shift up the remaining
- * interrupts by 0x10.
- */
-#define NUM_ISA_INTERRUPTS	0x10
-extern int __irq_offset_value;
-
-static inline int irq_offset_up(int irq)
-{
-	return(irq + __irq_offset_value);
-}
-
-static inline int irq_offset_down(int irq)
-{
-	return(irq - __irq_offset_value);
-}
-
-static inline int irq_offset_value(void)
-{
-	return __irq_offset_value;
-}
-
-#ifdef __DO_IRQ_CANON
-extern int ppc_do_canonicalize_irqs;
-#else
-#define ppc_do_canonicalize_irqs	0
-#endif
-
-static __inline__ int irq_canonicalize(int irq)
-{
-	if (ppc_do_canonicalize_irqs && irq == 2)
-		irq = 9;
-	return irq;
-}
-#endif /* CONFIG_PPC_MERGE */
-
-extern int distribute_irqs;
-
-struct irqaction;
-struct pt_regs;
-
-#define __ARCH_HAS_DO_SOFTIRQ
-
-#if defined(CONFIG_BOOKE) || defined(CONFIG_40x)
-/*
- * Per-cpu stacks for handling critical, debug and machine check
- * level interrupts.
- */
-extern struct thread_info *critirq_ctx[NR_CPUS];
-extern struct thread_info *dbgirq_ctx[NR_CPUS];
-extern struct thread_info *mcheckirq_ctx[NR_CPUS];
-extern void exc_lvl_ctx_init(void);
-#else
-#define exc_lvl_ctx_init()
-#endif
-
-#ifdef CONFIG_IRQSTACKS
-/*
- * Per-cpu stacks for handling hard and soft interrupts.
- */
-extern struct thread_info *hardirq_ctx[NR_CPUS];
-extern struct thread_info *softirq_ctx[NR_CPUS];
-
-extern void irq_ctx_init(void);
-extern void call_do_softirq(struct thread_info *tp);
-extern int call_handle_irq(int irq, void *p1,
-			   struct thread_info *tp, void *func);
-#else
-#define irq_ctx_init()
-
-#endif /* CONFIG_IRQSTACKS */
-
-extern void do_IRQ(struct pt_regs *regs);
-
-#endif /* _ASM_IRQ_H */
-#endif /* __KERNEL__ */
diff --git a/include/asm-powerpc/irqflags.h b/include/asm-powerpc/irqflags.h
deleted file mode 100644
index cc6fdba33660..000000000000
--- a/include/asm-powerpc/irqflags.h
+++ /dev/null
@@ -1,44 +0,0 @@
-/*
- * include/asm-powerpc/irqflags.h
- *
- * IRQ flags handling
- */
-#ifndef _ASM_IRQFLAGS_H
-#define _ASM_IRQFLAGS_H
-
-#ifndef __ASSEMBLY__
-/*
- * Get definitions for raw_local_save_flags(x), etc.
- */
-#include <asm-powerpc/hw_irq.h>
-
-#else
-#ifdef CONFIG_TRACE_IRQFLAGS
-/*
- * Most of the CPU's IRQ-state tracing is done from assembly code; we
- * have to call a C function so call a wrapper that saves all the
- * C-clobbered registers.
- */
-#define TRACE_ENABLE_INTS	bl .trace_hardirqs_on
-#define TRACE_DISABLE_INTS	bl .trace_hardirqs_off
-#define TRACE_AND_RESTORE_IRQ_PARTIAL(en,skip)	\
-	cmpdi	en, 0;				\
-	bne	95f;				\
-	stb	en,PACASOFTIRQEN(r13);		\
-	bl	.trace_hardirqs_off;		\
-	b	skip;				\
-95:	bl	.trace_hardirqs_on;		\
-	li	en,1;
-#define TRACE_AND_RESTORE_IRQ(en)		\
-	TRACE_AND_RESTORE_IRQ_PARTIAL(en,96f);	\
-96:	stb	en,PACASOFTIRQEN(r13)
-#else
-#define TRACE_ENABLE_INTS
-#define TRACE_DISABLE_INTS
-#define TRACE_AND_RESTORE_IRQ_PARTIAL(en,skip)
-#define TRACE_AND_RESTORE_IRQ(en)		\
-	stb	en,PACASOFTIRQEN(r13)
-#endif
-#endif
-
-#endif
diff --git a/include/asm-powerpc/kexec.h b/include/asm-powerpc/kexec.h
deleted file mode 100644
index acdcdc66f1b6..000000000000
--- a/include/asm-powerpc/kexec.h
+++ /dev/null
@@ -1,160 +0,0 @@
-#ifndef _ASM_POWERPC_KEXEC_H
-#define _ASM_POWERPC_KEXEC_H
-#ifdef __KERNEL__
-
-/*
- * Maximum page that is mapped directly into kernel memory.
- * XXX: Since we copy virt we can use any page we allocate
- */
-#define KEXEC_SOURCE_MEMORY_LIMIT (-1UL)
-
-/*
- * Maximum address we can reach in physical address mode.
- * XXX: I want to allow initrd in highmem. Otherwise set to rmo on LPAR.
- */
-#define KEXEC_DESTINATION_MEMORY_LIMIT (-1UL)
-
-/* Maximum address we can use for the control code buffer */
-#ifdef __powerpc64__
-#define KEXEC_CONTROL_MEMORY_LIMIT (-1UL)
-#else
-/* TASK_SIZE, probably left over from use_mm ?? */
-#define KEXEC_CONTROL_MEMORY_LIMIT TASK_SIZE
-#endif
-
-#define KEXEC_CONTROL_CODE_SIZE 4096
-
-/* The native architecture */
-#ifdef __powerpc64__
-#define KEXEC_ARCH KEXEC_ARCH_PPC64
-#else
-#define KEXEC_ARCH KEXEC_ARCH_PPC
-#endif
-
-#ifndef __ASSEMBLY__
-#include <linux/cpumask.h>
-
-typedef void (*crash_shutdown_t)(void);
-
-#ifdef CONFIG_KEXEC
-
-#ifdef __powerpc64__
-/*
- * This function is responsible for capturing register states if coming
- * via panic or invoking dump using sysrq-trigger.
- */
-static inline void crash_setup_regs(struct pt_regs *newregs,
-					struct pt_regs *oldregs)
-{
-	if (oldregs)
-		memcpy(newregs, oldregs, sizeof(*newregs));
-	else {
-		/* FIXME Merge this with xmon_save_regs ?? */
-		unsigned long tmp1, tmp2;
-		__asm__ __volatile__ (
-			"std    0,0(%2)\n"
-			"std    1,8(%2)\n"
-			"std    2,16(%2)\n"
-			"std    3,24(%2)\n"
-			"std    4,32(%2)\n"
-			"std    5,40(%2)\n"
-			"std    6,48(%2)\n"
-			"std    7,56(%2)\n"
-			"std    8,64(%2)\n"
-			"std    9,72(%2)\n"
-			"std    10,80(%2)\n"
-			"std    11,88(%2)\n"
-			"std    12,96(%2)\n"
-			"std    13,104(%2)\n"
-			"std    14,112(%2)\n"
-			"std    15,120(%2)\n"
-			"std    16,128(%2)\n"
-			"std    17,136(%2)\n"
-			"std    18,144(%2)\n"
-			"std    19,152(%2)\n"
-			"std    20,160(%2)\n"
-			"std    21,168(%2)\n"
-			"std    22,176(%2)\n"
-			"std    23,184(%2)\n"
-			"std    24,192(%2)\n"
-			"std    25,200(%2)\n"
-			"std    26,208(%2)\n"
-			"std    27,216(%2)\n"
-			"std    28,224(%2)\n"
-			"std    29,232(%2)\n"
-			"std    30,240(%2)\n"
-			"std    31,248(%2)\n"
-			"mfmsr  %0\n"
-			"std    %0, 264(%2)\n"
-			"mfctr  %0\n"
-			"std    %0, 280(%2)\n"
-			"mflr   %0\n"
-			"std    %0, 288(%2)\n"
-			"bl     1f\n"
-		"1:     mflr   %1\n"
-			"std    %1, 256(%2)\n"
-			"mtlr   %0\n"
-			"mfxer  %0\n"
-			"std    %0, 296(%2)\n"
-			: "=&r" (tmp1), "=&r" (tmp2)
-			: "b" (newregs)
-			: "memory");
-	}
-}
-#else
-/*
- * Provide a dummy definition to avoid build failures. Will remain
- * empty till crash dump support is enabled.
- */
-static inline void crash_setup_regs(struct pt_regs *newregs,
-					struct pt_regs *oldregs) { }
-#endif /* !__powerpc64 __ */
-
-extern void kexec_smp_wait(void);	/* get and clear naca physid, wait for
-					  master to copy new code to 0 */
-extern int crashing_cpu;
-extern void crash_send_ipi(void (*crash_ipi_callback)(struct pt_regs *));
-extern cpumask_t cpus_in_sr;
-static inline int kexec_sr_activated(int cpu)
-{
-	return cpu_isset(cpu,cpus_in_sr);
-}
-
-struct kimage;
-struct pt_regs;
-extern void default_machine_kexec(struct kimage *image);
-extern int default_machine_kexec_prepare(struct kimage *image);
-extern void default_machine_crash_shutdown(struct pt_regs *regs);
-extern int crash_shutdown_register(crash_shutdown_t handler);
-extern int crash_shutdown_unregister(crash_shutdown_t handler);
-
-extern void machine_kexec_simple(struct kimage *image);
-extern void crash_kexec_secondary(struct pt_regs *regs);
-extern int overlaps_crashkernel(unsigned long start, unsigned long size);
-extern void reserve_crashkernel(void);
-
-#else /* !CONFIG_KEXEC */
-static inline int kexec_sr_activated(int cpu) { return 0; }
-static inline void crash_kexec_secondary(struct pt_regs *regs) { }
-
-static inline int overlaps_crashkernel(unsigned long start, unsigned long size)
-{
-	return 0;
-}
-
-static inline void reserve_crashkernel(void) { ; }
-
-static inline int crash_shutdown_register(crash_shutdown_t handler)
-{
-	return 0;
-}
-
-static inline int crash_shutdown_unregister(crash_shutdown_t handler)
-{
-	return 0;
-}
-
-#endif /* CONFIG_KEXEC */
-#endif /* ! __ASSEMBLY__ */
-#endif /* __KERNEL__ */
-#endif /* _ASM_POWERPC_KEXEC_H */
diff --git a/include/asm-powerpc/kgdb.h b/include/asm-powerpc/kgdb.h
deleted file mode 100644
index 1399caf719ae..000000000000
--- a/include/asm-powerpc/kgdb.h
+++ /dev/null
@@ -1,65 +0,0 @@
-/*
- * include/asm-powerpc/kgdb.h
- *
- * The PowerPC (32/64) specific defines / externs for KGDB.  Based on
- * the previous 32bit and 64bit specific files, which had the following
- * copyrights:
- *
- * PPC64 Mods (C) 2005 Frank Rowand (frowand@mvista.com)
- * PPC Mods (C) 2004 Tom Rini (trini@mvista.com)
- * PPC Mods (C) 2003 John Whitney (john.whitney@timesys.com)
- * PPC Mods (C) 1998 Michael Tesch (tesch@cs.wisc.edu)
- *
- *
- * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
- * Author: Tom Rini <trini@kernel.crashing.org>
- *
- * 2006 (c) MontaVista Software, Inc. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-#ifdef __KERNEL__
-#ifndef __POWERPC_KGDB_H__
-#define __POWERPC_KGDB_H__
-
-#ifndef __ASSEMBLY__
-
-#define BREAK_INSTR_SIZE	4
-#define BUFMAX			((NUMREGBYTES * 2) + 512)
-#define OUTBUFMAX		((NUMREGBYTES * 2) + 512)
-static inline void arch_kgdb_breakpoint(void)
-{
-	asm(".long 0x7d821008"); /* twge r2, r2 */
-}
-#define CACHE_FLUSH_IS_SAFE	1
-
-/* The number bytes of registers we have to save depends on a few
- * things.  For 64bit we default to not including vector registers and
- * vector state registers. */
-#ifdef CONFIG_PPC64
-/*
- * 64 bit (8 byte) registers:
- *   32 gpr, 32 fpr, nip, msr, link, ctr
- * 32 bit (4 byte) registers:
- *   ccr, xer, fpscr
- */
-#define NUMREGBYTES		((68 * 8) + (3 * 4))
-#define NUMCRITREGBYTES		184
-#else /* CONFIG_PPC32 */
-/* On non-E500 family PPC32 we determine the size by picking the last
- * register we need, but on E500 we skip sections so we list what we
- * need to store, and add it up. */
-#ifndef CONFIG_E500
-#define MAXREG			(PT_FPSCR+1)
-#else
-/* 32 GPRs (8 bytes), nip, msr, ccr, link, ctr, xer, acc (8 bytes), spefscr*/
-#define MAXREG                 ((32*2)+6+2+1)
-#endif
-#define NUMREGBYTES		(MAXREG * sizeof(int))
-/* CR/LR, R1, R2, R13-R31 inclusive. */
-#define NUMCRITREGBYTES		(23 * sizeof(int))
-#endif /* 32/64 */
-#endif /* !(__ASSEMBLY__) */
-#endif /* !__POWERPC_KGDB_H__ */
-#endif /* __KERNEL__ */
diff --git a/include/asm-powerpc/mmu_context.h b/include/asm-powerpc/mmu_context.h
deleted file mode 100644
index 9102b8bf0ead..000000000000
--- a/include/asm-powerpc/mmu_context.h
+++ /dev/null
@@ -1,280 +0,0 @@
-#ifndef __ASM_POWERPC_MMU_CONTEXT_H
-#define __ASM_POWERPC_MMU_CONTEXT_H
-#ifdef __KERNEL__
-
-#include <asm/mmu.h>	
-#include <asm/cputable.h>
-#include <asm-generic/mm_hooks.h>
-
-#ifndef CONFIG_PPC64
-#include <asm/atomic.h>
-#include <linux/bitops.h>
-
-/*
- * On 32-bit PowerPC 6xx/7xx/7xxx CPUs, we use a set of 16 VSIDs
- * (virtual segment identifiers) for each context.  Although the
- * hardware supports 24-bit VSIDs, and thus >1 million contexts,
- * we only use 32,768 of them.  That is ample, since there can be
- * at most around 30,000 tasks in the system anyway, and it means
- * that we can use a bitmap to indicate which contexts are in use.
- * Using a bitmap means that we entirely avoid all of the problems
- * that we used to have when the context number overflowed,
- * particularly on SMP systems.
- *  -- paulus.
- */
-
-/*
- * This function defines the mapping from contexts to VSIDs (virtual
- * segment IDs).  We use a skew on both the context and the high 4 bits
- * of the 32-bit virtual address (the "effective segment ID") in order
- * to spread out the entries in the MMU hash table.  Note, if this
- * function is changed then arch/ppc/mm/hashtable.S will have to be
- * changed to correspond.
- */
-#define CTX_TO_VSID(ctx, va)	(((ctx) * (897 * 16) + ((va) >> 28) * 0x111) \
-				 & 0xffffff)
-
-/*
-   The MPC8xx has only 16 contexts.  We rotate through them on each
-   task switch.  A better way would be to keep track of tasks that
-   own contexts, and implement an LRU usage.  That way very active
-   tasks don't always have to pay the TLB reload overhead.  The
-   kernel pages are mapped shared, so the kernel can run on behalf
-   of any task that makes a kernel entry.  Shared does not mean they
-   are not protected, just that the ASID comparison is not performed.
-        -- Dan
-
-   The IBM4xx has 256 contexts, so we can just rotate through these
-   as a way of "switching" contexts.  If the TID of the TLB is zero,
-   the PID/TID comparison is disabled, so we can use a TID of zero
-   to represent all kernel pages as shared among all contexts.
-   	-- Dan
- */
-
-static inline void enter_lazy_tlb(struct mm_struct *mm, struct task_struct *tsk)
-{
-}
-
-#ifdef CONFIG_8xx
-#define NO_CONTEXT      	16
-#define LAST_CONTEXT    	15
-#define FIRST_CONTEXT    	0
-
-#elif defined(CONFIG_4xx)
-#define NO_CONTEXT      	256
-#define LAST_CONTEXT    	255
-#define FIRST_CONTEXT    	1
-
-#elif defined(CONFIG_E200) || defined(CONFIG_E500)
-#define NO_CONTEXT      	256
-#define LAST_CONTEXT    	255
-#define FIRST_CONTEXT    	1
-
-#else
-
-/* PPC 6xx, 7xx CPUs */
-#define NO_CONTEXT      	((unsigned long) -1)
-#define LAST_CONTEXT    	32767
-#define FIRST_CONTEXT    	1
-#endif
-
-/*
- * Set the current MMU context.
- * On 32-bit PowerPCs (other than the 8xx embedded chips), this is done by
- * loading up the segment registers for the user part of the address space.
- *
- * Since the PGD is immediately available, it is much faster to simply
- * pass this along as a second parameter, which is required for 8xx and
- * can be used for debugging on all processors (if you happen to have
- * an Abatron).
- */
-extern void set_context(unsigned long contextid, pgd_t *pgd);
-
-/*
- * Bitmap of contexts in use.
- * The size of this bitmap is LAST_CONTEXT + 1 bits.
- */
-extern unsigned long context_map[];
-
-/*
- * This caches the next context number that we expect to be free.
- * Its use is an optimization only, we can't rely on this context
- * number to be free, but it usually will be.
- */
-extern unsigned long next_mmu_context;
-
-/*
- * If we don't have sufficient contexts to give one to every task
- * that could be in the system, we need to be able to steal contexts.
- * These variables support that.
- */
-#if LAST_CONTEXT < 30000
-#define FEW_CONTEXTS	1
-extern atomic_t nr_free_contexts;
-extern struct mm_struct *context_mm[LAST_CONTEXT+1];
-extern void steal_context(void);
-#endif
-
-/*
- * Get a new mmu context for the address space described by `mm'.
- */
-static inline void get_mmu_context(struct mm_struct *mm)
-{
-	unsigned long ctx;
-
-	if (mm->context.id != NO_CONTEXT)
-		return;
-#ifdef FEW_CONTEXTS
-	while (atomic_dec_if_positive(&nr_free_contexts) < 0)
-		steal_context();
-#endif
-	ctx = next_mmu_context;
-	while (test_and_set_bit(ctx, context_map)) {
-		ctx = find_next_zero_bit(context_map, LAST_CONTEXT+1, ctx);
-		if (ctx > LAST_CONTEXT)
-			ctx = 0;
-	}
-	next_mmu_context = (ctx + 1) & LAST_CONTEXT;
-	mm->context.id = ctx;
-#ifdef FEW_CONTEXTS
-	context_mm[ctx] = mm;
-#endif
-}
-
-/*
- * Set up the context for a new address space.
- */
-static inline int init_new_context(struct task_struct *t, struct mm_struct *mm)
-{
-	mm->context.id = NO_CONTEXT;
-	mm->context.vdso_base = 0;
-	return 0;
-}
-
-/*
- * We're finished using the context for an address space.
- */
-static inline void destroy_context(struct mm_struct *mm)
-{
-	preempt_disable();
-	if (mm->context.id != NO_CONTEXT) {
-		clear_bit(mm->context.id, context_map);
-		mm->context.id = NO_CONTEXT;
-#ifdef FEW_CONTEXTS
-		atomic_inc(&nr_free_contexts);
-#endif
-	}
-	preempt_enable();
-}
-
-static inline void switch_mm(struct mm_struct *prev, struct mm_struct *next,
-			     struct task_struct *tsk)
-{
-#ifdef CONFIG_ALTIVEC
-	if (cpu_has_feature(CPU_FTR_ALTIVEC))
-	asm volatile ("dssall;\n"
-#ifndef CONFIG_POWER4
-	 "sync;\n" /* G4 needs a sync here, G5 apparently not */
-#endif
-	 : : );
-#endif /* CONFIG_ALTIVEC */
-
-	tsk->thread.pgdir = next->pgd;
-
-	/* No need to flush userspace segments if the mm doesnt change */
-	if (prev == next)
-		return;
-
-	/* Setup new userspace context */
-	get_mmu_context(next);
-	set_context(next->context.id, next->pgd);
-}
-
-#define deactivate_mm(tsk,mm)	do { } while (0)
-
-/*
- * After we have set current->mm to a new value, this activates
- * the context for the new mm so we see the new mappings.
- */
-#define activate_mm(active_mm, mm)   switch_mm(active_mm, mm, current)
-
-extern void mmu_context_init(void);
-
-
-#else
-
-#include <linux/kernel.h>	
-#include <linux/mm.h>	
-#include <linux/sched.h>
-
-/*
- * Copyright (C) 2001 PPC 64 Team, IBM Corp
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-
-static inline void enter_lazy_tlb(struct mm_struct *mm,
-				  struct task_struct *tsk)
-{
-}
-
-/*
- * The proto-VSID space has 2^35 - 1 segments available for user mappings.
- * Each segment contains 2^28 bytes.  Each context maps 2^44 bytes,
- * so we can support 2^19-1 contexts (19 == 35 + 28 - 44).
- */
-#define NO_CONTEXT	0
-#define MAX_CONTEXT	((1UL << 19) - 1)
-
-extern int init_new_context(struct task_struct *tsk, struct mm_struct *mm);
-extern void destroy_context(struct mm_struct *mm);
-
-extern void switch_stab(struct task_struct *tsk, struct mm_struct *mm);
-extern void switch_slb(struct task_struct *tsk, struct mm_struct *mm);
-
-/*
- * switch_mm is the entry point called from the architecture independent
- * code in kernel/sched.c
- */
-static inline void switch_mm(struct mm_struct *prev, struct mm_struct *next,
-			     struct task_struct *tsk)
-{
-	if (!cpu_isset(smp_processor_id(), next->cpu_vm_mask))
-		cpu_set(smp_processor_id(), next->cpu_vm_mask);
-
-	/* No need to flush userspace segments if the mm doesnt change */
-	if (prev == next)
-		return;
-
-#ifdef CONFIG_ALTIVEC
-	if (cpu_has_feature(CPU_FTR_ALTIVEC))
-		asm volatile ("dssall");
-#endif /* CONFIG_ALTIVEC */
-
-	if (cpu_has_feature(CPU_FTR_SLB))
-		switch_slb(tsk, next);
-	else
-		switch_stab(tsk, next);
-}
-
-#define deactivate_mm(tsk,mm)	do { } while (0)
-
-/*
- * After we have set current->mm to a new value, this activates
- * the context for the new mm so we see the new mappings.
- */
-static inline void activate_mm(struct mm_struct *prev, struct mm_struct *next)
-{
-	unsigned long flags;
-
-	local_irq_save(flags);
-	switch_mm(prev, next, current);
-	local_irq_restore(flags);
-}
-
-#endif /* CONFIG_PPC64 */
-#endif /* __KERNEL__ */
-#endif /* __ASM_POWERPC_MMU_CONTEXT_H */
diff --git a/include/asm-powerpc/namei.h b/include/asm-powerpc/namei.h
deleted file mode 100644
index 657443474a6a..000000000000
--- a/include/asm-powerpc/namei.h
+++ /dev/null
@@ -1,20 +0,0 @@
-#ifndef _ASM_POWERPC_NAMEI_H
-#define _ASM_POWERPC_NAMEI_H
-
-#ifdef __KERNEL__
-
-/*
- * Adapted from include/asm-alpha/namei.h
- *
- * Included from fs/namei.c
- */
-
-/* This dummy routine maybe changed to something useful
- * for /usr/gnemul/ emulation stuff.
- * Look at asm-sparc/namei.h for details.
- */
-
-#define __emul_prefix() NULL
-
-#endif	/* __KERNEL__ */
-#endif	/* _ASM_POWERPC_NAMEI_H */
diff --git a/include/asm-powerpc/pgtable.h b/include/asm-powerpc/pgtable.h
deleted file mode 100644
index d18ffe7bc7c4..000000000000
--- a/include/asm-powerpc/pgtable.h
+++ /dev/null
@@ -1,44 +0,0 @@
-#ifndef _ASM_POWERPC_PGTABLE_H
-#define _ASM_POWERPC_PGTABLE_H
-#ifdef __KERNEL__
-
-#ifndef __ASSEMBLY__
-#include <asm/processor.h>		/* For TASK_SIZE */
-#include <asm/mmu.h>
-#include <asm/page.h>
-struct mm_struct;
-#endif /* !__ASSEMBLY__ */
-
-#if defined(CONFIG_PPC64)
-#  include <asm/pgtable-ppc64.h>
-#else
-#  include <asm/pgtable-ppc32.h>
-#endif
-
-#ifndef __ASSEMBLY__
-/*
- * ZERO_PAGE is a global shared page that is always zero: used
- * for zero-mapped memory areas etc..
- */
-extern unsigned long empty_zero_page[];
-#define ZERO_PAGE(vaddr) (virt_to_page(empty_zero_page))
-
-extern pgd_t swapper_pg_dir[];
-
-extern void paging_init(void);
-
-/*
- * kern_addr_valid is intended to indicate whether an address is a valid
- * kernel address.  Most 32-bit archs define it as always true (like this)
- * but most 64-bit archs actually perform a test.  What should we do here?
- */
-#define kern_addr_valid(addr)	(1)
-
-#define io_remap_pfn_range(vma, vaddr, pfn, size, prot)		\
-		remap_pfn_range(vma, vaddr, pfn, size, prot)
-
-#include <asm-generic/pgtable.h>
-#endif /* __ASSEMBLY__ */
-
-#endif /* __KERNEL__ */
-#endif /* _ASM_POWERPC_PGTABLE_H */
diff --git a/include/asm-powerpc/ptrace.h b/include/asm-powerpc/ptrace.h
deleted file mode 100644
index 3d6e31024e56..000000000000
--- a/include/asm-powerpc/ptrace.h
+++ /dev/null
@@ -1,292 +0,0 @@
-#ifndef _ASM_POWERPC_PTRACE_H
-#define _ASM_POWERPC_PTRACE_H
-
-/*
- * Copyright (C) 2001 PPC64 Team, IBM Corp
- *
- * This struct defines the way the registers are stored on the
- * kernel stack during a system call or other kernel entry.
- *
- * this should only contain volatile regs
- * since we can keep non-volatile in the thread_struct
- * should set this up when only volatiles are saved
- * by intr code.
- *
- * Since this is going on the stack, *CARE MUST BE TAKEN* to insure
- * that the overall structure is a multiple of 16 bytes in length.
- *
- * Note that the offsets of the fields in this struct correspond with
- * the PT_* values below.  This simplifies arch/powerpc/kernel/ptrace.c.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-
-#ifndef __ASSEMBLY__
-
-struct pt_regs {
-	unsigned long gpr[32];
-	unsigned long nip;
-	unsigned long msr;
-	unsigned long orig_gpr3;	/* Used for restarting system calls */
-	unsigned long ctr;
-	unsigned long link;
-	unsigned long xer;
-	unsigned long ccr;
-#ifdef __powerpc64__
-	unsigned long softe;		/* Soft enabled/disabled */
-#else
-	unsigned long mq;		/* 601 only (not used at present) */
-					/* Used on APUS to hold IPL value. */
-#endif
-	unsigned long trap;		/* Reason for being here */
-	/* N.B. for critical exceptions on 4xx, the dar and dsisr
-	   fields are overloaded to hold srr0 and srr1. */
-	unsigned long dar;		/* Fault registers */
-	unsigned long dsisr;		/* on 4xx/Book-E used for ESR */
-	unsigned long result;		/* Result of a system call */
-};
-
-#endif /* __ASSEMBLY__ */
-
-#ifdef __KERNEL__
-
-#ifdef __powerpc64__
-
-#define __ARCH_WANT_COMPAT_SYS_PTRACE
-
-#define STACK_FRAME_OVERHEAD	112	/* size of minimum stack frame */
-#define STACK_FRAME_LR_SAVE	2	/* Location of LR in stack frame */
-#define STACK_FRAME_REGS_MARKER	ASM_CONST(0x7265677368657265)
-#define STACK_INT_FRAME_SIZE	(sizeof(struct pt_regs) + \
-					STACK_FRAME_OVERHEAD + 288)
-#define STACK_FRAME_MARKER	12
-
-/* Size of dummy stack frame allocated when calling signal handler. */
-#define __SIGNAL_FRAMESIZE	128
-#define __SIGNAL_FRAMESIZE32	64
-
-#else /* __powerpc64__ */
-
-#define STACK_FRAME_OVERHEAD	16	/* size of minimum stack frame */
-#define STACK_FRAME_LR_SAVE	1	/* Location of LR in stack frame */
-#define STACK_FRAME_REGS_MARKER	ASM_CONST(0x72656773)
-#define STACK_INT_FRAME_SIZE	(sizeof(struct pt_regs) + STACK_FRAME_OVERHEAD)
-#define STACK_FRAME_MARKER	2
-
-/* Size of stack frame allocated when calling signal handler. */
-#define __SIGNAL_FRAMESIZE	64
-
-#endif /* __powerpc64__ */
-
-#ifndef __ASSEMBLY__
-
-#define instruction_pointer(regs) ((regs)->nip)
-#define regs_return_value(regs) ((regs)->gpr[3])
-
-#ifdef CONFIG_SMP
-extern unsigned long profile_pc(struct pt_regs *regs);
-#else
-#define profile_pc(regs) instruction_pointer(regs)
-#endif
-
-#ifdef __powerpc64__
-#define user_mode(regs) ((((regs)->msr) >> MSR_PR_LG) & 0x1)
-#else
-#define user_mode(regs) (((regs)->msr & MSR_PR) != 0)
-#endif
-
-#define force_successful_syscall_return()   \
-	do { \
-		set_thread_flag(TIF_NOERROR); \
-	} while(0)
-
-struct task_struct;
-extern unsigned long ptrace_get_reg(struct task_struct *task, int regno);
-extern int ptrace_put_reg(struct task_struct *task, int regno,
-			  unsigned long data);
-
-/*
- * We use the least-significant bit of the trap field to indicate
- * whether we have saved the full set of registers, or only a
- * partial set.  A 1 there means the partial set.
- * On 4xx we use the next bit to indicate whether the exception
- * is a critical exception (1 means it is).
- */
-#define FULL_REGS(regs)		(((regs)->trap & 1) == 0)
-#ifndef __powerpc64__
-#define IS_CRITICAL_EXC(regs)	(((regs)->trap & 2) != 0)
-#define IS_MCHECK_EXC(regs)	(((regs)->trap & 4) != 0)
-#define IS_DEBUG_EXC(regs)	(((regs)->trap & 8) != 0)
-#endif /* ! __powerpc64__ */
-#define TRAP(regs)		((regs)->trap & ~0xF)
-#ifdef __powerpc64__
-#define CHECK_FULL_REGS(regs)	BUG_ON(regs->trap & 1)
-#else
-#define CHECK_FULL_REGS(regs)						      \
-do {									      \
-	if ((regs)->trap & 1)						      \
-		printk(KERN_CRIT "%s: partial register set\n", __FUNCTION__); \
-} while (0)
-#endif /* __powerpc64__ */
-
-/*
- * These are defined as per linux/ptrace.h, which see.
- */
-#define arch_has_single_step()	(1)
-extern void user_enable_single_step(struct task_struct *);
-extern void user_disable_single_step(struct task_struct *);
-
-#endif /* __ASSEMBLY__ */
-
-#endif /* __KERNEL__ */
-
-/*
- * Offsets used by 'ptrace' system call interface.
- * These can't be changed without breaking binary compatibility
- * with MkLinux, etc.
- */
-#define PT_R0	0
-#define PT_R1	1
-#define PT_R2	2
-#define PT_R3	3
-#define PT_R4	4
-#define PT_R5	5
-#define PT_R6	6
-#define PT_R7	7
-#define PT_R8	8
-#define PT_R9	9
-#define PT_R10	10
-#define PT_R11	11
-#define PT_R12	12
-#define PT_R13	13
-#define PT_R14	14
-#define PT_R15	15
-#define PT_R16	16
-#define PT_R17	17
-#define PT_R18	18
-#define PT_R19	19
-#define PT_R20	20
-#define PT_R21	21
-#define PT_R22	22
-#define PT_R23	23
-#define PT_R24	24
-#define PT_R25	25
-#define PT_R26	26
-#define PT_R27	27
-#define PT_R28	28
-#define PT_R29	29
-#define PT_R30	30
-#define PT_R31	31
-
-#define PT_NIP	32
-#define PT_MSR	33
-#define PT_ORIG_R3 34
-#define PT_CTR	35
-#define PT_LNK	36
-#define PT_XER	37
-#define PT_CCR	38
-#ifndef __powerpc64__
-#define PT_MQ	39
-#else
-#define PT_SOFTE 39
-#endif
-#define PT_TRAP	40
-#define PT_DAR	41
-#define PT_DSISR 42
-#define PT_RESULT 43
-#define PT_REGS_COUNT 44
-
-#define PT_FPR0	48	/* each FP reg occupies 2 slots in this space */
-
-#ifndef __powerpc64__
-
-#define PT_FPR31 (PT_FPR0 + 2*31)
-#define PT_FPSCR (PT_FPR0 + 2*32 + 1)
-
-#else /* __powerpc64__ */
-
-#define PT_FPSCR (PT_FPR0 + 32)	/* each FP reg occupies 1 slot in 64-bit space */
-
-#ifdef __KERNEL__
-#define PT_FPSCR32 (PT_FPR0 + 2*32 + 1)	/* each FP reg occupies 2 32-bit userspace slots */
-#endif
-
-#define PT_VR0 82	/* each Vector reg occupies 2 slots in 64-bit */
-#define PT_VSCR (PT_VR0 + 32*2 + 1)
-#define PT_VRSAVE (PT_VR0 + 33*2)
-
-#ifdef __KERNEL__
-#define PT_VR0_32 164	/* each Vector reg occupies 4 slots in 32-bit */
-#define PT_VSCR_32 (PT_VR0 + 32*4 + 3)
-#define PT_VRSAVE_32 (PT_VR0 + 33*4)
-#endif
-
-/*
- * Only store first 32 VSRs here. The second 32 VSRs in VR0-31
- */
-#define PT_VSR0 150	/* each VSR reg occupies 2 slots in 64-bit */
-#define PT_VSR31 (PT_VSR0 + 2*31)
-#ifdef __KERNEL__
-#define PT_VSR0_32 300 	/* each VSR reg occupies 4 slots in 32-bit */
-#endif
-#endif /* __powerpc64__ */
-
-/*
- * Get/set all the altivec registers vr0..vr31, vscr, vrsave, in one go.
- * The transfer totals 34 quadword.  Quadwords 0-31 contain the
- * corresponding vector registers.  Quadword 32 contains the vscr as the
- * last word (offset 12) within that quadword.  Quadword 33 contains the
- * vrsave as the first word (offset 0) within the quadword.
- *
- * This definition of the VMX state is compatible with the current PPC32
- * ptrace interface.  This allows signal handling and ptrace to use the same
- * structures.  This also simplifies the implementation of a bi-arch
- * (combined (32- and 64-bit) gdb.
- */
-#define PTRACE_GETVRREGS	18
-#define PTRACE_SETVRREGS	19
-
-/* Get/set all the upper 32-bits of the SPE registers, accumulator, and
- * spefscr, in one go */
-#define PTRACE_GETEVRREGS	20
-#define PTRACE_SETEVRREGS	21
-
-/* Get the first 32 128bit VSX registers */
-#define PTRACE_GETVSRREGS	27
-#define PTRACE_SETVSRREGS	28
-
-/*
- * Get or set a debug register. The first 16 are DABR registers and the
- * second 16 are IABR registers.
- */
-#define PTRACE_GET_DEBUGREG	25
-#define PTRACE_SET_DEBUGREG	26
-
-/* (new) PTRACE requests using the same numbers as x86 and the same
- * argument ordering. Additionally, they support more registers too
- */
-#define PTRACE_GETREGS            12
-#define PTRACE_SETREGS            13
-#define PTRACE_GETFPREGS          14
-#define PTRACE_SETFPREGS          15
-#define PTRACE_GETREGS64	  22
-#define PTRACE_SETREGS64	  23
-
-/* (old) PTRACE requests with inverted arguments */
-#define PPC_PTRACE_GETREGS	0x99	/* Get GPRs 0 - 31 */
-#define PPC_PTRACE_SETREGS	0x98	/* Set GPRs 0 - 31 */
-#define PPC_PTRACE_GETFPREGS	0x97	/* Get FPRs 0 - 31 */
-#define PPC_PTRACE_SETFPREGS	0x96	/* Set FPRs 0 - 31 */
-
-/* Calls to trace a 64bit program from a 32bit program */
-#define PPC_PTRACE_PEEKTEXT_3264 0x95
-#define PPC_PTRACE_PEEKDATA_3264 0x94
-#define PPC_PTRACE_POKETEXT_3264 0x93
-#define PPC_PTRACE_POKEDATA_3264 0x92
-#define PPC_PTRACE_PEEKUSR_3264  0x91
-#define PPC_PTRACE_POKEUSR_3264  0x90
-
-#endif /* _ASM_POWERPC_PTRACE_H */
diff --git a/include/asm-powerpc/rwsem.h b/include/asm-powerpc/rwsem.h
deleted file mode 100644
index a6cc93b78b98..000000000000
--- a/include/asm-powerpc/rwsem.h
+++ /dev/null
@@ -1,173 +0,0 @@
-#ifndef _ASM_POWERPC_RWSEM_H
-#define _ASM_POWERPC_RWSEM_H
-
-#ifndef _LINUX_RWSEM_H
-#error "Please don't include <asm/rwsem.h> directly, use <linux/rwsem.h> instead."
-#endif
-
-#ifdef __KERNEL__
-
-/*
- * include/asm-powerpc/rwsem.h: R/W semaphores for PPC using the stuff
- * in lib/rwsem.c.  Adapted largely from include/asm-i386/rwsem.h
- * by Paul Mackerras <paulus@samba.org>.
- */
-
-#include <linux/list.h>
-#include <linux/spinlock.h>
-#include <asm/atomic.h>
-#include <asm/system.h>
-
-/*
- * the semaphore definition
- */
-struct rw_semaphore {
-	/* XXX this should be able to be an atomic_t  -- paulus */
-	signed int		count;
-#define RWSEM_UNLOCKED_VALUE		0x00000000
-#define RWSEM_ACTIVE_BIAS		0x00000001
-#define RWSEM_ACTIVE_MASK		0x0000ffff
-#define RWSEM_WAITING_BIAS		(-0x00010000)
-#define RWSEM_ACTIVE_READ_BIAS		RWSEM_ACTIVE_BIAS
-#define RWSEM_ACTIVE_WRITE_BIAS		(RWSEM_WAITING_BIAS + RWSEM_ACTIVE_BIAS)
-	spinlock_t		wait_lock;
-	struct list_head	wait_list;
-#ifdef CONFIG_DEBUG_LOCK_ALLOC
-	struct lockdep_map	dep_map;
-#endif
-};
-
-#ifdef CONFIG_DEBUG_LOCK_ALLOC
-# define __RWSEM_DEP_MAP_INIT(lockname) , .dep_map = { .name = #lockname }
-#else
-# define __RWSEM_DEP_MAP_INIT(lockname)
-#endif
-
-#define __RWSEM_INITIALIZER(name) \
-	{ RWSEM_UNLOCKED_VALUE, __SPIN_LOCK_UNLOCKED((name).wait_lock), \
-	  LIST_HEAD_INIT((name).wait_list) __RWSEM_DEP_MAP_INIT(name) }
-
-#define DECLARE_RWSEM(name)		\
-	struct rw_semaphore name = __RWSEM_INITIALIZER(name)
-
-extern struct rw_semaphore *rwsem_down_read_failed(struct rw_semaphore *sem);
-extern struct rw_semaphore *rwsem_down_write_failed(struct rw_semaphore *sem);
-extern struct rw_semaphore *rwsem_wake(struct rw_semaphore *sem);
-extern struct rw_semaphore *rwsem_downgrade_wake(struct rw_semaphore *sem);
-
-extern void __init_rwsem(struct rw_semaphore *sem, const char *name,
-			 struct lock_class_key *key);
-
-#define init_rwsem(sem)					\
-	do {						\
-		static struct lock_class_key __key;	\
-							\
-		__init_rwsem((sem), #sem, &__key);	\
-	} while (0)
-
-/*
- * lock for reading
- */
-static inline void __down_read(struct rw_semaphore *sem)
-{
-	if (unlikely(atomic_inc_return((atomic_t *)(&sem->count)) <= 0))
-		rwsem_down_read_failed(sem);
-}
-
-static inline int __down_read_trylock(struct rw_semaphore *sem)
-{
-	int tmp;
-
-	while ((tmp = sem->count) >= 0) {
-		if (tmp == cmpxchg(&sem->count, tmp,
-				   tmp + RWSEM_ACTIVE_READ_BIAS)) {
-			return 1;
-		}
-	}
-	return 0;
-}
-
-/*
- * lock for writing
- */
-static inline void __down_write_nested(struct rw_semaphore *sem, int subclass)
-{
-	int tmp;
-
-	tmp = atomic_add_return(RWSEM_ACTIVE_WRITE_BIAS,
-				(atomic_t *)(&sem->count));
-	if (unlikely(tmp != RWSEM_ACTIVE_WRITE_BIAS))
-		rwsem_down_write_failed(sem);
-}
-
-static inline void __down_write(struct rw_semaphore *sem)
-{
-	__down_write_nested(sem, 0);
-}
-
-static inline int __down_write_trylock(struct rw_semaphore *sem)
-{
-	int tmp;
-
-	tmp = cmpxchg(&sem->count, RWSEM_UNLOCKED_VALUE,
-		      RWSEM_ACTIVE_WRITE_BIAS);
-	return tmp == RWSEM_UNLOCKED_VALUE;
-}
-
-/*
- * unlock after reading
- */
-static inline void __up_read(struct rw_semaphore *sem)
-{
-	int tmp;
-
-	tmp = atomic_dec_return((atomic_t *)(&sem->count));
-	if (unlikely(tmp < -1 && (tmp & RWSEM_ACTIVE_MASK) == 0))
-		rwsem_wake(sem);
-}
-
-/*
- * unlock after writing
- */
-static inline void __up_write(struct rw_semaphore *sem)
-{
-	if (unlikely(atomic_sub_return(RWSEM_ACTIVE_WRITE_BIAS,
-			      (atomic_t *)(&sem->count)) < 0))
-		rwsem_wake(sem);
-}
-
-/*
- * implement atomic add functionality
- */
-static inline void rwsem_atomic_add(int delta, struct rw_semaphore *sem)
-{
-	atomic_add(delta, (atomic_t *)(&sem->count));
-}
-
-/*
- * downgrade write lock to read lock
- */
-static inline void __downgrade_write(struct rw_semaphore *sem)
-{
-	int tmp;
-
-	tmp = atomic_add_return(-RWSEM_WAITING_BIAS, (atomic_t *)(&sem->count));
-	if (tmp < 0)
-		rwsem_downgrade_wake(sem);
-}
-
-/*
- * implement exchange and add functionality
- */
-static inline int rwsem_atomic_update(int delta, struct rw_semaphore *sem)
-{
-	return atomic_add_return(delta, (atomic_t *)(&sem->count));
-}
-
-static inline int rwsem_is_locked(struct rw_semaphore *sem)
-{
-	return (sem->count != 0);
-}
-
-#endif	/* __KERNEL__ */
-#endif	/* _ASM_POWERPC_RWSEM_H */
diff --git a/include/asm-powerpc/signal.h b/include/asm-powerpc/signal.h
deleted file mode 100644
index a8c7babf4950..000000000000
--- a/include/asm-powerpc/signal.h
+++ /dev/null
@@ -1,151 +0,0 @@
-#ifndef _ASM_POWERPC_SIGNAL_H
-#define _ASM_POWERPC_SIGNAL_H
-
-#include <linux/types.h>
-
-#define _NSIG		64
-#ifdef __powerpc64__
-#define _NSIG_BPW	64
-#else
-#define _NSIG_BPW	32
-#endif
-#define _NSIG_WORDS	(_NSIG / _NSIG_BPW)
-
-typedef unsigned long old_sigset_t;		/* at least 32 bits */
-
-typedef struct {
-	unsigned long sig[_NSIG_WORDS];
-} sigset_t;
-
-#define SIGHUP		 1
-#define SIGINT		 2
-#define SIGQUIT		 3
-#define SIGILL		 4
-#define SIGTRAP		 5
-#define SIGABRT		 6
-#define SIGIOT		 6
-#define SIGBUS		 7
-#define SIGFPE		 8
-#define SIGKILL		 9
-#define SIGUSR1		10
-#define SIGSEGV		11
-#define SIGUSR2		12
-#define SIGPIPE		13
-#define SIGALRM		14
-#define SIGTERM		15
-#define SIGSTKFLT	16
-#define SIGCHLD		17
-#define SIGCONT		18
-#define SIGSTOP		19
-#define SIGTSTP		20
-#define SIGTTIN		21
-#define SIGTTOU		22
-#define SIGURG		23
-#define SIGXCPU		24
-#define SIGXFSZ		25
-#define SIGVTALRM	26
-#define SIGPROF		27
-#define SIGWINCH	28
-#define SIGIO		29
-#define SIGPOLL		SIGIO
-/*
-#define SIGLOST		29
-*/
-#define SIGPWR		30
-#define SIGSYS		31
-#define	SIGUNUSED	31
-
-/* These should not be considered constants from userland.  */
-#define SIGRTMIN	32
-#define SIGRTMAX	_NSIG
-
-/*
- * SA_FLAGS values:
- *
- * SA_ONSTACK is not currently supported, but will allow sigaltstack(2).
- * SA_RESTART flag to get restarting signals (which were the default long ago)
- * SA_NOCLDSTOP flag to turn off SIGCHLD when children stop.
- * SA_RESETHAND clears the handler when the signal is delivered.
- * SA_NOCLDWAIT flag on SIGCHLD to inhibit zombies.
- * SA_NODEFER prevents the current signal from being masked in the handler.
- *
- * SA_ONESHOT and SA_NOMASK are the historical Linux names for the Single
- * Unix names RESETHAND and NODEFER respectively.
- */
-#define SA_NOCLDSTOP	0x00000001U
-#define SA_NOCLDWAIT	0x00000002U
-#define SA_SIGINFO	0x00000004U
-#define SA_ONSTACK	0x08000000U
-#define SA_RESTART	0x10000000U
-#define SA_NODEFER	0x40000000U
-#define SA_RESETHAND	0x80000000U
-
-#define SA_NOMASK	SA_NODEFER
-#define SA_ONESHOT	SA_RESETHAND
-
-#define SA_RESTORER	0x04000000U
-
-/*
- * sigaltstack controls
- */
-#define SS_ONSTACK	1
-#define SS_DISABLE	2
-
-#define MINSIGSTKSZ	2048
-#define SIGSTKSZ	8192
-
-#include <asm-generic/signal.h>
-
-struct old_sigaction {
-	__sighandler_t sa_handler;
-	old_sigset_t sa_mask;
-	unsigned long sa_flags;
-	__sigrestore_t sa_restorer;
-};
-
-struct sigaction {
-	__sighandler_t sa_handler;
-	unsigned long sa_flags;
-	__sigrestore_t sa_restorer;
-	sigset_t sa_mask;		/* mask last for extensibility */
-};
-
-struct k_sigaction {
-	struct sigaction sa;
-};
-
-typedef struct sigaltstack {
-	void __user *ss_sp;
-	int ss_flags;
-	size_t ss_size;
-} stack_t;
-
-#ifdef __KERNEL__
-struct pt_regs;
-extern int do_signal(sigset_t *oldset, struct pt_regs *regs);
-extern int do_signal32(sigset_t *oldset, struct pt_regs *regs);
-#define ptrace_signal_deliver(regs, cookie) do { } while (0)
-#endif /* __KERNEL__ */
-
-#ifndef __powerpc64__
-/*
- * These are parameters to dbg_sigreturn syscall.  They enable or
- * disable certain debugging things that can be done from signal
- * handlers.  The dbg_sigreturn syscall *must* be called from a
- * SA_SIGINFO signal so the ucontext can be passed to it.  It takes an
- * array of struct sig_dbg_op, which has the debug operations to
- * perform before returning from the signal.
- */
-struct sig_dbg_op {
-	int dbg_type;
-	unsigned long dbg_value;
-};
-
-/* Enable or disable single-stepping.  The value sets the state. */
-#define SIG_DBG_SINGLE_STEPPING		1
-
-/* Enable or disable branch tracing.  The value sets the state. */
-#define SIG_DBG_BRANCH_TRACING		2
-#endif /* ! __powerpc64__ */
-
-#endif /* _ASM_POWERPC_SIGNAL_H */
diff --git a/include/asm-powerpc/smp.h b/include/asm-powerpc/smp.h
deleted file mode 100644
index 416d4c288cea..000000000000
--- a/include/asm-powerpc/smp.h
+++ /dev/null
@@ -1,125 +0,0 @@
-/* 
- * smp.h: PowerPC-specific SMP code.
- *
- * Original was a copy of sparc smp.h.  Now heavily modified
- * for PPC.
- *
- * Copyright (C) 1996 David S. Miller (davem@caip.rutgers.edu)
- * Copyright (C) 1996-2001 Cort Dougan <cort@fsmlabs.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-
-#ifndef _ASM_POWERPC_SMP_H
-#define _ASM_POWERPC_SMP_H
-#ifdef __KERNEL__
-
-#include <linux/threads.h>
-#include <linux/cpumask.h>
-#include <linux/kernel.h>
-
-#ifndef __ASSEMBLY__
-
-#ifdef CONFIG_PPC64
-#include <asm/paca.h>
-#endif
-#include <asm/percpu.h>
-
-extern int boot_cpuid;
-
-extern void cpu_die(void);
-
-#ifdef CONFIG_SMP
-
-extern void smp_send_debugger_break(int cpu);
-extern void smp_message_recv(int);
-
-DECLARE_PER_CPU(unsigned int, pvr);
-
-#ifdef CONFIG_HOTPLUG_CPU
-extern void fixup_irqs(cpumask_t map);
-int generic_cpu_disable(void);
-int generic_cpu_enable(unsigned int cpu);
-void generic_cpu_die(unsigned int cpu);
-void generic_mach_cpu_die(void);
-#endif
-
-#ifdef CONFIG_PPC64
-#define raw_smp_processor_id()	(local_paca->paca_index)
-#define hard_smp_processor_id() (get_paca()->hw_cpu_id)
-#else
-/* 32-bit */
-extern int smp_hw_index[];
-
-#define raw_smp_processor_id()	(current_thread_info()->cpu)
-#define hard_smp_processor_id() 	(smp_hw_index[smp_processor_id()])
-#define get_hard_smp_processor_id(cpu)	(smp_hw_index[(cpu)])
-#define set_hard_smp_processor_id(cpu, phys)\
-					(smp_hw_index[(cpu)] = (phys))
-#endif
-
-DECLARE_PER_CPU(cpumask_t, cpu_sibling_map);
-
-/* Since OpenPIC has only 4 IPIs, we use slightly different message numbers.
- *
- * Make sure this matches openpic_request_IPIs in open_pic.c, or what shows up
- * in /proc/interrupts will be wrong!!! --Troy */
-#define PPC_MSG_CALL_FUNCTION   0
-#define PPC_MSG_RESCHEDULE      1
-#define PPC_MSG_CALL_FUNC_SINGLE	2
-#define PPC_MSG_DEBUGGER_BREAK  3
-
-void smp_init_iSeries(void);
-void smp_init_pSeries(void);
-void smp_init_cell(void);
-void smp_init_celleb(void);
-void smp_setup_cpu_maps(void);
-void smp_setup_cpu_sibling_map(void);
-
-extern int __cpu_disable(void);
-extern void __cpu_die(unsigned int cpu);
-
-#else
-/* for UP */
-#define hard_smp_processor_id()		0
-#define smp_setup_cpu_maps()
-
-#endif /* CONFIG_SMP */
-
-#ifdef CONFIG_PPC64
-#define get_hard_smp_processor_id(CPU) (paca[(CPU)].hw_cpu_id)
-#define set_hard_smp_processor_id(CPU, VAL) \
-	do { (paca[(CPU)].hw_cpu_id = (VAL)); } while (0)
-
-extern void smp_release_cpus(void);
-
-#else
-/* 32-bit */
-#ifndef CONFIG_SMP
-extern int boot_cpuid_phys;
-#define get_hard_smp_processor_id(cpu) 	boot_cpuid_phys
-#define set_hard_smp_processor_id(cpu, phys)
-#endif
-#endif
-
-extern int smt_enabled_at_boot;
-
-extern int smp_mpic_probe(void);
-extern void smp_mpic_setup_cpu(int cpu);
-extern void smp_generic_kick_cpu(int nr);
-
-extern void smp_generic_give_timebase(void);
-extern void smp_generic_take_timebase(void);
-
-extern struct smp_ops_t *smp_ops;
-
-extern void arch_send_call_function_single_ipi(int cpu);
-extern void arch_send_call_function_ipi(cpumask_t mask);
-
-#endif /* __ASSEMBLY__ */
-
-#endif /* __KERNEL__ */
-#endif /* _ASM_POWERPC_SMP_H) */
diff --git a/include/asm-powerpc/syscalls.h b/include/asm-powerpc/syscalls.h
deleted file mode 100644
index 2b8a458f990a..000000000000
--- a/include/asm-powerpc/syscalls.h
+++ /dev/null
@@ -1,51 +0,0 @@
-#ifndef __ASM_POWERPC_SYSCALLS_H
-#define __ASM_POWERPC_SYSCALLS_H
-#ifdef __KERNEL__
-
-#include <linux/compiler.h>
-#include <linux/linkage.h>
-#include <linux/types.h>
-#include <asm/signal.h>
-
-struct new_utsname;
-struct pt_regs;
-struct rtas_args;
-struct sigaction;
-
-asmlinkage unsigned long sys_mmap(unsigned long addr, size_t len,
-		unsigned long prot, unsigned long flags,
-		unsigned long fd, off_t offset);
-asmlinkage unsigned long sys_mmap2(unsigned long addr, size_t len,
-		unsigned long prot, unsigned long flags,
-		unsigned long fd, unsigned long pgoff);
-asmlinkage int sys_execve(unsigned long a0, unsigned long a1,
-		unsigned long a2, unsigned long a3, unsigned long a4,
-		unsigned long a5, struct pt_regs *regs);
-asmlinkage int sys_clone(unsigned long clone_flags, unsigned long usp,
-		int __user *parent_tidp, void __user *child_threadptr,
-		int __user *child_tidp, int p6, struct pt_regs *regs);
-asmlinkage int sys_fork(unsigned long p1, unsigned long p2,
-		unsigned long p3, unsigned long p4, unsigned long p5,
-		unsigned long p6, struct pt_regs *regs);
-asmlinkage int sys_vfork(unsigned long p1, unsigned long p2,
-		unsigned long p3, unsigned long p4, unsigned long p5,
-		unsigned long p6, struct pt_regs *regs);
-asmlinkage long sys_pipe(int __user *fildes);
-asmlinkage long sys_rt_sigaction(int sig,
-		const struct sigaction __user *act,
-		struct sigaction __user *oact, size_t sigsetsize);
-asmlinkage int sys_ipc(uint call, int first, unsigned long second,
-		long third, void __user *ptr, long fifth);
-asmlinkage long ppc64_personality(unsigned long personality);
-asmlinkage int ppc_rtas(struct rtas_args __user *uargs);
-asmlinkage time_t sys64_time(time_t __user * tloc);
-asmlinkage long ppc_newuname(struct new_utsname __user * name);
-
-asmlinkage long sys_rt_sigsuspend(sigset_t __user *unewset,
-		size_t sigsetsize);
-asmlinkage long sys_sigaltstack(const stack_t __user *uss,
-		stack_t __user *uoss, unsigned long r5, unsigned long r6,
-		unsigned long r7, unsigned long r8, struct pt_regs *regs);
-
-#endif /* __KERNEL__ */
-#endif /* __ASM_POWERPC_SYSCALLS_H */
diff --git a/include/asm-powerpc/system.h b/include/asm-powerpc/system.h
deleted file mode 100644
index e6e25e2364eb..000000000000
--- a/include/asm-powerpc/system.h
+++ /dev/null
@@ -1,546 +0,0 @@
-/*
- * Copyright (C) 1999 Cort Dougan <cort@cs.nmt.edu>
- */
-#ifndef _ASM_POWERPC_SYSTEM_H
-#define _ASM_POWERPC_SYSTEM_H
-
-#include <linux/kernel.h>
-#include <linux/irqflags.h>
-
-#include <asm/hw_irq.h>
-
-/*
- * Memory barrier.
- * The sync instruction guarantees that all memory accesses initiated
- * by this processor have been performed (with respect to all other
- * mechanisms that access memory).  The eieio instruction is a barrier
- * providing an ordering (separately) for (a) cacheable stores and (b)
- * loads and stores to non-cacheable memory (e.g. I/O devices).
- *
- * mb() prevents loads and stores being reordered across this point.
- * rmb() prevents loads being reordered across this point.
- * wmb() prevents stores being reordered across this point.
- * read_barrier_depends() prevents data-dependent loads being reordered
- *	across this point (nop on PPC).
- *
- * We have to use the sync instructions for mb(), since lwsync doesn't
- * order loads with respect to previous stores.  Lwsync is fine for
- * rmb(), though. Note that rmb() actually uses a sync on 32-bit
- * architectures.
- *
- * For wmb(), we use sync since wmb is used in drivers to order
- * stores to system memory with respect to writes to the device.
- * However, smp_wmb() can be a lighter-weight lwsync or eieio barrier
- * on SMP since it is only used to order updates to system memory.
- */
-#define mb()   __asm__ __volatile__ ("sync" : : : "memory")
-#define rmb()  __asm__ __volatile__ ("sync" : : : "memory")
-#define wmb()  __asm__ __volatile__ ("sync" : : : "memory")
-#define read_barrier_depends()  do { } while(0)
-
-#define set_mb(var, value)	do { var = value; mb(); } while (0)
-
-#ifdef __KERNEL__
-#define AT_VECTOR_SIZE_ARCH 6 /* entries in ARCH_DLINFO */
-#ifdef CONFIG_SMP
-
-#ifdef __SUBARCH_HAS_LWSYNC
-#    define SMPWMB      lwsync
-#else
-#    define SMPWMB      eieio
-#endif
-
-#define smp_mb()	mb()
-#define smp_rmb()	rmb()
-#define smp_wmb()	__asm__ __volatile__ (__stringify(SMPWMB) : : :"memory")
-#define smp_read_barrier_depends()	read_barrier_depends()
-#else
-#define smp_mb()	barrier()
-#define smp_rmb()	barrier()
-#define smp_wmb()	barrier()
-#define smp_read_barrier_depends()	do { } while(0)
-#endif /* CONFIG_SMP */
-
-/*
- * This is a barrier which prevents following instructions from being
- * started until the value of the argument x is known.  For example, if
- * x is a variable loaded from memory, this prevents following
- * instructions from being executed until the load has been performed.
- */
-#define data_barrier(x)	\
-	asm volatile("twi 0,%0,0; isync" : : "r" (x) : "memory");
-
-struct task_struct;
-struct pt_regs;
-
-#if defined(CONFIG_DEBUGGER) || defined(CONFIG_KEXEC)
-
-extern int (*__debugger)(struct pt_regs *regs);
-extern int (*__debugger_ipi)(struct pt_regs *regs);
-extern int (*__debugger_bpt)(struct pt_regs *regs);
-extern int (*__debugger_sstep)(struct pt_regs *regs);
-extern int (*__debugger_iabr_match)(struct pt_regs *regs);
-extern int (*__debugger_dabr_match)(struct pt_regs *regs);
-extern int (*__debugger_fault_handler)(struct pt_regs *regs);
-
-#define DEBUGGER_BOILERPLATE(__NAME) \
-static inline int __NAME(struct pt_regs *regs) \
-{ \
-	if (unlikely(__ ## __NAME)) \
-		return __ ## __NAME(regs); \
-	return 0; \
-}
-
-DEBUGGER_BOILERPLATE(debugger)
-DEBUGGER_BOILERPLATE(debugger_ipi)
-DEBUGGER_BOILERPLATE(debugger_bpt)
-DEBUGGER_BOILERPLATE(debugger_sstep)
-DEBUGGER_BOILERPLATE(debugger_iabr_match)
-DEBUGGER_BOILERPLATE(debugger_dabr_match)
-DEBUGGER_BOILERPLATE(debugger_fault_handler)
-
-#else
-static inline int debugger(struct pt_regs *regs) { return 0; }
-static inline int debugger_ipi(struct pt_regs *regs) { return 0; }
-static inline int debugger_bpt(struct pt_regs *regs) { return 0; }
-static inline int debugger_sstep(struct pt_regs *regs) { return 0; }
-static inline int debugger_iabr_match(struct pt_regs *regs) { return 0; }
-static inline int debugger_dabr_match(struct pt_regs *regs) { return 0; }
-static inline int debugger_fault_handler(struct pt_regs *regs) { return 0; }
-#endif
-
-extern int set_dabr(unsigned long dabr);
-extern void print_backtrace(unsigned long *);
-extern void show_regs(struct pt_regs * regs);
-extern void flush_instruction_cache(void);
-extern void hard_reset_now(void);
-extern void poweroff_now(void);
-
-#ifdef CONFIG_6xx
-extern long _get_L2CR(void);
-extern long _get_L3CR(void);
-extern void _set_L2CR(unsigned long);
-extern void _set_L3CR(unsigned long);
-#else
-#define _get_L2CR()	0L
-#define _get_L3CR()	0L
-#define _set_L2CR(val)	do { } while(0)
-#define _set_L3CR(val)	do { } while(0)
-#endif
-
-extern void via_cuda_init(void);
-extern void read_rtc_time(void);
-extern void pmac_find_display(void);
-extern void giveup_fpu(struct task_struct *);
-extern void disable_kernel_fp(void);
-extern void enable_kernel_fp(void);
-extern void flush_fp_to_thread(struct task_struct *);
-extern void enable_kernel_altivec(void);
-extern void giveup_altivec(struct task_struct *);
-extern void load_up_altivec(struct task_struct *);
-extern int emulate_altivec(struct pt_regs *);
-extern void __giveup_vsx(struct task_struct *);
-extern void giveup_vsx(struct task_struct *);
-extern void enable_kernel_spe(void);
-extern void giveup_spe(struct task_struct *);
-extern void load_up_spe(struct task_struct *);
-extern int fix_alignment(struct pt_regs *);
-extern void cvt_fd(float *from, double *to, struct thread_struct *thread);
-extern void cvt_df(double *from, float *to, struct thread_struct *thread);
-
-#ifndef CONFIG_SMP
-extern void discard_lazy_cpu_state(void);
-#else
-static inline void discard_lazy_cpu_state(void)
-{
-}
-#endif
-
-#ifdef CONFIG_ALTIVEC
-extern void flush_altivec_to_thread(struct task_struct *);
-#else
-static inline void flush_altivec_to_thread(struct task_struct *t)
-{
-}
-#endif
-
-#ifdef CONFIG_VSX
-extern void flush_vsx_to_thread(struct task_struct *);
-#else
-static inline void flush_vsx_to_thread(struct task_struct *t)
-{
-}
-#endif
-
-#ifdef CONFIG_SPE
-extern void flush_spe_to_thread(struct task_struct *);
-#else
-static inline void flush_spe_to_thread(struct task_struct *t)
-{
-}
-#endif
-
-extern int call_rtas(const char *, int, int, unsigned long *, ...);
-extern void cacheable_memzero(void *p, unsigned int nb);
-extern void *cacheable_memcpy(void *, const void *, unsigned int);
-extern int do_page_fault(struct pt_regs *, unsigned long, unsigned long);
-extern void bad_page_fault(struct pt_regs *, unsigned long, int);
-extern int die(const char *, struct pt_regs *, long);
-extern void _exception(int, struct pt_regs *, int, unsigned long);
-extern void _nmask_and_or_msr(unsigned long nmask, unsigned long or_val);
-
-#ifdef CONFIG_BOOKE_WDT
-extern u32 booke_wdt_enabled;
-extern u32 booke_wdt_period;
-#endif /* CONFIG_BOOKE_WDT */
-
-struct device_node;
-extern void note_scsi_host(struct device_node *, void *);
-
-extern struct task_struct *__switch_to(struct task_struct *,
-	struct task_struct *);
-#define switch_to(prev, next, last)	((last) = __switch_to((prev), (next)))
-
-struct thread_struct;
-extern struct task_struct *_switch(struct thread_struct *prev,
-				   struct thread_struct *next);
-
-extern unsigned int rtas_data;
-extern int mem_init_done;	/* set on boot once kmalloc can be called */
-extern int init_bootmem_done;	/* set on !NUMA once bootmem is available */
-extern unsigned long memory_limit;
-extern unsigned long klimit;
-
-extern void *alloc_maybe_bootmem(size_t size, gfp_t mask);
-extern void *zalloc_maybe_bootmem(size_t size, gfp_t mask);
-
-extern int powersave_nap;	/* set if nap mode can be used in idle loop */
-
-/*
- * Atomic exchange
- *
- * Changes the memory location '*ptr' to be val and returns
- * the previous value stored there.
- */
-static __always_inline unsigned long
-__xchg_u32(volatile void *p, unsigned long val)
-{
-	unsigned long prev;
-
-	__asm__ __volatile__(
-	LWSYNC_ON_SMP
-"1:	lwarx	%0,0,%2 \n"
-	PPC405_ERR77(0,%2)
-"	stwcx.	%3,0,%2 \n\
-	bne-	1b"
-	ISYNC_ON_SMP
-	: "=&r" (prev), "+m" (*(volatile unsigned int *)p)
-	: "r" (p), "r" (val)
-	: "cc", "memory");
-
-	return prev;
-}
-
-/*
- * Atomic exchange
- *
- * Changes the memory location '*ptr' to be val and returns
- * the previous value stored there.
- */
-static __always_inline unsigned long
-__xchg_u32_local(volatile void *p, unsigned long val)
-{
-	unsigned long prev;
-
-	__asm__ __volatile__(
-"1:	lwarx	%0,0,%2 \n"
-	PPC405_ERR77(0,%2)
-"	stwcx.	%3,0,%2 \n\
-	bne-	1b"
-	: "=&r" (prev), "+m" (*(volatile unsigned int *)p)
-	: "r" (p), "r" (val)
-	: "cc", "memory");
-
-	return prev;
-}
-
-#ifdef CONFIG_PPC64
-static __always_inline unsigned long
-__xchg_u64(volatile void *p, unsigned long val)
-{
-	unsigned long prev;
-
-	__asm__ __volatile__(
-	LWSYNC_ON_SMP
-"1:	ldarx	%0,0,%2 \n"
-	PPC405_ERR77(0,%2)
-"	stdcx.	%3,0,%2 \n\
-	bne-	1b"
-	ISYNC_ON_SMP
-	: "=&r" (prev), "+m" (*(volatile unsigned long *)p)
-	: "r" (p), "r" (val)
-	: "cc", "memory");
-
-	return prev;
-}
-
-static __always_inline unsigned long
-__xchg_u64_local(volatile void *p, unsigned long val)
-{
-	unsigned long prev;
-
-	__asm__ __volatile__(
-"1:	ldarx	%0,0,%2 \n"
-	PPC405_ERR77(0,%2)
-"	stdcx.	%3,0,%2 \n\
-	bne-	1b"
-	: "=&r" (prev), "+m" (*(volatile unsigned long *)p)
-	: "r" (p), "r" (val)
-	: "cc", "memory");
-
-	return prev;
-}
-#endif
-
-/*
- * This function doesn't exist, so you'll get a linker error
- * if something tries to do an invalid xchg().
- */
-extern void __xchg_called_with_bad_pointer(void);
-
-static __always_inline unsigned long
-__xchg(volatile void *ptr, unsigned long x, unsigned int size)
-{
-	switch (size) {
-	case 4:
-		return __xchg_u32(ptr, x);
-#ifdef CONFIG_PPC64
-	case 8:
-		return __xchg_u64(ptr, x);
-#endif
-	}
-	__xchg_called_with_bad_pointer();
-	return x;
-}
-
-static __always_inline unsigned long
-__xchg_local(volatile void *ptr, unsigned long x, unsigned int size)
-{
-	switch (size) {
-	case 4:
-		return __xchg_u32_local(ptr, x);
-#ifdef CONFIG_PPC64
-	case 8:
-		return __xchg_u64_local(ptr, x);
-#endif
-	}
-	__xchg_called_with_bad_pointer();
-	return x;
-}
-#define xchg(ptr,x)							     \
-  ({									     \
-     __typeof__(*(ptr)) _x_ = (x);					     \
-     (__typeof__(*(ptr))) __xchg((ptr), (unsigned long)_x_, sizeof(*(ptr))); \
-  })
-
-#define xchg_local(ptr,x)						     \
-  ({									     \
-     __typeof__(*(ptr)) _x_ = (x);					     \
-     (__typeof__(*(ptr))) __xchg_local((ptr),				     \
-     		(unsigned long)_x_, sizeof(*(ptr))); 			     \
-  })
-
-/*
- * Compare and exchange - if *p == old, set it to new,
- * and return the old value of *p.
- */
-#define __HAVE_ARCH_CMPXCHG	1
-
-static __always_inline unsigned long
-__cmpxchg_u32(volatile unsigned int *p, unsigned long old, unsigned long new)
-{
-	unsigned int prev;
-
-	__asm__ __volatile__ (
-	LWSYNC_ON_SMP
-"1:	lwarx	%0,0,%2		# __cmpxchg_u32\n\
-	cmpw	0,%0,%3\n\
-	bne-	2f\n"
-	PPC405_ERR77(0,%2)
-"	stwcx.	%4,0,%2\n\
-	bne-	1b"
-	ISYNC_ON_SMP
-	"\n\
-2:"
-	: "=&r" (prev), "+m" (*p)
-	: "r" (p), "r" (old), "r" (new)
-	: "cc", "memory");
-
-	return prev;
-}
-
-static __always_inline unsigned long
-__cmpxchg_u32_local(volatile unsigned int *p, unsigned long old,
-			unsigned long new)
-{
-	unsigned int prev;
-
-	__asm__ __volatile__ (
-"1:	lwarx	%0,0,%2		# __cmpxchg_u32\n\
-	cmpw	0,%0,%3\n\
-	bne-	2f\n"
-	PPC405_ERR77(0,%2)
-"	stwcx.	%4,0,%2\n\
-	bne-	1b"
-	"\n\
-2:"
-	: "=&r" (prev), "+m" (*p)
-	: "r" (p), "r" (old), "r" (new)
-	: "cc", "memory");
-
-	return prev;
-}
-
-#ifdef CONFIG_PPC64
-static __always_inline unsigned long
-__cmpxchg_u64(volatile unsigned long *p, unsigned long old, unsigned long new)
-{
-	unsigned long prev;
-
-	__asm__ __volatile__ (
-	LWSYNC_ON_SMP
-"1:	ldarx	%0,0,%2		# __cmpxchg_u64\n\
-	cmpd	0,%0,%3\n\
-	bne-	2f\n\
-	stdcx.	%4,0,%2\n\
-	bne-	1b"
-	ISYNC_ON_SMP
-	"\n\
-2:"
-	: "=&r" (prev), "+m" (*p)
-	: "r" (p), "r" (old), "r" (new)
-	: "cc", "memory");
-
-	return prev;
-}
-
-static __always_inline unsigned long
-__cmpxchg_u64_local(volatile unsigned long *p, unsigned long old,
-			unsigned long new)
-{
-	unsigned long prev;
-
-	__asm__ __volatile__ (
-"1:	ldarx	%0,0,%2		# __cmpxchg_u64\n\
-	cmpd	0,%0,%3\n\
-	bne-	2f\n\
-	stdcx.	%4,0,%2\n\
-	bne-	1b"
-	"\n\
-2:"
-	: "=&r" (prev), "+m" (*p)
-	: "r" (p), "r" (old), "r" (new)
-	: "cc", "memory");
-
-	return prev;
-}
-#endif
-
-/* This function doesn't exist, so you'll get a linker error
-   if something tries to do an invalid cmpxchg().  */
-extern void __cmpxchg_called_with_bad_pointer(void);
-
-static __always_inline unsigned long
-__cmpxchg(volatile void *ptr, unsigned long old, unsigned long new,
-	  unsigned int size)
-{
-	switch (size) {
-	case 4:
-		return __cmpxchg_u32(ptr, old, new);
-#ifdef CONFIG_PPC64
-	case 8:
-		return __cmpxchg_u64(ptr, old, new);
-#endif
-	}
-	__cmpxchg_called_with_bad_pointer();
-	return old;
-}
-
-static __always_inline unsigned long
-__cmpxchg_local(volatile void *ptr, unsigned long old, unsigned long new,
-	  unsigned int size)
-{
-	switch (size) {
-	case 4:
-		return __cmpxchg_u32_local(ptr, old, new);
-#ifdef CONFIG_PPC64
-	case 8:
-		return __cmpxchg_u64_local(ptr, old, new);
-#endif
-	}
-	__cmpxchg_called_with_bad_pointer();
-	return old;
-}
-
-#define cmpxchg(ptr, o, n)						 \
-  ({									 \
-     __typeof__(*(ptr)) _o_ = (o);					 \
-     __typeof__(*(ptr)) _n_ = (n);					 \
-     (__typeof__(*(ptr))) __cmpxchg((ptr), (unsigned long)_o_,		 \
-				    (unsigned long)_n_, sizeof(*(ptr))); \
-  })
-
-
-#define cmpxchg_local(ptr, o, n)					 \
-  ({									 \
-     __typeof__(*(ptr)) _o_ = (o);					 \
-     __typeof__(*(ptr)) _n_ = (n);					 \
-     (__typeof__(*(ptr))) __cmpxchg_local((ptr), (unsigned long)_o_,	 \
-				    (unsigned long)_n_, sizeof(*(ptr))); \
-  })
-
-#ifdef CONFIG_PPC64
-/*
- * We handle most unaligned accesses in hardware. On the other hand 
- * unaligned DMA can be very expensive on some ppc64 IO chips (it does
- * powers of 2 writes until it reaches sufficient alignment).
- *
- * Based on this we disable the IP header alignment in network drivers.
- * We also modify NET_SKB_PAD to be a cacheline in size, thus maintaining
- * cacheline alignment of buffers.
- */
-#define NET_IP_ALIGN	0
-#define NET_SKB_PAD	L1_CACHE_BYTES
-
-#define cmpxchg64(ptr, o, n)						\
-  ({									\
-	BUILD_BUG_ON(sizeof(*(ptr)) != 8);				\
-	cmpxchg((ptr), (o), (n));					\
-  })
-#define cmpxchg64_local(ptr, o, n)					\
-  ({									\
-	BUILD_BUG_ON(sizeof(*(ptr)) != 8);				\
-	cmpxchg_local((ptr), (o), (n));					\
-  })
-#else
-#include <asm-generic/cmpxchg-local.h>
-#define cmpxchg64_local(ptr, o, n) __cmpxchg64_local_generic((ptr), (o), (n))
-#endif
-
-#define arch_align_stack(x) (x)
-
-/* Used in very early kernel initialization. */
-extern unsigned long reloc_offset(void);
-extern unsigned long add_reloc_offset(unsigned long);
-extern void reloc_got2(unsigned long);
-
-#define PTRRELOC(x)	((typeof(x)) add_reloc_offset((unsigned long)(x)))
-
-#ifdef CONFIG_VIRT_CPU_ACCOUNTING
-extern void account_system_vtime(struct task_struct *);
-#endif
-
-extern struct dentry *powerpc_debugfs_root;
-
-#endif /* __KERNEL__ */
-#endif /* _ASM_POWERPC_SYSTEM_H */
diff --git a/include/asm-powerpc/thread_info.h b/include/asm-powerpc/thread_info.h
deleted file mode 100644
index b705c2a7651a..000000000000
--- a/include/asm-powerpc/thread_info.h
+++ /dev/null
@@ -1,166 +0,0 @@
-/* thread_info.h: PowerPC low-level thread information
- * adapted from the i386 version by Paul Mackerras
- *
- * Copyright (C) 2002  David Howells (dhowells@redhat.com)
- * - Incorporating suggestions made by Linus Torvalds and Dave Miller
- */
-
-#ifndef _ASM_POWERPC_THREAD_INFO_H
-#define _ASM_POWERPC_THREAD_INFO_H
-
-#ifdef __KERNEL__
-
-/* We have 8k stacks on ppc32 and 16k on ppc64 */
-
-#ifdef CONFIG_PPC64
-#define THREAD_SHIFT		14
-#else
-#define THREAD_SHIFT		13
-#endif
-
-#define THREAD_SIZE		(1 << THREAD_SHIFT)
-
-#ifndef __ASSEMBLY__
-#include <linux/cache.h>
-#include <asm/processor.h>
-#include <asm/page.h>
-#include <linux/stringify.h>
-
-/*
- * low level task data.
- */
-struct thread_info {
-	struct task_struct *task;		/* main task structure */
-	struct exec_domain *exec_domain;	/* execution domain */
-	int		cpu;			/* cpu we're on */
-	int		preempt_count;		/* 0 => preemptable,
-						   <0 => BUG */
-	struct restart_block restart_block;
-	unsigned long	local_flags;		/* private flags for thread */
-
-	/* low level flags - has atomic operations done on it */
-	unsigned long	flags ____cacheline_aligned_in_smp;
-};
-
-/*
- * macros/functions for gaining access to the thread information structure
- *
- * preempt_count needs to be 1 initially, until the scheduler is functional.
- */
-#define INIT_THREAD_INFO(tsk)			\
-{						\
-	.task =		&tsk,			\
-	.exec_domain =	&default_exec_domain,	\
-	.cpu =		0,			\
-	.preempt_count = 1,			\
-	.restart_block = {			\
-		.fn = do_no_restart_syscall,	\
-	},					\
-	.flags =	0,			\
-}
-
-#define init_thread_info	(init_thread_union.thread_info)
-#define init_stack		(init_thread_union.stack)
-
-/* thread information allocation */
-
-#if THREAD_SHIFT >= PAGE_SHIFT
-
-#define THREAD_ORDER	(THREAD_SHIFT - PAGE_SHIFT)
-
-#ifdef CONFIG_DEBUG_STACK_USAGE
-#define alloc_thread_info(tsk)	\
-	((struct thread_info *)__get_free_pages(GFP_KERNEL | \
-		__GFP_ZERO, THREAD_ORDER))
-#else
-#define alloc_thread_info(tsk)	\
-	((struct thread_info *)__get_free_pages(GFP_KERNEL, THREAD_ORDER))
-#endif
-#define free_thread_info(ti)	free_pages((unsigned long)ti, THREAD_ORDER)
-
-#else /* THREAD_SHIFT < PAGE_SHIFT */
-
-extern struct thread_info *alloc_thread_info(struct task_struct *tsk);
-extern void free_thread_info(struct thread_info *ti);
-
-#endif /* THREAD_SHIFT < PAGE_SHIFT */
-
-/* how to get the thread information struct from C */
-static inline struct thread_info *current_thread_info(void)
-{
-	register unsigned long sp asm("r1");
-
-	/* gcc4, at least, is smart enough to turn this into a single
-	 * rlwinm for ppc32 and clrrdi for ppc64 */
-	return (struct thread_info *)(sp & ~(THREAD_SIZE-1));
-}
-
-#endif /* __ASSEMBLY__ */
-
-#define PREEMPT_ACTIVE		0x10000000
-
-/*
- * thread information flag bit numbers
- */
-#define TIF_SYSCALL_TRACE	0	/* syscall trace active */
-#define TIF_SIGPENDING		1	/* signal pending */
-#define TIF_NEED_RESCHED	2	/* rescheduling necessary */
-#define TIF_POLLING_NRFLAG	3	/* true if poll_idle() is polling
-					   TIF_NEED_RESCHED */
-#define TIF_32BIT		4	/* 32 bit binary */
-#define TIF_PERFMON_WORK	5	/* work for pfm_handle_work() */
-#define TIF_PERFMON_CTXSW	6	/* perfmon needs ctxsw calls */
-#define TIF_SYSCALL_AUDIT	7	/* syscall auditing active */
-#define TIF_SINGLESTEP		8	/* singlestepping active */
-#define TIF_MEMDIE		9
-#define TIF_SECCOMP		10	/* secure computing */
-#define TIF_RESTOREALL		11	/* Restore all regs (implies NOERROR) */
-#define TIF_NOERROR		12	/* Force successful syscall return */
-#define TIF_FREEZE		14	/* Freezing for suspend */
-#define TIF_RUNLATCH		15	/* Is the runlatch enabled? */
-#define TIF_ABI_PENDING		16	/* 32/64 bit switch needed */
-
-/* as above, but as bit values */
-#define _TIF_SYSCALL_TRACE	(1<<TIF_SYSCALL_TRACE)
-#define _TIF_SIGPENDING		(1<<TIF_SIGPENDING)
-#define _TIF_NEED_RESCHED	(1<<TIF_NEED_RESCHED)
-#define _TIF_POLLING_NRFLAG	(1<<TIF_POLLING_NRFLAG)
-#define _TIF_32BIT		(1<<TIF_32BIT)
-#define _TIF_PERFMON_WORK	(1<<TIF_PERFMON_WORK)
-#define _TIF_PERFMON_CTXSW	(1<<TIF_PERFMON_CTXSW)
-#define _TIF_SYSCALL_AUDIT	(1<<TIF_SYSCALL_AUDIT)
-#define _TIF_SINGLESTEP		(1<<TIF_SINGLESTEP)
-#define _TIF_SECCOMP		(1<<TIF_SECCOMP)
-#define _TIF_RESTOREALL		(1<<TIF_RESTOREALL)
-#define _TIF_NOERROR		(1<<TIF_NOERROR)
-#define _TIF_FREEZE		(1<<TIF_FREEZE)
-#define _TIF_RUNLATCH		(1<<TIF_RUNLATCH)
-#define _TIF_ABI_PENDING	(1<<TIF_ABI_PENDING)
-#define _TIF_SYSCALL_T_OR_A	(_TIF_SYSCALL_TRACE|_TIF_SYSCALL_AUDIT|_TIF_SECCOMP)
-
-#define _TIF_USER_WORK_MASK	(_TIF_SIGPENDING | _TIF_NEED_RESCHED)
-#define _TIF_PERSYSCALL_MASK	(_TIF_RESTOREALL|_TIF_NOERROR)
-
-/* Bits in local_flags */
-/* Don't move TLF_NAPPING without adjusting the code in entry_32.S */
-#define TLF_NAPPING		0	/* idle thread enabled NAP mode */
-#define TLF_SLEEPING		1	/* suspend code enabled SLEEP mode */
-#define TLF_RESTORE_SIGMASK	2	/* Restore signal mask in do_signal */
-
-#define _TLF_NAPPING		(1 << TLF_NAPPING)
-#define _TLF_SLEEPING		(1 << TLF_SLEEPING)
-#define _TLF_RESTORE_SIGMASK	(1 << TLF_RESTORE_SIGMASK)
-
-#ifndef __ASSEMBLY__
-#define HAVE_SET_RESTORE_SIGMASK	1
-static inline void set_restore_sigmask(void)
-{
-	struct thread_info *ti = current_thread_info();
-	ti->local_flags |= _TLF_RESTORE_SIGMASK;
-	set_bit(TIF_SIGPENDING, &ti->flags);
-}
-#endif	/* !__ASSEMBLY__ */
-
-#endif /* __KERNEL__ */
-
-#endif /* _ASM_POWERPC_THREAD_INFO_H */
diff --git a/include/asm-powerpc/tlbflush.h b/include/asm-powerpc/tlbflush.h
deleted file mode 100644
index 5c9108147644..000000000000
--- a/include/asm-powerpc/tlbflush.h
+++ /dev/null
@@ -1,177 +0,0 @@
-#ifndef _ASM_POWERPC_TLBFLUSH_H
-#define _ASM_POWERPC_TLBFLUSH_H
-
-/*
- * TLB flushing:
- *
- *  - flush_tlb_mm(mm) flushes the specified mm context TLB's
- *  - flush_tlb_page(vma, vmaddr) flushes one page
- *  - flush_tlb_page_nohash(vma, vmaddr) flushes one page if SW loaded TLB
- *  - flush_tlb_range(vma, start, end) flushes a range of pages
- *  - flush_tlb_kernel_range(start, end) flushes a range of kernel pages
- *
- *  This program is free software; you can redistribute it and/or
- *  modify it under the terms of the GNU General Public License
- *  as published by the Free Software Foundation; either version
- *  2 of the License, or (at your option) any later version.
- */
-#ifdef __KERNEL__
-
-#if defined(CONFIG_4xx) || defined(CONFIG_8xx) || defined(CONFIG_FSL_BOOKE)
-/*
- * TLB flushing for software loaded TLB chips
- *
- * TODO: (CONFIG_FSL_BOOKE) determine if flush_tlb_range &
- * flush_tlb_kernel_range are best implemented as tlbia vs
- * specific tlbie's
- */
-
-#include <linux/mm.h>
-
-extern void _tlbie(unsigned long address, unsigned int pid);
-
-#if defined(CONFIG_40x) || defined(CONFIG_8xx)
-#define _tlbia()	asm volatile ("tlbia; sync" : : : "memory")
-#else /* CONFIG_44x || CONFIG_FSL_BOOKE */
-extern void _tlbia(void);
-#endif
-
-static inline void flush_tlb_mm(struct mm_struct *mm)
-{
-	_tlbia();
-}
-
-static inline void flush_tlb_page(struct vm_area_struct *vma,
-				  unsigned long vmaddr)
-{
-	_tlbie(vmaddr, vma ? vma->vm_mm->context.id : 0);
-}
-
-static inline void flush_tlb_page_nohash(struct vm_area_struct *vma,
-					 unsigned long vmaddr)
-{
-	_tlbie(vmaddr, vma ? vma->vm_mm->context.id : 0);
-}
-
-static inline void flush_tlb_range(struct vm_area_struct *vma,
-				   unsigned long start, unsigned long end)
-{
-	_tlbia();
-}
-
-static inline void flush_tlb_kernel_range(unsigned long start,
-					  unsigned long end)
-{
-	_tlbia();
-}
-
-#elif defined(CONFIG_PPC32)
-/*
- * TLB flushing for "classic" hash-MMMU 32-bit CPUs, 6xx, 7xx, 7xxx
- */
-extern void _tlbie(unsigned long address);
-extern void _tlbia(void);
-
-extern void flush_tlb_mm(struct mm_struct *mm);
-extern void flush_tlb_page(struct vm_area_struct *vma, unsigned long vmaddr);
-extern void flush_tlb_page_nohash(struct vm_area_struct *vma, unsigned long addr);
-extern void flush_tlb_range(struct vm_area_struct *vma, unsigned long start,
-			    unsigned long end);
-extern void flush_tlb_kernel_range(unsigned long start, unsigned long end);
-
-#else
-/*
- * TLB flushing for 64-bit has-MMU CPUs
- */
-
-#include <linux/percpu.h>
-#include <asm/page.h>
-
-#define PPC64_TLB_BATCH_NR 192
-
-struct ppc64_tlb_batch {
-	int			active;
-	unsigned long		index;
-	struct mm_struct	*mm;
-	real_pte_t		pte[PPC64_TLB_BATCH_NR];
-	unsigned long		vaddr[PPC64_TLB_BATCH_NR];
-	unsigned int		psize;
-	int			ssize;
-};
-DECLARE_PER_CPU(struct ppc64_tlb_batch, ppc64_tlb_batch);
-
-extern void __flush_tlb_pending(struct ppc64_tlb_batch *batch);
-
-extern void hpte_need_flush(struct mm_struct *mm, unsigned long addr,
-			    pte_t *ptep, unsigned long pte, int huge);
-
-#define __HAVE_ARCH_ENTER_LAZY_MMU_MODE
-
-static inline void arch_enter_lazy_mmu_mode(void)
-{
-	struct ppc64_tlb_batch *batch = &__get_cpu_var(ppc64_tlb_batch);
-
-	batch->active = 1;
-}
-
-static inline void arch_leave_lazy_mmu_mode(void)
-{
-	struct ppc64_tlb_batch *batch = &__get_cpu_var(ppc64_tlb_batch);
-
-	if (batch->index)
-		__flush_tlb_pending(batch);
-	batch->active = 0;
-}
-
-#define arch_flush_lazy_mmu_mode()      do {} while (0)
-
-
-extern void flush_hash_page(unsigned long va, real_pte_t pte, int psize,
-			    int ssize, int local);
-extern void flush_hash_range(unsigned long number, int local);
-
-
-static inline void flush_tlb_mm(struct mm_struct *mm)
-{
-}
-
-static inline void flush_tlb_page(struct vm_area_struct *vma,
-				  unsigned long vmaddr)
-{
-}
-
-static inline void flush_tlb_page_nohash(struct vm_area_struct *vma,
-					 unsigned long vmaddr)
-{
-}
-
-static inline void flush_tlb_range(struct vm_area_struct *vma,
-				   unsigned long start, unsigned long end)
-{
-}
-
-static inline void flush_tlb_kernel_range(unsigned long start,
-					  unsigned long end)
-{
-}
-
-/* Private function for use by PCI IO mapping code */
-extern void __flush_hash_table_range(struct mm_struct *mm, unsigned long start,
-				     unsigned long end);
-
-
-#endif
-
-/*
- * This gets called at the end of handling a page fault, when
- * the kernel has put a new PTE into the page table for the process.
- * We use it to ensure coherency between the i-cache and d-cache
- * for the page which has just been mapped in.
- * On machines which use an MMU hash table, we use this to put a
- * corresponding HPTE into the hash table ahead of time, instead of
- * waiting for the inevitable extra hash-table miss exception.
- */
-extern void update_mmu_cache(struct vm_area_struct *, unsigned long, pte_t);
-
-#endif /*__KERNEL__ */
-#endif /* _ASM_POWERPC_TLBFLUSH_H */
diff --git a/include/asm-powerpc/topology.h b/include/asm-powerpc/topology.h
deleted file mode 100644
index 100c6fbfc587..000000000000
--- a/include/asm-powerpc/topology.h
+++ /dev/null
@@ -1,115 +0,0 @@
-#ifndef _ASM_POWERPC_TOPOLOGY_H
-#define _ASM_POWERPC_TOPOLOGY_H
-#ifdef __KERNEL__
-
-
-struct sys_device;
-struct device_node;
-
-#ifdef CONFIG_NUMA
-
-#include <asm/mmzone.h>
-
-static inline int cpu_to_node(int cpu)
-{
-	return numa_cpu_lookup_table[cpu];
-}
-
-#define parent_node(node)	(node)
-
-static inline cpumask_t node_to_cpumask(int node)
-{
-	return numa_cpumask_lookup_table[node];
-}
-
-static inline int node_to_first_cpu(int node)
-{
-	cpumask_t tmp;
-	tmp = node_to_cpumask(node);
-	return first_cpu(tmp);
-}
-
-int of_node_to_nid(struct device_node *device);
-
-struct pci_bus;
-#ifdef CONFIG_PCI
-extern int pcibus_to_node(struct pci_bus *bus);
-#else
-static inline int pcibus_to_node(struct pci_bus *bus)
-{
-	return -1;
-}
-#endif
-
-#define pcibus_to_cpumask(bus)	(pcibus_to_node(bus) == -1 ? \
-					CPU_MASK_ALL : \
-					node_to_cpumask(pcibus_to_node(bus)) \
-				)
-
-/* sched_domains SD_NODE_INIT for PPC64 machines */
-#define SD_NODE_INIT (struct sched_domain) {		\
-	.span			= CPU_MASK_NONE,	\
-	.parent			= NULL,			\
-	.child			= NULL,			\
-	.groups			= NULL,			\
-	.min_interval		= 8,			\
-	.max_interval		= 32,			\
-	.busy_factor		= 32,			\
-	.imbalance_pct		= 125,			\
-	.cache_nice_tries	= 1,			\
-	.busy_idx		= 3,			\
-	.idle_idx		= 1,			\
-	.newidle_idx		= 2,			\
-	.wake_idx		= 1,			\
-	.flags			= SD_LOAD_BALANCE	\
-				| SD_BALANCE_EXEC	\
-				| SD_BALANCE_NEWIDLE	\
-				| SD_WAKE_IDLE		\
-				| SD_SERIALIZE		\
-				| SD_WAKE_BALANCE,	\
-	.last_balance		= jiffies,		\
-	.balance_interval	= 1,			\
-	.nr_balance_failed	= 0,			\
-}
-
-extern void __init dump_numa_cpu_topology(void);
-
-extern int sysfs_add_device_to_node(struct sys_device *dev, int nid);
-extern void sysfs_remove_device_from_node(struct sys_device *dev, int nid);
-
-#else
-
-static inline int of_node_to_nid(struct device_node *device)
-{
-	return 0;
-}
-
-static inline void dump_numa_cpu_topology(void) {}
-
-static inline int sysfs_add_device_to_node(struct sys_device *dev, int nid)
-{
-	return 0;
-}
-
-static inline void sysfs_remove_device_from_node(struct sys_device *dev,
-						int nid)
-{
-}
-
-#endif /* CONFIG_NUMA */
-
-#include <asm-generic/topology.h>
-
-#ifdef CONFIG_SMP
-#include <asm/cputable.h>
-#define smt_capable()		(cpu_has_feature(CPU_FTR_SMT))
-
-#ifdef CONFIG_PPC64
-#include <asm/smp.h>
-
-#define topology_thread_siblings(cpu)	(per_cpu(cpu_sibling_map, cpu))
-#endif
-#endif
-
-#endif /* __KERNEL__ */
-#endif	/* _ASM_POWERPC_TOPOLOGY_H */
diff --git a/include/asm-powerpc/unistd.h b/include/asm-powerpc/unistd.h
deleted file mode 100644
index ce91bb662063..000000000000
--- a/include/asm-powerpc/unistd.h
+++ /dev/null
@@ -1,392 +0,0 @@
-#ifndef _ASM_POWERPC_UNISTD_H_
-#define _ASM_POWERPC_UNISTD_H_
-
-/*
- * This file contains the system call numbers.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-
-#define __NR_restart_syscall	  0
-#define __NR_exit		  1
-#define __NR_fork		  2
-#define __NR_read		  3
-#define __NR_write		  4
-#define __NR_open		  5
-#define __NR_close		  6
-#define __NR_waitpid		  7
-#define __NR_creat		  8
-#define __NR_link		  9
-#define __NR_unlink		 10
-#define __NR_execve		 11
-#define __NR_chdir		 12
-#define __NR_time		 13
-#define __NR_mknod		 14
-#define __NR_chmod		 15
-#define __NR_lchown		 16
-#define __NR_break		 17
-#define __NR_oldstat		 18
-#define __NR_lseek		 19
-#define __NR_getpid		 20
-#define __NR_mount		 21
-#define __NR_umount		 22
-#define __NR_setuid		 23
-#define __NR_getuid		 24
-#define __NR_stime		 25
-#define __NR_ptrace		 26
-#define __NR_alarm		 27
-#define __NR_oldfstat		 28
-#define __NR_pause		 29
-#define __NR_utime		 30
-#define __NR_stty		 31
-#define __NR_gtty		 32
-#define __NR_access		 33
-#define __NR_nice		 34
-#define __NR_ftime		 35
-#define __NR_sync		 36
-#define __NR_kill		 37
-#define __NR_rename		 38
-#define __NR_mkdir		 39
-#define __NR_rmdir		 40
-#define __NR_dup		 41
-#define __NR_pipe		 42
-#define __NR_times		 43
-#define __NR_prof		 44
-#define __NR_brk		 45
-#define __NR_setgid		 46
-#define __NR_getgid		 47
-#define __NR_signal		 48
-#define __NR_geteuid		 49
-#define __NR_getegid		 50
-#define __NR_acct		 51
-#define __NR_umount2		 52
-#define __NR_lock		 53
-#define __NR_ioctl		 54
-#define __NR_fcntl		 55
-#define __NR_mpx		 56
-#define __NR_setpgid		 57
-#define __NR_ulimit		 58
-#define __NR_oldolduname	 59
-#define __NR_umask		 60
-#define __NR_chroot		 61
-#define __NR_ustat		 62
-#define __NR_dup2		 63
-#define __NR_getppid		 64
-#define __NR_getpgrp		 65
-#define __NR_setsid		 66
-#define __NR_sigaction		 67
-#define __NR_sgetmask		 68
-#define __NR_ssetmask		 69
-#define __NR_setreuid		 70
-#define __NR_setregid		 71
-#define __NR_sigsuspend		 72
-#define __NR_sigpending		 73
-#define __NR_sethostname	 74
-#define __NR_setrlimit		 75
-#define __NR_getrlimit		 76
-#define __NR_getrusage		 77
-#define __NR_gettimeofday	 78
-#define __NR_settimeofday	 79
-#define __NR_getgroups		 80
-#define __NR_setgroups		 81
-#define __NR_select		 82
-#define __NR_symlink		 83
-#define __NR_oldlstat		 84
-#define __NR_readlink		 85
-#define __NR_uselib		 86
-#define __NR_swapon		 87
-#define __NR_reboot		 88
-#define __NR_readdir		 89
-#define __NR_mmap		 90
-#define __NR_munmap		 91
-#define __NR_truncate		 92
-#define __NR_ftruncate		 93
-#define __NR_fchmod		 94
-#define __NR_fchown		 95
-#define __NR_getpriority	 96
-#define __NR_setpriority	 97
-#define __NR_profil		 98
-#define __NR_statfs		 99
-#define __NR_fstatfs		100
-#define __NR_ioperm		101
-#define __NR_socketcall		102
-#define __NR_syslog		103
-#define __NR_setitimer		104
-#define __NR_getitimer		105
-#define __NR_stat		106
-#define __NR_lstat		107
-#define __NR_fstat		108
-#define __NR_olduname		109
-#define __NR_iopl		110
-#define __NR_vhangup		111
-#define __NR_idle		112
-#define __NR_vm86		113
-#define __NR_wait4		114
-#define __NR_swapoff		115
-#define __NR_sysinfo		116
-#define __NR_ipc		117
-#define __NR_fsync		118
-#define __NR_sigreturn		119
-#define __NR_clone		120
-#define __NR_setdomainname	121
-#define __NR_uname		122
-#define __NR_modify_ldt		123
-#define __NR_adjtimex		124
-#define __NR_mprotect		125
-#define __NR_sigprocmask	126
-#define __NR_create_module	127
-#define __NR_init_module	128
-#define __NR_delete_module	129
-#define __NR_get_kernel_syms	130
-#define __NR_quotactl		131
-#define __NR_getpgid		132
-#define __NR_fchdir		133
-#define __NR_bdflush		134
-#define __NR_sysfs		135
-#define __NR_personality	136
-#define __NR_afs_syscall	137 /* Syscall for Andrew File System */
-#define __NR_setfsuid		138
-#define __NR_setfsgid		139
-#define __NR__llseek		140
-#define __NR_getdents		141
-#define __NR__newselect		142
-#define __NR_flock		143
-#define __NR_msync		144
-#define __NR_readv		145
-#define __NR_writev		146
-#define __NR_getsid		147
-#define __NR_fdatasync		148
-#define __NR__sysctl		149
-#define __NR_mlock		150
-#define __NR_munlock		151
-#define __NR_mlockall		152
-#define __NR_munlockall		153
-#define __NR_sched_setparam		154
-#define __NR_sched_getparam		155
-#define __NR_sched_setscheduler		156
-#define __NR_sched_getscheduler		157
-#define __NR_sched_yield		158
-#define __NR_sched_get_priority_max	159
-#define __NR_sched_get_priority_min	160
-#define __NR_sched_rr_get_interval	161
-#define __NR_nanosleep		162
-#define __NR_mremap		163
-#define __NR_setresuid		164
-#define __NR_getresuid		165
-#define __NR_query_module	166
-#define __NR_poll		167
-#define __NR_nfsservctl		168
-#define __NR_setresgid		169
-#define __NR_getresgid		170
-#define __NR_prctl		171
-#define __NR_rt_sigreturn	172
-#define __NR_rt_sigaction	173
-#define __NR_rt_sigprocmask	174
-#define __NR_rt_sigpending	175
-#define __NR_rt_sigtimedwait	176
-#define __NR_rt_sigqueueinfo	177
-#define __NR_rt_sigsuspend	178
-#define __NR_pread64		179
-#define __NR_pwrite64		180
-#define __NR_chown		181
-#define __NR_getcwd		182
-#define __NR_capget		183
-#define __NR_capset		184
-#define __NR_sigaltstack	185
-#define __NR_sendfile		186
-#define __NR_getpmsg		187	/* some people actually want streams */
-#define __NR_putpmsg		188	/* some people actually want streams */
-#define __NR_vfork		189
-#define __NR_ugetrlimit		190	/* SuS compliant getrlimit */
-#define __NR_readahead		191
-#ifndef __powerpc64__			/* these are 32-bit only */
-#define __NR_mmap2		192
-#define __NR_truncate64		193
-#define __NR_ftruncate64	194
-#define __NR_stat64		195
-#define __NR_lstat64		196
-#define __NR_fstat64		197
-#endif
-#define __NR_pciconfig_read	198
-#define __NR_pciconfig_write	199
-#define __NR_pciconfig_iobase	200
-#define __NR_multiplexer	201
-#define __NR_getdents64		202
-#define __NR_pivot_root		203
-#ifndef __powerpc64__
-#define __NR_fcntl64		204
-#endif
-#define __NR_madvise		205
-#define __NR_mincore		206
-#define __NR_gettid		207
-#define __NR_tkill		208
-#define __NR_setxattr		209
-#define __NR_lsetxattr		210
-#define __NR_fsetxattr		211
-#define __NR_getxattr		212
-#define __NR_lgetxattr		213
-#define __NR_fgetxattr		214
-#define __NR_listxattr		215
-#define __NR_llistxattr		216
-#define __NR_flistxattr		217
-#define __NR_removexattr	218
-#define __NR_lremovexattr	219
-#define __NR_fremovexattr	220
-#define __NR_futex		221
-#define __NR_sched_setaffinity	222
-#define __NR_sched_getaffinity	223
-/* 224 currently unused */
-#define __NR_tuxcall		225
-#ifndef __powerpc64__
-#define __NR_sendfile64		226
-#endif
-#define __NR_io_setup		227
-#define __NR_io_destroy		228
-#define __NR_io_getevents	229
-#define __NR_io_submit		230
-#define __NR_io_cancel		231
-#define __NR_set_tid_address	232
-#define __NR_fadvise64		233
-#define __NR_exit_group		234
-#define __NR_lookup_dcookie	235
-#define __NR_epoll_create	236
-#define __NR_epoll_ctl		237
-#define __NR_epoll_wait		238
-#define __NR_remap_file_pages	239
-#define __NR_timer_create	240
-#define __NR_timer_settime	241
-#define __NR_timer_gettime	242
-#define __NR_timer_getoverrun	243
-#define __NR_timer_delete	244
-#define __NR_clock_settime	245
-#define __NR_clock_gettime	246
-#define __NR_clock_getres	247
-#define __NR_clock_nanosleep	248
-#define __NR_swapcontext	249
-#define __NR_tgkill		250
-#define __NR_utimes		251
-#define __NR_statfs64		252
-#define __NR_fstatfs64		253
-#ifndef __powerpc64__
-#define __NR_fadvise64_64	254
-#endif
-#define __NR_rtas		255
-#define __NR_sys_debug_setcontext 256
-/* Number 257 is reserved for vserver */
-#define __NR_migrate_pages	258
-#define __NR_mbind		259
-#define __NR_get_mempolicy	260
-#define __NR_set_mempolicy	261
-#define __NR_mq_open		262
-#define __NR_mq_unlink		263
-#define __NR_mq_timedsend	264
-#define __NR_mq_timedreceive	265
-#define __NR_mq_notify		266
-#define __NR_mq_getsetattr	267
-#define __NR_kexec_load		268
-#define __NR_add_key		269
-#define __NR_request_key	270
-#define __NR_keyctl		271
-#define __NR_waitid		272
-#define __NR_ioprio_set		273
-#define __NR_ioprio_get		274
-#define __NR_inotify_init	275
-#define __NR_inotify_add_watch	276
-#define __NR_inotify_rm_watch	277
-#define __NR_spu_run		278
-#define __NR_spu_create		279
-#define __NR_pselect6		280
-#define __NR_ppoll		281
-#define __NR_unshare		282
-#define __NR_splice		283
-#define __NR_tee		284
-#define __NR_vmsplice		285
-#define __NR_openat		286
-#define __NR_mkdirat		287
-#define __NR_mknodat		288
-#define __NR_fchownat		289
-#define __NR_futimesat		290
-#ifdef __powerpc64__
-#define __NR_newfstatat		291
-#else
-#define __NR_fstatat64		291
-#endif
-#define __NR_unlinkat		292
-#define __NR_renameat		293
-#define __NR_linkat		294
-#define __NR_symlinkat		295
-#define __NR_readlinkat		296
-#define __NR_fchmodat		297
-#define __NR_faccessat		298
-#define __NR_get_robust_list	299
-#define __NR_set_robust_list	300
-#define __NR_move_pages		301
-#define __NR_getcpu		302
-#define __NR_epoll_pwait	303
-#define __NR_utimensat		304
-#define __NR_signalfd		305
-#define __NR_timerfd_create	306
-#define __NR_eventfd		307
-#define __NR_sync_file_range2	308
-#define __NR_fallocate		309
-#define __NR_subpage_prot	310
-#define __NR_timerfd_settime	311
-#define __NR_timerfd_gettime	312
-
-#ifdef __KERNEL__
-
-#define __NR_syscalls		313
-
-#define __NR__exit __NR_exit
-#define NR_syscalls	__NR_syscalls
-
-#ifndef __ASSEMBLY__
-
-#include <linux/types.h>
-#include <linux/compiler.h>
-#include <linux/linkage.h>
-
-#define __ARCH_WANT_IPC_PARSE_VERSION
-#define __ARCH_WANT_OLD_READDIR
-#define __ARCH_WANT_STAT64
-#define __ARCH_WANT_SYS_ALARM
-#define __ARCH_WANT_SYS_GETHOSTNAME
-#define __ARCH_WANT_SYS_PAUSE
-#define __ARCH_WANT_SYS_SGETMASK
-#define __ARCH_WANT_SYS_SIGNAL
-#define __ARCH_WANT_SYS_TIME
-#define __ARCH_WANT_SYS_UTIME
-#define __ARCH_WANT_SYS_WAITPID
-#define __ARCH_WANT_SYS_SOCKETCALL
-#define __ARCH_WANT_SYS_FADVISE64
-#define __ARCH_WANT_SYS_GETPGRP
-#define __ARCH_WANT_SYS_LLSEEK
-#define __ARCH_WANT_SYS_NICE
-#define __ARCH_WANT_SYS_OLD_GETRLIMIT
-#define __ARCH_WANT_SYS_OLDUMOUNT
-#define __ARCH_WANT_SYS_SIGPENDING
-#define __ARCH_WANT_SYS_SIGPROCMASK
-#define __ARCH_WANT_SYS_RT_SIGACTION
-#define __ARCH_WANT_SYS_RT_SIGSUSPEND
-#ifdef CONFIG_PPC32
-#define __ARCH_WANT_OLD_STAT
-#endif
-#ifdef CONFIG_PPC64
-#define __ARCH_WANT_COMPAT_SYS_TIME
-#define __ARCH_WANT_COMPAT_SYS_RT_SIGSUSPEND
-#define __ARCH_WANT_SYS_NEWFSTATAT
-#endif
-
-/*
- * "Conditional" syscalls
- */
-#define cond_syscall(x) \
-	asmlinkage long x (void) __attribute__((weak,alias("sys_ni_syscall")))
-
-#endif		/* __ASSEMBLY__ */
-#endif		/* __KERNEL__ */
-
-#endif /* _ASM_POWERPC_UNISTD_H_ */
diff --git a/include/asm-powerpc/vio.h b/include/asm-powerpc/vio.h
deleted file mode 100644
index 56512a968dab..000000000000
--- a/include/asm-powerpc/vio.h
+++ /dev/null
@@ -1,95 +0,0 @@
-/*
- * IBM PowerPC Virtual I/O Infrastructure Support.
- *
- * Copyright (c) 2003 IBM Corp.
- *  Dave Engebretsen engebret@us.ibm.com
- *  Santiago Leon santil@us.ibm.com
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-
-#ifndef _ASM_POWERPC_VIO_H
-#define _ASM_POWERPC_VIO_H
-#ifdef __KERNEL__
-
-#include <linux/init.h>
-#include <linux/errno.h>
-#include <linux/device.h>
-#include <linux/dma-mapping.h>
-#include <linux/mod_devicetable.h>
-
-#include <asm/hvcall.h>
-#include <asm/scatterlist.h>
-
-/*
- * Architecture-specific constants for drivers to
- * extract attributes of the device using vio_get_attribute()
- */
-#define VETH_MAC_ADDR "local-mac-address"
-#define VETH_MCAST_FILTER_SIZE "ibm,mac-address-filters"
-
-/* End architecture-specific constants */
-
-#define h_vio_signal(ua, mode) \
-  plpar_hcall_norets(H_VIO_SIGNAL, ua, mode)
-
-#define VIO_IRQ_DISABLE		0UL
-#define VIO_IRQ_ENABLE		1UL
-
-struct iommu_table;
-
-/*
- * The vio_dev structure is used to describe virtual I/O devices.
- */
-struct vio_dev {
-	const char *name;
-	const char *type;
-	uint32_t unit_address;
-	unsigned int irq;
-	struct device dev;
-};
-
-struct vio_driver {
-	const struct vio_device_id *id_table;
-	int (*probe)(struct vio_dev *dev, const struct vio_device_id *id);
-	int (*remove)(struct vio_dev *dev);
-	struct device_driver driver;
-};
-
-extern int vio_register_driver(struct vio_driver *drv);
-extern void vio_unregister_driver(struct vio_driver *drv);
-
-extern void __devinit vio_unregister_device(struct vio_dev *dev);
-
-struct device_node;
-
-extern struct vio_dev *vio_register_device_node(
-		struct device_node *node_vdev);
-extern const void *vio_get_attribute(struct vio_dev *vdev, char *which,
-		int *length);
-#ifdef CONFIG_PPC_PSERIES
-extern struct vio_dev *vio_find_node(struct device_node *vnode);
-extern int vio_enable_interrupts(struct vio_dev *dev);
-extern int vio_disable_interrupts(struct vio_dev *dev);
-#else
-static inline int vio_enable_interrupts(struct vio_dev *dev)
-{
-	return 0;
-}
-#endif
-
-static inline struct vio_driver *to_vio_driver(struct device_driver *drv)
-{
-	return container_of(drv, struct vio_driver, driver);
-}
-
-static inline struct vio_dev *to_vio_dev(struct device *dev)
-{
-	return container_of(dev, struct vio_dev, dev);
-}
-
-#endif /* __KERNEL__ */
-#endif /* _ASM_POWERPC_VIO_H */
diff --git a/include/asm-s390/Kbuild b/include/asm-s390/Kbuild
deleted file mode 100644
index bb5e9edb9825..000000000000
--- a/include/asm-s390/Kbuild
+++ /dev/null
@@ -1,16 +0,0 @@
-include include/asm-generic/Kbuild.asm
-
-header-y += dasd.h
-header-y += monwriter.h
-header-y += qeth.h
-header-y += tape390.h
-header-y += ucontext.h
-header-y += vtoc.h
-header-y += zcrypt.h
-header-y += kvm.h
-header-y += chsc.h
-
-unifdef-y += cmb.h
-unifdef-y += debug.h
-unifdef-y += chpid.h
-unifdef-y += schid.h
diff --git a/include/asm-s390/bitops.h b/include/asm-s390/bitops.h
deleted file mode 100644
index b4eb24ab5af9..000000000000
--- a/include/asm-s390/bitops.h
+++ /dev/null
@@ -1,884 +0,0 @@
-#ifndef _S390_BITOPS_H
-#define _S390_BITOPS_H
-
-/*
- *  include/asm-s390/bitops.h
- *
- *  S390 version
- *    Copyright (C) 1999 IBM Deutschland Entwicklung GmbH, IBM Corporation
- *    Author(s): Martin Schwidefsky (schwidefsky@de.ibm.com)
- *
- *  Derived from "include/asm-i386/bitops.h"
- *    Copyright (C) 1992, Linus Torvalds
- *
- */
-
-#ifdef __KERNEL__
-
-#ifndef _LINUX_BITOPS_H
-#error only <linux/bitops.h> can be included directly
-#endif
-
-#include <linux/compiler.h>
-
-/*
- * 32 bit bitops format:
- * bit 0 is the LSB of *addr; bit 31 is the MSB of *addr;
- * bit 32 is the LSB of *(addr+4). That combined with the
- * big endian byte order on S390 give the following bit
- * order in memory:
- *    1f 1e 1d 1c 1b 1a 19 18 17 16 15 14 13 12 11 10 \
- *    0f 0e 0d 0c 0b 0a 09 08 07 06 05 04 03 02 01 00
- * after that follows the next long with bit numbers
- *    3f 3e 3d 3c 3b 3a 39 38 37 36 35 34 33 32 31 30
- *    2f 2e 2d 2c 2b 2a 29 28 27 26 25 24 23 22 21 20
- * The reason for this bit ordering is the fact that
- * in the architecture independent code bits operations
- * of the form "flags |= (1 << bitnr)" are used INTERMIXED
- * with operation of the form "set_bit(bitnr, flags)".
- *
- * 64 bit bitops format:
- * bit 0 is the LSB of *addr; bit 63 is the MSB of *addr;
- * bit 64 is the LSB of *(addr+8). That combined with the
- * big endian byte order on S390 give the following bit
- * order in memory:
- *    3f 3e 3d 3c 3b 3a 39 38 37 36 35 34 33 32 31 30
- *    2f 2e 2d 2c 2b 2a 29 28 27 26 25 24 23 22 21 20
- *    1f 1e 1d 1c 1b 1a 19 18 17 16 15 14 13 12 11 10
- *    0f 0e 0d 0c 0b 0a 09 08 07 06 05 04 03 02 01 00
- * after that follows the next long with bit numbers
- *    7f 7e 7d 7c 7b 7a 79 78 77 76 75 74 73 72 71 70
- *    6f 6e 6d 6c 6b 6a 69 68 67 66 65 64 63 62 61 60
- *    5f 5e 5d 5c 5b 5a 59 58 57 56 55 54 53 52 51 50
- *    4f 4e 4d 4c 4b 4a 49 48 47 46 45 44 43 42 41 40
- * The reason for this bit ordering is the fact that
- * in the architecture independent code bits operations
- * of the form "flags |= (1 << bitnr)" are used INTERMIXED
- * with operation of the form "set_bit(bitnr, flags)".
- */
-
-/* bitmap tables from arch/S390/kernel/bitmap.S */
-extern const char _oi_bitmap[];
-extern const char _ni_bitmap[];
-extern const char _zb_findmap[];
-extern const char _sb_findmap[];
-
-#ifndef __s390x__
-
-#define __BITOPS_ALIGN		3
-#define __BITOPS_WORDSIZE	32
-#define __BITOPS_OR		"or"
-#define __BITOPS_AND		"nr"
-#define __BITOPS_XOR		"xr"
-
-#if __GNUC__ > 3 || (__GNUC__ == 3 && __GNUC_MINOR__ > 2)
-
-#define __BITOPS_LOOP(__old, __new, __addr, __val, __op_string)	\
-	asm volatile(						\
-		"	l	%0,%2\n"			\
-		"0:	lr	%1,%0\n"			\
-		__op_string "	%1,%3\n"			\
-		"	cs	%0,%1,%2\n"			\
-		"	jl	0b"				\
-		: "=&d" (__old), "=&d" (__new),			\
-		  "=Q" (*(unsigned long *) __addr)		\
-		: "d" (__val), "Q" (*(unsigned long *) __addr)	\
-		: "cc");
-
-#else /* __GNUC__ */
-
-#define __BITOPS_LOOP(__old, __new, __addr, __val, __op_string)	\
-	asm volatile(						\
-		"	l	%0,0(%4)\n"			\
-		"0:	lr	%1,%0\n"			\
-		__op_string "	%1,%3\n"			\
-		"	cs	%0,%1,0(%4)\n"			\
-		"	jl	0b"				\
-		: "=&d" (__old), "=&d" (__new),			\
-		  "=m" (*(unsigned long *) __addr)		\
-		: "d" (__val), "a" (__addr),			\
-		  "m" (*(unsigned long *) __addr) : "cc");
-
-#endif /* __GNUC__ */
-
-#else /* __s390x__ */
-
-#define __BITOPS_ALIGN		7
-#define __BITOPS_WORDSIZE	64
-#define __BITOPS_OR		"ogr"
-#define __BITOPS_AND		"ngr"
-#define __BITOPS_XOR		"xgr"
-
-#if __GNUC__ > 3 || (__GNUC__ == 3 && __GNUC_MINOR__ > 2)
-
-#define __BITOPS_LOOP(__old, __new, __addr, __val, __op_string)	\
-	asm volatile(						\
-		"	lg	%0,%2\n"			\
-		"0:	lgr	%1,%0\n"			\
-		__op_string "	%1,%3\n"			\
-		"	csg	%0,%1,%2\n"			\
-		"	jl	0b"				\
-		: "=&d" (__old), "=&d" (__new),			\
-		  "=Q" (*(unsigned long *) __addr)		\
-		: "d" (__val), "Q" (*(unsigned long *) __addr)	\
-		: "cc");
-
-#else /* __GNUC__ */
-
-#define __BITOPS_LOOP(__old, __new, __addr, __val, __op_string)	\
-	asm volatile(						\
-		"	lg	%0,0(%4)\n"			\
-		"0:	lgr	%1,%0\n"			\
-		__op_string "	%1,%3\n"			\
-		"	csg	%0,%1,0(%4)\n"			\
-		"	jl	0b"				\
-		: "=&d" (__old), "=&d" (__new),			\
-		  "=m" (*(unsigned long *) __addr)		\
-		: "d" (__val), "a" (__addr),			\
-		  "m" (*(unsigned long *) __addr) : "cc");
-
-
-#endif /* __GNUC__ */
-
-#endif /* __s390x__ */
-
-#define __BITOPS_WORDS(bits) (((bits)+__BITOPS_WORDSIZE-1)/__BITOPS_WORDSIZE)
-#define __BITOPS_BARRIER() asm volatile("" : : : "memory")
-
-#ifdef CONFIG_SMP
-/*
- * SMP safe set_bit routine based on compare and swap (CS)
- */
-static inline void set_bit_cs(unsigned long nr, volatile unsigned long *ptr)
-{
-        unsigned long addr, old, new, mask;
-
-	addr = (unsigned long) ptr;
-	/* calculate address for CS */
-	addr += (nr ^ (nr & (__BITOPS_WORDSIZE - 1))) >> 3;
-	/* make OR mask */
-	mask = 1UL << (nr & (__BITOPS_WORDSIZE - 1));
-	/* Do the atomic update. */
-	__BITOPS_LOOP(old, new, addr, mask, __BITOPS_OR);
-}
-
-/*
- * SMP safe clear_bit routine based on compare and swap (CS)
- */
-static inline void clear_bit_cs(unsigned long nr, volatile unsigned long *ptr)
-{
-        unsigned long addr, old, new, mask;
-
-	addr = (unsigned long) ptr;
-	/* calculate address for CS */
-	addr += (nr ^ (nr & (__BITOPS_WORDSIZE - 1))) >> 3;
-	/* make AND mask */
-	mask = ~(1UL << (nr & (__BITOPS_WORDSIZE - 1)));
-	/* Do the atomic update. */
-	__BITOPS_LOOP(old, new, addr, mask, __BITOPS_AND);
-}
-
-/*
- * SMP safe change_bit routine based on compare and swap (CS)
- */
-static inline void change_bit_cs(unsigned long nr, volatile unsigned long *ptr)
-{
-        unsigned long addr, old, new, mask;
-
-	addr = (unsigned long) ptr;
-	/* calculate address for CS */
-	addr += (nr ^ (nr & (__BITOPS_WORDSIZE - 1))) >> 3;
-	/* make XOR mask */
-	mask = 1UL << (nr & (__BITOPS_WORDSIZE - 1));
-	/* Do the atomic update. */
-	__BITOPS_LOOP(old, new, addr, mask, __BITOPS_XOR);
-}
-
-/*
- * SMP safe test_and_set_bit routine based on compare and swap (CS)
- */
-static inline int
-test_and_set_bit_cs(unsigned long nr, volatile unsigned long *ptr)
-{
-        unsigned long addr, old, new, mask;
-
-	addr = (unsigned long) ptr;
-	/* calculate address for CS */
-	addr += (nr ^ (nr & (__BITOPS_WORDSIZE - 1))) >> 3;
-	/* make OR/test mask */
-	mask = 1UL << (nr & (__BITOPS_WORDSIZE - 1));
-	/* Do the atomic update. */
-	__BITOPS_LOOP(old, new, addr, mask, __BITOPS_OR);
-	__BITOPS_BARRIER();
-	return (old & mask) != 0;
-}
-
-/*
- * SMP safe test_and_clear_bit routine based on compare and swap (CS)
- */
-static inline int
-test_and_clear_bit_cs(unsigned long nr, volatile unsigned long *ptr)
-{
-        unsigned long addr, old, new, mask;
-
-	addr = (unsigned long) ptr;
-	/* calculate address for CS */
-	addr += (nr ^ (nr & (__BITOPS_WORDSIZE - 1))) >> 3;
-	/* make AND/test mask */
-	mask = ~(1UL << (nr & (__BITOPS_WORDSIZE - 1)));
-	/* Do the atomic update. */
-	__BITOPS_LOOP(old, new, addr, mask, __BITOPS_AND);
-	__BITOPS_BARRIER();
-	return (old ^ new) != 0;
-}
-
-/*
- * SMP safe test_and_change_bit routine based on compare and swap (CS) 
- */
-static inline int
-test_and_change_bit_cs(unsigned long nr, volatile unsigned long *ptr)
-{
-        unsigned long addr, old, new, mask;
-
-	addr = (unsigned long) ptr;
-	/* calculate address for CS */
-	addr += (nr ^ (nr & (__BITOPS_WORDSIZE - 1))) >> 3;
-	/* make XOR/test mask */
-	mask = 1UL << (nr & (__BITOPS_WORDSIZE - 1));
-	/* Do the atomic update. */
-	__BITOPS_LOOP(old, new, addr, mask, __BITOPS_XOR);
-	__BITOPS_BARRIER();
-	return (old & mask) != 0;
-}
-#endif /* CONFIG_SMP */
-
-/*
- * fast, non-SMP set_bit routine
- */
-static inline void __set_bit(unsigned long nr, volatile unsigned long *ptr)
-{
-	unsigned long addr;
-
-	addr = (unsigned long) ptr + ((nr ^ (__BITOPS_WORDSIZE - 8)) >> 3);
-	asm volatile(
-		"	oc	0(1,%1),0(%2)"
-		: "=m" (*(char *) addr) : "a" (addr),
-		  "a" (_oi_bitmap + (nr & 7)), "m" (*(char *) addr) : "cc" );
-}
-
-static inline void 
-__constant_set_bit(const unsigned long nr, volatile unsigned long *ptr)
-{
-	unsigned long addr;
-
-	addr = ((unsigned long) ptr) + ((nr ^ (__BITOPS_WORDSIZE - 8)) >> 3);
-	*(unsigned char *) addr |= 1 << (nr & 7);
-}
-
-#define set_bit_simple(nr,addr) \
-(__builtin_constant_p((nr)) ? \
- __constant_set_bit((nr),(addr)) : \
- __set_bit((nr),(addr)) )
-
-/*
- * fast, non-SMP clear_bit routine
- */
-static inline void 
-__clear_bit(unsigned long nr, volatile unsigned long *ptr)
-{
-	unsigned long addr;
-
-	addr = (unsigned long) ptr + ((nr ^ (__BITOPS_WORDSIZE - 8)) >> 3);
-	asm volatile(
-		"	nc	0(1,%1),0(%2)"
-		: "=m" (*(char *) addr)	: "a" (addr),
-		  "a" (_ni_bitmap + (nr & 7)), "m" (*(char *) addr) : "cc");
-}
-
-static inline void 
-__constant_clear_bit(const unsigned long nr, volatile unsigned long *ptr)
-{
-	unsigned long addr;
-
-	addr = ((unsigned long) ptr) + ((nr ^ (__BITOPS_WORDSIZE - 8)) >> 3);
-	*(unsigned char *) addr &= ~(1 << (nr & 7));
-}
-
-#define clear_bit_simple(nr,addr) \
-(__builtin_constant_p((nr)) ? \
- __constant_clear_bit((nr),(addr)) : \
- __clear_bit((nr),(addr)) )
-
-/* 
- * fast, non-SMP change_bit routine 
- */
-static inline void __change_bit(unsigned long nr, volatile unsigned long *ptr)
-{
-	unsigned long addr;
-
-	addr = (unsigned long) ptr + ((nr ^ (__BITOPS_WORDSIZE - 8)) >> 3);
-	asm volatile(
-		"	xc	0(1,%1),0(%2)"
-		:  "=m" (*(char *) addr) : "a" (addr),
-		   "a" (_oi_bitmap + (nr & 7)), "m" (*(char *) addr) : "cc" );
-}
-
-static inline void 
-__constant_change_bit(const unsigned long nr, volatile unsigned long *ptr) 
-{
-	unsigned long addr;
-
-	addr = ((unsigned long) ptr) + ((nr ^ (__BITOPS_WORDSIZE - 8)) >> 3);
-	*(unsigned char *) addr ^= 1 << (nr & 7);
-}
-
-#define change_bit_simple(nr,addr) \
-(__builtin_constant_p((nr)) ? \
- __constant_change_bit((nr),(addr)) : \
- __change_bit((nr),(addr)) )
-
-/*
- * fast, non-SMP test_and_set_bit routine
- */
-static inline int
-test_and_set_bit_simple(unsigned long nr, volatile unsigned long *ptr)
-{
-	unsigned long addr;
-	unsigned char ch;
-
-	addr = (unsigned long) ptr + ((nr ^ (__BITOPS_WORDSIZE - 8)) >> 3);
-	ch = *(unsigned char *) addr;
-	asm volatile(
-		"	oc	0(1,%1),0(%2)"
-		: "=m" (*(char *) addr)
-		: "a" (addr), "a" (_oi_bitmap + (nr & 7)),
-		  "m" (*(char *) addr) : "cc", "memory");
-	return (ch >> (nr & 7)) & 1;
-}
-#define __test_and_set_bit(X,Y)		test_and_set_bit_simple(X,Y)
-
-/*
- * fast, non-SMP test_and_clear_bit routine
- */
-static inline int
-test_and_clear_bit_simple(unsigned long nr, volatile unsigned long *ptr)
-{
-	unsigned long addr;
-	unsigned char ch;
-
-	addr = (unsigned long) ptr + ((nr ^ (__BITOPS_WORDSIZE - 8)) >> 3);
-	ch = *(unsigned char *) addr;
-	asm volatile(
-		"	nc	0(1,%1),0(%2)"
-		: "=m" (*(char *) addr)
-		: "a" (addr), "a" (_ni_bitmap + (nr & 7)),
-		  "m" (*(char *) addr) : "cc", "memory");
-	return (ch >> (nr & 7)) & 1;
-}
-#define __test_and_clear_bit(X,Y)	test_and_clear_bit_simple(X,Y)
-
-/*
- * fast, non-SMP test_and_change_bit routine
- */
-static inline int
-test_and_change_bit_simple(unsigned long nr, volatile unsigned long *ptr)
-{
-	unsigned long addr;
-	unsigned char ch;
-
-	addr = (unsigned long) ptr + ((nr ^ (__BITOPS_WORDSIZE - 8)) >> 3);
-	ch = *(unsigned char *) addr;
-	asm volatile(
-		"	xc	0(1,%1),0(%2)"
-		: "=m" (*(char *) addr)
-		: "a" (addr), "a" (_oi_bitmap + (nr & 7)),
-		  "m" (*(char *) addr) : "cc", "memory");
-	return (ch >> (nr & 7)) & 1;
-}
-#define __test_and_change_bit(X,Y)	test_and_change_bit_simple(X,Y)
-
-#ifdef CONFIG_SMP
-#define set_bit             set_bit_cs
-#define clear_bit           clear_bit_cs
-#define change_bit          change_bit_cs
-#define test_and_set_bit    test_and_set_bit_cs
-#define test_and_clear_bit  test_and_clear_bit_cs
-#define test_and_change_bit test_and_change_bit_cs
-#else
-#define set_bit             set_bit_simple
-#define clear_bit           clear_bit_simple
-#define change_bit          change_bit_simple
-#define test_and_set_bit    test_and_set_bit_simple
-#define test_and_clear_bit  test_and_clear_bit_simple
-#define test_and_change_bit test_and_change_bit_simple
-#endif
-
-
-/*
- * This routine doesn't need to be atomic.
- */
-
-static inline int __test_bit(unsigned long nr, const volatile unsigned long *ptr)
-{
-	unsigned long addr;
-	unsigned char ch;
-
-	addr = (unsigned long) ptr + ((nr ^ (__BITOPS_WORDSIZE - 8)) >> 3);
-	ch = *(volatile unsigned char *) addr;
-	return (ch >> (nr & 7)) & 1;
-}
-
-static inline int 
-__constant_test_bit(unsigned long nr, const volatile unsigned long *addr) {
-    return (((volatile char *) addr)
-	    [(nr^(__BITOPS_WORDSIZE-8))>>3] & (1<<(nr&7))) != 0;
-}
-
-#define test_bit(nr,addr) \
-(__builtin_constant_p((nr)) ? \
- __constant_test_bit((nr),(addr)) : \
- __test_bit((nr),(addr)) )
-
-/*
- * Optimized find bit helper functions.
- */
-
-/**
- * __ffz_word_loop - find byte offset of first long != -1UL
- * @addr: pointer to array of unsigned long
- * @size: size of the array in bits
- */
-static inline unsigned long __ffz_word_loop(const unsigned long *addr,
-					    unsigned long size)
-{
-	typedef struct { long _[__BITOPS_WORDS(size)]; } addrtype;
-	unsigned long bytes = 0;
-
-	asm volatile(
-#ifndef __s390x__
-		"	ahi	%1,-1\n"
-		"	sra	%1,5\n"
-		"	jz	1f\n"
-		"0:	c	%2,0(%0,%3)\n"
-		"	jne	1f\n"
-		"	la	%0,4(%0)\n"
-		"	brct	%1,0b\n"
-		"1:\n"
-#else
-		"	aghi	%1,-1\n"
-		"	srag	%1,%1,6\n"
-		"	jz	1f\n"
-		"0:	cg	%2,0(%0,%3)\n"
-		"	jne	1f\n"
-		"	la	%0,8(%0)\n"
-		"	brct	%1,0b\n"
-		"1:\n"
-#endif
-		: "+&a" (bytes), "+&d" (size)
-		: "d" (-1UL), "a" (addr), "m" (*(addrtype *) addr)
-		: "cc" );
-	return bytes;
-}
-
-/**
- * __ffs_word_loop - find byte offset of first long != 0UL
- * @addr: pointer to array of unsigned long
- * @size: size of the array in bits
- */
-static inline unsigned long __ffs_word_loop(const unsigned long *addr,
-					    unsigned long size)
-{
-	typedef struct { long _[__BITOPS_WORDS(size)]; } addrtype;
-	unsigned long bytes = 0;
-
-	asm volatile(
-#ifndef __s390x__
-		"	ahi	%1,-1\n"
-		"	sra	%1,5\n"
-		"	jz	1f\n"
-		"0:	c	%2,0(%0,%3)\n"
-		"	jne	1f\n"
-		"	la	%0,4(%0)\n"
-		"	brct	%1,0b\n"
-		"1:\n"
-#else
-		"	aghi	%1,-1\n"
-		"	srag	%1,%1,6\n"
-		"	jz	1f\n"
-		"0:	cg	%2,0(%0,%3)\n"
-		"	jne	1f\n"
-		"	la	%0,8(%0)\n"
-		"	brct	%1,0b\n"
-		"1:\n"
-#endif
-		: "+&a" (bytes), "+&a" (size)
-		: "d" (0UL), "a" (addr), "m" (*(addrtype *) addr)
-		: "cc" );
-	return bytes;
-}
-
-/**
- * __ffz_word - add number of the first unset bit
- * @nr: base value the bit number is added to
- * @word: the word that is searched for unset bits
- */
-static inline unsigned long __ffz_word(unsigned long nr, unsigned long word)
-{
-#ifdef __s390x__
-	if (likely((word & 0xffffffff) == 0xffffffff)) {
-		word >>= 32;
-		nr += 32;
-	}
-#endif
-	if (likely((word & 0xffff) == 0xffff)) {
-		word >>= 16;
-		nr += 16;
-	}
-	if (likely((word & 0xff) == 0xff)) {
-		word >>= 8;
-		nr += 8;
-	}
-	return nr + _zb_findmap[(unsigned char) word];
-}
-
-/**
- * __ffs_word - add number of the first set bit
- * @nr: base value the bit number is added to
- * @word: the word that is searched for set bits
- */
-static inline unsigned long __ffs_word(unsigned long nr, unsigned long word)
-{
-#ifdef __s390x__
-	if (likely((word & 0xffffffff) == 0)) {
-		word >>= 32;
-		nr += 32;
-	}
-#endif
-	if (likely((word & 0xffff) == 0)) {
-		word >>= 16;
-		nr += 16;
-	}
-	if (likely((word & 0xff) == 0)) {
-		word >>= 8;
-		nr += 8;
-	}
-	return nr + _sb_findmap[(unsigned char) word];
-}
-
-
-/**
- * __load_ulong_be - load big endian unsigned long
- * @p: pointer to array of unsigned long
- * @offset: byte offset of source value in the array
- */
-static inline unsigned long __load_ulong_be(const unsigned long *p,
-					    unsigned long offset)
-{
-	p = (unsigned long *)((unsigned long) p + offset);
-	return *p;
-}
-
-/**
- * __load_ulong_le - load little endian unsigned long
- * @p: pointer to array of unsigned long
- * @offset: byte offset of source value in the array
- */
-static inline unsigned long __load_ulong_le(const unsigned long *p,
-					    unsigned long offset)
-{
-	unsigned long word;
-
-	p = (unsigned long *)((unsigned long) p + offset);
-#ifndef __s390x__
-	asm volatile(
-		"	ic	%0,0(%1)\n"
-		"	icm	%0,2,1(%1)\n"
-		"	icm	%0,4,2(%1)\n"
-		"	icm	%0,8,3(%1)"
-		: "=&d" (word) : "a" (p), "m" (*p) : "cc");
-#else
-	asm volatile(
-		"	lrvg	%0,%1"
-		: "=d" (word) : "m" (*p) );
-#endif
-	return word;
-}
-
-/*
- * The various find bit functions.
- */
-
-/*
- * ffz - find first zero in word.
- * @word: The word to search
- *
- * Undefined if no zero exists, so code should check against ~0UL first.
- */
-static inline unsigned long ffz(unsigned long word)
-{
-	return __ffz_word(0, word);
-}
-
-/**
- * __ffs - find first bit in word.
- * @word: The word to search
- *
- * Undefined if no bit exists, so code should check against 0 first.
- */
-static inline unsigned long __ffs (unsigned long word)
-{
-	return __ffs_word(0, word);
-}
-
-/**
- * ffs - find first bit set
- * @x: the word to search
- *
- * This is defined the same way as
- * the libc and compiler builtin ffs routines, therefore
- * differs in spirit from the above ffz (man ffs).
- */
-static inline int ffs(int x)
-{
-	if (!x)
-		return 0;
-	return __ffs_word(1, x);
-}
-
-/**
- * find_first_zero_bit - find the first zero bit in a memory region
- * @addr: The address to start the search at
- * @size: The maximum size to search
- *
- * Returns the bit-number of the first zero bit, not the number of the byte
- * containing a bit.
- */
-static inline unsigned long find_first_zero_bit(const unsigned long *addr,
-						unsigned long size)
-{
-	unsigned long bytes, bits;
-
-        if (!size)
-                return 0;
-	bytes = __ffz_word_loop(addr, size);
-	bits = __ffz_word(bytes*8, __load_ulong_be(addr, bytes));
-	return (bits < size) ? bits : size;
-}
-
-/**
- * find_first_bit - find the first set bit in a memory region
- * @addr: The address to start the search at
- * @size: The maximum size to search
- *
- * Returns the bit-number of the first set bit, not the number of the byte
- * containing a bit.
- */
-static inline unsigned long find_first_bit(const unsigned long * addr,
-					   unsigned long size)
-{
-	unsigned long bytes, bits;
-
-        if (!size)
-                return 0;
-	bytes = __ffs_word_loop(addr, size);
-	bits = __ffs_word(bytes*8, __load_ulong_be(addr, bytes));
-	return (bits < size) ? bits : size;
-}
-
-/**
- * find_next_zero_bit - find the first zero bit in a memory region
- * @addr: The address to base the search on
- * @offset: The bitnumber to start searching at
- * @size: The maximum size to search
- */
-static inline int find_next_zero_bit (const unsigned long * addr,
-				      unsigned long size,
-				      unsigned long offset)
-{
-        const unsigned long *p;
-	unsigned long bit, set;
-
-	if (offset >= size)
-		return size;
-	bit = offset & (__BITOPS_WORDSIZE - 1);
-	offset -= bit;
-	size -= offset;
-	p = addr + offset / __BITOPS_WORDSIZE;
-	if (bit) {
-		/*
-		 * __ffz_word returns __BITOPS_WORDSIZE
-		 * if no zero bit is present in the word.
-		 */
-		set = __ffz_word(0, *p >> bit) + bit;
-		if (set >= size)
-			return size + offset;
-		if (set < __BITOPS_WORDSIZE)
-			return set + offset;
-		offset += __BITOPS_WORDSIZE;
-		size -= __BITOPS_WORDSIZE;
-		p++;
-	}
-	return offset + find_first_zero_bit(p, size);
-}
-
-/**
- * find_next_bit - find the first set bit in a memory region
- * @addr: The address to base the search on
- * @offset: The bitnumber to start searching at
- * @size: The maximum size to search
- */
-static inline int find_next_bit (const unsigned long * addr,
-				 unsigned long size,
-				 unsigned long offset)
-{
-        const unsigned long *p;
-	unsigned long bit, set;
-
-	if (offset >= size)
-		return size;
-	bit = offset & (__BITOPS_WORDSIZE - 1);
-	offset -= bit;
-	size -= offset;
-	p = addr + offset / __BITOPS_WORDSIZE;
-	if (bit) {
-		/*
-		 * __ffs_word returns __BITOPS_WORDSIZE
-		 * if no one bit is present in the word.
-		 */
-		set = __ffs_word(0, *p & (~0UL << bit));
-		if (set >= size)
-			return size + offset;
-		if (set < __BITOPS_WORDSIZE)
-			return set + offset;
-		offset += __BITOPS_WORDSIZE;
-		size -= __BITOPS_WORDSIZE;
-		p++;
-	}
-	return offset + find_first_bit(p, size);
-}
-
-/*
- * Every architecture must define this function. It's the fastest
- * way of searching a 140-bit bitmap where the first 100 bits are
- * unlikely to be set. It's guaranteed that at least one of the 140
- * bits is cleared.
- */
-static inline int sched_find_first_bit(unsigned long *b)
-{
-	return find_first_bit(b, 140);
-}
-
-#include <asm-generic/bitops/fls.h>
-#include <asm-generic/bitops/__fls.h>
-#include <asm-generic/bitops/fls64.h>
-
-#include <asm-generic/bitops/hweight.h>
-#include <asm-generic/bitops/lock.h>
-
-/*
- * ATTENTION: intel byte ordering convention for ext2 and minix !!
- * bit 0 is the LSB of addr; bit 31 is the MSB of addr;
- * bit 32 is the LSB of (addr+4).
- * That combined with the little endian byte order of Intel gives the
- * following bit order in memory:
- *    07 06 05 04 03 02 01 00 15 14 13 12 11 10 09 08 \
- *    23 22 21 20 19 18 17 16 31 30 29 28 27 26 25 24
- */
-
-#define ext2_set_bit(nr, addr)       \
-	__test_and_set_bit((nr)^(__BITOPS_WORDSIZE - 8), (unsigned long *)addr)
-#define ext2_set_bit_atomic(lock, nr, addr)       \
-	test_and_set_bit((nr)^(__BITOPS_WORDSIZE - 8), (unsigned long *)addr)
-#define ext2_clear_bit(nr, addr)     \
-	__test_and_clear_bit((nr)^(__BITOPS_WORDSIZE - 8), (unsigned long *)addr)
-#define ext2_clear_bit_atomic(lock, nr, addr)     \
-	test_and_clear_bit((nr)^(__BITOPS_WORDSIZE - 8), (unsigned long *)addr)
-#define ext2_test_bit(nr, addr)      \
-	test_bit((nr)^(__BITOPS_WORDSIZE - 8), (unsigned long *)addr)
-
-static inline int ext2_find_first_zero_bit(void *vaddr, unsigned int size)
-{
-	unsigned long bytes, bits;
-
-        if (!size)
-                return 0;
-	bytes = __ffz_word_loop(vaddr, size);
-	bits = __ffz_word(bytes*8, __load_ulong_le(vaddr, bytes));
-	return (bits < size) ? bits : size;
-}
-
-static inline int ext2_find_next_zero_bit(void *vaddr, unsigned long size,
-					  unsigned long offset)
-{
-        unsigned long *addr = vaddr, *p;
-	unsigned long bit, set;
-
-        if (offset >= size)
-                return size;
-	bit = offset & (__BITOPS_WORDSIZE - 1);
-	offset -= bit;
-	size -= offset;
-	p = addr + offset / __BITOPS_WORDSIZE;
-        if (bit) {
-		/*
-		 * s390 version of ffz returns __BITOPS_WORDSIZE
-		 * if no zero bit is present in the word.
-		 */
-		set = ffz(__load_ulong_le(p, 0) >> bit) + bit;
-		if (set >= size)
-			return size + offset;
-		if (set < __BITOPS_WORDSIZE)
-			return set + offset;
-		offset += __BITOPS_WORDSIZE;
-		size -= __BITOPS_WORDSIZE;
-		p++;
-        }
-	return offset + ext2_find_first_zero_bit(p, size);
-}
-
-static inline unsigned long ext2_find_first_bit(void *vaddr,
-						unsigned long size)
-{
-	unsigned long bytes, bits;
-
-	if (!size)
-		return 0;
-	bytes = __ffs_word_loop(vaddr, size);
-	bits = __ffs_word(bytes*8, __load_ulong_le(vaddr, bytes));
-	return (bits < size) ? bits : size;
-}
-
-static inline int ext2_find_next_bit(void *vaddr, unsigned long size,
-				     unsigned long offset)
-{
-	unsigned long *addr = vaddr, *p;
-	unsigned long bit, set;
-
-	if (offset >= size)
-		return size;
-	bit = offset & (__BITOPS_WORDSIZE - 1);
-	offset -= bit;
-	size -= offset;
-	p = addr + offset / __BITOPS_WORDSIZE;
-	if (bit) {
-		/*
-		 * s390 version of ffz returns __BITOPS_WORDSIZE
-		 * if no zero bit is present in the word.
-		 */
-		set = ffs(__load_ulong_le(p, 0) >> bit) + bit;
-		if (set >= size)
-			return size + offset;
-		if (set < __BITOPS_WORDSIZE)
-			return set + offset;
-		offset += __BITOPS_WORDSIZE;
-		size -= __BITOPS_WORDSIZE;
-		p++;
-	}
-	return offset + ext2_find_first_bit(p, size);
-}
-
-#include <asm-generic/bitops/minix.h>
-
-#endif /* __KERNEL__ */
-
-#endif /* _S390_BITOPS_H */
diff --git a/include/asm-s390/hardirq.h b/include/asm-s390/hardirq.h
deleted file mode 100644
index 4b7cb964ff35..000000000000
--- a/include/asm-s390/hardirq.h
+++ /dev/null
@@ -1,37 +0,0 @@
-/*
- *  include/asm-s390/hardirq.h
- *
- *  S390 version
- *    Copyright (C) 1999,2000 IBM Deutschland Entwicklung GmbH, IBM Corporation
- *    Author(s): Martin Schwidefsky (schwidefsky@de.ibm.com),
- *               Denis Joseph Barrow (djbarrow@de.ibm.com,barrow_dj@yahoo.com)
- *
- *  Derived from "include/asm-i386/hardirq.h"
- */
-
-#ifndef __ASM_HARDIRQ_H
-#define __ASM_HARDIRQ_H
-
-#include <linux/threads.h>
-#include <linux/sched.h>
-#include <linux/cache.h>
-#include <linux/interrupt.h>
-#include <asm/lowcore.h>
-
-/* irq_cpustat_t is unused currently, but could be converted
- * into a percpu variable instead of storing softirq_pending
- * on the lowcore */
-typedef struct {
-	unsigned int __softirq_pending;
-} irq_cpustat_t;
-
-#define local_softirq_pending() (S390_lowcore.softirq_pending)
-
-#define __ARCH_IRQ_STAT
-#define __ARCH_HAS_DO_SOFTIRQ
-
-#define HARDIRQ_BITS	8
-
-void clock_comparator_work(void);
-
-#endif /* __ASM_HARDIRQ_H */
diff --git a/include/asm-s390/kexec.h b/include/asm-s390/kexec.h
deleted file mode 100644
index f219c6411e0b..000000000000
--- a/include/asm-s390/kexec.h
+++ /dev/null
@@ -1,43 +0,0 @@
-/*
- * include/asm-s390/kexec.h
- *
- * (C) Copyright IBM Corp. 2005
- *
- * Author(s): Rolf Adelsberger <adelsberger@de.ibm.com>
- *
- */
-
-#ifndef _S390_KEXEC_H
-#define _S390_KEXEC_H
-
-#ifdef __KERNEL__
-#include <asm/page.h>
-#endif
-#include <asm/processor.h>
-/*
- * KEXEC_SOURCE_MEMORY_LIMIT maximum page get_free_page can return.
- * I.e. Maximum page that is mapped directly into kernel memory,
- * and kmap is not required.
- */
-
-/* Maximum physical address we can use pages from */
-#define KEXEC_SOURCE_MEMORY_LIMIT (-1UL)
-
-/* Maximum address we can reach in physical address mode */
-#define KEXEC_DESTINATION_MEMORY_LIMIT (-1UL)
-
-/* Maximum address we can use for the control pages */
-/* Not more than 2GB */
-#define KEXEC_CONTROL_MEMORY_LIMIT (1UL<<31)
-
-/* Allocate one page for the pdp and the second for the code */
-#define KEXEC_CONTROL_CODE_SIZE 4096
-
-/* The native architecture */
-#define KEXEC_ARCH KEXEC_ARCH_S390
-
-/* Provide a dummy definition to avoid build failures. */
-static inline void crash_setup_regs(struct pt_regs *newregs,
-					struct pt_regs *oldregs) { }
-
-#endif /*_S390_KEXEC_H */
diff --git a/include/asm-s390/namei.h b/include/asm-s390/namei.h
deleted file mode 100644
index 3e286bdde4b0..000000000000
--- a/include/asm-s390/namei.h
+++ /dev/null
@@ -1,21 +0,0 @@
-/*
- *  include/asm-s390/namei.h
- *
- *  S390 version
- *
- *  Derived from "include/asm-i386/namei.h"
- *
- *  Included from linux/fs/namei.c
- */
-
-#ifndef __S390_NAMEI_H
-#define __S390_NAMEI_H
-
-/* This dummy routine maybe changed to something useful
- * for /usr/gnemul/ emulation stuff.
- * Look at asm-sparc/namei.h for details.
- */
-
-#define __emul_prefix() NULL
-
-#endif /* __S390_NAMEI_H */
diff --git a/include/asm-s390/setup.h b/include/asm-s390/setup.h
deleted file mode 100644
index 4ba14e463e83..000000000000
--- a/include/asm-s390/setup.h
+++ /dev/null
@@ -1,141 +0,0 @@
-/*
- *  include/asm-s390/setup.h
- *
- *  S390 version
- *    Copyright IBM Corp. 1999,2006
- */
-
-#ifndef _ASM_S390_SETUP_H
-#define _ASM_S390_SETUP_H
-
-#define COMMAND_LINE_SIZE	1024
-
-#define ARCH_COMMAND_LINE_SIZE	896
-
-#ifdef __KERNEL__
-
-#include <asm/types.h>
-
-#define PARMAREA		0x10400
-#define MEMORY_CHUNKS		256
-
-#ifndef __ASSEMBLY__
-
-#ifndef __s390x__
-#define IPL_DEVICE        (*(unsigned long *)  (0x10404))
-#define INITRD_START      (*(unsigned long *)  (0x1040C))
-#define INITRD_SIZE       (*(unsigned long *)  (0x10414))
-#else /* __s390x__ */
-#define IPL_DEVICE        (*(unsigned long *)  (0x10400))
-#define INITRD_START      (*(unsigned long *)  (0x10408))
-#define INITRD_SIZE       (*(unsigned long *)  (0x10410))
-#endif /* __s390x__ */
-#define COMMAND_LINE      ((char *)            (0x10480))
-
-#define CHUNK_READ_WRITE 0
-#define CHUNK_READ_ONLY  1
-
-struct mem_chunk {
-	unsigned long addr;
-	unsigned long size;
-	int type;
-};
-
-extern struct mem_chunk memory_chunk[];
-extern unsigned long real_memory_size;
-
-void detect_memory_layout(struct mem_chunk chunk[]);
-
-#ifdef CONFIG_S390_SWITCH_AMODE
-extern unsigned int switch_amode;
-#else
-#define switch_amode	(0)
-#endif
-
-#ifdef CONFIG_S390_EXEC_PROTECT
-extern unsigned int s390_noexec;
-#else
-#define s390_noexec	(0)
-#endif
-
-/*
- * Machine features detected in head.S
- */
-extern unsigned long machine_flags;
-
-#define MACHINE_FLAG_VM		(1UL << 0)
-#define MACHINE_FLAG_IEEE	(1UL << 1)
-#define MACHINE_FLAG_P390	(1UL << 2)
-#define MACHINE_FLAG_CSP	(1UL << 3)
-#define MACHINE_FLAG_MVPG	(1UL << 4)
-#define MACHINE_FLAG_DIAG44	(1UL << 5)
-#define MACHINE_FLAG_IDTE	(1UL << 6)
-#define MACHINE_FLAG_DIAG9C	(1UL << 7)
-#define MACHINE_FLAG_MVCOS	(1UL << 8)
-#define MACHINE_FLAG_KVM	(1UL << 9)
-#define MACHINE_FLAG_HPAGE	(1UL << 10)
-#define MACHINE_FLAG_PFMF	(1UL << 11)
-
-#define MACHINE_IS_VM		(machine_flags & MACHINE_FLAG_VM)
-#define MACHINE_IS_KVM		(machine_flags & MACHINE_FLAG_KVM)
-#define MACHINE_HAS_DIAG9C	(machine_flags & MACHINE_FLAG_DIAG9C)
-
-#ifndef __s390x__
-#define MACHINE_HAS_IEEE	(machine_flags & MACHINE_FLAG_IEEE)
-#define MACHINE_HAS_CSP		(machine_flags & MACHINE_FLAG_CSP)
-#define MACHINE_HAS_IDTE	(0)
-#define MACHINE_HAS_DIAG44	(1)
-#define MACHINE_HAS_MVPG	(machine_flags & MACHINE_FLAG_MVPG)
-#define MACHINE_HAS_MVCOS	(0)
-#define MACHINE_HAS_HPAGE	(0)
-#define MACHINE_HAS_PFMF	(0)
-#else /* __s390x__ */
-#define MACHINE_HAS_IEEE	(1)
-#define MACHINE_HAS_CSP		(1)
-#define MACHINE_HAS_IDTE	(machine_flags & MACHINE_FLAG_IDTE)
-#define MACHINE_HAS_DIAG44	(machine_flags & MACHINE_FLAG_DIAG44)
-#define MACHINE_HAS_MVPG	(1)
-#define MACHINE_HAS_MVCOS	(machine_flags & MACHINE_FLAG_MVCOS)
-#define MACHINE_HAS_HPAGE	(machine_flags & MACHINE_FLAG_HPAGE)
-#define MACHINE_HAS_PFMF	(machine_flags & MACHINE_FLAG_PFMF)
-#endif /* __s390x__ */
-
-#define ZFCPDUMP_HSA_SIZE	(32UL<<20)
-
-/*
- * Console mode. Override with conmode=
- */
-extern unsigned int console_mode;
-extern unsigned int console_devno;
-extern unsigned int console_irq;
-
-extern char vmhalt_cmd[];
-extern char vmpoff_cmd[];
-
-#define CONSOLE_IS_UNDEFINED	(console_mode == 0)
-#define CONSOLE_IS_SCLP		(console_mode == 1)
-#define CONSOLE_IS_3215		(console_mode == 2)
-#define CONSOLE_IS_3270		(console_mode == 3)
-#define SET_CONSOLE_SCLP	do { console_mode = 1; } while (0)
-#define SET_CONSOLE_3215	do { console_mode = 2; } while (0)
-#define SET_CONSOLE_3270	do { console_mode = 3; } while (0)
-
-#define NSS_NAME_SIZE	8
-extern char kernel_nss_name[];
-
-#else /* __ASSEMBLY__ */
-
-#ifndef __s390x__
-#define IPL_DEVICE        0x10404
-#define INITRD_START      0x1040C
-#define INITRD_SIZE       0x10414
-#else /* __s390x__ */
-#define IPL_DEVICE        0x10400
-#define INITRD_START      0x10408
-#define INITRD_SIZE       0x10410
-#endif /* __s390x__ */
-#define COMMAND_LINE      0x10480
-
-#endif /* __ASSEMBLY__ */
-#endif /* __KERNEL__ */
-#endif /* _ASM_S390_SETUP_H */
diff --git a/include/asm-s390/thread_info.h b/include/asm-s390/thread_info.h
deleted file mode 100644
index 99bbed99a3b2..000000000000
--- a/include/asm-s390/thread_info.h
+++ /dev/null
@@ -1,121 +0,0 @@
-/*
- *  include/asm-s390/thread_info.h
- *
- *  S390 version
- *    Copyright (C) IBM Corp. 2002,2006
- *    Author(s): Martin Schwidefsky (schwidefsky@de.ibm.com)
- */
-
-#ifndef _ASM_THREAD_INFO_H
-#define _ASM_THREAD_INFO_H
-
-#ifdef __KERNEL__
-
-/*
- * Size of kernel stack for each process
- */
-#ifndef __s390x__
-#ifndef __SMALL_STACK
-#define THREAD_ORDER 1
-#define ASYNC_ORDER  1
-#else
-#define THREAD_ORDER 0
-#define ASYNC_ORDER  0
-#endif
-#else /* __s390x__ */
-#ifndef __SMALL_STACK
-#define THREAD_ORDER 2
-#define ASYNC_ORDER  2
-#else
-#define THREAD_ORDER 1
-#define ASYNC_ORDER  1
-#endif
-#endif /* __s390x__ */
-
-#define THREAD_SIZE (PAGE_SIZE << THREAD_ORDER)
-#define ASYNC_SIZE  (PAGE_SIZE << ASYNC_ORDER)
-
-#ifndef __ASSEMBLY__
-#include <asm/processor.h>
-#include <asm/lowcore.h>
-
-/*
- * low level task data that entry.S needs immediate access to
- * - this struct should fit entirely inside of one cache line
- * - this struct shares the supervisor stack pages
- * - if the contents of this structure are changed, the assembly constants must also be changed
- */
-struct thread_info {
-	struct task_struct	*task;		/* main task structure */
-	struct exec_domain	*exec_domain;	/* execution domain */
-	unsigned long		flags;		/* low level flags */
-	unsigned int		cpu;		/* current CPU */
-	int			preempt_count;	/* 0 => preemptable, <0 => BUG */
-	struct restart_block	restart_block;
-};
-
-/*
- * macros/functions for gaining access to the thread information structure
- */
-#define INIT_THREAD_INFO(tsk)			\
-{						\
-	.task		= &tsk,			\
-	.exec_domain	= &default_exec_domain,	\
-	.flags		= 0,			\
-	.cpu		= 0,			\
-	.preempt_count	= 1,			\
-	.restart_block	= {			\
-		.fn = do_no_restart_syscall,	\
-	},					\
-}
-
-#define init_thread_info	(init_thread_union.thread_info)
-#define init_stack		(init_thread_union.stack)
-
-/* how to get the thread information struct from C */
-static inline struct thread_info *current_thread_info(void)
-{
-	return (struct thread_info *)((*(unsigned long *) __LC_KERNEL_STACK)-THREAD_SIZE);
-}
-
-/* thread information allocation */
-#define alloc_thread_info(tsk) ((struct thread_info *) \
-	__get_free_pages(GFP_KERNEL,THREAD_ORDER))
-#define free_thread_info(ti) free_pages((unsigned long) (ti),THREAD_ORDER)
-
-#endif
-
-/*
- * thread information flags bit numbers
- */
-#define TIF_SYSCALL_TRACE	0	/* syscall trace active */
-#define TIF_SIGPENDING		2	/* signal pending */
-#define TIF_NEED_RESCHED	3	/* rescheduling necessary */
-#define TIF_RESTART_SVC		4	/* restart svc with new svc number */
-#define TIF_SYSCALL_AUDIT	5	/* syscall auditing active */
-#define TIF_SINGLE_STEP		6	/* deliver sigtrap on return to user */
-#define TIF_MCCK_PENDING	7	/* machine check handling is pending */
-#define TIF_USEDFPU		16	/* FPU was used by this task this quantum (SMP) */
-#define TIF_POLLING_NRFLAG	17	/* true if poll_idle() is polling 
-					   TIF_NEED_RESCHED */
-#define TIF_31BIT		18	/* 32bit process */ 
-#define TIF_MEMDIE		19
-#define TIF_RESTORE_SIGMASK	20	/* restore signal mask in do_signal() */
-
-#define _TIF_SYSCALL_TRACE	(1<<TIF_SYSCALL_TRACE)
-#define _TIF_RESTORE_SIGMASK	(1<<TIF_RESTORE_SIGMASK)
-#define _TIF_SIGPENDING		(1<<TIF_SIGPENDING)
-#define _TIF_NEED_RESCHED	(1<<TIF_NEED_RESCHED)
-#define _TIF_RESTART_SVC	(1<<TIF_RESTART_SVC)
-#define _TIF_SYSCALL_AUDIT	(1<<TIF_SYSCALL_AUDIT)
-#define _TIF_SINGLE_STEP	(1<<TIF_SINGLE_STEP)
-#define _TIF_MCCK_PENDING	(1<<TIF_MCCK_PENDING)
-#define _TIF_USEDFPU		(1<<TIF_USEDFPU)
-#define _TIF_POLLING_NRFLAG	(1<<TIF_POLLING_NRFLAG)
-#define _TIF_31BIT		(1<<TIF_31BIT)
-
-#endif /* __KERNEL__ */
-
-#define PREEMPT_ACTIVE		0x4000000
-
-#endif /* _ASM_THREAD_INFO_H */
diff --git a/include/asm-s390/unistd.h b/include/asm-s390/unistd.h
deleted file mode 100644
index 583da807ea97..000000000000
--- a/include/asm-s390/unistd.h
+++ /dev/null
@@ -1,405 +0,0 @@
-/*
- *  include/asm-s390/unistd.h
- *
- *  S390 version
- *
- *  Derived from "include/asm-i386/unistd.h"
- */
-
-#ifndef _ASM_S390_UNISTD_H_
-#define _ASM_S390_UNISTD_H_
-
-/*
- * This file contains the system call numbers.
- */
-
-#define __NR_exit                 1
-#define __NR_fork                 2
-#define __NR_read                 3
-#define __NR_write                4
-#define __NR_open                 5
-#define __NR_close                6
-#define __NR_restart_syscall	  7
-#define __NR_creat                8
-#define __NR_link                 9
-#define __NR_unlink              10
-#define __NR_execve              11
-#define __NR_chdir               12
-#define __NR_mknod               14
-#define __NR_chmod               15
-#define __NR_lseek               19
-#define __NR_getpid              20
-#define __NR_mount               21
-#define __NR_umount              22
-#define __NR_ptrace              26
-#define __NR_alarm               27
-#define __NR_pause               29
-#define __NR_utime               30
-#define __NR_access              33
-#define __NR_nice                34
-#define __NR_sync                36
-#define __NR_kill                37
-#define __NR_rename              38
-#define __NR_mkdir               39
-#define __NR_rmdir               40
-#define __NR_dup                 41
-#define __NR_pipe                42
-#define __NR_times               43
-#define __NR_brk                 45
-#define __NR_signal              48
-#define __NR_acct                51
-#define __NR_umount2             52
-#define __NR_ioctl               54
-#define __NR_fcntl               55
-#define __NR_setpgid             57
-#define __NR_umask               60
-#define __NR_chroot              61
-#define __NR_ustat               62
-#define __NR_dup2                63
-#define __NR_getppid             64
-#define __NR_getpgrp             65
-#define __NR_setsid              66
-#define __NR_sigaction           67
-#define __NR_sigsuspend          72
-#define __NR_sigpending          73
-#define __NR_sethostname         74
-#define __NR_setrlimit           75
-#define __NR_getrusage           77
-#define __NR_gettimeofday        78
-#define __NR_settimeofday        79
-#define __NR_symlink             83
-#define __NR_readlink            85
-#define __NR_uselib              86
-#define __NR_swapon              87
-#define __NR_reboot              88
-#define __NR_readdir             89
-#define __NR_mmap                90
-#define __NR_munmap              91
-#define __NR_truncate            92
-#define __NR_ftruncate           93
-#define __NR_fchmod              94
-#define __NR_getpriority         96
-#define __NR_setpriority         97
-#define __NR_statfs              99
-#define __NR_fstatfs            100
-#define __NR_socketcall         102
-#define __NR_syslog             103
-#define __NR_setitimer          104
-#define __NR_getitimer          105
-#define __NR_stat               106
-#define __NR_lstat              107
-#define __NR_fstat              108
-#define __NR_lookup_dcookie     110
-#define __NR_vhangup            111
-#define __NR_idle               112
-#define __NR_wait4              114
-#define __NR_swapoff            115
-#define __NR_sysinfo            116
-#define __NR_ipc                117
-#define __NR_fsync              118
-#define __NR_sigreturn          119
-#define __NR_clone              120
-#define __NR_setdomainname      121
-#define __NR_uname              122
-#define __NR_adjtimex           124
-#define __NR_mprotect           125
-#define __NR_sigprocmask        126
-#define __NR_create_module      127
-#define __NR_init_module        128
-#define __NR_delete_module      129
-#define __NR_get_kernel_syms    130
-#define __NR_quotactl           131
-#define __NR_getpgid            132
-#define __NR_fchdir             133
-#define __NR_bdflush            134
-#define __NR_sysfs              135
-#define __NR_personality        136
-#define __NR_afs_syscall        137 /* Syscall for Andrew File System */
-#define __NR_getdents           141
-#define __NR_flock              143
-#define __NR_msync              144
-#define __NR_readv              145
-#define __NR_writev             146
-#define __NR_getsid             147
-#define __NR_fdatasync          148
-#define __NR__sysctl            149
-#define __NR_mlock              150
-#define __NR_munlock            151
-#define __NR_mlockall           152
-#define __NR_munlockall         153
-#define __NR_sched_setparam             154
-#define __NR_sched_getparam             155
-#define __NR_sched_setscheduler         156
-#define __NR_sched_getscheduler         157
-#define __NR_sched_yield                158
-#define __NR_sched_get_priority_max     159
-#define __NR_sched_get_priority_min     160
-#define __NR_sched_rr_get_interval      161
-#define __NR_nanosleep          162
-#define __NR_mremap             163
-#define __NR_query_module       167
-#define __NR_poll               168
-#define __NR_nfsservctl         169
-#define __NR_prctl              172
-#define __NR_rt_sigreturn       173
-#define __NR_rt_sigaction       174
-#define __NR_rt_sigprocmask     175
-#define __NR_rt_sigpending      176
-#define __NR_rt_sigtimedwait    177
-#define __NR_rt_sigqueueinfo    178
-#define __NR_rt_sigsuspend      179
-#define __NR_pread64            180
-#define __NR_pwrite64           181
-#define __NR_getcwd             183
-#define __NR_capget             184
-#define __NR_capset             185
-#define __NR_sigaltstack        186
-#define __NR_sendfile           187
-#define __NR_getpmsg		188
-#define __NR_putpmsg		189
-#define __NR_vfork		190
-#define __NR_pivot_root         217
-#define __NR_mincore            218
-#define __NR_madvise            219
-#define __NR_getdents64		220
-#define __NR_readahead		222
-#define __NR_setxattr		224
-#define __NR_lsetxattr		225
-#define __NR_fsetxattr		226
-#define __NR_getxattr		227
-#define __NR_lgetxattr		228
-#define __NR_fgetxattr		229
-#define __NR_listxattr		230
-#define __NR_llistxattr		231
-#define __NR_flistxattr		232
-#define __NR_removexattr	233
-#define __NR_lremovexattr	234
-#define __NR_fremovexattr	235
-#define __NR_gettid		236
-#define __NR_tkill		237
-#define __NR_futex		238
-#define __NR_sched_setaffinity	239
-#define __NR_sched_getaffinity	240
-#define __NR_tgkill		241
-/* Number 242 is reserved for tux */
-#define __NR_io_setup		243
-#define __NR_io_destroy		244
-#define __NR_io_getevents	245
-#define __NR_io_submit		246
-#define __NR_io_cancel		247
-#define __NR_exit_group		248
-#define __NR_epoll_create	249
-#define __NR_epoll_ctl		250
-#define __NR_epoll_wait		251
-#define __NR_set_tid_address	252
-#define __NR_fadvise64		253
-#define __NR_timer_create	254
-#define __NR_timer_settime	(__NR_timer_create+1)
-#define __NR_timer_gettime	(__NR_timer_create+2)
-#define __NR_timer_getoverrun	(__NR_timer_create+3)
-#define __NR_timer_delete	(__NR_timer_create+4)
-#define __NR_clock_settime	(__NR_timer_create+5)
-#define __NR_clock_gettime	(__NR_timer_create+6)
-#define __NR_clock_getres	(__NR_timer_create+7)
-#define __NR_clock_nanosleep	(__NR_timer_create+8)
-/* Number 263 is reserved for vserver */
-#define __NR_statfs64		265
-#define __NR_fstatfs64		266
-#define __NR_remap_file_pages	267
-/* Number 268 is reserved for new sys_mbind */
-/* Number 269 is reserved for new sys_get_mempolicy */
-/* Number 270 is reserved for new sys_set_mempolicy */
-#define __NR_mq_open		271
-#define __NR_mq_unlink		272
-#define __NR_mq_timedsend	273
-#define __NR_mq_timedreceive	274
-#define __NR_mq_notify		275
-#define __NR_mq_getsetattr	276
-#define __NR_kexec_load		277
-#define __NR_add_key		278
-#define __NR_request_key	279
-#define __NR_keyctl		280
-#define __NR_waitid		281
-#define __NR_ioprio_set		282
-#define __NR_ioprio_get		283
-#define __NR_inotify_init	284
-#define __NR_inotify_add_watch	285
-#define __NR_inotify_rm_watch	286
-/* Number 287 is reserved for new sys_migrate_pages */
-#define __NR_openat		288
-#define __NR_mkdirat		289
-#define __NR_mknodat		290
-#define __NR_fchownat		291
-#define __NR_futimesat		292
-#define __NR_unlinkat		294
-#define __NR_renameat		295
-#define __NR_linkat		296
-#define __NR_symlinkat		297
-#define __NR_readlinkat		298
-#define __NR_fchmodat		299
-#define __NR_faccessat		300
-#define __NR_pselect6		301
-#define __NR_ppoll		302
-#define __NR_unshare		303
-#define __NR_set_robust_list	304
-#define __NR_get_robust_list	305
-#define __NR_splice		306
-#define __NR_sync_file_range	307
-#define __NR_tee		308
-#define __NR_vmsplice		309
-/* Number 310 is reserved for new sys_move_pages */
-#define __NR_getcpu		311
-#define __NR_epoll_pwait	312
-#define __NR_utimes		313
-#define __NR_fallocate		314
-#define __NR_utimensat		315
-#define __NR_signalfd		316
-#define __NR_timerfd		317
-#define __NR_eventfd		318
-#define __NR_timerfd_create	319
-#define __NR_timerfd_settime	320
-#define __NR_timerfd_gettime	321
-#define NR_syscalls 322
-
-/* 
- * There are some system calls that are not present on 64 bit, some
- * have a different name although they do the same (e.g. __NR_chown32
- * is __NR_chown on 64 bit).
- */
-#ifndef __s390x__
-
-#define __NR_time		 13
-#define __NR_lchown		 16
-#define __NR_setuid		 23
-#define __NR_getuid		 24
-#define __NR_stime		 25
-#define __NR_setgid		 46
-#define __NR_getgid		 47
-#define __NR_geteuid		 49
-#define __NR_getegid		 50
-#define __NR_setreuid		 70
-#define __NR_setregid		 71
-#define __NR_getrlimit		 76
-#define __NR_getgroups		 80
-#define __NR_setgroups		 81
-#define __NR_fchown		 95
-#define __NR_ioperm		101
-#define __NR_setfsuid		138
-#define __NR_setfsgid		139
-#define __NR__llseek		140
-#define __NR__newselect 	142
-#define __NR_setresuid		164
-#define __NR_getresuid		165
-#define __NR_setresgid		170
-#define __NR_getresgid		171
-#define __NR_chown		182
-#define __NR_ugetrlimit		191	/* SuS compliant getrlimit */
-#define __NR_mmap2		192
-#define __NR_truncate64		193
-#define __NR_ftruncate64	194
-#define __NR_stat64		195
-#define __NR_lstat64		196
-#define __NR_fstat64		197
-#define __NR_lchown32		198
-#define __NR_getuid32		199
-#define __NR_getgid32		200
-#define __NR_geteuid32		201
-#define __NR_getegid32		202
-#define __NR_setreuid32		203
-#define __NR_setregid32		204
-#define __NR_getgroups32	205
-#define __NR_setgroups32	206
-#define __NR_fchown32		207
-#define __NR_setresuid32	208
-#define __NR_getresuid32	209
-#define __NR_setresgid32	210
-#define __NR_getresgid32	211
-#define __NR_chown32		212
-#define __NR_setuid32		213
-#define __NR_setgid32		214
-#define __NR_setfsuid32		215
-#define __NR_setfsgid32		216
-#define __NR_fcntl64		221
-#define __NR_sendfile64		223
-#define __NR_fadvise64_64	264
-#define __NR_fstatat64		293
-
-#else
-
-#define __NR_select		142
-#define __NR_getrlimit		191	/* SuS compliant getrlimit */
-#define __NR_lchown  		198
-#define __NR_getuid  		199
-#define __NR_getgid  		200
-#define __NR_geteuid  		201
-#define __NR_getegid  		202
-#define __NR_setreuid  		203
-#define __NR_setregid  		204
-#define __NR_getgroups  	205
-#define __NR_setgroups  	206
-#define __NR_fchown  		207
-#define __NR_setresuid  	208
-#define __NR_getresuid  	209
-#define __NR_setresgid  	210
-#define __NR_getresgid  	211
-#define __NR_chown  		212
-#define __NR_setuid  		213
-#define __NR_setgid  		214
-#define __NR_setfsuid  		215
-#define __NR_setfsgid  		216
-#define __NR_newfstatat		293
-
-#endif
-
-#ifdef __KERNEL__
-
-#ifndef CONFIG_64BIT
-#define __IGNORE_select
-#else
-#define __IGNORE_time
-#endif
-
-/* Ignore NUMA system calls. Not wired up on s390. */
-#define __IGNORE_mbind
-#define __IGNORE_get_mempolicy
-#define __IGNORE_set_mempolicy
-#define __IGNORE_migrate_pages
-#define __IGNORE_move_pages
-
-#define __ARCH_WANT_IPC_PARSE_VERSION
-#define __ARCH_WANT_OLD_READDIR
-#define __ARCH_WANT_SYS_ALARM
-#define __ARCH_WANT_SYS_GETHOSTNAME
-#define __ARCH_WANT_SYS_PAUSE
-#define __ARCH_WANT_SYS_SIGNAL
-#define __ARCH_WANT_SYS_UTIME
-#define __ARCH_WANT_SYS_SOCKETCALL
-#define __ARCH_WANT_SYS_FADVISE64
-#define __ARCH_WANT_SYS_GETPGRP
-#define __ARCH_WANT_SYS_LLSEEK
-#define __ARCH_WANT_SYS_NICE
-#define __ARCH_WANT_SYS_OLD_GETRLIMIT
-#define __ARCH_WANT_SYS_OLDUMOUNT
-#define __ARCH_WANT_SYS_SIGPENDING
-#define __ARCH_WANT_SYS_SIGPROCMASK
-#define __ARCH_WANT_SYS_RT_SIGACTION
-#define __ARCH_WANT_SYS_RT_SIGSUSPEND
-# ifndef CONFIG_64BIT
-#   define __ARCH_WANT_STAT64
-#   define __ARCH_WANT_SYS_TIME
-# endif
-# ifdef CONFIG_COMPAT
-#   define __ARCH_WANT_COMPAT_SYS_TIME
-#   define __ARCH_WANT_COMPAT_SYS_RT_SIGSUSPEND
-# endif
-
-/*
- * "Conditional" syscalls
- *
- * What we want is __attribute__((weak,alias("sys_ni_syscall"))),
- * but it doesn't work on all toolchains, so we just do it by hand
- */
-#define cond_syscall(x) asm(".weak\t" #x "\n\t.set\t" #x ",sys_ni_syscall")
-
-#endif /* __KERNEL__ */
-#endif /* _ASM_S390_UNISTD_H_ */
diff --git a/include/asm-sh/.gitignore b/include/asm-sh/.gitignore
deleted file mode 100644
index 9218ef82b698..000000000000
--- a/include/asm-sh/.gitignore
+++ /dev/null
@@ -1,3 +0,0 @@
-cpu
-mach
-machtypes.h
diff --git a/include/asm-sh/a.out.h b/include/asm-sh/a.out.h
deleted file mode 100644
index 1f93130e179c..000000000000
--- a/include/asm-sh/a.out.h
+++ /dev/null
@@ -1,20 +0,0 @@
-#ifndef __ASM_SH_A_OUT_H
-#define __ASM_SH_A_OUT_H
-
-struct exec
-{
-  unsigned long a_info;		/* Use macros N_MAGIC, etc for access */
-  unsigned a_text;		/* length of text, in bytes */
-  unsigned a_data;		/* length of data, in bytes */
-  unsigned a_bss;		/* length of uninitialized data area for file, in bytes */
-  unsigned a_syms;		/* length of symbol table data in file, in bytes */
-  unsigned a_entry;		/* start address */
-  unsigned a_trsize;		/* length of relocation info for text, in bytes */
-  unsigned a_drsize;		/* length of relocation info for data, in bytes */
-};
-
-#define N_TRSIZE(a)	((a).a_trsize)
-#define N_DRSIZE(a)	((a).a_drsize)
-#define N_SYMSIZE(a)	((a).a_syms)
-
-#endif /* __ASM_SH_A_OUT_H */
diff --git a/include/asm-sh/addrspace.h b/include/asm-sh/addrspace.h
deleted file mode 100644
index fa544fc38c23..000000000000
--- a/include/asm-sh/addrspace.h
+++ /dev/null
@@ -1,53 +0,0 @@
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 1999 by Kaz Kojima
- *
- * Defitions for the address spaces of the SH CPUs.
- */
-#ifndef __ASM_SH_ADDRSPACE_H
-#define __ASM_SH_ADDRSPACE_H
-
-#ifdef __KERNEL__
-
-#include <asm/cpu/addrspace.h>
-
-/* If this CPU supports segmentation, hook up the helpers */
-#ifdef P1SEG
-
-/*
-   [ P0/U0 (virtual) ]		0x00000000     <------ User space
-   [ P1 (fixed)   cached ]	0x80000000     <------ Kernel space
-   [ P2 (fixed)  non-cachable]	0xA0000000     <------ Physical access
-   [ P3 (virtual) cached]	0xC0000000     <------ vmalloced area
-   [ P4 control   ]		0xE0000000
- */
-
-/* Returns the privileged segment base of a given address  */
-#define PXSEG(a)	(((unsigned long)(a)) & 0xe0000000)
-
-/* Returns the physical address of a PnSEG (n=1,2) address   */
-#define PHYSADDR(a)	(((unsigned long)(a)) & 0x1fffffff)
-
-#ifdef CONFIG_29BIT
-/*
- * Map an address to a certain privileged segment
- */
-#define P1SEGADDR(a)	\
-	((__typeof__(a))(((unsigned long)(a) & 0x1fffffff) | P1SEG))
-#define P2SEGADDR(a)	\
-	((__typeof__(a))(((unsigned long)(a) & 0x1fffffff) | P2SEG))
-#define P3SEGADDR(a)	\
-	((__typeof__(a))(((unsigned long)(a) & 0x1fffffff) | P3SEG))
-#define P4SEGADDR(a)	\
-	((__typeof__(a))(((unsigned long)(a) & 0x1fffffff) | P4SEG))
-#endif /* 29BIT */
-#endif /* P1SEG */
-
-/* Check if an address can be reached in 29 bits */
-#define IS_29BIT(a)	(((unsigned long)(a)) < 0x20000000)
-
-#endif /* __KERNEL__ */
-#endif /* __ASM_SH_ADDRSPACE_H */
diff --git a/include/asm-sh/auxvec.h b/include/asm-sh/auxvec.h
deleted file mode 100644
index a6b9d4f4859e..000000000000
--- a/include/asm-sh/auxvec.h
+++ /dev/null
@@ -1,36 +0,0 @@
-#ifndef __ASM_SH_AUXVEC_H
-#define __ASM_SH_AUXVEC_H
-
-/*
- * Architecture-neutral AT_ values in 0-17, leave some room
- * for more of them.
- */
-
-/*
- * This entry gives some information about the FPU initialization
- * performed by the kernel.
- */
-#define AT_FPUCW		18	/* Used FPU control word.  */
-
-#ifdef CONFIG_VSYSCALL
-/*
- * Only define this in the vsyscall case, the entry point to
- * the vsyscall page gets placed here. The kernel will attempt
- * to build a gate VMA we don't care about otherwise..
- */
-#define AT_SYSINFO_EHDR		33
-#endif
-
-/*
- * More complete cache descriptions than AT_[DIU]CACHEBSIZE.  If the
- * value is -1, then the cache doesn't exist.  Otherwise:
- *
- *    bit 0-3:	  Cache set-associativity; 0 means fully associative.
- *    bit 4-7:	  Log2 of cacheline size.
- *    bit 8-31:	  Size of the entire cache >> 8.
- */
-#define AT_L1I_CACHESHAPE	34
-#define AT_L1D_CACHESHAPE	35
-#define AT_L2_CACHESHAPE	36
-
-#endif /* __ASM_SH_AUXVEC_H */
diff --git a/include/asm-sh/cache.h b/include/asm-sh/cache.h
deleted file mode 100644
index 083419f47c65..000000000000
--- a/include/asm-sh/cache.h
+++ /dev/null
@@ -1,51 +0,0 @@
-/* $Id: cache.h,v 1.6 2004/03/11 18:08:05 lethal Exp $
- *
- * include/asm-sh/cache.h
- *
- * Copyright 1999 (C) Niibe Yutaka
- * Copyright 2002, 2003 (C) Paul Mundt
- */
-#ifndef __ASM_SH_CACHE_H
-#define __ASM_SH_CACHE_H
-#ifdef __KERNEL__
-
-#include <linux/init.h>
-#include <asm/cpu/cache.h>
-
-#define L1_CACHE_BYTES		(1 << L1_CACHE_SHIFT)
-
-#define __read_mostly __attribute__((__section__(".data.read_mostly")))
-
-#ifndef __ASSEMBLY__
-struct cache_info {
-	unsigned int ways;		/* Number of cache ways */
-	unsigned int sets;		/* Number of cache sets */
-	unsigned int linesz;		/* Cache line size (bytes) */
-
-	unsigned int way_size;		/* sets * line size */
-
-	/*
-	 * way_incr is the address offset for accessing the next way
-	 * in memory mapped cache array ops.
-	 */
-	unsigned int way_incr;
-	unsigned int entry_shift;
-	unsigned int entry_mask;
-
-	/*
-	 * Compute a mask which selects the address bits which overlap between
-	 * 1. those used to select the cache set during indexing
-	 * 2. those in the physical page number.
-	 */
-	unsigned int alias_mask;
-
-	unsigned int n_aliases;		/* Number of aliases */
-
-	unsigned long flags;
-};
-
-int __init detect_cpu_and_cache_system(void);
-
-#endif /* __ASSEMBLY__ */
-#endif /* __KERNEL__ */
-#endif /* __ASM_SH_CACHE_H */
diff --git a/include/asm-sh/cacheflush.h b/include/asm-sh/cacheflush.h
deleted file mode 100644
index e034c3604111..000000000000
--- a/include/asm-sh/cacheflush.h
+++ /dev/null
@@ -1,81 +0,0 @@
-#ifndef __ASM_SH_CACHEFLUSH_H
-#define __ASM_SH_CACHEFLUSH_H
-
-#ifdef __KERNEL__
-
-#ifdef CONFIG_CACHE_OFF
-/*
- * Nothing to do when the cache is disabled, initial flush and explicit
- * disabling is handled at CPU init time.
- *
- * See arch/sh/kernel/cpu/init.c:cache_init().
- */
-#define p3_cache_init()				do { } while (0)
-#define flush_cache_all()			do { } while (0)
-#define flush_cache_mm(mm)			do { } while (0)
-#define flush_cache_dup_mm(mm)			do { } while (0)
-#define flush_cache_range(vma, start, end)	do { } while (0)
-#define flush_cache_page(vma, vmaddr, pfn)	do { } while (0)
-#define flush_dcache_page(page)			do { } while (0)
-#define flush_icache_range(start, end)		do { } while (0)
-#define flush_icache_page(vma,pg)		do { } while (0)
-#define flush_dcache_mmap_lock(mapping)		do { } while (0)
-#define flush_dcache_mmap_unlock(mapping)	do { } while (0)
-#define flush_cache_sigtramp(vaddr)		do { } while (0)
-#define flush_icache_user_range(vma,pg,adr,len)	do { } while (0)
-#define __flush_wback_region(start, size)	do { (void)(start); } while (0)
-#define __flush_purge_region(start, size)	do { (void)(start); } while (0)
-#define __flush_invalidate_region(start, size)	do { (void)(start); } while (0)
-#else
-#include <asm/cpu/cacheflush.h>
-
-/*
- * Consistent DMA requires that the __flush_xxx() primitives must be set
- * for any of the enabled non-coherent caches (most of the UP CPUs),
- * regardless of PIPT or VIPT cache configurations.
- */
-
-/* Flush (write-back only) a region (smaller than a page) */
-extern void __flush_wback_region(void *start, int size);
-/* Flush (write-back & invalidate) a region (smaller than a page) */
-extern void __flush_purge_region(void *start, int size);
-/* Flush (invalidate only) a region (smaller than a page) */
-extern void __flush_invalidate_region(void *start, int size);
-#endif
-
-#define ARCH_HAS_FLUSH_KERNEL_DCACHE_PAGE
-static inline void flush_kernel_dcache_page(struct page *page)
-{
-	flush_dcache_page(page);
-}
-
-#if defined(CONFIG_CPU_SH4) && !defined(CONFIG_CACHE_OFF)
-extern void copy_to_user_page(struct vm_area_struct *vma,
-	struct page *page, unsigned long vaddr, void *dst, const void *src,
-	unsigned long len);
-
-extern void copy_from_user_page(struct vm_area_struct *vma,
-	struct page *page, unsigned long vaddr, void *dst, const void *src,
-	unsigned long len);
-#else
-#define copy_to_user_page(vma, page, vaddr, dst, src, len)	\
-	do {							\
-		flush_cache_page(vma, vaddr, page_to_pfn(page));\
-		memcpy(dst, src, len);				\
-		flush_icache_user_range(vma, page, vaddr, len);	\
-	} while (0)
-
-#define copy_from_user_page(vma, page, vaddr, dst, src, len)	\
-	do {							\
-		flush_cache_page(vma, vaddr, page_to_pfn(page));\
-		memcpy(dst, src, len);				\
-	} while (0)
-#endif
-
-#define flush_cache_vmap(start, end)		flush_cache_all()
-#define flush_cache_vunmap(start, end)		flush_cache_all()
-
-#define HAVE_ARCH_UNMAPPED_AREA
-
-#endif /* __KERNEL__ */
-#endif /* __ASM_SH_CACHEFLUSH_H */
diff --git a/include/asm-sh/clock.h b/include/asm-sh/clock.h
deleted file mode 100644
index b550a27a7042..000000000000
--- a/include/asm-sh/clock.h
+++ /dev/null
@@ -1,82 +0,0 @@
-#ifndef __ASM_SH_CLOCK_H
-#define __ASM_SH_CLOCK_H
-
-#include <linux/kref.h>
-#include <linux/list.h>
-#include <linux/seq_file.h>
-#include <linux/clk.h>
-
-struct clk;
-
-struct clk_ops {
-	void (*init)(struct clk *clk);
-	void (*enable)(struct clk *clk);
-	void (*disable)(struct clk *clk);
-	void (*recalc)(struct clk *clk);
-	int (*set_rate)(struct clk *clk, unsigned long rate, int algo_id);
-	long (*round_rate)(struct clk *clk, unsigned long rate);
-};
-
-struct clk {
-	struct list_head	node;
-	const char		*name;
-	int			id;
-	struct module		*owner;
-
-	struct clk		*parent;
-	struct clk_ops		*ops;
-
-	struct kref		kref;
-
-	unsigned long		rate;
-	unsigned long		flags;
-};
-
-#define CLK_ALWAYS_ENABLED	(1 << 0)
-#define CLK_RATE_PROPAGATES	(1 << 1)
-
-/* Should be defined by processor-specific code */
-void arch_init_clk_ops(struct clk_ops **, int type);
-
-/* arch/sh/kernel/cpu/clock.c */
-int clk_init(void);
-
-int __clk_enable(struct clk *);
-void __clk_disable(struct clk *);
-
-void clk_recalc_rate(struct clk *);
-
-int clk_register(struct clk *);
-void clk_unregister(struct clk *);
-
-/* the exported API, in addition to clk_set_rate */
-/**
- * clk_set_rate_ex - set the clock rate for a clock source, with additional parameter
- * @clk: clock source
- * @rate: desired clock rate in Hz
- * @algo_id: algorithm id to be passed down to ops->set_rate
- *
- * Returns success (0) or negative errno.
- */
-int clk_set_rate_ex(struct clk *clk, unsigned long rate, int algo_id);
-
-enum clk_sh_algo_id {
-	NO_CHANGE = 0,
-
-	IUS_N1_N1,
-	IUS_322,
-	IUS_522,
-	IUS_N11,
-
-	SB_N1,
-
-	SB3_N1,
-	SB3_32,
-	SB3_43,
-	SB3_54,
-
-	BP_N1,
-
-	IP_N1,
-};
-#endif /* __ASM_SH_CLOCK_H */
diff --git a/include/asm-sh/cpu-sh2/cache.h b/include/asm-sh/cpu-sh2/cache.h
deleted file mode 100644
index 4e0b16500686..000000000000
--- a/include/asm-sh/cpu-sh2/cache.h
+++ /dev/null
@@ -1,41 +0,0 @@
-/*
- * include/asm-sh/cpu-sh2/cache.h
- *
- * Copyright (C) 2003 Paul Mundt
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-#ifndef __ASM_CPU_SH2_CACHE_H
-#define __ASM_CPU_SH2_CACHE_H
-
-#define L1_CACHE_SHIFT	4
-
-#define SH_CACHE_VALID		1
-#define SH_CACHE_UPDATED	2
-#define SH_CACHE_COMBINED	4
-#define SH_CACHE_ASSOC		8
-
-#if defined(CONFIG_CPU_SUBTYPE_SH7619)
-#define CCR		0xffffffec
-
-#define CCR_CACHE_CE	0x01	/* Cache enable */
-#define CCR_CACHE_WT	0x06    /* CCR[bit1=1,bit2=1] */
-				/* 0x00000000-0x7fffffff: Write-through  */
-				/* 0x80000000-0x9fffffff: Write-back     */
-                                /* 0xc0000000-0xdfffffff: Write-through  */
-#define CCR_CACHE_CB	0x00    /* CCR[bit1=0,bit2=0] */
-				/* 0x00000000-0x7fffffff: Write-back     */
-				/* 0x80000000-0x9fffffff: Write-through  */
-                                /* 0xc0000000-0xdfffffff: Write-back     */
-#define CCR_CACHE_CF	0x08	/* Cache invalidate */
-
-#define CACHE_OC_ADDRESS_ARRAY	0xf0000000
-#define CACHE_OC_DATA_ARRAY	0xf1000000
-
-#define CCR_CACHE_ENABLE	CCR_CACHE_CE
-#define CCR_CACHE_INVALIDATE	CCR_CACHE_CF
-#endif
-
-#endif /* __ASM_CPU_SH2_CACHE_H */
diff --git a/include/asm-sh/cpu-sh2/cacheflush.h b/include/asm-sh/cpu-sh2/cacheflush.h
deleted file mode 100644
index 2979efb26de3..000000000000
--- a/include/asm-sh/cpu-sh2/cacheflush.h
+++ /dev/null
@@ -1,44 +0,0 @@
-/*
- * include/asm-sh/cpu-sh2/cacheflush.h
- *
- * Copyright (C) 2003 Paul Mundt
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-#ifndef __ASM_CPU_SH2_CACHEFLUSH_H
-#define __ASM_CPU_SH2_CACHEFLUSH_H
-
-/* 
- * Cache flushing:
- *
- *  - flush_cache_all() flushes entire cache
- *  - flush_cache_mm(mm) flushes the specified mm context's cache lines
- *  - flush_cache_dup mm(mm) handles cache flushing when forking
- *  - flush_cache_page(mm, vmaddr, pfn) flushes a single page
- *  - flush_cache_range(vma, start, end) flushes a range of pages
- *
- *  - flush_dcache_page(pg) flushes(wback&invalidates) a page for dcache
- *  - flush_icache_range(start, end) flushes(invalidates) a range for icache
- *  - flush_icache_page(vma, pg) flushes(invalidates) a page for icache
- *
- *  Caches are indexed (effectively) by physical address on SH-2, so
- *  we don't need them.
- */
-#define flush_cache_all()			do { } while (0)
-#define flush_cache_mm(mm)			do { } while (0)
-#define flush_cache_dup_mm(mm)			do { } while (0)
-#define flush_cache_range(vma, start, end)	do { } while (0)
-#define flush_cache_page(vma, vmaddr, pfn)	do { } while (0)
-#define flush_dcache_page(page)			do { } while (0)
-#define flush_dcache_mmap_lock(mapping)		do { } while (0)
-#define flush_dcache_mmap_unlock(mapping)	do { } while (0)
-#define flush_icache_range(start, end)		do { } while (0)
-#define flush_icache_page(vma,pg)		do { } while (0)
-#define flush_icache_user_range(vma,pg,adr,len)	do { } while (0)
-#define flush_cache_sigtramp(vaddr)		do { } while (0)
-
-#define p3_cache_init()				do { } while (0)
-#endif /* __ASM_CPU_SH2_CACHEFLUSH_H */
-
diff --git a/include/asm-sh/cpu-sh2a/addrspace.h b/include/asm-sh/cpu-sh2a/addrspace.h
deleted file mode 100644
index 795ddd6856a3..000000000000
--- a/include/asm-sh/cpu-sh2a/addrspace.h
+++ /dev/null
@@ -1,10 +0,0 @@
-#ifndef __ASM_SH_CPU_SH2A_ADDRSPACE_H
-#define __ASM_SH_CPU_SH2A_ADDRSPACE_H
-
-#define P0SEG		0x00000000
-#define P1SEG		0x00000000
-#define P2SEG		0x20000000
-#define P3SEG		0x00000000
-#define P4SEG		0x80000000
-
-#endif /* __ASM_SH_CPU_SH2A_ADDRSPACE_H */
diff --git a/include/asm-sh/cpu-sh2a/cache.h b/include/asm-sh/cpu-sh2a/cache.h
deleted file mode 100644
index afe228b3f493..000000000000
--- a/include/asm-sh/cpu-sh2a/cache.h
+++ /dev/null
@@ -1,40 +0,0 @@
-/*
- * include/asm-sh/cpu-sh2a/cache.h
- *
- * Copyright (C) 2004 Paul Mundt
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-#ifndef __ASM_CPU_SH2A_CACHE_H
-#define __ASM_CPU_SH2A_CACHE_H
-
-#define L1_CACHE_SHIFT	4
-
-#define SH_CACHE_VALID		1
-#define SH_CACHE_UPDATED	2
-#define SH_CACHE_COMBINED	4
-#define SH_CACHE_ASSOC		8
-
-#define CCR		0xfffc1000 /* CCR1 */
-#define CCR2		0xfffc1004
-
-/*
- * Most of the SH-2A CCR1 definitions resemble the SH-4 ones. All others not
- * listed here are reserved.
- */
-#define CCR_CACHE_CB	0x0000	/* Hack */
-#define CCR_CACHE_OCE	0x0001
-#define CCR_CACHE_WT	0x0002
-#define CCR_CACHE_OCI	0x0008	/* OCF */
-#define CCR_CACHE_ICE	0x0100
-#define CCR_CACHE_ICI	0x0800	/* ICF */
-
-#define CACHE_IC_ADDRESS_ARRAY	0xf0000000
-#define CACHE_OC_ADDRESS_ARRAY	0xf0800000
-
-#define CCR_CACHE_ENABLE	(CCR_CACHE_OCE | CCR_CACHE_ICE)
-#define CCR_CACHE_INVALIDATE	(CCR_CACHE_OCI | CCR_CACHE_ICI)
-
-#endif /* __ASM_CPU_SH2A_CACHE_H */
diff --git a/include/asm-sh/cpu-sh2a/cacheflush.h b/include/asm-sh/cpu-sh2a/cacheflush.h
deleted file mode 100644
index fa3186c73350..000000000000
--- a/include/asm-sh/cpu-sh2a/cacheflush.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm/cpu-sh2/cacheflush.h>
diff --git a/include/asm-sh/cpu-sh2a/dma.h b/include/asm-sh/cpu-sh2a/dma.h
deleted file mode 100644
index 0d5ad85c1de8..000000000000
--- a/include/asm-sh/cpu-sh2a/dma.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm/cpu-sh2/dma.h>
diff --git a/include/asm-sh/cpu-sh2a/mmu_context.h b/include/asm-sh/cpu-sh2a/mmu_context.h
deleted file mode 100644
index cd2387f7db9e..000000000000
--- a/include/asm-sh/cpu-sh2a/mmu_context.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm/cpu-sh2/mmu_context.h>
diff --git a/include/asm-sh/cpu-sh2a/timer.h b/include/asm-sh/cpu-sh2a/timer.h
deleted file mode 100644
index fee504adf11e..000000000000
--- a/include/asm-sh/cpu-sh2a/timer.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm/cpu-sh2/timer.h>
diff --git a/include/asm-sh/cpu-sh2a/ubc.h b/include/asm-sh/cpu-sh2a/ubc.h
deleted file mode 100644
index cf28062b96a2..000000000000
--- a/include/asm-sh/cpu-sh2a/ubc.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm/cpu-sh2/ubc.h>
diff --git a/include/asm-sh/cpu-sh2a/watchdog.h b/include/asm-sh/cpu-sh2a/watchdog.h
deleted file mode 100644
index c1b3e2488478..000000000000
--- a/include/asm-sh/cpu-sh2a/watchdog.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm/cpu-sh2/watchdog.h>
diff --git a/include/asm-sh/cpu-sh3/addrspace.h b/include/asm-sh/cpu-sh3/addrspace.h
deleted file mode 100644
index 0f94726c7d62..000000000000
--- a/include/asm-sh/cpu-sh3/addrspace.h
+++ /dev/null
@@ -1,19 +0,0 @@
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 1999 by Kaz Kojima
- *
- * Defitions for the address spaces of the SH-3 CPUs.
- */
-#ifndef __ASM_CPU_SH3_ADDRSPACE_H
-#define __ASM_CPU_SH3_ADDRSPACE_H
-
-#define P0SEG		0x00000000
-#define P1SEG		0x80000000
-#define P2SEG		0xa0000000
-#define P3SEG		0xc0000000
-#define P4SEG		0xe0000000
-
-#endif /* __ASM_CPU_SH3_ADDRSPACE_H */
diff --git a/include/asm-sh/cpu-sh3/cacheflush.h b/include/asm-sh/cpu-sh3/cacheflush.h
deleted file mode 100644
index f70d8ef76a15..000000000000
--- a/include/asm-sh/cpu-sh3/cacheflush.h
+++ /dev/null
@@ -1,70 +0,0 @@
-/*
- * include/asm-sh/cpu-sh3/cacheflush.h
- *
- * Copyright (C) 1999 Niibe Yutaka
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-#ifndef __ASM_CPU_SH3_CACHEFLUSH_H
-#define __ASM_CPU_SH3_CACHEFLUSH_H
-
-/*
- * Cache flushing:
- *
- *  - flush_cache_all() flushes entire cache
- *  - flush_cache_mm(mm) flushes the specified mm context's cache lines
- *  - flush_cache_dup mm(mm) handles cache flushing when forking
- *  - flush_cache_page(mm, vmaddr, pfn) flushes a single page
- *  - flush_cache_range(vma, start, end) flushes a range of pages
- *
- *  - flush_dcache_page(pg) flushes(wback&invalidates) a page for dcache
- *  - flush_icache_range(start, end) flushes(invalidates) a range for icache
- *  - flush_icache_page(vma, pg) flushes(invalidates) a page for icache
- *
- *  Caches are indexed (effectively) by physical address on SH-3, so
- *  we don't need them.
- */
-
-#if defined(CONFIG_SH7705_CACHE_32KB)
-
-/* SH7705 is an SH3 processor with 32KB cache. This has alias issues like the
- * SH4. Unlike the SH4 this is a unified cache so we need to do some work
- * in mmap when 'exec'ing a new binary
- */
- /* 32KB cache, 4kb PAGE sizes need to check bit 12 */
-#define CACHE_ALIAS 0x00001000
-
-#define PG_mapped	PG_arch_1
-
-void flush_cache_all(void);
-void flush_cache_mm(struct mm_struct *mm);
-#define flush_cache_dup_mm(mm) flush_cache_mm(mm)
-void flush_cache_range(struct vm_area_struct *vma, unsigned long start,
-                              unsigned long end);
-void flush_cache_page(struct vm_area_struct *vma, unsigned long addr, unsigned long pfn);
-void flush_dcache_page(struct page *pg);
-void flush_icache_range(unsigned long start, unsigned long end);
-void flush_icache_page(struct vm_area_struct *vma, struct page *page);
-#else
-#define flush_cache_all()			do { } while (0)
-#define flush_cache_mm(mm)			do { } while (0)
-#define flush_cache_dup_mm(mm)			do { } while (0)
-#define flush_cache_range(vma, start, end)	do { } while (0)
-#define flush_cache_page(vma, vmaddr, pfn)	do { } while (0)
-#define flush_dcache_page(page)			do { } while (0)
-#define flush_icache_range(start, end)		do { } while (0)
-#define flush_icache_page(vma,pg)		do { } while (0)
-#endif
-
-#define flush_dcache_mmap_lock(mapping)		do { } while (0)
-#define flush_dcache_mmap_unlock(mapping)	do { } while (0)
-
-/* SH3 has unified cache so no special action needed here */
-#define flush_cache_sigtramp(vaddr)		do { } while (0)
-#define flush_icache_user_range(vma,pg,adr,len)	do { } while (0)
-
-#define p3_cache_init()				do { } while (0)
-
-#endif /* __ASM_CPU_SH3_CACHEFLUSH_H */
diff --git a/include/asm-sh/cpu-sh3/rtc.h b/include/asm-sh/cpu-sh3/rtc.h
deleted file mode 100644
index 319404aaee37..000000000000
--- a/include/asm-sh/cpu-sh3/rtc.h
+++ /dev/null
@@ -1,8 +0,0 @@
-#ifndef __ASM_SH_CPU_SH3_RTC_H
-#define __ASM_SH_CPU_SH3_RTC_H
-
-#define rtc_reg_size		sizeof(u16)
-#define RTC_BIT_INVERTED	0	/* No bug on SH7708, SH7709A */
-#define RTC_DEF_CAPABILITIES	0UL
-
-#endif /* __ASM_SH_CPU_SH3_RTC_H */
diff --git a/include/asm-sh/cpu-sh3/sigcontext.h b/include/asm-sh/cpu-sh3/sigcontext.h
deleted file mode 100644
index 17310dc03dcd..000000000000
--- a/include/asm-sh/cpu-sh3/sigcontext.h
+++ /dev/null
@@ -1,17 +0,0 @@
-#ifndef __ASM_CPU_SH3_SIGCONTEXT_H
-#define __ASM_CPU_SH3_SIGCONTEXT_H
-
-struct sigcontext {
-	unsigned long	oldmask;
-
-	/* CPU registers */
-	unsigned long sc_regs[16];
-	unsigned long sc_pc;
-	unsigned long sc_pr;
-	unsigned long sc_sr;
-	unsigned long sc_gbr;
-	unsigned long sc_mach;
-	unsigned long sc_macl;
-};
-
-#endif /* __ASM_CPU_SH3_SIGCONTEXT_H */
diff --git a/include/asm-sh/cpu-sh4/cacheflush.h b/include/asm-sh/cpu-sh4/cacheflush.h
deleted file mode 100644
index 5fd5c89ef86a..000000000000
--- a/include/asm-sh/cpu-sh4/cacheflush.h
+++ /dev/null
@@ -1,44 +0,0 @@
-/*
- * include/asm-sh/cpu-sh4/cacheflush.h
- *
- * Copyright (C) 1999 Niibe Yutaka
- * Copyright (C) 2003 Paul Mundt
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-#ifndef __ASM_CPU_SH4_CACHEFLUSH_H
-#define __ASM_CPU_SH4_CACHEFLUSH_H
-
-/*
- *  Caches are broken on SH-4 (unless we use write-through
- *  caching; in which case they're only semi-broken),
- *  so we need them.
- */
-void flush_cache_all(void);
-void flush_dcache_all(void);
-void flush_cache_mm(struct mm_struct *mm);
-#define flush_cache_dup_mm(mm) flush_cache_mm(mm)
-void flush_cache_range(struct vm_area_struct *vma, unsigned long start,
-		       unsigned long end);
-void flush_cache_page(struct vm_area_struct *vma, unsigned long addr,
-		      unsigned long pfn);
-void flush_dcache_page(struct page *pg);
-
-#define flush_dcache_mmap_lock(mapping)		do { } while (0)
-#define flush_dcache_mmap_unlock(mapping)	do { } while (0)
-
-void flush_icache_range(unsigned long start, unsigned long end);
-void flush_cache_sigtramp(unsigned long addr);
-void flush_icache_user_range(struct vm_area_struct *vma, struct page *page,
-			     unsigned long addr, int len);
-
-#define flush_icache_page(vma,pg)		do { } while (0)
-
-/* Initialization of P3 area for copy_user_page */
-void p3_cache_init(void);
-
-#define PG_mapped	PG_arch_1
-
-#endif /* __ASM_CPU_SH4_CACHEFLUSH_H */
diff --git a/include/asm-sh/cpu-sh4/dma.h b/include/asm-sh/cpu-sh4/dma.h
deleted file mode 100644
index aaf71b018c28..000000000000
--- a/include/asm-sh/cpu-sh4/dma.h
+++ /dev/null
@@ -1,65 +0,0 @@
-#ifndef __ASM_CPU_SH4_DMA_H
-#define __ASM_CPU_SH4_DMA_H
-
-#define DMAOR_INIT	( 0x8000 | DMAOR_DME )
-
-/* SH7751/7760/7780 DMA IRQ sources */
-#define DMTE0_IRQ	34
-#define DMTE1_IRQ	35
-#define DMTE2_IRQ	36
-#define DMTE3_IRQ	37
-#define DMTE4_IRQ	44
-#define DMTE5_IRQ	45
-#define DMTE6_IRQ	46
-#define DMTE7_IRQ	47
-#define DMAE_IRQ	38
-
-#ifdef CONFIG_CPU_SH4A
-#define SH_DMAC_BASE	0xfc808020
-
-#define CHCR_TS_MASK	0x18
-#define CHCR_TS_SHIFT	3
-
-#include <asm/cpu/dma-sh7780.h>
-#else
-#define SH_DMAC_BASE	0xffa00000
-
-/* Definitions for the SuperH DMAC */
-#define TM_BURST	0x0000080
-#define TS_8		0x00000010
-#define TS_16		0x00000020
-#define TS_32		0x00000030
-#define TS_64		0x00000000
-
-#define CHCR_TS_MASK	0x70
-#define CHCR_TS_SHIFT	4
-
-#define DMAOR_COD	0x00000008
-
-/*
- * The SuperH DMAC supports a number of transmit sizes, we list them here,
- * with their respective values as they appear in the CHCR registers.
- *
- * Defaults to a 64-bit transfer size.
- */
-enum {
-	XMIT_SZ_64BIT,
-	XMIT_SZ_8BIT,
-	XMIT_SZ_16BIT,
-	XMIT_SZ_32BIT,
-	XMIT_SZ_256BIT,
-};
-
-/*
- * The DMA count is defined as the number of bytes to transfer.
- */
-static unsigned int ts_shift[] __maybe_unused = {
-	[XMIT_SZ_64BIT]		= 3,
-	[XMIT_SZ_8BIT]		= 0,
-	[XMIT_SZ_16BIT]		= 1,
-	[XMIT_SZ_32BIT]		= 2,
-	[XMIT_SZ_256BIT]	= 5,
-};
-#endif
-
-#endif /* __ASM_CPU_SH4_DMA_H */
diff --git a/include/asm-sh/cpu-sh4/freq.h b/include/asm-sh/cpu-sh4/freq.h
deleted file mode 100644
index da46e67ae26d..000000000000
--- a/include/asm-sh/cpu-sh4/freq.h
+++ /dev/null
@@ -1,40 +0,0 @@
-/*
- * include/asm-sh/cpu-sh4/freq.h
- *
- * Copyright (C) 2002, 2003 Paul Mundt
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-#ifndef __ASM_CPU_SH4_FREQ_H
-#define __ASM_CPU_SH4_FREQ_H
-
-#if defined(CONFIG_CPU_SUBTYPE_SH7722) || \
-    defined(CONFIG_CPU_SUBTYPE_SH7723) || \
-    defined(CONFIG_CPU_SUBTYPE_SH7366)
-#define FRQCR		        0xa4150000
-#define VCLKCR			0xa4150004
-#define SCLKACR			0xa4150008
-#define SCLKBCR			0xa415000c
-#define IrDACLKCR		0xa4150010
-#elif defined(CONFIG_CPU_SUBTYPE_SH7763) || \
-      defined(CONFIG_CPU_SUBTYPE_SH7780)
-#define	FRQCR			0xffc80000
-#elif defined(CONFIG_CPU_SUBTYPE_SH7785)
-#define FRQCR0			0xffc80000
-#define FRQCR1			0xffc80004
-#define FRQMR1			0xffc80014
-#elif defined(CONFIG_CPU_SUBTYPE_SHX3)
-#define FRQCR			0xffc00014
-#else
-#define FRQCR			0xffc00000
-#define FRQCR_PSTBY		0x0200
-#define FRQCR_PLLEN		0x0400
-#define FRQCR_CKOEN		0x0800
-#endif
-#define MIN_DIVISOR_NR		0
-#define MAX_DIVISOR_NR		3
-
-#endif /* __ASM_CPU_SH4_FREQ_H */
-
diff --git a/include/asm-sh/cpu-sh5/timer.h b/include/asm-sh/cpu-sh5/timer.h
deleted file mode 100644
index 88da9b341a36..000000000000
--- a/include/asm-sh/cpu-sh5/timer.h
+++ /dev/null
@@ -1,4 +0,0 @@
-#ifndef __ASM_SH_CPU_SH5_TIMER_H
-#define __ASM_SH_CPU_SH5_TIMER_H
-
-#endif /* __ASM_SH_CPU_SH5_TIMER_H */
diff --git a/include/asm-sh/device.h b/include/asm-sh/device.h
deleted file mode 100644
index d8f9872b0e2d..000000000000
--- a/include/asm-sh/device.h
+++ /dev/null
@@ -1,7 +0,0 @@
-/*
- * Arch specific extensions to struct device
- *
- * This file is released under the GPLv2
- */
-#include <asm-generic/device.h>
-
diff --git a/include/asm-sh/dma-mapping.h b/include/asm-sh/dma-mapping.h
deleted file mode 100644
index 22cc419389fe..000000000000
--- a/include/asm-sh/dma-mapping.h
+++ /dev/null
@@ -1,192 +0,0 @@
-#ifndef __ASM_SH_DMA_MAPPING_H
-#define __ASM_SH_DMA_MAPPING_H
-
-#include <linux/mm.h>
-#include <linux/scatterlist.h>
-#include <asm/cacheflush.h>
-#include <asm/io.h>
-
-extern struct bus_type pci_bus_type;
-
-#define dma_supported(dev, mask)	(1)
-
-static inline int dma_set_mask(struct device *dev, u64 mask)
-{
-	if (!dev->dma_mask || !dma_supported(dev, mask))
-		return -EIO;
-
-	*dev->dma_mask = mask;
-
-	return 0;
-}
-
-void *dma_alloc_coherent(struct device *dev, size_t size,
-			 dma_addr_t *dma_handle, gfp_t flag);
-
-void dma_free_coherent(struct device *dev, size_t size,
-		       void *vaddr, dma_addr_t dma_handle);
-
-void dma_cache_sync(struct device *dev, void *vaddr, size_t size,
-		    enum dma_data_direction dir);
-
-#define dma_alloc_noncoherent(d, s, h, f) dma_alloc_coherent(d, s, h, f)
-#define dma_free_noncoherent(d, s, v, h) dma_free_coherent(d, s, v, h)
-#define dma_is_consistent(d, h) (1)
-
-static inline dma_addr_t dma_map_single(struct device *dev,
-					void *ptr, size_t size,
-					enum dma_data_direction dir)
-{
-#if defined(CONFIG_PCI) && !defined(CONFIG_SH_PCIDMA_NONCOHERENT)
-	if (dev->bus == &pci_bus_type)
-		return virt_to_phys(ptr);
-#endif
-	dma_cache_sync(dev, ptr, size, dir);
-
-	return virt_to_phys(ptr);
-}
-
-#define dma_unmap_single(dev, addr, size, dir)	do { } while (0)
-
-static inline int dma_map_sg(struct device *dev, struct scatterlist *sg,
-			     int nents, enum dma_data_direction dir)
-{
-	int i;
-
-	for (i = 0; i < nents; i++) {
-#if !defined(CONFIG_PCI) || defined(CONFIG_SH_PCIDMA_NONCOHERENT)
-		dma_cache_sync(dev, sg_virt(&sg[i]), sg[i].length, dir);
-#endif
-		sg[i].dma_address = sg_phys(&sg[i]);
-	}
-
-	return nents;
-}
-
-#define dma_unmap_sg(dev, sg, nents, dir)	do { } while (0)
-
-static inline dma_addr_t dma_map_page(struct device *dev, struct page *page,
-				      unsigned long offset, size_t size,
-				      enum dma_data_direction dir)
-{
-	return dma_map_single(dev, page_address(page) + offset, size, dir);
-}
-
-static inline void dma_unmap_page(struct device *dev, dma_addr_t dma_address,
-				  size_t size, enum dma_data_direction dir)
-{
-	dma_unmap_single(dev, dma_address, size, dir);
-}
-
-static inline void dma_sync_single(struct device *dev, dma_addr_t dma_handle,
-				   size_t size, enum dma_data_direction dir)
-{
-#if defined(CONFIG_PCI) && !defined(CONFIG_SH_PCIDMA_NONCOHERENT)
-	if (dev->bus == &pci_bus_type)
-		return;
-#endif
-	dma_cache_sync(dev, phys_to_virt(dma_handle), size, dir);
-}
-
-static inline void dma_sync_single_range(struct device *dev,
-					 dma_addr_t dma_handle,
-					 unsigned long offset, size_t size,
-					 enum dma_data_direction dir)
-{
-#if defined(CONFIG_PCI) && !defined(CONFIG_SH_PCIDMA_NONCOHERENT)
-	if (dev->bus == &pci_bus_type)
-		return;
-#endif
-	dma_cache_sync(dev, phys_to_virt(dma_handle) + offset, size, dir);
-}
-
-static inline void dma_sync_sg(struct device *dev, struct scatterlist *sg,
-			       int nelems, enum dma_data_direction dir)
-{
-	int i;
-
-	for (i = 0; i < nelems; i++) {
-#if !defined(CONFIG_PCI) || defined(CONFIG_SH_PCIDMA_NONCOHERENT)
-		dma_cache_sync(dev, sg_virt(&sg[i]), sg[i].length, dir);
-#endif
-		sg[i].dma_address = sg_phys(&sg[i]);
-	}
-}
-
-static inline void dma_sync_single_for_cpu(struct device *dev,
-					   dma_addr_t dma_handle, size_t size,
-					   enum dma_data_direction dir)
-{
-	dma_sync_single(dev, dma_handle, size, dir);
-}
-
-static inline void dma_sync_single_for_device(struct device *dev,
-					      dma_addr_t dma_handle,
-					      size_t size,
-					      enum dma_data_direction dir)
-{
-	dma_sync_single(dev, dma_handle, size, dir);
-}
-
-static inline void dma_sync_single_range_for_cpu(struct device *dev,
-						 dma_addr_t dma_handle,
-						 unsigned long offset,
-						 size_t size,
-						 enum dma_data_direction direction)
-{
-	dma_sync_single_for_cpu(dev, dma_handle+offset, size, direction);
-}
-
-static inline void dma_sync_single_range_for_device(struct device *dev,
-						    dma_addr_t dma_handle,
-						    unsigned long offset,
-						    size_t size,
-						    enum dma_data_direction direction)
-{
-	dma_sync_single_for_device(dev, dma_handle+offset, size, direction);
-}
-
-
-static inline void dma_sync_sg_for_cpu(struct device *dev,
-				       struct scatterlist *sg, int nelems,
-				       enum dma_data_direction dir)
-{
-	dma_sync_sg(dev, sg, nelems, dir);
-}
-
-static inline void dma_sync_sg_for_device(struct device *dev,
-					  struct scatterlist *sg, int nelems,
-					  enum dma_data_direction dir)
-{
-	dma_sync_sg(dev, sg, nelems, dir);
-}
-
-
-static inline int dma_get_cache_alignment(void)
-{
-	/*
-	 * Each processor family will define its own L1_CACHE_SHIFT,
-	 * L1_CACHE_BYTES wraps to this, so this is always safe.
-	 */
-	return L1_CACHE_BYTES;
-}
-
-static inline int dma_mapping_error(dma_addr_t dma_addr)
-{
-	return dma_addr == 0;
-}
-
-#define ARCH_HAS_DMA_DECLARE_COHERENT_MEMORY
-
-extern int
-dma_declare_coherent_memory(struct device *dev, dma_addr_t bus_addr,
-			    dma_addr_t device_addr, size_t size, int flags);
-
-extern void
-dma_release_declared_memory(struct device *dev);
-
-extern void *
-dma_mark_declared_memory_occupied(struct device *dev,
-				  dma_addr_t device_addr, size_t size);
-
-#endif /* __ASM_SH_DMA_MAPPING_H */
diff --git a/include/asm-sh/dma.h b/include/asm-sh/dma.h
deleted file mode 100644
index a65b02fd186e..000000000000
--- a/include/asm-sh/dma.h
+++ /dev/null
@@ -1,166 +0,0 @@
-/*
- * include/asm-sh/dma.h
- *
- * Copyright (C) 2003, 2004  Paul Mundt
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-#ifndef __ASM_SH_DMA_H
-#define __ASM_SH_DMA_H
-#ifdef __KERNEL__
-
-#include <linux/spinlock.h>
-#include <linux/wait.h>
-#include <linux/sched.h>
-#include <linux/sysdev.h>
-#include <asm/cpu/dma.h>
-
-/* The maximum address that we can perform a DMA transfer to on this platform */
-/* Don't define MAX_DMA_ADDRESS; it's useless on the SuperH and any
-   occurrence should be flagged as an error.  */
-/* But... */
-/* XXX: This is not applicable to SuperH, just needed for alloc_bootmem */
-#define MAX_DMA_ADDRESS		(PAGE_OFFSET+0x10000000)
-
-#ifdef CONFIG_NR_DMA_CHANNELS
-#  define MAX_DMA_CHANNELS	(CONFIG_NR_DMA_CHANNELS)
-#else
-#  define MAX_DMA_CHANNELS	(CONFIG_NR_ONCHIP_DMA_CHANNELS)
-#endif
-
-/*
- * Read and write modes can mean drastically different things depending on the
- * channel configuration. Consult your DMAC documentation and module
- * implementation for further clues.
- */
-#define DMA_MODE_READ		0x00
-#define DMA_MODE_WRITE		0x01
-#define DMA_MODE_MASK		0x01
-
-#define DMA_AUTOINIT		0x10
-
-/*
- * DMAC (dma_info) flags
- */
-enum {
-	DMAC_CHANNELS_CONFIGURED	= 0x01,
-	DMAC_CHANNELS_TEI_CAPABLE	= 0x02,	/* Transfer end interrupt */
-};
-
-/*
- * DMA channel capabilities / flags
- */
-enum {
-	DMA_CONFIGURED			= 0x01,
-
-	/*
-	 * Transfer end interrupt, inherited from DMAC.
-	 * wait_queue used in dma_wait_for_completion.
-	 */
-	DMA_TEI_CAPABLE			= 0x02,
-};
-
-extern spinlock_t dma_spin_lock;
-
-struct dma_channel;
-
-struct dma_ops {
-	int (*request)(struct dma_channel *chan);
-	void (*free)(struct dma_channel *chan);
-
-	int (*get_residue)(struct dma_channel *chan);
-	int (*xfer)(struct dma_channel *chan);
-	int (*configure)(struct dma_channel *chan, unsigned long flags);
-	int (*extend)(struct dma_channel *chan, unsigned long op, void *param);
-};
-
-struct dma_channel {
-	char dev_id[16];		/* unique name per DMAC of channel */
-
-	unsigned int chan;		/* DMAC channel number */
-	unsigned int vchan;		/* Virtual channel number */
-
-	unsigned int mode;
-	unsigned int count;
-
-	unsigned long sar;
-	unsigned long dar;
-
-	const char **caps;
-
-	unsigned long flags;
-	atomic_t busy;
-
-	wait_queue_head_t wait_queue;
-
-	struct sys_device dev;
-	void *priv_data;
-};
-
-struct dma_info {
-	struct platform_device *pdev;
-
-	const char *name;
-	unsigned int nr_channels;
-	unsigned long flags;
-
-	struct dma_ops *ops;
-	struct dma_channel *channels;
-
-	struct list_head list;
-	int first_channel_nr;
-	int first_vchannel_nr;
-};
-
-struct dma_chan_caps {
-	int ch_num;
-	const char **caplist;
-};
-
-#define to_dma_channel(channel) container_of(channel, struct dma_channel, dev)
-
-/* arch/sh/drivers/dma/dma-api.c */
-extern int dma_xfer(unsigned int chan, unsigned long from,
-		    unsigned long to, size_t size, unsigned int mode);
-
-#define dma_write(chan, from, to, size)	\
-	dma_xfer(chan, from, to, size, DMA_MODE_WRITE)
-#define dma_write_page(chan, from, to)	\
-	dma_write(chan, from, to, PAGE_SIZE)
-
-#define dma_read(chan, from, to, size)	\
-	dma_xfer(chan, from, to, size, DMA_MODE_READ)
-#define dma_read_page(chan, from, to)	\
-	dma_read(chan, from, to, PAGE_SIZE)
-
-extern int request_dma_bycap(const char **dmac, const char **caps,
-			     const char *dev_id);
-extern int request_dma(unsigned int chan, const char *dev_id);
-extern void free_dma(unsigned int chan);
-extern int get_dma_residue(unsigned int chan);
-extern struct dma_info *get_dma_info(unsigned int chan);
-extern struct dma_channel *get_dma_channel(unsigned int chan);
-extern void dma_wait_for_completion(unsigned int chan);
-extern void dma_configure_channel(unsigned int chan, unsigned long flags);
-
-extern int register_dmac(struct dma_info *info);
-extern void unregister_dmac(struct dma_info *info);
-extern struct dma_info *get_dma_info_by_name(const char *dmac_name);
-
-extern int dma_extend(unsigned int chan, unsigned long op, void *param);
-extern int register_chan_caps(const char *dmac, struct dma_chan_caps *capslist);
-
-/* arch/sh/drivers/dma/dma-sysfs.c */
-extern int dma_create_sysfs_files(struct dma_channel *, struct dma_info *);
-extern void dma_remove_sysfs_files(struct dma_channel *, struct dma_info *);
-
-#ifdef CONFIG_PCI
-extern int isa_dma_bridge_buggy;
-#else
-#define isa_dma_bridge_buggy	(0)
-#endif
-
-#endif /* __KERNEL__ */
-#endif /* __ASM_SH_DMA_H */
diff --git a/include/asm-sh/dreamcast/pci.h b/include/asm-sh/dreamcast/pci.h
deleted file mode 100644
index e401b24b0d8e..000000000000
--- a/include/asm-sh/dreamcast/pci.h
+++ /dev/null
@@ -1,25 +0,0 @@
-/*
- * include/asm-sh/dreamcast/pci.h
- *
- * Copyright (C) 2001, 2002  M. R. Brown
- * Copyright (C) 2002, 2003  Paul Mundt
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-#ifndef __ASM_SH_DREAMCAST_PCI_H
-#define __ASM_SH_DREAMCAST_PCI_H
-
-#include <asm/mach/sysasic.h>
-
-#define	GAPSPCI_REGS		0x01001400
-#define GAPSPCI_DMA_BASE	0x01840000
-#define GAPSPCI_DMA_SIZE	32768
-#define GAPSPCI_BBA_CONFIG	0x01001600
-#define GAPSPCI_BBA_CONFIG_SIZE	0x2000
-
-#define	GAPSPCI_IRQ		HW_EVENT_EXTERNAL
-
-#endif /* __ASM_SH_DREAMCAST_PCI_H */
-
diff --git a/include/asm-sh/elf.h b/include/asm-sh/elf.h
deleted file mode 100644
index 05092da1aa59..000000000000
--- a/include/asm-sh/elf.h
+++ /dev/null
@@ -1,193 +0,0 @@
-#ifndef __ASM_SH_ELF_H
-#define __ASM_SH_ELF_H
-
-#include <asm/auxvec.h>
-#include <asm/ptrace.h>
-#include <asm/user.h>
-
-/* SH (particularly SHcompact) relocation types  */
-#define	R_SH_NONE		0
-#define	R_SH_DIR32		1
-#define	R_SH_REL32		2
-#define	R_SH_DIR8WPN		3
-#define	R_SH_IND12W		4
-#define	R_SH_DIR8WPL		5
-#define	R_SH_DIR8WPZ		6
-#define	R_SH_DIR8BP		7
-#define	R_SH_DIR8W		8
-#define	R_SH_DIR8L		9
-#define	R_SH_SWITCH16		25
-#define	R_SH_SWITCH32		26
-#define	R_SH_USES		27
-#define	R_SH_COUNT		28
-#define	R_SH_ALIGN		29
-#define	R_SH_CODE		30
-#define	R_SH_DATA		31
-#define	R_SH_LABEL		32
-#define	R_SH_SWITCH8		33
-#define	R_SH_GNU_VTINHERIT	34
-#define	R_SH_GNU_VTENTRY	35
-#define	R_SH_TLS_GD_32		144
-#define	R_SH_TLS_LD_32		145
-#define	R_SH_TLS_LDO_32		146
-#define	R_SH_TLS_IE_32		147
-#define	R_SH_TLS_LE_32		148
-#define	R_SH_TLS_DTPMOD32	149
-#define	R_SH_TLS_DTPOFF32	150
-#define	R_SH_TLS_TPOFF32	151
-#define	R_SH_GOT32		160
-#define	R_SH_PLT32		161
-#define	R_SH_COPY		162
-#define	R_SH_GLOB_DAT		163
-#define	R_SH_JMP_SLOT		164
-#define	R_SH_RELATIVE		165
-#define	R_SH_GOTOFF		166
-#define	R_SH_GOTPC		167
-/* SHmedia relocs */
-#define R_SH_IMM_LOW16		246
-#define R_SH_IMM_LOW16_PCREL	247
-#define R_SH_IMM_MEDLOW16	248
-#define R_SH_IMM_MEDLOW16_PCREL	249
-/* Keep this the last entry.  */
-#define	R_SH_NUM		256
-
-/*
- * ELF register definitions..
- */
-
-typedef unsigned long elf_greg_t;
-
-#define ELF_NGREG (sizeof (struct pt_regs) / sizeof(elf_greg_t))
-typedef elf_greg_t elf_gregset_t[ELF_NGREG];
-
-typedef struct user_fpu_struct elf_fpregset_t;
-
-/*
- * These are used to set parameters in the core dumps.
- */
-#define ELF_CLASS	ELFCLASS32
-#ifdef __LITTLE_ENDIAN__
-#define ELF_DATA	ELFDATA2LSB
-#else
-#define ELF_DATA	ELFDATA2MSB
-#endif
-#define ELF_ARCH	EM_SH
-
-#ifdef __KERNEL__
-/*
- * This is used to ensure we don't load something for the wrong architecture.
- */
-#define elf_check_arch(x) ( (x)->e_machine == EM_SH )
-
-#define USE_ELF_CORE_DUMP
-#define ELF_EXEC_PAGESIZE	PAGE_SIZE
-
-/* This is the location that an ET_DYN program is loaded if exec'ed.  Typical
-   use of this is to invoke "./ld.so someprog" to test out a new version of
-   the loader.  We need to make sure that it is out of the way of the program
-   that it will "exec", and that there is sufficient room for the brk.  */
-
-#define ELF_ET_DYN_BASE         (2 * TASK_SIZE / 3)
-
-#define ELF_CORE_COPY_REGS(_dest,_regs)				\
-	memcpy((char *) &_dest, (char *) _regs,			\
-	       sizeof(struct pt_regs));
-
-/* This yields a mask that user programs can use to figure out what
-   instruction set this CPU supports.  This could be done in user space,
-   but it's not easy, and we've already done it here.  */
-
-#define ELF_HWCAP	(boot_cpu_data.flags)
-
-/* This yields a string that ld.so will use to load implementation
-   specific libraries for optimization.  This is more specific in
-   intent than poking at uname or /proc/cpuinfo.
-
-   For the moment, we have only optimizations for the Intel generations,
-   but that could change... */
-
-#define ELF_PLATFORM	(utsname()->machine)
-
-#ifdef __SH5__
-#define ELF_PLAT_INIT(_r, load_addr) \
-  do { _r->regs[0]=0; _r->regs[1]=0; _r->regs[2]=0; _r->regs[3]=0; \
-       _r->regs[4]=0; _r->regs[5]=0; _r->regs[6]=0; _r->regs[7]=0; \
-       _r->regs[8]=0; _r->regs[9]=0; _r->regs[10]=0; _r->regs[11]=0; \
-       _r->regs[12]=0; _r->regs[13]=0; _r->regs[14]=0; _r->regs[15]=0; \
-       _r->regs[16]=0; _r->regs[17]=0; _r->regs[18]=0; _r->regs[19]=0; \
-       _r->regs[20]=0; _r->regs[21]=0; _r->regs[22]=0; _r->regs[23]=0; \
-       _r->regs[24]=0; _r->regs[25]=0; _r->regs[26]=0; _r->regs[27]=0; \
-       _r->regs[28]=0; _r->regs[29]=0; _r->regs[30]=0; _r->regs[31]=0; \
-       _r->regs[32]=0; _r->regs[33]=0; _r->regs[34]=0; _r->regs[35]=0; \
-       _r->regs[36]=0; _r->regs[37]=0; _r->regs[38]=0; _r->regs[39]=0; \
-       _r->regs[40]=0; _r->regs[41]=0; _r->regs[42]=0; _r->regs[43]=0; \
-       _r->regs[44]=0; _r->regs[45]=0; _r->regs[46]=0; _r->regs[47]=0; \
-       _r->regs[48]=0; _r->regs[49]=0; _r->regs[50]=0; _r->regs[51]=0; \
-       _r->regs[52]=0; _r->regs[53]=0; _r->regs[54]=0; _r->regs[55]=0; \
-       _r->regs[56]=0; _r->regs[57]=0; _r->regs[58]=0; _r->regs[59]=0; \
-       _r->regs[60]=0; _r->regs[61]=0; _r->regs[62]=0; \
-       _r->tregs[0]=0; _r->tregs[1]=0; _r->tregs[2]=0; _r->tregs[3]=0; \
-       _r->tregs[4]=0; _r->tregs[5]=0; _r->tregs[6]=0; _r->tregs[7]=0; \
-       _r->sr = SR_FD | SR_MMU; } while (0)
-#else
-#define ELF_PLAT_INIT(_r, load_addr) \
-  do { _r->regs[0]=0; _r->regs[1]=0; _r->regs[2]=0; _r->regs[3]=0; \
-       _r->regs[4]=0; _r->regs[5]=0; _r->regs[6]=0; _r->regs[7]=0; \
-       _r->regs[8]=0; _r->regs[9]=0; _r->regs[10]=0; _r->regs[11]=0; \
-       _r->regs[12]=0; _r->regs[13]=0; _r->regs[14]=0; \
-       _r->sr = SR_FD; } while (0)
-#endif
-
-#define SET_PERSONALITY(ex, ibcs2) set_personality(PER_LINUX_32BIT)
-struct task_struct;
-extern int dump_task_regs (struct task_struct *, elf_gregset_t *);
-extern int dump_task_fpu (struct task_struct *, elf_fpregset_t *);
-
-#define ELF_CORE_COPY_TASK_REGS(tsk, elf_regs) dump_task_regs(tsk, elf_regs)
-#define ELF_CORE_COPY_FPREGS(tsk, elf_fpregs) dump_task_fpu(tsk, elf_fpregs)
-
-#ifdef CONFIG_VSYSCALL
-/* vDSO has arch_setup_additional_pages */
-#define ARCH_HAS_SETUP_ADDITIONAL_PAGES
-struct linux_binprm;
-extern int arch_setup_additional_pages(struct linux_binprm *bprm,
-				       int executable_stack);
-
-extern unsigned int vdso_enabled;
-extern void __kernel_vsyscall;
-
-#define VDSO_BASE		((unsigned long)current->mm->context.vdso)
-#define VDSO_SYM(x)		(VDSO_BASE + (unsigned long)(x))
-
-#define VSYSCALL_AUX_ENT					\
-	if (vdso_enabled)					\
-		NEW_AUX_ENT(AT_SYSINFO_EHDR, VDSO_BASE);
-#else
-#define VSYSCALL_AUX_ENT
-#endif /* CONFIG_VSYSCALL */
-
-#ifdef CONFIG_SH_FPU
-#define FPU_AUX_ENT	NEW_AUX_ENT(AT_FPUCW, FPSCR_INIT)
-#else
-#define FPU_AUX_ENT
-#endif
-
-extern int l1i_cache_shape, l1d_cache_shape, l2_cache_shape;
-
-/* update AT_VECTOR_SIZE_ARCH if the number of NEW_AUX_ENT entries changes */
-#define ARCH_DLINFO						\
-do {								\
-	/* Optional FPU initialization */			\
-	FPU_AUX_ENT;						\
-								\
-	/* Optional vsyscall entry */				\
-	VSYSCALL_AUX_ENT;					\
-								\
-	/* Cache desc */					\
-	NEW_AUX_ENT(AT_L1I_CACHESHAPE, l1i_cache_shape);	\
-	NEW_AUX_ENT(AT_L1D_CACHESHAPE, l1d_cache_shape);	\
-	NEW_AUX_ENT(AT_L2_CACHESHAPE, l2_cache_shape);		\
-} while (0)
-
-#endif /* __KERNEL__ */
-#endif /* __ASM_SH_ELF_H */
diff --git a/include/asm-sh/flat.h b/include/asm-sh/flat.h
deleted file mode 100644
index 0cc800299e06..000000000000
--- a/include/asm-sh/flat.h
+++ /dev/null
@@ -1,24 +0,0 @@
-/*
- * include/asm-sh/flat.h
- *
- * uClinux flat-format executables
- *
- * Copyright (C) 2003  Paul Mundt
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive for
- * more details.
- */
-#ifndef __ASM_SH_FLAT_H
-#define __ASM_SH_FLAT_H
-
-#define	flat_stack_align(sp)			/* nothing needed */
-#define	flat_argvp_envp_on_stack()		0
-#define	flat_old_ram_flag(flags)		(flags)
-#define	flat_reloc_valid(reloc, size)		((reloc) <= (size))
-#define	flat_get_addr_from_rp(rp, relval, flags, p)	get_unaligned(rp)
-#define	flat_put_addr_at_rp(rp, val, relval)	put_unaligned(val,rp)
-#define	flat_get_relocate_addr(rel)		(rel)
-#define	flat_set_persistent(relval, p)		({ (void)p; 0; })
-
-#endif /* __ASM_SH_FLAT_H */
diff --git a/include/asm-sh/freq.h b/include/asm-sh/freq.h
deleted file mode 100644
index 39c0e091cf58..000000000000
--- a/include/asm-sh/freq.h
+++ /dev/null
@@ -1,18 +0,0 @@
-/*
- * include/asm-sh/freq.h
- *
- * Copyright (C) 2002, 2003 Paul Mundt
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- */
-#ifndef __ASM_SH_FREQ_H
-#define __ASM_SH_FREQ_H
-#ifdef __KERNEL__
-
-#include <asm/cpu/freq.h>
-
-#endif /* __KERNEL__ */
-#endif /* __ASM_SH_FREQ_H */
diff --git a/include/asm-sh/gpio.h b/include/asm-sh/gpio.h
deleted file mode 100644
index 9bb27e0f11a4..000000000000
--- a/include/asm-sh/gpio.h
+++ /dev/null
@@ -1,19 +0,0 @@
-/*
- *  include/asm-sh/gpio.h
- *
- *  Copyright (C) 2007 Markus Brunner, Mark Jonas
- *
- *  Addresses for the Pin Function Controller
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-#ifndef __ASM_SH_GPIO_H
-#define __ASM_SH_GPIO_H
-
-#if defined(CONFIG_CPU_SH3)
-#include <asm/cpu/gpio.h>
-#endif
-
-#endif /* __ASM_SH_GPIO_H */
diff --git a/include/asm-sh/hw_irq.h b/include/asm-sh/hw_irq.h
deleted file mode 100644
index 7438d1e21bc9..000000000000
--- a/include/asm-sh/hw_irq.h
+++ /dev/null
@@ -1,123 +0,0 @@
-#ifndef __ASM_SH_HW_IRQ_H
-#define __ASM_SH_HW_IRQ_H
-
-#include <linux/init.h>
-#include <asm/atomic.h>
-
-extern atomic_t irq_err_count;
-
-struct ipr_data {
-	unsigned char irq;
-	unsigned char ipr_idx;		/* Index for the IPR registered */
-	unsigned char shift;		/* Number of bits to shift the data */
-	unsigned char priority;		/* The priority */
-};
-
-struct ipr_desc {
-	unsigned long *ipr_offsets;
-	unsigned int nr_offsets;
-	struct ipr_data *ipr_data;
-	unsigned int nr_irqs;
-	struct irq_chip chip;
-};
-
-void register_ipr_controller(struct ipr_desc *);
-
-typedef unsigned char intc_enum;
-
-struct intc_vect {
-	intc_enum enum_id;
-	unsigned short vect;
-};
-
-#define INTC_VECT(enum_id, vect) { enum_id, vect }
-#define INTC_IRQ(enum_id, irq) INTC_VECT(enum_id, irq2evt(irq))
-
-struct intc_group {
-	intc_enum enum_id;
-	intc_enum enum_ids[32];
-};
-
-#define INTC_GROUP(enum_id, ids...) { enum_id, { ids } }
-
-struct intc_mask_reg {
-	unsigned long set_reg, clr_reg, reg_width;
-	intc_enum enum_ids[32];
-#ifdef CONFIG_SMP
-	unsigned long smp;
-#endif
-};
-
-struct intc_prio_reg {
-	unsigned long set_reg, clr_reg, reg_width, field_width;
-	intc_enum enum_ids[16];
-#ifdef CONFIG_SMP
-	unsigned long smp;
-#endif
-};
-
-struct intc_sense_reg {
-	unsigned long reg, reg_width, field_width;
-	intc_enum enum_ids[16];
-};
-
-#ifdef CONFIG_SMP
-#define INTC_SMP(stride, nr) .smp = (stride) | ((nr) << 8)
-#else
-#define INTC_SMP(stride, nr)
-#endif
-
-struct intc_desc {
-	struct intc_vect *vectors;
-	unsigned int nr_vectors;
-	struct intc_group *groups;
-	unsigned int nr_groups;
-	struct intc_mask_reg *mask_regs;
-	unsigned int nr_mask_regs;
-	struct intc_prio_reg *prio_regs;
-	unsigned int nr_prio_regs;
-	struct intc_sense_reg *sense_regs;
-	unsigned int nr_sense_regs;
-	char *name;
-#ifdef CONFIG_CPU_SH3
-	struct intc_mask_reg *ack_regs;
-	unsigned int nr_ack_regs;
-#endif
-};
-
-#define _INTC_ARRAY(a) a, sizeof(a)/sizeof(*a)
-#define DECLARE_INTC_DESC(symbol, chipname, vectors, groups,		\
-	mask_regs, prio_regs, sense_regs)				\
-struct intc_desc symbol __initdata = {					\
-	_INTC_ARRAY(vectors), _INTC_ARRAY(groups),			\
-	_INTC_ARRAY(mask_regs), _INTC_ARRAY(prio_regs),			\
-	_INTC_ARRAY(sense_regs),					\
-	chipname,							\
-}
-
-#ifdef CONFIG_CPU_SH3
-#define DECLARE_INTC_DESC_ACK(symbol, chipname, vectors, groups,	\
-	mask_regs, prio_regs, sense_regs, ack_regs)			\
-struct intc_desc symbol __initdata = {					\
-	_INTC_ARRAY(vectors), _INTC_ARRAY(groups),			\
-	_INTC_ARRAY(mask_regs), _INTC_ARRAY(prio_regs),			\
-	_INTC_ARRAY(sense_regs),					\
-	chipname,							\
-	_INTC_ARRAY(ack_regs),						\
-}
-#endif
-
-void __init register_intc_controller(struct intc_desc *desc);
-int intc_set_priority(unsigned int irq, unsigned int prio);
-
-void __init plat_irq_setup(void);
-#ifdef CONFIG_CPU_SH3
-void __init plat_irq_setup_sh3(void);
-#endif
-
-enum { IRQ_MODE_IRQ, IRQ_MODE_IRQ7654, IRQ_MODE_IRQ3210,
-       IRQ_MODE_IRL7654_MASK, IRQ_MODE_IRL3210_MASK,
-       IRQ_MODE_IRL7654, IRQ_MODE_IRL3210 };
-void __init plat_irq_setup_pins(int mode);
-
-#endif /* __ASM_SH_HW_IRQ_H */
diff --git a/include/asm-sh/irq.h b/include/asm-sh/irq.h
deleted file mode 100644
index ca66e5df69dc..000000000000
--- a/include/asm-sh/irq.h
+++ /dev/null
@@ -1,57 +0,0 @@
-#ifndef __ASM_SH_IRQ_H
-#define __ASM_SH_IRQ_H
-
-#include <asm/machvec.h>
-
-/*
- * A sane default based on a reasonable vector table size, platforms are
- * advised to cap this at the hard limit that they're interested in
- * through the machvec.
- */
-#define NR_IRQS 256
-
-/*
- * Convert back and forth between INTEVT and IRQ values.
- */
-#ifdef CONFIG_CPU_HAS_INTEVT
-#define evt2irq(evt)		(((evt) >> 5) - 16)
-#define irq2evt(irq)		(((irq) + 16) << 5)
-#else
-#define evt2irq(evt)		(evt)
-#define irq2evt(irq)		(irq)
-#endif
-
-/*
- * Simple Mask Register Support
- */
-extern void make_maskreg_irq(unsigned int irq);
-extern unsigned short *irq_mask_register;
-
-/*
- * PINT IRQs
- */
-void init_IRQ_pint(void);
-void make_imask_irq(unsigned int irq);
-
-static inline int generic_irq_demux(int irq)
-{
-	return irq;
-}
-
-#define irq_canonicalize(irq)	(irq)
-#define irq_demux(irq)		sh_mv.mv_irq_demux(irq)
-
-#ifdef CONFIG_IRQSTACKS
-extern void irq_ctx_init(int cpu);
-extern void irq_ctx_exit(int cpu);
-# define __ARCH_HAS_DO_SOFTIRQ
-#else
-# define irq_ctx_init(cpu) do { } while (0)
-# define irq_ctx_exit(cpu) do { } while (0)
-#endif
-
-#ifdef CONFIG_CPU_SH5
-#include <asm/cpu/irq.h>
-#endif
-
-#endif /* __ASM_SH_IRQ_H */
diff --git a/include/asm-sh/irqflags_64.h b/include/asm-sh/irqflags_64.h
deleted file mode 100644
index 4f6b8a56e7bd..000000000000
--- a/include/asm-sh/irqflags_64.h
+++ /dev/null
@@ -1,85 +0,0 @@
-#ifndef __ASM_SH_IRQFLAGS_64_H
-#define __ASM_SH_IRQFLAGS_64_H
-
-#include <asm/cpu/registers.h>
-
-#define SR_MASK_LL	0x00000000000000f0LL
-#define SR_BL_LL	0x0000000010000000LL
-
-static inline void raw_local_irq_enable(void)
-{
-	unsigned long long __dummy0, __dummy1 = ~SR_MASK_LL;
-
-	__asm__ __volatile__("getcon	" __SR ", %0\n\t"
-			     "and	%0, %1, %0\n\t"
-			     "putcon	%0, " __SR "\n\t"
-			     : "=&r" (__dummy0)
-			     : "r" (__dummy1));
-}
-
-static inline void raw_local_irq_disable(void)
-{
-	unsigned long long __dummy0, __dummy1 = SR_MASK_LL;
-
-	__asm__ __volatile__("getcon	" __SR ", %0\n\t"
-			     "or	%0, %1, %0\n\t"
-			     "putcon	%0, " __SR "\n\t"
-			     : "=&r" (__dummy0)
-			     : "r" (__dummy1));
-}
-
-static inline void set_bl_bit(void)
-{
-	unsigned long long __dummy0, __dummy1 = SR_BL_LL;
-
-	__asm__ __volatile__("getcon	" __SR ", %0\n\t"
-			     "or	%0, %1, %0\n\t"
-			     "putcon	%0, " __SR "\n\t"
-			     : "=&r" (__dummy0)
-			     : "r" (__dummy1));
-
-}
-
-static inline void clear_bl_bit(void)
-{
-	unsigned long long __dummy0, __dummy1 = ~SR_BL_LL;
-
-	__asm__ __volatile__("getcon	" __SR ", %0\n\t"
-			     "and	%0, %1, %0\n\t"
-			     "putcon	%0, " __SR "\n\t"
-			     : "=&r" (__dummy0)
-			     : "r" (__dummy1));
-}
-
-static inline unsigned long __raw_local_save_flags(void)
-{
-	unsigned long long __dummy = SR_MASK_LL;
-	unsigned long flags;
-
-	__asm__ __volatile__ (
-		"getcon	" __SR ", %0\n\t"
-		"and	%0, %1, %0"
-		: "=&r" (flags)
-		: "r" (__dummy));
-
-	return flags;
-}
-
-static inline unsigned long __raw_local_irq_save(void)
-{
-	unsigned long long __dummy0, __dummy1 = SR_MASK_LL;
-	unsigned long flags;
-
-	__asm__ __volatile__ (
-		"getcon	" __SR ", %1\n\t"
-		"or	%1, r63, %0\n\t"
-		"or	%1, %2, %1\n\t"
-		"putcon	%1, " __SR "\n\t"
-		"and	%0, %2, %0"
-		: "=&r" (flags), "=&r" (__dummy0)
-		: "r" (__dummy1));
-
-	return flags;
-}
-
-#endif /* __ASM_SH_IRQFLAGS_64_H */
diff --git a/include/asm-sh/kexec.h b/include/asm-sh/kexec.h
deleted file mode 100644
index 00f4260ef09b..000000000000
--- a/include/asm-sh/kexec.h
+++ /dev/null
@@ -1,62 +0,0 @@
-#ifndef __ASM_SH_KEXEC_H
-#define __ASM_SH_KEXEC_H
-
-#include <asm/ptrace.h>
-#include <asm/string.h>
-
-/*
- * KEXEC_SOURCE_MEMORY_LIMIT maximum page get_free_page can return.
- * I.e. Maximum page that is mapped directly into kernel memory,
- * and kmap is not required.
- *
- * Someone correct me if FIXADDR_START - PAGEOFFSET is not the correct
- * calculation for the amount of memory directly mappable into the
- * kernel memory space.
- */
-
-/* Maximum physical address we can use pages from */
-#define KEXEC_SOURCE_MEMORY_LIMIT (-1UL)
-/* Maximum address we can reach in physical address mode */
-#define KEXEC_DESTINATION_MEMORY_LIMIT (-1UL)
-/* Maximum address we can use for the control code buffer */
-#define KEXEC_CONTROL_MEMORY_LIMIT TASK_SIZE
-
-#define KEXEC_CONTROL_CODE_SIZE	4096
-
-/* The native architecture */
-#define KEXEC_ARCH KEXEC_ARCH_SH
-
-static inline void crash_setup_regs(struct pt_regs *newregs,
-				    struct pt_regs *oldregs)
-{
-	if (oldregs)
-		memcpy(newregs, oldregs, sizeof(*newregs));
-	else {
-		__asm__ __volatile__ ("mov r0, %0" : "=r" (newregs->regs[0]));
-		__asm__ __volatile__ ("mov r1, %0" : "=r" (newregs->regs[1]));
-		__asm__ __volatile__ ("mov r2, %0" : "=r" (newregs->regs[2]));
-		__asm__ __volatile__ ("mov r3, %0" : "=r" (newregs->regs[3]));
-		__asm__ __volatile__ ("mov r4, %0" : "=r" (newregs->regs[4]));
-		__asm__ __volatile__ ("mov r5, %0" : "=r" (newregs->regs[5]));
-		__asm__ __volatile__ ("mov r6, %0" : "=r" (newregs->regs[6]));
-		__asm__ __volatile__ ("mov r7, %0" : "=r" (newregs->regs[7]));
-		__asm__ __volatile__ ("mov r8, %0" : "=r" (newregs->regs[8]));
-		__asm__ __volatile__ ("mov r9, %0" : "=r" (newregs->regs[9]));
-		__asm__ __volatile__ ("mov r10, %0" : "=r" (newregs->regs[10]));
-		__asm__ __volatile__ ("mov r11, %0" : "=r" (newregs->regs[11]));
-		__asm__ __volatile__ ("mov r12, %0" : "=r" (newregs->regs[12]));
-		__asm__ __volatile__ ("mov r13, %0" : "=r" (newregs->regs[13]));
-		__asm__ __volatile__ ("mov r14, %0" : "=r" (newregs->regs[14]));
-		__asm__ __volatile__ ("mov r15, %0" : "=r" (newregs->regs[15]));
-
-		__asm__ __volatile__ ("sts pr, %0" : "=r" (newregs->pr));
-		__asm__ __volatile__ ("sts macl, %0" : "=r" (newregs->macl));
-		__asm__ __volatile__ ("sts mach, %0" : "=r" (newregs->mach));
-
-		__asm__ __volatile__ ("stc gbr, %0" : "=r" (newregs->gbr));
-		__asm__ __volatile__ ("stc sr, %0" : "=r" (newregs->sr));
-
-		newregs->pc = (unsigned long)current_text_addr();
-	}
-}
-#endif /* __ASM_SH_KEXEC_H */
diff --git a/include/asm-sh/kvm.h b/include/asm-sh/kvm.h
deleted file mode 100644
index 6af51dbab2d0..000000000000
--- a/include/asm-sh/kvm.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef __LINUX_KVM_SH_H
-#define __LINUX_KVM_SH_H
-
-/* sh does not support KVM */
-
-#endif
diff --git a/include/asm-sh/mmu.h b/include/asm-sh/mmu.h
deleted file mode 100644
index eb0358c097d0..000000000000
--- a/include/asm-sh/mmu.h
+++ /dev/null
@@ -1,72 +0,0 @@
-#ifndef __MMU_H
-#define __MMU_H
-
-/* Default "unsigned long" context */
-typedef unsigned long mm_context_id_t[NR_CPUS];
-
-typedef struct {
-#ifdef CONFIG_MMU
-	mm_context_id_t		id;
-	void			*vdso;
-#else
-	struct vm_list_struct	*vmlist;
-	unsigned long		end_brk;
-#endif
-} mm_context_t;
-
-/*
- * Privileged Space Mapping Buffer (PMB) definitions
- */
-#define PMB_PASCR		0xff000070
-#define PMB_IRMCR		0xff000078
-
-#define PMB_ADDR		0xf6100000
-#define PMB_DATA		0xf7100000
-#define PMB_ENTRY_MAX		16
-#define PMB_E_MASK		0x0000000f
-#define PMB_E_SHIFT		8
-
-#define PMB_SZ_16M		0x00000000
-#define PMB_SZ_64M		0x00000010
-#define PMB_SZ_128M		0x00000080
-#define PMB_SZ_512M		0x00000090
-#define PMB_SZ_MASK		PMB_SZ_512M
-#define PMB_C			0x00000008
-#define PMB_WT			0x00000001
-#define PMB_UB			0x00000200
-#define PMB_V			0x00000100
-
-#define PMB_NO_ENTRY		(-1)
-
-struct pmb_entry;
-
-struct pmb_entry {
-	unsigned long vpn;
-	unsigned long ppn;
-	unsigned long flags;
-
-	/*
-	 * 0 .. NR_PMB_ENTRIES for specific entry selection, or
-	 * PMB_NO_ENTRY to search for a free one
-	 */
-	int entry;
-
-	struct pmb_entry *next;
-	/* Adjacent entry link for contiguous multi-entry mappings */
-	struct pmb_entry *link;
-};
-
-/* arch/sh/mm/pmb.c */
-int __set_pmb_entry(unsigned long vpn, unsigned long ppn,
-		    unsigned long flags, int *entry);
-int set_pmb_entry(struct pmb_entry *pmbe);
-void clear_pmb_entry(struct pmb_entry *pmbe);
-struct pmb_entry *pmb_alloc(unsigned long vpn, unsigned long ppn,
-			    unsigned long flags);
-void pmb_free(struct pmb_entry *pmbe);
-long pmb_remap(unsigned long virt, unsigned long phys,
-	       unsigned long size, unsigned long flags);
-void pmb_unmap(unsigned long addr);
-
-#endif /* __MMU_H */
-
diff --git a/include/asm-sh/mmu_context.h b/include/asm-sh/mmu_context.h
deleted file mode 100644
index 87e812f68bb0..000000000000
--- a/include/asm-sh/mmu_context.h
+++ /dev/null
@@ -1,184 +0,0 @@
-/*
- * Copyright (C) 1999 Niibe Yutaka
- * Copyright (C) 2003 - 2007 Paul Mundt
- *
- * ASID handling idea taken from MIPS implementation.
- */
-#ifndef __ASM_SH_MMU_CONTEXT_H
-#define __ASM_SH_MMU_CONTEXT_H
-
-#ifdef __KERNEL__
-#include <asm/cpu/mmu_context.h>
-#include <asm/tlbflush.h>
-#include <asm/uaccess.h>
-#include <asm/io.h>
-#include <asm-generic/mm_hooks.h>
-
-/*
- * The MMU "context" consists of two things:
- *    (a) TLB cache version (or round, cycle whatever expression you like)
- *    (b) ASID (Address Space IDentifier)
- */
-#define MMU_CONTEXT_ASID_MASK		0x000000ff
-#define MMU_CONTEXT_VERSION_MASK	0xffffff00
-#define MMU_CONTEXT_FIRST_VERSION	0x00000100
-#define NO_CONTEXT			0
-
-/* ASID is 8-bit value, so it can't be 0x100 */
-#define MMU_NO_ASID			0x100
-
-#ifdef CONFIG_MMU
-#define asid_cache(cpu)		(cpu_data[cpu].asid_cache)
-#define cpu_context(cpu, mm)	((mm)->context.id[cpu])
-
-#define cpu_asid(cpu, mm)	\
-	(cpu_context((cpu), (mm)) & MMU_CONTEXT_ASID_MASK)
-
-/*
- * Virtual Page Number mask
- */
-#define MMU_VPN_MASK	0xfffff000
-
-#if defined(CONFIG_SUPERH32)
-#include "mmu_context_32.h"
-#else
-#include "mmu_context_64.h"
-#endif
-
-/*
- * Get MMU context if needed.
- */
-static inline void get_mmu_context(struct mm_struct *mm, unsigned int cpu)
-{
-	unsigned long asid = asid_cache(cpu);
-
-	/* Check if we have old version of context. */
-	if (((cpu_context(cpu, mm) ^ asid) & MMU_CONTEXT_VERSION_MASK) == 0)
-		/* It's up to date, do nothing */
-		return;
-
-	/* It's old, we need to get new context with new version. */
-	if (!(++asid & MMU_CONTEXT_ASID_MASK)) {
-		/*
-		 * We exhaust ASID of this version.
-		 * Flush all TLB and start new cycle.
-		 */
-		flush_tlb_all();
-
-#ifdef CONFIG_SUPERH64
-		/*
-		 * The SH-5 cache uses the ASIDs, requiring both the I and D
-		 * cache to be flushed when the ASID is exhausted. Weak.
-		 */
-		flush_cache_all();
-#endif
-
-		/*
-		 * Fix version; Note that we avoid version #0
-		 * to distingush NO_CONTEXT.
-		 */
-		if (!asid)
-			asid = MMU_CONTEXT_FIRST_VERSION;
-	}
-
-	cpu_context(cpu, mm) = asid_cache(cpu) = asid;
-}
-
-/*
- * Initialize the context related info for a new mm_struct
- * instance.
- */
-static inline int init_new_context(struct task_struct *tsk,
-				   struct mm_struct *mm)
-{
-	int i;
-
-	for (i = 0; i < num_online_cpus(); i++)
-		cpu_context(i, mm) = NO_CONTEXT;
-
-	return 0;
-}
-
-/*
- * After we have set current->mm to a new value, this activates
- * the context for the new mm so we see the new mappings.
- */
-static inline void activate_context(struct mm_struct *mm, unsigned int cpu)
-{
-	get_mmu_context(mm, cpu);
-	set_asid(cpu_asid(cpu, mm));
-}
-
-static inline void switch_mm(struct mm_struct *prev,
-			     struct mm_struct *next,
-			     struct task_struct *tsk)
-{
-	unsigned int cpu = smp_processor_id();
-
-	if (likely(prev != next)) {
-		cpu_set(cpu, next->cpu_vm_mask);
-		set_TTB(next->pgd);
-		activate_context(next, cpu);
-	} else
-		if (!cpu_test_and_set(cpu, next->cpu_vm_mask))
-			activate_context(next, cpu);
-}
-#else
-#define get_mmu_context(mm)		do { } while (0)
-#define init_new_context(tsk,mm)	(0)
-#define destroy_context(mm)		do { } while (0)
-#define set_asid(asid)			do { } while (0)
-#define get_asid()			(0)
-#define cpu_asid(cpu, mm)		({ (void)cpu; 0; })
-#define switch_and_save_asid(asid)	(0)
-#define set_TTB(pgd)			do { } while (0)
-#define get_TTB()			(0)
-#define activate_context(mm,cpu)	do { } while (0)
-#define switch_mm(prev,next,tsk)	do { } while (0)
-#endif /* CONFIG_MMU */
-
-#define activate_mm(prev, next)		switch_mm((prev),(next),NULL)
-#define deactivate_mm(tsk,mm)		do { } while (0)
-#define enter_lazy_tlb(mm,tsk)		do { } while (0)
-
-#if defined(CONFIG_CPU_SH3) || defined(CONFIG_CPU_SH4)
-/*
- * If this processor has an MMU, we need methods to turn it off/on ..
- * paging_init() will also have to be updated for the processor in
- * question.
- */
-static inline void enable_mmu(void)
-{
-	unsigned int cpu = smp_processor_id();
-
-	/* Enable MMU */
-	ctrl_outl(MMU_CONTROL_INIT, MMUCR);
-	ctrl_barrier();
-
-	if (asid_cache(cpu) == NO_CONTEXT)
-		asid_cache(cpu) = MMU_CONTEXT_FIRST_VERSION;
-
-	set_asid(asid_cache(cpu) & MMU_CONTEXT_ASID_MASK);
-}
-
-static inline void disable_mmu(void)
-{
-	unsigned long cr;
-
-	cr = ctrl_inl(MMUCR);
-	cr &= ~MMU_CONTROL_INIT;
-	ctrl_outl(cr, MMUCR);
-
-	ctrl_barrier();
-}
-#else
-/*
- * MMU control handlers for processors lacking memory
- * management hardware.
- */
-#define enable_mmu()	do { } while (0)
-#define disable_mmu()	do { } while (0)
-#endif
-
-#endif /* __KERNEL__ */
-#endif /* __ASM_SH_MMU_CONTEXT_H */
diff --git a/include/asm-sh/namei.h b/include/asm-sh/namei.h
deleted file mode 100644
index 338a5d947143..000000000000
--- a/include/asm-sh/namei.h
+++ /dev/null
@@ -1,17 +0,0 @@
-/* $Id: namei.h,v 1.3 2000/07/04 06:24:49 gniibe Exp $
- * linux/include/asm-sh/namei.h
- *
- * Included from linux/fs/namei.c
- */
-
-#ifndef __ASM_SH_NAMEI_H
-#define __ASM_SH_NAMEI_H
-
-/* This dummy routine maybe changed to something useful
- * for /usr/gnemul/ emulation stuff.
- * Look at asm-sparc/namei.h for details.
- */
-
-#define __emul_prefix() NULL
-
-#endif /* __ASM_SH_NAMEI_H */
diff --git a/include/asm-sh/page.h b/include/asm-sh/page.h
deleted file mode 100644
index 5dc01d2fcc4c..000000000000
--- a/include/asm-sh/page.h
+++ /dev/null
@@ -1,181 +0,0 @@
-#ifndef __ASM_SH_PAGE_H
-#define __ASM_SH_PAGE_H
-
-/*
- * Copyright (C) 1999  Niibe Yutaka
- */
-
-#include <linux/const.h>
-
-/* PAGE_SHIFT determines the page size */
-#if defined(CONFIG_PAGE_SIZE_4KB)
-# define PAGE_SHIFT	12
-#elif defined(CONFIG_PAGE_SIZE_8KB)
-# define PAGE_SHIFT	13
-#elif defined(CONFIG_PAGE_SIZE_64KB)
-# define PAGE_SHIFT	16
-#else
-# error "Bogus kernel page size?"
-#endif
-
-#define PAGE_SIZE	(_AC(1, UL) << PAGE_SHIFT)
-#define PAGE_MASK	(~(PAGE_SIZE-1))
-#define PTE_MASK	PAGE_MASK
-
-#if defined(CONFIG_HUGETLB_PAGE_SIZE_64K)
-#define HPAGE_SHIFT	16
-#elif defined(CONFIG_HUGETLB_PAGE_SIZE_256K)
-#define HPAGE_SHIFT	18
-#elif defined(CONFIG_HUGETLB_PAGE_SIZE_1MB)
-#define HPAGE_SHIFT	20
-#elif defined(CONFIG_HUGETLB_PAGE_SIZE_4MB)
-#define HPAGE_SHIFT	22
-#elif defined(CONFIG_HUGETLB_PAGE_SIZE_64MB)
-#define HPAGE_SHIFT	26
-#elif defined(CONFIG_HUGETLB_PAGE_SIZE_512MB)
-#define HPAGE_SHIFT	29
-#endif
-
-#ifdef CONFIG_HUGETLB_PAGE
-#define HPAGE_SIZE		(1UL << HPAGE_SHIFT)
-#define HPAGE_MASK		(~(HPAGE_SIZE-1))
-#define HUGETLB_PAGE_ORDER	(HPAGE_SHIFT-PAGE_SHIFT)
-#endif
-
-#ifndef __ASSEMBLY__
-
-extern unsigned long shm_align_mask;
-extern unsigned long max_low_pfn, min_low_pfn;
-extern unsigned long memory_start, memory_end;
-
-extern void clear_page(void *to);
-extern void copy_page(void *to, void *from);
-
-#if !defined(CONFIG_CACHE_OFF) && defined(CONFIG_MMU) && \
-	(defined(CONFIG_CPU_SH5) || defined(CONFIG_CPU_SH4) || \
-	 defined(CONFIG_SH7705_CACHE_32KB))
-struct page;
-struct vm_area_struct;
-extern void clear_user_page(void *to, unsigned long address, struct page *page);
-extern void copy_user_page(void *to, void *from, unsigned long address,
-			   struct page *page);
-#if defined(CONFIG_CPU_SH4)
-extern void copy_user_highpage(struct page *to, struct page *from,
-			       unsigned long vaddr, struct vm_area_struct *vma);
-#define __HAVE_ARCH_COPY_USER_HIGHPAGE
-#endif
-#else
-#define clear_user_page(page, vaddr, pg)	clear_page(page)
-#define copy_user_page(to, from, vaddr, pg)	copy_page(to, from)
-#endif
-
-/*
- * These are used to make use of C type-checking..
- */
-#ifdef CONFIG_X2TLB
-typedef struct { unsigned long pte_low, pte_high; } pte_t;
-typedef struct { unsigned long long pgprot; } pgprot_t;
-typedef struct { unsigned long long pgd; } pgd_t;
-#define pte_val(x) \
-	((x).pte_low | ((unsigned long long)(x).pte_high << 32))
-#define __pte(x) \
-	({ pte_t __pte = {(x), ((unsigned long long)(x)) >> 32}; __pte; })
-#elif defined(CONFIG_SUPERH32)
-typedef struct { unsigned long pte_low; } pte_t;
-typedef struct { unsigned long pgprot; } pgprot_t;
-typedef struct { unsigned long pgd; } pgd_t;
-#define pte_val(x)	((x).pte_low)
-#define __pte(x)	((pte_t) { (x) } )
-#else
-typedef struct { unsigned long long pte_low; } pte_t;
-typedef struct { unsigned long pgprot; } pgprot_t;
-typedef struct { unsigned long pgd; } pgd_t;
-#define pte_val(x)	((x).pte_low)
-#define __pte(x)	((pte_t) { (x) } )
-#endif
-
-#define pgd_val(x)	((x).pgd)
-#define pgprot_val(x)	((x).pgprot)
-
-#define __pgd(x) ((pgd_t) { (x) } )
-#define __pgprot(x)	((pgprot_t) { (x) } )
-
-typedef struct page *pgtable_t;
-
-#endif /* !__ASSEMBLY__ */
-
-/*
- * __MEMORY_START and SIZE are the physical addresses and size of RAM.
- */
-#define __MEMORY_START		CONFIG_MEMORY_START
-#define __MEMORY_SIZE		CONFIG_MEMORY_SIZE
-
-/*
- * PAGE_OFFSET is the virtual address of the start of kernel address
- * space.
- */
-#define PAGE_OFFSET		CONFIG_PAGE_OFFSET
-
-/*
- * Virtual to physical RAM address translation.
- *
- * In 29 bit mode, the physical offset of RAM from address 0 is visible in
- * the kernel virtual address space, and thus we don't have to take
- * this into account when translating. However in 32 bit mode this offset
- * is not visible (it is part of the PMB mapping) and so needs to be
- * added or subtracted as required.
- */
-#ifdef CONFIG_32BIT
-#define __pa(x)	((unsigned long)(x)-PAGE_OFFSET+__MEMORY_START)
-#define __va(x)	((void *)((unsigned long)(x)+PAGE_OFFSET-__MEMORY_START))
-#else
-#define __pa(x)	((unsigned long)(x)-PAGE_OFFSET)
-#define __va(x)	((void *)((unsigned long)(x)+PAGE_OFFSET))
-#endif
-
-#define pfn_to_kaddr(pfn)	__va((pfn) << PAGE_SHIFT)
-#define page_to_phys(page)	(page_to_pfn(page) << PAGE_SHIFT)
-
-/*
- * PFN = physical frame number (ie PFN 0 == physical address 0)
- * PFN_START is the PFN of the first page of RAM. By defining this we
- * don't have struct page entries for the portion of address space
- * between physical address 0 and the start of RAM.
- */
-#define PFN_START		(__MEMORY_START >> PAGE_SHIFT)
-#define ARCH_PFN_OFFSET		(PFN_START)
-#define virt_to_page(kaddr)	pfn_to_page(__pa(kaddr) >> PAGE_SHIFT)
-#ifdef CONFIG_FLATMEM
-#define pfn_valid(pfn)		((pfn) >= min_low_pfn && (pfn) < max_low_pfn)
-#endif
-#define virt_addr_valid(kaddr)	pfn_valid(__pa(kaddr) >> PAGE_SHIFT)
-
-#define VM_DATA_DEFAULT_FLAGS	(VM_READ | VM_WRITE | VM_EXEC | \
-				 VM_MAYREAD | VM_MAYWRITE | VM_MAYEXEC)
-
-#include <asm-generic/memory_model.h>
-#include <asm-generic/page.h>
-
-/* vDSO support */
-#ifdef CONFIG_VSYSCALL
-#define __HAVE_ARCH_GATE_AREA
-#endif
-
-/*
- * Some drivers need to perform DMA into kmalloc'ed buffers
- * and so we have to increase the kmalloc minalign for this.
- */
-#define ARCH_KMALLOC_MINALIGN	L1_CACHE_BYTES
-
-#ifdef CONFIG_SUPERH64
-/*
- * While BYTES_PER_WORD == 4 on the current sh64 ABI, GCC will still
- * happily generate {ld/st}.q pairs, requiring us to have 8-byte
- * alignment to avoid traps. The kmalloc alignment is gauranteed by
- * virtue of L1_CACHE_BYTES, requiring this to only be special cased
- * for slab caches.
- */
-#define ARCH_SLAB_MINALIGN	8
-#endif
-
-#endif /* __ASM_SH_PAGE_H */
diff --git a/include/asm-sh/pgtable_32.h b/include/asm-sh/pgtable_32.h
deleted file mode 100644
index cbc731d35c25..000000000000
--- a/include/asm-sh/pgtable_32.h
+++ /dev/null
@@ -1,477 +0,0 @@
-#ifndef __ASM_SH_PGTABLE_32_H
-#define __ASM_SH_PGTABLE_32_H
-
-/*
- * Linux PTEL encoding.
- *
- * Hardware and software bit definitions for the PTEL value (see below for
- * notes on SH-X2 MMUs and 64-bit PTEs):
- *
- * - Bits 0 and 7 are reserved on SH-3 (_PAGE_WT and _PAGE_SZ1 on SH-4).
- *
- * - Bit 1 is the SH-bit, but is unused on SH-3 due to an MMU bug (the
- *   hardware PTEL value can't have the SH-bit set when MMUCR.IX is set,
- *   which is the default in cpu-sh3/mmu_context.h:MMU_CONTROL_INIT).
- *
- *   In order to keep this relatively clean, do not use these for defining
- *   SH-3 specific flags until all of the other unused bits have been
- *   exhausted.
- *
- * - Bit 9 is reserved by everyone and used by _PAGE_PROTNONE.
- *
- * - Bits 10 and 11 are low bits of the PPN that are reserved on >= 4K pages.
- *   Bit 10 is used for _PAGE_ACCESSED, bit 11 remains unused.
- *
- * - On 29 bit platforms, bits 31 to 29 are used for the space attributes
- *   and timing control which (together with bit 0) are moved into the
- *   old-style PTEA on the parts that support it.
- *
- * XXX: Leave the _PAGE_FILE and _PAGE_WT overhaul for a rainy day.
- *
- * SH-X2 MMUs and extended PTEs
- *
- * SH-X2 supports an extended mode TLB with split data arrays due to the
- * number of bits needed for PR and SZ (now EPR and ESZ) encodings. The PR and
- * SZ bit placeholders still exist in data array 1, but are implemented as
- * reserved bits, with the real logic existing in data array 2.
- *
- * The downside to this is that we can no longer fit everything in to a 32-bit
- * PTE encoding, so a 64-bit pte_t is necessary for these parts. On the plus
- * side, this gives us quite a few spare bits to play with for future usage.
- */
-/* Legacy and compat mode bits */
-#define	_PAGE_WT	0x001		/* WT-bit on SH-4, 0 on SH-3 */
-#define _PAGE_HW_SHARED	0x002		/* SH-bit  : shared among processes */
-#define _PAGE_DIRTY	0x004		/* D-bit   : page changed */
-#define _PAGE_CACHABLE	0x008		/* C-bit   : cachable */
-#define _PAGE_SZ0	0x010		/* SZ0-bit : Size of page */
-#define _PAGE_RW	0x020		/* PR0-bit : write access allowed */
-#define _PAGE_USER	0x040		/* PR1-bit : user space access allowed*/
-#define _PAGE_SZ1	0x080		/* SZ1-bit : Size of page (on SH-4) */
-#define _PAGE_PRESENT	0x100		/* V-bit   : page is valid */
-#define _PAGE_PROTNONE	0x200		/* software: if not present  */
-#define _PAGE_ACCESSED	0x400		/* software: page referenced */
-#define _PAGE_FILE	_PAGE_WT	/* software: pagecache or swap? */
-
-#define _PAGE_SZ_MASK	(_PAGE_SZ0 | _PAGE_SZ1)
-#define _PAGE_PR_MASK	(_PAGE_RW | _PAGE_USER)
-
-/* Extended mode bits */
-#define _PAGE_EXT_ESZ0		0x0010	/* ESZ0-bit: Size of page */
-#define _PAGE_EXT_ESZ1		0x0020	/* ESZ1-bit: Size of page */
-#define _PAGE_EXT_ESZ2		0x0040	/* ESZ2-bit: Size of page */
-#define _PAGE_EXT_ESZ3		0x0080	/* ESZ3-bit: Size of page */
-
-#define _PAGE_EXT_USER_EXEC	0x0100	/* EPR0-bit: User space executable */
-#define _PAGE_EXT_USER_WRITE	0x0200	/* EPR1-bit: User space writable */
-#define _PAGE_EXT_USER_READ	0x0400	/* EPR2-bit: User space readable */
-
-#define _PAGE_EXT_KERN_EXEC	0x0800	/* EPR3-bit: Kernel space executable */
-#define _PAGE_EXT_KERN_WRITE	0x1000	/* EPR4-bit: Kernel space writable */
-#define _PAGE_EXT_KERN_READ	0x2000	/* EPR5-bit: Kernel space readable */
-
-/* Wrapper for extended mode pgprot twiddling */
-#define _PAGE_EXT(x)		((unsigned long long)(x) << 32)
-
-/* software: moves to PTEA.TC (Timing Control) */
-#define _PAGE_PCC_AREA5	0x00000000	/* use BSC registers for area5 */
-#define _PAGE_PCC_AREA6	0x80000000	/* use BSC registers for area6 */
-
-/* software: moves to PTEA.SA[2:0] (Space Attributes) */
-#define _PAGE_PCC_IODYN 0x00000001	/* IO space, dynamically sized bus */
-#define _PAGE_PCC_IO8	0x20000000	/* IO space, 8 bit bus */
-#define _PAGE_PCC_IO16	0x20000001	/* IO space, 16 bit bus */
-#define _PAGE_PCC_COM8	0x40000000	/* Common Memory space, 8 bit bus */
-#define _PAGE_PCC_COM16	0x40000001	/* Common Memory space, 16 bit bus */
-#define _PAGE_PCC_ATR8	0x60000000	/* Attribute Memory space, 8 bit bus */
-#define _PAGE_PCC_ATR16	0x60000001	/* Attribute Memory space, 6 bit bus */
-
-/* Mask which drops unused bits from the PTEL value */
-#if defined(CONFIG_CPU_SH3)
-#define _PAGE_CLEAR_FLAGS	(_PAGE_PROTNONE | _PAGE_ACCESSED| \
-				 _PAGE_FILE	| _PAGE_SZ1	| \
-				 _PAGE_HW_SHARED)
-#elif defined(CONFIG_X2TLB)
-/* Get rid of the legacy PR/SZ bits when using extended mode */
-#define _PAGE_CLEAR_FLAGS	(_PAGE_PROTNONE | _PAGE_ACCESSED | \
-				 _PAGE_FILE | _PAGE_PR_MASK | _PAGE_SZ_MASK)
-#else
-#define _PAGE_CLEAR_FLAGS	(_PAGE_PROTNONE | _PAGE_ACCESSED | _PAGE_FILE)
-#endif
-
-#define _PAGE_FLAGS_HARDWARE_MASK	(PHYS_ADDR_MASK & ~(_PAGE_CLEAR_FLAGS))
-
-/* Hardware flags, page size encoding */
-#if defined(CONFIG_X2TLB)
-# if defined(CONFIG_PAGE_SIZE_4KB)
-#  define _PAGE_FLAGS_HARD	_PAGE_EXT(_PAGE_EXT_ESZ0)
-# elif defined(CONFIG_PAGE_SIZE_8KB)
-#  define _PAGE_FLAGS_HARD	_PAGE_EXT(_PAGE_EXT_ESZ1)
-# elif defined(CONFIG_PAGE_SIZE_64KB)
-#  define _PAGE_FLAGS_HARD	_PAGE_EXT(_PAGE_EXT_ESZ2)
-# endif
-#else
-# if defined(CONFIG_PAGE_SIZE_4KB)
-#  define _PAGE_FLAGS_HARD	_PAGE_SZ0
-# elif defined(CONFIG_PAGE_SIZE_64KB)
-#  define _PAGE_FLAGS_HARD	_PAGE_SZ1
-# endif
-#endif
-
-#if defined(CONFIG_X2TLB)
-# if defined(CONFIG_HUGETLB_PAGE_SIZE_64K)
-#  define _PAGE_SZHUGE	(_PAGE_EXT_ESZ2)
-# elif defined(CONFIG_HUGETLB_PAGE_SIZE_256K)
-#  define _PAGE_SZHUGE	(_PAGE_EXT_ESZ0 | _PAGE_EXT_ESZ2)
-# elif defined(CONFIG_HUGETLB_PAGE_SIZE_1MB)
-#  define _PAGE_SZHUGE	(_PAGE_EXT_ESZ0 | _PAGE_EXT_ESZ1 | _PAGE_EXT_ESZ2)
-# elif defined(CONFIG_HUGETLB_PAGE_SIZE_4MB)
-#  define _PAGE_SZHUGE	(_PAGE_EXT_ESZ3)
-# elif defined(CONFIG_HUGETLB_PAGE_SIZE_64MB)
-#  define _PAGE_SZHUGE	(_PAGE_EXT_ESZ2 | _PAGE_EXT_ESZ3)
-# endif
-#else
-# if defined(CONFIG_HUGETLB_PAGE_SIZE_64K)
-#  define _PAGE_SZHUGE	(_PAGE_SZ1)
-# elif defined(CONFIG_HUGETLB_PAGE_SIZE_1MB)
-#  define _PAGE_SZHUGE	(_PAGE_SZ0 | _PAGE_SZ1)
-# endif
-#endif
-
-/*
- * Stub out _PAGE_SZHUGE if we don't have a good definition for it,
- * to make pte_mkhuge() happy.
- */
-#ifndef _PAGE_SZHUGE
-# define _PAGE_SZHUGE	(_PAGE_FLAGS_HARD)
-#endif
-
-#define _PAGE_CHG_MASK \
-	(PTE_MASK | _PAGE_ACCESSED | _PAGE_CACHABLE | _PAGE_DIRTY)
-
-#ifndef __ASSEMBLY__
-
-#if defined(CONFIG_X2TLB) /* SH-X2 TLB */
-#define PAGE_NONE	__pgprot(_PAGE_PROTNONE | _PAGE_CACHABLE | \
-				 _PAGE_ACCESSED | _PAGE_FLAGS_HARD)
-
-#define PAGE_SHARED	__pgprot(_PAGE_PRESENT | _PAGE_ACCESSED | \
-				 _PAGE_CACHABLE | _PAGE_FLAGS_HARD | \
-				 _PAGE_EXT(_PAGE_EXT_KERN_READ  | \
-					   _PAGE_EXT_KERN_WRITE | \
-					   _PAGE_EXT_USER_READ  | \
-					   _PAGE_EXT_USER_WRITE))
-
-#define PAGE_EXECREAD	__pgprot(_PAGE_PRESENT | _PAGE_ACCESSED | \
-				 _PAGE_CACHABLE | _PAGE_FLAGS_HARD | \
-				 _PAGE_EXT(_PAGE_EXT_KERN_EXEC | \
-					   _PAGE_EXT_KERN_READ | \
-					   _PAGE_EXT_USER_EXEC | \
-					   _PAGE_EXT_USER_READ))
-
-#define PAGE_COPY	PAGE_EXECREAD
-
-#define PAGE_READONLY	__pgprot(_PAGE_PRESENT | _PAGE_ACCESSED | \
-				 _PAGE_CACHABLE | _PAGE_FLAGS_HARD | \
-				 _PAGE_EXT(_PAGE_EXT_KERN_READ | \
-					   _PAGE_EXT_USER_READ))
-
-#define PAGE_WRITEONLY	__pgprot(_PAGE_PRESENT | _PAGE_ACCESSED | \
-				 _PAGE_CACHABLE | _PAGE_FLAGS_HARD | \
-				 _PAGE_EXT(_PAGE_EXT_KERN_WRITE | \
-					   _PAGE_EXT_USER_WRITE))
-
-#define PAGE_RWX	__pgprot(_PAGE_PRESENT | _PAGE_ACCESSED | \
-				 _PAGE_CACHABLE | _PAGE_FLAGS_HARD | \
-				 _PAGE_EXT(_PAGE_EXT_KERN_WRITE | \
-					   _PAGE_EXT_KERN_READ  | \
-					   _PAGE_EXT_KERN_EXEC  | \
-					   _PAGE_EXT_USER_WRITE | \
-					   _PAGE_EXT_USER_READ  | \
-					   _PAGE_EXT_USER_EXEC))
-
-#define PAGE_KERNEL	__pgprot(_PAGE_PRESENT | _PAGE_CACHABLE | \
-				 _PAGE_DIRTY | _PAGE_ACCESSED | \
-				 _PAGE_HW_SHARED | _PAGE_FLAGS_HARD | \
-				 _PAGE_EXT(_PAGE_EXT_KERN_READ | \
-					   _PAGE_EXT_KERN_WRITE | \
-					   _PAGE_EXT_KERN_EXEC))
-
-#define PAGE_KERNEL_NOCACHE \
-			__pgprot(_PAGE_PRESENT | _PAGE_DIRTY | \
-				 _PAGE_ACCESSED | _PAGE_HW_SHARED | \
-				 _PAGE_FLAGS_HARD | \
-				 _PAGE_EXT(_PAGE_EXT_KERN_READ | \
-					   _PAGE_EXT_KERN_WRITE | \
-					   _PAGE_EXT_KERN_EXEC))
-
-#define PAGE_KERNEL_RO	__pgprot(_PAGE_PRESENT | _PAGE_CACHABLE | \
-				 _PAGE_DIRTY | _PAGE_ACCESSED | \
-				 _PAGE_HW_SHARED | _PAGE_FLAGS_HARD | \
-				 _PAGE_EXT(_PAGE_EXT_KERN_READ | \
-					   _PAGE_EXT_KERN_EXEC))
-
-#define PAGE_KERNEL_PCC(slot, type) \
-			__pgprot(_PAGE_PRESENT | _PAGE_DIRTY | \
-				 _PAGE_ACCESSED | _PAGE_FLAGS_HARD | \
-				 _PAGE_EXT(_PAGE_EXT_KERN_READ | \
-					   _PAGE_EXT_KERN_WRITE | \
-					   _PAGE_EXT_KERN_EXEC) \
-				 (slot ? _PAGE_PCC_AREA5 : _PAGE_PCC_AREA6) | \
-				 (type))
-
-#elif defined(CONFIG_MMU) /* SH-X TLB */
-#define PAGE_NONE	__pgprot(_PAGE_PROTNONE | _PAGE_CACHABLE | \
-				 _PAGE_ACCESSED | _PAGE_FLAGS_HARD)
-
-#define PAGE_SHARED	__pgprot(_PAGE_PRESENT | _PAGE_RW | _PAGE_USER | \
-				 _PAGE_CACHABLE | _PAGE_ACCESSED | \
-				 _PAGE_FLAGS_HARD)
-
-#define PAGE_COPY	__pgprot(_PAGE_PRESENT | _PAGE_USER | _PAGE_CACHABLE | \
-				 _PAGE_ACCESSED | _PAGE_FLAGS_HARD)
-
-#define PAGE_READONLY	__pgprot(_PAGE_PRESENT | _PAGE_USER | _PAGE_CACHABLE | \
-				 _PAGE_ACCESSED | _PAGE_FLAGS_HARD)
-
-#define PAGE_EXECREAD	PAGE_READONLY
-#define PAGE_RWX	PAGE_SHARED
-#define PAGE_WRITEONLY	PAGE_SHARED
-
-#define PAGE_KERNEL	__pgprot(_PAGE_PRESENT | _PAGE_RW | _PAGE_CACHABLE | \
-				 _PAGE_DIRTY | _PAGE_ACCESSED | \
-				 _PAGE_HW_SHARED | _PAGE_FLAGS_HARD)
-
-#define PAGE_KERNEL_NOCACHE \
-			__pgprot(_PAGE_PRESENT | _PAGE_RW | _PAGE_DIRTY | \
-				 _PAGE_ACCESSED | _PAGE_HW_SHARED | \
-				 _PAGE_FLAGS_HARD)
-
-#define PAGE_KERNEL_RO	__pgprot(_PAGE_PRESENT | _PAGE_CACHABLE | \
-				 _PAGE_DIRTY | _PAGE_ACCESSED | \
-				 _PAGE_HW_SHARED | _PAGE_FLAGS_HARD)
-
-#define PAGE_KERNEL_PCC(slot, type) \
-			__pgprot(_PAGE_PRESENT | _PAGE_RW | _PAGE_DIRTY | \
-				 _PAGE_ACCESSED | _PAGE_FLAGS_HARD | \
-				 (slot ? _PAGE_PCC_AREA5 : _PAGE_PCC_AREA6) | \
-				 (type))
-#else /* no mmu */
-#define PAGE_NONE		__pgprot(0)
-#define PAGE_SHARED		__pgprot(0)
-#define PAGE_COPY		__pgprot(0)
-#define PAGE_EXECREAD		__pgprot(0)
-#define PAGE_RWX		__pgprot(0)
-#define PAGE_READONLY		__pgprot(0)
-#define PAGE_WRITEONLY		__pgprot(0)
-#define PAGE_KERNEL		__pgprot(0)
-#define PAGE_KERNEL_NOCACHE	__pgprot(0)
-#define PAGE_KERNEL_RO		__pgprot(0)
-
-#define PAGE_KERNEL_PCC(slot, type) \
-				__pgprot(0)
-#endif
-
-#endif /* __ASSEMBLY__ */
-
-#ifndef __ASSEMBLY__
-
-/*
- * Certain architectures need to do special things when PTEs
- * within a page table are directly modified.  Thus, the following
- * hook is made available.
- */
-#ifdef CONFIG_X2TLB
-static inline void set_pte(pte_t *ptep, pte_t pte)
-{
-	ptep->pte_high = pte.pte_high;
-	smp_wmb();
-	ptep->pte_low = pte.pte_low;
-}
-#else
-#define set_pte(pteptr, pteval) (*(pteptr) = pteval)
-#endif
-
-#define set_pte_at(mm,addr,ptep,pteval) set_pte(ptep,pteval)
-
-/*
- * (pmds are folded into pgds so this doesn't get actually called,
- * but the define is needed for a generic inline function.)
- */
-#define set_pmd(pmdptr, pmdval) (*(pmdptr) = pmdval)
-
-#define pfn_pte(pfn, prot) \
-	__pte(((unsigned long long)(pfn) << PAGE_SHIFT) | pgprot_val(prot))
-#define pfn_pmd(pfn, prot) \
-	__pmd(((unsigned long long)(pfn) << PAGE_SHIFT) | pgprot_val(prot))
-
-#define pte_none(x)		(!pte_val(x))
-#define pte_present(x)		((x).pte_low & (_PAGE_PRESENT | _PAGE_PROTNONE))
-
-#define pte_clear(mm,addr,xp) do { set_pte_at(mm, addr, xp, __pte(0)); } while (0)
-
-#define pmd_none(x)	(!pmd_val(x))
-#define pmd_present(x)	(pmd_val(x))
-#define pmd_clear(xp)	do { set_pmd(xp, __pmd(0)); } while (0)
-#define	pmd_bad(x)	(pmd_val(x) & ~PAGE_MASK)
-
-#define pages_to_mb(x)	((x) >> (20-PAGE_SHIFT))
-#define pte_page(x)	pfn_to_page(pte_pfn(x))
-
-/*
- * The following only work if pte_present() is true.
- * Undefined behaviour if not..
- */
-#define pte_not_present(pte)	(!((pte).pte_low & _PAGE_PRESENT))
-#define pte_dirty(pte)		((pte).pte_low & _PAGE_DIRTY)
-#define pte_young(pte)		((pte).pte_low & _PAGE_ACCESSED)
-#define pte_file(pte)		((pte).pte_low & _PAGE_FILE)
-#define pte_special(pte)	(0)
-
-#ifdef CONFIG_X2TLB
-#define pte_write(pte)		((pte).pte_high & _PAGE_EXT_USER_WRITE)
-#else
-#define pte_write(pte)		((pte).pte_low & _PAGE_RW)
-#endif
-
-#define PTE_BIT_FUNC(h,fn,op) \
-static inline pte_t pte_##fn(pte_t pte) { pte.pte_##h op; return pte; }
-
-#ifdef CONFIG_X2TLB
-/*
- * We cheat a bit in the SH-X2 TLB case. As the permission bits are
- * individually toggled (and user permissions are entirely decoupled from
- * kernel permissions), we attempt to couple them a bit more sanely here.
- */
-PTE_BIT_FUNC(high, wrprotect, &= ~_PAGE_EXT_USER_WRITE);
-PTE_BIT_FUNC(high, mkwrite, |= _PAGE_EXT_USER_WRITE | _PAGE_EXT_KERN_WRITE);
-PTE_BIT_FUNC(high, mkhuge, |= _PAGE_SZHUGE);
-#else
-PTE_BIT_FUNC(low, wrprotect, &= ~_PAGE_RW);
-PTE_BIT_FUNC(low, mkwrite, |= _PAGE_RW);
-PTE_BIT_FUNC(low, mkhuge, |= _PAGE_SZHUGE);
-#endif
-
-PTE_BIT_FUNC(low, mkclean, &= ~_PAGE_DIRTY);
-PTE_BIT_FUNC(low, mkdirty, |= _PAGE_DIRTY);
-PTE_BIT_FUNC(low, mkold, &= ~_PAGE_ACCESSED);
-PTE_BIT_FUNC(low, mkyoung, |= _PAGE_ACCESSED);
-
-static inline pte_t pte_mkspecial(pte_t pte) { return pte; }
-
-/*
- * Macro and implementation to make a page protection as uncachable.
- */
-#define pgprot_writecombine(prot) \
-	__pgprot(pgprot_val(prot) & ~_PAGE_CACHABLE)
-
-#define pgprot_noncached	 pgprot_writecombine
-
-/*
- * Conversion functions: convert a page and protection to a page entry,
- * and a page entry and page directory to the page they refer to.
- *
- * extern pte_t mk_pte(struct page *page, pgprot_t pgprot)
- */
-#define mk_pte(page, pgprot)	pfn_pte(page_to_pfn(page), (pgprot))
-
-static inline pte_t pte_modify(pte_t pte, pgprot_t newprot)
-{
-	pte.pte_low &= _PAGE_CHG_MASK;
-	pte.pte_low |= pgprot_val(newprot);
-
-#ifdef CONFIG_X2TLB
-	pte.pte_high |= pgprot_val(newprot) >> 32;
-#endif
-
-	return pte;
-}
-
-#define pmd_page_vaddr(pmd)	((unsigned long)pmd_val(pmd))
-#define pmd_page(pmd)		(virt_to_page(pmd_val(pmd)))
-
-/* to find an entry in a page-table-directory. */
-#define pgd_index(address)	(((address) >> PGDIR_SHIFT) & (PTRS_PER_PGD-1))
-#define pgd_offset(mm, address)	((mm)->pgd+pgd_index(address))
-
-/* to find an entry in a kernel page-table-directory */
-#define pgd_offset_k(address)	pgd_offset(&init_mm, address)
-
-/* Find an entry in the third-level page table.. */
-#define pte_index(address)	((address >> PAGE_SHIFT) & (PTRS_PER_PTE - 1))
-#define pte_offset_kernel(dir, address) \
-	((pte_t *) pmd_page_vaddr(*(dir)) + pte_index(address))
-#define pte_offset_map(dir, address)		pte_offset_kernel(dir, address)
-#define pte_offset_map_nested(dir, address)	pte_offset_kernel(dir, address)
-
-#define pte_unmap(pte)		do { } while (0)
-#define pte_unmap_nested(pte)	do { } while (0)
-
-#ifdef CONFIG_X2TLB
-#define pte_ERROR(e) \
-	printk("%s:%d: bad pte %p(%08lx%08lx).\n", __FILE__, __LINE__, \
-	       &(e), (e).pte_high, (e).pte_low)
-#define pgd_ERROR(e) \
-	printk("%s:%d: bad pgd %016llx.\n", __FILE__, __LINE__, pgd_val(e))
-#else
-#define pte_ERROR(e) \
-	printk("%s:%d: bad pte %08lx.\n", __FILE__, __LINE__, pte_val(e))
-#define pgd_ERROR(e) \
-	printk("%s:%d: bad pgd %08lx.\n", __FILE__, __LINE__, pgd_val(e))
-#endif
-
-/*
- * Encode and de-code a swap entry
- *
- * Constraints:
- *	_PAGE_FILE at bit 0
- *	_PAGE_PRESENT at bit 8
- *	_PAGE_PROTNONE at bit 9
- *
- * For the normal case, we encode the swap type into bits 0:7 and the
- * swap offset into bits 10:30. For the 64-bit PTE case, we keep the
- * preserved bits in the low 32-bits and use the upper 32 as the swap
- * offset (along with a 5-bit type), following the same approach as x86
- * PAE. This keeps the logic quite simple, and allows for a full 32
- * PTE_FILE_MAX_BITS, as opposed to the 29-bits we're constrained with
- * in the pte_low case.
- *
- * As is evident by the Alpha code, if we ever get a 64-bit unsigned
- * long (swp_entry_t) to match up with the 64-bit PTEs, this all becomes
- * much cleaner..
- *
- * NOTE: We should set ZEROs at the position of _PAGE_PRESENT
- *       and _PAGE_PROTNONE bits
- */
-#ifdef CONFIG_X2TLB
-#define __swp_type(x)			((x).val & 0x1f)
-#define __swp_offset(x)			((x).val >> 5)
-#define __swp_entry(type, offset)	((swp_entry_t){ (type) | (offset) << 5})
-#define __pte_to_swp_entry(pte)		((swp_entry_t){ (pte).pte_high })
-#define __swp_entry_to_pte(x)		((pte_t){ 0, (x).val })
-
-/*
- * Encode and decode a nonlinear file mapping entry
- */
-#define pte_to_pgoff(pte)		((pte).pte_high)
-#define pgoff_to_pte(off)		((pte_t) { _PAGE_FILE, (off) })
-
-#define PTE_FILE_MAX_BITS		32
-#else
-#define __swp_type(x)			((x).val & 0xff)
-#define __swp_offset(x)			((x).val >> 10)
-#define __swp_entry(type, offset)	((swp_entry_t){(type) | (offset) <<10})
-
-#define __pte_to_swp_entry(pte)		((swp_entry_t) { pte_val(pte) >> 1 })
-#define __swp_entry_to_pte(x)		((pte_t) { (x).val << 1 })
-
-/*
- * Encode and decode a nonlinear file mapping entry
- */
-#define PTE_FILE_MAX_BITS	29
-#define pte_to_pgoff(pte)	(pte_val(pte) >> 1)
-#define pgoff_to_pte(off)	((pte_t) { ((off) << 1) | _PAGE_FILE })
-#endif
-
-#endif /* __ASSEMBLY__ */
-#endif /* __ASM_SH_PGTABLE_32_H */
diff --git a/include/asm-sh/processor.h b/include/asm-sh/processor.h
deleted file mode 100644
index b7c7ce80f03e..000000000000
--- a/include/asm-sh/processor.h
+++ /dev/null
@@ -1,65 +0,0 @@
-#ifndef __ASM_SH_PROCESSOR_H
-#define __ASM_SH_PROCESSOR_H
-
-#include <asm/cpu-features.h>
-
-#ifndef __ASSEMBLY__
-/*
- *  CPU type and hardware bug flags. Kept separately for each CPU.
- *
- *  Each one of these also needs a CONFIG_CPU_SUBTYPE_xxx entry
- *  in arch/sh/mm/Kconfig, as well as an entry in arch/sh/kernel/setup.c
- *  for parsing the subtype in get_cpu_subtype().
- */
-enum cpu_type {
-	/* SH-2 types */
-	CPU_SH7619,
-
-	/* SH-2A types */
-	CPU_SH7203, CPU_SH7206, CPU_SH7263, CPU_MXG,
-
-	/* SH-3 types */
-	CPU_SH7705, CPU_SH7706, CPU_SH7707,
-	CPU_SH7708, CPU_SH7708S, CPU_SH7708R,
-	CPU_SH7709, CPU_SH7709A, CPU_SH7710, CPU_SH7712,
-	CPU_SH7720, CPU_SH7721, CPU_SH7729,
-
-	/* SH-4 types */
-	CPU_SH7750, CPU_SH7750S, CPU_SH7750R, CPU_SH7751, CPU_SH7751R,
-	CPU_SH7760, CPU_SH4_202, CPU_SH4_501,
-
-	/* SH-4A types */
-	CPU_SH7763, CPU_SH7770, CPU_SH7780, CPU_SH7781, CPU_SH7785,
-	CPU_SH7723, CPU_SHX3,
-
-	/* SH4AL-DSP types */
-	CPU_SH7343, CPU_SH7722, CPU_SH7366,
-
-	/* SH-5 types */
-        CPU_SH5_101, CPU_SH5_103,
-
-	/* Unknown subtype */
-	CPU_SH_NONE
-};
-
-/* Forward decl */
-struct sh_cpuinfo;
-
-/* arch/sh/kernel/setup.c */
-const char *get_cpu_subtype(struct sh_cpuinfo *c);
-
-#ifdef CONFIG_VSYSCALL
-int vsyscall_init(void);
-#else
-#define vsyscall_init() do { } while (0)
-#endif
-
-#endif /* __ASSEMBLY__ */
-
-#ifdef CONFIG_SUPERH32
-# include "processor_32.h"
-#else
-# include "processor_64.h"
-#endif
-
-#endif /* __ASM_SH_PROCESSOR_H */
diff --git a/include/asm-sh/processor_32.h b/include/asm-sh/processor_32.h
deleted file mode 100644
index c09305d6a9d9..000000000000
--- a/include/asm-sh/processor_32.h
+++ /dev/null
@@ -1,219 +0,0 @@
-/*
- * include/asm-sh/processor.h
- *
- * Copyright (C) 1999, 2000  Niibe Yutaka
- * Copyright (C) 2002, 2003  Paul Mundt
- */
-
-#ifndef __ASM_SH_PROCESSOR_32_H
-#define __ASM_SH_PROCESSOR_32_H
-#ifdef __KERNEL__
-
-#include <linux/compiler.h>
-#include <asm/page.h>
-#include <asm/types.h>
-#include <asm/cache.h>
-#include <asm/ptrace.h>
-
-/*
- * Default implementation of macro that returns current
- * instruction pointer ("program counter").
- */
-#define current_text_addr() ({ void *pc; __asm__("mova	1f, %0\n1:":"=z" (pc)); pc; })
-
-/* Core Processor Version Register */
-#define CCN_PVR		0xff000030
-#define CCN_CVR		0xff000040
-#define CCN_PRR		0xff000044
-
-struct sh_cpuinfo {
-	unsigned int type;
-	unsigned long loops_per_jiffy;
-	unsigned long asid_cache;
-
-	struct cache_info icache;	/* Primary I-cache */
-	struct cache_info dcache;	/* Primary D-cache */
-	struct cache_info scache;	/* Secondary cache */
-
-	unsigned long flags;
-} __attribute__ ((aligned(L1_CACHE_BYTES)));
-
-extern struct sh_cpuinfo cpu_data[];
-#define boot_cpu_data cpu_data[0]
-#define current_cpu_data cpu_data[smp_processor_id()]
-#define raw_current_cpu_data cpu_data[raw_smp_processor_id()]
-
-/*
- * User space process size: 2GB.
- *
- * Since SH7709 and SH7750 have "area 7", we can't use 0x7c000000--0x7fffffff
- */
-#define TASK_SIZE	0x7c000000UL
-
-#define STACK_TOP	TASK_SIZE
-#define STACK_TOP_MAX	STACK_TOP
-
-/* This decides where the kernel will search for a free chunk of vm
- * space during mmap's.
- */
-#define TASK_UNMAPPED_BASE	(TASK_SIZE / 3)
-
-/*
- * Bit of SR register
- *
- * FD-bit:
- *     When it's set, it means the processor doesn't have right to use FPU,
- *     and it results exception when the floating operation is executed.
- *
- * IMASK-bit:
- *     Interrupt level mask
- */
-#define SR_DSP		0x00001000
-#define SR_IMASK	0x000000f0
-#define SR_FD		0x00008000
-
-/*
- * FPU structure and data
- */
-
-struct sh_fpu_hard_struct {
-	unsigned long fp_regs[16];
-	unsigned long xfp_regs[16];
-	unsigned long fpscr;
-	unsigned long fpul;
-
-	long status; /* software status information */
-};
-
-/* Dummy fpu emulator  */
-struct sh_fpu_soft_struct {
-	unsigned long fp_regs[16];
-	unsigned long xfp_regs[16];
-	unsigned long fpscr;
-	unsigned long fpul;
-
-	unsigned char lookahead;
-	unsigned long entry_pc;
-};
-
-union sh_fpu_union {
-	struct sh_fpu_hard_struct hard;
-	struct sh_fpu_soft_struct soft;
-};
-
-struct thread_struct {
-	/* Saved registers when thread is descheduled */
-	unsigned long sp;
-	unsigned long pc;
-
-	/* Hardware debugging registers */
-	unsigned long ubc_pc;
-
-	/* floating point info */
-	union sh_fpu_union fpu;
-};
-
-typedef struct {
-	unsigned long seg;
-} mm_segment_t;
-
-/* Count of active tasks with UBC settings */
-extern int ubc_usercnt;
-
-#define INIT_THREAD  {						\
-	.sp = sizeof(init_stack) + (long) &init_stack,		\
-}
-
-/*
- * Do necessary setup to start up a newly executed thread.
- */
-#define start_thread(regs, new_pc, new_sp)	 \
-	set_fs(USER_DS);			 \
-	regs->pr = 0;				 \
-	regs->sr = SR_FD;	/* User mode. */ \
-	regs->pc = new_pc;			 \
-	regs->regs[15] = new_sp
-
-/* Forward declaration, a strange C thing */
-struct task_struct;
-struct mm_struct;
-
-/* Free all resources held by a thread. */
-extern void release_thread(struct task_struct *);
-
-/* Prepare to copy thread state - unlazy all lazy status */
-#define prepare_to_copy(tsk)	do { } while (0)
-
-/*
- * create a kernel thread without removing it from tasklists
- */
-extern int kernel_thread(int (*fn)(void *), void * arg, unsigned long flags);
-
-/* Copy and release all segment info associated with a VM */
-#define copy_segments(p, mm)	do { } while(0)
-#define release_segments(mm)	do { } while(0)
-
-/*
- * FPU lazy state save handling.
- */
-
-static __inline__ void disable_fpu(void)
-{
-	unsigned long __dummy;
-
-	/* Set FD flag in SR */
-	__asm__ __volatile__("stc	sr, %0\n\t"
-			     "or	%1, %0\n\t"
-			     "ldc	%0, sr"
-			     : "=&r" (__dummy)
-			     : "r" (SR_FD));
-}
-
-static __inline__ void enable_fpu(void)
-{
-	unsigned long __dummy;
-
-	/* Clear out FD flag in SR */
-	__asm__ __volatile__("stc	sr, %0\n\t"
-			     "and	%1, %0\n\t"
-			     "ldc	%0, sr"
-			     : "=&r" (__dummy)
-			     : "r" (~SR_FD));
-}
-
-/* Double presision, NANS as NANS, rounding to nearest, no exceptions */
-#define FPSCR_INIT  0x00080000
-
-#define	FPSCR_CAUSE_MASK	0x0001f000	/* Cause bits */
-#define	FPSCR_FLAG_MASK		0x0000007c	/* Flag bits */
-
-/*
- * Return saved PC of a blocked thread.
- */
-#define thread_saved_pc(tsk)	(tsk->thread.pc)
-
-void show_trace(struct task_struct *tsk, unsigned long *sp,
-		struct pt_regs *regs);
-extern unsigned long get_wchan(struct task_struct *p);
-
-#define KSTK_EIP(tsk)  (task_pt_regs(tsk)->pc)
-#define KSTK_ESP(tsk)  (task_pt_regs(tsk)->regs[15])
-
-#define cpu_sleep()	__asm__ __volatile__ ("sleep" : : : "memory")
-#define cpu_relax()	barrier()
-
-#if defined(CONFIG_CPU_SH2A) || defined(CONFIG_CPU_SH3) || \
-    defined(CONFIG_CPU_SH4)
-#define PREFETCH_STRIDE		L1_CACHE_BYTES
-#define ARCH_HAS_PREFETCH
-#define ARCH_HAS_PREFETCHW
-static inline void prefetch(void *x)
-{
-	__asm__ __volatile__ ("pref @%0\n\t" : : "r" (x) : "memory");
-}
-
-#define prefetchw(x)	prefetch(x)
-#endif
-
-#endif /* __KERNEL__ */
-#endif /* __ASM_SH_PROCESSOR_32_H */
diff --git a/include/asm-sh/processor_64.h b/include/asm-sh/processor_64.h
deleted file mode 100644
index 88a2edf8fa5d..000000000000
--- a/include/asm-sh/processor_64.h
+++ /dev/null
@@ -1,279 +0,0 @@
-#ifndef __ASM_SH_PROCESSOR_64_H
-#define __ASM_SH_PROCESSOR_64_H
-
-/*
- * include/asm-sh/processor_64.h
- *
- * Copyright (C) 2000, 2001  Paolo Alberelli
- * Copyright (C) 2003  Paul Mundt
- * Copyright (C) 2004  Richard Curnow
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-#ifndef __ASSEMBLY__
-
-#include <linux/compiler.h>
-#include <asm/page.h>
-#include <asm/types.h>
-#include <asm/cache.h>
-#include <asm/ptrace.h>
-#include <asm/cpu/registers.h>
-
-/*
- * Default implementation of macro that returns current
- * instruction pointer ("program counter").
- */
-#define current_text_addr() ({ \
-void *pc; \
-unsigned long long __dummy = 0; \
-__asm__("gettr	tr0, %1\n\t" \
-	"pta	4, tr0\n\t" \
-	"gettr	tr0, %0\n\t" \
-	"ptabs	%1, tr0\n\t"	\
-	:"=r" (pc), "=r" (__dummy) \
-	: "1" (__dummy)); \
-pc; })
-
-/*
- * TLB information structure
- *
- * Defined for both I and D tlb, per-processor.
- */
-struct tlb_info {
-	unsigned long long next;
-	unsigned long long first;
-	unsigned long long last;
-
-	unsigned int entries;
-	unsigned int step;
-
-	unsigned long flags;
-};
-
-struct sh_cpuinfo {
-	enum cpu_type type;
-	unsigned long loops_per_jiffy;
-	unsigned long asid_cache;
-
-	unsigned int cpu_clock, master_clock, bus_clock, module_clock;
-
-	/* Cache info */
-	struct cache_info icache;
-	struct cache_info dcache;
-	struct cache_info scache;
-
-	/* TLB info */
-	struct tlb_info itlb;
-	struct tlb_info dtlb;
-
-	unsigned long flags;
-};
-
-extern struct sh_cpuinfo cpu_data[];
-#define boot_cpu_data cpu_data[0]
-#define current_cpu_data cpu_data[smp_processor_id()]
-#define raw_current_cpu_data cpu_data[raw_smp_processor_id()]
-
-#endif
-
-/*
- * User space process size: 2GB - 4k.
- */
-#define TASK_SIZE	0x7ffff000UL
-
-#define STACK_TOP	TASK_SIZE
-#define STACK_TOP_MAX	STACK_TOP
-
-/* This decides where the kernel will search for a free chunk of vm
- * space during mmap's.
- */
-#define TASK_UNMAPPED_BASE	(TASK_SIZE / 3)
-
-/*
- * Bit of SR register
- *
- * FD-bit:
- *     When it's set, it means the processor doesn't have right to use FPU,
- *     and it results exception when the floating operation is executed.
- *
- * IMASK-bit:
- *     Interrupt level mask
- *
- * STEP-bit:
- *     Single step bit
- *
- */
-#if defined(CONFIG_SH64_SR_WATCH)
-#define SR_MMU   0x84000000
-#else
-#define SR_MMU   0x80000000
-#endif
-
-#define SR_IMASK 0x000000f0
-#define SR_FD    0x00008000
-#define SR_SSTEP 0x08000000
-
-#ifndef __ASSEMBLY__
-
-/*
- * FPU structure and data : require 8-byte alignment as we need to access it
-   with fld.p, fst.p
- */
-
-struct sh_fpu_hard_struct {
-	unsigned long fp_regs[64];
-	unsigned int fpscr;
-	/* long status; * software status information */
-};
-
-#if 0
-/* Dummy fpu emulator  */
-struct sh_fpu_soft_struct {
-	unsigned long long fp_regs[32];
-	unsigned int fpscr;
-	unsigned char lookahead;
-	unsigned long entry_pc;
-};
-#endif
-
-union sh_fpu_union {
-	struct sh_fpu_hard_struct hard;
-	/* 'hard' itself only produces 32 bit alignment, yet we need
-	   to access it using 64 bit load/store as well. */
-	unsigned long long alignment_dummy;
-};
-
-struct thread_struct {
-	unsigned long sp;
-	unsigned long pc;
-	/* This stores the address of the pt_regs built during a context
-	   switch, or of the register save area built for a kernel mode
-	   exception.  It is used for backtracing the stack of a sleeping task
-	   or one that traps in kernel mode. */
-        struct pt_regs *kregs;
-	/* This stores the address of the pt_regs constructed on entry from
-	   user mode.  It is a fixed value over the lifetime of a process, or
-	   NULL for a kernel thread. */
-	struct pt_regs *uregs;
-
-	unsigned long trap_no, error_code;
-	unsigned long address;
-	/* Hardware debugging registers may come here */
-
-	/* floating point info */
-	union sh_fpu_union fpu;
-};
-
-typedef struct {
-	unsigned long seg;
-} mm_segment_t;
-
-#define INIT_MMAP \
-{ &init_mm, 0, 0, NULL, PAGE_SHARED, VM_READ | VM_WRITE | VM_EXEC, 1, NULL, NULL }
-
-extern  struct pt_regs fake_swapper_regs;
-
-#define INIT_THREAD  {				\
-	.sp		= sizeof(init_stack) +	\
-			  (long) &init_stack,	\
-	.pc		= 0,			\
-        .kregs		= &fake_swapper_regs,	\
-	.uregs	        = NULL,			\
-	.trap_no	= 0,			\
-	.error_code	= 0,			\
-	.address	= 0,			\
-	.fpu		= { { { 0, } }, }	\
-}
-
-/*
- * Do necessary setup to start up a newly executed thread.
- */
-#define SR_USER (SR_MMU | SR_FD)
-
-#define start_thread(regs, new_pc, new_sp)			\
-	set_fs(USER_DS);					\
-	regs->sr = SR_USER;	/* User mode. */		\
-	regs->pc = new_pc - 4;	/* Compensate syscall exit */	\
-	regs->pc |= 1;		/* Set SHmedia ! */		\
-	regs->regs[18] = 0;					\
-	regs->regs[15] = new_sp
-
-/* Forward declaration, a strange C thing */
-struct task_struct;
-struct mm_struct;
-
-/* Free all resources held by a thread. */
-extern void release_thread(struct task_struct *);
-/*
- * create a kernel thread without removing it from tasklists
- */
-extern int kernel_thread(int (*fn)(void *), void * arg, unsigned long flags);
-
-
-/* Copy and release all segment info associated with a VM */
-#define copy_segments(p, mm)	do { } while (0)
-#define release_segments(mm)	do { } while (0)
-#define forget_segments()	do { } while (0)
-#define prepare_to_copy(tsk)	do { } while (0)
-/*
- * FPU lazy state save handling.
- */
-
-static inline void disable_fpu(void)
-{
-	unsigned long long __dummy;
-
-	/* Set FD flag in SR */
-	__asm__ __volatile__("getcon	" __SR ", %0\n\t"
-			     "or	%0, %1, %0\n\t"
-			     "putcon	%0, " __SR "\n\t"
-			     : "=&r" (__dummy)
-			     : "r" (SR_FD));
-}
-
-static inline void enable_fpu(void)
-{
-	unsigned long long __dummy;
-
-	/* Clear out FD flag in SR */
-	__asm__ __volatile__("getcon	" __SR ", %0\n\t"
-			     "and	%0, %1, %0\n\t"
-			     "putcon	%0, " __SR "\n\t"
-			     : "=&r" (__dummy)
-			     : "r" (~SR_FD));
-}
-
-/* Round to nearest, no exceptions on inexact, overflow, underflow,
-   zero-divide, invalid.  Configure option for whether to flush denorms to
-   zero, or except if a denorm is encountered.  */
-#if defined(CONFIG_SH64_FPU_DENORM_FLUSH)
-#define FPSCR_INIT  0x00040000
-#else
-#define FPSCR_INIT  0x00000000
-#endif
-
-#ifdef CONFIG_SH_FPU
-/* Initialise the FP state of a task */
-void fpinit(struct sh_fpu_hard_struct *fpregs);
-#else
-#define fpinit(fpregs)	do { } while (0)
-#endif
-
-extern struct task_struct *last_task_used_math;
-
-/*
- * Return saved PC of a blocked thread.
- */
-#define thread_saved_pc(tsk)	(tsk->thread.pc)
-
-extern unsigned long get_wchan(struct task_struct *p);
-
-#define KSTK_EIP(tsk)  ((tsk)->thread.pc)
-#define KSTK_ESP(tsk)  ((tsk)->thread.sp)
-
-#define cpu_relax()	barrier()
-
-#endif	/* __ASSEMBLY__ */
-#endif /* __ASM_SH_PROCESSOR_64_H */
diff --git a/include/asm-sh/ptrace.h b/include/asm-sh/ptrace.h
deleted file mode 100644
index 8d6c92b3e770..000000000000
--- a/include/asm-sh/ptrace.h
+++ /dev/null
@@ -1,125 +0,0 @@
-#ifndef __ASM_SH_PTRACE_H
-#define __ASM_SH_PTRACE_H
-
-/*
- * Copyright (C) 1999, 2000  Niibe Yutaka
- *
- */
-#if defined(__SH5__) || defined(CONFIG_SUPERH64)
-struct pt_regs {
-	unsigned long long pc;
-	unsigned long long sr;
-	unsigned long long syscall_nr;
-	unsigned long long regs[63];
-	unsigned long long tregs[8];
-	unsigned long long pad[2];
-};
-#else
-/*
- * GCC defines register number like this:
- * -----------------------------
- *	 0 - 15 are integer registers
- *	17 - 22 are control/special registers
- *	24 - 39 fp registers
- *	40 - 47 xd registers
- *	48 -    fpscr register
- * -----------------------------
- *
- * We follows above, except:
- *	16 --- program counter (PC)
- *	22 --- syscall #
- *	23 --- floating point communication register
- */
-#define REG_REG0	 0
-#define REG_REG15	15
-
-#define REG_PC		16
-
-#define REG_PR		17
-#define REG_SR		18
-#define REG_GBR		19
-#define REG_MACH	20
-#define REG_MACL	21
-
-#define REG_SYSCALL	22
-
-#define REG_FPREG0	23
-#define REG_FPREG15	38
-#define REG_XFREG0	39
-#define REG_XFREG15	54
-
-#define REG_FPSCR	55
-#define REG_FPUL	56
-
-/*
- * This struct defines the way the registers are stored on the
- * kernel stack during a system call or other kernel entry.
- */
-struct pt_regs {
-	unsigned long regs[16];
-	unsigned long pc;
-	unsigned long pr;
-	unsigned long sr;
-	unsigned long gbr;
-	unsigned long mach;
-	unsigned long macl;
-	long tra;
-};
-
-/*
- * This struct defines the way the DSP registers are stored on the
- * kernel stack during a system call or other kernel entry.
- */
-struct pt_dspregs {
-	unsigned long	a1;
-	unsigned long	a0g;
-	unsigned long	a1g;
-	unsigned long	m0;
-	unsigned long	m1;
-	unsigned long	a0;
-	unsigned long	x0;
-	unsigned long	x1;
-	unsigned long	y0;
-	unsigned long	y1;
-	unsigned long	dsr;
-	unsigned long	rs;
-	unsigned long	re;
-	unsigned long	mod;
-};
-
-#define	PTRACE_GETDSPREGS	55
-#define	PTRACE_SETDSPREGS	56
-#endif
-
-#ifdef __KERNEL__
-#include <asm/addrspace.h>
-
-#define user_mode(regs)			(((regs)->sr & 0x40000000)==0)
-#define instruction_pointer(regs)	((unsigned long)(regs)->pc)
-
-extern void show_regs(struct pt_regs *);
-
-#ifdef CONFIG_SH_DSP
-#define task_pt_regs(task) \
-	((struct pt_regs *) (task_stack_page(task) + THREAD_SIZE \
-		 - sizeof(struct pt_dspregs) - sizeof(unsigned long)) - 1)
-#else
-#define task_pt_regs(task) \
-	((struct pt_regs *) (task_stack_page(task) + THREAD_SIZE \
-		 - sizeof(unsigned long)) - 1)
-#endif
-
-static inline unsigned long profile_pc(struct pt_regs *regs)
-{
-	unsigned long pc = instruction_pointer(regs);
-
-#ifdef P2SEG
-	if (pc >= P2SEG && pc < P3SEG)
-		pc -= 0x20000000;
-#endif
-
-	return pc;
-}
-#endif /* __KERNEL__ */
-
-#endif /* __ASM_SH_PTRACE_H */
diff --git a/include/asm-sh/rtc.h b/include/asm-sh/rtc.h
deleted file mode 100644
index ec45ba8e11d9..000000000000
--- a/include/asm-sh/rtc.h
+++ /dev/null
@@ -1,16 +0,0 @@
-#ifndef _ASM_RTC_H
-#define _ASM_RTC_H
-
-extern void (*board_time_init)(void);
-extern void (*rtc_sh_get_time)(struct timespec *);
-extern int (*rtc_sh_set_time)(const time_t);
-
-#define RTC_CAP_4_DIGIT_YEAR	(1 << 0)
-
-struct sh_rtc_platform_info {
-	unsigned long capabilities;
-};
-
-#include <asm/cpu/rtc.h>
-
-#endif /* _ASM_RTC_H */
diff --git a/include/asm-sh/se7343.h b/include/asm-sh/se7343.h
deleted file mode 100644
index e7914a54aa96..000000000000
--- a/include/asm-sh/se7343.h
+++ /dev/null
@@ -1,82 +0,0 @@
-#ifndef __ASM_SH_HITACHI_SE7343_H
-#define __ASM_SH_HITACHI_SE7343_H
-
-/*
- * include/asm-sh/se/se7343.h
- *
- * Copyright (C) 2003 Takashi Kusuda <kusuda-takashi@hitachi-ul.co.jp>
- *
- * SH-Mobile SolutionEngine 7343 support
- */
-
-/* Box specific addresses.  */
-
-/* Area 0 */
-#define PA_ROM		0x00000000	/* EPROM */
-#define PA_ROM_SIZE	0x00400000	/* EPROM size 4M byte(Actually 2MB) */
-#define PA_FROM		0x00400000	/* Flash ROM */
-#define PA_FROM_SIZE	0x00400000	/* Flash size 4M byte */
-#define PA_SRAM		0x00800000	/* SRAM */
-#define PA_FROM_SIZE	0x00400000	/* SRAM size 4M byte */
-/* Area 1 */
-#define PA_EXT1		0x04000000
-#define PA_EXT1_SIZE	0x04000000
-/* Area 2 */
-#define PA_EXT2		0x08000000
-#define PA_EXT2_SIZE	0x04000000
-/* Area 3 */
-#define PA_SDRAM	0x0c000000
-#define PA_SDRAM_SIZE	0x04000000
-/* Area 4 */
-#define PA_PCIC		0x10000000	/* MR-SHPC-01 PCMCIA */
-#define PA_MRSHPC       0xb03fffe0      /* MR-SHPC-01 PCMCIA controller */
-#define PA_MRSHPC_MW1   0xb0400000      /* MR-SHPC-01 memory window base */
-#define PA_MRSHPC_MW2   0xb0500000      /* MR-SHPC-01 attribute window base */
-#define PA_MRSHPC_IO    0xb0600000      /* MR-SHPC-01 I/O window base */
-#define MRSHPC_OPTION   (PA_MRSHPC + 6)
-#define MRSHPC_CSR      (PA_MRSHPC + 8)
-#define MRSHPC_ISR      (PA_MRSHPC + 10)
-#define MRSHPC_ICR      (PA_MRSHPC + 12)
-#define MRSHPC_CPWCR    (PA_MRSHPC + 14)
-#define MRSHPC_MW0CR1   (PA_MRSHPC + 16)
-#define MRSHPC_MW1CR1   (PA_MRSHPC + 18)
-#define MRSHPC_IOWCR1   (PA_MRSHPC + 20)
-#define MRSHPC_MW0CR2   (PA_MRSHPC + 22)
-#define MRSHPC_MW1CR2   (PA_MRSHPC + 24)
-#define MRSHPC_IOWCR2   (PA_MRSHPC + 26)
-#define MRSHPC_CDCR     (PA_MRSHPC + 28)
-#define MRSHPC_PCIC_INFO (PA_MRSHPC + 30)
-#define PA_LED		0xb0C00000	/* LED */
-#define LED_SHIFT       0
-#define PA_DIPSW	0xb0900000	/* Dip switch 31 */
-#define PA_CPLD_MODESET	0xb1400004	/* CPLD Mode set register */
-#define PA_CPLD_ST	0xb1400008	/* CPLD Interrupt status register */
-#define PA_CPLD_IMSK	0xb140000a	/* CPLD Interrupt mask register */
-/* Area 5 */
-#define PA_EXT5		0x14000000
-#define PA_EXT5_SIZE	0x04000000
-/* Area 6 */
-#define PA_LCD1		0xb8000000
-#define PA_LCD2		0xb8800000
-
-#define __IO_PREFIX	sh7343se
-#include <asm/io_generic.h>
-
-/* External Multiplexed interrupts */
-#define PC_IRQ0		OFFCHIP_IRQ_BASE
-#define PC_IRQ1		(PC_IRQ0 + 1)
-#define PC_IRQ2		(PC_IRQ1 + 1)
-#define PC_IRQ3		(PC_IRQ2 + 1)
-
-#define EXT_IRQ0	(PC_IRQ3 + 1)
-#define EXT_IRQ1	(EXT_IRQ0 + 1)
-#define EXT_IRQ2	(EXT_IRQ1 + 1)
-#define EXT_IRQ3	(EXT_IRQ2 + 1)
-
-#define USB_IRQ0	(EXT_IRQ3 + 1)
-#define USB_IRQ1	(USB_IRQ0 + 1)
-
-#define UART_IRQ0	(USB_IRQ1 + 1)
-#define UART_IRQ1	(UART_IRQ0 + 1)
-
-#endif  /* __ASM_SH_HITACHI_SE7343_H */
diff --git a/include/asm-sh/segment.h b/include/asm-sh/segment.h
deleted file mode 100644
index e417eab4c7d7..000000000000
--- a/include/asm-sh/segment.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef __ASM_SH_SEGMENT_H
-#define __ASM_SH_SEGMENT_H
-
-/* Only here because we have some old header files that expect it.. */
-
-#endif /* __ASM_SH_SEGMENT_H */
diff --git a/include/asm-sh/serial.h b/include/asm-sh/serial.h
deleted file mode 100644
index 21f6d330f189..000000000000
--- a/include/asm-sh/serial.h
+++ /dev/null
@@ -1,36 +0,0 @@
-/*
- * include/asm-sh/serial.h
- *
- * Configuration details for 8250, 16450, 16550, etc. serial ports
- */
-
-#ifndef _ASM_SERIAL_H
-#define _ASM_SERIAL_H
-
-#include <linux/kernel.h>
-
-/*
- * This assumes you have a 1.8432 MHz clock for your UART.
- *
- * It'd be nice if someone built a serial card with a 24.576 MHz
- * clock, since the 16550A is capable of handling a top speed of 1.5
- * megabits/second; but this requires the faster clock.
- */
-#define BASE_BAUD ( 1843200 / 16 )
-
-#define STD_COM_FLAGS (ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST)
-
-#ifdef CONFIG_HD64465
-#include <asm/hd64465.h>
-
-#define SERIAL_PORT_DFNS                   \
-        /* UART CLK   PORT IRQ     FLAGS        */                      \
-        { 0, BASE_BAUD, 0x3F8, HD64465_IRQ_UART, STD_COM_FLAGS }  /* ttyS0 */
-
-#else
-
-#define SERIAL_PORT_DFNS
-
-#endif
-
-#endif /* _ASM_SERIAL_H */
diff --git a/include/asm-sh/system.h b/include/asm-sh/system.h
deleted file mode 100644
index e65b6b822cb3..000000000000
--- a/include/asm-sh/system.h
+++ /dev/null
@@ -1,198 +0,0 @@
-#ifndef __ASM_SH_SYSTEM_H
-#define __ASM_SH_SYSTEM_H
-
-/*
- * Copyright (C) 1999, 2000  Niibe Yutaka  &  Kaz Kojima
- * Copyright (C) 2002 Paul Mundt
- */
-
-#include <linux/irqflags.h>
-#include <linux/compiler.h>
-#include <linux/linkage.h>
-#include <asm/types.h>
-#include <asm/ptrace.h>
-
-#define AT_VECTOR_SIZE_ARCH 5 /* entries in ARCH_DLINFO */
-
-#if defined(CONFIG_CPU_SH4A) || defined(CONFIG_CPU_SH5)
-#define __icbi()			\
-{					\
-	unsigned long __addr;		\
-	__addr = 0xa8000000;		\
-	__asm__ __volatile__(		\
-		"icbi   %0\n\t"		\
-		: /* no output */	\
-		: "m" (__m(__addr)));	\
-}
-#endif
-
-/*
- * A brief note on ctrl_barrier(), the control register write barrier.
- *
- * Legacy SH cores typically require a sequence of 8 nops after
- * modification of a control register in order for the changes to take
- * effect. On newer cores (like the sh4a and sh5) this is accomplished
- * with icbi.
- *
- * Also note that on sh4a in the icbi case we can forego a synco for the
- * write barrier, as it's not necessary for control registers.
- *
- * Historically we have only done this type of barrier for the MMUCR, but
- * it's also necessary for the CCR, so we make it generic here instead.
- */
-#if defined(CONFIG_CPU_SH4A) || defined(CONFIG_CPU_SH5)
-#define mb()		__asm__ __volatile__ ("synco": : :"memory")
-#define rmb()		mb()
-#define wmb()		__asm__ __volatile__ ("synco": : :"memory")
-#define ctrl_barrier()	__icbi()
-#define read_barrier_depends()	do { } while(0)
-#else
-#define mb()		__asm__ __volatile__ ("": : :"memory")
-#define rmb()		mb()
-#define wmb()		__asm__ __volatile__ ("": : :"memory")
-#define ctrl_barrier()	__asm__ __volatile__ ("nop;nop;nop;nop;nop;nop;nop;nop")
-#define read_barrier_depends()	do { } while(0)
-#endif
-
-#ifdef CONFIG_SMP
-#define smp_mb()	mb()
-#define smp_rmb()	rmb()
-#define smp_wmb()	wmb()
-#define smp_read_barrier_depends()	read_barrier_depends()
-#else
-#define smp_mb()	barrier()
-#define smp_rmb()	barrier()
-#define smp_wmb()	barrier()
-#define smp_read_barrier_depends()	do { } while(0)
-#endif
-
-#define set_mb(var, value) do { (void)xchg(&var, value); } while (0)
-
-#ifdef CONFIG_GUSA_RB
-#include <asm/cmpxchg-grb.h>
-#else
-#include <asm/cmpxchg-irq.h>
-#endif
-
-extern void __xchg_called_with_bad_pointer(void);
-
-#define __xchg(ptr, x, size)				\
-({							\
-	unsigned long __xchg__res;			\
-	volatile void *__xchg_ptr = (ptr);		\
-	switch (size) {					\
-	case 4:						\
-		__xchg__res = xchg_u32(__xchg_ptr, x);	\
-		break;					\
-	case 1:						\
-		__xchg__res = xchg_u8(__xchg_ptr, x);	\
-		break;					\
-	default:					\
-		__xchg_called_with_bad_pointer();	\
-		__xchg__res = x;			\
-		break;					\
-	}						\
-							\
-	__xchg__res;					\
-})
-
-#define xchg(ptr,x)	\
-	((__typeof__(*(ptr)))__xchg((ptr),(unsigned long)(x), sizeof(*(ptr))))
-
-/* This function doesn't exist, so you'll get a linker error
- * if something tries to do an invalid cmpxchg(). */
-extern void __cmpxchg_called_with_bad_pointer(void);
-
-#define __HAVE_ARCH_CMPXCHG 1
-
-static inline unsigned long __cmpxchg(volatile void * ptr, unsigned long old,
-		unsigned long new, int size)
-{
-	switch (size) {
-	case 4:
-		return __cmpxchg_u32(ptr, old, new);
-	}
-	__cmpxchg_called_with_bad_pointer();
-	return old;
-}
-
-#define cmpxchg(ptr,o,n)						 \
-  ({									 \
-     __typeof__(*(ptr)) _o_ = (o);					 \
-     __typeof__(*(ptr)) _n_ = (n);					 \
-     (__typeof__(*(ptr))) __cmpxchg((ptr), (unsigned long)_o_,		 \
-				    (unsigned long)_n_, sizeof(*(ptr))); \
-  })
-
-extern void die(const char *str, struct pt_regs *regs, long err) __attribute__ ((noreturn));
-
-extern void *set_exception_table_vec(unsigned int vec, void *handler);
-
-static inline void *set_exception_table_evt(unsigned int evt, void *handler)
-{
-	return set_exception_table_vec(evt >> 5, handler);
-}
-
-/*
- * SH-2A has both 16 and 32-bit opcodes, do lame encoding checks.
- */
-#ifdef CONFIG_CPU_SH2A
-extern unsigned int instruction_size(unsigned int insn);
-#elif defined(CONFIG_SUPERH32)
-#define instruction_size(insn)	(2)
-#else
-#define instruction_size(insn)	(4)
-#endif
-
-extern unsigned long cached_to_uncached;
-
-extern struct dentry *sh_debugfs_root;
-
-/* XXX
- * disable hlt during certain critical i/o operations
- */
-#define HAVE_DISABLE_HLT
-void disable_hlt(void);
-void enable_hlt(void);
-
-void default_idle(void);
-void per_cpu_trap_init(void);
-
-asmlinkage void break_point_trap(void);
-
-#ifdef CONFIG_SUPERH32
-#define BUILD_TRAP_HANDLER(name)					\
-asmlinkage void name##_trap_handler(unsigned long r4, unsigned long r5,	\
-				    unsigned long r6, unsigned long r7,	\
-				    struct pt_regs __regs)
-
-#define TRAP_HANDLER_DECL				\
-	struct pt_regs *regs = RELOC_HIDE(&__regs, 0);	\
-	unsigned int vec = regs->tra;			\
-	(void)vec;
-#else
-#define BUILD_TRAP_HANDLER(name)	\
-asmlinkage void name##_trap_handler(unsigned int vec, struct pt_regs *regs)
-#define TRAP_HANDLER_DECL
-#endif
-
-BUILD_TRAP_HANDLER(address_error);
-BUILD_TRAP_HANDLER(debug);
-BUILD_TRAP_HANDLER(bug);
-BUILD_TRAP_HANDLER(fpu_error);
-BUILD_TRAP_HANDLER(fpu_state_restore);
-
-#define arch_align_stack(x) (x)
-
-struct mem_access {
-	unsigned long (*from)(void *dst, const void *src, unsigned long cnt);
-	unsigned long (*to)(void *dst, const void *src, unsigned long cnt);
-};
-
-#ifdef CONFIG_SUPERH32
-# include "system_32.h"
-#else
-# include "system_64.h"
-#endif
-
-#endif
diff --git a/include/asm-sh/thread_info.h b/include/asm-sh/thread_info.h
deleted file mode 100644
index c50e5d35fe84..000000000000
--- a/include/asm-sh/thread_info.h
+++ /dev/null
@@ -1,137 +0,0 @@
-#ifndef __ASM_SH_THREAD_INFO_H
-#define __ASM_SH_THREAD_INFO_H
-
-/* SuperH version
- * Copyright (C) 2002  Niibe Yutaka
- *
- * The copyright of original i386 version is:
- *
- *  Copyright (C) 2002  David Howells (dhowells@redhat.com)
- *  - Incorporating suggestions made by Linus Torvalds and Dave Miller
- */
-#ifdef __KERNEL__
-#include <asm/page.h>
-
-#ifndef __ASSEMBLY__
-#include <asm/processor.h>
-
-struct thread_info {
-	struct task_struct	*task;		/* main task structure */
-	struct exec_domain	*exec_domain;	/* execution domain */
-	unsigned long		flags;		/* low level flags */
-	__u32			cpu;
-	int			preempt_count; /* 0 => preemptable, <0 => BUG */
-	mm_segment_t		addr_limit;	/* thread address space */
-	struct restart_block	restart_block;
-	unsigned long		previous_sp;	/* sp of previous stack in case
-						   of nested IRQ stacks */
-	__u8			supervisor_stack[0];
-};
-
-#endif
-
-#define PREEMPT_ACTIVE		0x10000000
-
-#if defined(CONFIG_4KSTACKS)
-#define THREAD_SIZE_ORDER	(0)
-#elif defined(CONFIG_PAGE_SIZE_4KB)
-#define THREAD_SIZE_ORDER	(1)
-#elif defined(CONFIG_PAGE_SIZE_8KB)
-#define THREAD_SIZE_ORDER	(1)
-#elif defined(CONFIG_PAGE_SIZE_64KB)
-#define THREAD_SIZE_ORDER	(0)
-#else
-#error "Unknown thread size"
-#endif
-
-#define THREAD_SIZE	(PAGE_SIZE << THREAD_SIZE_ORDER)
-#define STACK_WARN	(THREAD_SIZE >> 3)
-
-/*
- * macros/functions for gaining access to the thread information structure
- */
-#ifndef __ASSEMBLY__
-#define INIT_THREAD_INFO(tsk)			\
-{						\
-	.task		= &tsk,			\
-	.exec_domain	= &default_exec_domain,	\
-	.flags		= 0,			\
-	.cpu		= 0,			\
-	.preempt_count	= 1,			\
-	.addr_limit	= KERNEL_DS,		\
-	.restart_block	= {			\
-		.fn = do_no_restart_syscall,	\
-	},					\
-}
-
-#define init_thread_info	(init_thread_union.thread_info)
-#define init_stack		(init_thread_union.stack)
-
-/* how to get the current stack pointer from C */
-register unsigned long current_stack_pointer asm("r15") __used;
-
-/* how to get the thread information struct from C */
-static inline struct thread_info *current_thread_info(void)
-{
-	struct thread_info *ti;
-#if defined(CONFIG_SUPERH64)
-	__asm__ __volatile__ ("getcon	cr17, %0" : "=r" (ti));
-#elif defined(CONFIG_CPU_HAS_SR_RB)
-	__asm__ __volatile__ ("stc	r7_bank, %0" : "=r" (ti));
-#else
-	unsigned long __dummy;
-
-	__asm__ __volatile__ (
-		"mov	r15, %0\n\t"
-		"and	%1, %0\n\t"
-		: "=&r" (ti), "=r" (__dummy)
-		: "1" (~(THREAD_SIZE - 1))
-		: "memory");
-#endif
-
-	return ti;
-}
-
-/* thread information allocation */
-#ifdef CONFIG_DEBUG_STACK_USAGE
-#define alloc_thread_info(ti)	kzalloc(THREAD_SIZE, GFP_KERNEL)
-#else
-#define alloc_thread_info(ti)	kmalloc(THREAD_SIZE, GFP_KERNEL)
-#endif
-#define free_thread_info(ti)	kfree(ti)
-
-#endif /* __ASSEMBLY__ */
-
-/*
- * thread information flags
- * - these are process state flags that various assembly files may need to access
- * - pending work-to-be-done flags are in LSW
- * - other flags in MSW
- */
-#define TIF_SYSCALL_TRACE	0	/* syscall trace active */
-#define TIF_SIGPENDING		1	/* signal pending */
-#define TIF_NEED_RESCHED	2	/* rescheduling necessary */
-#define TIF_RESTORE_SIGMASK	3	/* restore signal mask in do_signal() */
-#define TIF_SINGLESTEP		4	/* singlestepping active */
-#define TIF_SYSCALL_AUDIT	5
-#define TIF_USEDFPU		16	/* FPU was used by this task this quantum (SMP) */
-#define TIF_POLLING_NRFLAG	17	/* true if poll_idle() is polling TIF_NEED_RESCHED */
-#define TIF_MEMDIE		18
-#define TIF_FREEZE		19
-
-#define _TIF_SYSCALL_TRACE	(1<<TIF_SYSCALL_TRACE)
-#define _TIF_SIGPENDING		(1<<TIF_SIGPENDING)
-#define _TIF_NEED_RESCHED	(1<<TIF_NEED_RESCHED)
-#define _TIF_RESTORE_SIGMASK	(1<<TIF_RESTORE_SIGMASK)
-#define _TIF_SINGLESTEP		(1<<TIF_SINGLESTEP)
-#define _TIF_SYSCALL_AUDIT		(1<<TIF_SYSCALL_AUDIT)
-#define _TIF_USEDFPU		(1<<TIF_USEDFPU)
-#define _TIF_POLLING_NRFLAG	(1<<TIF_POLLING_NRFLAG)
-#define _TIF_FREEZE		(1<<TIF_FREEZE)
-
-#define _TIF_WORK_MASK		0x000000FE	/* work to do on interrupt/exception return */
-#define _TIF_ALLWORK_MASK	0x000000FF	/* work to do on any return to u-space */
-
-#endif /* __KERNEL__ */
-
-#endif /* __ASM_SH_THREAD_INFO_H */
diff --git a/include/asm-sh/timer.h b/include/asm-sh/timer.h
deleted file mode 100644
index 701ba84c7049..000000000000
--- a/include/asm-sh/timer.h
+++ /dev/null
@@ -1,45 +0,0 @@
-#ifndef __ASM_SH_TIMER_H
-#define __ASM_SH_TIMER_H
-
-#include <linux/sysdev.h>
-#include <linux/clocksource.h>
-#include <asm/cpu/timer.h>
-
-struct sys_timer_ops {
-	int (*init)(void);
-	int (*start)(void);
-	int (*stop)(void);
-	cycle_t (*read)(void);
-#ifndef CONFIG_GENERIC_TIME
-	unsigned long (*get_offset)(void);
-#endif
-};
-
-struct sys_timer {
-	const char		*name;
-
-	struct sys_device	dev;
-	struct sys_timer_ops	*ops;
-};
-
-#define TICK_SIZE (tick_nsec / 1000)
-
-extern struct sys_timer tmu_timer, cmt_timer, mtu2_timer;
-extern struct sys_timer *sys_timer;
-
-#ifndef CONFIG_GENERIC_TIME
-static inline unsigned long get_timer_offset(void)
-{
-	return sys_timer->ops->get_offset();
-}
-#endif
-
-/* arch/sh/kernel/timers/timer.c */
-struct sys_timer *get_sys_timer(void);
-
-/* arch/sh/kernel/time.c */
-void handle_timer_tick(void);
-extern unsigned long sh_hpt_frequency;
-extern struct clocksource clocksource_sh;
-
-#endif /* __ASM_SH_TIMER_H */
diff --git a/include/asm-sh/uaccess.h b/include/asm-sh/uaccess.h
deleted file mode 100644
index b3440c305b5d..000000000000
--- a/include/asm-sh/uaccess.h
+++ /dev/null
@@ -1,34 +0,0 @@
-#ifndef __ASM_SH_UACCESS_H
-#define __ASM_SH_UACCESS_H
-
-#ifdef CONFIG_SUPERH32
-# include "uaccess_32.h"
-#else
-# include "uaccess_64.h"
-#endif
-
-static inline unsigned long
-copy_from_user(void *to, const void __user *from, unsigned long n)
-{
-	unsigned long __copy_from = (unsigned long) from;
-	__kernel_size_t __copy_size = (__kernel_size_t) n;
-
-	if (__copy_size && __access_ok(__copy_from, __copy_size))
-		return __copy_user(to, from, __copy_size);
-
-	return __copy_size;
-}
-
-static inline unsigned long
-copy_to_user(void __user *to, const void *from, unsigned long n)
-{
-	unsigned long __copy_to = (unsigned long) to;
-	__kernel_size_t __copy_size = (__kernel_size_t) n;
-
-	if (__copy_size && __access_ok(__copy_to, __copy_size))
-		return __copy_user(to, from, __copy_size);
-
-	return __copy_size;
-}
-
-#endif /* __ASM_SH_UACCESS_H */
diff --git a/include/asm-sh/uaccess_32.h b/include/asm-sh/uaccess_32.h
deleted file mode 100644
index 1e41fda74bd3..000000000000
--- a/include/asm-sh/uaccess_32.h
+++ /dev/null
@@ -1,489 +0,0 @@
-/* $Id: uaccess.h,v 1.11 2003/10/13 07:21:20 lethal Exp $
- *
- * User space memory access functions
- *
- * Copyright (C) 1999, 2002  Niibe Yutaka
- * Copyright (C) 2003  Paul Mundt
- *
- *  Based on:
- *     MIPS implementation version 1.15 by
- *              Copyright (C) 1996, 1997, 1998 by Ralf Baechle
- *     and i386 version.
- */
-#ifndef __ASM_SH_UACCESS_32_H
-#define __ASM_SH_UACCESS_32_H
-
-#include <linux/errno.h>
-#include <linux/sched.h>
-
-#define VERIFY_READ    0
-#define VERIFY_WRITE   1
-
-/*
- * The fs value determines whether argument validity checking should be
- * performed or not.  If get_fs() == USER_DS, checking is performed, with
- * get_fs() == KERNEL_DS, checking is bypassed.
- *
- * For historical reasons (Data Segment Register?), these macros are misnamed.
- */
-
-#define MAKE_MM_SEG(s)	((mm_segment_t) { (s) })
-
-#define KERNEL_DS	MAKE_MM_SEG(0xFFFFFFFFUL)
-#define USER_DS		MAKE_MM_SEG(PAGE_OFFSET)
-
-#define segment_eq(a,b)	((a).seg == (b).seg)
-
-#define get_ds()	(KERNEL_DS)
-
-#if !defined(CONFIG_MMU)
-/* NOMMU is always true */
-#define __addr_ok(addr) (1)
-
-static inline mm_segment_t get_fs(void)
-{
-	return USER_DS;
-}
-
-static inline void set_fs(mm_segment_t s)
-{
-}
-
-/*
- * __access_ok: Check if address with size is OK or not.
- *
- * If we don't have an MMU (or if its disabled) the only thing we really have
- * to look out for is if the address resides somewhere outside of what
- * available RAM we have.
- */
-static inline int __access_ok(unsigned long addr, unsigned long size)
-{
-	return 1;
-}
-#else /* CONFIG_MMU */
-#define __addr_ok(addr) \
-	((unsigned long)(addr) < (current_thread_info()->addr_limit.seg))
-
-#define get_fs()	(current_thread_info()->addr_limit)
-#define set_fs(x)	(current_thread_info()->addr_limit = (x))
-
-/*
- * __access_ok: Check if address with size is OK or not.
- *
- * Uhhuh, this needs 33-bit arithmetic. We have a carry..
- *
- * sum := addr + size;  carry? --> flag = true;
- * if (sum >= addr_limit) flag = true;
- */
-static inline int __access_ok(unsigned long addr, unsigned long size)
-{
-	unsigned long flag, sum;
-
-	__asm__("clrt\n\t"
-		"addc	%3, %1\n\t"
-		"movt	%0\n\t"
-		"cmp/hi	%4, %1\n\t"
-		"rotcl	%0"
-		:"=&r" (flag), "=r" (sum)
-		:"1" (addr), "r" (size),
-		 "r" (current_thread_info()->addr_limit.seg)
-		:"t");
-	return flag == 0;
-}
-#endif /* CONFIG_MMU */
-
-#define access_ok(type, addr, size)	\
-	(__chk_user_ptr(addr),		\
-	 __access_ok((unsigned long __force)(addr), (size)))
-
-/*
- * Uh, these should become the main single-value transfer routines ...
- * They automatically use the right size if we just have the right
- * pointer type ...
- *
- * As SuperH uses the same address space for kernel and user data, we
- * can just do these as direct assignments.
- *
- * Careful to not
- * (a) re-use the arguments for side effects (sizeof is ok)
- * (b) require any knowledge of processes at this stage
- */
-#define put_user(x,ptr)		__put_user_check((x), (ptr), sizeof(*(ptr)))
-#define get_user(x,ptr)		__get_user_check((x), (ptr), sizeof(*(ptr)))
-
-/*
- * The "__xxx" versions do not do address space checking, useful when
- * doing multiple accesses to the same area (the user has to do the
- * checks by hand with "access_ok()")
- */
-#define __put_user(x,ptr)	__put_user_nocheck((x), (ptr), sizeof(*(ptr)))
-#define __get_user(x,ptr)	__get_user_nocheck((x), (ptr), sizeof(*(ptr)))
-
-struct __large_struct { unsigned long buf[100]; };
-#define __m(x) (*(struct __large_struct __user *)(x))
-
-#define __get_user_size(x,ptr,size,retval)			\
-do {								\
-	retval = 0;						\
-	switch (size) {						\
-	case 1:							\
-		__get_user_asm(x, ptr, retval, "b");		\
-		break;						\
-	case 2:							\
-		__get_user_asm(x, ptr, retval, "w");		\
-		break;						\
-	case 4:							\
-		__get_user_asm(x, ptr, retval, "l");		\
-		break;						\
-	default:						\
-		__get_user_unknown();				\
-		break;						\
-	}							\
-} while (0)
-
-#define __get_user_nocheck(x,ptr,size)				\
-({								\
-	long __gu_err;						\
-	unsigned long __gu_val;					\
-	const __typeof__(*(ptr)) __user *__gu_addr = (ptr);	\
-	__chk_user_ptr(ptr);					\
-	__get_user_size(__gu_val, __gu_addr, (size), __gu_err);	\
-	(x) = (__typeof__(*(ptr)))__gu_val;			\
-	__gu_err;						\
-})
-
-#define __get_user_check(x,ptr,size)					\
-({									\
-	long __gu_err = -EFAULT;					\
-	unsigned long __gu_val = 0;					\
-	const __typeof__(*(ptr)) *__gu_addr = (ptr);			\
-	if (likely(access_ok(VERIFY_READ, __gu_addr, (size))))		\
-		__get_user_size(__gu_val, __gu_addr, (size), __gu_err);	\
-	(x) = (__typeof__(*(ptr)))__gu_val;				\
-	__gu_err;							\
-})
-
-#define __get_user_asm(x, addr, err, insn) \
-({ \
-__asm__ __volatile__( \
-	"1:\n\t" \
-	"mov." insn "	%2, %1\n\t" \
-	"2:\n" \
-	".section	.fixup,\"ax\"\n" \
-	"3:\n\t" \
-	"mov	#0, %1\n\t" \
-	"mov.l	4f, %0\n\t" \
-	"jmp	@%0\n\t" \
-	" mov	%3, %0\n\t" \
-	".balign	4\n" \
-	"4:	.long	2b\n\t" \
-	".previous\n" \
-	".section	__ex_table,\"a\"\n\t" \
-	".long	1b, 3b\n\t" \
-	".previous" \
-	:"=&r" (err), "=&r" (x) \
-	:"m" (__m(addr)), "i" (-EFAULT), "0" (err)); })
-
-extern void __get_user_unknown(void);
-
-#define __put_user_size(x,ptr,size,retval)		\
-do {							\
-	retval = 0;					\
-	switch (size) {					\
-	case 1:						\
-		__put_user_asm(x, ptr, retval, "b");	\
-		break;					\
-	case 2:						\
-		__put_user_asm(x, ptr, retval, "w");	\
-		break;					\
-	case 4:						\
-		__put_user_asm(x, ptr, retval, "l");	\
-		break;					\
-	case 8:						\
-		__put_user_u64(x, ptr, retval);		\
-		break;					\
-	default:					\
-		__put_user_unknown();			\
-	}						\
-} while (0)
-
-#define __put_user_nocheck(x,ptr,size)				\
-({								\
-	long __pu_err;						\
-	__typeof__(*(ptr)) __user *__pu_addr = (ptr);		\
-	__chk_user_ptr(ptr);					\
-	__put_user_size((x), __pu_addr, (size), __pu_err);	\
-	__pu_err;						\
-})
-
-#define __put_user_check(x,ptr,size)				\
-({								\
-	long __pu_err = -EFAULT;				\
-	__typeof__(*(ptr)) __user *__pu_addr = (ptr);		\
-	if (likely(access_ok(VERIFY_WRITE, __pu_addr, size)))	\
-		__put_user_size((x), __pu_addr, (size),		\
-				__pu_err);			\
-	__pu_err;						\
-})
-
-#define __put_user_asm(x, addr, err, insn) \
-({ \
-__asm__ __volatile__( \
-	"1:\n\t" \
-	"mov." insn "	%1, %2\n\t" \
-	"2:\n" \
-	".section	.fixup,\"ax\"\n" \
-	"3:\n\t" \
-	"mov.l	4f, %0\n\t" \
-	"jmp	@%0\n\t" \
-	" mov	%3, %0\n\t" \
-	".balign	4\n" \
-	"4:	.long	2b\n\t" \
-	".previous\n" \
-	".section	__ex_table,\"a\"\n\t" \
-	".long	1b, 3b\n\t" \
-	".previous" \
-	:"=&r" (err) \
-	:"r" (x), "m" (__m(addr)), "i" (-EFAULT), "0" (err)	\
-        :"memory"); })
-
-#if defined(CONFIG_CPU_LITTLE_ENDIAN)
-#define __put_user_u64(val,addr,retval) \
-({ \
-__asm__ __volatile__( \
-	"1:\n\t" \
-	"mov.l	%R1,%2\n\t" \
-	"mov.l	%S1,%T2\n\t" \
-	"2:\n" \
-	".section	.fixup,\"ax\"\n" \
-	"3:\n\t" \
-	"mov.l	4f,%0\n\t" \
-	"jmp	@%0\n\t" \
-	" mov	%3,%0\n\t" \
-	".balign	4\n" \
-	"4:	.long	2b\n\t" \
-	".previous\n" \
-	".section	__ex_table,\"a\"\n\t" \
-	".long	1b, 3b\n\t" \
-	".previous" \
-	: "=r" (retval) \
-	: "r" (val), "m" (__m(addr)), "i" (-EFAULT), "0" (retval) \
-        : "memory"); })
-#else
-#define __put_user_u64(val,addr,retval) \
-({ \
-__asm__ __volatile__( \
-	"1:\n\t" \
-	"mov.l	%S1,%2\n\t" \
-	"mov.l	%R1,%T2\n\t" \
-	"2:\n" \
-	".section	.fixup,\"ax\"\n" \
-	"3:\n\t" \
-	"mov.l	4f,%0\n\t" \
-	"jmp	@%0\n\t" \
-	" mov	%3,%0\n\t" \
-	".balign	4\n" \
-	"4:	.long	2b\n\t" \
-	".previous\n" \
-	".section	__ex_table,\"a\"\n\t" \
-	".long	1b, 3b\n\t" \
-	".previous" \
-	: "=r" (retval) \
-	: "r" (val), "m" (__m(addr)), "i" (-EFAULT), "0" (retval) \
-        : "memory"); })
-#endif
-
-extern void __put_user_unknown(void);
-
-/* Generic arbitrary sized copy.  */
-/* Return the number of bytes NOT copied */
-__kernel_size_t __copy_user(void *to, const void *from, __kernel_size_t n);
-
-
-static __always_inline unsigned long
-__copy_from_user(void *to, const void __user *from, unsigned long n)
-{
-	return __copy_user(to, (__force void *)from, n);
-}
-
-static __always_inline unsigned long __must_check
-__copy_to_user(void __user *to, const void *from, unsigned long n)
-{
-	return __copy_user((__force void *)to, from, n);
-}
-
-#define __copy_to_user_inatomic __copy_to_user
-#define __copy_from_user_inatomic __copy_from_user
-
-/*
- * Clear the area and return remaining number of bytes
- * (on failure.  Usually it's 0.)
- */
-extern __kernel_size_t __clear_user(void *addr, __kernel_size_t size);
-
-#define clear_user(addr,n) ({ \
-void * __cl_addr = (addr); \
-unsigned long __cl_size = (n); \
-if (__cl_size && __access_ok(((unsigned long)(__cl_addr)), __cl_size)) \
-__cl_size = __clear_user(__cl_addr, __cl_size); \
-__cl_size; })
-
-static __inline__ int
-__strncpy_from_user(unsigned long __dest, unsigned long __user __src, int __count)
-{
-	__kernel_size_t res;
-	unsigned long __dummy, _d, _s, _c;
-
-	__asm__ __volatile__(
-		"9:\n"
-		"mov.b	@%2+, %1\n\t"
-		"cmp/eq	#0, %1\n\t"
-		"bt/s	2f\n"
-		"1:\n"
-		"mov.b	%1, @%3\n\t"
-		"dt	%4\n\t"
-		"bf/s	9b\n\t"
-		" add	#1, %3\n\t"
-		"2:\n\t"
-		"sub	%4, %0\n"
-		"3:\n"
-		".section .fixup,\"ax\"\n"
-		"4:\n\t"
-		"mov.l	5f, %1\n\t"
-		"jmp	@%1\n\t"
-		" mov	%9, %0\n\t"
-		".balign 4\n"
-		"5:	.long 3b\n"
-		".previous\n"
-		".section __ex_table,\"a\"\n"
-		"	.balign 4\n"
-		"	.long 9b,4b\n"
-		".previous"
-		: "=r" (res), "=&z" (__dummy), "=r" (_s), "=r" (_d), "=r"(_c)
-		: "0" (__count), "2" (__src), "3" (__dest), "4" (__count),
-		  "i" (-EFAULT)
-		: "memory", "t");
-
-	return res;
-}
-
-/**
- * strncpy_from_user: - Copy a NUL terminated string from userspace.
- * @dst:   Destination address, in kernel space.  This buffer must be at
- *         least @count bytes long.
- * @src:   Source address, in user space.
- * @count: Maximum number of bytes to copy, including the trailing NUL.
- *
- * Copies a NUL-terminated string from userspace to kernel space.
- *
- * On success, returns the length of the string (not including the trailing
- * NUL).
- *
- * If access to userspace fails, returns -EFAULT (some data may have been
- * copied).
- *
- * If @count is smaller than the length of the string, copies @count bytes
- * and returns @count.
- */
-#define strncpy_from_user(dest,src,count) ({ \
-unsigned long __sfu_src = (unsigned long) (src); \
-int __sfu_count = (int) (count); \
-long __sfu_res = -EFAULT; \
-if(__access_ok(__sfu_src, __sfu_count)) { \
-__sfu_res = __strncpy_from_user((unsigned long) (dest), __sfu_src, __sfu_count); \
-} __sfu_res; })
-
-/*
- * Return the size of a string (including the ending 0 even when we have
- * exceeded the maximum string length).
- */
-static __inline__ long __strnlen_user(const char __user *__s, long __n)
-{
-	unsigned long res;
-	unsigned long __dummy;
-
-	__asm__ __volatile__(
-		"1:\t"
-		"mov.b	@(%0,%3), %1\n\t"
-		"cmp/eq	%4, %0\n\t"
-		"bt/s	2f\n\t"
-		" add	#1, %0\n\t"
-		"tst	%1, %1\n\t"
-		"bf	1b\n\t"
-		"2:\n"
-		".section .fixup,\"ax\"\n"
-		"3:\n\t"
-		"mov.l	4f, %1\n\t"
-		"jmp	@%1\n\t"
-		" mov	#0, %0\n"
-		".balign 4\n"
-		"4:	.long 2b\n"
-		".previous\n"
-		".section __ex_table,\"a\"\n"
-		"	.balign 4\n"
-		"	.long 1b,3b\n"
-		".previous"
-		: "=z" (res), "=&r" (__dummy)
-		: "0" (0), "r" (__s), "r" (__n)
-		: "t");
-	return res;
-}
-
-/**
- * strnlen_user: - Get the size of a string in user space.
- * @s: The string to measure.
- * @n: The maximum valid length
- *
- * Context: User context only.  This function may sleep.
- *
- * Get the size of a NUL-terminated string in user space.
- *
- * Returns the size of the string INCLUDING the terminating NUL.
- * On exception, returns 0.
- * If the string is too long, returns a value greater than @n.
- */
-static __inline__ long strnlen_user(const char __user *s, long n)
-{
-	if (!__addr_ok(s))
-		return 0;
-	else
-		return __strnlen_user(s, n);
-}
-
-/**
- * strlen_user: - Get the size of a string in user space.
- * @str: The string to measure.
- *
- * Context: User context only.  This function may sleep.
- *
- * Get the size of a NUL-terminated string in user space.
- *
- * Returns the size of the string INCLUDING the terminating NUL.
- * On exception, returns 0.
- *
- * If there is a limit on the length of a valid string, you may wish to
- * consider using strnlen_user() instead.
- */
-#define strlen_user(str)	strnlen_user(str, ~0UL >> 1)
-
-/*
- * The exception table consists of pairs of addresses: the first is the
- * address of an instruction that is allowed to fault, and the second is
- * the address at which the program should continue.  No registers are
- * modified, so it is entirely up to the continuation code to figure out
- * what to do.
- *
- * All the routines below use bits of fixup code that are out of line
- * with the main instruction path.  This means when everything is well,
- * we don't even have to jump over them.  Further, they do not intrude
- * on our cache or tlb entries.
- */
-
-struct exception_table_entry
-{
-	unsigned long insn, fixup;
-};
-
-extern int fixup_exception(struct pt_regs *regs);
-
-#endif /* __ASM_SH_UACCESS_32_H */
diff --git a/include/asm-sh/uaccess_64.h b/include/asm-sh/uaccess_64.h
deleted file mode 100644
index a9b68d094844..000000000000
--- a/include/asm-sh/uaccess_64.h
+++ /dev/null
@@ -1,285 +0,0 @@
-#ifndef __ASM_SH_UACCESS_64_H
-#define __ASM_SH_UACCESS_64_H
-
-/*
- * include/asm-sh/uaccess_64.h
- *
- * Copyright (C) 2000, 2001  Paolo Alberelli
- * Copyright (C) 2003, 2004  Paul Mundt
- *
- * User space memory access functions
- *
- * Copyright (C) 1999  Niibe Yutaka
- *
- *  Based on:
- *     MIPS implementation version 1.15 by
- *              Copyright (C) 1996, 1997, 1998 by Ralf Baechle
- *     and i386 version.
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-#include <linux/errno.h>
-#include <linux/sched.h>
-
-#define VERIFY_READ    0
-#define VERIFY_WRITE   1
-
-/*
- * The fs value determines whether argument validity checking should be
- * performed or not.  If get_fs() == USER_DS, checking is performed, with
- * get_fs() == KERNEL_DS, checking is bypassed.
- *
- * For historical reasons (Data Segment Register?), these macros are misnamed.
- */
-
-#define MAKE_MM_SEG(s)	((mm_segment_t) { (s) })
-
-#define KERNEL_DS	MAKE_MM_SEG(0xFFFFFFFF)
-#define USER_DS		MAKE_MM_SEG(0x80000000)
-
-#define get_ds()	(KERNEL_DS)
-#define get_fs()        (current_thread_info()->addr_limit)
-#define set_fs(x)       (current_thread_info()->addr_limit=(x))
-
-#define segment_eq(a,b)	((a).seg == (b).seg)
-
-#define __addr_ok(addr) ((unsigned long)(addr) < (current_thread_info()->addr_limit.seg))
-
-/*
- * Uhhuh, this needs 33-bit arithmetic. We have a carry..
- *
- * sum := addr + size;  carry? --> flag = true;
- * if (sum >= addr_limit) flag = true;
- */
-#define __range_ok(addr,size) (((unsigned long) (addr) + (size) < (current_thread_info()->addr_limit.seg)) ? 0 : 1)
-
-#define access_ok(type,addr,size) (__range_ok(addr,size) == 0)
-#define __access_ok(addr,size) (__range_ok(addr,size) == 0)
-
-/*
- * Uh, these should become the main single-value transfer routines ...
- * They automatically use the right size if we just have the right
- * pointer type ...
- *
- * As MIPS uses the same address space for kernel and user data, we
- * can just do these as direct assignments.
- *
- * Careful to not
- * (a) re-use the arguments for side effects (sizeof is ok)
- * (b) require any knowledge of processes at this stage
- */
-#define put_user(x,ptr)	__put_user_check((x),(ptr),sizeof(*(ptr)))
-#define get_user(x,ptr) __get_user_check((x),(ptr),sizeof(*(ptr)))
-
-/*
- * The "__xxx" versions do not do address space checking, useful when
- * doing multiple accesses to the same area (the user has to do the
- * checks by hand with "access_ok()")
- */
-#define __put_user(x,ptr) __put_user_nocheck((x),(ptr),sizeof(*(ptr)))
-#define __get_user(x,ptr) __get_user_nocheck((x),(ptr),sizeof(*(ptr)))
-
-/*
- * The "xxx_ret" versions return constant specified in third argument, if
- * something bad happens. These macros can be optimized for the
- * case of just returning from the function xxx_ret is used.
- */
-
-#define put_user_ret(x,ptr,ret) ({ \
-if (put_user(x,ptr)) return ret; })
-
-#define get_user_ret(x,ptr,ret) ({ \
-if (get_user(x,ptr)) return ret; })
-
-#define __put_user_ret(x,ptr,ret) ({ \
-if (__put_user(x,ptr)) return ret; })
-
-#define __get_user_ret(x,ptr,ret) ({ \
-if (__get_user(x,ptr)) return ret; })
-
-struct __large_struct { unsigned long buf[100]; };
-#define __m(x) (*(struct __large_struct *)(x))
-
-#define __get_user_size(x,ptr,size,retval)			\
-do {								\
-	retval = 0;						\
-	switch (size) {						\
-	case 1:							\
-		retval = __get_user_asm_b(x, ptr);		\
-		break;						\
-	case 2:							\
-		retval = __get_user_asm_w(x, ptr);		\
-		break;						\
-	case 4:							\
-		retval = __get_user_asm_l(x, ptr);		\
-		break;						\
-	case 8:							\
-		retval = __get_user_asm_q(x, ptr);		\
-		break;						\
-	default:						\
-		__get_user_unknown();				\
-		break;						\
-	}							\
-} while (0)
-
-#define __get_user_nocheck(x,ptr,size)				\
-({								\
-	long __gu_err, __gu_val;				\
-	__get_user_size((void *)&__gu_val, (long)(ptr),		\
-			(size), __gu_err);			\
-	(x) = (__typeof__(*(ptr)))__gu_val;			\
-	__gu_err;						\
-})
-
-#define __get_user_check(x,ptr,size)				\
-({								\
-	long __gu_addr = (long)(ptr);				\
-	long __gu_err = -EFAULT, __gu_val;			\
-	if (__access_ok(__gu_addr, (size)))			\
-		__get_user_size((void *)&__gu_val, __gu_addr,	\
-				(size), __gu_err);		\
-	(x) = (__typeof__(*(ptr))) __gu_val;			\
-	__gu_err;						\
-})
-
-extern long __get_user_asm_b(void *, long);
-extern long __get_user_asm_w(void *, long);
-extern long __get_user_asm_l(void *, long);
-extern long __get_user_asm_q(void *, long);
-extern void __get_user_unknown(void);
-
-#define __put_user_size(x,ptr,size,retval)			\
-do {								\
-	retval = 0;						\
-	switch (size) {						\
-	case 1:							\
-		retval = __put_user_asm_b(x, ptr);		\
-		break;						\
-	case 2:							\
-		retval = __put_user_asm_w(x, ptr);		\
-		break;						\
-	case 4:							\
-		retval = __put_user_asm_l(x, ptr);		\
-		break;						\
-	case 8:							\
-		retval = __put_user_asm_q(x, ptr);		\
-		break;						\
-	default:						\
-		__put_user_unknown();				\
-	}							\
-} while (0)
-
-#define __put_user_nocheck(x,ptr,size)				\
-({								\
-	long __pu_err;						\
-	__typeof__(*(ptr)) __pu_val = (x);			\
-	__put_user_size((void *)&__pu_val, (long)(ptr), (size), __pu_err); \
-	__pu_err;						\
-})
-
-#define __put_user_check(x,ptr,size)				\
-({								\
-	long __pu_err = -EFAULT;				\
-	long __pu_addr = (long)(ptr);				\
-	__typeof__(*(ptr)) __pu_val = (x);			\
-								\
-	if (__access_ok(__pu_addr, (size)))			\
-		__put_user_size((void *)&__pu_val, __pu_addr, (size), __pu_err);\
-	__pu_err;						\
-})
-
-extern long __put_user_asm_b(void *, long);
-extern long __put_user_asm_w(void *, long);
-extern long __put_user_asm_l(void *, long);
-extern long __put_user_asm_q(void *, long);
-extern void __put_user_unknown(void);
-
-
-/* Generic arbitrary sized copy.  */
-/* Return the number of bytes NOT copied */
-/* XXX: should be such that: 4byte and the rest. */
-extern __kernel_size_t __copy_user(void *__to, const void *__from, __kernel_size_t __n);
-
-#define copy_to_user_ret(to,from,n,retval) ({ \
-if (copy_to_user(to,from,n)) \
-	return retval; \
-})
-
-#define __copy_to_user(to,from,n)		\
-	__copy_user((void *)(to),		\
-		    (void *)(from), n)
-
-#define __copy_to_user_ret(to,from,n,retval) ({ \
-if (__copy_to_user(to,from,n)) \
-	return retval; \
-})
-
-#define copy_from_user_ret(to,from,n,retval) ({ \
-if (copy_from_user(to,from,n)) \
-	return retval; \
-})
-
-#define __copy_from_user(to,from,n)		\
-	__copy_user((void *)(to),		\
-		    (void *)(from), n)
-
-#define __copy_from_user_ret(to,from,n,retval) ({ \
-if (__copy_from_user(to,from,n)) \
-	return retval; \
-})
-
-#define __copy_to_user_inatomic __copy_to_user
-#define __copy_from_user_inatomic __copy_from_user
-
-/* XXX: Not sure it works well..
-   should be such that: 4byte clear and the rest. */
-extern __kernel_size_t __clear_user(void *addr, __kernel_size_t size);
-
-#define clear_user(addr,n) ({ \
-void * __cl_addr = (addr); \
-unsigned long __cl_size = (n); \
-if (__cl_size && __access_ok(((unsigned long)(__cl_addr)), __cl_size)) \
-__cl_size = __clear_user(__cl_addr, __cl_size); \
-__cl_size; })
-
-extern int __strncpy_from_user(unsigned long __dest, unsigned long __src, int __count);
-
-#define strncpy_from_user(dest,src,count) ({ \
-unsigned long __sfu_src = (unsigned long) (src); \
-int __sfu_count = (int) (count); \
-long __sfu_res = -EFAULT; \
-if(__access_ok(__sfu_src, __sfu_count)) { \
-__sfu_res = __strncpy_from_user((unsigned long) (dest), __sfu_src, __sfu_count); \
-} __sfu_res; })
-
-#define strlen_user(str) strnlen_user(str, ~0UL >> 1)
-
-/*
- * Return the size of a string (including the ending 0!)
- */
-extern long __strnlen_user(const char *__s, long __n);
-
-static inline long strnlen_user(const char *s, long n)
-{
-	if (!__addr_ok(s))
-		return 0;
-	else
-		return __strnlen_user(s, n);
-}
-
-struct exception_table_entry
-{
-	unsigned long insn, fixup;
-};
-
-#ifdef CONFIG_MMU
-#define ARCH_HAS_SEARCH_EXTABLE
-#endif
-
-/* Returns 0 if exception not found and fixup.unit otherwise.  */
-extern unsigned long search_exception_table(unsigned long addr);
-extern const struct exception_table_entry *search_exception_tables (unsigned long addr);
-
-#endif /* __ASM_SH_UACCESS_64_H */
diff --git a/include/asm-sh/ubc.h b/include/asm-sh/ubc.h
deleted file mode 100644
index 56f4e30dc49c..000000000000
--- a/include/asm-sh/ubc.h
+++ /dev/null
@@ -1,64 +0,0 @@
-/*
- * include/asm-sh/ubc.h
- *
- * Copyright (C) 1999 Niibe Yutaka
- * Copyright (C) 2002, 2003 Paul Mundt
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-#ifndef __ASM_SH_UBC_H
-#define __ASM_SH_UBC_H
-#ifdef __KERNEL__
-
-#include <asm/cpu/ubc.h>
-
-/* User Break Controller */
-#if defined(CONFIG_CPU_SUBTYPE_SH7707) || defined(CONFIG_CPU_SUBTYPE_SH7709)
-#define UBC_TYPE_SH7729	(current_cpu_data.type == CPU_SH7729)
-#else
-#define UBC_TYPE_SH7729	0
-#endif
-
-#define BAMR_ASID		(1 << 2)
-#define BAMR_NONE		0
-#define BAMR_10			0x1
-#define BAMR_12			0x2
-#define BAMR_ALL		0x3
-#define BAMR_16			0x8
-#define BAMR_20			0x9
-
-#define BBR_INST		(1 << 4)
-#define BBR_DATA		(2 << 4)
-#define BBR_READ		(1 << 2)
-#define BBR_WRITE		(2 << 2)
-#define BBR_BYTE		0x1
-#define BBR_HALF		0x2
-#define BBR_LONG		0x3
-#define BBR_QUAD		(1 << 6)	/* SH7750 */
-#define BBR_CPU			(1 << 6)	/* SH7709A,SH7729 */
-#define BBR_DMA			(2 << 6)	/* SH7709A,SH7729 */
-
-#define BRCR_CMFA		(1 << 15)
-#define BRCR_CMFB		(1 << 14)
-#define BRCR_PCTE		(1 << 11)
-#define BRCR_PCBA		(1 << 10)	/* 1: after execution */
-#define BRCR_DBEB		(1 << 7)
-#define BRCR_PCBB		(1 << 6)
-#define BRCR_SEQ		(1 << 3)
-#define BRCR_UBDE		(1 << 0)
-
-#ifndef __ASSEMBLY__
-/* arch/sh/kernel/cpu/ubc.S */
-extern void ubc_sleep(void);
-
-#ifdef CONFIG_UBC_WAKEUP
-extern void ubc_wakeup(void);
-#else
-#define ubc_wakeup()	do { } while (0)
-#endif
-#endif
-
-#endif /* __KERNEL__ */
-#endif /* __ASM_SH_UBC_H */
diff --git a/include/asm-sh/unistd.h b/include/asm-sh/unistd.h
deleted file mode 100644
index 4b21f369c28c..000000000000
--- a/include/asm-sh/unistd.h
+++ /dev/null
@@ -1,5 +0,0 @@
-#ifdef CONFIG_SUPERH32
-# include "unistd_32.h"
-#else
-# include "unistd_64.h"
-#endif
diff --git a/include/asm-sh/unistd_32.h b/include/asm-sh/unistd_32.h
deleted file mode 100644
index 0b07212ec659..000000000000
--- a/include/asm-sh/unistd_32.h
+++ /dev/null
@@ -1,378 +0,0 @@
-#ifndef __ASM_SH_UNISTD_H
-#define __ASM_SH_UNISTD_H
-
-/*
- * Copyright (C) 1999  Niibe Yutaka
- */
-
-/*
- * This file contains the system call numbers.
- */
-
-#define __NR_restart_syscall	  0
-#define __NR_exit		  1
-#define __NR_fork		  2
-#define __NR_read		  3
-#define __NR_write		  4
-#define __NR_open		  5
-#define __NR_close		  6
-#define __NR_waitpid		  7
-#define __NR_creat		  8
-#define __NR_link		  9
-#define __NR_unlink		 10
-#define __NR_execve		 11
-#define __NR_chdir		 12
-#define __NR_time		 13
-#define __NR_mknod		 14
-#define __NR_chmod		 15
-#define __NR_lchown		 16
-#define __NR_break		 17
-#define __NR_oldstat		 18
-#define __NR_lseek		 19
-#define __NR_getpid		 20
-#define __NR_mount		 21
-#define __NR_umount		 22
-#define __NR_setuid		 23
-#define __NR_getuid		 24
-#define __NR_stime		 25
-#define __NR_ptrace		 26
-#define __NR_alarm		 27
-#define __NR_oldfstat		 28
-#define __NR_pause		 29
-#define __NR_utime		 30
-#define __NR_stty		 31
-#define __NR_gtty		 32
-#define __NR_access		 33
-#define __NR_nice		 34
-#define __NR_ftime		 35
-#define __NR_sync		 36
-#define __NR_kill		 37
-#define __NR_rename		 38
-#define __NR_mkdir		 39
-#define __NR_rmdir		 40
-#define __NR_dup		 41
-#define __NR_pipe		 42
-#define __NR_times		 43
-#define __NR_prof		 44
-#define __NR_brk		 45
-#define __NR_setgid		 46
-#define __NR_getgid		 47
-#define __NR_signal		 48
-#define __NR_geteuid		 49
-#define __NR_getegid		 50
-#define __NR_acct		 51
-#define __NR_umount2		 52
-#define __NR_lock		 53
-#define __NR_ioctl		 54
-#define __NR_fcntl		 55
-#define __NR_mpx		 56
-#define __NR_setpgid		 57
-#define __NR_ulimit		 58
-#define __NR_oldolduname	 59
-#define __NR_umask		 60
-#define __NR_chroot		 61
-#define __NR_ustat		 62
-#define __NR_dup2		 63
-#define __NR_getppid		 64
-#define __NR_getpgrp		 65
-#define __NR_setsid		 66
-#define __NR_sigaction		 67
-#define __NR_sgetmask		 68
-#define __NR_ssetmask		 69
-#define __NR_setreuid		 70
-#define __NR_setregid		 71
-#define __NR_sigsuspend		 72
-#define __NR_sigpending		 73
-#define __NR_sethostname	 74
-#define __NR_setrlimit		 75
-#define __NR_getrlimit		 76	/* Back compatible 2Gig limited rlimit */
-#define __NR_getrusage		 77
-#define __NR_gettimeofday	 78
-#define __NR_settimeofday	 79
-#define __NR_getgroups		 80
-#define __NR_setgroups		 81
-#define __NR_select		 82
-#define __NR_symlink		 83
-#define __NR_oldlstat		 84
-#define __NR_readlink		 85
-#define __NR_uselib		 86
-#define __NR_swapon		 87
-#define __NR_reboot		 88
-#define __NR_readdir		 89
-#define __NR_mmap		 90
-#define __NR_munmap		 91
-#define __NR_truncate		 92
-#define __NR_ftruncate		 93
-#define __NR_fchmod		 94
-#define __NR_fchown		 95
-#define __NR_getpriority	 96
-#define __NR_setpriority	 97
-#define __NR_profil		 98
-#define __NR_statfs		 99
-#define __NR_fstatfs		100
-#define __NR_ioperm		101
-#define __NR_socketcall		102
-#define __NR_syslog		103
-#define __NR_setitimer		104
-#define __NR_getitimer		105
-#define __NR_stat		106
-#define __NR_lstat		107
-#define __NR_fstat		108
-#define __NR_olduname		109
-#define __NR_iopl		110
-#define __NR_vhangup		111
-#define __NR_idle		112
-#define __NR_vm86old		113
-#define __NR_wait4		114
-#define __NR_swapoff		115
-#define __NR_sysinfo		116
-#define __NR_ipc		117
-#define __NR_fsync		118
-#define __NR_sigreturn		119
-#define __NR_clone		120
-#define __NR_setdomainname	121
-#define __NR_uname		122
-#define __NR_modify_ldt		123
-#define __NR_adjtimex		124
-#define __NR_mprotect		125
-#define __NR_sigprocmask	126
-#define __NR_create_module	127
-#define __NR_init_module	128
-#define __NR_delete_module	129
-#define __NR_get_kernel_syms	130
-#define __NR_quotactl		131
-#define __NR_getpgid		132
-#define __NR_fchdir		133
-#define __NR_bdflush		134
-#define __NR_sysfs		135
-#define __NR_personality	136
-#define __NR_afs_syscall	137 /* Syscall for Andrew File System */
-#define __NR_setfsuid		138
-#define __NR_setfsgid		139
-#define __NR__llseek		140
-#define __NR_getdents		141
-#define __NR__newselect		142
-#define __NR_flock		143
-#define __NR_msync		144
-#define __NR_readv		145
-#define __NR_writev		146
-#define __NR_getsid		147
-#define __NR_fdatasync		148
-#define __NR__sysctl		149
-#define __NR_mlock		150
-#define __NR_munlock		151
-#define __NR_mlockall		152
-#define __NR_munlockall		153
-#define __NR_sched_setparam		154
-#define __NR_sched_getparam		155
-#define __NR_sched_setscheduler		156
-#define __NR_sched_getscheduler		157
-#define __NR_sched_yield		158
-#define __NR_sched_get_priority_max	159
-#define __NR_sched_get_priority_min	160
-#define __NR_sched_rr_get_interval	161
-#define __NR_nanosleep		162
-#define __NR_mremap		163
-#define __NR_setresuid		164
-#define __NR_getresuid		165
-#define __NR_vm86		166
-#define __NR_query_module	167
-#define __NR_poll		168
-#define __NR_nfsservctl		169
-#define __NR_setresgid		170
-#define __NR_getresgid		171
-#define __NR_prctl              172
-#define __NR_rt_sigreturn	173
-#define __NR_rt_sigaction	174
-#define __NR_rt_sigprocmask	175
-#define __NR_rt_sigpending	176
-#define __NR_rt_sigtimedwait	177
-#define __NR_rt_sigqueueinfo	178
-#define __NR_rt_sigsuspend	179
-#define __NR_pread64		180
-#define __NR_pwrite64		181
-#define __NR_chown		182
-#define __NR_getcwd		183
-#define __NR_capget		184
-#define __NR_capset		185
-#define __NR_sigaltstack	186
-#define __NR_sendfile		187
-#define __NR_streams1		188	/* some people actually want it */
-#define __NR_streams2		189	/* some people actually want it */
-#define __NR_vfork		190
-#define __NR_ugetrlimit		191	/* SuS compliant getrlimit */
-#define __NR_mmap2		192
-#define __NR_truncate64		193
-#define __NR_ftruncate64	194
-#define __NR_stat64		195
-#define __NR_lstat64		196
-#define __NR_fstat64		197
-#define __NR_lchown32		198
-#define __NR_getuid32		199
-#define __NR_getgid32		200
-#define __NR_geteuid32		201
-#define __NR_getegid32		202
-#define __NR_setreuid32		203
-#define __NR_setregid32		204
-#define __NR_getgroups32	205
-#define __NR_setgroups32	206
-#define __NR_fchown32		207
-#define __NR_setresuid32	208
-#define __NR_getresuid32	209
-#define __NR_setresgid32	210
-#define __NR_getresgid32	211
-#define __NR_chown32		212
-#define __NR_setuid32		213
-#define __NR_setgid32		214
-#define __NR_setfsuid32		215
-#define __NR_setfsgid32		216
-#define __NR_pivot_root		217
-#define __NR_mincore		218
-#define __NR_madvise		219
-#define __NR_getdents64		220
-#define __NR_fcntl64		221
-/* 223 is unused */
-#define __NR_gettid		224
-#define __NR_readahead		225
-#define __NR_setxattr		226
-#define __NR_lsetxattr		227
-#define __NR_fsetxattr		228
-#define __NR_getxattr		229
-#define __NR_lgetxattr		230
-#define __NR_fgetxattr		231
-#define __NR_listxattr		232
-#define __NR_llistxattr		233
-#define __NR_flistxattr		234
-#define __NR_removexattr	235
-#define __NR_lremovexattr	236
-#define __NR_fremovexattr	237
-#define __NR_tkill		238
-#define __NR_sendfile64		239
-#define __NR_futex		240
-#define __NR_sched_setaffinity	241
-#define __NR_sched_getaffinity	242
-#define __NR_set_thread_area	243
-#define __NR_get_thread_area	244
-#define __NR_io_setup		245
-#define __NR_io_destroy		246
-#define __NR_io_getevents	247
-#define __NR_io_submit		248
-#define __NR_io_cancel		249
-#define __NR_fadvise64		250
-
-#define __NR_exit_group		252
-#define __NR_lookup_dcookie	253
-#define __NR_epoll_create	254
-#define __NR_epoll_ctl		255
-#define __NR_epoll_wait		256
-#define __NR_remap_file_pages	257
-#define __NR_set_tid_address	258
-#define __NR_timer_create	259
-#define __NR_timer_settime	(__NR_timer_create+1)
-#define __NR_timer_gettime	(__NR_timer_create+2)
-#define __NR_timer_getoverrun	(__NR_timer_create+3)
-#define __NR_timer_delete	(__NR_timer_create+4)
-#define __NR_clock_settime	(__NR_timer_create+5)
-#define __NR_clock_gettime	(__NR_timer_create+6)
-#define __NR_clock_getres	(__NR_timer_create+7)
-#define __NR_clock_nanosleep	(__NR_timer_create+8)
-#define __NR_statfs64		268
-#define __NR_fstatfs64		269
-#define __NR_tgkill		270
-#define __NR_utimes		271
-#define __NR_fadvise64_64	272
-#define __NR_vserver		273
-#define __NR_mbind              274
-#define __NR_get_mempolicy      275
-#define __NR_set_mempolicy      276
-#define __NR_mq_open            277
-#define __NR_mq_unlink          (__NR_mq_open+1)
-#define __NR_mq_timedsend       (__NR_mq_open+2)
-#define __NR_mq_timedreceive    (__NR_mq_open+3)
-#define __NR_mq_notify          (__NR_mq_open+4)
-#define __NR_mq_getsetattr      (__NR_mq_open+5)
-#define __NR_kexec_load		283
-#define __NR_waitid		284
-#define __NR_add_key		285
-#define __NR_request_key	286
-#define __NR_keyctl		287
-#define __NR_ioprio_set		288
-#define __NR_ioprio_get		289
-#define __NR_inotify_init	290
-#define __NR_inotify_add_watch	291
-#define __NR_inotify_rm_watch	292
-/* 293 is unused */
-#define __NR_migrate_pages	294
-#define __NR_openat		295
-#define __NR_mkdirat		296
-#define __NR_mknodat		297
-#define __NR_fchownat		298
-#define __NR_futimesat		299
-#define __NR_fstatat64		300
-#define __NR_unlinkat		301
-#define __NR_renameat		302
-#define __NR_linkat		303
-#define __NR_symlinkat		304
-#define __NR_readlinkat		305
-#define __NR_fchmodat		306
-#define __NR_faccessat		307
-#define __NR_pselect6		308
-#define __NR_ppoll		309
-#define __NR_unshare		310
-#define __NR_set_robust_list	311
-#define __NR_get_robust_list	312
-#define __NR_splice		313
-#define __NR_sync_file_range	314
-#define __NR_tee		315
-#define __NR_vmsplice		316
-#define __NR_move_pages		317
-#define __NR_getcpu		318
-#define __NR_epoll_pwait	319
-#define __NR_utimensat		320
-#define __NR_signalfd		321
-#define __NR_timerfd_create	322
-#define __NR_eventfd		323
-#define __NR_fallocate		324
-#define __NR_timerfd_settime	325
-#define __NR_timerfd_gettime	326
-
-#define NR_syscalls 327
-
-#ifdef __KERNEL__
-
-#define __ARCH_WANT_IPC_PARSE_VERSION
-#define __ARCH_WANT_OLD_READDIR
-#define __ARCH_WANT_OLD_STAT
-#define __ARCH_WANT_STAT64
-#define __ARCH_WANT_SYS_ALARM
-#define __ARCH_WANT_SYS_GETHOSTNAME
-#define __ARCH_WANT_SYS_PAUSE
-#define __ARCH_WANT_SYS_SGETMASK
-#define __ARCH_WANT_SYS_SIGNAL
-#define __ARCH_WANT_SYS_TIME
-#define __ARCH_WANT_SYS_UTIME
-#define __ARCH_WANT_SYS_WAITPID
-#define __ARCH_WANT_SYS_SOCKETCALL
-#define __ARCH_WANT_SYS_FADVISE64
-#define __ARCH_WANT_SYS_GETPGRP
-#define __ARCH_WANT_SYS_LLSEEK
-#define __ARCH_WANT_SYS_NICE
-#define __ARCH_WANT_SYS_OLD_GETRLIMIT
-#define __ARCH_WANT_SYS_OLDUMOUNT
-#define __ARCH_WANT_SYS_SIGPENDING
-#define __ARCH_WANT_SYS_SIGPROCMASK
-#define __ARCH_WANT_SYS_RT_SIGACTION
-#define __ARCH_WANT_SYS_RT_SIGSUSPEND
-
-/*
- * "Conditional" syscalls
- *
- * What we want is __attribute__((weak,alias("sys_ni_syscall"))),
- * but it doesn't work on all toolchains, so we just do it by hand
- */
-#ifndef cond_syscall
-#define cond_syscall(x) asm(".weak\t" #x "\n\t.set\t" #x ",sys_ni_syscall")
-#endif
-
-#endif /* __KERNEL__ */
-#endif /* __ASM_SH_UNISTD_H */
diff --git a/include/asm-sh/unistd_64.h b/include/asm-sh/unistd_64.h
deleted file mode 100644
index 9d21eab52427..000000000000
--- a/include/asm-sh/unistd_64.h
+++ /dev/null
@@ -1,417 +0,0 @@
-#ifndef __ASM_SH_UNISTD_64_H
-#define __ASM_SH_UNISTD_64_H
-
-/*
- * include/asm-sh/unistd_64.h
- *
- * This file contains the system call numbers.
- *
- * Copyright (C) 2000, 2001  Paolo Alberelli
- * Copyright (C) 2003 - 2007 Paul Mundt
- * Copyright (C) 2004  Sean McGoogan
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-#define __NR_restart_syscall	  0
-#define __NR_exit		  1
-#define __NR_fork		  2
-#define __NR_read		  3
-#define __NR_write		  4
-#define __NR_open		  5
-#define __NR_close		  6
-#define __NR_waitpid		  7
-#define __NR_creat		  8
-#define __NR_link		  9
-#define __NR_unlink		 10
-#define __NR_execve		 11
-#define __NR_chdir		 12
-#define __NR_time		 13
-#define __NR_mknod		 14
-#define __NR_chmod		 15
-#define __NR_lchown		 16
-#define __NR_break		 17
-#define __NR_oldstat		 18
-#define __NR_lseek		 19
-#define __NR_getpid		 20
-#define __NR_mount		 21
-#define __NR_umount		 22
-#define __NR_setuid		 23
-#define __NR_getuid		 24
-#define __NR_stime		 25
-#define __NR_ptrace		 26
-#define __NR_alarm		 27
-#define __NR_oldfstat		 28
-#define __NR_pause		 29
-#define __NR_utime		 30
-#define __NR_stty		 31
-#define __NR_gtty		 32
-#define __NR_access		 33
-#define __NR_nice		 34
-#define __NR_ftime		 35
-#define __NR_sync		 36
-#define __NR_kill		 37
-#define __NR_rename		 38
-#define __NR_mkdir		 39
-#define __NR_rmdir		 40
-#define __NR_dup		 41
-#define __NR_pipe		 42
-#define __NR_times		 43
-#define __NR_prof		 44
-#define __NR_brk		 45
-#define __NR_setgid		 46
-#define __NR_getgid		 47
-#define __NR_signal		 48
-#define __NR_geteuid		 49
-#define __NR_getegid		 50
-#define __NR_acct		 51
-#define __NR_umount2		 52
-#define __NR_lock		 53
-#define __NR_ioctl		 54
-#define __NR_fcntl		 55
-#define __NR_mpx		 56
-#define __NR_setpgid		 57
-#define __NR_ulimit		 58
-#define __NR_oldolduname	 59
-#define __NR_umask		 60
-#define __NR_chroot		 61
-#define __NR_ustat		 62
-#define __NR_dup2		 63
-#define __NR_getppid		 64
-#define __NR_getpgrp		 65
-#define __NR_setsid		 66
-#define __NR_sigaction		 67
-#define __NR_sgetmask		 68
-#define __NR_ssetmask		 69
-#define __NR_setreuid		 70
-#define __NR_setregid		 71
-#define __NR_sigsuspend		 72
-#define __NR_sigpending		 73
-#define __NR_sethostname	 74
-#define __NR_setrlimit		 75
-#define __NR_getrlimit		 76	/* Back compatible 2Gig limited rlimit */
-#define __NR_getrusage		 77
-#define __NR_gettimeofday	 78
-#define __NR_settimeofday	 79
-#define __NR_getgroups		 80
-#define __NR_setgroups		 81
-#define __NR_select		 82
-#define __NR_symlink		 83
-#define __NR_oldlstat		 84
-#define __NR_readlink		 85
-#define __NR_uselib		 86
-#define __NR_swapon		 87
-#define __NR_reboot		 88
-#define __NR_readdir		 89
-#define __NR_mmap		 90
-#define __NR_munmap		 91
-#define __NR_truncate		 92
-#define __NR_ftruncate		 93
-#define __NR_fchmod		 94
-#define __NR_fchown		 95
-#define __NR_getpriority	 96
-#define __NR_setpriority	 97
-#define __NR_profil		 98
-#define __NR_statfs		 99
-#define __NR_fstatfs		100
-#define __NR_ioperm		101
-#define __NR_socketcall		102	/* old implementation of socket systemcall */
-#define __NR_syslog		103
-#define __NR_setitimer		104
-#define __NR_getitimer		105
-#define __NR_stat		106
-#define __NR_lstat		107
-#define __NR_fstat		108
-#define __NR_olduname		109
-#define __NR_iopl		110
-#define __NR_vhangup		111
-#define __NR_idle		112
-#define __NR_vm86old		113
-#define __NR_wait4		114
-#define __NR_swapoff		115
-#define __NR_sysinfo		116
-#define __NR_ipc		117
-#define __NR_fsync		118
-#define __NR_sigreturn		119
-#define __NR_clone		120
-#define __NR_setdomainname	121
-#define __NR_uname		122
-#define __NR_modify_ldt		123
-#define __NR_adjtimex		124
-#define __NR_mprotect		125
-#define __NR_sigprocmask	126
-#define __NR_create_module	127
-#define __NR_init_module	128
-#define __NR_delete_module	129
-#define __NR_get_kernel_syms	130
-#define __NR_quotactl		131
-#define __NR_getpgid		132
-#define __NR_fchdir		133
-#define __NR_bdflush		134
-#define __NR_sysfs		135
-#define __NR_personality	136
-#define __NR_afs_syscall	137 /* Syscall for Andrew File System */
-#define __NR_setfsuid		138
-#define __NR_setfsgid		139
-#define __NR__llseek		140
-#define __NR_getdents		141
-#define __NR__newselect		142
-#define __NR_flock		143
-#define __NR_msync		144
-#define __NR_readv		145
-#define __NR_writev		146
-#define __NR_getsid		147
-#define __NR_fdatasync		148
-#define __NR__sysctl		149
-#define __NR_mlock		150
-#define __NR_munlock		151
-#define __NR_mlockall		152
-#define __NR_munlockall		153
-#define __NR_sched_setparam		154
-#define __NR_sched_getparam		155
-#define __NR_sched_setscheduler		156
-#define __NR_sched_getscheduler		157
-#define __NR_sched_yield		158
-#define __NR_sched_get_priority_max	159
-#define __NR_sched_get_priority_min	160
-#define __NR_sched_rr_get_interval	161
-#define __NR_nanosleep		162
-#define __NR_mremap		163
-#define __NR_setresuid		164
-#define __NR_getresuid		165
-#define __NR_vm86		166
-#define __NR_query_module	167
-#define __NR_poll		168
-#define __NR_nfsservctl		169
-#define __NR_setresgid		170
-#define __NR_getresgid		171
-#define __NR_prctl              172
-#define __NR_rt_sigreturn	173
-#define __NR_rt_sigaction	174
-#define __NR_rt_sigprocmask	175
-#define __NR_rt_sigpending	176
-#define __NR_rt_sigtimedwait	177
-#define __NR_rt_sigqueueinfo	178
-#define __NR_rt_sigsuspend	179
-#define __NR_pread64		180
-#define __NR_pwrite64		181
-#define __NR_chown		182
-#define __NR_getcwd		183
-#define __NR_capget		184
-#define __NR_capset		185
-#define __NR_sigaltstack	186
-#define __NR_sendfile		187
-#define __NR_streams1		188	/* some people actually want it */
-#define __NR_streams2		189	/* some people actually want it */
-#define __NR_vfork		190
-#define __NR_ugetrlimit		191	/* SuS compliant getrlimit */
-#define __NR_mmap2		192
-#define __NR_truncate64		193
-#define __NR_ftruncate64	194
-#define __NR_stat64		195
-#define __NR_lstat64		196
-#define __NR_fstat64		197
-#define __NR_lchown32		198
-#define __NR_getuid32		199
-#define __NR_getgid32		200
-#define __NR_geteuid32		201
-#define __NR_getegid32		202
-#define __NR_setreuid32		203
-#define __NR_setregid32		204
-#define __NR_getgroups32	205
-#define __NR_setgroups32	206
-#define __NR_fchown32		207
-#define __NR_setresuid32	208
-#define __NR_getresuid32	209
-#define __NR_setresgid32	210
-#define __NR_getresgid32	211
-#define __NR_chown32		212
-#define __NR_setuid32		213
-#define __NR_setgid32		214
-#define __NR_setfsuid32		215
-#define __NR_setfsgid32		216
-#define __NR_pivot_root		217
-#define __NR_mincore		218
-#define __NR_madvise		219
-
-/* Non-multiplexed socket family */
-#define __NR_socket		220
-#define __NR_bind		221
-#define __NR_connect		222
-#define __NR_listen		223
-#define __NR_accept		224
-#define __NR_getsockname	225
-#define __NR_getpeername	226
-#define __NR_socketpair		227
-#define __NR_send		228
-#define __NR_sendto		229
-#define __NR_recv		230
-#define __NR_recvfrom		231
-#define __NR_shutdown		232
-#define __NR_setsockopt		233
-#define __NR_getsockopt		234
-#define __NR_sendmsg		235
-#define __NR_recvmsg		236
-
-/* Non-multiplexed IPC family */
-#define __NR_semop		237
-#define __NR_semget		238
-#define __NR_semctl		239
-#define __NR_msgsnd		240
-#define __NR_msgrcv		241
-#define __NR_msgget		242
-#define __NR_msgctl		243
-#if 0
-#define __NR_shmatcall		244
-#endif
-#define __NR_shmdt		245
-#define __NR_shmget		246
-#define __NR_shmctl		247
-
-#define __NR_getdents64		248
-#define __NR_fcntl64		249
-/* 223 is unused */
-#define __NR_gettid		252
-#define __NR_readahead		253
-#define __NR_setxattr		254
-#define __NR_lsetxattr		255
-#define __NR_fsetxattr		256
-#define __NR_getxattr		257
-#define __NR_lgetxattr		258
-#define __NR_fgetxattr		269
-#define __NR_listxattr		260
-#define __NR_llistxattr		261
-#define __NR_flistxattr		262
-#define __NR_removexattr	263
-#define __NR_lremovexattr	264
-#define __NR_fremovexattr	265
-#define __NR_tkill		266
-#define __NR_sendfile64		267
-#define __NR_futex		268
-#define __NR_sched_setaffinity	269
-#define __NR_sched_getaffinity	270
-#define __NR_set_thread_area	271
-#define __NR_get_thread_area	272
-#define __NR_io_setup		273
-#define __NR_io_destroy		274
-#define __NR_io_getevents	275
-#define __NR_io_submit		276
-#define __NR_io_cancel		277
-#define __NR_fadvise64		278
-#define __NR_exit_group		280
-
-#define __NR_lookup_dcookie	281
-#define __NR_epoll_create	282
-#define __NR_epoll_ctl		283
-#define __NR_epoll_wait		284
-#define __NR_remap_file_pages	285
-#define __NR_set_tid_address	286
-#define __NR_timer_create	287
-#define __NR_timer_settime	(__NR_timer_create+1)
-#define __NR_timer_gettime	(__NR_timer_create+2)
-#define __NR_timer_getoverrun	(__NR_timer_create+3)
-#define __NR_timer_delete	(__NR_timer_create+4)
-#define __NR_clock_settime	(__NR_timer_create+5)
-#define __NR_clock_gettime	(__NR_timer_create+6)
-#define __NR_clock_getres	(__NR_timer_create+7)
-#define __NR_clock_nanosleep	(__NR_timer_create+8)
-#define __NR_statfs64		296
-#define __NR_fstatfs64		297
-#define __NR_tgkill		298
-#define __NR_utimes		299
-#define __NR_fadvise64_64	300
-#define __NR_vserver		301
-#define __NR_mbind              302
-#define __NR_get_mempolicy      303
-#define __NR_set_mempolicy      304
-#define __NR_mq_open            305
-#define __NR_mq_unlink          (__NR_mq_open+1)
-#define __NR_mq_timedsend       (__NR_mq_open+2)
-#define __NR_mq_timedreceive    (__NR_mq_open+3)
-#define __NR_mq_notify          (__NR_mq_open+4)
-#define __NR_mq_getsetattr      (__NR_mq_open+5)
-#define __NR_kexec_load		311
-#define __NR_waitid		312
-#define __NR_add_key		313
-#define __NR_request_key	314
-#define __NR_keyctl		315
-#define __NR_ioprio_set		316
-#define __NR_ioprio_get		317
-#define __NR_inotify_init	318
-#define __NR_inotify_add_watch	319
-#define __NR_inotify_rm_watch	320
-/* 321 is unused */
-#define __NR_migrate_pages	322
-#define __NR_openat		323
-#define __NR_mkdirat		324
-#define __NR_mknodat		325
-#define __NR_fchownat		326
-#define __NR_futimesat		327
-#define __NR_fstatat64		328
-#define __NR_unlinkat		329
-#define __NR_renameat		330
-#define __NR_linkat		331
-#define __NR_symlinkat		332
-#define __NR_readlinkat		333
-#define __NR_fchmodat		334
-#define __NR_faccessat		335
-#define __NR_pselect6		336
-#define __NR_ppoll		337
-#define __NR_unshare		338
-#define __NR_set_robust_list	339
-#define __NR_get_robust_list	340
-#define __NR_splice		341
-#define __NR_sync_file_range	342
-#define __NR_tee		343
-#define __NR_vmsplice		344
-#define __NR_move_pages		345
-#define __NR_getcpu		346
-#define __NR_epoll_pwait	347
-#define __NR_utimensat		348
-#define __NR_signalfd		349
-#define __NR_timerfd_create	350
-#define __NR_eventfd		351
-#define __NR_fallocate		352
-#define __NR_timerfd_settime	353
-#define __NR_timerfd_gettime	354
-
-#ifdef __KERNEL__
-
-#define NR_syscalls 353
-
-#define __ARCH_WANT_IPC_PARSE_VERSION
-#define __ARCH_WANT_OLD_READDIR
-#define __ARCH_WANT_OLD_STAT
-#define __ARCH_WANT_STAT64
-#define __ARCH_WANT_SYS_ALARM
-#define __ARCH_WANT_SYS_GETHOSTNAME
-#define __ARCH_WANT_SYS_PAUSE
-#define __ARCH_WANT_SYS_SGETMASK
-#define __ARCH_WANT_SYS_SIGNAL
-#define __ARCH_WANT_SYS_TIME
-#define __ARCH_WANT_SYS_UTIME
-#define __ARCH_WANT_SYS_WAITPID
-#define __ARCH_WANT_SYS_SOCKETCALL
-#define __ARCH_WANT_SYS_FADVISE64
-#define __ARCH_WANT_SYS_GETPGRP
-#define __ARCH_WANT_SYS_LLSEEK
-#define __ARCH_WANT_SYS_NICE
-#define __ARCH_WANT_SYS_OLD_GETRLIMIT
-#define __ARCH_WANT_SYS_OLDUMOUNT
-#define __ARCH_WANT_SYS_SIGPENDING
-#define __ARCH_WANT_SYS_SIGPROCMASK
-#define __ARCH_WANT_SYS_RT_SIGACTION
-
-/*
- * "Conditional" syscalls
- *
- * What we want is __attribute__((weak,alias("sys_ni_syscall"))),
- * but it doesn't work on all toolchains, so we just do it by hand
- */
-#ifndef cond_syscall
-#define cond_syscall(x) asm(".weak\t" #x "\n\t.set\t" #x ",sys_ni_syscall")
-#endif
-
-#endif /* __KERNEL__ */
-#endif /* __ASM_SH_UNISTD_64_H */
diff --git a/include/asm-sh/watchdog.h b/include/asm-sh/watchdog.h
deleted file mode 100644
index d19ea62ef8c6..000000000000
--- a/include/asm-sh/watchdog.h
+++ /dev/null
@@ -1,107 +0,0 @@
-/*
- * include/asm-sh/watchdog.h
- *
- * Copyright (C) 2002, 2003 Paul Mundt
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- */
-#ifndef __ASM_SH_WATCHDOG_H
-#define __ASM_SH_WATCHDOG_H
-#ifdef __KERNEL__
-
-#include <linux/types.h>
-#include <asm/cpu/watchdog.h>
-#include <asm/io.h>
-
-/* 
- * See asm/cpu-sh2/watchdog.h for explanation of this stupidity..
- */
-#ifndef WTCNT_R
-#  define WTCNT_R	WTCNT
-#endif
-
-#ifndef WTCSR_R
-#  define WTCSR_R	WTCSR
-#endif
-
-#define WTCNT_HIGH	0x5a
-#define WTCSR_HIGH	0xa5
-
-#define WTCSR_CKS2	0x04
-#define WTCSR_CKS1	0x02
-#define WTCSR_CKS0	0x01
-
-/*
- * CKS0-2 supports a number of clock division ratios. At the time the watchdog
- * is enabled, it defaults to a 41 usec overflow period .. we overload this to
- * something a little more reasonable, and really can't deal with anything
- * lower than WTCSR_CKS_1024, else we drop back into the usec range.
- *
- * Clock Division Ratio         Overflow Period
- * --------------------------------------------
- *     1/32 (initial value)       41 usecs
- *     1/64                       82 usecs
- *     1/128                     164 usecs
- *     1/256                     328 usecs
- *     1/512                     656 usecs
- *     1/1024                   1.31 msecs
- *     1/2048                   2.62 msecs
- *     1/4096                   5.25 msecs
- */
-#define WTCSR_CKS_32	0x00
-#define WTCSR_CKS_64	0x01
-#define WTCSR_CKS_128	0x02
-#define WTCSR_CKS_256	0x03
-#define WTCSR_CKS_512	0x04
-#define WTCSR_CKS_1024	0x05
-#define WTCSR_CKS_2048	0x06
-#define WTCSR_CKS_4096	0x07
-
-/**
- * 	sh_wdt_read_cnt - Read from Counter
- * 	Reads back the WTCNT value.
- */
-static inline __u8 sh_wdt_read_cnt(void)
-{
-	return ctrl_inb(WTCNT_R);
-}
-
-/**
- *	sh_wdt_write_cnt - Write to Counter
- *	@val: Value to write
- *
- *	Writes the given value @val to the lower byte of the timer counter.
- *	The upper byte is set manually on each write.
- */
-static inline void sh_wdt_write_cnt(__u8 val)
-{
-	ctrl_outw((WTCNT_HIGH << 8) | (__u16)val, WTCNT);
-}
-
-/**
- * 	sh_wdt_read_csr - Read from Control/Status Register
- *
- *	Reads back the WTCSR value.
- */
-static inline __u8 sh_wdt_read_csr(void)
-{
-	return ctrl_inb(WTCSR_R);
-}
-
-/**
- * 	sh_wdt_write_csr - Write to Control/Status Register
- * 	@val: Value to write
- *
- * 	Writes the given value @val to the lower byte of the control/status
- * 	register. The upper byte is set manually on each write.
- */
-static inline void sh_wdt_write_csr(__u8 val)
-{
-	ctrl_outw((WTCSR_HIGH << 8) | (__u16)val, WTCSR);
-}
-
-#endif /* __KERNEL__ */
-#endif /* __ASM_SH_WATCHDOG_H */
diff --git a/include/asm-sparc/Kbuild b/include/asm-sparc/Kbuild
deleted file mode 100644
index 6cdaf9d33b38..000000000000
--- a/include/asm-sparc/Kbuild
+++ /dev/null
@@ -1 +0,0 @@
-# dummy file to avoid breaking make headers_install
diff --git a/include/asm-sparc/atomic.h b/include/asm-sparc/atomic.h
deleted file mode 100644
index 66d8166ec1d7..000000000000
--- a/include/asm-sparc/atomic.h
+++ /dev/null
@@ -1,8 +0,0 @@
-#ifndef ___ASM_SPARC_ATOMIC_H
-#define ___ASM_SPARC_ATOMIC_H
-#if defined(__sparc__) && defined(__arch64__)
-#include <asm-sparc/atomic_64.h>
-#else
-#include <asm-sparc/atomic_32.h>
-#endif
-#endif
diff --git a/include/asm-sparc/auxio.h b/include/asm-sparc/auxio.h
deleted file mode 100644
index 24c6f3c0f577..000000000000
--- a/include/asm-sparc/auxio.h
+++ /dev/null
@@ -1,8 +0,0 @@
-#ifndef ___ASM_SPARC_AUXIO_H
-#define ___ASM_SPARC_AUXIO_H
-#if defined(__sparc__) && defined(__arch64__)
-#include <asm-sparc/auxio_64.h>
-#else
-#include <asm-sparc/auxio_32.h>
-#endif
-#endif
diff --git a/include/asm-sparc/bitops.h b/include/asm-sparc/bitops.h
deleted file mode 100644
index 1a2949d0193f..000000000000
--- a/include/asm-sparc/bitops.h
+++ /dev/null
@@ -1,8 +0,0 @@
-#ifndef ___ASM_SPARC_BITOPS_H
-#define ___ASM_SPARC_BITOPS_H
-#if defined(__sparc__) && defined(__arch64__)
-#include <asm-sparc/bitops_64.h>
-#else
-#include <asm-sparc/bitops_32.h>
-#endif
-#endif
diff --git a/include/asm-sparc/bugs.h b/include/asm-sparc/bugs.h
deleted file mode 100644
index 2dfc07bc8e54..000000000000
--- a/include/asm-sparc/bugs.h
+++ /dev/null
@@ -1,24 +0,0 @@
-/* include/asm-sparc/bugs.h:  Sparc probes for various bugs.
- *
- * Copyright (C) 1996, 2007 David S. Miller (davem@davemloft.net)
- */
-
-#ifdef CONFIG_SPARC32
-#include <asm/cpudata.h>
-#endif
-
-#ifdef CONFIG_SPARC64
-#include <asm/sstate.h>
-#endif
-
-extern unsigned long loops_per_jiffy;
-
-static void __init check_bugs(void)
-{
-#if defined(CONFIG_SPARC32) && !defined(CONFIG_SMP)
-	cpu_data(0).udelay_val = loops_per_jiffy;
-#endif
-#ifdef CONFIG_SPARC64
-	sstate_running();
-#endif
-}
diff --git a/include/asm-sparc/cacheflush.h b/include/asm-sparc/cacheflush.h
deleted file mode 100644
index 2b6a37957c2d..000000000000
--- a/include/asm-sparc/cacheflush.h
+++ /dev/null
@@ -1,8 +0,0 @@
-#ifndef ___ASM_SPARC_CACHEFLUSH_H
-#define ___ASM_SPARC_CACHEFLUSH_H
-#if defined(__sparc__) && defined(__arch64__)
-#include <asm-sparc/cacheflush_64.h>
-#else
-#include <asm-sparc/cacheflush_32.h>
-#endif
-#endif
diff --git a/include/asm-sparc/checksum.h b/include/asm-sparc/checksum.h
deleted file mode 100644
index 4e3553d4f6e1..000000000000
--- a/include/asm-sparc/checksum.h
+++ /dev/null
@@ -1,8 +0,0 @@
-#ifndef ___ASM_SPARC_CHECKSUM_H
-#define ___ASM_SPARC_CHECKSUM_H
-#if defined(__sparc__) && defined(__arch64__)
-#include <asm-sparc/checksum_64.h>
-#else
-#include <asm-sparc/checksum_32.h>
-#endif
-#endif
diff --git a/include/asm-sparc/cpudata.h b/include/asm-sparc/cpudata.h
deleted file mode 100644
index b76fac0c8d8f..000000000000
--- a/include/asm-sparc/cpudata.h
+++ /dev/null
@@ -1,8 +0,0 @@
-#ifndef ___ASM_SPARC_CPUDATA_H
-#define ___ASM_SPARC_CPUDATA_H
-#if defined(__sparc__) && defined(__arch64__)
-#include <asm-sparc/cpudata_64.h>
-#else
-#include <asm-sparc/cpudata_32.h>
-#endif
-#endif
diff --git a/include/asm-sparc/current.h b/include/asm-sparc/current.h
deleted file mode 100644
index 8a1d9d6643b0..000000000000
--- a/include/asm-sparc/current.h
+++ /dev/null
@@ -1,34 +0,0 @@
-/* include/asm-sparc/current.h
- *
- * Copyright (C) 1999 IBM Deutschland Entwicklung GmbH, IBM Corporation
- * Copyright (C) 2002 Pete Zaitcev (zaitcev@yahoo.com)
- * Copyright (C) 2007 David S. Miller (davem@davemloft.net)
- *
- *  Derived from "include/asm-s390/current.h" by
- *  Martin Schwidefsky (schwidefsky@de.ibm.com)
- *  Derived from "include/asm-i386/current.h"
-*/
-#ifndef _SPARC_CURRENT_H
-#define _SPARC_CURRENT_H
-
-#include <linux/thread_info.h>
-
-#ifdef CONFIG_SPARC64
-register struct task_struct *current asm("g4");
-#endif
-
-#ifdef CONFIG_SPARC32
-/* We might want to consider using %g4 like sparc64 to shave a few cycles.
- *
- * Two stage process (inline + #define) for type-checking.
- * We also obfuscate get_current() to check if anyone used that by mistake.
- */
-struct task_struct;
-static inline struct task_struct *__get_current(void)
-{
-	return current_thread_info()->task;
-}
-#define current __get_current()
-#endif
-
-#endif /* !(_SPARC_CURRENT_H) */
diff --git a/include/asm-sparc/delay.h b/include/asm-sparc/delay.h
deleted file mode 100644
index 6210a3ce9751..000000000000
--- a/include/asm-sparc/delay.h
+++ /dev/null
@@ -1,8 +0,0 @@
-#ifndef ___ASM_SPARC_DELAY_H
-#define ___ASM_SPARC_DELAY_H
-#if defined(__sparc__) && defined(__arch64__)
-#include <asm-sparc/delay_64.h>
-#else
-#include <asm-sparc/delay_32.h>
-#endif
-#endif
diff --git a/include/asm-sparc/dma-mapping.h b/include/asm-sparc/dma-mapping.h
deleted file mode 100644
index 7483504259ce..000000000000
--- a/include/asm-sparc/dma-mapping.h
+++ /dev/null
@@ -1,8 +0,0 @@
-#ifndef ___ASM_SPARC_DMA_MAPPING_H
-#define ___ASM_SPARC_DMA_MAPPING_H
-#if defined(__sparc__) && defined(__arch64__)
-#include <asm-sparc/dma-mapping_64.h>
-#else
-#include <asm-sparc/dma-mapping_32.h>
-#endif
-#endif
diff --git a/include/asm-sparc/dma.h b/include/asm-sparc/dma.h
deleted file mode 100644
index 8cc69bfaae2a..000000000000
--- a/include/asm-sparc/dma.h
+++ /dev/null
@@ -1,8 +0,0 @@
-#ifndef ___ASM_SPARC_DMA_H
-#define ___ASM_SPARC_DMA_H
-#if defined(__sparc__) && defined(__arch64__)
-#include <asm-sparc/dma_64.h>
-#else
-#include <asm-sparc/dma_32.h>
-#endif
-#endif
diff --git a/include/asm-sparc/ebus.h b/include/asm-sparc/ebus.h
deleted file mode 100644
index a5da2d00cd18..000000000000
--- a/include/asm-sparc/ebus.h
+++ /dev/null
@@ -1,8 +0,0 @@
-#ifndef ___ASM_SPARC_EBUS_H
-#define ___ASM_SPARC_EBUS_H
-#if defined(__sparc__) && defined(__arch64__)
-#include <asm-sparc/ebus_64.h>
-#else
-#include <asm-sparc/ebus_32.h>
-#endif
-#endif
diff --git a/include/asm-sparc/elf.h b/include/asm-sparc/elf.h
deleted file mode 100644
index f035c45d7b5e..000000000000
--- a/include/asm-sparc/elf.h
+++ /dev/null
@@ -1,8 +0,0 @@
-#ifndef ___ASM_SPARC_ELF_H
-#define ___ASM_SPARC_ELF_H
-#if defined(__sparc__) && defined(__arch64__)
-#include <asm-sparc/elf_64.h>
-#else
-#include <asm-sparc/elf_32.h>
-#endif
-#endif
diff --git a/include/asm-sparc/floppy.h b/include/asm-sparc/floppy.h
deleted file mode 100644
index 6c628ba15a8d..000000000000
--- a/include/asm-sparc/floppy.h
+++ /dev/null
@@ -1,8 +0,0 @@
-#ifndef ___ASM_SPARC_FLOPPY_H
-#define ___ASM_SPARC_FLOPPY_H
-#if defined(__sparc__) && defined(__arch64__)
-#include <asm-sparc/floppy_64.h>
-#else
-#include <asm-sparc/floppy_32.h>
-#endif
-#endif
diff --git a/include/asm-sparc/futex.h b/include/asm-sparc/futex.h
deleted file mode 100644
index c6a9f038c531..000000000000
--- a/include/asm-sparc/futex.h
+++ /dev/null
@@ -1,8 +0,0 @@
-#ifndef ___ASM_SPARC_FUTEX_H
-#define ___ASM_SPARC_FUTEX_H
-#if defined(__sparc__) && defined(__arch64__)
-#include <asm-sparc/futex_64.h>
-#else
-#include <asm-sparc/futex_32.h>
-#endif
-#endif
diff --git a/include/asm-sparc/hardirq.h b/include/asm-sparc/hardirq.h
deleted file mode 100644
index 156478773100..000000000000
--- a/include/asm-sparc/hardirq.h
+++ /dev/null
@@ -1,8 +0,0 @@
-#ifndef ___ASM_SPARC_HARDIRQ_H
-#define ___ASM_SPARC_HARDIRQ_H
-#if defined(__sparc__) && defined(__arch64__)
-#include <asm-sparc/hardirq_64.h>
-#else
-#include <asm-sparc/hardirq_32.h>
-#endif
-#endif
diff --git a/include/asm-sparc/head.h b/include/asm-sparc/head.h
deleted file mode 100644
index 14652abdea31..000000000000
--- a/include/asm-sparc/head.h
+++ /dev/null
@@ -1,8 +0,0 @@
-#ifndef ___ASM_SPARC_HEAD_H
-#define ___ASM_SPARC_HEAD_H
-#if defined(__sparc__) && defined(__arch64__)
-#include <asm-sparc/head_64.h>
-#else
-#include <asm-sparc/head_32.h>
-#endif
-#endif
diff --git a/include/asm-sparc/io.h b/include/asm-sparc/io.h
deleted file mode 100644
index fc9024d3dfc3..000000000000
--- a/include/asm-sparc/io.h
+++ /dev/null
@@ -1,8 +0,0 @@
-#ifndef ___ASM_SPARC_IO_H
-#define ___ASM_SPARC_IO_H
-#if defined(__sparc__) && defined(__arch64__)
-#include <asm-sparc/io_64.h>
-#else
-#include <asm-sparc/io_32.h>
-#endif
-#endif
diff --git a/include/asm-sparc/iommu.h b/include/asm-sparc/iommu.h
deleted file mode 100644
index 91b072b0d7a0..000000000000
--- a/include/asm-sparc/iommu.h
+++ /dev/null
@@ -1,8 +0,0 @@
-#ifndef ___ASM_SPARC_IOMMU_H
-#define ___ASM_SPARC_IOMMU_H
-#if defined(__sparc__) && defined(__arch64__)
-#include <asm-sparc/iommu_64.h>
-#else
-#include <asm-sparc/iommu_32.h>
-#endif
-#endif
diff --git a/include/asm-sparc/ipcbuf.h b/include/asm-sparc/ipcbuf.h
deleted file mode 100644
index 037605d986e2..000000000000
--- a/include/asm-sparc/ipcbuf.h
+++ /dev/null
@@ -1,8 +0,0 @@
-#ifndef ___ASM_SPARC_IPCBUF_H
-#define ___ASM_SPARC_IPCBUF_H
-#if defined(__sparc__) && defined(__arch64__)
-#include <asm-sparc/ipcbuf_64.h>
-#else
-#include <asm-sparc/ipcbuf_32.h>
-#endif
-#endif
diff --git a/include/asm-sparc/irq.h b/include/asm-sparc/irq.h
deleted file mode 100644
index 7af6bb4aa09c..000000000000
--- a/include/asm-sparc/irq.h
+++ /dev/null
@@ -1,8 +0,0 @@
-#ifndef ___ASM_SPARC_IRQ_H
-#define ___ASM_SPARC_IRQ_H
-#if defined(__sparc__) && defined(__arch64__)
-#include <asm-sparc/irq_64.h>
-#else
-#include <asm-sparc/irq_32.h>
-#endif
-#endif
diff --git a/include/asm-sparc/irqflags.h b/include/asm-sparc/irqflags.h
deleted file mode 100644
index c6402b187e23..000000000000
--- a/include/asm-sparc/irqflags.h
+++ /dev/null
@@ -1,8 +0,0 @@
-#ifndef ___ASM_SPARC_IRQFLAGS_H
-#define ___ASM_SPARC_IRQFLAGS_H
-#if defined(__sparc__) && defined(__arch64__)
-#include <asm-sparc/irqflags_64.h>
-#else
-#include <asm-sparc/irqflags_32.h>
-#endif
-#endif
diff --git a/include/asm-sparc/irqflags_64.h b/include/asm-sparc/irqflags_64.h
deleted file mode 100644
index 024fc54d0682..000000000000
--- a/include/asm-sparc/irqflags_64.h
+++ /dev/null
@@ -1,89 +0,0 @@
-/*
- * include/asm-sparc64/irqflags.h
- *
- * IRQ flags handling
- *
- * This file gets included from lowlevel asm headers too, to provide
- * wrapped versions of the local_irq_*() APIs, based on the
- * raw_local_irq_*() functions from the lowlevel headers.
- */
-#ifndef _ASM_IRQFLAGS_H
-#define _ASM_IRQFLAGS_H
-
-#ifndef __ASSEMBLY__
-
-static inline unsigned long __raw_local_save_flags(void)
-{
-	unsigned long flags;
-
-	__asm__ __volatile__(
-		"rdpr	%%pil, %0"
-		: "=r" (flags)
-	);
-
-	return flags;
-}
-
-#define raw_local_save_flags(flags) \
-		do { (flags) = __raw_local_save_flags(); } while (0)
-
-static inline void raw_local_irq_restore(unsigned long flags)
-{
-	__asm__ __volatile__(
-		"wrpr	%0, %%pil"
-		: /* no output */
-		: "r" (flags)
-		: "memory"
-	);
-}
-
-static inline void raw_local_irq_disable(void)
-{
-	__asm__ __volatile__(
-		"wrpr	15, %%pil"
-		: /* no outputs */
-		: /* no inputs */
-		: "memory"
-	);
-}
-
-static inline void raw_local_irq_enable(void)
-{
-	__asm__ __volatile__(
-		"wrpr	0, %%pil"
-		: /* no outputs */
-		: /* no inputs */
-		: "memory"
-	);
-}
-
-static inline int raw_irqs_disabled_flags(unsigned long flags)
-{
-	return (flags > 0);
-}
-
-static inline int raw_irqs_disabled(void)
-{
-	unsigned long flags = __raw_local_save_flags();
-
-	return raw_irqs_disabled_flags(flags);
-}
-
-/*
- * For spinlocks, etc:
- */
-static inline unsigned long __raw_local_irq_save(void)
-{
-	unsigned long flags = __raw_local_save_flags();
-
-	raw_local_irq_disable();
-
-	return flags;
-}
-
-#define raw_local_irq_save(flags) \
-		do { (flags) = __raw_local_irq_save(); } while (0)
-
-#endif /* (__ASSEMBLY__) */
-
-#endif /* !(_ASM_IRQFLAGS_H) */
diff --git a/include/asm-sparc/kdebug.h b/include/asm-sparc/kdebug.h
deleted file mode 100644
index fe07d00d0534..000000000000
--- a/include/asm-sparc/kdebug.h
+++ /dev/null
@@ -1,8 +0,0 @@
-#ifndef ___ASM_SPARC_KDEBUG_H
-#define ___ASM_SPARC_KDEBUG_H
-#if defined(__sparc__) && defined(__arch64__)
-#include <asm-sparc/kdebug_64.h>
-#else
-#include <asm-sparc/kdebug_32.h>
-#endif
-#endif
diff --git a/include/asm-sparc/kvm.h b/include/asm-sparc/kvm.h
deleted file mode 100644
index 2e5478da3819..000000000000
--- a/include/asm-sparc/kvm.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef __LINUX_KVM_SPARC_H
-#define __LINUX_KVM_SPARC_H
-
-/* sparc does not support KVM */
-
-#endif
diff --git a/include/asm-sparc/mc146818rtc.h b/include/asm-sparc/mc146818rtc.h
deleted file mode 100644
index 9ab65c21e9e4..000000000000
--- a/include/asm-sparc/mc146818rtc.h
+++ /dev/null
@@ -1,8 +0,0 @@
-#ifndef ___ASM_SPARC_MC146818RTC_H
-#define ___ASM_SPARC_MC146818RTC_H
-#if defined(__sparc__) && defined(__arch64__)
-#include <asm-sparc/mc146818rtc_64.h>
-#else
-#include <asm-sparc/mc146818rtc_32.h>
-#endif
-#endif
diff --git a/include/asm-sparc/mmu.h b/include/asm-sparc/mmu.h
deleted file mode 100644
index ee66bf6dcbd6..000000000000
--- a/include/asm-sparc/mmu.h
+++ /dev/null
@@ -1,8 +0,0 @@
-#ifndef ___ASM_SPARC_MMU_H
-#define ___ASM_SPARC_MMU_H
-#if defined(__sparc__) && defined(__arch64__)
-#include <asm-sparc/mmu_64.h>
-#else
-#include <asm-sparc/mmu_32.h>
-#endif
-#endif
diff --git a/include/asm-sparc/mmu_context.h b/include/asm-sparc/mmu_context.h
deleted file mode 100644
index e14efb9532ff..000000000000
--- a/include/asm-sparc/mmu_context.h
+++ /dev/null
@@ -1,8 +0,0 @@
-#ifndef ___ASM_SPARC_MMU_CONTEXT_H
-#define ___ASM_SPARC_MMU_CONTEXT_H
-#if defined(__sparc__) && defined(__arch64__)
-#include <asm-sparc/mmu_context_64.h>
-#else
-#include <asm-sparc/mmu_context_32.h>
-#endif
-#endif
diff --git a/include/asm-sparc/module.h b/include/asm-sparc/module.h
deleted file mode 100644
index 516138fe681a..000000000000
--- a/include/asm-sparc/module.h
+++ /dev/null
@@ -1,8 +0,0 @@
-#ifndef ___ASM_SPARC_MODULE_H
-#define ___ASM_SPARC_MODULE_H
-#if defined(__sparc__) && defined(__arch64__)
-#include <asm-sparc/module_64.h>
-#else
-#include <asm-sparc/module_32.h>
-#endif
-#endif
diff --git a/include/asm-sparc/mostek.h b/include/asm-sparc/mostek.h
deleted file mode 100644
index 5b9f7fec7ee7..000000000000
--- a/include/asm-sparc/mostek.h
+++ /dev/null
@@ -1,8 +0,0 @@
-#ifndef ___ASM_SPARC_MOSTEK_H
-#define ___ASM_SPARC_MOSTEK_H
-#if defined(__sparc__) && defined(__arch64__)
-#include <asm-sparc/mostek_64.h>
-#else
-#include <asm-sparc/mostek_32.h>
-#endif
-#endif
diff --git a/include/asm-sparc/namei.h b/include/asm-sparc/namei.h
deleted file mode 100644
index eff944b8e321..000000000000
--- a/include/asm-sparc/namei.h
+++ /dev/null
@@ -1,8 +0,0 @@
-#ifndef ___ASM_SPARC_NAMEI_H
-#define ___ASM_SPARC_NAMEI_H
-#if defined(__sparc__) && defined(__arch64__)
-#include <asm-sparc/namei_64.h>
-#else
-#include <asm-sparc/namei_32.h>
-#endif
-#endif
diff --git a/include/asm-sparc/namei_32.h b/include/asm-sparc/namei_32.h
deleted file mode 100644
index 0646102fb020..000000000000
--- a/include/asm-sparc/namei_32.h
+++ /dev/null
@@ -1,13 +0,0 @@
-/*
- * linux/include/asm-sparc/namei.h
- *
- * Routines to handle famous /usr/gnemul/s*.
- * Included from linux/fs/namei.c
- */
-
-#ifndef __SPARC_NAMEI_H
-#define __SPARC_NAMEI_H
-
-#define __emul_prefix() NULL
-
-#endif /* __SPARC_NAMEI_H */
diff --git a/include/asm-sparc/namei_64.h b/include/asm-sparc/namei_64.h
deleted file mode 100644
index cbc1b4c06891..000000000000
--- a/include/asm-sparc/namei_64.h
+++ /dev/null
@@ -1,13 +0,0 @@
-/*
- * linux/include/asm-sparc64/namei.h
- *
- * Routines to handle famous /usr/gnemul/s*.
- * Included from linux/fs/namei.c
- */
-
-#ifndef __SPARC64_NAMEI_H
-#define __SPARC64_NAMEI_H
-
-#define __emul_prefix() NULL
-
-#endif /* __SPARC64_NAMEI_H */
diff --git a/include/asm-sparc/of_device.h b/include/asm-sparc/of_device.h
deleted file mode 100644
index e5f5aedc2293..000000000000
--- a/include/asm-sparc/of_device.h
+++ /dev/null
@@ -1,38 +0,0 @@
-#ifndef _ASM_SPARC_OF_DEVICE_H
-#define _ASM_SPARC_OF_DEVICE_H
-#ifdef __KERNEL__
-
-#include <linux/device.h>
-#include <linux/of.h>
-#include <linux/mod_devicetable.h>
-#include <asm/openprom.h>
-
-/*
- * The of_device is a kind of "base class" that is a superset of
- * struct device for use by devices attached to an OF node and
- * probed using OF properties.
- */
-struct of_device
-{
-	struct device_node		*node;
-	struct device			dev;
-	struct resource			resource[PROMREG_MAX];
-	unsigned int			irqs[PROMINTR_MAX];
-	int				num_irqs;
-
-	void				*sysdata;
-
-	int				slot;
-	int				portid;
-	int				clock_freq;
-};
-
-extern void __iomem *of_ioremap(struct resource *res, unsigned long offset, unsigned long size, char *name);
-extern void of_iounmap(struct resource *res, void __iomem *base, unsigned long size);
-
-/* These are just here during the transition */
-#include <linux/of_device.h>
-#include <linux/of_platform.h>
-
-#endif /* __KERNEL__ */
-#endif /* _ASM_SPARC_OF_DEVICE_H */
diff --git a/include/asm-sparc/of_platform.h b/include/asm-sparc/of_platform.h
deleted file mode 100644
index 851eb84d737e..000000000000
--- a/include/asm-sparc/of_platform.h
+++ /dev/null
@@ -1,8 +0,0 @@
-#ifndef ___ASM_SPARC_OF_PLATFORM_H
-#define ___ASM_SPARC_OF_PLATFORM_H
-#if defined(__sparc__) && defined(__arch64__)
-#include <asm-sparc/of_platform_64.h>
-#else
-#include <asm-sparc/of_platform_32.h>
-#endif
-#endif
diff --git a/include/asm-sparc/of_platform_32.h b/include/asm-sparc/of_platform_32.h
deleted file mode 100644
index 38334351c36b..000000000000
--- a/include/asm-sparc/of_platform_32.h
+++ /dev/null
@@ -1,24 +0,0 @@
-#ifndef _ASM_SPARC_OF_PLATFORM_H
-#define _ASM_SPARC_OF_PLATFORM_H
-/*
- *    Copyright (C) 2006 Benjamin Herrenschmidt, IBM Corp.
- *			 <benh@kernel.crashing.org>
- *    Modified for Sparc by merging parts of asm-sparc/of_device.h
- *		by Stephen Rothwell
- *
- *  This program is free software; you can redistribute it and/or
- *  modify it under the terms of the GNU General Public License
- *  as published by the Free Software Foundation; either version
- *  2 of the License, or (at your option) any later version.
- *
- */
-
-/* This is just here during the transition */
-#include <linux/of_platform.h>
-
-extern struct bus_type ebus_bus_type;
-extern struct bus_type sbus_bus_type;
-
-#define of_bus_type	of_platform_bus_type	/* for compatibility */
-
-#endif	/* _ASM_SPARC_OF_PLATFORM_H */
diff --git a/include/asm-sparc/of_platform_64.h b/include/asm-sparc/of_platform_64.h
deleted file mode 100644
index 78aa032b674c..000000000000
--- a/include/asm-sparc/of_platform_64.h
+++ /dev/null
@@ -1,25 +0,0 @@
-#ifndef _ASM_SPARC64_OF_PLATFORM_H
-#define _ASM_SPARC64_OF_PLATFORM_H
-/*
- *    Copyright (C) 2006 Benjamin Herrenschmidt, IBM Corp.
- *			 <benh@kernel.crashing.org>
- *    Modified for Sparc by merging parts of asm-sparc/of_device.h
- *		by Stephen Rothwell
- *
- *  This program is free software; you can redistribute it and/or
- *  modify it under the terms of the GNU General Public License
- *  as published by the Free Software Foundation; either version
- *  2 of the License, or (at your option) any later version.
- *
- */
-
-/* This is just here during the transition */
-#include <linux/of_platform.h>
-
-extern struct bus_type isa_bus_type;
-extern struct bus_type ebus_bus_type;
-extern struct bus_type sbus_bus_type;
-
-#define of_bus_type	of_platform_bus_type	/* for compatibility */
-
-#endif	/* _ASM_SPARC64_OF_PLATFORM_H */
diff --git a/include/asm-sparc/openprom.h b/include/asm-sparc/openprom.h
deleted file mode 100644
index 8c349f061994..000000000000
--- a/include/asm-sparc/openprom.h
+++ /dev/null
@@ -1,8 +0,0 @@
-#ifndef ___ASM_SPARC_OPENPROM_H
-#define ___ASM_SPARC_OPENPROM_H
-#if defined(__sparc__) && defined(__arch64__)
-#include <asm-sparc/openprom_64.h>
-#else
-#include <asm-sparc/openprom_32.h>
-#endif
-#endif
diff --git a/include/asm-sparc/oplib.h b/include/asm-sparc/oplib.h
deleted file mode 100644
index e88d7c04a292..000000000000
--- a/include/asm-sparc/oplib.h
+++ /dev/null
@@ -1,8 +0,0 @@
-#ifndef ___ASM_SPARC_OPLIB_H
-#define ___ASM_SPARC_OPLIB_H
-#if defined(__sparc__) && defined(__arch64__)
-#include <asm-sparc/oplib_64.h>
-#else
-#include <asm-sparc/oplib_32.h>
-#endif
-#endif
diff --git a/include/asm-sparc/page.h b/include/asm-sparc/page.h
deleted file mode 100644
index f32f49fcf75c..000000000000
--- a/include/asm-sparc/page.h
+++ /dev/null
@@ -1,8 +0,0 @@
-#ifndef ___ASM_SPARC_PAGE_H
-#define ___ASM_SPARC_PAGE_H
-#if defined(__sparc__) && defined(__arch64__)
-#include <asm-sparc/page_64.h>
-#else
-#include <asm-sparc/page_32.h>
-#endif
-#endif
diff --git a/include/asm-sparc/parport.h b/include/asm-sparc/parport.h
deleted file mode 100644
index 7818b2523b8d..000000000000
--- a/include/asm-sparc/parport.h
+++ /dev/null
@@ -1,246 +0,0 @@
-/* parport.h: sparc64 specific parport initialization and dma.
- *
- * Copyright (C) 1999  Eddie C. Dost  (ecd@skynet.be)
- */
-
-#ifndef _ASM_SPARC64_PARPORT_H
-#define _ASM_SPARC64_PARPORT_H 1
-
-#include <asm/ebus.h>
-#include <asm/ns87303.h>
-#include <asm/of_device.h>
-#include <asm/prom.h>
-
-#define PARPORT_PC_MAX_PORTS	PARPORT_MAX
-
-/*
- * While sparc64 doesn't have an ISA DMA API, we provide something that looks
- * close enough to make parport_pc happy
- */
-#define HAS_DMA
-
-static DEFINE_SPINLOCK(dma_spin_lock);
-
-#define claim_dma_lock() \
-({	unsigned long flags; \
-	spin_lock_irqsave(&dma_spin_lock, flags); \
-	flags; \
-})
-
-#define release_dma_lock(__flags) \
-	spin_unlock_irqrestore(&dma_spin_lock, __flags);
-
-static struct sparc_ebus_info {
-	struct ebus_dma_info info;
-	unsigned int addr;
-	unsigned int count;
-	int lock;
-
-	struct parport *port;
-} sparc_ebus_dmas[PARPORT_PC_MAX_PORTS];
-
-static DECLARE_BITMAP(dma_slot_map, PARPORT_PC_MAX_PORTS);
-
-static inline int request_dma(unsigned int dmanr, const char *device_id)
-{
-	if (dmanr >= PARPORT_PC_MAX_PORTS)
-		return -EINVAL;
-	if (xchg(&sparc_ebus_dmas[dmanr].lock, 1) != 0)
-		return -EBUSY;
-	return 0;
-}
-
-static inline void free_dma(unsigned int dmanr)
-{
-	if (dmanr >= PARPORT_PC_MAX_PORTS) {
-		printk(KERN_WARNING "Trying to free DMA%d\n", dmanr);
-		return;
-	}
-	if (xchg(&sparc_ebus_dmas[dmanr].lock, 0) == 0) {
-		printk(KERN_WARNING "Trying to free free DMA%d\n", dmanr);
-		return;
-	}
-}
-
-static inline void enable_dma(unsigned int dmanr)
-{
-	ebus_dma_enable(&sparc_ebus_dmas[dmanr].info, 1);
-
-	if (ebus_dma_request(&sparc_ebus_dmas[dmanr].info,
-			     sparc_ebus_dmas[dmanr].addr,
-			     sparc_ebus_dmas[dmanr].count))
-		BUG();
-}
-
-static inline void disable_dma(unsigned int dmanr)
-{
-	ebus_dma_enable(&sparc_ebus_dmas[dmanr].info, 0);
-}
-
-static inline void clear_dma_ff(unsigned int dmanr)
-{
-	/* nothing */
-}
-
-static inline void set_dma_mode(unsigned int dmanr, char mode)
-{
-	ebus_dma_prepare(&sparc_ebus_dmas[dmanr].info, (mode != DMA_MODE_WRITE));
-}
-
-static inline void set_dma_addr(unsigned int dmanr, unsigned int addr)
-{
-	sparc_ebus_dmas[dmanr].addr = addr;
-}
-
-static inline void set_dma_count(unsigned int dmanr, unsigned int count)
-{
-	sparc_ebus_dmas[dmanr].count = count;
-}
-
-static inline unsigned int get_dma_residue(unsigned int dmanr)
-{
-	return ebus_dma_residue(&sparc_ebus_dmas[dmanr].info);
-}
-
-static int __devinit ecpp_probe(struct of_device *op, const struct of_device_id *match)
-{
-	unsigned long base = op->resource[0].start;
-	unsigned long config = op->resource[1].start;
-	unsigned long d_base = op->resource[2].start;
-	unsigned long d_len;
-	struct device_node *parent;
-	struct parport *p;
-	int slot, err;
-
-	parent = op->node->parent;
-	if (!strcmp(parent->name, "dma")) {
-		p = parport_pc_probe_port(base, base + 0x400,
-					  op->irqs[0], PARPORT_DMA_NOFIFO,
-					  op->dev.parent->parent);
-		if (!p)
-			return -ENOMEM;
-		dev_set_drvdata(&op->dev, p);
-		return 0;
-	}
-
-	for (slot = 0; slot < PARPORT_PC_MAX_PORTS; slot++) {
-		if (!test_and_set_bit(slot, dma_slot_map))
-			break;
-	}
-	err = -ENODEV;
-	if (slot >= PARPORT_PC_MAX_PORTS)
-		goto out_err;
-
-	spin_lock_init(&sparc_ebus_dmas[slot].info.lock);
-
-	d_len = (op->resource[2].end - d_base) + 1UL;
-	sparc_ebus_dmas[slot].info.regs =
-		of_ioremap(&op->resource[2], 0, d_len, "ECPP DMA");
-
-	if (!sparc_ebus_dmas[slot].info.regs)
-		goto out_clear_map;
-
-	sparc_ebus_dmas[slot].info.flags = 0;
-	sparc_ebus_dmas[slot].info.callback = NULL;
-	sparc_ebus_dmas[slot].info.client_cookie = NULL;
-	sparc_ebus_dmas[slot].info.irq = 0xdeadbeef;
-	strcpy(sparc_ebus_dmas[slot].info.name, "parport");
-	if (ebus_dma_register(&sparc_ebus_dmas[slot].info))
-		goto out_unmap_regs;
-
-	ebus_dma_irq_enable(&sparc_ebus_dmas[slot].info, 1);
-
-	/* Configure IRQ to Push Pull, Level Low */
-	/* Enable ECP, set bit 2 of the CTR first */
-	outb(0x04, base + 0x02);
-	ns87303_modify(config, PCR,
-		       PCR_EPP_ENABLE |
-		       PCR_IRQ_ODRAIN,
-		       PCR_ECP_ENABLE |
-		       PCR_ECP_CLK_ENA |
-		       PCR_IRQ_POLAR);
-
-	/* CTR bit 5 controls direction of port */
-	ns87303_modify(config, PTR,
-		       0, PTR_LPT_REG_DIR);
-
-	p = parport_pc_probe_port(base, base + 0x400,
-				  op->irqs[0],
-				  slot,
-				  op->dev.parent);
-	err = -ENOMEM;
-	if (!p)
-		goto out_disable_irq;
-
-	dev_set_drvdata(&op->dev, p);
-
-	return 0;
-
-out_disable_irq:
-	ebus_dma_irq_enable(&sparc_ebus_dmas[slot].info, 0);
-	ebus_dma_unregister(&sparc_ebus_dmas[slot].info);
-
-out_unmap_regs:
-	of_iounmap(&op->resource[2], sparc_ebus_dmas[slot].info.regs, d_len);
-
-out_clear_map:
-	clear_bit(slot, dma_slot_map);
-
-out_err:
-	return err;
-}
-
-static int __devexit ecpp_remove(struct of_device *op)
-{
-	struct parport *p = dev_get_drvdata(&op->dev);
-	int slot = p->dma;
-
-	parport_pc_unregister_port(p);
-
-	if (slot != PARPORT_DMA_NOFIFO) {
-		unsigned long d_base = op->resource[2].start;
-		unsigned long d_len;
-
-		d_len = (op->resource[2].end - d_base) + 1UL;
-
-		ebus_dma_irq_enable(&sparc_ebus_dmas[slot].info, 0);
-		ebus_dma_unregister(&sparc_ebus_dmas[slot].info);
-		of_iounmap(&op->resource[2],
-			   sparc_ebus_dmas[slot].info.regs,
-			   d_len);
-		clear_bit(slot, dma_slot_map);
-	}
-
-	return 0;
-}
-
-static struct of_device_id ecpp_match[] = {
-	{
-		.name = "ecpp",
-	},
-	{
-		.name = "parallel",
-		.compatible = "ecpp",
-	},
-	{
-		.name = "parallel",
-		.compatible = "ns87317-ecpp",
-	},
-	{},
-};
-
-static struct of_platform_driver ecpp_driver = {
-	.name			= "ecpp",
-	.match_table		= ecpp_match,
-	.probe			= ecpp_probe,
-	.remove			= __devexit_p(ecpp_remove),
-};
-
-static int parport_pc_find_nonpci_ports(int autoirq, int autodma)
-{
-	of_register_driver(&ecpp_driver, &of_bus_type);
-
-	return 0;
-}
-
-#endif /* !(_ASM_SPARC64_PARPORT_H */
diff --git a/include/asm-sparc/pci.h b/include/asm-sparc/pci.h
deleted file mode 100644
index b807d52a4809..000000000000
--- a/include/asm-sparc/pci.h
+++ /dev/null
@@ -1,8 +0,0 @@
-#ifndef ___ASM_SPARC_PCI_H
-#define ___ASM_SPARC_PCI_H
-#if defined(__sparc__) && defined(__arch64__)
-#include <asm-sparc/pci_64.h>
-#else
-#include <asm-sparc/pci_32.h>
-#endif
-#endif
diff --git a/include/asm-sparc/percpu.h b/include/asm-sparc/percpu.h
deleted file mode 100644
index d98ed6cf2e36..000000000000
--- a/include/asm-sparc/percpu.h
+++ /dev/null
@@ -1,8 +0,0 @@
-#ifndef ___ASM_SPARC_PERCPU_H
-#define ___ASM_SPARC_PERCPU_H
-#if defined(__sparc__) && defined(__arch64__)
-#include <asm-sparc/percpu_64.h>
-#else
-#include <asm-sparc/percpu_32.h>
-#endif
-#endif
diff --git a/include/asm-sparc/pgalloc.h b/include/asm-sparc/pgalloc.h
deleted file mode 100644
index 7fa02b53d392..000000000000
--- a/include/asm-sparc/pgalloc.h
+++ /dev/null
@@ -1,8 +0,0 @@
-#ifndef ___ASM_SPARC_PGALLOC_H
-#define ___ASM_SPARC_PGALLOC_H
-#if defined(__sparc__) && defined(__arch64__)
-#include <asm-sparc/pgalloc_64.h>
-#else
-#include <asm-sparc/pgalloc_32.h>
-#endif
-#endif
diff --git a/include/asm-sparc/pgtable.h b/include/asm-sparc/pgtable.h
deleted file mode 100644
index 63cdef53bc52..000000000000
--- a/include/asm-sparc/pgtable.h
+++ /dev/null
@@ -1,8 +0,0 @@
-#ifndef ___ASM_SPARC_PGTABLE_H
-#define ___ASM_SPARC_PGTABLE_H
-#if defined(__sparc__) && defined(__arch64__)
-#include <asm-sparc/pgtable_64.h>
-#else
-#include <asm-sparc/pgtable_32.h>
-#endif
-#endif
diff --git a/include/asm-sparc/pgtable_32.h b/include/asm-sparc/pgtable_32.h
deleted file mode 100644
index 781bd4694a1c..000000000000
--- a/include/asm-sparc/pgtable_32.h
+++ /dev/null
@@ -1,480 +0,0 @@
-#ifndef _SPARC_PGTABLE_H
-#define _SPARC_PGTABLE_H
-
-/*  asm-sparc/pgtable.h:  Defines and functions used to work
- *                        with Sparc page tables.
- *
- *  Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
- *  Copyright (C) 1998 Jakub Jelinek (jj@sunsite.mff.cuni.cz)
- */
-
-#ifndef __ASSEMBLY__
-#include <asm-generic/4level-fixup.h>
-
-#include <linux/spinlock.h>
-#include <linux/swap.h>
-#include <asm/types.h>
-#ifdef CONFIG_SUN4
-#include <asm/pgtsun4.h>
-#else
-#include <asm/pgtsun4c.h>
-#endif
-#include <asm/pgtsrmmu.h>
-#include <asm/vac-ops.h>
-#include <asm/oplib.h>
-#include <asm/btfixup.h>
-#include <asm/system.h>
-
-
-struct vm_area_struct;
-struct page;
-
-extern void load_mmu(void);
-extern unsigned long calc_highpages(void);
-
-BTFIXUPDEF_SIMM13(pgdir_shift)
-BTFIXUPDEF_SETHI(pgdir_size)
-BTFIXUPDEF_SETHI(pgdir_mask)
-
-BTFIXUPDEF_SIMM13(ptrs_per_pmd)
-BTFIXUPDEF_SIMM13(ptrs_per_pgd)
-BTFIXUPDEF_SIMM13(user_ptrs_per_pgd)
-
-#define pte_ERROR(e)   __builtin_trap()
-#define pmd_ERROR(e)   __builtin_trap()
-#define pgd_ERROR(e)   __builtin_trap()
-
-BTFIXUPDEF_INT(page_none)
-BTFIXUPDEF_INT(page_copy)
-BTFIXUPDEF_INT(page_readonly)
-BTFIXUPDEF_INT(page_kernel)
-
-#define PMD_SHIFT		SUN4C_PMD_SHIFT
-#define PMD_SIZE        	(1UL << PMD_SHIFT)
-#define PMD_MASK        	(~(PMD_SIZE-1))
-#define PMD_ALIGN(__addr) 	(((__addr) + ~PMD_MASK) & PMD_MASK)
-#define PGDIR_SHIFT     	BTFIXUP_SIMM13(pgdir_shift)
-#define PGDIR_SIZE      	BTFIXUP_SETHI(pgdir_size)
-#define PGDIR_MASK      	BTFIXUP_SETHI(pgdir_mask)
-#define PTRS_PER_PTE    	1024
-#define PTRS_PER_PMD    	BTFIXUP_SIMM13(ptrs_per_pmd)
-#define PTRS_PER_PGD    	BTFIXUP_SIMM13(ptrs_per_pgd)
-#define USER_PTRS_PER_PGD	BTFIXUP_SIMM13(user_ptrs_per_pgd)
-#define FIRST_USER_ADDRESS	0
-#define PTE_SIZE		(PTRS_PER_PTE*4)
-
-#define PAGE_NONE      __pgprot(BTFIXUP_INT(page_none))
-extern pgprot_t PAGE_SHARED;
-#define PAGE_COPY      __pgprot(BTFIXUP_INT(page_copy))
-#define PAGE_READONLY  __pgprot(BTFIXUP_INT(page_readonly))
-
-extern unsigned long page_kernel;
-
-#ifdef MODULE
-#define PAGE_KERNEL	page_kernel
-#else
-#define PAGE_KERNEL    __pgprot(BTFIXUP_INT(page_kernel))
-#endif
-
-/* Top-level page directory */
-extern pgd_t swapper_pg_dir[1024];
-
-extern void paging_init(void);
-
-/* Page table for 0-4MB for everybody, on the Sparc this
- * holds the same as on the i386.
- */
-extern pte_t pg0[1024];
-extern pte_t pg1[1024];
-extern pte_t pg2[1024];
-extern pte_t pg3[1024];
-
-extern unsigned long ptr_in_current_pgd;
-
-/* Here is a trick, since mmap.c need the initializer elements for
- * protection_map[] to be constant at compile time, I set the following
- * to all zeros.  I set it to the real values after I link in the
- * appropriate MMU page table routines at boot time.
- */
-#define __P000  __pgprot(0)
-#define __P001  __pgprot(0)
-#define __P010  __pgprot(0)
-#define __P011  __pgprot(0)
-#define __P100  __pgprot(0)
-#define __P101  __pgprot(0)
-#define __P110  __pgprot(0)
-#define __P111  __pgprot(0)
-
-#define __S000	__pgprot(0)
-#define __S001	__pgprot(0)
-#define __S010	__pgprot(0)
-#define __S011	__pgprot(0)
-#define __S100	__pgprot(0)
-#define __S101	__pgprot(0)
-#define __S110	__pgprot(0)
-#define __S111	__pgprot(0)
-
-extern int num_contexts;
-
-/* First physical page can be anywhere, the following is needed so that
- * va-->pa and vice versa conversions work properly without performance
- * hit for all __pa()/__va() operations.
- */
-extern unsigned long phys_base;
-extern unsigned long pfn_base;
-
-/*
- * BAD_PAGETABLE is used when we need a bogus page-table, while
- * BAD_PAGE is used for a bogus page.
- *
- * ZERO_PAGE is a global shared page that is always zero: used
- * for zero-mapped memory areas etc..
- */
-extern pte_t * __bad_pagetable(void);
-extern pte_t __bad_page(void);
-extern unsigned long empty_zero_page;
-
-#define BAD_PAGETABLE __bad_pagetable()
-#define BAD_PAGE __bad_page()
-#define ZERO_PAGE(vaddr) (virt_to_page(&empty_zero_page))
-
-/*
- */
-BTFIXUPDEF_CALL_CONST(struct page *, pmd_page, pmd_t)
-BTFIXUPDEF_CALL_CONST(unsigned long, pgd_page_vaddr, pgd_t)
-
-#define pmd_page(pmd) BTFIXUP_CALL(pmd_page)(pmd)
-#define pgd_page_vaddr(pgd) BTFIXUP_CALL(pgd_page_vaddr)(pgd)
-
-BTFIXUPDEF_SETHI(none_mask)
-BTFIXUPDEF_CALL_CONST(int, pte_present, pte_t)
-BTFIXUPDEF_CALL(void, pte_clear, pte_t *)
-
-static inline int pte_none(pte_t pte)
-{
-	return !(pte_val(pte) & ~BTFIXUP_SETHI(none_mask));
-}
-
-#define pte_present(pte) BTFIXUP_CALL(pte_present)(pte)
-#define pte_clear(mm,addr,pte) BTFIXUP_CALL(pte_clear)(pte)
-
-BTFIXUPDEF_CALL_CONST(int, pmd_bad, pmd_t)
-BTFIXUPDEF_CALL_CONST(int, pmd_present, pmd_t)
-BTFIXUPDEF_CALL(void, pmd_clear, pmd_t *)
-
-static inline int pmd_none(pmd_t pmd)
-{
-	return !(pmd_val(pmd) & ~BTFIXUP_SETHI(none_mask));
-}
-
-#define pmd_bad(pmd) BTFIXUP_CALL(pmd_bad)(pmd)
-#define pmd_present(pmd) BTFIXUP_CALL(pmd_present)(pmd)
-#define pmd_clear(pmd) BTFIXUP_CALL(pmd_clear)(pmd)
-
-BTFIXUPDEF_CALL_CONST(int, pgd_none, pgd_t)
-BTFIXUPDEF_CALL_CONST(int, pgd_bad, pgd_t)
-BTFIXUPDEF_CALL_CONST(int, pgd_present, pgd_t)
-BTFIXUPDEF_CALL(void, pgd_clear, pgd_t *)
-
-#define pgd_none(pgd) BTFIXUP_CALL(pgd_none)(pgd)
-#define pgd_bad(pgd) BTFIXUP_CALL(pgd_bad)(pgd)
-#define pgd_present(pgd) BTFIXUP_CALL(pgd_present)(pgd)
-#define pgd_clear(pgd) BTFIXUP_CALL(pgd_clear)(pgd)
-
-/*
- * The following only work if pte_present() is true.
- * Undefined behaviour if not..
- */
-BTFIXUPDEF_HALF(pte_writei)
-BTFIXUPDEF_HALF(pte_dirtyi)
-BTFIXUPDEF_HALF(pte_youngi)
-
-static int pte_write(pte_t pte) __attribute_const__;
-static inline int pte_write(pte_t pte)
-{
-	return pte_val(pte) & BTFIXUP_HALF(pte_writei);
-}
-
-static int pte_dirty(pte_t pte) __attribute_const__;
-static inline int pte_dirty(pte_t pte)
-{
-	return pte_val(pte) & BTFIXUP_HALF(pte_dirtyi);
-}
-
-static int pte_young(pte_t pte) __attribute_const__;
-static inline int pte_young(pte_t pte)
-{
-	return pte_val(pte) & BTFIXUP_HALF(pte_youngi);
-}
-
-/*
- * The following only work if pte_present() is not true.
- */
-BTFIXUPDEF_HALF(pte_filei)
-
-static int pte_file(pte_t pte) __attribute_const__;
-static inline int pte_file(pte_t pte)
-{
-	return pte_val(pte) & BTFIXUP_HALF(pte_filei);
-}
-
-static inline int pte_special(pte_t pte)
-{
-	return 0;
-}
-
-/*
- */
-BTFIXUPDEF_HALF(pte_wrprotecti)
-BTFIXUPDEF_HALF(pte_mkcleani)
-BTFIXUPDEF_HALF(pte_mkoldi)
-
-static pte_t pte_wrprotect(pte_t pte) __attribute_const__;
-static inline pte_t pte_wrprotect(pte_t pte)
-{
-	return __pte(pte_val(pte) & ~BTFIXUP_HALF(pte_wrprotecti));
-}
-
-static pte_t pte_mkclean(pte_t pte) __attribute_const__;
-static inline pte_t pte_mkclean(pte_t pte)
-{
-	return __pte(pte_val(pte) & ~BTFIXUP_HALF(pte_mkcleani));
-}
-
-static pte_t pte_mkold(pte_t pte) __attribute_const__;
-static inline pte_t pte_mkold(pte_t pte)
-{
-	return __pte(pte_val(pte) & ~BTFIXUP_HALF(pte_mkoldi));
-}
-
-BTFIXUPDEF_CALL_CONST(pte_t, pte_mkwrite, pte_t)
-BTFIXUPDEF_CALL_CONST(pte_t, pte_mkdirty, pte_t)
-BTFIXUPDEF_CALL_CONST(pte_t, pte_mkyoung, pte_t)
-
-#define pte_mkwrite(pte) BTFIXUP_CALL(pte_mkwrite)(pte)
-#define pte_mkdirty(pte) BTFIXUP_CALL(pte_mkdirty)(pte)
-#define pte_mkyoung(pte) BTFIXUP_CALL(pte_mkyoung)(pte)
-
-#define pte_mkspecial(pte)    (pte)
-
-#define pfn_pte(pfn, prot)		mk_pte(pfn_to_page(pfn), prot)
-
-BTFIXUPDEF_CALL(unsigned long,	 pte_pfn, pte_t)
-#define pte_pfn(pte) BTFIXUP_CALL(pte_pfn)(pte)
-#define pte_page(pte)	pfn_to_page(pte_pfn(pte))
-
-/*
- * Conversion functions: convert a page and protection to a page entry,
- * and a page entry and page directory to the page they refer to.
- */
-BTFIXUPDEF_CALL_CONST(pte_t, mk_pte, struct page *, pgprot_t)
-
-BTFIXUPDEF_CALL_CONST(pte_t, mk_pte_phys, unsigned long, pgprot_t)
-BTFIXUPDEF_CALL_CONST(pte_t, mk_pte_io, unsigned long, pgprot_t, int)
-BTFIXUPDEF_CALL_CONST(pgprot_t, pgprot_noncached, pgprot_t)
-
-#define mk_pte(page,pgprot) BTFIXUP_CALL(mk_pte)(page,pgprot)
-#define mk_pte_phys(page,pgprot) BTFIXUP_CALL(mk_pte_phys)(page,pgprot)
-#define mk_pte_io(page,pgprot,space) BTFIXUP_CALL(mk_pte_io)(page,pgprot,space)
-
-#define pgprot_noncached(pgprot) BTFIXUP_CALL(pgprot_noncached)(pgprot)
-
-BTFIXUPDEF_INT(pte_modify_mask)
-
-static pte_t pte_modify(pte_t pte, pgprot_t newprot) __attribute_const__;
-static inline pte_t pte_modify(pte_t pte, pgprot_t newprot)
-{
-	return __pte((pte_val(pte) & BTFIXUP_INT(pte_modify_mask)) |
-		pgprot_val(newprot));
-}
-
-#define pgd_index(address) ((address) >> PGDIR_SHIFT)
-
-/* to find an entry in a page-table-directory */
-#define pgd_offset(mm, address) ((mm)->pgd + pgd_index(address))
-
-/* to find an entry in a kernel page-table-directory */
-#define pgd_offset_k(address) pgd_offset(&init_mm, address)
-
-/* Find an entry in the second-level page table.. */
-BTFIXUPDEF_CALL(pmd_t *, pmd_offset, pgd_t *, unsigned long)
-#define pmd_offset(dir,addr) BTFIXUP_CALL(pmd_offset)(dir,addr)
-
-/* Find an entry in the third-level page table.. */
-BTFIXUPDEF_CALL(pte_t *, pte_offset_kernel, pmd_t *, unsigned long)
-#define pte_offset_kernel(dir,addr) BTFIXUP_CALL(pte_offset_kernel)(dir,addr)
-
-/*
- * This shortcut works on sun4m (and sun4d) because the nocache area is static,
- * and sun4c is guaranteed to have no highmem anyway.
- */
-#define pte_offset_map(d, a)		pte_offset_kernel(d,a)
-#define pte_offset_map_nested(d, a)	pte_offset_kernel(d,a)
-
-#define pte_unmap(pte)		do{}while(0)
-#define pte_unmap_nested(pte)	do{}while(0)
-
-/* Certain architectures need to do special things when pte's
- * within a page table are directly modified.  Thus, the following
- * hook is made available.
- */
-
-BTFIXUPDEF_CALL(void, set_pte, pte_t *, pte_t)
-
-#define set_pte(ptep,pteval) BTFIXUP_CALL(set_pte)(ptep,pteval)
-#define set_pte_at(mm,addr,ptep,pteval) set_pte(ptep,pteval)
-
-struct seq_file;
-BTFIXUPDEF_CALL(void, mmu_info, struct seq_file *)
-
-#define mmu_info(p) BTFIXUP_CALL(mmu_info)(p)
-
-/* Fault handler stuff... */
-#define FAULT_CODE_PROT     0x1
-#define FAULT_CODE_WRITE    0x2
-#define FAULT_CODE_USER     0x4
-
-BTFIXUPDEF_CALL(void, update_mmu_cache, struct vm_area_struct *, unsigned long, pte_t)
-
-#define update_mmu_cache(vma,addr,pte) BTFIXUP_CALL(update_mmu_cache)(vma,addr,pte)
-
-BTFIXUPDEF_CALL(void, sparc_mapiorange, unsigned int, unsigned long,
-    unsigned long, unsigned int)
-BTFIXUPDEF_CALL(void, sparc_unmapiorange, unsigned long, unsigned int)
-#define sparc_mapiorange(bus,pa,va,len) BTFIXUP_CALL(sparc_mapiorange)(bus,pa,va,len)
-#define sparc_unmapiorange(va,len) BTFIXUP_CALL(sparc_unmapiorange)(va,len)
-
-extern int invalid_segment;
-
-/* Encode and de-code a swap entry */
-BTFIXUPDEF_CALL(unsigned long, __swp_type, swp_entry_t)
-BTFIXUPDEF_CALL(unsigned long, __swp_offset, swp_entry_t)
-BTFIXUPDEF_CALL(swp_entry_t, __swp_entry, unsigned long, unsigned long)
-
-#define __swp_type(__x)			BTFIXUP_CALL(__swp_type)(__x)
-#define __swp_offset(__x)		BTFIXUP_CALL(__swp_offset)(__x)
-#define __swp_entry(__type,__off)	BTFIXUP_CALL(__swp_entry)(__type,__off)
-
-#define __pte_to_swp_entry(pte)		((swp_entry_t) { pte_val(pte) })
-#define __swp_entry_to_pte(x)		((pte_t) { (x).val })
-
-/* file-offset-in-pte helpers */
-BTFIXUPDEF_CALL(unsigned long, pte_to_pgoff, pte_t pte);
-BTFIXUPDEF_CALL(pte_t, pgoff_to_pte, unsigned long pgoff);
-
-#define pte_to_pgoff(pte) BTFIXUP_CALL(pte_to_pgoff)(pte)
-#define pgoff_to_pte(off) BTFIXUP_CALL(pgoff_to_pte)(off)
-
-/*
- * This is made a constant because mm/fremap.c required a constant.
- * Note that layout of these bits is different between sun4c.c and srmmu.c.
- */
-#define PTE_FILE_MAX_BITS 24
-
-/*
- */
-struct ctx_list {
-	struct ctx_list *next;
-	struct ctx_list *prev;
-	unsigned int ctx_number;
-	struct mm_struct *ctx_mm;
-};
-
-extern struct ctx_list *ctx_list_pool;  /* Dynamically allocated */
-extern struct ctx_list ctx_free;        /* Head of free list */
-extern struct ctx_list ctx_used;        /* Head of used contexts list */
-
-#define NO_CONTEXT     -1
-
-static inline void remove_from_ctx_list(struct ctx_list *entry)
-{
-	entry->next->prev = entry->prev;
-	entry->prev->next = entry->next;
-}
-
-static inline void add_to_ctx_list(struct ctx_list *head, struct ctx_list *entry)
-{
-	entry->next = head;
-	(entry->prev = head->prev)->next = entry;
-	head->prev = entry;
-}
-#define add_to_free_ctxlist(entry) add_to_ctx_list(&ctx_free, entry)
-#define add_to_used_ctxlist(entry) add_to_ctx_list(&ctx_used, entry)
-
-static inline unsigned long
-__get_phys (unsigned long addr)
-{
-	switch (sparc_cpu_model){
-	case sun4:
-	case sun4c:
-		return sun4c_get_pte (addr) << PAGE_SHIFT;
-	case sun4m:
-	case sun4d:
-		return ((srmmu_get_pte (addr) & 0xffffff00) << 4);
-	default:
-		return 0;
-	}
-}
-
-static inline int
-__get_iospace (unsigned long addr)
-{
-	switch (sparc_cpu_model){
-	case sun4:
-	case sun4c:
-		return -1; /* Don't check iospace on sun4c */
-	case sun4m:
-	case sun4d:
-		return (srmmu_get_pte (addr) >> 28);
-	default:
-		return -1;
-	}
-}
-
-extern unsigned long *sparc_valid_addr_bitmap;
-
-/* Needs to be defined here and not in linux/mm.h, as it is arch dependent */
-#define kern_addr_valid(addr) \
-	(test_bit(__pa((unsigned long)(addr))>>20, sparc_valid_addr_bitmap))
-
-extern int io_remap_pfn_range(struct vm_area_struct *vma,
-			      unsigned long from, unsigned long pfn,
-			      unsigned long size, pgprot_t prot);
-
-/*
- * For sparc32&64, the pfn in io_remap_pfn_range() carries <iospace> in
- * its high 4 bits.  These macros/functions put it there or get it from there.
- */
-#define MK_IOSPACE_PFN(space, pfn)	(pfn | (space << (BITS_PER_LONG - 4)))
-#define GET_IOSPACE(pfn)		(pfn >> (BITS_PER_LONG - 4))
-#define GET_PFN(pfn)			(pfn & 0x0fffffffUL)
-
-#define __HAVE_ARCH_PTEP_SET_ACCESS_FLAGS
-#define ptep_set_access_flags(__vma, __address, __ptep, __entry, __dirty) \
-({									  \
-	int __changed = !pte_same(*(__ptep), __entry);			  \
-	if (__changed) {						  \
-		set_pte_at((__vma)->vm_mm, (__address), __ptep, __entry); \
-		flush_tlb_page(__vma, __address);			  \
-	}								  \
-	(sparc_cpu_model == sun4c) || __changed;			  \
-})
-
-#include <asm-generic/pgtable.h>
-
-#endif /* !(__ASSEMBLY__) */
-
-#define VMALLOC_START           0xfe600000
-/* XXX Alter this when I get around to fixing sun4c - Anton */
-#define VMALLOC_END             0xffc00000
-
-
-/* We provide our own get_unmapped_area to cope with VA holes for userland */
-#define HAVE_ARCH_UNMAPPED_AREA
-
-/*
- * No page table caches to initialise
- */
-#define pgtable_cache_init()	do { } while (0)
-
-#endif /* !(_SPARC_PGTABLE_H) */
diff --git a/include/asm-sparc/posix_types.h b/include/asm-sparc/posix_types.h
deleted file mode 100644
index 58c820d75e83..000000000000
--- a/include/asm-sparc/posix_types.h
+++ /dev/null
@@ -1,8 +0,0 @@
-#ifndef ___ASM_SPARC_POSIX_TYPES_H
-#define ___ASM_SPARC_POSIX_TYPES_H
-#if defined(__sparc__) && defined(__arch64__)
-#include <asm-sparc/posix_types_64.h>
-#else
-#include <asm-sparc/posix_types_32.h>
-#endif
-#endif
diff --git a/include/asm-sparc/processor.h b/include/asm-sparc/processor.h
deleted file mode 100644
index 11a66bb02eaa..000000000000
--- a/include/asm-sparc/processor.h
+++ /dev/null
@@ -1,8 +0,0 @@
-#ifndef ___ASM_SPARC_PROCESSOR_H
-#define ___ASM_SPARC_PROCESSOR_H
-#if defined(__sparc__) && defined(__arch64__)
-#include <asm-sparc/processor_64.h>
-#else
-#include <asm-sparc/processor_32.h>
-#endif
-#endif
diff --git a/include/asm-sparc/processor_32.h b/include/asm-sparc/processor_32.h
deleted file mode 100644
index 562c0d69c537..000000000000
--- a/include/asm-sparc/processor_32.h
+++ /dev/null
@@ -1,128 +0,0 @@
-/* include/asm-sparc/processor.h
- *
- * Copyright (C) 1994 David S. Miller (davem@caip.rutgers.edu)
- */
-
-#ifndef __ASM_SPARC_PROCESSOR_H
-#define __ASM_SPARC_PROCESSOR_H
-
-/*
- * Sparc32 implementation of macro that returns current
- * instruction pointer ("program counter").
- */
-#define current_text_addr() ({ void *pc; __asm__("sethi %%hi(1f), %0; or %0, %%lo(1f), %0;\n1:" : "=r" (pc)); pc; })
-
-#include <asm/psr.h>
-#include <asm/ptrace.h>
-#include <asm/head.h>
-#include <asm/signal.h>
-#include <asm/btfixup.h>
-#include <asm/page.h>
-
-/*
- * The sparc has no problems with write protection
- */
-#define wp_works_ok 1
-#define wp_works_ok__is_a_macro /* for versions in ksyms.c */
-
-/* Whee, this is STACK_TOP + PAGE_SIZE and the lowest kernel address too...
- * That one page is used to protect kernel from intruders, so that
- * we can make our access_ok test faster
- */
-#define TASK_SIZE	PAGE_OFFSET
-#ifdef __KERNEL__
-#define STACK_TOP	(PAGE_OFFSET - PAGE_SIZE)
-#define STACK_TOP_MAX	STACK_TOP
-#endif /* __KERNEL__ */
-
-struct task_struct;
-
-#ifdef __KERNEL__
-struct fpq {
-	unsigned long *insn_addr;
-	unsigned long insn;
-};
-#endif
-
-typedef struct {
-	int seg;
-} mm_segment_t;
-
-/* The Sparc processor specific thread struct. */
-struct thread_struct {
-	struct pt_regs *kregs;
-	unsigned int _pad1;
-
-	/* Special child fork kpsr/kwim values. */
-	unsigned long fork_kpsr __attribute__ ((aligned (8)));
-	unsigned long fork_kwim;
-
-	/* Floating point regs */
-	unsigned long   float_regs[32] __attribute__ ((aligned (8)));
-	unsigned long   fsr;
-	unsigned long   fpqdepth;
-	struct fpq	fpqueue[16];
-	unsigned long flags;
-	mm_segment_t current_ds;
-};
-
-#define SPARC_FLAG_KTHREAD      0x1    /* task is a kernel thread */
-#define SPARC_FLAG_UNALIGNED    0x2    /* is allowed to do unaligned accesses */
-
-#define INIT_THREAD  { \
-	.flags = SPARC_FLAG_KTHREAD, \
-	.current_ds = KERNEL_DS, \
-}
-
-/* Return saved PC of a blocked thread. */
-extern unsigned long thread_saved_pc(struct task_struct *t);
-
-/* Do necessary setup to start up a newly executed thread. */
-static inline void start_thread(struct pt_regs * regs, unsigned long pc,
-				    unsigned long sp)
-{
-	register unsigned long zero asm("g1");
-
-	regs->psr = (regs->psr & (PSR_CWP)) | PSR_S;
-	regs->pc = ((pc & (~3)) - 4);
-	regs->npc = regs->pc + 4;
-	regs->y = 0;
-	zero = 0;
-	__asm__ __volatile__("std\t%%g0, [%0 + %3 + 0x00]\n\t"
-			     "std\t%%g0, [%0 + %3 + 0x08]\n\t"
-			     "std\t%%g0, [%0 + %3 + 0x10]\n\t"
-			     "std\t%%g0, [%0 + %3 + 0x18]\n\t"
-			     "std\t%%g0, [%0 + %3 + 0x20]\n\t"
-			     "std\t%%g0, [%0 + %3 + 0x28]\n\t"
-			     "std\t%%g0, [%0 + %3 + 0x30]\n\t"
-			     "st\t%1, [%0 + %3 + 0x38]\n\t"
-			     "st\t%%g0, [%0 + %3 + 0x3c]"
-			     : /* no outputs */
-			     : "r" (regs),
-			       "r" (sp - sizeof(struct reg_window)),
-			       "r" (zero),
-			       "i" ((const unsigned long)(&((struct pt_regs *)0)->u_regs[0]))
-			     : "memory");
-}
-
-/* Free all resources held by a thread. */
-#define release_thread(tsk)		do { } while(0)
-extern pid_t kernel_thread(int (*fn)(void *), void * arg, unsigned long flags);
-
-/* Prepare to copy thread state - unlazy all lazy status */
-#define prepare_to_copy(tsk)	do { } while (0)
-
-extern unsigned long get_wchan(struct task_struct *);
-
-#define KSTK_EIP(tsk)  ((tsk)->thread.kregs->pc)
-#define KSTK_ESP(tsk)  ((tsk)->thread.kregs->u_regs[UREG_FP])
-
-#ifdef __KERNEL__
-
-extern struct task_struct *last_task_used_math;
-
-#define cpu_relax()	barrier()
-
-#endif
-
-#endif /* __ASM_SPARC_PROCESSOR_H */
diff --git a/include/asm-sparc/processor_64.h b/include/asm-sparc/processor_64.h
deleted file mode 100644
index 70d42801a0d2..000000000000
--- a/include/asm-sparc/processor_64.h
+++ /dev/null
@@ -1,237 +0,0 @@
-/*
- * include/asm-sparc64/processor.h
- *
- * Copyright (C) 1996 David S. Miller (davem@caip.rutgers.edu)
- */
-
-#ifndef __ASM_SPARC64_PROCESSOR_H
-#define __ASM_SPARC64_PROCESSOR_H
-
-/*
- * Sparc64 implementation of macro that returns current
- * instruction pointer ("program counter").
- */
-#define current_text_addr() ({ void *pc; __asm__("rd %%pc, %0" : "=r" (pc)); pc; })
-
-#include <asm/asi.h>
-#include <asm/pstate.h>
-#include <asm/ptrace.h>
-#include <asm/page.h>
-
-/* The sparc has no problems with write protection */
-#define wp_works_ok 1
-#define wp_works_ok__is_a_macro /* for versions in ksyms.c */
-
-/*
- * User lives in his very own context, and cannot reference us. Note
- * that TASK_SIZE is a misnomer, it really gives maximum user virtual
- * address that the kernel will allocate out.
- *
- * XXX No longer using virtual page tables, kill this upper limit...
- */
-#define VA_BITS		44
-#ifndef __ASSEMBLY__
-#define VPTE_SIZE	(1UL << (VA_BITS - PAGE_SHIFT + 3))
-#else
-#define VPTE_SIZE	(1 << (VA_BITS - PAGE_SHIFT + 3))
-#endif
-
-#define TASK_SIZE	((unsigned long)-VPTE_SIZE)
-#define TASK_SIZE_OF(tsk) \
-	(test_tsk_thread_flag(tsk,TIF_32BIT) ? \
-	 (1UL << 32UL) : TASK_SIZE)
-#ifdef __KERNEL__
-
-#define STACK_TOP32	((1UL << 32UL) - PAGE_SIZE)
-#define STACK_TOP64	(0x0000080000000000UL - (1UL << 32UL))
-
-#define STACK_TOP	(test_thread_flag(TIF_32BIT) ? \
-			 STACK_TOP32 : STACK_TOP64)
-
-#define STACK_TOP_MAX	STACK_TOP64
-
-#endif
-
-#ifndef __ASSEMBLY__
-
-typedef struct {
-	unsigned char seg;
-} mm_segment_t;
-
-/* The Sparc processor specific thread struct. */
-/* XXX This should die, everything can go into thread_info now. */
-struct thread_struct {
-#ifdef CONFIG_DEBUG_SPINLOCK
-	/* How many spinlocks held by this thread.
-	 * Used with spin lock debugging to catch tasks
-	 * sleeping illegally with locks held.
-	 */
-	int smp_lock_count;
-	unsigned int smp_lock_pc;
-#else
-	int dummy; /* f'in gcc bug... */
-#endif
-};
-
-#endif /* !(__ASSEMBLY__) */
-
-#ifndef CONFIG_DEBUG_SPINLOCK
-#define INIT_THREAD  {			\
-	0,				\
-}
-#else /* CONFIG_DEBUG_SPINLOCK */
-#define INIT_THREAD  {					\
-/* smp_lock_count, smp_lock_pc, */			\
-   0,		   0,					\
-}
-#endif /* !(CONFIG_DEBUG_SPINLOCK) */
-
-#ifndef __ASSEMBLY__
-
-#include <linux/types.h>
-
-/* Return saved PC of a blocked thread. */
-struct task_struct;
-extern unsigned long thread_saved_pc(struct task_struct *);
-
-/* On Uniprocessor, even in RMO processes see TSO semantics */
-#ifdef CONFIG_SMP
-#define TSTATE_INITIAL_MM	TSTATE_TSO
-#else
-#define TSTATE_INITIAL_MM	TSTATE_RMO
-#endif
-
-/* Do necessary setup to start up a newly executed thread. */
-#define start_thread(regs, pc, sp) \
-do { \
-	unsigned long __asi = ASI_PNF; \
-	regs->tstate = (regs->tstate & (TSTATE_CWP)) | (TSTATE_INITIAL_MM|TSTATE_IE) | (__asi << 24UL); \
-	regs->tpc = ((pc & (~3)) - 4); \
-	regs->tnpc = regs->tpc + 4; \
-	regs->y = 0; \
-	set_thread_wstate(1 << 3); \
-	if (current_thread_info()->utraps) { \
-		if (*(current_thread_info()->utraps) < 2) \
-			kfree(current_thread_info()->utraps); \
-		else \
-			(*(current_thread_info()->utraps))--; \
-		current_thread_info()->utraps = NULL; \
-	} \
-	__asm__ __volatile__( \
-	"stx		%%g0, [%0 + %2 + 0x00]\n\t" \
-	"stx		%%g0, [%0 + %2 + 0x08]\n\t" \
-	"stx		%%g0, [%0 + %2 + 0x10]\n\t" \
-	"stx		%%g0, [%0 + %2 + 0x18]\n\t" \
-	"stx		%%g0, [%0 + %2 + 0x20]\n\t" \
-	"stx		%%g0, [%0 + %2 + 0x28]\n\t" \
-	"stx		%%g0, [%0 + %2 + 0x30]\n\t" \
-	"stx		%%g0, [%0 + %2 + 0x38]\n\t" \
-	"stx		%%g0, [%0 + %2 + 0x40]\n\t" \
-	"stx		%%g0, [%0 + %2 + 0x48]\n\t" \
-	"stx		%%g0, [%0 + %2 + 0x50]\n\t" \
-	"stx		%%g0, [%0 + %2 + 0x58]\n\t" \
-	"stx		%%g0, [%0 + %2 + 0x60]\n\t" \
-	"stx		%%g0, [%0 + %2 + 0x68]\n\t" \
-	"stx		%1,   [%0 + %2 + 0x70]\n\t" \
-	"stx		%%g0, [%0 + %2 + 0x78]\n\t" \
-	"wrpr		%%g0, (1 << 3), %%wstate\n\t" \
-	: \
-	: "r" (regs), "r" (sp - sizeof(struct reg_window) - STACK_BIAS), \
-	  "i" ((const unsigned long)(&((struct pt_regs *)0)->u_regs[0]))); \
-} while (0)
-
-#define start_thread32(regs, pc, sp) \
-do { \
-	unsigned long __asi = ASI_PNF; \
-	pc &= 0x00000000ffffffffUL; \
-	sp &= 0x00000000ffffffffUL; \
-	regs->tstate = (regs->tstate & (TSTATE_CWP))|(TSTATE_INITIAL_MM|TSTATE_IE|TSTATE_AM) | (__asi << 24UL); \
-	regs->tpc = ((pc & (~3)) - 4); \
-	regs->tnpc = regs->tpc + 4; \
-	regs->y = 0; \
-	set_thread_wstate(2 << 3); \
-	if (current_thread_info()->utraps) { \
-		if (*(current_thread_info()->utraps) < 2) \
-			kfree(current_thread_info()->utraps); \
-		else \
-			(*(current_thread_info()->utraps))--; \
-		current_thread_info()->utraps = NULL; \
-	} \
-	__asm__ __volatile__( \
-	"stx		%%g0, [%0 + %2 + 0x00]\n\t" \
-	"stx		%%g0, [%0 + %2 + 0x08]\n\t" \
-	"stx		%%g0, [%0 + %2 + 0x10]\n\t" \
-	"stx		%%g0, [%0 + %2 + 0x18]\n\t" \
-	"stx		%%g0, [%0 + %2 + 0x20]\n\t" \
-	"stx		%%g0, [%0 + %2 + 0x28]\n\t" \
-	"stx		%%g0, [%0 + %2 + 0x30]\n\t" \
-	"stx		%%g0, [%0 + %2 + 0x38]\n\t" \
-	"stx		%%g0, [%0 + %2 + 0x40]\n\t" \
-	"stx		%%g0, [%0 + %2 + 0x48]\n\t" \
-	"stx		%%g0, [%0 + %2 + 0x50]\n\t" \
-	"stx		%%g0, [%0 + %2 + 0x58]\n\t" \
-	"stx		%%g0, [%0 + %2 + 0x60]\n\t" \
-	"stx		%%g0, [%0 + %2 + 0x68]\n\t" \
-	"stx		%1,   [%0 + %2 + 0x70]\n\t" \
-	"stx		%%g0, [%0 + %2 + 0x78]\n\t" \
-	"wrpr		%%g0, (2 << 3), %%wstate\n\t" \
-	: \
-	: "r" (regs), "r" (sp - sizeof(struct reg_window32)), \
-	  "i" ((const unsigned long)(&((struct pt_regs *)0)->u_regs[0]))); \
-} while (0)
-
-/* Free all resources held by a thread. */
-#define release_thread(tsk)		do { } while (0)
-
-/* Prepare to copy thread state - unlazy all lazy status */
-#define prepare_to_copy(tsk)	do { } while (0)
-
-extern pid_t kernel_thread(int (*fn)(void *), void * arg, unsigned long flags);
-
-extern unsigned long get_wchan(struct task_struct *task);
-
-#define task_pt_regs(tsk) (task_thread_info(tsk)->kregs)
-#define KSTK_EIP(tsk)  (task_pt_regs(tsk)->tpc)
-#define KSTK_ESP(tsk)  (task_pt_regs(tsk)->u_regs[UREG_FP])
-
-#define cpu_relax()	barrier()
-
-/* Prefetch support.  This is tuned for UltraSPARC-III and later.
- * UltraSPARC-I will treat these as nops, and UltraSPARC-II has
- * a shallower prefetch queue than later chips.
- */
-#define ARCH_HAS_PREFETCH
-#define ARCH_HAS_PREFETCHW
-#define ARCH_HAS_SPINLOCK_PREFETCH
-
-static inline void prefetch(const void *x)
-{
-	/* We do not use the read prefetch mnemonic because that
-	 * prefetches into the prefetch-cache which only is accessible
-	 * by floating point operations in UltraSPARC-III and later.
-	 * By contrast, "#one_write" prefetches into the L2 cache
-	 * in shared state.
-	 */
-	__asm__ __volatile__("prefetch [%0], #one_write"
-			     : /* no outputs */
-			     : "r" (x));
-}
-
-static inline void prefetchw(const void *x)
-{
-	/* The most optimal prefetch to use for writes is
-	 * "#n_writes".  This brings the cacheline into the
-	 * L2 cache in "owned" state.
-	 */
-	__asm__ __volatile__("prefetch [%0], #n_writes"
-			     : /* no outputs */
-			     : "r" (x));
-}
-
-#define spin_lock_prefetch(x)	prefetchw(x)
-
-#define HAVE_ARCH_PICK_MMAP_LAYOUT
-
-#endif /* !(__ASSEMBLY__) */
-
-#endif /* !(__ASM_SPARC64_PROCESSOR_H) */
diff --git a/include/asm-sparc/ptrace.h b/include/asm-sparc/ptrace.h
deleted file mode 100644
index f36ab6c30ff3..000000000000
--- a/include/asm-sparc/ptrace.h
+++ /dev/null
@@ -1,8 +0,0 @@
-#ifndef ___ASM_SPARC_PTRACE_H
-#define ___ASM_SPARC_PTRACE_H
-#if defined(__sparc__) && defined(__arch64__)
-#include <asm-sparc/ptrace_64.h>
-#else
-#include <asm-sparc/ptrace_32.h>
-#endif
-#endif
diff --git a/include/asm-sparc/reg.h b/include/asm-sparc/reg.h
deleted file mode 100644
index cb34b0a49aad..000000000000
--- a/include/asm-sparc/reg.h
+++ /dev/null
@@ -1,8 +0,0 @@
-#ifndef ___ASM_SPARC_REG_H
-#define ___ASM_SPARC_REG_H
-#if defined(__sparc__) && defined(__arch64__)
-#include <asm-sparc/reg_64.h>
-#else
-#include <asm-sparc/reg_32.h>
-#endif
-#endif
diff --git a/include/asm-sparc/sbus.h b/include/asm-sparc/sbus.h
deleted file mode 100644
index 8f29a1979665..000000000000
--- a/include/asm-sparc/sbus.h
+++ /dev/null
@@ -1,8 +0,0 @@
-#ifndef ___ASM_SPARC_SBUS_H
-#define ___ASM_SPARC_SBUS_H
-#if defined(__sparc__) && defined(__arch64__)
-#include <asm-sparc/sbus_64.h>
-#else
-#include <asm-sparc/sbus_32.h>
-#endif
-#endif
diff --git a/include/asm-sparc/scatterlist.h b/include/asm-sparc/scatterlist.h
deleted file mode 100644
index b1a0e316c2b6..000000000000
--- a/include/asm-sparc/scatterlist.h
+++ /dev/null
@@ -1,8 +0,0 @@
-#ifndef ___ASM_SPARC_SCATTERLIST_H
-#define ___ASM_SPARC_SCATTERLIST_H
-#if defined(__sparc__) && defined(__arch64__)
-#include <asm-sparc/scatterlist_64.h>
-#else
-#include <asm-sparc/scatterlist_32.h>
-#endif
-#endif
diff --git a/include/asm-sparc/sections.h b/include/asm-sparc/sections.h
deleted file mode 100644
index cbd019162425..000000000000
--- a/include/asm-sparc/sections.h
+++ /dev/null
@@ -1,8 +0,0 @@
-#ifndef ___ASM_SPARC_SECTIONS_H
-#define ___ASM_SPARC_SECTIONS_H
-#if defined(__sparc__) && defined(__arch64__)
-#include <asm-sparc/sections_64.h>
-#else
-#include <asm-sparc/sections_32.h>
-#endif
-#endif
diff --git a/include/asm-sparc/sfp-machine.h b/include/asm-sparc/sfp-machine.h
deleted file mode 100644
index c676fcc2dd27..000000000000
--- a/include/asm-sparc/sfp-machine.h
+++ /dev/null
@@ -1,8 +0,0 @@
-#ifndef ___ASM_SPARC_SFP_MACHINE_H
-#define ___ASM_SPARC_SFP_MACHINE_H
-#if defined(__sparc__) && defined(__arch64__)
-#include <asm-sparc/sfp-machine_64.h>
-#else
-#include <asm-sparc/sfp-machine_32.h>
-#endif
-#endif
diff --git a/include/asm-sparc/shmparam.h b/include/asm-sparc/shmparam.h
deleted file mode 100644
index 16fda7e9acc8..000000000000
--- a/include/asm-sparc/shmparam.h
+++ /dev/null
@@ -1,8 +0,0 @@
-#ifndef ___ASM_SPARC_SHMPARAM_H
-#define ___ASM_SPARC_SHMPARAM_H
-#if defined(__sparc__) && defined(__arch64__)
-#include <asm-sparc/shmparam_64.h>
-#else
-#include <asm-sparc/shmparam_32.h>
-#endif
-#endif
diff --git a/include/asm-sparc/sigcontext.h b/include/asm-sparc/sigcontext.h
deleted file mode 100644
index 82fc7d54a4fa..000000000000
--- a/include/asm-sparc/sigcontext.h
+++ /dev/null
@@ -1,8 +0,0 @@
-#ifndef ___ASM_SPARC_SIGCONTEXT_H
-#define ___ASM_SPARC_SIGCONTEXT_H
-#if defined(__sparc__) && defined(__arch64__)
-#include <asm-sparc/sigcontext_64.h>
-#else
-#include <asm-sparc/sigcontext_32.h>
-#endif
-#endif
diff --git a/include/asm-sparc/siginfo.h b/include/asm-sparc/siginfo.h
deleted file mode 100644
index 2c9fccf4ce18..000000000000
--- a/include/asm-sparc/siginfo.h
+++ /dev/null
@@ -1,8 +0,0 @@
-#ifndef ___ASM_SPARC_SIGINFO_H
-#define ___ASM_SPARC_SIGINFO_H
-#if defined(__sparc__) && defined(__arch64__)
-#include <asm-sparc/siginfo_64.h>
-#else
-#include <asm-sparc/siginfo_32.h>
-#endif
-#endif
diff --git a/include/asm-sparc/signal.h b/include/asm-sparc/signal.h
deleted file mode 100644
index 36f5f9e482f7..000000000000
--- a/include/asm-sparc/signal.h
+++ /dev/null
@@ -1,8 +0,0 @@
-#ifndef ___ASM_SPARC_SIGNAL_H
-#define ___ASM_SPARC_SIGNAL_H
-#if defined(__sparc__) && defined(__arch64__)
-#include <asm-sparc/signal_64.h>
-#else
-#include <asm-sparc/signal_32.h>
-#endif
-#endif
diff --git a/include/asm-sparc/smp.h b/include/asm-sparc/smp.h
deleted file mode 100644
index 1f9dedfbabd8..000000000000
--- a/include/asm-sparc/smp.h
+++ /dev/null
@@ -1,8 +0,0 @@
-#ifndef ___ASM_SPARC_SMP_H
-#define ___ASM_SPARC_SMP_H
-#if defined(__sparc__) && defined(__arch64__)
-#include <asm-sparc/smp_64.h>
-#else
-#include <asm-sparc/smp_32.h>
-#endif
-#endif
diff --git a/include/asm-sparc/spinlock.h b/include/asm-sparc/spinlock.h
deleted file mode 100644
index 3b71c50b72eb..000000000000
--- a/include/asm-sparc/spinlock.h
+++ /dev/null
@@ -1,8 +0,0 @@
-#ifndef ___ASM_SPARC_SPINLOCK_H
-#define ___ASM_SPARC_SPINLOCK_H
-#if defined(__sparc__) && defined(__arch64__)
-#include <asm-sparc/spinlock_64.h>
-#else
-#include <asm-sparc/spinlock_32.h>
-#endif
-#endif
diff --git a/include/asm-sparc/stat.h b/include/asm-sparc/stat.h
deleted file mode 100644
index 9fdcaf8c9cd3..000000000000
--- a/include/asm-sparc/stat.h
+++ /dev/null
@@ -1,8 +0,0 @@
-#ifndef ___ASM_SPARC_STAT_H
-#define ___ASM_SPARC_STAT_H
-#if defined(__sparc__) && defined(__arch64__)
-#include <asm-sparc/stat_64.h>
-#else
-#include <asm-sparc/stat_32.h>
-#endif
-#endif
diff --git a/include/asm-sparc/statfs.h b/include/asm-sparc/statfs.h
deleted file mode 100644
index a70cc52e7018..000000000000
--- a/include/asm-sparc/statfs.h
+++ /dev/null
@@ -1,8 +0,0 @@
-#ifndef ___ASM_SPARC_STATFS_H
-#define ___ASM_SPARC_STATFS_H
-#if defined(__sparc__) && defined(__arch64__)
-#include <asm-sparc/statfs_64.h>
-#else
-#include <asm-sparc/statfs_32.h>
-#endif
-#endif
diff --git a/include/asm-sparc/string.h b/include/asm-sparc/string.h
deleted file mode 100644
index 14c04c7697a5..000000000000
--- a/include/asm-sparc/string.h
+++ /dev/null
@@ -1,8 +0,0 @@
-#ifndef ___ASM_SPARC_STRING_H
-#define ___ASM_SPARC_STRING_H
-#if defined(__sparc__) && defined(__arch64__)
-#include <asm-sparc/string_64.h>
-#else
-#include <asm-sparc/string_32.h>
-#endif
-#endif
diff --git a/include/asm-sparc/sunbpp.h b/include/asm-sparc/sunbpp.h
deleted file mode 100644
index 92ee1a8ff3a2..000000000000
--- a/include/asm-sparc/sunbpp.h
+++ /dev/null
@@ -1,80 +0,0 @@
-/*
- * include/asm-sparc/sunbpp.h
- */
-
-#ifndef _ASM_SPARC_SUNBPP_H
-#define _ASM_SPARC_SUNBPP_H
-
-struct bpp_regs {
-  /* DMA registers */
-  __volatile__ __u32 p_csr;		/* DMA Control/Status Register */
-  __volatile__ __u32 p_addr;		/* Address Register */
-  __volatile__ __u32 p_bcnt;		/* Byte Count Register */
-  __volatile__ __u32 p_tst_csr;		/* Test Control/Status (DMA2 only) */
-  /* Parallel Port registers */
-  __volatile__ __u16 p_hcr;		/* Hardware Configuration Register */
-  __volatile__ __u16 p_ocr;		/* Operation Configuration Register */
-  __volatile__ __u8 p_dr;		/* Parallel Data Register */
-  __volatile__ __u8 p_tcr;		/* Transfer Control Register */
-  __volatile__ __u8 p_or;		/* Output Register */
-  __volatile__ __u8 p_ir;		/* Input Register */
-  __volatile__ __u16 p_icr;		/* Interrupt Control Register */
-};
-
-/* P_HCR. Time is in increments of SBus clock. */
-#define P_HCR_TEST      0x8000      /* Allows buried counters to be read */
-#define P_HCR_DSW       0x7f00      /* Data strobe width (in ticks) */
-#define P_HCR_DDS       0x007f      /* Data setup before strobe (in ticks) */
-
-/* P_OCR. */
-#define P_OCR_MEM_CLR   0x8000
-#define P_OCR_DATA_SRC  0x4000      /* )                  */
-#define P_OCR_DS_DSEL   0x2000      /* )  Bidirectional      */
-#define P_OCR_BUSY_DSEL 0x1000      /* )    selects            */
-#define P_OCR_ACK_DSEL  0x0800      /* )                  */
-#define P_OCR_EN_DIAG   0x0400
-#define P_OCR_BUSY_OP   0x0200      /* Busy operation */
-#define P_OCR_ACK_OP    0x0100      /* Ack operation */
-#define P_OCR_SRST      0x0080      /* Reset state machines. Not selfcleaning. */
-#define P_OCR_IDLE      0x0008      /* PP data transfer state machine is idle */
-#define P_OCR_V_ILCK    0x0002      /* Versatec faded. Zebra only. */
-#define P_OCR_EN_VER    0x0001      /* Enable Versatec (0 - enable). Zebra only. */
-
-/* P_TCR */
-#define P_TCR_DIR       0x08
-#define P_TCR_BUSY      0x04
-#define P_TCR_ACK       0x02
-#define P_TCR_DS        0x01        /* Strobe */
-
-/* P_OR */
-#define P_OR_V3         0x20        /* )                 */
-#define P_OR_V2         0x10        /* ) on Zebra only   */
-#define P_OR_V1         0x08        /* )                 */
-#define P_OR_INIT       0x04
-#define P_OR_AFXN       0x02        /* Auto Feed */
-#define P_OR_SLCT_IN    0x01
-
-/* P_IR */
-#define P_IR_PE         0x04
-#define P_IR_SLCT       0x02
-#define P_IR_ERR        0x01
-
-/* P_ICR */
-#define P_DS_IRQ        0x8000      /* RW1  */
-#define P_ACK_IRQ       0x4000      /* RW1  */
-#define P_BUSY_IRQ      0x2000      /* RW1  */
-#define P_PE_IRQ        0x1000      /* RW1  */
-#define P_SLCT_IRQ      0x0800      /* RW1  */
-#define P_ERR_IRQ       0x0400      /* RW1  */
-#define P_DS_IRQ_EN     0x0200      /* RW   Always on rising edge */
-#define P_ACK_IRQ_EN    0x0100      /* RW   Always on rising edge */
-#define P_BUSY_IRP      0x0080      /* RW   1= rising edge */
-#define P_BUSY_IRQ_EN   0x0040      /* RW   */
-#define P_PE_IRP        0x0020      /* RW   1= rising edge */
-#define P_PE_IRQ_EN     0x0010      /* RW   */
-#define P_SLCT_IRP      0x0008      /* RW   1= rising edge */
-#define P_SLCT_IRQ_EN   0x0004      /* RW   */
-#define P_ERR_IRP       0x0002      /* RW1  1= rising edge */
-#define P_ERR_IRQ_EN    0x0001      /* RW   */
-
-#endif /* !(_ASM_SPARC_SUNBPP_H) */
diff --git a/include/asm-sparc/system.h b/include/asm-sparc/system.h
deleted file mode 100644
index 15e2a3bc4f61..000000000000
--- a/include/asm-sparc/system.h
+++ /dev/null
@@ -1,8 +0,0 @@
-#ifndef ___ASM_SPARC_SYSTEM_H
-#define ___ASM_SPARC_SYSTEM_H
-#if defined(__sparc__) && defined(__arch64__)
-#include <asm-sparc/system_64.h>
-#else
-#include <asm-sparc/system_32.h>
-#endif
-#endif
diff --git a/include/asm-sparc/thread_info.h b/include/asm-sparc/thread_info.h
deleted file mode 100644
index 64155cf89f37..000000000000
--- a/include/asm-sparc/thread_info.h
+++ /dev/null
@@ -1,8 +0,0 @@
-#ifndef ___ASM_SPARC_THREAD_INFO_H
-#define ___ASM_SPARC_THREAD_INFO_H
-#if defined(__sparc__) && defined(__arch64__)
-#include <asm-sparc/thread_info_64.h>
-#else
-#include <asm-sparc/thread_info_32.h>
-#endif
-#endif
diff --git a/include/asm-sparc/timer.h b/include/asm-sparc/timer.h
deleted file mode 100644
index 475baa05a96e..000000000000
--- a/include/asm-sparc/timer.h
+++ /dev/null
@@ -1,8 +0,0 @@
-#ifndef ___ASM_SPARC_TIMER_H
-#define ___ASM_SPARC_TIMER_H
-#if defined(__sparc__) && defined(__arch64__)
-#include <asm-sparc/timer_64.h>
-#else
-#include <asm-sparc/timer_32.h>
-#endif
-#endif
diff --git a/include/asm-sparc/timex.h b/include/asm-sparc/timex.h
deleted file mode 100644
index 01d9f199d452..000000000000
--- a/include/asm-sparc/timex.h
+++ /dev/null
@@ -1,8 +0,0 @@
-#ifndef ___ASM_SPARC_TIMEX_H
-#define ___ASM_SPARC_TIMEX_H
-#if defined(__sparc__) && defined(__arch64__)
-#include <asm-sparc/timex_64.h>
-#else
-#include <asm-sparc/timex_32.h>
-#endif
-#endif
diff --git a/include/asm-sparc/tlb.h b/include/asm-sparc/tlb.h
deleted file mode 100644
index a821057327c4..000000000000
--- a/include/asm-sparc/tlb.h
+++ /dev/null
@@ -1,8 +0,0 @@
-#ifndef ___ASM_SPARC_TLB_H
-#define ___ASM_SPARC_TLB_H
-#if defined(__sparc__) && defined(__arch64__)
-#include <asm-sparc/tlb_64.h>
-#else
-#include <asm-sparc/tlb_32.h>
-#endif
-#endif
diff --git a/include/asm-sparc/tlbflush.h b/include/asm-sparc/tlbflush.h
deleted file mode 100644
index 6e6bc12227b8..000000000000
--- a/include/asm-sparc/tlbflush.h
+++ /dev/null
@@ -1,8 +0,0 @@
-#ifndef ___ASM_SPARC_TLBFLUSH_H
-#define ___ASM_SPARC_TLBFLUSH_H
-#if defined(__sparc__) && defined(__arch64__)
-#include <asm-sparc/tlbflush_64.h>
-#else
-#include <asm-sparc/tlbflush_32.h>
-#endif
-#endif
diff --git a/include/asm-sparc/topology.h b/include/asm-sparc/topology.h
deleted file mode 100644
index ed13630f32e2..000000000000
--- a/include/asm-sparc/topology.h
+++ /dev/null
@@ -1,8 +0,0 @@
-#ifndef ___ASM_SPARC_TOPOLOGY_H
-#define ___ASM_SPARC_TOPOLOGY_H
-#if defined(__sparc__) && defined(__arch64__)
-#include <asm-sparc/topology_64.h>
-#else
-#include <asm-sparc/topology_32.h>
-#endif
-#endif
diff --git a/include/asm-sparc/uaccess.h b/include/asm-sparc/uaccess.h
deleted file mode 100644
index 424facce5238..000000000000
--- a/include/asm-sparc/uaccess.h
+++ /dev/null
@@ -1,8 +0,0 @@
-#ifndef ___ASM_SPARC_UACCESS_H
-#define ___ASM_SPARC_UACCESS_H
-#if defined(__sparc__) && defined(__arch64__)
-#include <asm-sparc/uaccess_64.h>
-#else
-#include <asm-sparc/uaccess_32.h>
-#endif
-#endif
diff --git a/include/asm-sparc/unistd.h b/include/asm-sparc/unistd.h
deleted file mode 100644
index 3c2609618a09..000000000000
--- a/include/asm-sparc/unistd.h
+++ /dev/null
@@ -1,8 +0,0 @@
-#ifndef ___ASM_SPARC_UNISTD_H
-#define ___ASM_SPARC_UNISTD_H
-#if defined(__sparc__) && defined(__arch64__)
-#include <asm-sparc/unistd_64.h>
-#else
-#include <asm-sparc/unistd_32.h>
-#endif
-#endif
diff --git a/include/asm-sparc/unistd_32.h b/include/asm-sparc/unistd_32.h
deleted file mode 100644
index 2338a0276377..000000000000
--- a/include/asm-sparc/unistd_32.h
+++ /dev/null
@@ -1,378 +0,0 @@
-#ifndef _SPARC_UNISTD_H
-#define _SPARC_UNISTD_H
-
-/*
- * System calls under the Sparc.
- *
- * Don't be scared by the ugly clobbers, it is the only way I can
- * think of right now to force the arguments into fixed registers
- * before the trap into the system call with gcc 'asm' statements.
- *
- * Copyright (C) 1995, 2007 David S. Miller (davem@davemloft.net)
- *
- * SunOS compatibility based upon preliminary work which is:
- *
- * Copyright (C) 1995 Adrian M. Rodriguez (adrian@remus.rutgers.edu)
- */
-
-#define __NR_restart_syscall      0 /* Linux Specific				   */
-#define __NR_exit                 1 /* Common                                      */
-#define __NR_fork                 2 /* Common                                      */
-#define __NR_read                 3 /* Common                                      */
-#define __NR_write                4 /* Common                                      */
-#define __NR_open                 5 /* Common                                      */
-#define __NR_close                6 /* Common                                      */
-#define __NR_wait4                7 /* Common                                      */
-#define __NR_creat                8 /* Common                                      */
-#define __NR_link                 9 /* Common                                      */
-#define __NR_unlink              10 /* Common                                      */
-#define __NR_execv               11 /* SunOS Specific                              */
-#define __NR_chdir               12 /* Common                                      */
-#define __NR_chown		 13 /* Common					   */
-#define __NR_mknod               14 /* Common                                      */
-#define __NR_chmod               15 /* Common                                      */
-#define __NR_lchown              16 /* Common                                      */
-#define __NR_brk                 17 /* Common                                      */
-#define __NR_perfctr             18 /* Performance counter operations              */
-#define __NR_lseek               19 /* Common                                      */
-#define __NR_getpid              20 /* Common                                      */
-#define __NR_capget		 21 /* Linux Specific				   */
-#define __NR_capset		 22 /* Linux Specific				   */
-#define __NR_setuid              23 /* Implemented via setreuid in SunOS           */
-#define __NR_getuid              24 /* Common                                      */
-#define __NR_vmsplice	         25 /* ENOSYS under SunOS			   */
-#define __NR_ptrace              26 /* Common                                      */
-#define __NR_alarm               27 /* Implemented via setitimer in SunOS          */
-#define __NR_sigaltstack	 28 /* Common					   */
-#define __NR_pause               29 /* Is sigblock(0)->sigpause() in SunOS         */
-#define __NR_utime               30 /* Implemented via utimes() under SunOS        */
-#define __NR_lchown32            31 /* Linux sparc32 specific                      */
-#define __NR_fchown32            32 /* Linux sparc32 specific                      */
-#define __NR_access              33 /* Common                                      */
-#define __NR_nice                34 /* Implemented via get/setpriority() in SunOS  */
-#define __NR_chown32             35 /* Linux sparc32 specific                      */
-#define __NR_sync                36 /* Common                                      */
-#define __NR_kill                37 /* Common                                      */
-#define __NR_stat                38 /* Common                                      */
-#define __NR_sendfile		 39 /* Linux Specific				   */
-#define __NR_lstat               40 /* Common                                      */
-#define __NR_dup                 41 /* Common                                      */
-#define __NR_pipe                42 /* Common                                      */
-#define __NR_times               43 /* Implemented via getrusage() in SunOS        */
-#define __NR_getuid32            44 /* Linux sparc32 specific                      */
-#define __NR_umount2             45 /* Linux Specific                              */
-#define __NR_setgid              46 /* Implemented via setregid() in SunOS         */
-#define __NR_getgid              47 /* Common                                      */
-#define __NR_signal              48 /* Implemented via sigvec() in SunOS           */
-#define __NR_geteuid             49 /* SunOS calls getuid()                        */
-#define __NR_getegid             50 /* SunOS calls getgid()                        */
-#define __NR_acct                51 /* Common                                      */
-/* #define __NR_memory_ordering  52    Linux sparc64 specific			   */
-#define __NR_getgid32            53 /* Linux sparc32 specific                      */
-#define __NR_ioctl               54 /* Common                                      */
-#define __NR_reboot              55 /* Common                                      */
-#define __NR_mmap2		 56 /* Linux sparc32 Specific			   */
-#define __NR_symlink             57 /* Common                                      */
-#define __NR_readlink            58 /* Common                                      */
-#define __NR_execve              59 /* Common                                      */
-#define __NR_umask               60 /* Common                                      */
-#define __NR_chroot              61 /* Common                                      */
-#define __NR_fstat               62 /* Common                                      */
-#define __NR_fstat64		 63 /* Linux Specific			           */
-#define __NR_getpagesize         64 /* Common                                      */
-#define __NR_msync               65 /* Common in newer 1.3.x revs...               */
-#define __NR_vfork               66 /* Common                                      */
-#define __NR_pread64             67 /* Linux Specific                              */
-#define __NR_pwrite64            68 /* Linux Specific                              */
-#define __NR_geteuid32           69 /* Linux sparc32, sbrk under SunOS             */
-#define __NR_getegid32           70 /* Linux sparc32, sstk under SunOS             */
-#define __NR_mmap                71 /* Common                                      */
-#define __NR_setreuid32          72 /* Linux sparc32, vadvise under SunOS          */
-#define __NR_munmap              73 /* Common                                      */
-#define __NR_mprotect            74 /* Common                                      */
-#define __NR_madvise             75 /* Common                                      */
-#define __NR_vhangup             76 /* Common                                      */
-#define __NR_truncate64		 77 /* Linux sparc32 Specific			   */
-#define __NR_mincore             78 /* Common                                      */
-#define __NR_getgroups           79 /* Common                                      */
-#define __NR_setgroups           80 /* Common                                      */
-#define __NR_getpgrp             81 /* Common                                      */
-#define __NR_setgroups32         82 /* Linux sparc32, setpgrp under SunOS          */
-#define __NR_setitimer           83 /* Common                                      */
-#define __NR_ftruncate64	 84 /* Linux sparc32 Specific			   */
-#define __NR_swapon              85 /* Common                                      */
-#define __NR_getitimer           86 /* Common                                      */
-#define __NR_setuid32            87 /* Linux sparc32, gethostname under SunOS      */
-#define __NR_sethostname         88 /* Common                                      */
-#define __NR_setgid32            89 /* Linux sparc32, getdtablesize under SunOS    */
-#define __NR_dup2                90 /* Common                                      */
-#define __NR_setfsuid32          91 /* Linux sparc32, getdopt under SunOS          */
-#define __NR_fcntl               92 /* Common                                      */
-#define __NR_select              93 /* Common                                      */
-#define __NR_setfsgid32          94 /* Linux sparc32, setdopt under SunOS          */
-#define __NR_fsync               95 /* Common                                      */
-#define __NR_setpriority         96 /* Common                                      */
-#define __NR_socket              97 /* Common                                      */
-#define __NR_connect             98 /* Common                                      */
-#define __NR_accept              99 /* Common                                      */
-#define __NR_getpriority        100 /* Common                                      */
-#define __NR_rt_sigreturn       101 /* Linux Specific                              */
-#define __NR_rt_sigaction       102 /* Linux Specific                              */
-#define __NR_rt_sigprocmask     103 /* Linux Specific                              */
-#define __NR_rt_sigpending      104 /* Linux Specific                              */
-#define __NR_rt_sigtimedwait    105 /* Linux Specific                              */
-#define __NR_rt_sigqueueinfo    106 /* Linux Specific                              */
-#define __NR_rt_sigsuspend      107 /* Linux Specific                              */
-#define __NR_setresuid32        108 /* Linux Specific, sigvec under SunOS	   */
-#define __NR_getresuid32        109 /* Linux Specific, sigblock under SunOS	   */
-#define __NR_setresgid32        110 /* Linux Specific, sigsetmask under SunOS	   */
-#define __NR_getresgid32        111 /* Linux Specific, sigpause under SunOS	   */
-#define __NR_setregid32         112 /* Linux sparc32, sigstack under SunOS         */
-#define __NR_recvmsg            113 /* Common                                      */
-#define __NR_sendmsg            114 /* Common                                      */
-#define __NR_getgroups32        115 /* Linux sparc32, vtrace under SunOS           */
-#define __NR_gettimeofday       116 /* Common                                      */
-#define __NR_getrusage          117 /* Common                                      */
-#define __NR_getsockopt         118 /* Common                                      */
-#define __NR_getcwd		119 /* Linux Specific				   */
-#define __NR_readv              120 /* Common                                      */
-#define __NR_writev             121 /* Common                                      */
-#define __NR_settimeofday       122 /* Common                                      */
-#define __NR_fchown             123 /* Common                                      */
-#define __NR_fchmod             124 /* Common                                      */
-#define __NR_recvfrom           125 /* Common                                      */
-#define __NR_setreuid           126 /* Common                                      */
-#define __NR_setregid           127 /* Common                                      */
-#define __NR_rename             128 /* Common                                      */
-#define __NR_truncate           129 /* Common                                      */
-#define __NR_ftruncate          130 /* Common                                      */
-#define __NR_flock              131 /* Common                                      */
-#define __NR_lstat64		132 /* Linux Specific			           */
-#define __NR_sendto             133 /* Common                                      */
-#define __NR_shutdown           134 /* Common                                      */
-#define __NR_socketpair         135 /* Common                                      */
-#define __NR_mkdir              136 /* Common                                      */
-#define __NR_rmdir              137 /* Common                                      */
-#define __NR_utimes             138 /* SunOS Specific                              */
-#define __NR_stat64		139 /* Linux Specific			           */
-#define __NR_sendfile64         140 /* adjtime under SunOS                         */
-#define __NR_getpeername        141 /* Common                                      */
-#define __NR_futex              142 /* gethostid under SunOS                       */
-#define __NR_gettid             143 /* ENOSYS under SunOS                          */
-#define __NR_getrlimit          144 /* Common                                      */
-#define __NR_setrlimit          145 /* Common                                      */
-#define __NR_pivot_root		146 /* Linux Specific, killpg under SunOS          */
-#define __NR_prctl		147 /* ENOSYS under SunOS                          */
-#define __NR_pciconfig_read	148 /* ENOSYS under SunOS                          */
-#define __NR_pciconfig_write	149 /* ENOSYS under SunOS                          */
-#define __NR_getsockname        150 /* Common                                      */
-#define __NR_inotify_init       151 /* Linux specific                              */
-#define __NR_inotify_add_watch  152 /* Linux specific                              */
-#define __NR_poll               153 /* Common                                      */
-#define __NR_getdents64		154 /* Linux specific				   */
-#define __NR_fcntl64		155 /* Linux sparc32 Specific                      */
-#define __NR_inotify_rm_watch   156 /* Linux specific				   */
-#define __NR_statfs             157 /* Common                                      */
-#define __NR_fstatfs            158 /* Common                                      */
-#define __NR_umount             159 /* Common                                      */
-#define __NR_sched_set_affinity 160 /* Linux specific, async_daemon under SunOS    */
-#define __NR_sched_get_affinity 161 /* Linux specific, getfh under SunOS           */
-#define __NR_getdomainname      162 /* SunOS Specific                              */
-#define __NR_setdomainname      163 /* Common                                      */
-/* #define __NR_utrap_install   164    Linux sparc64 specific			   */
-#define __NR_quotactl           165 /* Common                                      */
-#define __NR_set_tid_address    166 /* Linux specific, exportfs under SunOS        */
-#define __NR_mount              167 /* Common                                      */
-#define __NR_ustat              168 /* Common                                      */
-#define __NR_setxattr           169 /* SunOS: semsys                               */
-#define __NR_lsetxattr          170 /* SunOS: msgsys                               */
-#define __NR_fsetxattr          171 /* SunOS: shmsys                               */
-#define __NR_getxattr           172 /* SunOS: auditsys                             */
-#define __NR_lgetxattr          173 /* SunOS: rfssys                               */
-#define __NR_getdents           174 /* Common                                      */
-#define __NR_setsid             175 /* Common                                      */
-#define __NR_fchdir             176 /* Common                                      */
-#define __NR_fgetxattr          177 /* SunOS: fchroot                              */
-#define __NR_listxattr          178 /* SunOS: vpixsys                              */
-#define __NR_llistxattr         179 /* SunOS: aioread                              */
-#define __NR_flistxattr         180 /* SunOS: aiowrite                             */
-#define __NR_removexattr        181 /* SunOS: aiowait                              */
-#define __NR_lremovexattr       182 /* SunOS: aiocancel                            */
-#define __NR_sigpending         183 /* Common                                      */
-#define __NR_query_module	184 /* Linux Specific				   */
-#define __NR_setpgid            185 /* Common                                      */
-#define __NR_fremovexattr       186 /* SunOS: pathconf                             */
-#define __NR_tkill              187 /* SunOS: fpathconf                            */
-#define __NR_exit_group		188 /* Linux specific, sysconf undef SunOS         */
-#define __NR_uname              189 /* Linux Specific                              */
-#define __NR_init_module        190 /* Linux Specific                              */
-#define __NR_personality        191 /* Linux Specific                              */
-#define __NR_remap_file_pages   192 /* Linux Specific                              */
-#define __NR_epoll_create       193 /* Linux Specific                              */
-#define __NR_epoll_ctl          194 /* Linux Specific                              */
-#define __NR_epoll_wait         195 /* Linux Specific                              */
-#define __NR_ioprio_set         196 /* Linux Specific                              */
-#define __NR_getppid            197 /* Linux Specific                              */
-#define __NR_sigaction          198 /* Linux Specific                              */
-#define __NR_sgetmask           199 /* Linux Specific                              */
-#define __NR_ssetmask           200 /* Linux Specific                              */
-#define __NR_sigsuspend         201 /* Linux Specific                              */
-#define __NR_oldlstat           202 /* Linux Specific                              */
-#define __NR_uselib             203 /* Linux Specific                              */
-#define __NR_readdir            204 /* Linux Specific                              */
-#define __NR_readahead          205 /* Linux Specific                              */
-#define __NR_socketcall         206 /* Linux Specific                              */
-#define __NR_syslog             207 /* Linux Specific                              */
-#define __NR_lookup_dcookie     208 /* Linux Specific                              */
-#define __NR_fadvise64          209 /* Linux Specific                              */
-#define __NR_fadvise64_64       210 /* Linux Specific                              */
-#define __NR_tgkill             211 /* Linux Specific                              */
-#define __NR_waitpid            212 /* Linux Specific                              */
-#define __NR_swapoff            213 /* Linux Specific                              */
-#define __NR_sysinfo            214 /* Linux Specific                              */
-#define __NR_ipc                215 /* Linux Specific                              */
-#define __NR_sigreturn          216 /* Linux Specific                              */
-#define __NR_clone              217 /* Linux Specific                              */
-#define __NR_ioprio_get         218 /* Linux Specific                              */
-#define __NR_adjtimex           219 /* Linux Specific                              */
-#define __NR_sigprocmask        220 /* Linux Specific                              */
-#define __NR_create_module      221 /* Linux Specific                              */
-#define __NR_delete_module      222 /* Linux Specific                              */
-#define __NR_get_kernel_syms    223 /* Linux Specific                              */
-#define __NR_getpgid            224 /* Linux Specific                              */
-#define __NR_bdflush            225 /* Linux Specific                              */
-#define __NR_sysfs              226 /* Linux Specific                              */
-#define __NR_afs_syscall        227 /* Linux Specific                              */
-#define __NR_setfsuid           228 /* Linux Specific                              */
-#define __NR_setfsgid           229 /* Linux Specific                              */
-#define __NR__newselect         230 /* Linux Specific                              */
-#define __NR_time               231 /* Linux Specific                              */
-#define __NR_splice             232 /* Linux Specific                              */
-#define __NR_stime              233 /* Linux Specific                              */
-#define __NR_statfs64           234 /* Linux Specific                              */
-#define __NR_fstatfs64          235 /* Linux Specific                              */
-#define __NR__llseek            236 /* Linux Specific                              */
-#define __NR_mlock              237
-#define __NR_munlock            238
-#define __NR_mlockall           239
-#define __NR_munlockall         240
-#define __NR_sched_setparam     241
-#define __NR_sched_getparam     242
-#define __NR_sched_setscheduler 243
-#define __NR_sched_getscheduler 244
-#define __NR_sched_yield        245
-#define __NR_sched_get_priority_max 246
-#define __NR_sched_get_priority_min 247
-#define __NR_sched_rr_get_interval  248
-#define __NR_nanosleep          249
-#define __NR_mremap             250
-#define __NR__sysctl            251
-#define __NR_getsid             252
-#define __NR_fdatasync          253
-#define __NR_nfsservctl         254
-#define __NR_sync_file_range	255
-#define __NR_clock_settime	256
-#define __NR_clock_gettime	257
-#define __NR_clock_getres	258
-#define __NR_clock_nanosleep	259
-#define __NR_sched_getaffinity	260
-#define __NR_sched_setaffinity	261
-#define __NR_timer_settime	262
-#define __NR_timer_gettime	263
-#define __NR_timer_getoverrun	264
-#define __NR_timer_delete	265
-#define __NR_timer_create	266
-/* #define __NR_vserver		267 Reserved for VSERVER */
-#define __NR_io_setup		268
-#define __NR_io_destroy		269
-#define __NR_io_submit		270
-#define __NR_io_cancel		271
-#define __NR_io_getevents	272
-#define __NR_mq_open		273
-#define __NR_mq_unlink		274
-#define __NR_mq_timedsend	275
-#define __NR_mq_timedreceive	276
-#define __NR_mq_notify		277
-#define __NR_mq_getsetattr	278
-#define __NR_waitid		279
-#define __NR_tee		280
-#define __NR_add_key		281
-#define __NR_request_key	282
-#define __NR_keyctl		283
-#define __NR_openat		284
-#define __NR_mkdirat		285
-#define __NR_mknodat		286
-#define __NR_fchownat		287
-#define __NR_futimesat		288
-#define __NR_fstatat64		289
-#define __NR_unlinkat		290
-#define __NR_renameat		291
-#define __NR_linkat		292
-#define __NR_symlinkat		293
-#define __NR_readlinkat		294
-#define __NR_fchmodat		295
-#define __NR_faccessat		296
-#define __NR_pselect6		297
-#define __NR_ppoll		298
-#define __NR_unshare		299
-#define __NR_set_robust_list	300
-#define __NR_get_robust_list	301
-#define __NR_migrate_pages	302
-#define __NR_mbind		303
-#define __NR_get_mempolicy	304
-#define __NR_set_mempolicy	305
-#define __NR_kexec_load		306
-#define __NR_move_pages		307
-#define __NR_getcpu		308
-#define __NR_epoll_pwait	309
-#define __NR_utimensat		310
-#define __NR_signalfd		311
-#define __NR_timerfd_create	312
-#define __NR_eventfd		313
-#define __NR_fallocate		314
-#define __NR_timerfd_settime	315
-#define __NR_timerfd_gettime	316
-
-#define NR_SYSCALLS		317
-
-/* Sparc 32-bit only has the "setresuid32", "getresuid32" variants,
- * it never had the plain ones and there is no value to adding those
- * old versions into the syscall table.
- */
-#define __IGNORE_setresuid
-#define __IGNORE_getresuid
-#define __IGNORE_setresgid
-#define __IGNORE_getresgid
-
-#ifdef __KERNEL__
-#define __ARCH_WANT_IPC_PARSE_VERSION
-#define __ARCH_WANT_OLD_READDIR
-#define __ARCH_WANT_STAT64
-#define __ARCH_WANT_SYS_ALARM
-#define __ARCH_WANT_SYS_GETHOSTNAME
-#define __ARCH_WANT_SYS_PAUSE
-#define __ARCH_WANT_SYS_SGETMASK
-#define __ARCH_WANT_SYS_SIGNAL
-#define __ARCH_WANT_SYS_TIME
-#define __ARCH_WANT_SYS_UTIME
-#define __ARCH_WANT_SYS_WAITPID
-#define __ARCH_WANT_SYS_SOCKETCALL
-#define __ARCH_WANT_SYS_FADVISE64
-#define __ARCH_WANT_SYS_GETPGRP
-#define __ARCH_WANT_SYS_LLSEEK
-#define __ARCH_WANT_SYS_NICE
-#define __ARCH_WANT_SYS_OLDUMOUNT
-#define __ARCH_WANT_SYS_SIGPENDING
-#define __ARCH_WANT_SYS_SIGPROCMASK
-#define __ARCH_WANT_SYS_RT_SIGSUSPEND
-
-/*
- * "Conditional" syscalls
- *
- * What we want is __attribute__((weak,alias("sys_ni_syscall"))),
- * but it doesn't work on all toolchains, so we just do it by hand
- */
-#define cond_syscall(x) asm(".weak\t" #x "\n\t.set\t" #x ",sys_ni_syscall")
-
-#endif /* __KERNEL__ */
-#endif /* _SPARC_UNISTD_H */
diff --git a/include/asm-sparc/unistd_64.h b/include/asm-sparc/unistd_64.h
deleted file mode 100644
index 13be4453a1f0..000000000000
--- a/include/asm-sparc/unistd_64.h
+++ /dev/null
@@ -1,373 +0,0 @@
-#ifndef _SPARC64_UNISTD_H
-#define _SPARC64_UNISTD_H
-
-/*
- * System calls under the Sparc.
- *
- * Don't be scared by the ugly clobbers, it is the only way I can
- * think of right now to force the arguments into fixed registers
- * before the trap into the system call with gcc 'asm' statements.
- *
- * Copyright (C) 1995, 2007 David S. Miller (davem@davemloft.net)
- *
- * SunOS compatibility based upon preliminary work which is:
- *
- * Copyright (C) 1995 Adrian M. Rodriguez (adrian@remus.rutgers.edu)
- */
-
-#define __NR_restart_syscall      0 /* Linux Specific				   */
-#define __NR_exit                 1 /* Common                                      */
-#define __NR_fork                 2 /* Common                                      */
-#define __NR_read                 3 /* Common                                      */
-#define __NR_write                4 /* Common                                      */
-#define __NR_open                 5 /* Common                                      */
-#define __NR_close                6 /* Common                                      */
-#define __NR_wait4                7 /* Common                                      */
-#define __NR_creat                8 /* Common                                      */
-#define __NR_link                 9 /* Common                                      */
-#define __NR_unlink              10 /* Common                                      */
-#define __NR_execv               11 /* SunOS Specific                              */
-#define __NR_chdir               12 /* Common                                      */
-#define __NR_chown		 13 /* Common					   */
-#define __NR_mknod               14 /* Common                                      */
-#define __NR_chmod               15 /* Common                                      */
-#define __NR_lchown              16 /* Common                                      */
-#define __NR_brk                 17 /* Common                                      */
-#define __NR_perfctr             18 /* Performance counter operations              */
-#define __NR_lseek               19 /* Common                                      */
-#define __NR_getpid              20 /* Common                                      */
-#define __NR_capget		 21 /* Linux Specific				   */
-#define __NR_capset		 22 /* Linux Specific				   */
-#define __NR_setuid              23 /* Implemented via setreuid in SunOS           */
-#define __NR_getuid              24 /* Common                                      */
-#define __NR_vmsplice	         25 /* ENOSYS under SunOS			   */
-#define __NR_ptrace              26 /* Common                                      */
-#define __NR_alarm               27 /* Implemented via setitimer in SunOS          */
-#define __NR_sigaltstack	 28 /* Common					   */
-#define __NR_pause               29 /* Is sigblock(0)->sigpause() in SunOS         */
-#define __NR_utime               30 /* Implemented via utimes() under SunOS        */
-/* #define __NR_lchown32         31    Linux sparc32 specific                      */
-/* #define __NR_fchown32         32    Linux sparc32 specific                      */
-#define __NR_access              33 /* Common                                      */
-#define __NR_nice                34 /* Implemented via get/setpriority() in SunOS  */
-/* #define __NR_chown32          35    Linux sparc32 specific                      */
-#define __NR_sync                36 /* Common                                      */
-#define __NR_kill                37 /* Common                                      */
-#define __NR_stat                38 /* Common                                      */
-#define __NR_sendfile		 39 /* Linux Specific				   */
-#define __NR_lstat               40 /* Common                                      */
-#define __NR_dup                 41 /* Common                                      */
-#define __NR_pipe                42 /* Common                                      */
-#define __NR_times               43 /* Implemented via getrusage() in SunOS        */
-/* #define __NR_getuid32         44    Linux sparc32 specific                      */
-#define __NR_umount2             45 /* Linux Specific                              */
-#define __NR_setgid              46 /* Implemented via setregid() in SunOS         */
-#define __NR_getgid              47 /* Common                                      */
-#define __NR_signal              48 /* Implemented via sigvec() in SunOS           */
-#define __NR_geteuid             49 /* SunOS calls getuid()                        */
-#define __NR_getegid             50 /* SunOS calls getgid()                        */
-#define __NR_acct                51 /* Common                                      */
-#define __NR_memory_ordering	 52 /* Linux Specific				   */
-/* #define __NR_getgid32         53    Linux sparc32 specific                      */
-#define __NR_ioctl               54 /* Common                                      */
-#define __NR_reboot              55 /* Common                                      */
-/* #define __NR_mmap2		 56    Linux sparc32 Specific                      */
-#define __NR_symlink             57 /* Common                                      */
-#define __NR_readlink            58 /* Common                                      */
-#define __NR_execve              59 /* Common                                      */
-#define __NR_umask               60 /* Common                                      */
-#define __NR_chroot              61 /* Common                                      */
-#define __NR_fstat               62 /* Common                                      */
-#define __NR_fstat64             63 /* Linux Specific                              */
-#define __NR_getpagesize         64 /* Common                                      */
-#define __NR_msync               65 /* Common in newer 1.3.x revs...               */
-#define __NR_vfork               66 /* Common                                      */
-#define __NR_pread64             67 /* Linux Specific                              */
-#define __NR_pwrite64            68 /* Linux Specific                              */
-/* #define __NR_geteuid32        69    Linux sparc32, sbrk under SunOS             */
-/* #define __NR_getegid32        70    Linux sparc32, sstk under SunOS             */
-#define __NR_mmap                71 /* Common                                      */
-/* #define __NR_setreuid32       72    Linux sparc32, vadvise under SunOS          */
-#define __NR_munmap              73 /* Common                                      */
-#define __NR_mprotect            74 /* Common                                      */
-#define __NR_madvise             75 /* Common                                      */
-#define __NR_vhangup             76 /* Common                                      */
-/* #define __NR_truncate64       77    Linux sparc32 Specific			   */
-#define __NR_mincore             78 /* Common                                      */
-#define __NR_getgroups           79 /* Common                                      */
-#define __NR_setgroups           80 /* Common                                      */
-#define __NR_getpgrp             81 /* Common                                      */
-/* #define __NR_setgroups32      82    Linux sparc32, setpgrp under SunOS          */
-#define __NR_setitimer           83 /* Common                                      */
-/* #define __NR_ftruncate64      84    Linux sparc32 Specific			   */
-#define __NR_swapon              85 /* Common                                      */
-#define __NR_getitimer           86 /* Common                                      */
-/* #define __NR_setuid32         87    Linux sparc32, gethostname under SunOS      */
-#define __NR_sethostname         88 /* Common                                      */
-/* #define __NR_setgid32         89    Linux sparc32, getdtablesize under SunOS    */
-#define __NR_dup2                90 /* Common                                      */
-/* #define __NR_setfsuid32       91    Linux sparc32, getdopt under SunOS          */
-#define __NR_fcntl               92 /* Common                                      */
-#define __NR_select              93 /* Common                                      */
-/* #define __NR_setfsgid32       94    Linux sparc32, setdopt under SunOS          */
-#define __NR_fsync               95 /* Common                                      */
-#define __NR_setpriority         96 /* Common                                      */
-#define __NR_socket              97 /* Common                                      */
-#define __NR_connect             98 /* Common                                      */
-#define __NR_accept              99 /* Common                                      */
-#define __NR_getpriority        100 /* Common                                      */
-#define __NR_rt_sigreturn       101 /* Linux Specific                              */
-#define __NR_rt_sigaction       102 /* Linux Specific                              */
-#define __NR_rt_sigprocmask     103 /* Linux Specific                              */
-#define __NR_rt_sigpending      104 /* Linux Specific                              */
-#define __NR_rt_sigtimedwait    105 /* Linux Specific                              */
-#define __NR_rt_sigqueueinfo    106 /* Linux Specific                              */
-#define __NR_rt_sigsuspend      107 /* Linux Specific                              */
-#define __NR_setresuid          108 /* Linux Specific, sigvec under SunOS	   */
-#define __NR_getresuid          109 /* Linux Specific, sigblock under SunOS	   */
-#define __NR_setresgid          110 /* Linux Specific, sigsetmask under SunOS	   */
-#define __NR_getresgid          111 /* Linux Specific, sigpause under SunOS	   */
-/* #define __NR_setregid32       75    Linux sparc32, sigstack under SunOS         */
-#define __NR_recvmsg            113 /* Common                                      */
-#define __NR_sendmsg            114 /* Common                                      */
-/* #define __NR_getgroups32     115    Linux sparc32, vtrace under SunOS           */
-#define __NR_gettimeofday       116 /* Common                                      */
-#define __NR_getrusage          117 /* Common                                      */
-#define __NR_getsockopt         118 /* Common                                      */
-#define __NR_getcwd		119 /* Linux Specific				   */
-#define __NR_readv              120 /* Common                                      */
-#define __NR_writev             121 /* Common                                      */
-#define __NR_settimeofday       122 /* Common                                      */
-#define __NR_fchown             123 /* Common                                      */
-#define __NR_fchmod             124 /* Common                                      */
-#define __NR_recvfrom           125 /* Common                                      */
-#define __NR_setreuid           126 /* Common                                      */
-#define __NR_setregid           127 /* Common                                      */
-#define __NR_rename             128 /* Common                                      */
-#define __NR_truncate           129 /* Common                                      */
-#define __NR_ftruncate          130 /* Common                                      */
-#define __NR_flock              131 /* Common                                      */
-#define __NR_lstat64		132 /* Linux Specific                              */
-#define __NR_sendto             133 /* Common                                      */
-#define __NR_shutdown           134 /* Common                                      */
-#define __NR_socketpair         135 /* Common                                      */
-#define __NR_mkdir              136 /* Common                                      */
-#define __NR_rmdir              137 /* Common                                      */
-#define __NR_utimes             138 /* SunOS Specific                              */
-#define __NR_stat64		139 /* Linux Specific			           */
-#define __NR_sendfile64         140 /* adjtime under SunOS                         */
-#define __NR_getpeername        141 /* Common                                      */
-#define __NR_futex              142 /* gethostid under SunOS                       */
-#define __NR_gettid             143 /* ENOSYS under SunOS                          */
-#define __NR_getrlimit		144 /* Common                                      */
-#define __NR_setrlimit          145 /* Common                                      */
-#define __NR_pivot_root		146 /* Linux Specific, killpg under SunOS          */
-#define __NR_prctl		147 /* ENOSYS under SunOS                          */
-#define __NR_pciconfig_read	148 /* ENOSYS under SunOS                          */
-#define __NR_pciconfig_write	149 /* ENOSYS under SunOS                          */
-#define __NR_getsockname        150 /* Common                                      */
-#define __NR_inotify_init       151 /* Linux specific                              */
-#define __NR_inotify_add_watch  152 /* Linux specific                              */
-#define __NR_poll               153 /* Common                                      */
-#define __NR_getdents64		154 /* Linux specific				   */
-/* #define __NR_fcntl64         155    Linux sparc32 Specific                      */
-#define __NR_inotify_rm_watch   156 /* Linux specific				   */
-#define __NR_statfs             157 /* Common                                      */
-#define __NR_fstatfs            158 /* Common                                      */
-#define __NR_umount             159 /* Common                                      */
-#define __NR_sched_set_affinity 160 /* Linux specific, async_daemon under SunOS    */
-#define __NR_sched_get_affinity 161 /* Linux specific, getfh under SunOS           */
-#define __NR_getdomainname      162 /* SunOS Specific                              */
-#define __NR_setdomainname      163 /* Common                                      */
-#define __NR_utrap_install	164 /* SYSV ABI/v9 required			   */
-#define __NR_quotactl           165 /* Common                                      */
-#define __NR_set_tid_address    166 /* Linux specific, exportfs under SunOS        */
-#define __NR_mount              167 /* Common                                      */
-#define __NR_ustat              168 /* Common                                      */
-#define __NR_setxattr           169 /* SunOS: semsys                               */
-#define __NR_lsetxattr          170 /* SunOS: msgsys                               */
-#define __NR_fsetxattr          171 /* SunOS: shmsys                               */
-#define __NR_getxattr           172 /* SunOS: auditsys                             */
-#define __NR_lgetxattr          173 /* SunOS: rfssys                               */
-#define __NR_getdents           174 /* Common                                      */
-#define __NR_setsid             175 /* Common                                      */
-#define __NR_fchdir             176 /* Common                                      */
-#define __NR_fgetxattr          177 /* SunOS: fchroot                              */
-#define __NR_listxattr          178 /* SunOS: vpixsys                              */
-#define __NR_llistxattr         179 /* SunOS: aioread                              */
-#define __NR_flistxattr         180 /* SunOS: aiowrite                             */
-#define __NR_removexattr        181 /* SunOS: aiowait                              */
-#define __NR_lremovexattr       182 /* SunOS: aiocancel                            */
-#define __NR_sigpending         183 /* Common                                      */
-#define __NR_query_module	184 /* Linux Specific				   */
-#define __NR_setpgid            185 /* Common                                      */
-#define __NR_fremovexattr       186 /* SunOS: pathconf                             */
-#define __NR_tkill              187 /* SunOS: fpathconf                            */
-#define __NR_exit_group		188 /* Linux specific, sysconf undef SunOS         */
-#define __NR_uname              189 /* Linux Specific                              */
-#define __NR_init_module        190 /* Linux Specific                              */
-#define __NR_personality        191 /* Linux Specific                              */
-#define __NR_remap_file_pages   192 /* Linux Specific                              */
-#define __NR_epoll_create       193 /* Linux Specific                              */
-#define __NR_epoll_ctl          194 /* Linux Specific                              */
-#define __NR_epoll_wait         195 /* Linux Specific                              */
-#define __NR_ioprio_set         196 /* Linux Specific                              */
-#define __NR_getppid            197 /* Linux Specific                              */
-#define __NR_sigaction          198 /* Linux Specific                              */
-#define __NR_sgetmask           199 /* Linux Specific                              */
-#define __NR_ssetmask           200 /* Linux Specific                              */
-#define __NR_sigsuspend         201 /* Linux Specific                              */
-#define __NR_oldlstat           202 /* Linux Specific                              */
-#define __NR_uselib             203 /* Linux Specific                              */
-#define __NR_readdir            204 /* Linux Specific                              */
-#define __NR_readahead          205 /* Linux Specific                              */
-#define __NR_socketcall         206 /* Linux Specific                              */
-#define __NR_syslog             207 /* Linux Specific                              */
-#define __NR_lookup_dcookie     208 /* Linux Specific                              */
-#define __NR_fadvise64          209 /* Linux Specific                              */
-#define __NR_fadvise64_64       210 /* Linux Specific                              */
-#define __NR_tgkill             211 /* Linux Specific                              */
-#define __NR_waitpid            212 /* Linux Specific                              */
-#define __NR_swapoff            213 /* Linux Specific                              */
-#define __NR_sysinfo            214 /* Linux Specific                              */
-#define __NR_ipc                215 /* Linux Specific                              */
-#define __NR_sigreturn          216 /* Linux Specific                              */
-#define __NR_clone              217 /* Linux Specific                              */
-#define __NR_ioprio_get         218 /* Linux Specific                              */
-#define __NR_adjtimex           219 /* Linux Specific                              */
-#define __NR_sigprocmask        220 /* Linux Specific                              */
-#define __NR_create_module      221 /* Linux Specific                              */
-#define __NR_delete_module      222 /* Linux Specific                              */
-#define __NR_get_kernel_syms    223 /* Linux Specific                              */
-#define __NR_getpgid            224 /* Linux Specific                              */
-#define __NR_bdflush            225 /* Linux Specific                              */
-#define __NR_sysfs              226 /* Linux Specific                              */
-#define __NR_afs_syscall        227 /* Linux Specific                              */
-#define __NR_setfsuid           228 /* Linux Specific                              */
-#define __NR_setfsgid           229 /* Linux Specific                              */
-#define __NR__newselect         230 /* Linux Specific                              */
-#ifdef __KERNEL__
-#define __NR_time		231 /* Linux sparc32                               */
-#endif
-#define __NR_splice             232 /* Linux Specific                              */
-#define __NR_stime              233 /* Linux Specific                              */
-#define __NR_statfs64           234 /* Linux Specific                              */
-#define __NR_fstatfs64          235 /* Linux Specific                              */
-#define __NR__llseek            236 /* Linux Specific                              */
-#define __NR_mlock              237
-#define __NR_munlock            238
-#define __NR_mlockall           239
-#define __NR_munlockall         240
-#define __NR_sched_setparam     241
-#define __NR_sched_getparam     242
-#define __NR_sched_setscheduler 243
-#define __NR_sched_getscheduler 244
-#define __NR_sched_yield        245
-#define __NR_sched_get_priority_max 246
-#define __NR_sched_get_priority_min 247
-#define __NR_sched_rr_get_interval  248
-#define __NR_nanosleep          249
-#define __NR_mremap             250
-#define __NR__sysctl            251
-#define __NR_getsid             252
-#define __NR_fdatasync          253
-#define __NR_nfsservctl         254
-#define __NR_sync_file_range	255
-#define __NR_clock_settime	256
-#define __NR_clock_gettime	257
-#define __NR_clock_getres	258
-#define __NR_clock_nanosleep	259
-#define __NR_sched_getaffinity	260
-#define __NR_sched_setaffinity	261
-#define __NR_timer_settime	262
-#define __NR_timer_gettime	263
-#define __NR_timer_getoverrun	264
-#define __NR_timer_delete	265
-#define __NR_timer_create	266
-/* #define __NR_vserver		267 Reserved for VSERVER */
-#define __NR_io_setup		268
-#define __NR_io_destroy		269
-#define __NR_io_submit		270
-#define __NR_io_cancel		271
-#define __NR_io_getevents	272
-#define __NR_mq_open		273
-#define __NR_mq_unlink		274
-#define __NR_mq_timedsend	275
-#define __NR_mq_timedreceive	276
-#define __NR_mq_notify		277
-#define __NR_mq_getsetattr	278
-#define __NR_waitid		279
-#define __NR_tee		280
-#define __NR_add_key		281
-#define __NR_request_key	282
-#define __NR_keyctl		283
-#define __NR_openat		284
-#define __NR_mkdirat		285
-#define __NR_mknodat		286
-#define __NR_fchownat		287
-#define __NR_futimesat		288
-#define __NR_fstatat64		289
-#define __NR_unlinkat		290
-#define __NR_renameat		291
-#define __NR_linkat		292
-#define __NR_symlinkat		293
-#define __NR_readlinkat		294
-#define __NR_fchmodat		295
-#define __NR_faccessat		296
-#define __NR_pselect6		297
-#define __NR_ppoll		298
-#define __NR_unshare		299
-#define __NR_set_robust_list	300
-#define __NR_get_robust_list	301
-#define __NR_migrate_pages	302
-#define __NR_mbind		303
-#define __NR_get_mempolicy	304
-#define __NR_set_mempolicy	305
-#define __NR_kexec_load		306
-#define __NR_move_pages		307
-#define __NR_getcpu		308
-#define __NR_epoll_pwait	309
-#define __NR_utimensat		310
-#define __NR_signalfd		311
-#define __NR_timerfd_create	312
-#define __NR_eventfd		313
-#define __NR_fallocate		314
-#define __NR_timerfd_settime	315
-#define __NR_timerfd_gettime	316
-
-#define NR_SYSCALLS		317
-
-#ifdef __KERNEL__
-#define __ARCH_WANT_IPC_PARSE_VERSION
-#define __ARCH_WANT_OLD_READDIR
-#define __ARCH_WANT_STAT64
-#define __ARCH_WANT_SYS_ALARM
-#define __ARCH_WANT_SYS_GETHOSTNAME
-#define __ARCH_WANT_SYS_PAUSE
-#define __ARCH_WANT_SYS_SGETMASK
-#define __ARCH_WANT_SYS_SIGNAL
-#define __ARCH_WANT_SYS_TIME
-#define __ARCH_WANT_COMPAT_SYS_TIME
-#define __ARCH_WANT_SYS_UTIME
-#define __ARCH_WANT_SYS_WAITPID
-#define __ARCH_WANT_SYS_SOCKETCALL
-#define __ARCH_WANT_SYS_FADVISE64
-#define __ARCH_WANT_SYS_GETPGRP
-#define __ARCH_WANT_SYS_LLSEEK
-#define __ARCH_WANT_SYS_NICE
-#define __ARCH_WANT_SYS_OLDUMOUNT
-#define __ARCH_WANT_SYS_SIGPENDING
-#define __ARCH_WANT_SYS_SIGPROCMASK
-#define __ARCH_WANT_SYS_RT_SIGSUSPEND
-#define __ARCH_WANT_COMPAT_SYS_RT_SIGSUSPEND
-
-/*
- * "Conditional" syscalls
- *
- * What we want is __attribute__((weak,alias("sys_ni_syscall"))),
- * but it doesn't work on all toolchains, so we just do it by hand
- */
-#define cond_syscall(x) asm(".weak\t" #x "\n\t.set\t" #x ",sys_ni_syscall")
-
-#endif /* __KERNEL__ */
-#endif /* _SPARC64_UNISTD_H */
diff --git a/include/asm-sparc/utrap.h b/include/asm-sparc/utrap.h
deleted file mode 100644
index 9da37babbe5b..000000000000
--- a/include/asm-sparc/utrap.h
+++ /dev/null
@@ -1,51 +0,0 @@
-/*
- * include/asm-sparc64/utrap.h
- *
- * Copyright (C) 1997 Jakub Jelinek (jj@sunsite.mff.cuni.cz)
- */
-
-#ifndef __ASM_SPARC64_UTRAP_H
-#define __ASM_SPARC64_UTRAP_H
-
-#define UT_INSTRUCTION_EXCEPTION		1
-#define UT_INSTRUCTION_ERROR			2
-#define UT_INSTRUCTION_PROTECTION		3
-#define UT_ILLTRAP_INSTRUCTION			4
-#define UT_ILLEGAL_INSTRUCTION			5
-#define UT_PRIVILEGED_OPCODE			6
-#define UT_FP_DISABLED				7
-#define UT_FP_EXCEPTION_IEEE_754		8
-#define UT_FP_EXCEPTION_OTHER			9
-#define UT_TAG_OVERVIEW				10
-#define UT_DIVISION_BY_ZERO			11
-#define UT_DATA_EXCEPTION			12
-#define UT_DATA_ERROR				13
-#define UT_DATA_PROTECTION			14
-#define UT_MEM_ADDRESS_NOT_ALIGNED		15
-#define UT_PRIVILEGED_ACTION			16
-#define UT_ASYNC_DATA_ERROR			17
-#define UT_TRAP_INSTRUCTION_16			18
-#define UT_TRAP_INSTRUCTION_17			19
-#define UT_TRAP_INSTRUCTION_18			20
-#define UT_TRAP_INSTRUCTION_19			21
-#define UT_TRAP_INSTRUCTION_20			22
-#define UT_TRAP_INSTRUCTION_21			23
-#define UT_TRAP_INSTRUCTION_22			24
-#define UT_TRAP_INSTRUCTION_23			25
-#define UT_TRAP_INSTRUCTION_24			26
-#define UT_TRAP_INSTRUCTION_25			27
-#define UT_TRAP_INSTRUCTION_26			28
-#define UT_TRAP_INSTRUCTION_27			29
-#define UT_TRAP_INSTRUCTION_28			30
-#define UT_TRAP_INSTRUCTION_29			31
-#define UT_TRAP_INSTRUCTION_30			32
-#define UT_TRAP_INSTRUCTION_31			33
-
-#define	UTH_NOCHANGE				(-1)
-
-#ifndef __ASSEMBLY__
-typedef int utrap_entry_t;
-typedef void *utrap_handler_t;
-#endif /* __ASSEMBLY__ */
-
-#endif /* !(__ASM_SPARC64_PROCESSOR_H) */
diff --git a/include/asm-sparc/xor.h b/include/asm-sparc/xor.h
deleted file mode 100644
index 35089a838c3f..000000000000
--- a/include/asm-sparc/xor.h
+++ /dev/null
@@ -1,8 +0,0 @@
-#ifndef ___ASM_SPARC_XOR_H
-#define ___ASM_SPARC_XOR_H
-#if defined(__sparc__) && defined(__arch64__)
-#include <asm-sparc/xor_64.h>
-#else
-#include <asm-sparc/xor_32.h>
-#endif
-#endif
diff --git a/include/asm-sparc64/Kbuild b/include/asm-sparc64/Kbuild
deleted file mode 100644
index 6cdaf9d33b38..000000000000
--- a/include/asm-sparc64/Kbuild
+++ /dev/null
@@ -1 +0,0 @@
-# dummy file to avoid breaking make headers_install
diff --git a/include/asm-sparc64/agp.h b/include/asm-sparc64/agp.h
deleted file mode 100644
index eb8d4b3f5163..000000000000
--- a/include/asm-sparc64/agp.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-sparc/agp.h>
diff --git a/include/asm-sparc64/apb.h b/include/asm-sparc64/apb.h
deleted file mode 100644
index 5e236ca6e492..000000000000
--- a/include/asm-sparc64/apb.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-sparc/apb.h>
diff --git a/include/asm-sparc64/asi.h b/include/asm-sparc64/asi.h
deleted file mode 100644
index 9b7110c516e8..000000000000
--- a/include/asm-sparc64/asi.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-sparc/asi.h>
diff --git a/include/asm-sparc64/atomic.h b/include/asm-sparc64/atomic.h
deleted file mode 100644
index f5126826ba34..000000000000
--- a/include/asm-sparc64/atomic.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-sparc/atomic.h>
diff --git a/include/asm-sparc64/auxio.h b/include/asm-sparc64/auxio.h
deleted file mode 100644
index 46c9042f30b4..000000000000
--- a/include/asm-sparc64/auxio.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-sparc/auxio.h>
diff --git a/include/asm-sparc64/auxvec.h b/include/asm-sparc64/auxvec.h
deleted file mode 100644
index 1f45c67d7316..000000000000
--- a/include/asm-sparc64/auxvec.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-sparc/auxvec.h>
diff --git a/include/asm-sparc64/backoff.h b/include/asm-sparc64/backoff.h
deleted file mode 100644
index 8ee26d947e0e..000000000000
--- a/include/asm-sparc64/backoff.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-sparc/backoff.h>
diff --git a/include/asm-sparc64/bbc.h b/include/asm-sparc64/bbc.h
deleted file mode 100644
index 06e8b6306514..000000000000
--- a/include/asm-sparc64/bbc.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-sparc/bbc.h>
diff --git a/include/asm-sparc64/bitops.h b/include/asm-sparc64/bitops.h
deleted file mode 100644
index 204404355bdd..000000000000
--- a/include/asm-sparc64/bitops.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-sparc/bitops.h>
diff --git a/include/asm-sparc64/bpp.h b/include/asm-sparc64/bpp.h
deleted file mode 100644
index 514eee20272e..000000000000
--- a/include/asm-sparc64/bpp.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-sparc/bpp.h>
diff --git a/include/asm-sparc64/bug.h b/include/asm-sparc64/bug.h
deleted file mode 100644
index 3433737c7a67..000000000000
--- a/include/asm-sparc64/bug.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-sparc/bug.h>
diff --git a/include/asm-sparc64/bugs.h b/include/asm-sparc64/bugs.h
deleted file mode 100644
index 04ae9e2818cf..000000000000
--- a/include/asm-sparc64/bugs.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-sparc/bugs.h>
diff --git a/include/asm-sparc64/byteorder.h b/include/asm-sparc64/byteorder.h
deleted file mode 100644
index f672855bee17..000000000000
--- a/include/asm-sparc64/byteorder.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-sparc/byteorder.h>
diff --git a/include/asm-sparc64/cache.h b/include/asm-sparc64/cache.h
deleted file mode 100644
index fa9de5cadbf1..000000000000
--- a/include/asm-sparc64/cache.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-sparc/cache.h>
diff --git a/include/asm-sparc64/cacheflush.h b/include/asm-sparc64/cacheflush.h
deleted file mode 100644
index cf5b6b3e8a55..000000000000
--- a/include/asm-sparc64/cacheflush.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-sparc/cacheflush.h>
diff --git a/include/asm-sparc64/chafsr.h b/include/asm-sparc64/chafsr.h
deleted file mode 100644
index aaab97562a39..000000000000
--- a/include/asm-sparc64/chafsr.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-sparc/chafsr.h>
diff --git a/include/asm-sparc64/checksum.h b/include/asm-sparc64/checksum.h
deleted file mode 100644
index c3966c5e29d8..000000000000
--- a/include/asm-sparc64/checksum.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-sparc/checksum.h>
diff --git a/include/asm-sparc64/chmctrl.h b/include/asm-sparc64/chmctrl.h
deleted file mode 100644
index eb757b483b30..000000000000
--- a/include/asm-sparc64/chmctrl.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-sparc/chmctrl.h>
diff --git a/include/asm-sparc64/cmt.h b/include/asm-sparc64/cmt.h
deleted file mode 100644
index b19b445cb810..000000000000
--- a/include/asm-sparc64/cmt.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-sparc/cmt.h>
diff --git a/include/asm-sparc64/compat.h b/include/asm-sparc64/compat.h
deleted file mode 100644
index 8c155d221952..000000000000
--- a/include/asm-sparc64/compat.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-sparc/compat.h>
diff --git a/include/asm-sparc64/compat_signal.h b/include/asm-sparc64/compat_signal.h
deleted file mode 100644
index 7187dcc8cac7..000000000000
--- a/include/asm-sparc64/compat_signal.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-sparc/compat_signal.h>
diff --git a/include/asm-sparc64/cpudata.h b/include/asm-sparc64/cpudata.h
deleted file mode 100644
index 3220e134a579..000000000000
--- a/include/asm-sparc64/cpudata.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-sparc/cpudata.h>
diff --git a/include/asm-sparc64/cputime.h b/include/asm-sparc64/cputime.h
deleted file mode 100644
index 435f37a92f7c..000000000000
--- a/include/asm-sparc64/cputime.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-sparc/cputime.h>
diff --git a/include/asm-sparc64/current.h b/include/asm-sparc64/current.h
deleted file mode 100644
index a7904a7f53a8..000000000000
--- a/include/asm-sparc64/current.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-sparc/current.h>
diff --git a/include/asm-sparc64/dcr.h b/include/asm-sparc64/dcr.h
deleted file mode 100644
index d67613b1f5fe..000000000000
--- a/include/asm-sparc64/dcr.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-sparc/dcr.h>
diff --git a/include/asm-sparc64/dcu.h b/include/asm-sparc64/dcu.h
deleted file mode 100644
index 28853f4968d1..000000000000
--- a/include/asm-sparc64/dcu.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-sparc/dcu.h>
diff --git a/include/asm-sparc64/delay.h b/include/asm-sparc64/delay.h
deleted file mode 100644
index 33dc5589d841..000000000000
--- a/include/asm-sparc64/delay.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-sparc/delay.h>
diff --git a/include/asm-sparc64/device.h b/include/asm-sparc64/device.h
deleted file mode 100644
index 4145c47097e2..000000000000
--- a/include/asm-sparc64/device.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-sparc/device.h>
diff --git a/include/asm-sparc64/display7seg.h b/include/asm-sparc64/display7seg.h
deleted file mode 100644
index e74f046b41de..000000000000
--- a/include/asm-sparc64/display7seg.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-sparc/display7seg.h>
diff --git a/include/asm-sparc64/div64.h b/include/asm-sparc64/div64.h
deleted file mode 100644
index 928c94f99ecf..000000000000
--- a/include/asm-sparc64/div64.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-sparc/div64.h>
diff --git a/include/asm-sparc64/dma-mapping.h b/include/asm-sparc64/dma-mapping.h
deleted file mode 100644
index 380b7b63147f..000000000000
--- a/include/asm-sparc64/dma-mapping.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-sparc/dma-mapping.h>
diff --git a/include/asm-sparc64/dma.h b/include/asm-sparc64/dma.h
deleted file mode 100644
index 2e36248e6b59..000000000000
--- a/include/asm-sparc64/dma.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-sparc/dma.h>
diff --git a/include/asm-sparc64/ebus.h b/include/asm-sparc64/ebus.h
deleted file mode 100644
index d7d476158bd5..000000000000
--- a/include/asm-sparc64/ebus.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-sparc/ebus.h>
diff --git a/include/asm-sparc64/elf.h b/include/asm-sparc64/elf.h
deleted file mode 100644
index f256d9472c82..000000000000
--- a/include/asm-sparc64/elf.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-sparc/elf.h>
diff --git a/include/asm-sparc64/emergency-restart.h b/include/asm-sparc64/emergency-restart.h
deleted file mode 100644
index 2cac7b644da8..000000000000
--- a/include/asm-sparc64/emergency-restart.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-sparc/emergency-restart.h>
diff --git a/include/asm-sparc64/envctrl.h b/include/asm-sparc64/envctrl.h
deleted file mode 100644
index a2cc0ca334ba..000000000000
--- a/include/asm-sparc64/envctrl.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-sparc/envctrl.h>
diff --git a/include/asm-sparc64/errno.h b/include/asm-sparc64/errno.h
deleted file mode 100644
index 9701fe01cc53..000000000000
--- a/include/asm-sparc64/errno.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-sparc/errno.h>
diff --git a/include/asm-sparc64/estate.h b/include/asm-sparc64/estate.h
deleted file mode 100644
index bedd0ef5f19c..000000000000
--- a/include/asm-sparc64/estate.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-sparc/estate.h>
diff --git a/include/asm-sparc64/fb.h b/include/asm-sparc64/fb.h
deleted file mode 100644
index 1c2ac5832f39..000000000000
--- a/include/asm-sparc64/fb.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-sparc/fb.h>
diff --git a/include/asm-sparc64/fbio.h b/include/asm-sparc64/fbio.h
deleted file mode 100644
index c17edf8c7bc4..000000000000
--- a/include/asm-sparc64/fbio.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-sparc/fbio.h>
diff --git a/include/asm-sparc64/fcntl.h b/include/asm-sparc64/fcntl.h
deleted file mode 100644
index 8b1beae48cd1..000000000000
--- a/include/asm-sparc64/fcntl.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-sparc/fcntl.h>
diff --git a/include/asm-sparc64/fhc.h b/include/asm-sparc64/fhc.h
deleted file mode 100644
index 73eb04c19c47..000000000000
--- a/include/asm-sparc64/fhc.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-sparc/fhc.h>
diff --git a/include/asm-sparc64/floppy.h b/include/asm-sparc64/floppy.h
deleted file mode 100644
index 214878114436..000000000000
--- a/include/asm-sparc64/floppy.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-sparc/floppy.h>
diff --git a/include/asm-sparc64/fpumacro.h b/include/asm-sparc64/fpumacro.h
deleted file mode 100644
index 30d6d0f68bc3..000000000000
--- a/include/asm-sparc64/fpumacro.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-sparc/fpumacro.h>
diff --git a/include/asm-sparc64/futex.h b/include/asm-sparc64/futex.h
deleted file mode 100644
index 1ceb0bb2fe53..000000000000
--- a/include/asm-sparc64/futex.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-sparc/futex.h>
diff --git a/include/asm-sparc64/hardirq.h b/include/asm-sparc64/hardirq.h
deleted file mode 100644
index 63dca3db11f3..000000000000
--- a/include/asm-sparc64/hardirq.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-sparc/hardirq.h>
diff --git a/include/asm-sparc64/head.h b/include/asm-sparc64/head.h
deleted file mode 100644
index 2254c09e53f9..000000000000
--- a/include/asm-sparc64/head.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-sparc/head.h>
diff --git a/include/asm-sparc64/hugetlb.h b/include/asm-sparc64/hugetlb.h
deleted file mode 100644
index 21d8f0a9c243..000000000000
--- a/include/asm-sparc64/hugetlb.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-sparc/hugetlb.h>
diff --git a/include/asm-sparc64/hvtramp.h b/include/asm-sparc64/hvtramp.h
deleted file mode 100644
index fb46bfe934a7..000000000000
--- a/include/asm-sparc64/hvtramp.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-sparc/hvtramp.h>
diff --git a/include/asm-sparc64/hw_irq.h b/include/asm-sparc64/hw_irq.h
deleted file mode 100644
index 16920a291f51..000000000000
--- a/include/asm-sparc64/hw_irq.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-sparc/hw_irq.h>
diff --git a/include/asm-sparc64/hypervisor.h b/include/asm-sparc64/hypervisor.h
deleted file mode 100644
index fe7e51a9e429..000000000000
--- a/include/asm-sparc64/hypervisor.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-sparc/hypervisor.h>
diff --git a/include/asm-sparc64/ide.h b/include/asm-sparc64/ide.h
deleted file mode 100644
index 7125317a428d..000000000000
--- a/include/asm-sparc64/ide.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-sparc/ide.h>
diff --git a/include/asm-sparc64/idprom.h b/include/asm-sparc64/idprom.h
deleted file mode 100644
index c22f9c30bc78..000000000000
--- a/include/asm-sparc64/idprom.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-sparc/idprom.h>
diff --git a/include/asm-sparc64/intr_queue.h b/include/asm-sparc64/intr_queue.h
deleted file mode 100644
index f7225015b3db..000000000000
--- a/include/asm-sparc64/intr_queue.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-sparc/intr_queue.h>
diff --git a/include/asm-sparc64/io.h b/include/asm-sparc64/io.h
deleted file mode 100644
index 25ff258dfd33..000000000000
--- a/include/asm-sparc64/io.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-sparc/io.h>
diff --git a/include/asm-sparc64/ioctl.h b/include/asm-sparc64/ioctl.h
deleted file mode 100644
index 18fc5623ff51..000000000000
--- a/include/asm-sparc64/ioctl.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-sparc/ioctl.h>
diff --git a/include/asm-sparc64/ioctls.h b/include/asm-sparc64/ioctls.h
deleted file mode 100644
index dcd5540ec103..000000000000
--- a/include/asm-sparc64/ioctls.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-sparc/ioctls.h>
diff --git a/include/asm-sparc64/iommu.h b/include/asm-sparc64/iommu.h
deleted file mode 100644
index 76252bb85e97..000000000000
--- a/include/asm-sparc64/iommu.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-sparc/iommu.h>
diff --git a/include/asm-sparc64/ipcbuf.h b/include/asm-sparc64/ipcbuf.h
deleted file mode 100644
index 41dfaf1149b5..000000000000
--- a/include/asm-sparc64/ipcbuf.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-sparc/ipcbuf.h>
diff --git a/include/asm-sparc64/irq.h b/include/asm-sparc64/irq.h
deleted file mode 100644
index b2102e65947c..000000000000
--- a/include/asm-sparc64/irq.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-sparc/irq.h>
diff --git a/include/asm-sparc64/irq_regs.h b/include/asm-sparc64/irq_regs.h
deleted file mode 100644
index 1e2b8a1e745a..000000000000
--- a/include/asm-sparc64/irq_regs.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-sparc/irq_regs.h>
diff --git a/include/asm-sparc64/irqflags.h b/include/asm-sparc64/irqflags.h
deleted file mode 100644
index 27b091fc3fa0..000000000000
--- a/include/asm-sparc64/irqflags.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-sparc/irqflags.h>
diff --git a/include/asm-sparc64/kdebug.h b/include/asm-sparc64/kdebug.h
deleted file mode 100644
index 78cfd5d2749b..000000000000
--- a/include/asm-sparc64/kdebug.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-sparc/kdebug.h>
diff --git a/include/asm-sparc64/kgdb.h b/include/asm-sparc64/kgdb.h
deleted file mode 100644
index aa6532fd3a13..000000000000
--- a/include/asm-sparc64/kgdb.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-sparc/kgdb.h>
diff --git a/include/asm-sparc64/kmap_types.h b/include/asm-sparc64/kmap_types.h
deleted file mode 100644
index 276530cf5395..000000000000
--- a/include/asm-sparc64/kmap_types.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-sparc/kmap_types.h>
diff --git a/include/asm-sparc64/kprobes.h b/include/asm-sparc64/kprobes.h
deleted file mode 100644
index c55e43e4d2a4..000000000000
--- a/include/asm-sparc64/kprobes.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-sparc/kprobes.h>
diff --git a/include/asm-sparc64/kvm.h b/include/asm-sparc64/kvm.h
deleted file mode 100644
index 53564ad86b15..000000000000
--- a/include/asm-sparc64/kvm.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-sparc/kvm.h>
diff --git a/include/asm-sparc64/ldc.h b/include/asm-sparc64/ldc.h
deleted file mode 100644
index 40f3f231c457..000000000000
--- a/include/asm-sparc64/ldc.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-sparc/ldc.h>
diff --git a/include/asm-sparc64/linkage.h b/include/asm-sparc64/linkage.h
deleted file mode 100644
index 3ea4fd13f193..000000000000
--- a/include/asm-sparc64/linkage.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-sparc/linkage.h>
diff --git a/include/asm-sparc64/lmb.h b/include/asm-sparc64/lmb.h
deleted file mode 100644
index 3d04981701e2..000000000000
--- a/include/asm-sparc64/lmb.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-sparc/lmb.h>
diff --git a/include/asm-sparc64/local.h b/include/asm-sparc64/local.h
deleted file mode 100644
index c11c530f74d0..000000000000
--- a/include/asm-sparc64/local.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-generic/local.h>
diff --git a/include/asm-sparc64/lsu.h b/include/asm-sparc64/lsu.h
deleted file mode 100644
index 4e3d8b128a58..000000000000
--- a/include/asm-sparc64/lsu.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-sparc/lsu.h>
diff --git a/include/asm-sparc64/mc146818rtc.h b/include/asm-sparc64/mc146818rtc.h
deleted file mode 100644
index 97842e6ed1c2..000000000000
--- a/include/asm-sparc64/mc146818rtc.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-sparc/mc146818rtc.h>
diff --git a/include/asm-sparc64/mdesc.h b/include/asm-sparc64/mdesc.h
deleted file mode 100644
index 165a19347286..000000000000
--- a/include/asm-sparc64/mdesc.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-sparc/mdesc.h>
diff --git a/include/asm-sparc64/mman.h b/include/asm-sparc64/mman.h
deleted file mode 100644
index 17ddb1724f51..000000000000
--- a/include/asm-sparc64/mman.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-sparc/mman.h>
diff --git a/include/asm-sparc64/mmu.h b/include/asm-sparc64/mmu.h
deleted file mode 100644
index e677a64d8db1..000000000000
--- a/include/asm-sparc64/mmu.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-sparc/mmu.h>
diff --git a/include/asm-sparc64/mmu_context.h b/include/asm-sparc64/mmu_context.h
deleted file mode 100644
index 877fee94bd4e..000000000000
--- a/include/asm-sparc64/mmu_context.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-sparc/mmu_context.h>
diff --git a/include/asm-sparc64/mmzone.h b/include/asm-sparc64/mmzone.h
deleted file mode 100644
index 43a710f7892a..000000000000
--- a/include/asm-sparc64/mmzone.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-sparc/mmzone.h>
diff --git a/include/asm-sparc64/module.h b/include/asm-sparc64/module.h
deleted file mode 100644
index a9606db55e4a..000000000000
--- a/include/asm-sparc64/module.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-sparc/module.h>
diff --git a/include/asm-sparc64/mostek.h b/include/asm-sparc64/mostek.h
deleted file mode 100644
index 95a752f7e875..000000000000
--- a/include/asm-sparc64/mostek.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-sparc/mostek.h>
diff --git a/include/asm-sparc64/msgbuf.h b/include/asm-sparc64/msgbuf.h
deleted file mode 100644
index 5b33cc9d9bfb..000000000000
--- a/include/asm-sparc64/msgbuf.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-sparc/msgbuf.h>
diff --git a/include/asm-sparc64/mutex.h b/include/asm-sparc64/mutex.h
deleted file mode 100644
index c0c0f8f260d6..000000000000
--- a/include/asm-sparc64/mutex.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-sparc/mutex.h>
diff --git a/include/asm-sparc64/namei.h b/include/asm-sparc64/namei.h
deleted file mode 100644
index 1344a910ba2f..000000000000
--- a/include/asm-sparc64/namei.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-sparc/namei.h>
diff --git a/include/asm-sparc64/ns87303.h b/include/asm-sparc64/ns87303.h
deleted file mode 100644
index 5f369d4df3db..000000000000
--- a/include/asm-sparc64/ns87303.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-sparc/ns87303.h>
diff --git a/include/asm-sparc64/of_device.h b/include/asm-sparc64/of_device.h
deleted file mode 100644
index a769fdbe164a..000000000000
--- a/include/asm-sparc64/of_device.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-sparc/of_device.h>
diff --git a/include/asm-sparc64/of_platform.h b/include/asm-sparc64/of_platform.h
deleted file mode 100644
index f7c427b8bc61..000000000000
--- a/include/asm-sparc64/of_platform.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-sparc/of_platform.h>
diff --git a/include/asm-sparc64/openprom.h b/include/asm-sparc64/openprom.h
deleted file mode 100644
index acf4b234fae3..000000000000
--- a/include/asm-sparc64/openprom.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-sparc/openprom.h>
diff --git a/include/asm-sparc64/openpromio.h b/include/asm-sparc64/openpromio.h
deleted file mode 100644
index 122fabda21f1..000000000000
--- a/include/asm-sparc64/openpromio.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-sparc/openpromio.h>
diff --git a/include/asm-sparc64/oplib.h b/include/asm-sparc64/oplib.h
deleted file mode 100644
index d93e44e63510..000000000000
--- a/include/asm-sparc64/oplib.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-sparc/oplib.h>
diff --git a/include/asm-sparc64/page.h b/include/asm-sparc64/page.h
deleted file mode 100644
index f46c1fb53028..000000000000
--- a/include/asm-sparc64/page.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-sparc/page.h>
diff --git a/include/asm-sparc64/param.h b/include/asm-sparc64/param.h
deleted file mode 100644
index 40c6dc110822..000000000000
--- a/include/asm-sparc64/param.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-sparc/param.h>
diff --git a/include/asm-sparc64/parport.h b/include/asm-sparc64/parport.h
deleted file mode 100644
index b4e4ca812eb6..000000000000
--- a/include/asm-sparc64/parport.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-sparc/parport.h>
diff --git a/include/asm-sparc64/pci.h b/include/asm-sparc64/pci.h
deleted file mode 100644
index da54c4d1f39c..000000000000
--- a/include/asm-sparc64/pci.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-sparc/pci.h>
diff --git a/include/asm-sparc64/percpu.h b/include/asm-sparc64/percpu.h
deleted file mode 100644
index 292729bb350f..000000000000
--- a/include/asm-sparc64/percpu.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-sparc/percpu.h>
diff --git a/include/asm-sparc64/perfctr.h b/include/asm-sparc64/perfctr.h
deleted file mode 100644
index 52073a9f8e30..000000000000
--- a/include/asm-sparc64/perfctr.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-sparc/perfctr.h>
diff --git a/include/asm-sparc64/pgalloc.h b/include/asm-sparc64/pgalloc.h
deleted file mode 100644
index bec31641011c..000000000000
--- a/include/asm-sparc64/pgalloc.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-sparc/pgalloc.h>
diff --git a/include/asm-sparc64/pgtable.h b/include/asm-sparc64/pgtable.h
deleted file mode 100644
index 9decbd99aeff..000000000000
--- a/include/asm-sparc64/pgtable.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-sparc/pgtable.h>
diff --git a/include/asm-sparc64/pil.h b/include/asm-sparc64/pil.h
deleted file mode 100644
index d805f33f1e0f..000000000000
--- a/include/asm-sparc64/pil.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-sparc/pil.h>
diff --git a/include/asm-sparc64/poll.h b/include/asm-sparc64/poll.h
deleted file mode 100644
index 8e2f31b4641a..000000000000
--- a/include/asm-sparc64/poll.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-sparc/poll.h>
diff --git a/include/asm-sparc64/posix_types.h b/include/asm-sparc64/posix_types.h
deleted file mode 100644
index 8cee99200232..000000000000
--- a/include/asm-sparc64/posix_types.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-sparc/posix_types.h>
diff --git a/include/asm-sparc64/processor.h b/include/asm-sparc64/processor.h
deleted file mode 100644
index 21de6cc182eb..000000000000
--- a/include/asm-sparc64/processor.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-sparc/processor.h>
diff --git a/include/asm-sparc64/prom.h b/include/asm-sparc64/prom.h
deleted file mode 100644
index 5fa166ee3ffa..000000000000
--- a/include/asm-sparc64/prom.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-sparc/prom.h>
diff --git a/include/asm-sparc64/psrcompat.h b/include/asm-sparc64/psrcompat.h
deleted file mode 100644
index 587846f48358..000000000000
--- a/include/asm-sparc64/psrcompat.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-sparc/psrcompat.h>
diff --git a/include/asm-sparc64/pstate.h b/include/asm-sparc64/pstate.h
deleted file mode 100644
index 3ccf0be25360..000000000000
--- a/include/asm-sparc64/pstate.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-sparc/pstate.h>
diff --git a/include/asm-sparc64/ptrace.h b/include/asm-sparc64/ptrace.h
deleted file mode 100644
index 1a55b9fb3b0c..000000000000
--- a/include/asm-sparc64/ptrace.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-sparc/ptrace.h>
diff --git a/include/asm-sparc64/reboot.h b/include/asm-sparc64/reboot.h
deleted file mode 100644
index 0d72eb811cc8..000000000000
--- a/include/asm-sparc64/reboot.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-sparc/reboot.h>
diff --git a/include/asm-sparc64/reg.h b/include/asm-sparc64/reg.h
deleted file mode 100644
index 495bab27da07..000000000000
--- a/include/asm-sparc64/reg.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-sparc/reg.h>
diff --git a/include/asm-sparc64/resource.h b/include/asm-sparc64/resource.h
deleted file mode 100644
index 46e3bc0de476..000000000000
--- a/include/asm-sparc64/resource.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-sparc/resource.h>
diff --git a/include/asm-sparc64/rtc.h b/include/asm-sparc64/rtc.h
deleted file mode 100644
index e49a9685aead..000000000000
--- a/include/asm-sparc64/rtc.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-sparc/rtc.h>
diff --git a/include/asm-sparc64/rwsem-const.h b/include/asm-sparc64/rwsem-const.h
deleted file mode 100644
index 2a1de315c86a..000000000000
--- a/include/asm-sparc64/rwsem-const.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-sparc/rwsem-const.h>
diff --git a/include/asm-sparc64/rwsem.h b/include/asm-sparc64/rwsem.h
deleted file mode 100644
index 6943c56ed087..000000000000
--- a/include/asm-sparc64/rwsem.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-sparc/rwsem.h>
diff --git a/include/asm-sparc64/sbus.h b/include/asm-sparc64/sbus.h
deleted file mode 100644
index 0cab0e89b874..000000000000
--- a/include/asm-sparc64/sbus.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-sparc/sbus.h>
diff --git a/include/asm-sparc64/scatterlist.h b/include/asm-sparc64/scatterlist.h
deleted file mode 100644
index b7fef95953ca..000000000000
--- a/include/asm-sparc64/scatterlist.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-sparc/scatterlist.h>
diff --git a/include/asm-sparc64/scratchpad.h b/include/asm-sparc64/scratchpad.h
deleted file mode 100644
index 23675f6a915a..000000000000
--- a/include/asm-sparc64/scratchpad.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-sparc/scratchpad.h>
diff --git a/include/asm-sparc64/seccomp.h b/include/asm-sparc64/seccomp.h
deleted file mode 100644
index f22f02a08a61..000000000000
--- a/include/asm-sparc64/seccomp.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-sparc/seccomp.h>
diff --git a/include/asm-sparc64/sections.h b/include/asm-sparc64/sections.h
deleted file mode 100644
index 721496f8b2be..000000000000
--- a/include/asm-sparc64/sections.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-sparc/sections.h>
diff --git a/include/asm-sparc64/sembuf.h b/include/asm-sparc64/sembuf.h
deleted file mode 100644
index c55b95214136..000000000000
--- a/include/asm-sparc64/sembuf.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-sparc/sembuf.h>
diff --git a/include/asm-sparc64/setup.h b/include/asm-sparc64/setup.h
deleted file mode 100644
index 7143d06b2c55..000000000000
--- a/include/asm-sparc64/setup.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-sparc/setup.h>
diff --git a/include/asm-sparc64/sfafsr.h b/include/asm-sparc64/sfafsr.h
deleted file mode 100644
index 8036fc377a4d..000000000000
--- a/include/asm-sparc64/sfafsr.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-sparc/sfafsr.h>
diff --git a/include/asm-sparc64/sfp-machine.h b/include/asm-sparc64/sfp-machine.h
deleted file mode 100644
index 7bbc4fecdc7d..000000000000
--- a/include/asm-sparc64/sfp-machine.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-sparc/sfp-machine.h>
diff --git a/include/asm-sparc64/shmbuf.h b/include/asm-sparc64/shmbuf.h
deleted file mode 100644
index 0c54a2d68681..000000000000
--- a/include/asm-sparc64/shmbuf.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-sparc/shmbuf.h>
diff --git a/include/asm-sparc64/shmparam.h b/include/asm-sparc64/shmparam.h
deleted file mode 100644
index 5fa3a9b05e7f..000000000000
--- a/include/asm-sparc64/shmparam.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-sparc/shmparam.h>
diff --git a/include/asm-sparc64/sigcontext.h b/include/asm-sparc64/sigcontext.h
deleted file mode 100644
index 5b16dcce44f2..000000000000
--- a/include/asm-sparc64/sigcontext.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-sparc/sigcontext.h>
diff --git a/include/asm-sparc64/siginfo.h b/include/asm-sparc64/siginfo.h
deleted file mode 100644
index 8ffd6ebabc7a..000000000000
--- a/include/asm-sparc64/siginfo.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-sparc/siginfo.h>
diff --git a/include/asm-sparc64/signal.h b/include/asm-sparc64/signal.h
deleted file mode 100644
index 79705e5d49c3..000000000000
--- a/include/asm-sparc64/signal.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-sparc/signal.h>
diff --git a/include/asm-sparc64/smp.h b/include/asm-sparc64/smp.h
deleted file mode 100644
index 5095a2cbea52..000000000000
--- a/include/asm-sparc64/smp.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-sparc/smp.h>
diff --git a/include/asm-sparc64/socket.h b/include/asm-sparc64/socket.h
deleted file mode 100644
index 13e0d5d94bb3..000000000000
--- a/include/asm-sparc64/socket.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-sparc/socket.h>
diff --git a/include/asm-sparc64/sockios.h b/include/asm-sparc64/sockios.h
deleted file mode 100644
index 2cb4b641482c..000000000000
--- a/include/asm-sparc64/sockios.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-sparc/sockios.h>
diff --git a/include/asm-sparc64/sparsemem.h b/include/asm-sparc64/sparsemem.h
deleted file mode 100644
index e681f22a97ae..000000000000
--- a/include/asm-sparc64/sparsemem.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-sparc/sparsemem.h>
diff --git a/include/asm-sparc64/spinlock.h b/include/asm-sparc64/spinlock.h
deleted file mode 100644
index 0115b8156eb8..000000000000
--- a/include/asm-sparc64/spinlock.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-sparc/spinlock.h>
diff --git a/include/asm-sparc64/spinlock_types.h b/include/asm-sparc64/spinlock_types.h
deleted file mode 100644
index 48d81c8734b5..000000000000
--- a/include/asm-sparc64/spinlock_types.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-sparc/spinlock_types.h>
diff --git a/include/asm-sparc64/spitfire.h b/include/asm-sparc64/spitfire.h
deleted file mode 100644
index 4430d2fbb0dc..000000000000
--- a/include/asm-sparc64/spitfire.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-sparc/spitfire.h>
diff --git a/include/asm-sparc64/sstate.h b/include/asm-sparc64/sstate.h
deleted file mode 100644
index 97720ce2fd43..000000000000
--- a/include/asm-sparc64/sstate.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-sparc/sstate.h>
diff --git a/include/asm-sparc64/stacktrace.h b/include/asm-sparc64/stacktrace.h
deleted file mode 100644
index adc9b92c0ef1..000000000000
--- a/include/asm-sparc64/stacktrace.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-sparc/stacktrace.h>
diff --git a/include/asm-sparc64/starfire.h b/include/asm-sparc64/starfire.h
deleted file mode 100644
index db97daa3bed4..000000000000
--- a/include/asm-sparc64/starfire.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-sparc/starfire.h>
diff --git a/include/asm-sparc64/stat.h b/include/asm-sparc64/stat.h
deleted file mode 100644
index b108a866256b..000000000000
--- a/include/asm-sparc64/stat.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-sparc/stat.h>
diff --git a/include/asm-sparc64/statfs.h b/include/asm-sparc64/statfs.h
deleted file mode 100644
index 5503d6a4c67e..000000000000
--- a/include/asm-sparc64/statfs.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-sparc/statfs.h>
diff --git a/include/asm-sparc64/string.h b/include/asm-sparc64/string.h
deleted file mode 100644
index 5018cd8b6ad0..000000000000
--- a/include/asm-sparc64/string.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-sparc/string.h>
diff --git a/include/asm-sparc64/sunbpp.h b/include/asm-sparc64/sunbpp.h
deleted file mode 100644
index 9632be290eb5..000000000000
--- a/include/asm-sparc64/sunbpp.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-sparc/sunbpp.h>
diff --git a/include/asm-sparc64/syscalls.h b/include/asm-sparc64/syscalls.h
deleted file mode 100644
index 3477b16e30ca..000000000000
--- a/include/asm-sparc64/syscalls.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-sparc/syscalls.h>
diff --git a/include/asm-sparc64/system.h b/include/asm-sparc64/system.h
deleted file mode 100644
index be2603c2e527..000000000000
--- a/include/asm-sparc64/system.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-sparc/system.h>
diff --git a/include/asm-sparc64/termbits.h b/include/asm-sparc64/termbits.h
deleted file mode 100644
index e03f97592c70..000000000000
--- a/include/asm-sparc64/termbits.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-sparc/termbits.h>
diff --git a/include/asm-sparc64/termios.h b/include/asm-sparc64/termios.h
deleted file mode 100644
index 940495eb05cc..000000000000
--- a/include/asm-sparc64/termios.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-sparc/termios.h>
diff --git a/include/asm-sparc64/thread_info.h b/include/asm-sparc64/thread_info.h
deleted file mode 100644
index 92bed7913395..000000000000
--- a/include/asm-sparc64/thread_info.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-sparc/thread_info.h>
diff --git a/include/asm-sparc64/timer.h b/include/asm-sparc64/timer.h
deleted file mode 100644
index 88026d83cc93..000000000000
--- a/include/asm-sparc64/timer.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-sparc/timer.h>
diff --git a/include/asm-sparc64/timex.h b/include/asm-sparc64/timex.h
deleted file mode 100644
index 8dd59ee24b48..000000000000
--- a/include/asm-sparc64/timex.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-sparc/timex.h>
diff --git a/include/asm-sparc64/tlb.h b/include/asm-sparc64/tlb.h
deleted file mode 100644
index ae92fce10936..000000000000
--- a/include/asm-sparc64/tlb.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-sparc/tlb.h>
diff --git a/include/asm-sparc64/tlbflush.h b/include/asm-sparc64/tlbflush.h
deleted file mode 100644
index a43979a06cd9..000000000000
--- a/include/asm-sparc64/tlbflush.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-sparc/tlbflush.h>
diff --git a/include/asm-sparc64/topology.h b/include/asm-sparc64/topology.h
deleted file mode 100644
index 46999b60fbba..000000000000
--- a/include/asm-sparc64/topology.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-sparc/topology.h>
diff --git a/include/asm-sparc64/tsb.h b/include/asm-sparc64/tsb.h
deleted file mode 100644
index 3677a302ea3e..000000000000
--- a/include/asm-sparc64/tsb.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-sparc/tsb.h>
diff --git a/include/asm-sparc64/ttable.h b/include/asm-sparc64/ttable.h
deleted file mode 100644
index a550f1bf6f9b..000000000000
--- a/include/asm-sparc64/ttable.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-sparc/ttable.h>
diff --git a/include/asm-sparc64/types.h b/include/asm-sparc64/types.h
deleted file mode 100644
index cfbfad5043eb..000000000000
--- a/include/asm-sparc64/types.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-sparc/types.h>
diff --git a/include/asm-sparc64/uaccess.h b/include/asm-sparc64/uaccess.h
deleted file mode 100644
index 2872d22844f3..000000000000
--- a/include/asm-sparc64/uaccess.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-sparc/uaccess.h>
diff --git a/include/asm-sparc64/uctx.h b/include/asm-sparc64/uctx.h
deleted file mode 100644
index 9e1b5794b07f..000000000000
--- a/include/asm-sparc64/uctx.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-sparc/uctx.h>
diff --git a/include/asm-sparc64/unaligned.h b/include/asm-sparc64/unaligned.h
deleted file mode 100644
index 19fbf9508acf..000000000000
--- a/include/asm-sparc64/unaligned.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-sparc/unaligned.h>
diff --git a/include/asm-sparc64/unistd.h b/include/asm-sparc64/unistd.h
deleted file mode 100644
index ad86e0b7a455..000000000000
--- a/include/asm-sparc64/unistd.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-sparc/unistd.h>
diff --git a/include/asm-sparc64/upa.h b/include/asm-sparc64/upa.h
deleted file mode 100644
index aab72930815a..000000000000
--- a/include/asm-sparc64/upa.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-sparc/upa.h>
diff --git a/include/asm-sparc64/user.h b/include/asm-sparc64/user.h
deleted file mode 100644
index 29fc6e906c29..000000000000
--- a/include/asm-sparc64/user.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-sparc/user.h>
diff --git a/include/asm-sparc64/utrap.h b/include/asm-sparc64/utrap.h
deleted file mode 100644
index b030a41f1895..000000000000
--- a/include/asm-sparc64/utrap.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-sparc/utrap.h>
diff --git a/include/asm-sparc64/vga.h b/include/asm-sparc64/vga.h
deleted file mode 100644
index fbf4d58a56f0..000000000000
--- a/include/asm-sparc64/vga.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-sparc/vga.h>
diff --git a/include/asm-sparc64/vio.h b/include/asm-sparc64/vio.h
deleted file mode 100644
index 299b26ab81a7..000000000000
--- a/include/asm-sparc64/vio.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-sparc/vio.h>
diff --git a/include/asm-sparc64/visasm.h b/include/asm-sparc64/visasm.h
deleted file mode 100644
index 837a12278f4a..000000000000
--- a/include/asm-sparc64/visasm.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-sparc/visasm.h>
diff --git a/include/asm-sparc64/watchdog.h b/include/asm-sparc64/watchdog.h
deleted file mode 100644
index b0f2857145f7..000000000000
--- a/include/asm-sparc64/watchdog.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-sparc/watchdog.h>
diff --git a/include/asm-sparc64/xor.h b/include/asm-sparc64/xor.h
deleted file mode 100644
index ef187cc07ed5..000000000000
--- a/include/asm-sparc64/xor.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-sparc/xor.h>
diff --git a/include/asm-um/kvm.h b/include/asm-um/kvm.h
deleted file mode 100644
index 66aa77094551..000000000000
--- a/include/asm-um/kvm.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef __LINUX_KVM_UM_H
-#define __LINUX_KVM_UM_H
-
-/* um does not support KVM */
-
-#endif
diff --git a/include/asm-um/namei.h b/include/asm-um/namei.h
deleted file mode 100644
index 002984d5bc85..000000000000
--- a/include/asm-um/namei.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef __UM_NAMEI_H
-#define __UM_NAMEI_H
-
-#include "asm/arch/namei.h"
-
-#endif
diff --git a/include/asm-um/thread_info.h b/include/asm-um/thread_info.h
index 356b83e2c22e..e07e72846c7a 100644
--- a/include/asm-um/thread_info.h
+++ b/include/asm-um/thread_info.h
@@ -53,21 +53,7 @@ static inline struct thread_info *current_thread_info(void)
 	return ti;
 }
 
-#ifdef CONFIG_DEBUG_STACK_USAGE
-
-#define alloc_thread_info(tsk) \
-	((struct thread_info *) __get_free_pages(GFP_KERNEL | __GFP_ZERO, \
-						 CONFIG_KERNEL_STACK_ORDER))
-#else
-
-/* thread information allocation */
-#define alloc_thread_info(tsk) \
-	((struct thread_info *) __get_free_pages(GFP_KERNEL, \
-						 CONFIG_KERNEL_STACK_ORDER))
-#endif
-
-#define free_thread_info(ti) \
-	free_pages((unsigned long)(ti),CONFIG_KERNEL_STACK_ORDER)
+#define THREAD_SIZE_ORDER CONFIG_KERNEL_STACK_ORDER
 
 #endif
 
diff --git a/include/asm-v850/namei.h b/include/asm-v850/namei.h
deleted file mode 100644
index ee8339b23843..000000000000
--- a/include/asm-v850/namei.h
+++ /dev/null
@@ -1,17 +0,0 @@
-/*
- * linux/include/asm-v850/namei.h
- *
- * Included from linux/fs/namei.c
- */
-
-#ifndef __V850_NAMEI_H__
-#define __V850_NAMEI_H__
-
-/* This dummy routine maybe changed to something useful
- * for /usr/gnemul/ emulation stuff.
- * Look at asm-sparc/namei.h for details.
- */
-
-#define __emul_prefix() NULL
-
-#endif /* __V850_NAMEI_H__ */
diff --git a/include/asm-x86/Kbuild b/include/asm-x86/Kbuild
index 1e3554596f72..4a8e80cdcfa5 100644
--- a/include/asm-x86/Kbuild
+++ b/include/asm-x86/Kbuild
@@ -3,7 +3,6 @@ include include/asm-generic/Kbuild.asm
 header-y += boot.h
 header-y += bootparam.h
 header-y += debugreg.h
-header-y += kvm.h
 header-y += ldt.h
 header-y += msr-index.h
 header-y += prctl.h
@@ -19,7 +18,6 @@ unifdef-y += msr.h
 unifdef-y += mtrr.h
 unifdef-y += posix_types_32.h
 unifdef-y += posix_types_64.h
-unifdef-y += ptrace.h
 unifdef-y += unistd_32.h
 unifdef-y += unistd_64.h
 unifdef-y += vm86.h
diff --git a/include/asm-x86/a.out-core.h b/include/asm-x86/a.out-core.h
index 714207a1c387..f5705761a37b 100644
--- a/include/asm-x86/a.out-core.h
+++ b/include/asm-x86/a.out-core.h
@@ -9,8 +9,8 @@
  * 2 of the Licence, or (at your option) any later version.
  */
 
-#ifndef _ASM_A_OUT_CORE_H
-#define _ASM_A_OUT_CORE_H
+#ifndef ASM_X86__A_OUT_CORE_H
+#define ASM_X86__A_OUT_CORE_H
 
 #ifdef __KERNEL__
 #ifdef CONFIG_X86_32
@@ -70,4 +70,4 @@ static inline void aout_dump_thread(struct pt_regs *regs, struct user *dump)
 
 #endif /* CONFIG_X86_32 */
 #endif /* __KERNEL__ */
-#endif /* _ASM_A_OUT_CORE_H */
+#endif /* ASM_X86__A_OUT_CORE_H */
diff --git a/include/asm-x86/a.out.h b/include/asm-x86/a.out.h
index 4684f97a5bbd..0948748bc69c 100644
--- a/include/asm-x86/a.out.h
+++ b/include/asm-x86/a.out.h
@@ -1,5 +1,5 @@
-#ifndef _ASM_X86_A_OUT_H
-#define _ASM_X86_A_OUT_H
+#ifndef ASM_X86__A_OUT_H
+#define ASM_X86__A_OUT_H
 
 struct exec
 {
@@ -17,4 +17,4 @@ struct exec
 #define N_DRSIZE(a)	((a).a_drsize)
 #define N_SYMSIZE(a)	((a).a_syms)
 
-#endif /* _ASM_X86_A_OUT_H */
+#endif /* ASM_X86__A_OUT_H */
diff --git a/include/asm-x86/acpi.h b/include/asm-x86/acpi.h
index 635d764dc13e..bd76299586b3 100644
--- a/include/asm-x86/acpi.h
+++ b/include/asm-x86/acpi.h
@@ -1,5 +1,5 @@
-#ifndef _ASM_X86_ACPI_H
-#define _ASM_X86_ACPI_H
+#ifndef ASM_X86__ACPI_H
+#define ASM_X86__ACPI_H
 
 /*
  *  Copyright (C) 2001 Paul Diefenbaugh <paul.s.diefenbaugh@intel.com>
@@ -173,4 +173,4 @@ static inline void acpi_fake_nodes(const struct bootnode *fake_nodes,
 
 #define acpi_unlazy_tlb(x)	leave_mm(x)
 
-#endif /*__X86_ASM_ACPI_H*/
+#endif /* ASM_X86__ACPI_H */
diff --git a/include/asm-x86/agp.h b/include/asm-x86/agp.h
index e4004a9f6a9a..3617fd4fcdf9 100644
--- a/include/asm-x86/agp.h
+++ b/include/asm-x86/agp.h
@@ -1,5 +1,5 @@
-#ifndef _ASM_X86_AGP_H
-#define _ASM_X86_AGP_H
+#ifndef ASM_X86__AGP_H
+#define ASM_X86__AGP_H
 
 #include <asm/pgtable.h>
 #include <asm/cacheflush.h>
@@ -32,4 +32,4 @@
 #define free_gatt_pages(table, order)	\
 	free_pages((unsigned long)(table), (order))
 
-#endif
+#endif /* ASM_X86__AGP_H */
diff --git a/include/asm-x86/alternative.h b/include/asm-x86/alternative.h
index f6aa18eadf71..22d3c9862bf3 100644
--- a/include/asm-x86/alternative.h
+++ b/include/asm-x86/alternative.h
@@ -1,5 +1,5 @@
-#ifndef _ASM_X86_ALTERNATIVE_H
-#define _ASM_X86_ALTERNATIVE_H
+#ifndef ASM_X86__ALTERNATIVE_H
+#define ASM_X86__ALTERNATIVE_H
 
 #include <linux/types.h>
 #include <linux/stddef.h>
@@ -180,4 +180,4 @@ extern void add_nops(void *insns, unsigned int len);
 extern void *text_poke(void *addr, const void *opcode, size_t len);
 extern void *text_poke_early(void *addr, const void *opcode, size_t len);
 
-#endif /* _ASM_X86_ALTERNATIVE_H */
+#endif /* ASM_X86__ALTERNATIVE_H */
diff --git a/include/asm-x86/amd_iommu.h b/include/asm-x86/amd_iommu.h
index 30a12049353b..783f43e58052 100644
--- a/include/asm-x86/amd_iommu.h
+++ b/include/asm-x86/amd_iommu.h
@@ -17,8 +17,8 @@
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
  */
 
-#ifndef _ASM_X86_AMD_IOMMU_H
-#define _ASM_X86_AMD_IOMMU_H
+#ifndef ASM_X86__AMD_IOMMU_H
+#define ASM_X86__AMD_IOMMU_H
 
 #ifdef CONFIG_AMD_IOMMU
 extern int amd_iommu_init(void);
@@ -29,4 +29,4 @@ static inline int amd_iommu_init(void) { return -ENODEV; }
 static inline void amd_iommu_detect(void) { }
 #endif
 
-#endif
+#endif /* ASM_X86__AMD_IOMMU_H */
diff --git a/include/asm-x86/amd_iommu_types.h b/include/asm-x86/amd_iommu_types.h
index 22aa58ca1991..1ffa4e53c989 100644
--- a/include/asm-x86/amd_iommu_types.h
+++ b/include/asm-x86/amd_iommu_types.h
@@ -17,8 +17,8 @@
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
  */
 
-#ifndef __AMD_IOMMU_TYPES_H__
-#define __AMD_IOMMU_TYPES_H__
+#ifndef ASM_X86__AMD_IOMMU_TYPES_H
+#define ASM_X86__AMD_IOMMU_TYPES_H
 
 #include <linux/types.h>
 #include <linux/list.h>
@@ -31,9 +31,6 @@
 #define ALIAS_TABLE_ENTRY_SIZE		2
 #define RLOOKUP_TABLE_ENTRY_SIZE	(sizeof(void *))
 
-/* helper macros */
-#define LOW_U32(x) ((x) & ((1ULL << 32)-1))
-
 /* Length of the MMIO region for the AMD IOMMU */
 #define MMIO_REGION_LENGTH       0x4000
 
@@ -69,6 +66,9 @@
 #define MMIO_EVT_TAIL_OFFSET	0x2018
 #define MMIO_STATUS_OFFSET	0x2020
 
+/* MMIO status bits */
+#define MMIO_STATUS_COM_WAIT_INT_MASK	0x04
+
 /* feature control bits */
 #define CONTROL_IOMMU_EN        0x00ULL
 #define CONTROL_HT_TUN_EN       0x01ULL
@@ -89,6 +89,7 @@
 #define CMD_INV_IOMMU_PAGES     0x03
 
 #define CMD_COMPL_WAIT_STORE_MASK	0x01
+#define CMD_COMPL_WAIT_INT_MASK		0x02
 #define CMD_INV_IOMMU_PAGES_SIZE_MASK	0x01
 #define CMD_INV_IOMMU_PAGES_PDE_MASK	0x02
 
@@ -99,6 +100,7 @@
 #define DEV_ENTRY_TRANSLATION   0x01
 #define DEV_ENTRY_IR            0x3d
 #define DEV_ENTRY_IW            0x3e
+#define DEV_ENTRY_NO_PAGE_FAULT	0x62
 #define DEV_ENTRY_EX            0x67
 #define DEV_ENTRY_SYSMGT1       0x68
 #define DEV_ENTRY_SYSMGT2       0x69
@@ -339,4 +341,4 @@ static inline u16 calc_devid(u8 bus, u8 devfn)
 	return (((u16)bus) << 8) | devfn;
 }
 
-#endif
+#endif /* ASM_X86__AMD_IOMMU_TYPES_H */
diff --git a/include/asm-x86/apic.h b/include/asm-x86/apic.h
index 133c998161ca..1311c82b165b 100644
--- a/include/asm-x86/apic.h
+++ b/include/asm-x86/apic.h
@@ -1,5 +1,5 @@
-#ifndef _ASM_X86_APIC_H
-#define _ASM_X86_APIC_H
+#ifndef ASM_X86__APIC_H
+#define ASM_X86__APIC_H
 
 #include <linux/pm.h>
 #include <linux/delay.h>
@@ -9,6 +9,8 @@
 #include <asm/apicdef.h>
 #include <asm/processor.h>
 #include <asm/system.h>
+#include <asm/cpufeature.h>
+#include <asm/msr.h>
 
 #define ARCH_APICTIMER_STOPS_ON_C3	1
 
@@ -47,15 +49,18 @@ extern int disable_apic;
 #ifdef CONFIG_PARAVIRT
 #include <asm/paravirt.h>
 #else
-#define apic_write native_apic_write
-#define apic_read native_apic_read
 #define setup_boot_clock setup_boot_APIC_clock
 #define setup_secondary_clock setup_secondary_APIC_clock
 #endif
 
 extern int is_vsmp_box(void);
+extern void xapic_wait_icr_idle(void);
+extern u32 safe_xapic_wait_icr_idle(void);
+extern u64 xapic_icr_read(void);
+extern void xapic_icr_write(u32, u32);
+extern int setup_profiling_timer(unsigned int);
 
-static inline void native_apic_write(unsigned long reg, u32 v)
+static inline void native_apic_mem_write(u32 reg, u32 v)
 {
 	volatile u32 *addr = (volatile u32 *)(APIC_BASE + reg);
 
@@ -64,15 +69,68 @@ static inline void native_apic_write(unsigned long reg, u32 v)
 		       ASM_OUTPUT2("0" (v), "m" (*addr)));
 }
 
-static inline u32 native_apic_read(unsigned long reg)
+static inline u32 native_apic_mem_read(u32 reg)
 {
 	return *((volatile u32 *)(APIC_BASE + reg));
 }
 
-extern void apic_wait_icr_idle(void);
-extern u32 safe_apic_wait_icr_idle(void);
+static inline void native_apic_msr_write(u32 reg, u32 v)
+{
+	if (reg == APIC_DFR || reg == APIC_ID || reg == APIC_LDR ||
+	    reg == APIC_LVR)
+		return;
+
+	wrmsr(APIC_BASE_MSR + (reg >> 4), v, 0);
+}
+
+static inline u32 native_apic_msr_read(u32 reg)
+{
+	u32 low, high;
+
+	if (reg == APIC_DFR)
+		return -1;
+
+	rdmsr(APIC_BASE_MSR + (reg >> 4), low, high);
+	return low;
+}
+
+#ifndef CONFIG_X86_32
+extern int x2apic, x2apic_preenabled;
+extern void check_x2apic(void);
+extern void enable_x2apic(void);
+extern void enable_IR_x2apic(void);
+extern void x2apic_icr_write(u32 low, u32 id);
+#endif
+
+struct apic_ops {
+	u32 (*read)(u32 reg);
+	void (*write)(u32 reg, u32 v);
+	u64 (*icr_read)(void);
+	void (*icr_write)(u32 low, u32 high);
+	void (*wait_icr_idle)(void);
+	u32 (*safe_wait_icr_idle)(void);
+};
+
+extern struct apic_ops *apic_ops;
+
+#define apic_read (apic_ops->read)
+#define apic_write (apic_ops->write)
+#define apic_icr_read (apic_ops->icr_read)
+#define apic_icr_write (apic_ops->icr_write)
+#define apic_wait_icr_idle (apic_ops->wait_icr_idle)
+#define safe_apic_wait_icr_idle (apic_ops->safe_wait_icr_idle)
+
 extern int get_physical_broadcast(void);
 
+#ifdef CONFIG_X86_64
+static inline void ack_x2APIC_irq(void)
+{
+	/* Docs say use 0 for future compatibility */
+	native_apic_msr_write(APIC_EOI, 0);
+}
+#endif
+
+
 static inline void ack_APIC_irq(void)
 {
 	/*
@@ -128,4 +186,4 @@ static inline void init_apic_mappings(void) { }
 
 #endif /* !CONFIG_X86_LOCAL_APIC */
 
-#endif /* __ASM_APIC_H */
+#endif /* ASM_X86__APIC_H */
diff --git a/include/asm-x86/apicdef.h b/include/asm-x86/apicdef.h
index 6b9008c78731..b922c85ac91d 100644
--- a/include/asm-x86/apicdef.h
+++ b/include/asm-x86/apicdef.h
@@ -1,5 +1,5 @@
-#ifndef _ASM_X86_APICDEF_H
-#define _ASM_X86_APICDEF_H
+#ifndef ASM_X86__APICDEF_H
+#define ASM_X86__APICDEF_H
 
 /*
  * Constants for various Intel APICs. (local APIC, IOAPIC, etc.)
@@ -105,6 +105,7 @@
 #define	APIC_TMICT	0x380
 #define	APIC_TMCCT	0x390
 #define	APIC_TDCR	0x3E0
+#define APIC_SELF_IPI	0x3F0
 #define		APIC_TDR_DIV_TMBASE	(1 << 2)
 #define		APIC_TDR_DIV_1		0xB
 #define		APIC_TDR_DIV_2		0x0
@@ -128,6 +129,8 @@
 #define	APIC_EILVT3     0x530
 
 #define APIC_BASE (fix_to_virt(FIX_APIC_BASE))
+#define APIC_BASE_MSR	0x800
+#define X2APIC_ENABLE	(1UL << 10)
 
 #ifdef CONFIG_X86_32
 # define MAX_IO_APICS 64
@@ -411,4 +414,4 @@ struct local_apic {
 #else
  #define BAD_APICID 0xFFFFu
 #endif
-#endif
+#endif /* ASM_X86__APICDEF_H */
diff --git a/include/asm-x86/arch_hooks.h b/include/asm-x86/arch_hooks.h
index 8411750ceb63..de4596b24c23 100644
--- a/include/asm-x86/arch_hooks.h
+++ b/include/asm-x86/arch_hooks.h
@@ -1,5 +1,5 @@
-#ifndef _ASM_ARCH_HOOKS_H
-#define _ASM_ARCH_HOOKS_H
+#ifndef ASM_X86__ARCH_HOOKS_H
+#define ASM_X86__ARCH_HOOKS_H
 
 #include <linux/interrupt.h>
 
@@ -12,8 +12,6 @@
 /* these aren't arch hooks, they are generic routines
  * that can be used by the hooks */
 extern void init_ISA_irqs(void);
-extern void apic_intr_init(void);
-extern void smp_intr_init(void);
 extern irqreturn_t timer_interrupt(int irq, void *dev_id);
 
 /* these are the defined hooks */
@@ -25,4 +23,4 @@ extern void pre_time_init_hook(void);
 extern void time_init_hook(void);
 extern void mca_nmi_hook(void);
 
-#endif
+#endif /* ASM_X86__ARCH_HOOKS_H */
diff --git a/include/asm-x86/asm.h b/include/asm-x86/asm.h
index 97220321f39d..2439ae49e8ac 100644
--- a/include/asm-x86/asm.h
+++ b/include/asm-x86/asm.h
@@ -1,5 +1,5 @@
-#ifndef _ASM_X86_ASM_H
-#define _ASM_X86_ASM_H
+#ifndef ASM_X86__ASM_H
+#define ASM_X86__ASM_H
 
 #ifdef __ASSEMBLY__
 # define __ASM_FORM(x)	x
@@ -39,4 +39,4 @@
 	_ASM_PTR #from "," #to "\n" \
 	" .previous\n"
 
-#endif /* _ASM_X86_ASM_H */
+#endif /* ASM_X86__ASM_H */
diff --git a/include/asm-x86/atomic_32.h b/include/asm-x86/atomic_32.h
index 21a4825148c0..14d3f0beb889 100644
--- a/include/asm-x86/atomic_32.h
+++ b/include/asm-x86/atomic_32.h
@@ -1,5 +1,5 @@
-#ifndef __ARCH_I386_ATOMIC__
-#define __ARCH_I386_ATOMIC__
+#ifndef ASM_X86__ATOMIC_32_H
+#define ASM_X86__ATOMIC_32_H
 
 #include <linux/compiler.h>
 #include <asm/processor.h>
@@ -256,4 +256,4 @@ static inline int atomic_add_unless(atomic_t *v, int a, int u)
 #define smp_mb__after_atomic_inc()	barrier()
 
 #include <asm-generic/atomic.h>
-#endif
+#endif /* ASM_X86__ATOMIC_32_H */
diff --git a/include/asm-x86/atomic_64.h b/include/asm-x86/atomic_64.h
index a0095191c02e..2cb218c4a356 100644
--- a/include/asm-x86/atomic_64.h
+++ b/include/asm-x86/atomic_64.h
@@ -1,5 +1,5 @@
-#ifndef __ARCH_X86_64_ATOMIC__
-#define __ARCH_X86_64_ATOMIC__
+#ifndef ASM_X86__ATOMIC_64_H
+#define ASM_X86__ATOMIC_64_H
 
 #include <asm/alternative.h>
 #include <asm/cmpxchg.h>
@@ -228,7 +228,7 @@ static inline void atomic64_add(long i, atomic64_t *v)
 {
 	asm volatile(LOCK_PREFIX "addq %1,%0"
 		     : "=m" (v->counter)
-		     : "ir" (i), "m" (v->counter));
+		     : "er" (i), "m" (v->counter));
 }
 
 /**
@@ -242,7 +242,7 @@ static inline void atomic64_sub(long i, atomic64_t *v)
 {
 	asm volatile(LOCK_PREFIX "subq %1,%0"
 		     : "=m" (v->counter)
-		     : "ir" (i), "m" (v->counter));
+		     : "er" (i), "m" (v->counter));
 }
 
 /**
@@ -260,7 +260,7 @@ static inline int atomic64_sub_and_test(long i, atomic64_t *v)
 
 	asm volatile(LOCK_PREFIX "subq %2,%0; sete %1"
 		     : "=m" (v->counter), "=qm" (c)
-		     : "ir" (i), "m" (v->counter) : "memory");
+		     : "er" (i), "m" (v->counter) : "memory");
 	return c;
 }
 
@@ -341,7 +341,7 @@ static inline int atomic64_add_negative(long i, atomic64_t *v)
 
 	asm volatile(LOCK_PREFIX "addq %2,%0; sets %1"
 		     : "=m" (v->counter), "=qm" (c)
-		     : "ir" (i), "m" (v->counter) : "memory");
+		     : "er" (i), "m" (v->counter) : "memory");
 	return c;
 }
 
@@ -470,4 +470,4 @@ static inline void atomic_or_long(unsigned long *v1, unsigned long v2)
 #define smp_mb__after_atomic_inc()	barrier()
 
 #include <asm-generic/atomic.h>
-#endif
+#endif /* ASM_X86__ATOMIC_64_H */
diff --git a/include/asm-x86/auxvec.h b/include/asm-x86/auxvec.h
index 87f5e6d5a020..12c7cac74202 100644
--- a/include/asm-x86/auxvec.h
+++ b/include/asm-x86/auxvec.h
@@ -1,5 +1,5 @@
-#ifndef _ASM_X86_AUXVEC_H
-#define _ASM_X86_AUXVEC_H
+#ifndef ASM_X86__AUXVEC_H
+#define ASM_X86__AUXVEC_H
 /*
  * Architecture-neutral AT_ values in 0-17, leave some room
  * for more of them, start the x86-specific ones at 32.
@@ -9,4 +9,4 @@
 #endif
 #define AT_SYSINFO_EHDR		33
 
-#endif
+#endif /* ASM_X86__AUXVEC_H */
diff --git a/include/asm-x86/bigsmp/apic.h b/include/asm-x86/bigsmp/apic.h
new file mode 100644
index 000000000000..0a9cd7c5ca0c
--- /dev/null
+++ b/include/asm-x86/bigsmp/apic.h
@@ -0,0 +1,144 @@
+#ifndef __ASM_MACH_APIC_H
+#define __ASM_MACH_APIC_H
+
+#define xapic_phys_to_log_apicid(cpu) (per_cpu(x86_bios_cpu_apicid, cpu))
+#define esr_disable (1)
+
+static inline int apic_id_registered(void)
+{
+	return (1);
+}
+
+/* Round robin the irqs amoung the online cpus */
+static inline cpumask_t target_cpus(void)
+{
+	static unsigned long cpu = NR_CPUS;
+	do {
+		if (cpu >= NR_CPUS)
+			cpu = first_cpu(cpu_online_map);
+		else
+			cpu = next_cpu(cpu, cpu_online_map);
+	} while (cpu >= NR_CPUS);
+	return cpumask_of_cpu(cpu);
+}
+
+#undef APIC_DEST_LOGICAL
+#define APIC_DEST_LOGICAL	0
+#define TARGET_CPUS		(target_cpus())
+#define APIC_DFR_VALUE		(APIC_DFR_FLAT)
+#define INT_DELIVERY_MODE	(dest_Fixed)
+#define INT_DEST_MODE		(0)    /* phys delivery to target proc */
+#define NO_BALANCE_IRQ		(0)
+#define WAKE_SECONDARY_VIA_INIT
+
+
+static inline unsigned long check_apicid_used(physid_mask_t bitmap, int apicid)
+{
+	return (0);
+}
+
+static inline unsigned long check_apicid_present(int bit)
+{
+	return (1);
+}
+
+static inline unsigned long calculate_ldr(int cpu)
+{
+	unsigned long val, id;
+	val = apic_read(APIC_LDR) & ~APIC_LDR_MASK;
+	id = xapic_phys_to_log_apicid(cpu);
+	val |= SET_APIC_LOGICAL_ID(id);
+	return val;
+}
+
+/*
+ * Set up the logical destination ID.
+ *
+ * Intel recommends to set DFR, LDR and TPR before enabling
+ * an APIC.  See e.g. "AP-388 82489DX User's Manual" (Intel
+ * document number 292116).  So here it goes...
+ */
+static inline void init_apic_ldr(void)
+{
+	unsigned long val;
+	int cpu = smp_processor_id();
+
+	apic_write(APIC_DFR, APIC_DFR_VALUE);
+	val = calculate_ldr(cpu);
+	apic_write(APIC_LDR, val);
+}
+
+static inline void setup_apic_routing(void)
+{
+	printk("Enabling APIC mode:  %s.  Using %d I/O APICs\n",
+		"Physflat", nr_ioapics);
+}
+
+static inline int multi_timer_check(int apic, int irq)
+{
+	return (0);
+}
+
+static inline int apicid_to_node(int logical_apicid)
+{
+	return apicid_2_node[hard_smp_processor_id()];
+}
+
+static inline int cpu_present_to_apicid(int mps_cpu)
+{
+	if (mps_cpu < NR_CPUS)
+		return (int) per_cpu(x86_bios_cpu_apicid, mps_cpu);
+
+	return BAD_APICID;
+}
+
+static inline physid_mask_t apicid_to_cpu_present(int phys_apicid)
+{
+	return physid_mask_of_physid(phys_apicid);
+}
+
+extern u8 cpu_2_logical_apicid[];
+/* Mapping from cpu number to logical apicid */
+static inline int cpu_to_logical_apicid(int cpu)
+{
+	if (cpu >= NR_CPUS)
+		return BAD_APICID;
+	return cpu_physical_id(cpu);
+}
+
+static inline physid_mask_t ioapic_phys_id_map(physid_mask_t phys_map)
+{
+	/* For clustered we don't have a good way to do this yet - hack */
+	return physids_promote(0xFFL);
+}
+
+static inline void setup_portio_remap(void)
+{
+}
+
+static inline void enable_apic_mode(void)
+{
+}
+
+static inline int check_phys_apicid_present(int boot_cpu_physical_apicid)
+{
+	return (1);
+}
+
+/* As we are using single CPU as destination, pick only one CPU here */
+static inline unsigned int cpu_mask_to_apicid(cpumask_t cpumask)
+{
+	int cpu;
+	int apicid;	
+
+	cpu = first_cpu(cpumask);
+	apicid = cpu_to_logical_apicid(cpu);
+	return apicid;
+}
+
+static inline u32 phys_pkg_id(u32 cpuid_apic, int index_msb)
+{
+	return cpuid_apic >> index_msb;
+}
+
+#endif /* __ASM_MACH_APIC_H */
diff --git a/include/asm-x86/bigsmp/apicdef.h b/include/asm-x86/bigsmp/apicdef.h
new file mode 100644
index 000000000000..392c3f5ef2fe
--- /dev/null
+++ b/include/asm-x86/bigsmp/apicdef.h
@@ -0,0 +1,13 @@
+#ifndef __ASM_MACH_APICDEF_H
+#define __ASM_MACH_APICDEF_H
+
+#define		APIC_ID_MASK		(0xFF<<24)
+
+static inline unsigned get_apic_id(unsigned long x)
+{
+	return (((x)>>24)&0xFF);
+}
+
+#define		GET_APIC_ID(x)	get_apic_id(x)
+
+#endif
diff --git a/include/asm-x86/mach-bigsmp/mach_ipi.h b/include/asm-x86/bigsmp/ipi.h
index 9404c535b7ec..9404c535b7ec 100644
--- a/include/asm-x86/mach-bigsmp/mach_ipi.h
+++ b/include/asm-x86/bigsmp/ipi.h
diff --git a/include/asm-x86/bios_ebda.h b/include/asm-x86/bios_ebda.h
index 0033e50c13b2..ec42ed874591 100644
--- a/include/asm-x86/bios_ebda.h
+++ b/include/asm-x86/bios_ebda.h
@@ -1,5 +1,5 @@
-#ifndef _MACH_BIOS_EBDA_H
-#define _MACH_BIOS_EBDA_H
+#ifndef ASM_X86__BIOS_EBDA_H
+#define ASM_X86__BIOS_EBDA_H
 
 #include <asm/io.h>
 
@@ -16,4 +16,4 @@ static inline unsigned int get_bios_ebda(void)
 
 void reserve_ebda_region(void);
 
-#endif /* _MACH_BIOS_EBDA_H */
+#endif /* ASM_X86__BIOS_EBDA_H */
diff --git a/include/asm-x86/bitops.h b/include/asm-x86/bitops.h
index cfb2b64f76e7..61989b93b475 100644
--- a/include/asm-x86/bitops.h
+++ b/include/asm-x86/bitops.h
@@ -1,5 +1,5 @@
-#ifndef _ASM_X86_BITOPS_H
-#define _ASM_X86_BITOPS_H
+#ifndef ASM_X86__BITOPS_H
+#define ASM_X86__BITOPS_H
 
 /*
  * Copyright 1992, Linus Torvalds.
@@ -458,4 +458,4 @@ static inline void set_bit_string(unsigned long *bitmap,
 #include <asm-generic/bitops/minix.h>
 
 #endif /* __KERNEL__ */
-#endif	/* _ASM_X86_BITOPS_H */
+#endif /* ASM_X86__BITOPS_H */
diff --git a/include/asm-x86/boot.h b/include/asm-x86/boot.h
index 2faed7ecb092..825de5dc867c 100644
--- a/include/asm-x86/boot.h
+++ b/include/asm-x86/boot.h
@@ -1,5 +1,5 @@
-#ifndef _ASM_BOOT_H
-#define _ASM_BOOT_H
+#ifndef ASM_X86__BOOT_H
+#define ASM_X86__BOOT_H
 
 /* Don't touch these, unless you really know what you're doing. */
 #define DEF_INITSEG	0x9000
@@ -25,4 +25,4 @@
 #define BOOT_STACK_SIZE	0x1000
 #endif
 
-#endif /* _ASM_BOOT_H */
+#endif /* ASM_X86__BOOT_H */
diff --git a/include/asm-x86/bootparam.h b/include/asm-x86/bootparam.h
index ae22bdf0ab14..ccf027e2d97d 100644
--- a/include/asm-x86/bootparam.h
+++ b/include/asm-x86/bootparam.h
@@ -1,5 +1,5 @@
-#ifndef _ASM_BOOTPARAM_H
-#define _ASM_BOOTPARAM_H
+#ifndef ASM_X86__BOOTPARAM_H
+#define ASM_X86__BOOTPARAM_H
 
 #include <linux/types.h>
 #include <linux/screen_info.h>
@@ -108,4 +108,4 @@ struct boot_params {
 	__u8  _pad9[276];				/* 0xeec */
 } __attribute__((packed));
 
-#endif /* _ASM_BOOTPARAM_H */
+#endif /* ASM_X86__BOOTPARAM_H */
diff --git a/include/asm-x86/bug.h b/include/asm-x86/bug.h
index b69aa64b82a4..91ad43a54c47 100644
--- a/include/asm-x86/bug.h
+++ b/include/asm-x86/bug.h
@@ -1,5 +1,5 @@
-#ifndef _ASM_X86_BUG_H
-#define _ASM_X86_BUG_H
+#ifndef ASM_X86__BUG_H
+#define ASM_X86__BUG_H
 
 #ifdef CONFIG_BUG
 #define HAVE_ARCH_BUG
@@ -36,4 +36,4 @@ do {								\
 #endif /* !CONFIG_BUG */
 
 #include <asm-generic/bug.h>
-#endif
+#endif /* ASM_X86__BUG_H */
diff --git a/include/asm-x86/bugs.h b/include/asm-x86/bugs.h
index 021cbdd5f258..ae514c76a96f 100644
--- a/include/asm-x86/bugs.h
+++ b/include/asm-x86/bugs.h
@@ -1,7 +1,12 @@
-#ifndef _ASM_X86_BUGS_H
-#define _ASM_X86_BUGS_H
+#ifndef ASM_X86__BUGS_H
+#define ASM_X86__BUGS_H
 
 extern void check_bugs(void);
+
+#ifdef CONFIG_CPU_SUP_INTEL_32
 int ppro_with_ram_bug(void);
+#else
+static inline int ppro_with_ram_bug(void) { return 0; }
+#endif
 
-#endif /* _ASM_X86_BUGS_H */
+#endif /* ASM_X86__BUGS_H */
diff --git a/include/asm-x86/byteorder.h b/include/asm-x86/byteorder.h
index e02ae2d89acf..722f27d68105 100644
--- a/include/asm-x86/byteorder.h
+++ b/include/asm-x86/byteorder.h
@@ -1,5 +1,5 @@
-#ifndef _ASM_X86_BYTEORDER_H
-#define _ASM_X86_BYTEORDER_H
+#ifndef ASM_X86__BYTEORDER_H
+#define ASM_X86__BYTEORDER_H
 
 #include <asm/types.h>
 #include <linux/compiler.h>
@@ -78,4 +78,4 @@ static inline __attribute_const__ __u32 ___arch__swab32(__u32 x)
 
 #include <linux/byteorder/little_endian.h>
 
-#endif /* _ASM_X86_BYTEORDER_H */
+#endif /* ASM_X86__BYTEORDER_H */
diff --git a/include/asm-x86/cache.h b/include/asm-x86/cache.h
index 1e0bac86f38f..ea3f1cc06a97 100644
--- a/include/asm-x86/cache.h
+++ b/include/asm-x86/cache.h
@@ -1,5 +1,5 @@
-#ifndef _ARCH_X86_CACHE_H
-#define _ARCH_X86_CACHE_H
+#ifndef ASM_X86__CACHE_H
+#define ASM_X86__CACHE_H
 
 /* L1 cache line size */
 #define L1_CACHE_SHIFT	(CONFIG_X86_L1_CACHE_SHIFT)
@@ -17,4 +17,4 @@
 #endif
 #endif
 
-#endif
+#endif /* ASM_X86__CACHE_H */
diff --git a/include/asm-x86/cacheflush.h b/include/asm-x86/cacheflush.h
index f4c0ab50d2c2..59859cb28a36 100644
--- a/include/asm-x86/cacheflush.h
+++ b/include/asm-x86/cacheflush.h
@@ -1,5 +1,5 @@
-#ifndef _ASM_X86_CACHEFLUSH_H
-#define _ASM_X86_CACHEFLUSH_H
+#ifndef ASM_X86__CACHEFLUSH_H
+#define ASM_X86__CACHEFLUSH_H
 
 /* Keep includes the same across arches.  */
 #include <linux/mm.h>
@@ -112,4 +112,4 @@ static inline int rodata_test(void)
 }
 #endif
 
-#endif
+#endif /* ASM_X86__CACHEFLUSH_H */
diff --git a/include/asm-x86/calgary.h b/include/asm-x86/calgary.h
index 67f60406e2d8..933fd272f826 100644
--- a/include/asm-x86/calgary.h
+++ b/include/asm-x86/calgary.h
@@ -21,8 +21,8 @@
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
  */
 
-#ifndef _ASM_X86_64_CALGARY_H
-#define _ASM_X86_64_CALGARY_H
+#ifndef ASM_X86__CALGARY_H
+#define ASM_X86__CALGARY_H
 
 #include <linux/spinlock.h>
 #include <linux/device.h>
@@ -69,4 +69,4 @@ static inline int calgary_iommu_init(void) { return 1; }
 static inline void detect_calgary(void) { return; }
 #endif
 
-#endif /* _ASM_X86_64_CALGARY_H */
+#endif /* ASM_X86__CALGARY_H */
diff --git a/include/asm-x86/checksum_32.h b/include/asm-x86/checksum_32.h
index 52bbb0d8c4c1..d041e8cda227 100644
--- a/include/asm-x86/checksum_32.h
+++ b/include/asm-x86/checksum_32.h
@@ -1,5 +1,5 @@
-#ifndef _I386_CHECKSUM_H
-#define _I386_CHECKSUM_H
+#ifndef ASM_X86__CHECKSUM_32_H
+#define ASM_X86__CHECKSUM_32_H
 
 #include <linux/in6.h>
 
@@ -186,4 +186,4 @@ static inline __wsum csum_and_copy_to_user(const void *src,
 	return (__force __wsum)-1; /* invalid checksum */
 }
 
-#endif
+#endif /* ASM_X86__CHECKSUM_32_H */
diff --git a/include/asm-x86/checksum_64.h b/include/asm-x86/checksum_64.h
index 8bd861cc5267..110f403beb89 100644
--- a/include/asm-x86/checksum_64.h
+++ b/include/asm-x86/checksum_64.h
@@ -1,5 +1,5 @@
-#ifndef _X86_64_CHECKSUM_H
-#define _X86_64_CHECKSUM_H
+#ifndef ASM_X86__CHECKSUM_64_H
+#define ASM_X86__CHECKSUM_64_H
 
 /*
  * Checksums for x86-64
@@ -188,4 +188,4 @@ static inline unsigned add32_with_carry(unsigned a, unsigned b)
 	return a;
 }
 
-#endif
+#endif /* ASM_X86__CHECKSUM_64_H */
diff --git a/include/asm-x86/cmpxchg_32.h b/include/asm-x86/cmpxchg_32.h
index bf5a69d1329e..0622e45cdf7c 100644
--- a/include/asm-x86/cmpxchg_32.h
+++ b/include/asm-x86/cmpxchg_32.h
@@ -1,5 +1,5 @@
-#ifndef __ASM_CMPXCHG_H
-#define __ASM_CMPXCHG_H
+#ifndef ASM_X86__CMPXCHG_32_H
+#define ASM_X86__CMPXCHG_32_H
 
 #include <linux/bitops.h> /* for LOCK_PREFIX */
 
@@ -341,4 +341,4 @@ extern unsigned long long cmpxchg_486_u64(volatile void *, u64, u64);
 
 #endif
 
-#endif
+#endif /* ASM_X86__CMPXCHG_32_H */
diff --git a/include/asm-x86/cmpxchg_64.h b/include/asm-x86/cmpxchg_64.h
index 17463ccf8166..63c1a5e61b99 100644
--- a/include/asm-x86/cmpxchg_64.h
+++ b/include/asm-x86/cmpxchg_64.h
@@ -1,5 +1,5 @@
-#ifndef __ASM_CMPXCHG_H
-#define __ASM_CMPXCHG_H
+#ifndef ASM_X86__CMPXCHG_64_H
+#define ASM_X86__CMPXCHG_64_H
 
 #include <asm/alternative.h> /* Provides LOCK_PREFIX */
 
@@ -182,4 +182,4 @@ static inline unsigned long __cmpxchg_local(volatile void *ptr,
 	cmpxchg_local((ptr), (o), (n));					\
 })
 
-#endif
+#endif /* ASM_X86__CMPXCHG_64_H */
diff --git a/include/asm-x86/compat.h b/include/asm-x86/compat.h
index 1793ac317a30..6732b150949e 100644
--- a/include/asm-x86/compat.h
+++ b/include/asm-x86/compat.h
@@ -1,5 +1,5 @@
-#ifndef _ASM_X86_64_COMPAT_H
-#define _ASM_X86_64_COMPAT_H
+#ifndef ASM_X86__COMPAT_H
+#define ASM_X86__COMPAT_H
 
 /*
  * Architecture specific compatibility types
@@ -215,4 +215,4 @@ static inline int is_compat_task(void)
 	return current_thread_info()->status & TS_COMPAT;
 }
 
-#endif /* _ASM_X86_64_COMPAT_H */
+#endif /* ASM_X86__COMPAT_H */
diff --git a/include/asm-x86/cpu.h b/include/asm-x86/cpu.h
index 73f2ea84fd74..83a115083f0d 100644
--- a/include/asm-x86/cpu.h
+++ b/include/asm-x86/cpu.h
@@ -1,5 +1,5 @@
-#ifndef _ASM_I386_CPU_H_
-#define _ASM_I386_CPU_H_
+#ifndef ASM_X86__CPU_H
+#define ASM_X86__CPU_H
 
 #include <linux/device.h>
 #include <linux/cpu.h>
@@ -17,4 +17,4 @@ extern void arch_unregister_cpu(int);
 #endif
 
 DECLARE_PER_CPU(int, cpu_state);
-#endif /* _ASM_I386_CPU_H_ */
+#endif /* ASM_X86__CPU_H */
diff --git a/include/asm-x86/cpufeature.h b/include/asm-x86/cpufeature.h
index 2f5a792b0acc..7ac4d93d20ed 100644
--- a/include/asm-x86/cpufeature.h
+++ b/include/asm-x86/cpufeature.h
@@ -1,20 +1,26 @@
 /*
  * Defines x86 CPU feature bits
  */
-#ifndef _ASM_X86_CPUFEATURE_H
-#define _ASM_X86_CPUFEATURE_H
+#ifndef ASM_X86__CPUFEATURE_H
+#define ASM_X86__CPUFEATURE_H
 
 #include <asm/required-features.h>
 
 #define NCAPINTS	8	/* N 32-bit words worth of info */
 
+/*
+ * Note: If the comment begins with a quoted string, that string is used
+ * in /proc/cpuinfo instead of the macro name.  If the string is "",
+ * this feature bit is not displayed in /proc/cpuinfo at all.
+ */
+
 /* Intel-defined CPU features, CPUID level 0x00000001 (edx), word 0 */
 #define X86_FEATURE_FPU		(0*32+ 0) /* Onboard FPU */
 #define X86_FEATURE_VME		(0*32+ 1) /* Virtual Mode Extensions */
 #define X86_FEATURE_DE		(0*32+ 2) /* Debugging Extensions */
 #define X86_FEATURE_PSE		(0*32+ 3) /* Page Size Extensions */
 #define X86_FEATURE_TSC		(0*32+ 4) /* Time Stamp Counter */
-#define X86_FEATURE_MSR		(0*32+ 5) /* Model-Specific Registers, RDMSR, WRMSR */
+#define X86_FEATURE_MSR		(0*32+ 5) /* Model-Specific Registers */
 #define X86_FEATURE_PAE		(0*32+ 6) /* Physical Address Extensions */
 #define X86_FEATURE_MCE		(0*32+ 7) /* Machine Check Architecture */
 #define X86_FEATURE_CX8		(0*32+ 8) /* CMPXCHG8 instruction */
@@ -23,22 +29,23 @@
 #define X86_FEATURE_MTRR	(0*32+12) /* Memory Type Range Registers */
 #define X86_FEATURE_PGE		(0*32+13) /* Page Global Enable */
 #define X86_FEATURE_MCA		(0*32+14) /* Machine Check Architecture */
-#define X86_FEATURE_CMOV	(0*32+15) /* CMOV instruction (FCMOVCC and FCOMI too if FPU present) */
+#define X86_FEATURE_CMOV	(0*32+15) /* CMOV instructions */
+					  /* (plus FCMOVcc, FCOMI with FPU) */
 #define X86_FEATURE_PAT		(0*32+16) /* Page Attribute Table */
 #define X86_FEATURE_PSE36	(0*32+17) /* 36-bit PSEs */
 #define X86_FEATURE_PN		(0*32+18) /* Processor serial number */
-#define X86_FEATURE_CLFLSH	(0*32+19) /* Supports the CLFLUSH instruction */
-#define X86_FEATURE_DS		(0*32+21) /* Debug Store */
+#define X86_FEATURE_CLFLSH	(0*32+19) /* "clflush" CLFLUSH instruction */
+#define X86_FEATURE_DS		(0*32+21) /* "dts" Debug Store */
 #define X86_FEATURE_ACPI	(0*32+22) /* ACPI via MSR */
 #define X86_FEATURE_MMX		(0*32+23) /* Multimedia Extensions */
-#define X86_FEATURE_FXSR	(0*32+24) /* FXSAVE and FXRSTOR instructions (fast save and restore */
-					  /* of FPU context), and CR4.OSFXSR available */
-#define X86_FEATURE_XMM		(0*32+25) /* Streaming SIMD Extensions */
-#define X86_FEATURE_XMM2	(0*32+26) /* Streaming SIMD Extensions-2 */
-#define X86_FEATURE_SELFSNOOP	(0*32+27) /* CPU self snoop */
+#define X86_FEATURE_FXSR	(0*32+24) /* FXSAVE/FXRSTOR, CR4.OSFXSR */
+#define X86_FEATURE_XMM		(0*32+25) /* "sse" */
+#define X86_FEATURE_XMM2	(0*32+26) /* "sse2" */
+#define X86_FEATURE_SELFSNOOP	(0*32+27) /* "ss" CPU self snoop */
 #define X86_FEATURE_HT		(0*32+28) /* Hyper-Threading */
-#define X86_FEATURE_ACC		(0*32+29) /* Automatic clock control */
+#define X86_FEATURE_ACC		(0*32+29) /* "tm" Automatic clock control */
 #define X86_FEATURE_IA64	(0*32+30) /* IA-64 processor */
+#define X86_FEATURE_PBE		(0*32+31) /* Pending Break Enable */
 
 /* AMD-defined CPU features, CPUID level 0x80000001, word 1 */
 /* Don't duplicate feature flags which are redundant with Intel! */
@@ -46,7 +53,8 @@
 #define X86_FEATURE_MP		(1*32+19) /* MP Capable. */
 #define X86_FEATURE_NX		(1*32+20) /* Execute Disable */
 #define X86_FEATURE_MMXEXT	(1*32+22) /* AMD MMX extensions */
-#define X86_FEATURE_GBPAGES	(1*32+26) /* GB pages */
+#define X86_FEATURE_FXSR_OPT	(1*32+25) /* FXSAVE/FXRSTOR optimizations */
+#define X86_FEATURE_GBPAGES	(1*32+26) /* "pdpe1gb" GB pages */
 #define X86_FEATURE_RDTSCP	(1*32+27) /* RDTSCP */
 #define X86_FEATURE_LM		(1*32+29) /* Long Mode (x86-64) */
 #define X86_FEATURE_3DNOWEXT	(1*32+30) /* AMD 3DNow! extensions */
@@ -64,50 +72,77 @@
 #define X86_FEATURE_CYRIX_ARR	(3*32+ 2) /* Cyrix ARRs (= MTRRs) */
 #define X86_FEATURE_CENTAUR_MCR	(3*32+ 3) /* Centaur MCRs (= MTRRs) */
 /* cpu types for specific tunings: */
-#define X86_FEATURE_K8		(3*32+ 4) /* Opteron, Athlon64 */
-#define X86_FEATURE_K7		(3*32+ 5) /* Athlon */
-#define X86_FEATURE_P3		(3*32+ 6) /* P3 */
-#define X86_FEATURE_P4		(3*32+ 7) /* P4 */
+#define X86_FEATURE_K8		(3*32+ 4) /* "" Opteron, Athlon64 */
+#define X86_FEATURE_K7		(3*32+ 5) /* "" Athlon */
+#define X86_FEATURE_P3		(3*32+ 6) /* "" P3 */
+#define X86_FEATURE_P4		(3*32+ 7) /* "" P4 */
 #define X86_FEATURE_CONSTANT_TSC (3*32+ 8) /* TSC ticks at a constant rate */
 #define X86_FEATURE_UP		(3*32+ 9) /* smp kernel running on up */
-#define X86_FEATURE_FXSAVE_LEAK (3*32+10) /* FXSAVE leaks FOP/FIP/FOP */
+#define X86_FEATURE_FXSAVE_LEAK (3*32+10) /* "" FXSAVE leaks FOP/FIP/FOP */
 #define X86_FEATURE_ARCH_PERFMON (3*32+11) /* Intel Architectural PerfMon */
-#define X86_FEATURE_PEBS	(3*32+12)  /* Precise-Event Based Sampling */
-#define X86_FEATURE_BTS		(3*32+13)  /* Branch Trace Store */
-#define X86_FEATURE_SYSCALL32	(3*32+14)  /* syscall in ia32 userspace */
-#define X86_FEATURE_SYSENTER32	(3*32+15)  /* sysenter in ia32 userspace */
-#define X86_FEATURE_REP_GOOD	(3*32+16) /* rep microcode works well on this CPU */
-#define X86_FEATURE_MFENCE_RDTSC (3*32+17) /* Mfence synchronizes RDTSC */
-#define X86_FEATURE_LFENCE_RDTSC (3*32+18) /* Lfence synchronizes RDTSC */
-#define X86_FEATURE_11AP	(3*32+19)  /* Bad local APIC aka 11AP */
+#define X86_FEATURE_PEBS	(3*32+12) /* Precise-Event Based Sampling */
+#define X86_FEATURE_BTS		(3*32+13) /* Branch Trace Store */
+#define X86_FEATURE_SYSCALL32	(3*32+14) /* "" syscall in ia32 userspace */
+#define X86_FEATURE_SYSENTER32	(3*32+15) /* "" sysenter in ia32 userspace */
+#define X86_FEATURE_REP_GOOD	(3*32+16) /* rep microcode works well */
+#define X86_FEATURE_MFENCE_RDTSC (3*32+17) /* "" Mfence synchronizes RDTSC */
+#define X86_FEATURE_LFENCE_RDTSC (3*32+18) /* "" Lfence synchronizes RDTSC */
+#define X86_FEATURE_11AP	(3*32+19) /* "" Bad local APIC aka 11AP */
+#define X86_FEATURE_NOPL	(3*32+20) /* The NOPL (0F 1F) instructions */
+#define X86_FEATURE_XTOPOLOGY	(3*32+21) /* cpu topology enum extensions */
 
 /* Intel-defined CPU features, CPUID level 0x00000001 (ecx), word 4 */
-#define X86_FEATURE_XMM3	(4*32+ 0) /* Streaming SIMD Extensions-3 */
-#define X86_FEATURE_MWAIT	(4*32+ 3) /* Monitor/Mwait support */
-#define X86_FEATURE_DSCPL	(4*32+ 4) /* CPL Qualified Debug Store */
+#define X86_FEATURE_XMM3	(4*32+ 0) /* "pni" SSE-3 */
+#define X86_FEATURE_PCLMULQDQ	(4*32+ 1) /* PCLMULQDQ instruction */
+#define X86_FEATURE_DTES64	(4*32+ 2) /* 64-bit Debug Store */
+#define X86_FEATURE_MWAIT	(4*32+ 3) /* "monitor" Monitor/Mwait support */
+#define X86_FEATURE_DSCPL	(4*32+ 4) /* "ds_cpl" CPL Qual. Debug Store */
+#define X86_FEATURE_VMX		(4*32+ 5) /* Hardware virtualization */
+#define X86_FEATURE_SMX		(4*32+ 6) /* Safer mode */
 #define X86_FEATURE_EST		(4*32+ 7) /* Enhanced SpeedStep */
 #define X86_FEATURE_TM2		(4*32+ 8) /* Thermal Monitor 2 */
+#define X86_FEATURE_SSSE3	(4*32+ 9) /* Supplemental SSE-3 */
 #define X86_FEATURE_CID		(4*32+10) /* Context ID */
+#define X86_FEATURE_FMA		(4*32+12) /* Fused multiply-add */
 #define X86_FEATURE_CX16	(4*32+13) /* CMPXCHG16B */
 #define X86_FEATURE_XTPR	(4*32+14) /* Send Task Priority Messages */
+#define X86_FEATURE_PDCM	(4*32+15) /* Performance Capabilities */
 #define X86_FEATURE_DCA		(4*32+18) /* Direct Cache Access */
+#define X86_FEATURE_XMM4_1	(4*32+19) /* "sse4_1" SSE-4.1 */
+#define X86_FEATURE_XMM4_2	(4*32+20) /* "sse4_2" SSE-4.2 */
+#define X86_FEATURE_X2APIC	(4*32+21) /* x2APIC */
+#define X86_FEATURE_AES		(4*32+25) /* AES instructions */
+#define X86_FEATURE_XSAVE	(4*32+26) /* XSAVE/XRSTOR/XSETBV/XGETBV */
+#define X86_FEATURE_OSXSAVE	(4*32+27) /* "" XSAVE enabled in the OS */
+#define X86_FEATURE_AVX		(4*32+28) /* Advanced Vector Extensions */
 
 /* VIA/Cyrix/Centaur-defined CPU features, CPUID level 0xC0000001, word 5 */
-#define X86_FEATURE_XSTORE	(5*32+ 2) /* on-CPU RNG present (xstore insn) */
-#define X86_FEATURE_XSTORE_EN	(5*32+ 3) /* on-CPU RNG enabled */
-#define X86_FEATURE_XCRYPT	(5*32+ 6) /* on-CPU crypto (xcrypt insn) */
-#define X86_FEATURE_XCRYPT_EN	(5*32+ 7) /* on-CPU crypto enabled */
+#define X86_FEATURE_XSTORE	(5*32+ 2) /* "rng" RNG present (xstore) */
+#define X86_FEATURE_XSTORE_EN	(5*32+ 3) /* "rng_en" RNG enabled */
+#define X86_FEATURE_XCRYPT	(5*32+ 6) /* "ace" on-CPU crypto (xcrypt) */
+#define X86_FEATURE_XCRYPT_EN	(5*32+ 7) /* "ace_en" on-CPU crypto enabled */
 #define X86_FEATURE_ACE2	(5*32+ 8) /* Advanced Cryptography Engine v2 */
 #define X86_FEATURE_ACE2_EN	(5*32+ 9) /* ACE v2 enabled */
-#define X86_FEATURE_PHE		(5*32+ 10) /* PadLock Hash Engine */
-#define X86_FEATURE_PHE_EN	(5*32+ 11) /* PHE enabled */
-#define X86_FEATURE_PMM		(5*32+ 12) /* PadLock Montgomery Multiplier */
-#define X86_FEATURE_PMM_EN	(5*32+ 13) /* PMM enabled */
+#define X86_FEATURE_PHE		(5*32+10) /* PadLock Hash Engine */
+#define X86_FEATURE_PHE_EN	(5*32+11) /* PHE enabled */
+#define X86_FEATURE_PMM		(5*32+12) /* PadLock Montgomery Multiplier */
+#define X86_FEATURE_PMM_EN	(5*32+13) /* PMM enabled */
 
 /* More extended AMD flags: CPUID level 0x80000001, ecx, word 6 */
 #define X86_FEATURE_LAHF_LM	(6*32+ 0) /* LAHF/SAHF in long mode */
 #define X86_FEATURE_CMP_LEGACY	(6*32+ 1) /* If yes HyperThreading not valid */
-#define X86_FEATURE_IBS		(6*32+ 10) /* Instruction Based Sampling */
+#define X86_FEATURE_SVM		(6*32+ 2) /* Secure virtual machine */
+#define X86_FEATURE_EXTAPIC	(6*32+ 3) /* Extended APIC space */
+#define X86_FEATURE_CR8_LEGACY	(6*32+ 4) /* CR8 in 32-bit mode */
+#define X86_FEATURE_ABM		(6*32+ 5) /* Advanced bit manipulation */
+#define X86_FEATURE_SSE4A	(6*32+ 6) /* SSE-4A */
+#define X86_FEATURE_MISALIGNSSE (6*32+ 7) /* Misaligned SSE mode */
+#define X86_FEATURE_3DNOWPREFETCH (6*32+ 8) /* 3DNow prefetch instructions */
+#define X86_FEATURE_OSVW	(6*32+ 9) /* OS Visible Workaround */
+#define X86_FEATURE_IBS		(6*32+10) /* Instruction Based Sampling */
+#define X86_FEATURE_SSE5	(6*32+11) /* SSE-5 */
+#define X86_FEATURE_SKINIT	(6*32+12) /* SKINIT/STGI instructions */
+#define X86_FEATURE_WDT		(6*32+13) /* Watchdog timer */
 
 /*
  * Auxiliary flags: Linux defined - For features scattered in various
@@ -148,7 +183,7 @@ extern const char * const x86_power_flags[32];
 } while (0)
 #define setup_force_cpu_cap(bit) do { \
 	set_cpu_cap(&boot_cpu_data, bit);	\
-	clear_bit(bit, (unsigned long *)cleared_cpu_caps); 	\
+	clear_bit(bit, (unsigned long *)cleared_cpu_caps);	\
 } while (0)
 
 #define cpu_has_fpu		boot_cpu_has(X86_FEATURE_FPU)
@@ -189,6 +224,10 @@ extern const char * const x86_power_flags[32];
 #define cpu_has_gbpages		boot_cpu_has(X86_FEATURE_GBPAGES)
 #define cpu_has_arch_perfmon	boot_cpu_has(X86_FEATURE_ARCH_PERFMON)
 #define cpu_has_pat		boot_cpu_has(X86_FEATURE_PAT)
+#define cpu_has_xmm4_1		boot_cpu_has(X86_FEATURE_XMM4_1)
+#define cpu_has_xmm4_2		boot_cpu_has(X86_FEATURE_XMM4_2)
+#define cpu_has_x2apic		boot_cpu_has(X86_FEATURE_X2APIC)
+#define cpu_has_xsave		boot_cpu_has(X86_FEATURE_XSAVE)
 
 #if defined(CONFIG_X86_INVLPG) || defined(CONFIG_X86_64)
 # define cpu_has_invlpg		1
@@ -220,4 +259,4 @@ extern const char * const x86_power_flags[32];
 
 #endif /* defined(__KERNEL__) && !defined(__ASSEMBLY__) */
 
-#endif /* _ASM_X86_CPUFEATURE_H */
+#endif /* ASM_X86__CPUFEATURE_H */
diff --git a/include/asm-x86/current.h b/include/asm-x86/current.h
index 7515c19d4988..a863ead856f3 100644
--- a/include/asm-x86/current.h
+++ b/include/asm-x86/current.h
@@ -1,5 +1,5 @@
-#ifndef _X86_CURRENT_H
-#define _X86_CURRENT_H
+#ifndef ASM_X86__CURRENT_H
+#define ASM_X86__CURRENT_H
 
 #ifdef CONFIG_X86_32
 #include <linux/compiler.h>
@@ -36,4 +36,4 @@ static __always_inline struct task_struct *get_current(void)
 
 #define current get_current()
 
-#endif /* X86_CURRENT_H */
+#endif /* ASM_X86__CURRENT_H */
diff --git a/include/asm-x86/debugreg.h b/include/asm-x86/debugreg.h
index c6344d572b03..ecb6907c3ea4 100644
--- a/include/asm-x86/debugreg.h
+++ b/include/asm-x86/debugreg.h
@@ -1,5 +1,5 @@
-#ifndef _ASM_X86_DEBUGREG_H
-#define _ASM_X86_DEBUGREG_H
+#ifndef ASM_X86__DEBUGREG_H
+#define ASM_X86__DEBUGREG_H
 
 
 /* Indicate the register numbers for a number of the specific
@@ -67,4 +67,4 @@
 #define DR_LOCAL_SLOWDOWN (0x100)   /* Local slow the pipeline */
 #define DR_GLOBAL_SLOWDOWN (0x200)  /* Global slow the pipeline */
 
-#endif
+#endif /* ASM_X86__DEBUGREG_H */
diff --git a/include/asm-x86/delay.h b/include/asm-x86/delay.h
index 409a649204aa..8a0da95b4fc5 100644
--- a/include/asm-x86/delay.h
+++ b/include/asm-x86/delay.h
@@ -1,5 +1,5 @@
-#ifndef _ASM_X86_DELAY_H
-#define _ASM_X86_DELAY_H
+#ifndef ASM_X86__DELAY_H
+#define ASM_X86__DELAY_H
 
 /*
  * Copyright (C) 1993 Linus Torvalds
@@ -28,4 +28,4 @@ extern void __delay(unsigned long loops);
 
 void use_tsc_delay(void);
 
-#endif /* _ASM_X86_DELAY_H */
+#endif /* ASM_X86__DELAY_H */
diff --git a/include/asm-x86/desc.h b/include/asm-x86/desc.h
index a44c4dc70590..b73fea54def2 100644
--- a/include/asm-x86/desc.h
+++ b/include/asm-x86/desc.h
@@ -1,5 +1,5 @@
-#ifndef _ASM_DESC_H_
-#define _ASM_DESC_H_
+#ifndef ASM_X86__DESC_H
+#define ASM_X86__DESC_H
 
 #ifndef __ASSEMBLY__
 #include <asm/desc_defs.h>
@@ -397,4 +397,4 @@ static inline void set_system_gate_ist(int n, void *addr, unsigned ist)
 
 #endif /* __ASSEMBLY__ */
 
-#endif
+#endif /* ASM_X86__DESC_H */
diff --git a/include/asm-x86/desc_defs.h b/include/asm-x86/desc_defs.h
index f7bacf357dac..b881db664b46 100644
--- a/include/asm-x86/desc_defs.h
+++ b/include/asm-x86/desc_defs.h
@@ -1,6 +1,6 @@
 /* Written 2000 by Andi Kleen */
-#ifndef __ARCH_DESC_DEFS_H
-#define __ARCH_DESC_DEFS_H
+#ifndef ASM_X86__DESC_DEFS_H
+#define ASM_X86__DESC_DEFS_H
 
 /*
  * Segment descriptor structure definitions, usable from both x86_64 and i386
@@ -92,4 +92,4 @@ struct desc_ptr {
 
 #endif /* !__ASSEMBLY__ */
 
-#endif
+#endif /* ASM_X86__DESC_DEFS_H */
diff --git a/include/asm-x86/device.h b/include/asm-x86/device.h
index 87a715367a1b..1bece04c7d9d 100644
--- a/include/asm-x86/device.h
+++ b/include/asm-x86/device.h
@@ -1,13 +1,16 @@
-#ifndef _ASM_X86_DEVICE_H
-#define _ASM_X86_DEVICE_H
+#ifndef ASM_X86__DEVICE_H
+#define ASM_X86__DEVICE_H
 
 struct dev_archdata {
 #ifdef CONFIG_ACPI
 	void	*acpi_handle;
 #endif
+#ifdef CONFIG_X86_64
+struct dma_mapping_ops *dma_ops;
+#endif
 #ifdef CONFIG_DMAR
 	void *iommu; /* hook for IOMMU specific extension */
 #endif
 };
 
-#endif /* _ASM_X86_DEVICE_H */
+#endif /* ASM_X86__DEVICE_H */
diff --git a/include/asm-x86/div64.h b/include/asm-x86/div64.h
index 9a2d644c08ef..f9530f23f1d6 100644
--- a/include/asm-x86/div64.h
+++ b/include/asm-x86/div64.h
@@ -1,5 +1,5 @@
-#ifndef _ASM_X86_DIV64_H
-#define _ASM_X86_DIV64_H
+#ifndef ASM_X86__DIV64_H
+#define ASM_X86__DIV64_H
 
 #ifdef CONFIG_X86_32
 
@@ -57,4 +57,4 @@ static inline u64 div_u64_rem(u64 dividend, u32 divisor, u32 *remainder)
 # include <asm-generic/div64.h>
 #endif /* CONFIG_X86_32 */
 
-#endif /* _ASM_X86_DIV64_H */
+#endif /* ASM_X86__DIV64_H */
diff --git a/include/asm-x86/dma-mapping.h b/include/asm-x86/dma-mapping.h
index c2ddd3d1b883..5d200e78bd81 100644
--- a/include/asm-x86/dma-mapping.h
+++ b/include/asm-x86/dma-mapping.h
@@ -1,5 +1,5 @@
-#ifndef _ASM_DMA_MAPPING_H_
-#define _ASM_DMA_MAPPING_H_
+#ifndef ASM_X86__DMA_MAPPING_H
+#define ASM_X86__DMA_MAPPING_H
 
 /*
  * IOMMU interface. See Documentation/DMA-mapping.txt and DMA-API.txt for
@@ -17,7 +17,8 @@ extern int panic_on_overflow;
 extern int force_iommu;
 
 struct dma_mapping_ops {
-	int             (*mapping_error)(dma_addr_t dma_addr);
+	int             (*mapping_error)(struct device *dev,
+					 dma_addr_t dma_addr);
 	void*           (*alloc_coherent)(struct device *dev, size_t size,
 				dma_addr_t *dma_handle, gfp_t gfp);
 	void            (*free_coherent)(struct device *dev, size_t size,
@@ -56,14 +57,32 @@ struct dma_mapping_ops {
 	int		is_phys;
 };
 
-extern const struct dma_mapping_ops *dma_ops;
+extern struct dma_mapping_ops *dma_ops;
 
-static inline int dma_mapping_error(dma_addr_t dma_addr)
+static inline struct dma_mapping_ops *get_dma_ops(struct device *dev)
 {
-	if (dma_ops->mapping_error)
-		return dma_ops->mapping_error(dma_addr);
+#ifdef CONFIG_X86_32
+	return dma_ops;
+#else
+	if (unlikely(!dev) || !dev->archdata.dma_ops)
+		return dma_ops;
+	else
+		return dev->archdata.dma_ops;
+#endif
+}
+
+/* Make sure we keep the same behaviour */
+static inline int dma_mapping_error(struct device *dev, dma_addr_t dma_addr)
+{
+#ifdef CONFIG_X86_32
+	return 0;
+#else
+	struct dma_mapping_ops *ops = get_dma_ops(dev);
+	if (ops->mapping_error)
+		return ops->mapping_error(dev, dma_addr);
 
 	return (dma_addr == bad_dma_address);
+#endif
 }
 
 #define dma_alloc_noncoherent(d, s, h, f) dma_alloc_coherent(d, s, h, f)
@@ -83,44 +102,53 @@ static inline dma_addr_t
 dma_map_single(struct device *hwdev, void *ptr, size_t size,
 	       int direction)
 {
+	struct dma_mapping_ops *ops = get_dma_ops(hwdev);
+
 	BUG_ON(!valid_dma_direction(direction));
-	return dma_ops->map_single(hwdev, virt_to_phys(ptr), size, direction);
+	return ops->map_single(hwdev, virt_to_phys(ptr), size, direction);
 }
 
 static inline void
 dma_unmap_single(struct device *dev, dma_addr_t addr, size_t size,
 		 int direction)
 {
+	struct dma_mapping_ops *ops = get_dma_ops(dev);
+
 	BUG_ON(!valid_dma_direction(direction));
-	if (dma_ops->unmap_single)
-		dma_ops->unmap_single(dev, addr, size, direction);
+	if (ops->unmap_single)
+		ops->unmap_single(dev, addr, size, direction);
 }
 
 static inline int
 dma_map_sg(struct device *hwdev, struct scatterlist *sg,
 	   int nents, int direction)
 {
+	struct dma_mapping_ops *ops = get_dma_ops(hwdev);
+
 	BUG_ON(!valid_dma_direction(direction));
-	return dma_ops->map_sg(hwdev, sg, nents, direction);
+	return ops->map_sg(hwdev, sg, nents, direction);
 }
 
 static inline void
 dma_unmap_sg(struct device *hwdev, struct scatterlist *sg, int nents,
 	     int direction)
 {
+	struct dma_mapping_ops *ops = get_dma_ops(hwdev);
+
 	BUG_ON(!valid_dma_direction(direction));
-	if (dma_ops->unmap_sg)
-		dma_ops->unmap_sg(hwdev, sg, nents, direction);
+	if (ops->unmap_sg)
+		ops->unmap_sg(hwdev, sg, nents, direction);
 }
 
 static inline void
 dma_sync_single_for_cpu(struct device *hwdev, dma_addr_t dma_handle,
 			size_t size, int direction)
 {
+	struct dma_mapping_ops *ops = get_dma_ops(hwdev);
+
 	BUG_ON(!valid_dma_direction(direction));
-	if (dma_ops->sync_single_for_cpu)
-		dma_ops->sync_single_for_cpu(hwdev, dma_handle, size,
-					     direction);
+	if (ops->sync_single_for_cpu)
+		ops->sync_single_for_cpu(hwdev, dma_handle, size, direction);
 	flush_write_buffers();
 }
 
@@ -128,10 +156,11 @@ static inline void
 dma_sync_single_for_device(struct device *hwdev, dma_addr_t dma_handle,
 			   size_t size, int direction)
 {
+	struct dma_mapping_ops *ops = get_dma_ops(hwdev);
+
 	BUG_ON(!valid_dma_direction(direction));
-	if (dma_ops->sync_single_for_device)
-		dma_ops->sync_single_for_device(hwdev, dma_handle, size,
-						direction);
+	if (ops->sync_single_for_device)
+		ops->sync_single_for_device(hwdev, dma_handle, size, direction);
 	flush_write_buffers();
 }
 
@@ -139,11 +168,12 @@ static inline void
 dma_sync_single_range_for_cpu(struct device *hwdev, dma_addr_t dma_handle,
 			      unsigned long offset, size_t size, int direction)
 {
-	BUG_ON(!valid_dma_direction(direction));
-	if (dma_ops->sync_single_range_for_cpu)
-		dma_ops->sync_single_range_for_cpu(hwdev, dma_handle, offset,
-						   size, direction);
+	struct dma_mapping_ops *ops = get_dma_ops(hwdev);
 
+	BUG_ON(!valid_dma_direction(direction));
+	if (ops->sync_single_range_for_cpu)
+		ops->sync_single_range_for_cpu(hwdev, dma_handle, offset,
+					       size, direction);
 	flush_write_buffers();
 }
 
@@ -152,11 +182,12 @@ dma_sync_single_range_for_device(struct device *hwdev, dma_addr_t dma_handle,
 				 unsigned long offset, size_t size,
 				 int direction)
 {
-	BUG_ON(!valid_dma_direction(direction));
-	if (dma_ops->sync_single_range_for_device)
-		dma_ops->sync_single_range_for_device(hwdev, dma_handle,
-						      offset, size, direction);
+	struct dma_mapping_ops *ops = get_dma_ops(hwdev);
 
+	BUG_ON(!valid_dma_direction(direction));
+	if (ops->sync_single_range_for_device)
+		ops->sync_single_range_for_device(hwdev, dma_handle,
+						  offset, size, direction);
 	flush_write_buffers();
 }
 
@@ -164,9 +195,11 @@ static inline void
 dma_sync_sg_for_cpu(struct device *hwdev, struct scatterlist *sg,
 		    int nelems, int direction)
 {
+	struct dma_mapping_ops *ops = get_dma_ops(hwdev);
+
 	BUG_ON(!valid_dma_direction(direction));
-	if (dma_ops->sync_sg_for_cpu)
-		dma_ops->sync_sg_for_cpu(hwdev, sg, nelems, direction);
+	if (ops->sync_sg_for_cpu)
+		ops->sync_sg_for_cpu(hwdev, sg, nelems, direction);
 	flush_write_buffers();
 }
 
@@ -174,9 +207,11 @@ static inline void
 dma_sync_sg_for_device(struct device *hwdev, struct scatterlist *sg,
 		       int nelems, int direction)
 {
+	struct dma_mapping_ops *ops = get_dma_ops(hwdev);
+
 	BUG_ON(!valid_dma_direction(direction));
-	if (dma_ops->sync_sg_for_device)
-		dma_ops->sync_sg_for_device(hwdev, sg, nelems, direction);
+	if (ops->sync_sg_for_device)
+		ops->sync_sg_for_device(hwdev, sg, nelems, direction);
 
 	flush_write_buffers();
 }
@@ -185,9 +220,11 @@ static inline dma_addr_t dma_map_page(struct device *dev, struct page *page,
 				      size_t offset, size_t size,
 				      int direction)
 {
+	struct dma_mapping_ops *ops = get_dma_ops(dev);
+
 	BUG_ON(!valid_dma_direction(direction));
-	return dma_ops->map_single(dev, page_to_phys(page)+offset,
-				   size, direction);
+	return ops->map_single(dev, page_to_phys(page) + offset,
+			       size, direction);
 }
 
 static inline void dma_unmap_page(struct device *dev, dma_addr_t addr,
@@ -212,25 +249,5 @@ static inline int dma_get_cache_alignment(void)
 
 #define dma_is_consistent(d, h)	(1)
 
-#ifdef CONFIG_X86_32
-#  define ARCH_HAS_DMA_DECLARE_COHERENT_MEMORY
-struct dma_coherent_mem {
-	void		*virt_base;
-	u32		device_base;
-	int		size;
-	int		flags;
-	unsigned long	*bitmap;
-};
-
-extern int
-dma_declare_coherent_memory(struct device *dev, dma_addr_t bus_addr,
-			    dma_addr_t device_addr, size_t size, int flags);
-
-extern void
-dma_release_declared_memory(struct device *dev);
-
-extern void *
-dma_mark_declared_memory_occupied(struct device *dev,
-				  dma_addr_t device_addr, size_t size);
-#endif /* CONFIG_X86_32 */
-#endif
+#include <asm-generic/dma-coherent.h>
+#endif /* ASM_X86__DMA_MAPPING_H */
diff --git a/include/asm-x86/dma.h b/include/asm-x86/dma.h
index ca1098a7e580..c9f7a4eec555 100644
--- a/include/asm-x86/dma.h
+++ b/include/asm-x86/dma.h
@@ -5,8 +5,8 @@
  * and John Boyd, Nov. 1992.
  */
 
-#ifndef _ASM_X86_DMA_H
-#define _ASM_X86_DMA_H
+#ifndef ASM_X86__DMA_H
+#define ASM_X86__DMA_H
 
 #include <linux/spinlock.h>	/* And spinlocks */
 #include <asm/io.h>		/* need byte IO */
@@ -315,4 +315,4 @@ extern int isa_dma_bridge_buggy;
 #define isa_dma_bridge_buggy	(0)
 #endif
 
-#endif /* _ASM_X86_DMA_H */
+#endif /* ASM_X86__DMA_H */
diff --git a/include/asm-x86/dmi.h b/include/asm-x86/dmi.h
index 58a86571fe0f..1cff6fe81fa5 100644
--- a/include/asm-x86/dmi.h
+++ b/include/asm-x86/dmi.h
@@ -1,5 +1,5 @@
-#ifndef _ASM_X86_DMI_H
-#define _ASM_X86_DMI_H
+#ifndef ASM_X86__DMI_H
+#define ASM_X86__DMI_H
 
 #include <asm/io.h>
 
@@ -23,4 +23,4 @@ static inline void *dmi_alloc(unsigned len)
 #define dmi_ioremap early_ioremap
 #define dmi_iounmap early_iounmap
 
-#endif
+#endif /* ASM_X86__DMI_H */
diff --git a/include/asm-x86/ds.h b/include/asm-x86/ds.h
index 72c5a190bf48..c3c953a45b21 100644
--- a/include/asm-x86/ds.h
+++ b/include/asm-x86/ds.h
@@ -20,8 +20,8 @@
  * Markus Metzger <markus.t.metzger@intel.com>, 2007-2008
  */
 
-#ifndef _ASM_X86_DS_H
-#define _ASM_X86_DS_H
+#ifndef ASM_X86__DS_H
+#define ASM_X86__DS_H
 
 #ifdef CONFIG_X86_DS
 
@@ -235,4 +235,4 @@ extern void ds_free(struct ds_context *context);
 #define ds_init_intel(config) do {} while (0)
 
 #endif /* CONFIG_X86_DS */
-#endif /* _ASM_X86_DS_H */
+#endif /* ASM_X86__DS_H */
diff --git a/include/asm-x86/dwarf2.h b/include/asm-x86/dwarf2.h
index 738bb9fb3e53..21d1bc32ad7c 100644
--- a/include/asm-x86/dwarf2.h
+++ b/include/asm-x86/dwarf2.h
@@ -1,5 +1,5 @@
-#ifndef _DWARF2_H
-#define _DWARF2_H
+#ifndef ASM_X86__DWARF2_H
+#define ASM_X86__DWARF2_H
 
 #ifndef __ASSEMBLY__
 #warning "asm/dwarf2.h should be only included in pure assembly files"
@@ -58,4 +58,4 @@
 
 #endif
 
-#endif
+#endif /* ASM_X86__DWARF2_H */
diff --git a/include/asm-x86/e820.h b/include/asm-x86/e820.h
index 16a31e2c7c57..5abbdec06bd2 100644
--- a/include/asm-x86/e820.h
+++ b/include/asm-x86/e820.h
@@ -1,5 +1,5 @@
-#ifndef __ASM_E820_H
-#define __ASM_E820_H
+#ifndef ASM_X86__E820_H
+#define ASM_X86__E820_H
 #define E820MAP	0x2d0		/* our map */
 #define E820MAX	128		/* number of entries in E820MAP */
 
@@ -43,6 +43,7 @@
 #define E820_RESERVED	2
 #define E820_ACPI	3
 #define E820_NVS	4
+#define E820_UNUSABLE	5
 
 /* reserved RAM used by kernel itself */
 #define E820_RESERVED_KERN        128
@@ -64,6 +65,7 @@ struct e820map {
 extern struct e820map e820;
 extern struct e820map e820_saved;
 
+extern unsigned long pci_mem_start;
 extern int e820_any_mapped(u64 start, u64 end, unsigned type);
 extern int e820_all_mapped(u64 start, u64 end, unsigned type);
 extern void e820_add_region(u64 start, u64 size, int type);
@@ -120,6 +122,7 @@ extern void e820_register_active_regions(int nid, unsigned long start_pfn,
 extern u64 e820_hole_size(u64 start, u64 end);
 extern void finish_e820_parsing(void);
 extern void e820_reserve_resources(void);
+extern void e820_reserve_resources_late(void);
 extern void setup_memory_map(void);
 extern char *default_machine_specific_memory_setup(void);
 extern char *machine_specific_memory_setup(void);
@@ -140,4 +143,4 @@ extern char *memory_setup(void);
 #define HIGH_MEMORY	(1024*1024)
 #endif /* __KERNEL__ */
 
-#endif  /* __ASM_E820_H */
+#endif /* ASM_X86__E820_H */
diff --git a/include/asm-x86/edac.h b/include/asm-x86/edac.h
index a8088f63a30e..9493c5b27bbd 100644
--- a/include/asm-x86/edac.h
+++ b/include/asm-x86/edac.h
@@ -1,5 +1,5 @@
-#ifndef _ASM_X86_EDAC_H
-#define _ASM_X86_EDAC_H
+#ifndef ASM_X86__EDAC_H
+#define ASM_X86__EDAC_H
 
 /* ECC atomic, DMA, SMP and interrupt safe scrub function */
 
@@ -15,4 +15,4 @@ static inline void atomic_scrub(void *va, u32 size)
 		asm volatile("lock; addl $0, %0"::"m" (*virt_addr));
 }
 
-#endif
+#endif /* ASM_X86__EDAC_H */
diff --git a/include/asm-x86/efi.h b/include/asm-x86/efi.h
index 7ed2bd7a7f51..ed2de22e8705 100644
--- a/include/asm-x86/efi.h
+++ b/include/asm-x86/efi.h
@@ -1,5 +1,5 @@
-#ifndef _ASM_X86_EFI_H
-#define _ASM_X86_EFI_H
+#ifndef ASM_X86__EFI_H
+#define ASM_X86__EFI_H
 
 #ifdef CONFIG_X86_32
 
@@ -86,7 +86,7 @@ extern u64 efi_call6(void *fp, u64 arg1, u64 arg2, u64 arg3,
 	efi_call6((void *)(efi.systab->runtime->f), (u64)(a1), (u64)(a2), \
 		  (u64)(a3), (u64)(a4), (u64)(a5), (u64)(a6))
 
-extern void *efi_ioremap(unsigned long addr, unsigned long size);
+extern void __iomem *efi_ioremap(unsigned long addr, unsigned long size);
 
 #endif /* CONFIG_X86_32 */
 
@@ -94,4 +94,4 @@ extern void efi_reserve_early(void);
 extern void efi_call_phys_prelog(void);
 extern void efi_call_phys_epilog(void);
 
-#endif
+#endif /* ASM_X86__EFI_H */
diff --git a/include/asm-x86/elf.h b/include/asm-x86/elf.h
index 7be4733c793e..cd678b2d6a74 100644
--- a/include/asm-x86/elf.h
+++ b/include/asm-x86/elf.h
@@ -1,5 +1,5 @@
-#ifndef _ASM_X86_ELF_H
-#define _ASM_X86_ELF_H
+#ifndef ASM_X86__ELF_H
+#define ASM_X86__ELF_H
 
 /*
  * ELF register definitions..
@@ -332,4 +332,4 @@ extern int syscall32_setup_pages(struct linux_binprm *, int exstack);
 extern unsigned long arch_randomize_brk(struct mm_struct *mm);
 #define arch_randomize_brk arch_randomize_brk
 
-#endif
+#endif /* ASM_X86__ELF_H */
diff --git a/include/asm-x86/emergency-restart.h b/include/asm-x86/emergency-restart.h
index 8e6aef19f8f0..190d0d8b71e3 100644
--- a/include/asm-x86/emergency-restart.h
+++ b/include/asm-x86/emergency-restart.h
@@ -1,5 +1,5 @@
-#ifndef _ASM_EMERGENCY_RESTART_H
-#define _ASM_EMERGENCY_RESTART_H
+#ifndef ASM_X86__EMERGENCY_RESTART_H
+#define ASM_X86__EMERGENCY_RESTART_H
 
 enum reboot_type {
 	BOOT_TRIPLE = 't',
@@ -15,4 +15,4 @@ extern enum reboot_type reboot_type;
 
 extern void machine_emergency_restart(void);
 
-#endif /* _ASM_EMERGENCY_RESTART_H */
+#endif /* ASM_X86__EMERGENCY_RESTART_H */
diff --git a/include/asm-x86/es7000/apic.h b/include/asm-x86/es7000/apic.h
new file mode 100644
index 000000000000..bd2c44d1f7ac
--- /dev/null
+++ b/include/asm-x86/es7000/apic.h
@@ -0,0 +1,194 @@
+#ifndef __ASM_ES7000_APIC_H
+#define __ASM_ES7000_APIC_H
+
+#define xapic_phys_to_log_apicid(cpu) per_cpu(x86_bios_cpu_apicid, cpu)
+#define esr_disable (1)
+
+static inline int apic_id_registered(void)
+{
+	        return (1);
+}
+
+static inline cpumask_t target_cpus(void)
+{
+#if defined CONFIG_ES7000_CLUSTERED_APIC
+	return CPU_MASK_ALL;
+#else
+	return cpumask_of_cpu(smp_processor_id());
+#endif
+}
+#define TARGET_CPUS	(target_cpus())
+
+#if defined CONFIG_ES7000_CLUSTERED_APIC
+#define APIC_DFR_VALUE		(APIC_DFR_CLUSTER)
+#define INT_DELIVERY_MODE	(dest_LowestPrio)
+#define INT_DEST_MODE		(1)    /* logical delivery broadcast to all procs */
+#define NO_BALANCE_IRQ		(1)
+#undef  WAKE_SECONDARY_VIA_INIT
+#define WAKE_SECONDARY_VIA_MIP
+#else
+#define APIC_DFR_VALUE		(APIC_DFR_FLAT)
+#define INT_DELIVERY_MODE	(dest_Fixed)
+#define INT_DEST_MODE		(0)    /* phys delivery to target procs */
+#define NO_BALANCE_IRQ		(0)
+#undef  APIC_DEST_LOGICAL
+#define APIC_DEST_LOGICAL	0x0
+#define WAKE_SECONDARY_VIA_INIT
+#endif
+
+static inline unsigned long check_apicid_used(physid_mask_t bitmap, int apicid)
+{
+	return 0;
+}
+static inline unsigned long check_apicid_present(int bit)
+{
+	return physid_isset(bit, phys_cpu_present_map);
+}
+
+#define apicid_cluster(apicid) (apicid & 0xF0)
+
+static inline unsigned long calculate_ldr(int cpu)
+{
+	unsigned long id;
+	id = xapic_phys_to_log_apicid(cpu);
+	return (SET_APIC_LOGICAL_ID(id));
+}
+
+/*
+ * Set up the logical destination ID.
+ *
+ * Intel recommends to set DFR, LdR and TPR before enabling
+ * an APIC.  See e.g. "AP-388 82489DX User's Manual" (Intel
+ * document number 292116).  So here it goes...
+ */
+static inline void init_apic_ldr(void)
+{
+	unsigned long val;
+	int cpu = smp_processor_id();
+
+	apic_write(APIC_DFR, APIC_DFR_VALUE);
+	val = calculate_ldr(cpu);
+	apic_write(APIC_LDR, val);
+}
+
+#ifndef CONFIG_X86_GENERICARCH
+extern void enable_apic_mode(void);
+#endif
+
+extern int apic_version [MAX_APICS];
+static inline void setup_apic_routing(void)
+{
+	int apic = per_cpu(x86_bios_cpu_apicid, smp_processor_id());
+	printk("Enabling APIC mode:  %s.  Using %d I/O APICs, target cpus %lx\n",
+		(apic_version[apic] == 0x14) ?
+		"Physical Cluster" : "Logical Cluster", nr_ioapics, cpus_addr(TARGET_CPUS)[0]);
+}
+
+static inline int multi_timer_check(int apic, int irq)
+{
+	return 0;
+}
+
+static inline int apicid_to_node(int logical_apicid)
+{
+	return 0;
+}
+
+
+static inline int cpu_present_to_apicid(int mps_cpu)
+{
+	if (!mps_cpu)
+		return boot_cpu_physical_apicid;
+	else if (mps_cpu < NR_CPUS)
+		return (int) per_cpu(x86_bios_cpu_apicid, mps_cpu);
+	else
+		return BAD_APICID;
+}
+
+static inline physid_mask_t apicid_to_cpu_present(int phys_apicid)
+{
+	static int id = 0;
+	physid_mask_t mask;
+	mask = physid_mask_of_physid(id);
+	++id;
+	return mask;
+}
+
+extern u8 cpu_2_logical_apicid[];
+/* Mapping from cpu number to logical apicid */
+static inline int cpu_to_logical_apicid(int cpu)
+{
+#ifdef CONFIG_SMP
+       if (cpu >= NR_CPUS)
+	       return BAD_APICID;
+       return (int)cpu_2_logical_apicid[cpu];
+#else
+	return logical_smp_processor_id();
+#endif
+}
+
+static inline physid_mask_t ioapic_phys_id_map(physid_mask_t phys_map)
+{
+	/* For clustered we don't have a good way to do this yet - hack */
+	return physids_promote(0xff);
+}
+
+
+static inline void setup_portio_remap(void)
+{
+}
+
+extern unsigned int boot_cpu_physical_apicid;
+static inline int check_phys_apicid_present(int cpu_physical_apicid)
+{
+	boot_cpu_physical_apicid = read_apic_id();
+	return (1);
+}
+
+static inline unsigned int cpu_mask_to_apicid(cpumask_t cpumask)
+{
+	int num_bits_set;
+	int cpus_found = 0;
+	int cpu;
+	int apicid;
+
+	num_bits_set = cpus_weight(cpumask);
+	/* Return id to all */
+	if (num_bits_set == NR_CPUS)
+#if defined CONFIG_ES7000_CLUSTERED_APIC
+		return 0xFF;
+#else
+		return cpu_to_logical_apicid(0);
+#endif
+	/*
+	 * The cpus in the mask must all be on the apic cluster.  If are not
+	 * on the same apicid cluster return default value of TARGET_CPUS.
+	 */
+	cpu = first_cpu(cpumask);
+	apicid = cpu_to_logical_apicid(cpu);
+	while (cpus_found < num_bits_set) {
+		if (cpu_isset(cpu, cpumask)) {
+			int new_apicid = cpu_to_logical_apicid(cpu);
+			if (apicid_cluster(apicid) !=
+					apicid_cluster(new_apicid)){
+				printk ("%s: Not a valid mask!\n",__FUNCTION__);
+#if defined CONFIG_ES7000_CLUSTERED_APIC
+				return 0xFF;
+#else
+				return cpu_to_logical_apicid(0);
+#endif
+			}
+			apicid = new_apicid;
+			cpus_found++;
+		}
+		cpu++;
+	}
+	return apicid;
+}
+
+static inline u32 phys_pkg_id(u32 cpuid_apic, int index_msb)
+{
+	return cpuid_apic >> index_msb;
+}
+
+#endif /* __ASM_ES7000_APIC_H */
diff --git a/include/asm-x86/es7000/apicdef.h b/include/asm-x86/es7000/apicdef.h
new file mode 100644
index 000000000000..8b234a3cb851
--- /dev/null
+++ b/include/asm-x86/es7000/apicdef.h
@@ -0,0 +1,13 @@
+#ifndef __ASM_ES7000_APICDEF_H
+#define __ASM_ES7000_APICDEF_H
+
+#define		APIC_ID_MASK		(0xFF<<24)
+
+static inline unsigned get_apic_id(unsigned long x)
+{
+	return (((x)>>24)&0xFF);
+}
+
+#define		GET_APIC_ID(x)	get_apic_id(x)
+
+#endif
diff --git a/include/asm-x86/es7000/ipi.h b/include/asm-x86/es7000/ipi.h
new file mode 100644
index 000000000000..632a955fcc0a
--- /dev/null
+++ b/include/asm-x86/es7000/ipi.h
@@ -0,0 +1,24 @@
+#ifndef __ASM_ES7000_IPI_H
+#define __ASM_ES7000_IPI_H
+
+void send_IPI_mask_sequence(cpumask_t mask, int vector);
+
+static inline void send_IPI_mask(cpumask_t mask, int vector)
+{
+	send_IPI_mask_sequence(mask, vector);
+}
+
+static inline void send_IPI_allbutself(int vector)
+{
+	cpumask_t mask = cpu_online_map;
+	cpu_clear(smp_processor_id(), mask);
+	if (!cpus_empty(mask))
+		send_IPI_mask(mask, vector);
+}
+
+static inline void send_IPI_all(int vector)
+{
+	send_IPI_mask(cpu_online_map, vector);
+}
+
+#endif /* __ASM_ES7000_IPI_H */
diff --git a/include/asm-x86/es7000/mpparse.h b/include/asm-x86/es7000/mpparse.h
new file mode 100644
index 000000000000..7b5c889d8e7d
--- /dev/null
+++ b/include/asm-x86/es7000/mpparse.h
@@ -0,0 +1,29 @@
+#ifndef __ASM_ES7000_MPPARSE_H
+#define __ASM_ES7000_MPPARSE_H
+
+#include <linux/acpi.h>
+
+extern int parse_unisys_oem (char *oemptr);
+extern int find_unisys_acpi_oem_table(unsigned long *oem_addr);
+extern void setup_unisys(void);
+
+#ifndef CONFIG_X86_GENERICARCH
+extern int acpi_madt_oem_check(char *oem_id, char *oem_table_id);
+extern int mps_oem_check(struct mp_config_table *mpc, char *oem,
+				char *productid);
+#endif
+
+#ifdef CONFIG_ACPI
+
+static inline int es7000_check_dsdt(void)
+{
+	struct acpi_table_header header;
+
+	if (ACPI_SUCCESS(acpi_get_table_header(ACPI_SIG_DSDT, 0, &header)) &&
+	    !strncmp(header.oem_id, "UNISYS", 6))
+		return 1;
+	return 0;
+}
+#endif
+
+#endif /* __ASM_MACH_MPPARSE_H */
diff --git a/include/asm-x86/es7000/wakecpu.h b/include/asm-x86/es7000/wakecpu.h
new file mode 100644
index 000000000000..3ffc5a7bf667
--- /dev/null
+++ b/include/asm-x86/es7000/wakecpu.h
@@ -0,0 +1,59 @@
+#ifndef __ASM_ES7000_WAKECPU_H
+#define __ASM_ES7000_WAKECPU_H
+
+/*
+ * This file copes with machines that wakeup secondary CPUs by the
+ * INIT, INIT, STARTUP sequence.
+ */
+
+#ifdef CONFIG_ES7000_CLUSTERED_APIC
+#define WAKE_SECONDARY_VIA_MIP
+#else
+#define WAKE_SECONDARY_VIA_INIT
+#endif
+
+#ifdef WAKE_SECONDARY_VIA_MIP
+extern int es7000_start_cpu(int cpu, unsigned long eip);
+static inline int
+wakeup_secondary_cpu(int phys_apicid, unsigned long start_eip)
+{
+	int boot_error = 0;
+	boot_error = es7000_start_cpu(phys_apicid, start_eip);
+	return boot_error;
+}
+#endif
+
+#define TRAMPOLINE_LOW phys_to_virt(0x467)
+#define TRAMPOLINE_HIGH phys_to_virt(0x469)
+
+#define boot_cpu_apicid boot_cpu_physical_apicid
+
+static inline void wait_for_init_deassert(atomic_t *deassert)
+{
+#ifdef WAKE_SECONDARY_VIA_INIT
+	while (!atomic_read(deassert))
+		cpu_relax();
+#endif
+	return;
+}
+
+/* Nothing to do for most platforms, since cleared by the INIT cycle */
+static inline void smp_callin_clear_local_apic(void)
+{
+}
+
+static inline void store_NMI_vector(unsigned short *high, unsigned short *low)
+{
+}
+
+static inline void restore_NMI_vector(unsigned short *high, unsigned short *low)
+{
+}
+
+#if APIC_DEBUG
+ #define inquire_remote_apic(apicid) __inquire_remote_apic(apicid)
+#else
+ #define inquire_remote_apic(apicid) {}
+#endif
+
+#endif /* __ASM_MACH_WAKECPU_H */
diff --git a/include/asm-x86/fb.h b/include/asm-x86/fb.h
index 53018464aea6..aca38dbd9a64 100644
--- a/include/asm-x86/fb.h
+++ b/include/asm-x86/fb.h
@@ -1,5 +1,5 @@
-#ifndef _ASM_X86_FB_H
-#define _ASM_X86_FB_H
+#ifndef ASM_X86__FB_H
+#define ASM_X86__FB_H
 
 #include <linux/fb.h>
 #include <linux/fs.h>
@@ -18,4 +18,4 @@ extern int fb_is_primary_device(struct fb_info *info);
 static inline int fb_is_primary_device(struct fb_info *info) { return 0; }
 #endif
 
-#endif /* _ASM_X86_FB_H */
+#endif /* ASM_X86__FB_H */
diff --git a/include/asm-x86/fixmap.h b/include/asm-x86/fixmap.h
index 44d4f8217349..78e33a1bc591 100644
--- a/include/asm-x86/fixmap.h
+++ b/include/asm-x86/fixmap.h
@@ -1,5 +1,5 @@
-#ifndef _ASM_FIXMAP_H
-#define _ASM_FIXMAP_H
+#ifndef ASM_X86__FIXMAP_H
+#define ASM_X86__FIXMAP_H
 
 #ifdef CONFIG_X86_32
 # include "fixmap_32.h"
@@ -65,4 +65,4 @@ static inline unsigned long virt_to_fix(const unsigned long vaddr)
 	BUG_ON(vaddr >= FIXADDR_TOP || vaddr < FIXADDR_START);
 	return __virt_to_fix(vaddr);
 }
-#endif
+#endif /* ASM_X86__FIXMAP_H */
diff --git a/include/asm-x86/fixmap_32.h b/include/asm-x86/fixmap_32.h
index f1ac2b2167d7..784e3e759866 100644
--- a/include/asm-x86/fixmap_32.h
+++ b/include/asm-x86/fixmap_32.h
@@ -10,8 +10,8 @@
  * Support of BIGMEM added by Gerhard Wichert, Siemens AG, July 1999
  */
 
-#ifndef _ASM_FIXMAP_32_H
-#define _ASM_FIXMAP_32_H
+#ifndef ASM_X86__FIXMAP_32_H
+#define ASM_X86__FIXMAP_32_H
 
 
 /* used by vmalloc.c, vsyscall.lds.S.
@@ -120,4 +120,4 @@ extern void reserve_top_address(unsigned long reserve);
 #define FIXADDR_BOOT_START	(FIXADDR_TOP - __FIXADDR_BOOT_SIZE)
 
 #endif /* !__ASSEMBLY__ */
-#endif
+#endif /* ASM_X86__FIXMAP_32_H */
diff --git a/include/asm-x86/fixmap_64.h b/include/asm-x86/fixmap_64.h
index 00f3d74a0524..dafb24bc0424 100644
--- a/include/asm-x86/fixmap_64.h
+++ b/include/asm-x86/fixmap_64.h
@@ -8,8 +8,8 @@
  * Copyright (C) 1998 Ingo Molnar
  */
 
-#ifndef _ASM_FIXMAP_64_H
-#define _ASM_FIXMAP_64_H
+#ifndef ASM_X86__FIXMAP_64_H
+#define ASM_X86__FIXMAP_64_H
 
 #include <linux/kernel.h>
 #include <asm/acpi.h>
@@ -80,4 +80,4 @@ enum fixed_addresses {
 #define FIXADDR_USER_START	((unsigned long)VSYSCALL32_VSYSCALL)
 #define FIXADDR_USER_END	(FIXADDR_USER_START + PAGE_SIZE)
 
-#endif
+#endif /* ASM_X86__FIXMAP_64_H */
diff --git a/include/asm-x86/floppy.h b/include/asm-x86/floppy.h
index dbe82a5c5eac..7d83a3a83e37 100644
--- a/include/asm-x86/floppy.h
+++ b/include/asm-x86/floppy.h
@@ -7,8 +7,8 @@
  *
  * Copyright (C) 1995
  */
-#ifndef _ASM_X86_FLOPPY_H
-#define _ASM_X86_FLOPPY_H
+#ifndef ASM_X86__FLOPPY_H
+#define ASM_X86__FLOPPY_H
 
 #include <linux/vmalloc.h>
 
@@ -278,4 +278,4 @@ static int FDC2 = -1;
 
 #define EXTRA_FLOPPY_PARAMS
 
-#endif /* _ASM_X86_FLOPPY_H */
+#endif /* ASM_X86__FLOPPY_H */
diff --git a/include/asm-x86/ftrace.h b/include/asm-x86/ftrace.h
index 5c68b32ee1c8..be0e004ad148 100644
--- a/include/asm-x86/ftrace.h
+++ b/include/asm-x86/ftrace.h
@@ -1,5 +1,5 @@
-#ifndef _ASM_X86_FTRACE
-#define _ASM_X86_FTRACE
+#ifndef ASM_X86__FTRACE_H
+#define ASM_X86__FTRACE_H
 
 #ifdef CONFIG_FTRACE
 #define MCOUNT_ADDR		((long)(mcount))
@@ -11,4 +11,4 @@ extern void mcount(void);
 
 #endif /* CONFIG_FTRACE */
 
-#endif /* _ASM_X86_FTRACE */
+#endif /* ASM_X86__FTRACE_H */
diff --git a/include/asm-x86/futex.h b/include/asm-x86/futex.h
index e7a76b37b333..45dc24d84186 100644
--- a/include/asm-x86/futex.h
+++ b/include/asm-x86/futex.h
@@ -1,5 +1,5 @@
-#ifndef _ASM_X86_FUTEX_H
-#define _ASM_X86_FUTEX_H
+#ifndef ASM_X86__FUTEX_H
+#define ASM_X86__FUTEX_H
 
 #ifdef __KERNEL__
 
@@ -137,4 +137,4 @@ static inline int futex_atomic_cmpxchg_inatomic(int __user *uaddr, int oldval,
 }
 
 #endif
-#endif
+#endif /* ASM_X86__FUTEX_H */
diff --git a/include/asm-x86/gart.h b/include/asm-x86/gart.h
index 3f62a83887f3..07f445844146 100644
--- a/include/asm-x86/gart.h
+++ b/include/asm-x86/gart.h
@@ -1,5 +1,5 @@
-#ifndef _ASM_X8664_GART_H
-#define _ASM_X8664_GART_H 1
+#ifndef ASM_X86__GART_H
+#define ASM_X86__GART_H
 
 #include <asm/e820.h>
 
@@ -68,4 +68,4 @@ static inline int aperture_valid(u64 aper_base, u32 aper_size, u32 min_size)
 	return 1;
 }
 
-#endif
+#endif /* ASM_X86__GART_H */
diff --git a/include/asm-x86/genapic_32.h b/include/asm-x86/genapic_32.h
index b02ea6e17de8..34280f027664 100644
--- a/include/asm-x86/genapic_32.h
+++ b/include/asm-x86/genapic_32.h
@@ -1,5 +1,5 @@
-#ifndef _ASM_GENAPIC_H
-#define _ASM_GENAPIC_H 1
+#ifndef ASM_X86__GENAPIC_32_H
+#define ASM_X86__GENAPIC_32_H
 
 #include <asm/mpspec.h>
 
@@ -118,6 +118,7 @@ enum uv_system_type {UV_NONE, UV_LEGACY_APIC, UV_X2APIC, UV_NON_UNIQUE_APIC};
 #define get_uv_system_type()		UV_NONE
 #define is_uv_system()			0
 #define uv_wakeup_secondary(a, b)	1
+#define uv_system_init()		do {} while (0)
 
 
-#endif
+#endif /* ASM_X86__GENAPIC_32_H */
diff --git a/include/asm-x86/genapic_64.h b/include/asm-x86/genapic_64.h
index 0f8504627c41..ed6a4886c082 100644
--- a/include/asm-x86/genapic_64.h
+++ b/include/asm-x86/genapic_64.h
@@ -1,5 +1,5 @@
-#ifndef _ASM_GENAPIC_H
-#define _ASM_GENAPIC_H 1
+#ifndef ASM_X86__GENAPIC_64_H
+#define ASM_X86__GENAPIC_64_H
 
 /*
  * Copyright 2004 James Cleverdon, IBM.
@@ -14,6 +14,7 @@
 
 struct genapic {
 	char *name;
+	int (*acpi_madt_oem_check)(char *oem_id, char *oem_table_id);
 	u32 int_delivery_mode;
 	u32 int_dest_mode;
 	int (*apic_id_registered)(void);
@@ -24,17 +25,24 @@ struct genapic {
 	void (*send_IPI_mask)(cpumask_t mask, int vector);
 	void (*send_IPI_allbutself)(int vector);
 	void (*send_IPI_all)(int vector);
+	void (*send_IPI_self)(int vector);
 	/* */
 	unsigned int (*cpu_mask_to_apicid)(cpumask_t cpumask);
 	unsigned int (*phys_pkg_id)(int index_msb);
+	unsigned int (*get_apic_id)(unsigned long x);
+	unsigned long (*set_apic_id)(unsigned int id);
+	unsigned long apic_id_mask;
 };
 
 extern struct genapic *genapic;
 
 extern struct genapic apic_flat;
 extern struct genapic apic_physflat;
+extern struct genapic apic_x2apic_cluster;
+extern struct genapic apic_x2apic_phys;
 extern int acpi_madt_oem_check(char *, char *);
 
+extern void apic_send_IPI_self(int vector);
 enum uv_system_type {UV_NONE, UV_LEGACY_APIC, UV_X2APIC, UV_NON_UNIQUE_APIC};
 extern enum uv_system_type get_uv_system_type(void);
 extern int is_uv_system(void);
@@ -42,8 +50,9 @@ extern int is_uv_system(void);
 extern struct genapic apic_x2apic_uv_x;
 DECLARE_PER_CPU(int, x2apic_extra_bits);
 extern void uv_cpu_init(void);
+extern void uv_system_init(void);
 extern int uv_wakeup_secondary(int phys_apicid, unsigned int start_rip);
 
 extern void setup_apic_routing(void);
 
-#endif
+#endif /* ASM_X86__GENAPIC_64_H */
diff --git a/include/asm-x86/geode.h b/include/asm-x86/geode.h
index bb06027fc83e..3f3444be2638 100644
--- a/include/asm-x86/geode.h
+++ b/include/asm-x86/geode.h
@@ -7,8 +7,8 @@
  * as published by the Free Software Foundation.
  */
 
-#ifndef _ASM_GEODE_H_
-#define _ASM_GEODE_H_
+#ifndef ASM_X86__GEODE_H
+#define ASM_X86__GEODE_H
 
 #include <asm/processor.h>
 #include <linux/io.h>
@@ -50,6 +50,7 @@ extern int geode_get_dev_base(unsigned int dev);
 #define MSR_PIC_YSEL_HIGH	0x51400021
 #define MSR_PIC_ZSEL_LOW	0x51400022
 #define MSR_PIC_ZSEL_HIGH	0x51400023
+#define MSR_PIC_IRQM_LPC	0x51400025
 
 #define MSR_MFGPT_IRQ		0x51400028
 #define MSR_MFGPT_NR		0x51400029
@@ -237,7 +238,7 @@ static inline u16 geode_mfgpt_read(int timer, u16 reg)
 }
 
 extern int geode_mfgpt_toggle_event(int timer, int cmp, int event, int enable);
-extern int geode_mfgpt_set_irq(int timer, int cmp, int irq, int enable);
+extern int geode_mfgpt_set_irq(int timer, int cmp, int *irq, int enable);
 extern int geode_mfgpt_alloc_timer(int timer, int domain);
 
 #define geode_mfgpt_setup_irq(t, c, i) geode_mfgpt_set_irq((t), (c), (i), 1)
@@ -249,4 +250,4 @@ extern int __init mfgpt_timer_setup(void);
 static inline int mfgpt_timer_setup(void) { return 0; }
 #endif
 
-#endif
+#endif /* ASM_X86__GEODE_H */
diff --git a/include/asm-x86/gpio.h b/include/asm-x86/gpio.h
index ff87fca0caf9..497fb980d962 100644
--- a/include/asm-x86/gpio.h
+++ b/include/asm-x86/gpio.h
@@ -1,6 +1,56 @@
+/*
+ * Generic GPIO API implementation for x86.
+ *
+ * Derived from the generic GPIO API for powerpc:
+ *
+ * Copyright (c) 2007-2008  MontaVista Software, Inc.
+ *
+ * Author: Anton Vorontsov <avorontsov@ru.mvista.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
 #ifndef _ASM_I386_GPIO_H
 #define _ASM_I386_GPIO_H
 
-#include <gpio.h>
+#include <asm-generic/gpio.h>
+
+#ifdef CONFIG_GPIOLIB
+
+/*
+ * Just call gpiolib.
+ */
+static inline int gpio_get_value(unsigned int gpio)
+{
+	return __gpio_get_value(gpio);
+}
+
+static inline void gpio_set_value(unsigned int gpio, int value)
+{
+	__gpio_set_value(gpio, value);
+}
+
+static inline int gpio_cansleep(unsigned int gpio)
+{
+	return __gpio_cansleep(gpio);
+}
+
+/*
+ * Not implemented, yet.
+ */
+static inline int gpio_to_irq(unsigned int gpio)
+{
+	return -ENOSYS;
+}
+
+static inline int irq_to_gpio(unsigned int irq)
+{
+	return -EINVAL;
+}
+
+#endif /* CONFIG_GPIOLIB */
 
-#endif /* _ASM_I386_GPIO_H */
+#endif /* ASM_X86__GPIO_H */
diff --git a/include/asm-x86/hardirq_32.h b/include/asm-x86/hardirq_32.h
index 4f85f0f4b563..700fe230d919 100644
--- a/include/asm-x86/hardirq_32.h
+++ b/include/asm-x86/hardirq_32.h
@@ -1,5 +1,5 @@
-#ifndef __ASM_HARDIRQ_H
-#define __ASM_HARDIRQ_H
+#ifndef ASM_X86__HARDIRQ_32_H
+#define ASM_X86__HARDIRQ_32_H
 
 #include <linux/threads.h>
 #include <linux/irq.h>
@@ -25,4 +25,4 @@ DECLARE_PER_CPU(irq_cpustat_t, irq_stat);
 void ack_bad_irq(unsigned int irq);
 #include <linux/irq_cpustat.h>
 
-#endif /* __ASM_HARDIRQ_H */
+#endif /* ASM_X86__HARDIRQ_32_H */
diff --git a/include/asm-x86/hardirq_64.h b/include/asm-x86/hardirq_64.h
index 95d5e090ed89..f8bd2919a8ce 100644
--- a/include/asm-x86/hardirq_64.h
+++ b/include/asm-x86/hardirq_64.h
@@ -1,5 +1,5 @@
-#ifndef __ASM_HARDIRQ_H
-#define __ASM_HARDIRQ_H
+#ifndef ASM_X86__HARDIRQ_64_H
+#define ASM_X86__HARDIRQ_64_H
 
 #include <linux/threads.h>
 #include <linux/irq.h>
@@ -20,4 +20,4 @@
 
 extern void ack_bad_irq(unsigned int irq);
 
-#endif /* __ASM_HARDIRQ_H */
+#endif /* ASM_X86__HARDIRQ_64_H */
diff --git a/include/asm-x86/highmem.h b/include/asm-x86/highmem.h
index 4514b16cc723..bc3f6a280316 100644
--- a/include/asm-x86/highmem.h
+++ b/include/asm-x86/highmem.h
@@ -15,8 +15,8 @@
  * Copyright (C) 1999 Ingo Molnar <mingo@redhat.com>
  */
 
-#ifndef _ASM_HIGHMEM_H
-#define _ASM_HIGHMEM_H
+#ifndef ASM_X86__HIGHMEM_H
+#define ASM_X86__HIGHMEM_H
 
 #ifdef __KERNEL__
 
@@ -79,4 +79,4 @@ extern void add_highpages_with_active_regions(int nid, unsigned long start_pfn,
 
 #endif /* __KERNEL__ */
 
-#endif /* _ASM_HIGHMEM_H */
+#endif /* ASM_X86__HIGHMEM_H */
diff --git a/include/asm-x86/hpet.h b/include/asm-x86/hpet.h
index 82f1ac641bd7..cbbbb6d4dd32 100644
--- a/include/asm-x86/hpet.h
+++ b/include/asm-x86/hpet.h
@@ -1,5 +1,5 @@
-#ifndef ASM_X86_HPET_H
-#define ASM_X86_HPET_H
+#ifndef ASM_X86__HPET_H
+#define ASM_X86__HPET_H
 
 #ifdef CONFIG_HPET_TIMER
 
@@ -90,4 +90,4 @@ static inline int is_hpet_enabled(void) { return 0; }
 #define hpet_readl(a) 0
 
 #endif
-#endif /* ASM_X86_HPET_H */
+#endif /* ASM_X86__HPET_H */
diff --git a/include/asm-x86/hugetlb.h b/include/asm-x86/hugetlb.h
index 439a9acc132d..0b7ec5dc0884 100644
--- a/include/asm-x86/hugetlb.h
+++ b/include/asm-x86/hugetlb.h
@@ -1,5 +1,5 @@
-#ifndef _ASM_X86_HUGETLB_H
-#define _ASM_X86_HUGETLB_H
+#ifndef ASM_X86__HUGETLB_H
+#define ASM_X86__HUGETLB_H
 
 #include <asm/page.h>
 
@@ -90,4 +90,4 @@ static inline void arch_release_hugepage(struct page *page)
 {
 }
 
-#endif /* _ASM_X86_HUGETLB_H */
+#endif /* ASM_X86__HUGETLB_H */
diff --git a/include/asm-x86/hw_irq.h b/include/asm-x86/hw_irq.h
index 77ba51df5668..50f6e0316b50 100644
--- a/include/asm-x86/hw_irq.h
+++ b/include/asm-x86/hw_irq.h
@@ -1,5 +1,5 @@
-#ifndef _ASM_HW_IRQ_H
-#define _ASM_HW_IRQ_H
+#ifndef ASM_X86__HW_IRQ_H
+#define ASM_X86__HW_IRQ_H
 
 /*
  * (C) 1992, 1993 Linus Torvalds, (C) 1997 Ingo Molnar
@@ -64,7 +64,6 @@ extern unsigned long io_apic_irqs;
 extern void init_VISWS_APIC_irqs(void);
 extern void setup_IO_APIC(void);
 extern void disable_IO_APIC(void);
-extern void print_IO_APIC(void);
 extern int IO_APIC_get_PCI_irq_vector(int bus, int slot, int fn);
 extern void setup_ioapic_dest(void);
 
@@ -73,7 +72,9 @@ extern void enable_IO_APIC(void);
 #endif
 
 /* IPI functions */
+#ifdef CONFIG_X86_32
 extern void send_IPI_self(int vector);
+#endif
 extern void send_IPI(int dest, int vector);
 
 /* Statistics */
@@ -93,15 +94,43 @@ extern asmlinkage void qic_reschedule_interrupt(void);
 extern asmlinkage void qic_enable_irq_interrupt(void);
 extern asmlinkage void qic_call_function_interrupt(void);
 
+/* SMP */
+extern void smp_apic_timer_interrupt(struct pt_regs *);
+#ifdef CONFIG_X86_32
+extern void smp_spurious_interrupt(struct pt_regs *);
+extern void smp_error_interrupt(struct pt_regs *);
+#else
+extern asmlinkage void smp_spurious_interrupt(void);
+extern asmlinkage void smp_error_interrupt(void);
+#endif
+#ifdef CONFIG_X86_SMP
+extern void smp_reschedule_interrupt(struct pt_regs *);
+extern void smp_call_function_interrupt(struct pt_regs *);
+extern void smp_call_function_single_interrupt(struct pt_regs *);
+#ifdef CONFIG_X86_32
+extern void smp_invalidate_interrupt(struct pt_regs *);
+#else
+extern asmlinkage void smp_invalidate_interrupt(struct pt_regs *);
+#endif
+#endif
+
 #ifdef CONFIG_X86_32
 extern void (*const interrupt[NR_IRQS])(void);
 #else
 typedef int vector_irq_t[NR_VECTORS];
 DECLARE_PER_CPU(vector_irq_t, vector_irq);
-extern spinlock_t vector_lock;
 #endif
-extern void setup_vector_irq(int cpu);
+
+#if defined(CONFIG_X86_IO_APIC) && defined(CONFIG_X86_64)
+extern void lock_vector_lock(void);
+extern void unlock_vector_lock(void);
+extern void __setup_vector_irq(int cpu);
+#else
+static inline void lock_vector_lock(void) {}
+static inline void unlock_vector_lock(void) {}
+static inline void __setup_vector_irq(int cpu) {}
+#endif
 
 #endif /* !ASSEMBLY_ */
 
-#endif
+#endif /* ASM_X86__HW_IRQ_H */
diff --git a/include/asm-x86/hypertransport.h b/include/asm-x86/hypertransport.h
index d2bbd238b3e1..cc011a3bc1c2 100644
--- a/include/asm-x86/hypertransport.h
+++ b/include/asm-x86/hypertransport.h
@@ -1,5 +1,5 @@
-#ifndef ASM_HYPERTRANSPORT_H
-#define ASM_HYPERTRANSPORT_H
+#ifndef ASM_X86__HYPERTRANSPORT_H
+#define ASM_X86__HYPERTRANSPORT_H
 
 /*
  * Constants for x86 Hypertransport Interrupts.
@@ -42,4 +42,4 @@
 #define HT_IRQ_HIGH_DEST_ID(v)						\
 	((((v) >> 8) << HT_IRQ_HIGH_DEST_ID_SHIFT) & HT_IRQ_HIGH_DEST_ID_MASK)
 
-#endif /* ASM_HYPERTRANSPORT_H */
+#endif /* ASM_X86__HYPERTRANSPORT_H */
diff --git a/include/asm-x86/i387.h b/include/asm-x86/i387.h
index 96fa8449ff11..9ba862a4eac0 100644
--- a/include/asm-x86/i387.h
+++ b/include/asm-x86/i387.h
@@ -7,34 +7,44 @@
  * x86-64 work by Andi Kleen 2002
  */
 
-#ifndef _ASM_X86_I387_H
-#define _ASM_X86_I387_H
+#ifndef ASM_X86__I387_H
+#define ASM_X86__I387_H
 
 #include <linux/sched.h>
 #include <linux/kernel_stat.h>
 #include <linux/regset.h>
+#include <linux/hardirq.h>
 #include <asm/asm.h>
 #include <asm/processor.h>
 #include <asm/sigcontext.h>
 #include <asm/user.h>
 #include <asm/uaccess.h>
+#include <asm/xsave.h>
 
+extern unsigned int sig_xstate_size;
 extern void fpu_init(void);
 extern void mxcsr_feature_mask_init(void);
 extern int init_fpu(struct task_struct *child);
 extern asmlinkage void math_state_restore(void);
 extern void init_thread_xstate(void);
+extern int dump_fpu(struct pt_regs *, struct user_i387_struct *);
 
 extern user_regset_active_fn fpregs_active, xfpregs_active;
 extern user_regset_get_fn fpregs_get, xfpregs_get, fpregs_soft_get;
 extern user_regset_set_fn fpregs_set, xfpregs_set, fpregs_soft_set;
 
+extern struct _fpx_sw_bytes fx_sw_reserved;
 #ifdef CONFIG_IA32_EMULATION
+extern unsigned int sig_xstate_ia32_size;
+extern struct _fpx_sw_bytes fx_sw_reserved_ia32;
 struct _fpstate_ia32;
-extern int save_i387_ia32(struct _fpstate_ia32 __user *buf);
-extern int restore_i387_ia32(struct _fpstate_ia32 __user *buf);
+struct _xstate_ia32;
+extern int save_i387_xstate_ia32(void __user *buf);
+extern int restore_i387_xstate_ia32(void __user *buf);
 #endif
 
+#define X87_FSW_ES (1 << 7)	/* Exception Summary */
+
 #ifdef CONFIG_X86_64
 
 /* Ignore delayed exceptions from user space */
@@ -45,7 +55,7 @@ static inline void tolerant_fwait(void)
 		     _ASM_EXTABLE(1b, 2b));
 }
 
-static inline int restore_fpu_checking(struct i387_fxsave_struct *fx)
+static inline int fxrstor_checking(struct i387_fxsave_struct *fx)
 {
 	int err;
 
@@ -62,20 +72,34 @@ static inline int restore_fpu_checking(struct i387_fxsave_struct *fx)
 #else
 		     : [fx] "cdaSDb" (fx), "m" (*fx), "0" (0));
 #endif
-	if (unlikely(err))
-		init_fpu(current);
 	return err;
 }
 
-#define X87_FSW_ES (1 << 7)	/* Exception Summary */
+static inline int restore_fpu_checking(struct task_struct *tsk)
+{
+	if (task_thread_info(tsk)->status & TS_XSAVE)
+		return xrstor_checking(&tsk->thread.xstate->xsave);
+	else
+		return fxrstor_checking(&tsk->thread.xstate->fxsave);
+}
 
 /* AMD CPUs don't save/restore FDP/FIP/FOP unless an exception
    is pending. Clear the x87 state here by setting it to fixed
    values. The kernel data segment can be sometimes 0 and sometimes
    new user value. Both should be ok.
    Use the PDA as safe address because it should be already in L1. */
-static inline void clear_fpu_state(struct i387_fxsave_struct *fx)
+static inline void clear_fpu_state(struct task_struct *tsk)
 {
+	struct xsave_struct *xstate = &tsk->thread.xstate->xsave;
+	struct i387_fxsave_struct *fx = &tsk->thread.xstate->fxsave;
+
+	/*
+	 * xsave header may indicate the init state of the FP.
+	 */
+	if ((task_thread_info(tsk)->status & TS_XSAVE) &&
+	    !(xstate->xsave_hdr.xstate_bv & XSTATE_FP))
+		return;
+
 	if (unlikely(fx->swd & X87_FSW_ES))
 		asm volatile("fnclex");
 	alternative_input(ASM_NOP8 ASM_NOP2,
@@ -84,7 +108,7 @@ static inline void clear_fpu_state(struct i387_fxsave_struct *fx)
 			  X86_FEATURE_FXSAVE_LEAK);
 }
 
-static inline int save_i387_checking(struct i387_fxsave_struct __user *fx)
+static inline int fxsave_user(struct i387_fxsave_struct __user *fx)
 {
 	int err;
 
@@ -108,7 +132,7 @@ static inline int save_i387_checking(struct i387_fxsave_struct __user *fx)
 	return err;
 }
 
-static inline void __save_init_fpu(struct task_struct *tsk)
+static inline void fxsave(struct task_struct *tsk)
 {
 	/* Using "rex64; fxsave %0" is broken because, if the memory operand
 	   uses any extended registers for addressing, a second REX prefix
@@ -133,7 +157,16 @@ static inline void __save_init_fpu(struct task_struct *tsk)
 			     : "=m" (tsk->thread.xstate->fxsave)
 			     : "cdaSDb" (&tsk->thread.xstate->fxsave));
 #endif
-	clear_fpu_state(&tsk->thread.xstate->fxsave);
+}
+
+static inline void __save_init_fpu(struct task_struct *tsk)
+{
+	if (task_thread_info(tsk)->status & TS_XSAVE)
+		xsave(tsk);
+	else
+		fxsave(tsk);
+
+	clear_fpu_state(tsk);
 	task_thread_info(tsk)->status &= ~TS_USEDFPU;
 }
 
@@ -148,6 +181,10 @@ static inline void tolerant_fwait(void)
 
 static inline void restore_fpu(struct task_struct *tsk)
 {
+	if (task_thread_info(tsk)->status & TS_XSAVE) {
+		xrstor_checking(&tsk->thread.xstate->xsave);
+		return;
+	}
 	/*
 	 * The "nop" is needed to make the instructions the same
 	 * length.
@@ -173,6 +210,27 @@ static inline void restore_fpu(struct task_struct *tsk)
  */
 static inline void __save_init_fpu(struct task_struct *tsk)
 {
+	if (task_thread_info(tsk)->status & TS_XSAVE) {
+		struct xsave_struct *xstate = &tsk->thread.xstate->xsave;
+		struct i387_fxsave_struct *fx = &tsk->thread.xstate->fxsave;
+
+		xsave(tsk);
+
+		/*
+		 * xsave header may indicate the init state of the FP.
+		 */
+		if (!(xstate->xsave_hdr.xstate_bv & XSTATE_FP))
+			goto end;
+
+		if (unlikely(fx->swd & X87_FSW_ES))
+			asm volatile("fnclex");
+
+		/*
+		 * we can do a simple return here or be paranoid :)
+		 */
+		goto clear_state;
+	}
+
 	/* Use more nops than strictly needed in case the compiler
 	   varies code */
 	alternative_input(
@@ -182,6 +240,7 @@ static inline void __save_init_fpu(struct task_struct *tsk)
 		X86_FEATURE_FXSR,
 		[fx] "m" (tsk->thread.xstate->fxsave),
 		[fsw] "m" (tsk->thread.xstate->fxsave.swd) : "memory");
+clear_state:
 	/* AMD K7/K8 CPUs don't save/restore FDP/FIP/FOP unless an exception
 	   is pending.  Clear the x87 state here by setting it to fixed
 	   values. safe_address is a random variable that should be in L1 */
@@ -191,16 +250,17 @@ static inline void __save_init_fpu(struct task_struct *tsk)
 		"fildl %[addr]", 	/* set F?P to defined value */
 		X86_FEATURE_FXSAVE_LEAK,
 		[addr] "m" (safe_address));
+end:
 	task_thread_info(tsk)->status &= ~TS_USEDFPU;
 }
 
+#endif	/* CONFIG_X86_64 */
+
 /*
  * Signal frame handlers...
  */
-extern int save_i387(struct _fpstate __user *buf);
-extern int restore_i387(struct _fpstate __user *buf);
-
-#endif	/* CONFIG_X86_64 */
+extern int save_i387_xstate(void __user *buf);
+extern int restore_i387_xstate(void __user *buf);
 
 static inline void __unlazy_fpu(struct task_struct *tsk)
 {
@@ -236,6 +296,37 @@ static inline void kernel_fpu_end(void)
 	preempt_enable();
 }
 
+/*
+ * Some instructions like VIA's padlock instructions generate a spurious
+ * DNA fault but don't modify SSE registers. And these instructions
+ * get used from interrupt context aswell. To prevent these kernel instructions
+ * in interrupt context interact wrongly with other user/kernel fpu usage, we
+ * should use them only in the context of irq_ts_save/restore()
+ */
+static inline int irq_ts_save(void)
+{
+	/*
+	 * If we are in process context, we are ok to take a spurious DNA fault.
+	 * Otherwise, doing clts() in process context require pre-emption to
+	 * be disabled or some heavy lifting like kernel_fpu_begin()
+	 */
+	if (!in_interrupt())
+		return 0;
+
+	if (read_cr0() & X86_CR0_TS) {
+		clts();
+		return 1;
+	}
+
+	return 0;
+}
+
+static inline void irq_ts_restore(int TS_state)
+{
+	if (TS_state)
+		stts();
+}
+
 #ifdef CONFIG_X86_64
 
 static inline void save_init_fpu(struct task_struct *tsk)
@@ -306,4 +397,4 @@ static inline unsigned short get_fpu_mxcsr(struct task_struct *tsk)
 	}
 }
 
-#endif	/* _ASM_X86_I387_H */
+#endif /* ASM_X86__I387_H */
diff --git a/include/asm-x86/i8253.h b/include/asm-x86/i8253.h
index b51c0487fc41..15a5b530044e 100644
--- a/include/asm-x86/i8253.h
+++ b/include/asm-x86/i8253.h
@@ -1,5 +1,5 @@
-#ifndef __ASM_I8253_H__
-#define __ASM_I8253_H__
+#ifndef ASM_X86__I8253_H
+#define ASM_X86__I8253_H
 
 /* i8253A PIT registers */
 #define PIT_MODE		0x43
@@ -15,4 +15,4 @@ extern void setup_pit_timer(void);
 #define inb_pit		inb_p
 #define outb_pit	outb_p
 
-#endif	/* __ASM_I8253_H__ */
+#endif /* ASM_X86__I8253_H */
diff --git a/include/asm-x86/i8259.h b/include/asm-x86/i8259.h
index 2f98df91f1f2..23c1b3baaecd 100644
--- a/include/asm-x86/i8259.h
+++ b/include/asm-x86/i8259.h
@@ -1,5 +1,5 @@
-#ifndef __ASM_I8259_H__
-#define __ASM_I8259_H__
+#ifndef ASM_X86__I8259_H
+#define ASM_X86__I8259_H
 
 #include <linux/delay.h>
 
@@ -57,4 +57,7 @@ static inline void outb_pic(unsigned char value, unsigned int port)
 
 extern struct irq_chip i8259A_chip;
 
-#endif	/* __ASM_I8259_H__ */
+extern void mask_8259A(void);
+extern void unmask_8259A(void);
+
+#endif /* ASM_X86__I8259_H */
diff --git a/include/asm-x86/ia32.h b/include/asm-x86/ia32.h
index 55d3abe5276f..f932f7ad51dd 100644
--- a/include/asm-x86/ia32.h
+++ b/include/asm-x86/ia32.h
@@ -1,5 +1,5 @@
-#ifndef _ASM_X86_64_IA32_H
-#define _ASM_X86_64_IA32_H
+#ifndef ASM_X86__IA32_H
+#define ASM_X86__IA32_H
 
 
 #ifdef CONFIG_IA32_EMULATION
@@ -167,4 +167,4 @@ extern void ia32_pick_mmap_layout(struct mm_struct *mm);
 
 #endif /* !CONFIG_IA32_SUPPORT */
 
-#endif
+#endif /* ASM_X86__IA32_H */
diff --git a/include/asm-x86/ia32_unistd.h b/include/asm-x86/ia32_unistd.h
index 61cea9e7c5c1..dbd887d8a5a5 100644
--- a/include/asm-x86/ia32_unistd.h
+++ b/include/asm-x86/ia32_unistd.h
@@ -1,5 +1,5 @@
-#ifndef _ASM_X86_64_IA32_UNISTD_H_
-#define _ASM_X86_64_IA32_UNISTD_H_
+#ifndef ASM_X86__IA32_UNISTD_H
+#define ASM_X86__IA32_UNISTD_H
 
 /*
  * This file contains the system call numbers of the ia32 port,
@@ -15,4 +15,4 @@
 #define __NR_ia32_sigreturn	119
 #define __NR_ia32_rt_sigreturn	173
 
-#endif /* _ASM_X86_64_IA32_UNISTD_H_ */
+#endif /* ASM_X86__IA32_UNISTD_H */
diff --git a/include/asm-x86/idle.h b/include/asm-x86/idle.h
index d240e5b30a45..dc9c7944847b 100644
--- a/include/asm-x86/idle.h
+++ b/include/asm-x86/idle.h
@@ -1,5 +1,5 @@
-#ifndef _ASM_X86_64_IDLE_H
-#define _ASM_X86_64_IDLE_H 1
+#ifndef ASM_X86__IDLE_H
+#define ASM_X86__IDLE_H
 
 #define IDLE_START 1
 #define IDLE_END 2
@@ -10,4 +10,4 @@ void idle_notifier_register(struct notifier_block *n);
 void enter_idle(void);
 void exit_idle(void);
 
-#endif
+#endif /* ASM_X86__IDLE_H */
diff --git a/include/asm-x86/intel_arch_perfmon.h b/include/asm-x86/intel_arch_perfmon.h
index fa0fd068bc2e..07c03c6c9a16 100644
--- a/include/asm-x86/intel_arch_perfmon.h
+++ b/include/asm-x86/intel_arch_perfmon.h
@@ -1,5 +1,5 @@
-#ifndef _ASM_X86_INTEL_ARCH_PERFMON_H
-#define _ASM_X86_INTEL_ARCH_PERFMON_H
+#ifndef ASM_X86__INTEL_ARCH_PERFMON_H
+#define ASM_X86__INTEL_ARCH_PERFMON_H
 
 #define MSR_ARCH_PERFMON_PERFCTR0		0xc1
 #define MSR_ARCH_PERFMON_PERFCTR1		0xc2
@@ -28,4 +28,4 @@ union cpuid10_eax {
 	unsigned int full;
 };
 
-#endif /* _ASM_X86_INTEL_ARCH_PERFMON_H */
+#endif /* ASM_X86__INTEL_ARCH_PERFMON_H */
diff --git a/include/asm-x86/io.h b/include/asm-x86/io.h
index bf5d629b3a39..72b7719523bf 100644
--- a/include/asm-x86/io.h
+++ b/include/asm-x86/io.h
@@ -1,5 +1,5 @@
-#ifndef _ASM_X86_IO_H
-#define _ASM_X86_IO_H
+#ifndef ASM_X86__IO_H
+#define ASM_X86__IO_H
 
 #define ARCH_HAS_IOREMAP_WC
 
@@ -21,7 +21,7 @@ extern void __iomem *fix_ioremap(unsigned idx, unsigned long phys);
 
 #define build_mmio_read(name, size, type, reg, barrier) \
 static inline type name(const volatile void __iomem *addr) \
-{ type ret; asm volatile("mov" size " %1,%0":"=" reg (ret) \
+{ type ret; asm volatile("mov" size " %1,%0":reg (ret) \
 :"m" (*(volatile type __force *)addr) barrier); return ret; }
 
 #define build_mmio_write(name, size, type, reg, barrier) \
@@ -29,13 +29,13 @@ static inline void name(type val, volatile void __iomem *addr) \
 { asm volatile("mov" size " %0,%1": :reg (val), \
 "m" (*(volatile type __force *)addr) barrier); }
 
-build_mmio_read(readb, "b", unsigned char, "q", :"memory")
-build_mmio_read(readw, "w", unsigned short, "r", :"memory")
-build_mmio_read(readl, "l", unsigned int, "r", :"memory")
+build_mmio_read(readb, "b", unsigned char, "=q", :"memory")
+build_mmio_read(readw, "w", unsigned short, "=r", :"memory")
+build_mmio_read(readl, "l", unsigned int, "=r", :"memory")
 
-build_mmio_read(__readb, "b", unsigned char, "q", )
-build_mmio_read(__readw, "w", unsigned short, "r", )
-build_mmio_read(__readl, "l", unsigned int, "r", )
+build_mmio_read(__readb, "b", unsigned char, "=q", )
+build_mmio_read(__readw, "w", unsigned short, "=r", )
+build_mmio_read(__readl, "l", unsigned int, "=r", )
 
 build_mmio_write(writeb, "b", unsigned char, "q", :"memory")
 build_mmio_write(writew, "w", unsigned short, "r", :"memory")
@@ -59,8 +59,8 @@ build_mmio_write(__writel, "l", unsigned int, "r", )
 #define mmiowb() barrier()
 
 #ifdef CONFIG_X86_64
-build_mmio_read(readq, "q", unsigned long, "r", :"memory")
-build_mmio_read(__readq, "q", unsigned long, "r", )
+build_mmio_read(readq, "q", unsigned long, "=r", :"memory")
+build_mmio_read(__readq, "q", unsigned long, "=r", )
 build_mmio_write(writeq, "q", unsigned long, "r", :"memory")
 build_mmio_write(__writeq, "q", unsigned long, "r", )
 
@@ -73,6 +73,8 @@ build_mmio_write(__writeq, "q", unsigned long, "r", )
 #define writeq writeq
 #endif
 
+extern int iommu_bio_merge;
+
 #ifdef CONFIG_X86_32
 # include "io_32.h"
 #else
@@ -99,4 +101,4 @@ extern void early_iounmap(void *addr, unsigned long size);
 extern void __iomem *fix_ioremap(unsigned idx, unsigned long phys);
 
 
-#endif /* _ASM_X86_IO_H */
+#endif /* ASM_X86__IO_H */
diff --git a/include/asm-x86/io_32.h b/include/asm-x86/io_32.h
index e876d89ac156..4f7d878bda18 100644
--- a/include/asm-x86/io_32.h
+++ b/include/asm-x86/io_32.h
@@ -1,5 +1,5 @@
-#ifndef _ASM_IO_H
-#define _ASM_IO_H
+#ifndef ASM_X86__IO_32_H
+#define ASM_X86__IO_32_H
 
 #include <linux/string.h>
 #include <linux/compiler.h>
@@ -281,4 +281,4 @@ BUILDIO(b, b, char)
 BUILDIO(w, w, short)
 BUILDIO(l, , int)
 
-#endif
+#endif /* ASM_X86__IO_32_H */
diff --git a/include/asm-x86/io_64.h b/include/asm-x86/io_64.h
index 22995c5c5adc..64429e9431a8 100644
--- a/include/asm-x86/io_64.h
+++ b/include/asm-x86/io_64.h
@@ -1,5 +1,5 @@
-#ifndef _ASM_IO_H
-#define _ASM_IO_H
+#ifndef ASM_X86__IO_64_H
+#define ASM_X86__IO_64_H
 
 
 /*
@@ -235,7 +235,6 @@ void memset_io(volatile void __iomem *a, int b, size_t c);
 
 #define flush_write_buffers()
 
-extern int iommu_bio_merge;
 #define BIO_VMERGE_BOUNDARY iommu_bio_merge
 
 /*
@@ -245,4 +244,4 @@ extern int iommu_bio_merge;
 
 #endif /* __KERNEL__ */
 
-#endif
+#endif /* ASM_X86__IO_64_H */
diff --git a/include/asm-x86/io_apic.h b/include/asm-x86/io_apic.h
index 14f82bbcb5fd..8ec68a50cf10 100644
--- a/include/asm-x86/io_apic.h
+++ b/include/asm-x86/io_apic.h
@@ -1,5 +1,5 @@
-#ifndef __ASM_IO_APIC_H
-#define __ASM_IO_APIC_H
+#ifndef ASM_X86__IO_APIC_H
+#define ASM_X86__IO_APIC_H
 
 #include <linux/types.h>
 #include <asm/mpspec.h>
@@ -107,6 +107,20 @@ struct IO_APIC_route_entry {
 
 } __attribute__ ((packed));
 
+struct IR_IO_APIC_route_entry {
+	__u64	vector		: 8,
+		zero		: 3,
+		index2		: 1,
+		delivery_status : 1,
+		polarity	: 1,
+		irr		: 1,
+		trigger		: 1,
+		mask		: 1,
+		reserved	: 31,
+		format		: 1,
+		index		: 15;
+} __attribute__ ((packed));
+
 #ifdef CONFIG_X86_IO_APIC
 
 /*
@@ -183,10 +197,16 @@ extern int io_apic_set_pci_routing(int ioapic, int pin, int irq,
 extern int (*ioapic_renumber_irq)(int ioapic, int irq);
 extern void ioapic_init_mappings(void);
 
+#ifdef CONFIG_X86_64
+extern int save_mask_IO_APIC_setup(void);
+extern void restore_IO_APIC_setup(void);
+extern void reinit_intr_remapped_IO_APIC(int);
+#endif
+
 #else  /* !CONFIG_X86_IO_APIC */
 #define io_apic_assign_pci_irqs 0
 static const int timer_through_8259 = 0;
 static inline void ioapic_init_mappings(void) { }
 #endif
 
-#endif
+#endif /* ASM_X86__IO_APIC_H */
diff --git a/include/asm-x86/ioctls.h b/include/asm-x86/ioctls.h
index c0c338bd4068..336603512399 100644
--- a/include/asm-x86/ioctls.h
+++ b/include/asm-x86/ioctls.h
@@ -1,5 +1,5 @@
-#ifndef _ASM_X86_IOCTLS_H
-#define _ASM_X86_IOCTLS_H
+#ifndef ASM_X86__IOCTLS_H
+#define ASM_X86__IOCTLS_H
 
 #include <asm/ioctl.h>
 
@@ -85,4 +85,4 @@
 
 #define TIOCSER_TEMT    0x01	/* Transmitter physically empty */
 
-#endif
+#endif /* ASM_X86__IOCTLS_H */
diff --git a/include/asm-x86/iommu.h b/include/asm-x86/iommu.h
index d63166fb3ab7..e86f44148c66 100644
--- a/include/asm-x86/iommu.h
+++ b/include/asm-x86/iommu.h
@@ -1,11 +1,14 @@
-#ifndef _ASM_X8664_IOMMU_H
-#define _ASM_X8664_IOMMU_H 1
+#ifndef ASM_X86__IOMMU_H
+#define ASM_X86__IOMMU_H
 
 extern void pci_iommu_shutdown(void);
 extern void no_iommu_init(void);
+extern struct dma_mapping_ops nommu_dma_ops;
 extern int force_iommu, no_iommu;
 extern int iommu_detected;
 
+extern unsigned long iommu_num_pages(unsigned long addr, unsigned long len);
+
 #ifdef CONFIG_GART_IOMMU
 extern int gart_iommu_aperture;
 extern int gart_iommu_aperture_allowed;
@@ -39,4 +42,4 @@ static inline void gart_iommu_hole_init(void)
 }
 #endif
 
-#endif
+#endif /* ASM_X86__IOMMU_H */
diff --git a/include/asm-x86/ipcbuf.h b/include/asm-x86/ipcbuf.h
index ee678fd51594..910304fbdc8f 100644
--- a/include/asm-x86/ipcbuf.h
+++ b/include/asm-x86/ipcbuf.h
@@ -1,5 +1,5 @@
-#ifndef _ASM_X86_IPCBUF_H
-#define _ASM_X86_IPCBUF_H
+#ifndef ASM_X86__IPCBUF_H
+#define ASM_X86__IPCBUF_H
 
 /*
  * The ipc64_perm structure for x86 architecture.
@@ -25,4 +25,4 @@ struct ipc64_perm {
 	unsigned long		__unused2;
 };
 
-#endif /* _ASM_X86_IPCBUF_H */
+#endif /* ASM_X86__IPCBUF_H */
diff --git a/include/asm-x86/ipi.h b/include/asm-x86/ipi.h
index bb1c09f7a76c..30a692cfaff8 100644
--- a/include/asm-x86/ipi.h
+++ b/include/asm-x86/ipi.h
@@ -1,5 +1,5 @@
-#ifndef __ASM_IPI_H
-#define __ASM_IPI_H
+#ifndef ASM_X86__IPI_H
+#define ASM_X86__IPI_H
 
 /*
  * Copyright 2004 James Cleverdon, IBM.
@@ -49,6 +49,12 @@ static inline int __prepare_ICR2(unsigned int mask)
 	return SET_APIC_DEST_FIELD(mask);
 }
 
+static inline void __xapic_wait_icr_idle(void)
+{
+	while (native_apic_mem_read(APIC_ICR) & APIC_ICR_BUSY)
+		cpu_relax();
+}
+
 static inline void __send_IPI_shortcut(unsigned int shortcut, int vector,
 				       unsigned int dest)
 {
@@ -64,7 +70,7 @@ static inline void __send_IPI_shortcut(unsigned int shortcut, int vector,
 	/*
 	 * Wait for idle.
 	 */
-	apic_wait_icr_idle();
+	__xapic_wait_icr_idle();
 
 	/*
 	 * No need to touch the target chip field
@@ -74,7 +80,7 @@ static inline void __send_IPI_shortcut(unsigned int shortcut, int vector,
 	/*
 	 * Send the IPI. The write to APIC_ICR fires this off.
 	 */
-	apic_write(APIC_ICR, cfg);
+	native_apic_mem_write(APIC_ICR, cfg);
 }
 
 /*
@@ -92,13 +98,13 @@ static inline void __send_IPI_dest_field(unsigned int mask, int vector,
 	if (unlikely(vector == NMI_VECTOR))
 		safe_apic_wait_icr_idle();
 	else
-		apic_wait_icr_idle();
+		__xapic_wait_icr_idle();
 
 	/*
 	 * prepare target chip field
 	 */
 	cfg = __prepare_ICR2(mask);
-	apic_write(APIC_ICR2, cfg);
+	native_apic_mem_write(APIC_ICR2, cfg);
 
 	/*
 	 * program the ICR
@@ -108,7 +114,7 @@ static inline void __send_IPI_dest_field(unsigned int mask, int vector,
 	/*
 	 * Send the IPI. The write to APIC_ICR fires this off.
 	 */
-	apic_write(APIC_ICR, cfg);
+	native_apic_mem_write(APIC_ICR, cfg);
 }
 
 static inline void send_IPI_mask_sequence(cpumask_t mask, int vector)
@@ -129,4 +135,4 @@ static inline void send_IPI_mask_sequence(cpumask_t mask, int vector)
 	local_irq_restore(flags);
 }
 
-#endif /* __ASM_IPI_H */
+#endif /* ASM_X86__IPI_H */
diff --git a/include/asm-x86/irq.h b/include/asm-x86/irq.h
index 1a2925757317..1e5f2909c1db 100644
--- a/include/asm-x86/irq.h
+++ b/include/asm-x86/irq.h
@@ -1,5 +1,5 @@
-#ifndef _ASM_IRQ_H
-#define _ASM_IRQ_H
+#ifndef ASM_X86__IRQ_H
+#define ASM_X86__IRQ_H
 /*
  *	(C) 1992, 1993 Linus Torvalds, (C) 1997 Ingo Molnar
  *
@@ -47,4 +47,4 @@ extern void native_init_IRQ(void);
 /* Interrupt vector management */
 extern DECLARE_BITMAP(used_vectors, NR_VECTORS);
 
-#endif /* _ASM_IRQ_H */
+#endif /* ASM_X86__IRQ_H */
diff --git a/include/asm-x86/irq_regs_32.h b/include/asm-x86/irq_regs_32.h
index 3368b20c0b48..316a3b258871 100644
--- a/include/asm-x86/irq_regs_32.h
+++ b/include/asm-x86/irq_regs_32.h
@@ -4,8 +4,8 @@
  *
  * Jeremy Fitzhardinge <jeremy@goop.org>
  */
-#ifndef _ASM_I386_IRQ_REGS_H
-#define _ASM_I386_IRQ_REGS_H
+#ifndef ASM_X86__IRQ_REGS_32_H
+#define ASM_X86__IRQ_REGS_32_H
 
 #include <asm/percpu.h>
 
@@ -26,4 +26,4 @@ static inline struct pt_regs *set_irq_regs(struct pt_regs *new_regs)
 	return old_regs;
 }
 
-#endif /* _ASM_I386_IRQ_REGS_H */
+#endif /* ASM_X86__IRQ_REGS_32_H */
diff --git a/include/asm-x86/irq_remapping.h b/include/asm-x86/irq_remapping.h
new file mode 100644
index 000000000000..78242c6ffa58
--- /dev/null
+++ b/include/asm-x86/irq_remapping.h
@@ -0,0 +1,8 @@
+#ifndef _ASM_IRQ_REMAPPING_H
+#define _ASM_IRQ_REMAPPING_H
+
+extern int x2apic;
+
+#define IRTE_DEST(dest) ((x2apic) ? dest : dest << 8)
+
+#endif
diff --git a/include/asm-x86/irq_vectors.h b/include/asm-x86/irq_vectors.h
index 90b1d1f12f08..c5d2d767a1f3 100644
--- a/include/asm-x86/irq_vectors.h
+++ b/include/asm-x86/irq_vectors.h
@@ -1,5 +1,5 @@
-#ifndef _ASM_IRQ_VECTORS_H
-#define _ASM_IRQ_VECTORS_H
+#ifndef ASM_X86__IRQ_VECTORS_H
+#define ASM_X86__IRQ_VECTORS_H
 
 #include <linux/threads.h>
 
@@ -76,6 +76,7 @@
 #define CALL_FUNCTION_SINGLE_VECTOR	0xfb
 #define THERMAL_APIC_VECTOR		0xfa
 #define THRESHOLD_APIC_VECTOR		0xf9
+#define UV_BAU_MESSAGE			0xf8
 #define INVALIDATE_TLB_VECTOR_END	0xf7
 #define INVALIDATE_TLB_VECTOR_START	0xf0	/* f0-f7 used for TLB flush */
 
@@ -109,7 +110,15 @@
 #define LAST_VM86_IRQ		15
 #define invalid_vm86_irq(irq)	((irq) < 3 || (irq) > 15)
 
-#if !defined(CONFIG_X86_VOYAGER)
+#ifdef CONFIG_X86_64
+# if NR_CPUS < MAX_IO_APICS
+#  define NR_IRQS (NR_VECTORS + (32 * NR_CPUS))
+# else
+#  define NR_IRQS (NR_VECTORS + (32 * MAX_IO_APICS))
+# endif
+# define NR_IRQ_VECTORS NR_IRQS
+
+#elif !defined(CONFIG_X86_VOYAGER)
 
 # if defined(CONFIG_X86_IO_APIC) || defined(CONFIG_PARAVIRT) || defined(CONFIG_X86_VISWS)
 
@@ -170,4 +179,4 @@
 #define VIC_CPU_BOOT_ERRATA_CPI		(VIC_CPI_LEVEL0 + 8)
 
 
-#endif /* _ASM_IRQ_VECTORS_H */
+#endif /* ASM_X86__IRQ_VECTORS_H */
diff --git a/include/asm-x86/ist.h b/include/asm-x86/ist.h
index 6ec6ceed95a7..35a2fe9bc921 100644
--- a/include/asm-x86/ist.h
+++ b/include/asm-x86/ist.h
@@ -1,5 +1,5 @@
-#ifndef _ASM_IST_H
-#define _ASM_IST_H
+#ifndef ASM_X86__IST_H
+#define ASM_X86__IST_H
 
 /*
  * Include file for the interface to IST BIOS
@@ -31,4 +31,4 @@ struct ist_info {
 extern struct ist_info ist_info;
 
 #endif	/* __KERNEL__ */
-#endif	/* _ASM_IST_H */
+#endif /* ASM_X86__IST_H */
diff --git a/include/asm-x86/k8.h b/include/asm-x86/k8.h
index 452e2b696ff4..2bbaf4370a55 100644
--- a/include/asm-x86/k8.h
+++ b/include/asm-x86/k8.h
@@ -1,5 +1,5 @@
-#ifndef _ASM_K8_H
-#define _ASM_K8_H 1
+#ifndef ASM_X86__K8_H
+#define ASM_X86__K8_H
 
 #include <linux/pci.h>
 
@@ -12,4 +12,4 @@ extern int cache_k8_northbridges(void);
 extern void k8_flush_garts(void);
 extern int k8_scan_nodes(unsigned long start, unsigned long end);
 
-#endif
+#endif /* ASM_X86__K8_H */
diff --git a/include/asm-x86/kdebug.h b/include/asm-x86/kdebug.h
index 96651bb59ba1..5ec3ad3e825c 100644
--- a/include/asm-x86/kdebug.h
+++ b/include/asm-x86/kdebug.h
@@ -1,5 +1,5 @@
-#ifndef _ASM_X86_KDEBUG_H
-#define _ASM_X86_KDEBUG_H
+#ifndef ASM_X86__KDEBUG_H
+#define ASM_X86__KDEBUG_H
 
 #include <linux/notifier.h>
 
@@ -35,4 +35,4 @@ extern void show_regs(struct pt_regs *regs);
 extern unsigned long oops_begin(void);
 extern void oops_end(unsigned long, struct pt_regs *, int signr);
 
-#endif
+#endif /* ASM_X86__KDEBUG_H */
diff --git a/include/asm-x86/kexec.h b/include/asm-x86/kexec.h
index 8f855a15f64d..ea09600d6129 100644
--- a/include/asm-x86/kexec.h
+++ b/include/asm-x86/kexec.h
@@ -1,5 +1,5 @@
-#ifndef _KEXEC_H
-#define _KEXEC_H
+#ifndef ASM_X86__KEXEC_H
+#define ASM_X86__KEXEC_H
 
 #ifdef CONFIG_X86_32
 # define PA_CONTROL_PAGE	0
@@ -10,14 +10,15 @@
 # define VA_PTE_0		5
 # define PA_PTE_1		6
 # define VA_PTE_1		7
+# define PA_SWAP_PAGE		8
 # ifdef CONFIG_X86_PAE
-#  define PA_PMD_0		8
-#  define VA_PMD_0		9
-#  define PA_PMD_1		10
-#  define VA_PMD_1		11
-#  define PAGES_NR		12
+#  define PA_PMD_0		9
+#  define VA_PMD_0		10
+#  define PA_PMD_1		11
+#  define VA_PMD_1		12
+#  define PAGES_NR		13
 # else
-#  define PAGES_NR		8
+#  define PAGES_NR		9
 # endif
 #else
 # define PA_CONTROL_PAGE	0
@@ -40,6 +41,10 @@
 # define PAGES_NR		17
 #endif
 
+#ifdef CONFIG_X86_32
+# define KEXEC_CONTROL_CODE_MAX_SIZE	2048
+#endif
+
 #ifndef __ASSEMBLY__
 
 #include <linux/string.h>
@@ -62,7 +67,7 @@
 /* Maximum address we can use for the control code buffer */
 # define KEXEC_CONTROL_MEMORY_LIMIT TASK_SIZE
 
-# define KEXEC_CONTROL_CODE_SIZE	4096
+# define KEXEC_CONTROL_PAGE_SIZE	4096
 
 /* The native architecture */
 # define KEXEC_ARCH KEXEC_ARCH_386
@@ -78,7 +83,7 @@
 # define KEXEC_CONTROL_MEMORY_LIMIT     (0xFFFFFFFFFFUL)
 
 /* Allocate one page for the pdp and the second for the code */
-# define KEXEC_CONTROL_CODE_SIZE  (4096UL + 4096UL)
+# define KEXEC_CONTROL_PAGE_SIZE  (4096UL + 4096UL)
 
 /* The native architecture */
 # define KEXEC_ARCH KEXEC_ARCH_X86_64
@@ -152,11 +157,12 @@ static inline void crash_setup_regs(struct pt_regs *newregs,
 }
 
 #ifdef CONFIG_X86_32
-asmlinkage NORET_TYPE void
+asmlinkage unsigned long
 relocate_kernel(unsigned long indirection_page,
 		unsigned long control_page,
 		unsigned long start_address,
-		unsigned int has_pae) ATTRIB_NORET;
+		unsigned int has_pae,
+		unsigned int preserve_context);
 #else
 NORET_TYPE void
 relocate_kernel(unsigned long indirection_page,
@@ -166,4 +172,4 @@ relocate_kernel(unsigned long indirection_page,
 
 #endif /* __ASSEMBLY__ */
 
-#endif /* _KEXEC_H */
+#endif /* ASM_X86__KEXEC_H */
diff --git a/include/asm-x86/kgdb.h b/include/asm-x86/kgdb.h
index 484c47554f3b..83a7ee228ab1 100644
--- a/include/asm-x86/kgdb.h
+++ b/include/asm-x86/kgdb.h
@@ -1,5 +1,5 @@
-#ifndef _ASM_KGDB_H_
-#define _ASM_KGDB_H_
+#ifndef ASM_X86__KGDB_H
+#define ASM_X86__KGDB_H
 
 /*
  * Copyright (C) 2001-2004 Amit S. Kale
@@ -78,4 +78,4 @@ static inline void arch_kgdb_breakpoint(void)
 #define BREAK_INSTR_SIZE	1
 #define CACHE_FLUSH_IS_SAFE	1
 
-#endif				/* _ASM_KGDB_H_ */
+#endif /* ASM_X86__KGDB_H */
diff --git a/include/asm-x86/kmap_types.h b/include/asm-x86/kmap_types.h
index 5f4174132a22..89f44493e643 100644
--- a/include/asm-x86/kmap_types.h
+++ b/include/asm-x86/kmap_types.h
@@ -1,5 +1,5 @@
-#ifndef _ASM_X86_KMAP_TYPES_H
-#define _ASM_X86_KMAP_TYPES_H
+#ifndef ASM_X86__KMAP_TYPES_H
+#define ASM_X86__KMAP_TYPES_H
 
 #if defined(CONFIG_X86_32) && defined(CONFIG_DEBUG_HIGHMEM)
 # define D(n) __KM_FENCE_##n ,
@@ -26,4 +26,4 @@ D(13)	KM_TYPE_NR
 
 #undef D
 
-#endif
+#endif /* ASM_X86__KMAP_TYPES_H */
diff --git a/include/asm-x86/kprobes.h b/include/asm-x86/kprobes.h
index 54980b0b3892..bd8407863c13 100644
--- a/include/asm-x86/kprobes.h
+++ b/include/asm-x86/kprobes.h
@@ -1,5 +1,5 @@
-#ifndef _ASM_KPROBES_H
-#define _ASM_KPROBES_H
+#ifndef ASM_X86__KPROBES_H
+#define ASM_X86__KPROBES_H
 /*
  *  Kernel Probes (KProbes)
  *
@@ -94,4 +94,4 @@ static inline void restore_interrupts(struct pt_regs *regs)
 extern int kprobe_fault_handler(struct pt_regs *regs, int trapnr);
 extern int kprobe_exceptions_notify(struct notifier_block *self,
 				    unsigned long val, void *data);
-#endif				/* _ASM_KPROBES_H */
+#endif /* ASM_X86__KPROBES_H */
diff --git a/include/asm-x86/kvm.h b/include/asm-x86/kvm.h
index 6f1840812e59..78e954db1e7f 100644
--- a/include/asm-x86/kvm.h
+++ b/include/asm-x86/kvm.h
@@ -1,5 +1,5 @@
-#ifndef __LINUX_KVM_X86_H
-#define __LINUX_KVM_X86_H
+#ifndef ASM_X86__KVM_H
+#define ASM_X86__KVM_H
 
 /*
  * KVM x86 specific structures and definitions
@@ -230,4 +230,4 @@ struct kvm_pit_state {
 #define KVM_TRC_APIC_ACCESS      (KVM_TRC_HANDLER + 0x14)
 #define KVM_TRC_TDP_FAULT        (KVM_TRC_HANDLER + 0x15)
 
-#endif
+#endif /* ASM_X86__KVM_H */
diff --git a/include/asm-x86/kvm_host.h b/include/asm-x86/kvm_host.h
index fdde0bedaa90..69794547f514 100644
--- a/include/asm-x86/kvm_host.h
+++ b/include/asm-x86/kvm_host.h
@@ -1,4 +1,4 @@
-#/*
+/*
  * Kernel-based Virtual Machine driver for Linux
  *
  * This header defines architecture specific interfaces, x86 version
@@ -8,11 +8,12 @@
  *
  */
 
-#ifndef ASM_KVM_HOST_H
-#define ASM_KVM_HOST_H
+#ifndef ASM_X86__KVM_HOST_H
+#define ASM_X86__KVM_HOST_H
 
 #include <linux/types.h>
 #include <linux/mm.h>
+#include <linux/mmu_notifier.h>
 
 #include <linux/kvm.h>
 #include <linux/kvm_para.h>
@@ -251,6 +252,7 @@ struct kvm_vcpu_arch {
 		gfn_t gfn;	/* presumed gfn during guest pte update */
 		pfn_t pfn;	/* pfn corresponding to that gfn */
 		int largepage;
+		unsigned long mmu_seq;
 	} update_pte;
 
 	struct i387_fxsave_struct host_fx_image;
@@ -556,6 +558,7 @@ int kvm_fix_hypercall(struct kvm_vcpu *vcpu);
 int kvm_mmu_page_fault(struct kvm_vcpu *vcpu, gva_t gva, u32 error_code);
 
 void kvm_enable_tdp(void);
+void kvm_disable_tdp(void);
 
 int load_pdptrs(struct kvm_vcpu *vcpu, unsigned long cr3);
 int complete_pio(struct kvm_vcpu *vcpu);
@@ -719,7 +722,7 @@ asmlinkage void kvm_handle_fault_on_reboot(void);
 
 #define __kvm_handle_fault_on_reboot(insn) \
 	"666: " insn "\n\t" \
-	".pushsection .text.fixup, \"ax\" \n" \
+	".pushsection .fixup, \"ax\" \n" \
 	"667: \n\t" \
 	KVM_EX_PUSH " $666b \n\t" \
 	"jmp kvm_handle_fault_on_reboot \n\t" \
@@ -728,4 +731,8 @@ asmlinkage void kvm_handle_fault_on_reboot(void);
 	KVM_EX_ENTRY " 666b, 667b \n\t" \
 	".popsection"
 
-#endif
+#define KVM_ARCH_WANT_MMU_NOTIFIER
+int kvm_unmap_hva(struct kvm *kvm, unsigned long hva);
+int kvm_age_hva(struct kvm *kvm, unsigned long hva);
+
+#endif /* ASM_X86__KVM_HOST_H */
diff --git a/include/asm-x86/kvm_para.h b/include/asm-x86/kvm_para.h
index 76f392146daa..30054fded4fb 100644
--- a/include/asm-x86/kvm_para.h
+++ b/include/asm-x86/kvm_para.h
@@ -1,5 +1,5 @@
-#ifndef __X86_KVM_PARA_H
-#define __X86_KVM_PARA_H
+#ifndef ASM_X86__KVM_PARA_H
+#define ASM_X86__KVM_PARA_H
 
 /* This CPUID returns the signature 'KVMKVMKVM' in ebx, ecx, and edx.  It
  * should be used to determine that a VM is running under KVM.
@@ -144,4 +144,4 @@ static inline unsigned int kvm_arch_para_features(void)
 
 #endif
 
-#endif
+#endif /* ASM_X86__KVM_PARA_H */
diff --git a/include/asm-x86/kvm_x86_emulate.h b/include/asm-x86/kvm_x86_emulate.h
index 4e8c1e48d91d..e2d9b030c1ac 100644
--- a/include/asm-x86/kvm_x86_emulate.h
+++ b/include/asm-x86/kvm_x86_emulate.h
@@ -8,8 +8,8 @@
  * From: xen-unstable 10676:af9809f51f81a3c43f276f00c81a52ef558afda4
  */
 
-#ifndef __X86_EMULATE_H__
-#define __X86_EMULATE_H__
+#ifndef ASM_X86__KVM_X86_EMULATE_H
+#define ASM_X86__KVM_X86_EMULATE_H
 
 struct x86_emulate_ctxt;
 
@@ -181,4 +181,4 @@ int x86_decode_insn(struct x86_emulate_ctxt *ctxt,
 int x86_emulate_insn(struct x86_emulate_ctxt *ctxt,
 		     struct x86_emulate_ops *ops);
 
-#endif				/* __X86_EMULATE_H__ */
+#endif /* ASM_X86__KVM_X86_EMULATE_H */
diff --git a/include/asm-x86/ldt.h b/include/asm-x86/ldt.h
index 20c597242b53..a5228504d867 100644
--- a/include/asm-x86/ldt.h
+++ b/include/asm-x86/ldt.h
@@ -3,8 +3,8 @@
  *
  * Definitions of structures used with the modify_ldt system call.
  */
-#ifndef _ASM_X86_LDT_H
-#define _ASM_X86_LDT_H
+#ifndef ASM_X86__LDT_H
+#define ASM_X86__LDT_H
 
 /* Maximum number of LDT entries supported. */
 #define LDT_ENTRIES	8192
@@ -37,4 +37,4 @@ struct user_desc {
 #define MODIFY_LDT_CONTENTS_CODE	2
 
 #endif /* !__ASSEMBLY__ */
-#endif
+#endif /* ASM_X86__LDT_H */
diff --git a/include/asm-x86/lguest.h b/include/asm-x86/lguest.h
index be4a7247fa2b..7505e947ed27 100644
--- a/include/asm-x86/lguest.h
+++ b/include/asm-x86/lguest.h
@@ -1,5 +1,5 @@
-#ifndef _X86_LGUEST_H
-#define _X86_LGUEST_H
+#ifndef ASM_X86__LGUEST_H
+#define ASM_X86__LGUEST_H
 
 #define GDT_ENTRY_LGUEST_CS	10
 #define GDT_ENTRY_LGUEST_DS	11
@@ -91,4 +91,4 @@ static inline void lguest_set_ts(void)
 
 #endif /* __ASSEMBLY__ */
 
-#endif
+#endif /* ASM_X86__LGUEST_H */
diff --git a/include/asm-x86/lguest_hcall.h b/include/asm-x86/lguest_hcall.h
index a3241f28e34a..8f034ba4b53e 100644
--- a/include/asm-x86/lguest_hcall.h
+++ b/include/asm-x86/lguest_hcall.h
@@ -1,6 +1,6 @@
 /* Architecture specific portion of the lguest hypercalls */
-#ifndef _X86_LGUEST_HCALL_H
-#define _X86_LGUEST_HCALL_H
+#ifndef ASM_X86__LGUEST_HCALL_H
+#define ASM_X86__LGUEST_HCALL_H
 
 #define LHCALL_FLUSH_ASYNC	0
 #define LHCALL_LGUEST_INIT	1
@@ -68,4 +68,4 @@ struct hcall_args {
 };
 
 #endif /* !__ASSEMBLY__ */
-#endif	/* _I386_LGUEST_HCALL_H */
+#endif /* ASM_X86__LGUEST_HCALL_H */
diff --git a/include/asm-x86/linkage.h b/include/asm-x86/linkage.h
index 64e444f8e85b..42d8b62ee8ab 100644
--- a/include/asm-x86/linkage.h
+++ b/include/asm-x86/linkage.h
@@ -1,5 +1,5 @@
-#ifndef __ASM_LINKAGE_H
-#define __ASM_LINKAGE_H
+#ifndef ASM_X86__LINKAGE_H
+#define ASM_X86__LINKAGE_H
 
 #undef notrace
 #define notrace __attribute__((no_instrument_function))
@@ -57,5 +57,5 @@
 #define __ALIGN_STR ".align 16,0x90"
 #endif
 
-#endif
+#endif /* ASM_X86__LINKAGE_H */
 
diff --git a/include/asm-x86/local.h b/include/asm-x86/local.h
index 330a72496abd..ae91994fd6c9 100644
--- a/include/asm-x86/local.h
+++ b/include/asm-x86/local.h
@@ -1,5 +1,5 @@
-#ifndef _ARCH_LOCAL_H
-#define _ARCH_LOCAL_H
+#ifndef ASM_X86__LOCAL_H
+#define ASM_X86__LOCAL_H
 
 #include <linux/percpu.h>
 
@@ -232,4 +232,4 @@ static inline long local_sub_return(long i, local_t *l)
 #define __cpu_local_add(i, l)	cpu_local_add((i), (l))
 #define __cpu_local_sub(i, l)	cpu_local_sub((i), (l))
 
-#endif /* _ARCH_LOCAL_H */
+#endif /* ASM_X86__LOCAL_H */
diff --git a/include/asm-x86/mach-bigsmp/mach_apic.h b/include/asm-x86/mach-bigsmp/mach_apic.h
deleted file mode 100644
index c3b9dc6970c9..000000000000
--- a/include/asm-x86/mach-bigsmp/mach_apic.h
+++ /dev/null
@@ -1,144 +0,0 @@
-#ifndef __ASM_MACH_APIC_H
-#define __ASM_MACH_APIC_H
-
-#define xapic_phys_to_log_apicid(cpu) (per_cpu(x86_bios_cpu_apicid, cpu))
-#define esr_disable (1)
-
-static inline int apic_id_registered(void)
-{
-	return (1);
-}
-
-/* Round robin the irqs amoung the online cpus */
-static inline cpumask_t target_cpus(void)
-{ 
-	static unsigned long cpu = NR_CPUS;
-	do {
-		if (cpu >= NR_CPUS)
-			cpu = first_cpu(cpu_online_map);
-		else
-			cpu = next_cpu(cpu, cpu_online_map);
-	} while (cpu >= NR_CPUS);
-	return cpumask_of_cpu(cpu);
-}
-
-#undef APIC_DEST_LOGICAL
-#define APIC_DEST_LOGICAL 	0
-#define TARGET_CPUS		(target_cpus())
-#define APIC_DFR_VALUE		(APIC_DFR_FLAT)
-#define INT_DELIVERY_MODE	(dest_Fixed)
-#define INT_DEST_MODE		(0)    /* phys delivery to target proc */
-#define NO_BALANCE_IRQ		(0)
-#define WAKE_SECONDARY_VIA_INIT
-
-
-static inline unsigned long check_apicid_used(physid_mask_t bitmap, int apicid)
-{
-	return (0);
-}
-
-static inline unsigned long check_apicid_present(int bit)
-{
-	return (1);
-}
-
-static inline unsigned long calculate_ldr(int cpu)
-{
-	unsigned long val, id;
-	val = apic_read(APIC_LDR) & ~APIC_LDR_MASK;
-	id = xapic_phys_to_log_apicid(cpu);
-	val |= SET_APIC_LOGICAL_ID(id);
-	return val;
-}
-
-/*
- * Set up the logical destination ID.
- *
- * Intel recommends to set DFR, LDR and TPR before enabling
- * an APIC.  See e.g. "AP-388 82489DX User's Manual" (Intel
- * document number 292116).  So here it goes...
- */
-static inline void init_apic_ldr(void)
-{
-	unsigned long val;
-	int cpu = smp_processor_id();
-
-	apic_write(APIC_DFR, APIC_DFR_VALUE);
-	val = calculate_ldr(cpu);
-	apic_write(APIC_LDR, val);
-}
-
-static inline void setup_apic_routing(void)
-{
-	printk("Enabling APIC mode:  %s.  Using %d I/O APICs\n",
-		"Physflat", nr_ioapics);
-}
-
-static inline int multi_timer_check(int apic, int irq)
-{
-	return (0);
-}
-
-static inline int apicid_to_node(int logical_apicid)
-{
-	return apicid_2_node[hard_smp_processor_id()];
-}
-
-static inline int cpu_present_to_apicid(int mps_cpu)
-{
-	if (mps_cpu < NR_CPUS)
-		return (int) per_cpu(x86_bios_cpu_apicid, mps_cpu);
-
-	return BAD_APICID;
-}
-
-static inline physid_mask_t apicid_to_cpu_present(int phys_apicid)
-{
-	return physid_mask_of_physid(phys_apicid);
-}
-
-extern u8 cpu_2_logical_apicid[];
-/* Mapping from cpu number to logical apicid */
-static inline int cpu_to_logical_apicid(int cpu)
-{
-	if (cpu >= NR_CPUS)
-		return BAD_APICID;
-	return cpu_physical_id(cpu);
-}
-
-static inline physid_mask_t ioapic_phys_id_map(physid_mask_t phys_map)
-{
-	/* For clustered we don't have a good way to do this yet - hack */
-	return physids_promote(0xFFL);
-}
-
-static inline void setup_portio_remap(void)
-{
-}
-
-static inline void enable_apic_mode(void)
-{
-}
-
-static inline int check_phys_apicid_present(int boot_cpu_physical_apicid)
-{
-	return (1);
-}
-
-/* As we are using single CPU as destination, pick only one CPU here */
-static inline unsigned int cpu_mask_to_apicid(cpumask_t cpumask)
-{
-	int cpu;
-	int apicid;	
-
-	cpu = first_cpu(cpumask);
-	apicid = cpu_to_logical_apicid(cpu);
-	return apicid;
-}
-
-static inline u32 phys_pkg_id(u32 cpuid_apic, int index_msb)
-{
-	return cpuid_apic >> index_msb;
-}
-
-#endif /* __ASM_MACH_APIC_H */
diff --git a/include/asm-x86/mach-bigsmp/mach_apicdef.h b/include/asm-x86/mach-bigsmp/mach_apicdef.h
deleted file mode 100644
index a58ab5a75c8c..000000000000
--- a/include/asm-x86/mach-bigsmp/mach_apicdef.h
+++ /dev/null
@@ -1,13 +0,0 @@
-#ifndef __ASM_MACH_APICDEF_H
-#define __ASM_MACH_APICDEF_H
-
-#define		APIC_ID_MASK		(0xFF<<24)
-
-static inline unsigned get_apic_id(unsigned long x) 
-{ 
-	return (((x)>>24)&0xFF);
-} 
-
-#define		GET_APIC_ID(x)	get_apic_id(x)
-
-#endif
diff --git a/include/asm-x86/mach-default/apm.h b/include/asm-x86/mach-default/apm.h
index 989f34c37d32..2aa61b54fbd5 100644
--- a/include/asm-x86/mach-default/apm.h
+++ b/include/asm-x86/mach-default/apm.h
@@ -3,8 +3,8 @@
  *  Split out from apm.c by Osamu Tomita <tomita@cinet.co.jp>
  */
 
-#ifndef _ASM_APM_H
-#define _ASM_APM_H
+#ifndef ASM_X86__MACH_DEFAULT__APM_H
+#define ASM_X86__MACH_DEFAULT__APM_H
 
 #ifdef APM_ZERO_SEGS
 #	define APM_DO_ZERO_SEGS \
@@ -70,4 +70,4 @@ static inline u8 apm_bios_call_simple_asm(u32 func, u32 ebx_in,
 	return error;
 }
 
-#endif /* _ASM_APM_H */
+#endif /* ASM_X86__MACH_DEFAULT__APM_H */
diff --git a/include/asm-x86/mach-default/mach_apic.h b/include/asm-x86/mach-default/mach_apic.h
index f3226b9a6b82..2a330a41b3dd 100644
--- a/include/asm-x86/mach-default/mach_apic.h
+++ b/include/asm-x86/mach-default/mach_apic.h
@@ -1,5 +1,5 @@
-#ifndef __ASM_MACH_APIC_H
-#define __ASM_MACH_APIC_H
+#ifndef ASM_X86__MACH_DEFAULT__MACH_APIC_H
+#define ASM_X86__MACH_DEFAULT__MACH_APIC_H
 
 #ifdef CONFIG_X86_LOCAL_APIC
 
@@ -30,6 +30,8 @@ static inline cpumask_t target_cpus(void)
 #define cpu_mask_to_apicid (genapic->cpu_mask_to_apicid)
 #define phys_pkg_id	(genapic->phys_pkg_id)
 #define vector_allocation_domain    (genapic->vector_allocation_domain)
+#define read_apic_id()  (GET_APIC_ID(apic_read(APIC_ID)))
+#define send_IPI_self (genapic->send_IPI_self)
 extern void setup_apic_routing(void);
 #else
 #define INT_DELIVERY_MODE dest_LowestPrio
@@ -54,7 +56,7 @@ static inline void init_apic_ldr(void)
 
 static inline int apic_id_registered(void)
 {
-	return physid_isset(GET_APIC_ID(read_apic_id()), phys_cpu_present_map);
+	return physid_isset(read_apic_id(), phys_cpu_present_map);
 }
 
 static inline unsigned int cpu_mask_to_apicid(cpumask_t cpumask)
@@ -138,4 +140,4 @@ static inline void enable_apic_mode(void)
 }
 
 #endif /* CONFIG_X86_LOCAL_APIC */
-#endif /* __ASM_MACH_APIC_H */
+#endif /* ASM_X86__MACH_DEFAULT__MACH_APIC_H */
diff --git a/include/asm-x86/mach-default/mach_apicdef.h b/include/asm-x86/mach-default/mach_apicdef.h
index e4b29ba37de6..0c2d41c41b20 100644
--- a/include/asm-x86/mach-default/mach_apicdef.h
+++ b/include/asm-x86/mach-default/mach_apicdef.h
@@ -1,12 +1,12 @@
-#ifndef __ASM_MACH_APICDEF_H
-#define __ASM_MACH_APICDEF_H
+#ifndef ASM_X86__MACH_DEFAULT__MACH_APICDEF_H
+#define ASM_X86__MACH_DEFAULT__MACH_APICDEF_H
 
 #include <asm/apic.h>
 
 #ifdef CONFIG_X86_64
-#define	APIC_ID_MASK		(0xFFu<<24)
-#define GET_APIC_ID(x)          (((x)>>24)&0xFFu)
-#define	SET_APIC_ID(x)		(((x)<<24))
+#define	APIC_ID_MASK		(genapic->apic_id_mask)
+#define GET_APIC_ID(x)		(genapic->get_apic_id(x))
+#define	SET_APIC_ID(x)		(genapic->set_apic_id(x))
 #else
 #define		APIC_ID_MASK		(0xF<<24)
 static inline unsigned get_apic_id(unsigned long x) 
@@ -21,4 +21,4 @@ static inline unsigned get_apic_id(unsigned long x)
 #define		GET_APIC_ID(x)	get_apic_id(x)
 #endif
 
-#endif
+#endif /* ASM_X86__MACH_DEFAULT__MACH_APICDEF_H */
diff --git a/include/asm-x86/mach-default/mach_ipi.h b/include/asm-x86/mach-default/mach_ipi.h
index be323364e68f..674bc7e50c35 100644
--- a/include/asm-x86/mach-default/mach_ipi.h
+++ b/include/asm-x86/mach-default/mach_ipi.h
@@ -1,5 +1,5 @@
-#ifndef __ASM_MACH_IPI_H
-#define __ASM_MACH_IPI_H
+#ifndef ASM_X86__MACH_DEFAULT__MACH_IPI_H
+#define ASM_X86__MACH_DEFAULT__MACH_IPI_H
 
 /* Avoid include hell */
 #define NMI_VECTOR 0x02
@@ -61,4 +61,4 @@ static inline void send_IPI_all(int vector)
 }
 #endif
 
-#endif /* __ASM_MACH_IPI_H */
+#endif /* ASM_X86__MACH_DEFAULT__MACH_IPI_H */
diff --git a/include/asm-x86/mach-default/mach_mpparse.h b/include/asm-x86/mach-default/mach_mpparse.h
index d14108505bb8..9c381f2815ac 100644
--- a/include/asm-x86/mach-default/mach_mpparse.h
+++ b/include/asm-x86/mach-default/mach_mpparse.h
@@ -1,5 +1,5 @@
-#ifndef __ASM_MACH_MPPARSE_H
-#define __ASM_MACH_MPPARSE_H
+#ifndef ASM_X86__MACH_DEFAULT__MACH_MPPARSE_H
+#define ASM_X86__MACH_DEFAULT__MACH_MPPARSE_H
 
 static inline int mps_oem_check(struct mp_config_table *mpc, char *oem, 
 		char *productid)
@@ -14,4 +14,4 @@ static inline int acpi_madt_oem_check(char *oem_id, char *oem_table_id)
 }
 
 
-#endif /* __ASM_MACH_MPPARSE_H */
+#endif /* ASM_X86__MACH_DEFAULT__MACH_MPPARSE_H */
diff --git a/include/asm-x86/mach-default/mach_mpspec.h b/include/asm-x86/mach-default/mach_mpspec.h
index 51c9a9775932..d77646f011f1 100644
--- a/include/asm-x86/mach-default/mach_mpspec.h
+++ b/include/asm-x86/mach-default/mach_mpspec.h
@@ -1,5 +1,5 @@
-#ifndef __ASM_MACH_MPSPEC_H
-#define __ASM_MACH_MPSPEC_H
+#ifndef ASM_X86__MACH_DEFAULT__MACH_MPSPEC_H
+#define ASM_X86__MACH_DEFAULT__MACH_MPSPEC_H
 
 #define MAX_IRQ_SOURCES 256
 
@@ -9,4 +9,4 @@
 #define MAX_MP_BUSSES 32
 #endif
 
-#endif /* __ASM_MACH_MPSPEC_H */
+#endif /* ASM_X86__MACH_DEFAULT__MACH_MPSPEC_H */
diff --git a/include/asm-x86/mach-default/mach_timer.h b/include/asm-x86/mach-default/mach_timer.h
index 4b76e536cd98..990b15833834 100644
--- a/include/asm-x86/mach-default/mach_timer.h
+++ b/include/asm-x86/mach-default/mach_timer.h
@@ -10,8 +10,8 @@
  * directly because of the awkward 8-bit access mechanism of the 82C54
  * device.
  */
-#ifndef _MACH_TIMER_H
-#define _MACH_TIMER_H
+#ifndef ASM_X86__MACH_DEFAULT__MACH_TIMER_H
+#define ASM_X86__MACH_DEFAULT__MACH_TIMER_H
 
 #define CALIBRATE_TIME_MSEC 30 /* 30 msecs */
 #define CALIBRATE_LATCH	\
@@ -45,4 +45,4 @@ static inline void mach_countup(unsigned long *count_p)
 	*count_p = count;
 }
 
-#endif /* !_MACH_TIMER_H */
+#endif /* ASM_X86__MACH_DEFAULT__MACH_TIMER_H */
diff --git a/include/asm-x86/mach-default/mach_traps.h b/include/asm-x86/mach-default/mach_traps.h
index 2fe7705c0484..de9ac3f5c4ce 100644
--- a/include/asm-x86/mach-default/mach_traps.h
+++ b/include/asm-x86/mach-default/mach_traps.h
@@ -2,8 +2,8 @@
  *  Machine specific NMI handling for generic.
  *  Split out from traps.c by Osamu Tomita <tomita@cinet.co.jp>
  */
-#ifndef _MACH_TRAPS_H
-#define _MACH_TRAPS_H
+#ifndef ASM_X86__MACH_DEFAULT__MACH_TRAPS_H
+#define ASM_X86__MACH_DEFAULT__MACH_TRAPS_H
 
 #include <asm/mc146818rtc.h>
 
@@ -36,4 +36,4 @@ static inline void reassert_nmi(void)
 		unlock_cmos();
 }
 
-#endif /* !_MACH_TRAPS_H */
+#endif /* ASM_X86__MACH_DEFAULT__MACH_TRAPS_H */
diff --git a/include/asm-x86/mach-default/mach_wakecpu.h b/include/asm-x86/mach-default/mach_wakecpu.h
index 3ebb17893aa5..361b810f5160 100644
--- a/include/asm-x86/mach-default/mach_wakecpu.h
+++ b/include/asm-x86/mach-default/mach_wakecpu.h
@@ -1,5 +1,5 @@
-#ifndef __ASM_MACH_WAKECPU_H
-#define __ASM_MACH_WAKECPU_H
+#ifndef ASM_X86__MACH_DEFAULT__MACH_WAKECPU_H
+#define ASM_X86__MACH_DEFAULT__MACH_WAKECPU_H
 
 /* 
  * This file copes with machines that wakeup secondary CPUs by the
@@ -39,4 +39,4 @@ static inline void restore_NMI_vector(unsigned short *high, unsigned short *low)
  #define inquire_remote_apic(apicid) {}
 #endif
 
-#endif /* __ASM_MACH_WAKECPU_H */
+#endif /* ASM_X86__MACH_DEFAULT__MACH_WAKECPU_H */
diff --git a/include/asm-x86/mach-es7000/mach_apic.h b/include/asm-x86/mach-es7000/mach_apic.h
deleted file mode 100644
index 0a3fdf930672..000000000000
--- a/include/asm-x86/mach-es7000/mach_apic.h
+++ /dev/null
@@ -1,194 +0,0 @@
-#ifndef __ASM_MACH_APIC_H
-#define __ASM_MACH_APIC_H
-
-#define xapic_phys_to_log_apicid(cpu) per_cpu(x86_bios_cpu_apicid, cpu)
-#define esr_disable (1)
-
-static inline int apic_id_registered(void)
-{
-	        return (1);
-}
-
-static inline cpumask_t target_cpus(void)
-{ 
-#if defined CONFIG_ES7000_CLUSTERED_APIC
-	return CPU_MASK_ALL;
-#else
-	return cpumask_of_cpu(smp_processor_id());
-#endif
-}
-#define TARGET_CPUS	(target_cpus())
-
-#if defined CONFIG_ES7000_CLUSTERED_APIC
-#define APIC_DFR_VALUE		(APIC_DFR_CLUSTER)
-#define INT_DELIVERY_MODE	(dest_LowestPrio)
-#define INT_DEST_MODE		(1)    /* logical delivery broadcast to all procs */
-#define NO_BALANCE_IRQ 		(1)
-#undef  WAKE_SECONDARY_VIA_INIT
-#define WAKE_SECONDARY_VIA_MIP
-#else
-#define APIC_DFR_VALUE		(APIC_DFR_FLAT)
-#define INT_DELIVERY_MODE	(dest_Fixed)
-#define INT_DEST_MODE		(0)    /* phys delivery to target procs */
-#define NO_BALANCE_IRQ 		(0)
-#undef  APIC_DEST_LOGICAL
-#define APIC_DEST_LOGICAL	0x0
-#define WAKE_SECONDARY_VIA_INIT
-#endif
-
-static inline unsigned long check_apicid_used(physid_mask_t bitmap, int apicid)
-{ 
-	return 0;
-} 
-static inline unsigned long check_apicid_present(int bit) 
-{
-	return physid_isset(bit, phys_cpu_present_map);
-}
-
-#define apicid_cluster(apicid) (apicid & 0xF0)
-
-static inline unsigned long calculate_ldr(int cpu)
-{
-	unsigned long id;
-	id = xapic_phys_to_log_apicid(cpu);
-	return (SET_APIC_LOGICAL_ID(id));
-}
-
-/*
- * Set up the logical destination ID.
- *
- * Intel recommends to set DFR, LdR and TPR before enabling
- * an APIC.  See e.g. "AP-388 82489DX User's Manual" (Intel
- * document number 292116).  So here it goes...
- */
-static inline void init_apic_ldr(void)
-{
-	unsigned long val;
-	int cpu = smp_processor_id();
-
-	apic_write(APIC_DFR, APIC_DFR_VALUE);
-	val = calculate_ldr(cpu);
-	apic_write(APIC_LDR, val);
-}
-
-#ifndef CONFIG_X86_GENERICARCH
-extern void enable_apic_mode(void);
-#endif
-
-extern int apic_version [MAX_APICS];
-static inline void setup_apic_routing(void)
-{
-	int apic = per_cpu(x86_bios_cpu_apicid, smp_processor_id());
-	printk("Enabling APIC mode:  %s.  Using %d I/O APICs, target cpus %lx\n",
-		(apic_version[apic] == 0x14) ? 
-		"Physical Cluster" : "Logical Cluster", nr_ioapics, cpus_addr(TARGET_CPUS)[0]);
-}
-
-static inline int multi_timer_check(int apic, int irq)
-{
-	return 0;
-}
-
-static inline int apicid_to_node(int logical_apicid)
-{
-	return 0;
-}
-
-
-static inline int cpu_present_to_apicid(int mps_cpu)
-{
-	if (!mps_cpu)
-		return boot_cpu_physical_apicid;
-	else if (mps_cpu < NR_CPUS)
-		return (int) per_cpu(x86_bios_cpu_apicid, mps_cpu);
-	else
-		return BAD_APICID;
-}
-
-static inline physid_mask_t apicid_to_cpu_present(int phys_apicid)
-{
-	static int id = 0;
-	physid_mask_t mask;
-	mask = physid_mask_of_physid(id);
-	++id;
-	return mask;
-}
-
-extern u8 cpu_2_logical_apicid[];
-/* Mapping from cpu number to logical apicid */
-static inline int cpu_to_logical_apicid(int cpu)
-{
-#ifdef CONFIG_SMP
-       if (cpu >= NR_CPUS)
-	       return BAD_APICID;
-       return (int)cpu_2_logical_apicid[cpu];
-#else
-	return logical_smp_processor_id();
-#endif
-}
-
-static inline physid_mask_t ioapic_phys_id_map(physid_mask_t phys_map)
-{
-	/* For clustered we don't have a good way to do this yet - hack */
-	return physids_promote(0xff);
-}
-
-
-static inline void setup_portio_remap(void)
-{
-}
-
-extern unsigned int boot_cpu_physical_apicid;
-static inline int check_phys_apicid_present(int cpu_physical_apicid)
-{
-	boot_cpu_physical_apicid = GET_APIC_ID(read_apic_id());
-	return (1);
-}
-
-static inline unsigned int cpu_mask_to_apicid(cpumask_t cpumask)
-{
-	int num_bits_set;
-	int cpus_found = 0;
-	int cpu;
-	int apicid;	
-
-	num_bits_set = cpus_weight(cpumask);
-	/* Return id to all */
-	if (num_bits_set == NR_CPUS)
-#if defined CONFIG_ES7000_CLUSTERED_APIC
-		return 0xFF;
-#else
-		return cpu_to_logical_apicid(0);
-#endif
-	/* 
-	 * The cpus in the mask must all be on the apic cluster.  If are not 
-	 * on the same apicid cluster return default value of TARGET_CPUS. 
-	 */
-	cpu = first_cpu(cpumask);
-	apicid = cpu_to_logical_apicid(cpu);
-	while (cpus_found < num_bits_set) {
-		if (cpu_isset(cpu, cpumask)) {
-			int new_apicid = cpu_to_logical_apicid(cpu);
-			if (apicid_cluster(apicid) != 
-					apicid_cluster(new_apicid)){
-				printk ("%s: Not a valid mask!\n",__FUNCTION__);
-#if defined CONFIG_ES7000_CLUSTERED_APIC
-				return 0xFF;
-#else
-				return cpu_to_logical_apicid(0);
-#endif
-			}
-			apicid = new_apicid;
-			cpus_found++;
-		}
-		cpu++;
-	}
-	return apicid;
-}
-
-static inline u32 phys_pkg_id(u32 cpuid_apic, int index_msb)
-{
-	return cpuid_apic >> index_msb;
-}
-
-#endif /* __ASM_MACH_APIC_H */
diff --git a/include/asm-x86/mach-es7000/mach_apicdef.h b/include/asm-x86/mach-es7000/mach_apicdef.h
deleted file mode 100644
index a58ab5a75c8c..000000000000
--- a/include/asm-x86/mach-es7000/mach_apicdef.h
+++ /dev/null
@@ -1,13 +0,0 @@
-#ifndef __ASM_MACH_APICDEF_H
-#define __ASM_MACH_APICDEF_H
-
-#define		APIC_ID_MASK		(0xFF<<24)
-
-static inline unsigned get_apic_id(unsigned long x) 
-{ 
-	return (((x)>>24)&0xFF);
-} 
-
-#define		GET_APIC_ID(x)	get_apic_id(x)
-
-#endif
diff --git a/include/asm-x86/mach-es7000/mach_ipi.h b/include/asm-x86/mach-es7000/mach_ipi.h
deleted file mode 100644
index 5e61bd220b06..000000000000
--- a/include/asm-x86/mach-es7000/mach_ipi.h
+++ /dev/null
@@ -1,24 +0,0 @@
-#ifndef __ASM_MACH_IPI_H
-#define __ASM_MACH_IPI_H
-
-void send_IPI_mask_sequence(cpumask_t mask, int vector);
-
-static inline void send_IPI_mask(cpumask_t mask, int vector)
-{
-	send_IPI_mask_sequence(mask, vector);
-}
-
-static inline void send_IPI_allbutself(int vector)
-{
-	cpumask_t mask = cpu_online_map;
-	cpu_clear(smp_processor_id(), mask);
-	if (!cpus_empty(mask))
-		send_IPI_mask(mask, vector);
-}
-
-static inline void send_IPI_all(int vector)
-{
-	send_IPI_mask(cpu_online_map, vector);
-}
-
-#endif /* __ASM_MACH_IPI_H */
diff --git a/include/asm-x86/mach-es7000/mach_mpparse.h b/include/asm-x86/mach-es7000/mach_mpparse.h
deleted file mode 100644
index ef26d3523625..000000000000
--- a/include/asm-x86/mach-es7000/mach_mpparse.h
+++ /dev/null
@@ -1,29 +0,0 @@
-#ifndef __ASM_MACH_MPPARSE_H
-#define __ASM_MACH_MPPARSE_H
-
-#include <linux/acpi.h>
-
-extern int parse_unisys_oem (char *oemptr);
-extern int find_unisys_acpi_oem_table(unsigned long *oem_addr);
-extern void setup_unisys(void);
-
-#ifndef CONFIG_X86_GENERICARCH
-extern int acpi_madt_oem_check(char *oem_id, char *oem_table_id);
-extern int mps_oem_check(struct mp_config_table *mpc, char *oem,
-				char *productid);
-#endif
-
-#ifdef CONFIG_ACPI
-
-static inline int es7000_check_dsdt(void)
-{
-	struct acpi_table_header header;
-
-	if (ACPI_SUCCESS(acpi_get_table_header(ACPI_SIG_DSDT, 0, &header)) &&
-	    !strncmp(header.oem_id, "UNISYS", 6))
-		return 1;
-	return 0;
-}
-#endif
-
-#endif /* __ASM_MACH_MPPARSE_H */
diff --git a/include/asm-x86/mach-es7000/mach_wakecpu.h b/include/asm-x86/mach-es7000/mach_wakecpu.h
deleted file mode 100644
index 84ff58314501..000000000000
--- a/include/asm-x86/mach-es7000/mach_wakecpu.h
+++ /dev/null
@@ -1,59 +0,0 @@
-#ifndef __ASM_MACH_WAKECPU_H
-#define __ASM_MACH_WAKECPU_H
-
-/* 
- * This file copes with machines that wakeup secondary CPUs by the
- * INIT, INIT, STARTUP sequence.
- */
-
-#ifdef CONFIG_ES7000_CLUSTERED_APIC
-#define WAKE_SECONDARY_VIA_MIP
-#else
-#define WAKE_SECONDARY_VIA_INIT
-#endif
-
-#ifdef WAKE_SECONDARY_VIA_MIP
-extern int es7000_start_cpu(int cpu, unsigned long eip);
-static inline int
-wakeup_secondary_cpu(int phys_apicid, unsigned long start_eip)
-{
-	int boot_error = 0;
-	boot_error = es7000_start_cpu(phys_apicid, start_eip);
-	return boot_error;
-}
-#endif
-
-#define TRAMPOLINE_LOW phys_to_virt(0x467)
-#define TRAMPOLINE_HIGH phys_to_virt(0x469)
-
-#define boot_cpu_apicid boot_cpu_physical_apicid
-
-static inline void wait_for_init_deassert(atomic_t *deassert)
-{
-#ifdef WAKE_SECONDARY_VIA_INIT
-	while (!atomic_read(deassert))
-		cpu_relax();
-#endif
-	return;
-}
-
-/* Nothing to do for most platforms, since cleared by the INIT cycle */
-static inline void smp_callin_clear_local_apic(void)
-{
-}
-
-static inline void store_NMI_vector(unsigned short *high, unsigned short *low)
-{
-}
-
-static inline void restore_NMI_vector(unsigned short *high, unsigned short *low)
-{
-}
-
-#if APIC_DEBUG
- #define inquire_remote_apic(apicid) __inquire_remote_apic(apicid)
-#else
- #define inquire_remote_apic(apicid) {}
-#endif
-
-#endif /* __ASM_MACH_WAKECPU_H */
diff --git a/include/asm-x86/mach-generic/gpio.h b/include/asm-x86/mach-generic/gpio.h
index 5305dcb96df2..6ce0f7786ef8 100644
--- a/include/asm-x86/mach-generic/gpio.h
+++ b/include/asm-x86/mach-generic/gpio.h
@@ -1,5 +1,5 @@
-#ifndef __ASM_MACH_GENERIC_GPIO_H
-#define __ASM_MACH_GENERIC_GPIO_H
+#ifndef ASM_X86__MACH_GENERIC__GPIO_H
+#define ASM_X86__MACH_GENERIC__GPIO_H
 
 int gpio_request(unsigned gpio, const char *label);
 void gpio_free(unsigned gpio);
@@ -12,4 +12,4 @@ int irq_to_gpio(unsigned irq);
 
 #include <asm-generic/gpio.h>           /* cansleep wrappers */
 
-#endif /* __ASM_MACH_GENERIC_GPIO_H */
+#endif /* ASM_X86__MACH_GENERIC__GPIO_H */
diff --git a/include/asm-x86/mach-generic/irq_vectors_limits.h b/include/asm-x86/mach-generic/irq_vectors_limits.h
index 890ce3f5e09a..f7870e1a220d 100644
--- a/include/asm-x86/mach-generic/irq_vectors_limits.h
+++ b/include/asm-x86/mach-generic/irq_vectors_limits.h
@@ -1,5 +1,5 @@
-#ifndef _ASM_IRQ_VECTORS_LIMITS_H
-#define _ASM_IRQ_VECTORS_LIMITS_H
+#ifndef ASM_X86__MACH_GENERIC__IRQ_VECTORS_LIMITS_H
+#define ASM_X86__MACH_GENERIC__IRQ_VECTORS_LIMITS_H
 
 /*
  * For Summit or generic (i.e. installer) kernels, we have lots of I/O APICs,
@@ -11,4 +11,4 @@
 #define NR_IRQS	224
 #define NR_IRQ_VECTORS	1024
 
-#endif /* _ASM_IRQ_VECTORS_LIMITS_H */
+#endif /* ASM_X86__MACH_GENERIC__IRQ_VECTORS_LIMITS_H */
diff --git a/include/asm-x86/mach-generic/mach_apic.h b/include/asm-x86/mach-generic/mach_apic.h
index 6eff343e1233..5d010c6881dd 100644
--- a/include/asm-x86/mach-generic/mach_apic.h
+++ b/include/asm-x86/mach-generic/mach_apic.h
@@ -1,5 +1,5 @@
-#ifndef __ASM_MACH_APIC_H
-#define __ASM_MACH_APIC_H
+#ifndef ASM_X86__MACH_GENERIC__MACH_APIC_H
+#define ASM_X86__MACH_GENERIC__MACH_APIC_H
 
 #include <asm/genapic.h>
 
@@ -29,4 +29,4 @@
 
 extern void generic_bigsmp_probe(void);
 
-#endif /* __ASM_MACH_APIC_H */
+#endif /* ASM_X86__MACH_GENERIC__MACH_APIC_H */
diff --git a/include/asm-x86/mach-generic/mach_apicdef.h b/include/asm-x86/mach-generic/mach_apicdef.h
index 28ed98972ca8..1657f38b8f27 100644
--- a/include/asm-x86/mach-generic/mach_apicdef.h
+++ b/include/asm-x86/mach-generic/mach_apicdef.h
@@ -1,5 +1,5 @@
-#ifndef _GENAPIC_MACH_APICDEF_H
-#define _GENAPIC_MACH_APICDEF_H 1
+#ifndef ASM_X86__MACH_GENERIC__MACH_APICDEF_H
+#define ASM_X86__MACH_GENERIC__MACH_APICDEF_H
 
 #ifndef APIC_DEFINITION
 #include <asm/genapic.h>
@@ -8,4 +8,4 @@
 #define APIC_ID_MASK (genapic->apic_id_mask)
 #endif
 
-#endif
+#endif /* ASM_X86__MACH_GENERIC__MACH_APICDEF_H */
diff --git a/include/asm-x86/mach-generic/mach_ipi.h b/include/asm-x86/mach-generic/mach_ipi.h
index 441b0fe3ed1d..f67433dbd65f 100644
--- a/include/asm-x86/mach-generic/mach_ipi.h
+++ b/include/asm-x86/mach-generic/mach_ipi.h
@@ -1,5 +1,5 @@
-#ifndef _MACH_IPI_H
-#define _MACH_IPI_H 1
+#ifndef ASM_X86__MACH_GENERIC__MACH_IPI_H
+#define ASM_X86__MACH_GENERIC__MACH_IPI_H
 
 #include <asm/genapic.h>
 
@@ -7,4 +7,4 @@
 #define send_IPI_allbutself (genapic->send_IPI_allbutself)
 #define send_IPI_all (genapic->send_IPI_all)
 
-#endif
+#endif /* ASM_X86__MACH_GENERIC__MACH_IPI_H */
diff --git a/include/asm-x86/mach-generic/mach_mpparse.h b/include/asm-x86/mach-generic/mach_mpparse.h
index 586cadbf3787..3115564e557c 100644
--- a/include/asm-x86/mach-generic/mach_mpparse.h
+++ b/include/asm-x86/mach-generic/mach_mpparse.h
@@ -1,5 +1,5 @@
-#ifndef _MACH_MPPARSE_H
-#define _MACH_MPPARSE_H 1
+#ifndef ASM_X86__MACH_GENERIC__MACH_MPPARSE_H
+#define ASM_X86__MACH_GENERIC__MACH_MPPARSE_H
 
 
 extern int mps_oem_check(struct mp_config_table *mpc, char *oem,
@@ -7,4 +7,4 @@ extern int mps_oem_check(struct mp_config_table *mpc, char *oem,
 
 extern int acpi_madt_oem_check(char *oem_id, char *oem_table_id);
 
-#endif
+#endif /* ASM_X86__MACH_GENERIC__MACH_MPPARSE_H */
diff --git a/include/asm-x86/mach-generic/mach_mpspec.h b/include/asm-x86/mach-generic/mach_mpspec.h
index c83c120be538..6061b153613e 100644
--- a/include/asm-x86/mach-generic/mach_mpspec.h
+++ b/include/asm-x86/mach-generic/mach_mpspec.h
@@ -1,5 +1,5 @@
-#ifndef __ASM_MACH_MPSPEC_H
-#define __ASM_MACH_MPSPEC_H
+#ifndef ASM_X86__MACH_GENERIC__MACH_MPSPEC_H
+#define ASM_X86__MACH_GENERIC__MACH_MPSPEC_H
 
 #define MAX_IRQ_SOURCES 256
 
@@ -9,4 +9,4 @@
 
 extern void numaq_mps_oem_check(struct mp_config_table *mpc, char *oem,
 				char *productid);
-#endif /* __ASM_MACH_MPSPEC_H */
+#endif /* ASM_X86__MACH_GENERIC__MACH_MPSPEC_H */
diff --git a/include/asm-x86/mach-numaq/mach_apic.h b/include/asm-x86/mach-numaq/mach_apic.h
deleted file mode 100644
index d802465e026a..000000000000
--- a/include/asm-x86/mach-numaq/mach_apic.h
+++ /dev/null
@@ -1,138 +0,0 @@
-#ifndef __ASM_MACH_APIC_H
-#define __ASM_MACH_APIC_H
-
-#include <asm/io.h>
-#include <linux/mmzone.h>
-#include <linux/nodemask.h>
-
-#define APIC_DFR_VALUE	(APIC_DFR_CLUSTER)
-
-static inline cpumask_t target_cpus(void)
-{
-	return CPU_MASK_ALL;
-}
-
-#define TARGET_CPUS (target_cpus())
-
-#define NO_BALANCE_IRQ (1)
-#define esr_disable (1)
-
-#define INT_DELIVERY_MODE dest_LowestPrio
-#define INT_DEST_MODE 0     /* physical delivery on LOCAL quad */
- 
-static inline unsigned long check_apicid_used(physid_mask_t bitmap, int apicid)
-{
-	return physid_isset(apicid, bitmap);
-}
-static inline unsigned long check_apicid_present(int bit)
-{
-	return physid_isset(bit, phys_cpu_present_map);
-}
-#define apicid_cluster(apicid) (apicid & 0xF0)
-
-static inline int apic_id_registered(void)
-{
-	return 1;
-}
-
-static inline void init_apic_ldr(void)
-{
-	/* Already done in NUMA-Q firmware */
-}
-
-static inline void setup_apic_routing(void)
-{
-	printk("Enabling APIC mode:  %s.  Using %d I/O APICs\n",
-		"NUMA-Q", nr_ioapics);
-}
-
-/*
- * Skip adding the timer int on secondary nodes, which causes
- * a small but painful rift in the time-space continuum.
- */
-static inline int multi_timer_check(int apic, int irq)
-{
-	return apic != 0 && irq == 0;
-}
-
-static inline physid_mask_t ioapic_phys_id_map(physid_mask_t phys_map)
-{
-	/* We don't have a good way to do this yet - hack */
-	return physids_promote(0xFUL);
-}
-
-/* Mapping from cpu number to logical apicid */
-extern u8 cpu_2_logical_apicid[];
-static inline int cpu_to_logical_apicid(int cpu)
-{
-       if (cpu >= NR_CPUS)
-	       return BAD_APICID;
-	return (int)cpu_2_logical_apicid[cpu];
-}
-
-/*
- * Supporting over 60 cpus on NUMA-Q requires a locality-dependent
- * cpu to APIC ID relation to properly interact with the intelligent
- * mode of the cluster controller.
- */
-static inline int cpu_present_to_apicid(int mps_cpu)
-{
-	if (mps_cpu < 60)
-		return ((mps_cpu >> 2) << 4) | (1 << (mps_cpu & 0x3));
-	else
-		return BAD_APICID;
-}
-
-static inline int apicid_to_node(int logical_apicid) 
-{
-	return logical_apicid >> 4;
-}
-
-static inline physid_mask_t apicid_to_cpu_present(int logical_apicid)
-{
-	int node = apicid_to_node(logical_apicid);
-	int cpu = __ffs(logical_apicid & 0xf);
-
-	return physid_mask_of_physid(cpu + 4*node);
-}
-
-extern void *xquad_portio;
-
-static inline void setup_portio_remap(void)
-{
-	int num_quads = num_online_nodes();
-
-	if (num_quads <= 1)
-       		return;
-
-	printk("Remapping cross-quad port I/O for %d quads\n", num_quads);
-	xquad_portio = ioremap(XQUAD_PORTIO_BASE, num_quads*XQUAD_PORTIO_QUAD);
-	printk("xquad_portio vaddr 0x%08lx, len %08lx\n",
-		(u_long) xquad_portio, (u_long) num_quads*XQUAD_PORTIO_QUAD);
-}
-
-static inline int check_phys_apicid_present(int boot_cpu_physical_apicid)
-{
-	return (1);
-}
-
-static inline void enable_apic_mode(void)
-{
-}
-
-/*
- * We use physical apicids here, not logical, so just return the default
- * physical broadcast to stop people from breaking us
- */
-static inline unsigned int cpu_mask_to_apicid(cpumask_t cpumask)
-{
-	return (int) 0xF;
-}
-
-/* No NUMA-Q box has a HT CPU, but it can't hurt to use the default code. */
-static inline u32 phys_pkg_id(u32 cpuid_apic, int index_msb)
-{
-	return cpuid_apic >> index_msb;
-}
-
-#endif /* __ASM_MACH_APIC_H */
diff --git a/include/asm-x86/mach-numaq/mach_apicdef.h b/include/asm-x86/mach-numaq/mach_apicdef.h
deleted file mode 100644
index bf439d0690f5..000000000000
--- a/include/asm-x86/mach-numaq/mach_apicdef.h
+++ /dev/null
@@ -1,14 +0,0 @@
-#ifndef __ASM_MACH_APICDEF_H
-#define __ASM_MACH_APICDEF_H
-
-
-#define APIC_ID_MASK (0xF<<24)
-
-static inline unsigned get_apic_id(unsigned long x)
-{
-	        return (((x)>>24)&0x0F);
-}
-
-#define         GET_APIC_ID(x)  get_apic_id(x)
-
-#endif
diff --git a/include/asm-x86/mach-numaq/mach_ipi.h b/include/asm-x86/mach-numaq/mach_ipi.h
deleted file mode 100644
index c6044488e9e6..000000000000
--- a/include/asm-x86/mach-numaq/mach_ipi.h
+++ /dev/null
@@ -1,25 +0,0 @@
-#ifndef __ASM_MACH_IPI_H
-#define __ASM_MACH_IPI_H
-
-void send_IPI_mask_sequence(cpumask_t, int vector);
-
-static inline void send_IPI_mask(cpumask_t mask, int vector)
-{
-	send_IPI_mask_sequence(mask, vector);
-}
-
-static inline void send_IPI_allbutself(int vector)
-{
-	cpumask_t mask = cpu_online_map;
-	cpu_clear(smp_processor_id(), mask);
-
-	if (!cpus_empty(mask))
-		send_IPI_mask(mask, vector);
-}
-
-static inline void send_IPI_all(int vector)
-{
-	send_IPI_mask(cpu_online_map, vector);
-}
-
-#endif /* __ASM_MACH_IPI_H */
diff --git a/include/asm-x86/mach-numaq/mach_mpparse.h b/include/asm-x86/mach-numaq/mach_mpparse.h
deleted file mode 100644
index 626aef6b155f..000000000000
--- a/include/asm-x86/mach-numaq/mach_mpparse.h
+++ /dev/null
@@ -1,7 +0,0 @@
-#ifndef __ASM_MACH_MPPARSE_H
-#define __ASM_MACH_MPPARSE_H
-
-extern void numaq_mps_oem_check(struct mp_config_table *mpc, char *oem,
-				char *productid);
-
-#endif /* __ASM_MACH_MPPARSE_H */
diff --git a/include/asm-x86/mach-numaq/mach_wakecpu.h b/include/asm-x86/mach-numaq/mach_wakecpu.h
deleted file mode 100644
index 00530041a991..000000000000
--- a/include/asm-x86/mach-numaq/mach_wakecpu.h
+++ /dev/null
@@ -1,43 +0,0 @@
-#ifndef __ASM_MACH_WAKECPU_H
-#define __ASM_MACH_WAKECPU_H
-
-/* This file copes with machines that wakeup secondary CPUs by NMIs */
-
-#define WAKE_SECONDARY_VIA_NMI
-
-#define TRAMPOLINE_LOW phys_to_virt(0x8)
-#define TRAMPOLINE_HIGH phys_to_virt(0xa)
-
-#define boot_cpu_apicid boot_cpu_logical_apicid
-
-/* We don't do anything here because we use NMI's to boot instead */
-static inline void wait_for_init_deassert(atomic_t *deassert)
-{
-}
-
-/*
- * Because we use NMIs rather than the INIT-STARTUP sequence to
- * bootstrap the CPUs, the APIC may be in a weird state. Kick it.
- */
-static inline void smp_callin_clear_local_apic(void)
-{
-	clear_local_APIC();
-}
-
-static inline void store_NMI_vector(unsigned short *high, unsigned short *low)
-{
-	printk("Storing NMI vector\n");
-	*high = *((volatile unsigned short *) TRAMPOLINE_HIGH);
-	*low = *((volatile unsigned short *) TRAMPOLINE_LOW);
-}
-
-static inline void restore_NMI_vector(unsigned short *high, unsigned short *low)
-{
-	printk("Restoring NMI vector\n");
-	*((volatile unsigned short *) TRAMPOLINE_HIGH) = *high;
-	*((volatile unsigned short *) TRAMPOLINE_LOW) = *low;
-}
-
-#define inquire_remote_apic(apicid) {}
-
-#endif /* __ASM_MACH_WAKECPU_H */
diff --git a/include/asm-x86/mach-rdc321x/gpio.h b/include/asm-x86/mach-rdc321x/gpio.h
index acce0b7d397b..6184561980f2 100644
--- a/include/asm-x86/mach-rdc321x/gpio.h
+++ b/include/asm-x86/mach-rdc321x/gpio.h
@@ -1,5 +1,5 @@
-#ifndef _RDC321X_GPIO_H
-#define _RDC321X_GPIO_H
+#ifndef ASM_X86__MACH_RDC321X__GPIO_H
+#define ASM_X86__MACH_RDC321X__GPIO_H
 
 extern int rdc_gpio_get_value(unsigned gpio);
 extern void rdc_gpio_set_value(unsigned gpio, int value);
@@ -54,4 +54,4 @@ static inline int irq_to_gpio(unsigned irq)
 /* For cansleep */
 #include <asm-generic/gpio.h>
 
-#endif /* _RDC321X_GPIO_H_ */
+#endif /* ASM_X86__MACH_RDC321X__GPIO_H */
diff --git a/include/asm-x86/mach-summit/mach_apic.h b/include/asm-x86/mach-summit/mach_apic.h
deleted file mode 100644
index 75d2c95005d7..000000000000
--- a/include/asm-x86/mach-summit/mach_apic.h
+++ /dev/null
@@ -1,185 +0,0 @@
-#ifndef __ASM_MACH_APIC_H
-#define __ASM_MACH_APIC_H
-
-#include <asm/smp.h>
-
-#define esr_disable (1)
-#define NO_BALANCE_IRQ (0)
-
-/* In clustered mode, the high nibble of APIC ID is a cluster number.
- * The low nibble is a 4-bit bitmap. */
-#define XAPIC_DEST_CPUS_SHIFT	4
-#define XAPIC_DEST_CPUS_MASK	((1u << XAPIC_DEST_CPUS_SHIFT) - 1)
-#define XAPIC_DEST_CLUSTER_MASK	(XAPIC_DEST_CPUS_MASK << XAPIC_DEST_CPUS_SHIFT)
-
-#define APIC_DFR_VALUE	(APIC_DFR_CLUSTER)
-
-static inline cpumask_t target_cpus(void)
-{
-	/* CPU_MASK_ALL (0xff) has undefined behaviour with
-	 * dest_LowestPrio mode logical clustered apic interrupt routing
-	 * Just start on cpu 0.  IRQ balancing will spread load
-	 */
-	return cpumask_of_cpu(0);
-} 
-#define TARGET_CPUS	(target_cpus())
-
-#define INT_DELIVERY_MODE (dest_LowestPrio)
-#define INT_DEST_MODE 1     /* logical delivery broadcast to all procs */
-
-static inline unsigned long check_apicid_used(physid_mask_t bitmap, int apicid)
-{
-	return 0;
-} 
-
-/* we don't use the phys_cpu_present_map to indicate apicid presence */
-static inline unsigned long check_apicid_present(int bit) 
-{
-	return 1;
-}
-
-#define apicid_cluster(apicid) ((apicid) & XAPIC_DEST_CLUSTER_MASK)
-
-extern u8 cpu_2_logical_apicid[];
-
-static inline void init_apic_ldr(void)
-{
-	unsigned long val, id;
-	int count = 0;
-	u8 my_id = (u8)hard_smp_processor_id();
-	u8 my_cluster = (u8)apicid_cluster(my_id);
-#ifdef CONFIG_SMP
-	u8 lid;
-	int i;
-
-	/* Create logical APIC IDs by counting CPUs already in cluster. */
-	for (count = 0, i = NR_CPUS; --i >= 0; ) {
-		lid = cpu_2_logical_apicid[i];
-		if (lid != BAD_APICID && apicid_cluster(lid) == my_cluster)
-			++count;
-	}
-#endif
-	/* We only have a 4 wide bitmap in cluster mode.  If a deranged
-	 * BIOS puts 5 CPUs in one APIC cluster, we're hosed. */
-	BUG_ON(count >= XAPIC_DEST_CPUS_SHIFT);
-	id = my_cluster | (1UL << count);
-	apic_write(APIC_DFR, APIC_DFR_VALUE);
-	val = apic_read(APIC_LDR) & ~APIC_LDR_MASK;
-	val |= SET_APIC_LOGICAL_ID(id);
-	apic_write(APIC_LDR, val);
-}
-
-static inline int multi_timer_check(int apic, int irq)
-{
-	return 0;
-}
-
-static inline int apic_id_registered(void)
-{
-	return 1;
-}
-
-static inline void setup_apic_routing(void)
-{
-	printk("Enabling APIC mode:  Summit.  Using %d I/O APICs\n",
-						nr_ioapics);
-}
-
-static inline int apicid_to_node(int logical_apicid)
-{
-#ifdef CONFIG_SMP
-	return apicid_2_node[hard_smp_processor_id()];
-#else
-	return 0;
-#endif
-}
-
-/* Mapping from cpu number to logical apicid */
-static inline int cpu_to_logical_apicid(int cpu)
-{
-#ifdef CONFIG_SMP
-       if (cpu >= NR_CPUS)
-	       return BAD_APICID;
-	return (int)cpu_2_logical_apicid[cpu];
-#else
-	return logical_smp_processor_id();
-#endif
-}
-
-static inline int cpu_present_to_apicid(int mps_cpu)
-{
-	if (mps_cpu < NR_CPUS)
-		return (int)per_cpu(x86_bios_cpu_apicid, mps_cpu);
-	else
-		return BAD_APICID;
-}
-
-static inline physid_mask_t ioapic_phys_id_map(physid_mask_t phys_id_map)
-{
-	/* For clustered we don't have a good way to do this yet - hack */
-	return physids_promote(0x0F);
-}
-
-static inline physid_mask_t apicid_to_cpu_present(int apicid)
-{
-	return physid_mask_of_physid(0);
-}
-
-static inline void setup_portio_remap(void)
-{
-}
-
-static inline int check_phys_apicid_present(int boot_cpu_physical_apicid)
-{
-	return 1;
-}
-
-static inline void enable_apic_mode(void)
-{
-}
-
-static inline unsigned int cpu_mask_to_apicid(cpumask_t cpumask)
-{
-	int num_bits_set;
-	int cpus_found = 0;
-	int cpu;
-	int apicid;	
-
-	num_bits_set = cpus_weight(cpumask);
-	/* Return id to all */
-	if (num_bits_set == NR_CPUS)
-		return (int) 0xFF;
-	/* 
-	 * The cpus in the mask must all be on the apic cluster.  If are not 
-	 * on the same apicid cluster return default value of TARGET_CPUS. 
-	 */
-	cpu = first_cpu(cpumask);
-	apicid = cpu_to_logical_apicid(cpu);
-	while (cpus_found < num_bits_set) {
-		if (cpu_isset(cpu, cpumask)) {
-			int new_apicid = cpu_to_logical_apicid(cpu);
-			if (apicid_cluster(apicid) != 
-					apicid_cluster(new_apicid)){
-				printk ("%s: Not a valid mask!\n",__FUNCTION__);
-				return 0xFF;
-			}
-			apicid = apicid | new_apicid;
-			cpus_found++;
-		}
-		cpu++;
-	}
-	return apicid;
-}
-
-/* cpuid returns the value latched in the HW at reset, not the APIC ID
- * register's value.  For any box whose BIOS changes APIC IDs, like
- * clustered APIC systems, we must use hard_smp_processor_id.
- *
- * See Intel's IA-32 SW Dev's Manual Vol2 under CPUID.
- */
-static inline u32 phys_pkg_id(u32 cpuid_apic, int index_msb)
-{
-	return hard_smp_processor_id() >> index_msb;
-}
-
-#endif /* __ASM_MACH_APIC_H */
diff --git a/include/asm-x86/mach-summit/mach_apicdef.h b/include/asm-x86/mach-summit/mach_apicdef.h
deleted file mode 100644
index a58ab5a75c8c..000000000000
--- a/include/asm-x86/mach-summit/mach_apicdef.h
+++ /dev/null
@@ -1,13 +0,0 @@
-#ifndef __ASM_MACH_APICDEF_H
-#define __ASM_MACH_APICDEF_H
-
-#define		APIC_ID_MASK		(0xFF<<24)
-
-static inline unsigned get_apic_id(unsigned long x) 
-{ 
-	return (((x)>>24)&0xFF);
-} 
-
-#define		GET_APIC_ID(x)	get_apic_id(x)
-
-#endif
diff --git a/include/asm-x86/mach-summit/mach_ipi.h b/include/asm-x86/mach-summit/mach_ipi.h
deleted file mode 100644
index 9404c535b7ec..000000000000
--- a/include/asm-x86/mach-summit/mach_ipi.h
+++ /dev/null
@@ -1,25 +0,0 @@
-#ifndef __ASM_MACH_IPI_H
-#define __ASM_MACH_IPI_H
-
-void send_IPI_mask_sequence(cpumask_t mask, int vector);
-
-static inline void send_IPI_mask(cpumask_t mask, int vector)
-{
-	send_IPI_mask_sequence(mask, vector);
-}
-
-static inline void send_IPI_allbutself(int vector)
-{
-	cpumask_t mask = cpu_online_map;
-	cpu_clear(smp_processor_id(), mask);
-
-	if (!cpus_empty(mask))
-		send_IPI_mask(mask, vector);
-}
-
-static inline void send_IPI_all(int vector)
-{
-	send_IPI_mask(cpu_online_map, vector);
-}
-
-#endif /* __ASM_MACH_IPI_H */
diff --git a/include/asm-x86/mach-summit/mach_mpparse.h b/include/asm-x86/mach-summit/mach_mpparse.h
deleted file mode 100644
index fdf591701339..000000000000
--- a/include/asm-x86/mach-summit/mach_mpparse.h
+++ /dev/null
@@ -1,110 +0,0 @@
-#ifndef __ASM_MACH_MPPARSE_H
-#define __ASM_MACH_MPPARSE_H
-
-#include <mach_apic.h>
-#include <asm/tsc.h>
-
-extern int use_cyclone;
-
-#ifdef CONFIG_X86_SUMMIT_NUMA
-extern void setup_summit(void);
-#else
-#define setup_summit()	{}
-#endif
-
-static inline int mps_oem_check(struct mp_config_table *mpc, char *oem, 
-		char *productid)
-{
-	if (!strncmp(oem, "IBM ENSW", 8) && 
-			(!strncmp(productid, "VIGIL SMP", 9) 
-			 || !strncmp(productid, "EXA", 3)
-			 || !strncmp(productid, "RUTHLESS SMP", 12))){
-		mark_tsc_unstable("Summit based system");
-		use_cyclone = 1; /*enable cyclone-timer*/
-		setup_summit();
-		return 1;
-	}
-	return 0;
-}
-
-/* Hook from generic ACPI tables.c */
-static inline int acpi_madt_oem_check(char *oem_id, char *oem_table_id)
-{
-	if (!strncmp(oem_id, "IBM", 3) &&
-	    (!strncmp(oem_table_id, "SERVIGIL", 8)
-	     || !strncmp(oem_table_id, "EXA", 3))){
-		mark_tsc_unstable("Summit based system");
-		use_cyclone = 1; /*enable cyclone-timer*/
-		setup_summit();
-		return 1;
-	}
-	return 0;
-}
-
-struct rio_table_hdr {
-	unsigned char version;      /* Version number of this data structure           */
-	                            /* Version 3 adds chassis_num & WP_index           */
-	unsigned char num_scal_dev; /* # of Scalability devices (Twisters for Vigil)   */
-	unsigned char num_rio_dev;  /* # of RIO I/O devices (Cyclones and Winnipegs)   */
-} __attribute__((packed));
-
-struct scal_detail {
-	unsigned char node_id;      /* Scalability Node ID                             */
-	unsigned long CBAR;         /* Address of 1MB register space                   */
-	unsigned char port0node;    /* Node ID port connected to: 0xFF=None            */
-	unsigned char port0port;    /* Port num port connected to: 0,1,2, or 0xFF=None */
-	unsigned char port1node;    /* Node ID port connected to: 0xFF = None          */
-	unsigned char port1port;    /* Port num port connected to: 0,1,2, or 0xFF=None */
-	unsigned char port2node;    /* Node ID port connected to: 0xFF = None          */
-	unsigned char port2port;    /* Port num port connected to: 0,1,2, or 0xFF=None */
-	unsigned char chassis_num;  /* 1 based Chassis number (1 = boot node)          */
-} __attribute__((packed));
-
-struct rio_detail {
-	unsigned char node_id;      /* RIO Node ID                                     */
-	unsigned long BBAR;         /* Address of 1MB register space                   */
-	unsigned char type;         /* Type of device                                  */
-	unsigned char owner_id;     /* For WPEG: Node ID of Cyclone that owns this WPEG*/
-	                            /* For CYC:  Node ID of Twister that owns this CYC */
-	unsigned char port0node;    /* Node ID port connected to: 0xFF=None            */
-	unsigned char port0port;    /* Port num port connected to: 0,1,2, or 0xFF=None */
-	unsigned char port1node;    /* Node ID port connected to: 0xFF=None            */
-	unsigned char port1port;    /* Port num port connected to: 0,1,2, or 0xFF=None */
-	unsigned char first_slot;   /* For WPEG: Lowest slot number below this WPEG    */
-	                            /* For CYC:  0                                     */
-	unsigned char status;       /* For WPEG: Bit 0 = 1 : the XAPIC is used         */
-	                            /*                 = 0 : the XAPIC is not used, ie:*/
-	                            /*                     ints fwded to another XAPIC */
-	                            /*           Bits1:7 Reserved                      */
-	                            /* For CYC:  Bits0:7 Reserved                      */
-	unsigned char WP_index;     /* For WPEG: WPEG instance index - lower ones have */
-	                            /*           lower slot numbers/PCI bus numbers    */
-	                            /* For CYC:  No meaning                            */
-	unsigned char chassis_num;  /* 1 based Chassis number                          */
-	                            /* For LookOut WPEGs this field indicates the      */
-	                            /* Expansion Chassis #, enumerated from Boot       */
-	                            /* Node WPEG external port, then Boot Node CYC     */
-	                            /* external port, then Next Vigil chassis WPEG     */
-	                            /* external port, etc.                             */
-	                            /* Shared Lookouts have only 1 chassis number (the */
-	                            /* first one assigned)                             */
-} __attribute__((packed));
-
-
-typedef enum {
-	CompatTwister = 0,  /* Compatibility Twister               */
-	AltTwister    = 1,  /* Alternate Twister of internal 8-way */
-	CompatCyclone = 2,  /* Compatibility Cyclone               */
-	AltCyclone    = 3,  /* Alternate Cyclone of internal 8-way */
-	CompatWPEG    = 4,  /* Compatibility WPEG                  */
-	AltWPEG       = 5,  /* Second Planar WPEG                  */
-	LookOutAWPEG  = 6,  /* LookOut WPEG                        */
-	LookOutBWPEG  = 7,  /* LookOut WPEG                        */
-} node_type;
-
-static inline int is_WPEG(struct rio_detail *rio){
-	return (rio->type == CompatWPEG || rio->type == AltWPEG ||
-		rio->type == LookOutAWPEG || rio->type == LookOutBWPEG);
-}
-
-#endif /* __ASM_MACH_MPPARSE_H */
diff --git a/include/asm-x86/math_emu.h b/include/asm-x86/math_emu.h
index 9bf4ae93ab10..5768d8e95c8c 100644
--- a/include/asm-x86/math_emu.h
+++ b/include/asm-x86/math_emu.h
@@ -1,5 +1,5 @@
-#ifndef _I386_MATH_EMU_H
-#define _I386_MATH_EMU_H
+#ifndef ASM_X86__MATH_EMU_H
+#define ASM_X86__MATH_EMU_H
 
 /* This structure matches the layout of the data saved to the stack
    following a device-not-present interrupt, part of it saved
@@ -28,4 +28,4 @@ struct info {
 	long ___vm86_fs;
 	long ___vm86_gs;
 };
-#endif
+#endif /* ASM_X86__MATH_EMU_H */
diff --git a/include/asm-x86/mc146818rtc.h b/include/asm-x86/mc146818rtc.h
index daf1ccde77af..a995f33176cd 100644
--- a/include/asm-x86/mc146818rtc.h
+++ b/include/asm-x86/mc146818rtc.h
@@ -1,8 +1,8 @@
 /*
  * Machine dependent access functions for RTC registers.
  */
-#ifndef _ASM_MC146818RTC_H
-#define _ASM_MC146818RTC_H
+#ifndef ASM_X86__MC146818RTC_H
+#define ASM_X86__MC146818RTC_H
 
 #include <asm/io.h>
 #include <asm/system.h>
@@ -101,4 +101,4 @@ extern unsigned long mach_get_cmos_time(void);
 
 #define RTC_IRQ 8
 
-#endif /* _ASM_MC146818RTC_H */
+#endif /* ASM_X86__MC146818RTC_H */
diff --git a/include/asm-x86/mca.h b/include/asm-x86/mca.h
index 09adf2eac4dc..60d1ed287b13 100644
--- a/include/asm-x86/mca.h
+++ b/include/asm-x86/mca.h
@@ -1,8 +1,8 @@
 /* -*- mode: c; c-basic-offset: 8 -*- */
 
 /* Platform specific MCA defines */
-#ifndef _ASM_MCA_H
-#define _ASM_MCA_H
+#ifndef ASM_X86__MCA_H
+#define ASM_X86__MCA_H
 
 /* Maximal number of MCA slots - actually, some machines have less, but
  * they all have sufficient number of POS registers to cover 8.
@@ -40,4 +40,4 @@
  */
 #define MCA_NUMADAPTERS (MCA_MAX_SLOT_NR+3)
 
-#endif
+#endif /* ASM_X86__MCA_H */
diff --git a/include/asm-x86/mca_dma.h b/include/asm-x86/mca_dma.h
index c3dca6edc6b1..49f22be237d2 100644
--- a/include/asm-x86/mca_dma.h
+++ b/include/asm-x86/mca_dma.h
@@ -1,5 +1,5 @@
-#ifndef MCA_DMA_H
-#define MCA_DMA_H
+#ifndef ASM_X86__MCA_DMA_H
+#define ASM_X86__MCA_DMA_H
 
 #include <asm/io.h>
 #include <linux/ioport.h>
@@ -198,4 +198,4 @@ static inline void mca_set_dma_mode(unsigned int dmanr, unsigned int mode)
 	outb(mode, MCA_DMA_REG_EXE);
 }
 
-#endif /* MCA_DMA_H */
+#endif /* ASM_X86__MCA_DMA_H */
diff --git a/include/asm-x86/mce.h b/include/asm-x86/mce.h
index 94f1fd79e22a..036133eaf744 100644
--- a/include/asm-x86/mce.h
+++ b/include/asm-x86/mce.h
@@ -1,5 +1,5 @@
-#ifndef _ASM_X86_MCE_H
-#define _ASM_X86_MCE_H
+#ifndef ASM_X86__MCE_H
+#define ASM_X86__MCE_H
 
 #ifdef __x86_64__
 
@@ -92,6 +92,7 @@ extern int mce_disabled;
 
 void mce_log(struct mce *m);
 DECLARE_PER_CPU(struct sys_device, device_mce);
+extern void (*threshold_cpu_callback)(unsigned long action, unsigned int cpu);
 
 #ifdef CONFIG_X86_MCE_INTEL
 void mce_intel_feature_init(struct cpuinfo_x86 *c);
@@ -126,4 +127,4 @@ extern void restart_mce(void);
 
 #endif /* __KERNEL__ */
 
-#endif
+#endif /* ASM_X86__MCE_H */
diff --git a/include/asm-x86/mman.h b/include/asm-x86/mman.h
index c1682b542daf..4ef28e6de383 100644
--- a/include/asm-x86/mman.h
+++ b/include/asm-x86/mman.h
@@ -1,5 +1,5 @@
-#ifndef _ASM_X86_MMAN_H
-#define _ASM_X86_MMAN_H
+#ifndef ASM_X86__MMAN_H
+#define ASM_X86__MMAN_H
 
 #include <asm-generic/mman.h>
 
@@ -12,8 +12,9 @@
 #define MAP_NORESERVE	0x4000		/* don't check for reservations */
 #define MAP_POPULATE	0x8000		/* populate (prefault) pagetables */
 #define MAP_NONBLOCK	0x10000		/* do not block on IO */
+#define MAP_STACK	0x20000		/* give out an address that is best suited for process/thread stacks */
 
 #define MCL_CURRENT	1		/* lock all current mappings */
 #define MCL_FUTURE	2		/* lock all future mappings */
 
-#endif /* _ASM_X86_MMAN_H */
+#endif /* ASM_X86__MMAN_H */
diff --git a/include/asm-x86/mmconfig.h b/include/asm-x86/mmconfig.h
index 95beda07c6fa..fb79b1cf5d07 100644
--- a/include/asm-x86/mmconfig.h
+++ b/include/asm-x86/mmconfig.h
@@ -1,12 +1,12 @@
-#ifndef _ASM_MMCONFIG_H
-#define _ASM_MMCONFIG_H
+#ifndef ASM_X86__MMCONFIG_H
+#define ASM_X86__MMCONFIG_H
 
 #ifdef CONFIG_PCI_MMCONFIG
 extern void __cpuinit fam10h_check_enable_mmcfg(void);
-extern void __init check_enable_amd_mmconf_dmi(void);
+extern void __cpuinit check_enable_amd_mmconf_dmi(void);
 #else
 static inline void fam10h_check_enable_mmcfg(void) { }
 static inline void check_enable_amd_mmconf_dmi(void) { }
 #endif
 
-#endif
+#endif /* ASM_X86__MMCONFIG_H */
diff --git a/include/asm-x86/mmu.h b/include/asm-x86/mmu.h
index 00e88679e11f..a30d7a9c8297 100644
--- a/include/asm-x86/mmu.h
+++ b/include/asm-x86/mmu.h
@@ -1,5 +1,5 @@
-#ifndef _ASM_X86_MMU_H
-#define _ASM_X86_MMU_H
+#ifndef ASM_X86__MMU_H
+#define ASM_X86__MMU_H
 
 #include <linux/spinlock.h>
 #include <linux/mutex.h>
@@ -28,4 +28,4 @@ static inline void leave_mm(int cpu)
 }
 #endif
 
-#endif /* _ASM_X86_MMU_H */
+#endif /* ASM_X86__MMU_H */
diff --git a/include/asm-x86/mmu_context.h b/include/asm-x86/mmu_context.h
index fac57014e7c6..8ec940bfd079 100644
--- a/include/asm-x86/mmu_context.h
+++ b/include/asm-x86/mmu_context.h
@@ -1,5 +1,5 @@
-#ifndef __ASM_X86_MMU_CONTEXT_H
-#define __ASM_X86_MMU_CONTEXT_H
+#ifndef ASM_X86__MMU_CONTEXT_H
+#define ASM_X86__MMU_CONTEXT_H
 
 #include <asm/desc.h>
 #include <asm/atomic.h>
@@ -34,4 +34,4 @@ do {						\
 } while (0);
 
 
-#endif /* __ASM_X86_MMU_CONTEXT_H */
+#endif /* ASM_X86__MMU_CONTEXT_H */
diff --git a/include/asm-x86/mmu_context_32.h b/include/asm-x86/mmu_context_32.h
index 824fc575c6d8..cce6f6e4afd6 100644
--- a/include/asm-x86/mmu_context_32.h
+++ b/include/asm-x86/mmu_context_32.h
@@ -1,5 +1,5 @@
-#ifndef __I386_SCHED_H
-#define __I386_SCHED_H
+#ifndef ASM_X86__MMU_CONTEXT_32_H
+#define ASM_X86__MMU_CONTEXT_32_H
 
 static inline void enter_lazy_tlb(struct mm_struct *mm, struct task_struct *tsk)
 {
@@ -53,4 +53,4 @@ static inline void switch_mm(struct mm_struct *prev,
 #define deactivate_mm(tsk, mm)			\
 	asm("movl %0,%%gs": :"r" (0));
 
-#endif
+#endif /* ASM_X86__MMU_CONTEXT_32_H */
diff --git a/include/asm-x86/mmu_context_64.h b/include/asm-x86/mmu_context_64.h
index c7000634ccae..26758673c828 100644
--- a/include/asm-x86/mmu_context_64.h
+++ b/include/asm-x86/mmu_context_64.h
@@ -1,5 +1,5 @@
-#ifndef __X86_64_MMU_CONTEXT_H
-#define __X86_64_MMU_CONTEXT_H
+#ifndef ASM_X86__MMU_CONTEXT_64_H
+#define ASM_X86__MMU_CONTEXT_64_H
 
 #include <asm/pda.h>
 
@@ -51,4 +51,4 @@ do {						\
 	asm volatile("movl %0,%%fs"::"r"(0));	\
 } while (0)
 
-#endif
+#endif /* ASM_X86__MMU_CONTEXT_64_H */
diff --git a/include/asm-x86/mmx.h b/include/asm-x86/mmx.h
index 940881218ff8..2e7299bb3653 100644
--- a/include/asm-x86/mmx.h
+++ b/include/asm-x86/mmx.h
@@ -1,5 +1,5 @@
-#ifndef _ASM_MMX_H
-#define _ASM_MMX_H
+#ifndef ASM_X86__MMX_H
+#define ASM_X86__MMX_H
 
 /*
  *	MMX 3Dnow! helper operations
@@ -11,4 +11,4 @@ extern void *_mmx_memcpy(void *to, const void *from, size_t size);
 extern void mmx_clear_page(void *page);
 extern void mmx_copy_page(void *to, void *from);
 
-#endif
+#endif /* ASM_X86__MMX_H */
diff --git a/include/asm-x86/mmzone_32.h b/include/asm-x86/mmzone_32.h
index b2298a227567..121b65d61d86 100644
--- a/include/asm-x86/mmzone_32.h
+++ b/include/asm-x86/mmzone_32.h
@@ -3,8 +3,8 @@
  *
  */
 
-#ifndef _ASM_MMZONE_H_
-#define _ASM_MMZONE_H_
+#ifndef ASM_X86__MMZONE_32_H
+#define ASM_X86__MMZONE_32_H
 
 #include <asm/smp.h>
 
@@ -97,10 +97,16 @@ static inline int pfn_valid(int pfn)
 	reserve_bootmem_node(NODE_DATA(0), (addr), (size), (flags))
 #define alloc_bootmem(x) \
 	__alloc_bootmem_node(NODE_DATA(0), (x), SMP_CACHE_BYTES, __pa(MAX_DMA_ADDRESS))
+#define alloc_bootmem_nopanic(x) \
+	__alloc_bootmem_node_nopanic(NODE_DATA(0), (x), SMP_CACHE_BYTES, \
+				__pa(MAX_DMA_ADDRESS))
 #define alloc_bootmem_low(x) \
 	__alloc_bootmem_node(NODE_DATA(0), (x), SMP_CACHE_BYTES, 0)
 #define alloc_bootmem_pages(x) \
 	__alloc_bootmem_node(NODE_DATA(0), (x), PAGE_SIZE, __pa(MAX_DMA_ADDRESS))
+#define alloc_bootmem_pages_nopanic(x) \
+	__alloc_bootmem_node_nopanic(NODE_DATA(0), (x), PAGE_SIZE, \
+				__pa(MAX_DMA_ADDRESS))
 #define alloc_bootmem_low_pages(x) \
 	__alloc_bootmem_node(NODE_DATA(0), (x), PAGE_SIZE, 0)
 #define alloc_bootmem_node(pgdat, x)					\
@@ -125,4 +131,4 @@ static inline int pfn_valid(int pfn)
 })
 #endif /* CONFIG_NEED_MULTIPLE_NODES */
 
-#endif /* _ASM_MMZONE_H_ */
+#endif /* ASM_X86__MMZONE_32_H */
diff --git a/include/asm-x86/mmzone_64.h b/include/asm-x86/mmzone_64.h
index 594bd0dc1d08..626b03a14875 100644
--- a/include/asm-x86/mmzone_64.h
+++ b/include/asm-x86/mmzone_64.h
@@ -1,8 +1,8 @@
 /* K8 NUMA support */
 /* Copyright 2002,2003 by Andi Kleen, SuSE Labs */
 /* 2.5 Version loosely based on the NUMAQ Code by Pat Gaughen. */
-#ifndef _ASM_X86_64_MMZONE_H
-#define _ASM_X86_64_MMZONE_H 1
+#ifndef ASM_X86__MMZONE_64_H
+#define ASM_X86__MMZONE_64_H
 
 
 #ifdef CONFIG_NUMA
@@ -49,4 +49,4 @@ extern int early_pfn_to_nid(unsigned long pfn);
 #endif
 
 #endif
-#endif
+#endif /* ASM_X86__MMZONE_64_H */
diff --git a/include/asm-x86/module.h b/include/asm-x86/module.h
index bfedb247871c..48dc3e0c07d9 100644
--- a/include/asm-x86/module.h
+++ b/include/asm-x86/module.h
@@ -1,5 +1,5 @@
-#ifndef _ASM_MODULE_H
-#define _ASM_MODULE_H
+#ifndef ASM_X86__MODULE_H
+#define ASM_X86__MODULE_H
 
 /* x86_32/64 are simple */
 struct mod_arch_specific {};
@@ -79,4 +79,4 @@ struct mod_arch_specific {};
 # define MODULE_ARCH_VERMAGIC MODULE_PROC_FAMILY MODULE_STACKSIZE
 #endif
 
-#endif /* _ASM_MODULE_H */
+#endif /* ASM_X86__MODULE_H */
diff --git a/include/asm-x86/mpspec.h b/include/asm-x86/mpspec.h
index b6995e567fcc..118da365e371 100644
--- a/include/asm-x86/mpspec.h
+++ b/include/asm-x86/mpspec.h
@@ -1,5 +1,5 @@
-#ifndef _AM_X86_MPSPEC_H
-#define _AM_X86_MPSPEC_H
+#ifndef ASM_X86__MPSPEC_H
+#define ASM_X86__MPSPEC_H
 
 #include <linux/init.h>
 
@@ -141,4 +141,4 @@ static inline void physid_set_mask_of_physid(int physid, physid_mask_t *map)
 
 extern physid_mask_t phys_cpu_present_map;
 
-#endif
+#endif /* ASM_X86__MPSPEC_H */
diff --git a/include/asm-x86/mpspec_def.h b/include/asm-x86/mpspec_def.h
index 38d1e73b49e4..79166b048012 100644
--- a/include/asm-x86/mpspec_def.h
+++ b/include/asm-x86/mpspec_def.h
@@ -1,5 +1,5 @@
-#ifndef __ASM_MPSPEC_DEF_H
-#define __ASM_MPSPEC_DEF_H
+#ifndef ASM_X86__MPSPEC_DEF_H
+#define ASM_X86__MPSPEC_DEF_H
 
 /*
  * Structure definitions for SMP machines following the
@@ -177,4 +177,4 @@ enum mp_bustype {
 	MP_BUS_PCI,
 	MP_BUS_MCA,
 };
-#endif
+#endif /* ASM_X86__MPSPEC_DEF_H */
diff --git a/include/asm-x86/msgbuf.h b/include/asm-x86/msgbuf.h
index 7e4e9481f51c..1b538c907a3d 100644
--- a/include/asm-x86/msgbuf.h
+++ b/include/asm-x86/msgbuf.h
@@ -1,5 +1,5 @@
-#ifndef _ASM_X86_MSGBUF_H
-#define _ASM_X86_MSGBUF_H
+#ifndef ASM_X86__MSGBUF_H
+#define ASM_X86__MSGBUF_H
 
 /*
  * The msqid64_ds structure for i386 architecture.
@@ -36,4 +36,4 @@ struct msqid64_ds {
 	unsigned long  __unused5;
 };
 
-#endif /* _ASM_X86_MSGBUF_H */
+#endif /* ASM_X86__MSGBUF_H */
diff --git a/include/asm-x86/msidef.h b/include/asm-x86/msidef.h
index 296f29ce426d..ed9190246876 100644
--- a/include/asm-x86/msidef.h
+++ b/include/asm-x86/msidef.h
@@ -1,5 +1,5 @@
-#ifndef ASM_MSIDEF_H
-#define ASM_MSIDEF_H
+#ifndef ASM_X86__MSIDEF_H
+#define ASM_X86__MSIDEF_H
 
 /*
  * Constants for Intel APIC based MSI messages.
@@ -48,4 +48,8 @@
 #define  MSI_ADDR_DEST_ID(dest)		(((dest) << MSI_ADDR_DEST_ID_SHIFT) & \
 					 MSI_ADDR_DEST_ID_MASK)
 
-#endif /* ASM_MSIDEF_H */
+#define MSI_ADDR_IR_EXT_INT		(1 << 4)
+#define MSI_ADDR_IR_SHV			(1 << 3)
+#define MSI_ADDR_IR_INDEX1(index)	((index & 0x8000) >> 13)
+#define MSI_ADDR_IR_INDEX2(index)	((index & 0x7fff) << 5)
+#endif /* ASM_X86__MSIDEF_H */
diff --git a/include/asm-x86/msr-index.h b/include/asm-x86/msr-index.h
index 44bce773012e..3052f058ab06 100644
--- a/include/asm-x86/msr-index.h
+++ b/include/asm-x86/msr-index.h
@@ -1,5 +1,5 @@
-#ifndef __ASM_MSR_INDEX_H
-#define __ASM_MSR_INDEX_H
+#ifndef ASM_X86__MSR_INDEX_H
+#define ASM_X86__MSR_INDEX_H
 
 /* CPU model specific register (MSR) numbers */
 
@@ -310,4 +310,4 @@
 /* Geode defined MSRs */
 #define MSR_GEODE_BUSCONT_CONF0		0x00001900
 
-#endif /* __ASM_MSR_INDEX_H */
+#endif /* ASM_X86__MSR_INDEX_H */
diff --git a/include/asm-x86/msr.h b/include/asm-x86/msr.h
index ca110ee73f07..530af1f6389e 100644
--- a/include/asm-x86/msr.h
+++ b/include/asm-x86/msr.h
@@ -1,5 +1,5 @@
-#ifndef __ASM_X86_MSR_H_
-#define __ASM_X86_MSR_H_
+#ifndef ASM_X86__MSR_H
+#define ASM_X86__MSR_H
 
 #include <asm/msr-index.h>
 
@@ -52,6 +52,22 @@ static inline unsigned long long native_read_msr_safe(unsigned int msr,
 {
 	DECLARE_ARGS(val, low, high);
 
+	asm volatile("2: rdmsr ; xor %[err],%[err]\n"
+		     "1:\n\t"
+		     ".section .fixup,\"ax\"\n\t"
+		     "3:  mov %[fault],%[err] ; jmp 1b\n\t"
+		     ".previous\n\t"
+		     _ASM_EXTABLE(2b, 3b)
+		     : [err] "=r" (*err), EAX_EDX_RET(val, low, high)
+		     : "c" (msr), [fault] "i" (-EFAULT));
+	return EAX_EDX_VAL(val, low, high);
+}
+
+static inline unsigned long long native_read_msr_amd_safe(unsigned int msr,
+						      int *err)
+{
+	DECLARE_ARGS(val, low, high);
+
 	asm volatile("2: rdmsr ; xor %0,%0\n"
 		     "1:\n\t"
 		     ".section .fixup,\"ax\"\n\t"
@@ -59,7 +75,7 @@ static inline unsigned long long native_read_msr_safe(unsigned int msr,
 		     ".previous\n\t"
 		     _ASM_EXTABLE(2b, 3b)
 		     : "=r" (*err), EAX_EDX_RET(val, low, high)
-		     : "c" (msr), "i" (-EFAULT));
+		     : "c" (msr), "D" (0x9c5a203a), "i" (-EFAULT));
 	return EAX_EDX_VAL(val, low, high);
 }
 
@@ -73,15 +89,15 @@ static inline int native_write_msr_safe(unsigned int msr,
 					unsigned low, unsigned high)
 {
 	int err;
-	asm volatile("2: wrmsr ; xor %0,%0\n"
+	asm volatile("2: wrmsr ; xor %[err],%[err]\n"
 		     "1:\n\t"
 		     ".section .fixup,\"ax\"\n\t"
-		     "3:  mov %4,%0 ; jmp 1b\n\t"
+		     "3:  mov %[fault],%[err] ; jmp 1b\n\t"
 		     ".previous\n\t"
 		     _ASM_EXTABLE(2b, 3b)
-		     : "=a" (err)
+		     : [err] "=a" (err)
 		     : "c" (msr), "0" (low), "d" (high),
-		       "i" (-EFAULT)
+		       [fault] "i" (-EFAULT)
 		     : "memory");
 	return err;
 }
@@ -158,6 +174,13 @@ static inline int rdmsrl_safe(unsigned msr, unsigned long long *p)
 	*p = native_read_msr_safe(msr, &err);
 	return err;
 }
+static inline int rdmsrl_amd_safe(unsigned msr, unsigned long long *p)
+{
+	int err;
+
+	*p = native_read_msr_amd_safe(msr, &err);
+	return err;
+}
 
 #define rdtscl(low)						\
 	((low) = (u32)native_read_tsc())
@@ -192,19 +215,20 @@ do {                                                            \
 #define write_rdtscp_aux(val) wrmsr(0xc0000103, (val), 0)
 
 #ifdef CONFIG_SMP
-void rdmsr_on_cpu(unsigned int cpu, u32 msr_no, u32 *l, u32 *h);
-void wrmsr_on_cpu(unsigned int cpu, u32 msr_no, u32 l, u32 h);
+int rdmsr_on_cpu(unsigned int cpu, u32 msr_no, u32 *l, u32 *h);
+int wrmsr_on_cpu(unsigned int cpu, u32 msr_no, u32 l, u32 h);
 int rdmsr_safe_on_cpu(unsigned int cpu, u32 msr_no, u32 *l, u32 *h);
-
 int wrmsr_safe_on_cpu(unsigned int cpu, u32 msr_no, u32 l, u32 h);
 #else  /*  CONFIG_SMP  */
-static inline void rdmsr_on_cpu(unsigned int cpu, u32 msr_no, u32 *l, u32 *h)
+static inline int rdmsr_on_cpu(unsigned int cpu, u32 msr_no, u32 *l, u32 *h)
 {
 	rdmsr(msr_no, *l, *h);
+	return 0;
 }
-static inline void wrmsr_on_cpu(unsigned int cpu, u32 msr_no, u32 l, u32 h)
+static inline int wrmsr_on_cpu(unsigned int cpu, u32 msr_no, u32 l, u32 h)
 {
 	wrmsr(msr_no, l, h);
+	return 0;
 }
 static inline int rdmsr_safe_on_cpu(unsigned int cpu, u32 msr_no,
 				    u32 *l, u32 *h)
@@ -220,4 +244,4 @@ static inline int wrmsr_safe_on_cpu(unsigned int cpu, u32 msr_no, u32 l, u32 h)
 #endif /* __KERNEL__ */
 
 
-#endif
+#endif /* ASM_X86__MSR_H */
diff --git a/include/asm-x86/mtrr.h b/include/asm-x86/mtrr.h
index a69a01a51729..23a7f83da953 100644
--- a/include/asm-x86/mtrr.h
+++ b/include/asm-x86/mtrr.h
@@ -20,8 +20,8 @@
     The postal address is:
       Richard Gooch, c/o ATNF, P. O. Box 76, Epping, N.S.W., 2121, Australia.
 */
-#ifndef _ASM_X86_MTRR_H
-#define _ASM_X86_MTRR_H
+#ifndef ASM_X86__MTRR_H
+#define ASM_X86__MTRR_H
 
 #include <linux/ioctl.h>
 #include <linux/errno.h>
@@ -170,4 +170,4 @@ struct mtrr_gentry32 {
 
 #endif /* __KERNEL__ */
 
-#endif  /*  _ASM_X86_MTRR_H  */
+#endif /* ASM_X86__MTRR_H */
diff --git a/include/asm-x86/mutex_32.h b/include/asm-x86/mutex_32.h
index 73e928ef5f03..25c16d8ba3c7 100644
--- a/include/asm-x86/mutex_32.h
+++ b/include/asm-x86/mutex_32.h
@@ -6,8 +6,8 @@
  *
  *  Copyright (C) 2004, 2005, 2006 Red Hat, Inc., Ingo Molnar <mingo@redhat.com>
  */
-#ifndef _ASM_MUTEX_H
-#define _ASM_MUTEX_H
+#ifndef ASM_X86__MUTEX_32_H
+#define ASM_X86__MUTEX_32_H
 
 #include <asm/alternative.h>
 
@@ -122,4 +122,4 @@ static inline int __mutex_fastpath_trylock(atomic_t *count,
 #endif
 }
 
-#endif
+#endif /* ASM_X86__MUTEX_32_H */
diff --git a/include/asm-x86/mutex_64.h b/include/asm-x86/mutex_64.h
index f3fae9becb38..918ba21ab9d9 100644
--- a/include/asm-x86/mutex_64.h
+++ b/include/asm-x86/mutex_64.h
@@ -6,8 +6,8 @@
  *
  *  Copyright (C) 2004, 2005, 2006 Red Hat, Inc., Ingo Molnar <mingo@redhat.com>
  */
-#ifndef _ASM_MUTEX_H
-#define _ASM_MUTEX_H
+#ifndef ASM_X86__MUTEX_64_H
+#define ASM_X86__MUTEX_64_H
 
 /**
  * __mutex_fastpath_lock - decrement and call function if negative
@@ -97,4 +97,4 @@ static inline int __mutex_fastpath_trylock(atomic_t *count,
 		return 0;
 }
 
-#endif
+#endif /* ASM_X86__MUTEX_64_H */
diff --git a/include/asm-x86/namei.h b/include/asm-x86/namei.h
deleted file mode 100644
index 415ef5d9550e..000000000000
--- a/include/asm-x86/namei.h
+++ /dev/null
@@ -1,11 +0,0 @@
-#ifndef _ASM_X86_NAMEI_H
-#define _ASM_X86_NAMEI_H
-
-/* This dummy routine maybe changed to something useful
- * for /usr/gnemul/ emulation stuff.
- * Look at asm-sparc/namei.h for details.
- */
-
-#define __emul_prefix() NULL
-
-#endif /* _ASM_X86_NAMEI_H */
diff --git a/include/asm-x86/nmi.h b/include/asm-x86/nmi.h
index 21f8d0202a82..f8b76f383904 100644
--- a/include/asm-x86/nmi.h
+++ b/include/asm-x86/nmi.h
@@ -1,5 +1,5 @@
-#ifndef _ASM_X86_NMI_H_
-#define _ASM_X86_NMI_H_
+#ifndef ASM_X86__NMI_H
+#define ASM_X86__NMI_H
 
 #include <linux/pm.h>
 #include <asm/irq.h>
@@ -81,4 +81,4 @@ void enable_lapic_nmi_watchdog(void);
 void stop_nmi(void);
 void restart_nmi(void);
 
-#endif
+#endif /* ASM_X86__NMI_H */
diff --git a/include/asm-x86/nops.h b/include/asm-x86/nops.h
index ad0bedd10b89..ae742721ae73 100644
--- a/include/asm-x86/nops.h
+++ b/include/asm-x86/nops.h
@@ -1,5 +1,5 @@
-#ifndef _ASM_NOPS_H
-#define _ASM_NOPS_H 1
+#ifndef ASM_X86__NOPS_H
+#define ASM_X86__NOPS_H
 
 /* Define nops for use with alternative() */
 
@@ -115,4 +115,4 @@
 
 #define ASM_NOP_MAX 8
 
-#endif
+#endif /* ASM_X86__NOPS_H */
diff --git a/include/asm-x86/numa_32.h b/include/asm-x86/numa_32.h
index 220d7b7707a0..44cb07855c5b 100644
--- a/include/asm-x86/numa_32.h
+++ b/include/asm-x86/numa_32.h
@@ -1,5 +1,5 @@
-#ifndef _ASM_X86_32_NUMA_H
-#define _ASM_X86_32_NUMA_H 1
+#ifndef ASM_X86__NUMA_32_H
+#define ASM_X86__NUMA_32_H
 
 extern int pxm_to_nid(int pxm);
 extern void numa_remove_cpu(int cpu);
@@ -8,4 +8,4 @@ extern void numa_remove_cpu(int cpu);
 extern void set_highmem_pages_init(void);
 #endif
 
-#endif /* _ASM_X86_32_NUMA_H */
+#endif /* ASM_X86__NUMA_32_H */
diff --git a/include/asm-x86/numa_64.h b/include/asm-x86/numa_64.h
index 3830094434a9..15c990395b02 100644
--- a/include/asm-x86/numa_64.h
+++ b/include/asm-x86/numa_64.h
@@ -1,5 +1,5 @@
-#ifndef _ASM_X8664_NUMA_H
-#define _ASM_X8664_NUMA_H 1
+#ifndef ASM_X86__NUMA_64_H
+#define ASM_X86__NUMA_64_H
 
 #include <linux/nodemask.h>
 #include <asm/apicdef.h>
@@ -40,4 +40,4 @@ static inline void numa_add_cpu(int cpu, int node)	{ }
 static inline void numa_remove_cpu(int cpu)		{ }
 #endif
 
-#endif
+#endif /* ASM_X86__NUMA_64_H */
diff --git a/include/asm-x86/numaq.h b/include/asm-x86/numaq.h
index 34b92d581fa3..124bf7d4b70a 100644
--- a/include/asm-x86/numaq.h
+++ b/include/asm-x86/numaq.h
@@ -23,8 +23,8 @@
  * Send feedback to <gone@us.ibm.com>
  */
 
-#ifndef NUMAQ_H
-#define NUMAQ_H
+#ifndef ASM_X86__NUMAQ_H
+#define ASM_X86__NUMAQ_H
 
 #ifdef CONFIG_X86_NUMAQ
 
@@ -165,5 +165,5 @@ static inline int get_memcfg_numaq(void)
 	return 0;
 }
 #endif /* CONFIG_X86_NUMAQ */
-#endif /* NUMAQ_H */
+#endif /* ASM_X86__NUMAQ_H */
 
diff --git a/include/asm-x86/numaq/apic.h b/include/asm-x86/numaq/apic.h
new file mode 100644
index 000000000000..a8344ba6ea15
--- /dev/null
+++ b/include/asm-x86/numaq/apic.h
@@ -0,0 +1,138 @@
+#ifndef __ASM_NUMAQ_APIC_H
+#define __ASM_NUMAQ_APIC_H
+
+#include <asm/io.h>
+#include <linux/mmzone.h>
+#include <linux/nodemask.h>
+
+#define APIC_DFR_VALUE	(APIC_DFR_CLUSTER)
+
+static inline cpumask_t target_cpus(void)
+{
+	return CPU_MASK_ALL;
+}
+
+#define TARGET_CPUS (target_cpus())
+
+#define NO_BALANCE_IRQ (1)
+#define esr_disable (1)
+
+#define INT_DELIVERY_MODE dest_LowestPrio
+#define INT_DEST_MODE 0     /* physical delivery on LOCAL quad */
+ 
+static inline unsigned long check_apicid_used(physid_mask_t bitmap, int apicid)
+{
+	return physid_isset(apicid, bitmap);
+}
+static inline unsigned long check_apicid_present(int bit)
+{
+	return physid_isset(bit, phys_cpu_present_map);
+}
+#define apicid_cluster(apicid) (apicid & 0xF0)
+
+static inline int apic_id_registered(void)
+{
+	return 1;
+}
+
+static inline void init_apic_ldr(void)
+{
+	/* Already done in NUMA-Q firmware */
+}
+
+static inline void setup_apic_routing(void)
+{
+	printk("Enabling APIC mode:  %s.  Using %d I/O APICs\n",
+		"NUMA-Q", nr_ioapics);
+}
+
+/*
+ * Skip adding the timer int on secondary nodes, which causes
+ * a small but painful rift in the time-space continuum.
+ */
+static inline int multi_timer_check(int apic, int irq)
+{
+	return apic != 0 && irq == 0;
+}
+
+static inline physid_mask_t ioapic_phys_id_map(physid_mask_t phys_map)
+{
+	/* We don't have a good way to do this yet - hack */
+	return physids_promote(0xFUL);
+}
+
+/* Mapping from cpu number to logical apicid */
+extern u8 cpu_2_logical_apicid[];
+static inline int cpu_to_logical_apicid(int cpu)
+{
+       if (cpu >= NR_CPUS)
+	       return BAD_APICID;
+	return (int)cpu_2_logical_apicid[cpu];
+}
+
+/*
+ * Supporting over 60 cpus on NUMA-Q requires a locality-dependent
+ * cpu to APIC ID relation to properly interact with the intelligent
+ * mode of the cluster controller.
+ */
+static inline int cpu_present_to_apicid(int mps_cpu)
+{
+	if (mps_cpu < 60)
+		return ((mps_cpu >> 2) << 4) | (1 << (mps_cpu & 0x3));
+	else
+		return BAD_APICID;
+}
+
+static inline int apicid_to_node(int logical_apicid) 
+{
+	return logical_apicid >> 4;
+}
+
+static inline physid_mask_t apicid_to_cpu_present(int logical_apicid)
+{
+	int node = apicid_to_node(logical_apicid);
+	int cpu = __ffs(logical_apicid & 0xf);
+
+	return physid_mask_of_physid(cpu + 4*node);
+}
+
+extern void *xquad_portio;
+
+static inline void setup_portio_remap(void)
+{
+	int num_quads = num_online_nodes();
+
+	if (num_quads <= 1)
+       		return;
+
+	printk("Remapping cross-quad port I/O for %d quads\n", num_quads);
+	xquad_portio = ioremap(XQUAD_PORTIO_BASE, num_quads*XQUAD_PORTIO_QUAD);
+	printk("xquad_portio vaddr 0x%08lx, len %08lx\n",
+		(u_long) xquad_portio, (u_long) num_quads*XQUAD_PORTIO_QUAD);
+}
+
+static inline int check_phys_apicid_present(int boot_cpu_physical_apicid)
+{
+	return (1);
+}
+
+static inline void enable_apic_mode(void)
+{
+}
+
+/*
+ * We use physical apicids here, not logical, so just return the default
+ * physical broadcast to stop people from breaking us
+ */
+static inline unsigned int cpu_mask_to_apicid(cpumask_t cpumask)
+{
+	return (int) 0xF;
+}
+
+/* No NUMA-Q box has a HT CPU, but it can't hurt to use the default code. */
+static inline u32 phys_pkg_id(u32 cpuid_apic, int index_msb)
+{
+	return cpuid_apic >> index_msb;
+}
+
+#endif /* __ASM_NUMAQ_APIC_H */
diff --git a/include/asm-x86/numaq/apicdef.h b/include/asm-x86/numaq/apicdef.h
new file mode 100644
index 000000000000..e012a46cc22a
--- /dev/null
+++ b/include/asm-x86/numaq/apicdef.h
@@ -0,0 +1,14 @@
+#ifndef __ASM_NUMAQ_APICDEF_H
+#define __ASM_NUMAQ_APICDEF_H
+
+
+#define APIC_ID_MASK (0xF<<24)
+
+static inline unsigned get_apic_id(unsigned long x)
+{
+	        return (((x)>>24)&0x0F);
+}
+
+#define         GET_APIC_ID(x)  get_apic_id(x)
+
+#endif
diff --git a/include/asm-x86/numaq/ipi.h b/include/asm-x86/numaq/ipi.h
new file mode 100644
index 000000000000..935588d286cf
--- /dev/null
+++ b/include/asm-x86/numaq/ipi.h
@@ -0,0 +1,25 @@
+#ifndef __ASM_NUMAQ_IPI_H
+#define __ASM_NUMAQ_IPI_H
+
+void send_IPI_mask_sequence(cpumask_t, int vector);
+
+static inline void send_IPI_mask(cpumask_t mask, int vector)
+{
+	send_IPI_mask_sequence(mask, vector);
+}
+
+static inline void send_IPI_allbutself(int vector)
+{
+	cpumask_t mask = cpu_online_map;
+	cpu_clear(smp_processor_id(), mask);
+
+	if (!cpus_empty(mask))
+		send_IPI_mask(mask, vector);
+}
+
+static inline void send_IPI_all(int vector)
+{
+	send_IPI_mask(cpu_online_map, vector);
+}
+
+#endif /* __ASM_NUMAQ_IPI_H */
diff --git a/include/asm-x86/numaq/mpparse.h b/include/asm-x86/numaq/mpparse.h
new file mode 100644
index 000000000000..252292e077b6
--- /dev/null
+++ b/include/asm-x86/numaq/mpparse.h
@@ -0,0 +1,7 @@
+#ifndef __ASM_NUMAQ_MPPARSE_H
+#define __ASM_NUMAQ_MPPARSE_H
+
+extern void numaq_mps_oem_check(struct mp_config_table *mpc, char *oem,
+				char *productid);
+
+#endif /* __ASM_NUMAQ_MPPARSE_H */
diff --git a/include/asm-x86/numaq/wakecpu.h b/include/asm-x86/numaq/wakecpu.h
new file mode 100644
index 000000000000..c577bda5b1c5
--- /dev/null
+++ b/include/asm-x86/numaq/wakecpu.h
@@ -0,0 +1,43 @@
+#ifndef __ASM_NUMAQ_WAKECPU_H
+#define __ASM_NUMAQ_WAKECPU_H
+
+/* This file copes with machines that wakeup secondary CPUs by NMIs */
+
+#define WAKE_SECONDARY_VIA_NMI
+
+#define TRAMPOLINE_LOW phys_to_virt(0x8)
+#define TRAMPOLINE_HIGH phys_to_virt(0xa)
+
+#define boot_cpu_apicid boot_cpu_logical_apicid
+
+/* We don't do anything here because we use NMI's to boot instead */
+static inline void wait_for_init_deassert(atomic_t *deassert)
+{
+}
+
+/*
+ * Because we use NMIs rather than the INIT-STARTUP sequence to
+ * bootstrap the CPUs, the APIC may be in a weird state. Kick it.
+ */
+static inline void smp_callin_clear_local_apic(void)
+{
+	clear_local_APIC();
+}
+
+static inline void store_NMI_vector(unsigned short *high, unsigned short *low)
+{
+	printk("Storing NMI vector\n");
+	*high = *((volatile unsigned short *) TRAMPOLINE_HIGH);
+	*low = *((volatile unsigned short *) TRAMPOLINE_LOW);
+}
+
+static inline void restore_NMI_vector(unsigned short *high, unsigned short *low)
+{
+	printk("Restoring NMI vector\n");
+	*((volatile unsigned short *) TRAMPOLINE_HIGH) = *high;
+	*((volatile unsigned short *) TRAMPOLINE_LOW) = *low;
+}
+
+#define inquire_remote_apic(apicid) {}
+
+#endif /* __ASM_NUMAQ_WAKECPU_H */
diff --git a/include/asm-x86/olpc.h b/include/asm-x86/olpc.h
index 97d47133486f..d7328b1a05c1 100644
--- a/include/asm-x86/olpc.h
+++ b/include/asm-x86/olpc.h
@@ -1,7 +1,7 @@
 /* OLPC machine specific definitions */
 
-#ifndef ASM_OLPC_H_
-#define ASM_OLPC_H_
+#ifndef ASM_X86__OLPC_H
+#define ASM_X86__OLPC_H
 
 #include <asm/geode.h>
 
@@ -129,4 +129,4 @@ extern int olpc_ec_mask_unset(uint8_t bits);
 #define OLPC_GPIO_LID		geode_gpio(26)
 #define OLPC_GPIO_ECSCI		geode_gpio(27)
 
-#endif
+#endif /* ASM_X86__OLPC_H */
diff --git a/include/asm-x86/page.h b/include/asm-x86/page.h
index 49982110e4d9..79544e6ffb8b 100644
--- a/include/asm-x86/page.h
+++ b/include/asm-x86/page.h
@@ -1,5 +1,5 @@
-#ifndef _ASM_X86_PAGE_H
-#define _ASM_X86_PAGE_H
+#ifndef ASM_X86__PAGE_H
+#define ASM_X86__PAGE_H
 
 #include <linux/const.h>
 
@@ -199,4 +199,4 @@ static inline pteval_t native_pte_flags(pte_t pte)
 #define __HAVE_ARCH_GATE_AREA 1
 
 #endif	/* __KERNEL__ */
-#endif	/* _ASM_X86_PAGE_H */
+#endif /* ASM_X86__PAGE_H */
diff --git a/include/asm-x86/page_32.h b/include/asm-x86/page_32.h
index ab8528793f08..f32062a821c5 100644
--- a/include/asm-x86/page_32.h
+++ b/include/asm-x86/page_32.h
@@ -1,5 +1,5 @@
-#ifndef _ASM_X86_PAGE_32_H
-#define _ASM_X86_PAGE_32_H
+#ifndef ASM_X86__PAGE_32_H
+#define ASM_X86__PAGE_32_H
 
 /*
  * This handles the memory map.
@@ -96,6 +96,7 @@ extern void find_low_pfn_range(void);
 extern unsigned long init_memory_mapping(unsigned long start,
 					 unsigned long end);
 extern void initmem_init(unsigned long, unsigned long);
+extern void free_initmem(void);
 extern void setup_bootmem_allocator(void);
 
 
@@ -126,4 +127,4 @@ static inline void copy_page(void *to, void *from)
 #endif	/* CONFIG_X86_3DNOW */
 #endif	/* !__ASSEMBLY__ */
 
-#endif /* _ASM_X86_PAGE_32_H */
+#endif /* ASM_X86__PAGE_32_H */
diff --git a/include/asm-x86/page_64.h b/include/asm-x86/page_64.h
index c6916c83e6b1..5e64acfed0a4 100644
--- a/include/asm-x86/page_64.h
+++ b/include/asm-x86/page_64.h
@@ -1,5 +1,5 @@
-#ifndef _X86_64_PAGE_H
-#define _X86_64_PAGE_H
+#ifndef ASM_X86__PAGE_64_H
+#define ASM_X86__PAGE_64_H
 
 #define PAGETABLE_LEVELS	4
 
@@ -91,6 +91,7 @@ extern unsigned long init_memory_mapping(unsigned long start,
 					 unsigned long end);
 
 extern void initmem_init(unsigned long start_pfn, unsigned long end_pfn);
+extern void free_initmem(void);
 
 extern void init_extra_mapping_uc(unsigned long phys, unsigned long size);
 extern void init_extra_mapping_wb(unsigned long phys, unsigned long size);
@@ -102,4 +103,4 @@ extern void init_extra_mapping_wb(unsigned long phys, unsigned long size);
 #endif
 
 
-#endif /* _X86_64_PAGE_H */
+#endif /* ASM_X86__PAGE_64_H */
diff --git a/include/asm-x86/param.h b/include/asm-x86/param.h
index 6f0d0422f4ca..0009cfb11a5f 100644
--- a/include/asm-x86/param.h
+++ b/include/asm-x86/param.h
@@ -1,5 +1,5 @@
-#ifndef _ASM_X86_PARAM_H
-#define _ASM_X86_PARAM_H
+#ifndef ASM_X86__PARAM_H
+#define ASM_X86__PARAM_H
 
 #ifdef __KERNEL__
 # define HZ		CONFIG_HZ	/* Internal kernel timer frequency */
@@ -19,4 +19,4 @@
 
 #define MAXHOSTNAMELEN	64	/* max length of hostname */
 
-#endif /* _ASM_X86_PARAM_H */
+#endif /* ASM_X86__PARAM_H */
diff --git a/include/asm-x86/paravirt.h b/include/asm-x86/paravirt.h
index fbbde93f12d6..cba612c89e06 100644
--- a/include/asm-x86/paravirt.h
+++ b/include/asm-x86/paravirt.h
@@ -1,5 +1,5 @@
-#ifndef __ASM_PARAVIRT_H
-#define __ASM_PARAVIRT_H
+#ifndef ASM_X86__PARAVIRT_H
+#define ASM_X86__PARAVIRT_H
 /* Various instructions on x86 need to be replaced for
  * para-virtualization: those hooks are defined here. */
 
@@ -137,6 +137,7 @@ struct pv_cpu_ops {
 
 	/* MSR, PMC and TSR operations.
 	   err = 0/-EFAULT.  wrmsr returns 0/-EFAULT. */
+	u64 (*read_msr_amd)(unsigned int msr, int *err);
 	u64 (*read_msr)(unsigned int msr, int *err);
 	int (*write_msr)(unsigned int msr, unsigned low, unsigned high);
 
@@ -200,12 +201,6 @@ struct pv_irq_ops {
 
 struct pv_apic_ops {
 #ifdef CONFIG_X86_LOCAL_APIC
-	/*
-	 * Direct APIC operations, principally for VMI.  Ideally
-	 * these shouldn't be in this interface.
-	 */
-	void (*apic_write)(unsigned long reg, u32 v);
-	u32 (*apic_read)(unsigned long reg);
 	void (*setup_boot_clock)(void);
 	void (*setup_secondary_clock)(void);
 
@@ -726,6 +721,10 @@ static inline u64 paravirt_read_msr(unsigned msr, int *err)
 {
 	return PVOP_CALL2(u64, pv_cpu_ops.read_msr, msr, err);
 }
+static inline u64 paravirt_read_msr_amd(unsigned msr, int *err)
+{
+	return PVOP_CALL2(u64, pv_cpu_ops.read_msr_amd, msr, err);
+}
 static inline int paravirt_write_msr(unsigned msr, unsigned low, unsigned high)
 {
 	return PVOP_CALL3(int, pv_cpu_ops.write_msr, msr, low, high);
@@ -771,6 +770,13 @@ static inline int rdmsrl_safe(unsigned msr, unsigned long long *p)
 	*p = paravirt_read_msr(msr, &err);
 	return err;
 }
+static inline int rdmsrl_amd_safe(unsigned msr, unsigned long long *p)
+{
+	int err;
+
+	*p = paravirt_read_msr_amd(msr, &err);
+	return err;
+}
 
 static inline u64 paravirt_read_tsc(void)
 {
@@ -898,19 +904,6 @@ static inline void slow_down_io(void)
 }
 
 #ifdef CONFIG_X86_LOCAL_APIC
-/*
- * Basic functions accessing APICs.
- */
-static inline void apic_write(unsigned long reg, u32 v)
-{
-	PVOP_VCALL2(pv_apic_ops.apic_write, reg, v);
-}
-
-static inline u32 apic_read(unsigned long reg)
-{
-	return PVOP_CALL1(unsigned long, pv_apic_ops.apic_read, reg);
-}
-
 static inline void setup_boot_clock(void)
 {
 	PVOP_VCALL0(pv_apic_ops.setup_boot_clock);
@@ -1634,4 +1627,4 @@ static inline unsigned long __raw_local_irq_save(void)
 
 #endif /* __ASSEMBLY__ */
 #endif /* CONFIG_PARAVIRT */
-#endif	/* __ASM_PARAVIRT_H */
+#endif /* ASM_X86__PARAVIRT_H */
diff --git a/include/asm-x86/parport.h b/include/asm-x86/parport.h
index 3c4ffeb467e9..2e3dda4dc3d9 100644
--- a/include/asm-x86/parport.h
+++ b/include/asm-x86/parport.h
@@ -1,5 +1,5 @@
-#ifndef _ASM_X86_PARPORT_H
-#define _ASM_X86_PARPORT_H
+#ifndef ASM_X86__PARPORT_H
+#define ASM_X86__PARPORT_H
 
 static int __devinit parport_pc_find_isa_ports(int autoirq, int autodma);
 static int __devinit parport_pc_find_nonpci_ports(int autoirq, int autodma)
@@ -7,4 +7,4 @@ static int __devinit parport_pc_find_nonpci_ports(int autoirq, int autodma)
 	return parport_pc_find_isa_ports(autoirq, autodma);
 }
 
-#endif /* _ASM_X86_PARPORT_H */
+#endif /* ASM_X86__PARPORT_H */
diff --git a/include/asm-x86/pat.h b/include/asm-x86/pat.h
index 7edc47307217..482c3e3f9879 100644
--- a/include/asm-x86/pat.h
+++ b/include/asm-x86/pat.h
@@ -1,5 +1,5 @@
-#ifndef _ASM_PAT_H
-#define _ASM_PAT_H
+#ifndef ASM_X86__PAT_H
+#define ASM_X86__PAT_H
 
 #include <linux/types.h>
 
@@ -19,4 +19,4 @@ extern int free_memtype(u64 start, u64 end);
 
 extern void pat_disable(char *reason);
 
-#endif
+#endif /* ASM_X86__PAT_H */
diff --git a/include/asm-x86/pci-direct.h b/include/asm-x86/pci-direct.h
index 80c775d9fe20..da42be07b690 100644
--- a/include/asm-x86/pci-direct.h
+++ b/include/asm-x86/pci-direct.h
@@ -1,5 +1,5 @@
-#ifndef ASM_PCI_DIRECT_H
-#define ASM_PCI_DIRECT_H 1
+#ifndef ASM_X86__PCI_DIRECT_H
+#define ASM_X86__PCI_DIRECT_H
 
 #include <linux/types.h>
 
@@ -18,4 +18,4 @@ extern int early_pci_allowed(void);
 extern unsigned int pci_early_dump_regs;
 extern void early_dump_pci_device(u8 bus, u8 slot, u8 func);
 extern void early_dump_pci_devices(void);
-#endif
+#endif /* ASM_X86__PCI_DIRECT_H */
diff --git a/include/asm-x86/pci.h b/include/asm-x86/pci.h
index 2db14cf17db8..602583192991 100644
--- a/include/asm-x86/pci.h
+++ b/include/asm-x86/pci.h
@@ -1,5 +1,5 @@
-#ifndef __x86_PCI_H
-#define __x86_PCI_H
+#ifndef ASM_X86__PCI_H
+#define ASM_X86__PCI_H
 
 #include <linux/mm.h> /* for struct page */
 #include <linux/types.h>
@@ -111,4 +111,4 @@ static inline cpumask_t __pcibus_to_cpumask(struct pci_bus *bus)
 }
 #endif
 
-#endif
+#endif /* ASM_X86__PCI_H */
diff --git a/include/asm-x86/pci_32.h b/include/asm-x86/pci_32.h
index a50d46851285..3f2288207c0c 100644
--- a/include/asm-x86/pci_32.h
+++ b/include/asm-x86/pci_32.h
@@ -1,5 +1,5 @@
-#ifndef __i386_PCI_H
-#define __i386_PCI_H
+#ifndef ASM_X86__PCI_32_H
+#define ASM_X86__PCI_32_H
 
 
 #ifdef __KERNEL__
@@ -31,4 +31,4 @@ struct pci_dev;
 #endif /* __KERNEL__ */
 
 
-#endif /* __i386_PCI_H */
+#endif /* ASM_X86__PCI_32_H */
diff --git a/include/asm-x86/pci_64.h b/include/asm-x86/pci_64.h
index f330234ffa5c..f72e12d5770e 100644
--- a/include/asm-x86/pci_64.h
+++ b/include/asm-x86/pci_64.h
@@ -1,5 +1,5 @@
-#ifndef __x8664_PCI_H
-#define __x8664_PCI_H
+#ifndef ASM_X86__PCI_64_H
+#define ASM_X86__PCI_64_H
 
 #ifdef __KERNEL__
 
@@ -63,4 +63,4 @@ extern void pci_iommu_alloc(void);
 
 #endif /* __KERNEL__ */
 
-#endif /* __x8664_PCI_H */
+#endif /* ASM_X86__PCI_64_H */
diff --git a/include/asm-x86/pda.h b/include/asm-x86/pda.h
index b34e9a7cc80b..80860afffbdb 100644
--- a/include/asm-x86/pda.h
+++ b/include/asm-x86/pda.h
@@ -1,5 +1,5 @@
-#ifndef X86_64_PDA_H
-#define X86_64_PDA_H
+#ifndef ASM_X86__PDA_H
+#define ASM_X86__PDA_H
 
 #ifndef __ASSEMBLY__
 #include <linux/stddef.h>
@@ -134,4 +134,4 @@ do {									\
 
 #define PDA_STACKOFFSET (5*8)
 
-#endif
+#endif /* ASM_X86__PDA_H */
diff --git a/include/asm-x86/percpu.h b/include/asm-x86/percpu.h
index 4e91ee1e37aa..e10a1d0678cf 100644
--- a/include/asm-x86/percpu.h
+++ b/include/asm-x86/percpu.h
@@ -1,5 +1,5 @@
-#ifndef _ASM_X86_PERCPU_H_
-#define _ASM_X86_PERCPU_H_
+#ifndef ASM_X86__PERCPU_H
+#define ASM_X86__PERCPU_H
 
 #ifdef CONFIG_X86_64
 #include <linux/compiler.h>
@@ -182,7 +182,7 @@ do {							\
 	DEFINE_PER_CPU(_type, _name) = _initvalue;			\
 	__typeof__(_type) _name##_early_map[NR_CPUS] __initdata =	\
 				{ [0 ... NR_CPUS-1] = _initvalue };	\
-	__typeof__(_type) *_name##_early_ptr = _name##_early_map
+	__typeof__(_type) *_name##_early_ptr __refdata = _name##_early_map
 
 #define EXPORT_EARLY_PER_CPU_SYMBOL(_name)			\
 	EXPORT_PER_CPU_SYMBOL(_name)
@@ -215,4 +215,4 @@ do {							\
 
 #endif	/* !CONFIG_SMP */
 
-#endif /* _ASM_X86_PERCPU_H_ */
+#endif /* ASM_X86__PERCPU_H */
diff --git a/include/asm-x86/pgalloc.h b/include/asm-x86/pgalloc.h
index d63ea431cb3b..3cd23adedae8 100644
--- a/include/asm-x86/pgalloc.h
+++ b/include/asm-x86/pgalloc.h
@@ -1,5 +1,5 @@
-#ifndef _ASM_X86_PGALLOC_H
-#define _ASM_X86_PGALLOC_H
+#ifndef ASM_X86__PGALLOC_H
+#define ASM_X86__PGALLOC_H
 
 #include <linux/threads.h>
 #include <linux/mm.h>		/* for struct page */
@@ -111,4 +111,4 @@ extern void __pud_free_tlb(struct mmu_gather *tlb, pud_t *pud);
 #endif	/* PAGETABLE_LEVELS > 3 */
 #endif	/* PAGETABLE_LEVELS > 2 */
 
-#endif	/* _ASM_X86_PGALLOC_H */
+#endif /* ASM_X86__PGALLOC_H */
diff --git a/include/asm-x86/pgtable-2level-defs.h b/include/asm-x86/pgtable-2level-defs.h
index 0f71c9f13da4..7ec48f4e5347 100644
--- a/include/asm-x86/pgtable-2level-defs.h
+++ b/include/asm-x86/pgtable-2level-defs.h
@@ -1,5 +1,5 @@
-#ifndef _I386_PGTABLE_2LEVEL_DEFS_H
-#define _I386_PGTABLE_2LEVEL_DEFS_H
+#ifndef ASM_X86__PGTABLE_2LEVEL_DEFS_H
+#define ASM_X86__PGTABLE_2LEVEL_DEFS_H
 
 #define SHARED_KERNEL_PMD	0
 
@@ -17,4 +17,4 @@
 
 #define PTRS_PER_PTE	1024
 
-#endif /* _I386_PGTABLE_2LEVEL_DEFS_H */
+#endif /* ASM_X86__PGTABLE_2LEVEL_DEFS_H */
diff --git a/include/asm-x86/pgtable-2level.h b/include/asm-x86/pgtable-2level.h
index 46bc52c0eae1..60440b191626 100644
--- a/include/asm-x86/pgtable-2level.h
+++ b/include/asm-x86/pgtable-2level.h
@@ -1,5 +1,5 @@
-#ifndef _I386_PGTABLE_2LEVEL_H
-#define _I386_PGTABLE_2LEVEL_H
+#ifndef ASM_X86__PGTABLE_2LEVEL_H
+#define ASM_X86__PGTABLE_2LEVEL_H
 
 #define pte_ERROR(e) \
 	printk("%s:%d: bad pte %08lx.\n", __FILE__, __LINE__, (e).pte_low)
@@ -78,4 +78,4 @@ static inline pte_t native_ptep_get_and_clear(pte_t *xp)
 #define __pte_to_swp_entry(pte)		((swp_entry_t) { (pte).pte_low })
 #define __swp_entry_to_pte(x)		((pte_t) { .pte = (x).val })
 
-#endif /* _I386_PGTABLE_2LEVEL_H */
+#endif /* ASM_X86__PGTABLE_2LEVEL_H */
diff --git a/include/asm-x86/pgtable-3level-defs.h b/include/asm-x86/pgtable-3level-defs.h
index 448ac9516314..c05fe6ff3720 100644
--- a/include/asm-x86/pgtable-3level-defs.h
+++ b/include/asm-x86/pgtable-3level-defs.h
@@ -1,5 +1,5 @@
-#ifndef _I386_PGTABLE_3LEVEL_DEFS_H
-#define _I386_PGTABLE_3LEVEL_DEFS_H
+#ifndef ASM_X86__PGTABLE_3LEVEL_DEFS_H
+#define ASM_X86__PGTABLE_3LEVEL_DEFS_H
 
 #ifdef CONFIG_PARAVIRT
 #define SHARED_KERNEL_PMD	(pv_info.shared_kernel_pmd)
@@ -25,4 +25,4 @@
  */
 #define PTRS_PER_PTE	512
 
-#endif /* _I386_PGTABLE_3LEVEL_DEFS_H */
+#endif /* ASM_X86__PGTABLE_3LEVEL_DEFS_H */
diff --git a/include/asm-x86/pgtable-3level.h b/include/asm-x86/pgtable-3level.h
index 105057f34032..e713bd5f39a6 100644
--- a/include/asm-x86/pgtable-3level.h
+++ b/include/asm-x86/pgtable-3level.h
@@ -1,5 +1,5 @@
-#ifndef _I386_PGTABLE_3LEVEL_H
-#define _I386_PGTABLE_3LEVEL_H
+#ifndef ASM_X86__PGTABLE_3LEVEL_H
+#define ASM_X86__PGTABLE_3LEVEL_H
 
 /*
  * Intel Physical Address Extension (PAE) Mode - three-level page
@@ -179,4 +179,4 @@ static inline unsigned long pte_pfn(pte_t pte)
 #define __pte_to_swp_entry(pte)		((swp_entry_t){ (pte).pte_high })
 #define __swp_entry_to_pte(x)		((pte_t){ { .pte_high = (x).val } })
 
-#endif /* _I386_PGTABLE_3LEVEL_H */
+#endif /* ASM_X86__PGTABLE_3LEVEL_H */
diff --git a/include/asm-x86/pgtable.h b/include/asm-x86/pgtable.h
index 3e5dbc4195f4..57d919a2d79d 100644
--- a/include/asm-x86/pgtable.h
+++ b/include/asm-x86/pgtable.h
@@ -1,5 +1,5 @@
-#ifndef _ASM_X86_PGTABLE_H
-#define _ASM_X86_PGTABLE_H
+#ifndef ASM_X86__PGTABLE_H
+#define ASM_X86__PGTABLE_H
 
 #define FIRST_USER_ADDRESS	0
 
@@ -18,6 +18,7 @@
 #define _PAGE_BIT_UNUSED2	10
 #define _PAGE_BIT_UNUSED3	11
 #define _PAGE_BIT_PAT_LARGE	12	/* On 2MB or 1GB pages */
+#define _PAGE_BIT_SPECIAL	_PAGE_BIT_UNUSED1
 #define _PAGE_BIT_NX           63       /* No execute: only valid after cpuid check */
 
 #define _PAGE_PRESENT	(_AT(pteval_t, 1) << _PAGE_BIT_PRESENT)
@@ -34,6 +35,8 @@
 #define _PAGE_UNUSED3	(_AT(pteval_t, 1) << _PAGE_BIT_UNUSED3)
 #define _PAGE_PAT	(_AT(pteval_t, 1) << _PAGE_BIT_PAT)
 #define _PAGE_PAT_LARGE (_AT(pteval_t, 1) << _PAGE_BIT_PAT_LARGE)
+#define _PAGE_SPECIAL	(_AT(pteval_t, 1) << _PAGE_BIT_SPECIAL)
+#define __HAVE_ARCH_PTE_SPECIAL
 
 #if defined(CONFIG_X86_64) || defined(CONFIG_X86_PAE)
 #define _PAGE_NX	(_AT(pteval_t, 1) << _PAGE_BIT_NX)
@@ -54,7 +57,7 @@
 
 /* Set of bits not changed in pte_modify */
 #define _PAGE_CHG_MASK	(PTE_PFN_MASK | _PAGE_PCD | _PAGE_PWT |		\
-			 _PAGE_ACCESSED | _PAGE_DIRTY)
+			 _PAGE_SPECIAL | _PAGE_ACCESSED | _PAGE_DIRTY)
 
 #define _PAGE_CACHE_MASK	(_PAGE_PCD | _PAGE_PWT)
 #define _PAGE_CACHE_WB		(0)
@@ -180,7 +183,7 @@ static inline int pte_exec(pte_t pte)
 
 static inline int pte_special(pte_t pte)
 {
-	return 0;
+	return pte_val(pte) & _PAGE_SPECIAL;
 }
 
 static inline int pmd_large(pmd_t pte)
@@ -246,7 +249,7 @@ static inline pte_t pte_clrglobal(pte_t pte)
 
 static inline pte_t pte_mkspecial(pte_t pte)
 {
-	return pte;
+	return __pte(pte_val(pte) | _PAGE_SPECIAL);
 }
 
 extern pteval_t __supported_pte_mask;
@@ -310,6 +313,8 @@ static inline void native_pagetable_setup_start(pgd_t *base) {}
 static inline void native_pagetable_setup_done(pgd_t *base) {}
 #endif
 
+extern int arch_report_meminfo(char *page);
+
 #ifdef CONFIG_PARAVIRT
 #include <asm/paravirt.h>
 #else  /* !CONFIG_PARAVIRT */
@@ -518,4 +523,4 @@ static inline void clone_pgd_range(pgd_t *dst, pgd_t *src, int count)
 #include <asm-generic/pgtable.h>
 #endif	/* __ASSEMBLY__ */
 
-#endif	/* _ASM_X86_PGTABLE_H */
+#endif /* ASM_X86__PGTABLE_H */
diff --git a/include/asm-x86/pgtable_32.h b/include/asm-x86/pgtable_32.h
index 5c3b26567a95..45c8235400fe 100644
--- a/include/asm-x86/pgtable_32.h
+++ b/include/asm-x86/pgtable_32.h
@@ -1,5 +1,5 @@
-#ifndef _I386_PGTABLE_H
-#define _I386_PGTABLE_H
+#ifndef ASM_X86__PGTABLE_32_H
+#define ASM_X86__PGTABLE_32_H
 
 
 /*
@@ -31,6 +31,7 @@ static inline void pgtable_cache_init(void) { }
 static inline void check_pgt_cache(void) { }
 void paging_init(void);
 
+extern void set_pmd_pfn(unsigned long, unsigned long, pgprot_t);
 
 /*
  * The Linux x86 paging architecture is 'compile-time dual-mode', it
@@ -186,4 +187,4 @@ do {						\
 #define io_remap_pfn_range(vma, vaddr, pfn, size, prot)	\
 	remap_pfn_range(vma, vaddr, pfn, size, prot)
 
-#endif /* _I386_PGTABLE_H */
+#endif /* ASM_X86__PGTABLE_32_H */
diff --git a/include/asm-x86/pgtable_64.h b/include/asm-x86/pgtable_64.h
index ac5fff4cc58a..e3dcf7a08a0b 100644
--- a/include/asm-x86/pgtable_64.h
+++ b/include/asm-x86/pgtable_64.h
@@ -1,5 +1,5 @@
-#ifndef _X86_64_PGTABLE_H
-#define _X86_64_PGTABLE_H
+#ifndef ASM_X86__PGTABLE_64_H
+#define ASM_X86__PGTABLE_64_H
 
 #include <linux/const.h>
 #ifndef __ASSEMBLY__
@@ -151,7 +151,7 @@ static inline void native_pgd_clear(pgd_t *pgd)
 #define VMALLOC_END      _AC(0xffffe1ffffffffff, UL)
 #define VMEMMAP_START	 _AC(0xffffe20000000000, UL)
 #define MODULES_VADDR    _AC(0xffffffffa0000000, UL)
-#define MODULES_END      _AC(0xfffffffffff00000, UL)
+#define MODULES_END      _AC(0xffffffffff000000, UL)
 #define MODULES_LEN   (MODULES_END - MODULES_VADDR)
 
 #ifndef __ASSEMBLY__
@@ -284,4 +284,4 @@ extern void cleanup_highmap(void);
 #define __HAVE_ARCH_PTE_SAME
 #endif /* !__ASSEMBLY__ */
 
-#endif /* _X86_64_PGTABLE_H */
+#endif /* ASM_X86__PGTABLE_64_H */
diff --git a/include/asm-x86/posix_types_32.h b/include/asm-x86/posix_types_32.h
index b031efda37ec..70cf2bb05939 100644
--- a/include/asm-x86/posix_types_32.h
+++ b/include/asm-x86/posix_types_32.h
@@ -1,5 +1,5 @@
-#ifndef __ARCH_I386_POSIX_TYPES_H
-#define __ARCH_I386_POSIX_TYPES_H
+#ifndef ASM_X86__POSIX_TYPES_32_H
+#define ASM_X86__POSIX_TYPES_32_H
 
 /*
  * This file is generally used by user-level software, so you need to
@@ -82,4 +82,4 @@ do {								\
 
 #endif /* defined(__KERNEL__) */
 
-#endif
+#endif /* ASM_X86__POSIX_TYPES_32_H */
diff --git a/include/asm-x86/posix_types_64.h b/include/asm-x86/posix_types_64.h
index d6624c95854a..388b4e7f4a44 100644
--- a/include/asm-x86/posix_types_64.h
+++ b/include/asm-x86/posix_types_64.h
@@ -1,5 +1,5 @@
-#ifndef _ASM_X86_64_POSIX_TYPES_H
-#define _ASM_X86_64_POSIX_TYPES_H
+#ifndef ASM_X86__POSIX_TYPES_64_H
+#define ASM_X86__POSIX_TYPES_64_H
 
 /*
  * This file is generally used by user-level software, so you need to
@@ -116,4 +116,4 @@ static inline void __FD_ZERO(__kernel_fd_set *p)
 
 #endif /* defined(__KERNEL__) */
 
-#endif
+#endif /* ASM_X86__POSIX_TYPES_64_H */
diff --git a/include/asm-x86/prctl.h b/include/asm-x86/prctl.h
index 52952adef1ca..e7ae34eb4103 100644
--- a/include/asm-x86/prctl.h
+++ b/include/asm-x86/prctl.h
@@ -1,5 +1,5 @@
-#ifndef X86_64_PRCTL_H
-#define X86_64_PRCTL_H 1
+#ifndef ASM_X86__PRCTL_H
+#define ASM_X86__PRCTL_H
 
 #define ARCH_SET_GS 0x1001
 #define ARCH_SET_FS 0x1002
@@ -7,4 +7,4 @@
 #define ARCH_GET_GS 0x1004
 
 
-#endif
+#endif /* ASM_X86__PRCTL_H */
diff --git a/include/asm-x86/processor-cyrix.h b/include/asm-x86/processor-cyrix.h
index 97568ada1f97..1198f2a0e42c 100644
--- a/include/asm-x86/processor-cyrix.h
+++ b/include/asm-x86/processor-cyrix.h
@@ -28,3 +28,11 @@ static inline void setCx86(u8 reg, u8 data)
 	outb(reg, 0x22);
 	outb(data, 0x23);
 }
+
+#define getCx86_old(reg) ({ outb((reg), 0x22); inb(0x23); })
+
+#define setCx86_old(reg, data) do { \
+	outb((reg), 0x22); \
+	outb((data), 0x23); \
+} while (0)
+
diff --git a/include/asm-x86/processor-flags.h b/include/asm-x86/processor-flags.h
index eff2ecd7fff0..dc5f0712f9fa 100644
--- a/include/asm-x86/processor-flags.h
+++ b/include/asm-x86/processor-flags.h
@@ -1,5 +1,5 @@
-#ifndef __ASM_I386_PROCESSOR_FLAGS_H
-#define __ASM_I386_PROCESSOR_FLAGS_H
+#ifndef ASM_X86__PROCESSOR_FLAGS_H
+#define ASM_X86__PROCESSOR_FLAGS_H
 /* Various flags defined: can be included from assembler. */
 
 /*
@@ -59,6 +59,7 @@
 #define X86_CR4_OSFXSR	0x00000200 /* enable fast FPU save and restore */
 #define X86_CR4_OSXMMEXCPT 0x00000400 /* enable unmasked SSE exceptions */
 #define X86_CR4_VMXE	0x00002000 /* enable VMX virtualization */
+#define X86_CR4_OSXSAVE 0x00040000 /* enable xsave and xrestore */
 
 /*
  * x86-64 Task Priority Register, CR8
@@ -96,4 +97,4 @@
 #endif
 #endif
 
-#endif	/* __ASM_I386_PROCESSOR_FLAGS_H */
+#endif /* ASM_X86__PROCESSOR_FLAGS_H */
diff --git a/include/asm-x86/processor.h b/include/asm-x86/processor.h
index ec09649c01f3..c7d35464a4bb 100644
--- a/include/asm-x86/processor.h
+++ b/include/asm-x86/processor.h
@@ -1,5 +1,5 @@
-#ifndef __ASM_X86_PROCESSOR_H
-#define __ASM_X86_PROCESSOR_H
+#ifndef ASM_X86__PROCESSOR_H
+#define ASM_X86__PROCESSOR_H
 
 #include <asm/processor-flags.h>
 
@@ -76,11 +76,11 @@ struct cpuinfo_x86 {
 	int			 x86_tlbsize;
 	__u8			x86_virt_bits;
 	__u8			x86_phys_bits;
+#endif
 	/* CPUID returned core id bits: */
 	__u8			x86_coreid_bits;
 	/* Max extended CPUID function supported: */
 	__u32			extended_cpuid_level;
-#endif
 	/* Maximum supported CPUID level, -1=no CPUID: */
 	int			cpuid_level;
 	__u32			x86_capability[NCAPINTS];
@@ -141,6 +141,8 @@ DECLARE_PER_CPU(struct cpuinfo_x86, cpu_info);
 #define current_cpu_data	boot_cpu_data
 #endif
 
+extern const struct seq_operations cpuinfo_op;
+
 static inline int hlt_works(int cpu)
 {
 #ifdef CONFIG_X86_32
@@ -154,6 +156,8 @@ static inline int hlt_works(int cpu)
 
 extern void cpu_detect(struct cpuinfo_x86 *c);
 
+extern struct pt_regs *idle_regs(struct pt_regs *);
+
 extern void early_cpu_init(void);
 extern void identify_boot_cpu(void);
 extern void identify_secondary_cpu(struct cpuinfo_x86 *);
@@ -162,11 +166,8 @@ extern void init_scattered_cpuid_features(struct cpuinfo_x86 *c);
 extern unsigned int init_intel_cacheinfo(struct cpuinfo_x86 *c);
 extern unsigned short num_cache_leaves;
 
-#if defined(CONFIG_X86_HT) || defined(CONFIG_X86_64)
+extern void detect_extended_topology(struct cpuinfo_x86 *c);
 extern void detect_ht(struct cpuinfo_x86 *c);
-#else
-static inline void detect_ht(struct cpuinfo_x86 *c) {}
-#endif
 
 static inline void native_cpuid(unsigned int *eax, unsigned int *ebx,
 				unsigned int *ecx, unsigned int *edx)
@@ -323,7 +324,12 @@ struct i387_fxsave_struct {
 	/* 16*16 bytes for each XMM-reg = 256 bytes:			*/
 	u32			xmm_space[64];
 
-	u32			padding[24];
+	u32			padding[12];
+
+	union {
+		u32		padding1[12];
+		u32		sw_reserved[12];
+	};
 
 } __attribute__((aligned(16)));
 
@@ -347,10 +353,23 @@ struct i387_soft_struct {
 	u32			entry_eip;
 };
 
+struct xsave_hdr_struct {
+	u64 xstate_bv;
+	u64 reserved1[2];
+	u64 reserved2[5];
+} __attribute__((packed));
+
+struct xsave_struct {
+	struct i387_fxsave_struct i387;
+	struct xsave_hdr_struct xsave_hdr;
+	/* new processor state extensions will go here */
+} __attribute__ ((packed, aligned (64)));
+
 union thread_xstate {
 	struct i387_fsave_struct	fsave;
 	struct i387_fxsave_struct	fxsave;
 	struct i387_soft_struct		soft;
+	struct xsave_struct		xsave;
 };
 
 #ifdef CONFIG_X86_64
@@ -734,6 +753,29 @@ extern unsigned long		boot_option_idle_override;
 extern unsigned long		idle_halt;
 extern unsigned long		idle_nomwait;
 
+/*
+ * on systems with caches, caches must be flashed as the absolute
+ * last instruction before going into a suspended halt.  Otherwise,
+ * dirty data can linger in the cache and become stale on resume,
+ * leading to strange errors.
+ *
+ * perform a variety of operations to guarantee that the compiler
+ * will not reorder instructions.  wbinvd itself is serializing
+ * so the processor will not reorder.
+ *
+ * Systems without cache can just go into halt.
+ */
+static inline void wbinvd_halt(void)
+{
+	mb();
+	/* check for clflush to determine if wbinvd is legal */
+	if (cpu_has_clflush)
+		asm volatile("cli; wbinvd; 1: hlt; jmp 1b" : : : "memory");
+	else
+		while (1)
+			halt();
+}
+
 extern void enable_sep_cpu(void);
 extern int sysenter_setup(void);
 
@@ -926,4 +968,4 @@ extern void start_thread(struct pt_regs *regs, unsigned long new_ip,
 extern int get_tsc_mode(unsigned long adr);
 extern int set_tsc_mode(unsigned int val);
 
-#endif
+#endif /* ASM_X86__PROCESSOR_H */
diff --git a/include/asm-x86/proto.h b/include/asm-x86/proto.h
index 3dd458c385c0..6e89e8b4de0e 100644
--- a/include/asm-x86/proto.h
+++ b/include/asm-x86/proto.h
@@ -1,5 +1,5 @@
-#ifndef _ASM_X8664_PROTO_H
-#define _ASM_X8664_PROTO_H 1
+#ifndef ASM_X86__PROTO_H
+#define ASM_X86__PROTO_H
 
 #include <asm/ldt.h>
 
@@ -29,4 +29,4 @@ long do_arch_prctl(struct task_struct *task, int code, unsigned long addr);
 #define round_up(x, y) (((x) + (y) - 1) & ~((y) - 1))
 #define round_down(x, y) ((x) & ~((y) - 1))
 
-#endif
+#endif /* ASM_X86__PROTO_H */
diff --git a/include/asm-x86/ptrace-abi.h b/include/asm-x86/ptrace-abi.h
index 3397817eded9..4298b8882a78 100644
--- a/include/asm-x86/ptrace-abi.h
+++ b/include/asm-x86/ptrace-abi.h
@@ -1,5 +1,5 @@
-#ifndef _ASM_X86_PTRACE_ABI_H
-#define _ASM_X86_PTRACE_ABI_H
+#ifndef ASM_X86__PTRACE_ABI_H
+#define ASM_X86__PTRACE_ABI_H
 
 #ifdef __i386__
 
@@ -142,4 +142,4 @@ struct ptrace_bts_config {
 */
 #endif /* CONFIG_X86_PTRACE_BTS */
 
-#endif
+#endif /* ASM_X86__PTRACE_ABI_H */
diff --git a/include/asm-x86/ptrace.h b/include/asm-x86/ptrace.h
index 5e0c48d24b1a..33a034be8b5c 100644
--- a/include/asm-x86/ptrace.h
+++ b/include/asm-x86/ptrace.h
@@ -1,5 +1,5 @@
-#ifndef _ASM_X86_PTRACE_H
-#define _ASM_X86_PTRACE_H
+#ifndef ASM_X86__PTRACE_H
+#define ASM_X86__PTRACE_H
 
 #include <linux/compiler.h>	/* For __user */
 #include <asm/ptrace-abi.h>
@@ -182,6 +182,9 @@ extern void send_sigtrap(struct task_struct *tsk, struct pt_regs *regs,
 void signal_fault(struct pt_regs *regs, void __user *frame, char *where);
 #endif
 
+extern long syscall_trace_enter(struct pt_regs *);
+extern void syscall_trace_leave(struct pt_regs *);
+
 static inline unsigned long regs_return_value(struct pt_regs *regs)
 {
 	return regs->ax;
@@ -273,4 +276,4 @@ extern int do_set_thread_area(struct task_struct *p, int idx,
 
 #endif /* !__ASSEMBLY__ */
 
-#endif
+#endif /* ASM_X86__PTRACE_H */
diff --git a/include/asm-x86/pvclock-abi.h b/include/asm-x86/pvclock-abi.h
index 6857f840b243..edb3b4ecfc81 100644
--- a/include/asm-x86/pvclock-abi.h
+++ b/include/asm-x86/pvclock-abi.h
@@ -1,5 +1,5 @@
-#ifndef _ASM_X86_PVCLOCK_ABI_H_
-#define _ASM_X86_PVCLOCK_ABI_H_
+#ifndef ASM_X86__PVCLOCK_ABI_H
+#define ASM_X86__PVCLOCK_ABI_H
 #ifndef __ASSEMBLY__
 
 /*
@@ -39,4 +39,4 @@ struct pvclock_wall_clock {
 } __attribute__((__packed__));
 
 #endif /* __ASSEMBLY__ */
-#endif /* _ASM_X86_PVCLOCK_ABI_H_ */
+#endif /* ASM_X86__PVCLOCK_ABI_H */
diff --git a/include/asm-x86/pvclock.h b/include/asm-x86/pvclock.h
index 85b1bba8e0a3..1a38f6834800 100644
--- a/include/asm-x86/pvclock.h
+++ b/include/asm-x86/pvclock.h
@@ -1,5 +1,5 @@
-#ifndef _ASM_X86_PVCLOCK_H_
-#define _ASM_X86_PVCLOCK_H_
+#ifndef ASM_X86__PVCLOCK_H
+#define ASM_X86__PVCLOCK_H
 
 #include <linux/clocksource.h>
 #include <asm/pvclock-abi.h>
@@ -10,4 +10,4 @@ void pvclock_read_wallclock(struct pvclock_wall_clock *wall,
 			    struct pvclock_vcpu_time_info *vcpu,
 			    struct timespec *ts);
 
-#endif /* _ASM_X86_PVCLOCK_H_ */
+#endif /* ASM_X86__PVCLOCK_H */
diff --git a/include/asm-x86/reboot.h b/include/asm-x86/reboot.h
index 206f355786dc..1c2f0ce9e31e 100644
--- a/include/asm-x86/reboot.h
+++ b/include/asm-x86/reboot.h
@@ -1,5 +1,5 @@
-#ifndef _ASM_REBOOT_H
-#define _ASM_REBOOT_H
+#ifndef ASM_X86__REBOOT_H
+#define ASM_X86__REBOOT_H
 
 struct pt_regs;
 
@@ -18,4 +18,4 @@ void native_machine_crash_shutdown(struct pt_regs *regs);
 void native_machine_shutdown(void);
 void machine_real_restart(const unsigned char *code, int length);
 
-#endif	/* _ASM_REBOOT_H */
+#endif /* ASM_X86__REBOOT_H */
diff --git a/include/asm-x86/reboot_fixups.h b/include/asm-x86/reboot_fixups.h
index 0cb7d87c2b68..2c2987d97570 100644
--- a/include/asm-x86/reboot_fixups.h
+++ b/include/asm-x86/reboot_fixups.h
@@ -1,6 +1,6 @@
-#ifndef _LINUX_REBOOT_FIXUPS_H
-#define _LINUX_REBOOT_FIXUPS_H
+#ifndef ASM_X86__REBOOT_FIXUPS_H
+#define ASM_X86__REBOOT_FIXUPS_H
 
 extern void mach_reboot_fixups(void);
 
-#endif /* _LINUX_REBOOT_FIXUPS_H */
+#endif /* ASM_X86__REBOOT_FIXUPS_H */
diff --git a/include/asm-x86/required-features.h b/include/asm-x86/required-features.h
index adec887dd7cd..a01c4e376331 100644
--- a/include/asm-x86/required-features.h
+++ b/include/asm-x86/required-features.h
@@ -1,5 +1,5 @@
-#ifndef _ASM_REQUIRED_FEATURES_H
-#define _ASM_REQUIRED_FEATURES_H 1
+#ifndef ASM_X86__REQUIRED_FEATURES_H
+#define ASM_X86__REQUIRED_FEATURES_H
 
 /* Define minimum CPUID feature set for kernel These bits are checked
    really early to actually display a visible error message before the
@@ -41,6 +41,12 @@
 # define NEED_3DNOW	0
 #endif
 
+#if defined(CONFIG_X86_P6_NOP) || defined(CONFIG_X86_64)
+# define NEED_NOPL	(1<<(X86_FEATURE_NOPL & 31))
+#else
+# define NEED_NOPL	0
+#endif
+
 #ifdef CONFIG_X86_64
 #define NEED_PSE	0
 #define NEED_MSR	(1<<(X86_FEATURE_MSR & 31))
@@ -67,10 +73,10 @@
 #define REQUIRED_MASK1	(NEED_LM|NEED_3DNOW)
 
 #define REQUIRED_MASK2	0
-#define REQUIRED_MASK3	0
+#define REQUIRED_MASK3	(NEED_NOPL)
 #define REQUIRED_MASK4	0
 #define REQUIRED_MASK5	0
 #define REQUIRED_MASK6	0
 #define REQUIRED_MASK7	0
 
-#endif
+#endif /* ASM_X86__REQUIRED_FEATURES_H */
diff --git a/include/asm-x86/resume-trace.h b/include/asm-x86/resume-trace.h
index 8d9f0b41ee86..519a8ecbfc95 100644
--- a/include/asm-x86/resume-trace.h
+++ b/include/asm-x86/resume-trace.h
@@ -1,5 +1,5 @@
-#ifndef _ASM_X86_RESUME_TRACE_H
-#define _ASM_X86_RESUME_TRACE_H
+#ifndef ASM_X86__RESUME_TRACE_H
+#define ASM_X86__RESUME_TRACE_H
 
 #include <asm/asm.h>
 
@@ -18,4 +18,4 @@ do {								\
 	}							\
 } while (0)
 
-#endif
+#endif /* ASM_X86__RESUME_TRACE_H */
diff --git a/include/asm-x86/rio.h b/include/asm-x86/rio.h
index c9448bd8968f..5e1256bdee83 100644
--- a/include/asm-x86/rio.h
+++ b/include/asm-x86/rio.h
@@ -5,8 +5,8 @@
  * Author: Laurent Vivier <Laurent.Vivier@bull.net>
  */
 
-#ifndef __ASM_RIO_H
-#define __ASM_RIO_H
+#ifndef ASM_X86__RIO_H
+#define ASM_X86__RIO_H
 
 #define RIO_TABLE_VERSION	3
 
@@ -60,4 +60,4 @@ enum {
 	ALT_CALGARY	= 5,	/* Second Planar Calgary      */
 };
 
-#endif /* __ASM_RIO_H */
+#endif /* ASM_X86__RIO_H */
diff --git a/include/asm-x86/rwlock.h b/include/asm-x86/rwlock.h
index 6a8c0d645108..48a3109e1a7d 100644
--- a/include/asm-x86/rwlock.h
+++ b/include/asm-x86/rwlock.h
@@ -1,8 +1,8 @@
-#ifndef _ASM_X86_RWLOCK_H
-#define _ASM_X86_RWLOCK_H
+#ifndef ASM_X86__RWLOCK_H
+#define ASM_X86__RWLOCK_H
 
 #define RW_LOCK_BIAS		 0x01000000
 
 /* Actual code is in asm/spinlock.h or in arch/x86/lib/rwlock.S */
 
-#endif /* _ASM_X86_RWLOCK_H */
+#endif /* ASM_X86__RWLOCK_H */
diff --git a/include/asm-x86/rwsem.h b/include/asm-x86/rwsem.h
index 750f2a3542b3..3ff3015b71a8 100644
--- a/include/asm-x86/rwsem.h
+++ b/include/asm-x86/rwsem.h
@@ -29,8 +29,8 @@
  * front, then they'll all be woken up, but no other readers will be.
  */
 
-#ifndef _I386_RWSEM_H
-#define _I386_RWSEM_H
+#ifndef ASM_X86__RWSEM_H
+#define ASM_X86__RWSEM_H
 
 #ifndef _LINUX_RWSEM_H
 #error "please don't include asm/rwsem.h directly, use linux/rwsem.h instead"
@@ -262,4 +262,4 @@ static inline int rwsem_is_locked(struct rw_semaphore *sem)
 }
 
 #endif /* __KERNEL__ */
-#endif /* _I386_RWSEM_H */
+#endif /* ASM_X86__RWSEM_H */
diff --git a/include/asm-x86/scatterlist.h b/include/asm-x86/scatterlist.h
index c0432061f81a..ee48f880005d 100644
--- a/include/asm-x86/scatterlist.h
+++ b/include/asm-x86/scatterlist.h
@@ -1,5 +1,5 @@
-#ifndef _ASM_X86_SCATTERLIST_H
-#define _ASM_X86_SCATTERLIST_H
+#ifndef ASM_X86__SCATTERLIST_H
+#define ASM_X86__SCATTERLIST_H
 
 #include <asm/types.h>
 
@@ -30,4 +30,4 @@ struct scatterlist {
 # define sg_dma_len(sg)		((sg)->dma_length)
 #endif
 
-#endif
+#endif /* ASM_X86__SCATTERLIST_H */
diff --git a/include/asm-x86/seccomp_32.h b/include/asm-x86/seccomp_32.h
index 36e71c5f306f..cf9ab2dbcef1 100644
--- a/include/asm-x86/seccomp_32.h
+++ b/include/asm-x86/seccomp_32.h
@@ -1,5 +1,5 @@
-#ifndef _ASM_SECCOMP_H
-#define _ASM_SECCOMP_H
+#ifndef ASM_X86__SECCOMP_32_H
+#define ASM_X86__SECCOMP_32_H
 
 #include <linux/thread_info.h>
 
@@ -14,4 +14,4 @@
 #define __NR_seccomp_exit __NR_exit
 #define __NR_seccomp_sigreturn __NR_sigreturn
 
-#endif /* _ASM_SECCOMP_H */
+#endif /* ASM_X86__SECCOMP_32_H */
diff --git a/include/asm-x86/seccomp_64.h b/include/asm-x86/seccomp_64.h
index 76cfe69aa63c..03274cea751f 100644
--- a/include/asm-x86/seccomp_64.h
+++ b/include/asm-x86/seccomp_64.h
@@ -1,5 +1,5 @@
-#ifndef _ASM_SECCOMP_H
-#define _ASM_SECCOMP_H
+#ifndef ASM_X86__SECCOMP_64_H
+#define ASM_X86__SECCOMP_64_H
 
 #include <linux/thread_info.h>
 
@@ -22,4 +22,4 @@
 #define __NR_seccomp_exit_32 __NR_ia32_exit
 #define __NR_seccomp_sigreturn_32 __NR_ia32_sigreturn
 
-#endif /* _ASM_SECCOMP_H */
+#endif /* ASM_X86__SECCOMP_64_H */
diff --git a/include/asm-x86/segment.h b/include/asm-x86/segment.h
index 646452ea9ea3..ea5f0a8686f7 100644
--- a/include/asm-x86/segment.h
+++ b/include/asm-x86/segment.h
@@ -1,5 +1,5 @@
-#ifndef _ASM_X86_SEGMENT_H_
-#define _ASM_X86_SEGMENT_H_
+#ifndef ASM_X86__SEGMENT_H
+#define ASM_X86__SEGMENT_H
 
 /* Constructor for a conventional segment GDT (or LDT) entry */
 /* This is a macro so it can be used in initializers */
@@ -212,4 +212,4 @@ extern const char early_idt_handlers[NUM_EXCEPTION_VECTORS][10];
 #endif
 #endif
 
-#endif
+#endif /* ASM_X86__SEGMENT_H */
diff --git a/include/asm-x86/sembuf.h b/include/asm-x86/sembuf.h
index ee50c801f7b7..81f06b7e5a3f 100644
--- a/include/asm-x86/sembuf.h
+++ b/include/asm-x86/sembuf.h
@@ -1,5 +1,5 @@
-#ifndef _ASM_X86_SEMBUF_H
-#define _ASM_X86_SEMBUF_H
+#ifndef ASM_X86__SEMBUF_H
+#define ASM_X86__SEMBUF_H
 
 /*
  * The semid64_ds structure for x86 architecture.
@@ -21,4 +21,4 @@ struct semid64_ds {
 	unsigned long	__unused4;
 };
 
-#endif /* _ASM_X86_SEMBUF_H */
+#endif /* ASM_X86__SEMBUF_H */
diff --git a/include/asm-x86/serial.h b/include/asm-x86/serial.h
index 628c801535ea..303660b671e5 100644
--- a/include/asm-x86/serial.h
+++ b/include/asm-x86/serial.h
@@ -1,5 +1,5 @@
-#ifndef _ASM_X86_SERIAL_H
-#define _ASM_X86_SERIAL_H
+#ifndef ASM_X86__SERIAL_H
+#define ASM_X86__SERIAL_H
 
 /*
  * This assumes you have a 1.8432 MHz clock for your UART.
@@ -26,4 +26,4 @@
 	{ 0, BASE_BAUD, 0x3E8, 4, STD_COM_FLAGS },	/* ttyS2 */	\
 	{ 0, BASE_BAUD, 0x2E8, 3, STD_COM4_FLAGS },	/* ttyS3 */
 
-#endif /* _ASM_X86_SERIAL_H */
+#endif /* ASM_X86__SERIAL_H */
diff --git a/include/asm-x86/setup.h b/include/asm-x86/setup.h
index a07c6f1c01e1..11b6cc14b289 100644
--- a/include/asm-x86/setup.h
+++ b/include/asm-x86/setup.h
@@ -1,5 +1,5 @@
-#ifndef _ASM_X86_SETUP_H
-#define _ASM_X86_SETUP_H
+#ifndef ASM_X86__SETUP_H
+#define ASM_X86__SETUP_H
 
 #define COMMAND_LINE_SIZE 2048
 
@@ -38,9 +38,11 @@ struct x86_quirks {
 	void (*mpc_oem_pci_bus)(struct mpc_config_bus *m);
 	void (*smp_read_mpc_oem)(struct mp_config_oemtable *oemtable,
                                     unsigned short oemsize);
+	int (*setup_ioapic_ids)(void);
 };
 
 extern struct x86_quirks *x86_quirks;
+extern unsigned long saved_video_mode;
 
 #ifndef CONFIG_PARAVIRT
 #define paravirt_post_allocator_init()	do {} while (0)
@@ -100,4 +102,4 @@ void __init x86_64_start_reservations(char *real_mode_data);
 #endif /* __ASSEMBLY__ */
 #endif  /*  __KERNEL__  */
 
-#endif /* _ASM_X86_SETUP_H */
+#endif /* ASM_X86__SETUP_H */
diff --git a/include/asm-x86/shmbuf.h b/include/asm-x86/shmbuf.h
index b51413b74971..f51aec2298e9 100644
--- a/include/asm-x86/shmbuf.h
+++ b/include/asm-x86/shmbuf.h
@@ -1,5 +1,5 @@
-#ifndef _ASM_X86_SHMBUF_H
-#define _ASM_X86_SHMBUF_H
+#ifndef ASM_X86__SHMBUF_H
+#define ASM_X86__SHMBUF_H
 
 /*
  * The shmid64_ds structure for x86 architecture.
@@ -48,4 +48,4 @@ struct shminfo64 {
 	unsigned long	__unused4;
 };
 
-#endif /* _ASM_X86_SHMBUF_H */
+#endif /* ASM_X86__SHMBUF_H */
diff --git a/include/asm-x86/shmparam.h b/include/asm-x86/shmparam.h
index 0880cf0917b9..a83a1fd96a0e 100644
--- a/include/asm-x86/shmparam.h
+++ b/include/asm-x86/shmparam.h
@@ -1,6 +1,6 @@
-#ifndef _ASM_X86_SHMPARAM_H
-#define _ASM_X86_SHMPARAM_H
+#ifndef ASM_X86__SHMPARAM_H
+#define ASM_X86__SHMPARAM_H
 
 #define SHMLBA PAGE_SIZE	 /* attach addr a multiple of this */
 
-#endif /* _ASM_X86_SHMPARAM_H */
+#endif /* ASM_X86__SHMPARAM_H */
diff --git a/include/asm-x86/sigcontext.h b/include/asm-x86/sigcontext.h
index 2f9c884d2c0f..ee813f4fe5d5 100644
--- a/include/asm-x86/sigcontext.h
+++ b/include/asm-x86/sigcontext.h
@@ -1,9 +1,43 @@
-#ifndef _ASM_X86_SIGCONTEXT_H
-#define _ASM_X86_SIGCONTEXT_H
+#ifndef ASM_X86__SIGCONTEXT_H
+#define ASM_X86__SIGCONTEXT_H
 
 #include <linux/compiler.h>
 #include <asm/types.h>
 
+#define FP_XSTATE_MAGIC1	0x46505853U
+#define FP_XSTATE_MAGIC2	0x46505845U
+#define FP_XSTATE_MAGIC2_SIZE	sizeof(FP_XSTATE_MAGIC2)
+
+/*
+ * bytes 464..511 in the current 512byte layout of fxsave/fxrstor frame
+ * are reserved for SW usage. On cpu's supporting xsave/xrstor, these bytes
+ * are used to extended the fpstate pointer in the sigcontext, which now
+ * includes the extended state information along with fpstate information.
+ *
+ * Presence of FP_XSTATE_MAGIC1 at the beginning of this SW reserved
+ * area and FP_XSTATE_MAGIC2 at the end of memory layout
+ * (extended_size - FP_XSTATE_MAGIC2_SIZE) indicates the presence of the
+ * extended state information in the memory layout pointed by the fpstate
+ * pointer in sigcontext.
+ */
+struct _fpx_sw_bytes {
+	__u32 magic1;		/* FP_XSTATE_MAGIC1 */
+	__u32 extended_size;	/* total size of the layout referred by
+				 * fpstate pointer in the sigcontext.
+				 */
+	__u64 xstate_bv;
+				/* feature bit mask (including fp/sse/extended
+				 * state) that is present in the memory
+				 * layout.
+				 */
+	__u32 xstate_size;	/* actual xsave state size, based on the
+				 * features saved in the layout.
+				 * 'extended_size' will be greater than
+				 * 'xstate_size'.
+				 */
+	__u32 padding[7];	/*  for future use. */
+};
+
 #ifdef __i386__
 /*
  * As documented in the iBCS2 standard..
@@ -53,7 +87,13 @@ struct _fpstate {
 	unsigned long	reserved;
 	struct _fpxreg	_fxsr_st[8];	/* FXSR FPU reg data is ignored */
 	struct _xmmreg	_xmm[8];
-	unsigned long	padding[56];
+	unsigned long	padding1[44];
+
+	union {
+		unsigned long	padding2[12];
+		struct _fpx_sw_bytes sw_reserved; /* represents the extended
+						   * state info */
+	};
 };
 
 #define X86_FXSR_MAGIC		0x0000
@@ -79,7 +119,15 @@ struct sigcontext {
 	unsigned long flags;
 	unsigned long sp_at_signal;
 	unsigned short ss, __ssh;
-	struct _fpstate __user *fpstate;
+
+	/*
+	 * fpstate is really (struct _fpstate *) or (struct _xstate *)
+	 * depending on the FP_XSTATE_MAGIC1 encoded in the SW reserved
+	 * bytes of (struct _fpstate) and FP_XSTATE_MAGIC2 present at the end
+	 * of extended memory layout. See comments at the defintion of
+	 * (struct _fpx_sw_bytes)
+	 */
+	void __user *fpstate;		/* zero when no FPU/extended context */
 	unsigned long oldmask;
 	unsigned long cr2;
 };
@@ -130,7 +178,12 @@ struct _fpstate {
 	__u32	mxcsr_mask;
 	__u32	st_space[32];	/* 8*16 bytes for each FP-reg */
 	__u32	xmm_space[64];	/* 16*16 bytes for each XMM-reg  */
-	__u32	reserved2[24];
+	__u32	reserved2[12];
+	union {
+		__u32	reserved3[12];
+		struct _fpx_sw_bytes sw_reserved; /* represents the extended
+						   * state information */
+	};
 };
 
 #ifdef __KERNEL__
@@ -161,7 +214,15 @@ struct sigcontext {
 	unsigned long trapno;
 	unsigned long oldmask;
 	unsigned long cr2;
-	struct _fpstate __user *fpstate;	/* zero when no FPU context */
+
+	/*
+	 * fpstate is really (struct _fpstate *) or (struct _xstate *)
+	 * depending on the FP_XSTATE_MAGIC1 encoded in the SW reserved
+	 * bytes of (struct _fpstate) and FP_XSTATE_MAGIC2 present at the end
+	 * of extended memory layout. See comments at the defintion of
+	 * (struct _fpx_sw_bytes)
+	 */
+	void __user *fpstate;		/* zero when no FPU/extended context */
 	unsigned long reserved1[8];
 };
 #else /* __KERNEL__ */
@@ -202,4 +263,22 @@ struct sigcontext {
 
 #endif /* !__i386__ */
 
-#endif
+struct _xsave_hdr {
+	__u64 xstate_bv;
+	__u64 reserved1[2];
+	__u64 reserved2[5];
+};
+
+/*
+ * Extended state pointed by the fpstate pointer in the sigcontext.
+ * In addition to the fpstate, information encoded in the xstate_hdr
+ * indicates the presence of other extended state information
+ * supported by the processor and OS.
+ */
+struct _xstate {
+	struct _fpstate fpstate;
+	struct _xsave_hdr xstate_hdr;
+	/* new processor state extensions go here */
+};
+
+#endif /* ASM_X86__SIGCONTEXT_H */
diff --git a/include/asm-x86/sigcontext32.h b/include/asm-x86/sigcontext32.h
index 57a9686fb491..8c347032c2f2 100644
--- a/include/asm-x86/sigcontext32.h
+++ b/include/asm-x86/sigcontext32.h
@@ -1,5 +1,5 @@
-#ifndef _SIGCONTEXT32_H
-#define _SIGCONTEXT32_H 1
+#ifndef ASM_X86__SIGCONTEXT32_H
+#define ASM_X86__SIGCONTEXT32_H
 
 /* signal context for 32bit programs. */
 
@@ -40,7 +40,11 @@ struct _fpstate_ia32 {
 	__u32	reserved;
 	struct _fpxreg	_fxsr_st[8];
 	struct _xmmreg	_xmm[8];	/* It's actually 16 */
-	__u32	padding[56];
+	__u32	padding[44];
+	union {
+		__u32 padding2[12];
+		struct _fpx_sw_bytes sw_reserved;
+	};
 };
 
 struct sigcontext_ia32 {
@@ -68,4 +72,4 @@ struct sigcontext_ia32 {
        unsigned int cr2;
 };
 
-#endif
+#endif /* ASM_X86__SIGCONTEXT32_H */
diff --git a/include/asm-x86/siginfo.h b/include/asm-x86/siginfo.h
index a477bea0c2a1..808bdfb2958c 100644
--- a/include/asm-x86/siginfo.h
+++ b/include/asm-x86/siginfo.h
@@ -1,5 +1,5 @@
-#ifndef _ASM_X86_SIGINFO_H
-#define _ASM_X86_SIGINFO_H
+#ifndef ASM_X86__SIGINFO_H
+#define ASM_X86__SIGINFO_H
 
 #ifdef __x86_64__
 # define __ARCH_SI_PREAMBLE_SIZE	(4 * sizeof(int))
@@ -7,4 +7,4 @@
 
 #include <asm-generic/siginfo.h>
 
-#endif
+#endif /* ASM_X86__SIGINFO_H */
diff --git a/include/asm-x86/signal.h b/include/asm-x86/signal.h
index 6dac49364e95..65acc82d267a 100644
--- a/include/asm-x86/signal.h
+++ b/include/asm-x86/signal.h
@@ -1,5 +1,5 @@
-#ifndef _ASM_X86_SIGNAL_H
-#define _ASM_X86_SIGNAL_H
+#ifndef ASM_X86__SIGNAL_H
+#define ASM_X86__SIGNAL_H
 
 #ifndef __ASSEMBLY__
 #include <linux/types.h>
@@ -140,6 +140,9 @@ struct sigaction {
 struct k_sigaction {
 	struct sigaction sa;
 };
+
+extern void do_notify_resume(struct pt_regs *, void *, __u32);
+
 # else /* __KERNEL__ */
 /* Here we must cater to libcs that poke about in kernel headers.  */
 
@@ -256,4 +259,4 @@ struct pt_regs;
 #endif /* __KERNEL__ */
 #endif /* __ASSEMBLY__ */
 
-#endif
+#endif /* ASM_X86__SIGNAL_H */
diff --git a/include/asm-x86/smp.h b/include/asm-x86/smp.h
index 3c877f74f279..29324c103341 100644
--- a/include/asm-x86/smp.h
+++ b/include/asm-x86/smp.h
@@ -1,5 +1,5 @@
-#ifndef _ASM_X86_SMP_H_
-#define _ASM_X86_SMP_H_
+#ifndef ASM_X86__SMP_H
+#define ASM_X86__SMP_H
 #ifndef __ASSEMBLY__
 #include <linux/cpumask.h>
 #include <linux/init.h>
@@ -34,6 +34,9 @@ extern cpumask_t cpu_initialized;
 DECLARE_PER_CPU(cpumask_t, cpu_sibling_map);
 DECLARE_PER_CPU(cpumask_t, cpu_core_map);
 DECLARE_PER_CPU(u16, cpu_llc_id);
+#ifdef CONFIG_X86_32
+DECLARE_PER_CPU(int, cpu_number);
+#endif
 
 DECLARE_EARLY_PER_CPU(u16, x86_cpu_to_apicid);
 DECLARE_EARLY_PER_CPU(u16, x86_bios_cpu_apicid);
@@ -142,7 +145,6 @@ extern unsigned disabled_cpus __cpuinitdata;
  * from the initial startup. We map APIC_BASE very early in page_setup(),
  * so this is correct in the x86 case.
  */
-DECLARE_PER_CPU(int, cpu_number);
 #define raw_smp_processor_id() (x86_read_percpu(cpu_number))
 extern int safe_smp_processor_id(void);
 
@@ -165,30 +167,33 @@ extern int safe_smp_processor_id(void);
 
 #ifdef CONFIG_X86_LOCAL_APIC
 
+#ifndef CONFIG_X86_64
 static inline int logical_smp_processor_id(void)
 {
 	/* we don't want to mark this access volatile - bad code generation */
 	return GET_APIC_LOGICAL_ID(*(u32 *)(APIC_BASE + APIC_LDR));
 }
 
-#ifndef CONFIG_X86_64
+#include <mach_apicdef.h>
 static inline unsigned int read_apic_id(void)
 {
-	return *(u32 *)(APIC_BASE + APIC_ID);
+	unsigned int reg;
+
+	reg = *(u32 *)(APIC_BASE + APIC_ID);
+
+	return GET_APIC_ID(reg);
 }
-#else
-extern unsigned int read_apic_id(void);
 #endif
 
 
-# ifdef APIC_DEFINITION
+# if defined(APIC_DEFINITION) || defined(CONFIG_X86_64)
 extern int hard_smp_processor_id(void);
 # else
-#  include <mach_apicdef.h>
+#include <mach_apicdef.h>
 static inline int hard_smp_processor_id(void)
 {
 	/* we don't want to mark this access volatile - bad code generation */
-	return GET_APIC_ID(read_apic_id());
+	return read_apic_id();
 }
 # endif /* APIC_DEFINITION */
 
@@ -205,4 +210,4 @@ extern void cpu_uninit(void);
 #endif
 
 #endif /* __ASSEMBLY__ */
-#endif
+#endif /* ASM_X86__SMP_H */
diff --git a/include/asm-x86/socket.h b/include/asm-x86/socket.h
index 80af9c4ccad7..db73274c83c3 100644
--- a/include/asm-x86/socket.h
+++ b/include/asm-x86/socket.h
@@ -1,5 +1,5 @@
-#ifndef _ASM_SOCKET_H
-#define _ASM_SOCKET_H
+#ifndef ASM_X86__SOCKET_H
+#define ASM_X86__SOCKET_H
 
 #include <asm/sockios.h>
 
@@ -54,4 +54,4 @@
 
 #define SO_MARK			36
 
-#endif /* _ASM_SOCKET_H */
+#endif /* ASM_X86__SOCKET_H */
diff --git a/include/asm-x86/sockios.h b/include/asm-x86/sockios.h
index 49cc72b5d3c9..a006704fdc84 100644
--- a/include/asm-x86/sockios.h
+++ b/include/asm-x86/sockios.h
@@ -1,5 +1,5 @@
-#ifndef _ASM_X86_SOCKIOS_H
-#define _ASM_X86_SOCKIOS_H
+#ifndef ASM_X86__SOCKIOS_H
+#define ASM_X86__SOCKIOS_H
 
 /* Socket-level I/O control calls. */
 #define FIOSETOWN	0x8901
@@ -10,4 +10,4 @@
 #define SIOCGSTAMP	0x8906		/* Get stamp (timeval) */
 #define SIOCGSTAMPNS	0x8907		/* Get stamp (timespec) */
 
-#endif /* _ASM_X86_SOCKIOS_H */
+#endif /* ASM_X86__SOCKIOS_H */
diff --git a/include/asm-x86/sparsemem.h b/include/asm-x86/sparsemem.h
index 9bd48b0a534b..38f8e6bc3186 100644
--- a/include/asm-x86/sparsemem.h
+++ b/include/asm-x86/sparsemem.h
@@ -1,5 +1,5 @@
-#ifndef _ASM_X86_SPARSEMEM_H
-#define _ASM_X86_SPARSEMEM_H
+#ifndef ASM_X86__SPARSEMEM_H
+#define ASM_X86__SPARSEMEM_H
 
 #ifdef CONFIG_SPARSEMEM
 /*
@@ -31,4 +31,4 @@
 #endif
 
 #endif /* CONFIG_SPARSEMEM */
-#endif
+#endif /* ASM_X86__SPARSEMEM_H */
diff --git a/include/asm-x86/spinlock.h b/include/asm-x86/spinlock.h
index 4f9a9861799a..5d08fa280fdf 100644
--- a/include/asm-x86/spinlock.h
+++ b/include/asm-x86/spinlock.h
@@ -1,5 +1,5 @@
-#ifndef _X86_SPINLOCK_H_
-#define _X86_SPINLOCK_H_
+#ifndef ASM_X86__SPINLOCK_H
+#define ASM_X86__SPINLOCK_H
 
 #include <asm/atomic.h>
 #include <asm/rwlock.h>
@@ -65,7 +65,7 @@ static inline int __ticket_spin_is_contended(raw_spinlock_t *lock)
 {
 	int tmp = ACCESS_ONCE(lock->slock);
 
-	return (((tmp >> 8) & 0xff) - (tmp & 0xff)) > 1;
+	return (((tmp >> 8) - tmp) & 0xff) > 1;
 }
 
 static __always_inline void __ticket_spin_lock(raw_spinlock_t *lock)
@@ -127,7 +127,7 @@ static inline int __ticket_spin_is_contended(raw_spinlock_t *lock)
 {
 	int tmp = ACCESS_ONCE(lock->slock);
 
-	return (((tmp >> 16) & 0xffff) - (tmp & 0xffff)) > 1;
+	return (((tmp >> 16) - tmp) & 0xffff) > 1;
 }
 
 static __always_inline void __ticket_spin_lock(raw_spinlock_t *lock)
@@ -366,4 +366,4 @@ static inline void __raw_write_unlock(raw_rwlock_t *rw)
 #define _raw_read_relax(lock)	cpu_relax()
 #define _raw_write_relax(lock)	cpu_relax()
 
-#endif
+#endif /* ASM_X86__SPINLOCK_H */
diff --git a/include/asm-x86/spinlock_types.h b/include/asm-x86/spinlock_types.h
index 06c071c9eee9..6aa9b562c508 100644
--- a/include/asm-x86/spinlock_types.h
+++ b/include/asm-x86/spinlock_types.h
@@ -1,5 +1,5 @@
-#ifndef __ASM_SPINLOCK_TYPES_H
-#define __ASM_SPINLOCK_TYPES_H
+#ifndef ASM_X86__SPINLOCK_TYPES_H
+#define ASM_X86__SPINLOCK_TYPES_H
 
 #ifndef __LINUX_SPINLOCK_TYPES_H
 # error "please don't include this file directly"
@@ -17,4 +17,4 @@ typedef struct {
 
 #define __RAW_RW_LOCK_UNLOCKED		{ RW_LOCK_BIAS }
 
-#endif
+#endif /* ASM_X86__SPINLOCK_TYPES_H */
diff --git a/include/asm-x86/srat.h b/include/asm-x86/srat.h
index 774c919dc232..5363e4f7e1cd 100644
--- a/include/asm-x86/srat.h
+++ b/include/asm-x86/srat.h
@@ -24,8 +24,8 @@
  * Send feedback to Pat Gaughen <gone@us.ibm.com>
  */
 
-#ifndef _ASM_SRAT_H_
-#define _ASM_SRAT_H_
+#ifndef ASM_X86__SRAT_H
+#define ASM_X86__SRAT_H
 
 #ifdef CONFIG_ACPI_NUMA
 extern int get_memcfg_from_srat(void);
@@ -36,4 +36,4 @@ static inline int get_memcfg_from_srat(void)
 }
 #endif
 
-#endif /* _ASM_SRAT_H_ */
+#endif /* ASM_X86__SRAT_H */
diff --git a/include/asm-x86/stacktrace.h b/include/asm-x86/stacktrace.h
index 30f82526a8e2..f43517e28532 100644
--- a/include/asm-x86/stacktrace.h
+++ b/include/asm-x86/stacktrace.h
@@ -1,5 +1,5 @@
-#ifndef _ASM_STACKTRACE_H
-#define _ASM_STACKTRACE_H 1
+#ifndef ASM_X86__STACKTRACE_H
+#define ASM_X86__STACKTRACE_H
 
 extern int kstack_depth_to_print;
 
@@ -18,4 +18,4 @@ void dump_trace(struct task_struct *tsk, struct pt_regs *regs,
 		unsigned long *stack, unsigned long bp,
 		const struct stacktrace_ops *ops, void *data);
 
-#endif
+#endif /* ASM_X86__STACKTRACE_H */
diff --git a/include/asm-x86/stat.h b/include/asm-x86/stat.h
index 5c22dcb5d17e..1e120f628905 100644
--- a/include/asm-x86/stat.h
+++ b/include/asm-x86/stat.h
@@ -1,5 +1,5 @@
-#ifndef _ASM_X86_STAT_H
-#define _ASM_X86_STAT_H
+#ifndef ASM_X86__STAT_H
+#define ASM_X86__STAT_H
 
 #define STAT_HAVE_NSEC 1
 
@@ -111,4 +111,4 @@ struct __old_kernel_stat {
 #endif
 };
 
-#endif
+#endif /* ASM_X86__STAT_H */
diff --git a/include/asm-x86/statfs.h b/include/asm-x86/statfs.h
index 7c651aa97252..3f005bc3aa5b 100644
--- a/include/asm-x86/statfs.h
+++ b/include/asm-x86/statfs.h
@@ -1,5 +1,5 @@
-#ifndef _ASM_X86_STATFS_H
-#define _ASM_X86_STATFS_H
+#ifndef ASM_X86__STATFS_H
+#define ASM_X86__STATFS_H
 
 #ifdef __i386__
 #include <asm-generic/statfs.h>
@@ -60,4 +60,4 @@ struct compat_statfs64 {
 } __attribute__((packed));
 
 #endif /* !__i386__ */
-#endif
+#endif /* ASM_X86__STATFS_H */
diff --git a/include/asm-x86/string_32.h b/include/asm-x86/string_32.h
index 193578cd1fd9..487843ed245a 100644
--- a/include/asm-x86/string_32.h
+++ b/include/asm-x86/string_32.h
@@ -1,5 +1,5 @@
-#ifndef _I386_STRING_H_
-#define _I386_STRING_H_
+#ifndef ASM_X86__STRING_32_H
+#define ASM_X86__STRING_32_H
 
 #ifdef __KERNEL__
 
@@ -323,4 +323,4 @@ extern void *memscan(void *addr, int c, size_t size);
 
 #endif /* __KERNEL__ */
 
-#endif
+#endif /* ASM_X86__STRING_32_H */
diff --git a/include/asm-x86/string_64.h b/include/asm-x86/string_64.h
index 52b5ab383395..a2add11d3b66 100644
--- a/include/asm-x86/string_64.h
+++ b/include/asm-x86/string_64.h
@@ -1,5 +1,5 @@
-#ifndef _X86_64_STRING_H_
-#define _X86_64_STRING_H_
+#ifndef ASM_X86__STRING_64_H
+#define ASM_X86__STRING_64_H
 
 #ifdef __KERNEL__
 
@@ -57,4 +57,4 @@ int strcmp(const char *cs, const char *ct);
 
 #endif /* __KERNEL__ */
 
-#endif
+#endif /* ASM_X86__STRING_64_H */
diff --git a/include/asm-x86/summit/apic.h b/include/asm-x86/summit/apic.h
new file mode 100644
index 000000000000..c5b2e4b10358
--- /dev/null
+++ b/include/asm-x86/summit/apic.h
@@ -0,0 +1,185 @@
+#ifndef __ASM_SUMMIT_APIC_H
+#define __ASM_SUMMIT_APIC_H
+
+#include <asm/smp.h>
+
+#define esr_disable (1)
+#define NO_BALANCE_IRQ (0)
+
+/* In clustered mode, the high nibble of APIC ID is a cluster number.
+ * The low nibble is a 4-bit bitmap. */
+#define XAPIC_DEST_CPUS_SHIFT	4
+#define XAPIC_DEST_CPUS_MASK	((1u << XAPIC_DEST_CPUS_SHIFT) - 1)
+#define XAPIC_DEST_CLUSTER_MASK	(XAPIC_DEST_CPUS_MASK << XAPIC_DEST_CPUS_SHIFT)
+
+#define APIC_DFR_VALUE	(APIC_DFR_CLUSTER)
+
+static inline cpumask_t target_cpus(void)
+{
+	/* CPU_MASK_ALL (0xff) has undefined behaviour with
+	 * dest_LowestPrio mode logical clustered apic interrupt routing
+	 * Just start on cpu 0.  IRQ balancing will spread load
+	 */
+	return cpumask_of_cpu(0);
+}
+#define TARGET_CPUS	(target_cpus())
+
+#define INT_DELIVERY_MODE (dest_LowestPrio)
+#define INT_DEST_MODE 1     /* logical delivery broadcast to all procs */
+
+static inline unsigned long check_apicid_used(physid_mask_t bitmap, int apicid)
+{
+	return 0;
+}
+
+/* we don't use the phys_cpu_present_map to indicate apicid presence */
+static inline unsigned long check_apicid_present(int bit)
+{
+	return 1;
+}
+
+#define apicid_cluster(apicid) ((apicid) & XAPIC_DEST_CLUSTER_MASK)
+
+extern u8 cpu_2_logical_apicid[];
+
+static inline void init_apic_ldr(void)
+{
+	unsigned long val, id;
+	int count = 0;
+	u8 my_id = (u8)hard_smp_processor_id();
+	u8 my_cluster = (u8)apicid_cluster(my_id);
+#ifdef CONFIG_SMP
+	u8 lid;
+	int i;
+
+	/* Create logical APIC IDs by counting CPUs already in cluster. */
+	for (count = 0, i = NR_CPUS; --i >= 0; ) {
+		lid = cpu_2_logical_apicid[i];
+		if (lid != BAD_APICID && apicid_cluster(lid) == my_cluster)
+			++count;
+	}
+#endif
+	/* We only have a 4 wide bitmap in cluster mode.  If a deranged
+	 * BIOS puts 5 CPUs in one APIC cluster, we're hosed. */
+	BUG_ON(count >= XAPIC_DEST_CPUS_SHIFT);
+	id = my_cluster | (1UL << count);
+	apic_write(APIC_DFR, APIC_DFR_VALUE);
+	val = apic_read(APIC_LDR) & ~APIC_LDR_MASK;
+	val |= SET_APIC_LOGICAL_ID(id);
+	apic_write(APIC_LDR, val);
+}
+
+static inline int multi_timer_check(int apic, int irq)
+{
+	return 0;
+}
+
+static inline int apic_id_registered(void)
+{
+	return 1;
+}
+
+static inline void setup_apic_routing(void)
+{
+	printk("Enabling APIC mode:  Summit.  Using %d I/O APICs\n",
+						nr_ioapics);
+}
+
+static inline int apicid_to_node(int logical_apicid)
+{
+#ifdef CONFIG_SMP
+	return apicid_2_node[hard_smp_processor_id()];
+#else
+	return 0;
+#endif
+}
+
+/* Mapping from cpu number to logical apicid */
+static inline int cpu_to_logical_apicid(int cpu)
+{
+#ifdef CONFIG_SMP
+       if (cpu >= NR_CPUS)
+	       return BAD_APICID;
+	return (int)cpu_2_logical_apicid[cpu];
+#else
+	return logical_smp_processor_id();
+#endif
+}
+
+static inline int cpu_present_to_apicid(int mps_cpu)
+{
+	if (mps_cpu < NR_CPUS)
+		return (int)per_cpu(x86_bios_cpu_apicid, mps_cpu);
+	else
+		return BAD_APICID;
+}
+
+static inline physid_mask_t ioapic_phys_id_map(physid_mask_t phys_id_map)
+{
+	/* For clustered we don't have a good way to do this yet - hack */
+	return physids_promote(0x0F);
+}
+
+static inline physid_mask_t apicid_to_cpu_present(int apicid)
+{
+	return physid_mask_of_physid(0);
+}
+
+static inline void setup_portio_remap(void)
+{
+}
+
+static inline int check_phys_apicid_present(int boot_cpu_physical_apicid)
+{
+	return 1;
+}
+
+static inline void enable_apic_mode(void)
+{
+}
+
+static inline unsigned int cpu_mask_to_apicid(cpumask_t cpumask)
+{
+	int num_bits_set;
+	int cpus_found = 0;
+	int cpu;
+	int apicid;
+
+	num_bits_set = cpus_weight(cpumask);
+	/* Return id to all */
+	if (num_bits_set == NR_CPUS)
+		return (int) 0xFF;
+	/*
+	 * The cpus in the mask must all be on the apic cluster.  If are not
+	 * on the same apicid cluster return default value of TARGET_CPUS.
+	 */
+	cpu = first_cpu(cpumask);
+	apicid = cpu_to_logical_apicid(cpu);
+	while (cpus_found < num_bits_set) {
+		if (cpu_isset(cpu, cpumask)) {
+			int new_apicid = cpu_to_logical_apicid(cpu);
+			if (apicid_cluster(apicid) !=
+					apicid_cluster(new_apicid)){
+				printk ("%s: Not a valid mask!\n",__FUNCTION__);
+				return 0xFF;
+			}
+			apicid = apicid | new_apicid;
+			cpus_found++;
+		}
+		cpu++;
+	}
+	return apicid;
+}
+
+/* cpuid returns the value latched in the HW at reset, not the APIC ID
+ * register's value.  For any box whose BIOS changes APIC IDs, like
+ * clustered APIC systems, we must use hard_smp_processor_id.
+ *
+ * See Intel's IA-32 SW Dev's Manual Vol2 under CPUID.
+ */
+static inline u32 phys_pkg_id(u32 cpuid_apic, int index_msb)
+{
+	return hard_smp_processor_id() >> index_msb;
+}
+
+#endif /* __ASM_SUMMIT_APIC_H */
diff --git a/include/asm-x86/summit/apicdef.h b/include/asm-x86/summit/apicdef.h
new file mode 100644
index 000000000000..f3fbca1f61c1
--- /dev/null
+++ b/include/asm-x86/summit/apicdef.h
@@ -0,0 +1,13 @@
+#ifndef __ASM_SUMMIT_APICDEF_H
+#define __ASM_SUMMIT_APICDEF_H
+
+#define		APIC_ID_MASK		(0xFF<<24)
+
+static inline unsigned get_apic_id(unsigned long x)
+{
+	return (x>>24)&0xFF;
+}
+
+#define		GET_APIC_ID(x)	get_apic_id(x)
+
+#endif
diff --git a/include/asm-x86/summit/ipi.h b/include/asm-x86/summit/ipi.h
new file mode 100644
index 000000000000..53bd1e7bd7b4
--- /dev/null
+++ b/include/asm-x86/summit/ipi.h
@@ -0,0 +1,25 @@
+#ifndef __ASM_SUMMIT_IPI_H
+#define __ASM_SUMMIT_IPI_H
+
+void send_IPI_mask_sequence(cpumask_t mask, int vector);
+
+static inline void send_IPI_mask(cpumask_t mask, int vector)
+{
+	send_IPI_mask_sequence(mask, vector);
+}
+
+static inline void send_IPI_allbutself(int vector)
+{
+	cpumask_t mask = cpu_online_map;
+	cpu_clear(smp_processor_id(), mask);
+
+	if (!cpus_empty(mask))
+		send_IPI_mask(mask, vector);
+}
+
+static inline void send_IPI_all(int vector)
+{
+	send_IPI_mask(cpu_online_map, vector);
+}
+
+#endif /* __ASM_SUMMIT_IPI_H */
diff --git a/include/asm-x86/mach-summit/irq_vectors_limits.h b/include/asm-x86/summit/irq_vectors_limits.h
index 890ce3f5e09a..890ce3f5e09a 100644
--- a/include/asm-x86/mach-summit/irq_vectors_limits.h
+++ b/include/asm-x86/summit/irq_vectors_limits.h
diff --git a/include/asm-x86/summit/mpparse.h b/include/asm-x86/summit/mpparse.h
new file mode 100644
index 000000000000..013ce6fab2d5
--- /dev/null
+++ b/include/asm-x86/summit/mpparse.h
@@ -0,0 +1,109 @@
+#ifndef __ASM_SUMMIT_MPPARSE_H
+#define __ASM_SUMMIT_MPPARSE_H
+
+#include <asm/tsc.h>
+
+extern int use_cyclone;
+
+#ifdef CONFIG_X86_SUMMIT_NUMA
+extern void setup_summit(void);
+#else
+#define setup_summit()	{}
+#endif
+
+static inline int mps_oem_check(struct mp_config_table *mpc, char *oem,
+		char *productid)
+{
+	if (!strncmp(oem, "IBM ENSW", 8) &&
+			(!strncmp(productid, "VIGIL SMP", 9)
+			 || !strncmp(productid, "EXA", 3)
+			 || !strncmp(productid, "RUTHLESS SMP", 12))){
+		mark_tsc_unstable("Summit based system");
+		use_cyclone = 1; /*enable cyclone-timer*/
+		setup_summit();
+		return 1;
+	}
+	return 0;
+}
+
+/* Hook from generic ACPI tables.c */
+static inline int acpi_madt_oem_check(char *oem_id, char *oem_table_id)
+{
+	if (!strncmp(oem_id, "IBM", 3) &&
+	    (!strncmp(oem_table_id, "SERVIGIL", 8)
+	     || !strncmp(oem_table_id, "EXA", 3))){
+		mark_tsc_unstable("Summit based system");
+		use_cyclone = 1; /*enable cyclone-timer*/
+		setup_summit();
+		return 1;
+	}
+	return 0;
+}
+
+struct rio_table_hdr {
+	unsigned char version;      /* Version number of this data structure           */
+	                            /* Version 3 adds chassis_num & WP_index           */
+	unsigned char num_scal_dev; /* # of Scalability devices (Twisters for Vigil)   */
+	unsigned char num_rio_dev;  /* # of RIO I/O devices (Cyclones and Winnipegs)   */
+} __attribute__((packed));
+
+struct scal_detail {
+	unsigned char node_id;      /* Scalability Node ID                             */
+	unsigned long CBAR;         /* Address of 1MB register space                   */
+	unsigned char port0node;    /* Node ID port connected to: 0xFF=None            */
+	unsigned char port0port;    /* Port num port connected to: 0,1,2, or 0xFF=None */
+	unsigned char port1node;    /* Node ID port connected to: 0xFF = None          */
+	unsigned char port1port;    /* Port num port connected to: 0,1,2, or 0xFF=None */
+	unsigned char port2node;    /* Node ID port connected to: 0xFF = None          */
+	unsigned char port2port;    /* Port num port connected to: 0,1,2, or 0xFF=None */
+	unsigned char chassis_num;  /* 1 based Chassis number (1 = boot node)          */
+} __attribute__((packed));
+
+struct rio_detail {
+	unsigned char node_id;      /* RIO Node ID                                     */
+	unsigned long BBAR;         /* Address of 1MB register space                   */
+	unsigned char type;         /* Type of device                                  */
+	unsigned char owner_id;     /* For WPEG: Node ID of Cyclone that owns this WPEG*/
+	                            /* For CYC:  Node ID of Twister that owns this CYC */
+	unsigned char port0node;    /* Node ID port connected to: 0xFF=None            */
+	unsigned char port0port;    /* Port num port connected to: 0,1,2, or 0xFF=None */
+	unsigned char port1node;    /* Node ID port connected to: 0xFF=None            */
+	unsigned char port1port;    /* Port num port connected to: 0,1,2, or 0xFF=None */
+	unsigned char first_slot;   /* For WPEG: Lowest slot number below this WPEG    */
+	                            /* For CYC:  0                                     */
+	unsigned char status;       /* For WPEG: Bit 0 = 1 : the XAPIC is used         */
+	                            /*                 = 0 : the XAPIC is not used, ie:*/
+	                            /*                     ints fwded to another XAPIC */
+	                            /*           Bits1:7 Reserved                      */
+	                            /* For CYC:  Bits0:7 Reserved                      */
+	unsigned char WP_index;     /* For WPEG: WPEG instance index - lower ones have */
+	                            /*           lower slot numbers/PCI bus numbers    */
+	                            /* For CYC:  No meaning                            */
+	unsigned char chassis_num;  /* 1 based Chassis number                          */
+	                            /* For LookOut WPEGs this field indicates the      */
+	                            /* Expansion Chassis #, enumerated from Boot       */
+	                            /* Node WPEG external port, then Boot Node CYC     */
+	                            /* external port, then Next Vigil chassis WPEG     */
+	                            /* external port, etc.                             */
+	                            /* Shared Lookouts have only 1 chassis number (the */
+	                            /* first one assigned)                             */
+} __attribute__((packed));
+
+
+typedef enum {
+	CompatTwister = 0,  /* Compatibility Twister               */
+	AltTwister    = 1,  /* Alternate Twister of internal 8-way */
+	CompatCyclone = 2,  /* Compatibility Cyclone               */
+	AltCyclone    = 3,  /* Alternate Cyclone of internal 8-way */
+	CompatWPEG    = 4,  /* Compatibility WPEG                  */
+	AltWPEG       = 5,  /* Second Planar WPEG                  */
+	LookOutAWPEG  = 6,  /* LookOut WPEG                        */
+	LookOutBWPEG  = 7,  /* LookOut WPEG                        */
+} node_type;
+
+static inline int is_WPEG(struct rio_detail *rio){
+	return (rio->type == CompatWPEG || rio->type == AltWPEG ||
+		rio->type == LookOutAWPEG || rio->type == LookOutBWPEG);
+}
+
+#endif /* __ASM_SUMMIT_MPPARSE_H */
diff --git a/include/asm-x86/suspend_32.h b/include/asm-x86/suspend_32.h
index 8675c6782a7d..acb6d4d491f4 100644
--- a/include/asm-x86/suspend_32.h
+++ b/include/asm-x86/suspend_32.h
@@ -3,8 +3,8 @@
  * Based on code
  * Copyright 2001 Patrick Mochel <mochel@osdl.org>
  */
-#ifndef __ASM_X86_32_SUSPEND_H
-#define __ASM_X86_32_SUSPEND_H
+#ifndef ASM_X86__SUSPEND_32_H
+#define ASM_X86__SUSPEND_32_H
 
 #include <asm/desc.h>
 #include <asm/i387.h>
@@ -48,4 +48,4 @@ static inline void acpi_save_register_state(unsigned long return_point)
 extern int acpi_save_state_mem(void);
 #endif
 
-#endif /* __ASM_X86_32_SUSPEND_H */
+#endif /* ASM_X86__SUSPEND_32_H */
diff --git a/include/asm-x86/suspend_64.h b/include/asm-x86/suspend_64.h
index dc3262b43072..cf821dd310e8 100644
--- a/include/asm-x86/suspend_64.h
+++ b/include/asm-x86/suspend_64.h
@@ -3,8 +3,8 @@
  * Based on code
  * Copyright 2001 Patrick Mochel <mochel@osdl.org>
  */
-#ifndef __ASM_X86_64_SUSPEND_H
-#define __ASM_X86_64_SUSPEND_H
+#ifndef ASM_X86__SUSPEND_64_H
+#define ASM_X86__SUSPEND_64_H
 
 #include <asm/desc.h>
 #include <asm/i387.h>
@@ -49,4 +49,4 @@ extern int acpi_save_state_mem(void);
 extern char core_restore_code;
 extern char restore_registers;
 
-#endif /* __ASM_X86_64_SUSPEND_H */
+#endif /* ASM_X86__SUSPEND_64_H */
diff --git a/include/asm-x86/swiotlb.h b/include/asm-x86/swiotlb.h
index c706a7442633..1e20adbcad4b 100644
--- a/include/asm-x86/swiotlb.h
+++ b/include/asm-x86/swiotlb.h
@@ -1,5 +1,5 @@
-#ifndef _ASM_SWIOTLB_H
-#define _ASM_SWIOTLB_H 1
+#ifndef ASM_X86__SWIOTLB_H
+#define ASM_X86__SWIOTLB_H
 
 #include <asm/dma-mapping.h>
 
@@ -35,7 +35,7 @@ extern int swiotlb_map_sg(struct device *hwdev, struct scatterlist *sg,
 			  int nents, int direction);
 extern void swiotlb_unmap_sg(struct device *hwdev, struct scatterlist *sg,
 			     int nents, int direction);
-extern int swiotlb_dma_mapping_error(dma_addr_t dma_addr);
+extern int swiotlb_dma_mapping_error(struct device *hwdev, dma_addr_t dma_addr);
 extern void swiotlb_free_coherent(struct device *hwdev, size_t size,
 				  void *vaddr, dma_addr_t dma_handle);
 extern int swiotlb_dma_supported(struct device *hwdev, u64 mask);
@@ -55,4 +55,4 @@ static inline void pci_swiotlb_init(void)
 
 static inline void dma_mark_clean(void *addr, size_t size) {}
 
-#endif /* _ASM_SWIOTLB_H */
+#endif /* ASM_X86__SWIOTLB_H */
diff --git a/include/asm-x86/sync_bitops.h b/include/asm-x86/sync_bitops.h
index b47a1d0b8a83..b689bee71104 100644
--- a/include/asm-x86/sync_bitops.h
+++ b/include/asm-x86/sync_bitops.h
@@ -1,5 +1,5 @@
-#ifndef _I386_SYNC_BITOPS_H
-#define _I386_SYNC_BITOPS_H
+#ifndef ASM_X86__SYNC_BITOPS_H
+#define ASM_X86__SYNC_BITOPS_H
 
 /*
  * Copyright 1992, Linus Torvalds.
@@ -127,4 +127,4 @@ static inline int sync_test_and_change_bit(int nr, volatile unsigned long *addr)
 
 #undef ADDR
 
-#endif /* _I386_SYNC_BITOPS_H */
+#endif /* ASM_X86__SYNC_BITOPS_H */
diff --git a/include/asm-x86/syscalls.h b/include/asm-x86/syscalls.h
new file mode 100644
index 000000000000..87803da44010
--- /dev/null
+++ b/include/asm-x86/syscalls.h
@@ -0,0 +1,93 @@
+/*
+ * syscalls.h - Linux syscall interfaces (arch-specific)
+ *
+ * Copyright (c) 2008 Jaswinder Singh
+ *
+ * This file is released under the GPLv2.
+ * See the file COPYING for more details.
+ */
+
+#ifndef _ASM_X86_SYSCALLS_H
+#define _ASM_X86_SYSCALLS_H
+
+#include <linux/compiler.h>
+#include <linux/linkage.h>
+#include <linux/types.h>
+#include <linux/signal.h>
+
+/* Common in X86_32 and X86_64 */
+/* kernel/ioport.c */
+asmlinkage long sys_ioperm(unsigned long, unsigned long, int);
+
+/* X86_32 only */
+#ifdef CONFIG_X86_32
+/* kernel/process_32.c */
+asmlinkage int sys_fork(struct pt_regs);
+asmlinkage int sys_clone(struct pt_regs);
+asmlinkage int sys_vfork(struct pt_regs);
+asmlinkage int sys_execve(struct pt_regs);
+
+/* kernel/signal_32.c */
+asmlinkage int sys_sigsuspend(int, int, old_sigset_t);
+asmlinkage int sys_sigaction(int, const struct old_sigaction __user *,
+			     struct old_sigaction __user *);
+asmlinkage int sys_sigaltstack(unsigned long);
+asmlinkage unsigned long sys_sigreturn(unsigned long);
+asmlinkage int sys_rt_sigreturn(unsigned long);
+
+/* kernel/ioport.c */
+asmlinkage long sys_iopl(unsigned long);
+
+/* kernel/ldt.c */
+asmlinkage int sys_modify_ldt(int, void __user *, unsigned long);
+
+/* kernel/sys_i386_32.c */
+asmlinkage long sys_mmap2(unsigned long, unsigned long, unsigned long,
+			  unsigned long, unsigned long, unsigned long);
+struct mmap_arg_struct;
+asmlinkage int old_mmap(struct mmap_arg_struct __user *);
+struct sel_arg_struct;
+asmlinkage int old_select(struct sel_arg_struct __user *);
+asmlinkage int sys_ipc(uint, int, int, int, void __user *, long);
+struct old_utsname;
+asmlinkage int sys_uname(struct old_utsname __user *);
+struct oldold_utsname;
+asmlinkage int sys_olduname(struct oldold_utsname __user *);
+
+/* kernel/tls.c */
+asmlinkage int sys_set_thread_area(struct user_desc __user *);
+asmlinkage int sys_get_thread_area(struct user_desc __user *);
+
+/* kernel/vm86_32.c */
+asmlinkage int sys_vm86old(struct pt_regs);
+asmlinkage int sys_vm86(struct pt_regs);
+
+#else /* CONFIG_X86_32 */
+
+/* X86_64 only */
+/* kernel/process_64.c */
+asmlinkage long sys_fork(struct pt_regs *);
+asmlinkage long sys_clone(unsigned long, unsigned long,
+			  void __user *, void __user *,
+			  struct pt_regs *);
+asmlinkage long sys_vfork(struct pt_regs *);
+asmlinkage long sys_execve(char __user *, char __user * __user *,
+			   char __user * __user *,
+			   struct pt_regs *);
+
+/* kernel/ioport.c */
+asmlinkage long sys_iopl(unsigned int, struct pt_regs *);
+
+/* kernel/signal_64.c */
+asmlinkage long sys_sigaltstack(const stack_t __user *, stack_t __user *,
+				struct pt_regs *);
+asmlinkage long sys_rt_sigreturn(struct pt_regs *);
+
+/* kernel/sys_x86_64.c */
+asmlinkage long sys_mmap(unsigned long, unsigned long, unsigned long,
+			 unsigned long, unsigned long, unsigned long);
+struct new_utsname;
+asmlinkage long sys_uname(struct new_utsname __user *);
+
+#endif /* CONFIG_X86_32 */
+#endif /* _ASM_X86_SYSCALLS_H */
diff --git a/include/asm-x86/system.h b/include/asm-x86/system.h
index 983ce37c491f..34505dd7b24d 100644
--- a/include/asm-x86/system.h
+++ b/include/asm-x86/system.h
@@ -1,5 +1,5 @@
-#ifndef _ASM_X86_SYSTEM_H_
-#define _ASM_X86_SYSTEM_H_
+#ifndef ASM_X86__SYSTEM_H
+#define ASM_X86__SYSTEM_H
 
 #include <asm/asm.h>
 #include <asm/segment.h>
@@ -419,4 +419,4 @@ static inline void rdtsc_barrier(void)
 	alternative(ASM_NOP3, "lfence", X86_FEATURE_LFENCE_RDTSC);
 }
 
-#endif
+#endif /* ASM_X86__SYSTEM_H */
diff --git a/include/asm-x86/system_64.h b/include/asm-x86/system_64.h
index 97fa251ccb2b..5aedb8bffc5a 100644
--- a/include/asm-x86/system_64.h
+++ b/include/asm-x86/system_64.h
@@ -1,5 +1,5 @@
-#ifndef __ASM_SYSTEM_H
-#define __ASM_SYSTEM_H
+#ifndef ASM_X86__SYSTEM_64_H
+#define ASM_X86__SYSTEM_64_H
 
 #include <asm/segment.h>
 #include <asm/cmpxchg.h>
@@ -19,4 +19,4 @@ static inline void write_cr8(unsigned long val)
 
 #include <linux/irqflags.h>
 
-#endif
+#endif /* ASM_X86__SYSTEM_64_H */
diff --git a/include/asm-x86/tce.h b/include/asm-x86/tce.h
index b1a4ea00df78..e7932d7fbbab 100644
--- a/include/asm-x86/tce.h
+++ b/include/asm-x86/tce.h
@@ -21,8 +21,8 @@
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
  */
 
-#ifndef _ASM_X86_64_TCE_H
-#define _ASM_X86_64_TCE_H
+#ifndef ASM_X86__TCE_H
+#define ASM_X86__TCE_H
 
 extern unsigned int specified_table_size;
 struct iommu_table;
@@ -45,4 +45,4 @@ extern void * __init alloc_tce_table(void);
 extern void __init free_tce_table(void *tbl);
 extern int __init build_tce_table(struct pci_dev *dev, void __iomem *bbar);
 
-#endif /* _ASM_X86_64_TCE_H */
+#endif /* ASM_X86__TCE_H */
diff --git a/include/asm-x86/termbits.h b/include/asm-x86/termbits.h
index af1b70ea440f..3d00dc5e0c71 100644
--- a/include/asm-x86/termbits.h
+++ b/include/asm-x86/termbits.h
@@ -1,5 +1,5 @@
-#ifndef _ASM_X86_TERMBITS_H
-#define _ASM_X86_TERMBITS_H
+#ifndef ASM_X86__TERMBITS_H
+#define ASM_X86__TERMBITS_H
 
 #include <linux/posix_types.h>
 
@@ -195,4 +195,4 @@ struct ktermios {
 #define	TCSADRAIN	1
 #define	TCSAFLUSH	2
 
-#endif /* _ASM_X86_TERMBITS_H */
+#endif /* ASM_X86__TERMBITS_H */
diff --git a/include/asm-x86/termios.h b/include/asm-x86/termios.h
index f72956331c49..e235db248071 100644
--- a/include/asm-x86/termios.h
+++ b/include/asm-x86/termios.h
@@ -1,5 +1,5 @@
-#ifndef _ASM_X86_TERMIOS_H
-#define _ASM_X86_TERMIOS_H
+#ifndef ASM_X86__TERMIOS_H
+#define ASM_X86__TERMIOS_H
 
 #include <asm/termbits.h>
 #include <asm/ioctls.h>
@@ -110,4 +110,4 @@ static inline int kernel_termios_to_user_termios_1(struct termios __user *u,
 
 #endif	/* __KERNEL__ */
 
-#endif /* _ASM_X86_TERMIOS_H */
+#endif /* ASM_X86__TERMIOS_H */
diff --git a/include/asm-x86/therm_throt.h b/include/asm-x86/therm_throt.h
index 399bf6026b16..1c7f57b6b66e 100644
--- a/include/asm-x86/therm_throt.h
+++ b/include/asm-x86/therm_throt.h
@@ -1,9 +1,9 @@
-#ifndef __ASM_I386_THERM_THROT_H__
-#define __ASM_I386_THERM_THROT_H__ 1
+#ifndef ASM_X86__THERM_THROT_H
+#define ASM_X86__THERM_THROT_H
 
 #include <asm/atomic.h>
 
 extern atomic_t therm_throt_en;
 int therm_throt_process(int curr);
 
-#endif /* __ASM_I386_THERM_THROT_H__ */
+#endif /* ASM_X86__THERM_THROT_H */
diff --git a/include/asm-x86/thread_info.h b/include/asm-x86/thread_info.h
index 3f2de1050988..30586f2ee558 100644
--- a/include/asm-x86/thread_info.h
+++ b/include/asm-x86/thread_info.h
@@ -4,8 +4,8 @@
  * - Incorporating suggestions made by Linus Torvalds and Dave Miller
  */
 
-#ifndef _ASM_X86_THREAD_INFO_H
-#define _ASM_X86_THREAD_INFO_H
+#ifndef ASM_X86__THREAD_INFO_H
+#define ASM_X86__THREAD_INFO_H
 
 #include <linux/compiler.h>
 #include <asm/page.h>
@@ -152,6 +152,8 @@ struct thread_info {
 #define THREAD_FLAGS GFP_KERNEL
 #endif
 
+#define __HAVE_ARCH_THREAD_INFO_ALLOCATOR
+
 #define alloc_thread_info(tsk)						\
 	((struct thread_info *)__get_free_pages(THREAD_FLAGS, THREAD_ORDER))
 
@@ -237,6 +239,7 @@ static inline struct thread_info *stack_thread_info(void)
 #define TS_POLLING		0x0004	/* true if in idle loop
 					   and not sleeping */
 #define TS_RESTORE_SIGMASK	0x0008	/* restore signal mask in do_signal() */
+#define TS_XSAVE		0x0010	/* Use xsave/xrstor */
 
 #define tsk_is_polling(t) (task_thread_info(t)->status & TS_POLLING)
 
@@ -256,4 +259,4 @@ extern void free_thread_info(struct thread_info *ti);
 extern int arch_dup_task_struct(struct task_struct *dst, struct task_struct *src);
 #define arch_task_cache_init arch_task_cache_init
 #endif
-#endif /* _ASM_X86_THREAD_INFO_H */
+#endif /* ASM_X86__THREAD_INFO_H */
diff --git a/include/asm-x86/time.h b/include/asm-x86/time.h
index a17fa473e91d..3e724eef7ac4 100644
--- a/include/asm-x86/time.h
+++ b/include/asm-x86/time.h
@@ -1,5 +1,5 @@
-#ifndef _ASMX86_TIME_H
-#define _ASMX86_TIME_H
+#ifndef ASM_X86__TIME_H
+#define ASM_X86__TIME_H
 
 extern void hpet_time_init(void);
 
@@ -46,6 +46,8 @@ static inline int native_set_wallclock(unsigned long nowtime)
 
 #endif
 
+extern void time_init(void);
+
 #ifdef CONFIG_PARAVIRT
 #include <asm/paravirt.h>
 #else /* !CONFIG_PARAVIRT */
@@ -58,4 +60,4 @@ static inline int native_set_wallclock(unsigned long nowtime)
 
 extern unsigned long __init calibrate_cpu(void);
 
-#endif
+#endif /* ASM_X86__TIME_H */
diff --git a/include/asm-x86/timer.h b/include/asm-x86/timer.h
index fb2a4ddddf3d..d0babce4b47a 100644
--- a/include/asm-x86/timer.h
+++ b/include/asm-x86/timer.h
@@ -1,5 +1,5 @@
-#ifndef _ASMi386_TIMER_H
-#define _ASMi386_TIMER_H
+#ifndef ASM_X86__TIMER_H
+#define ASM_X86__TIMER_H
 #include <linux/init.h>
 #include <linux/pm.h>
 #include <linux/percpu.h>
@@ -9,9 +9,12 @@
 unsigned long long native_sched_clock(void);
 unsigned long native_calibrate_tsc(void);
 
+#ifdef CONFIG_X86_32
 extern int timer_ack;
-extern int no_timer_check;
 extern int recalibrate_cpu_khz(void);
+#endif /* CONFIG_X86_32 */
+
+extern int no_timer_check;
 
 #ifndef CONFIG_PARAVIRT
 #define calibrate_tsc() native_calibrate_tsc()
@@ -60,4 +63,4 @@ static inline unsigned long long cycles_2_ns(unsigned long long cyc)
 	return ns;
 }
 
-#endif
+#endif /* ASM_X86__TIMER_H */
diff --git a/include/asm-x86/timex.h b/include/asm-x86/timex.h
index 43e5a78500c5..d1ce2416a5da 100644
--- a/include/asm-x86/timex.h
+++ b/include/asm-x86/timex.h
@@ -1,6 +1,6 @@
 /* x86 architecture timex specifications */
-#ifndef _ASM_X86_TIMEX_H
-#define _ASM_X86_TIMEX_H
+#ifndef ASM_X86__TIMEX_H
+#define ASM_X86__TIMEX_H
 
 #include <asm/processor.h>
 #include <asm/tsc.h>
@@ -16,4 +16,4 @@
 
 #define ARCH_HAS_READ_CURRENT_TIMER
 
-#endif
+#endif /* ASM_X86__TIMEX_H */
diff --git a/include/asm-x86/tlb.h b/include/asm-x86/tlb.h
index e4e9e2d07a93..db36e9e89e87 100644
--- a/include/asm-x86/tlb.h
+++ b/include/asm-x86/tlb.h
@@ -1,5 +1,5 @@
-#ifndef _ASM_X86_TLB_H
-#define _ASM_X86_TLB_H
+#ifndef ASM_X86__TLB_H
+#define ASM_X86__TLB_H
 
 #define tlb_start_vma(tlb, vma) do { } while (0)
 #define tlb_end_vma(tlb, vma) do { } while (0)
@@ -8,4 +8,4 @@
 
 #include <asm-generic/tlb.h>
 
-#endif
+#endif /* ASM_X86__TLB_H */
diff --git a/include/asm-x86/tlbflush.h b/include/asm-x86/tlbflush.h
index 35c76ceb9f40..ef68b76dc3c5 100644
--- a/include/asm-x86/tlbflush.h
+++ b/include/asm-x86/tlbflush.h
@@ -1,5 +1,5 @@
-#ifndef _ASM_X86_TLBFLUSH_H
-#define _ASM_X86_TLBFLUSH_H
+#ifndef ASM_X86__TLBFLUSH_H
+#define ASM_X86__TLBFLUSH_H
 
 #include <linux/mm.h>
 #include <linux/sched.h>
@@ -165,4 +165,4 @@ static inline void flush_tlb_kernel_range(unsigned long start,
 	flush_tlb_all();
 }
 
-#endif /* _ASM_X86_TLBFLUSH_H */
+#endif /* ASM_X86__TLBFLUSH_H */
diff --git a/include/asm-x86/topology.h b/include/asm-x86/topology.h
index 90ac7718469a..7eca9bc022b2 100644
--- a/include/asm-x86/topology.h
+++ b/include/asm-x86/topology.h
@@ -22,8 +22,8 @@
  *
  * Send feedback to <colpatch@us.ibm.com>
  */
-#ifndef _ASM_X86_TOPOLOGY_H
-#define _ASM_X86_TOPOLOGY_H
+#ifndef ASM_X86__TOPOLOGY_H
+#define ASM_X86__TOPOLOGY_H
 
 #ifdef CONFIG_X86_32
 # ifdef CONFIG_X86_HT
@@ -255,4 +255,4 @@ static inline void set_mp_bus_to_node(int busnum, int node)
 }
 #endif
 
-#endif /* _ASM_X86_TOPOLOGY_H */
+#endif /* ASM_X86__TOPOLOGY_H */
diff --git a/include/asm-x86/trampoline.h b/include/asm-x86/trampoline.h
index b156b08d0131..0406bbd898a9 100644
--- a/include/asm-x86/trampoline.h
+++ b/include/asm-x86/trampoline.h
@@ -1,5 +1,5 @@
-#ifndef __TRAMPOLINE_HEADER
-#define __TRAMPOLINE_HEADER
+#ifndef ASM_X86__TRAMPOLINE_H
+#define ASM_X86__TRAMPOLINE_H
 
 #ifndef __ASSEMBLY__
 
@@ -18,4 +18,4 @@ extern unsigned long setup_trampoline(void);
 
 #endif /* __ASSEMBLY__ */
 
-#endif /* __TRAMPOLINE_HEADER */
+#endif /* ASM_X86__TRAMPOLINE_H */
diff --git a/include/asm-x86/traps.h b/include/asm-x86/traps.h
index a4b65a71bd66..2ccebc6fb0b0 100644
--- a/include/asm-x86/traps.h
+++ b/include/asm-x86/traps.h
@@ -1,5 +1,5 @@
-#ifndef _ASM_X86_TRAPS_H
-#define _ASM_X86_TRAPS_H
+#ifndef ASM_X86__TRAPS_H
+#define ASM_X86__TRAPS_H
 
 /* Common in X86_32 and X86_64 */
 asmlinkage void divide_error(void);
@@ -51,6 +51,8 @@ void do_spurious_interrupt_bug(struct pt_regs *, long);
 unsigned long patch_espfix_desc(unsigned long, unsigned long);
 asmlinkage void math_emulate(long);
 
+void do_page_fault(struct pt_regs *regs, unsigned long error_code);
+
 #else /* CONFIG_X86_32 */
 
 asmlinkage void double_fault(void);
@@ -62,5 +64,7 @@ asmlinkage void do_coprocessor_error(struct pt_regs *);
 asmlinkage void do_simd_coprocessor_error(struct pt_regs *);
 asmlinkage void do_spurious_interrupt_bug(struct pt_regs *);
 
+asmlinkage void do_page_fault(struct pt_regs *regs, unsigned long error_code);
+
 #endif /* CONFIG_X86_32 */
-#endif /* _ASM_X86_TRAPS_H */
+#endif /* ASM_X86__TRAPS_H */
diff --git a/include/asm-x86/tsc.h b/include/asm-x86/tsc.h
index cb6f6ee45b8f..ad0f5c41e78c 100644
--- a/include/asm-x86/tsc.h
+++ b/include/asm-x86/tsc.h
@@ -1,8 +1,8 @@
 /*
  * x86 TSC related functions
  */
-#ifndef _ASM_X86_TSC_H
-#define _ASM_X86_TSC_H
+#ifndef ASM_X86__TSC_H
+#define ASM_X86__TSC_H
 
 #include <asm/processor.h>
 
@@ -59,4 +59,4 @@ extern void check_tsc_sync_target(void);
 
 extern int notsc_setup(char *);
 
-#endif
+#endif /* ASM_X86__TSC_H */
diff --git a/include/asm-x86/types.h b/include/asm-x86/types.h
index 1ac80cd9acf8..e78b52e17444 100644
--- a/include/asm-x86/types.h
+++ b/include/asm-x86/types.h
@@ -1,5 +1,5 @@
-#ifndef _ASM_X86_TYPES_H
-#define _ASM_X86_TYPES_H
+#ifndef ASM_X86__TYPES_H
+#define ASM_X86__TYPES_H
 
 #include <asm-generic/int-ll64.h>
 
@@ -33,4 +33,4 @@ typedef u32 dma_addr_t;
 #endif /* __ASSEMBLY__ */
 #endif /* __KERNEL__ */
 
-#endif
+#endif /* ASM_X86__TYPES_H */
diff --git a/include/asm-x86/uaccess.h b/include/asm-x86/uaccess.h
index f6fa4d841bbc..48ebc0ad40ec 100644
--- a/include/asm-x86/uaccess.h
+++ b/include/asm-x86/uaccess.h
@@ -1,5 +1,5 @@
-#ifndef _ASM_UACCES_H_
-#define _ASM_UACCES_H_
+#ifndef ASM_X86__UACCESS_H
+#define ASM_X86__UACCESS_H
 /*
  * User space memory access functions
  */
@@ -450,4 +450,5 @@ extern struct movsl_mask {
 # include "uaccess_64.h"
 #endif
 
-#endif
+#endif /* ASM_X86__UACCESS_H */
+
diff --git a/include/asm-x86/uaccess_32.h b/include/asm-x86/uaccess_32.h
index 6fdef39a0bcb..6b5b57d9c6d1 100644
--- a/include/asm-x86/uaccess_32.h
+++ b/include/asm-x86/uaccess_32.h
@@ -1,5 +1,5 @@
-#ifndef __i386_UACCESS_H
-#define __i386_UACCESS_H
+#ifndef ASM_X86__UACCESS_32_H
+#define ASM_X86__UACCESS_32_H
 
 /*
  * User space memory access functions
@@ -215,4 +215,4 @@ long strnlen_user(const char __user *str, long n);
 unsigned long __must_check clear_user(void __user *mem, unsigned long len);
 unsigned long __must_check __clear_user(void __user *mem, unsigned long len);
 
-#endif /* __i386_UACCESS_H */
+#endif /* ASM_X86__UACCESS_32_H */
diff --git a/include/asm-x86/uaccess_64.h b/include/asm-x86/uaccess_64.h
index 515d4dce96b5..5cfd2951c9e7 100644
--- a/include/asm-x86/uaccess_64.h
+++ b/include/asm-x86/uaccess_64.h
@@ -1,5 +1,5 @@
-#ifndef __X86_64_UACCESS_H
-#define __X86_64_UACCESS_H
+#ifndef ASM_X86__UACCESS_64_H
+#define ASM_X86__UACCESS_64_H
 
 /*
  * User space memory access functions
@@ -198,4 +198,4 @@ static inline int __copy_from_user_inatomic_nocache(void *dst,
 unsigned long
 copy_user_handle_tail(char *to, char *from, unsigned len, unsigned zerorest);
 
-#endif /* __X86_64_UACCESS_H */
+#endif /* ASM_X86__UACCESS_64_H */
diff --git a/include/asm-x86/ucontext.h b/include/asm-x86/ucontext.h
index 50a79f7fcde9..89eaa5456a7e 100644
--- a/include/asm-x86/ucontext.h
+++ b/include/asm-x86/ucontext.h
@@ -1,5 +1,11 @@
-#ifndef _ASM_X86_UCONTEXT_H
-#define _ASM_X86_UCONTEXT_H
+#ifndef ASM_X86__UCONTEXT_H
+#define ASM_X86__UCONTEXT_H
+
+#define UC_FP_XSTATE	0x1	/* indicates the presence of extended state
+				 * information in the memory layout pointed
+				 * by the fpstate pointer in the ucontext's
+				 * sigcontext struct (uc_mcontext).
+				 */
 
 struct ucontext {
 	unsigned long	  uc_flags;
@@ -9,4 +15,4 @@ struct ucontext {
 	sigset_t	  uc_sigmask;	/* mask last for extensibility */
 };
 
-#endif /* _ASM_X86_UCONTEXT_H */
+#endif /* ASM_X86__UCONTEXT_H */
diff --git a/include/asm-x86/unaligned.h b/include/asm-x86/unaligned.h
index a7bd416b4763..59dcdec37160 100644
--- a/include/asm-x86/unaligned.h
+++ b/include/asm-x86/unaligned.h
@@ -1,5 +1,5 @@
-#ifndef _ASM_X86_UNALIGNED_H
-#define _ASM_X86_UNALIGNED_H
+#ifndef ASM_X86__UNALIGNED_H
+#define ASM_X86__UNALIGNED_H
 
 /*
  * The x86 can do unaligned accesses itself.
@@ -11,4 +11,4 @@
 #define get_unaligned __get_unaligned_le
 #define put_unaligned __put_unaligned_le
 
-#endif /* _ASM_X86_UNALIGNED_H */
+#endif /* ASM_X86__UNALIGNED_H */
diff --git a/include/asm-x86/unistd_32.h b/include/asm-x86/unistd_32.h
index d7394673b772..017f4a87c913 100644
--- a/include/asm-x86/unistd_32.h
+++ b/include/asm-x86/unistd_32.h
@@ -1,5 +1,5 @@
-#ifndef _ASM_I386_UNISTD_H_
-#define _ASM_I386_UNISTD_H_
+#ifndef ASM_X86__UNISTD_32_H
+#define ASM_X86__UNISTD_32_H
 
 /*
  * This file contains the system call numbers.
@@ -376,4 +376,4 @@
 #endif
 
 #endif /* __KERNEL__ */
-#endif /* _ASM_I386_UNISTD_H_ */
+#endif /* ASM_X86__UNISTD_32_H */
diff --git a/include/asm-x86/unistd_64.h b/include/asm-x86/unistd_64.h
index 3a341d791792..ace83f1f6787 100644
--- a/include/asm-x86/unistd_64.h
+++ b/include/asm-x86/unistd_64.h
@@ -1,5 +1,5 @@
-#ifndef _ASM_X86_64_UNISTD_H_
-#define _ASM_X86_64_UNISTD_H_
+#ifndef ASM_X86__UNISTD_64_H
+#define ASM_X86__UNISTD_64_H
 
 #ifndef __SYSCALL
 #define __SYSCALL(a, b)
@@ -690,4 +690,4 @@ __SYSCALL(__NR_inotify_init1, sys_inotify_init1)
 #define cond_syscall(x) asm(".weak\t" #x "\n\t.set\t" #x ",sys_ni_syscall")
 #endif	/* __KERNEL__ */
 
-#endif /* _ASM_X86_64_UNISTD_H_ */
+#endif /* ASM_X86__UNISTD_64_H */
diff --git a/include/asm-x86/unwind.h b/include/asm-x86/unwind.h
index 8b064bd9c553..a2151567db44 100644
--- a/include/asm-x86/unwind.h
+++ b/include/asm-x86/unwind.h
@@ -1,5 +1,5 @@
-#ifndef _ASM_X86_UNWIND_H
-#define _ASM_X86_UNWIND_H
+#ifndef ASM_X86__UNWIND_H
+#define ASM_X86__UNWIND_H
 
 #define UNW_PC(frame) ((void)(frame), 0UL)
 #define UNW_SP(frame) ((void)(frame), 0UL)
@@ -10,4 +10,4 @@ static inline int arch_unw_user_mode(const void *info)
 	return 0;
 }
 
-#endif /* _ASM_X86_UNWIND_H */
+#endif /* ASM_X86__UNWIND_H */
diff --git a/include/asm-x86/user32.h b/include/asm-x86/user32.h
index a3d910047879..aa66c1857f06 100644
--- a/include/asm-x86/user32.h
+++ b/include/asm-x86/user32.h
@@ -1,5 +1,5 @@
-#ifndef USER32_H
-#define USER32_H 1
+#ifndef ASM_X86__USER32_H
+#define ASM_X86__USER32_H
 
 /* IA32 compatible user structures for ptrace.
  * These should be used for 32bit coredumps too. */
@@ -67,4 +67,4 @@ struct user32 {
 };
 
 
-#endif
+#endif /* ASM_X86__USER32_H */
diff --git a/include/asm-x86/user_32.h b/include/asm-x86/user_32.h
index d6e51edc259d..e0fe2f55f1a6 100644
--- a/include/asm-x86/user_32.h
+++ b/include/asm-x86/user_32.h
@@ -1,5 +1,5 @@
-#ifndef _I386_USER_H
-#define _I386_USER_H
+#ifndef ASM_X86__USER_32_H
+#define ASM_X86__USER_32_H
 
 #include <asm/page.h>
 /* Core file format: The core file is written in such a way that gdb
@@ -128,4 +128,4 @@ struct user{
 #define HOST_TEXT_START_ADDR (u.start_code)
 #define HOST_STACK_END_ADDR (u.start_stack + u.u_ssize * NBPG)
 
-#endif /* _I386_USER_H */
+#endif /* ASM_X86__USER_32_H */
diff --git a/include/asm-x86/user_64.h b/include/asm-x86/user_64.h
index 6037b634c77f..38b5799863b4 100644
--- a/include/asm-x86/user_64.h
+++ b/include/asm-x86/user_64.h
@@ -1,5 +1,5 @@
-#ifndef _X86_64_USER_H
-#define _X86_64_USER_H
+#ifndef ASM_X86__USER_64_H
+#define ASM_X86__USER_64_H
 
 #include <asm/types.h>
 #include <asm/page.h>
@@ -134,4 +134,4 @@ struct user {
 #define HOST_TEXT_START_ADDR (u.start_code)
 #define HOST_STACK_END_ADDR (u.start_stack + u.u_ssize * NBPG)
 
-#endif /* _X86_64_USER_H */
+#endif /* ASM_X86__USER_64_H */
diff --git a/include/asm-x86/uv/bios.h b/include/asm-x86/uv/bios.h
index aa73362ff5df..7cd6d7ec1308 100644
--- a/include/asm-x86/uv/bios.h
+++ b/include/asm-x86/uv/bios.h
@@ -1,5 +1,5 @@
-#ifndef _ASM_X86_BIOS_H
-#define _ASM_X86_BIOS_H
+#ifndef ASM_X86__UV__BIOS_H
+#define ASM_X86__UV__BIOS_H
 
 /*
  * BIOS layer definitions.
@@ -65,4 +65,4 @@ x86_bios_freq_base(unsigned long which, unsigned long *ticks_per_second,
 		   unsigned long *drift_info);
 extern const char *x86_bios_strerror(long status);
 
-#endif /* _ASM_X86_BIOS_H */
+#endif /* ASM_X86__UV__BIOS_H */
diff --git a/include/asm-x86/uv/uv_bau.h b/include/asm-x86/uv/uv_bau.h
index 91ac0dfb7588..77153fb18f5e 100644
--- a/include/asm-x86/uv/uv_bau.h
+++ b/include/asm-x86/uv/uv_bau.h
@@ -8,8 +8,8 @@
  * Copyright (C) 2008 Silicon Graphics, Inc. All rights reserved.
  */
 
-#ifndef __ASM_X86_UV_BAU__
-#define __ASM_X86_UV_BAU__
+#ifndef ASM_X86__UV__UV_BAU_H
+#define ASM_X86__UV__UV_BAU_H
 
 #include <linux/bitmap.h>
 #define BITSPERBYTE 8
@@ -40,11 +40,6 @@
 #define UV_ACTIVATION_DESCRIPTOR_SIZE	32
 #define UV_DISTRIBUTION_SIZE		256
 #define UV_SW_ACK_NPENDING		8
-#define UV_BAU_MESSAGE			200
-/*
- * Messaging irq; see irq_64.h and include/asm-x86/hw_irq_64.h
- * To be dynamically allocated in the future
- */
 #define UV_NET_ENDPOINT_INTD		0x38
 #define UV_DESC_BASE_PNODE_SHIFT	49
 #define UV_PAYLOADQ_PNODE_SHIFT		49
@@ -334,4 +329,4 @@ extern int uv_flush_tlb_others(cpumask_t *, struct mm_struct *, unsigned long);
 extern void uv_bau_message_intr1(void);
 extern void uv_bau_timeout_intr1(void);
 
-#endif /* __ASM_X86_UV_BAU__ */
+#endif /* ASM_X86__UV__UV_BAU_H */
diff --git a/include/asm-x86/uv/uv_hub.h b/include/asm-x86/uv/uv_hub.h
index a4ef26e5850b..bdb5b01afbf5 100644
--- a/include/asm-x86/uv/uv_hub.h
+++ b/include/asm-x86/uv/uv_hub.h
@@ -8,8 +8,8 @@
  * Copyright (C) 2007-2008 Silicon Graphics, Inc. All rights reserved.
  */
 
-#ifndef __ASM_X86_UV_HUB_H__
-#define __ASM_X86_UV_HUB_H__
+#ifndef ASM_X86__UV__UV_HUB_H
+#define ASM_X86__UV__UV_HUB_H
 
 #include <linux/numa.h>
 #include <linux/percpu.h>
@@ -350,5 +350,5 @@ static inline int uv_num_possible_blades(void)
 	return uv_possible_blades;
 }
 
-#endif /* __ASM_X86_UV_HUB__ */
+#endif /* ASM_X86__UV__UV_HUB_H */
 
diff --git a/include/asm-x86/uv/uv_mmrs.h b/include/asm-x86/uv/uv_mmrs.h
index 151fd7fcb809..8b03d89d2459 100644
--- a/include/asm-x86/uv/uv_mmrs.h
+++ b/include/asm-x86/uv/uv_mmrs.h
@@ -8,8 +8,8 @@
  * Copyright (C) 2007-2008 Silicon Graphics, Inc. All rights reserved.
  */
 
-#ifndef __ASM_X86_UV_MMRS__
-#define __ASM_X86_UV_MMRS__
+#ifndef ASM_X86__UV__UV_MMRS_H
+#define ASM_X86__UV__UV_MMRS_H
 
 #define UV_MMR_ENABLE		(1UL << 63)
 
@@ -1292,4 +1292,4 @@ union uvh_si_alias2_overlay_config_u {
 };
 
 
-#endif /* __ASM_X86_UV_MMRS__ */
+#endif /* ASM_X86__UV__UV_MMRS_H */
diff --git a/include/asm-x86/vdso.h b/include/asm-x86/vdso.h
index 8e18fb80f5e6..4ab320913ea3 100644
--- a/include/asm-x86/vdso.h
+++ b/include/asm-x86/vdso.h
@@ -1,5 +1,5 @@
-#ifndef _ASM_X86_VDSO_H
-#define _ASM_X86_VDSO_H	1
+#ifndef ASM_X86__VDSO_H
+#define ASM_X86__VDSO_H
 
 #ifdef CONFIG_X86_64
 extern const char VDSO64_PRELINK[];
@@ -44,4 +44,4 @@ extern const char vdso32_int80_start, vdso32_int80_end;
 extern const char vdso32_syscall_start, vdso32_syscall_end;
 extern const char vdso32_sysenter_start, vdso32_sysenter_end;
 
-#endif	/* asm-x86/vdso.h */
+#endif /* ASM_X86__VDSO_H */
diff --git a/include/asm-x86/vga.h b/include/asm-x86/vga.h
index 0ccf804377e6..b9e493d07d07 100644
--- a/include/asm-x86/vga.h
+++ b/include/asm-x86/vga.h
@@ -4,8 +4,8 @@
  *	(c) 1998 Martin Mares <mj@ucw.cz>
  */
 
-#ifndef _LINUX_ASM_VGA_H_
-#define _LINUX_ASM_VGA_H_
+#ifndef ASM_X86__VGA_H
+#define ASM_X86__VGA_H
 
 /*
  *	On the PC, we can just recalculate addresses and then
@@ -17,4 +17,4 @@
 #define vga_readb(x) (*(x))
 #define vga_writeb(x, y) (*(y) = (x))
 
-#endif
+#endif /* ASM_X86__VGA_H */
diff --git a/include/asm-x86/vgtod.h b/include/asm-x86/vgtod.h
index 3301f0929342..38fd13364021 100644
--- a/include/asm-x86/vgtod.h
+++ b/include/asm-x86/vgtod.h
@@ -1,5 +1,5 @@
-#ifndef _ASM_VGTOD_H
-#define _ASM_VGTOD_H 1
+#ifndef ASM_X86__VGTOD_H
+#define ASM_X86__VGTOD_H
 
 #include <asm/vsyscall.h>
 #include <linux/clocksource.h>
@@ -26,4 +26,4 @@ extern struct vsyscall_gtod_data __vsyscall_gtod_data
 __section_vsyscall_gtod_data;
 extern struct vsyscall_gtod_data vsyscall_gtod_data;
 
-#endif
+#endif /* ASM_X86__VGTOD_H */
diff --git a/include/asm-x86/visws/cobalt.h b/include/asm-x86/visws/cobalt.h
index 995258831b7f..9627a8fe84e9 100644
--- a/include/asm-x86/visws/cobalt.h
+++ b/include/asm-x86/visws/cobalt.h
@@ -1,5 +1,5 @@
-#ifndef __I386_SGI_COBALT_H
-#define __I386_SGI_COBALT_H
+#ifndef ASM_X86__VISWS__COBALT_H
+#define ASM_X86__VISWS__COBALT_H
 
 #include <asm/fixmap.h>
 
@@ -122,4 +122,4 @@ extern char visws_board_type;
 
 extern char visws_board_rev;
 
-#endif /* __I386_SGI_COBALT_H */
+#endif /* ASM_X86__VISWS__COBALT_H */
diff --git a/include/asm-x86/visws/lithium.h b/include/asm-x86/visws/lithium.h
index dfcd4f07ab85..b36d3b378c63 100644
--- a/include/asm-x86/visws/lithium.h
+++ b/include/asm-x86/visws/lithium.h
@@ -1,5 +1,5 @@
-#ifndef __I386_SGI_LITHIUM_H
-#define __I386_SGI_LITHIUM_H
+#ifndef ASM_X86__VISWS__LITHIUM_H
+#define ASM_X86__VISWS__LITHIUM_H
 
 #include <asm/fixmap.h>
 
@@ -49,5 +49,5 @@ static inline unsigned short li_pcib_read16(unsigned long reg)
 	return *((volatile unsigned short *)(LI_PCIB_VADDR+reg));
 }
 
-#endif
+#endif /* ASM_X86__VISWS__LITHIUM_H */
 
diff --git a/include/asm-x86/visws/piix4.h b/include/asm-x86/visws/piix4.h
index 83ea4f46e419..61c938045ec9 100644
--- a/include/asm-x86/visws/piix4.h
+++ b/include/asm-x86/visws/piix4.h
@@ -1,5 +1,5 @@
-#ifndef __I386_SGI_PIIX_H
-#define __I386_SGI_PIIX_H
+#ifndef ASM_X86__VISWS__PIIX4_H
+#define ASM_X86__VISWS__PIIX4_H
 
 /*
  * PIIX4 as used on SGI Visual Workstations
@@ -104,4 +104,4 @@
  */
 #define	PIIX_GPI_STPCLK		0x4	// STPCLK signal routed back in
 
-#endif
+#endif /* ASM_X86__VISWS__PIIX4_H */
diff --git a/include/asm-x86/vm86.h b/include/asm-x86/vm86.h
index 5ce351325e01..998bd18eb737 100644
--- a/include/asm-x86/vm86.h
+++ b/include/asm-x86/vm86.h
@@ -1,5 +1,5 @@
-#ifndef _LINUX_VM86_H
-#define _LINUX_VM86_H
+#ifndef ASM_X86__VM86_H
+#define ASM_X86__VM86_H
 
 /*
  * I'm guessing at the VIF/VIP flag usage, but hope that this is how
@@ -205,4 +205,4 @@ static inline int handle_vm86_trap(struct kernel_vm86_regs *a, long b, int c)
 
 #endif /* __KERNEL__ */
 
-#endif
+#endif /* ASM_X86__VM86_H */
diff --git a/include/asm-x86/vmi_time.h b/include/asm-x86/vmi_time.h
index c3118c385156..b2d39e6a08b7 100644
--- a/include/asm-x86/vmi_time.h
+++ b/include/asm-x86/vmi_time.h
@@ -22,8 +22,8 @@
  *
  */
 
-#ifndef __VMI_TIME_H
-#define __VMI_TIME_H
+#ifndef ASM_X86__VMI_TIME_H
+#define ASM_X86__VMI_TIME_H
 
 /*
  * Raw VMI call indices for timer functions
@@ -95,4 +95,4 @@ extern void __devinit vmi_time_ap_init(void);
 
 #define CONFIG_VMI_ALARM_HZ	100
 
-#endif
+#endif /* ASM_X86__VMI_TIME_H */
diff --git a/include/asm-x86/vsyscall.h b/include/asm-x86/vsyscall.h
index 6b66ff905af0..dcd4682413de 100644
--- a/include/asm-x86/vsyscall.h
+++ b/include/asm-x86/vsyscall.h
@@ -1,5 +1,5 @@
-#ifndef _ASM_X86_64_VSYSCALL_H_
-#define _ASM_X86_64_VSYSCALL_H_
+#ifndef ASM_X86__VSYSCALL_H
+#define ASM_X86__VSYSCALL_H
 
 enum vsyscall_num {
 	__NR_vgettimeofday,
@@ -41,4 +41,4 @@ extern void map_vsyscall(void);
 
 #endif /* __KERNEL__ */
 
-#endif /* _ASM_X86_64_VSYSCALL_H_ */
+#endif /* ASM_X86__VSYSCALL_H */
diff --git a/include/asm-x86/xcr.h b/include/asm-x86/xcr.h
new file mode 100644
index 000000000000..f2cba4e79a23
--- /dev/null
+++ b/include/asm-x86/xcr.h
@@ -0,0 +1,49 @@
+/* -*- linux-c -*- ------------------------------------------------------- *
+ *
+ *   Copyright 2008 rPath, Inc. - All Rights Reserved
+ *
+ *   This file is part of the Linux kernel, and is made available under
+ *   the terms of the GNU General Public License version 2 or (at your
+ *   option) any later version; incorporated herein by reference.
+ *
+ * ----------------------------------------------------------------------- */
+
+/*
+ * asm-x86/xcr.h
+ *
+ * Definitions for the eXtended Control Register instructions
+ */
+
+#ifndef _ASM_X86_XCR_H
+#define _ASM_X86_XCR_H
+
+#define XCR_XFEATURE_ENABLED_MASK	0x00000000
+
+#ifdef __KERNEL__
+# ifndef __ASSEMBLY__
+
+#include <linux/types.h>
+
+static inline u64 xgetbv(u32 index)
+{
+	u32 eax, edx;
+
+	asm volatile(".byte 0x0f,0x01,0xd0" /* xgetbv */
+		     : "=a" (eax), "=d" (edx)
+		     : "c" (index));
+	return eax + ((u64)edx << 32);
+}
+
+static inline void xsetbv(u32 index, u64 value)
+{
+	u32 eax = value;
+	u32 edx = value >> 32;
+
+	asm volatile(".byte 0x0f,0x01,0xd1" /* xsetbv */
+		     : : "a" (eax), "d" (edx), "c" (index));
+}
+
+# endif /* __ASSEMBLY__ */
+#endif /* __KERNEL__ */
+
+#endif /* _ASM_X86_XCR_H */
diff --git a/include/asm-x86/xen/events.h b/include/asm-x86/xen/events.h
index 8ded74720024..8151f5b8b6cb 100644
--- a/include/asm-x86/xen/events.h
+++ b/include/asm-x86/xen/events.h
@@ -1,5 +1,5 @@
-#ifndef __XEN_EVENTS_H
-#define __XEN_EVENTS_H
+#ifndef ASM_X86__XEN__EVENTS_H
+#define ASM_X86__XEN__EVENTS_H
 
 enum ipi_vector {
 	XEN_RESCHEDULE_VECTOR,
@@ -21,4 +21,4 @@ static inline void xen_do_IRQ(int irq, struct pt_regs *regs)
 	do_IRQ(regs);
 }
 
-#endif /* __XEN_EVENTS_H */
+#endif /* ASM_X86__XEN__EVENTS_H */
diff --git a/include/asm-x86/xen/grant_table.h b/include/asm-x86/xen/grant_table.h
index 2444d4593a3b..c4baab4d2b68 100644
--- a/include/asm-x86/xen/grant_table.h
+++ b/include/asm-x86/xen/grant_table.h
@@ -1,7 +1,7 @@
-#ifndef __XEN_GRANT_TABLE_H
-#define __XEN_GRANT_TABLE_H
+#ifndef ASM_X86__XEN__GRANT_TABLE_H
+#define ASM_X86__XEN__GRANT_TABLE_H
 
 #define xen_alloc_vm_area(size)	alloc_vm_area(size)
 #define xen_free_vm_area(area)	free_vm_area(area)
 
-#endif /* __XEN_GRANT_TABLE_H */
+#endif /* ASM_X86__XEN__GRANT_TABLE_H */
diff --git a/include/asm-x86/xen/hypercall.h b/include/asm-x86/xen/hypercall.h
index 91cb7fd5c123..44f4259bee3f 100644
--- a/include/asm-x86/xen/hypercall.h
+++ b/include/asm-x86/xen/hypercall.h
@@ -30,8 +30,8 @@
  * IN THE SOFTWARE.
  */
 
-#ifndef __HYPERCALL_H__
-#define __HYPERCALL_H__
+#ifndef ASM_X86__XEN__HYPERCALL_H
+#define ASM_X86__XEN__HYPERCALL_H
 
 #include <linux/errno.h>
 #include <linux/string.h>
@@ -524,4 +524,4 @@ MULTI_stack_switch(struct multicall_entry *mcl,
 	mcl->args[1] = esp;
 }
 
-#endif /* __HYPERCALL_H__ */
+#endif /* ASM_X86__XEN__HYPERCALL_H */
diff --git a/include/asm-x86/xen/hypervisor.h b/include/asm-x86/xen/hypervisor.h
index 8e15dd28c91f..0ef3a88b869d 100644
--- a/include/asm-x86/xen/hypervisor.h
+++ b/include/asm-x86/xen/hypervisor.h
@@ -30,12 +30,11 @@
  * IN THE SOFTWARE.
  */
 
-#ifndef __HYPERVISOR_H__
-#define __HYPERVISOR_H__
+#ifndef ASM_X86__XEN__HYPERVISOR_H
+#define ASM_X86__XEN__HYPERVISOR_H
 
 #include <linux/types.h>
 #include <linux/kernel.h>
-#include <linux/version.h>
 
 #include <xen/interface/xen.h>
 #include <xen/interface/version.h>
@@ -70,4 +69,4 @@ u64 jiffies_to_st(unsigned long jiffies);
 
 #define is_running_on_xen()	(xen_start_info ? 1 : 0)
 
-#endif /* __HYPERVISOR_H__ */
+#endif /* ASM_X86__XEN__HYPERVISOR_H */
diff --git a/include/asm-x86/xen/interface.h b/include/asm-x86/xen/interface.h
index 9d810f2538a2..d077bba96da9 100644
--- a/include/asm-x86/xen/interface.h
+++ b/include/asm-x86/xen/interface.h
@@ -6,8 +6,8 @@
  * Copyright (c) 2004, K A Fraser
  */
 
-#ifndef __ASM_X86_XEN_INTERFACE_H
-#define __ASM_X86_XEN_INTERFACE_H
+#ifndef ASM_X86__XEN__INTERFACE_H
+#define ASM_X86__XEN__INTERFACE_H
 
 #ifdef __XEN__
 #define __DEFINE_GUEST_HANDLE(name, type) \
@@ -172,4 +172,4 @@ DEFINE_GUEST_HANDLE_STRUCT(vcpu_guest_context);
 #define XEN_CPUID          XEN_EMULATE_PREFIX "cpuid"
 #endif
 
-#endif	/* __ASM_X86_XEN_INTERFACE_H */
+#endif /* ASM_X86__XEN__INTERFACE_H */
diff --git a/include/asm-x86/xen/interface_32.h b/include/asm-x86/xen/interface_32.h
index d8ac41d5db86..08167e19fc66 100644
--- a/include/asm-x86/xen/interface_32.h
+++ b/include/asm-x86/xen/interface_32.h
@@ -6,8 +6,8 @@
  * Copyright (c) 2004, K A Fraser
  */
 
-#ifndef __ASM_X86_XEN_INTERFACE_32_H
-#define __ASM_X86_XEN_INTERFACE_32_H
+#ifndef ASM_X86__XEN__INTERFACE_32_H
+#define ASM_X86__XEN__INTERFACE_32_H
 
 
 /*
@@ -94,4 +94,4 @@ typedef struct xen_callback xen_callback_t;
 #define xen_pfn_to_cr3(pfn) (((unsigned)(pfn) << 12) | ((unsigned)(pfn) >> 20))
 #define xen_cr3_to_pfn(cr3) (((unsigned)(cr3) >> 12) | ((unsigned)(cr3) << 20))
 
-#endif	/* __ASM_X86_XEN_INTERFACE_32_H */
+#endif /* ASM_X86__XEN__INTERFACE_32_H */
diff --git a/include/asm-x86/xen/interface_64.h b/include/asm-x86/xen/interface_64.h
index 842266ce96e6..046c0f1e01d4 100644
--- a/include/asm-x86/xen/interface_64.h
+++ b/include/asm-x86/xen/interface_64.h
@@ -1,5 +1,5 @@
-#ifndef __ASM_X86_XEN_INTERFACE_64_H
-#define __ASM_X86_XEN_INTERFACE_64_H
+#ifndef ASM_X86__XEN__INTERFACE_64_H
+#define ASM_X86__XEN__INTERFACE_64_H
 
 /*
  * 64-bit segment selectors
@@ -156,4 +156,4 @@ typedef unsigned long xen_callback_t;
 #endif /* !__ASSEMBLY__ */
 
 
-#endif	/* __ASM_X86_XEN_INTERFACE_64_H */
+#endif /* ASM_X86__XEN__INTERFACE_64_H */
diff --git a/include/asm-x86/xen/page.h b/include/asm-x86/xen/page.h
index 7b3835d3b77d..c50185dccec1 100644
--- a/include/asm-x86/xen/page.h
+++ b/include/asm-x86/xen/page.h
@@ -1,5 +1,5 @@
-#ifndef __XEN_PAGE_H
-#define __XEN_PAGE_H
+#ifndef ASM_X86__XEN__PAGE_H
+#define ASM_X86__XEN__PAGE_H
 
 #include <linux/pfn.h>
 
@@ -162,4 +162,4 @@ xmaddr_t arbitrary_virt_to_machine(void *address);
 void make_lowmem_page_readonly(void *vaddr);
 void make_lowmem_page_readwrite(void *vaddr);
 
-#endif /* __XEN_PAGE_H */
+#endif /* ASM_X86__XEN__PAGE_H */
diff --git a/include/asm-x86/xsave.h b/include/asm-x86/xsave.h
new file mode 100644
index 000000000000..08e9a1ac07a9
--- /dev/null
+++ b/include/asm-x86/xsave.h
@@ -0,0 +1,118 @@
+#ifndef __ASM_X86_XSAVE_H
+#define __ASM_X86_XSAVE_H
+
+#include <linux/types.h>
+#include <asm/processor.h>
+#include <asm/i387.h>
+
+#define XSTATE_FP	0x1
+#define XSTATE_SSE	0x2
+
+#define XSTATE_FPSSE	(XSTATE_FP | XSTATE_SSE)
+
+#define FXSAVE_SIZE	512
+
+/*
+ * These are the features that the OS can handle currently.
+ */
+#define XCNTXT_MASK	(XSTATE_FP | XSTATE_SSE)
+
+#ifdef CONFIG_X86_64
+#define REX_PREFIX	"0x48, "
+#else
+#define REX_PREFIX
+#endif
+
+extern unsigned int xstate_size;
+extern u64 pcntxt_mask;
+extern struct xsave_struct *init_xstate_buf;
+
+extern void xsave_cntxt_init(void);
+extern void xsave_init(void);
+extern int init_fpu(struct task_struct *child);
+extern int check_for_xstate(struct i387_fxsave_struct __user *buf,
+			    void __user *fpstate,
+			    struct _fpx_sw_bytes *sw);
+
+static inline int xrstor_checking(struct xsave_struct *fx)
+{
+	int err;
+
+	asm volatile("1: .byte " REX_PREFIX "0x0f,0xae,0x2f\n\t"
+		     "2:\n"
+		     ".section .fixup,\"ax\"\n"
+		     "3:  movl $-1,%[err]\n"
+		     "    jmp  2b\n"
+		     ".previous\n"
+		     _ASM_EXTABLE(1b, 3b)
+		     : [err] "=r" (err)
+		     : "D" (fx), "m" (*fx), "a" (-1), "d" (-1), "0" (0)
+		     : "memory");
+
+	return err;
+}
+
+static inline int xsave_user(struct xsave_struct __user *buf)
+{
+	int err;
+	__asm__ __volatile__("1: .byte " REX_PREFIX "0x0f,0xae,0x27\n"
+			     "2:\n"
+			     ".section .fixup,\"ax\"\n"
+			     "3:  movl $-1,%[err]\n"
+			     "    jmp  2b\n"
+			     ".previous\n"
+			     ".section __ex_table,\"a\"\n"
+			     _ASM_ALIGN "\n"
+			     _ASM_PTR "1b,3b\n"
+			     ".previous"
+			     : [err] "=r" (err)
+			     : "D" (buf), "a" (-1), "d" (-1), "0" (0)
+			     : "memory");
+	if (unlikely(err) && __clear_user(buf, xstate_size))
+		err = -EFAULT;
+	/* No need to clear here because the caller clears USED_MATH */
+	return err;
+}
+
+static inline int xrestore_user(struct xsave_struct __user *buf, u64 mask)
+{
+	int err;
+	struct xsave_struct *xstate = ((__force struct xsave_struct *)buf);
+	u32 lmask = mask;
+	u32 hmask = mask >> 32;
+
+	__asm__ __volatile__("1: .byte " REX_PREFIX "0x0f,0xae,0x2f\n"
+			     "2:\n"
+			     ".section .fixup,\"ax\"\n"
+			     "3:  movl $-1,%[err]\n"
+			     "    jmp  2b\n"
+			     ".previous\n"
+			     ".section __ex_table,\"a\"\n"
+			     _ASM_ALIGN "\n"
+			     _ASM_PTR "1b,3b\n"
+			     ".previous"
+			     : [err] "=r" (err)
+			     : "D" (xstate), "a" (lmask), "d" (hmask), "0" (0)
+			     : "memory");	/* memory required? */
+	return err;
+}
+
+static inline void xrstor_state(struct xsave_struct *fx, u64 mask)
+{
+	u32 lmask = mask;
+	u32 hmask = mask >> 32;
+
+	asm volatile(".byte " REX_PREFIX "0x0f,0xae,0x2f\n\t"
+		     : : "D" (fx), "m" (*fx), "a" (lmask), "d" (hmask)
+		     :   "memory");
+}
+
+static inline void xsave(struct task_struct *tsk)
+{
+	/* This, however, we can work around by forcing the compiler to select
+	   an addressing mode that doesn't require extended registers. */
+	__asm__ __volatile__(".byte " REX_PREFIX "0x0f,0xae,0x27"
+			     : : "D" (&(tsk->thread.xstate->xsave)),
+				 "a" (-1), "d"(-1) : "memory");
+}
+#endif
diff --git a/include/asm-xtensa/dma-mapping.h b/include/asm-xtensa/dma-mapping.h
index 3c7d537dd15d..51882ae3db4d 100644
--- a/include/asm-xtensa/dma-mapping.h
+++ b/include/asm-xtensa/dma-mapping.h
@@ -139,7 +139,7 @@ dma_sync_sg_for_device(struct device *dev, struct scatterlist *sg, int nelems,
 		consistent_sync(sg_virt(sg), sg->length, dir);
 }
 static inline int
-dma_mapping_error(dma_addr_t dma_addr)
+dma_mapping_error(struct device *dev, dma_addr_t dma_addr)
 {
 	return 0;
 }
diff --git a/include/asm-xtensa/kvm.h b/include/asm-xtensa/kvm.h
deleted file mode 100644
index bda4e331e98c..000000000000
--- a/include/asm-xtensa/kvm.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef __LINUX_KVM_XTENSA_H
-#define __LINUX_KVM_XTENSA_H
-
-/* xtensa does not support KVM */
-
-#endif
diff --git a/include/asm-xtensa/namei.h b/include/asm-xtensa/namei.h
deleted file mode 100644
index 3fdff039d27d..000000000000
--- a/include/asm-xtensa/namei.h
+++ /dev/null
@@ -1,26 +0,0 @@
-/*
- * include/asm-xtensa/namei.h
- *
- * Included from linux/fs/namei.c
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 2001 - 2005 Tensilica Inc.
- */
-
-#ifndef _XTENSA_NAMEI_H
-#define _XTENSA_NAMEI_H
-
-#ifdef __KERNEL__
-
-/* This dummy routine maybe changed to something useful
- * for /usr/gnemul/ emulation stuff.
- * Look at asm-sparc/namei.h for details.
- */
-
-#define __emul_prefix() NULL
-
-#endif	/* __KERNEL__ */
-#endif	/* _XTENSA_NAMEI_H */
diff --git a/include/asm-xtensa/ptrace.h b/include/asm-xtensa/ptrace.h
index 422c73e26937..089b0db44816 100644
--- a/include/asm-xtensa/ptrace.h
+++ b/include/asm-xtensa/ptrace.h
@@ -73,10 +73,10 @@
 #define PTRACE_GETXTREGS	18
 #define PTRACE_SETXTREGS	19
 
-#ifndef __ASSEMBLY__
-
 #ifdef __KERNEL__
 
+#ifndef __ASSEMBLY__
+
 /*
  * This struct defines the way the registers are stored on the
  * kernel stack during a system call or other kernel entry.
@@ -122,14 +122,14 @@ extern void show_regs(struct pt_regs *);
 # ifndef CONFIG_SMP
 #  define profile_pc(regs) instruction_pointer(regs)
 # endif
-#endif /* __KERNEL__ */
 
 #else	/* __ASSEMBLY__ */
 
-#ifdef __KERNEL__
 # include <asm/asm-offsets.h>
 #define PT_REGS_OFFSET	  (KERNEL_STACK_SIZE - PT_USER_SIZE)
-#endif
 
 #endif	/* !__ASSEMBLY__ */
+
+#endif  /* __KERNEL__ */
+
 #endif	/* _XTENSA_PTRACE_H */
diff --git a/include/asm-xtensa/thread_info.h b/include/asm-xtensa/thread_info.h
index a2c640682ed9..7e4131dd546c 100644
--- a/include/asm-xtensa/thread_info.h
+++ b/include/asm-xtensa/thread_info.h
@@ -111,10 +111,6 @@ static inline struct thread_info *current_thread_info(void)
 	return ti;
 }
 
-/* thread information allocation */
-#define alloc_thread_info(tsk) ((struct thread_info *) __get_free_pages(GFP_KERNEL,1))
-#define free_thread_info(ti) free_pages((unsigned long) (ti), 1)
-
 #else /* !__ASSEMBLY__ */
 
 /* how to get the thread information struct from ASM */
@@ -160,6 +156,7 @@ static inline struct thread_info *current_thread_info(void)
 #define TS_USEDFPU		0x0001	/* FPU was used by this task this quantum (SMP) */
 
 #define THREAD_SIZE 8192	//(2*PAGE_SIZE)
+#define THREAD_SIZE_ORDER 1
 
 #endif	/* __KERNEL__ */
 #endif	/* _XTENSA_THREAD_INFO */
diff --git a/include/crypto/hash.h b/include/crypto/hash.h
index d12498ec8a4e..ee48ef8fb2ea 100644
--- a/include/crypto/hash.h
+++ b/include/crypto/hash.h
@@ -101,6 +101,24 @@ static inline int crypto_ahash_digest(struct ahash_request *req)
 	return crt->digest(req);
 }
 
+static inline int crypto_ahash_init(struct ahash_request *req)
+{
+	struct ahash_tfm *crt = crypto_ahash_crt(crypto_ahash_reqtfm(req));
+	return crt->init(req);
+}
+
+static inline int crypto_ahash_update(struct ahash_request *req)
+{
+	struct ahash_tfm *crt = crypto_ahash_crt(crypto_ahash_reqtfm(req));
+	return crt->update(req);
+}
+
+static inline int crypto_ahash_final(struct ahash_request *req)
+{
+	struct ahash_tfm *crt = crypto_ahash_crt(crypto_ahash_reqtfm(req));
+	return crt->final(req);
+}
+
 static inline void ahash_request_set_tfm(struct ahash_request *req,
 					 struct crypto_ahash *tfm)
 {
diff --git a/include/linux/Kbuild b/include/linux/Kbuild
index 71d70d1fbce2..59391250d51c 100644
--- a/include/linux/Kbuild
+++ b/include/linux/Kbuild
@@ -97,6 +97,7 @@ header-y += ioctl.h
 header-y += ip6_tunnel.h
 header-y += ipmi_msgdefs.h
 header-y += ipsec.h
+header-y += ip_vs.h
 header-y += ipx.h
 header-y += irda.h
 header-y += iso_fs.h
@@ -189,7 +190,6 @@ unifdef-y += connector.h
 unifdef-y += cuda.h
 unifdef-y += cyclades.h
 unifdef-y += dccp.h
-unifdef-y += dirent.h
 unifdef-y += dlm.h
 unifdef-y += dlm_plock.h
 unifdef-y += edd.h
@@ -250,13 +250,17 @@ unifdef-y += isdn.h
 unifdef-y += isdnif.h
 unifdef-y += isdn_divertif.h
 unifdef-y += isdn_ppp.h
+unifdef-y += ivtv.h
+unifdef-y += ivtvfb.h
 unifdef-y += joystick.h
 unifdef-y += kdev_t.h
 unifdef-y += kd.h
 unifdef-y += kernelcapi.h
 unifdef-y += kernel.h
 unifdef-y += keyboard.h
+ifneq ($(wildcard $(srctree)/include/asm-$(SRCARCH)/kvm.h),)
 unifdef-y += kvm.h
+endif
 unifdef-y += llc.h
 unifdef-y += loop.h
 unifdef-y += lp.h
@@ -293,7 +297,6 @@ unifdef-y += parport.h
 unifdef-y += patchkey.h
 unifdef-y += pci.h
 unifdef-y += personality.h
-unifdef-y += pim.h
 unifdef-y += pktcdvd.h
 unifdef-y += pmu.h
 unifdef-y += poll.h
@@ -354,6 +357,7 @@ unifdef-y += virtio_balloon.h
 unifdef-y += virtio_console.h
 unifdef-y += virtio_pci.h
 unifdef-y += virtio_ring.h
+unifdef-y += virtio_rng.h
 unifdef-y += vt.h
 unifdef-y += wait.h
 unifdef-y += wanrouter.h
diff --git a/include/linux/acct.h b/include/linux/acct.h
index e8cae54e8d88..882dc7248766 100644
--- a/include/linux/acct.h
+++ b/include/linux/acct.h
@@ -120,17 +120,20 @@ struct acct_v3
 struct vfsmount;
 struct super_block;
 struct pacct_struct;
+struct pid_namespace;
 extern void acct_auto_close_mnt(struct vfsmount *m);
 extern void acct_auto_close(struct super_block *sb);
 extern void acct_init_pacct(struct pacct_struct *pacct);
 extern void acct_collect(long exitcode, int group_dead);
 extern void acct_process(void);
+extern void acct_exit_ns(struct pid_namespace *);
 #else
 #define acct_auto_close_mnt(x)	do { } while (0)
 #define acct_auto_close(x)	do { } while (0)
 #define acct_init_pacct(x)	do { } while (0)
 #define acct_collect(x,y)	do { } while (0)
 #define acct_process()		do { } while (0)
+#define acct_exit_ns(ns)	do { } while (0)
 #endif
 
 /*
diff --git a/include/linux/agp_backend.h b/include/linux/agp_backend.h
index 972b12bcfb36..2b8df8b420fd 100644
--- a/include/linux/agp_backend.h
+++ b/include/linux/agp_backend.h
@@ -30,6 +30,8 @@
 #ifndef _AGP_BACKEND_H
 #define _AGP_BACKEND_H 1
 
+#include <linux/list.h>
+
 enum chipset_type {
 	NOT_SUPPORTED,
 	SUPPORTED,
@@ -78,6 +80,8 @@ struct agp_memory {
 	bool is_bound;
 	bool is_flushed;
         bool vmalloc_flag;
+	/* list of agp_memory mapped to the aperture */
+	struct list_head mapped_list;
 };
 
 #define AGP_NORMAL_MEMORY 0
@@ -96,6 +100,7 @@ extern struct agp_memory *agp_allocate_memory(struct agp_bridge_data *, size_t,
 extern int agp_copy_info(struct agp_bridge_data *, struct agp_kern_info *);
 extern int agp_bind_memory(struct agp_memory *, off_t);
 extern int agp_unbind_memory(struct agp_memory *);
+extern int agp_rebind_memory(void);
 extern void agp_enable(struct agp_bridge_data *, u32);
 extern struct agp_bridge_data *agp_backend_acquire(struct pci_dev *);
 extern void agp_backend_release(struct agp_bridge_data *);
diff --git a/include/linux/aio.h b/include/linux/aio.h
index b51ddd28444e..09b276c35227 100644
--- a/include/linux/aio.h
+++ b/include/linux/aio.h
@@ -7,7 +7,6 @@
 #include <linux/uio.h>
 
 #include <asm/atomic.h>
-#include <linux/uio.h>
 
 #define AIO_MAXSEGS		4
 #define AIO_KIOGRP_NR_ATOMIC	8
diff --git a/include/linux/ata.h b/include/linux/ata.h
index 1c622e2b0504..1ce19c1ef0e9 100644
--- a/include/linux/ata.h
+++ b/include/linux/ata.h
@@ -46,18 +46,48 @@ enum {
 	ATA_MAX_SECTORS_TAPE	= 65535,
 
 	ATA_ID_WORDS		= 256,
+	ATA_ID_CONFIG		= 0,
+	ATA_ID_CYLS		= 1,
+	ATA_ID_HEADS		= 3,
+	ATA_ID_SECTORS		= 6,
 	ATA_ID_SERNO		= 10,
+	ATA_ID_BUF_SIZE		= 21,
 	ATA_ID_FW_REV		= 23,
 	ATA_ID_PROD		= 27,
+	ATA_ID_MAX_MULTSECT	= 47,
+	ATA_ID_DWORD_IO		= 48,
+	ATA_ID_CAPABILITY	= 49,
 	ATA_ID_OLD_PIO_MODES	= 51,
+	ATA_ID_OLD_DMA_MODES	= 52,
 	ATA_ID_FIELD_VALID	= 53,
+	ATA_ID_CUR_CYLS		= 54,
+	ATA_ID_CUR_HEADS	= 55,
+	ATA_ID_CUR_SECTORS	= 56,
+	ATA_ID_MULTSECT		= 59,
+	ATA_ID_LBA_CAPACITY	= 60,
+	ATA_ID_SWDMA_MODES	= 62,
 	ATA_ID_MWDMA_MODES	= 63,
 	ATA_ID_PIO_MODES	= 64,
 	ATA_ID_EIDE_DMA_MIN	= 65,
+	ATA_ID_EIDE_DMA_TIME	= 66,
 	ATA_ID_EIDE_PIO		= 67,
 	ATA_ID_EIDE_PIO_IORDY	= 68,
-	ATA_ID_UDMA_MODES	= 88,
+	ATA_ID_QUEUE_DEPTH	= 75,
 	ATA_ID_MAJOR_VER	= 80,
+	ATA_ID_COMMAND_SET_1	= 82,
+	ATA_ID_COMMAND_SET_2	= 83,
+	ATA_ID_CFSSE		= 84,
+	ATA_ID_CFS_ENABLE_1	= 85,
+	ATA_ID_CFS_ENABLE_2	= 86,
+	ATA_ID_CSF_DEFAULT	= 87,
+	ATA_ID_UDMA_MODES	= 88,
+	ATA_ID_HW_CONFIG	= 93,
+	ATA_ID_SPG		= 98,
+	ATA_ID_LBA_CAPACITY_2	= 100,
+	ATA_ID_LAST_LUN		= 126,
+	ATA_ID_DLF		= 128,
+	ATA_ID_CSFO		= 129,
+	ATA_ID_CFA_POWER	= 160,
 	ATA_ID_PIO4		= (1 << 1),
 
 	ATA_ID_SERNO_LEN	= 20,
@@ -123,13 +153,26 @@ enum {
 	ATA_BUSY		= (1 << 7),	/* BSY status bit */
 	ATA_DRDY		= (1 << 6),	/* device ready */
 	ATA_DF			= (1 << 5),	/* device fault */
+	ATA_DSC			= (1 << 4),	/* drive seek complete */
 	ATA_DRQ			= (1 << 3),	/* data request i/o */
+	ATA_CORR		= (1 << 2),	/* corrected data error */
+	ATA_IDX			= (1 << 1),	/* index */
 	ATA_ERR			= (1 << 0),	/* have an error */
 	ATA_SRST		= (1 << 2),	/* software reset */
 	ATA_ICRC		= (1 << 7),	/* interface CRC error */
+	ATA_BBK			= ATA_ICRC,	/* pre-EIDE: block marked bad */
 	ATA_UNC			= (1 << 6),	/* uncorrectable media error */
+	ATA_MC			= (1 << 5),	/* media changed */
 	ATA_IDNF		= (1 << 4),	/* ID not found */
+	ATA_MCR			= (1 << 3),	/* media change requested */
 	ATA_ABORTED		= (1 << 2),	/* command aborted */
+	ATA_TRK0NF		= (1 << 1),	/* track 0 not found */
+	ATA_AMNF		= (1 << 0),	/* address mark not found */
+	ATAPI_LFS		= 0xF0,		/* last failed sense */
+	ATAPI_EOM		= ATA_TRK0NF,	/* end of media */
+	ATAPI_ILI		= ATA_AMNF,	/* illegal length indication */
+	ATAPI_IO		= (1 << 1),
+	ATAPI_COD		= (1 << 0),
 
 	/* ATA command block registers */
 	ATA_REG_DATA		= 0x00,
@@ -192,6 +235,13 @@ enum {
 	ATA_CMD_PMP_WRITE	= 0xE8,
 	ATA_CMD_CONF_OVERLAY	= 0xB1,
 	ATA_CMD_SEC_FREEZE_LOCK	= 0xF5,
+	ATA_CMD_SMART		= 0xB0,
+	ATA_CMD_MEDIA_LOCK	= 0xDE,
+	ATA_CMD_MEDIA_UNLOCK	= 0xDF,
+	/* marked obsolete in the ATA/ATAPI-7 spec */
+	ATA_CMD_RESTORE		= 0x10,
+	/* EXABYTE specific */
+	ATA_EXABYTE_ENABLE_NEST	= 0xF0,
 
 	/* READ_LOG_EXT pages */
 	ATA_LOG_SATA_NCQ	= 0x10,
@@ -232,6 +282,10 @@ enum {
 	SETFEATURES_WC_ON	= 0x02, /* Enable write cache */
 	SETFEATURES_WC_OFF	= 0x82, /* Disable write cache */
 
+	/* Enable/Disable Automatic Acoustic Management */
+	SETFEATURES_AAM_ON	= 0x42,
+	SETFEATURES_AAM_OFF	= 0xC2,
+
 	SETFEATURES_SPINUP	= 0x07, /* Spin-up drive */
 
 	SETFEATURES_SATA_ENABLE = 0x10, /* Enable use of SATA feature */
@@ -254,6 +308,15 @@ enum {
 	ATA_DCO_IDENTIFY	= 0xC2,
 	ATA_DCO_SET		= 0xC3,
 
+	/* feature values for SMART */
+	ATA_SMART_ENABLE	= 0xD8,
+	ATA_SMART_READ_VALUES	= 0xD0,
+	ATA_SMART_READ_THRESHOLDS = 0xD1,
+
+	/* password used in LBA Mid / LBA High for executing SMART commands */
+	ATA_SMART_LBAM_PASS	= 0x4F,
+	ATA_SMART_LBAH_PASS	= 0xC2,
+
 	/* ATAPI stuff */
 	ATAPI_PKT_DMA		= (1 << 0),
 	ATAPI_DMADIR		= (1 << 2),	/* ATAPI data dir:
@@ -438,17 +501,17 @@ static inline int ata_is_data(u8 prot)
 /*
  * id tests
  */
-#define ata_id_is_ata(id)	(((id)[0] & (1 << 15)) == 0)
-#define ata_id_has_lba(id)	((id)[49] & (1 << 9))
-#define ata_id_has_dma(id)	((id)[49] & (1 << 8))
+#define ata_id_is_ata(id)	(((id)[ATA_ID_CONFIG] & (1 << 15)) == 0)
+#define ata_id_has_lba(id)	((id)[ATA_ID_CAPABILITY] & (1 << 9))
+#define ata_id_has_dma(id)	((id)[ATA_ID_CAPABILITY] & (1 << 8))
 #define ata_id_has_ncq(id)	((id)[76] & (1 << 8))
-#define ata_id_queue_depth(id)	(((id)[75] & 0x1f) + 1)
-#define ata_id_removeable(id)	((id)[0] & (1 << 7))
+#define ata_id_queue_depth(id)	(((id)[ATA_ID_QUEUE_DEPTH] & 0x1f) + 1)
+#define ata_id_removeable(id)	((id)[ATA_ID_CONFIG] & (1 << 7))
 #define ata_id_has_atapi_AN(id)	\
 	( (((id)[76] != 0x0000) && ((id)[76] != 0xffff)) && \
 	  ((id)[78] & (1 << 5)) )
-#define ata_id_iordy_disable(id) ((id)[49] & (1 << 10))
-#define ata_id_has_iordy(id) ((id)[49] & (1 << 11))
+#define ata_id_iordy_disable(id) ((id)[ATA_ID_CAPABILITY] & (1 << 10))
+#define ata_id_has_iordy(id) ((id)[ATA_ID_CAPABILITY] & (1 << 11))
 #define ata_id_u32(id,n)	\
 	(((u32) (id)[(n) + 1] << 16) | ((u32) (id)[(n)]))
 #define ata_id_u64(id,n)	\
@@ -457,7 +520,7 @@ static inline int ata_is_data(u8 prot)
 	  ((u64) (id)[(n) + 1] << 16) |	\
 	  ((u64) (id)[(n) + 0]) )
 
-#define ata_id_cdb_intr(id)	(((id)[0] & 0x60) == 0x20)
+#define ata_id_cdb_intr(id)	(((id)[ATA_ID_CONFIG] & 0x60) == 0x20)
 
 static inline bool ata_id_has_hipm(const u16 *id)
 {
@@ -482,75 +545,75 @@ static inline bool ata_id_has_dipm(const u16 *id)
 
 static inline int ata_id_has_fua(const u16 *id)
 {
-	if ((id[84] & 0xC000) != 0x4000)
+	if ((id[ATA_ID_CFSSE] & 0xC000) != 0x4000)
 		return 0;
-	return id[84] & (1 << 6);
+	return id[ATA_ID_CFSSE] & (1 << 6);
 }
 
 static inline int ata_id_has_flush(const u16 *id)
 {
-	if ((id[83] & 0xC000) != 0x4000)
+	if ((id[ATA_ID_COMMAND_SET_2] & 0xC000) != 0x4000)
 		return 0;
-	return id[83] & (1 << 12);
+	return id[ATA_ID_COMMAND_SET_2] & (1 << 12);
 }
 
 static inline int ata_id_has_flush_ext(const u16 *id)
 {
-	if ((id[83] & 0xC000) != 0x4000)
+	if ((id[ATA_ID_COMMAND_SET_2] & 0xC000) != 0x4000)
 		return 0;
-	return id[83] & (1 << 13);
+	return id[ATA_ID_COMMAND_SET_2] & (1 << 13);
 }
 
 static inline int ata_id_has_lba48(const u16 *id)
 {
-	if ((id[83] & 0xC000) != 0x4000)
+	if ((id[ATA_ID_COMMAND_SET_2] & 0xC000) != 0x4000)
 		return 0;
-	if (!ata_id_u64(id, 100))
+	if (!ata_id_u64(id, ATA_ID_LBA_CAPACITY_2))
 		return 0;
-	return id[83] & (1 << 10);
+	return id[ATA_ID_COMMAND_SET_2] & (1 << 10);
 }
 
 static inline int ata_id_hpa_enabled(const u16 *id)
 {
 	/* Yes children, word 83 valid bits cover word 82 data */
-	if ((id[83] & 0xC000) != 0x4000)
+	if ((id[ATA_ID_COMMAND_SET_2] & 0xC000) != 0x4000)
 		return 0;
 	/* And 87 covers 85-87 */
-	if ((id[87] & 0xC000) != 0x4000)
+	if ((id[ATA_ID_CSF_DEFAULT] & 0xC000) != 0x4000)
 		return 0;
 	/* Check command sets enabled as well as supported */
-	if ((id[85] & ( 1 << 10)) == 0)
+	if ((id[ATA_ID_CFS_ENABLE_1] & (1 << 10)) == 0)
 		return 0;
-	return id[82] & (1 << 10);
+	return id[ATA_ID_COMMAND_SET_1] & (1 << 10);
 }
 
 static inline int ata_id_has_wcache(const u16 *id)
 {
 	/* Yes children, word 83 valid bits cover word 82 data */
-	if ((id[83] & 0xC000) != 0x4000)
+	if ((id[ATA_ID_COMMAND_SET_2] & 0xC000) != 0x4000)
 		return 0;
-	return id[82] & (1 << 5);
+	return id[ATA_ID_COMMAND_SET_1] & (1 << 5);
 }
 
 static inline int ata_id_has_pm(const u16 *id)
 {
-	if ((id[83] & 0xC000) != 0x4000)
+	if ((id[ATA_ID_COMMAND_SET_2] & 0xC000) != 0x4000)
 		return 0;
-	return id[82] & (1 << 3);
+	return id[ATA_ID_COMMAND_SET_1] & (1 << 3);
 }
 
 static inline int ata_id_rahead_enabled(const u16 *id)
 {
-	if ((id[87] & 0xC000) != 0x4000)
+	if ((id[ATA_ID_CSF_DEFAULT] & 0xC000) != 0x4000)
 		return 0;
-	return id[85] & (1 << 6);
+	return id[ATA_ID_CFS_ENABLE_1] & (1 << 6);
 }
 
 static inline int ata_id_wcache_enabled(const u16 *id)
 {
-	if ((id[87] & 0xC000) != 0x4000)
+	if ((id[ATA_ID_CSF_DEFAULT] & 0xC000) != 0x4000)
 		return 0;
-	return id[85] & (1 << 5);
+	return id[ATA_ID_CFS_ENABLE_1] & (1 << 5);
 }
 
 /**
@@ -581,7 +644,7 @@ static inline unsigned int ata_id_major_version(const u16 *id)
 
 static inline int ata_id_is_sata(const u16 *id)
 {
-	return ata_id_major_version(id) >= 5 && id[93] == 0;
+	return ata_id_major_version(id) >= 5 && id[ATA_ID_HW_CONFIG] == 0;
 }
 
 static inline int ata_id_has_tpm(const u16 *id)
@@ -599,7 +662,7 @@ static inline int ata_id_has_dword_io(const u16 *id)
 	/* ATA 8 reuses this flag for "trusted" computing */
 	if (ata_id_major_version(id) > 7)
 		return 0;
-	if (id[48] & (1 << 0))
+	if (id[ATA_ID_DWORD_IO] & (1 << 0))
 		return 1;
 	return 0;
 }
@@ -608,22 +671,22 @@ static inline int ata_id_current_chs_valid(const u16 *id)
 {
 	/* For ATA-1 devices, if the INITIALIZE DEVICE PARAMETERS command
 	   has not been issued to the device then the values of
-	   id[54] to id[56] are vendor specific. */
-	return (id[53] & 0x01) && /* Current translation valid */
-		id[54] &&  /* cylinders in current translation */
-		id[55] &&  /* heads in current translation */
-		id[55] <= 16 &&
-		id[56];    /* sectors in current translation */
+	   id[ATA_ID_CUR_CYLS] to id[ATA_ID_CUR_SECTORS] are vendor specific. */
+	return (id[ATA_ID_FIELD_VALID] & 1) && /* Current translation valid */
+		id[ATA_ID_CUR_CYLS] &&  /* cylinders in current translation */
+		id[ATA_ID_CUR_HEADS] &&  /* heads in current translation */
+		id[ATA_ID_CUR_HEADS] <= 16 &&
+		id[ATA_ID_CUR_SECTORS];    /* sectors in current translation */
 }
 
 static inline int ata_id_is_cfa(const u16 *id)
 {
-	u16 v = id[0];
-	if (v == 0x848A)	/* Standard CF */
+	if (id[ATA_ID_CONFIG] == 0x848A)	/* Standard CF */
 		return 1;
 	/* Could be CF hiding as standard ATA */
-	if (ata_id_major_version(id) >= 3 &&  id[82] != 0xFFFF &&
-			(id[82] & ( 1 << 2)))
+	if (ata_id_major_version(id) >= 3 &&
+	    id[ATA_ID_COMMAND_SET_1] != 0xFFFF &&
+	   (id[ATA_ID_COMMAND_SET_1] & (1 << 2)))
 		return 1;
 	return 0;
 }
@@ -632,21 +695,21 @@ static inline int ata_drive_40wire(const u16 *dev_id)
 {
 	if (ata_id_is_sata(dev_id))
 		return 0;	/* SATA */
-	if ((dev_id[93] & 0xE000) == 0x6000)
+	if ((dev_id[ATA_ID_HW_CONFIG] & 0xE000) == 0x6000)
 		return 0;	/* 80 wire */
 	return 1;
 }
 
 static inline int ata_drive_40wire_relaxed(const u16 *dev_id)
 {
-	if ((dev_id[93] & 0x2000) == 0x2000)
+	if ((dev_id[ATA_ID_HW_CONFIG] & 0x2000) == 0x2000)
 		return 0;	/* 80 wire */
 	return 1;
 }
 
 static inline int atapi_cdb_len(const u16 *dev_id)
 {
-	u16 tmp = dev_id[0] & 0x3;
+	u16 tmp = dev_id[ATA_ID_CONFIG] & 0x3;
 	switch (tmp) {
 	case 0:		return 12;
 	case 1:		return 16;
@@ -656,7 +719,7 @@ static inline int atapi_cdb_len(const u16 *dev_id)
 
 static inline int atapi_command_packet_set(const u16 *dev_id)
 {
-	return (dev_id[0] >> 8) & 0x1f;
+	return (dev_id[ATA_ID_CONFIG] >> 8) & 0x1f;
 }
 
 static inline int atapi_id_dmadir(const u16 *dev_id)
diff --git a/include/linux/auxvec.h b/include/linux/auxvec.h
index 0da17d14fd13..d7afa9dd6635 100644
--- a/include/linux/auxvec.h
+++ b/include/linux/auxvec.h
@@ -26,9 +26,13 @@
 
 #define AT_SECURE 23   /* secure mode boolean */
 
+#define AT_BASE_PLATFORM 24	/* string identifying real platform, may
+				 * differ from AT_PLATFORM. */
+
 #define AT_EXECFN  31	/* filename of program */
+
 #ifdef __KERNEL__
-#define AT_VECTOR_SIZE_BASE 17 /* NEW_AUX_ENT entries in auxiliary table */
+#define AT_VECTOR_SIZE_BASE 18 /* NEW_AUX_ENT entries in auxiliary table */
   /* number of "#define AT_.*" above, minus {AT_NULL, AT_IGNORE, AT_NOTELF} */
 #endif
 
diff --git a/include/linux/bitmap.h b/include/linux/bitmap.h
index 1abfe664c444..89781fd48859 100644
--- a/include/linux/bitmap.h
+++ b/include/linux/bitmap.h
@@ -110,6 +110,7 @@ extern int __bitmap_weight(const unsigned long *bitmap, int bits);
 
 extern int bitmap_scnprintf(char *buf, unsigned int len,
 			const unsigned long *src, int nbits);
+extern int bitmap_scnprintf_len(unsigned int nr_bits);
 extern int __bitmap_parse(const char *buf, unsigned int buflen, int is_user,
 			unsigned long *dst, int nbits);
 extern int bitmap_parse_user(const char __user *ubuf, unsigned int ulen,
diff --git a/include/linux/blkdev.h b/include/linux/blkdev.h
index 88d68081a0f1..44710d7e7bff 100644
--- a/include/linux/blkdev.h
+++ b/include/linux/blkdev.h
@@ -280,6 +280,15 @@ struct blk_queue_tag {
 	atomic_t refcnt;		/* map can be shared */
 };
 
+#define BLK_SCSI_MAX_CMDS	(256)
+#define BLK_SCSI_CMD_PER_LONG	(BLK_SCSI_MAX_CMDS / (sizeof(long) * 8))
+
+struct blk_cmd_filter {
+	unsigned long read_ok[BLK_SCSI_CMD_PER_LONG];
+	unsigned long write_ok[BLK_SCSI_CMD_PER_LONG];
+	struct kobject kobj;
+};
+
 struct request_queue
 {
 	/*
@@ -398,6 +407,7 @@ struct request_queue
 #if defined(CONFIG_BLK_DEV_BSG)
 	struct bsg_class_device bsg_dev;
 #endif
+	struct blk_cmd_filter cmd_filter;
 };
 
 #define QUEUE_FLAG_CLUSTER	0	/* cluster several segments into 1 */
@@ -655,6 +665,7 @@ extern struct request *blk_get_request(struct request_queue *, int, gfp_t);
 extern void blk_insert_request(struct request_queue *, struct request *, int, void *);
 extern void blk_requeue_request(struct request_queue *, struct request *);
 extern void blk_plug_device(struct request_queue *);
+extern void blk_plug_device_unlocked(struct request_queue *);
 extern int blk_remove_plug(struct request_queue *);
 extern void blk_recount_segments(struct request_queue *, struct bio *);
 extern int scsi_cmd_ioctl(struct file *, struct request_queue *,
@@ -806,8 +817,6 @@ extern void blk_put_queue(struct request_queue *);
 /*
  * tag stuff
  */
-#define blk_queue_tag_depth(q)		((q)->queue_tags->busy)
-#define blk_queue_tag_queue(q)		((q)->queue_tags->busy < (q)->queue_tags->max_depth)
 #define blk_rq_tagged(rq)		((rq)->cmd_flags & REQ_QUEUED)
 extern int blk_queue_start_tag(struct request_queue *, struct request *);
 extern struct request *blk_queue_find_tag(struct request_queue *, int);
@@ -832,11 +841,11 @@ extern int blkdev_issue_flush(struct block_device *, sector_t *);
 /*
 * command filter functions
 */
-extern int blk_verify_command(struct file *file, unsigned char *cmd);
-extern int blk_cmd_filter_verify_command(struct blk_scsi_cmd_filter *filter,
-					 unsigned char *cmd, mode_t *f_mode);
+extern int blk_verify_command(struct blk_cmd_filter *filter,
+			      unsigned char *cmd, int has_write_perm);
 extern int blk_register_filter(struct gendisk *disk);
 extern void blk_unregister_filter(struct gendisk *disk);
+extern void blk_set_cmd_filter_defaults(struct blk_cmd_filter *filter);
 
 #define MAX_PHYS_SEGMENTS 128
 #define MAX_HW_SEGMENTS 128
diff --git a/include/linux/bootmem.h b/include/linux/bootmem.h
index 4ddf2922fc8d..95837bfb5256 100644
--- a/include/linux/bootmem.h
+++ b/include/linux/bootmem.h
@@ -97,23 +97,26 @@ extern void *__alloc_bootmem_low_node(pg_data_t *pgdat,
 #ifndef CONFIG_HAVE_ARCH_BOOTMEM_NODE
 #define alloc_bootmem(x) \
 	__alloc_bootmem(x, SMP_CACHE_BYTES, __pa(MAX_DMA_ADDRESS))
+#define alloc_bootmem_nopanic(x) \
+	__alloc_bootmem_nopanic(x, SMP_CACHE_BYTES, __pa(MAX_DMA_ADDRESS))
 #define alloc_bootmem_low(x) \
 	__alloc_bootmem_low(x, SMP_CACHE_BYTES, 0)
 #define alloc_bootmem_pages(x) \
 	__alloc_bootmem(x, PAGE_SIZE, __pa(MAX_DMA_ADDRESS))
+#define alloc_bootmem_pages_nopanic(x) \
+	__alloc_bootmem_nopanic(x, PAGE_SIZE, __pa(MAX_DMA_ADDRESS))
 #define alloc_bootmem_low_pages(x) \
 	__alloc_bootmem_low(x, PAGE_SIZE, 0)
-#endif /* !CONFIG_HAVE_ARCH_BOOTMEM_NODE */
-
-extern int reserve_bootmem_generic(unsigned long addr, unsigned long size,
-				   int flags);
-
 #define alloc_bootmem_node(pgdat, x) \
 	__alloc_bootmem_node(pgdat, x, SMP_CACHE_BYTES, __pa(MAX_DMA_ADDRESS))
 #define alloc_bootmem_pages_node(pgdat, x) \
 	__alloc_bootmem_node(pgdat, x, PAGE_SIZE, __pa(MAX_DMA_ADDRESS))
 #define alloc_bootmem_low_pages_node(pgdat, x) \
 	__alloc_bootmem_low_node(pgdat, x, PAGE_SIZE, 0)
+#endif /* !CONFIG_HAVE_ARCH_BOOTMEM_NODE */
+
+extern int reserve_bootmem_generic(unsigned long addr, unsigned long size,
+				   int flags);
 
 extern void *alloc_bootmem_section(unsigned long size,
 				   unsigned long section_nr);
diff --git a/include/linux/buffer_head.h b/include/linux/buffer_head.h
index 82aa36c53ea7..eadaab44015f 100644
--- a/include/linux/buffer_head.h
+++ b/include/linux/buffer_head.h
@@ -115,7 +115,6 @@ BUFFER_FNS(Uptodate, uptodate)
 BUFFER_FNS(Dirty, dirty)
 TAS_BUFFER_FNS(Dirty, dirty)
 BUFFER_FNS(Lock, locked)
-TAS_BUFFER_FNS(Lock, locked)
 BUFFER_FNS(Req, req)
 TAS_BUFFER_FNS(Req, req)
 BUFFER_FNS(Mapped, mapped)
@@ -205,6 +204,8 @@ void block_invalidatepage(struct page *page, unsigned long offset);
 int block_write_full_page(struct page *page, get_block_t *get_block,
 				struct writeback_control *wbc);
 int block_read_full_page(struct page*, get_block_t*);
+int block_is_partially_uptodate(struct page *page, read_descriptor_t *desc,
+				unsigned long from);
 int block_write_begin(struct file *, struct address_space *,
 				loff_t, unsigned, unsigned,
 				struct page **, void **, get_block_t*);
@@ -319,10 +320,15 @@ static inline void wait_on_buffer(struct buffer_head *bh)
 		__wait_on_buffer(bh);
 }
 
+static inline int trylock_buffer(struct buffer_head *bh)
+{
+	return likely(!test_and_set_bit(BH_Lock, &bh->b_state));
+}
+
 static inline void lock_buffer(struct buffer_head *bh)
 {
 	might_sleep();
-	if (test_set_buffer_locked(bh))
+	if (!trylock_buffer(bh))
 		__lock_buffer(bh);
 }
 
diff --git a/include/linux/byteorder.h b/include/linux/byteorder.h
new file mode 100644
index 000000000000..29f002d73d98
--- /dev/null
+++ b/include/linux/byteorder.h
@@ -0,0 +1,372 @@
+#ifndef _LINUX_BYTEORDER_H
+#define _LINUX_BYTEORDER_H
+
+#include <linux/types.h>
+#include <linux/swab.h>
+
+#if defined(__LITTLE_ENDIAN) && defined(__BIG_ENDIAN)
+# error Fix asm/byteorder.h to define one endianness
+#endif
+
+#if !defined(__LITTLE_ENDIAN) && !defined(__BIG_ENDIAN)
+# error Fix asm/byteorder.h to define arch endianness
+#endif
+
+#ifdef __LITTLE_ENDIAN
+# undef __LITTLE_ENDIAN
+# define __LITTLE_ENDIAN 1234
+#endif
+
+#ifdef __BIG_ENDIAN
+# undef __BIG_ENDIAN
+# define __BIG_ENDIAN 4321
+#endif
+
+#if defined(__LITTLE_ENDIAN) && !defined(__LITTLE_ENDIAN_BITFIELD)
+# define __LITTLE_ENDIAN_BITFIELD
+#endif
+
+#if defined(__BIG_ENDIAN) && !defined(__BIG_ENDIAN_BITFIELD)
+# define __BIG_ENDIAN_BITFIELD
+#endif
+
+#ifdef __LITTLE_ENDIAN
+# define __le16_to_cpu(x) ((__force __u16)(__le16)(x))
+# define __le32_to_cpu(x) ((__force __u32)(__le32)(x))
+# define __le64_to_cpu(x) ((__force __u64)(__le64)(x))
+# define __cpu_to_le16(x) ((__force __le16)(__u16)(x))
+# define __cpu_to_le32(x) ((__force __le32)(__u32)(x))
+# define __cpu_to_le64(x) ((__force __le64)(__u64)(x))
+
+# define __be16_to_cpu(x) __swab16((__force __u16)(__be16)(x))
+# define __be32_to_cpu(x) __swab32((__force __u32)(__be32)(x))
+# define __be64_to_cpu(x) __swab64((__force __u64)(__be64)(x))
+# define __cpu_to_be16(x) ((__force __be16)__swab16(x))
+# define __cpu_to_be32(x) ((__force __be32)__swab32(x))
+# define __cpu_to_be64(x) ((__force __be64)__swab64(x))
+#endif
+
+#ifdef __BIG_ENDIAN
+# define __be16_to_cpu(x) ((__force __u16)(__be16)(x))
+# define __be32_to_cpu(x) ((__force __u32)(__be32)(x))
+# define __be64_to_cpu(x) ((__force __u64)(__be64)(x))
+# define __cpu_to_be16(x) ((__force __be16)(__u16)(x))
+# define __cpu_to_be32(x) ((__force __be32)(__u32)(x))
+# define __cpu_to_be64(x) ((__force __be64)(__u64)(x))
+
+# define __le16_to_cpu(x) __swab16((__force __u16)(__le16)(x))
+# define __le32_to_cpu(x) __swab32((__force __u32)(__le32)(x))
+# define __le64_to_cpu(x) __swab64((__force __u64)(__le64)(x))
+# define __cpu_to_le16(x) ((__force __le16)__swab16(x))
+# define __cpu_to_le32(x) ((__force __le32)__swab32(x))
+# define __cpu_to_le64(x) ((__force __le64)__swab64(x))
+#endif
+
+/*
+ * These helpers could be phased out over time as the base version
+ * handles constant folding.
+ */
+#define __constant_htonl(x) __cpu_to_be32(x)
+#define __constant_ntohl(x) __be32_to_cpu(x)
+#define __constant_htons(x) __cpu_to_be16(x)
+#define __constant_ntohs(x) __be16_to_cpu(x)
+
+#define __constant_le16_to_cpu(x) __le16_to_cpu(x)
+#define __constant_le32_to_cpu(x) __le32_to_cpu(x)
+#define __constant_le64_to_cpu(x) __le64_to_cpu(x)
+#define __constant_be16_to_cpu(x) __be16_to_cpu(x)
+#define __constant_be32_to_cpu(x) __be32_to_cpu(x)
+#define __constant_be64_to_cpu(x) __be64_to_cpu(x)
+
+#define __constant_cpu_to_le16(x) __cpu_to_le16(x)
+#define __constant_cpu_to_le32(x) __cpu_to_le32(x)
+#define __constant_cpu_to_le64(x) __cpu_to_le64(x)
+#define __constant_cpu_to_be16(x) __cpu_to_be16(x)
+#define __constant_cpu_to_be32(x) __cpu_to_be32(x)
+#define __constant_cpu_to_be64(x) __cpu_to_be64(x)
+
+static inline void __le16_to_cpus(__u16 *p)
+{
+#ifdef __BIG_ENDIAN
+	__swab16s(p);
+#endif
+}
+
+static inline void __cpu_to_le16s(__u16 *p)
+{
+#ifdef __BIG_ENDIAN
+	__swab16s(p);
+#endif
+}
+
+static inline void __le32_to_cpus(__u32 *p)
+{
+#ifdef __BIG_ENDIAN
+	__swab32s(p);
+#endif
+}
+
+static inline void __cpu_to_le32s(__u32 *p)
+{
+#ifdef __BIG_ENDIAN
+	__swab32s(p);
+#endif
+}
+
+static inline void __le64_to_cpus(__u64 *p)
+{
+#ifdef __BIG_ENDIAN
+	__swab64s(p);
+#endif
+}
+
+static inline void __cpu_to_le64s(__u64 *p)
+{
+#ifdef __BIG_ENDIAN
+	__swab64s(p);
+#endif
+}
+
+static inline void __be16_to_cpus(__u16 *p)
+{
+#ifdef __LITTLE_ENDIAN
+	__swab16s(p);
+#endif
+}
+
+static inline void __cpu_to_be16s(__u16 *p)
+{
+#ifdef __LITTLE_ENDIAN
+	__swab16s(p);
+#endif
+}
+
+static inline void __be32_to_cpus(__u32 *p)
+{
+#ifdef __LITTLE_ENDIAN
+	__swab32s(p);
+#endif
+}
+
+static inline void __cpu_to_be32s(__u32 *p)
+{
+#ifdef __LITTLE_ENDIAN
+	__swab32s(p);
+#endif
+}
+
+static inline void __be64_to_cpus(__u64 *p)
+{
+#ifdef __LITTLE_ENDIAN
+	__swab64s(p);
+#endif
+}
+
+static inline void __cpu_to_be64s(__u64 *p)
+{
+#ifdef __LITTLE_ENDIAN
+	__swab64s(p);
+#endif
+}
+
+static inline __u16 __le16_to_cpup(const __le16 *p)
+{
+#ifdef __LITTLE_ENDIAN
+	return (__force __u16)*p;
+#else
+	return __swab16p((__force __u16 *)p);
+#endif
+}
+
+static inline __u32 __le32_to_cpup(const __le32 *p)
+{
+#ifdef __LITTLE_ENDIAN
+	return (__force __u32)*p;
+#else
+	return __swab32p((__force __u32 *)p);
+#endif
+}
+
+static inline __u64 __le64_to_cpup(const __le64 *p)
+{
+#ifdef __LITTLE_ENDIAN
+	return (__force __u64)*p;
+#else
+	return __swab64p((__force __u64 *)p);
+#endif
+}
+
+static inline __le16 __cpu_to_le16p(const __u16 *p)
+{
+#ifdef __LITTLE_ENDIAN
+	return (__force __le16)*p;
+#else
+	return (__force __le16)__swab16p(p);
+#endif
+}
+
+static inline __le32 __cpu_to_le32p(const __u32 *p)
+{
+#ifdef __LITTLE_ENDIAN
+	return (__force __le32)*p;
+#else
+	return (__force __le32)__swab32p(p);
+#endif
+}
+
+static inline __le64 __cpu_to_le64p(const __u64 *p)
+{
+#ifdef __LITTLE_ENDIAN
+	return (__force __le64)*p;
+#else
+	return (__force __le64)__swab64p(p);
+#endif
+}
+
+static inline __u16 __be16_to_cpup(const __be16 *p)
+{
+#ifdef __BIG_ENDIAN
+	return (__force __u16)*p;
+#else
+	return __swab16p((__force __u16 *)p);
+#endif
+}
+
+static inline __u32 __be32_to_cpup(const __be32 *p)
+{
+#ifdef __BIG_ENDIAN
+	return (__force __u32)*p;
+#else
+	return __swab32p((__force __u32 *)p);
+#endif
+}
+
+static inline __u64 __be64_to_cpup(const __be64 *p)
+{
+#ifdef __BIG_ENDIAN
+	return (__force __u64)*p;
+#else
+	return __swab64p((__force __u64 *)p);
+#endif
+}
+
+static inline __be16 __cpu_to_be16p(const __u16 *p)
+{
+#ifdef __BIG_ENDIAN
+	return (__force __be16)*p;
+#else
+	return (__force __be16)__swab16p(p);
+#endif
+}
+
+static inline __be32 __cpu_to_be32p(const __u32 *p)
+{
+#ifdef __BIG_ENDIAN
+	return (__force __be32)*p;
+#else
+	return (__force __be32)__swab32p(p);
+#endif
+}
+
+static inline __be64 __cpu_to_be64p(const __u64 *p)
+{
+#ifdef __BIG_ENDIAN
+	return (__force __be64)*p;
+#else
+	return (__force __be64)__swab64p(p);
+#endif
+}
+
+#ifdef __KERNEL__
+
+# define le16_to_cpu __le16_to_cpu
+# define le32_to_cpu __le32_to_cpu
+# define le64_to_cpu __le64_to_cpu
+# define be16_to_cpu __be16_to_cpu
+# define be32_to_cpu __be32_to_cpu
+# define be64_to_cpu __be64_to_cpu
+# define cpu_to_le16 __cpu_to_le16
+# define cpu_to_le32 __cpu_to_le32
+# define cpu_to_le64 __cpu_to_le64
+# define cpu_to_be16 __cpu_to_be16
+# define cpu_to_be32 __cpu_to_be32
+# define cpu_to_be64 __cpu_to_be64
+
+# define le16_to_cpup __le16_to_cpup
+# define le32_to_cpup __le32_to_cpup
+# define le64_to_cpup __le64_to_cpup
+# define be16_to_cpup __be16_to_cpup
+# define be32_to_cpup __be32_to_cpup
+# define be64_to_cpup __be64_to_cpup
+# define cpu_to_le16p __cpu_to_le16p
+# define cpu_to_le32p __cpu_to_le32p
+# define cpu_to_le64p __cpu_to_le64p
+# define cpu_to_be16p __cpu_to_be16p
+# define cpu_to_be32p __cpu_to_be32p
+# define cpu_to_be64p __cpu_to_be64p
+
+# define le16_to_cpus __le16_to_cpus
+# define le32_to_cpus __le32_to_cpus
+# define le64_to_cpus __le64_to_cpus
+# define be16_to_cpus __be16_to_cpus
+# define be32_to_cpus __be32_to_cpus
+# define be64_to_cpus __be64_to_cpus
+# define cpu_to_le16s __cpu_to_le16s
+# define cpu_to_le32s __cpu_to_le32s
+# define cpu_to_le64s __cpu_to_le64s
+# define cpu_to_be16s __cpu_to_be16s
+# define cpu_to_be32s __cpu_to_be32s
+# define cpu_to_be64s __cpu_to_be64s
+
+/*
+ * They have to be macros in order to do the constant folding
+ * correctly - if the argument passed into a inline function
+ * it is no longer constant according to gcc..
+ */
+# undef ntohl
+# undef ntohs
+# undef htonl
+# undef htons
+
+# define ___htonl(x) __cpu_to_be32(x)
+# define ___htons(x) __cpu_to_be16(x)
+# define ___ntohl(x) __be32_to_cpu(x)
+# define ___ntohs(x) __be16_to_cpu(x)
+
+# define htonl(x) ___htonl(x)
+# define ntohl(x) ___ntohl(x)
+# define htons(x) ___htons(x)
+# define ntohs(x) ___ntohs(x)
+
+static inline void le16_add_cpu(__le16 *var, u16 val)
+{
+	*var = cpu_to_le16(le16_to_cpup(var) + val);
+}
+
+static inline void le32_add_cpu(__le32 *var, u32 val)
+{
+	*var = cpu_to_le32(le32_to_cpup(var) + val);
+}
+
+static inline void le64_add_cpu(__le64 *var, u64 val)
+{
+	*var = cpu_to_le64(le64_to_cpup(var) + val);
+}
+
+static inline void be16_add_cpu(__be16 *var, u16 val)
+{
+	*var = cpu_to_be16(be16_to_cpup(var) + val);
+}
+
+static inline void be32_add_cpu(__be32 *var, u32 val)
+{
+	*var = cpu_to_be32(be32_to_cpup(var) + val);
+}
+
+static inline void be64_add_cpu(__be64 *var, u64 val)
+{
+	*var = cpu_to_be64(be64_to_cpup(var) + val);
+}
+
+#endif /* __KERNEL__ */
+#endif /* _LINUX_BYTEORDER_H */
diff --git a/include/linux/byteorder/big_endian.h b/include/linux/byteorder/big_endian.h
index 961ed4b48d8e..44f95b92393b 100644
--- a/include/linux/byteorder/big_endian.h
+++ b/include/linux/byteorder/big_endian.h
@@ -94,12 +94,12 @@ static inline __u16 __be16_to_cpup(const __be16 *p)
 #define __le32_to_cpus(x) __swab32s((x))
 #define __cpu_to_le16s(x) __swab16s((x))
 #define __le16_to_cpus(x) __swab16s((x))
-#define __cpu_to_be64s(x) do {} while (0)
-#define __be64_to_cpus(x) do {} while (0)
-#define __cpu_to_be32s(x) do {} while (0)
-#define __be32_to_cpus(x) do {} while (0)
-#define __cpu_to_be16s(x) do {} while (0)
-#define __be16_to_cpus(x) do {} while (0)
+#define __cpu_to_be64s(x) do { (void)(x); } while (0)
+#define __be64_to_cpus(x) do { (void)(x); } while (0)
+#define __cpu_to_be32s(x) do { (void)(x); } while (0)
+#define __be32_to_cpus(x) do { (void)(x); } while (0)
+#define __cpu_to_be16s(x) do { (void)(x); } while (0)
+#define __be16_to_cpus(x) do { (void)(x); } while (0)
 
 #ifdef __KERNEL__
 #include <linux/byteorder/generic.h>
diff --git a/include/linux/byteorder/little_endian.h b/include/linux/byteorder/little_endian.h
index 05dc7c35b3b2..4cc170a31762 100644
--- a/include/linux/byteorder/little_endian.h
+++ b/include/linux/byteorder/little_endian.h
@@ -88,12 +88,12 @@ static inline __u16 __be16_to_cpup(const __be16 *p)
 {
 	return __swab16p((__u16 *)p);
 }
-#define __cpu_to_le64s(x) do {} while (0)
-#define __le64_to_cpus(x) do {} while (0)
-#define __cpu_to_le32s(x) do {} while (0)
-#define __le32_to_cpus(x) do {} while (0)
-#define __cpu_to_le16s(x) do {} while (0)
-#define __le16_to_cpus(x) do {} while (0)
+#define __cpu_to_le64s(x) do { (void)(x); } while (0)
+#define __le64_to_cpus(x) do { (void)(x); } while (0)
+#define __cpu_to_le32s(x) do { (void)(x); } while (0)
+#define __le32_to_cpus(x) do { (void)(x); } while (0)
+#define __cpu_to_le16s(x) do { (void)(x); } while (0)
+#define __le16_to_cpus(x) do { (void)(x); } while (0)
 #define __cpu_to_be64s(x) __swab64s((x))
 #define __be64_to_cpus(x) __swab64s((x))
 #define __cpu_to_be32s(x) __swab32s((x))
diff --git a/include/linux/capability.h b/include/linux/capability.h
index 02673846d205..9d1fe30b6f6c 100644
--- a/include/linux/capability.h
+++ b/include/linux/capability.h
@@ -503,8 +503,19 @@ extern const kernel_cap_t __cap_init_eff_set;
 
 kernel_cap_t cap_set_effective(const kernel_cap_t pE_new);
 
-int capable(int cap);
-int __capable(struct task_struct *t, int cap);
+/**
+ * has_capability - Determine if a task has a superior capability available
+ * @t: The task in question
+ * @cap: The capability to be tested for
+ *
+ * Return true if the specified task has the given superior capability
+ * currently in effect, false if not.
+ *
+ * Note that this does not set PF_SUPERPRIV on the task.
+ */
+#define has_capability(t, cap) (security_capable((t), (cap)) == 0)
+
+extern int capable(int cap);
 
 #endif /* __KERNEL__ */
 
diff --git a/include/linux/cgroup.h b/include/linux/cgroup.h
index e155aa78d859..c98dd7cb7076 100644
--- a/include/linux/cgroup.h
+++ b/include/linux/cgroup.h
@@ -21,11 +21,13 @@
 struct cgroupfs_root;
 struct cgroup_subsys;
 struct inode;
+struct cgroup;
 
 extern int cgroup_init_early(void);
 extern int cgroup_init(void);
 extern void cgroup_init_smp(void);
 extern void cgroup_lock(void);
+extern bool cgroup_lock_live_group(struct cgroup *cgrp);
 extern void cgroup_unlock(void);
 extern void cgroup_fork(struct task_struct *p);
 extern void cgroup_fork_callbacks(struct task_struct *p);
@@ -205,50 +207,64 @@ struct cftype {
 	 * subsystem, followed by a period */
 	char name[MAX_CFTYPE_NAME];
 	int private;
-	int (*open) (struct inode *inode, struct file *file);
-	ssize_t (*read) (struct cgroup *cgrp, struct cftype *cft,
-			 struct file *file,
-			 char __user *buf, size_t nbytes, loff_t *ppos);
+
+	/*
+	 * If non-zero, defines the maximum length of string that can
+	 * be passed to write_string; defaults to 64
+	 */
+	size_t max_write_len;
+
+	int (*open)(struct inode *inode, struct file *file);
+	ssize_t (*read)(struct cgroup *cgrp, struct cftype *cft,
+			struct file *file,
+			char __user *buf, size_t nbytes, loff_t *ppos);
 	/*
 	 * read_u64() is a shortcut for the common case of returning a
 	 * single integer. Use it in place of read()
 	 */
-	u64 (*read_u64) (struct cgroup *cgrp, struct cftype *cft);
+	u64 (*read_u64)(struct cgroup *cgrp, struct cftype *cft);
 	/*
 	 * read_s64() is a signed version of read_u64()
 	 */
-	s64 (*read_s64) (struct cgroup *cgrp, struct cftype *cft);
+	s64 (*read_s64)(struct cgroup *cgrp, struct cftype *cft);
 	/*
 	 * read_map() is used for defining a map of key/value
 	 * pairs. It should call cb->fill(cb, key, value) for each
 	 * entry. The key/value pairs (and their ordering) should not
 	 * change between reboots.
 	 */
-	int (*read_map) (struct cgroup *cont, struct cftype *cft,
-			 struct cgroup_map_cb *cb);
+	int (*read_map)(struct cgroup *cont, struct cftype *cft,
+			struct cgroup_map_cb *cb);
 	/*
 	 * read_seq_string() is used for outputting a simple sequence
 	 * using seqfile.
 	 */
-	int (*read_seq_string) (struct cgroup *cont, struct cftype *cft,
-			 struct seq_file *m);
+	int (*read_seq_string)(struct cgroup *cont, struct cftype *cft,
+			       struct seq_file *m);
 
-	ssize_t (*write) (struct cgroup *cgrp, struct cftype *cft,
-			  struct file *file,
-			  const char __user *buf, size_t nbytes, loff_t *ppos);
+	ssize_t (*write)(struct cgroup *cgrp, struct cftype *cft,
+			 struct file *file,
+			 const char __user *buf, size_t nbytes, loff_t *ppos);
 
 	/*
 	 * write_u64() is a shortcut for the common case of accepting
 	 * a single integer (as parsed by simple_strtoull) from
 	 * userspace. Use in place of write(); return 0 or error.
 	 */
-	int (*write_u64) (struct cgroup *cgrp, struct cftype *cft, u64 val);
+	int (*write_u64)(struct cgroup *cgrp, struct cftype *cft, u64 val);
 	/*
 	 * write_s64() is a signed version of write_u64()
 	 */
-	int (*write_s64) (struct cgroup *cgrp, struct cftype *cft, s64 val);
+	int (*write_s64)(struct cgroup *cgrp, struct cftype *cft, s64 val);
 
 	/*
+	 * write_string() is passed a nul-terminated kernelspace
+	 * buffer of maximum length determined by max_write_len.
+	 * Returns 0 or -ve error code.
+	 */
+	int (*write_string)(struct cgroup *cgrp, struct cftype *cft,
+			    const char *buffer);
+	/*
 	 * trigger() callback can be used to get some kick from the
 	 * userspace, when the actual string written is not important
 	 * at all. The private field can be used to determine the
@@ -256,7 +272,7 @@ struct cftype {
 	 */
 	int (*trigger)(struct cgroup *cgrp, unsigned int event);
 
-	int (*release) (struct inode *inode, struct file *file);
+	int (*release)(struct inode *inode, struct file *file);
 };
 
 struct cgroup_scanner {
@@ -348,7 +364,8 @@ static inline struct cgroup* task_cgroup(struct task_struct *task,
 	return task_subsys_state(task, subsys_id)->cgroup;
 }
 
-int cgroup_clone(struct task_struct *tsk, struct cgroup_subsys *ss);
+int cgroup_clone(struct task_struct *tsk, struct cgroup_subsys *ss,
+							char *nodename);
 
 /* A cgroup_iter should be treated as an opaque object */
 struct cgroup_iter {
diff --git a/include/linux/coda.h b/include/linux/coda.h
index b5cf0780c51a..96c87693800b 100644
--- a/include/linux/coda.h
+++ b/include/linux/coda.h
@@ -199,28 +199,6 @@ typedef u_int32_t vuid_t;
 typedef u_int32_t vgid_t;
 #endif /*_VUID_T_ */
 
-#ifdef CONFIG_CODA_FS_OLD_API
-struct CodaFid {
-	u_int32_t opaque[3];
-};
-
-static __inline__ ino_t  coda_f2i(struct CodaFid *fid)
-{
-	if ( ! fid ) 
-		return 0; 
-	if (fid->opaque[1] == 0xfffffffe || fid->opaque[1] == 0xffffffff)
-		return ((fid->opaque[0] << 20) | (fid->opaque[2] & 0xfffff));
-	else
-		return (fid->opaque[2] + (fid->opaque[1]<<10) + (fid->opaque[0]<<20));
-}
-
-struct coda_cred {
-    vuid_t cr_uid, cr_euid, cr_suid, cr_fsuid; /* Real, efftve, set, fs uid*/
-    vgid_t cr_groupid, cr_egid, cr_sgid, cr_fsgid; /* same for groups */
-};
-
-#else /* not defined(CONFIG_CODA_FS_OLD_API) */
-
 struct CodaFid {
 	u_int32_t opaque[4];
 };
@@ -228,8 +206,6 @@ struct CodaFid {
 #define coda_f2i(fid)\
 	(fid ? (fid->opaque[3] ^ (fid->opaque[2]<<10) ^ (fid->opaque[1]<<20) ^ fid->opaque[0]) : 0)
 
-#endif
-
 #ifndef _VENUS_VATTR_T_
 #define _VENUS_VATTR_T_
 /*
@@ -313,15 +289,7 @@ struct coda_statfs {
 
 #define CIOC_KERNEL_VERSION _IOWR('c', 10, size_t)
 
-#if 0
-#define CODA_KERNEL_VERSION 0 /* don't care about kernel version number */
-#define CODA_KERNEL_VERSION 1 /* The old venus 4.6 compatible interface */
-#endif
-#ifdef CONFIG_CODA_FS_OLD_API
-#define CODA_KERNEL_VERSION 2 /* venus_lookup got an extra parameter */
-#else
 #define CODA_KERNEL_VERSION 3 /* 128-bit file identifiers */
-#endif
 
 /*
  *        Venus <-> Coda  RPC arguments
@@ -329,16 +297,9 @@ struct coda_statfs {
 struct coda_in_hdr {
     u_int32_t opcode;
     u_int32_t unique;	    /* Keep multiple outstanding msgs distinct */
-#ifdef CONFIG_CODA_FS_OLD_API
-    u_int16_t pid;	    /* Common to all */
-    u_int16_t pgid;	    /* Common to all */
-    u_int16_t sid;          /* Common to all */
-    struct coda_cred cred;  /* Common to all */
-#else
     pid_t pid;
     pid_t pgid;
     vuid_t uid;
-#endif
 };
 
 /* Really important that opcode and unique are 1st two fields! */
@@ -613,11 +574,7 @@ struct coda_vget_out {
 /* CODA_PURGEUSER is a venus->kernel call */
 struct coda_purgeuser_out {
     struct coda_out_hdr oh;
-#ifdef CONFIG_CODA_FS_OLD_API
-    struct coda_cred cred;
-#else
     vuid_t uid;
-#endif
 };
 
 /* coda_zapfile: */
diff --git a/include/linux/coda_linux.h b/include/linux/coda_linux.h
index 31b75311e2ca..dcc228aa335a 100644
--- a/include/linux/coda_linux.h
+++ b/include/linux/coda_linux.h
@@ -37,7 +37,7 @@ extern const struct file_operations coda_ioctl_operations;
 /* operations shared over more than one file */
 int coda_open(struct inode *i, struct file *f);
 int coda_release(struct inode *i, struct file *f);
-int coda_permission(struct inode *inode, int mask, struct nameidata *nd);
+int coda_permission(struct inode *inode, int mask);
 int coda_revalidate_inode(struct dentry *);
 int coda_getattr(struct vfsmount *, struct dentry *, struct kstat *);
 int coda_setattr(struct dentry *, struct iattr *);
diff --git a/include/linux/completion.h b/include/linux/completion.h
index d2961b66d53d..02ef8835999c 100644
--- a/include/linux/completion.h
+++ b/include/linux/completion.h
@@ -49,10 +49,13 @@ extern unsigned long wait_for_completion_timeout(struct completion *x,
 						   unsigned long timeout);
 extern unsigned long wait_for_completion_interruptible_timeout(
 			struct completion *x, unsigned long timeout);
+extern bool try_wait_for_completion(struct completion *x);
+extern bool completion_done(struct completion *x);
 
 extern void complete(struct completion *);
 extern void complete_all(struct completion *);
 
 #define INIT_COMPLETION(x)	((x).done = 0)
 
+
 #endif
diff --git a/include/linux/configfs.h b/include/linux/configfs.h
index d62c19ff041c..7f627775c947 100644
--- a/include/linux/configfs.h
+++ b/include/linux/configfs.h
@@ -40,6 +40,7 @@
 #include <linux/list.h>
 #include <linux/kref.h>
 #include <linux/mutex.h>
+#include <linux/err.h>
 
 #include <asm/atomic.h>
 
@@ -129,8 +130,25 @@ struct configfs_attribute {
 /*
  * Users often need to create attribute structures for their configurable
  * attributes, containing a configfs_attribute member and function pointers
- * for the show() and store() operations on that attribute. They can use
- * this macro (similar to sysfs' __ATTR) to make defining attributes easier.
+ * for the show() and store() operations on that attribute. If they don't
+ * need anything else on the extended attribute structure, they can use
+ * this macro to define it  The argument _item is the name of the
+ * config_item structure.
+ */
+#define CONFIGFS_ATTR_STRUCT(_item)					\
+struct _item##_attribute {						\
+	struct configfs_attribute attr;					\
+	ssize_t (*show)(struct _item *, char *);			\
+	ssize_t (*store)(struct _item *, const char *, size_t);		\
+}
+
+/*
+ * With the extended attribute structure, users can use this macro
+ * (similar to sysfs' __ATTR) to make defining attributes easier.
+ * An example:
+ * #define MYITEM_ATTR(_name, _mode, _show, _store)	\
+ * struct myitem_attribute childless_attr_##_name =	\
+ *         __CONFIGFS_ATTR(_name, _mode, _show, _store)
  */
 #define __CONFIGFS_ATTR(_name, _mode, _show, _store)			\
 {									\
@@ -142,6 +160,52 @@ struct configfs_attribute {
 	.show	= _show,						\
 	.store	= _store,						\
 }
+/* Here is a readonly version, only requiring a show() operation */
+#define __CONFIGFS_ATTR_RO(_name, _show)				\
+{									\
+	.attr	= {							\
+			.ca_name = __stringify(_name),			\
+			.ca_mode = 0444,				\
+			.ca_owner = THIS_MODULE,			\
+	},								\
+	.show	= _show,						\
+}
+
+/*
+ * With these extended attributes, the simple show_attribute() and
+ * store_attribute() operations need to call the show() and store() of the
+ * attributes.  This is a common pattern, so we provide a macro to define
+ * them.  The argument _item is the name of the config_item structure.
+ * This macro expects the attributes to be named "struct <name>_attribute"
+ * and the function to_<name>() to exist;
+ */
+#define CONFIGFS_ATTR_OPS(_item)					\
+static ssize_t _item##_attr_show(struct config_item *item,		\
+				 struct configfs_attribute *attr,	\
+				 char *page)				\
+{									\
+	struct _item *_item = to_##_item(item);				\
+	struct _item##_attribute *_item##_attr =			\
+		container_of(attr, struct _item##_attribute, attr);	\
+	ssize_t ret = 0;						\
+									\
+	if (_item##_attr->show)						\
+		ret = _item##_attr->show(_item, page);			\
+	return ret;							\
+}									\
+static ssize_t _item##_attr_store(struct config_item *item,		\
+				  struct configfs_attribute *attr,	\
+				  const char *page, size_t count)	\
+{									\
+	struct _item *_item = to_##_item(item);				\
+	struct _item##_attribute *_item##_attr =			\
+		container_of(attr, struct _item##_attribute, attr);	\
+	ssize_t ret = -EINVAL;						\
+									\
+	if (_item##_attr->store)					\
+		ret = _item##_attr->store(_item, page, count);		\
+	return ret;							\
+}
 
 /*
  * If allow_link() exists, the item can symlink(2) out to other
diff --git a/include/linux/connector.h b/include/linux/connector.h
index 96a89d3d6727..5c7f9468f753 100644
--- a/include/linux/connector.h
+++ b/include/linux/connector.h
@@ -38,8 +38,9 @@
 #define CN_W1_VAL			0x1
 #define CN_IDX_V86D			0x4
 #define CN_VAL_V86D_UVESAFB		0x1
+#define CN_IDX_BB			0x5	/* BlackBoard, from the TSP GPL sampling framework */
 
-#define CN_NETLINK_USERS		5
+#define CN_NETLINK_USERS		6
 
 /*
  * Maximum connector's message size.
diff --git a/include/linux/consolemap.h b/include/linux/consolemap.h
index e2bf7e5db39a..c4811da1338b 100644
--- a/include/linux/consolemap.h
+++ b/include/linux/consolemap.h
@@ -3,6 +3,9 @@
  *
  * Interface between console.c, selection.c  and consolemap.c
  */
+#ifndef __LINUX_CONSOLEMAP_H__
+#define __LINUX_CONSOLEMAP_H__
+
 #define LAT1_MAP 0
 #define GRAF_MAP 1
 #define IBMPC_MAP 2
@@ -10,6 +13,7 @@
 
 #include <linux/types.h>
 
+#ifdef CONFIG_CONSOLE_TRANSLATIONS
 struct vc_data;
 
 extern u16 inverse_translate(struct vc_data *conp, int glyph, int use_unicode);
@@ -18,3 +22,13 @@ extern int conv_uni_to_pc(struct vc_data *conp, long ucs);
 extern u32 conv_8bit_to_uni(unsigned char c);
 extern int conv_uni_to_8bit(u32 uni);
 void console_map_init(void);
+#else
+#define inverse_translate(conp, glyph, uni) ((uint16_t)glyph)
+#define set_translate(m, vc) ((unsigned short *)NULL)
+#define conv_uni_to_pc(conp, ucs) ((int) (ucs > 0xff ? -1: ucs))
+#define conv_8bit_to_uni(c) ((uint32_t)(c))
+#define conv_uni_to_8bit(c) ((int) ((c) & 0xff))
+#define console_map_init(c) do { ; } while (0)
+#endif /* CONFIG_CONSOLE_TRANSLATIONS */
+
+#endif /* __LINUX_CONSOLEMAP_H__ */
diff --git a/include/linux/cpu.h b/include/linux/cpu.h
index 7464ba3b4333..d7faf8808497 100644
--- a/include/linux/cpu.h
+++ b/include/linux/cpu.h
@@ -69,10 +69,11 @@ static inline void unregister_cpu_notifier(struct notifier_block *nb)
 #endif
 
 int cpu_up(unsigned int cpu);
-
 extern void cpu_hotplug_init(void);
+extern void cpu_maps_update_begin(void);
+extern void cpu_maps_update_done(void);
 
-#else
+#else	/* CONFIG_SMP */
 
 static inline int register_cpu_notifier(struct notifier_block *nb)
 {
@@ -87,10 +88,16 @@ static inline void cpu_hotplug_init(void)
 {
 }
 
+static inline void cpu_maps_update_begin(void)
+{
+}
+
+static inline void cpu_maps_update_done(void)
+{
+}
+
 #endif /* CONFIG_SMP */
 extern struct sysdev_class cpu_sysdev_class;
-extern void cpu_maps_update_begin(void);
-extern void cpu_maps_update_done(void);
 
 #ifdef CONFIG_HOTPLUG_CPU
 /* Stop CPUs going up and down. */
diff --git a/include/linux/cpufreq.h b/include/linux/cpufreq.h
index 2270ca5ec631..6fd5668aa572 100644
--- a/include/linux/cpufreq.h
+++ b/include/linux/cpufreq.h
@@ -106,6 +106,7 @@ struct cpufreq_policy {
 #define CPUFREQ_ADJUST		(0)
 #define CPUFREQ_INCOMPATIBLE	(1)
 #define CPUFREQ_NOTIFY		(2)
+#define CPUFREQ_START		(3)
 
 #define CPUFREQ_SHARED_TYPE_NONE (0) /* None */
 #define CPUFREQ_SHARED_TYPE_HW	 (1) /* HW does needed coordination */
diff --git a/include/linux/cpumask.h b/include/linux/cpumask.h
index 1b5c98e7fef7..d3219d73f8e6 100644
--- a/include/linux/cpumask.h
+++ b/include/linux/cpumask.h
@@ -62,15 +62,7 @@
  * int next_cpu_nr(cpu, mask)		Next cpu past 'cpu', or nr_cpu_ids
  *
  * cpumask_t cpumask_of_cpu(cpu)	Return cpumask with bit 'cpu' set
- *ifdef CONFIG_HAS_CPUMASK_OF_CPU
- * cpumask_of_cpu_ptr_declare(v)	Declares cpumask_t *v
- * cpumask_of_cpu_ptr_next(v, cpu)	Sets v = &cpumask_of_cpu_map[cpu]
- * cpumask_of_cpu_ptr(v, cpu)		Combines above two operations
- *else
- * cpumask_of_cpu_ptr_declare(v)	Declares cpumask_t _v and *v = &_v
- * cpumask_of_cpu_ptr_next(v, cpu)	Sets _v = cpumask_of_cpu(cpu)
- * cpumask_of_cpu_ptr(v, cpu)		Combines above two operations
- *endif
+ *					(can be used as an lvalue)
  * CPU_MASK_ALL				Initializer - all bits set
  * CPU_MASK_NONE			Initializer - no bits set
  * unsigned long *cpus_addr(mask)	Array of unsigned long's in mask
@@ -273,37 +265,30 @@ static inline void __cpus_shift_left(cpumask_t *dstp,
 	bitmap_shift_left(dstp->bits, srcp->bits, n, nbits);
 }
 
+/*
+ * Special-case data structure for "single bit set only" constant CPU masks.
+ *
+ * We pre-generate all the 64 (or 32) possible bit positions, with enough
+ * padding to the left and the right, and return the constant pointer
+ * appropriately offset.
+ */
+extern const unsigned long
+	cpu_bit_bitmap[BITS_PER_LONG+1][BITS_TO_LONGS(NR_CPUS)];
+
+static inline const cpumask_t *get_cpu_mask(unsigned int cpu)
+{
+	const unsigned long *p = cpu_bit_bitmap[1 + cpu % BITS_PER_LONG];
+	p -= cpu / BITS_PER_LONG;
+	return (const cpumask_t *)p;
+}
+
+/*
+ * In cases where we take the address of the cpumask immediately,
+ * gcc optimizes it out (it's a constant) and there's no huge stack
+ * variable created:
+ */
+#define cpumask_of_cpu(cpu) (*get_cpu_mask(cpu))
 
-#ifdef CONFIG_HAVE_CPUMASK_OF_CPU_MAP
-extern cpumask_t *cpumask_of_cpu_map;
-#define cpumask_of_cpu(cpu)	(cpumask_of_cpu_map[cpu])
-#define	cpumask_of_cpu_ptr(v, cpu)					\
-		const cpumask_t *v = &cpumask_of_cpu(cpu)
-#define	cpumask_of_cpu_ptr_declare(v)					\
-		const cpumask_t *v
-#define cpumask_of_cpu_ptr_next(v, cpu)					\
-					v = &cpumask_of_cpu(cpu)
-#else
-#define cpumask_of_cpu(cpu)						\
-({									\
-	typeof(_unused_cpumask_arg_) m;					\
-	if (sizeof(m) == sizeof(unsigned long)) {			\
-		m.bits[0] = 1UL<<(cpu);					\
-	} else {							\
-		cpus_clear(m);						\
-		cpu_set((cpu), m);					\
-	}								\
-	m;								\
-})
-#define	cpumask_of_cpu_ptr(v, cpu) 					\
-		cpumask_t _##v = cpumask_of_cpu(cpu);			\
-		const cpumask_t *v = &_##v
-#define	cpumask_of_cpu_ptr_declare(v)					\
-		cpumask_t _##v;						\
-		const cpumask_t *v = &_##v
-#define cpumask_of_cpu_ptr_next(v, cpu)					\
-					_##v = cpumask_of_cpu(cpu)
-#endif
 
 #define CPU_MASK_LAST_WORD BITMAP_LAST_WORD_MASK(NR_CPUS)
 
diff --git a/include/linux/crash_dump.h b/include/linux/crash_dump.h
index 22c7ac5cd80c..025e4f575103 100644
--- a/include/linux/crash_dump.h
+++ b/include/linux/crash_dump.h
@@ -8,7 +8,13 @@
 #include <linux/proc_fs.h>
 
 #define ELFCORE_ADDR_MAX	(-1ULL)
+
+#ifdef CONFIG_PROC_VMCORE
 extern unsigned long long elfcorehdr_addr;
+#else
+static const unsigned long long elfcorehdr_addr = ELFCORE_ADDR_MAX;
+#endif
+
 extern ssize_t copy_oldmem_page(unsigned long, char *, size_t,
 						unsigned long, int);
 extern const struct file_operations proc_vmcore_operations;
@@ -22,5 +28,13 @@ extern struct proc_dir_entry *proc_vmcore;
 
 #define vmcore_elf_check_arch(x) (elf_check_arch(x) || vmcore_elf_check_arch_cross(x))
 
+static inline int is_kdump_kernel(void)
+{
+	return (elfcorehdr_addr != ELFCORE_ADDR_MAX) ? 1 : 0;
+}
+#else /* !CONFIG_CRASH_DUMP */
+static inline int is_kdump_kernel(void) { return 0; }
 #endif /* CONFIG_CRASH_DUMP */
+
+extern unsigned long saved_max_pfn;
 #endif /* LINUX_CRASHDUMP_H */
diff --git a/include/linux/cred.h b/include/linux/cred.h
new file mode 100644
index 000000000000..b69222cc1fd2
--- /dev/null
+++ b/include/linux/cred.h
@@ -0,0 +1,50 @@
+/* Credentials management
+ *
+ * Copyright (C) 2008 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+
+#ifndef _LINUX_CRED_H
+#define _LINUX_CRED_H
+
+#define get_current_user()	(get_uid(current->user))
+
+#define task_uid(task)		((task)->uid)
+#define task_gid(task)		((task)->gid)
+#define task_euid(task)		((task)->euid)
+#define task_egid(task)		((task)->egid)
+
+#define current_uid()		(current->uid)
+#define current_gid()		(current->gid)
+#define current_euid()		(current->euid)
+#define current_egid()		(current->egid)
+#define current_suid()		(current->suid)
+#define current_sgid()		(current->sgid)
+#define current_fsuid()		(current->fsuid)
+#define current_fsgid()		(current->fsgid)
+#define current_cap()		(current->cap_effective)
+
+#define current_uid_gid(_uid, _gid)		\
+do {						\
+	*(_uid) = current->uid;			\
+	*(_gid) = current->gid;			\
+} while(0)
+
+#define current_euid_egid(_uid, _gid)		\
+do {						\
+	*(_uid) = current->euid;		\
+	*(_gid) = current->egid;		\
+} while(0)
+
+#define current_fsuid_fsgid(_uid, _gid)		\
+do {						\
+	*(_uid) = current->fsuid;		\
+	*(_gid) = current->fsgid;		\
+} while(0)
+
+#endif /* _LINUX_CRED_H */
diff --git a/include/linux/dcache.h b/include/linux/dcache.h
index 98202c672fde..efba1de629ac 100644
--- a/include/linux/dcache.h
+++ b/include/linux/dcache.h
@@ -230,6 +230,7 @@ extern void d_delete(struct dentry *);
 extern struct dentry * d_alloc(struct dentry *, const struct qstr *);
 extern struct dentry * d_alloc_anon(struct inode *);
 extern struct dentry * d_splice_alias(struct inode *, struct dentry *);
+extern struct dentry * d_add_ci(struct dentry *, struct inode *, struct qstr *);
 extern void shrink_dcache_sb(struct super_block *);
 extern void shrink_dcache_parent(struct dentry *);
 extern void shrink_dcache_for_umount(struct super_block *);
diff --git a/include/linux/delayacct.h b/include/linux/delayacct.h
index ab94bc083558..f352f06fa063 100644
--- a/include/linux/delayacct.h
+++ b/include/linux/delayacct.h
@@ -39,6 +39,8 @@ extern void __delayacct_blkio_start(void);
 extern void __delayacct_blkio_end(void);
 extern int __delayacct_add_tsk(struct taskstats *, struct task_struct *);
 extern __u64 __delayacct_blkio_ticks(struct task_struct *);
+extern void __delayacct_freepages_start(void);
+extern void __delayacct_freepages_end(void);
 
 static inline int delayacct_is_task_waiting_on_io(struct task_struct *p)
 {
@@ -107,6 +109,18 @@ static inline __u64 delayacct_blkio_ticks(struct task_struct *tsk)
 	return 0;
 }
 
+static inline void delayacct_freepages_start(void)
+{
+	if (current->delays)
+		__delayacct_freepages_start();
+}
+
+static inline void delayacct_freepages_end(void)
+{
+	if (current->delays)
+		__delayacct_freepages_end();
+}
+
 #else
 static inline void delayacct_set_flag(int flag)
 {}
@@ -129,6 +143,11 @@ static inline __u64 delayacct_blkio_ticks(struct task_struct *tsk)
 { return 0; }
 static inline int delayacct_is_task_waiting_on_io(struct task_struct *p)
 { return 0; }
+static inline void delayacct_freepages_start(void)
+{}
+static inline void delayacct_freepages_end(void)
+{}
+
 #endif /* CONFIG_TASK_DELAY_ACCT */
 
 #endif
diff --git a/include/linux/device.h b/include/linux/device.h
index d24a47f80f9c..4d8372d135df 100644
--- a/include/linux/device.h
+++ b/include/linux/device.h
@@ -358,6 +358,7 @@ struct device {
 
 	struct kobject kobj;
 	char	bus_id[BUS_ID_SIZE];	/* position on parent bus */
+	const char		*init_name; /* initial name of the device */
 	struct device_type	*type;
 	unsigned		uevent_suppress:1;
 
@@ -406,7 +407,7 @@ struct device {
 /* Get the wakeup routines, which depend on struct device */
 #include <linux/pm_wakeup.h>
 
-static inline const char *dev_name(struct device *dev)
+static inline const char *dev_name(const struct device *dev)
 {
 	/* will be changed into kobject_name(&dev->kobj) in the near future */
 	return dev->bus_id;
@@ -518,7 +519,7 @@ extern void device_shutdown(void);
 extern void sysdev_shutdown(void);
 
 /* debugging and troubleshooting/diagnostic helpers. */
-extern const char *dev_driver_string(struct device *dev);
+extern const char *dev_driver_string(const struct device *dev);
 #define dev_printk(level, dev, format, arg...)	\
 	printk(level "%s %s: " format , dev_driver_string(dev) , \
 	       dev_name(dev) , ## arg)
diff --git a/include/linux/dirent.h b/include/linux/dirent.h
index 5d6023b87800..f072fb8d10a3 100644
--- a/include/linux/dirent.h
+++ b/include/linux/dirent.h
@@ -1,23 +1,6 @@
 #ifndef _LINUX_DIRENT_H
 #define _LINUX_DIRENT_H
 
-struct dirent {
-	long		d_ino;
-	__kernel_off_t	d_off;
-	unsigned short	d_reclen;
-	char		d_name[256]; /* We must not include limits.h! */
-};
-
-struct dirent64 {
-	__u64		d_ino;
-	__s64		d_off;
-	unsigned short	d_reclen;
-	unsigned char	d_type;
-	char		d_name[256];
-};
-
-#ifdef __KERNEL__
-
 struct linux_dirent64 {
 	u64		d_ino;
 	s64		d_off;
@@ -26,7 +9,4 @@ struct linux_dirent64 {
 	char		d_name[0];
 };
 
-#endif	/* __KERNEL__ */
-
-
 #endif
diff --git a/include/linux/dm9000.h b/include/linux/dm9000.h
index fc82446b6425..c30879cf93bc 100644
--- a/include/linux/dm9000.h
+++ b/include/linux/dm9000.h
@@ -27,6 +27,7 @@
 
 struct dm9000_plat_data {
 	unsigned int	flags;
+	unsigned char	dev_addr[6];
 
 	/* allow replacement IO routines */
 
diff --git a/include/linux/dmar.h b/include/linux/dmar.h
index 56c73b847551..c360c558e59e 100644
--- a/include/linux/dmar.h
+++ b/include/linux/dmar.h
@@ -25,9 +25,99 @@
 #include <linux/types.h>
 #include <linux/msi.h>
 
-#ifdef CONFIG_DMAR
+#if defined(CONFIG_DMAR) || defined(CONFIG_INTR_REMAP)
 struct intel_iommu;
 
+struct dmar_drhd_unit {
+	struct list_head list;		/* list of drhd units	*/
+	struct  acpi_dmar_header *hdr;	/* ACPI header		*/
+	u64	reg_base_addr;		/* register base address*/
+	struct	pci_dev **devices; 	/* target device array	*/
+	int	devices_cnt;		/* target device count	*/
+	u8	ignored:1; 		/* ignore drhd		*/
+	u8	include_all:1;
+	struct intel_iommu *iommu;
+};
+
+extern struct list_head dmar_drhd_units;
+
+#define for_each_drhd_unit(drhd) \
+	list_for_each_entry(drhd, &dmar_drhd_units, list)
+
+extern int dmar_table_init(void);
+extern int early_dmar_detect(void);
+extern int dmar_dev_scope_init(void);
+
+/* Intel IOMMU detection */
+extern void detect_intel_iommu(void);
+
+
+extern int parse_ioapics_under_ir(void);
+extern int alloc_iommu(struct dmar_drhd_unit *);
+#else
+static inline void detect_intel_iommu(void)
+{
+	return;
+}
+
+static inline int dmar_table_init(void)
+{
+	return -ENODEV;
+}
+#endif /* !CONFIG_DMAR && !CONFIG_INTR_REMAP */
+
+#ifdef CONFIG_INTR_REMAP
+extern int intr_remapping_enabled;
+extern int enable_intr_remapping(int);
+
+struct irte {
+	union {
+		struct {
+			__u64	present 	: 1,
+				fpd		: 1,
+				dst_mode	: 1,
+				redir_hint	: 1,
+				trigger_mode	: 1,
+				dlvry_mode	: 3,
+				avail		: 4,
+				__reserved_1	: 4,
+				vector		: 8,
+				__reserved_2	: 8,
+				dest_id		: 32;
+		};
+		__u64 low;
+	};
+
+	union {
+		struct {
+			__u64	sid		: 16,
+				sq		: 2,
+				svt		: 2,
+				__reserved_3	: 44;
+		};
+		__u64 high;
+	};
+};
+extern int get_irte(int irq, struct irte *entry);
+extern int modify_irte(int irq, struct irte *irte_modified);
+extern int alloc_irte(struct intel_iommu *iommu, int irq, u16 count);
+extern int set_irte_irq(int irq, struct intel_iommu *iommu, u16 index,
+   			u16 sub_handle);
+extern int map_irq_to_irte_handle(int irq, u16 *sub_handle);
+extern int clear_irte_irq(int irq, struct intel_iommu *iommu, u16 index);
+extern int flush_irte(int irq);
+extern int free_irte(int irq);
+
+extern int irq_remapped(int irq);
+extern struct intel_iommu *map_dev_to_ir(struct pci_dev *dev);
+extern struct intel_iommu *map_ioapic_to_ir(int apic);
+#else
+#define irq_remapped(irq)		(0)
+#define enable_intr_remapping(mode)	(-1)
+#define intr_remapping_enabled		(0)
+#endif
+
+#ifdef CONFIG_DMAR
 extern const char *dmar_get_fault_reason(u8 fault_reason);
 
 /* Can't use the common MSI interrupt functions
@@ -40,47 +130,30 @@ extern void dmar_msi_write(int irq, struct msi_msg *msg);
 extern int dmar_set_interrupt(struct intel_iommu *iommu);
 extern int arch_setup_dmar_msi(unsigned int irq);
 
-/* Intel IOMMU detection and initialization functions */
-extern void detect_intel_iommu(void);
-extern int intel_iommu_init(void);
-
-extern int dmar_table_init(void);
-extern int early_dmar_detect(void);
-
-extern struct list_head dmar_drhd_units;
+extern int iommu_detected, no_iommu;
 extern struct list_head dmar_rmrr_units;
-
-struct dmar_drhd_unit {
-	struct list_head list;		/* list of drhd units	*/
-	u64	reg_base_addr;		/* register base address*/
-	struct	pci_dev **devices; 	/* target device array	*/
-	int	devices_cnt;		/* target device count	*/
-	u8	ignored:1; 		/* ignore drhd		*/
-	u8	include_all:1;
-	struct intel_iommu *iommu;
-};
-
 struct dmar_rmrr_unit {
 	struct list_head list;		/* list of rmrr units	*/
+	struct acpi_dmar_header *hdr;	/* ACPI header		*/
 	u64	base_address;		/* reserved base address*/
 	u64	end_address;		/* reserved end address */
 	struct pci_dev **devices;	/* target devices */
 	int	devices_cnt;		/* target device count */
 };
 
-#define for_each_drhd_unit(drhd) \
-	list_for_each_entry(drhd, &dmar_drhd_units, list)
 #define for_each_rmrr_units(rmrr) \
 	list_for_each_entry(rmrr, &dmar_rmrr_units, list)
+/* Intel DMAR  initialization functions */
+extern int intel_iommu_init(void);
+extern int dmar_disabled;
 #else
-static inline void detect_intel_iommu(void)
-{
-	return;
-}
 static inline int intel_iommu_init(void)
 {
+#ifdef CONFIG_INTR_REMAP
+	return dmar_dev_scope_init();
+#else
 	return -ENODEV;
+#endif
 }
-
 #endif /* !CONFIG_DMAR */
 #endif /* __DMAR_H__ */
diff --git a/include/linux/ethtool.h b/include/linux/ethtool.h
index 8bb5e87df365..b4b038b89ee6 100644
--- a/include/linux/ethtool.h
+++ b/include/linux/ethtool.h
@@ -27,9 +27,24 @@ struct ethtool_cmd {
 	__u8	autoneg;	/* Enable or disable autonegotiation */
 	__u32	maxtxpkt;	/* Tx pkts before generating tx int */
 	__u32	maxrxpkt;	/* Rx pkts before generating rx int */
-	__u32	reserved[4];
+	__u16	speed_hi;
+	__u16	reserved2;
+	__u32	reserved[3];
 };
 
+static inline void ethtool_cmd_speed_set(struct ethtool_cmd *ep,
+						__u32 speed)
+{
+
+	ep->speed = (__u16)speed;
+	ep->speed_hi = (__u16)(speed >> 16);
+}
+
+static inline __u32 ethtool_cmd_speed(struct ethtool_cmd *ep)
+{
+	return (ep->speed_hi << 16) | ep->speed;
+}
+
 #define ETHTOOL_BUSINFO_LEN	32
 /* these strings are set to whatever the driver author decides... */
 struct ethtool_drvinfo {
diff --git a/include/linux/exportfs.h b/include/linux/exportfs.h
index f5abd1306638..27e772cefb6a 100644
--- a/include/linux/exportfs.h
+++ b/include/linux/exportfs.h
@@ -35,6 +35,27 @@ enum fid_type {
 	FILEID_INO32_GEN_PARENT = 2,
 
 	/*
+	 * 64 bit object ID, 64 bit root object ID,
+	 * 32 bit generation number.
+	 */
+	FILEID_BTRFS_WITHOUT_PARENT = 0x4d,
+
+	/*
+	 * 64 bit object ID, 64 bit root object ID,
+	 * 32 bit generation number,
+	 * 64 bit parent object ID, 32 bit parent generation.
+	 */
+	FILEID_BTRFS_WITH_PARENT = 0x4e,
+
+	/*
+	 * 64 bit object ID, 64 bit root object ID,
+	 * 32 bit generation number,
+	 * 64 bit parent object ID, 32 bit parent generation,
+	 * 64 bit parent root object ID.
+	 */
+	FILEID_BTRFS_WITH_PARENT_ROOT = 0x4f,
+
+	/*
 	 * 32 bit block number, 16 bit partition reference,
 	 * 16 bit unused, 32 bit generation number.
 	 */
diff --git a/include/linux/ext2_fs.h b/include/linux/ext2_fs.h
index 84cec2aa9f1e..2efe7b863cff 100644
--- a/include/linux/ext2_fs.h
+++ b/include/linux/ext2_fs.h
@@ -284,8 +284,8 @@ struct ext2_inode {
 
 #ifdef	__hurd__
 #define i_translator	osd1.hurd1.h_i_translator
-#define i_frag		osd2.hurd2.h_i_frag;
-#define i_fsize		osd2.hurd2.h_i_fsize;
+#define i_frag		osd2.hurd2.h_i_frag
+#define i_fsize		osd2.hurd2.h_i_fsize
 #define i_uid_high	osd2.hurd2.h_i_uid_high
 #define i_gid_high	osd2.hurd2.h_i_gid_high
 #define i_author	osd2.hurd2.h_i_author
diff --git a/include/linux/ext3_fs.h b/include/linux/ext3_fs.h
index 36c540396377..80171ee89a22 100644
--- a/include/linux/ext3_fs.h
+++ b/include/linux/ext3_fs.h
@@ -832,6 +832,7 @@ extern void ext3_discard_reservation (struct inode *);
 extern void ext3_dirty_inode(struct inode *);
 extern int ext3_change_inode_journal_flag(struct inode *, int);
 extern int ext3_get_inode_loc(struct inode *, struct ext3_iloc *);
+extern int ext3_can_truncate(struct inode *inode);
 extern void ext3_truncate (struct inode *);
 extern void ext3_set_inode_flags(struct inode *);
 extern void ext3_get_inode_flags(struct ext3_inode_info *);
diff --git a/include/linux/fb.h b/include/linux/fb.h
index 3b8870e32afd..531ccd5f5960 100644
--- a/include/linux/fb.h
+++ b/include/linux/fb.h
@@ -976,6 +976,9 @@ static inline void __fb_pad_aligned_buffer(u8 *dst, u32 d_pitch,
 
 /* drivers/video/fb_defio.c */
 extern void fb_deferred_io_init(struct fb_info *info);
+extern void fb_deferred_io_open(struct fb_info *info,
+				struct inode *inode,
+				struct file *file);
 extern void fb_deferred_io_cleanup(struct fb_info *info);
 extern int fb_deferred_io_fsync(struct file *file, struct dentry *dentry,
 				int datasync);
diff --git a/include/linux/fd1772.h b/include/linux/fd1772.h
deleted file mode 100644
index 871d6e4c677e..000000000000
--- a/include/linux/fd1772.h
+++ /dev/null
@@ -1,80 +0,0 @@
-#ifndef _LINUX_FD1772REG_H
-#define _LINUX_FD1772REG_H
-
-/*
-** WD1772 stuff - originally from the M68K Linux
- * Modified for Archimedes by Dave Gilbert (gilbertd@cs.man.ac.uk)
- */
-
-/* register codes */
-
-#define FDC1772SELREG_STP   (0x80)   /* command/status register */
-#define FDC1772SELREG_TRA   (0x82)   /* track register */
-#define FDC1772SELREG_SEC   (0x84)   /* sector register */
-#define FDC1772SELREG_DTA   (0x86)   /* data register */
-
-/* register names for FDC1772_READ/WRITE macros */
-
-#define FDC1772REG_CMD         0
-#define FDC1772REG_STATUS      0
-#define FDC1772REG_TRACK       2
-#define FDC1772REG_SECTOR      4
-#define FDC1772REG_DATA                6
-
-/* command opcodes */
-
-#define FDC1772CMD_RESTORE  (0x00)   /*  -                   */
-#define FDC1772CMD_SEEK     (0x10)   /*   |                  */
-#define FDC1772CMD_STEP     (0x20)   /*   |  TYP 1 Commands  */
-#define FDC1772CMD_STIN     (0x40)   /*   |                  */
-#define FDC1772CMD_STOT     (0x60)   /*  -                   */
-#define FDC1772CMD_RDSEC    (0x80)   /*  -   TYP 2 Commands  */
-#define FDC1772CMD_WRSEC    (0xa0)   /*  -          "        */
-#define FDC1772CMD_RDADR    (0xc0)   /*  -                   */
-#define FDC1772CMD_RDTRA    (0xe0)   /*   |  TYP 3 Commands  */
-#define FDC1772CMD_WRTRA    (0xf0)   /*  -                   */
-#define FDC1772CMD_FORCI    (0xd0)   /*  -   TYP 4 Command   */
-
-/* command modifier bits */
-
-#define FDC1772CMDADD_SR6   (0x00)   /* step rate settings */
-#define FDC1772CMDADD_SR12  (0x01)
-#define FDC1772CMDADD_SR2   (0x02)
-#define FDC1772CMDADD_SR3   (0x03)
-#define FDC1772CMDADD_V     (0x04)   /* verify */
-#define FDC1772CMDADD_H     (0x08)   /* wait for spin-up */
-#define FDC1772CMDADD_U     (0x10)   /* update track register */
-#define FDC1772CMDADD_M     (0x10)   /* multiple sector access */
-#define FDC1772CMDADD_E     (0x04)   /* head settling flag */
-#define FDC1772CMDADD_P     (0x02)   /* precompensation */
-#define FDC1772CMDADD_A0    (0x01)   /* DAM flag */
-
-/* status register bits */
-
-#define        FDC1772STAT_MOTORON     (0x80)   /* motor on */
-#define        FDC1772STAT_WPROT       (0x40)   /* write protected (FDC1772CMD_WR*) */
-#define        FDC1772STAT_SPINUP      (0x20)   /* motor speed stable (Type I) */
-#define        FDC1772STAT_DELDAM      (0x20)   /* sector has deleted DAM (Type II+III) */
-#define        FDC1772STAT_RECNF       (0x10)   /* record not found */
-#define        FDC1772STAT_CRC         (0x08)   /* CRC error */
-#define        FDC1772STAT_TR00        (0x04)   /* Track 00 flag (Type I) */
-#define        FDC1772STAT_LOST        (0x04)   /* Lost Data (Type II+III) */
-#define        FDC1772STAT_IDX         (0x02)   /* Index status (Type I) */
-#define        FDC1772STAT_DRQ         (0x02)   /* DRQ status (Type II+III) */
-#define        FDC1772STAT_BUSY        (0x01)   /* FDC1772 is busy */
-
-
-/* PSG Port A Bit Nr 0 .. Side Sel .. 0 -> Side 1  1 -> Side 2 */
-#define DSKSIDE     (0x01)
-        
-#define DSKDRVNONE  (0x06)
-#define DSKDRV0     (0x02)
-#define DSKDRV1     (0x04)
-
-/* step rates */
-#define        FDC1772STEP_6   0x00
-#define        FDC1772STEP_12  0x01
-#define        FDC1772STEP_2   0x02
-#define        FDC1772STEP_3   0x03
-
-#endif
diff --git a/include/linux/file.h b/include/linux/file.h
index 27c64bdc68c9..a20259e248a5 100644
--- a/include/linux/file.h
+++ b/include/linux/file.h
@@ -34,8 +34,9 @@ extern struct file *fget(unsigned int fd);
 extern struct file *fget_light(unsigned int fd, int *fput_needed);
 extern void set_close_on_exec(unsigned int fd, int flag);
 extern void put_filp(struct file *);
+extern int alloc_fd(unsigned start, unsigned flags);
 extern int get_unused_fd(void);
-extern int get_unused_fd_flags(int flags);
+#define get_unused_fd_flags(flags) alloc_fd(0, (flags))
 extern void put_unused_fd(unsigned int fd);
 
 extern void fd_install(unsigned int fd, struct file *file);
diff --git a/include/linux/firmware-map.h b/include/linux/firmware-map.h
index acbdbcc16051..6e199c8dfacc 100644
--- a/include/linux/firmware-map.h
+++ b/include/linux/firmware-map.h
@@ -24,34 +24,8 @@
  */
 #ifdef CONFIG_FIRMWARE_MEMMAP
 
-/**
- * Adds a firmware mapping entry. This function uses kmalloc() for memory
- * allocation. Use firmware_map_add_early() if you want to use the bootmem
- * allocator.
- *
- * That function must be called before late_initcall.
- *
- * @start: Start of the memory range.
- * @end:   End of the memory range (inclusive).
- * @type:  Type of the memory range.
- *
- * Returns 0 on success, or -ENOMEM if no memory could be allocated.
- */
 int firmware_map_add(resource_size_t start, resource_size_t end,
 		     const char *type);
-
-/**
- * Adds a firmware mapping entry. This function uses the bootmem allocator
- * for memory allocation. Use firmware_map_add() if you want to use kmalloc().
- *
- * That function must be called before late_initcall.
- *
- * @start: Start of the memory range.
- * @end:   End of the memory range (inclusive).
- * @type:  Type of the memory range.
- *
- * Returns 0 on success, or -ENOMEM if no memory could be allocated.
- */
 int firmware_map_add_early(resource_size_t start, resource_size_t end,
 			   const char *type);
 
diff --git a/include/linux/fs.h b/include/linux/fs.h
index 4b86f806014c..580b513668fe 100644
--- a/include/linux/fs.h
+++ b/include/linux/fs.h
@@ -60,6 +60,8 @@ extern int dir_notify_enable;
 #define MAY_WRITE 2
 #define MAY_READ 4
 #define MAY_APPEND 8
+#define MAY_ACCESS 16
+#define MAY_OPEN 32
 
 #define FMODE_READ 1
 #define FMODE_WRITE 2
@@ -277,7 +279,7 @@ extern int dir_notify_enable;
 #include <linux/types.h>
 #include <linux/kdev_t.h>
 #include <linux/dcache.h>
-#include <linux/namei.h>
+#include <linux/path.h>
 #include <linux/stat.h>
 #include <linux/cache.h>
 #include <linux/kobject.h>
@@ -318,22 +320,23 @@ typedef void (dio_iodone_t)(struct kiocb *iocb, loff_t offset,
  * Attribute flags.  These should be or-ed together to figure out what
  * has been changed!
  */
-#define ATTR_MODE	1
-#define ATTR_UID	2
-#define ATTR_GID	4
-#define ATTR_SIZE	8
-#define ATTR_ATIME	16
-#define ATTR_MTIME	32
-#define ATTR_CTIME	64
-#define ATTR_ATIME_SET	128
-#define ATTR_MTIME_SET	256
-#define ATTR_FORCE	512	/* Not a change, but a change it */
-#define ATTR_ATTR_FLAG	1024
-#define ATTR_KILL_SUID	2048
-#define ATTR_KILL_SGID	4096
-#define ATTR_FILE	8192
-#define ATTR_KILL_PRIV	16384
-#define ATTR_OPEN	32768	/* Truncating from open(O_TRUNC) */
+#define ATTR_MODE	(1 << 0)
+#define ATTR_UID	(1 << 1)
+#define ATTR_GID	(1 << 2)
+#define ATTR_SIZE	(1 << 3)
+#define ATTR_ATIME	(1 << 4)
+#define ATTR_MTIME	(1 << 5)
+#define ATTR_CTIME	(1 << 6)
+#define ATTR_ATIME_SET	(1 << 7)
+#define ATTR_MTIME_SET	(1 << 8)
+#define ATTR_FORCE	(1 << 9) /* Not a change, but a change it */
+#define ATTR_ATTR_FLAG	(1 << 10)
+#define ATTR_KILL_SUID	(1 << 11)
+#define ATTR_KILL_SGID	(1 << 12)
+#define ATTR_FILE	(1 << 13)
+#define ATTR_KILL_PRIV	(1 << 14)
+#define ATTR_OPEN	(1 << 15) /* Truncating from open(O_TRUNC) */
+#define ATTR_TIMES_SET	(1 << 16)
 
 /*
  * This is the Inode Attributes structure, used for notify_change().  It
@@ -440,6 +443,27 @@ static inline size_t iov_iter_count(struct iov_iter *i)
 	return i->count;
 }
 
+/*
+ * "descriptor" for what we're up to with a read.
+ * This allows us to use the same read code yet
+ * have multiple different users of the data that
+ * we read from a file.
+ *
+ * The simplest case just copies the data to user
+ * mode.
+ */
+typedef struct {
+	size_t written;
+	size_t count;
+	union {
+		char __user *buf;
+		void *data;
+	} arg;
+	int error;
+} read_descriptor_t;
+
+typedef int (*read_actor_t)(read_descriptor_t *, struct page *,
+		unsigned long, unsigned long);
 
 struct address_space_operations {
 	int (*writepage)(struct page *page, struct writeback_control *wbc);
@@ -481,6 +505,8 @@ struct address_space_operations {
 	int (*migratepage) (struct address_space *,
 			struct page *, struct page *);
 	int (*launder_page) (struct page *);
+	int (*is_partially_uptodate) (struct page *, read_descriptor_t *,
+					unsigned long);
 };
 
 /*
@@ -499,7 +525,7 @@ struct backing_dev_info;
 struct address_space {
 	struct inode		*host;		/* owner: inode, block_device */
 	struct radix_tree_root	page_tree;	/* radix tree of all pages */
-	rwlock_t		tree_lock;	/* and rwlock protecting it */
+	spinlock_t		tree_lock;	/* and lock protecting it */
 	unsigned int		i_mmap_writable;/* count VM_SHARED mappings */
 	struct prio_tree_root	i_mmap;		/* tree of private and shared mappings */
 	struct list_head	i_mmap_nonlinear;/*list VM_NONLINEAR mappings */
@@ -792,7 +818,7 @@ struct file {
 #define f_dentry	f_path.dentry
 #define f_vfsmnt	f_path.mnt
 	const struct file_operations	*f_op;
-	atomic_t		f_count;
+	atomic_long_t		f_count;
 	unsigned int 		f_flags;
 	mode_t			f_mode;
 	loff_t			f_pos;
@@ -821,8 +847,8 @@ extern spinlock_t files_lock;
 #define file_list_lock() spin_lock(&files_lock);
 #define file_list_unlock() spin_unlock(&files_lock);
 
-#define get_file(x)	atomic_inc(&(x)->f_count)
-#define file_count(x)	atomic_read(&(x)->f_count)
+#define get_file(x)	atomic_long_inc(&(x)->f_count)
+#define file_count(x)	atomic_long_read(&(x)->f_count)
 
 #ifdef CONFIG_DEBUG_WRITECOUNT
 static inline void file_take_write(struct file *f)
@@ -886,6 +912,12 @@ static inline int file_check_writeable(struct file *filp)
 #define FL_SLEEP	128	/* A blocking lock */
 
 /*
+ * Special return value from posix_lock_file() and vfs_lock_file() for
+ * asynchronous locking.
+ */
+#define FILE_LOCK_DEFERRED 1
+
+/*
  * The POSIX file lock owner is determined by
  * the "struct files_struct" in the thread group
  * (or NULL for no owner - BSD locks).
@@ -1130,7 +1162,7 @@ extern int vfs_permission(struct nameidata *, int);
 extern int vfs_create(struct inode *, struct dentry *, int, struct nameidata *);
 extern int vfs_mkdir(struct inode *, struct dentry *, int);
 extern int vfs_mknod(struct inode *, struct dentry *, int, dev_t);
-extern int vfs_symlink(struct inode *, struct dentry *, const char *, int);
+extern int vfs_symlink(struct inode *, struct dentry *, const char *);
 extern int vfs_link(struct dentry *, struct inode *, struct dentry *);
 extern int vfs_rmdir(struct inode *, struct dentry *);
 extern int vfs_unlink(struct inode *, struct dentry *);
@@ -1189,27 +1221,6 @@ struct block_device_operations {
 	struct module *owner;
 };
 
-/*
- * "descriptor" for what we're up to with a read.
- * This allows us to use the same read code yet
- * have multiple different users of the data that
- * we read from a file.
- *
- * The simplest case just copies the data to user
- * mode.
- */
-typedef struct {
-	size_t written;
-	size_t count;
-	union {
-		char __user * buf;
-		void *data;
-	} arg;
-	int error;
-} read_descriptor_t;
-
-typedef int (*read_actor_t)(read_descriptor_t *, struct page *, unsigned long, unsigned long);
-
 /* These macros are for out of kernel modules to test that
  * the kernel supports the unlocked_ioctl and compat_ioctl
  * fields in struct file_operations. */
@@ -1266,7 +1277,7 @@ struct inode_operations {
 	void * (*follow_link) (struct dentry *, struct nameidata *);
 	void (*put_link) (struct dentry *, struct nameidata *, void *);
 	void (*truncate) (struct inode *);
-	int (*permission) (struct inode *, int, struct nameidata *);
+	int (*permission) (struct inode *, int);
 	int (*setattr) (struct dentry *, struct iattr *);
 	int (*getattr) (struct vfsmount *mnt, struct dentry *, struct kstat *);
 	int (*setxattr) (struct dentry *, const char *,const void *,size_t,int);
@@ -1690,9 +1701,9 @@ extern void init_special_inode(struct inode *, umode_t, dev_t);
 extern void make_bad_inode(struct inode *);
 extern int is_bad_inode(struct inode *);
 
-extern const struct file_operations read_fifo_fops;
-extern const struct file_operations write_fifo_fops;
-extern const struct file_operations rdwr_fifo_fops;
+extern const struct file_operations read_pipefifo_fops;
+extern const struct file_operations write_pipefifo_fops;
+extern const struct file_operations rdwr_pipefifo_fops;
 
 extern int fs_may_remount_ro(struct super_block *);
 
@@ -1761,7 +1772,7 @@ extern int do_remount_sb(struct super_block *sb, int flags,
 extern sector_t bmap(struct inode *, sector_t);
 #endif
 extern int notify_change(struct dentry *, struct iattr *);
-extern int permission(struct inode *, int, struct nameidata *);
+extern int inode_permission(struct inode *, int);
 extern int generic_permission(struct inode *, int,
 		int (*check_acl)(struct inode *, int));
 
@@ -1825,7 +1836,7 @@ extern void clear_inode(struct inode *);
 extern void destroy_inode(struct inode *);
 extern struct inode *new_inode(struct super_block *);
 extern int should_remove_suid(struct dentry *);
-extern int remove_suid(struct dentry *);
+extern int file_remove_suid(struct file *);
 
 extern void __insert_inode_hash(struct inode *, unsigned long hashval);
 extern void remove_inode_hash(struct inode *);
diff --git a/include/linux/fs_struct.h b/include/linux/fs_struct.h
index 282f54219129..9e5a06e78d02 100644
--- a/include/linux/fs_struct.h
+++ b/include/linux/fs_struct.h
@@ -7,7 +7,7 @@ struct fs_struct {
 	atomic_t count;
 	rwlock_t lock;
 	int umask;
-	struct path root, pwd, altroot;
+	struct path root, pwd;
 };
 
 #define INIT_FS {				\
@@ -19,7 +19,6 @@ struct fs_struct {
 extern struct kmem_cache *fs_cachep;
 
 extern void exit_fs(struct task_struct *);
-extern void set_fs_altroot(void);
 extern void set_fs_root(struct fs_struct *, struct path *);
 extern void set_fs_pwd(struct fs_struct *, struct path *);
 extern struct fs_struct *copy_fs_struct(struct fs_struct *);
diff --git a/include/linux/fs_uart_pd.h b/include/linux/fs_uart_pd.h
index 809bb9ffc788..36b61ff39277 100644
--- a/include/linux/fs_uart_pd.h
+++ b/include/linux/fs_uart_pd.h
@@ -12,7 +12,6 @@
 #ifndef FS_UART_PD_H
 #define FS_UART_PD_H
 
-#include <linux/version.h>
 #include <asm/types.h>
 
 enum fs_uart_id {
diff --git a/include/linux/ftrace.h b/include/linux/ftrace.h
index f368d041e02d..bb384068272e 100644
--- a/include/linux/ftrace.h
+++ b/include/linux/ftrace.h
@@ -98,6 +98,27 @@ static inline void tracer_disable(void)
 #endif
 }
 
+/* Ftrace disable/restore without lock. Some synchronization mechanism
+ * must be used to prevent ftrace_enabled to be changed between
+ * disable/restore. */
+static inline int __ftrace_enabled_save(void)
+{
+#ifdef CONFIG_FTRACE
+	int saved_ftrace_enabled = ftrace_enabled;
+	ftrace_enabled = 0;
+	return saved_ftrace_enabled;
+#else
+	return 0;
+#endif
+}
+
+static inline void __ftrace_enabled_restore(int enabled)
+{
+#ifdef CONFIG_FTRACE
+	ftrace_enabled = enabled;
+#endif
+}
+
 #ifdef CONFIG_FRAME_POINTER
 /* TODO: need to fix this for ARM */
 # define CALLER_ADDR0 ((unsigned long)__builtin_return_address(0))
diff --git a/include/linux/fuse.h b/include/linux/fuse.h
index d48282197696..265635dc9908 100644
--- a/include/linux/fuse.h
+++ b/include/linux/fuse.h
@@ -104,11 +104,14 @@ struct fuse_file_lock {
 
 /**
  * INIT request/reply flags
+ *
+ * FUSE_EXPORT_SUPPORT: filesystem handles lookups of "." and ".."
  */
 #define FUSE_ASYNC_READ		(1 << 0)
 #define FUSE_POSIX_LOCKS	(1 << 1)
 #define FUSE_FILE_OPS		(1 << 2)
 #define FUSE_ATOMIC_O_TRUNC	(1 << 3)
+#define FUSE_EXPORT_SUPPORT	(1 << 4)
 #define FUSE_BIG_WRITES		(1 << 5)
 
 /**
diff --git a/include/linux/genhd.h b/include/linux/genhd.h
index e8787417f65a..be4f5e5bfe06 100644
--- a/include/linux/genhd.h
+++ b/include/linux/genhd.h
@@ -110,15 +110,6 @@ struct hd_struct {
 #define GENHD_FL_SUPPRESS_PARTITION_INFO	32
 #define GENHD_FL_FAIL				64
 
-#define BLK_SCSI_MAX_CMDS	(256)
-#define BLK_SCSI_CMD_PER_LONG	(BLK_SCSI_MAX_CMDS / (sizeof(long) * 8))
-
-struct blk_scsi_cmd_filter {
-	unsigned long read_ok[BLK_SCSI_CMD_PER_LONG];
-	unsigned long write_ok[BLK_SCSI_CMD_PER_LONG];
-	struct kobject kobj;
-};
-
 struct gendisk {
 	int major;			/* major number of driver */
 	int first_minor;
@@ -128,7 +119,6 @@ struct gendisk {
 	struct hd_struct **part;	/* [indexed by minor] */
 	struct block_device_operations *fops;
 	struct request_queue *queue;
-	struct blk_scsi_cmd_filter cmd_filter;
 	void *private_data;
 	sector_t capacity;
 
@@ -541,7 +531,7 @@ extern dev_t blk_lookup_devt(const char *name, int part);
 extern char *disk_name (struct gendisk *hd, int part, char *buf);
 
 extern int rescan_partitions(struct gendisk *disk, struct block_device *bdev);
-extern void add_partition(struct gendisk *, int, sector_t, sector_t, int);
+extern int __must_check add_partition(struct gendisk *, int, sector_t, sector_t, int);
 extern void delete_partition(struct gendisk *, int);
 extern void printk_all_partitions(void);
 
diff --git a/include/linux/gpio.h b/include/linux/gpio.h
index 98be6c5762b9..730a20b83576 100644
--- a/include/linux/gpio.h
+++ b/include/linux/gpio.h
@@ -79,6 +79,19 @@ static inline void gpio_set_value_cansleep(unsigned gpio, int value)
 	WARN_ON(1);
 }
 
+static inline int gpio_export(unsigned gpio, bool direction_may_change)
+{
+	/* GPIO can never have been requested or set as {in,out}put */
+	WARN_ON(1);
+	return -EINVAL;
+}
+
+static inline void gpio_unexport(unsigned gpio)
+{
+	/* GPIO can never have been exported */
+	WARN_ON(1);
+}
+
 static inline int gpio_to_irq(unsigned gpio)
 {
 	/* GPIO can never have been requested or set as input */
diff --git a/include/linux/harrier_defs.h b/include/linux/harrier_defs.h
deleted file mode 100644
index efef11db790f..000000000000
--- a/include/linux/harrier_defs.h
+++ /dev/null
@@ -1,212 +0,0 @@
-/*
- * include/linux/harrier_defs.h
- *
- * Definitions for Motorola MCG Harrier North Bridge & Memory controller
- *
- * Author: Dale Farnsworth
- *         dale.farnsworth@mvista.com
- *
- * Extracted from asm-ppc/harrier.h by:
- * 	   Randy Vinson
- * 	   rvinson@mvista.com
- *
- * Copyright 2001-2002 MontaVista Software Inc.
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-
-#ifndef __ASMPPC_HARRIER_DEFS_H
-#define __ASMPPC_HARRIER_DEFS_H
-
-#define HARRIER_DEFAULT_XCSR_BASE	0xfeff0000
-
-#define HARRIER_VEND_DEV_ID		0x1057480b
-
-#define HARRIER_VENI_OFF		0x00
-
-#define HARRIER_REVI_OFF		0x05
-#define HARRIER_UCTL_OFF		0xd0
-#define HARRIER_XTAL64_MASK		0x02
-
-#define HARRIER_MISC_CSR_OFF		0x1c
-#define HARRIER_RSTOUT			0x01000000
-#define HARRIER_SYSCON			0x08000000
-#define HARRIER_EREADY			0x10000000
-#define HARRIER_ERDYS			0x20000000
-
-/* Function exception registers */
-#define HARRIER_FEEN_OFF		0x40	/* enable */
-#define HARRIER_FEST_OFF		0x44	/* status */
-#define HARRIER_FEMA_OFF		0x48	/* mask */
-#define HARRIER_FECL_OFF		0x4c	/* clear */
-
-#define HARRIER_FE_DMA			0x80
-#define HARRIER_FE_MIDB			0x40
-#define HARRIER_FE_MIM0			0x20
-#define HARRIER_FE_MIM1			0x10
-#define HARRIER_FE_MIP			0x08
-#define HARRIER_FE_UA0			0x04
-#define HARRIER_FE_UA1			0x02
-#define HARRIER_FE_ABT			0x01
-
-#define HARRIER_SERIAL_0_OFF		0xc0
-
-#define HARRIER_MBAR_OFF		0xe0
-#define HARRIER_MBAR_MSK		0xfffc0000
-#define HARRIER_MPIC_CSR_OFF		0xe4
-#define HARRIER_MPIC_OPI_ENABLE		0x40
-#define HARRIER_MPIC_IFEVP_OFF		0x10200
-#define HARRIER_MPIC_IFEVP_VECT_MSK	0xff
-#define HARRIER_MPIC_IFEDE_OFF		0x10210
-
-/*
- * Define the Memory Controller register offsets.
- */
-#define HARRIER_SDBA_OFF		0x110
-#define HARRIER_SDBB_OFF		0x114
-#define HARRIER_SDBC_OFF		0x118
-#define HARRIER_SDBD_OFF		0x11c
-#define HARRIER_SDBE_OFF		0x120
-#define HARRIER_SDBF_OFF		0x124
-#define HARRIER_SDBG_OFF		0x128
-#define HARRIER_SDBH_OFF		0x12c
-
-#define HARRIER_SDB_ENABLE		0x00000100
-#define HARRIER_SDB_SIZE_MASK		0xf
-#define HARRIER_SDB_SIZE_SHIFT		16
-#define HARRIER_SDB_BASE_MASK		0xff
-#define HARRIER_SDB_BASE_SHIFT		24
-
-/*
- * Define outbound register offsets.
- */
-#define HARRIER_OTAD0_OFF		0x220
-#define HARRIER_OTOF0_OFF		0x224
-#define HARRIER_OTAD1_OFF		0x228
-#define HARRIER_OTOF1_OFF		0x22c
-#define HARRIER_OTAD2_OFF		0x230
-#define HARRIER_OTOF2_OFF		0x234
-#define HARRIER_OTAD3_OFF		0x238
-#define HARRIER_OTOF3_OFF		0x23c
-
-#define HARRIER_OTADX_START_MSK		0xffff0000UL
-#define HARRIER_OTADX_END_MSK		0x0000ffffUL
-
-#define HARRIER_OTOFX_OFF_MSK		0xffff0000UL
-#define HARRIER_OTOFX_ENA		0x80UL
-#define HARRIER_OTOFX_WPE		0x10UL
-#define HARRIER_OTOFX_SGE		0x08UL
-#define HARRIER_OTOFX_RAE		0x04UL
-#define HARRIER_OTOFX_MEM		0x02UL
-#define HARRIER_OTOFX_IOM		0x01UL
-
-/*
- * Define generic message passing register offsets
- */
-/* Mirrored registers (visible from both PowerPC and PCI space) */
-#define HARRIER_XCSR_MP_BASE_OFF	0x290	/* base offset in XCSR space */
-#define HARRIER_PMEP_MP_BASE_OFF	0x100	/* base offset in PMEM space */
-#define HARRIER_MGOM0_OFF		0x00	/* outbound msg 0 */
-#define HARRIER_MGOM1_OFF		0x04	/* outbound msg 1 */
-#define HARRIER_MGOD_OFF		0x08	/* outbound doorbells */
-
-#define HARRIER_MGIM0_OFF		0x10	/* inbound msg 0 */
-#define HARRIER_MGIM1_OFF		0x14	/* inbound msg 1 */
-#define HARRIER_MGID_OFF		0x18	/* inbound doorbells */
-
-/* PowerPC-only registers */
-#define HARRIER_MGIDM_OFF		0x20	/* inbound doorbell mask */
-
-/* PCI-only registers */
-#define HARRIER_PMEP_MGST_OFF		0x20	/* (outbound) interrupt status */
-#define HARRIER_PMEP_MGMS_OFF		0x24	/* (outbound) interrupt mask */
-#define HARRIER_MG_OMI0			(1<<4)
-#define HARRIER_MG_OMI1			(1<<5)
-
-#define HARRIER_PMEP_MGODM_OFF		0x28	/* outbound doorbell mask */
-
-/*
- * Define PCI configuration space register offsets
- */
-#define HARRIER_XCSR_TO_PCFS_OFF	0x300
-
-/*
- * Define message passing attribute register offset
- */
-#define HARRIER_MPAT_OFF		0x44
-
-/*
- * Define inbound attribute register offsets.
- */
-#define HARRIER_ITSZ0_OFF		0x48
-#define HARRIER_ITAT0_OFF		0x4c
-
-#define HARRIER_ITSZ1_OFF		0x50
-#define HARRIER_ITAT1_OFF		0x54
-
-#define HARRIER_ITSZ2_OFF		0x58
-#define HARRIER_ITAT2_OFF		0x5c
-
-#define HARRIER_ITSZ3_OFF		0x60
-#define HARRIER_ITAT3_OFF		0x64
-
-/* inbound translation size constants */
-#define HARRIER_ITSZ_MSK		0xff
-#define HARRIER_ITSZ_4KB		0x00
-#define HARRIER_ITSZ_8KB		0x01
-#define HARRIER_ITSZ_16KB		0x02
-#define HARRIER_ITSZ_32KB		0x03
-#define HARRIER_ITSZ_64KB		0x04
-#define HARRIER_ITSZ_128KB		0x05
-#define HARRIER_ITSZ_256KB		0x06
-#define HARRIER_ITSZ_512KB		0x07
-#define HARRIER_ITSZ_1MB		0x08
-#define HARRIER_ITSZ_2MB		0x09
-#define HARRIER_ITSZ_4MB		0x0A
-#define HARRIER_ITSZ_8MB		0x0B
-#define HARRIER_ITSZ_16MB		0x0C
-#define HARRIER_ITSZ_32MB		0x0D
-#define HARRIER_ITSZ_64MB		0x0E
-#define HARRIER_ITSZ_128MB		0x0F
-#define HARRIER_ITSZ_256MB		0x10
-#define HARRIER_ITSZ_512MB		0x11
-#define HARRIER_ITSZ_1GB		0x12
-#define HARRIER_ITSZ_2GB		0x13
-
-/* inbound translation offset */
-#define HARRIER_ITOF_SHIFT		0x10
-#define HARRIER_ITOF_MSK		0xffff
-
-/* inbound translation atttributes */
-#define HARRIER_ITAT_PRE		(1<<3)
-#define HARRIER_ITAT_RAE		(1<<4)
-#define HARRIER_ITAT_WPE		(1<<5)
-#define HARRIER_ITAT_MEM		(1<<6)
-#define HARRIER_ITAT_ENA		(1<<7)
-#define HARRIER_ITAT_GBL		(1<<16)
-
-#define HARRIER_LBA_OFF			0x80
-#define HARRIER_LBA_MSK			(1<<31)
-
-#define HARRIER_XCSR_SIZE		1024
-
-/* macros to calculate message passing register offsets */
-#define HARRIER_MP_XCSR(x) ((u32)HARRIER_XCSR_MP_BASE_OFF + (u32)x)
-
-#define HARRIER_MP_PMEP(x) ((u32)HARRIER_PMEP_MP_BASE_OFF + (u32)x)
-
-/*
- * Define PCI configuration space register offsets
- */
-#define HARRIER_MPBAR_OFF		PCI_BASE_ADDRESS_0
-#define HARRIER_ITBAR0_OFF		PCI_BASE_ADDRESS_1
-#define HARRIER_ITBAR1_OFF		PCI_BASE_ADDRESS_2
-#define HARRIER_ITBAR2_OFF		PCI_BASE_ADDRESS_3
-#define HARRIER_ITBAR3_OFF		PCI_BASE_ADDRESS_4
-
-#define HARRIER_XCSR_CONFIG(x) ((u32)HARRIER_XCSR_TO_PCFS_OFF + (u32)x)
-
-#endif				/* __ASMPPC_HARRIER_DEFS_H */
diff --git a/include/linux/hugetlb.h b/include/linux/hugetlb.h
index 9a71d4cc88c8..32e0ef0f6e1f 100644
--- a/include/linux/hugetlb.h
+++ b/include/linux/hugetlb.h
@@ -273,7 +273,10 @@ struct hstate {};
 #define huge_page_mask(h) PAGE_MASK
 #define huge_page_order(h) 0
 #define huge_page_shift(h) PAGE_SHIFT
-#define pages_per_huge_page(h) 1
+static inline unsigned int pages_per_huge_page(struct hstate *h)
+{
+	return 1;
+}
 #endif
 
 #endif /* _LINUX_HUGETLB_H */
diff --git a/include/linux/i2c-id.h b/include/linux/i2c-id.h
index 4862398e05bf..bf34c5f4c051 100644
--- a/include/linux/i2c-id.h
+++ b/include/linux/i2c-id.h
@@ -39,7 +39,6 @@
 #define I2C_DRIVERID_SAA7111A	 8	/* video input processor	*/
 #define I2C_DRIVERID_SAA7185B	13	/* video encoder		*/
 #define I2C_DRIVERID_SAA7110	22	/* video decoder		*/
-#define I2C_DRIVERID_MGATVO	23	/* Matrox TVOut			*/
 #define I2C_DRIVERID_SAA5249	24	/* SAA5249 and compatibles	*/
 #define I2C_DRIVERID_PCF8583	25	/* real time clock		*/
 #define I2C_DRIVERID_SAB3036	26	/* SAB3036 tuner		*/
@@ -95,7 +94,6 @@
 #define I2C_HW_B_BT848		0x010005 /* BT848 video boards */
 #define I2C_HW_B_VIA		0x010007 /* Via vt82c586b */
 #define I2C_HW_B_HYDRA		0x010008 /* Apple Hydra Mac I/O */
-#define I2C_HW_B_G400		0x010009 /* Matrox G400 */
 #define I2C_HW_B_I810		0x01000a /* Intel I810 */
 #define I2C_HW_B_VOO		0x01000b /* 3dfx Voodoo 3 / Banshee */
 #define I2C_HW_B_SCX200		0x01000e /* Nat'l Semi SCx200 I2C */
diff --git a/include/linux/i2c-pnx.h b/include/linux/i2c-pnx.h
index e6e9c814da61..f13255e06406 100644
--- a/include/linux/i2c-pnx.h
+++ b/include/linux/i2c-pnx.h
@@ -12,7 +12,9 @@
 #ifndef __I2C_PNX_H__
 #define __I2C_PNX_H__
 
-#include <asm/arch/i2c.h>
+#include <linux/pm.h>
+
+struct platform_device;
 
 struct i2c_pnx_mif {
 	int			ret;		/* Return value */
diff --git a/include/linux/i2c.h b/include/linux/i2c.h
index 08be0d21864c..06115128047f 100644
--- a/include/linux/i2c.h
+++ b/include/linux/i2c.h
@@ -97,7 +97,19 @@ extern s32 i2c_smbus_write_i2c_block_data(struct i2c_client * client,
 
 /**
  * struct i2c_driver - represent an I2C device driver
+ * @id: Unique driver ID (optional)
  * @class: What kind of i2c device we instantiate (for detect)
+ * @attach_adapter: Callback for bus addition (for legacy drivers)
+ * @detach_adapter: Callback for bus removal (for legacy drivers)
+ * @detach_client: Callback for device removal (for legacy drivers)
+ * @probe: Callback for device binding (new-style drivers)
+ * @remove: Callback for device unbinding (new-style drivers)
+ * @shutdown: Callback for device shutdown
+ * @suspend: Callback for device suspend
+ * @resume: Callback for device resume
+ * @command: Callback for bus-wide signaling (optional)
+ * @driver: Device driver model driver
+ * @id_table: List of I2C devices supported by this driver
  * @detect: Callback for device detection
  * @address_data: The I2C addresses to probe, ignore or force (for detect)
  * @clients: List of detected clients we created (for i2c-core use only)
diff --git a/include/linux/i2c/max732x.h b/include/linux/i2c/max732x.h
new file mode 100644
index 000000000000..e10336631c62
--- /dev/null
+++ b/include/linux/i2c/max732x.h
@@ -0,0 +1,19 @@
+#ifndef __LINUX_I2C_MAX732X_H
+#define __LINUX_I2C_MAX732X_H
+
+/* platform data for the MAX732x 8/16-bit I/O expander driver */
+
+struct max732x_platform_data {
+	/* number of the first GPIO */
+	unsigned	gpio_base;
+
+	void		*context;	/* param to setup/teardown */
+
+	int		(*setup)(struct i2c_client *client,
+				unsigned gpio, unsigned ngpio,
+				void *context);
+	int		(*teardown)(struct i2c_client *client,
+				unsigned gpio, unsigned ngpio,
+				void *context);
+};
+#endif /* __LINUX_I2C_MAX732X_H */
diff --git a/include/linux/i2o.h b/include/linux/i2o.h
index 7d51cbca49ab..75ae6d8aba4f 100644
--- a/include/linux/i2o.h
+++ b/include/linux/i2o.h
@@ -758,7 +758,7 @@ static inline dma_addr_t i2o_dma_map_single(struct i2o_controller *c, void *ptr,
 	}
 
 	dma_addr = dma_map_single(&c->pdev->dev, ptr, size, direction);
-	if (!dma_mapping_error(dma_addr)) {
+	if (!dma_mapping_error(&c->pdev->dev, dma_addr)) {
 #ifdef CONFIG_I2O_EXT_ADAPTEC_DMA64
 		if ((sizeof(dma_addr_t) > 4) && c->pae_support) {
 			*mptr++ = cpu_to_le32(0x7C020002);
diff --git a/include/linux/ide.h b/include/linux/ide.h
index b846bc44a27e..1524829f73f2 100644
--- a/include/linux/ide.h
+++ b/include/linux/ide.h
@@ -219,18 +219,7 @@ static inline int __ide_default_irq(unsigned long base)
 #include <asm-generic/ide_iops.h>
 #endif
 
-#ifndef MAX_HWIFS
-#if defined(CONFIG_BLACKFIN) || defined(CONFIG_H8300) || defined(CONFIG_XTENSA)
-# define MAX_HWIFS	1
-#else
-# define MAX_HWIFS	10
-#endif
-#endif
-
-#if !defined(MAX_HWIFS) || defined(CONFIG_EMBEDDED)
-#undef MAX_HWIFS
-#define MAX_HWIFS	CONFIG_IDE_MAX_HWIFS
-#endif
+#define MAX_HWIFS	10
 
 /* Currently only m68k, apus and m8xx need it */
 #ifndef IDE_ARCH_ACK_INTR
@@ -509,24 +498,33 @@ struct ide_tp_ops {
 
 extern const struct ide_tp_ops default_tp_ops;
 
+/**
+ * struct ide_port_ops - IDE port operations
+ *
+ * @init_dev:		host specific initialization of a device
+ * @set_pio_mode:	routine to program host for PIO mode
+ * @set_dma_mode:	routine to program host for DMA mode
+ * @selectproc:		tweaks hardware to select drive
+ * @reset_poll:		chipset polling based on hba specifics
+ * @pre_reset:		chipset specific changes to default for device-hba resets
+ * @resetproc:		routine to reset controller after a disk reset
+ * @maskproc:		special host masking for drive selection
+ * @quirkproc:		check host's drive quirk list
+ *
+ * @mdma_filter:	filter MDMA modes
+ * @udma_filter:	filter UDMA modes
+ *
+ * @cable_detect:	detect cable type
+ */
 struct ide_port_ops {
-	/* host specific initialization of a device */
 	void	(*init_dev)(ide_drive_t *);
-	/* routine to program host for PIO mode */
 	void	(*set_pio_mode)(ide_drive_t *, const u8);
-	/* routine to program host for DMA mode */
 	void	(*set_dma_mode)(ide_drive_t *, const u8);
-	/* tweaks hardware to select drive */
 	void	(*selectproc)(ide_drive_t *);
-	/* chipset polling based on hba specifics */
 	int	(*reset_poll)(ide_drive_t *);
-	/* chipset specific changes to default for device-hba resets */
 	void	(*pre_reset)(ide_drive_t *);
-	/* routine to reset controller after a disk reset */
 	void	(*resetproc)(ide_drive_t *);
-	/* special host masking for drive selection */
 	void	(*maskproc)(ide_drive_t *, int);
-	/* check host's drive quirk list */
 	void	(*quirkproc)(ide_drive_t *);
 
 	u8	(*mdma_filter)(ide_drive_t *);
@@ -1113,7 +1111,6 @@ void ide_setup_pci_noise(struct pci_dev *, const struct ide_port_info *);
 #ifdef CONFIG_BLK_DEV_IDEDMA_PCI
 int ide_pci_set_master(struct pci_dev *, const char *);
 unsigned long ide_pci_dma_base(ide_hwif_t *, const struct ide_port_info *);
-extern const struct ide_dma_ops sff_dma_ops;
 int ide_pci_check_simplex(ide_hwif_t *, const struct ide_port_info *);
 int ide_hwif_setup_dma(ide_hwif_t *, const struct ide_port_info *);
 #else
@@ -1277,6 +1274,7 @@ extern int __ide_dma_end(ide_drive_t *);
 int ide_dma_test_irq(ide_drive_t *);
 extern void ide_dma_lost_irq(ide_drive_t *);
 extern void ide_dma_timeout(ide_drive_t *);
+extern const struct ide_dma_ops sff_dma_ops;
 #endif /* CONFIG_BLK_DEV_IDEDMA_SFF */
 
 #else
@@ -1450,8 +1448,7 @@ static inline void ide_dump_identify(u8 *id)
 
 static inline int hwif_to_node(ide_hwif_t *hwif)
 {
-	struct pci_dev *dev = to_pci_dev(hwif->dev);
-	return hwif->dev ? pcibus_to_node(dev->bus) : -1;
+	return hwif->dev ? dev_to_node(hwif->dev) : -1;
 }
 
 static inline ide_drive_t *ide_get_paired_drive(ide_drive_t *drive)
diff --git a/include/linux/idr.h b/include/linux/idr.h
index 9a2d762124de..fa035f96f2a3 100644
--- a/include/linux/idr.h
+++ b/include/linux/idr.h
@@ -15,6 +15,7 @@
 #include <linux/types.h>
 #include <linux/bitops.h>
 #include <linux/init.h>
+#include <linux/rcupdate.h>
 
 #if BITS_PER_LONG == 32
 # define IDR_BITS 5
@@ -51,6 +52,7 @@ struct idr_layer {
 	unsigned long		 bitmap; /* A zero bit means "space here" */
 	struct idr_layer	*ary[1<<IDR_BITS];
 	int			 count;	 /* When zero, we can release it */
+	struct rcu_head		 rcu_head;
 };
 
 struct idr {
@@ -71,6 +73,28 @@ struct idr {
 }
 #define DEFINE_IDR(name)	struct idr name = IDR_INIT(name)
 
+/* Actions to be taken after a call to _idr_sub_alloc */
+#define IDR_NEED_TO_GROW -2
+#define IDR_NOMORE_SPACE -3
+
+#define _idr_rc_to_errno(rc) ((rc) == -1 ? -EAGAIN : -ENOSPC)
+
+/**
+ * idr synchronization (stolen from radix-tree.h)
+ *
+ * idr_find() is able to be called locklessly, using RCU. The caller must
+ * ensure calls to this function are made within rcu_read_lock() regions.
+ * Other readers (lock-free or otherwise) and modifications may be running
+ * concurrently.
+ *
+ * It is still required that the caller manage the synchronization and
+ * lifetimes of the items. So if RCU lock-free lookups are used, typically
+ * this would mean that the items have their own locks, or are amenable to
+ * lock-free access; and that the items are freed by RCU (or only freed after
+ * having been deleted from the idr tree *and* a synchronize_rcu() grace
+ * period).
+ */
+
 /*
  * This is what we export.
  */
diff --git a/include/linux/ieee80211.h b/include/linux/ieee80211.h
index a1630ba0b87c..7f4df7c7659d 100644
--- a/include/linux/ieee80211.h
+++ b/include/linux/ieee80211.h
@@ -506,6 +506,19 @@ struct ieee80211_channel_sw_ie {
 	u8 count;
 } __attribute__ ((packed));
 
+/**
+ * struct ieee80211_tim
+ *
+ * This structure refers to "Traffic Indication Map information element"
+ */
+struct ieee80211_tim_ie {
+	u8 dtim_count;
+	u8 dtim_period;
+	u8 bitmap_ctrl;
+	/* variable size: 1 - 251 bytes */
+	u8 virtual_map[0];
+} __attribute__ ((packed));
+
 struct ieee80211_mgmt {
 	__le16 frame_control;
 	__le16 duration;
diff --git a/include/linux/if_tun.h b/include/linux/if_tun.h
index 4c6307ad9fdb..8529f57ba263 100644
--- a/include/linux/if_tun.h
+++ b/include/linux/if_tun.h
@@ -45,6 +45,7 @@
 #define TUNGETFEATURES _IOR('T', 207, unsigned int)
 #define TUNSETOFFLOAD  _IOW('T', 208, unsigned int)
 #define TUNSETTXFILTER _IOW('T', 209, unsigned int)
+#define TUNGETIFF      _IOR('T', 210, unsigned int)
 
 /* TUNSETIFF ifr flags */
 #define IFF_TUN		0x0001
diff --git a/include/linux/ihex.h b/include/linux/ihex.h
index 2baace2788a7..31d8629e75a1 100644
--- a/include/linux/ihex.h
+++ b/include/linux/ihex.h
@@ -18,7 +18,7 @@ struct ihex_binrec {
 	__be32 addr;
 	__be16 len;
 	uint8_t data[0];
-} __attribute__((aligned(4)));
+} __attribute__((packed));
 
 /* Find the next record, taking into account the 4-byte alignment */
 static inline const struct ihex_binrec *
diff --git a/include/linux/init.h b/include/linux/init.h
index 21d658cdfa27..93538b696e3d 100644
--- a/include/linux/init.h
+++ b/include/linux/init.h
@@ -139,6 +139,7 @@ extern initcall_t __con_initcall_start[], __con_initcall_end[];
 extern initcall_t __security_initcall_start[], __security_initcall_end[];
 
 /* Defined in init/main.c */
+extern int do_one_initcall(initcall_t fn);
 extern char __initdata boot_command_line[];
 extern char *saved_command_line;
 extern unsigned int reset_devices;
@@ -170,6 +171,13 @@ extern void (*late_time_init)(void);
 	__attribute__((__section__(".initcall" level ".init"))) = fn
 
 /*
+ * Early initcalls run before initializing SMP.
+ *
+ * Only for built-in code, not modules.
+ */
+#define early_initcall(fn)		__define_initcall("early",fn,early)
+
+/*
  * A "pure" initcall has no dependencies on anything else, and purely
  * initializes variables that couldn't be statically initialized.
  *
@@ -275,13 +283,7 @@ void __init parse_early_param(void);
 
 #define security_initcall(fn)		module_init(fn)
 
-/* These macros create a dummy inline: gcc 2.9x does not count alias
- as usage, hence the `unused function' warning when __init functions
- are declared static. We use the dummy __*_module_inline functions
- both to kill the warning and check the type of the init/cleanup
- function. */
-
-/* Each module must use one module_init(), or one no_module_init */
+/* Each module must use one module_init(). */
 #define module_init(initfn)					\
 	static inline initcall_t __inittest(void)		\
 	{ return initfn; }					\
diff --git a/include/linux/init_task.h b/include/linux/init_task.h
index 93c45acf249a..021d8e720c79 100644
--- a/include/linux/init_task.h
+++ b/include/linux/init_task.h
@@ -122,7 +122,7 @@ extern struct group_info init_groups;
 	.state		= 0,						\
 	.stack		= &init_thread_info,				\
 	.usage		= ATOMIC_INIT(2),				\
-	.flags		= 0,						\
+	.flags		= PF_KTHREAD,					\
 	.lock_depth	= -1,						\
 	.prio		= MAX_PRIO-20,					\
 	.static_prio	= MAX_PRIO-20,					\
diff --git a/include/linux/interrupt.h b/include/linux/interrupt.h
index 62aa4f895abe..58ff4e74b2f3 100644
--- a/include/linux/interrupt.h
+++ b/include/linux/interrupt.h
@@ -223,35 +223,6 @@ static inline int disable_irq_wake(unsigned int irq)
 #define or_softirq_pending(x)  (local_softirq_pending() |= (x))
 #endif
 
-/*
- * Temporary defines for UP kernels, until all code gets fixed.
- */
-#ifndef CONFIG_SMP
-static inline void __deprecated cli(void)
-{
-	local_irq_disable();
-}
-static inline void __deprecated sti(void)
-{
-	local_irq_enable();
-}
-static inline void __deprecated save_flags(unsigned long *x)
-{
-	local_save_flags(*x);
-}
-#define save_flags(x) save_flags(&x)
-static inline void __deprecated restore_flags(unsigned long x)
-{
-	local_irq_restore(x);
-}
-
-static inline void __deprecated save_and_cli(unsigned long *x)
-{
-	local_irq_save(*x);
-}
-#define save_and_cli(x)	save_and_cli(&x)
-#endif /* CONFIG_SMP */
-
 /* Some architectures might implement lazy enabling/disabling of
  * interrupts. In some cases, such as stop_machine, we might want
  * to ensure that after a local_irq_disable(), interrupts have
diff --git a/include/linux/ioport.h b/include/linux/ioport.h
index 2cd07cc29687..fded376b94e3 100644
--- a/include/linux/ioport.h
+++ b/include/linux/ioport.h
@@ -108,7 +108,11 @@ extern struct resource iomem_resource;
 
 extern int request_resource(struct resource *root, struct resource *new);
 extern int release_resource(struct resource *new);
+extern void reserve_region_with_split(struct resource *root,
+			     resource_size_t start, resource_size_t end,
+			     const char *name);
 extern int insert_resource(struct resource *parent, struct resource *new);
+extern void insert_resource_expand_to_fit(struct resource *root, struct resource *new);
 extern int allocate_resource(struct resource *root, struct resource *new,
 			     resource_size_t size, resource_size_t min,
 			     resource_size_t max, resource_size_t align,
@@ -118,6 +122,10 @@ extern int allocate_resource(struct resource *root, struct resource *new,
 int adjust_resource(struct resource *res, resource_size_t start,
 		    resource_size_t size);
 resource_size_t resource_alignment(struct resource *res);
+static inline resource_size_t resource_size(struct resource *res)
+{
+	return res->end - res->start + 1;
+}
 
 /* Convenience shorthand with allocation */
 #define request_region(start,n,name)	__request_region(&ioport_resource, (start), (n), (name))
diff --git a/include/linux/ip_vs.h b/include/linux/ip_vs.h
new file mode 100644
index 000000000000..ec6eb49af2d8
--- /dev/null
+++ b/include/linux/ip_vs.h
@@ -0,0 +1,245 @@
+/*
+ *      IP Virtual Server
+ *      data structure and functionality definitions
+ */
+
+#ifndef _IP_VS_H
+#define _IP_VS_H
+
+#include <linux/types.h>	/* For __beXX types in userland */
+
+#define IP_VS_VERSION_CODE	0x010201
+#define NVERSION(version)			\
+	(version >> 16) & 0xFF,			\
+	(version >> 8) & 0xFF,			\
+	version & 0xFF
+
+/*
+ *      Virtual Service Flags
+ */
+#define IP_VS_SVC_F_PERSISTENT	0x0001		/* persistent port */
+#define IP_VS_SVC_F_HASHED	0x0002		/* hashed entry */
+
+/*
+ *      Destination Server Flags
+ */
+#define IP_VS_DEST_F_AVAILABLE	0x0001		/* server is available */
+#define IP_VS_DEST_F_OVERLOAD	0x0002		/* server is overloaded */
+
+/*
+ *      IPVS sync daemon states
+ */
+#define IP_VS_STATE_NONE	0x0000		/* daemon is stopped */
+#define IP_VS_STATE_MASTER	0x0001		/* started as master */
+#define IP_VS_STATE_BACKUP	0x0002		/* started as backup */
+
+/*
+ *      IPVS socket options
+ */
+#define IP_VS_BASE_CTL		(64+1024+64)		/* base */
+
+#define IP_VS_SO_SET_NONE	IP_VS_BASE_CTL		/* just peek */
+#define IP_VS_SO_SET_INSERT	(IP_VS_BASE_CTL+1)
+#define IP_VS_SO_SET_ADD	(IP_VS_BASE_CTL+2)
+#define IP_VS_SO_SET_EDIT	(IP_VS_BASE_CTL+3)
+#define IP_VS_SO_SET_DEL	(IP_VS_BASE_CTL+4)
+#define IP_VS_SO_SET_FLUSH	(IP_VS_BASE_CTL+5)
+#define IP_VS_SO_SET_LIST	(IP_VS_BASE_CTL+6)
+#define IP_VS_SO_SET_ADDDEST	(IP_VS_BASE_CTL+7)
+#define IP_VS_SO_SET_DELDEST	(IP_VS_BASE_CTL+8)
+#define IP_VS_SO_SET_EDITDEST	(IP_VS_BASE_CTL+9)
+#define IP_VS_SO_SET_TIMEOUT	(IP_VS_BASE_CTL+10)
+#define IP_VS_SO_SET_STARTDAEMON (IP_VS_BASE_CTL+11)
+#define IP_VS_SO_SET_STOPDAEMON (IP_VS_BASE_CTL+12)
+#define IP_VS_SO_SET_RESTORE    (IP_VS_BASE_CTL+13)
+#define IP_VS_SO_SET_SAVE       (IP_VS_BASE_CTL+14)
+#define IP_VS_SO_SET_ZERO	(IP_VS_BASE_CTL+15)
+#define IP_VS_SO_SET_MAX	IP_VS_SO_SET_ZERO
+
+#define IP_VS_SO_GET_VERSION	IP_VS_BASE_CTL
+#define IP_VS_SO_GET_INFO	(IP_VS_BASE_CTL+1)
+#define IP_VS_SO_GET_SERVICES	(IP_VS_BASE_CTL+2)
+#define IP_VS_SO_GET_SERVICE	(IP_VS_BASE_CTL+3)
+#define IP_VS_SO_GET_DESTS	(IP_VS_BASE_CTL+4)
+#define IP_VS_SO_GET_DEST	(IP_VS_BASE_CTL+5)	/* not used now */
+#define IP_VS_SO_GET_TIMEOUT	(IP_VS_BASE_CTL+6)
+#define IP_VS_SO_GET_DAEMON	(IP_VS_BASE_CTL+7)
+#define IP_VS_SO_GET_MAX	IP_VS_SO_GET_DAEMON
+
+
+/*
+ *      IPVS Connection Flags
+ */
+#define IP_VS_CONN_F_FWD_MASK	0x0007		/* mask for the fwd methods */
+#define IP_VS_CONN_F_MASQ	0x0000		/* masquerading/NAT */
+#define IP_VS_CONN_F_LOCALNODE	0x0001		/* local node */
+#define IP_VS_CONN_F_TUNNEL	0x0002		/* tunneling */
+#define IP_VS_CONN_F_DROUTE	0x0003		/* direct routing */
+#define IP_VS_CONN_F_BYPASS	0x0004		/* cache bypass */
+#define IP_VS_CONN_F_SYNC	0x0020		/* entry created by sync */
+#define IP_VS_CONN_F_HASHED	0x0040		/* hashed entry */
+#define IP_VS_CONN_F_NOOUTPUT	0x0080		/* no output packets */
+#define IP_VS_CONN_F_INACTIVE	0x0100		/* not established */
+#define IP_VS_CONN_F_OUT_SEQ	0x0200		/* must do output seq adjust */
+#define IP_VS_CONN_F_IN_SEQ	0x0400		/* must do input seq adjust */
+#define IP_VS_CONN_F_SEQ_MASK	0x0600		/* in/out sequence mask */
+#define IP_VS_CONN_F_NO_CPORT	0x0800		/* no client port set yet */
+#define IP_VS_CONN_F_TEMPLATE	0x1000		/* template, not connection */
+
+#define IP_VS_SCHEDNAME_MAXLEN	16
+#define IP_VS_IFNAME_MAXLEN	16
+
+
+/*
+ *	The struct ip_vs_service_user and struct ip_vs_dest_user are
+ *	used to set IPVS rules through setsockopt.
+ */
+struct ip_vs_service_user {
+	/* virtual service addresses */
+	u_int16_t		protocol;
+	__be32			addr;		/* virtual ip address */
+	__be16			port;
+	u_int32_t		fwmark;		/* firwall mark of service */
+
+	/* virtual service options */
+	char			sched_name[IP_VS_SCHEDNAME_MAXLEN];
+	unsigned		flags;		/* virtual service flags */
+	unsigned		timeout;	/* persistent timeout in sec */
+	__be32			netmask;	/* persistent netmask */
+};
+
+
+struct ip_vs_dest_user {
+	/* destination server address */
+	__be32			addr;
+	__be16			port;
+
+	/* real server options */
+	unsigned		conn_flags;	/* connection flags */
+	int			weight;		/* destination weight */
+
+	/* thresholds for active connections */
+	u_int32_t		u_threshold;	/* upper threshold */
+	u_int32_t		l_threshold;	/* lower threshold */
+};
+
+
+/*
+ *	IPVS statistics object (for user space)
+ */
+struct ip_vs_stats_user
+{
+	__u32                   conns;          /* connections scheduled */
+	__u32                   inpkts;         /* incoming packets */
+	__u32                   outpkts;        /* outgoing packets */
+	__u64                   inbytes;        /* incoming bytes */
+	__u64                   outbytes;       /* outgoing bytes */
+
+	__u32			cps;		/* current connection rate */
+	__u32			inpps;		/* current in packet rate */
+	__u32			outpps;		/* current out packet rate */
+	__u32			inbps;		/* current in byte rate */
+	__u32			outbps;		/* current out byte rate */
+};
+
+
+/* The argument to IP_VS_SO_GET_INFO */
+struct ip_vs_getinfo {
+	/* version number */
+	unsigned int		version;
+
+	/* size of connection hash table */
+	unsigned int		size;
+
+	/* number of virtual services */
+	unsigned int		num_services;
+};
+
+
+/* The argument to IP_VS_SO_GET_SERVICE */
+struct ip_vs_service_entry {
+	/* which service: user fills in these */
+	u_int16_t		protocol;
+	__be32			addr;		/* virtual address */
+	__be16			port;
+	u_int32_t		fwmark;		/* firwall mark of service */
+
+	/* service options */
+	char			sched_name[IP_VS_SCHEDNAME_MAXLEN];
+	unsigned		flags;          /* virtual service flags */
+	unsigned		timeout;	/* persistent timeout */
+	__be32			netmask;	/* persistent netmask */
+
+	/* number of real servers */
+	unsigned int		num_dests;
+
+	/* statistics */
+	struct ip_vs_stats_user stats;
+};
+
+
+struct ip_vs_dest_entry {
+	__be32			addr;		/* destination address */
+	__be16			port;
+	unsigned		conn_flags;	/* connection flags */
+	int			weight;		/* destination weight */
+
+	u_int32_t		u_threshold;	/* upper threshold */
+	u_int32_t		l_threshold;	/* lower threshold */
+
+	u_int32_t		activeconns;	/* active connections */
+	u_int32_t		inactconns;	/* inactive connections */
+	u_int32_t		persistconns;	/* persistent connections */
+
+	/* statistics */
+	struct ip_vs_stats_user stats;
+};
+
+
+/* The argument to IP_VS_SO_GET_DESTS */
+struct ip_vs_get_dests {
+	/* which service: user fills in these */
+	u_int16_t		protocol;
+	__be32			addr;		/* virtual address */
+	__be16			port;
+	u_int32_t		fwmark;		/* firwall mark of service */
+
+	/* number of real servers */
+	unsigned int		num_dests;
+
+	/* the real servers */
+	struct ip_vs_dest_entry	entrytable[0];
+};
+
+
+/* The argument to IP_VS_SO_GET_SERVICES */
+struct ip_vs_get_services {
+	/* number of virtual services */
+	unsigned int		num_services;
+
+	/* service table */
+	struct ip_vs_service_entry entrytable[0];
+};
+
+
+/* The argument to IP_VS_SO_GET_TIMEOUT */
+struct ip_vs_timeout_user {
+	int			tcp_timeout;
+	int			tcp_fin_timeout;
+	int			udp_timeout;
+};
+
+
+/* The argument to IP_VS_SO_GET_DAEMON */
+struct ip_vs_daemon_user {
+	/* sync daemon state (master/backup) */
+	int			state;
+
+	/* multicast interface name */
+	char			mcast_ifn[IP_VS_IFNAME_MAXLEN];
+
+	/* SyncID we belong to */
+	int			syncid;
+};
+
+#endif	/* _IP_VS_H */
diff --git a/include/linux/ipc_namespace.h b/include/linux/ipc_namespace.h
index ea6c18a8b0d4..ea330f9e7100 100644
--- a/include/linux/ipc_namespace.h
+++ b/include/linux/ipc_namespace.h
@@ -36,6 +36,7 @@ struct ipc_namespace {
 	int		msg_ctlmni;
 	atomic_t	msg_bytes;
 	atomic_t	msg_hdrs;
+	int		auto_msgmni;
 
 	size_t		shm_ctlmax;
 	size_t		shm_ctlall;
@@ -53,7 +54,7 @@ extern atomic_t nr_ipc_ns;
 
 extern int register_ipcns_notifier(struct ipc_namespace *);
 extern int cond_register_ipcns_notifier(struct ipc_namespace *);
-extern int unregister_ipcns_notifier(struct ipc_namespace *);
+extern void unregister_ipcns_notifier(struct ipc_namespace *);
 extern int ipcns_notify(unsigned long);
 
 #else /* CONFIG_SYSVIPC */
diff --git a/include/linux/irq.h b/include/linux/irq.h
index 8ccb462ea42c..8d9411bc60f6 100644
--- a/include/linux/irq.h
+++ b/include/linux/irq.h
@@ -62,6 +62,7 @@ typedef	void (*irq_flow_handler_t)(unsigned int irq,
 #define IRQ_MOVE_PENDING	0x00200000	/* need to re-target IRQ destination */
 #define IRQ_NO_BALANCING	0x00400000	/* IRQ is excluded from balancing */
 #define IRQ_SPURIOUS_DISABLED	0x00800000	/* IRQ was disabled by the spurious trap */
+#define IRQ_MOVE_PCNTXT	0x01000000	/* IRQ migration from process context */
 
 #ifdef CONFIG_IRQ_PER_CPU
 # define CHECK_IRQ_PER_CPU(var) ((var) & IRQ_PER_CPU)
diff --git a/include/linux/irqflags.h b/include/linux/irqflags.h
index 2b1c2e58566e..74bde13224c9 100644
--- a/include/linux/irqflags.h
+++ b/include/linux/irqflags.h
@@ -11,6 +11,8 @@
 #ifndef _LINUX_TRACE_IRQFLAGS_H
 #define _LINUX_TRACE_IRQFLAGS_H
 
+#include <linux/typecheck.h>
+
 #ifdef CONFIG_TRACE_IRQFLAGS
   extern void trace_softirqs_on(unsigned long ip);
   extern void trace_softirqs_off(unsigned long ip);
@@ -58,18 +60,24 @@
 	do { trace_hardirqs_on(); raw_local_irq_enable(); } while (0)
 #define local_irq_disable() \
 	do { raw_local_irq_disable(); trace_hardirqs_off(); } while (0)
-#define local_irq_save(flags) \
-	do { raw_local_irq_save(flags); trace_hardirqs_off(); } while (0)
+#define local_irq_save(flags)				\
+	do {						\
+		typecheck(unsigned long, flags);	\
+		raw_local_irq_save(flags);		\
+		trace_hardirqs_off();			\
+	} while (0)
 
-#define local_irq_restore(flags)				\
-	do {							\
-		if (raw_irqs_disabled_flags(flags)) {		\
-			raw_local_irq_restore(flags);		\
-			trace_hardirqs_off();			\
-		} else {					\
-			trace_hardirqs_on();			\
-			raw_local_irq_restore(flags);		\
-		}						\
+
+#define local_irq_restore(flags)			\
+	do {						\
+		typecheck(unsigned long, flags);	\
+		if (raw_irqs_disabled_flags(flags)) {	\
+			raw_local_irq_restore(flags);	\
+			trace_hardirqs_off();		\
+		} else {				\
+			trace_hardirqs_on();		\
+			raw_local_irq_restore(flags);	\
+		}					\
 	} while (0)
 #else /* !CONFIG_TRACE_IRQFLAGS_SUPPORT */
 /*
@@ -78,8 +86,16 @@
  */
 # define raw_local_irq_disable()	local_irq_disable()
 # define raw_local_irq_enable()		local_irq_enable()
-# define raw_local_irq_save(flags)	local_irq_save(flags)
-# define raw_local_irq_restore(flags)	local_irq_restore(flags)
+# define raw_local_irq_save(flags)			\
+	do {						\
+		typecheck(unsigned long, flags);	\
+		local_irq_save(flags);			\
+	} while (0)
+# define raw_local_irq_restore(flags)			\
+	do {						\
+		typecheck(unsigned long, flags);	\
+		local_irq_restore(flags);		\
+	} while (0)
 #endif /* CONFIG_TRACE_IRQFLAGS_SUPPORT */
 
 #ifdef CONFIG_TRACE_IRQFLAGS_SUPPORT
@@ -89,7 +105,11 @@
 		raw_safe_halt();				\
 	} while (0)
 
-#define local_save_flags(flags)		raw_local_save_flags(flags)
+#define local_save_flags(flags)				\
+	do {						\
+		typecheck(unsigned long, flags);	\
+		raw_local_save_flags(flags);		\
+	} while (0)
 
 #define irqs_disabled()						\
 ({								\
@@ -99,7 +119,11 @@
 	raw_irqs_disabled_flags(_flags);			\
 })
 
-#define irqs_disabled_flags(flags)	raw_irqs_disabled_flags(flags)
+#define irqs_disabled_flags(flags)		\
+({						\
+	typecheck(unsigned long, flags);	\
+	raw_irqs_disabled_flags(flags);		\
+})
 #endif		/* CONFIG_X86 */
 
 #endif
diff --git a/include/linux/ivtv.h b/include/linux/ivtv.h
index 794b8daa9378..17ca64b5a66c 100644
--- a/include/linux/ivtv.h
+++ b/include/linux/ivtv.h
@@ -21,11 +21,7 @@
 #ifndef __LINUX_IVTV_H__
 #define __LINUX_IVTV_H__
 
-#ifdef __KERNEL__
-#include <linux/compiler.h> /* need __user */
-#else
-#define __user
-#endif
+#include <linux/compiler.h>
 #include <linux/types.h>
 
 /* ivtv knows several distinct output modes: MPEG streaming,
diff --git a/include/linux/ivtvfb.h b/include/linux/ivtvfb.h
index e980ba62ddcc..e20af47b59ad 100644
--- a/include/linux/ivtvfb.h
+++ b/include/linux/ivtvfb.h
@@ -21,11 +21,7 @@
 #ifndef __LINUX_IVTVFB_H__
 #define __LINUX_IVTVFB_H__
 
-#ifdef __KERNEL__
-#include <linux/compiler.h> /* need __user */
-#else
-#define __user
-#endif
+#include <linux/compiler.h>
 #include <linux/types.h>
 
 /* Framebuffer external API */
diff --git a/include/linux/jffs2.h b/include/linux/jffs2.h
index 6b563cae23df..da720bc3eb15 100644
--- a/include/linux/jffs2.h
+++ b/include/linux/jffs2.h
@@ -7,9 +7,6 @@
  *
  * For licensing information, see the file 'LICENCE' in the
  * jffs2 directory.
- *
- * $Id: jffs2.h,v 1.38 2005/09/26 11:37:23 havasi Exp $
- *
  */
 
 #ifndef __LINUX_JFFS2_H__
diff --git a/include/linux/kallsyms.h b/include/linux/kallsyms.h
index 00c1801099fa..b96144887444 100644
--- a/include/linux/kallsyms.h
+++ b/include/linux/kallsyms.h
@@ -6,6 +6,7 @@
 #define _LINUX_KALLSYMS_H
 
 #include <linux/errno.h>
+#include <linux/kernel.h>
 #include <linux/stddef.h>
 
 #define KSYM_NAME_LEN 128
@@ -105,18 +106,9 @@ static inline void print_fn_descriptor_symbol(const char *fmt, void *addr)
 	print_symbol(fmt, (unsigned long)addr);
 }
 
-#ifndef CONFIG_64BIT
-#define print_ip_sym(ip)		\
-do {					\
-	printk("[<%08lx>]", ip);	\
-	print_symbol(" %s\n", ip);	\
-} while(0)
-#else
-#define print_ip_sym(ip)		\
-do {					\
-	printk("[<%016lx>]", ip);	\
-	print_symbol(" %s\n", ip);	\
-} while(0)
-#endif
+static inline void print_ip_sym(unsigned long ip)
+{
+	printk("[<%p>] %pS\n", (void *) ip, (void *) ip);
+}
 
 #endif /*_LINUX_KALLSYMS_H*/
diff --git a/include/linux/kernel.h b/include/linux/kernel.h
index f9cd7a513f9c..2651f805ba6d 100644
--- a/include/linux/kernel.h
+++ b/include/linux/kernel.h
@@ -14,6 +14,8 @@
 #include <linux/compiler.h>
 #include <linux/bitops.h>
 #include <linux/log2.h>
+#include <linux/typecheck.h>
+#include <linux/ratelimit.h>
 #include <asm/byteorder.h>
 #include <asm/bug.h>
 
@@ -73,6 +75,12 @@ extern const char linux_proc_banner[];
  */
 #define upper_32_bits(n) ((u32)(((n) >> 16) >> 16))
 
+/**
+ * lower_32_bits - return bits 0-31 of a number
+ * @n: the number we're accessing
+ */
+#define lower_32_bits(n) ((u32)(n))
+
 #define	KERN_EMERG	"<0>"	/* system is unusable			*/
 #define	KERN_ALERT	"<1>"	/* action must be taken immediately	*/
 #define	KERN_CRIT	"<2>"	/* critical conditions			*/
@@ -100,6 +108,13 @@ struct completion;
 struct pt_regs;
 struct user;
 
+#ifdef CONFIG_PREEMPT_VOLUNTARY
+extern int _cond_resched(void);
+# define might_resched() _cond_resched()
+#else
+# define might_resched() do { } while (0)
+#endif
+
 /**
  * might_sleep - annotation for functions that can sleep
  *
@@ -110,13 +125,6 @@ struct user;
  * be bitten later when the calling function happens to sleep when it is not
  * supposed to.
  */
-#ifdef CONFIG_PREEMPT_VOLUNTARY
-extern int _cond_resched(void);
-# define might_resched() _cond_resched()
-#else
-# define might_resched() do { } while (0)
-#endif
-
 #ifdef CONFIG_DEBUG_SPINLOCK_SLEEP
   void __might_sleep(char *file, int line);
 # define might_sleep() \
@@ -188,11 +196,8 @@ asmlinkage int vprintk(const char *fmt, va_list args)
 asmlinkage int printk(const char * fmt, ...)
 	__attribute__ ((format (printf, 1, 2))) __cold;
 
-extern int printk_ratelimit_jiffies;
-extern int printk_ratelimit_burst;
+extern struct ratelimit_state printk_ratelimit_state;
 extern int printk_ratelimit(void);
-extern int __ratelimit(int ratelimit_jiffies, int ratelimit_burst);
-extern int __printk_ratelimit(int ratelimit_jiffies, int ratelimit_burst);
 extern bool printk_timed_ratelimit(unsigned long *caller_jiffies,
 				   unsigned int interval_msec);
 #else
@@ -203,8 +208,6 @@ static inline int printk(const char *s, ...)
 	__attribute__ ((format (printf, 1, 2)));
 static inline int __cold printk(const char *s, ...) { return 0; }
 static inline int printk_ratelimit(void) { return 0; }
-static inline int __printk_ratelimit(int ratelimit_jiffies, \
-				     int ratelimit_burst) { return 0; }
 static inline bool printk_timed_ratelimit(unsigned long *caller_jiffies, \
 					  unsigned int interval_msec)	\
 		{ return false; }
@@ -441,26 +444,6 @@ static inline char *pack_hex_byte(char *buf, u8 byte)
 	const typeof( ((type *)0)->member ) *__mptr = (ptr);	\
 	(type *)( (char *)__mptr - offsetof(type,member) );})
 
-/*
- * Check at compile time that something is of a particular type.
- * Always evaluates to 1 so you may use it easily in comparisons.
- */
-#define typecheck(type,x) \
-({	type __dummy; \
-	typeof(x) __dummy2; \
-	(void)(&__dummy == &__dummy2); \
-	1; \
-})
-
-/*
- * Check at compile time that 'function' is a certain type, or is a pointer
- * to that type (needs to use typedef for the function type.)
- */
-#define typecheck_fn(type,function) \
-({	typeof(type) __tmp = function; \
-	(void)__tmp; \
-})
-
 struct sysinfo;
 extern int do_sysinfo(struct sysinfo *info);
 
diff --git a/include/linux/kexec.h b/include/linux/kexec.h
index 3265968cd2cd..17f76fc05173 100644
--- a/include/linux/kexec.h
+++ b/include/linux/kexec.h
@@ -25,8 +25,8 @@
 #error KEXEC_CONTROL_MEMORY_LIMIT not defined
 #endif
 
-#ifndef KEXEC_CONTROL_CODE_SIZE
-#error KEXEC_CONTROL_CODE_SIZE not defined
+#ifndef KEXEC_CONTROL_PAGE_SIZE
+#error KEXEC_CONTROL_PAGE_SIZE not defined
 #endif
 
 #ifndef KEXEC_ARCH
@@ -83,6 +83,7 @@ struct kimage {
 
 	unsigned long start;
 	struct page *control_code_page;
+	struct page *swap_page;
 
 	unsigned long nr_segments;
 	struct kexec_segment segment[KEXEC_SEGMENT_MAX];
@@ -98,18 +99,20 @@ struct kimage {
 	unsigned int type : 1;
 #define KEXEC_TYPE_DEFAULT 0
 #define KEXEC_TYPE_CRASH   1
+	unsigned int preserve_context : 1;
 };
 
 
 
 /* kexec interface functions */
-extern NORET_TYPE void machine_kexec(struct kimage *image) ATTRIB_NORET;
+extern void machine_kexec(struct kimage *image);
 extern int machine_kexec_prepare(struct kimage *image);
 extern void machine_kexec_cleanup(struct kimage *image);
 extern asmlinkage long sys_kexec_load(unsigned long entry,
 					unsigned long nr_segments,
 					struct kexec_segment __user *segments,
 					unsigned long flags);
+extern int kernel_kexec(void);
 #ifdef CONFIG_COMPAT
 extern asmlinkage long compat_sys_kexec_load(unsigned long entry,
 				unsigned long nr_segments,
@@ -127,8 +130,8 @@ void vmcoreinfo_append_str(const char *fmt, ...)
 	__attribute__ ((format (printf, 1, 2)));
 unsigned long paddr_vmcoreinfo_note(void);
 
-#define VMCOREINFO_OSRELEASE(name) \
-	vmcoreinfo_append_str("OSRELEASE=%s\n", #name)
+#define VMCOREINFO_OSRELEASE(value) \
+	vmcoreinfo_append_str("OSRELEASE=%s\n", value)
 #define VMCOREINFO_PAGESIZE(value) \
 	vmcoreinfo_append_str("PAGESIZE=%ld\n", value)
 #define VMCOREINFO_SYMBOL(name) \
@@ -156,8 +159,9 @@ extern struct kimage *kexec_crash_image;
 #define kexec_flush_icache_page(page)
 #endif
 
-#define KEXEC_ON_CRASH  0x00000001
-#define KEXEC_ARCH_MASK 0xffff0000
+#define KEXEC_ON_CRASH		0x00000001
+#define KEXEC_PRESERVE_CONTEXT	0x00000002
+#define KEXEC_ARCH_MASK		0xffff0000
 
 /* These values match the ELF architecture values.
  * Unless there is a good reason that should continue to be the case.
@@ -174,7 +178,12 @@ extern struct kimage *kexec_crash_image;
 #define KEXEC_ARCH_MIPS_LE (10 << 16)
 #define KEXEC_ARCH_MIPS    ( 8 << 16)
 
-#define KEXEC_FLAGS    (KEXEC_ON_CRASH)  /* List of defined/legal kexec flags */
+/* List of defined/legal kexec flags */
+#ifndef CONFIG_KEXEC_JUMP
+#define KEXEC_FLAGS    KEXEC_ON_CRASH
+#else
+#define KEXEC_FLAGS    (KEXEC_ON_CRASH | KEXEC_PRESERVE_CONTEXT)
+#endif
 
 #define VMCOREINFO_BYTES           (4096)
 #define VMCOREINFO_NOTE_NAME       "VMCOREINFO"
diff --git a/include/linux/kmod.h b/include/linux/kmod.h
index 0509c4ce4857..a1a91577813c 100644
--- a/include/linux/kmod.h
+++ b/include/linux/kmod.h
@@ -19,6 +19,7 @@
  *      Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  */
 
+#include <linux/gfp.h>
 #include <linux/stddef.h>
 #include <linux/errno.h>
 #include <linux/compiler.h>
@@ -41,8 +42,8 @@ struct file;
 struct subprocess_info;
 
 /* Allocate a subprocess_info structure */
-struct subprocess_info *call_usermodehelper_setup(char *path,
-						  char **argv, char **envp);
+struct subprocess_info *call_usermodehelper_setup(char *path, char **argv,
+						  char **envp, gfp_t gfp_mask);
 
 /* Set various pieces of state into the subprocess_info structure */
 void call_usermodehelper_setkeys(struct subprocess_info *info,
@@ -69,8 +70,9 @@ static inline int
 call_usermodehelper(char *path, char **argv, char **envp, enum umh_wait wait)
 {
 	struct subprocess_info *info;
+	gfp_t gfp_mask = (wait == UMH_NO_WAIT) ? GFP_ATOMIC : GFP_KERNEL;
 
-	info = call_usermodehelper_setup(path, argv, envp);
+	info = call_usermodehelper_setup(path, argv, envp, gfp_mask);
 	if (info == NULL)
 		return -ENOMEM;
 	return call_usermodehelper_exec(info, wait);
@@ -81,8 +83,9 @@ call_usermodehelper_keys(char *path, char **argv, char **envp,
 			 struct key *session_keyring, enum umh_wait wait)
 {
 	struct subprocess_info *info;
+	gfp_t gfp_mask = (wait == UMH_NO_WAIT) ? GFP_ATOMIC : GFP_KERNEL;
 
-	info = call_usermodehelper_setup(path, argv, envp);
+	info = call_usermodehelper_setup(path, argv, envp, gfp_mask);
 	if (info == NULL)
 		return -ENOMEM;
 
diff --git a/include/linux/kprobes.h b/include/linux/kprobes.h
index 04a3556bdea6..0be7795655fa 100644
--- a/include/linux/kprobes.h
+++ b/include/linux/kprobes.h
@@ -157,11 +157,10 @@ struct kretprobe {
 	int nmissed;
 	size_t data_size;
 	struct hlist_head free_instances;
-	struct hlist_head used_instances;
+	spinlock_t lock;
 };
 
 struct kretprobe_instance {
-	struct hlist_node uflist; /* either on free list or used list */
 	struct hlist_node hlist;
 	struct kretprobe *rp;
 	kprobe_opcode_t *ret_addr;
@@ -201,7 +200,6 @@ static inline int init_test_probes(void)
 }
 #endif /* CONFIG_KPROBES_SANITY_TEST */
 
-extern spinlock_t kretprobe_lock;
 extern struct mutex kprobe_mutex;
 extern int arch_prepare_kprobe(struct kprobe *p);
 extern void arch_arm_kprobe(struct kprobe *p);
@@ -214,6 +212,9 @@ extern void kprobes_inc_nmissed_count(struct kprobe *p);
 
 /* Get the kprobe at this addr (if any) - called with preemption disabled */
 struct kprobe *get_kprobe(void *addr);
+void kretprobe_hash_lock(struct task_struct *tsk,
+			 struct hlist_head **head, unsigned long *flags);
+void kretprobe_hash_unlock(struct task_struct *tsk, unsigned long *flags);
 struct hlist_head * kretprobe_inst_table_head(struct task_struct *tsk);
 
 /* kprobe_running() will just return the current_kprobe on this CPU */
diff --git a/include/linux/kthread.h b/include/linux/kthread.h
index 00dd957e245b..aabc8a13ba71 100644
--- a/include/linux/kthread.h
+++ b/include/linux/kthread.h
@@ -6,7 +6,8 @@
 
 struct task_struct *kthread_create(int (*threadfn)(void *data),
 				   void *data,
-				   const char namefmt[], ...);
+				   const char namefmt[], ...)
+	__attribute__((format(printf, 3, 4)));
 
 /**
  * kthread_run - create and wake a thread.
diff --git a/include/linux/kvm.h b/include/linux/kvm.h
index 0ea064cbfbc8..70a30651cd12 100644
--- a/include/linux/kvm.h
+++ b/include/linux/kvm.h
@@ -320,12 +320,12 @@ struct kvm_trace_rec {
 		struct {
 			__u64 cycle_u64;
 			__u32 extra_u32[KVM_TRC_EXTRA_MAX];
-		} cycle;
+		} __attribute__((packed)) cycle;
 		struct {
 			__u32 extra_u32[KVM_TRC_EXTRA_MAX];
 		} nocycle;
 	} u;
-} __attribute__((packed));
+};
 
 #define KVMIO 0xAE
 
@@ -371,6 +371,7 @@ struct kvm_trace_rec {
 #define KVM_CAP_PV_MMU 13
 #define KVM_CAP_MP_STATE 14
 #define KVM_CAP_COALESCED_MMIO 15
+#define KVM_CAP_SYNC_MMU 16  /* Changes to host mmap are reflected in guest */
 
 /*
  * ioctls for VM fds
diff --git a/include/linux/kvm_host.h b/include/linux/kvm_host.h
index 07d68a8ae8e9..8525afc53107 100644
--- a/include/linux/kvm_host.h
+++ b/include/linux/kvm_host.h
@@ -121,6 +121,12 @@ struct kvm {
 	struct kvm_coalesced_mmio_dev *coalesced_mmio_dev;
 	struct kvm_coalesced_mmio_ring *coalesced_mmio_ring;
 #endif
+
+#ifdef KVM_ARCH_WANT_MMU_NOTIFIER
+	struct mmu_notifier mmu_notifier;
+	unsigned long mmu_notifier_seq;
+	long mmu_notifier_count;
+#endif
 };
 
 /* The guest did something we don't support. */
@@ -332,4 +338,22 @@ int kvm_trace_ioctl(unsigned int ioctl, unsigned long arg)
 #define kvm_trace_cleanup() ((void)0)
 #endif
 
+#ifdef KVM_ARCH_WANT_MMU_NOTIFIER
+static inline int mmu_notifier_retry(struct kvm_vcpu *vcpu, unsigned long mmu_seq)
+{
+	if (unlikely(vcpu->kvm->mmu_notifier_count))
+		return 1;
+	/*
+	 * Both reads happen under the mmu_lock and both values are
+	 * modified under mmu_lock, so there's no need of smb_rmb()
+	 * here in between, otherwise mmu_notifier_count should be
+	 * read before mmu_notifier_seq, see
+	 * mmu_notifier_invalidate_range_end write side.
+	 */
+	if (vcpu->kvm->mmu_notifier_seq != mmu_seq)
+		return 1;
+	return 0;
+}
+#endif
+
 #endif
diff --git a/include/linux/libata.h b/include/linux/libata.h
index 5b247b8a6b3b..225bfc5bd9ec 100644
--- a/include/linux/libata.h
+++ b/include/linux/libata.h
@@ -60,9 +60,9 @@
 
 /* note: prints function name for you */
 #ifdef ATA_DEBUG
-#define DPRINTK(fmt, args...) printk(KERN_ERR "%s: " fmt, __FUNCTION__, ## args)
+#define DPRINTK(fmt, args...) printk(KERN_ERR "%s: " fmt, __func__, ## args)
 #ifdef ATA_VERBOSE_DEBUG
-#define VPRINTK(fmt, args...) printk(KERN_ERR "%s: " fmt, __FUNCTION__, ## args)
+#define VPRINTK(fmt, args...) printk(KERN_ERR "%s: " fmt, __func__, ## args)
 #else
 #define VPRINTK(fmt, args...)
 #endif	/* ATA_VERBOSE_DEBUG */
@@ -71,7 +71,7 @@
 #define VPRINTK(fmt, args...)
 #endif	/* ATA_DEBUG */
 
-#define BPRINTK(fmt, args...) if (ap->flags & ATA_FLAG_DEBUGMSG) printk(KERN_ERR "%s: " fmt, __FUNCTION__, ## args)
+#define BPRINTK(fmt, args...) if (ap->flags & ATA_FLAG_DEBUGMSG) printk(KERN_ERR "%s: " fmt, __func__, ## args)
 
 /* NEW: debug levels */
 #define HAVE_LIBATA_MSG 1
@@ -163,6 +163,7 @@ enum {
 	ATA_DEV_NONE		= 9,	/* no device */
 
 	/* struct ata_link flags */
+	ATA_LFLAG_NO_HRST	= (1 << 1), /* avoid hardreset */
 	ATA_LFLAG_NO_SRST	= (1 << 2), /* avoid softreset */
 	ATA_LFLAG_ASSUME_ATA	= (1 << 3), /* assume ATA class */
 	ATA_LFLAG_ASSUME_SEMB	= (1 << 4), /* assume SEMB class */
@@ -646,6 +647,7 @@ struct ata_link {
 
 	unsigned int		flags;		/* ATA_LFLAG_xxx */
 
+	u32			saved_scontrol;	/* SControl on probe */
 	unsigned int		hw_sata_spd_limit;
 	unsigned int		sata_spd_limit;
 	unsigned int		sata_spd;	/* current SATA PHY speed */
@@ -750,6 +752,7 @@ struct ata_port_operations {
 	void (*set_piomode)(struct ata_port *ap, struct ata_device *dev);
 	void (*set_dmamode)(struct ata_port *ap, struct ata_device *dev);
 	int  (*set_mode)(struct ata_link *link, struct ata_device **r_failed_dev);
+	unsigned int (*read_id)(struct ata_device *dev, struct ata_taskfile *tf, u16 *id);
 
 	void (*dev_config)(struct ata_device *dev);
 
@@ -951,6 +954,8 @@ extern void ata_id_string(const u16 *id, unsigned char *s,
 			  unsigned int ofs, unsigned int len);
 extern void ata_id_c_string(const u16 *id, unsigned char *s,
 			    unsigned int ofs, unsigned int len);
+extern unsigned int ata_do_dev_read_id(struct ata_device *dev,
+					struct ata_taskfile *tf, u16 *id);
 extern void ata_qc_complete(struct ata_queued_cmd *qc);
 extern int ata_qc_complete_multiple(struct ata_port *ap, u32 qc_active);
 extern void ata_scsi_simulate(struct ata_device *dev, struct scsi_cmnd *cmd,
@@ -1424,6 +1429,28 @@ static inline unsigned long ata_deadline(unsigned long from_jiffies,
 	return from_jiffies + msecs_to_jiffies(timeout_msecs);
 }
 
+/* Don't open code these in drivers as there are traps. Firstly the range may
+   change in future hardware and specs, secondly 0xFF means 'no DMA' but is
+   > UDMA_0. Dyma ddreigiau */
+
+static inline int ata_using_mwdma(struct ata_device *adev)
+{
+	if (adev->dma_mode >= XFER_MW_DMA_0 && adev->dma_mode <= XFER_MW_DMA_4)
+		return 1;
+	return 0;
+}
+
+static inline int ata_using_udma(struct ata_device *adev)
+{
+	if (adev->dma_mode >= XFER_UDMA_0 && adev->dma_mode <= XFER_UDMA_7)
+		return 1;
+	return 0;
+}
+
+static inline int ata_dma_enabled(struct ata_device *adev)
+{
+	return (adev->dma_mode == 0xFF ? 0 : 1);
+}
 
 /**************************************************************************
  * PMP - drivers/ata/libata-pmp.c
diff --git a/include/linux/list.h b/include/linux/list.h
index 139ec41d9c2e..db35ef02e745 100644
--- a/include/linux/list.h
+++ b/include/linux/list.h
@@ -61,14 +61,10 @@ extern void __list_add(struct list_head *new,
  * Insert a new entry after the specified head.
  * This is good for implementing stacks.
  */
-#ifndef CONFIG_DEBUG_LIST
 static inline void list_add(struct list_head *new, struct list_head *head)
 {
 	__list_add(new, head, head->next);
 }
-#else
-extern void list_add(struct list_head *new, struct list_head *head);
-#endif
 
 
 /**
@@ -218,22 +214,62 @@ static inline int list_is_singular(const struct list_head *head)
 	return !list_empty(head) && (head->next == head->prev);
 }
 
+static inline void __list_cut_position(struct list_head *list,
+		struct list_head *head, struct list_head *entry)
+{
+	struct list_head *new_first = entry->next;
+	list->next = head->next;
+	list->next->prev = list;
+	list->prev = entry;
+	entry->next = list;
+	head->next = new_first;
+	new_first->prev = head;
+}
+
+/**
+ * list_cut_position - cut a list into two
+ * @list: a new list to add all removed entries
+ * @head: a list with entries
+ * @entry: an entry within head, could be the head itself
+ *	and if so we won't cut the list
+ *
+ * This helper moves the initial part of @head, up to and
+ * including @entry, from @head to @list. You should
+ * pass on @entry an element you know is on @head. @list
+ * should be an empty list or a list you do not care about
+ * losing its data.
+ *
+ */
+static inline void list_cut_position(struct list_head *list,
+		struct list_head *head, struct list_head *entry)
+{
+	if (list_empty(head))
+		return;
+	if (list_is_singular(head) &&
+		(head->next != entry && head != entry))
+		return;
+	if (entry == head)
+		INIT_LIST_HEAD(list);
+	else
+		__list_cut_position(list, head, entry);
+}
+
 static inline void __list_splice(const struct list_head *list,
-				 struct list_head *head)
+				 struct list_head *prev,
+				 struct list_head *next)
 {
 	struct list_head *first = list->next;
 	struct list_head *last = list->prev;
-	struct list_head *at = head->next;
 
-	first->prev = head;
-	head->next = first;
+	first->prev = prev;
+	prev->next = first;
 
-	last->next = at;
-	at->prev = last;
+	last->next = next;
+	next->prev = last;
 }
 
 /**
- * list_splice - join two lists
+ * list_splice - join two lists, this is designed for stacks
  * @list: the new list to add.
  * @head: the place to add it in the first list.
  */
@@ -241,7 +277,19 @@ static inline void list_splice(const struct list_head *list,
 				struct list_head *head)
 {
 	if (!list_empty(list))
-		__list_splice(list, head);
+		__list_splice(list, head, head->next);
+}
+
+/**
+ * list_splice_tail - join two lists, each list being a queue
+ * @list: the new list to add.
+ * @head: the place to add it in the first list.
+ */
+static inline void list_splice_tail(struct list_head *list,
+				struct list_head *head)
+{
+	if (!list_empty(list))
+		__list_splice(list, head->prev, head);
 }
 
 /**
@@ -255,7 +303,24 @@ static inline void list_splice_init(struct list_head *list,
 				    struct list_head *head)
 {
 	if (!list_empty(list)) {
-		__list_splice(list, head);
+		__list_splice(list, head, head->next);
+		INIT_LIST_HEAD(list);
+	}
+}
+
+/**
+ * list_splice_tail_init - join two lists and reinitialise the emptied list
+ * @list: the new list to add.
+ * @head: the place to add it in the first list.
+ *
+ * Each of the lists is a queue.
+ * The list at @list is reinitialised
+ */
+static inline void list_splice_tail_init(struct list_head *list,
+					 struct list_head *head)
+{
+	if (!list_empty(list)) {
+		__list_splice(list, head->prev, head);
 		INIT_LIST_HEAD(list);
 	}
 }
diff --git a/include/linux/lockdep.h b/include/linux/lockdep.h
index 2486eb4edbf1..331e5f1c2d8e 100644
--- a/include/linux/lockdep.h
+++ b/include/linux/lockdep.h
@@ -89,6 +89,7 @@ struct lock_class {
 
 	struct lockdep_subclass_key	*key;
 	unsigned int			subclass;
+	unsigned int			dep_gen_id;
 
 	/*
 	 * IRQ/softirq usage tracking bits:
@@ -189,6 +190,14 @@ struct lock_chain {
 	u64				chain_key;
 };
 
+#define MAX_LOCKDEP_KEYS_BITS		13
+/*
+ * Subtract one because we offset hlock->class_idx by 1 in order
+ * to make 0 mean no class. This avoids overflowing the class_idx
+ * bitfield and hitting the BUG in hlock_class().
+ */
+#define MAX_LOCKDEP_KEYS		((1UL << MAX_LOCKDEP_KEYS_BITS) - 1)
+
 struct held_lock {
 	/*
 	 * One-way hash of the dependency chain up to this point. We
@@ -205,14 +214,14 @@ struct held_lock {
 	 * with zero), here we store the previous hash value:
 	 */
 	u64				prev_chain_key;
-	struct lock_class		*class;
 	unsigned long			acquire_ip;
 	struct lockdep_map		*instance;
-
+	struct lockdep_map		*nest_lock;
 #ifdef CONFIG_LOCK_STAT
 	u64 				waittime_stamp;
 	u64				holdtime_stamp;
 #endif
+	unsigned int			class_idx:MAX_LOCKDEP_KEYS_BITS;
 	/*
 	 * The lock-stack is unified in that the lock chains of interrupt
 	 * contexts nest ontop of process context chains, but we 'separate'
@@ -226,11 +235,11 @@ struct held_lock {
 	 * The following field is used to detect when we cross into an
 	 * interrupt context:
 	 */
-	int				irq_context;
-	int				trylock;
-	int				read;
-	int				check;
-	int				hardirqs_off;
+	unsigned int irq_context:2; /* bit 0 - soft, bit 1 - hard */
+	unsigned int trylock:1;
+	unsigned int read:2;        /* see lock_acquire() comment */
+	unsigned int check:2;       /* see lock_acquire() comment */
+	unsigned int hardirqs_off:1;
 };
 
 /*
@@ -294,11 +303,15 @@ extern void lockdep_init_map(struct lockdep_map *lock, const char *name,
  *   2: full validation
  */
 extern void lock_acquire(struct lockdep_map *lock, unsigned int subclass,
-			 int trylock, int read, int check, unsigned long ip);
+			 int trylock, int read, int check,
+			 struct lockdep_map *nest_lock, unsigned long ip);
 
 extern void lock_release(struct lockdep_map *lock, int nested,
 			 unsigned long ip);
 
+extern void lock_set_subclass(struct lockdep_map *lock, unsigned int subclass,
+			      unsigned long ip);
+
 # define INIT_LOCKDEP				.lockdep_recursion = 0,
 
 #define lockdep_depth(tsk)	(debug_locks ? (tsk)->lockdep_depth : 0)
@@ -313,8 +326,9 @@ static inline void lockdep_on(void)
 {
 }
 
-# define lock_acquire(l, s, t, r, c, i)		do { } while (0)
+# define lock_acquire(l, s, t, r, c, n, i)	do { } while (0)
 # define lock_release(l, n, i)			do { } while (0)
+# define lock_set_subclass(l, s, i)		do { } while (0)
 # define lockdep_init()				do { } while (0)
 # define lockdep_info()				do { } while (0)
 # define lockdep_init_map(lock, name, key, sub)	do { (void)(key); } while (0)
@@ -400,9 +414,11 @@ static inline void print_irqtrace_events(struct task_struct *curr)
 
 #ifdef CONFIG_DEBUG_LOCK_ALLOC
 # ifdef CONFIG_PROVE_LOCKING
-#  define spin_acquire(l, s, t, i)		lock_acquire(l, s, t, 0, 2, i)
+#  define spin_acquire(l, s, t, i)		lock_acquire(l, s, t, 0, 2, NULL, i)
+#  define spin_acquire_nest(l, s, t, n, i)	lock_acquire(l, s, t, 0, 2, n, i)
 # else
-#  define spin_acquire(l, s, t, i)		lock_acquire(l, s, t, 0, 1, i)
+#  define spin_acquire(l, s, t, i)		lock_acquire(l, s, t, 0, 1, NULL, i)
+#  define spin_acquire_nest(l, s, t, n, i)	lock_acquire(l, s, t, 0, 1, NULL, i)
 # endif
 # define spin_release(l, n, i)			lock_release(l, n, i)
 #else
@@ -412,11 +428,11 @@ static inline void print_irqtrace_events(struct task_struct *curr)
 
 #ifdef CONFIG_DEBUG_LOCK_ALLOC
 # ifdef CONFIG_PROVE_LOCKING
-#  define rwlock_acquire(l, s, t, i)		lock_acquire(l, s, t, 0, 2, i)
-#  define rwlock_acquire_read(l, s, t, i)	lock_acquire(l, s, t, 2, 2, i)
+#  define rwlock_acquire(l, s, t, i)		lock_acquire(l, s, t, 0, 2, NULL, i)
+#  define rwlock_acquire_read(l, s, t, i)	lock_acquire(l, s, t, 2, 2, NULL, i)
 # else
-#  define rwlock_acquire(l, s, t, i)		lock_acquire(l, s, t, 0, 1, i)
-#  define rwlock_acquire_read(l, s, t, i)	lock_acquire(l, s, t, 2, 1, i)
+#  define rwlock_acquire(l, s, t, i)		lock_acquire(l, s, t, 0, 1, NULL, i)
+#  define rwlock_acquire_read(l, s, t, i)	lock_acquire(l, s, t, 2, 1, NULL, i)
 # endif
 # define rwlock_release(l, n, i)		lock_release(l, n, i)
 #else
@@ -427,9 +443,9 @@ static inline void print_irqtrace_events(struct task_struct *curr)
 
 #ifdef CONFIG_DEBUG_LOCK_ALLOC
 # ifdef CONFIG_PROVE_LOCKING
-#  define mutex_acquire(l, s, t, i)		lock_acquire(l, s, t, 0, 2, i)
+#  define mutex_acquire(l, s, t, i)		lock_acquire(l, s, t, 0, 2, NULL, i)
 # else
-#  define mutex_acquire(l, s, t, i)		lock_acquire(l, s, t, 0, 1, i)
+#  define mutex_acquire(l, s, t, i)		lock_acquire(l, s, t, 0, 1, NULL, i)
 # endif
 # define mutex_release(l, n, i)			lock_release(l, n, i)
 #else
@@ -439,11 +455,11 @@ static inline void print_irqtrace_events(struct task_struct *curr)
 
 #ifdef CONFIG_DEBUG_LOCK_ALLOC
 # ifdef CONFIG_PROVE_LOCKING
-#  define rwsem_acquire(l, s, t, i)		lock_acquire(l, s, t, 0, 2, i)
-#  define rwsem_acquire_read(l, s, t, i)	lock_acquire(l, s, t, 1, 2, i)
+#  define rwsem_acquire(l, s, t, i)		lock_acquire(l, s, t, 0, 2, NULL, i)
+#  define rwsem_acquire_read(l, s, t, i)	lock_acquire(l, s, t, 1, 2, NULL, i)
 # else
-#  define rwsem_acquire(l, s, t, i)		lock_acquire(l, s, t, 0, 1, i)
-#  define rwsem_acquire_read(l, s, t, i)	lock_acquire(l, s, t, 1, 1, i)
+#  define rwsem_acquire(l, s, t, i)		lock_acquire(l, s, t, 0, 1, NULL, i)
+#  define rwsem_acquire_read(l, s, t, i)	lock_acquire(l, s, t, 1, 1, NULL, i)
 # endif
 # define rwsem_release(l, n, i)			lock_release(l, n, i)
 #else
@@ -452,4 +468,16 @@ static inline void print_irqtrace_events(struct task_struct *curr)
 # define rwsem_release(l, n, i)			do { } while (0)
 #endif
 
+#ifdef CONFIG_DEBUG_LOCK_ALLOC
+# ifdef CONFIG_PROVE_LOCKING
+#  define lock_map_acquire(l)		lock_acquire(l, 0, 0, 0, 2, NULL, _THIS_IP_)
+# else
+#  define lock_map_acquire(l)		lock_acquire(l, 0, 0, 0, 1, NULL, _THIS_IP_)
+# endif
+# define lock_map_release(l)			lock_release(l, 1, _THIS_IP_)
+#else
+# define lock_map_acquire(l)			do { } while (0)
+# define lock_map_release(l)			do { } while (0)
+#endif
+
 #endif /* __LINUX_LOCKDEP_H */
diff --git a/include/linux/mISDNdsp.h b/include/linux/mISDNdsp.h
new file mode 100644
index 000000000000..6b71d2dce508
--- /dev/null
+++ b/include/linux/mISDNdsp.h
@@ -0,0 +1,37 @@
+#ifndef __mISDNdsp_H__
+#define __mISDNdsp_H__
+
+struct mISDN_dsp_element_arg {
+	char	*name;
+	char	*def;
+	char	*desc;
+};
+
+struct mISDN_dsp_element {
+	char	*name;
+	void	*(*new)(const char *arg);
+	void	(*free)(void *p);
+	void	(*process_tx)(void *p, unsigned char *data, int len);
+	void	(*process_rx)(void *p, unsigned char *data, int len);
+	int	num_args;
+	struct mISDN_dsp_element_arg
+		*args;
+};
+
+extern int  mISDN_dsp_element_register(struct mISDN_dsp_element *elem);
+extern void mISDN_dsp_element_unregister(struct mISDN_dsp_element *elem);
+
+struct dsp_features {
+	int	hfc_id; /* unique id to identify the chip (or -1) */
+	int	hfc_dtmf; /* set if HFCmulti card supports dtmf */
+	int	hfc_loops; /* set if card supports tone loops */
+	int	hfc_echocanhw; /* set if card supports echocancelation*/
+	int	pcm_id; /* unique id to identify the pcm bus (or -1) */
+	int	pcm_slots; /* number of slots on the pcm bus */
+	int	pcm_banks; /* number of IO banks of pcm bus */
+	int	unclocked; /* data is not clocked (has jitter/loss) */
+	int	unordered; /* data is unordered (packets have index) */
+};
+
+#endif
+
diff --git a/include/linux/mISDNhw.h b/include/linux/mISDNhw.h
new file mode 100644
index 000000000000..e794dfb87504
--- /dev/null
+++ b/include/linux/mISDNhw.h
@@ -0,0 +1,193 @@
+/*
+ *
+ * Author	Karsten Keil <kkeil@novell.com>
+ *
+ *   Basic declarations for the mISDN HW channels
+ *
+ * Copyright 2008  by Karsten Keil <kkeil@novell.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#ifndef MISDNHW_H
+#define MISDNHW_H
+#include <linux/mISDNif.h>
+#include <linux/timer.h>
+
+/*
+ * HW DEBUG 0xHHHHGGGG
+ * H - hardware driver specific bits
+ * G - for all drivers
+ */
+
+#define DEBUG_HW		0x00000001
+#define DEBUG_HW_OPEN		0x00000002
+#define DEBUG_HW_DCHANNEL	0x00000100
+#define DEBUG_HW_DFIFO		0x00000200
+#define DEBUG_HW_BCHANNEL	0x00001000
+#define DEBUG_HW_BFIFO		0x00002000
+
+#define MAX_DFRAME_LEN_L1	300
+#define MAX_MON_FRAME		32
+#define MAX_LOG_SPACE		2048
+#define MISDN_COPY_SIZE		32
+
+/* channel->Flags bit field */
+#define FLG_TX_BUSY		0	/* tx_buf in use */
+#define FLG_TX_NEXT		1	/* next_skb in use */
+#define FLG_L1_BUSY		2	/* L1 is permanent busy */
+#define FLG_L2_ACTIVATED	3	/* activated from L2 */
+#define FLG_OPEN		5	/* channel is in use */
+#define FLG_ACTIVE		6	/* channel is activated */
+#define FLG_BUSY_TIMER		7
+/* channel type */
+#define FLG_DCHANNEL		8	/* channel is D-channel */
+#define FLG_BCHANNEL		9	/* channel is B-channel */
+#define FLG_ECHANNEL		10	/* channel is E-channel */
+#define FLG_TRANSPARENT		12	/* channel use transparent data */
+#define FLG_HDLC		13	/* channel use hdlc data */
+#define FLG_L2DATA		14	/* channel use L2 DATA primitivs */
+#define FLG_ORIGIN		15	/* channel is on origin site */
+/* channel specific stuff */
+/* arcofi specific */
+#define FLG_ARCOFI_TIMER	16
+#define FLG_ARCOFI_ERROR	17
+/* isar specific */
+#define FLG_INITIALIZED		16
+#define FLG_DLEETX		17
+#define FLG_LASTDLE		18
+#define FLG_FIRST		19
+#define FLG_LASTDATA		20
+#define FLG_NMD_DATA		21
+#define FLG_FTI_RUN		22
+#define FLG_LL_OK		23
+#define FLG_LL_CONN		24
+#define FLG_DTMFSEND		25
+
+/* workq events */
+#define FLG_RECVQUEUE		30
+#define	FLG_PHCHANGE		31
+
+#define schedule_event(s, ev)	do { \
+					test_and_set_bit(ev, &((s)->Flags)); \
+					schedule_work(&((s)->workq)); \
+				} while (0)
+
+struct dchannel {
+	struct mISDNdevice	dev;
+	u_long			Flags;
+	struct work_struct	workq;
+	void			(*phfunc) (struct dchannel *);
+	u_int			state;
+	void			*l1;
+	/* HW access */
+	u_char			(*read_reg) (void *, u_char);
+	void			(*write_reg) (void *, u_char, u_char);
+	void			(*read_fifo) (void *, u_char *, int);
+	void			(*write_fifo) (void *, u_char *, int);
+	void			*hw;
+	int			slot;	/* multiport card channel slot */
+	struct timer_list	timer;
+	/* receive data */
+	struct sk_buff		*rx_skb;
+	int			maxlen;
+	/* send data */
+	struct sk_buff_head	squeue;
+	struct sk_buff_head	rqueue;
+	struct sk_buff		*tx_skb;
+	int			tx_idx;
+	int			debug;
+	/* statistics */
+	int			err_crc;
+	int			err_tx;
+	int			err_rx;
+};
+
+typedef int	(dchannel_l1callback)(struct dchannel *, u_int);
+extern int	create_l1(struct dchannel *, dchannel_l1callback *);
+
+/* private L1 commands */
+#define INFO0		0x8002
+#define INFO1		0x8102
+#define INFO2		0x8202
+#define INFO3_P8	0x8302
+#define INFO3_P10	0x8402
+#define INFO4_P8	0x8502
+#define INFO4_P10	0x8602
+#define LOSTFRAMING	0x8702
+#define ANYSIGNAL	0x8802
+#define HW_POWERDOWN	0x8902
+#define HW_RESET_REQ	0x8a02
+#define HW_POWERUP_REQ	0x8b02
+#define HW_DEACT_REQ	0x8c02
+#define HW_ACTIVATE_REQ	0x8e02
+#define HW_D_NOBLOCKED  0x8f02
+#define HW_RESET_IND	0x9002
+#define HW_POWERUP_IND	0x9102
+#define HW_DEACT_IND	0x9202
+#define HW_ACTIVATE_IND	0x9302
+#define HW_DEACT_CNF	0x9402
+#define HW_TESTLOOP	0x9502
+#define HW_TESTRX_RAW	0x9602
+#define HW_TESTRX_HDLC	0x9702
+#define HW_TESTRX_OFF	0x9802
+
+struct layer1;
+extern int	l1_event(struct layer1 *, u_int);
+
+
+struct bchannel {
+	struct mISDNchannel	ch;
+	int			nr;
+	u_long			Flags;
+	struct work_struct	workq;
+	u_int			state;
+	/* HW access */
+	u_char			(*read_reg) (void *, u_char);
+	void			(*write_reg) (void *, u_char, u_char);
+	void			(*read_fifo) (void *, u_char *, int);
+	void			(*write_fifo) (void *, u_char *, int);
+	void			*hw;
+	int			slot;	/* multiport card channel slot */
+	struct timer_list	timer;
+	/* receive data */
+	struct sk_buff		*rx_skb;
+	int			maxlen;
+	/* send data */
+	struct sk_buff		*next_skb;
+	struct sk_buff		*tx_skb;
+	struct sk_buff_head	rqueue;
+	int			rcount;
+	int			tx_idx;
+	int			debug;
+	/* statistics */
+	int			err_crc;
+	int			err_tx;
+	int			err_rx;
+};
+
+extern int	mISDN_initdchannel(struct dchannel *, int, void *);
+extern int	mISDN_initbchannel(struct bchannel *, int);
+extern int	mISDN_freedchannel(struct dchannel *);
+extern int	mISDN_freebchannel(struct bchannel *);
+extern void	queue_ch_frame(struct mISDNchannel *, u_int,
+			int, struct sk_buff *);
+extern int	dchannel_senddata(struct dchannel *, struct sk_buff *);
+extern int	bchannel_senddata(struct bchannel *, struct sk_buff *);
+extern void	recv_Dchannel(struct dchannel *);
+extern void	recv_Bchannel(struct bchannel *);
+extern void	recv_Dchannel_skb(struct dchannel *, struct sk_buff *);
+extern void	recv_Bchannel_skb(struct bchannel *, struct sk_buff *);
+extern void	confirm_Bsend(struct bchannel *bch);
+extern int	get_next_bframe(struct bchannel *);
+extern int	get_next_dframe(struct dchannel *);
+
+#endif
diff --git a/include/linux/mISDNif.h b/include/linux/mISDNif.h
new file mode 100644
index 000000000000..8f2d60da04e7
--- /dev/null
+++ b/include/linux/mISDNif.h
@@ -0,0 +1,509 @@
+/*
+ *
+ * Author	Karsten Keil <kkeil@novell.com>
+ *
+ * Copyright 2008  by Karsten Keil <kkeil@novell.com>
+ *
+ * This code is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU LESSER GENERAL PUBLIC LICENSE
+ * version 2.1 as published by the Free Software Foundation.
+ *
+ * This code is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU LESSER GENERAL PUBLIC LICENSE for more details.
+ *
+ */
+
+#ifndef mISDNIF_H
+#define mISDNIF_H
+
+#include <stdarg.h>
+#include <linux/types.h>
+#include <linux/errno.h>
+#include <linux/socket.h>
+
+/*
+ * ABI Version 32 bit
+ *
+ * <8 bit> Major version
+ *		- changed if any interface become backwards incompatible
+ *
+ * <8 bit> Minor version
+ *              - changed if any interface is extended but backwards compatible
+ *
+ * <16 bit> Release number
+ *              - should be incremented on every checkin
+ */
+#define	MISDN_MAJOR_VERSION	1
+#define	MISDN_MINOR_VERSION	0
+#define MISDN_RELEASE		19
+
+/* primitives for information exchange
+ * generell format
+ * <16  bit  0 >
+ * <8  bit command>
+ *    BIT 8 = 1 LAYER private
+ *    BIT 7 = 1 answer
+ *    BIT 6 = 1 DATA
+ * <8  bit target layer mask>
+ *
+ * Layer = 00 is reserved for general commands
+   Layer = 01  L2 -> HW
+   Layer = 02  HW -> L2
+   Layer = 04  L3 -> L2
+   Layer = 08  L2 -> L3
+ * Layer = FF is reserved for broadcast commands
+ */
+
+#define MISDN_CMDMASK		0xff00
+#define MISDN_LAYERMASK		0x00ff
+
+/* generell commands */
+#define OPEN_CHANNEL		0x0100
+#define CLOSE_CHANNEL		0x0200
+#define CONTROL_CHANNEL		0x0300
+#define CHECK_DATA		0x0400
+
+/* layer 2 -> layer 1 */
+#define PH_ACTIVATE_REQ		0x0101
+#define PH_DEACTIVATE_REQ	0x0201
+#define PH_DATA_REQ		0x2001
+#define MPH_ACTIVATE_REQ	0x0501
+#define MPH_DEACTIVATE_REQ	0x0601
+#define MPH_INFORMATION_REQ	0x0701
+#define PH_CONTROL_REQ		0x0801
+
+/* layer 1 -> layer 2 */
+#define PH_ACTIVATE_IND		0x0102
+#define PH_ACTIVATE_CNF		0x4102
+#define PH_DEACTIVATE_IND	0x0202
+#define PH_DEACTIVATE_CNF	0x4202
+#define PH_DATA_IND		0x2002
+#define MPH_ACTIVATE_IND	0x0502
+#define MPH_DEACTIVATE_IND	0x0602
+#define MPH_INFORMATION_IND	0x0702
+#define PH_DATA_CNF		0x6002
+#define PH_CONTROL_IND		0x0802
+#define PH_CONTROL_CNF		0x4802
+
+/* layer 3 -> layer 2 */
+#define DL_ESTABLISH_REQ	0x1004
+#define DL_RELEASE_REQ		0x1104
+#define DL_DATA_REQ		0x3004
+#define DL_UNITDATA_REQ		0x3104
+#define DL_INFORMATION_REQ	0x0004
+
+/* layer 2 -> layer 3 */
+#define DL_ESTABLISH_IND	0x1008
+#define DL_ESTABLISH_CNF	0x5008
+#define DL_RELEASE_IND		0x1108
+#define DL_RELEASE_CNF		0x5108
+#define DL_DATA_IND		0x3008
+#define DL_UNITDATA_IND		0x3108
+#define DL_INFORMATION_IND	0x0008
+
+/* intern layer 2 managment */
+#define MDL_ASSIGN_REQ		0x1804
+#define MDL_ASSIGN_IND		0x1904
+#define MDL_REMOVE_REQ		0x1A04
+#define MDL_REMOVE_IND		0x1B04
+#define MDL_STATUS_UP_IND	0x1C04
+#define MDL_STATUS_DOWN_IND	0x1D04
+#define MDL_STATUS_UI_IND	0x1E04
+#define MDL_ERROR_IND		0x1F04
+#define MDL_ERROR_RSP		0x5F04
+
+/* DL_INFORMATION_IND types */
+#define DL_INFO_L2_CONNECT	0x0001
+#define DL_INFO_L2_REMOVED	0x0002
+
+/* PH_CONTROL types */
+/* TOUCH TONE IS 0x20XX  XX "0"..."9", "A","B","C","D","*","#" */
+#define DTMF_TONE_VAL		0x2000
+#define DTMF_TONE_MASK		0x007F
+#define DTMF_TONE_START		0x2100
+#define DTMF_TONE_STOP		0x2200
+#define DTMF_HFC_COEF		0x4000
+#define DSP_CONF_JOIN		0x2403
+#define DSP_CONF_SPLIT		0x2404
+#define DSP_RECEIVE_OFF		0x2405
+#define DSP_RECEIVE_ON		0x2406
+#define DSP_ECHO_ON		0x2407
+#define DSP_ECHO_OFF		0x2408
+#define DSP_MIX_ON		0x2409
+#define DSP_MIX_OFF		0x240a
+#define DSP_DELAY		0x240b
+#define DSP_JITTER		0x240c
+#define DSP_TXDATA_ON		0x240d
+#define DSP_TXDATA_OFF		0x240e
+#define DSP_TX_DEJITTER		0x240f
+#define DSP_TX_DEJ_OFF		0x2410
+#define DSP_TONE_PATT_ON	0x2411
+#define DSP_TONE_PATT_OFF	0x2412
+#define DSP_VOL_CHANGE_TX	0x2413
+#define DSP_VOL_CHANGE_RX	0x2414
+#define DSP_BF_ENABLE_KEY	0x2415
+#define DSP_BF_DISABLE		0x2416
+#define DSP_BF_ACCEPT		0x2416
+#define DSP_BF_REJECT		0x2417
+#define DSP_PIPELINE_CFG	0x2418
+#define HFC_VOL_CHANGE_TX	0x2601
+#define HFC_VOL_CHANGE_RX	0x2602
+#define HFC_SPL_LOOP_ON		0x2603
+#define HFC_SPL_LOOP_OFF	0x2604
+
+/* DSP_TONE_PATT_ON parameter */
+#define TONE_OFF			0x0000
+#define TONE_GERMAN_DIALTONE		0x0001
+#define TONE_GERMAN_OLDDIALTONE		0x0002
+#define TONE_AMERICAN_DIALTONE		0x0003
+#define TONE_GERMAN_DIALPBX		0x0004
+#define TONE_GERMAN_OLDDIALPBX		0x0005
+#define TONE_AMERICAN_DIALPBX		0x0006
+#define TONE_GERMAN_RINGING		0x0007
+#define TONE_GERMAN_OLDRINGING		0x0008
+#define TONE_AMERICAN_RINGPBX		0x000b
+#define TONE_GERMAN_RINGPBX		0x000c
+#define TONE_GERMAN_OLDRINGPBX		0x000d
+#define TONE_AMERICAN_RINGING		0x000e
+#define TONE_GERMAN_BUSY		0x000f
+#define TONE_GERMAN_OLDBUSY		0x0010
+#define TONE_AMERICAN_BUSY		0x0011
+#define TONE_GERMAN_HANGUP		0x0012
+#define TONE_GERMAN_OLDHANGUP		0x0013
+#define TONE_AMERICAN_HANGUP		0x0014
+#define TONE_SPECIAL_INFO		0x0015
+#define TONE_GERMAN_GASSENBESETZT	0x0016
+#define TONE_GERMAN_AUFSCHALTTON	0x0016
+
+/* MPH_INFORMATION_IND */
+#define L1_SIGNAL_LOS_OFF	0x0010
+#define L1_SIGNAL_LOS_ON	0x0011
+#define L1_SIGNAL_AIS_OFF	0x0012
+#define L1_SIGNAL_AIS_ON	0x0013
+#define L1_SIGNAL_RDI_OFF	0x0014
+#define L1_SIGNAL_RDI_ON	0x0015
+#define L1_SIGNAL_SLIP_RX	0x0020
+#define L1_SIGNAL_SLIP_TX	0x0021
+
+/*
+ * protocol ids
+ * D channel 1-31
+ * B channel 33 - 63
+ */
+
+#define ISDN_P_NONE		0
+#define ISDN_P_BASE		0
+#define ISDN_P_TE_S0		0x01
+#define ISDN_P_NT_S0  		0x02
+#define ISDN_P_TE_E1		0x03
+#define ISDN_P_NT_E1  		0x04
+#define ISDN_P_LAPD_TE		0x10
+#define	ISDN_P_LAPD_NT		0x11
+
+#define ISDN_P_B_MASK		0x1f
+#define ISDN_P_B_START		0x20
+
+#define ISDN_P_B_RAW		0x21
+#define ISDN_P_B_HDLC		0x22
+#define ISDN_P_B_X75SLP		0x23
+#define ISDN_P_B_L2DTMF		0x24
+#define ISDN_P_B_L2DSP		0x25
+#define ISDN_P_B_L2DSPHDLC	0x26
+
+#define OPTION_L2_PMX		1
+#define OPTION_L2_PTP		2
+#define OPTION_L2_FIXEDTEI	3
+#define OPTION_L2_CLEANUP	4
+
+/* should be in sync with linux/kobject.h:KOBJ_NAME_LEN */
+#define MISDN_MAX_IDLEN		20
+
+struct mISDNhead {
+	unsigned int	prim;
+	unsigned int	id;
+}  __attribute__((packed));
+
+#define MISDN_HEADER_LEN	sizeof(struct mISDNhead)
+#define MAX_DATA_SIZE		2048
+#define MAX_DATA_MEM		(MAX_DATA_SIZE + MISDN_HEADER_LEN)
+#define MAX_DFRAME_LEN		260
+
+#define MISDN_ID_ADDR_MASK	0xFFFF
+#define MISDN_ID_TEI_MASK	0xFF00
+#define MISDN_ID_SAPI_MASK	0x00FF
+#define MISDN_ID_TEI_ANY	0x7F00
+
+#define MISDN_ID_ANY		0xFFFF
+#define MISDN_ID_NONE		0xFFFE
+
+#define GROUP_TEI		127
+#define TEI_SAPI		63
+#define CTRL_SAPI		0
+
+#define MISDN_MAX_CHANNEL	127
+#define MISDN_CHMAP_SIZE	((MISDN_MAX_CHANNEL + 1) >> 3)
+
+#define SOL_MISDN	0
+
+struct sockaddr_mISDN {
+	sa_family_t    family;
+	unsigned char	dev;
+	unsigned char	channel;
+	unsigned char	sapi;
+	unsigned char	tei;
+};
+
+/* timer device ioctl */
+#define IMADDTIMER	_IOR('I', 64, int)
+#define IMDELTIMER	_IOR('I', 65, int)
+/* socket ioctls */
+#define	IMGETVERSION	_IOR('I', 66, int)
+#define	IMGETCOUNT	_IOR('I', 67, int)
+#define IMGETDEVINFO	_IOR('I', 68, int)
+#define IMCTRLREQ	_IOR('I', 69, int)
+#define IMCLEAR_L2	_IOR('I', 70, int)
+
+struct mISDNversion {
+	unsigned char	major;
+	unsigned char	minor;
+	unsigned short	release;
+};
+
+struct mISDN_devinfo {
+	u_int			id;
+	u_int			Dprotocols;
+	u_int			Bprotocols;
+	u_int			protocol;
+	u_char			channelmap[MISDN_CHMAP_SIZE];
+	u_int			nrbchan;
+	char			name[MISDN_MAX_IDLEN];
+};
+
+static inline int
+test_channelmap(u_int nr, u_char *map)
+{
+	if (nr <= MISDN_MAX_CHANNEL)
+		return map[nr >> 3] & (1 << (nr & 7));
+	else
+		return 0;
+}
+
+static inline void
+set_channelmap(u_int nr, u_char *map)
+{
+	map[nr >> 3] |= (1 << (nr & 7));
+}
+
+static inline void
+clear_channelmap(u_int nr, u_char *map)
+{
+	map[nr >> 3] &= ~(1 << (nr & 7));
+}
+
+/* CONTROL_CHANNEL parameters */
+#define MISDN_CTRL_GETOP		0x0000
+#define MISDN_CTRL_LOOP			0x0001
+#define MISDN_CTRL_CONNECT		0x0002
+#define MISDN_CTRL_DISCONNECT		0x0004
+#define MISDN_CTRL_PCMCONNECT		0x0010
+#define MISDN_CTRL_PCMDISCONNECT	0x0020
+#define MISDN_CTRL_SETPEER		0x0040
+#define MISDN_CTRL_UNSETPEER		0x0080
+#define MISDN_CTRL_RX_OFF		0x0100
+#define MISDN_CTRL_HW_FEATURES_OP	0x2000
+#define MISDN_CTRL_HW_FEATURES		0x2001
+#define MISDN_CTRL_HFC_OP		0x4000
+#define MISDN_CTRL_HFC_PCM_CONN		0x4001
+#define MISDN_CTRL_HFC_PCM_DISC		0x4002
+#define MISDN_CTRL_HFC_CONF_JOIN	0x4003
+#define MISDN_CTRL_HFC_CONF_SPLIT	0x4004
+#define MISDN_CTRL_HFC_RECEIVE_OFF	0x4005
+#define MISDN_CTRL_HFC_RECEIVE_ON	0x4006
+#define MISDN_CTRL_HFC_ECHOCAN_ON 	0x4007
+#define MISDN_CTRL_HFC_ECHOCAN_OFF 	0x4008
+
+
+/* socket options */
+#define MISDN_TIME_STAMP		0x0001
+
+struct mISDN_ctrl_req {
+	int		op;
+	int		channel;
+	int		p1;
+	int		p2;
+};
+
+/* muxer options */
+#define MISDN_OPT_ALL		1
+#define MISDN_OPT_TEIMGR	2
+
+#ifdef __KERNEL__
+#include <linux/list.h>
+#include <linux/skbuff.h>
+#include <linux/net.h>
+#include <net/sock.h>
+#include <linux/completion.h>
+
+#define DEBUG_CORE		0x000000ff
+#define DEBUG_CORE_FUNC		0x00000002
+#define DEBUG_SOCKET		0x00000004
+#define DEBUG_MANAGER		0x00000008
+#define DEBUG_SEND_ERR		0x00000010
+#define DEBUG_MSG_THREAD	0x00000020
+#define DEBUG_QUEUE_FUNC	0x00000040
+#define DEBUG_L1		0x0000ff00
+#define DEBUG_L1_FSM		0x00000200
+#define DEBUG_L2		0x00ff0000
+#define DEBUG_L2_FSM		0x00020000
+#define DEBUG_L2_CTRL		0x00040000
+#define DEBUG_L2_RECV		0x00080000
+#define DEBUG_L2_TEI		0x00100000
+#define DEBUG_L2_TEIFSM		0x00200000
+#define DEBUG_TIMER		0x01000000
+
+#define mISDN_HEAD_P(s)		((struct mISDNhead *)&s->cb[0])
+#define mISDN_HEAD_PRIM(s)	(((struct mISDNhead *)&s->cb[0])->prim)
+#define mISDN_HEAD_ID(s)	(((struct mISDNhead *)&s->cb[0])->id)
+
+/* socket states */
+#define MISDN_OPEN	1
+#define MISDN_BOUND	2
+#define MISDN_CLOSED	3
+
+struct mISDNchannel;
+struct mISDNdevice;
+struct mISDNstack;
+
+struct channel_req {
+	u_int			protocol;
+	struct sockaddr_mISDN	adr;
+	struct mISDNchannel	*ch;
+};
+
+typedef	int	(ctrl_func_t)(struct mISDNchannel *, u_int, void *);
+typedef	int	(send_func_t)(struct mISDNchannel *, struct sk_buff *);
+typedef int	(create_func_t)(struct channel_req *);
+
+struct Bprotocol {
+	struct list_head	list;
+	char			*name;
+	u_int			Bprotocols;
+	create_func_t		*create;
+};
+
+struct mISDNchannel {
+	struct list_head	list;
+	u_int			protocol;
+	u_int			nr;
+	u_long			opt;
+	u_int			addr;
+	struct mISDNstack	*st;
+	struct mISDNchannel	*peer;
+	send_func_t		*send;
+	send_func_t		*recv;
+	ctrl_func_t		*ctrl;
+};
+
+struct mISDN_sock_list {
+	struct hlist_head	head;
+	rwlock_t		lock;
+};
+
+struct mISDN_sock {
+	struct sock		sk;
+	struct mISDNchannel	ch;
+	u_int			cmask;
+	struct mISDNdevice	*dev;
+};
+
+
+
+struct mISDNdevice {
+	struct mISDNchannel	D;
+	u_int			id;
+	char			name[MISDN_MAX_IDLEN];
+	u_int			Dprotocols;
+	u_int			Bprotocols;
+	u_int			nrbchan;
+	u_char			channelmap[MISDN_CHMAP_SIZE];
+	struct list_head	bchannels;
+	struct mISDNchannel	*teimgr;
+	struct device		dev;
+};
+
+struct mISDNstack {
+	u_long			status;
+	struct mISDNdevice	*dev;
+	struct task_struct	*thread;
+	struct completion	*notify;
+	wait_queue_head_t	workq;
+	struct sk_buff_head	msgq;
+	struct list_head	layer2;
+	struct mISDNchannel	*layer1;
+	struct mISDNchannel	own;
+	struct mutex		lmutex; /* protect lists */
+	struct mISDN_sock_list	l1sock;
+#ifdef MISDN_MSG_STATS
+	u_int			msg_cnt;
+	u_int			sleep_cnt;
+	u_int			stopped_cnt;
+#endif
+};
+
+/* global alloc/queue functions */
+
+static inline struct sk_buff *
+mI_alloc_skb(unsigned int len, gfp_t gfp_mask)
+{
+	struct sk_buff	*skb;
+
+	skb = alloc_skb(len + MISDN_HEADER_LEN, gfp_mask);
+	if (likely(skb))
+		skb_reserve(skb, MISDN_HEADER_LEN);
+	return skb;
+}
+
+static inline struct sk_buff *
+_alloc_mISDN_skb(u_int prim, u_int id, u_int len, void *dp, gfp_t gfp_mask)
+{
+	struct sk_buff	*skb = mI_alloc_skb(len, gfp_mask);
+	struct mISDNhead *hh;
+
+	if (!skb)
+		return NULL;
+	if (len)
+		memcpy(skb_put(skb, len), dp, len);
+	hh = mISDN_HEAD_P(skb);
+	hh->prim = prim;
+	hh->id = id;
+	return skb;
+}
+
+static inline void
+_queue_data(struct mISDNchannel *ch, u_int prim,
+    u_int id, u_int len, void *dp, gfp_t gfp_mask)
+{
+	struct sk_buff		*skb;
+
+	if (!ch->peer)
+		return;
+	skb = _alloc_mISDN_skb(prim, id, len, dp, gfp_mask);
+	if (!skb)
+		return;
+	if (ch->recv(ch->peer, skb))
+		dev_kfree_skb(skb);
+}
+
+/* global register/unregister functions */
+
+extern int	mISDN_register_device(struct mISDNdevice *, char *name);
+extern void	mISDN_unregister_device(struct mISDNdevice *);
+extern int	mISDN_register_Bprotocol(struct Bprotocol *);
+extern void	mISDN_unregister_Bprotocol(struct Bprotocol *);
+
+extern void	set_channel_address(struct mISDNchannel *, u_int, u_int);
+
+#endif /* __KERNEL__ */
+#endif /* mISDNIF_H */
diff --git a/include/linux/maple.h b/include/linux/maple.h
index d31e36ebb436..c23d3f51ba40 100644
--- a/include/linux/maple.h
+++ b/include/linux/maple.h
@@ -2,6 +2,7 @@
 #define __LINUX_MAPLE_H
 
 #include <linux/device.h>
+#include <mach/maple.h>
 
 extern struct bus_type maple_bus_type;
 
@@ -33,6 +34,7 @@ struct mapleq {
 	void *sendbuf, *recvbuf, *recvbufdcsp;
 	unsigned char length;
 	enum maple_code command;
+	struct mutex mutex;
 };
 
 struct maple_devinfo {
@@ -49,7 +51,6 @@ struct maple_devinfo {
 struct maple_device {
 	struct maple_driver *driver;
 	struct mapleq *mq;
-	void *private_data;
 	void (*callback) (struct mapleq * mq);
 	unsigned long when, interval, function;
 	struct maple_devinfo devinfo;
@@ -61,8 +62,6 @@ struct maple_device {
 
 struct maple_driver {
 	unsigned long function;
-	int (*connect) (struct maple_device * dev);
-	void (*disconnect) (struct maple_device * dev);
 	struct device_driver drv;
 };
 
@@ -70,10 +69,17 @@ void maple_getcond_callback(struct maple_device *dev,
 			    void (*callback) (struct mapleq * mq),
 			    unsigned long interval,
 			    unsigned long function);
-int maple_driver_register(struct device_driver *drv);
-void maple_add_packet(struct mapleq *mq);
+int maple_driver_register(struct maple_driver *);
+void maple_driver_unregister(struct maple_driver *);
+
+int maple_add_packet_sleeps(struct maple_device *mdev, u32 function,
+	u32 command, u32 length, void *data);
+void maple_clear_dev(struct maple_device *mdev);
 
 #define to_maple_dev(n) container_of(n, struct maple_device, dev)
 #define to_maple_driver(n) container_of(n, struct maple_driver, drv)
 
+#define maple_get_drvdata(d)		dev_get_drvdata(&(d)->dev)
+#define maple_set_drvdata(d,p)		dev_set_drvdata(&(d)->dev, (p))
+
 #endif				/* __LINUX_MAPLE_H */
diff --git a/include/linux/memcontrol.h b/include/linux/memcontrol.h
index e6608776bc96..fdf3967e1397 100644
--- a/include/linux/memcontrol.h
+++ b/include/linux/memcontrol.h
@@ -35,7 +35,10 @@ extern int mem_cgroup_charge(struct page *page, struct mm_struct *mm,
 extern int mem_cgroup_cache_charge(struct page *page, struct mm_struct *mm,
 					gfp_t gfp_mask);
 extern void mem_cgroup_uncharge_page(struct page *page);
+extern void mem_cgroup_uncharge_cache_page(struct page *page);
 extern void mem_cgroup_move_lists(struct page *page, bool active);
+extern int mem_cgroup_shrink_usage(struct mm_struct *mm, gfp_t gfp_mask);
+
 extern unsigned long mem_cgroup_isolate_pages(unsigned long nr_to_scan,
 					struct list_head *dst,
 					unsigned long *scanned, int order,
@@ -50,9 +53,9 @@ extern struct mem_cgroup *mem_cgroup_from_task(struct task_struct *p);
 #define mm_match_cgroup(mm, cgroup)	\
 	((cgroup) == mem_cgroup_from_task((mm)->owner))
 
-extern int mem_cgroup_prepare_migration(struct page *page);
+extern int
+mem_cgroup_prepare_migration(struct page *page, struct page *newpage);
 extern void mem_cgroup_end_migration(struct page *page);
-extern void mem_cgroup_page_migration(struct page *page, struct page *newpage);
 
 /*
  * For memory reclaim.
@@ -97,6 +100,15 @@ static inline void mem_cgroup_uncharge_page(struct page *page)
 {
 }
 
+static inline void mem_cgroup_uncharge_cache_page(struct page *page)
+{
+}
+
+static inline int mem_cgroup_shrink_usage(struct mm_struct *mm, gfp_t gfp_mask)
+{
+	return 0;
+}
+
 static inline void mem_cgroup_move_lists(struct page *page, bool active)
 {
 }
@@ -112,7 +124,8 @@ static inline int task_in_mem_cgroup(struct task_struct *task,
 	return 1;
 }
 
-static inline int mem_cgroup_prepare_migration(struct page *page)
+static inline int
+mem_cgroup_prepare_migration(struct page *page, struct page *newpage)
 {
 	return 0;
 }
@@ -121,11 +134,6 @@ static inline void mem_cgroup_end_migration(struct page *page)
 {
 }
 
-static inline void
-mem_cgroup_page_migration(struct page *page, struct page *newpage)
-{
-}
-
 static inline int mem_cgroup_calc_mapped_ratio(struct mem_cgroup *mem)
 {
 	return 0;
diff --git a/include/linux/memstick.h b/include/linux/memstick.h
index 37a5cdb03918..a9f998a3f48b 100644
--- a/include/linux/memstick.h
+++ b/include/linux/memstick.h
@@ -263,6 +263,10 @@ struct memstick_dev {
 	/* Get next request from the media driver.                         */
 	int                      (*next_request)(struct memstick_dev *card,
 						 struct memstick_request **mrq);
+	/* Tell the media driver to stop doing things                      */
+	void                     (*stop)(struct memstick_dev *card);
+	/* Allow the media driver to continue                              */
+	void                     (*start)(struct memstick_dev *card);
 
 	struct device            dev;
 };
@@ -284,7 +288,7 @@ struct memstick_host {
 	/* Notify the host that some requests are pending. */
 	void                (*request)(struct memstick_host *host);
 	/* Set host IO parameters (power, clock, etc).     */
-	void                (*set_param)(struct memstick_host *host,
+	int                 (*set_param)(struct memstick_host *host,
 					 enum memstick_param param,
 					 int value);
 	unsigned long       private[0] ____cacheline_aligned;
diff --git a/include/linux/mfd/core.h b/include/linux/mfd/core.h
index bb3dd0545928..49ef857cdb2d 100644
--- a/include/linux/mfd/core.h
+++ b/include/linux/mfd/core.h
@@ -1,5 +1,3 @@
-#ifndef MFD_CORE_H
-#define MFD_CORE_H
 /*
  * drivers/mfd/mfd-core.h
  *
@@ -13,6 +11,9 @@
  *
  */
 
+#ifndef MFD_CORE_H
+#define MFD_CORE_H
+
 #include <linux/platform_device.h>
 
 /*
@@ -28,7 +29,13 @@ struct mfd_cell {
 	int			(*suspend)(struct platform_device *dev);
 	int			(*resume)(struct platform_device *dev);
 
-	void			*driver_data; /* driver-specific data */
+	/* driver-specific data for MFD-aware "cell" drivers */
+	void			*driver_data;
+
+	/* platform_data can be used to either pass data to "generic"
+	   driver or as a hook to mfd_cell for the "cell" drivers */
+	void			*platform_data;
+	size_t			data_size;
 
 	/*
 	 * This resources can be specified relatievly to the parent device.
@@ -38,18 +45,11 @@ struct mfd_cell {
 	const struct resource	*resources;
 };
 
-static inline struct mfd_cell *
-mfd_get_cell(struct platform_device *pdev)
-{
-	return (struct mfd_cell *)pdev->dev.platform_data;
-}
-
-extern int mfd_add_devices(
-		struct platform_device *parent,
-		const struct mfd_cell *cells, int n_devs,
-		struct resource *mem_base,
-		int irq_base);
+extern int mfd_add_devices(struct device *parent, int id,
+			   const struct mfd_cell *cells, int n_devs,
+			   struct resource *mem_base,
+			   int irq_base);
 
-extern void mfd_remove_devices(struct platform_device *parent);
+extern void mfd_remove_devices(struct device *parent);
 
 #endif
diff --git a/include/linux/mfd/t7l66xb.h b/include/linux/mfd/t7l66xb.h
new file mode 100644
index 000000000000..e83c7f2036f9
--- /dev/null
+++ b/include/linux/mfd/t7l66xb.h
@@ -0,0 +1,36 @@
+/*
+ * This file contains the definitions for the T7L66XB
+ *
+ * (C) Copyright 2005 Ian Molton <spyro@f2s.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+#ifndef MFD_T7L66XB_H
+#define MFD_T7L66XB_H
+
+#include <linux/mfd/core.h>
+#include <linux/mfd/tmio.h>
+
+struct t7l66xb_platform_data {
+	int (*enable_clk32k)(struct platform_device *dev);
+	void (*disable_clk32k)(struct platform_device *dev);
+	int (*enable)(struct platform_device *dev);
+	int (*disable)(struct platform_device *dev);
+	int (*suspend)(struct platform_device *dev);
+	int (*resume)(struct platform_device *dev);
+
+	int irq_base; /* The base for subdevice irqs */
+
+	struct tmio_nand_data *nand_data;
+};
+
+
+#define IRQ_T7L66XB_MMC        (1)
+#define IRQ_T7L66XB_NAND       (3)
+
+#define T7L66XB_NR_IRQS	8
+
+#endif
diff --git a/include/linux/mfd/tc6387xb.h b/include/linux/mfd/tc6387xb.h
new file mode 100644
index 000000000000..fa06e0610b8e
--- /dev/null
+++ b/include/linux/mfd/tc6387xb.h
@@ -0,0 +1,23 @@
+/*
+ * This file contains the definitions for the TC6387XB
+ *
+ * (C) Copyright 2005 Ian Molton <spyro@f2s.com>
+ *
+ * May be copied or modified under the terms of the GNU General Public
+ * License.  See linux/COPYING for more information.
+ *
+ */
+#ifndef MFD_TC6387XB_H
+#define MFD_TC6387XB_H
+
+struct tc6387xb_platform_data {
+	int (*enable_clk32k)(struct platform_device *dev);
+	void (*disable_clk32k)(struct platform_device *dev);
+
+	int (*enable)(struct platform_device *dev);
+	int (*disable)(struct platform_device *dev);
+	int (*suspend)(struct platform_device *dev);
+	int (*resume)(struct platform_device *dev);
+};
+
+#endif
diff --git a/include/linux/mfd/tc6393xb.h b/include/linux/mfd/tc6393xb.h
index 7cc824a58f7c..fec7b3f7a81f 100644
--- a/include/linux/mfd/tc6393xb.h
+++ b/include/linux/mfd/tc6393xb.h
@@ -14,8 +14,8 @@
  * published by the Free Software Foundation.
  */
 
-#ifndef TC6393XB_H
-#define TC6393XB_H
+#ifndef MFD_TC6393XB_H
+#define MFD_TC6393XB_H
 
 /* Also one should provide the CK3P6MI clock */
 struct tc6393xb_platform_data {
@@ -29,7 +29,7 @@ struct tc6393xb_platform_data {
 	int	(*suspend)(struct platform_device *dev);
 	int	(*resume)(struct platform_device *dev);
 
-	int	irq_base;	/* a base for cascaded irq */
+	int	irq_base;	/* base for subdevice irqs */
 	int	gpio_base;
 
 	struct tmio_nand_data	*nand_data;
@@ -40,9 +40,6 @@ struct tc6393xb_platform_data {
  */
 #define	IRQ_TC6393_NAND		0
 #define	IRQ_TC6393_MMC		1
-#define	IRQ_TC6393_OHCI		2
-#define	IRQ_TC6393_SERIAL	3
-#define	IRQ_TC6393_FB		4
 
 #define	TC6393XB_NR_IRQS	8
 
diff --git a/include/linux/mfd/tmio.h b/include/linux/mfd/tmio.h
index 9438d8c9ac1c..ec612e66391c 100644
--- a/include/linux/mfd/tmio.h
+++ b/include/linux/mfd/tmio.h
@@ -1,6 +1,21 @@
 #ifndef MFD_TMIO_H
 #define MFD_TMIO_H
 
+#define tmio_ioread8(addr) readb(addr)
+#define tmio_ioread16(addr) readw(addr)
+#define tmio_ioread16_rep(r, b, l) readsw(r, b, l)
+#define tmio_ioread32(addr) \
+	(((u32) readw((addr))) | (((u32) readw((addr) + 2)) << 16))
+
+#define tmio_iowrite8(val, addr) writeb((val), (addr))
+#define tmio_iowrite16(val, addr) writew((val), (addr))
+#define tmio_iowrite16_rep(r, b, l) writesw(r, b, l)
+#define tmio_iowrite32(val, addr) \
+	do { \
+	writew((val),       (addr)); \
+	writew((val) >> 16, (addr) + 2); \
+	} while (0)
+
 /*
  * data for the NAND controller
  */
@@ -10,8 +25,4 @@ struct tmio_nand_data {
 	unsigned int		num_partitions;
 };
 
-#define TMIO_NAND_CONFIG	"tmio-nand-config"
-#define TMIO_NAND_CONTROL	"tmio-nand-control"
-#define TMIO_NAND_IRQ		"tmio-nand"
-
 #endif
diff --git a/include/linux/mlx4/cq.h b/include/linux/mlx4/cq.h
index 071cf96cf01f..6f65b2c8bb89 100644
--- a/include/linux/mlx4/cq.h
+++ b/include/linux/mlx4/cq.h
@@ -39,17 +39,18 @@
 #include <linux/mlx4/doorbell.h>
 
 struct mlx4_cqe {
-	__be32			my_qpn;
+	__be32			vlan_my_qpn;
 	__be32			immed_rss_invalid;
 	__be32			g_mlpath_rqpn;
-	u8			sl;
-	u8			reserved1;
+	__be16			sl_vid;
 	__be16			rlid;
-	__be32			ipoib_status;
+	__be16			status;
+	u8			ipv6_ext_mask;
+	u8			badfcs_enc;
 	__be32			byte_cnt;
 	__be16			wqe_index;
 	__be16			checksum;
-	u8			reserved2[3];
+	u8			reserved[3];
 	u8			owner_sr_opcode;
 };
 
@@ -64,6 +65,11 @@ struct mlx4_err_cqe {
 };
 
 enum {
+	MLX4_CQE_VLAN_PRESENT_MASK	= 1 << 29,
+	MLX4_CQE_QPN_MASK		= 0xffffff,
+};
+
+enum {
 	MLX4_CQE_OWNER_MASK	= 0x80,
 	MLX4_CQE_IS_SEND_MASK	= 0x40,
 	MLX4_CQE_OPCODE_MASK	= 0x1f
@@ -86,13 +92,19 @@ enum {
 };
 
 enum {
-	MLX4_CQE_IPOIB_STATUS_IPV4			= 1 << 22,
-	MLX4_CQE_IPOIB_STATUS_IPV4F			= 1 << 23,
-	MLX4_CQE_IPOIB_STATUS_IPV6			= 1 << 24,
-	MLX4_CQE_IPOIB_STATUS_IPV4OPT			= 1 << 25,
-	MLX4_CQE_IPOIB_STATUS_TCP			= 1 << 26,
-	MLX4_CQE_IPOIB_STATUS_UDP			= 1 << 27,
-	MLX4_CQE_IPOIB_STATUS_IPOK			= 1 << 28,
+	MLX4_CQE_STATUS_IPV4		= 1 << 6,
+	MLX4_CQE_STATUS_IPV4F		= 1 << 7,
+	MLX4_CQE_STATUS_IPV6		= 1 << 8,
+	MLX4_CQE_STATUS_IPV4OPT		= 1 << 9,
+	MLX4_CQE_STATUS_TCP		= 1 << 10,
+	MLX4_CQE_STATUS_UDP		= 1 << 11,
+	MLX4_CQE_STATUS_IPOK		= 1 << 12,
+};
+
+enum {
+	MLX4_CQE_LLC                     = 1,
+	MLX4_CQE_SNAP                    = 1 << 1,
+	MLX4_CQE_BAD_FCS                 = 1 << 4,
 };
 
 static inline void mlx4_cq_arm(struct mlx4_cq *cq, u32 cmd,
diff --git a/include/linux/mlx4/qp.h b/include/linux/mlx4/qp.h
index e27082cd650e..bf8f11982dae 100644
--- a/include/linux/mlx4/qp.h
+++ b/include/linux/mlx4/qp.h
@@ -164,11 +164,13 @@ enum {
 	MLX4_WQE_CTRL_SOLICITED		= 1 << 1,
 	MLX4_WQE_CTRL_IP_CSUM		= 1 << 4,
 	MLX4_WQE_CTRL_TCP_UDP_CSUM	= 1 << 5,
+	MLX4_WQE_CTRL_INS_VLAN		= 1 << 6,
 };
 
 struct mlx4_wqe_ctrl_seg {
 	__be32			owner_opcode;
-	u8			reserved2[3];
+	__be16			vlan_tag;
+	u8			ins_vlan;
 	u8			fence_size;
 	/*
 	 * High 24 bits are SRC remote buffer; low 8 bits are flags:
diff --git a/include/linux/mm.h b/include/linux/mm.h
index d87a5a5fe87d..72a15dc26bbf 100644
--- a/include/linux/mm.h
+++ b/include/linux/mm.h
@@ -73,7 +73,7 @@ extern unsigned int kobjsize(const void *objp);
 #endif
 
 /*
- * vm_flags..
+ * vm_flags in vm_area_struct, see mm_types.h.
  */
 #define VM_READ		0x00000001	/* currently active flags */
 #define VM_WRITE	0x00000002
@@ -744,6 +744,8 @@ struct zap_details {
 struct page *vm_normal_page(struct vm_area_struct *vma, unsigned long addr,
 		pte_t pte);
 
+int zap_vma_ptes(struct vm_area_struct *vma, unsigned long address,
+		unsigned long size);
 unsigned long zap_page_range(struct vm_area_struct *vma, unsigned long address,
 		unsigned long size, struct zap_details *);
 unsigned long unmap_vmas(struct mmu_gather **tlb,
@@ -810,7 +812,6 @@ extern int access_process_vm(struct task_struct *tsk, unsigned long addr, void *
 
 int get_user_pages(struct task_struct *tsk, struct mm_struct *mm, unsigned long start,
 		int len, int write, int force, struct page **pages, struct vm_area_struct **vmas);
-void print_bad_pte(struct vm_area_struct *, pte_t, unsigned long);
 
 extern int try_to_release_page(struct page * page, gfp_t gfp_mask);
 extern void do_invalidatepage(struct page *page, unsigned long offset);
@@ -834,6 +835,19 @@ extern int mprotect_fixup(struct vm_area_struct *vma,
 			  unsigned long end, unsigned long newflags);
 
 /*
+ * get_user_pages_fast provides equivalent functionality to get_user_pages,
+ * operating on current and current->mm (force=0 and doesn't return any vmas).
+ *
+ * get_user_pages_fast may take mmap_sem and page tables, so no assumptions
+ * can be made about locking. get_user_pages_fast is to be implemented in a
+ * way that is advantageous (vs get_user_pages()) when the user memory area is
+ * already faulted in and present in ptes. However if the pages have to be
+ * faulted in, it may turn out to be slightly slower).
+ */
+int get_user_pages_fast(unsigned long start, int nr_pages, int write,
+			struct page **pages);
+
+/*
  * A callback you can register to apply pressure to ageable caches.
  *
  * 'shrink' is passed a count 'nr_to_scan' and a 'gfpmask'.  It should
@@ -1009,7 +1023,6 @@ extern unsigned long absent_pages_in_range(unsigned long start_pfn,
 extern void get_pfn_range_for_nid(unsigned int nid,
 			unsigned long *start_pfn, unsigned long *end_pfn);
 extern unsigned long find_min_pfn_with_active_regions(void);
-extern unsigned long find_max_pfn_with_active_regions(void);
 extern void free_bootmem_with_active_regions(int nid,
 						unsigned long max_low_pfn);
 typedef int (*work_fn_t)(unsigned long, unsigned long, void *);
@@ -1072,6 +1085,9 @@ extern struct vm_area_struct *copy_vma(struct vm_area_struct **,
 	unsigned long addr, unsigned long len, pgoff_t pgoff);
 extern void exit_mmap(struct mm_struct *);
 
+extern int mm_take_all_locks(struct mm_struct *mm);
+extern void mm_drop_all_locks(struct mm_struct *mm);
+
 #ifdef CONFIG_PROC_FS
 /* From fs/proc/base.c. callers must _not_ hold the mm's exe_file_lock */
 extern void added_exe_file_vma(struct mm_struct *mm);
diff --git a/include/linux/mm_types.h b/include/linux/mm_types.h
index 02a27ae78539..bf334138c7c1 100644
--- a/include/linux/mm_types.h
+++ b/include/linux/mm_types.h
@@ -10,6 +10,7 @@
 #include <linux/rbtree.h>
 #include <linux/rwsem.h>
 #include <linux/completion.h>
+#include <linux/cpumask.h>
 #include <asm/page.h>
 #include <asm/mmu.h>
 
@@ -112,7 +113,7 @@ struct vm_area_struct {
 	struct vm_area_struct *vm_next;
 
 	pgprot_t vm_page_prot;		/* Access permissions of this VMA. */
-	unsigned long vm_flags;		/* Flags, listed below. */
+	unsigned long vm_flags;		/* Flags, see mm.h. */
 
 	struct rb_node vm_rb;
 
@@ -159,6 +160,17 @@ struct vm_area_struct {
 #endif
 };
 
+struct core_thread {
+	struct task_struct *task;
+	struct core_thread *next;
+};
+
+struct core_state {
+	atomic_t nr_threads;
+	struct core_thread dumper;
+	struct completion startup;
+};
+
 struct mm_struct {
 	struct vm_area_struct * mmap;		/* list of VMAs */
 	struct rb_root mm_rb;
@@ -175,7 +187,6 @@ struct mm_struct {
 	atomic_t mm_users;			/* How many users with user space? */
 	atomic_t mm_count;			/* How many references to "struct mm_struct" (users count as 1) */
 	int map_count;				/* number of VMAs */
-	int core_waiters;
 	struct rw_semaphore mmap_sem;
 	spinlock_t page_table_lock;		/* Protects page tables and some counters */
 
@@ -219,8 +230,7 @@ struct mm_struct {
 
 	unsigned long flags; /* Must use atomic bitops to access the bits */
 
-	/* coredumping support */
-	struct completion *core_startup_done, core_done;
+	struct core_state *core_state; /* coredumping support */
 
 	/* aio bits */
 	rwlock_t		ioctx_list_lock;	/* aio lock */
@@ -244,6 +254,9 @@ struct mm_struct {
 	struct file *exe_file;
 	unsigned long num_exe_file_vmas;
 #endif
+#ifdef CONFIG_MMU_NOTIFIER
+	struct mmu_notifier_mm *mmu_notifier_mm;
+#endif
 };
 
 #endif /* _LINUX_MM_TYPES_H */
diff --git a/include/linux/mmc/card.h b/include/linux/mmc/card.h
index 0d508ac17d64..ee6e822d5994 100644
--- a/include/linux/mmc/card.h
+++ b/include/linux/mmc/card.h
@@ -111,6 +111,8 @@ struct mmc_card {
 	unsigned		num_info;	/* number of info strings */
 	const char		**info;		/* info strings */
 	struct sdio_func_tuple	*tuples;	/* unknown common tuples */
+
+	struct dentry		*debugfs_root;
 };
 
 #define mmc_card_mmc(c)		((c)->type == MMC_TYPE_MMC)
diff --git a/include/linux/mmc/host.h b/include/linux/mmc/host.h
index 10a2080086ca..9c288c909878 100644
--- a/include/linux/mmc/host.h
+++ b/include/linux/mmc/host.h
@@ -157,6 +157,8 @@ struct mmc_host {
 	struct led_trigger	*led;		/* activity led */
 #endif
 
+	struct dentry		*debugfs_root;
+
 	unsigned long		private[0] ____cacheline_aligned;
 };
 
diff --git a/include/linux/mmu_notifier.h b/include/linux/mmu_notifier.h
new file mode 100644
index 000000000000..b77486d152cd
--- /dev/null
+++ b/include/linux/mmu_notifier.h
@@ -0,0 +1,279 @@
+#ifndef _LINUX_MMU_NOTIFIER_H
+#define _LINUX_MMU_NOTIFIER_H
+
+#include <linux/list.h>
+#include <linux/spinlock.h>
+#include <linux/mm_types.h>
+
+struct mmu_notifier;
+struct mmu_notifier_ops;
+
+#ifdef CONFIG_MMU_NOTIFIER
+
+/*
+ * The mmu notifier_mm structure is allocated and installed in
+ * mm->mmu_notifier_mm inside the mm_take_all_locks() protected
+ * critical section and it's released only when mm_count reaches zero
+ * in mmdrop().
+ */
+struct mmu_notifier_mm {
+	/* all mmu notifiers registerd in this mm are queued in this list */
+	struct hlist_head list;
+	/* to serialize the list modifications and hlist_unhashed */
+	spinlock_t lock;
+};
+
+struct mmu_notifier_ops {
+	/*
+	 * Called either by mmu_notifier_unregister or when the mm is
+	 * being destroyed by exit_mmap, always before all pages are
+	 * freed. This can run concurrently with other mmu notifier
+	 * methods (the ones invoked outside the mm context) and it
+	 * should tear down all secondary mmu mappings and freeze the
+	 * secondary mmu. If this method isn't implemented you've to
+	 * be sure that nothing could possibly write to the pages
+	 * through the secondary mmu by the time the last thread with
+	 * tsk->mm == mm exits.
+	 *
+	 * As side note: the pages freed after ->release returns could
+	 * be immediately reallocated by the gart at an alias physical
+	 * address with a different cache model, so if ->release isn't
+	 * implemented because all _software_ driven memory accesses
+	 * through the secondary mmu are terminated by the time the
+	 * last thread of this mm quits, you've also to be sure that
+	 * speculative _hardware_ operations can't allocate dirty
+	 * cachelines in the cpu that could not be snooped and made
+	 * coherent with the other read and write operations happening
+	 * through the gart alias address, so leading to memory
+	 * corruption.
+	 */
+	void (*release)(struct mmu_notifier *mn,
+			struct mm_struct *mm);
+
+	/*
+	 * clear_flush_young is called after the VM is
+	 * test-and-clearing the young/accessed bitflag in the
+	 * pte. This way the VM will provide proper aging to the
+	 * accesses to the page through the secondary MMUs and not
+	 * only to the ones through the Linux pte.
+	 */
+	int (*clear_flush_young)(struct mmu_notifier *mn,
+				 struct mm_struct *mm,
+				 unsigned long address);
+
+	/*
+	 * Before this is invoked any secondary MMU is still ok to
+	 * read/write to the page previously pointed to by the Linux
+	 * pte because the page hasn't been freed yet and it won't be
+	 * freed until this returns. If required set_page_dirty has to
+	 * be called internally to this method.
+	 */
+	void (*invalidate_page)(struct mmu_notifier *mn,
+				struct mm_struct *mm,
+				unsigned long address);
+
+	/*
+	 * invalidate_range_start() and invalidate_range_end() must be
+	 * paired and are called only when the mmap_sem and/or the
+	 * locks protecting the reverse maps are held. The subsystem
+	 * must guarantee that no additional references are taken to
+	 * the pages in the range established between the call to
+	 * invalidate_range_start() and the matching call to
+	 * invalidate_range_end().
+	 *
+	 * Invalidation of multiple concurrent ranges may be
+	 * optionally permitted by the driver. Either way the
+	 * establishment of sptes is forbidden in the range passed to
+	 * invalidate_range_begin/end for the whole duration of the
+	 * invalidate_range_begin/end critical section.
+	 *
+	 * invalidate_range_start() is called when all pages in the
+	 * range are still mapped and have at least a refcount of one.
+	 *
+	 * invalidate_range_end() is called when all pages in the
+	 * range have been unmapped and the pages have been freed by
+	 * the VM.
+	 *
+	 * The VM will remove the page table entries and potentially
+	 * the page between invalidate_range_start() and
+	 * invalidate_range_end(). If the page must not be freed
+	 * because of pending I/O or other circumstances then the
+	 * invalidate_range_start() callback (or the initial mapping
+	 * by the driver) must make sure that the refcount is kept
+	 * elevated.
+	 *
+	 * If the driver increases the refcount when the pages are
+	 * initially mapped into an address space then either
+	 * invalidate_range_start() or invalidate_range_end() may
+	 * decrease the refcount. If the refcount is decreased on
+	 * invalidate_range_start() then the VM can free pages as page
+	 * table entries are removed.  If the refcount is only
+	 * droppped on invalidate_range_end() then the driver itself
+	 * will drop the last refcount but it must take care to flush
+	 * any secondary tlb before doing the final free on the
+	 * page. Pages will no longer be referenced by the linux
+	 * address space but may still be referenced by sptes until
+	 * the last refcount is dropped.
+	 */
+	void (*invalidate_range_start)(struct mmu_notifier *mn,
+				       struct mm_struct *mm,
+				       unsigned long start, unsigned long end);
+	void (*invalidate_range_end)(struct mmu_notifier *mn,
+				     struct mm_struct *mm,
+				     unsigned long start, unsigned long end);
+};
+
+/*
+ * The notifier chains are protected by mmap_sem and/or the reverse map
+ * semaphores. Notifier chains are only changed when all reverse maps and
+ * the mmap_sem locks are taken.
+ *
+ * Therefore notifier chains can only be traversed when either
+ *
+ * 1. mmap_sem is held.
+ * 2. One of the reverse map locks is held (i_mmap_lock or anon_vma->lock).
+ * 3. No other concurrent thread can access the list (release)
+ */
+struct mmu_notifier {
+	struct hlist_node hlist;
+	const struct mmu_notifier_ops *ops;
+};
+
+static inline int mm_has_notifiers(struct mm_struct *mm)
+{
+	return unlikely(mm->mmu_notifier_mm);
+}
+
+extern int mmu_notifier_register(struct mmu_notifier *mn,
+				 struct mm_struct *mm);
+extern int __mmu_notifier_register(struct mmu_notifier *mn,
+				   struct mm_struct *mm);
+extern void mmu_notifier_unregister(struct mmu_notifier *mn,
+				    struct mm_struct *mm);
+extern void __mmu_notifier_mm_destroy(struct mm_struct *mm);
+extern void __mmu_notifier_release(struct mm_struct *mm);
+extern int __mmu_notifier_clear_flush_young(struct mm_struct *mm,
+					  unsigned long address);
+extern void __mmu_notifier_invalidate_page(struct mm_struct *mm,
+					  unsigned long address);
+extern void __mmu_notifier_invalidate_range_start(struct mm_struct *mm,
+				  unsigned long start, unsigned long end);
+extern void __mmu_notifier_invalidate_range_end(struct mm_struct *mm,
+				  unsigned long start, unsigned long end);
+
+static inline void mmu_notifier_release(struct mm_struct *mm)
+{
+	if (mm_has_notifiers(mm))
+		__mmu_notifier_release(mm);
+}
+
+static inline int mmu_notifier_clear_flush_young(struct mm_struct *mm,
+					  unsigned long address)
+{
+	if (mm_has_notifiers(mm))
+		return __mmu_notifier_clear_flush_young(mm, address);
+	return 0;
+}
+
+static inline void mmu_notifier_invalidate_page(struct mm_struct *mm,
+					  unsigned long address)
+{
+	if (mm_has_notifiers(mm))
+		__mmu_notifier_invalidate_page(mm, address);
+}
+
+static inline void mmu_notifier_invalidate_range_start(struct mm_struct *mm,
+				  unsigned long start, unsigned long end)
+{
+	if (mm_has_notifiers(mm))
+		__mmu_notifier_invalidate_range_start(mm, start, end);
+}
+
+static inline void mmu_notifier_invalidate_range_end(struct mm_struct *mm,
+				  unsigned long start, unsigned long end)
+{
+	if (mm_has_notifiers(mm))
+		__mmu_notifier_invalidate_range_end(mm, start, end);
+}
+
+static inline void mmu_notifier_mm_init(struct mm_struct *mm)
+{
+	mm->mmu_notifier_mm = NULL;
+}
+
+static inline void mmu_notifier_mm_destroy(struct mm_struct *mm)
+{
+	if (mm_has_notifiers(mm))
+		__mmu_notifier_mm_destroy(mm);
+}
+
+/*
+ * These two macros will sometime replace ptep_clear_flush.
+ * ptep_clear_flush is impleemnted as macro itself, so this also is
+ * implemented as a macro until ptep_clear_flush will converted to an
+ * inline function, to diminish the risk of compilation failure. The
+ * invalidate_page method over time can be moved outside the PT lock
+ * and these two macros can be later removed.
+ */
+#define ptep_clear_flush_notify(__vma, __address, __ptep)		\
+({									\
+	pte_t __pte;							\
+	struct vm_area_struct *___vma = __vma;				\
+	unsigned long ___address = __address;				\
+	__pte = ptep_clear_flush(___vma, ___address, __ptep);		\
+	mmu_notifier_invalidate_page(___vma->vm_mm, ___address);	\
+	__pte;								\
+})
+
+#define ptep_clear_flush_young_notify(__vma, __address, __ptep)		\
+({									\
+	int __young;							\
+	struct vm_area_struct *___vma = __vma;				\
+	unsigned long ___address = __address;				\
+	__young = ptep_clear_flush_young(___vma, ___address, __ptep);	\
+	__young |= mmu_notifier_clear_flush_young(___vma->vm_mm,	\
+						  ___address);		\
+	__young;							\
+})
+
+#else /* CONFIG_MMU_NOTIFIER */
+
+static inline void mmu_notifier_release(struct mm_struct *mm)
+{
+}
+
+static inline int mmu_notifier_clear_flush_young(struct mm_struct *mm,
+					  unsigned long address)
+{
+	return 0;
+}
+
+static inline void mmu_notifier_invalidate_page(struct mm_struct *mm,
+					  unsigned long address)
+{
+}
+
+static inline void mmu_notifier_invalidate_range_start(struct mm_struct *mm,
+				  unsigned long start, unsigned long end)
+{
+}
+
+static inline void mmu_notifier_invalidate_range_end(struct mm_struct *mm,
+				  unsigned long start, unsigned long end)
+{
+}
+
+static inline void mmu_notifier_mm_init(struct mm_struct *mm)
+{
+}
+
+static inline void mmu_notifier_mm_destroy(struct mm_struct *mm)
+{
+}
+
+#define ptep_clear_flush_young_notify ptep_clear_flush_young
+#define ptep_clear_flush_notify ptep_clear_flush
+
+#endif /* CONFIG_MMU_NOTIFIER */
+
+#endif /* _LINUX_MMU_NOTIFIER_H */
diff --git a/include/linux/mount.h b/include/linux/mount.h
index 4374d1adeb4b..30a1d63b6fb5 100644
--- a/include/linux/mount.h
+++ b/include/linux/mount.h
@@ -47,7 +47,7 @@ struct vfsmount {
 	struct list_head mnt_child;	/* and going through their mnt_child */
 	int mnt_flags;
 	/* 4 bytes hole on 64bits arches */
-	char *mnt_devname;		/* Name of device e.g. /dev/dsk/hda1 */
+	const char *mnt_devname;	/* Name of device e.g. /dev/dsk/hda1 */
 	struct list_head mnt_list;
 	struct list_head mnt_expire;	/* link in fs-specific expiry list */
 	struct list_head mnt_share;	/* circular list of shared mounts */
@@ -105,7 +105,8 @@ extern struct vfsmount *vfs_kern_mount(struct file_system_type *type,
 
 struct nameidata;
 
-extern int do_add_mount(struct vfsmount *newmnt, struct nameidata *nd,
+struct path;
+extern int do_add_mount(struct vfsmount *newmnt, struct path *path,
 			int mnt_flags, struct list_head *fslist);
 
 extern void mark_mounts_for_expiry(struct list_head *mounts);
diff --git a/include/linux/mroute.h b/include/linux/mroute.h
index 07112ee9293a..8a455694d682 100644
--- a/include/linux/mroute.h
+++ b/include/linux/mroute.h
@@ -6,7 +6,6 @@
 #ifdef __KERNEL__
 #include <linux/in.h>
 #endif
-#include <linux/pim.h>
 
 /*
  *	Based on the MROUTING 3.5 defines primarily to keep
@@ -130,6 +129,7 @@ struct igmpmsg
  */
 
 #ifdef __KERNEL__
+#include <linux/pim.h>
 #include <net/sock.h>
 
 #ifdef CONFIG_IP_MROUTE
diff --git a/include/linux/mroute6.h b/include/linux/mroute6.h
index 5cf50473a10f..6f4c180179e2 100644
--- a/include/linux/mroute6.h
+++ b/include/linux/mroute6.h
@@ -115,6 +115,7 @@ struct sioc_mif_req6
 
 #ifdef __KERNEL__
 
+#include <linux/pim.h>
 #include <linux/skbuff.h>	/* for struct sk_buff_head */
 
 #ifdef CONFIG_IPV6_MROUTE
diff --git a/include/linux/msdos_fs.h b/include/linux/msdos_fs.h
index 81cd36b735b0..ba63858056c7 100644
--- a/include/linux/msdos_fs.h
+++ b/include/linux/msdos_fs.h
@@ -2,11 +2,11 @@
 #define _LINUX_MSDOS_FS_H
 
 #include <linux/magic.h>
+#include <asm/byteorder.h>
 
 /*
  * The MS-DOS filesystem constants/structures
  */
-#include <asm/byteorder.h>
 
 #define SECTOR_SIZE	512		/* sector size (bytes) */
 #define SECTOR_BITS	9		/* log2(SECTOR_SIZE) */
@@ -89,24 +89,22 @@
 #define IS_FSINFO(x)	(le32_to_cpu((x)->signature1) == FAT_FSINFO_SIG1 \
 			 && le32_to_cpu((x)->signature2) == FAT_FSINFO_SIG2)
 
+struct __fat_dirent {
+	long		d_ino;
+	__kernel_off_t	d_off;
+	unsigned short	d_reclen;
+	char		d_name[256]; /* We must not include limits.h! */
+};
+
 /*
  * ioctl commands
  */
-#define VFAT_IOCTL_READDIR_BOTH		_IOR('r', 1, struct dirent [2])
-#define VFAT_IOCTL_READDIR_SHORT	_IOR('r', 2, struct dirent [2])
+#define VFAT_IOCTL_READDIR_BOTH		_IOR('r', 1, struct __fat_dirent[2])
+#define VFAT_IOCTL_READDIR_SHORT	_IOR('r', 2, struct __fat_dirent[2])
 /* <linux/videotext.h> has used 0x72 ('r') in collision, so skip a few */
 #define FAT_IOCTL_GET_ATTRIBUTES	_IOR('r', 0x10, __u32)
 #define FAT_IOCTL_SET_ATTRIBUTES	_IOW('r', 0x11, __u32)
 
-/*
- * vfat shortname flags
- */
-#define VFAT_SFN_DISPLAY_LOWER	0x0001 /* convert to lowercase for display */
-#define VFAT_SFN_DISPLAY_WIN95	0x0002 /* emulate win95 rule for display */
-#define VFAT_SFN_DISPLAY_WINNT	0x0004 /* emulate winnt rule for display */
-#define VFAT_SFN_CREATE_WIN95	0x0100 /* emulate win95 rule for create */
-#define VFAT_SFN_CREATE_WINNT	0x0200 /* emulate winnt rule for create */
-
 struct fat_boot_sector {
 	__u8	ignored[3];	/* Boot strap short or near jump */
 	__u8	system_id[8];	/* Name - can be used to special case
@@ -168,14 +166,6 @@ struct msdos_dir_slot {
 	__u8    name11_12[4];	/* last 2 characters in name */
 };
 
-struct fat_slot_info {
-	loff_t i_pos;		/* on-disk position of directory entry */
-	loff_t slot_off;	/* offset for slot or de start */
-	int nr_slots;		/* number of slots + 1(de) in filename */
-	struct msdos_dir_entry *de;
-	struct buffer_head *bh;
-};
-
 #ifdef __KERNEL__
 
 #include <linux/buffer_head.h>
@@ -184,6 +174,15 @@ struct fat_slot_info {
 #include <linux/fs.h>
 #include <linux/mutex.h>
 
+/*
+ * vfat shortname flags
+ */
+#define VFAT_SFN_DISPLAY_LOWER	0x0001 /* convert to lowercase for display */
+#define VFAT_SFN_DISPLAY_WIN95	0x0002 /* emulate win95 rule for display */
+#define VFAT_SFN_DISPLAY_WINNT	0x0004 /* emulate winnt rule for display */
+#define VFAT_SFN_CREATE_WIN95	0x0100 /* emulate win95 rule for create */
+#define VFAT_SFN_CREATE_WINNT	0x0200 /* emulate winnt rule for create */
+
 struct fat_mount_options {
 	uid_t fs_uid;
 	gid_t fs_gid;
@@ -202,10 +201,10 @@ struct fat_mount_options {
 		 utf8:1,	  /* Use of UTF-8 character set (Default) */
 		 unicode_xlate:1, /* create escape sequences for unhandled Unicode */
 		 numtail:1,       /* Does first alias have a numeric '~1' type tail? */
-		 atari:1,         /* Use Atari GEMDOS variation of MS-DOS fs */
 		 flush:1,	  /* write things quickly */
 		 nocase:1,	  /* Does this need case conversion? 0=need case conversion*/
-		 usefree:1;	  /* Use free_clusters for FAT32 */
+		 usefree:1,	  /* Use free_clusters for FAT32 */
+		 tz_utc:1;	  /* Filesystem timestamps are in UTC */
 };
 
 #define FAT_HASH_BITS	8
@@ -267,6 +266,14 @@ struct msdos_inode_info {
 	struct inode vfs_inode;
 };
 
+struct fat_slot_info {
+	loff_t i_pos;		/* on-disk position of directory entry */
+	loff_t slot_off;	/* offset for slot or de start */
+	int nr_slots;		/* number of slots + 1(de) in filename */
+	struct msdos_dir_entry *de;
+	struct buffer_head *bh;
+};
+
 static inline struct msdos_sb_info *MSDOS_SB(struct super_block *sb)
 {
 	return sb->s_fs_info;
@@ -428,8 +435,9 @@ extern int fat_flush_inodes(struct super_block *sb, struct inode *i1,
 extern void fat_fs_panic(struct super_block *s, const char *fmt, ...);
 extern void fat_clusters_flush(struct super_block *sb);
 extern int fat_chain_add(struct inode *inode, int new_dclus, int nr_cluster);
-extern int date_dos2unix(unsigned short time, unsigned short date);
-extern void fat_date_unix2dos(int unix_date, __le16 *time, __le16 *date);
+extern int date_dos2unix(unsigned short time, unsigned short date, int tz_utc);
+extern void fat_date_unix2dos(int unix_date, __le16 *time, __le16 *date,
+			      int tz_utc);
 extern int fat_sync_bhs(struct buffer_head **bhs, int nr_bhs);
 
 int fat_cache_init(void);
diff --git a/include/linux/mtd/blktrans.h b/include/linux/mtd/blktrans.h
index 9a6e2f953cba..310e61606415 100644
--- a/include/linux/mtd/blktrans.h
+++ b/include/linux/mtd/blktrans.h
@@ -1,6 +1,4 @@
 /*
- * $Id: blktrans.h,v 1.6 2005/11/07 11:14:54 gleixner Exp $
- *
  * (C) 2003 David Woodhouse <dwmw2@infradead.org>
  *
  * Interface to Linux block layer for MTD 'translation layers'.
diff --git a/include/linux/mtd/cfi.h b/include/linux/mtd/cfi.h
index b0ddf4b25862..d6fb115f5a07 100644
--- a/include/linux/mtd/cfi.h
+++ b/include/linux/mtd/cfi.h
@@ -1,7 +1,6 @@
 
 /* Common Flash Interface structures
  * See http://support.intel.com/design/flash/technote/index.htm
- * $Id: cfi.h,v 1.57 2005/11/15 23:28:17 tpoynor Exp $
  */
 
 #ifndef __MTD_CFI_H__
diff --git a/include/linux/mtd/cfi_endian.h b/include/linux/mtd/cfi_endian.h
index 25724f7d3867..d802f7736be3 100644
--- a/include/linux/mtd/cfi_endian.h
+++ b/include/linux/mtd/cfi_endian.h
@@ -1,8 +1,3 @@
-/*
- * $Id: cfi_endian.h,v 1.11 2002/01/30 23:20:48 awozniak Exp $
- *
- */
-
 #include <asm/byteorder.h>
 
 #ifndef CONFIG_MTD_CFI_ADV_OPTIONS
diff --git a/include/linux/mtd/concat.h b/include/linux/mtd/concat.h
index ed8dc6755219..c02f3d264ecf 100644
--- a/include/linux/mtd/concat.h
+++ b/include/linux/mtd/concat.h
@@ -4,8 +4,6 @@
  * (C) 2002 Robert Kaiser <rkaiser@sysgo.de>
  *
  * This code is GPL
- *
- * $Id: concat.h,v 1.1 2002/03/08 16:34:36 rkaiser Exp $
  */
 
 #ifndef MTD_CONCAT_H
diff --git a/include/linux/mtd/doc2000.h b/include/linux/mtd/doc2000.h
index 9addd073bf15..0a6d516ab71d 100644
--- a/include/linux/mtd/doc2000.h
+++ b/include/linux/mtd/doc2000.h
@@ -6,8 +6,6 @@
  * Copyright (C) 2002-2003 Greg Ungerer <gerg@snapgear.com>
  * Copyright (C) 2002-2003 SnapGear Inc
  *
- * $Id: doc2000.h,v 1.25 2005/11/07 11:14:54 gleixner Exp $
- *
  * Released under GPL
  */
 
diff --git a/include/linux/mtd/flashchip.h b/include/linux/mtd/flashchip.h
index 39e7d2a1be9a..08dd131301c1 100644
--- a/include/linux/mtd/flashchip.h
+++ b/include/linux/mtd/flashchip.h
@@ -5,9 +5,6 @@
  * Contains information about the location and state of a given flash device
  *
  * (C) 2000 Red Hat. GPLd.
- *
- * $Id: flashchip.h,v 1.18 2005/11/07 11:14:54 gleixner Exp $
- *
  */
 
 #ifndef __MTD_FLASHCHIP_H__
diff --git a/include/linux/mtd/ftl.h b/include/linux/mtd/ftl.h
index d99609113307..0be442f881dd 100644
--- a/include/linux/mtd/ftl.h
+++ b/include/linux/mtd/ftl.h
@@ -1,6 +1,4 @@
 /*
- * $Id: ftl.h,v 1.7 2005/11/07 11:14:54 gleixner Exp $
- *
  * Derived from (and probably identical to):
  * ftl.h 1.7 1999/10/25 20:23:17
  *
diff --git a/include/linux/mtd/gen_probe.h b/include/linux/mtd/gen_probe.h
index 256e7342ed1e..df362ddf2949 100644
--- a/include/linux/mtd/gen_probe.h
+++ b/include/linux/mtd/gen_probe.h
@@ -1,7 +1,6 @@
 /*
  * (C) 2001, 2001 Red Hat, Inc.
  * GPL'd
- * $Id: gen_probe.h,v 1.4 2005/11/07 11:14:54 gleixner Exp $
  */
 
 #ifndef __LINUX_MTD_GEN_PROBE_H__
diff --git a/include/linux/mtd/inftl.h b/include/linux/mtd/inftl.h
index 85fd041d44ad..64ee53ce95a9 100644
--- a/include/linux/mtd/inftl.h
+++ b/include/linux/mtd/inftl.h
@@ -2,8 +2,6 @@
  *	inftl.h -- defines to support the Inverse NAND Flash Translation Layer
  *
  *	(C) Copyright 2002, Greg Ungerer (gerg@snapgear.com)
- *
- *	$Id: inftl.h,v 1.7 2005/06/13 13:08:45 sean Exp $
  */
 
 #ifndef __MTD_INFTL_H__
@@ -52,8 +50,6 @@ struct INFTLrecord {
 int INFTL_mount(struct INFTLrecord *s);
 int INFTL_formatblock(struct INFTLrecord *s, int block);
 
-extern char inftlmountrev[];
-
 void INFTL_dumptables(struct INFTLrecord *s);
 void INFTL_dumpVUchains(struct INFTLrecord *s);
 
diff --git a/include/linux/mtd/map.h b/include/linux/mtd/map.h
index 9c1d95491f8b..aa30244492c6 100644
--- a/include/linux/mtd/map.h
+++ b/include/linux/mtd/map.h
@@ -1,6 +1,5 @@
 
 /* Overhauled routines for dealing with different mmap regions of flash */
-/* $Id: map.h,v 1.54 2005/11/07 11:14:54 gleixner Exp $ */
 
 #ifndef __LINUX_MTD_MAP_H__
 #define __LINUX_MTD_MAP_H__
diff --git a/include/linux/mtd/mtd.h b/include/linux/mtd/mtd.h
index 8b5d49133ec6..922636548558 100644
--- a/include/linux/mtd/mtd.h
+++ b/include/linux/mtd/mtd.h
@@ -1,6 +1,4 @@
 /*
- * $Id: mtd.h,v 1.61 2005/11/07 11:14:54 gleixner Exp $
- *
  * Copyright (C) 1999-2003 David Woodhouse <dwmw2@infradead.org> et al.
  *
  * Released under GPL
@@ -274,7 +272,11 @@ static inline void mtd_erase_callback(struct erase_info *instr)
 			printk(KERN_INFO args);		\
 	} while(0)
 #else /* CONFIG_MTD_DEBUG */
-#define DEBUG(n, args...) do { } while(0)
+#define DEBUG(n, args...)				\
+	do {						\
+		if (0)					\
+			printk(KERN_INFO args);		\
+	} while(0)
 
 #endif /* CONFIG_MTD_DEBUG */
 
diff --git a/include/linux/mtd/nand.h b/include/linux/mtd/nand.h
index 53ea3dc8b0e8..81774e5facf4 100644
--- a/include/linux/mtd/nand.h
+++ b/include/linux/mtd/nand.h
@@ -5,8 +5,6 @@
  *                     Steven J. Hill <sjhill@realitydiluted.com>
  *		       Thomas Gleixner <tglx@linutronix.de>
  *
- * $Id: nand.h,v 1.74 2005/09/15 13:58:50 vwool Exp $
- *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
@@ -179,6 +177,9 @@ typedef enum {
 #define NAND_MUST_PAD(chip) (!(chip->options & NAND_NO_PADDING))
 #define NAND_HAS_CACHEPROG(chip) ((chip->options & NAND_CACHEPRG))
 #define NAND_HAS_COPYBACK(chip) ((chip->options & NAND_COPYBACK))
+/* Large page NAND with SOFT_ECC should support subpage reads */
+#define NAND_SUBPAGE_READ(chip) ((chip->ecc.mode == NAND_ECC_SOFT) \
+					&& (chip->page_shift > 9))
 
 /* Mask to zero out the chip options, which come from the id table */
 #define NAND_CHIPOPTIONS_MSK	(0x0000ffff & ~NAND_NO_AUTOINCR)
@@ -276,6 +277,10 @@ struct nand_ecc_ctrl {
 	int			(*read_page)(struct mtd_info *mtd,
 					     struct nand_chip *chip,
 					     uint8_t *buf);
+	int			(*read_subpage)(struct mtd_info *mtd,
+					     struct nand_chip *chip,
+					     uint32_t offs, uint32_t len,
+					     uint8_t *buf);
 	void			(*write_page)(struct mtd_info *mtd,
 					      struct nand_chip *chip,
 					      const uint8_t *buf);
diff --git a/include/linux/mtd/nand_ecc.h b/include/linux/mtd/nand_ecc.h
index 12c5bc342ead..090da505425d 100644
--- a/include/linux/mtd/nand_ecc.h
+++ b/include/linux/mtd/nand_ecc.h
@@ -3,8 +3,6 @@
  *
  *  Copyright (C) 2000 Steven J. Hill (sjhill@realitydiluted.com)
  *
- * $Id: nand_ecc.h,v 1.4 2004/06/17 02:35:02 dbrown Exp $
- *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
diff --git a/include/linux/mtd/nftl.h b/include/linux/mtd/nftl.h
index 001eec50cac6..dcaf611ed748 100644
--- a/include/linux/mtd/nftl.h
+++ b/include/linux/mtd/nftl.h
@@ -1,6 +1,4 @@
 /*
- * $Id: nftl.h,v 1.16 2004/06/30 14:49:00 dbrown Exp $
- *
  * (C) 1999-2003 David Woodhouse <dwmw2@infradead.org>
  */
 
diff --git a/include/linux/mtd/partitions.h b/include/linux/mtd/partitions.h
index 7c37d7e55abc..5014f7a9f5df 100644
--- a/include/linux/mtd/partitions.h
+++ b/include/linux/mtd/partitions.h
@@ -4,8 +4,6 @@
  * (C) 2000 Nicolas Pitre <nico@cam.org>
  *
  * This code is GPL
- *
- * $Id: partitions.h,v 1.17 2005/11/07 11:14:55 gleixner Exp $
  */
 
 #ifndef MTD_PARTITIONS_H
diff --git a/include/linux/mtd/physmap.h b/include/linux/mtd/physmap.h
index 0dc07d5f3354..c8e63a5ee72e 100644
--- a/include/linux/mtd/physmap.h
+++ b/include/linux/mtd/physmap.h
@@ -2,8 +2,6 @@
  * For boards with physically mapped flash and using
  * drivers/mtd/maps/physmap.c mapping driver.
  *
- * $Id: physmap.h,v 1.4 2005/11/07 11:14:55 gleixner Exp $
- *
  * Copyright (C) 2003 MontaVista Software Inc.
  * Author: Jun Sun, jsun@mvista.com or jsun@junsun.net
  *
diff --git a/include/linux/mtd/plat-ram.h b/include/linux/mtd/plat-ram.h
index 0e37ad07bce2..e07890aff1cf 100644
--- a/include/linux/mtd/plat-ram.h
+++ b/include/linux/mtd/plat-ram.h
@@ -6,8 +6,6 @@
  *
  * Generic platform device based RAM map
  *
- * $Id: plat-ram.h,v 1.2 2005/01/24 00:37:40 bjd Exp $
- *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
diff --git a/include/linux/mtd/pmc551.h b/include/linux/mtd/pmc551.h
index 5cc070c24d88..27ad40aed19f 100644
--- a/include/linux/mtd/pmc551.h
+++ b/include/linux/mtd/pmc551.h
@@ -1,6 +1,4 @@
 /*
- * $Id: pmc551.h,v 1.6 2005/11/07 11:14:55 gleixner Exp $
- *
  * PMC551 PCI Mezzanine Ram Device
  *
  * Author:
@@ -17,7 +15,7 @@
 
 #include <linux/mtd/mtd.h>
 
-#define PMC551_VERSION "$Id: pmc551.h,v 1.6 2005/11/07 11:14:55 gleixner Exp $\n"\
+#define PMC551_VERSION \
        "Ramix PMC551 PCI Mezzanine Ram Driver. (C) 1999,2000 Nortel Networks.\n"
 
 /*
diff --git a/include/linux/mtd/ubi.h b/include/linux/mtd/ubi.h
index f71201d0f3e7..6316fafe5c2a 100644
--- a/include/linux/mtd/ubi.h
+++ b/include/linux/mtd/ubi.h
@@ -45,13 +45,13 @@ enum {
  * @size: how many physical eraseblocks are reserved for this volume
  * @used_bytes: how many bytes of data this volume contains
  * @used_ebs: how many physical eraseblocks of this volume actually contain any
- * data
+ *            data
  * @vol_type: volume type (%UBI_DYNAMIC_VOLUME or %UBI_STATIC_VOLUME)
  * @corrupted: non-zero if the volume is corrupted (static volumes only)
  * @upd_marker: non-zero if the volume has update marker set
  * @alignment: volume alignment
  * @usable_leb_size: how many bytes are available in logical eraseblocks of
- * this volume
+ *                   this volume
  * @name_len: volume name length
  * @name: volume name
  * @cdev: UBI volume character device major and minor numbers
@@ -152,6 +152,7 @@ int ubi_leb_erase(struct ubi_volume_desc *desc, int lnum);
 int ubi_leb_unmap(struct ubi_volume_desc *desc, int lnum);
 int ubi_leb_map(struct ubi_volume_desc *desc, int lnum, int dtype);
 int ubi_is_mapped(struct ubi_volume_desc *desc, int lnum);
+int ubi_sync(int ubi_num);
 
 /*
  * This function is the same as the 'ubi_leb_read()' function, but it does not
diff --git a/include/linux/mtd/xip.h b/include/linux/mtd/xip.h
index e9d40bdde48c..36efcba15ecd 100644
--- a/include/linux/mtd/xip.h
+++ b/include/linux/mtd/xip.h
@@ -11,8 +11,6 @@
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
- *
- * $Id: xip.h,v 1.5 2005/11/07 11:14:55 gleixner Exp $
  */
 
 #ifndef __LINUX_MTD_XIP_H__
diff --git a/include/linux/namei.h b/include/linux/namei.h
index 24d88e98a626..68f8c3203c89 100644
--- a/include/linux/namei.h
+++ b/include/linux/namei.h
@@ -47,27 +47,24 @@ enum {LAST_NORM, LAST_ROOT, LAST_DOT, LAST_DOTDOT, LAST_BIND};
 #define LOOKUP_DIRECTORY	 2
 #define LOOKUP_CONTINUE		 4
 #define LOOKUP_PARENT		16
-#define LOOKUP_NOALT		32
 #define LOOKUP_REVAL		64
 /*
  * Intent data
  */
 #define LOOKUP_OPEN		(0x0100)
 #define LOOKUP_CREATE		(0x0200)
-#define LOOKUP_ACCESS		(0x0400)
-#define LOOKUP_CHDIR		(0x0800)
-
-extern int __user_walk(const char __user *, unsigned, struct nameidata *);
-extern int __user_walk_fd(int dfd, const char __user *, unsigned, struct nameidata *);
-#define user_path_walk(name,nd) \
-	__user_walk_fd(AT_FDCWD, name, LOOKUP_FOLLOW, nd)
-#define user_path_walk_link(name,nd) \
-	__user_walk_fd(AT_FDCWD, name, 0, nd)
+
+extern int user_path_at(int, const char __user *, unsigned, struct path *);
+
+#define user_path(name, path) user_path_at(AT_FDCWD, name, LOOKUP_FOLLOW, path)
+#define user_lpath(name, path) user_path_at(AT_FDCWD, name, 0, path)
+#define user_path_dir(name, path) \
+	user_path_at(AT_FDCWD, name, LOOKUP_FOLLOW | LOOKUP_DIRECTORY, path)
+
 extern int path_lookup(const char *, unsigned, struct nameidata *);
 extern int vfs_path_lookup(struct dentry *, struct vfsmount *,
 			   const char *, unsigned int, struct nameidata *);
 
-extern int __user_path_lookup_open(const char __user *, unsigned lookup_flags, struct nameidata *nd, int open_flags);
 extern int path_lookup_open(int dfd, const char *name, unsigned lookup_flags, struct nameidata *, int open_flags);
 extern struct file *lookup_instantiate_filp(struct nameidata *nd, struct dentry *dentry,
 		int (*open)(struct inode *, struct file *));
diff --git a/include/linux/net.h b/include/linux/net.h
index 2f999fbb188d..6dc14a240042 100644
--- a/include/linux/net.h
+++ b/include/linux/net.h
@@ -18,16 +18,9 @@
 #ifndef _LINUX_NET_H
 #define _LINUX_NET_H
 
-#include <linux/wait.h>
 #include <linux/socket.h>
-#include <linux/fcntl.h>	/* For O_CLOEXEC and O_NONBLOCK */
 #include <asm/socket.h>
 
-struct poll_table_struct;
-struct pipe_inode_info;
-struct inode;
-struct net;
-
 #define NPROTO		AF_MAX
 
 #define SYS_SOCKET	1		/* sys_socket(2)		*/
@@ -62,6 +55,13 @@ typedef enum {
 #ifdef __KERNEL__
 #include <linux/stringify.h>
 #include <linux/random.h>
+#include <linux/wait.h>
+#include <linux/fcntl.h>	/* For O_CLOEXEC and O_NONBLOCK */
+
+struct poll_table_struct;
+struct pipe_inode_info;
+struct inode;
+struct net;
 
 #define SOCK_ASYNC_NOSPACE	0
 #define SOCK_ASYNC_WAITDATA	1
@@ -351,8 +351,7 @@ static const struct proto_ops name##_ops = {			\
 
 #ifdef CONFIG_SYSCTL
 #include <linux/sysctl.h>
-extern int net_msg_cost;
-extern int net_msg_burst;
+extern struct ratelimit_state net_ratelimit_state;
 #endif
 
 #endif /* __KERNEL__ */
diff --git a/include/linux/netdevice.h b/include/linux/netdevice.h
index b4d056ceab96..488c56e649b5 100644
--- a/include/linux/netdevice.h
+++ b/include/linux/netdevice.h
@@ -61,9 +61,7 @@ struct wireless_dev;
 #define NET_XMIT_DROP		1	/* skb dropped			*/
 #define NET_XMIT_CN		2	/* congestion notification	*/
 #define NET_XMIT_POLICED	3	/* skb is shot by police	*/
-#define NET_XMIT_BYPASS		4	/* packet does not leave via dequeue;
-					   (TC use only - dev_queue_xmit
-					   returns this as NET_XMIT_SUCCESS) */
+#define NET_XMIT_MASK		0xFFFF	/* qdisc flags in net/sch_generic.h */
 
 /* Backlog congestion levels */
 #define NET_RX_SUCCESS		0   /* keep 'em coming, baby */
@@ -440,6 +438,7 @@ static inline void napi_synchronize(const struct napi_struct *n)
 enum netdev_queue_state_t
 {
 	__QUEUE_STATE_XOFF,
+	__QUEUE_STATE_FROZEN,
 };
 
 struct netdev_queue {
@@ -636,7 +635,7 @@ struct net_device
 	unsigned int		real_num_tx_queues;
 
 	unsigned long		tx_queue_len;	/* Max frames per queue allowed */
-
+	spinlock_t		tx_global_lock;
 /*
  * One part is mostly used on xmit path (device)
  */
@@ -1099,6 +1098,11 @@ static inline int netif_queue_stopped(const struct net_device *dev)
 	return netif_tx_queue_stopped(netdev_get_tx_queue(dev, 0));
 }
 
+static inline int netif_tx_queue_frozen(const struct netdev_queue *dev_queue)
+{
+	return test_bit(__QUEUE_STATE_FROZEN, &dev_queue->state);
+}
+
 /**
  *	netif_running - test if up
  *	@dev: network device
@@ -1475,6 +1479,26 @@ static inline void __netif_tx_lock_bh(struct netdev_queue *txq)
 	txq->xmit_lock_owner = smp_processor_id();
 }
 
+static inline int __netif_tx_trylock(struct netdev_queue *txq)
+{
+	int ok = spin_trylock(&txq->_xmit_lock);
+	if (likely(ok))
+		txq->xmit_lock_owner = smp_processor_id();
+	return ok;
+}
+
+static inline void __netif_tx_unlock(struct netdev_queue *txq)
+{
+	txq->xmit_lock_owner = -1;
+	spin_unlock(&txq->_xmit_lock);
+}
+
+static inline void __netif_tx_unlock_bh(struct netdev_queue *txq)
+{
+	txq->xmit_lock_owner = -1;
+	spin_unlock_bh(&txq->_xmit_lock);
+}
+
 /**
  *	netif_tx_lock - grab network device transmit lock
  *	@dev: network device
@@ -1484,12 +1508,23 @@ static inline void __netif_tx_lock_bh(struct netdev_queue *txq)
  */
 static inline void netif_tx_lock(struct net_device *dev)
 {
-	int cpu = smp_processor_id();
 	unsigned int i;
+	int cpu;
 
+	spin_lock(&dev->tx_global_lock);
+	cpu = smp_processor_id();
 	for (i = 0; i < dev->num_tx_queues; i++) {
 		struct netdev_queue *txq = netdev_get_tx_queue(dev, i);
+
+		/* We are the only thread of execution doing a
+		 * freeze, but we have to grab the _xmit_lock in
+		 * order to synchronize with threads which are in
+		 * the ->hard_start_xmit() handler and already
+		 * checked the frozen bit.
+		 */
 		__netif_tx_lock(txq, cpu);
+		set_bit(__QUEUE_STATE_FROZEN, &txq->state);
+		__netif_tx_unlock(txq);
 	}
 }
 
@@ -1499,40 +1534,22 @@ static inline void netif_tx_lock_bh(struct net_device *dev)
 	netif_tx_lock(dev);
 }
 
-static inline int __netif_tx_trylock(struct netdev_queue *txq)
-{
-	int ok = spin_trylock(&txq->_xmit_lock);
-	if (likely(ok))
-		txq->xmit_lock_owner = smp_processor_id();
-	return ok;
-}
-
-static inline int netif_tx_trylock(struct net_device *dev)
-{
-	return __netif_tx_trylock(netdev_get_tx_queue(dev, 0));
-}
-
-static inline void __netif_tx_unlock(struct netdev_queue *txq)
-{
-	txq->xmit_lock_owner = -1;
-	spin_unlock(&txq->_xmit_lock);
-}
-
-static inline void __netif_tx_unlock_bh(struct netdev_queue *txq)
-{
-	txq->xmit_lock_owner = -1;
-	spin_unlock_bh(&txq->_xmit_lock);
-}
-
 static inline void netif_tx_unlock(struct net_device *dev)
 {
 	unsigned int i;
 
 	for (i = 0; i < dev->num_tx_queues; i++) {
 		struct netdev_queue *txq = netdev_get_tx_queue(dev, i);
-		__netif_tx_unlock(txq);
-	}
 
+		/* No need to grab the _xmit_lock here.  If the
+		 * queue is not stopped for another reason, we
+		 * force a schedule.
+		 */
+		clear_bit(__QUEUE_STATE_FROZEN, &txq->state);
+		if (!test_bit(__QUEUE_STATE_XOFF, &txq->state))
+			__netif_schedule(txq->qdisc);
+	}
+	spin_unlock(&dev->tx_global_lock);
 }
 
 static inline void netif_tx_unlock_bh(struct net_device *dev)
@@ -1556,13 +1573,18 @@ static inline void netif_tx_unlock_bh(struct net_device *dev)
 static inline void netif_tx_disable(struct net_device *dev)
 {
 	unsigned int i;
+	int cpu;
 
-	netif_tx_lock_bh(dev);
+	local_bh_disable();
+	cpu = smp_processor_id();
 	for (i = 0; i < dev->num_tx_queues; i++) {
 		struct netdev_queue *txq = netdev_get_tx_queue(dev, i);
+
+		__netif_tx_lock(txq, cpu);
 		netif_tx_stop_queue(txq);
+		__netif_tx_unlock(txq);
 	}
-	netif_tx_unlock_bh(dev);
+	local_bh_enable();
 }
 
 static inline void netif_addr_lock(struct net_device *dev)
diff --git a/include/linux/netfilter/nf_conntrack_tcp.h b/include/linux/netfilter/nf_conntrack_tcp.h
index 22ce29995f13..a049df4f2236 100644
--- a/include/linux/netfilter/nf_conntrack_tcp.h
+++ b/include/linux/netfilter/nf_conntrack_tcp.h
@@ -30,6 +30,9 @@ enum tcp_conntrack {
 /* Be liberal in window checking */
 #define IP_CT_TCP_FLAG_BE_LIBERAL		0x08
 
+/* Has unacknowledged data */
+#define IP_CT_TCP_FLAG_DATA_UNACKNOWLEDGED	0x10
+
 struct nf_ct_tcp_flags {
 	u_int8_t flags;
 	u_int8_t mask;
diff --git a/include/linux/nfs_fs.h b/include/linux/nfs_fs.h
index 29d261918734..78a5922a2f11 100644
--- a/include/linux/nfs_fs.h
+++ b/include/linux/nfs_fs.h
@@ -42,7 +42,6 @@
 #include <linux/in.h>
 #include <linux/kref.h>
 #include <linux/mm.h>
-#include <linux/namei.h>
 #include <linux/pagemap.h>
 #include <linux/rbtree.h>
 #include <linux/rwsem.h>
@@ -332,7 +331,7 @@ extern int nfs_refresh_inode(struct inode *, struct nfs_fattr *);
 extern int nfs_post_op_update_inode(struct inode *inode, struct nfs_fattr *fattr);
 extern int nfs_post_op_update_inode_force_wcc(struct inode *inode, struct nfs_fattr *fattr);
 extern int nfs_getattr(struct vfsmount *, struct dentry *, struct kstat *);
-extern int nfs_permission(struct inode *, int, struct nameidata *);
+extern int nfs_permission(struct inode *, int);
 extern int nfs_open(struct inode *, struct file *);
 extern int nfs_release(struct inode *, struct file *);
 extern int nfs_attribute_timeout(struct inode *inode);
diff --git a/include/linux/nfsd/nfsd.h b/include/linux/nfsd/nfsd.h
index a2861d95ecc3..108f47e5fd95 100644
--- a/include/linux/nfsd/nfsd.h
+++ b/include/linux/nfsd/nfsd.h
@@ -12,7 +12,6 @@
 
 #include <linux/types.h>
 #include <linux/unistd.h>
-#include <linux/dirent.h>
 #include <linux/fs.h>
 #include <linux/posix_acl.h>
 #include <linux/mount.h>
diff --git a/include/linux/notifier.h b/include/linux/notifier.h
index bd3d72ddf333..da2698b0fdd1 100644
--- a/include/linux/notifier.h
+++ b/include/linux/notifier.h
@@ -214,6 +214,8 @@ static inline int notifier_to_errno(int ret)
 #define CPU_DEAD		0x0007 /* CPU (unsigned)v dead */
 #define CPU_DYING		0x0008 /* CPU (unsigned)v not running any task,
 				        * not handling interrupts, soon dead */
+#define CPU_POST_DEAD		0x0009 /* CPU (unsigned)v dead, cpu_hotplug
+					* lock is dropped */
 
 /* Used for CPU hotplug events occuring while tasks are frozen due to a suspend
  * operation in progress
diff --git a/include/linux/nsproxy.h b/include/linux/nsproxy.h
index 0e66b57631fc..c8a768e59640 100644
--- a/include/linux/nsproxy.h
+++ b/include/linux/nsproxy.h
@@ -82,9 +82,12 @@ static inline void get_nsproxy(struct nsproxy *ns)
 }
 
 #ifdef CONFIG_CGROUP_NS
-int ns_cgroup_clone(struct task_struct *tsk);
+int ns_cgroup_clone(struct task_struct *tsk, struct pid *pid);
 #else
-static inline int ns_cgroup_clone(struct task_struct *tsk) { return 0; }
+static inline int ns_cgroup_clone(struct task_struct *tsk, struct pid *pid)
+{
+	return 0;
+}
 #endif
 
 #endif
diff --git a/include/linux/of.h b/include/linux/of.h
index 59a61bdc98b6..79886ade070f 100644
--- a/include/linux/of.h
+++ b/include/linux/of.h
@@ -70,5 +70,6 @@ extern int of_n_addr_cells(struct device_node *np);
 extern int of_n_size_cells(struct device_node *np);
 extern const struct of_device_id *of_match_node(
 	const struct of_device_id *matches, const struct device_node *node);
+extern int of_modalias_node(struct device_node *node, char *modalias, int len);
 
 #endif /* _LINUX_OF_H */
diff --git a/include/linux/of_spi.h b/include/linux/of_spi.h
new file mode 100644
index 000000000000..5f71ee8c0868
--- /dev/null
+++ b/include/linux/of_spi.h
@@ -0,0 +1,18 @@
+/*
+ * OpenFirmware SPI support routines
+ * Copyright (C) 2008 Secret Lab Technologies Ltd.
+ *
+ * Support routines for deriving SPI device attachments from the device
+ * tree.
+ */
+
+#ifndef __LINUX_OF_SPI_H
+#define __LINUX_OF_SPI_H
+
+#include <linux/of.h>
+#include <linux/spi/spi.h>
+
+extern void of_register_spi_devices(struct spi_master *master,
+				    struct device_node *np);
+
+#endif /* __LINUX_OF_SPI */
diff --git a/include/linux/page-flags.h b/include/linux/page-flags.h
index 54590a9a103e..c74d3e875314 100644
--- a/include/linux/page-flags.h
+++ b/include/linux/page-flags.h
@@ -163,7 +163,7 @@ static inline int Page##uname(struct page *page) 			\
 
 struct page;	/* forward declaration */
 
-PAGEFLAG(Locked, locked) TESTSCFLAG(Locked, locked)
+TESTPAGEFLAG(Locked, locked)
 PAGEFLAG(Error, error)
 PAGEFLAG(Referenced, referenced) TESTCLEARFLAG(Referenced, referenced)
 PAGEFLAG(Dirty, dirty) TESTSCFLAG(Dirty, dirty) __CLEARPAGEFLAG(Dirty, dirty)
@@ -239,9 +239,6 @@ static inline void __SetPageUptodate(struct page *page)
 {
 	smp_wmb();
 	__set_bit(PG_uptodate, &(page)->flags);
-#ifdef CONFIG_S390
-	page_clear_dirty(page);
-#endif
 }
 
 static inline void SetPageUptodate(struct page *page)
diff --git a/include/linux/pagemap.h b/include/linux/pagemap.h
index ee1ec2c7723c..5da31c12101c 100644
--- a/include/linux/pagemap.h
+++ b/include/linux/pagemap.h
@@ -12,6 +12,7 @@
 #include <asm/uaccess.h>
 #include <linux/gfp.h>
 #include <linux/bitops.h>
+#include <linux/hardirq.h> /* for in_interrupt() */
 
 /*
  * Bits in mapping->flags.  The lower __GFP_BITS_SHIFT bits are the page
@@ -19,6 +20,7 @@
  */
 #define	AS_EIO		(__GFP_BITS_SHIFT + 0)	/* IO error on async write */
 #define AS_ENOSPC	(__GFP_BITS_SHIFT + 1)	/* ENOSPC on async write */
+#define AS_MM_ALL_LOCKS	(__GFP_BITS_SHIFT + 2)	/* under mm_take_all_locks() */
 
 static inline void mapping_set_error(struct address_space *mapping, int error)
 {
@@ -62,6 +64,121 @@ static inline void mapping_set_gfp_mask(struct address_space *m, gfp_t mask)
 #define page_cache_release(page)	put_page(page)
 void release_pages(struct page **pages, int nr, int cold);
 
+/*
+ * speculatively take a reference to a page.
+ * If the page is free (_count == 0), then _count is untouched, and 0
+ * is returned. Otherwise, _count is incremented by 1 and 1 is returned.
+ *
+ * This function must be called inside the same rcu_read_lock() section as has
+ * been used to lookup the page in the pagecache radix-tree (or page table):
+ * this allows allocators to use a synchronize_rcu() to stabilize _count.
+ *
+ * Unless an RCU grace period has passed, the count of all pages coming out
+ * of the allocator must be considered unstable. page_count may return higher
+ * than expected, and put_page must be able to do the right thing when the
+ * page has been finished with, no matter what it is subsequently allocated
+ * for (because put_page is what is used here to drop an invalid speculative
+ * reference).
+ *
+ * This is the interesting part of the lockless pagecache (and lockless
+ * get_user_pages) locking protocol, where the lookup-side (eg. find_get_page)
+ * has the following pattern:
+ * 1. find page in radix tree
+ * 2. conditionally increment refcount
+ * 3. check the page is still in pagecache (if no, goto 1)
+ *
+ * Remove-side that cares about stability of _count (eg. reclaim) has the
+ * following (with tree_lock held for write):
+ * A. atomically check refcount is correct and set it to 0 (atomic_cmpxchg)
+ * B. remove page from pagecache
+ * C. free the page
+ *
+ * There are 2 critical interleavings that matter:
+ * - 2 runs before A: in this case, A sees elevated refcount and bails out
+ * - A runs before 2: in this case, 2 sees zero refcount and retries;
+ *   subsequently, B will complete and 1 will find no page, causing the
+ *   lookup to return NULL.
+ *
+ * It is possible that between 1 and 2, the page is removed then the exact same
+ * page is inserted into the same position in pagecache. That's OK: the
+ * old find_get_page using tree_lock could equally have run before or after
+ * such a re-insertion, depending on order that locks are granted.
+ *
+ * Lookups racing against pagecache insertion isn't a big problem: either 1
+ * will find the page or it will not. Likewise, the old find_get_page could run
+ * either before the insertion or afterwards, depending on timing.
+ */
+static inline int page_cache_get_speculative(struct page *page)
+{
+	VM_BUG_ON(in_interrupt());
+
+#if !defined(CONFIG_SMP) && defined(CONFIG_CLASSIC_RCU)
+# ifdef CONFIG_PREEMPT
+	VM_BUG_ON(!in_atomic());
+# endif
+	/*
+	 * Preempt must be disabled here - we rely on rcu_read_lock doing
+	 * this for us.
+	 *
+	 * Pagecache won't be truncated from interrupt context, so if we have
+	 * found a page in the radix tree here, we have pinned its refcount by
+	 * disabling preempt, and hence no need for the "speculative get" that
+	 * SMP requires.
+	 */
+	VM_BUG_ON(page_count(page) == 0);
+	atomic_inc(&page->_count);
+
+#else
+	if (unlikely(!get_page_unless_zero(page))) {
+		/*
+		 * Either the page has been freed, or will be freed.
+		 * In either case, retry here and the caller should
+		 * do the right thing (see comments above).
+		 */
+		return 0;
+	}
+#endif
+	VM_BUG_ON(PageTail(page));
+
+	return 1;
+}
+
+/*
+ * Same as above, but add instead of inc (could just be merged)
+ */
+static inline int page_cache_add_speculative(struct page *page, int count)
+{
+	VM_BUG_ON(in_interrupt());
+
+#if !defined(CONFIG_SMP) && defined(CONFIG_CLASSIC_RCU)
+# ifdef CONFIG_PREEMPT
+	VM_BUG_ON(!in_atomic());
+# endif
+	VM_BUG_ON(page_count(page) == 0);
+	atomic_add(count, &page->_count);
+
+#else
+	if (unlikely(!atomic_add_unless(&page->_count, count, 0)))
+		return 0;
+#endif
+	VM_BUG_ON(PageCompound(page) && page != compound_head(page));
+
+	return 1;
+}
+
+static inline int page_freeze_refs(struct page *page, int count)
+{
+	return likely(atomic_cmpxchg(&page->_count, count, 0) == count);
+}
+
+static inline void page_unfreeze_refs(struct page *page, int count)
+{
+	VM_BUG_ON(page_count(page) != 0);
+	VM_BUG_ON(count == 0);
+
+	atomic_set(&page->_count, count);
+}
+
 #ifdef CONFIG_NUMA
 extern struct page *__page_cache_alloc(gfp_t gfp);
 #else
@@ -133,13 +250,6 @@ static inline struct page *read_mapping_page(struct address_space *mapping,
 	return read_cache_page(mapping, index, filler, data);
 }
 
-int add_to_page_cache(struct page *page, struct address_space *mapping,
-				pgoff_t index, gfp_t gfp_mask);
-int add_to_page_cache_lru(struct page *page, struct address_space *mapping,
-				pgoff_t index, gfp_t gfp_mask);
-extern void remove_from_page_cache(struct page *page);
-extern void __remove_from_page_cache(struct page *page);
-
 /*
  * Return byte-offset into filesystem object for page.
  */
@@ -161,13 +271,28 @@ extern int __lock_page_killable(struct page *page);
 extern void __lock_page_nosync(struct page *page);
 extern void unlock_page(struct page *page);
 
+static inline void set_page_locked(struct page *page)
+{
+	set_bit(PG_locked, &page->flags);
+}
+
+static inline void clear_page_locked(struct page *page)
+{
+	clear_bit(PG_locked, &page->flags);
+}
+
+static inline int trylock_page(struct page *page)
+{
+	return !test_and_set_bit(PG_locked, &page->flags);
+}
+
 /*
  * lock_page may only be called if we have the page's inode pinned.
  */
 static inline void lock_page(struct page *page)
 {
 	might_sleep();
-	if (TestSetPageLocked(page))
+	if (!trylock_page(page))
 		__lock_page(page);
 }
 
@@ -179,7 +304,7 @@ static inline void lock_page(struct page *page)
 static inline int lock_page_killable(struct page *page)
 {
 	might_sleep();
-	if (TestSetPageLocked(page))
+	if (!trylock_page(page))
 		return __lock_page_killable(page);
 	return 0;
 }
@@ -191,7 +316,7 @@ static inline int lock_page_killable(struct page *page)
 static inline void lock_page_nosync(struct page *page)
 {
 	might_sleep();
-	if (TestSetPageLocked(page))
+	if (!trylock_page(page))
 		__lock_page_nosync(page);
 }
 	
@@ -276,4 +401,27 @@ static inline int fault_in_pages_readable(const char __user *uaddr, int size)
 	return ret;
 }
 
+int add_to_page_cache_locked(struct page *page, struct address_space *mapping,
+				pgoff_t index, gfp_t gfp_mask);
+int add_to_page_cache_lru(struct page *page, struct address_space *mapping,
+				pgoff_t index, gfp_t gfp_mask);
+extern void remove_from_page_cache(struct page *page);
+extern void __remove_from_page_cache(struct page *page);
+
+/*
+ * Like add_to_page_cache_locked, but used to add newly allocated pages:
+ * the page is new, so we can just run set_page_locked() against it.
+ */
+static inline int add_to_page_cache(struct page *page,
+		struct address_space *mapping, pgoff_t offset, gfp_t gfp_mask)
+{
+	int error;
+
+	set_page_locked(page);
+	error = add_to_page_cache_locked(page, mapping, offset, gfp_mask);
+	if (unlikely(error))
+		clear_page_locked(page);
+	return error;
+}
+
 #endif /* _LINUX_PAGEMAP_H */
diff --git a/include/linux/parport.h b/include/linux/parport.h
index dcb9e01a69ca..6a0d7cdb5774 100644
--- a/include/linux/parport.h
+++ b/include/linux/parport.h
@@ -560,5 +560,8 @@ extern int parport_device_proc_unregister(struct pardevice *device);
 
 #endif /*  !CONFIG_PARPORT_NOT_PC  */
 
+extern unsigned long parport_default_timeslice;
+extern int parport_default_spintime;
+
 #endif /* __KERNEL__ */
 #endif /* _PARPORT_H_ */
diff --git a/include/linux/parser.h b/include/linux/parser.h
index cc554ca8bc78..7dcd05075756 100644
--- a/include/linux/parser.h
+++ b/include/linux/parser.h
@@ -14,7 +14,7 @@ struct match_token {
 	const char *pattern;
 };
 
-typedef const struct match_token match_table_t[];
+typedef struct match_token match_table_t[];
 
 /* Maximum number of arguments that match_token will find in a pattern */
 enum {MAX_OPT_ARGS = 3};
diff --git a/include/linux/pci-acpi.h b/include/linux/pci-acpi.h
index 3ba25065fa96..8837928fbf33 100644
--- a/include/linux/pci-acpi.h
+++ b/include/linux/pci-acpi.h
@@ -57,6 +57,15 @@ static inline acpi_status pcie_osc_support_set(u32 flags)
 {
 	return __pci_osc_support_set(flags, PCI_EXPRESS_ROOT_HID_STRING);
 }
+static inline acpi_handle acpi_find_root_bridge_handle(struct pci_dev *pdev)
+{
+	/* Find root host bridge */
+	while (pdev->bus->self)
+		pdev = pdev->bus->self;
+
+	return acpi_get_pci_rootbridge_handle(pci_domain_nr(pdev->bus),
+			pdev->bus->number);
+}
 #else
 #if !defined(AE_ERROR)
 typedef u32 		acpi_status;
@@ -66,6 +75,8 @@ static inline acpi_status pci_osc_control_set(acpi_handle handle, u32 flags)
 {return AE_ERROR;}
 static inline acpi_status pci_osc_support_set(u32 flags) {return AE_ERROR;} 
 static inline acpi_status pcie_osc_support_set(u32 flags) {return AE_ERROR;}
+static inline acpi_handle acpi_find_root_bridge_handle(struct pci_dev *pdev)
+{ return NULL; }
 #endif
 
 #endif	/* _PCI_ACPI_H_ */
diff --git a/include/linux/pci-aspm.h b/include/linux/pci-aspm.h
index a1a1e618e996..91ba0b338b47 100644
--- a/include/linux/pci-aspm.h
+++ b/include/linux/pci-aspm.h
@@ -27,6 +27,7 @@ extern void pcie_aspm_init_link_state(struct pci_dev *pdev);
 extern void pcie_aspm_exit_link_state(struct pci_dev *pdev);
 extern void pcie_aspm_pm_state_change(struct pci_dev *pdev);
 extern void pci_disable_link_state(struct pci_dev *pdev, int state);
+extern void pcie_no_aspm(void);
 #else
 static inline void pcie_aspm_init_link_state(struct pci_dev *pdev)
 {
@@ -40,6 +41,10 @@ static inline void pcie_aspm_pm_state_change(struct pci_dev *pdev)
 static inline void pci_disable_link_state(struct pci_dev *pdev, int state)
 {
 }
+
+static inline void pcie_no_aspm(void)
+{
+}
 #endif
 
 #ifdef CONFIG_PCIEASPM_DEBUG /* this depends on CONFIG_PCIEASPM */
diff --git a/include/linux/pci.h b/include/linux/pci.h
index 1d296d31abe0..c0e14008a3c2 100644
--- a/include/linux/pci.h
+++ b/include/linux/pci.h
@@ -124,6 +124,8 @@ enum pci_dev_flags {
 	 * generation too.
 	 */
 	PCI_DEV_FLAGS_MSI_INTX_DISABLE_BUG = (__force pci_dev_flags_t) 1,
+	/* Device configuration is irrevocably lost if disabled into D3 */
+	PCI_DEV_FLAGS_NO_D3 = (__force pci_dev_flags_t) 2,
 };
 
 typedef unsigned short __bitwise pci_bus_flags_t;
@@ -639,6 +641,7 @@ int pci_restore_state(struct pci_dev *dev);
 int pci_set_power_state(struct pci_dev *dev, pci_power_t state);
 pci_power_t pci_choose_state(struct pci_dev *dev, pm_message_t state);
 bool pci_pme_capable(struct pci_dev *dev, pci_power_t state);
+void pci_pme_active(struct pci_dev *dev, bool enable);
 int pci_enable_wake(struct pci_dev *dev, pci_power_t state, int enable);
 pci_power_t pci_target_state(struct pci_dev *dev);
 int pci_prepare_to_sleep(struct pci_dev *dev);
@@ -678,10 +681,12 @@ void pci_enable_bridges(struct pci_bus *bus);
 /* Proper probing supporting hot-pluggable devices */
 int __must_check __pci_register_driver(struct pci_driver *, struct module *,
 				       const char *mod_name);
-static inline int __must_check pci_register_driver(struct pci_driver *driver)
-{
-	return __pci_register_driver(driver, THIS_MODULE, KBUILD_MODNAME);
-}
+
+/*
+ * pci_register_driver must be a macro so that KBUILD_MODNAME can be expanded
+ */
+#define pci_register_driver(driver)		\
+	__pci_register_driver(driver, THIS_MODULE, KBUILD_MODNAME)
 
 void pci_unregister_driver(struct pci_driver *dev);
 void pci_remove_behind_bridge(struct pci_dev *dev);
diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h
index 119ae7b8f028..f1624b396754 100644
--- a/include/linux/pci_ids.h
+++ b/include/linux/pci_ids.h
@@ -748,6 +748,7 @@
 #define PCI_VENDOR_ID_TI		0x104c
 #define PCI_DEVICE_ID_TI_TVP4020	0x3d07
 #define PCI_DEVICE_ID_TI_4450		0x8011
+#define PCI_DEVICE_ID_TI_TSB43AB22	0x8023
 #define PCI_DEVICE_ID_TI_XX21_XX11	0x8031
 #define PCI_DEVICE_ID_TI_XX21_XX11_FM	0x8033
 #define PCI_DEVICE_ID_TI_XX21_XX11_SD	0x8034
@@ -1832,7 +1833,13 @@
 #define PCI_DEVICE_ID_MOXA_C320		0x3200
 
 #define PCI_VENDOR_ID_CCD		0x1397
+#define PCI_DEVICE_ID_CCD_HFC4S		0x08B4
+#define PCI_SUBDEVICE_ID_CCD_PMX2S	0x1234
+#define PCI_DEVICE_ID_CCD_HFC8S		0x16B8
 #define PCI_DEVICE_ID_CCD_2BD0		0x2bd0
+#define PCI_DEVICE_ID_CCD_HFCE1		0x30B1
+#define PCI_SUBDEVICE_ID_CCD_SPD4S	0x3136
+#define PCI_SUBDEVICE_ID_CCD_SPDE1	0x3137
 #define PCI_DEVICE_ID_CCD_B000		0xb000
 #define PCI_DEVICE_ID_CCD_B006		0xb006
 #define PCI_DEVICE_ID_CCD_B007		0xb007
@@ -1842,8 +1849,32 @@
 #define PCI_DEVICE_ID_CCD_B00B		0xb00b
 #define PCI_DEVICE_ID_CCD_B00C		0xb00c
 #define PCI_DEVICE_ID_CCD_B100		0xb100
+#define PCI_SUBDEVICE_ID_CCD_IOB4ST	0xB520
+#define PCI_SUBDEVICE_ID_CCD_IOB8STR	0xB521
+#define PCI_SUBDEVICE_ID_CCD_IOB8ST	0xB522
+#define PCI_SUBDEVICE_ID_CCD_IOB1E1	0xB523
+#define PCI_SUBDEVICE_ID_CCD_SWYX4S	0xB540
+#define PCI_SUBDEVICE_ID_CCD_JH4S20	0xB550
+#define PCI_SUBDEVICE_ID_CCD_IOB8ST_1	0xB552
+#define PCI_SUBDEVICE_ID_CCD_BN4S	0xB560
+#define PCI_SUBDEVICE_ID_CCD_BN8S	0xB562
+#define PCI_SUBDEVICE_ID_CCD_BNE1	0xB563
+#define PCI_SUBDEVICE_ID_CCD_BNE1D	0xB564
+#define PCI_SUBDEVICE_ID_CCD_BNE1DP	0xB565
+#define PCI_SUBDEVICE_ID_CCD_BN2S	0xB566
+#define PCI_SUBDEVICE_ID_CCD_BN1SM	0xB567
+#define PCI_SUBDEVICE_ID_CCD_BN4SM	0xB568
+#define PCI_SUBDEVICE_ID_CCD_BN2SM	0xB569
+#define PCI_SUBDEVICE_ID_CCD_BNE1M	0xB56A
+#define PCI_SUBDEVICE_ID_CCD_BN8SP	0xB56B
+#define PCI_SUBDEVICE_ID_CCD_HFC4S	0xB620
+#define PCI_SUBDEVICE_ID_CCD_HFC8S	0xB622
 #define PCI_DEVICE_ID_CCD_B700		0xb700
 #define PCI_DEVICE_ID_CCD_B701		0xb701
+#define PCI_SUBDEVICE_ID_CCD_HFCE1	0xC523
+#define PCI_SUBDEVICE_ID_CCD_OV2S	0xE884
+#define PCI_SUBDEVICE_ID_CCD_OV4S	0xE888
+#define PCI_SUBDEVICE_ID_CCD_OV8S	0xE998
 
 #define PCI_VENDOR_ID_EXAR		0x13a8
 #define PCI_DEVICE_ID_EXAR_XR17C152	0x0152
@@ -2146,8 +2177,6 @@
 #define PCI_DEVICE_ID_HERC_WIN		0x5732
 #define PCI_DEVICE_ID_HERC_UNI		0x5832
 
-#define PCI_VENDOR_ID_RDC		0x17f3
-
 #define PCI_VENDOR_ID_SITECOM		0x182d
 #define PCI_DEVICE_ID_SITECOM_DC105V2	0x3069
 
@@ -2399,7 +2428,13 @@
 #define PCI_DEVICE_ID_INTEL_ICH10_3	0x3a1a
 #define PCI_DEVICE_ID_INTEL_ICH10_4	0x3a30
 #define PCI_DEVICE_ID_INTEL_ICH10_5	0x3a60
+#define PCI_DEVICE_ID_INTEL_PCH_0	0x3b10
+#define PCI_DEVICE_ID_INTEL_PCH_1	0x3b11
+#define PCI_DEVICE_ID_INTEL_PCH_2	0x3b30
 #define PCI_DEVICE_ID_INTEL_IOAT_SNB	0x402f
+#define PCI_DEVICE_ID_INTEL_5100_16	0x65f0
+#define PCI_DEVICE_ID_INTEL_5100_21	0x65f5
+#define PCI_DEVICE_ID_INTEL_5100_22	0x65f6
 #define PCI_DEVICE_ID_INTEL_5400_ERR	0x4030
 #define PCI_DEVICE_ID_INTEL_5400_FBD0	0x4035
 #define PCI_DEVICE_ID_INTEL_5400_FBD1	0x4036
@@ -2520,6 +2555,9 @@
 
 #define PCI_VENDOR_ID_3COM_2		0xa727
 
+#define PCI_VENDOR_ID_DIGIUM		0xd161
+#define PCI_DEVICE_ID_DIGIUM_HFC4S	0xb410
+
 #define PCI_SUBVENDOR_ID_EXSYS		0xd84d
 #define PCI_SUBDEVICE_ID_EXSYS_4014	0x4014
 #define PCI_SUBDEVICE_ID_EXSYS_4055	0x4055
diff --git a/include/linux/pci_regs.h b/include/linux/pci_regs.h
index 19958b929905..450684f7eaac 100644
--- a/include/linux/pci_regs.h
+++ b/include/linux/pci_regs.h
@@ -374,6 +374,7 @@
 #define  PCI_EXP_DEVCAP_ATN_BUT	0x1000	/* Attention Button Present */
 #define  PCI_EXP_DEVCAP_ATN_IND	0x2000	/* Attention Indicator Present */
 #define  PCI_EXP_DEVCAP_PWR_IND	0x4000	/* Power Indicator Present */
+#define  PCI_EXP_DEVCAP_RBER	0x8000	/* Role-Based Error Reporting */
 #define  PCI_EXP_DEVCAP_PWR_VAL	0x3fc0000 /* Slot Power Limit Value */
 #define  PCI_EXP_DEVCAP_PWR_SCL	0xc000000 /* Slot Power Limit Scale */
 #define PCI_EXP_DEVCTL		8	/* Device Control */
diff --git a/include/linux/percpu.h b/include/linux/percpu.h
index 4cdd393e71e1..9f2a3751873a 100644
--- a/include/linux/percpu.h
+++ b/include/linux/percpu.h
@@ -23,12 +23,19 @@
 	__attribute__((__section__(SHARED_ALIGNED_SECTION)))		\
 	PER_CPU_ATTRIBUTES __typeof__(type) per_cpu__##name		\
 	____cacheline_aligned_in_smp
+
+#define DEFINE_PER_CPU_PAGE_ALIGNED(type, name)			\
+	__attribute__((__section__(".data.percpu.page_aligned")))	\
+	PER_CPU_ATTRIBUTES __typeof__(type) per_cpu__##name
 #else
 #define DEFINE_PER_CPU(type, name)					\
 	PER_CPU_ATTRIBUTES __typeof__(type) per_cpu__##name
 
 #define DEFINE_PER_CPU_SHARED_ALIGNED(type, name)		      \
 	DEFINE_PER_CPU(type, name)
+
+#define DEFINE_PER_CPU_PAGE_ALIGNED(type, name)		      \
+	DEFINE_PER_CPU(type, name)
 #endif
 
 #define EXPORT_PER_CPU_SYMBOL(var) EXPORT_SYMBOL(per_cpu__##var)
@@ -74,11 +81,6 @@ struct percpu_data {
         (__typeof__(ptr))__p->ptrs[(cpu)];	          \
 })
 
-extern void *percpu_populate(void *__pdata, size_t size, gfp_t gfp, int cpu);
-extern void percpu_depopulate(void *__pdata, int cpu);
-extern int __percpu_populate_mask(void *__pdata, size_t size, gfp_t gfp,
-				  cpumask_t *mask);
-extern void __percpu_depopulate_mask(void *__pdata, cpumask_t *mask);
 extern void *__percpu_alloc_mask(size_t size, gfp_t gfp, cpumask_t *mask);
 extern void percpu_free(void *__pdata);
 
@@ -86,26 +88,6 @@ extern void percpu_free(void *__pdata);
 
 #define percpu_ptr(ptr, cpu) ({ (void)(cpu); (ptr); })
 
-static inline void percpu_depopulate(void *__pdata, int cpu)
-{
-}
-
-static inline void __percpu_depopulate_mask(void *__pdata, cpumask_t *mask)
-{
-}
-
-static inline void *percpu_populate(void *__pdata, size_t size, gfp_t gfp,
-				    int cpu)
-{
-	return percpu_ptr(__pdata, cpu);
-}
-
-static inline int __percpu_populate_mask(void *__pdata, size_t size, gfp_t gfp,
-					 cpumask_t *mask)
-{
-	return 0;
-}
-
 static __always_inline void *__percpu_alloc_mask(size_t size, gfp_t gfp, cpumask_t *mask)
 {
 	return kzalloc(size, gfp);
@@ -118,10 +100,6 @@ static inline void percpu_free(void *__pdata)
 
 #endif /* CONFIG_SMP */
 
-#define percpu_populate_mask(__pdata, size, gfp, mask) \
-	__percpu_populate_mask((__pdata), (size), (gfp), &(mask))
-#define percpu_depopulate_mask(__pdata, mask) \
-	__percpu_depopulate_mask((__pdata), &(mask))
 #define percpu_alloc_mask(size, gfp, mask) \
 	__percpu_alloc_mask((size), (gfp), &(mask))
 
diff --git a/include/linux/pid.h b/include/linux/pid.h
index c21c7e8124a7..d7e98ff8021e 100644
--- a/include/linux/pid.h
+++ b/include/linux/pid.h
@@ -48,7 +48,7 @@ enum pid_type
  */
 
 struct upid {
-	/* Try to keep pid_chain in the same cacheline as nr for find_pid */
+	/* Try to keep pid_chain in the same cacheline as nr for find_vpid */
 	int nr;
 	struct pid_namespace *ns;
 	struct hlist_node pid_chain;
@@ -57,10 +57,10 @@ struct upid {
 struct pid
 {
 	atomic_t count;
+	unsigned int level;
 	/* lists of tasks that use this pid */
 	struct hlist_head tasks[PIDTYPE_MAX];
 	struct rcu_head rcu;
-	unsigned int level;
 	struct upid numbers[1];
 };
 
@@ -105,14 +105,12 @@ extern struct pid_namespace init_pid_ns;
  * or rcu_read_lock() held.
  *
  * find_pid_ns() finds the pid in the namespace specified
- * find_pid() find the pid by its global id, i.e. in the init namespace
  * find_vpid() finr the pid by its virtual id, i.e. in the current namespace
  *
- * see also find_task_by_pid() set in include/linux/sched.h
+ * see also find_task_by_vpid() set in include/linux/sched.h
  */
 extern struct pid *find_pid_ns(int nr, struct pid_namespace *ns);
 extern struct pid *find_vpid(int nr);
-extern struct pid *find_pid(int nr);
 
 /*
  * Lookup a PID in the hash table, and return with it's count elevated.
@@ -163,4 +161,13 @@ pid_t pid_vnr(struct pid *pid);
 			}						\
 	} while (0)
 
+#define do_each_pid_thread(pid, type, task)				\
+	do_each_pid_task(pid, type, task) {				\
+		struct task_struct *tg___ = task;			\
+		do {
+
+#define while_each_pid_thread(pid, type, task)				\
+		} while_each_thread(tg___, task);			\
+		task = tg___;						\
+	} while_each_pid_task(pid, type, task)
 #endif /* _LINUX_PID_H */
diff --git a/include/linux/pid_namespace.h b/include/linux/pid_namespace.h
index caff5283d15c..1af82c4e17d4 100644
--- a/include/linux/pid_namespace.h
+++ b/include/linux/pid_namespace.h
@@ -14,6 +14,8 @@ struct pidmap {
 
 #define PIDMAP_ENTRIES         ((PID_MAX_LIMIT + 8*PAGE_SIZE - 1)/PAGE_SIZE/8)
 
+struct bsd_acct_struct;
+
 struct pid_namespace {
 	struct kref kref;
 	struct pidmap pidmap[PIDMAP_ENTRIES];
@@ -25,6 +27,9 @@ struct pid_namespace {
 #ifdef CONFIG_PROC_FS
 	struct vfsmount *proc_mnt;
 #endif
+#ifdef CONFIG_BSD_PROCESS_ACCT
+	struct bsd_acct_struct *bacct;
+#endif
 };
 
 extern struct pid_namespace init_pid_ns;
@@ -85,4 +90,7 @@ static inline struct task_struct *task_child_reaper(struct task_struct *tsk)
 	return tsk->nsproxy->pid_ns->child_reaper;
 }
 
+void pidhash_init(void);
+void pidmap_init(void);
+
 #endif /* _LINUX_PID_NS_H */
diff --git a/include/linux/pim.h b/include/linux/pim.h
index 236ffd317394..1ba0661561a4 100644
--- a/include/linux/pim.h
+++ b/include/linux/pim.h
@@ -3,22 +3,6 @@
 
 #include <asm/byteorder.h>
 
-#ifndef __KERNEL__
-struct pim {
-#if defined(__LITTLE_ENDIAN_BITFIELD)
-	__u8	pim_type:4,		/* PIM message type */
-		pim_ver:4;		/* PIM version */
-#elif defined(__BIG_ENDIAN_BITFIELD)
-	__u8	pim_ver:4;		/* PIM version */
-		pim_type:4;		/* PIM message type */
-#endif
-	__u8	pim_rsv;		/* Reserved */
-	__be16	pim_cksum;		/* Checksum */
-};
-
-#define PIM_MINLEN		8
-#endif
-
 /* Message types - V1 */
 #define PIM_V1_VERSION		__constant_htonl(0x10000000)
 #define PIM_V1_REGISTER		1
@@ -27,7 +11,6 @@ struct pim {
 #define PIM_VERSION		2
 #define PIM_REGISTER		1
 
-#if defined(__KERNEL__)
 #define PIM_NULL_REGISTER	__constant_htonl(0x40000000)
 
 /* PIMv2 register message header layout (ietf-draft-idmr-pimvsm-v2-00.ps */
@@ -42,4 +25,3 @@ struct pimreghdr
 struct sk_buff;
 extern int pim_rcv_v1(struct sk_buff *);
 #endif
-#endif
diff --git a/include/linux/pm_qos_params.h b/include/linux/pm_qos_params.h
index 2e4e97bd19f7..d74f75ed1e47 100644
--- a/include/linux/pm_qos_params.h
+++ b/include/linux/pm_qos_params.h
@@ -1,6 +1,6 @@
 /* interface for the pm_qos_power infrastructure of the linux kernel.
  *
- * Mark Gross
+ * Mark Gross <mgross@linux.intel.com>
  */
 #include <linux/list.h>
 #include <linux/notifier.h>
diff --git a/include/linux/power_supply.h b/include/linux/power_supply.h
index 68ed19ccf1f7..ea96ead1d39d 100644
--- a/include/linux/power_supply.h
+++ b/include/linux/power_supply.h
@@ -78,6 +78,7 @@ enum power_supply_property {
 	POWER_SUPPLY_PROP_CHARGE_EMPTY,
 	POWER_SUPPLY_PROP_CHARGE_NOW,
 	POWER_SUPPLY_PROP_CHARGE_AVG,
+	POWER_SUPPLY_PROP_CHARGE_COUNTER,
 	POWER_SUPPLY_PROP_ENERGY_FULL_DESIGN,
 	POWER_SUPPLY_PROP_ENERGY_EMPTY_DESIGN,
 	POWER_SUPPLY_PROP_ENERGY_FULL,
diff --git a/include/linux/proc_fs.h b/include/linux/proc_fs.h
index 15a9eaf4a802..fb61850d1cfc 100644
--- a/include/linux/proc_fs.h
+++ b/include/linux/proc_fs.h
@@ -79,6 +79,7 @@ struct proc_dir_entry {
 	int pde_users;	/* number of callers into module in progress */
 	spinlock_t pde_unload_lock; /* proc_fops checks and pde_users bumps */
 	struct completion *pde_unload_completion;
+	struct list_head pde_openers;	/* who did ->open, but not ->release */
 };
 
 struct kcore_list {
@@ -138,7 +139,6 @@ extern int proc_readdir(struct file *, void *, filldir_t);
 extern struct dentry *proc_lookup(struct inode *, struct dentry *, struct nameidata *);
 
 extern const struct file_operations proc_kcore_operations;
-extern const struct file_operations proc_kmsg_operations;
 extern const struct file_operations ppc_htab_operations;
 
 extern int pid_ns_prepare_proc(struct pid_namespace *ns);
@@ -282,11 +282,16 @@ union proc_op {
 		struct task_struct *task);
 };
 
+struct ctl_table_header;
+struct ctl_table;
+
 struct proc_inode {
 	struct pid *pid;
 	int fd;
 	union proc_op op;
 	struct proc_dir_entry *pde;
+	struct ctl_table_header *sysctl;
+	struct ctl_table *sysctl_entry;
 	struct inode vfs_inode;
 };
 
diff --git a/include/linux/profile.h b/include/linux/profile.h
index 05c1cc736937..7e7087239af5 100644
--- a/include/linux/profile.h
+++ b/include/linux/profile.h
@@ -8,8 +8,6 @@
 
 #include <asm/errno.h>
 
-extern int prof_on __read_mostly;
-
 #define CPU_PROFILING	1
 #define SCHED_PROFILING	2
 #define SLEEP_PROFILING	3
@@ -19,14 +17,31 @@ struct proc_dir_entry;
 struct pt_regs;
 struct notifier_block;
 
+#if defined(CONFIG_PROFILING) && defined(CONFIG_PROC_FS)
+void create_prof_cpu_mask(struct proc_dir_entry *de);
+#else
+static inline void create_prof_cpu_mask(struct proc_dir_entry *de)
+{
+}
+#endif
+
+enum profile_type {
+	PROFILE_TASK_EXIT,
+	PROFILE_MUNMAP
+};
+
+#ifdef CONFIG_PROFILING
+
+extern int prof_on __read_mostly;
+
 /* init basic kernel profiler */
 void __init profile_init(void);
-void profile_tick(int);
+void profile_tick(int type);
 
 /*
  * Add multiple profiler hits to a given address:
  */
-void profile_hits(int, void *ip, unsigned int nr_hits);
+void profile_hits(int type, void *ip, unsigned int nr_hits);
 
 /*
  * Single profiler hit:
@@ -40,19 +55,6 @@ static inline void profile_hit(int type, void *ip)
 		profile_hits(type, ip, 1);
 }
 
-#ifdef CONFIG_PROC_FS
-void create_prof_cpu_mask(struct proc_dir_entry *);
-#else
-#define create_prof_cpu_mask(x)			do { (void)(x); } while (0)
-#endif
-
-enum profile_type {
-	PROFILE_TASK_EXIT,
-	PROFILE_MUNMAP
-};
-
-#ifdef CONFIG_PROFILING
-
 struct task_struct;
 struct mm_struct;
 
@@ -80,6 +82,28 @@ struct pt_regs;
 
 #else
 
+#define prof_on 0
+
+static inline void profile_init(void)
+{
+	return;
+}
+
+static inline void profile_tick(int type)
+{
+	return;
+}
+
+static inline void profile_hits(int type, void *ip, unsigned int nr_hits)
+{
+	return;
+}
+
+static inline void profile_hit(int type, void *ip)
+{
+	return;
+}
+
 static inline int task_handoff_register(struct notifier_block * n)
 {
 	return -ENOSYS;
diff --git a/include/linux/ptrace.h b/include/linux/ptrace.h
index c6f5f9dd0cee..ea7416c901d1 100644
--- a/include/linux/ptrace.h
+++ b/include/linux/ptrace.h
@@ -121,6 +121,74 @@ static inline void ptrace_unlink(struct task_struct *child)
 int generic_ptrace_peekdata(struct task_struct *tsk, long addr, long data);
 int generic_ptrace_pokedata(struct task_struct *tsk, long addr, long data);
 
+/**
+ * task_ptrace - return %PT_* flags that apply to a task
+ * @task:	pointer to &task_struct in question
+ *
+ * Returns the %PT_* flags that apply to @task.
+ */
+static inline int task_ptrace(struct task_struct *task)
+{
+	return task->ptrace;
+}
+
+/**
+ * ptrace_event - possibly stop for a ptrace event notification
+ * @mask:	%PT_* bit to check in @current->ptrace
+ * @event:	%PTRACE_EVENT_* value to report if @mask is set
+ * @message:	value for %PTRACE_GETEVENTMSG to return
+ *
+ * This checks the @mask bit to see if ptrace wants stops for this event.
+ * If so we stop, reporting @event and @message to the ptrace parent.
+ *
+ * Returns nonzero if we did a ptrace notification, zero if not.
+ *
+ * Called without locks.
+ */
+static inline int ptrace_event(int mask, int event, unsigned long message)
+{
+	if (mask && likely(!(current->ptrace & mask)))
+		return 0;
+	current->ptrace_message = message;
+	ptrace_notify((event << 8) | SIGTRAP);
+	return 1;
+}
+
+/**
+ * ptrace_init_task - initialize ptrace state for a new child
+ * @child:		new child task
+ * @ptrace:		true if child should be ptrace'd by parent's tracer
+ *
+ * This is called immediately after adding @child to its parent's children
+ * list.  @ptrace is false in the normal case, and true to ptrace @child.
+ *
+ * Called with current's siglock and write_lock_irq(&tasklist_lock) held.
+ */
+static inline void ptrace_init_task(struct task_struct *child, bool ptrace)
+{
+	INIT_LIST_HEAD(&child->ptrace_entry);
+	INIT_LIST_HEAD(&child->ptraced);
+	child->parent = child->real_parent;
+	child->ptrace = 0;
+	if (unlikely(ptrace)) {
+		child->ptrace = current->ptrace;
+		ptrace_link(child, current->parent);
+	}
+}
+
+/**
+ * ptrace_release_task - final ptrace-related cleanup of a zombie being reaped
+ * @task:	task in %EXIT_DEAD state
+ *
+ * Called with write_lock(&tasklist_lock) held.
+ */
+static inline void ptrace_release_task(struct task_struct *task)
+{
+	BUG_ON(!list_empty(&task->ptraced));
+	ptrace_unlink(task);
+	BUG_ON(!list_empty(&task->ptrace_entry));
+}
+
 #ifndef force_successful_syscall_return
 /*
  * System call handlers that, upon successful completion, need to return a
@@ -246,6 +314,10 @@ static inline void user_enable_block_step(struct task_struct *task)
 #define arch_ptrace_stop(code, info)		do { } while (0)
 #endif
 
+extern int task_current_syscall(struct task_struct *target, long *callno,
+				unsigned long args[6], unsigned int maxargs,
+				unsigned long *sp, unsigned long *pc);
+
 #endif
 
 #endif
diff --git a/include/linux/quicklist.h b/include/linux/quicklist.h
index 39b66713a0bb..bd466439c588 100644
--- a/include/linux/quicklist.h
+++ b/include/linux/quicklist.h
@@ -80,6 +80,13 @@ void quicklist_trim(int nr, void (*dtor)(void *),
 
 unsigned long quicklist_total_size(void);
 
+#else
+
+static inline unsigned long quicklist_total_size(void)
+{
+	return 0;
+}
+
 #endif
 
 #endif /* LINUX_QUICKLIST_H */
diff --git a/include/linux/quota.h b/include/linux/quota.h
index dcddfb200947..376a05048bc5 100644
--- a/include/linux/quota.h
+++ b/include/linux/quota.h
@@ -41,9 +41,6 @@
 #define __DQUOT_VERSION__	"dquot_6.5.1"
 #define __DQUOT_NUM_VERSION__	6*10000+5*100+1
 
-typedef __kernel_uid32_t qid_t; /* Type in which we store ids in memory */
-typedef __u64 qsize_t;          /* Type in which we store sizes */
-
 /* Size of blocks in which are counted size limits */
 #define QUOTABLOCK_BITS 10
 #define QUOTABLOCK_SIZE (1 << QUOTABLOCK_BITS)
@@ -138,6 +135,10 @@ struct if_dqinfo {
 #define QUOTA_NL_BHARDWARN 4		/* Block hardlimit reached */
 #define QUOTA_NL_BSOFTLONGWARN 5	/* Block grace time expired */
 #define QUOTA_NL_BSOFTWARN 6		/* Block softlimit reached */
+#define QUOTA_NL_IHARDBELOW 7		/* Usage got below inode hardlimit */
+#define QUOTA_NL_ISOFTBELOW 8		/* Usage got below inode softlimit */
+#define QUOTA_NL_BHARDBELOW 9		/* Usage got below block hardlimit */
+#define QUOTA_NL_BSOFTBELOW 10		/* Usage got below block softlimit */
 
 enum {
 	QUOTA_NL_C_UNSPEC,
@@ -172,6 +173,9 @@ enum {
 
 #include <asm/atomic.h>
 
+typedef __kernel_uid32_t qid_t; /* Type in which we store ids in memory */
+typedef __u64 qsize_t;          /* Type in which we store sizes */
+
 extern spinlock_t dq_data_lock;
 
 /* Maximal numbers of writes for quota operation (insert/delete/update)
@@ -223,12 +227,10 @@ struct super_block;
 #define DQF_INFO_DIRTY (1 << DQF_INFO_DIRTY_B)	/* Is info dirty? */
 
 extern void mark_info_dirty(struct super_block *sb, int type);
-#define info_dirty(info) test_bit(DQF_INFO_DIRTY_B, &(info)->dqi_flags)
-#define info_any_dquot_dirty(info) (!list_empty(&(info)->dqi_dirty_list))
-#define info_any_dirty(info) (info_dirty(info) || info_any_dquot_dirty(info))
-
-#define sb_dqopt(sb) (&(sb)->s_dquot)
-#define sb_dqinfo(sb, type) (sb_dqopt(sb)->info+(type))
+static inline int info_dirty(struct mem_dqinfo *info)
+{
+	return test_bit(DQF_INFO_DIRTY_B, &info->dqi_flags);
+}
 
 struct dqstats {
 	int lookups;
@@ -337,19 +339,6 @@ struct quota_info {
 	struct quota_format_ops *ops[MAXQUOTAS];	/* Operations for each type */
 };
 
-#define sb_has_quota_enabled(sb, type) ((type)==USRQUOTA ? \
-	(sb_dqopt(sb)->flags & DQUOT_USR_ENABLED) : (sb_dqopt(sb)->flags & DQUOT_GRP_ENABLED))
-
-#define sb_any_quota_enabled(sb) (sb_has_quota_enabled(sb, USRQUOTA) | \
-				  sb_has_quota_enabled(sb, GRPQUOTA))
-
-#define sb_has_quota_suspended(sb, type) \
-	((type) == USRQUOTA ? (sb_dqopt(sb)->flags & DQUOT_USR_SUSPENDED) : \
-			      (sb_dqopt(sb)->flags & DQUOT_GRP_SUSPENDED))
-
-#define sb_any_quota_suspended(sb) (sb_has_quota_suspended(sb, USRQUOTA) | \
-				  sb_has_quota_suspended(sb, GRPQUOTA))
-
 int register_quota_format(struct quota_format_type *fmt);
 void unregister_quota_format(struct quota_format_type *fmt);
 
diff --git a/include/linux/quotaops.h b/include/linux/quotaops.h
index f86702053853..ca6b9b5c8d52 100644
--- a/include/linux/quotaops.h
+++ b/include/linux/quotaops.h
@@ -11,42 +11,87 @@
 #define _LINUX_QUOTAOPS_
 
 #include <linux/smp_lock.h>
-
 #include <linux/fs.h>
 
+static inline struct quota_info *sb_dqopt(struct super_block *sb)
+{
+	return &sb->s_dquot;
+}
+
 #if defined(CONFIG_QUOTA)
 
 /*
  * declaration of quota_function calls in kernel.
  */
-extern void sync_dquots(struct super_block *sb, int type);
-
-extern int dquot_initialize(struct inode *inode, int type);
-extern int dquot_drop(struct inode *inode);
-
-extern int dquot_alloc_space(struct inode *inode, qsize_t number, int prealloc);
-extern int dquot_alloc_inode(const struct inode *inode, unsigned long number);
-
-extern int dquot_free_space(struct inode *inode, qsize_t number);
-extern int dquot_free_inode(const struct inode *inode, unsigned long number);
-
-extern int dquot_transfer(struct inode *inode, struct iattr *iattr);
-extern int dquot_commit(struct dquot *dquot);
-extern int dquot_acquire(struct dquot *dquot);
-extern int dquot_release(struct dquot *dquot);
-extern int dquot_commit_info(struct super_block *sb, int type);
-extern int dquot_mark_dquot_dirty(struct dquot *dquot);
-
-extern int vfs_quota_on(struct super_block *sb, int type, int format_id,
-		char *path, int remount);
-extern int vfs_quota_on_mount(struct super_block *sb, char *qf_name,
-		int format_id, int type);
-extern int vfs_quota_off(struct super_block *sb, int type, int remount);
-extern int vfs_quota_sync(struct super_block *sb, int type);
-extern int vfs_get_dqinfo(struct super_block *sb, int type, struct if_dqinfo *ii);
-extern int vfs_set_dqinfo(struct super_block *sb, int type, struct if_dqinfo *ii);
-extern int vfs_get_dqblk(struct super_block *sb, int type, qid_t id, struct if_dqblk *di);
-extern int vfs_set_dqblk(struct super_block *sb, int type, qid_t id, struct if_dqblk *di);
+void sync_dquots(struct super_block *sb, int type);
+
+int dquot_initialize(struct inode *inode, int type);
+int dquot_drop(struct inode *inode);
+
+int dquot_alloc_space(struct inode *inode, qsize_t number, int prealloc);
+int dquot_alloc_inode(const struct inode *inode, unsigned long number);
+
+int dquot_free_space(struct inode *inode, qsize_t number);
+int dquot_free_inode(const struct inode *inode, unsigned long number);
+
+int dquot_transfer(struct inode *inode, struct iattr *iattr);
+int dquot_commit(struct dquot *dquot);
+int dquot_acquire(struct dquot *dquot);
+int dquot_release(struct dquot *dquot);
+int dquot_commit_info(struct super_block *sb, int type);
+int dquot_mark_dquot_dirty(struct dquot *dquot);
+
+int vfs_quota_on(struct super_block *sb, int type, int format_id,
+ 	char *path, int remount);
+int vfs_quota_on_path(struct super_block *sb, int type, int format_id,
+ 	struct path *path);
+int vfs_quota_on_mount(struct super_block *sb, char *qf_name,
+ 	int format_id, int type);
+int vfs_quota_off(struct super_block *sb, int type, int remount);
+int vfs_quota_sync(struct super_block *sb, int type);
+int vfs_get_dqinfo(struct super_block *sb, int type, struct if_dqinfo *ii);
+int vfs_set_dqinfo(struct super_block *sb, int type, struct if_dqinfo *ii);
+int vfs_get_dqblk(struct super_block *sb, int type, qid_t id, struct if_dqblk *di);
+int vfs_set_dqblk(struct super_block *sb, int type, qid_t id, struct if_dqblk *di);
+
+void vfs_dq_drop(struct inode *inode);
+int vfs_dq_transfer(struct inode *inode, struct iattr *iattr);
+int vfs_dq_quota_on_remount(struct super_block *sb);
+
+static inline struct mem_dqinfo *sb_dqinfo(struct super_block *sb, int type)
+{
+	return sb_dqopt(sb)->info + type;
+}
+
+/*
+ * Functions for checking status of quota
+ */
+
+static inline int sb_has_quota_enabled(struct super_block *sb, int type)
+{
+	if (type == USRQUOTA)
+		return sb_dqopt(sb)->flags & DQUOT_USR_ENABLED;
+	return sb_dqopt(sb)->flags & DQUOT_GRP_ENABLED;
+}
+
+static inline int sb_any_quota_enabled(struct super_block *sb)
+{
+	return sb_has_quota_enabled(sb, USRQUOTA) ||
+		sb_has_quota_enabled(sb, GRPQUOTA);
+}
+
+static inline int sb_has_quota_suspended(struct super_block *sb, int type)
+{
+	if (type == USRQUOTA)
+		return sb_dqopt(sb)->flags & DQUOT_USR_SUSPENDED;
+	return sb_dqopt(sb)->flags & DQUOT_GRP_SUSPENDED;
+}
+
+static inline int sb_any_quota_suspended(struct super_block *sb)
+{
+	return sb_has_quota_suspended(sb, USRQUOTA) ||
+		sb_has_quota_suspended(sb, GRPQUOTA);
+}
 
 /*
  * Operations supported for diskquotas.
@@ -59,38 +104,16 @@ extern struct quotactl_ops vfs_quotactl_ops;
 
 /* It is better to call this function outside of any transaction as it might
  * need a lot of space in journal for dquot structure allocation. */
-static inline void DQUOT_INIT(struct inode *inode)
+static inline void vfs_dq_init(struct inode *inode)
 {
 	BUG_ON(!inode->i_sb);
 	if (sb_any_quota_enabled(inode->i_sb) && !IS_NOQUOTA(inode))
 		inode->i_sb->dq_op->initialize(inode, -1);
 }
 
-/* The same as with DQUOT_INIT */
-static inline void DQUOT_DROP(struct inode *inode)
-{
-	/* Here we can get arbitrary inode from clear_inode() so we have
-	 * to be careful. OTOH we don't need locking as quota operations
-	 * are allowed to change only at mount time */
-	if (!IS_NOQUOTA(inode) && inode->i_sb && inode->i_sb->dq_op
-	    && inode->i_sb->dq_op->drop) {
-		int cnt;
-		/* Test before calling to rule out calls from proc and such
-                 * where we are not allowed to block. Note that this is
-		 * actually reliable test even without the lock - the caller
-		 * must assure that nobody can come after the DQUOT_DROP and
-		 * add quota pointers back anyway */
-		for (cnt = 0; cnt < MAXQUOTAS; cnt++)
-			if (inode->i_dquot[cnt] != NODQUOT)
-				break;
-		if (cnt < MAXQUOTAS)
-			inode->i_sb->dq_op->drop(inode);
-	}
-}
-
 /* The following allocation/freeing/transfer functions *must* be called inside
  * a transaction (deadlocks possible otherwise) */
-static inline int DQUOT_PREALLOC_SPACE_NODIRTY(struct inode *inode, qsize_t nr)
+static inline int vfs_dq_prealloc_space_nodirty(struct inode *inode, qsize_t nr)
 {
 	if (sb_any_quota_enabled(inode->i_sb)) {
 		/* Used space is updated in alloc_space() */
@@ -102,15 +125,15 @@ static inline int DQUOT_PREALLOC_SPACE_NODIRTY(struct inode *inode, qsize_t nr)
 	return 0;
 }
 
-static inline int DQUOT_PREALLOC_SPACE(struct inode *inode, qsize_t nr)
+static inline int vfs_dq_prealloc_space(struct inode *inode, qsize_t nr)
 {
 	int ret;
-        if (!(ret =  DQUOT_PREALLOC_SPACE_NODIRTY(inode, nr)))
+        if (!(ret =  vfs_dq_prealloc_space_nodirty(inode, nr)))
 		mark_inode_dirty(inode);
 	return ret;
 }
 
-static inline int DQUOT_ALLOC_SPACE_NODIRTY(struct inode *inode, qsize_t nr)
+static inline int vfs_dq_alloc_space_nodirty(struct inode *inode, qsize_t nr)
 {
 	if (sb_any_quota_enabled(inode->i_sb)) {
 		/* Used space is updated in alloc_space() */
@@ -122,25 +145,25 @@ static inline int DQUOT_ALLOC_SPACE_NODIRTY(struct inode *inode, qsize_t nr)
 	return 0;
 }
 
-static inline int DQUOT_ALLOC_SPACE(struct inode *inode, qsize_t nr)
+static inline int vfs_dq_alloc_space(struct inode *inode, qsize_t nr)
 {
 	int ret;
-	if (!(ret = DQUOT_ALLOC_SPACE_NODIRTY(inode, nr)))
+	if (!(ret = vfs_dq_alloc_space_nodirty(inode, nr)))
 		mark_inode_dirty(inode);
 	return ret;
 }
 
-static inline int DQUOT_ALLOC_INODE(struct inode *inode)
+static inline int vfs_dq_alloc_inode(struct inode *inode)
 {
 	if (sb_any_quota_enabled(inode->i_sb)) {
-		DQUOT_INIT(inode);
+		vfs_dq_init(inode);
 		if (inode->i_sb->dq_op->alloc_inode(inode, 1) == NO_QUOTA)
 			return 1;
 	}
 	return 0;
 }
 
-static inline void DQUOT_FREE_SPACE_NODIRTY(struct inode *inode, qsize_t nr)
+static inline void vfs_dq_free_space_nodirty(struct inode *inode, qsize_t nr)
 {
 	if (sb_any_quota_enabled(inode->i_sb))
 		inode->i_sb->dq_op->free_space(inode, nr);
@@ -148,35 +171,25 @@ static inline void DQUOT_FREE_SPACE_NODIRTY(struct inode *inode, qsize_t nr)
 		inode_sub_bytes(inode, nr);
 }
 
-static inline void DQUOT_FREE_SPACE(struct inode *inode, qsize_t nr)
+static inline void vfs_dq_free_space(struct inode *inode, qsize_t nr)
 {
-	DQUOT_FREE_SPACE_NODIRTY(inode, nr);
+	vfs_dq_free_space_nodirty(inode, nr);
 	mark_inode_dirty(inode);
 }
 
-static inline void DQUOT_FREE_INODE(struct inode *inode)
+static inline void vfs_dq_free_inode(struct inode *inode)
 {
 	if (sb_any_quota_enabled(inode->i_sb))
 		inode->i_sb->dq_op->free_inode(inode, 1);
 }
 
-static inline int DQUOT_TRANSFER(struct inode *inode, struct iattr *iattr)
-{
-	if (sb_any_quota_enabled(inode->i_sb) && !IS_NOQUOTA(inode)) {
-		DQUOT_INIT(inode);
-		if (inode->i_sb->dq_op->transfer(inode, iattr) == NO_QUOTA)
-			return 1;
-	}
-	return 0;
-}
-
 /* The following two functions cannot be called inside a transaction */
-static inline void DQUOT_SYNC(struct super_block *sb)
+static inline void vfs_dq_sync(struct super_block *sb)
 {
 	sync_dquots(sb, -1);
 }
 
-static inline int DQUOT_OFF(struct super_block *sb, int remount)
+static inline int vfs_dq_off(struct super_block *sb, int remount)
 {
 	int ret = -ENOSYS;
 
@@ -185,22 +198,27 @@ static inline int DQUOT_OFF(struct super_block *sb, int remount)
 	return ret;
 }
 
-static inline int DQUOT_ON_REMOUNT(struct super_block *sb)
+#else
+
+static inline int sb_has_quota_enabled(struct super_block *sb, int type)
 {
-	int cnt;
-	int ret = 0, err;
+	return 0;
+}
 
-	if (!sb->s_qcop || !sb->s_qcop->quota_on)
-		return -ENOSYS;
-	for (cnt = 0; cnt < MAXQUOTAS; cnt++) {
-		err = sb->s_qcop->quota_on(sb, cnt, 0, NULL, 1);
-		if (err < 0 && !ret)
-			ret = err;
-	}
-	return ret;
+static inline int sb_any_quota_enabled(struct super_block *sb)
+{
+	return 0;
 }
 
-#else
+static inline int sb_has_quota_suspended(struct super_block *sb, int type)
+{
+	return 0;
+}
+
+static inline int sb_any_quota_suspended(struct super_block *sb)
+{
+	return 0;
+}
 
 /*
  * NO-OP when quota not configured.
@@ -208,113 +226,144 @@ static inline int DQUOT_ON_REMOUNT(struct super_block *sb)
 #define sb_dquot_ops				(NULL)
 #define sb_quotactl_ops				(NULL)
 
-static inline void DQUOT_INIT(struct inode *inode)
+static inline void vfs_dq_init(struct inode *inode)
 {
 }
 
-static inline void DQUOT_DROP(struct inode *inode)
+static inline void vfs_dq_drop(struct inode *inode)
 {
 }
 
-static inline int DQUOT_ALLOC_INODE(struct inode *inode)
+static inline int vfs_dq_alloc_inode(struct inode *inode)
 {
 	return 0;
 }
 
-static inline void DQUOT_FREE_INODE(struct inode *inode)
+static inline void vfs_dq_free_inode(struct inode *inode)
 {
 }
 
-static inline void DQUOT_SYNC(struct super_block *sb)
+static inline void vfs_dq_sync(struct super_block *sb)
 {
 }
 
-static inline int DQUOT_OFF(struct super_block *sb, int remount)
+static inline int vfs_dq_off(struct super_block *sb, int remount)
 {
 	return 0;
 }
 
-static inline int DQUOT_ON_REMOUNT(struct super_block *sb)
+static inline int vfs_dq_quota_on_remount(struct super_block *sb)
 {
 	return 0;
 }
 
-static inline int DQUOT_TRANSFER(struct inode *inode, struct iattr *iattr)
+static inline int vfs_dq_transfer(struct inode *inode, struct iattr *iattr)
 {
 	return 0;
 }
 
-static inline int DQUOT_PREALLOC_SPACE_NODIRTY(struct inode *inode, qsize_t nr)
+static inline int vfs_dq_prealloc_space_nodirty(struct inode *inode, qsize_t nr)
 {
 	inode_add_bytes(inode, nr);
 	return 0;
 }
 
-static inline int DQUOT_PREALLOC_SPACE(struct inode *inode, qsize_t nr)
+static inline int vfs_dq_prealloc_space(struct inode *inode, qsize_t nr)
 {
-	DQUOT_PREALLOC_SPACE_NODIRTY(inode, nr);
+	vfs_dq_prealloc_space_nodirty(inode, nr);
 	mark_inode_dirty(inode);
 	return 0;
 }
 
-static inline int DQUOT_ALLOC_SPACE_NODIRTY(struct inode *inode, qsize_t nr)
+static inline int vfs_dq_alloc_space_nodirty(struct inode *inode, qsize_t nr)
 {
 	inode_add_bytes(inode, nr);
 	return 0;
 }
 
-static inline int DQUOT_ALLOC_SPACE(struct inode *inode, qsize_t nr)
+static inline int vfs_dq_alloc_space(struct inode *inode, qsize_t nr)
 {
-	DQUOT_ALLOC_SPACE_NODIRTY(inode, nr);
+	vfs_dq_alloc_space_nodirty(inode, nr);
 	mark_inode_dirty(inode);
 	return 0;
 }
 
-static inline void DQUOT_FREE_SPACE_NODIRTY(struct inode *inode, qsize_t nr)
+static inline void vfs_dq_free_space_nodirty(struct inode *inode, qsize_t nr)
 {
 	inode_sub_bytes(inode, nr);
 }
 
-static inline void DQUOT_FREE_SPACE(struct inode *inode, qsize_t nr)
+static inline void vfs_dq_free_space(struct inode *inode, qsize_t nr)
 {
-	DQUOT_FREE_SPACE_NODIRTY(inode, nr);
+	vfs_dq_free_space_nodirty(inode, nr);
 	mark_inode_dirty(inode);
 }	
 
 #endif /* CONFIG_QUOTA */
 
-static inline int DQUOT_PREALLOC_BLOCK_NODIRTY(struct inode *inode, qsize_t nr)
+static inline int vfs_dq_prealloc_block_nodirty(struct inode *inode, qsize_t nr)
 {
-	return DQUOT_PREALLOC_SPACE_NODIRTY(inode,
+	return vfs_dq_prealloc_space_nodirty(inode,
 			nr << inode->i_sb->s_blocksize_bits);
 }
 
-static inline int DQUOT_PREALLOC_BLOCK(struct inode *inode, qsize_t nr)
+static inline int vfs_dq_prealloc_block(struct inode *inode, qsize_t nr)
 {
-	return DQUOT_PREALLOC_SPACE(inode,
+	return vfs_dq_prealloc_space(inode,
 			nr << inode->i_sb->s_blocksize_bits);
 }
 
-static inline int DQUOT_ALLOC_BLOCK_NODIRTY(struct inode *inode, qsize_t nr)
+static inline int vfs_dq_alloc_block_nodirty(struct inode *inode, qsize_t nr)
 {
-	return DQUOT_ALLOC_SPACE_NODIRTY(inode,
+ 	return vfs_dq_alloc_space_nodirty(inode,
 			nr << inode->i_sb->s_blocksize_bits);
 }
 
-static inline int DQUOT_ALLOC_BLOCK(struct inode *inode, qsize_t nr)
+static inline int vfs_dq_alloc_block(struct inode *inode, qsize_t nr)
 {
-	return DQUOT_ALLOC_SPACE(inode,
+	return vfs_dq_alloc_space(inode,
 			nr << inode->i_sb->s_blocksize_bits);
 }
 
-static inline void DQUOT_FREE_BLOCK_NODIRTY(struct inode *inode, qsize_t nr)
+static inline void vfs_dq_free_block_nodirty(struct inode *inode, qsize_t nr)
 {
-	DQUOT_FREE_SPACE_NODIRTY(inode, nr << inode->i_sb->s_blocksize_bits);
+	vfs_dq_free_space_nodirty(inode, nr << inode->i_sb->s_blocksize_bits);
 }
 
-static inline void DQUOT_FREE_BLOCK(struct inode *inode, qsize_t nr)
+static inline void vfs_dq_free_block(struct inode *inode, qsize_t nr)
 {
-	DQUOT_FREE_SPACE(inode, nr << inode->i_sb->s_blocksize_bits);
+	vfs_dq_free_space(inode, nr << inode->i_sb->s_blocksize_bits);
 }
 
+/*
+ * Define uppercase equivalents for compatibility with old function names
+ * Can go away when we think all users have been converted (15/04/2008)
+ */
+#define DQUOT_INIT(inode) vfs_dq_init(inode)
+#define DQUOT_DROP(inode) vfs_dq_drop(inode)
+#define DQUOT_PREALLOC_SPACE_NODIRTY(inode, nr) \
+				vfs_dq_prealloc_space_nodirty(inode, nr)
+#define DQUOT_PREALLOC_SPACE(inode, nr) vfs_dq_prealloc_space(inode, nr)
+#define DQUOT_ALLOC_SPACE_NODIRTY(inode, nr) \
+				vfs_dq_alloc_space_nodirty(inode, nr)
+#define DQUOT_ALLOC_SPACE(inode, nr) vfs_dq_alloc_space(inode, nr)
+#define DQUOT_PREALLOC_BLOCK_NODIRTY(inode, nr) \
+				vfs_dq_prealloc_block_nodirty(inode, nr)
+#define DQUOT_PREALLOC_BLOCK(inode, nr) vfs_dq_prealloc_block(inode, nr)
+#define DQUOT_ALLOC_BLOCK_NODIRTY(inode, nr) \
+				vfs_dq_alloc_block_nodirty(inode, nr)
+#define DQUOT_ALLOC_BLOCK(inode, nr) vfs_dq_alloc_block(inode, nr)
+#define DQUOT_ALLOC_INODE(inode) vfs_dq_alloc_inode(inode)
+#define DQUOT_FREE_SPACE_NODIRTY(inode, nr) \
+				vfs_dq_free_space_nodirty(inode, nr)
+#define DQUOT_FREE_SPACE(inode, nr) vfs_dq_free_space(inode, nr)
+#define DQUOT_FREE_BLOCK_NODIRTY(inode, nr) \
+				vfs_dq_free_block_nodirty(inode, nr)
+#define DQUOT_FREE_BLOCK(inode, nr) vfs_dq_free_block(inode, nr)
+#define DQUOT_FREE_INODE(inode) vfs_dq_free_inode(inode)
+#define DQUOT_TRANSFER(inode, iattr) vfs_dq_transfer(inode, iattr)
+#define DQUOT_SYNC(sb) vfs_dq_sync(sb)
+#define DQUOT_OFF(sb, remount) vfs_dq_off(sb, remount)
+#define DQUOT_ON_REMOUNT(sb) vfs_dq_quota_on_remount(sb)
+
 #endif /* _LINUX_QUOTAOPS_ */
diff --git a/include/linux/radix-tree.h b/include/linux/radix-tree.h
index b8ce2b444bb5..a916c6660dfa 100644
--- a/include/linux/radix-tree.h
+++ b/include/linux/radix-tree.h
@@ -99,12 +99,15 @@ do {									\
  *
  * The notable exceptions to this rule are the following functions:
  * radix_tree_lookup
+ * radix_tree_lookup_slot
  * radix_tree_tag_get
  * radix_tree_gang_lookup
+ * radix_tree_gang_lookup_slot
  * radix_tree_gang_lookup_tag
+ * radix_tree_gang_lookup_tag_slot
  * radix_tree_tagged
  *
- * The first 4 functions are able to be called locklessly, using RCU. The
+ * The first 7 functions are able to be called locklessly, using RCU. The
  * caller must ensure calls to these functions are made within rcu_read_lock()
  * regions. Other readers (lock-free or otherwise) and modifications may be
  * running concurrently.
@@ -159,6 +162,9 @@ void *radix_tree_delete(struct radix_tree_root *, unsigned long);
 unsigned int
 radix_tree_gang_lookup(struct radix_tree_root *root, void **results,
 			unsigned long first_index, unsigned int max_items);
+unsigned int
+radix_tree_gang_lookup_slot(struct radix_tree_root *root, void ***results,
+			unsigned long first_index, unsigned int max_items);
 unsigned long radix_tree_next_hole(struct radix_tree_root *root,
 				unsigned long index, unsigned long max_scan);
 int radix_tree_preload(gfp_t gfp_mask);
@@ -173,6 +179,10 @@ unsigned int
 radix_tree_gang_lookup_tag(struct radix_tree_root *root, void **results,
 		unsigned long first_index, unsigned int max_items,
 		unsigned int tag);
+unsigned int
+radix_tree_gang_lookup_tag_slot(struct radix_tree_root *root, void ***results,
+		unsigned long first_index, unsigned int max_items,
+		unsigned int tag);
 int radix_tree_tagged(struct radix_tree_root *root, unsigned int tag);
 
 static inline void radix_tree_preload_end(void)
diff --git a/include/linux/raid/md_k.h b/include/linux/raid/md_k.h
index 9f2549ac0e2d..c200b9a34aff 100644
--- a/include/linux/raid/md_k.h
+++ b/include/linux/raid/md_k.h
@@ -128,6 +128,7 @@ struct mddev_s
 #define MD_CHANGE_DEVS	0	/* Some device status has changed */
 #define MD_CHANGE_CLEAN 1	/* transition to or from 'clean' */
 #define MD_CHANGE_PENDING 2	/* superblock update in progress */
+#define MD_NOTIFY_ARRAY_STATE 3	/* atomic context wants to notify userspace */
 
 	int				ro;
 
diff --git a/include/linux/ratelimit.h b/include/linux/ratelimit.h
new file mode 100644
index 000000000000..18a5b9ba9d40
--- /dev/null
+++ b/include/linux/ratelimit.h
@@ -0,0 +1,27 @@
+#ifndef _LINUX_RATELIMIT_H
+#define _LINUX_RATELIMIT_H
+#include <linux/param.h>
+
+#define DEFAULT_RATELIMIT_INTERVAL (5 * HZ)
+#define DEFAULT_RATELIMIT_BURST 10
+
+struct ratelimit_state {
+	int interval;
+	int burst;
+	int printed;
+	int missed;
+	unsigned long begin;
+};
+
+#define DEFINE_RATELIMIT_STATE(name, interval, burst)		\
+		struct ratelimit_state name = {interval, burst,}
+
+extern int __ratelimit(struct ratelimit_state *rs);
+
+static inline int ratelimit(void)
+{
+	static DEFINE_RATELIMIT_STATE(rs, DEFAULT_RATELIMIT_INTERVAL,
+					DEFAULT_RATELIMIT_BURST);
+	return __ratelimit(&rs);
+}
+#endif
diff --git a/include/linux/rcuclassic.h b/include/linux/rcuclassic.h
index 8c774905dcfe..4ab843622727 100644
--- a/include/linux/rcuclassic.h
+++ b/include/linux/rcuclassic.h
@@ -117,7 +117,7 @@ extern int rcu_needs_cpu(int cpu);
 #ifdef CONFIG_DEBUG_LOCK_ALLOC
 extern struct lockdep_map rcu_lock_map;
 # define rcu_read_acquire()	\
-			lock_acquire(&rcu_lock_map, 0, 0, 2, 1, _THIS_IP_)
+			lock_acquire(&rcu_lock_map, 0, 0, 2, 1, NULL, _THIS_IP_)
 # define rcu_read_release()	lock_release(&rcu_lock_map, 1, _THIS_IP_)
 #else
 # define rcu_read_acquire()	do { } while (0)
diff --git a/include/linux/rculist.h b/include/linux/rculist.h
index b0f39be08b6c..eb4443c7e05b 100644
--- a/include/linux/rculist.h
+++ b/include/linux/rculist.h
@@ -98,6 +98,34 @@ static inline void list_del_rcu(struct list_head *entry)
 }
 
 /**
+ * hlist_del_init_rcu - deletes entry from hash list with re-initialization
+ * @n: the element to delete from the hash list.
+ *
+ * Note: list_unhashed() on the node return true after this. It is
+ * useful for RCU based read lockfree traversal if the writer side
+ * must know if the list entry is still hashed or already unhashed.
+ *
+ * In particular, it means that we can not poison the forward pointers
+ * that may still be used for walking the hash list and we can only
+ * zero the pprev pointer so list_unhashed() will return true after
+ * this.
+ *
+ * The caller must take whatever precautions are necessary (such as
+ * holding appropriate locks) to avoid racing with another
+ * list-mutation primitive, such as hlist_add_head_rcu() or
+ * hlist_del_rcu(), running on this same list.  However, it is
+ * perfectly legal to run concurrently with the _rcu list-traversal
+ * primitives, such as hlist_for_each_entry_rcu().
+ */
+static inline void hlist_del_init_rcu(struct hlist_node *n)
+{
+	if (!hlist_unhashed(n)) {
+		__hlist_del(n);
+		n->pprev = NULL;
+	}
+}
+
+/**
  * list_replace_rcu - replace old entry by new one
  * @old : the element to be replaced
  * @new : the new element to insert
diff --git a/include/linux/rcupreempt.h b/include/linux/rcupreempt.h
index f04b64eca636..0967f03b0705 100644
--- a/include/linux/rcupreempt.h
+++ b/include/linux/rcupreempt.h
@@ -115,16 +115,21 @@ DECLARE_PER_CPU(struct rcu_dyntick_sched, rcu_dyntick_sched);
 
 static inline void rcu_enter_nohz(void)
 {
+	static DEFINE_RATELIMIT_STATE(rs, 10 * HZ, 1);
+
 	smp_mb(); /* CPUs seeing ++ must see prior RCU read-side crit sects */
 	__get_cpu_var(rcu_dyntick_sched).dynticks++;
-	WARN_ON(__get_cpu_var(rcu_dyntick_sched).dynticks & 0x1);
+	WARN_ON_RATELIMIT(__get_cpu_var(rcu_dyntick_sched).dynticks & 0x1, &rs);
 }
 
 static inline void rcu_exit_nohz(void)
 {
+	static DEFINE_RATELIMIT_STATE(rs, 10 * HZ, 1);
+
 	smp_mb(); /* CPUs seeing ++ must see later RCU read-side crit sects */
 	__get_cpu_var(rcu_dyntick_sched).dynticks++;
-	WARN_ON(!(__get_cpu_var(rcu_dyntick_sched).dynticks & 0x1));
+	WARN_ON_RATELIMIT(!(__get_cpu_var(rcu_dyntick_sched).dynticks & 0x1),
+				&rs);
 }
 
 #else /* CONFIG_NO_HZ */
diff --git a/include/linux/reboot.h b/include/linux/reboot.h
index b93b541cf111..988e55fe649b 100644
--- a/include/linux/reboot.h
+++ b/include/linux/reboot.h
@@ -59,6 +59,7 @@ extern void machine_crash_shutdown(struct pt_regs *);
  * Architecture independent implemenations of sys_reboot commands.
  */
 
+extern void kernel_restart_prepare(char *cmd);
 extern void kernel_restart(char *cmd);
 extern void kernel_halt(void);
 extern void kernel_power_off(void);
diff --git a/include/linux/regulator/bq24022.h b/include/linux/regulator/bq24022.h
new file mode 100644
index 000000000000..e84b0a9feda5
--- /dev/null
+++ b/include/linux/regulator/bq24022.h
@@ -0,0 +1,21 @@
+/*
+ * Support for TI bq24022 (bqTINY-II) Dual Input (USB/AC Adpater)
+ * 1-Cell Li-Ion Charger connected via GPIOs.
+ *
+ * Copyright (c) 2008 Philipp Zabel
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+/**
+ * bq24022_mach_info - platform data for bq24022
+ * @gpio_nce: GPIO line connected to the nCE pin, used to enable / disable charging
+ * @gpio_iset2: GPIO line connected to the ISET2 pin, used to limit charging current to 100 mA / 500 mA
+ */
+struct bq24022_mach_info {
+	int gpio_nce;
+	int gpio_iset2;
+};
diff --git a/include/linux/regulator/consumer.h b/include/linux/regulator/consumer.h
new file mode 100644
index 000000000000..afdc4558bb94
--- /dev/null
+++ b/include/linux/regulator/consumer.h
@@ -0,0 +1,284 @@
+/*
+ * consumer.h -- SoC Regulator consumer support.
+ *
+ * Copyright (C) 2007, 2008 Wolfson Microelectronics PLC.
+ *
+ * Author: Liam Girdwood <lg@opensource.wolfsonmicro.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Regulator Consumer Interface.
+ *
+ * A Power Management Regulator framework for SoC based devices.
+ * Features:-
+ *   o Voltage and current level control.
+ *   o Operating mode control.
+ *   o Regulator status.
+ *   o sysfs entries for showing client devices and status
+ *
+ * EXPERIMENTAL FEATURES:
+ *   Dynamic Regulator operating Mode Switching (DRMS) - allows regulators
+ *   to use most efficient operating mode depending upon voltage and load and
+ *   is transparent to client drivers.
+ *
+ *   e.g. Devices x,y,z share regulator r. Device x and y draw 20mA each during
+ *   IO and 1mA at idle. Device z draws 100mA when under load and 5mA when
+ *   idling. Regulator r has > 90% efficiency in NORMAL mode at loads > 100mA
+ *   but this drops rapidly to 60% when below 100mA. Regulator r has > 90%
+ *   efficiency in IDLE mode at loads < 10mA. Thus regulator r will operate
+ *   in normal mode for loads > 10mA and in IDLE mode for load <= 10mA.
+ *
+ */
+
+#ifndef __LINUX_REGULATOR_CONSUMER_H_
+#define __LINUX_REGULATOR_CONSUMER_H_
+
+/*
+ * Regulator operating modes.
+ *
+ * Regulators can run in a variety of different operating modes depending on
+ * output load. This allows further system power savings by selecting the
+ * best (and most efficient) regulator mode for a desired load.
+ *
+ * Most drivers will only care about NORMAL. The modes below are generic and
+ * will probably not match the naming convention of your regulator data sheet
+ * but should match the use cases in the datasheet.
+ *
+ * In order of power efficiency (least efficient at top).
+ *
+ *  Mode       Description
+ *  FAST       Regulator can handle fast changes in it's load.
+ *             e.g. useful in CPU voltage & frequency scaling where
+ *             load can quickly increase with CPU frequency increases.
+ *
+ *  NORMAL     Normal regulator power supply mode. Most drivers will
+ *             use this mode.
+ *
+ *  IDLE       Regulator runs in a more efficient mode for light
+ *             loads. Can be used for devices that have a low power
+ *             requirement during periods of inactivity. This mode
+ *             may be more noisy than NORMAL and may not be able
+ *             to handle fast load switching.
+ *
+ *  STANDBY    Regulator runs in the most efficient mode for very
+ *             light loads. Can be used by devices when they are
+ *             in a sleep/standby state. This mode is likely to be
+ *             the most noisy and may not be able to handle fast load
+ *             switching.
+ *
+ * NOTE: Most regulators will only support a subset of these modes. Some
+ * will only just support NORMAL.
+ *
+ * These modes can be OR'ed together to make up a mask of valid register modes.
+ */
+
+#define REGULATOR_MODE_FAST			0x1
+#define REGULATOR_MODE_NORMAL			0x2
+#define REGULATOR_MODE_IDLE			0x4
+#define REGULATOR_MODE_STANDBY			0x8
+
+/*
+ * Regulator notifier events.
+ *
+ * UNDER_VOLTAGE  Regulator output is under voltage.
+ * OVER_CURRENT   Regulator output current is too high.
+ * REGULATION_OUT Regulator output is out of regulation.
+ * FAIL           Regulator output has failed.
+ * OVER_TEMP      Regulator over temp.
+ * FORCE_DISABLE  Regulator shut down by software.
+ *
+ * NOTE: These events can be OR'ed together when passed into handler.
+ */
+
+#define REGULATOR_EVENT_UNDER_VOLTAGE		0x01
+#define REGULATOR_EVENT_OVER_CURRENT		0x02
+#define REGULATOR_EVENT_REGULATION_OUT		0x04
+#define REGULATOR_EVENT_FAIL			0x08
+#define REGULATOR_EVENT_OVER_TEMP		0x10
+#define REGULATOR_EVENT_FORCE_DISABLE		0x20
+
+struct regulator;
+
+/**
+ * struct regulator_bulk_data - Data used for bulk regulator operations.
+ *
+ * @supply   The name of the supply.  Initialised by the user before
+ *           using the bulk regulator APIs.
+ * @consumer The regulator consumer for the supply.  This will be managed
+ *           by the bulk API.
+ *
+ * The regulator APIs provide a series of regulator_bulk_() API calls as
+ * a convenience to consumers which require multiple supplies.  This
+ * structure is used to manage data for these calls.
+ */
+struct regulator_bulk_data {
+	const char *supply;
+	struct regulator *consumer;
+};
+
+#if defined(CONFIG_REGULATOR)
+
+/* regulator get and put */
+struct regulator *__must_check regulator_get(struct device *dev,
+					     const char *id);
+void regulator_put(struct regulator *regulator);
+
+/* regulator output control and status */
+int regulator_enable(struct regulator *regulator);
+int regulator_disable(struct regulator *regulator);
+int regulator_force_disable(struct regulator *regulator);
+int regulator_is_enabled(struct regulator *regulator);
+
+int regulator_bulk_get(struct device *dev, int num_consumers,
+		       struct regulator_bulk_data *consumers);
+int regulator_bulk_enable(int num_consumers,
+			  struct regulator_bulk_data *consumers);
+int regulator_bulk_disable(int num_consumers,
+			   struct regulator_bulk_data *consumers);
+void regulator_bulk_free(int num_consumers,
+			 struct regulator_bulk_data *consumers);
+
+int regulator_set_voltage(struct regulator *regulator, int min_uV, int max_uV);
+int regulator_get_voltage(struct regulator *regulator);
+int regulator_set_current_limit(struct regulator *regulator,
+			       int min_uA, int max_uA);
+int regulator_get_current_limit(struct regulator *regulator);
+
+int regulator_set_mode(struct regulator *regulator, unsigned int mode);
+unsigned int regulator_get_mode(struct regulator *regulator);
+int regulator_set_optimum_mode(struct regulator *regulator, int load_uA);
+
+/* regulator notifier block */
+int regulator_register_notifier(struct regulator *regulator,
+			      struct notifier_block *nb);
+int regulator_unregister_notifier(struct regulator *regulator,
+				struct notifier_block *nb);
+
+/* driver data - core doesn't touch */
+void *regulator_get_drvdata(struct regulator *regulator);
+void regulator_set_drvdata(struct regulator *regulator, void *data);
+
+#else
+
+/*
+ * Make sure client drivers will still build on systems with no software
+ * controllable voltage or current regulators.
+ */
+static inline struct regulator *__must_check regulator_get(struct device *dev,
+	const char *id)
+{
+	/* Nothing except the stubbed out regulator API should be
+	 * looking at the value except to check if it is an error
+	 * value so the actual return value doesn't matter.
+	 */
+	return (struct regulator *)id;
+}
+static inline void regulator_put(struct regulator *regulator)
+{
+}
+
+static inline int regulator_enable(struct regulator *regulator)
+{
+	return 0;
+}
+
+static inline int regulator_disable(struct regulator *regulator)
+{
+	return 0;
+}
+
+static inline int regulator_is_enabled(struct regulator *regulator)
+{
+	return 1;
+}
+
+static inline int regulator_bulk_get(struct device *dev,
+				     int num_consumers,
+				     struct regulator_bulk_data *consumers)
+{
+	return 0;
+}
+
+static inline int regulator_bulk_enable(int num_consumers,
+					struct regulator_bulk_data *consumers)
+{
+	return 0;
+}
+
+static inline int regulator_bulk_disable(int num_consumers,
+					 struct regulator_bulk_data *consumers)
+{
+	return 0;
+}
+
+static inline void regulator_bulk_free(int num_consumers,
+				       struct regulator_bulk_data *consumers)
+{
+}
+
+static inline int regulator_set_voltage(struct regulator *regulator,
+					int min_uV, int max_uV)
+{
+	return 0;
+}
+
+static inline int regulator_get_voltage(struct regulator *regulator)
+{
+	return 0;
+}
+
+static inline int regulator_set_current_limit(struct regulator *regulator,
+					     int min_uA, int max_uA)
+{
+	return 0;
+}
+
+static inline int regulator_get_current_limit(struct regulator *regulator)
+{
+	return 0;
+}
+
+static inline int regulator_set_mode(struct regulator *regulator,
+	unsigned int mode)
+{
+	return 0;
+}
+
+static inline unsigned int regulator_get_mode(struct regulator *regulator)
+{
+	return REGULATOR_MODE_NORMAL;
+}
+
+static inline int regulator_set_optimum_mode(struct regulator *regulator,
+					int load_uA)
+{
+	return REGULATOR_MODE_NORMAL;
+}
+
+static inline int regulator_register_notifier(struct regulator *regulator,
+			      struct notifier_block *nb)
+{
+	return 0;
+}
+
+static inline int regulator_unregister_notifier(struct regulator *regulator,
+				struct notifier_block *nb)
+{
+	return 0;
+}
+
+static inline void *regulator_get_drvdata(struct regulator *regulator)
+{
+	return NULL;
+}
+
+static inline void regulator_set_drvdata(struct regulator *regulator,
+	void *data)
+{
+}
+
+#endif
+
+#endif
diff --git a/include/linux/regulator/driver.h b/include/linux/regulator/driver.h
new file mode 100644
index 000000000000..1d712c7172a2
--- /dev/null
+++ b/include/linux/regulator/driver.h
@@ -0,0 +1,99 @@
+/*
+ * driver.h -- SoC Regulator driver support.
+ *
+ * Copyright (C) 2007, 2008 Wolfson Microelectronics PLC.
+ *
+ * Author: Liam Girdwood <lg@opensource.wolfsonmicro.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Regulator Driver Interface.
+ */
+
+#ifndef __LINUX_REGULATOR_DRIVER_H_
+#define __LINUX_REGULATOR_DRIVER_H_
+
+#include <linux/device.h>
+#include <linux/regulator/consumer.h>
+
+struct regulator_constraints;
+struct regulator_dev;
+
+/**
+ * struct regulator_ops - regulator operations.
+ *
+ * This struct describes regulator operations.
+ */
+struct regulator_ops {
+
+	/* get/set regulator voltage */
+	int (*set_voltage) (struct regulator_dev *, int min_uV, int max_uV);
+	int (*get_voltage) (struct regulator_dev *);
+
+	/* get/set regulator current  */
+	int (*set_current_limit) (struct regulator_dev *,
+				 int min_uA, int max_uA);
+	int (*get_current_limit) (struct regulator_dev *);
+
+	/* enable/disable regulator */
+	int (*enable) (struct regulator_dev *);
+	int (*disable) (struct regulator_dev *);
+	int (*is_enabled) (struct regulator_dev *);
+
+	/* get/set regulator operating mode (defined in regulator.h) */
+	int (*set_mode) (struct regulator_dev *, unsigned int mode);
+	unsigned int (*get_mode) (struct regulator_dev *);
+
+	/* get most efficient regulator operating mode for load */
+	unsigned int (*get_optimum_mode) (struct regulator_dev *, int input_uV,
+					  int output_uV, int load_uA);
+
+	/* the operations below are for configuration of regulator state when
+	 * it's parent PMIC enters a global STANBY/HIBERNATE state */
+
+	/* set regulator suspend voltage */
+	int (*set_suspend_voltage) (struct regulator_dev *, int uV);
+
+	/* enable/disable regulator in suspend state */
+	int (*set_suspend_enable) (struct regulator_dev *);
+	int (*set_suspend_disable) (struct regulator_dev *);
+
+	/* set regulator suspend operating mode (defined in regulator.h) */
+	int (*set_suspend_mode) (struct regulator_dev *, unsigned int mode);
+};
+
+/*
+ * Regulators can either control voltage or current.
+ */
+enum regulator_type {
+	REGULATOR_VOLTAGE,
+	REGULATOR_CURRENT,
+};
+
+/**
+ * struct regulator_desc - Regulator descriptor
+ *
+ */
+struct regulator_desc {
+	const char *name;
+	int id;
+	struct regulator_ops *ops;
+	int irq;
+	enum regulator_type type;
+	struct module *owner;
+};
+
+
+struct regulator_dev *regulator_register(struct regulator_desc *regulator_desc,
+					  void *reg_data);
+void regulator_unregister(struct regulator_dev *rdev);
+
+int regulator_notifier_call_chain(struct regulator_dev *rdev,
+				  unsigned long event, void *data);
+
+void *rdev_get_drvdata(struct regulator_dev *rdev);
+int rdev_get_id(struct regulator_dev *rdev);
+
+#endif
diff --git a/include/linux/regulator/fixed.h b/include/linux/regulator/fixed.h
new file mode 100644
index 000000000000..1387a5d2190e
--- /dev/null
+++ b/include/linux/regulator/fixed.h
@@ -0,0 +1,22 @@
+/*
+ * fixed.h
+ *
+ * Copyright 2008 Wolfson Microelectronics PLC.
+ *
+ * Author: Mark Brown <broonie@opensource.wolfsonmicro.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ */
+
+#ifndef __REGULATOR_FIXED_H
+#define __REGULATOR_FIXED_H
+
+struct fixed_voltage_config {
+	const char *supply_name;
+	int microvolts;
+};
+
+#endif
diff --git a/include/linux/regulator/machine.h b/include/linux/regulator/machine.h
new file mode 100644
index 000000000000..11e737dbfcf2
--- /dev/null
+++ b/include/linux/regulator/machine.h
@@ -0,0 +1,104 @@
+/*
+ * machine.h -- SoC Regulator support, machine/board driver API.
+ *
+ * Copyright (C) 2007, 2008 Wolfson Microelectronics PLC.
+ *
+ * Author: Liam Girdwood <lg@opensource.wolfsonmicro.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Regulator Machine/Board Interface.
+ */
+
+#ifndef __LINUX_REGULATOR_MACHINE_H_
+#define __LINUX_REGULATOR_MACHINE_H_
+
+#include <linux/regulator/consumer.h>
+#include <linux/suspend.h>
+
+struct regulator;
+
+/*
+ * Regulator operation constraint flags. These flags are used to enable
+ * certain regulator operations and can be OR'ed together.
+ *
+ * VOLTAGE:  Regulator output voltage can be changed by software on this
+ *           board/machine.
+ * CURRENT:  Regulator output current can be changed by software on this
+ *           board/machine.
+ * MODE:     Regulator operating mode can be changed by software on this
+ *           board/machine.
+ * STATUS:   Regulator can be enabled and disabled.
+ * DRMS:     Dynamic Regulator Mode Switching is enabled for this regulator.
+ */
+
+#define REGULATOR_CHANGE_VOLTAGE	0x1
+#define REGULATOR_CHANGE_CURRENT	0x2
+#define REGULATOR_CHANGE_MODE		0x4
+#define REGULATOR_CHANGE_STATUS		0x8
+#define REGULATOR_CHANGE_DRMS		0x10
+
+/**
+ * struct regulator_state - regulator state during low power syatem states
+ *
+ * This describes a regulators state during a system wide low power state.
+ */
+struct regulator_state {
+	int uV;	/* suspend voltage */
+	unsigned int mode; /* suspend regulator operating mode */
+	int enabled; /* is regulator enabled in this suspend state */
+};
+
+/**
+ * struct regulation_constraints - regulator operating constraints.
+ *
+ * This struct describes regulator and board/machine specific constraints.
+ */
+struct regulation_constraints {
+
+	char *name;
+
+	/* voltage output range (inclusive) - for voltage control */
+	int min_uV;
+	int max_uV;
+
+	/* current output range (inclusive) - for current control */
+	int min_uA;
+	int max_uA;
+
+	/* valid regulator operating modes for this machine */
+	unsigned int valid_modes_mask;
+
+	/* valid operations for regulator on this machine */
+	unsigned int valid_ops_mask;
+
+	/* regulator input voltage - only if supply is another regulator */
+	int input_uV;
+
+	/* regulator suspend states for global PMIC STANDBY/HIBERNATE */
+	struct regulator_state state_disk;
+	struct regulator_state state_mem;
+	struct regulator_state state_standby;
+	suspend_state_t initial_state; /* suspend state to set at init */
+
+	/* constriant flags */
+	unsigned always_on:1;	/* regulator never off when system is on */
+	unsigned boot_on:1;	/* bootloader/firmware enabled regulator */
+	unsigned apply_uV:1;	/* apply uV constraint iff min == max */
+};
+
+int regulator_set_supply(const char *regulator, const char *regulator_supply);
+
+const char *regulator_get_supply(const char *regulator);
+
+int regulator_set_machine_constraints(const char *regulator,
+	struct regulation_constraints *constraints);
+
+int regulator_set_device_supply(const char *regulator, struct device *dev,
+				const char *supply);
+
+int regulator_suspend_prepare(suspend_state_t state);
+
+#endif
diff --git a/include/linux/reiserfs_fs.h b/include/linux/reiserfs_fs.h
index 4aacaeecb56f..e9963af16cda 100644
--- a/include/linux/reiserfs_fs.h
+++ b/include/linux/reiserfs_fs.h
@@ -526,8 +526,8 @@ struct item_head {
 ** p is the array of __u32, i is the index into the array, v is the value
 ** to store there.
 */
-#define get_block_num(p, i) le32_to_cpu(get_unaligned((p) + (i)))
-#define put_block_num(p, i, v) put_unaligned(cpu_to_le32(v), (p) + (i))
+#define get_block_num(p, i) get_unaligned_le32((p) + (i))
+#define put_block_num(p, i, v) put_unaligned_le32((v), (p) + (i))
 
 //
 // in old version uniqueness field shows key type
diff --git a/include/linux/reiserfs_fs_sb.h b/include/linux/reiserfs_fs_sb.h
index 336ee43ed7d8..315517e8bfa1 100644
--- a/include/linux/reiserfs_fs_sb.h
+++ b/include/linux/reiserfs_fs_sb.h
@@ -152,7 +152,7 @@ struct reiserfs_journal_list {
 	atomic_t j_nonzerolen;
 	atomic_t j_commit_left;
 	atomic_t j_older_commits_done;	/* all commits older than this on disk */
-	struct semaphore j_commit_lock;
+	struct mutex j_commit_mutex;
 	unsigned long j_trans_id;
 	time_t j_timestamp;
 	struct reiserfs_list_bitmap *j_list_bitmap;
@@ -193,8 +193,8 @@ struct reiserfs_journal {
 	struct buffer_head *j_header_bh;
 
 	time_t j_trans_start_time;	/* time this transaction started */
-	struct semaphore j_lock;
-	struct semaphore j_flush_sem;
+	struct mutex j_mutex;
+	struct mutex j_flush_mutex;
 	wait_queue_head_t j_join_wait;	/* wait for current transaction to finish before starting new one */
 	atomic_t j_jlock;	/* lock for j_join_wait */
 	int j_list_bitmap_index;	/* number of next list bitmap to use */
diff --git a/include/linux/reiserfs_xattr.h b/include/linux/reiserfs_xattr.h
index 66a96814d614..af135ae895db 100644
--- a/include/linux/reiserfs_xattr.h
+++ b/include/linux/reiserfs_xattr.h
@@ -55,7 +55,7 @@ int reiserfs_removexattr(struct dentry *dentry, const char *name);
 int reiserfs_delete_xattrs(struct inode *inode);
 int reiserfs_chown_xattrs(struct inode *inode, struct iattr *attrs);
 int reiserfs_xattr_init(struct super_block *sb, int mount_flags);
-int reiserfs_permission(struct inode *inode, int mask, struct nameidata *nd);
+int reiserfs_permission(struct inode *inode, int mask);
 
 int reiserfs_xattr_del(struct inode *, const char *);
 int reiserfs_xattr_get(const struct inode *, const char *, void *, size_t);
diff --git a/include/linux/relay.h b/include/linux/relay.h
index 6cd8c4425fc7..953fc055e875 100644
--- a/include/linux/relay.h
+++ b/include/linux/relay.h
@@ -48,6 +48,7 @@ struct rchan_buf
 	size_t *padding;		/* padding counts per sub-buffer */
 	size_t prev_padding;		/* temporary variable */
 	size_t bytes_consumed;		/* bytes consumed in cur read subbuf */
+	size_t early_bytes;		/* bytes consumed before VFS inited */
 	unsigned int cpu;		/* this buf's cpu */
 } ____cacheline_aligned;
 
@@ -68,6 +69,7 @@ struct rchan
 	int is_global;			/* One global buffer ? */
 	struct list_head list;		/* for channel list */
 	struct dentry *parent;		/* parent dentry passed to open */
+	int has_base_filename;		/* has a filename associated? */
 	char base_filename[NAME_MAX];	/* saved base filename */
 };
 
@@ -169,6 +171,9 @@ struct rchan *relay_open(const char *base_filename,
 			 size_t n_subbufs,
 			 struct rchan_callbacks *cb,
 			 void *private_data);
+extern int relay_late_setup_files(struct rchan *chan,
+				  const char *base_filename,
+				  struct dentry *parent);
 extern void relay_close(struct rchan *chan);
 extern void relay_flush(struct rchan *chan);
 extern void relay_subbufs_consumed(struct rchan *chan,
diff --git a/include/linux/res_counter.h b/include/linux/res_counter.h
index 6d9e1fca098c..fdeadd9740dc 100644
--- a/include/linux/res_counter.h
+++ b/include/linux/res_counter.h
@@ -63,9 +63,14 @@ u64 res_counter_read_u64(struct res_counter *counter, int member);
 ssize_t res_counter_read(struct res_counter *counter, int member,
 		const char __user *buf, size_t nbytes, loff_t *pos,
 		int (*read_strategy)(unsigned long long val, char *s));
-ssize_t res_counter_write(struct res_counter *counter, int member,
-		const char __user *buf, size_t nbytes, loff_t *pos,
-		int (*write_strategy)(char *buf, unsigned long long *val));
+
+typedef int (*write_strategy_fn)(const char *buf, unsigned long long *val);
+
+int res_counter_memparse_write_strategy(const char *buf,
+					unsigned long long *res);
+
+int res_counter_write(struct res_counter *counter, int member,
+		      const char *buffer, write_strategy_fn write_strategy);
 
 /*
  * the field descriptors. one for each member of res_counter
@@ -95,8 +100,10 @@ void res_counter_init(struct res_counter *counter);
  * counter->limit _locked call expects the counter->lock to be taken
  */
 
-int res_counter_charge_locked(struct res_counter *counter, unsigned long val);
-int res_counter_charge(struct res_counter *counter, unsigned long val);
+int __must_check res_counter_charge_locked(struct res_counter *counter,
+		unsigned long val);
+int __must_check res_counter_charge(struct res_counter *counter,
+		unsigned long val);
 
 /*
  * uncharge - tell that some portion of the resource is released
@@ -151,4 +158,20 @@ static inline void res_counter_reset_failcnt(struct res_counter *cnt)
 	cnt->failcnt = 0;
 	spin_unlock_irqrestore(&cnt->lock, flags);
 }
+
+static inline int res_counter_set_limit(struct res_counter *cnt,
+		unsigned long long limit)
+{
+	unsigned long flags;
+	int ret = -EBUSY;
+
+	spin_lock_irqsave(&cnt->lock, flags);
+	if (cnt->usage < limit) {
+		cnt->limit = limit;
+		ret = 0;
+	}
+	spin_unlock_irqrestore(&cnt->lock, flags);
+	return ret;
+}
+
 #endif
diff --git a/include/linux/rfkill.h b/include/linux/rfkill.h
index c5f6e54ec6ae..741d1a62cc3f 100644
--- a/include/linux/rfkill.h
+++ b/include/linux/rfkill.h
@@ -68,7 +68,8 @@ enum rfkill_state {
  * @user_claim_unsupported: Whether the hardware supports exclusive
  *	RF-kill control by userspace. Set this before registering.
  * @user_claim: Set when the switch is controlled exlusively by userspace.
- * @mutex: Guards switch state transitions
+ * @mutex: Guards switch state transitions.  It serializes callbacks
+ *	and also protects the state.
  * @data: Pointer to the RF button drivers private data which will be
  *	passed along when toggling radio state.
  * @toggle_radio(): Mandatory handler to control state of the radio.
@@ -89,12 +90,13 @@ struct rfkill {
 	const char *name;
 	enum rfkill_type type;
 
-	enum rfkill_state state;
 	bool user_claim_unsupported;
 	bool user_claim;
 
+	/* the mutex serializes callbacks and also protects
+	 * the state */
 	struct mutex mutex;
-
+	enum rfkill_state state;
 	void *data;
 	int (*toggle_radio)(void *data, enum rfkill_state state);
 	int (*get_state)(void *data, enum rfkill_state *state);
diff --git a/include/linux/rmap.h b/include/linux/rmap.h
index 1383692ac5bd..fed6f5e0b411 100644
--- a/include/linux/rmap.h
+++ b/include/linux/rmap.h
@@ -26,6 +26,14 @@
  */
 struct anon_vma {
 	spinlock_t lock;	/* Serialize access to vma list */
+	/*
+	 * NOTE: the LSB of the head.next is set by
+	 * mm_take_all_locks() _after_ taking the above lock. So the
+	 * head must only be read/written after taking the above lock
+	 * to be sure to see a valid next pointer. The LSB bit itself
+	 * is serialized by a system wide lock only visible to
+	 * mm_take_all_locks() (mm_all_locks_mutex).
+	 */
 	struct list_head head;	/* List of private "related" vmas */
 };
 
@@ -94,7 +102,7 @@ int try_to_unmap(struct page *, int ignore_refs);
  * Called from mm/filemap_xip.c to unmap empty zero page
  */
 pte_t *page_check_address(struct page *, struct mm_struct *,
-				unsigned long, spinlock_t **);
+				unsigned long, spinlock_t **, int);
 
 /*
  * Used by swapoff to help locate where page is expected in vma.
diff --git a/include/linux/rtc.h b/include/linux/rtc.h
index b01fe004cb5e..91f597ad6acc 100644
--- a/include/linux/rtc.h
+++ b/include/linux/rtc.h
@@ -225,8 +225,6 @@ typedef struct rtc_task {
 int rtc_register(rtc_task_t *task);
 int rtc_unregister(rtc_task_t *task);
 int rtc_control(rtc_task_t *t, unsigned int cmd, unsigned long arg);
-void rtc_get_rtc_time(struct rtc_time *rtc_tm);
-irqreturn_t rtc_interrupt(int irq, void *dev_id);
 
 #endif /* __KERNEL__ */
 
diff --git a/include/linux/rtnetlink.h b/include/linux/rtnetlink.h
index f4d386c191f5..ca643b13b026 100644
--- a/include/linux/rtnetlink.h
+++ b/include/linux/rtnetlink.h
@@ -755,13 +755,6 @@ extern void __rtnl_unlock(void);
 	} \
 } while(0)
 
-#define BUG_TRAP(x) do { \
-	if (unlikely(!(x))) { \
-		printk(KERN_ERR "KERNEL: assertion (%s) failed at %s (%d)\n", \
-			#x,  __FILE__ , __LINE__); \
-	} \
-} while(0)
-
 static inline u32 rtm_get_table(struct rtattr **rta, u8 table)
 {
 	return RTA_GET_U32(rta[RTA_TABLE-1]);
diff --git a/include/linux/sched.h b/include/linux/sched.h
index 6aca4a16e377..cfb0d87b99fc 100644
--- a/include/linux/sched.h
+++ b/include/linux/sched.h
@@ -87,6 +87,7 @@ struct sched_param {
 #include <linux/task_io_accounting.h>
 #include <linux/kobject.h>
 #include <linux/latencytop.h>
+#include <linux/cred.h>
 
 #include <asm/processor.h>
 
@@ -292,7 +293,6 @@ extern void sched_show_task(struct task_struct *p);
 
 #ifdef CONFIG_DETECT_SOFTLOCKUP
 extern void softlockup_tick(void);
-extern void spawn_softlockup_task(void);
 extern void touch_softlockup_watchdog(void);
 extern void touch_all_softlockup_watchdogs(void);
 extern unsigned int  softlockup_panic;
@@ -506,6 +506,7 @@ struct signal_struct {
 	unsigned long nvcsw, nivcsw, cnvcsw, cnivcsw;
 	unsigned long min_flt, maj_flt, cmin_flt, cmaj_flt;
 	unsigned long inblock, oublock, cinblock, coublock;
+	struct task_io_accounting ioac;
 
 	/*
 	 * Cumulative ns of scheduled CPU time for dead threads in the
@@ -668,6 +669,10 @@ struct task_delay_info {
 				/* io operations performed */
 	u32 swapin_count;	/* total count of the number of swapin block */
 				/* io operations performed */
+
+	struct timespec freepages_start, freepages_end;
+	u64 freepages_delay;	/* wait for memory reclaim */
+	u32 freepages_count;	/* total count of memory reclaim */
 };
 #endif	/* CONFIG_TASK_DELAY_ACCT */
 
@@ -1249,15 +1254,11 @@ struct task_struct {
 
 	unsigned long ptrace_message;
 	siginfo_t *last_siginfo; /* For ptrace use.  */
-#ifdef CONFIG_TASK_XACCT
-/* i/o counters(bytes read/written, #syscalls */
-	u64 rchar, wchar, syscr, syscw;
-#endif
 	struct task_io_accounting ioac;
 #if defined(CONFIG_TASK_XACCT)
 	u64 acct_rss_mem1;	/* accumulated rss usage */
 	u64 acct_vm_mem1;	/* accumulated virtual memory usage */
-	cputime_t acct_stimexpd;/* stime since last update */
+	cputime_t acct_timexpd;	/* stime + utime since last update */
 #endif
 #ifdef CONFIG_CPUSETS
 	nodemask_t mems_allowed;
@@ -1496,7 +1497,7 @@ static inline void put_task_struct(struct task_struct *t)
 #define PF_KSWAPD	0x00040000	/* I am kswapd */
 #define PF_SWAPOFF	0x00080000	/* I am in swapoff */
 #define PF_LESS_THROTTLE 0x00100000	/* Throttle me less: I clean memory */
-#define PF_BORROWED_MM	0x00200000	/* I am a kthread doing use_mm */
+#define PF_KTHREAD	0x00200000	/* I am a kernel thread */
 #define PF_RANDOMIZE	0x00400000	/* randomize virtual address space */
 #define PF_SWAPWRITE	0x00800000	/* Allowed to write to swap */
 #define PF_SPREAD_PAGE	0x01000000	/* Spread page cache over cpuset */
@@ -1551,16 +1552,10 @@ static inline int set_cpus_allowed(struct task_struct *p, cpumask_t new_mask)
 
 extern unsigned long long sched_clock(void);
 
-#ifndef CONFIG_HAVE_UNSTABLE_SCHED_CLOCK
-static inline void sched_clock_init(void)
-{
-}
-
-static inline u64 sched_clock_cpu(int cpu)
-{
-	return sched_clock();
-}
+extern void sched_clock_init(void);
+extern u64 sched_clock_cpu(int cpu);
 
+#ifndef CONFIG_HAVE_UNSTABLE_SCHED_CLOCK
 static inline void sched_clock_tick(void)
 {
 }
@@ -1572,28 +1567,11 @@ static inline void sched_clock_idle_sleep_event(void)
 static inline void sched_clock_idle_wakeup_event(u64 delta_ns)
 {
 }
-
-#ifdef CONFIG_NO_HZ
-static inline void sched_clock_tick_stop(int cpu)
-{
-}
-
-static inline void sched_clock_tick_start(int cpu)
-{
-}
-#endif
-
-#else /* CONFIG_HAVE_UNSTABLE_SCHED_CLOCK */
-extern void sched_clock_init(void);
-extern u64 sched_clock_cpu(int cpu);
+#else
 extern void sched_clock_tick(void);
 extern void sched_clock_idle_sleep_event(void);
 extern void sched_clock_idle_wakeup_event(u64 delta_ns);
-#ifdef CONFIG_NO_HZ
-extern void sched_clock_tick_stop(int cpu);
-extern void sched_clock_tick_start(int cpu);
 #endif
-#endif /* CONFIG_HAVE_UNSTABLE_SCHED_CLOCK */
 
 /*
  * For kernel-internal use: high-speed (but slightly incorrect) per-cpu
@@ -1715,19 +1693,13 @@ extern struct pid_namespace init_pid_ns;
  *      finds a task by its pid in the specified namespace
  * find_task_by_vpid():
  *      finds a task by its virtual pid
- * find_task_by_pid():
- *      finds a task by its global pid
  *
- * see also find_pid() etc in include/linux/pid.h
+ * see also find_vpid() etc in include/linux/pid.h
  */
 
 extern struct task_struct *find_task_by_pid_type_ns(int type, int pid,
 		struct pid_namespace *ns);
 
-static inline struct task_struct *__deprecated find_task_by_pid(pid_t nr)
-{
-	return find_task_by_pid_type_ns(PIDTYPE_PID, nr, &init_pid_ns);
-}
 extern struct task_struct *find_task_by_vpid(pid_t nr);
 extern struct task_struct *find_task_by_pid_ns(pid_t nr,
 		struct pid_namespace *ns);
@@ -1795,12 +1767,11 @@ extern int kill_pid_info_as_uid(int, struct siginfo *, struct pid *, uid_t, uid_
 extern int kill_pgrp(struct pid *pid, int sig, int priv);
 extern int kill_pid(struct pid *pid, int sig, int priv);
 extern int kill_proc_info(int, struct siginfo *, pid_t);
-extern void do_notify_parent(struct task_struct *, int);
+extern int do_notify_parent(struct task_struct *, int);
 extern void force_sig(int, struct task_struct *);
 extern void force_sig_specific(int, struct task_struct *);
 extern int send_sig(int, struct task_struct *, int);
 extern void zap_other_threads(struct task_struct *p);
-extern int kill_proc(pid_t, int, int);
 extern struct sigqueue *sigqueue_alloc(void);
 extern void sigqueue_free(struct sigqueue *);
 extern int send_sigqueue(struct sigqueue *,  struct task_struct *, int group);
@@ -1882,9 +1853,13 @@ extern void set_task_comm(struct task_struct *tsk, char *from);
 extern char *get_task_comm(char *to, struct task_struct *tsk);
 
 #ifdef CONFIG_SMP
-extern void wait_task_inactive(struct task_struct * p);
+extern unsigned long wait_task_inactive(struct task_struct *, long match_state);
 #else
-#define wait_task_inactive(p)	do { } while (0)
+static inline unsigned long wait_task_inactive(struct task_struct *p,
+					       long match_state)
+{
+	return 1;
+}
 #endif
 
 #define next_task(p)	list_entry(rcu_dereference((p)->tasks.next), struct task_struct, tasks)
@@ -2054,9 +2029,6 @@ static inline int signal_pending_state(long state, struct task_struct *p)
 	if (!signal_pending(p))
 		return 0;
 
-	if (state & (__TASK_STOPPED | __TASK_TRACED))
-		return 0;
-
 	return (state & TASK_INTERRUPTIBLE) || __fatal_signal_pending(p);
 }
 
@@ -2141,16 +2113,7 @@ static inline void set_task_cpu(struct task_struct *p, unsigned int cpu)
 
 #endif /* CONFIG_SMP */
 
-#ifdef HAVE_ARCH_PICK_MMAP_LAYOUT
 extern void arch_pick_mmap_layout(struct mm_struct *mm);
-#else
-static inline void arch_pick_mmap_layout(struct mm_struct *mm)
-{
-	mm->mmap_base = TASK_UNMAPPED_BASE;
-	mm->get_unmapped_area = arch_get_unmapped_area;
-	mm->unmap_area = arch_unmap_area;
-}
-#endif
 
 #ifdef CONFIG_TRACING
 extern void
@@ -2198,22 +2161,22 @@ extern long sched_group_rt_period(struct task_group *tg);
 #ifdef CONFIG_TASK_XACCT
 static inline void add_rchar(struct task_struct *tsk, ssize_t amt)
 {
-	tsk->rchar += amt;
+	tsk->ioac.rchar += amt;
 }
 
 static inline void add_wchar(struct task_struct *tsk, ssize_t amt)
 {
-	tsk->wchar += amt;
+	tsk->ioac.wchar += amt;
 }
 
 static inline void inc_syscr(struct task_struct *tsk)
 {
-	tsk->syscr++;
+	tsk->ioac.syscr++;
 }
 
 static inline void inc_syscw(struct task_struct *tsk)
 {
-	tsk->syscw++;
+	tsk->ioac.syscw++;
 }
 #else
 static inline void add_rchar(struct task_struct *tsk, ssize_t amt)
@@ -2233,14 +2196,6 @@ static inline void inc_syscw(struct task_struct *tsk)
 }
 #endif
 
-#ifdef CONFIG_SMP
-void migration_init(void);
-#else
-static inline void migration_init(void)
-{
-}
-#endif
-
 #ifndef TASK_SIZE_OF
 #define TASK_SIZE_OF(tsk)	TASK_SIZE
 #endif
diff --git a/include/linux/security.h b/include/linux/security.h
index f0e9adb22ac2..80c4d002864c 100644
--- a/include/linux/security.h
+++ b/include/linux/security.h
@@ -46,8 +46,8 @@ struct audit_krule;
  */
 extern int cap_capable(struct task_struct *tsk, int cap);
 extern int cap_settime(struct timespec *ts, struct timezone *tz);
-extern int cap_ptrace(struct task_struct *parent, struct task_struct *child,
-		      unsigned int mode);
+extern int cap_ptrace_may_access(struct task_struct *child, unsigned int mode);
+extern int cap_ptrace_traceme(struct task_struct *parent);
 extern int cap_capget(struct task_struct *target, kernel_cap_t *effective, kernel_cap_t *inheritable, kernel_cap_t *permitted);
 extern int cap_capset_check(struct task_struct *target, kernel_cap_t *effective, kernel_cap_t *inheritable, kernel_cap_t *permitted);
 extern void cap_capset_set(struct task_struct *target, kernel_cap_t *effective, kernel_cap_t *inheritable, kernel_cap_t *permitted);
@@ -1157,17 +1157,24 @@ static inline void security_free_mnt_opts(struct security_mnt_opts *opts)
  *	@alter contains the flag indicating whether changes are to be made.
  *	Return 0 if permission is granted.
  *
- * @ptrace:
- *	Check permission before allowing the @parent process to trace the
+ * @ptrace_may_access:
+ *	Check permission before allowing the current process to trace the
  *	@child process.
  *	Security modules may also want to perform a process tracing check
  *	during an execve in the set_security or apply_creds hooks of
  *	binprm_security_ops if the process is being traced and its security
  *	attributes would be changed by the execve.
- *	@parent contains the task_struct structure for parent process.
- *	@child contains the task_struct structure for child process.
+ *	@child contains the task_struct structure for the target process.
  *	@mode contains the PTRACE_MODE flags indicating the form of access.
  *	Return 0 if permission is granted.
+ * @ptrace_traceme:
+ *	Check that the @parent process has sufficient permission to trace the
+ *	current process before allowing the current process to present itself
+ *	to the @parent process for tracing.
+ *	The parent process will still have to undergo the ptrace_may_access
+ *	checks before it is allowed to trace this one.
+ *	@parent contains the task_struct structure for debugger process.
+ *	Return 0 if permission is granted.
  * @capget:
  *	Get the @effective, @inheritable, and @permitted capability sets for
  *	the @target process.  The hook may also perform permission checking to
@@ -1287,8 +1294,8 @@ static inline void security_free_mnt_opts(struct security_mnt_opts *opts)
 struct security_operations {
 	char name[SECURITY_NAME_MAX + 1];
 
-	int (*ptrace) (struct task_struct *parent, struct task_struct *child,
-		       unsigned int mode);
+	int (*ptrace_may_access) (struct task_struct *child, unsigned int mode);
+	int (*ptrace_traceme) (struct task_struct *parent);
 	int (*capget) (struct task_struct *target,
 		       kernel_cap_t *effective,
 		       kernel_cap_t *inheritable, kernel_cap_t *permitted);
@@ -1362,7 +1369,7 @@ struct security_operations {
 			     struct inode *new_dir, struct dentry *new_dentry);
 	int (*inode_readlink) (struct dentry *dentry);
 	int (*inode_follow_link) (struct dentry *dentry, struct nameidata *nd);
-	int (*inode_permission) (struct inode *inode, int mask, struct nameidata *nd);
+	int (*inode_permission) (struct inode *inode, int mask);
 	int (*inode_setattr)	(struct dentry *dentry, struct iattr *attr);
 	int (*inode_getattr) (struct vfsmount *mnt, struct dentry *dentry);
 	void (*inode_delete) (struct inode *inode);
@@ -1560,8 +1567,8 @@ extern struct dentry *securityfs_create_dir(const char *name, struct dentry *par
 extern void securityfs_remove(struct dentry *dentry);
 
 /* Security operations */
-int security_ptrace(struct task_struct *parent, struct task_struct *child,
-		    unsigned int mode);
+int security_ptrace_may_access(struct task_struct *child, unsigned int mode);
+int security_ptrace_traceme(struct task_struct *parent);
 int security_capget(struct task_struct *target,
 		    kernel_cap_t *effective,
 		    kernel_cap_t *inheritable,
@@ -1628,7 +1635,7 @@ int security_inode_rename(struct inode *old_dir, struct dentry *old_dentry,
 			  struct inode *new_dir, struct dentry *new_dentry);
 int security_inode_readlink(struct dentry *dentry);
 int security_inode_follow_link(struct dentry *dentry, struct nameidata *nd);
-int security_inode_permission(struct inode *inode, int mask, struct nameidata *nd);
+int security_inode_permission(struct inode *inode, int mask);
 int security_inode_setattr(struct dentry *dentry, struct iattr *attr);
 int security_inode_getattr(struct vfsmount *mnt, struct dentry *dentry);
 void security_inode_delete(struct inode *inode);
@@ -1742,11 +1749,15 @@ static inline int security_init(void)
 	return 0;
 }
 
-static inline int security_ptrace(struct task_struct *parent,
-				  struct task_struct *child,
-				  unsigned int mode)
+static inline int security_ptrace_may_access(struct task_struct *child,
+					     unsigned int mode)
+{
+	return cap_ptrace_may_access(child, mode);
+}
+
+static inline int security_ptrace_traceme(struct task_struct *parent)
 {
-	return cap_ptrace(parent, child, mode);
+	return cap_ptrace_traceme(parent);
 }
 
 static inline int security_capget(struct task_struct *target,
@@ -2021,8 +2032,7 @@ static inline int security_inode_follow_link(struct dentry *dentry,
 	return 0;
 }
 
-static inline int security_inode_permission(struct inode *inode, int mask,
-					     struct nameidata *nd)
+static inline int security_inode_permission(struct inode *inode, int mask)
 {
 	return 0;
 }
diff --git a/include/linux/sem.h b/include/linux/sem.h
index c8eaad9e4b72..1b191c176bcd 100644
--- a/include/linux/sem.h
+++ b/include/linux/sem.h
@@ -78,6 +78,7 @@ struct  seminfo {
 
 #ifdef __KERNEL__
 #include <asm/atomic.h>
+#include <linux/rcupdate.h>
 
 struct task_struct;
 
@@ -93,23 +94,19 @@ struct sem_array {
 	time_t			sem_otime;	/* last semop time */
 	time_t			sem_ctime;	/* last change time */
 	struct sem		*sem_base;	/* ptr to first semaphore in array */
-	struct sem_queue	*sem_pending;	/* pending operations to be processed */
-	struct sem_queue	**sem_pending_last; /* last pending operation */
-	struct sem_undo		*undo;		/* undo requests on this array */
+	struct list_head	sem_pending;	/* pending operations to be processed */
+	struct list_head	list_id;	/* undo requests on this array */
 	unsigned long		sem_nsems;	/* no. of semaphores in array */
 };
 
 /* One queue for each sleeping process in the system. */
 struct sem_queue {
-	struct sem_queue *	next;	 /* next entry in the queue */
-	struct sem_queue **	prev;	 /* previous entry in the queue, *(q->prev) == q */
-	struct task_struct*	sleeper; /* this process */
-	struct sem_undo *	undo;	 /* undo structure */
+	struct list_head	list;	 /* queue of pending operations */
+	struct task_struct	*sleeper; /* this process */
+	struct sem_undo		*undo;	 /* undo structure */
 	int    			pid;	 /* process id of requesting process */
 	int    			status;	 /* completion status of operation */
-	struct sem_array *	sma;	 /* semaphore array for operations */
-	int			id;	 /* internal sem id */
-	struct sembuf *		sops;	 /* array of pending operations */
+	struct sembuf		*sops;	 /* array of pending operations */
 	int			nsops;	 /* number of operations */
 	int			alter;   /* does the operation alter the array? */
 };
@@ -118,8 +115,11 @@ struct sem_queue {
  * when the process exits.
  */
 struct sem_undo {
-	struct sem_undo *	proc_next;	/* next entry on this process */
-	struct sem_undo *	id_next;	/* next entry on this semaphore set */
+	struct list_head	list_proc;	/* per-process list: all undos from one process. */
+						/* rcu protected */
+	struct rcu_head		rcu;		/* rcu struct for sem_undo() */
+	struct sem_undo_list	*ulp;		/* sem_undo_list for the process */
+	struct list_head	list_id;	/* per semaphore array list: all undos for one array */
 	int			semid;		/* semaphore set identifier */
 	short *			semadj;		/* array of adjustments, one per semaphore */
 };
@@ -128,9 +128,9 @@ struct sem_undo {
  * that may be shared among all a CLONE_SYSVSEM task group.
  */ 
 struct sem_undo_list {
-	atomic_t	refcnt;
-	spinlock_t	lock;
-	struct sem_undo	*proc_list;
+	atomic_t		refcnt;
+	spinlock_t		lock;
+	struct list_head	list_proc;
 };
 
 struct sysv_sem {
diff --git a/include/linux/seq_file.h b/include/linux/seq_file.h
index a66304a09955..a1783b229ef4 100644
--- a/include/linux/seq_file.h
+++ b/include/linux/seq_file.h
@@ -4,6 +4,8 @@
 #include <linux/types.h>
 #include <linux/string.h>
 #include <linux/mutex.h>
+#include <linux/cpumask.h>
+#include <linux/nodemask.h>
 
 struct seq_operations;
 struct file;
@@ -47,6 +49,16 @@ int seq_path(struct seq_file *, struct path *, char *);
 int seq_dentry(struct seq_file *, struct dentry *, char *);
 int seq_path_root(struct seq_file *m, struct path *path, struct path *root,
 		  char *esc);
+int seq_bitmap(struct seq_file *m, unsigned long *bits, unsigned int nr_bits);
+static inline int seq_cpumask(struct seq_file *m, cpumask_t *mask)
+{
+	return seq_bitmap(m, mask->bits, NR_CPUS);
+}
+
+static inline int seq_nodemask(struct seq_file *m, nodemask_t *mask)
+{
+	return seq_bitmap(m, mask->bits, MAX_NUMNODES);
+}
 
 int single_open(struct file *, int (*)(struct seq_file *, void *), void *);
 int single_release(struct inode *, struct file *);
diff --git a/include/linux/serio.h b/include/linux/serio.h
index e72716cca577..25641d9e0ea8 100644
--- a/include/linux/serio.h
+++ b/include/linux/serio.h
@@ -87,11 +87,10 @@ void serio_unregister_port(struct serio *serio);
 void serio_unregister_child_port(struct serio *serio);
 
 int __serio_register_driver(struct serio_driver *drv, struct module *owner, const char *mod_name);
-static inline int serio_register_driver(struct serio_driver *drv)
+static inline int __must_check serio_register_driver(struct serio_driver *drv)
 {
 	return __serio_register_driver(drv, THIS_MODULE, KBUILD_MODNAME);
 }
-int serio_register_driver(struct serio_driver *drv);
 void serio_unregister_driver(struct serio_driver *drv);
 
 static inline int serio_write(struct serio *serio, unsigned char data)
diff --git a/include/linux/shmem_fs.h b/include/linux/shmem_fs.h
index f2d12d5a21b8..fd83f2584b15 100644
--- a/include/linux/shmem_fs.h
+++ b/include/linux/shmem_fs.h
@@ -43,7 +43,7 @@ static inline struct shmem_inode_info *SHMEM_I(struct inode *inode)
 }
 
 #ifdef CONFIG_TMPFS_POSIX_ACL
-int shmem_permission(struct inode *, int, struct nameidata *);
+int shmem_permission(struct inode *, int);
 int shmem_acl_init(struct inode *, struct inode *);
 void shmem_acl_destroy_inode(struct inode *);
 
diff --git a/include/linux/skbuff.h b/include/linux/skbuff.h
index 7ea44f6621f2..909923717830 100644
--- a/include/linux/skbuff.h
+++ b/include/linux/skbuff.h
@@ -243,6 +243,7 @@ typedef unsigned char *sk_buff_data_t;
  *	@tc_index: Traffic control index
  *	@tc_verd: traffic control verdict
  *	@ndisc_nodetype: router type (from link layer)
+ *	@do_not_encrypt: set to prevent encryption of this frame
  *	@dma_cookie: a cookie to one of several possible DMA operations
  *		done by skb DMA functions
  *	@secmark: security marking
@@ -316,7 +317,10 @@ struct sk_buff {
 #ifdef CONFIG_IPV6_NDISC_NODETYPE
 	__u8			ndisc_nodetype:2;
 #endif
-	/* 14 bit hole */
+#if defined(CONFIG_MAC80211) || defined(CONFIG_MAC80211_MODULE)
+	__u8			do_not_encrypt:1;
+#endif
+	/* 0/13/14 bit hole */
 
 #ifdef CONFIG_NET_DMA
 	dma_cookie_t		dma_cookie;
@@ -897,7 +901,7 @@ extern unsigned char *__pskb_pull_tail(struct sk_buff *skb, int delta);
 static inline unsigned char *__pskb_pull(struct sk_buff *skb, unsigned int len)
 {
 	if (len > skb_headlen(skb) &&
-	    !__pskb_pull_tail(skb, len-skb_headlen(skb)))
+	    !__pskb_pull_tail(skb, len - skb_headlen(skb)))
 		return NULL;
 	skb->len -= len;
 	return skb->data += len;
@@ -914,7 +918,7 @@ static inline int pskb_may_pull(struct sk_buff *skb, unsigned int len)
 		return 1;
 	if (unlikely(len > skb->len))
 		return 0;
-	return __pskb_pull_tail(skb, len-skb_headlen(skb)) != NULL;
+	return __pskb_pull_tail(skb, len - skb_headlen(skb)) != NULL;
 }
 
 /**
@@ -1317,7 +1321,7 @@ static inline int skb_padto(struct sk_buff *skb, unsigned int len)
 	unsigned int size = skb->len;
 	if (likely(size >= len))
 		return 0;
-	return skb_pad(skb, len-size);
+	return skb_pad(skb, len - size);
 }
 
 static inline int skb_add_data(struct sk_buff *skb,
@@ -1448,6 +1452,10 @@ extern int	       skb_copy_datagram_iovec(const struct sk_buff *from,
 extern int	       skb_copy_and_csum_datagram_iovec(struct sk_buff *skb,
 							int hlen,
 							struct iovec *iov);
+extern int	       skb_copy_datagram_from_iovec(struct sk_buff *skb,
+						    int offset,
+						    struct iovec *from,
+						    int len);
 extern void	       skb_free_datagram(struct sock *sk, struct sk_buff *skb);
 extern int	       skb_kill_datagram(struct sock *sk, struct sk_buff *skb,
 					 unsigned int flags);
diff --git a/include/linux/slab.h b/include/linux/slab.h
index 41103910f8a2..5ff9676c1e2c 100644
--- a/include/linux/slab.h
+++ b/include/linux/slab.h
@@ -58,7 +58,7 @@ int slab_is_available(void);
 
 struct kmem_cache *kmem_cache_create(const char *, size_t, size_t,
 			unsigned long,
-			void (*)(struct kmem_cache *, void *));
+			void (*)(void *));
 void kmem_cache_destroy(struct kmem_cache *);
 int kmem_cache_shrink(struct kmem_cache *);
 void kmem_cache_free(struct kmem_cache *, void *);
@@ -96,6 +96,7 @@ int kmem_ptr_validate(struct kmem_cache *cachep, const void *ptr);
 /*
  * Common kmalloc functions provided by all allocators
  */
+void * __must_check __krealloc(const void *, size_t, gfp_t);
 void * __must_check krealloc(const void *, size_t, gfp_t);
 void kfree(const void *);
 size_t ksize(const void *);
diff --git a/include/linux/slub_def.h b/include/linux/slub_def.h
index d117ea2825a9..2f5c16b1aacd 100644
--- a/include/linux/slub_def.h
+++ b/include/linux/slub_def.h
@@ -46,6 +46,7 @@ struct kmem_cache_cpu {
 struct kmem_cache_node {
 	spinlock_t list_lock;	/* Protect partial list and nr_partial */
 	unsigned long nr_partial;
+	unsigned long min_partial;
 	struct list_head partial;
 #ifdef CONFIG_SLUB_DEBUG
 	atomic_long_t nr_slabs;
@@ -85,7 +86,7 @@ struct kmem_cache {
 	struct kmem_cache_order_objects min;
 	gfp_t allocflags;	/* gfp flags to use on each alloc */
 	int refcount;		/* Refcount for slab cache destroy */
-	void (*ctor)(struct kmem_cache *, void *);
+	void (*ctor)(void *);
 	int inuse;		/* Offset to metadata */
 	int align;		/* Alignment */
 	const char *name;	/* Name (only for display!) */
diff --git a/include/linux/sm501.h b/include/linux/sm501.h
index b530fa6a1d34..214f93209b8c 100644
--- a/include/linux/sm501.h
+++ b/include/linux/sm501.h
@@ -46,24 +46,6 @@ extern unsigned long sm501_modify_reg(struct device *dev,
 				      unsigned long set,
 				      unsigned long clear);
 
-/* sm501_gpio_set
- *
- * set the state of the given GPIO line
-*/
-
-extern void sm501_gpio_set(struct device *dev,
-			   unsigned long gpio,
-			   unsigned int to,
-			   unsigned int dir);
-
-/* sm501_gpio_get
- *
- * get the state of the given GPIO line
-*/
-
-extern unsigned long sm501_gpio_get(struct device *dev,
-				    unsigned long gpio);
-
 
 /* Platform data definitions */
 
@@ -104,11 +86,19 @@ struct sm501_platdata_fb {
 	struct sm501_platdata_fbsub	*fb_pnl;
 };
 
-/* gpio i2c */
+/* gpio i2c
+ *
+ * Note, we have to pass in the bus number, as the number used will be
+ * passed to the i2c-gpio driver's platform_device.id, subsequently used
+ * to register the i2c bus.
+*/
 
 struct sm501_platdata_gpio_i2c {
+	unsigned int		bus_num;
 	unsigned int		pin_sda;
 	unsigned int		pin_scl;
+	int			udelay;
+	int			timeout;
 };
 
 /* sm501_initdata
@@ -131,6 +121,7 @@ struct sm501_reg_init {
 #define SM501_USE_FBACCEL	(1<<6)
 #define SM501_USE_AC97		(1<<7)
 #define SM501_USE_I2S		(1<<8)
+#define SM501_USE_GPIO		(1<<9)
 
 #define SM501_USE_ALL		(0xffffffff)
 
@@ -157,6 +148,8 @@ struct sm501_init_gpio {
 	struct sm501_reg_init	gpio_ddr_high;
 };
 
+#define SM501_FLAG_SUSPEND_OFF		(1<<4)
+
 /* sm501_platdata
  *
  * This is passed with the platform device to allow the board
@@ -170,6 +163,12 @@ struct sm501_platdata {
 	struct sm501_init_gpio		*init_gpiop;
 	struct sm501_platdata_fb	*fb;
 
+	int				 flags;
+	int				 gpio_base;
+
+	int	(*get_power)(struct device *dev);
+	int	(*set_power)(struct device *dev, unsigned int on);
+
 	struct sm501_platdata_gpio_i2c	*gpio_i2c;
 	unsigned int			 gpio_i2c_nr;
 };
diff --git a/include/linux/smb_fs.h b/include/linux/smb_fs.h
index 2c5cd55f44ff..923cd8a247b1 100644
--- a/include/linux/smb_fs.h
+++ b/include/linux/smb_fs.h
@@ -43,18 +43,13 @@ static inline struct smb_inode_info *SMB_I(struct inode *inode)
 }
 
 /* macro names are short for word, double-word, long value (?) */
-#define WVAL(buf,pos) \
-	(le16_to_cpu(get_unaligned((__le16 *)((u8 *)(buf) + (pos)))))
-#define DVAL(buf,pos) \
-	(le32_to_cpu(get_unaligned((__le32 *)((u8 *)(buf) + (pos)))))
-#define LVAL(buf,pos) \
-	(le64_to_cpu(get_unaligned((__le64 *)((u8 *)(buf) + (pos)))))
-#define WSET(buf,pos,val) \
-	put_unaligned(cpu_to_le16((u16)(val)), (__le16 *)((u8 *)(buf) + (pos)))
-#define DSET(buf,pos,val) \
-	put_unaligned(cpu_to_le32((u32)(val)), (__le32 *)((u8 *)(buf) + (pos)))
-#define LSET(buf,pos,val) \
-	put_unaligned(cpu_to_le64((u64)(val)), (__le64 *)((u8 *)(buf) + (pos)))
+#define WVAL(buf, pos) (get_unaligned_le16((u8 *)(buf) + (pos)))
+#define DVAL(buf, pos) (get_unaligned_le32((u8 *)(buf) + (pos)))
+#define LVAL(buf, pos) (get_unaligned_le64((u8 *)(buf) + (pos)))
+
+#define WSET(buf, pos, val) put_unaligned_le16((val), (u8 *)(buf) + (pos))
+#define DSET(buf, pos, val) put_unaligned_le32((val), (u8 *)(buf) + (pos))
+#define LSET(buf, pos, val) put_unaligned_le64((val), (u8 *)(buf) + (pos))
 
 /* where to find the base of the SMB packet proper */
 #define smb_base(buf) ((u8 *)(((u8 *)(buf))+4))
diff --git a/include/linux/smp.h b/include/linux/smp.h
index 48262f86c969..66484d4a8459 100644
--- a/include/linux/smp.h
+++ b/include/linux/smp.h
@@ -74,15 +74,10 @@ void __smp_call_function_single(int cpuid, struct call_single_data *data);
 #ifdef CONFIG_USE_GENERIC_SMP_HELPERS
 void generic_smp_call_function_single_interrupt(void);
 void generic_smp_call_function_interrupt(void);
-void init_call_single_data(void);
 void ipi_call_lock(void);
 void ipi_call_unlock(void);
 void ipi_call_lock_irq(void);
 void ipi_call_unlock_irq(void);
-#else
-static inline void init_call_single_data(void)
-{
-}
 #endif
 
 /*
diff --git a/include/linux/snmp.h b/include/linux/snmp.h
index 5df62ef1280c..7a6e6bba4a71 100644
--- a/include/linux/snmp.h
+++ b/include/linux/snmp.h
@@ -214,6 +214,8 @@ enum
 	LINUX_MIB_TCPDSACKIGNOREDOLD,		/* TCPSACKIgnoredOld */
 	LINUX_MIB_TCPDSACKIGNOREDNOUNDO,	/* TCPSACKIgnoredNoUndo */
 	LINUX_MIB_TCPSPURIOUSRTOS,		/* TCPSpuriousRTOs */
+	LINUX_MIB_TCPMD5NOTFOUND,		/* TCPMD5NotFound */
+	LINUX_MIB_TCPMD5UNEXPECTED,		/* TCPMD5Unexpected */
 	__LINUX_MIB_MAX
 };
 
diff --git a/include/linux/socket.h b/include/linux/socket.h
index 950af631e7fb..dc5086fe7736 100644
--- a/include/linux/socket.h
+++ b/include/linux/socket.h
@@ -189,7 +189,8 @@ struct ucred {
 #define AF_BLUETOOTH	31	/* Bluetooth sockets 		*/
 #define AF_IUCV		32	/* IUCV sockets			*/
 #define AF_RXRPC	33	/* RxRPC sockets 		*/
-#define AF_MAX		34	/* For now.. */
+#define AF_ISDN		34	/* mISDN sockets 		*/
+#define AF_MAX		35	/* For now.. */
 
 /* Protocol families, same as address families. */
 #define PF_UNSPEC	AF_UNSPEC
@@ -225,6 +226,7 @@ struct ucred {
 #define PF_BLUETOOTH	AF_BLUETOOTH
 #define PF_IUCV		AF_IUCV
 #define PF_RXRPC	AF_RXRPC
+#define PF_ISDN		AF_ISDN
 #define PF_MAX		AF_MAX
 
 /* Maximum queue length specifiable by listen.  */
diff --git a/include/linux/spi/mcp23s08.h b/include/linux/spi/mcp23s08.h
index 835ddf47d45c..22ef107d7704 100644
--- a/include/linux/spi/mcp23s08.h
+++ b/include/linux/spi/mcp23s08.h
@@ -1,18 +1,25 @@
 
-/* FIXME driver should be able to handle all four slaves that
- * can be hooked up to each chipselect, as well as IRQs...
- */
+/* FIXME driver should be able to handle IRQs...  */
+
+struct mcp23s08_chip_info {
+	bool	is_present;		/* true iff populated */
+	u8	pullups;		/* BIT(x) means enable pullup x */
+};
 
 struct mcp23s08_platform_data {
-	/* four slaves can share one SPI chipselect */
-	u8		slave;
+	/* Four slaves (numbered 0..3) can share one SPI chipselect, and
+	 * will provide 8..32 GPIOs using 1..4 gpio_chip instances.
+	 */
+	struct mcp23s08_chip_info	chip[4];
 
-	/* number assigned to the first GPIO */
+	/* "base" is the number of the first GPIO.  Dynamic assignment is
+	 * not currently supported, and even if there are gaps in chip
+	 * addressing the GPIO numbers are sequential .. so for example
+	 * if only slaves 0 and 3 are present, their GPIOs range from
+	 * base to base+15.
+	 */
 	unsigned	base;
 
-	/* pins with pullups */
-	u8		pullups;
-
 	void		*context;	/* param to setup/teardown */
 
 	int		(*setup)(struct spi_device *spi,
diff --git a/include/linux/spi/orion_spi.h b/include/linux/spi/orion_spi.h
new file mode 100644
index 000000000000..b4d9fa6f797c
--- /dev/null
+++ b/include/linux/spi/orion_spi.h
@@ -0,0 +1,17 @@
+/*
+ * orion_spi.h
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __LINUX_SPI_ORION_SPI_H
+#define __LINUX_SPI_ORION_SPI_H
+
+struct orion_spi_info {
+	u32	tclk;		/* no <linux/clk.h> support yet */
+};
+
+
+#endif
diff --git a/include/linux/spi/spi.h b/include/linux/spi/spi.h
index a9cc29d46653..4be01bb44377 100644
--- a/include/linux/spi/spi.h
+++ b/include/linux/spi/spi.h
@@ -778,8 +778,20 @@ spi_register_board_info(struct spi_board_info const *info, unsigned n)
  * use spi_new_device() to describe each device.  You can also call
  * spi_unregister_device() to start making that device vanish, but
  * normally that would be handled by spi_unregister_master().
+ *
+ * You can also use spi_alloc_device() and spi_add_device() to use a two
+ * stage registration sequence for each spi_device.  This gives the caller
+ * some more control over the spi_device structure before it is registered,
+ * but requires that caller to initialize fields that would otherwise
+ * be defined using the board info.
  */
 extern struct spi_device *
+spi_alloc_device(struct spi_master *master);
+
+extern int
+spi_add_device(struct spi_device *spi);
+
+extern struct spi_device *
 spi_new_device(struct spi_master *, struct spi_board_info *);
 
 static inline void
diff --git a/include/linux/spinlock.h b/include/linux/spinlock.h
index d311a090fae7..e0c0fccced46 100644
--- a/include/linux/spinlock.h
+++ b/include/linux/spinlock.h
@@ -46,6 +46,7 @@
  *  linux/spinlock.h:     builds the final spin_*() APIs.
  */
 
+#include <linux/typecheck.h>
 #include <linux/preempt.h>
 #include <linux/linkage.h>
 #include <linux/compiler.h>
@@ -182,8 +183,14 @@ do {								\
 
 #ifdef CONFIG_DEBUG_LOCK_ALLOC
 # define spin_lock_nested(lock, subclass) _spin_lock_nested(lock, subclass)
+# define spin_lock_nest_lock(lock, nest_lock)				\
+	 do {								\
+		 typecheck(struct lockdep_map *, &(nest_lock)->dep_map);\
+		 _spin_lock_nest_lock(lock, &(nest_lock)->dep_map);	\
+	 } while (0)
 #else
 # define spin_lock_nested(lock, subclass) _spin_lock(lock)
+# define spin_lock_nest_lock(lock, nest_lock) _spin_lock(lock)
 #endif
 
 #define write_lock(lock)		_write_lock(lock)
@@ -191,23 +198,53 @@ do {								\
 
 #if defined(CONFIG_SMP) || defined(CONFIG_DEBUG_SPINLOCK)
 
-#define spin_lock_irqsave(lock, flags)	flags = _spin_lock_irqsave(lock)
-#define read_lock_irqsave(lock, flags)	flags = _read_lock_irqsave(lock)
-#define write_lock_irqsave(lock, flags)	flags = _write_lock_irqsave(lock)
+#define spin_lock_irqsave(lock, flags)			\
+	do {						\
+		typecheck(unsigned long, flags);	\
+		flags = _spin_lock_irqsave(lock);	\
+	} while (0)
+#define read_lock_irqsave(lock, flags)			\
+	do {						\
+		typecheck(unsigned long, flags);	\
+		flags = _read_lock_irqsave(lock);	\
+	} while (0)
+#define write_lock_irqsave(lock, flags)			\
+	do {						\
+		typecheck(unsigned long, flags);	\
+		flags = _write_lock_irqsave(lock);	\
+	} while (0)
 
 #ifdef CONFIG_DEBUG_LOCK_ALLOC
-#define spin_lock_irqsave_nested(lock, flags, subclass) \
-	flags = _spin_lock_irqsave_nested(lock, subclass)
+#define spin_lock_irqsave_nested(lock, flags, subclass)			\
+	do {								\
+		typecheck(unsigned long, flags);			\
+		flags = _spin_lock_irqsave_nested(lock, subclass);	\
+	} while (0)
 #else
-#define spin_lock_irqsave_nested(lock, flags, subclass) \
-	flags = _spin_lock_irqsave(lock)
+#define spin_lock_irqsave_nested(lock, flags, subclass)			\
+	do {								\
+		typecheck(unsigned long, flags);			\
+		flags = _spin_lock_irqsave(lock);			\
+	} while (0)
 #endif
 
 #else
 
-#define spin_lock_irqsave(lock, flags)	_spin_lock_irqsave(lock, flags)
-#define read_lock_irqsave(lock, flags)	_read_lock_irqsave(lock, flags)
-#define write_lock_irqsave(lock, flags)	_write_lock_irqsave(lock, flags)
+#define spin_lock_irqsave(lock, flags)			\
+	do {						\
+		typecheck(unsigned long, flags);	\
+		_spin_lock_irqsave(lock, flags);	\
+	} while (0)
+#define read_lock_irqsave(lock, flags)			\
+	do {						\
+		typecheck(unsigned long, flags);	\
+		_read_lock_irqsave(lock, flags);	\
+	} while (0)
+#define write_lock_irqsave(lock, flags)			\
+	do {						\
+		typecheck(unsigned long, flags);	\
+		_write_lock_irqsave(lock, flags);	\
+	} while (0)
 #define spin_lock_irqsave_nested(lock, flags, subclass)	\
 	spin_lock_irqsave(lock, flags)
 
@@ -260,16 +297,25 @@ do {						\
 } while (0)
 #endif
 
-#define spin_unlock_irqrestore(lock, flags) \
-					_spin_unlock_irqrestore(lock, flags)
+#define spin_unlock_irqrestore(lock, flags)		\
+	do {						\
+		typecheck(unsigned long, flags);	\
+		_spin_unlock_irqrestore(lock, flags);	\
+	} while (0)
 #define spin_unlock_bh(lock)		_spin_unlock_bh(lock)
 
-#define read_unlock_irqrestore(lock, flags) \
-					_read_unlock_irqrestore(lock, flags)
+#define read_unlock_irqrestore(lock, flags)		\
+	do {						\
+		typecheck(unsigned long, flags);	\
+		_read_unlock_irqrestore(lock, flags);	\
+	} while (0)
 #define read_unlock_bh(lock)		_read_unlock_bh(lock)
 
-#define write_unlock_irqrestore(lock, flags) \
-					_write_unlock_irqrestore(lock, flags)
+#define write_unlock_irqrestore(lock, flags)		\
+	do {						\
+		typecheck(unsigned long, flags);	\
+		_write_unlock_irqrestore(lock, flags);	\
+	} while (0)
 #define write_unlock_bh(lock)		_write_unlock_bh(lock)
 
 #define spin_trylock_bh(lock)	__cond_lock(lock, _spin_trylock_bh(lock))
diff --git a/include/linux/spinlock_api_smp.h b/include/linux/spinlock_api_smp.h
index 8a2307ce7296..d79845d034b5 100644
--- a/include/linux/spinlock_api_smp.h
+++ b/include/linux/spinlock_api_smp.h
@@ -22,6 +22,8 @@ int in_lock_functions(unsigned long addr);
 void __lockfunc _spin_lock(spinlock_t *lock)		__acquires(lock);
 void __lockfunc _spin_lock_nested(spinlock_t *lock, int subclass)
 							__acquires(lock);
+void __lockfunc _spin_lock_nest_lock(spinlock_t *lock, struct lockdep_map *map)
+							__acquires(lock);
 void __lockfunc _read_lock(rwlock_t *lock)		__acquires(lock);
 void __lockfunc _write_lock(rwlock_t *lock)		__acquires(lock);
 void __lockfunc _spin_lock_bh(spinlock_t *lock)		__acquires(lock);
diff --git a/include/linux/ssb/ssb.h b/include/linux/ssb/ssb.h
index 4bf8cade9dbc..e530026eedf7 100644
--- a/include/linux/ssb/ssb.h
+++ b/include/linux/ssb/ssb.h
@@ -427,9 +427,9 @@ static inline int ssb_dma_mapping_error(struct ssb_device *dev, dma_addr_t addr)
 {
 	switch (dev->bus->bustype) {
 	case SSB_BUSTYPE_PCI:
-		return pci_dma_mapping_error(addr);
+		return pci_dma_mapping_error(dev->bus->host_pci, addr);
 	case SSB_BUSTYPE_SSB:
-		return dma_mapping_error(addr);
+		return dma_mapping_error(dev->dev, addr);
 	default:
 		__ssb_dma_not_implemented(dev);
 	}
diff --git a/include/linux/stop_machine.h b/include/linux/stop_machine.h
index 5bfc553bdb21..faf1519b5adc 100644
--- a/include/linux/stop_machine.h
+++ b/include/linux/stop_machine.h
@@ -3,43 +3,42 @@
 /* "Bogolock": stop the entire machine, disable interrupts.  This is a
    very heavy lock, which is equivalent to grabbing every spinlock
    (and more).  So the "read" side to such a lock is anything which
-   diables preeempt. */
+   disables preeempt. */
 #include <linux/cpu.h>
+#include <linux/cpumask.h>
 #include <asm/system.h>
 
 #if defined(CONFIG_STOP_MACHINE) && defined(CONFIG_SMP)
+
 /**
- * stop_machine_run: freeze the machine on all CPUs and run this function
+ * stop_machine: freeze the machine on all CPUs and run this function
  * @fn: the function to run
  * @data: the data ptr for the @fn()
- * @cpu: the cpu to run @fn() on (or any, if @cpu == NR_CPUS.
+ * @cpus: the cpus to run the @fn() on (NULL = any online cpu)
  *
- * Description: This causes a thread to be scheduled on every other cpu,
- * each of which disables interrupts, and finally interrupts are disabled
- * on the current CPU.  The result is that noone is holding a spinlock
- * or inside any other preempt-disabled region when @fn() runs.
+ * Description: This causes a thread to be scheduled on every cpu,
+ * each of which disables interrupts.  The result is that noone is
+ * holding a spinlock or inside any other preempt-disabled region when
+ * @fn() runs.
  *
  * This can be thought of as a very heavy write lock, equivalent to
  * grabbing every spinlock in the kernel. */
-int stop_machine_run(int (*fn)(void *), void *data, unsigned int cpu);
+int stop_machine(int (*fn)(void *), void *data, const cpumask_t *cpus);
 
 /**
- * __stop_machine_run: freeze the machine on all CPUs and run this function
+ * __stop_machine: freeze the machine on all CPUs and run this function
  * @fn: the function to run
  * @data: the data ptr for the @fn
- * @cpu: the cpu to run @fn on (or any, if @cpu == NR_CPUS.
+ * @cpus: the cpus to run the @fn() on (NULL = any online cpu)
  *
- * Description: This is a special version of the above, which returns the
- * thread which has run @fn(): kthread_stop will return the return value
- * of @fn().  Used by hotplug cpu.
+ * Description: This is a special version of the above, which assumes cpus
+ * won't come or go while it's being called.  Used by hotplug cpu.
  */
-struct task_struct *__stop_machine_run(int (*fn)(void *), void *data,
-				       unsigned int cpu);
-
+int __stop_machine(int (*fn)(void *), void *data, const cpumask_t *cpus);
 #else
 
-static inline int stop_machine_run(int (*fn)(void *), void *data,
-				   unsigned int cpu)
+static inline int stop_machine(int (*fn)(void *), void *data,
+			       const cpumask_t *cpus)
 {
 	int ret;
 	local_irq_disable();
diff --git a/include/linux/sunrpc/svc_rdma.h b/include/linux/sunrpc/svc_rdma.h
index ef2e3a20bf3b..dc05b54bd3a3 100644
--- a/include/linux/sunrpc/svc_rdma.h
+++ b/include/linux/sunrpc/svc_rdma.h
@@ -143,7 +143,6 @@ struct svcxprt_rdma {
 	unsigned long	     sc_flags;
 	struct list_head     sc_dto_q;		/* DTO tasklet I/O pending Q */
 	struct list_head     sc_read_complete_q;
-	spinlock_t           sc_read_complete_lock;
 	struct work_struct   sc_work;
 };
 /* sc_flags */
diff --git a/include/linux/suspend.h b/include/linux/suspend.h
index e8e69159af71..2ce8207686e2 100644
--- a/include/linux/suspend.h
+++ b/include/linux/suspend.h
@@ -217,11 +217,11 @@ struct platform_hibernation_ops {
 #ifdef CONFIG_HIBERNATION
 /* kernel/power/snapshot.c */
 extern void __register_nosave_region(unsigned long b, unsigned long e, int km);
-static inline void register_nosave_region(unsigned long b, unsigned long e)
+static inline void __init register_nosave_region(unsigned long b, unsigned long e)
 {
 	__register_nosave_region(b, e, 0);
 }
-static inline void register_nosave_region_late(unsigned long b, unsigned long e)
+static inline void __init register_nosave_region_late(unsigned long b, unsigned long e)
 {
 	__register_nosave_region(b, e, 1);
 }
@@ -278,4 +278,6 @@ static inline void register_nosave_region_late(unsigned long b, unsigned long e)
 }
 #endif
 
+extern struct mutex pm_mutex;
+
 #endif /* _LINUX_SUSPEND_H */
diff --git a/include/linux/swab.h b/include/linux/swab.h
new file mode 100644
index 000000000000..270d5c208a89
--- /dev/null
+++ b/include/linux/swab.h
@@ -0,0 +1,309 @@
+#ifndef _LINUX_SWAB_H
+#define _LINUX_SWAB_H
+
+#include <linux/types.h>
+#include <linux/compiler.h>
+#include <asm/byteorder.h>
+
+/*
+ * casts are necessary for constants, because we never know how for sure
+ * how U/UL/ULL map to __u16, __u32, __u64. At least not in a portable way.
+ */
+#define __const_swab16(x) ((__u16)(				\
+	(((__u16)(x) & (__u16)0x00ffU) << 8) |			\
+	(((__u16)(x) & (__u16)0xff00U) >> 8)))
+
+#define __const_swab32(x) ((__u32)(				\
+	(((__u32)(x) & (__u32)0x000000ffUL) << 24) |		\
+	(((__u32)(x) & (__u32)0x0000ff00UL) <<  8) |		\
+	(((__u32)(x) & (__u32)0x00ff0000UL) >>  8) |		\
+	(((__u32)(x) & (__u32)0xff000000UL) >> 24)))
+
+#define __const_swab64(x) ((__u64)(				\
+	(((__u64)(x) & (__u64)0x00000000000000ffULL) << 56) |	\
+	(((__u64)(x) & (__u64)0x000000000000ff00ULL) << 40) |	\
+	(((__u64)(x) & (__u64)0x0000000000ff0000ULL) << 24) |	\
+	(((__u64)(x) & (__u64)0x00000000ff000000ULL) <<  8) |	\
+	(((__u64)(x) & (__u64)0x000000ff00000000ULL) >>  8) |	\
+	(((__u64)(x) & (__u64)0x0000ff0000000000ULL) >> 24) |	\
+	(((__u64)(x) & (__u64)0x00ff000000000000ULL) >> 40) |	\
+	(((__u64)(x) & (__u64)0xff00000000000000ULL) >> 56)))
+
+#define __const_swahw32(x) ((__u32)(				\
+	(((__u32)(x) & (__u32)0x0000ffffUL) << 16) |		\
+	(((__u32)(x) & (__u32)0xffff0000UL) >> 16)))
+
+#define __const_swahb32(x) ((__u32)(				\
+	(((__u32)(x) & (__u32)0x00ff00ffUL) << 8) |		\
+	(((__u32)(x) & (__u32)0xff00ff00UL) >> 8)))
+
+/*
+ * Implement the following as inlines, but define the interface using
+ * macros to allow constant folding when possible:
+ * ___swab16, ___swab32, ___swab64, ___swahw32, ___swahb32
+ */
+
+static inline __attribute_const__ __u16 ___swab16(__u16 val)
+{
+#ifdef __arch_swab16
+	return __arch_swab16(val);
+#elif defined(__arch_swab16p)
+	return __arch_swab16p(&val);
+#else
+	return __const_swab16(val);
+#endif
+}
+
+static inline __attribute_const__ __u32 ___swab32(__u32 val)
+{
+#ifdef __arch_swab32
+	return __arch_swab32(val);
+#elif defined(__arch_swab32p)
+	return __arch_swab32p(&val);
+#else
+	return __const_swab32(val);
+#endif
+}
+
+static inline __attribute_const__ __u64 ___swab64(__u64 val)
+{
+#ifdef __arch_swab64
+	return __arch_swab64(val);
+#elif defined(__arch_swab64p)
+	return __arch_swab64p(&val);
+#elif defined(__SWAB_64_THRU_32__)
+	__u32 h = val >> 32;
+	__u32 l = val & ((1ULL << 32) - 1);
+	return (((__u64)___swab32(l)) << 32) | ((__u64)(___swab32(h)));
+#else
+	return __const_swab64(val);
+#endif
+}
+
+static inline __attribute_const__ __u32 ___swahw32(__u32 val)
+{
+#ifdef __arch_swahw32
+	return __arch_swahw32(val);
+#elif defined(__arch_swahw32p)
+	return __arch_swahw32p(&val);
+#else
+	return __const_swahw32(val);
+#endif
+}
+
+static inline __attribute_const__ __u32 ___swahb32(__u32 val)
+{
+#ifdef __arch_swahb32
+	return __arch_swahb32(val);
+#elif defined(__arch_swahb32p)
+	return __arch_swahb32p(&val);
+#else
+	return __const_swahb32(val);
+#endif
+}
+
+/**
+ * __swab16 - return a byteswapped 16-bit value
+ * @x: value to byteswap
+ */
+#define __swab16(x)				\
+	(__builtin_constant_p((__u16)(x)) ?	\
+	__const_swab16((x)) :			\
+	___swab16((x)))
+
+/**
+ * __swab32 - return a byteswapped 32-bit value
+ * @x: value to byteswap
+ */
+#define __swab32(x)				\
+	(__builtin_constant_p((__u32)(x)) ?	\
+	__const_swab32((x)) :			\
+	___swab32((x)))
+
+/**
+ * __swab64 - return a byteswapped 64-bit value
+ * @x: value to byteswap
+ */
+#define __swab64(x)				\
+	(__builtin_constant_p((__u64)(x)) ?	\
+	__const_swab64((x)) :			\
+	___swab64((x)))
+
+/**
+ * __swahw32 - return a word-swapped 32-bit value
+ * @x: value to wordswap
+ *
+ * __swahw32(0x12340000) is 0x00001234
+ */
+#define __swahw32(x)				\
+	(__builtin_constant_p((__u32)(x)) ?	\
+	__const_swahw32((x)) :			\
+	___swahw32((x)))
+
+/**
+ * __swahb32 - return a high and low byte-swapped 32-bit value
+ * @x: value to byteswap
+ *
+ * __swahb32(0x12345678) is 0x34127856
+ */
+#define __swahb32(x)				\
+	(__builtin_constant_p((__u32)(x)) ?	\
+	__const_swahb32((x)) :			\
+	___swahb32((x)))
+
+/**
+ * __swab16p - return a byteswapped 16-bit value from a pointer
+ * @p: pointer to a naturally-aligned 16-bit value
+ */
+static inline __u16 __swab16p(const __u16 *p)
+{
+#ifdef __arch_swab16p
+	return __arch_swab16p(p);
+#else
+	return __swab16(*p);
+#endif
+}
+
+/**
+ * __swab32p - return a byteswapped 32-bit value from a pointer
+ * @p: pointer to a naturally-aligned 32-bit value
+ */
+static inline __u32 __swab32p(const __u32 *p)
+{
+#ifdef __arch_swab32p
+	return __arch_swab32p(p);
+#else
+	return __swab32(*p);
+#endif
+}
+
+/**
+ * __swab64p - return a byteswapped 64-bit value from a pointer
+ * @p: pointer to a naturally-aligned 64-bit value
+ */
+static inline __u64 __swab64p(const __u64 *p)
+{
+#ifdef __arch_swab64p
+	return __arch_swab64p(p);
+#else
+	return __swab64(*p);
+#endif
+}
+
+/**
+ * __swahw32p - return a wordswapped 32-bit value from a pointer
+ * @p: pointer to a naturally-aligned 32-bit value
+ *
+ * See __swahw32() for details of wordswapping.
+ */
+static inline __u32 __swahw32p(const __u32 *p)
+{
+#ifdef __arch_swahw32p
+	return __arch_swahw32p(p);
+#else
+	return __swahw32(*p);
+#endif
+}
+
+/**
+ * __swahb32p - return a high and low byteswapped 32-bit value from a pointer
+ * @p: pointer to a naturally-aligned 32-bit value
+ *
+ * See __swahb32() for details of high/low byteswapping.
+ */
+static inline __u32 __swahb32p(const __u32 *p)
+{
+#ifdef __arch_swahb32p
+	return __arch_swahb32p(p);
+#else
+	return __swahb32(*p);
+#endif
+}
+
+/**
+ * __swab16s - byteswap a 16-bit value in-place
+ * @p: pointer to a naturally-aligned 16-bit value
+ */
+static inline void __swab16s(__u16 *p)
+{
+#ifdef __arch_swab16s
+	__arch_swab16s(p);
+#else
+	*p = __swab16p(p);
+#endif
+}
+/**
+ * __swab32s - byteswap a 32-bit value in-place
+ * @p: pointer to a naturally-aligned 32-bit value
+ */
+static inline void __swab32s(__u32 *p)
+{
+#ifdef __arch_swab32s
+	__arch_swab32s(p);
+#else
+	*p = __swab32p(p);
+#endif
+}
+
+/**
+ * __swab64s - byteswap a 64-bit value in-place
+ * @p: pointer to a naturally-aligned 64-bit value
+ */
+static inline void __swab64s(__u64 *p)
+{
+#ifdef __arch_swab64s
+	__arch_swab64s(p);
+#else
+	*p = __swab64p(p);
+#endif
+}
+
+/**
+ * __swahw32s - wordswap a 32-bit value in-place
+ * @p: pointer to a naturally-aligned 32-bit value
+ *
+ * See __swahw32() for details of wordswapping
+ */
+static inline void __swahw32s(__u32 *p)
+{
+#ifdef __arch_swahw32s
+	__arch_swahw32s(p);
+#else
+	*p = __swahw32p(p);
+#endif
+}
+
+/**
+ * __swahb32s - high and low byteswap a 32-bit value in-place
+ * @p: pointer to a naturally-aligned 32-bit value
+ *
+ * See __swahb32() for details of high and low byte swapping
+ */
+static inline void __swahb32s(__u32 *p)
+{
+#ifdef __arch_swahb32s
+	__arch_swahb32s(p);
+#else
+	*p = __swahb32p(p);
+#endif
+}
+
+#ifdef __KERNEL__
+# define swab16 __swab16
+# define swab32 __swab32
+# define swab64 __swab64
+# define swahw32 __swahw32
+# define swahb32 __swahb32
+# define swab16p __swab16p
+# define swab32p __swab32p
+# define swab64p __swab64p
+# define swahw32p __swahw32p
+# define swahb32p __swahb32p
+# define swab16s __swab16s
+# define swab32s __swab32s
+# define swab64s __swab64s
+# define swahw32s __swahw32s
+# define swahb32s __swahb32s
+#endif /* __KERNEL__ */
+
+#endif /* _LINUX_SWAB_H */
diff --git a/include/linux/swap.h b/include/linux/swap.h
index 0b3377650c85..de40f169a4e4 100644
--- a/include/linux/swap.h
+++ b/include/linux/swap.h
@@ -237,7 +237,6 @@ extern struct page *swapin_readahead(swp_entry_t, gfp_t,
 
 /* linux/mm/swapfile.c */
 extern long total_swap_pages;
-extern unsigned int nr_swapfiles;
 extern void si_swapinfo(struct sysinfo *);
 extern swp_entry_t get_swap_page(void);
 extern swp_entry_t get_swap_page_of_type(int);
@@ -254,8 +253,6 @@ extern int can_share_swap_page(struct page *);
 extern int remove_exclusive_swap_page(struct page *);
 struct backing_dev_info;
 
-extern spinlock_t swap_lock;
-
 /* linux/mm/thrash.c */
 extern struct mm_struct * swap_token_mm;
 extern void grab_swap_token(void);
diff --git a/include/linux/syscalls.h b/include/linux/syscalls.h
index 06f2bf76c030..d6ff145919ca 100644
--- a/include/linux/syscalls.h
+++ b/include/linux/syscalls.h
@@ -411,7 +411,7 @@ asmlinkage long sys_bind(int, struct sockaddr __user *, int);
 asmlinkage long sys_connect(int, struct sockaddr __user *, int);
 asmlinkage long sys_accept(int, struct sockaddr __user *, int __user *);
 asmlinkage long sys_paccept(int, struct sockaddr __user *, int __user *,
-			    const sigset_t *, size_t, int);
+			    const __user sigset_t *, size_t, int);
 asmlinkage long sys_getsockname(int, struct sockaddr __user *, int __user *);
 asmlinkage long sys_getpeername(int, struct sockaddr __user *, int __user *);
 asmlinkage long sys_send(int, void __user *, size_t, unsigned);
diff --git a/include/linux/sysctl.h b/include/linux/sysctl.h
index 24141b4d1a11..d0437f36921f 100644
--- a/include/linux/sysctl.h
+++ b/include/linux/sysctl.h
@@ -947,6 +947,22 @@ struct ctl_table;
 struct nsproxy;
 struct ctl_table_root;
 
+struct ctl_table_set {
+	struct list_head list;
+	struct ctl_table_set *parent;
+	int (*is_seen)(struct ctl_table_set *);
+};
+
+extern void setup_sysctl_set(struct ctl_table_set *p,
+	struct ctl_table_set *parent,
+	int (*is_seen)(struct ctl_table_set *));
+
+struct ctl_table_header;
+
+extern void sysctl_head_get(struct ctl_table_header *);
+extern void sysctl_head_put(struct ctl_table_header *);
+extern int sysctl_is_seen(struct ctl_table_header *);
+extern struct ctl_table_header *sysctl_head_grab(struct ctl_table_header *);
 extern struct ctl_table_header *sysctl_head_next(struct ctl_table_header *prev);
 extern struct ctl_table_header *__sysctl_head_next(struct nsproxy *namespaces,
 						struct ctl_table_header *prev);
@@ -1049,8 +1065,8 @@ struct ctl_table
 
 struct ctl_table_root {
 	struct list_head root_list;
-	struct list_head header_list;
-	struct list_head *(*lookup)(struct ctl_table_root *root,
+	struct ctl_table_set default_set;
+	struct ctl_table_set *(*lookup)(struct ctl_table_root *root,
 					   struct nsproxy *namespaces);
 	int (*permissions)(struct ctl_table_root *root,
 			struct nsproxy *namespaces, struct ctl_table *table);
@@ -1063,9 +1079,14 @@ struct ctl_table_header
 	struct ctl_table *ctl_table;
 	struct list_head ctl_entry;
 	int used;
+	int count;
 	struct completion *unregistering;
 	struct ctl_table *ctl_table_arg;
 	struct ctl_table_root *root;
+	struct ctl_table_set *set;
+	struct ctl_table *attached_by;
+	struct ctl_table *attached_to;
+	struct ctl_table_header *parent;
 };
 
 /* struct ctl_path describes where in the hierarchy a table is added */
diff --git a/include/linux/task_io_accounting.h b/include/linux/task_io_accounting.h
index 44d00e9cceea..5e88afc9a2fb 100644
--- a/include/linux/task_io_accounting.h
+++ b/include/linux/task_io_accounting.h
@@ -8,8 +8,19 @@
  * Blame akpm@osdl.org for all this.
  */
 
-#ifdef CONFIG_TASK_IO_ACCOUNTING
 struct task_io_accounting {
+#ifdef CONFIG_TASK_XACCT
+	/* bytes read */
+	u64 rchar;
+	/*  bytes written */
+	u64 wchar;
+	/* # of read syscalls */
+	u64 syscr;
+	/* # of write syscalls */
+	u64 syscw;
+#endif /* CONFIG_TASK_XACCT */
+
+#ifdef CONFIG_TASK_IO_ACCOUNTING
 	/*
 	 * The number of bytes which this task has caused to be read from
 	 * storage.
@@ -30,8 +41,5 @@ struct task_io_accounting {
 	 * information loss in doing that.
 	 */
 	u64 cancelled_write_bytes;
+#endif /* CONFIG_TASK_IO_ACCOUNTING */
 };
-#else
-struct task_io_accounting {
-};
-#endif
diff --git a/include/linux/task_io_accounting_ops.h b/include/linux/task_io_accounting_ops.h
index ff46c6fad79d..4d090f9ee608 100644
--- a/include/linux/task_io_accounting_ops.h
+++ b/include/linux/task_io_accounting_ops.h
@@ -40,9 +40,17 @@ static inline void task_io_account_cancelled_write(size_t bytes)
 	current->ioac.cancelled_write_bytes += bytes;
 }
 
-static inline void task_io_accounting_init(struct task_struct *tsk)
+static inline void task_io_accounting_init(struct task_io_accounting *ioac)
 {
-	memset(&tsk->ioac, 0, sizeof(tsk->ioac));
+	memset(ioac, 0, sizeof(*ioac));
+}
+
+static inline void task_blk_io_accounting_add(struct task_io_accounting *dst,
+						struct task_io_accounting *src)
+{
+	dst->read_bytes += src->read_bytes;
+	dst->write_bytes += src->write_bytes;
+	dst->cancelled_write_bytes += src->cancelled_write_bytes;
 }
 
 #else
@@ -69,9 +77,37 @@ static inline void task_io_account_cancelled_write(size_t bytes)
 {
 }
 
-static inline void task_io_accounting_init(struct task_struct *tsk)
+static inline void task_io_accounting_init(struct task_io_accounting *ioac)
+{
+}
+
+static inline void task_blk_io_accounting_add(struct task_io_accounting *dst,
+						struct task_io_accounting *src)
 {
 }
 
-#endif		/* CONFIG_TASK_IO_ACCOUNTING */
-#endif		/* __TASK_IO_ACCOUNTING_OPS_INCLUDED */
+#endif /* CONFIG_TASK_IO_ACCOUNTING */
+
+#ifdef CONFIG_TASK_XACCT
+static inline void task_chr_io_accounting_add(struct task_io_accounting *dst,
+						struct task_io_accounting *src)
+{
+	dst->rchar += src->rchar;
+	dst->wchar += src->wchar;
+	dst->syscr += src->syscr;
+	dst->syscw += src->syscw;
+}
+#else
+static inline void task_chr_io_accounting_add(struct task_io_accounting *dst,
+						struct task_io_accounting *src)
+{
+}
+#endif /* CONFIG_TASK_XACCT */
+
+static inline void task_io_accounting_add(struct task_io_accounting *dst,
+						struct task_io_accounting *src)
+{
+	task_chr_io_accounting_add(dst, src);
+	task_blk_io_accounting_add(dst, src);
+}
+#endif /* __TASK_IO_ACCOUNTING_OPS_INCLUDED */
diff --git a/include/linux/taskstats.h b/include/linux/taskstats.h
index 5d69c0744fff..18269e956a71 100644
--- a/include/linux/taskstats.h
+++ b/include/linux/taskstats.h
@@ -31,7 +31,7 @@
  */
 
 
-#define TASKSTATS_VERSION	6
+#define TASKSTATS_VERSION	7
 #define TS_COMM_LEN		32	/* should be >= TASK_COMM_LEN
 					 * in linux/sched.h */
 
@@ -157,6 +157,10 @@ struct taskstats {
 	__u64	ac_utimescaled;		/* utime scaled on frequency etc */
 	__u64	ac_stimescaled;		/* stime scaled on frequency etc */
 	__u64	cpu_scaled_run_real_total; /* scaled cpu_run_real_total */
+
+	/* Delay waiting for memory reclaim */
+	__u64	freepages_count;
+	__u64	freepages_delay_total;
 };
 
 
diff --git a/include/linux/tick.h b/include/linux/tick.h
index d3c02695dc5d..8cf8cfe2cc97 100644
--- a/include/linux/tick.h
+++ b/include/linux/tick.h
@@ -74,10 +74,13 @@ extern struct tick_device *tick_get_device(int cpu);
 extern int tick_init_highres(void);
 extern int tick_program_event(ktime_t expires, int force);
 extern void tick_setup_sched_timer(void);
+# endif
+
+# if defined CONFIG_NO_HZ || defined CONFIG_HIGH_RES_TIMERS
 extern void tick_cancel_sched_timer(int cpu);
 # else
 static inline void tick_cancel_sched_timer(int cpu) { }
-# endif /* HIGHRES */
+# endif
 
 # ifdef CONFIG_GENERIC_CLOCKEVENTS_BROADCAST
 extern struct tick_device *tick_get_broadcast_device(void);
diff --git a/include/linux/tracehook.h b/include/linux/tracehook.h
new file mode 100644
index 000000000000..b48d81969574
--- /dev/null
+++ b/include/linux/tracehook.h
@@ -0,0 +1,582 @@
+/*
+ * Tracing hooks
+ *
+ * Copyright (C) 2008 Red Hat, Inc.  All rights reserved.
+ *
+ * This copyrighted material is made available to anyone wishing to use,
+ * modify, copy, or redistribute it subject to the terms and conditions
+ * of the GNU General Public License v.2.
+ *
+ * This file defines hook entry points called by core code where
+ * user tracing/debugging support might need to do something.  These
+ * entry points are called tracehook_*().  Each hook declared below
+ * has a detailed kerneldoc comment giving the context (locking et
+ * al) from which it is called, and the meaning of its return value.
+ *
+ * Each function here typically has only one call site, so it is ok
+ * to have some nontrivial tracehook_*() inlines.  In all cases, the
+ * fast path when no tracing is enabled should be very short.
+ *
+ * The purpose of this file and the tracehook_* layer is to consolidate
+ * the interface that the kernel core and arch code uses to enable any
+ * user debugging or tracing facility (such as ptrace).  The interfaces
+ * here are carefully documented so that maintainers of core and arch
+ * code do not need to think about the implementation details of the
+ * tracing facilities.  Likewise, maintainers of the tracing code do not
+ * need to understand all the calling core or arch code in detail, just
+ * documented circumstances of each call, such as locking conditions.
+ *
+ * If the calling core code changes so that locking is different, then
+ * it is ok to change the interface documented here.  The maintainer of
+ * core code changing should notify the maintainers of the tracing code
+ * that they need to work out the change.
+ *
+ * Some tracehook_*() inlines take arguments that the current tracing
+ * implementations might not necessarily use.  These function signatures
+ * are chosen to pass in all the information that is on hand in the
+ * caller and might conceivably be relevant to a tracer, so that the
+ * core code won't have to be updated when tracing adds more features.
+ * If a call site changes so that some of those parameters are no longer
+ * already on hand without extra work, then the tracehook_* interface
+ * can change so there is no make-work burden on the core code.  The
+ * maintainer of core code changing should notify the maintainers of the
+ * tracing code that they need to work out the change.
+ */
+
+#ifndef _LINUX_TRACEHOOK_H
+#define _LINUX_TRACEHOOK_H	1
+
+#include <linux/sched.h>
+#include <linux/ptrace.h>
+#include <linux/security.h>
+struct linux_binprm;
+
+/**
+ * tracehook_expect_breakpoints - guess if task memory might be touched
+ * @task:		current task, making a new mapping
+ *
+ * Return nonzero if @task is expected to want breakpoint insertion in
+ * its memory at some point.  A zero return is no guarantee it won't
+ * be done, but this is a hint that it's known to be likely.
+ *
+ * May be called with @task->mm->mmap_sem held for writing.
+ */
+static inline int tracehook_expect_breakpoints(struct task_struct *task)
+{
+	return (task_ptrace(task) & PT_PTRACED) != 0;
+}
+
+/*
+ * ptrace report for syscall entry and exit looks identical.
+ */
+static inline void ptrace_report_syscall(struct pt_regs *regs)
+{
+	int ptrace = task_ptrace(current);
+
+	if (!(ptrace & PT_PTRACED))
+		return;
+
+	ptrace_notify(SIGTRAP | ((ptrace & PT_TRACESYSGOOD) ? 0x80 : 0));
+
+	/*
+	 * this isn't the same as continuing with a signal, but it will do
+	 * for normal use.  strace only continues with a signal if the
+	 * stopping signal is not SIGTRAP.  -brl
+	 */
+	if (current->exit_code) {
+		send_sig(current->exit_code, current, 1);
+		current->exit_code = 0;
+	}
+}
+
+/**
+ * tracehook_report_syscall_entry - task is about to attempt a system call
+ * @regs:		user register state of current task
+ *
+ * This will be called if %TIF_SYSCALL_TRACE has been set, when the
+ * current task has just entered the kernel for a system call.
+ * Full user register state is available here.  Changing the values
+ * in @regs can affect the system call number and arguments to be tried.
+ * It is safe to block here, preventing the system call from beginning.
+ *
+ * Returns zero normally, or nonzero if the calling arch code should abort
+ * the system call.  That must prevent normal entry so no system call is
+ * made.  If @task ever returns to user mode after this, its register state
+ * is unspecified, but should be something harmless like an %ENOSYS error
+ * return.  It should preserve enough information so that syscall_rollback()
+ * can work (see asm-generic/syscall.h).
+ *
+ * Called without locks, just after entering kernel mode.
+ */
+static inline __must_check int tracehook_report_syscall_entry(
+	struct pt_regs *regs)
+{
+	ptrace_report_syscall(regs);
+	return 0;
+}
+
+/**
+ * tracehook_report_syscall_exit - task has just finished a system call
+ * @regs:		user register state of current task
+ * @step:		nonzero if simulating single-step or block-step
+ *
+ * This will be called if %TIF_SYSCALL_TRACE has been set, when the
+ * current task has just finished an attempted system call.  Full
+ * user register state is available here.  It is safe to block here,
+ * preventing signals from being processed.
+ *
+ * If @step is nonzero, this report is also in lieu of the normal
+ * trap that would follow the system call instruction because
+ * user_enable_block_step() or user_enable_single_step() was used.
+ * In this case, %TIF_SYSCALL_TRACE might not be set.
+ *
+ * Called without locks, just before checking for pending signals.
+ */
+static inline void tracehook_report_syscall_exit(struct pt_regs *regs, int step)
+{
+	ptrace_report_syscall(regs);
+}
+
+/**
+ * tracehook_unsafe_exec - check for exec declared unsafe due to tracing
+ * @task:		current task doing exec
+ *
+ * Return %LSM_UNSAFE_* bits applied to an exec because of tracing.
+ *
+ * Called with task_lock() held on @task.
+ */
+static inline int tracehook_unsafe_exec(struct task_struct *task)
+{
+	int unsafe = 0;
+	int ptrace = task_ptrace(task);
+	if (ptrace & PT_PTRACED) {
+		if (ptrace & PT_PTRACE_CAP)
+			unsafe |= LSM_UNSAFE_PTRACE_CAP;
+		else
+			unsafe |= LSM_UNSAFE_PTRACE;
+	}
+	return unsafe;
+}
+
+/**
+ * tracehook_tracer_task - return the task that is tracing the given task
+ * @tsk:		task to consider
+ *
+ * Returns NULL if noone is tracing @task, or the &struct task_struct
+ * pointer to its tracer.
+ *
+ * Must called under rcu_read_lock().  The pointer returned might be kept
+ * live only by RCU.  During exec, this may be called with task_lock()
+ * held on @task, still held from when tracehook_unsafe_exec() was called.
+ */
+static inline struct task_struct *tracehook_tracer_task(struct task_struct *tsk)
+{
+	if (task_ptrace(tsk) & PT_PTRACED)
+		return rcu_dereference(tsk->parent);
+	return NULL;
+}
+
+/**
+ * tracehook_report_exec - a successful exec was completed
+ * @fmt:		&struct linux_binfmt that performed the exec
+ * @bprm:		&struct linux_binprm containing exec details
+ * @regs:		user-mode register state
+ *
+ * An exec just completed, we are shortly going to return to user mode.
+ * The freshly initialized register state can be seen and changed in @regs.
+ * The name, file and other pointers in @bprm are still on hand to be
+ * inspected, but will be freed as soon as this returns.
+ *
+ * Called with no locks, but with some kernel resources held live
+ * and a reference on @fmt->module.
+ */
+static inline void tracehook_report_exec(struct linux_binfmt *fmt,
+					 struct linux_binprm *bprm,
+					 struct pt_regs *regs)
+{
+	if (!ptrace_event(PT_TRACE_EXEC, PTRACE_EVENT_EXEC, 0) &&
+	    unlikely(task_ptrace(current) & PT_PTRACED))
+		send_sig(SIGTRAP, current, 0);
+}
+
+/**
+ * tracehook_report_exit - task has begun to exit
+ * @exit_code:		pointer to value destined for @current->exit_code
+ *
+ * @exit_code points to the value passed to do_exit(), which tracing
+ * might change here.  This is almost the first thing in do_exit(),
+ * before freeing any resources or setting the %PF_EXITING flag.
+ *
+ * Called with no locks held.
+ */
+static inline void tracehook_report_exit(long *exit_code)
+{
+	ptrace_event(PT_TRACE_EXIT, PTRACE_EVENT_EXIT, *exit_code);
+}
+
+/**
+ * tracehook_prepare_clone - prepare for new child to be cloned
+ * @clone_flags:	%CLONE_* flags from clone/fork/vfork system call
+ *
+ * This is called before a new user task is to be cloned.
+ * Its return value will be passed to tracehook_finish_clone().
+ *
+ * Called with no locks held.
+ */
+static inline int tracehook_prepare_clone(unsigned clone_flags)
+{
+	if (clone_flags & CLONE_UNTRACED)
+		return 0;
+
+	if (clone_flags & CLONE_VFORK) {
+		if (current->ptrace & PT_TRACE_VFORK)
+			return PTRACE_EVENT_VFORK;
+	} else if ((clone_flags & CSIGNAL) != SIGCHLD) {
+		if (current->ptrace & PT_TRACE_CLONE)
+			return PTRACE_EVENT_CLONE;
+	} else if (current->ptrace & PT_TRACE_FORK)
+		return PTRACE_EVENT_FORK;
+
+	return 0;
+}
+
+/**
+ * tracehook_finish_clone - new child created and being attached
+ * @child:		new child task
+ * @clone_flags:	%CLONE_* flags from clone/fork/vfork system call
+ * @trace:		return value from tracehook_prepare_clone()
+ *
+ * This is called immediately after adding @child to its parent's children list.
+ * The @trace value is that returned by tracehook_prepare_clone().
+ *
+ * Called with current's siglock and write_lock_irq(&tasklist_lock) held.
+ */
+static inline void tracehook_finish_clone(struct task_struct *child,
+					  unsigned long clone_flags, int trace)
+{
+	ptrace_init_task(child, (clone_flags & CLONE_PTRACE) || trace);
+}
+
+/**
+ * tracehook_report_clone - in parent, new child is about to start running
+ * @trace:		return value from tracehook_prepare_clone()
+ * @regs:		parent's user register state
+ * @clone_flags:	flags from parent's system call
+ * @pid:		new child's PID in the parent's namespace
+ * @child:		new child task
+ *
+ * Called after a child is set up, but before it has been started
+ * running.  @trace is the value returned by tracehook_prepare_clone().
+ * This is not a good place to block, because the child has not started
+ * yet.  Suspend the child here if desired, and then block in
+ * tracehook_report_clone_complete().  This must prevent the child from
+ * self-reaping if tracehook_report_clone_complete() uses the @child
+ * pointer; otherwise it might have died and been released by the time
+ * tracehook_report_report_clone_complete() is called.
+ *
+ * Called with no locks held, but the child cannot run until this returns.
+ */
+static inline void tracehook_report_clone(int trace, struct pt_regs *regs,
+					  unsigned long clone_flags,
+					  pid_t pid, struct task_struct *child)
+{
+	if (unlikely(trace) || unlikely(clone_flags & CLONE_PTRACE)) {
+		/*
+		 * The child starts up with an immediate SIGSTOP.
+		 */
+		sigaddset(&child->pending.signal, SIGSTOP);
+		set_tsk_thread_flag(child, TIF_SIGPENDING);
+	}
+}
+
+/**
+ * tracehook_report_clone_complete - new child is running
+ * @trace:		return value from tracehook_prepare_clone()
+ * @regs:		parent's user register state
+ * @clone_flags:	flags from parent's system call
+ * @pid:		new child's PID in the parent's namespace
+ * @child:		child task, already running
+ *
+ * This is called just after the child has started running.  This is
+ * just before the clone/fork syscall returns, or blocks for vfork
+ * child completion if @clone_flags has the %CLONE_VFORK bit set.
+ * The @child pointer may be invalid if a self-reaping child died and
+ * tracehook_report_clone() took no action to prevent it from self-reaping.
+ *
+ * Called with no locks held.
+ */
+static inline void tracehook_report_clone_complete(int trace,
+						   struct pt_regs *regs,
+						   unsigned long clone_flags,
+						   pid_t pid,
+						   struct task_struct *child)
+{
+	if (unlikely(trace))
+		ptrace_event(0, trace, pid);
+}
+
+/**
+ * tracehook_report_vfork_done - vfork parent's child has exited or exec'd
+ * @child:		child task, already running
+ * @pid:		new child's PID in the parent's namespace
+ *
+ * Called after a %CLONE_VFORK parent has waited for the child to complete.
+ * The clone/vfork system call will return immediately after this.
+ * The @child pointer may be invalid if a self-reaping child died and
+ * tracehook_report_clone() took no action to prevent it from self-reaping.
+ *
+ * Called with no locks held.
+ */
+static inline void tracehook_report_vfork_done(struct task_struct *child,
+					       pid_t pid)
+{
+	ptrace_event(PT_TRACE_VFORK_DONE, PTRACE_EVENT_VFORK_DONE, pid);
+}
+
+/**
+ * tracehook_prepare_release_task - task is being reaped, clean up tracing
+ * @task:		task in %EXIT_DEAD state
+ *
+ * This is called in release_task() just before @task gets finally reaped
+ * and freed.  This would be the ideal place to remove and clean up any
+ * tracing-related state for @task.
+ *
+ * Called with no locks held.
+ */
+static inline void tracehook_prepare_release_task(struct task_struct *task)
+{
+}
+
+/**
+ * tracehook_finish_release_task - final tracing clean-up
+ * @task:		task in %EXIT_DEAD state
+ *
+ * This is called in release_task() when @task is being in the middle of
+ * being reaped.  After this, there must be no tracing entanglements.
+ *
+ * Called with write_lock_irq(&tasklist_lock) held.
+ */
+static inline void tracehook_finish_release_task(struct task_struct *task)
+{
+	ptrace_release_task(task);
+}
+
+/**
+ * tracehook_signal_handler - signal handler setup is complete
+ * @sig:		number of signal being delivered
+ * @info:		siginfo_t of signal being delivered
+ * @ka:			sigaction setting that chose the handler
+ * @regs:		user register state
+ * @stepping:		nonzero if debugger single-step or block-step in use
+ *
+ * Called by the arch code after a signal handler has been set up.
+ * Register and stack state reflects the user handler about to run.
+ * Signal mask changes have already been made.
+ *
+ * Called without locks, shortly before returning to user mode
+ * (or handling more signals).
+ */
+static inline void tracehook_signal_handler(int sig, siginfo_t *info,
+					    const struct k_sigaction *ka,
+					    struct pt_regs *regs, int stepping)
+{
+	if (stepping)
+		ptrace_notify(SIGTRAP);
+}
+
+/**
+ * tracehook_consider_ignored_signal - suppress short-circuit of ignored signal
+ * @task:		task receiving the signal
+ * @sig:		signal number being sent
+ * @handler:		%SIG_IGN or %SIG_DFL
+ *
+ * Return zero iff tracing doesn't care to examine this ignored signal,
+ * so it can short-circuit normal delivery and never even get queued.
+ * Either @handler is %SIG_DFL and @sig's default is ignore, or it's %SIG_IGN.
+ *
+ * Called with @task->sighand->siglock held.
+ */
+static inline int tracehook_consider_ignored_signal(struct task_struct *task,
+						    int sig,
+						    void __user *handler)
+{
+	return (task_ptrace(task) & PT_PTRACED) != 0;
+}
+
+/**
+ * tracehook_consider_fatal_signal - suppress special handling of fatal signal
+ * @task:		task receiving the signal
+ * @sig:		signal number being sent
+ * @handler:		%SIG_DFL or %SIG_IGN
+ *
+ * Return nonzero to prevent special handling of this termination signal.
+ * Normally @handler is %SIG_DFL.  It can be %SIG_IGN if @sig is ignored,
+ * in which case force_sig() is about to reset it to %SIG_DFL.
+ * When this returns zero, this signal might cause a quick termination
+ * that does not give the debugger a chance to intercept the signal.
+ *
+ * Called with or without @task->sighand->siglock held.
+ */
+static inline int tracehook_consider_fatal_signal(struct task_struct *task,
+						  int sig,
+						  void __user *handler)
+{
+	return (task_ptrace(task) & PT_PTRACED) != 0;
+}
+
+/**
+ * tracehook_force_sigpending - let tracing force signal_pending(current) on
+ *
+ * Called when recomputing our signal_pending() flag.  Return nonzero
+ * to force the signal_pending() flag on, so that tracehook_get_signal()
+ * will be called before the next return to user mode.
+ *
+ * Called with @current->sighand->siglock held.
+ */
+static inline int tracehook_force_sigpending(void)
+{
+	return 0;
+}
+
+/**
+ * tracehook_get_signal - deliver synthetic signal to traced task
+ * @task:		@current
+ * @regs:		task_pt_regs(@current)
+ * @info:		details of synthetic signal
+ * @return_ka:		sigaction for synthetic signal
+ *
+ * Return zero to check for a real pending signal normally.
+ * Return -1 after releasing the siglock to repeat the check.
+ * Return a signal number to induce an artifical signal delivery,
+ * setting *@info and *@return_ka to specify its details and behavior.
+ *
+ * The @return_ka->sa_handler value controls the disposition of the
+ * signal, no matter the signal number.  For %SIG_DFL, the return value
+ * is a representative signal to indicate the behavior (e.g. %SIGTERM
+ * for death, %SIGQUIT for core dump, %SIGSTOP for job control stop,
+ * %SIGTSTP for stop unless in an orphaned pgrp), but the signal number
+ * reported will be @info->si_signo instead.
+ *
+ * Called with @task->sighand->siglock held, before dequeuing pending signals.
+ */
+static inline int tracehook_get_signal(struct task_struct *task,
+				       struct pt_regs *regs,
+				       siginfo_t *info,
+				       struct k_sigaction *return_ka)
+{
+	return 0;
+}
+
+/**
+ * tracehook_notify_jctl - report about job control stop/continue
+ * @notify:		nonzero if this is the last thread in the group to stop
+ * @why:		%CLD_STOPPED or %CLD_CONTINUED
+ *
+ * This is called when we might call do_notify_parent_cldstop().
+ * It's called when about to stop for job control; we are already in
+ * %TASK_STOPPED state, about to call schedule().  It's also called when
+ * a delayed %CLD_STOPPED or %CLD_CONTINUED report is ready to be made.
+ *
+ * Return nonzero to generate a %SIGCHLD with @why, which is
+ * normal if @notify is nonzero.
+ *
+ * Called with no locks held.
+ */
+static inline int tracehook_notify_jctl(int notify, int why)
+{
+	return notify || (current->ptrace & PT_PTRACED);
+}
+
+#define DEATH_REAP			-1
+#define DEATH_DELAYED_GROUP_LEADER	-2
+
+/**
+ * tracehook_notify_death - task is dead, ready to notify parent
+ * @task:		@current task now exiting
+ * @death_cookie:	value to pass to tracehook_report_death()
+ * @group_dead:		nonzero if this was the last thread in the group to die
+ *
+ * A return value >= 0 means call do_notify_parent() with that signal
+ * number.  Negative return value can be %DEATH_REAP to self-reap right
+ * now, or %DEATH_DELAYED_GROUP_LEADER to a zombie without notifying our
+ * parent.  Note that a return value of 0 means a do_notify_parent() call
+ * that sends no signal, but still wakes up a parent blocked in wait*().
+ *
+ * Called with write_lock_irq(&tasklist_lock) held.
+ */
+static inline int tracehook_notify_death(struct task_struct *task,
+					 void **death_cookie, int group_dead)
+{
+	if (task->exit_signal == -1)
+		return task->ptrace ? SIGCHLD : DEATH_REAP;
+
+	/*
+	 * If something other than our normal parent is ptracing us, then
+	 * send it a SIGCHLD instead of honoring exit_signal.  exit_signal
+	 * only has special meaning to our real parent.
+	 */
+	if (thread_group_empty(task) && !ptrace_reparented(task))
+		return task->exit_signal;
+
+	return task->ptrace ? SIGCHLD : DEATH_DELAYED_GROUP_LEADER;
+}
+
+/**
+ * tracehook_report_death - task is dead and ready to be reaped
+ * @task:		@current task now exiting
+ * @signal:		return value from tracheook_notify_death()
+ * @death_cookie:	value passed back from tracehook_notify_death()
+ * @group_dead:		nonzero if this was the last thread in the group to die
+ *
+ * Thread has just become a zombie or is about to self-reap.  If positive,
+ * @signal is the signal number just sent to the parent (usually %SIGCHLD).
+ * If @signal is %DEATH_REAP, this thread will self-reap.  If @signal is
+ * %DEATH_DELAYED_GROUP_LEADER, this is a delayed_group_leader() zombie.
+ * The @death_cookie was passed back by tracehook_notify_death().
+ *
+ * If normal reaping is not inhibited, @task->exit_state might be changing
+ * in parallel.
+ *
+ * Called without locks.
+ */
+static inline void tracehook_report_death(struct task_struct *task,
+					  int signal, void *death_cookie,
+					  int group_dead)
+{
+}
+
+#ifdef TIF_NOTIFY_RESUME
+/**
+ * set_notify_resume - cause tracehook_notify_resume() to be called
+ * @task:		task that will call tracehook_notify_resume()
+ *
+ * Calling this arranges that @task will call tracehook_notify_resume()
+ * before returning to user mode.  If it's already running in user mode,
+ * it will enter the kernel and call tracehook_notify_resume() soon.
+ * If it's blocked, it will not be woken.
+ */
+static inline void set_notify_resume(struct task_struct *task)
+{
+	if (!test_and_set_tsk_thread_flag(task, TIF_NOTIFY_RESUME))
+		kick_process(task);
+}
+
+/**
+ * tracehook_notify_resume - report when about to return to user mode
+ * @regs:		user-mode registers of @current task
+ *
+ * This is called when %TIF_NOTIFY_RESUME has been set.  Now we are
+ * about to return to user mode, and the user state in @regs can be
+ * inspected or adjusted.  The caller in arch code has cleared
+ * %TIF_NOTIFY_RESUME before the call.  If the flag gets set again
+ * asynchronously, this will be called again before we return to
+ * user mode.
+ *
+ * Called without locks.
+ */
+static inline void tracehook_notify_resume(struct pt_regs *regs)
+{
+}
+#endif	/* TIF_NOTIFY_RESUME */
+
+#endif	/* <linux/tracehook.h> */
diff --git a/include/linux/tty.h b/include/linux/tty.h
index e3579cb086e0..0cbec74ec086 100644
--- a/include/linux/tty.h
+++ b/include/linux/tty.h
@@ -331,6 +331,8 @@ extern int tty_write_room(struct tty_struct *tty);
 extern void tty_driver_flush_buffer(struct tty_struct *tty);
 extern void tty_throttle(struct tty_struct *tty);
 extern void tty_unthrottle(struct tty_struct *tty);
+extern int tty_do_resize(struct tty_struct *tty, struct tty_struct *real_tty,
+						struct winsize *ws);
 
 extern int is_current_pgrp_orphaned(void);
 extern struct pid *tty_get_pgrp(struct tty_struct *tty);
diff --git a/include/linux/tty_driver.h b/include/linux/tty_driver.h
index e1065ac0d922..16d27944c321 100644
--- a/include/linux/tty_driver.h
+++ b/include/linux/tty_driver.h
@@ -168,6 +168,18 @@
  *
  *	Optional: If not provided then the write method is called under
  *	the atomic write lock to keep it serialized with the ldisc.
+ *
+ * int (*resize)(struct tty_struct *tty, struct tty_struct *real_tty,
+ *				unsigned int rows, unsigned int cols);
+ *
+ *	Called when a termios request is issued which changes the
+ *	requested terminal geometry.
+ *
+ *	Optional: the default action is to update the termios structure
+ *	without error. This is usually the correct behaviour. Drivers should
+ *	not force errors here if they are not resizable objects (eg a serial
+ *	line). See tty_do_resize() if you need to wrap the standard method
+ *	in your own logic - the usual case.
  */
 
 #include <linux/fs.h>
@@ -206,6 +218,8 @@ struct tty_operations {
 	int (*tiocmget)(struct tty_struct *tty, struct file *file);
 	int (*tiocmset)(struct tty_struct *tty, struct file *file,
 			unsigned int set, unsigned int clear);
+	int (*resize)(struct tty_struct *tty, struct tty_struct *real_tty,
+				struct winsize *ws);
 #ifdef CONFIG_CONSOLE_POLL
 	int (*poll_init)(struct tty_driver *driver, int line, char *options);
 	int (*poll_get_char)(struct tty_driver *driver, int line);
diff --git a/include/linux/typecheck.h b/include/linux/typecheck.h
new file mode 100644
index 000000000000..eb5b74a575be
--- /dev/null
+++ b/include/linux/typecheck.h
@@ -0,0 +1,24 @@
+#ifndef TYPECHECK_H_INCLUDED
+#define TYPECHECK_H_INCLUDED
+
+/*
+ * Check at compile time that something is of a particular type.
+ * Always evaluates to 1 so you may use it easily in comparisons.
+ */
+#define typecheck(type,x) \
+({	type __dummy; \
+	typeof(x) __dummy2; \
+	(void)(&__dummy == &__dummy2); \
+	1; \
+})
+
+/*
+ * Check at compile time that 'function' is a certain type, or is a pointer
+ * to that type (needs to use typedef for the function type.)
+ */
+#define typecheck_fn(type,function) \
+({	typeof(type) __tmp = function; \
+	(void)__tmp; \
+})
+
+#endif		/* TYPECHECK_H_INCLUDED */
diff --git a/include/linux/usb.h b/include/linux/usb.h
index 5811c5da69f9..94ac74aba6b6 100644
--- a/include/linux/usb.h
+++ b/include/linux/usb.h
@@ -110,6 +110,10 @@ enum usb_interface_condition {
  * @sysfs_files_created: sysfs attributes exist
  * @needs_remote_wakeup: flag set when the driver requires remote-wakeup
  *	capability during autosuspend.
+ * @needs_altsetting0: flag set when a set-interface request for altsetting 0
+ *	has been deferred.
+ * @needs_binding: flag set when the driver should be re-probed or unbound
+ *	following a reset or suspend operation it doesn't support.
  * @dev: driver model's view of this device
  * @usb_dev: if an interface is bound to the USB major, this will point
  *	to the sysfs representation for that device.
@@ -160,6 +164,7 @@ struct usb_interface {
 	unsigned is_active:1;		/* the interface is not suspended */
 	unsigned sysfs_files_created:1;	/* the sysfs attributes exist */
 	unsigned needs_remote_wakeup:1;	/* driver requires remote wakeup */
+	unsigned needs_altsetting0:1;	/* switch to altsetting 0 is pending */
 	unsigned needs_binding:1;	/* needs delayed unbind/rebind */
 
 	struct device dev;		/* interface specific device info */
diff --git a/include/linux/usb/composite.h b/include/linux/usb/composite.h
index 747c3a49cdc9..c932390c6da0 100644
--- a/include/linux/usb/composite.h
+++ b/include/linux/usb/composite.h
@@ -330,7 +330,7 @@ extern int usb_string_id(struct usb_composite_dev *c);
 	dev_vdbg(&(d)->gadget->dev , fmt , ## args)
 #define ERROR(d, fmt, args...) \
 	dev_err(&(d)->gadget->dev , fmt , ## args)
-#define WARN(d, fmt, args...) \
+#define WARNING(d, fmt, args...) \
 	dev_warn(&(d)->gadget->dev , fmt , ## args)
 #define INFO(d, fmt, args...) \
 	dev_info(&(d)->gadget->dev , fmt , ## args)
diff --git a/include/linux/usb/musb.h b/include/linux/usb/musb.h
new file mode 100644
index 000000000000..630962c04ca4
--- /dev/null
+++ b/include/linux/usb/musb.h
@@ -0,0 +1,98 @@
+/*
+ * This is used to for host and peripheral modes of the driver for
+ * Inventra (Multidrop) Highspeed Dual-Role Controllers:  (M)HDRC.
+ *
+ * Board initialization should put one of these into dev->platform_data,
+ * probably on some platform_device named "musb_hdrc".  It encapsulates
+ * key configuration differences between boards.
+ */
+
+/* The USB role is defined by the connector used on the board, so long as
+ * standards are being followed.  (Developer boards sometimes won't.)
+ */
+enum musb_mode {
+	MUSB_UNDEFINED = 0,
+	MUSB_HOST,		/* A or Mini-A connector */
+	MUSB_PERIPHERAL,	/* B or Mini-B connector */
+	MUSB_OTG		/* Mini-AB connector */
+};
+
+struct clk;
+
+struct musb_hdrc_eps_bits {
+	const char	name[16];
+	u8		bits;
+};
+
+struct musb_hdrc_config {
+	/* MUSB configuration-specific details */
+	unsigned	multipoint:1;	/* multipoint device */
+	unsigned	dyn_fifo:1;	/* supports dynamic fifo sizing */
+	unsigned	soft_con:1;	/* soft connect required */
+	unsigned	utm_16:1;	/* utm data witdh is 16 bits */
+	unsigned	big_endian:1;	/* true if CPU uses big-endian */
+	unsigned	mult_bulk_tx:1;	/* Tx ep required for multbulk pkts */
+	unsigned	mult_bulk_rx:1;	/* Rx ep required for multbulk pkts */
+	unsigned	high_iso_tx:1;	/* Tx ep required for HB iso */
+	unsigned	high_iso_rx:1;	/* Rx ep required for HD iso */
+	unsigned	dma:1;		/* supports DMA */
+	unsigned	vendor_req:1;	/* vendor registers required */
+
+	u8		num_eps;	/* number of endpoints _with_ ep0 */
+	u8		dma_channels;	/* number of dma channels */
+	u8		dyn_fifo_size;	/* dynamic size in bytes */
+	u8		vendor_ctrl;	/* vendor control reg width */
+	u8		vendor_stat;	/* vendor status reg witdh */
+	u8		dma_req_chan;	/* bitmask for required dma channels */
+	u8		ram_bits;	/* ram address size */
+
+	struct musb_hdrc_eps_bits *eps_bits;
+};
+
+struct musb_hdrc_platform_data {
+	/* MUSB_HOST, MUSB_PERIPHERAL, or MUSB_OTG */
+	u8		mode;
+
+	/* for clk_get() */
+	const char	*clock;
+
+	/* (HOST or OTG) switch VBUS on/off */
+	int		(*set_vbus)(struct device *dev, int is_on);
+
+	/* (HOST or OTG) mA/2 power supplied on (default = 8mA) */
+	u8		power;
+
+	/* (PERIPHERAL) mA/2 max power consumed (default = 100mA) */
+	u8		min_power;
+
+	/* (HOST or OTG) msec/2 after VBUS on till power good */
+	u8		potpgt;
+
+	/* Power the device on or off */
+	int		(*set_power)(int state);
+
+	/* Turn device clock on or off */
+	int		(*set_clock)(struct clk *clock, int is_on);
+
+	/* MUSB configuration-specific details */
+	struct musb_hdrc_config	*config;
+};
+
+
+/* TUSB 6010 support */
+
+#define	TUSB6010_OSCCLK_60	16667	/* psec/clk @ 60.0 MHz */
+#define	TUSB6010_REFCLK_24	41667	/* psec/clk @ 24.0 MHz XI */
+#define	TUSB6010_REFCLK_19	52083	/* psec/clk @ 19.2 MHz CLKIN */
+
+#ifdef	CONFIG_ARCH_OMAP2
+
+extern int __init tusb6010_setup_interface(
+		struct musb_hdrc_platform_data *data,
+		unsigned ps_refclk, unsigned waitpin,
+		unsigned async_cs, unsigned sync_cs,
+		unsigned irq, unsigned dmachan);
+
+extern int tusb6010_platform_retime(unsigned is_refclk);
+
+#endif	/* OMAP2 */
diff --git a/include/linux/usb/serial.h b/include/linux/usb/serial.h
index 09a3e6a7518f..655341d0f534 100644
--- a/include/linux/usb/serial.h
+++ b/include/linux/usb/serial.h
@@ -17,7 +17,8 @@
 #include <linux/mutex.h>
 
 #define SERIAL_TTY_MAJOR	188	/* Nice legal number now */
-#define SERIAL_TTY_MINORS	255	/* loads of devices :) */
+#define SERIAL_TTY_MINORS	254	/* loads of devices :) */
+#define SERIAL_TTY_NO_MINOR	255	/* No minor was assigned */
 
 /* The maximum number of ports one device can grab at once */
 #define MAX_NUM_PORTS		8
diff --git a/include/linux/videodev.h b/include/linux/videodev.h
index 9385a566aed8..15a653d41132 100644
--- a/include/linux/videodev.h
+++ b/include/linux/videodev.h
@@ -17,6 +17,21 @@
 
 #if defined(CONFIG_VIDEO_V4L1_COMPAT) || !defined (__KERNEL__)
 
+#define VID_TYPE_CAPTURE	1	/* Can capture */
+#define VID_TYPE_TUNER		2	/* Can tune */
+#define VID_TYPE_TELETEXT	4	/* Does teletext */
+#define VID_TYPE_OVERLAY	8	/* Overlay onto frame buffer */
+#define VID_TYPE_CHROMAKEY	16	/* Overlay by chromakey */
+#define VID_TYPE_CLIPPING	32	/* Can clip */
+#define VID_TYPE_FRAMERAM	64	/* Uses the frame buffer memory */
+#define VID_TYPE_SCALES		128	/* Scalable */
+#define VID_TYPE_MONOCHROME	256	/* Monochrome only */
+#define VID_TYPE_SUBCAPTURE	512	/* Can capture subareas of the image */
+#define VID_TYPE_MPEG_DECODER	1024	/* Can decode MPEG streams */
+#define VID_TYPE_MPEG_ENCODER	2048	/* Can encode MPEG streams */
+#define VID_TYPE_MJPEG_DECODER	4096	/* Can decode MJPEG streams */
+#define VID_TYPE_MJPEG_ENCODER	8192	/* Can encode MJPEG streams */
+
 struct video_capability
 {
 	char name[32];
diff --git a/include/linux/videodev2.h b/include/linux/videodev2.h
index 2e66a95e8d32..e65a6bed4e3e 100644
--- a/include/linux/videodev2.h
+++ b/include/linux/videodev2.h
@@ -55,13 +55,13 @@
  */
 #ifndef __LINUX_VIDEODEV2_H
 #define __LINUX_VIDEODEV2_H
+
 #ifdef __KERNEL__
 #include <linux/time.h>     /* need struct timeval */
-#include <linux/compiler.h> /* need __user */
 #else
-#define __user
 #include <sys/time.h>
 #endif
+#include <linux/compiler.h>
 #include <linux/ioctl.h>
 #include <linux/types.h>
 
@@ -71,6 +71,11 @@
  */
 #define VIDEO_MAX_FRAME               32
 
+#ifndef __KERNEL__
+
+/* These defines are V4L1 specific and should not be used with the V4L2 API!
+   They will be removed from this header in the future. */
+
 #define VID_TYPE_CAPTURE	1	/* Can capture */
 #define VID_TYPE_TUNER		2	/* Can tune */
 #define VID_TYPE_TELETEXT	4	/* Does teletext */
@@ -85,14 +90,15 @@
 #define VID_TYPE_MPEG_ENCODER	2048	/* Can encode MPEG streams */
 #define VID_TYPE_MJPEG_DECODER	4096	/* Can decode MJPEG streams */
 #define VID_TYPE_MJPEG_ENCODER	8192	/* Can encode MJPEG streams */
+#endif
 
 /*
  *	M I S C E L L A N E O U S
  */
 
 /*  Four-character-code (FOURCC) */
-#define v4l2_fourcc(a,b,c,d)\
-	(((__u32)(a)<<0)|((__u32)(b)<<8)|((__u32)(c)<<16)|((__u32)(d)<<24))
+#define v4l2_fourcc(a, b, c, d)\
+	((__u32)(a) | ((__u32)(b) << 8) | ((__u32)(c) << 16) | ((__u32)(d) << 24))
 
 /*
  *	E N U M S
@@ -226,8 +232,7 @@ struct v4l2_fract {
 /*
  *	D R I V E R   C A P A B I L I T I E S
  */
-struct v4l2_capability
-{
+struct v4l2_capability {
 	__u8	driver[16];	/* i.e. "bttv" */
 	__u8	card[32];	/* i.e. "Hauppauge WinTV" */
 	__u8	bus_info[32];	/* "PCI:" + pci_name(pci_dev) */
@@ -259,8 +264,7 @@ struct v4l2_capability
 /*
  *	V I D E O   I M A G E   F O R M A T
  */
-struct v4l2_pix_format
-{
+struct v4l2_pix_format {
 	__u32         		width;
 	__u32			height;
 	__u32			pixelformat;
@@ -272,68 +276,69 @@ struct v4l2_pix_format
 };
 
 /*      Pixel format         FOURCC                        depth  Description  */
-#define V4L2_PIX_FMT_RGB332  v4l2_fourcc('R','G','B','1') /*  8  RGB-3-3-2     */
-#define V4L2_PIX_FMT_RGB444  v4l2_fourcc('R','4','4','4') /* 16  xxxxrrrr ggggbbbb */
-#define V4L2_PIX_FMT_RGB555  v4l2_fourcc('R','G','B','O') /* 16  RGB-5-5-5     */
-#define V4L2_PIX_FMT_RGB565  v4l2_fourcc('R','G','B','P') /* 16  RGB-5-6-5     */
-#define V4L2_PIX_FMT_RGB555X v4l2_fourcc('R','G','B','Q') /* 16  RGB-5-5-5 BE  */
-#define V4L2_PIX_FMT_RGB565X v4l2_fourcc('R','G','B','R') /* 16  RGB-5-6-5 BE  */
-#define V4L2_PIX_FMT_BGR24   v4l2_fourcc('B','G','R','3') /* 24  BGR-8-8-8     */
-#define V4L2_PIX_FMT_RGB24   v4l2_fourcc('R','G','B','3') /* 24  RGB-8-8-8     */
-#define V4L2_PIX_FMT_BGR32   v4l2_fourcc('B','G','R','4') /* 32  BGR-8-8-8-8   */
-#define V4L2_PIX_FMT_RGB32   v4l2_fourcc('R','G','B','4') /* 32  RGB-8-8-8-8   */
-#define V4L2_PIX_FMT_GREY    v4l2_fourcc('G','R','E','Y') /*  8  Greyscale     */
-#define V4L2_PIX_FMT_Y16     v4l2_fourcc('Y','1','6',' ') /* 16  Greyscale     */
-#define V4L2_PIX_FMT_PAL8    v4l2_fourcc('P','A','L','8') /*  8  8-bit palette */
-#define V4L2_PIX_FMT_YVU410  v4l2_fourcc('Y','V','U','9') /*  9  YVU 4:1:0     */
-#define V4L2_PIX_FMT_YVU420  v4l2_fourcc('Y','V','1','2') /* 12  YVU 4:2:0     */
-#define V4L2_PIX_FMT_YUYV    v4l2_fourcc('Y','U','Y','V') /* 16  YUV 4:2:2     */
-#define V4L2_PIX_FMT_UYVY    v4l2_fourcc('U','Y','V','Y') /* 16  YUV 4:2:2     */
-#define V4L2_PIX_FMT_YUV422P v4l2_fourcc('4','2','2','P') /* 16  YVU422 planar */
-#define V4L2_PIX_FMT_YUV411P v4l2_fourcc('4','1','1','P') /* 16  YVU411 planar */
-#define V4L2_PIX_FMT_Y41P    v4l2_fourcc('Y','4','1','P') /* 12  YUV 4:1:1     */
-#define V4L2_PIX_FMT_YUV444  v4l2_fourcc('Y','4','4','4') /* 16  xxxxyyyy uuuuvvvv */
-#define V4L2_PIX_FMT_YUV555  v4l2_fourcc('Y','U','V','O') /* 16  YUV-5-5-5     */
-#define V4L2_PIX_FMT_YUV565  v4l2_fourcc('Y','U','V','P') /* 16  YUV-5-6-5     */
-#define V4L2_PIX_FMT_YUV32   v4l2_fourcc('Y','U','V','4') /* 32  YUV-8-8-8-8   */
+#define V4L2_PIX_FMT_RGB332  v4l2_fourcc('R', 'G', 'B', '1') /*  8  RGB-3-3-2     */
+#define V4L2_PIX_FMT_RGB444  v4l2_fourcc('R', '4', '4', '4') /* 16  xxxxrrrr ggggbbbb */
+#define V4L2_PIX_FMT_RGB555  v4l2_fourcc('R', 'G', 'B', 'O') /* 16  RGB-5-5-5     */
+#define V4L2_PIX_FMT_RGB565  v4l2_fourcc('R', 'G', 'B', 'P') /* 16  RGB-5-6-5     */
+#define V4L2_PIX_FMT_RGB555X v4l2_fourcc('R', 'G', 'B', 'Q') /* 16  RGB-5-5-5 BE  */
+#define V4L2_PIX_FMT_RGB565X v4l2_fourcc('R', 'G', 'B', 'R') /* 16  RGB-5-6-5 BE  */
+#define V4L2_PIX_FMT_BGR24   v4l2_fourcc('B', 'G', 'R', '3') /* 24  BGR-8-8-8     */
+#define V4L2_PIX_FMT_RGB24   v4l2_fourcc('R', 'G', 'B', '3') /* 24  RGB-8-8-8     */
+#define V4L2_PIX_FMT_BGR32   v4l2_fourcc('B', 'G', 'R', '4') /* 32  BGR-8-8-8-8   */
+#define V4L2_PIX_FMT_RGB32   v4l2_fourcc('R', 'G', 'B', '4') /* 32  RGB-8-8-8-8   */
+#define V4L2_PIX_FMT_GREY    v4l2_fourcc('G', 'R', 'E', 'Y') /*  8  Greyscale     */
+#define V4L2_PIX_FMT_Y16     v4l2_fourcc('Y', '1', '6', ' ') /* 16  Greyscale     */
+#define V4L2_PIX_FMT_PAL8    v4l2_fourcc('P', 'A', 'L', '8') /*  8  8-bit palette */
+#define V4L2_PIX_FMT_YVU410  v4l2_fourcc('Y', 'V', 'U', '9') /*  9  YVU 4:1:0     */
+#define V4L2_PIX_FMT_YVU420  v4l2_fourcc('Y', 'V', '1', '2') /* 12  YVU 4:2:0     */
+#define V4L2_PIX_FMT_YUYV    v4l2_fourcc('Y', 'U', 'Y', 'V') /* 16  YUV 4:2:2     */
+#define V4L2_PIX_FMT_UYVY    v4l2_fourcc('U', 'Y', 'V', 'Y') /* 16  YUV 4:2:2     */
+#define V4L2_PIX_FMT_YUV422P v4l2_fourcc('4', '2', '2', 'P') /* 16  YVU422 planar */
+#define V4L2_PIX_FMT_YUV411P v4l2_fourcc('4', '1', '1', 'P') /* 16  YVU411 planar */
+#define V4L2_PIX_FMT_Y41P    v4l2_fourcc('Y', '4', '1', 'P') /* 12  YUV 4:1:1     */
+#define V4L2_PIX_FMT_YUV444  v4l2_fourcc('Y', '4', '4', '4') /* 16  xxxxyyyy uuuuvvvv */
+#define V4L2_PIX_FMT_YUV555  v4l2_fourcc('Y', 'U', 'V', 'O') /* 16  YUV-5-5-5     */
+#define V4L2_PIX_FMT_YUV565  v4l2_fourcc('Y', 'U', 'V', 'P') /* 16  YUV-5-6-5     */
+#define V4L2_PIX_FMT_YUV32   v4l2_fourcc('Y', 'U', 'V', '4') /* 32  YUV-8-8-8-8   */
 
 /* two planes -- one Y, one Cr + Cb interleaved  */
-#define V4L2_PIX_FMT_NV12    v4l2_fourcc('N','V','1','2') /* 12  Y/CbCr 4:2:0  */
-#define V4L2_PIX_FMT_NV21    v4l2_fourcc('N','V','2','1') /* 12  Y/CrCb 4:2:0  */
+#define V4L2_PIX_FMT_NV12    v4l2_fourcc('N', 'V', '1', '2') /* 12  Y/CbCr 4:2:0  */
+#define V4L2_PIX_FMT_NV21    v4l2_fourcc('N', 'V', '2', '1') /* 12  Y/CrCb 4:2:0  */
 
 /*  The following formats are not defined in the V4L2 specification */
-#define V4L2_PIX_FMT_YUV410  v4l2_fourcc('Y','U','V','9') /*  9  YUV 4:1:0     */
-#define V4L2_PIX_FMT_YUV420  v4l2_fourcc('Y','U','1','2') /* 12  YUV 4:2:0     */
-#define V4L2_PIX_FMT_YYUV    v4l2_fourcc('Y','Y','U','V') /* 16  YUV 4:2:2     */
-#define V4L2_PIX_FMT_HI240   v4l2_fourcc('H','I','2','4') /*  8  8-bit color   */
-#define V4L2_PIX_FMT_HM12    v4l2_fourcc('H','M','1','2') /*  8  YUV 4:2:0 16x16 macroblocks */
+#define V4L2_PIX_FMT_YUV410  v4l2_fourcc('Y', 'U', 'V', '9') /*  9  YUV 4:1:0     */
+#define V4L2_PIX_FMT_YUV420  v4l2_fourcc('Y', 'U', '1', '2') /* 12  YUV 4:2:0     */
+#define V4L2_PIX_FMT_YYUV    v4l2_fourcc('Y', 'Y', 'U', 'V') /* 16  YUV 4:2:2     */
+#define V4L2_PIX_FMT_HI240   v4l2_fourcc('H', 'I', '2', '4') /*  8  8-bit color   */
+#define V4L2_PIX_FMT_HM12    v4l2_fourcc('H', 'M', '1', '2') /*  8  YUV 4:2:0 16x16 macroblocks */
 
 /* see http://www.siliconimaging.com/RGB%20Bayer.htm */
-#define V4L2_PIX_FMT_SBGGR8  v4l2_fourcc('B','A','8','1') /*  8  BGBG.. GRGR.. */
-#define V4L2_PIX_FMT_SGBRG8  v4l2_fourcc('G','B','R','G') /*  8  GBGB.. RGRG.. */
-#define V4L2_PIX_FMT_SBGGR16 v4l2_fourcc('B','Y','R','2') /* 16  BGBG.. GRGR.. */
+#define V4L2_PIX_FMT_SBGGR8  v4l2_fourcc('B', 'A', '8', '1') /*  8  BGBG.. GRGR.. */
+#define V4L2_PIX_FMT_SGBRG8  v4l2_fourcc('G', 'B', 'R', 'G') /*  8  GBGB.. RGRG.. */
+#define V4L2_PIX_FMT_SBGGR16 v4l2_fourcc('B', 'Y', 'R', '2') /* 16  BGBG.. GRGR.. */
 
 /* compressed formats */
-#define V4L2_PIX_FMT_MJPEG    v4l2_fourcc('M','J','P','G') /* Motion-JPEG   */
-#define V4L2_PIX_FMT_JPEG     v4l2_fourcc('J','P','E','G') /* JFIF JPEG     */
-#define V4L2_PIX_FMT_DV       v4l2_fourcc('d','v','s','d') /* 1394          */
-#define V4L2_PIX_FMT_MPEG     v4l2_fourcc('M','P','E','G') /* MPEG-1/2/4    */
+#define V4L2_PIX_FMT_MJPEG    v4l2_fourcc('M', 'J', 'P', 'G') /* Motion-JPEG   */
+#define V4L2_PIX_FMT_JPEG     v4l2_fourcc('J', 'P', 'E', 'G') /* JFIF JPEG     */
+#define V4L2_PIX_FMT_DV       v4l2_fourcc('d', 'v', 's', 'd') /* 1394          */
+#define V4L2_PIX_FMT_MPEG     v4l2_fourcc('M', 'P', 'E', 'G') /* MPEG-1/2/4    */
 
 /*  Vendor-specific formats   */
-#define V4L2_PIX_FMT_WNVA     v4l2_fourcc('W','N','V','A') /* Winnov hw compress */
-#define V4L2_PIX_FMT_SN9C10X  v4l2_fourcc('S','9','1','0') /* SN9C10x compression */
-#define V4L2_PIX_FMT_PWC1     v4l2_fourcc('P','W','C','1') /* pwc older webcam */
-#define V4L2_PIX_FMT_PWC2     v4l2_fourcc('P','W','C','2') /* pwc newer webcam */
-#define V4L2_PIX_FMT_ET61X251 v4l2_fourcc('E','6','2','5') /* ET61X251 compression */
-#define V4L2_PIX_FMT_SPCA501  v4l2_fourcc('S','5','0','1') /* YUYV per line */
-#define V4L2_PIX_FMT_SPCA561  v4l2_fourcc('S','5','6','1') /* compressed GBRG bayer */
-#define V4L2_PIX_FMT_PAC207   v4l2_fourcc('P','2','0','7') /* compressed BGGR bayer */
+#define V4L2_PIX_FMT_WNVA     v4l2_fourcc('W', 'N', 'V', 'A') /* Winnov hw compress */
+#define V4L2_PIX_FMT_SN9C10X  v4l2_fourcc('S', '9', '1', '0') /* SN9C10x compression */
+#define V4L2_PIX_FMT_PWC1     v4l2_fourcc('P', 'W', 'C', '1') /* pwc older webcam */
+#define V4L2_PIX_FMT_PWC2     v4l2_fourcc('P', 'W', 'C', '2') /* pwc newer webcam */
+#define V4L2_PIX_FMT_ET61X251 v4l2_fourcc('E', '6', '2', '5') /* ET61X251 compression */
+#define V4L2_PIX_FMT_SPCA501  v4l2_fourcc('S', '5', '0', '1') /* YUYV per line */
+#define V4L2_PIX_FMT_SPCA505  v4l2_fourcc('S', '5', '0', '5') /* YYUV per line */
+#define V4L2_PIX_FMT_SPCA508  v4l2_fourcc('S', '5', '0', '8') /* YUVY per line */
+#define V4L2_PIX_FMT_SPCA561  v4l2_fourcc('S', '5', '6', '1') /* compressed GBRG bayer */
+#define V4L2_PIX_FMT_PAC207   v4l2_fourcc('P', '2', '0', '7') /* compressed BGGR bayer */
 
 /*
  *	F O R M A T   E N U M E R A T I O N
  */
-struct v4l2_fmtdesc
-{
+struct v4l2_fmtdesc {
 	__u32		    index;             /* Format number      */
 	enum v4l2_buf_type  type;              /* buffer type        */
 	__u32               flags;
@@ -349,21 +354,18 @@ struct v4l2_fmtdesc
 /*
  *	F R A M E   S I Z E   E N U M E R A T I O N
  */
-enum v4l2_frmsizetypes
-{
+enum v4l2_frmsizetypes {
 	V4L2_FRMSIZE_TYPE_DISCRETE	= 1,
 	V4L2_FRMSIZE_TYPE_CONTINUOUS	= 2,
 	V4L2_FRMSIZE_TYPE_STEPWISE	= 3,
 };
 
-struct v4l2_frmsize_discrete
-{
+struct v4l2_frmsize_discrete {
 	__u32			width;		/* Frame width [pixel] */
 	__u32			height;		/* Frame height [pixel] */
 };
 
-struct v4l2_frmsize_stepwise
-{
+struct v4l2_frmsize_stepwise {
 	__u32			min_width;	/* Minimum frame width [pixel] */
 	__u32			max_width;	/* Maximum frame width [pixel] */
 	__u32			step_width;	/* Frame width step size [pixel] */
@@ -372,8 +374,7 @@ struct v4l2_frmsize_stepwise
 	__u32			step_height;	/* Frame height step size [pixel] */
 };
 
-struct v4l2_frmsizeenum
-{
+struct v4l2_frmsizeenum {
 	__u32			index;		/* Frame size number */
 	__u32			pixel_format;	/* Pixel format */
 	__u32			type;		/* Frame size type the device supports. */
@@ -389,22 +390,19 @@ struct v4l2_frmsizeenum
 /*
  *	F R A M E   R A T E   E N U M E R A T I O N
  */
-enum v4l2_frmivaltypes
-{
+enum v4l2_frmivaltypes {
 	V4L2_FRMIVAL_TYPE_DISCRETE	= 1,
 	V4L2_FRMIVAL_TYPE_CONTINUOUS	= 2,
 	V4L2_FRMIVAL_TYPE_STEPWISE	= 3,
 };
 
-struct v4l2_frmival_stepwise
-{
+struct v4l2_frmival_stepwise {
 	struct v4l2_fract	min;		/* Minimum frame interval [s] */
 	struct v4l2_fract	max;		/* Maximum frame interval [s] */
 	struct v4l2_fract	step;		/* Frame interval step size [s] */
 };
 
-struct v4l2_frmivalenum
-{
+struct v4l2_frmivalenum {
 	__u32			index;		/* Frame format index */
 	__u32			pixel_format;	/* Pixel format */
 	__u32			width;		/* Frame width */
@@ -423,8 +421,7 @@ struct v4l2_frmivalenum
 /*
  *	T I M E C O D E
  */
-struct v4l2_timecode
-{
+struct v4l2_timecode {
 	__u32	type;
 	__u32	flags;
 	__u8	frames;
@@ -449,8 +446,7 @@ struct v4l2_timecode
 #define V4L2_TC_USERBITS_8BITCHARS	0x0008
 /* The above is based on SMPTE timecodes */
 
-struct v4l2_jpegcompression
-{
+struct v4l2_jpegcompression {
 	int quality;
 
 	int  APPn;              /* Number of APP segment to be written,
@@ -482,16 +478,14 @@ struct v4l2_jpegcompression
 /*
  *	M E M O R Y - M A P P I N G   B U F F E R S
  */
-struct v4l2_requestbuffers
-{
+struct v4l2_requestbuffers {
 	__u32			count;
 	enum v4l2_buf_type      type;
 	enum v4l2_memory        memory;
 	__u32			reserved[2];
 };
 
-struct v4l2_buffer
-{
+struct v4l2_buffer {
 	__u32			index;
 	enum v4l2_buf_type      type;
 	__u32			bytesused;
@@ -525,13 +519,12 @@ struct v4l2_buffer
 /*
  *	O V E R L A Y   P R E V I E W
  */
-struct v4l2_framebuffer
-{
+struct v4l2_framebuffer {
 	__u32			capability;
 	__u32			flags;
 /* FIXME: in theory we should pass something like PCI device + memory
  * region + offset instead of some physical address */
-	void*                   base;
+	void                    *base;
 	struct v4l2_pix_format	fmt;
 };
 /*  Flags for the 'capability' field. Read only */
@@ -550,14 +543,12 @@ struct v4l2_framebuffer
 #define V4L2_FBUF_FLAG_GLOBAL_ALPHA	0x0010
 #define V4L2_FBUF_FLAG_LOCAL_INV_ALPHA	0x0020
 
-struct v4l2_clip
-{
+struct v4l2_clip {
 	struct v4l2_rect        c;
 	struct v4l2_clip	__user *next;
 };
 
-struct v4l2_window
-{
+struct v4l2_window {
 	struct v4l2_rect        w;
 	enum v4l2_field  	field;
 	__u32			chromakey;
@@ -570,8 +561,7 @@ struct v4l2_window
 /*
  *	C A P T U R E   P A R A M E T E R S
  */
-struct v4l2_captureparm
-{
+struct v4l2_captureparm {
 	__u32		   capability;	  /*  Supported modes */
 	__u32		   capturemode;	  /*  Current mode */
 	struct v4l2_fract  timeperframe;  /*  Time per frame in .1us units */
@@ -584,8 +574,7 @@ struct v4l2_captureparm
 #define V4L2_MODE_HIGHQUALITY	0x0001	/*  High quality imaging mode */
 #define V4L2_CAP_TIMEPERFRAME	0x1000	/*  timeperframe field is supported */
 
-struct v4l2_outputparm
-{
+struct v4l2_outputparm {
 	__u32		   capability;	 /*  Supported modes */
 	__u32		   outputmode;	 /*  Current mode */
 	struct v4l2_fract  timeperframe; /*  Time per frame in seconds */
@@ -702,8 +691,7 @@ typedef __u64 v4l2_std_id;
 #define V4L2_STD_ALL            (V4L2_STD_525_60	|\
 				 V4L2_STD_625_50)
 
-struct v4l2_standard
-{
+struct v4l2_standard {
 	__u32		     index;
 	v4l2_std_id          id;
 	__u8		     name[24];
@@ -715,8 +703,7 @@ struct v4l2_standard
 /*
  *	V I D E O   I N P U T S
  */
-struct v4l2_input
-{
+struct v4l2_input {
 	__u32	     index;		/*  Which input */
 	__u8	     name[32];		/*  Label */
 	__u32	     type;		/*  Type of input */
@@ -753,8 +740,7 @@ struct v4l2_input
 /*
  *	V I D E O   O U T P U T S
  */
-struct v4l2_output
-{
+struct v4l2_output {
 	__u32	     index;		/*  Which output */
 	__u8	     name[32];		/*  Label */
 	__u32	     type;		/*  Type of output */
@@ -771,14 +757,12 @@ struct v4l2_output
 /*
  *	C O N T R O L S
  */
-struct v4l2_control
-{
+struct v4l2_control {
 	__u32		     id;
 	__s32		     value;
 };
 
-struct v4l2_ext_control
-{
+struct v4l2_ext_control {
 	__u32 id;
 	__u32 reserved2[2];
 	union {
@@ -788,8 +772,7 @@ struct v4l2_ext_control
 	};
 } __attribute__ ((packed));
 
-struct v4l2_ext_controls
-{
+struct v4l2_ext_controls {
 	__u32 ctrl_class;
 	__u32 count;
 	__u32 error_idx;
@@ -807,8 +790,7 @@ struct v4l2_ext_controls
 #define V4L2_CTRL_DRIVER_PRIV(id) (((id) & 0xffff) >= 0x1000)
 
 /*  Used in the VIDIOC_QUERYCTRL ioctl for querying controls */
-struct v4l2_queryctrl
-{
+struct v4l2_queryctrl {
 	__u32		     id;
 	enum v4l2_ctrl_type  type;
 	__u8		     name[32];	/* Whatever */
@@ -821,8 +803,7 @@ struct v4l2_queryctrl
 };
 
 /*  Used in the VIDIOC_QUERYMENU ioctl for querying menu items */
-struct v4l2_querymenu
-{
+struct v4l2_querymenu {
 	__u32		id;
 	__u32		index;
 	__u8		name[32];	/* Whatever */
@@ -1104,8 +1085,7 @@ enum  v4l2_exposure_auto_type {
 /*
  *	T U N I N G
  */
-struct v4l2_tuner
-{
+struct v4l2_tuner {
 	__u32                   index;
 	__u8			name[32];
 	enum v4l2_tuner_type    type;
@@ -1119,8 +1099,7 @@ struct v4l2_tuner
 	__u32			reserved[4];
 };
 
-struct v4l2_modulator
-{
+struct v4l2_modulator {
 	__u32			index;
 	__u8			name[32];
 	__u32			capability;
@@ -1153,8 +1132,7 @@ struct v4l2_modulator
 #define V4L2_TUNER_MODE_LANG1		0x0003
 #define V4L2_TUNER_MODE_LANG1_LANG2	0x0004
 
-struct v4l2_frequency
-{
+struct v4l2_frequency {
 	__u32		      tuner;
 	enum v4l2_tuner_type  type;
 	__u32		      frequency;
@@ -1172,8 +1150,7 @@ struct v4l2_hw_freq_seek {
 /*
  *	A U D I O
  */
-struct v4l2_audio
-{
+struct v4l2_audio {
 	__u32	index;
 	__u8	name[32];
 	__u32	capability;
@@ -1188,8 +1165,7 @@ struct v4l2_audio
 /*  Flags for the 'mode' field */
 #define V4L2_AUDMODE_AVL		0x00001
 
-struct v4l2_audioout
-{
+struct v4l2_audioout {
 	__u32	index;
 	__u8	name[32];
 	__u32	capability;
@@ -1253,8 +1229,7 @@ struct v4l2_encoder_cmd {
  */
 
 /* Raw VBI */
-struct v4l2_vbi_format
-{
+struct v4l2_vbi_format {
 	__u32	sampling_rate;		/* in 1 Hz */
 	__u32	offset;
 	__u32	samples_per_line;
@@ -1266,8 +1241,8 @@ struct v4l2_vbi_format
 };
 
 /*  VBI flags  */
-#define V4L2_VBI_UNSYNC		(1<< 0)
-#define V4L2_VBI_INTERLACED	(1<< 1)
+#define V4L2_VBI_UNSYNC		(1 << 0)
+#define V4L2_VBI_INTERLACED	(1 << 1)
 
 /* Sliced VBI
  *
@@ -1276,8 +1251,7 @@ struct v4l2_vbi_format
  * notice in the definitive implementation.
  */
 
-struct v4l2_sliced_vbi_format
-{
+struct v4l2_sliced_vbi_format {
 	__u16   service_set;
 	/* service_lines[0][...] specifies lines 0-23 (1-23 used) of the first field
 	   service_lines[1][...] specifies lines 0-23 (1-23 used) of the second field
@@ -1301,8 +1275,7 @@ struct v4l2_sliced_vbi_format
 #define V4L2_SLICED_VBI_525             (V4L2_SLICED_CAPTION_525)
 #define V4L2_SLICED_VBI_625             (V4L2_SLICED_TELETEXT_B | V4L2_SLICED_VPS | V4L2_SLICED_WSS_625)
 
-struct v4l2_sliced_vbi_cap
-{
+struct v4l2_sliced_vbi_cap {
 	__u16   service_set;
 	/* service_lines[0][...] specifies lines 0-23 (1-23 used) of the first field
 	   service_lines[1][...] specifies lines 0-23 (1-23 used) of the second field
@@ -1313,8 +1286,7 @@ struct v4l2_sliced_vbi_cap
 	__u32   reserved[3];    /* must be 0 */
 };
 
-struct v4l2_sliced_vbi_data
-{
+struct v4l2_sliced_vbi_data {
 	__u32   id;
 	__u32   field;          /* 0: first field, 1: second field */
 	__u32   line;           /* 1-23 */
@@ -1328,27 +1300,23 @@ struct v4l2_sliced_vbi_data
 
 /*	Stream data format
  */
-struct v4l2_format
-{
+struct v4l2_format {
 	enum v4l2_buf_type type;
-	union
-	{
-		struct v4l2_pix_format		pix;     // V4L2_BUF_TYPE_VIDEO_CAPTURE
-		struct v4l2_window		win;     // V4L2_BUF_TYPE_VIDEO_OVERLAY
-		struct v4l2_vbi_format		vbi;     // V4L2_BUF_TYPE_VBI_CAPTURE
-		struct v4l2_sliced_vbi_format	sliced;  // V4L2_BUF_TYPE_SLICED_VBI_CAPTURE
-		__u8	raw_data[200];                   // user-defined
+	union {
+		struct v4l2_pix_format		pix;     /* V4L2_BUF_TYPE_VIDEO_CAPTURE */
+		struct v4l2_window		win;     /* V4L2_BUF_TYPE_VIDEO_OVERLAY */
+		struct v4l2_vbi_format		vbi;     /* V4L2_BUF_TYPE_VBI_CAPTURE */
+		struct v4l2_sliced_vbi_format	sliced;  /* V4L2_BUF_TYPE_SLICED_VBI_CAPTURE */
+		__u8	raw_data[200];                   /* user-defined */
 	} fmt;
 };
 
 
 /*	Stream type-dependent parameters
  */
-struct v4l2_streamparm
-{
+struct v4l2_streamparm {
 	enum v4l2_buf_type type;
-	union
-	{
+	union {
 		struct v4l2_captureparm	capture;
 		struct v4l2_outputparm	output;
 		__u8	raw_data[200];  /* user-defined */
@@ -1386,92 +1354,86 @@ struct v4l2_chip_ident {
  *	I O C T L   C O D E S   F O R   V I D E O   D E V I C E S
  *
  */
-#define VIDIOC_QUERYCAP		_IOR  ('V',  0, struct v4l2_capability)
-#define VIDIOC_RESERVED		_IO   ('V',  1)
-#define VIDIOC_ENUM_FMT         _IOWR ('V',  2, struct v4l2_fmtdesc)
-#define VIDIOC_G_FMT		_IOWR ('V',  4, struct v4l2_format)
-#define VIDIOC_S_FMT		_IOWR ('V',  5, struct v4l2_format)
-#define VIDIOC_REQBUFS		_IOWR ('V',  8, struct v4l2_requestbuffers)
-#define VIDIOC_QUERYBUF		_IOWR ('V',  9, struct v4l2_buffer)
-#define VIDIOC_G_FBUF		_IOR  ('V', 10, struct v4l2_framebuffer)
-#define VIDIOC_S_FBUF		_IOW  ('V', 11, struct v4l2_framebuffer)
-#define VIDIOC_OVERLAY		_IOW  ('V', 14, int)
-#define VIDIOC_QBUF		_IOWR ('V', 15, struct v4l2_buffer)
-#define VIDIOC_DQBUF		_IOWR ('V', 17, struct v4l2_buffer)
-#define VIDIOC_STREAMON		_IOW  ('V', 18, int)
-#define VIDIOC_STREAMOFF	_IOW  ('V', 19, int)
-#define VIDIOC_G_PARM		_IOWR ('V', 21, struct v4l2_streamparm)
-#define VIDIOC_S_PARM		_IOWR ('V', 22, struct v4l2_streamparm)
-#define VIDIOC_G_STD		_IOR  ('V', 23, v4l2_std_id)
-#define VIDIOC_S_STD		_IOW  ('V', 24, v4l2_std_id)
-#define VIDIOC_ENUMSTD		_IOWR ('V', 25, struct v4l2_standard)
-#define VIDIOC_ENUMINPUT	_IOWR ('V', 26, struct v4l2_input)
-#define VIDIOC_G_CTRL		_IOWR ('V', 27, struct v4l2_control)
-#define VIDIOC_S_CTRL		_IOWR ('V', 28, struct v4l2_control)
-#define VIDIOC_G_TUNER		_IOWR ('V', 29, struct v4l2_tuner)
-#define VIDIOC_S_TUNER		_IOW  ('V', 30, struct v4l2_tuner)
-#define VIDIOC_G_AUDIO		_IOR  ('V', 33, struct v4l2_audio)
-#define VIDIOC_S_AUDIO		_IOW  ('V', 34, struct v4l2_audio)
-#define VIDIOC_QUERYCTRL	_IOWR ('V', 36, struct v4l2_queryctrl)
-#define VIDIOC_QUERYMENU	_IOWR ('V', 37, struct v4l2_querymenu)
-#define VIDIOC_G_INPUT		_IOR  ('V', 38, int)
-#define VIDIOC_S_INPUT		_IOWR ('V', 39, int)
-#define VIDIOC_G_OUTPUT		_IOR  ('V', 46, int)
-#define VIDIOC_S_OUTPUT		_IOWR ('V', 47, int)
-#define VIDIOC_ENUMOUTPUT	_IOWR ('V', 48, struct v4l2_output)
-#define VIDIOC_G_AUDOUT		_IOR  ('V', 49, struct v4l2_audioout)
-#define VIDIOC_S_AUDOUT		_IOW  ('V', 50, struct v4l2_audioout)
-#define VIDIOC_G_MODULATOR	_IOWR ('V', 54, struct v4l2_modulator)
-#define VIDIOC_S_MODULATOR	_IOW  ('V', 55, struct v4l2_modulator)
-#define VIDIOC_G_FREQUENCY	_IOWR ('V', 56, struct v4l2_frequency)
-#define VIDIOC_S_FREQUENCY	_IOW  ('V', 57, struct v4l2_frequency)
-#define VIDIOC_CROPCAP		_IOWR ('V', 58, struct v4l2_cropcap)
-#define VIDIOC_G_CROP		_IOWR ('V', 59, struct v4l2_crop)
-#define VIDIOC_S_CROP		_IOW  ('V', 60, struct v4l2_crop)
-#define VIDIOC_G_JPEGCOMP	_IOR  ('V', 61, struct v4l2_jpegcompression)
-#define VIDIOC_S_JPEGCOMP	_IOW  ('V', 62, struct v4l2_jpegcompression)
-#define VIDIOC_QUERYSTD      	_IOR  ('V', 63, v4l2_std_id)
-#define VIDIOC_TRY_FMT      	_IOWR ('V', 64, struct v4l2_format)
-#define VIDIOC_ENUMAUDIO	_IOWR ('V', 65, struct v4l2_audio)
-#define VIDIOC_ENUMAUDOUT	_IOWR ('V', 66, struct v4l2_audioout)
-#define VIDIOC_G_PRIORITY       _IOR  ('V', 67, enum v4l2_priority)
-#define VIDIOC_S_PRIORITY       _IOW  ('V', 68, enum v4l2_priority)
-#define VIDIOC_G_SLICED_VBI_CAP _IOWR ('V', 69, struct v4l2_sliced_vbi_cap)
-#define VIDIOC_LOG_STATUS       _IO   ('V', 70)
-#define VIDIOC_G_EXT_CTRLS	_IOWR ('V', 71, struct v4l2_ext_controls)
-#define VIDIOC_S_EXT_CTRLS	_IOWR ('V', 72, struct v4l2_ext_controls)
-#define VIDIOC_TRY_EXT_CTRLS	_IOWR ('V', 73, struct v4l2_ext_controls)
+#define VIDIOC_QUERYCAP		 _IOR('V',  0, struct v4l2_capability)
+#define VIDIOC_RESERVED		  _IO('V',  1)
+#define VIDIOC_ENUM_FMT         _IOWR('V',  2, struct v4l2_fmtdesc)
+#define VIDIOC_G_FMT		_IOWR('V',  4, struct v4l2_format)
+#define VIDIOC_S_FMT		_IOWR('V',  5, struct v4l2_format)
+#define VIDIOC_REQBUFS		_IOWR('V',  8, struct v4l2_requestbuffers)
+#define VIDIOC_QUERYBUF		_IOWR('V',  9, struct v4l2_buffer)
+#define VIDIOC_G_FBUF		 _IOR('V', 10, struct v4l2_framebuffer)
+#define VIDIOC_S_FBUF		 _IOW('V', 11, struct v4l2_framebuffer)
+#define VIDIOC_OVERLAY		 _IOW('V', 14, int)
+#define VIDIOC_QBUF		_IOWR('V', 15, struct v4l2_buffer)
+#define VIDIOC_DQBUF		_IOWR('V', 17, struct v4l2_buffer)
+#define VIDIOC_STREAMON		 _IOW('V', 18, int)
+#define VIDIOC_STREAMOFF	 _IOW('V', 19, int)
+#define VIDIOC_G_PARM		_IOWR('V', 21, struct v4l2_streamparm)
+#define VIDIOC_S_PARM		_IOWR('V', 22, struct v4l2_streamparm)
+#define VIDIOC_G_STD		 _IOR('V', 23, v4l2_std_id)
+#define VIDIOC_S_STD		 _IOW('V', 24, v4l2_std_id)
+#define VIDIOC_ENUMSTD		_IOWR('V', 25, struct v4l2_standard)
+#define VIDIOC_ENUMINPUT	_IOWR('V', 26, struct v4l2_input)
+#define VIDIOC_G_CTRL		_IOWR('V', 27, struct v4l2_control)
+#define VIDIOC_S_CTRL		_IOWR('V', 28, struct v4l2_control)
+#define VIDIOC_G_TUNER		_IOWR('V', 29, struct v4l2_tuner)
+#define VIDIOC_S_TUNER		 _IOW('V', 30, struct v4l2_tuner)
+#define VIDIOC_G_AUDIO		 _IOR('V', 33, struct v4l2_audio)
+#define VIDIOC_S_AUDIO		 _IOW('V', 34, struct v4l2_audio)
+#define VIDIOC_QUERYCTRL	_IOWR('V', 36, struct v4l2_queryctrl)
+#define VIDIOC_QUERYMENU	_IOWR('V', 37, struct v4l2_querymenu)
+#define VIDIOC_G_INPUT		 _IOR('V', 38, int)
+#define VIDIOC_S_INPUT		_IOWR('V', 39, int)
+#define VIDIOC_G_OUTPUT		 _IOR('V', 46, int)
+#define VIDIOC_S_OUTPUT		_IOWR('V', 47, int)
+#define VIDIOC_ENUMOUTPUT	_IOWR('V', 48, struct v4l2_output)
+#define VIDIOC_G_AUDOUT		 _IOR('V', 49, struct v4l2_audioout)
+#define VIDIOC_S_AUDOUT		 _IOW('V', 50, struct v4l2_audioout)
+#define VIDIOC_G_MODULATOR	_IOWR('V', 54, struct v4l2_modulator)
+#define VIDIOC_S_MODULATOR	 _IOW('V', 55, struct v4l2_modulator)
+#define VIDIOC_G_FREQUENCY	_IOWR('V', 56, struct v4l2_frequency)
+#define VIDIOC_S_FREQUENCY	 _IOW('V', 57, struct v4l2_frequency)
+#define VIDIOC_CROPCAP		_IOWR('V', 58, struct v4l2_cropcap)
+#define VIDIOC_G_CROP		_IOWR('V', 59, struct v4l2_crop)
+#define VIDIOC_S_CROP		 _IOW('V', 60, struct v4l2_crop)
+#define VIDIOC_G_JPEGCOMP	 _IOR('V', 61, struct v4l2_jpegcompression)
+#define VIDIOC_S_JPEGCOMP	 _IOW('V', 62, struct v4l2_jpegcompression)
+#define VIDIOC_QUERYSTD      	 _IOR('V', 63, v4l2_std_id)
+#define VIDIOC_TRY_FMT      	_IOWR('V', 64, struct v4l2_format)
+#define VIDIOC_ENUMAUDIO	_IOWR('V', 65, struct v4l2_audio)
+#define VIDIOC_ENUMAUDOUT	_IOWR('V', 66, struct v4l2_audioout)
+#define VIDIOC_G_PRIORITY        _IOR('V', 67, enum v4l2_priority)
+#define VIDIOC_S_PRIORITY        _IOW('V', 68, enum v4l2_priority)
+#define VIDIOC_G_SLICED_VBI_CAP _IOWR('V', 69, struct v4l2_sliced_vbi_cap)
+#define VIDIOC_LOG_STATUS         _IO('V', 70)
+#define VIDIOC_G_EXT_CTRLS	_IOWR('V', 71, struct v4l2_ext_controls)
+#define VIDIOC_S_EXT_CTRLS	_IOWR('V', 72, struct v4l2_ext_controls)
+#define VIDIOC_TRY_EXT_CTRLS	_IOWR('V', 73, struct v4l2_ext_controls)
 #if 1
-#define VIDIOC_ENUM_FRAMESIZES	_IOWR ('V', 74, struct v4l2_frmsizeenum)
-#define VIDIOC_ENUM_FRAMEINTERVALS	_IOWR ('V', 75, struct v4l2_frmivalenum)
-#define VIDIOC_G_ENC_INDEX      _IOR  ('V', 76, struct v4l2_enc_idx)
-#define VIDIOC_ENCODER_CMD      _IOWR ('V', 77, struct v4l2_encoder_cmd)
-#define VIDIOC_TRY_ENCODER_CMD  _IOWR ('V', 78, struct v4l2_encoder_cmd)
+#define VIDIOC_ENUM_FRAMESIZES	_IOWR('V', 74, struct v4l2_frmsizeenum)
+#define VIDIOC_ENUM_FRAMEINTERVALS _IOWR('V', 75, struct v4l2_frmivalenum)
+#define VIDIOC_G_ENC_INDEX       _IOR('V', 76, struct v4l2_enc_idx)
+#define VIDIOC_ENCODER_CMD      _IOWR('V', 77, struct v4l2_encoder_cmd)
+#define VIDIOC_TRY_ENCODER_CMD  _IOWR('V', 78, struct v4l2_encoder_cmd)
 
 /* Experimental, only implemented if CONFIG_VIDEO_ADV_DEBUG is defined */
-#define	VIDIOC_DBG_S_REGISTER 	_IOW  ('V', 79, struct v4l2_register)
-#define	VIDIOC_DBG_G_REGISTER 	_IOWR ('V', 80, struct v4l2_register)
+#define	VIDIOC_DBG_S_REGISTER 	 _IOW('V', 79, struct v4l2_register)
+#define	VIDIOC_DBG_G_REGISTER 	_IOWR('V', 80, struct v4l2_register)
 
-#define VIDIOC_G_CHIP_IDENT     _IOWR ('V', 81, struct v4l2_chip_ident)
+#define VIDIOC_G_CHIP_IDENT     _IOWR('V', 81, struct v4l2_chip_ident)
 #endif
-#define VIDIOC_S_HW_FREQ_SEEK	_IOW  ('V', 82, struct v4l2_hw_freq_seek)
+#define VIDIOC_S_HW_FREQ_SEEK	 _IOW('V', 82, struct v4l2_hw_freq_seek)
 
 #ifdef __OLD_VIDIOC_
 /* for compatibility, will go away some day */
-#define VIDIOC_OVERLAY_OLD     	_IOWR ('V', 14, int)
-#define VIDIOC_S_PARM_OLD      	_IOW  ('V', 22, struct v4l2_streamparm)
-#define VIDIOC_S_CTRL_OLD      	_IOW  ('V', 28, struct v4l2_control)
-#define VIDIOC_G_AUDIO_OLD     	_IOWR ('V', 33, struct v4l2_audio)
-#define VIDIOC_G_AUDOUT_OLD    	_IOWR ('V', 49, struct v4l2_audioout)
-#define VIDIOC_CROPCAP_OLD     	_IOR  ('V', 58, struct v4l2_cropcap)
+#define VIDIOC_OVERLAY_OLD     	_IOWR('V', 14, int)
+#define VIDIOC_S_PARM_OLD      	 _IOW('V', 22, struct v4l2_streamparm)
+#define VIDIOC_S_CTRL_OLD      	 _IOW('V', 28, struct v4l2_control)
+#define VIDIOC_G_AUDIO_OLD     	_IOWR('V', 33, struct v4l2_audio)
+#define VIDIOC_G_AUDOUT_OLD    	_IOWR('V', 49, struct v4l2_audioout)
+#define VIDIOC_CROPCAP_OLD     	 _IOR('V', 58, struct v4l2_cropcap)
 #endif
 
 #define BASE_VIDIOC_PRIVATE	192		/* 192-255 are private */
 
 #endif /* __LINUX_VIDEODEV2_H */
-
-/*
- * Local variables:
- * c-basic-offset: 8
- * End:
- */
diff --git a/include/linux/videotext.h b/include/linux/videotext.h
index 018f92047ff8..3e68c8d1c7f7 100644
--- a/include/linux/videotext.h
+++ b/include/linux/videotext.h
@@ -45,10 +45,10 @@
 #define VTXIOCCLRCACHE_OLD 0x710b  /* clear cache on VTX-interface (if avail.) */
 #define VTXIOCSETVIRT_OLD  0x710c  /* turn on virtual mode (this disables TV-display) */
 
-/* 
+/*
  *	Definitions for VTXIOCGETINFO
  */
- 
+
 #define SAA5243 0
 #define SAA5246 1
 #define SAA5249 2
@@ -57,10 +57,10 @@
 
 typedef struct {
 	int version_major, version_minor;	/* version of driver; if version_major changes, driver */
-						/* is not backward compatible!!! CHECK THIS!!! */  
+						/* is not backward compatible!!! CHECK THIS!!! */
 	int numpages;				/* number of page-buffers of vtx-chipset */
 	int cct_type;				/* type of vtx-chipset (SAA5243, SAA5246, SAA5248 or
-  						 * SAA5249) */
+						 * SAA5249) */
 }
 vtx_info_t;
 
@@ -81,7 +81,7 @@ vtx_info_t;
 #define PGMASK_HOUR (HR_TEN | HR_UNIT)
 #define PGMASK_MINUTE (MIN_TEN | MIN_UNIT)
 
-typedef struct 
+typedef struct
 {
 	int page;	/* number of requested page (hexadecimal) */
 	int hour;	/* requested hour (hexadecimal) */
@@ -98,11 +98,11 @@ vtx_pagereq_t;
 /*
  *	Definitions for VTXIOC{GETSTAT,PUTSTAT}
  */
- 
+
 #define VTX_PAGESIZE (40 * 24)
 #define VTX_VIRTUALSIZE (40 * 49)
 
-typedef struct 
+typedef struct
 {
 	int pagenum;			/* number of page (hexadecimal) */
 	int hour;			/* hour (hexadecimal) */
@@ -121,5 +121,5 @@ typedef struct
 	unsigned hamming : 1;		/* hamming-error occurred */
 }
 vtx_pageinfo_t;
- 
+
 #endif /* _VTX_H */
diff --git a/include/linux/virtio_9p.h b/include/linux/virtio_9p.h
index 8eff0b53910b..b3c4a60ceeb3 100644
--- a/include/linux/virtio_9p.h
+++ b/include/linux/virtio_9p.h
@@ -1,5 +1,7 @@
 #ifndef _LINUX_VIRTIO_9P_H
 #define _LINUX_VIRTIO_9P_H
+/* This header is BSD licensed so anyone can use the definitions to implement
+ * compatible drivers/servers. */
 #include <linux/virtio_config.h>
 
 /* The ID for virtio console */
diff --git a/include/linux/virtio_balloon.h b/include/linux/virtio_balloon.h
index 979524ee75b7..c30c7bfbf39b 100644
--- a/include/linux/virtio_balloon.h
+++ b/include/linux/virtio_balloon.h
@@ -1,5 +1,7 @@
 #ifndef _LINUX_VIRTIO_BALLOON_H
 #define _LINUX_VIRTIO_BALLOON_H
+/* This header is BSD licensed so anyone can use the definitions to implement
+ * compatible drivers/servers. */
 #include <linux/virtio_config.h>
 
 /* The ID for virtio_balloon */
diff --git a/include/linux/virtio_blk.h b/include/linux/virtio_blk.h
index 5f79a5f9de79..c1aef85243bf 100644
--- a/include/linux/virtio_blk.h
+++ b/include/linux/virtio_blk.h
@@ -1,5 +1,7 @@
 #ifndef _LINUX_VIRTIO_BLK_H
 #define _LINUX_VIRTIO_BLK_H
+/* This header is BSD licensed so anyone can use the definitions to implement
+ * compatible drivers/servers. */
 #include <linux/virtio_config.h>
 
 /* The ID for virtio_block */
@@ -11,6 +13,7 @@
 #define VIRTIO_BLK_F_SEG_MAX	2	/* Indicates maximum # of segments */
 #define VIRTIO_BLK_F_GEOMETRY	4	/* Legacy geometry available  */
 #define VIRTIO_BLK_F_RO		5	/* Disk is read-only */
+#define VIRTIO_BLK_F_BLK_SIZE	6	/* Block size of disk is available*/
 
 struct virtio_blk_config
 {
@@ -26,6 +29,8 @@ struct virtio_blk_config
 		__u8 heads;
 		__u8 sectors;
 	} geometry;
+	/* block size of device (if VIRTIO_BLK_F_BLK_SIZE) */
+	__u32 blk_size;
 } __attribute__((packed));
 
 /* These two define direction. */
diff --git a/include/linux/virtio_config.h b/include/linux/virtio_config.h
index f364bbf63c34..bf8ec283b232 100644
--- a/include/linux/virtio_config.h
+++ b/include/linux/virtio_config.h
@@ -1,5 +1,8 @@
 #ifndef _LINUX_VIRTIO_CONFIG_H
 #define _LINUX_VIRTIO_CONFIG_H
+/* This header, excluding the #ifdef __KERNEL__ part, is BSD licensed so
+ * anyone can use the definitions to implement compatible drivers/servers. */
+
 /* Virtio devices use a standardized configuration space to define their
  * features and pass configuration information, but each implementation can
  * store and access that space differently. */
@@ -15,6 +18,12 @@
 /* We've given up on this device. */
 #define VIRTIO_CONFIG_S_FAILED		0x80
 
+/* Some virtio feature bits (currently bits 28 through 31) are reserved for the
+ * transport being used (eg. virtio_ring), the rest are per-device feature
+ * bits. */
+#define VIRTIO_TRANSPORT_F_START	28
+#define VIRTIO_TRANSPORT_F_END		32
+
 /* Do we get callbacks when the ring is completely used, even if we've
  * suppressed them? */
 #define VIRTIO_F_NOTIFY_ON_EMPTY	24
@@ -52,9 +61,10 @@
  * @get_features: get the array of feature bits for this device.
  *	vdev: the virtio_device
  *	Returns the first 32 feature bits (all we currently need).
- * @set_features: confirm what device features we'll be using.
+ * @finalize_features: confirm what device features we'll be using.
  *	vdev: the virtio_device
- *	feature: the first 32 feature bits
+ *	This gives the final feature bits for the device: it can change
+ *	the dev->feature bits if it wants.
  */
 struct virtio_config_ops
 {
@@ -70,7 +80,7 @@ struct virtio_config_ops
 				     void (*callback)(struct virtqueue *));
 	void (*del_vq)(struct virtqueue *vq);
 	u32 (*get_features)(struct virtio_device *vdev);
-	void (*set_features)(struct virtio_device *vdev, u32 features);
+	void (*finalize_features)(struct virtio_device *vdev);
 };
 
 /* If driver didn't advertise the feature, it will never appear. */
diff --git a/include/linux/virtio_console.h b/include/linux/virtio_console.h
index ed2d4ead7eb7..19a0da0dba41 100644
--- a/include/linux/virtio_console.h
+++ b/include/linux/virtio_console.h
@@ -1,6 +1,8 @@
 #ifndef _LINUX_VIRTIO_CONSOLE_H
 #define _LINUX_VIRTIO_CONSOLE_H
 #include <linux/virtio_config.h>
+/* This header, excluding the #ifdef __KERNEL__ part, is BSD licensed so
+ * anyone can use the definitions to implement compatible drivers/servers. */
 
 /* The ID for virtio console */
 #define VIRTIO_ID_CONSOLE	3
diff --git a/include/linux/virtio_net.h b/include/linux/virtio_net.h
index 38c0571820fb..5e33761b9b8a 100644
--- a/include/linux/virtio_net.h
+++ b/include/linux/virtio_net.h
@@ -1,5 +1,7 @@
 #ifndef _LINUX_VIRTIO_NET_H
 #define _LINUX_VIRTIO_NET_H
+/* This header is BSD licensed so anyone can use the definitions to implement
+ * compatible drivers/servers. */
 #include <linux/virtio_config.h>
 
 /* The ID for virtio_net */
diff --git a/include/linux/virtio_pci.h b/include/linux/virtio_pci.h
index b3151659cf49..cdef35742932 100644
--- a/include/linux/virtio_pci.h
+++ b/include/linux/virtio_pci.h
@@ -9,9 +9,8 @@
  * Authors:
  *  Anthony Liguori  <aliguori@us.ibm.com>
  *
- * This work is licensed under the terms of the GNU GPL, version 2 or later.
- * See the COPYING file in the top-level directory.
- *
+ * This header is BSD licensed so anyone can use the definitions to implement
+ * compatible drivers/servers.
  */
 
 #ifndef _LINUX_VIRTIO_PCI_H
diff --git a/include/linux/virtio_ring.h b/include/linux/virtio_ring.h
index abe481ed990e..c4a598fb3826 100644
--- a/include/linux/virtio_ring.h
+++ b/include/linux/virtio_ring.h
@@ -120,6 +120,8 @@ struct virtqueue *vring_new_virtqueue(unsigned int num,
 				      void (*notify)(struct virtqueue *vq),
 				      void (*callback)(struct virtqueue *vq));
 void vring_del_virtqueue(struct virtqueue *vq);
+/* Filter out transport-specific feature bits. */
+void vring_transport_features(struct virtio_device *vdev);
 
 irqreturn_t vring_interrupt(int irq, void *_vq);
 #endif /* __KERNEL__ */
diff --git a/include/linux/virtio_rng.h b/include/linux/virtio_rng.h
index 331afb6c9f62..1a85dab8a940 100644
--- a/include/linux/virtio_rng.h
+++ b/include/linux/virtio_rng.h
@@ -1,5 +1,7 @@
 #ifndef _LINUX_VIRTIO_RNG_H
 #define _LINUX_VIRTIO_RNG_H
+/* This header is BSD licensed so anyone can use the definitions to implement
+ * compatible drivers/servers. */
 #include <linux/virtio_config.h>
 
 /* The ID for virtio_rng */
diff --git a/include/linux/vmalloc.h b/include/linux/vmalloc.h
index 364789aae9f3..328eb4022727 100644
--- a/include/linux/vmalloc.h
+++ b/include/linux/vmalloc.h
@@ -4,9 +4,9 @@
 #include <linux/spinlock.h>
 #include <asm/page.h>		/* pgprot_t */
 
-struct vm_area_struct;
+struct vm_area_struct;		/* vma defining user mapping in mm_types.h */
 
-/* bits in vm_struct->flags */
+/* bits in flags of vmalloc's vm_struct below */
 #define VM_IOREMAP	0x00000001	/* ioremap() and friends */
 #define VM_ALLOC	0x00000002	/* vmalloc() */
 #define VM_MAP		0x00000004	/* vmap()ed pages */
diff --git a/include/linux/vt_kern.h b/include/linux/vt_kern.h
index 9448ffbdcbf6..1cbd0a7db4e6 100644
--- a/include/linux/vt_kern.h
+++ b/include/linux/vt_kern.h
@@ -12,6 +12,7 @@
 #include <linux/mutex.h>
 #include <linux/console_struct.h>
 #include <linux/mm.h>
+#include <linux/consolemap.h>
 
 /*
  * Presently, a lot of graphics programs do not restore the contents of
@@ -34,7 +35,6 @@ extern int fg_console, last_console, want_console;
 int vc_allocate(unsigned int console);
 int vc_cons_allocated(unsigned int console);
 int vc_resize(struct vc_data *vc, unsigned int cols, unsigned int lines);
-int vc_lock_resize(struct vc_data *vc, unsigned int cols, unsigned int lines);
 void vc_deallocate(unsigned int console);
 void reset_palette(struct vc_data *vc);
 void do_blank_screen(int entering_gfx);
@@ -54,6 +54,7 @@ void redraw_screen(struct vc_data *vc, int is_switch);
 struct tty_struct;
 int tioclinux(struct tty_struct *tty, unsigned long arg);
 
+#ifdef CONFIG_CONSOLE_TRANSLATIONS
 /* consolemap.c */
 
 struct unimapinit;
@@ -71,6 +72,24 @@ void con_free_unimap(struct vc_data *vc);
 void con_protect_unimap(struct vc_data *vc, int rdonly);
 int con_copy_unimap(struct vc_data *dst_vc, struct vc_data *src_vc);
 
+#define vc_translate(vc, c) ((vc)->vc_translate[(c) |			\
+					((vc)->vc_toggle_meta ? 0x80 : 0)])
+#else
+#define con_set_trans_old(arg) (0)
+#define con_get_trans_old(arg) (-EINVAL)
+#define con_set_trans_new(arg) (0)
+#define con_get_trans_new(arg) (-EINVAL)
+#define con_clear_unimap(vc, ui) (0)
+#define con_set_unimap(vc, ct, list) (0)
+#define con_set_default_unimap(vc) (0)
+#define con_copy_unimap(d, s) (0)
+#define con_get_unimap(vc, ct, uct, list) (-EINVAL)
+#define con_free_unimap(vc) do { ; } while (0)
+#define con_protect_unimap(vc, rdonly) do { ; } while (0)
+
+#define vc_translate(vc, c) (c)
+#endif
+
 /* vt.c */
 int vt_waitactive(int vt);
 void change_console(struct vc_data *new_vc);
diff --git a/include/linux/workqueue.h b/include/linux/workqueue.h
index 14d47120682b..5c158c477ac7 100644
--- a/include/linux/workqueue.h
+++ b/include/linux/workqueue.h
@@ -201,6 +201,8 @@ extern int keventd_up(void);
 extern void init_workqueues(void);
 int execute_in_process_context(work_func_t fn, struct execute_work *);
 
+extern int flush_work(struct work_struct *work);
+
 extern int cancel_work_sync(struct work_struct *work);
 
 /*
diff --git a/include/media/audiochip.h b/include/media/audiochip.h
deleted file mode 100644
index db8823d45a7d..000000000000
--- a/include/media/audiochip.h
+++ /dev/null
@@ -1,26 +0,0 @@
-/*
- */
-
-#ifndef AUDIOCHIP_H
-#define AUDIOCHIP_H
-
-enum audiochip {
-	AUDIO_CHIP_NONE,
-	AUDIO_CHIP_UNKNOWN,
-	/* Provided by video chip */
-	AUDIO_CHIP_INTERNAL,
-	/* Provided by tvaudio.c */
-	AUDIO_CHIP_TDA8425,
-	AUDIO_CHIP_TEA6300,
-	AUDIO_CHIP_TEA6420,
-	AUDIO_CHIP_TDA9840,
-	AUDIO_CHIP_TDA985X,
-	AUDIO_CHIP_TDA9874,
-	AUDIO_CHIP_PIC16C54,
-	/* Provided by msp3400.c */
-	AUDIO_CHIP_MSP34XX,
-	/* Provided by wm8775.c */
-	AUDIO_CHIP_WM8775
-};
-
-#endif /* AUDIOCHIP_H */
diff --git a/include/media/saa7146_vv.h b/include/media/saa7146_vv.h
index 89c442eb8849..1d104096619c 100644
--- a/include/media/saa7146_vv.h
+++ b/include/media/saa7146_vv.h
@@ -2,6 +2,7 @@
 #define __SAA7146_VV__
 
 #include <media/v4l2-common.h>
+#include <media/v4l2-ioctl.h>
 #include <media/saa7146.h>
 #include <media/videobuf-dma-sg.h>
 
diff --git a/include/media/soc_camera.h b/include/media/soc_camera.h
index 1de98f150e99..d548de326722 100644
--- a/include/media/soc_camera.h
+++ b/include/media/soc_camera.h
@@ -14,6 +14,7 @@
 
 #include <linux/videodev2.h>
 #include <media/videobuf-core.h>
+#include <linux/pm.h>
 
 struct soc_camera_device {
 	struct list_head list;
@@ -63,6 +64,8 @@ struct soc_camera_host_ops {
 	struct module *owner;
 	int (*add)(struct soc_camera_device *);
 	void (*remove)(struct soc_camera_device *);
+	int (*suspend)(struct soc_camera_device *, pm_message_t state);
+	int (*resume)(struct soc_camera_device *);
 	int (*set_fmt_cap)(struct soc_camera_device *, __u32,
 			   struct v4l2_rect *);
 	int (*try_fmt_cap)(struct soc_camera_device *, struct v4l2_format *);
@@ -111,6 +114,8 @@ struct soc_camera_ops {
 	struct module *owner;
 	int (*probe)(struct soc_camera_device *);
 	void (*remove)(struct soc_camera_device *);
+	int (*suspend)(struct soc_camera_device *, pm_message_t state);
+	int (*resume)(struct soc_camera_device *);
 	int (*init)(struct soc_camera_device *);
 	int (*release)(struct soc_camera_device *);
 	int (*start_capture)(struct soc_camera_device *);
diff --git a/include/media/tveeprom.h b/include/media/tveeprom.h
index 5660ea24996b..a8ad75a9152a 100644
--- a/include/media/tveeprom.h
+++ b/include/media/tveeprom.h
@@ -3,7 +3,12 @@
 
 struct tveeprom {
 	u32 has_radio;
-	u32 has_ir;     /* bit 0: IR receiver present, bit 1: IR transmitter (blaster) present. -1 == unknown */
+	/* If has_ir == 0, then it is unknown what the IR capabilities are,
+	   otherwise:
+	   bit 0: 1 (= IR capabilities are known)
+	   bit 1: IR receiver present
+	   bit 2: IR transmitter (blaster) present */
+	u32 has_ir;
 	u32 has_MAC_address; /* 0: no MAC, 1: MAC present, 2: unknown */
 
 	u32 tuner_type;
diff --git a/include/media/v4l2-chip-ident.h b/include/media/v4l2-chip-ident.h
index 2a527742701a..41b509babf3f 100644
--- a/include/media/v4l2-chip-ident.h
+++ b/include/media/v4l2-chip-ident.h
@@ -90,7 +90,10 @@ enum {
 	/* module m52790: just ident 52790 */
 	V4L2_IDENT_M52790 = 52790,
 
-	/* module msp34xx: reserved range 34000-34999 */
+	/* module msp3400: reserved range 34000-34999 and 44000-44999 */
+	V4L2_IDENT_MSPX4XX  = 34000, /* generic MSPX4XX identifier, only
+					use internally (tveeprom.c). */
+
 	V4L2_IDENT_MSP3400B = 34002,
 	V4L2_IDENT_MSP3410B = 34102,
 
@@ -142,7 +145,7 @@ enum {
 	V4L2_IDENT_MSP3457G = 34577,
 	V4L2_IDENT_MSP3467G = 34677,
 
-	/* module msp44xx: reserved range 44000-44999 */
+	/* module msp3400: reserved range 34000-34999 and 44000-44999 */
 	V4L2_IDENT_MSP4400G = 44007,
 	V4L2_IDENT_MSP4410G = 44107,
 	V4L2_IDENT_MSP4420G = 44207,
diff --git a/include/media/v4l2-common.h b/include/media/v4l2-common.h
index 020d05758bd8..07d3a9a575d1 100644
--- a/include/media/v4l2-common.h
+++ b/include/media/v4l2-common.h
@@ -28,12 +28,6 @@
 
 #include <media/v4l2-dev.h>
 
-/* v4l debugging and diagnostics */
-
-/* Debug bitmask flags to be used on V4L2 */
-#define V4L2_DEBUG_IOCTL     0x01
-#define V4L2_DEBUG_IOCTL_ARG 0x02
-
 /* Common printk constucts for v4l-i2c drivers. These macros create a unique
    prefix consisting of the driver name, the adapter number and the i2c
    address. */
@@ -61,21 +55,20 @@
 			v4l_client_printk(KERN_DEBUG, client, fmt , ## arg); \
 	} while (0)
 
+/* ------------------------------------------------------------------------- */
 
-/* Use this macro for non-I2C drivers. Pass the driver name as the first arg. */
-#define v4l_print_ioctl(name, cmd)  		 \
-	do {  					 \
-		printk(KERN_DEBUG "%s: ", name); \
-		v4l_printk_ioctl(cmd);		 \
-	} while (0)
+/* Priority helper functions */
 
-/* Use this macro in I2C drivers where 'client' is the struct i2c_client
-   pointer */
-#define v4l_i2c_print_ioctl(client, cmd) 		   \
-	do {      					   \
-		v4l_client_printk(KERN_DEBUG, client, ""); \
-		v4l_printk_ioctl(cmd);			   \
-	} while (0)
+struct v4l2_prio_state {
+	atomic_t prios[4];
+};
+int v4l2_prio_init(struct v4l2_prio_state *global);
+int v4l2_prio_change(struct v4l2_prio_state *global, enum v4l2_priority *local,
+		     enum v4l2_priority new);
+int v4l2_prio_open(struct v4l2_prio_state *global, enum v4l2_priority *local);
+int v4l2_prio_close(struct v4l2_prio_state *global, enum v4l2_priority *local);
+enum v4l2_priority v4l2_prio_max(struct v4l2_prio_state *global);
+int v4l2_prio_check(struct v4l2_prio_state *global, enum v4l2_priority *local);
 
 /* ------------------------------------------------------------------------- */
 
diff --git a/include/media/v4l2-dev.h b/include/media/v4l2-dev.h
index 33f379b1ecfe..2745e1afc722 100644
--- a/include/media/v4l2-dev.h
+++ b/include/media/v4l2-dev.h
@@ -9,7 +9,6 @@
 #ifndef _V4L2_DEV_H
 #define _V4L2_DEV_H
 
-#define OBSOLETE_OWNER   1 /* to be removed soon */
 #define OBSOLETE_DEVDATA 1 /* to be removed soon */
 
 #include <linux/poll.h>
@@ -17,11 +16,7 @@
 #include <linux/device.h>
 #include <linux/mutex.h>
 #include <linux/compiler.h> /* need __user */
-#ifdef CONFIG_VIDEO_V4L1_COMPAT
-#include <linux/videodev.h>
-#else
 #include <linux/videodev2.h>
-#endif
 
 #define VIDEO_MAJOR	81
 /* Minor device allocation */
@@ -39,42 +34,7 @@
 #define VFL_TYPE_RADIO		2
 #define VFL_TYPE_VTX		3
 
-/*  Video standard functions  */
-extern const char *v4l2_norm_to_name(v4l2_std_id id);
-extern int v4l2_video_std_construct(struct v4l2_standard *vs,
-				    int id, const char *name);
-/* Prints the ioctl in a human-readable format */
-extern void v4l_printk_ioctl(unsigned int cmd);
-
-/* prority handling */
-struct v4l2_prio_state {
-	atomic_t prios[4];
-};
-int v4l2_prio_init(struct v4l2_prio_state *global);
-int v4l2_prio_change(struct v4l2_prio_state *global, enum v4l2_priority *local,
-		     enum v4l2_priority new);
-int v4l2_prio_open(struct v4l2_prio_state *global, enum v4l2_priority *local);
-int v4l2_prio_close(struct v4l2_prio_state *global, enum v4l2_priority *local);
-enum v4l2_priority v4l2_prio_max(struct v4l2_prio_state *global);
-int v4l2_prio_check(struct v4l2_prio_state *global, enum v4l2_priority *local);
-
-/* names for fancy debug output */
-extern const char *v4l2_field_names[];
-extern const char *v4l2_type_names[];
-
-/*  Compatibility layer interface  --  v4l1-compat module */
-typedef int (*v4l2_kioctl)(struct inode *inode, struct file *file,
-			   unsigned int cmd, void *arg);
-#ifdef CONFIG_VIDEO_V4L1_COMPAT
-int v4l_compat_translate_ioctl(struct inode *inode, struct file *file,
-			       int cmd, void *arg, v4l2_kioctl driver_ioctl);
-#else
-#define v4l_compat_translate_ioctl(inode,file,cmd,arg,ioctl) -EINVAL
-#endif
-
-/* 32 Bits compatibility layer for 64 bits processors */
-extern long v4l_compat_ioctl32(struct file *file, unsigned int cmd,
-				unsigned long arg);
+struct v4l2_ioctl_callbacks;
 
 /*
  * Newer version of video_device, handled by videodev2.c
@@ -88,18 +48,17 @@ struct video_device
 	const struct file_operations *fops;
 
 	/* sysfs */
-	struct device class_dev;	/* v4l device */
-	struct device *dev;		/* device parent */
+	struct device dev;		/* v4l device */
+	struct device *parent;		/* device parent */
 
 	/* device info */
 	char name[32];
-	int type;       /* v4l1 */
-	int type2;      /* v4l2 */
+	int vfl_type;
 	int minor;
-	/* attribute to diferentiate multiple indexs on one physical device */
+	/* attribute to differentiate multiple indices on one physical device */
 	int index;
 
-	int debug;	/* Activates debug level*/
+	int debug;			/* Activates debug level*/
 
 	/* Video standard vars */
 	v4l2_std_id tvnorms;		/* Supported tv norms */
@@ -109,285 +68,36 @@ struct video_device
 	void (*release)(struct video_device *vfd);
 
 	/* ioctl callbacks */
+	const struct v4l2_ioctl_ops *ioctl_ops;
 
-	/* VIDIOC_QUERYCAP handler */
-	int (*vidioc_querycap)(struct file *file, void *fh, struct v4l2_capability *cap);
-
-	/* Priority handling */
-	int (*vidioc_g_priority)   (struct file *file, void *fh,
-				    enum v4l2_priority *p);
-	int (*vidioc_s_priority)   (struct file *file, void *fh,
-				    enum v4l2_priority p);
-
-	/* VIDIOC_ENUM_FMT handlers */
-	int (*vidioc_enum_fmt_vid_cap)     (struct file *file, void *fh,
-					    struct v4l2_fmtdesc *f);
-	int (*vidioc_enum_fmt_vid_overlay) (struct file *file, void *fh,
-					    struct v4l2_fmtdesc *f);
-	int (*vidioc_enum_fmt_vid_out)     (struct file *file, void *fh,
-					    struct v4l2_fmtdesc *f);
-#if 1
-	/* deprecated, will be removed in 2.6.28 */
-	int (*vidioc_enum_fmt_vbi_cap)     (struct file *file, void *fh,
-					    struct v4l2_fmtdesc *f);
-#endif
-	int (*vidioc_enum_fmt_type_private)(struct file *file, void *fh,
-					    struct v4l2_fmtdesc *f);
-
-	/* VIDIOC_G_FMT handlers */
-	int (*vidioc_g_fmt_vid_cap)    (struct file *file, void *fh,
-					struct v4l2_format *f);
-	int (*vidioc_g_fmt_vid_overlay)(struct file *file, void *fh,
-					struct v4l2_format *f);
-	int (*vidioc_g_fmt_vid_out)    (struct file *file, void *fh,
-					struct v4l2_format *f);
-	int (*vidioc_g_fmt_vid_out_overlay)(struct file *file, void *fh,
-					struct v4l2_format *f);
-	int (*vidioc_g_fmt_vbi_cap)    (struct file *file, void *fh,
-					struct v4l2_format *f);
-	int (*vidioc_g_fmt_vbi_out)    (struct file *file, void *fh,
-					struct v4l2_format *f);
-	int (*vidioc_g_fmt_sliced_vbi_cap)(struct file *file, void *fh,
-					struct v4l2_format *f);
-	int (*vidioc_g_fmt_sliced_vbi_out)(struct file *file, void *fh,
-					struct v4l2_format *f);
-	int (*vidioc_g_fmt_type_private)(struct file *file, void *fh,
-					struct v4l2_format *f);
-
-	/* VIDIOC_S_FMT handlers */
-	int (*vidioc_s_fmt_vid_cap)    (struct file *file, void *fh,
-					struct v4l2_format *f);
-	int (*vidioc_s_fmt_vid_overlay)(struct file *file, void *fh,
-					struct v4l2_format *f);
-	int (*vidioc_s_fmt_vid_out)    (struct file *file, void *fh,
-					struct v4l2_format *f);
-	int (*vidioc_s_fmt_vid_out_overlay)(struct file *file, void *fh,
-					struct v4l2_format *f);
-	int (*vidioc_s_fmt_vbi_cap)    (struct file *file, void *fh,
-					struct v4l2_format *f);
-	int (*vidioc_s_fmt_vbi_out)    (struct file *file, void *fh,
-					struct v4l2_format *f);
-	int (*vidioc_s_fmt_sliced_vbi_cap)(struct file *file, void *fh,
-					struct v4l2_format *f);
-	int (*vidioc_s_fmt_sliced_vbi_out)(struct file *file, void *fh,
-					struct v4l2_format *f);
-	int (*vidioc_s_fmt_type_private)(struct file *file, void *fh,
-					struct v4l2_format *f);
-
-	/* VIDIOC_TRY_FMT handlers */
-	int (*vidioc_try_fmt_vid_cap)    (struct file *file, void *fh,
-					  struct v4l2_format *f);
-	int (*vidioc_try_fmt_vid_overlay)(struct file *file, void *fh,
-					  struct v4l2_format *f);
-	int (*vidioc_try_fmt_vid_out)    (struct file *file, void *fh,
-					  struct v4l2_format *f);
-	int (*vidioc_try_fmt_vid_out_overlay)(struct file *file, void *fh,
-					  struct v4l2_format *f);
-	int (*vidioc_try_fmt_vbi_cap)    (struct file *file, void *fh,
-					  struct v4l2_format *f);
-	int (*vidioc_try_fmt_vbi_out)    (struct file *file, void *fh,
-					  struct v4l2_format *f);
-	int (*vidioc_try_fmt_sliced_vbi_cap)(struct file *file, void *fh,
-					  struct v4l2_format *f);
-	int (*vidioc_try_fmt_sliced_vbi_out)(struct file *file, void *fh,
-					  struct v4l2_format *f);
-	int (*vidioc_try_fmt_type_private)(struct file *file, void *fh,
-					  struct v4l2_format *f);
-
-	/* Buffer handlers */
-	int (*vidioc_reqbufs) (struct file *file, void *fh, struct v4l2_requestbuffers *b);
-	int (*vidioc_querybuf)(struct file *file, void *fh, struct v4l2_buffer *b);
-	int (*vidioc_qbuf)    (struct file *file, void *fh, struct v4l2_buffer *b);
-	int (*vidioc_dqbuf)   (struct file *file, void *fh, struct v4l2_buffer *b);
-
-
-	int (*vidioc_overlay) (struct file *file, void *fh, unsigned int i);
-#ifdef CONFIG_VIDEO_V4L1_COMPAT
-			/* buffer type is struct vidio_mbuf * */
-	int (*vidiocgmbuf)  (struct file *file, void *fh, struct video_mbuf *p);
-#endif
-	int (*vidioc_g_fbuf)   (struct file *file, void *fh,
-				struct v4l2_framebuffer *a);
-	int (*vidioc_s_fbuf)   (struct file *file, void *fh,
-				struct v4l2_framebuffer *a);
-
-		/* Stream on/off */
-	int (*vidioc_streamon) (struct file *file, void *fh, enum v4l2_buf_type i);
-	int (*vidioc_streamoff)(struct file *file, void *fh, enum v4l2_buf_type i);
-
-		/* Standard handling
-			ENUMSTD is handled by videodev.c
-		 */
-	int (*vidioc_g_std) (struct file *file, void *fh, v4l2_std_id *norm);
-	int (*vidioc_s_std) (struct file *file, void *fh, v4l2_std_id *norm);
-	int (*vidioc_querystd) (struct file *file, void *fh, v4l2_std_id *a);
-
-		/* Input handling */
-	int (*vidioc_enum_input)(struct file *file, void *fh,
-				 struct v4l2_input *inp);
-	int (*vidioc_g_input)   (struct file *file, void *fh, unsigned int *i);
-	int (*vidioc_s_input)   (struct file *file, void *fh, unsigned int i);
-
-		/* Output handling */
-	int (*vidioc_enum_output) (struct file *file, void *fh,
-				  struct v4l2_output *a);
-	int (*vidioc_g_output)   (struct file *file, void *fh, unsigned int *i);
-	int (*vidioc_s_output)   (struct file *file, void *fh, unsigned int i);
-
-		/* Control handling */
-	int (*vidioc_queryctrl)        (struct file *file, void *fh,
-					struct v4l2_queryctrl *a);
-	int (*vidioc_g_ctrl)           (struct file *file, void *fh,
-					struct v4l2_control *a);
-	int (*vidioc_s_ctrl)           (struct file *file, void *fh,
-					struct v4l2_control *a);
-	int (*vidioc_g_ext_ctrls)      (struct file *file, void *fh,
-					struct v4l2_ext_controls *a);
-	int (*vidioc_s_ext_ctrls)      (struct file *file, void *fh,
-					struct v4l2_ext_controls *a);
-	int (*vidioc_try_ext_ctrls)    (struct file *file, void *fh,
-					struct v4l2_ext_controls *a);
-	int (*vidioc_querymenu)        (struct file *file, void *fh,
-					struct v4l2_querymenu *a);
-
-	/* Audio ioctls */
-	int (*vidioc_enumaudio)        (struct file *file, void *fh,
-					struct v4l2_audio *a);
-	int (*vidioc_g_audio)          (struct file *file, void *fh,
-					struct v4l2_audio *a);
-	int (*vidioc_s_audio)          (struct file *file, void *fh,
-					struct v4l2_audio *a);
-
-	/* Audio out ioctls */
-	int (*vidioc_enumaudout)       (struct file *file, void *fh,
-					struct v4l2_audioout *a);
-	int (*vidioc_g_audout)         (struct file *file, void *fh,
-					struct v4l2_audioout *a);
-	int (*vidioc_s_audout)         (struct file *file, void *fh,
-					struct v4l2_audioout *a);
-	int (*vidioc_g_modulator)      (struct file *file, void *fh,
-					struct v4l2_modulator *a);
-	int (*vidioc_s_modulator)      (struct file *file, void *fh,
-					struct v4l2_modulator *a);
-	/* Crop ioctls */
-	int (*vidioc_cropcap)          (struct file *file, void *fh,
-					struct v4l2_cropcap *a);
-	int (*vidioc_g_crop)           (struct file *file, void *fh,
-					struct v4l2_crop *a);
-	int (*vidioc_s_crop)           (struct file *file, void *fh,
-					struct v4l2_crop *a);
-	/* Compression ioctls */
-	int (*vidioc_g_jpegcomp)       (struct file *file, void *fh,
-					struct v4l2_jpegcompression *a);
-	int (*vidioc_s_jpegcomp)       (struct file *file, void *fh,
-					struct v4l2_jpegcompression *a);
-	int (*vidioc_g_enc_index)      (struct file *file, void *fh,
-					struct v4l2_enc_idx *a);
-	int (*vidioc_encoder_cmd)      (struct file *file, void *fh,
-					struct v4l2_encoder_cmd *a);
-	int (*vidioc_try_encoder_cmd)  (struct file *file, void *fh,
-					struct v4l2_encoder_cmd *a);
-
-	/* Stream type-dependent parameter ioctls */
-	int (*vidioc_g_parm)           (struct file *file, void *fh,
-					struct v4l2_streamparm *a);
-	int (*vidioc_s_parm)           (struct file *file, void *fh,
-					struct v4l2_streamparm *a);
-
-	/* Tuner ioctls */
-	int (*vidioc_g_tuner)          (struct file *file, void *fh,
-					struct v4l2_tuner *a);
-	int (*vidioc_s_tuner)          (struct file *file, void *fh,
-					struct v4l2_tuner *a);
-	int (*vidioc_g_frequency)      (struct file *file, void *fh,
-					struct v4l2_frequency *a);
-	int (*vidioc_s_frequency)      (struct file *file, void *fh,
-					struct v4l2_frequency *a);
-
-	/* Sliced VBI cap */
-	int (*vidioc_g_sliced_vbi_cap) (struct file *file, void *fh,
-					struct v4l2_sliced_vbi_cap *a);
-
-	/* Log status ioctl */
-	int (*vidioc_log_status)       (struct file *file, void *fh);
-
-	int (*vidioc_s_hw_freq_seek)   (struct file *file, void *fh,
-					struct v4l2_hw_freq_seek *a);
-
-	/* Debugging ioctls */
-#ifdef CONFIG_VIDEO_ADV_DEBUG
-	int (*vidioc_g_register)       (struct file *file, void *fh,
-					struct v4l2_register *reg);
-	int (*vidioc_s_register)       (struct file *file, void *fh,
-					struct v4l2_register *reg);
-#endif
-	int (*vidioc_g_chip_ident)     (struct file *file, void *fh,
-					struct v4l2_chip_ident *chip);
-
-	/* For other private ioctls */
-	int (*vidioc_default)	       (struct file *file, void *fh,
-					int cmd, void *arg);
-
-
-#ifdef OBSOLETE_OWNER /* to be removed soon */
-/* obsolete -- fops->owner is used instead */
-struct module *owner;
-/* dev->driver_data will be used instead some day.
-	* Use the video_{get|set}_drvdata() helper functions,
-	* so the switch over will be transparent for you.
-	* Or use {pci|usb}_{get|set}_drvdata() directly. */
-void *priv;
+#ifdef OBSOLETE_DEVDATA /* to be removed soon */
+	/* dev->driver_data will be used instead some day.
+	 * Use the video_{get|set}_drvdata() helper functions,
+	 * so the switch over will be transparent for you.
+	 * Or use {pci|usb}_{get|set}_drvdata() directly. */
+	void *priv;
 #endif
 
-	/* for videodev.c intenal usage -- please don't touch */
+	/* for videodev.c internal usage -- please don't touch */
 	int users;                     /* video_exclusive_{open|close} ... */
 	struct mutex lock;             /* ... helper function uses these   */
 };
 
 /* Class-dev to video-device */
-#define to_video_device(cd) container_of(cd, struct video_device, class_dev)
+#define to_video_device(cd) container_of(cd, struct video_device, dev)
 
 /* Version 2 functions */
 extern int video_register_device(struct video_device *vfd, int type, int nr);
 int video_register_device_index(struct video_device *vfd, int type, int nr,
 					int index);
 void video_unregister_device(struct video_device *);
-extern int video_ioctl2(struct inode *inode, struct file *file,
-			  unsigned int cmd, unsigned long arg);
 
 /* helper functions to alloc / release struct video_device, the
    later can be used for video_device->release() */
 struct video_device *video_device_alloc(void);
 void video_device_release(struct video_device *vfd);
 
-/* Include support for obsoleted stuff */
-extern int video_usercopy(struct inode *inode, struct file *file,
-			  unsigned int cmd, unsigned long arg,
-			  int (*func)(struct inode *inode, struct file *file,
-				      unsigned int cmd, void *arg));
-
-#ifdef CONFIG_VIDEO_V4L1_COMPAT
-#include <linux/mm.h>
-
-static inline int __must_check
-video_device_create_file(struct video_device *vfd,
-			 struct device_attribute *attr)
-{
-	int ret = device_create_file(&vfd->class_dev, attr);
-	if (ret < 0)
-		printk(KERN_WARNING "%s error: %d\n", __func__, ret);
-	return ret;
-}
-static inline void
-video_device_remove_file(struct video_device *vfd,
-			 struct device_attribute *attr)
-{
-	device_remove_file(&vfd->class_dev, attr);
-}
-
-#endif /* CONFIG_VIDEO_V4L1_COMPAT */
-
-#ifdef OBSOLETE_OWNER /* to be removed soon */
+#ifdef OBSOLETE_DEVDATA /* to be removed soon */
 /* helper functions to access driver private data. */
 static inline void *video_get_drvdata(struct video_device *dev)
 {
@@ -399,9 +109,6 @@ static inline void video_set_drvdata(struct video_device *dev, void *data)
 	dev->priv = data;
 }
 
-#endif
-
-#ifdef OBSOLETE_DEVDATA /* to be removed soon */
 /* Obsolete stuff - Still needed for radio devices and obsolete drivers */
 extern struct video_device* video_devdata(struct file*);
 extern int video_exclusive_open(struct inode *inode, struct file *file);
diff --git a/include/media/v4l2-ioctl.h b/include/media/v4l2-ioctl.h
new file mode 100644
index 000000000000..dc6404618555
--- /dev/null
+++ b/include/media/v4l2-ioctl.h
@@ -0,0 +1,301 @@
+/*
+ *
+ *	V 4 L 2   D R I V E R   H E L P E R   A P I
+ *
+ * Moved from videodev2.h
+ *
+ *	Some commonly needed functions for drivers (v4l2-common.o module)
+ */
+#ifndef _V4L2_IOCTL_H
+#define _V4L2_IOCTL_H
+
+#include <linux/poll.h>
+#include <linux/fs.h>
+#include <linux/device.h>
+#include <linux/mutex.h>
+#include <linux/compiler.h> /* need __user */
+#ifdef CONFIG_VIDEO_V4L1_COMPAT
+#include <linux/videodev.h>
+#else
+#include <linux/videodev2.h>
+#endif
+
+struct v4l2_ioctl_ops {
+	/* ioctl callbacks */
+
+	/* VIDIOC_QUERYCAP handler */
+	int (*vidioc_querycap)(struct file *file, void *fh, struct v4l2_capability *cap);
+
+	/* Priority handling */
+	int (*vidioc_g_priority)   (struct file *file, void *fh,
+				    enum v4l2_priority *p);
+	int (*vidioc_s_priority)   (struct file *file, void *fh,
+				    enum v4l2_priority p);
+
+	/* VIDIOC_ENUM_FMT handlers */
+	int (*vidioc_enum_fmt_vid_cap)     (struct file *file, void *fh,
+					    struct v4l2_fmtdesc *f);
+	int (*vidioc_enum_fmt_vid_overlay) (struct file *file, void *fh,
+					    struct v4l2_fmtdesc *f);
+	int (*vidioc_enum_fmt_vid_out)     (struct file *file, void *fh,
+					    struct v4l2_fmtdesc *f);
+#if 1
+	/* deprecated, will be removed in 2.6.28 */
+	int (*vidioc_enum_fmt_vbi_cap)     (struct file *file, void *fh,
+					    struct v4l2_fmtdesc *f);
+#endif
+	int (*vidioc_enum_fmt_type_private)(struct file *file, void *fh,
+					    struct v4l2_fmtdesc *f);
+
+	/* VIDIOC_G_FMT handlers */
+	int (*vidioc_g_fmt_vid_cap)    (struct file *file, void *fh,
+					struct v4l2_format *f);
+	int (*vidioc_g_fmt_vid_overlay)(struct file *file, void *fh,
+					struct v4l2_format *f);
+	int (*vidioc_g_fmt_vid_out)    (struct file *file, void *fh,
+					struct v4l2_format *f);
+	int (*vidioc_g_fmt_vid_out_overlay)(struct file *file, void *fh,
+					struct v4l2_format *f);
+	int (*vidioc_g_fmt_vbi_cap)    (struct file *file, void *fh,
+					struct v4l2_format *f);
+	int (*vidioc_g_fmt_vbi_out)    (struct file *file, void *fh,
+					struct v4l2_format *f);
+	int (*vidioc_g_fmt_sliced_vbi_cap)(struct file *file, void *fh,
+					struct v4l2_format *f);
+	int (*vidioc_g_fmt_sliced_vbi_out)(struct file *file, void *fh,
+					struct v4l2_format *f);
+	int (*vidioc_g_fmt_type_private)(struct file *file, void *fh,
+					struct v4l2_format *f);
+
+	/* VIDIOC_S_FMT handlers */
+	int (*vidioc_s_fmt_vid_cap)    (struct file *file, void *fh,
+					struct v4l2_format *f);
+	int (*vidioc_s_fmt_vid_overlay)(struct file *file, void *fh,
+					struct v4l2_format *f);
+	int (*vidioc_s_fmt_vid_out)    (struct file *file, void *fh,
+					struct v4l2_format *f);
+	int (*vidioc_s_fmt_vid_out_overlay)(struct file *file, void *fh,
+					struct v4l2_format *f);
+	int (*vidioc_s_fmt_vbi_cap)    (struct file *file, void *fh,
+					struct v4l2_format *f);
+	int (*vidioc_s_fmt_vbi_out)    (struct file *file, void *fh,
+					struct v4l2_format *f);
+	int (*vidioc_s_fmt_sliced_vbi_cap)(struct file *file, void *fh,
+					struct v4l2_format *f);
+	int (*vidioc_s_fmt_sliced_vbi_out)(struct file *file, void *fh,
+					struct v4l2_format *f);
+	int (*vidioc_s_fmt_type_private)(struct file *file, void *fh,
+					struct v4l2_format *f);
+
+	/* VIDIOC_TRY_FMT handlers */
+	int (*vidioc_try_fmt_vid_cap)    (struct file *file, void *fh,
+					  struct v4l2_format *f);
+	int (*vidioc_try_fmt_vid_overlay)(struct file *file, void *fh,
+					  struct v4l2_format *f);
+	int (*vidioc_try_fmt_vid_out)    (struct file *file, void *fh,
+					  struct v4l2_format *f);
+	int (*vidioc_try_fmt_vid_out_overlay)(struct file *file, void *fh,
+					  struct v4l2_format *f);
+	int (*vidioc_try_fmt_vbi_cap)    (struct file *file, void *fh,
+					  struct v4l2_format *f);
+	int (*vidioc_try_fmt_vbi_out)    (struct file *file, void *fh,
+					  struct v4l2_format *f);
+	int (*vidioc_try_fmt_sliced_vbi_cap)(struct file *file, void *fh,
+					  struct v4l2_format *f);
+	int (*vidioc_try_fmt_sliced_vbi_out)(struct file *file, void *fh,
+					  struct v4l2_format *f);
+	int (*vidioc_try_fmt_type_private)(struct file *file, void *fh,
+					  struct v4l2_format *f);
+
+	/* Buffer handlers */
+	int (*vidioc_reqbufs) (struct file *file, void *fh, struct v4l2_requestbuffers *b);
+	int (*vidioc_querybuf)(struct file *file, void *fh, struct v4l2_buffer *b);
+	int (*vidioc_qbuf)    (struct file *file, void *fh, struct v4l2_buffer *b);
+	int (*vidioc_dqbuf)   (struct file *file, void *fh, struct v4l2_buffer *b);
+
+
+	int (*vidioc_overlay) (struct file *file, void *fh, unsigned int i);
+#ifdef CONFIG_VIDEO_V4L1_COMPAT
+			/* buffer type is struct vidio_mbuf * */
+	int (*vidiocgmbuf)  (struct file *file, void *fh, struct video_mbuf *p);
+#endif
+	int (*vidioc_g_fbuf)   (struct file *file, void *fh,
+				struct v4l2_framebuffer *a);
+	int (*vidioc_s_fbuf)   (struct file *file, void *fh,
+				struct v4l2_framebuffer *a);
+
+		/* Stream on/off */
+	int (*vidioc_streamon) (struct file *file, void *fh, enum v4l2_buf_type i);
+	int (*vidioc_streamoff)(struct file *file, void *fh, enum v4l2_buf_type i);
+
+		/* Standard handling
+			ENUMSTD is handled by videodev.c
+		 */
+	int (*vidioc_g_std) (struct file *file, void *fh, v4l2_std_id *norm);
+	int (*vidioc_s_std) (struct file *file, void *fh, v4l2_std_id *norm);
+	int (*vidioc_querystd) (struct file *file, void *fh, v4l2_std_id *a);
+
+		/* Input handling */
+	int (*vidioc_enum_input)(struct file *file, void *fh,
+				 struct v4l2_input *inp);
+	int (*vidioc_g_input)   (struct file *file, void *fh, unsigned int *i);
+	int (*vidioc_s_input)   (struct file *file, void *fh, unsigned int i);
+
+		/* Output handling */
+	int (*vidioc_enum_output) (struct file *file, void *fh,
+				  struct v4l2_output *a);
+	int (*vidioc_g_output)   (struct file *file, void *fh, unsigned int *i);
+	int (*vidioc_s_output)   (struct file *file, void *fh, unsigned int i);
+
+		/* Control handling */
+	int (*vidioc_queryctrl)        (struct file *file, void *fh,
+					struct v4l2_queryctrl *a);
+	int (*vidioc_g_ctrl)           (struct file *file, void *fh,
+					struct v4l2_control *a);
+	int (*vidioc_s_ctrl)           (struct file *file, void *fh,
+					struct v4l2_control *a);
+	int (*vidioc_g_ext_ctrls)      (struct file *file, void *fh,
+					struct v4l2_ext_controls *a);
+	int (*vidioc_s_ext_ctrls)      (struct file *file, void *fh,
+					struct v4l2_ext_controls *a);
+	int (*vidioc_try_ext_ctrls)    (struct file *file, void *fh,
+					struct v4l2_ext_controls *a);
+	int (*vidioc_querymenu)        (struct file *file, void *fh,
+					struct v4l2_querymenu *a);
+
+	/* Audio ioctls */
+	int (*vidioc_enumaudio)        (struct file *file, void *fh,
+					struct v4l2_audio *a);
+	int (*vidioc_g_audio)          (struct file *file, void *fh,
+					struct v4l2_audio *a);
+	int (*vidioc_s_audio)          (struct file *file, void *fh,
+					struct v4l2_audio *a);
+
+	/* Audio out ioctls */
+	int (*vidioc_enumaudout)       (struct file *file, void *fh,
+					struct v4l2_audioout *a);
+	int (*vidioc_g_audout)         (struct file *file, void *fh,
+					struct v4l2_audioout *a);
+	int (*vidioc_s_audout)         (struct file *file, void *fh,
+					struct v4l2_audioout *a);
+	int (*vidioc_g_modulator)      (struct file *file, void *fh,
+					struct v4l2_modulator *a);
+	int (*vidioc_s_modulator)      (struct file *file, void *fh,
+					struct v4l2_modulator *a);
+	/* Crop ioctls */
+	int (*vidioc_cropcap)          (struct file *file, void *fh,
+					struct v4l2_cropcap *a);
+	int (*vidioc_g_crop)           (struct file *file, void *fh,
+					struct v4l2_crop *a);
+	int (*vidioc_s_crop)           (struct file *file, void *fh,
+					struct v4l2_crop *a);
+	/* Compression ioctls */
+	int (*vidioc_g_jpegcomp)       (struct file *file, void *fh,
+					struct v4l2_jpegcompression *a);
+	int (*vidioc_s_jpegcomp)       (struct file *file, void *fh,
+					struct v4l2_jpegcompression *a);
+	int (*vidioc_g_enc_index)      (struct file *file, void *fh,
+					struct v4l2_enc_idx *a);
+	int (*vidioc_encoder_cmd)      (struct file *file, void *fh,
+					struct v4l2_encoder_cmd *a);
+	int (*vidioc_try_encoder_cmd)  (struct file *file, void *fh,
+					struct v4l2_encoder_cmd *a);
+
+	/* Stream type-dependent parameter ioctls */
+	int (*vidioc_g_parm)           (struct file *file, void *fh,
+					struct v4l2_streamparm *a);
+	int (*vidioc_s_parm)           (struct file *file, void *fh,
+					struct v4l2_streamparm *a);
+
+	/* Tuner ioctls */
+	int (*vidioc_g_tuner)          (struct file *file, void *fh,
+					struct v4l2_tuner *a);
+	int (*vidioc_s_tuner)          (struct file *file, void *fh,
+					struct v4l2_tuner *a);
+	int (*vidioc_g_frequency)      (struct file *file, void *fh,
+					struct v4l2_frequency *a);
+	int (*vidioc_s_frequency)      (struct file *file, void *fh,
+					struct v4l2_frequency *a);
+
+	/* Sliced VBI cap */
+	int (*vidioc_g_sliced_vbi_cap) (struct file *file, void *fh,
+					struct v4l2_sliced_vbi_cap *a);
+
+	/* Log status ioctl */
+	int (*vidioc_log_status)       (struct file *file, void *fh);
+
+	int (*vidioc_s_hw_freq_seek)   (struct file *file, void *fh,
+					struct v4l2_hw_freq_seek *a);
+
+	/* Debugging ioctls */
+#ifdef CONFIG_VIDEO_ADV_DEBUG
+	int (*vidioc_g_register)       (struct file *file, void *fh,
+					struct v4l2_register *reg);
+	int (*vidioc_s_register)       (struct file *file, void *fh,
+					struct v4l2_register *reg);
+#endif
+	int (*vidioc_g_chip_ident)     (struct file *file, void *fh,
+					struct v4l2_chip_ident *chip);
+
+	/* For other private ioctls */
+	int (*vidioc_default)	       (struct file *file, void *fh,
+					int cmd, void *arg);
+};
+
+
+/* v4l debugging and diagnostics */
+
+/* Debug bitmask flags to be used on V4L2 */
+#define V4L2_DEBUG_IOCTL     0x01
+#define V4L2_DEBUG_IOCTL_ARG 0x02
+
+/* Use this macro for non-I2C drivers. Pass the driver name as the first arg. */
+#define v4l_print_ioctl(name, cmd)  		 \
+	do {  					 \
+		printk(KERN_DEBUG "%s: ", name); \
+		v4l_printk_ioctl(cmd);		 \
+	} while (0)
+
+/* Use this macro in I2C drivers where 'client' is the struct i2c_client
+   pointer */
+#define v4l_i2c_print_ioctl(client, cmd) 		   \
+	do {      					   \
+		v4l_client_printk(KERN_DEBUG, client, ""); \
+		v4l_printk_ioctl(cmd);			   \
+	} while (0)
+
+/*  Video standard functions  */
+extern const char *v4l2_norm_to_name(v4l2_std_id id);
+extern int v4l2_video_std_construct(struct v4l2_standard *vs,
+				    int id, const char *name);
+/* Prints the ioctl in a human-readable format */
+extern void v4l_printk_ioctl(unsigned int cmd);
+
+/* names for fancy debug output */
+extern const char *v4l2_field_names[];
+extern const char *v4l2_type_names[];
+
+/*  Compatibility layer interface  --  v4l1-compat module */
+typedef int (*v4l2_kioctl)(struct inode *inode, struct file *file,
+			   unsigned int cmd, void *arg);
+#ifdef CONFIG_VIDEO_V4L1_COMPAT
+int v4l_compat_translate_ioctl(struct inode *inode, struct file *file,
+			       int cmd, void *arg, v4l2_kioctl driver_ioctl);
+#else
+#define v4l_compat_translate_ioctl(inode, file, cmd, arg, ioctl) (-EINVAL)
+#endif
+
+/* 32 Bits compatibility layer for 64 bits processors */
+extern long v4l_compat_ioctl32(struct file *file, unsigned int cmd,
+				unsigned long arg);
+
+extern int video_ioctl2(struct inode *inode, struct file *file,
+			  unsigned int cmd, unsigned long arg);
+
+/* Include support for obsoleted stuff */
+extern int video_usercopy(struct inode *inode, struct file *file,
+			  unsigned int cmd, unsigned long arg,
+			  int (*func)(struct inode *inode, struct file *file,
+				      unsigned int cmd, void *arg));
+
+#endif /* _V4L2_IOCTL_H */
diff --git a/include/mtd/inftl-user.h b/include/mtd/inftl-user.h
index 9b1e2526b45e..e17eda302b2d 100644
--- a/include/mtd/inftl-user.h
+++ b/include/mtd/inftl-user.h
@@ -1,6 +1,4 @@
 /*
- * $Id: inftl-user.h,v 1.2 2005/11/07 11:14:56 gleixner Exp $
- *
  * Parts of INFTL headers shared with userspace
  *
  */
diff --git a/include/mtd/jffs2-user.h b/include/mtd/jffs2-user.h
index d508ef0ae091..001685d7fa88 100644
--- a/include/mtd/jffs2-user.h
+++ b/include/mtd/jffs2-user.h
@@ -1,6 +1,4 @@
 /*
- * $Id: jffs2-user.h,v 1.1 2004/05/05 11:57:54 dwmw2 Exp $
- *
  * JFFS2 definitions for use in user space only
  */
 
diff --git a/include/mtd/mtd-abi.h b/include/mtd/mtd-abi.h
index 615072c4da04..c6c61cd5a254 100644
--- a/include/mtd/mtd-abi.h
+++ b/include/mtd/mtd-abi.h
@@ -1,6 +1,4 @@
 /*
- * $Id: mtd-abi.h,v 1.13 2005/11/07 11:14:56 gleixner Exp $
- *
  * Portions of MTD ABI definition which are shared by kernel and user space
  */
 
diff --git a/include/mtd/mtd-user.h b/include/mtd/mtd-user.h
index 713f34d3e62e..170ceca3b2d0 100644
--- a/include/mtd/mtd-user.h
+++ b/include/mtd/mtd-user.h
@@ -1,6 +1,4 @@
 /*
- * $Id: mtd-user.h,v 1.2 2004/05/05 14:44:57 dwmw2 Exp $
- *
  * MTD ABI header for use by user space only.
  */
 
diff --git a/include/mtd/nftl-user.h b/include/mtd/nftl-user.h
index b2bca18e7311..390d21c080aa 100644
--- a/include/mtd/nftl-user.h
+++ b/include/mtd/nftl-user.h
@@ -1,6 +1,4 @@
 /*
- * $Id: nftl-user.h,v 1.2 2005/11/07 11:14:56 gleixner Exp $
- *
  * Parts of NFTL headers shared with userspace
  *
  */
diff --git a/include/mtd/ubi-user.h b/include/mtd/ubi-user.h
index a7421f130cc0..ccdc562e444e 100644
--- a/include/mtd/ubi-user.h
+++ b/include/mtd/ubi-user.h
@@ -58,6 +58,13 @@
  * device should be used. A &struct ubi_rsvol_req object has to be properly
  * filled and a pointer to it has to be passed to the IOCTL.
  *
+ * UBI volumes re-name
+ * ~~~~~~~~~~~~~~~~~~~
+ *
+ * To re-name several volumes atomically at one go, the %UBI_IOCRNVOL command
+ * of the UBI character device should be used. A &struct ubi_rnvol_req object
+ * has to be properly filled and a pointer to it has to be passed to the IOCTL.
+ *
  * UBI volume update
  * ~~~~~~~~~~~~~~~~~
  *
@@ -104,6 +111,8 @@
 #define UBI_IOCRMVOL _IOW(UBI_IOC_MAGIC, 1, int32_t)
 /* Re-size an UBI volume */
 #define UBI_IOCRSVOL _IOW(UBI_IOC_MAGIC, 2, struct ubi_rsvol_req)
+/* Re-name volumes */
+#define UBI_IOCRNVOL _IOW(UBI_IOC_MAGIC, 3, struct ubi_rnvol_req)
 
 /* IOCTL commands of the UBI control character device */
 
@@ -128,6 +137,9 @@
 /* Maximum MTD device name length supported by UBI */
 #define MAX_UBI_MTD_NAME_LEN 127
 
+/* Maximum amount of UBI volumes that can be re-named at one go */
+#define UBI_MAX_RNVOL 32
+
 /*
  * UBI data type hint constants.
  *
@@ -176,20 +188,20 @@ enum {
  * it will be 512 in case of a 2KiB page NAND flash with 4 512-byte sub-pages.
  *
  * But in rare cases, if this optimizes things, the VID header may be placed to
- * a different offset. For example, the boot-loader might do things faster if the
- * VID header sits at the end of the first 2KiB NAND page with 4 sub-pages. As
- * the boot-loader would not normally need to read EC headers (unless it needs
- * UBI in RW mode), it might be faster to calculate ECC. This is weird example,
- * but it real-life example. So, in this example, @vid_hdr_offer would be
- * 2KiB-64 bytes = 1984. Note, that this position is not even 512-bytes
- * aligned, which is OK, as UBI is clever enough to realize this is 4th sub-page
- * of the first page and add needed padding.
+ * a different offset. For example, the boot-loader might do things faster if
+ * the VID header sits at the end of the first 2KiB NAND page with 4 sub-pages.
+ * As the boot-loader would not normally need to read EC headers (unless it
+ * needs UBI in RW mode), it might be faster to calculate ECC. This is weird
+ * example, but it real-life example. So, in this example, @vid_hdr_offer would
+ * be 2KiB-64 bytes = 1984. Note, that this position is not even 512-bytes
+ * aligned, which is OK, as UBI is clever enough to realize this is 4th
+ * sub-page of the first page and add needed padding.
  */
 struct ubi_attach_req {
 	int32_t ubi_num;
 	int32_t mtd_num;
 	int32_t vid_hdr_offset;
-	uint8_t padding[12];
+	int8_t padding[12];
 };
 
 /**
@@ -251,6 +263,48 @@ struct ubi_rsvol_req {
 } __attribute__ ((packed));
 
 /**
+ * struct ubi_rnvol_req - volumes re-name request.
+ * @count: count of volumes to re-name
+ * @padding1:  reserved for future, not used, has to be zeroed
+ * @vol_id: ID of the volume to re-name
+ * @name_len: name length
+ * @padding2:  reserved for future, not used, has to be zeroed
+ * @name: new volume name
+ *
+ * UBI allows to re-name up to %32 volumes at one go. The count of volumes to
+ * re-name is specified in the @count field. The ID of the volumes to re-name
+ * and the new names are specified in the @vol_id and @name fields.
+ *
+ * The UBI volume re-name operation is atomic, which means that should power cut
+ * happen, the volumes will have either old name or new name. So the possible
+ * use-cases of this command is atomic upgrade. Indeed, to upgrade, say, volumes
+ * A and B one may create temporary volumes %A1 and %B1 with the new contents,
+ * then atomically re-name A1->A and B1->B, in which case old %A and %B will
+ * be removed.
+ *
+ * If it is not desirable to remove old A and B, the re-name request has to
+ * contain 4 entries: A1->A, A->A1, B1->B, B->B1, in which case old A1 and B1
+ * become A and B, and old A and B will become A1 and B1.
+ *
+ * It is also OK to request: A1->A, A1->X, B1->B, B->Y, in which case old A1
+ * and B1 become A and B, and old A and B become X and Y.
+ *
+ * In other words, in case of re-naming into an existing volume name, the
+ * existing volume is removed, unless it is re-named as well at the same
+ * re-name request.
+ */
+struct ubi_rnvol_req {
+	int32_t count;
+	int8_t padding1[12];
+	struct {
+		int32_t vol_id;
+		int16_t name_len;
+		int8_t  padding2[2];
+		char    name[UBI_MAX_VOLUME_NAME + 1];
+	} ents[UBI_MAX_RNVOL];
+} __attribute__ ((packed));
+
+/**
  * struct ubi_leb_change_req - a data structure used in atomic logical
  *                             eraseblock change requests.
  * @lnum: logical eraseblock number to change
@@ -261,8 +315,8 @@ struct ubi_rsvol_req {
 struct ubi_leb_change_req {
 	int32_t lnum;
 	int32_t bytes;
-	uint8_t dtype;
-	uint8_t padding[7];
+	int8_t  dtype;
+	int8_t  padding[7];
 } __attribute__ ((packed));
 
 #endif /* __UBI_USER_H__ */
diff --git a/include/net/addrconf.h b/include/net/addrconf.h
index 06b28142b3ab..c216de528b08 100644
--- a/include/net/addrconf.h
+++ b/include/net/addrconf.h
@@ -80,7 +80,8 @@ extern struct inet6_ifaddr      *ipv6_get_ifaddr(struct net *net,
 						 struct net_device *dev,
 						 int strict);
 
-extern int			ipv6_dev_get_saddr(struct net_device *dev, 
+extern int			ipv6_dev_get_saddr(struct net *net,
+					       struct net_device *dev,
 					       const struct in6_addr *daddr,
 					       unsigned int srcprefs,
 					       struct in6_addr *saddr);
diff --git a/include/net/af_unix.h b/include/net/af_unix.h
index 2dfa96b0575e..7dd29b7e461d 100644
--- a/include/net/af_unix.h
+++ b/include/net/af_unix.h
@@ -51,7 +51,7 @@ struct unix_sock {
         struct sock		*peer;
         struct sock		*other;
 	struct list_head	link;
-        atomic_t                inflight;
+        atomic_long_t           inflight;
         spinlock_t		lock;
 	unsigned int		gc_candidate : 1;
         wait_queue_head_t       peer_wait;
diff --git a/include/net/dst.h b/include/net/dst.h
index c5c318a628f8..8a8b71e5f3f1 100644
--- a/include/net/dst.h
+++ b/include/net/dst.h
@@ -252,17 +252,7 @@ static inline int dst_output(struct sk_buff *skb)
 /* Input packet from network to transport.  */
 static inline int dst_input(struct sk_buff *skb)
 {
-	int err;
-
-	for (;;) {
-		err = skb->dst->input(skb);
-
-		if (likely(err == 0))
-			return err;
-		/* Oh, Jamal... Seems, I will not forgive you this mess. :-) */
-		if (unlikely(err != NET_XMIT_BYPASS))
-			return err;
-	}
+	return skb->dst->input(skb);
 }
 
 static inline struct dst_entry *dst_check(struct dst_entry *dst, u32 cookie)
diff --git a/include/net/flow.h b/include/net/flow.h
index ad16e0076c89..228b2477ceec 100644
--- a/include/net/flow.h
+++ b/include/net/flow.h
@@ -47,7 +47,6 @@ struct flowi {
 #define fl4_scope	nl_u.ip4_u.scope
 
 	__u8	proto;
-	__u8	flags;
 	union {
 		struct {
 			__be16	sport;
diff --git a/include/net/ieee80211_radiotap.h b/include/net/ieee80211_radiotap.h
index dfd8bf66ce27..d364fd594ea4 100644
--- a/include/net/ieee80211_radiotap.h
+++ b/include/net/ieee80211_radiotap.h
@@ -262,7 +262,7 @@ static inline int ieee80211_get_radiotap_len(unsigned char *data)
 	struct ieee80211_radiotap_header *hdr =
 		(struct ieee80211_radiotap_header *)data;
 
-	return le16_to_cpu(get_unaligned(&hdr->it_len));
+	return get_unaligned_le16(&hdr->it_len);
 }
 
 #endif				/* IEEE80211_RADIOTAP_H */
diff --git a/include/net/ip.h b/include/net/ip.h
index b5862b975207..250e6ef025a4 100644
--- a/include/net/ip.h
+++ b/include/net/ip.h
@@ -188,6 +188,8 @@ extern int sysctl_ip_dynaddr;
 
 extern void ipfrag_init(void);
 
+extern void ip_static_sysctl_init(void);
+
 #ifdef CONFIG_INET
 #include <net/dst.h>
 
diff --git a/include/net/ip6_route.h b/include/net/ip6_route.h
index 2f8b3c06a101..5f53db7e4e57 100644
--- a/include/net/ip6_route.h
+++ b/include/net/ip6_route.h
@@ -38,11 +38,6 @@ struct route_info {
 #define RT6_LOOKUP_F_SRCPREF_COA	0x00000020
 
 
-#ifdef CONFIG_IPV6_MULTIPLE_TABLES
-extern struct rt6_info	*ip6_prohibit_entry;
-extern struct rt6_info	*ip6_blk_hole_entry;
-#endif
-
 extern void			ip6_route_input(struct sk_buff *skb);
 
 extern struct dst_entry *	ip6_route_output(struct net *net,
@@ -112,13 +107,13 @@ struct rt6_rtnl_dump_arg
 {
 	struct sk_buff *skb;
 	struct netlink_callback *cb;
+	struct net *net;
 };
 
 extern int rt6_dump_route(struct rt6_info *rt, void *p_arg);
 extern void rt6_ifdown(struct net *net, struct net_device *dev);
 extern void rt6_mtu_change(struct net_device *dev, unsigned mtu);
 
-extern rwlock_t rt6_lock;
 
 /*
  *	Store a destination cache entry in a socket
diff --git a/include/net/ip_vs.h b/include/net/ip_vs.h
index 9a51ebad3f1f..7312c3dd309f 100644
--- a/include/net/ip_vs.h
+++ b/include/net/ip_vs.h
@@ -3,254 +3,17 @@
  *      data structure and functionality definitions
  */
 
-#ifndef _IP_VS_H
-#define _IP_VS_H
-
-#include <asm/types.h>		/* For __uXX types */
-#include <linux/types.h>	/* For __beXX types in userland */
-
-#include <linux/sysctl.h>	/* For ctl_path */
-
-#define IP_VS_VERSION_CODE	0x010201
-#define NVERSION(version)			\
-	(version >> 16) & 0xFF,			\
-	(version >> 8) & 0xFF,			\
-	version & 0xFF
-
-/*
- *      Virtual Service Flags
- */
-#define IP_VS_SVC_F_PERSISTENT	0x0001		/* persistent port */
-#define IP_VS_SVC_F_HASHED	0x0002		/* hashed entry */
-
-/*
- *      Destination Server Flags
- */
-#define IP_VS_DEST_F_AVAILABLE	0x0001		/* server is available */
-#define IP_VS_DEST_F_OVERLOAD	0x0002		/* server is overloaded */
-
-/*
- *      IPVS sync daemon states
- */
-#define IP_VS_STATE_NONE	0x0000		/* daemon is stopped */
-#define IP_VS_STATE_MASTER	0x0001		/* started as master */
-#define IP_VS_STATE_BACKUP	0x0002		/* started as backup */
-
-/*
- *      IPVS socket options
- */
-#define IP_VS_BASE_CTL		(64+1024+64)		/* base */
-
-#define IP_VS_SO_SET_NONE	IP_VS_BASE_CTL		/* just peek */
-#define IP_VS_SO_SET_INSERT	(IP_VS_BASE_CTL+1)
-#define IP_VS_SO_SET_ADD	(IP_VS_BASE_CTL+2)
-#define IP_VS_SO_SET_EDIT	(IP_VS_BASE_CTL+3)
-#define IP_VS_SO_SET_DEL	(IP_VS_BASE_CTL+4)
-#define IP_VS_SO_SET_FLUSH	(IP_VS_BASE_CTL+5)
-#define IP_VS_SO_SET_LIST	(IP_VS_BASE_CTL+6)
-#define IP_VS_SO_SET_ADDDEST	(IP_VS_BASE_CTL+7)
-#define IP_VS_SO_SET_DELDEST	(IP_VS_BASE_CTL+8)
-#define IP_VS_SO_SET_EDITDEST	(IP_VS_BASE_CTL+9)
-#define IP_VS_SO_SET_TIMEOUT	(IP_VS_BASE_CTL+10)
-#define IP_VS_SO_SET_STARTDAEMON (IP_VS_BASE_CTL+11)
-#define IP_VS_SO_SET_STOPDAEMON (IP_VS_BASE_CTL+12)
-#define IP_VS_SO_SET_RESTORE    (IP_VS_BASE_CTL+13)
-#define IP_VS_SO_SET_SAVE       (IP_VS_BASE_CTL+14)
-#define IP_VS_SO_SET_ZERO	(IP_VS_BASE_CTL+15)
-#define IP_VS_SO_SET_MAX	IP_VS_SO_SET_ZERO
-
-#define IP_VS_SO_GET_VERSION	IP_VS_BASE_CTL
-#define IP_VS_SO_GET_INFO	(IP_VS_BASE_CTL+1)
-#define IP_VS_SO_GET_SERVICES	(IP_VS_BASE_CTL+2)
-#define IP_VS_SO_GET_SERVICE	(IP_VS_BASE_CTL+3)
-#define IP_VS_SO_GET_DESTS	(IP_VS_BASE_CTL+4)
-#define IP_VS_SO_GET_DEST	(IP_VS_BASE_CTL+5)	/* not used now */
-#define IP_VS_SO_GET_TIMEOUT	(IP_VS_BASE_CTL+6)
-#define IP_VS_SO_GET_DAEMON	(IP_VS_BASE_CTL+7)
-#define IP_VS_SO_GET_MAX	IP_VS_SO_GET_DAEMON
-
-
-/*
- *      IPVS Connection Flags
- */
-#define IP_VS_CONN_F_FWD_MASK	0x0007		/* mask for the fwd methods */
-#define IP_VS_CONN_F_MASQ	0x0000		/* masquerading/NAT */
-#define IP_VS_CONN_F_LOCALNODE	0x0001		/* local node */
-#define IP_VS_CONN_F_TUNNEL	0x0002		/* tunneling */
-#define IP_VS_CONN_F_DROUTE	0x0003		/* direct routing */
-#define IP_VS_CONN_F_BYPASS	0x0004		/* cache bypass */
-#define IP_VS_CONN_F_SYNC	0x0020		/* entry created by sync */
-#define IP_VS_CONN_F_HASHED	0x0040		/* hashed entry */
-#define IP_VS_CONN_F_NOOUTPUT	0x0080		/* no output packets */
-#define IP_VS_CONN_F_INACTIVE	0x0100		/* not established */
-#define IP_VS_CONN_F_OUT_SEQ	0x0200		/* must do output seq adjust */
-#define IP_VS_CONN_F_IN_SEQ	0x0400		/* must do input seq adjust */
-#define IP_VS_CONN_F_SEQ_MASK	0x0600		/* in/out sequence mask */
-#define IP_VS_CONN_F_NO_CPORT	0x0800		/* no client port set yet */
-#define IP_VS_CONN_F_TEMPLATE	0x1000		/* template, not connection */
-
-/* Move it to better place one day, for now keep it unique */
-#define NFC_IPVS_PROPERTY	0x10000
-
-#define IP_VS_SCHEDNAME_MAXLEN	16
-#define IP_VS_IFNAME_MAXLEN	16
-
-
-/*
- *	The struct ip_vs_service_user and struct ip_vs_dest_user are
- *	used to set IPVS rules through setsockopt.
- */
-struct ip_vs_service_user {
-	/* virtual service addresses */
-	u_int16_t		protocol;
-	__be32			addr;		/* virtual ip address */
-	__be16			port;
-	u_int32_t		fwmark;		/* firwall mark of service */
-
-	/* virtual service options */
-	char			sched_name[IP_VS_SCHEDNAME_MAXLEN];
-	unsigned		flags;		/* virtual service flags */
-	unsigned		timeout;	/* persistent timeout in sec */
-	__be32			netmask;	/* persistent netmask */
-};
-
-
-struct ip_vs_dest_user {
-	/* destination server address */
-	__be32			addr;
-	__be16			port;
-
-	/* real server options */
-	unsigned		conn_flags;	/* connection flags */
-	int			weight;		/* destination weight */
-
-	/* thresholds for active connections */
-	u_int32_t		u_threshold;	/* upper threshold */
-	u_int32_t		l_threshold;	/* lower threshold */
-};
-
-
-/*
- *	IPVS statistics object (for user space)
- */
-struct ip_vs_stats_user
-{
-	__u32                   conns;          /* connections scheduled */
-	__u32                   inpkts;         /* incoming packets */
-	__u32                   outpkts;        /* outgoing packets */
-	__u64                   inbytes;        /* incoming bytes */
-	__u64                   outbytes;       /* outgoing bytes */
-
-	__u32			cps;		/* current connection rate */
-	__u32			inpps;		/* current in packet rate */
-	__u32			outpps;		/* current out packet rate */
-	__u32			inbps;		/* current in byte rate */
-	__u32			outbps;		/* current out byte rate */
-};
-
-
-/* The argument to IP_VS_SO_GET_INFO */
-struct ip_vs_getinfo {
-	/* version number */
-	unsigned int		version;
-
-	/* size of connection hash table */
-	unsigned int		size;
-
-	/* number of virtual services */
-	unsigned int		num_services;
-};
-
-
-/* The argument to IP_VS_SO_GET_SERVICE */
-struct ip_vs_service_entry {
-	/* which service: user fills in these */
-	u_int16_t		protocol;
-	__be32			addr;		/* virtual address */
-	__be16			port;
-	u_int32_t		fwmark;		/* firwall mark of service */
-
-	/* service options */
-	char			sched_name[IP_VS_SCHEDNAME_MAXLEN];
-	unsigned		flags;          /* virtual service flags */
-	unsigned		timeout;	/* persistent timeout */
-	__be32			netmask;	/* persistent netmask */
-
-	/* number of real servers */
-	unsigned int		num_dests;
-
-	/* statistics */
-	struct ip_vs_stats_user stats;
-};
-
-
-struct ip_vs_dest_entry {
-	__be32			addr;		/* destination address */
-	__be16			port;
-	unsigned		conn_flags;	/* connection flags */
-	int			weight;		/* destination weight */
-
-	u_int32_t		u_threshold;	/* upper threshold */
-	u_int32_t		l_threshold;	/* lower threshold */
-
-	u_int32_t		activeconns;	/* active connections */
-	u_int32_t		inactconns;	/* inactive connections */
-	u_int32_t		persistconns;	/* persistent connections */
-
-	/* statistics */
-	struct ip_vs_stats_user stats;
-};
-
-
-/* The argument to IP_VS_SO_GET_DESTS */
-struct ip_vs_get_dests {
-	/* which service: user fills in these */
-	u_int16_t		protocol;
-	__be32			addr;		/* virtual address */
-	__be16			port;
-	u_int32_t		fwmark;		/* firwall mark of service */
-
-	/* number of real servers */
-	unsigned int		num_dests;
-
-	/* the real servers */
-	struct ip_vs_dest_entry	entrytable[0];
-};
-
-
-/* The argument to IP_VS_SO_GET_SERVICES */
-struct ip_vs_get_services {
-	/* number of virtual services */
-	unsigned int		num_services;
-
-	/* service table */
-	struct ip_vs_service_entry entrytable[0];
-};
-
-
-/* The argument to IP_VS_SO_GET_TIMEOUT */
-struct ip_vs_timeout_user {
-	int			tcp_timeout;
-	int			tcp_fin_timeout;
-	int			udp_timeout;
-};
-
-
-/* The argument to IP_VS_SO_GET_DAEMON */
-struct ip_vs_daemon_user {
-	/* sync daemon state (master/backup) */
-	int			state;
-
-	/* multicast interface name */
-	char			mcast_ifn[IP_VS_IFNAME_MAXLEN];
-
-	/* SyncID we belong to */
-	int			syncid;
-};
+#ifndef _NET_IP_VS_H
+#define _NET_IP_VS_H
 
+#include <linux/ip_vs.h>                /* definitions shared with userland */
 
+/* old ipvsadm versions still include this file directly */
 #ifdef __KERNEL__
 
+#include <asm/types.h>                  /* for __uXX types */
+
+#include <linux/sysctl.h>               /* for ctl_path */
 #include <linux/list.h>                 /* for struct list_head */
 #include <linux/spinlock.h>             /* for struct rwlock_t */
 #include <asm/atomic.h>                 /* for struct atomic_t */
@@ -377,8 +140,24 @@ struct ip_vs_seq {
 
 
 /*
- *	IPVS statistics object
+ *	IPVS statistics objects
  */
+struct ip_vs_estimator {
+	struct list_head	list;
+
+	u64			last_inbytes;
+	u64			last_outbytes;
+	u32			last_conns;
+	u32			last_inpkts;
+	u32			last_outpkts;
+
+	u32			cps;
+	u32			inpps;
+	u32			outpps;
+	u32			inbps;
+	u32			outbps;
+};
+
 struct ip_vs_stats
 {
 	__u32                   conns;          /* connections scheduled */
@@ -393,7 +172,15 @@ struct ip_vs_stats
 	__u32			inbps;		/* current in byte rate */
 	__u32			outbps;		/* current out byte rate */
 
+	/*
+	 * Don't add anything before the lock, because we use memcpy() to copy
+	 * the members before the lock to struct ip_vs_stats_user in
+	 * ip_vs_ctl.c.
+	 */
+
 	spinlock_t              lock;           /* spin lock */
+
+	struct ip_vs_estimator	est;		/* estimator */
 };
 
 struct dst_entry;
@@ -677,7 +464,7 @@ struct ip_vs_app
  */
 extern const char *ip_vs_proto_name(unsigned proto);
 extern void ip_vs_init_hash_table(struct list_head *table, int rows);
-#define IP_VS_INIT_HASH_TABLE(t) ip_vs_init_hash_table(t, sizeof(t)/sizeof(t[0]))
+#define IP_VS_INIT_HASH_TABLE(t) ip_vs_init_hash_table((t), ARRAY_SIZE((t)))
 
 #define IP_VS_APP_TYPE_FTP	1
 
@@ -857,7 +644,7 @@ extern int sysctl_ip_vs_expire_quiescent_template;
 extern int sysctl_ip_vs_sync_threshold[2];
 extern int sysctl_ip_vs_nat_icmp_send;
 extern struct ip_vs_stats ip_vs_stats;
-extern struct ctl_path net_vs_ctl_path[];
+extern const struct ctl_path net_vs_ctl_path[];
 
 extern struct ip_vs_service *
 ip_vs_service_get(__u32 fwmark, __u16 protocol, __be32 vaddr, __be16 vport);
@@ -896,7 +683,7 @@ extern void ip_vs_sync_conn(struct ip_vs_conn *cp);
 /*
  *      IPVS rate estimator prototypes (from ip_vs_est.c)
  */
-extern int ip_vs_new_estimator(struct ip_vs_stats *stats);
+extern void ip_vs_new_estimator(struct ip_vs_stats *stats);
 extern void ip_vs_kill_estimator(struct ip_vs_stats *stats);
 extern void ip_vs_zero_estimator(struct ip_vs_stats *stats);
 
@@ -981,4 +768,4 @@ static inline __wsum ip_vs_check_diff2(__be16 old, __be16 new, __wsum oldsum)
 
 #endif /* __KERNEL__ */
 
-#endif	/* _IP_VS_H */
+#endif	/* _NET_IP_VS_H */
diff --git a/include/net/ipcomp.h b/include/net/ipcomp.h
index 330b74e813a9..2a1092abaa07 100644
--- a/include/net/ipcomp.h
+++ b/include/net/ipcomp.h
@@ -14,6 +14,12 @@ struct ipcomp_data {
 
 struct ip_comp_hdr;
 struct sk_buff;
+struct xfrm_state;
+
+int ipcomp_input(struct xfrm_state *x, struct sk_buff *skb);
+int ipcomp_output(struct xfrm_state *x, struct sk_buff *skb);
+void ipcomp_destroy(struct xfrm_state *x);
+int ipcomp_init_state(struct xfrm_state *x);
 
 static inline struct ip_comp_hdr *ip_comp_hdr(const struct sk_buff *skb)
 {
diff --git a/include/net/ipv6.h b/include/net/ipv6.h
index 2d5c18514a2d..113028fb8f66 100644
--- a/include/net/ipv6.h
+++ b/include/net/ipv6.h
@@ -608,6 +608,8 @@ extern struct ctl_table *ipv6_icmp_sysctl_init(struct net *net);
 extern struct ctl_table *ipv6_route_sysctl_init(struct net *net);
 extern int ipv6_sysctl_register(void);
 extern void ipv6_sysctl_unregister(void);
+extern int ipv6_static_sysctl_register(void);
+extern void ipv6_static_sysctl_unregister(void);
 #endif
 
 #endif /* __KERNEL__ */
diff --git a/include/net/mac80211.h b/include/net/mac80211.h
index 4dd3d93e1960..ff137fd7714f 100644
--- a/include/net/mac80211.h
+++ b/include/net/mac80211.h
@@ -177,9 +177,10 @@ enum ieee80211_bss_change {
  * @aid: association ID number, valid only when @assoc is true
  * @use_cts_prot: use CTS protection
  * @use_short_preamble: use 802.11b short preamble
+ * @dtim_period: num of beacons before the next DTIM, for PSM
  * @timestamp: beacon timestamp
  * @beacon_int: beacon interval
- * @assoc_capability: capabbilities taken from assoc resp
+ * @assoc_capability: capabilities taken from assoc resp
  * @assoc_ht: association in HT mode
  * @ht_conf: ht capabilities
  * @ht_bss_conf: ht extended capabilities
@@ -191,6 +192,7 @@ struct ieee80211_bss_conf {
 	/* erp related data */
 	bool use_cts_prot;
 	bool use_short_preamble;
+	u8 dtim_period;
 	u16 beacon_int;
 	u16 assoc_capability;
 	u64 timestamp;
@@ -206,8 +208,6 @@ struct ieee80211_bss_conf {
  * These flags are used with the @flags member of &ieee80211_tx_info.
  *
  * @IEEE80211_TX_CTL_REQ_TX_STATUS: request TX status callback for this frame.
- * @IEEE80211_TX_CTL_DO_NOT_ENCRYPT: send this frame without encryption;
- *	e.g., for EAPOL frame
  * @IEEE80211_TX_CTL_USE_RTS_CTS: use RTS-CTS before sending frame
  * @IEEE80211_TX_CTL_USE_CTS_PROTECT: use CTS protection for the frame (e.g.,
  *	for combined 802.11g / 802.11b networks)
@@ -220,7 +220,6 @@ struct ieee80211_bss_conf {
  * @IEEE80211_TX_CTL_SHORT_PREAMBLE: TBD
  * @IEEE80211_TX_CTL_LONG_RETRY_LIMIT: this frame should be send using the
  *	through set_retry_limit configured long retry value
- * @IEEE80211_TX_CTL_EAPOL_FRAME: internal to mac80211
  * @IEEE80211_TX_CTL_SEND_AFTER_DTIM: send this frame after DTIM beacon
  * @IEEE80211_TX_CTL_AMPDU: this frame should be sent as part of an A-MPDU
  * @IEEE80211_TX_CTL_OFDM_HT: this frame can be sent in HT OFDM rates. number
@@ -253,7 +252,6 @@ struct ieee80211_bss_conf {
  */
 enum mac80211_tx_control_flags {
 	IEEE80211_TX_CTL_REQ_TX_STATUS		= BIT(0),
-	IEEE80211_TX_CTL_DO_NOT_ENCRYPT		= BIT(1),
 	IEEE80211_TX_CTL_USE_RTS_CTS		= BIT(2),
 	IEEE80211_TX_CTL_USE_CTS_PROTECT	= BIT(3),
 	IEEE80211_TX_CTL_NO_ACK			= BIT(4),
@@ -263,7 +261,6 @@ enum mac80211_tx_control_flags {
 	IEEE80211_TX_CTL_FIRST_FRAGMENT		= BIT(8),
 	IEEE80211_TX_CTL_SHORT_PREAMBLE		= BIT(9),
 	IEEE80211_TX_CTL_LONG_RETRY_LIMIT	= BIT(10),
-	IEEE80211_TX_CTL_EAPOL_FRAME		= BIT(11),
 	IEEE80211_TX_CTL_SEND_AFTER_DTIM	= BIT(12),
 	IEEE80211_TX_CTL_AMPDU			= BIT(13),
 	IEEE80211_TX_CTL_OFDM_HT		= BIT(14),
@@ -323,7 +320,6 @@ struct ieee80211_tx_info {
 			struct ieee80211_vif *vif;
 			struct ieee80211_key_conf *hw_key;
 			unsigned long jiffies;
-			int ifindex;
 			u16 aid;
 			s8 rts_cts_rate_idx, alt_retry_rate_idx;
 			u8 retry_limit;
@@ -436,6 +432,7 @@ enum ieee80211_conf_flags {
  * @radio_enabled: when zero, driver is required to switch off the radio.
  *	TODO make a flag
  * @beacon_int: beacon interval (TODO make interface config)
+ * @listen_interval: listen interval in units of beacon interval
  * @flags: configuration flags defined above
  * @power_level: requested transmit power (in dBm)
  * @max_antenna_gain: maximum antenna gain (in dBi)
@@ -450,6 +447,7 @@ struct ieee80211_conf {
 	int radio_enabled;
 
 	int beacon_int;
+	u16 listen_interval;
 	u32 flags;
 	int power_level;
 	int max_antenna_gain;
@@ -710,10 +708,7 @@ enum ieee80211_tkip_key_type {
  *	rely on the host system for such buffering. This option is used
  *	to configure the IEEE 802.11 upper layer to buffer broadcast and
  *	multicast frames when there are power saving stations so that
- *	the driver can fetch them with ieee80211_get_buffered_bc(). Note
- *	that not setting this flag works properly only when the
- *	%IEEE80211_HW_HOST_GEN_BEACON_TEMPLATE is also not set because
- *	otherwise the stack will not know when the DTIM beacon was sent.
+ *	the driver can fetch them with ieee80211_get_buffered_bc().
  *
  * @IEEE80211_HW_2GHZ_SHORT_SLOT_INCAPABLE:
  *	Hardware is not capable of short slot operation on the 2.4 GHz band.
@@ -746,7 +741,6 @@ enum ieee80211_tkip_key_type {
  * 	Measurement, Channel Switch, Quieting, TPC
  */
 enum ieee80211_hw_flags {
-	IEEE80211_HW_HOST_GEN_BEACON_TEMPLATE		= 1<<0,
 	IEEE80211_HW_RX_INCLUDES_FCS			= 1<<1,
 	IEEE80211_HW_HOST_BROADCAST_PS_BUFFERING	= 1<<2,
 	IEEE80211_HW_2GHZ_SHORT_SLOT_INCAPABLE		= 1<<3,
@@ -792,6 +786,9 @@ enum ieee80211_hw_flags {
  * @max_signal: Maximum value for signal (rssi) in RX information, used
  *     only when @IEEE80211_HW_SIGNAL_UNSPEC or @IEEE80211_HW_SIGNAL_DB
  *
+ * @max_listen_interval: max listen interval in units of beacon interval
+ *     that HW supports
+ *
  * @queues: number of available hardware transmit queues for
  *	data packets. WMM/QoS requires at least four, these
  *	queues need to have configurable access parameters.
@@ -819,7 +816,9 @@ struct ieee80211_hw {
 	unsigned int extra_tx_headroom;
 	int channel_change_time;
 	int vif_data_size;
-	u16 queues, ampdu_queues;
+	u16 queues;
+	u16 ampdu_queues;
+	u16 max_listen_interval;
 	s8 max_signal;
 };
 
@@ -1097,10 +1096,8 @@ enum ieee80211_ampdu_mlme_action {
  *	See the section "Frame filtering" for more information.
  *	This callback must be implemented and atomic.
  *
- * @set_tim: Set TIM bit. If the hardware/firmware takes care of beacon
- *	generation (that is, %IEEE80211_HW_HOST_GEN_BEACON_TEMPLATE is set)
- *	mac80211 calls this function when a TIM bit must be set or cleared
- *	for a given AID. Must be atomic.
+ * @set_tim: Set TIM bit. mac80211 calls this function when a TIM bit
+ * 	must be set or cleared for a given AID. Must be atomic.
  *
  * @set_key: See the section "Hardware crypto acceleration"
  *	This callback can sleep, and is only called between add_interface
diff --git a/include/net/net_namespace.h b/include/net/net_namespace.h
index 3855620b78a9..a8eb43cf0c7e 100644
--- a/include/net/net_namespace.h
+++ b/include/net/net_namespace.h
@@ -38,7 +38,9 @@ struct net {
 	struct proc_dir_entry 	*proc_net;
 	struct proc_dir_entry 	*proc_net_stat;
 
-	struct list_head	sysctl_table_headers;
+#ifdef CONFIG_SYSCTL
+	struct ctl_table_set	sysctls;
+#endif
 
 	struct net_device       *loopback_dev;          /* The loopback */
 
diff --git a/include/net/pkt_sched.h b/include/net/pkt_sched.h
index 6affcfaa123e..b786a5b09253 100644
--- a/include/net/pkt_sched.h
+++ b/include/net/pkt_sched.h
@@ -78,6 +78,7 @@ extern struct Qdisc *fifo_create_dflt(struct Qdisc *sch, struct Qdisc_ops *ops,
 
 extern int register_qdisc(struct Qdisc_ops *qops);
 extern int unregister_qdisc(struct Qdisc_ops *qops);
+extern void qdisc_list_del(struct Qdisc *q);
 extern struct Qdisc *qdisc_lookup(struct net_device *dev, u32 handle);
 extern struct Qdisc *qdisc_lookup_class(struct net_device *dev, u32 handle);
 extern struct qdisc_rate_table *qdisc_get_rtab(struct tc_ratespec *r,
@@ -89,7 +90,10 @@ extern void __qdisc_run(struct Qdisc *q);
 
 static inline void qdisc_run(struct Qdisc *q)
 {
-	if (!test_and_set_bit(__QDISC_STATE_RUNNING, &q->state))
+	struct netdev_queue *txq = q->dev_queue;
+
+	if (!netif_tx_queue_stopped(txq) &&
+	    !test_and_set_bit(__QDISC_STATE_RUNNING, &q->state))
 		__qdisc_run(q);
 }
 
diff --git a/include/net/request_sock.h b/include/net/request_sock.h
index 0c96e7bed5db..cac811e51f6d 100644
--- a/include/net/request_sock.h
+++ b/include/net/request_sock.h
@@ -18,6 +18,7 @@
 #include <linux/slab.h>
 #include <linux/spinlock.h>
 #include <linux/types.h>
+#include <linux/bug.h>
 
 #include <net/sock.h>
 
@@ -32,7 +33,7 @@ struct request_sock_ops {
 	struct kmem_cache	*slab;
 	int		(*rtx_syn_ack)(struct sock *sk,
 				       struct request_sock *req);
-	void		(*send_ack)(struct sk_buff *skb,
+	void		(*send_ack)(struct sock *sk, struct sk_buff *skb,
 				    struct request_sock *req);
 	void		(*send_reset)(struct sock *sk,
 				      struct sk_buff *skb);
@@ -170,7 +171,7 @@ static inline struct request_sock *reqsk_queue_remove(struct request_sock_queue
 {
 	struct request_sock *req = queue->rskq_accept_head;
 
-	BUG_TRAP(req != NULL);
+	WARN_ON(req == NULL);
 
 	queue->rskq_accept_head = req->dl_next;
 	if (queue->rskq_accept_head == NULL)
@@ -185,7 +186,7 @@ static inline struct sock *reqsk_queue_get_child(struct request_sock_queue *queu
 	struct request_sock *req = reqsk_queue_remove(queue);
 	struct sock *child = req->sk;
 
-	BUG_TRAP(child != NULL);
+	WARN_ON(child == NULL);
 
 	sk_acceptq_removed(parent);
 	__reqsk_free(req);
diff --git a/include/net/route.h b/include/net/route.h
index 3140cc500854..4f0d8c14736c 100644
--- a/include/net/route.h
+++ b/include/net/route.h
@@ -204,6 +204,4 @@ static inline struct inet_peer *rt_get_peer(struct rtable *rt)
 	return rt->peer;
 }
 
-extern ctl_table ipv4_route_table[];
-
 #endif	/* _ROUTE_H */
diff --git a/include/net/sch_generic.h b/include/net/sch_generic.h
index b5f40d7ef724..e5569625d2a5 100644
--- a/include/net/sch_generic.h
+++ b/include/net/sch_generic.h
@@ -27,6 +27,7 @@ enum qdisc_state_t
 {
 	__QDISC_STATE_RUNNING,
 	__QDISC_STATE_SCHED,
+	__QDISC_STATE_DEACTIVATED,
 };
 
 struct qdisc_size_table {
@@ -60,7 +61,6 @@ struct Qdisc
 	struct gnet_stats_basic	bstats;
 	struct gnet_stats_queue	qstats;
 	struct gnet_stats_rate_est	rate_est;
-	struct rcu_head 	q_rcu;
 	int			(*reshape_fail)(struct sk_buff *skb,
 					struct Qdisc *q);
 
@@ -193,10 +193,35 @@ static inline struct Qdisc *qdisc_root(struct Qdisc *qdisc)
 	return qdisc->dev_queue->qdisc;
 }
 
+static inline struct Qdisc *qdisc_root_sleeping(struct Qdisc *qdisc)
+{
+	return qdisc->dev_queue->qdisc_sleeping;
+}
+
+/* The qdisc root lock is a mechanism by which to top level
+ * of a qdisc tree can be locked from any qdisc node in the
+ * forest.  This allows changing the configuration of some
+ * aspect of the qdisc tree while blocking out asynchronous
+ * qdisc access in the packet processing paths.
+ *
+ * It is only legal to do this when the root will not change
+ * on us.  Otherwise we'll potentially lock the wrong qdisc
+ * root.  This is enforced by holding the RTNL semaphore, which
+ * all users of this lock accessor must do.
+ */
 static inline spinlock_t *qdisc_root_lock(struct Qdisc *qdisc)
 {
 	struct Qdisc *root = qdisc_root(qdisc);
 
+	ASSERT_RTNL();
+	return qdisc_lock(root);
+}
+
+static inline spinlock_t *qdisc_root_sleeping_lock(struct Qdisc *qdisc)
+{
+	struct Qdisc *root = qdisc_root_sleeping(qdisc);
+
+	ASSERT_RTNL();
 	return qdisc_lock(root);
 }
 
@@ -207,12 +232,12 @@ static inline struct net_device *qdisc_dev(struct Qdisc *qdisc)
 
 static inline void sch_tree_lock(struct Qdisc *q)
 {
-	spin_lock_bh(qdisc_root_lock(q));
+	spin_lock_bh(qdisc_root_sleeping_lock(q));
 }
 
 static inline void sch_tree_unlock(struct Qdisc *q)
 {
-	spin_unlock_bh(qdisc_root_lock(q));
+	spin_unlock_bh(qdisc_root_sleeping_lock(q));
 }
 
 #define tcf_tree_lock(tp)	sch_tree_lock((tp)->q)
@@ -331,6 +356,18 @@ static inline unsigned int qdisc_pkt_len(struct sk_buff *skb)
 	return qdisc_skb_cb(skb)->pkt_len;
 }
 
+/* additional qdisc xmit flags (NET_XMIT_MASK in linux/netdevice.h) */
+enum net_xmit_qdisc_t {
+	__NET_XMIT_STOLEN = 0x00010000,
+	__NET_XMIT_BYPASS = 0x00020000,
+};
+
+#ifdef CONFIG_NET_CLS_ACT
+#define net_xmit_drop_count(e)	((e) & __NET_XMIT_STOLEN ? 0 : 1)
+#else
+#define net_xmit_drop_count(e)	(1)
+#endif
+
 static inline int qdisc_enqueue(struct sk_buff *skb, struct Qdisc *sch)
 {
 #ifdef CONFIG_NET_SCHED
@@ -343,7 +380,7 @@ static inline int qdisc_enqueue(struct sk_buff *skb, struct Qdisc *sch)
 static inline int qdisc_enqueue_root(struct sk_buff *skb, struct Qdisc *sch)
 {
 	qdisc_skb_cb(skb)->pkt_len = skb->len;
-	return qdisc_enqueue(skb, sch);
+	return qdisc_enqueue(skb, sch) & NET_XMIT_MASK;
 }
 
 static inline int __qdisc_enqueue_tail(struct sk_buff *skb, struct Qdisc *sch,
diff --git a/include/net/sctp/structs.h b/include/net/sctp/structs.h
index 535a18f57a13..ab1c472ea753 100644
--- a/include/net/sctp/structs.h
+++ b/include/net/sctp/structs.h
@@ -524,8 +524,7 @@ static inline void sctp_ssn_skip(struct sctp_stream *stream, __u16 id,
  */
 struct sctp_af {
 	int		(*sctp_xmit)	(struct sk_buff *skb,
-					 struct sctp_transport *,
-					 int ipfragok);
+					 struct sctp_transport *);
 	int		(*setsockopt)	(struct sock *sk,
 					 int level,
 					 int optname,
diff --git a/include/net/syncppp.h b/include/net/syncppp.h
index e43f4070d892..9e306f7f579a 100644
--- a/include/net/syncppp.h
+++ b/include/net/syncppp.h
@@ -43,8 +43,6 @@ struct sppp
 	u32		pp_rseq;	/* remote sequence number */
 	struct slcp	lcp;		/* LCP params */
 	struct sipcp	ipcp;		/* IPCP params */
-	u32		ibytes,obytes;	/* Bytes in/out */
-	u32		ipkts,opkts;	/* Packets in/out */
 	struct timer_list	pp_timer;
 	struct net_device	*pp_if;
 	char		pp_link_state;	/* Link status */
diff --git a/include/rdma/ib_verbs.h b/include/rdma/ib_verbs.h
index 90b529f7a154..936e333e7ce5 100644
--- a/include/rdma/ib_verbs.h
+++ b/include/rdma/ib_verbs.h
@@ -1590,7 +1590,7 @@ static inline int ib_dma_mapping_error(struct ib_device *dev, u64 dma_addr)
 {
 	if (dev->dma_ops)
 		return dev->dma_ops->mapping_error(dev, dma_addr);
-	return dma_mapping_error(dma_addr);
+	return dma_mapping_error(dev->dma_device, dma_addr);
 }
 
 /**
diff --git a/include/rdma/rdma_cm.h b/include/rdma/rdma_cm.h
index df7faf09d66f..c6b2962315b3 100644
--- a/include/rdma/rdma_cm.h
+++ b/include/rdma/rdma_cm.h
@@ -71,12 +71,8 @@ enum rdma_port_space {
 };
 
 struct rdma_addr {
-	struct sockaddr src_addr;
-	u8		src_pad[sizeof(struct sockaddr_in6) -
-				sizeof(struct sockaddr)];
-	struct sockaddr dst_addr;
-	u8		dst_pad[sizeof(struct sockaddr_in6) -
-				sizeof(struct sockaddr)];
+	struct sockaddr_storage src_addr;
+	struct sockaddr_storage dst_addr;
 	struct rdma_dev_addr dev_addr;
 };
 
diff --git a/include/scsi/scsi.h b/include/scsi/scsi.h
index 00137a7769ee..5c40cc537d4c 100644
--- a/include/scsi/scsi.h
+++ b/include/scsi/scsi.h
@@ -106,6 +106,7 @@
 #define VARIABLE_LENGTH_CMD   0x7f
 #define REPORT_LUNS           0xa0
 #define MAINTENANCE_IN        0xa3
+#define MAINTENANCE_OUT       0xa4
 #define MOVE_MEDIUM           0xa5
 #define EXCHANGE_MEDIUM       0xa6
 #define READ_12               0xa8
@@ -125,6 +126,8 @@
 #define	SAI_READ_CAPACITY_16  0x10
 /* values for maintenance in */
 #define MI_REPORT_TARGET_PGS  0x0a
+/* values for maintenance out */
+#define MO_SET_TARGET_PGS     0x0a
 
 /* Values for T10/04-262r7 */
 #define	ATA_16		      0x85	/* 16-byte pass-thru */
diff --git a/include/scsi/scsi_cmnd.h b/include/scsi/scsi_cmnd.h
index 66c944849d6b..f9f6e793575c 100644
--- a/include/scsi/scsi_cmnd.h
+++ b/include/scsi/scsi_cmnd.h
@@ -77,6 +77,9 @@ struct scsi_cmnd {
 	int allowed;
 	int timeout_per_command;
 
+	unsigned char prot_op;
+	unsigned char prot_type;
+
 	unsigned short cmd_len;
 	enum dma_data_direction sc_data_direction;
 
@@ -87,6 +90,8 @@ struct scsi_cmnd {
 
 	/* These elements define the operation we ultimately want to perform */
 	struct scsi_data_buffer sdb;
+	struct scsi_data_buffer *prot_sdb;
+
 	unsigned underflow;	/* Return error if less than
 				   this amount is transferred */
 
@@ -208,4 +213,85 @@ static inline int scsi_sg_copy_to_buffer(struct scsi_cmnd *cmd,
 				 buf, buflen);
 }
 
+/*
+ * The operations below are hints that tell the controller driver how
+ * to handle I/Os with DIF or similar types of protection information.
+ */
+enum scsi_prot_operations {
+	/* Normal I/O */
+	SCSI_PROT_NORMAL = 0,
+
+	/* OS-HBA: Protected, HBA-Target: Unprotected */
+	SCSI_PROT_READ_INSERT,
+	SCSI_PROT_WRITE_STRIP,
+
+	/* OS-HBA: Unprotected, HBA-Target: Protected */
+	SCSI_PROT_READ_STRIP,
+	SCSI_PROT_WRITE_INSERT,
+
+	/* OS-HBA: Protected, HBA-Target: Protected */
+	SCSI_PROT_READ_PASS,
+	SCSI_PROT_WRITE_PASS,
+
+	/* OS-HBA: Protected, HBA-Target: Protected, checksum conversion */
+	SCSI_PROT_READ_CONVERT,
+	SCSI_PROT_WRITE_CONVERT,
+};
+
+static inline void scsi_set_prot_op(struct scsi_cmnd *scmd, unsigned char op)
+{
+	scmd->prot_op = op;
+}
+
+static inline unsigned char scsi_get_prot_op(struct scsi_cmnd *scmd)
+{
+	return scmd->prot_op;
+}
+
+/*
+ * The controller usually does not know anything about the target it
+ * is communicating with.  However, when DIX is enabled the controller
+ * must be know target type so it can verify the protection
+ * information passed along with the I/O.
+ */
+enum scsi_prot_target_type {
+	SCSI_PROT_DIF_TYPE0 = 0,
+	SCSI_PROT_DIF_TYPE1,
+	SCSI_PROT_DIF_TYPE2,
+	SCSI_PROT_DIF_TYPE3,
+};
+
+static inline void scsi_set_prot_type(struct scsi_cmnd *scmd, unsigned char type)
+{
+	scmd->prot_type = type;
+}
+
+static inline unsigned char scsi_get_prot_type(struct scsi_cmnd *scmd)
+{
+	return scmd->prot_type;
+}
+
+static inline sector_t scsi_get_lba(struct scsi_cmnd *scmd)
+{
+	return scmd->request->sector;
+}
+
+static inline unsigned scsi_prot_sg_count(struct scsi_cmnd *cmd)
+{
+	return cmd->prot_sdb ? cmd->prot_sdb->table.nents : 0;
+}
+
+static inline struct scatterlist *scsi_prot_sglist(struct scsi_cmnd *cmd)
+{
+	return cmd->prot_sdb ? cmd->prot_sdb->table.sgl : NULL;
+}
+
+static inline struct scsi_data_buffer *scsi_prot(struct scsi_cmnd *cmd)
+{
+	return cmd->prot_sdb;
+}
+
+#define scsi_for_each_prot_sg(cmd, sg, nseg, __i)		\
+	for_each_sg(scsi_prot_sglist(cmd), sg, nseg, __i)
+
 #endif /* _SCSI_SCSI_CMND_H */
diff --git a/include/scsi/scsi_device.h b/include/scsi/scsi_device.h
index 6467f78b191f..80b2e93c2936 100644
--- a/include/scsi/scsi_device.h
+++ b/include/scsi/scsi_device.h
@@ -6,6 +6,7 @@
 #include <linux/spinlock.h>
 #include <linux/workqueue.h>
 #include <linux/blkdev.h>
+#include <scsi/scsi.h>
 #include <asm/atomic.h>
 
 struct request_queue;
@@ -140,7 +141,8 @@ struct scsi_device {
 	unsigned fix_capacity:1;	/* READ_CAPACITY is too high by 1 */
 	unsigned guess_capacity:1;	/* READ_CAPACITY might be too high by 1 */
 	unsigned retry_hwerror:1;	/* Retry HARDWARE_ERROR */
-	unsigned last_sector_bug:1;	/* Always read last sector in a 1 sector read */
+	unsigned last_sector_bug:1;	/* do not use multisector accesses on
+					   SD_LAST_BUGGY_SECTORS */
 
 	DECLARE_BITMAP(supported_events, SDEV_EVT_MAXBITS); /* supported events */
 	struct list_head event_list;	/* asserted events */
@@ -167,15 +169,22 @@ struct scsi_device {
 	unsigned long		sdev_data[0];
 } __attribute__((aligned(sizeof(unsigned long))));
 
+struct scsi_dh_devlist {
+	char *vendor;
+	char *model;
+};
+
 struct scsi_device_handler {
 	/* Used by the infrastructure */
 	struct list_head list; /* list of scsi_device_handlers */
-	struct notifier_block nb;
 
 	/* Filled by the hardware handler */
 	struct module *module;
 	const char *name;
+	const struct scsi_dh_devlist *devlist;
 	int (*check_sense)(struct scsi_device *, struct scsi_sense_hdr *);
+	int (*attach)(struct scsi_device *);
+	void (*detach)(struct scsi_device *);
 	int (*activate)(struct scsi_device *);
 	int (*prep_fn)(struct scsi_device *, struct request *);
 };
@@ -416,6 +425,11 @@ static inline int scsi_device_enclosure(struct scsi_device *sdev)
 	return sdev->inquiry[6] & (1<<6);
 }
 
+static inline int scsi_device_protection(struct scsi_device *sdev)
+{
+	return sdev->scsi_level > SCSI_2 && sdev->inquiry[5] & (1<<0);
+}
+
 #define MODULE_ALIAS_SCSI_DEVICE(type) \
 	MODULE_ALIAS("scsi:t-" __stringify(type) "*")
 #define SCSI_DEVICE_MODALIAS_FMT "scsi:t-0x%02x"
diff --git a/include/scsi/scsi_dh.h b/include/scsi/scsi_dh.h
index 3ad2303d1a16..33efce20c26c 100644
--- a/include/scsi/scsi_dh.h
+++ b/include/scsi/scsi_dh.h
@@ -32,6 +32,7 @@ enum {
 	 */
 	SCSI_DH_DEV_FAILED,	/* generic device error */
 	SCSI_DH_DEV_TEMP_BUSY,
+	SCSI_DH_DEV_UNSUPP,	/* device handler not supported */
 	SCSI_DH_DEVICE_MAX,	/* max device blkerr definition */
 
 	/*
@@ -57,6 +58,8 @@ enum {
 #if defined(CONFIG_SCSI_DH) || defined(CONFIG_SCSI_DH_MODULE)
 extern int scsi_dh_activate(struct request_queue *);
 extern int scsi_dh_handler_exist(const char *);
+extern int scsi_dh_attach(struct request_queue *, const char *);
+extern void scsi_dh_detach(struct request_queue *);
 #else
 static inline int scsi_dh_activate(struct request_queue *req)
 {
@@ -66,4 +69,12 @@ static inline int scsi_dh_handler_exist(const char *name)
 {
 	return 0;
 }
+static inline int scsi_dh_attach(struct request_queue *req, const char *name)
+{
+	return SCSI_DH_NOSYS;
+}
+static inline void scsi_dh_detach(struct request_queue *q)
+{
+	return;
+}
 #endif
diff --git a/include/scsi/scsi_eh.h b/include/scsi/scsi_eh.h
index 2a9add21267d..06a8790893ef 100644
--- a/include/scsi/scsi_eh.h
+++ b/include/scsi/scsi_eh.h
@@ -74,7 +74,9 @@ struct scsi_eh_save {
 	/* saved state */
 	int result;
 	enum dma_data_direction data_direction;
+	unsigned underflow;
 	unsigned char cmd_len;
+	unsigned char prot_op;
 	unsigned char *cmnd;
 	struct scsi_data_buffer sdb;
 	struct request *next_rq;
diff --git a/include/scsi/scsi_host.h b/include/scsi/scsi_host.h
index a594bac4a77d..44a55d1bf530 100644
--- a/include/scsi/scsi_host.h
+++ b/include/scsi/scsi_host.h
@@ -547,7 +547,7 @@ struct Scsi_Host {
 	unsigned int host_failed;	   /* commands that failed. */
 	unsigned int host_eh_scheduled;    /* EH scheduled without command */
     
-	unsigned short host_no;  /* Used for IOCTL_GET_IDLUN, /proc/scsi et al. */
+	unsigned int host_no;  /* Used for IOCTL_GET_IDLUN, /proc/scsi et al. */
 	int resetting; /* if set, it means that last_reset is a valid value */
 	unsigned long last_reset;
 
@@ -636,6 +636,10 @@ struct Scsi_Host {
 	 */
 	unsigned int max_host_blocked;
 
+	/* Protection Information */
+	unsigned int prot_capabilities;
+	unsigned char prot_guard_type;
+
 	/*
 	 * q used for scsi_tgt msgs, async events or any other requests that
 	 * need to be processed in userspace
@@ -756,6 +760,86 @@ extern struct request_queue *__scsi_alloc_queue(struct Scsi_Host *shost,
 extern void scsi_free_host_dev(struct scsi_device *);
 extern struct scsi_device *scsi_get_host_dev(struct Scsi_Host *);
 
+/*
+ * DIF defines the exchange of protection information between
+ * initiator and SBC block device.
+ *
+ * DIX defines the exchange of protection information between OS and
+ * initiator.
+ */
+enum scsi_host_prot_capabilities {
+	SHOST_DIF_TYPE1_PROTECTION = 1 << 0, /* T10 DIF Type 1 */
+	SHOST_DIF_TYPE2_PROTECTION = 1 << 1, /* T10 DIF Type 2 */
+	SHOST_DIF_TYPE3_PROTECTION = 1 << 2, /* T10 DIF Type 3 */
+
+	SHOST_DIX_TYPE0_PROTECTION = 1 << 3, /* DIX between OS and HBA only */
+	SHOST_DIX_TYPE1_PROTECTION = 1 << 4, /* DIX with DIF Type 1 */
+	SHOST_DIX_TYPE2_PROTECTION = 1 << 5, /* DIX with DIF Type 2 */
+	SHOST_DIX_TYPE3_PROTECTION = 1 << 6, /* DIX with DIF Type 3 */
+};
+
+/*
+ * SCSI hosts which support the Data Integrity Extensions must
+ * indicate their capabilities by setting the prot_capabilities using
+ * this call.
+ */
+static inline void scsi_host_set_prot(struct Scsi_Host *shost, unsigned int mask)
+{
+	shost->prot_capabilities = mask;
+}
+
+static inline unsigned int scsi_host_get_prot(struct Scsi_Host *shost)
+{
+	return shost->prot_capabilities;
+}
+
+static inline unsigned int scsi_host_dif_capable(struct Scsi_Host *shost, unsigned int target_type)
+{
+	switch (target_type) {
+	case 1: return shost->prot_capabilities & SHOST_DIF_TYPE1_PROTECTION;
+	case 2: return shost->prot_capabilities & SHOST_DIF_TYPE2_PROTECTION;
+	case 3: return shost->prot_capabilities & SHOST_DIF_TYPE3_PROTECTION;
+	}
+
+	return 0;
+}
+
+static inline unsigned int scsi_host_dix_capable(struct Scsi_Host *shost, unsigned int target_type)
+{
+	switch (target_type) {
+	case 0: return shost->prot_capabilities & SHOST_DIX_TYPE0_PROTECTION;
+	case 1: return shost->prot_capabilities & SHOST_DIX_TYPE1_PROTECTION;
+	case 2: return shost->prot_capabilities & SHOST_DIX_TYPE2_PROTECTION;
+	case 3: return shost->prot_capabilities & SHOST_DIX_TYPE3_PROTECTION;
+	}
+
+	return 0;
+}
+
+/*
+ * All DIX-capable initiators must support the T10-mandated CRC
+ * checksum.  Controllers can optionally implement the IP checksum
+ * scheme which has much lower impact on system performance.  Note
+ * that the main rationale for the checksum is to match integrity
+ * metadata with data.  Detecting bit errors are a job for ECC memory
+ * and buses.
+ */
+
+enum scsi_host_guard_type {
+	SHOST_DIX_GUARD_CRC = 1 << 0,
+	SHOST_DIX_GUARD_IP  = 1 << 1,
+};
+
+static inline void scsi_host_set_guard(struct Scsi_Host *shost, unsigned char type)
+{
+	shost->prot_guard_type = type;
+}
+
+static inline unsigned char scsi_host_get_guard(struct Scsi_Host *shost)
+{
+	return shost->prot_guard_type;
+}
+
 /* legacy interfaces */
 extern struct Scsi_Host *scsi_register(struct scsi_host_template *, int);
 extern void scsi_unregister(struct Scsi_Host *);
diff --git a/include/sound/soc-dapm.h b/include/sound/soc-dapm.h
index 3030fdc6981d..c1b26fcc0b5c 100644
--- a/include/sound/soc-dapm.h
+++ b/include/sound/soc-dapm.h
@@ -202,6 +202,9 @@ struct snd_soc_dapm_path;
 struct snd_soc_dapm_pin;
 struct snd_soc_dapm_route;
 
+int dapm_reg_event(struct snd_soc_dapm_widget *w,
+		   struct snd_kcontrol *kcontrol, int event);
+
 /* dapm controls */
 int snd_soc_dapm_put_volsw(struct snd_kcontrol *kcontrol,
 	struct snd_ctl_elem_value *ucontrol);
diff --git a/include/video/atmel_lcdc.h b/include/video/atmel_lcdc.h
index 1ccf462b433a..920c4e9cb93d 100644
--- a/include/video/atmel_lcdc.h
+++ b/include/video/atmel_lcdc.h
@@ -22,6 +22,7 @@
 #ifndef __ATMEL_LCDC_H__
 #define __ATMEL_LCDC_H__
 
+#include <linux/workqueue.h>
 
 /* Way LCD wires are connected to the chip:
  * Some Atmel chips use BGR color mode (instead of standard RGB)
@@ -40,6 +41,7 @@ struct atmel_lcdfb_info {
 	struct work_struct	task;
 
 	unsigned int		guard_time;
+	unsigned int 		smem_len;
 	struct platform_device	*pdev;
 	struct clk		*bus_clk;
 	struct clk		*lcdc_clk;
diff --git a/include/video/radeon.h b/include/video/radeon.h
index 83467e18f5e9..099ffa5e5bee 100644
--- a/include/video/radeon.h
+++ b/include/video/radeon.h
@@ -527,8 +527,9 @@
 
 
 /* DSTCACHE_CTLSTAT bit constants */
-#define RB2D_DC_FLUSH				   (3 << 0)
-#define RB2D_DC_FLUSH_ALL			   0xf
+#define RB2D_DC_FLUSH_2D			   (1 << 0)
+#define RB2D_DC_FREE_2D				   (1 << 2)
+#define RB2D_DC_FLUSH_ALL			   (RB2D_DC_FLUSH_2D | RB2D_DC_FREE_2D)
 #define RB2D_DC_BUSY				   (1 << 31)
 
 
@@ -741,6 +742,10 @@
 #define SOFT_RESET_RB           		   (1 <<  6)
 #define SOFT_RESET_HDP          		   (1 <<  7)
 
+/* WAIT_UNTIL bit constants */
+#define WAIT_DMA_GUI_IDLE			   (1 << 9)
+#define WAIT_2D_IDLECLEAN			   (1 << 16)
+
 /* SURFACE_CNTL bit consants */
 #define SURF_TRANSLATION_DIS			   (1 << 8)
 #define NONSURF_AP0_SWP_16BPP			   (1 << 20)
diff --git a/init/Kconfig b/init/Kconfig
index a50bdfed2df7..c11da38837e5 100644
--- a/init/Kconfig
+++ b/init/Kconfig
@@ -171,7 +171,7 @@ config BSD_PROCESS_ACCT_V3
 	  process and it's parent. Note that this file format is incompatible
 	  with previous v0/v1/v2 file formats, so you will need updated tools
 	  for processing it. A preliminary version of these tools is available
-	  at <http://www.physik3.uni-rostock.de/tim/kernel/utils/acct/>.
+	  at <http://www.gnu.org/software/acct/>.
 
 config TASKSTATS
 	bool "Export task/process statistics through netlink (EXPERIMENTAL)"
@@ -486,7 +486,7 @@ config PID_NS
 	default n
 	depends on NAMESPACES && EXPERIMENTAL
 	help
-	  Suport process id namespaces.  This allows having multiple
+	  Support process id namespaces.  This allows having multiple
 	  process with the same pid as long as they are in different
 	  pid namespaces.  This is a building block of containers.
 
@@ -522,7 +522,7 @@ config CC_OPTIMIZE_FOR_SIZE
 	  Enabling this option will pass "-Os" instead of "-O2" to gcc
 	  resulting in a smaller kernel.
 
-	  If unsure, say N.
+	  If unsure, say Y.
 
 config SYSCTL
 	bool
@@ -558,17 +558,6 @@ config SYSCTL_SYSCALL
 
 	  If unsure say Y here.
 
-config SYSCTL_SYSCALL_CHECK
-	bool "Sysctl checks" if EMBEDDED
-	depends on SYSCTL_SYSCALL
-	default y
-	---help---
-	  sys_sysctl uses binary paths that have been found challenging
-	  to properly maintain and use. This enables checks that help
-	  you to keep things correct.
-
-	  If unsure say Y here.
-
 config KALLSYMS
 	 bool "Load all symbols for debugging/ksymoops" if EMBEDDED
 	 default y
@@ -802,6 +791,10 @@ config PROC_PAGE_MONITOR
 
 endmenu		# General setup
 
+config HAVE_GENERIC_DMA_COHERENT
+	bool
+	default n
+
 config SLABINFO
 	bool
 	depends on PROC_FS
@@ -841,9 +834,10 @@ menuconfig MODULES
 
 	  If unsure, say Y.
 
+if MODULES
+
 config MODULE_FORCE_LOAD
 	bool "Forced module loading"
-	depends on MODULES
 	default n
 	help
 	  Allow loading of modules without version information (ie. modprobe
@@ -852,7 +846,6 @@ config MODULE_FORCE_LOAD
 
 config MODULE_UNLOAD
 	bool "Module unloading"
-	depends on MODULES
 	help
 	  Without this option you will not be able to unload any
 	  modules (note that some modules may not be unloadable
@@ -871,7 +864,6 @@ config MODULE_FORCE_UNLOAD
 
 config MODVERSIONS
 	bool "Module versioning support"
-	depends on MODULES
 	help
 	  Usually, you have to use modules compiled with your kernel.
 	  Saying Y here makes it sometimes possible to use modules
@@ -882,7 +874,6 @@ config MODVERSIONS
 
 config MODULE_SRCVERSION_ALL
 	bool "Source checksum for all modules"
-	depends on MODULES
 	help
 	  Modules which contain a MODULE_VERSION get an extra "srcversion"
 	  field inserted into their modinfo section, which contains a
@@ -894,11 +885,12 @@ config MODULE_SRCVERSION_ALL
 
 config KMOD
 	def_bool y
-	depends on MODULES
 	help
 	  This is being removed soon.  These days, CONFIG_MODULES
 	  implies CONFIG_KMOD, so use that instead.
 
+endif # MODULES
+
 config STOP_MACHINE
 	bool
 	default y
diff --git a/init/calibrate.c b/init/calibrate.c
index 7963e3fc51d9..a379c9061199 100644
--- a/init/calibrate.c
+++ b/init/calibrate.c
@@ -170,7 +170,7 @@ void __cpuinit calibrate_delay(void)
 				loops_per_jiffy &= ~loopbit;
 		}
 	}
-	printk(KERN_INFO "%lu.%02lu BogoMIPS (lpj=%lu)\n",
+	printk(KERN_CONT "%lu.%02lu BogoMIPS (lpj=%lu)\n",
 			loops_per_jiffy/(500000/HZ),
 			(loops_per_jiffy/(5000/HZ)) % 100, loops_per_jiffy);
 }
diff --git a/init/do_mounts.c b/init/do_mounts.c
index a1de1bf3d6b9..3715feb8446d 100644
--- a/init/do_mounts.c
+++ b/init/do_mounts.c
@@ -12,6 +12,7 @@
 #include <linux/device.h>
 #include <linux/init.h>
 #include <linux/fs.h>
+#include <linux/initrd.h>
 
 #include <linux/nfs_fs.h>
 #include <linux/nfs_fs_sb.h>
@@ -22,7 +23,7 @@
 int __initdata rd_doload;	/* 1 = load RAM disk, 0 = don't load */
 
 int root_mountflags = MS_RDONLY | MS_SILENT;
-char * __initdata root_device_name;
+static char * __initdata root_device_name;
 static char __initdata saved_root_name[64];
 static int __initdata root_wait;
 
diff --git a/init/do_mounts.h b/init/do_mounts.h
index 735705d137ff..9aa968d54329 100644
--- a/init/do_mounts.h
+++ b/init/do_mounts.h
@@ -11,7 +11,6 @@ void  change_floppy(char *fmt, ...);
 void  mount_block_root(char *name, int flags);
 void  mount_root(void);
 extern int root_mountflags;
-extern char *root_device_name;
 
 static inline int create_dev(char *name, dev_t dev)
 {
diff --git a/init/do_mounts_rd.c b/init/do_mounts_rd.c
index 46dfd64ae8fb..fedef93b586f 100644
--- a/init/do_mounts_rd.c
+++ b/init/do_mounts_rd.c
@@ -10,8 +10,6 @@
 
 #include "do_mounts.h"
 
-#define BUILD_CRAMDISK
-
 int __initdata rd_prompt = 1;/* 1 = prompt for RAM disk, 0 = don't prompt */
 
 static int __init prompt_ramdisk(char *str)
@@ -162,14 +160,8 @@ int __init rd_load_image(char *from)
 		goto done;
 
 	if (nblocks == 0) {
-#ifdef BUILD_CRAMDISK
 		if (crd_load(in_fd, out_fd) == 0)
 			goto successful_load;
-#else
-		printk(KERN_NOTICE
-		       "RAMDISK: Kernel does not support compressed "
-		       "RAM disk images\n");
-#endif
 		goto done;
 	}
 
@@ -267,8 +259,6 @@ int __init rd_load_disk(int n)
 	return rd_load_image("/dev/root");
 }
 
-#ifdef BUILD_CRAMDISK
-
 /*
  * gzip declarations
  */
@@ -313,32 +303,11 @@ static int crd_infd, crd_outfd;
 
 static int  __init fill_inbuf(void);
 static void __init flush_window(void);
-static void __init *malloc(size_t size);
-static void __init free(void *where);
 static void __init error(char *m);
-static void __init gzip_mark(void **);
-static void __init gzip_release(void **);
-
-#include "../lib/inflate.c"
 
-static void __init *malloc(size_t size)
-{
-	return kmalloc(size, GFP_KERNEL);
-}
-
-static void __init free(void *where)
-{
-	kfree(where);
-}
-
-static void __init gzip_mark(void **ptr)
-{
-}
-
-static void __init gzip_release(void **ptr)
-{
-}
+#define NO_INFLATE_MALLOC
 
+#include "../lib/inflate.c"
 
 /* ===========================================================================
  * Fill the input buffer. This is called only when the buffer is empty
@@ -425,5 +394,3 @@ static int __init crd_load(int in_fd, int out_fd)
 	kfree(window);
 	return result;
 }
-
-#endif  /* BUILD_CRAMDISK */
diff --git a/init/initramfs.c b/init/initramfs.c
index 8eeeccb328c9..644fc01ad5f0 100644
--- a/init/initramfs.c
+++ b/init/initramfs.c
@@ -14,16 +14,6 @@ static void __init error(char *x)
 		message = x;
 }
 
-static void __init *malloc(size_t size)
-{
-	return kmalloc(size, GFP_KERNEL);
-}
-
-static void __init free(void *where)
-{
-	kfree(where);
-}
-
 /* link hash */
 
 #define N_ALIGN(len) ((((len) + 1) & ~3) + 2)
@@ -407,18 +397,10 @@ static long bytes_out;
 
 static void __init flush_window(void);
 static void __init error(char *m);
-static void __init gzip_mark(void **);
-static void __init gzip_release(void **);
 
-#include "../lib/inflate.c"
+#define NO_INFLATE_MALLOC
 
-static void __init gzip_mark(void **ptr)
-{
-}
-
-static void __init gzip_release(void **ptr)
-{
-}
+#include "../lib/inflate.c"
 
 /* ===========================================================================
  * Write the output window window[0..outcnt-1] and update crc and bytes_out.
diff --git a/init/main.c b/init/main.c
index 2769dc031c62..f6f7042331dc 100644
--- a/init/main.c
+++ b/init/main.c
@@ -22,7 +22,6 @@
 #include <linux/init.h>
 #include <linux/smp_lock.h>
 #include <linux/initrd.h>
-#include <linux/hdreg.h>
 #include <linux/bootmem.h>
 #include <linux/tty.h>
 #include <linux/gfp.h>
@@ -87,8 +86,6 @@ extern void init_IRQ(void);
 extern void fork_init(unsigned long);
 extern void mca_init(void);
 extern void sbus_init(void);
-extern void pidhash_init(void);
-extern void pidmap_init(void);
 extern void prio_tree_init(void);
 extern void radix_tree_init(void);
 extern void free_initmem(void);
@@ -637,10 +634,11 @@ asmlinkage void __init start_kernel(void)
 
 #ifdef CONFIG_BLK_DEV_INITRD
 	if (initrd_start && !initrd_below_start_ok &&
-	    page_to_pfn(virt_to_page(initrd_start)) < min_low_pfn) {
+	    page_to_pfn(virt_to_page((void *)initrd_start)) < min_low_pfn) {
 		printk(KERN_CRIT "initrd overwritten (0x%08lx < 0x%08lx) - "
 		    "disabling it.\n",
-		    page_to_pfn(virt_to_page(initrd_start)), min_low_pfn);
+		    page_to_pfn(virt_to_page((void *)initrd_start)),
+		    min_low_pfn);
 		initrd_start = 0;
 	}
 #endif
@@ -693,7 +691,7 @@ asmlinkage void __init start_kernel(void)
 	rest_init();
 }
 
-static int __initdata initcall_debug;
+static int initcall_debug;
 
 static int __init initcall_debug_setup(char *str)
 {
@@ -702,7 +700,7 @@ static int __init initcall_debug_setup(char *str)
 }
 __setup("initcall_debug", initcall_debug_setup);
 
-static void __init do_one_initcall(initcall_t fn)
+int do_one_initcall(initcall_t fn)
 {
 	int count = preempt_count();
 	ktime_t t0, t1, delta;
@@ -742,16 +740,18 @@ static void __init do_one_initcall(initcall_t fn)
 		print_fn_descriptor_symbol(KERN_WARNING "initcall %s", fn);
 		printk(" returned with %s\n", msgbuf);
 	}
+
+	return result;
 }
 
 
-extern initcall_t __initcall_start[], __initcall_end[];
+extern initcall_t __initcall_start[], __initcall_end[], __early_initcall_end[];
 
 static void __init do_initcalls(void)
 {
 	initcall_t *call;
 
-	for (call = __initcall_start; call < __initcall_end; call++)
+	for (call = __early_initcall_end; call < __initcall_end; call++)
 		do_one_initcall(*call);
 
 	/* Make sure there is no pending stuff from the initcall sequence */
@@ -776,24 +776,12 @@ static void __init do_basic_setup(void)
 	do_initcalls();
 }
 
-static int __initdata nosoftlockup;
-
-static int __init nosoftlockup_setup(char *str)
-{
-	nosoftlockup = 1;
-	return 1;
-}
-__setup("nosoftlockup", nosoftlockup_setup);
-
 static void __init do_pre_smp_initcalls(void)
 {
-	extern int spawn_ksoftirqd(void);
+	initcall_t *call;
 
-	init_call_single_data();
-	migration_init();
-	spawn_ksoftirqd();
-	if (!nosoftlockup)
-		spawn_softlockup_task();
+	for (call = __initcall_start; call < __early_initcall_end; call++)
+		do_one_initcall(*call);
 }
 
 static void run_init_process(char *init_filename)
diff --git a/init/version.c b/init/version.c
index 9d17d70ee02d..52a8b98642b8 100644
--- a/init/version.c
+++ b/init/version.c
@@ -13,10 +13,13 @@
 #include <linux/utsrelease.h>
 #include <linux/version.h>
 
+#ifndef CONFIG_KALLSYMS
 #define version(a) Version_ ## a
 #define version_string(a) version(a)
 
+extern int version_string(LINUX_VERSION_CODE);
 int version_string(LINUX_VERSION_CODE);
+#endif
 
 struct uts_namespace init_uts_ns = {
 	.kref = {
diff --git a/ipc/ipc_sysctl.c b/ipc/ipc_sysctl.c
index d3497465cc0a..69bc85978ba0 100644
--- a/ipc/ipc_sysctl.c
+++ b/ipc/ipc_sysctl.c
@@ -27,15 +27,17 @@ static void *get_ipc(ctl_table *table)
 }
 
 /*
- * Routine that is called when a tunable has successfully been changed by
- * hand and it has a callback routine registered on the ipc namespace notifier
- * chain: we don't want such tunables to be recomputed anymore upon memory
- * add/remove or ipc namespace creation/removal.
- * They can come back to a recomputable state by being set to a <0 value.
+ * Routine that is called when the file "auto_msgmni" has successfully been
+ * written.
+ * Two values are allowed:
+ * 0: unregister msgmni's callback routine from the ipc namespace notifier
+ *    chain. This means that msgmni won't be recomputed anymore upon memory
+ *    add/remove or ipc namespace creation/removal.
+ * 1: register back the callback routine.
  */
-static void tunable_set_callback(int val)
+static void ipc_auto_callback(int val)
 {
-	if (val >= 0)
+	if (!val)
 		unregister_ipcns_notifier(current->nsproxy->ipc_ns);
 	else {
 		/*
@@ -71,7 +73,12 @@ static int proc_ipc_callback_dointvec(ctl_table *table, int write,
 	rc = proc_dointvec(&ipc_table, write, filp, buffer, lenp, ppos);
 
 	if (write && !rc && lenp_bef == *lenp)
-		tunable_set_callback(*((int *)(ipc_table.data)));
+		/*
+		 * Tunable has successfully been changed by hand. Disable its
+		 * automatic adjustment. This simply requires unregistering
+		 * the notifiers that trigger recalculation.
+		 */
+		unregister_ipcns_notifier(current->nsproxy->ipc_ns);
 
 	return rc;
 }
@@ -87,10 +94,39 @@ static int proc_ipc_doulongvec_minmax(ctl_table *table, int write,
 					lenp, ppos);
 }
 
+static int proc_ipcauto_dointvec_minmax(ctl_table *table, int write,
+	struct file *filp, void __user *buffer, size_t *lenp, loff_t *ppos)
+{
+	struct ctl_table ipc_table;
+	size_t lenp_bef = *lenp;
+	int oldval;
+	int rc;
+
+	memcpy(&ipc_table, table, sizeof(ipc_table));
+	ipc_table.data = get_ipc(table);
+	oldval = *((int *)(ipc_table.data));
+
+	rc = proc_dointvec_minmax(&ipc_table, write, filp, buffer, lenp, ppos);
+
+	if (write && !rc && lenp_bef == *lenp) {
+		int newval = *((int *)(ipc_table.data));
+		/*
+		 * The file "auto_msgmni" has correctly been set.
+		 * React by (un)registering the corresponding tunable, if the
+		 * value has changed.
+		 */
+		if (newval != oldval)
+			ipc_auto_callback(newval);
+	}
+
+	return rc;
+}
+
 #else
 #define proc_ipc_doulongvec_minmax NULL
 #define proc_ipc_dointvec	   NULL
 #define proc_ipc_callback_dointvec NULL
+#define proc_ipcauto_dointvec_minmax NULL
 #endif
 
 #ifdef CONFIG_SYSCTL_SYSCALL
@@ -142,14 +178,11 @@ static int sysctl_ipc_registered_data(ctl_table *table, int __user *name,
 	rc = sysctl_ipc_data(table, name, nlen, oldval, oldlenp, newval,
 		newlen);
 
-	if (newval && newlen && rc > 0) {
+	if (newval && newlen && rc > 0)
 		/*
 		 * Tunable has successfully been changed from userland
 		 */
-		int *data = get_ipc(table);
-
-		tunable_set_callback(*data);
-	}
+		unregister_ipcns_notifier(current->nsproxy->ipc_ns);
 
 	return rc;
 }
@@ -158,6 +191,9 @@ static int sysctl_ipc_registered_data(ctl_table *table, int __user *name,
 #define sysctl_ipc_registered_data NULL
 #endif
 
+static int zero;
+static int one = 1;
+
 static struct ctl_table ipc_kern_table[] = {
 	{
 		.ctl_name	= KERN_SHMMAX,
@@ -222,6 +258,16 @@ static struct ctl_table ipc_kern_table[] = {
 		.proc_handler	= proc_ipc_dointvec,
 		.strategy	= sysctl_ipc_data,
 	},
+	{
+		.ctl_name	= CTL_UNNUMBERED,
+		.procname	= "auto_msgmni",
+		.data		= &init_ipc_ns.auto_msgmni,
+		.maxlen		= sizeof(int),
+		.mode		= 0644,
+		.proc_handler	= proc_ipcauto_dointvec_minmax,
+		.extra1		= &zero,
+		.extra2		= &one,
+	},
 	{}
 };
 
diff --git a/ipc/ipcns_notifier.c b/ipc/ipcns_notifier.c
index 70ff09183f7b..b9b31a4f77e1 100644
--- a/ipc/ipcns_notifier.c
+++ b/ipc/ipcns_notifier.c
@@ -55,25 +55,35 @@ static int ipcns_callback(struct notifier_block *self,
 
 int register_ipcns_notifier(struct ipc_namespace *ns)
 {
+	int rc;
+
 	memset(&ns->ipcns_nb, 0, sizeof(ns->ipcns_nb));
 	ns->ipcns_nb.notifier_call = ipcns_callback;
 	ns->ipcns_nb.priority = IPCNS_CALLBACK_PRI;
-	return blocking_notifier_chain_register(&ipcns_chain, &ns->ipcns_nb);
+	rc = blocking_notifier_chain_register(&ipcns_chain, &ns->ipcns_nb);
+	if (!rc)
+		ns->auto_msgmni = 1;
+	return rc;
 }
 
 int cond_register_ipcns_notifier(struct ipc_namespace *ns)
 {
+	int rc;
+
 	memset(&ns->ipcns_nb, 0, sizeof(ns->ipcns_nb));
 	ns->ipcns_nb.notifier_call = ipcns_callback;
 	ns->ipcns_nb.priority = IPCNS_CALLBACK_PRI;
-	return blocking_notifier_chain_cond_register(&ipcns_chain,
+	rc = blocking_notifier_chain_cond_register(&ipcns_chain,
 							&ns->ipcns_nb);
+	if (!rc)
+		ns->auto_msgmni = 1;
+	return rc;
 }
 
-int unregister_ipcns_notifier(struct ipc_namespace *ns)
+void unregister_ipcns_notifier(struct ipc_namespace *ns)
 {
-	return blocking_notifier_chain_unregister(&ipcns_chain,
-						&ns->ipcns_nb);
+	blocking_notifier_chain_unregister(&ipcns_chain, &ns->ipcns_nb);
+	ns->auto_msgmni = 0;
 }
 
 int ipcns_notify(unsigned long val)
diff --git a/ipc/mqueue.c b/ipc/mqueue.c
index 3e84b958186b..96fb36cd9874 100644
--- a/ipc/mqueue.c
+++ b/ipc/mqueue.c
@@ -207,7 +207,7 @@ static int mqueue_get_sb(struct file_system_type *fs_type,
 	return get_sb_single(fs_type, flags, data, mqueue_fill_super, mnt);
 }
 
-static void init_once(struct kmem_cache *cachep, void *foo)
+static void init_once(void *foo)
 {
 	struct mqueue_inode_info *p = (struct mqueue_inode_info *) foo;
 
@@ -314,15 +314,11 @@ static int mqueue_unlink(struct inode *dir, struct dentry *dentry)
 *	through std routines)
 */
 static ssize_t mqueue_read_file(struct file *filp, char __user *u_data,
-				size_t count, loff_t * off)
+				size_t count, loff_t *off)
 {
 	struct mqueue_inode_info *info = MQUEUE_I(filp->f_path.dentry->d_inode);
 	char buffer[FILENT_SIZE];
-	size_t slen;
-	loff_t o;
-
-	if (!count)
-		return 0;
+	ssize_t ret;
 
 	spin_lock(&info->lock);
 	snprintf(buffer, sizeof(buffer),
@@ -335,21 +331,14 @@ static ssize_t mqueue_read_file(struct file *filp, char __user *u_data,
 			pid_vnr(info->notify_owner));
 	spin_unlock(&info->lock);
 	buffer[sizeof(buffer)-1] = '\0';
-	slen = strlen(buffer)+1;
-
-	o = *off;
-	if (o > slen)
-		return 0;
-
-	if (o + count > slen)
-		count = slen - o;
 
-	if (copy_to_user(u_data, buffer + o, count))
-		return -EFAULT;
+	ret = simple_read_from_buffer(u_data, count, off, buffer,
+				strlen(buffer));
+	if (ret <= 0)
+		return ret;
 
-	*off = o + count;
 	filp->f_path.dentry->d_inode->i_atime = filp->f_path.dentry->d_inode->i_ctime = CURRENT_TIME;
-	return count;
+	return ret;
 }
 
 static int mqueue_flush_file(struct file *filp, fl_owner_t id)
@@ -649,7 +638,7 @@ static int oflag2acc[O_ACCMODE] = { MAY_READ, MAY_WRITE,
 		return ERR_PTR(-EINVAL);
 	}
 
-	if (permission(dentry->d_inode, oflag2acc[oflag & O_ACCMODE], NULL)) {
+	if (inode_permission(dentry->d_inode, oflag2acc[oflag & O_ACCMODE])) {
 		dput(dentry);
 		mntput(mqueue_mnt);
 		return ERR_PTR(-EACCES);
diff --git a/ipc/sem.c b/ipc/sem.c
index e9418df5ff3e..bf1bc36cb7ee 100644
--- a/ipc/sem.c
+++ b/ipc/sem.c
@@ -272,9 +272,8 @@ static int newary(struct ipc_namespace *ns, struct ipc_params *params)
 	ns->used_sems += nsems;
 
 	sma->sem_base = (struct sem *) &sma[1];
-	/* sma->sem_pending = NULL; */
-	sma->sem_pending_last = &sma->sem_pending;
-	/* sma->undo = NULL; */
+	INIT_LIST_HEAD(&sma->sem_pending);
+	INIT_LIST_HEAD(&sma->list_id);
 	sma->sem_nsems = nsems;
 	sma->sem_ctime = get_seconds();
 	sem_unlock(sma);
@@ -331,38 +330,6 @@ asmlinkage long sys_semget(key_t key, int nsems, int semflg)
 	return ipcget(ns, &sem_ids(ns), &sem_ops, &sem_params);
 }
 
-/* Manage the doubly linked list sma->sem_pending as a FIFO:
- * insert new queue elements at the tail sma->sem_pending_last.
- */
-static inline void append_to_queue (struct sem_array * sma,
-				    struct sem_queue * q)
-{
-	*(q->prev = sma->sem_pending_last) = q;
-	*(sma->sem_pending_last = &q->next) = NULL;
-}
-
-static inline void prepend_to_queue (struct sem_array * sma,
-				     struct sem_queue * q)
-{
-	q->next = sma->sem_pending;
-	*(q->prev = &sma->sem_pending) = q;
-	if (q->next)
-		q->next->prev = &q->next;
-	else /* sma->sem_pending_last == &sma->sem_pending */
-		sma->sem_pending_last = &q->next;
-}
-
-static inline void remove_from_queue (struct sem_array * sma,
-				      struct sem_queue * q)
-{
-	*(q->prev) = q->next;
-	if (q->next)
-		q->next->prev = q->prev;
-	else /* sma->sem_pending_last == &q->next */
-		sma->sem_pending_last = q->prev;
-	q->prev = NULL; /* mark as removed */
-}
-
 /*
  * Determine whether a sequence of semaphore operations would succeed
  * all at once. Return 0 if yes, 1 if need to sleep, else return error code.
@@ -438,16 +405,15 @@ static void update_queue (struct sem_array * sma)
 	int error;
 	struct sem_queue * q;
 
-	q = sma->sem_pending;
-	while(q) {
+	q = list_entry(sma->sem_pending.next, struct sem_queue, list);
+	while (&q->list != &sma->sem_pending) {
 		error = try_atomic_semop(sma, q->sops, q->nsops,
 					 q->undo, q->pid);
 
 		/* Does q->sleeper still need to sleep? */
 		if (error <= 0) {
 			struct sem_queue *n;
-			remove_from_queue(sma,q);
-			q->status = IN_WAKEUP;
+
 			/*
 			 * Continue scanning. The next operation
 			 * that must be checked depends on the type of the
@@ -458,11 +424,26 @@ static void update_queue (struct sem_array * sma)
 			 *   for semaphore values to become 0.
 			 * - if the operation didn't modify the array,
 			 *   then just continue.
+			 * The order of list_del() and reading ->next
+			 * is crucial: In the former case, the list_del()
+			 * must be done first [because we might be the
+			 * first entry in ->sem_pending], in the latter
+			 * case the list_del() must be done last
+			 * [because the list is invalid after the list_del()]
 			 */
-			if (q->alter)
-				n = sma->sem_pending;
-			else
-				n = q->next;
+			if (q->alter) {
+				list_del(&q->list);
+				n = list_entry(sma->sem_pending.next,
+						struct sem_queue, list);
+			} else {
+				n = list_entry(q->list.next, struct sem_queue,
+						list);
+				list_del(&q->list);
+			}
+
+			/* wake up the waiting thread */
+			q->status = IN_WAKEUP;
+
 			wake_up_process(q->sleeper);
 			/* hands-off: q will disappear immediately after
 			 * writing q->status.
@@ -471,7 +452,7 @@ static void update_queue (struct sem_array * sma)
 			q->status = error;
 			q = n;
 		} else {
-			q = q->next;
+			q = list_entry(q->list.next, struct sem_queue, list);
 		}
 	}
 }
@@ -491,7 +472,7 @@ static int count_semncnt (struct sem_array * sma, ushort semnum)
 	struct sem_queue * q;
 
 	semncnt = 0;
-	for (q = sma->sem_pending; q; q = q->next) {
+	list_for_each_entry(q, &sma->sem_pending, list) {
 		struct sembuf * sops = q->sops;
 		int nsops = q->nsops;
 		int i;
@@ -503,13 +484,14 @@ static int count_semncnt (struct sem_array * sma, ushort semnum)
 	}
 	return semncnt;
 }
+
 static int count_semzcnt (struct sem_array * sma, ushort semnum)
 {
 	int semzcnt;
 	struct sem_queue * q;
 
 	semzcnt = 0;
-	for (q = sma->sem_pending; q; q = q->next) {
+	list_for_each_entry(q, &sma->sem_pending, list) {
 		struct sembuf * sops = q->sops;
 		int nsops = q->nsops;
 		int i;
@@ -522,35 +504,41 @@ static int count_semzcnt (struct sem_array * sma, ushort semnum)
 	return semzcnt;
 }
 
+void free_un(struct rcu_head *head)
+{
+	struct sem_undo *un = container_of(head, struct sem_undo, rcu);
+	kfree(un);
+}
+
 /* Free a semaphore set. freeary() is called with sem_ids.rw_mutex locked
  * as a writer and the spinlock for this semaphore set hold. sem_ids.rw_mutex
  * remains locked on exit.
  */
 static void freeary(struct ipc_namespace *ns, struct kern_ipc_perm *ipcp)
 {
-	struct sem_undo *un;
-	struct sem_queue *q;
+	struct sem_undo *un, *tu;
+	struct sem_queue *q, *tq;
 	struct sem_array *sma = container_of(ipcp, struct sem_array, sem_perm);
 
-	/* Invalidate the existing undo structures for this semaphore set.
-	 * (They will be freed without any further action in exit_sem()
-	 * or during the next semop.)
-	 */
-	for (un = sma->undo; un; un = un->id_next)
+	/* Free the existing undo structures for this semaphore set.  */
+	assert_spin_locked(&sma->sem_perm.lock);
+	list_for_each_entry_safe(un, tu, &sma->list_id, list_id) {
+		list_del(&un->list_id);
+		spin_lock(&un->ulp->lock);
 		un->semid = -1;
+		list_del_rcu(&un->list_proc);
+		spin_unlock(&un->ulp->lock);
+		call_rcu(&un->rcu, free_un);
+	}
 
 	/* Wake up all pending processes and let them fail with EIDRM. */
-	q = sma->sem_pending;
-	while(q) {
-		struct sem_queue *n;
-		/* lazy remove_from_queue: we are killing the whole queue */
-		q->prev = NULL;
-		n = q->next;
+	list_for_each_entry_safe(q, tq, &sma->sem_pending, list) {
+		list_del(&q->list);
+
 		q->status = IN_WAKEUP;
 		wake_up_process(q->sleeper); /* doesn't sleep */
 		smp_wmb();
 		q->status = -EIDRM;	/* hands-off q */
-		q = n;
 	}
 
 	/* Remove the semaphore set from the IDR */
@@ -763,9 +751,12 @@ static int semctl_main(struct ipc_namespace *ns, int semid, int semnum,
 
 		for (i = 0; i < nsems; i++)
 			sma->sem_base[i].semval = sem_io[i];
-		for (un = sma->undo; un; un = un->id_next)
+
+		assert_spin_locked(&sma->sem_perm.lock);
+		list_for_each_entry(un, &sma->list_id, list_id) {
 			for (i = 0; i < nsems; i++)
 				un->semadj[i] = 0;
+		}
 		sma->sem_ctime = get_seconds();
 		/* maybe some queued-up processes were waiting for this */
 		update_queue(sma);
@@ -797,12 +788,15 @@ static int semctl_main(struct ipc_namespace *ns, int semid, int semnum,
 	{
 		int val = arg.val;
 		struct sem_undo *un;
+
 		err = -ERANGE;
 		if (val > SEMVMX || val < 0)
 			goto out_unlock;
 
-		for (un = sma->undo; un; un = un->id_next)
+		assert_spin_locked(&sma->sem_perm.lock);
+		list_for_each_entry(un, &sma->list_id, list_id)
 			un->semadj[semnum] = 0;
+
 		curr->semval = val;
 		curr->sempid = task_tgid_vnr(current);
 		sma->sem_ctime = get_seconds();
@@ -952,6 +946,8 @@ static inline int get_undo_list(struct sem_undo_list **undo_listp)
 			return -ENOMEM;
 		spin_lock_init(&undo_list->lock);
 		atomic_set(&undo_list->refcnt, 1);
+		INIT_LIST_HEAD(&undo_list->list_proc);
+
 		current->sysvsem.undo_list = undo_list;
 	}
 	*undo_listp = undo_list;
@@ -960,25 +956,27 @@ static inline int get_undo_list(struct sem_undo_list **undo_listp)
 
 static struct sem_undo *lookup_undo(struct sem_undo_list *ulp, int semid)
 {
-	struct sem_undo **last, *un;
+	struct sem_undo *walk;
 
-	last = &ulp->proc_list;
-	un = *last;
-	while(un != NULL) {
-		if(un->semid==semid)
-			break;
-		if(un->semid==-1) {
-			*last=un->proc_next;
-			kfree(un);
-		} else {
-			last=&un->proc_next;
-		}
-		un=*last;
+	list_for_each_entry_rcu(walk, &ulp->list_proc, list_proc) {
+		if (walk->semid == semid)
+			return walk;
 	}
-	return un;
+	return NULL;
 }
 
-static struct sem_undo *find_undo(struct ipc_namespace *ns, int semid)
+/**
+ * find_alloc_undo - Lookup (and if not present create) undo array
+ * @ns: namespace
+ * @semid: semaphore array id
+ *
+ * The function looks up (and if not present creates) the undo structure.
+ * The size of the undo structure depends on the size of the semaphore
+ * array, thus the alloc path is not that straightforward.
+ * Lifetime-rules: sem_undo is rcu-protected, on success, the function
+ * performs a rcu_read_lock().
+ */
+static struct sem_undo *find_alloc_undo(struct ipc_namespace *ns, int semid)
 {
 	struct sem_array *sma;
 	struct sem_undo_list *ulp;
@@ -990,13 +988,16 @@ static struct sem_undo *find_undo(struct ipc_namespace *ns, int semid)
 	if (error)
 		return ERR_PTR(error);
 
+	rcu_read_lock();
 	spin_lock(&ulp->lock);
 	un = lookup_undo(ulp, semid);
 	spin_unlock(&ulp->lock);
 	if (likely(un!=NULL))
 		goto out;
+	rcu_read_unlock();
 
 	/* no undo structure around - allocate one. */
+	/* step 1: figure out the size of the semaphore array */
 	sma = sem_lock_check(ns, semid);
 	if (IS_ERR(sma))
 		return ERR_PTR(PTR_ERR(sma));
@@ -1004,37 +1005,45 @@ static struct sem_undo *find_undo(struct ipc_namespace *ns, int semid)
 	nsems = sma->sem_nsems;
 	sem_getref_and_unlock(sma);
 
+	/* step 2: allocate new undo structure */
 	new = kzalloc(sizeof(struct sem_undo) + sizeof(short)*nsems, GFP_KERNEL);
 	if (!new) {
 		sem_putref(sma);
 		return ERR_PTR(-ENOMEM);
 	}
-	new->semadj = (short *) &new[1];
-	new->semid = semid;
 
-	spin_lock(&ulp->lock);
-	un = lookup_undo(ulp, semid);
-	if (un) {
-		spin_unlock(&ulp->lock);
-		kfree(new);
-		sem_putref(sma);
-		goto out;
-	}
+	/* step 3: Acquire the lock on semaphore array */
 	sem_lock_and_putref(sma);
 	if (sma->sem_perm.deleted) {
 		sem_unlock(sma);
-		spin_unlock(&ulp->lock);
 		kfree(new);
 		un = ERR_PTR(-EIDRM);
 		goto out;
 	}
-	new->proc_next = ulp->proc_list;
-	ulp->proc_list = new;
-	new->id_next = sma->undo;
-	sma->undo = new;
-	sem_unlock(sma);
+	spin_lock(&ulp->lock);
+
+	/*
+	 * step 4: check for races: did someone else allocate the undo struct?
+	 */
+	un = lookup_undo(ulp, semid);
+	if (un) {
+		kfree(new);
+		goto success;
+	}
+	/* step 5: initialize & link new undo structure */
+	new->semadj = (short *) &new[1];
+	new->ulp = ulp;
+	new->semid = semid;
+	assert_spin_locked(&ulp->lock);
+	list_add_rcu(&new->list_proc, &ulp->list_proc);
+	assert_spin_locked(&sma->sem_perm.lock);
+	list_add(&new->list_id, &sma->list_id);
 	un = new;
+
+success:
 	spin_unlock(&ulp->lock);
+	rcu_read_lock();
+	sem_unlock(sma);
 out:
 	return un;
 }
@@ -1090,9 +1099,8 @@ asmlinkage long sys_semtimedop(int semid, struct sembuf __user *tsops,
 			alter = 1;
 	}
 
-retry_undos:
 	if (undos) {
-		un = find_undo(ns, semid);
+		un = find_alloc_undo(ns, semid);
 		if (IS_ERR(un)) {
 			error = PTR_ERR(un);
 			goto out_free;
@@ -1102,19 +1110,37 @@ retry_undos:
 
 	sma = sem_lock_check(ns, semid);
 	if (IS_ERR(sma)) {
+		if (un)
+			rcu_read_unlock();
 		error = PTR_ERR(sma);
 		goto out_free;
 	}
 
 	/*
-	 * semid identifiers are not unique - find_undo may have
+	 * semid identifiers are not unique - find_alloc_undo may have
 	 * allocated an undo structure, it was invalidated by an RMID
-	 * and now a new array with received the same id. Check and retry.
+	 * and now a new array with received the same id. Check and fail.
+	 * This case can be detected checking un->semid. The existance of
+	 * "un" itself is guaranteed by rcu.
 	 */
-	if (un && un->semid == -1) {
-		sem_unlock(sma);
-		goto retry_undos;
+	error = -EIDRM;
+	if (un) {
+		if (un->semid == -1) {
+			rcu_read_unlock();
+			goto out_unlock_free;
+		} else {
+			/*
+			 * rcu lock can be released, "un" cannot disappear:
+			 * - sem_lock is acquired, thus IPC_RMID is
+			 *   impossible.
+			 * - exit_sem is impossible, it always operates on
+			 *   current (or a dead task).
+			 */
+
+			rcu_read_unlock();
+		}
 	}
+
 	error = -EFBIG;
 	if (max >= sma->sem_nsems)
 		goto out_unlock_free;
@@ -1138,17 +1164,15 @@ retry_undos:
 	 * task into the pending queue and go to sleep.
 	 */
 		
-	queue.sma = sma;
 	queue.sops = sops;
 	queue.nsops = nsops;
 	queue.undo = un;
 	queue.pid = task_tgid_vnr(current);
-	queue.id = semid;
 	queue.alter = alter;
 	if (alter)
-		append_to_queue(sma ,&queue);
+		list_add_tail(&queue.list, &sma->sem_pending);
 	else
-		prepend_to_queue(sma ,&queue);
+		list_add(&queue.list, &sma->sem_pending);
 
 	queue.status = -EINTR;
 	queue.sleeper = current;
@@ -1174,7 +1198,6 @@ retry_undos:
 
 	sma = sem_lock(ns, semid);
 	if (IS_ERR(sma)) {
-		BUG_ON(queue.prev != NULL);
 		error = -EIDRM;
 		goto out_free;
 	}
@@ -1192,7 +1215,7 @@ retry_undos:
 	 */
 	if (timeout && jiffies_left == 0)
 		error = -EAGAIN;
-	remove_from_queue(sma,&queue);
+	list_del(&queue.list);
 	goto out_unlock_free;
 
 out_unlock_free:
@@ -1243,56 +1266,62 @@ int copy_semundo(unsigned long clone_flags, struct task_struct *tsk)
  */
 void exit_sem(struct task_struct *tsk)
 {
-	struct sem_undo_list *undo_list;
-	struct sem_undo *u, **up;
-	struct ipc_namespace *ns;
+	struct sem_undo_list *ulp;
 
-	undo_list = tsk->sysvsem.undo_list;
-	if (!undo_list)
+	ulp = tsk->sysvsem.undo_list;
+	if (!ulp)
 		return;
 	tsk->sysvsem.undo_list = NULL;
 
-	if (!atomic_dec_and_test(&undo_list->refcnt))
+	if (!atomic_dec_and_test(&ulp->refcnt))
 		return;
 
-	ns = tsk->nsproxy->ipc_ns;
-	/* There's no need to hold the semundo list lock, as current
-         * is the last task exiting for this undo list.
-	 */
-	for (up = &undo_list->proc_list; (u = *up); *up = u->proc_next, kfree(u)) {
+	for (;;) {
 		struct sem_array *sma;
-		int nsems, i;
-		struct sem_undo *un, **unp;
+		struct sem_undo *un;
 		int semid;
-	       
-		semid = u->semid;
+		int i;
 
-		if(semid == -1)
-			continue;
-		sma = sem_lock(ns, semid);
+		rcu_read_lock();
+		un = list_entry(rcu_dereference(ulp->list_proc.next),
+					struct sem_undo, list_proc);
+		if (&un->list_proc == &ulp->list_proc)
+			semid = -1;
+		 else
+			semid = un->semid;
+		rcu_read_unlock();
+
+		if (semid == -1)
+			break;
+
+		sma = sem_lock_check(tsk->nsproxy->ipc_ns, un->semid);
+
+		/* exit_sem raced with IPC_RMID, nothing to do */
 		if (IS_ERR(sma))
 			continue;
 
-		if (u->semid == -1)
-			goto next_entry;
+		un = lookup_undo(ulp, semid);
+		if (un == NULL) {
+			/* exit_sem raced with IPC_RMID+semget() that created
+			 * exactly the same semid. Nothing to do.
+			 */
+			sem_unlock(sma);
+			continue;
+		}
 
-		BUG_ON(sem_checkid(sma, u->semid));
+		/* remove un from the linked lists */
+		assert_spin_locked(&sma->sem_perm.lock);
+		list_del(&un->list_id);
 
-		/* remove u from the sma->undo list */
-		for (unp = &sma->undo; (un = *unp); unp = &un->id_next) {
-			if (u == un)
-				goto found;
-		}
-		printk ("exit_sem undo list error id=%d\n", u->semid);
-		goto next_entry;
-found:
-		*unp = un->id_next;
-		/* perform adjustments registered in u */
-		nsems = sma->sem_nsems;
-		for (i = 0; i < nsems; i++) {
+		spin_lock(&ulp->lock);
+		list_del_rcu(&un->list_proc);
+		spin_unlock(&ulp->lock);
+
+		/* perform adjustments registered in un */
+		for (i = 0; i < sma->sem_nsems; i++) {
 			struct sem * semaphore = &sma->sem_base[i];
-			if (u->semadj[i]) {
-				semaphore->semval += u->semadj[i];
+			if (un->semadj[i]) {
+				semaphore->semval += un->semadj[i];
 				/*
 				 * Range checks of the new semaphore value,
 				 * not defined by sus:
@@ -1316,10 +1345,11 @@ found:
 		sma->sem_otime = get_seconds();
 		/* maybe some queued-up processes were waiting for this */
 		update_queue(sma);
-next_entry:
 		sem_unlock(sma);
+
+		call_rcu(&un->rcu, free_un);
 	}
-	kfree(undo_list);
+	kfree(ulp);
 }
 
 #ifdef CONFIG_PROC_FS
diff --git a/ipc/shm.c b/ipc/shm.c
index a726aebce7d7..e77ec698cf40 100644
--- a/ipc/shm.c
+++ b/ipc/shm.c
@@ -112,23 +112,8 @@ void __init shm_init (void)
 }
 
 /*
- * shm_lock_(check_)down routines are called in the paths where the rw_mutex
- * is held to protect access to the idr tree.
- */
-static inline struct shmid_kernel *shm_lock_down(struct ipc_namespace *ns,
-						int id)
-{
-	struct kern_ipc_perm *ipcp = ipc_lock_down(&shm_ids(ns), id);
-
-	if (IS_ERR(ipcp))
-		return (struct shmid_kernel *)ipcp;
-
-	return container_of(ipcp, struct shmid_kernel, shm_perm);
-}
-
-/*
  * shm_lock_(check_) routines are called in the paths where the rw_mutex
- * is not held.
+ * is not necessarily held.
  */
 static inline struct shmid_kernel *shm_lock(struct ipc_namespace *ns, int id)
 {
@@ -211,7 +196,7 @@ static void shm_close(struct vm_area_struct *vma)
 
 	down_write(&shm_ids(ns).rw_mutex);
 	/* remove from the list of attaches of the shm segment */
-	shp = shm_lock_down(ns, sfd->id);
+	shp = shm_lock(ns, sfd->id);
 	BUG_ON(IS_ERR(shp));
 	shp->shm_lprid = task_tgid_vnr(current);
 	shp->shm_dtim = get_seconds();
@@ -932,7 +917,7 @@ invalid:
 
 out_nattch:
 	down_write(&shm_ids(ns).rw_mutex);
-	shp = shm_lock_down(ns, shmid);
+	shp = shm_lock(ns, shmid);
 	BUG_ON(IS_ERR(shp));
 	shp->shm_nattch--;
 	if(shp->shm_nattch == 0 &&
diff --git a/ipc/util.c b/ipc/util.c
index 3339177b336c..49b3ea615dc5 100644
--- a/ipc/util.c
+++ b/ipc/util.c
@@ -688,10 +688,6 @@ void ipc64_perm_to_ipc_perm (struct ipc64_perm *in, struct ipc_perm *out)
  * Look for an id in the ipc ids idr and lock the associated ipc object.
  *
  * The ipc object is locked on exit.
- *
- * This is the routine that should be called when the rw_mutex is not already
- * held, i.e. idr tree not protected: it protects the idr tree in read mode
- * during the idr_find().
  */
 
 struct kern_ipc_perm *ipc_lock(struct ipc_ids *ids, int id)
@@ -699,18 +695,13 @@ struct kern_ipc_perm *ipc_lock(struct ipc_ids *ids, int id)
 	struct kern_ipc_perm *out;
 	int lid = ipcid_to_idx(id);
 
-	down_read(&ids->rw_mutex);
-
 	rcu_read_lock();
 	out = idr_find(&ids->ipcs_idr, lid);
 	if (out == NULL) {
 		rcu_read_unlock();
-		up_read(&ids->rw_mutex);
 		return ERR_PTR(-EINVAL);
 	}
 
-	up_read(&ids->rw_mutex);
-
 	spin_lock(&out->lock);
 	
 	/* ipc_rmid() may have already freed the ID while ipc_lock
@@ -725,56 +716,6 @@ struct kern_ipc_perm *ipc_lock(struct ipc_ids *ids, int id)
 	return out;
 }
 
-/**
- * ipc_lock_down - Lock an ipc structure with rw_sem held
- * @ids: IPC identifier set
- * @id: ipc id to look for
- *
- * Look for an id in the ipc ids idr and lock the associated ipc object.
- *
- * The ipc object is locked on exit.
- *
- * This is the routine that should be called when the rw_mutex is already
- * held, i.e. idr tree protected.
- */
-
-struct kern_ipc_perm *ipc_lock_down(struct ipc_ids *ids, int id)
-{
-	struct kern_ipc_perm *out;
-	int lid = ipcid_to_idx(id);
-
-	rcu_read_lock();
-	out = idr_find(&ids->ipcs_idr, lid);
-	if (out == NULL) {
-		rcu_read_unlock();
-		return ERR_PTR(-EINVAL);
-	}
-
-	spin_lock(&out->lock);
-
-	/*
-	 * No need to verify that the structure is still valid since the
-	 * rw_mutex is held.
-	 */
-	return out;
-}
-
-struct kern_ipc_perm *ipc_lock_check_down(struct ipc_ids *ids, int id)
-{
-	struct kern_ipc_perm *out;
-
-	out = ipc_lock_down(ids, id);
-	if (IS_ERR(out))
-		return out;
-
-	if (ipc_checkid(out, id)) {
-		ipc_unlock(out);
-		return ERR_PTR(-EIDRM);
-	}
-
-	return out;
-}
-
 struct kern_ipc_perm *ipc_lock_check(struct ipc_ids *ids, int id)
 {
 	struct kern_ipc_perm *out;
@@ -846,7 +787,7 @@ struct kern_ipc_perm *ipcctl_pre_down(struct ipc_ids *ids, int id, int cmd,
 	int err;
 
 	down_write(&ids->rw_mutex);
-	ipcp = ipc_lock_check_down(ids, id);
+	ipcp = ipc_lock_check(ids, id);
 	if (IS_ERR(ipcp)) {
 		err = PTR_ERR(ipcp);
 		goto out_up;
diff --git a/ipc/util.h b/ipc/util.h
index cdb966aebe07..3646b45a03c9 100644
--- a/ipc/util.h
+++ b/ipc/util.h
@@ -102,11 +102,6 @@ void* ipc_rcu_alloc(int size);
 void ipc_rcu_getref(void *ptr);
 void ipc_rcu_putref(void *ptr);
 
-/*
- * ipc_lock_down: called with rw_mutex held
- * ipc_lock: called without that lock held
- */
-struct kern_ipc_perm *ipc_lock_down(struct ipc_ids *, int);
 struct kern_ipc_perm *ipc_lock(struct ipc_ids *, int);
 
 void kernel_to_ipc64_perm(struct kern_ipc_perm *in, struct ipc64_perm *out);
@@ -155,7 +150,6 @@ static inline void ipc_unlock(struct kern_ipc_perm *perm)
 	rcu_read_unlock();
 }
 
-struct kern_ipc_perm *ipc_lock_check_down(struct ipc_ids *ids, int id);
 struct kern_ipc_perm *ipc_lock_check(struct ipc_ids *ids, int id);
 int ipcget(struct ipc_namespace *ns, struct ipc_ids *ids,
 			struct ipc_ops *ops, struct ipc_params *params);
diff --git a/kernel/Kconfig.hz b/kernel/Kconfig.hz
index 382dd5a8b2d7..94fabd534b03 100644
--- a/kernel/Kconfig.hz
+++ b/kernel/Kconfig.hz
@@ -55,4 +55,4 @@ config HZ
 	default 1000 if HZ_1000
 
 config SCHED_HRTICK
-	def_bool HIGH_RES_TIMERS && USE_GENERIC_SMP_HELPERS
+	def_bool HIGH_RES_TIMERS && (!SMP || USE_GENERIC_SMP_HELPERS)
diff --git a/kernel/Makefile b/kernel/Makefile
index 15ab63ffe64d..4e1d7df7c3e2 100644
--- a/kernel/Makefile
+++ b/kernel/Makefile
@@ -2,7 +2,7 @@
 # Makefile for the linux kernel.
 #
 
-obj-y     = sched.o fork.o exec_domain.o panic.o printk.o profile.o \
+obj-y     = sched.o fork.o exec_domain.o panic.o printk.o \
 	    cpu.o exit.o itimer.o time.o softirq.o resource.o \
 	    sysctl.o capability.o ptrace.o timer.o user.o \
 	    signal.o sys.o kmod.o workqueue.o pid.o \
@@ -24,6 +24,7 @@ CFLAGS_REMOVE_sched_clock.o = -pg
 CFLAGS_REMOVE_sched.o = -mno-spe -pg
 endif
 
+obj-$(CONFIG_PROFILING) += profile.o
 obj-$(CONFIG_SYSCTL_SYSCALL_CHECK) += sysctl_check.o
 obj-$(CONFIG_STACKTRACE) += stacktrace.o
 obj-y += time/
@@ -83,6 +84,7 @@ obj-$(CONFIG_TASK_DELAY_ACCT) += delayacct.o
 obj-$(CONFIG_TASKSTATS) += taskstats.o tsacct.o
 obj-$(CONFIG_MARKERS) += marker.o
 obj-$(CONFIG_LATENCYTOP) += latencytop.o
+obj-$(CONFIG_HAVE_GENERIC_DMA_COHERENT) += dma-coherent.o
 obj-$(CONFIG_FTRACE) += trace/
 obj-$(CONFIG_TRACING) += trace/
 obj-$(CONFIG_SMP) += sched_cpupri.o
diff --git a/kernel/acct.c b/kernel/acct.c
index 91e1cfd734d2..dd68b9059418 100644
--- a/kernel/acct.c
+++ b/kernel/acct.c
@@ -75,37 +75,39 @@ int acct_parm[3] = {4, 2, 30};
 /*
  * External references and all of the globals.
  */
-static void do_acct_process(struct pid_namespace *ns, struct file *);
+static void do_acct_process(struct bsd_acct_struct *acct,
+		struct pid_namespace *ns, struct file *);
 
 /*
  * This structure is used so that all the data protected by lock
  * can be placed in the same cache line as the lock.  This primes
  * the cache line to have the data after getting the lock.
  */
-struct acct_glbs {
-	spinlock_t		lock;
+struct bsd_acct_struct {
 	volatile int		active;
 	volatile int		needcheck;
 	struct file		*file;
 	struct pid_namespace	*ns;
 	struct timer_list	timer;
+	struct list_head	list;
 };
 
-static struct acct_glbs acct_globals __cacheline_aligned =
-	{__SPIN_LOCK_UNLOCKED(acct_globals.lock)};
+static DEFINE_SPINLOCK(acct_lock);
+static LIST_HEAD(acct_list);
 
 /*
  * Called whenever the timer says to check the free space.
  */
-static void acct_timeout(unsigned long unused)
+static void acct_timeout(unsigned long x)
 {
-	acct_globals.needcheck = 1;
+	struct bsd_acct_struct *acct = (struct bsd_acct_struct *)x;
+	acct->needcheck = 1;
 }
 
 /*
  * Check the amount of free space and suspend/resume accordingly.
  */
-static int check_free_space(struct file *file)
+static int check_free_space(struct bsd_acct_struct *acct, struct file *file)
 {
 	struct kstatfs sbuf;
 	int res;
@@ -113,11 +115,11 @@ static int check_free_space(struct file *file)
 	sector_t resume;
 	sector_t suspend;
 
-	spin_lock(&acct_globals.lock);
-	res = acct_globals.active;
-	if (!file || !acct_globals.needcheck)
+	spin_lock(&acct_lock);
+	res = acct->active;
+	if (!file || !acct->needcheck)
 		goto out;
-	spin_unlock(&acct_globals.lock);
+	spin_unlock(&acct_lock);
 
 	/* May block */
 	if (vfs_statfs(file->f_path.dentry, &sbuf))
@@ -136,35 +138,35 @@ static int check_free_space(struct file *file)
 		act = 0;
 
 	/*
-	 * If some joker switched acct_globals.file under us we'ld better be
+	 * If some joker switched acct->file under us we'ld better be
 	 * silent and _not_ touch anything.
 	 */
-	spin_lock(&acct_globals.lock);
-	if (file != acct_globals.file) {
+	spin_lock(&acct_lock);
+	if (file != acct->file) {
 		if (act)
 			res = act>0;
 		goto out;
 	}
 
-	if (acct_globals.active) {
+	if (acct->active) {
 		if (act < 0) {
-			acct_globals.active = 0;
+			acct->active = 0;
 			printk(KERN_INFO "Process accounting paused\n");
 		}
 	} else {
 		if (act > 0) {
-			acct_globals.active = 1;
+			acct->active = 1;
 			printk(KERN_INFO "Process accounting resumed\n");
 		}
 	}
 
-	del_timer(&acct_globals.timer);
-	acct_globals.needcheck = 0;
-	acct_globals.timer.expires = jiffies + ACCT_TIMEOUT*HZ;
-	add_timer(&acct_globals.timer);
-	res = acct_globals.active;
+	del_timer(&acct->timer);
+	acct->needcheck = 0;
+	acct->timer.expires = jiffies + ACCT_TIMEOUT*HZ;
+	add_timer(&acct->timer);
+	res = acct->active;
 out:
-	spin_unlock(&acct_globals.lock);
+	spin_unlock(&acct_lock);
 	return res;
 }
 
@@ -172,39 +174,41 @@ out:
  * Close the old accounting file (if currently open) and then replace
  * it with file (if non-NULL).
  *
- * NOTE: acct_globals.lock MUST be held on entry and exit.
+ * NOTE: acct_lock MUST be held on entry and exit.
  */
-static void acct_file_reopen(struct file *file)
+static void acct_file_reopen(struct bsd_acct_struct *acct, struct file *file,
+		struct pid_namespace *ns)
 {
 	struct file *old_acct = NULL;
 	struct pid_namespace *old_ns = NULL;
 
-	if (acct_globals.file) {
-		old_acct = acct_globals.file;
-		old_ns = acct_globals.ns;
-		del_timer(&acct_globals.timer);
-		acct_globals.active = 0;
-		acct_globals.needcheck = 0;
-		acct_globals.file = NULL;
+	if (acct->file) {
+		old_acct = acct->file;
+		old_ns = acct->ns;
+		del_timer(&acct->timer);
+		acct->active = 0;
+		acct->needcheck = 0;
+		acct->file = NULL;
+		acct->ns = NULL;
+		list_del(&acct->list);
 	}
 	if (file) {
-		acct_globals.file = file;
-		acct_globals.ns = get_pid_ns(task_active_pid_ns(current));
-		acct_globals.needcheck = 0;
-		acct_globals.active = 1;
+		acct->file = file;
+		acct->ns = ns;
+		acct->needcheck = 0;
+		acct->active = 1;
+		list_add(&acct->list, &acct_list);
 		/* It's been deleted if it was used before so this is safe */
-		init_timer(&acct_globals.timer);
-		acct_globals.timer.function = acct_timeout;
-		acct_globals.timer.expires = jiffies + ACCT_TIMEOUT*HZ;
-		add_timer(&acct_globals.timer);
+		setup_timer(&acct->timer, acct_timeout, (unsigned long)acct);
+		acct->timer.expires = jiffies + ACCT_TIMEOUT*HZ;
+		add_timer(&acct->timer);
 	}
 	if (old_acct) {
 		mnt_unpin(old_acct->f_path.mnt);
-		spin_unlock(&acct_globals.lock);
-		do_acct_process(old_ns, old_acct);
+		spin_unlock(&acct_lock);
+		do_acct_process(acct, old_ns, old_acct);
 		filp_close(old_acct, NULL);
-		put_pid_ns(old_ns);
-		spin_lock(&acct_globals.lock);
+		spin_lock(&acct_lock);
 	}
 }
 
@@ -212,6 +216,8 @@ static int acct_on(char *name)
 {
 	struct file *file;
 	int error;
+	struct pid_namespace *ns;
+	struct bsd_acct_struct *acct = NULL;
 
 	/* Difference from BSD - they don't do O_APPEND */
 	file = filp_open(name, O_WRONLY|O_APPEND|O_LARGEFILE, 0);
@@ -228,18 +234,34 @@ static int acct_on(char *name)
 		return -EIO;
 	}
 
+	ns = task_active_pid_ns(current);
+	if (ns->bacct == NULL) {
+		acct = kzalloc(sizeof(struct bsd_acct_struct), GFP_KERNEL);
+		if (acct == NULL) {
+			filp_close(file, NULL);
+			return -ENOMEM;
+		}
+	}
+
 	error = security_acct(file);
 	if (error) {
+		kfree(acct);
 		filp_close(file, NULL);
 		return error;
 	}
 
-	spin_lock(&acct_globals.lock);
+	spin_lock(&acct_lock);
+	if (ns->bacct == NULL) {
+		ns->bacct = acct;
+		acct = NULL;
+	}
+
 	mnt_pin(file->f_path.mnt);
-	acct_file_reopen(file);
-	spin_unlock(&acct_globals.lock);
+	acct_file_reopen(ns->bacct, file, ns);
+	spin_unlock(&acct_lock);
 
 	mntput(file->f_path.mnt); /* it's pinned, now give up active reference */
+	kfree(acct);
 
 	return 0;
 }
@@ -269,11 +291,17 @@ asmlinkage long sys_acct(const char __user *name)
 		error = acct_on(tmp);
 		putname(tmp);
 	} else {
+		struct bsd_acct_struct *acct;
+
+		acct = task_active_pid_ns(current)->bacct;
+		if (acct == NULL)
+			return 0;
+
 		error = security_acct(NULL);
 		if (!error) {
-			spin_lock(&acct_globals.lock);
-			acct_file_reopen(NULL);
-			spin_unlock(&acct_globals.lock);
+			spin_lock(&acct_lock);
+			acct_file_reopen(acct, NULL, NULL);
+			spin_unlock(&acct_lock);
 		}
 	}
 	return error;
@@ -288,10 +316,16 @@ asmlinkage long sys_acct(const char __user *name)
  */
 void acct_auto_close_mnt(struct vfsmount *m)
 {
-	spin_lock(&acct_globals.lock);
-	if (acct_globals.file && acct_globals.file->f_path.mnt == m)
-		acct_file_reopen(NULL);
-	spin_unlock(&acct_globals.lock);
+	struct bsd_acct_struct *acct;
+
+	spin_lock(&acct_lock);
+restart:
+	list_for_each_entry(acct, &acct_list, list)
+		if (acct->file && acct->file->f_path.mnt == m) {
+			acct_file_reopen(acct, NULL, NULL);
+			goto restart;
+		}
+	spin_unlock(&acct_lock);
 }
 
 /**
@@ -303,12 +337,31 @@ void acct_auto_close_mnt(struct vfsmount *m)
  */
 void acct_auto_close(struct super_block *sb)
 {
-	spin_lock(&acct_globals.lock);
-	if (acct_globals.file &&
-	    acct_globals.file->f_path.mnt->mnt_sb == sb) {
-		acct_file_reopen(NULL);
+	struct bsd_acct_struct *acct;
+
+	spin_lock(&acct_lock);
+restart:
+	list_for_each_entry(acct, &acct_list, list)
+		if (acct->file && acct->file->f_path.mnt->mnt_sb == sb) {
+			acct_file_reopen(acct, NULL, NULL);
+			goto restart;
+		}
+	spin_unlock(&acct_lock);
+}
+
+void acct_exit_ns(struct pid_namespace *ns)
+{
+	struct bsd_acct_struct *acct;
+
+	spin_lock(&acct_lock);
+	acct = ns->bacct;
+	if (acct != NULL) {
+		if (acct->file != NULL)
+			acct_file_reopen(acct, NULL, NULL);
+
+		kfree(acct);
 	}
-	spin_unlock(&acct_globals.lock);
+	spin_unlock(&acct_lock);
 }
 
 /*
@@ -425,7 +478,8 @@ static u32 encode_float(u64 value)
 /*
  *  do_acct_process does all actual work. Caller holds the reference to file.
  */
-static void do_acct_process(struct pid_namespace *ns, struct file *file)
+static void do_acct_process(struct bsd_acct_struct *acct,
+		struct pid_namespace *ns, struct file *file)
 {
 	struct pacct_struct *pacct = &current->signal->pacct;
 	acct_t ac;
@@ -440,7 +494,7 @@ static void do_acct_process(struct pid_namespace *ns, struct file *file)
 	 * First check to see if there is enough free_space to continue
 	 * the process accounting system.
 	 */
-	if (!check_free_space(file))
+	if (!check_free_space(acct, file))
 		return;
 
 	/*
@@ -577,34 +631,46 @@ void acct_collect(long exitcode, int group_dead)
 	spin_unlock_irq(&current->sighand->siglock);
 }
 
-/**
- * acct_process - now just a wrapper around do_acct_process
- * @exitcode: task exit code
- *
- * handles process accounting for an exiting task
- */
-void acct_process(void)
+static void acct_process_in_ns(struct pid_namespace *ns)
 {
 	struct file *file = NULL;
-	struct pid_namespace *ns;
+	struct bsd_acct_struct *acct;
 
+	acct = ns->bacct;
 	/*
 	 * accelerate the common fastpath:
 	 */
-	if (!acct_globals.file)
+	if (!acct || !acct->file)
 		return;
 
-	spin_lock(&acct_globals.lock);
-	file = acct_globals.file;
+	spin_lock(&acct_lock);
+	file = acct->file;
 	if (unlikely(!file)) {
-		spin_unlock(&acct_globals.lock);
+		spin_unlock(&acct_lock);
 		return;
 	}
 	get_file(file);
-	ns = get_pid_ns(acct_globals.ns);
-	spin_unlock(&acct_globals.lock);
+	spin_unlock(&acct_lock);
 
-	do_acct_process(ns, file);
+	do_acct_process(acct, ns, file);
 	fput(file);
-	put_pid_ns(ns);
+}
+
+/**
+ * acct_process - now just a wrapper around acct_process_in_ns,
+ * which in turn is a wrapper around do_acct_process.
+ *
+ * handles process accounting for an exiting task
+ */
+void acct_process(void)
+{
+	struct pid_namespace *ns;
+
+	/*
+	 * This loop is safe lockless, since current is still
+	 * alive and holds its namespace, which in turn holds
+	 * its parent.
+	 */
+	for (ns = task_active_pid_ns(current); ns != NULL; ns = ns->parent)
+		acct_process_in_ns(ns);
 }
diff --git a/kernel/audit.c b/kernel/audit.c
index e092f1c0ce30..4414e93d8750 100644
--- a/kernel/audit.c
+++ b/kernel/audit.c
@@ -707,12 +707,14 @@ static int audit_receive_msg(struct sk_buff *skb, struct nlmsghdr *nlh)
 		if (status_get->mask & AUDIT_STATUS_ENABLED) {
 			err = audit_set_enabled(status_get->enabled,
 						loginuid, sessionid, sid);
-			if (err < 0) return err;
+			if (err < 0)
+				return err;
 		}
 		if (status_get->mask & AUDIT_STATUS_FAILURE) {
 			err = audit_set_failure(status_get->failure,
 						loginuid, sessionid, sid);
-			if (err < 0) return err;
+			if (err < 0)
+				return err;
 		}
 		if (status_get->mask & AUDIT_STATUS_PID) {
 			int new_pid = status_get->pid;
@@ -725,9 +727,12 @@ static int audit_receive_msg(struct sk_buff *skb, struct nlmsghdr *nlh)
 			audit_pid = new_pid;
 			audit_nlk_pid = NETLINK_CB(skb).pid;
 		}
-		if (status_get->mask & AUDIT_STATUS_RATE_LIMIT)
+		if (status_get->mask & AUDIT_STATUS_RATE_LIMIT) {
 			err = audit_set_rate_limit(status_get->rate_limit,
 						   loginuid, sessionid, sid);
+			if (err < 0)
+				return err;
+		}
 		if (status_get->mask & AUDIT_STATUS_BACKLOG_LIMIT)
 			err = audit_set_backlog_limit(status_get->backlog_limit,
 						      loginuid, sessionid, sid);
@@ -1366,7 +1371,7 @@ int audit_string_contains_control(const char *string, size_t len)
 {
 	const unsigned char *p;
 	for (p = string; p < (const unsigned char *)string + len && *p; p++) {
-		if (*p == '"' || *p < 0x21 || *p > 0x7f)
+		if (*p == '"' || *p < 0x21 || *p > 0x7e)
 			return 1;
 	}
 	return 0;
diff --git a/kernel/auditfilter.c b/kernel/auditfilter.c
index 98c50cc671bb..b7d354e2b0ef 100644
--- a/kernel/auditfilter.c
+++ b/kernel/auditfilter.c
@@ -1022,8 +1022,11 @@ static void audit_update_watch(struct audit_parent *parent,
 			struct audit_buffer *ab;
 			ab = audit_log_start(NULL, GFP_KERNEL,
 				AUDIT_CONFIG_CHANGE);
+			audit_log_format(ab, "auid=%u ses=%u",
+				audit_get_loginuid(current),
+				audit_get_sessionid(current));
 			audit_log_format(ab,
-				"op=updated rules specifying path=");
+				" op=updated rules specifying path=");
 			audit_log_untrustedstring(ab, owatch->path);
 			audit_log_format(ab, " with dev=%u ino=%lu\n",
 				 dev, ino);
@@ -1058,7 +1061,10 @@ static void audit_remove_parent_watches(struct audit_parent *parent)
 				struct audit_buffer *ab;
 				ab = audit_log_start(NULL, GFP_KERNEL,
 					AUDIT_CONFIG_CHANGE);
-				audit_log_format(ab, "op=remove rule path=");
+				audit_log_format(ab, "auid=%u ses=%u",
+					audit_get_loginuid(current),
+					audit_get_sessionid(current));
+				audit_log_format(ab, " op=remove rule path=");
 				audit_log_untrustedstring(ab, w->path);
 				if (r->filterkey) {
 					audit_log_format(ab, " key=");
diff --git a/kernel/auditsc.c b/kernel/auditsc.c
index 4699950e65bd..59cedfb040e7 100644
--- a/kernel/auditsc.c
+++ b/kernel/auditsc.c
@@ -243,7 +243,11 @@ static inline int open_arg(int flags, int mask)
 
 static int audit_match_perm(struct audit_context *ctx, int mask)
 {
-	unsigned n = ctx->major;
+	unsigned n;
+	if (unlikely(!ctx))
+		return 0;
+
+	n = ctx->major;
 	switch (audit_classify_syscall(ctx->arch, n)) {
 	case 0:	/* native */
 		if ((mask & AUDIT_PERM_WRITE) &&
@@ -284,6 +288,10 @@ static int audit_match_filetype(struct audit_context *ctx, int which)
 {
 	unsigned index = which & ~S_IFMT;
 	mode_t mode = which & S_IFMT;
+
+	if (unlikely(!ctx))
+		return 0;
+
 	if (index >= ctx->name_count)
 		return 0;
 	if (ctx->names[index].ino == -1)
@@ -610,7 +618,7 @@ static int audit_filter_rules(struct task_struct *tsk,
 		if (!result)
 			return 0;
 	}
-	if (rule->filterkey)
+	if (rule->filterkey && ctx)
 		ctx->filterkey = kstrdup(rule->filterkey, GFP_ATOMIC);
 	switch (rule->action) {
 	case AUDIT_NEVER:    *state = AUDIT_DISABLED;	    break;
@@ -2375,7 +2383,7 @@ int __audit_signal_info(int sig, struct task_struct *t)
 	struct audit_context *ctx = tsk->audit_context;
 
 	if (audit_pid && t->tgid == audit_pid) {
-		if (sig == SIGTERM || sig == SIGHUP || sig == SIGUSR1) {
+		if (sig == SIGTERM || sig == SIGHUP || sig == SIGUSR1 || sig == SIGUSR2) {
 			audit_sig_pid = tsk->pid;
 			if (tsk->loginuid != -1)
 				audit_sig_uid = tsk->loginuid;
diff --git a/kernel/capability.c b/kernel/capability.c
index 0101e847603e..33e51e78c2d8 100644
--- a/kernel/capability.c
+++ b/kernel/capability.c
@@ -486,17 +486,22 @@ asmlinkage long sys_capset(cap_user_header_t header, const cap_user_data_t data)
 	return ret;
 }
 
-int __capable(struct task_struct *t, int cap)
+/**
+ * capable - Determine if the current task has a superior capability in effect
+ * @cap: The capability to be tested for
+ *
+ * Return true if the current task has the given superior capability currently
+ * available for use, false if not.
+ *
+ * This sets PF_SUPERPRIV on the task if the capability is available on the
+ * assumption that it's about to be used.
+ */
+int capable(int cap)
 {
-	if (security_capable(t, cap) == 0) {
-		t->flags |= PF_SUPERPRIV;
+	if (has_capability(current, cap)) {
+		current->flags |= PF_SUPERPRIV;
 		return 1;
 	}
 	return 0;
 }
-
-int capable(int cap)
-{
-	return __capable(current, cap);
-}
 EXPORT_SYMBOL(capable);
diff --git a/kernel/cgroup.c b/kernel/cgroup.c
index 15ac0e1e4f4d..13932abde159 100644
--- a/kernel/cgroup.c
+++ b/kernel/cgroup.c
@@ -45,6 +45,7 @@
 #include <linux/delayacct.h>
 #include <linux/cgroupstats.h>
 #include <linux/hash.h>
+#include <linux/namei.h>
 
 #include <asm/atomic.h>
 
@@ -89,11 +90,7 @@ struct cgroupfs_root {
 	/* Hierarchy-specific flags */
 	unsigned long flags;
 
-	/* The path to use for release notifications. No locking
-	 * between setting and use - so if userspace updates this
-	 * while child cgroups exist, you could miss a
-	 * notification. We ensure that it's always a valid
-	 * NUL-terminated string */
+	/* The path to use for release notifications. */
 	char release_agent_path[PATH_MAX];
 };
 
@@ -118,7 +115,7 @@ static int root_count;
  * extra work in the fork/exit path if none of the subsystems need to
  * be called.
  */
-static int need_forkexit_callback;
+static int need_forkexit_callback __read_mostly;
 static int need_mm_owner_callback __read_mostly;
 
 /* convenient tests for these bits */
@@ -220,7 +217,7 @@ static struct hlist_head *css_set_hash(struct cgroup_subsys_state *css[])
  * task until after the first call to cgroup_iter_start(). This
  * reduces the fork()/exit() overhead for people who have cgroups
  * compiled into their kernel but not actually in use */
-static int use_task_css_set_links;
+static int use_task_css_set_links __read_mostly;
 
 /* When we create or destroy a css_set, the operation simply
  * takes/releases a reference count on all the cgroups referenced
@@ -241,17 +238,20 @@ static int use_task_css_set_links;
  */
 static void unlink_css_set(struct css_set *cg)
 {
+	struct cg_cgroup_link *link;
+	struct cg_cgroup_link *saved_link;
+
 	write_lock(&css_set_lock);
 	hlist_del(&cg->hlist);
 	css_set_count--;
-	while (!list_empty(&cg->cg_links)) {
-		struct cg_cgroup_link *link;
-		link = list_entry(cg->cg_links.next,
-				  struct cg_cgroup_link, cg_link_list);
+
+	list_for_each_entry_safe(link, saved_link, &cg->cg_links,
+				 cg_link_list) {
 		list_del(&link->cg_link_list);
 		list_del(&link->cgrp_link_list);
 		kfree(link);
 	}
+
 	write_unlock(&css_set_lock);
 }
 
@@ -355,6 +355,17 @@ static struct css_set *find_existing_css_set(
 	return NULL;
 }
 
+static void free_cg_links(struct list_head *tmp)
+{
+	struct cg_cgroup_link *link;
+	struct cg_cgroup_link *saved_link;
+
+	list_for_each_entry_safe(link, saved_link, tmp, cgrp_link_list) {
+		list_del(&link->cgrp_link_list);
+		kfree(link);
+	}
+}
+
 /*
  * allocate_cg_links() allocates "count" cg_cgroup_link structures
  * and chains them on tmp through their cgrp_link_list fields. Returns 0 on
@@ -368,13 +379,7 @@ static int allocate_cg_links(int count, struct list_head *tmp)
 	for (i = 0; i < count; i++) {
 		link = kmalloc(sizeof(*link), GFP_KERNEL);
 		if (!link) {
-			while (!list_empty(tmp)) {
-				link = list_entry(tmp->next,
-						  struct cg_cgroup_link,
-						  cgrp_link_list);
-				list_del(&link->cgrp_link_list);
-				kfree(link);
-			}
+			free_cg_links(tmp);
 			return -ENOMEM;
 		}
 		list_add(&link->cgrp_link_list, tmp);
@@ -382,18 +387,6 @@ static int allocate_cg_links(int count, struct list_head *tmp)
 	return 0;
 }
 
-static void free_cg_links(struct list_head *tmp)
-{
-	while (!list_empty(tmp)) {
-		struct cg_cgroup_link *link;
-		link = list_entry(tmp->next,
-				  struct cg_cgroup_link,
-				  cgrp_link_list);
-		list_del(&link->cgrp_link_list);
-		kfree(link);
-	}
-}
-
 /*
  * find_css_set() takes an existing cgroup group and a
  * cgroup object, and returns a css_set object that's
@@ -415,11 +408,11 @@ static struct css_set *find_css_set(
 
 	/* First see if we already have a cgroup group that matches
 	 * the desired set */
-	write_lock(&css_set_lock);
+	read_lock(&css_set_lock);
 	res = find_existing_css_set(oldcg, cgrp, template);
 	if (res)
 		get_css_set(res);
-	write_unlock(&css_set_lock);
+	read_unlock(&css_set_lock);
 
 	if (res)
 		return res;
@@ -507,10 +500,6 @@ static struct css_set *find_css_set(
  * knows that the cgroup won't be removed, as cgroup_rmdir()
  * needs that mutex.
  *
- * The cgroup_common_file_write handler for operations that modify
- * the cgroup hierarchy holds cgroup_mutex across the entire operation,
- * single threading all such cgroup modifications across the system.
- *
  * The fork and exit callbacks cgroup_fork() and cgroup_exit(), don't
  * (usually) take cgroup_mutex.  These are the two most performance
  * critical pieces of code here.  The exception occurs on cgroup_exit(),
@@ -962,7 +951,6 @@ static int cgroup_get_sb(struct file_system_type *fs_type,
 	struct super_block *sb;
 	struct cgroupfs_root *root;
 	struct list_head tmp_cg_links;
-	INIT_LIST_HEAD(&tmp_cg_links);
 
 	/* First find the desired set of subsystems */
 	ret = parse_cgroupfs_options(data, &opts);
@@ -1093,6 +1081,8 @@ static void cgroup_kill_sb(struct super_block *sb) {
 	struct cgroupfs_root *root = sb->s_fs_info;
 	struct cgroup *cgrp = &root->top_cgroup;
 	int ret;
+	struct cg_cgroup_link *link;
+	struct cg_cgroup_link *saved_link;
 
 	BUG_ON(!root);
 
@@ -1112,10 +1102,9 @@ static void cgroup_kill_sb(struct super_block *sb) {
 	 * root cgroup
 	 */
 	write_lock(&css_set_lock);
-	while (!list_empty(&cgrp->css_sets)) {
-		struct cg_cgroup_link *link;
-		link = list_entry(cgrp->css_sets.next,
-				  struct cg_cgroup_link, cgrp_link_list);
+
+	list_for_each_entry_safe(link, saved_link, &cgrp->css_sets,
+				 cgrp_link_list) {
 		list_del(&link->cg_link_list);
 		list_del(&link->cgrp_link_list);
 		kfree(link);
@@ -1281,18 +1270,14 @@ int cgroup_attach_task(struct cgroup *cgrp, struct task_struct *tsk)
 }
 
 /*
- * Attach task with pid 'pid' to cgroup 'cgrp'. Call with
- * cgroup_mutex, may take task_lock of task
+ * Attach task with pid 'pid' to cgroup 'cgrp'. Call with cgroup_mutex
+ * held. May take task_lock of task
  */
-static int attach_task_by_pid(struct cgroup *cgrp, char *pidbuf)
+static int attach_task_by_pid(struct cgroup *cgrp, u64 pid)
 {
-	pid_t pid;
 	struct task_struct *tsk;
 	int ret;
 
-	if (sscanf(pidbuf, "%d", &pid) != 1)
-		return -EIO;
-
 	if (pid) {
 		rcu_read_lock();
 		tsk = find_task_by_vpid(pid);
@@ -1318,6 +1303,16 @@ static int attach_task_by_pid(struct cgroup *cgrp, char *pidbuf)
 	return ret;
 }
 
+static int cgroup_tasks_write(struct cgroup *cgrp, struct cftype *cft, u64 pid)
+{
+	int ret;
+	if (!cgroup_lock_live_group(cgrp))
+		return -ENODEV;
+	ret = attach_task_by_pid(cgrp, pid);
+	cgroup_unlock();
+	return ret;
+}
+
 /* The various types of files and directories in a cgroup file system */
 enum cgroup_filetype {
 	FILE_ROOT,
@@ -1327,12 +1322,54 @@ enum cgroup_filetype {
 	FILE_RELEASE_AGENT,
 };
 
+/**
+ * cgroup_lock_live_group - take cgroup_mutex and check that cgrp is alive.
+ * @cgrp: the cgroup to be checked for liveness
+ *
+ * On success, returns true; the lock should be later released with
+ * cgroup_unlock(). On failure returns false with no lock held.
+ */
+bool cgroup_lock_live_group(struct cgroup *cgrp)
+{
+	mutex_lock(&cgroup_mutex);
+	if (cgroup_is_removed(cgrp)) {
+		mutex_unlock(&cgroup_mutex);
+		return false;
+	}
+	return true;
+}
+
+static int cgroup_release_agent_write(struct cgroup *cgrp, struct cftype *cft,
+				      const char *buffer)
+{
+	BUILD_BUG_ON(sizeof(cgrp->root->release_agent_path) < PATH_MAX);
+	if (!cgroup_lock_live_group(cgrp))
+		return -ENODEV;
+	strcpy(cgrp->root->release_agent_path, buffer);
+	cgroup_unlock();
+	return 0;
+}
+
+static int cgroup_release_agent_show(struct cgroup *cgrp, struct cftype *cft,
+				     struct seq_file *seq)
+{
+	if (!cgroup_lock_live_group(cgrp))
+		return -ENODEV;
+	seq_puts(seq, cgrp->root->release_agent_path);
+	seq_putc(seq, '\n');
+	cgroup_unlock();
+	return 0;
+}
+
+/* A buffer size big enough for numbers or short strings */
+#define CGROUP_LOCAL_BUFFER_SIZE 64
+
 static ssize_t cgroup_write_X64(struct cgroup *cgrp, struct cftype *cft,
 				struct file *file,
 				const char __user *userbuf,
 				size_t nbytes, loff_t *unused_ppos)
 {
-	char buffer[64];
+	char buffer[CGROUP_LOCAL_BUFFER_SIZE];
 	int retval = 0;
 	char *end;
 
@@ -1361,68 +1398,39 @@ static ssize_t cgroup_write_X64(struct cgroup *cgrp, struct cftype *cft,
 	return retval;
 }
 
-static ssize_t cgroup_common_file_write(struct cgroup *cgrp,
-					   struct cftype *cft,
-					   struct file *file,
-					   const char __user *userbuf,
-					   size_t nbytes, loff_t *unused_ppos)
+static ssize_t cgroup_write_string(struct cgroup *cgrp, struct cftype *cft,
+				   struct file *file,
+				   const char __user *userbuf,
+				   size_t nbytes, loff_t *unused_ppos)
 {
-	enum cgroup_filetype type = cft->private;
-	char *buffer;
+	char local_buffer[CGROUP_LOCAL_BUFFER_SIZE];
 	int retval = 0;
+	size_t max_bytes = cft->max_write_len;
+	char *buffer = local_buffer;
 
-	if (nbytes >= PATH_MAX)
+	if (!max_bytes)
+		max_bytes = sizeof(local_buffer) - 1;
+	if (nbytes >= max_bytes)
 		return -E2BIG;
-
-	/* +1 for nul-terminator */
-	buffer = kmalloc(nbytes + 1, GFP_KERNEL);
-	if (buffer == NULL)
-		return -ENOMEM;
-
-	if (copy_from_user(buffer, userbuf, nbytes)) {
+	/* Allocate a dynamic buffer if we need one */
+	if (nbytes >= sizeof(local_buffer)) {
+		buffer = kmalloc(nbytes + 1, GFP_KERNEL);
+		if (buffer == NULL)
+			return -ENOMEM;
+	}
+	if (nbytes && copy_from_user(buffer, userbuf, nbytes)) {
 		retval = -EFAULT;
-		goto out1;
+		goto out;
 	}
-	buffer[nbytes] = 0;	/* nul-terminate */
-	strstrip(buffer);	/* strip -just- trailing whitespace */
 
-	mutex_lock(&cgroup_mutex);
-
-	/*
-	 * This was already checked for in cgroup_file_write(), but
-	 * check again now we're holding cgroup_mutex.
-	 */
-	if (cgroup_is_removed(cgrp)) {
-		retval = -ENODEV;
-		goto out2;
-	}
-
-	switch (type) {
-	case FILE_TASKLIST:
-		retval = attach_task_by_pid(cgrp, buffer);
-		break;
-	case FILE_NOTIFY_ON_RELEASE:
-		clear_bit(CGRP_RELEASABLE, &cgrp->flags);
-		if (simple_strtoul(buffer, NULL, 10) != 0)
-			set_bit(CGRP_NOTIFY_ON_RELEASE, &cgrp->flags);
-		else
-			clear_bit(CGRP_NOTIFY_ON_RELEASE, &cgrp->flags);
-		break;
-	case FILE_RELEASE_AGENT:
-		BUILD_BUG_ON(sizeof(cgrp->root->release_agent_path) < PATH_MAX);
-		strcpy(cgrp->root->release_agent_path, buffer);
-		break;
-	default:
-		retval = -EINVAL;
-		goto out2;
-	}
-
-	if (retval == 0)
+	buffer[nbytes] = 0;     /* nul-terminate */
+	strstrip(buffer);
+	retval = cft->write_string(cgrp, cft, buffer);
+	if (!retval)
 		retval = nbytes;
-out2:
-	mutex_unlock(&cgroup_mutex);
-out1:
-	kfree(buffer);
+out:
+	if (buffer != local_buffer)
+		kfree(buffer);
 	return retval;
 }
 
@@ -1438,6 +1446,8 @@ static ssize_t cgroup_file_write(struct file *file, const char __user *buf,
 		return cft->write(cgrp, cft, file, buf, nbytes, ppos);
 	if (cft->write_u64 || cft->write_s64)
 		return cgroup_write_X64(cgrp, cft, file, buf, nbytes, ppos);
+	if (cft->write_string)
+		return cgroup_write_string(cgrp, cft, file, buf, nbytes, ppos);
 	if (cft->trigger) {
 		int ret = cft->trigger(cgrp, (unsigned int)cft->private);
 		return ret ? ret : nbytes;
@@ -1450,7 +1460,7 @@ static ssize_t cgroup_read_u64(struct cgroup *cgrp, struct cftype *cft,
 			       char __user *buf, size_t nbytes,
 			       loff_t *ppos)
 {
-	char tmp[64];
+	char tmp[CGROUP_LOCAL_BUFFER_SIZE];
 	u64 val = cft->read_u64(cgrp, cft);
 	int len = sprintf(tmp, "%llu\n", (unsigned long long) val);
 
@@ -1462,56 +1472,13 @@ static ssize_t cgroup_read_s64(struct cgroup *cgrp, struct cftype *cft,
 			       char __user *buf, size_t nbytes,
 			       loff_t *ppos)
 {
-	char tmp[64];
+	char tmp[CGROUP_LOCAL_BUFFER_SIZE];
 	s64 val = cft->read_s64(cgrp, cft);
 	int len = sprintf(tmp, "%lld\n", (long long) val);
 
 	return simple_read_from_buffer(buf, nbytes, ppos, tmp, len);
 }
 
-static ssize_t cgroup_common_file_read(struct cgroup *cgrp,
-					  struct cftype *cft,
-					  struct file *file,
-					  char __user *buf,
-					  size_t nbytes, loff_t *ppos)
-{
-	enum cgroup_filetype type = cft->private;
-	char *page;
-	ssize_t retval = 0;
-	char *s;
-
-	if (!(page = (char *)__get_free_page(GFP_KERNEL)))
-		return -ENOMEM;
-
-	s = page;
-
-	switch (type) {
-	case FILE_RELEASE_AGENT:
-	{
-		struct cgroupfs_root *root;
-		size_t n;
-		mutex_lock(&cgroup_mutex);
-		root = cgrp->root;
-		n = strnlen(root->release_agent_path,
-			    sizeof(root->release_agent_path));
-		n = min(n, (size_t) PAGE_SIZE);
-		strncpy(s, root->release_agent_path, n);
-		mutex_unlock(&cgroup_mutex);
-		s += n;
-		break;
-	}
-	default:
-		retval = -EINVAL;
-		goto out;
-	}
-	*s++ = '\n';
-
-	retval = simple_read_from_buffer(buf, nbytes, ppos, page, s - page);
-out:
-	free_page((unsigned long)page);
-	return retval;
-}
-
 static ssize_t cgroup_file_read(struct file *file, char __user *buf,
 				   size_t nbytes, loff_t *ppos)
 {
@@ -1560,7 +1527,7 @@ static int cgroup_seqfile_show(struct seq_file *m, void *arg)
 	return cft->read_seq_string(state->cgroup, cft, m);
 }
 
-int cgroup_seqfile_release(struct inode *inode, struct file *file)
+static int cgroup_seqfile_release(struct inode *inode, struct file *file)
 {
 	struct seq_file *seq = file->private_data;
 	kfree(seq->private);
@@ -1569,6 +1536,7 @@ int cgroup_seqfile_release(struct inode *inode, struct file *file)
 
 static struct file_operations cgroup_seqfile_operations = {
 	.read = seq_read,
+	.write = cgroup_file_write,
 	.llseek = seq_lseek,
 	.release = cgroup_seqfile_release,
 };
@@ -1756,15 +1724,11 @@ int cgroup_add_files(struct cgroup *cgrp,
 int cgroup_task_count(const struct cgroup *cgrp)
 {
 	int count = 0;
-	struct list_head *l;
+	struct cg_cgroup_link *link;
 
 	read_lock(&css_set_lock);
-	l = cgrp->css_sets.next;
-	while (l != &cgrp->css_sets) {
-		struct cg_cgroup_link *link =
-			list_entry(l, struct cg_cgroup_link, cgrp_link_list);
+	list_for_each_entry(link, &cgrp->css_sets, cgrp_link_list) {
 		count += atomic_read(&link->cg->ref.refcount);
-		l = l->next;
 	}
 	read_unlock(&css_set_lock);
 	return count;
@@ -2227,6 +2191,18 @@ static u64 cgroup_read_notify_on_release(struct cgroup *cgrp,
 	return notify_on_release(cgrp);
 }
 
+static int cgroup_write_notify_on_release(struct cgroup *cgrp,
+					  struct cftype *cft,
+					  u64 val)
+{
+	clear_bit(CGRP_RELEASABLE, &cgrp->flags);
+	if (val)
+		set_bit(CGRP_NOTIFY_ON_RELEASE, &cgrp->flags);
+	else
+		clear_bit(CGRP_NOTIFY_ON_RELEASE, &cgrp->flags);
+	return 0;
+}
+
 /*
  * for the common functions, 'private' gives the type of file
  */
@@ -2235,7 +2211,7 @@ static struct cftype files[] = {
 		.name = "tasks",
 		.open = cgroup_tasks_open,
 		.read = cgroup_tasks_read,
-		.write = cgroup_common_file_write,
+		.write_u64 = cgroup_tasks_write,
 		.release = cgroup_tasks_release,
 		.private = FILE_TASKLIST,
 	},
@@ -2243,15 +2219,16 @@ static struct cftype files[] = {
 	{
 		.name = "notify_on_release",
 		.read_u64 = cgroup_read_notify_on_release,
-		.write = cgroup_common_file_write,
+		.write_u64 = cgroup_write_notify_on_release,
 		.private = FILE_NOTIFY_ON_RELEASE,
 	},
 };
 
 static struct cftype cft_release_agent = {
 	.name = "release_agent",
-	.read = cgroup_common_file_read,
-	.write = cgroup_common_file_write,
+	.read_seq_string = cgroup_release_agent_show,
+	.write_string = cgroup_release_agent_write,
+	.max_write_len = PATH_MAX,
 	.private = FILE_RELEASE_AGENT,
 };
 
@@ -2391,7 +2368,7 @@ static int cgroup_mkdir(struct inode *dir, struct dentry *dentry, int mode)
 	return cgroup_create(c_parent, dentry, mode | S_IFDIR);
 }
 
-static inline int cgroup_has_css_refs(struct cgroup *cgrp)
+static int cgroup_has_css_refs(struct cgroup *cgrp)
 {
 	/* Check the reference count on each subsystem. Since we
 	 * already established that there are no tasks in the
@@ -2869,16 +2846,17 @@ void cgroup_exit(struct task_struct *tsk, int run_callbacks)
  * cgroup_clone - clone the cgroup the given subsystem is attached to
  * @tsk: the task to be moved
  * @subsys: the given subsystem
+ * @nodename: the name for the new cgroup
  *
  * Duplicate the current cgroup in the hierarchy that the given
  * subsystem is attached to, and move this task into the new
  * child.
  */
-int cgroup_clone(struct task_struct *tsk, struct cgroup_subsys *subsys)
+int cgroup_clone(struct task_struct *tsk, struct cgroup_subsys *subsys,
+							char *nodename)
 {
 	struct dentry *dentry;
 	int ret = 0;
-	char nodename[MAX_CGROUP_TYPE_NAMELEN];
 	struct cgroup *parent, *child;
 	struct inode *inode;
 	struct css_set *cg;
@@ -2903,8 +2881,6 @@ int cgroup_clone(struct task_struct *tsk, struct cgroup_subsys *subsys)
 	cg = tsk->cgroups;
 	parent = task_cgroup(tsk, subsys->subsys_id);
 
-	snprintf(nodename, MAX_CGROUP_TYPE_NAMELEN, "%d", tsk->pid);
-
 	/* Pin the hierarchy */
 	atomic_inc(&parent->root->sb->s_active);
 
@@ -3078,27 +3054,24 @@ static void cgroup_release_agent(struct work_struct *work)
 	while (!list_empty(&release_list)) {
 		char *argv[3], *envp[3];
 		int i;
-		char *pathbuf;
+		char *pathbuf = NULL, *agentbuf = NULL;
 		struct cgroup *cgrp = list_entry(release_list.next,
 						    struct cgroup,
 						    release_list);
 		list_del_init(&cgrp->release_list);
 		spin_unlock(&release_list_lock);
 		pathbuf = kmalloc(PAGE_SIZE, GFP_KERNEL);
-		if (!pathbuf) {
-			spin_lock(&release_list_lock);
-			continue;
-		}
-
-		if (cgroup_path(cgrp, pathbuf, PAGE_SIZE) < 0) {
-			kfree(pathbuf);
-			spin_lock(&release_list_lock);
-			continue;
-		}
+		if (!pathbuf)
+			goto continue_free;
+		if (cgroup_path(cgrp, pathbuf, PAGE_SIZE) < 0)
+			goto continue_free;
+		agentbuf = kstrdup(cgrp->root->release_agent_path, GFP_KERNEL);
+		if (!agentbuf)
+			goto continue_free;
 
 		i = 0;
-		argv[i++] = cgrp->root->release_agent_path;
-		argv[i++] = (char *)pathbuf;
+		argv[i++] = agentbuf;
+		argv[i++] = pathbuf;
 		argv[i] = NULL;
 
 		i = 0;
@@ -3112,8 +3085,10 @@ static void cgroup_release_agent(struct work_struct *work)
 		 * be a slow process */
 		mutex_unlock(&cgroup_mutex);
 		call_usermodehelper(argv[0], argv, envp, UMH_WAIT_EXEC);
-		kfree(pathbuf);
 		mutex_lock(&cgroup_mutex);
+ continue_free:
+		kfree(pathbuf);
+		kfree(agentbuf);
 		spin_lock(&release_list_lock);
 	}
 	spin_unlock(&release_list_lock);
diff --git a/kernel/cpu.c b/kernel/cpu.c
index 2cc409ce0a8f..f17e9854c246 100644
--- a/kernel/cpu.c
+++ b/kernel/cpu.c
@@ -216,7 +216,6 @@ static int __ref take_cpu_down(void *_param)
 static int __ref _cpu_down(unsigned int cpu, int tasks_frozen)
 {
 	int err, nr_calls = 0;
-	struct task_struct *p;
 	cpumask_t old_allowed, tmp;
 	void *hcpu = (void *)(long)cpu;
 	unsigned long mod = tasks_frozen ? CPU_TASKS_FROZEN : 0;
@@ -249,21 +248,18 @@ static int __ref _cpu_down(unsigned int cpu, int tasks_frozen)
 	cpus_setall(tmp);
 	cpu_clear(cpu, tmp);
 	set_cpus_allowed_ptr(current, &tmp);
+	tmp = cpumask_of_cpu(cpu);
 
-	p = __stop_machine_run(take_cpu_down, &tcd_param, cpu);
-
-	if (IS_ERR(p) || cpu_online(cpu)) {
+	err = __stop_machine(take_cpu_down, &tcd_param, &tmp);
+	if (err) {
 		/* CPU didn't die: tell everyone.  Can't complain. */
 		if (raw_notifier_call_chain(&cpu_chain, CPU_DOWN_FAILED | mod,
 					    hcpu) == NOTIFY_BAD)
 			BUG();
 
-		if (IS_ERR(p)) {
-			err = PTR_ERR(p);
-			goto out_allowed;
-		}
-		goto out_thread;
+		goto out_allowed;
 	}
+	BUG_ON(cpu_online(cpu));
 
 	/* Wait for it to sleep (leaving idle task). */
 	while (!idle_cpu(cpu))
@@ -279,12 +275,15 @@ static int __ref _cpu_down(unsigned int cpu, int tasks_frozen)
 
 	check_for_tasks(cpu);
 
-out_thread:
-	err = kthread_stop(p);
 out_allowed:
 	set_cpus_allowed_ptr(current, &old_allowed);
 out_release:
 	cpu_hotplug_done();
+	if (!err) {
+		if (raw_notifier_call_chain(&cpu_chain, CPU_POST_DEAD | mod,
+					    hcpu) == NOTIFY_BAD)
+			BUG();
+	}
 	return err;
 }
 
@@ -350,6 +349,8 @@ static int __cpuinit _cpu_up(unsigned int cpu, int tasks_frozen)
 		goto out_notify;
 	BUG_ON(!cpu_online(cpu));
 
+	cpu_set(cpu, cpu_active_map);
+
 	/* Now call notifier in preparation. */
 	raw_notifier_call_chain(&cpu_chain, CPU_ONLINE | mod, hcpu);
 
@@ -368,7 +369,7 @@ int __cpuinit cpu_up(unsigned int cpu)
 	if (!cpu_isset(cpu, cpu_possible_map)) {
 		printk(KERN_ERR "can't online cpu %d because it is not "
 			"configured as may-hotadd at boot time\n", cpu);
-#if defined(CONFIG_IA64) || defined(CONFIG_X86_64) || defined(CONFIG_S390)
+#if defined(CONFIG_IA64) || defined(CONFIG_X86_64)
 		printk(KERN_ERR "please check additional_cpus= boot "
 				"parameter\n");
 #endif
@@ -384,9 +385,6 @@ int __cpuinit cpu_up(unsigned int cpu)
 
 	err = _cpu_up(cpu, 0);
 
-	if (cpu_online(cpu))
-		cpu_set(cpu, cpu_active_map);
-
 out:
 	cpu_maps_update_done();
 	return err;
@@ -456,3 +454,28 @@ out:
 #endif /* CONFIG_PM_SLEEP_SMP */
 
 #endif /* CONFIG_SMP */
+
+/*
+ * cpu_bit_bitmap[] is a special, "compressed" data structure that
+ * represents all NR_CPUS bits binary values of 1<<nr.
+ *
+ * It is used by cpumask_of_cpu() to get a constant address to a CPU
+ * mask value that has a single bit set only.
+ */
+
+/* cpu_bit_bitmap[0] is empty - so we can back into it */
+#define MASK_DECLARE_1(x)	[x+1][0] = 1UL << (x)
+#define MASK_DECLARE_2(x)	MASK_DECLARE_1(x), MASK_DECLARE_1(x+1)
+#define MASK_DECLARE_4(x)	MASK_DECLARE_2(x), MASK_DECLARE_2(x+2)
+#define MASK_DECLARE_8(x)	MASK_DECLARE_4(x), MASK_DECLARE_4(x+4)
+
+const unsigned long cpu_bit_bitmap[BITS_PER_LONG+1][BITS_TO_LONGS(NR_CPUS)] = {
+
+	MASK_DECLARE_8(0),	MASK_DECLARE_8(8),
+	MASK_DECLARE_8(16),	MASK_DECLARE_8(24),
+#if BITS_PER_LONG > 32
+	MASK_DECLARE_8(32),	MASK_DECLARE_8(40),
+	MASK_DECLARE_8(48),	MASK_DECLARE_8(56),
+#endif
+};
+EXPORT_SYMBOL_GPL(cpu_bit_bitmap);
diff --git a/kernel/cpuset.c b/kernel/cpuset.c
index d5738910c34c..d5ab79cf516d 100644
--- a/kernel/cpuset.c
+++ b/kernel/cpuset.c
@@ -54,7 +54,6 @@
 #include <asm/uaccess.h>
 #include <asm/atomic.h>
 #include <linux/mutex.h>
-#include <linux/kfifo.h>
 #include <linux/workqueue.h>
 #include <linux/cgroup.h>
 
@@ -227,10 +226,6 @@ static struct cpuset top_cpuset = {
  * The task_struct fields mems_allowed and mems_generation may only
  * be accessed in the context of that task, so require no locks.
  *
- * The cpuset_common_file_write handler for operations that modify
- * the cpuset hierarchy holds cgroup_mutex across the entire operation,
- * single threading all such cpuset modifications across the system.
- *
  * The cpuset_common_file_read() handlers only hold callback_mutex across
  * small pieces of code, such as when reading out possibly multi-word
  * cpumasks and nodemasks.
@@ -369,7 +364,7 @@ void cpuset_update_task_memory_state(void)
 		my_cpusets_mem_gen = top_cpuset.mems_generation;
 	} else {
 		rcu_read_lock();
-		my_cpusets_mem_gen = task_cs(current)->mems_generation;
+		my_cpusets_mem_gen = task_cs(tsk)->mems_generation;
 		rcu_read_unlock();
 	}
 
@@ -490,21 +485,51 @@ static int cpusets_overlap(struct cpuset *a, struct cpuset *b)
 static void
 update_domain_attr(struct sched_domain_attr *dattr, struct cpuset *c)
 {
-	if (!dattr)
-		return;
 	if (dattr->relax_domain_level < c->relax_domain_level)
 		dattr->relax_domain_level = c->relax_domain_level;
 	return;
 }
 
+static void
+update_domain_attr_tree(struct sched_domain_attr *dattr, struct cpuset *c)
+{
+	LIST_HEAD(q);
+
+	list_add(&c->stack_list, &q);
+	while (!list_empty(&q)) {
+		struct cpuset *cp;
+		struct cgroup *cont;
+		struct cpuset *child;
+
+		cp = list_first_entry(&q, struct cpuset, stack_list);
+		list_del(q.next);
+
+		if (cpus_empty(cp->cpus_allowed))
+			continue;
+
+		if (is_sched_load_balance(cp))
+			update_domain_attr(dattr, cp);
+
+		list_for_each_entry(cont, &cp->css.cgroup->children, sibling) {
+			child = cgroup_cs(cont);
+			list_add_tail(&child->stack_list, &q);
+		}
+	}
+}
+
 /*
  * rebuild_sched_domains()
  *
- * If the flag 'sched_load_balance' of any cpuset with non-empty
- * 'cpus' changes, or if the 'cpus' allowed changes in any cpuset
- * which has that flag enabled, or if any cpuset with a non-empty
- * 'cpus' is removed, then call this routine to rebuild the
- * scheduler's dynamic sched domains.
+ * This routine will be called to rebuild the scheduler's dynamic
+ * sched domains:
+ * - if the flag 'sched_load_balance' of any cpuset with non-empty
+ *   'cpus' changes,
+ * - or if the 'cpus' allowed changes in any cpuset which has that
+ *   flag enabled,
+ * - or if the 'sched_relax_domain_level' of any cpuset which has
+ *   that flag enabled and with non-empty 'cpus' changes,
+ * - or if any cpuset with non-empty 'cpus' is removed,
+ * - or if a cpu gets offlined.
  *
  * This routine builds a partial partition of the systems CPUs
  * (the set of non-overlappping cpumask_t's in the array 'part'
@@ -531,7 +556,7 @@ update_domain_attr(struct sched_domain_attr *dattr, struct cpuset *c)
  * So the reverse nesting would risk an ABBA deadlock.
  *
  * The three key local variables below are:
- *    q  - a kfifo queue of cpuset pointers, used to implement a
+ *    q  - a linked-list queue of cpuset pointers, used to implement a
  *	   top-down scan of all cpusets.  This scan loads a pointer
  *	   to each cpuset marked is_sched_load_balance into the
  *	   array 'csa'.  For our purposes, rebuilding the schedulers
@@ -566,7 +591,7 @@ update_domain_attr(struct sched_domain_attr *dattr, struct cpuset *c)
 
 void rebuild_sched_domains(void)
 {
-	struct kfifo *q;	/* queue of cpusets to be scanned */
+	LIST_HEAD(q);		/* queue of cpusets to be scanned*/
 	struct cpuset *cp;	/* scans q */
 	struct cpuset **csa;	/* array of all cpuset ptrs */
 	int csn;		/* how many cpuset ptrs in csa so far */
@@ -576,7 +601,6 @@ void rebuild_sched_domains(void)
 	int ndoms;		/* number of sched domains in result */
 	int nslot;		/* next empty doms[] cpumask_t slot */
 
-	q = NULL;
 	csa = NULL;
 	doms = NULL;
 	dattr = NULL;
@@ -590,30 +614,42 @@ void rebuild_sched_domains(void)
 		dattr = kmalloc(sizeof(struct sched_domain_attr), GFP_KERNEL);
 		if (dattr) {
 			*dattr = SD_ATTR_INIT;
-			update_domain_attr(dattr, &top_cpuset);
+			update_domain_attr_tree(dattr, &top_cpuset);
 		}
 		*doms = top_cpuset.cpus_allowed;
 		goto rebuild;
 	}
 
-	q = kfifo_alloc(number_of_cpusets * sizeof(cp), GFP_KERNEL, NULL);
-	if (IS_ERR(q))
-		goto done;
 	csa = kmalloc(number_of_cpusets * sizeof(cp), GFP_KERNEL);
 	if (!csa)
 		goto done;
 	csn = 0;
 
-	cp = &top_cpuset;
-	__kfifo_put(q, (void *)&cp, sizeof(cp));
-	while (__kfifo_get(q, (void *)&cp, sizeof(cp))) {
+	list_add(&top_cpuset.stack_list, &q);
+	while (!list_empty(&q)) {
 		struct cgroup *cont;
 		struct cpuset *child;   /* scans child cpusets of cp */
-		if (is_sched_load_balance(cp))
+
+		cp = list_first_entry(&q, struct cpuset, stack_list);
+		list_del(q.next);
+
+		if (cpus_empty(cp->cpus_allowed))
+			continue;
+
+		/*
+		 * All child cpusets contain a subset of the parent's cpus, so
+		 * just skip them, and then we call update_domain_attr_tree()
+		 * to calc relax_domain_level of the corresponding sched
+		 * domain.
+		 */
+		if (is_sched_load_balance(cp)) {
 			csa[csn++] = cp;
+			continue;
+		}
+
 		list_for_each_entry(cont, &cp->css.cgroup->children, sibling) {
 			child = cgroup_cs(cont);
-			__kfifo_put(q, (void *)&child, sizeof(cp));
+			list_add_tail(&child->stack_list, &q);
 		}
   	}
 
@@ -680,7 +716,7 @@ restart:
 					cpus_or(*dp, *dp, b->cpus_allowed);
 					b->pn = -1;
 					if (dattr)
-						update_domain_attr(dattr
+						update_domain_attr_tree(dattr
 								   + nslot, b);
 				}
 			}
@@ -696,43 +732,11 @@ rebuild:
 	put_online_cpus();
 
 done:
-	if (q && !IS_ERR(q))
-		kfifo_free(q);
 	kfree(csa);
 	/* Don't kfree(doms) -- partition_sched_domains() does that. */
 	/* Don't kfree(dattr) -- partition_sched_domains() does that. */
 }
 
-static inline int started_after_time(struct task_struct *t1,
-				     struct timespec *time,
-				     struct task_struct *t2)
-{
-	int start_diff = timespec_compare(&t1->start_time, time);
-	if (start_diff > 0) {
-		return 1;
-	} else if (start_diff < 0) {
-		return 0;
-	} else {
-		/*
-		 * Arbitrarily, if two processes started at the same
-		 * time, we'll say that the lower pointer value
-		 * started first. Note that t2 may have exited by now
-		 * so this may not be a valid pointer any longer, but
-		 * that's fine - it still serves to distinguish
-		 * between two tasks started (effectively)
-		 * simultaneously.
-		 */
-		return t1 > t2;
-	}
-}
-
-static inline int started_after(void *p1, void *p2)
-{
-	struct task_struct *t1 = p1;
-	struct task_struct *t2 = p2;
-	return started_after_time(t1, &t2->start_time, t2);
-}
-
 /**
  * cpuset_test_cpumask - test a task's cpus_allowed versus its cpuset's
  * @tsk: task to test
@@ -768,15 +772,49 @@ static void cpuset_change_cpumask(struct task_struct *tsk,
 }
 
 /**
+ * update_tasks_cpumask - Update the cpumasks of tasks in the cpuset.
+ * @cs: the cpuset in which each task's cpus_allowed mask needs to be changed
+ *
+ * Called with cgroup_mutex held
+ *
+ * The cgroup_scan_tasks() function will scan all the tasks in a cgroup,
+ * calling callback functions for each.
+ *
+ * Return 0 if successful, -errno if not.
+ */
+static int update_tasks_cpumask(struct cpuset *cs)
+{
+	struct cgroup_scanner scan;
+	struct ptr_heap heap;
+	int retval;
+
+	/*
+	 * cgroup_scan_tasks() will initialize heap->gt for us.
+	 * heap_init() is still needed here for we should not change
+	 * cs->cpus_allowed when heap_init() fails.
+	 */
+	retval = heap_init(&heap, PAGE_SIZE, GFP_KERNEL, NULL);
+	if (retval)
+		return retval;
+
+	scan.cg = cs->css.cgroup;
+	scan.test_task = cpuset_test_cpumask;
+	scan.process_task = cpuset_change_cpumask;
+	scan.heap = &heap;
+	retval = cgroup_scan_tasks(&scan);
+
+	heap_free(&heap);
+	return retval;
+}
+
+/**
  * update_cpumask - update the cpus_allowed mask of a cpuset and all tasks in it
  * @cs: the cpuset to consider
  * @buf: buffer of cpu numbers written to this cpuset
  */
-static int update_cpumask(struct cpuset *cs, char *buf)
+static int update_cpumask(struct cpuset *cs, const char *buf)
 {
 	struct cpuset trialcs;
-	struct cgroup_scanner scan;
-	struct ptr_heap heap;
 	int retval;
 	int is_load_balanced;
 
@@ -792,7 +830,6 @@ static int update_cpumask(struct cpuset *cs, char *buf)
 	 * that parsing.  The validate_change() call ensures that cpusets
 	 * with tasks have cpus.
 	 */
-	buf = strstrip(buf);
 	if (!*buf) {
 		cpus_clear(trialcs.cpus_allowed);
 	} else {
@@ -811,10 +848,6 @@ static int update_cpumask(struct cpuset *cs, char *buf)
 	if (cpus_equal(cs->cpus_allowed, trialcs.cpus_allowed))
 		return 0;
 
-	retval = heap_init(&heap, PAGE_SIZE, GFP_KERNEL, &started_after);
-	if (retval)
-		return retval;
-
 	is_load_balanced = is_sched_load_balance(&trialcs);
 
 	mutex_lock(&callback_mutex);
@@ -825,12 +858,9 @@ static int update_cpumask(struct cpuset *cs, char *buf)
 	 * Scan tasks in the cpuset, and update the cpumasks of any
 	 * that need an update.
 	 */
-	scan.cg = cs->css.cgroup;
-	scan.test_task = cpuset_test_cpumask;
-	scan.process_task = cpuset_change_cpumask;
-	scan.heap = &heap;
-	cgroup_scan_tasks(&scan);
-	heap_free(&heap);
+	retval = update_tasks_cpumask(cs);
+	if (retval < 0)
+		return retval;
 
 	if (is_load_balanced)
 		rebuild_sched_domains();
@@ -886,74 +916,25 @@ static void cpuset_migrate_mm(struct mm_struct *mm, const nodemask_t *from,
 	mutex_unlock(&callback_mutex);
 }
 
-/*
- * Handle user request to change the 'mems' memory placement
- * of a cpuset.  Needs to validate the request, update the
- * cpusets mems_allowed and mems_generation, and for each
- * task in the cpuset, rebind any vma mempolicies and if
- * the cpuset is marked 'memory_migrate', migrate the tasks
- * pages to the new memory.
- *
- * Call with cgroup_mutex held.  May take callback_mutex during call.
- * Will take tasklist_lock, scan tasklist for tasks in cpuset cs,
- * lock each such tasks mm->mmap_sem, scan its vma's and rebind
- * their mempolicies to the cpusets new mems_allowed.
- */
-
 static void *cpuset_being_rebound;
 
-static int update_nodemask(struct cpuset *cs, char *buf)
+/**
+ * update_tasks_nodemask - Update the nodemasks of tasks in the cpuset.
+ * @cs: the cpuset in which each task's mems_allowed mask needs to be changed
+ * @oldmem: old mems_allowed of cpuset cs
+ *
+ * Called with cgroup_mutex held
+ * Return 0 if successful, -errno if not.
+ */
+static int update_tasks_nodemask(struct cpuset *cs, const nodemask_t *oldmem)
 {
-	struct cpuset trialcs;
-	nodemask_t oldmem;
 	struct task_struct *p;
 	struct mm_struct **mmarray;
 	int i, n, ntasks;
 	int migrate;
 	int fudge;
-	int retval;
 	struct cgroup_iter it;
-
-	/*
-	 * top_cpuset.mems_allowed tracks node_stats[N_HIGH_MEMORY];
-	 * it's read-only
-	 */
-	if (cs == &top_cpuset)
-		return -EACCES;
-
-	trialcs = *cs;
-
-	/*
-	 * An empty mems_allowed is ok iff there are no tasks in the cpuset.
-	 * Since nodelist_parse() fails on an empty mask, we special case
-	 * that parsing.  The validate_change() call ensures that cpusets
-	 * with tasks have memory.
-	 */
-	buf = strstrip(buf);
-	if (!*buf) {
-		nodes_clear(trialcs.mems_allowed);
-	} else {
-		retval = nodelist_parse(buf, trialcs.mems_allowed);
-		if (retval < 0)
-			goto done;
-
-		if (!nodes_subset(trialcs.mems_allowed,
-				node_states[N_HIGH_MEMORY]))
-			return -EINVAL;
-	}
-	oldmem = cs->mems_allowed;
-	if (nodes_equal(oldmem, trialcs.mems_allowed)) {
-		retval = 0;		/* Too easy - nothing to do */
-		goto done;
-	}
-	retval = validate_change(cs, &trialcs);
-	if (retval < 0)
-		goto done;
-
-	mutex_lock(&callback_mutex);
-	cs->mems_allowed = trialcs.mems_allowed;
-	cs->mems_generation = cpuset_mems_generation++;
-	mutex_unlock(&callback_mutex);
+	int retval;
 
 	cpuset_being_rebound = cs;		/* causes mpol_dup() rebind */
 
@@ -1020,7 +1001,7 @@ static int update_nodemask(struct cpuset *cs, char *buf)
 
 		mpol_rebind_mm(mm, &cs->mems_allowed);
 		if (migrate)
-			cpuset_migrate_mm(mm, &oldmem, &cs->mems_allowed);
+			cpuset_migrate_mm(mm, oldmem, &cs->mems_allowed);
 		mmput(mm);
 	}
 
@@ -1032,6 +1013,70 @@ done:
 	return retval;
 }
 
+/*
+ * Handle user request to change the 'mems' memory placement
+ * of a cpuset.  Needs to validate the request, update the
+ * cpusets mems_allowed and mems_generation, and for each
+ * task in the cpuset, rebind any vma mempolicies and if
+ * the cpuset is marked 'memory_migrate', migrate the tasks
+ * pages to the new memory.
+ *
+ * Call with cgroup_mutex held.  May take callback_mutex during call.
+ * Will take tasklist_lock, scan tasklist for tasks in cpuset cs,
+ * lock each such tasks mm->mmap_sem, scan its vma's and rebind
+ * their mempolicies to the cpusets new mems_allowed.
+ */
+static int update_nodemask(struct cpuset *cs, const char *buf)
+{
+	struct cpuset trialcs;
+	nodemask_t oldmem;
+	int retval;
+
+	/*
+	 * top_cpuset.mems_allowed tracks node_stats[N_HIGH_MEMORY];
+	 * it's read-only
+	 */
+	if (cs == &top_cpuset)
+		return -EACCES;
+
+	trialcs = *cs;
+
+	/*
+	 * An empty mems_allowed is ok iff there are no tasks in the cpuset.
+	 * Since nodelist_parse() fails on an empty mask, we special case
+	 * that parsing.  The validate_change() call ensures that cpusets
+	 * with tasks have memory.
+	 */
+	if (!*buf) {
+		nodes_clear(trialcs.mems_allowed);
+	} else {
+		retval = nodelist_parse(buf, trialcs.mems_allowed);
+		if (retval < 0)
+			goto done;
+
+		if (!nodes_subset(trialcs.mems_allowed,
+				node_states[N_HIGH_MEMORY]))
+			return -EINVAL;
+	}
+	oldmem = cs->mems_allowed;
+	if (nodes_equal(oldmem, trialcs.mems_allowed)) {
+		retval = 0;		/* Too easy - nothing to do */
+		goto done;
+	}
+	retval = validate_change(cs, &trialcs);
+	if (retval < 0)
+		goto done;
+
+	mutex_lock(&callback_mutex);
+	cs->mems_allowed = trialcs.mems_allowed;
+	cs->mems_generation = cpuset_mems_generation++;
+	mutex_unlock(&callback_mutex);
+
+	retval = update_tasks_nodemask(cs, &oldmem);
+done:
+	return retval;
+}
+
 int current_cpuset_is_being_rebound(void)
 {
 	return task_cs(current) == cpuset_being_rebound;
@@ -1044,7 +1089,8 @@ static int update_relax_domain_level(struct cpuset *cs, s64 val)
 
 	if (val != cs->relax_domain_level) {
 		cs->relax_domain_level = val;
-		rebuild_sched_domains();
+		if (!cpus_empty(cs->cpus_allowed) && is_sched_load_balance(cs))
+			rebuild_sched_domains();
 	}
 
 	return 0;
@@ -1256,72 +1302,14 @@ typedef enum {
 	FILE_SPREAD_SLAB,
 } cpuset_filetype_t;
 
-static ssize_t cpuset_common_file_write(struct cgroup *cont,
-					struct cftype *cft,
-					struct file *file,
-					const char __user *userbuf,
-					size_t nbytes, loff_t *unused_ppos)
-{
-	struct cpuset *cs = cgroup_cs(cont);
-	cpuset_filetype_t type = cft->private;
-	char *buffer;
-	int retval = 0;
-
-	/* Crude upper limit on largest legitimate cpulist user might write. */
-	if (nbytes > 100U + 6 * max(NR_CPUS, MAX_NUMNODES))
-		return -E2BIG;
-
-	/* +1 for nul-terminator */
-	buffer = kmalloc(nbytes + 1, GFP_KERNEL);
-	if (!buffer)
-		return -ENOMEM;
-
-	if (copy_from_user(buffer, userbuf, nbytes)) {
-		retval = -EFAULT;
-		goto out1;
-	}
-	buffer[nbytes] = 0;	/* nul-terminate */
-
-	cgroup_lock();
-
-	if (cgroup_is_removed(cont)) {
-		retval = -ENODEV;
-		goto out2;
-	}
-
-	switch (type) {
-	case FILE_CPULIST:
-		retval = update_cpumask(cs, buffer);
-		break;
-	case FILE_MEMLIST:
-		retval = update_nodemask(cs, buffer);
-		break;
-	default:
-		retval = -EINVAL;
-		goto out2;
-	}
-
-	if (retval == 0)
-		retval = nbytes;
-out2:
-	cgroup_unlock();
-out1:
-	kfree(buffer);
-	return retval;
-}
-
 static int cpuset_write_u64(struct cgroup *cgrp, struct cftype *cft, u64 val)
 {
 	int retval = 0;
 	struct cpuset *cs = cgroup_cs(cgrp);
 	cpuset_filetype_t type = cft->private;
 
-	cgroup_lock();
-
-	if (cgroup_is_removed(cgrp)) {
-		cgroup_unlock();
+	if (!cgroup_lock_live_group(cgrp))
 		return -ENODEV;
-	}
 
 	switch (type) {
 	case FILE_CPU_EXCLUSIVE:
@@ -1367,12 +1355,9 @@ static int cpuset_write_s64(struct cgroup *cgrp, struct cftype *cft, s64 val)
 	struct cpuset *cs = cgroup_cs(cgrp);
 	cpuset_filetype_t type = cft->private;
 
-	cgroup_lock();
-
-	if (cgroup_is_removed(cgrp)) {
-		cgroup_unlock();
+	if (!cgroup_lock_live_group(cgrp))
 		return -ENODEV;
-	}
+
 	switch (type) {
 	case FILE_SCHED_RELAX_DOMAIN_LEVEL:
 		retval = update_relax_domain_level(cs, val);
@@ -1386,6 +1371,32 @@ static int cpuset_write_s64(struct cgroup *cgrp, struct cftype *cft, s64 val)
 }
 
 /*
+ * Common handling for a write to a "cpus" or "mems" file.
+ */
+static int cpuset_write_resmask(struct cgroup *cgrp, struct cftype *cft,
+				const char *buf)
+{
+	int retval = 0;
+
+	if (!cgroup_lock_live_group(cgrp))
+		return -ENODEV;
+
+	switch (cft->private) {
+	case FILE_CPULIST:
+		retval = update_cpumask(cgroup_cs(cgrp), buf);
+		break;
+	case FILE_MEMLIST:
+		retval = update_nodemask(cgroup_cs(cgrp), buf);
+		break;
+	default:
+		retval = -EINVAL;
+		break;
+	}
+	cgroup_unlock();
+	return retval;
+}
+
+/*
  * These ascii lists should be read in a single call, by using a user
  * buffer large enough to hold the entire map.  If read in smaller
  * chunks, there is no guarantee of atomicity.  Since the display format
@@ -1504,14 +1515,16 @@ static struct cftype files[] = {
 	{
 		.name = "cpus",
 		.read = cpuset_common_file_read,
-		.write = cpuset_common_file_write,
+		.write_string = cpuset_write_resmask,
+		.max_write_len = (100U + 6 * NR_CPUS),
 		.private = FILE_CPULIST,
 	},
 
 	{
 		.name = "mems",
 		.read = cpuset_common_file_read,
-		.write = cpuset_common_file_write,
+		.write_string = cpuset_write_resmask,
+		.max_write_len = (100U + 6 * MAX_NUMNODES),
 		.private = FILE_MEMLIST,
 	},
 
@@ -1792,7 +1805,7 @@ static void move_member_tasks_to_cpuset(struct cpuset *from, struct cpuset *to)
 	scan.scan.heap = NULL;
 	scan.to = to->css.cgroup;
 
-	if (cgroup_scan_tasks((struct cgroup_scanner *)&scan))
+	if (cgroup_scan_tasks(&scan.scan))
 		printk(KERN_ERR "move_member_tasks_to_cpuset: "
 				"cgroup_scan_tasks failed\n");
 }
@@ -1848,29 +1861,29 @@ static void remove_tasks_in_empty_cpuset(struct cpuset *cs)
  */
 static void scan_for_empty_cpusets(const struct cpuset *root)
 {
+	LIST_HEAD(queue);
 	struct cpuset *cp;	/* scans cpusets being updated */
 	struct cpuset *child;	/* scans child cpusets of cp */
-	struct list_head queue;
 	struct cgroup *cont;
-
-	INIT_LIST_HEAD(&queue);
+	nodemask_t oldmems;
 
 	list_add_tail((struct list_head *)&root->stack_list, &queue);
 
 	while (!list_empty(&queue)) {
-		cp = container_of(queue.next, struct cpuset, stack_list);
+		cp = list_first_entry(&queue, struct cpuset, stack_list);
 		list_del(queue.next);
 		list_for_each_entry(cont, &cp->css.cgroup->children, sibling) {
 			child = cgroup_cs(cont);
 			list_add_tail(&child->stack_list, &queue);
 		}
-		cont = cp->css.cgroup;
 
 		/* Continue past cpusets with all cpus, mems online */
 		if (cpus_subset(cp->cpus_allowed, cpu_online_map) &&
 		    nodes_subset(cp->mems_allowed, node_states[N_HIGH_MEMORY]))
 			continue;
 
+		oldmems = cp->mems_allowed;
+
 		/* Remove offline cpus and mems from this cpuset. */
 		mutex_lock(&callback_mutex);
 		cpus_and(cp->cpus_allowed, cp->cpus_allowed, cpu_online_map);
@@ -1882,6 +1895,10 @@ static void scan_for_empty_cpusets(const struct cpuset *root)
 		if (cpus_empty(cp->cpus_allowed) ||
 		     nodes_empty(cp->mems_allowed))
 			remove_tasks_in_empty_cpuset(cp);
+		else {
+			update_tasks_cpumask(cp);
+			update_tasks_nodemask(cp, &oldmems);
+		}
 	}
 }
 
@@ -1974,7 +1991,6 @@ void __init cpuset_init_smp(void)
 }
 
 /**
-
  * cpuset_cpus_allowed - return cpus_allowed mask from a tasks cpuset.
  * @tsk: pointer to task_struct from which to obtain cpuset->cpus_allowed.
  * @pmask: pointer to cpumask_t variable to receive cpus_allowed set.
diff --git a/kernel/delayacct.c b/kernel/delayacct.c
index 10e43fd8b721..b3179dad71be 100644
--- a/kernel/delayacct.c
+++ b/kernel/delayacct.c
@@ -145,8 +145,11 @@ int __delayacct_add_tsk(struct taskstats *d, struct task_struct *tsk)
 	d->blkio_delay_total = (tmp < d->blkio_delay_total) ? 0 : tmp;
 	tmp = d->swapin_delay_total + tsk->delays->swapin_delay;
 	d->swapin_delay_total = (tmp < d->swapin_delay_total) ? 0 : tmp;
+	tmp = d->freepages_delay_total + tsk->delays->freepages_delay;
+	d->freepages_delay_total = (tmp < d->freepages_delay_total) ? 0 : tmp;
 	d->blkio_count += tsk->delays->blkio_count;
 	d->swapin_count += tsk->delays->swapin_count;
+	d->freepages_count += tsk->delays->freepages_count;
 	spin_unlock_irqrestore(&tsk->delays->lock, flags);
 
 done:
@@ -165,3 +168,16 @@ __u64 __delayacct_blkio_ticks(struct task_struct *tsk)
 	return ret;
 }
 
+void __delayacct_freepages_start(void)
+{
+	delayacct_start(&current->delays->freepages_start);
+}
+
+void __delayacct_freepages_end(void)
+{
+	delayacct_end(&current->delays->freepages_start,
+			&current->delays->freepages_end,
+			&current->delays->freepages_delay,
+			&current->delays->freepages_count);
+}
+
diff --git a/kernel/dma-coherent.c b/kernel/dma-coherent.c
new file mode 100644
index 000000000000..c1d4d5b4c61c
--- /dev/null
+++ b/kernel/dma-coherent.c
@@ -0,0 +1,153 @@
+/*
+ * Coherent per-device memory handling.
+ * Borrowed from i386
+ */
+#include <linux/kernel.h>
+#include <linux/dma-mapping.h>
+
+struct dma_coherent_mem {
+	void		*virt_base;
+	u32		device_base;
+	int		size;
+	int		flags;
+	unsigned long	*bitmap;
+};
+
+int dma_declare_coherent_memory(struct device *dev, dma_addr_t bus_addr,
+				dma_addr_t device_addr, size_t size, int flags)
+{
+	void __iomem *mem_base = NULL;
+	int pages = size >> PAGE_SHIFT;
+	int bitmap_size = BITS_TO_LONGS(pages) * sizeof(long);
+
+	if ((flags & (DMA_MEMORY_MAP | DMA_MEMORY_IO)) == 0)
+		goto out;
+	if (!size)
+		goto out;
+	if (dev->dma_mem)
+		goto out;
+
+	/* FIXME: this routine just ignores DMA_MEMORY_INCLUDES_CHILDREN */
+
+	mem_base = ioremap(bus_addr, size);
+	if (!mem_base)
+		goto out;
+
+	dev->dma_mem = kzalloc(sizeof(struct dma_coherent_mem), GFP_KERNEL);
+	if (!dev->dma_mem)
+		goto out;
+	dev->dma_mem->bitmap = kzalloc(bitmap_size, GFP_KERNEL);
+	if (!dev->dma_mem->bitmap)
+		goto free1_out;
+
+	dev->dma_mem->virt_base = mem_base;
+	dev->dma_mem->device_base = device_addr;
+	dev->dma_mem->size = pages;
+	dev->dma_mem->flags = flags;
+
+	if (flags & DMA_MEMORY_MAP)
+		return DMA_MEMORY_MAP;
+
+	return DMA_MEMORY_IO;
+
+ free1_out:
+	kfree(dev->dma_mem);
+ out:
+	if (mem_base)
+		iounmap(mem_base);
+	return 0;
+}
+EXPORT_SYMBOL(dma_declare_coherent_memory);
+
+void dma_release_declared_memory(struct device *dev)
+{
+	struct dma_coherent_mem *mem = dev->dma_mem;
+
+	if (!mem)
+		return;
+	dev->dma_mem = NULL;
+	iounmap(mem->virt_base);
+	kfree(mem->bitmap);
+	kfree(mem);
+}
+EXPORT_SYMBOL(dma_release_declared_memory);
+
+void *dma_mark_declared_memory_occupied(struct device *dev,
+					dma_addr_t device_addr, size_t size)
+{
+	struct dma_coherent_mem *mem = dev->dma_mem;
+	int pos, err;
+
+	size += device_addr & ~PAGE_MASK;
+
+	if (!mem)
+		return ERR_PTR(-EINVAL);
+
+	pos = (device_addr - mem->device_base) >> PAGE_SHIFT;
+	err = bitmap_allocate_region(mem->bitmap, pos, get_order(size));
+	if (err != 0)
+		return ERR_PTR(err);
+	return mem->virt_base + (pos << PAGE_SHIFT);
+}
+EXPORT_SYMBOL(dma_mark_declared_memory_occupied);
+
+/**
+ * dma_alloc_from_coherent() - try to allocate memory from the per-device coherent area
+ *
+ * @dev:	device from which we allocate memory
+ * @size:	size of requested memory area
+ * @dma_handle:	This will be filled with the correct dma handle
+ * @ret:	This pointer will be filled with the virtual address
+ * 		to allocated area.
+ *
+ * This function should be only called from per-arch dma_alloc_coherent()
+ * to support allocation from per-device coherent memory pools.
+ *
+ * Returns 0 if dma_alloc_coherent should continue with allocating from
+ * generic memory areas, or !0 if dma_alloc_coherent should return @ret.
+ */
+int dma_alloc_from_coherent(struct device *dev, ssize_t size,
+				       dma_addr_t *dma_handle, void **ret)
+{
+	struct dma_coherent_mem *mem = dev ? dev->dma_mem : NULL;
+	int order = get_order(size);
+
+	if (mem) {
+		int page = bitmap_find_free_region(mem->bitmap, mem->size,
+						     order);
+		if (page >= 0) {
+			*dma_handle = mem->device_base + (page << PAGE_SHIFT);
+			*ret = mem->virt_base + (page << PAGE_SHIFT);
+			memset(*ret, 0, size);
+		} else if (mem->flags & DMA_MEMORY_EXCLUSIVE)
+			*ret = NULL;
+	}
+	return (mem != NULL);
+}
+
+/**
+ * dma_release_from_coherent() - try to free the memory allocated from per-device coherent memory pool
+ * @dev:	device from which the memory was allocated
+ * @order:	the order of pages allocated
+ * @vaddr:	virtual address of allocated pages
+ *
+ * This checks whether the memory was allocated from the per-device
+ * coherent memory pool and if so, releases that memory.
+ *
+ * Returns 1 if we correctly released the memory, or 0 if
+ * dma_release_coherent() should proceed with releasing memory from
+ * generic pools.
+ */
+int dma_release_from_coherent(struct device *dev, int order, void *vaddr)
+{
+	struct dma_coherent_mem *mem = dev ? dev->dma_mem : NULL;
+
+	if (mem && vaddr >= mem->virt_base && vaddr <
+		   (mem->virt_base + (mem->size << PAGE_SHIFT))) {
+		int page = (vaddr - mem->virt_base) >> PAGE_SHIFT;
+
+		bitmap_release_region(mem->bitmap, page, order);
+		return 1;
+	}
+	return 0;
+}
diff --git a/kernel/exec_domain.c b/kernel/exec_domain.c
index c1ef192aa655..0d407e886735 100644
--- a/kernel/exec_domain.c
+++ b/kernel/exec_domain.c
@@ -168,7 +168,6 @@ __set_personality(u_long personality)
 	current->personality = personality;
 	oep = current_thread_info()->exec_domain;
 	current_thread_info()->exec_domain = ep;
-	set_fs_altroot();
 
 	module_put(oep->module);
 	return 0;
diff --git a/kernel/exit.c b/kernel/exit.c
index 93d2711b9381..25ed2ad986df 100644
--- a/kernel/exit.c
+++ b/kernel/exit.c
@@ -46,6 +46,7 @@
 #include <linux/resource.h>
 #include <linux/blkdev.h>
 #include <linux/task_io_accounting_ops.h>
+#include <linux/tracehook.h>
 
 #include <asm/uaccess.h>
 #include <asm/unistd.h>
@@ -85,7 +86,6 @@ static void __exit_signal(struct task_struct *tsk)
 	BUG_ON(!sig);
 	BUG_ON(!atomic_read(&sig->count));
 
-	rcu_read_lock();
 	sighand = rcu_dereference(tsk->sighand);
 	spin_lock(&sighand->siglock);
 
@@ -121,6 +121,7 @@ static void __exit_signal(struct task_struct *tsk)
 		sig->nivcsw += tsk->nivcsw;
 		sig->inblock += task_io_get_inblock(tsk);
 		sig->oublock += task_io_get_oublock(tsk);
+		task_io_accounting_add(&sig->ioac, &tsk->ioac);
 		sig->sum_sched_runtime += tsk->se.sum_exec_runtime;
 		sig = NULL; /* Marker for below. */
 	}
@@ -136,7 +137,6 @@ static void __exit_signal(struct task_struct *tsk)
 	tsk->signal = NULL;
 	tsk->sighand = NULL;
 	spin_unlock(&sighand->siglock);
-	rcu_read_unlock();
 
 	__cleanup_sighand(sighand);
 	clear_tsk_thread_flag(tsk,TIF_SIGPENDING);
@@ -152,27 +152,17 @@ static void delayed_put_task_struct(struct rcu_head *rhp)
 	put_task_struct(container_of(rhp, struct task_struct, rcu));
 }
 
-/*
- * Do final ptrace-related cleanup of a zombie being reaped.
- *
- * Called with write_lock(&tasklist_lock) held.
- */
-static void ptrace_release_task(struct task_struct *p)
-{
-	BUG_ON(!list_empty(&p->ptraced));
-	ptrace_unlink(p);
-	BUG_ON(!list_empty(&p->ptrace_entry));
-}
 
 void release_task(struct task_struct * p)
 {
 	struct task_struct *leader;
 	int zap_leader;
 repeat:
+	tracehook_prepare_release_task(p);
 	atomic_dec(&p->user->processes);
 	proc_flush_task(p);
 	write_lock_irq(&tasklist_lock);
-	ptrace_release_task(p);
+	tracehook_finish_release_task(p);
 	__exit_signal(p);
 
 	/*
@@ -194,6 +184,13 @@ repeat:
 		 * that case.
 		 */
 		zap_leader = task_detached(leader);
+
+		/*
+		 * This maintains the invariant that release_task()
+		 * only runs on a task in EXIT_DEAD, just for sanity.
+		 */
+		if (zap_leader)
+			leader->exit_state = EXIT_DEAD;
 	}
 
 	write_unlock_irq(&tasklist_lock);
@@ -432,7 +429,7 @@ void daemonize(const char *name, ...)
 	 * We don't want to have TIF_FREEZE set if the system-wide hibernation
 	 * or suspend transition begins right now.
 	 */
-	current->flags |= PF_NOFREEZE;
+	current->flags |= (PF_NOFREEZE | PF_KTHREAD);
 
 	if (current->nsproxy != &init_nsproxy) {
 		get_nsproxy(&init_nsproxy);
@@ -557,8 +554,6 @@ void put_fs_struct(struct fs_struct *fs)
 	if (atomic_dec_and_test(&fs->count)) {
 		path_put(&fs->root);
 		path_put(&fs->pwd);
-		if (fs->altroot.dentry)
-			path_put(&fs->altroot);
 		kmem_cache_free(fs_cachep, fs);
 	}
 }
@@ -666,26 +661,40 @@ assign_new_owner:
 static void exit_mm(struct task_struct * tsk)
 {
 	struct mm_struct *mm = tsk->mm;
+	struct core_state *core_state;
 
 	mm_release(tsk, mm);
 	if (!mm)
 		return;
 	/*
 	 * Serialize with any possible pending coredump.
-	 * We must hold mmap_sem around checking core_waiters
+	 * We must hold mmap_sem around checking core_state
 	 * and clearing tsk->mm.  The core-inducing thread
-	 * will increment core_waiters for each thread in the
+	 * will increment ->nr_threads for each thread in the
 	 * group with ->mm != NULL.
 	 */
 	down_read(&mm->mmap_sem);
-	if (mm->core_waiters) {
+	core_state = mm->core_state;
+	if (core_state) {
+		struct core_thread self;
 		up_read(&mm->mmap_sem);
-		down_write(&mm->mmap_sem);
-		if (!--mm->core_waiters)
-			complete(mm->core_startup_done);
-		up_write(&mm->mmap_sem);
 
-		wait_for_completion(&mm->core_done);
+		self.task = tsk;
+		self.next = xchg(&core_state->dumper.next, &self);
+		/*
+		 * Implies mb(), the result of xchg() must be visible
+		 * to core_state->dumper.
+		 */
+		if (atomic_dec_and_test(&core_state->nr_threads))
+			complete(&core_state->startup);
+
+		for (;;) {
+			set_task_state(tsk, TASK_UNINTERRUPTIBLE);
+			if (!self.task) /* see coredump_finish() */
+				break;
+			schedule();
+		}
+		__set_task_state(tsk, TASK_RUNNING);
 		down_read(&mm->mmap_sem);
 	}
 	atomic_inc(&mm->mm_count);
@@ -822,26 +831,50 @@ static void reparent_thread(struct task_struct *p, struct task_struct *father)
  * the child reaper process (ie "init") in our pid
  * space.
  */
+static struct task_struct *find_new_reaper(struct task_struct *father)
+{
+	struct pid_namespace *pid_ns = task_active_pid_ns(father);
+	struct task_struct *thread;
+
+	thread = father;
+	while_each_thread(father, thread) {
+		if (thread->flags & PF_EXITING)
+			continue;
+		if (unlikely(pid_ns->child_reaper == father))
+			pid_ns->child_reaper = thread;
+		return thread;
+	}
+
+	if (unlikely(pid_ns->child_reaper == father)) {
+		write_unlock_irq(&tasklist_lock);
+		if (unlikely(pid_ns == &init_pid_ns))
+			panic("Attempted to kill init!");
+
+		zap_pid_ns_processes(pid_ns);
+		write_lock_irq(&tasklist_lock);
+		/*
+		 * We can not clear ->child_reaper or leave it alone.
+		 * There may by stealth EXIT_DEAD tasks on ->children,
+		 * forget_original_parent() must move them somewhere.
+		 */
+		pid_ns->child_reaper = init_pid_ns.child_reaper;
+	}
+
+	return pid_ns->child_reaper;
+}
+
 static void forget_original_parent(struct task_struct *father)
 {
-	struct task_struct *p, *n, *reaper = father;
+	struct task_struct *p, *n, *reaper;
 	LIST_HEAD(ptrace_dead);
 
 	write_lock_irq(&tasklist_lock);
-
+	reaper = find_new_reaper(father);
 	/*
 	 * First clean up ptrace if we were using it.
 	 */
 	ptrace_exit(father, &ptrace_dead);
 
-	do {
-		reaper = next_thread(reaper);
-		if (reaper == father) {
-			reaper = task_child_reaper(father);
-			break;
-		}
-	} while (reaper->flags & PF_EXITING);
-
 	list_for_each_entry_safe(p, n, &father->children, sibling) {
 		p->real_parent = reaper;
 		if (p->parent == father) {
@@ -863,7 +896,8 @@ static void forget_original_parent(struct task_struct *father)
  */
 static void exit_notify(struct task_struct *tsk, int group_dead)
 {
-	int state;
+	int signal;
+	void *cookie;
 
 	/*
 	 * This does two things:
@@ -900,33 +934,24 @@ static void exit_notify(struct task_struct *tsk, int group_dead)
 	    !capable(CAP_KILL))
 		tsk->exit_signal = SIGCHLD;
 
-	/* If something other than our normal parent is ptracing us, then
-	 * send it a SIGCHLD instead of honoring exit_signal.  exit_signal
-	 * only has special meaning to our real parent.
-	 */
-	if (!task_detached(tsk) && thread_group_empty(tsk)) {
-		int signal = ptrace_reparented(tsk) ?
-				SIGCHLD : tsk->exit_signal;
-		do_notify_parent(tsk, signal);
-	} else if (tsk->ptrace) {
-		do_notify_parent(tsk, SIGCHLD);
-	}
+	signal = tracehook_notify_death(tsk, &cookie, group_dead);
+	if (signal >= 0)
+		signal = do_notify_parent(tsk, signal);
 
-	state = EXIT_ZOMBIE;
-	if (task_detached(tsk) && likely(!tsk->ptrace))
-		state = EXIT_DEAD;
-	tsk->exit_state = state;
+	tsk->exit_state = signal == DEATH_REAP ? EXIT_DEAD : EXIT_ZOMBIE;
 
 	/* mt-exec, de_thread() is waiting for us */
 	if (thread_group_leader(tsk) &&
-	    tsk->signal->notify_count < 0 &&
-	    tsk->signal->group_exit_task)
+	    tsk->signal->group_exit_task &&
+	    tsk->signal->notify_count < 0)
 		wake_up_process(tsk->signal->group_exit_task);
 
 	write_unlock_irq(&tasklist_lock);
 
+	tracehook_report_death(tsk, signal, cookie, group_dead);
+
 	/* If the process is dead, release it - nobody will wait for it */
-	if (state == EXIT_DEAD)
+	if (signal == DEATH_REAP)
 		release_task(tsk);
 }
 
@@ -958,39 +983,6 @@ static void check_stack_usage(void)
 static inline void check_stack_usage(void) {}
 #endif
 
-static inline void exit_child_reaper(struct task_struct *tsk)
-{
-	if (likely(tsk->group_leader != task_child_reaper(tsk)))
-		return;
-
-	if (tsk->nsproxy->pid_ns == &init_pid_ns)
-		panic("Attempted to kill init!");
-
-	/*
-	 * @tsk is the last thread in the 'cgroup-init' and is exiting.
-	 * Terminate all remaining processes in the namespace and reap them
-	 * before exiting @tsk.
-	 *
-	 * Note that @tsk (last thread of cgroup-init) may not necessarily
-	 * be the child-reaper (i.e main thread of cgroup-init) of the
-	 * namespace i.e the child_reaper may have already exited.
-	 *
-	 * Even after a child_reaper exits, we let it inherit orphaned children,
-	 * because, pid_ns->child_reaper remains valid as long as there is
-	 * at least one living sub-thread in the cgroup init.
-
-	 * This living sub-thread of the cgroup-init will be notified when
-	 * a child inherited by the 'child-reaper' exits (do_notify_parent()
-	 * uses __group_send_sig_info()). Further, when reaping child processes,
-	 * do_wait() iterates over children of all living sub threads.
-
-	 * i.e even though 'child_reaper' thread is listed as the parent of the
-	 * orphaned children, any living sub-thread in the cgroup-init can
-	 * perform the role of the child_reaper.
-	 */
-	zap_pid_ns_processes(tsk->nsproxy->pid_ns);
-}
-
 NORET_TYPE void do_exit(long code)
 {
 	struct task_struct *tsk = current;
@@ -1005,10 +997,7 @@ NORET_TYPE void do_exit(long code)
 	if (unlikely(!tsk->pid))
 		panic("Attempted to kill the idle task!");
 
-	if (unlikely(current->ptrace & PT_TRACE_EXIT)) {
-		current->ptrace_message = code;
-		ptrace_notify((PTRACE_EVENT_EXIT << 8) | SIGTRAP);
-	}
+	tracehook_report_exit(&code);
 
 	/*
 	 * We're taking recursive faults here in do_exit. Safest is to just
@@ -1053,7 +1042,6 @@ NORET_TYPE void do_exit(long code)
 	}
 	group_dead = atomic_dec_and_test(&tsk->signal->live);
 	if (group_dead) {
-		exit_child_reaper(tsk);
 		hrtimer_cancel(&tsk->signal->real_timer);
 		exit_itimers(tsk->signal);
 	}
@@ -1354,6 +1342,8 @@ static int wait_task_zombie(struct task_struct *p, int options,
 		psig->coublock +=
 			task_io_get_oublock(p) +
 			sig->oublock + sig->coublock;
+		task_io_accounting_add(&psig->ioac, &p->ioac);
+		task_io_accounting_add(&psig->ioac, &sig->ioac);
 		spin_unlock_irq(&p->parent->sighand->siglock);
 	}
 
diff --git a/kernel/fork.c b/kernel/fork.c
index 552c8d8e77ad..7ce2ebe84796 100644
--- a/kernel/fork.c
+++ b/kernel/fork.c
@@ -27,6 +27,7 @@
 #include <linux/key.h>
 #include <linux/binfmts.h>
 #include <linux/mman.h>
+#include <linux/mmu_notifier.h>
 #include <linux/fs.h>
 #include <linux/nsproxy.h>
 #include <linux/capability.h>
@@ -37,6 +38,7 @@
 #include <linux/swap.h>
 #include <linux/syscalls.h>
 #include <linux/jiffies.h>
+#include <linux/tracehook.h>
 #include <linux/futex.h>
 #include <linux/task_io_accounting_ops.h>
 #include <linux/rcupdate.h>
@@ -93,6 +95,23 @@ int nr_processes(void)
 static struct kmem_cache *task_struct_cachep;
 #endif
 
+#ifndef __HAVE_ARCH_THREAD_INFO_ALLOCATOR
+static inline struct thread_info *alloc_thread_info(struct task_struct *tsk)
+{
+#ifdef CONFIG_DEBUG_STACK_USAGE
+	gfp_t mask = GFP_KERNEL | __GFP_ZERO;
+#else
+	gfp_t mask = GFP_KERNEL;
+#endif
+	return (struct thread_info *)__get_free_pages(mask, THREAD_SIZE_ORDER);
+}
+
+static inline void free_thread_info(struct thread_info *ti)
+{
+	free_pages((unsigned long)ti, THREAD_SIZE_ORDER);
+}
+#endif
+
 /* SLAB cache for signal_struct structures (tsk->signal) */
 static struct kmem_cache *signal_cachep;
 
@@ -383,7 +402,7 @@ static struct mm_struct * mm_init(struct mm_struct * mm, struct task_struct *p)
 	INIT_LIST_HEAD(&mm->mmlist);
 	mm->flags = (current->mm) ? current->mm->flags
 				  : MMF_DUMP_FILTER_DEFAULT;
-	mm->core_waiters = 0;
+	mm->core_state = NULL;
 	mm->nr_ptes = 0;
 	set_mm_counter(mm, file_rss, 0);
 	set_mm_counter(mm, anon_rss, 0);
@@ -396,6 +415,7 @@ static struct mm_struct * mm_init(struct mm_struct * mm, struct task_struct *p)
 
 	if (likely(!mm_alloc_pgd(mm))) {
 		mm->def_flags = 0;
+		mmu_notifier_mm_init(mm);
 		return mm;
 	}
 
@@ -428,6 +448,7 @@ void __mmdrop(struct mm_struct *mm)
 	BUG_ON(mm == &init_mm);
 	mm_free_pgd(mm);
 	destroy_context(mm);
+	mmu_notifier_mm_destroy(mm);
 	free_mm(mm);
 }
 EXPORT_SYMBOL_GPL(__mmdrop);
@@ -457,7 +478,7 @@ EXPORT_SYMBOL_GPL(mmput);
 /**
  * get_task_mm - acquire a reference to the task's mm
  *
- * Returns %NULL if the task has no mm.  Checks PF_BORROWED_MM (meaning
+ * Returns %NULL if the task has no mm.  Checks PF_KTHREAD (meaning
  * this kernel workthread has transiently adopted a user mm with use_mm,
  * to do its AIO) is not set and if so returns a reference to it, after
  * bumping up the use count.  User must release the mm via mmput()
@@ -470,7 +491,7 @@ struct mm_struct *get_task_mm(struct task_struct *task)
 	task_lock(task);
 	mm = task->mm;
 	if (mm) {
-		if (task->flags & PF_BORROWED_MM)
+		if (task->flags & PF_KTHREAD)
 			mm = NULL;
 		else
 			atomic_inc(&mm->mm_users);
@@ -639,13 +660,6 @@ static struct fs_struct *__copy_fs_struct(struct fs_struct *old)
 		path_get(&old->root);
 		fs->pwd = old->pwd;
 		path_get(&old->pwd);
-		if (old->altroot.dentry) {
-			fs->altroot = old->altroot;
-			path_get(&old->altroot);
-		} else {
-			fs->altroot.mnt = NULL;
-			fs->altroot.dentry = NULL;
-		}
 		read_unlock(&old->lock);
 	}
 	return fs;
@@ -795,6 +809,7 @@ static int copy_signal(unsigned long clone_flags, struct task_struct *tsk)
 	sig->nvcsw = sig->nivcsw = sig->cnvcsw = sig->cnivcsw = 0;
 	sig->min_flt = sig->maj_flt = sig->cmin_flt = sig->cmaj_flt = 0;
 	sig->inblock = sig->oublock = sig->cinblock = sig->coublock = 0;
+	task_io_accounting_init(&sig->ioac);
 	sig->sum_sched_runtime = 0;
 	INIT_LIST_HEAD(&sig->cpu_timers[0]);
 	INIT_LIST_HEAD(&sig->cpu_timers[1]);
@@ -842,8 +857,7 @@ static void copy_flags(unsigned long clone_flags, struct task_struct *p)
 
 	new_flags &= ~PF_SUPERPRIV;
 	new_flags |= PF_FORKNOEXEC;
-	if (!(clone_flags & CLONE_PTRACE))
-		p->ptrace = 0;
+	new_flags |= PF_STARTING;
 	p->flags = new_flags;
 	clear_freeze_flag(p);
 }
@@ -884,7 +898,8 @@ static struct task_struct *copy_process(unsigned long clone_flags,
 					struct pt_regs *regs,
 					unsigned long stack_size,
 					int __user *child_tidptr,
-					struct pid *pid)
+					struct pid *pid,
+					int trace)
 {
 	int retval;
 	struct task_struct *p;
@@ -977,13 +992,7 @@ static struct task_struct *copy_process(unsigned long clone_flags,
 	p->last_switch_timestamp = 0;
 #endif
 
-#ifdef CONFIG_TASK_XACCT
-	p->rchar = 0;		/* I/O counter: bytes read */
-	p->wchar = 0;		/* I/O counter: bytes written */
-	p->syscr = 0;		/* I/O counter: read syscalls */
-	p->syscw = 0;		/* I/O counter: write syscalls */
-#endif
-	task_io_accounting_init(p);
+	task_io_accounting_init(&p->ioac);
 	acct_clear_integrals(p);
 
 	p->it_virt_expires = cputime_zero;
@@ -1090,6 +1099,12 @@ static struct task_struct *copy_process(unsigned long clone_flags,
 	if (clone_flags & CLONE_THREAD)
 		p->tgid = current->tgid;
 
+	if (current->nsproxy != p->nsproxy) {
+		retval = ns_cgroup_clone(p, pid);
+		if (retval)
+			goto bad_fork_free_pid;
+	}
+
 	p->set_child_tid = (clone_flags & CLONE_CHILD_SETTID) ? child_tidptr : NULL;
 	/*
 	 * Clear TID on mm_release()?
@@ -1134,8 +1149,6 @@ static struct task_struct *copy_process(unsigned long clone_flags,
 	 */
 	p->group_leader = p;
 	INIT_LIST_HEAD(&p->thread_group);
-	INIT_LIST_HEAD(&p->ptrace_entry);
-	INIT_LIST_HEAD(&p->ptraced);
 
 	/* Now that the task is set up, run cgroup callbacks if
 	 * necessary. We need to run them before the task is visible
@@ -1166,7 +1179,6 @@ static struct task_struct *copy_process(unsigned long clone_flags,
 		p->real_parent = current->real_parent;
 	else
 		p->real_parent = current;
-	p->parent = p->real_parent;
 
 	spin_lock(&current->sighand->siglock);
 
@@ -1208,8 +1220,7 @@ static struct task_struct *copy_process(unsigned long clone_flags,
 
 	if (likely(p->pid)) {
 		list_add_tail(&p->sibling, &p->real_parent->children);
-		if (unlikely(p->ptrace & PT_PTRACED))
-			__ptrace_link(p, current->parent);
+		tracehook_finish_clone(p, clone_flags, trace);
 
 		if (thread_group_leader(p)) {
 			if (clone_flags & CLONE_NEWPID)
@@ -1294,29 +1305,13 @@ struct task_struct * __cpuinit fork_idle(int cpu)
 	struct pt_regs regs;
 
 	task = copy_process(CLONE_VM, 0, idle_regs(&regs), 0, NULL,
-				&init_struct_pid);
+			    &init_struct_pid, 0);
 	if (!IS_ERR(task))
 		init_idle(task, cpu);
 
 	return task;
 }
 
-static int fork_traceflag(unsigned clone_flags)
-{
-	if (clone_flags & CLONE_UNTRACED)
-		return 0;
-	else if (clone_flags & CLONE_VFORK) {
-		if (current->ptrace & PT_TRACE_VFORK)
-			return PTRACE_EVENT_VFORK;
-	} else if ((clone_flags & CSIGNAL) != SIGCHLD) {
-		if (current->ptrace & PT_TRACE_CLONE)
-			return PTRACE_EVENT_CLONE;
-	} else if (current->ptrace & PT_TRACE_FORK)
-		return PTRACE_EVENT_FORK;
-
-	return 0;
-}
-
 /*
  *  Ok, this is the main fork-routine.
  *
@@ -1351,14 +1346,14 @@ long do_fork(unsigned long clone_flags,
 		}
 	}
 
-	if (unlikely(current->ptrace)) {
-		trace = fork_traceflag (clone_flags);
-		if (trace)
-			clone_flags |= CLONE_PTRACE;
-	}
+	/*
+	 * When called from kernel_thread, don't do user tracing stuff.
+	 */
+	if (likely(user_mode(regs)))
+		trace = tracehook_prepare_clone(clone_flags);
 
 	p = copy_process(clone_flags, stack_start, regs, stack_size,
-			child_tidptr, NULL);
+			 child_tidptr, NULL, trace);
 	/*
 	 * Do this prior waking up the new thread - the thread pointer
 	 * might get invalid after that point, if the thread exits quickly.
@@ -1376,32 +1371,35 @@ long do_fork(unsigned long clone_flags,
 			init_completion(&vfork);
 		}
 
-		if ((p->ptrace & PT_PTRACED) || (clone_flags & CLONE_STOPPED)) {
+		tracehook_report_clone(trace, regs, clone_flags, nr, p);
+
+		/*
+		 * We set PF_STARTING at creation in case tracing wants to
+		 * use this to distinguish a fully live task from one that
+		 * hasn't gotten to tracehook_report_clone() yet.  Now we
+		 * clear it and set the child going.
+		 */
+		p->flags &= ~PF_STARTING;
+
+		if (unlikely(clone_flags & CLONE_STOPPED)) {
 			/*
 			 * We'll start up with an immediate SIGSTOP.
 			 */
 			sigaddset(&p->pending.signal, SIGSTOP);
 			set_tsk_thread_flag(p, TIF_SIGPENDING);
-		}
-
-		if (!(clone_flags & CLONE_STOPPED))
-			wake_up_new_task(p, clone_flags);
-		else
 			__set_task_state(p, TASK_STOPPED);
-
-		if (unlikely (trace)) {
-			current->ptrace_message = nr;
-			ptrace_notify ((trace << 8) | SIGTRAP);
+		} else {
+			wake_up_new_task(p, clone_flags);
 		}
 
+		tracehook_report_clone_complete(trace, regs,
+						clone_flags, nr, p);
+
 		if (clone_flags & CLONE_VFORK) {
 			freezer_do_not_count();
 			wait_for_completion(&vfork);
 			freezer_count();
-			if (unlikely (current->ptrace & PT_TRACE_VFORK_DONE)) {
-				current->ptrace_message = nr;
-				ptrace_notify ((PTRACE_EVENT_VFORK_DONE << 8) | SIGTRAP);
-			}
+			tracehook_report_vfork_done(p, nr);
 		}
 	} else {
 		nr = PTR_ERR(p);
@@ -1413,7 +1411,7 @@ long do_fork(unsigned long clone_flags,
 #define ARCH_MIN_MMSTRUCT_ALIGN 0
 #endif
 
-static void sighand_ctor(struct kmem_cache *cachep, void *data)
+static void sighand_ctor(void *data)
 {
 	struct sighand_struct *sighand = data;
 
diff --git a/kernel/irq/chip.c b/kernel/irq/chip.c
index 964964baefa2..3cd441ebf5d2 100644
--- a/kernel/irq/chip.c
+++ b/kernel/irq/chip.c
@@ -28,8 +28,7 @@ void dynamic_irq_init(unsigned int irq)
 	unsigned long flags;
 
 	if (irq >= NR_IRQS) {
-		printk(KERN_ERR "Trying to initialize invalid IRQ%d\n", irq);
-		WARN_ON(1);
+		WARN(1, KERN_ERR "Trying to initialize invalid IRQ%d\n", irq);
 		return;
 	}
 
@@ -62,8 +61,7 @@ void dynamic_irq_cleanup(unsigned int irq)
 	unsigned long flags;
 
 	if (irq >= NR_IRQS) {
-		printk(KERN_ERR "Trying to cleanup invalid IRQ%d\n", irq);
-		WARN_ON(1);
+		WARN(1, KERN_ERR "Trying to cleanup invalid IRQ%d\n", irq);
 		return;
 	}
 
@@ -71,9 +69,8 @@ void dynamic_irq_cleanup(unsigned int irq)
 	spin_lock_irqsave(&desc->lock, flags);
 	if (desc->action) {
 		spin_unlock_irqrestore(&desc->lock, flags);
-		printk(KERN_ERR "Destroying IRQ%d without calling free_irq\n",
+		WARN(1, KERN_ERR "Destroying IRQ%d without calling free_irq\n",
 			irq);
-		WARN_ON(1);
 		return;
 	}
 	desc->msi_desc = NULL;
@@ -96,8 +93,7 @@ int set_irq_chip(unsigned int irq, struct irq_chip *chip)
 	unsigned long flags;
 
 	if (irq >= NR_IRQS) {
-		printk(KERN_ERR "Trying to install chip for IRQ%d\n", irq);
-		WARN_ON(1);
+		WARN(1, KERN_ERR "Trying to install chip for IRQ%d\n", irq);
 		return -EINVAL;
 	}
 
diff --git a/kernel/irq/manage.c b/kernel/irq/manage.c
index 5bc6e5ecc493..60c49e324390 100644
--- a/kernel/irq/manage.c
+++ b/kernel/irq/manage.c
@@ -89,7 +89,14 @@ int irq_set_affinity(unsigned int irq, cpumask_t cpumask)
 	set_balance_irq_affinity(irq, cpumask);
 
 #ifdef CONFIG_GENERIC_PENDING_IRQ
-	set_pending_irq(irq, cpumask);
+	if (desc->status & IRQ_MOVE_PCNTXT) {
+		unsigned long flags;
+
+		spin_lock_irqsave(&desc->lock, flags);
+		desc->chip->set_affinity(irq, cpumask);
+		spin_unlock_irqrestore(&desc->lock, flags);
+	} else
+		set_pending_irq(irq, cpumask);
 #else
 	desc->affinity = cpumask;
 	desc->chip->set_affinity(irq, cpumask);
@@ -177,8 +184,7 @@ static void __enable_irq(struct irq_desc *desc, unsigned int irq)
 {
 	switch (desc->depth) {
 	case 0:
-		printk(KERN_WARNING "Unbalanced enable for IRQ %d\n", irq);
-		WARN_ON(1);
+		WARN(1, KERN_WARNING "Unbalanced enable for IRQ %d\n", irq);
 		break;
 	case 1: {
 		unsigned int status = desc->status & ~IRQ_DISABLED;
@@ -260,9 +266,7 @@ int set_irq_wake(unsigned int irq, unsigned int on)
 		}
 	} else {
 		if (desc->wake_depth == 0) {
-			printk(KERN_WARNING "Unbalanced IRQ %d "
-					"wake disable\n", irq);
-			WARN_ON(1);
+			WARN(1, "Unbalanced IRQ %d wake disable\n", irq);
 		} else if (--desc->wake_depth == 0) {
 			ret = set_irq_wake_real(irq, on);
 			if (ret)
@@ -326,7 +330,8 @@ static int __irq_set_trigger(struct irq_chip *chip, unsigned int irq,
 	ret = chip->set_type(irq, flags & IRQF_TRIGGER_MASK);
 
 	if (ret)
-		pr_err("setting flow type for irq %u failed (%pF)\n",
+		pr_err("setting trigger mode %d for irq %u failed (%pF)\n",
+				(int)(flags & IRQF_TRIGGER_MASK),
 				irq, chip->set_type);
 
 	return ret;
diff --git a/kernel/irq/proc.c b/kernel/irq/proc.c
index 6c6d35d68ee9..a09dd29c2fd7 100644
--- a/kernel/irq/proc.c
+++ b/kernel/irq/proc.c
@@ -8,6 +8,7 @@
 
 #include <linux/irq.h>
 #include <linux/proc_fs.h>
+#include <linux/seq_file.h>
 #include <linux/interrupt.h>
 
 #include "internals.h"
@@ -16,23 +17,18 @@ static struct proc_dir_entry *root_irq_dir;
 
 #ifdef CONFIG_SMP
 
-static int irq_affinity_read_proc(char *page, char **start, off_t off,
-				  int count, int *eof, void *data)
+static int irq_affinity_proc_show(struct seq_file *m, void *v)
 {
-	struct irq_desc *desc = irq_desc + (long)data;
+	struct irq_desc *desc = irq_desc + (long)m->private;
 	cpumask_t *mask = &desc->affinity;
-	int len;
 
 #ifdef CONFIG_GENERIC_PENDING_IRQ
 	if (desc->status & IRQ_MOVE_PENDING)
 		mask = &desc->pending_mask;
 #endif
-	len = cpumask_scnprintf(page, count, *mask);
-
-	if (count - len < 2)
-		return -EINVAL;
-	len += sprintf(page + len, "\n");
-	return len;
+	seq_cpumask(m, mask);
+	seq_putc(m, '\n');
+	return 0;
 }
 
 #ifndef is_affinity_mask_valid
@@ -40,11 +36,12 @@ static int irq_affinity_read_proc(char *page, char **start, off_t off,
 #endif
 
 int no_irq_affinity;
-static int irq_affinity_write_proc(struct file *file, const char __user *buffer,
-				   unsigned long count, void *data)
+static ssize_t irq_affinity_proc_write(struct file *file,
+		const char __user *buffer, size_t count, loff_t *pos)
 {
-	unsigned int irq = (int)(long)data, full_count = count, err;
+	unsigned int irq = (int)(long)PDE(file->f_path.dentry->d_inode)->data;
 	cpumask_t new_value;
+	int err;
 
 	if (!irq_desc[irq].chip->set_affinity || no_irq_affinity ||
 	    irq_balancing_disabled(irq))
@@ -65,28 +62,38 @@ static int irq_affinity_write_proc(struct file *file, const char __user *buffer,
 	if (!cpus_intersects(new_value, cpu_online_map))
 		/* Special case for empty set - allow the architecture
 		   code to set default SMP affinity. */
-		return irq_select_affinity(irq) ? -EINVAL : full_count;
+		return irq_select_affinity(irq) ? -EINVAL : count;
 
 	irq_set_affinity(irq, new_value);
 
-	return full_count;
+	return count;
 }
 
-static int default_affinity_read(char *page, char **start, off_t off,
-				  int count, int *eof, void *data)
+static int irq_affinity_proc_open(struct inode *inode, struct file *file)
 {
-	int len = cpumask_scnprintf(page, count, irq_default_affinity);
-	if (count - len < 2)
-		return -EINVAL;
-	len += sprintf(page + len, "\n");
-	return len;
+	return single_open(file, irq_affinity_proc_show, PDE(inode)->data);
 }
 
-static int default_affinity_write(struct file *file, const char __user *buffer,
-				   unsigned long count, void *data)
+static const struct file_operations irq_affinity_proc_fops = {
+	.open		= irq_affinity_proc_open,
+	.read		= seq_read,
+	.llseek		= seq_lseek,
+	.release	= single_release,
+	.write		= irq_affinity_proc_write,
+};
+
+static int default_affinity_show(struct seq_file *m, void *v)
+{
+	seq_cpumask(m, &irq_default_affinity);
+	seq_putc(m, '\n');
+	return 0;
+}
+
+static ssize_t default_affinity_write(struct file *file,
+		const char __user *buffer, size_t count, loff_t *ppos)
 {
-	unsigned int full_count = count, err;
 	cpumask_t new_value;
+	int err;
 
 	err = cpumask_parse_user(buffer, count, new_value);
 	if (err)
@@ -105,8 +112,21 @@ static int default_affinity_write(struct file *file, const char __user *buffer,
 
 	irq_default_affinity = new_value;
 
-	return full_count;
+	return count;
 }
+
+static int default_affinity_open(struct inode *inode, struct file *file)
+{
+	return single_open(file, default_affinity_show, NULL);
+}
+
+static const struct file_operations default_affinity_proc_fops = {
+	.open		= default_affinity_open,
+	.read		= seq_read,
+	.llseek		= seq_lseek,
+	.release	= single_release,
+	.write		= default_affinity_write,
+};
 #endif
 
 static int irq_spurious_read(char *page, char **start, off_t off,
@@ -178,16 +198,9 @@ void register_irq_proc(unsigned int irq)
 	irq_desc[irq].dir = proc_mkdir(name, root_irq_dir);
 
 #ifdef CONFIG_SMP
-	{
-		/* create /proc/irq/<irq>/smp_affinity */
-		entry = create_proc_entry("smp_affinity", 0600, irq_desc[irq].dir);
-
-		if (entry) {
-			entry->data = (void *)(long)irq;
-			entry->read_proc = irq_affinity_read_proc;
-			entry->write_proc = irq_affinity_write_proc;
-		}
-	}
+	/* create /proc/irq/<irq>/smp_affinity */
+	proc_create_data("smp_affinity", 0600, irq_desc[irq].dir,
+			 &irq_affinity_proc_fops, (void *)(long)irq);
 #endif
 
 	entry = create_proc_entry("spurious", 0444, irq_desc[irq].dir);
@@ -208,15 +221,8 @@ void unregister_handler_proc(unsigned int irq, struct irqaction *action)
 void register_default_affinity_proc(void)
 {
 #ifdef CONFIG_SMP
-	struct proc_dir_entry *entry;
-
-	/* create /proc/irq/default_smp_affinity */
-	entry = create_proc_entry("default_smp_affinity", 0600, root_irq_dir);
-	if (entry) {
-		entry->data = NULL;
-		entry->read_proc  = default_affinity_read;
-		entry->write_proc = default_affinity_write;
-	}
+	proc_create("irq/default_smp_affinity", 0600, NULL,
+		    &default_affinity_proc_fops);
 #endif
 }
 
diff --git a/kernel/kallsyms.c b/kernel/kallsyms.c
index 6fc0040f3e3a..38fc10ac7541 100644
--- a/kernel/kallsyms.c
+++ b/kernel/kallsyms.c
@@ -176,7 +176,7 @@ static unsigned long get_symbol_pos(unsigned long addr,
 	high = kallsyms_num_syms;
 
 	while (high - low > 1) {
-		mid = (low + high) / 2;
+		mid = low + (high - low) / 2;
 		if (kallsyms_addresses[mid] <= addr)
 			low = mid;
 		else
diff --git a/kernel/kexec.c b/kernel/kexec.c
index 1c5fcacbcf33..59f3f0df35d4 100644
--- a/kernel/kexec.c
+++ b/kernel/kexec.c
@@ -12,7 +12,7 @@
 #include <linux/slab.h>
 #include <linux/fs.h>
 #include <linux/kexec.h>
-#include <linux/spinlock.h>
+#include <linux/mutex.h>
 #include <linux/list.h>
 #include <linux/highmem.h>
 #include <linux/syscalls.h>
@@ -24,6 +24,12 @@
 #include <linux/utsrelease.h>
 #include <linux/utsname.h>
 #include <linux/numa.h>
+#include <linux/suspend.h>
+#include <linux/device.h>
+#include <linux/freezer.h>
+#include <linux/pm.h>
+#include <linux/cpu.h>
+#include <linux/console.h>
 
 #include <asm/page.h>
 #include <asm/uaccess.h>
@@ -71,7 +77,7 @@ int kexec_should_crash(struct task_struct *p)
  *
  * The code for the transition from the current kernel to the
  * the new kernel is placed in the control_code_buffer, whose size
- * is given by KEXEC_CONTROL_CODE_SIZE.  In the best case only a single
+ * is given by KEXEC_CONTROL_PAGE_SIZE.  In the best case only a single
  * page of memory is necessary, but some architectures require more.
  * Because this memory must be identity mapped in the transition from
  * virtual to physical addresses it must live in the range
@@ -236,12 +242,18 @@ static int kimage_normal_alloc(struct kimage **rimage, unsigned long entry,
 	 */
 	result = -ENOMEM;
 	image->control_code_page = kimage_alloc_control_pages(image,
-					   get_order(KEXEC_CONTROL_CODE_SIZE));
+					   get_order(KEXEC_CONTROL_PAGE_SIZE));
 	if (!image->control_code_page) {
 		printk(KERN_ERR "Could not allocate control_code_buffer\n");
 		goto out;
 	}
 
+	image->swap_page = kimage_alloc_control_pages(image, 0);
+	if (!image->swap_page) {
+		printk(KERN_ERR "Could not allocate swap buffer\n");
+		goto out;
+	}
+
 	result = 0;
  out:
 	if (result == 0)
@@ -305,7 +317,7 @@ static int kimage_crash_alloc(struct kimage **rimage, unsigned long entry,
 	 */
 	result = -ENOMEM;
 	image->control_code_page = kimage_alloc_control_pages(image,
-					   get_order(KEXEC_CONTROL_CODE_SIZE));
+					   get_order(KEXEC_CONTROL_PAGE_SIZE));
 	if (!image->control_code_page) {
 		printk(KERN_ERR "Could not allocate control_code_buffer\n");
 		goto out;
@@ -589,14 +601,12 @@ static void kimage_free_extra_pages(struct kimage *image)
 	kimage_free_page_list(&image->unuseable_pages);
 
 }
-static int kimage_terminate(struct kimage *image)
+static void kimage_terminate(struct kimage *image)
 {
 	if (*image->entry != 0)
 		image->entry++;
 
 	*image->entry = IND_DONE;
-
-	return 0;
 }
 
 #define for_each_kimage_entry(image, ptr, entry) \
@@ -914,19 +924,14 @@ static int kimage_load_segment(struct kimage *image,
  */
 struct kimage *kexec_image;
 struct kimage *kexec_crash_image;
-/*
- * A home grown binary mutex.
- * Nothing can wait so this mutex is safe to use
- * in interrupt context :)
- */
-static int kexec_lock;
+
+static DEFINE_MUTEX(kexec_mutex);
 
 asmlinkage long sys_kexec_load(unsigned long entry, unsigned long nr_segments,
 				struct kexec_segment __user *segments,
 				unsigned long flags)
 {
 	struct kimage **dest_image, *image;
-	int locked;
 	int result;
 
 	/* We only trust the superuser with rebooting the system. */
@@ -962,8 +967,7 @@ asmlinkage long sys_kexec_load(unsigned long entry, unsigned long nr_segments,
 	 *
 	 * KISS: always take the mutex.
 	 */
-	locked = xchg(&kexec_lock, 1);
-	if (locked)
+	if (!mutex_trylock(&kexec_mutex))
 		return -EBUSY;
 
 	dest_image = &kexec_image;
@@ -988,6 +992,8 @@ asmlinkage long sys_kexec_load(unsigned long entry, unsigned long nr_segments,
 		if (result)
 			goto out;
 
+		if (flags & KEXEC_PRESERVE_CONTEXT)
+			image->preserve_context = 1;
 		result = machine_kexec_prepare(image);
 		if (result)
 			goto out;
@@ -997,16 +1003,13 @@ asmlinkage long sys_kexec_load(unsigned long entry, unsigned long nr_segments,
 			if (result)
 				goto out;
 		}
-		result = kimage_terminate(image);
-		if (result)
-			goto out;
+		kimage_terminate(image);
 	}
 	/* Install the new kernel, and  Uninstall the old */
 	image = xchg(dest_image, image);
 
 out:
-	locked = xchg(&kexec_lock, 0); /* Release the mutex */
-	BUG_ON(!locked);
+	mutex_unlock(&kexec_mutex);
 	kimage_free(image);
 
 	return result;
@@ -1053,10 +1056,7 @@ asmlinkage long compat_sys_kexec_load(unsigned long entry,
 
 void crash_kexec(struct pt_regs *regs)
 {
-	int locked;
-
-
-	/* Take the kexec_lock here to prevent sys_kexec_load
+	/* Take the kexec_mutex here to prevent sys_kexec_load
 	 * running on one cpu from replacing the crash kernel
 	 * we are using after a panic on a different cpu.
 	 *
@@ -1064,8 +1064,7 @@ void crash_kexec(struct pt_regs *regs)
 	 * of memory the xchg(&kexec_crash_image) would be
 	 * sufficient.  But since I reuse the memory...
 	 */
-	locked = xchg(&kexec_lock, 1);
-	if (!locked) {
+	if (mutex_trylock(&kexec_mutex)) {
 		if (kexec_crash_image) {
 			struct pt_regs fixed_regs;
 			crash_setup_regs(&fixed_regs, regs);
@@ -1073,8 +1072,7 @@ void crash_kexec(struct pt_regs *regs)
 			machine_crash_shutdown(&fixed_regs);
 			machine_kexec(kexec_crash_image);
 		}
-		locked = xchg(&kexec_lock, 0);
-		BUG_ON(!locked);
+		mutex_unlock(&kexec_mutex);
 	}
 }
 
@@ -1415,3 +1413,79 @@ static int __init crash_save_vmcoreinfo_init(void)
 }
 
 module_init(crash_save_vmcoreinfo_init)
+
+/*
+ * Move into place and start executing a preloaded standalone
+ * executable.  If nothing was preloaded return an error.
+ */
+int kernel_kexec(void)
+{
+	int error = 0;
+
+	if (!mutex_trylock(&kexec_mutex))
+		return -EBUSY;
+	if (!kexec_image) {
+		error = -EINVAL;
+		goto Unlock;
+	}
+
+#ifdef CONFIG_KEXEC_JUMP
+	if (kexec_image->preserve_context) {
+		mutex_lock(&pm_mutex);
+		pm_prepare_console();
+		error = freeze_processes();
+		if (error) {
+			error = -EBUSY;
+			goto Restore_console;
+		}
+		suspend_console();
+		error = device_suspend(PMSG_FREEZE);
+		if (error)
+			goto Resume_console;
+		error = disable_nonboot_cpus();
+		if (error)
+			goto Resume_devices;
+		device_pm_lock();
+		local_irq_disable();
+		/* At this point, device_suspend() has been called,
+		 * but *not* device_power_down(). We *must*
+		 * device_power_down() now.  Otherwise, drivers for
+		 * some devices (e.g. interrupt controllers) become
+		 * desynchronized with the actual state of the
+		 * hardware at resume time, and evil weirdness ensues.
+		 */
+		error = device_power_down(PMSG_FREEZE);
+		if (error)
+			goto Enable_irqs;
+	} else
+#endif
+	{
+		kernel_restart_prepare(NULL);
+		printk(KERN_EMERG "Starting new kernel\n");
+		machine_shutdown();
+	}
+
+	machine_kexec(kexec_image);
+
+#ifdef CONFIG_KEXEC_JUMP
+	if (kexec_image->preserve_context) {
+		device_power_up(PMSG_RESTORE);
+ Enable_irqs:
+		local_irq_enable();
+		device_pm_unlock();
+		enable_nonboot_cpus();
+ Resume_devices:
+		device_resume(PMSG_RESTORE);
+ Resume_console:
+		resume_console();
+		thaw_processes();
+ Restore_console:
+		pm_restore_console();
+		mutex_unlock(&pm_mutex);
+	}
+#endif
+
+ Unlock:
+	mutex_unlock(&kexec_mutex);
+	return error;
+}
diff --git a/kernel/kgdb.c b/kernel/kgdb.c
index 3ec23c3ec97f..eaa21fc9ad1d 100644
--- a/kernel/kgdb.c
+++ b/kernel/kgdb.c
@@ -56,12 +56,14 @@
 
 static int kgdb_break_asap;
 
+#define KGDB_MAX_THREAD_QUERY 17
 struct kgdb_state {
 	int			ex_vector;
 	int			signo;
 	int			err_code;
 	int			cpu;
 	int			pass_exception;
+	unsigned long		thr_query;
 	unsigned long		threadid;
 	long			kgdb_usethreadid;
 	struct pt_regs		*linux_regs;
@@ -166,13 +168,6 @@ early_param("nokgdbroundup", opt_nokgdbroundup);
  * Weak aliases for breakpoint management,
  * can be overriden by architectures when needed:
  */
-int __weak kgdb_validate_break_address(unsigned long addr)
-{
-	char tmp_variable[BREAK_INSTR_SIZE];
-
-	return probe_kernel_read(tmp_variable, (char *)addr, BREAK_INSTR_SIZE);
-}
-
 int __weak kgdb_arch_set_breakpoint(unsigned long addr, char *saved_instr)
 {
 	int err;
@@ -191,6 +186,25 @@ int __weak kgdb_arch_remove_breakpoint(unsigned long addr, char *bundle)
 				  (char *)bundle, BREAK_INSTR_SIZE);
 }
 
+int __weak kgdb_validate_break_address(unsigned long addr)
+{
+	char tmp_variable[BREAK_INSTR_SIZE];
+	int err;
+	/* Validate setting the breakpoint and then removing it.  In the
+	 * remove fails, the kernel needs to emit a bad message because we
+	 * are deep trouble not being able to put things back the way we
+	 * found them.
+	 */
+	err = kgdb_arch_set_breakpoint(addr, tmp_variable);
+	if (err)
+		return err;
+	err = kgdb_arch_remove_breakpoint(addr, tmp_variable);
+	if (err)
+		printk(KERN_ERR "KGDB: Critical breakpoint error, kernel "
+		   "memory destroyed at: %lx", addr);
+	return err;
+}
+
 unsigned long __weak kgdb_arch_pc(int exception, struct pt_regs *regs)
 {
 	return instruction_pointer(regs);
@@ -433,9 +447,14 @@ int kgdb_hex2long(char **ptr, unsigned long *long_val)
 {
 	int hex_val;
 	int num = 0;
+	int negate = 0;
 
 	*long_val = 0;
 
+	if (**ptr == '-') {
+		negate = 1;
+		(*ptr)++;
+	}
 	while (**ptr) {
 		hex_val = hex(**ptr);
 		if (hex_val < 0)
@@ -446,6 +465,9 @@ int kgdb_hex2long(char **ptr, unsigned long *long_val)
 		(*ptr)++;
 	}
 
+	if (negate)
+		*long_val = -*long_val;
+
 	return num;
 }
 
@@ -515,10 +537,16 @@ static void int_to_threadref(unsigned char *id, int value)
 static struct task_struct *getthread(struct pt_regs *regs, int tid)
 {
 	/*
-	 * Non-positive TIDs are remapped idle tasks:
+	 * Non-positive TIDs are remapped to the cpu shadow information
 	 */
-	if (tid <= 0)
-		return idle_task(-tid);
+	if (tid == 0 || tid == -1)
+		tid = -atomic_read(&kgdb_active) - 2;
+	if (tid < 0) {
+		if (kgdb_info[-tid - 2].task)
+			return kgdb_info[-tid - 2].task;
+		else
+			return idle_task(-tid - 2);
+	}
 
 	/*
 	 * find_task_by_pid_ns() does not take the tasklist lock anymore
@@ -725,14 +753,15 @@ setundefined:
 }
 
 /*
- * Remap normal tasks to their real PID, idle tasks to -1 ... -NR_CPUs:
+ * Remap normal tasks to their real PID,
+ * CPU shadow threads are mapped to -CPU - 2
  */
 static inline int shadow_pid(int realpid)
 {
 	if (realpid)
 		return realpid;
 
-	return -1-raw_smp_processor_id();
+	return -raw_smp_processor_id() - 2;
 }
 
 static char gdbmsgbuf[BUFMAX + 1];
@@ -826,7 +855,7 @@ static void gdb_cmd_getregs(struct kgdb_state *ks)
 		local_debuggerinfo = kgdb_info[ks->cpu].debuggerinfo;
 	} else {
 		local_debuggerinfo = NULL;
-		for (i = 0; i < NR_CPUS; i++) {
+		for_each_online_cpu(i) {
 			/*
 			 * Try to find the task on some other
 			 * or possibly this node if we do not
@@ -960,10 +989,13 @@ static int gdb_cmd_reboot(struct kgdb_state *ks)
 /* Handle the 'q' query packets */
 static void gdb_cmd_query(struct kgdb_state *ks)
 {
-	struct task_struct *thread;
+	struct task_struct *g;
+	struct task_struct *p;
 	unsigned char thref[8];
 	char *ptr;
 	int i;
+	int cpu;
+	int finished = 0;
 
 	switch (remcom_in_buffer[1]) {
 	case 's':
@@ -973,22 +1005,34 @@ static void gdb_cmd_query(struct kgdb_state *ks)
 			break;
 		}
 
-		if (remcom_in_buffer[1] == 'f')
-			ks->threadid = 1;
-
+		i = 0;
 		remcom_out_buffer[0] = 'm';
 		ptr = remcom_out_buffer + 1;
-
-		for (i = 0; i < 17; ks->threadid++) {
-			thread = getthread(ks->linux_regs, ks->threadid);
-			if (thread) {
-				int_to_threadref(thref, ks->threadid);
+		if (remcom_in_buffer[1] == 'f') {
+			/* Each cpu is a shadow thread */
+			for_each_online_cpu(cpu) {
+				ks->thr_query = 0;
+				int_to_threadref(thref, -cpu - 2);
 				pack_threadid(ptr, thref);
 				ptr += BUF_THREAD_ID_SIZE;
 				*(ptr++) = ',';
 				i++;
 			}
 		}
+
+		do_each_thread(g, p) {
+			if (i >= ks->thr_query && !finished) {
+				int_to_threadref(thref, p->pid);
+				pack_threadid(ptr, thref);
+				ptr += BUF_THREAD_ID_SIZE;
+				*(ptr++) = ',';
+				ks->thr_query++;
+				if (ks->thr_query % KGDB_MAX_THREAD_QUERY == 0)
+					finished = 1;
+			}
+			i++;
+		} while_each_thread(g, p);
+
 		*(--ptr) = '\0';
 		break;
 
@@ -1011,15 +1055,15 @@ static void gdb_cmd_query(struct kgdb_state *ks)
 			error_packet(remcom_out_buffer, -EINVAL);
 			break;
 		}
-		if (ks->threadid > 0) {
+		if ((int)ks->threadid > 0) {
 			kgdb_mem2hex(getthread(ks->linux_regs,
 					ks->threadid)->comm,
 					remcom_out_buffer, 16);
 		} else {
 			static char tmpstr[23 + BUF_THREAD_ID_SIZE];
 
-			sprintf(tmpstr, "Shadow task %d for pid 0",
-					(int)(-ks->threadid-1));
+			sprintf(tmpstr, "shadowCPU%d",
+					(int)(-ks->threadid - 2));
 			kgdb_mem2hex(tmpstr, remcom_out_buffer, strlen(tmpstr));
 		}
 		break;
diff --git a/kernel/kmod.c b/kernel/kmod.c
index 2989f67c4446..2456d1a0befb 100644
--- a/kernel/kmod.c
+++ b/kernel/kmod.c
@@ -352,16 +352,17 @@ static inline void register_pm_notifier_callback(void) {}
  * @path: path to usermode executable
  * @argv: arg vector for process
  * @envp: environment for process
+ * @gfp_mask: gfp mask for memory allocation
  *
  * Returns either %NULL on allocation failure, or a subprocess_info
  * structure.  This should be passed to call_usermodehelper_exec to
  * exec the process and free the structure.
  */
-struct subprocess_info *call_usermodehelper_setup(char *path,
-						  char **argv, char **envp)
+struct subprocess_info *call_usermodehelper_setup(char *path, char **argv,
+						  char **envp, gfp_t gfp_mask)
 {
 	struct subprocess_info *sub_info;
-	sub_info = kzalloc(sizeof(struct subprocess_info),  GFP_ATOMIC);
+	sub_info = kzalloc(sizeof(struct subprocess_info), gfp_mask);
 	if (!sub_info)
 		goto out;
 
@@ -494,7 +495,7 @@ int call_usermodehelper_pipe(char *path, char **argv, char **envp,
 	struct subprocess_info *sub_info;
 	int ret;
 
-	sub_info = call_usermodehelper_setup(path, argv, envp);
+	sub_info = call_usermodehelper_setup(path, argv, envp, GFP_KERNEL);
 	if (sub_info == NULL)
 		return -ENOMEM;
 
diff --git a/kernel/kprobes.c b/kernel/kprobes.c
index 1485ca8d0e00..75bc2cd9ebc6 100644
--- a/kernel/kprobes.c
+++ b/kernel/kprobes.c
@@ -62,6 +62,7 @@
 	addr = ((kprobe_opcode_t *)(kallsyms_lookup_name(name)))
 #endif
 
+static int kprobes_initialized;
 static struct hlist_head kprobe_table[KPROBE_TABLE_SIZE];
 static struct hlist_head kretprobe_inst_table[KPROBE_TABLE_SIZE];
 
@@ -69,8 +70,15 @@ static struct hlist_head kretprobe_inst_table[KPROBE_TABLE_SIZE];
 static bool kprobe_enabled;
 
 DEFINE_MUTEX(kprobe_mutex);		/* Protects kprobe_table */
-DEFINE_SPINLOCK(kretprobe_lock);	/* Protects kretprobe_inst_table */
 static DEFINE_PER_CPU(struct kprobe *, kprobe_instance) = NULL;
+static struct {
+	spinlock_t lock ____cacheline_aligned;
+} kretprobe_table_locks[KPROBE_TABLE_SIZE];
+
+static spinlock_t *kretprobe_table_lock_ptr(unsigned long hash)
+{
+	return &(kretprobe_table_locks[hash].lock);
+}
 
 /*
  * Normally, functions that we'd want to prohibit kprobes in, are marked
@@ -368,26 +376,53 @@ void __kprobes kprobes_inc_nmissed_count(struct kprobe *p)
 	return;
 }
 
-/* Called with kretprobe_lock held */
 void __kprobes recycle_rp_inst(struct kretprobe_instance *ri,
 				struct hlist_head *head)
 {
+	struct kretprobe *rp = ri->rp;
+
 	/* remove rp inst off the rprobe_inst_table */
 	hlist_del(&ri->hlist);
-	if (ri->rp) {
-		/* remove rp inst off the used list */
-		hlist_del(&ri->uflist);
-		/* put rp inst back onto the free list */
-		INIT_HLIST_NODE(&ri->uflist);
-		hlist_add_head(&ri->uflist, &ri->rp->free_instances);
+	INIT_HLIST_NODE(&ri->hlist);
+	if (likely(rp)) {
+		spin_lock(&rp->lock);
+		hlist_add_head(&ri->hlist, &rp->free_instances);
+		spin_unlock(&rp->lock);
 	} else
 		/* Unregistering */
 		hlist_add_head(&ri->hlist, head);
 }
 
-struct hlist_head __kprobes *kretprobe_inst_table_head(struct task_struct *tsk)
+void kretprobe_hash_lock(struct task_struct *tsk,
+			 struct hlist_head **head, unsigned long *flags)
 {
-	return &kretprobe_inst_table[hash_ptr(tsk, KPROBE_HASH_BITS)];
+	unsigned long hash = hash_ptr(tsk, KPROBE_HASH_BITS);
+	spinlock_t *hlist_lock;
+
+	*head = &kretprobe_inst_table[hash];
+	hlist_lock = kretprobe_table_lock_ptr(hash);
+	spin_lock_irqsave(hlist_lock, *flags);
+}
+
+void kretprobe_table_lock(unsigned long hash, unsigned long *flags)
+{
+	spinlock_t *hlist_lock = kretprobe_table_lock_ptr(hash);
+	spin_lock_irqsave(hlist_lock, *flags);
+}
+
+void kretprobe_hash_unlock(struct task_struct *tsk, unsigned long *flags)
+{
+	unsigned long hash = hash_ptr(tsk, KPROBE_HASH_BITS);
+	spinlock_t *hlist_lock;
+
+	hlist_lock = kretprobe_table_lock_ptr(hash);
+	spin_unlock_irqrestore(hlist_lock, *flags);
+}
+
+void kretprobe_table_unlock(unsigned long hash, unsigned long *flags)
+{
+	spinlock_t *hlist_lock = kretprobe_table_lock_ptr(hash);
+	spin_unlock_irqrestore(hlist_lock, *flags);
 }
 
 /*
@@ -401,17 +436,21 @@ void __kprobes kprobe_flush_task(struct task_struct *tk)
 	struct kretprobe_instance *ri;
 	struct hlist_head *head, empty_rp;
 	struct hlist_node *node, *tmp;
-	unsigned long flags = 0;
+	unsigned long hash, flags = 0;
 
-	INIT_HLIST_HEAD(&empty_rp);
-	spin_lock_irqsave(&kretprobe_lock, flags);
-	head = kretprobe_inst_table_head(tk);
+	if (unlikely(!kprobes_initialized))
+		/* Early boot.  kretprobe_table_locks not yet initialized. */
+		return;
+
+	hash = hash_ptr(tk, KPROBE_HASH_BITS);
+	head = &kretprobe_inst_table[hash];
+	kretprobe_table_lock(hash, &flags);
 	hlist_for_each_entry_safe(ri, node, tmp, head, hlist) {
 		if (ri->task == tk)
 			recycle_rp_inst(ri, &empty_rp);
 	}
-	spin_unlock_irqrestore(&kretprobe_lock, flags);
-
+	kretprobe_table_unlock(hash, &flags);
+	INIT_HLIST_HEAD(&empty_rp);
 	hlist_for_each_entry_safe(ri, node, tmp, &empty_rp, hlist) {
 		hlist_del(&ri->hlist);
 		kfree(ri);
@@ -423,24 +462,29 @@ static inline void free_rp_inst(struct kretprobe *rp)
 	struct kretprobe_instance *ri;
 	struct hlist_node *pos, *next;
 
-	hlist_for_each_entry_safe(ri, pos, next, &rp->free_instances, uflist) {
-		hlist_del(&ri->uflist);
+	hlist_for_each_entry_safe(ri, pos, next, &rp->free_instances, hlist) {
+		hlist_del(&ri->hlist);
 		kfree(ri);
 	}
 }
 
 static void __kprobes cleanup_rp_inst(struct kretprobe *rp)
 {
-	unsigned long flags;
+	unsigned long flags, hash;
 	struct kretprobe_instance *ri;
 	struct hlist_node *pos, *next;
+	struct hlist_head *head;
+
 	/* No race here */
-	spin_lock_irqsave(&kretprobe_lock, flags);
-	hlist_for_each_entry_safe(ri, pos, next, &rp->used_instances, uflist) {
-		ri->rp = NULL;
-		hlist_del(&ri->uflist);
+	for (hash = 0; hash < KPROBE_TABLE_SIZE; hash++) {
+		kretprobe_table_lock(hash, &flags);
+		head = &kretprobe_inst_table[hash];
+		hlist_for_each_entry_safe(ri, pos, next, head, hlist) {
+			if (ri->rp == rp)
+				ri->rp = NULL;
+		}
+		kretprobe_table_unlock(hash, &flags);
 	}
-	spin_unlock_irqrestore(&kretprobe_lock, flags);
 	free_rp_inst(rp);
 }
 
@@ -831,32 +875,37 @@ static int __kprobes pre_handler_kretprobe(struct kprobe *p,
 					   struct pt_regs *regs)
 {
 	struct kretprobe *rp = container_of(p, struct kretprobe, kp);
-	unsigned long flags = 0;
+	unsigned long hash, flags = 0;
+	struct kretprobe_instance *ri;
 
 	/*TODO: consider to only swap the RA after the last pre_handler fired */
-	spin_lock_irqsave(&kretprobe_lock, flags);
+	hash = hash_ptr(current, KPROBE_HASH_BITS);
+	spin_lock_irqsave(&rp->lock, flags);
 	if (!hlist_empty(&rp->free_instances)) {
-		struct kretprobe_instance *ri;
-
 		ri = hlist_entry(rp->free_instances.first,
-				 struct kretprobe_instance, uflist);
+				struct kretprobe_instance, hlist);
+		hlist_del(&ri->hlist);
+		spin_unlock_irqrestore(&rp->lock, flags);
+
 		ri->rp = rp;
 		ri->task = current;
 
 		if (rp->entry_handler && rp->entry_handler(ri, regs)) {
-			spin_unlock_irqrestore(&kretprobe_lock, flags);
+			spin_unlock_irqrestore(&rp->lock, flags);
 			return 0;
 		}
 
 		arch_prepare_kretprobe(ri, regs);
 
 		/* XXX(hch): why is there no hlist_move_head? */
-		hlist_del(&ri->uflist);
-		hlist_add_head(&ri->uflist, &ri->rp->used_instances);
-		hlist_add_head(&ri->hlist, kretprobe_inst_table_head(ri->task));
-	} else
+		INIT_HLIST_NODE(&ri->hlist);
+		kretprobe_table_lock(hash, &flags);
+		hlist_add_head(&ri->hlist, &kretprobe_inst_table[hash]);
+		kretprobe_table_unlock(hash, &flags);
+	} else {
 		rp->nmissed++;
-	spin_unlock_irqrestore(&kretprobe_lock, flags);
+		spin_unlock_irqrestore(&rp->lock, flags);
+	}
 	return 0;
 }
 
@@ -892,7 +941,7 @@ static int __kprobes __register_kretprobe(struct kretprobe *rp,
 		rp->maxactive = NR_CPUS;
 #endif
 	}
-	INIT_HLIST_HEAD(&rp->used_instances);
+	spin_lock_init(&rp->lock);
 	INIT_HLIST_HEAD(&rp->free_instances);
 	for (i = 0; i < rp->maxactive; i++) {
 		inst = kmalloc(sizeof(struct kretprobe_instance) +
@@ -901,8 +950,8 @@ static int __kprobes __register_kretprobe(struct kretprobe *rp,
 			free_rp_inst(rp);
 			return -ENOMEM;
 		}
-		INIT_HLIST_NODE(&inst->uflist);
-		hlist_add_head(&inst->uflist, &rp->free_instances);
+		INIT_HLIST_NODE(&inst->hlist);
+		hlist_add_head(&inst->hlist, &rp->free_instances);
 	}
 
 	rp->nmissed = 0;
@@ -1009,6 +1058,7 @@ static int __init init_kprobes(void)
 	for (i = 0; i < KPROBE_TABLE_SIZE; i++) {
 		INIT_HLIST_HEAD(&kprobe_table[i]);
 		INIT_HLIST_HEAD(&kretprobe_inst_table[i]);
+		spin_lock_init(&(kretprobe_table_locks[i].lock));
 	}
 
 	/*
@@ -1050,6 +1100,7 @@ static int __init init_kprobes(void)
 	err = arch_init_kprobes();
 	if (!err)
 		err = register_die_notifier(&kprobe_exceptions_nb);
+	kprobes_initialized = (err == 0);
 
 	if (!err)
 		init_test_probes();
@@ -1286,13 +1337,8 @@ EXPORT_SYMBOL_GPL(register_jprobe);
 EXPORT_SYMBOL_GPL(unregister_jprobe);
 EXPORT_SYMBOL_GPL(register_jprobes);
 EXPORT_SYMBOL_GPL(unregister_jprobes);
-#ifdef CONFIG_KPROBES
 EXPORT_SYMBOL_GPL(jprobe_return);
-#endif
-
-#ifdef CONFIG_KPROBES
 EXPORT_SYMBOL_GPL(register_kretprobe);
 EXPORT_SYMBOL_GPL(unregister_kretprobe);
 EXPORT_SYMBOL_GPL(register_kretprobes);
 EXPORT_SYMBOL_GPL(unregister_kretprobes);
-#endif
diff --git a/kernel/kthread.c b/kernel/kthread.c
index 6111c27491b1..96cff2f8710b 100644
--- a/kernel/kthread.c
+++ b/kernel/kthread.c
@@ -176,7 +176,7 @@ void kthread_bind(struct task_struct *k, unsigned int cpu)
 		return;
 	}
 	/* Must have done schedule() in kthread() before we set_task_cpu */
-	wait_task_inactive(k);
+	wait_task_inactive(k, 0);
 	set_task_cpu(k, cpu);
 	k->cpus_allowed = cpumask_of_cpu(cpu);
 	k->rt.nr_cpus_allowed = 1;
diff --git a/kernel/lockdep.c b/kernel/lockdep.c
index d38a64362973..dbda475b13bd 100644
--- a/kernel/lockdep.c
+++ b/kernel/lockdep.c
@@ -124,6 +124,15 @@ static struct lock_list list_entries[MAX_LOCKDEP_ENTRIES];
 unsigned long nr_lock_classes;
 static struct lock_class lock_classes[MAX_LOCKDEP_KEYS];
 
+static inline struct lock_class *hlock_class(struct held_lock *hlock)
+{
+	if (!hlock->class_idx) {
+		DEBUG_LOCKS_WARN_ON(1);
+		return NULL;
+	}
+	return lock_classes + hlock->class_idx - 1;
+}
+
 #ifdef CONFIG_LOCK_STAT
 static DEFINE_PER_CPU(struct lock_class_stats[MAX_LOCKDEP_KEYS], lock_stats);
 
@@ -222,7 +231,7 @@ static void lock_release_holdtime(struct held_lock *hlock)
 
 	holdtime = sched_clock() - hlock->holdtime_stamp;
 
-	stats = get_lock_stats(hlock->class);
+	stats = get_lock_stats(hlock_class(hlock));
 	if (hlock->read)
 		lock_time_inc(&stats->read_holdtime, holdtime);
 	else
@@ -372,6 +381,19 @@ unsigned int nr_process_chains;
 unsigned int max_lockdep_depth;
 unsigned int max_recursion_depth;
 
+static unsigned int lockdep_dependency_gen_id;
+
+static bool lockdep_dependency_visit(struct lock_class *source,
+				     unsigned int depth)
+{
+	if (!depth)
+		lockdep_dependency_gen_id++;
+	if (source->dep_gen_id == lockdep_dependency_gen_id)
+		return true;
+	source->dep_gen_id = lockdep_dependency_gen_id;
+	return false;
+}
+
 #ifdef CONFIG_DEBUG_LOCKDEP
 /*
  * We cannot printk in early bootup code. Not even early_printk()
@@ -505,7 +527,7 @@ static void print_lockdep_cache(struct lockdep_map *lock)
 
 static void print_lock(struct held_lock *hlock)
 {
-	print_lock_name(hlock->class);
+	print_lock_name(hlock_class(hlock));
 	printk(", at: ");
 	print_ip_sym(hlock->acquire_ip);
 }
@@ -558,6 +580,9 @@ static void print_lock_dependencies(struct lock_class *class, int depth)
 {
 	struct lock_list *entry;
 
+	if (lockdep_dependency_visit(class, depth))
+		return;
+
 	if (DEBUG_LOCKS_WARN_ON(depth >= 20))
 		return;
 
@@ -850,11 +875,11 @@ static int add_lock_to_list(struct lock_class *class, struct lock_class *this,
 	if (!entry)
 		return 0;
 
-	entry->class = this;
-	entry->distance = distance;
 	if (!save_trace(&entry->trace))
 		return 0;
 
+	entry->class = this;
+	entry->distance = distance;
 	/*
 	 * Since we never remove from the dependency list, the list can
 	 * be walked lockless by other CPUs, it's only allocation
@@ -932,7 +957,7 @@ static noinline int print_circular_bug_tail(void)
 	if (debug_locks_silent)
 		return 0;
 
-	this.class = check_source->class;
+	this.class = hlock_class(check_source);
 	if (!save_trace(&this.trace))
 		return 0;
 
@@ -959,6 +984,67 @@ static int noinline print_infinite_recursion_bug(void)
 	return 0;
 }
 
+unsigned long __lockdep_count_forward_deps(struct lock_class *class,
+					   unsigned int depth)
+{
+	struct lock_list *entry;
+	unsigned long ret = 1;
+
+	if (lockdep_dependency_visit(class, depth))
+		return 0;
+
+	/*
+	 * Recurse this class's dependency list:
+	 */
+	list_for_each_entry(entry, &class->locks_after, entry)
+		ret += __lockdep_count_forward_deps(entry->class, depth + 1);
+
+	return ret;
+}
+
+unsigned long lockdep_count_forward_deps(struct lock_class *class)
+{
+	unsigned long ret, flags;
+
+	local_irq_save(flags);
+	__raw_spin_lock(&lockdep_lock);
+	ret = __lockdep_count_forward_deps(class, 0);
+	__raw_spin_unlock(&lockdep_lock);
+	local_irq_restore(flags);
+
+	return ret;
+}
+
+unsigned long __lockdep_count_backward_deps(struct lock_class *class,
+					    unsigned int depth)
+{
+	struct lock_list *entry;
+	unsigned long ret = 1;
+
+	if (lockdep_dependency_visit(class, depth))
+		return 0;
+	/*
+	 * Recurse this class's dependency list:
+	 */
+	list_for_each_entry(entry, &class->locks_before, entry)
+		ret += __lockdep_count_backward_deps(entry->class, depth + 1);
+
+	return ret;
+}
+
+unsigned long lockdep_count_backward_deps(struct lock_class *class)
+{
+	unsigned long ret, flags;
+
+	local_irq_save(flags);
+	__raw_spin_lock(&lockdep_lock);
+	ret = __lockdep_count_backward_deps(class, 0);
+	__raw_spin_unlock(&lockdep_lock);
+	local_irq_restore(flags);
+
+	return ret;
+}
+
 /*
  * Prove that the dependency graph starting at <entry> can not
  * lead to <target>. Print an error and return 0 if it does.
@@ -968,6 +1054,9 @@ check_noncircular(struct lock_class *source, unsigned int depth)
 {
 	struct lock_list *entry;
 
+	if (lockdep_dependency_visit(source, depth))
+		return 1;
+
 	debug_atomic_inc(&nr_cyclic_check_recursions);
 	if (depth > max_recursion_depth)
 		max_recursion_depth = depth;
@@ -977,7 +1066,7 @@ check_noncircular(struct lock_class *source, unsigned int depth)
 	 * Check this lock's dependency list:
 	 */
 	list_for_each_entry(entry, &source->locks_after, entry) {
-		if (entry->class == check_target->class)
+		if (entry->class == hlock_class(check_target))
 			return print_circular_bug_header(entry, depth+1);
 		debug_atomic_inc(&nr_cyclic_checks);
 		if (!check_noncircular(entry->class, depth+1))
@@ -1011,6 +1100,9 @@ find_usage_forwards(struct lock_class *source, unsigned int depth)
 	struct lock_list *entry;
 	int ret;
 
+	if (lockdep_dependency_visit(source, depth))
+		return 1;
+
 	if (depth > max_recursion_depth)
 		max_recursion_depth = depth;
 	if (depth >= RECURSION_LIMIT)
@@ -1050,6 +1142,9 @@ find_usage_backwards(struct lock_class *source, unsigned int depth)
 	struct lock_list *entry;
 	int ret;
 
+	if (lockdep_dependency_visit(source, depth))
+		return 1;
+
 	if (!__raw_spin_is_locked(&lockdep_lock))
 		return DEBUG_LOCKS_WARN_ON(1);
 
@@ -1064,6 +1159,11 @@ find_usage_backwards(struct lock_class *source, unsigned int depth)
 		return 2;
 	}
 
+	if (!source && debug_locks_off_graph_unlock()) {
+		WARN_ON(1);
+		return 0;
+	}
+
 	/*
 	 * Check this lock's dependency list:
 	 */
@@ -1103,9 +1203,9 @@ print_bad_irq_dependency(struct task_struct *curr,
 	printk("\nand this task is already holding:\n");
 	print_lock(prev);
 	printk("which would create a new lock dependency:\n");
-	print_lock_name(prev->class);
+	print_lock_name(hlock_class(prev));
 	printk(" ->");
-	print_lock_name(next->class);
+	print_lock_name(hlock_class(next));
 	printk("\n");
 
 	printk("\nbut this new dependency connects a %s-irq-safe lock:\n",
@@ -1146,12 +1246,12 @@ check_usage(struct task_struct *curr, struct held_lock *prev,
 
 	find_usage_bit = bit_backwards;
 	/* fills in <backwards_match> */
-	ret = find_usage_backwards(prev->class, 0);
+	ret = find_usage_backwards(hlock_class(prev), 0);
 	if (!ret || ret == 1)
 		return ret;
 
 	find_usage_bit = bit_forwards;
-	ret = find_usage_forwards(next->class, 0);
+	ret = find_usage_forwards(hlock_class(next), 0);
 	if (!ret || ret == 1)
 		return ret;
 	/* ret == 2 */
@@ -1272,18 +1372,32 @@ check_deadlock(struct task_struct *curr, struct held_lock *next,
 	       struct lockdep_map *next_instance, int read)
 {
 	struct held_lock *prev;
+	struct held_lock *nest = NULL;
 	int i;
 
 	for (i = 0; i < curr->lockdep_depth; i++) {
 		prev = curr->held_locks + i;
-		if (prev->class != next->class)
+
+		if (prev->instance == next->nest_lock)
+			nest = prev;
+
+		if (hlock_class(prev) != hlock_class(next))
 			continue;
+
 		/*
 		 * Allow read-after-read recursion of the same
 		 * lock class (i.e. read_lock(lock)+read_lock(lock)):
 		 */
 		if ((read == 2) && prev->read)
 			return 2;
+
+		/*
+		 * We're holding the nest_lock, which serializes this lock's
+		 * nesting behaviour.
+		 */
+		if (nest)
+			return 2;
+
 		return print_deadlock_bug(curr, prev, next);
 	}
 	return 1;
@@ -1329,7 +1443,7 @@ check_prev_add(struct task_struct *curr, struct held_lock *prev,
 	 */
 	check_source = next;
 	check_target = prev;
-	if (!(check_noncircular(next->class, 0)))
+	if (!(check_noncircular(hlock_class(next), 0)))
 		return print_circular_bug_tail();
 
 	if (!check_prev_add_irq(curr, prev, next))
@@ -1353,8 +1467,8 @@ check_prev_add(struct task_struct *curr, struct held_lock *prev,
 	 *  chains - the second one will be new, but L1 already has
 	 *  L2 added to its dependency list, due to the first chain.)
 	 */
-	list_for_each_entry(entry, &prev->class->locks_after, entry) {
-		if (entry->class == next->class) {
+	list_for_each_entry(entry, &hlock_class(prev)->locks_after, entry) {
+		if (entry->class == hlock_class(next)) {
 			if (distance == 1)
 				entry->distance = 1;
 			return 2;
@@ -1365,26 +1479,28 @@ check_prev_add(struct task_struct *curr, struct held_lock *prev,
 	 * Ok, all validations passed, add the new lock
 	 * to the previous lock's dependency list:
 	 */
-	ret = add_lock_to_list(prev->class, next->class,
-			       &prev->class->locks_after, next->acquire_ip, distance);
+	ret = add_lock_to_list(hlock_class(prev), hlock_class(next),
+			       &hlock_class(prev)->locks_after,
+			       next->acquire_ip, distance);
 
 	if (!ret)
 		return 0;
 
-	ret = add_lock_to_list(next->class, prev->class,
-			       &next->class->locks_before, next->acquire_ip, distance);
+	ret = add_lock_to_list(hlock_class(next), hlock_class(prev),
+			       &hlock_class(next)->locks_before,
+			       next->acquire_ip, distance);
 	if (!ret)
 		return 0;
 
 	/*
 	 * Debugging printouts:
 	 */
-	if (verbose(prev->class) || verbose(next->class)) {
+	if (verbose(hlock_class(prev)) || verbose(hlock_class(next))) {
 		graph_unlock();
 		printk("\n new dependency: ");
-		print_lock_name(prev->class);
+		print_lock_name(hlock_class(prev));
 		printk(" => ");
-		print_lock_name(next->class);
+		print_lock_name(hlock_class(next));
 		printk("\n");
 		dump_stack();
 		return graph_lock();
@@ -1481,7 +1597,7 @@ static inline int lookup_chain_cache(struct task_struct *curr,
 				     struct held_lock *hlock,
 				     u64 chain_key)
 {
-	struct lock_class *class = hlock->class;
+	struct lock_class *class = hlock_class(hlock);
 	struct list_head *hash_head = chainhashentry(chain_key);
 	struct lock_chain *chain;
 	struct held_lock *hlock_curr, *hlock_next;
@@ -1554,7 +1670,7 @@ cache_hit:
 	if (likely(cn + chain->depth <= MAX_LOCKDEP_CHAIN_HLOCKS)) {
 		chain->base = cn;
 		for (j = 0; j < chain->depth - 1; j++, i++) {
-			int lock_id = curr->held_locks[i].class - lock_classes;
+			int lock_id = curr->held_locks[i].class_idx - 1;
 			chain_hlocks[chain->base + j] = lock_id;
 		}
 		chain_hlocks[chain->base + j] = class - lock_classes;
@@ -1643,14 +1759,13 @@ static void check_chain_key(struct task_struct *curr)
 		hlock = curr->held_locks + i;
 		if (chain_key != hlock->prev_chain_key) {
 			debug_locks_off();
-			printk("hm#1, depth: %u [%u], %016Lx != %016Lx\n",
+			WARN(1, "hm#1, depth: %u [%u], %016Lx != %016Lx\n",
 				curr->lockdep_depth, i,
 				(unsigned long long)chain_key,
 				(unsigned long long)hlock->prev_chain_key);
-			WARN_ON(1);
 			return;
 		}
-		id = hlock->class - lock_classes;
+		id = hlock->class_idx - 1;
 		if (DEBUG_LOCKS_WARN_ON(id >= MAX_LOCKDEP_KEYS))
 			return;
 
@@ -1662,11 +1777,10 @@ static void check_chain_key(struct task_struct *curr)
 	}
 	if (chain_key != curr->curr_chain_key) {
 		debug_locks_off();
-		printk("hm#2, depth: %u [%u], %016Lx != %016Lx\n",
+		WARN(1, "hm#2, depth: %u [%u], %016Lx != %016Lx\n",
 			curr->lockdep_depth, i,
 			(unsigned long long)chain_key,
 			(unsigned long long)curr->curr_chain_key);
-		WARN_ON(1);
 	}
 #endif
 }
@@ -1695,7 +1809,7 @@ print_usage_bug(struct task_struct *curr, struct held_lock *this,
 	print_lock(this);
 
 	printk("{%s} state was registered at:\n", usage_str[prev_bit]);
-	print_stack_trace(this->class->usage_traces + prev_bit, 1);
+	print_stack_trace(hlock_class(this)->usage_traces + prev_bit, 1);
 
 	print_irqtrace_events(curr);
 	printk("\nother info that might help us debug this:\n");
@@ -1714,7 +1828,7 @@ static inline int
 valid_state(struct task_struct *curr, struct held_lock *this,
 	    enum lock_usage_bit new_bit, enum lock_usage_bit bad_bit)
 {
-	if (unlikely(this->class->usage_mask & (1 << bad_bit)))
+	if (unlikely(hlock_class(this)->usage_mask & (1 << bad_bit)))
 		return print_usage_bug(curr, this, bad_bit, new_bit);
 	return 1;
 }
@@ -1753,7 +1867,7 @@ print_irq_inversion_bug(struct task_struct *curr, struct lock_class *other,
 	lockdep_print_held_locks(curr);
 
 	printk("\nthe first lock's dependencies:\n");
-	print_lock_dependencies(this->class, 0);
+	print_lock_dependencies(hlock_class(this), 0);
 
 	printk("\nthe second lock's dependencies:\n");
 	print_lock_dependencies(other, 0);
@@ -1776,7 +1890,7 @@ check_usage_forwards(struct task_struct *curr, struct held_lock *this,
 
 	find_usage_bit = bit;
 	/* fills in <forwards_match> */
-	ret = find_usage_forwards(this->class, 0);
+	ret = find_usage_forwards(hlock_class(this), 0);
 	if (!ret || ret == 1)
 		return ret;
 
@@ -1795,7 +1909,7 @@ check_usage_backwards(struct task_struct *curr, struct held_lock *this,
 
 	find_usage_bit = bit;
 	/* fills in <backwards_match> */
-	ret = find_usage_backwards(this->class, 0);
+	ret = find_usage_backwards(hlock_class(this), 0);
 	if (!ret || ret == 1)
 		return ret;
 
@@ -1861,7 +1975,7 @@ static int mark_lock_irq(struct task_struct *curr, struct held_lock *this,
 				LOCK_ENABLED_HARDIRQS_READ, "hard-read"))
 			return 0;
 #endif
-		if (hardirq_verbose(this->class))
+		if (hardirq_verbose(hlock_class(this)))
 			ret = 2;
 		break;
 	case LOCK_USED_IN_SOFTIRQ:
@@ -1886,7 +2000,7 @@ static int mark_lock_irq(struct task_struct *curr, struct held_lock *this,
 				LOCK_ENABLED_SOFTIRQS_READ, "soft-read"))
 			return 0;
 #endif
-		if (softirq_verbose(this->class))
+		if (softirq_verbose(hlock_class(this)))
 			ret = 2;
 		break;
 	case LOCK_USED_IN_HARDIRQ_READ:
@@ -1899,7 +2013,7 @@ static int mark_lock_irq(struct task_struct *curr, struct held_lock *this,
 		if (!check_usage_forwards(curr, this,
 					  LOCK_ENABLED_HARDIRQS, "hard"))
 			return 0;
-		if (hardirq_verbose(this->class))
+		if (hardirq_verbose(hlock_class(this)))
 			ret = 2;
 		break;
 	case LOCK_USED_IN_SOFTIRQ_READ:
@@ -1912,7 +2026,7 @@ static int mark_lock_irq(struct task_struct *curr, struct held_lock *this,
 		if (!check_usage_forwards(curr, this,
 					  LOCK_ENABLED_SOFTIRQS, "soft"))
 			return 0;
-		if (softirq_verbose(this->class))
+		if (softirq_verbose(hlock_class(this)))
 			ret = 2;
 		break;
 	case LOCK_ENABLED_HARDIRQS:
@@ -1938,7 +2052,7 @@ static int mark_lock_irq(struct task_struct *curr, struct held_lock *this,
 				   LOCK_USED_IN_HARDIRQ_READ, "hard-read"))
 			return 0;
 #endif
-		if (hardirq_verbose(this->class))
+		if (hardirq_verbose(hlock_class(this)))
 			ret = 2;
 		break;
 	case LOCK_ENABLED_SOFTIRQS:
@@ -1964,7 +2078,7 @@ static int mark_lock_irq(struct task_struct *curr, struct held_lock *this,
 				   LOCK_USED_IN_SOFTIRQ_READ, "soft-read"))
 			return 0;
 #endif
-		if (softirq_verbose(this->class))
+		if (softirq_verbose(hlock_class(this)))
 			ret = 2;
 		break;
 	case LOCK_ENABLED_HARDIRQS_READ:
@@ -1979,7 +2093,7 @@ static int mark_lock_irq(struct task_struct *curr, struct held_lock *this,
 					   LOCK_USED_IN_HARDIRQ, "hard"))
 			return 0;
 #endif
-		if (hardirq_verbose(this->class))
+		if (hardirq_verbose(hlock_class(this)))
 			ret = 2;
 		break;
 	case LOCK_ENABLED_SOFTIRQS_READ:
@@ -1994,7 +2108,7 @@ static int mark_lock_irq(struct task_struct *curr, struct held_lock *this,
 					   LOCK_USED_IN_SOFTIRQ, "soft"))
 			return 0;
 #endif
-		if (softirq_verbose(this->class))
+		if (softirq_verbose(hlock_class(this)))
 			ret = 2;
 		break;
 	default:
@@ -2310,7 +2424,7 @@ static int mark_lock(struct task_struct *curr, struct held_lock *this,
 	 * If already set then do not dirty the cacheline,
 	 * nor do any checks:
 	 */
-	if (likely(this->class->usage_mask & new_mask))
+	if (likely(hlock_class(this)->usage_mask & new_mask))
 		return 1;
 
 	if (!graph_lock())
@@ -2318,14 +2432,14 @@ static int mark_lock(struct task_struct *curr, struct held_lock *this,
 	/*
 	 * Make sure we didnt race:
 	 */
-	if (unlikely(this->class->usage_mask & new_mask)) {
+	if (unlikely(hlock_class(this)->usage_mask & new_mask)) {
 		graph_unlock();
 		return 1;
 	}
 
-	this->class->usage_mask |= new_mask;
+	hlock_class(this)->usage_mask |= new_mask;
 
-	if (!save_trace(this->class->usage_traces + new_bit))
+	if (!save_trace(hlock_class(this)->usage_traces + new_bit))
 		return 0;
 
 	switch (new_bit) {
@@ -2405,7 +2519,7 @@ EXPORT_SYMBOL_GPL(lockdep_init_map);
  */
 static int __lock_acquire(struct lockdep_map *lock, unsigned int subclass,
 			  int trylock, int read, int check, int hardirqs_off,
-			  unsigned long ip)
+			  struct lockdep_map *nest_lock, unsigned long ip)
 {
 	struct task_struct *curr = current;
 	struct lock_class *class = NULL;
@@ -2459,14 +2573,16 @@ static int __lock_acquire(struct lockdep_map *lock, unsigned int subclass,
 		return 0;
 
 	hlock = curr->held_locks + depth;
-
-	hlock->class = class;
+	if (DEBUG_LOCKS_WARN_ON(!class))
+		return 0;
+	hlock->class_idx = class - lock_classes + 1;
 	hlock->acquire_ip = ip;
 	hlock->instance = lock;
+	hlock->nest_lock = nest_lock;
 	hlock->trylock = trylock;
 	hlock->read = read;
 	hlock->check = check;
-	hlock->hardirqs_off = hardirqs_off;
+	hlock->hardirqs_off = !!hardirqs_off;
 #ifdef CONFIG_LOCK_STAT
 	hlock->waittime_stamp = 0;
 	hlock->holdtime_stamp = sched_clock();
@@ -2574,6 +2690,55 @@ static int check_unlock(struct task_struct *curr, struct lockdep_map *lock,
 	return 1;
 }
 
+static int
+__lock_set_subclass(struct lockdep_map *lock,
+		    unsigned int subclass, unsigned long ip)
+{
+	struct task_struct *curr = current;
+	struct held_lock *hlock, *prev_hlock;
+	struct lock_class *class;
+	unsigned int depth;
+	int i;
+
+	depth = curr->lockdep_depth;
+	if (DEBUG_LOCKS_WARN_ON(!depth))
+		return 0;
+
+	prev_hlock = NULL;
+	for (i = depth-1; i >= 0; i--) {
+		hlock = curr->held_locks + i;
+		/*
+		 * We must not cross into another context:
+		 */
+		if (prev_hlock && prev_hlock->irq_context != hlock->irq_context)
+			break;
+		if (hlock->instance == lock)
+			goto found_it;
+		prev_hlock = hlock;
+	}
+	return print_unlock_inbalance_bug(curr, lock, ip);
+
+found_it:
+	class = register_lock_class(lock, subclass, 0);
+	hlock->class_idx = class - lock_classes + 1;
+
+	curr->lockdep_depth = i;
+	curr->curr_chain_key = hlock->prev_chain_key;
+
+	for (; i < depth; i++) {
+		hlock = curr->held_locks + i;
+		if (!__lock_acquire(hlock->instance,
+			hlock_class(hlock)->subclass, hlock->trylock,
+				hlock->read, hlock->check, hlock->hardirqs_off,
+				hlock->nest_lock, hlock->acquire_ip))
+			return 0;
+	}
+
+	if (DEBUG_LOCKS_WARN_ON(curr->lockdep_depth != depth))
+		return 0;
+	return 1;
+}
+
 /*
  * Remove the lock to the list of currently held locks in a
  * potentially non-nested (out of order) manner. This is a
@@ -2624,9 +2789,9 @@ found_it:
 	for (i++; i < depth; i++) {
 		hlock = curr->held_locks + i;
 		if (!__lock_acquire(hlock->instance,
-			hlock->class->subclass, hlock->trylock,
+			hlock_class(hlock)->subclass, hlock->trylock,
 				hlock->read, hlock->check, hlock->hardirqs_off,
-				hlock->acquire_ip))
+				hlock->nest_lock, hlock->acquire_ip))
 			return 0;
 	}
 
@@ -2669,7 +2834,7 @@ static int lock_release_nested(struct task_struct *curr,
 
 #ifdef CONFIG_DEBUG_LOCKDEP
 	hlock->prev_chain_key = 0;
-	hlock->class = NULL;
+	hlock->class_idx = 0;
 	hlock->acquire_ip = 0;
 	hlock->irq_context = 0;
 #endif
@@ -2738,18 +2903,36 @@ static void check_flags(unsigned long flags)
 #endif
 }
 
+void
+lock_set_subclass(struct lockdep_map *lock,
+		  unsigned int subclass, unsigned long ip)
+{
+	unsigned long flags;
+
+	if (unlikely(current->lockdep_recursion))
+		return;
+
+	raw_local_irq_save(flags);
+	current->lockdep_recursion = 1;
+	check_flags(flags);
+	if (__lock_set_subclass(lock, subclass, ip))
+		check_chain_key(current);
+	current->lockdep_recursion = 0;
+	raw_local_irq_restore(flags);
+}
+
+EXPORT_SYMBOL_GPL(lock_set_subclass);
+
 /*
  * We are not always called with irqs disabled - do that here,
  * and also avoid lockdep recursion:
  */
 void lock_acquire(struct lockdep_map *lock, unsigned int subclass,
-			  int trylock, int read, int check, unsigned long ip)
+			  int trylock, int read, int check,
+			  struct lockdep_map *nest_lock, unsigned long ip)
 {
 	unsigned long flags;
 
-	if (unlikely(!lock_stat && !prove_locking))
-		return;
-
 	if (unlikely(current->lockdep_recursion))
 		return;
 
@@ -2758,7 +2941,7 @@ void lock_acquire(struct lockdep_map *lock, unsigned int subclass,
 
 	current->lockdep_recursion = 1;
 	__lock_acquire(lock, subclass, trylock, read, check,
-		       irqs_disabled_flags(flags), ip);
+		       irqs_disabled_flags(flags), nest_lock, ip);
 	current->lockdep_recursion = 0;
 	raw_local_irq_restore(flags);
 }
@@ -2770,9 +2953,6 @@ void lock_release(struct lockdep_map *lock, int nested,
 {
 	unsigned long flags;
 
-	if (unlikely(!lock_stat && !prove_locking))
-		return;
-
 	if (unlikely(current->lockdep_recursion))
 		return;
 
@@ -2845,11 +3025,11 @@ __lock_contended(struct lockdep_map *lock, unsigned long ip)
 found_it:
 	hlock->waittime_stamp = sched_clock();
 
-	point = lock_contention_point(hlock->class, ip);
+	point = lock_contention_point(hlock_class(hlock), ip);
 
-	stats = get_lock_stats(hlock->class);
+	stats = get_lock_stats(hlock_class(hlock));
 	if (point < ARRAY_SIZE(stats->contention_point))
-		stats->contention_point[i]++;
+		stats->contention_point[point]++;
 	if (lock->cpu != smp_processor_id())
 		stats->bounces[bounce_contended + !!hlock->read]++;
 	put_lock_stats(stats);
@@ -2893,7 +3073,7 @@ found_it:
 		hlock->holdtime_stamp = now;
 	}
 
-	stats = get_lock_stats(hlock->class);
+	stats = get_lock_stats(hlock_class(hlock));
 	if (waittime) {
 		if (hlock->read)
 			lock_time_inc(&stats->read_waittime, waittime);
@@ -2988,6 +3168,7 @@ static void zap_class(struct lock_class *class)
 	list_del_rcu(&class->hash_entry);
 	list_del_rcu(&class->lock_entry);
 
+	class->key = NULL;
 }
 
 static inline int within(const void *addr, void *start, unsigned long size)
diff --git a/kernel/lockdep_internals.h b/kernel/lockdep_internals.h
index c3600a091a28..56b196932c08 100644
--- a/kernel/lockdep_internals.h
+++ b/kernel/lockdep_internals.h
@@ -17,9 +17,6 @@
  */
 #define MAX_LOCKDEP_ENTRIES	8192UL
 
-#define MAX_LOCKDEP_KEYS_BITS	11
-#define MAX_LOCKDEP_KEYS	(1UL << MAX_LOCKDEP_KEYS_BITS)
-
 #define MAX_LOCKDEP_CHAINS_BITS	14
 #define MAX_LOCKDEP_CHAINS	(1UL << MAX_LOCKDEP_CHAINS_BITS)
 
@@ -53,6 +50,22 @@ extern unsigned int nr_process_chains;
 extern unsigned int max_lockdep_depth;
 extern unsigned int max_recursion_depth;
 
+#ifdef CONFIG_PROVE_LOCKING
+extern unsigned long lockdep_count_forward_deps(struct lock_class *);
+extern unsigned long lockdep_count_backward_deps(struct lock_class *);
+#else
+static inline unsigned long
+lockdep_count_forward_deps(struct lock_class *class)
+{
+	return 0;
+}
+static inline unsigned long
+lockdep_count_backward_deps(struct lock_class *class)
+{
+	return 0;
+}
+#endif
+
 #ifdef CONFIG_DEBUG_LOCKDEP
 /*
  * Various lockdep statistics:
diff --git a/kernel/lockdep_proc.c b/kernel/lockdep_proc.c
index 9b0e940e2545..20dbcbf9c7dd 100644
--- a/kernel/lockdep_proc.c
+++ b/kernel/lockdep_proc.c
@@ -63,34 +63,6 @@ static void l_stop(struct seq_file *m, void *v)
 {
 }
 
-static unsigned long count_forward_deps(struct lock_class *class)
-{
-	struct lock_list *entry;
-	unsigned long ret = 1;
-
-	/*
-	 * Recurse this class's dependency list:
-	 */
-	list_for_each_entry(entry, &class->locks_after, entry)
-		ret += count_forward_deps(entry->class);
-
-	return ret;
-}
-
-static unsigned long count_backward_deps(struct lock_class *class)
-{
-	struct lock_list *entry;
-	unsigned long ret = 1;
-
-	/*
-	 * Recurse this class's dependency list:
-	 */
-	list_for_each_entry(entry, &class->locks_before, entry)
-		ret += count_backward_deps(entry->class);
-
-	return ret;
-}
-
 static void print_name(struct seq_file *m, struct lock_class *class)
 {
 	char str[128];
@@ -110,7 +82,6 @@ static void print_name(struct seq_file *m, struct lock_class *class)
 
 static int l_show(struct seq_file *m, void *v)
 {
-	unsigned long nr_forward_deps, nr_backward_deps;
 	struct lock_class *class = v;
 	struct lock_list *entry;
 	char c1, c2, c3, c4;
@@ -124,11 +95,10 @@ static int l_show(struct seq_file *m, void *v)
 #ifdef CONFIG_DEBUG_LOCKDEP
 	seq_printf(m, " OPS:%8ld", class->ops);
 #endif
-	nr_forward_deps = count_forward_deps(class);
-	seq_printf(m, " FD:%5ld", nr_forward_deps);
-
-	nr_backward_deps = count_backward_deps(class);
-	seq_printf(m, " BD:%5ld", nr_backward_deps);
+#ifdef CONFIG_PROVE_LOCKING
+	seq_printf(m, " FD:%5ld", lockdep_count_forward_deps(class));
+	seq_printf(m, " BD:%5ld", lockdep_count_backward_deps(class));
+#endif
 
 	get_usage_chars(class, &c1, &c2, &c3, &c4);
 	seq_printf(m, " %c%c%c%c", c1, c2, c3, c4);
@@ -229,6 +199,9 @@ static int lc_show(struct seq_file *m, void *v)
 
 	for (i = 0; i < chain->depth; i++) {
 		class = lock_chain_get_class(chain, i);
+		if (!class->key)
+			continue;
+
 		seq_printf(m, "[%p] ", class->key);
 		print_name(m, class);
 		seq_puts(m, "\n");
@@ -350,7 +323,9 @@ static int lockdep_stats_show(struct seq_file *m, void *v)
 		if (class->usage_mask & LOCKF_ENABLED_HARDIRQS_READ)
 			nr_hardirq_read_unsafe++;
 
-		sum_forward_deps += count_forward_deps(class);
+#ifdef CONFIG_PROVE_LOCKING
+		sum_forward_deps += lockdep_count_forward_deps(class);
+#endif
 	}
 #ifdef CONFIG_DEBUG_LOCKDEP
 	DEBUG_LOCKS_WARN_ON(debug_atomic_read(&nr_unused_locks) != nr_unused);
@@ -497,8 +472,9 @@ static void snprint_time(char *buf, size_t bufsiz, s64 nr)
 {
 	unsigned long rem;
 
+	nr += 5; /* for display rounding */
 	rem = do_div(nr, 1000); /* XXX: do_div_signed */
-	snprintf(buf, bufsiz, "%lld.%02d", (long long)nr, ((int)rem+5)/10);
+	snprintf(buf, bufsiz, "%lld.%02d", (long long)nr, (int)rem/10);
 }
 
 static void seq_time(struct seq_file *m, s64 time)
diff --git a/kernel/marker.c b/kernel/marker.c
index 1abfb923b761..7d1faecd7a51 100644
--- a/kernel/marker.c
+++ b/kernel/marker.c
@@ -126,6 +126,11 @@ void marker_probe_cb(const struct marker *mdata, void *call_private, ...)
 		struct marker_probe_closure *multi;
 		int i;
 		/*
+		 * Read mdata->ptype before mdata->multi.
+		 */
+		smp_rmb();
+		multi = mdata->multi;
+		/*
 		 * multi points to an array, therefore accessing the array
 		 * depends on reading multi. However, even in this case,
 		 * we must insure that the pointer is read _before_ the array
@@ -133,7 +138,6 @@ void marker_probe_cb(const struct marker *mdata, void *call_private, ...)
 		 * in the fast path, so put the explicit barrier here.
 		 */
 		smp_read_barrier_depends();
-		multi = mdata->multi;
 		for (i = 0; multi[i].func; i++) {
 			va_start(args, call_private);
 			multi[i].func(multi[i].probe_private, call_private,
@@ -175,6 +179,11 @@ void marker_probe_cb_noarg(const struct marker *mdata, void *call_private, ...)
 		struct marker_probe_closure *multi;
 		int i;
 		/*
+		 * Read mdata->ptype before mdata->multi.
+		 */
+		smp_rmb();
+		multi = mdata->multi;
+		/*
 		 * multi points to an array, therefore accessing the array
 		 * depends on reading multi. However, even in this case,
 		 * we must insure that the pointer is read _before_ the array
@@ -182,7 +191,6 @@ void marker_probe_cb_noarg(const struct marker *mdata, void *call_private, ...)
 		 * in the fast path, so put the explicit barrier here.
 		 */
 		smp_read_barrier_depends();
-		multi = mdata->multi;
 		for (i = 0; multi[i].func; i++)
 			multi[i].func(multi[i].probe_private, call_private,
 				mdata->format, &args);
@@ -441,7 +449,7 @@ static int remove_marker(const char *name)
 	hlist_del(&e->hlist);
 	/* Make sure the call_rcu has been executed */
 	if (e->rcu_pending)
-		rcu_barrier();
+		rcu_barrier_sched();
 	kfree(e);
 	return 0;
 }
@@ -476,7 +484,7 @@ static int marker_set_format(struct marker_entry **entry, const char *format)
 	hlist_del(&(*entry)->hlist);
 	/* Make sure the call_rcu has been executed */
 	if ((*entry)->rcu_pending)
-		rcu_barrier();
+		rcu_barrier_sched();
 	kfree(*entry);
 	*entry = e;
 	trace_mark(core_marker_format, "name %s format %s",
@@ -655,7 +663,7 @@ int marker_probe_register(const char *name, const char *format,
 	 * make sure it's executed now.
 	 */
 	if (entry->rcu_pending)
-		rcu_barrier();
+		rcu_barrier_sched();
 	old = marker_entry_add_probe(entry, probe, probe_private);
 	if (IS_ERR(old)) {
 		ret = PTR_ERR(old);
@@ -670,10 +678,7 @@ int marker_probe_register(const char *name, const char *format,
 	entry->rcu_pending = 1;
 	/* write rcu_pending before calling the RCU callback */
 	smp_wmb();
-#ifdef CONFIG_PREEMPT_RCU
-	synchronize_sched();	/* Until we have the call_rcu_sched() */
-#endif
-	call_rcu(&entry->rcu, free_old_closure);
+	call_rcu_sched(&entry->rcu, free_old_closure);
 end:
 	mutex_unlock(&markers_mutex);
 	return ret;
@@ -704,7 +709,7 @@ int marker_probe_unregister(const char *name,
 	if (!entry)
 		goto end;
 	if (entry->rcu_pending)
-		rcu_barrier();
+		rcu_barrier_sched();
 	old = marker_entry_remove_probe(entry, probe, probe_private);
 	mutex_unlock(&markers_mutex);
 	marker_update_probes();		/* may update entry */
@@ -716,10 +721,7 @@ int marker_probe_unregister(const char *name,
 	entry->rcu_pending = 1;
 	/* write rcu_pending before calling the RCU callback */
 	smp_wmb();
-#ifdef CONFIG_PREEMPT_RCU
-	synchronize_sched();	/* Until we have the call_rcu_sched() */
-#endif
-	call_rcu(&entry->rcu, free_old_closure);
+	call_rcu_sched(&entry->rcu, free_old_closure);
 	remove_marker(name);	/* Ignore busy error message */
 	ret = 0;
 end:
@@ -786,7 +788,7 @@ int marker_probe_unregister_private_data(marker_probe_func *probe,
 		goto end;
 	}
 	if (entry->rcu_pending)
-		rcu_barrier();
+		rcu_barrier_sched();
 	old = marker_entry_remove_probe(entry, NULL, probe_private);
 	mutex_unlock(&markers_mutex);
 	marker_update_probes();		/* may update entry */
@@ -797,10 +799,7 @@ int marker_probe_unregister_private_data(marker_probe_func *probe,
 	entry->rcu_pending = 1;
 	/* write rcu_pending before calling the RCU callback */
 	smp_wmb();
-#ifdef CONFIG_PREEMPT_RCU
-	synchronize_sched();	/* Until we have the call_rcu_sched() */
-#endif
-	call_rcu(&entry->rcu, free_old_closure);
+	call_rcu_sched(&entry->rcu, free_old_closure);
 	remove_marker(entry->name);	/* Ignore busy error message */
 end:
 	mutex_unlock(&markers_mutex);
diff --git a/kernel/module.c b/kernel/module.c
index d8b5605132a0..9db11911e04b 100644
--- a/kernel/module.c
+++ b/kernel/module.c
@@ -325,18 +325,6 @@ static unsigned long find_symbol(const char *name,
 	return -ENOENT;
 }
 
-/* lookup symbol in given range of kernel_symbols */
-static const struct kernel_symbol *lookup_symbol(const char *name,
-	const struct kernel_symbol *start,
-	const struct kernel_symbol *stop)
-{
-	const struct kernel_symbol *ks = start;
-	for (; ks < stop; ks++)
-		if (strcmp(ks->name, name) == 0)
-			return ks;
-	return NULL;
-}
-
 /* Search for module by name: must hold module_mutex. */
 static struct module *find_module(const char *name)
 {
@@ -690,7 +678,7 @@ static int try_stop_module(struct module *mod, int flags, int *forced)
 	if (flags & O_NONBLOCK) {
 		struct stopref sref = { mod, flags, forced };
 
-		return stop_machine_run(__try_stop_module, &sref, NR_CPUS);
+		return stop_machine(__try_stop_module, &sref, NULL);
 	} else {
 		/* We don't need to stop the machine for this. */
 		mod->state = MODULE_STATE_GOING;
@@ -1428,7 +1416,7 @@ static int __unlink_module(void *_mod)
 static void free_module(struct module *mod)
 {
 	/* Delete from various lists */
-	stop_machine_run(__unlink_module, mod, NR_CPUS);
+	stop_machine(__unlink_module, mod, NULL);
 	remove_notes_attrs(mod);
 	remove_sect_attrs(mod);
 	mod_kobject_remove(mod);
@@ -1703,6 +1691,19 @@ static void setup_modinfo(struct module *mod, Elf_Shdr *sechdrs,
 }
 
 #ifdef CONFIG_KALLSYMS
+
+/* lookup symbol in given range of kernel_symbols */
+static const struct kernel_symbol *lookup_symbol(const char *name,
+	const struct kernel_symbol *start,
+	const struct kernel_symbol *stop)
+{
+	const struct kernel_symbol *ks = start;
+	for (; ks < stop; ks++)
+		if (strcmp(ks->name, name) == 0)
+			return ks;
+	return NULL;
+}
+
 static int is_exported(const char *name, const struct module *mod)
 {
 	if (!mod && lookup_symbol(name, __start___ksymtab, __stop___ksymtab))
@@ -1798,7 +1799,7 @@ static void *module_alloc_update_bounds(unsigned long size)
 
 /* Allocate and load the module: note that size of section 0 is always
    zero, and we rely on this for optional sections. */
-static struct module *load_module(void __user *umod,
+static noinline struct module *load_module(void __user *umod,
 				  unsigned long len,
 				  const char __user *uargs)
 {
@@ -2196,7 +2197,7 @@ static struct module *load_module(void __user *umod,
 	/* Now sew it into the lists so we can get lockdep and oops
          * info during argument parsing.  Noone should access us, since
          * strong_try_module_get() will fail. */
-	stop_machine_run(__link_module, mod, NR_CPUS);
+	stop_machine(__link_module, mod, NULL);
 
 	/* Size of section 0 is 0, so this works well if no params */
 	err = parse_args(mod->name, mod->args,
@@ -2230,7 +2231,7 @@ static struct module *load_module(void __user *umod,
 	return mod;
 
  unlink:
-	stop_machine_run(__unlink_module, mod, NR_CPUS);
+	stop_machine(__unlink_module, mod, NULL);
 	module_arch_cleanup(mod);
  cleanup:
 	kobject_del(&mod->mkobj.kobj);
@@ -2287,7 +2288,7 @@ sys_init_module(void __user *umod,
 
 	/* Start the module */
 	if (mod->init != NULL)
-		ret = mod->init();
+		ret = do_one_initcall(mod->init);
 	if (ret < 0) {
 		/* Init routine failed: abort.  Try to protect us from
                    buggy refcounters. */
diff --git a/kernel/mutex.c b/kernel/mutex.c
index bcdc9ac8ef60..12c779dc65d4 100644
--- a/kernel/mutex.c
+++ b/kernel/mutex.c
@@ -34,6 +34,7 @@
 /***
  * mutex_init - initialize the mutex
  * @lock: the mutex to be initialized
+ * @key: the lock_class_key for the class; used by mutex lock debugging
  *
  * Initialize the mutex to unlocked state.
  *
diff --git a/kernel/ns_cgroup.c b/kernel/ns_cgroup.c
index 48d7ed6fc3a4..43c2111cd54d 100644
--- a/kernel/ns_cgroup.c
+++ b/kernel/ns_cgroup.c
@@ -7,6 +7,7 @@
 #include <linux/module.h>
 #include <linux/cgroup.h>
 #include <linux/fs.h>
+#include <linux/proc_fs.h>
 #include <linux/slab.h>
 #include <linux/nsproxy.h>
 
@@ -24,9 +25,12 @@ static inline struct ns_cgroup *cgroup_to_ns(
 			    struct ns_cgroup, css);
 }
 
-int ns_cgroup_clone(struct task_struct *task)
+int ns_cgroup_clone(struct task_struct *task, struct pid *pid)
 {
-	return cgroup_clone(task, &ns_subsys);
+	char name[PROC_NUMBUF];
+
+	snprintf(name, PROC_NUMBUF, "%d", pid_vnr(pid));
+	return cgroup_clone(task, &ns_subsys, name);
 }
 
 /*
diff --git a/kernel/nsproxy.c b/kernel/nsproxy.c
index adc785146a1c..1d3ef29a2583 100644
--- a/kernel/nsproxy.c
+++ b/kernel/nsproxy.c
@@ -14,7 +14,6 @@
  */
 
 #include <linux/module.h>
-#include <linux/version.h>
 #include <linux/nsproxy.h>
 #include <linux/init_task.h>
 #include <linux/mnt_namespace.h>
@@ -157,12 +156,6 @@ int copy_namespaces(unsigned long flags, struct task_struct *tsk)
 		goto out;
 	}
 
-	err = ns_cgroup_clone(tsk);
-	if (err) {
-		put_nsproxy(new_ns);
-		goto out;
-	}
-
 	tsk->nsproxy = new_ns;
 
 out:
@@ -209,7 +202,7 @@ int unshare_nsproxy_namespaces(unsigned long unshare_flags,
 		goto out;
 	}
 
-	err = ns_cgroup_clone(current);
+	err = ns_cgroup_clone(current, task_pid(current));
 	if (err)
 		put_nsproxy(*new_nsp);
 
diff --git a/kernel/panic.c b/kernel/panic.c
index 425567f45b9f..12c5a0a6c89b 100644
--- a/kernel/panic.c
+++ b/kernel/panic.c
@@ -318,6 +318,28 @@ void warn_on_slowpath(const char *file, int line)
 	add_taint(TAINT_WARN);
 }
 EXPORT_SYMBOL(warn_on_slowpath);
+
+
+void warn_slowpath(const char *file, int line, const char *fmt, ...)
+{
+	va_list args;
+	char function[KSYM_SYMBOL_LEN];
+	unsigned long caller = (unsigned long)__builtin_return_address(0);
+	sprint_symbol(function, caller);
+
+	printk(KERN_WARNING "------------[ cut here ]------------\n");
+	printk(KERN_WARNING "WARNING: at %s:%d %s()\n", file,
+		line, function);
+	va_start(args, fmt);
+	vprintk(fmt, args);
+	va_end(args);
+
+	print_modules();
+	dump_stack();
+	print_oops_end_marker();
+	add_taint(TAINT_WARN);
+}
+EXPORT_SYMBOL(warn_slowpath);
 #endif
 
 #ifdef CONFIG_CC_STACKPROTECTOR
diff --git a/kernel/pid.c b/kernel/pid.c
index 30bd5d4b2ac7..064e76afa507 100644
--- a/kernel/pid.c
+++ b/kernel/pid.c
@@ -309,12 +309,6 @@ struct pid *find_vpid(int nr)
 }
 EXPORT_SYMBOL_GPL(find_vpid);
 
-struct pid *find_pid(int nr)
-{
-	return find_pid_ns(nr, &init_pid_ns);
-}
-EXPORT_SYMBOL_GPL(find_pid);
-
 /*
  * attach_pid() must be called with the tasklist_lock write-held.
  */
@@ -435,6 +429,7 @@ struct pid *find_get_pid(pid_t nr)
 
 	return pid;
 }
+EXPORT_SYMBOL_GPL(find_get_pid);
 
 pid_t pid_nr_ns(struct pid *pid, struct pid_namespace *ns)
 {
@@ -482,7 +477,7 @@ EXPORT_SYMBOL(task_session_nr_ns);
 /*
  * Used by proc to find the first pid that is greater then or equal to nr.
  *
- * If there is a pid at nr this function is exactly the same as find_pid.
+ * If there is a pid at nr this function is exactly the same as find_pid_ns.
  */
 struct pid *find_ge_pid(int nr, struct pid_namespace *ns)
 {
@@ -497,7 +492,6 @@ struct pid *find_ge_pid(int nr, struct pid_namespace *ns)
 
 	return pid;
 }
-EXPORT_SYMBOL_GPL(find_get_pid);
 
 /*
  * The pid hash table is scaled according to the amount of memory in the
diff --git a/kernel/pid_namespace.c b/kernel/pid_namespace.c
index 98702b4b8851..fab8ea86fac3 100644
--- a/kernel/pid_namespace.c
+++ b/kernel/pid_namespace.c
@@ -12,6 +12,7 @@
 #include <linux/pid_namespace.h>
 #include <linux/syscalls.h>
 #include <linux/err.h>
+#include <linux/acct.h>
 
 #define BITS_PER_PAGE		(PAGE_SIZE*8)
 
@@ -71,7 +72,7 @@ static struct pid_namespace *create_pid_namespace(unsigned int level)
 	struct pid_namespace *ns;
 	int i;
 
-	ns = kmem_cache_alloc(pid_ns_cachep, GFP_KERNEL);
+	ns = kmem_cache_zalloc(pid_ns_cachep, GFP_KERNEL);
 	if (ns == NULL)
 		goto out;
 
@@ -84,17 +85,13 @@ static struct pid_namespace *create_pid_namespace(unsigned int level)
 		goto out_free_map;
 
 	kref_init(&ns->kref);
-	ns->last_pid = 0;
-	ns->child_reaper = NULL;
 	ns->level = level;
 
 	set_bit(0, ns->pidmap[0].page);
 	atomic_set(&ns->pidmap[0].nr_free, BITS_PER_PAGE - 1);
 
-	for (i = 1; i < PIDMAP_ENTRIES; i++) {
-		ns->pidmap[i].page = NULL;
+	for (i = 1; i < PIDMAP_ENTRIES; i++)
 		atomic_set(&ns->pidmap[i].nr_free, BITS_PER_PAGE);
-	}
 
 	return ns;
 
@@ -182,9 +179,7 @@ void zap_pid_ns_processes(struct pid_namespace *pid_ns)
 		rc = sys_wait4(-1, NULL, __WALL, NULL);
 	} while (rc != -ECHILD);
 
-
-	/* Child reaper for the pid namespace is going away */
-	pid_ns->child_reaper = NULL;
+	acct_exit_ns(pid_ns);
 	return;
 }
 
diff --git a/kernel/pm_qos_params.c b/kernel/pm_qos_params.c
index 8cb757026386..dfdec524d1b7 100644
--- a/kernel/pm_qos_params.c
+++ b/kernel/pm_qos_params.c
@@ -24,7 +24,7 @@
  * requirement that the application has is cleaned up when closes the file
  * pointer or exits the pm_qos_object will get an opportunity to clean up.
  *
- * mark gross mgross@linux.intel.com
+ * Mark Gross <mgross@linux.intel.com>
  */
 
 #include <linux/pm_qos_params.h>
@@ -43,7 +43,7 @@
 #include <linux/uaccess.h>
 
 /*
- * locking rule: all changes to target_value or requirements or notifiers lists
+ * locking rule: all changes to requirements or notifiers lists
  * or pm_qos_object list and pm_qos_objects need to happen with pm_qos_lock
  * held, taken with _irqsave.  One lock to rule them all
  */
@@ -66,7 +66,7 @@ struct pm_qos_object {
 	struct miscdevice pm_qos_power_miscdev;
 	char *name;
 	s32 default_value;
-	s32 target_value;
+	atomic_t target_value;
 	s32 (*comparitor)(s32, s32);
 };
 
@@ -77,7 +77,7 @@ static struct pm_qos_object cpu_dma_pm_qos = {
 	.notifiers = &cpu_dma_lat_notifier,
 	.name = "cpu_dma_latency",
 	.default_value = 2000 * USEC_PER_SEC,
-	.target_value = 2000 * USEC_PER_SEC,
+	.target_value = ATOMIC_INIT(2000 * USEC_PER_SEC),
 	.comparitor = min_compare
 };
 
@@ -87,7 +87,7 @@ static struct pm_qos_object network_lat_pm_qos = {
 	.notifiers = &network_lat_notifier,
 	.name = "network_latency",
 	.default_value = 2000 * USEC_PER_SEC,
-	.target_value = 2000 * USEC_PER_SEC,
+	.target_value = ATOMIC_INIT(2000 * USEC_PER_SEC),
 	.comparitor = min_compare
 };
 
@@ -99,7 +99,7 @@ static struct pm_qos_object network_throughput_pm_qos = {
 	.notifiers = &network_throughput_notifier,
 	.name = "network_throughput",
 	.default_value = 0,
-	.target_value = 0,
+	.target_value = ATOMIC_INIT(0),
 	.comparitor = max_compare
 };
 
@@ -150,11 +150,11 @@ static void update_target(int target)
 		extreme_value = pm_qos_array[target]->comparitor(
 				extreme_value, node->value);
 	}
-	if (pm_qos_array[target]->target_value != extreme_value) {
+	if (atomic_read(&pm_qos_array[target]->target_value) != extreme_value) {
 		call_notifier = 1;
-		pm_qos_array[target]->target_value = extreme_value;
+		atomic_set(&pm_qos_array[target]->target_value, extreme_value);
 		pr_debug(KERN_ERR "new target for qos %d is %d\n", target,
-			pm_qos_array[target]->target_value);
+			atomic_read(&pm_qos_array[target]->target_value));
 	}
 	spin_unlock_irqrestore(&pm_qos_lock, flags);
 
@@ -193,14 +193,7 @@ static int find_pm_qos_object_by_minor(int minor)
  */
 int pm_qos_requirement(int pm_qos_class)
 {
-	int ret_val;
-	unsigned long flags;
-
-	spin_lock_irqsave(&pm_qos_lock, flags);
-	ret_val = pm_qos_array[pm_qos_class]->target_value;
-	spin_unlock_irqrestore(&pm_qos_lock, flags);
-
-	return ret_val;
+	return atomic_read(&pm_qos_array[pm_qos_class]->target_value);
 }
 EXPORT_SYMBOL_GPL(pm_qos_requirement);
 
@@ -211,8 +204,8 @@ EXPORT_SYMBOL_GPL(pm_qos_requirement);
  * @value: defines the qos request
  *
  * This function inserts a new entry in the pm_qos_class list of requested qos
- * performance charactoistics.  It recomputes the agregate QoS expectations for
- * the pm_qos_class of parrameters.
+ * performance characteristics.  It recomputes the aggregate QoS expectations
+ * for the pm_qos_class of parameters.
  */
 int pm_qos_add_requirement(int pm_qos_class, char *name, s32 value)
 {
@@ -250,10 +243,10 @@ EXPORT_SYMBOL_GPL(pm_qos_add_requirement);
  * @name: identifies the request
  * @value: defines the qos request
  *
- * Updates an existing qos requierement for the pm_qos_class of parameters along
+ * Updates an existing qos requirement for the pm_qos_class of parameters along
  * with updating the target pm_qos_class value.
  *
- * If the named request isn't in the lest then no change is made.
+ * If the named request isn't in the list then no change is made.
  */
 int pm_qos_update_requirement(int pm_qos_class, char *name, s32 new_value)
 {
@@ -287,7 +280,7 @@ EXPORT_SYMBOL_GPL(pm_qos_update_requirement);
  * @pm_qos_class: identifies which list of qos request to us
  * @name: identifies the request
  *
- * Will remove named qos request from pm_qos_class list of parrameters and
+ * Will remove named qos request from pm_qos_class list of parameters and
  * recompute the current target value for the pm_qos_class.
  */
 void pm_qos_remove_requirement(int pm_qos_class, char *name)
@@ -319,7 +312,7 @@ EXPORT_SYMBOL_GPL(pm_qos_remove_requirement);
  * @notifier: notifier block managed by caller.
  *
  * will register the notifier into a notification chain that gets called
- * uppon changes to the pm_qos_class target value.
+ * upon changes to the pm_qos_class target value.
  */
  int pm_qos_add_notifier(int pm_qos_class, struct notifier_block *notifier)
 {
@@ -338,7 +331,7 @@ EXPORT_SYMBOL_GPL(pm_qos_add_notifier);
  * @notifier: notifier block to be removed.
  *
  * will remove the notifier from the notification chain that gets called
- * uppon changes to the pm_qos_class target value.
+ * upon changes to the pm_qos_class target value.
  */
 int pm_qos_remove_notifier(int pm_qos_class, struct notifier_block *notifier)
 {
diff --git a/kernel/posix-timers.c b/kernel/posix-timers.c
index dbd8398ddb0b..e36d5798cbff 100644
--- a/kernel/posix-timers.c
+++ b/kernel/posix-timers.c
@@ -289,21 +289,29 @@ void do_schedule_next_timer(struct siginfo *info)
 		else
 			schedule_next_timer(timr);
 
-		info->si_overrun = timr->it_overrun_last;
+		info->si_overrun += timr->it_overrun_last;
 	}
 
 	if (timr)
 		unlock_timer(timr, flags);
 }
 
-int posix_timer_event(struct k_itimer *timr,int si_private)
+int posix_timer_event(struct k_itimer *timr, int si_private)
 {
-	memset(&timr->sigq->info, 0, sizeof(siginfo_t));
+	/*
+	 * FIXME: if ->sigq is queued we can race with
+	 * dequeue_signal()->do_schedule_next_timer().
+	 *
+	 * If dequeue_signal() sees the "right" value of
+	 * si_sys_private it calls do_schedule_next_timer().
+	 * We re-queue ->sigq and drop ->it_lock().
+	 * do_schedule_next_timer() locks the timer
+	 * and re-schedules it while ->sigq is pending.
+	 * Not really bad, but not that we want.
+	 */
 	timr->sigq->info.si_sys_private = si_private;
-	/* Send signal to the process that owns this timer.*/
 
 	timr->sigq->info.si_signo = timr->it_sigev_signo;
-	timr->sigq->info.si_errno = 0;
 	timr->sigq->info.si_code = SI_TIMER;
 	timr->sigq->info.si_tid = timr->it_id;
 	timr->sigq->info.si_value = timr->it_sigev_value;
@@ -435,6 +443,7 @@ static struct k_itimer * alloc_posix_timer(void)
 		kmem_cache_free(posix_timers_cache, tmr);
 		tmr = NULL;
 	}
+	memset(&tmr->sigq->info, 0, sizeof(siginfo_t));
 	return tmr;
 }
 
@@ -449,9 +458,6 @@ static void release_posix_timer(struct k_itimer *tmr, int it_id_set)
 		spin_unlock_irqrestore(&idr_lock, flags);
 	}
 	sigqueue_free(tmr->sigq);
-	if (unlikely(tmr->it_process) &&
-	    tmr->it_sigev_notify == (SIGEV_SIGNAL|SIGEV_THREAD_ID))
-		put_task_struct(tmr->it_process);
 	kmem_cache_free(posix_timers_cache, tmr);
 }
 
@@ -856,11 +862,10 @@ retry_delete:
 	 * This keeps any tasks waiting on the spin lock from thinking
 	 * they got something (see the lock code above).
 	 */
-	if (timer->it_process) {
-		if (timer->it_sigev_notify == (SIGEV_SIGNAL|SIGEV_THREAD_ID))
-			put_task_struct(timer->it_process);
-		timer->it_process = NULL;
-	}
+	if (timer->it_sigev_notify == (SIGEV_SIGNAL|SIGEV_THREAD_ID))
+		put_task_struct(timer->it_process);
+	timer->it_process = NULL;
+
 	unlock_timer(timer, flags);
 	release_posix_timer(timer, IT_ID_SET);
 	return 0;
@@ -885,11 +890,10 @@ retry_delete:
 	 * This keeps any tasks waiting on the spin lock from thinking
 	 * they got something (see the lock code above).
 	 */
-	if (timer->it_process) {
-		if (timer->it_sigev_notify == (SIGEV_SIGNAL|SIGEV_THREAD_ID))
-			put_task_struct(timer->it_process);
-		timer->it_process = NULL;
-	}
+	if (timer->it_sigev_notify == (SIGEV_SIGNAL|SIGEV_THREAD_ID))
+		put_task_struct(timer->it_process);
+	timer->it_process = NULL;
+
 	unlock_timer(timer, flags);
 	release_posix_timer(timer, IT_ID_SET);
 }
diff --git a/kernel/power/disk.c b/kernel/power/disk.c
index f011e0870b52..bbd85c60f741 100644
--- a/kernel/power/disk.c
+++ b/kernel/power/disk.c
@@ -21,6 +21,7 @@
 #include <linux/console.h>
 #include <linux/cpu.h>
 #include <linux/freezer.h>
+#include <linux/ftrace.h>
 
 #include "power.h"
 
@@ -255,7 +256,7 @@ static int create_image(int platform_mode)
 
 int hibernation_snapshot(int platform_mode)
 {
-	int error;
+	int error, ftrace_save;
 
 	/* Free memory before shutting down devices. */
 	error = swsusp_shrink_memory();
@@ -267,6 +268,7 @@ int hibernation_snapshot(int platform_mode)
 		goto Close;
 
 	suspend_console();
+	ftrace_save = __ftrace_enabled_save();
 	error = device_suspend(PMSG_FREEZE);
 	if (error)
 		goto Recover_platform;
@@ -296,6 +298,7 @@ int hibernation_snapshot(int platform_mode)
  Resume_devices:
 	device_resume(in_suspend ?
 		(error ? PMSG_RECOVER : PMSG_THAW) : PMSG_RESTORE);
+	__ftrace_enabled_restore(ftrace_save);
 	resume_console();
  Close:
 	platform_end(platform_mode);
@@ -366,10 +369,11 @@ static int resume_target_kernel(void)
 
 int hibernation_restore(int platform_mode)
 {
-	int error;
+	int error, ftrace_save;
 
 	pm_prepare_console();
 	suspend_console();
+	ftrace_save = __ftrace_enabled_save();
 	error = device_suspend(PMSG_QUIESCE);
 	if (error)
 		goto Finish;
@@ -384,6 +388,7 @@ int hibernation_restore(int platform_mode)
 	platform_restore_cleanup(platform_mode);
 	device_resume(PMSG_RECOVER);
  Finish:
+	__ftrace_enabled_restore(ftrace_save);
 	resume_console();
 	pm_restore_console();
 	return error;
@@ -396,7 +401,7 @@ int hibernation_restore(int platform_mode)
 
 int hibernation_platform_enter(void)
 {
-	int error;
+	int error, ftrace_save;
 
 	if (!hibernation_ops)
 		return -ENOSYS;
@@ -411,6 +416,7 @@ int hibernation_platform_enter(void)
 		goto Close;
 
 	suspend_console();
+	ftrace_save = __ftrace_enabled_save();
 	error = device_suspend(PMSG_HIBERNATE);
 	if (error) {
 		if (hibernation_ops->recover)
@@ -445,6 +451,7 @@ int hibernation_platform_enter(void)
 	hibernation_ops->finish();
  Resume_devices:
 	device_resume(PMSG_RESTORE);
+	__ftrace_enabled_restore(ftrace_save);
 	resume_console();
  Close:
 	hibernation_ops->end();
diff --git a/kernel/power/main.c b/kernel/power/main.c
index 95bff23ecdaa..540b16b68565 100644
--- a/kernel/power/main.c
+++ b/kernel/power/main.c
@@ -21,6 +21,7 @@
 #include <linux/freezer.h>
 #include <linux/vmstat.h>
 #include <linux/syscalls.h>
+#include <linux/ftrace.h>
 
 #include "power.h"
 
@@ -310,7 +311,7 @@ static int suspend_enter(suspend_state_t state)
  */
 int suspend_devices_and_enter(suspend_state_t state)
 {
-	int error;
+	int error, ftrace_save;
 
 	if (!suspend_ops)
 		return -ENOSYS;
@@ -321,6 +322,7 @@ int suspend_devices_and_enter(suspend_state_t state)
 			goto Close;
 	}
 	suspend_console();
+	ftrace_save = __ftrace_enabled_save();
 	suspend_test_start();
 	error = device_suspend(PMSG_SUSPEND);
 	if (error) {
@@ -352,6 +354,7 @@ int suspend_devices_and_enter(suspend_state_t state)
 	suspend_test_start();
 	device_resume(PMSG_RESUME);
 	suspend_test_finish("resume devices");
+	__ftrace_enabled_restore(ftrace_save);
 	resume_console();
  Close:
 	if (suspend_ops->end)
@@ -635,6 +638,13 @@ static void __init test_wakealarm(struct rtc_device *rtc, suspend_state_t state)
 	}
 	if (status < 0)
 		printk(err_suspend, status);
+
+	/* Some platforms can't detect that the alarm triggered the
+	 * wakeup, or (accordingly) disable it after it afterwards.
+	 * It's supposed to give oneshot behavior; cope.
+	 */
+	alm.enabled = false;
+	rtc_set_alarm(rtc, &alm);
 }
 
 static int __init has_wakealarm(struct device *dev, void *name_ptr)
diff --git a/kernel/power/power.h b/kernel/power/power.h
index 700f44ec8406..acc0c101dbd5 100644
--- a/kernel/power/power.h
+++ b/kernel/power/power.h
@@ -53,8 +53,6 @@ extern int hibernation_platform_enter(void);
 
 extern int pfn_is_nosave(unsigned long);
 
-extern struct mutex pm_mutex;
-
 #define power_attr(_name) \
 static struct kobj_attribute _name##_attr = {	\
 	.attr	= {				\
diff --git a/kernel/power/swap.c b/kernel/power/swap.c
index a0abf9a463f9..80ccac849e46 100644
--- a/kernel/power/swap.c
+++ b/kernel/power/swap.c
@@ -14,7 +14,6 @@
 #include <linux/module.h>
 #include <linux/file.h>
 #include <linux/utsname.h>
-#include <linux/version.h>
 #include <linux/delay.h>
 #include <linux/bitops.h>
 #include <linux/genhd.h>
diff --git a/kernel/printk.c b/kernel/printk.c
index 3f7a2a94583b..b51b1567bb55 100644
--- a/kernel/printk.c
+++ b/kernel/printk.c
@@ -1308,29 +1308,18 @@ void tty_write_message(struct tty_struct *tty, char *msg)
 }
 
 #if defined CONFIG_PRINTK
+
 /*
  * printk rate limiting, lifted from the networking subsystem.
  *
- * This enforces a rate limit: not more than one kernel message
- * every printk_ratelimit_jiffies to make a denial-of-service
- * attack impossible.
+ * This enforces a rate limit: not more than 10 kernel messages
+ * every 5s to make a denial-of-service attack impossible.
  */
-int __printk_ratelimit(int ratelimit_jiffies, int ratelimit_burst)
-{
-	return __ratelimit(ratelimit_jiffies, ratelimit_burst);
-}
-EXPORT_SYMBOL(__printk_ratelimit);
-
-/* minimum time in jiffies between messages */
-int printk_ratelimit_jiffies = 5 * HZ;
-
-/* number of messages we send before ratelimiting */
-int printk_ratelimit_burst = 10;
+DEFINE_RATELIMIT_STATE(printk_ratelimit_state, 5 * HZ, 10);
 
 int printk_ratelimit(void)
 {
-	return __printk_ratelimit(printk_ratelimit_jiffies,
-				printk_ratelimit_burst);
+	return __ratelimit(&printk_ratelimit_state);
 }
 EXPORT_SYMBOL(printk_ratelimit);
 
diff --git a/kernel/profile.c b/kernel/profile.c
index 58926411eb2a..cd26bed4cc26 100644
--- a/kernel/profile.c
+++ b/kernel/profile.c
@@ -112,8 +112,6 @@ void __init profile_init(void)
 
 /* Profile event notifications */
 
-#ifdef CONFIG_PROFILING
-
 static BLOCKING_NOTIFIER_HEAD(task_exit_notifier);
 static ATOMIC_NOTIFIER_HEAD(task_free_notifier);
 static BLOCKING_NOTIFIER_HEAD(munmap_notifier);
@@ -203,8 +201,6 @@ void unregister_timer_hook(int (*hook)(struct pt_regs *))
 }
 EXPORT_SYMBOL_GPL(unregister_timer_hook);
 
-#endif /* CONFIG_PROFILING */
-
 
 #ifdef CONFIG_SMP
 /*
diff --git a/kernel/ptrace.c b/kernel/ptrace.c
index 8392a9da6450..356699a96d56 100644
--- a/kernel/ptrace.c
+++ b/kernel/ptrace.c
@@ -107,7 +107,7 @@ int ptrace_check_attach(struct task_struct *child, int kill)
 	read_unlock(&tasklist_lock);
 
 	if (!ret && !kill)
-		wait_task_inactive(child);
+		ret = wait_task_inactive(child, TASK_TRACED) ? 0 : -ESRCH;
 
 	/* All systems go.. */
 	return ret;
@@ -140,7 +140,7 @@ int __ptrace_may_access(struct task_struct *task, unsigned int mode)
 	if (!dumpable && !capable(CAP_SYS_PTRACE))
 		return -EPERM;
 
-	return security_ptrace(current, task, mode);
+	return security_ptrace_may_access(task, mode);
 }
 
 bool ptrace_may_access(struct task_struct *task, unsigned int mode)
@@ -499,8 +499,7 @@ repeat:
 			goto repeat;
 		}
 
-		ret = security_ptrace(current->parent, current,
-				      PTRACE_MODE_ATTACH);
+		ret = security_ptrace_traceme(current->parent);
 
 		/*
 		 * Set the ptrace bit in the process ptrace flags.
diff --git a/kernel/rcuclassic.c b/kernel/rcuclassic.c
index 6f8696c502f4..aad93cdc9f68 100644
--- a/kernel/rcuclassic.c
+++ b/kernel/rcuclassic.c
@@ -91,8 +91,8 @@ static void force_quiescent_state(struct rcu_data *rdp,
 		 * rdp->cpu is the current cpu.
 		 *
 		 * cpu_online_map is updated by the _cpu_down()
-		 * using stop_machine_run(). Since we're in irqs disabled
-		 * section, stop_machine_run() is not exectuting, hence
+		 * using __stop_machine(). Since we're in irqs disabled
+		 * section, __stop_machine() is not exectuting, hence
 		 * the cpu_online_map is stable.
 		 *
 		 * However,  a cpu might have been offlined _just_ before
diff --git a/kernel/rcupdate.c b/kernel/rcupdate.c
index f14f372cf6f5..467d5940f624 100644
--- a/kernel/rcupdate.c
+++ b/kernel/rcupdate.c
@@ -77,6 +77,7 @@ void wakeme_after_rcu(struct rcu_head  *head)
  * sections are delimited by rcu_read_lock() and rcu_read_unlock(),
  * and may be nested.
  */
+void synchronize_rcu(void);	/* Makes kernel-doc tools happy */
 synchronize_rcu_xxx(synchronize_rcu, call_rcu)
 EXPORT_SYMBOL_GPL(synchronize_rcu);
 
diff --git a/kernel/relay.c b/kernel/relay.c
index 7de644cdec43..8d13a7855c08 100644
--- a/kernel/relay.c
+++ b/kernel/relay.c
@@ -407,6 +407,35 @@ void relay_reset(struct rchan *chan)
 }
 EXPORT_SYMBOL_GPL(relay_reset);
 
+static inline void relay_set_buf_dentry(struct rchan_buf *buf,
+					struct dentry *dentry)
+{
+	buf->dentry = dentry;
+	buf->dentry->d_inode->i_size = buf->early_bytes;
+}
+
+static struct dentry *relay_create_buf_file(struct rchan *chan,
+					    struct rchan_buf *buf,
+					    unsigned int cpu)
+{
+	struct dentry *dentry;
+	char *tmpname;
+
+	tmpname = kzalloc(NAME_MAX + 1, GFP_KERNEL);
+	if (!tmpname)
+		return NULL;
+	snprintf(tmpname, NAME_MAX, "%s%d", chan->base_filename, cpu);
+
+	/* Create file in fs */
+	dentry = chan->cb->create_buf_file(tmpname, chan->parent,
+					   S_IRUSR, buf,
+					   &chan->is_global);
+
+	kfree(tmpname);
+
+	return dentry;
+}
+
 /*
  *	relay_open_buf - create a new relay channel buffer
  *
@@ -416,45 +445,34 @@ static struct rchan_buf *relay_open_buf(struct rchan *chan, unsigned int cpu)
 {
  	struct rchan_buf *buf = NULL;
 	struct dentry *dentry;
- 	char *tmpname;
 
  	if (chan->is_global)
 		return chan->buf[0];
 
-	tmpname = kzalloc(NAME_MAX + 1, GFP_KERNEL);
- 	if (!tmpname)
- 		goto end;
- 	snprintf(tmpname, NAME_MAX, "%s%d", chan->base_filename, cpu);
-
 	buf = relay_create_buf(chan);
 	if (!buf)
- 		goto free_name;
+		return NULL;
+
+	if (chan->has_base_filename) {
+		dentry = relay_create_buf_file(chan, buf, cpu);
+		if (!dentry)
+			goto free_buf;
+		relay_set_buf_dentry(buf, dentry);
+	}
 
  	buf->cpu = cpu;
  	__relay_reset(buf, 1);
 
-	/* Create file in fs */
- 	dentry = chan->cb->create_buf_file(tmpname, chan->parent, S_IRUSR,
- 					   buf, &chan->is_global);
- 	if (!dentry)
- 		goto free_buf;
-
-	buf->dentry = dentry;
-
  	if(chan->is_global) {
  		chan->buf[0] = buf;
  		buf->cpu = 0;
   	}
 
- 	goto free_name;
+	return buf;
 
 free_buf:
  	relay_destroy_buf(buf);
- 	buf = NULL;
-free_name:
- 	kfree(tmpname);
-end:
-	return buf;
+	return NULL;
 }
 
 /**
@@ -537,8 +555,8 @@ static int __cpuinit relay_hotcpu_callback(struct notifier_block *nb,
 
 /**
  *	relay_open - create a new relay channel
- *	@base_filename: base name of files to create
- *	@parent: dentry of parent directory, %NULL for root directory
+ *	@base_filename: base name of files to create, %NULL for buffering only
+ *	@parent: dentry of parent directory, %NULL for root directory or buffer
  *	@subbuf_size: size of sub-buffers
  *	@n_subbufs: number of sub-buffers
  *	@cb: client callback functions
@@ -560,8 +578,6 @@ struct rchan *relay_open(const char *base_filename,
 {
 	unsigned int i;
 	struct rchan *chan;
-	if (!base_filename)
-		return NULL;
 
 	if (!(subbuf_size && n_subbufs))
 		return NULL;
@@ -576,7 +592,10 @@ struct rchan *relay_open(const char *base_filename,
 	chan->alloc_size = FIX_SIZE(subbuf_size * n_subbufs);
 	chan->parent = parent;
 	chan->private_data = private_data;
-	strlcpy(chan->base_filename, base_filename, NAME_MAX);
+	if (base_filename) {
+		chan->has_base_filename = 1;
+		strlcpy(chan->base_filename, base_filename, NAME_MAX);
+	}
 	setup_callbacks(chan, cb);
 	kref_init(&chan->kref);
 
@@ -604,6 +623,94 @@ free_bufs:
 }
 EXPORT_SYMBOL_GPL(relay_open);
 
+struct rchan_percpu_buf_dispatcher {
+	struct rchan_buf *buf;
+	struct dentry *dentry;
+};
+
+/* Called in atomic context. */
+static void __relay_set_buf_dentry(void *info)
+{
+	struct rchan_percpu_buf_dispatcher *p = info;
+
+	relay_set_buf_dentry(p->buf, p->dentry);
+}
+
+/**
+ *	relay_late_setup_files - triggers file creation
+ *	@chan: channel to operate on
+ *	@base_filename: base name of files to create
+ *	@parent: dentry of parent directory, %NULL for root directory
+ *
+ *	Returns 0 if successful, non-zero otherwise.
+ *
+ *	Use to setup files for a previously buffer-only channel.
+ *	Useful to do early tracing in kernel, before VFS is up, for example.
+ */
+int relay_late_setup_files(struct rchan *chan,
+			   const char *base_filename,
+			   struct dentry *parent)
+{
+	int err = 0;
+	unsigned int i, curr_cpu;
+	unsigned long flags;
+	struct dentry *dentry;
+	struct rchan_percpu_buf_dispatcher disp;
+
+	if (!chan || !base_filename)
+		return -EINVAL;
+
+	strlcpy(chan->base_filename, base_filename, NAME_MAX);
+
+	mutex_lock(&relay_channels_mutex);
+	/* Is chan already set up? */
+	if (unlikely(chan->has_base_filename))
+		return -EEXIST;
+	chan->has_base_filename = 1;
+	chan->parent = parent;
+	curr_cpu = get_cpu();
+	/*
+	 * The CPU hotplug notifier ran before us and created buffers with
+	 * no files associated. So it's safe to call relay_setup_buf_file()
+	 * on all currently online CPUs.
+	 */
+	for_each_online_cpu(i) {
+		if (unlikely(!chan->buf[i])) {
+			printk(KERN_ERR "relay_late_setup_files: CPU %u "
+					"has no buffer, it must have!\n", i);
+			BUG();
+			err = -EINVAL;
+			break;
+		}
+
+		dentry = relay_create_buf_file(chan, chan->buf[i], i);
+		if (unlikely(!dentry)) {
+			err = -EINVAL;
+			break;
+		}
+
+		if (curr_cpu == i) {
+			local_irq_save(flags);
+			relay_set_buf_dentry(chan->buf[i], dentry);
+			local_irq_restore(flags);
+		} else {
+			disp.buf = chan->buf[i];
+			disp.dentry = dentry;
+			smp_mb();
+			/* relay_channels_mutex must be held, so wait. */
+			err = smp_call_function_single(i,
+						       __relay_set_buf_dentry,
+						       &disp, 1);
+		}
+		if (unlikely(err))
+			break;
+	}
+	put_cpu();
+	mutex_unlock(&relay_channels_mutex);
+
+	return err;
+}
+
 /**
  *	relay_switch_subbuf - switch to a new sub-buffer
  *	@buf: channel buffer
@@ -627,8 +734,13 @@ size_t relay_switch_subbuf(struct rchan_buf *buf, size_t length)
 		old_subbuf = buf->subbufs_produced % buf->chan->n_subbufs;
 		buf->padding[old_subbuf] = buf->prev_padding;
 		buf->subbufs_produced++;
-		buf->dentry->d_inode->i_size += buf->chan->subbuf_size -
-			buf->padding[old_subbuf];
+		if (buf->dentry)
+			buf->dentry->d_inode->i_size +=
+				buf->chan->subbuf_size -
+				buf->padding[old_subbuf];
+		else
+			buf->early_bytes += buf->chan->subbuf_size -
+					    buf->padding[old_subbuf];
 		smp_mb();
 		if (waitqueue_active(&buf->read_wait))
 			/*
@@ -832,6 +944,10 @@ static void relay_file_read_consume(struct rchan_buf *buf,
 	size_t n_subbufs = buf->chan->n_subbufs;
 	size_t read_subbuf;
 
+	if (buf->subbufs_produced == buf->subbufs_consumed &&
+	    buf->offset == buf->bytes_consumed)
+		return;
+
 	if (buf->bytes_consumed + bytes_consumed > subbuf_size) {
 		relay_subbufs_consumed(buf->chan, buf->cpu, 1);
 		buf->bytes_consumed = 0;
@@ -863,6 +979,8 @@ static int relay_file_read_avail(struct rchan_buf *buf, size_t read_pos)
 
 	relay_file_read_consume(buf, read_pos, 0);
 
+	consumed = buf->subbufs_consumed;
+
 	if (unlikely(buf->offset > subbuf_size)) {
 		if (produced == consumed)
 			return 0;
@@ -881,8 +999,12 @@ static int relay_file_read_avail(struct rchan_buf *buf, size_t read_pos)
 	if (consumed > produced)
 		produced += n_subbufs * subbuf_size;
 
-	if (consumed == produced)
+	if (consumed == produced) {
+		if (buf->offset == subbuf_size &&
+		    buf->subbufs_produced > buf->subbufs_consumed)
+			return 1;
 		return 0;
+	}
 
 	return 1;
 }
@@ -1237,4 +1359,4 @@ static __init int relay_init(void)
 	return 0;
 }
 
-module_init(relay_init);
+early_initcall(relay_init);
diff --git a/kernel/res_counter.c b/kernel/res_counter.c
index d3c61b4ebef2..f275c8eca772 100644
--- a/kernel/res_counter.c
+++ b/kernel/res_counter.c
@@ -13,6 +13,7 @@
 #include <linux/slab.h>
 #include <linux/res_counter.h>
 #include <linux/uaccess.h>
+#include <linux/mm.h>
 
 void res_counter_init(struct res_counter *counter)
 {
@@ -102,44 +103,37 @@ u64 res_counter_read_u64(struct res_counter *counter, int member)
 	return *res_counter_member(counter, member);
 }
 
-ssize_t res_counter_write(struct res_counter *counter, int member,
-		const char __user *userbuf, size_t nbytes, loff_t *pos,
-		int (*write_strategy)(char *st_buf, unsigned long long *val))
+int res_counter_memparse_write_strategy(const char *buf,
+					unsigned long long *res)
 {
-	int ret;
-	char *buf, *end;
-	unsigned long flags;
-	unsigned long long tmp, *val;
-
-	buf = kmalloc(nbytes + 1, GFP_KERNEL);
-	ret = -ENOMEM;
-	if (buf == NULL)
-		goto out;
+	char *end;
+	/* FIXME - make memparse() take const char* args */
+	*res = memparse((char *)buf, &end);
+	if (*end != '\0')
+		return -EINVAL;
 
-	buf[nbytes] = '\0';
-	ret = -EFAULT;
-	if (copy_from_user(buf, userbuf, nbytes))
-		goto out_free;
+	*res = PAGE_ALIGN(*res);
+	return 0;
+}
 
-	ret = -EINVAL;
+int res_counter_write(struct res_counter *counter, int member,
+		      const char *buf, write_strategy_fn write_strategy)
+{
+	char *end;
+	unsigned long flags;
+	unsigned long long tmp, *val;
 
-	strstrip(buf);
 	if (write_strategy) {
-		if (write_strategy(buf, &tmp)) {
-			goto out_free;
-		}
+		if (write_strategy(buf, &tmp))
+			return -EINVAL;
 	} else {
 		tmp = simple_strtoull(buf, &end, 10);
 		if (*end != '\0')
-			goto out_free;
+			return -EINVAL;
 	}
 	spin_lock_irqsave(&counter->lock, flags);
 	val = res_counter_member(counter, member);
 	*val = tmp;
 	spin_unlock_irqrestore(&counter->lock, flags);
-	ret = nbytes;
-out_free:
-	kfree(buf);
-out:
-	return ret;
+	return 0;
 }
diff --git a/kernel/resource.c b/kernel/resource.c
index 74af2d7cb5a1..414d6fc9131e 100644
--- a/kernel/resource.c
+++ b/kernel/resource.c
@@ -362,35 +362,21 @@ int allocate_resource(struct resource *root, struct resource *new,
 
 EXPORT_SYMBOL(allocate_resource);
 
-/**
- * insert_resource - Inserts a resource in the resource tree
- * @parent: parent of the new resource
- * @new: new resource to insert
- *
- * Returns 0 on success, -EBUSY if the resource can't be inserted.
- *
- * This function is equivalent to request_resource when no conflict
- * happens. If a conflict happens, and the conflicting resources
- * entirely fit within the range of the new resource, then the new
- * resource is inserted and the conflicting resources become children of
- * the new resource.
+/*
+ * Insert a resource into the resource tree. If successful, return NULL,
+ * otherwise return the conflicting resource (compare to __request_resource())
  */
-int insert_resource(struct resource *parent, struct resource *new)
+static struct resource * __insert_resource(struct resource *parent, struct resource *new)
 {
-	int result;
 	struct resource *first, *next;
 
-	write_lock(&resource_lock);
-
 	for (;; parent = first) {
-	 	result = 0;
 		first = __request_resource(parent, new);
 		if (!first)
-			goto out;
+			return first;
 
-		result = -EBUSY;
 		if (first == parent)
-			goto out;
+			return first;
 
 		if ((first->start > new->start) || (first->end < new->end))
 			break;
@@ -401,15 +387,13 @@ int insert_resource(struct resource *parent, struct resource *new)
 	for (next = first; ; next = next->sibling) {
 		/* Partial overlap? Bad, and unfixable */
 		if (next->start < new->start || next->end > new->end)
-			goto out;
+			return next;
 		if (!next->sibling)
 			break;
 		if (next->sibling->start > new->end)
 			break;
 	}
 
-	result = 0;
-
 	new->parent = parent;
 	new->sibling = next->sibling;
 	new->child = first;
@@ -426,10 +410,64 @@ int insert_resource(struct resource *parent, struct resource *new)
 			next = next->sibling;
 		next->sibling = new;
 	}
+	return NULL;
+}
 
- out:
+/**
+ * insert_resource - Inserts a resource in the resource tree
+ * @parent: parent of the new resource
+ * @new: new resource to insert
+ *
+ * Returns 0 on success, -EBUSY if the resource can't be inserted.
+ *
+ * This function is equivalent to request_resource when no conflict
+ * happens. If a conflict happens, and the conflicting resources
+ * entirely fit within the range of the new resource, then the new
+ * resource is inserted and the conflicting resources become children of
+ * the new resource.
+ */
+int insert_resource(struct resource *parent, struct resource *new)
+{
+	struct resource *conflict;
+
+	write_lock(&resource_lock);
+	conflict = __insert_resource(parent, new);
+	write_unlock(&resource_lock);
+	return conflict ? -EBUSY : 0;
+}
+
+/**
+ * insert_resource_expand_to_fit - Insert a resource into the resource tree
+ * @root: root resource descriptor
+ * @new: new resource to insert
+ *
+ * Insert a resource into the resource tree, possibly expanding it in order
+ * to make it encompass any conflicting resources.
+ */
+void insert_resource_expand_to_fit(struct resource *root, struct resource *new)
+{
+	if (new->parent)
+		return;
+
+	write_lock(&resource_lock);
+	for (;;) {
+		struct resource *conflict;
+
+		conflict = __insert_resource(root, new);
+		if (!conflict)
+			break;
+		if (conflict == root)
+			break;
+
+		/* Ok, expand resource to cover the conflict, then try again .. */
+		if (conflict->start < new->start)
+			new->start = conflict->start;
+		if (conflict->end > new->end)
+			new->end = conflict->end;
+
+		printk("Expanded resource %s due to conflict with %s\n", new->name, conflict->name);
+	}
 	write_unlock(&resource_lock);
-	return result;
 }
 
 /**
@@ -478,6 +516,74 @@ int adjust_resource(struct resource *res, resource_size_t start, resource_size_t
 	return result;
 }
 
+static void __init __reserve_region_with_split(struct resource *root,
+		resource_size_t start, resource_size_t end,
+		const char *name)
+{
+	struct resource *parent = root;
+	struct resource *conflict;
+	struct resource *res = kzalloc(sizeof(*res), GFP_KERNEL);
+
+	if (!res)
+		return;
+
+	res->name = name;
+	res->start = start;
+	res->end = end;
+	res->flags = IORESOURCE_BUSY;
+
+	for (;;) {
+		conflict = __request_resource(parent, res);
+		if (!conflict)
+			break;
+		if (conflict != parent) {
+			parent = conflict;
+			if (!(conflict->flags & IORESOURCE_BUSY))
+				continue;
+		}
+
+		/* Uhhuh, that didn't work out.. */
+		kfree(res);
+		res = NULL;
+		break;
+	}
+
+	if (!res) {
+		printk(KERN_DEBUG "    __reserve_region_with_split: (%s) [%llx, %llx], res: (%s) [%llx, %llx]\n",
+			 conflict->name, conflict->start, conflict->end,
+			 name, start, end);
+
+		/* failed, split and try again */
+
+		/* conflict coverred whole area */
+		if (conflict->start <= start && conflict->end >= end)
+			return;
+
+		if (conflict->start > start)
+			__reserve_region_with_split(root, start, conflict->start-1, name);
+		if (!(conflict->flags & IORESOURCE_BUSY)) {
+			resource_size_t common_start, common_end;
+
+			common_start = max(conflict->start, start);
+			common_end = min(conflict->end, end);
+			if (common_start < common_end)
+				__reserve_region_with_split(root, common_start, common_end, name);
+		}
+		if (conflict->end < end)
+			__reserve_region_with_split(root, conflict->end+1, end, name);
+	}
+
+}
+
+void reserve_region_with_split(struct resource *root,
+		resource_size_t start, resource_size_t end,
+		const char *name)
+{
+	write_lock(&resource_lock);
+	__reserve_region_with_split(root, start, end, name);
+	write_unlock(&resource_lock);
+}
+
 EXPORT_SYMBOL(adjust_resource);
 
 /**
@@ -490,7 +596,7 @@ resource_size_t resource_alignment(struct resource *res)
 {
 	switch (res->flags & (IORESOURCE_SIZEALIGN | IORESOURCE_STARTALIGN)) {
 	case IORESOURCE_SIZEALIGN:
-		return res->end - res->start + 1;
+		return resource_size(res);
 	case IORESOURCE_STARTALIGN:
 		return res->start;
 	default:
diff --git a/kernel/sched.c b/kernel/sched.c
index 6acf749d3336..9a1ddb84e26d 100644
--- a/kernel/sched.c
+++ b/kernel/sched.c
@@ -600,7 +600,6 @@ struct rq {
 	/* BKL stats */
 	unsigned int bkl_count;
 #endif
-	struct lock_class_key rq_lock_key;
 };
 
 static DEFINE_PER_CPU_SHARED_ALIGNED(struct rq, runqueues);
@@ -809,9 +808,9 @@ const_debug unsigned int sysctl_sched_nr_migrate = 32;
 
 /*
  * ratelimit for updating the group shares.
- * default: 0.5ms
+ * default: 0.25ms
  */
-const_debug unsigned int sysctl_sched_shares_ratelimit = 500000;
+unsigned int sysctl_sched_shares_ratelimit = 250000;
 
 /*
  * period over which we measure -rt task cpu usage in us.
@@ -834,7 +833,7 @@ static inline u64 global_rt_period(void)
 
 static inline u64 global_rt_runtime(void)
 {
-	if (sysctl_sched_rt_period < 0)
+	if (sysctl_sched_rt_runtime < 0)
 		return RUNTIME_INF;
 
 	return (u64)sysctl_sched_rt_runtime * NSEC_PER_USEC;
@@ -1867,16 +1866,24 @@ migrate_task(struct task_struct *p, int dest_cpu, struct migration_req *req)
 /*
  * wait_task_inactive - wait for a thread to unschedule.
  *
+ * If @match_state is nonzero, it's the @p->state value just checked and
+ * not expected to change.  If it changes, i.e. @p might have woken up,
+ * then return zero.  When we succeed in waiting for @p to be off its CPU,
+ * we return a positive number (its total switch count).  If a second call
+ * a short while later returns the same number, the caller can be sure that
+ * @p has remained unscheduled the whole time.
+ *
  * The caller must ensure that the task *will* unschedule sometime soon,
  * else this function might spin for a *long* time. This function can't
  * be called with interrupts off, or it may introduce deadlock with
  * smp_call_function() if an IPI is sent by the same process we are
  * waiting to become inactive.
  */
-void wait_task_inactive(struct task_struct *p)
+unsigned long wait_task_inactive(struct task_struct *p, long match_state)
 {
 	unsigned long flags;
 	int running, on_rq;
+	unsigned long ncsw;
 	struct rq *rq;
 
 	for (;;) {
@@ -1899,8 +1906,11 @@ void wait_task_inactive(struct task_struct *p)
 		 * return false if the runqueue has changed and p
 		 * is actually now running somewhere else!
 		 */
-		while (task_running(rq, p))
+		while (task_running(rq, p)) {
+			if (match_state && unlikely(p->state != match_state))
+				return 0;
 			cpu_relax();
+		}
 
 		/*
 		 * Ok, time to look more closely! We need the rq
@@ -1910,9 +1920,21 @@ void wait_task_inactive(struct task_struct *p)
 		rq = task_rq_lock(p, &flags);
 		running = task_running(rq, p);
 		on_rq = p->se.on_rq;
+		ncsw = 0;
+		if (!match_state || p->state == match_state) {
+			ncsw = p->nivcsw + p->nvcsw;
+			if (unlikely(!ncsw))
+				ncsw = 1;
+		}
 		task_rq_unlock(rq, &flags);
 
 		/*
+		 * If it changed from the expected state, bail out now.
+		 */
+		if (unlikely(!ncsw))
+			break;
+
+		/*
 		 * Was it really running after all now that we
 		 * checked with the proper locks actually held?
 		 *
@@ -1944,6 +1966,8 @@ void wait_task_inactive(struct task_struct *p)
 		 */
 		break;
 	}
+
+	return ncsw;
 }
 
 /***
@@ -2734,10 +2758,10 @@ static void double_rq_lock(struct rq *rq1, struct rq *rq2)
 	} else {
 		if (rq1 < rq2) {
 			spin_lock(&rq1->lock);
-			spin_lock(&rq2->lock);
+			spin_lock_nested(&rq2->lock, SINGLE_DEPTH_NESTING);
 		} else {
 			spin_lock(&rq2->lock);
-			spin_lock(&rq1->lock);
+			spin_lock_nested(&rq1->lock, SINGLE_DEPTH_NESTING);
 		}
 	}
 	update_rq_clock(rq1);
@@ -2780,14 +2804,21 @@ static int double_lock_balance(struct rq *this_rq, struct rq *busiest)
 		if (busiest < this_rq) {
 			spin_unlock(&this_rq->lock);
 			spin_lock(&busiest->lock);
-			spin_lock(&this_rq->lock);
+			spin_lock_nested(&this_rq->lock, SINGLE_DEPTH_NESTING);
 			ret = 1;
 		} else
-			spin_lock(&busiest->lock);
+			spin_lock_nested(&busiest->lock, SINGLE_DEPTH_NESTING);
 	}
 	return ret;
 }
 
+static void double_unlock_balance(struct rq *this_rq, struct rq *busiest)
+	__releases(busiest->lock)
+{
+	spin_unlock(&busiest->lock);
+	lock_set_subclass(&this_rq->lock.dep_map, 0, _RET_IP_);
+}
+
 /*
  * If dest_cpu is allowed for this process, migrate the task to it.
  * This is accomplished by forcing the cpu_allowed mask to only
@@ -3612,7 +3643,7 @@ redo:
 		ld_moved = move_tasks(this_rq, this_cpu, busiest,
 					imbalance, sd, CPU_NEWLY_IDLE,
 					&all_pinned);
-		spin_unlock(&busiest->lock);
+		double_unlock_balance(this_rq, busiest);
 
 		if (unlikely(all_pinned)) {
 			cpu_clear(cpu_of(busiest), *cpus);
@@ -3727,7 +3758,7 @@ static void active_load_balance(struct rq *busiest_rq, int busiest_cpu)
 		else
 			schedstat_inc(sd, alb_failed);
 	}
-	spin_unlock(&target_rq->lock);
+	double_unlock_balance(busiest_rq, target_rq);
 }
 
 #ifdef CONFIG_NO_HZ
@@ -4046,6 +4077,8 @@ void account_user_time(struct task_struct *p, cputime_t cputime)
 		cpustat->nice = cputime64_add(cpustat->nice, tmp);
 	else
 		cpustat->user = cputime64_add(cpustat->user, tmp);
+	/* Account for user time used */
+	acct_update_integrals(p);
 }
 
 /*
@@ -4636,6 +4669,52 @@ int __sched wait_for_completion_killable(struct completion *x)
 }
 EXPORT_SYMBOL(wait_for_completion_killable);
 
+/**
+ *	try_wait_for_completion - try to decrement a completion without blocking
+ *	@x:	completion structure
+ *
+ *	Returns: 0 if a decrement cannot be done without blocking
+ *		 1 if a decrement succeeded.
+ *
+ *	If a completion is being used as a counting completion,
+ *	attempt to decrement the counter without blocking. This
+ *	enables us to avoid waiting if the resource the completion
+ *	is protecting is not available.
+ */
+bool try_wait_for_completion(struct completion *x)
+{
+	int ret = 1;
+
+	spin_lock_irq(&x->wait.lock);
+	if (!x->done)
+		ret = 0;
+	else
+		x->done--;
+	spin_unlock_irq(&x->wait.lock);
+	return ret;
+}
+EXPORT_SYMBOL(try_wait_for_completion);
+
+/**
+ *	completion_done - Test to see if a completion has any waiters
+ *	@x:	completion structure
+ *
+ *	Returns: 0 if there are waiters (wait_for_completion() in progress)
+ *		 1 if there are no waiters.
+ *
+ */
+bool completion_done(struct completion *x)
+{
+	int ret = 1;
+
+	spin_lock_irq(&x->wait.lock);
+	if (!x->done)
+		ret = 0;
+	spin_unlock_irq(&x->wait.lock);
+	return ret;
+}
+EXPORT_SYMBOL(completion_done);
+
 static long __sched
 sleep_on_common(wait_queue_head_t *q, int state, long timeout)
 {
@@ -4977,19 +5056,21 @@ recheck:
 			return -EPERM;
 	}
 
+	if (user) {
 #ifdef CONFIG_RT_GROUP_SCHED
-	/*
-	 * Do not allow realtime tasks into groups that have no runtime
-	 * assigned.
-	 */
-	if (user
-	    && rt_policy(policy) && task_group(p)->rt_bandwidth.rt_runtime == 0)
-		return -EPERM;
+		/*
+		 * Do not allow realtime tasks into groups that have no runtime
+		 * assigned.
+		 */
+		if (rt_policy(policy) && task_group(p)->rt_bandwidth.rt_runtime == 0)
+			return -EPERM;
 #endif
 
-	retval = security_task_setscheduler(p, policy, param);
-	if (retval)
-		return retval;
+		retval = security_task_setscheduler(p, policy, param);
+		if (retval)
+			return retval;
+	}
+
 	/*
 	 * make sure no PI-waiters arrive (or leave) while we are
 	 * changing the priority of the task:
@@ -5705,6 +5786,8 @@ static inline void sched_init_granularity(void)
 		sysctl_sched_latency = limit;
 
 	sysctl_sched_wakeup_granularity *= factor;
+
+	sysctl_sched_shares_ratelimit *= factor;
 }
 
 #ifdef CONFIG_SMP
@@ -6387,7 +6470,7 @@ static struct notifier_block __cpuinitdata migration_notifier = {
 	.priority = 10
 };
 
-void __init migration_init(void)
+static int __init migration_init(void)
 {
 	void *cpu = (void *)(long)smp_processor_id();
 	int err;
@@ -6397,7 +6480,10 @@ void __init migration_init(void)
 	BUG_ON(err == NOTIFY_BAD);
 	migration_call(&migration_notifier, CPU_ONLINE, cpu);
 	register_cpu_notifier(&migration_notifier);
+
+	return err;
 }
+early_initcall(migration_init);
 #endif
 
 #ifdef CONFIG_SMP
@@ -7641,34 +7727,34 @@ static ssize_t sched_power_savings_store(const char *buf, size_t count, int smt)
 }
 
 #ifdef CONFIG_SCHED_MC
-static ssize_t sched_mc_power_savings_show(struct sys_device *dev,
-				struct sysdev_attribute *attr, char *page)
+static ssize_t sched_mc_power_savings_show(struct sysdev_class *class,
+					   char *page)
 {
 	return sprintf(page, "%u\n", sched_mc_power_savings);
 }
-static ssize_t sched_mc_power_savings_store(struct sys_device *dev,
-					    struct sysdev_attribute *attr,
+static ssize_t sched_mc_power_savings_store(struct sysdev_class *class,
 					    const char *buf, size_t count)
 {
 	return sched_power_savings_store(buf, count, 0);
 }
-static SYSDEV_ATTR(sched_mc_power_savings, 0644, sched_mc_power_savings_show,
-		   sched_mc_power_savings_store);
+static SYSDEV_CLASS_ATTR(sched_mc_power_savings, 0644,
+			 sched_mc_power_savings_show,
+			 sched_mc_power_savings_store);
 #endif
 
 #ifdef CONFIG_SCHED_SMT
-static ssize_t sched_smt_power_savings_show(struct sys_device *dev,
-				struct sysdev_attribute *attr, char *page)
+static ssize_t sched_smt_power_savings_show(struct sysdev_class *dev,
+					    char *page)
 {
 	return sprintf(page, "%u\n", sched_smt_power_savings);
 }
-static ssize_t sched_smt_power_savings_store(struct sys_device *dev,
-					     struct sysdev_attribute *attr,
+static ssize_t sched_smt_power_savings_store(struct sysdev_class *dev,
 					     const char *buf, size_t count)
 {
 	return sched_power_savings_store(buf, count, 1);
 }
-static SYSDEV_ATTR(sched_smt_power_savings, 0644, sched_smt_power_savings_show,
+static SYSDEV_CLASS_ATTR(sched_smt_power_savings, 0644,
+		   sched_smt_power_savings_show,
 		   sched_smt_power_savings_store);
 #endif
 
@@ -7968,7 +8054,6 @@ void __init sched_init(void)
 
 		rq = cpu_rq(i);
 		spin_lock_init(&rq->lock);
-		lockdep_set_class(&rq->lock, &rq->rq_lock_key);
 		rq->nr_running = 0;
 		init_cfs_rq(&rq->cfs, rq);
 		init_rt_rq(&rq->rt, rq);
@@ -8425,8 +8510,8 @@ struct task_group *sched_create_group(struct task_group *parent)
 	WARN_ON(!parent); /* root should already exist */
 
 	tg->parent = parent;
-	list_add_rcu(&tg->siblings, &parent->children);
 	INIT_LIST_HEAD(&tg->children);
+	list_add_rcu(&tg->siblings, &parent->children);
 	spin_unlock_irqrestore(&task_group_lock, flags);
 
 	return tg;
diff --git a/kernel/sched_clock.c b/kernel/sched_clock.c
index 22ed55d1167f..e8ab096ddfe3 100644
--- a/kernel/sched_clock.c
+++ b/kernel/sched_clock.c
@@ -12,19 +12,17 @@
  *
  * Create a semi stable clock from a mixture of other events, including:
  *  - gtod
- *  - jiffies
  *  - sched_clock()
  *  - explicit idle events
  *
  * We use gtod as base and the unstable clock deltas. The deltas are filtered,
- * making it monotonic and keeping it within an expected window.  This window
- * is set up using jiffies.
+ * making it monotonic and keeping it within an expected window.
  *
  * Furthermore, explicit sleep and wakeup hooks allow us to account for time
  * that is otherwise invisible (TSC gets stopped).
  *
  * The clock: sched_clock_cpu() is monotonic per cpu, and should be somewhat
- * consistent between cpus (never more than 1 jiffies difference).
+ * consistent between cpus (never more than 2 jiffies difference).
  */
 #include <linux/sched.h>
 #include <linux/percpu.h>
@@ -32,13 +30,19 @@
 #include <linux/ktime.h>
 #include <linux/module.h>
 
+/*
+ * Scheduler clock - returns current time in nanosec units.
+ * This is default implementation.
+ * Architectures and sub-architectures can override this.
+ */
+unsigned long long __attribute__((weak)) sched_clock(void)
+{
+	return (unsigned long long)jiffies * (NSEC_PER_SEC / HZ);
+}
 
-#ifdef CONFIG_HAVE_UNSTABLE_SCHED_CLOCK
+static __read_mostly int sched_clock_running;
 
-#define MULTI_SHIFT 15
-/* Max is double, Min is 1/2 */
-#define MAX_MULTI (2LL << MULTI_SHIFT)
-#define MIN_MULTI (1LL << (MULTI_SHIFT-1))
+#ifdef CONFIG_HAVE_UNSTABLE_SCHED_CLOCK
 
 struct sched_clock_data {
 	/*
@@ -48,15 +52,9 @@ struct sched_clock_data {
 	 */
 	raw_spinlock_t		lock;
 
-	unsigned long		tick_jiffies;
-	u64			prev_raw;
 	u64			tick_raw;
 	u64			tick_gtod;
 	u64			clock;
-	s64			multi;
-#ifdef CONFIG_NO_HZ
-	int			check_max;
-#endif
 };
 
 static DEFINE_PER_CPU_SHARED_ALIGNED(struct sched_clock_data, sched_clock_data);
@@ -71,121 +69,69 @@ static inline struct sched_clock_data *cpu_sdc(int cpu)
 	return &per_cpu(sched_clock_data, cpu);
 }
 
-static __read_mostly int sched_clock_running;
-
 void sched_clock_init(void)
 {
 	u64 ktime_now = ktime_to_ns(ktime_get());
-	unsigned long now_jiffies = jiffies;
 	int cpu;
 
 	for_each_possible_cpu(cpu) {
 		struct sched_clock_data *scd = cpu_sdc(cpu);
 
 		scd->lock = (raw_spinlock_t)__RAW_SPIN_LOCK_UNLOCKED;
-		scd->tick_jiffies = now_jiffies;
-		scd->prev_raw = 0;
 		scd->tick_raw = 0;
 		scd->tick_gtod = ktime_now;
 		scd->clock = ktime_now;
-		scd->multi = 1 << MULTI_SHIFT;
-#ifdef CONFIG_NO_HZ
-		scd->check_max = 1;
-#endif
 	}
 
 	sched_clock_running = 1;
 }
 
-#ifdef CONFIG_NO_HZ
 /*
- * The dynamic ticks makes the delta jiffies inaccurate. This
- * prevents us from checking the maximum time update.
- * Disable the maximum check during stopped ticks.
+ * min,max except they take wrapping into account
  */
-void sched_clock_tick_stop(int cpu)
-{
-	struct sched_clock_data *scd = cpu_sdc(cpu);
-
-	scd->check_max = 0;
-}
 
-void sched_clock_tick_start(int cpu)
+static inline u64 wrap_min(u64 x, u64 y)
 {
-	struct sched_clock_data *scd = cpu_sdc(cpu);
-
-	scd->check_max = 1;
+	return (s64)(x - y) < 0 ? x : y;
 }
 
-static int check_max(struct sched_clock_data *scd)
+static inline u64 wrap_max(u64 x, u64 y)
 {
-	return scd->check_max;
+	return (s64)(x - y) > 0 ? x : y;
 }
-#else
-static int check_max(struct sched_clock_data *scd)
-{
-	return 1;
-}
-#endif /* CONFIG_NO_HZ */
 
 /*
  * update the percpu scd from the raw @now value
  *
  *  - filter out backward motion
- *  - use jiffies to generate a min,max window to clip the raw values
+ *  - use the GTOD tick value to create a window to filter crazy TSC values
  */
-static void __update_sched_clock(struct sched_clock_data *scd, u64 now, u64 *time)
+static u64 __update_sched_clock(struct sched_clock_data *scd, u64 now)
 {
-	unsigned long now_jiffies = jiffies;
-	long delta_jiffies = now_jiffies - scd->tick_jiffies;
-	u64 clock = scd->clock;
-	u64 min_clock, max_clock;
-	s64 delta = now - scd->prev_raw;
+	s64 delta = now - scd->tick_raw;
+	u64 clock, min_clock, max_clock;
 
 	WARN_ON_ONCE(!irqs_disabled());
 
-	/*
-	 * At schedule tick the clock can be just under the gtod. We don't
-	 * want to push it too prematurely.
-	 */
-	min_clock = scd->tick_gtod + (delta_jiffies * TICK_NSEC);
-	if (min_clock > TICK_NSEC)
-		min_clock -= TICK_NSEC / 2;
-
-	if (unlikely(delta < 0)) {
-		clock++;
-		goto out;
-	}
+	if (unlikely(delta < 0))
+		delta = 0;
 
 	/*
-	 * The clock must stay within a jiffie of the gtod.
-	 * But since we may be at the start of a jiffy or the end of one
-	 * we add another jiffy buffer.
+	 * scd->clock = clamp(scd->tick_gtod + delta,
+	 * 		      max(scd->tick_gtod, scd->clock),
+	 * 		      scd->tick_gtod + TICK_NSEC);
 	 */
-	max_clock = scd->tick_gtod + (2 + delta_jiffies) * TICK_NSEC;
 
-	delta *= scd->multi;
-	delta >>= MULTI_SHIFT;
+	clock = scd->tick_gtod + delta;
+	min_clock = wrap_max(scd->tick_gtod, scd->clock);
+	max_clock = scd->tick_gtod + TICK_NSEC;
 
-	if (unlikely(clock + delta > max_clock) && check_max(scd)) {
-		if (clock < max_clock)
-			clock = max_clock;
-		else
-			clock++;
-	} else {
-		clock += delta;
-	}
+	clock = wrap_max(clock, min_clock);
+	clock = wrap_min(clock, max_clock);
 
- out:
-	if (unlikely(clock < min_clock))
-		clock = min_clock;
+	scd->clock = clock;
 
-	if (time)
-		*time = clock;
-	else {
-		scd->prev_raw = now;
-		scd->clock = clock;
-	}
+	return scd->clock;
 }
 
 static void lock_double_clock(struct sched_clock_data *data1,
@@ -203,7 +149,7 @@ static void lock_double_clock(struct sched_clock_data *data1,
 u64 sched_clock_cpu(int cpu)
 {
 	struct sched_clock_data *scd = cpu_sdc(cpu);
-	u64 now, clock;
+	u64 now, clock, this_clock, remote_clock;
 
 	if (unlikely(!sched_clock_running))
 		return 0ull;
@@ -212,43 +158,44 @@ u64 sched_clock_cpu(int cpu)
 	now = sched_clock();
 
 	if (cpu != raw_smp_processor_id()) {
-		/*
-		 * in order to update a remote cpu's clock based on our
-		 * unstable raw time rebase it against:
-		 *   tick_raw		(offset between raw counters)
-		 *   tick_gotd          (tick offset between cpus)
-		 */
 		struct sched_clock_data *my_scd = this_scd();
 
 		lock_double_clock(scd, my_scd);
 
-		now -= my_scd->tick_raw;
-		now += scd->tick_raw;
+		this_clock = __update_sched_clock(my_scd, now);
+		remote_clock = scd->clock;
 
-		now += my_scd->tick_gtod;
-		now -= scd->tick_gtod;
+		/*
+		 * Use the opportunity that we have both locks
+		 * taken to couple the two clocks: we take the
+		 * larger time as the latest time for both
+		 * runqueues. (this creates monotonic movement)
+		 */
+		if (likely((s64)(remote_clock - this_clock) < 0)) {
+			clock = this_clock;
+			scd->clock = clock;
+		} else {
+			/*
+			 * Should be rare, but possible:
+			 */
+			clock = remote_clock;
+			my_scd->clock = remote_clock;
+		}
 
 		__raw_spin_unlock(&my_scd->lock);
-
-		__update_sched_clock(scd, now, &clock);
-
-		__raw_spin_unlock(&scd->lock);
-
 	} else {
 		__raw_spin_lock(&scd->lock);
-		__update_sched_clock(scd, now, NULL);
-		clock = scd->clock;
-		__raw_spin_unlock(&scd->lock);
+		clock = __update_sched_clock(scd, now);
 	}
 
+	__raw_spin_unlock(&scd->lock);
+
 	return clock;
 }
 
 void sched_clock_tick(void)
 {
 	struct sched_clock_data *scd = this_scd();
-	unsigned long now_jiffies = jiffies;
-	s64 mult, delta_gtod, delta_raw;
 	u64 now, now_gtod;
 
 	if (unlikely(!sched_clock_running))
@@ -260,29 +207,9 @@ void sched_clock_tick(void)
 	now = sched_clock();
 
 	__raw_spin_lock(&scd->lock);
-	__update_sched_clock(scd, now, NULL);
-	/*
-	 * update tick_gtod after __update_sched_clock() because that will
-	 * already observe 1 new jiffy; adding a new tick_gtod to that would
-	 * increase the clock 2 jiffies.
-	 */
-	delta_gtod = now_gtod - scd->tick_gtod;
-	delta_raw = now - scd->tick_raw;
-
-	if ((long)delta_raw > 0) {
-		mult = delta_gtod << MULTI_SHIFT;
-		do_div(mult, delta_raw);
-		scd->multi = mult;
-		if (scd->multi > MAX_MULTI)
-			scd->multi = MAX_MULTI;
-		else if (scd->multi < MIN_MULTI)
-			scd->multi = MIN_MULTI;
-	} else
-		scd->multi = 1 << MULTI_SHIFT;
-
 	scd->tick_raw = now;
 	scd->tick_gtod = now_gtod;
-	scd->tick_jiffies = now_jiffies;
+	__update_sched_clock(scd, now);
 	__raw_spin_unlock(&scd->lock);
 }
 
@@ -300,37 +227,28 @@ EXPORT_SYMBOL_GPL(sched_clock_idle_sleep_event);
  */
 void sched_clock_idle_wakeup_event(u64 delta_ns)
 {
-	struct sched_clock_data *scd = this_scd();
-	u64 now = sched_clock();
-
-	/*
-	 * Override the previous timestamp and ignore all
-	 * sched_clock() deltas that occured while we idled,
-	 * and use the PM-provided delta_ns to advance the
-	 * rq clock:
-	 */
-	__raw_spin_lock(&scd->lock);
-	scd->prev_raw = now;
-	scd->clock += delta_ns;
-	scd->multi = 1 << MULTI_SHIFT;
-	__raw_spin_unlock(&scd->lock);
-
+	sched_clock_tick();
 	touch_softlockup_watchdog();
 }
 EXPORT_SYMBOL_GPL(sched_clock_idle_wakeup_event);
 
-#endif
+#else /* CONFIG_HAVE_UNSTABLE_SCHED_CLOCK */
 
-/*
- * Scheduler clock - returns current time in nanosec units.
- * This is default implementation.
- * Architectures and sub-architectures can override this.
- */
-unsigned long long __attribute__((weak)) sched_clock(void)
+void sched_clock_init(void)
 {
-	return (unsigned long long)jiffies * (NSEC_PER_SEC / HZ);
+	sched_clock_running = 1;
 }
 
+u64 sched_clock_cpu(int cpu)
+{
+	if (unlikely(!sched_clock_running))
+		return 0;
+
+	return sched_clock();
+}
+
+#endif
+
 unsigned long long cpu_clock(int cpu)
 {
 	unsigned long long clock;
diff --git a/kernel/sched_fair.c b/kernel/sched_fair.c
index cf2cd6ce4cb2..fb8994c6d4bb 100644
--- a/kernel/sched_fair.c
+++ b/kernel/sched_fair.c
@@ -899,7 +899,7 @@ static void hrtick_start_fair(struct rq *rq, struct task_struct *p)
 		 * doesn't make sense. Rely on vruntime for fairness.
 		 */
 		if (rq->curr != p)
-			delta = max(10000LL, delta);
+			delta = max_t(s64, 10000LL, delta);
 
 		hrtick_start(rq, delta);
 	}
@@ -1442,18 +1442,23 @@ __load_balance_iterator(struct cfs_rq *cfs_rq, struct list_head *next)
 	struct task_struct *p = NULL;
 	struct sched_entity *se;
 
-	while (next != &cfs_rq->tasks) {
+	if (next == &cfs_rq->tasks)
+		return NULL;
+
+	/* Skip over entities that are not tasks */
+	do {
 		se = list_entry(next, struct sched_entity, group_node);
 		next = next->next;
+	} while (next != &cfs_rq->tasks && !entity_is_task(se));
 
-		/* Skip over entities that are not tasks */
-		if (entity_is_task(se)) {
-			p = task_of(se);
-			break;
-		}
-	}
+	if (next == &cfs_rq->tasks)
+		return NULL;
 
 	cfs_rq->balance_iterator = next;
+
+	if (entity_is_task(se))
+		p = task_of(se);
+
 	return p;
 }
 
diff --git a/kernel/sched_features.h b/kernel/sched_features.h
index 862b06bd560a..9353ca78154e 100644
--- a/kernel/sched_features.h
+++ b/kernel/sched_features.h
@@ -8,6 +8,6 @@ SCHED_FEAT(SYNC_WAKEUPS, 1)
 SCHED_FEAT(HRTICK, 1)
 SCHED_FEAT(DOUBLE_TICK, 0)
 SCHED_FEAT(ASYM_GRAN, 1)
-SCHED_FEAT(LB_BIAS, 0)
+SCHED_FEAT(LB_BIAS, 1)
 SCHED_FEAT(LB_WAKEUP_UPDATE, 1)
 SCHED_FEAT(ASYM_EFF_LOAD, 1)
diff --git a/kernel/sched_rt.c b/kernel/sched_rt.c
index 908c04f9dad0..552310798dad 100644
--- a/kernel/sched_rt.c
+++ b/kernel/sched_rt.c
@@ -199,6 +199,8 @@ static inline struct rt_rq *group_rt_rq(struct sched_rt_entity *rt_se)
 
 static inline void sched_rt_rq_enqueue(struct rt_rq *rt_rq)
 {
+	if (rt_rq->rt_nr_running)
+		resched_task(rq_of_rt_rq(rt_rq)->curr);
 }
 
 static inline void sched_rt_rq_dequeue(struct rt_rq *rt_rq)
@@ -298,7 +300,7 @@ static void __disable_runtime(struct rq *rq)
 			struct rt_rq *iter = sched_rt_period_rt_rq(rt_b, i);
 			s64 diff;
 
-			if (iter == rt_rq)
+			if (iter == rt_rq || iter->rt_runtime == RUNTIME_INF)
 				continue;
 
 			spin_lock(&iter->rt_runtime_lock);
@@ -438,9 +440,6 @@ static int sched_rt_runtime_exceeded(struct rt_rq *rt_rq)
 {
 	u64 runtime = sched_rt_runtime(rt_rq);
 
-	if (runtime == RUNTIME_INF)
-		return 0;
-
 	if (rt_rq->rt_throttled)
 		return rt_rq_throttled(rt_rq);
 
@@ -491,9 +490,11 @@ static void update_curr_rt(struct rq *rq)
 		rt_rq = rt_rq_of_se(rt_se);
 
 		spin_lock(&rt_rq->rt_runtime_lock);
-		rt_rq->rt_time += delta_exec;
-		if (sched_rt_runtime_exceeded(rt_rq))
-			resched_task(curr);
+		if (sched_rt_runtime(rt_rq) != RUNTIME_INF) {
+			rt_rq->rt_time += delta_exec;
+			if (sched_rt_runtime_exceeded(rt_rq))
+				resched_task(curr);
+		}
 		spin_unlock(&rt_rq->rt_runtime_lock);
 	}
 }
@@ -861,6 +862,8 @@ static void put_prev_task_rt(struct rq *rq, struct task_struct *p)
 #define RT_MAX_TRIES 3
 
 static int double_lock_balance(struct rq *this_rq, struct rq *busiest);
+static void double_unlock_balance(struct rq *this_rq, struct rq *busiest);
+
 static void deactivate_task(struct rq *rq, struct task_struct *p, int sleep);
 
 static int pick_rt_task(struct rq *rq, struct task_struct *p, int cpu)
@@ -1022,7 +1025,7 @@ static struct rq *find_lock_lowest_rq(struct task_struct *task, struct rq *rq)
 			break;
 
 		/* try again */
-		spin_unlock(&lowest_rq->lock);
+		double_unlock_balance(rq, lowest_rq);
 		lowest_rq = NULL;
 	}
 
@@ -1091,7 +1094,7 @@ static int push_rt_task(struct rq *rq)
 
 	resched_task(lowest_rq->curr);
 
-	spin_unlock(&lowest_rq->lock);
+	double_unlock_balance(rq, lowest_rq);
 
 	ret = 1;
 out:
@@ -1197,7 +1200,7 @@ static int pull_rt_task(struct rq *this_rq)
 
 		}
  skip:
-		spin_unlock(&src_rq->lock);
+		double_unlock_balance(this_rq, src_rq);
 	}
 
 	return ret;
diff --git a/kernel/semaphore.c b/kernel/semaphore.c
index aaaeae8244e7..94a62c0d4ade 100644
--- a/kernel/semaphore.c
+++ b/kernel/semaphore.c
@@ -212,9 +212,7 @@ static inline int __sched __down_common(struct semaphore *sem, long state,
 	waiter.up = 0;
 
 	for (;;) {
-		if (state == TASK_INTERRUPTIBLE && signal_pending(task))
-			goto interrupted;
-		if (state == TASK_KILLABLE && fatal_signal_pending(task))
+		if (signal_pending_state(state, task))
 			goto interrupted;
 		if (timeout <= 0)
 			goto timed_out;
diff --git a/kernel/signal.c b/kernel/signal.c
index 6c0958e52ea7..e661b01d340f 100644
--- a/kernel/signal.c
+++ b/kernel/signal.c
@@ -22,6 +22,7 @@
 #include <linux/ptrace.h>
 #include <linux/signal.h>
 #include <linux/signalfd.h>
+#include <linux/tracehook.h>
 #include <linux/capability.h>
 #include <linux/freezer.h>
 #include <linux/pid_namespace.h>
@@ -39,24 +40,21 @@
 
 static struct kmem_cache *sigqueue_cachep;
 
-static int __sig_ignored(struct task_struct *t, int sig)
+static void __user *sig_handler(struct task_struct *t, int sig)
 {
-	void __user *handler;
+	return t->sighand->action[sig - 1].sa.sa_handler;
+}
 
+static int sig_handler_ignored(void __user *handler, int sig)
+{
 	/* Is it explicitly or implicitly ignored? */
-
-	handler = t->sighand->action[sig - 1].sa.sa_handler;
 	return handler == SIG_IGN ||
 		(handler == SIG_DFL && sig_kernel_ignore(sig));
 }
 
 static int sig_ignored(struct task_struct *t, int sig)
 {
-	/*
-	 * Tracers always want to know about signals..
-	 */
-	if (t->ptrace & PT_PTRACED)
-		return 0;
+	void __user *handler;
 
 	/*
 	 * Blocked signals are never ignored, since the
@@ -66,7 +64,14 @@ static int sig_ignored(struct task_struct *t, int sig)
 	if (sigismember(&t->blocked, sig) || sigismember(&t->real_blocked, sig))
 		return 0;
 
-	return __sig_ignored(t, sig);
+	handler = sig_handler(t, sig);
+	if (!sig_handler_ignored(handler, sig))
+		return 0;
+
+	/*
+	 * Tracers may want to know about even ignored signals.
+	 */
+	return !tracehook_consider_ignored_signal(t, sig, handler);
 }
 
 /*
@@ -129,7 +134,9 @@ void recalc_sigpending_and_wake(struct task_struct *t)
 
 void recalc_sigpending(void)
 {
-	if (!recalc_sigpending_tsk(current) && !freezing(current))
+	if (unlikely(tracehook_force_sigpending()))
+		set_thread_flag(TIF_SIGPENDING);
+	else if (!recalc_sigpending_tsk(current) && !freezing(current))
 		clear_thread_flag(TIF_SIGPENDING);
 
 }
@@ -295,12 +302,12 @@ flush_signal_handlers(struct task_struct *t, int force_default)
 
 int unhandled_signal(struct task_struct *tsk, int sig)
 {
+	void __user *handler = tsk->sighand->action[sig-1].sa.sa_handler;
 	if (is_global_init(tsk))
 		return 1;
-	if (tsk->ptrace & PT_PTRACED)
+	if (handler != SIG_IGN && handler != SIG_DFL)
 		return 0;
-	return (tsk->sighand->action[sig-1].sa.sa_handler == SIG_IGN) ||
-		(tsk->sighand->action[sig-1].sa.sa_handler == SIG_DFL);
+	return !tracehook_consider_fatal_signal(tsk, sig, handler);
 }
 
 
@@ -338,13 +345,9 @@ unblock_all_signals(void)
 	spin_unlock_irqrestore(&current->sighand->siglock, flags);
 }
 
-static int collect_signal(int sig, struct sigpending *list, siginfo_t *info)
+static void collect_signal(int sig, struct sigpending *list, siginfo_t *info)
 {
 	struct sigqueue *q, *first = NULL;
-	int still_pending = 0;
-
-	if (unlikely(!sigismember(&list->signal, sig)))
-		return 0;
 
 	/*
 	 * Collect the siginfo appropriate to this signal.  Check if
@@ -352,33 +355,30 @@ static int collect_signal(int sig, struct sigpending *list, siginfo_t *info)
 	*/
 	list_for_each_entry(q, &list->list, list) {
 		if (q->info.si_signo == sig) {
-			if (first) {
-				still_pending = 1;
-				break;
-			}
+			if (first)
+				goto still_pending;
 			first = q;
 		}
 	}
+
+	sigdelset(&list->signal, sig);
+
 	if (first) {
+still_pending:
 		list_del_init(&first->list);
 		copy_siginfo(info, &first->info);
 		__sigqueue_free(first);
-		if (!still_pending)
-			sigdelset(&list->signal, sig);
 	} else {
-
 		/* Ok, it wasn't in the queue.  This must be
 		   a fast-pathed signal or we must have been
 		   out of queue space.  So zero out the info.
 		 */
-		sigdelset(&list->signal, sig);
 		info->si_signo = sig;
 		info->si_errno = 0;
 		info->si_code = 0;
 		info->si_pid = 0;
 		info->si_uid = 0;
 	}
-	return 1;
 }
 
 static int __dequeue_signal(struct sigpending *pending, sigset_t *mask,
@@ -396,8 +396,7 @@ static int __dequeue_signal(struct sigpending *pending, sigset_t *mask,
 			}
 		}
 
-		if (!collect_signal(sig, pending, info))
-			sig = 0;
+		collect_signal(sig, pending, info);
 	}
 
 	return sig;
@@ -462,8 +461,7 @@ int dequeue_signal(struct task_struct *tsk, sigset_t *mask, siginfo_t *info)
 		 * is to alert stop-signal processing code when another
 		 * processor has come along and cleared the flag.
 		 */
-		if (!(tsk->signal->flags & SIGNAL_GROUP_EXIT))
-			tsk->signal->flags |= SIGNAL_STOP_DEQUEUED;
+		tsk->signal->flags |= SIGNAL_STOP_DEQUEUED;
 	}
 	if ((info->si_code & __SI_MASK) == __SI_TIMER && info->si_sys_private) {
 		/*
@@ -600,9 +598,6 @@ static int check_kill_permission(int sig, struct siginfo *info,
 	return security_task_kill(t, info, sig, 0);
 }
 
-/* forward decl */
-static void do_notify_parent_cldstop(struct task_struct *tsk, int why);
-
 /*
  * Handle magic process-wide effects of stop/continue signals. Unlike
  * the signal actions, these happen immediately at signal-generation
@@ -765,7 +760,8 @@ static void complete_signal(int sig, struct task_struct *p, int group)
 	if (sig_fatal(p, sig) &&
 	    !(signal->flags & (SIGNAL_UNKILLABLE | SIGNAL_GROUP_EXIT)) &&
 	    !sigismember(&t->real_blocked, sig) &&
-	    (sig == SIGKILL || !(t->ptrace & PT_PTRACED))) {
+	    (sig == SIGKILL ||
+	     !tracehook_consider_fatal_signal(t, sig, SIG_DFL))) {
 		/*
 		 * This signal will be fatal to the whole group.
 		 */
@@ -1125,7 +1121,7 @@ EXPORT_SYMBOL_GPL(kill_pid_info_as_uid);
  * is probably wrong.  Should make it like BSD or SYSV.
  */
 
-static int kill_something_info(int sig, struct siginfo *info, int pid)
+static int kill_something_info(int sig, struct siginfo *info, pid_t pid)
 {
 	int ret;
 
@@ -1237,17 +1233,6 @@ int kill_pid(struct pid *pid, int sig, int priv)
 }
 EXPORT_SYMBOL(kill_pid);
 
-int
-kill_proc(pid_t pid, int sig, int priv)
-{
-	int ret;
-
-	rcu_read_lock();
-	ret = kill_pid_info(sig, __si_special(priv), find_pid(pid));
-	rcu_read_unlock();
-	return ret;
-}
-
 /*
  * These functions support sending signals using preallocated sigqueue
  * structures.  This is needed "because realtime applications cannot
@@ -1319,6 +1304,7 @@ int send_sigqueue(struct sigqueue *q, struct task_struct *t, int group)
 		q->info.si_overrun++;
 		goto out;
 	}
+	q->info.si_overrun = 0;
 
 	signalfd_notify(t, sig);
 	pending = group ? &t->signal->shared_pending : &t->pending;
@@ -1343,13 +1329,16 @@ static inline void __wake_up_parent(struct task_struct *p,
 /*
  * Let a parent know about the death of a child.
  * For a stopped/continued status change, use do_notify_parent_cldstop instead.
+ *
+ * Returns -1 if our parent ignored us and so we've switched to
+ * self-reaping, or else @sig.
  */
-
-void do_notify_parent(struct task_struct *tsk, int sig)
+int do_notify_parent(struct task_struct *tsk, int sig)
 {
 	struct siginfo info;
 	unsigned long flags;
 	struct sighand_struct *psig;
+	int ret = sig;
 
 	BUG_ON(sig == -1);
 
@@ -1379,10 +1368,9 @@ void do_notify_parent(struct task_struct *tsk, int sig)
 
 	info.si_uid = tsk->uid;
 
-	/* FIXME: find out whether or not this is supposed to be c*time. */
-	info.si_utime = cputime_to_jiffies(cputime_add(tsk->utime,
+	info.si_utime = cputime_to_clock_t(cputime_add(tsk->utime,
 						       tsk->signal->utime));
-	info.si_stime = cputime_to_jiffies(cputime_add(tsk->stime,
+	info.si_stime = cputime_to_clock_t(cputime_add(tsk->stime,
 						       tsk->signal->stime));
 
 	info.si_status = tsk->exit_code & 0x7f;
@@ -1415,14 +1403,16 @@ void do_notify_parent(struct task_struct *tsk, int sig)
 		 * is implementation-defined: we do (if you don't want
 		 * it, just use SIG_IGN instead).
 		 */
-		tsk->exit_signal = -1;
+		ret = tsk->exit_signal = -1;
 		if (psig->action[SIGCHLD-1].sa.sa_handler == SIG_IGN)
-			sig = 0;
+			sig = -1;
 	}
 	if (valid_signal(sig) && sig > 0)
 		__group_send_sig_info(sig, &info, tsk->parent);
 	__wake_up_parent(tsk, tsk->parent);
 	spin_unlock_irqrestore(&psig->siglock, flags);
+
+	return ret;
 }
 
 static void do_notify_parent_cldstop(struct task_struct *tsk, int why)
@@ -1450,9 +1440,8 @@ static void do_notify_parent_cldstop(struct task_struct *tsk, int why)
 
 	info.si_uid = tsk->uid;
 
-	/* FIXME: find out whether or not this is supposed to be c*time. */
-	info.si_utime = cputime_to_jiffies(tsk->utime);
-	info.si_stime = cputime_to_jiffies(tsk->stime);
+	info.si_utime = cputime_to_clock_t(tsk->utime);
+	info.si_stime = cputime_to_clock_t(tsk->stime);
 
  	info.si_code = why;
  	switch (why) {
@@ -1491,10 +1480,10 @@ static inline int may_ptrace_stop(void)
 	 * is a deadlock situation, and pointless because our tracer
 	 * is dead so don't allow us to stop.
 	 * If SIGKILL was already sent before the caller unlocked
-	 * ->siglock we must see ->core_waiters != 0. Otherwise it
+	 * ->siglock we must see ->core_state != NULL. Otherwise it
 	 * is safe to enter schedule().
 	 */
-	if (unlikely(current->mm->core_waiters) &&
+	if (unlikely(current->mm->core_state) &&
 	    unlikely(current->mm == current->parent->mm))
 		return 0;
 
@@ -1507,9 +1496,8 @@ static inline int may_ptrace_stop(void)
  */
 static int sigkill_pending(struct task_struct *tsk)
 {
-	return ((sigismember(&tsk->pending.signal, SIGKILL) ||
-		 sigismember(&tsk->signal->shared_pending.signal, SIGKILL)) &&
-		!unlikely(sigismember(&tsk->blocked, SIGKILL)));
+	return	sigismember(&tsk->pending.signal, SIGKILL) ||
+		sigismember(&tsk->signal->shared_pending.signal, SIGKILL);
 }
 
 /*
@@ -1525,8 +1513,6 @@ static int sigkill_pending(struct task_struct *tsk)
  */
 static void ptrace_stop(int exit_code, int clear_code, siginfo_t *info)
 {
-	int killed = 0;
-
 	if (arch_ptrace_stop_needed(exit_code, info)) {
 		/*
 		 * The arch code has something special to do before a
@@ -1542,7 +1528,8 @@ static void ptrace_stop(int exit_code, int clear_code, siginfo_t *info)
 		spin_unlock_irq(&current->sighand->siglock);
 		arch_ptrace_stop(exit_code, info);
 		spin_lock_irq(&current->sighand->siglock);
-		killed = sigkill_pending(current);
+		if (sigkill_pending(current))
+			return;
 	}
 
 	/*
@@ -1559,7 +1546,7 @@ static void ptrace_stop(int exit_code, int clear_code, siginfo_t *info)
 	__set_current_state(TASK_TRACED);
 	spin_unlock_irq(&current->sighand->siglock);
 	read_lock(&tasklist_lock);
-	if (!unlikely(killed) && may_ptrace_stop()) {
+	if (may_ptrace_stop()) {
 		do_notify_parent_cldstop(current, CLD_TRAPPED);
 		read_unlock(&tasklist_lock);
 		schedule();
@@ -1623,7 +1610,7 @@ finish_stop(int stop_count)
 	 * a group stop in progress and we are the last to stop,
 	 * report to the parent.  When ptraced, every thread reports itself.
 	 */
-	if (stop_count == 0 || (current->ptrace & PT_PTRACED)) {
+	if (tracehook_notify_jctl(stop_count == 0, CLD_STOPPED)) {
 		read_lock(&tasklist_lock);
 		do_notify_parent_cldstop(current, CLD_STOPPED);
 		read_unlock(&tasklist_lock);
@@ -1658,8 +1645,7 @@ static int do_signal_stop(int signr)
 	} else {
 		struct task_struct *t;
 
-		if (unlikely((sig->flags & (SIGNAL_STOP_DEQUEUED | SIGNAL_UNKILLABLE))
-					 != SIGNAL_STOP_DEQUEUED) ||
+		if (!likely(sig->flags & SIGNAL_STOP_DEQUEUED) ||
 		    unlikely(signal_group_exit(sig)))
 			return 0;
 		/*
@@ -1760,6 +1746,9 @@ relock:
 		signal->flags &= ~SIGNAL_CLD_MASK;
 		spin_unlock_irq(&sighand->siglock);
 
+		if (unlikely(!tracehook_notify_jctl(1, why)))
+			goto relock;
+
 		read_lock(&tasklist_lock);
 		do_notify_parent_cldstop(current->group_leader, why);
 		read_unlock(&tasklist_lock);
@@ -1773,17 +1762,33 @@ relock:
 		    do_signal_stop(0))
 			goto relock;
 
-		signr = dequeue_signal(current, &current->blocked, info);
-		if (!signr)
-			break; /* will return 0 */
+		/*
+		 * Tracing can induce an artifical signal and choose sigaction.
+		 * The return value in @signr determines the default action,
+		 * but @info->si_signo is the signal number we will report.
+		 */
+		signr = tracehook_get_signal(current, regs, info, return_ka);
+		if (unlikely(signr < 0))
+			goto relock;
+		if (unlikely(signr != 0))
+			ka = return_ka;
+		else {
+			signr = dequeue_signal(current, &current->blocked,
+					       info);
 
-		if (signr != SIGKILL) {
-			signr = ptrace_signal(signr, info, regs, cookie);
 			if (!signr)
-				continue;
+				break; /* will return 0 */
+
+			if (signr != SIGKILL) {
+				signr = ptrace_signal(signr, info,
+						      regs, cookie);
+				if (!signr)
+					continue;
+			}
+
+			ka = &sighand->action[signr-1];
 		}
 
-		ka = &sighand->action[signr-1];
 		if (ka->sa.sa_handler == SIG_IGN) /* Do nothing.  */
 			continue;
 		if (ka->sa.sa_handler != SIG_DFL) {
@@ -1831,7 +1836,7 @@ relock:
 				spin_lock_irq(&sighand->siglock);
 			}
 
-			if (likely(do_signal_stop(signr))) {
+			if (likely(do_signal_stop(info->si_signo))) {
 				/* It released the siglock.  */
 				goto relock;
 			}
@@ -1852,7 +1857,7 @@ relock:
 
 		if (sig_kernel_coredump(signr)) {
 			if (print_fatal_signals)
-				print_fatal_signal(regs, signr);
+				print_fatal_signal(regs, info->si_signo);
 			/*
 			 * If it was able to dump core, this kills all
 			 * other threads in the group and synchronizes with
@@ -1861,13 +1866,13 @@ relock:
 			 * first and our do_group_exit call below will use
 			 * that value and ignore the one we pass it.
 			 */
-			do_coredump((long)signr, signr, regs);
+			do_coredump(info->si_signo, info->si_signo, regs);
 		}
 
 		/*
 		 * Death signals, no core dump.
 		 */
-		do_group_exit(signr);
+		do_group_exit(info->si_signo);
 		/* NOTREACHED */
 	}
 	spin_unlock_irq(&sighand->siglock);
@@ -1909,7 +1914,7 @@ void exit_signals(struct task_struct *tsk)
 out:
 	spin_unlock_irq(&tsk->sighand->siglock);
 
-	if (unlikely(group_stop)) {
+	if (unlikely(group_stop) && tracehook_notify_jctl(1, CLD_STOPPED)) {
 		read_lock(&tasklist_lock);
 		do_notify_parent_cldstop(tsk, CLD_STOPPED);
 		read_unlock(&tasklist_lock);
@@ -1920,8 +1925,6 @@ EXPORT_SYMBOL(recalc_sigpending);
 EXPORT_SYMBOL_GPL(dequeue_signal);
 EXPORT_SYMBOL(flush_signals);
 EXPORT_SYMBOL(force_sig);
-EXPORT_SYMBOL(kill_proc);
-EXPORT_SYMBOL(ptrace_notify);
 EXPORT_SYMBOL(send_sig);
 EXPORT_SYMBOL(send_sig_info);
 EXPORT_SYMBOL(sigprocmask);
@@ -2196,7 +2199,7 @@ sys_rt_sigtimedwait(const sigset_t __user *uthese,
 }
 
 asmlinkage long
-sys_kill(int pid, int sig)
+sys_kill(pid_t pid, int sig)
 {
 	struct siginfo info;
 
@@ -2209,7 +2212,7 @@ sys_kill(int pid, int sig)
 	return kill_something_info(sig, &info, pid);
 }
 
-static int do_tkill(int tgid, int pid, int sig)
+static int do_tkill(pid_t tgid, pid_t pid, int sig)
 {
 	int error;
 	struct siginfo info;
@@ -2255,7 +2258,7 @@ static int do_tkill(int tgid, int pid, int sig)
  *  exists but it's not belonging to the target process anymore. This
  *  method solves the problem of threads exiting and PIDs getting reused.
  */
-asmlinkage long sys_tgkill(int tgid, int pid, int sig)
+asmlinkage long sys_tgkill(pid_t tgid, pid_t pid, int sig)
 {
 	/* This is only valid for single tasks */
 	if (pid <= 0 || tgid <= 0)
@@ -2268,7 +2271,7 @@ asmlinkage long sys_tgkill(int tgid, int pid, int sig)
  *  Send a signal to only one task, even if it's a CLONE_THREAD task.
  */
 asmlinkage long
-sys_tkill(int pid, int sig)
+sys_tkill(pid_t pid, int sig)
 {
 	/* This is only valid for single tasks */
 	if (pid <= 0)
@@ -2278,7 +2281,7 @@ sys_tkill(int pid, int sig)
 }
 
 asmlinkage long
-sys_rt_sigqueueinfo(int pid, int sig, siginfo_t __user *uinfo)
+sys_rt_sigqueueinfo(pid_t pid, int sig, siginfo_t __user *uinfo)
 {
 	siginfo_t info;
 
@@ -2325,7 +2328,7 @@ int do_sigaction(int sig, struct k_sigaction *act, struct k_sigaction *oact)
 		 *   (for example, SIGCHLD), shall cause the pending signal to
 		 *   be discarded, whether or not it is blocked"
 		 */
-		if (__sig_ignored(t, sig)) {
+		if (sig_handler_ignored(sig_handler(t, sig), sig)) {
 			sigemptyset(&mask);
 			sigaddset(&mask, sig);
 			rm_from_queue_full(&mask, &t->signal->shared_pending);
diff --git a/kernel/smp.c b/kernel/smp.c
index 462c785ca1ee..f362a8553777 100644
--- a/kernel/smp.c
+++ b/kernel/smp.c
@@ -33,7 +33,7 @@ struct call_single_queue {
 	spinlock_t lock;
 };
 
-void __cpuinit init_call_single_data(void)
+static int __cpuinit init_call_single_data(void)
 {
 	int i;
 
@@ -43,7 +43,9 @@ void __cpuinit init_call_single_data(void)
 		spin_lock_init(&q->lock);
 		INIT_LIST_HEAD(&q->list);
 	}
+	return 0;
 }
+early_initcall(init_call_single_data);
 
 static void csd_flag_wait(struct call_single_data *data)
 {
@@ -133,7 +135,8 @@ void generic_smp_call_function_interrupt(void)
 			 */
 			smp_wmb();
 			data->csd.flags &= ~CSD_FLAG_WAIT;
-		} else
+		}
+		if (data->csd.flags & CSD_FLAG_ALLOC)
 			call_rcu(&data->rcu_head, rcu_free_call_data);
 	}
 	rcu_read_unlock();
@@ -207,8 +210,10 @@ int smp_call_function_single(int cpu, void (*func) (void *info), void *info,
 {
 	struct call_single_data d;
 	unsigned long flags;
-	/* prevent preemption and reschedule on another processor */
+	/* prevent preemption and reschedule on another processor,
+	   as well as CPU removal */
 	int me = get_cpu();
+	int err = 0;
 
 	/* Can deadlock when called with interrupts disabled */
 	WARN_ON(irqs_disabled());
@@ -217,7 +222,7 @@ int smp_call_function_single(int cpu, void (*func) (void *info), void *info,
 		local_irq_save(flags);
 		func(info);
 		local_irq_restore(flags);
-	} else {
+	} else if ((unsigned)cpu < NR_CPUS && cpu_online(cpu)) {
 		struct call_single_data *data = NULL;
 
 		if (!wait) {
@@ -233,10 +238,12 @@ int smp_call_function_single(int cpu, void (*func) (void *info), void *info,
 		data->func = func;
 		data->info = info;
 		generic_exec_single(cpu, data);
+	} else {
+		err = -ENXIO;	/* CPU not online */
 	}
 
 	put_cpu();
-	return 0;
+	return err;
 }
 EXPORT_SYMBOL(smp_call_function_single);
 
@@ -258,6 +265,42 @@ void __smp_call_function_single(int cpu, struct call_single_data *data)
 	generic_exec_single(cpu, data);
 }
 
+/* Dummy function */
+static void quiesce_dummy(void *unused)
+{
+}
+
+/*
+ * Ensure stack based data used in call function mask is safe to free.
+ *
+ * This is needed by smp_call_function_mask when using on-stack data, because
+ * a single call function queue is shared by all CPUs, and any CPU may pick up
+ * the data item on the queue at any time before it is deleted. So we need to
+ * ensure that all CPUs have transitioned through a quiescent state after
+ * this call.
+ *
+ * This is a very slow function, implemented by sending synchronous IPIs to
+ * all possible CPUs. For this reason, we have to alloc data rather than use
+ * stack based data even in the case of synchronous calls. The stack based
+ * data is then just used for deadlock/oom fallback which will be very rare.
+ *
+ * If a faster scheme can be made, we could go back to preferring stack based
+ * data -- the data allocation/free is non-zero cost.
+ */
+static void smp_call_function_mask_quiesce_stack(cpumask_t mask)
+{
+	struct call_single_data data;
+	int cpu;
+
+	data.func = quiesce_dummy;
+	data.info = NULL;
+
+	for_each_cpu_mask(cpu, mask) {
+		data.flags = CSD_FLAG_WAIT;
+		generic_exec_single(cpu, &data);
+	}
+}
+
 /**
  * smp_call_function_mask(): Run a function on a set of other CPUs.
  * @mask: The set of cpus to run on.
@@ -283,6 +326,7 @@ int smp_call_function_mask(cpumask_t mask, void (*func)(void *), void *info,
 	cpumask_t allbutself;
 	unsigned long flags;
 	int cpu, num_cpus;
+	int slowpath = 0;
 
 	/* Can deadlock when called with interrupts disabled */
 	WARN_ON(irqs_disabled());
@@ -304,15 +348,16 @@ int smp_call_function_mask(cpumask_t mask, void (*func)(void *), void *info,
 		return smp_call_function_single(cpu, func, info, wait);
 	}
 
-	if (!wait) {
-		data = kmalloc(sizeof(*data), GFP_ATOMIC);
-		if (data)
-			data->csd.flags = CSD_FLAG_ALLOC;
-	}
-	if (!data) {
+	data = kmalloc(sizeof(*data), GFP_ATOMIC);
+	if (data) {
+		data->csd.flags = CSD_FLAG_ALLOC;
+		if (wait)
+			data->csd.flags |= CSD_FLAG_WAIT;
+	} else {
 		data = &d;
 		data->csd.flags = CSD_FLAG_WAIT;
 		wait = 1;
+		slowpath = 1;
 	}
 
 	spin_lock_init(&data->lock);
@@ -329,8 +374,11 @@ int smp_call_function_mask(cpumask_t mask, void (*func)(void *), void *info,
 	arch_send_call_function_ipi(mask);
 
 	/* optionally wait for the CPUs to complete */
-	if (wait)
+	if (wait) {
 		csd_flag_wait(&data->csd);
+		if (unlikely(slowpath))
+			smp_call_function_mask_quiesce_stack(mask);
+	}
 
 	return 0;
 }
diff --git a/kernel/softirq.c b/kernel/softirq.c
index f6b03d56c2bf..c506f266a6b9 100644
--- a/kernel/softirq.c
+++ b/kernel/softirq.c
@@ -630,7 +630,7 @@ static struct notifier_block __cpuinitdata cpu_nfb = {
 	.notifier_call = cpu_callback
 };
 
-__init int spawn_ksoftirqd(void)
+static __init int spawn_ksoftirqd(void)
 {
 	void *cpu = (void *)(long)smp_processor_id();
 	int err = cpu_callback(&cpu_nfb, CPU_UP_PREPARE, cpu);
@@ -640,6 +640,7 @@ __init int spawn_ksoftirqd(void)
 	register_cpu_notifier(&cpu_nfb);
 	return 0;
 }
+early_initcall(spawn_ksoftirqd);
 
 #ifdef CONFIG_SMP
 /*
diff --git a/kernel/softlockup.c b/kernel/softlockup.c
index 7bd8d1aadd5d..cb838ee93a82 100644
--- a/kernel/softlockup.c
+++ b/kernel/softlockup.c
@@ -233,7 +233,8 @@ static void check_hung_uninterruptible_tasks(int this_cpu)
 	do_each_thread(g, t) {
 		if (!--max_count)
 			goto unlock;
-		if (t->state & TASK_UNINTERRUPTIBLE)
+		/* use "==" to skip the TASK_KILLABLE tasks waiting on NFS */
+		if (t->state == TASK_UNINTERRUPTIBLE)
 			check_hung_task(t, now);
 	} while_each_thread(g, t);
  unlock:
@@ -338,14 +339,33 @@ static struct notifier_block __cpuinitdata cpu_nfb = {
 	.notifier_call = cpu_callback
 };
 
-__init void spawn_softlockup_task(void)
+static int __initdata nosoftlockup;
+
+static int __init nosoftlockup_setup(char *str)
+{
+	nosoftlockup = 1;
+	return 1;
+}
+__setup("nosoftlockup", nosoftlockup_setup);
+
+static int __init spawn_softlockup_task(void)
 {
 	void *cpu = (void *)(long)smp_processor_id();
-	int err = cpu_callback(&cpu_nfb, CPU_UP_PREPARE, cpu);
+	int err;
 
-	BUG_ON(err == NOTIFY_BAD);
+	if (nosoftlockup)
+		return 0;
+
+	err = cpu_callback(&cpu_nfb, CPU_UP_PREPARE, cpu);
+	if (err == NOTIFY_BAD) {
+		BUG();
+		return 1;
+	}
 	cpu_callback(&cpu_nfb, CPU_ONLINE, cpu);
 	register_cpu_notifier(&cpu_nfb);
 
 	atomic_notifier_chain_register(&panic_notifier_list, &panic_block);
+
+	return 0;
 }
+early_initcall(spawn_softlockup_task);
diff --git a/kernel/spinlock.c b/kernel/spinlock.c
index a1fb54c93cdd..29ab20749dd3 100644
--- a/kernel/spinlock.c
+++ b/kernel/spinlock.c
@@ -290,8 +290,8 @@ void __lockfunc _spin_lock_nested(spinlock_t *lock, int subclass)
 	spin_acquire(&lock->dep_map, subclass, 0, _RET_IP_);
 	LOCK_CONTENDED(lock, _raw_spin_trylock, _raw_spin_lock);
 }
-
 EXPORT_SYMBOL(_spin_lock_nested);
+
 unsigned long __lockfunc _spin_lock_irqsave_nested(spinlock_t *lock, int subclass)
 {
 	unsigned long flags;
@@ -311,9 +311,17 @@ unsigned long __lockfunc _spin_lock_irqsave_nested(spinlock_t *lock, int subclas
 #endif
 	return flags;
 }
-
 EXPORT_SYMBOL(_spin_lock_irqsave_nested);
 
+void __lockfunc _spin_lock_nest_lock(spinlock_t *lock,
+				     struct lockdep_map *nest_lock)
+{
+	preempt_disable();
+	spin_acquire_nest(&lock->dep_map, 0, 0, nest_lock, _RET_IP_);
+	LOCK_CONTENDED(lock, _raw_spin_trylock, _raw_spin_lock);
+}
+EXPORT_SYMBOL(_spin_lock_nest_lock);
+
 #endif
 
 void __lockfunc _spin_unlock(spinlock_t *lock)
diff --git a/kernel/stop_machine.c b/kernel/stop_machine.c
index 738b411ff2d3..af3c7cea258b 100644
--- a/kernel/stop_machine.c
+++ b/kernel/stop_machine.c
@@ -1,4 +1,4 @@
-/* Copyright 2005 Rusty Russell rusty@rustcorp.com.au IBM Corporation.
+/* Copyright 2008, 2005 Rusty Russell rusty@rustcorp.com.au IBM Corporation.
  * GPL v2 and any later version.
  */
 #include <linux/cpu.h>
@@ -13,204 +13,177 @@
 #include <asm/atomic.h>
 #include <asm/uaccess.h>
 
-/* Since we effect priority and affinity (both of which are visible
- * to, and settable by outside processes) we do indirection via a
- * kthread. */
-
-/* Thread to stop each CPU in user context. */
+/* This controls the threads on each CPU. */
 enum stopmachine_state {
-	STOPMACHINE_WAIT,
+	/* Dummy starting state for thread. */
+	STOPMACHINE_NONE,
+	/* Awaiting everyone to be scheduled. */
 	STOPMACHINE_PREPARE,
+	/* Disable interrupts. */
 	STOPMACHINE_DISABLE_IRQ,
+	/* Run the function */
+	STOPMACHINE_RUN,
+	/* Exit */
 	STOPMACHINE_EXIT,
 };
+static enum stopmachine_state state;
 
-static enum stopmachine_state stopmachine_state;
-static unsigned int stopmachine_num_threads;
-static atomic_t stopmachine_thread_ack;
-
-static int stopmachine(void *cpu)
-{
-	int irqs_disabled = 0;
-	int prepared = 0;
-	cpumask_of_cpu_ptr(cpumask, (int)(long)cpu);
-
-	set_cpus_allowed_ptr(current, cpumask);
-
-	/* Ack: we are alive */
-	smp_mb(); /* Theoretically the ack = 0 might not be on this CPU yet. */
-	atomic_inc(&stopmachine_thread_ack);
-
-	/* Simple state machine */
-	while (stopmachine_state != STOPMACHINE_EXIT) {
-		if (stopmachine_state == STOPMACHINE_DISABLE_IRQ 
-		    && !irqs_disabled) {
-			local_irq_disable();
-			hard_irq_disable();
-			irqs_disabled = 1;
-			/* Ack: irqs disabled. */
-			smp_mb(); /* Must read state first. */
-			atomic_inc(&stopmachine_thread_ack);
-		} else if (stopmachine_state == STOPMACHINE_PREPARE
-			   && !prepared) {
-			/* Everyone is in place, hold CPU. */
-			preempt_disable();
-			prepared = 1;
-			smp_mb(); /* Must read state first. */
-			atomic_inc(&stopmachine_thread_ack);
-		}
-		/* Yield in first stage: migration threads need to
-		 * help our sisters onto their CPUs. */
-		if (!prepared && !irqs_disabled)
-			yield();
-		cpu_relax();
-	}
-
-	/* Ack: we are exiting. */
-	smp_mb(); /* Must read state first. */
-	atomic_inc(&stopmachine_thread_ack);
-
-	if (irqs_disabled)
-		local_irq_enable();
-	if (prepared)
-		preempt_enable();
+struct stop_machine_data {
+	int (*fn)(void *);
+	void *data;
+	int fnret;
+};
 
-	return 0;
-}
+/* Like num_online_cpus(), but hotplug cpu uses us, so we need this. */
+static unsigned int num_threads;
+static atomic_t thread_ack;
+static struct completion finished;
+static DEFINE_MUTEX(lock);
 
-/* Change the thread state */
-static void stopmachine_set_state(enum stopmachine_state state)
+static void set_state(enum stopmachine_state newstate)
 {
-	atomic_set(&stopmachine_thread_ack, 0);
+	/* Reset ack counter. */
+	atomic_set(&thread_ack, num_threads);
 	smp_wmb();
-	stopmachine_state = state;
-	while (atomic_read(&stopmachine_thread_ack) != stopmachine_num_threads)
-		cpu_relax();
+	state = newstate;
 }
 
-static int stop_machine(void)
+/* Last one to ack a state moves to the next state. */
+static void ack_state(void)
 {
-	int i, ret = 0;
-
-	atomic_set(&stopmachine_thread_ack, 0);
-	stopmachine_num_threads = 0;
-	stopmachine_state = STOPMACHINE_WAIT;
-
-	for_each_online_cpu(i) {
-		if (i == raw_smp_processor_id())
-			continue;
-		ret = kernel_thread(stopmachine, (void *)(long)i,CLONE_KERNEL);
-		if (ret < 0)
-			break;
-		stopmachine_num_threads++;
-	}
-
-	/* Wait for them all to come to life. */
-	while (atomic_read(&stopmachine_thread_ack) != stopmachine_num_threads) {
-		yield();
-		cpu_relax();
+	if (atomic_dec_and_test(&thread_ack)) {
+		/* If we're the last one to ack the EXIT, we're finished. */
+		if (state == STOPMACHINE_EXIT)
+			complete(&finished);
+		else
+			set_state(state + 1);
 	}
+}
 
-	/* If some failed, kill them all. */
-	if (ret < 0) {
-		stopmachine_set_state(STOPMACHINE_EXIT);
-		return ret;
-	}
+/* This is the actual thread which stops the CPU.  It exits by itself rather
+ * than waiting for kthread_stop(), because it's easier for hotplug CPU. */
+static int stop_cpu(struct stop_machine_data *smdata)
+{
+	enum stopmachine_state curstate = STOPMACHINE_NONE;
 
-	/* Now they are all started, make them hold the CPUs, ready. */
-	preempt_disable();
-	stopmachine_set_state(STOPMACHINE_PREPARE);
+	/* Simple state machine */
+	do {
+		/* Chill out and ensure we re-read stopmachine_state. */
+		cpu_relax();
+		if (state != curstate) {
+			curstate = state;
+			switch (curstate) {
+			case STOPMACHINE_DISABLE_IRQ:
+				local_irq_disable();
+				hard_irq_disable();
+				break;
+			case STOPMACHINE_RUN:
+				/* |= allows error detection if functions on
+				 * multiple CPUs. */
+				smdata->fnret |= smdata->fn(smdata->data);
+				break;
+			default:
+				break;
+			}
+			ack_state();
+		}
+	} while (curstate != STOPMACHINE_EXIT);
 
-	/* Make them disable irqs. */
-	local_irq_disable();
-	hard_irq_disable();
-	stopmachine_set_state(STOPMACHINE_DISABLE_IRQ);
+	local_irq_enable();
+	do_exit(0);
+}
 
+/* Callback for CPUs which aren't supposed to do anything. */
+static int chill(void *unused)
+{
 	return 0;
 }
 
-static void restart_machine(void)
+int __stop_machine(int (*fn)(void *), void *data, const cpumask_t *cpus)
 {
-	stopmachine_set_state(STOPMACHINE_EXIT);
-	local_irq_enable();
-	preempt_enable_no_resched();
-}
+	int i, err;
+	struct stop_machine_data active, idle;
+	struct task_struct **threads;
+
+	active.fn = fn;
+	active.data = data;
+	active.fnret = 0;
+	idle.fn = chill;
+	idle.data = NULL;
+
+	/* This could be too big for stack on large machines. */
+	threads = kcalloc(NR_CPUS, sizeof(threads[0]), GFP_KERNEL);
+	if (!threads)
+		return -ENOMEM;
+
+	/* Set up initial state. */
+	mutex_lock(&lock);
+	init_completion(&finished);
+	num_threads = num_online_cpus();
+	set_state(STOPMACHINE_PREPARE);
 
-struct stop_machine_data {
-	int (*fn)(void *);
-	void *data;
-	struct completion done;
-};
+	for_each_online_cpu(i) {
+		struct stop_machine_data *smdata = &idle;
+		struct sched_param param = { .sched_priority = MAX_RT_PRIO-1 };
 
-static int do_stop(void *_smdata)
-{
-	struct stop_machine_data *smdata = _smdata;
-	int ret;
+		if (!cpus) {
+			if (i == first_cpu(cpu_online_map))
+				smdata = &active;
+		} else {
+			if (cpu_isset(i, *cpus))
+				smdata = &active;
+		}
 
-	ret = stop_machine();
-	if (ret == 0) {
-		ret = smdata->fn(smdata->data);
-		restart_machine();
-	}
+		threads[i] = kthread_create((void *)stop_cpu, smdata, "kstop%u",
+					    i);
+		if (IS_ERR(threads[i])) {
+			err = PTR_ERR(threads[i]);
+			threads[i] = NULL;
+			goto kill_threads;
+		}
 
-	/* We're done: you can kthread_stop us now */
-	complete(&smdata->done);
+		/* Place it onto correct cpu. */
+		kthread_bind(threads[i], i);
 
-	/* Wait for kthread_stop */
-	set_current_state(TASK_INTERRUPTIBLE);
-	while (!kthread_should_stop()) {
-		schedule();
-		set_current_state(TASK_INTERRUPTIBLE);
+		/* Make it highest prio. */
+		if (sched_setscheduler_nocheck(threads[i], SCHED_FIFO, &param))
+			BUG();
 	}
-	__set_current_state(TASK_RUNNING);
-	return ret;
-}
 
-struct task_struct *__stop_machine_run(int (*fn)(void *), void *data,
-				       unsigned int cpu)
-{
-	static DEFINE_MUTEX(stopmachine_mutex);
-	struct stop_machine_data smdata;
-	struct task_struct *p;
+	/* We've created all the threads.  Wake them all: hold this CPU so one
+	 * doesn't hit this CPU until we're ready. */
+	get_cpu();
+	for_each_online_cpu(i)
+		wake_up_process(threads[i]);
 
-	smdata.fn = fn;
-	smdata.data = data;
-	init_completion(&smdata.done);
+	/* This will release the thread on our CPU. */
+	put_cpu();
+	wait_for_completion(&finished);
+	mutex_unlock(&lock);
 
-	mutex_lock(&stopmachine_mutex);
+	kfree(threads);
 
-	/* If they don't care which CPU fn runs on, bind to any online one. */
-	if (cpu == NR_CPUS)
-		cpu = raw_smp_processor_id();
+	return active.fnret;
 
-	p = kthread_create(do_stop, &smdata, "kstopmachine");
-	if (!IS_ERR(p)) {
-		struct sched_param param = { .sched_priority = MAX_RT_PRIO-1 };
+kill_threads:
+	for_each_online_cpu(i)
+		if (threads[i])
+			kthread_stop(threads[i]);
+	mutex_unlock(&lock);
 
-		/* One high-prio thread per cpu.  We'll do this one. */
-		sched_setscheduler_nocheck(p, SCHED_FIFO, &param);
-		kthread_bind(p, cpu);
-		wake_up_process(p);
-		wait_for_completion(&smdata.done);
-	}
-	mutex_unlock(&stopmachine_mutex);
-	return p;
+	kfree(threads);
+	return err;
 }
 
-int stop_machine_run(int (*fn)(void *), void *data, unsigned int cpu)
+int stop_machine(int (*fn)(void *), void *data, const cpumask_t *cpus)
 {
-	struct task_struct *p;
 	int ret;
 
 	/* No CPUs can come up or down during this. */
 	get_online_cpus();
-	p = __stop_machine_run(fn, data, cpu);
-	if (!IS_ERR(p))
-		ret = kthread_stop(p);
-	else
-		ret = PTR_ERR(p);
+	ret = __stop_machine(fn, data, cpus);
 	put_online_cpus();
 
 	return ret;
 }
-EXPORT_SYMBOL_GPL(stop_machine_run);
+EXPORT_SYMBOL_GPL(stop_machine);
diff --git a/kernel/sys.c b/kernel/sys.c
index 14e97282eb6c..038a7bc0901d 100644
--- a/kernel/sys.c
+++ b/kernel/sys.c
@@ -169,9 +169,9 @@ asmlinkage long sys_setpriority(int which, int who, int niceval)
 				pgrp = find_vpid(who);
 			else
 				pgrp = task_pgrp(current);
-			do_each_pid_task(pgrp, PIDTYPE_PGID, p) {
+			do_each_pid_thread(pgrp, PIDTYPE_PGID, p) {
 				error = set_one_prio(p, niceval, error);
-			} while_each_pid_task(pgrp, PIDTYPE_PGID, p);
+			} while_each_pid_thread(pgrp, PIDTYPE_PGID, p);
 			break;
 		case PRIO_USER:
 			user = current->user;
@@ -229,11 +229,11 @@ asmlinkage long sys_getpriority(int which, int who)
 				pgrp = find_vpid(who);
 			else
 				pgrp = task_pgrp(current);
-			do_each_pid_task(pgrp, PIDTYPE_PGID, p) {
+			do_each_pid_thread(pgrp, PIDTYPE_PGID, p) {
 				niceval = 20 - task_nice(p);
 				if (niceval > retval)
 					retval = niceval;
-			} while_each_pid_task(pgrp, PIDTYPE_PGID, p);
+			} while_each_pid_thread(pgrp, PIDTYPE_PGID, p);
 			break;
 		case PRIO_USER:
 			user = current->user;
@@ -274,7 +274,7 @@ void emergency_restart(void)
 }
 EXPORT_SYMBOL_GPL(emergency_restart);
 
-static void kernel_restart_prepare(char *cmd)
+void kernel_restart_prepare(char *cmd)
 {
 	blocking_notifier_call_chain(&reboot_notifier_list, SYS_RESTART, cmd);
 	system_state = SYSTEM_RESTART;
@@ -301,26 +301,6 @@ void kernel_restart(char *cmd)
 }
 EXPORT_SYMBOL_GPL(kernel_restart);
 
-/**
- *	kernel_kexec - reboot the system
- *
- *	Move into place and start executing a preloaded standalone
- *	executable.  If nothing was preloaded return an error.
- */
-static void kernel_kexec(void)
-{
-#ifdef CONFIG_KEXEC
-	struct kimage *image;
-	image = xchg(&kexec_image, NULL);
-	if (!image)
-		return;
-	kernel_restart_prepare(NULL);
-	printk(KERN_EMERG "Starting new kernel\n");
-	machine_shutdown();
-	machine_kexec(image);
-#endif
-}
-
 static void kernel_shutdown_prepare(enum system_states state)
 {
 	blocking_notifier_call_chain(&reboot_notifier_list,
@@ -425,10 +405,15 @@ asmlinkage long sys_reboot(int magic1, int magic2, unsigned int cmd, void __user
 		kernel_restart(buffer);
 		break;
 
+#ifdef CONFIG_KEXEC
 	case LINUX_REBOOT_CMD_KEXEC:
-		kernel_kexec();
-		unlock_kernel();
-		return -EINVAL;
+		{
+			int ret;
+			ret = kernel_kexec();
+			unlock_kernel();
+			return ret;
+		}
+#endif
 
 #ifdef CONFIG_HIBERNATION
 	case LINUX_REBOOT_CMD_SW_SUSPEND:
@@ -1343,8 +1328,6 @@ EXPORT_SYMBOL(in_egroup_p);
 
 DECLARE_RWSEM(uts_sem);
 
-EXPORT_SYMBOL(uts_sem);
-
 asmlinkage long sys_newuname(struct new_utsname __user * name)
 {
 	int errno = 0;
@@ -1795,7 +1778,7 @@ int orderly_poweroff(bool force)
 		goto out;
 	}
 
-	info = call_usermodehelper_setup(argv[0], argv, envp);
+	info = call_usermodehelper_setup(argv[0], argv, envp, GFP_ATOMIC);
 	if (info == NULL) {
 		argv_free(argv);
 		goto out;
diff --git a/kernel/sys_ni.c b/kernel/sys_ni.c
index bd66ac5406f3..08d6e1bb99ac 100644
--- a/kernel/sys_ni.c
+++ b/kernel/sys_ni.c
@@ -57,6 +57,7 @@ cond_syscall(compat_sys_set_robust_list);
 cond_syscall(sys_get_robust_list);
 cond_syscall(compat_sys_get_robust_list);
 cond_syscall(sys_epoll_create);
+cond_syscall(sys_epoll_create1);
 cond_syscall(sys_epoll_ctl);
 cond_syscall(sys_epoll_wait);
 cond_syscall(sys_epoll_pwait);
@@ -159,6 +160,7 @@ cond_syscall(sys_ioprio_get);
 cond_syscall(sys_signalfd);
 cond_syscall(sys_signalfd4);
 cond_syscall(compat_sys_signalfd);
+cond_syscall(compat_sys_signalfd4);
 cond_syscall(sys_timerfd_create);
 cond_syscall(sys_timerfd_settime);
 cond_syscall(sys_timerfd_gettime);
diff --git a/kernel/sysctl.c b/kernel/sysctl.c
index 1a8299d1fe59..50ec0886fa3d 100644
--- a/kernel/sysctl.c
+++ b/kernel/sysctl.c
@@ -159,13 +159,15 @@ static int proc_dointvec_taint(struct ctl_table *table, int write, struct file *
 static struct ctl_table root_table[];
 static struct ctl_table_root sysctl_table_root;
 static struct ctl_table_header root_table_header = {
+	.count = 1,
 	.ctl_table = root_table,
-	.ctl_entry = LIST_HEAD_INIT(sysctl_table_root.header_list),
+	.ctl_entry = LIST_HEAD_INIT(sysctl_table_root.default_set.list),
 	.root = &sysctl_table_root,
+	.set = &sysctl_table_root.default_set,
 };
 static struct ctl_table_root sysctl_table_root = {
 	.root_list = LIST_HEAD_INIT(sysctl_table_root.root_list),
-	.header_list = LIST_HEAD_INIT(root_table_header.ctl_entry),
+	.default_set.list = LIST_HEAD_INIT(root_table_header.ctl_entry),
 };
 
 static struct ctl_table kern_table[];
@@ -624,7 +626,7 @@ static struct ctl_table kern_table[] = {
 	{
 		.ctl_name	= KERN_PRINTK_RATELIMIT,
 		.procname	= "printk_ratelimit",
-		.data		= &printk_ratelimit_jiffies,
+		.data		= &printk_ratelimit_state.interval,
 		.maxlen		= sizeof(int),
 		.mode		= 0644,
 		.proc_handler	= &proc_dointvec_jiffies,
@@ -633,7 +635,7 @@ static struct ctl_table kern_table[] = {
 	{
 		.ctl_name	= KERN_PRINTK_RATELIMIT_BURST,
 		.procname	= "printk_ratelimit_burst",
-		.data		= &printk_ratelimit_burst,
+		.data		= &printk_ratelimit_state.burst,
 		.maxlen		= sizeof(int),
 		.mode		= 0644,
 		.proc_handler	= &proc_dointvec,
@@ -1386,6 +1388,9 @@ static void start_unregistering(struct ctl_table_header *p)
 		spin_unlock(&sysctl_lock);
 		wait_for_completion(&wait);
 		spin_lock(&sysctl_lock);
+	} else {
+		/* anything non-NULL; we'll never dereference it */
+		p->unregistering = ERR_PTR(-EINVAL);
 	}
 	/*
 	 * do not remove from the list until nobody holds it; walking the
@@ -1394,6 +1399,32 @@ static void start_unregistering(struct ctl_table_header *p)
 	list_del_init(&p->ctl_entry);
 }
 
+void sysctl_head_get(struct ctl_table_header *head)
+{
+	spin_lock(&sysctl_lock);
+	head->count++;
+	spin_unlock(&sysctl_lock);
+}
+
+void sysctl_head_put(struct ctl_table_header *head)
+{
+	spin_lock(&sysctl_lock);
+	if (!--head->count)
+		kfree(head);
+	spin_unlock(&sysctl_lock);
+}
+
+struct ctl_table_header *sysctl_head_grab(struct ctl_table_header *head)
+{
+	if (!head)
+		BUG();
+	spin_lock(&sysctl_lock);
+	if (!use_table(head))
+		head = ERR_PTR(-ENOENT);
+	spin_unlock(&sysctl_lock);
+	return head;
+}
+
 void sysctl_head_finish(struct ctl_table_header *head)
 {
 	if (!head)
@@ -1403,14 +1434,20 @@ void sysctl_head_finish(struct ctl_table_header *head)
 	spin_unlock(&sysctl_lock);
 }
 
+static struct ctl_table_set *
+lookup_header_set(struct ctl_table_root *root, struct nsproxy *namespaces)
+{
+	struct ctl_table_set *set = &root->default_set;
+	if (root->lookup)
+		set = root->lookup(root, namespaces);
+	return set;
+}
+
 static struct list_head *
 lookup_header_list(struct ctl_table_root *root, struct nsproxy *namespaces)
 {
-	struct list_head *header_list;
-	header_list = &root->header_list;
-	if (root->lookup)
-		header_list = root->lookup(root, namespaces);
-	return header_list;
+	struct ctl_table_set *set = lookup_header_set(root, namespaces);
+	return &set->list;
 }
 
 struct ctl_table_header *__sysctl_head_next(struct nsproxy *namespaces,
@@ -1480,9 +1517,9 @@ static int do_sysctl_strategy(struct ctl_table_root *root,
 	int op = 0, rc;
 
 	if (oldval)
-		op |= 004;
+		op |= MAY_READ;
 	if (newval)
-		op |= 002;
+		op |= MAY_WRITE;
 	if (sysctl_perm(root, table, op))
 		return -EPERM;
 
@@ -1524,7 +1561,7 @@ repeat:
 		if (n == table->ctl_name) {
 			int error;
 			if (table->child) {
-				if (sysctl_perm(root, table, 001))
+				if (sysctl_perm(root, table, MAY_EXEC))
 					return -EPERM;
 				name++;
 				nlen--;
@@ -1599,7 +1636,7 @@ static int test_perm(int mode, int op)
 		mode >>= 6;
 	else if (in_egroup_p(0))
 		mode >>= 3;
-	if ((mode & op & 0007) == op)
+	if ((op & ~mode & (MAY_READ|MAY_WRITE|MAY_EXEC)) == 0)
 		return 0;
 	return -EACCES;
 }
@@ -1609,7 +1646,7 @@ int sysctl_perm(struct ctl_table_root *root, struct ctl_table *table, int op)
 	int error;
 	int mode;
 
-	error = security_sysctl(table, op);
+	error = security_sysctl(table, op & (MAY_READ | MAY_WRITE | MAY_EXEC));
 	if (error)
 		return error;
 
@@ -1644,6 +1681,54 @@ static __init int sysctl_init(void)
 
 core_initcall(sysctl_init);
 
+static struct ctl_table *is_branch_in(struct ctl_table *branch,
+				      struct ctl_table *table)
+{
+	struct ctl_table *p;
+	const char *s = branch->procname;
+
+	/* branch should have named subdirectory as its first element */
+	if (!s || !branch->child)
+		return NULL;
+
+	/* ... and nothing else */
+	if (branch[1].procname || branch[1].ctl_name)
+		return NULL;
+
+	/* table should contain subdirectory with the same name */
+	for (p = table; p->procname || p->ctl_name; p++) {
+		if (!p->child)
+			continue;
+		if (p->procname && strcmp(p->procname, s) == 0)
+			return p;
+	}
+	return NULL;
+}
+
+/* see if attaching q to p would be an improvement */
+static void try_attach(struct ctl_table_header *p, struct ctl_table_header *q)
+{
+	struct ctl_table *to = p->ctl_table, *by = q->ctl_table;
+	struct ctl_table *next;
+	int is_better = 0;
+	int not_in_parent = !p->attached_by;
+
+	while ((next = is_branch_in(by, to)) != NULL) {
+		if (by == q->attached_by)
+			is_better = 1;
+		if (to == p->attached_by)
+			not_in_parent = 1;
+		by = by->child;
+		to = next->child;
+	}
+
+	if (is_better && not_in_parent) {
+		q->attached_by = by;
+		q->attached_to = to;
+		q->parent = p;
+	}
+}
+
 /**
  * __register_sysctl_paths - register a sysctl hierarchy
  * @root: List of sysctl headers to register on
@@ -1720,10 +1805,10 @@ struct ctl_table_header *__register_sysctl_paths(
 	struct nsproxy *namespaces,
 	const struct ctl_path *path, struct ctl_table *table)
 {
-	struct list_head *header_list;
 	struct ctl_table_header *header;
 	struct ctl_table *new, **prevp;
 	unsigned int n, npath;
+	struct ctl_table_set *set;
 
 	/* Count the path components */
 	for (npath = 0; path[npath].ctl_name || path[npath].procname; ++npath)
@@ -1765,6 +1850,7 @@ struct ctl_table_header *__register_sysctl_paths(
 	header->unregistering = NULL;
 	header->root = root;
 	sysctl_set_parent(NULL, header->ctl_table);
+	header->count = 1;
 #ifdef CONFIG_SYSCTL_SYSCALL_CHECK
 	if (sysctl_check_table(namespaces, header->ctl_table)) {
 		kfree(header);
@@ -1772,8 +1858,20 @@ struct ctl_table_header *__register_sysctl_paths(
 	}
 #endif
 	spin_lock(&sysctl_lock);
-	header_list = lookup_header_list(root, namespaces);
-	list_add_tail(&header->ctl_entry, header_list);
+	header->set = lookup_header_set(root, namespaces);
+	header->attached_by = header->ctl_table;
+	header->attached_to = root_table;
+	header->parent = &root_table_header;
+	for (set = header->set; set; set = set->parent) {
+		struct ctl_table_header *p;
+		list_for_each_entry(p, &set->list, ctl_entry) {
+			if (p->unregistering)
+				continue;
+			try_attach(p, header);
+		}
+	}
+	header->parent->count++;
+	list_add_tail(&header->ctl_entry, &header->set->list);
 	spin_unlock(&sysctl_lock);
 
 	return header;
@@ -1828,8 +1926,37 @@ void unregister_sysctl_table(struct ctl_table_header * header)
 
 	spin_lock(&sysctl_lock);
 	start_unregistering(header);
+	if (!--header->parent->count) {
+		WARN_ON(1);
+		kfree(header->parent);
+	}
+	if (!--header->count)
+		kfree(header);
 	spin_unlock(&sysctl_lock);
-	kfree(header);
+}
+
+int sysctl_is_seen(struct ctl_table_header *p)
+{
+	struct ctl_table_set *set = p->set;
+	int res;
+	spin_lock(&sysctl_lock);
+	if (p->unregistering)
+		res = 0;
+	else if (!set->is_seen)
+		res = 1;
+	else
+		res = set->is_seen(set);
+	spin_unlock(&sysctl_lock);
+	return res;
+}
+
+void setup_sysctl_set(struct ctl_table_set *p,
+	struct ctl_table_set *parent,
+	int (*is_seen)(struct ctl_table_set *))
+{
+	INIT_LIST_HEAD(&p->list);
+	p->parent = parent ? parent : &sysctl_table_root.default_set;
+	p->is_seen = is_seen;
 }
 
 #else /* !CONFIG_SYSCTL */
@@ -1848,6 +1975,16 @@ void unregister_sysctl_table(struct ctl_table_header * table)
 {
 }
 
+void setup_sysctl_set(struct ctl_table_set *p,
+	struct ctl_table_set *parent,
+	int (*is_seen)(struct ctl_table_set *))
+{
+}
+
+void sysctl_head_put(struct ctl_table_header *head)
+{
+}
+
 #endif /* CONFIG_SYSCTL */
 
 /*
diff --git a/kernel/sysctl_check.c b/kernel/sysctl_check.c
index c09350d564f2..c35da23ab8fb 100644
--- a/kernel/sysctl_check.c
+++ b/kernel/sysctl_check.c
@@ -1532,6 +1532,8 @@ int sysctl_check_table(struct nsproxy *namespaces, struct ctl_table *table)
 			sysctl_check_leaf(namespaces, table, &fail);
 		}
 		sysctl_check_bin_path(table, &fail);
+		if (table->mode > 0777)
+			set_fail(&fail, table, "bogus .mode");
 		if (fail) {
 			set_fail(&fail, table, NULL);
 			error = -EINVAL;
diff --git a/kernel/taskstats.c b/kernel/taskstats.c
index 06b17547f4e7..bd6be76303cf 100644
--- a/kernel/taskstats.c
+++ b/kernel/taskstats.c
@@ -35,7 +35,7 @@
  */
 #define TASKSTATS_CPUMASK_MAXLEN	(100+6*NR_CPUS)
 
-static DEFINE_PER_CPU(__u32, taskstats_seqnum) = { 0 };
+static DEFINE_PER_CPU(__u32, taskstats_seqnum);
 static int family_registered;
 struct kmem_cache *taskstats_cache;
 
diff --git a/kernel/time/tick-common.c b/kernel/time/tick-common.c
index bf43284d6855..80c4336f4188 100644
--- a/kernel/time/tick-common.c
+++ b/kernel/time/tick-common.c
@@ -196,12 +196,10 @@ static int tick_check_new_device(struct clock_event_device *newdev)
 	struct tick_device *td;
 	int cpu, ret = NOTIFY_OK;
 	unsigned long flags;
-	cpumask_of_cpu_ptr_declare(cpumask);
 
 	spin_lock_irqsave(&tick_device_lock, flags);
 
 	cpu = smp_processor_id();
-	cpumask_of_cpu_ptr_next(cpumask, cpu);
 	if (!cpu_isset(cpu, newdev->cpumask))
 		goto out_bc;
 
@@ -209,7 +207,7 @@ static int tick_check_new_device(struct clock_event_device *newdev)
 	curdev = td->evtdev;
 
 	/* cpu local device ? */
-	if (!cpus_equal(newdev->cpumask, *cpumask)) {
+	if (!cpus_equal(newdev->cpumask, cpumask_of_cpu(cpu))) {
 
 		/*
 		 * If the cpu affinity of the device interrupt can not
@@ -222,7 +220,7 @@ static int tick_check_new_device(struct clock_event_device *newdev)
 		 * If we have a cpu local device already, do not replace it
 		 * by a non cpu local device
 		 */
-		if (curdev && cpus_equal(curdev->cpumask, *cpumask))
+		if (curdev && cpus_equal(curdev->cpumask, cpumask_of_cpu(cpu)))
 			goto out_bc;
 	}
 
@@ -254,7 +252,7 @@ static int tick_check_new_device(struct clock_event_device *newdev)
 		curdev = NULL;
 	}
 	clockevents_exchange_device(curdev, newdev);
-	tick_setup_device(td, newdev, cpu, cpumask);
+	tick_setup_device(td, newdev, cpu, &cpumask_of_cpu(cpu));
 	if (newdev->features & CLOCK_EVT_FEAT_ONESHOT)
 		tick_oneshot_notify();
 
diff --git a/kernel/time/tick-sched.c b/kernel/time/tick-sched.c
index 825b4c00fe44..7a46bde78c66 100644
--- a/kernel/time/tick-sched.c
+++ b/kernel/time/tick-sched.c
@@ -289,7 +289,6 @@ void tick_nohz_stop_sched_tick(int inidle)
 			ts->tick_stopped = 1;
 			ts->idle_jiffies = last_jiffies;
 			rcu_enter_nohz();
-			sched_clock_tick_stop(cpu);
 		}
 
 		/*
@@ -392,7 +391,6 @@ void tick_nohz_restart_sched_tick(void)
 	select_nohz_load_balancer(0);
 	now = ktime_get();
 	tick_do_update_jiffies64(now);
-	sched_clock_tick_start(cpu);
 	cpu_clear(cpu, nohz_cpu_mask);
 
 	/*
@@ -645,17 +643,21 @@ void tick_setup_sched_timer(void)
 		ts->nohz_mode = NOHZ_MODE_HIGHRES;
 #endif
 }
+#endif /* HIGH_RES_TIMERS */
 
+#if defined CONFIG_NO_HZ || defined CONFIG_HIGH_RES_TIMERS
 void tick_cancel_sched_timer(int cpu)
 {
 	struct tick_sched *ts = &per_cpu(tick_cpu_sched, cpu);
 
+# ifdef CONFIG_HIGH_RES_TIMERS
 	if (ts->sched_timer.base)
 		hrtimer_cancel(&ts->sched_timer);
+# endif
 
 	ts->nohz_mode = NOHZ_MODE_INACTIVE;
 }
-#endif /* HIGH_RES_TIMERS */
+#endif
 
 /**
  * Async notification about clocksource changes
diff --git a/kernel/trace/ftrace.c b/kernel/trace/ftrace.c
index 4231a3dc224a..f6e3af31b403 100644
--- a/kernel/trace/ftrace.c
+++ b/kernel/trace/ftrace.c
@@ -587,7 +587,7 @@ static int __ftrace_modify_code(void *data)
 
 static void ftrace_run_update_code(int command)
 {
-	stop_machine_run(__ftrace_modify_code, &command, NR_CPUS);
+	stop_machine(__ftrace_modify_code, &command, NULL);
 }
 
 void ftrace_disable_daemon(void)
@@ -787,7 +787,7 @@ static int ftrace_update_code(void)
 	    !ftrace_enabled || !ftraced_trigger)
 		return 0;
 
-	stop_machine_run(__ftrace_update_code, NULL, NR_CPUS);
+	stop_machine(__ftrace_update_code, NULL, NULL);
 
 	return 1;
 }
@@ -1564,7 +1564,7 @@ static int __init ftrace_dynamic_init(void)
 
 	addr = (unsigned long)ftrace_record_ip;
 
-	stop_machine_run(ftrace_dyn_arch_init, &addr, NR_CPUS);
+	stop_machine(ftrace_dyn_arch_init, &addr, NULL);
 
 	/* ftrace_dyn_arch_init places the return code in addr */
 	if (addr) {
diff --git a/kernel/trace/trace.c b/kernel/trace/trace.c
index 868e121c8e38..8f3fb3db61c3 100644
--- a/kernel/trace/trace.c
+++ b/kernel/trace/trace.c
@@ -1183,7 +1183,6 @@ static void *find_next_entry_inc(struct trace_iterator *iter)
 static void *s_next(struct seq_file *m, void *v, loff_t *pos)
 {
 	struct trace_iterator *iter = m->private;
-	void *last_ent = iter->ent;
 	int i = (int)*pos;
 	void *ent;
 
@@ -1203,9 +1202,6 @@ static void *s_next(struct seq_file *m, void *v, loff_t *pos)
 
 	iter->pos = *pos;
 
-	if (last_ent && !ent)
-		seq_puts(m, "\n\nvim:ft=help\n");
-
 	return ent;
 }
 
diff --git a/kernel/trace/trace_irqsoff.c b/kernel/trace/trace_irqsoff.c
index 421d6fe3650e..ece6cfb649fa 100644
--- a/kernel/trace/trace_irqsoff.c
+++ b/kernel/trace/trace_irqsoff.c
@@ -253,12 +253,14 @@ void start_critical_timings(void)
 	if (preempt_trace() || irq_trace())
 		start_critical_timing(CALLER_ADDR0, CALLER_ADDR1);
 }
+EXPORT_SYMBOL_GPL(start_critical_timings);
 
 void stop_critical_timings(void)
 {
 	if (preempt_trace() || irq_trace())
 		stop_critical_timing(CALLER_ADDR0, CALLER_ADDR1);
 }
+EXPORT_SYMBOL_GPL(stop_critical_timings);
 
 #ifdef CONFIG_IRQSOFF_TRACER
 #ifdef CONFIG_PROVE_LOCKING
@@ -337,12 +339,14 @@ EXPORT_SYMBOL(trace_hardirqs_off_caller);
 #ifdef CONFIG_PREEMPT_TRACER
 void trace_preempt_on(unsigned long a0, unsigned long a1)
 {
-	stop_critical_timing(a0, a1);
+	if (preempt_trace())
+		stop_critical_timing(a0, a1);
 }
 
 void trace_preempt_off(unsigned long a0, unsigned long a1)
 {
-	start_critical_timing(a0, a1);
+	if (preempt_trace())
+		start_critical_timing(a0, a1);
 }
 #endif /* CONFIG_PREEMPT_TRACER */
 
diff --git a/kernel/trace/trace_sched_wakeup.c b/kernel/trace/trace_sched_wakeup.c
index 3c8d61df4474..e303ccb62cdf 100644
--- a/kernel/trace/trace_sched_wakeup.c
+++ b/kernel/trace/trace_sched_wakeup.c
@@ -26,7 +26,8 @@ static struct task_struct	*wakeup_task;
 static int			wakeup_cpu;
 static unsigned			wakeup_prio = -1;
 
-static DEFINE_SPINLOCK(wakeup_lock);
+static raw_spinlock_t wakeup_lock =
+	(raw_spinlock_t)__RAW_SPIN_LOCK_UNLOCKED;
 
 static void __wakeup_reset(struct trace_array *tr);
 
@@ -56,7 +57,8 @@ wakeup_tracer_call(unsigned long ip, unsigned long parent_ip)
 	if (unlikely(disabled != 1))
 		goto out;
 
-	spin_lock_irqsave(&wakeup_lock, flags);
+	local_irq_save(flags);
+	__raw_spin_lock(&wakeup_lock);
 
 	if (unlikely(!wakeup_task))
 		goto unlock;
@@ -71,7 +73,8 @@ wakeup_tracer_call(unsigned long ip, unsigned long parent_ip)
 	trace_function(tr, data, ip, parent_ip, flags);
 
  unlock:
-	spin_unlock_irqrestore(&wakeup_lock, flags);
+	__raw_spin_unlock(&wakeup_lock);
+	local_irq_restore(flags);
 
  out:
 	atomic_dec(&data->disabled);
@@ -145,7 +148,8 @@ wakeup_sched_switch(void *private, void *rq, struct task_struct *prev,
 	if (likely(disabled != 1))
 		goto out;
 
-	spin_lock_irqsave(&wakeup_lock, flags);
+	local_irq_save(flags);
+	__raw_spin_lock(&wakeup_lock);
 
 	/* We could race with grabbing wakeup_lock */
 	if (unlikely(!tracer_enabled || next != wakeup_task))
@@ -174,7 +178,8 @@ wakeup_sched_switch(void *private, void *rq, struct task_struct *prev,
 
 out_unlock:
 	__wakeup_reset(tr);
-	spin_unlock_irqrestore(&wakeup_lock, flags);
+	__raw_spin_unlock(&wakeup_lock);
+	local_irq_restore(flags);
 out:
 	atomic_dec(&tr->data[cpu]->disabled);
 }
@@ -209,8 +214,6 @@ static void __wakeup_reset(struct trace_array *tr)
 	struct trace_array_cpu *data;
 	int cpu;
 
-	assert_spin_locked(&wakeup_lock);
-
 	for_each_possible_cpu(cpu) {
 		data = tr->data[cpu];
 		tracing_reset(data);
@@ -229,9 +232,11 @@ static void wakeup_reset(struct trace_array *tr)
 {
 	unsigned long flags;
 
-	spin_lock_irqsave(&wakeup_lock, flags);
+	local_irq_save(flags);
+	__raw_spin_lock(&wakeup_lock);
 	__wakeup_reset(tr);
-	spin_unlock_irqrestore(&wakeup_lock, flags);
+	__raw_spin_unlock(&wakeup_lock);
+	local_irq_restore(flags);
 }
 
 static void
@@ -252,7 +257,7 @@ wakeup_check_start(struct trace_array *tr, struct task_struct *p,
 		goto out;
 
 	/* interrupts should be off from try_to_wake_up */
-	spin_lock(&wakeup_lock);
+	__raw_spin_lock(&wakeup_lock);
 
 	/* check for races. */
 	if (!tracer_enabled || p->prio >= wakeup_prio)
@@ -274,7 +279,7 @@ wakeup_check_start(struct trace_array *tr, struct task_struct *p,
 		       CALLER_ADDR1, CALLER_ADDR2, flags);
 
 out_locked:
-	spin_unlock(&wakeup_lock);
+	__raw_spin_unlock(&wakeup_lock);
 out:
 	atomic_dec(&tr->data[cpu]->disabled);
 }
diff --git a/kernel/trace/trace_sysprof.c b/kernel/trace/trace_sysprof.c
index 63528086337c..bb948e52ce20 100644
--- a/kernel/trace/trace_sysprof.c
+++ b/kernel/trace/trace_sysprof.c
@@ -161,7 +161,7 @@ static void timer_notify(struct pt_regs *regs, int cpu)
 		__trace_special(tr, data, 2, regs->ip, 0);
 
 		while (i < sample_max_depth) {
-			frame.next_fp = 0;
+			frame.next_fp = NULL;
 			frame.return_address = 0;
 			if (!copy_stack_frame(fp, &frame))
 				break;
@@ -213,9 +213,7 @@ static void start_stack_timers(void)
 	int cpu;
 
 	for_each_online_cpu(cpu) {
-		cpumask_of_cpu_ptr(new_mask, cpu);
-
-		set_cpus_allowed_ptr(current, new_mask);
+		set_cpus_allowed_ptr(current, &cpumask_of_cpu(cpu));
 		start_stack_timer(cpu);
 	}
 	set_cpus_allowed_ptr(current, &saved_mask);
diff --git a/kernel/tsacct.c b/kernel/tsacct.c
index 4ab1b584961b..8ebcd8532dfb 100644
--- a/kernel/tsacct.c
+++ b/kernel/tsacct.c
@@ -28,14 +28,14 @@
 void bacct_add_tsk(struct taskstats *stats, struct task_struct *tsk)
 {
 	struct timespec uptime, ts;
-	s64 ac_etime;
+	u64 ac_etime;
 
 	BUILD_BUG_ON(TS_COMM_LEN < TASK_COMM_LEN);
 
 	/* calculate task elapsed time in timespec */
 	do_posix_clock_monotonic_gettime(&uptime);
 	ts = timespec_sub(uptime, tsk->start_time);
-	/* rebase elapsed time to usec */
+	/* rebase elapsed time to usec (should never be negative) */
 	ac_etime = timespec_to_ns(&ts);
 	do_div(ac_etime, NSEC_PER_USEC);
 	stats->ac_etime = ac_etime;
@@ -84,9 +84,9 @@ void xacct_add_tsk(struct taskstats *stats, struct task_struct *p)
 {
 	struct mm_struct *mm;
 
-	/* convert pages-jiffies to Mbyte-usec */
-	stats->coremem = jiffies_to_usecs(p->acct_rss_mem1) * PAGE_SIZE / MB;
-	stats->virtmem = jiffies_to_usecs(p->acct_vm_mem1) * PAGE_SIZE / MB;
+	/* convert pages-usec to Mbyte-usec */
+	stats->coremem = p->acct_rss_mem1 * PAGE_SIZE / MB;
+	stats->virtmem = p->acct_vm_mem1 * PAGE_SIZE / MB;
 	mm = get_task_mm(p);
 	if (mm) {
 		/* adjust to KB unit */
@@ -94,10 +94,10 @@ void xacct_add_tsk(struct taskstats *stats, struct task_struct *p)
 		stats->hiwater_vm    = mm->hiwater_vm * PAGE_SIZE / KB;
 		mmput(mm);
 	}
-	stats->read_char	= p->rchar;
-	stats->write_char	= p->wchar;
-	stats->read_syscalls	= p->syscr;
-	stats->write_syscalls	= p->syscw;
+	stats->read_char	= p->ioac.rchar;
+	stats->write_char	= p->ioac.wchar;
+	stats->read_syscalls	= p->ioac.syscr;
+	stats->write_syscalls	= p->ioac.syscw;
 #ifdef CONFIG_TASK_IO_ACCOUNTING
 	stats->read_bytes	= p->ioac.read_bytes;
 	stats->write_bytes	= p->ioac.write_bytes;
@@ -118,12 +118,19 @@ void xacct_add_tsk(struct taskstats *stats, struct task_struct *p)
 void acct_update_integrals(struct task_struct *tsk)
 {
 	if (likely(tsk->mm)) {
-		long delta = cputime_to_jiffies(
-			cputime_sub(tsk->stime, tsk->acct_stimexpd));
+		cputime_t time, dtime;
+		struct timeval value;
+		u64 delta;
+
+		time = tsk->stime + tsk->utime;
+		dtime = cputime_sub(time, tsk->acct_timexpd);
+		jiffies_to_timeval(cputime_to_jiffies(dtime), &value);
+		delta = value.tv_sec;
+		delta = delta * USEC_PER_SEC + value.tv_usec;
 
 		if (delta == 0)
 			return;
-		tsk->acct_stimexpd = tsk->stime;
+		tsk->acct_timexpd = time;
 		tsk->acct_rss_mem1 += delta * get_mm_rss(tsk->mm);
 		tsk->acct_vm_mem1 += delta * tsk->mm->total_vm;
 	}
@@ -135,7 +142,7 @@ void acct_update_integrals(struct task_struct *tsk)
  */
 void acct_clear_integrals(struct task_struct *tsk)
 {
-	tsk->acct_stimexpd = 0;
+	tsk->acct_timexpd = 0;
 	tsk->acct_rss_mem1 = 0;
 	tsk->acct_vm_mem1 = 0;
 }
diff --git a/kernel/user_namespace.c b/kernel/user_namespace.c
index a9ab0596de44..532858fa5b88 100644
--- a/kernel/user_namespace.c
+++ b/kernel/user_namespace.c
@@ -6,7 +6,6 @@
  */
 
 #include <linux/module.h>
-#include <linux/version.h>
 #include <linux/nsproxy.h>
 #include <linux/slab.h>
 #include <linux/user_namespace.h>
diff --git a/kernel/utsname.c b/kernel/utsname.c
index 64d398f12444..815237a55af8 100644
--- a/kernel/utsname.c
+++ b/kernel/utsname.c
@@ -12,7 +12,6 @@
 #include <linux/module.h>
 #include <linux/uts.h>
 #include <linux/utsname.h>
-#include <linux/version.h>
 #include <linux/err.h>
 #include <linux/slab.h>
 
diff --git a/kernel/utsname_sysctl.c b/kernel/utsname_sysctl.c
index fe3a56c2256d..4ab9659d269e 100644
--- a/kernel/utsname_sysctl.c
+++ b/kernel/utsname_sysctl.c
@@ -12,7 +12,6 @@
 #include <linux/module.h>
 #include <linux/uts.h>
 #include <linux/utsname.h>
-#include <linux/version.h>
 #include <linux/sysctl.h>
 
 static void *get_uts(ctl_table *table, int write)
diff --git a/kernel/workqueue.c b/kernel/workqueue.c
index 6fd158b21026..4048e92aa04f 100644
--- a/kernel/workqueue.c
+++ b/kernel/workqueue.c
@@ -125,7 +125,7 @@ struct cpu_workqueue_struct *get_wq_data(struct work_struct *work)
 }
 
 static void insert_work(struct cpu_workqueue_struct *cwq,
-				struct work_struct *work, int tail)
+			struct work_struct *work, struct list_head *head)
 {
 	set_wq_data(work, cwq);
 	/*
@@ -133,10 +133,7 @@ static void insert_work(struct cpu_workqueue_struct *cwq,
 	 * result of list_add() below, see try_to_grab_pending().
 	 */
 	smp_wmb();
-	if (tail)
-		list_add_tail(&work->entry, &cwq->worklist);
-	else
-		list_add(&work->entry, &cwq->worklist);
+	list_add_tail(&work->entry, head);
 	wake_up(&cwq->more_work);
 }
 
@@ -146,7 +143,7 @@ static void __queue_work(struct cpu_workqueue_struct *cwq,
 	unsigned long flags;
 
 	spin_lock_irqsave(&cwq->lock, flags);
-	insert_work(cwq, work, 1);
+	insert_work(cwq, work, &cwq->worklist);
 	spin_unlock_irqrestore(&cwq->lock, flags);
 }
 
@@ -162,14 +159,11 @@ static void __queue_work(struct cpu_workqueue_struct *cwq,
  */
 int queue_work(struct workqueue_struct *wq, struct work_struct *work)
 {
-	int ret = 0;
+	int ret;
+
+	ret = queue_work_on(get_cpu(), wq, work);
+	put_cpu();
 
-	if (!test_and_set_bit(WORK_STRUCT_PENDING, work_data_bits(work))) {
-		BUG_ON(!list_empty(&work->entry));
-		__queue_work(wq_per_cpu(wq, get_cpu()), work);
-		put_cpu();
-		ret = 1;
-	}
 	return ret;
 }
 EXPORT_SYMBOL_GPL(queue_work);
@@ -296,11 +290,11 @@ static void run_workqueue(struct cpu_workqueue_struct *cwq)
 
 		BUG_ON(get_wq_data(work) != cwq);
 		work_clear_pending(work);
-		lock_acquire(&cwq->wq->lockdep_map, 0, 0, 0, 2, _THIS_IP_);
-		lock_acquire(&lockdep_map, 0, 0, 0, 2, _THIS_IP_);
+		lock_map_acquire(&cwq->wq->lockdep_map);
+		lock_map_acquire(&lockdep_map);
 		f(work);
-		lock_release(&lockdep_map, 1, _THIS_IP_);
-		lock_release(&cwq->wq->lockdep_map, 1, _THIS_IP_);
+		lock_map_release(&lockdep_map);
+		lock_map_release(&cwq->wq->lockdep_map);
 
 		if (unlikely(in_atomic() || lockdep_depth(current) > 0)) {
 			printk(KERN_ERR "BUG: workqueue leaked lock or atomic: "
@@ -361,14 +355,14 @@ static void wq_barrier_func(struct work_struct *work)
 }
 
 static void insert_wq_barrier(struct cpu_workqueue_struct *cwq,
-					struct wq_barrier *barr, int tail)
+			struct wq_barrier *barr, struct list_head *head)
 {
 	INIT_WORK(&barr->work, wq_barrier_func);
 	__set_bit(WORK_STRUCT_PENDING, work_data_bits(&barr->work));
 
 	init_completion(&barr->done);
 
-	insert_work(cwq, &barr->work, tail);
+	insert_work(cwq, &barr->work, head);
 }
 
 static int flush_cpu_workqueue(struct cpu_workqueue_struct *cwq)
@@ -388,7 +382,7 @@ static int flush_cpu_workqueue(struct cpu_workqueue_struct *cwq)
 		active = 0;
 		spin_lock_irq(&cwq->lock);
 		if (!list_empty(&cwq->worklist) || cwq->current_work != NULL) {
-			insert_wq_barrier(cwq, &barr, 1);
+			insert_wq_barrier(cwq, &barr, &cwq->worklist);
 			active = 1;
 		}
 		spin_unlock_irq(&cwq->lock);
@@ -419,13 +413,64 @@ void flush_workqueue(struct workqueue_struct *wq)
 	int cpu;
 
 	might_sleep();
-	lock_acquire(&wq->lockdep_map, 0, 0, 0, 2, _THIS_IP_);
-	lock_release(&wq->lockdep_map, 1, _THIS_IP_);
+	lock_map_acquire(&wq->lockdep_map);
+	lock_map_release(&wq->lockdep_map);
 	for_each_cpu_mask_nr(cpu, *cpu_map)
 		flush_cpu_workqueue(per_cpu_ptr(wq->cpu_wq, cpu));
 }
 EXPORT_SYMBOL_GPL(flush_workqueue);
 
+/**
+ * flush_work - block until a work_struct's callback has terminated
+ * @work: the work which is to be flushed
+ *
+ * Returns false if @work has already terminated.
+ *
+ * It is expected that, prior to calling flush_work(), the caller has
+ * arranged for the work to not be requeued, otherwise it doesn't make
+ * sense to use this function.
+ */
+int flush_work(struct work_struct *work)
+{
+	struct cpu_workqueue_struct *cwq;
+	struct list_head *prev;
+	struct wq_barrier barr;
+
+	might_sleep();
+	cwq = get_wq_data(work);
+	if (!cwq)
+		return 0;
+
+	lock_map_acquire(&cwq->wq->lockdep_map);
+	lock_map_release(&cwq->wq->lockdep_map);
+
+	prev = NULL;
+	spin_lock_irq(&cwq->lock);
+	if (!list_empty(&work->entry)) {
+		/*
+		 * See the comment near try_to_grab_pending()->smp_rmb().
+		 * If it was re-queued under us we are not going to wait.
+		 */
+		smp_rmb();
+		if (unlikely(cwq != get_wq_data(work)))
+			goto out;
+		prev = &work->entry;
+	} else {
+		if (cwq->current_work != work)
+			goto out;
+		prev = &cwq->worklist;
+	}
+	insert_wq_barrier(cwq, &barr, prev->next);
+out:
+	spin_unlock_irq(&cwq->lock);
+	if (!prev)
+		return 0;
+
+	wait_for_completion(&barr.done);
+	return 1;
+}
+EXPORT_SYMBOL_GPL(flush_work);
+
 /*
  * Upon a successful return (>= 0), the caller "owns" WORK_STRUCT_PENDING bit,
  * so this work can't be re-armed in any way.
@@ -473,7 +518,7 @@ static void wait_on_cpu_work(struct cpu_workqueue_struct *cwq,
 
 	spin_lock_irq(&cwq->lock);
 	if (unlikely(cwq->current_work == work)) {
-		insert_wq_barrier(cwq, &barr, 0);
+		insert_wq_barrier(cwq, &barr, cwq->worklist.next);
 		running = 1;
 	}
 	spin_unlock_irq(&cwq->lock);
@@ -491,8 +536,8 @@ static void wait_on_work(struct work_struct *work)
 
 	might_sleep();
 
-	lock_acquire(&work->lockdep_map, 0, 0, 0, 2, _THIS_IP_);
-	lock_release(&work->lockdep_map, 1, _THIS_IP_);
+	lock_map_acquire(&work->lockdep_map);
+	lock_map_release(&work->lockdep_map);
 
 	cwq = get_wq_data(work);
 	if (!cwq)
@@ -644,10 +689,10 @@ int schedule_on_each_cpu(work_func_t func)
 		struct work_struct *work = per_cpu_ptr(works, cpu);
 
 		INIT_WORK(work, func);
-		set_bit(WORK_STRUCT_PENDING, work_data_bits(work));
-		__queue_work(per_cpu_ptr(keventd_wq->cpu_wq, cpu), work);
+		schedule_work_on(cpu, work);
 	}
-	flush_workqueue(keventd_wq);
+	for_each_online_cpu(cpu)
+		flush_work(per_cpu_ptr(works, cpu));
 	put_online_cpus();
 	free_percpu(works);
 	return 0;
@@ -784,11 +829,22 @@ struct workqueue_struct *__create_workqueue_key(const char *name,
 		err = create_workqueue_thread(cwq, singlethread_cpu);
 		start_workqueue_thread(cwq, -1);
 	} else {
-		get_online_cpus();
+		cpu_maps_update_begin();
+		/*
+		 * We must place this wq on list even if the code below fails.
+		 * cpu_down(cpu) can remove cpu from cpu_populated_map before
+		 * destroy_workqueue() takes the lock, in that case we leak
+		 * cwq[cpu]->thread.
+		 */
 		spin_lock(&workqueue_lock);
 		list_add(&wq->list, &workqueues);
 		spin_unlock(&workqueue_lock);
-
+		/*
+		 * We must initialize cwqs for each possible cpu even if we
+		 * are going to call destroy_workqueue() finally. Otherwise
+		 * cpu_up() can hit the uninitialized cwq once we drop the
+		 * lock.
+		 */
 		for_each_possible_cpu(cpu) {
 			cwq = init_cpu_workqueue(wq, cpu);
 			if (err || !cpu_online(cpu))
@@ -796,7 +852,7 @@ struct workqueue_struct *__create_workqueue_key(const char *name,
 			err = create_workqueue_thread(cwq, cpu);
 			start_workqueue_thread(cwq, cpu);
 		}
-		put_online_cpus();
+		cpu_maps_update_done();
 	}
 
 	if (err) {
@@ -810,18 +866,18 @@ EXPORT_SYMBOL_GPL(__create_workqueue_key);
 static void cleanup_workqueue_thread(struct cpu_workqueue_struct *cwq)
 {
 	/*
-	 * Our caller is either destroy_workqueue() or CPU_DEAD,
-	 * get_online_cpus() protects cwq->thread.
+	 * Our caller is either destroy_workqueue() or CPU_POST_DEAD,
+	 * cpu_add_remove_lock protects cwq->thread.
 	 */
 	if (cwq->thread == NULL)
 		return;
 
-	lock_acquire(&cwq->wq->lockdep_map, 0, 0, 0, 2, _THIS_IP_);
-	lock_release(&cwq->wq->lockdep_map, 1, _THIS_IP_);
+	lock_map_acquire(&cwq->wq->lockdep_map);
+	lock_map_release(&cwq->wq->lockdep_map);
 
 	flush_cpu_workqueue(cwq);
 	/*
-	 * If the caller is CPU_DEAD and cwq->worklist was not empty,
+	 * If the caller is CPU_POST_DEAD and cwq->worklist was not empty,
 	 * a concurrent flush_workqueue() can insert a barrier after us.
 	 * However, in that case run_workqueue() won't return and check
 	 * kthread_should_stop() until it flushes all work_struct's.
@@ -845,14 +901,14 @@ void destroy_workqueue(struct workqueue_struct *wq)
 	const cpumask_t *cpu_map = wq_cpu_map(wq);
 	int cpu;
 
-	get_online_cpus();
+	cpu_maps_update_begin();
 	spin_lock(&workqueue_lock);
 	list_del(&wq->list);
 	spin_unlock(&workqueue_lock);
 
 	for_each_cpu_mask_nr(cpu, *cpu_map)
 		cleanup_workqueue_thread(per_cpu_ptr(wq->cpu_wq, cpu));
-	put_online_cpus();
+ 	cpu_maps_update_done();
 
 	free_percpu(wq->cpu_wq);
 	kfree(wq);
@@ -866,6 +922,7 @@ static int __devinit workqueue_cpu_callback(struct notifier_block *nfb,
 	unsigned int cpu = (unsigned long)hcpu;
 	struct cpu_workqueue_struct *cwq;
 	struct workqueue_struct *wq;
+	int ret = NOTIFY_OK;
 
 	action &= ~CPU_TASKS_FROZEN;
 
@@ -873,7 +930,7 @@ static int __devinit workqueue_cpu_callback(struct notifier_block *nfb,
 	case CPU_UP_PREPARE:
 		cpu_set(cpu, cpu_populated_map);
 	}
-
+undo:
 	list_for_each_entry(wq, &workqueues, list) {
 		cwq = per_cpu_ptr(wq->cpu_wq, cpu);
 
@@ -883,7 +940,9 @@ static int __devinit workqueue_cpu_callback(struct notifier_block *nfb,
 				break;
 			printk(KERN_ERR "workqueue [%s] for %i failed\n",
 				wq->name, cpu);
-			return NOTIFY_BAD;
+			action = CPU_UP_CANCELED;
+			ret = NOTIFY_BAD;
+			goto undo;
 
 		case CPU_ONLINE:
 			start_workqueue_thread(cwq, cpu);
@@ -891,7 +950,7 @@ static int __devinit workqueue_cpu_callback(struct notifier_block *nfb,
 
 		case CPU_UP_CANCELED:
 			start_workqueue_thread(cwq, -1);
-		case CPU_DEAD:
+		case CPU_POST_DEAD:
 			cleanup_workqueue_thread(cwq);
 			break;
 		}
@@ -899,11 +958,11 @@ static int __devinit workqueue_cpu_callback(struct notifier_block *nfb,
 
 	switch (action) {
 	case CPU_UP_CANCELED:
-	case CPU_DEAD:
+	case CPU_POST_DEAD:
 		cpu_clear(cpu, cpu_populated_map);
 	}
 
-	return NOTIFY_OK;
+	return ret;
 }
 
 void __init init_workqueues(void)
diff --git a/lib/Kconfig.debug b/lib/Kconfig.debug
index e1d4764435ed..0b504814e378 100644
--- a/lib/Kconfig.debug
+++ b/lib/Kconfig.debug
@@ -394,7 +394,7 @@ config LOCKDEP
 	bool
 	depends on DEBUG_KERNEL && TRACE_IRQFLAGS_SUPPORT && STACKTRACE_SUPPORT && LOCKDEP_SUPPORT
 	select STACKTRACE
-	select FRAME_POINTER if !X86 && !MIPS
+	select FRAME_POINTER if !X86 && !MIPS && !PPC
 	select KALLSYMS
 	select KALLSYMS_ALL
 
@@ -676,13 +676,13 @@ config FAULT_INJECTION_STACKTRACE_FILTER
 	depends on FAULT_INJECTION_DEBUG_FS && STACKTRACE_SUPPORT
 	depends on !X86_64
 	select STACKTRACE
-	select FRAME_POINTER
+	select FRAME_POINTER if !PPC
 	help
 	  Provide stacktrace filter for fault-injection capabilities
 
 config LATENCYTOP
 	bool "Latency measuring infrastructure"
-	select FRAME_POINTER if !MIPS
+	select FRAME_POINTER if !MIPS && !PPC
 	select KALLSYMS
 	select KALLSYMS_ALL
 	select STACKTRACE
@@ -693,6 +693,14 @@ config LATENCYTOP
 	  Enable this option if you want to use the LatencyTOP tool
 	  to find out which userspace is blocking on what kernel operations.
 
+config SYSCTL_SYSCALL_CHECK
+	bool "Sysctl checks"
+	depends on SYSCTL_SYSCALL
+	---help---
+	  sys_sysctl uses binary paths that have been found challenging
+	  to properly maintain and use. This enables checks that help
+	  you to keep things correct.
+
 source kernel/trace/Kconfig
 
 config PROVIDE_OHCI1394_DMA_INIT
@@ -735,6 +743,15 @@ config FIREWIRE_OHCI_REMOTE_DMA
 
 	  If unsure, say N.
 
+menuconfig BUILD_DOCSRC
+	bool "Build targets in Documentation/ tree"
+	depends on HEADERS_CHECK
+	help
+	  This option attempts to build objects from the source files in the
+	  kernel Documentation/ tree.
+
+	  Say N if you are unsure.
+
 source "samples/Kconfig"
 
 source "lib/Kconfig.kgdb"
diff --git a/lib/Kconfig.kgdb b/lib/Kconfig.kgdb
index 2cfd2721f7ed..9b5d1d7f2ef7 100644
--- a/lib/Kconfig.kgdb
+++ b/lib/Kconfig.kgdb
@@ -4,14 +4,17 @@ config HAVE_ARCH_KGDB
 
 menuconfig KGDB
 	bool "KGDB: kernel debugging with remote gdb"
-	select FRAME_POINTER
 	depends on HAVE_ARCH_KGDB
 	depends on DEBUG_KERNEL && EXPERIMENTAL
 	help
 	  If you say Y here, it will be possible to remotely debug the
-	  kernel using gdb.  Documentation of kernel debugger is available
-	  at http://kgdb.sourceforge.net as well as in DocBook form
-	  in Documentation/DocBook/.  If unsure, say N.
+	  kernel using gdb.  It is recommended but not required, that
+	  you also turn on the kernel config option
+	  CONFIG_FRAME_POINTER to aid in producing more reliable stack
+	  backtraces in the external debugger.  Documentation of
+	  kernel debugger is available at http://kgdb.sourceforge.net
+	  as well as in DocBook form in Documentation/DocBook/.  If
+	  unsure, say N.
 
 if KGDB
 
diff --git a/lib/Makefile b/lib/Makefile
index 9085ad6fa53d..3b1f94bbe9de 100644
--- a/lib/Makefile
+++ b/lib/Makefile
@@ -11,7 +11,7 @@ lib-y := ctype.o string.o vsprintf.o cmdline.o \
 	 rbtree.o radix-tree.o dump_stack.o \
 	 idr.o int_sqrt.o extable.o prio_tree.o \
 	 sha1.o irq_regs.o reciprocal_div.o argv_split.o \
-	 proportions.o prio_heap.o ratelimit.o
+	 proportions.o prio_heap.o ratelimit.o show_mem.o
 
 lib-$(CONFIG_MMU) += ioremap.o
 lib-$(CONFIG_SMP) += cpumask.o
@@ -78,6 +78,8 @@ lib-$(CONFIG_GENERIC_BUG) += bug.o
 
 obj-$(CONFIG_HAVE_LMB) += lmb.o
 
+obj-$(CONFIG_HAVE_ARCH_TRACEHOOK) += syscall.o
+
 hostprogs-y	:= gen_crc32table
 clean-files	:= crc32table.h
 
diff --git a/lib/bitmap.c b/lib/bitmap.c
index 482df94ea21e..06fb57c86de0 100644
--- a/lib/bitmap.c
+++ b/lib/bitmap.c
@@ -316,6 +316,17 @@ int bitmap_scnprintf(char *buf, unsigned int buflen,
 EXPORT_SYMBOL(bitmap_scnprintf);
 
 /**
+ * bitmap_scnprintf_len - return buffer length needed to convert
+ * bitmap to an ASCII hex string
+ * @nr_bits: number of bits to be converted
+ */
+int bitmap_scnprintf_len(unsigned int nr_bits)
+{
+	unsigned int nr_nibbles = ALIGN(nr_bits, 4) / 4;
+	return nr_nibbles + ALIGN(nr_nibbles, CHUNKSZ / 4) / (CHUNKSZ / 4) - 1;
+}
+
+/**
  * __bitmap_parse - convert an ASCII hex string into a bitmap.
  * @buf: pointer to buffer containing string.
  * @buflen: buffer size in bytes.  If string is smaller than this
diff --git a/lib/cmdline.c b/lib/cmdline.c
index f596c08d213a..5ba8a942a478 100644
--- a/lib/cmdline.c
+++ b/lib/cmdline.c
@@ -116,7 +116,7 @@ char *get_options(const char *str, int nints, int *ints)
 /**
  *	memparse - parse a string with mem suffixes into a number
  *	@ptr: Where parse begins
- *	@retptr: (output) Pointer to next char after parse completes
+ *	@retptr: (output) Optional pointer to next char after parse completes
  *
  *	Parses a string into a number.  The number stored at @ptr is
  *	potentially suffixed with %K (for kilobytes, or 1024 bytes),
@@ -126,11 +126,13 @@ char *get_options(const char *str, int nints, int *ints)
  *	megabyte, or one gigabyte, respectively.
  */
 
-unsigned long long memparse (char *ptr, char **retptr)
+unsigned long long memparse(char *ptr, char **retptr)
 {
-	unsigned long long ret = simple_strtoull (ptr, retptr, 0);
+	char *endptr;	/* local pointer to end of parsed string */
 
-	switch (**retptr) {
+	unsigned long long ret = simple_strtoull(ptr, &endptr, 0);
+
+	switch (*endptr) {
 	case 'G':
 	case 'g':
 		ret <<= 10;
@@ -140,10 +142,14 @@ unsigned long long memparse (char *ptr, char **retptr)
 	case 'K':
 	case 'k':
 		ret <<= 10;
-		(*retptr)++;
+		endptr++;
 	default:
 		break;
 	}
+
+	if (retptr)
+		*retptr = endptr;
+
 	return ret;
 }
 
diff --git a/lib/debug_locks.c b/lib/debug_locks.c
index 0ef01d14727c..0218b4693dd8 100644
--- a/lib/debug_locks.c
+++ b/lib/debug_locks.c
@@ -8,6 +8,7 @@
  *
  *  Copyright (C) 2006 Red Hat, Inc., Ingo Molnar <mingo@redhat.com>
  */
+#include <linux/kernel.h>
 #include <linux/rwsem.h>
 #include <linux/mutex.h>
 #include <linux/module.h>
@@ -37,6 +38,7 @@ int debug_locks_off(void)
 {
 	if (xchg(&debug_locks, 0)) {
 		if (!debug_locks_silent) {
+			oops_in_progress = 1;
 			console_verbose();
 			return 1;
 		}
diff --git a/lib/debugobjects.c b/lib/debugobjects.c
index f86196390cfd..45a6bde762d1 100644
--- a/lib/debugobjects.c
+++ b/lib/debugobjects.c
@@ -205,9 +205,8 @@ static void debug_print_object(struct debug_obj *obj, char *msg)
 
 	if (limit < 5 && obj->descr != descr_test) {
 		limit++;
-		printk(KERN_ERR "ODEBUG: %s %s object type: %s\n", msg,
+		WARN(1, KERN_ERR "ODEBUG: %s %s object type: %s\n", msg,
 		       obj_states[obj->state], obj->descr->name);
-		WARN_ON(1);
 	}
 	debug_objects_warnings++;
 }
@@ -733,26 +732,22 @@ check_results(void *addr, enum debug_obj_state state, int fixups, int warnings)
 
 	obj = lookup_object(addr, db);
 	if (!obj && state != ODEBUG_STATE_NONE) {
-		printk(KERN_ERR "ODEBUG: selftest object not found\n");
-		WARN_ON(1);
+		WARN(1, KERN_ERR "ODEBUG: selftest object not found\n");
 		goto out;
 	}
 	if (obj && obj->state != state) {
-		printk(KERN_ERR "ODEBUG: selftest wrong state: %d != %d\n",
+		WARN(1, KERN_ERR "ODEBUG: selftest wrong state: %d != %d\n",
 		       obj->state, state);
-		WARN_ON(1);
 		goto out;
 	}
 	if (fixups != debug_objects_fixups) {
-		printk(KERN_ERR "ODEBUG: selftest fixups failed %d != %d\n",
+		WARN(1, KERN_ERR "ODEBUG: selftest fixups failed %d != %d\n",
 		       fixups, debug_objects_fixups);
-		WARN_ON(1);
 		goto out;
 	}
 	if (warnings != debug_objects_warnings) {
-		printk(KERN_ERR "ODEBUG: selftest warnings failed %d != %d\n",
+		WARN(1, KERN_ERR "ODEBUG: selftest warnings failed %d != %d\n",
 		       warnings, debug_objects_warnings);
-		WARN_ON(1);
 		goto out;
 	}
 	res = 0;
diff --git a/lib/idr.c b/lib/idr.c
index 7a02e173f027..e728c7fccc4d 100644
--- a/lib/idr.c
+++ b/lib/idr.c
@@ -6,6 +6,8 @@
  * Modified by George Anzinger to reuse immediately and to use
  * find bit instructions.  Also removed _irq on spinlocks.
  *
+ * Modified by Nadia Derbey to make it RCU safe.
+ *
  * Small id to pointer translation service.
  *
  * It uses a radix tree like structure as a sparse array indexed
@@ -35,7 +37,7 @@
 
 static struct kmem_cache *idr_layer_cache;
 
-static struct idr_layer *alloc_layer(struct idr *idp)
+static struct idr_layer *get_from_free_list(struct idr *idp)
 {
 	struct idr_layer *p;
 	unsigned long flags;
@@ -50,15 +52,28 @@ static struct idr_layer *alloc_layer(struct idr *idp)
 	return(p);
 }
 
+static void idr_layer_rcu_free(struct rcu_head *head)
+{
+	struct idr_layer *layer;
+
+	layer = container_of(head, struct idr_layer, rcu_head);
+	kmem_cache_free(idr_layer_cache, layer);
+}
+
+static inline void free_layer(struct idr_layer *p)
+{
+	call_rcu(&p->rcu_head, idr_layer_rcu_free);
+}
+
 /* only called when idp->lock is held */
-static void __free_layer(struct idr *idp, struct idr_layer *p)
+static void __move_to_free_list(struct idr *idp, struct idr_layer *p)
 {
 	p->ary[0] = idp->id_free;
 	idp->id_free = p;
 	idp->id_free_cnt++;
 }
 
-static void free_layer(struct idr *idp, struct idr_layer *p)
+static void move_to_free_list(struct idr *idp, struct idr_layer *p)
 {
 	unsigned long flags;
 
@@ -66,7 +81,7 @@ static void free_layer(struct idr *idp, struct idr_layer *p)
 	 * Depends on the return element being zeroed.
 	 */
 	spin_lock_irqsave(&idp->lock, flags);
-	__free_layer(idp, p);
+	__move_to_free_list(idp, p);
 	spin_unlock_irqrestore(&idp->lock, flags);
 }
 
@@ -96,7 +111,7 @@ static void idr_mark_full(struct idr_layer **pa, int id)
  * @gfp_mask:	memory allocation flags
  *
  * This function should be called prior to locking and calling the
- * following function.  It preallocates enough memory to satisfy
+ * idr_get_new* functions. It preallocates enough memory to satisfy
  * the worst possible allocation.
  *
  * If the system is REALLY out of memory this function returns 0,
@@ -109,7 +124,7 @@ int idr_pre_get(struct idr *idp, gfp_t gfp_mask)
 		new = kmem_cache_alloc(idr_layer_cache, gfp_mask);
 		if (new == NULL)
 			return (0);
-		free_layer(idp, new);
+		move_to_free_list(idp, new);
 	}
 	return 1;
 }
@@ -143,7 +158,7 @@ static int sub_alloc(struct idr *idp, int *starting_id, struct idr_layer **pa)
 			/* if already at the top layer, we need to grow */
 			if (!(p = pa[l])) {
 				*starting_id = id;
-				return -2;
+				return IDR_NEED_TO_GROW;
 			}
 
 			/* If we need to go up one layer, continue the
@@ -160,16 +175,17 @@ static int sub_alloc(struct idr *idp, int *starting_id, struct idr_layer **pa)
 			id = ((id >> sh) ^ n ^ m) << sh;
 		}
 		if ((id >= MAX_ID_BIT) || (id < 0))
-			return -3;
+			return IDR_NOMORE_SPACE;
 		if (l == 0)
 			break;
 		/*
 		 * Create the layer below if it is missing.
 		 */
 		if (!p->ary[m]) {
-			if (!(new = alloc_layer(idp)))
+			new = get_from_free_list(idp);
+			if (!new)
 				return -1;
-			p->ary[m] = new;
+			rcu_assign_pointer(p->ary[m], new);
 			p->count++;
 		}
 		pa[l--] = p;
@@ -192,7 +208,7 @@ build_up:
 	p = idp->top;
 	layers = idp->layers;
 	if (unlikely(!p)) {
-		if (!(p = alloc_layer(idp)))
+		if (!(p = get_from_free_list(idp)))
 			return -1;
 		layers = 1;
 	}
@@ -204,7 +220,7 @@ build_up:
 		layers++;
 		if (!p->count)
 			continue;
-		if (!(new = alloc_layer(idp))) {
+		if (!(new = get_from_free_list(idp))) {
 			/*
 			 * The allocation failed.  If we built part of
 			 * the structure tear it down.
@@ -214,7 +230,7 @@ build_up:
 				p = p->ary[0];
 				new->ary[0] = NULL;
 				new->bitmap = new->count = 0;
-				__free_layer(idp, new);
+				__move_to_free_list(idp, new);
 			}
 			spin_unlock_irqrestore(&idp->lock, flags);
 			return -1;
@@ -225,10 +241,10 @@ build_up:
 			__set_bit(0, &new->bitmap);
 		p = new;
 	}
-	idp->top = p;
+	rcu_assign_pointer(idp->top, p);
 	idp->layers = layers;
 	v = sub_alloc(idp, &id, pa);
-	if (v == -2)
+	if (v == IDR_NEED_TO_GROW)
 		goto build_up;
 	return(v);
 }
@@ -244,7 +260,8 @@ static int idr_get_new_above_int(struct idr *idp, void *ptr, int starting_id)
 		 * Successfully found an empty slot.  Install the user
 		 * pointer and mark the slot full.
 		 */
-		pa[0]->ary[id & IDR_MASK] = (struct idr_layer *)ptr;
+		rcu_assign_pointer(pa[0]->ary[id & IDR_MASK],
+				(struct idr_layer *)ptr);
 		pa[0]->count++;
 		idr_mark_full(pa, id);
 	}
@@ -277,12 +294,8 @@ int idr_get_new_above(struct idr *idp, void *ptr, int starting_id, int *id)
 	 * This is a cheap hack until the IDR code can be fixed to
 	 * return proper error values.
 	 */
-	if (rv < 0) {
-		if (rv == -1)
-			return -EAGAIN;
-		else /* Will be -3 */
-			return -ENOSPC;
-	}
+	if (rv < 0)
+		return _idr_rc_to_errno(rv);
 	*id = rv;
 	return 0;
 }
@@ -312,12 +325,8 @@ int idr_get_new(struct idr *idp, void *ptr, int *id)
 	 * This is a cheap hack until the IDR code can be fixed to
 	 * return proper error values.
 	 */
-	if (rv < 0) {
-		if (rv == -1)
-			return -EAGAIN;
-		else /* Will be -3 */
-			return -ENOSPC;
-	}
+	if (rv < 0)
+		return _idr_rc_to_errno(rv);
 	*id = rv;
 	return 0;
 }
@@ -325,7 +334,8 @@ EXPORT_SYMBOL(idr_get_new);
 
 static void idr_remove_warning(int id)
 {
-	printk("idr_remove called for id=%d which is not allocated.\n", id);
+	printk(KERN_WARNING
+		"idr_remove called for id=%d which is not allocated.\n", id);
 	dump_stack();
 }
 
@@ -334,6 +344,7 @@ static void sub_remove(struct idr *idp, int shift, int id)
 	struct idr_layer *p = idp->top;
 	struct idr_layer **pa[MAX_LEVEL];
 	struct idr_layer ***paa = &pa[0];
+	struct idr_layer *to_free;
 	int n;
 
 	*paa = NULL;
@@ -349,13 +360,18 @@ static void sub_remove(struct idr *idp, int shift, int id)
 	n = id & IDR_MASK;
 	if (likely(p != NULL && test_bit(n, &p->bitmap))){
 		__clear_bit(n, &p->bitmap);
-		p->ary[n] = NULL;
+		rcu_assign_pointer(p->ary[n], NULL);
+		to_free = NULL;
 		while(*paa && ! --((**paa)->count)){
-			free_layer(idp, **paa);
+			if (to_free)
+				free_layer(to_free);
+			to_free = **paa;
 			**paa-- = NULL;
 		}
 		if (!*paa)
 			idp->layers = 0;
+		if (to_free)
+			free_layer(to_free);
 	} else
 		idr_remove_warning(id);
 }
@@ -368,22 +384,34 @@ static void sub_remove(struct idr *idp, int shift, int id)
 void idr_remove(struct idr *idp, int id)
 {
 	struct idr_layer *p;
+	struct idr_layer *to_free;
 
 	/* Mask off upper bits we don't use for the search. */
 	id &= MAX_ID_MASK;
 
 	sub_remove(idp, (idp->layers - 1) * IDR_BITS, id);
 	if (idp->top && idp->top->count == 1 && (idp->layers > 1) &&
-	    idp->top->ary[0]) {  // We can drop a layer
-
+	    idp->top->ary[0]) {
+		/*
+		 * Single child at leftmost slot: we can shrink the tree.
+		 * This level is not needed anymore since when layers are
+		 * inserted, they are inserted at the top of the existing
+		 * tree.
+		 */
+		to_free = idp->top;
 		p = idp->top->ary[0];
-		idp->top->bitmap = idp->top->count = 0;
-		free_layer(idp, idp->top);
-		idp->top = p;
+		rcu_assign_pointer(idp->top, p);
 		--idp->layers;
+		to_free->bitmap = to_free->count = 0;
+		free_layer(to_free);
 	}
 	while (idp->id_free_cnt >= IDR_FREE_MAX) {
-		p = alloc_layer(idp);
+		p = get_from_free_list(idp);
+		/*
+		 * Note: we don't call the rcu callback here, since the only
+		 * layers that fall into the freelist are those that have been
+		 * preallocated.
+		 */
 		kmem_cache_free(idr_layer_cache, p);
 	}
 	return;
@@ -424,15 +452,13 @@ void idr_remove_all(struct idr *idp)
 
 		id += 1 << n;
 		while (n < fls(id)) {
-			if (p) {
-				memset(p, 0, sizeof *p);
-				free_layer(idp, p);
-			}
+			if (p)
+				free_layer(p);
 			n += IDR_BITS;
 			p = *--paa;
 		}
 	}
-	idp->top = NULL;
+	rcu_assign_pointer(idp->top, NULL);
 	idp->layers = 0;
 }
 EXPORT_SYMBOL(idr_remove_all);
@@ -444,7 +470,7 @@ EXPORT_SYMBOL(idr_remove_all);
 void idr_destroy(struct idr *idp)
 {
 	while (idp->id_free_cnt) {
-		struct idr_layer *p = alloc_layer(idp);
+		struct idr_layer *p = get_from_free_list(idp);
 		kmem_cache_free(idr_layer_cache, p);
 	}
 }
@@ -459,7 +485,8 @@ EXPORT_SYMBOL(idr_destroy);
  * return indicates that @id is not valid or you passed %NULL in
  * idr_get_new().
  *
- * The caller must serialize idr_find() vs idr_get_new() and idr_remove().
+ * This function can be called under rcu_read_lock(), given that the leaf
+ * pointers lifetimes are correctly managed.
  */
 void *idr_find(struct idr *idp, int id)
 {
@@ -467,7 +494,7 @@ void *idr_find(struct idr *idp, int id)
 	struct idr_layer *p;
 
 	n = idp->layers * IDR_BITS;
-	p = idp->top;
+	p = rcu_dereference(idp->top);
 
 	/* Mask off upper bits we don't use for the search. */
 	id &= MAX_ID_MASK;
@@ -477,7 +504,7 @@ void *idr_find(struct idr *idp, int id)
 
 	while (n > 0 && p) {
 		n -= IDR_BITS;
-		p = p->ary[(id >> n) & IDR_MASK];
+		p = rcu_dereference(p->ary[(id >> n) & IDR_MASK]);
 	}
 	return((void *)p);
 }
@@ -510,7 +537,7 @@ int idr_for_each(struct idr *idp,
 	struct idr_layer **paa = &pa[0];
 
 	n = idp->layers * IDR_BITS;
-	p = idp->top;
+	p = rcu_dereference(idp->top);
 	max = 1 << n;
 
 	id = 0;
@@ -518,7 +545,7 @@ int idr_for_each(struct idr *idp,
 		while (n > 0 && p) {
 			n -= IDR_BITS;
 			*paa++ = p;
-			p = p->ary[(id >> n) & IDR_MASK];
+			p = rcu_dereference(p->ary[(id >> n) & IDR_MASK]);
 		}
 
 		if (p) {
@@ -548,7 +575,7 @@ EXPORT_SYMBOL(idr_for_each);
  * A -ENOENT return indicates that @id was not found.
  * A -EINVAL return indicates that @id was not within valid constraints.
  *
- * The caller must serialize vs idr_find(), idr_get_new(), and idr_remove().
+ * The caller must serialize with writers.
  */
 void *idr_replace(struct idr *idp, void *ptr, int id)
 {
@@ -574,13 +601,13 @@ void *idr_replace(struct idr *idp, void *ptr, int id)
 		return ERR_PTR(-ENOENT);
 
 	old_p = p->ary[n];
-	p->ary[n] = ptr;
+	rcu_assign_pointer(p->ary[n], ptr);
 
 	return old_p;
 }
 EXPORT_SYMBOL(idr_replace);
 
-static void idr_cache_ctor(struct kmem_cache *idr_layer_cache, void *idr_layer)
+static void idr_cache_ctor(void *idr_layer)
 {
 	memset(idr_layer, 0, sizeof(struct idr_layer));
 }
@@ -694,12 +721,8 @@ int ida_get_new_above(struct ida *ida, int starting_id, int *p_id)
  restart:
 	/* get vacant slot */
 	t = idr_get_empty_slot(&ida->idr, idr_id, pa);
-	if (t < 0) {
-		if (t == -1)
-			return -EAGAIN;
-		else /* will be -3 */
-			return -ENOSPC;
-	}
+	if (t < 0)
+		return _idr_rc_to_errno(t);
 
 	if (t * IDA_BITMAP_BITS >= MAX_ID_BIT)
 		return -ENOSPC;
@@ -720,7 +743,8 @@ int ida_get_new_above(struct ida *ida, int starting_id, int *p_id)
 			return -EAGAIN;
 
 		memset(bitmap, 0, sizeof(struct ida_bitmap));
-		pa[0]->ary[idr_id & IDR_MASK] = (void *)bitmap;
+		rcu_assign_pointer(pa[0]->ary[idr_id & IDR_MASK],
+				(void *)bitmap);
 		pa[0]->count++;
 	}
 
@@ -749,7 +773,7 @@ int ida_get_new_above(struct ida *ida, int starting_id, int *p_id)
 	 * allocation.
 	 */
 	if (ida->idr.id_free_cnt || ida->free_bitmap) {
-		struct idr_layer *p = alloc_layer(&ida->idr);
+		struct idr_layer *p = get_from_free_list(&ida->idr);
 		if (p)
 			kmem_cache_free(idr_layer_cache, p);
 	}
diff --git a/lib/inflate.c b/lib/inflate.c
index 9762294be062..1a8e8a978128 100644
--- a/lib/inflate.c
+++ b/lib/inflate.c
@@ -230,6 +230,45 @@ STATIC const ush mask_bits[] = {
 #define NEEDBITS(n) {while(k<(n)){b|=((ulg)NEXTBYTE())<<k;k+=8;}}
 #define DUMPBITS(n) {b>>=(n);k-=(n);}
 
+#ifndef NO_INFLATE_MALLOC
+/* A trivial malloc implementation, adapted from
+ *  malloc by Hannu Savolainen 1993 and Matthias Urlichs 1994
+ */
+
+static unsigned long malloc_ptr;
+static int malloc_count;
+
+static void *malloc(int size)
+{
+       void *p;
+
+       if (size < 0)
+		error("Malloc error");
+       if (!malloc_ptr)
+		malloc_ptr = free_mem_ptr;
+
+       malloc_ptr = (malloc_ptr + 3) & ~3;     /* Align */
+
+       p = (void *)malloc_ptr;
+       malloc_ptr += size;
+
+       if (free_mem_end_ptr && malloc_ptr >= free_mem_end_ptr)
+		error("Out of memory");
+
+       malloc_count++;
+       return p;
+}
+
+static void free(void *where)
+{
+       malloc_count--;
+       if (!malloc_count)
+		malloc_ptr = free_mem_ptr;
+}
+#else
+#define malloc(a) kmalloc(a, GFP_KERNEL)
+#define free(a) kfree(a)
+#endif
 
 /*
    Huffman code decoding is performed using a multi-level table lookup.
@@ -1045,7 +1084,6 @@ STATIC int INIT inflate(void)
   int e;                /* last block flag */
   int r;                /* result code */
   unsigned h;           /* maximum struct huft's malloc'ed */
-  void *ptr;
 
   /* initialize window, bit buffer */
   wp = 0;
@@ -1057,12 +1095,12 @@ STATIC int INIT inflate(void)
   h = 0;
   do {
     hufts = 0;
-    gzip_mark(&ptr);
-    if ((r = inflate_block(&e)) != 0) {
-      gzip_release(&ptr);	    
-      return r;
-    }
-    gzip_release(&ptr);
+#ifdef ARCH_HAS_DECOMP_WDOG
+    arch_decomp_wdog();
+#endif
+    r = inflate_block(&e);
+    if (r)
+	    return r;
     if (hufts > h)
       h = hufts;
   } while (!e);
diff --git a/lib/iomap.c b/lib/iomap.c
index 37a3ea4cac9f..d32229385151 100644
--- a/lib/iomap.c
+++ b/lib/iomap.c
@@ -40,8 +40,7 @@ static void bad_io_access(unsigned long port, const char *access)
 	static int count = 10;
 	if (count) {
 		count--;
-		printk(KERN_ERR "Bad IO access at port %#lx (%s)\n", port, access);
-		WARN_ON(1);
+		WARN(1, KERN_ERR "Bad IO access at port %#lx (%s)\n", port, access);
 	}
 }
 
diff --git a/lib/kobject.c b/lib/kobject.c
index 744401571ed7..fbf0ae282376 100644
--- a/lib/kobject.c
+++ b/lib/kobject.c
@@ -164,9 +164,8 @@ static int kobject_add_internal(struct kobject *kobj)
 		return -ENOENT;
 
 	if (!kobj->name || !kobj->name[0]) {
-		pr_debug("kobject: (%p): attempted to be registered with empty "
+		WARN(1, "kobject: (%p): attempted to be registered with empty "
 			 "name!\n", kobj);
-		WARN_ON(1);
 		return -EINVAL;
 	}
 
@@ -224,8 +223,7 @@ static int kobject_set_name_vargs(struct kobject *kobj, const char *fmt,
 		return -ENOMEM;
 
 	/* ewww... some of these buggers have '/' in the name ... */
-	s = strchr(kobj->name, '/');
-	if (s)
+	while ((s = strchr(kobj->name, '/')))
 		s[0] = '!';
 
 	kfree(old_name);
@@ -583,12 +581,10 @@ static void kobject_release(struct kref *kref)
 void kobject_put(struct kobject *kobj)
 {
 	if (kobj) {
-		if (!kobj->state_initialized) {
-			printk(KERN_WARNING "kobject: '%s' (%p): is not "
+		if (!kobj->state_initialized)
+			WARN(1, KERN_WARNING "kobject: '%s' (%p): is not "
 			       "initialized, yet kobject_put() is being "
 			       "called.\n", kobject_name(kobj), kobj);
-			WARN_ON(1);
-		}
 		kref_put(&kobj->kref, kobject_release);
 	}
 }
diff --git a/lib/kobject_uevent.c b/lib/kobject_uevent.c
index 9f8d599459d1..3f914725bda8 100644
--- a/lib/kobject_uevent.c
+++ b/lib/kobject_uevent.c
@@ -285,8 +285,7 @@ int add_uevent_var(struct kobj_uevent_env *env, const char *format, ...)
 	int len;
 
 	if (env->envp_idx >= ARRAY_SIZE(env->envp)) {
-		printk(KERN_ERR "add_uevent_var: too many keys\n");
-		WARN_ON(1);
+		WARN(1, KERN_ERR "add_uevent_var: too many keys\n");
 		return -ENOMEM;
 	}
 
@@ -297,8 +296,7 @@ int add_uevent_var(struct kobj_uevent_env *env, const char *format, ...)
 	va_end(args);
 
 	if (len >= (sizeof(env->buf) - env->buflen)) {
-		printk(KERN_ERR "add_uevent_var: buffer size too small\n");
-		WARN_ON(1);
+		WARN(1, KERN_ERR "add_uevent_var: buffer size too small\n");
 		return -ENOMEM;
 	}
 
diff --git a/lib/list_debug.c b/lib/list_debug.c
index 4350ba9655bd..1a39f4e3ae1f 100644
--- a/lib/list_debug.c
+++ b/lib/list_debug.c
@@ -20,18 +20,14 @@ void __list_add(struct list_head *new,
 			      struct list_head *prev,
 			      struct list_head *next)
 {
-	if (unlikely(next->prev != prev)) {
-		printk(KERN_ERR "list_add corruption. next->prev should be "
-			"prev (%p), but was %p. (next=%p).\n",
-			prev, next->prev, next);
-		BUG();
-	}
-	if (unlikely(prev->next != next)) {
-		printk(KERN_ERR "list_add corruption. prev->next should be "
-			"next (%p), but was %p. (prev=%p).\n",
-			next, prev->next, prev);
-		BUG();
-	}
+	WARN(next->prev != prev,
+		"list_add corruption. next->prev should be "
+		"prev (%p), but was %p. (next=%p).\n",
+		prev, next->prev, next);
+	WARN(prev->next != next,
+		"list_add corruption. prev->next should be "
+		"next (%p), but was %p. (prev=%p).\n",
+		next, prev->next, prev);
 	next->prev = new;
 	new->next = next;
 	new->prev = prev;
@@ -40,20 +36,6 @@ void __list_add(struct list_head *new,
 EXPORT_SYMBOL(__list_add);
 
 /**
- * list_add - add a new entry
- * @new: new entry to be added
- * @head: list head to add it after
- *
- * Insert a new entry after the specified head.
- * This is good for implementing stacks.
- */
-void list_add(struct list_head *new, struct list_head *head)
-{
-	__list_add(new, head, head->next);
-}
-EXPORT_SYMBOL(list_add);
-
-/**
  * list_del - deletes entry from list.
  * @entry: the element to delete from the list.
  * Note: list_empty on entry does not return true after this, the entry is
@@ -61,16 +43,12 @@ EXPORT_SYMBOL(list_add);
  */
 void list_del(struct list_head *entry)
 {
-	if (unlikely(entry->prev->next != entry)) {
-		printk(KERN_ERR "list_del corruption. prev->next should be %p, "
-				"but was %p\n", entry, entry->prev->next);
-		BUG();
-	}
-	if (unlikely(entry->next->prev != entry)) {
-		printk(KERN_ERR "list_del corruption. next->prev should be %p, "
-				"but was %p\n", entry, entry->next->prev);
-		BUG();
-	}
+	WARN(entry->prev->next != entry,
+		"list_del corruption. prev->next should be %p, "
+		"but was %p\n", entry, entry->prev->next);
+	WARN(entry->next->prev != entry,
+		"list_del corruption. next->prev should be %p, "
+		"but was %p\n", entry, entry->next->prev);
 	__list_del(entry->prev, entry->next);
 	entry->next = LIST_POISON1;
 	entry->prev = LIST_POISON2;
diff --git a/lib/lmb.c b/lib/lmb.c
index 5d7b9286503e..97e547037084 100644
--- a/lib/lmb.c
+++ b/lib/lmb.c
@@ -462,6 +462,8 @@ void __init lmb_enforce_memory_limit(u64 memory_limit)
 	if (lmb.memory.region[0].size < lmb.rmo_size)
 		lmb.rmo_size = lmb.memory.region[0].size;
 
+	memory_limit = lmb_end_of_DRAM();
+
 	/* And truncate any reserves above the limit also. */
 	for (i = 0; i < lmb.reserved.cnt; i++) {
 		p = &lmb.reserved.region[i];
diff --git a/lib/lzo/lzo1x_decompress.c b/lib/lzo/lzo1x_decompress.c
index 77f0f9b775a9..5dc6b29c1575 100644
--- a/lib/lzo/lzo1x_decompress.c
+++ b/lib/lzo/lzo1x_decompress.c
@@ -138,8 +138,7 @@ match:
 					t += 31 + *ip++;
 				}
 				m_pos = op - 1;
-				m_pos -= le16_to_cpu(get_unaligned(
-					(const unsigned short *)ip)) >> 2;
+				m_pos -= get_unaligned_le16(ip) >> 2;
 				ip += 2;
 			} else if (t >= 16) {
 				m_pos = op;
@@ -157,8 +156,7 @@ match:
 					}
 					t += 7 + *ip++;
 				}
-				m_pos -= le16_to_cpu(get_unaligned(
-					(const unsigned short *)ip)) >> 2;
+				m_pos -= get_unaligned_le16(ip) >> 2;
 				ip += 2;
 				if (m_pos == op)
 					goto eof_found;
diff --git a/lib/plist.c b/lib/plist.c
index 3074a02272f3..d6c64a824e1d 100644
--- a/lib/plist.c
+++ b/lib/plist.c
@@ -31,12 +31,13 @@
 static void plist_check_prev_next(struct list_head *t, struct list_head *p,
 				  struct list_head *n)
 {
-	if (n->prev != p || p->next != n) {
-		printk("top: %p, n: %p, p: %p\n", t, t->next, t->prev);
-		printk("prev: %p, n: %p, p: %p\n", p, p->next, p->prev);
-		printk("next: %p, n: %p, p: %p\n", n, n->next, n->prev);
-		WARN_ON(1);
-	}
+	WARN(n->prev != p || p->next != n,
+			"top: %p, n: %p, p: %p\n"
+			"prev: %p, n: %p, p: %p\n"
+			"next: %p, n: %p, p: %p\n",
+			 t, t->next, t->prev,
+			p, p->next, p->prev,
+			n, n->next, n->prev);
 }
 
 static void plist_check_list(struct list_head *top)
diff --git a/lib/radix-tree.c b/lib/radix-tree.c
index 56ec21a7f73d..be86b32bc874 100644
--- a/lib/radix-tree.c
+++ b/lib/radix-tree.c
@@ -359,18 +359,17 @@ EXPORT_SYMBOL(radix_tree_insert);
  *	Returns:  the slot corresponding to the position @index in the
  *	radix tree @root. This is useful for update-if-exists operations.
  *
- *	This function cannot be called under rcu_read_lock, it must be
- *	excluded from writers, as must the returned slot for subsequent
- *	use by radix_tree_deref_slot() and radix_tree_replace slot.
- *	Caller must hold tree write locked across slot lookup and
- *	replace.
+ *	This function can be called under rcu_read_lock iff the slot is not
+ *	modified by radix_tree_replace_slot, otherwise it must be called
+ *	exclusive from other writers. Any dereference of the slot must be done
+ *	using radix_tree_deref_slot.
  */
 void **radix_tree_lookup_slot(struct radix_tree_root *root, unsigned long index)
 {
 	unsigned int height, shift;
 	struct radix_tree_node *node, **slot;
 
-	node = root->rnode;
+	node = rcu_dereference(root->rnode);
 	if (node == NULL)
 		return NULL;
 
@@ -390,7 +389,7 @@ void **radix_tree_lookup_slot(struct radix_tree_root *root, unsigned long index)
 	do {
 		slot = (struct radix_tree_node **)
 			(node->slots + ((index>>shift) & RADIX_TREE_MAP_MASK));
-		node = *slot;
+		node = rcu_dereference(*slot);
 		if (node == NULL)
 			return NULL;
 
@@ -667,7 +666,7 @@ unsigned long radix_tree_next_hole(struct radix_tree_root *root,
 EXPORT_SYMBOL(radix_tree_next_hole);
 
 static unsigned int
-__lookup(struct radix_tree_node *slot, void **results, unsigned long index,
+__lookup(struct radix_tree_node *slot, void ***results, unsigned long index,
 	unsigned int max_items, unsigned long *next_index)
 {
 	unsigned int nr_found = 0;
@@ -701,11 +700,9 @@ __lookup(struct radix_tree_node *slot, void **results, unsigned long index,
 
 	/* Bottom level: grab some items */
 	for (i = index & RADIX_TREE_MAP_MASK; i < RADIX_TREE_MAP_SIZE; i++) {
-		struct radix_tree_node *node;
 		index++;
-		node = slot->slots[i];
-		if (node) {
-			results[nr_found++] = rcu_dereference(node);
+		if (slot->slots[i]) {
+			results[nr_found++] = &(slot->slots[i]);
 			if (nr_found == max_items)
 				goto out;
 		}
@@ -759,13 +756,22 @@ radix_tree_gang_lookup(struct radix_tree_root *root, void **results,
 
 	ret = 0;
 	while (ret < max_items) {
-		unsigned int nr_found;
+		unsigned int nr_found, slots_found, i;
 		unsigned long next_index;	/* Index of next search */
 
 		if (cur_index > max_index)
 			break;
-		nr_found = __lookup(node, results + ret, cur_index,
+		slots_found = __lookup(node, (void ***)results + ret, cur_index,
 					max_items - ret, &next_index);
+		nr_found = 0;
+		for (i = 0; i < slots_found; i++) {
+			struct radix_tree_node *slot;
+			slot = *(((void ***)results)[ret + i]);
+			if (!slot)
+				continue;
+			results[ret + nr_found] = rcu_dereference(slot);
+			nr_found++;
+		}
 		ret += nr_found;
 		if (next_index == 0)
 			break;
@@ -776,12 +782,71 @@ radix_tree_gang_lookup(struct radix_tree_root *root, void **results,
 }
 EXPORT_SYMBOL(radix_tree_gang_lookup);
 
+/**
+ *	radix_tree_gang_lookup_slot - perform multiple slot lookup on radix tree
+ *	@root:		radix tree root
+ *	@results:	where the results of the lookup are placed
+ *	@first_index:	start the lookup from this key
+ *	@max_items:	place up to this many items at *results
+ *
+ *	Performs an index-ascending scan of the tree for present items.  Places
+ *	their slots at *@results and returns the number of items which were
+ *	placed at *@results.
+ *
+ *	The implementation is naive.
+ *
+ *	Like radix_tree_gang_lookup as far as RCU and locking goes. Slots must
+ *	be dereferenced with radix_tree_deref_slot, and if using only RCU
+ *	protection, radix_tree_deref_slot may fail requiring a retry.
+ */
+unsigned int
+radix_tree_gang_lookup_slot(struct radix_tree_root *root, void ***results,
+			unsigned long first_index, unsigned int max_items)
+{
+	unsigned long max_index;
+	struct radix_tree_node *node;
+	unsigned long cur_index = first_index;
+	unsigned int ret;
+
+	node = rcu_dereference(root->rnode);
+	if (!node)
+		return 0;
+
+	if (!radix_tree_is_indirect_ptr(node)) {
+		if (first_index > 0)
+			return 0;
+		results[0] = (void **)&root->rnode;
+		return 1;
+	}
+	node = radix_tree_indirect_to_ptr(node);
+
+	max_index = radix_tree_maxindex(node->height);
+
+	ret = 0;
+	while (ret < max_items) {
+		unsigned int slots_found;
+		unsigned long next_index;	/* Index of next search */
+
+		if (cur_index > max_index)
+			break;
+		slots_found = __lookup(node, results + ret, cur_index,
+					max_items - ret, &next_index);
+		ret += slots_found;
+		if (next_index == 0)
+			break;
+		cur_index = next_index;
+	}
+
+	return ret;
+}
+EXPORT_SYMBOL(radix_tree_gang_lookup_slot);
+
 /*
  * FIXME: the two tag_get()s here should use find_next_bit() instead of
  * open-coding the search.
  */
 static unsigned int
-__lookup_tag(struct radix_tree_node *slot, void **results, unsigned long index,
+__lookup_tag(struct radix_tree_node *slot, void ***results, unsigned long index,
 	unsigned int max_items, unsigned long *next_index, unsigned int tag)
 {
 	unsigned int nr_found = 0;
@@ -811,11 +876,9 @@ __lookup_tag(struct radix_tree_node *slot, void **results, unsigned long index,
 			unsigned long j = index & RADIX_TREE_MAP_MASK;
 
 			for ( ; j < RADIX_TREE_MAP_SIZE; j++) {
-				struct radix_tree_node *node;
 				index++;
 				if (!tag_get(slot, tag, j))
 					continue;
-				node = slot->slots[j];
 				/*
 				 * Even though the tag was found set, we need to
 				 * recheck that we have a non-NULL node, because
@@ -826,9 +889,8 @@ __lookup_tag(struct radix_tree_node *slot, void **results, unsigned long index,
 				 * lookup ->slots[x] without a lock (ie. can't
 				 * rely on its value remaining the same).
 				 */
-				if (node) {
-					node = rcu_dereference(node);
-					results[nr_found++] = node;
+				if (slot->slots[j]) {
+					results[nr_found++] = &(slot->slots[j]);
 					if (nr_found == max_items)
 						goto out;
 				}
@@ -887,13 +949,22 @@ radix_tree_gang_lookup_tag(struct radix_tree_root *root, void **results,
 
 	ret = 0;
 	while (ret < max_items) {
-		unsigned int nr_found;
+		unsigned int nr_found, slots_found, i;
 		unsigned long next_index;	/* Index of next search */
 
 		if (cur_index > max_index)
 			break;
-		nr_found = __lookup_tag(node, results + ret, cur_index,
-					max_items - ret, &next_index, tag);
+		slots_found = __lookup_tag(node, (void ***)results + ret,
+				cur_index, max_items - ret, &next_index, tag);
+		nr_found = 0;
+		for (i = 0; i < slots_found; i++) {
+			struct radix_tree_node *slot;
+			slot = *(((void ***)results)[ret + i]);
+			if (!slot)
+				continue;
+			results[ret + nr_found] = rcu_dereference(slot);
+			nr_found++;
+		}
 		ret += nr_found;
 		if (next_index == 0)
 			break;
@@ -905,6 +976,67 @@ radix_tree_gang_lookup_tag(struct radix_tree_root *root, void **results,
 EXPORT_SYMBOL(radix_tree_gang_lookup_tag);
 
 /**
+ *	radix_tree_gang_lookup_tag_slot - perform multiple slot lookup on a
+ *					  radix tree based on a tag
+ *	@root:		radix tree root
+ *	@results:	where the results of the lookup are placed
+ *	@first_index:	start the lookup from this key
+ *	@max_items:	place up to this many items at *results
+ *	@tag:		the tag index (< RADIX_TREE_MAX_TAGS)
+ *
+ *	Performs an index-ascending scan of the tree for present items which
+ *	have the tag indexed by @tag set.  Places the slots at *@results and
+ *	returns the number of slots which were placed at *@results.
+ */
+unsigned int
+radix_tree_gang_lookup_tag_slot(struct radix_tree_root *root, void ***results,
+		unsigned long first_index, unsigned int max_items,
+		unsigned int tag)
+{
+	struct radix_tree_node *node;
+	unsigned long max_index;
+	unsigned long cur_index = first_index;
+	unsigned int ret;
+
+	/* check the root's tag bit */
+	if (!root_tag_get(root, tag))
+		return 0;
+
+	node = rcu_dereference(root->rnode);
+	if (!node)
+		return 0;
+
+	if (!radix_tree_is_indirect_ptr(node)) {
+		if (first_index > 0)
+			return 0;
+		results[0] = (void **)&root->rnode;
+		return 1;
+	}
+	node = radix_tree_indirect_to_ptr(node);
+
+	max_index = radix_tree_maxindex(node->height);
+
+	ret = 0;
+	while (ret < max_items) {
+		unsigned int slots_found;
+		unsigned long next_index;	/* Index of next search */
+
+		if (cur_index > max_index)
+			break;
+		slots_found = __lookup_tag(node, results + ret,
+				cur_index, max_items - ret, &next_index, tag);
+		ret += slots_found;
+		if (next_index == 0)
+			break;
+		cur_index = next_index;
+	}
+
+	return ret;
+}
+EXPORT_SYMBOL(radix_tree_gang_lookup_tag_slot);
+
+
+/**
  *	radix_tree_shrink    -    shrink height of a radix tree to minimal
  *	@root		radix tree root
  */
@@ -1051,7 +1183,7 @@ int radix_tree_tagged(struct radix_tree_root *root, unsigned int tag)
 EXPORT_SYMBOL(radix_tree_tagged);
 
 static void
-radix_tree_node_ctor(struct kmem_cache *cachep, void *node)
+radix_tree_node_ctor(void *node)
 {
 	memset(node, 0, sizeof(struct radix_tree_node));
 }
diff --git a/lib/random32.c b/lib/random32.c
index ca87d86992bd..217d5c4b666d 100644
--- a/lib/random32.c
+++ b/lib/random32.c
@@ -56,23 +56,12 @@ static u32 __random32(struct rnd_state *state)
 	return (state->s1 ^ state->s2 ^ state->s3);
 }
 
-static void __set_random32(struct rnd_state *state, unsigned long s)
+/*
+ * Handle minimum values for seeds
+ */
+static inline u32 __seed(u32 x, u32 m)
 {
-	if (s == 0)
-		s = 1;      /* default seed is 1 */
-
-#define LCG(n) (69069 * n)
-	state->s1 = LCG(s);
-	state->s2 = LCG(state->s1);
-	state->s3 = LCG(state->s2);
-
-	/* "warm it up" */
-	__random32(state);
-	__random32(state);
-	__random32(state);
-	__random32(state);
-	__random32(state);
-	__random32(state);
+	return (x < m) ? x + m : x;
 }
 
 /**
@@ -107,7 +96,7 @@ void srandom32(u32 entropy)
 	 */
 	for_each_possible_cpu (i) {
 		struct rnd_state *state = &per_cpu(net_rand_state, i);
-		__set_random32(state, state->s1 ^ entropy);
+		state->s1 = __seed(state->s1 ^ entropy, 1);
 	}
 }
 EXPORT_SYMBOL(srandom32);
@@ -122,7 +111,19 @@ static int __init random32_init(void)
 
 	for_each_possible_cpu(i) {
 		struct rnd_state *state = &per_cpu(net_rand_state,i);
-		__set_random32(state, i + jiffies);
+
+#define LCG(x)	((x) * 69069)	/* super-duper LCG */
+		state->s1 = __seed(LCG(i + jiffies), 1);
+		state->s2 = __seed(LCG(state->s1), 7);
+		state->s3 = __seed(LCG(state->s2), 15);
+
+		/* "warm it up" */
+		__random32(state);
+		__random32(state);
+		__random32(state);
+		__random32(state);
+		__random32(state);
+		__random32(state);
 	}
 	return 0;
 }
@@ -135,13 +136,18 @@ core_initcall(random32_init);
 static int __init random32_reseed(void)
 {
 	int i;
-	unsigned long seed;
 
 	for_each_possible_cpu(i) {
 		struct rnd_state *state = &per_cpu(net_rand_state,i);
+		u32 seeds[3];
+
+		get_random_bytes(&seeds, sizeof(seeds));
+		state->s1 = __seed(seeds[0], 1);
+		state->s2 = __seed(seeds[1], 7);
+		state->s3 = __seed(seeds[2], 15);
 
-		get_random_bytes(&seed, sizeof(seed));
-		__set_random32(state, seed);
+		/* mix it in */
+		__random32(state);
 	}
 	return 0;
 }
diff --git a/lib/ratelimit.c b/lib/ratelimit.c
index 485e3040dcd4..26187edcc7ea 100644
--- a/lib/ratelimit.c
+++ b/lib/ratelimit.c
@@ -3,6 +3,9 @@
  *
  * Isolated from kernel/printk.c by Dave Young <hidave.darkstar@gmail.com>
  *
+ * 2008-05-01 rewrite the function and use a ratelimit_state data struct as
+ * parameter. Now every user can use their own standalone ratelimit_state.
+ *
  * This file is released under the GPLv2.
  *
  */
@@ -11,41 +14,44 @@
 #include <linux/jiffies.h>
 #include <linux/module.h>
 
+static DEFINE_SPINLOCK(ratelimit_lock);
+
 /*
  * __ratelimit - rate limiting
- * @ratelimit_jiffies: minimum time in jiffies between two callbacks
- * @ratelimit_burst: number of callbacks we do before ratelimiting
+ * @rs: ratelimit_state data
  *
- * This enforces a rate limit: not more than @ratelimit_burst callbacks
- * in every ratelimit_jiffies
+ * This enforces a rate limit: not more than @rs->ratelimit_burst callbacks
+ * in every @rs->ratelimit_jiffies
  */
-int __ratelimit(int ratelimit_jiffies, int ratelimit_burst)
+int __ratelimit(struct ratelimit_state *rs)
 {
-	static DEFINE_SPINLOCK(ratelimit_lock);
-	static unsigned toks = 10 * 5 * HZ;
-	static unsigned long last_msg;
-	static int missed;
 	unsigned long flags;
-	unsigned long now = jiffies;
 
-	spin_lock_irqsave(&ratelimit_lock, flags);
-	toks += now - last_msg;
-	last_msg = now;
-	if (toks > (ratelimit_burst * ratelimit_jiffies))
-		toks = ratelimit_burst * ratelimit_jiffies;
-	if (toks >= ratelimit_jiffies) {
-		int lost = missed;
-
-		missed = 0;
-		toks -= ratelimit_jiffies;
-		spin_unlock_irqrestore(&ratelimit_lock, flags);
-		if (lost)
-			printk(KERN_WARNING "%s: %d messages suppressed\n",
-				__func__, lost);
+	if (!rs->interval)
 		return 1;
+
+	spin_lock_irqsave(&ratelimit_lock, flags);
+	if (!rs->begin)
+		rs->begin = jiffies;
+
+	if (time_is_before_jiffies(rs->begin + rs->interval)) {
+		if (rs->missed)
+			printk(KERN_WARNING "%s: %d callbacks suppressed\n",
+				__func__, rs->missed);
+		rs->begin = 0;
+		rs->printed = 0;
+		rs->missed = 0;
 	}
-	missed++;
+	if (rs->burst && rs->burst > rs->printed)
+		goto print;
+
+	rs->missed++;
 	spin_unlock_irqrestore(&ratelimit_lock, flags);
 	return 0;
+
+print:
+	rs->printed++;
+	spin_unlock_irqrestore(&ratelimit_lock, flags);
+	return 1;
 }
 EXPORT_SYMBOL(__ratelimit);
diff --git a/lib/show_mem.c b/lib/show_mem.c
new file mode 100644
index 000000000000..238e72a18ce1
--- /dev/null
+++ b/lib/show_mem.c
@@ -0,0 +1,63 @@
+/*
+ * Generic show_mem() implementation
+ *
+ * Copyright (C) 2008 Johannes Weiner <hannes@saeurebad.de>
+ * All code subject to the GPL version 2.
+ */
+
+#include <linux/mm.h>
+#include <linux/nmi.h>
+#include <linux/quicklist.h>
+
+void show_mem(void)
+{
+	pg_data_t *pgdat;
+	unsigned long total = 0, reserved = 0, shared = 0,
+		nonshared = 0, highmem = 0;
+
+	printk(KERN_INFO "Mem-Info:\n");
+	show_free_areas();
+
+	for_each_online_pgdat(pgdat) {
+		unsigned long i, flags;
+
+		pgdat_resize_lock(pgdat, &flags);
+		for (i = 0; i < pgdat->node_spanned_pages; i++) {
+			struct page *page;
+			unsigned long pfn = pgdat->node_start_pfn + i;
+
+			if (unlikely(!(i % MAX_ORDER_NR_PAGES)))
+				touch_nmi_watchdog();
+
+			if (!pfn_valid(pfn))
+				continue;
+
+			page = pfn_to_page(pfn);
+
+			if (PageHighMem(page))
+				highmem++;
+
+			if (PageReserved(page))
+				reserved++;
+			else if (page_count(page) == 1)
+				nonshared++;
+			else if (page_count(page) > 1)
+				shared += page_count(page) - 1;
+
+			total++;
+		}
+		pgdat_resize_unlock(pgdat, &flags);
+	}
+
+	printk(KERN_INFO "%lu pages RAM\n", total);
+#ifdef CONFIG_HIGHMEM
+	printk(KERN_INFO "%lu pages HighMem\n", highmem);
+#endif
+	printk(KERN_INFO "%lu pages reserved\n", reserved);
+	printk(KERN_INFO "%lu pages shared\n", shared);
+	printk(KERN_INFO "%lu pages non-shared\n", nonshared);
+#ifdef CONFIG_QUICKLIST
+	printk(KERN_INFO "%lu pages in pagetable cache\n",
+		quicklist_total_size());
+#endif
+}
diff --git a/lib/smp_processor_id.c b/lib/smp_processor_id.c
index c4381d9516f6..0f8fc22ed103 100644
--- a/lib/smp_processor_id.c
+++ b/lib/smp_processor_id.c
@@ -11,7 +11,6 @@ notrace unsigned int debug_smp_processor_id(void)
 {
 	unsigned long preempt_count = preempt_count();
 	int this_cpu = raw_smp_processor_id();
-	cpumask_of_cpu_ptr_declare(this_mask);
 
 	if (likely(preempt_count))
 		goto out;
@@ -23,9 +22,7 @@ notrace unsigned int debug_smp_processor_id(void)
 	 * Kernel threads bound to a single CPU can safely use
 	 * smp_processor_id():
 	 */
-	cpumask_of_cpu_ptr_next(this_mask, this_cpu);
-
-	if (cpus_equal(current->cpus_allowed, *this_mask))
+	if (cpus_equal(current->cpus_allowed, cpumask_of_cpu(this_cpu)))
 		goto out;
 
 	/*
diff --git a/lib/swiotlb.c b/lib/swiotlb.c
index d568894df8cc..977edbdbc1de 100644
--- a/lib/swiotlb.c
+++ b/lib/swiotlb.c
@@ -492,7 +492,7 @@ swiotlb_alloc_coherent(struct device *hwdev, size_t size,
 		 */
 		dma_addr_t handle;
 		handle = swiotlb_map_single(NULL, NULL, size, DMA_FROM_DEVICE);
-		if (swiotlb_dma_mapping_error(handle))
+		if (swiotlb_dma_mapping_error(hwdev, handle))
 			return NULL;
 
 		ret = bus_to_virt(handle);
@@ -824,7 +824,7 @@ swiotlb_sync_sg_for_device(struct device *hwdev, struct scatterlist *sg,
 }
 
 int
-swiotlb_dma_mapping_error(dma_addr_t dma_addr)
+swiotlb_dma_mapping_error(struct device *hwdev, dma_addr_t dma_addr)
 {
 	return (dma_addr == virt_to_bus(io_tlb_overflow_buffer));
 }
diff --git a/lib/syscall.c b/lib/syscall.c
new file mode 100644
index 000000000000..a4f7067f72fa
--- /dev/null
+++ b/lib/syscall.c
@@ -0,0 +1,75 @@
+#include <linux/ptrace.h>
+#include <linux/sched.h>
+#include <linux/module.h>
+#include <asm/syscall.h>
+
+static int collect_syscall(struct task_struct *target, long *callno,
+			   unsigned long args[6], unsigned int maxargs,
+			   unsigned long *sp, unsigned long *pc)
+{
+	struct pt_regs *regs = task_pt_regs(target);
+	if (unlikely(!regs))
+		return -EAGAIN;
+
+	*sp = user_stack_pointer(regs);
+	*pc = instruction_pointer(regs);
+
+	*callno = syscall_get_nr(target, regs);
+	if (*callno != -1L && maxargs > 0)
+		syscall_get_arguments(target, regs, 0, maxargs, args);
+
+	return 0;
+}
+
+/**
+ * task_current_syscall - Discover what a blocked task is doing.
+ * @target:		thread to examine
+ * @callno:		filled with system call number or -1
+ * @args:		filled with @maxargs system call arguments
+ * @maxargs:		number of elements in @args to fill
+ * @sp:			filled with user stack pointer
+ * @pc:			filled with user PC
+ *
+ * If @target is blocked in a system call, returns zero with *@callno
+ * set to the the call's number and @args filled in with its arguments.
+ * Registers not used for system call arguments may not be available and
+ * it is not kosher to use &struct user_regset calls while the system
+ * call is still in progress.  Note we may get this result if @target
+ * has finished its system call but not yet returned to user mode, such
+ * as when it's stopped for signal handling or syscall exit tracing.
+ *
+ * If @target is blocked in the kernel during a fault or exception,
+ * returns zero with *@callno set to -1 and does not fill in @args.
+ * If so, it's now safe to examine @target using &struct user_regset
+ * get() calls as long as we're sure @target won't return to user mode.
+ *
+ * Returns -%EAGAIN if @target does not remain blocked.
+ *
+ * Returns -%EINVAL if @maxargs is too large (maximum is six).
+ */
+int task_current_syscall(struct task_struct *target, long *callno,
+			 unsigned long args[6], unsigned int maxargs,
+			 unsigned long *sp, unsigned long *pc)
+{
+	long state;
+	unsigned long ncsw;
+
+	if (unlikely(maxargs > 6))
+		return -EINVAL;
+
+	if (target == current)
+		return collect_syscall(target, callno, args, maxargs, sp, pc);
+
+	state = target->state;
+	if (unlikely(!state))
+		return -EAGAIN;
+
+	ncsw = wait_task_inactive(target, state);
+	if (unlikely(!ncsw) ||
+	    unlikely(collect_syscall(target, callno, args, maxargs, sp, pc)) ||
+	    unlikely(wait_task_inactive(target, state) != ncsw))
+		return -EAGAIN;
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(task_current_syscall);
diff --git a/lib/vsprintf.c b/lib/vsprintf.c
index 1dc2d1d18fa8..d8d1d1142248 100644
--- a/lib/vsprintf.c
+++ b/lib/vsprintf.c
@@ -220,7 +220,7 @@ int strict_strtou##type(const char *cp, unsigned int base, valtype *res)\
 	if (len == 0)							\
 		return -EINVAL;						\
 									\
-	val = simple_strtoul(cp, &tail, base);				\
+	val = simple_strtou##type(cp, &tail, base);			\
 	if ((*tail == '\0') ||						\
 		((len == (size_t)(tail - cp) + 1) && (*tail == '\n'))) {\
 		*res = val;						\
diff --git a/mm/Kconfig b/mm/Kconfig
index aa799007a11b..0bd9c2dbb2a0 100644
--- a/mm/Kconfig
+++ b/mm/Kconfig
@@ -205,3 +205,6 @@ config NR_QUICK
 config VIRT_TO_BUS
 	def_bool y
 	depends on !ARCH_NO_VIRT_TO_BUS
+
+config MMU_NOTIFIER
+	bool
diff --git a/mm/Makefile b/mm/Makefile
index 06ca2381fef1..da4ccf015aea 100644
--- a/mm/Makefile
+++ b/mm/Makefile
@@ -25,6 +25,7 @@ obj-$(CONFIG_SHMEM) += shmem.o
 obj-$(CONFIG_TMPFS_POSIX_ACL) += shmem_acl.o
 obj-$(CONFIG_TINY_SHMEM) += tiny-shmem.o
 obj-$(CONFIG_SLOB) += slob.o
+obj-$(CONFIG_MMU_NOTIFIER) += mmu_notifier.o
 obj-$(CONFIG_SLAB) += slab.o
 obj-$(CONFIG_SLUB) += slub.o
 obj-$(CONFIG_MEMORY_HOTPLUG) += memory_hotplug.o
diff --git a/mm/allocpercpu.c b/mm/allocpercpu.c
index 843364594e23..4297bc41bfd2 100644
--- a/mm/allocpercpu.c
+++ b/mm/allocpercpu.c
@@ -18,27 +18,28 @@
  * Depopulating per-cpu data for a cpu going offline would be a typical
  * use case. You need to register a cpu hotplug handler for that purpose.
  */
-void percpu_depopulate(void *__pdata, int cpu)
+static void percpu_depopulate(void *__pdata, int cpu)
 {
 	struct percpu_data *pdata = __percpu_disguise(__pdata);
 
 	kfree(pdata->ptrs[cpu]);
 	pdata->ptrs[cpu] = NULL;
 }
-EXPORT_SYMBOL_GPL(percpu_depopulate);
 
 /**
  * percpu_depopulate_mask - depopulate per-cpu data for some cpu's
  * @__pdata: per-cpu data to depopulate
  * @mask: depopulate per-cpu data for cpu's selected through mask bits
  */
-void __percpu_depopulate_mask(void *__pdata, cpumask_t *mask)
+static void __percpu_depopulate_mask(void *__pdata, cpumask_t *mask)
 {
 	int cpu;
 	for_each_cpu_mask_nr(cpu, *mask)
 		percpu_depopulate(__pdata, cpu);
 }
-EXPORT_SYMBOL_GPL(__percpu_depopulate_mask);
+
+#define percpu_depopulate_mask(__pdata, mask) \
+	__percpu_depopulate_mask((__pdata), &(mask))
 
 /**
  * percpu_populate - populate per-cpu data for given cpu
@@ -51,7 +52,7 @@ EXPORT_SYMBOL_GPL(__percpu_depopulate_mask);
  * use case. You need to register a cpu hotplug handler for that purpose.
  * Per-cpu object is populated with zeroed buffer.
  */
-void *percpu_populate(void *__pdata, size_t size, gfp_t gfp, int cpu)
+static void *percpu_populate(void *__pdata, size_t size, gfp_t gfp, int cpu)
 {
 	struct percpu_data *pdata = __percpu_disguise(__pdata);
 	int node = cpu_to_node(cpu);
@@ -68,7 +69,6 @@ void *percpu_populate(void *__pdata, size_t size, gfp_t gfp, int cpu)
 		pdata->ptrs[cpu] = kzalloc(size, gfp);
 	return pdata->ptrs[cpu];
 }
-EXPORT_SYMBOL_GPL(percpu_populate);
 
 /**
  * percpu_populate_mask - populate per-cpu data for more cpu's
@@ -79,8 +79,8 @@ EXPORT_SYMBOL_GPL(percpu_populate);
  *
  * Per-cpu objects are populated with zeroed buffers.
  */
-int __percpu_populate_mask(void *__pdata, size_t size, gfp_t gfp,
-			   cpumask_t *mask)
+static int __percpu_populate_mask(void *__pdata, size_t size, gfp_t gfp,
+				  cpumask_t *mask)
 {
 	cpumask_t populated;
 	int cpu;
@@ -94,7 +94,9 @@ int __percpu_populate_mask(void *__pdata, size_t size, gfp_t gfp,
 			cpu_set(cpu, populated);
 	return 0;
 }
-EXPORT_SYMBOL_GPL(__percpu_populate_mask);
+
+#define percpu_populate_mask(__pdata, size, gfp, mask) \
+	__percpu_populate_mask((__pdata), (size), (gfp), &(mask))
 
 /**
  * percpu_alloc_mask - initial setup of per-cpu data
diff --git a/mm/bootmem.c b/mm/bootmem.c
index 4af15d0340ad..ad8eec6e44a8 100644
--- a/mm/bootmem.c
+++ b/mm/bootmem.c
@@ -405,6 +405,29 @@ int __init reserve_bootmem(unsigned long addr, unsigned long size,
 }
 #endif /* !CONFIG_HAVE_ARCH_BOOTMEM_NODE */
 
+static unsigned long align_idx(struct bootmem_data *bdata, unsigned long idx,
+			unsigned long step)
+{
+	unsigned long base = bdata->node_min_pfn;
+
+	/*
+	 * Align the index with respect to the node start so that the
+	 * combination of both satisfies the requested alignment.
+	 */
+
+	return ALIGN(base + idx, step) - base;
+}
+
+static unsigned long align_off(struct bootmem_data *bdata, unsigned long off,
+			unsigned long align)
+{
+	unsigned long base = PFN_PHYS(bdata->node_min_pfn);
+
+	/* Same as align_idx for byte offsets */
+
+	return ALIGN(base + off, align) - base;
+}
+
 static void * __init alloc_bootmem_core(struct bootmem_data *bdata,
 				unsigned long size, unsigned long align,
 				unsigned long goal, unsigned long limit)
@@ -441,7 +464,7 @@ static void * __init alloc_bootmem_core(struct bootmem_data *bdata,
 	else
 		start = ALIGN(min, step);
 
-	sidx = start - bdata->node_min_pfn;;
+	sidx = start - bdata->node_min_pfn;
 	midx = max - bdata->node_min_pfn;
 
 	if (bdata->hint_idx > sidx) {
@@ -450,7 +473,7 @@ static void * __init alloc_bootmem_core(struct bootmem_data *bdata,
 		 * catch the fallback below.
 		 */
 		fallback = sidx + 1;
-		sidx = ALIGN(bdata->hint_idx, step);
+		sidx = align_idx(bdata, bdata->hint_idx, step);
 	}
 
 	while (1) {
@@ -459,7 +482,7 @@ static void * __init alloc_bootmem_core(struct bootmem_data *bdata,
 		unsigned long eidx, i, start_off, end_off;
 find_block:
 		sidx = find_next_zero_bit(bdata->node_bootmem_map, midx, sidx);
-		sidx = ALIGN(sidx, step);
+		sidx = align_idx(bdata, sidx, step);
 		eidx = sidx + PFN_UP(size);
 
 		if (sidx >= midx || eidx > midx)
@@ -467,15 +490,15 @@ find_block:
 
 		for (i = sidx; i < eidx; i++)
 			if (test_bit(i, bdata->node_bootmem_map)) {
-				sidx = ALIGN(i, step);
+				sidx = align_idx(bdata, i, step);
 				if (sidx == i)
 					sidx += step;
 				goto find_block;
 			}
 
-		if (bdata->last_end_off &&
+		if (bdata->last_end_off & (PAGE_SIZE - 1) &&
 				PFN_DOWN(bdata->last_end_off) + 1 == sidx)
-			start_off = ALIGN(bdata->last_end_off, align);
+			start_off = align_off(bdata, bdata->last_end_off, align);
 		else
 			start_off = PFN_PHYS(sidx);
 
@@ -499,7 +522,7 @@ find_block:
 	}
 
 	if (fallback) {
-		sidx = ALIGN(fallback - 1, step);
+		sidx = align_idx(bdata, fallback - 1, step);
 		fallback = 0;
 		goto find_block;
 	}
diff --git a/mm/filemap.c b/mm/filemap.c
index 7675b91f4f63..876bc595d0f8 100644
--- a/mm/filemap.c
+++ b/mm/filemap.c
@@ -109,13 +109,13 @@
 /*
  * Remove a page from the page cache and free it. Caller has to make
  * sure the page is locked and that nobody else uses it - or that usage
- * is safe.  The caller must hold a write_lock on the mapping's tree_lock.
+ * is safe.  The caller must hold the mapping's tree_lock.
  */
 void __remove_from_page_cache(struct page *page)
 {
 	struct address_space *mapping = page->mapping;
 
-	mem_cgroup_uncharge_page(page);
+	mem_cgroup_uncharge_cache_page(page);
 	radix_tree_delete(&mapping->page_tree, page->index);
 	page->mapping = NULL;
 	mapping->nrpages--;
@@ -141,9 +141,9 @@ void remove_from_page_cache(struct page *page)
 
 	BUG_ON(!PageLocked(page));
 
-	write_lock_irq(&mapping->tree_lock);
+	spin_lock_irq(&mapping->tree_lock);
 	__remove_from_page_cache(page);
-	write_unlock_irq(&mapping->tree_lock);
+	spin_unlock_irq(&mapping->tree_lock);
 }
 
 static int sync_page(void *word)
@@ -442,48 +442,52 @@ int filemap_write_and_wait_range(struct address_space *mapping,
 }
 
 /**
- * add_to_page_cache - add newly allocated pagecache pages
+ * add_to_page_cache_locked - add a locked page to the pagecache
  * @page:	page to add
  * @mapping:	the page's address_space
  * @offset:	page index
  * @gfp_mask:	page allocation mode
  *
- * This function is used to add newly allocated pagecache pages;
- * the page is new, so we can just run SetPageLocked() against it.
- * The other page state flags were set by rmqueue().
- *
+ * This function is used to add a page to the pagecache. It must be locked.
  * This function does not add the page to the LRU.  The caller must do that.
  */
-int add_to_page_cache(struct page *page, struct address_space *mapping,
+int add_to_page_cache_locked(struct page *page, struct address_space *mapping,
 		pgoff_t offset, gfp_t gfp_mask)
 {
-	int error = mem_cgroup_cache_charge(page, current->mm,
+	int error;
+
+	VM_BUG_ON(!PageLocked(page));
+
+	error = mem_cgroup_cache_charge(page, current->mm,
 					gfp_mask & ~__GFP_HIGHMEM);
 	if (error)
 		goto out;
 
 	error = radix_tree_preload(gfp_mask & ~__GFP_HIGHMEM);
 	if (error == 0) {
-		write_lock_irq(&mapping->tree_lock);
+		page_cache_get(page);
+		page->mapping = mapping;
+		page->index = offset;
+
+		spin_lock_irq(&mapping->tree_lock);
 		error = radix_tree_insert(&mapping->page_tree, offset, page);
-		if (!error) {
-			page_cache_get(page);
-			SetPageLocked(page);
-			page->mapping = mapping;
-			page->index = offset;
+		if (likely(!error)) {
 			mapping->nrpages++;
 			__inc_zone_page_state(page, NR_FILE_PAGES);
-		} else
-			mem_cgroup_uncharge_page(page);
+		} else {
+			page->mapping = NULL;
+			mem_cgroup_uncharge_cache_page(page);
+			page_cache_release(page);
+		}
 
-		write_unlock_irq(&mapping->tree_lock);
+		spin_unlock_irq(&mapping->tree_lock);
 		radix_tree_preload_end();
 	} else
-		mem_cgroup_uncharge_page(page);
+		mem_cgroup_uncharge_cache_page(page);
 out:
 	return error;
 }
-EXPORT_SYMBOL(add_to_page_cache);
+EXPORT_SYMBOL(add_to_page_cache_locked);
 
 int add_to_page_cache_lru(struct page *page, struct address_space *mapping,
 				pgoff_t offset, gfp_t gfp_mask)
@@ -554,14 +558,14 @@ EXPORT_SYMBOL(wait_on_page_bit);
  * But that's OK - sleepers in wait_on_page_writeback() just go back to sleep.
  *
  * The first mb is necessary to safely close the critical section opened by the
- * TestSetPageLocked(), the second mb is necessary to enforce ordering between
- * the clear_bit and the read of the waitqueue (to avoid SMP races with a
- * parallel wait_on_page_locked()).
+ * test_and_set_bit() to lock the page; the second mb is necessary to enforce
+ * ordering between the clear_bit and the read of the waitqueue (to avoid SMP
+ * races with a parallel wait_on_page_locked()).
  */
 void unlock_page(struct page *page)
 {
 	smp_mb__before_clear_bit();
-	if (!TestClearPageLocked(page))
+	if (!test_and_clear_bit(PG_locked, &page->flags))
 		BUG();
 	smp_mb__after_clear_bit(); 
 	wake_up_page(page, PG_locked);
@@ -633,15 +637,35 @@ void __lock_page_nosync(struct page *page)
  * Is there a pagecache struct page at the given (mapping, offset) tuple?
  * If yes, increment its refcount and return it; if no, return NULL.
  */
-struct page * find_get_page(struct address_space *mapping, pgoff_t offset)
+struct page *find_get_page(struct address_space *mapping, pgoff_t offset)
 {
+	void **pagep;
 	struct page *page;
 
-	read_lock_irq(&mapping->tree_lock);
-	page = radix_tree_lookup(&mapping->page_tree, offset);
-	if (page)
-		page_cache_get(page);
-	read_unlock_irq(&mapping->tree_lock);
+	rcu_read_lock();
+repeat:
+	page = NULL;
+	pagep = radix_tree_lookup_slot(&mapping->page_tree, offset);
+	if (pagep) {
+		page = radix_tree_deref_slot(pagep);
+		if (unlikely(!page || page == RADIX_TREE_RETRY))
+			goto repeat;
+
+		if (!page_cache_get_speculative(page))
+			goto repeat;
+
+		/*
+		 * Has the page moved?
+		 * This is part of the lockless pagecache protocol. See
+		 * include/linux/pagemap.h for details.
+		 */
+		if (unlikely(page != *pagep)) {
+			page_cache_release(page);
+			goto repeat;
+		}
+	}
+	rcu_read_unlock();
+
 	return page;
 }
 EXPORT_SYMBOL(find_get_page);
@@ -656,32 +680,22 @@ EXPORT_SYMBOL(find_get_page);
  *
  * Returns zero if the page was not present. find_lock_page() may sleep.
  */
-struct page *find_lock_page(struct address_space *mapping,
-				pgoff_t offset)
+struct page *find_lock_page(struct address_space *mapping, pgoff_t offset)
 {
 	struct page *page;
 
 repeat:
-	read_lock_irq(&mapping->tree_lock);
-	page = radix_tree_lookup(&mapping->page_tree, offset);
+	page = find_get_page(mapping, offset);
 	if (page) {
-		page_cache_get(page);
-		if (TestSetPageLocked(page)) {
-			read_unlock_irq(&mapping->tree_lock);
-			__lock_page(page);
-
-			/* Has the page been truncated while we slept? */
-			if (unlikely(page->mapping != mapping)) {
-				unlock_page(page);
-				page_cache_release(page);
-				goto repeat;
-			}
-			VM_BUG_ON(page->index != offset);
-			goto out;
+		lock_page(page);
+		/* Has the page been truncated? */
+		if (unlikely(page->mapping != mapping)) {
+			unlock_page(page);
+			page_cache_release(page);
+			goto repeat;
 		}
+		VM_BUG_ON(page->index != offset);
 	}
-	read_unlock_irq(&mapping->tree_lock);
-out:
 	return page;
 }
 EXPORT_SYMBOL(find_lock_page);
@@ -747,13 +761,39 @@ unsigned find_get_pages(struct address_space *mapping, pgoff_t start,
 {
 	unsigned int i;
 	unsigned int ret;
+	unsigned int nr_found;
+
+	rcu_read_lock();
+restart:
+	nr_found = radix_tree_gang_lookup_slot(&mapping->page_tree,
+				(void ***)pages, start, nr_pages);
+	ret = 0;
+	for (i = 0; i < nr_found; i++) {
+		struct page *page;
+repeat:
+		page = radix_tree_deref_slot((void **)pages[i]);
+		if (unlikely(!page))
+			continue;
+		/*
+		 * this can only trigger if nr_found == 1, making livelock
+		 * a non issue.
+		 */
+		if (unlikely(page == RADIX_TREE_RETRY))
+			goto restart;
+
+		if (!page_cache_get_speculative(page))
+			goto repeat;
+
+		/* Has the page moved? */
+		if (unlikely(page != *((void **)pages[i]))) {
+			page_cache_release(page);
+			goto repeat;
+		}
 
-	read_lock_irq(&mapping->tree_lock);
-	ret = radix_tree_gang_lookup(&mapping->page_tree,
-				(void **)pages, start, nr_pages);
-	for (i = 0; i < ret; i++)
-		page_cache_get(pages[i]);
-	read_unlock_irq(&mapping->tree_lock);
+		pages[ret] = page;
+		ret++;
+	}
+	rcu_read_unlock();
 	return ret;
 }
 
@@ -774,19 +814,44 @@ unsigned find_get_pages_contig(struct address_space *mapping, pgoff_t index,
 {
 	unsigned int i;
 	unsigned int ret;
+	unsigned int nr_found;
+
+	rcu_read_lock();
+restart:
+	nr_found = radix_tree_gang_lookup_slot(&mapping->page_tree,
+				(void ***)pages, index, nr_pages);
+	ret = 0;
+	for (i = 0; i < nr_found; i++) {
+		struct page *page;
+repeat:
+		page = radix_tree_deref_slot((void **)pages[i]);
+		if (unlikely(!page))
+			continue;
+		/*
+		 * this can only trigger if nr_found == 1, making livelock
+		 * a non issue.
+		 */
+		if (unlikely(page == RADIX_TREE_RETRY))
+			goto restart;
 
-	read_lock_irq(&mapping->tree_lock);
-	ret = radix_tree_gang_lookup(&mapping->page_tree,
-				(void **)pages, index, nr_pages);
-	for (i = 0; i < ret; i++) {
-		if (pages[i]->mapping == NULL || pages[i]->index != index)
+		if (page->mapping == NULL || page->index != index)
 			break;
 
-		page_cache_get(pages[i]);
+		if (!page_cache_get_speculative(page))
+			goto repeat;
+
+		/* Has the page moved? */
+		if (unlikely(page != *((void **)pages[i]))) {
+			page_cache_release(page);
+			goto repeat;
+		}
+
+		pages[ret] = page;
+		ret++;
 		index++;
 	}
-	read_unlock_irq(&mapping->tree_lock);
-	return i;
+	rcu_read_unlock();
+	return ret;
 }
 EXPORT_SYMBOL(find_get_pages_contig);
 
@@ -806,15 +871,43 @@ unsigned find_get_pages_tag(struct address_space *mapping, pgoff_t *index,
 {
 	unsigned int i;
 	unsigned int ret;
+	unsigned int nr_found;
+
+	rcu_read_lock();
+restart:
+	nr_found = radix_tree_gang_lookup_tag_slot(&mapping->page_tree,
+				(void ***)pages, *index, nr_pages, tag);
+	ret = 0;
+	for (i = 0; i < nr_found; i++) {
+		struct page *page;
+repeat:
+		page = radix_tree_deref_slot((void **)pages[i]);
+		if (unlikely(!page))
+			continue;
+		/*
+		 * this can only trigger if nr_found == 1, making livelock
+		 * a non issue.
+		 */
+		if (unlikely(page == RADIX_TREE_RETRY))
+			goto restart;
+
+		if (!page_cache_get_speculative(page))
+			goto repeat;
+
+		/* Has the page moved? */
+		if (unlikely(page != *((void **)pages[i]))) {
+			page_cache_release(page);
+			goto repeat;
+		}
+
+		pages[ret] = page;
+		ret++;
+	}
+	rcu_read_unlock();
 
-	read_lock_irq(&mapping->tree_lock);
-	ret = radix_tree_gang_lookup_tag(&mapping->page_tree,
-				(void **)pages, *index, nr_pages, tag);
-	for (i = 0; i < ret; i++)
-		page_cache_get(pages[i]);
 	if (ret)
 		*index = pages[ret - 1]->index + 1;
-	read_unlock_irq(&mapping->tree_lock);
+
 	return ret;
 }
 EXPORT_SYMBOL(find_get_pages_tag);
@@ -838,7 +931,7 @@ grab_cache_page_nowait(struct address_space *mapping, pgoff_t index)
 	struct page *page = find_get_page(mapping, index);
 
 	if (page) {
-		if (!TestSetPageLocked(page))
+		if (trylock_page(page))
 			return page;
 		page_cache_release(page);
 		return NULL;
@@ -930,8 +1023,17 @@ find_page:
 					ra, filp, page,
 					index, last_index - index);
 		}
-		if (!PageUptodate(page))
-			goto page_not_up_to_date;
+		if (!PageUptodate(page)) {
+			if (inode->i_blkbits == PAGE_CACHE_SHIFT ||
+					!mapping->a_ops->is_partially_uptodate)
+				goto page_not_up_to_date;
+			if (!trylock_page(page))
+				goto page_not_up_to_date;
+			if (!mapping->a_ops->is_partially_uptodate(page,
+								desc, offset))
+				goto page_not_up_to_date_locked;
+			unlock_page(page);
+		}
 page_ok:
 		/*
 		 * i_size must be checked after we know the page is Uptodate.
@@ -1001,6 +1103,7 @@ page_not_up_to_date:
 		if (lock_page_killable(page))
 			goto readpage_eio;
 
+page_not_up_to_date_locked:
 		/* Did it get truncated before we got the lock? */
 		if (!page->mapping) {
 			unlock_page(page);
@@ -1665,8 +1768,9 @@ static int __remove_suid(struct dentry *dentry, int kill)
 	return notify_change(dentry, &newattrs);
 }
 
-int remove_suid(struct dentry *dentry)
+int file_remove_suid(struct file *file)
 {
+	struct dentry *dentry = file->f_path.dentry;
 	int killsuid = should_remove_suid(dentry);
 	int killpriv = security_inode_need_killpriv(dentry);
 	int error = 0;
@@ -1680,7 +1784,7 @@ int remove_suid(struct dentry *dentry)
 
 	return error;
 }
-EXPORT_SYMBOL(remove_suid);
+EXPORT_SYMBOL(file_remove_suid);
 
 static size_t __iovec_copy_from_user_inatomic(char *vaddr,
 			const struct iovec *iov, size_t base, size_t bytes)
@@ -1775,7 +1879,7 @@ void iov_iter_advance(struct iov_iter *i, size_t bytes)
 		 * The !iov->iov_len check ensures we skip over unlikely
 		 * zero-length segments (without overruning the iovec).
 		 */
-		while (bytes || unlikely(!iov->iov_len && i->count)) {
+		while (bytes || unlikely(i->count && !iov->iov_len)) {
 			int copy;
 
 			copy = min(bytes, iov->iov_len - base);
@@ -2025,13 +2129,20 @@ generic_file_direct_write(struct kiocb *iocb, const struct iovec *iov,
 	 * After a write we want buffered reads to be sure to go to disk to get
 	 * the new data.  We invalidate clean cached page from the region we're
 	 * about to write.  We do this *before* the write so that we can return
-	 * -EIO without clobbering -EIOCBQUEUED from ->direct_IO().
+	 * without clobbering -EIOCBQUEUED from ->direct_IO().
 	 */
 	if (mapping->nrpages) {
 		written = invalidate_inode_pages2_range(mapping,
 					pos >> PAGE_CACHE_SHIFT, end);
-		if (written)
+		/*
+		 * If a page can not be invalidated, return 0 to fall back
+		 * to buffered write.
+		 */
+		if (written) {
+			if (written == -EBUSY)
+				return 0;
 			goto out;
+		}
 	}
 
 	written = mapping->a_ops->direct_IO(WRITE, iocb, iov, pos, *nr_segs);
@@ -2436,7 +2547,7 @@ __generic_file_aio_write_nolock(struct kiocb *iocb, const struct iovec *iov,
 	if (count == 0)
 		goto out;
 
-	err = remove_suid(file->f_path.dentry);
+	err = file_remove_suid(file);
 	if (err)
 		goto out;
 
@@ -2563,9 +2674,8 @@ EXPORT_SYMBOL(generic_file_aio_write);
  * Otherwise return zero.
  *
  * The @gfp_mask argument specifies whether I/O may be performed to release
- * this page (__GFP_IO), and whether the call may block (__GFP_WAIT).
+ * this page (__GFP_IO), and whether the call may block (__GFP_WAIT & __GFP_FS).
  *
- * NOTE: @gfp_mask may go away, and this function may become non-blocking.
  */
 int try_to_release_page(struct page *page, gfp_t gfp_mask)
 {
diff --git a/mm/filemap_xip.c b/mm/filemap_xip.c
index 3e744abcce9d..b5167dfb2f2d 100644
--- a/mm/filemap_xip.c
+++ b/mm/filemap_xip.c
@@ -13,7 +13,10 @@
 #include <linux/module.h>
 #include <linux/uio.h>
 #include <linux/rmap.h>
+#include <linux/mmu_notifier.h>
 #include <linux/sched.h>
+#include <linux/seqlock.h>
+#include <linux/mutex.h>
 #include <asm/tlbflush.h>
 #include <asm/io.h>
 
@@ -21,22 +24,18 @@
  * We do use our own empty page to avoid interference with other users
  * of ZERO_PAGE(), such as /dev/zero
  */
+static DEFINE_MUTEX(xip_sparse_mutex);
+static seqcount_t xip_sparse_seq = SEQCNT_ZERO;
 static struct page *__xip_sparse_page;
 
+/* called under xip_sparse_mutex */
 static struct page *xip_sparse_page(void)
 {
 	if (!__xip_sparse_page) {
 		struct page *page = alloc_page(GFP_HIGHUSER | __GFP_ZERO);
 
-		if (page) {
-			static DEFINE_SPINLOCK(xip_alloc_lock);
-			spin_lock(&xip_alloc_lock);
-			if (!__xip_sparse_page)
-				__xip_sparse_page = page;
-			else
-				__free_page(page);
-			spin_unlock(&xip_alloc_lock);
-		}
+		if (page)
+			__xip_sparse_page = page;
 	}
 	return __xip_sparse_page;
 }
@@ -173,22 +172,27 @@ __xip_unmap (struct address_space * mapping,
 	pte_t pteval;
 	spinlock_t *ptl;
 	struct page *page;
+	unsigned count;
+	int locked = 0;
+
+	count = read_seqcount_begin(&xip_sparse_seq);
 
 	page = __xip_sparse_page;
 	if (!page)
 		return;
 
+retry:
 	spin_lock(&mapping->i_mmap_lock);
 	vma_prio_tree_foreach(vma, &iter, &mapping->i_mmap, pgoff, pgoff) {
 		mm = vma->vm_mm;
 		address = vma->vm_start +
 			((pgoff - vma->vm_pgoff) << PAGE_SHIFT);
 		BUG_ON(address < vma->vm_start || address >= vma->vm_end);
-		pte = page_check_address(page, mm, address, &ptl);
+		pte = page_check_address(page, mm, address, &ptl, 1);
 		if (pte) {
 			/* Nuke the page table entry. */
 			flush_cache_page(vma, address, pte_pfn(*pte));
-			pteval = ptep_clear_flush(vma, address, pte);
+			pteval = ptep_clear_flush_notify(vma, address, pte);
 			page_remove_rmap(page, vma);
 			dec_mm_counter(mm, file_rss);
 			BUG_ON(pte_dirty(pteval));
@@ -197,6 +201,14 @@ __xip_unmap (struct address_space * mapping,
 		}
 	}
 	spin_unlock(&mapping->i_mmap_lock);
+
+	if (locked) {
+		mutex_unlock(&xip_sparse_mutex);
+	} else if (read_seqcount_retry(&xip_sparse_seq, count)) {
+		mutex_lock(&xip_sparse_mutex);
+		locked = 1;
+		goto retry;
+	}
 }
 
 /*
@@ -217,7 +229,7 @@ static int xip_file_fault(struct vm_area_struct *vma, struct vm_fault *vmf)
 	int error;
 
 	/* XXX: are VM_FAULT_ codes OK? */
-
+again:
 	size = (i_size_read(inode) + PAGE_CACHE_SIZE - 1) >> PAGE_CACHE_SHIFT;
 	if (vmf->pgoff >= size)
 		return VM_FAULT_SIGBUS;
@@ -236,8 +248,10 @@ static int xip_file_fault(struct vm_area_struct *vma, struct vm_fault *vmf)
 		int err;
 
 		/* maybe shared writable, allocate new block */
+		mutex_lock(&xip_sparse_mutex);
 		error = mapping->a_ops->get_xip_mem(mapping, vmf->pgoff, 1,
 							&xip_mem, &xip_pfn);
+		mutex_unlock(&xip_sparse_mutex);
 		if (error)
 			return VM_FAULT_SIGBUS;
 		/* unmap sparse mappings at pgoff from all other vmas */
@@ -251,14 +265,34 @@ found:
 		BUG_ON(err);
 		return VM_FAULT_NOPAGE;
 	} else {
+		int err, ret = VM_FAULT_OOM;
+
+		mutex_lock(&xip_sparse_mutex);
+		write_seqcount_begin(&xip_sparse_seq);
+		error = mapping->a_ops->get_xip_mem(mapping, vmf->pgoff, 0,
+							&xip_mem, &xip_pfn);
+		if (unlikely(!error)) {
+			write_seqcount_end(&xip_sparse_seq);
+			mutex_unlock(&xip_sparse_mutex);
+			goto again;
+		}
+		if (error != -ENODATA)
+			goto out;
 		/* not shared and writable, use xip_sparse_page() */
 		page = xip_sparse_page();
 		if (!page)
-			return VM_FAULT_OOM;
+			goto out;
+		err = vm_insert_page(vma, (unsigned long)vmf->virtual_address,
+							page);
+		if (err == -ENOMEM)
+			goto out;
 
-		page_cache_get(page);
-		vmf->page = page;
-		return 0;
+		ret = VM_FAULT_NOPAGE;
+out:
+		write_seqcount_end(&xip_sparse_seq);
+		mutex_unlock(&xip_sparse_mutex);
+
+		return ret;
 	}
 }
 
@@ -307,8 +341,10 @@ __xip_file_write(struct file *filp, const char __user *buf,
 						&xip_mem, &xip_pfn);
 		if (status == -ENODATA) {
 			/* we allocate a new page unmap it */
+			mutex_lock(&xip_sparse_mutex);
 			status = a_ops->get_xip_mem(mapping, index, 1,
 							&xip_mem, &xip_pfn);
+			mutex_unlock(&xip_sparse_mutex);
 			if (!status)
 				/* unmap page at pgoff from all other vmas */
 				__xip_unmap(mapping, index);
@@ -380,7 +416,7 @@ xip_file_write(struct file *filp, const char __user *buf, size_t len,
 	if (count == 0)
 		goto out_backing;
 
-	ret = remove_suid(filp->f_path.dentry);
+	ret = file_remove_suid(filp);
 	if (ret)
 		goto out_backing;
 
diff --git a/mm/fremap.c b/mm/fremap.c
index 07a9c82ce1a3..7881638e4a12 100644
--- a/mm/fremap.c
+++ b/mm/fremap.c
@@ -15,6 +15,7 @@
 #include <linux/rmap.h>
 #include <linux/module.h>
 #include <linux/syscalls.h>
+#include <linux/mmu_notifier.h>
 
 #include <asm/mmu_context.h>
 #include <asm/cacheflush.h>
@@ -214,7 +215,9 @@ asmlinkage long sys_remap_file_pages(unsigned long start, unsigned long size,
 		spin_unlock(&mapping->i_mmap_lock);
 	}
 
+	mmu_notifier_invalidate_range_start(mm, start, start + size);
 	err = populate_range(mm, vma, start, size, pgoff);
+	mmu_notifier_invalidate_range_end(mm, start, start + size);
 	if (!err && !(flags & MAP_NONBLOCK)) {
 		if (unlikely(has_write_lock)) {
 			downgrade_write(&mm->mmap_sem);
diff --git a/mm/hugetlb.c b/mm/hugetlb.c
index 41341c414194..67a71191136e 100644
--- a/mm/hugetlb.c
+++ b/mm/hugetlb.c
@@ -9,6 +9,7 @@
 #include <linux/mm.h>
 #include <linux/sysctl.h>
 #include <linux/highmem.h>
+#include <linux/mmu_notifier.h>
 #include <linux/nodemask.h>
 #include <linux/pagemap.h>
 #include <linux/mempolicy.h>
@@ -19,6 +20,7 @@
 
 #include <asm/page.h>
 #include <asm/pgtable.h>
+#include <asm/io.h>
 
 #include <linux/hugetlb.h>
 #include "internal.h"
@@ -563,7 +565,7 @@ static struct page *alloc_fresh_huge_page_node(struct hstate *h, int nid)
 		huge_page_order(h));
 	if (page) {
 		if (arch_prepare_hugepage(page)) {
-			__free_pages(page, HUGETLB_PAGE_ORDER);
+			__free_pages(page, huge_page_order(h));
 			return NULL;
 		}
 		prep_new_huge_page(h, page, nid);
@@ -663,6 +665,11 @@ static struct page *alloc_buddy_huge_page(struct hstate *h,
 					__GFP_REPEAT|__GFP_NOWARN,
 					huge_page_order(h));
 
+	if (page && arch_prepare_hugepage(page)) {
+		__free_pages(page, huge_page_order(h));
+		return NULL;
+	}
+
 	spin_lock(&hugetlb_lock);
 	if (page) {
 		/*
@@ -1026,7 +1033,6 @@ static void __init report_hugepages(void)
 	}
 }
 
-#ifdef CONFIG_SYSCTL
 #ifdef CONFIG_HIGHMEM
 static void try_to_free_low(struct hstate *h, unsigned long count)
 {
@@ -1282,7 +1288,12 @@ module_exit(hugetlb_exit);
 
 static int __init hugetlb_init(void)
 {
-	BUILD_BUG_ON(HPAGE_SHIFT == 0);
+	/* Some platform decide whether they support huge pages at boot
+	 * time. On these, such as powerpc, HPAGE_SHIFT is set to 0 when
+	 * there is no such support
+	 */
+	if (HPAGE_SHIFT == 0)
+		return 0;
 
 	if (!size_to_hstate(default_hstate_size)) {
 		default_hstate_size = HPAGE_SIZE;
@@ -1386,6 +1397,7 @@ static unsigned int cpuset_mems_nr(unsigned int *array)
 	return nr;
 }
 
+#ifdef CONFIG_SYSCTL
 int hugetlb_sysctl_handler(struct ctl_table *table, int write,
 			   struct file *file, void __user *buffer,
 			   size_t *length, loff_t *ppos)
@@ -1672,6 +1684,7 @@ void __unmap_hugepage_range(struct vm_area_struct *vma, unsigned long start,
 	BUG_ON(start & ~huge_page_mask(h));
 	BUG_ON(end & ~huge_page_mask(h));
 
+	mmu_notifier_invalidate_range_start(mm, start, end);
 	spin_lock(&mm->page_table_lock);
 	for (address = start; address < end; address += sz) {
 		ptep = huge_pte_offset(mm, address);
@@ -1713,6 +1726,7 @@ void __unmap_hugepage_range(struct vm_area_struct *vma, unsigned long start,
 	}
 	spin_unlock(&mm->page_table_lock);
 	flush_tlb_range(vma, start, end);
+	mmu_notifier_invalidate_range_end(mm, start, end);
 	list_for_each_entry_safe(page, tmp, &page_list, lru) {
 		list_del(&page->lru);
 		put_page(page);
@@ -1928,6 +1942,18 @@ retry:
 			lock_page(page);
 	}
 
+	/*
+	 * If we are going to COW a private mapping later, we examine the
+	 * pending reservations for this page now. This will ensure that
+	 * any allocations necessary to record that reservation occur outside
+	 * the spinlock.
+	 */
+	if (write_access && !(vma->vm_flags & VM_SHARED))
+		if (vma_needs_reservation(h, vma, address) < 0) {
+			ret = VM_FAULT_OOM;
+			goto backout_unlocked;
+		}
+
 	spin_lock(&mm->page_table_lock);
 	size = i_size_read(mapping->host) >> huge_page_shift(h);
 	if (idx >= size)
@@ -1953,6 +1979,7 @@ out:
 
 backout:
 	spin_unlock(&mm->page_table_lock);
+backout_unlocked:
 	unlock_page(page);
 	put_page(page);
 	goto out;
@@ -1964,6 +1991,7 @@ int hugetlb_fault(struct mm_struct *mm, struct vm_area_struct *vma,
 	pte_t *ptep;
 	pte_t entry;
 	int ret;
+	struct page *pagecache_page = NULL;
 	static DEFINE_MUTEX(hugetlb_instantiation_mutex);
 	struct hstate *h = hstate_vma(vma);
 
@@ -1980,25 +2008,44 @@ int hugetlb_fault(struct mm_struct *mm, struct vm_area_struct *vma,
 	entry = huge_ptep_get(ptep);
 	if (huge_pte_none(entry)) {
 		ret = hugetlb_no_page(mm, vma, address, ptep, write_access);
-		mutex_unlock(&hugetlb_instantiation_mutex);
-		return ret;
+		goto out_unlock;
 	}
 
 	ret = 0;
 
+	/*
+	 * If we are going to COW the mapping later, we examine the pending
+	 * reservations for this page now. This will ensure that any
+	 * allocations necessary to record that reservation occur outside the
+	 * spinlock. For private mappings, we also lookup the pagecache
+	 * page now as it is used to determine if a reservation has been
+	 * consumed.
+	 */
+	if (write_access && !pte_write(entry)) {
+		if (vma_needs_reservation(h, vma, address) < 0) {
+			ret = VM_FAULT_OOM;
+			goto out_unlock;
+		}
+
+		if (!(vma->vm_flags & VM_SHARED))
+			pagecache_page = hugetlbfs_pagecache_page(h,
+								vma, address);
+	}
+
 	spin_lock(&mm->page_table_lock);
 	/* Check for a racing update before calling hugetlb_cow */
 	if (likely(pte_same(entry, huge_ptep_get(ptep))))
-		if (write_access && !pte_write(entry)) {
-			struct page *page;
-			page = hugetlbfs_pagecache_page(h, vma, address);
-			ret = hugetlb_cow(mm, vma, address, ptep, entry, page);
-			if (page) {
-				unlock_page(page);
-				put_page(page);
-			}
-		}
+		if (write_access && !pte_write(entry))
+			ret = hugetlb_cow(mm, vma, address, ptep, entry,
+							pagecache_page);
 	spin_unlock(&mm->page_table_lock);
+
+	if (pagecache_page) {
+		unlock_page(pagecache_page);
+		put_page(pagecache_page);
+	}
+
+out_unlock:
 	mutex_unlock(&hugetlb_instantiation_mutex);
 
 	return ret;
diff --git a/mm/madvise.c b/mm/madvise.c
index 23a0ec3e0ea0..f9349c18a1b5 100644
--- a/mm/madvise.c
+++ b/mm/madvise.c
@@ -132,10 +132,10 @@ static long madvise_willneed(struct vm_area_struct * vma,
  * Application no longer needs these pages.  If the pages are dirty,
  * it's OK to just throw them away.  The app will be more careful about
  * data it wants to keep.  Be sure to free swap resources too.  The
- * zap_page_range call sets things up for refill_inactive to actually free
+ * zap_page_range call sets things up for shrink_active_list to actually free
  * these pages later if no one else has touched them in the meantime,
  * although we could add these pages to a global reuse list for
- * refill_inactive to pick up before reclaiming other pages.
+ * shrink_active_list to pick up before reclaiming other pages.
  *
  * NB: This interface discards data rather than pushes it out to swap,
  * as some implementations do.  This has performance implications for
diff --git a/mm/memcontrol.c b/mm/memcontrol.c
index e46451e1d9b7..0f1f7a7374ba 100644
--- a/mm/memcontrol.c
+++ b/mm/memcontrol.c
@@ -35,9 +35,9 @@
 
 #include <asm/uaccess.h>
 
-struct cgroup_subsys mem_cgroup_subsys;
-static const int MEM_CGROUP_RECLAIM_RETRIES = 5;
-static struct kmem_cache *page_cgroup_cache;
+struct cgroup_subsys mem_cgroup_subsys __read_mostly;
+static struct kmem_cache *page_cgroup_cache __read_mostly;
+#define MEM_CGROUP_RECLAIM_RETRIES	5
 
 /*
  * Statistics for memory cgroup.
@@ -166,7 +166,6 @@ struct page_cgroup {
 	struct list_head lru;		/* per cgroup LRU list */
 	struct page *page;
 	struct mem_cgroup *mem_cgroup;
-	int ref_cnt;			/* cached, mapped, migrating */
 	int flags;
 };
 #define PAGE_CGROUP_FLAG_CACHE	(0x1)	/* charged as cache */
@@ -185,6 +184,7 @@ static enum zone_type page_cgroup_zid(struct page_cgroup *pc)
 enum charge_type {
 	MEM_CGROUP_CHARGE_TYPE_CACHE = 0,
 	MEM_CGROUP_CHARGE_TYPE_MAPPED,
+	MEM_CGROUP_CHARGE_TYPE_FORCE,	/* used by force_empty */
 };
 
 /*
@@ -296,7 +296,7 @@ static void __mem_cgroup_remove_list(struct mem_cgroup_per_zone *mz,
 		MEM_CGROUP_ZSTAT(mz, MEM_CGROUP_ZSTAT_INACTIVE) -= 1;
 
 	mem_cgroup_charge_statistics(pc->mem_cgroup, pc->flags, false);
-	list_del_init(&pc->lru);
+	list_del(&pc->lru);
 }
 
 static void __mem_cgroup_add_list(struct mem_cgroup_per_zone *mz,
@@ -354,6 +354,9 @@ void mem_cgroup_move_lists(struct page *page, bool active)
 	struct mem_cgroup_per_zone *mz;
 	unsigned long flags;
 
+	if (mem_cgroup_subsys.disabled)
+		return;
+
 	/*
 	 * We cannot lock_page_cgroup while holding zone's lru_lock,
 	 * because other holders of lock_page_cgroup can be interrupted
@@ -524,7 +527,8 @@ unsigned long mem_cgroup_isolate_pages(unsigned long nr_to_scan,
  * < 0 if the cgroup is over its limit
  */
 static int mem_cgroup_charge_common(struct page *page, struct mm_struct *mm,
-				gfp_t gfp_mask, enum charge_type ctype)
+				gfp_t gfp_mask, enum charge_type ctype,
+				struct mem_cgroup *memcg)
 {
 	struct mem_cgroup *mem;
 	struct page_cgroup *pc;
@@ -532,35 +536,8 @@ static int mem_cgroup_charge_common(struct page *page, struct mm_struct *mm,
 	unsigned long nr_retries = MEM_CGROUP_RECLAIM_RETRIES;
 	struct mem_cgroup_per_zone *mz;
 
-	if (mem_cgroup_subsys.disabled)
-		return 0;
-
-	/*
-	 * Should page_cgroup's go to their own slab?
-	 * One could optimize the performance of the charging routine
-	 * by saving a bit in the page_flags and using it as a lock
-	 * to see if the cgroup page already has a page_cgroup associated
-	 * with it
-	 */
-retry:
-	lock_page_cgroup(page);
-	pc = page_get_page_cgroup(page);
-	/*
-	 * The page_cgroup exists and
-	 * the page has already been accounted.
-	 */
-	if (pc) {
-		VM_BUG_ON(pc->page != page);
-		VM_BUG_ON(pc->ref_cnt <= 0);
-
-		pc->ref_cnt++;
-		unlock_page_cgroup(page);
-		goto done;
-	}
-	unlock_page_cgroup(page);
-
-	pc = kmem_cache_zalloc(page_cgroup_cache, gfp_mask);
-	if (pc == NULL)
+	pc = kmem_cache_alloc(page_cgroup_cache, gfp_mask);
+	if (unlikely(pc == NULL))
 		goto err;
 
 	/*
@@ -569,16 +546,18 @@ retry:
 	 * thread group leader migrates. It's possible that mm is not
 	 * set, if so charge the init_mm (happens for pagecache usage).
 	 */
-	if (!mm)
-		mm = &init_mm;
-
-	rcu_read_lock();
-	mem = mem_cgroup_from_task(rcu_dereference(mm->owner));
-	/*
-	 * For every charge from the cgroup, increment reference count
-	 */
-	css_get(&mem->css);
-	rcu_read_unlock();
+	if (likely(!memcg)) {
+		rcu_read_lock();
+		mem = mem_cgroup_from_task(rcu_dereference(mm->owner));
+		/*
+		 * For every charge from the cgroup, increment reference count
+		 */
+		css_get(&mem->css);
+		rcu_read_unlock();
+	} else {
+		mem = memcg;
+		css_get(&memcg->css);
+	}
 
 	while (res_counter_charge(&mem->res, PAGE_SIZE)) {
 		if (!(gfp_mask & __GFP_WAIT))
@@ -603,25 +582,24 @@ retry:
 		}
 	}
 
-	pc->ref_cnt = 1;
 	pc->mem_cgroup = mem;
 	pc->page = page;
-	pc->flags = PAGE_CGROUP_FLAG_ACTIVE;
+	/*
+	 * If a page is accounted as a page cache, insert to inactive list.
+	 * If anon, insert to active list.
+	 */
 	if (ctype == MEM_CGROUP_CHARGE_TYPE_CACHE)
 		pc->flags = PAGE_CGROUP_FLAG_CACHE;
+	else
+		pc->flags = PAGE_CGROUP_FLAG_ACTIVE;
 
 	lock_page_cgroup(page);
-	if (page_get_page_cgroup(page)) {
+	if (unlikely(page_get_page_cgroup(page))) {
 		unlock_page_cgroup(page);
-		/*
-		 * Another charge has been added to this page already.
-		 * We take lock_page_cgroup(page) again and read
-		 * page->cgroup, increment refcnt.... just retry is OK.
-		 */
 		res_counter_uncharge(&mem->res, PAGE_SIZE);
 		css_put(&mem->css);
 		kmem_cache_free(page_cgroup_cache, pc);
-		goto retry;
+		goto done;
 	}
 	page_assign_page_cgroup(page, pc);
 
@@ -642,24 +620,65 @@ err:
 
 int mem_cgroup_charge(struct page *page, struct mm_struct *mm, gfp_t gfp_mask)
 {
+	if (mem_cgroup_subsys.disabled)
+		return 0;
+
+	/*
+	 * If already mapped, we don't have to account.
+	 * If page cache, page->mapping has address_space.
+	 * But page->mapping may have out-of-use anon_vma pointer,
+	 * detecit it by PageAnon() check. newly-mapped-anon's page->mapping
+	 * is NULL.
+  	 */
+	if (page_mapped(page) || (page->mapping && !PageAnon(page)))
+		return 0;
+	if (unlikely(!mm))
+		mm = &init_mm;
 	return mem_cgroup_charge_common(page, mm, gfp_mask,
-				MEM_CGROUP_CHARGE_TYPE_MAPPED);
+				MEM_CGROUP_CHARGE_TYPE_MAPPED, NULL);
 }
 
 int mem_cgroup_cache_charge(struct page *page, struct mm_struct *mm,
 				gfp_t gfp_mask)
 {
-	if (!mm)
+	if (mem_cgroup_subsys.disabled)
+		return 0;
+
+	/*
+	 * Corner case handling. This is called from add_to_page_cache()
+	 * in usual. But some FS (shmem) precharges this page before calling it
+	 * and call add_to_page_cache() with GFP_NOWAIT.
+	 *
+	 * For GFP_NOWAIT case, the page may be pre-charged before calling
+	 * add_to_page_cache(). (See shmem.c) check it here and avoid to call
+	 * charge twice. (It works but has to pay a bit larger cost.)
+	 */
+	if (!(gfp_mask & __GFP_WAIT)) {
+		struct page_cgroup *pc;
+
+		lock_page_cgroup(page);
+		pc = page_get_page_cgroup(page);
+		if (pc) {
+			VM_BUG_ON(pc->page != page);
+			VM_BUG_ON(!pc->mem_cgroup);
+			unlock_page_cgroup(page);
+			return 0;
+		}
+		unlock_page_cgroup(page);
+	}
+
+	if (unlikely(!mm))
 		mm = &init_mm;
+
 	return mem_cgroup_charge_common(page, mm, gfp_mask,
-				MEM_CGROUP_CHARGE_TYPE_CACHE);
+				MEM_CGROUP_CHARGE_TYPE_CACHE, NULL);
 }
 
 /*
- * Uncharging is always a welcome operation, we never complain, simply
- * uncharge.
+ * uncharge if !page_mapped(page)
  */
-void mem_cgroup_uncharge_page(struct page *page)
+static void
+__mem_cgroup_uncharge_common(struct page *page, enum charge_type ctype)
 {
 	struct page_cgroup *pc;
 	struct mem_cgroup *mem;
@@ -674,98 +693,153 @@ void mem_cgroup_uncharge_page(struct page *page)
 	 */
 	lock_page_cgroup(page);
 	pc = page_get_page_cgroup(page);
-	if (!pc)
+	if (unlikely(!pc))
 		goto unlock;
 
 	VM_BUG_ON(pc->page != page);
-	VM_BUG_ON(pc->ref_cnt <= 0);
 
-	if (--(pc->ref_cnt) == 0) {
-		mz = page_cgroup_zoneinfo(pc);
-		spin_lock_irqsave(&mz->lru_lock, flags);
-		__mem_cgroup_remove_list(mz, pc);
-		spin_unlock_irqrestore(&mz->lru_lock, flags);
+	if ((ctype == MEM_CGROUP_CHARGE_TYPE_MAPPED)
+	    && ((pc->flags & PAGE_CGROUP_FLAG_CACHE)
+		|| page_mapped(page)))
+		goto unlock;
 
-		page_assign_page_cgroup(page, NULL);
-		unlock_page_cgroup(page);
+	mz = page_cgroup_zoneinfo(pc);
+	spin_lock_irqsave(&mz->lru_lock, flags);
+	__mem_cgroup_remove_list(mz, pc);
+	spin_unlock_irqrestore(&mz->lru_lock, flags);
 
-		mem = pc->mem_cgroup;
-		res_counter_uncharge(&mem->res, PAGE_SIZE);
-		css_put(&mem->css);
+	page_assign_page_cgroup(page, NULL);
+	unlock_page_cgroup(page);
 
-		kmem_cache_free(page_cgroup_cache, pc);
-		return;
-	}
+	mem = pc->mem_cgroup;
+	res_counter_uncharge(&mem->res, PAGE_SIZE);
+	css_put(&mem->css);
 
+	kmem_cache_free(page_cgroup_cache, pc);
+	return;
 unlock:
 	unlock_page_cgroup(page);
 }
 
+void mem_cgroup_uncharge_page(struct page *page)
+{
+	__mem_cgroup_uncharge_common(page, MEM_CGROUP_CHARGE_TYPE_MAPPED);
+}
+
+void mem_cgroup_uncharge_cache_page(struct page *page)
+{
+	VM_BUG_ON(page_mapped(page));
+	__mem_cgroup_uncharge_common(page, MEM_CGROUP_CHARGE_TYPE_CACHE);
+}
+
 /*
- * Returns non-zero if a page (under migration) has valid page_cgroup member.
- * Refcnt of page_cgroup is incremented.
+ * Before starting migration, account against new page.
  */
-int mem_cgroup_prepare_migration(struct page *page)
+int mem_cgroup_prepare_migration(struct page *page, struct page *newpage)
 {
 	struct page_cgroup *pc;
+	struct mem_cgroup *mem = NULL;
+	enum charge_type ctype = MEM_CGROUP_CHARGE_TYPE_MAPPED;
+	int ret = 0;
 
 	if (mem_cgroup_subsys.disabled)
 		return 0;
 
 	lock_page_cgroup(page);
 	pc = page_get_page_cgroup(page);
-	if (pc)
-		pc->ref_cnt++;
+	if (pc) {
+		mem = pc->mem_cgroup;
+		css_get(&mem->css);
+		if (pc->flags & PAGE_CGROUP_FLAG_CACHE)
+			ctype = MEM_CGROUP_CHARGE_TYPE_CACHE;
+	}
 	unlock_page_cgroup(page);
-	return pc != NULL;
+	if (mem) {
+		ret = mem_cgroup_charge_common(newpage, NULL, GFP_KERNEL,
+			ctype, mem);
+		css_put(&mem->css);
+	}
+	return ret;
 }
 
-void mem_cgroup_end_migration(struct page *page)
+/* remove redundant charge if migration failed*/
+void mem_cgroup_end_migration(struct page *newpage)
 {
-	mem_cgroup_uncharge_page(page);
+	/*
+	 * At success, page->mapping is not NULL.
+	 * special rollback care is necessary when
+	 * 1. at migration failure. (newpage->mapping is cleared in this case)
+	 * 2. the newpage was moved but not remapped again because the task
+	 *    exits and the newpage is obsolete. In this case, the new page
+	 *    may be a swapcache. So, we just call mem_cgroup_uncharge_page()
+	 *    always for avoiding mess. The  page_cgroup will be removed if
+	 *    unnecessary. File cache pages is still on radix-tree. Don't
+	 *    care it.
+	 */
+	if (!newpage->mapping)
+		__mem_cgroup_uncharge_common(newpage,
+					 MEM_CGROUP_CHARGE_TYPE_FORCE);
+	else if (PageAnon(newpage))
+		mem_cgroup_uncharge_page(newpage);
 }
 
 /*
- * We know both *page* and *newpage* are now not-on-LRU and PG_locked.
- * And no race with uncharge() routines because page_cgroup for *page*
- * has extra one reference by mem_cgroup_prepare_migration.
+ * A call to try to shrink memory usage under specified resource controller.
+ * This is typically used for page reclaiming for shmem for reducing side
+ * effect of page allocation from shmem, which is used by some mem_cgroup.
  */
-void mem_cgroup_page_migration(struct page *page, struct page *newpage)
+int mem_cgroup_shrink_usage(struct mm_struct *mm, gfp_t gfp_mask)
 {
-	struct page_cgroup *pc;
-	struct mem_cgroup_per_zone *mz;
-	unsigned long flags;
+	struct mem_cgroup *mem;
+	int progress = 0;
+	int retry = MEM_CGROUP_RECLAIM_RETRIES;
 
-	lock_page_cgroup(page);
-	pc = page_get_page_cgroup(page);
-	if (!pc) {
-		unlock_page_cgroup(page);
-		return;
-	}
+	if (mem_cgroup_subsys.disabled)
+		return 0;
+	if (!mm)
+		return 0;
 
-	mz = page_cgroup_zoneinfo(pc);
-	spin_lock_irqsave(&mz->lru_lock, flags);
-	__mem_cgroup_remove_list(mz, pc);
-	spin_unlock_irqrestore(&mz->lru_lock, flags);
+	rcu_read_lock();
+	mem = mem_cgroup_from_task(rcu_dereference(mm->owner));
+	css_get(&mem->css);
+	rcu_read_unlock();
 
-	page_assign_page_cgroup(page, NULL);
-	unlock_page_cgroup(page);
+	do {
+		progress = try_to_free_mem_cgroup_pages(mem, gfp_mask);
+	} while (!progress && --retry);
 
-	pc->page = newpage;
-	lock_page_cgroup(newpage);
-	page_assign_page_cgroup(newpage, pc);
+	css_put(&mem->css);
+	if (!retry)
+		return -ENOMEM;
+	return 0;
+}
 
-	mz = page_cgroup_zoneinfo(pc);
-	spin_lock_irqsave(&mz->lru_lock, flags);
-	__mem_cgroup_add_list(mz, pc);
-	spin_unlock_irqrestore(&mz->lru_lock, flags);
+int mem_cgroup_resize_limit(struct mem_cgroup *memcg, unsigned long long val)
+{
+
+	int retry_count = MEM_CGROUP_RECLAIM_RETRIES;
+	int progress;
+	int ret = 0;
 
-	unlock_page_cgroup(newpage);
+	while (res_counter_set_limit(&memcg->res, val)) {
+		if (signal_pending(current)) {
+			ret = -EINTR;
+			break;
+		}
+		if (!retry_count) {
+			ret = -EBUSY;
+			break;
+		}
+		progress = try_to_free_mem_cgroup_pages(memcg, GFP_KERNEL);
+		if (!progress)
+			retry_count--;
+	}
+	return ret;
 }
 
+
 /*
  * This routine traverse page_cgroup in given list and drop them all.
- * This routine ignores page_cgroup->ref_cnt.
  * *And* this routine doesn't reclaim page itself, just removes page_cgroup.
  */
 #define FORCE_UNCHARGE_BATCH	(128)
@@ -790,12 +864,20 @@ static void mem_cgroup_force_empty_list(struct mem_cgroup *mem,
 		page = pc->page;
 		get_page(page);
 		spin_unlock_irqrestore(&mz->lru_lock, flags);
-		mem_cgroup_uncharge_page(page);
-		put_page(page);
-		if (--count <= 0) {
-			count = FORCE_UNCHARGE_BATCH;
+		/*
+		 * Check if this page is on LRU. !LRU page can be found
+		 * if it's under page migration.
+		 */
+		if (PageLRU(page)) {
+			__mem_cgroup_uncharge_common(page,
+					MEM_CGROUP_CHARGE_TYPE_FORCE);
+			put_page(page);
+			if (--count <= 0) {
+				count = FORCE_UNCHARGE_BATCH;
+				cond_resched();
+			}
+		} else
 			cond_resched();
-		}
 		spin_lock_irqsave(&mz->lru_lock, flags);
 	}
 	spin_unlock_irqrestore(&mz->lru_lock, flags);
@@ -810,9 +892,6 @@ static int mem_cgroup_force_empty(struct mem_cgroup *mem)
 	int ret = -EBUSY;
 	int node, zid;
 
-	if (mem_cgroup_subsys.disabled)
-		return 0;
-
 	css_get(&mem->css);
 	/*
 	 * page reclaim code (kswapd etc..) will move pages between
@@ -838,32 +917,34 @@ out:
 	return ret;
 }
 
-static int mem_cgroup_write_strategy(char *buf, unsigned long long *tmp)
-{
-	*tmp = memparse(buf, &buf);
-	if (*buf != '\0')
-		return -EINVAL;
-
-	/*
-	 * Round up the value to the closest page size
-	 */
-	*tmp = ((*tmp + PAGE_SIZE - 1) >> PAGE_SHIFT) << PAGE_SHIFT;
-	return 0;
-}
-
 static u64 mem_cgroup_read(struct cgroup *cont, struct cftype *cft)
 {
 	return res_counter_read_u64(&mem_cgroup_from_cont(cont)->res,
 				    cft->private);
 }
-
-static ssize_t mem_cgroup_write(struct cgroup *cont, struct cftype *cft,
-				struct file *file, const char __user *userbuf,
-				size_t nbytes, loff_t *ppos)
+/*
+ * The user of this function is...
+ * RES_LIMIT.
+ */
+static int mem_cgroup_write(struct cgroup *cont, struct cftype *cft,
+			    const char *buffer)
 {
-	return res_counter_write(&mem_cgroup_from_cont(cont)->res,
-				cft->private, userbuf, nbytes, ppos,
-				mem_cgroup_write_strategy);
+	struct mem_cgroup *memcg = mem_cgroup_from_cont(cont);
+	unsigned long long val;
+	int ret;
+
+	switch (cft->private) {
+	case RES_LIMIT:
+		/* This function does all necessary parse...reuse it */
+		ret = res_counter_memparse_write_strategy(buffer, &val);
+		if (!ret)
+			ret = mem_cgroup_resize_limit(memcg, val);
+		break;
+	default:
+		ret = -EINVAL; /* should be BUG() ? */
+		break;
+	}
+	return ret;
 }
 
 static int mem_cgroup_reset(struct cgroup *cont, unsigned int event)
@@ -940,7 +1021,7 @@ static struct cftype mem_cgroup_files[] = {
 	{
 		.name = "limit_in_bytes",
 		.private = RES_LIMIT,
-		.write = mem_cgroup_write,
+		.write_string = mem_cgroup_write,
 		.read_u64 = mem_cgroup_read,
 	},
 	{
@@ -1070,8 +1151,6 @@ static void mem_cgroup_destroy(struct cgroup_subsys *ss,
 static int mem_cgroup_populate(struct cgroup_subsys *ss,
 				struct cgroup *cont)
 {
-	if (mem_cgroup_subsys.disabled)
-		return 0;
 	return cgroup_add_files(cont, ss, mem_cgroup_files,
 					ARRAY_SIZE(mem_cgroup_files));
 }
@@ -1084,9 +1163,6 @@ static void mem_cgroup_move_task(struct cgroup_subsys *ss,
 	struct mm_struct *mm;
 	struct mem_cgroup *mem, *old_mem;
 
-	if (mem_cgroup_subsys.disabled)
-		return;
-
 	mm = get_task_mm(p);
 	if (mm == NULL)
 		return;
@@ -1094,9 +1170,6 @@ static void mem_cgroup_move_task(struct cgroup_subsys *ss,
 	mem = mem_cgroup_from_cont(cont);
 	old_mem = mem_cgroup_from_cont(old_cont);
 
-	if (mem == old_mem)
-		goto out;
-
 	/*
 	 * Only thread group leaders are allowed to migrate, the mm_struct is
 	 * in effect owned by the leader
diff --git a/mm/memory.c b/mm/memory.c
index 262e3eb6601a..1002f473f497 100644
--- a/mm/memory.c
+++ b/mm/memory.c
@@ -51,6 +51,7 @@
 #include <linux/init.h>
 #include <linux/writeback.h>
 #include <linux/memcontrol.h>
+#include <linux/mmu_notifier.h>
 
 #include <asm/pgalloc.h>
 #include <asm/uaccess.h>
@@ -374,7 +375,8 @@ static inline void add_mm_rss(struct mm_struct *mm, int file_rss, int anon_rss)
  *
  * The calling function must still handle the error.
  */
-void print_bad_pte(struct vm_area_struct *vma, pte_t pte, unsigned long vaddr)
+static void print_bad_pte(struct vm_area_struct *vma, pte_t pte,
+			  unsigned long vaddr)
 {
 	printk(KERN_ERR "Bad pte = %08llx, process = %s, "
 			"vm_flags = %lx, vaddr = %lx\n",
@@ -651,6 +653,7 @@ int copy_page_range(struct mm_struct *dst_mm, struct mm_struct *src_mm,
 	unsigned long next;
 	unsigned long addr = vma->vm_start;
 	unsigned long end = vma->vm_end;
+	int ret;
 
 	/*
 	 * Don't copy ptes where a page fault will fill them correctly.
@@ -666,17 +669,33 @@ int copy_page_range(struct mm_struct *dst_mm, struct mm_struct *src_mm,
 	if (is_vm_hugetlb_page(vma))
 		return copy_hugetlb_page_range(dst_mm, src_mm, vma);
 
+	/*
+	 * We need to invalidate the secondary MMU mappings only when
+	 * there could be a permission downgrade on the ptes of the
+	 * parent mm. And a permission downgrade will only happen if
+	 * is_cow_mapping() returns true.
+	 */
+	if (is_cow_mapping(vma->vm_flags))
+		mmu_notifier_invalidate_range_start(src_mm, addr, end);
+
+	ret = 0;
 	dst_pgd = pgd_offset(dst_mm, addr);
 	src_pgd = pgd_offset(src_mm, addr);
 	do {
 		next = pgd_addr_end(addr, end);
 		if (pgd_none_or_clear_bad(src_pgd))
 			continue;
-		if (copy_pud_range(dst_mm, src_mm, dst_pgd, src_pgd,
-						vma, addr, next))
-			return -ENOMEM;
+		if (unlikely(copy_pud_range(dst_mm, src_mm, dst_pgd, src_pgd,
+					    vma, addr, next))) {
+			ret = -ENOMEM;
+			break;
+		}
 	} while (dst_pgd++, src_pgd++, addr = next, addr != end);
-	return 0;
+
+	if (is_cow_mapping(vma->vm_flags))
+		mmu_notifier_invalidate_range_end(src_mm,
+						  vma->vm_start, end);
+	return ret;
 }
 
 static unsigned long zap_pte_range(struct mmu_gather *tlb,
@@ -880,7 +899,9 @@ unsigned long unmap_vmas(struct mmu_gather **tlbp,
 	unsigned long start = start_addr;
 	spinlock_t *i_mmap_lock = details? details->i_mmap_lock: NULL;
 	int fullmm = (*tlbp)->fullmm;
+	struct mm_struct *mm = vma->vm_mm;
 
+	mmu_notifier_invalidate_range_start(mm, start_addr, end_addr);
 	for ( ; vma && vma->vm_start < end_addr; vma = vma->vm_next) {
 		unsigned long end;
 
@@ -945,6 +966,7 @@ unsigned long unmap_vmas(struct mmu_gather **tlbp,
 		}
 	}
 out:
+	mmu_notifier_invalidate_range_end(mm, start_addr, end_addr);
 	return start;	/* which is now the end (or restart) address */
 }
 
@@ -972,6 +994,29 @@ unsigned long zap_page_range(struct vm_area_struct *vma, unsigned long address,
 	return end;
 }
 
+/**
+ * zap_vma_ptes - remove ptes mapping the vma
+ * @vma: vm_area_struct holding ptes to be zapped
+ * @address: starting address of pages to zap
+ * @size: number of bytes to zap
+ *
+ * This function only unmaps ptes assigned to VM_PFNMAP vmas.
+ *
+ * The entire address range must be fully contained within the vma.
+ *
+ * Returns 0 if successful.
+ */
+int zap_vma_ptes(struct vm_area_struct *vma, unsigned long address,
+		unsigned long size)
+{
+	if (address < vma->vm_start || address + size > vma->vm_end ||
+	    		!(vma->vm_flags & VM_PFNMAP))
+		return -1;
+	zap_page_range(vma, address, size, NULL);
+	return 0;
+}
+EXPORT_SYMBOL_GPL(zap_vma_ptes);
+
 /*
  * Do a quick page-table lookup for a single page.
  */
@@ -1615,10 +1660,11 @@ int apply_to_page_range(struct mm_struct *mm, unsigned long addr,
 {
 	pgd_t *pgd;
 	unsigned long next;
-	unsigned long end = addr + size;
+	unsigned long start = addr, end = addr + size;
 	int err;
 
 	BUG_ON(addr >= end);
+	mmu_notifier_invalidate_range_start(mm, start, end);
 	pgd = pgd_offset(mm, addr);
 	do {
 		next = pgd_addr_end(addr, end);
@@ -1626,6 +1672,7 @@ int apply_to_page_range(struct mm_struct *mm, unsigned long addr,
 		if (err)
 			break;
 	} while (pgd++, addr = next, addr != end);
+	mmu_notifier_invalidate_range_end(mm, start, end);
 	return err;
 }
 EXPORT_SYMBOL_GPL(apply_to_page_range);
@@ -1742,7 +1789,7 @@ static int do_wp_page(struct mm_struct *mm, struct vm_area_struct *vma,
 	 * not dirty accountable.
 	 */
 	if (PageAnon(old_page)) {
-		if (!TestSetPageLocked(old_page)) {
+		if (trylock_page(old_page)) {
 			reuse = can_share_swap_page(old_page);
 			unlock_page(old_page);
 		}
@@ -1838,7 +1885,7 @@ gotten:
 		 * seen in the presence of one thread doing SMC and another
 		 * thread doing COW.
 		 */
-		ptep_clear_flush(vma, address, page_table);
+		ptep_clear_flush_notify(vma, address, page_table);
 		set_pte_at(mm, address, page_table, entry);
 		update_mmu_cache(vma, address, entry);
 		lru_cache_add_active(new_page);
@@ -2718,16 +2765,26 @@ int make_pages_present(unsigned long addr, unsigned long end)
 
 	vma = find_vma(current->mm, addr);
 	if (!vma)
-		return -1;
+		return -ENOMEM;
 	write = (vma->vm_flags & VM_WRITE) != 0;
 	BUG_ON(addr >= end);
 	BUG_ON(end > vma->vm_end);
 	len = DIV_ROUND_UP(end, PAGE_SIZE) - addr/PAGE_SIZE;
 	ret = get_user_pages(current, current->mm, addr,
 			len, write, 0, NULL, NULL);
-	if (ret < 0)
+	if (ret < 0) {
+		/*
+		   SUS require strange return value to mlock
+		    - invalid addr generate to ENOMEM.
+		    - out of memory should generate EAGAIN.
+		*/
+		if (ret == -EFAULT)
+			ret = -ENOMEM;
+		else if (ret == -ENOMEM)
+			ret = -EAGAIN;
 		return ret;
-	return ret == len ? 0 : -1;
+	}
+	return ret == len ? 0 : -ENOMEM;
 }
 
 #if !defined(__HAVE_ARCH_GATE_AREA)
diff --git a/mm/mempolicy.c b/mm/mempolicy.c
index e550bec20582..83369058ec13 100644
--- a/mm/mempolicy.c
+++ b/mm/mempolicy.c
@@ -803,7 +803,6 @@ static int migrate_to_node(struct mm_struct *mm, int source, int dest,
 int do_migrate_pages(struct mm_struct *mm,
 	const nodemask_t *from_nodes, const nodemask_t *to_nodes, int flags)
 {
-	LIST_HEAD(pagelist);
 	int busy = 0;
 	int err = 0;
 	nodemask_t tmp;
diff --git a/mm/migrate.c b/mm/migrate.c
index 376cceba82f9..2a80136b23bb 100644
--- a/mm/migrate.c
+++ b/mm/migrate.c
@@ -285,7 +285,15 @@ void migration_entry_wait(struct mm_struct *mm, pmd_t *pmd,
 
 	page = migration_entry_to_page(entry);
 
-	get_page(page);
+	/*
+	 * Once radix-tree replacement of page migration started, page_count
+	 * *must* be zero. And, we don't want to call wait_on_page_locked()
+	 * against a page without get_page().
+	 * So, we use get_page_unless_zero(), here. Even failed, page fault
+	 * will occur again.
+	 */
+	if (!get_page_unless_zero(page))
+		goto out;
 	pte_unmap_unlock(ptep, ptl);
 	wait_on_page_locked(page);
 	put_page(page);
@@ -305,6 +313,7 @@ out:
 static int migrate_page_move_mapping(struct address_space *mapping,
 		struct page *newpage, struct page *page)
 {
+	int expected_count;
 	void **pslot;
 
 	if (!mapping) {
@@ -314,14 +323,20 @@ static int migrate_page_move_mapping(struct address_space *mapping,
 		return 0;
 	}
 
-	write_lock_irq(&mapping->tree_lock);
+	spin_lock_irq(&mapping->tree_lock);
 
 	pslot = radix_tree_lookup_slot(&mapping->page_tree,
  					page_index(page));
 
-	if (page_count(page) != 2 + !!PagePrivate(page) ||
+	expected_count = 2 + !!PagePrivate(page);
+	if (page_count(page) != expected_count ||
 			(struct page *)radix_tree_deref_slot(pslot) != page) {
-		write_unlock_irq(&mapping->tree_lock);
+		spin_unlock_irq(&mapping->tree_lock);
+		return -EAGAIN;
+	}
+
+	if (!page_freeze_refs(page, expected_count)) {
+		spin_unlock_irq(&mapping->tree_lock);
 		return -EAGAIN;
 	}
 
@@ -338,6 +353,7 @@ static int migrate_page_move_mapping(struct address_space *mapping,
 
 	radix_tree_replace_slot(pslot, newpage);
 
+	page_unfreeze_refs(page, expected_count);
 	/*
 	 * Drop cache reference from old page.
 	 * We know this isn't the last reference.
@@ -357,7 +373,9 @@ static int migrate_page_move_mapping(struct address_space *mapping,
 	__dec_zone_page_state(page, NR_FILE_PAGES);
 	__inc_zone_page_state(newpage, NR_FILE_PAGES);
 
-	write_unlock_irq(&mapping->tree_lock);
+	spin_unlock_irq(&mapping->tree_lock);
+	if (!PageSwapCache(newpage))
+		mem_cgroup_uncharge_cache_page(page);
 
 	return 0;
 }
@@ -587,7 +605,7 @@ static int move_to_new_page(struct page *newpage, struct page *page)
 	 * establishing additional references. We are the only one
 	 * holding a reference to the new page at this point.
 	 */
-	if (TestSetPageLocked(newpage))
+	if (!trylock_page(newpage))
 		BUG();
 
 	/* Prepare mapping for the new page.*/
@@ -611,7 +629,6 @@ static int move_to_new_page(struct page *newpage, struct page *page)
 		rc = fallback_migrate_page(mapping, newpage, page);
 
 	if (!rc) {
-		mem_cgroup_page_migration(page, newpage);
 		remove_migration_ptes(page, newpage);
 	} else
 		newpage->mapping = NULL;
@@ -641,8 +658,16 @@ static int unmap_and_move(new_page_t get_new_page, unsigned long private,
 		/* page was freed from under us. So we are done. */
 		goto move_newpage;
 
+	charge = mem_cgroup_prepare_migration(page, newpage);
+	if (charge == -ENOMEM) {
+		rc = -ENOMEM;
+		goto move_newpage;
+	}
+	/* prepare cgroup just returns 0 or -ENOMEM */
+	BUG_ON(charge);
+
 	rc = -EAGAIN;
-	if (TestSetPageLocked(page)) {
+	if (!trylock_page(page)) {
 		if (!force)
 			goto move_newpage;
 		lock_page(page);
@@ -692,19 +717,14 @@ static int unmap_and_move(new_page_t get_new_page, unsigned long private,
 		goto rcu_unlock;
 	}
 
-	charge = mem_cgroup_prepare_migration(page);
 	/* Establish migration ptes or remove ptes */
 	try_to_unmap(page, 1);
 
 	if (!page_mapped(page))
 		rc = move_to_new_page(newpage, page);
 
-	if (rc) {
+	if (rc)
 		remove_migration_ptes(page, page);
-		if (charge)
-			mem_cgroup_end_migration(page);
-	} else if (charge)
- 		mem_cgroup_end_migration(newpage);
 rcu_unlock:
 	if (rcu_locked)
 		rcu_read_unlock();
@@ -725,6 +745,8 @@ unlock:
 	}
 
 move_newpage:
+	if (!charge)
+		mem_cgroup_end_migration(newpage);
 	/*
 	 * Move the new page to the LRU. If migration was not successful
 	 * then this will free the page.
diff --git a/mm/mlock.c b/mm/mlock.c
index 7b2656055d6a..01fbe93eff5c 100644
--- a/mm/mlock.c
+++ b/mm/mlock.c
@@ -78,8 +78,6 @@ success:
 
 	mm->locked_vm -= pages;
 out:
-	if (ret == -ENOMEM)
-		ret = -EAGAIN;
 	return ret;
 }
 
diff --git a/mm/mm_init.c b/mm/mm_init.c
index c6af41ea9994..4e0e26591dfa 100644
--- a/mm/mm_init.c
+++ b/mm/mm_init.c
@@ -12,7 +12,11 @@
 #include "internal.h"
 
 #ifdef CONFIG_DEBUG_MEMORY_INIT
-int __meminitdata mminit_loglevel;
+int mminit_loglevel;
+
+#ifndef SECTIONS_SHIFT
+#define SECTIONS_SHIFT	0
+#endif
 
 /* The zonelists are simply reported, validation is manual. */
 void mminit_verify_zonelist(void)
@@ -74,11 +78,7 @@ void __init mminit_verify_pageflags_layout(void)
 		NR_PAGEFLAGS);
 	mminit_dprintk(MMINIT_TRACE, "pageflags_layout_shifts",
 		"Section %d Node %d Zone %d\n",
-#ifdef SECTIONS_SHIFT
 		SECTIONS_SHIFT,
-#else
-		0,
-#endif
 		NODES_SHIFT,
 		ZONES_SHIFT);
 	mminit_dprintk(MMINIT_TRACE, "pageflags_layout_offsets",
diff --git a/mm/mmap.c b/mm/mmap.c
index 5e0cc99e9cd5..e7a5a68a9c2e 100644
--- a/mm/mmap.c
+++ b/mm/mmap.c
@@ -26,6 +26,7 @@
 #include <linux/mount.h>
 #include <linux/mempolicy.h>
 #include <linux/rmap.h>
+#include <linux/mmu_notifier.h>
 
 #include <asm/uaccess.h>
 #include <asm/cacheflush.h>
@@ -369,7 +370,7 @@ find_vma_prepare(struct mm_struct *mm, unsigned long addr,
 		if (vma_tmp->vm_end > addr) {
 			vma = vma_tmp;
 			if (vma_tmp->vm_start <= addr)
-				return vma;
+				break;
 			__rb_link = &__rb_parent->rb_left;
 		} else {
 			rb_prev = __rb_parent;
@@ -1029,6 +1030,10 @@ unsigned long do_mmap_pgoff(struct file * file, unsigned long addr,
 	} else {
 		switch (flags & MAP_TYPE) {
 		case MAP_SHARED:
+			/*
+			 * Ignore pgoff.
+			 */
+			pgoff = 0;
 			vm_flags |= VM_SHARED | VM_MAYSHARE;
 			break;
 		case MAP_PRIVATE:
@@ -2061,6 +2066,7 @@ void exit_mmap(struct mm_struct *mm)
 
 	/* mm's last user has gone, and its about to be pulled down */
 	arch_exit_mmap(mm);
+	mmu_notifier_release(mm);
 
 	lru_add_drain();
 	flush_cache_mm(mm);
@@ -2268,3 +2274,167 @@ int install_special_mapping(struct mm_struct *mm,
 
 	return 0;
 }
+
+static DEFINE_MUTEX(mm_all_locks_mutex);
+
+static void vm_lock_anon_vma(struct mm_struct *mm, struct anon_vma *anon_vma)
+{
+	if (!test_bit(0, (unsigned long *) &anon_vma->head.next)) {
+		/*
+		 * The LSB of head.next can't change from under us
+		 * because we hold the mm_all_locks_mutex.
+		 */
+		spin_lock_nest_lock(&anon_vma->lock, &mm->mmap_sem);
+		/*
+		 * We can safely modify head.next after taking the
+		 * anon_vma->lock. If some other vma in this mm shares
+		 * the same anon_vma we won't take it again.
+		 *
+		 * No need of atomic instructions here, head.next
+		 * can't change from under us thanks to the
+		 * anon_vma->lock.
+		 */
+		if (__test_and_set_bit(0, (unsigned long *)
+				       &anon_vma->head.next))
+			BUG();
+	}
+}
+
+static void vm_lock_mapping(struct mm_struct *mm, struct address_space *mapping)
+{
+	if (!test_bit(AS_MM_ALL_LOCKS, &mapping->flags)) {
+		/*
+		 * AS_MM_ALL_LOCKS can't change from under us because
+		 * we hold the mm_all_locks_mutex.
+		 *
+		 * Operations on ->flags have to be atomic because
+		 * even if AS_MM_ALL_LOCKS is stable thanks to the
+		 * mm_all_locks_mutex, there may be other cpus
+		 * changing other bitflags in parallel to us.
+		 */
+		if (test_and_set_bit(AS_MM_ALL_LOCKS, &mapping->flags))
+			BUG();
+		spin_lock_nest_lock(&mapping->i_mmap_lock, &mm->mmap_sem);
+	}
+}
+
+/*
+ * This operation locks against the VM for all pte/vma/mm related
+ * operations that could ever happen on a certain mm. This includes
+ * vmtruncate, try_to_unmap, and all page faults.
+ *
+ * The caller must take the mmap_sem in write mode before calling
+ * mm_take_all_locks(). The caller isn't allowed to release the
+ * mmap_sem until mm_drop_all_locks() returns.
+ *
+ * mmap_sem in write mode is required in order to block all operations
+ * that could modify pagetables and free pages without need of
+ * altering the vma layout (for example populate_range() with
+ * nonlinear vmas). It's also needed in write mode to avoid new
+ * anon_vmas to be associated with existing vmas.
+ *
+ * A single task can't take more than one mm_take_all_locks() in a row
+ * or it would deadlock.
+ *
+ * The LSB in anon_vma->head.next and the AS_MM_ALL_LOCKS bitflag in
+ * mapping->flags avoid to take the same lock twice, if more than one
+ * vma in this mm is backed by the same anon_vma or address_space.
+ *
+ * We can take all the locks in random order because the VM code
+ * taking i_mmap_lock or anon_vma->lock outside the mmap_sem never
+ * takes more than one of them in a row. Secondly we're protected
+ * against a concurrent mm_take_all_locks() by the mm_all_locks_mutex.
+ *
+ * mm_take_all_locks() and mm_drop_all_locks are expensive operations
+ * that may have to take thousand of locks.
+ *
+ * mm_take_all_locks() can fail if it's interrupted by signals.
+ */
+int mm_take_all_locks(struct mm_struct *mm)
+{
+	struct vm_area_struct *vma;
+	int ret = -EINTR;
+
+	BUG_ON(down_read_trylock(&mm->mmap_sem));
+
+	mutex_lock(&mm_all_locks_mutex);
+
+	for (vma = mm->mmap; vma; vma = vma->vm_next) {
+		if (signal_pending(current))
+			goto out_unlock;
+		if (vma->vm_file && vma->vm_file->f_mapping)
+			vm_lock_mapping(mm, vma->vm_file->f_mapping);
+	}
+
+	for (vma = mm->mmap; vma; vma = vma->vm_next) {
+		if (signal_pending(current))
+			goto out_unlock;
+		if (vma->anon_vma)
+			vm_lock_anon_vma(mm, vma->anon_vma);
+	}
+
+	ret = 0;
+
+out_unlock:
+	if (ret)
+		mm_drop_all_locks(mm);
+
+	return ret;
+}
+
+static void vm_unlock_anon_vma(struct anon_vma *anon_vma)
+{
+	if (test_bit(0, (unsigned long *) &anon_vma->head.next)) {
+		/*
+		 * The LSB of head.next can't change to 0 from under
+		 * us because we hold the mm_all_locks_mutex.
+		 *
+		 * We must however clear the bitflag before unlocking
+		 * the vma so the users using the anon_vma->head will
+		 * never see our bitflag.
+		 *
+		 * No need of atomic instructions here, head.next
+		 * can't change from under us until we release the
+		 * anon_vma->lock.
+		 */
+		if (!__test_and_clear_bit(0, (unsigned long *)
+					  &anon_vma->head.next))
+			BUG();
+		spin_unlock(&anon_vma->lock);
+	}
+}
+
+static void vm_unlock_mapping(struct address_space *mapping)
+{
+	if (test_bit(AS_MM_ALL_LOCKS, &mapping->flags)) {
+		/*
+		 * AS_MM_ALL_LOCKS can't change to 0 from under us
+		 * because we hold the mm_all_locks_mutex.
+		 */
+		spin_unlock(&mapping->i_mmap_lock);
+		if (!test_and_clear_bit(AS_MM_ALL_LOCKS,
+					&mapping->flags))
+			BUG();
+	}
+}
+
+/*
+ * The mmap_sem cannot be released by the caller until
+ * mm_drop_all_locks() returns.
+ */
+void mm_drop_all_locks(struct mm_struct *mm)
+{
+	struct vm_area_struct *vma;
+
+	BUG_ON(down_read_trylock(&mm->mmap_sem));
+	BUG_ON(!mutex_is_locked(&mm_all_locks_mutex));
+
+	for (vma = mm->mmap; vma; vma = vma->vm_next) {
+		if (vma->anon_vma)
+			vm_unlock_anon_vma(vma->anon_vma);
+		if (vma->vm_file && vma->vm_file->f_mapping)
+			vm_unlock_mapping(vma->vm_file->f_mapping);
+	}
+
+	mutex_unlock(&mm_all_locks_mutex);
+}
diff --git a/mm/mmu_notifier.c b/mm/mmu_notifier.c
new file mode 100644
index 000000000000..5f4ef0250bee
--- /dev/null
+++ b/mm/mmu_notifier.c
@@ -0,0 +1,277 @@
+/*
+ *  linux/mm/mmu_notifier.c
+ *
+ *  Copyright (C) 2008  Qumranet, Inc.
+ *  Copyright (C) 2008  SGI
+ *             Christoph Lameter <clameter@sgi.com>
+ *
+ *  This work is licensed under the terms of the GNU GPL, version 2. See
+ *  the COPYING file in the top-level directory.
+ */
+
+#include <linux/rculist.h>
+#include <linux/mmu_notifier.h>
+#include <linux/module.h>
+#include <linux/mm.h>
+#include <linux/err.h>
+#include <linux/rcupdate.h>
+#include <linux/sched.h>
+
+/*
+ * This function can't run concurrently against mmu_notifier_register
+ * because mm->mm_users > 0 during mmu_notifier_register and exit_mmap
+ * runs with mm_users == 0. Other tasks may still invoke mmu notifiers
+ * in parallel despite there being no task using this mm any more,
+ * through the vmas outside of the exit_mmap context, such as with
+ * vmtruncate. This serializes against mmu_notifier_unregister with
+ * the mmu_notifier_mm->lock in addition to RCU and it serializes
+ * against the other mmu notifiers with RCU. struct mmu_notifier_mm
+ * can't go away from under us as exit_mmap holds an mm_count pin
+ * itself.
+ */
+void __mmu_notifier_release(struct mm_struct *mm)
+{
+	struct mmu_notifier *mn;
+
+	spin_lock(&mm->mmu_notifier_mm->lock);
+	while (unlikely(!hlist_empty(&mm->mmu_notifier_mm->list))) {
+		mn = hlist_entry(mm->mmu_notifier_mm->list.first,
+				 struct mmu_notifier,
+				 hlist);
+		/*
+		 * We arrived before mmu_notifier_unregister so
+		 * mmu_notifier_unregister will do nothing other than
+		 * to wait ->release to finish and
+		 * mmu_notifier_unregister to return.
+		 */
+		hlist_del_init_rcu(&mn->hlist);
+		/*
+		 * RCU here will block mmu_notifier_unregister until
+		 * ->release returns.
+		 */
+		rcu_read_lock();
+		spin_unlock(&mm->mmu_notifier_mm->lock);
+		/*
+		 * if ->release runs before mmu_notifier_unregister it
+		 * must be handled as it's the only way for the driver
+		 * to flush all existing sptes and stop the driver
+		 * from establishing any more sptes before all the
+		 * pages in the mm are freed.
+		 */
+		if (mn->ops->release)
+			mn->ops->release(mn, mm);
+		rcu_read_unlock();
+		spin_lock(&mm->mmu_notifier_mm->lock);
+	}
+	spin_unlock(&mm->mmu_notifier_mm->lock);
+
+	/*
+	 * synchronize_rcu here prevents mmu_notifier_release to
+	 * return to exit_mmap (which would proceed freeing all pages
+	 * in the mm) until the ->release method returns, if it was
+	 * invoked by mmu_notifier_unregister.
+	 *
+	 * The mmu_notifier_mm can't go away from under us because one
+	 * mm_count is hold by exit_mmap.
+	 */
+	synchronize_rcu();
+}
+
+/*
+ * If no young bitflag is supported by the hardware, ->clear_flush_young can
+ * unmap the address and return 1 or 0 depending if the mapping previously
+ * existed or not.
+ */
+int __mmu_notifier_clear_flush_young(struct mm_struct *mm,
+					unsigned long address)
+{
+	struct mmu_notifier *mn;
+	struct hlist_node *n;
+	int young = 0;
+
+	rcu_read_lock();
+	hlist_for_each_entry_rcu(mn, n, &mm->mmu_notifier_mm->list, hlist) {
+		if (mn->ops->clear_flush_young)
+			young |= mn->ops->clear_flush_young(mn, mm, address);
+	}
+	rcu_read_unlock();
+
+	return young;
+}
+
+void __mmu_notifier_invalidate_page(struct mm_struct *mm,
+					  unsigned long address)
+{
+	struct mmu_notifier *mn;
+	struct hlist_node *n;
+
+	rcu_read_lock();
+	hlist_for_each_entry_rcu(mn, n, &mm->mmu_notifier_mm->list, hlist) {
+		if (mn->ops->invalidate_page)
+			mn->ops->invalidate_page(mn, mm, address);
+	}
+	rcu_read_unlock();
+}
+
+void __mmu_notifier_invalidate_range_start(struct mm_struct *mm,
+				  unsigned long start, unsigned long end)
+{
+	struct mmu_notifier *mn;
+	struct hlist_node *n;
+
+	rcu_read_lock();
+	hlist_for_each_entry_rcu(mn, n, &mm->mmu_notifier_mm->list, hlist) {
+		if (mn->ops->invalidate_range_start)
+			mn->ops->invalidate_range_start(mn, mm, start, end);
+	}
+	rcu_read_unlock();
+}
+
+void __mmu_notifier_invalidate_range_end(struct mm_struct *mm,
+				  unsigned long start, unsigned long end)
+{
+	struct mmu_notifier *mn;
+	struct hlist_node *n;
+
+	rcu_read_lock();
+	hlist_for_each_entry_rcu(mn, n, &mm->mmu_notifier_mm->list, hlist) {
+		if (mn->ops->invalidate_range_end)
+			mn->ops->invalidate_range_end(mn, mm, start, end);
+	}
+	rcu_read_unlock();
+}
+
+static int do_mmu_notifier_register(struct mmu_notifier *mn,
+				    struct mm_struct *mm,
+				    int take_mmap_sem)
+{
+	struct mmu_notifier_mm *mmu_notifier_mm;
+	int ret;
+
+	BUG_ON(atomic_read(&mm->mm_users) <= 0);
+
+	ret = -ENOMEM;
+	mmu_notifier_mm = kmalloc(sizeof(struct mmu_notifier_mm), GFP_KERNEL);
+	if (unlikely(!mmu_notifier_mm))
+		goto out;
+
+	if (take_mmap_sem)
+		down_write(&mm->mmap_sem);
+	ret = mm_take_all_locks(mm);
+	if (unlikely(ret))
+		goto out_cleanup;
+
+	if (!mm_has_notifiers(mm)) {
+		INIT_HLIST_HEAD(&mmu_notifier_mm->list);
+		spin_lock_init(&mmu_notifier_mm->lock);
+		mm->mmu_notifier_mm = mmu_notifier_mm;
+		mmu_notifier_mm = NULL;
+	}
+	atomic_inc(&mm->mm_count);
+
+	/*
+	 * Serialize the update against mmu_notifier_unregister. A
+	 * side note: mmu_notifier_release can't run concurrently with
+	 * us because we hold the mm_users pin (either implicitly as
+	 * current->mm or explicitly with get_task_mm() or similar).
+	 * We can't race against any other mmu notifier method either
+	 * thanks to mm_take_all_locks().
+	 */
+	spin_lock(&mm->mmu_notifier_mm->lock);
+	hlist_add_head(&mn->hlist, &mm->mmu_notifier_mm->list);
+	spin_unlock(&mm->mmu_notifier_mm->lock);
+
+	mm_drop_all_locks(mm);
+out_cleanup:
+	if (take_mmap_sem)
+		up_write(&mm->mmap_sem);
+	/* kfree() does nothing if mmu_notifier_mm is NULL */
+	kfree(mmu_notifier_mm);
+out:
+	BUG_ON(atomic_read(&mm->mm_users) <= 0);
+	return ret;
+}
+
+/*
+ * Must not hold mmap_sem nor any other VM related lock when calling
+ * this registration function. Must also ensure mm_users can't go down
+ * to zero while this runs to avoid races with mmu_notifier_release,
+ * so mm has to be current->mm or the mm should be pinned safely such
+ * as with get_task_mm(). If the mm is not current->mm, the mm_users
+ * pin should be released by calling mmput after mmu_notifier_register
+ * returns. mmu_notifier_unregister must be always called to
+ * unregister the notifier. mm_count is automatically pinned to allow
+ * mmu_notifier_unregister to safely run at any time later, before or
+ * after exit_mmap. ->release will always be called before exit_mmap
+ * frees the pages.
+ */
+int mmu_notifier_register(struct mmu_notifier *mn, struct mm_struct *mm)
+{
+	return do_mmu_notifier_register(mn, mm, 1);
+}
+EXPORT_SYMBOL_GPL(mmu_notifier_register);
+
+/*
+ * Same as mmu_notifier_register but here the caller must hold the
+ * mmap_sem in write mode.
+ */
+int __mmu_notifier_register(struct mmu_notifier *mn, struct mm_struct *mm)
+{
+	return do_mmu_notifier_register(mn, mm, 0);
+}
+EXPORT_SYMBOL_GPL(__mmu_notifier_register);
+
+/* this is called after the last mmu_notifier_unregister() returned */
+void __mmu_notifier_mm_destroy(struct mm_struct *mm)
+{
+	BUG_ON(!hlist_empty(&mm->mmu_notifier_mm->list));
+	kfree(mm->mmu_notifier_mm);
+	mm->mmu_notifier_mm = LIST_POISON1; /* debug */
+}
+
+/*
+ * This releases the mm_count pin automatically and frees the mm
+ * structure if it was the last user of it. It serializes against
+ * running mmu notifiers with RCU and against mmu_notifier_unregister
+ * with the unregister lock + RCU. All sptes must be dropped before
+ * calling mmu_notifier_unregister. ->release or any other notifier
+ * method may be invoked concurrently with mmu_notifier_unregister,
+ * and only after mmu_notifier_unregister returned we're guaranteed
+ * that ->release or any other method can't run anymore.
+ */
+void mmu_notifier_unregister(struct mmu_notifier *mn, struct mm_struct *mm)
+{
+	BUG_ON(atomic_read(&mm->mm_count) <= 0);
+
+	spin_lock(&mm->mmu_notifier_mm->lock);
+	if (!hlist_unhashed(&mn->hlist)) {
+		hlist_del_rcu(&mn->hlist);
+
+		/*
+		 * RCU here will force exit_mmap to wait ->release to finish
+		 * before freeing the pages.
+		 */
+		rcu_read_lock();
+		spin_unlock(&mm->mmu_notifier_mm->lock);
+		/*
+		 * exit_mmap will block in mmu_notifier_release to
+		 * guarantee ->release is called before freeing the
+		 * pages.
+		 */
+		if (mn->ops->release)
+			mn->ops->release(mn, mm);
+		rcu_read_unlock();
+	} else
+		spin_unlock(&mm->mmu_notifier_mm->lock);
+
+	/*
+	 * Wait any running method to finish, of course including
+	 * ->release if it was run by mmu_notifier_relase instead of us.
+	 */
+	synchronize_rcu();
+
+	BUG_ON(atomic_read(&mm->mm_count) <= 0);
+
+	mmdrop(mm);
+}
+EXPORT_SYMBOL_GPL(mmu_notifier_unregister);
diff --git a/mm/mprotect.c b/mm/mprotect.c
index abd645a3b0a0..fded06f923f4 100644
--- a/mm/mprotect.c
+++ b/mm/mprotect.c
@@ -21,6 +21,7 @@
 #include <linux/syscalls.h>
 #include <linux/swap.h>
 #include <linux/swapops.h>
+#include <linux/mmu_notifier.h>
 #include <asm/uaccess.h>
 #include <asm/pgtable.h>
 #include <asm/cacheflush.h>
@@ -203,10 +204,12 @@ success:
 		dirty_accountable = 1;
 	}
 
+	mmu_notifier_invalidate_range_start(mm, start, end);
 	if (is_vm_hugetlb_page(vma))
 		hugetlb_change_protection(vma, start, end, vma->vm_page_prot);
 	else
 		change_protection(vma, start, end, vma->vm_page_prot, dirty_accountable);
+	mmu_notifier_invalidate_range_end(mm, start, end);
 	vm_stat_account(mm, oldflags, vma->vm_file, -nrpages);
 	vm_stat_account(mm, newflags, vma->vm_file, nrpages);
 	return 0;
diff --git a/mm/mremap.c b/mm/mremap.c
index 08e3c7f2bd15..1a7743923c8c 100644
--- a/mm/mremap.c
+++ b/mm/mremap.c
@@ -18,6 +18,7 @@
 #include <linux/highmem.h>
 #include <linux/security.h>
 #include <linux/syscalls.h>
+#include <linux/mmu_notifier.h>
 
 #include <asm/uaccess.h>
 #include <asm/cacheflush.h>
@@ -74,7 +75,11 @@ static void move_ptes(struct vm_area_struct *vma, pmd_t *old_pmd,
 	struct mm_struct *mm = vma->vm_mm;
 	pte_t *old_pte, *new_pte, pte;
 	spinlock_t *old_ptl, *new_ptl;
+	unsigned long old_start;
 
+	old_start = old_addr;
+	mmu_notifier_invalidate_range_start(vma->vm_mm,
+					    old_start, old_end);
 	if (vma->vm_file) {
 		/*
 		 * Subtle point from Rajesh Venkatasubramanian: before
@@ -116,6 +121,7 @@ static void move_ptes(struct vm_area_struct *vma, pmd_t *old_pmd,
 	pte_unmap_unlock(old_pte - 1, old_ptl);
 	if (mapping)
 		spin_unlock(&mapping->i_mmap_lock);
+	mmu_notifier_invalidate_range_end(vma->vm_mm, old_start, old_end);
 }
 
 #define LATENCY_LIMIT	(64 * PAGE_SIZE)
diff --git a/mm/nommu.c b/mm/nommu.c
index 4462b6a3fcb9..ed75bc962fbe 100644
--- a/mm/nommu.c
+++ b/mm/nommu.c
@@ -22,7 +22,7 @@
 #include <linux/pagemap.h>
 #include <linux/slab.h>
 #include <linux/vmalloc.h>
-#include <linux/ptrace.h>
+#include <linux/tracehook.h>
 #include <linux/blkdev.h>
 #include <linux/backing-dev.h>
 #include <linux/mount.h>
@@ -266,6 +266,27 @@ void *vmalloc_node(unsigned long size, int node)
 }
 EXPORT_SYMBOL(vmalloc_node);
 
+#ifndef PAGE_KERNEL_EXEC
+# define PAGE_KERNEL_EXEC PAGE_KERNEL
+#endif
+
+/**
+ *	vmalloc_exec  -  allocate virtually contiguous, executable memory
+ *	@size:		allocation size
+ *
+ *	Kernel-internal function to allocate enough pages to cover @size
+ *	the page level allocator and map them into contiguous and
+ *	executable kernel virtual space.
+ *
+ *	For tight control over page level allocator and protection flags
+ *	use __vmalloc() instead.
+ */
+
+void *vmalloc_exec(unsigned long size)
+{
+	return __vmalloc(size, GFP_KERNEL | __GFP_HIGHMEM, PAGE_KERNEL_EXEC);
+}
+
 /**
  * vmalloc_32  -  allocate virtually contiguous memory (32bit addressable)
  *	@size:		allocation size
@@ -745,7 +766,7 @@ static unsigned long determine_vm_flags(struct file *file,
 	 * it's being traced - otherwise breakpoints set in it may interfere
 	 * with another untraced process
 	 */
-	if ((flags & MAP_PRIVATE) && (current->ptrace & PT_PTRACED))
+	if ((flags & MAP_PRIVATE) && tracehook_expect_breakpoints(current))
 		vm_flags &= ~VM_MAYSHARE;
 
 	return vm_flags;
diff --git a/mm/oom_kill.c b/mm/oom_kill.c
index 8a5467ee6265..64e5b4bcd964 100644
--- a/mm/oom_kill.c
+++ b/mm/oom_kill.c
@@ -26,6 +26,7 @@
 #include <linux/module.h>
 #include <linux/notifier.h>
 #include <linux/memcontrol.h>
+#include <linux/security.h>
 
 int sysctl_panic_on_oom;
 int sysctl_oom_kill_allocating_task;
@@ -128,7 +129,8 @@ unsigned long badness(struct task_struct *p, unsigned long uptime)
 	 * Superuser processes are usually more important, so we make it
 	 * less likely that we kill those.
 	 */
-	if (__capable(p, CAP_SYS_ADMIN) || __capable(p, CAP_SYS_RESOURCE))
+	if (has_capability(p, CAP_SYS_ADMIN) ||
+	    has_capability(p, CAP_SYS_RESOURCE))
 		points /= 4;
 
 	/*
@@ -137,7 +139,7 @@ unsigned long badness(struct task_struct *p, unsigned long uptime)
 	 * tend to only have this flag set on applications they think
 	 * of as important.
 	 */
-	if (__capable(p, CAP_SYS_RAWIO))
+	if (has_capability(p, CAP_SYS_RAWIO))
 		points /= 4;
 
 	/*
diff --git a/mm/page-writeback.c b/mm/page-writeback.c
index 94c6d8988ab3..24de8b65fdbd 100644
--- a/mm/page-writeback.c
+++ b/mm/page-writeback.c
@@ -1088,7 +1088,7 @@ int __set_page_dirty_nobuffers(struct page *page)
 		if (!mapping)
 			return 1;
 
-		write_lock_irq(&mapping->tree_lock);
+		spin_lock_irq(&mapping->tree_lock);
 		mapping2 = page_mapping(page);
 		if (mapping2) { /* Race with truncate? */
 			BUG_ON(mapping2 != mapping);
@@ -1102,7 +1102,7 @@ int __set_page_dirty_nobuffers(struct page *page)
 			radix_tree_tag_set(&mapping->page_tree,
 				page_index(page), PAGECACHE_TAG_DIRTY);
 		}
-		write_unlock_irq(&mapping->tree_lock);
+		spin_unlock_irq(&mapping->tree_lock);
 		if (mapping->host) {
 			/* !PageAnon && !swapper_space */
 			__mark_inode_dirty(mapping->host, I_DIRTY_PAGES);
@@ -1258,7 +1258,7 @@ int test_clear_page_writeback(struct page *page)
 		struct backing_dev_info *bdi = mapping->backing_dev_info;
 		unsigned long flags;
 
-		write_lock_irqsave(&mapping->tree_lock, flags);
+		spin_lock_irqsave(&mapping->tree_lock, flags);
 		ret = TestClearPageWriteback(page);
 		if (ret) {
 			radix_tree_tag_clear(&mapping->page_tree,
@@ -1269,7 +1269,7 @@ int test_clear_page_writeback(struct page *page)
 				__bdi_writeout_inc(bdi);
 			}
 		}
-		write_unlock_irqrestore(&mapping->tree_lock, flags);
+		spin_unlock_irqrestore(&mapping->tree_lock, flags);
 	} else {
 		ret = TestClearPageWriteback(page);
 	}
@@ -1287,7 +1287,7 @@ int test_set_page_writeback(struct page *page)
 		struct backing_dev_info *bdi = mapping->backing_dev_info;
 		unsigned long flags;
 
-		write_lock_irqsave(&mapping->tree_lock, flags);
+		spin_lock_irqsave(&mapping->tree_lock, flags);
 		ret = TestSetPageWriteback(page);
 		if (!ret) {
 			radix_tree_tag_set(&mapping->page_tree,
@@ -1300,7 +1300,7 @@ int test_set_page_writeback(struct page *page)
 			radix_tree_tag_clear(&mapping->page_tree,
 						page_index(page),
 						PAGECACHE_TAG_DIRTY);
-		write_unlock_irqrestore(&mapping->tree_lock, flags);
+		spin_unlock_irqrestore(&mapping->tree_lock, flags);
 	} else {
 		ret = TestSetPageWriteback(page);
 	}
diff --git a/mm/page_alloc.c b/mm/page_alloc.c
index 6da667274df5..e293c58bea58 100644
--- a/mm/page_alloc.c
+++ b/mm/page_alloc.c
@@ -694,6 +694,9 @@ static int move_freepages(struct zone *zone,
 #endif
 
 	for (page = start_page; page <= end_page;) {
+		/* Make sure we are not inadvertently changing nodes */
+		VM_BUG_ON(page_to_nid(page) != zone_to_nid(zone));
+
 		if (!pfn_valid_within(page_to_pfn(page))) {
 			page++;
 			continue;
@@ -2372,7 +2375,7 @@ static void build_zonelist_cache(pg_data_t *pgdat)
 
 #endif	/* CONFIG_NUMA */
 
-/* return values int ....just for stop_machine_run() */
+/* return values int ....just for stop_machine() */
 static int __build_all_zonelists(void *dummy)
 {
 	int nid;
@@ -2397,7 +2400,7 @@ void build_all_zonelists(void)
 	} else {
 		/* we have to stop all cpus to guarantee there is no user
 		   of zonelist */
-		stop_machine_run(__build_all_zonelists, NULL, NR_CPUS);
+		stop_machine(__build_all_zonelists, NULL, NULL);
 		/* cpuset refresh routine should be here */
 	}
 	vm_total_pages = nr_free_pagecache_pages();
@@ -2516,6 +2519,10 @@ static void setup_zone_migrate_reserve(struct zone *zone)
 			continue;
 		page = pfn_to_page(pfn);
 
+		/* Watch out for overlapping nodes */
+		if (page_to_nid(page) != zone_to_nid(zone))
+			continue;
+
 		/* Blocks with reserved pages will never free, skip them. */
 		if (PageReserved(page))
 			continue;
@@ -3753,23 +3760,6 @@ unsigned long __init find_min_pfn_with_active_regions(void)
 	return find_min_pfn_for_node(MAX_NUMNODES);
 }
 
-/**
- * find_max_pfn_with_active_regions - Find the maximum PFN registered
- *
- * It returns the maximum PFN based on information provided via
- * add_active_range().
- */
-unsigned long __init find_max_pfn_with_active_regions(void)
-{
-	int i;
-	unsigned long max_pfn = 0;
-
-	for (i = 0; i < nr_nodemap_entries; i++)
-		max_pfn = max(max_pfn, early_node_map[i].end_pfn);
-
-	return max_pfn;
-}
-
 /*
  * early_calculate_totalpages()
  * Sum pages in active regions for movable zone.
@@ -4081,7 +4071,7 @@ void __init set_dma_reserve(unsigned long new_dma_reserve)
 }
 
 #ifndef CONFIG_NEED_MULTIPLE_NODES
-struct pglist_data contig_page_data = { .bdata = &bootmem_node_data[0] };
+struct pglist_data __refdata contig_page_data = { .bdata = &bootmem_node_data[0] };
 EXPORT_SYMBOL(contig_page_data);
 #endif
 
@@ -4454,7 +4444,7 @@ void *__init alloc_large_system_hash(const char *tablename,
 	do {
 		size = bucketsize << log2qty;
 		if (flags & HASH_EARLY)
-			table = alloc_bootmem(size);
+			table = alloc_bootmem_nopanic(size);
 		else if (hashdist)
 			table = __vmalloc(size, GFP_ATOMIC, PAGE_KERNEL);
 		else {
diff --git a/mm/page_isolation.c b/mm/page_isolation.c
index 3444b58033c8..c69f84fe038d 100644
--- a/mm/page_isolation.c
+++ b/mm/page_isolation.c
@@ -2,7 +2,6 @@
  * linux/mm/page_isolation.c
  */
 
-#include <stddef.h>
 #include <linux/mm.h>
 #include <linux/page-isolation.h>
 #include <linux/pageblock-flags.h>
diff --git a/mm/pdflush.c b/mm/pdflush.c
index 9d834aa4b979..0cbe0c60c6bf 100644
--- a/mm/pdflush.c
+++ b/mm/pdflush.c
@@ -130,7 +130,7 @@ static int __pdflush(struct pdflush_work *my_work)
 		 * Thread creation: For how long have there been zero
 		 * available threads?
 		 */
-		if (jiffies - last_empty_jifs > 1 * HZ) {
+		if (time_after(jiffies, last_empty_jifs + 1 * HZ)) {
 			/* unlocked list_empty() test is OK here */
 			if (list_empty(&pdflush_list)) {
 				/* unlocked test is OK here */
@@ -151,7 +151,7 @@ static int __pdflush(struct pdflush_work *my_work)
 		if (nr_pdflush_threads <= MIN_PDFLUSH_THREADS)
 			continue;
 		pdf = list_entry(pdflush_list.prev, struct pdflush_work, list);
-		if (jiffies - pdf->when_i_went_to_sleep > 1 * HZ) {
+		if (time_after(jiffies, pdf->when_i_went_to_sleep + 1 * HZ)) {
 			/* Limit exit rate */
 			pdf->when_i_went_to_sleep = jiffies;
 			break;					/* exeunt */
diff --git a/mm/quicklist.c b/mm/quicklist.c
index 3f703f7cb398..8dbb6805ef35 100644
--- a/mm/quicklist.c
+++ b/mm/quicklist.c
@@ -26,7 +26,10 @@ DEFINE_PER_CPU(struct quicklist, quicklist)[CONFIG_NR_QUICK];
 static unsigned long max_pages(unsigned long min_pages)
 {
 	unsigned long node_free_pages, max;
-	struct zone *zones = NODE_DATA(numa_node_id())->node_zones;
+	int node = numa_node_id();
+	struct zone *zones = NODE_DATA(node)->node_zones;
+	int num_cpus_on_node;
+	node_to_cpumask_ptr(cpumask_on_node, node);
 
 	node_free_pages =
 #ifdef CONFIG_ZONE_DMA
@@ -38,6 +41,10 @@ static unsigned long max_pages(unsigned long min_pages)
 		zone_page_state(&zones[ZONE_NORMAL], NR_FREE_PAGES);
 
 	max = node_free_pages / FRACTION_OF_NODE_MEM;
+
+	num_cpus_on_node = cpus_weight_nr(*cpumask_on_node);
+	max /= num_cpus_on_node;
+
 	return max(max, min_pages);
 }
 
diff --git a/mm/readahead.c b/mm/readahead.c
index d8723a5f6496..77e8ddf945e9 100644
--- a/mm/readahead.c
+++ b/mm/readahead.c
@@ -382,9 +382,9 @@ ondemand_readahead(struct address_space *mapping,
 	if (hit_readahead_marker) {
 		pgoff_t start;
 
-		read_lock_irq(&mapping->tree_lock);
-		start = radix_tree_next_hole(&mapping->page_tree, offset, max+1);
-		read_unlock_irq(&mapping->tree_lock);
+		rcu_read_lock();
+		start = radix_tree_next_hole(&mapping->page_tree, offset,max+1);
+		rcu_read_unlock();
 
 		if (!start || start - offset > max)
 			return 0;
diff --git a/mm/rmap.c b/mm/rmap.c
index bf0a5b7cfb8e..0383acfcb068 100644
--- a/mm/rmap.c
+++ b/mm/rmap.c
@@ -49,6 +49,7 @@
 #include <linux/module.h>
 #include <linux/kallsyms.h>
 #include <linux/memcontrol.h>
+#include <linux/mmu_notifier.h>
 
 #include <asm/tlbflush.h>
 
@@ -138,7 +139,7 @@ void anon_vma_unlink(struct vm_area_struct *vma)
 		anon_vma_free(anon_vma);
 }
 
-static void anon_vma_ctor(struct kmem_cache *cachep, void *data)
+static void anon_vma_ctor(void *data)
 {
 	struct anon_vma *anon_vma = data;
 
@@ -223,10 +224,14 @@ unsigned long page_address_in_vma(struct page *page, struct vm_area_struct *vma)
 /*
  * Check that @page is mapped at @address into @mm.
  *
+ * If @sync is false, page_check_address may perform a racy check to avoid
+ * the page table lock when the pte is not present (helpful when reclaiming
+ * highly shared pages).
+ *
  * On success returns with pte mapped and locked.
  */
 pte_t *page_check_address(struct page *page, struct mm_struct *mm,
-			  unsigned long address, spinlock_t **ptlp)
+			  unsigned long address, spinlock_t **ptlp, int sync)
 {
 	pgd_t *pgd;
 	pud_t *pud;
@@ -248,7 +253,7 @@ pte_t *page_check_address(struct page *page, struct mm_struct *mm,
 
 	pte = pte_offset_map(pmd, address);
 	/* Make a quick check before getting the lock */
-	if (!pte_present(*pte)) {
+	if (!sync && !pte_present(*pte)) {
 		pte_unmap(pte);
 		return NULL;
 	}
@@ -280,14 +285,14 @@ static int page_referenced_one(struct page *page,
 	if (address == -EFAULT)
 		goto out;
 
-	pte = page_check_address(page, mm, address, &ptl);
+	pte = page_check_address(page, mm, address, &ptl, 0);
 	if (!pte)
 		goto out;
 
 	if (vma->vm_flags & VM_LOCKED) {
 		referenced++;
 		*mapcount = 1;	/* break early from loop */
-	} else if (ptep_clear_flush_young(vma, address, pte))
+	} else if (ptep_clear_flush_young_notify(vma, address, pte))
 		referenced++;
 
 	/* Pretend the page is referenced if the task has the
@@ -421,7 +426,7 @@ int page_referenced(struct page *page, int is_locked,
 			referenced += page_referenced_anon(page, mem_cont);
 		else if (is_locked)
 			referenced += page_referenced_file(page, mem_cont);
-		else if (TestSetPageLocked(page))
+		else if (!trylock_page(page))
 			referenced++;
 		else {
 			if (page->mapping)
@@ -449,7 +454,7 @@ static int page_mkclean_one(struct page *page, struct vm_area_struct *vma)
 	if (address == -EFAULT)
 		goto out;
 
-	pte = page_check_address(page, mm, address, &ptl);
+	pte = page_check_address(page, mm, address, &ptl, 1);
 	if (!pte)
 		goto out;
 
@@ -457,7 +462,7 @@ static int page_mkclean_one(struct page *page, struct vm_area_struct *vma)
 		pte_t entry;
 
 		flush_cache_page(vma, address, pte_pfn(*pte));
-		entry = ptep_clear_flush(vma, address, pte);
+		entry = ptep_clear_flush_notify(vma, address, pte);
 		entry = pte_wrprotect(entry);
 		entry = pte_mkclean(entry);
 		set_pte_at(mm, address, pte, entry);
@@ -576,14 +581,8 @@ void page_add_anon_rmap(struct page *page,
 	VM_BUG_ON(address < vma->vm_start || address >= vma->vm_end);
 	if (atomic_inc_and_test(&page->_mapcount))
 		__page_set_anon_rmap(page, vma, address);
-	else {
+	else
 		__page_check_anon_rmap(page, vma, address);
-		/*
-		 * We unconditionally charged during prepare, we uncharge here
-		 * This takes care of balancing the reference counts
-		 */
-		mem_cgroup_uncharge_page(page);
-	}
 }
 
 /**
@@ -614,12 +613,6 @@ void page_add_file_rmap(struct page *page)
 {
 	if (atomic_inc_and_test(&page->_mapcount))
 		__inc_zone_page_state(page, NR_FILE_MAPPED);
-	else
-		/*
-		 * We unconditionally charged during prepare, we uncharge here
-		 * This takes care of balancing the reference counts
-		 */
-		mem_cgroup_uncharge_page(page);
 }
 
 #ifdef CONFIG_DEBUG_VM
@@ -670,6 +663,22 @@ void page_remove_rmap(struct page *page, struct vm_area_struct *vma)
 		}
 
 		/*
+		 * Now that the last pte has gone, s390 must transfer dirty
+		 * flag from storage key to struct page.  We can usually skip
+		 * this if the page is anon, so about to be freed; but perhaps
+		 * not if it's in swapcache - there might be another pte slot
+		 * containing the swap entry, but page not yet written to swap.
+		 */
+		if ((!PageAnon(page) || PageSwapCache(page)) &&
+		    page_test_dirty(page)) {
+			page_clear_dirty(page);
+			set_page_dirty(page);
+		}
+
+		mem_cgroup_uncharge_page(page);
+		__dec_zone_page_state(page,
+			PageAnon(page) ? NR_ANON_PAGES : NR_FILE_MAPPED);
+		/*
 		 * It would be tidy to reset the PageAnon mapping here,
 		 * but that might overwrite a racing page_add_anon_rmap
 		 * which increments mapcount after us but sets mapping
@@ -678,14 +687,6 @@ void page_remove_rmap(struct page *page, struct vm_area_struct *vma)
 		 * Leaving it set also helps swapoff to reinstate ptes
 		 * faster for those pages still in swapcache.
 		 */
-		if (page_test_dirty(page)) {
-			page_clear_dirty(page);
-			set_page_dirty(page);
-		}
-		mem_cgroup_uncharge_page(page);
-
-		__dec_zone_page_state(page,
-				PageAnon(page) ? NR_ANON_PAGES : NR_FILE_MAPPED);
 	}
 }
 
@@ -707,7 +708,7 @@ static int try_to_unmap_one(struct page *page, struct vm_area_struct *vma,
 	if (address == -EFAULT)
 		goto out;
 
-	pte = page_check_address(page, mm, address, &ptl);
+	pte = page_check_address(page, mm, address, &ptl, 0);
 	if (!pte)
 		goto out;
 
@@ -717,14 +718,14 @@ static int try_to_unmap_one(struct page *page, struct vm_area_struct *vma,
 	 * skipped over this mm) then we should reactivate it.
 	 */
 	if (!migration && ((vma->vm_flags & VM_LOCKED) ||
-			(ptep_clear_flush_young(vma, address, pte)))) {
+			(ptep_clear_flush_young_notify(vma, address, pte)))) {
 		ret = SWAP_FAIL;
 		goto out_unmap;
 	}
 
 	/* Nuke the page table entry. */
 	flush_cache_page(vma, address, page_to_pfn(page));
-	pteval = ptep_clear_flush(vma, address, pte);
+	pteval = ptep_clear_flush_notify(vma, address, pte);
 
 	/* Move the dirty bit to the physical page now the pte is gone. */
 	if (pte_dirty(pteval))
@@ -849,12 +850,12 @@ static void try_to_unmap_cluster(unsigned long cursor,
 		page = vm_normal_page(vma, address, *pte);
 		BUG_ON(!page || PageAnon(page));
 
-		if (ptep_clear_flush_young(vma, address, pte))
+		if (ptep_clear_flush_young_notify(vma, address, pte))
 			continue;
 
 		/* Nuke the page table entry. */
 		flush_cache_page(vma, address, pte_pfn(*pte));
-		pteval = ptep_clear_flush(vma, address, pte);
+		pteval = ptep_clear_flush_notify(vma, address, pte);
 
 		/* If nonlinear, store the file page offset in the pte. */
 		if (page->index != linear_page_index(vma, address))
diff --git a/mm/shmem.c b/mm/shmem.c
index 9ffbea9b79e1..04fb4f1ab88e 100644
--- a/mm/shmem.c
+++ b/mm/shmem.c
@@ -922,20 +922,26 @@ found:
 	error = 1;
 	if (!inode)
 		goto out;
-	/* Precharge page while we can wait, compensate afterwards */
+	/* Precharge page using GFP_KERNEL while we can wait */
 	error = mem_cgroup_cache_charge(page, current->mm, GFP_KERNEL);
 	if (error)
 		goto out;
 	error = radix_tree_preload(GFP_KERNEL);
-	if (error)
-		goto uncharge;
+	if (error) {
+		mem_cgroup_uncharge_cache_page(page);
+		goto out;
+	}
 	error = 1;
 
 	spin_lock(&info->lock);
 	ptr = shmem_swp_entry(info, idx, NULL);
-	if (ptr && ptr->val == entry.val)
-		error = add_to_page_cache(page, inode->i_mapping,
+	if (ptr && ptr->val == entry.val) {
+		error = add_to_page_cache_locked(page, inode->i_mapping,
 						idx, GFP_NOWAIT);
+		/* does mem_cgroup_uncharge_cache_page on error */
+	} else	/* we must compensate for our precharge above */
+		mem_cgroup_uncharge_cache_page(page);
+
 	if (error == -EEXIST) {
 		struct page *filepage = find_get_page(inode->i_mapping, idx);
 		error = 1;
@@ -961,8 +967,6 @@ found:
 		shmem_swp_unmap(ptr);
 	spin_unlock(&info->lock);
 	radix_tree_preload_end();
-uncharge:
-	mem_cgroup_uncharge_page(page);
 out:
 	unlock_page(page);
 	page_cache_release(page);
@@ -1261,7 +1265,7 @@ repeat:
 		}
 
 		/* We have to do this with page locked to prevent races */
-		if (TestSetPageLocked(swappage)) {
+		if (!trylock_page(swappage)) {
 			shmem_swp_unmap(entry);
 			spin_unlock(&info->lock);
 			wait_on_page_locked(swappage);
@@ -1297,8 +1301,8 @@ repeat:
 			SetPageUptodate(filepage);
 			set_page_dirty(filepage);
 			swap_free(swap);
-		} else if (!(error = add_to_page_cache(
-				swappage, mapping, idx, GFP_NOWAIT))) {
+		} else if (!(error = add_to_page_cache_locked(swappage, mapping,
+					idx, GFP_NOWAIT))) {
 			info->flags |= SHMEM_PAGEIN;
 			shmem_swp_set(info, entry, 0);
 			shmem_swp_unmap(entry);
@@ -1311,24 +1315,21 @@ repeat:
 			shmem_swp_unmap(entry);
 			spin_unlock(&info->lock);
 			unlock_page(swappage);
+			page_cache_release(swappage);
 			if (error == -ENOMEM) {
 				/* allow reclaim from this memory cgroup */
-				error = mem_cgroup_cache_charge(swappage,
-					current->mm, gfp & ~__GFP_HIGHMEM);
-				if (error) {
-					page_cache_release(swappage);
+				error = mem_cgroup_shrink_usage(current->mm,
+								gfp);
+				if (error)
 					goto failed;
-				}
-				mem_cgroup_uncharge_page(swappage);
 			}
-			page_cache_release(swappage);
 			goto repeat;
 		}
 	} else if (sgp == SGP_READ && !filepage) {
 		shmem_swp_unmap(entry);
 		filepage = find_get_page(mapping, idx);
 		if (filepage &&
-		    (!PageUptodate(filepage) || TestSetPageLocked(filepage))) {
+		    (!PageUptodate(filepage) || !trylock_page(filepage))) {
 			spin_unlock(&info->lock);
 			wait_on_page_locked(filepage);
 			page_cache_release(filepage);
@@ -1358,6 +1359,8 @@ repeat:
 		}
 
 		if (!filepage) {
+			int ret;
+
 			spin_unlock(&info->lock);
 			filepage = shmem_alloc_page(gfp, info, idx);
 			if (!filepage) {
@@ -1386,10 +1389,18 @@ repeat:
 				swap = *entry;
 				shmem_swp_unmap(entry);
 			}
-			if (error || swap.val || 0 != add_to_page_cache_lru(
-					filepage, mapping, idx, GFP_NOWAIT)) {
+			ret = error || swap.val;
+			if (ret)
+				mem_cgroup_uncharge_cache_page(filepage);
+			else
+				ret = add_to_page_cache_lru(filepage, mapping,
+						idx, GFP_NOWAIT);
+			/*
+			 * At add_to_page_cache_lru() failure, uncharge will
+			 * be done automatically.
+			 */
+			if (ret) {
 				spin_unlock(&info->lock);
-				mem_cgroup_uncharge_page(filepage);
 				page_cache_release(filepage);
 				shmem_unacct_blocks(info->flags, 1);
 				shmem_free_blocks(inode, 1);
@@ -1398,7 +1409,6 @@ repeat:
 					goto failed;
 				goto repeat;
 			}
-			mem_cgroup_uncharge_page(filepage);
 			info->flags |= SHMEM_PAGEIN;
 		}
 
@@ -1503,7 +1513,6 @@ shmem_get_inode(struct super_block *sb, int mode, dev_t dev)
 		inode->i_uid = current->fsuid;
 		inode->i_gid = current->fsgid;
 		inode->i_blocks = 0;
-		inode->i_mapping->a_ops = &shmem_aops;
 		inode->i_mapping->backing_dev_info = &shmem_backing_dev_info;
 		inode->i_atime = inode->i_mtime = inode->i_ctime = CURRENT_TIME;
 		inode->i_generation = get_seconds();
@@ -1518,6 +1527,7 @@ shmem_get_inode(struct super_block *sb, int mode, dev_t dev)
 			init_special_inode(inode, mode, dev);
 			break;
 		case S_IFREG:
+			inode->i_mapping->a_ops = &shmem_aops;
 			inode->i_op = &shmem_inode_operations;
 			inode->i_fop = &shmem_file_operations;
 			mpol_shared_policy_init(&info->policy,
@@ -1919,6 +1929,7 @@ static int shmem_symlink(struct inode *dir, struct dentry *dentry, const char *s
 			return error;
 		}
 		unlock_page(page);
+		inode->i_mapping->a_ops = &shmem_aops;
 		inode->i_op = &shmem_symlink_inode_operations;
 		kaddr = kmap_atomic(page, KM_USER0);
 		memcpy(kaddr, symname, len);
@@ -2342,7 +2353,7 @@ static void shmem_destroy_inode(struct inode *inode)
 	kmem_cache_free(shmem_inode_cachep, SHMEM_I(inode));
 }
 
-static void init_once(struct kmem_cache *cachep, void *foo)
+static void init_once(void *foo)
 {
 	struct shmem_inode_info *p = (struct shmem_inode_info *) foo;
 
diff --git a/mm/shmem_acl.c b/mm/shmem_acl.c
index f5664c5b9eb1..8e5aadd7dcd6 100644
--- a/mm/shmem_acl.c
+++ b/mm/shmem_acl.c
@@ -191,7 +191,7 @@ shmem_check_acl(struct inode *inode, int mask)
  * shmem_permission  -  permission() inode operation
  */
 int
-shmem_permission(struct inode *inode, int mask, struct nameidata *nd)
+shmem_permission(struct inode *inode, int mask)
 {
 	return generic_permission(inode, mask, shmem_check_acl);
 }
diff --git a/mm/slab.c b/mm/slab.c
index 052e7d64537e..e76eee466886 100644
--- a/mm/slab.c
+++ b/mm/slab.c
@@ -406,7 +406,7 @@ struct kmem_cache {
 	unsigned int dflags;		/* dynamic flags */
 
 	/* constructor func */
-	void (*ctor)(struct kmem_cache *, void *);
+	void (*ctor)(void *obj);
 
 /* 5) cache creation/removal */
 	const char *name;
@@ -2137,8 +2137,7 @@ static int __init_refok setup_cpu_cache(struct kmem_cache *cachep)
  */
 struct kmem_cache *
 kmem_cache_create (const char *name, size_t size, size_t align,
-	unsigned long flags,
-	void (*ctor)(struct kmem_cache *, void *))
+	unsigned long flags, void (*ctor)(void *))
 {
 	size_t left_over, slab_size, ralign;
 	struct kmem_cache *cachep = NULL, *pc;
@@ -2653,7 +2652,7 @@ static void cache_init_objs(struct kmem_cache *cachep,
 		 * They must also be threaded.
 		 */
 		if (cachep->ctor && !(cachep->flags & SLAB_POISON))
-			cachep->ctor(cachep, objp + obj_offset(cachep));
+			cachep->ctor(objp + obj_offset(cachep));
 
 		if (cachep->flags & SLAB_RED_ZONE) {
 			if (*dbg_redzone2(cachep, objp) != RED_INACTIVE)
@@ -2669,7 +2668,7 @@ static void cache_init_objs(struct kmem_cache *cachep,
 					 cachep->buffer_size / PAGE_SIZE, 0);
 #else
 		if (cachep->ctor)
-			cachep->ctor(cachep, objp);
+			cachep->ctor(objp);
 #endif
 		slab_bufctl(slabp)[i] = i + 1;
 	}
@@ -3093,7 +3092,7 @@ static void *cache_alloc_debugcheck_after(struct kmem_cache *cachep,
 #endif
 	objp += obj_offset(cachep);
 	if (cachep->ctor && cachep->flags & SLAB_POISON)
-		cachep->ctor(cachep, objp);
+		cachep->ctor(objp);
 #if ARCH_SLAB_MINALIGN
 	if ((u32)objp & (ARCH_SLAB_MINALIGN-1)) {
 		printk(KERN_ERR "0x%p: not aligned to ARCH_SLAB_MINALIGN=%d\n",
@@ -4473,4 +4472,3 @@ size_t ksize(const void *objp)
 
 	return obj_size(virt_to_cache(objp));
 }
-EXPORT_SYMBOL(ksize);
diff --git a/mm/slob.c b/mm/slob.c
index de268eb7ac70..4c82dd41f32e 100644
--- a/mm/slob.c
+++ b/mm/slob.c
@@ -519,18 +519,16 @@ size_t ksize(const void *block)
 	else
 		return sp->page.private;
 }
-EXPORT_SYMBOL(ksize);
 
 struct kmem_cache {
 	unsigned int size, align;
 	unsigned long flags;
 	const char *name;
-	void (*ctor)(struct kmem_cache *, void *);
+	void (*ctor)(void *);
 };
 
 struct kmem_cache *kmem_cache_create(const char *name, size_t size,
-	size_t align, unsigned long flags,
-	void (*ctor)(struct kmem_cache *, void *))
+	size_t align, unsigned long flags, void (*ctor)(void *))
 {
 	struct kmem_cache *c;
 
@@ -575,7 +573,7 @@ void *kmem_cache_alloc_node(struct kmem_cache *c, gfp_t flags, int node)
 		b = slob_new_page(flags, get_order(c->size), node);
 
 	if (c->ctor)
-		c->ctor(c, b);
+		c->ctor(b);
 
 	return b;
 }
diff --git a/mm/slub.c b/mm/slub.c
index 77c21cf53ff9..fb486d5540f8 100644
--- a/mm/slub.c
+++ b/mm/slub.c
@@ -1012,7 +1012,7 @@ __setup("slub_debug", setup_slub_debug);
 
 static unsigned long kmem_cache_flags(unsigned long objsize,
 	unsigned long flags, const char *name,
-	void (*ctor)(struct kmem_cache *, void *))
+	void (*ctor)(void *))
 {
 	/*
 	 * Enable debugging if selected on the kernel commandline.
@@ -1040,7 +1040,7 @@ static inline int check_object(struct kmem_cache *s, struct page *page,
 static inline void add_full(struct kmem_cache_node *n, struct page *page) {}
 static inline unsigned long kmem_cache_flags(unsigned long objsize,
 	unsigned long flags, const char *name,
-	void (*ctor)(struct kmem_cache *, void *))
+	void (*ctor)(void *))
 {
 	return flags;
 }
@@ -1103,7 +1103,7 @@ static void setup_object(struct kmem_cache *s, struct page *page,
 {
 	setup_object_debug(s, page, object);
 	if (unlikely(s->ctor))
-		s->ctor(s, object);
+		s->ctor(object);
 }
 
 static struct page *new_slab(struct kmem_cache *s, gfp_t flags, int node)
@@ -1329,7 +1329,7 @@ static struct page *get_any_partial(struct kmem_cache *s, gfp_t flags)
 		n = get_node(s, zone_to_nid(zone));
 
 		if (n && cpuset_zone_allowed_hardwall(zone, flags) &&
-				n->nr_partial > MIN_PARTIAL) {
+				n->nr_partial > n->min_partial) {
 			page = get_partial_node(n);
 			if (page)
 				return page;
@@ -1381,7 +1381,7 @@ static void unfreeze_slab(struct kmem_cache *s, struct page *page, int tail)
 		slab_unlock(page);
 	} else {
 		stat(c, DEACTIVATE_EMPTY);
-		if (n->nr_partial < MIN_PARTIAL) {
+		if (n->nr_partial < n->min_partial) {
 			/*
 			 * Adding an empty slab to the partial slabs in order
 			 * to avoid page allocator overhead. This slab needs
@@ -1913,9 +1913,21 @@ static void init_kmem_cache_cpu(struct kmem_cache *s,
 #endif
 }
 
-static void init_kmem_cache_node(struct kmem_cache_node *n)
+static void
+init_kmem_cache_node(struct kmem_cache_node *n, struct kmem_cache *s)
 {
 	n->nr_partial = 0;
+
+	/*
+	 * The larger the object size is, the more pages we want on the partial
+	 * list to avoid pounding the page allocator excessively.
+	 */
+	n->min_partial = ilog2(s->size);
+	if (n->min_partial < MIN_PARTIAL)
+		n->min_partial = MIN_PARTIAL;
+	else if (n->min_partial > MAX_PARTIAL)
+		n->min_partial = MAX_PARTIAL;
+
 	spin_lock_init(&n->list_lock);
 	INIT_LIST_HEAD(&n->partial);
 #ifdef CONFIG_SLUB_DEBUG
@@ -2087,7 +2099,7 @@ static struct kmem_cache_node *early_kmem_cache_node_alloc(gfp_t gfpflags,
 	init_object(kmalloc_caches, n, 1);
 	init_tracking(kmalloc_caches, n);
 #endif
-	init_kmem_cache_node(n);
+	init_kmem_cache_node(n, kmalloc_caches);
 	inc_slabs_node(kmalloc_caches, node, page->objects);
 
 	/*
@@ -2144,7 +2156,7 @@ static int init_kmem_cache_nodes(struct kmem_cache *s, gfp_t gfpflags)
 
 		}
 		s->node[node] = n;
-		init_kmem_cache_node(n);
+		init_kmem_cache_node(n, s);
 	}
 	return 1;
 }
@@ -2155,7 +2167,7 @@ static void free_kmem_cache_nodes(struct kmem_cache *s)
 
 static int init_kmem_cache_nodes(struct kmem_cache *s, gfp_t gfpflags)
 {
-	init_kmem_cache_node(&s->local_node);
+	init_kmem_cache_node(&s->local_node, s);
 	return 1;
 }
 #endif
@@ -2286,7 +2298,7 @@ static int calculate_sizes(struct kmem_cache *s, int forced_order)
 static int kmem_cache_open(struct kmem_cache *s, gfp_t gfpflags,
 		const char *name, size_t size,
 		size_t align, unsigned long flags,
-		void (*ctor)(struct kmem_cache *, void *))
+		void (*ctor)(void *))
 {
 	memset(s, 0, kmem_size);
 	s->name = name;
@@ -2300,7 +2312,7 @@ static int kmem_cache_open(struct kmem_cache *s, gfp_t gfpflags,
 
 	s->refcount = 1;
 #ifdef CONFIG_NUMA
-	s->remote_node_defrag_ratio = 100;
+	s->remote_node_defrag_ratio = 1000;
 #endif
 	if (!init_kmem_cache_nodes(s, gfpflags & ~SLUB_DMA))
 		goto error;
@@ -2715,7 +2727,6 @@ size_t ksize(const void *object)
 	 */
 	return s->size;
 }
-EXPORT_SYMBOL(ksize);
 
 void kfree(const void *x)
 {
@@ -2890,7 +2901,7 @@ static int slab_mem_going_online_callback(void *arg)
 			ret = -ENOMEM;
 			goto out;
 		}
-		init_kmem_cache_node(n);
+		init_kmem_cache_node(n, s);
 		s->node[nid] = n;
 	}
 out:
@@ -3042,7 +3053,7 @@ static int slab_unmergeable(struct kmem_cache *s)
 
 static struct kmem_cache *find_mergeable(size_t size,
 		size_t align, unsigned long flags, const char *name,
-		void (*ctor)(struct kmem_cache *, void *))
+		void (*ctor)(void *))
 {
 	struct kmem_cache *s;
 
@@ -3082,8 +3093,7 @@ static struct kmem_cache *find_mergeable(size_t size,
 }
 
 struct kmem_cache *kmem_cache_create(const char *name, size_t size,
-		size_t align, unsigned long flags,
-		void (*ctor)(struct kmem_cache *, void *))
+		size_t align, unsigned long flags, void (*ctor)(void *))
 {
 	struct kmem_cache *s;
 
@@ -4048,7 +4058,7 @@ static ssize_t remote_node_defrag_ratio_store(struct kmem_cache *s,
 	if (err)
 		return err;
 
-	if (ratio < 100)
+	if (ratio <= 100)
 		s->remote_node_defrag_ratio = ratio * 10;
 
 	return length;
diff --git a/mm/sparse.c b/mm/sparse.c
index 8ffc08990008..39db301b920d 100644
--- a/mm/sparse.c
+++ b/mm/sparse.c
@@ -12,7 +12,6 @@
 #include <asm/dma.h>
 #include <asm/pgalloc.h>
 #include <asm/pgtable.h>
-#include "internal.h"
 
 /*
  * Permanent SPARSEMEM data:
@@ -377,7 +376,7 @@ struct page __init *sparse_mem_map_populate(unsigned long pnum, int nid)
 }
 #endif /* !CONFIG_SPARSEMEM_VMEMMAP */
 
-struct page __init *sparse_early_mem_map_alloc(unsigned long pnum)
+static struct page __init *sparse_early_mem_map_alloc(unsigned long pnum)
 {
 	struct page *map;
 	struct mem_section *ms = __nr_to_section(pnum);
diff --git a/mm/swap.c b/mm/swap.c
index dd89234ee51f..9e0cb3118079 100644
--- a/mm/swap.c
+++ b/mm/swap.c
@@ -278,9 +278,10 @@ int lru_add_drain_all(void)
  * Avoid taking zone->lru_lock if possible, but if it is taken, retain it
  * for the remainder of the operation.
  *
- * The locking in this function is against shrink_cache(): we recheck the
- * page count inside the lock to see whether shrink_cache grabbed the page
- * via the LRU.  If it did, give up: shrink_cache will free it.
+ * The locking in this function is against shrink_inactive_list(): we recheck
+ * the page count inside the lock to see whether shrink_inactive_list()
+ * grabbed the page via the LRU.  If it did, give up: shrink_inactive_list()
+ * will free it.
  */
 void release_pages(struct page **pages, int nr, int cold)
 {
@@ -443,7 +444,7 @@ void pagevec_strip(struct pagevec *pvec)
 	for (i = 0; i < pagevec_count(pvec); i++) {
 		struct page *page = pvec->pages[i];
 
-		if (PagePrivate(page) && !TestSetPageLocked(page)) {
+		if (PagePrivate(page) && trylock_page(page)) {
 			if (PagePrivate(page))
 				try_to_release_page(page, 0);
 			unlock_page(page);
diff --git a/mm/swap_state.c b/mm/swap_state.c
index d8aadaf2a0ba..797c3831cbec 100644
--- a/mm/swap_state.c
+++ b/mm/swap_state.c
@@ -39,7 +39,7 @@ static struct backing_dev_info swap_backing_dev_info = {
 
 struct address_space swapper_space = {
 	.page_tree	= RADIX_TREE_INIT(GFP_ATOMIC|__GFP_NOWARN),
-	.tree_lock	= __RW_LOCK_UNLOCKED(swapper_space.tree_lock),
+	.tree_lock	= __SPIN_LOCK_UNLOCKED(swapper_space.tree_lock),
 	.a_ops		= &swap_aops,
 	.i_mmap_nonlinear = LIST_HEAD_INIT(swapper_space.i_mmap_nonlinear),
 	.backing_dev_info = &swap_backing_dev_info,
@@ -56,15 +56,16 @@ static struct {
 
 void show_swap_cache_info(void)
 {
-	printk("Swap cache: add %lu, delete %lu, find %lu/%lu\n",
+	printk("%lu pages in swap cache\n", total_swapcache_pages);
+	printk("Swap cache stats: add %lu, delete %lu, find %lu/%lu\n",
 		swap_cache_info.add_total, swap_cache_info.del_total,
 		swap_cache_info.find_success, swap_cache_info.find_total);
-	printk("Free swap  = %lukB\n", nr_swap_pages << (PAGE_SHIFT - 10));
+	printk("Free swap  = %ldkB\n", nr_swap_pages << (PAGE_SHIFT - 10));
 	printk("Total swap = %lukB\n", total_swap_pages << (PAGE_SHIFT - 10));
 }
 
 /*
- * add_to_swap_cache resembles add_to_page_cache on swapper_space,
+ * add_to_swap_cache resembles add_to_page_cache_locked on swapper_space,
  * but sets SwapCache flag and private instead of mapping and index.
  */
 int add_to_swap_cache(struct page *page, swp_entry_t entry, gfp_t gfp_mask)
@@ -76,19 +77,26 @@ int add_to_swap_cache(struct page *page, swp_entry_t entry, gfp_t gfp_mask)
 	BUG_ON(PagePrivate(page));
 	error = radix_tree_preload(gfp_mask);
 	if (!error) {
-		write_lock_irq(&swapper_space.tree_lock);
+		page_cache_get(page);
+		SetPageSwapCache(page);
+		set_page_private(page, entry.val);
+
+		spin_lock_irq(&swapper_space.tree_lock);
 		error = radix_tree_insert(&swapper_space.page_tree,
 						entry.val, page);
-		if (!error) {
-			page_cache_get(page);
-			SetPageSwapCache(page);
-			set_page_private(page, entry.val);
+		if (likely(!error)) {
 			total_swapcache_pages++;
 			__inc_zone_page_state(page, NR_FILE_PAGES);
 			INC_CACHE_INFO(add_total);
 		}
-		write_unlock_irq(&swapper_space.tree_lock);
+		spin_unlock_irq(&swapper_space.tree_lock);
 		radix_tree_preload_end();
+
+		if (unlikely(error)) {
+			set_page_private(page, 0UL);
+			ClearPageSwapCache(page);
+			page_cache_release(page);
+		}
 	}
 	return error;
 }
@@ -175,9 +183,9 @@ void delete_from_swap_cache(struct page *page)
 
 	entry.val = page_private(page);
 
-	write_lock_irq(&swapper_space.tree_lock);
+	spin_lock_irq(&swapper_space.tree_lock);
 	__delete_from_swap_cache(page);
-	write_unlock_irq(&swapper_space.tree_lock);
+	spin_unlock_irq(&swapper_space.tree_lock);
 
 	swap_free(entry);
 	page_cache_release(page);
@@ -193,7 +201,7 @@ void delete_from_swap_cache(struct page *page)
  */
 static inline void free_swap_cache(struct page *page)
 {
-	if (PageSwapCache(page) && !TestSetPageLocked(page)) {
+	if (PageSwapCache(page) && trylock_page(page)) {
 		remove_exclusive_swap_page(page);
 		unlock_page(page);
 	}
@@ -294,9 +302,9 @@ struct page *read_swap_cache_async(swp_entry_t entry, gfp_t gfp_mask,
 		 * re-using the just freed swap entry for an existing page.
 		 * May fail (-ENOMEM) if radix-tree node allocation failed.
 		 */
-		SetPageLocked(new_page);
+		set_page_locked(new_page);
 		err = add_to_swap_cache(new_page, entry, gfp_mask & GFP_KERNEL);
-		if (!err) {
+		if (likely(!err)) {
 			/*
 			 * Initiate read into locked page and return.
 			 */
@@ -304,7 +312,7 @@ struct page *read_swap_cache_async(swp_entry_t entry, gfp_t gfp_mask,
 			swap_readpage(NULL, new_page);
 			return new_page;
 		}
-		ClearPageLocked(new_page);
+		clear_page_locked(new_page);
 		swap_free(entry);
 	} while (err != -ENOMEM);
 
diff --git a/mm/swapfile.c b/mm/swapfile.c
index 2f33edb8bee9..1e330f2998fa 100644
--- a/mm/swapfile.c
+++ b/mm/swapfile.c
@@ -33,8 +33,8 @@
 #include <asm/tlbflush.h>
 #include <linux/swapops.h>
 
-DEFINE_SPINLOCK(swap_lock);
-unsigned int nr_swapfiles;
+static DEFINE_SPINLOCK(swap_lock);
+static unsigned int nr_swapfiles;
 long total_swap_pages;
 static int swap_overflow;
 static int least_priority;
@@ -44,7 +44,7 @@ static const char Unused_file[] = "Unused swap file entry ";
 static const char Bad_offset[] = "Bad swap offset entry ";
 static const char Unused_offset[] = "Unused swap offset entry ";
 
-struct swap_list_t swap_list = {-1, -1};
+static struct swap_list_t swap_list = {-1, -1};
 
 static struct swap_info_struct swap_info[MAX_SWAPFILES];
 
@@ -369,13 +369,13 @@ int remove_exclusive_swap_page(struct page *page)
 	retval = 0;
 	if (p->swap_map[swp_offset(entry)] == 1) {
 		/* Recheck the page count with the swapcache lock held.. */
-		write_lock_irq(&swapper_space.tree_lock);
+		spin_lock_irq(&swapper_space.tree_lock);
 		if ((page_count(page) == 2) && !PageWriteback(page)) {
 			__delete_from_swap_cache(page);
 			SetPageDirty(page);
 			retval = 1;
 		}
-		write_unlock_irq(&swapper_space.tree_lock);
+		spin_unlock_irq(&swapper_space.tree_lock);
 	}
 	spin_unlock(&swap_lock);
 
@@ -403,7 +403,7 @@ void free_swap_and_cache(swp_entry_t entry)
 	if (p) {
 		if (swap_entry_free(p, swp_offset(entry)) == 1) {
 			page = find_get_page(&swapper_space, entry.val);
-			if (page && unlikely(TestSetPageLocked(page))) {
+			if (page && unlikely(!trylock_page(page))) {
 				page_cache_release(page);
 				page = NULL;
 			}
@@ -656,8 +656,8 @@ static int unuse_mm(struct mm_struct *mm,
 
 	if (!down_read_trylock(&mm->mmap_sem)) {
 		/*
-		 * Activate page so shrink_cache is unlikely to unmap its
-		 * ptes while lock is dropped, so swapoff can make progress.
+		 * Activate page so shrink_inactive_list is unlikely to unmap
+		 * its ptes while lock is dropped, so swapoff can make progress.
 		 */
 		activate_page(page);
 		unlock_page(page);
diff --git a/mm/truncate.c b/mm/truncate.c
index b8961cb63414..6650c1d878b4 100644
--- a/mm/truncate.c
+++ b/mm/truncate.c
@@ -104,7 +104,6 @@ truncate_complete_page(struct address_space *mapping, struct page *page)
 	cancel_dirty_page(page, PAGE_CACHE_SIZE);
 
 	remove_from_page_cache(page);
-	ClearPageUptodate(page);
 	ClearPageMappedToDisk(page);
 	page_cache_release(page);	/* pagecache ref */
 }
@@ -188,7 +187,7 @@ void truncate_inode_pages_range(struct address_space *mapping,
 			if (page_index > next)
 				next = page_index;
 			next++;
-			if (TestSetPageLocked(page))
+			if (!trylock_page(page))
 				continue;
 			if (PageWriteback(page)) {
 				unlock_page(page);
@@ -281,7 +280,7 @@ unsigned long __invalidate_mapping_pages(struct address_space *mapping,
 			pgoff_t index;
 			int lock_failed;
 
-			lock_failed = TestSetPageLocked(page);
+			lock_failed = !trylock_page(page);
 
 			/*
 			 * We really shouldn't be looking at the ->index of an
@@ -349,18 +348,17 @@ invalidate_complete_page2(struct address_space *mapping, struct page *page)
 	if (PagePrivate(page) && !try_to_release_page(page, GFP_KERNEL))
 		return 0;
 
-	write_lock_irq(&mapping->tree_lock);
+	spin_lock_irq(&mapping->tree_lock);
 	if (PageDirty(page))
 		goto failed;
 
 	BUG_ON(PagePrivate(page));
 	__remove_from_page_cache(page);
-	write_unlock_irq(&mapping->tree_lock);
-	ClearPageUptodate(page);
+	spin_unlock_irq(&mapping->tree_lock);
 	page_cache_release(page);	/* pagecache ref */
 	return 1;
 failed:
-	write_unlock_irq(&mapping->tree_lock);
+	spin_unlock_irq(&mapping->tree_lock);
 	return 0;
 }
 
@@ -382,7 +380,7 @@ static int do_launder_page(struct address_space *mapping, struct page *page)
  * Any pages which are found to be mapped into pagetables are unmapped prior to
  * invalidation.
  *
- * Returns -EIO if any pages could not be invalidated.
+ * Returns -EBUSY if any pages could not be invalidated.
  */
 int invalidate_inode_pages2_range(struct address_space *mapping,
 				  pgoff_t start, pgoff_t end)
@@ -442,7 +440,7 @@ int invalidate_inode_pages2_range(struct address_space *mapping,
 			ret2 = do_launder_page(mapping, page);
 			if (ret2 == 0) {
 				if (!invalidate_complete_page2(mapping, page))
-					ret2 = -EIO;
+					ret2 = -EBUSY;
 			}
 			if (ret2 < 0)
 				ret = ret2;
diff --git a/mm/util.c b/mm/util.c
index 8f18683825bc..cb00b748ce47 100644
--- a/mm/util.c
+++ b/mm/util.c
@@ -1,7 +1,9 @@
+#include <linux/mm.h>
 #include <linux/slab.h>
 #include <linux/string.h>
 #include <linux/module.h>
 #include <linux/err.h>
+#include <linux/sched.h>
 #include <asm/uaccess.h>
 
 /**
@@ -68,25 +70,22 @@ void *kmemdup(const void *src, size_t len, gfp_t gfp)
 EXPORT_SYMBOL(kmemdup);
 
 /**
- * krealloc - reallocate memory. The contents will remain unchanged.
+ * __krealloc - like krealloc() but don't free @p.
  * @p: object to reallocate memory for.
  * @new_size: how many bytes of memory are required.
  * @flags: the type of memory to allocate.
  *
- * The contents of the object pointed to are preserved up to the
- * lesser of the new and old sizes.  If @p is %NULL, krealloc()
- * behaves exactly like kmalloc().  If @size is 0 and @p is not a
- * %NULL pointer, the object pointed to is freed.
+ * This function is like krealloc() except it never frees the originally
+ * allocated buffer. Use this if you don't want to free the buffer immediately
+ * like, for example, with RCU.
  */
-void *krealloc(const void *p, size_t new_size, gfp_t flags)
+void *__krealloc(const void *p, size_t new_size, gfp_t flags)
 {
 	void *ret;
 	size_t ks = 0;
 
-	if (unlikely(!new_size)) {
-		kfree(p);
+	if (unlikely(!new_size))
 		return ZERO_SIZE_PTR;
-	}
 
 	if (p)
 		ks = ksize(p);
@@ -95,10 +94,37 @@ void *krealloc(const void *p, size_t new_size, gfp_t flags)
 		return (void *)p;
 
 	ret = kmalloc_track_caller(new_size, flags);
-	if (ret && p) {
+	if (ret && p)
 		memcpy(ret, p, ks);
+
+	return ret;
+}
+EXPORT_SYMBOL(__krealloc);
+
+/**
+ * krealloc - reallocate memory. The contents will remain unchanged.
+ * @p: object to reallocate memory for.
+ * @new_size: how many bytes of memory are required.
+ * @flags: the type of memory to allocate.
+ *
+ * The contents of the object pointed to are preserved up to the
+ * lesser of the new and old sizes.  If @p is %NULL, krealloc()
+ * behaves exactly like kmalloc().  If @size is 0 and @p is not a
+ * %NULL pointer, the object pointed to is freed.
+ */
+void *krealloc(const void *p, size_t new_size, gfp_t flags)
+{
+	void *ret;
+
+	if (unlikely(!new_size)) {
 		kfree(p);
+		return ZERO_SIZE_PTR;
 	}
+
+	ret = __krealloc(p, new_size, flags);
+	if (ret && p != ret)
+		kfree(p);
+
 	return ret;
 }
 EXPORT_SYMBOL(krealloc);
@@ -136,3 +162,27 @@ char *strndup_user(const char __user *s, long n)
 	return p;
 }
 EXPORT_SYMBOL(strndup_user);
+
+#ifndef HAVE_ARCH_PICK_MMAP_LAYOUT
+void arch_pick_mmap_layout(struct mm_struct *mm)
+{
+	mm->mmap_base = TASK_UNMAPPED_BASE;
+	mm->get_unmapped_area = arch_get_unmapped_area;
+	mm->unmap_area = arch_unmap_area;
+}
+#endif
+
+int __attribute__((weak)) get_user_pages_fast(unsigned long start,
+				int nr_pages, int write, struct page **pages)
+{
+	struct mm_struct *mm = current->mm;
+	int ret;
+
+	down_read(&mm->mmap_sem);
+	ret = get_user_pages(current, mm, start, nr_pages,
+					write, 0, pages, NULL);
+	up_read(&mm->mmap_sem);
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(get_user_pages_fast);
diff --git a/mm/vmalloc.c b/mm/vmalloc.c
index 35f293816294..85b9a0d2c877 100644
--- a/mm/vmalloc.c
+++ b/mm/vmalloc.c
@@ -381,16 +381,14 @@ static void __vunmap(const void *addr, int deallocate_pages)
 		return;
 
 	if ((PAGE_SIZE-1) & (unsigned long)addr) {
-		printk(KERN_ERR "Trying to vfree() bad address (%p)\n", addr);
-		WARN_ON(1);
+		WARN(1, KERN_ERR "Trying to vfree() bad address (%p)\n", addr);
 		return;
 	}
 
 	area = remove_vm_area(addr);
 	if (unlikely(!area)) {
-		printk(KERN_ERR "Trying to vfree() nonexistent vm area (%p)\n",
+		WARN(1, KERN_ERR "Trying to vfree() nonexistent vm area (%p)\n",
 				addr);
-		WARN_ON(1);
 		return;
 	}
 
diff --git a/mm/vmscan.c b/mm/vmscan.c
index 967d30ccd92b..1ff1a58e7c10 100644
--- a/mm/vmscan.c
+++ b/mm/vmscan.c
@@ -38,6 +38,7 @@
 #include <linux/kthread.h>
 #include <linux/freezer.h>
 #include <linux/memcontrol.h>
+#include <linux/delayacct.h>
 
 #include <asm/tlbflush.h>
 #include <asm/div64.h>
@@ -390,17 +391,15 @@ static pageout_t pageout(struct page *page, struct address_space *mapping,
 }
 
 /*
- * Attempt to detach a locked page from its ->mapping.  If it is dirty or if
- * someone else has a ref on the page, abort and return 0.  If it was
- * successfully detached, return 1.  Assumes the caller has a single ref on
- * this page.
+ * Same as remove_mapping, but if the page is removed from the mapping, it
+ * gets returned with a refcount of 0.
  */
-int remove_mapping(struct address_space *mapping, struct page *page)
+static int __remove_mapping(struct address_space *mapping, struct page *page)
 {
 	BUG_ON(!PageLocked(page));
 	BUG_ON(mapping != page_mapping(page));
 
-	write_lock_irq(&mapping->tree_lock);
+	spin_lock_irq(&mapping->tree_lock);
 	/*
 	 * The non racy check for a busy page.
 	 *
@@ -426,28 +425,48 @@ int remove_mapping(struct address_space *mapping, struct page *page)
 	 * Note that if SetPageDirty is always performed via set_page_dirty,
 	 * and thus under tree_lock, then this ordering is not required.
 	 */
-	if (unlikely(page_count(page) != 2))
+	if (!page_freeze_refs(page, 2))
 		goto cannot_free;
-	smp_rmb();
-	if (unlikely(PageDirty(page)))
+	/* note: atomic_cmpxchg in page_freeze_refs provides the smp_rmb */
+	if (unlikely(PageDirty(page))) {
+		page_unfreeze_refs(page, 2);
 		goto cannot_free;
+	}
 
 	if (PageSwapCache(page)) {
 		swp_entry_t swap = { .val = page_private(page) };
 		__delete_from_swap_cache(page);
-		write_unlock_irq(&mapping->tree_lock);
+		spin_unlock_irq(&mapping->tree_lock);
 		swap_free(swap);
-		__put_page(page);	/* The pagecache ref */
-		return 1;
+	} else {
+		__remove_from_page_cache(page);
+		spin_unlock_irq(&mapping->tree_lock);
 	}
 
-	__remove_from_page_cache(page);
-	write_unlock_irq(&mapping->tree_lock);
-	__put_page(page);
 	return 1;
 
 cannot_free:
-	write_unlock_irq(&mapping->tree_lock);
+	spin_unlock_irq(&mapping->tree_lock);
+	return 0;
+}
+
+/*
+ * Attempt to detach a locked page from its ->mapping.  If it is dirty or if
+ * someone else has a ref on the page, abort and return 0.  If it was
+ * successfully detached, return 1.  Assumes the caller has a single ref on
+ * this page.
+ */
+int remove_mapping(struct address_space *mapping, struct page *page)
+{
+	if (__remove_mapping(mapping, page)) {
+		/*
+		 * Unfreezing the refcount with 1 rather than 2 effectively
+		 * drops the pagecache ref for us without requiring another
+		 * atomic operation.
+		 */
+		page_unfreeze_refs(page, 1);
+		return 1;
+	}
 	return 0;
 }
 
@@ -477,7 +496,7 @@ static unsigned long shrink_page_list(struct list_head *page_list,
 		page = lru_to_page(page_list);
 		list_del(&page->lru);
 
-		if (TestSetPageLocked(page))
+		if (!trylock_page(page))
 			goto keep;
 
 		VM_BUG_ON(PageActive(page));
@@ -563,7 +582,7 @@ static unsigned long shrink_page_list(struct list_head *page_list,
 				 * A synchronous write - probably a ramdisk.  Go
 				 * ahead and try to reclaim the page.
 				 */
-				if (TestSetPageLocked(page))
+				if (!trylock_page(page))
 					goto keep;
 				if (PageDirty(page) || PageWriteback(page))
 					goto keep_locked;
@@ -597,18 +616,34 @@ static unsigned long shrink_page_list(struct list_head *page_list,
 		if (PagePrivate(page)) {
 			if (!try_to_release_page(page, sc->gfp_mask))
 				goto activate_locked;
-			if (!mapping && page_count(page) == 1)
-				goto free_it;
+			if (!mapping && page_count(page) == 1) {
+				unlock_page(page);
+				if (put_page_testzero(page))
+					goto free_it;
+				else {
+					/*
+					 * rare race with speculative reference.
+					 * the speculative reference will free
+					 * this page shortly, so we may
+					 * increment nr_reclaimed here (and
+					 * leave it off the LRU).
+					 */
+					nr_reclaimed++;
+					continue;
+				}
+			}
 		}
 
-		if (!mapping || !remove_mapping(mapping, page))
+		if (!mapping || !__remove_mapping(mapping, page))
 			goto keep_locked;
 
-free_it:
 		unlock_page(page);
+free_it:
 		nr_reclaimed++;
-		if (!pagevec_add(&freed_pvec, page))
-			__pagevec_release_nonlru(&freed_pvec);
+		if (!pagevec_add(&freed_pvec, page)) {
+			__pagevec_free(&freed_pvec);
+			pagevec_reinit(&freed_pvec);
+		}
 		continue;
 
 activate_locked:
@@ -622,7 +657,7 @@ keep:
 	}
 	list_splice(&ret_pages, page_list);
 	if (pagevec_count(&freed_pvec))
-		__pagevec_release_nonlru(&freed_pvec);
+		__pagevec_free(&freed_pvec);
 	count_vm_events(PGACTIVATE, pgactivate);
 	return nr_reclaimed;
 }
@@ -1316,6 +1351,8 @@ static unsigned long do_try_to_free_pages(struct zonelist *zonelist,
 	struct zone *zone;
 	enum zone_type high_zoneidx = gfp_zone(sc->gfp_mask);
 
+	delayacct_freepages_start();
+
 	if (scan_global_lru(sc))
 		count_vm_event(ALLOCSTALL);
 	/*
@@ -1371,7 +1408,7 @@ static unsigned long do_try_to_free_pages(struct zonelist *zonelist,
 		if (sc->nr_scanned && priority < DEF_PRIORITY - 2)
 			congestion_wait(WRITE, HZ/10);
 	}
-	/* top priority shrink_caches still had more to do? don't OOM, then */
+	/* top priority shrink_zones still had more to do? don't OOM, then */
 	if (!sc->all_unreclaimable && scan_global_lru(sc))
 		ret = nr_reclaimed;
 out:
@@ -1396,6 +1433,8 @@ out:
 	} else
 		mem_cgroup_record_reclaim_priority(sc->mem_cgroup, priority);
 
+	delayacct_freepages_end();
+
 	return ret;
 }
 
@@ -1940,7 +1979,7 @@ module_init(kswapd_init)
 int zone_reclaim_mode __read_mostly;
 
 #define RECLAIM_OFF 0
-#define RECLAIM_ZONE (1<<0)	/* Run shrink_cache on the zone */
+#define RECLAIM_ZONE (1<<0)	/* Run shrink_inactive_list on the zone */
 #define RECLAIM_WRITE (1<<1)	/* Writeout pages during reclaim */
 #define RECLAIM_SWAP (1<<2)	/* Swap pages out during reclaim */
 
diff --git a/mm/vmstat.c b/mm/vmstat.c
index b0d08e667ece..d7826af2fb07 100644
--- a/mm/vmstat.c
+++ b/mm/vmstat.c
@@ -516,9 +516,26 @@ static void pagetypeinfo_showblockcount_print(struct seq_file *m,
 			continue;
 
 		page = pfn_to_page(pfn);
+#ifdef CONFIG_ARCH_FLATMEM_HAS_HOLES
+		/*
+		 * Ordinarily, memory holes in flatmem still have a valid
+		 * memmap for the PFN range. However, an architecture for
+		 * embedded systems (e.g. ARM) can free up the memmap backing
+		 * holes to save memory on the assumption the memmap is
+		 * never used. The page_zone linkages are then broken even
+		 * though pfn_valid() returns true. Skip the page if the
+		 * linkages are broken. Even if this test passed, the impact
+		 * is that the counters for the movable type are off but
+		 * fragmentation monitoring is likely meaningless on small
+		 * systems.
+		 */
+		if (page_zone(page) != zone)
+			continue;
+#endif
 		mtype = get_pageblock_migratetype(page);
 
-		count[mtype]++;
+		if (mtype < MIGRATE_TYPES)
+			count[mtype]++;
 	}
 
 	/* Print counts */
diff --git a/net/802/psnap.c b/net/802/psnap.c
index ea4643931446..b3cfe5a14fca 100644
--- a/net/802/psnap.c
+++ b/net/802/psnap.c
@@ -31,11 +31,9 @@ static struct llc_sap *snap_sap;
  */
 static struct datalink_proto *find_snap_client(unsigned char *desc)
 {
-	struct list_head *entry;
 	struct datalink_proto *proto = NULL, *p;
 
-	list_for_each_rcu(entry, &snap_list) {
-		p = list_entry(entry, struct datalink_proto, node);
+	list_for_each_entry_rcu(p, &snap_list, node) {
 		if (!memcmp(p->type, desc, 5)) {
 			proto = p;
 			break;
diff --git a/net/Kconfig b/net/Kconfig
index b98668751749..7612cc8c337c 100644
--- a/net/Kconfig
+++ b/net/Kconfig
@@ -2,9 +2,7 @@
 # Network configuration
 #
 
-menu "Networking"
-
-config NET
+menuconfig NET
 	bool "Networking support"
 	---help---
 	  Unless you really know what you are doing, you should say Y here.
@@ -22,7 +20,6 @@ config NET
 	  recommended to read the NET-HOWTO, available from
 	  <http://www.tldp.org/docs.html#howto>.
 
-# Make sure that all config symbols are dependent on NET
 if NET
 
 menu "Networking options"
@@ -252,5 +249,3 @@ source "net/rfkill/Kconfig"
 source "net/9p/Kconfig"
 
 endif   # if NET
-endmenu # Networking
-
diff --git a/net/appletalk/ddp.c b/net/appletalk/ddp.c
index 07b5b82c5eab..0c850427a85b 100644
--- a/net/appletalk/ddp.c
+++ b/net/appletalk/ddp.c
@@ -959,7 +959,7 @@ static unsigned long atalk_sum_skb(const struct sk_buff *skb, int offset,
 	for (i = 0; i < skb_shinfo(skb)->nr_frags; i++) {
 		int end;
 
-		BUG_TRAP(start <= offset + len);
+		WARN_ON(start > offset + len);
 
 		end = start + skb_shinfo(skb)->frags[i].size;
 		if ((copy = end - offset) > 0) {
@@ -986,7 +986,7 @@ static unsigned long atalk_sum_skb(const struct sk_buff *skb, int offset,
 		for (; list; list = list->next) {
 			int end;
 
-			BUG_TRAP(start <= offset + len);
+			WARN_ON(start > offset + len);
 
 			end = start + list->len;
 			if ((copy = end - offset) > 0) {
diff --git a/net/atm/mpc.c b/net/atm/mpc.c
index 4fccaa1e07be..11b16d16661c 100644
--- a/net/atm/mpc.c
+++ b/net/atm/mpc.c
@@ -62,11 +62,13 @@ static void MPOA_cache_impos_rcvd(struct k_message *msg, struct mpoa_client *mpc
 static void set_mpc_ctrl_addr_rcvd(struct k_message *mesg, struct mpoa_client *mpc);
 static void set_mps_mac_addr_rcvd(struct k_message *mesg, struct mpoa_client *mpc);
 
-static uint8_t *copy_macs(struct mpoa_client *mpc, uint8_t *router_mac,
-			  uint8_t *tlvs, uint8_t mps_macs, uint8_t device_type);
+static const uint8_t *copy_macs(struct mpoa_client *mpc,
+				const uint8_t *router_mac,
+				const uint8_t *tlvs, uint8_t mps_macs,
+				uint8_t device_type);
 static void purge_egress_shortcut(struct atm_vcc *vcc, eg_cache_entry *entry);
 
-static void send_set_mps_ctrl_addr(char *addr, struct mpoa_client *mpc);
+static void send_set_mps_ctrl_addr(const char *addr, struct mpoa_client *mpc);
 static void mpoad_close(struct atm_vcc *vcc);
 static int msg_from_mpoad(struct atm_vcc *vcc, struct sk_buff *skb);
 
@@ -351,12 +353,12 @@ static const char *mpoa_device_type_string(char type)
  * lec sees a TLV it uses the pointer to call this function.
  *
  */
-static void lane2_assoc_ind(struct net_device *dev, uint8_t *mac_addr,
-			    uint8_t *tlvs, uint32_t sizeoftlvs)
+static void lane2_assoc_ind(struct net_device *dev, const u8 *mac_addr,
+			    const u8 *tlvs, u32 sizeoftlvs)
 {
 	uint32_t type;
 	uint8_t length, mpoa_device_type, number_of_mps_macs;
-	uint8_t *end_of_tlvs;
+	const uint8_t *end_of_tlvs;
 	struct mpoa_client *mpc;
 
 	mpoa_device_type = number_of_mps_macs = 0; /* silence gcc */
@@ -430,8 +432,10 @@ static void lane2_assoc_ind(struct net_device *dev, uint8_t *mac_addr,
  * plus the possible MAC address(es) to mpc->mps_macs.
  * For a freshly allocated MPOA client mpc->mps_macs == 0.
  */
-static uint8_t *copy_macs(struct mpoa_client *mpc, uint8_t *router_mac,
-			  uint8_t *tlvs, uint8_t mps_macs, uint8_t device_type)
+static const uint8_t *copy_macs(struct mpoa_client *mpc,
+				const uint8_t *router_mac,
+				const uint8_t *tlvs, uint8_t mps_macs,
+				uint8_t device_type)
 {
 	int num_macs;
 	num_macs = (mps_macs > 1) ? mps_macs : 1;
@@ -811,7 +815,7 @@ static int atm_mpoa_mpoad_attach (struct atm_vcc *vcc, int arg)
 	return arg;
 }
 
-static void send_set_mps_ctrl_addr(char *addr, struct mpoa_client *mpc)
+static void send_set_mps_ctrl_addr(const char *addr, struct mpoa_client *mpc)
 {
 	struct k_message mesg;
 
diff --git a/net/ax25/sysctl_net_ax25.c b/net/ax25/sysctl_net_ax25.c
index f597987b2424..f288fc4aef9b 100644
--- a/net/ax25/sysctl_net_ax25.c
+++ b/net/ax25/sysctl_net_ax25.c
@@ -36,6 +36,7 @@ static struct ctl_path ax25_path[] = {
 	{ .procname = "ax25", .ctl_name = NET_AX25, },
 	{ }
 };
+
 static const ctl_table ax25_param_table[] = {
 	{
 		.ctl_name	= NET_AX25_IP_DEFAULT_MODE,
@@ -167,6 +168,7 @@ static const ctl_table ax25_param_table[] = {
 		.extra1		= &min_proto,
 		.extra2		= &max_proto
 	},
+#ifdef CONFIG_AX25_DAMA_SLAVE
 	{
 		.ctl_name	= NET_AX25_DAMA_SLAVE_TIMEOUT,
 		.procname	= "dama_slave_timeout",
@@ -177,6 +179,8 @@ static const ctl_table ax25_param_table[] = {
 		.extra1		= &min_ds_timeout,
 		.extra2		= &max_ds_timeout
 	},
+#endif
+
 	{ .ctl_name = 0 }	/* that's all, folks! */
 };
 
@@ -210,16 +214,6 @@ void ax25_register_sysctl(void)
 		ax25_table[n].procname     = ax25_dev->dev->name;
 		ax25_table[n].mode         = 0555;
 
-#ifndef CONFIG_AX25_DAMA_SLAVE
-		/*
-		 * We do not wish to have a representation of this parameter
-		 * in /proc/sys/ when configured *not* to include the
-		 * AX.25 DAMA slave code, do we?
-		 */
-
-		child[AX25_VALUES_DS_TIMEOUT].procname = NULL;
-#endif
-
 		child[AX25_MAX_VALUES].ctl_name = 0;	/* just in case... */
 
 		for (k = 0; k < AX25_MAX_VALUES; k++)
diff --git a/net/bluetooth/af_bluetooth.c b/net/bluetooth/af_bluetooth.c
index 4e59df5f8e05..1edfdf4c095b 100644
--- a/net/bluetooth/af_bluetooth.c
+++ b/net/bluetooth/af_bluetooth.c
@@ -456,7 +456,7 @@ static void __exit bt_exit(void)
 subsys_initcall(bt_init);
 module_exit(bt_exit);
 
-MODULE_AUTHOR("Maxim Krasnyansky <maxk@qualcomm.com>, Marcel Holtmann <marcel@holtmann.org>");
+MODULE_AUTHOR("Marcel Holtmann <marcel@holtmann.org>");
 MODULE_DESCRIPTION("Bluetooth Core ver " VERSION);
 MODULE_VERSION(VERSION);
 MODULE_LICENSE("GPL");
diff --git a/net/bluetooth/bnep/core.c b/net/bluetooth/bnep/core.c
index 021172c0e666..80ba30cf4b68 100644
--- a/net/bluetooth/bnep/core.c
+++ b/net/bluetooth/bnep/core.c
@@ -57,7 +57,10 @@
 #define BT_DBG(D...)
 #endif
 
-#define VERSION "1.2"
+#define VERSION "1.3"
+
+static int compress_src = 1;
+static int compress_dst = 1;
 
 static LIST_HEAD(bnep_session_list);
 static DECLARE_RWSEM(bnep_session_sem);
@@ -418,10 +421,10 @@ static inline int bnep_tx_frame(struct bnep_session *s, struct sk_buff *skb)
 	iv[il++] = (struct kvec) { &type, 1 };
 	len++;
 
-	if (!compare_ether_addr(eh->h_dest, s->eh.h_source))
+	if (compress_src && !compare_ether_addr(eh->h_dest, s->eh.h_source))
 		type |= 0x01;
 
-	if (!compare_ether_addr(eh->h_source, s->eh.h_dest))
+	if (compress_dst && !compare_ether_addr(eh->h_source, s->eh.h_dest))
 		type |= 0x02;
 
 	if (type)
@@ -727,7 +730,13 @@ static void __exit bnep_exit(void)
 module_init(bnep_init);
 module_exit(bnep_exit);
 
-MODULE_AUTHOR("David Libault <david.libault@inventel.fr>, Maxim Krasnyansky <maxk@qualcomm.com>");
+module_param(compress_src, bool, 0644);
+MODULE_PARM_DESC(compress_src, "Compress sources headers");
+
+module_param(compress_dst, bool, 0644);
+MODULE_PARM_DESC(compress_dst, "Compress destination headers");
+
+MODULE_AUTHOR("Marcel Holtmann <marcel@holtmann.org>");
 MODULE_DESCRIPTION("Bluetooth BNEP ver " VERSION);
 MODULE_VERSION(VERSION);
 MODULE_LICENSE("GPL");
diff --git a/net/bluetooth/hci_sysfs.c b/net/bluetooth/hci_sysfs.c
index c85bf8f678dc..f4f6615cad9f 100644
--- a/net/bluetooth/hci_sysfs.c
+++ b/net/bluetooth/hci_sysfs.c
@@ -3,8 +3,6 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 
-#include <linux/platform_device.h>
-
 #include <net/bluetooth/bluetooth.h>
 #include <net/bluetooth/hci_core.h>
 
@@ -12,10 +10,164 @@
 #undef  BT_DBG
 #define BT_DBG(D...)
 #endif
+
+struct class *bt_class = NULL;
+EXPORT_SYMBOL_GPL(bt_class);
+
 static struct workqueue_struct *btaddconn;
 static struct workqueue_struct *btdelconn;
 
-static inline char *typetostr(int type)
+static inline char *link_typetostr(int type)
+{
+	switch (type) {
+	case ACL_LINK:
+		return "ACL";
+	case SCO_LINK:
+		return "SCO";
+	case ESCO_LINK:
+		return "eSCO";
+	default:
+		return "UNKNOWN";
+	}
+}
+
+static ssize_t show_link_type(struct device *dev, struct device_attribute *attr, char *buf)
+{
+	struct hci_conn *conn = dev_get_drvdata(dev);
+	return sprintf(buf, "%s\n", link_typetostr(conn->type));
+}
+
+static ssize_t show_link_address(struct device *dev, struct device_attribute *attr, char *buf)
+{
+	struct hci_conn *conn = dev_get_drvdata(dev);
+	bdaddr_t bdaddr;
+	baswap(&bdaddr, &conn->dst);
+	return sprintf(buf, "%s\n", batostr(&bdaddr));
+}
+
+static ssize_t show_link_features(struct device *dev, struct device_attribute *attr, char *buf)
+{
+	struct hci_conn *conn = dev_get_drvdata(dev);
+
+	return sprintf(buf, "0x%02x%02x%02x%02x%02x%02x%02x%02x\n",
+				conn->features[0], conn->features[1],
+				conn->features[2], conn->features[3],
+				conn->features[4], conn->features[5],
+				conn->features[6], conn->features[7]);
+}
+
+#define LINK_ATTR(_name,_mode,_show,_store) \
+struct device_attribute link_attr_##_name = __ATTR(_name,_mode,_show,_store)
+
+static LINK_ATTR(type, S_IRUGO, show_link_type, NULL);
+static LINK_ATTR(address, S_IRUGO, show_link_address, NULL);
+static LINK_ATTR(features, S_IRUGO, show_link_features, NULL);
+
+static struct attribute *bt_link_attrs[] = {
+	&link_attr_type.attr,
+	&link_attr_address.attr,
+	&link_attr_features.attr,
+	NULL
+};
+
+static struct attribute_group bt_link_group = {
+	.attrs = bt_link_attrs,
+};
+
+static struct attribute_group *bt_link_groups[] = {
+	&bt_link_group,
+	NULL
+};
+
+static void bt_link_release(struct device *dev)
+{
+	void *data = dev_get_drvdata(dev);
+	kfree(data);
+}
+
+static struct device_type bt_link = {
+	.name    = "link",
+	.groups  = bt_link_groups,
+	.release = bt_link_release,
+};
+
+static void add_conn(struct work_struct *work)
+{
+	struct hci_conn *conn = container_of(work, struct hci_conn, work);
+
+	flush_workqueue(btdelconn);
+
+	if (device_add(&conn->dev) < 0) {
+		BT_ERR("Failed to register connection device");
+		return;
+	}
+}
+
+void hci_conn_add_sysfs(struct hci_conn *conn)
+{
+	struct hci_dev *hdev = conn->hdev;
+
+	BT_DBG("conn %p", conn);
+
+	conn->dev.type = &bt_link;
+	conn->dev.class = bt_class;
+	conn->dev.parent = &hdev->dev;
+
+	snprintf(conn->dev.bus_id, BUS_ID_SIZE, "%s:%d",
+					hdev->name, conn->handle);
+
+	dev_set_drvdata(&conn->dev, conn);
+
+	device_initialize(&conn->dev);
+
+	INIT_WORK(&conn->work, add_conn);
+
+	queue_work(btaddconn, &conn->work);
+}
+
+/*
+ * The rfcomm tty device will possibly retain even when conn
+ * is down, and sysfs doesn't support move zombie device,
+ * so we should move the device before conn device is destroyed.
+ */
+static int __match_tty(struct device *dev, void *data)
+{
+	return !strncmp(dev->bus_id, "rfcomm", 6);
+}
+
+static void del_conn(struct work_struct *work)
+{
+	struct hci_conn *conn = container_of(work, struct hci_conn, work);
+	struct hci_dev *hdev = conn->hdev;
+
+	while (1) {
+		struct device *dev;
+
+		dev = device_find_child(&conn->dev, NULL, __match_tty);
+		if (!dev)
+			break;
+		device_move(dev, NULL);
+		put_device(dev);
+	}
+
+	device_del(&conn->dev);
+	put_device(&conn->dev);
+	hci_dev_put(hdev);
+}
+
+void hci_conn_del_sysfs(struct hci_conn *conn)
+{
+	BT_DBG("conn %p", conn);
+
+	if (!device_is_registered(&conn->dev))
+		return;
+
+	INIT_WORK(&conn->work, del_conn);
+
+	queue_work(btdelconn, &conn->work);
+}
+
+static inline char *host_typetostr(int type)
 {
 	switch (type) {
 	case HCI_VIRTUAL:
@@ -40,7 +192,7 @@ static inline char *typetostr(int type)
 static ssize_t show_type(struct device *dev, struct device_attribute *attr, char *buf)
 {
 	struct hci_dev *hdev = dev_get_drvdata(dev);
-	return sprintf(buf, "%s\n", typetostr(hdev->type));
+	return sprintf(buf, "%s\n", host_typetostr(hdev->type));
 }
 
 static ssize_t show_name(struct device *dev, struct device_attribute *attr, char *buf)
@@ -221,183 +373,62 @@ static DEVICE_ATTR(sniff_max_interval, S_IRUGO | S_IWUSR,
 static DEVICE_ATTR(sniff_min_interval, S_IRUGO | S_IWUSR,
 				show_sniff_min_interval, store_sniff_min_interval);
 
-static struct device_attribute *bt_attrs[] = {
-	&dev_attr_type,
-	&dev_attr_name,
-	&dev_attr_class,
-	&dev_attr_address,
-	&dev_attr_features,
-	&dev_attr_manufacturer,
-	&dev_attr_hci_version,
-	&dev_attr_hci_revision,
-	&dev_attr_inquiry_cache,
-	&dev_attr_idle_timeout,
-	&dev_attr_sniff_max_interval,
-	&dev_attr_sniff_min_interval,
+static struct attribute *bt_host_attrs[] = {
+	&dev_attr_type.attr,
+	&dev_attr_name.attr,
+	&dev_attr_class.attr,
+	&dev_attr_address.attr,
+	&dev_attr_features.attr,
+	&dev_attr_manufacturer.attr,
+	&dev_attr_hci_version.attr,
+	&dev_attr_hci_revision.attr,
+	&dev_attr_inquiry_cache.attr,
+	&dev_attr_idle_timeout.attr,
+	&dev_attr_sniff_max_interval.attr,
+	&dev_attr_sniff_min_interval.attr,
 	NULL
 };
 
-static ssize_t show_conn_type(struct device *dev, struct device_attribute *attr, char *buf)
-{
-	struct hci_conn *conn = dev_get_drvdata(dev);
-	return sprintf(buf, "%s\n", conn->type == ACL_LINK ? "ACL" : "SCO");
-}
-
-static ssize_t show_conn_address(struct device *dev, struct device_attribute *attr, char *buf)
-{
-	struct hci_conn *conn = dev_get_drvdata(dev);
-	bdaddr_t bdaddr;
-	baswap(&bdaddr, &conn->dst);
-	return sprintf(buf, "%s\n", batostr(&bdaddr));
-}
-
-static ssize_t show_conn_features(struct device *dev, struct device_attribute *attr, char *buf)
-{
-	struct hci_conn *conn = dev_get_drvdata(dev);
-
-	return sprintf(buf, "0x%02x%02x%02x%02x%02x%02x%02x%02x\n",
-				conn->features[0], conn->features[1],
-				conn->features[2], conn->features[3],
-				conn->features[4], conn->features[5],
-				conn->features[6], conn->features[7]);
-}
-
-#define CONN_ATTR(_name,_mode,_show,_store) \
-struct device_attribute conn_attr_##_name = __ATTR(_name,_mode,_show,_store)
-
-static CONN_ATTR(type, S_IRUGO, show_conn_type, NULL);
-static CONN_ATTR(address, S_IRUGO, show_conn_address, NULL);
-static CONN_ATTR(features, S_IRUGO, show_conn_features, NULL);
-
-static struct device_attribute *conn_attrs[] = {
-	&conn_attr_type,
-	&conn_attr_address,
-	&conn_attr_features,
-	NULL
+static struct attribute_group bt_host_group = {
+	.attrs = bt_host_attrs,
 };
 
-struct class *bt_class = NULL;
-EXPORT_SYMBOL_GPL(bt_class);
-
-static struct bus_type bt_bus = {
-	.name	= "bluetooth",
+static struct attribute_group *bt_host_groups[] = {
+	&bt_host_group,
+	NULL
 };
 
-static struct platform_device *bt_platform;
-
-static void bt_release(struct device *dev)
+static void bt_host_release(struct device *dev)
 {
 	void *data = dev_get_drvdata(dev);
 	kfree(data);
 }
 
-static void add_conn(struct work_struct *work)
-{
-	struct hci_conn *conn = container_of(work, struct hci_conn, work);
-	int i;
-
-	flush_workqueue(btdelconn);
-
-	if (device_add(&conn->dev) < 0) {
-		BT_ERR("Failed to register connection device");
-		return;
-	}
-
-	for (i = 0; conn_attrs[i]; i++)
-		if (device_create_file(&conn->dev, conn_attrs[i]) < 0)
-			BT_ERR("Failed to create connection attribute");
-}
-
-void hci_conn_add_sysfs(struct hci_conn *conn)
-{
-	struct hci_dev *hdev = conn->hdev;
-
-	BT_DBG("conn %p", conn);
-
-	conn->dev.bus = &bt_bus;
-	conn->dev.parent = &hdev->dev;
-
-	conn->dev.release = bt_release;
-
-	snprintf(conn->dev.bus_id, BUS_ID_SIZE, "%s:%d",
-					hdev->name, conn->handle);
-
-	dev_set_drvdata(&conn->dev, conn);
-
-	device_initialize(&conn->dev);
-
-	INIT_WORK(&conn->work, add_conn);
-
-	queue_work(btaddconn, &conn->work);
-}
-
-/*
- * The rfcomm tty device will possibly retain even when conn
- * is down, and sysfs doesn't support move zombie device,
- * so we should move the device before conn device is destroyed.
- */
-static int __match_tty(struct device *dev, void *data)
-{
-	return !strncmp(dev->bus_id, "rfcomm", 6);
-}
-
-static void del_conn(struct work_struct *work)
-{
-	struct hci_conn *conn = container_of(work, struct hci_conn, work);
-	struct hci_dev *hdev = conn->hdev;
-
-	while (1) {
-		struct device *dev;
-
-		dev = device_find_child(&conn->dev, NULL, __match_tty);
-		if (!dev)
-			break;
-		device_move(dev, NULL);
-		put_device(dev);
-	}
-
-	device_del(&conn->dev);
-	put_device(&conn->dev);
-	hci_dev_put(hdev);
-}
-
-void hci_conn_del_sysfs(struct hci_conn *conn)
-{
-	BT_DBG("conn %p", conn);
-
-	if (!device_is_registered(&conn->dev))
-		return;
-
-	INIT_WORK(&conn->work, del_conn);
-
-	queue_work(btdelconn, &conn->work);
-}
+static struct device_type bt_host = {
+	.name    = "host",
+	.groups  = bt_host_groups,
+	.release = bt_host_release,
+};
 
 int hci_register_sysfs(struct hci_dev *hdev)
 {
 	struct device *dev = &hdev->dev;
-	unsigned int i;
 	int err;
 
 	BT_DBG("%p name %s type %d", hdev, hdev->name, hdev->type);
 
-	dev->bus = &bt_bus;
+	dev->type = &bt_host;
+	dev->class = bt_class;
 	dev->parent = hdev->parent;
 
 	strlcpy(dev->bus_id, hdev->name, BUS_ID_SIZE);
 
-	dev->release = bt_release;
-
 	dev_set_drvdata(dev, hdev);
 
 	err = device_register(dev);
 	if (err < 0)
 		return err;
 
-	for (i = 0; bt_attrs[i]; i++)
-		if (device_create_file(dev, bt_attrs[i]) < 0)
-			BT_ERR("Failed to create device attribute");
-
 	return 0;
 }
 
@@ -410,59 +441,30 @@ void hci_unregister_sysfs(struct hci_dev *hdev)
 
 int __init bt_sysfs_init(void)
 {
-	int err;
-
 	btaddconn = create_singlethread_workqueue("btaddconn");
-	if (!btaddconn) {
-		err = -ENOMEM;
-		goto out;
-	}
+	if (!btaddconn)
+		return -ENOMEM;
 
 	btdelconn = create_singlethread_workqueue("btdelconn");
 	if (!btdelconn) {
-		err = -ENOMEM;
-		goto out_del;
-	}
-
-	bt_platform = platform_device_register_simple("bluetooth", -1, NULL, 0);
-	if (IS_ERR(bt_platform)) {
-		err = PTR_ERR(bt_platform);
-		goto out_platform;
+		destroy_workqueue(btaddconn);
+		return -ENOMEM;
 	}
 
-	err = bus_register(&bt_bus);
-	if (err < 0)
-		goto out_bus;
-
 	bt_class = class_create(THIS_MODULE, "bluetooth");
 	if (IS_ERR(bt_class)) {
-		err = PTR_ERR(bt_class);
-		goto out_class;
+		destroy_workqueue(btdelconn);
+		destroy_workqueue(btaddconn);
+		return PTR_ERR(bt_class);
 	}
 
 	return 0;
-
-out_class:
-	bus_unregister(&bt_bus);
-out_bus:
-	platform_device_unregister(bt_platform);
-out_platform:
-	destroy_workqueue(btdelconn);
-out_del:
-	destroy_workqueue(btaddconn);
-out:
-	return err;
 }
 
 void bt_sysfs_cleanup(void)
 {
 	destroy_workqueue(btaddconn);
-
 	destroy_workqueue(btdelconn);
 
 	class_destroy(bt_class);
-
-	bus_unregister(&bt_bus);
-
-	platform_device_unregister(bt_platform);
 }
diff --git a/net/bluetooth/l2cap.c b/net/bluetooth/l2cap.c
index c1239852834a..3396d5bdef1c 100644
--- a/net/bluetooth/l2cap.c
+++ b/net/bluetooth/l2cap.c
@@ -2516,7 +2516,7 @@ EXPORT_SYMBOL(l2cap_load);
 module_init(l2cap_init);
 module_exit(l2cap_exit);
 
-MODULE_AUTHOR("Maxim Krasnyansky <maxk@qualcomm.com>, Marcel Holtmann <marcel@holtmann.org>");
+MODULE_AUTHOR("Marcel Holtmann <marcel@holtmann.org>");
 MODULE_DESCRIPTION("Bluetooth L2CAP ver " VERSION);
 MODULE_VERSION(VERSION);
 MODULE_LICENSE("GPL");
diff --git a/net/bluetooth/rfcomm/core.c b/net/bluetooth/rfcomm/core.c
index 6cfc7ba611b3..ba537fae0a4c 100644
--- a/net/bluetooth/rfcomm/core.c
+++ b/net/bluetooth/rfcomm/core.c
@@ -2115,7 +2115,7 @@ MODULE_PARM_DESC(channel_mtu, "Default MTU for the RFCOMM channel");
 module_param(l2cap_mtu, uint, 0644);
 MODULE_PARM_DESC(l2cap_mtu, "Default MTU for the L2CAP connection");
 
-MODULE_AUTHOR("Maxim Krasnyansky <maxk@qualcomm.com>, Marcel Holtmann <marcel@holtmann.org>");
+MODULE_AUTHOR("Marcel Holtmann <marcel@holtmann.org>");
 MODULE_DESCRIPTION("Bluetooth RFCOMM ver " VERSION);
 MODULE_VERSION(VERSION);
 MODULE_LICENSE("GPL");
diff --git a/net/bluetooth/sco.c b/net/bluetooth/sco.c
index 8cda49874868..a16011fedc1d 100644
--- a/net/bluetooth/sco.c
+++ b/net/bluetooth/sco.c
@@ -1002,7 +1002,7 @@ module_exit(sco_exit);
 module_param(disable_esco, bool, 0644);
 MODULE_PARM_DESC(disable_esco, "Disable eSCO connection creation");
 
-MODULE_AUTHOR("Maxim Krasnyansky <maxk@qualcomm.com>, Marcel Holtmann <marcel@holtmann.org>");
+MODULE_AUTHOR("Marcel Holtmann <marcel@holtmann.org>");
 MODULE_DESCRIPTION("Bluetooth SCO ver " VERSION);
 MODULE_VERSION(VERSION);
 MODULE_LICENSE("GPL");
diff --git a/net/bridge/br_device.c b/net/bridge/br_device.c
index d9449df7cad5..4f52c3d50ebe 100644
--- a/net/bridge/br_device.c
+++ b/net/bridge/br_device.c
@@ -68,10 +68,17 @@ static int br_dev_stop(struct net_device *dev)
 
 static int br_change_mtu(struct net_device *dev, int new_mtu)
 {
-	if (new_mtu < 68 || new_mtu > br_min_mtu(netdev_priv(dev)))
+	struct net_bridge *br = netdev_priv(dev);
+	if (new_mtu < 68 || new_mtu > br_min_mtu(br))
 		return -EINVAL;
 
 	dev->mtu = new_mtu;
+
+#ifdef CONFIG_BRIDGE_NETFILTER
+	/* remember the MTU in the rtable for PMTU */
+	br->fake_rtable.u.dst.metrics[RTAX_MTU - 1] = new_mtu;
+#endif
+
 	return 0;
 }
 
@@ -141,11 +148,16 @@ static int br_set_tx_csum(struct net_device *dev, u32 data)
 }
 
 static struct ethtool_ops br_ethtool_ops = {
-	.get_drvinfo = br_getinfo,
-	.get_link = ethtool_op_get_link,
-	.set_sg = br_set_sg,
-	.set_tx_csum = br_set_tx_csum,
-	.set_tso = br_set_tso,
+	.get_drvinfo    = br_getinfo,
+	.get_link	= ethtool_op_get_link,
+	.get_tx_csum	= ethtool_op_get_tx_csum,
+	.set_tx_csum 	= br_set_tx_csum,
+	.get_sg		= ethtool_op_get_sg,
+	.set_sg		= br_set_sg,
+	.get_tso	= ethtool_op_get_tso,
+	.set_tso	= br_set_tso,
+	.get_ufo	= ethtool_op_get_ufo,
+	.get_flags	= ethtool_op_get_flags,
 };
 
 void br_dev_setup(struct net_device *dev)
diff --git a/net/bridge/br_if.c b/net/bridge/br_if.c
index a072ea5ca6f5..63c18aacde8c 100644
--- a/net/bridge/br_if.c
+++ b/net/bridge/br_if.c
@@ -202,6 +202,9 @@ static struct net_device *new_bridge_dev(const char *name)
 	br->topology_change = 0;
 	br->topology_change_detected = 0;
 	br->ageing_time = 300 * HZ;
+
+	br_netfilter_rtable_init(br);
+
 	INIT_LIST_HEAD(&br->age_list);
 
 	br_stp_timer_init(br);
diff --git a/net/bridge/br_netfilter.c b/net/bridge/br_netfilter.c
index bb90cd7bace3..6a9a6cd74b1e 100644
--- a/net/bridge/br_netfilter.c
+++ b/net/bridge/br_netfilter.c
@@ -101,33 +101,30 @@ static inline __be16 pppoe_proto(const struct sk_buff *skb)
 	 pppoe_proto(skb) == htons(PPP_IPV6) && \
 	 brnf_filter_pppoe_tagged)
 
-/* We need these fake structures to make netfilter happy --
- * lots of places assume that skb->dst != NULL, which isn't
- * all that unreasonable.
- *
+/*
+ * Initialize bogus route table used to keep netfilter happy.
  * Currently, we fill in the PMTU entry because netfilter
  * refragmentation needs it, and the rt_flags entry because
  * ipt_REJECT needs it.  Future netfilter modules might
- * require us to fill additional fields. */
-static struct net_device __fake_net_device = {
-	.hard_header_len	= ETH_HLEN,
-#ifdef CONFIG_NET_NS
-	.nd_net			= &init_net,
-#endif
-};
+ * require us to fill additional fields.
+ */
+void br_netfilter_rtable_init(struct net_bridge *br)
+{
+	struct rtable *rt = &br->fake_rtable;
 
-static struct rtable __fake_rtable = {
-	.u = {
-		.dst = {
-			.__refcnt		= ATOMIC_INIT(1),
-			.dev			= &__fake_net_device,
-			.path			= &__fake_rtable.u.dst,
-			.metrics		= {[RTAX_MTU - 1] = 1500},
-			.flags			= DST_NOXFRM,
-		}
-	},
-	.rt_flags	= 0,
-};
+	atomic_set(&rt->u.dst.__refcnt, 1);
+	rt->u.dst.dev = br->dev;
+	rt->u.dst.path = &rt->u.dst;
+	rt->u.dst.metrics[RTAX_MTU - 1] = 1500;
+	rt->u.dst.flags	= DST_NOXFRM;
+}
+
+static inline struct rtable *bridge_parent_rtable(const struct net_device *dev)
+{
+	struct net_bridge_port *port = rcu_dereference(dev->br_port);
+
+	return port ? &port->br->fake_rtable : NULL;
+}
 
 static inline struct net_device *bridge_parent(const struct net_device *dev)
 {
@@ -226,8 +223,12 @@ static int br_nf_pre_routing_finish_ipv6(struct sk_buff *skb)
 	}
 	nf_bridge->mask ^= BRNF_NF_BRIDGE_PREROUTING;
 
-	skb->rtable = &__fake_rtable;
-	dst_hold(&__fake_rtable.u.dst);
+	skb->rtable = bridge_parent_rtable(nf_bridge->physindev);
+	if (!skb->rtable) {
+		kfree_skb(skb);
+		return 0;
+	}
+	dst_hold(&skb->rtable->u.dst);
 
 	skb->dev = nf_bridge->physindev;
 	nf_bridge_push_encap_header(skb);
@@ -391,8 +392,12 @@ bridged_dnat:
 			skb->pkt_type = PACKET_HOST;
 		}
 	} else {
-		skb->rtable = &__fake_rtable;
-		dst_hold(&__fake_rtable.u.dst);
+		skb->rtable = bridge_parent_rtable(nf_bridge->physindev);
+		if (!skb->rtable) {
+			kfree_skb(skb);
+			return 0;
+		}
+		dst_hold(&skb->rtable->u.dst);
 	}
 
 	skb->dev = nf_bridge->physindev;
@@ -611,8 +616,8 @@ static unsigned int br_nf_local_in(unsigned int hook, struct sk_buff *skb,
 				   const struct net_device *out,
 				   int (*okfn)(struct sk_buff *))
 {
-	if (skb->rtable == &__fake_rtable) {
-		dst_release(&__fake_rtable.u.dst);
+	if (skb->rtable && skb->rtable == bridge_parent_rtable(in)) {
+		dst_release(&skb->rtable->u.dst);
 		skb->rtable = NULL;
 	}
 
diff --git a/net/bridge/br_private.h b/net/bridge/br_private.h
index 815ed38925b2..c3dc18ddc043 100644
--- a/net/bridge/br_private.h
+++ b/net/bridge/br_private.h
@@ -15,6 +15,7 @@
 
 #include <linux/netdevice.h>
 #include <linux/if_bridge.h>
+#include <net/route.h>
 
 #define BR_HASH_BITS 8
 #define BR_HASH_SIZE (1 << BR_HASH_BITS)
@@ -92,6 +93,9 @@ struct net_bridge
 	struct hlist_head		hash[BR_HASH_SIZE];
 	struct list_head		age_list;
 	unsigned long			feature_mask;
+#ifdef CONFIG_BRIDGE_NETFILTER
+	struct rtable 			fake_rtable;
+#endif
 	unsigned long			flags;
 #define BR_SET_MAC_ADDR		0x00000001
 
@@ -197,9 +201,11 @@ extern int br_ioctl_deviceless_stub(struct net *net, unsigned int cmd, void __us
 #ifdef CONFIG_BRIDGE_NETFILTER
 extern int br_netfilter_init(void);
 extern void br_netfilter_fini(void);
+extern void br_netfilter_rtable_init(struct net_bridge *);
 #else
 #define br_netfilter_init()	(0)
 #define br_netfilter_fini()	do { } while(0)
+#define br_netfilter_rtable_init(x)
 #endif
 
 /* br_stp.c */
diff --git a/net/bridge/br_stp.c b/net/bridge/br_stp.c
index 921bbe5cb94a..6e63ec3f1fcf 100644
--- a/net/bridge/br_stp.c
+++ b/net/bridge/br_stp.c
@@ -368,14 +368,25 @@ static void br_make_blocking(struct net_bridge_port *p)
 /* called under bridge lock */
 static void br_make_forwarding(struct net_bridge_port *p)
 {
-	if (p->state == BR_STATE_BLOCKING) {
-		if (p->br->stp_enabled == BR_KERNEL_STP)
-			p->state = BR_STATE_LISTENING;
-		else
-			p->state = BR_STATE_LEARNING;
+	struct net_bridge *br = p->br;
 
-		br_log_state(p);
-		mod_timer(&p->forward_delay_timer, jiffies + p->br->forward_delay);	}
+	if (p->state != BR_STATE_BLOCKING)
+		return;
+
+	if (br->forward_delay == 0) {
+		p->state = BR_STATE_FORWARDING;
+		br_topology_change_detection(br);
+		del_timer(&p->forward_delay_timer);
+	}
+	else if (p->br->stp_enabled == BR_KERNEL_STP)
+		p->state = BR_STATE_LISTENING;
+	else
+		p->state = BR_STATE_LEARNING;
+
+	br_log_state(p);
+
+	if (br->forward_delay != 0)
+		mod_timer(&p->forward_delay_timer, jiffies + br->forward_delay);
 }
 
 /* called under bridge lock */
diff --git a/net/bridge/netfilter/ebtable_filter.c b/net/bridge/netfilter/ebtable_filter.c
index 690bc3ab186c..1a58af51a2e2 100644
--- a/net/bridge/netfilter/ebtable_filter.c
+++ b/net/bridge/netfilter/ebtable_filter.c
@@ -93,28 +93,20 @@ static struct nf_hook_ops ebt_ops_filter[] __read_mostly = {
 
 static int __init ebtable_filter_init(void)
 {
-	int i, j, ret;
+	int ret;
 
 	ret = ebt_register_table(&frame_filter);
 	if (ret < 0)
 		return ret;
-	for (i = 0; i < ARRAY_SIZE(ebt_ops_filter); i++)
-		if ((ret = nf_register_hook(&ebt_ops_filter[i])) < 0)
-			goto cleanup;
-	return ret;
-cleanup:
-	for (j = 0; j < i; j++)
-		nf_unregister_hook(&ebt_ops_filter[j]);
-	ebt_unregister_table(&frame_filter);
+	ret = nf_register_hooks(ebt_ops_filter, ARRAY_SIZE(ebt_ops_filter));
+	if (ret < 0)
+		ebt_unregister_table(&frame_filter);
 	return ret;
 }
 
 static void __exit ebtable_filter_fini(void)
 {
-	int i;
-
-	for (i = 0; i < ARRAY_SIZE(ebt_ops_filter); i++)
-		nf_unregister_hook(&ebt_ops_filter[i]);
+	nf_unregister_hooks(ebt_ops_filter, ARRAY_SIZE(ebt_ops_filter));
 	ebt_unregister_table(&frame_filter);
 }
 
diff --git a/net/bridge/netfilter/ebtable_nat.c b/net/bridge/netfilter/ebtable_nat.c
index 5b495fe2d0b6..f60c1e78e575 100644
--- a/net/bridge/netfilter/ebtable_nat.c
+++ b/net/bridge/netfilter/ebtable_nat.c
@@ -100,28 +100,20 @@ static struct nf_hook_ops ebt_ops_nat[] __read_mostly = {
 
 static int __init ebtable_nat_init(void)
 {
-	int i, ret, j;
+	int ret;
 
 	ret = ebt_register_table(&frame_nat);
 	if (ret < 0)
 		return ret;
-	for (i = 0; i < ARRAY_SIZE(ebt_ops_nat); i++)
-		if ((ret = nf_register_hook(&ebt_ops_nat[i])) < 0)
-			goto cleanup;
-	return ret;
-cleanup:
-	for (j = 0; j < i; j++)
-		nf_unregister_hook(&ebt_ops_nat[j]);
-	ebt_unregister_table(&frame_nat);
+	ret = nf_register_hooks(ebt_ops_nat, ARRAY_SIZE(ebt_ops_nat));
+	if (ret < 0)
+		ebt_unregister_table(&frame_nat);
 	return ret;
 }
 
 static void __exit ebtable_nat_fini(void)
 {
-	int i;
-
-	for (i = 0; i < ARRAY_SIZE(ebt_ops_nat); i++)
-		nf_unregister_hook(&ebt_ops_nat[i]);
+	nf_unregister_hooks(ebt_ops_nat, ARRAY_SIZE(ebt_ops_nat));
 	ebt_unregister_table(&frame_nat);
 }
 
diff --git a/net/core/datagram.c b/net/core/datagram.c
index 8a28fc93b724..52f577a0f544 100644
--- a/net/core/datagram.c
+++ b/net/core/datagram.c
@@ -285,7 +285,7 @@ int skb_copy_datagram_iovec(const struct sk_buff *skb, int offset,
 	for (i = 0; i < skb_shinfo(skb)->nr_frags; i++) {
 		int end;
 
-		BUG_TRAP(start <= offset + len);
+		WARN_ON(start > offset + len);
 
 		end = start + skb_shinfo(skb)->frags[i].size;
 		if ((copy = end - offset) > 0) {
@@ -315,7 +315,7 @@ int skb_copy_datagram_iovec(const struct sk_buff *skb, int offset,
 		for (; list; list = list->next) {
 			int end;
 
-			BUG_TRAP(start <= offset + len);
+			WARN_ON(start > offset + len);
 
 			end = start + list->len;
 			if ((copy = end - offset) > 0) {
@@ -339,6 +339,93 @@ fault:
 	return -EFAULT;
 }
 
+/**
+ *	skb_copy_datagram_from_iovec - Copy a datagram from an iovec.
+ *	@skb: buffer to copy
+ *	@offset: offset in the buffer to start copying to
+ *	@from: io vector to copy to
+ *	@len: amount of data to copy to buffer from iovec
+ *
+ *	Returns 0 or -EFAULT.
+ *	Note: the iovec is modified during the copy.
+ */
+int skb_copy_datagram_from_iovec(struct sk_buff *skb, int offset,
+				 struct iovec *from, int len)
+{
+	int start = skb_headlen(skb);
+	int i, copy = start - offset;
+
+	/* Copy header. */
+	if (copy > 0) {
+		if (copy > len)
+			copy = len;
+		if (memcpy_fromiovec(skb->data + offset, from, copy))
+			goto fault;
+		if ((len -= copy) == 0)
+			return 0;
+		offset += copy;
+	}
+
+	/* Copy paged appendix. Hmm... why does this look so complicated? */
+	for (i = 0; i < skb_shinfo(skb)->nr_frags; i++) {
+		int end;
+
+		WARN_ON(start > offset + len);
+
+		end = start + skb_shinfo(skb)->frags[i].size;
+		if ((copy = end - offset) > 0) {
+			int err;
+			u8  *vaddr;
+			skb_frag_t *frag = &skb_shinfo(skb)->frags[i];
+			struct page *page = frag->page;
+
+			if (copy > len)
+				copy = len;
+			vaddr = kmap(page);
+			err = memcpy_fromiovec(vaddr + frag->page_offset +
+					       offset - start, from, copy);
+			kunmap(page);
+			if (err)
+				goto fault;
+
+			if (!(len -= copy))
+				return 0;
+			offset += copy;
+		}
+		start = end;
+	}
+
+	if (skb_shinfo(skb)->frag_list) {
+		struct sk_buff *list = skb_shinfo(skb)->frag_list;
+
+		for (; list; list = list->next) {
+			int end;
+
+			WARN_ON(start > offset + len);
+
+			end = start + list->len;
+			if ((copy = end - offset) > 0) {
+				if (copy > len)
+					copy = len;
+				if (skb_copy_datagram_from_iovec(list,
+								 offset - start,
+								 from, copy))
+					goto fault;
+				if ((len -= copy) == 0)
+					return 0;
+				offset += copy;
+			}
+			start = end;
+		}
+	}
+	if (!len)
+		return 0;
+
+fault:
+	return -EFAULT;
+}
+EXPORT_SYMBOL(skb_copy_datagram_from_iovec);
+
 static int skb_copy_and_csum_datagram(const struct sk_buff *skb, int offset,
 				      u8 __user *to, int len,
 				      __wsum *csump)
@@ -366,7 +453,7 @@ static int skb_copy_and_csum_datagram(const struct sk_buff *skb, int offset,
 	for (i = 0; i < skb_shinfo(skb)->nr_frags; i++) {
 		int end;
 
-		BUG_TRAP(start <= offset + len);
+		WARN_ON(start > offset + len);
 
 		end = start + skb_shinfo(skb)->frags[i].size;
 		if ((copy = end - offset) > 0) {
@@ -402,7 +489,7 @@ static int skb_copy_and_csum_datagram(const struct sk_buff *skb, int offset,
 		for (; list; list=list->next) {
 			int end;
 
-			BUG_TRAP(start <= offset + len);
+			WARN_ON(start > offset + len);
 
 			end = start + list->len;
 			if ((copy = end - offset) > 0) {
diff --git a/net/core/dev.c b/net/core/dev.c
index 53af7841018a..60c51f765887 100644
--- a/net/core/dev.c
+++ b/net/core/dev.c
@@ -1339,19 +1339,23 @@ static void dev_queue_xmit_nit(struct sk_buff *skb, struct net_device *dev)
 }
 
 
-void __netif_schedule(struct Qdisc *q)
+static inline void __netif_reschedule(struct Qdisc *q)
 {
-	if (!test_and_set_bit(__QDISC_STATE_SCHED, &q->state)) {
-		struct softnet_data *sd;
-		unsigned long flags;
+	struct softnet_data *sd;
+	unsigned long flags;
 
-		local_irq_save(flags);
-		sd = &__get_cpu_var(softnet_data);
-		q->next_sched = sd->output_queue;
-		sd->output_queue = q;
-		raise_softirq_irqoff(NET_TX_SOFTIRQ);
-		local_irq_restore(flags);
-	}
+	local_irq_save(flags);
+	sd = &__get_cpu_var(softnet_data);
+	q->next_sched = sd->output_queue;
+	sd->output_queue = q;
+	raise_softirq_irqoff(NET_TX_SOFTIRQ);
+	local_irq_restore(flags);
+}
+
+void __netif_schedule(struct Qdisc *q)
+{
+	if (!test_and_set_bit(__QDISC_STATE_SCHED, &q->state))
+		__netif_reschedule(q);
 }
 EXPORT_SYMBOL(__netif_schedule);
 
@@ -1796,16 +1800,19 @@ gso:
 	skb->tc_verd = SET_TC_AT(skb->tc_verd,AT_EGRESS);
 #endif
 	if (q->enqueue) {
-		spinlock_t *root_lock = qdisc_root_lock(q);
+		spinlock_t *root_lock = qdisc_lock(q);
 
 		spin_lock(root_lock);
 
-		rc = qdisc_enqueue_root(skb, q);
-		qdisc_run(q);
-
+		if (unlikely(test_bit(__QDISC_STATE_DEACTIVATED, &q->state))) {
+			kfree_skb(skb);
+			rc = NET_XMIT_DROP;
+		} else {
+			rc = qdisc_enqueue_root(skb, q);
+			qdisc_run(q);
+		}
 		spin_unlock(root_lock);
 
-		rc = rc == NET_XMIT_BYPASS ? NET_XMIT_SUCCESS : rc;
 		goto out;
 	}
 
@@ -1909,7 +1916,6 @@ int netif_rx(struct sk_buff *skb)
 	if (queue->input_pkt_queue.qlen <= netdev_max_backlog) {
 		if (queue->input_pkt_queue.qlen) {
 enqueue:
-			dev_hold(skb->dev);
 			__skb_queue_tail(&queue->input_pkt_queue, skb);
 			local_irq_restore(flags);
 			return NET_RX_SUCCESS;
@@ -1941,22 +1947,6 @@ int netif_rx_ni(struct sk_buff *skb)
 
 EXPORT_SYMBOL(netif_rx_ni);
 
-static inline struct net_device *skb_bond(struct sk_buff *skb)
-{
-	struct net_device *dev = skb->dev;
-
-	if (dev->master) {
-		if (skb_bond_should_drop(skb)) {
-			kfree_skb(skb);
-			return NULL;
-		}
-		skb->dev = dev->master;
-	}
-
-	return dev;
-}
-
-
 static void net_tx_action(struct softirq_action *h)
 {
 	struct softnet_data *sd = &__get_cpu_var(softnet_data);
@@ -1973,7 +1963,7 @@ static void net_tx_action(struct softirq_action *h)
 			struct sk_buff *skb = clist;
 			clist = clist->next;
 
-			BUG_TRAP(!atomic_read(&skb->users));
+			WARN_ON(atomic_read(&skb->users));
 			__kfree_skb(skb);
 		}
 	}
@@ -1992,15 +1982,17 @@ static void net_tx_action(struct softirq_action *h)
 
 			head = head->next_sched;
 
-			smp_mb__before_clear_bit();
-			clear_bit(__QDISC_STATE_SCHED, &q->state);
-
-			root_lock = qdisc_root_lock(q);
+			root_lock = qdisc_lock(q);
 			if (spin_trylock(root_lock)) {
+				smp_mb__before_clear_bit();
+				clear_bit(__QDISC_STATE_SCHED,
+					  &q->state);
 				qdisc_run(q);
 				spin_unlock(root_lock);
 			} else {
-				__netif_schedule(q);
+				if (!test_bit(__QDISC_STATE_DEACTIVATED,
+					      &q->state))
+					__netif_reschedule(q);
 			}
 		}
 	}
@@ -2100,9 +2092,10 @@ static int ing_filter(struct sk_buff *skb)
 	rxq = &dev->rx_queue;
 
 	q = rxq->qdisc;
-	if (q) {
+	if (q != &noop_qdisc) {
 		spin_lock(qdisc_lock(q));
-		result = qdisc_enqueue_root(skb, q);
+		if (likely(!test_bit(__QDISC_STATE_DEACTIVATED, &q->state)))
+			result = qdisc_enqueue_root(skb, q);
 		spin_unlock(qdisc_lock(q));
 	}
 
@@ -2113,7 +2106,7 @@ static inline struct sk_buff *handle_ing(struct sk_buff *skb,
 					 struct packet_type **pt_prev,
 					 int *ret, struct net_device *orig_dev)
 {
-	if (!skb->dev->rx_queue.qdisc)
+	if (skb->dev->rx_queue.qdisc == &noop_qdisc)
 		goto out;
 
 	if (*pt_prev) {
@@ -2183,6 +2176,7 @@ int netif_receive_skb(struct sk_buff *skb)
 {
 	struct packet_type *ptype, *pt_prev;
 	struct net_device *orig_dev;
+	struct net_device *null_or_orig;
 	int ret = NET_RX_DROP;
 	__be16 type;
 
@@ -2196,10 +2190,14 @@ int netif_receive_skb(struct sk_buff *skb)
 	if (!skb->iif)
 		skb->iif = skb->dev->ifindex;
 
-	orig_dev = skb_bond(skb);
-
-	if (!orig_dev)
-		return NET_RX_DROP;
+	null_or_orig = NULL;
+	orig_dev = skb->dev;
+	if (orig_dev->master) {
+		if (skb_bond_should_drop(skb))
+			null_or_orig = orig_dev; /* deliver only exact match */
+		else
+			skb->dev = orig_dev->master;
+	}
 
 	__get_cpu_var(netdev_rx_stat).total++;
 
@@ -2223,7 +2221,8 @@ int netif_receive_skb(struct sk_buff *skb)
 #endif
 
 	list_for_each_entry_rcu(ptype, &ptype_all, list) {
-		if (!ptype->dev || ptype->dev == skb->dev) {
+		if (ptype->dev == null_or_orig || ptype->dev == skb->dev ||
+		    ptype->dev == orig_dev) {
 			if (pt_prev)
 				ret = deliver_skb(skb, pt_prev, orig_dev);
 			pt_prev = ptype;
@@ -2248,7 +2247,8 @@ ncls:
 	list_for_each_entry_rcu(ptype,
 			&ptype_base[ntohs(type) & PTYPE_HASH_MASK], list) {
 		if (ptype->type == type &&
-		    (!ptype->dev || ptype->dev == skb->dev)) {
+		    (ptype->dev == null_or_orig || ptype->dev == skb->dev ||
+		     ptype->dev == orig_dev)) {
 			if (pt_prev)
 				ret = deliver_skb(skb, pt_prev, orig_dev);
 			pt_prev = ptype;
@@ -2270,6 +2270,20 @@ out:
 	return ret;
 }
 
+/* Network device is going away, flush any packets still pending  */
+static void flush_backlog(void *arg)
+{
+	struct net_device *dev = arg;
+	struct softnet_data *queue = &__get_cpu_var(softnet_data);
+	struct sk_buff *skb, *tmp;
+
+	skb_queue_walk_safe(&queue->input_pkt_queue, skb, tmp)
+		if (skb->dev == dev) {
+			__skb_unlink(skb, &queue->input_pkt_queue);
+			kfree_skb(skb);
+		}
+}
+
 static int process_backlog(struct napi_struct *napi, int quota)
 {
 	int work = 0;
@@ -2279,7 +2293,6 @@ static int process_backlog(struct napi_struct *napi, int quota)
 	napi->weight = weight_p;
 	do {
 		struct sk_buff *skb;
-		struct net_device *dev;
 
 		local_irq_disable();
 		skb = __skb_dequeue(&queue->input_pkt_queue);
@@ -2288,14 +2301,9 @@ static int process_backlog(struct napi_struct *napi, int quota)
 			local_irq_enable();
 			break;
 		}
-
 		local_irq_enable();
 
-		dev = skb->dev;
-
 		netif_receive_skb(skb);
-
-		dev_put(dev);
 	} while (++work < quota && jiffies == start_time);
 
 	return work;
@@ -3847,7 +3855,7 @@ static void rollback_registered(struct net_device *dev)
 		dev->uninit(dev);
 
 	/* Notifier chain MUST detach us from master device. */
-	BUG_TRAP(!dev->master);
+	WARN_ON(dev->master);
 
 	/* Remove entries from kobject tree */
 	netdev_unregister_kobject(dev);
@@ -3988,6 +3996,10 @@ int register_netdevice(struct net_device *dev)
 		}
 	}
 
+	/* Enable software GSO if SG is supported. */
+	if (dev->features & NETIF_F_SG)
+		dev->features |= NETIF_F_GSO;
+
 	netdev_initialize_kobject(dev);
 	ret = netdev_register_kobject(dev);
 	if (ret)
@@ -4165,13 +4177,15 @@ void netdev_run_todo(void)
 
 		dev->reg_state = NETREG_UNREGISTERED;
 
+		on_each_cpu(flush_backlog, dev, 1);
+
 		netdev_wait_allrefs(dev);
 
 		/* paranoia */
 		BUG_ON(atomic_read(&dev->refcnt));
-		BUG_TRAP(!dev->ip_ptr);
-		BUG_TRAP(!dev->ip6_ptr);
-		BUG_TRAP(!dev->dn_ptr);
+		WARN_ON(dev->ip_ptr);
+		WARN_ON(dev->ip6_ptr);
+		WARN_ON(dev->dn_ptr);
 
 		if (dev->destructor)
 			dev->destructor(dev);
@@ -4200,6 +4214,7 @@ static void netdev_init_queues(struct net_device *dev)
 {
 	netdev_init_one_queue(dev, &dev->rx_queue, NULL);
 	netdev_for_each_tx_queue(dev, netdev_init_one_queue, NULL);
+	spin_lock_init(&dev->tx_global_lock);
 }
 
 /**
diff --git a/net/core/neighbour.c b/net/core/neighbour.c
index f62c8af85d38..9d92e41826e7 100644
--- a/net/core/neighbour.c
+++ b/net/core/neighbour.c
@@ -2281,6 +2281,7 @@ static struct neighbour *neigh_get_idx(struct seq_file *seq, loff_t *pos)
 	struct neighbour *n = neigh_get_first(seq);
 
 	if (n) {
+		--(*pos);
 		while (*pos) {
 			n = neigh_get_next(seq, n, pos);
 			if (!n)
@@ -2341,6 +2342,7 @@ static struct pneigh_entry *pneigh_get_idx(struct seq_file *seq, loff_t *pos)
 	struct pneigh_entry *pn = pneigh_get_first(seq);
 
 	if (pn) {
+		--(*pos);
 		while (*pos) {
 			pn = pneigh_get_next(seq, pn, pos);
 			if (!pn)
@@ -2354,10 +2356,11 @@ static void *neigh_get_idx_any(struct seq_file *seq, loff_t *pos)
 {
 	struct neigh_seq_state *state = seq->private;
 	void *rc;
+	loff_t idxpos = *pos;
 
-	rc = neigh_get_idx(seq, pos);
+	rc = neigh_get_idx(seq, &idxpos);
 	if (!rc && !(state->flags & NEIGH_SEQ_NEIGH_ONLY))
-		rc = pneigh_get_idx(seq, pos);
+		rc = pneigh_get_idx(seq, &idxpos);
 
 	return rc;
 }
@@ -2366,7 +2369,6 @@ void *neigh_seq_start(struct seq_file *seq, loff_t *pos, struct neigh_table *tbl
 	__acquires(tbl->lock)
 {
 	struct neigh_seq_state *state = seq->private;
-	loff_t pos_minus_one;
 
 	state->tbl = tbl;
 	state->bucket = 0;
@@ -2374,8 +2376,7 @@ void *neigh_seq_start(struct seq_file *seq, loff_t *pos, struct neigh_table *tbl
 
 	read_lock_bh(&tbl->lock);
 
-	pos_minus_one = *pos - 1;
-	return *pos ? neigh_get_idx_any(seq, &pos_minus_one) : SEQ_START_TOKEN;
+	return *pos ? neigh_get_idx_any(seq, pos) : SEQ_START_TOKEN;
 }
 EXPORT_SYMBOL(neigh_seq_start);
 
@@ -2385,7 +2386,7 @@ void *neigh_seq_next(struct seq_file *seq, void *v, loff_t *pos)
 	void *rc;
 
 	if (v == SEQ_START_TOKEN) {
-		rc = neigh_get_idx(seq, pos);
+		rc = neigh_get_first(seq);
 		goto out;
 	}
 
diff --git a/net/core/netpoll.c b/net/core/netpoll.c
index c12720895ecf..6c7af390be0a 100644
--- a/net/core/netpoll.c
+++ b/net/core/netpoll.c
@@ -70,6 +70,7 @@ static void queue_process(struct work_struct *work)
 		local_irq_save(flags);
 		__netif_tx_lock(txq, smp_processor_id());
 		if (netif_tx_queue_stopped(txq) ||
+		    netif_tx_queue_frozen(txq) ||
 		    dev->hard_start_xmit(skb, dev) != NETDEV_TX_OK) {
 			skb_queue_head(&npinfo->txq, skb);
 			__netif_tx_unlock(txq);
diff --git a/net/core/pktgen.c b/net/core/pktgen.c
index c7d484f7e1c4..a756847e3814 100644
--- a/net/core/pktgen.c
+++ b/net/core/pktgen.c
@@ -168,7 +168,7 @@
 #include <asm/div64.h>		/* do_div */
 #include <asm/timex.h>
 
-#define VERSION  "pktgen v2.69: Packet Generator for packet performance testing.\n"
+#define VERSION  "pktgen v2.70: Packet Generator for packet performance testing.\n"
 
 #define IP_NAME_SZ 32
 #define MAX_MPLS_LABELS 16 /* This is the max label stack depth */
@@ -189,6 +189,7 @@
 #define F_FLOW_SEQ    (1<<11)	/* Sequential flows */
 #define F_IPSEC_ON    (1<<12)	/* ipsec on for flows */
 #define F_QUEUE_MAP_RND (1<<13)	/* queue map Random */
+#define F_QUEUE_MAP_CPU (1<<14)	/* queue map mirrors smp_processor_id() */
 
 /* Thread control flag bits */
 #define T_TERMINATE   (1<<0)
@@ -621,6 +622,9 @@ static int pktgen_if_show(struct seq_file *seq, void *v)
 	if (pkt_dev->flags & F_QUEUE_MAP_RND)
 		seq_printf(seq,  "QUEUE_MAP_RND  ");
 
+	if (pkt_dev->flags & F_QUEUE_MAP_CPU)
+		seq_printf(seq,  "QUEUE_MAP_CPU  ");
+
 	if (pkt_dev->cflows) {
 		if (pkt_dev->flags & F_FLOW_SEQ)
 			seq_printf(seq,  "FLOW_SEQ  "); /*in sequence flows*/
@@ -1134,6 +1138,12 @@ static ssize_t pktgen_if_write(struct file *file,
 
 		else if (strcmp(f, "!QUEUE_MAP_RND") == 0)
 			pkt_dev->flags &= ~F_QUEUE_MAP_RND;
+
+		else if (strcmp(f, "QUEUE_MAP_CPU") == 0)
+			pkt_dev->flags |= F_QUEUE_MAP_CPU;
+
+		else if (strcmp(f, "!QUEUE_MAP_CPU") == 0)
+			pkt_dev->flags &= ~F_QUEUE_MAP_CPU;
 #ifdef CONFIG_XFRM
 		else if (strcmp(f, "IPSEC") == 0)
 			pkt_dev->flags |= F_IPSEC_ON;
@@ -1895,6 +1905,23 @@ static int pktgen_device_event(struct notifier_block *unused,
 	return NOTIFY_DONE;
 }
 
+static struct net_device *pktgen_dev_get_by_name(struct pktgen_dev *pkt_dev, const char *ifname)
+{
+	char b[IFNAMSIZ+5];
+	int i = 0;
+
+	for(i=0; ifname[i] != '@'; i++) {
+		if(i == IFNAMSIZ)
+			break;
+
+		b[i] = ifname[i];
+	}
+	b[i] = 0;
+
+	return dev_get_by_name(&init_net, b);
+}
+
+
 /* Associate pktgen_dev with a device. */
 
 static int pktgen_setup_dev(struct pktgen_dev *pkt_dev, const char *ifname)
@@ -1908,7 +1935,7 @@ static int pktgen_setup_dev(struct pktgen_dev *pkt_dev, const char *ifname)
 		pkt_dev->odev = NULL;
 	}
 
-	odev = dev_get_by_name(&init_net, ifname);
+	odev = pktgen_dev_get_by_name(pkt_dev, ifname);
 	if (!odev) {
 		printk(KERN_ERR "pktgen: no such netdevice: \"%s\"\n", ifname);
 		return -ENODEV;
@@ -1934,6 +1961,8 @@ static int pktgen_setup_dev(struct pktgen_dev *pkt_dev, const char *ifname)
  */
 static void pktgen_setup_inject(struct pktgen_dev *pkt_dev)
 {
+	int ntxq;
+
 	if (!pkt_dev->odev) {
 		printk(KERN_ERR "pktgen: ERROR: pkt_dev->odev == NULL in "
 		       "setup_inject.\n");
@@ -1942,6 +1971,33 @@ static void pktgen_setup_inject(struct pktgen_dev *pkt_dev)
 		return;
 	}
 
+	/* make sure that we don't pick a non-existing transmit queue */
+	ntxq = pkt_dev->odev->real_num_tx_queues;
+	if (ntxq <= num_online_cpus() && (pkt_dev->flags & F_QUEUE_MAP_CPU)) {
+		printk(KERN_WARNING "pktgen: WARNING: QUEUE_MAP_CPU "
+		       "disabled because CPU count (%d) exceeds number ",
+		       num_online_cpus());
+		printk(KERN_WARNING "pktgen: WARNING: of tx queues "
+		       "(%d) on %s \n", ntxq, pkt_dev->odev->name);
+		pkt_dev->flags &= ~F_QUEUE_MAP_CPU;
+	}
+	if (ntxq <= pkt_dev->queue_map_min) {
+		printk(KERN_WARNING "pktgen: WARNING: Requested "
+		       "queue_map_min (%d) exceeds number of tx\n",
+		       pkt_dev->queue_map_min);
+		printk(KERN_WARNING "pktgen: WARNING: queues (%d) on "
+		       "%s, resetting\n", ntxq, pkt_dev->odev->name);
+		pkt_dev->queue_map_min = ntxq - 1;
+	}
+	if (ntxq <= pkt_dev->queue_map_max) {
+		printk(KERN_WARNING "pktgen: WARNING: Requested "
+		       "queue_map_max (%d) exceeds number of tx\n",
+		       pkt_dev->queue_map_max);
+		printk(KERN_WARNING "pktgen: WARNING: queues (%d) on "
+		       "%s, resetting\n", ntxq, pkt_dev->odev->name);
+		pkt_dev->queue_map_max = ntxq - 1;
+	}
+
 	/* Default to the interface's mac if not explicitly set. */
 
 	if (is_zero_ether_addr(pkt_dev->src_mac))
@@ -2085,15 +2141,19 @@ static inline int f_pick(struct pktgen_dev *pkt_dev)
 		if (pkt_dev->flows[flow].count >= pkt_dev->lflow) {
 			/* reset time */
 			pkt_dev->flows[flow].count = 0;
+			pkt_dev->flows[flow].flags = 0;
 			pkt_dev->curfl += 1;
 			if (pkt_dev->curfl >= pkt_dev->cflows)
 				pkt_dev->curfl = 0; /*reset */
 		}
 	} else {
 		flow = random32() % pkt_dev->cflows;
+		pkt_dev->curfl = flow;
 
-		if (pkt_dev->flows[flow].count > pkt_dev->lflow)
+		if (pkt_dev->flows[flow].count > pkt_dev->lflow) {
 			pkt_dev->flows[flow].count = 0;
+			pkt_dev->flows[flow].flags = 0;
+		}
 	}
 
 	return pkt_dev->curfl;
@@ -2125,7 +2185,11 @@ static void get_ipsec_sa(struct pktgen_dev *pkt_dev, int flow)
 #endif
 static void set_cur_queue_map(struct pktgen_dev *pkt_dev)
 {
-	if (pkt_dev->queue_map_min < pkt_dev->queue_map_max) {
+
+	if (pkt_dev->flags & F_QUEUE_MAP_CPU)
+		pkt_dev->cur_queue_map = smp_processor_id();
+
+	else if (pkt_dev->queue_map_min < pkt_dev->queue_map_max) {
 		__u16 t;
 		if (pkt_dev->flags & F_QUEUE_MAP_RND) {
 			t = random32() %
@@ -2162,7 +2226,7 @@ static void mod_cur_headers(struct pktgen_dev *pkt_dev)
 			mc = random32() % pkt_dev->src_mac_count;
 		else {
 			mc = pkt_dev->cur_src_mac_offset++;
-			if (pkt_dev->cur_src_mac_offset >
+			if (pkt_dev->cur_src_mac_offset >=
 			    pkt_dev->src_mac_count)
 				pkt_dev->cur_src_mac_offset = 0;
 		}
@@ -2189,7 +2253,7 @@ static void mod_cur_headers(struct pktgen_dev *pkt_dev)
 
 		else {
 			mc = pkt_dev->cur_dst_mac_offset++;
-			if (pkt_dev->cur_dst_mac_offset >
+			if (pkt_dev->cur_dst_mac_offset >=
 			    pkt_dev->dst_mac_count) {
 				pkt_dev->cur_dst_mac_offset = 0;
 			}
@@ -3305,6 +3369,7 @@ static __inline__ void pktgen_xmit(struct pktgen_dev *pkt_dev)
 
 	txq = netdev_get_tx_queue(odev, queue_map);
 	if (netif_tx_queue_stopped(txq) ||
+	    netif_tx_queue_frozen(txq) ||
 	    need_resched()) {
 		idle_start = getCurUs();
 
@@ -3320,7 +3385,8 @@ static __inline__ void pktgen_xmit(struct pktgen_dev *pkt_dev)
 
 		pkt_dev->idle_acc += getCurUs() - idle_start;
 
-		if (netif_tx_queue_stopped(txq)) {
+		if (netif_tx_queue_stopped(txq) ||
+		    netif_tx_queue_frozen(txq)) {
 			pkt_dev->next_tx_us = getCurUs();	/* TODO */
 			pkt_dev->next_tx_ns = 0;
 			goto out;	/* Try the next interface */
@@ -3352,7 +3418,8 @@ static __inline__ void pktgen_xmit(struct pktgen_dev *pkt_dev)
 	txq = netdev_get_tx_queue(odev, queue_map);
 
 	__netif_tx_lock_bh(txq);
-	if (!netif_tx_queue_stopped(txq)) {
+	if (!netif_tx_queue_stopped(txq) &&
+	    !netif_tx_queue_frozen(txq)) {
 
 		atomic_inc(&(pkt_dev->skb->users));
 	      retry_now:
diff --git a/net/core/request_sock.c b/net/core/request_sock.c
index 2d3035d3abd7..7552495aff7a 100644
--- a/net/core/request_sock.c
+++ b/net/core/request_sock.c
@@ -123,7 +123,7 @@ void reqsk_queue_destroy(struct request_sock_queue *queue)
 		}
 	}
 
-	BUG_TRAP(lopt->qlen == 0);
+	WARN_ON(lopt->qlen != 0);
 	if (lopt_size > PAGE_SIZE)
 		vfree(lopt);
 	else
diff --git a/net/core/skbuff.c b/net/core/skbuff.c
index e4115672b6cf..ca1ccdf1ef76 100644
--- a/net/core/skbuff.c
+++ b/net/core/skbuff.c
@@ -485,6 +485,9 @@ static struct sk_buff *__skb_clone(struct sk_buff *n, struct sk_buff *skb)
 	C(head);
 	C(data);
 	C(truesize);
+#if defined(CONFIG_MAC80211) || defined(CONFIG_MAC80211_MODULE)
+	C(do_not_encrypt);
+#endif
 	atomic_set(&n->users, 1);
 
 	atomic_inc(&(skb_shinfo(skb)->dataref));
@@ -1200,7 +1203,7 @@ int skb_copy_bits(const struct sk_buff *skb, int offset, void *to, int len)
 	for (i = 0; i < skb_shinfo(skb)->nr_frags; i++) {
 		int end;
 
-		BUG_TRAP(start <= offset + len);
+		WARN_ON(start > offset + len);
 
 		end = start + skb_shinfo(skb)->frags[i].size;
 		if ((copy = end - offset) > 0) {
@@ -1229,7 +1232,7 @@ int skb_copy_bits(const struct sk_buff *skb, int offset, void *to, int len)
 		for (; list; list = list->next) {
 			int end;
 
-			BUG_TRAP(start <= offset + len);
+			WARN_ON(start > offset + len);
 
 			end = start + list->len;
 			if ((copy = end - offset) > 0) {
@@ -1475,7 +1478,7 @@ int skb_store_bits(struct sk_buff *skb, int offset, const void *from, int len)
 		skb_frag_t *frag = &skb_shinfo(skb)->frags[i];
 		int end;
 
-		BUG_TRAP(start <= offset + len);
+		WARN_ON(start > offset + len);
 
 		end = start + frag->size;
 		if ((copy = end - offset) > 0) {
@@ -1503,7 +1506,7 @@ int skb_store_bits(struct sk_buff *skb, int offset, const void *from, int len)
 		for (; list; list = list->next) {
 			int end;
 
-			BUG_TRAP(start <= offset + len);
+			WARN_ON(start > offset + len);
 
 			end = start + list->len;
 			if ((copy = end - offset) > 0) {
@@ -1552,7 +1555,7 @@ __wsum skb_checksum(const struct sk_buff *skb, int offset,
 	for (i = 0; i < skb_shinfo(skb)->nr_frags; i++) {
 		int end;
 
-		BUG_TRAP(start <= offset + len);
+		WARN_ON(start > offset + len);
 
 		end = start + skb_shinfo(skb)->frags[i].size;
 		if ((copy = end - offset) > 0) {
@@ -1581,7 +1584,7 @@ __wsum skb_checksum(const struct sk_buff *skb, int offset,
 		for (; list; list = list->next) {
 			int end;
 
-			BUG_TRAP(start <= offset + len);
+			WARN_ON(start > offset + len);
 
 			end = start + list->len;
 			if ((copy = end - offset) > 0) {
@@ -1629,7 +1632,7 @@ __wsum skb_copy_and_csum_bits(const struct sk_buff *skb, int offset,
 	for (i = 0; i < skb_shinfo(skb)->nr_frags; i++) {
 		int end;
 
-		BUG_TRAP(start <= offset + len);
+		WARN_ON(start > offset + len);
 
 		end = start + skb_shinfo(skb)->frags[i].size;
 		if ((copy = end - offset) > 0) {
@@ -1662,7 +1665,7 @@ __wsum skb_copy_and_csum_bits(const struct sk_buff *skb, int offset,
 			__wsum csum2;
 			int end;
 
-			BUG_TRAP(start <= offset + len);
+			WARN_ON(start > offset + len);
 
 			end = start + list->len;
 			if ((copy = end - offset) > 0) {
@@ -2253,14 +2256,7 @@ struct sk_buff *skb_segment(struct sk_buff *skb, int features)
 			segs = nskb;
 		tail = nskb;
 
-		nskb->dev = skb->dev;
-		skb_copy_queue_mapping(nskb, skb);
-		nskb->priority = skb->priority;
-		nskb->protocol = skb->protocol;
-		nskb->vlan_tci = skb->vlan_tci;
-		nskb->dst = dst_clone(skb->dst);
-		memcpy(nskb->cb, skb->cb, sizeof(skb->cb));
-		nskb->pkt_type = skb->pkt_type;
+		__copy_skb_header(nskb, skb);
 		nskb->mac_len = skb->mac_len;
 
 		skb_reserve(nskb, headroom);
@@ -2271,6 +2267,7 @@ struct sk_buff *skb_segment(struct sk_buff *skb, int features)
 		skb_copy_from_linear_data(skb, skb_put(nskb, doffset),
 					  doffset);
 		if (!sg) {
+			nskb->ip_summed = CHECKSUM_NONE;
 			nskb->csum = skb_copy_and_csum_bits(skb, offset,
 							    skb_put(nskb, len),
 							    len, 0);
@@ -2280,8 +2277,6 @@ struct sk_buff *skb_segment(struct sk_buff *skb, int features)
 		frag = skb_shinfo(nskb)->frags;
 		k = 0;
 
-		nskb->ip_summed = CHECKSUM_PARTIAL;
-		nskb->csum = skb->csum;
 		skb_copy_from_linear_data_offset(skb, offset,
 						 skb_put(nskb, hsize), hsize);
 
@@ -2373,7 +2368,7 @@ __skb_to_sgvec(struct sk_buff *skb, struct scatterlist *sg, int offset, int len)
 	for (i = 0; i < skb_shinfo(skb)->nr_frags; i++) {
 		int end;
 
-		BUG_TRAP(start <= offset + len);
+		WARN_ON(start > offset + len);
 
 		end = start + skb_shinfo(skb)->frags[i].size;
 		if ((copy = end - offset) > 0) {
@@ -2397,7 +2392,7 @@ __skb_to_sgvec(struct sk_buff *skb, struct scatterlist *sg, int offset, int len)
 		for (; list; list = list->next) {
 			int end;
 
-			BUG_TRAP(start <= offset + len);
+			WARN_ON(start > offset + len);
 
 			end = start + list->len;
 			if ((copy = end - offset) > 0) {
diff --git a/net/core/stream.c b/net/core/stream.c
index 4a0ad152c9c4..a6b3437ff082 100644
--- a/net/core/stream.c
+++ b/net/core/stream.c
@@ -192,13 +192,13 @@ void sk_stream_kill_queues(struct sock *sk)
 	__skb_queue_purge(&sk->sk_error_queue);
 
 	/* Next, the write queue. */
-	BUG_TRAP(skb_queue_empty(&sk->sk_write_queue));
+	WARN_ON(!skb_queue_empty(&sk->sk_write_queue));
 
 	/* Account for returned memory. */
 	sk_mem_reclaim(sk);
 
-	BUG_TRAP(!sk->sk_wmem_queued);
-	BUG_TRAP(!sk->sk_forward_alloc);
+	WARN_ON(sk->sk_wmem_queued);
+	WARN_ON(sk->sk_forward_alloc);
 
 	/* It is _impossible_ for the backlog to contain anything
 	 * when we get here.  All user references to this socket
diff --git a/net/core/sysctl_net_core.c b/net/core/sysctl_net_core.c
index a570e2af22cb..f686467ff12b 100644
--- a/net/core/sysctl_net_core.c
+++ b/net/core/sysctl_net_core.c
@@ -67,7 +67,7 @@ static struct ctl_table net_core_table[] = {
 	{
 		.ctl_name	= NET_CORE_MSG_COST,
 		.procname	= "message_cost",
-		.data		= &net_msg_cost,
+		.data		= &net_ratelimit_state.interval,
 		.maxlen		= sizeof(int),
 		.mode		= 0644,
 		.proc_handler	= &proc_dointvec_jiffies,
@@ -76,7 +76,7 @@ static struct ctl_table net_core_table[] = {
 	{
 		.ctl_name	= NET_CORE_MSG_BURST,
 		.procname	= "message_burst",
-		.data		= &net_msg_burst,
+		.data		= &net_ratelimit_state.burst,
 		.maxlen		= sizeof(int),
 		.mode		= 0644,
 		.proc_handler	= &proc_dointvec,
diff --git a/net/core/user_dma.c b/net/core/user_dma.c
index 8c6b706963ff..164b090d5ac3 100644
--- a/net/core/user_dma.c
+++ b/net/core/user_dma.c
@@ -27,7 +27,6 @@
 
 #include <linux/dmaengine.h>
 #include <linux/socket.h>
-#include <linux/rtnetlink.h> /* for BUG_TRAP */
 #include <net/tcp.h>
 #include <net/netdma.h>
 
@@ -72,7 +71,7 @@ int dma_skb_copy_datagram_iovec(struct dma_chan *chan,
 	for (i = 0; i < skb_shinfo(skb)->nr_frags; i++) {
 		int end;
 
-		BUG_TRAP(start <= offset + len);
+		WARN_ON(start > offset + len);
 
 		end = start + skb_shinfo(skb)->frags[i].size;
 		copy = end - offset;
@@ -101,7 +100,7 @@ int dma_skb_copy_datagram_iovec(struct dma_chan *chan,
 		for (; list; list = list->next) {
 			int end;
 
-			BUG_TRAP(start <= offset + len);
+			WARN_ON(start > offset + len);
 
 			end = start + list->len;
 			copy = end - offset;
diff --git a/net/core/utils.c b/net/core/utils.c
index 8031eb59054e..72e0ebe964a0 100644
--- a/net/core/utils.c
+++ b/net/core/utils.c
@@ -31,17 +31,16 @@
 #include <asm/system.h>
 #include <asm/uaccess.h>
 
-int net_msg_cost __read_mostly = 5*HZ;
-int net_msg_burst __read_mostly = 10;
 int net_msg_warn __read_mostly = 1;
 EXPORT_SYMBOL(net_msg_warn);
 
+DEFINE_RATELIMIT_STATE(net_ratelimit_state, 5 * HZ, 10);
 /*
  * All net warning printk()s should be guarded by this function.
  */
 int net_ratelimit(void)
 {
-	return __printk_ratelimit(net_msg_cost, net_msg_burst);
+	return __ratelimit(&net_ratelimit_state);
 }
 EXPORT_SYMBOL(net_ratelimit);
 
diff --git a/net/dccp/dccp.h b/net/dccp/dccp.h
index 32617e0576cb..b4bc6e095a0e 100644
--- a/net/dccp/dccp.h
+++ b/net/dccp/dccp.h
@@ -164,7 +164,7 @@ static inline bool dccp_loss_free(const u64 s1, const u64 s2, const u64 ndp)
 {
 	s64 delta = dccp_delta_seqno(s1, s2);
 
-	BUG_TRAP(delta >= 0);
+	WARN_ON(delta < 0);
 	return (u64)delta <= ndp + 1;
 }
 
@@ -226,10 +226,11 @@ static inline void dccp_csum_outgoing(struct sk_buff *skb)
 
 extern void dccp_v4_send_check(struct sock *sk, int len, struct sk_buff *skb);
 
-extern int  dccp_retransmit_skb(struct sock *sk, struct sk_buff *skb);
+extern int  dccp_retransmit_skb(struct sock *sk);
 
 extern void dccp_send_ack(struct sock *sk);
-extern void dccp_reqsk_send_ack(struct sk_buff *sk, struct request_sock *rsk);
+extern void dccp_reqsk_send_ack(struct sock *sk, struct sk_buff *skb,
+				struct request_sock *rsk);
 
 extern void dccp_send_sync(struct sock *sk, const u64 seq,
 			   const enum dccp_pkt_type pkt_type);
diff --git a/net/dccp/input.c b/net/dccp/input.c
index 08392ed86c25..803933ab396d 100644
--- a/net/dccp/input.c
+++ b/net/dccp/input.c
@@ -411,12 +411,6 @@ static int dccp_rcv_request_sent_state_process(struct sock *sk,
 		struct dccp_sock *dp = dccp_sk(sk);
 		long tstamp = dccp_timestamp();
 
-		/* Stop the REQUEST timer */
-		inet_csk_clear_xmit_timer(sk, ICSK_TIME_RETRANS);
-		BUG_TRAP(sk->sk_send_head != NULL);
-		__kfree_skb(sk->sk_send_head);
-		sk->sk_send_head = NULL;
-
 		if (!between48(DCCP_SKB_CB(skb)->dccpd_ack_seq,
 			       dp->dccps_awl, dp->dccps_awh)) {
 			dccp_pr_debug("invalid ackno: S.AWL=%llu, "
@@ -441,6 +435,12 @@ static int dccp_rcv_request_sent_state_process(struct sock *sk,
 				    DCCP_ACKVEC_STATE_RECEIVED))
 			goto out_invalid_packet; /* FIXME: change error code */
 
+		/* Stop the REQUEST timer */
+		inet_csk_clear_xmit_timer(sk, ICSK_TIME_RETRANS);
+		WARN_ON(sk->sk_send_head == NULL);
+		kfree_skb(sk->sk_send_head);
+		sk->sk_send_head = NULL;
+
 		dp->dccps_isr = DCCP_SKB_CB(skb)->dccpd_seq;
 		dccp_update_gsr(sk, dp->dccps_isr);
 		/*
diff --git a/net/dccp/ipv4.c b/net/dccp/ipv4.c
index 2622ace17c46..882c5c4de69e 100644
--- a/net/dccp/ipv4.c
+++ b/net/dccp/ipv4.c
@@ -196,8 +196,8 @@ static inline void dccp_do_pmtu_discovery(struct sock *sk,
 static void dccp_v4_err(struct sk_buff *skb, u32 info)
 {
 	const struct iphdr *iph = (struct iphdr *)skb->data;
-	const struct dccp_hdr *dh = (struct dccp_hdr *)(skb->data +
-							(iph->ihl << 2));
+	const u8 offset = iph->ihl << 2;
+	const struct dccp_hdr *dh = (struct dccp_hdr *)(skb->data + offset);
 	struct dccp_sock *dp;
 	struct inet_sock *inet;
 	const int type = icmp_hdr(skb)->type;
@@ -207,7 +207,8 @@ static void dccp_v4_err(struct sk_buff *skb, u32 info)
 	int err;
 	struct net *net = dev_net(skb->dev);
 
-	if (skb->len < (iph->ihl << 2) + 8) {
+	if (skb->len < offset + sizeof(*dh) ||
+	    skb->len < offset + __dccp_basic_hdr_len(dh)) {
 		ICMP_INC_STATS_BH(net, ICMP_MIB_INERRORS);
 		return;
 	}
@@ -238,7 +239,7 @@ static void dccp_v4_err(struct sk_buff *skb, u32 info)
 	dp = dccp_sk(sk);
 	seq = dccp_hdr_seq(dh);
 	if ((1 << sk->sk_state) & ~(DCCPF_REQUESTING | DCCPF_LISTEN) &&
-	    !between48(seq, dp->dccps_swl, dp->dccps_swh)) {
+	    !between48(seq, dp->dccps_awl, dp->dccps_awh)) {
 		NET_INC_STATS_BH(net, LINUX_MIB_OUTOFWINDOWICMPS);
 		goto out;
 	}
@@ -283,7 +284,7 @@ static void dccp_v4_err(struct sk_buff *skb, u32 info)
 		 * ICMPs are not backlogged, hence we cannot get an established
 		 * socket here.
 		 */
-		BUG_TRAP(!req->sk);
+		WARN_ON(req->sk);
 
 		if (seq != dccp_rsk(req)->dreq_iss) {
 			NET_INC_STATS_BH(net, LINUX_MIB_OUTOFWINDOWICMPS);
diff --git a/net/dccp/ipv6.c b/net/dccp/ipv6.c
index b74e8b2cbe55..5e1ee0da2c40 100644
--- a/net/dccp/ipv6.c
+++ b/net/dccp/ipv6.c
@@ -89,12 +89,19 @@ static void dccp_v6_err(struct sk_buff *skb, struct inet6_skb_parm *opt,
 {
 	struct ipv6hdr *hdr = (struct ipv6hdr *)skb->data;
 	const struct dccp_hdr *dh = (struct dccp_hdr *)(skb->data + offset);
+	struct dccp_sock *dp;
 	struct ipv6_pinfo *np;
 	struct sock *sk;
 	int err;
 	__u64 seq;
 	struct net *net = dev_net(skb->dev);
 
+	if (skb->len < offset + sizeof(*dh) ||
+	    skb->len < offset + __dccp_basic_hdr_len(dh)) {
+		ICMP6_INC_STATS_BH(__in6_dev_get(skb->dev), ICMP6_MIB_INERRORS);
+		return;
+	}
+
 	sk = inet6_lookup(net, &dccp_hashinfo,
 			&hdr->daddr, dh->dccph_dport,
 			&hdr->saddr, dh->dccph_sport, inet6_iif(skb));
@@ -116,6 +123,14 @@ static void dccp_v6_err(struct sk_buff *skb, struct inet6_skb_parm *opt,
 	if (sk->sk_state == DCCP_CLOSED)
 		goto out;
 
+	dp = dccp_sk(sk);
+	seq = dccp_hdr_seq(dh);
+	if ((1 << sk->sk_state) & ~(DCCPF_REQUESTING | DCCPF_LISTEN) &&
+	    !between48(seq, dp->dccps_awl, dp->dccps_awh)) {
+		NET_INC_STATS_BH(net, LINUX_MIB_OUTOFWINDOWICMPS);
+		goto out;
+	}
+
 	np = inet6_sk(sk);
 
 	if (type == ICMPV6_PKT_TOOBIG) {
@@ -168,7 +183,6 @@ static void dccp_v6_err(struct sk_buff *skb, struct inet6_skb_parm *opt,
 
 	icmpv6_err_convert(type, code, &err);
 
-	seq = dccp_hdr_seq(dh);
 	/* Might be for an request_sock */
 	switch (sk->sk_state) {
 		struct request_sock *req, **prev;
@@ -186,7 +200,7 @@ static void dccp_v6_err(struct sk_buff *skb, struct inet6_skb_parm *opt,
 		 * ICMPs are not backlogged, hence we cannot get an established
 		 * socket here.
 		 */
-		BUG_TRAP(req->sk == NULL);
+		WARN_ON(req->sk != NULL);
 
 		if (seq != dccp_rsk(req)->dreq_iss) {
 			NET_INC_STATS_BH(net, LINUX_MIB_OUTOFWINDOWICMPS);
diff --git a/net/dccp/minisocks.c b/net/dccp/minisocks.c
index 66dca5bba858..b2804e2d1b8c 100644
--- a/net/dccp/minisocks.c
+++ b/net/dccp/minisocks.c
@@ -296,7 +296,8 @@ int dccp_child_process(struct sock *parent, struct sock *child,
 
 EXPORT_SYMBOL_GPL(dccp_child_process);
 
-void dccp_reqsk_send_ack(struct sk_buff *skb, struct request_sock *rsk)
+void dccp_reqsk_send_ack(struct sock *sk, struct sk_buff *skb,
+			 struct request_sock *rsk)
 {
 	DCCP_BUG("DCCP-ACK packets are never sent in LISTEN/RESPOND state");
 }
diff --git a/net/dccp/output.c b/net/dccp/output.c
index fe20068c5d8e..d06945c7d3df 100644
--- a/net/dccp/output.c
+++ b/net/dccp/output.c
@@ -53,8 +53,11 @@ static int dccp_transmit_skb(struct sock *sk, struct sk_buff *skb)
 					  dccp_packet_hdr_len(dcb->dccpd_type);
 		int err, set_ack = 1;
 		u64 ackno = dp->dccps_gsr;
-
-		dccp_inc_seqno(&dp->dccps_gss);
+		/*
+		 * Increment GSS here already in case the option code needs it.
+		 * Update GSS for real only if option processing below succeeds.
+		 */
+		dcb->dccpd_seq = ADD48(dp->dccps_gss, 1);
 
 		switch (dcb->dccpd_type) {
 		case DCCP_PKT_DATA:
@@ -66,6 +69,9 @@ static int dccp_transmit_skb(struct sock *sk, struct sk_buff *skb)
 
 		case DCCP_PKT_REQUEST:
 			set_ack = 0;
+			/* Use ISS on the first (non-retransmitted) Request. */
+			if (icsk->icsk_retransmits == 0)
+				dcb->dccpd_seq = dp->dccps_iss;
 			/* fall through */
 
 		case DCCP_PKT_SYNC:
@@ -84,8 +90,6 @@ static int dccp_transmit_skb(struct sock *sk, struct sk_buff *skb)
 			break;
 		}
 
-		dcb->dccpd_seq = dp->dccps_gss;
-
 		if (dccp_insert_options(sk, skb)) {
 			kfree_skb(skb);
 			return -EPROTO;
@@ -103,7 +107,7 @@ static int dccp_transmit_skb(struct sock *sk, struct sk_buff *skb)
 		/* XXX For now we're using only 48 bits sequence numbers */
 		dh->dccph_x	= 1;
 
-		dp->dccps_awh = dp->dccps_gss;
+		dccp_update_gss(sk, dcb->dccpd_seq);
 		dccp_hdr_set_seq(dh, dp->dccps_gss);
 		if (set_ack)
 			dccp_hdr_set_ack(dccp_hdr_ack_bits(skb), ackno);
@@ -112,6 +116,11 @@ static int dccp_transmit_skb(struct sock *sk, struct sk_buff *skb)
 		case DCCP_PKT_REQUEST:
 			dccp_hdr_request(skb)->dccph_req_service =
 							dp->dccps_service;
+			/*
+			 * Limit Ack window to ISS <= P.ackno <= GSS, so that
+			 * only Responses to Requests we sent are considered.
+			 */
+			dp->dccps_awl = dp->dccps_iss;
 			break;
 		case DCCP_PKT_RESET:
 			dccp_hdr_reset(skb)->dccph_reset_code =
@@ -284,14 +293,26 @@ void dccp_write_xmit(struct sock *sk, int block)
 	}
 }
 
-int dccp_retransmit_skb(struct sock *sk, struct sk_buff *skb)
+/**
+ * dccp_retransmit_skb  -  Retransmit Request, Close, or CloseReq packets
+ * There are only four retransmittable packet types in DCCP:
+ * - Request  in client-REQUEST  state (sec. 8.1.1),
+ * - CloseReq in server-CLOSEREQ state (sec. 8.3),
+ * - Close    in   node-CLOSING  state (sec. 8.3),
+ * - Acks in client-PARTOPEN state (sec. 8.1.5, handled by dccp_delack_timer()).
+ * This function expects sk->sk_send_head to contain the original skb.
+ */
+int dccp_retransmit_skb(struct sock *sk)
 {
+	WARN_ON(sk->sk_send_head == NULL);
+
 	if (inet_csk(sk)->icsk_af_ops->rebuild_header(sk) != 0)
 		return -EHOSTUNREACH; /* Routing failure or similar. */
 
-	return dccp_transmit_skb(sk, (skb_cloned(skb) ?
-				      pskb_copy(skb, GFP_ATOMIC):
-				      skb_clone(skb, GFP_ATOMIC)));
+	/* this count is used to distinguish original and retransmitted skb */
+	inet_csk(sk)->icsk_retransmits++;
+
+	return dccp_transmit_skb(sk, skb_clone(sk->sk_send_head, GFP_ATOMIC));
 }
 
 struct sk_buff *dccp_make_response(struct sock *sk, struct dst_entry *dst,
@@ -437,19 +458,7 @@ static inline void dccp_connect_init(struct sock *sk)
 
 	dccp_sync_mss(sk, dst_mtu(dst));
 
-	/*
-	 * SWL and AWL are initially adjusted so that they are not less than
-	 * the initial Sequence Numbers received and sent, respectively:
-	 *	SWL := max(GSR + 1 - floor(W/4), ISR),
-	 *	AWL := max(GSS - W' + 1, ISS).
-	 * These adjustments MUST be applied only at the beginning of the
-	 * connection.
-	 */
-	dccp_update_gss(sk, dp->dccps_iss);
-	dccp_set_seqno(&dp->dccps_awl, max48(dp->dccps_awl, dp->dccps_iss));
-
-	/* S.GAR - greatest valid acknowledgement number received on a non-Sync;
-	 *         initialized to S.ISS (sec. 8.5)                            */
+	/* Initialise GAR as per 8.5; AWL/AWH are set in dccp_transmit_skb() */
 	dp->dccps_gar = dp->dccps_iss;
 
 	icsk->icsk_retransmits = 0;
diff --git a/net/dccp/proto.c b/net/dccp/proto.c
index a0b56009611f..1ca3b26eed0f 100644
--- a/net/dccp/proto.c
+++ b/net/dccp/proto.c
@@ -327,7 +327,7 @@ int dccp_disconnect(struct sock *sk, int flags)
 	inet_csk_delack_init(sk);
 	__sk_dst_reset(sk);
 
-	BUG_TRAP(!inet->num || icsk->icsk_bind_hash);
+	WARN_ON(inet->num && !icsk->icsk_bind_hash);
 
 	sk->sk_error_report(sk);
 	return err;
@@ -474,6 +474,11 @@ static int dccp_setsockopt_change(struct sock *sk, int type,
 
 	if (copy_from_user(&opt, optval, sizeof(opt)))
 		return -EFAULT;
+	/*
+	 * rfc4340: 6.1. Change Options
+	 */
+	if (opt.dccpsf_len < 1)
+		return -EINVAL;
 
 	val = kmalloc(opt.dccpsf_len, GFP_KERNEL);
 	if (!val)
@@ -981,7 +986,7 @@ adjudge_to_death:
 	 */
 	local_bh_disable();
 	bh_lock_sock(sk);
-	BUG_TRAP(!sock_owned_by_user(sk));
+	WARN_ON(sock_owned_by_user(sk));
 
 	/* Have we already been destroyed by a softirq or backlog? */
 	if (state != DCCP_CLOSED && sk->sk_state == DCCP_CLOSED)
diff --git a/net/dccp/timer.c b/net/dccp/timer.c
index 3608d5342ca2..54b3c7e9e016 100644
--- a/net/dccp/timer.c
+++ b/net/dccp/timer.c
@@ -99,21 +99,11 @@ static void dccp_retransmit_timer(struct sock *sk)
 	}
 
 	/*
-	 * sk->sk_send_head has to have one skb with
-	 * DCCP_SKB_CB(skb)->dccpd_type set to one of the retransmittable DCCP
-	 * packet types. The only packets eligible for retransmission are:
-	 *	-- Requests in client-REQUEST  state (sec. 8.1.1)
-	 *	-- Acks     in client-PARTOPEN state (sec. 8.1.5)
-	 *	-- CloseReq in server-CLOSEREQ state (sec. 8.3)
-	 *	-- Close    in   node-CLOSING  state (sec. 8.3)                */
-	BUG_TRAP(sk->sk_send_head != NULL);
-
-	/*
 	 * More than than 4MSL (8 minutes) has passed, a RESET(aborted) was
 	 * sent, no need to retransmit, this sock is dead.
 	 */
 	if (dccp_write_timeout(sk))
-		goto out;
+		return;
 
 	/*
 	 * We want to know the number of packets retransmitted, not the
@@ -122,30 +112,28 @@ static void dccp_retransmit_timer(struct sock *sk)
 	if (icsk->icsk_retransmits == 0)
 		DCCP_INC_STATS_BH(DCCP_MIB_TIMEOUTS);
 
-	if (dccp_retransmit_skb(sk, sk->sk_send_head) < 0) {
+	if (dccp_retransmit_skb(sk) != 0) {
 		/*
 		 * Retransmission failed because of local congestion,
 		 * do not backoff.
 		 */
-		if (icsk->icsk_retransmits == 0)
+		if (--icsk->icsk_retransmits == 0)
 			icsk->icsk_retransmits = 1;
 		inet_csk_reset_xmit_timer(sk, ICSK_TIME_RETRANS,
 					  min(icsk->icsk_rto,
 					      TCP_RESOURCE_PROBE_INTERVAL),
 					  DCCP_RTO_MAX);
-		goto out;
+		return;
 	}
 
 backoff:
 	icsk->icsk_backoff++;
-	icsk->icsk_retransmits++;
 
 	icsk->icsk_rto = min(icsk->icsk_rto << 1, DCCP_RTO_MAX);
 	inet_csk_reset_xmit_timer(sk, ICSK_TIME_RETRANS, icsk->icsk_rto,
 				  DCCP_RTO_MAX);
 	if (icsk->icsk_retransmits > sysctl_dccp_retries1)
 		__sk_dst_reset(sk);
-out:;
 }
 
 static void dccp_write_timer(unsigned long data)
diff --git a/net/ipv4/Kconfig b/net/ipv4/Kconfig
index 4670683b4688..591ea23639ca 100644
--- a/net/ipv4/Kconfig
+++ b/net/ipv4/Kconfig
@@ -356,10 +356,8 @@ config INET_ESP
 
 config INET_IPCOMP
 	tristate "IP: IPComp transformation"
-	select XFRM
 	select INET_XFRM_TUNNEL
-	select CRYPTO
-	select CRYPTO_DEFLATE
+	select XFRM_IPCOMP
 	---help---
 	  Support for IP Payload Compression Protocol (IPComp) (RFC3173),
 	  typically needed for IPsec.
diff --git a/net/ipv4/af_inet.c b/net/ipv4/af_inet.c
index dd919d84285f..8a3ac1fa71a9 100644
--- a/net/ipv4/af_inet.c
+++ b/net/ipv4/af_inet.c
@@ -148,10 +148,10 @@ void inet_sock_destruct(struct sock *sk)
 		return;
 	}
 
-	BUG_TRAP(!atomic_read(&sk->sk_rmem_alloc));
-	BUG_TRAP(!atomic_read(&sk->sk_wmem_alloc));
-	BUG_TRAP(!sk->sk_wmem_queued);
-	BUG_TRAP(!sk->sk_forward_alloc);
+	WARN_ON(atomic_read(&sk->sk_rmem_alloc));
+	WARN_ON(atomic_read(&sk->sk_wmem_alloc));
+	WARN_ON(sk->sk_wmem_queued);
+	WARN_ON(sk->sk_forward_alloc);
 
 	kfree(inet->opt);
 	dst_release(sk->sk_dst_cache);
@@ -264,7 +264,6 @@ static inline int inet_netns_ok(struct net *net, int protocol)
 static int inet_create(struct net *net, struct socket *sock, int protocol)
 {
 	struct sock *sk;
-	struct list_head *p;
 	struct inet_protosw *answer;
 	struct inet_sock *inet;
 	struct proto *answer_prot;
@@ -281,13 +280,12 @@ static int inet_create(struct net *net, struct socket *sock, int protocol)
 	sock->state = SS_UNCONNECTED;
 
 	/* Look for the requested type/protocol pair. */
-	answer = NULL;
 lookup_protocol:
 	err = -ESOCKTNOSUPPORT;
 	rcu_read_lock();
-	list_for_each_rcu(p, &inetsw[sock->type]) {
-		answer = list_entry(p, struct inet_protosw, list);
+	list_for_each_entry_rcu(answer, &inetsw[sock->type], list) {
 
+		err = 0;
 		/* Check the non-wild match. */
 		if (protocol == answer->protocol) {
 			if (protocol != IPPROTO_IP)
@@ -302,10 +300,9 @@ lookup_protocol:
 				break;
 		}
 		err = -EPROTONOSUPPORT;
-		answer = NULL;
 	}
 
-	if (unlikely(answer == NULL)) {
+	if (unlikely(err)) {
 		if (try_loading_module < 2) {
 			rcu_read_unlock();
 			/*
@@ -341,7 +338,7 @@ lookup_protocol:
 	answer_flags = answer->flags;
 	rcu_read_unlock();
 
-	BUG_TRAP(answer_prot->slab != NULL);
+	WARN_ON(answer_prot->slab == NULL);
 
 	err = -ENOBUFS;
 	sk = sk_alloc(net, PF_INET, GFP_KERNEL, answer_prot);
@@ -661,8 +658,8 @@ int inet_accept(struct socket *sock, struct socket *newsock, int flags)
 
 	lock_sock(sk2);
 
-	BUG_TRAP((1 << sk2->sk_state) &
-		 (TCPF_ESTABLISHED | TCPF_CLOSE_WAIT | TCPF_CLOSE));
+	WARN_ON(!((1 << sk2->sk_state) &
+		  (TCPF_ESTABLISHED | TCPF_CLOSE_WAIT | TCPF_CLOSE)));
 
 	sock_graft(sk2, newsock);
 
@@ -1442,6 +1439,10 @@ static int __init inet_init(void)
 
 	(void)sock_register(&inet_family_ops);
 
+#ifdef CONFIG_SYSCTL
+	ip_static_sysctl_init();
+#endif
+
 	/*
 	 *	Add all the base protocols.
 	 */
diff --git a/net/ipv4/devinet.c b/net/ipv4/devinet.c
index 2e667e2f90df..b12dae2b0b2d 100644
--- a/net/ipv4/devinet.c
+++ b/net/ipv4/devinet.c
@@ -138,8 +138,8 @@ void in_dev_finish_destroy(struct in_device *idev)
 {
 	struct net_device *dev = idev->dev;
 
-	BUG_TRAP(!idev->ifa_list);
-	BUG_TRAP(!idev->mc_list);
+	WARN_ON(idev->ifa_list);
+	WARN_ON(idev->mc_list);
 #ifdef NET_REFCNT_DEBUG
 	printk(KERN_DEBUG "in_dev_finish_destroy: %p=%s\n",
 	       idev, dev ? dev->name : "NIL");
@@ -399,7 +399,7 @@ static int inet_set_ifa(struct net_device *dev, struct in_ifaddr *ifa)
 	}
 	ipv4_devconf_setall(in_dev);
 	if (ifa->ifa_dev != in_dev) {
-		BUG_TRAP(!ifa->ifa_dev);
+		WARN_ON(ifa->ifa_dev);
 		in_dev_hold(in_dev);
 		ifa->ifa_dev = in_dev;
 	}
@@ -1029,6 +1029,11 @@ skip:
 	}
 }
 
+static inline bool inetdev_valid_mtu(unsigned mtu)
+{
+	return mtu >= 68;
+}
+
 /* Called only under RTNL semaphore */
 
 static int inetdev_event(struct notifier_block *this, unsigned long event,
@@ -1048,6 +1053,10 @@ static int inetdev_event(struct notifier_block *this, unsigned long event,
 				IN_DEV_CONF_SET(in_dev, NOXFRM, 1);
 				IN_DEV_CONF_SET(in_dev, NOPOLICY, 1);
 			}
+		} else if (event == NETDEV_CHANGEMTU) {
+			/* Re-enabling IP */
+			if (inetdev_valid_mtu(dev->mtu))
+				in_dev = inetdev_init(dev);
 		}
 		goto out;
 	}
@@ -1058,7 +1067,7 @@ static int inetdev_event(struct notifier_block *this, unsigned long event,
 		dev->ip_ptr = NULL;
 		break;
 	case NETDEV_UP:
-		if (dev->mtu < 68)
+		if (!inetdev_valid_mtu(dev->mtu))
 			break;
 		if (dev->flags & IFF_LOOPBACK) {
 			struct in_ifaddr *ifa;
@@ -1080,9 +1089,9 @@ static int inetdev_event(struct notifier_block *this, unsigned long event,
 		ip_mc_down(in_dev);
 		break;
 	case NETDEV_CHANGEMTU:
-		if (dev->mtu >= 68)
+		if (inetdev_valid_mtu(dev->mtu))
 			break;
-		/* MTU falled under 68, disable IP */
+		/* disable IP when MTU is not enough */
 	case NETDEV_UNREGISTER:
 		inetdev_destroy(in_dev);
 		break;
diff --git a/net/ipv4/esp4.c b/net/ipv4/esp4.c
index 4e73e5708e70..21515d4c49eb 100644
--- a/net/ipv4/esp4.c
+++ b/net/ipv4/esp4.c
@@ -575,7 +575,7 @@ static int esp_init_state(struct xfrm_state *x)
 			      crypto_aead_ivsize(aead);
 	if (x->props.mode == XFRM_MODE_TUNNEL)
 		x->props.header_len += sizeof(struct iphdr);
-	else if (x->props.mode == XFRM_MODE_BEET)
+	else if (x->props.mode == XFRM_MODE_BEET && x->sel.family != AF_INET6)
 		x->props.header_len += IPV4_BEET_PHMAXLEN;
 	if (x->encap) {
 		struct xfrm_encap_tmpl *encap = x->encap;
diff --git a/net/ipv4/icmp.c b/net/ipv4/icmp.c
index 860558633b2c..55c355e63234 100644
--- a/net/ipv4/icmp.c
+++ b/net/ipv4/icmp.c
@@ -204,18 +204,22 @@ static struct sock *icmp_sk(struct net *net)
 	return net->ipv4.icmp_sk[smp_processor_id()];
 }
 
-static inline int icmp_xmit_lock(struct sock *sk)
+static inline struct sock *icmp_xmit_lock(struct net *net)
 {
+	struct sock *sk;
+
 	local_bh_disable();
 
+	sk = icmp_sk(net);
+
 	if (unlikely(!spin_trylock(&sk->sk_lock.slock))) {
 		/* This can happen if the output path signals a
 		 * dst_link_failure() for an outgoing ICMP packet.
 		 */
 		local_bh_enable();
-		return 1;
+		return NULL;
 	}
-	return 0;
+	return sk;
 }
 
 static inline void icmp_xmit_unlock(struct sock *sk)
@@ -354,15 +358,17 @@ static void icmp_reply(struct icmp_bxm *icmp_param, struct sk_buff *skb)
 	struct ipcm_cookie ipc;
 	struct rtable *rt = skb->rtable;
 	struct net *net = dev_net(rt->u.dst.dev);
-	struct sock *sk = icmp_sk(net);
-	struct inet_sock *inet = inet_sk(sk);
+	struct sock *sk;
+	struct inet_sock *inet;
 	__be32 daddr;
 
 	if (ip_options_echo(&icmp_param->replyopts, skb))
 		return;
 
-	if (icmp_xmit_lock(sk))
+	sk = icmp_xmit_lock(net);
+	if (sk == NULL)
 		return;
+	inet = inet_sk(sk);
 
 	icmp_param->data.icmph.checksum = 0;
 
@@ -419,7 +425,6 @@ void icmp_send(struct sk_buff *skb_in, int type, int code, __be32 info)
 	if (!rt)
 		goto out;
 	net = dev_net(rt->u.dst.dev);
-	sk = icmp_sk(net);
 
 	/*
 	 *	Find the original header. It is expected to be valid, of course.
@@ -483,7 +488,8 @@ void icmp_send(struct sk_buff *skb_in, int type, int code, __be32 info)
 		}
 	}
 
-	if (icmp_xmit_lock(sk))
+	sk = icmp_xmit_lock(net);
+	if (sk == NULL)
 		return;
 
 	/*
diff --git a/net/ipv4/igmp.c b/net/ipv4/igmp.c
index 6203ece53606..f70fac612596 100644
--- a/net/ipv4/igmp.c
+++ b/net/ipv4/igmp.c
@@ -289,6 +289,7 @@ static struct sk_buff *igmpv3_newpack(struct net_device *dev, int size)
 	struct rtable *rt;
 	struct iphdr *pip;
 	struct igmpv3_report *pig;
+	struct net *net = dev_net(dev);
 
 	skb = alloc_skb(size + LL_ALLOCATED_SPACE(dev), GFP_ATOMIC);
 	if (skb == NULL)
@@ -299,7 +300,7 @@ static struct sk_buff *igmpv3_newpack(struct net_device *dev, int size)
 				    .nl_u = { .ip4_u = {
 				    .daddr = IGMPV3_ALL_MCR } },
 				    .proto = IPPROTO_IGMP };
-		if (ip_route_output_key(&init_net, &rt, &fl)) {
+		if (ip_route_output_key(net, &rt, &fl)) {
 			kfree_skb(skb);
 			return NULL;
 		}
@@ -629,6 +630,7 @@ static int igmp_send_report(struct in_device *in_dev, struct ip_mc_list *pmc,
 	struct igmphdr *ih;
 	struct rtable *rt;
 	struct net_device *dev = in_dev->dev;
+	struct net *net = dev_net(dev);
 	__be32	group = pmc ? pmc->multiaddr : 0;
 	__be32	dst;
 
@@ -643,7 +645,7 @@ static int igmp_send_report(struct in_device *in_dev, struct ip_mc_list *pmc,
 		struct flowi fl = { .oif = dev->ifindex,
 				    .nl_u = { .ip4_u = { .daddr = dst } },
 				    .proto = IPPROTO_IGMP };
-		if (ip_route_output_key(&init_net, &rt, &fl))
+		if (ip_route_output_key(net, &rt, &fl))
 			return -1;
 	}
 	if (rt->rt_src == 0) {
@@ -1196,9 +1198,6 @@ void ip_mc_inc_group(struct in_device *in_dev, __be32 addr)
 
 	ASSERT_RTNL();
 
-	if (!net_eq(dev_net(in_dev->dev), &init_net))
-		return;
-
 	for (im=in_dev->mc_list; im; im=im->next) {
 		if (im->multiaddr == addr) {
 			im->users++;
@@ -1278,9 +1277,6 @@ void ip_mc_dec_group(struct in_device *in_dev, __be32 addr)
 
 	ASSERT_RTNL();
 
-	if (!net_eq(dev_net(in_dev->dev), &init_net))
-		return;
-
 	for (ip=&in_dev->mc_list; (i=*ip)!=NULL; ip=&i->next) {
 		if (i->multiaddr==addr) {
 			if (--i->users == 0) {
@@ -1308,9 +1304,6 @@ void ip_mc_down(struct in_device *in_dev)
 
 	ASSERT_RTNL();
 
-	if (!net_eq(dev_net(in_dev->dev), &init_net))
-		return;
-
 	for (i=in_dev->mc_list; i; i=i->next)
 		igmp_group_dropped(i);
 
@@ -1331,9 +1324,6 @@ void ip_mc_init_dev(struct in_device *in_dev)
 {
 	ASSERT_RTNL();
 
-	if (!net_eq(dev_net(in_dev->dev), &init_net))
-		return;
-
 	in_dev->mc_tomb = NULL;
 #ifdef CONFIG_IP_MULTICAST
 	in_dev->mr_gq_running = 0;
@@ -1357,9 +1347,6 @@ void ip_mc_up(struct in_device *in_dev)
 
 	ASSERT_RTNL();
 
-	if (!net_eq(dev_net(in_dev->dev), &init_net))
-		return;
-
 	ip_mc_inc_group(in_dev, IGMP_ALL_HOSTS);
 
 	for (i=in_dev->mc_list; i; i=i->next)
@@ -1376,9 +1363,6 @@ void ip_mc_destroy_dev(struct in_device *in_dev)
 
 	ASSERT_RTNL();
 
-	if (!net_eq(dev_net(in_dev->dev), &init_net))
-		return;
-
 	/* Deactivate timers */
 	ip_mc_down(in_dev);
 
@@ -1395,7 +1379,7 @@ void ip_mc_destroy_dev(struct in_device *in_dev)
 	write_unlock_bh(&in_dev->mc_list_lock);
 }
 
-static struct in_device * ip_mc_find_dev(struct ip_mreqn *imr)
+static struct in_device *ip_mc_find_dev(struct net *net, struct ip_mreqn *imr)
 {
 	struct flowi fl = { .nl_u = { .ip4_u =
 				      { .daddr = imr->imr_multiaddr.s_addr } } };
@@ -1404,19 +1388,19 @@ static struct in_device * ip_mc_find_dev(struct ip_mreqn *imr)
 	struct in_device *idev = NULL;
 
 	if (imr->imr_ifindex) {
-		idev = inetdev_by_index(&init_net, imr->imr_ifindex);
+		idev = inetdev_by_index(net, imr->imr_ifindex);
 		if (idev)
 			__in_dev_put(idev);
 		return idev;
 	}
 	if (imr->imr_address.s_addr) {
-		dev = ip_dev_find(&init_net, imr->imr_address.s_addr);
+		dev = ip_dev_find(net, imr->imr_address.s_addr);
 		if (!dev)
 			return NULL;
 		dev_put(dev);
 	}
 
-	if (!dev && !ip_route_output_key(&init_net, &rt, &fl)) {
+	if (!dev && !ip_route_output_key(net, &rt, &fl)) {
 		dev = rt->u.dst.dev;
 		ip_rt_put(rt);
 	}
@@ -1754,18 +1738,16 @@ int ip_mc_join_group(struct sock *sk , struct ip_mreqn *imr)
 	struct ip_mc_socklist *iml=NULL, *i;
 	struct in_device *in_dev;
 	struct inet_sock *inet = inet_sk(sk);
+	struct net *net = sock_net(sk);
 	int ifindex;
 	int count = 0;
 
 	if (!ipv4_is_multicast(addr))
 		return -EINVAL;
 
-	if (!net_eq(sock_net(sk), &init_net))
-		return -EPROTONOSUPPORT;
-
 	rtnl_lock();
 
-	in_dev = ip_mc_find_dev(imr);
+	in_dev = ip_mc_find_dev(net, imr);
 
 	if (!in_dev) {
 		iml = NULL;
@@ -1827,15 +1809,13 @@ int ip_mc_leave_group(struct sock *sk, struct ip_mreqn *imr)
 	struct inet_sock *inet = inet_sk(sk);
 	struct ip_mc_socklist *iml, **imlp;
 	struct in_device *in_dev;
+	struct net *net = sock_net(sk);
 	__be32 group = imr->imr_multiaddr.s_addr;
 	u32 ifindex;
 	int ret = -EADDRNOTAVAIL;
 
-	if (!net_eq(sock_net(sk), &init_net))
-		return -EPROTONOSUPPORT;
-
 	rtnl_lock();
-	in_dev = ip_mc_find_dev(imr);
+	in_dev = ip_mc_find_dev(net, imr);
 	ifindex = imr->imr_ifindex;
 	for (imlp = &inet->mc_list; (iml = *imlp) != NULL; imlp = &iml->next) {
 		if (iml->multi.imr_multiaddr.s_addr != group)
@@ -1873,21 +1853,19 @@ int ip_mc_source(int add, int omode, struct sock *sk, struct
 	struct in_device *in_dev = NULL;
 	struct inet_sock *inet = inet_sk(sk);
 	struct ip_sf_socklist *psl;
+	struct net *net = sock_net(sk);
 	int leavegroup = 0;
 	int i, j, rv;
 
 	if (!ipv4_is_multicast(addr))
 		return -EINVAL;
 
-	if (!net_eq(sock_net(sk), &init_net))
-		return -EPROTONOSUPPORT;
-
 	rtnl_lock();
 
 	imr.imr_multiaddr.s_addr = mreqs->imr_multiaddr;
 	imr.imr_address.s_addr = mreqs->imr_interface;
 	imr.imr_ifindex = ifindex;
-	in_dev = ip_mc_find_dev(&imr);
+	in_dev = ip_mc_find_dev(net, &imr);
 
 	if (!in_dev) {
 		err = -ENODEV;
@@ -2007,6 +1985,7 @@ int ip_mc_msfilter(struct sock *sk, struct ip_msfilter *msf, int ifindex)
 	struct in_device *in_dev;
 	struct inet_sock *inet = inet_sk(sk);
 	struct ip_sf_socklist *newpsl, *psl;
+	struct net *net = sock_net(sk);
 	int leavegroup = 0;
 
 	if (!ipv4_is_multicast(addr))
@@ -2015,15 +1994,12 @@ int ip_mc_msfilter(struct sock *sk, struct ip_msfilter *msf, int ifindex)
 	    msf->imsf_fmode != MCAST_EXCLUDE)
 		return -EINVAL;
 
-	if (!net_eq(sock_net(sk), &init_net))
-		return -EPROTONOSUPPORT;
-
 	rtnl_lock();
 
 	imr.imr_multiaddr.s_addr = msf->imsf_multiaddr;
 	imr.imr_address.s_addr = msf->imsf_interface;
 	imr.imr_ifindex = ifindex;
-	in_dev = ip_mc_find_dev(&imr);
+	in_dev = ip_mc_find_dev(net, &imr);
 
 	if (!in_dev) {
 		err = -ENODEV;
@@ -2094,19 +2070,17 @@ int ip_mc_msfget(struct sock *sk, struct ip_msfilter *msf,
 	struct in_device *in_dev;
 	struct inet_sock *inet = inet_sk(sk);
 	struct ip_sf_socklist *psl;
+	struct net *net = sock_net(sk);
 
 	if (!ipv4_is_multicast(addr))
 		return -EINVAL;
 
-	if (!net_eq(sock_net(sk), &init_net))
-		return -EPROTONOSUPPORT;
-
 	rtnl_lock();
 
 	imr.imr_multiaddr.s_addr = msf->imsf_multiaddr;
 	imr.imr_address.s_addr = msf->imsf_interface;
 	imr.imr_ifindex = 0;
-	in_dev = ip_mc_find_dev(&imr);
+	in_dev = ip_mc_find_dev(net, &imr);
 
 	if (!in_dev) {
 		err = -ENODEV;
@@ -2163,9 +2137,6 @@ int ip_mc_gsfget(struct sock *sk, struct group_filter *gsf,
 	if (!ipv4_is_multicast(addr))
 		return -EINVAL;
 
-	if (!net_eq(sock_net(sk), &init_net))
-		return -EPROTONOSUPPORT;
-
 	rtnl_lock();
 
 	err = -EADDRNOTAVAIL;
@@ -2246,19 +2217,17 @@ void ip_mc_drop_socket(struct sock *sk)
 {
 	struct inet_sock *inet = inet_sk(sk);
 	struct ip_mc_socklist *iml;
+	struct net *net = sock_net(sk);
 
 	if (inet->mc_list == NULL)
 		return;
 
-	if (!net_eq(sock_net(sk), &init_net))
-		return;
-
 	rtnl_lock();
 	while ((iml = inet->mc_list) != NULL) {
 		struct in_device *in_dev;
 		inet->mc_list = iml->next;
 
-		in_dev = inetdev_by_index(&init_net, iml->multi.imr_ifindex);
+		in_dev = inetdev_by_index(net, iml->multi.imr_ifindex);
 		(void) ip_mc_leave_src(sk, iml, in_dev);
 		if (in_dev != NULL) {
 			ip_mc_dec_group(in_dev, iml->multi.imr_multiaddr.s_addr);
diff --git a/net/ipv4/inet_connection_sock.c b/net/ipv4/inet_connection_sock.c
index bb81c958b744..0c1ae68ee84b 100644
--- a/net/ipv4/inet_connection_sock.c
+++ b/net/ipv4/inet_connection_sock.c
@@ -167,7 +167,7 @@ tb_not_found:
 success:
 	if (!inet_csk(sk)->icsk_bind_hash)
 		inet_bind_hash(sk, tb, snum);
-	BUG_TRAP(inet_csk(sk)->icsk_bind_hash == tb);
+	WARN_ON(inet_csk(sk)->icsk_bind_hash != tb);
 	ret = 0;
 
 fail_unlock:
@@ -260,7 +260,7 @@ struct sock *inet_csk_accept(struct sock *sk, int flags, int *err)
 	}
 
 	newsk = reqsk_queue_get_child(&icsk->icsk_accept_queue, sk);
-	BUG_TRAP(newsk->sk_state != TCP_SYN_RECV);
+	WARN_ON(newsk->sk_state == TCP_SYN_RECV);
 out:
 	release_sock(sk);
 	return newsk;
@@ -386,7 +386,7 @@ struct request_sock *inet_csk_search_req(const struct sock *sk,
 		    ireq->rmt_addr == raddr &&
 		    ireq->loc_addr == laddr &&
 		    AF_INET_FAMILY(req->rsk_ops->family)) {
-			BUG_TRAP(!req->sk);
+			WARN_ON(req->sk);
 			*prevp = prev;
 			break;
 		}
@@ -539,14 +539,14 @@ EXPORT_SYMBOL_GPL(inet_csk_clone);
  */
 void inet_csk_destroy_sock(struct sock *sk)
 {
-	BUG_TRAP(sk->sk_state == TCP_CLOSE);
-	BUG_TRAP(sock_flag(sk, SOCK_DEAD));
+	WARN_ON(sk->sk_state != TCP_CLOSE);
+	WARN_ON(!sock_flag(sk, SOCK_DEAD));
 
 	/* It cannot be in hash table! */
-	BUG_TRAP(sk_unhashed(sk));
+	WARN_ON(!sk_unhashed(sk));
 
 	/* If it has not 0 inet_sk(sk)->num, it must be bound */
-	BUG_TRAP(!inet_sk(sk)->num || inet_csk(sk)->icsk_bind_hash);
+	WARN_ON(inet_sk(sk)->num && !inet_csk(sk)->icsk_bind_hash);
 
 	sk->sk_prot->destroy(sk);
 
@@ -629,7 +629,7 @@ void inet_csk_listen_stop(struct sock *sk)
 
 		local_bh_disable();
 		bh_lock_sock(child);
-		BUG_TRAP(!sock_owned_by_user(child));
+		WARN_ON(sock_owned_by_user(child));
 		sock_hold(child);
 
 		sk->sk_prot->disconnect(child, O_NONBLOCK);
@@ -647,7 +647,7 @@ void inet_csk_listen_stop(struct sock *sk)
 		sk_acceptq_removed(sk);
 		__reqsk_free(req);
 	}
-	BUG_TRAP(!sk->sk_ack_backlog);
+	WARN_ON(sk->sk_ack_backlog);
 }
 
 EXPORT_SYMBOL_GPL(inet_csk_listen_stop);
diff --git a/net/ipv4/inet_fragment.c b/net/ipv4/inet_fragment.c
index 0546a0bc97ea..6c52e08f786e 100644
--- a/net/ipv4/inet_fragment.c
+++ b/net/ipv4/inet_fragment.c
@@ -134,8 +134,8 @@ void inet_frag_destroy(struct inet_frag_queue *q, struct inet_frags *f,
 	struct sk_buff *fp;
 	struct netns_frags *nf;
 
-	BUG_TRAP(q->last_in & INET_FRAG_COMPLETE);
-	BUG_TRAP(del_timer(&q->timer) == 0);
+	WARN_ON(!(q->last_in & INET_FRAG_COMPLETE));
+	WARN_ON(del_timer(&q->timer) != 0);
 
 	/* Release all fragment data. */
 	fp = q->fragments;
diff --git a/net/ipv4/inet_hashtables.c b/net/ipv4/inet_hashtables.c
index 115f53722d20..44981906fb91 100644
--- a/net/ipv4/inet_hashtables.c
+++ b/net/ipv4/inet_hashtables.c
@@ -305,7 +305,7 @@ unique:
 	inet->num = lport;
 	inet->sport = htons(lport);
 	sk->sk_hash = hash;
-	BUG_TRAP(sk_unhashed(sk));
+	WARN_ON(!sk_unhashed(sk));
 	__sk_add_node(sk, &head->chain);
 	sock_prot_inuse_add(sock_net(sk), sk->sk_prot, 1);
 	write_unlock(lock);
@@ -342,7 +342,7 @@ void __inet_hash_nolisten(struct sock *sk)
 	rwlock_t *lock;
 	struct inet_ehash_bucket *head;
 
-	BUG_TRAP(sk_unhashed(sk));
+	WARN_ON(!sk_unhashed(sk));
 
 	sk->sk_hash = inet_sk_ehashfn(sk);
 	head = inet_ehash_bucket(hashinfo, sk->sk_hash);
@@ -367,7 +367,7 @@ static void __inet_hash(struct sock *sk)
 		return;
 	}
 
-	BUG_TRAP(sk_unhashed(sk));
+	WARN_ON(!sk_unhashed(sk));
 	list = &hashinfo->listening_hash[inet_sk_listen_hashfn(sk)];
 	lock = &hashinfo->lhash_lock;
 
@@ -450,7 +450,7 @@ int __inet_hash_connect(struct inet_timewait_death_row *death_row,
 			 */
 			inet_bind_bucket_for_each(tb, node, &head->chain) {
 				if (tb->ib_net == net && tb->port == port) {
-					BUG_TRAP(!hlist_empty(&tb->owners));
+					WARN_ON(hlist_empty(&tb->owners));
 					if (tb->fastreuse >= 0)
 						goto next_port;
 					if (!check_established(death_row, sk,
diff --git a/net/ipv4/inet_timewait_sock.c b/net/ipv4/inet_timewait_sock.c
index 75c2def8f9a0..d985bd613d25 100644
--- a/net/ipv4/inet_timewait_sock.c
+++ b/net/ipv4/inet_timewait_sock.c
@@ -86,7 +86,7 @@ void __inet_twsk_hashdance(struct inet_timewait_sock *tw, struct sock *sk,
 			hashinfo->bhash_size)];
 	spin_lock(&bhead->lock);
 	tw->tw_tb = icsk->icsk_bind_hash;
-	BUG_TRAP(icsk->icsk_bind_hash);
+	WARN_ON(!icsk->icsk_bind_hash);
 	inet_twsk_add_bind_node(tw, &tw->tw_tb->owners);
 	spin_unlock(&bhead->lock);
 
diff --git a/net/ipv4/ip_fragment.c b/net/ipv4/ip_fragment.c
index 38d38f058018..2152d222b954 100644
--- a/net/ipv4/ip_fragment.c
+++ b/net/ipv4/ip_fragment.c
@@ -488,8 +488,8 @@ static int ip_frag_reasm(struct ipq *qp, struct sk_buff *prev,
 		qp->q.fragments = head;
 	}
 
-	BUG_TRAP(head != NULL);
-	BUG_TRAP(FRAG_CB(head)->offset == 0);
+	WARN_ON(head == NULL);
+	WARN_ON(FRAG_CB(head)->offset != 0);
 
 	/* Allocate a new buffer for the datagram. */
 	ihlen = ip_hdrlen(head);
diff --git a/net/ipv4/ip_output.c b/net/ipv4/ip_output.c
index 465544f6281a..d533a89e08de 100644
--- a/net/ipv4/ip_output.c
+++ b/net/ipv4/ip_output.c
@@ -118,7 +118,7 @@ static int ip_dev_loopback_xmit(struct sk_buff *newskb)
 	__skb_pull(newskb, skb_network_offset(newskb));
 	newskb->pkt_type = PACKET_LOOPBACK;
 	newskb->ip_summed = CHECKSUM_UNNECESSARY;
-	BUG_TRAP(newskb->dst);
+	WARN_ON(!newskb->dst);
 	netif_rx(newskb);
 	return 0;
 }
diff --git a/net/ipv4/ipcomp.c b/net/ipv4/ipcomp.c
index a75807b971b3..38ccb6dfb02e 100644
--- a/net/ipv4/ipcomp.c
+++ b/net/ipv4/ipcomp.c
@@ -14,153 +14,14 @@
  *   - Adaptive compression.
  */
 #include <linux/module.h>
-#include <linux/crypto.h>
 #include <linux/err.h>
-#include <linux/pfkeyv2.h>
-#include <linux/percpu.h>
-#include <linux/smp.h>
-#include <linux/list.h>
-#include <linux/vmalloc.h>
 #include <linux/rtnetlink.h>
-#include <linux/mutex.h>
 #include <net/ip.h>
 #include <net/xfrm.h>
 #include <net/icmp.h>
 #include <net/ipcomp.h>
 #include <net/protocol.h>
-
-struct ipcomp_tfms {
-	struct list_head list;
-	struct crypto_comp **tfms;
-	int users;
-};
-
-static DEFINE_MUTEX(ipcomp_resource_mutex);
-static void **ipcomp_scratches;
-static int ipcomp_scratch_users;
-static LIST_HEAD(ipcomp_tfms_list);
-
-static int ipcomp_decompress(struct xfrm_state *x, struct sk_buff *skb)
-{
-	struct ipcomp_data *ipcd = x->data;
-	const int plen = skb->len;
-	int dlen = IPCOMP_SCRATCH_SIZE;
-	const u8 *start = skb->data;
-	const int cpu = get_cpu();
-	u8 *scratch = *per_cpu_ptr(ipcomp_scratches, cpu);
-	struct crypto_comp *tfm = *per_cpu_ptr(ipcd->tfms, cpu);
-	int err = crypto_comp_decompress(tfm, start, plen, scratch, &dlen);
-
-	if (err)
-		goto out;
-
-	if (dlen < (plen + sizeof(struct ip_comp_hdr))) {
-		err = -EINVAL;
-		goto out;
-	}
-
-	err = pskb_expand_head(skb, 0, dlen - plen, GFP_ATOMIC);
-	if (err)
-		goto out;
-
-	skb->truesize += dlen - plen;
-	__skb_put(skb, dlen - plen);
-	skb_copy_to_linear_data(skb, scratch, dlen);
-out:
-	put_cpu();
-	return err;
-}
-
-static int ipcomp_input(struct xfrm_state *x, struct sk_buff *skb)
-{
-	int nexthdr;
-	int err = -ENOMEM;
-	struct ip_comp_hdr *ipch;
-
-	if (skb_linearize_cow(skb))
-		goto out;
-
-	skb->ip_summed = CHECKSUM_NONE;
-
-	/* Remove ipcomp header and decompress original payload */
-	ipch = (void *)skb->data;
-	nexthdr = ipch->nexthdr;
-
-	skb->transport_header = skb->network_header + sizeof(*ipch);
-	__skb_pull(skb, sizeof(*ipch));
-	err = ipcomp_decompress(x, skb);
-	if (err)
-		goto out;
-
-	err = nexthdr;
-
-out:
-	return err;
-}
-
-static int ipcomp_compress(struct xfrm_state *x, struct sk_buff *skb)
-{
-	struct ipcomp_data *ipcd = x->data;
-	const int plen = skb->len;
-	int dlen = IPCOMP_SCRATCH_SIZE;
-	u8 *start = skb->data;
-	const int cpu = get_cpu();
-	u8 *scratch = *per_cpu_ptr(ipcomp_scratches, cpu);
-	struct crypto_comp *tfm = *per_cpu_ptr(ipcd->tfms, cpu);
-	int err;
-
-	local_bh_disable();
-	err = crypto_comp_compress(tfm, start, plen, scratch, &dlen);
-	local_bh_enable();
-	if (err)
-		goto out;
-
-	if ((dlen + sizeof(struct ip_comp_hdr)) >= plen) {
-		err = -EMSGSIZE;
-		goto out;
-	}
-
-	memcpy(start + sizeof(struct ip_comp_hdr), scratch, dlen);
-	put_cpu();
-
-	pskb_trim(skb, dlen + sizeof(struct ip_comp_hdr));
-	return 0;
-
-out:
-	put_cpu();
-	return err;
-}
-
-static int ipcomp_output(struct xfrm_state *x, struct sk_buff *skb)
-{
-	int err;
-	struct ip_comp_hdr *ipch;
-	struct ipcomp_data *ipcd = x->data;
-
-	if (skb->len < ipcd->threshold) {
-		/* Don't bother compressing */
-		goto out_ok;
-	}
-
-	if (skb_linearize_cow(skb))
-		goto out_ok;
-
-	err = ipcomp_compress(x, skb);
-
-	if (err) {
-		goto out_ok;
-	}
-
-	/* Install ipcomp header, convert into ipcomp datagram. */
-	ipch = ip_comp_hdr(skb);
-	ipch->nexthdr = *skb_mac_header(skb);
-	ipch->flags = 0;
-	ipch->cpi = htons((u16 )ntohl(x->id.spi));
-	*skb_mac_header(skb) = IPPROTO_COMP;
-out_ok:
-	skb_push(skb, -skb_network_offset(skb));
-	return 0;
-}
+#include <net/sock.h>
 
 static void ipcomp4_err(struct sk_buff *skb, u32 info)
 {
@@ -241,155 +102,9 @@ out:
 	return err;
 }
 
-static void ipcomp_free_scratches(void)
-{
-	int i;
-	void **scratches;
-
-	if (--ipcomp_scratch_users)
-		return;
-
-	scratches = ipcomp_scratches;
-	if (!scratches)
-		return;
-
-	for_each_possible_cpu(i)
-		vfree(*per_cpu_ptr(scratches, i));
-
-	free_percpu(scratches);
-}
-
-static void **ipcomp_alloc_scratches(void)
-{
-	int i;
-	void **scratches;
-
-	if (ipcomp_scratch_users++)
-		return ipcomp_scratches;
-
-	scratches = alloc_percpu(void *);
-	if (!scratches)
-		return NULL;
-
-	ipcomp_scratches = scratches;
-
-	for_each_possible_cpu(i) {
-		void *scratch = vmalloc(IPCOMP_SCRATCH_SIZE);
-		if (!scratch)
-			return NULL;
-		*per_cpu_ptr(scratches, i) = scratch;
-	}
-
-	return scratches;
-}
-
-static void ipcomp_free_tfms(struct crypto_comp **tfms)
-{
-	struct ipcomp_tfms *pos;
-	int cpu;
-
-	list_for_each_entry(pos, &ipcomp_tfms_list, list) {
-		if (pos->tfms == tfms)
-			break;
-	}
-
-	BUG_TRAP(pos);
-
-	if (--pos->users)
-		return;
-
-	list_del(&pos->list);
-	kfree(pos);
-
-	if (!tfms)
-		return;
-
-	for_each_possible_cpu(cpu) {
-		struct crypto_comp *tfm = *per_cpu_ptr(tfms, cpu);
-		crypto_free_comp(tfm);
-	}
-	free_percpu(tfms);
-}
-
-static struct crypto_comp **ipcomp_alloc_tfms(const char *alg_name)
-{
-	struct ipcomp_tfms *pos;
-	struct crypto_comp **tfms;
-	int cpu;
-
-	/* This can be any valid CPU ID so we don't need locking. */
-	cpu = raw_smp_processor_id();
-
-	list_for_each_entry(pos, &ipcomp_tfms_list, list) {
-		struct crypto_comp *tfm;
-
-		tfms = pos->tfms;
-		tfm = *per_cpu_ptr(tfms, cpu);
-
-		if (!strcmp(crypto_comp_name(tfm), alg_name)) {
-			pos->users++;
-			return tfms;
-		}
-	}
-
-	pos = kmalloc(sizeof(*pos), GFP_KERNEL);
-	if (!pos)
-		return NULL;
-
-	pos->users = 1;
-	INIT_LIST_HEAD(&pos->list);
-	list_add(&pos->list, &ipcomp_tfms_list);
-
-	pos->tfms = tfms = alloc_percpu(struct crypto_comp *);
-	if (!tfms)
-		goto error;
-
-	for_each_possible_cpu(cpu) {
-		struct crypto_comp *tfm = crypto_alloc_comp(alg_name, 0,
-							    CRYPTO_ALG_ASYNC);
-		if (IS_ERR(tfm))
-			goto error;
-		*per_cpu_ptr(tfms, cpu) = tfm;
-	}
-
-	return tfms;
-
-error:
-	ipcomp_free_tfms(tfms);
-	return NULL;
-}
-
-static void ipcomp_free_data(struct ipcomp_data *ipcd)
+static int ipcomp4_init_state(struct xfrm_state *x)
 {
-	if (ipcd->tfms)
-		ipcomp_free_tfms(ipcd->tfms);
-	ipcomp_free_scratches();
-}
-
-static void ipcomp_destroy(struct xfrm_state *x)
-{
-	struct ipcomp_data *ipcd = x->data;
-	if (!ipcd)
-		return;
-	xfrm_state_delete_tunnel(x);
-	mutex_lock(&ipcomp_resource_mutex);
-	ipcomp_free_data(ipcd);
-	mutex_unlock(&ipcomp_resource_mutex);
-	kfree(ipcd);
-}
-
-static int ipcomp_init_state(struct xfrm_state *x)
-{
-	int err;
-	struct ipcomp_data *ipcd;
-	struct xfrm_algo_desc *calg_desc;
-
-	err = -EINVAL;
-	if (!x->calg)
-		goto out;
-
-	if (x->encap)
-		goto out;
+	int err = -EINVAL;
 
 	x->props.header_len = 0;
 	switch (x->props.mode) {
@@ -402,40 +117,22 @@ static int ipcomp_init_state(struct xfrm_state *x)
 		goto out;
 	}
 
-	err = -ENOMEM;
-	ipcd = kzalloc(sizeof(*ipcd), GFP_KERNEL);
-	if (!ipcd)
+	err = ipcomp_init_state(x);
+	if (err)
 		goto out;
 
-	mutex_lock(&ipcomp_resource_mutex);
-	if (!ipcomp_alloc_scratches())
-		goto error;
-
-	ipcd->tfms = ipcomp_alloc_tfms(x->calg->alg_name);
-	if (!ipcd->tfms)
-		goto error;
-	mutex_unlock(&ipcomp_resource_mutex);
-
 	if (x->props.mode == XFRM_MODE_TUNNEL) {
 		err = ipcomp_tunnel_attach(x);
 		if (err)
 			goto error_tunnel;
 	}
 
-	calg_desc = xfrm_calg_get_byname(x->calg->alg_name, 0);
-	BUG_ON(!calg_desc);
-	ipcd->threshold = calg_desc->uinfo.comp.threshold;
-	x->data = ipcd;
 	err = 0;
 out:
 	return err;
 
 error_tunnel:
-	mutex_lock(&ipcomp_resource_mutex);
-error:
-	ipcomp_free_data(ipcd);
-	mutex_unlock(&ipcomp_resource_mutex);
-	kfree(ipcd);
+	ipcomp_destroy(x);
 	goto out;
 }
 
@@ -443,7 +140,7 @@ static const struct xfrm_type ipcomp_type = {
 	.description	= "IPCOMP4",
 	.owner		= THIS_MODULE,
 	.proto	     	= IPPROTO_COMP,
-	.init_state	= ipcomp_init_state,
+	.init_state	= ipcomp4_init_state,
 	.destructor	= ipcomp_destroy,
 	.input		= ipcomp_input,
 	.output		= ipcomp_output
@@ -481,7 +178,7 @@ module_init(ipcomp4_init);
 module_exit(ipcomp4_fini);
 
 MODULE_LICENSE("GPL");
-MODULE_DESCRIPTION("IP Payload Compression Protocol (IPComp) - RFC3173");
+MODULE_DESCRIPTION("IP Payload Compression Protocol (IPComp/IPv4) - RFC3173");
 MODULE_AUTHOR("James Morris <jmorris@intercode.com.au>");
 
 MODULE_ALIAS_XFRM_TYPE(AF_INET, XFRM_PROTO_COMP);
diff --git a/net/ipv4/ipvs/ip_vs_app.c b/net/ipv4/ipvs/ip_vs_app.c
index 1f1897a1a702..201b8ea3020d 100644
--- a/net/ipv4/ipvs/ip_vs_app.c
+++ b/net/ipv4/ipvs/ip_vs_app.c
@@ -608,7 +608,7 @@ int ip_vs_skb_replace(struct sk_buff *skb, gfp_t pri,
 }
 
 
-int ip_vs_app_init(void)
+int __init ip_vs_app_init(void)
 {
 	/* we will replace it with proc_net_ipvs_create() soon */
 	proc_net_fops_create(&init_net, "ip_vs_app", 0, &ip_vs_app_fops);
diff --git a/net/ipv4/ipvs/ip_vs_conn.c b/net/ipv4/ipvs/ip_vs_conn.c
index f8bdae47a77f..44a6872dc245 100644
--- a/net/ipv4/ipvs/ip_vs_conn.c
+++ b/net/ipv4/ipvs/ip_vs_conn.c
@@ -965,7 +965,7 @@ static void ip_vs_conn_flush(void)
 }
 
 
-int ip_vs_conn_init(void)
+int __init ip_vs_conn_init(void)
 {
 	int idx;
 
diff --git a/net/ipv4/ipvs/ip_vs_ctl.c b/net/ipv4/ipvs/ip_vs_ctl.c
index 9a5ace0b4dd6..6379705a8dcb 100644
--- a/net/ipv4/ipvs/ip_vs_ctl.c
+++ b/net/ipv4/ipvs/ip_vs_ctl.c
@@ -683,9 +683,22 @@ static void
 ip_vs_zero_stats(struct ip_vs_stats *stats)
 {
 	spin_lock_bh(&stats->lock);
-	memset(stats, 0, (char *)&stats->lock - (char *)stats);
-	spin_unlock_bh(&stats->lock);
+
+	stats->conns = 0;
+	stats->inpkts = 0;
+	stats->outpkts = 0;
+	stats->inbytes = 0;
+	stats->outbytes = 0;
+
+	stats->cps = 0;
+	stats->inpps = 0;
+	stats->outpps = 0;
+	stats->inbps = 0;
+	stats->outbps = 0;
+
 	ip_vs_zero_estimator(stats);
+
+	spin_unlock_bh(&stats->lock);
 }
 
 /*
@@ -1589,7 +1602,7 @@ static struct ctl_table vs_vars[] = {
 	{ .ctl_name = 0 }
 };
 
-struct ctl_path net_vs_ctl_path[] = {
+const struct ctl_path net_vs_ctl_path[] = {
 	{ .procname = "net", .ctl_name = CTL_NET, },
 	{ .procname = "ipv4", .ctl_name = NET_IPV4, },
 	{ .procname = "vs", },
@@ -1784,7 +1797,9 @@ static const struct file_operations ip_vs_info_fops = {
 
 #endif
 
-struct ip_vs_stats ip_vs_stats;
+struct ip_vs_stats ip_vs_stats = {
+	.lock = __SPIN_LOCK_UNLOCKED(ip_vs_stats.lock),
+};
 
 #ifdef CONFIG_PROC_FS
 static int ip_vs_stats_show(struct seq_file *seq, void *v)
@@ -2306,7 +2321,7 @@ static struct nf_sockopt_ops ip_vs_sockopts = {
 };
 
 
-int ip_vs_control_init(void)
+int __init ip_vs_control_init(void)
 {
 	int ret;
 	int idx;
@@ -2333,8 +2348,6 @@ int ip_vs_control_init(void)
 		INIT_LIST_HEAD(&ip_vs_rtable[idx]);
 	}
 
-	memset(&ip_vs_stats, 0, sizeof(ip_vs_stats));
-	spin_lock_init(&ip_vs_stats.lock);
 	ip_vs_new_estimator(&ip_vs_stats);
 
 	/* Hook the defense timer */
diff --git a/net/ipv4/ipvs/ip_vs_dh.c b/net/ipv4/ipvs/ip_vs_dh.c
index 8afc1503ed20..fa66824d264f 100644
--- a/net/ipv4/ipvs/ip_vs_dh.c
+++ b/net/ipv4/ipvs/ip_vs_dh.c
@@ -233,6 +233,7 @@ static struct ip_vs_scheduler ip_vs_dh_scheduler =
 	.name =			"dh",
 	.refcnt =		ATOMIC_INIT(0),
 	.module =		THIS_MODULE,
+	.n_list =		LIST_HEAD_INIT(ip_vs_dh_scheduler.n_list),
 	.init_service =		ip_vs_dh_init_svc,
 	.done_service =		ip_vs_dh_done_svc,
 	.update_service =	ip_vs_dh_update_svc,
@@ -242,7 +243,6 @@ static struct ip_vs_scheduler ip_vs_dh_scheduler =
 
 static int __init ip_vs_dh_init(void)
 {
-	INIT_LIST_HEAD(&ip_vs_dh_scheduler.n_list);
 	return register_ip_vs_scheduler(&ip_vs_dh_scheduler);
 }
 
diff --git a/net/ipv4/ipvs/ip_vs_est.c b/net/ipv4/ipvs/ip_vs_est.c
index bc04eedd6dbb..5a20f93bd7f9 100644
--- a/net/ipv4/ipvs/ip_vs_est.c
+++ b/net/ipv4/ipvs/ip_vs_est.c
@@ -17,6 +17,7 @@
 #include <linux/types.h>
 #include <linux/interrupt.h>
 #include <linux/sysctl.h>
+#include <linux/list.h>
 
 #include <net/ip_vs.h>
 
@@ -44,28 +45,11 @@
  */
 
 
-struct ip_vs_estimator
-{
-	struct ip_vs_estimator	*next;
-	struct ip_vs_stats	*stats;
-
-	u32			last_conns;
-	u32			last_inpkts;
-	u32			last_outpkts;
-	u64			last_inbytes;
-	u64			last_outbytes;
-
-	u32			cps;
-	u32			inpps;
-	u32			outpps;
-	u32			inbps;
-	u32			outbps;
-};
-
+static void estimation_timer(unsigned long arg);
 
-static struct ip_vs_estimator *est_list = NULL;
-static DEFINE_RWLOCK(est_lock);
-static struct timer_list est_timer;
+static LIST_HEAD(est_list);
+static DEFINE_SPINLOCK(est_lock);
+static DEFINE_TIMER(est_timer, estimation_timer, 0, 0);
 
 static void estimation_timer(unsigned long arg)
 {
@@ -76,9 +60,9 @@ static void estimation_timer(unsigned long arg)
 	u64 n_inbytes, n_outbytes;
 	u32 rate;
 
-	read_lock(&est_lock);
-	for (e = est_list; e; e = e->next) {
-		s = e->stats;
+	spin_lock(&est_lock);
+	list_for_each_entry(e, &est_list, list) {
+		s = container_of(e, struct ip_vs_stats, est);
 
 		spin_lock(&s->lock);
 		n_conns = s->conns;
@@ -114,19 +98,16 @@ static void estimation_timer(unsigned long arg)
 		s->outbps = (e->outbps+0xF)>>5;
 		spin_unlock(&s->lock);
 	}
-	read_unlock(&est_lock);
+	spin_unlock(&est_lock);
 	mod_timer(&est_timer, jiffies + 2*HZ);
 }
 
-int ip_vs_new_estimator(struct ip_vs_stats *stats)
+void ip_vs_new_estimator(struct ip_vs_stats *stats)
 {
-	struct ip_vs_estimator *est;
+	struct ip_vs_estimator *est = &stats->est;
 
-	est = kzalloc(sizeof(*est), GFP_KERNEL);
-	if (est == NULL)
-		return -ENOMEM;
+	INIT_LIST_HEAD(&est->list);
 
-	est->stats = stats;
 	est->last_conns = stats->conns;
 	est->cps = stats->cps<<10;
 
@@ -142,59 +123,40 @@ int ip_vs_new_estimator(struct ip_vs_stats *stats)
 	est->last_outbytes = stats->outbytes;
 	est->outbps = stats->outbps<<5;
 
-	write_lock_bh(&est_lock);
-	est->next = est_list;
-	if (est->next == NULL) {
-		setup_timer(&est_timer, estimation_timer, 0);
-		est_timer.expires = jiffies + 2*HZ;
-		add_timer(&est_timer);
-	}
-	est_list = est;
-	write_unlock_bh(&est_lock);
-	return 0;
+	spin_lock_bh(&est_lock);
+	if (list_empty(&est_list))
+		mod_timer(&est_timer, jiffies + 2 * HZ);
+	list_add(&est->list, &est_list);
+	spin_unlock_bh(&est_lock);
 }
 
 void ip_vs_kill_estimator(struct ip_vs_stats *stats)
 {
-	struct ip_vs_estimator *est, **pest;
-	int killed = 0;
-
-	write_lock_bh(&est_lock);
-	pest = &est_list;
-	while ((est=*pest) != NULL) {
-		if (est->stats != stats) {
-			pest = &est->next;
-			continue;
-		}
-		*pest = est->next;
-		kfree(est);
-		killed++;
+	struct ip_vs_estimator *est = &stats->est;
+
+	spin_lock_bh(&est_lock);
+	list_del(&est->list);
+	while (list_empty(&est_list) && try_to_del_timer_sync(&est_timer) < 0) {
+		spin_unlock_bh(&est_lock);
+		cpu_relax();
+		spin_lock_bh(&est_lock);
 	}
-	if (killed && est_list == NULL)
-		del_timer_sync(&est_timer);
-	write_unlock_bh(&est_lock);
+	spin_unlock_bh(&est_lock);
 }
 
 void ip_vs_zero_estimator(struct ip_vs_stats *stats)
 {
-	struct ip_vs_estimator *e;
-
-	write_lock_bh(&est_lock);
-	for (e = est_list; e; e = e->next) {
-		if (e->stats != stats)
-			continue;
-
-		/* set counters zero */
-		e->last_conns = 0;
-		e->last_inpkts = 0;
-		e->last_outpkts = 0;
-		e->last_inbytes = 0;
-		e->last_outbytes = 0;
-		e->cps = 0;
-		e->inpps = 0;
-		e->outpps = 0;
-		e->inbps = 0;
-		e->outbps = 0;
-	}
-	write_unlock_bh(&est_lock);
+	struct ip_vs_estimator *est = &stats->est;
+
+	/* set counters zero, caller must hold the stats->lock lock */
+	est->last_inbytes = 0;
+	est->last_outbytes = 0;
+	est->last_conns = 0;
+	est->last_inpkts = 0;
+	est->last_outpkts = 0;
+	est->cps = 0;
+	est->inpps = 0;
+	est->outpps = 0;
+	est->inbps = 0;
+	est->outbps = 0;
 }
diff --git a/net/ipv4/ipvs/ip_vs_lblc.c b/net/ipv4/ipvs/ip_vs_lblc.c
index 0efa3db4b180..7a6a319f544a 100644
--- a/net/ipv4/ipvs/ip_vs_lblc.c
+++ b/net/ipv4/ipvs/ip_vs_lblc.c
@@ -539,6 +539,7 @@ static struct ip_vs_scheduler ip_vs_lblc_scheduler =
 	.name =			"lblc",
 	.refcnt =		ATOMIC_INIT(0),
 	.module =		THIS_MODULE,
+	.n_list =		LIST_HEAD_INIT(ip_vs_lblc_scheduler.n_list),
 	.init_service =		ip_vs_lblc_init_svc,
 	.done_service =		ip_vs_lblc_done_svc,
 	.update_service =	ip_vs_lblc_update_svc,
@@ -550,7 +551,6 @@ static int __init ip_vs_lblc_init(void)
 {
 	int ret;
 
-	INIT_LIST_HEAD(&ip_vs_lblc_scheduler.n_list);
 	sysctl_header = register_sysctl_paths(net_vs_ctl_path, vs_vars_table);
 	ret = register_ip_vs_scheduler(&ip_vs_lblc_scheduler);
 	if (ret)
diff --git a/net/ipv4/ipvs/ip_vs_lblcr.c b/net/ipv4/ipvs/ip_vs_lblcr.c
index 8e3bbeb45138..c234e73968a6 100644
--- a/net/ipv4/ipvs/ip_vs_lblcr.c
+++ b/net/ipv4/ipvs/ip_vs_lblcr.c
@@ -728,6 +728,7 @@ static struct ip_vs_scheduler ip_vs_lblcr_scheduler =
 	.name =			"lblcr",
 	.refcnt =		ATOMIC_INIT(0),
 	.module =		THIS_MODULE,
+	.n_list =		LIST_HEAD_INIT(ip_vs_lblcr_scheduler.n_list),
 	.init_service =		ip_vs_lblcr_init_svc,
 	.done_service =		ip_vs_lblcr_done_svc,
 	.update_service =	ip_vs_lblcr_update_svc,
@@ -739,7 +740,6 @@ static int __init ip_vs_lblcr_init(void)
 {
 	int ret;
 
-	INIT_LIST_HEAD(&ip_vs_lblcr_scheduler.n_list);
 	sysctl_header = register_sysctl_paths(net_vs_ctl_path, vs_vars_table);
 	ret = register_ip_vs_scheduler(&ip_vs_lblcr_scheduler);
 	if (ret)
diff --git a/net/ipv4/ipvs/ip_vs_lc.c b/net/ipv4/ipvs/ip_vs_lc.c
index ac9f08e065d5..ebcdbf75ac65 100644
--- a/net/ipv4/ipvs/ip_vs_lc.c
+++ b/net/ipv4/ipvs/ip_vs_lc.c
@@ -98,6 +98,7 @@ static struct ip_vs_scheduler ip_vs_lc_scheduler = {
 	.name =			"lc",
 	.refcnt =		ATOMIC_INIT(0),
 	.module =		THIS_MODULE,
+	.n_list =		LIST_HEAD_INIT(ip_vs_lc_scheduler.n_list),
 	.init_service =		ip_vs_lc_init_svc,
 	.done_service =		ip_vs_lc_done_svc,
 	.update_service =	ip_vs_lc_update_svc,
@@ -107,7 +108,6 @@ static struct ip_vs_scheduler ip_vs_lc_scheduler = {
 
 static int __init ip_vs_lc_init(void)
 {
-	INIT_LIST_HEAD(&ip_vs_lc_scheduler.n_list);
 	return register_ip_vs_scheduler(&ip_vs_lc_scheduler) ;
 }
 
diff --git a/net/ipv4/ipvs/ip_vs_nq.c b/net/ipv4/ipvs/ip_vs_nq.c
index a46bf258d420..92f3a6770031 100644
--- a/net/ipv4/ipvs/ip_vs_nq.c
+++ b/net/ipv4/ipvs/ip_vs_nq.c
@@ -136,6 +136,7 @@ static struct ip_vs_scheduler ip_vs_nq_scheduler =
 	.name =			"nq",
 	.refcnt =		ATOMIC_INIT(0),
 	.module =		THIS_MODULE,
+	.n_list =		LIST_HEAD_INIT(ip_vs_nq_scheduler.n_list),
 	.init_service =		ip_vs_nq_init_svc,
 	.done_service =		ip_vs_nq_done_svc,
 	.update_service =	ip_vs_nq_update_svc,
@@ -145,7 +146,6 @@ static struct ip_vs_scheduler ip_vs_nq_scheduler =
 
 static int __init ip_vs_nq_init(void)
 {
-	INIT_LIST_HEAD(&ip_vs_nq_scheduler.n_list);
 	return register_ip_vs_scheduler(&ip_vs_nq_scheduler);
 }
 
diff --git a/net/ipv4/ipvs/ip_vs_proto.c b/net/ipv4/ipvs/ip_vs_proto.c
index 876714f23d65..6099a88fc200 100644
--- a/net/ipv4/ipvs/ip_vs_proto.c
+++ b/net/ipv4/ipvs/ip_vs_proto.c
@@ -43,7 +43,7 @@ static struct ip_vs_protocol *ip_vs_proto_table[IP_VS_PROTO_TAB_SIZE];
 /*
  *	register an ipvs protocol
  */
-static int __used register_ip_vs_protocol(struct ip_vs_protocol *pp)
+static int __used __init register_ip_vs_protocol(struct ip_vs_protocol *pp)
 {
 	unsigned hash = IP_VS_PROTO_HASH(pp->protocol);
 
@@ -190,7 +190,7 @@ ip_vs_tcpudp_debug_packet(struct ip_vs_protocol *pp,
 }
 
 
-int ip_vs_protocol_init(void)
+int __init ip_vs_protocol_init(void)
 {
 	char protocols[64];
 #define REGISTER_PROTOCOL(p)			\
diff --git a/net/ipv4/ipvs/ip_vs_rr.c b/net/ipv4/ipvs/ip_vs_rr.c
index c8db12d39e61..358110d17e59 100644
--- a/net/ipv4/ipvs/ip_vs_rr.c
+++ b/net/ipv4/ipvs/ip_vs_rr.c
@@ -94,6 +94,7 @@ static struct ip_vs_scheduler ip_vs_rr_scheduler = {
 	.name =			"rr",			/* name */
 	.refcnt =		ATOMIC_INIT(0),
 	.module =		THIS_MODULE,
+	.n_list =		LIST_HEAD_INIT(ip_vs_rr_scheduler.n_list),
 	.init_service =		ip_vs_rr_init_svc,
 	.done_service =		ip_vs_rr_done_svc,
 	.update_service =	ip_vs_rr_update_svc,
@@ -102,7 +103,6 @@ static struct ip_vs_scheduler ip_vs_rr_scheduler = {
 
 static int __init ip_vs_rr_init(void)
 {
-	INIT_LIST_HEAD(&ip_vs_rr_scheduler.n_list);
 	return register_ip_vs_scheduler(&ip_vs_rr_scheduler);
 }
 
diff --git a/net/ipv4/ipvs/ip_vs_sched.c b/net/ipv4/ipvs/ip_vs_sched.c
index b64767309855..a46ad9e35016 100644
--- a/net/ipv4/ipvs/ip_vs_sched.c
+++ b/net/ipv4/ipvs/ip_vs_sched.c
@@ -184,7 +184,7 @@ int register_ip_vs_scheduler(struct ip_vs_scheduler *scheduler)
 
 	write_lock_bh(&__ip_vs_sched_lock);
 
-	if (scheduler->n_list.next != &scheduler->n_list) {
+	if (!list_empty(&scheduler->n_list)) {
 		write_unlock_bh(&__ip_vs_sched_lock);
 		ip_vs_use_count_dec();
 		IP_VS_ERR("register_ip_vs_scheduler(): [%s] scheduler "
@@ -229,7 +229,7 @@ int unregister_ip_vs_scheduler(struct ip_vs_scheduler *scheduler)
 	}
 
 	write_lock_bh(&__ip_vs_sched_lock);
-	if (scheduler->n_list.next == &scheduler->n_list) {
+	if (list_empty(&scheduler->n_list)) {
 		write_unlock_bh(&__ip_vs_sched_lock);
 		IP_VS_ERR("unregister_ip_vs_scheduler(): [%s] scheduler "
 			  "is not in the list. failed\n", scheduler->name);
diff --git a/net/ipv4/ipvs/ip_vs_sed.c b/net/ipv4/ipvs/ip_vs_sed.c
index 2a7d31358181..77663d84cbd1 100644
--- a/net/ipv4/ipvs/ip_vs_sed.c
+++ b/net/ipv4/ipvs/ip_vs_sed.c
@@ -138,6 +138,7 @@ static struct ip_vs_scheduler ip_vs_sed_scheduler =
 	.name =			"sed",
 	.refcnt =		ATOMIC_INIT(0),
 	.module =		THIS_MODULE,
+	.n_list =		LIST_HEAD_INIT(ip_vs_sed_scheduler.n_list),
 	.init_service =		ip_vs_sed_init_svc,
 	.done_service =		ip_vs_sed_done_svc,
 	.update_service =	ip_vs_sed_update_svc,
@@ -147,7 +148,6 @@ static struct ip_vs_scheduler ip_vs_sed_scheduler =
 
 static int __init ip_vs_sed_init(void)
 {
-	INIT_LIST_HEAD(&ip_vs_sed_scheduler.n_list);
 	return register_ip_vs_scheduler(&ip_vs_sed_scheduler);
 }
 
diff --git a/net/ipv4/ipvs/ip_vs_sh.c b/net/ipv4/ipvs/ip_vs_sh.c
index b8fdfac65001..7b979e228056 100644
--- a/net/ipv4/ipvs/ip_vs_sh.c
+++ b/net/ipv4/ipvs/ip_vs_sh.c
@@ -230,6 +230,7 @@ static struct ip_vs_scheduler ip_vs_sh_scheduler =
 	.name =			"sh",
 	.refcnt =		ATOMIC_INIT(0),
 	.module =		THIS_MODULE,
+	.n_list	 =		LIST_HEAD_INIT(ip_vs_sh_scheduler.n_list),
 	.init_service =		ip_vs_sh_init_svc,
 	.done_service =		ip_vs_sh_done_svc,
 	.update_service =	ip_vs_sh_update_svc,
@@ -239,7 +240,6 @@ static struct ip_vs_scheduler ip_vs_sh_scheduler =
 
 static int __init ip_vs_sh_init(void)
 {
-	INIT_LIST_HEAD(&ip_vs_sh_scheduler.n_list);
 	return register_ip_vs_scheduler(&ip_vs_sh_scheduler);
 }
 
diff --git a/net/ipv4/ipvs/ip_vs_sync.c b/net/ipv4/ipvs/ip_vs_sync.c
index 45e9bd96c286..a652da2c3200 100644
--- a/net/ipv4/ipvs/ip_vs_sync.c
+++ b/net/ipv4/ipvs/ip_vs_sync.c
@@ -904,9 +904,9 @@ int stop_sync_thread(int state)
 		 * progress of stopping the master sync daemon.
 		 */
 
-		spin_lock(&ip_vs_sync_lock);
+		spin_lock_bh(&ip_vs_sync_lock);
 		ip_vs_sync_state &= ~IP_VS_STATE_MASTER;
-		spin_unlock(&ip_vs_sync_lock);
+		spin_unlock_bh(&ip_vs_sync_lock);
 		kthread_stop(sync_master_thread);
 		sync_master_thread = NULL;
 	} else if (state == IP_VS_STATE_BACKUP) {
diff --git a/net/ipv4/ipvs/ip_vs_wlc.c b/net/ipv4/ipvs/ip_vs_wlc.c
index 772c3cb4eca1..9b0ef86bb1f7 100644
--- a/net/ipv4/ipvs/ip_vs_wlc.c
+++ b/net/ipv4/ipvs/ip_vs_wlc.c
@@ -126,6 +126,7 @@ static struct ip_vs_scheduler ip_vs_wlc_scheduler =
 	.name =			"wlc",
 	.refcnt =		ATOMIC_INIT(0),
 	.module =		THIS_MODULE,
+	.n_list =		LIST_HEAD_INIT(ip_vs_wlc_scheduler.n_list),
 	.init_service =		ip_vs_wlc_init_svc,
 	.done_service =		ip_vs_wlc_done_svc,
 	.update_service =	ip_vs_wlc_update_svc,
@@ -135,7 +136,6 @@ static struct ip_vs_scheduler ip_vs_wlc_scheduler =
 
 static int __init ip_vs_wlc_init(void)
 {
-	INIT_LIST_HEAD(&ip_vs_wlc_scheduler.n_list);
 	return register_ip_vs_scheduler(&ip_vs_wlc_scheduler);
 }
 
diff --git a/net/ipv4/ipvs/ip_vs_wrr.c b/net/ipv4/ipvs/ip_vs_wrr.c
index 1d6932d7dc97..0d86a79b87b5 100644
--- a/net/ipv4/ipvs/ip_vs_wrr.c
+++ b/net/ipv4/ipvs/ip_vs_wrr.c
@@ -212,6 +212,7 @@ static struct ip_vs_scheduler ip_vs_wrr_scheduler = {
 	.name =			"wrr",
 	.refcnt =		ATOMIC_INIT(0),
 	.module =		THIS_MODULE,
+	.n_list =		LIST_HEAD_INIT(ip_vs_wrr_scheduler.n_list),
 	.init_service =		ip_vs_wrr_init_svc,
 	.done_service =		ip_vs_wrr_done_svc,
 	.update_service =	ip_vs_wrr_update_svc,
@@ -220,7 +221,6 @@ static struct ip_vs_scheduler ip_vs_wrr_scheduler = {
 
 static int __init ip_vs_wrr_init(void)
 {
-	INIT_LIST_HEAD(&ip_vs_wrr_scheduler.n_list);
 	return register_ip_vs_scheduler(&ip_vs_wrr_scheduler) ;
 }
 
diff --git a/net/ipv4/netfilter/arptable_filter.c b/net/ipv4/netfilter/arptable_filter.c
index 3be4d07e7ed9..082f5dd3156c 100644
--- a/net/ipv4/netfilter/arptable_filter.c
+++ b/net/ipv4/netfilter/arptable_filter.c
@@ -55,32 +55,53 @@ static struct xt_table packet_filter = {
 };
 
 /* The work comes in here from netfilter.c */
-static unsigned int arpt_hook(unsigned int hook,
-			      struct sk_buff *skb,
-			      const struct net_device *in,
-			      const struct net_device *out,
-			      int (*okfn)(struct sk_buff *))
+static unsigned int arpt_in_hook(unsigned int hook,
+				 struct sk_buff *skb,
+				 const struct net_device *in,
+				 const struct net_device *out,
+				 int (*okfn)(struct sk_buff *))
 {
-	return arpt_do_table(skb, hook, in, out, init_net.ipv4.arptable_filter);
+	return arpt_do_table(skb, hook, in, out,
+			     dev_net(in)->ipv4.arptable_filter);
+}
+
+static unsigned int arpt_out_hook(unsigned int hook,
+				  struct sk_buff *skb,
+				  const struct net_device *in,
+				  const struct net_device *out,
+				  int (*okfn)(struct sk_buff *))
+{
+	return arpt_do_table(skb, hook, in, out,
+			     dev_net(out)->ipv4.arptable_filter);
+}
+
+static unsigned int arpt_forward_hook(unsigned int hook,
+				      struct sk_buff *skb,
+				      const struct net_device *in,
+				      const struct net_device *out,
+				      int (*okfn)(struct sk_buff *))
+{
+	return arpt_do_table(skb, hook, in, out,
+			     dev_net(in)->ipv4.arptable_filter);
 }
 
 static struct nf_hook_ops arpt_ops[] __read_mostly = {
 	{
-		.hook		= arpt_hook,
+		.hook		= arpt_in_hook,
 		.owner		= THIS_MODULE,
 		.pf		= NF_ARP,
 		.hooknum	= NF_ARP_IN,
 		.priority	= NF_IP_PRI_FILTER,
 	},
 	{
-		.hook		= arpt_hook,
+		.hook		= arpt_out_hook,
 		.owner		= THIS_MODULE,
 		.pf		= NF_ARP,
 		.hooknum	= NF_ARP_OUT,
 		.priority	= NF_IP_PRI_FILTER,
 	},
 	{
-		.hook		= arpt_hook,
+		.hook		= arpt_forward_hook,
 		.owner		= THIS_MODULE,
 		.pf		= NF_ARP,
 		.hooknum	= NF_ARP_FORWARD,
diff --git a/net/ipv4/netfilter/ipt_CLUSTERIP.c b/net/ipv4/netfilter/ipt_CLUSTERIP.c
index 1819ad7ab910..fafe8ebb4c55 100644
--- a/net/ipv4/netfilter/ipt_CLUSTERIP.c
+++ b/net/ipv4/netfilter/ipt_CLUSTERIP.c
@@ -475,11 +475,10 @@ static void arp_print(struct arp_payload *payload)
 #define HBUFFERLEN 30
 	char hbuffer[HBUFFERLEN];
 	int j,k;
-	const char hexbuf[]= "0123456789abcdef";
 
 	for (k=0, j=0; k < HBUFFERLEN-3 && j < ETH_ALEN; j++) {
-		hbuffer[k++]=hexbuf[(payload->src_hw[j]>>4)&15];
-		hbuffer[k++]=hexbuf[payload->src_hw[j]&15];
+		hbuffer[k++] = hex_asc_hi(payload->src_hw[j]);
+		hbuffer[k++] = hex_asc_lo(payload->src_hw[j]);
 		hbuffer[k++]=':';
 	}
 	hbuffer[--k]='\0';
diff --git a/net/ipv4/netfilter/ipt_addrtype.c b/net/ipv4/netfilter/ipt_addrtype.c
index 49587a497229..462a22c97877 100644
--- a/net/ipv4/netfilter/ipt_addrtype.c
+++ b/net/ipv4/netfilter/ipt_addrtype.c
@@ -70,7 +70,7 @@ addrtype_mt_v1(const struct sk_buff *skb, const struct net_device *in,
 		       (info->flags & IPT_ADDRTYPE_INVERT_SOURCE);
 	if (ret && info->dest)
 		ret &= match_type(dev, iph->daddr, info->dest) ^
-		       (info->flags & IPT_ADDRTYPE_INVERT_DEST);
+		       !!(info->flags & IPT_ADDRTYPE_INVERT_DEST);
 	return ret;
 }
 
diff --git a/net/ipv4/netfilter/ipt_recent.c b/net/ipv4/netfilter/ipt_recent.c
index 21cb053f5d7d..3974d7cae5c0 100644
--- a/net/ipv4/netfilter/ipt_recent.c
+++ b/net/ipv4/netfilter/ipt_recent.c
@@ -305,10 +305,10 @@ static void recent_mt_destroy(const struct xt_match *match, void *matchinfo)
 		spin_lock_bh(&recent_lock);
 		list_del(&t->list);
 		spin_unlock_bh(&recent_lock);
-		recent_table_flush(t);
 #ifdef CONFIG_PROC_FS
 		remove_proc_entry(t->name, proc_dir);
 #endif
+		recent_table_flush(t);
 		kfree(t);
 	}
 	mutex_unlock(&recent_mutex);
diff --git a/net/ipv4/netfilter/iptable_security.c b/net/ipv4/netfilter/iptable_security.c
index 2b472ac2263a..db6d312128e1 100644
--- a/net/ipv4/netfilter/iptable_security.c
+++ b/net/ipv4/netfilter/iptable_security.c
@@ -32,7 +32,7 @@ static struct
 	struct ipt_replace repl;
 	struct ipt_standard entries[3];
 	struct ipt_error term;
-} initial_table __initdata = {
+} initial_table __net_initdata = {
 	.repl = {
 		.name = "security",
 		.valid_hooks = SECURITY_VALID_HOOKS,
diff --git a/net/ipv4/netfilter/nf_nat_proto_common.c b/net/ipv4/netfilter/nf_nat_proto_common.c
index 91537f11273f..6c4f11f51446 100644
--- a/net/ipv4/netfilter/nf_nat_proto_common.c
+++ b/net/ipv4/netfilter/nf_nat_proto_common.c
@@ -73,9 +73,13 @@ bool nf_nat_proto_unique_tuple(struct nf_conntrack_tuple *tuple,
 		range_size = ntohs(range->max.all) - min + 1;
 	}
 
-	off = *rover;
 	if (range->flags & IP_NAT_RANGE_PROTO_RANDOM)
-		off = net_random();
+		off = secure_ipv4_port_ephemeral(tuple->src.u3.ip, tuple->dst.u3.ip,
+						 maniptype == IP_NAT_MANIP_SRC
+						 ? tuple->dst.u.all
+						 : tuple->src.u.all);
+	else
+		off = *rover;
 
 	for (i = 0; i < range_size; i++, off++) {
 		*portptr = htons(min + off % range_size);
diff --git a/net/ipv4/proc.c b/net/ipv4/proc.c
index 834356ea99df..8f5a403f6f6b 100644
--- a/net/ipv4/proc.c
+++ b/net/ipv4/proc.c
@@ -232,6 +232,8 @@ static const struct snmp_mib snmp4_net_list[] = {
 	SNMP_MIB_ITEM("TCPDSACKIgnoredOld", LINUX_MIB_TCPDSACKIGNOREDOLD),
 	SNMP_MIB_ITEM("TCPDSACKIgnoredNoUndo", LINUX_MIB_TCPDSACKIGNOREDNOUNDO),
 	SNMP_MIB_ITEM("TCPSpuriousRTOs", LINUX_MIB_TCPSPURIOUSRTOS),
+	SNMP_MIB_ITEM("TCPMD5NotFound", LINUX_MIB_TCPMD5NOTFOUND),
+	SNMP_MIB_ITEM("TCPMD5Unexpected", LINUX_MIB_TCPMD5UNEXPECTED),
 	SNMP_MIB_SENTINEL
 };
 
diff --git a/net/ipv4/route.c b/net/ipv4/route.c
index e4ab0ac94f92..6ee5354c9aa1 100644
--- a/net/ipv4/route.c
+++ b/net/ipv4/route.c
@@ -1502,21 +1502,21 @@ unsigned short ip_rt_frag_needed(struct net *net, struct iphdr *iph,
 				    rth->fl.iif != 0 ||
 				    dst_metric_locked(&rth->u.dst, RTAX_MTU) ||
 				    !net_eq(dev_net(rth->u.dst.dev), net) ||
-				    !rt_is_expired(rth))
+				    rt_is_expired(rth))
 					continue;
 
 				if (new_mtu < 68 || new_mtu >= old_mtu) {
 
 					/* BSD 4.2 compatibility hack :-( */
 					if (mtu == 0 &&
-					    old_mtu >= dst_metric(&rth->u.dst, RTAX_MTU) &&
+					    old_mtu >= dst_mtu(&rth->u.dst) &&
 					    old_mtu >= 68 + (iph->ihl << 2))
 						old_mtu -= iph->ihl << 2;
 
 					mtu = guess_mtu(old_mtu);
 				}
-				if (mtu <= dst_metric(&rth->u.dst, RTAX_MTU)) {
-					if (mtu < dst_metric(&rth->u.dst, RTAX_MTU)) {
+				if (mtu <= dst_mtu(&rth->u.dst)) {
+					if (mtu < dst_mtu(&rth->u.dst)) {
 						dst_confirm(&rth->u.dst);
 						if (mtu < ip_rt_min_pmtu) {
 							mtu = ip_rt_min_pmtu;
@@ -1538,7 +1538,7 @@ unsigned short ip_rt_frag_needed(struct net *net, struct iphdr *iph,
 
 static void ip_rt_update_pmtu(struct dst_entry *dst, u32 mtu)
 {
-	if (dst_metric(dst, RTAX_MTU) > mtu && mtu >= 68 &&
+	if (dst_mtu(dst) > mtu && mtu >= 68 &&
 	    !(dst_metric_locked(dst, RTAX_MTU))) {
 		if (mtu < ip_rt_min_pmtu) {
 			mtu = ip_rt_min_pmtu;
@@ -1667,7 +1667,7 @@ static void rt_set_nexthop(struct rtable *rt, struct fib_result *res, u32 itag)
 
 	if (dst_metric(&rt->u.dst, RTAX_HOPLIMIT) == 0)
 		rt->u.dst.metrics[RTAX_HOPLIMIT-1] = sysctl_ip_default_ttl;
-	if (dst_metric(&rt->u.dst, RTAX_MTU) > IP_MAX_MTU)
+	if (dst_mtu(&rt->u.dst) > IP_MAX_MTU)
 		rt->u.dst.metrics[RTAX_MTU-1] = IP_MAX_MTU;
 	if (dst_metric(&rt->u.dst, RTAX_ADVMSS) == 0)
 		rt->u.dst.metrics[RTAX_ADVMSS-1] = max_t(unsigned int, rt->u.dst.dev->mtu - 40,
@@ -2914,7 +2914,69 @@ static int ipv4_sysctl_rtcache_flush_strategy(ctl_table *table,
 	return 0;
 }
 
-ctl_table ipv4_route_table[] = {
+static void rt_secret_reschedule(int old)
+{
+	struct net *net;
+	int new = ip_rt_secret_interval;
+	int diff = new - old;
+
+	if (!diff)
+		return;
+
+	rtnl_lock();
+	for_each_net(net) {
+		int deleted = del_timer_sync(&net->ipv4.rt_secret_timer);
+
+		if (!new)
+			continue;
+
+		if (deleted) {
+			long time = net->ipv4.rt_secret_timer.expires - jiffies;
+
+			if (time <= 0 || (time += diff) <= 0)
+				time = 0;
+
+			net->ipv4.rt_secret_timer.expires = time;
+		} else
+			net->ipv4.rt_secret_timer.expires = new;
+
+		net->ipv4.rt_secret_timer.expires += jiffies;
+		add_timer(&net->ipv4.rt_secret_timer);
+	}
+	rtnl_unlock();
+}
+
+static int ipv4_sysctl_rt_secret_interval(ctl_table *ctl, int write,
+					  struct file *filp,
+					  void __user *buffer, size_t *lenp,
+					  loff_t *ppos)
+{
+	int old = ip_rt_secret_interval;
+	int ret = proc_dointvec_jiffies(ctl, write, filp, buffer, lenp, ppos);
+
+	rt_secret_reschedule(old);
+
+	return ret;
+}
+
+static int ipv4_sysctl_rt_secret_interval_strategy(ctl_table *table,
+						   int __user *name,
+						   int nlen,
+						   void __user *oldval,
+						   size_t __user *oldlenp,
+						   void __user *newval,
+						   size_t newlen)
+{
+	int old = ip_rt_secret_interval;
+	int ret = sysctl_jiffies(table, name, nlen, oldval, oldlenp, newval,
+				 newlen);
+
+	rt_secret_reschedule(old);
+
+	return ret;
+}
+
+static ctl_table ipv4_route_table[] = {
 	{
 		.ctl_name	= NET_IPV4_ROUTE_GC_THRESH,
 		.procname	= "gc_thresh",
@@ -3048,20 +3110,29 @@ ctl_table ipv4_route_table[] = {
 		.data		= &ip_rt_secret_interval,
 		.maxlen		= sizeof(int),
 		.mode		= 0644,
-		.proc_handler	= &proc_dointvec_jiffies,
-		.strategy	= &sysctl_jiffies,
+		.proc_handler	= &ipv4_sysctl_rt_secret_interval,
+		.strategy	= &ipv4_sysctl_rt_secret_interval_strategy,
 	},
 	{ .ctl_name = 0 }
 };
 
-static __net_initdata struct ctl_path ipv4_route_path[] = {
+static struct ctl_table empty[1];
+
+static struct ctl_table ipv4_skeleton[] =
+{
+	{ .procname = "route", .ctl_name = NET_IPV4_ROUTE,
+	  .mode = 0555, .child = ipv4_route_table},
+	{ .procname = "neigh", .ctl_name = NET_IPV4_NEIGH,
+	  .mode = 0555, .child = empty},
+	{ }
+};
+
+static __net_initdata struct ctl_path ipv4_path[] = {
 	{ .procname = "net", .ctl_name = CTL_NET, },
 	{ .procname = "ipv4", .ctl_name = NET_IPV4, },
-	{ .procname = "route", .ctl_name = NET_IPV4_ROUTE, },
 	{ },
 };
 
-
 static struct ctl_table ipv4_route_flush_table[] = {
 	{
 		.ctl_name 	= NET_IPV4_ROUTE_FLUSH,
@@ -3074,6 +3145,13 @@ static struct ctl_table ipv4_route_flush_table[] = {
 	{ .ctl_name = 0 },
 };
 
+static __net_initdata struct ctl_path ipv4_route_path[] = {
+	{ .procname = "net", .ctl_name = CTL_NET, },
+	{ .procname = "ipv4", .ctl_name = NET_IPV4, },
+	{ .procname = "route", .ctl_name = NET_IPV4_ROUTE, },
+	{ },
+};
+
 static __net_init int sysctl_route_net_init(struct net *net)
 {
 	struct ctl_table *tbl;
@@ -3126,10 +3204,12 @@ static __net_init int rt_secret_timer_init(struct net *net)
 	net->ipv4.rt_secret_timer.data = (unsigned long)net;
 	init_timer_deferrable(&net->ipv4.rt_secret_timer);
 
-	net->ipv4.rt_secret_timer.expires =
-		jiffies + net_random() % ip_rt_secret_interval +
-		ip_rt_secret_interval;
-	add_timer(&net->ipv4.rt_secret_timer);
+	if (ip_rt_secret_interval) {
+		net->ipv4.rt_secret_timer.expires =
+			jiffies + net_random() % ip_rt_secret_interval +
+			ip_rt_secret_interval;
+		add_timer(&net->ipv4.rt_secret_timer);
+	}
 	return 0;
 }
 
@@ -3216,6 +3296,17 @@ int __init ip_rt_init(void)
 	return rc;
 }
 
+#ifdef CONFIG_SYSCTL
+/*
+ * We really need to sanitize the damn ipv4 init order, then all
+ * this nonsense will go away.
+ */
+void __init ip_static_sysctl_init(void)
+{
+	register_sysctl_paths(ipv4_path, ipv4_skeleton);
+}
+#endif
+
 EXPORT_SYMBOL(__ip_select_ident);
 EXPORT_SYMBOL(ip_route_input);
 EXPORT_SYMBOL(ip_route_output_key);
diff --git a/net/ipv4/syncookies.c b/net/ipv4/syncookies.c
index 51bc24d3b8a7..9d38005abbac 100644
--- a/net/ipv4/syncookies.c
+++ b/net/ipv4/syncookies.c
@@ -299,6 +299,7 @@ struct sock *cookie_v4_check(struct sock *sk, struct sk_buff *skb,
 	ireq->rmt_port		= th->source;
 	ireq->loc_addr		= ip_hdr(skb)->daddr;
 	ireq->rmt_addr		= ip_hdr(skb)->saddr;
+	ireq->ecn_ok		= 0;
 	ireq->snd_wscale	= tcp_opt.snd_wscale;
 	ireq->rcv_wscale	= tcp_opt.rcv_wscale;
 	ireq->sack_ok		= tcp_opt.sack_ok;
diff --git a/net/ipv4/sysctl_net_ipv4.c b/net/ipv4/sysctl_net_ipv4.c
index 14ef202a2254..e0689fd7b798 100644
--- a/net/ipv4/sysctl_net_ipv4.c
+++ b/net/ipv4/sysctl_net_ipv4.c
@@ -232,6 +232,7 @@ static struct ctl_table ipv4_table[] = {
 		.mode		= 0644,
 		.proc_handler	= &ipv4_doint_and_flush,
 		.strategy	= &ipv4_doint_and_flush_strategy,
+		.extra2		= &init_net,
 	},
 	{
 		.ctl_name	= NET_IPV4_NO_PMTU_DISC,
@@ -401,13 +402,6 @@ static struct ctl_table ipv4_table[] = {
 		.proc_handler	= &ipv4_local_port_range,
 		.strategy	= &ipv4_sysctl_local_port_range,
 	},
-	{
-		.ctl_name	= NET_IPV4_ROUTE,
-		.procname	= "route",
-		.maxlen		= 0,
-		.mode		= 0555,
-		.child		= ipv4_route_table
-	},
 #ifdef CONFIG_IP_MULTICAST
 	{
 		.ctl_name	= NET_IPV4_IGMP_MAX_MEMBERSHIPS,
diff --git a/net/ipv4/tcp.c b/net/ipv4/tcp.c
index 0b491bf03db4..1ab341e5d3e0 100644
--- a/net/ipv4/tcp.c
+++ b/net/ipv4/tcp.c
@@ -1096,7 +1096,7 @@ void tcp_cleanup_rbuf(struct sock *sk, int copied)
 #if TCP_DEBUG
 	struct sk_buff *skb = skb_peek(&sk->sk_receive_queue);
 
-	BUG_TRAP(!skb || before(tp->copied_seq, TCP_SKB_CB(skb)->end_seq));
+	WARN_ON(skb && !before(tp->copied_seq, TCP_SKB_CB(skb)->end_seq));
 #endif
 
 	if (inet_csk_ack_scheduled(sk)) {
@@ -1358,7 +1358,7 @@ int tcp_recvmsg(struct kiocb *iocb, struct sock *sk, struct msghdr *msg,
 				goto found_ok_skb;
 			if (tcp_hdr(skb)->fin)
 				goto found_fin_ok;
-			BUG_TRAP(flags & MSG_PEEK);
+			WARN_ON(!(flags & MSG_PEEK));
 			skb = skb->next;
 		} while (skb != (struct sk_buff *)&sk->sk_receive_queue);
 
@@ -1421,8 +1421,8 @@ int tcp_recvmsg(struct kiocb *iocb, struct sock *sk, struct msghdr *msg,
 
 			tp->ucopy.len = len;
 
-			BUG_TRAP(tp->copied_seq == tp->rcv_nxt ||
-				 (flags & (MSG_PEEK | MSG_TRUNC)));
+			WARN_ON(tp->copied_seq != tp->rcv_nxt &&
+				!(flags & (MSG_PEEK | MSG_TRUNC)));
 
 			/* Ugly... If prequeue is not empty, we have to
 			 * process it before releasing socket, otherwise
@@ -1844,7 +1844,7 @@ adjudge_to_death:
 	 */
 	local_bh_disable();
 	bh_lock_sock(sk);
-	BUG_TRAP(!sock_owned_by_user(sk));
+	WARN_ON(sock_owned_by_user(sk));
 
 	/* Have we already been destroyed by a softirq or backlog? */
 	if (state != TCP_CLOSE && sk->sk_state == TCP_CLOSE)
@@ -1973,7 +1973,7 @@ int tcp_disconnect(struct sock *sk, int flags)
 	memset(&tp->rx_opt, 0, sizeof(tp->rx_opt));
 	__sk_dst_reset(sk);
 
-	BUG_TRAP(!inet->num || icsk->icsk_bind_hash);
+	WARN_ON(inet->num && !icsk->icsk_bind_hash);
 
 	sk->sk_error_report(sk);
 	return err;
diff --git a/net/ipv4/tcp_input.c b/net/ipv4/tcp_input.c
index 75efd244f2af..67ccce2a96bd 100644
--- a/net/ipv4/tcp_input.c
+++ b/net/ipv4/tcp_input.c
@@ -1629,10 +1629,10 @@ advance_sp:
 out:
 
 #if FASTRETRANS_DEBUG > 0
-	BUG_TRAP((int)tp->sacked_out >= 0);
-	BUG_TRAP((int)tp->lost_out >= 0);
-	BUG_TRAP((int)tp->retrans_out >= 0);
-	BUG_TRAP((int)tcp_packets_in_flight(tp) >= 0);
+	WARN_ON((int)tp->sacked_out < 0);
+	WARN_ON((int)tp->lost_out < 0);
+	WARN_ON((int)tp->retrans_out < 0);
+	WARN_ON((int)tcp_packets_in_flight(tp) < 0);
 #endif
 	return flag;
 }
@@ -2181,7 +2181,7 @@ static void tcp_mark_head_lost(struct sock *sk, int packets)
 	int err;
 	unsigned int mss;
 
-	BUG_TRAP(packets <= tp->packets_out);
+	WARN_ON(packets > tp->packets_out);
 	if (tp->lost_skb_hint) {
 		skb = tp->lost_skb_hint;
 		cnt = tp->lost_cnt_hint;
@@ -2610,7 +2610,7 @@ static void tcp_fastretrans_alert(struct sock *sk, int pkts_acked, int flag)
 	/* E. Check state exit conditions. State can be terminated
 	 *    when high_seq is ACKed. */
 	if (icsk->icsk_ca_state == TCP_CA_Open) {
-		BUG_TRAP(tp->retrans_out == 0);
+		WARN_ON(tp->retrans_out != 0);
 		tp->retrans_stamp = 0;
 	} else if (!before(tp->snd_una, tp->high_seq)) {
 		switch (icsk->icsk_ca_state) {
@@ -2972,9 +2972,9 @@ static int tcp_clean_rtx_queue(struct sock *sk, int prior_fackets)
 	}
 
 #if FASTRETRANS_DEBUG > 0
-	BUG_TRAP((int)tp->sacked_out >= 0);
-	BUG_TRAP((int)tp->lost_out >= 0);
-	BUG_TRAP((int)tp->retrans_out >= 0);
+	WARN_ON((int)tp->sacked_out < 0);
+	WARN_ON((int)tp->lost_out < 0);
+	WARN_ON((int)tp->retrans_out < 0);
 	if (!tp->packets_out && tcp_is_sack(tp)) {
 		icsk = inet_csk(sk);
 		if (tp->lost_out) {
@@ -3877,7 +3877,7 @@ static void tcp_sack_remove(struct tcp_sock *tp)
 			int i;
 
 			/* RCV.NXT must cover all the block! */
-			BUG_TRAP(!before(tp->rcv_nxt, sp->end_seq));
+			WARN_ON(before(tp->rcv_nxt, sp->end_seq));
 
 			/* Zap this SACK, by moving forward any other SACKS. */
 			for (i=this_sack+1; i < num_sacks; i++)
diff --git a/net/ipv4/tcp_ipv4.c b/net/ipv4/tcp_ipv4.c
index a82df6307567..44c1e934824b 100644
--- a/net/ipv4/tcp_ipv4.c
+++ b/net/ipv4/tcp_ipv4.c
@@ -418,7 +418,7 @@ void tcp_v4_err(struct sk_buff *skb, u32 info)
 		/* ICMPs are not backlogged, hence we cannot get
 		   an established socket here.
 		 */
-		BUG_TRAP(!req->sk);
+		WARN_ON(req->sk);
 
 		if (seq != tcp_rsk(req)->snt_isn) {
 			NET_INC_STATS_BH(net, LINUX_MIB_OUTOFWINDOWICMPS);
@@ -655,8 +655,8 @@ static void tcp_v4_send_ack(struct sk_buff *skb, u32 seq, u32 ack,
 		rep.th.doff = arg.iov[0].iov_len/4;
 
 		tcp_v4_md5_hash_hdr((__u8 *) &rep.opt[offset],
-				    key, ip_hdr(skb)->daddr,
-				    ip_hdr(skb)->saddr, &rep.th);
+				    key, ip_hdr(skb)->saddr,
+				    ip_hdr(skb)->daddr, &rep.th);
 	}
 #endif
 	arg.csum = csum_tcpudp_nofold(ip_hdr(skb)->daddr,
@@ -687,14 +687,14 @@ static void tcp_v4_timewait_ack(struct sock *sk, struct sk_buff *skb)
 	inet_twsk_put(tw);
 }
 
-static void tcp_v4_reqsk_send_ack(struct sk_buff *skb,
+static void tcp_v4_reqsk_send_ack(struct sock *sk, struct sk_buff *skb,
 				  struct request_sock *req)
 {
 	tcp_v4_send_ack(skb, tcp_rsk(req)->snt_isn + 1,
 			tcp_rsk(req)->rcv_isn + 1, req->rcv_wnd,
 			req->ts_recent,
 			0,
-			tcp_v4_md5_do_lookup(skb->sk, ip_hdr(skb)->daddr));
+			tcp_v4_md5_do_lookup(sk, ip_hdr(skb)->daddr));
 }
 
 /*
@@ -1116,18 +1116,12 @@ static int tcp_v4_inbound_md5_hash(struct sock *sk, struct sk_buff *skb)
 		return 0;
 
 	if (hash_expected && !hash_location) {
-		LIMIT_NETDEBUG(KERN_INFO "MD5 Hash expected but NOT found "
-			       "(" NIPQUAD_FMT ", %d)->(" NIPQUAD_FMT ", %d)\n",
-			       NIPQUAD(iph->saddr), ntohs(th->source),
-			       NIPQUAD(iph->daddr), ntohs(th->dest));
+		NET_INC_STATS_BH(sock_net(sk), LINUX_MIB_TCPMD5NOTFOUND);
 		return 1;
 	}
 
 	if (!hash_expected && hash_location) {
-		LIMIT_NETDEBUG(KERN_INFO "MD5 Hash NOT expected but found "
-			       "(" NIPQUAD_FMT ", %d)->(" NIPQUAD_FMT ", %d)\n",
-			       NIPQUAD(iph->saddr), ntohs(th->source),
-			       NIPQUAD(iph->daddr), ntohs(th->dest));
+		NET_INC_STATS_BH(sock_net(sk), LINUX_MIB_TCPMD5UNEXPECTED);
 		return 1;
 	}
 
diff --git a/net/ipv4/tcp_minisocks.c b/net/ipv4/tcp_minisocks.c
index 204c42162660..f976fc57892c 100644
--- a/net/ipv4/tcp_minisocks.c
+++ b/net/ipv4/tcp_minisocks.c
@@ -609,7 +609,7 @@ struct sock *tcp_check_req(struct sock *sk,struct sk_buff *skb,
 					  tcp_rsk(req)->rcv_isn + 1, tcp_rsk(req)->rcv_isn + 1 + req->rcv_wnd)) {
 		/* Out of window: send ACK and drop. */
 		if (!(flg & TCP_FLAG_RST))
-			req->rsk_ops->send_ack(skb, req);
+			req->rsk_ops->send_ack(sk, skb, req);
 		if (paws_reject)
 			NET_INC_STATS_BH(sock_net(sk), LINUX_MIB_PAWSESTABREJECTED);
 		return NULL;
@@ -618,89 +618,87 @@ struct sock *tcp_check_req(struct sock *sk,struct sk_buff *skb,
 	/* In sequence, PAWS is OK. */
 
 	if (tmp_opt.saw_tstamp && !after(TCP_SKB_CB(skb)->seq, tcp_rsk(req)->rcv_isn + 1))
-			req->ts_recent = tmp_opt.rcv_tsval;
+		req->ts_recent = tmp_opt.rcv_tsval;
 
-		if (TCP_SKB_CB(skb)->seq == tcp_rsk(req)->rcv_isn) {
-			/* Truncate SYN, it is out of window starting
-			   at tcp_rsk(req)->rcv_isn + 1. */
-			flg &= ~TCP_FLAG_SYN;
-		}
+	if (TCP_SKB_CB(skb)->seq == tcp_rsk(req)->rcv_isn) {
+		/* Truncate SYN, it is out of window starting
+		   at tcp_rsk(req)->rcv_isn + 1. */
+		flg &= ~TCP_FLAG_SYN;
+	}
 
-		/* RFC793: "second check the RST bit" and
-		 *	   "fourth, check the SYN bit"
-		 */
-		if (flg & (TCP_FLAG_RST|TCP_FLAG_SYN)) {
-			TCP_INC_STATS_BH(sock_net(sk), TCP_MIB_ATTEMPTFAILS);
-			goto embryonic_reset;
-		}
+	/* RFC793: "second check the RST bit" and
+	 *	   "fourth, check the SYN bit"
+	 */
+	if (flg & (TCP_FLAG_RST|TCP_FLAG_SYN)) {
+		TCP_INC_STATS_BH(sock_net(sk), TCP_MIB_ATTEMPTFAILS);
+		goto embryonic_reset;
+	}
 
-		/* ACK sequence verified above, just make sure ACK is
-		 * set.  If ACK not set, just silently drop the packet.
-		 */
-		if (!(flg & TCP_FLAG_ACK))
-			return NULL;
-
-		/* If TCP_DEFER_ACCEPT is set, drop bare ACK. */
-		if (inet_csk(sk)->icsk_accept_queue.rskq_defer_accept &&
-		    TCP_SKB_CB(skb)->end_seq == tcp_rsk(req)->rcv_isn + 1) {
-			inet_rsk(req)->acked = 1;
-			return NULL;
-		}
+	/* ACK sequence verified above, just make sure ACK is
+	 * set.  If ACK not set, just silently drop the packet.
+	 */
+	if (!(flg & TCP_FLAG_ACK))
+		return NULL;
 
-		/* OK, ACK is valid, create big socket and
-		 * feed this segment to it. It will repeat all
-		 * the tests. THIS SEGMENT MUST MOVE SOCKET TO
-		 * ESTABLISHED STATE. If it will be dropped after
-		 * socket is created, wait for troubles.
-		 */
-		child = inet_csk(sk)->icsk_af_ops->syn_recv_sock(sk, skb,
-								 req, NULL);
-		if (child == NULL)
-			goto listen_overflow;
+	/* If TCP_DEFER_ACCEPT is set, drop bare ACK. */
+	if (inet_csk(sk)->icsk_accept_queue.rskq_defer_accept &&
+	    TCP_SKB_CB(skb)->end_seq == tcp_rsk(req)->rcv_isn + 1) {
+		inet_rsk(req)->acked = 1;
+		return NULL;
+	}
+
+	/* OK, ACK is valid, create big socket and
+	 * feed this segment to it. It will repeat all
+	 * the tests. THIS SEGMENT MUST MOVE SOCKET TO
+	 * ESTABLISHED STATE. If it will be dropped after
+	 * socket is created, wait for troubles.
+	 */
+	child = inet_csk(sk)->icsk_af_ops->syn_recv_sock(sk, skb, req, NULL);
+	if (child == NULL)
+		goto listen_overflow;
 #ifdef CONFIG_TCP_MD5SIG
-		else {
-			/* Copy over the MD5 key from the original socket */
-			struct tcp_md5sig_key *key;
-			struct tcp_sock *tp = tcp_sk(sk);
-			key = tp->af_specific->md5_lookup(sk, child);
-			if (key != NULL) {
-				/*
-				 * We're using one, so create a matching key on the
-				 * newsk structure. If we fail to get memory then we
-				 * end up not copying the key across. Shucks.
-				 */
-				char *newkey = kmemdup(key->key, key->keylen,
-						       GFP_ATOMIC);
-				if (newkey) {
-					if (!tcp_alloc_md5sig_pool())
-						BUG();
-					tp->af_specific->md5_add(child, child,
-								 newkey,
-								 key->keylen);
-				}
+	else {
+		/* Copy over the MD5 key from the original socket */
+		struct tcp_md5sig_key *key;
+		struct tcp_sock *tp = tcp_sk(sk);
+		key = tp->af_specific->md5_lookup(sk, child);
+		if (key != NULL) {
+			/*
+			 * We're using one, so create a matching key on the
+			 * newsk structure. If we fail to get memory then we
+			 * end up not copying the key across. Shucks.
+			 */
+			char *newkey = kmemdup(key->key, key->keylen,
+					       GFP_ATOMIC);
+			if (newkey) {
+				if (!tcp_alloc_md5sig_pool())
+					BUG();
+				tp->af_specific->md5_add(child, child, newkey,
+							 key->keylen);
 			}
 		}
+	}
 #endif
 
-		inet_csk_reqsk_queue_unlink(sk, req, prev);
-		inet_csk_reqsk_queue_removed(sk, req);
+	inet_csk_reqsk_queue_unlink(sk, req, prev);
+	inet_csk_reqsk_queue_removed(sk, req);
 
-		inet_csk_reqsk_queue_add(sk, req, child);
-		return child;
+	inet_csk_reqsk_queue_add(sk, req, child);
+	return child;
 
-	listen_overflow:
-		if (!sysctl_tcp_abort_on_overflow) {
-			inet_rsk(req)->acked = 1;
-			return NULL;
-		}
+listen_overflow:
+	if (!sysctl_tcp_abort_on_overflow) {
+		inet_rsk(req)->acked = 1;
+		return NULL;
+	}
 
-	embryonic_reset:
-		NET_INC_STATS_BH(sock_net(sk), LINUX_MIB_EMBRYONICRSTS);
-		if (!(flg & TCP_FLAG_RST))
-			req->rsk_ops->send_reset(sk, skb);
+embryonic_reset:
+	NET_INC_STATS_BH(sock_net(sk), LINUX_MIB_EMBRYONICRSTS);
+	if (!(flg & TCP_FLAG_RST))
+		req->rsk_ops->send_reset(sk, skb);
 
-		inet_csk_reqsk_queue_drop(sk, req, prev);
-		return NULL;
+	inet_csk_reqsk_queue_drop(sk, req, prev);
+	return NULL;
 }
 
 /*
diff --git a/net/ipv4/tcp_output.c b/net/ipv4/tcp_output.c
index a00532de2a8c..8165f5aa8c71 100644
--- a/net/ipv4/tcp_output.c
+++ b/net/ipv4/tcp_output.c
@@ -468,7 +468,8 @@ static unsigned tcp_syn_options(struct sock *sk, struct sk_buff *skb,
 	}
 	if (likely(sysctl_tcp_window_scaling)) {
 		opts->ws = tp->rx_opt.rcv_wscale;
-		size += TCPOLEN_WSCALE_ALIGNED;
+		if(likely(opts->ws))
+			size += TCPOLEN_WSCALE_ALIGNED;
 	}
 	if (likely(sysctl_tcp_sack)) {
 		opts->options |= OPTION_SACK_ADVERTISE;
@@ -509,7 +510,8 @@ static unsigned tcp_synack_options(struct sock *sk,
 
 	if (likely(ireq->wscale_ok)) {
 		opts->ws = ireq->rcv_wscale;
-		size += TCPOLEN_WSCALE_ALIGNED;
+		if(likely(opts->ws))
+			size += TCPOLEN_WSCALE_ALIGNED;
 	}
 	if (likely(doing_ts)) {
 		opts->options |= OPTION_TS;
diff --git a/net/ipv4/tcp_timer.c b/net/ipv4/tcp_timer.c
index 328e0cf42b3c..5ab6ba19c3ce 100644
--- a/net/ipv4/tcp_timer.c
+++ b/net/ipv4/tcp_timer.c
@@ -287,7 +287,7 @@ static void tcp_retransmit_timer(struct sock *sk)
 	if (!tp->packets_out)
 		goto out;
 
-	BUG_TRAP(!tcp_write_queue_empty(sk));
+	WARN_ON(tcp_write_queue_empty(sk));
 
 	if (!tp->snd_wnd && !sock_flag(sk, SOCK_DEAD) &&
 	    !((1 << sk->sk_state) & (TCPF_SYN_SENT | TCPF_SYN_RECV))) {
diff --git a/net/ipv4/udp.c b/net/ipv4/udp.c
index 383d17359d01..8e42fbbd5761 100644
--- a/net/ipv4/udp.c
+++ b/net/ipv4/udp.c
@@ -989,7 +989,9 @@ int udp_queue_rcv_skb(struct sock * sk, struct sk_buff *skb)
 		    up->encap_rcv != NULL) {
 			int ret;
 
+			bh_unlock_sock(sk);
 			ret = (*up->encap_rcv)(sk, skb);
+			bh_lock_sock(sk);
 			if (ret <= 0) {
 				UDP_INC_STATS_BH(sock_net(sk),
 						 UDP_MIB_INDATAGRAMS,
@@ -1092,7 +1094,7 @@ static int __udp4_lib_mcast_deliver(struct net *net, struct sk_buff *skb,
 			if (skb1) {
 				int ret = 0;
 
-				bh_lock_sock_nested(sk);
+				bh_lock_sock(sk);
 				if (!sock_owned_by_user(sk))
 					ret = udp_queue_rcv_skb(sk, skb1);
 				else
@@ -1194,7 +1196,7 @@ int __udp4_lib_rcv(struct sk_buff *skb, struct hlist_head udptable[],
 
 	if (sk != NULL) {
 		int ret = 0;
-		bh_lock_sock_nested(sk);
+		bh_lock_sock(sk);
 		if (!sock_owned_by_user(sk))
 			ret = udp_queue_rcv_skb(sk, skb);
 		else
diff --git a/net/ipv4/xfrm4_mode_beet.c b/net/ipv4/xfrm4_mode_beet.c
index 9c798abce736..63418185f524 100644
--- a/net/ipv4/xfrm4_mode_beet.c
+++ b/net/ipv4/xfrm4_mode_beet.c
@@ -47,8 +47,10 @@ static int xfrm4_beet_output(struct xfrm_state *x, struct sk_buff *skb)
 	if (unlikely(optlen))
 		hdrlen += IPV4_BEET_PHMAXLEN - (optlen & 4);
 
-	skb_set_network_header(skb, IPV4_BEET_PHMAXLEN - x->props.header_len -
-				    hdrlen);
+	skb_set_network_header(skb, -x->props.header_len -
+			            hdrlen + (XFRM_MODE_SKB_CB(skb)->ihl - sizeof(*top_iph)));
+	if (x->sel.family != AF_INET6)
+		skb->network_header += IPV4_BEET_PHMAXLEN;
 	skb->mac_header = skb->network_header +
 			  offsetof(struct iphdr, protocol);
 	skb->transport_header = skb->network_header + sizeof(*top_iph);
diff --git a/net/ipv6/Kconfig b/net/ipv6/Kconfig
index 42814a2ec9d7..ec992159b5f8 100644
--- a/net/ipv6/Kconfig
+++ b/net/ipv6/Kconfig
@@ -96,10 +96,8 @@ config INET6_ESP
 
 config INET6_IPCOMP
 	tristate "IPv6: IPComp transformation"
-	select XFRM
 	select INET6_XFRM_TUNNEL
-	select CRYPTO
-	select CRYPTO_DEFLATE
+	select XFRM_IPCOMP
 	---help---
 	  Support for IP Payload Compression Protocol (IPComp) (RFC3173),
 	  typically needed for IPsec.
diff --git a/net/ipv6/addrconf.c b/net/ipv6/addrconf.c
index 74d543d504a1..7b6a584b62dd 100644
--- a/net/ipv6/addrconf.c
+++ b/net/ipv6/addrconf.c
@@ -313,8 +313,10 @@ static void in6_dev_finish_destroy_rcu(struct rcu_head *head)
 void in6_dev_finish_destroy(struct inet6_dev *idev)
 {
 	struct net_device *dev = idev->dev;
-	BUG_TRAP(idev->addr_list==NULL);
-	BUG_TRAP(idev->mc_list==NULL);
+
+	WARN_ON(idev->addr_list != NULL);
+	WARN_ON(idev->mc_list != NULL);
+
 #ifdef NET_REFCNT_DEBUG
 	printk(KERN_DEBUG "in6_dev_finish_destroy: %s\n", dev ? dev->name : "NIL");
 #endif
@@ -517,8 +519,9 @@ static void addrconf_fixup_forwarding(struct ctl_table *table, int *p, int old)
 
 void inet6_ifa_finish_destroy(struct inet6_ifaddr *ifp)
 {
-	BUG_TRAP(ifp->if_next==NULL);
-	BUG_TRAP(ifp->lst_next==NULL);
+	WARN_ON(ifp->if_next != NULL);
+	WARN_ON(ifp->lst_next != NULL);
+
 #ifdef NET_REFCNT_DEBUG
 	printk(KERN_DEBUG "inet6_ifa_finish_destroy\n");
 #endif
@@ -1103,13 +1106,12 @@ out:
 	return ret;
 }
 
-int ipv6_dev_get_saddr(struct net_device *dst_dev,
+int ipv6_dev_get_saddr(struct net *net, struct net_device *dst_dev,
 		       const struct in6_addr *daddr, unsigned int prefs,
 		       struct in6_addr *saddr)
 {
 	struct ipv6_saddr_score scores[2],
 				*score = &scores[0], *hiscore = &scores[1];
-	struct net *net = dev_net(dst_dev);
 	struct ipv6_saddr_dst dst;
 	struct net_device *dev;
 	int dst_type;
@@ -1686,6 +1688,7 @@ addrconf_prefix_route(struct in6_addr *pfx, int plen, struct net_device *dev,
 		.fc_dst_len = plen,
 		.fc_flags = RTF_UP | flags,
 		.fc_nlinfo.nl_net = dev_net(dev),
+		.fc_protocol = RTPROT_KERNEL,
 	};
 
 	ipv6_addr_copy(&cfg.fc_dst, pfx);
diff --git a/net/ipv6/af_inet6.c b/net/ipv6/af_inet6.c
index 3d828bc4b1cf..95055f8c3f35 100644
--- a/net/ipv6/af_inet6.c
+++ b/net/ipv6/af_inet6.c
@@ -83,7 +83,6 @@ static int inet6_create(struct net *net, struct socket *sock, int protocol)
 	struct inet_sock *inet;
 	struct ipv6_pinfo *np;
 	struct sock *sk;
-	struct list_head *p;
 	struct inet_protosw *answer;
 	struct proto *answer_prot;
 	unsigned char answer_flags;
@@ -97,13 +96,12 @@ static int inet6_create(struct net *net, struct socket *sock, int protocol)
 		build_ehash_secret();
 
 	/* Look for the requested type/protocol pair. */
-	answer = NULL;
 lookup_protocol:
 	err = -ESOCKTNOSUPPORT;
 	rcu_read_lock();
-	list_for_each_rcu(p, &inetsw6[sock->type]) {
-		answer = list_entry(p, struct inet_protosw, list);
+	list_for_each_entry_rcu(answer, &inetsw6[sock->type], list) {
 
+		err = 0;
 		/* Check the non-wild match. */
 		if (protocol == answer->protocol) {
 			if (protocol != IPPROTO_IP)
@@ -118,10 +116,9 @@ lookup_protocol:
 				break;
 		}
 		err = -EPROTONOSUPPORT;
-		answer = NULL;
 	}
 
-	if (!answer) {
+	if (err) {
 		if (try_loading_module < 2) {
 			rcu_read_unlock();
 			/*
@@ -153,7 +150,7 @@ lookup_protocol:
 	answer_flags = answer->flags;
 	rcu_read_unlock();
 
-	BUG_TRAP(answer_prot->slab != NULL);
+	WARN_ON(answer_prot->slab == NULL);
 
 	err = -ENOBUFS;
 	sk = sk_alloc(net, PF_INET6, GFP_KERNEL, answer_prot);
@@ -937,6 +934,11 @@ static int __init inet6_init(void)
 	if (err)
 		goto out_unregister_sock;
 
+#ifdef CONFIG_SYSCTL
+	err = ipv6_static_sysctl_register();
+	if (err)
+		goto static_sysctl_fail;
+#endif
 	/*
 	 *	ipngwg API draft makes clear that the correct semantics
 	 *	for TCP and UDP is to consider one TCP and UDP instance
@@ -1061,6 +1063,10 @@ ipmr_fail:
 icmp_fail:
 	unregister_pernet_subsys(&inet6_net_ops);
 register_pernet_fail:
+#ifdef CONFIG_SYSCTL
+	ipv6_static_sysctl_unregister();
+static_sysctl_fail:
+#endif
 	cleanup_ipv6_mibs();
 out_unregister_sock:
 	sock_unregister(PF_INET6);
@@ -1116,6 +1122,9 @@ static void __exit inet6_exit(void)
 	rawv6_exit();
 
 	unregister_pernet_subsys(&inet6_net_ops);
+#ifdef CONFIG_SYSCTL
+	ipv6_static_sysctl_unregister();
+#endif
 	cleanup_ipv6_mibs();
 	proto_unregister(&rawv6_prot);
 	proto_unregister(&udplitev6_prot);
diff --git a/net/ipv6/datagram.c b/net/ipv6/datagram.c
index f7b535dec860..410046a8cc91 100644
--- a/net/ipv6/datagram.c
+++ b/net/ipv6/datagram.c
@@ -732,7 +732,7 @@ int datagram_send_ctl(struct net *net,
 			LIMIT_NETDEBUG(KERN_DEBUG "invalid cmsg type: %d\n",
 				       cmsg->cmsg_type);
 			err = -EINVAL;
-			break;
+			goto exit_f;
 		}
 	}
 
diff --git a/net/ipv6/esp6.c b/net/ipv6/esp6.c
index c6bb4c6d24b3..b181b08fb761 100644
--- a/net/ipv6/esp6.c
+++ b/net/ipv6/esp6.c
@@ -521,6 +521,10 @@ static int esp6_init_state(struct xfrm_state *x)
 			      crypto_aead_ivsize(aead);
 	switch (x->props.mode) {
 	case XFRM_MODE_BEET:
+		if (x->sel.family != AF_INET6)
+			x->props.header_len += IPV4_BEET_PHMAXLEN +
+				               (sizeof(struct ipv6hdr) - sizeof(struct iphdr));
+		break;
 	case XFRM_MODE_TRANSPORT:
 		break;
 	case XFRM_MODE_TUNNEL:
diff --git a/net/ipv6/fib6_rules.c b/net/ipv6/fib6_rules.c
index 8d05527524e3..f5de3f9dc692 100644
--- a/net/ipv6/fib6_rules.c
+++ b/net/ipv6/fib6_rules.c
@@ -93,7 +93,8 @@ static int fib6_rule_action(struct fib_rule *rule, struct flowi *flp,
 			if (flags & RT6_LOOKUP_F_SRCPREF_COA)
 				srcprefs |= IPV6_PREFER_SRC_COA;
 
-			if (ipv6_dev_get_saddr(ip6_dst_idev(&rt->u.dst)->dev,
+			if (ipv6_dev_get_saddr(net,
+					       ip6_dst_idev(&rt->u.dst)->dev,
 					       &flp->fl6_dst, srcprefs,
 					       &saddr))
 				goto again;
diff --git a/net/ipv6/icmp.c b/net/ipv6/icmp.c
index abedf95fdf2d..b3157a0cc15d 100644
--- a/net/ipv6/icmp.c
+++ b/net/ipv6/icmp.c
@@ -91,19 +91,22 @@ static struct inet6_protocol icmpv6_protocol = {
 	.flags		=	INET6_PROTO_NOPOLICY|INET6_PROTO_FINAL,
 };
 
-static __inline__ int icmpv6_xmit_lock(struct sock *sk)
+static __inline__ struct sock *icmpv6_xmit_lock(struct net *net)
 {
+	struct sock *sk;
+
 	local_bh_disable();
 
+	sk = icmpv6_sk(net);
 	if (unlikely(!spin_trylock(&sk->sk_lock.slock))) {
 		/* This can happen if the output path (f.e. SIT or
 		 * ip6ip6 tunnel) signals dst_link_failure() for an
 		 * outgoing ICMP6 packet.
 		 */
 		local_bh_enable();
-		return 1;
+		return NULL;
 	}
-	return 0;
+	return sk;
 }
 
 static __inline__ void icmpv6_xmit_unlock(struct sock *sk)
@@ -392,11 +395,10 @@ void icmpv6_send(struct sk_buff *skb, int type, int code, __u32 info,
 	fl.fl_icmp_code = code;
 	security_skb_classify_flow(skb, &fl);
 
-	sk = icmpv6_sk(net);
-	np = inet6_sk(sk);
-
-	if (icmpv6_xmit_lock(sk))
+	sk = icmpv6_xmit_lock(net);
+	if (sk == NULL)
 		return;
+	np = inet6_sk(sk);
 
 	if (!icmpv6_xrlim_allow(sk, type, &fl))
 		goto out;
@@ -539,11 +541,10 @@ static void icmpv6_echo_reply(struct sk_buff *skb)
 	fl.fl_icmp_type = ICMPV6_ECHO_REPLY;
 	security_skb_classify_flow(skb, &fl);
 
-	sk = icmpv6_sk(net);
-	np = inet6_sk(sk);
-
-	if (icmpv6_xmit_lock(sk))
+	sk = icmpv6_xmit_lock(net);
+	if (sk == NULL)
 		return;
+	np = inet6_sk(sk);
 
 	if (!fl.oif && ipv6_addr_is_multicast(&fl.fl6_dst))
 		fl.oif = np->mcast_oif;
diff --git a/net/ipv6/inet6_connection_sock.c b/net/ipv6/inet6_connection_sock.c
index 87801cc1b2f8..16d43f20b32f 100644
--- a/net/ipv6/inet6_connection_sock.c
+++ b/net/ipv6/inet6_connection_sock.c
@@ -98,7 +98,7 @@ struct request_sock *inet6_csk_search_req(const struct sock *sk,
 		    ipv6_addr_equal(&treq->rmt_addr, raddr) &&
 		    ipv6_addr_equal(&treq->loc_addr, laddr) &&
 		    (!treq->iif || treq->iif == iif)) {
-			BUG_TRAP(req->sk == NULL);
+			WARN_ON(req->sk != NULL);
 			*prevp = prev;
 			return req;
 		}
diff --git a/net/ipv6/inet6_hashtables.c b/net/ipv6/inet6_hashtables.c
index 00a8a5f9380c..1646a5658255 100644
--- a/net/ipv6/inet6_hashtables.c
+++ b/net/ipv6/inet6_hashtables.c
@@ -28,7 +28,7 @@ void __inet6_hash(struct sock *sk)
 	struct hlist_head *list;
 	rwlock_t *lock;
 
-	BUG_TRAP(sk_unhashed(sk));
+	WARN_ON(!sk_unhashed(sk));
 
 	if (sk->sk_state == TCP_LISTEN) {
 		list = &hashinfo->listening_hash[inet_sk_listen_hashfn(sk)];
@@ -202,7 +202,7 @@ unique:
 	 * in hash table socket with a funny identity. */
 	inet->num = lport;
 	inet->sport = htons(lport);
-	BUG_TRAP(sk_unhashed(sk));
+	WARN_ON(!sk_unhashed(sk));
 	__sk_add_node(sk, &head->chain);
 	sk->sk_hash = hash;
 	sock_prot_inuse_add(sock_net(sk), sk->sk_prot, 1);
diff --git a/net/ipv6/ip6_fib.c b/net/ipv6/ip6_fib.c
index 08ea2de28d63..29c7c99e69f7 100644
--- a/net/ipv6/ip6_fib.c
+++ b/net/ipv6/ip6_fib.c
@@ -287,7 +287,7 @@ static int fib6_dump_node(struct fib6_walker_t *w)
 			w->leaf = rt;
 			return 1;
 		}
-		BUG_TRAP(res!=0);
+		WARN_ON(res == 0);
 	}
 	w->leaf = NULL;
 	return 0;
@@ -378,6 +378,7 @@ static int inet6_dump_fib(struct sk_buff *skb, struct netlink_callback *cb)
 
 	arg.skb = skb;
 	arg.cb = cb;
+	arg.net = net;
 	w->args = &arg;
 
 	for (h = s_h; h < FIB_TABLE_HASHSZ; h++, s_e = 0) {
@@ -778,7 +779,7 @@ out:
 			pn->leaf = fib6_find_prefix(info->nl_net, pn);
 #if RT6_DEBUG >= 2
 			if (!pn->leaf) {
-				BUG_TRAP(pn->leaf != NULL);
+				WARN_ON(pn->leaf == NULL);
 				pn->leaf = info->nl_net->ipv6.ip6_null_entry;
 			}
 #endif
@@ -942,7 +943,7 @@ struct fib6_node * fib6_locate(struct fib6_node *root,
 
 #ifdef CONFIG_IPV6_SUBTREES
 	if (src_len) {
-		BUG_TRAP(saddr!=NULL);
+		WARN_ON(saddr == NULL);
 		if (fn && fn->subtree)
 			fn = fib6_locate_1(fn->subtree, saddr, src_len,
 					   offsetof(struct rt6_info, rt6i_src));
@@ -996,9 +997,9 @@ static struct fib6_node *fib6_repair_tree(struct net *net,
 		RT6_TRACE("fixing tree: plen=%d iter=%d\n", fn->fn_bit, iter);
 		iter++;
 
-		BUG_TRAP(!(fn->fn_flags&RTN_RTINFO));
-		BUG_TRAP(!(fn->fn_flags&RTN_TL_ROOT));
-		BUG_TRAP(fn->leaf==NULL);
+		WARN_ON(fn->fn_flags & RTN_RTINFO);
+		WARN_ON(fn->fn_flags & RTN_TL_ROOT);
+		WARN_ON(fn->leaf != NULL);
 
 		children = 0;
 		child = NULL;
@@ -1014,7 +1015,7 @@ static struct fib6_node *fib6_repair_tree(struct net *net,
 			fn->leaf = fib6_find_prefix(net, fn);
 #if RT6_DEBUG >= 2
 			if (fn->leaf==NULL) {
-				BUG_TRAP(fn->leaf);
+				WARN_ON(!fn->leaf);
 				fn->leaf = net->ipv6.ip6_null_entry;
 			}
 #endif
@@ -1025,16 +1026,17 @@ static struct fib6_node *fib6_repair_tree(struct net *net,
 		pn = fn->parent;
 #ifdef CONFIG_IPV6_SUBTREES
 		if (FIB6_SUBTREE(pn) == fn) {
-			BUG_TRAP(fn->fn_flags&RTN_ROOT);
+			WARN_ON(!(fn->fn_flags & RTN_ROOT));
 			FIB6_SUBTREE(pn) = NULL;
 			nstate = FWS_L;
 		} else {
-			BUG_TRAP(!(fn->fn_flags&RTN_ROOT));
+			WARN_ON(fn->fn_flags & RTN_ROOT);
 #endif
 			if (pn->right == fn) pn->right = child;
 			else if (pn->left == fn) pn->left = child;
 #if RT6_DEBUG >= 2
-			else BUG_TRAP(0);
+			else
+				WARN_ON(1);
 #endif
 			if (child)
 				child->parent = pn;
@@ -1154,14 +1156,14 @@ int fib6_del(struct rt6_info *rt, struct nl_info *info)
 
 #if RT6_DEBUG >= 2
 	if (rt->u.dst.obsolete>0) {
-		BUG_TRAP(fn==NULL);
+		WARN_ON(fn != NULL);
 		return -ENOENT;
 	}
 #endif
 	if (fn == NULL || rt == net->ipv6.ip6_null_entry)
 		return -ENOENT;
 
-	BUG_TRAP(fn->fn_flags&RTN_RTINFO);
+	WARN_ON(!(fn->fn_flags & RTN_RTINFO));
 
 	if (!(rt->rt6i_flags&RTF_CACHE)) {
 		struct fib6_node *pn = fn;
@@ -1266,7 +1268,7 @@ static int fib6_walk_continue(struct fib6_walker_t *w)
 			w->node = pn;
 #ifdef CONFIG_IPV6_SUBTREES
 			if (FIB6_SUBTREE(pn) == fn) {
-				BUG_TRAP(fn->fn_flags&RTN_ROOT);
+				WARN_ON(!(fn->fn_flags & RTN_ROOT));
 				w->state = FWS_L;
 				continue;
 			}
@@ -1281,7 +1283,7 @@ static int fib6_walk_continue(struct fib6_walker_t *w)
 				continue;
 			}
 #if RT6_DEBUG >= 2
-			BUG_TRAP(0);
+			WARN_ON(1);
 #endif
 		}
 	}
@@ -1323,7 +1325,7 @@ static int fib6_clean_node(struct fib6_walker_t *w)
 			}
 			return 0;
 		}
-		BUG_TRAP(res==0);
+		WARN_ON(res != 0);
 	}
 	w->leaf = rt;
 	return 0;
diff --git a/net/ipv6/ip6_output.c b/net/ipv6/ip6_output.c
index 6407c64ea4a5..0e844c2736a7 100644
--- a/net/ipv6/ip6_output.c
+++ b/net/ipv6/ip6_output.c
@@ -116,7 +116,7 @@ static int ip6_dev_loopback_xmit(struct sk_buff *newskb)
 	__skb_pull(newskb, skb_network_offset(newskb));
 	newskb->pkt_type = PACKET_LOOPBACK;
 	newskb->ip_summed = CHECKSUM_UNNECESSARY;
-	BUG_TRAP(newskb->dst);
+	WARN_ON(!newskb->dst);
 
 	netif_rx(newskb);
 	return 0;
@@ -236,6 +236,10 @@ int ip6_xmit(struct sock *sk, struct sk_buff *skb, struct flowi *fl,
 	skb_reset_network_header(skb);
 	hdr = ipv6_hdr(skb);
 
+	/* Allow local fragmentation. */
+	if (ipfragok)
+		skb->local_df = 1;
+
 	/*
 	 *	Fill in the IPv6 header
 	 */
@@ -265,7 +269,7 @@ int ip6_xmit(struct sock *sk, struct sk_buff *skb, struct flowi *fl,
 	skb->mark = sk->sk_mark;
 
 	mtu = dst_mtu(dst);
-	if ((skb->len <= mtu) || ipfragok || skb_is_gso(skb)) {
+	if ((skb->len <= mtu) || skb->local_df || skb_is_gso(skb)) {
 		IP6_INC_STATS(ip6_dst_idev(skb->dst),
 			      IPSTATS_MIB_OUTREQUESTS);
 		return NF_HOOK(PF_INET6, NF_INET_LOCAL_OUT, skb, NULL, dst->dev,
@@ -930,7 +934,7 @@ static int ip6_dst_lookup_tail(struct sock *sk,
 		goto out_err_release;
 
 	if (ipv6_addr_any(&fl->fl6_src)) {
-		err = ipv6_dev_get_saddr(ip6_dst_idev(*dst)->dev,
+		err = ipv6_dev_get_saddr(net, ip6_dst_idev(*dst)->dev,
 					 &fl->fl6_dst,
 					 sk ? inet6_sk(sk)->srcprefs : 0,
 					 &fl->fl6_src);
diff --git a/net/ipv6/ipcomp6.c b/net/ipv6/ipcomp6.c
index ee6de425ce6b..4545e4306862 100644
--- a/net/ipv6/ipcomp6.c
+++ b/net/ipv6/ipcomp6.c
@@ -50,125 +50,6 @@
 #include <linux/icmpv6.h>
 #include <linux/mutex.h>
 
-struct ipcomp6_tfms {
-	struct list_head list;
-	struct crypto_comp **tfms;
-	int users;
-};
-
-static DEFINE_MUTEX(ipcomp6_resource_mutex);
-static void **ipcomp6_scratches;
-static int ipcomp6_scratch_users;
-static LIST_HEAD(ipcomp6_tfms_list);
-
-static int ipcomp6_input(struct xfrm_state *x, struct sk_buff *skb)
-{
-	int nexthdr;
-	int err = -ENOMEM;
-	struct ip_comp_hdr *ipch;
-	int plen, dlen;
-	struct ipcomp_data *ipcd = x->data;
-	u8 *start, *scratch;
-	struct crypto_comp *tfm;
-	int cpu;
-
-	if (skb_linearize_cow(skb))
-		goto out;
-
-	skb->ip_summed = CHECKSUM_NONE;
-
-	/* Remove ipcomp header and decompress original payload */
-	ipch = (void *)skb->data;
-	nexthdr = ipch->nexthdr;
-
-	skb->transport_header = skb->network_header + sizeof(*ipch);
-	__skb_pull(skb, sizeof(*ipch));
-
-	/* decompression */
-	plen = skb->len;
-	dlen = IPCOMP_SCRATCH_SIZE;
-	start = skb->data;
-
-	cpu = get_cpu();
-	scratch = *per_cpu_ptr(ipcomp6_scratches, cpu);
-	tfm = *per_cpu_ptr(ipcd->tfms, cpu);
-
-	err = crypto_comp_decompress(tfm, start, plen, scratch, &dlen);
-	if (err)
-		goto out_put_cpu;
-
-	if (dlen < (plen + sizeof(*ipch))) {
-		err = -EINVAL;
-		goto out_put_cpu;
-	}
-
-	err = pskb_expand_head(skb, 0, dlen - plen, GFP_ATOMIC);
-	if (err) {
-		goto out_put_cpu;
-	}
-
-	skb->truesize += dlen - plen;
-	__skb_put(skb, dlen - plen);
-	skb_copy_to_linear_data(skb, scratch, dlen);
-	err = nexthdr;
-
-out_put_cpu:
-	put_cpu();
-out:
-	return err;
-}
-
-static int ipcomp6_output(struct xfrm_state *x, struct sk_buff *skb)
-{
-	int err;
-	struct ip_comp_hdr *ipch;
-	struct ipcomp_data *ipcd = x->data;
-	int plen, dlen;
-	u8 *start, *scratch;
-	struct crypto_comp *tfm;
-	int cpu;
-
-	/* check whether datagram len is larger than threshold */
-	if (skb->len < ipcd->threshold) {
-		goto out_ok;
-	}
-
-	if (skb_linearize_cow(skb))
-		goto out_ok;
-
-	/* compression */
-	plen = skb->len;
-	dlen = IPCOMP_SCRATCH_SIZE;
-	start = skb->data;
-
-	cpu = get_cpu();
-	scratch = *per_cpu_ptr(ipcomp6_scratches, cpu);
-	tfm = *per_cpu_ptr(ipcd->tfms, cpu);
-
-	local_bh_disable();
-	err = crypto_comp_compress(tfm, start, plen, scratch, &dlen);
-	local_bh_enable();
-	if (err || (dlen + sizeof(*ipch)) >= plen) {
-		put_cpu();
-		goto out_ok;
-	}
-	memcpy(start + sizeof(struct ip_comp_hdr), scratch, dlen);
-	put_cpu();
-	pskb_trim(skb, dlen + sizeof(struct ip_comp_hdr));
-
-	/* insert ipcomp header and replace datagram */
-	ipch = ip_comp_hdr(skb);
-	ipch->nexthdr = *skb_mac_header(skb);
-	ipch->flags = 0;
-	ipch->cpi = htons((u16 )ntohl(x->id.spi));
-	*skb_mac_header(skb) = IPPROTO_COMP;
-
-out_ok:
-	skb_push(skb, -skb_network_offset(skb));
-
-	return 0;
-}
-
 static void ipcomp6_err(struct sk_buff *skb, struct inet6_skb_parm *opt,
 				int type, int code, int offset, __be32 info)
 {
@@ -251,160 +132,9 @@ out:
 	return err;
 }
 
-static void ipcomp6_free_scratches(void)
-{
-	int i;
-	void **scratches;
-
-	if (--ipcomp6_scratch_users)
-		return;
-
-	scratches = ipcomp6_scratches;
-	if (!scratches)
-		return;
-
-	for_each_possible_cpu(i) {
-		void *scratch = *per_cpu_ptr(scratches, i);
-
-		vfree(scratch);
-	}
-
-	free_percpu(scratches);
-}
-
-static void **ipcomp6_alloc_scratches(void)
-{
-	int i;
-	void **scratches;
-
-	if (ipcomp6_scratch_users++)
-		return ipcomp6_scratches;
-
-	scratches = alloc_percpu(void *);
-	if (!scratches)
-		return NULL;
-
-	ipcomp6_scratches = scratches;
-
-	for_each_possible_cpu(i) {
-		void *scratch = vmalloc(IPCOMP_SCRATCH_SIZE);
-		if (!scratch)
-			return NULL;
-		*per_cpu_ptr(scratches, i) = scratch;
-	}
-
-	return scratches;
-}
-
-static void ipcomp6_free_tfms(struct crypto_comp **tfms)
-{
-	struct ipcomp6_tfms *pos;
-	int cpu;
-
-	list_for_each_entry(pos, &ipcomp6_tfms_list, list) {
-		if (pos->tfms == tfms)
-			break;
-	}
-
-	BUG_TRAP(pos);
-
-	if (--pos->users)
-		return;
-
-	list_del(&pos->list);
-	kfree(pos);
-
-	if (!tfms)
-		return;
-
-	for_each_possible_cpu(cpu) {
-		struct crypto_comp *tfm = *per_cpu_ptr(tfms, cpu);
-		crypto_free_comp(tfm);
-	}
-	free_percpu(tfms);
-}
-
-static struct crypto_comp **ipcomp6_alloc_tfms(const char *alg_name)
-{
-	struct ipcomp6_tfms *pos;
-	struct crypto_comp **tfms;
-	int cpu;
-
-	/* This can be any valid CPU ID so we don't need locking. */
-	cpu = raw_smp_processor_id();
-
-	list_for_each_entry(pos, &ipcomp6_tfms_list, list) {
-		struct crypto_comp *tfm;
-
-		tfms = pos->tfms;
-		tfm = *per_cpu_ptr(tfms, cpu);
-
-		if (!strcmp(crypto_comp_name(tfm), alg_name)) {
-			pos->users++;
-			return tfms;
-		}
-	}
-
-	pos = kmalloc(sizeof(*pos), GFP_KERNEL);
-	if (!pos)
-		return NULL;
-
-	pos->users = 1;
-	INIT_LIST_HEAD(&pos->list);
-	list_add(&pos->list, &ipcomp6_tfms_list);
-
-	pos->tfms = tfms = alloc_percpu(struct crypto_comp *);
-	if (!tfms)
-		goto error;
-
-	for_each_possible_cpu(cpu) {
-		struct crypto_comp *tfm = crypto_alloc_comp(alg_name, 0,
-							    CRYPTO_ALG_ASYNC);
-		if (IS_ERR(tfm))
-			goto error;
-		*per_cpu_ptr(tfms, cpu) = tfm;
-	}
-
-	return tfms;
-
-error:
-	ipcomp6_free_tfms(tfms);
-	return NULL;
-}
-
-static void ipcomp6_free_data(struct ipcomp_data *ipcd)
-{
-	if (ipcd->tfms)
-		ipcomp6_free_tfms(ipcd->tfms);
-	ipcomp6_free_scratches();
-}
-
-static void ipcomp6_destroy(struct xfrm_state *x)
-{
-	struct ipcomp_data *ipcd = x->data;
-	if (!ipcd)
-		return;
-	xfrm_state_delete_tunnel(x);
-	mutex_lock(&ipcomp6_resource_mutex);
-	ipcomp6_free_data(ipcd);
-	mutex_unlock(&ipcomp6_resource_mutex);
-	kfree(ipcd);
-
-	xfrm6_tunnel_free_spi((xfrm_address_t *)&x->props.saddr);
-}
-
 static int ipcomp6_init_state(struct xfrm_state *x)
 {
-	int err;
-	struct ipcomp_data *ipcd;
-	struct xfrm_algo_desc *calg_desc;
-
-	err = -EINVAL;
-	if (!x->calg)
-		goto out;
-
-	if (x->encap)
-		goto out;
+	int err = -EINVAL;
 
 	x->props.header_len = 0;
 	switch (x->props.mode) {
@@ -417,39 +147,21 @@ static int ipcomp6_init_state(struct xfrm_state *x)
 		goto out;
 	}
 
-	err = -ENOMEM;
-	ipcd = kzalloc(sizeof(*ipcd), GFP_KERNEL);
-	if (!ipcd)
+	err = ipcomp_init_state(x);
+	if (err)
 		goto out;
 
-	mutex_lock(&ipcomp6_resource_mutex);
-	if (!ipcomp6_alloc_scratches())
-		goto error;
-
-	ipcd->tfms = ipcomp6_alloc_tfms(x->calg->alg_name);
-	if (!ipcd->tfms)
-		goto error;
-	mutex_unlock(&ipcomp6_resource_mutex);
-
 	if (x->props.mode == XFRM_MODE_TUNNEL) {
 		err = ipcomp6_tunnel_attach(x);
 		if (err)
 			goto error_tunnel;
 	}
 
-	calg_desc = xfrm_calg_get_byname(x->calg->alg_name, 0);
-	BUG_ON(!calg_desc);
-	ipcd->threshold = calg_desc->uinfo.comp.threshold;
-	x->data = ipcd;
 	err = 0;
 out:
 	return err;
 error_tunnel:
-	mutex_lock(&ipcomp6_resource_mutex);
-error:
-	ipcomp6_free_data(ipcd);
-	mutex_unlock(&ipcomp6_resource_mutex);
-	kfree(ipcd);
+	ipcomp_destroy(x);
 
 	goto out;
 }
@@ -460,9 +172,9 @@ static const struct xfrm_type ipcomp6_type =
 	.owner		= THIS_MODULE,
 	.proto		= IPPROTO_COMP,
 	.init_state	= ipcomp6_init_state,
-	.destructor	= ipcomp6_destroy,
-	.input		= ipcomp6_input,
-	.output		= ipcomp6_output,
+	.destructor	= ipcomp_destroy,
+	.input		= ipcomp_input,
+	.output		= ipcomp_output,
 	.hdr_offset	= xfrm6_find_1stfragopt,
 };
 
diff --git a/net/ipv6/ipv6_sockglue.c b/net/ipv6/ipv6_sockglue.c
index ea33b26512c2..4e5eac301f91 100644
--- a/net/ipv6/ipv6_sockglue.c
+++ b/net/ipv6/ipv6_sockglue.c
@@ -346,6 +346,8 @@ static int do_ipv6_setsockopt(struct sock *sk, int level, int optname,
 		 */
 		if (optlen == 0)
 			optval = NULL;
+		else if (optval == NULL)
+			goto e_inval;
 		else if (optlen < sizeof(struct ipv6_opt_hdr) ||
 			 optlen & 0x7 || optlen > 8 * 255)
 			goto e_inval;
@@ -909,7 +911,7 @@ static int do_ipv6_getsockopt(struct sock *sk, int level, int optname,
 		} else {
 			if (np->rxopt.bits.rxinfo) {
 				struct in6_pktinfo src_info;
-				src_info.ipi6_ifindex = np->mcast_oif;
+				src_info.ipi6_ifindex = np->mcast_oif ? np->mcast_oif : sk->sk_bound_dev_if;
 				ipv6_addr_copy(&src_info.ipi6_addr, &np->daddr);
 				put_cmsg(&msg, SOL_IPV6, IPV6_PKTINFO, sizeof(src_info), &src_info);
 			}
@@ -919,7 +921,7 @@ static int do_ipv6_getsockopt(struct sock *sk, int level, int optname,
 			}
 			if (np->rxopt.bits.rxoinfo) {
 				struct in6_pktinfo src_info;
-				src_info.ipi6_ifindex = np->mcast_oif;
+				src_info.ipi6_ifindex = np->mcast_oif ? np->mcast_oif : sk->sk_bound_dev_if;
 				ipv6_addr_copy(&src_info.ipi6_addr, &np->daddr);
 				put_cmsg(&msg, SOL_IPV6, IPV6_2292PKTINFO, sizeof(src_info), &src_info);
 			}
diff --git a/net/ipv6/mip6.c b/net/ipv6/mip6.c
index ad1cc5bbf977..31295c8f6196 100644
--- a/net/ipv6/mip6.c
+++ b/net/ipv6/mip6.c
@@ -164,8 +164,8 @@ static int mip6_destopt_output(struct xfrm_state *x, struct sk_buff *skb)
 			calc_padlen(sizeof(*dstopt), 6));
 
 	hao->type = IPV6_TLV_HAO;
+	BUILD_BUG_ON(sizeof(*hao) != 18);
 	hao->length = sizeof(*hao) - 2;
-	BUG_TRAP(hao->length == 16);
 
 	len = ((char *)hao - (char *)dstopt) + sizeof(*hao);
 
@@ -174,7 +174,7 @@ static int mip6_destopt_output(struct xfrm_state *x, struct sk_buff *skb)
 	memcpy(&iph->saddr, x->coaddr, sizeof(iph->saddr));
 	spin_unlock_bh(&x->lock);
 
-	BUG_TRAP(len == x->props.header_len);
+	WARN_ON(len != x->props.header_len);
 	dstopt->hdrlen = (x->props.header_len >> 3) - 1;
 
 	return 0;
@@ -317,7 +317,7 @@ static int mip6_destopt_init_state(struct xfrm_state *x)
 	x->props.header_len = sizeof(struct ipv6_destopt_hdr) +
 		calc_padlen(sizeof(struct ipv6_destopt_hdr), 6) +
 		sizeof(struct ipv6_destopt_hao);
-	BUG_TRAP(x->props.header_len == 24);
+	WARN_ON(x->props.header_len != 24);
 
 	return 0;
 }
@@ -380,7 +380,7 @@ static int mip6_rthdr_output(struct xfrm_state *x, struct sk_buff *skb)
 	rt2->rt_hdr.segments_left = 1;
 	memset(&rt2->reserved, 0, sizeof(rt2->reserved));
 
-	BUG_TRAP(rt2->rt_hdr.hdrlen == 2);
+	WARN_ON(rt2->rt_hdr.hdrlen != 2);
 
 	memcpy(&rt2->addr, &iph->daddr, sizeof(rt2->addr));
 	spin_lock_bh(&x->lock);
diff --git a/net/ipv6/ndisc.c b/net/ipv6/ndisc.c
index beb48e3f038a..f1c62ba0f56b 100644
--- a/net/ipv6/ndisc.c
+++ b/net/ipv6/ndisc.c
@@ -549,7 +549,7 @@ static void ndisc_send_na(struct net_device *dev, struct neighbour *neigh,
 			override = 0;
 		in6_ifa_put(ifp);
 	} else {
-		if (ipv6_dev_get_saddr(dev, daddr,
+		if (ipv6_dev_get_saddr(dev_net(dev), dev, daddr,
 				       inet6_sk(dev_net(dev)->ipv6.ndisc_sk)->srcprefs,
 				       &tmpaddr))
 			return;
diff --git a/net/ipv6/netfilter/ip6table_security.c b/net/ipv6/netfilter/ip6table_security.c
index a07abee30497..6e7131036bc6 100644
--- a/net/ipv6/netfilter/ip6table_security.c
+++ b/net/ipv6/netfilter/ip6table_security.c
@@ -31,7 +31,7 @@ static struct
 	struct ip6t_replace repl;
 	struct ip6t_standard entries[3];
 	struct ip6t_error term;
-} initial_table __initdata = {
+} initial_table __net_initdata = {
 	.repl = {
 		.name = "security",
 		.valid_hooks = SECURITY_VALID_HOOKS,
diff --git a/net/ipv6/netfilter/nf_conntrack_reasm.c b/net/ipv6/netfilter/nf_conntrack_reasm.c
index cf20bc4fd60d..52d06dd4b817 100644
--- a/net/ipv6/netfilter/nf_conntrack_reasm.c
+++ b/net/ipv6/netfilter/nf_conntrack_reasm.c
@@ -416,8 +416,8 @@ nf_ct_frag6_reasm(struct nf_ct_frag6_queue *fq, struct net_device *dev)
 
 	fq_kill(fq);
 
-	BUG_TRAP(head != NULL);
-	BUG_TRAP(NFCT_FRAG6_CB(head)->offset == 0);
+	WARN_ON(head == NULL);
+	WARN_ON(NFCT_FRAG6_CB(head)->offset != 0);
 
 	/* Unfragmented part is taken from the first segment. */
 	payload_len = ((head->data - skb_network_header(head)) -
diff --git a/net/ipv6/proc.c b/net/ipv6/proc.c
index f82f6074cf85..0179b66864f1 100644
--- a/net/ipv6/proc.c
+++ b/net/ipv6/proc.c
@@ -286,7 +286,6 @@ proc_net_fail:
 
 void ipv6_misc_proc_exit(void)
 {
-	proc_net_remove(&init_net, "sockstat6");
 	proc_net_remove(&init_net, "dev_snmp6");
 	proc_net_remove(&init_net, "snmp6");
 	unregister_pernet_subsys(&ipv6_proc_ops);
diff --git a/net/ipv6/raw.c b/net/ipv6/raw.c
index 01d47674f7e5..e53e493606c5 100644
--- a/net/ipv6/raw.c
+++ b/net/ipv6/raw.c
@@ -377,14 +377,14 @@ static inline int rawv6_rcv_skb(struct sock * sk, struct sk_buff * skb)
 	    skb_checksum_complete(skb)) {
 		atomic_inc(&sk->sk_drops);
 		kfree_skb(skb);
-		return 0;
+		return NET_RX_DROP;
 	}
 
 	/* Charge it to the socket. */
 	if (sock_queue_rcv_skb(sk,skb)<0) {
 		atomic_inc(&sk->sk_drops);
 		kfree_skb(skb);
-		return 0;
+		return NET_RX_DROP;
 	}
 
 	return 0;
@@ -429,7 +429,7 @@ int rawv6_rcv(struct sock *sk, struct sk_buff *skb)
 		if (skb_checksum_complete(skb)) {
 			atomic_inc(&sk->sk_drops);
 			kfree_skb(skb);
-			return 0;
+			return NET_RX_DROP;
 		}
 	}
 
diff --git a/net/ipv6/reassembly.c b/net/ipv6/reassembly.c
index 6ab957ec2dd6..89184b576e23 100644
--- a/net/ipv6/reassembly.c
+++ b/net/ipv6/reassembly.c
@@ -473,8 +473,8 @@ static int ip6_frag_reasm(struct frag_queue *fq, struct sk_buff *prev,
 		fq->q.fragments = head;
 	}
 
-	BUG_TRAP(head != NULL);
-	BUG_TRAP(FRAG6_CB(head)->offset == 0);
+	WARN_ON(head == NULL);
+	WARN_ON(FRAG6_CB(head)->offset != 0);
 
 	/* Unfragmented part is taken from the first segment. */
 	payload_len = ((head->data - skb_network_header(head)) -
diff --git a/net/ipv6/route.c b/net/ipv6/route.c
index 86540b24b27c..9af6115f0f50 100644
--- a/net/ipv6/route.c
+++ b/net/ipv6/route.c
@@ -1249,7 +1249,7 @@ install_route:
 
 	if (dst_metric(&rt->u.dst, RTAX_HOPLIMIT) == 0)
 		rt->u.dst.metrics[RTAX_HOPLIMIT-1] = -1;
-	if (!dst_metric(&rt->u.dst, RTAX_MTU))
+	if (!dst_mtu(&rt->u.dst))
 		rt->u.dst.metrics[RTAX_MTU-1] = ipv6_get_mtu(dev);
 	if (!dst_metric(&rt->u.dst, RTAX_ADVMSS))
 		rt->u.dst.metrics[RTAX_ADVMSS-1] = ipv6_advmss(net, dst_mtu(&rt->u.dst));
@@ -2106,7 +2106,8 @@ static inline size_t rt6_nlmsg_size(void)
 	       + nla_total_size(sizeof(struct rta_cacheinfo));
 }
 
-static int rt6_fill_node(struct sk_buff *skb, struct rt6_info *rt,
+static int rt6_fill_node(struct net *net,
+			 struct sk_buff *skb, struct rt6_info *rt,
 			 struct in6_addr *dst, struct in6_addr *src,
 			 int iif, int type, u32 pid, u32 seq,
 			 int prefix, int nowait, unsigned int flags)
@@ -2187,8 +2188,9 @@ static int rt6_fill_node(struct sk_buff *skb, struct rt6_info *rt,
 #endif
 			NLA_PUT_U32(skb, RTA_IIF, iif);
 	} else if (dst) {
+		struct inet6_dev *idev = ip6_dst_idev(&rt->u.dst);
 		struct in6_addr saddr_buf;
-		if (ipv6_dev_get_saddr(ip6_dst_idev(&rt->u.dst)->dev,
+		if (ipv6_dev_get_saddr(net, idev ? idev->dev : NULL,
 				       dst, 0, &saddr_buf) == 0)
 			NLA_PUT(skb, RTA_PREFSRC, 16, &saddr_buf);
 	}
@@ -2233,7 +2235,8 @@ int rt6_dump_route(struct rt6_info *rt, void *p_arg)
 	} else
 		prefix = 0;
 
-	return rt6_fill_node(arg->skb, rt, NULL, NULL, 0, RTM_NEWROUTE,
+	return rt6_fill_node(arg->net,
+		     arg->skb, rt, NULL, NULL, 0, RTM_NEWROUTE,
 		     NETLINK_CB(arg->cb->skb).pid, arg->cb->nlh->nlmsg_seq,
 		     prefix, 0, NLM_F_MULTI);
 }
@@ -2299,7 +2302,7 @@ static int inet6_rtm_getroute(struct sk_buff *in_skb, struct nlmsghdr* nlh, void
 	rt = (struct rt6_info*) ip6_route_output(net, NULL, &fl);
 	skb->dst = &rt->u.dst;
 
-	err = rt6_fill_node(skb, rt, &fl.fl6_dst, &fl.fl6_src, iif,
+	err = rt6_fill_node(net, skb, rt, &fl.fl6_dst, &fl.fl6_src, iif,
 			    RTM_NEWROUTE, NETLINK_CB(in_skb).pid,
 			    nlh->nlmsg_seq, 0, 0, 0);
 	if (err < 0) {
@@ -2326,7 +2329,7 @@ void inet6_rt_notify(int event, struct rt6_info *rt, struct nl_info *info)
 	if (skb == NULL)
 		goto errout;
 
-	err = rt6_fill_node(skb, rt, NULL, NULL, 0,
+	err = rt6_fill_node(net, skb, rt, NULL, NULL, 0,
 				event, info->pid, seq, 0, 0, 0);
 	if (err < 0) {
 		/* -EMSGSIZE implies BUG in rt6_nlmsg_size() */
diff --git a/net/ipv6/syncookies.c b/net/ipv6/syncookies.c
index 6a68eeb7bbf8..ec394cf5a19b 100644
--- a/net/ipv6/syncookies.c
+++ b/net/ipv6/syncookies.c
@@ -199,10 +199,8 @@ struct sock *cookie_v6_check(struct sock *sk, struct sk_buff *skb)
 	ireq6 = inet6_rsk(req);
 	treq = tcp_rsk(req);
 
-	if (security_inet_conn_request(sk, skb, req)) {
-		reqsk_free(req);
-		goto out;
-	}
+	if (security_inet_conn_request(sk, skb, req))
+		goto out_free;
 
 	req->mss = mss;
 	ireq->rmt_port = th->source;
@@ -223,6 +221,7 @@ struct sock *cookie_v6_check(struct sock *sk, struct sk_buff *skb)
 
 	req->expires = 0UL;
 	req->retrans = 0;
+	ireq->ecn_ok		= 0;
 	ireq->snd_wscale	= tcp_opt.snd_wscale;
 	ireq->rcv_wscale	= tcp_opt.rcv_wscale;
 	ireq->sack_ok		= tcp_opt.sack_ok;
@@ -254,14 +253,13 @@ struct sock *cookie_v6_check(struct sock *sk, struct sk_buff *skb)
 		fl.fl_ip_dport = inet_rsk(req)->rmt_port;
 		fl.fl_ip_sport = inet_sk(sk)->sport;
 		security_req_classify_flow(req, &fl);
-		if (ip6_dst_lookup(sk, &dst, &fl)) {
-			reqsk_free(req);
-			goto out;
-		}
+		if (ip6_dst_lookup(sk, &dst, &fl))
+			goto out_free;
+
 		if (final_p)
 			ipv6_addr_copy(&fl.fl6_dst, final_p);
 		if ((xfrm_lookup(&dst, &fl, sk, 0)) < 0)
-			goto out;
+			goto out_free;
 	}
 
 	req->window_clamp = tp->window_clamp ? :dst_metric(dst, RTAX_WINDOW);
@@ -272,7 +270,10 @@ struct sock *cookie_v6_check(struct sock *sk, struct sk_buff *skb)
 	ireq->rcv_wscale = rcv_wscale;
 
 	ret = get_cookie_sock(sk, skb, req, dst);
-
-out:	return ret;
+out:
+	return ret;
+out_free:
+	reqsk_free(req);
+	return NULL;
 }
 
diff --git a/net/ipv6/sysctl_net_ipv6.c b/net/ipv6/sysctl_net_ipv6.c
index 5c99274558bf..587f8f60c489 100644
--- a/net/ipv6/sysctl_net_ipv6.c
+++ b/net/ipv6/sysctl_net_ipv6.c
@@ -150,3 +150,19 @@ void ipv6_sysctl_unregister(void)
 	unregister_net_sysctl_table(ip6_header);
 	unregister_pernet_subsys(&ipv6_sysctl_net_ops);
 }
+
+static struct ctl_table_header *ip6_base;
+
+int ipv6_static_sysctl_register(void)
+{
+	static struct ctl_table empty[1];
+	ip6_base = register_sysctl_paths(net_ipv6_ctl_path, empty);
+	if (ip6_base == NULL)
+		return -ENOMEM;
+	return 0;
+}
+
+void ipv6_static_sysctl_unregister(void)
+{
+	unregister_net_sysctl_table(ip6_base);
+}
diff --git a/net/ipv6/tcp_ipv6.c b/net/ipv6/tcp_ipv6.c
index ae45f9835014..5b90b369ccb2 100644
--- a/net/ipv6/tcp_ipv6.c
+++ b/net/ipv6/tcp_ipv6.c
@@ -69,7 +69,8 @@
 #include <linux/scatterlist.h>
 
 static void	tcp_v6_send_reset(struct sock *sk, struct sk_buff *skb);
-static void	tcp_v6_reqsk_send_ack(struct sk_buff *skb, struct request_sock *req);
+static void	tcp_v6_reqsk_send_ack(struct sock *sk, struct sk_buff *skb,
+				      struct request_sock *req);
 
 static int	tcp_v6_do_rcv(struct sock *sk, struct sk_buff *skb);
 
@@ -421,7 +422,7 @@ static void tcp_v6_err(struct sk_buff *skb, struct inet6_skb_parm *opt,
 		/* ICMPs are not backlogged, hence we cannot get
 		 * an established socket here.
 		 */
-		BUG_TRAP(req->sk == NULL);
+		WARN_ON(req->sk != NULL);
 
 		if (seq != tcp_rsk(req)->snt_isn) {
 			NET_INC_STATS_BH(net, LINUX_MIB_OUTOFWINDOWICMPS);
@@ -748,7 +749,7 @@ static int tcp_v6_md5_hash_pseudoheader(struct tcp_md5sig_pool *hp,
 	ipv6_addr_copy(&bp->saddr, saddr);
 	ipv6_addr_copy(&bp->daddr, daddr);
 	bp->protocol = cpu_to_be32(IPPROTO_TCP);
-	bp->len = cpu_to_be16(nbytes);
+	bp->len = cpu_to_be32(nbytes);
 
 	sg_init_one(&sg, bp, sizeof(*bp));
 	return crypto_hash_update(&hp->md5_desc, &sg, sizeof(*bp));
@@ -849,28 +850,17 @@ static int tcp_v6_inbound_md5_hash (struct sock *sk, struct sk_buff *skb)
 	hash_expected = tcp_v6_md5_do_lookup(sk, &ip6h->saddr);
 	hash_location = tcp_parse_md5sig_option(th);
 
-	/* do we have a hash as expected? */
-	if (!hash_expected) {
-		if (!hash_location)
-			return 0;
-		if (net_ratelimit()) {
-			printk(KERN_INFO "MD5 Hash NOT expected but found "
-			       "(" NIP6_FMT ", %u)->"
-			       "(" NIP6_FMT ", %u)\n",
-			       NIP6(ip6h->saddr), ntohs(th->source),
-			       NIP6(ip6h->daddr), ntohs(th->dest));
-		}
+	/* We've parsed the options - do we have a hash? */
+	if (!hash_expected && !hash_location)
+		return 0;
+
+	if (hash_expected && !hash_location) {
+		NET_INC_STATS_BH(sock_net(sk), LINUX_MIB_TCPMD5NOTFOUND);
 		return 1;
 	}
 
-	if (!hash_location) {
-		if (net_ratelimit()) {
-			printk(KERN_INFO "MD5 Hash expected but NOT found "
-			       "(" NIP6_FMT ", %u)->"
-			       "(" NIP6_FMT ", %u)\n",
-			       NIP6(ip6h->saddr), ntohs(th->source),
-			       NIP6(ip6h->daddr), ntohs(th->dest));
-		}
+	if (!hash_expected && hash_location) {
+		NET_INC_STATS_BH(sock_net(sk), LINUX_MIB_TCPMD5UNEXPECTED);
 		return 1;
 	}
 
@@ -1105,8 +1095,8 @@ static void tcp_v6_send_ack(struct sk_buff *skb, u32 seq, u32 ack, u32 win, u32
 		*topt++ = htonl((TCPOPT_NOP << 24) | (TCPOPT_NOP << 16) |
 				(TCPOPT_MD5SIG << 8) | TCPOLEN_MD5SIG);
 		tcp_v6_md5_hash_hdr((__u8 *)topt, key,
-				    &ipv6_hdr(skb)->daddr,
-				    &ipv6_hdr(skb)->saddr, t1);
+				    &ipv6_hdr(skb)->saddr,
+				    &ipv6_hdr(skb)->daddr, t1);
 	}
 #endif
 
@@ -1149,10 +1139,11 @@ static void tcp_v6_timewait_ack(struct sock *sk, struct sk_buff *skb)
 	inet_twsk_put(tw);
 }
 
-static void tcp_v6_reqsk_send_ack(struct sk_buff *skb, struct request_sock *req)
+static void tcp_v6_reqsk_send_ack(struct sock *sk, struct sk_buff *skb,
+				  struct request_sock *req)
 {
 	tcp_v6_send_ack(skb, tcp_rsk(req)->snt_isn + 1, tcp_rsk(req)->rcv_isn + 1, req->rcv_wnd, req->ts_recent,
-			tcp_v6_md5_do_lookup(skb->sk, &ipv6_hdr(skb)->daddr));
+			tcp_v6_md5_do_lookup(sk, &ipv6_hdr(skb)->daddr));
 }
 
 
diff --git a/net/ipv6/udp.c b/net/ipv6/udp.c
index d1477b350f76..a6aecf76a71b 100644
--- a/net/ipv6/udp.c
+++ b/net/ipv6/udp.c
@@ -379,7 +379,7 @@ static int __udp6_lib_mcast_deliver(struct net *net, struct sk_buff *skb,
 					uh->source, saddr, dif))) {
 		struct sk_buff *buff = skb_clone(skb, GFP_ATOMIC);
 		if (buff) {
-			bh_lock_sock_nested(sk2);
+			bh_lock_sock(sk2);
 			if (!sock_owned_by_user(sk2))
 				udpv6_queue_rcv_skb(sk2, buff);
 			else
@@ -387,7 +387,7 @@ static int __udp6_lib_mcast_deliver(struct net *net, struct sk_buff *skb,
 			bh_unlock_sock(sk2);
 		}
 	}
-	bh_lock_sock_nested(sk);
+	bh_lock_sock(sk);
 	if (!sock_owned_by_user(sk))
 		udpv6_queue_rcv_skb(sk, skb);
 	else
@@ -508,7 +508,7 @@ int __udp6_lib_rcv(struct sk_buff *skb, struct hlist_head udptable[],
 
 	/* deliver */
 
-	bh_lock_sock_nested(sk);
+	bh_lock_sock(sk);
 	if (!sock_owned_by_user(sk))
 		udpv6_queue_rcv_skb(sk, skb);
 	else
diff --git a/net/ipv6/xfrm6_mode_beet.c b/net/ipv6/xfrm6_mode_beet.c
index d6ce400f585f..bbd48b101bae 100644
--- a/net/ipv6/xfrm6_mode_beet.c
+++ b/net/ipv6/xfrm6_mode_beet.c
@@ -40,16 +40,39 @@ static void xfrm6_beet_make_header(struct sk_buff *skb)
 static int xfrm6_beet_output(struct xfrm_state *x, struct sk_buff *skb)
 {
 	struct ipv6hdr *top_iph;
-
-	skb_set_network_header(skb, -x->props.header_len);
+	struct ip_beet_phdr *ph;
+	struct iphdr *iphv4;
+	int optlen, hdr_len;
+
+	iphv4 = ip_hdr(skb);
+	hdr_len = 0;
+	optlen = XFRM_MODE_SKB_CB(skb)->optlen;
+	if (unlikely(optlen))
+		hdr_len += IPV4_BEET_PHMAXLEN - (optlen & 4);
+
+	skb_set_network_header(skb, -x->props.header_len - hdr_len);
+	if (x->sel.family != AF_INET6)
+		skb->network_header += IPV4_BEET_PHMAXLEN;
 	skb->mac_header = skb->network_header +
 			  offsetof(struct ipv6hdr, nexthdr);
 	skb->transport_header = skb->network_header + sizeof(*top_iph);
-	__skb_pull(skb, XFRM_MODE_SKB_CB(skb)->ihl);
+	ph = (struct ip_beet_phdr *)__skb_pull(skb, XFRM_MODE_SKB_CB(skb)->ihl-hdr_len);
 
 	xfrm6_beet_make_header(skb);
 
 	top_iph = ipv6_hdr(skb);
+	if (unlikely(optlen)) {
+
+		BUG_ON(optlen < 0);
+
+		ph->padlen = 4 - (optlen & 4);
+		ph->hdrlen = optlen / 8;
+		ph->nexthdr = top_iph->nexthdr;
+		if (ph->padlen)
+			memset(ph + 1, IPOPT_NOP, ph->padlen);
+
+		top_iph->nexthdr = IPPROTO_BEETPH;
+	}
 
 	ipv6_addr_copy(&top_iph->saddr, (struct in6_addr *)&x->props.saddr);
 	ipv6_addr_copy(&top_iph->daddr, (struct in6_addr *)&x->id.daddr);
diff --git a/net/ipv6/xfrm6_policy.c b/net/ipv6/xfrm6_policy.c
index 8f1e0543b3c4..08e4cbbe3f04 100644
--- a/net/ipv6/xfrm6_policy.c
+++ b/net/ipv6/xfrm6_policy.c
@@ -52,12 +52,14 @@ static struct dst_entry *xfrm6_dst_lookup(int tos, xfrm_address_t *saddr,
 static int xfrm6_get_saddr(xfrm_address_t *saddr, xfrm_address_t *daddr)
 {
 	struct dst_entry *dst;
+	struct net_device *dev;
 
 	dst = xfrm6_dst_lookup(0, NULL, daddr);
 	if (IS_ERR(dst))
 		return -EHOSTUNREACH;
 
-	ipv6_dev_get_saddr(ip6_dst_idev(dst)->dev,
+	dev = ip6_dst_idev(dst)->dev;
+	ipv6_dev_get_saddr(dev_net(dev), dev,
 			   (struct in6_addr *)&daddr->a6, 0,
 			   (struct in6_addr *)&saddr->a6);
 	dst_release(dst);
diff --git a/net/key/af_key.c b/net/key/af_key.c
index f0fc46c8038d..d628df97e02e 100644
--- a/net/key/af_key.c
+++ b/net/key/af_key.c
@@ -96,8 +96,8 @@ static void pfkey_sock_destruct(struct sock *sk)
 		return;
 	}
 
-	BUG_TRAP(!atomic_read(&sk->sk_rmem_alloc));
-	BUG_TRAP(!atomic_read(&sk->sk_wmem_alloc));
+	WARN_ON(atomic_read(&sk->sk_rmem_alloc));
+	WARN_ON(atomic_read(&sk->sk_wmem_alloc));
 
 	atomic_dec(&pfkey_socks_nr);
 }
diff --git a/net/mac80211/cfg.c b/net/mac80211/cfg.c
index 8e7ba0e62cf5..297c257864c7 100644
--- a/net/mac80211/cfg.c
+++ b/net/mac80211/cfg.c
@@ -81,6 +81,7 @@ static int ieee80211_change_iface(struct wiphy *wiphy, int ifindex,
 				  enum nl80211_iftype type, u32 *flags,
 				  struct vif_params *params)
 {
+	struct ieee80211_local *local = wiphy_priv(wiphy);
 	struct net_device *dev;
 	enum ieee80211_if_types itype;
 	struct ieee80211_sub_if_data *sdata;
@@ -95,6 +96,9 @@ static int ieee80211_change_iface(struct wiphy *wiphy, int ifindex,
 	if (itype == IEEE80211_IF_TYPE_INVALID)
 		return -EINVAL;
 
+	if (dev == local->mdev)
+		return -EOPNOTSUPP;
+
 	sdata = IEEE80211_DEV_TO_SUB_IF(dev);
 
 	ret = ieee80211_if_change_type(sdata, itype);
@@ -117,12 +121,16 @@ static int ieee80211_add_key(struct wiphy *wiphy, struct net_device *dev,
 			     u8 key_idx, u8 *mac_addr,
 			     struct key_params *params)
 {
+	struct ieee80211_local *local = wiphy_priv(wiphy);
 	struct ieee80211_sub_if_data *sdata;
 	struct sta_info *sta = NULL;
 	enum ieee80211_key_alg alg;
 	struct ieee80211_key *key;
 	int err;
 
+	if (dev == local->mdev)
+		return -EOPNOTSUPP;
+
 	sdata = IEEE80211_DEV_TO_SUB_IF(dev);
 
 	switch (params->cipher) {
@@ -167,10 +175,14 @@ static int ieee80211_add_key(struct wiphy *wiphy, struct net_device *dev,
 static int ieee80211_del_key(struct wiphy *wiphy, struct net_device *dev,
 			     u8 key_idx, u8 *mac_addr)
 {
+	struct ieee80211_local *local = wiphy_priv(wiphy);
 	struct ieee80211_sub_if_data *sdata;
 	struct sta_info *sta;
 	int ret;
 
+	if (dev == local->mdev)
+		return -EOPNOTSUPP;
+
 	sdata = IEEE80211_DEV_TO_SUB_IF(dev);
 
 	rcu_read_lock();
@@ -211,7 +223,8 @@ static int ieee80211_get_key(struct wiphy *wiphy, struct net_device *dev,
 			     void (*callback)(void *cookie,
 					      struct key_params *params))
 {
-	struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
+	struct ieee80211_local *local = wiphy_priv(wiphy);
+	struct ieee80211_sub_if_data *sdata;
 	struct sta_info *sta = NULL;
 	u8 seq[6] = {0};
 	struct key_params params;
@@ -220,6 +233,11 @@ static int ieee80211_get_key(struct wiphy *wiphy, struct net_device *dev,
 	u16 iv16;
 	int err = -ENOENT;
 
+	if (dev == local->mdev)
+		return -EOPNOTSUPP;
+
+	sdata = IEEE80211_DEV_TO_SUB_IF(dev);
+
 	rcu_read_lock();
 
 	if (mac_addr) {
@@ -293,8 +311,12 @@ static int ieee80211_config_default_key(struct wiphy *wiphy,
 					struct net_device *dev,
 					u8 key_idx)
 {
+	struct ieee80211_local *local = wiphy_priv(wiphy);
 	struct ieee80211_sub_if_data *sdata;
 
+	if (dev == local->mdev)
+		return -EOPNOTSUPP;
+
 	rcu_read_lock();
 
 	sdata = IEEE80211_DEV_TO_SUB_IF(dev);
@@ -475,9 +497,15 @@ static int ieee80211_config_beacon(struct ieee80211_sub_if_data *sdata,
 static int ieee80211_add_beacon(struct wiphy *wiphy, struct net_device *dev,
 				struct beacon_parameters *params)
 {
-	struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
+	struct ieee80211_local *local = wiphy_priv(wiphy);
+	struct ieee80211_sub_if_data *sdata;
 	struct beacon_data *old;
 
+	if (dev == local->mdev)
+		return -EOPNOTSUPP;
+
+	sdata = IEEE80211_DEV_TO_SUB_IF(dev);
+
 	if (sdata->vif.type != IEEE80211_IF_TYPE_AP)
 		return -EINVAL;
 
@@ -492,9 +520,15 @@ static int ieee80211_add_beacon(struct wiphy *wiphy, struct net_device *dev,
 static int ieee80211_set_beacon(struct wiphy *wiphy, struct net_device *dev,
 				struct beacon_parameters *params)
 {
-	struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
+	struct ieee80211_local *local = wiphy_priv(wiphy);
+	struct ieee80211_sub_if_data *sdata;
 	struct beacon_data *old;
 
+	if (dev == local->mdev)
+		return -EOPNOTSUPP;
+
+	sdata = IEEE80211_DEV_TO_SUB_IF(dev);
+
 	if (sdata->vif.type != IEEE80211_IF_TYPE_AP)
 		return -EINVAL;
 
@@ -508,9 +542,15 @@ static int ieee80211_set_beacon(struct wiphy *wiphy, struct net_device *dev,
 
 static int ieee80211_del_beacon(struct wiphy *wiphy, struct net_device *dev)
 {
-	struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
+	struct ieee80211_local *local = wiphy_priv(wiphy);
+	struct ieee80211_sub_if_data *sdata;
 	struct beacon_data *old;
 
+	if (dev == local->mdev)
+		return -EOPNOTSUPP;
+
+	sdata = IEEE80211_DEV_TO_SUB_IF(dev);
+
 	if (sdata->vif.type != IEEE80211_IF_TYPE_AP)
 		return -EINVAL;
 
@@ -646,11 +686,14 @@ static void sta_apply_parameters(struct ieee80211_local *local,
 static int ieee80211_add_station(struct wiphy *wiphy, struct net_device *dev,
 				 u8 *mac, struct station_parameters *params)
 {
-	struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr);
+	struct ieee80211_local *local = wiphy_priv(wiphy);
 	struct sta_info *sta;
 	struct ieee80211_sub_if_data *sdata;
 	int err;
 
+	if (dev == local->mdev || params->vlan == local->mdev)
+		return -EOPNOTSUPP;
+
 	/* Prevent a race with changing the rate control algorithm */
 	if (!netif_running(dev))
 		return -ENETDOWN;
@@ -701,10 +744,15 @@ static int ieee80211_add_station(struct wiphy *wiphy, struct net_device *dev,
 static int ieee80211_del_station(struct wiphy *wiphy, struct net_device *dev,
 				 u8 *mac)
 {
-	struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
-	struct ieee80211_local *local = sdata->local;
+	struct ieee80211_local *local = wiphy_priv(wiphy);
+	struct ieee80211_sub_if_data *sdata;
 	struct sta_info *sta;
 
+	if (dev == local->mdev)
+		return -EOPNOTSUPP;
+
+	sdata = IEEE80211_DEV_TO_SUB_IF(dev);
+
 	if (mac) {
 		rcu_read_lock();
 
@@ -730,10 +778,13 @@ static int ieee80211_change_station(struct wiphy *wiphy,
 				    u8 *mac,
 				    struct station_parameters *params)
 {
-	struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr);
+	struct ieee80211_local *local = wiphy_priv(wiphy);
 	struct sta_info *sta;
 	struct ieee80211_sub_if_data *vlansdata;
 
+	if (dev == local->mdev || params->vlan == local->mdev)
+		return -EOPNOTSUPP;
+
 	rcu_read_lock();
 
 	/* XXX: get sta belonging to dev */
@@ -752,7 +803,7 @@ static int ieee80211_change_station(struct wiphy *wiphy,
 			return -EINVAL;
 		}
 
-		sta->sdata = IEEE80211_DEV_TO_SUB_IF(params->vlan);
+		sta->sdata = vlansdata;
 		ieee80211_send_layer2_update(sta);
 	}
 
@@ -767,15 +818,20 @@ static int ieee80211_change_station(struct wiphy *wiphy,
 static int ieee80211_add_mpath(struct wiphy *wiphy, struct net_device *dev,
 				 u8 *dst, u8 *next_hop)
 {
-	struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr);
-	struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
+	struct ieee80211_local *local = wiphy_priv(wiphy);
+	struct ieee80211_sub_if_data *sdata;
 	struct mesh_path *mpath;
 	struct sta_info *sta;
 	int err;
 
+	if (dev == local->mdev)
+		return -EOPNOTSUPP;
+
 	if (!netif_running(dev))
 		return -ENETDOWN;
 
+	sdata = IEEE80211_DEV_TO_SUB_IF(dev);
+
 	if (sdata->vif.type != IEEE80211_IF_TYPE_MESH_POINT)
 		return -ENOTSUPP;
 
@@ -817,14 +873,19 @@ static int ieee80211_change_mpath(struct wiphy *wiphy,
 				    struct net_device *dev,
 				    u8 *dst, u8 *next_hop)
 {
-	struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr);
-	struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
+	struct ieee80211_local *local = wiphy_priv(wiphy);
+	struct ieee80211_sub_if_data *sdata;
 	struct mesh_path *mpath;
 	struct sta_info *sta;
 
+	if (dev == local->mdev)
+		return -EOPNOTSUPP;
+
 	if (!netif_running(dev))
 		return -ENETDOWN;
 
+	sdata = IEEE80211_DEV_TO_SUB_IF(dev);
+
 	if (sdata->vif.type != IEEE80211_IF_TYPE_MESH_POINT)
 		return -ENOTSUPP;
 
@@ -891,9 +952,15 @@ static int ieee80211_get_mpath(struct wiphy *wiphy, struct net_device *dev,
 			       u8 *dst, u8 *next_hop, struct mpath_info *pinfo)
 
 {
-	struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
+	struct ieee80211_local *local = wiphy_priv(wiphy);
+	struct ieee80211_sub_if_data *sdata;
 	struct mesh_path *mpath;
 
+	if (dev == local->mdev)
+		return -EOPNOTSUPP;
+
+	sdata = IEEE80211_DEV_TO_SUB_IF(dev);
+
 	if (sdata->vif.type != IEEE80211_IF_TYPE_MESH_POINT)
 		return -ENOTSUPP;
 
@@ -913,9 +980,15 @@ static int ieee80211_dump_mpath(struct wiphy *wiphy, struct net_device *dev,
 				 int idx, u8 *dst, u8 *next_hop,
 				 struct mpath_info *pinfo)
 {
-	struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
+	struct ieee80211_local *local = wiphy_priv(wiphy);
+	struct ieee80211_sub_if_data *sdata;
 	struct mesh_path *mpath;
 
+	if (dev == local->mdev)
+		return -EOPNOTSUPP;
+
+	sdata = IEEE80211_DEV_TO_SUB_IF(dev);
+
 	if (sdata->vif.type != IEEE80211_IF_TYPE_MESH_POINT)
 		return -ENOTSUPP;
 
diff --git a/net/mac80211/debugfs_key.c b/net/mac80211/debugfs_key.c
index 7439b63df5d0..cf82acec913a 100644
--- a/net/mac80211/debugfs_key.c
+++ b/net/mac80211/debugfs_key.c
@@ -265,7 +265,7 @@ void ieee80211_debugfs_key_add_default(struct ieee80211_sub_if_data *sdata)
 	key = sdata->default_key;
 	if (key) {
 		sprintf(buf, "../keys/%d", key->debugfs.cnt);
-		sdata->debugfs.default_key =
+		sdata->common_debugfs.default_key =
 			debugfs_create_symlink("default_key",
 					       sdata->debugfsdir, buf);
 	} else
@@ -277,8 +277,8 @@ void ieee80211_debugfs_key_remove_default(struct ieee80211_sub_if_data *sdata)
 	if (!sdata)
 		return;
 
-	debugfs_remove(sdata->debugfs.default_key);
-	sdata->debugfs.default_key = NULL;
+	debugfs_remove(sdata->common_debugfs.default_key);
+	sdata->common_debugfs.default_key = NULL;
 }
 
 void ieee80211_debugfs_key_sta_del(struct ieee80211_key *key,
diff --git a/net/mac80211/debugfs_netdev.c b/net/mac80211/debugfs_netdev.c
index 475f89a8aee1..8165df578c92 100644
--- a/net/mac80211/debugfs_netdev.c
+++ b/net/mac80211/debugfs_netdev.c
@@ -248,8 +248,8 @@ IEEE80211_IF_WFILE(min_discovery_timeout,
 static void add_sta_files(struct ieee80211_sub_if_data *sdata)
 {
 	DEBUGFS_ADD(drop_unencrypted, sta);
-	DEBUGFS_ADD(force_unicast_rateidx, ap);
-	DEBUGFS_ADD(max_ratectrl_rateidx, ap);
+	DEBUGFS_ADD(force_unicast_rateidx, sta);
+	DEBUGFS_ADD(max_ratectrl_rateidx, sta);
 
 	DEBUGFS_ADD(state, sta);
 	DEBUGFS_ADD(bssid, sta);
@@ -283,8 +283,8 @@ static void add_ap_files(struct ieee80211_sub_if_data *sdata)
 static void add_wds_files(struct ieee80211_sub_if_data *sdata)
 {
 	DEBUGFS_ADD(drop_unencrypted, wds);
-	DEBUGFS_ADD(force_unicast_rateidx, ap);
-	DEBUGFS_ADD(max_ratectrl_rateidx, ap);
+	DEBUGFS_ADD(force_unicast_rateidx, wds);
+	DEBUGFS_ADD(max_ratectrl_rateidx, wds);
 
 	DEBUGFS_ADD(peer, wds);
 }
@@ -292,8 +292,8 @@ static void add_wds_files(struct ieee80211_sub_if_data *sdata)
 static void add_vlan_files(struct ieee80211_sub_if_data *sdata)
 {
 	DEBUGFS_ADD(drop_unencrypted, vlan);
-	DEBUGFS_ADD(force_unicast_rateidx, ap);
-	DEBUGFS_ADD(max_ratectrl_rateidx, ap);
+	DEBUGFS_ADD(force_unicast_rateidx, vlan);
+	DEBUGFS_ADD(max_ratectrl_rateidx, vlan);
 }
 
 static void add_monitor_files(struct ieee80211_sub_if_data *sdata)
@@ -381,8 +381,8 @@ static void add_files(struct ieee80211_sub_if_data *sdata)
 static void del_sta_files(struct ieee80211_sub_if_data *sdata)
 {
 	DEBUGFS_DEL(drop_unencrypted, sta);
-	DEBUGFS_DEL(force_unicast_rateidx, ap);
-	DEBUGFS_DEL(max_ratectrl_rateidx, ap);
+	DEBUGFS_DEL(force_unicast_rateidx, sta);
+	DEBUGFS_DEL(max_ratectrl_rateidx, sta);
 
 	DEBUGFS_DEL(state, sta);
 	DEBUGFS_DEL(bssid, sta);
@@ -416,8 +416,8 @@ static void del_ap_files(struct ieee80211_sub_if_data *sdata)
 static void del_wds_files(struct ieee80211_sub_if_data *sdata)
 {
 	DEBUGFS_DEL(drop_unencrypted, wds);
-	DEBUGFS_DEL(force_unicast_rateidx, ap);
-	DEBUGFS_DEL(max_ratectrl_rateidx, ap);
+	DEBUGFS_DEL(force_unicast_rateidx, wds);
+	DEBUGFS_DEL(max_ratectrl_rateidx, wds);
 
 	DEBUGFS_DEL(peer, wds);
 }
@@ -425,8 +425,8 @@ static void del_wds_files(struct ieee80211_sub_if_data *sdata)
 static void del_vlan_files(struct ieee80211_sub_if_data *sdata)
 {
 	DEBUGFS_DEL(drop_unencrypted, vlan);
-	DEBUGFS_DEL(force_unicast_rateidx, ap);
-	DEBUGFS_DEL(max_ratectrl_rateidx, ap);
+	DEBUGFS_DEL(force_unicast_rateidx, vlan);
+	DEBUGFS_DEL(max_ratectrl_rateidx, vlan);
 }
 
 static void del_monitor_files(struct ieee80211_sub_if_data *sdata)
diff --git a/net/mac80211/ieee80211_i.h b/net/mac80211/ieee80211_i.h
index a4f9a832722a..4498d8713652 100644
--- a/net/mac80211/ieee80211_i.h
+++ b/net/mac80211/ieee80211_i.h
@@ -82,6 +82,7 @@ struct ieee80211_sta_bss {
 
 	u8 bssid[ETH_ALEN];
 	u8 ssid[IEEE80211_MAX_SSID_LEN];
+	u8 dtim_period;
 	u16 capability; /* host byte order */
 	enum ieee80211_band band;
 	int freq;
@@ -469,6 +470,8 @@ struct ieee80211_sub_if_data {
 			struct dentry *auth_transaction;
 			struct dentry *flags;
 			struct dentry *num_beacons_sta;
+			struct dentry *force_unicast_rateidx;
+			struct dentry *max_ratectrl_rateidx;
 		} sta;
 		struct {
 			struct dentry *drop_unencrypted;
@@ -482,15 +485,21 @@ struct ieee80211_sub_if_data {
 		struct {
 			struct dentry *drop_unencrypted;
 			struct dentry *peer;
+			struct dentry *force_unicast_rateidx;
+			struct dentry *max_ratectrl_rateidx;
 		} wds;
 		struct {
 			struct dentry *drop_unencrypted;
+			struct dentry *force_unicast_rateidx;
+			struct dentry *max_ratectrl_rateidx;
 		} vlan;
 		struct {
 			struct dentry *mode;
 		} monitor;
-		struct dentry *default_key;
 	} debugfs;
+	struct {
+		struct dentry *default_key;
+	} common_debugfs;
 
 #ifdef CONFIG_MAC80211_MESH
 	struct dentry *mesh_stats_dir;
@@ -586,6 +595,7 @@ struct ieee80211_local {
 	struct timer_list sta_cleanup;
 
 	unsigned long queues_pending[BITS_TO_LONGS(IEEE80211_MAX_QUEUES)];
+	unsigned long queues_pending_run[BITS_TO_LONGS(IEEE80211_MAX_QUEUES)];
 	struct ieee80211_tx_stored_packet pending_packet[IEEE80211_MAX_QUEUES];
 	struct tasklet_struct tx_pending_tasklet;
 
diff --git a/net/mac80211/main.c b/net/mac80211/main.c
index f1a83d450ea0..aa5a191598c9 100644
--- a/net/mac80211/main.c
+++ b/net/mac80211/main.c
@@ -245,10 +245,13 @@ static int ieee80211_open(struct net_device *dev)
 	case IEEE80211_IF_TYPE_AP:
 		sdata->bss = &sdata->u.ap;
 		break;
+	case IEEE80211_IF_TYPE_MESH_POINT:
+		/* mesh ifaces must set allmulti to forward mcast traffic */
+		atomic_inc(&local->iff_allmultis);
+		break;
 	case IEEE80211_IF_TYPE_STA:
 	case IEEE80211_IF_TYPE_MNTR:
 	case IEEE80211_IF_TYPE_IBSS:
-	case IEEE80211_IF_TYPE_MESH_POINT:
 		/* no special treatment */
 		break;
 	case IEEE80211_IF_TYPE_INVALID:
@@ -495,6 +498,9 @@ static int ieee80211_stop(struct net_device *dev)
 		netif_addr_unlock_bh(local->mdev);
 		break;
 	case IEEE80211_IF_TYPE_MESH_POINT:
+		/* allmulti is always set on mesh ifaces */
+		atomic_dec(&local->iff_allmultis);
+		/* fall through */
 	case IEEE80211_IF_TYPE_STA:
 	case IEEE80211_IF_TYPE_IBSS:
 		sdata->u.sta.state = IEEE80211_DISABLED;
@@ -1233,18 +1239,12 @@ static void ieee80211_tasklet_handler(unsigned long data)
 /* Remove added headers (e.g., QoS control), encryption header/MIC, etc. to
  * make a prepared TX frame (one that has been given to hw) to look like brand
  * new IEEE 802.11 frame that is ready to go through TX processing again.
- * Also, tx_packet_data in cb is restored from tx_control. */
+ */
 static void ieee80211_remove_tx_extra(struct ieee80211_local *local,
 				      struct ieee80211_key *key,
 				      struct sk_buff *skb)
 {
 	int hdrlen, iv_len, mic_len;
-	struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
-
-	info->flags &=	IEEE80211_TX_CTL_REQ_TX_STATUS |
-			IEEE80211_TX_CTL_DO_NOT_ENCRYPT |
-			IEEE80211_TX_CTL_REQUEUE |
-			IEEE80211_TX_CTL_EAPOL_FRAME;
 
 	hdrlen = ieee80211_get_hdrlen_from_skb(skb);
 
@@ -1695,6 +1695,11 @@ int ieee80211_register_hw(struct ieee80211_hw *hw)
 	if (local->hw.conf.beacon_int < 10)
 		local->hw.conf.beacon_int = 100;
 
+	if (local->hw.max_listen_interval == 0)
+		local->hw.max_listen_interval = 1;
+
+	local->hw.conf.listen_interval = local->hw.max_listen_interval;
+
 	local->wstats_flags |= local->hw.flags & (IEEE80211_HW_SIGNAL_UNSPEC |
 						  IEEE80211_HW_SIGNAL_DB |
 						  IEEE80211_HW_SIGNAL_DBM) ?
@@ -1731,8 +1736,8 @@ int ieee80211_register_hw(struct ieee80211_hw *hw)
 	result = ieee80211_wep_init(local);
 
 	if (result < 0) {
-		printk(KERN_DEBUG "%s: Failed to initialize wep\n",
-		       wiphy_name(local->hw.wiphy));
+		printk(KERN_DEBUG "%s: Failed to initialize wep: %d\n",
+		       wiphy_name(local->hw.wiphy), result);
 		goto fail_wep;
 	}
 
diff --git a/net/mac80211/mesh.c b/net/mac80211/mesh.c
index b5933b271491..35f2f95f2fa7 100644
--- a/net/mac80211/mesh.c
+++ b/net/mac80211/mesh.c
@@ -383,7 +383,7 @@ errcopy:
 		hlist_for_each_safe(p, q, &newtbl->hash_buckets[i])
 			tbl->free_node(p, 0);
 	}
-	__mesh_table_free(tbl);
+	__mesh_table_free(newtbl);
 endgrow:
 	return NULL;
 }
diff --git a/net/mac80211/mesh.h b/net/mac80211/mesh.h
index 669eafafe497..7495fbb0d211 100644
--- a/net/mac80211/mesh.h
+++ b/net/mac80211/mesh.h
@@ -214,8 +214,7 @@ void ieee80211s_stop(void);
 void ieee80211_mesh_init_sdata(struct ieee80211_sub_if_data *sdata);
 
 /* Mesh paths */
-int mesh_nexthop_lookup(u8 *next_hop, struct sk_buff *skb,
-		struct net_device *dev);
+int mesh_nexthop_lookup(struct sk_buff *skb, struct net_device *dev);
 void mesh_path_start_discovery(struct net_device *dev);
 struct mesh_path *mesh_path_lookup(u8 *dst, struct net_device *dev);
 struct mesh_path *mesh_path_lookup_by_idx(int idx, struct net_device *dev);
@@ -286,6 +285,4 @@ static inline void mesh_path_activate(struct mesh_path *mpath)
 #define mesh_allocated	0
 #endif
 
-#define MESH_PREQ(skb)	(skb->cb + 30)
-
 #endif /* IEEE80211S_H */
diff --git a/net/mac80211/mesh_hwmp.c b/net/mac80211/mesh_hwmp.c
index 7fa149e230e6..08aca446ca01 100644
--- a/net/mac80211/mesh_hwmp.c
+++ b/net/mac80211/mesh_hwmp.c
@@ -758,29 +758,30 @@ enddiscovery:
 /**
  * ieee80211s_lookup_nexthop - put the appropriate next hop on a mesh frame
  *
- * @next_hop: output argument for next hop address
- * @skb: frame to be sent
+ * @skb: 802.11 frame to be sent
  * @dev: network device the frame will be sent through
+ * @fwd_frame: true if this frame was originally from a different host
  *
  * Returns: 0 if the next hop was found. Nonzero otherwise. If no next hop is
  * found, the function will start a path discovery and queue the frame so it is
  * sent when the path is resolved. This means the caller must not free the skb
  * in this case.
  */
-int mesh_nexthop_lookup(u8 *next_hop, struct sk_buff *skb,
-		struct net_device *dev)
+int mesh_nexthop_lookup(struct sk_buff *skb, struct net_device *dev)
 {
 	struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
 	struct sk_buff *skb_to_free = NULL;
 	struct mesh_path *mpath;
+	struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) skb->data;
+	u8 *dst_addr = hdr->addr3;
 	int err = 0;
 
 	rcu_read_lock();
-	mpath = mesh_path_lookup(skb->data, dev);
+	mpath = mesh_path_lookup(dst_addr, dev);
 
 	if (!mpath) {
-		mesh_path_add(skb->data, dev);
-		mpath = mesh_path_lookup(skb->data, dev);
+		mesh_path_add(dst_addr, dev);
+		mpath = mesh_path_lookup(dst_addr, dev);
 		if (!mpath) {
 			dev_kfree_skb(skb);
 			sdata->u.sta.mshstats.dropped_frames_no_route++;
@@ -792,13 +793,13 @@ int mesh_nexthop_lookup(u8 *next_hop, struct sk_buff *skb,
 	if (mpath->flags & MESH_PATH_ACTIVE) {
 		if (time_after(jiffies, mpath->exp_time -
 			msecs_to_jiffies(sdata->u.sta.mshcfg.path_refresh_time))
-				&& skb->pkt_type != PACKET_OTHERHOST
+				&& !memcmp(dev->dev_addr, hdr->addr4, ETH_ALEN)
 				&& !(mpath->flags & MESH_PATH_RESOLVING)
 				&& !(mpath->flags & MESH_PATH_FIXED)) {
 			mesh_queue_preq(mpath,
 					PREQ_Q_F_START | PREQ_Q_F_REFRESH);
 		}
-		memcpy(next_hop, mpath->next_hop->addr,
+		memcpy(hdr->addr1, mpath->next_hop->addr,
 				ETH_ALEN);
 	} else {
 		if (!(mpath->flags & MESH_PATH_RESOLVING)) {
diff --git a/net/mac80211/mesh_pathtbl.c b/net/mac80211/mesh_pathtbl.c
index 5f88a2e6ee50..838ee60492ad 100644
--- a/net/mac80211/mesh_pathtbl.c
+++ b/net/mac80211/mesh_pathtbl.c
@@ -388,18 +388,15 @@ void mesh_path_tx_pending(struct mesh_path *mpath)
 void mesh_path_discard_frame(struct sk_buff *skb, struct net_device *dev)
 {
 	struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
+	struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) skb->data;
 	struct mesh_path *mpath;
 	u32 dsn = 0;
 
-	if (skb->pkt_type == PACKET_OTHERHOST) {
-		struct ieee80211s_hdr *prev_meshhdr;
-		int mshhdrlen;
+	if (memcmp(hdr->addr4, dev->dev_addr, ETH_ALEN) != 0) {
 		u8 *ra, *da;
 
-		prev_meshhdr = ((struct ieee80211s_hdr *)skb->cb);
-		mshhdrlen = ieee80211_get_mesh_hdrlen(prev_meshhdr);
-		da = skb->data;
-		ra = MESH_PREQ(skb);
+		da = hdr->addr3;
+		ra = hdr->addr2;
 		mpath = mesh_path_lookup(da, dev);
 		if (mpath)
 			dsn = ++mpath->dsn;
diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c
index d7c371e36bf0..9bb68c6a8f44 100644
--- a/net/mac80211/mlme.c
+++ b/net/mac80211/mlme.c
@@ -478,51 +478,21 @@ int ieee80211_ht_addt_info_ie_to_ht_bss_info(
 static void ieee80211_sta_send_associnfo(struct net_device *dev,
 					 struct ieee80211_if_sta *ifsta)
 {
-	char *buf;
-	size_t len;
-	int i;
 	union iwreq_data wrqu;
 
-	if (!ifsta->assocreq_ies && !ifsta->assocresp_ies)
-		return;
-
-	buf = kmalloc(50 + 2 * (ifsta->assocreq_ies_len +
-				ifsta->assocresp_ies_len), GFP_KERNEL);
-	if (!buf)
-		return;
-
-	len = sprintf(buf, "ASSOCINFO(");
 	if (ifsta->assocreq_ies) {
-		len += sprintf(buf + len, "ReqIEs=");
-		for (i = 0; i < ifsta->assocreq_ies_len; i++) {
-			len += sprintf(buf + len, "%02x",
-				       ifsta->assocreq_ies[i]);
-		}
+		memset(&wrqu, 0, sizeof(wrqu));
+		wrqu.data.length = ifsta->assocreq_ies_len;
+		wireless_send_event(dev, IWEVASSOCREQIE, &wrqu,
+				    ifsta->assocreq_ies);
 	}
-	if (ifsta->assocresp_ies) {
-		if (ifsta->assocreq_ies)
-			len += sprintf(buf + len, " ");
-		len += sprintf(buf + len, "RespIEs=");
-		for (i = 0; i < ifsta->assocresp_ies_len; i++) {
-			len += sprintf(buf + len, "%02x",
-				       ifsta->assocresp_ies[i]);
-		}
-	}
-	len += sprintf(buf + len, ")");
 
-	if (len > IW_CUSTOM_MAX) {
-		len = sprintf(buf, "ASSOCRESPIE=");
-		for (i = 0; i < ifsta->assocresp_ies_len; i++) {
-			len += sprintf(buf + len, "%02x",
-				       ifsta->assocresp_ies[i]);
-		}
+	if (ifsta->assocresp_ies) {
+		memset(&wrqu, 0, sizeof(wrqu));
+		wrqu.data.length = ifsta->assocresp_ies_len;
+		wireless_send_event(dev, IWEVASSOCRESPIE, &wrqu,
+				    ifsta->assocresp_ies);
 	}
-
-	memset(&wrqu, 0, sizeof(wrqu));
-	wrqu.data.length = len;
-	wireless_send_event(dev, IWEVCUSTOM, &wrqu, buf);
-
-	kfree(buf);
 }
 
 
@@ -551,6 +521,7 @@ static void ieee80211_set_associated(struct net_device *dev,
 			/* set timing information */
 			sdata->bss_conf.beacon_int = bss->beacon_int;
 			sdata->bss_conf.timestamp = bss->timestamp;
+			sdata->bss_conf.dtim_period = bss->dtim_period;
 
 			changed |= ieee80211_handle_bss_capability(sdata, bss);
 
@@ -606,7 +577,6 @@ void ieee80211_sta_tx(struct net_device *dev, struct sk_buff *skb,
 		      int encrypt)
 {
 	struct ieee80211_sub_if_data *sdata;
-	struct ieee80211_tx_info *info;
 
 	sdata = IEEE80211_DEV_TO_SUB_IF(dev);
 	skb->dev = sdata->local->mdev;
@@ -614,11 +584,8 @@ void ieee80211_sta_tx(struct net_device *dev, struct sk_buff *skb,
 	skb_set_network_header(skb, 0);
 	skb_set_transport_header(skb, 0);
 
-	info = IEEE80211_SKB_CB(skb);
-	memset(info, 0, sizeof(struct ieee80211_tx_info));
-	info->control.ifindex = sdata->dev->ifindex;
-	if (!encrypt)
-		info->flags |= IEEE80211_TX_CTL_DO_NOT_ENCRYPT;
+	skb->iif = sdata->dev->ifindex;
+	skb->do_not_encrypt = !encrypt;
 
 	dev_queue_xmit(skb);
 }
@@ -777,7 +744,8 @@ static void ieee80211_send_assoc(struct net_device *dev,
 		mgmt->frame_control = IEEE80211_FC(IEEE80211_FTYPE_MGMT,
 						   IEEE80211_STYPE_REASSOC_REQ);
 		mgmt->u.reassoc_req.capab_info = cpu_to_le16(capab);
-		mgmt->u.reassoc_req.listen_interval = cpu_to_le16(1);
+		mgmt->u.reassoc_req.listen_interval =
+				cpu_to_le16(local->hw.conf.listen_interval);
 		memcpy(mgmt->u.reassoc_req.current_ap, ifsta->prev_bssid,
 		       ETH_ALEN);
 	} else {
@@ -785,7 +753,8 @@ static void ieee80211_send_assoc(struct net_device *dev,
 		mgmt->frame_control = IEEE80211_FC(IEEE80211_FTYPE_MGMT,
 						   IEEE80211_STYPE_ASSOC_REQ);
 		mgmt->u.assoc_req.capab_info = cpu_to_le16(capab);
-		mgmt->u.assoc_req.listen_interval = cpu_to_le16(1);
+		mgmt->u.reassoc_req.listen_interval =
+				cpu_to_le16(local->hw.conf.listen_interval);
 	}
 
 	/* SSID */
@@ -814,7 +783,7 @@ static void ieee80211_send_assoc(struct net_device *dev,
 		}
 	}
 
-	if (count == 8) {
+	if (rates_len > count) {
 		pos = skb_put(skb, rates_len - count + 2);
 		*pos++ = WLAN_EID_EXT_SUPP_RATES;
 		*pos++ = rates_len - count;
@@ -2104,6 +2073,8 @@ static void ieee80211_rx_mgmt_assoc_resp(struct ieee80211_sub_if_data *sdata,
 			rcu_read_unlock();
 			return;
 		}
+		/* update new sta with its last rx activity */
+		sta->last_rx = jiffies;
 	}
 
 	/*
@@ -2692,6 +2663,16 @@ static void ieee80211_rx_bss_info(struct net_device *dev,
 	bss->beacon_int = le16_to_cpu(mgmt->u.beacon.beacon_int);
 	bss->capability = le16_to_cpu(mgmt->u.beacon.capab_info);
 
+	if (elems->tim) {
+		struct ieee80211_tim_ie *tim_ie =
+			(struct ieee80211_tim_ie *)elems->tim;
+		bss->dtim_period = tim_ie->dtim_period;
+	}
+
+	/* set default value for buggy APs */
+	if (!elems->tim || bss->dtim_period == 0)
+		bss->dtim_period = 1;
+
 	bss->supp_rates_len = 0;
 	if (elems->supp_rates) {
 		clen = IEEE80211_MAX_SUPP_RATES - bss->supp_rates_len;
@@ -2857,7 +2838,7 @@ static void ieee80211_rx_bss_info(struct net_device *dev,
 		       jiffies);
 #endif /* CONFIG_MAC80211_IBSS_DEBUG */
 		if (beacon_timestamp > rx_timestamp) {
-#ifndef CONFIG_MAC80211_IBSS_DEBUG
+#ifdef CONFIG_MAC80211_IBSS_DEBUG
 			printk(KERN_DEBUG "%s: beacon TSF higher than "
 			       "local TSF - IBSS merge with BSSID %s\n",
 			       dev->name, print_mac(mac, mgmt->bssid));
@@ -3303,6 +3284,7 @@ void ieee80211_start_mesh(struct net_device *dev)
 	ifsta = &sdata->u.sta;
 	ifsta->state = IEEE80211_MESH_UP;
 	ieee80211_sta_timer((unsigned long)sdata);
+	ieee80211_if_config(sdata, IEEE80211_IFCC_BEACON);
 }
 #endif
 
@@ -3653,11 +3635,21 @@ static int ieee80211_sta_find_ibss(struct net_device *dev,
 		       "%s\n", print_mac(mac, bssid),
 		       print_mac(mac2, ifsta->bssid));
 #endif /* CONFIG_MAC80211_IBSS_DEBUG */
-	if (found && memcmp(ifsta->bssid, bssid, ETH_ALEN) != 0 &&
-	    (bss = ieee80211_rx_bss_get(dev, bssid,
-					local->hw.conf.channel->center_freq,
-					ifsta->ssid, ifsta->ssid_len))) {
+
+	if (found && memcmp(ifsta->bssid, bssid, ETH_ALEN) != 0) {
 		int ret;
+		int search_freq;
+
+		if (ifsta->flags & IEEE80211_STA_AUTO_CHANNEL_SEL)
+			search_freq = bss->freq;
+		else
+			search_freq = local->hw.conf.channel->center_freq;
+
+		bss = ieee80211_rx_bss_get(dev, bssid, search_freq,
+					   ifsta->ssid, ifsta->ssid_len);
+		if (!bss)
+			goto dont_join;
+
 		printk(KERN_DEBUG "%s: Selected IBSS BSSID %s"
 		       " based on configured SSID\n",
 		       dev->name, print_mac(mac, bssid));
@@ -3665,6 +3657,8 @@ static int ieee80211_sta_find_ibss(struct net_device *dev,
 		ieee80211_rx_bss_put(local, bss);
 		return ret;
 	}
+
+dont_join:
 #ifdef CONFIG_MAC80211_IBSS_DEBUG
 	printk(KERN_DEBUG "   did not try to join ibss\n");
 #endif /* CONFIG_MAC80211_IBSS_DEBUG */
@@ -3898,7 +3892,7 @@ done:
 	if (sdata->vif.type == IEEE80211_IF_TYPE_IBSS) {
 		struct ieee80211_if_sta *ifsta = &sdata->u.sta;
 		if (!(ifsta->flags & IEEE80211_STA_BSSID_SET) ||
-		    (!ifsta->state == IEEE80211_IBSS_JOINED &&
+		    (!(ifsta->state == IEEE80211_IBSS_JOINED) &&
 		    !ieee80211_sta_active_ibss(dev)))
 			ieee80211_sta_find_ibss(dev, ifsta);
 	}
diff --git a/net/mac80211/rx.c b/net/mac80211/rx.c
index 6d9ae67c27ca..6db854505193 100644
--- a/net/mac80211/rx.c
+++ b/net/mac80211/rx.c
@@ -1109,20 +1109,9 @@ ieee80211_data_to_8023(struct ieee80211_rx_data *rx)
 
 	hdrlen = ieee80211_get_hdrlen(fc);
 
-	if (ieee80211_vif_is_mesh(&sdata->vif)) {
-		int meshhdrlen = ieee80211_get_mesh_hdrlen(
+	if (ieee80211_vif_is_mesh(&sdata->vif))
+		hdrlen += ieee80211_get_mesh_hdrlen(
 				(struct ieee80211s_hdr *) (skb->data + hdrlen));
-		/* Copy on cb:
-		 *  - mesh header: to be used for mesh forwarding
-		 * decision. It will also be used as mesh header template at
-		 * tx.c:ieee80211_subif_start_xmit() if interface
-		 * type is mesh and skb->pkt_type == PACKET_OTHERHOST
-		 *  - ta: to be used if a RERR needs to be sent.
-		 */
-		memcpy(skb->cb, skb->data + hdrlen, meshhdrlen);
-		memcpy(MESH_PREQ(skb), hdr->addr2, ETH_ALEN);
-		hdrlen += meshhdrlen;
-	}
 
 	/* convert IEEE 802.11 header + possible LLC headers into Ethernet
 	 * header
@@ -1269,38 +1258,6 @@ ieee80211_deliver_skb(struct ieee80211_rx_data *rx)
 		}
 	}
 
-	/* Mesh forwarding */
-	if (ieee80211_vif_is_mesh(&sdata->vif)) {
-		u8 *mesh_ttl = &((struct ieee80211s_hdr *)skb->cb)->ttl;
-		(*mesh_ttl)--;
-
-		if (is_multicast_ether_addr(skb->data)) {
-			if (*mesh_ttl > 0) {
-				xmit_skb = skb_copy(skb, GFP_ATOMIC);
-				if (xmit_skb)
-					xmit_skb->pkt_type = PACKET_OTHERHOST;
-				else if (net_ratelimit())
-					printk(KERN_DEBUG "%s: failed to clone "
-					       "multicast frame\n", dev->name);
-			} else
-				IEEE80211_IFSTA_MESH_CTR_INC(&sdata->u.sta,
-							     dropped_frames_ttl);
-		} else if (skb->pkt_type != PACKET_OTHERHOST &&
-			compare_ether_addr(dev->dev_addr, skb->data) != 0) {
-			if (*mesh_ttl == 0) {
-				IEEE80211_IFSTA_MESH_CTR_INC(&sdata->u.sta,
-							     dropped_frames_ttl);
-				dev_kfree_skb(skb);
-				skb = NULL;
-			} else {
-				xmit_skb = skb;
-				xmit_skb->pkt_type = PACKET_OTHERHOST;
-				if (!(dev->flags & IFF_PROMISC))
-					skb  = NULL;
-			}
-		}
-	}
-
 	if (skb) {
 		/* deliver to local stack */
 		skb->protocol = eth_type_trans(skb, dev);
@@ -1431,6 +1388,63 @@ ieee80211_rx_h_amsdu(struct ieee80211_rx_data *rx)
 }
 
 static ieee80211_rx_result debug_noinline
+ieee80211_rx_h_mesh_fwding(struct ieee80211_rx_data *rx)
+{
+	struct ieee80211_hdr *hdr;
+	struct ieee80211s_hdr *mesh_hdr;
+	unsigned int hdrlen;
+	struct sk_buff *skb = rx->skb, *fwd_skb;
+
+	hdr = (struct ieee80211_hdr *) skb->data;
+	hdrlen = ieee80211_hdrlen(hdr->frame_control);
+	mesh_hdr = (struct ieee80211s_hdr *) (skb->data + hdrlen);
+
+	if (!ieee80211_is_data(hdr->frame_control))
+		return RX_CONTINUE;
+
+	if (!mesh_hdr->ttl)
+		/* illegal frame */
+		return RX_DROP_MONITOR;
+
+	if (compare_ether_addr(rx->dev->dev_addr, hdr->addr3) == 0)
+		return RX_CONTINUE;
+
+	mesh_hdr->ttl--;
+
+	if (rx->flags & IEEE80211_RX_RA_MATCH) {
+		if (!mesh_hdr->ttl)
+			IEEE80211_IFSTA_MESH_CTR_INC(&rx->sdata->u.sta,
+						     dropped_frames_ttl);
+		else {
+			struct ieee80211_hdr *fwd_hdr;
+			fwd_skb = skb_copy(skb, GFP_ATOMIC);
+
+			if (!fwd_skb && net_ratelimit())
+				printk(KERN_DEBUG "%s: failed to clone mesh frame\n",
+						   rx->dev->name);
+
+			fwd_hdr =  (struct ieee80211_hdr *) fwd_skb->data;
+			/*
+			 * Save TA to addr1 to send TA a path error if a
+			 * suitable next hop is not found
+			 */
+			memcpy(fwd_hdr->addr1, fwd_hdr->addr2, ETH_ALEN);
+			memcpy(fwd_hdr->addr2, rx->dev->dev_addr, ETH_ALEN);
+			fwd_skb->dev = rx->local->mdev;
+			fwd_skb->iif = rx->dev->ifindex;
+			dev_queue_xmit(fwd_skb);
+		}
+	}
+
+	if (is_multicast_ether_addr(hdr->addr3) ||
+	    rx->dev->flags & IFF_PROMISC)
+		return RX_CONTINUE;
+	else
+		return RX_DROP_MONITOR;
+}
+
+
+static ieee80211_rx_result debug_noinline
 ieee80211_rx_h_data(struct ieee80211_rx_data *rx)
 {
 	struct net_device *dev = rx->dev;
@@ -1663,10 +1677,12 @@ static void ieee80211_invoke_rx_handlers(struct ieee80211_sub_if_data *sdata,
 	rx->sdata = sdata;
 	rx->dev = sdata->dev;
 
-#define CALL_RXH(rxh)		\
-	res = rxh(rx);		\
-	if (res != RX_CONTINUE)	\
-		goto rxh_done;
+#define CALL_RXH(rxh)			\
+	do {				\
+		res = rxh(rx);		\
+		if (res != RX_CONTINUE)	\
+			goto rxh_done;  \
+	} while (0);
 
 	CALL_RXH(ieee80211_rx_h_passive_scan)
 	CALL_RXH(ieee80211_rx_h_check)
@@ -1678,6 +1694,8 @@ static void ieee80211_invoke_rx_handlers(struct ieee80211_sub_if_data *sdata,
 	/* must be after MMIC verify so header is counted in MPDU mic */
 	CALL_RXH(ieee80211_rx_h_remove_qos_control)
 	CALL_RXH(ieee80211_rx_h_amsdu)
+	if (ieee80211_vif_is_mesh(&sdata->vif))
+		CALL_RXH(ieee80211_rx_h_mesh_fwding);
 	CALL_RXH(ieee80211_rx_h_data)
 	CALL_RXH(ieee80211_rx_h_ctrl)
 	CALL_RXH(ieee80211_rx_h_mgmt)
diff --git a/net/mac80211/tx.c b/net/mac80211/tx.c
index 0fbadd8b983c..4788f7b91f49 100644
--- a/net/mac80211/tx.c
+++ b/net/mac80211/tx.c
@@ -305,7 +305,7 @@ static void purge_old_ps_buffers(struct ieee80211_local *local)
 	rcu_read_unlock();
 
 	local->total_ps_buffered = total;
-#ifdef MAC80211_VERBOSE_PS_DEBUG
+#ifdef CONFIG_MAC80211_VERBOSE_PS_DEBUG
 	printk(KERN_DEBUG "%s: PS buffers full - purged %d frames\n",
 	       wiphy_name(local->hw.wiphy), purged);
 #endif
@@ -342,7 +342,7 @@ ieee80211_tx_h_multicast_ps_buf(struct ieee80211_tx_data *tx)
 			purge_old_ps_buffers(tx->local);
 		if (skb_queue_len(&tx->sdata->bss->ps_bc_buf) >=
 		    AP_MAX_BC_BUFFER) {
-#ifdef MAC80211_VERBOSE_PS_DEBUG
+#ifdef CONFIG_MAC80211_VERBOSE_PS_DEBUG
 			if (net_ratelimit()) {
 				printk(KERN_DEBUG "%s: BC TX buffer full - "
 				       "dropping the oldest frame\n",
@@ -389,7 +389,7 @@ ieee80211_tx_h_unicast_ps_buf(struct ieee80211_tx_data *tx)
 			purge_old_ps_buffers(tx->local);
 		if (skb_queue_len(&sta->ps_tx_buf) >= STA_MAX_TX_BUFFER) {
 			struct sk_buff *old = skb_dequeue(&sta->ps_tx_buf);
-#ifdef MAC80211_VERBOSE_PS_DEBUG
+#ifdef CONFIG_MAC80211_VERBOSE_PS_DEBUG
 			if (net_ratelimit()) {
 				printk(KERN_DEBUG "%s: STA %s TX "
 				       "buffer full - dropping oldest frame\n",
@@ -439,14 +439,14 @@ ieee80211_tx_h_select_key(struct ieee80211_tx_data *tx)
 	struct ieee80211_tx_info *info = IEEE80211_SKB_CB(tx->skb);
 	u16 fc = tx->fc;
 
-	if (unlikely(info->flags & IEEE80211_TX_CTL_DO_NOT_ENCRYPT))
+	if (unlikely(tx->skb->do_not_encrypt))
 		tx->key = NULL;
 	else if (tx->sta && (key = rcu_dereference(tx->sta->key)))
 		tx->key = key;
 	else if ((key = rcu_dereference(tx->sdata->default_key)))
 		tx->key = key;
 	else if (tx->sdata->drop_unencrypted &&
-		 !(info->flags & IEEE80211_TX_CTL_EAPOL_FRAME) &&
+		 (tx->skb->protocol != cpu_to_be16(ETH_P_PAE)) &&
 		 !(info->flags & IEEE80211_TX_CTL_INJECTED)) {
 		I802_DEBUG_INC(tx->local->tx_handlers_drop_unencrypted);
 		return TX_DROP;
@@ -476,7 +476,7 @@ ieee80211_tx_h_select_key(struct ieee80211_tx_data *tx)
 	}
 
 	if (!tx->key || !(tx->key->flags & KEY_FLAG_UPLOADED_TO_HARDWARE))
-		info->flags |= IEEE80211_TX_CTL_DO_NOT_ENCRYPT;
+		tx->skb->do_not_encrypt = 1;
 
 	return TX_CONTINUE;
 }
@@ -732,6 +732,7 @@ ieee80211_tx_h_fragment(struct ieee80211_tx_data *tx)
 		memcpy(skb_put(frag, copylen), pos, copylen);
 		memcpy(frag->cb, first->cb, sizeof(frag->cb));
 		skb_copy_queue_mapping(frag, first);
+		frag->do_not_encrypt = first->do_not_encrypt;
 
 		pos += copylen;
 		left -= copylen;
@@ -852,7 +853,7 @@ __ieee80211_parse_tx_radiotap(struct ieee80211_tx_data *tx,
 
 	sband = tx->local->hw.wiphy->bands[tx->channel->band];
 
-	info->flags |= IEEE80211_TX_CTL_DO_NOT_ENCRYPT;
+	skb->do_not_encrypt = 1;
 	info->flags |= IEEE80211_TX_CTL_INJECTED;
 	tx->flags &= ~IEEE80211_TX_FRAGMENTED;
 
@@ -925,8 +926,7 @@ __ieee80211_parse_tx_radiotap(struct ieee80211_tx_data *tx,
 				skb_trim(skb, skb->len - FCS_LEN);
 			}
 			if (*iterator.this_arg & IEEE80211_RADIOTAP_F_WEP)
-				info->flags &=
-					~IEEE80211_TX_CTL_DO_NOT_ENCRYPT;
+				tx->skb->do_not_encrypt = 0;
 			if (*iterator.this_arg & IEEE80211_RADIOTAP_F_FRAG)
 				tx->flags |= IEEE80211_TX_FRAGMENTED;
 			break;
@@ -1042,10 +1042,9 @@ static int ieee80211_tx_prepare(struct ieee80211_tx_data *tx,
 				struct sk_buff *skb,
 				struct net_device *mdev)
 {
-	struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
 	struct net_device *dev;
 
-	dev = dev_get_by_index(&init_net, info->control.ifindex);
+	dev = dev_get_by_index(&init_net, skb->iif);
 	if (unlikely(dev && !is_ieee80211_device(dev, mdev))) {
 		dev_put(dev);
 		dev = NULL;
@@ -1061,13 +1060,14 @@ static int ieee80211_tx_prepare(struct ieee80211_tx_data *tx,
 static int __ieee80211_tx(struct ieee80211_local *local, struct sk_buff *skb,
 			  struct ieee80211_tx_data *tx)
 {
-	struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
+	struct ieee80211_tx_info *info;
 	int ret, i;
 
-	if (netif_subqueue_stopped(local->mdev, skb))
-		return IEEE80211_TX_AGAIN;
-
 	if (skb) {
+		if (netif_subqueue_stopped(local->mdev, skb))
+			return IEEE80211_TX_AGAIN;
+		info =  IEEE80211_SKB_CB(skb);
+
 		ieee80211_dump_frame(wiphy_name(local->hw.wiphy),
 				     "TX to low-level driver", skb);
 		ret = local->ops->tx(local_to_hw(local), skb);
@@ -1216,6 +1216,7 @@ retry:
 
 		if (ret == IEEE80211_TX_FRAG_AGAIN)
 			skb = NULL;
+
 		set_bit(queue, local->queues_pending);
 		smp_mb();
 		/*
@@ -1300,14 +1301,15 @@ int ieee80211_master_start_xmit(struct sk_buff *skb,
 				struct net_device *dev)
 {
 	struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
+	struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) skb->data;
 	struct net_device *odev = NULL;
 	struct ieee80211_sub_if_data *osdata;
 	int headroom;
 	bool may_encrypt;
 	int ret;
 
-	if (info->control.ifindex)
-		odev = dev_get_by_index(&init_net, info->control.ifindex);
+	if (skb->iif)
+		odev = dev_get_by_index(&init_net, skb->iif);
 	if (unlikely(odev && !is_ieee80211_device(odev, dev))) {
 		dev_put(odev);
 		odev = NULL;
@@ -1321,9 +1323,27 @@ int ieee80211_master_start_xmit(struct sk_buff *skb,
 		return 0;
 	}
 
+	memset(info, 0, sizeof(*info));
+
+	info->flags |= IEEE80211_TX_CTL_REQ_TX_STATUS;
+
 	osdata = IEEE80211_DEV_TO_SUB_IF(odev);
 
-	may_encrypt = !(info->flags & IEEE80211_TX_CTL_DO_NOT_ENCRYPT);
+	if (ieee80211_vif_is_mesh(&osdata->vif) &&
+	    ieee80211_is_data(hdr->frame_control)) {
+		if (ieee80211_is_data(hdr->frame_control)) {
+			if (is_multicast_ether_addr(hdr->addr3))
+				memcpy(hdr->addr1, hdr->addr3, ETH_ALEN);
+			else
+				if (mesh_nexthop_lookup(skb, odev))
+					return  0;
+			if (memcmp(odev->dev_addr, hdr->addr4, ETH_ALEN) != 0)
+				IEEE80211_IFSTA_MESH_CTR_INC(&osdata->u.sta,
+							     fwded_frames);
+		}
+	}
+
+	may_encrypt = !skb->do_not_encrypt;
 
 	headroom = osdata->local->tx_headroom;
 	if (may_encrypt)
@@ -1348,7 +1368,6 @@ int ieee80211_monitor_start_xmit(struct sk_buff *skb,
 				 struct net_device *dev)
 {
 	struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr);
-	struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
 	struct ieee80211_radiotap_header *prthdr =
 		(struct ieee80211_radiotap_header *)skb->data;
 	u16 len_rthdr;
@@ -1371,11 +1390,11 @@ int ieee80211_monitor_start_xmit(struct sk_buff *skb,
 	skb->dev = local->mdev;
 
 	/* needed because we set skb device to master */
-	info->control.ifindex = dev->ifindex;
+	skb->iif = dev->ifindex;
 
-	info->flags |= IEEE80211_TX_CTL_DO_NOT_ENCRYPT;
-	/* Interfaces should always request a status report */
-	info->flags |= IEEE80211_TX_CTL_REQ_TX_STATUS;
+	/* sometimes we do encrypt injected frames, will be fixed
+	 * up in radiotap parser if not wanted */
+	skb->do_not_encrypt = 0;
 
 	/*
 	 * fix up the pointers accounting for the radiotap
@@ -1419,7 +1438,6 @@ int ieee80211_subif_start_xmit(struct sk_buff *skb,
 			       struct net_device *dev)
 {
 	struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr);
-	struct ieee80211_tx_info *info;
 	struct ieee80211_sub_if_data *sdata;
 	int ret = 1, head_need;
 	u16 ethertype, hdrlen,  meshhdrlen = 0;
@@ -1469,30 +1487,17 @@ int ieee80211_subif_start_xmit(struct sk_buff *skb,
 	case IEEE80211_IF_TYPE_MESH_POINT:
 		fc |= cpu_to_le16(IEEE80211_FCTL_FROMDS | IEEE80211_FCTL_TODS);
 		/* RA TA DA SA */
-		if (is_multicast_ether_addr(skb->data))
-			memcpy(hdr.addr1, skb->data, ETH_ALEN);
-		else if (mesh_nexthop_lookup(hdr.addr1, skb, dev))
-				return 0;
+		memset(hdr.addr1, 0, ETH_ALEN);
 		memcpy(hdr.addr2, dev->dev_addr, ETH_ALEN);
 		memcpy(hdr.addr3, skb->data, ETH_ALEN);
 		memcpy(hdr.addr4, skb->data + ETH_ALEN, ETH_ALEN);
-		if (skb->pkt_type == PACKET_OTHERHOST) {
-			/* Forwarded frame, keep mesh ttl and seqnum */
-			struct ieee80211s_hdr *prev_meshhdr;
-			prev_meshhdr = ((struct ieee80211s_hdr *)skb->cb);
-			meshhdrlen = ieee80211_get_mesh_hdrlen(prev_meshhdr);
-			memcpy(&mesh_hdr, prev_meshhdr, meshhdrlen);
-			sdata->u.sta.mshstats.fwded_frames++;
-		} else {
-			if (!sdata->u.sta.mshcfg.dot11MeshTTL) {
-				/* Do not send frames with mesh_ttl == 0 */
-				sdata->u.sta.mshstats.dropped_frames_ttl++;
-				ret = 0;
-				goto fail;
-			}
-			meshhdrlen = ieee80211_new_mesh_header(&mesh_hdr,
-							       sdata);
+		if (!sdata->u.sta.mshcfg.dot11MeshTTL) {
+			/* Do not send frames with mesh_ttl == 0 */
+			sdata->u.sta.mshstats.dropped_frames_ttl++;
+			ret = 0;
+			goto fail;
 		}
+		meshhdrlen = ieee80211_new_mesh_header(&mesh_hdr, sdata);
 		hdrlen = 30;
 		break;
 #endif
@@ -1540,7 +1545,8 @@ int ieee80211_subif_start_xmit(struct sk_buff *skb,
 	 * Drop unicast frames to unauthorised stations unless they are
 	 * EAPOL frames from the local station.
 	 */
-	if (unlikely(!is_multicast_ether_addr(hdr.addr1) &&
+	if (!ieee80211_vif_is_mesh(&sdata->vif) &&
+		unlikely(!is_multicast_ether_addr(hdr.addr1) &&
 		      !(sta_flags & WLAN_STA_AUTHORIZED) &&
 		      !(ethertype == ETH_P_PAE &&
 		       compare_ether_addr(dev->dev_addr,
@@ -1645,14 +1651,7 @@ int ieee80211_subif_start_xmit(struct sk_buff *skb,
 	nh_pos += hdrlen;
 	h_pos += hdrlen;
 
-	info = IEEE80211_SKB_CB(skb);
-	memset(info, 0, sizeof(*info));
-	info->control.ifindex = dev->ifindex;
-	if (ethertype == ETH_P_PAE)
-		info->flags |= IEEE80211_TX_CTL_EAPOL_FRAME;
-
-	/* Interfaces should always request a status report */
-	info->flags |= IEEE80211_TX_CTL_REQ_TX_STATUS;
+	skb->iif = dev->ifindex;
 
 	skb->dev = local->mdev;
 	dev->stats.tx_packets++;
@@ -1714,14 +1713,19 @@ void ieee80211_tx_pending(unsigned long data)
 	netif_tx_lock_bh(dev);
 	for (i = 0; i < ieee80211_num_regular_queues(&local->hw); i++) {
 		/* Check that this queue is ok */
-		if (__netif_subqueue_stopped(local->mdev, i))
+		if (__netif_subqueue_stopped(local->mdev, i) &&
+		    !test_bit(i, local->queues_pending_run))
 			continue;
 
 		if (!test_bit(i, local->queues_pending)) {
+			clear_bit(i, local->queues_pending_run);
 			ieee80211_wake_queue(&local->hw, i);
 			continue;
 		}
 
+		clear_bit(i, local->queues_pending_run);
+		netif_start_subqueue(local->mdev, i);
+
 		store = &local->pending_packet[i];
 		tx.extra_frag = store->extra_frag;
 		tx.num_extra_frag = store->num_extra_frag;
@@ -1922,6 +1926,8 @@ struct sk_buff *ieee80211_beacon_get(struct ieee80211_hw *hw,
 
 	info = IEEE80211_SKB_CB(skb);
 
+	skb->do_not_encrypt = 1;
+
 	info->band = band;
 	rate_control_get_rate(local->mdev, sband, skb, &rsel);
 
@@ -1931,7 +1937,7 @@ struct sk_buff *ieee80211_beacon_get(struct ieee80211_hw *hw,
 			       "no rate found\n",
 			       wiphy_name(local->hw.wiphy));
 		}
-		dev_kfree_skb(skb);
+		dev_kfree_skb_any(skb);
 		skb = NULL;
 		goto out;
 	}
@@ -1940,7 +1946,6 @@ struct sk_buff *ieee80211_beacon_get(struct ieee80211_hw *hw,
 	info->tx_rate_idx = rsel.rate_idx;
 
 	info->flags |= IEEE80211_TX_CTL_NO_ACK;
-	info->flags |= IEEE80211_TX_CTL_DO_NOT_ENCRYPT;
 	info->flags |= IEEE80211_TX_CTL_CLEAR_PS_FILT;
 	info->flags |= IEEE80211_TX_CTL_ASSIGN_SEQ;
 	if (sdata->bss_conf.use_short_preamble &&
diff --git a/net/mac80211/util.c b/net/mac80211/util.c
index 19f85e1b3695..0d463c80c404 100644
--- a/net/mac80211/util.c
+++ b/net/mac80211/util.c
@@ -361,6 +361,7 @@ void ieee80211_wake_queue(struct ieee80211_hw *hw, int queue)
 	struct ieee80211_local *local = hw_to_local(hw);
 
 	if (test_bit(queue, local->queues_pending)) {
+		set_bit(queue, local->queues_pending_run);
 		tasklet_schedule(&local->tx_pending_tasklet);
 	} else {
 		netif_wake_subqueue(local->mdev, queue);
diff --git a/net/mac80211/wep.c b/net/mac80211/wep.c
index 872d2fcd1a5b..5c2bf0a3d4db 100644
--- a/net/mac80211/wep.c
+++ b/net/mac80211/wep.c
@@ -31,13 +31,13 @@ int ieee80211_wep_init(struct ieee80211_local *local)
 	local->wep_tx_tfm = crypto_alloc_blkcipher("ecb(arc4)", 0,
 						CRYPTO_ALG_ASYNC);
 	if (IS_ERR(local->wep_tx_tfm))
-		return -ENOMEM;
+		return PTR_ERR(local->wep_tx_tfm);
 
 	local->wep_rx_tfm = crypto_alloc_blkcipher("ecb(arc4)", 0,
 						CRYPTO_ALG_ASYNC);
 	if (IS_ERR(local->wep_rx_tfm)) {
 		crypto_free_blkcipher(local->wep_tx_tfm);
-		return -ENOMEM;
+		return PTR_ERR(local->wep_rx_tfm);
 	}
 
 	return 0;
diff --git a/net/mac80211/wme.c b/net/mac80211/wme.c
index 07edda0b8a5c..4310e2f65661 100644
--- a/net/mac80211/wme.c
+++ b/net/mac80211/wme.c
@@ -188,6 +188,9 @@ int ieee80211_ht_agg_queue_add(struct ieee80211_local *local,
 {
 	int i;
 
+	/* XXX: currently broken due to cb/requeue use */
+	return -EPERM;
+
 	/* prepare the filter and save it for the SW queue
 	 * matching the received HW queue */
 
@@ -238,12 +241,14 @@ void ieee80211_ht_agg_queue_remove(struct ieee80211_local *local,
 	} else {
 		struct netdev_queue *txq;
 		spinlock_t *root_lock;
+		struct Qdisc *q;
 
 		txq = netdev_get_tx_queue(local->mdev, agg_queue);
-		root_lock = qdisc_root_lock(txq->qdisc);
+		q = rcu_dereference(txq->qdisc);
+		root_lock = qdisc_lock(q);
 
 		spin_lock_bh(root_lock);
-		qdisc_reset(txq->qdisc);
+		qdisc_reset(q);
 		spin_unlock_bh(root_lock);
 	}
 }
diff --git a/net/netfilter/nf_conntrack_core.c b/net/netfilter/nf_conntrack_core.c
index c519d090bdb9..9d1830da8e84 100644
--- a/net/netfilter/nf_conntrack_core.c
+++ b/net/netfilter/nf_conntrack_core.c
@@ -1032,10 +1032,10 @@ void nf_conntrack_cleanup(void)
 	nf_ct_free_hashtable(nf_conntrack_hash, nf_conntrack_vmalloc,
 			     nf_conntrack_htable_size);
 
-	nf_conntrack_proto_fini();
-	nf_conntrack_helper_fini();
-	nf_conntrack_expect_fini();
 	nf_conntrack_acct_fini();
+	nf_conntrack_expect_fini();
+	nf_conntrack_helper_fini();
+	nf_conntrack_proto_fini();
 }
 
 struct hlist_head *nf_ct_alloc_hashtable(unsigned int *sizep, int *vmalloced)
diff --git a/net/netfilter/nf_conntrack_extend.c b/net/netfilter/nf_conntrack_extend.c
index 3469bc71a385..4b2c769d555f 100644
--- a/net/netfilter/nf_conntrack_extend.c
+++ b/net/netfilter/nf_conntrack_extend.c
@@ -95,7 +95,7 @@ void *__nf_ct_ext_add(struct nf_conn *ct, enum nf_ct_ext_id id, gfp_t gfp)
 	newlen = newoff + t->len;
 	rcu_read_unlock();
 
-	new = krealloc(ct->ext, newlen, gfp);
+	new = __krealloc(ct->ext, newlen, gfp);
 	if (!new)
 		return NULL;
 
@@ -115,10 +115,10 @@ void *__nf_ct_ext_add(struct nf_conn *ct, enum nf_ct_ext_id id, gfp_t gfp)
 		ct->ext = new;
 	}
 
-	ct->ext->offset[id] = newoff;
-	ct->ext->len = newlen;
-	memset((void *)ct->ext + newoff, 0, newlen - newoff);
-	return (void *)ct->ext + newoff;
+	new->offset[id] = newoff;
+	new->len = newlen;
+	memset((void *)new + newoff, 0, newlen - newoff);
+	return (void *)new + newoff;
 }
 EXPORT_SYMBOL(__nf_ct_ext_add);
 
diff --git a/net/netfilter/nf_conntrack_netlink.c b/net/netfilter/nf_conntrack_netlink.c
index 105a616c5c78..a8752031adcb 100644
--- a/net/netfilter/nf_conntrack_netlink.c
+++ b/net/netfilter/nf_conntrack_netlink.c
@@ -968,7 +968,7 @@ ctnetlink_change_helper(struct nf_conn *ct, struct nlattr *cda[])
 		/* need to zero data of old helper */
 		memset(&help->help, 0, sizeof(help->help));
 	} else {
-		help = nf_ct_helper_ext_add(ct, GFP_KERNEL);
+		help = nf_ct_helper_ext_add(ct, GFP_ATOMIC);
 		if (help == NULL)
 			return -ENOMEM;
 	}
@@ -1136,16 +1136,33 @@ ctnetlink_create_conntrack(struct nlattr *cda[],
 	ct->timeout.expires = jiffies + ct->timeout.expires * HZ;
 	ct->status |= IPS_CONFIRMED;
 
+	rcu_read_lock();
+	helper = __nf_ct_helper_find(rtuple);
+	if (helper) {
+		help = nf_ct_helper_ext_add(ct, GFP_ATOMIC);
+		if (help == NULL) {
+			rcu_read_unlock();
+			err = -ENOMEM;
+			goto err;
+		}
+		/* not in hash table yet so not strictly necessary */
+		rcu_assign_pointer(help->helper, helper);
+	}
+
 	if (cda[CTA_STATUS]) {
 		err = ctnetlink_change_status(ct, cda);
-		if (err < 0)
+		if (err < 0) {
+			rcu_read_unlock();
 			goto err;
+		}
 	}
 
 	if (cda[CTA_PROTOINFO]) {
 		err = ctnetlink_change_protoinfo(ct, cda);
-		if (err < 0)
+		if (err < 0) {
+			rcu_read_unlock();
 			goto err;
+		}
 	}
 
 	nf_ct_acct_ext_add(ct, GFP_KERNEL);
@@ -1155,19 +1172,6 @@ ctnetlink_create_conntrack(struct nlattr *cda[],
 		ct->mark = ntohl(nla_get_be32(cda[CTA_MARK]));
 #endif
 
-	rcu_read_lock();
-	helper = __nf_ct_helper_find(rtuple);
-	if (helper) {
-		help = nf_ct_helper_ext_add(ct, GFP_KERNEL);
-		if (help == NULL) {
-			rcu_read_unlock();
-			err = -ENOMEM;
-			goto err;
-		}
-		/* not in hash table yet so not strictly necessary */
-		rcu_assign_pointer(help->helper, helper);
-	}
-
 	/* setup master conntrack: this is a confirmed expectation */
 	if (master_ct) {
 		__set_bit(IPS_EXPECTED_BIT, &ct->status);
diff --git a/net/netfilter/nf_conntrack_proto_tcp.c b/net/netfilter/nf_conntrack_proto_tcp.c
index 420a10d8eb1e..6f61261888ef 100644
--- a/net/netfilter/nf_conntrack_proto_tcp.c
+++ b/net/netfilter/nf_conntrack_proto_tcp.c
@@ -67,7 +67,8 @@ static const char *const tcp_conntrack_names[] = {
 /* RFC1122 says the R2 limit should be at least 100 seconds.
    Linux uses 15 packets as limit, which corresponds
    to ~13-30min depending on RTO. */
-static unsigned int nf_ct_tcp_timeout_max_retrans __read_mostly =   5 MINS;
+static unsigned int nf_ct_tcp_timeout_max_retrans __read_mostly    =   5 MINS;
+static unsigned int nf_ct_tcp_timeout_unacknowledged __read_mostly =   5 MINS;
 
 static unsigned int tcp_timeouts[TCP_CONNTRACK_MAX] __read_mostly = {
 	[TCP_CONNTRACK_SYN_SENT]	= 2 MINS,
@@ -625,8 +626,10 @@ static bool tcp_in_window(const struct nf_conn *ct,
 		swin = win + (sack - ack);
 		if (sender->td_maxwin < swin)
 			sender->td_maxwin = swin;
-		if (after(end, sender->td_end))
+		if (after(end, sender->td_end)) {
 			sender->td_end = end;
+			sender->flags |= IP_CT_TCP_FLAG_DATA_UNACKNOWLEDGED;
+		}
 		/*
 		 * Update receiver data.
 		 */
@@ -637,6 +640,8 @@ static bool tcp_in_window(const struct nf_conn *ct,
 			if (win == 0)
 				receiver->td_maxend++;
 		}
+		if (ack == receiver->td_end)
+			receiver->flags &= ~IP_CT_TCP_FLAG_DATA_UNACKNOWLEDGED;
 
 		/*
 		 * Check retransmissions.
@@ -951,9 +956,16 @@ static int tcp_packet(struct nf_conn *ct,
 	if (old_state != new_state
 	    && new_state == TCP_CONNTRACK_FIN_WAIT)
 		ct->proto.tcp.seen[dir].flags |= IP_CT_TCP_FLAG_CLOSE_INIT;
-	timeout = ct->proto.tcp.retrans >= nf_ct_tcp_max_retrans
-		  && tcp_timeouts[new_state] > nf_ct_tcp_timeout_max_retrans
-		  ? nf_ct_tcp_timeout_max_retrans : tcp_timeouts[new_state];
+
+	if (ct->proto.tcp.retrans >= nf_ct_tcp_max_retrans &&
+	    tcp_timeouts[new_state] > nf_ct_tcp_timeout_max_retrans)
+		timeout = nf_ct_tcp_timeout_max_retrans;
+	else if ((ct->proto.tcp.seen[0].flags | ct->proto.tcp.seen[1].flags) &
+		 IP_CT_TCP_FLAG_DATA_UNACKNOWLEDGED &&
+		 tcp_timeouts[new_state] > nf_ct_tcp_timeout_unacknowledged)
+		timeout = nf_ct_tcp_timeout_unacknowledged;
+	else
+		timeout = tcp_timeouts[new_state];
 	write_unlock_bh(&tcp_lock);
 
 	nf_conntrack_event_cache(IPCT_PROTOINFO_VOLATILE, skb);
@@ -1236,6 +1248,13 @@ static struct ctl_table tcp_sysctl_table[] = {
 		.proc_handler	= &proc_dointvec_jiffies,
 	},
 	{
+		.procname	= "nf_conntrack_tcp_timeout_unacknowledged",
+		.data		= &nf_ct_tcp_timeout_unacknowledged,
+		.maxlen		= sizeof(unsigned int),
+		.mode		= 0644,
+		.proc_handler	= &proc_dointvec_jiffies,
+	},
+	{
 		.ctl_name	= NET_NF_CONNTRACK_TCP_LOOSE,
 		.procname	= "nf_conntrack_tcp_loose",
 		.data		= &nf_ct_tcp_loose,
diff --git a/net/netfilter/nf_conntrack_standalone.c b/net/netfilter/nf_conntrack_standalone.c
index 869ef9349d0f..8509db14670b 100644
--- a/net/netfilter/nf_conntrack_standalone.c
+++ b/net/netfilter/nf_conntrack_standalone.c
@@ -324,6 +324,7 @@ static int log_invalid_proto_min = 0;
 static int log_invalid_proto_max = 255;
 
 static struct ctl_table_header *nf_ct_sysctl_header;
+static struct ctl_table_header *nf_ct_netfilter_header;
 
 static ctl_table nf_ct_sysctl_table[] = {
 	{
@@ -384,12 +385,6 @@ static ctl_table nf_ct_sysctl_table[] = {
 
 static ctl_table nf_ct_netfilter_table[] = {
 	{
-		.ctl_name	= NET_NETFILTER,
-		.procname	= "netfilter",
-		.mode		= 0555,
-		.child		= nf_ct_sysctl_table,
-	},
-	{
 		.ctl_name	= NET_NF_CONNTRACK_MAX,
 		.procname	= "nf_conntrack_max",
 		.data		= &nf_conntrack_max,
@@ -409,18 +404,29 @@ EXPORT_SYMBOL_GPL(nf_ct_log_invalid);
 
 static int nf_conntrack_standalone_init_sysctl(void)
 {
-	nf_ct_sysctl_header =
+	nf_ct_netfilter_header =
 		register_sysctl_paths(nf_ct_path, nf_ct_netfilter_table);
-	if (nf_ct_sysctl_header == NULL) {
-		printk("nf_conntrack: can't register to sysctl.\n");
-		return -ENOMEM;
-	}
+	if (!nf_ct_netfilter_header)
+		goto out;
+
+	nf_ct_sysctl_header =
+		 register_sysctl_paths(nf_net_netfilter_sysctl_path,
+					nf_ct_sysctl_table);
+	if (!nf_ct_sysctl_header)
+		goto out_unregister_netfilter;
+
 	return 0;
 
+out_unregister_netfilter:
+	unregister_sysctl_table(nf_ct_netfilter_header);
+out:
+	printk("nf_conntrack: can't register to sysctl.\n");
+	return -ENOMEM;
 }
 
 static void nf_conntrack_standalone_fini_sysctl(void)
 {
+	unregister_sysctl_table(nf_ct_netfilter_header);
 	unregister_sysctl_table(nf_ct_sysctl_header);
 }
 #else
diff --git a/net/netfilter/xt_hashlimit.c b/net/netfilter/xt_hashlimit.c
index 6809af542a2c..d9418a267812 100644
--- a/net/netfilter/xt_hashlimit.c
+++ b/net/netfilter/xt_hashlimit.c
@@ -367,9 +367,7 @@ static void htable_gc(unsigned long htlong)
 
 static void htable_destroy(struct xt_hashlimit_htable *hinfo)
 {
-	/* remove timer, if it is pending */
-	if (timer_pending(&hinfo->timer))
-		del_timer(&hinfo->timer);
+	del_timer_sync(&hinfo->timer);
 
 	/* remove proc entry */
 	remove_proc_entry(hinfo->pde->name,
diff --git a/net/netlink/af_netlink.c b/net/netlink/af_netlink.c
index 98bfe277eab2..b0eacc0007cc 100644
--- a/net/netlink/af_netlink.c
+++ b/net/netlink/af_netlink.c
@@ -158,9 +158,10 @@ static void netlink_sock_destruct(struct sock *sk)
 		printk(KERN_ERR "Freeing alive netlink socket %p\n", sk);
 		return;
 	}
-	BUG_TRAP(!atomic_read(&sk->sk_rmem_alloc));
-	BUG_TRAP(!atomic_read(&sk->sk_wmem_alloc));
-	BUG_TRAP(!nlk_sk(sk)->groups);
+
+	WARN_ON(atomic_read(&sk->sk_rmem_alloc));
+	WARN_ON(atomic_read(&sk->sk_wmem_alloc));
+	WARN_ON(nlk_sk(sk)->groups);
 }
 
 /* This lock without WQ_FLAG_EXCLUSIVE is good on UP and it is _very_ bad on
diff --git a/net/packet/af_packet.c b/net/packet/af_packet.c
index d56cae112dc8..c718e7e3f7de 100644
--- a/net/packet/af_packet.c
+++ b/net/packet/af_packet.c
@@ -260,8 +260,8 @@ static inline struct packet_sock *pkt_sk(struct sock *sk)
 
 static void packet_sock_destruct(struct sock *sk)
 {
-	BUG_TRAP(!atomic_read(&sk->sk_rmem_alloc));
-	BUG_TRAP(!atomic_read(&sk->sk_wmem_alloc));
+	WARN_ON(atomic_read(&sk->sk_rmem_alloc));
+	WARN_ON(atomic_read(&sk->sk_wmem_alloc));
 
 	if (!sock_flag(sk, SOCK_DEAD)) {
 		printk("Attempt to release alive packet socket: %p\n", sk);
diff --git a/net/rfkill/rfkill-input.c b/net/rfkill/rfkill-input.c
index 8aa822730145..e5b69556bb5b 100644
--- a/net/rfkill/rfkill-input.c
+++ b/net/rfkill/rfkill-input.c
@@ -109,6 +109,25 @@ static DEFINE_RFKILL_TASK(rfkill_uwb, RFKILL_TYPE_UWB);
 static DEFINE_RFKILL_TASK(rfkill_wimax, RFKILL_TYPE_WIMAX);
 static DEFINE_RFKILL_TASK(rfkill_wwan, RFKILL_TYPE_WWAN);
 
+static void rfkill_schedule_evsw_rfkillall(int state)
+{
+	/* EVERY radio type. state != 0 means radios ON */
+	/* handle EPO (emergency power off) through shortcut */
+	if (state) {
+		rfkill_schedule_set(&rfkill_wwan,
+				    RFKILL_STATE_UNBLOCKED);
+		rfkill_schedule_set(&rfkill_wimax,
+				    RFKILL_STATE_UNBLOCKED);
+		rfkill_schedule_set(&rfkill_uwb,
+				    RFKILL_STATE_UNBLOCKED);
+		rfkill_schedule_set(&rfkill_bt,
+				    RFKILL_STATE_UNBLOCKED);
+		rfkill_schedule_set(&rfkill_wlan,
+				    RFKILL_STATE_UNBLOCKED);
+	} else
+		rfkill_schedule_epo();
+}
+
 static void rfkill_event(struct input_handle *handle, unsigned int type,
 			unsigned int code, int data)
 {
@@ -132,21 +151,7 @@ static void rfkill_event(struct input_handle *handle, unsigned int type,
 	} else if (type == EV_SW) {
 		switch (code) {
 		case SW_RFKILL_ALL:
-			/* EVERY radio type. data != 0 means radios ON */
-			/* handle EPO (emergency power off) through shortcut */
-			if (data) {
-				rfkill_schedule_set(&rfkill_wwan,
-						    RFKILL_STATE_UNBLOCKED);
-				rfkill_schedule_set(&rfkill_wimax,
-						    RFKILL_STATE_UNBLOCKED);
-				rfkill_schedule_set(&rfkill_uwb,
-						    RFKILL_STATE_UNBLOCKED);
-				rfkill_schedule_set(&rfkill_bt,
-						    RFKILL_STATE_UNBLOCKED);
-				rfkill_schedule_set(&rfkill_wlan,
-						    RFKILL_STATE_UNBLOCKED);
-			} else
-				rfkill_schedule_epo();
+			rfkill_schedule_evsw_rfkillall(data);
 			break;
 		default:
 			break;
@@ -168,6 +173,7 @@ static int rfkill_connect(struct input_handler *handler, struct input_dev *dev,
 	handle->handler = handler;
 	handle->name = "rfkill";
 
+	/* causes rfkill_start() to be called */
 	error = input_register_handle(handle);
 	if (error)
 		goto err_free_handle;
@@ -185,6 +191,23 @@ static int rfkill_connect(struct input_handler *handler, struct input_dev *dev,
 	return error;
 }
 
+static void rfkill_start(struct input_handle *handle)
+{
+	/* Take event_lock to guard against configuration changes, we
+	 * should be able to deal with concurrency with rfkill_event()
+	 * just fine (which event_lock will also avoid). */
+	spin_lock_irq(&handle->dev->event_lock);
+
+	if (test_bit(EV_SW, handle->dev->evbit)) {
+		if (test_bit(SW_RFKILL_ALL, handle->dev->swbit))
+			rfkill_schedule_evsw_rfkillall(test_bit(SW_RFKILL_ALL,
+							handle->dev->sw));
+		/* add resync for further EV_SW events here */
+	}
+
+	spin_unlock_irq(&handle->dev->event_lock);
+}
+
 static void rfkill_disconnect(struct input_handle *handle)
 {
 	input_close_device(handle);
@@ -225,6 +248,7 @@ static struct input_handler rfkill_handler = {
 	.event =	rfkill_event,
 	.connect =	rfkill_connect,
 	.disconnect =	rfkill_disconnect,
+	.start =	rfkill_start,
 	.name =		"rfkill",
 	.id_table =	rfkill_ids,
 };
diff --git a/net/rfkill/rfkill.c b/net/rfkill/rfkill.c
index 7a560b785097..74aecc098bad 100644
--- a/net/rfkill/rfkill.c
+++ b/net/rfkill/rfkill.c
@@ -105,6 +105,16 @@ static void rfkill_led_trigger(struct rfkill *rfkill,
 #endif /* CONFIG_RFKILL_LEDS */
 }
 
+#ifdef CONFIG_RFKILL_LEDS
+static void rfkill_led_trigger_activate(struct led_classdev *led)
+{
+	struct rfkill *rfkill = container_of(led->trigger,
+			struct rfkill, led_trigger);
+
+	rfkill_led_trigger(rfkill, rfkill->state);
+}
+#endif /* CONFIG_RFKILL_LEDS */
+
 static void notify_rfkill_state_change(struct rfkill *rfkill)
 {
 	blocking_notifier_call_chain(&rfkill_notifier_list,
@@ -130,7 +140,6 @@ static void update_rfkill_state(struct rfkill *rfkill)
 
 /**
  * rfkill_toggle_radio - wrapper for toggle_radio hook
- *
  * @rfkill: the rfkill struct to use
  * @force: calls toggle_radio even if cache says it is not needed,
  *	and also makes sure notifications of the state will be
@@ -141,8 +150,10 @@ static void update_rfkill_state(struct rfkill *rfkill)
  * calls and handling all the red tape such as issuing notifications
  * if the call is successful.
  *
- * Note that @force cannot override a (possibly cached) state of
- * RFKILL_STATE_HARD_BLOCKED.  Any device making use of
+ * Suspended devices are not touched at all, and -EAGAIN is returned.
+ *
+ * Note that the @force parameter cannot override a (possibly cached)
+ * state of RFKILL_STATE_HARD_BLOCKED.  Any device making use of
  * RFKILL_STATE_HARD_BLOCKED implements either get_state() or
  * rfkill_force_state(), so the cache either is bypassed or valid.
  *
@@ -150,7 +161,7 @@ static void update_rfkill_state(struct rfkill *rfkill)
  * even if the radio is in RFKILL_STATE_HARD_BLOCKED state, so as to
  * give the driver a hint that it should double-BLOCK the transmitter.
  *
- * Caller must have aquired rfkill_mutex.
+ * Caller must have acquired rfkill->mutex.
  */
 static int rfkill_toggle_radio(struct rfkill *rfkill,
 				enum rfkill_state state,
@@ -159,6 +170,9 @@ static int rfkill_toggle_radio(struct rfkill *rfkill,
 	int retval = 0;
 	enum rfkill_state oldstate, newstate;
 
+	if (unlikely(rfkill->dev.power.power_state.event & PM_EVENT_SLEEP))
+		return -EBUSY;
+
 	oldstate = rfkill->state;
 
 	if (rfkill->get_state && !force &&
@@ -200,12 +214,12 @@ static int rfkill_toggle_radio(struct rfkill *rfkill,
 
 /**
  * rfkill_switch_all - Toggle state of all switches of given type
- * @type: type of interfaces to be affeceted
+ * @type: type of interfaces to be affected
  * @state: the new state
  *
- * This function toggles state of all switches of given type unless
- * a specific switch is claimed by userspace in which case it is
- * left alone.
+ * This function toggles the state of all switches of given type,
+ * unless a specific switch is claimed by userspace (in which case,
+ * that switch is left alone) or suspended.
  */
 void rfkill_switch_all(enum rfkill_type type, enum rfkill_state state)
 {
@@ -216,8 +230,11 @@ void rfkill_switch_all(enum rfkill_type type, enum rfkill_state state)
 	rfkill_states[type] = state;
 
 	list_for_each_entry(rfkill, &rfkill_list, node) {
-		if ((!rfkill->user_claim) && (rfkill->type == type))
+		if ((!rfkill->user_claim) && (rfkill->type == type)) {
+			mutex_lock(&rfkill->mutex);
 			rfkill_toggle_radio(rfkill, state, 0);
+			mutex_unlock(&rfkill->mutex);
+		}
 	}
 
 	mutex_unlock(&rfkill_mutex);
@@ -227,8 +244,8 @@ EXPORT_SYMBOL(rfkill_switch_all);
 /**
  * rfkill_epo - emergency power off all transmitters
  *
- * This kicks all rfkill devices to RFKILL_STATE_SOFT_BLOCKED, ignoring
- * everything in its path but rfkill_mutex.
+ * This kicks all non-suspended rfkill devices to RFKILL_STATE_SOFT_BLOCKED,
+ * ignoring everything in its path but rfkill_mutex and rfkill->mutex.
  */
 void rfkill_epo(void)
 {
@@ -236,7 +253,9 @@ void rfkill_epo(void)
 
 	mutex_lock(&rfkill_mutex);
 	list_for_each_entry(rfkill, &rfkill_list, node) {
+		mutex_lock(&rfkill->mutex);
 		rfkill_toggle_radio(rfkill, RFKILL_STATE_SOFT_BLOCKED, 1);
+		mutex_unlock(&rfkill->mutex);
 	}
 	mutex_unlock(&rfkill_mutex);
 }
@@ -252,7 +271,12 @@ EXPORT_SYMBOL_GPL(rfkill_epo);
  * a notification by the firmware/hardware of the current *real*
  * state of the radio rfkill switch.
  *
- * It may not be called from an atomic context.
+ * Devices which are subject to external changes on their rfkill
+ * state (such as those caused by a hardware rfkill line) MUST
+ * have their driver arrange to call rfkill_force_state() as soon
+ * as possible after such a change.
+ *
+ * This function may not be called from an atomic context.
  */
 int rfkill_force_state(struct rfkill *rfkill, enum rfkill_state state)
 {
@@ -353,7 +377,7 @@ static ssize_t rfkill_claim_show(struct device *dev,
 {
 	struct rfkill *rfkill = to_rfkill(dev);
 
-	return sprintf(buf, "%d", rfkill->user_claim);
+	return sprintf(buf, "%d\n", rfkill->user_claim);
 }
 
 static ssize_t rfkill_claim_store(struct device *dev,
@@ -367,6 +391,9 @@ static ssize_t rfkill_claim_store(struct device *dev,
 	if (!capable(CAP_NET_ADMIN))
 		return -EPERM;
 
+	if (rfkill->user_claim_unsupported)
+		return -EOPNOTSUPP;
+
 	/*
 	 * Take the global lock to make sure the kernel is not in
 	 * the middle of rfkill_switch_all
@@ -375,19 +402,17 @@ static ssize_t rfkill_claim_store(struct device *dev,
 	if (error)
 		return error;
 
-	if (rfkill->user_claim_unsupported) {
-		error = -EOPNOTSUPP;
-		goto out_unlock;
-	}
 	if (rfkill->user_claim != claim) {
-		if (!claim)
+		if (!claim) {
+			mutex_lock(&rfkill->mutex);
 			rfkill_toggle_radio(rfkill,
 					    rfkill_states[rfkill->type],
 					    0);
+			mutex_unlock(&rfkill->mutex);
+		}
 		rfkill->user_claim = claim;
 	}
 
-out_unlock:
 	mutex_unlock(&rfkill_mutex);
 
 	return error ? error : count;
@@ -438,13 +463,14 @@ static int rfkill_resume(struct device *dev)
 	if (dev->power.power_state.event != PM_EVENT_ON) {
 		mutex_lock(&rfkill->mutex);
 
+		dev->power.power_state.event = PM_EVENT_ON;
+
 		/* restore radio state AND notify everybody */
 		rfkill_toggle_radio(rfkill, rfkill->state, 1);
 
 		mutex_unlock(&rfkill->mutex);
 	}
 
-	dev->power.power_state = PMSG_ON;
 	return 0;
 }
 #else
@@ -516,8 +542,11 @@ static void rfkill_remove_switch(struct rfkill *rfkill)
 {
 	mutex_lock(&rfkill_mutex);
 	list_del_init(&rfkill->node);
-	rfkill_toggle_radio(rfkill, RFKILL_STATE_SOFT_BLOCKED, 1);
 	mutex_unlock(&rfkill_mutex);
+
+	mutex_lock(&rfkill->mutex);
+	rfkill_toggle_radio(rfkill, RFKILL_STATE_SOFT_BLOCKED, 1);
+	mutex_unlock(&rfkill->mutex);
 }
 
 /**
@@ -526,9 +555,10 @@ static void rfkill_remove_switch(struct rfkill *rfkill)
  * @type: type of the switch (RFKILL_TYPE_*)
  *
  * This function should be called by the network driver when it needs
- * rfkill structure. Once the structure is allocated the driver shoud
- * finish its initialization by setting name, private data, enable_radio
+ * rfkill structure.  Once the structure is allocated the driver should
+ * finish its initialization by setting the name, private data, enable_radio
  * and disable_radio methods and then register it with rfkill_register().
+ *
  * NOTE: If registration fails the structure shoudl be freed by calling
  * rfkill_free() otherwise rfkill_unregister() should be used.
  */
@@ -560,7 +590,7 @@ EXPORT_SYMBOL(rfkill_allocate);
  * rfkill_free - Mark rfkill structure for deletion
  * @rfkill: rfkill structure to be destroyed
  *
- * Decrements reference count of rfkill structure so it is destroyed.
+ * Decrements reference count of the rfkill structure so it is destroyed.
  * Note that rfkill_free() should _not_ be called after rfkill_unregister().
  */
 void rfkill_free(struct rfkill *rfkill)
@@ -575,7 +605,10 @@ static void rfkill_led_trigger_register(struct rfkill *rfkill)
 #ifdef CONFIG_RFKILL_LEDS
 	int error;
 
-	rfkill->led_trigger.name = rfkill->dev.bus_id;
+	if (!rfkill->led_trigger.name)
+		rfkill->led_trigger.name = rfkill->dev.bus_id;
+	if (!rfkill->led_trigger.activate)
+		rfkill->led_trigger.activate = rfkill_led_trigger_activate;
 	error = led_trigger_register(&rfkill->led_trigger);
 	if (error)
 		rfkill->led_trigger.name = NULL;
@@ -585,8 +618,10 @@ static void rfkill_led_trigger_register(struct rfkill *rfkill)
 static void rfkill_led_trigger_unregister(struct rfkill *rfkill)
 {
 #ifdef CONFIG_RFKILL_LEDS
-	if (rfkill->led_trigger.name)
+	if (rfkill->led_trigger.name) {
 		led_trigger_unregister(&rfkill->led_trigger);
+		rfkill->led_trigger.name = NULL;
+	}
 #endif
 }
 
@@ -622,8 +657,8 @@ int rfkill_register(struct rfkill *rfkill)
 
 	error = device_add(dev);
 	if (error) {
-		rfkill_led_trigger_unregister(rfkill);
 		rfkill_remove_switch(rfkill);
+		rfkill_led_trigger_unregister(rfkill);
 		return error;
 	}
 
diff --git a/net/rxrpc/af_rxrpc.c b/net/rxrpc/af_rxrpc.c
index 4b2682feeedc..32e489118beb 100644
--- a/net/rxrpc/af_rxrpc.c
+++ b/net/rxrpc/af_rxrpc.c
@@ -660,9 +660,9 @@ static void rxrpc_sock_destructor(struct sock *sk)
 
 	rxrpc_purge_queue(&sk->sk_receive_queue);
 
-	BUG_TRAP(!atomic_read(&sk->sk_wmem_alloc));
-	BUG_TRAP(sk_unhashed(sk));
-	BUG_TRAP(!sk->sk_socket);
+	WARN_ON(atomic_read(&sk->sk_wmem_alloc));
+	WARN_ON(!sk_unhashed(sk));
+	WARN_ON(sk->sk_socket);
 
 	if (!sock_flag(sk, SOCK_DEAD)) {
 		printk("Attempt to release alive rxrpc socket: %p\n", sk);
diff --git a/net/rxrpc/ar-accept.c b/net/rxrpc/ar-accept.c
index bdfb77417794..77228f28fa36 100644
--- a/net/rxrpc/ar-accept.c
+++ b/net/rxrpc/ar-accept.c
@@ -100,7 +100,7 @@ static int rxrpc_accept_incoming_call(struct rxrpc_local *local,
 
 	trans = rxrpc_get_transport(local, peer, GFP_NOIO);
 	rxrpc_put_peer(peer);
-	if (!trans) {
+	if (IS_ERR(trans)) {
 		_debug("no trans");
 		ret = -EBUSY;
 		goto error;
diff --git a/net/sched/act_api.c b/net/sched/act_api.c
index 74e662cbb2c5..9974b3f04f05 100644
--- a/net/sched/act_api.c
+++ b/net/sched/act_api.c
@@ -41,7 +41,7 @@ void tcf_hash_destroy(struct tcf_common *p, struct tcf_hashinfo *hinfo)
 			return;
 		}
 	}
-	BUG_TRAP(0);
+	WARN_ON(1);
 }
 EXPORT_SYMBOL(tcf_hash_destroy);
 
@@ -205,10 +205,9 @@ struct tcf_common *tcf_hash_check(u32 index, struct tc_action *a, int bind,
 {
 	struct tcf_common *p = NULL;
 	if (index && (p = tcf_hash_lookup(index, hinfo)) != NULL) {
-		if (bind) {
+		if (bind)
 			p->tcfc_bindcnt++;
-			p->tcfc_refcnt++;
-		}
+		p->tcfc_refcnt++;
 		a->priv = p;
 	}
 	return p;
@@ -752,7 +751,7 @@ static int tca_action_flush(struct nlattr *nla, struct nlmsghdr *n, u32 pid)
 	struct nlattr *tb[TCA_ACT_MAX+1];
 	struct nlattr *kind;
 	struct tc_action *a = create_a(0);
-	int err = -EINVAL;
+	int err = -ENOMEM;
 
 	if (a == NULL) {
 		printk("tca_action_flush: couldnt create tc_action\n");
@@ -763,7 +762,7 @@ static int tca_action_flush(struct nlattr *nla, struct nlmsghdr *n, u32 pid)
 	if (!skb) {
 		printk("tca_action_flush: failed skb alloc\n");
 		kfree(a);
-		return -ENOBUFS;
+		return err;
 	}
 
 	b = skb_tail_pointer(skb);
@@ -791,6 +790,8 @@ static int tca_action_flush(struct nlattr *nla, struct nlmsghdr *n, u32 pid)
 	err = a->ops->walk(skb, &dcb, RTM_DELACTION, a);
 	if (err < 0)
 		goto nla_put_failure;
+	if (err == 0)
+		goto noflush_out;
 
 	nla_nest_end(skb, nest);
 
@@ -808,6 +809,7 @@ nla_put_failure:
 nlmsg_failure:
 	module_put(a->ops->owner);
 err_out:
+noflush_out:
 	kfree_skb(skb);
 	kfree(a);
 	return err;
@@ -825,8 +827,10 @@ tca_action_gd(struct nlattr *nla, struct nlmsghdr *n, u32 pid, int event)
 		return ret;
 
 	if (event == RTM_DELACTION && n->nlmsg_flags&NLM_F_ROOT) {
-		if (tb[0] != NULL && tb[1] == NULL)
-			return tca_action_flush(tb[0], n, pid);
+		if (tb[1] != NULL)
+			return tca_action_flush(tb[1], n, pid);
+		else
+			return -EINVAL;
 	}
 
 	for (i = 1; i <= TCA_ACT_MAX_PRIO && tb[i]; i++) {
diff --git a/net/sched/act_police.c b/net/sched/act_police.c
index 32c3f9d9fb7a..38015b493947 100644
--- a/net/sched/act_police.c
+++ b/net/sched/act_police.c
@@ -116,7 +116,7 @@ static void tcf_police_destroy(struct tcf_police *p)
 			return;
 		}
 	}
-	BUG_TRAP(0);
+	WARN_ON(1);
 }
 
 static const struct nla_policy police_policy[TCA_POLICE_MAX + 1] = {
diff --git a/net/sched/cls_api.c b/net/sched/cls_api.c
index d2b6f54a6261..8eb79e92e94c 100644
--- a/net/sched/cls_api.c
+++ b/net/sched/cls_api.c
@@ -205,7 +205,7 @@ replay:
 		}
 	}
 
-	root_lock = qdisc_root_lock(q);
+	root_lock = qdisc_root_sleeping_lock(q);
 
 	if (tp == NULL) {
 		/* Proto-tcf does not exist, create new one */
@@ -280,7 +280,7 @@ replay:
 		if (n->nlmsg_type == RTM_DELTFILTER && t->tcm_handle == 0) {
 			spin_lock_bh(root_lock);
 			*back = tp->next;
-			spin_lock_bh(root_lock);
+			spin_unlock_bh(root_lock);
 
 			tfilter_notify(skb, n, tp, fh, RTM_DELTFILTER);
 			tcf_destroy(tp);
diff --git a/net/sched/cls_route.c b/net/sched/cls_route.c
index 481260a4f10f..e3d8455eebc2 100644
--- a/net/sched/cls_route.c
+++ b/net/sched/cls_route.c
@@ -75,7 +75,7 @@ static __inline__ int route4_fastmap_hash(u32 id, int iif)
 static inline
 void route4_reset_fastmap(struct Qdisc *q, struct route4_head *head, u32 id)
 {
-	spinlock_t *root_lock = qdisc_root_lock(q);
+	spinlock_t *root_lock = qdisc_root_sleeping_lock(q);
 
 	spin_lock_bh(root_lock);
 	memset(head->fastmap, 0, sizeof(head->fastmap));
diff --git a/net/sched/cls_u32.c b/net/sched/cls_u32.c
index 527db2559dd2..246f9065ce34 100644
--- a/net/sched/cls_u32.c
+++ b/net/sched/cls_u32.c
@@ -345,7 +345,7 @@ static int u32_delete_key(struct tcf_proto *tp, struct tc_u_knode* key)
 			}
 		}
 	}
-	BUG_TRAP(0);
+	WARN_ON(1);
 	return 0;
 }
 
@@ -368,7 +368,7 @@ static int u32_destroy_hnode(struct tcf_proto *tp, struct tc_u_hnode *ht)
 	struct tc_u_common *tp_c = tp->data;
 	struct tc_u_hnode **hn;
 
-	BUG_TRAP(!ht->refcnt);
+	WARN_ON(ht->refcnt);
 
 	u32_clear_hnode(tp, ht);
 
@@ -380,7 +380,7 @@ static int u32_destroy_hnode(struct tcf_proto *tp, struct tc_u_hnode *ht)
 		}
 	}
 
-	BUG_TRAP(0);
+	WARN_ON(1);
 	return -ENOENT;
 }
 
@@ -389,7 +389,7 @@ static void u32_destroy(struct tcf_proto *tp)
 	struct tc_u_common *tp_c = tp->data;
 	struct tc_u_hnode *root_ht = xchg(&tp->root, NULL);
 
-	BUG_TRAP(root_ht != NULL);
+	WARN_ON(root_ht == NULL);
 
 	if (root_ht && --root_ht->refcnt == 0)
 		u32_destroy_hnode(tp, root_ht);
@@ -407,7 +407,7 @@ static void u32_destroy(struct tcf_proto *tp)
 		while ((ht = tp_c->hlist) != NULL) {
 			tp_c->hlist = ht->next;
 
-			BUG_TRAP(ht->refcnt == 0);
+			WARN_ON(ht->refcnt != 0);
 
 			kfree(ht);
 		}
diff --git a/net/sched/sch_api.c b/net/sched/sch_api.c
index b0601642e227..1122c952aa99 100644
--- a/net/sched/sch_api.c
+++ b/net/sched/sch_api.c
@@ -27,6 +27,7 @@
 #include <linux/kmod.h>
 #include <linux/list.h>
 #include <linux/hrtimer.h>
+#include <linux/lockdep.h>
 
 #include <net/net_namespace.h>
 #include <net/sock.h>
@@ -183,24 +184,68 @@ EXPORT_SYMBOL(unregister_qdisc);
    (root qdisc, all its children, children of children etc.)
  */
 
+struct Qdisc *qdisc_match_from_root(struct Qdisc *root, u32 handle)
+{
+	struct Qdisc *q;
+
+	if (!(root->flags & TCQ_F_BUILTIN) &&
+	    root->handle == handle)
+		return root;
+
+	list_for_each_entry(q, &root->list, list) {
+		if (q->handle == handle)
+			return q;
+	}
+	return NULL;
+}
+
+/*
+ * This lock is needed until some qdiscs stop calling qdisc_tree_decrease_qlen()
+ * without rtnl_lock(); currently hfsc_dequeue(), netem_dequeue(), tbf_dequeue()
+ */
+static DEFINE_SPINLOCK(qdisc_list_lock);
+
+static void qdisc_list_add(struct Qdisc *q)
+{
+	if ((q->parent != TC_H_ROOT) && !(q->flags & TCQ_F_INGRESS)) {
+		spin_lock_bh(&qdisc_list_lock);
+		list_add_tail(&q->list, &qdisc_root_sleeping(q)->list);
+		spin_unlock_bh(&qdisc_list_lock);
+	}
+}
+
+void qdisc_list_del(struct Qdisc *q)
+{
+	if ((q->parent != TC_H_ROOT) && !(q->flags & TCQ_F_INGRESS)) {
+		spin_lock_bh(&qdisc_list_lock);
+		list_del(&q->list);
+		spin_unlock_bh(&qdisc_list_lock);
+	}
+}
+EXPORT_SYMBOL(qdisc_list_del);
+
 struct Qdisc *qdisc_lookup(struct net_device *dev, u32 handle)
 {
 	unsigned int i;
+	struct Qdisc *q;
+
+	spin_lock_bh(&qdisc_list_lock);
 
 	for (i = 0; i < dev->num_tx_queues; i++) {
 		struct netdev_queue *txq = netdev_get_tx_queue(dev, i);
-		struct Qdisc *q, *txq_root = txq->qdisc;
-
-		if (!(txq_root->flags & TCQ_F_BUILTIN) &&
-		    txq_root->handle == handle)
-			return txq_root;
+		struct Qdisc *txq_root = txq->qdisc_sleeping;
 
-		list_for_each_entry(q, &txq_root->list, list) {
-			if (q->handle == handle)
-				return q;
-		}
+		q = qdisc_match_from_root(txq_root, handle);
+		if (q)
+			goto unlock;
 	}
-	return NULL;
+
+	q = qdisc_match_from_root(dev->rx_queue.qdisc_sleeping, handle);
+
+unlock:
+	spin_unlock_bh(&qdisc_list_lock);
+
+	return q;
 }
 
 static struct Qdisc *qdisc_leaf(struct Qdisc *p, u32 classid)
@@ -416,7 +461,7 @@ static enum hrtimer_restart qdisc_watchdog(struct hrtimer *timer)
 
 	wd->qdisc->flags &= ~TCQ_F_THROTTLED;
 	smp_wmb();
-	__netif_schedule(wd->qdisc);
+	__netif_schedule(qdisc_root(wd->qdisc));
 
 	return HRTIMER_NORESTART;
 }
@@ -433,6 +478,10 @@ void qdisc_watchdog_schedule(struct qdisc_watchdog *wd, psched_time_t expires)
 {
 	ktime_t time;
 
+	if (test_bit(__QDISC_STATE_DEACTIVATED,
+		     &qdisc_root_sleeping(wd->qdisc)->state))
+		return;
+
 	wd->qdisc->flags |= TCQ_F_THROTTLED;
 	time = ktime_set(0, 0);
 	time = ktime_add_ns(time, PSCHED_US2NS(expires));
@@ -572,44 +621,21 @@ static u32 qdisc_alloc_handle(struct net_device *dev)
 static struct Qdisc *dev_graft_qdisc(struct netdev_queue *dev_queue,
 				     struct Qdisc *qdisc)
 {
+	struct Qdisc *oqdisc = dev_queue->qdisc_sleeping;
 	spinlock_t *root_lock;
-	struct Qdisc *oqdisc;
-	int ingress;
-
-	ingress = 0;
-	if (qdisc && qdisc->flags&TCQ_F_INGRESS)
-		ingress = 1;
 
-	if (ingress) {
-		oqdisc = dev_queue->qdisc;
-	} else {
-		oqdisc = dev_queue->qdisc_sleeping;
-	}
-
-	root_lock = qdisc_root_lock(oqdisc);
+	root_lock = qdisc_lock(oqdisc);
 	spin_lock_bh(root_lock);
 
-	if (ingress) {
-		/* Prune old scheduler */
-		if (oqdisc && atomic_read(&oqdisc->refcnt) <= 1) {
-			/* delete */
-			qdisc_reset(oqdisc);
-			dev_queue->qdisc = NULL;
-		} else {  /* new */
-			dev_queue->qdisc = qdisc;
-		}
+	/* Prune old scheduler */
+	if (oqdisc && atomic_read(&oqdisc->refcnt) <= 1)
+		qdisc_reset(oqdisc);
 
-	} else {
-		/* Prune old scheduler */
-		if (oqdisc && atomic_read(&oqdisc->refcnt) <= 1)
-			qdisc_reset(oqdisc);
-
-		/* ... and graft new one */
-		if (qdisc == NULL)
-			qdisc = &noop_qdisc;
-		dev_queue->qdisc_sleeping = qdisc;
-		dev_queue->qdisc = &noop_qdisc;
-	}
+	/* ... and graft new one */
+	if (qdisc == NULL)
+		qdisc = &noop_qdisc;
+	dev_queue->qdisc_sleeping = qdisc;
+	rcu_assign_pointer(dev_queue->qdisc, &noop_qdisc);
 
 	spin_unlock_bh(root_lock);
 
@@ -650,11 +676,8 @@ static void notify_and_destroy(struct sk_buff *skb, struct nlmsghdr *n, u32 clid
 	if (new || old)
 		qdisc_notify(skb, n, clid, old, new);
 
-	if (old) {
-		spin_lock_bh(&old->q.lock);
+	if (old)
 		qdisc_destroy(old);
-		spin_unlock_bh(&old->q.lock);
-	}
 }
 
 /* Graft qdisc "new" to class "classid" of qdisc "parent" or
@@ -678,7 +701,8 @@ static int qdisc_graft(struct net_device *dev, struct Qdisc *parent,
 
 		ingress = 0;
 		num_q = dev->num_tx_queues;
-		if (q && q->flags & TCQ_F_INGRESS) {
+		if ((q && q->flags & TCQ_F_INGRESS) ||
+		    (new && new->flags & TCQ_F_INGRESS)) {
 			num_q = 1;
 			ingress = 1;
 		}
@@ -692,13 +716,10 @@ static int qdisc_graft(struct net_device *dev, struct Qdisc *parent,
 			if (!ingress)
 				dev_queue = netdev_get_tx_queue(dev, i);
 
-			if (ingress) {
-				old = dev_graft_qdisc(dev_queue, q);
-			} else {
-				old = dev_graft_qdisc(dev_queue, new);
-				if (new && i > 0)
-					atomic_inc(&new->refcnt);
-			}
+			old = dev_graft_qdisc(dev_queue, new);
+			if (new && i > 0)
+				atomic_inc(&new->refcnt);
+
 			notify_and_destroy(skb, n, classid, old, new);
 		}
 
@@ -722,6 +743,10 @@ static int qdisc_graft(struct net_device *dev, struct Qdisc *parent,
 	return err;
 }
 
+/* lockdep annotation is needed for ingress; egress gets it only for name */
+static struct lock_class_key qdisc_tx_lock;
+static struct lock_class_key qdisc_rx_lock;
+
 /*
    Allocate and initialize new qdisc.
 
@@ -782,6 +807,7 @@ qdisc_create(struct net_device *dev, struct netdev_queue *dev_queue,
 	if (handle == TC_H_INGRESS) {
 		sch->flags |= TCQ_F_INGRESS;
 		handle = TC_H_MAKE(TC_H_INGRESS, 0);
+		lockdep_set_class(qdisc_lock(sch), &qdisc_rx_lock);
 	} else {
 		if (handle == 0) {
 			handle = qdisc_alloc_handle(dev);
@@ -789,6 +815,7 @@ qdisc_create(struct net_device *dev, struct netdev_queue *dev_queue,
 			if (handle == 0)
 				goto err_out3;
 		}
+		lockdep_set_class(qdisc_lock(sch), &qdisc_tx_lock);
 	}
 
 	sch->handle = handle;
@@ -803,9 +830,16 @@ qdisc_create(struct net_device *dev, struct netdev_queue *dev_queue,
 			sch->stab = stab;
 		}
 		if (tca[TCA_RATE]) {
+			spinlock_t *root_lock;
+
+			if ((sch->parent != TC_H_ROOT) &&
+			    !(sch->flags & TCQ_F_INGRESS))
+				root_lock = qdisc_root_sleeping_lock(sch);
+			else
+				root_lock = qdisc_lock(sch);
+
 			err = gen_new_estimator(&sch->bstats, &sch->rate_est,
-						qdisc_root_lock(sch),
-						tca[TCA_RATE]);
+						root_lock, tca[TCA_RATE]);
 			if (err) {
 				/*
 				 * Any broken qdiscs that would require
@@ -817,8 +851,8 @@ qdisc_create(struct net_device *dev, struct netdev_queue *dev_queue,
 				goto err_out3;
 			}
 		}
-		if (parent)
-			list_add_tail(&sch->list, &dev_queue->qdisc->list);
+
+		qdisc_list_add(sch);
 
 		return sch;
 	}
@@ -857,7 +891,8 @@ static int qdisc_change(struct Qdisc *sch, struct nlattr **tca)
 
 	if (tca[TCA_RATE])
 		gen_replace_estimator(&sch->bstats, &sch->rate_est,
-				      qdisc_root_lock(sch), tca[TCA_RATE]);
+				      qdisc_root_sleeping_lock(sch),
+				      tca[TCA_RATE]);
 	return 0;
 }
 
@@ -933,7 +968,7 @@ static int tc_get_qdisc(struct sk_buff *skb, struct nlmsghdr *n, void *arg)
 					return -ENOENT;
 				q = qdisc_leaf(p, clid);
 			} else { /* ingress */
-				q = dev->rx_queue.qdisc;
+				q = dev->rx_queue.qdisc_sleeping;
 			}
 		} else {
 			struct netdev_queue *dev_queue;
@@ -1003,7 +1038,7 @@ replay:
 					return -ENOENT;
 				q = qdisc_leaf(p, clid);
 			} else { /*ingress */
-				q = dev->rx_queue.qdisc;
+				q = dev->rx_queue.qdisc_sleeping;
 			}
 		} else {
 			struct netdev_queue *dev_queue;
@@ -1099,20 +1134,13 @@ create_n_graft:
 	}
 
 graft:
-	if (1) {
-		spinlock_t *root_lock;
-
-		err = qdisc_graft(dev, p, skb, n, clid, q, NULL);
-		if (err) {
-			if (q) {
-				root_lock = qdisc_root_lock(q);
-				spin_lock_bh(root_lock);
-				qdisc_destroy(q);
-				spin_unlock_bh(root_lock);
-			}
-			return err;
-		}
+	err = qdisc_graft(dev, p, skb, n, clid, q, NULL);
+	if (err) {
+		if (q)
+			qdisc_destroy(q);
+		return err;
 	}
+
 	return 0;
 }
 
@@ -1141,8 +1169,8 @@ static int tc_fill_qdisc(struct sk_buff *skb, struct Qdisc *q, u32 clid,
 	if (q->stab && qdisc_dump_stab(skb, q->stab) < 0)
 		goto nla_put_failure;
 
-	if (gnet_stats_start_copy_compat(skb, TCA_STATS2, TCA_STATS,
-					 TCA_XSTATS, qdisc_root_lock(q), &d) < 0)
+	if (gnet_stats_start_copy_compat(skb, TCA_STATS2, TCA_STATS, TCA_XSTATS,
+					 qdisc_root_sleeping_lock(q), &d) < 0)
 		goto nla_put_failure;
 
 	if (q->ops->dump_stats && q->ops->dump_stats(q, &d) < 0)
@@ -1261,11 +1289,11 @@ static int tc_dump_qdisc(struct sk_buff *skb, struct netlink_callback *cb)
 		q_idx = 0;
 
 		dev_queue = netdev_get_tx_queue(dev, 0);
-		if (tc_dump_qdisc_root(dev_queue->qdisc, skb, cb, &q_idx, s_q_idx) < 0)
+		if (tc_dump_qdisc_root(dev_queue->qdisc_sleeping, skb, cb, &q_idx, s_q_idx) < 0)
 			goto done;
 
 		dev_queue = &dev->rx_queue;
-		if (tc_dump_qdisc_root(dev_queue->qdisc, skb, cb, &q_idx, s_q_idx) < 0)
+		if (tc_dump_qdisc_root(dev_queue->qdisc_sleeping, skb, cb, &q_idx, s_q_idx) < 0)
 			goto done;
 
 cont:
@@ -1433,8 +1461,8 @@ static int tc_fill_tclass(struct sk_buff *skb, struct Qdisc *q,
 	if (cl_ops->dump && cl_ops->dump(q, cl, skb, tcm) < 0)
 		goto nla_put_failure;
 
-	if (gnet_stats_start_copy_compat(skb, TCA_STATS2, TCA_STATS,
-					 TCA_XSTATS, qdisc_root_lock(q), &d) < 0)
+	if (gnet_stats_start_copy_compat(skb, TCA_STATS2, TCA_STATS, TCA_XSTATS,
+					 qdisc_root_sleeping_lock(q), &d) < 0)
 		goto nla_put_failure;
 
 	if (cl_ops->dump_stats && cl_ops->dump_stats(q, cl, &d) < 0)
@@ -1554,11 +1582,11 @@ static int tc_dump_tclass(struct sk_buff *skb, struct netlink_callback *cb)
 	t = 0;
 
 	dev_queue = netdev_get_tx_queue(dev, 0);
-	if (tc_dump_tclass_root(dev_queue->qdisc, skb, tcm, cb, &t, s_t) < 0)
+	if (tc_dump_tclass_root(dev_queue->qdisc_sleeping, skb, tcm, cb, &t, s_t) < 0)
 		goto done;
 
 	dev_queue = &dev->rx_queue;
-	if (tc_dump_tclass_root(dev_queue->qdisc, skb, tcm, cb, &t, s_t) < 0)
+	if (tc_dump_tclass_root(dev_queue->qdisc_sleeping, skb, tcm, cb, &t, s_t) < 0)
 		goto done;
 
 done:
diff --git a/net/sched/sch_atm.c b/net/sched/sch_atm.c
index 04faa835be17..43d37256c15e 100644
--- a/net/sched/sch_atm.c
+++ b/net/sched/sch_atm.c
@@ -162,7 +162,7 @@ static void atm_tc_put(struct Qdisc *sch, unsigned long cl)
 	qdisc_destroy(flow->q);
 	tcf_destroy_chain(&flow->filter_list);
 	if (flow->sock) {
-		pr_debug("atm_tc_put: f_count %d\n",
+		pr_debug("atm_tc_put: f_count %ld\n",
 			file_count(flow->sock->file));
 		flow->vcc->pop = flow->old_pop;
 		sockfd_put(flow->sock);
@@ -259,7 +259,7 @@ static int atm_tc_change(struct Qdisc *sch, u32 classid, u32 parent,
 	sock = sockfd_lookup(fd, &error);
 	if (!sock)
 		return error;	/* f_count++ */
-	pr_debug("atm_tc_change: f_count %d\n", file_count(sock->file));
+	pr_debug("atm_tc_change: f_count %ld\n", file_count(sock->file));
 	if (sock->ops->family != PF_ATMSVC && sock->ops->family != PF_ATMPVC) {
 		error = -EPROTOTYPE;
 		goto err_out;
@@ -415,7 +415,7 @@ static int atm_tc_enqueue(struct sk_buff *skb, struct Qdisc *sch)
 		case TC_ACT_QUEUED:
 		case TC_ACT_STOLEN:
 			kfree_skb(skb);
-			return NET_XMIT_SUCCESS;
+			return NET_XMIT_SUCCESS | __NET_XMIT_STOLEN;
 		case TC_ACT_SHOT:
 			kfree_skb(skb);
 			goto drop;
@@ -432,9 +432,11 @@ static int atm_tc_enqueue(struct sk_buff *skb, struct Qdisc *sch)
 	ret = qdisc_enqueue(skb, flow->q);
 	if (ret != 0) {
 drop: __maybe_unused
-		sch->qstats.drops++;
-		if (flow)
-			flow->qstats.drops++;
+		if (net_xmit_drop_count(ret)) {
+			sch->qstats.drops++;
+			if (flow)
+				flow->qstats.drops++;
+		}
 		return ret;
 	}
 	sch->bstats.bytes += qdisc_pkt_len(skb);
@@ -455,7 +457,7 @@ drop: __maybe_unused
 		return 0;
 	}
 	tasklet_schedule(&p->task);
-	return NET_XMIT_BYPASS;
+	return NET_XMIT_SUCCESS | __NET_XMIT_BYPASS;
 }
 
 /*
@@ -530,7 +532,7 @@ static int atm_tc_requeue(struct sk_buff *skb, struct Qdisc *sch)
 	if (!ret) {
 		sch->q.qlen++;
 		sch->qstats.requeues++;
-	} else {
+	} else if (net_xmit_drop_count(ret)) {
 		sch->qstats.drops++;
 		p->link.qstats.drops++;
 	}
diff --git a/net/sched/sch_cbq.c b/net/sched/sch_cbq.c
index f1d2f8ec8b4c..8b06fa900482 100644
--- a/net/sched/sch_cbq.c
+++ b/net/sched/sch_cbq.c
@@ -230,7 +230,7 @@ cbq_classify(struct sk_buff *skb, struct Qdisc *sch, int *qerr)
 	    (cl = cbq_class_lookup(q, prio)) != NULL)
 		return cl;
 
-	*qerr = NET_XMIT_BYPASS;
+	*qerr = NET_XMIT_SUCCESS | __NET_XMIT_BYPASS;
 	for (;;) {
 		int result = 0;
 		defmap = head->defaults;
@@ -256,7 +256,7 @@ cbq_classify(struct sk_buff *skb, struct Qdisc *sch, int *qerr)
 		switch (result) {
 		case TC_ACT_QUEUED:
 		case TC_ACT_STOLEN:
-			*qerr = NET_XMIT_SUCCESS;
+			*qerr = NET_XMIT_SUCCESS | __NET_XMIT_STOLEN;
 		case TC_ACT_SHOT:
 			return NULL;
 		case TC_ACT_RECLASSIFY:
@@ -377,7 +377,7 @@ cbq_enqueue(struct sk_buff *skb, struct Qdisc *sch)
 	q->rx_class = cl;
 #endif
 	if (cl == NULL) {
-		if (ret == NET_XMIT_BYPASS)
+		if (ret & __NET_XMIT_BYPASS)
 			sch->qstats.drops++;
 		kfree_skb(skb);
 		return ret;
@@ -397,9 +397,11 @@ cbq_enqueue(struct sk_buff *skb, struct Qdisc *sch)
 		return ret;
 	}
 
-	sch->qstats.drops++;
-	cbq_mark_toplevel(q, cl);
-	cl->qstats.drops++;
+	if (net_xmit_drop_count(ret)) {
+		sch->qstats.drops++;
+		cbq_mark_toplevel(q, cl);
+		cl->qstats.drops++;
+	}
 	return ret;
 }
 
@@ -430,8 +432,10 @@ cbq_requeue(struct sk_buff *skb, struct Qdisc *sch)
 			cbq_activate_class(cl);
 		return 0;
 	}
-	sch->qstats.drops++;
-	cl->qstats.drops++;
+	if (net_xmit_drop_count(ret)) {
+		sch->qstats.drops++;
+		cl->qstats.drops++;
+	}
 	return ret;
 }
 
@@ -517,6 +521,10 @@ static void cbq_ovl_delay(struct cbq_class *cl)
 	struct cbq_sched_data *q = qdisc_priv(cl->qdisc);
 	psched_tdiff_t delay = cl->undertime - q->now;
 
+	if (test_bit(__QDISC_STATE_DEACTIVATED,
+		     &qdisc_root_sleeping(cl->qdisc)->state))
+		return;
+
 	if (!cl->delayed) {
 		psched_time_t sched = q->now;
 		ktime_t expires;
@@ -650,7 +658,7 @@ static enum hrtimer_restart cbq_undelay(struct hrtimer *timer)
 	}
 
 	sch->flags &= ~TCQ_F_THROTTLED;
-	__netif_schedule(sch);
+	__netif_schedule(qdisc_root(sch));
 	return HRTIMER_NORESTART;
 }
 
@@ -664,13 +672,15 @@ static int cbq_reshape_fail(struct sk_buff *skb, struct Qdisc *child)
 	q->rx_class = NULL;
 
 	if (cl && (cl = cbq_reclassify(skb, cl)) != NULL) {
+		int ret;
 
 		cbq_mark_toplevel(q, cl);
 
 		q->rx_class = cl;
 		cl->q->__parent = sch;
 
-		if (qdisc_enqueue(skb, cl->q) == 0) {
+		ret = qdisc_enqueue(skb, cl->q);
+		if (ret == NET_XMIT_SUCCESS) {
 			sch->q.qlen++;
 			sch->bstats.packets++;
 			sch->bstats.bytes += qdisc_pkt_len(skb);
@@ -678,7 +688,8 @@ static int cbq_reshape_fail(struct sk_buff *skb, struct Qdisc *child)
 				cbq_activate_class(cl);
 			return 0;
 		}
-		sch->qstats.drops++;
+		if (net_xmit_drop_count(ret))
+			sch->qstats.drops++;
 		return 0;
 	}
 
@@ -1175,7 +1186,7 @@ static void cbq_unlink_class(struct cbq_class *this)
 				this->tparent->children = NULL;
 		}
 	} else {
-		BUG_TRAP(this->sibling == this);
+		WARN_ON(this->sibling != this);
 	}
 }
 
@@ -1699,7 +1710,7 @@ static void cbq_destroy_class(struct Qdisc *sch, struct cbq_class *cl)
 {
 	struct cbq_sched_data *q = qdisc_priv(sch);
 
-	BUG_TRAP(!cl->filters);
+	WARN_ON(cl->filters);
 
 	tcf_destroy_chain(&cl->filter_list);
 	qdisc_destroy(cl->q);
@@ -1743,7 +1754,7 @@ static void cbq_put(struct Qdisc *sch, unsigned long arg)
 
 	if (--cl->refcnt == 0) {
 #ifdef CONFIG_NET_CLS_ACT
-		spinlock_t *root_lock = qdisc_root_lock(sch);
+		spinlock_t *root_lock = qdisc_root_sleeping_lock(sch);
 		struct cbq_sched_data *q = qdisc_priv(sch);
 
 		spin_lock_bh(root_lock);
@@ -1828,7 +1839,7 @@ cbq_change_class(struct Qdisc *sch, u32 classid, u32 parentid, struct nlattr **t
 
 		if (tca[TCA_RATE])
 			gen_replace_estimator(&cl->bstats, &cl->rate_est,
-					      qdisc_root_lock(sch),
+					      qdisc_root_sleeping_lock(sch),
 					      tca[TCA_RATE]);
 		return 0;
 	}
@@ -1919,7 +1930,7 @@ cbq_change_class(struct Qdisc *sch, u32 classid, u32 parentid, struct nlattr **t
 
 	if (tca[TCA_RATE])
 		gen_new_estimator(&cl->bstats, &cl->rate_est,
-				  qdisc_root_lock(sch), tca[TCA_RATE]);
+				  qdisc_root_sleeping_lock(sch), tca[TCA_RATE]);
 
 	*arg = (unsigned long)cl;
 	return 0;
diff --git a/net/sched/sch_dsmark.c b/net/sched/sch_dsmark.c
index a935676987e2..edd1298f85f6 100644
--- a/net/sched/sch_dsmark.c
+++ b/net/sched/sch_dsmark.c
@@ -236,7 +236,7 @@ static int dsmark_enqueue(struct sk_buff *skb, struct Qdisc *sch)
 		case TC_ACT_QUEUED:
 		case TC_ACT_STOLEN:
 			kfree_skb(skb);
-			return NET_XMIT_SUCCESS;
+			return NET_XMIT_SUCCESS | __NET_XMIT_STOLEN;
 
 		case TC_ACT_SHOT:
 			goto drop;
@@ -254,7 +254,8 @@ static int dsmark_enqueue(struct sk_buff *skb, struct Qdisc *sch)
 
 	err = qdisc_enqueue(skb, p->q);
 	if (err != NET_XMIT_SUCCESS) {
-		sch->qstats.drops++;
+		if (net_xmit_drop_count(err))
+			sch->qstats.drops++;
 		return err;
 	}
 
@@ -267,7 +268,7 @@ static int dsmark_enqueue(struct sk_buff *skb, struct Qdisc *sch)
 drop:
 	kfree_skb(skb);
 	sch->qstats.drops++;
-	return NET_XMIT_BYPASS;
+	return NET_XMIT_SUCCESS | __NET_XMIT_BYPASS;
 }
 
 static struct sk_buff *dsmark_dequeue(struct Qdisc *sch)
@@ -321,7 +322,8 @@ static int dsmark_requeue(struct sk_buff *skb, struct Qdisc *sch)
 
 	err = p->q->ops->requeue(skb, p->q);
 	if (err != NET_XMIT_SUCCESS) {
-		sch->qstats.drops++;
+		if (net_xmit_drop_count(err))
+			sch->qstats.drops++;
 		return err;
 	}
 
diff --git a/net/sched/sch_generic.c b/net/sched/sch_generic.c
index 4ac7e3a8c253..9634091ee2f0 100644
--- a/net/sched/sch_generic.c
+++ b/net/sched/sch_generic.c
@@ -29,7 +29,7 @@
 /* Main transmission queue. */
 
 /* Modifications to data participating in scheduling must be protected with
- * qdisc_root_lock(qdisc) spinlock.
+ * qdisc_lock(qdisc) spinlock.
  *
  * The idea is the following:
  * - enqueue, dequeue are serialized via qdisc root lock
@@ -126,7 +126,7 @@ static inline int qdisc_restart(struct Qdisc *q)
 	if (unlikely((skb = dequeue_skb(q)) == NULL))
 		return 0;
 
-	root_lock = qdisc_root_lock(q);
+	root_lock = qdisc_lock(q);
 
 	/* And release qdisc */
 	spin_unlock(root_lock);
@@ -135,7 +135,8 @@ static inline int qdisc_restart(struct Qdisc *q)
 	txq = netdev_get_tx_queue(dev, skb_get_queue_mapping(skb));
 
 	HARD_TX_LOCK(dev, txq, smp_processor_id());
-	if (!netif_subqueue_stopped(dev, skb))
+	if (!netif_tx_queue_stopped(txq) &&
+	    !netif_tx_queue_frozen(txq))
 		ret = dev_hard_start_xmit(skb, dev, txq);
 	HARD_TX_UNLOCK(dev, txq);
 
@@ -162,7 +163,8 @@ static inline int qdisc_restart(struct Qdisc *q)
 		break;
 	}
 
-	if (ret && netif_tx_queue_stopped(txq))
+	if (ret && (netif_tx_queue_stopped(txq) ||
+		    netif_tx_queue_frozen(txq)))
 		ret = 0;
 
 	return ret;
@@ -505,7 +507,7 @@ errout:
 }
 EXPORT_SYMBOL(qdisc_create_dflt);
 
-/* Under qdisc_root_lock(qdisc) and BH! */
+/* Under qdisc_lock(qdisc) and BH! */
 
 void qdisc_reset(struct Qdisc *qdisc)
 {
@@ -516,15 +518,17 @@ void qdisc_reset(struct Qdisc *qdisc)
 }
 EXPORT_SYMBOL(qdisc_reset);
 
-/* this is the rcu callback function to clean up a qdisc when there
- * are no further references to it */
-
-static void __qdisc_destroy(struct rcu_head *head)
+void qdisc_destroy(struct Qdisc *qdisc)
 {
-	struct Qdisc *qdisc = container_of(head, struct Qdisc, q_rcu);
 	const struct Qdisc_ops  *ops = qdisc->ops;
 
+	if (qdisc->flags & TCQ_F_BUILTIN ||
+	    !atomic_dec_and_test(&qdisc->refcnt))
+		return;
+
 #ifdef CONFIG_NET_SCHED
+	qdisc_list_del(qdisc);
+
 	qdisc_put_stab(qdisc->stab);
 #endif
 	gen_kill_estimator(&qdisc->bstats, &qdisc->rate_est);
@@ -540,20 +544,6 @@ static void __qdisc_destroy(struct rcu_head *head)
 
 	kfree((char *) qdisc - qdisc->padded);
 }
-
-/* Under qdisc_root_lock(qdisc) and BH! */
-
-void qdisc_destroy(struct Qdisc *qdisc)
-{
-	if (qdisc->flags & TCQ_F_BUILTIN ||
-	    !atomic_dec_and_test(&qdisc->refcnt))
-		return;
-
-	if (qdisc->parent)
-		list_del(&qdisc->list);
-
-	call_rcu(&qdisc->q_rcu, __qdisc_destroy);
-}
 EXPORT_SYMBOL(qdisc_destroy);
 
 static bool dev_all_qdisc_sleeping_noop(struct net_device *dev)
@@ -595,8 +585,11 @@ static void transition_one_qdisc(struct net_device *dev,
 	struct Qdisc *new_qdisc = dev_queue->qdisc_sleeping;
 	int *need_watchdog_p = _need_watchdog;
 
+	if (!(new_qdisc->flags & TCQ_F_BUILTIN))
+		clear_bit(__QDISC_STATE_DEACTIVATED, &new_qdisc->state);
+
 	rcu_assign_pointer(dev_queue->qdisc, new_qdisc);
-	if (new_qdisc != &noqueue_qdisc)
+	if (need_watchdog_p && new_qdisc != &noqueue_qdisc)
 		*need_watchdog_p = 1;
 }
 
@@ -619,6 +612,7 @@ void dev_activate(struct net_device *dev)
 
 	need_watchdog = 0;
 	netdev_for_each_tx_queue(dev, transition_one_qdisc, &need_watchdog);
+	transition_one_qdisc(dev, &dev->rx_queue, NULL);
 
 	if (need_watchdog) {
 		dev->trans_start = jiffies;
@@ -637,14 +631,17 @@ static void dev_deactivate_queue(struct net_device *dev,
 	if (qdisc) {
 		spin_lock_bh(qdisc_lock(qdisc));
 
-		dev_queue->qdisc = qdisc_default;
+		if (!(qdisc->flags & TCQ_F_BUILTIN))
+			set_bit(__QDISC_STATE_DEACTIVATED, &qdisc->state);
+
+		rcu_assign_pointer(dev_queue->qdisc, qdisc_default);
 		qdisc_reset(qdisc);
 
 		spin_unlock_bh(qdisc_lock(qdisc));
 	}
 }
 
-static bool some_qdisc_is_running(struct net_device *dev, int lock)
+static bool some_qdisc_is_busy(struct net_device *dev)
 {
 	unsigned int i;
 
@@ -655,16 +652,15 @@ static bool some_qdisc_is_running(struct net_device *dev, int lock)
 		int val;
 
 		dev_queue = netdev_get_tx_queue(dev, i);
-		q = dev_queue->qdisc;
-		root_lock = qdisc_root_lock(q);
+		q = dev_queue->qdisc_sleeping;
+		root_lock = qdisc_lock(q);
 
-		if (lock)
-			spin_lock_bh(root_lock);
+		spin_lock_bh(root_lock);
 
-		val = test_bit(__QDISC_STATE_RUNNING, &q->state);
+		val = (test_bit(__QDISC_STATE_RUNNING, &q->state) ||
+		       test_bit(__QDISC_STATE_SCHED, &q->state));
 
-		if (lock)
-			spin_unlock_bh(root_lock);
+		spin_unlock_bh(root_lock);
 
 		if (val)
 			return true;
@@ -674,9 +670,8 @@ static bool some_qdisc_is_running(struct net_device *dev, int lock)
 
 void dev_deactivate(struct net_device *dev)
 {
-	bool running;
-
 	netdev_for_each_tx_queue(dev, dev_deactivate_queue, &noop_qdisc);
+	dev_deactivate_queue(dev, &dev->rx_queue, &noop_qdisc);
 
 	dev_watchdog_down(dev);
 
@@ -684,25 +679,8 @@ void dev_deactivate(struct net_device *dev)
 	synchronize_rcu();
 
 	/* Wait for outstanding qdisc_run calls. */
-	do {
-		while (some_qdisc_is_running(dev, 0))
-			yield();
-
-		/*
-		 * Double-check inside queue lock to ensure that all effects
-		 * of the queue run are visible when we return.
-		 */
-		running = some_qdisc_is_running(dev, 1);
-
-		/*
-		 * The running flag should never be set at this point because
-		 * we've already set dev->qdisc to noop_qdisc *inside* the same
-		 * pair of spin locks.  That is, if any qdisc_run starts after
-		 * our initial test it should see the noop_qdisc and then
-		 * clear the RUNNING bit before dropping the queue lock.  So
-		 * if it is set here then we've found a bug.
-		 */
-	} while (WARN_ON_ONCE(running));
+	while (some_qdisc_is_busy(dev))
+		yield();
 }
 
 static void dev_init_scheduler_queue(struct net_device *dev,
@@ -718,7 +696,7 @@ static void dev_init_scheduler_queue(struct net_device *dev,
 void dev_init_scheduler(struct net_device *dev)
 {
 	netdev_for_each_tx_queue(dev, dev_init_scheduler_queue, &noop_qdisc);
-	dev_init_scheduler_queue(dev, &dev->rx_queue, NULL);
+	dev_init_scheduler_queue(dev, &dev->rx_queue, &noop_qdisc);
 
 	setup_timer(&dev->watchdog_timer, dev_watchdog, (unsigned long)dev);
 }
@@ -731,20 +709,16 @@ static void shutdown_scheduler_queue(struct net_device *dev,
 	struct Qdisc *qdisc_default = _qdisc_default;
 
 	if (qdisc) {
-		spinlock_t *root_lock = qdisc_root_lock(qdisc);
-
-		dev_queue->qdisc = qdisc_default;
+		rcu_assign_pointer(dev_queue->qdisc, qdisc_default);
 		dev_queue->qdisc_sleeping = qdisc_default;
 
-		spin_lock(root_lock);
 		qdisc_destroy(qdisc);
-		spin_unlock(root_lock);
 	}
 }
 
 void dev_shutdown(struct net_device *dev)
 {
 	netdev_for_each_tx_queue(dev, shutdown_scheduler_queue, &noop_qdisc);
-	shutdown_scheduler_queue(dev, &dev->rx_queue, NULL);
-	BUG_TRAP(!timer_pending(&dev->watchdog_timer));
+	shutdown_scheduler_queue(dev, &dev->rx_queue, &noop_qdisc);
+	WARN_ON(timer_pending(&dev->watchdog_timer));
 }
diff --git a/net/sched/sch_hfsc.c b/net/sched/sch_hfsc.c
index 0ae7d19dcba8..c1e77da8cd09 100644
--- a/net/sched/sch_hfsc.c
+++ b/net/sched/sch_hfsc.c
@@ -1045,7 +1045,7 @@ hfsc_change_class(struct Qdisc *sch, u32 classid, u32 parentid,
 
 		if (tca[TCA_RATE])
 			gen_replace_estimator(&cl->bstats, &cl->rate_est,
-					      qdisc_root_lock(sch),
+					      qdisc_root_sleeping_lock(sch),
 					      tca[TCA_RATE]);
 		return 0;
 	}
@@ -1104,7 +1104,7 @@ hfsc_change_class(struct Qdisc *sch, u32 classid, u32 parentid,
 
 	if (tca[TCA_RATE])
 		gen_new_estimator(&cl->bstats, &cl->rate_est,
-				  qdisc_root_lock(sch), tca[TCA_RATE]);
+				  qdisc_root_sleeping_lock(sch), tca[TCA_RATE]);
 	*arg = (unsigned long)cl;
 	return 0;
 }
@@ -1159,14 +1159,14 @@ hfsc_classify(struct sk_buff *skb, struct Qdisc *sch, int *qerr)
 		if (cl->level == 0)
 			return cl;
 
-	*qerr = NET_XMIT_BYPASS;
+	*qerr = NET_XMIT_SUCCESS | __NET_XMIT_BYPASS;
 	tcf = q->root.filter_list;
 	while (tcf && (result = tc_classify(skb, tcf, &res)) >= 0) {
 #ifdef CONFIG_NET_CLS_ACT
 		switch (result) {
 		case TC_ACT_QUEUED:
 		case TC_ACT_STOLEN:
-			*qerr = NET_XMIT_SUCCESS;
+			*qerr = NET_XMIT_SUCCESS | __NET_XMIT_STOLEN;
 		case TC_ACT_SHOT:
 			return NULL;
 		}
@@ -1578,7 +1578,7 @@ hfsc_enqueue(struct sk_buff *skb, struct Qdisc *sch)
 
 	cl = hfsc_classify(skb, sch, &err);
 	if (cl == NULL) {
-		if (err == NET_XMIT_BYPASS)
+		if (err & __NET_XMIT_BYPASS)
 			sch->qstats.drops++;
 		kfree_skb(skb);
 		return err;
@@ -1586,8 +1586,10 @@ hfsc_enqueue(struct sk_buff *skb, struct Qdisc *sch)
 
 	err = qdisc_enqueue(skb, cl->qdisc);
 	if (unlikely(err != NET_XMIT_SUCCESS)) {
-		cl->qstats.drops++;
-		sch->qstats.drops++;
+		if (net_xmit_drop_count(err)) {
+			cl->qstats.drops++;
+			sch->qstats.drops++;
+		}
 		return err;
 	}
 
diff --git a/net/sched/sch_htb.c b/net/sched/sch_htb.c
index 30c999c61b01..d14f02056ae6 100644
--- a/net/sched/sch_htb.c
+++ b/net/sched/sch_htb.c
@@ -214,14 +214,14 @@ static struct htb_class *htb_classify(struct sk_buff *skb, struct Qdisc *sch,
 	if ((cl = htb_find(skb->priority, sch)) != NULL && cl->level == 0)
 		return cl;
 
-	*qerr = NET_XMIT_BYPASS;
+	*qerr = NET_XMIT_SUCCESS | __NET_XMIT_BYPASS;
 	tcf = q->filter_list;
 	while (tcf && (result = tc_classify(skb, tcf, &res)) >= 0) {
 #ifdef CONFIG_NET_CLS_ACT
 		switch (result) {
 		case TC_ACT_QUEUED:
 		case TC_ACT_STOLEN:
-			*qerr = NET_XMIT_SUCCESS;
+			*qerr = NET_XMIT_SUCCESS | __NET_XMIT_STOLEN;
 		case TC_ACT_SHOT:
 			return NULL;
 		}
@@ -524,7 +524,7 @@ htb_change_class_mode(struct htb_sched *q, struct htb_class *cl, long *diff)
  */
 static inline void htb_activate(struct htb_sched *q, struct htb_class *cl)
 {
-	BUG_TRAP(!cl->level && cl->un.leaf.q && cl->un.leaf.q->q.qlen);
+	WARN_ON(cl->level || !cl->un.leaf.q || !cl->un.leaf.q->q.qlen);
 
 	if (!cl->prio_activity) {
 		cl->prio_activity = 1 << (cl->un.leaf.aprio = cl->un.leaf.prio);
@@ -542,7 +542,7 @@ static inline void htb_activate(struct htb_sched *q, struct htb_class *cl)
  */
 static inline void htb_deactivate(struct htb_sched *q, struct htb_class *cl)
 {
-	BUG_TRAP(cl->prio_activity);
+	WARN_ON(!cl->prio_activity);
 
 	htb_deactivate_prios(q, cl);
 	cl->prio_activity = 0;
@@ -567,15 +567,17 @@ static int htb_enqueue(struct sk_buff *skb, struct Qdisc *sch)
 		}
 #ifdef CONFIG_NET_CLS_ACT
 	} else if (!cl) {
-		if (ret == NET_XMIT_BYPASS)
+		if (ret & __NET_XMIT_BYPASS)
 			sch->qstats.drops++;
 		kfree_skb(skb);
 		return ret;
 #endif
-	} else if (qdisc_enqueue(skb, cl->un.leaf.q) != NET_XMIT_SUCCESS) {
-		sch->qstats.drops++;
-		cl->qstats.drops++;
-		return NET_XMIT_DROP;
+	} else if ((ret = qdisc_enqueue(skb, cl->un.leaf.q)) != NET_XMIT_SUCCESS) {
+		if (net_xmit_drop_count(ret)) {
+			sch->qstats.drops++;
+			cl->qstats.drops++;
+		}
+		return ret;
 	} else {
 		cl->bstats.packets +=
 			skb_is_gso(skb)?skb_shinfo(skb)->gso_segs:1;
@@ -610,16 +612,18 @@ static int htb_requeue(struct sk_buff *skb, struct Qdisc *sch)
 		}
 #ifdef CONFIG_NET_CLS_ACT
 	} else if (!cl) {
-		if (ret == NET_XMIT_BYPASS)
+		if (ret & __NET_XMIT_BYPASS)
 			sch->qstats.drops++;
 		kfree_skb(skb);
 		return ret;
 #endif
-	} else if (cl->un.leaf.q->ops->requeue(skb, cl->un.leaf.q) !=
+	} else if ((ret = cl->un.leaf.q->ops->requeue(skb, cl->un.leaf.q)) !=
 		   NET_XMIT_SUCCESS) {
-		sch->qstats.drops++;
-		cl->qstats.drops++;
-		return NET_XMIT_DROP;
+		if (net_xmit_drop_count(ret)) {
+			sch->qstats.drops++;
+			cl->qstats.drops++;
+		}
+		return ret;
 	} else
 		htb_activate(q, cl);
 
@@ -757,7 +761,7 @@ static struct htb_class *htb_lookup_leaf(struct rb_root *tree, int prio,
 		u32 *pid;
 	} stk[TC_HTB_MAXDEPTH], *sp = stk;
 
-	BUG_TRAP(tree->rb_node);
+	WARN_ON(!tree->rb_node);
 	sp->root = tree->rb_node;
 	sp->pptr = pptr;
 	sp->pid = pid;
@@ -777,7 +781,7 @@ static struct htb_class *htb_lookup_leaf(struct rb_root *tree, int prio,
 				*sp->pptr = (*sp->pptr)->rb_left;
 			if (sp > stk) {
 				sp--;
-				BUG_TRAP(*sp->pptr);
+				WARN_ON(!*sp->pptr);
 				if (!*sp->pptr)
 					return NULL;
 				htb_next_rb_node(sp->pptr);
@@ -792,7 +796,7 @@ static struct htb_class *htb_lookup_leaf(struct rb_root *tree, int prio,
 			sp->pid = cl->un.inner.last_ptr_id + prio;
 		}
 	}
-	BUG_TRAP(0);
+	WARN_ON(1);
 	return NULL;
 }
 
@@ -810,7 +814,7 @@ static struct sk_buff *htb_dequeue_tree(struct htb_sched *q, int prio,
 
 	do {
 next:
-		BUG_TRAP(cl);
+		WARN_ON(!cl);
 		if (!cl)
 			return NULL;
 
@@ -1039,7 +1043,7 @@ static int htb_init(struct Qdisc *sch, struct nlattr *opt)
 
 static int htb_dump(struct Qdisc *sch, struct sk_buff *skb)
 {
-	spinlock_t *root_lock = qdisc_root_lock(sch);
+	spinlock_t *root_lock = qdisc_root_sleeping_lock(sch);
 	struct htb_sched *q = qdisc_priv(sch);
 	struct nlattr *nest;
 	struct tc_htb_glob gopt;
@@ -1071,7 +1075,7 @@ static int htb_dump_class(struct Qdisc *sch, unsigned long arg,
 			  struct sk_buff *skb, struct tcmsg *tcm)
 {
 	struct htb_class *cl = (struct htb_class *)arg;
-	spinlock_t *root_lock = qdisc_root_lock(sch);
+	spinlock_t *root_lock = qdisc_root_sleeping_lock(sch);
 	struct nlattr *nest;
 	struct tc_htb_opt opt;
 
@@ -1185,7 +1189,7 @@ static void htb_parent_to_leaf(struct htb_sched *q, struct htb_class *cl,
 {
 	struct htb_class *parent = cl->parent;
 
-	BUG_TRAP(!cl->level && cl->un.leaf.q && !cl->prio_activity);
+	WARN_ON(cl->level || !cl->un.leaf.q || cl->prio_activity);
 
 	if (parent->cmode != HTB_CAN_SEND)
 		htb_safe_rb_erase(&parent->pq_node, q->wait_pq + parent->level);
@@ -1205,7 +1209,7 @@ static void htb_parent_to_leaf(struct htb_sched *q, struct htb_class *cl,
 static void htb_destroy_class(struct Qdisc *sch, struct htb_class *cl)
 {
 	if (!cl->level) {
-		BUG_TRAP(cl->un.leaf.q);
+		WARN_ON(!cl->un.leaf.q);
 		qdisc_destroy(cl->un.leaf.q);
 	}
 	gen_kill_estimator(&cl->bstats, &cl->rate_est);
@@ -1275,7 +1279,8 @@ static int htb_delete(struct Qdisc *sch, unsigned long arg)
 
 	/* delete from hash and active; remainder in destroy_class */
 	qdisc_class_hash_remove(&q->clhash, &cl->common);
-	cl->parent->children--;
+	if (cl->parent)
+		cl->parent->children--;
 
 	if (cl->prio_activity)
 		htb_deactivate(q, cl);
@@ -1367,7 +1372,7 @@ static int htb_change_class(struct Qdisc *sch, u32 classid,
 			goto failure;
 
 		gen_new_estimator(&cl->bstats, &cl->rate_est,
-				  qdisc_root_lock(sch),
+				  qdisc_root_sleeping_lock(sch),
 				  tca[TCA_RATE] ? : &est.nla);
 		cl->refcnt = 1;
 		cl->children = 0;
@@ -1422,7 +1427,7 @@ static int htb_change_class(struct Qdisc *sch, u32 classid,
 	} else {
 		if (tca[TCA_RATE])
 			gen_replace_estimator(&cl->bstats, &cl->rate_est,
-					      qdisc_root_lock(sch),
+					      qdisc_root_sleeping_lock(sch),
 					      tca[TCA_RATE]);
 		sch_tree_lock(sch);
 	}
diff --git a/net/sched/sch_netem.c b/net/sched/sch_netem.c
index a59085700678..3781e55046d0 100644
--- a/net/sched/sch_netem.c
+++ b/net/sched/sch_netem.c
@@ -176,7 +176,7 @@ static int netem_enqueue(struct sk_buff *skb, struct Qdisc *sch)
 	if (count == 0) {
 		sch->qstats.drops++;
 		kfree_skb(skb);
-		return NET_XMIT_BYPASS;
+		return NET_XMIT_SUCCESS | __NET_XMIT_BYPASS;
 	}
 
 	skb_orphan(skb);
@@ -240,8 +240,9 @@ static int netem_enqueue(struct sk_buff *skb, struct Qdisc *sch)
 		sch->q.qlen++;
 		sch->bstats.bytes += qdisc_pkt_len(skb);
 		sch->bstats.packets++;
-	} else
+	} else if (net_xmit_drop_count(ret)) {
 		sch->qstats.drops++;
+	}
 
 	pr_debug("netem: enqueue ret %d\n", ret);
 	return ret;
@@ -340,7 +341,7 @@ static int get_dist_table(struct Qdisc *sch, const struct nlattr *attr)
 	for (i = 0; i < n; i++)
 		d->table[i] = data[i];
 
-	root_lock = qdisc_root_lock(sch);
+	root_lock = qdisc_root_sleeping_lock(sch);
 
 	spin_lock_bh(root_lock);
 	d = xchg(&q->delay_dist, d);
diff --git a/net/sched/sch_prio.c b/net/sched/sch_prio.c
index f849243eb095..a6697c686c7f 100644
--- a/net/sched/sch_prio.c
+++ b/net/sched/sch_prio.c
@@ -38,14 +38,14 @@ prio_classify(struct sk_buff *skb, struct Qdisc *sch, int *qerr)
 	struct tcf_result res;
 	int err;
 
-	*qerr = NET_XMIT_BYPASS;
+	*qerr = NET_XMIT_SUCCESS | __NET_XMIT_BYPASS;
 	if (TC_H_MAJ(skb->priority) != sch->handle) {
 		err = tc_classify(skb, q->filter_list, &res);
 #ifdef CONFIG_NET_CLS_ACT
 		switch (err) {
 		case TC_ACT_STOLEN:
 		case TC_ACT_QUEUED:
-			*qerr = NET_XMIT_SUCCESS;
+			*qerr = NET_XMIT_SUCCESS | __NET_XMIT_STOLEN;
 		case TC_ACT_SHOT:
 			return NULL;
 		}
@@ -74,7 +74,7 @@ prio_enqueue(struct sk_buff *skb, struct Qdisc *sch)
 #ifdef CONFIG_NET_CLS_ACT
 	if (qdisc == NULL) {
 
-		if (ret == NET_XMIT_BYPASS)
+		if (ret & __NET_XMIT_BYPASS)
 			sch->qstats.drops++;
 		kfree_skb(skb);
 		return ret;
@@ -88,7 +88,8 @@ prio_enqueue(struct sk_buff *skb, struct Qdisc *sch)
 		sch->q.qlen++;
 		return NET_XMIT_SUCCESS;
 	}
-	sch->qstats.drops++;
+	if (net_xmit_drop_count(ret))
+		sch->qstats.drops++;
 	return ret;
 }
 
@@ -102,7 +103,7 @@ prio_requeue(struct sk_buff *skb, struct Qdisc* sch)
 	qdisc = prio_classify(skb, sch, &ret);
 #ifdef CONFIG_NET_CLS_ACT
 	if (qdisc == NULL) {
-		if (ret == NET_XMIT_BYPASS)
+		if (ret & __NET_XMIT_BYPASS)
 			sch->qstats.drops++;
 		kfree_skb(skb);
 		return ret;
@@ -112,10 +113,11 @@ prio_requeue(struct sk_buff *skb, struct Qdisc* sch)
 	if ((ret = qdisc->ops->requeue(skb, qdisc)) == NET_XMIT_SUCCESS) {
 		sch->q.qlen++;
 		sch->qstats.requeues++;
-		return 0;
+		return NET_XMIT_SUCCESS;
 	}
-	sch->qstats.drops++;
-	return NET_XMIT_DROP;
+	if (net_xmit_drop_count(ret))
+		sch->qstats.drops++;
+	return ret;
 }
 
 
diff --git a/net/sched/sch_red.c b/net/sched/sch_red.c
index 3f2d1d7f3bbd..5da05839e225 100644
--- a/net/sched/sch_red.c
+++ b/net/sched/sch_red.c
@@ -97,7 +97,7 @@ static int red_enqueue(struct sk_buff *skb, struct Qdisc* sch)
 		sch->bstats.bytes += qdisc_pkt_len(skb);
 		sch->bstats.packets++;
 		sch->q.qlen++;
-	} else {
+	} else if (net_xmit_drop_count(ret)) {
 		q->stats.pdrop++;
 		sch->qstats.drops++;
 	}
diff --git a/net/sched/sch_sfq.c b/net/sched/sch_sfq.c
index 73f53844ce97..6e041d10dbdb 100644
--- a/net/sched/sch_sfq.c
+++ b/net/sched/sch_sfq.c
@@ -171,14 +171,14 @@ static unsigned int sfq_classify(struct sk_buff *skb, struct Qdisc *sch,
 	if (!q->filter_list)
 		return sfq_hash(q, skb) + 1;
 
-	*qerr = NET_XMIT_BYPASS;
+	*qerr = NET_XMIT_SUCCESS | __NET_XMIT_BYPASS;
 	result = tc_classify(skb, q->filter_list, &res);
 	if (result >= 0) {
 #ifdef CONFIG_NET_CLS_ACT
 		switch (result) {
 		case TC_ACT_STOLEN:
 		case TC_ACT_QUEUED:
-			*qerr = NET_XMIT_SUCCESS;
+			*qerr = NET_XMIT_SUCCESS | __NET_XMIT_STOLEN;
 		case TC_ACT_SHOT:
 			return 0;
 		}
@@ -285,7 +285,7 @@ sfq_enqueue(struct sk_buff *skb, struct Qdisc *sch)
 
 	hash = sfq_classify(skb, sch, &ret);
 	if (hash == 0) {
-		if (ret == NET_XMIT_BYPASS)
+		if (ret & __NET_XMIT_BYPASS)
 			sch->qstats.drops++;
 		kfree_skb(skb);
 		return ret;
@@ -339,7 +339,7 @@ sfq_requeue(struct sk_buff *skb, struct Qdisc *sch)
 
 	hash = sfq_classify(skb, sch, &ret);
 	if (hash == 0) {
-		if (ret == NET_XMIT_BYPASS)
+		if (ret & __NET_XMIT_BYPASS)
 			sch->qstats.drops++;
 		kfree_skb(skb);
 		return ret;
@@ -536,14 +536,7 @@ static int sfq_dump(struct Qdisc *sch, struct sk_buff *skb)
 
 	opt.limit = q->limit;
 	opt.divisor = SFQ_HASH_DIVISOR;
-	opt.flows = 0;
-	if (q->tail != SFQ_DEPTH) {
-		unsigned int i;
-
-		for (i = 0; i < SFQ_HASH_DIVISOR; i++)
-			if (q->ht[i] != SFQ_DEPTH)
-				opt.flows++;
-	}
+	opt.flows = q->limit;
 
 	NLA_PUT(skb, TCA_OPTIONS, sizeof(opt), &opt);
 
diff --git a/net/sched/sch_tbf.c b/net/sched/sch_tbf.c
index b296672f7632..94c61598b86a 100644
--- a/net/sched/sch_tbf.c
+++ b/net/sched/sch_tbf.c
@@ -123,19 +123,13 @@ static int tbf_enqueue(struct sk_buff *skb, struct Qdisc* sch)
 	struct tbf_sched_data *q = qdisc_priv(sch);
 	int ret;
 
-	if (qdisc_pkt_len(skb) > q->max_size) {
-		sch->qstats.drops++;
-#ifdef CONFIG_NET_CLS_ACT
-		if (sch->reshape_fail == NULL || sch->reshape_fail(skb, sch))
-#endif
-			kfree_skb(skb);
-
-		return NET_XMIT_DROP;
-	}
+	if (qdisc_pkt_len(skb) > q->max_size)
+		return qdisc_reshape_fail(skb, sch);
 
 	ret = qdisc_enqueue(skb, q->qdisc);
 	if (ret != 0) {
-		sch->qstats.drops++;
+		if (net_xmit_drop_count(ret))
+			sch->qstats.drops++;
 		return ret;
 	}
 
diff --git a/net/sched/sch_teql.c b/net/sched/sch_teql.c
index 537223642b6e..d35ef059abb1 100644
--- a/net/sched/sch_teql.c
+++ b/net/sched/sch_teql.c
@@ -161,7 +161,7 @@ teql_destroy(struct Qdisc* sch)
 						txq = netdev_get_tx_queue(master->dev, 0);
 						master->slaves = NULL;
 
-						root_lock = qdisc_root_lock(txq->qdisc);
+						root_lock = qdisc_root_sleeping_lock(txq->qdisc);
 						spin_lock_bh(root_lock);
 						qdisc_reset(txq->qdisc);
 						spin_unlock_bh(root_lock);
@@ -305,10 +305,11 @@ restart:
 
 		switch (teql_resolve(skb, skb_res, slave)) {
 		case 0:
-			if (netif_tx_trylock(slave)) {
-				if (!__netif_subqueue_stopped(slave, subq) &&
+			if (__netif_tx_trylock(slave_txq)) {
+				if (!netif_tx_queue_stopped(slave_txq) &&
+				    !netif_tx_queue_frozen(slave_txq) &&
 				    slave->hard_start_xmit(skb, slave) == 0) {
-					netif_tx_unlock(slave);
+					__netif_tx_unlock(slave_txq);
 					master->slaves = NEXT_SLAVE(q);
 					netif_wake_queue(dev);
 					master->stats.tx_packets++;
@@ -316,7 +317,7 @@ restart:
 						qdisc_pkt_len(skb);
 					return 0;
 				}
-				netif_tx_unlock(slave);
+				__netif_tx_unlock(slave_txq);
 			}
 			if (netif_queue_stopped(dev))
 				busy = 1;
diff --git a/net/sctp/associola.c b/net/sctp/associola.c
index ec2a0a33fd78..8472b8b349c4 100644
--- a/net/sctp/associola.c
+++ b/net/sctp/associola.c
@@ -464,7 +464,7 @@ static void sctp_association_destroy(struct sctp_association *asoc)
 		spin_unlock_bh(&sctp_assocs_id_lock);
 	}
 
-	BUG_TRAP(!atomic_read(&asoc->rmem_alloc));
+	WARN_ON(atomic_read(&asoc->rmem_alloc));
 
 	if (asoc->base.malloced) {
 		kfree(asoc);
diff --git a/net/sctp/auth.c b/net/sctp/auth.c
index 675a5c3e68a6..52db5f60daa0 100644
--- a/net/sctp/auth.c
+++ b/net/sctp/auth.c
@@ -80,6 +80,10 @@ static struct sctp_auth_bytes *sctp_auth_create_key(__u32 key_len, gfp_t gfp)
 {
 	struct sctp_auth_bytes *key;
 
+	/* Verify that we are not going to overflow INT_MAX */
+	if ((INT_MAX - key_len) < sizeof(struct sctp_auth_bytes))
+		return NULL;
+
 	/* Allocate the shared key */
 	key = kmalloc(sizeof(struct sctp_auth_bytes) + key_len, gfp);
 	if (!key)
@@ -782,6 +786,9 @@ int sctp_auth_ep_set_hmacs(struct sctp_endpoint *ep,
 	for (i = 0; i < hmacs->shmac_num_idents; i++) {
 		id = hmacs->shmac_idents[i];
 
+		if (id > SCTP_AUTH_HMAC_ID_MAX)
+			return -EOPNOTSUPP;
+
 		if (SCTP_AUTH_HMAC_ID_SHA1 == id)
 			has_sha1 = 1;
 
diff --git a/net/sctp/endpointola.c b/net/sctp/endpointola.c
index e39a0cdef184..4c8d9f45ce09 100644
--- a/net/sctp/endpointola.c
+++ b/net/sctp/endpointola.c
@@ -103,6 +103,7 @@ static struct sctp_endpoint *sctp_endpoint_init(struct sctp_endpoint *ep,
 
 		/* Initialize the CHUNKS parameter */
 		auth_chunks->param_hdr.type = SCTP_PARAM_CHUNKS;
+		auth_chunks->param_hdr.length = htons(sizeof(sctp_paramhdr_t));
 
 		/* If the Add-IP functionality is enabled, we must
 		 * authenticate, ASCONF and ASCONF-ACK chunks
@@ -110,8 +111,7 @@ static struct sctp_endpoint *sctp_endpoint_init(struct sctp_endpoint *ep,
 		if (sctp_addip_enable) {
 			auth_chunks->chunks[0] = SCTP_CID_ASCONF;
 			auth_chunks->chunks[1] = SCTP_CID_ASCONF_ACK;
-			auth_chunks->param_hdr.length =
-					htons(sizeof(sctp_paramhdr_t) + 2);
+			auth_chunks->param_hdr.length += htons(2);
 		}
 	}
 
diff --git a/net/sctp/ipv6.c b/net/sctp/ipv6.c
index a238d6834b33..47f91afa0211 100644
--- a/net/sctp/ipv6.c
+++ b/net/sctp/ipv6.c
@@ -195,8 +195,7 @@ out:
 }
 
 /* Based on tcp_v6_xmit() in tcp_ipv6.c. */
-static int sctp_v6_xmit(struct sk_buff *skb, struct sctp_transport *transport,
-			int ipfragok)
+static int sctp_v6_xmit(struct sk_buff *skb, struct sctp_transport *transport)
 {
 	struct sock *sk = skb->sk;
 	struct ipv6_pinfo *np = inet6_sk(sk);
@@ -231,7 +230,10 @@ static int sctp_v6_xmit(struct sk_buff *skb, struct sctp_transport *transport,
 
 	SCTP_INC_STATS(SCTP_MIB_OUTSCTPPACKS);
 
-	return ip6_xmit(sk, skb, &fl, np->opt, ipfragok);
+	if (!(transport->param_flags & SPP_PMTUD_ENABLE))
+		skb->local_df = 1;
+
+	return ip6_xmit(sk, skb, &fl, np->opt, 0);
 }
 
 /* Returns the dst cache entry for the given source and destination ip
@@ -317,7 +319,8 @@ static void sctp_v6_get_saddr(struct sctp_sock *sk,
 			  __func__, asoc, dst, NIP6(daddr->v6.sin6_addr));
 
 	if (!asoc) {
-		ipv6_dev_get_saddr(dst ? ip6_dst_idev(dst)->dev : NULL,
+		ipv6_dev_get_saddr(sock_net(sctp_opt2sk(sk)),
+				   dst ? ip6_dst_idev(dst)->dev : NULL,
 				   &daddr->v6.sin6_addr,
 				   inet6_sk(&sk->inet.sk)->srcprefs,
 				   &saddr->v6.sin6_addr);
diff --git a/net/sctp/output.c b/net/sctp/output.c
index 45684646b1db..0dc4a7dfb234 100644
--- a/net/sctp/output.c
+++ b/net/sctp/output.c
@@ -586,10 +586,8 @@ int sctp_packet_transmit(struct sctp_packet *packet)
 	SCTP_DEBUG_PRINTK("***sctp_transmit_packet*** skb len %d\n",
 			  nskb->len);
 
-	if (tp->param_flags & SPP_PMTUD_ENABLE)
-		(*tp->af_specific->sctp_xmit)(nskb, tp, packet->ipfragok);
-	else
-		(*tp->af_specific->sctp_xmit)(nskb, tp, 1);
+	nskb->local_df = packet->ipfragok;
+	(*tp->af_specific->sctp_xmit)(nskb, tp);
 
 out:
 	packet->size = packet->overhead;
diff --git a/net/sctp/protocol.c b/net/sctp/protocol.c
index a6e0818bcff5..0b65354aaf64 100644
--- a/net/sctp/protocol.c
+++ b/net/sctp/protocol.c
@@ -862,16 +862,21 @@ static int sctp_inet_supported_addrs(const struct sctp_sock *opt,
 
 /* Wrapper routine that calls the ip transmit routine. */
 static inline int sctp_v4_xmit(struct sk_buff *skb,
-			       struct sctp_transport *transport, int ipfragok)
+			       struct sctp_transport *transport)
 {
+	struct inet_sock *inet = inet_sk(skb->sk);
+
 	SCTP_DEBUG_PRINTK("%s: skb:%p, len:%d, "
 			  "src:%u.%u.%u.%u, dst:%u.%u.%u.%u\n",
 			  __func__, skb, skb->len,
 			  NIPQUAD(skb->rtable->rt_src),
 			  NIPQUAD(skb->rtable->rt_dst));
 
+	inet->pmtudisc = transport->param_flags & SPP_PMTUD_ENABLE ?
+			 IP_PMTUDISC_DO : IP_PMTUDISC_DONT;
+
 	SCTP_INC_STATS(SCTP_MIB_OUTSCTPPACKS);
-	return ip_queue_xmit(skb, ipfragok);
+	return ip_queue_xmit(skb, 0);
 }
 
 static struct sctp_af sctp_af_inet;
diff --git a/net/sctp/socket.c b/net/sctp/socket.c
index dbb79adf8f3c..5ffb9dec1c3f 100644
--- a/net/sctp/socket.c
+++ b/net/sctp/socket.c
@@ -3055,6 +3055,9 @@ static int sctp_setsockopt_auth_chunk(struct sock *sk,
 {
 	struct sctp_authchunk val;
 
+	if (!sctp_auth_enable)
+		return -EACCES;
+
 	if (optlen != sizeof(struct sctp_authchunk))
 		return -EINVAL;
 	if (copy_from_user(&val, optval, optlen))
@@ -3083,8 +3086,12 @@ static int sctp_setsockopt_hmac_ident(struct sock *sk,
 				    int optlen)
 {
 	struct sctp_hmacalgo *hmacs;
+	u32 idents;
 	int err;
 
+	if (!sctp_auth_enable)
+		return -EACCES;
+
 	if (optlen < sizeof(struct sctp_hmacalgo))
 		return -EINVAL;
 
@@ -3097,8 +3104,9 @@ static int sctp_setsockopt_hmac_ident(struct sock *sk,
 		goto out;
 	}
 
-	if (hmacs->shmac_num_idents == 0 ||
-	    hmacs->shmac_num_idents > SCTP_AUTH_NUM_HMACS) {
+	idents = hmacs->shmac_num_idents;
+	if (idents == 0 || idents > SCTP_AUTH_NUM_HMACS ||
+	    (idents * sizeof(u16)) > (optlen - sizeof(struct sctp_hmacalgo))) {
 		err = -EINVAL;
 		goto out;
 	}
@@ -3123,6 +3131,9 @@ static int sctp_setsockopt_auth_key(struct sock *sk,
 	struct sctp_association *asoc;
 	int ret;
 
+	if (!sctp_auth_enable)
+		return -EACCES;
+
 	if (optlen <= sizeof(struct sctp_authkey))
 		return -EINVAL;
 
@@ -3135,6 +3146,11 @@ static int sctp_setsockopt_auth_key(struct sock *sk,
 		goto out;
 	}
 
+	if (authkey->sca_keylength > optlen - sizeof(struct sctp_authkey)) {
+		ret = -EINVAL;
+		goto out;
+	}
+
 	asoc = sctp_id2assoc(sk, authkey->sca_assoc_id);
 	if (!asoc && authkey->sca_assoc_id && sctp_style(sk, UDP)) {
 		ret = -EINVAL;
@@ -3160,6 +3176,9 @@ static int sctp_setsockopt_active_key(struct sock *sk,
 	struct sctp_authkeyid val;
 	struct sctp_association *asoc;
 
+	if (!sctp_auth_enable)
+		return -EACCES;
+
 	if (optlen != sizeof(struct sctp_authkeyid))
 		return -EINVAL;
 	if (copy_from_user(&val, optval, optlen))
@@ -3185,6 +3204,9 @@ static int sctp_setsockopt_del_key(struct sock *sk,
 	struct sctp_authkeyid val;
 	struct sctp_association *asoc;
 
+	if (!sctp_auth_enable)
+		return -EACCES;
+
 	if (optlen != sizeof(struct sctp_authkeyid))
 		return -EINVAL;
 	if (copy_from_user(&val, optval, optlen))
@@ -5197,19 +5219,29 @@ static int sctp_getsockopt_maxburst(struct sock *sk, int len,
 static int sctp_getsockopt_hmac_ident(struct sock *sk, int len,
 				    char __user *optval, int __user *optlen)
 {
+	struct sctp_hmacalgo  __user *p = (void __user *)optval;
 	struct sctp_hmac_algo_param *hmacs;
-	__u16 param_len;
+	__u16 data_len = 0;
+	u32 num_idents;
+
+	if (!sctp_auth_enable)
+		return -EACCES;
 
 	hmacs = sctp_sk(sk)->ep->auth_hmacs_list;
-	param_len = ntohs(hmacs->param_hdr.length);
+	data_len = ntohs(hmacs->param_hdr.length) - sizeof(sctp_paramhdr_t);
 
-	if (len < param_len)
+	if (len < sizeof(struct sctp_hmacalgo) + data_len)
 		return -EINVAL;
+
+	len = sizeof(struct sctp_hmacalgo) + data_len;
+	num_idents = data_len / sizeof(u16);
+
 	if (put_user(len, optlen))
 		return -EFAULT;
-	if (copy_to_user(optval, hmacs->hmac_ids, len))
+	if (put_user(num_idents, &p->shmac_num_idents))
+		return -EFAULT;
+	if (copy_to_user(p->shmac_idents, hmacs->hmac_ids, data_len))
 		return -EFAULT;
-
 	return 0;
 }
 
@@ -5219,6 +5251,9 @@ static int sctp_getsockopt_active_key(struct sock *sk, int len,
 	struct sctp_authkeyid val;
 	struct sctp_association *asoc;
 
+	if (!sctp_auth_enable)
+		return -EACCES;
+
 	if (len < sizeof(struct sctp_authkeyid))
 		return -EINVAL;
 	if (copy_from_user(&val, optval, sizeof(struct sctp_authkeyid)))
@@ -5233,6 +5268,12 @@ static int sctp_getsockopt_active_key(struct sock *sk, int len,
 	else
 		val.scact_keynumber = sctp_sk(sk)->ep->active_key_id;
 
+	len = sizeof(struct sctp_authkeyid);
+	if (put_user(len, optlen))
+		return -EFAULT;
+	if (copy_to_user(optval, &val, len))
+		return -EFAULT;
+
 	return 0;
 }
 
@@ -5243,13 +5284,16 @@ static int sctp_getsockopt_peer_auth_chunks(struct sock *sk, int len,
 	struct sctp_authchunks val;
 	struct sctp_association *asoc;
 	struct sctp_chunks_param *ch;
-	u32    num_chunks;
+	u32    num_chunks = 0;
 	char __user *to;
 
-	if (len <= sizeof(struct sctp_authchunks))
+	if (!sctp_auth_enable)
+		return -EACCES;
+
+	if (len < sizeof(struct sctp_authchunks))
 		return -EINVAL;
 
-	if (copy_from_user(&val, p, sizeof(struct sctp_authchunks)))
+	if (copy_from_user(&val, optval, sizeof(struct sctp_authchunks)))
 		return -EFAULT;
 
 	to = p->gauth_chunks;
@@ -5258,20 +5302,21 @@ static int sctp_getsockopt_peer_auth_chunks(struct sock *sk, int len,
 		return -EINVAL;
 
 	ch = asoc->peer.peer_chunks;
+	if (!ch)
+		goto num;
 
 	/* See if the user provided enough room for all the data */
 	num_chunks = ntohs(ch->param_hdr.length) - sizeof(sctp_paramhdr_t);
 	if (len < num_chunks)
 		return -EINVAL;
 
-	len = num_chunks;
-	if (put_user(len, optlen))
+	if (copy_to_user(to, ch->chunks, num_chunks))
 		return -EFAULT;
+num:
+	len = sizeof(struct sctp_authchunks) + num_chunks;
+	if (put_user(len, optlen)) return -EFAULT;
 	if (put_user(num_chunks, &p->gauth_number_of_chunks))
 		return -EFAULT;
-	if (copy_to_user(to, ch->chunks, len))
-		return -EFAULT;
-
 	return 0;
 }
 
@@ -5282,13 +5327,16 @@ static int sctp_getsockopt_local_auth_chunks(struct sock *sk, int len,
 	struct sctp_authchunks val;
 	struct sctp_association *asoc;
 	struct sctp_chunks_param *ch;
-	u32    num_chunks;
+	u32    num_chunks = 0;
 	char __user *to;
 
-	if (len <= sizeof(struct sctp_authchunks))
+	if (!sctp_auth_enable)
+		return -EACCES;
+
+	if (len < sizeof(struct sctp_authchunks))
 		return -EINVAL;
 
-	if (copy_from_user(&val, p, sizeof(struct sctp_authchunks)))
+	if (copy_from_user(&val, optval, sizeof(struct sctp_authchunks)))
 		return -EFAULT;
 
 	to = p->gauth_chunks;
@@ -5301,17 +5349,21 @@ static int sctp_getsockopt_local_auth_chunks(struct sock *sk, int len,
 	else
 		ch = sctp_sk(sk)->ep->auth_chunk_list;
 
+	if (!ch)
+		goto num;
+
 	num_chunks = ntohs(ch->param_hdr.length) - sizeof(sctp_paramhdr_t);
-	if (len < num_chunks)
+	if (len < sizeof(struct sctp_authchunks) + num_chunks)
 		return -EINVAL;
 
-	len = num_chunks;
+	if (copy_to_user(to, ch->chunks, num_chunks))
+		return -EFAULT;
+num:
+	len = sizeof(struct sctp_authchunks) + num_chunks;
 	if (put_user(len, optlen))
 		return -EFAULT;
 	if (put_user(num_chunks, &p->gauth_number_of_chunks))
 		return -EFAULT;
-	if (copy_to_user(to, ch->chunks, len))
-		return -EFAULT;
 
 	return 0;
 }
diff --git a/net/socket.c b/net/socket.c
index 1310a82cbba7..8ef8ba81b9e2 100644
--- a/net/socket.c
+++ b/net/socket.c
@@ -265,7 +265,7 @@ static void sock_destroy_inode(struct inode *inode)
 			container_of(inode, struct socket_alloc, vfs_inode));
 }
 
-static void init_once(struct kmem_cache *cachep, void *foo)
+static void init_once(void *foo)
 {
 	struct socket_alloc *ei = (struct socket_alloc *)foo;
 
diff --git a/net/sunrpc/rpc_pipe.c b/net/sunrpc/rpc_pipe.c
index 5a9b0e7828cd..23a2b8f6dc49 100644
--- a/net/sunrpc/rpc_pipe.c
+++ b/net/sunrpc/rpc_pipe.c
@@ -897,7 +897,7 @@ static struct file_system_type rpc_pipe_fs_type = {
 };
 
 static void
-init_once(struct kmem_cache * cachep, void *foo)
+init_once(void *foo)
 {
 	struct rpc_inode *rpci = (struct rpc_inode *) foo;
 
diff --git a/net/sunrpc/svc.c b/net/sunrpc/svc.c
index 835d27413083..5a32cb7c4bb4 100644
--- a/net/sunrpc/svc.c
+++ b/net/sunrpc/svc.c
@@ -310,8 +310,7 @@ svc_pool_map_set_cpumask(struct task_struct *task, unsigned int pidx)
 	switch (m->mode) {
 	case SVC_POOL_PERCPU:
 	{
-		cpumask_of_cpu_ptr(cpumask, node);
-		set_cpus_allowed_ptr(task, cpumask);
+		set_cpus_allowed_ptr(task, &cpumask_of_cpu(node));
 		break;
 	}
 	case SVC_POOL_PERNODE:
diff --git a/net/sunrpc/sysctl.c b/net/sunrpc/sysctl.c
index 0f8c439b848a..5231f7aaac0e 100644
--- a/net/sunrpc/sysctl.c
+++ b/net/sunrpc/sysctl.c
@@ -60,24 +60,14 @@ static int proc_do_xprt(ctl_table *table, int write, struct file *file,
 			void __user *buffer, size_t *lenp, loff_t *ppos)
 {
 	char tmpbuf[256];
-	int len;
+	size_t len;
+
 	if ((*ppos && !write) || !*lenp) {
 		*lenp = 0;
 		return 0;
 	}
-	if (write)
-		return -EINVAL;
-	else {
-		len = svc_print_xprts(tmpbuf, sizeof(tmpbuf));
-		if (!access_ok(VERIFY_WRITE, buffer, len))
-			return -EFAULT;
-
-		if (__copy_to_user(buffer, tmpbuf, len))
-			return -EFAULT;
-	}
-	*lenp -= len;
-	*ppos += len;
-	return 0;
+	len = svc_print_xprts(tmpbuf, sizeof(tmpbuf));
+	return simple_read_from_buffer(buffer, *lenp, ppos, tmpbuf, len);
 }
 
 static int
diff --git a/net/sunrpc/xprtrdma/svc_rdma_recvfrom.c b/net/sunrpc/xprtrdma/svc_rdma_recvfrom.c
index b4b17f44cb29..74de31a06616 100644
--- a/net/sunrpc/xprtrdma/svc_rdma_recvfrom.c
+++ b/net/sunrpc/xprtrdma/svc_rdma_recvfrom.c
@@ -443,18 +443,18 @@ int svc_rdma_recvfrom(struct svc_rqst *rqstp)
 
 	dprintk("svcrdma: rqstp=%p\n", rqstp);
 
-	spin_lock_bh(&rdma_xprt->sc_read_complete_lock);
+	spin_lock_bh(&rdma_xprt->sc_rq_dto_lock);
 	if (!list_empty(&rdma_xprt->sc_read_complete_q)) {
 		ctxt = list_entry(rdma_xprt->sc_read_complete_q.next,
 				  struct svc_rdma_op_ctxt,
 				  dto_q);
 		list_del_init(&ctxt->dto_q);
 	}
-	spin_unlock_bh(&rdma_xprt->sc_read_complete_lock);
-	if (ctxt)
+	if (ctxt) {
+		spin_unlock_bh(&rdma_xprt->sc_rq_dto_lock);
 		return rdma_read_complete(rqstp, ctxt);
+	}
 
-	spin_lock_bh(&rdma_xprt->sc_rq_dto_lock);
 	if (!list_empty(&rdma_xprt->sc_rq_dto_q)) {
 		ctxt = list_entry(rdma_xprt->sc_rq_dto_q.next,
 				  struct svc_rdma_op_ctxt,
diff --git a/net/sunrpc/xprtrdma/svc_rdma_sendto.c b/net/sunrpc/xprtrdma/svc_rdma_sendto.c
index a19b22b452a3..84d328329d98 100644
--- a/net/sunrpc/xprtrdma/svc_rdma_sendto.c
+++ b/net/sunrpc/xprtrdma/svc_rdma_sendto.c
@@ -169,7 +169,8 @@ static int send_write(struct svcxprt_rdma *xprt, struct svc_rqst *rqstp,
 					  (void *)
 					  vec->sge[xdr_sge_no].iov_base + sge_off,
 					  sge_bytes, DMA_TO_DEVICE);
-		if (dma_mapping_error(sge[sge_no].addr))
+		if (dma_mapping_error(xprt->sc_cm_id->device->dma_device,
+					sge[sge_no].addr))
 			goto err;
 		sge_off = 0;
 		sge_no++;
diff --git a/net/sunrpc/xprtrdma/svc_rdma_transport.c b/net/sunrpc/xprtrdma/svc_rdma_transport.c
index 19ddc382b777..900cb69728c6 100644
--- a/net/sunrpc/xprtrdma/svc_rdma_transport.c
+++ b/net/sunrpc/xprtrdma/svc_rdma_transport.c
@@ -359,11 +359,11 @@ static void sq_cq_reap(struct svcxprt_rdma *xprt)
 			if (test_bit(RDMACTXT_F_LAST_CTXT, &ctxt->flags)) {
 				struct svc_rdma_op_ctxt *read_hdr = ctxt->read_hdr;
 				BUG_ON(!read_hdr);
+				spin_lock_bh(&xprt->sc_rq_dto_lock);
 				set_bit(XPT_DATA, &xprt->sc_xprt.xpt_flags);
-				spin_lock_bh(&xprt->sc_read_complete_lock);
 				list_add_tail(&read_hdr->dto_q,
 					      &xprt->sc_read_complete_q);
-				spin_unlock_bh(&xprt->sc_read_complete_lock);
+				spin_unlock_bh(&xprt->sc_rq_dto_lock);
 				svc_xprt_enqueue(&xprt->sc_xprt);
 			}
 			svc_rdma_put_context(ctxt, 0);
@@ -428,7 +428,6 @@ static struct svcxprt_rdma *rdma_create_xprt(struct svc_serv *serv,
 	init_waitqueue_head(&cma_xprt->sc_send_wait);
 
 	spin_lock_init(&cma_xprt->sc_lock);
-	spin_lock_init(&cma_xprt->sc_read_complete_lock);
 	spin_lock_init(&cma_xprt->sc_rq_dto_lock);
 
 	cma_xprt->sc_ord = svcrdma_ord;
diff --git a/net/sysctl_net.c b/net/sysctl_net.c
index 007c1a6708ee..972201cd5fa7 100644
--- a/net/sysctl_net.c
+++ b/net/sysctl_net.c
@@ -29,23 +29,35 @@
 #include <linux/if_tr.h>
 #endif
 
-static struct list_head *
+static struct ctl_table_set *
 net_ctl_header_lookup(struct ctl_table_root *root, struct nsproxy *namespaces)
 {
-	return &namespaces->net_ns->sysctl_table_headers;
+	return &namespaces->net_ns->sysctls;
 }
 
-static struct ctl_table_root net_sysctl_root = {
-	.lookup = net_ctl_header_lookup,
-};
+static int is_seen(struct ctl_table_set *set)
+{
+	return &current->nsproxy->net_ns->sysctls == set;
+}
 
-static LIST_HEAD(net_sysctl_ro_tables);
-static struct list_head *net_ctl_ro_header_lookup(struct ctl_table_root *root,
-		struct nsproxy *namespaces)
+/* Return standard mode bits for table entry. */
+static int net_ctl_permissions(struct ctl_table_root *root,
+			       struct nsproxy *nsproxy,
+			       struct ctl_table *table)
 {
-	return &net_sysctl_ro_tables;
+	/* Allow network administrator to have same access as root. */
+	if (capable(CAP_NET_ADMIN)) {
+		int mode = (table->mode >> 6) & 7;
+		return (mode << 6) | (mode << 3) | mode;
+	}
+	return table->mode;
 }
 
+static struct ctl_table_root net_sysctl_root = {
+	.lookup = net_ctl_header_lookup,
+	.permissions = net_ctl_permissions,
+};
+
 static int net_ctl_ro_header_perms(struct ctl_table_root *root,
 		struct nsproxy *namespaces, struct ctl_table *table)
 {
@@ -56,19 +68,20 @@ static int net_ctl_ro_header_perms(struct ctl_table_root *root,
 }
 
 static struct ctl_table_root net_sysctl_ro_root = {
-	.lookup = net_ctl_ro_header_lookup,
 	.permissions = net_ctl_ro_header_perms,
 };
 
 static int sysctl_net_init(struct net *net)
 {
-	INIT_LIST_HEAD(&net->sysctl_table_headers);
+	setup_sysctl_set(&net->sysctls,
+			 &net_sysctl_ro_root.default_set,
+			 is_seen);
 	return 0;
 }
 
 static void sysctl_net_exit(struct net *net)
 {
-	WARN_ON(!list_empty(&net->sysctl_table_headers));
+	WARN_ON(!list_empty(&net->sysctls.list));
 	return;
 }
 
@@ -84,6 +97,7 @@ static __init int sysctl_init(void)
 	if (ret)
 		goto out;
 	register_sysctl_root(&net_sysctl_root);
+	setup_sysctl_set(&net_sysctl_ro_root.default_set, NULL, NULL);
 	register_sysctl_root(&net_sysctl_ro_root);
 out:
 	return ret;
diff --git a/net/tipc/bcast.c b/net/tipc/bcast.c
index b1ff16aa4bdb..3ddaff42d1bb 100644
--- a/net/tipc/bcast.c
+++ b/net/tipc/bcast.c
@@ -96,8 +96,8 @@ struct bcbearer {
 	struct media media;
 	struct bcbearer_pair bpairs[MAX_BEARERS];
 	struct bcbearer_pair bpairs_temp[TIPC_MAX_LINK_PRI + 1];
-	struct node_map remains;
-	struct node_map remains_new;
+	struct tipc_node_map remains;
+	struct tipc_node_map remains_new;
 };
 
 /**
@@ -110,7 +110,7 @@ struct bcbearer {
 
 struct bclink {
 	struct link link;
-	struct node node;
+	struct tipc_node node;
 };
 
 
@@ -149,7 +149,7 @@ static void bcbuf_decr_acks(struct sk_buff *buf)
  * Called with 'node' locked, bc_lock unlocked
  */
 
-static void bclink_set_gap(struct node *n_ptr)
+static void bclink_set_gap(struct tipc_node *n_ptr)
 {
 	struct sk_buff *buf = n_ptr->bclink.deferred_head;
 
@@ -202,7 +202,7 @@ static void bclink_retransmit_pkt(u32 after, u32 to)
  * Node is locked, bc_lock unlocked.
  */
 
-void tipc_bclink_acknowledge(struct node *n_ptr, u32 acked)
+void tipc_bclink_acknowledge(struct tipc_node *n_ptr, u32 acked)
 {
 	struct sk_buff *crs;
 	struct sk_buff *next;
@@ -250,7 +250,7 @@ void tipc_bclink_acknowledge(struct node *n_ptr, u32 acked)
  * tipc_net_lock and node lock set
  */
 
-static void bclink_send_ack(struct node *n_ptr)
+static void bclink_send_ack(struct tipc_node *n_ptr)
 {
 	struct link *l_ptr = n_ptr->active_links[n_ptr->addr & 1];
 
@@ -264,7 +264,7 @@ static void bclink_send_ack(struct node *n_ptr)
  * tipc_net_lock and node lock set
  */
 
-static void bclink_send_nack(struct node *n_ptr)
+static void bclink_send_nack(struct tipc_node *n_ptr)
 {
 	struct sk_buff *buf;
 	struct tipc_msg *msg;
@@ -308,7 +308,7 @@ static void bclink_send_nack(struct node *n_ptr)
  * tipc_net_lock and node lock set
  */
 
-void tipc_bclink_check_gap(struct node *n_ptr, u32 last_sent)
+void tipc_bclink_check_gap(struct tipc_node *n_ptr, u32 last_sent)
 {
 	if (!n_ptr->bclink.supported ||
 	    less_eq(last_sent, mod(n_ptr->bclink.last_in)))
@@ -328,7 +328,7 @@ void tipc_bclink_check_gap(struct node *n_ptr, u32 last_sent)
 
 static void tipc_bclink_peek_nack(u32 dest, u32 sender_tag, u32 gap_after, u32 gap_to)
 {
-	struct node *n_ptr = tipc_node_find(dest);
+	struct tipc_node *n_ptr = tipc_node_find(dest);
 	u32 my_after, my_to;
 
 	if (unlikely(!n_ptr || !tipc_node_is_up(n_ptr)))
@@ -418,7 +418,7 @@ void tipc_bclink_recv_pkt(struct sk_buff *buf)
 	static int rx_count = 0;
 #endif
 	struct tipc_msg *msg = buf_msg(buf);
-	struct node* node = tipc_node_find(msg_prevnode(msg));
+	struct tipc_node* node = tipc_node_find(msg_prevnode(msg));
 	u32 next_in;
 	u32 seqno;
 	struct sk_buff *deferred;
@@ -538,7 +538,7 @@ u32 tipc_bclink_get_last_sent(void)
 	return last_sent;
 }
 
-u32 tipc_bclink_acks_missing(struct node *n_ptr)
+u32 tipc_bclink_acks_missing(struct tipc_node *n_ptr)
 {
 	return (n_ptr->bclink.supported &&
 		(tipc_bclink_get_last_sent() != n_ptr->bclink.acked));
diff --git a/net/tipc/bcast.h b/net/tipc/bcast.h
index a2416fa6b906..5aa024b99c55 100644
--- a/net/tipc/bcast.h
+++ b/net/tipc/bcast.h
@@ -41,12 +41,12 @@
 #define WSIZE 32
 
 /**
- * struct node_map - set of node identifiers
+ * struct tipc_node_map - set of node identifiers
  * @count: # of nodes in set
  * @map: bitmap of node identifiers that are in the set
  */
 
-struct node_map {
+struct tipc_node_map {
 	u32 count;
 	u32 map[MAX_NODES / WSIZE];
 };
@@ -68,7 +68,7 @@ struct port_list {
 };
 
 
-struct node;
+struct tipc_node;
 
 extern char tipc_bclink_name[];
 
@@ -77,7 +77,7 @@ extern char tipc_bclink_name[];
  * nmap_add - add a node to a node map
  */
 
-static inline void tipc_nmap_add(struct node_map *nm_ptr, u32 node)
+static inline void tipc_nmap_add(struct tipc_node_map *nm_ptr, u32 node)
 {
 	int n = tipc_node(node);
 	int w = n / WSIZE;
@@ -93,7 +93,7 @@ static inline void tipc_nmap_add(struct node_map *nm_ptr, u32 node)
  * nmap_remove - remove a node from a node map
  */
 
-static inline void tipc_nmap_remove(struct node_map *nm_ptr, u32 node)
+static inline void tipc_nmap_remove(struct tipc_node_map *nm_ptr, u32 node)
 {
 	int n = tipc_node(node);
 	int w = n / WSIZE;
@@ -109,7 +109,7 @@ static inline void tipc_nmap_remove(struct node_map *nm_ptr, u32 node)
  * nmap_equal - test for equality of node maps
  */
 
-static inline int tipc_nmap_equal(struct node_map *nm_a, struct node_map *nm_b)
+static inline int tipc_nmap_equal(struct tipc_node_map *nm_a, struct tipc_node_map *nm_b)
 {
 	return !memcmp(nm_a, nm_b, sizeof(*nm_a));
 }
@@ -121,8 +121,8 @@ static inline int tipc_nmap_equal(struct node_map *nm_a, struct node_map *nm_b)
  * @nm_diff: output node map A-B (i.e. nodes of A that are not in B)
  */
 
-static inline void tipc_nmap_diff(struct node_map *nm_a, struct node_map *nm_b,
-				  struct node_map *nm_diff)
+static inline void tipc_nmap_diff(struct tipc_node_map *nm_a, struct tipc_node_map *nm_b,
+				  struct tipc_node_map *nm_diff)
 {
 	int stop = sizeof(nm_a->map) / sizeof(u32);
 	int w;
@@ -195,12 +195,12 @@ static inline void tipc_port_list_free(struct port_list *pl_ptr)
 
 int  tipc_bclink_init(void);
 void tipc_bclink_stop(void);
-void tipc_bclink_acknowledge(struct node *n_ptr, u32 acked);
+void tipc_bclink_acknowledge(struct tipc_node *n_ptr, u32 acked);
 int  tipc_bclink_send_msg(struct sk_buff *buf);
 void tipc_bclink_recv_pkt(struct sk_buff *buf);
 u32  tipc_bclink_get_last_sent(void);
-u32  tipc_bclink_acks_missing(struct node *n_ptr);
-void tipc_bclink_check_gap(struct node *n_ptr, u32 seqno);
+u32  tipc_bclink_acks_missing(struct tipc_node *n_ptr);
+void tipc_bclink_check_gap(struct tipc_node *n_ptr, u32 seqno);
 int  tipc_bclink_stats(char *stats_buf, const u32 buf_size);
 int  tipc_bclink_reset_stats(void);
 int  tipc_bclink_set_queue_limits(u32 limit);
diff --git a/net/tipc/bearer.c b/net/tipc/bearer.c
index 6a9aba3edd08..a7a36779b9b3 100644
--- a/net/tipc/bearer.c
+++ b/net/tipc/bearer.c
@@ -599,7 +599,7 @@ int tipc_block_bearer(const char *name)
 	spin_lock_bh(&b_ptr->publ.lock);
 	b_ptr->publ.blocked = 1;
 	list_for_each_entry_safe(l_ptr, temp_l_ptr, &b_ptr->links, link_list) {
-		struct node *n_ptr = l_ptr->owner;
+		struct tipc_node *n_ptr = l_ptr->owner;
 
 		spin_lock_bh(&n_ptr->lock);
 		tipc_link_reset(l_ptr);
diff --git a/net/tipc/bearer.h b/net/tipc/bearer.h
index 6a36b6600e6c..ca5734892713 100644
--- a/net/tipc/bearer.h
+++ b/net/tipc/bearer.h
@@ -104,7 +104,7 @@ struct bearer {
 	u32 continue_count;
 	int active;
 	char net_plane;
-	struct node_map nodes;
+	struct tipc_node_map nodes;
 };
 
 struct bearer_name {
diff --git a/net/tipc/cluster.c b/net/tipc/cluster.c
index 46ee6c58532d..689fdefe9d04 100644
--- a/net/tipc/cluster.c
+++ b/net/tipc/cluster.c
@@ -48,8 +48,8 @@ static void tipc_cltr_multicast(struct cluster *c_ptr, struct sk_buff *buf,
 				u32 lower, u32 upper);
 static struct sk_buff *tipc_cltr_prepare_routing_msg(u32 data_size, u32 dest);
 
-struct node **tipc_local_nodes = NULL;
-struct node_map tipc_cltr_bcast_nodes = {0,{0,}};
+struct tipc_node **tipc_local_nodes = NULL;
+struct tipc_node_map tipc_cltr_bcast_nodes = {0,{0,}};
 u32 tipc_highest_allowed_slave = 0;
 
 struct cluster *tipc_cltr_create(u32 addr)
@@ -115,7 +115,7 @@ void tipc_cltr_delete(struct cluster *c_ptr)
 
 u32 tipc_cltr_next_node(struct cluster *c_ptr, u32 addr)
 {
-	struct node *n_ptr;
+	struct tipc_node *n_ptr;
 	u32 n_num = tipc_node(addr) + 1;
 
 	if (!c_ptr)
@@ -133,7 +133,7 @@ u32 tipc_cltr_next_node(struct cluster *c_ptr, u32 addr)
 	return 0;
 }
 
-void tipc_cltr_attach_node(struct cluster *c_ptr, struct node *n_ptr)
+void tipc_cltr_attach_node(struct cluster *c_ptr, struct tipc_node *n_ptr)
 {
 	u32 n_num = tipc_node(n_ptr->addr);
 	u32 max_n_num = tipc_max_nodes;
@@ -196,7 +196,7 @@ u32 tipc_cltr_select_router(struct cluster *c_ptr, u32 ref)
  * Uses deterministic and fair algorithm.
  */
 
-struct node *tipc_cltr_select_node(struct cluster *c_ptr, u32 selector)
+struct tipc_node *tipc_cltr_select_node(struct cluster *c_ptr, u32 selector)
 {
 	u32 n_num;
 	u32 mask = tipc_max_nodes;
@@ -379,7 +379,7 @@ void tipc_cltr_recv_routing_table(struct sk_buff *buf)
 {
 	struct tipc_msg *msg = buf_msg(buf);
 	struct cluster *c_ptr;
-	struct node *n_ptr;
+	struct tipc_node *n_ptr;
 	unchar *node_table;
 	u32 table_size;
 	u32 router;
@@ -499,7 +499,7 @@ static void tipc_cltr_multicast(struct cluster *c_ptr, struct sk_buff *buf,
 			 u32 lower, u32 upper)
 {
 	struct sk_buff *buf_copy;
-	struct node *n_ptr;
+	struct tipc_node *n_ptr;
 	u32 n_num;
 	u32 tstop;
 
@@ -534,7 +534,7 @@ void tipc_cltr_broadcast(struct sk_buff *buf)
 {
 	struct sk_buff *buf_copy;
 	struct cluster *c_ptr;
-	struct node *n_ptr;
+	struct tipc_node *n_ptr;
 	u32 n_num;
 	u32 tstart;
 	u32 tstop;
diff --git a/net/tipc/cluster.h b/net/tipc/cluster.h
index 62df074afaec..333efb0b9c44 100644
--- a/net/tipc/cluster.h
+++ b/net/tipc/cluster.h
@@ -54,24 +54,24 @@
 struct cluster {
 	u32 addr;
 	struct _zone *owner;
-	struct node **nodes;
+	struct tipc_node **nodes;
 	u32 highest_node;
 	u32 highest_slave;
 };
 
 
-extern struct node **tipc_local_nodes;
+extern struct tipc_node **tipc_local_nodes;
 extern u32 tipc_highest_allowed_slave;
-extern struct node_map tipc_cltr_bcast_nodes;
+extern struct tipc_node_map tipc_cltr_bcast_nodes;
 
 void tipc_cltr_remove_as_router(struct cluster *c_ptr, u32 router);
 void tipc_cltr_send_ext_routes(struct cluster *c_ptr, u32 dest);
-struct node *tipc_cltr_select_node(struct cluster *c_ptr, u32 selector);
+struct tipc_node *tipc_cltr_select_node(struct cluster *c_ptr, u32 selector);
 u32 tipc_cltr_select_router(struct cluster *c_ptr, u32 ref);
 void tipc_cltr_recv_routing_table(struct sk_buff *buf);
 struct cluster *tipc_cltr_create(u32 addr);
 void tipc_cltr_delete(struct cluster *c_ptr);
-void tipc_cltr_attach_node(struct cluster *c_ptr, struct node *n_ptr);
+void tipc_cltr_attach_node(struct cluster *c_ptr, struct tipc_node *n_ptr);
 void tipc_cltr_send_slave_routes(struct cluster *c_ptr, u32 dest);
 void tipc_cltr_broadcast(struct sk_buff *buf);
 int tipc_cltr_init(void);
diff --git a/net/tipc/discover.c b/net/tipc/discover.c
index 1657f0e795ff..74b7d1e28aec 100644
--- a/net/tipc/discover.c
+++ b/net/tipc/discover.c
@@ -193,7 +193,7 @@ void tipc_disc_recv_msg(struct sk_buff *buf, struct bearer *b_ptr)
 		/* Always accept link here */
 		struct sk_buff *rbuf;
 		struct tipc_media_addr *addr;
-		struct node *n_ptr = tipc_node_find(orig);
+		struct tipc_node *n_ptr = tipc_node_find(orig);
 		int link_fully_up;
 
 		dbg(" in own cluster\n");
diff --git a/net/tipc/link.c b/net/tipc/link.c
index d60113ba4b1b..dd4c18b9a35b 100644
--- a/net/tipc/link.c
+++ b/net/tipc/link.c
@@ -1155,7 +1155,7 @@ int tipc_link_send_buf(struct link *l_ptr, struct sk_buff *buf)
 int tipc_link_send(struct sk_buff *buf, u32 dest, u32 selector)
 {
 	struct link *l_ptr;
-	struct node *n_ptr;
+	struct tipc_node *n_ptr;
 	int res = -ELINKCONG;
 
 	read_lock_bh(&tipc_net_lock);
@@ -1226,7 +1226,7 @@ static int link_send_buf_fast(struct link *l_ptr, struct sk_buff *buf,
 int tipc_send_buf_fast(struct sk_buff *buf, u32 destnode)
 {
 	struct link *l_ptr;
-	struct node *n_ptr;
+	struct tipc_node *n_ptr;
 	int res;
 	u32 selector = msg_origport(buf_msg(buf)) & 1;
 	u32 dummy;
@@ -1270,7 +1270,7 @@ int tipc_link_send_sections_fast(struct port *sender,
 	struct tipc_msg *hdr = &sender->publ.phdr;
 	struct link *l_ptr;
 	struct sk_buff *buf;
-	struct node *node;
+	struct tipc_node *node;
 	int res;
 	u32 selector = msg_origport(hdr) & 1;
 
@@ -1364,7 +1364,7 @@ static int link_send_sections_long(struct port *sender,
 				   u32 destaddr)
 {
 	struct link *l_ptr;
-	struct node *node;
+	struct tipc_node *node;
 	struct tipc_msg *hdr = &sender->publ.phdr;
 	u32 dsz = msg_data_sz(hdr);
 	u32 max_pkt,fragm_sz,rest;
@@ -1636,7 +1636,7 @@ void tipc_link_push_queue(struct link *l_ptr)
 
 static void link_reset_all(unsigned long addr)
 {
-	struct node *n_ptr;
+	struct tipc_node *n_ptr;
 	char addr_string[16];
 	u32 i;
 
@@ -1682,7 +1682,7 @@ static void link_retransmit_failure(struct link *l_ptr, struct sk_buff *buf)
 
 		/* Handle failure on broadcast link */
 
-		struct node *n_ptr;
+		struct tipc_node *n_ptr;
 		char addr_string[16];
 
 		tipc_printf(TIPC_OUTPUT, "Msg seq number: %u,  ", msg_seqno(msg));
@@ -1843,7 +1843,7 @@ void tipc_recv_msg(struct sk_buff *head, struct tipc_bearer *tb_ptr)
 	read_lock_bh(&tipc_net_lock);
 	while (head) {
 		struct bearer *b_ptr = (struct bearer *)tb_ptr;
-		struct node *n_ptr;
+		struct tipc_node *n_ptr;
 		struct link *l_ptr;
 		struct sk_buff *crs;
 		struct sk_buff *buf = head;
@@ -2935,7 +2935,7 @@ void tipc_link_set_queue_limits(struct link *l_ptr, u32 window)
  * Returns pointer to link (or 0 if invalid link name).
  */
 
-static struct link *link_find_link(const char *name, struct node **node)
+static struct link *link_find_link(const char *name, struct tipc_node **node)
 {
 	struct link_name link_name_parts;
 	struct bearer *b_ptr;
@@ -2965,7 +2965,7 @@ struct sk_buff *tipc_link_cmd_config(const void *req_tlv_area, int req_tlv_space
 	struct tipc_link_config *args;
 	u32 new_value;
 	struct link *l_ptr;
-	struct node *node;
+	struct tipc_node *node;
 	int res;
 
 	if (!TLV_CHECK(req_tlv_area, req_tlv_space, TIPC_TLV_LINK_CONFIG))
@@ -3043,7 +3043,7 @@ struct sk_buff *tipc_link_cmd_reset_stats(const void *req_tlv_area, int req_tlv_
 {
 	char *link_name;
 	struct link *l_ptr;
-	struct node *node;
+	struct tipc_node *node;
 
 	if (!TLV_CHECK(req_tlv_area, req_tlv_space, TIPC_TLV_LINK_NAME))
 		return tipc_cfg_reply_error_string(TIPC_CFG_TLV_ERROR);
@@ -3091,7 +3091,7 @@ static int tipc_link_stats(const char *name, char *buf, const u32 buf_size)
 {
 	struct print_buf pb;
 	struct link *l_ptr;
-	struct node *node;
+	struct tipc_node *node;
 	char *status;
 	u32 profile_total = 0;
 
@@ -3207,7 +3207,7 @@ int link_control(const char *name, u32 op, u32 val)
 	int res = -EINVAL;
 	struct link *l_ptr;
 	u32 bearer_id;
-	struct node * node;
+	struct tipc_node * node;
 	u32 a;
 
 	a = link_name2addr(name, &bearer_id);
@@ -3249,7 +3249,7 @@ int link_control(const char *name, u32 op, u32 val)
 
 u32 tipc_link_get_max_pkt(u32 dest, u32 selector)
 {
-	struct node *n_ptr;
+	struct tipc_node *n_ptr;
 	struct link *l_ptr;
 	u32 res = MAX_PKT_DEFAULT;
 
diff --git a/net/tipc/link.h b/net/tipc/link.h
index 52f3e7c1871f..6a51e38ad25c 100644
--- a/net/tipc/link.h
+++ b/net/tipc/link.h
@@ -116,7 +116,7 @@ struct link {
 	char name[TIPC_MAX_LINK_NAME];
 	struct tipc_media_addr media_addr;
 	struct timer_list timer;
-	struct node *owner;
+	struct tipc_node *owner;
 	struct list_head link_list;
 
 	/* Management and link supervision data */
diff --git a/net/tipc/name_table.h b/net/tipc/name_table.h
index b9e7cd336d76..139882d4ed00 100644
--- a/net/tipc/name_table.h
+++ b/net/tipc/name_table.h
@@ -76,7 +76,7 @@ struct publication {
 	u32 node;
 	u32 ref;
 	u32 key;
-	struct node_subscr subscr;
+	struct tipc_node_subscr subscr;
 	struct list_head local_list;
 	struct list_head pport_list;
 	struct publication *node_list_next;
diff --git a/net/tipc/net.c b/net/tipc/net.c
index ec7b04fbdc43..7906608bf510 100644
--- a/net/tipc/net.c
+++ b/net/tipc/net.c
@@ -118,7 +118,7 @@
 DEFINE_RWLOCK(tipc_net_lock);
 struct network tipc_net = { NULL };
 
-struct node *tipc_net_select_remote_node(u32 addr, u32 ref)
+struct tipc_node *tipc_net_select_remote_node(u32 addr, u32 ref)
 {
 	return tipc_zone_select_remote_node(tipc_net.zones[tipc_zone(addr)], addr, ref);
 }
diff --git a/net/tipc/net.h b/net/tipc/net.h
index d154ac2bda9a..de2b9ad8f646 100644
--- a/net/tipc/net.h
+++ b/net/tipc/net.h
@@ -55,7 +55,7 @@ extern rwlock_t tipc_net_lock;
 void tipc_net_remove_as_router(u32 router);
 void tipc_net_send_external_routes(u32 dest);
 void tipc_net_route_msg(struct sk_buff *buf);
-struct node *tipc_net_select_remote_node(u32 addr, u32 ref);
+struct tipc_node *tipc_net_select_remote_node(u32 addr, u32 ref);
 u32 tipc_net_select_router(u32 addr, u32 ref);
 
 int tipc_net_start(u32 addr);
diff --git a/net/tipc/node.c b/net/tipc/node.c
index ee952ad60218..20d98c56e152 100644
--- a/net/tipc/node.c
+++ b/net/tipc/node.c
@@ -46,11 +46,11 @@
 #include "bearer.h"
 #include "name_distr.h"
 
-void node_print(struct print_buf *buf, struct node *n_ptr, char *str);
-static void node_lost_contact(struct node *n_ptr);
-static void node_established_contact(struct node *n_ptr);
+void node_print(struct print_buf *buf, struct tipc_node *n_ptr, char *str);
+static void node_lost_contact(struct tipc_node *n_ptr);
+static void node_established_contact(struct tipc_node *n_ptr);
 
-struct node *tipc_nodes = NULL;	/* sorted list of nodes within cluster */
+struct tipc_node *tipc_nodes = NULL;	/* sorted list of nodes within cluster */
 
 static DEFINE_SPINLOCK(node_create_lock);
 
@@ -66,11 +66,11 @@ u32 tipc_own_tag = 0;
  * but this is a non-trivial change.)
  */
 
-struct node *tipc_node_create(u32 addr)
+struct tipc_node *tipc_node_create(u32 addr)
 {
 	struct cluster *c_ptr;
-	struct node *n_ptr;
-	struct node **curr_node;
+	struct tipc_node *n_ptr;
+	struct tipc_node **curr_node;
 
 	spin_lock_bh(&node_create_lock);
 
@@ -120,7 +120,7 @@ struct node *tipc_node_create(u32 addr)
 	return n_ptr;
 }
 
-void tipc_node_delete(struct node *n_ptr)
+void tipc_node_delete(struct tipc_node *n_ptr)
 {
 	if (!n_ptr)
 		return;
@@ -146,7 +146,7 @@ void tipc_node_delete(struct node *n_ptr)
  * Link becomes active (alone or shared) or standby, depending on its priority.
  */
 
-void tipc_node_link_up(struct node *n_ptr, struct link *l_ptr)
+void tipc_node_link_up(struct tipc_node *n_ptr, struct link *l_ptr)
 {
 	struct link **active = &n_ptr->active_links[0];
 
@@ -180,7 +180,7 @@ void tipc_node_link_up(struct node *n_ptr, struct link *l_ptr)
  * node_select_active_links - select active link
  */
 
-static void node_select_active_links(struct node *n_ptr)
+static void node_select_active_links(struct tipc_node *n_ptr)
 {
 	struct link **active = &n_ptr->active_links[0];
 	u32 i;
@@ -208,7 +208,7 @@ static void node_select_active_links(struct node *n_ptr)
  * tipc_node_link_down - handle loss of link
  */
 
-void tipc_node_link_down(struct node *n_ptr, struct link *l_ptr)
+void tipc_node_link_down(struct tipc_node *n_ptr, struct link *l_ptr)
 {
 	struct link **active;
 
@@ -235,30 +235,30 @@ void tipc_node_link_down(struct node *n_ptr, struct link *l_ptr)
 		node_lost_contact(n_ptr);
 }
 
-int tipc_node_has_active_links(struct node *n_ptr)
+int tipc_node_has_active_links(struct tipc_node *n_ptr)
 {
 	return (n_ptr &&
 		((n_ptr->active_links[0]) || (n_ptr->active_links[1])));
 }
 
-int tipc_node_has_redundant_links(struct node *n_ptr)
+int tipc_node_has_redundant_links(struct tipc_node *n_ptr)
 {
 	return (n_ptr->working_links > 1);
 }
 
-static int tipc_node_has_active_routes(struct node *n_ptr)
+static int tipc_node_has_active_routes(struct tipc_node *n_ptr)
 {
 	return (n_ptr && (n_ptr->last_router >= 0));
 }
 
-int tipc_node_is_up(struct node *n_ptr)
+int tipc_node_is_up(struct tipc_node *n_ptr)
 {
 	return (tipc_node_has_active_links(n_ptr) || tipc_node_has_active_routes(n_ptr));
 }
 
-struct node *tipc_node_attach_link(struct link *l_ptr)
+struct tipc_node *tipc_node_attach_link(struct link *l_ptr)
 {
-	struct node *n_ptr = tipc_node_find(l_ptr->addr);
+	struct tipc_node *n_ptr = tipc_node_find(l_ptr->addr);
 
 	if (!n_ptr)
 		n_ptr = tipc_node_create(l_ptr->addr);
@@ -285,7 +285,7 @@ struct node *tipc_node_attach_link(struct link *l_ptr)
 	return NULL;
 }
 
-void tipc_node_detach_link(struct node *n_ptr, struct link *l_ptr)
+void tipc_node_detach_link(struct tipc_node *n_ptr, struct link *l_ptr)
 {
 	n_ptr->links[l_ptr->b_ptr->identity] = NULL;
 	tipc_net.zones[tipc_zone(l_ptr->addr)]->links--;
@@ -338,7 +338,7 @@ void tipc_node_detach_link(struct node *n_ptr, struct link *l_ptr)
  *
  */
 
-static void node_established_contact(struct node *n_ptr)
+static void node_established_contact(struct tipc_node *n_ptr)
 {
 	struct cluster *c_ptr;
 
@@ -384,10 +384,10 @@ static void node_established_contact(struct node *n_ptr)
 				  tipc_highest_allowed_slave);
 }
 
-static void node_lost_contact(struct node *n_ptr)
+static void node_lost_contact(struct tipc_node *n_ptr)
 {
 	struct cluster *c_ptr;
-	struct node_subscr *ns, *tns;
+	struct tipc_node_subscr *ns, *tns;
 	char addr_string[16];
 	u32 i;
 
@@ -466,9 +466,9 @@ static void node_lost_contact(struct node *n_ptr)
  * Called by when cluster local lookup has failed.
  */
 
-struct node *tipc_node_select_next_hop(u32 addr, u32 selector)
+struct tipc_node *tipc_node_select_next_hop(u32 addr, u32 selector)
 {
-	struct node *n_ptr;
+	struct tipc_node *n_ptr;
 	u32 router_addr;
 
 	if (!tipc_addr_domain_valid(addr))
@@ -513,7 +513,7 @@ struct node *tipc_node_select_next_hop(u32 addr, u32 selector)
  * Uses a deterministic and fair algorithm for selecting router node.
  */
 
-u32 tipc_node_select_router(struct node *n_ptr, u32 ref)
+u32 tipc_node_select_router(struct tipc_node *n_ptr, u32 ref)
 {
 	u32 ulim;
 	u32 mask;
@@ -551,7 +551,7 @@ u32 tipc_node_select_router(struct node *n_ptr, u32 ref)
 	return tipc_addr(own_zone(), own_cluster(), r);
 }
 
-void tipc_node_add_router(struct node *n_ptr, u32 router)
+void tipc_node_add_router(struct tipc_node *n_ptr, u32 router)
 {
 	u32 r_num = tipc_node(router);
 
@@ -562,7 +562,7 @@ void tipc_node_add_router(struct node *n_ptr, u32 router)
 	       !n_ptr->routers[n_ptr->last_router]);
 }
 
-void tipc_node_remove_router(struct node *n_ptr, u32 router)
+void tipc_node_remove_router(struct tipc_node *n_ptr, u32 router)
 {
 	u32 r_num = tipc_node(router);
 
@@ -580,7 +580,7 @@ void tipc_node_remove_router(struct node *n_ptr, u32 router)
 }
 
 #if 0
-void node_print(struct print_buf *buf, struct node *n_ptr, char *str)
+void node_print(struct print_buf *buf, struct tipc_node *n_ptr, char *str)
 {
 	u32 i;
 
@@ -597,7 +597,7 @@ void node_print(struct print_buf *buf, struct node *n_ptr, char *str)
 
 u32 tipc_available_nodes(const u32 domain)
 {
-	struct node *n_ptr;
+	struct tipc_node *n_ptr;
 	u32 cnt = 0;
 
 	read_lock_bh(&tipc_net_lock);
@@ -615,7 +615,7 @@ struct sk_buff *tipc_node_get_nodes(const void *req_tlv_area, int req_tlv_space)
 {
 	u32 domain;
 	struct sk_buff *buf;
-	struct node *n_ptr;
+	struct tipc_node *n_ptr;
 	struct tipc_node_info node_info;
 	u32 payload_size;
 
@@ -667,7 +667,7 @@ struct sk_buff *tipc_node_get_links(const void *req_tlv_area, int req_tlv_space)
 {
 	u32 domain;
 	struct sk_buff *buf;
-	struct node *n_ptr;
+	struct tipc_node *n_ptr;
 	struct tipc_link_info link_info;
 	u32 payload_size;
 
diff --git a/net/tipc/node.h b/net/tipc/node.h
index cd1882654bbb..6f990da5d143 100644
--- a/net/tipc/node.h
+++ b/net/tipc/node.h
@@ -43,7 +43,7 @@
 #include "bearer.h"
 
 /**
- * struct node - TIPC node structure
+ * struct tipc_node - TIPC node structure
  * @addr: network address of node
  * @lock: spinlock governing access to structure
  * @owner: pointer to cluster that node belongs to
@@ -68,11 +68,11 @@
  *    @defragm: list of partially reassembled b'cast message fragments from node
  */
 
-struct node {
+struct tipc_node {
 	u32 addr;
 	spinlock_t lock;
 	struct cluster *owner;
-	struct node *next;
+	struct tipc_node *next;
 	struct list_head nsub;
 	struct link *active_links[2];
 	struct link *links[MAX_BEARERS];
@@ -94,26 +94,26 @@ struct node {
 	} bclink;
 };
 
-extern struct node *tipc_nodes;
+extern struct tipc_node *tipc_nodes;
 extern u32 tipc_own_tag;
 
-struct node *tipc_node_create(u32 addr);
-void tipc_node_delete(struct node *n_ptr);
-struct node *tipc_node_attach_link(struct link *l_ptr);
-void tipc_node_detach_link(struct node *n_ptr, struct link *l_ptr);
-void tipc_node_link_down(struct node *n_ptr, struct link *l_ptr);
-void tipc_node_link_up(struct node *n_ptr, struct link *l_ptr);
-int tipc_node_has_active_links(struct node *n_ptr);
-int tipc_node_has_redundant_links(struct node *n_ptr);
-u32 tipc_node_select_router(struct node *n_ptr, u32 ref);
-struct node *tipc_node_select_next_hop(u32 addr, u32 selector);
-int tipc_node_is_up(struct node *n_ptr);
-void tipc_node_add_router(struct node *n_ptr, u32 router);
-void tipc_node_remove_router(struct node *n_ptr, u32 router);
+struct tipc_node *tipc_node_create(u32 addr);
+void tipc_node_delete(struct tipc_node *n_ptr);
+struct tipc_node *tipc_node_attach_link(struct link *l_ptr);
+void tipc_node_detach_link(struct tipc_node *n_ptr, struct link *l_ptr);
+void tipc_node_link_down(struct tipc_node *n_ptr, struct link *l_ptr);
+void tipc_node_link_up(struct tipc_node *n_ptr, struct link *l_ptr);
+int tipc_node_has_active_links(struct tipc_node *n_ptr);
+int tipc_node_has_redundant_links(struct tipc_node *n_ptr);
+u32 tipc_node_select_router(struct tipc_node *n_ptr, u32 ref);
+struct tipc_node *tipc_node_select_next_hop(u32 addr, u32 selector);
+int tipc_node_is_up(struct tipc_node *n_ptr);
+void tipc_node_add_router(struct tipc_node *n_ptr, u32 router);
+void tipc_node_remove_router(struct tipc_node *n_ptr, u32 router);
 struct sk_buff *tipc_node_get_links(const void *req_tlv_area, int req_tlv_space);
 struct sk_buff *tipc_node_get_nodes(const void *req_tlv_area, int req_tlv_space);
 
-static inline struct node *tipc_node_find(u32 addr)
+static inline struct tipc_node *tipc_node_find(u32 addr)
 {
 	if (likely(in_own_cluster(addr)))
 		return tipc_local_nodes[tipc_node(addr)];
@@ -126,19 +126,19 @@ static inline struct node *tipc_node_find(u32 addr)
 	return NULL;
 }
 
-static inline struct node *tipc_node_select(u32 addr, u32 selector)
+static inline struct tipc_node *tipc_node_select(u32 addr, u32 selector)
 {
 	if (likely(in_own_cluster(addr)))
 		return tipc_local_nodes[tipc_node(addr)];
 	return tipc_node_select_next_hop(addr, selector);
 }
 
-static inline void tipc_node_lock(struct node *n_ptr)
+static inline void tipc_node_lock(struct tipc_node *n_ptr)
 {
 	spin_lock_bh(&n_ptr->lock);
 }
 
-static inline void tipc_node_unlock(struct node *n_ptr)
+static inline void tipc_node_unlock(struct tipc_node *n_ptr)
 {
 	spin_unlock_bh(&n_ptr->lock);
 }
diff --git a/net/tipc/node_subscr.c b/net/tipc/node_subscr.c
index 8ecbd0fb6103..19194d476a9e 100644
--- a/net/tipc/node_subscr.c
+++ b/net/tipc/node_subscr.c
@@ -44,7 +44,7 @@
  * tipc_nodesub_subscribe - create "node down" subscription for specified node
  */
 
-void tipc_nodesub_subscribe(struct node_subscr *node_sub, u32 addr,
+void tipc_nodesub_subscribe(struct tipc_node_subscr *node_sub, u32 addr,
 		       void *usr_handle, net_ev_handler handle_down)
 {
 	if (addr == tipc_own_addr) {
@@ -69,7 +69,7 @@ void tipc_nodesub_subscribe(struct node_subscr *node_sub, u32 addr,
  * tipc_nodesub_unsubscribe - cancel "node down" subscription (if any)
  */
 
-void tipc_nodesub_unsubscribe(struct node_subscr *node_sub)
+void tipc_nodesub_unsubscribe(struct tipc_node_subscr *node_sub)
 {
 	if (!node_sub->node)
 		return;
diff --git a/net/tipc/node_subscr.h b/net/tipc/node_subscr.h
index 5f3f5859b84c..006ed739f515 100644
--- a/net/tipc/node_subscr.h
+++ b/net/tipc/node_subscr.h
@@ -42,22 +42,22 @@
 typedef void (*net_ev_handler) (void *usr_handle);
 
 /**
- * struct node_subscr - "node down" subscription entry
+ * struct tipc_node_subscr - "node down" subscription entry
  * @node: ptr to node structure of interest (or NULL, if none)
  * @handle_node_down: routine to invoke when node fails
  * @usr_handle: argument to pass to routine when node fails
  * @nodesub_list: adjacent entries in list of subscriptions for the node
  */
 
-struct node_subscr {
-	struct node *node;
+struct tipc_node_subscr {
+	struct tipc_node *node;
 	net_ev_handler handle_node_down;
 	void *usr_handle;
 	struct list_head nodesub_list;
 };
 
-void tipc_nodesub_subscribe(struct node_subscr *node_sub, u32 addr,
+void tipc_nodesub_subscribe(struct tipc_node_subscr *node_sub, u32 addr,
 			    void *usr_handle, net_ev_handler handle_down);
-void tipc_nodesub_unsubscribe(struct node_subscr *node_sub);
+void tipc_nodesub_unsubscribe(struct tipc_node_subscr *node_sub);
 
 #endif
diff --git a/net/tipc/port.h b/net/tipc/port.h
index e5f8c16429bd..ff31ee4a1dc3 100644
--- a/net/tipc/port.h
+++ b/net/tipc/port.h
@@ -105,7 +105,7 @@ struct port {
 	u32 probing_interval;
 	u32 last_in_seqno;
 	struct timer_list timer;
-	struct node_subscr subscription;
+	struct tipc_node_subscr subscription;
 };
 
 extern spinlock_t tipc_port_list_lock;
diff --git a/net/tipc/subscr.c b/net/tipc/subscr.c
index 0326d3060bc7..0747d8a9232f 100644
--- a/net/tipc/subscr.c
+++ b/net/tipc/subscr.c
@@ -85,7 +85,7 @@ static struct top_srv topsrv = { 0 };
 
 static u32 htohl(u32 in, int swap)
 {
-	return swap ? (u32)___constant_swab32(in) : in;
+	return swap ? swab32(in) : in;
 }
 
 /**
diff --git a/net/tipc/zone.c b/net/tipc/zone.c
index 3506f8563441..2c01ba2d86bf 100644
--- a/net/tipc/zone.c
+++ b/net/tipc/zone.c
@@ -111,10 +111,10 @@ void tipc_zone_send_external_routes(struct _zone *z_ptr, u32 dest)
 	}
 }
 
-struct node *tipc_zone_select_remote_node(struct _zone *z_ptr, u32 addr, u32 ref)
+struct tipc_node *tipc_zone_select_remote_node(struct _zone *z_ptr, u32 addr, u32 ref)
 {
 	struct cluster *c_ptr;
-	struct node *n_ptr;
+	struct tipc_node *n_ptr;
 	u32 c_num;
 
 	if (!z_ptr)
diff --git a/net/tipc/zone.h b/net/tipc/zone.h
index 6e7a08df8af5..7bdc3406ba9b 100644
--- a/net/tipc/zone.h
+++ b/net/tipc/zone.h
@@ -54,7 +54,7 @@ struct _zone {
 	u32 links;
 };
 
-struct node *tipc_zone_select_remote_node(struct _zone *z_ptr, u32 addr, u32 ref);
+struct tipc_node *tipc_zone_select_remote_node(struct _zone *z_ptr, u32 addr, u32 ref);
 u32 tipc_zone_select_router(struct _zone *z_ptr, u32 addr, u32 ref);
 void tipc_zone_remove_as_router(struct _zone *z_ptr, u32 router);
 void tipc_zone_send_external_routes(struct _zone *z_ptr, u32 dest);
diff --git a/net/unix/af_unix.c b/net/unix/af_unix.c
index 70ceb1604ad8..015606b54d9b 100644
--- a/net/unix/af_unix.c
+++ b/net/unix/af_unix.c
@@ -227,7 +227,7 @@ static void __unix_remove_socket(struct sock *sk)
 
 static void __unix_insert_socket(struct hlist_head *list, struct sock *sk)
 {
-	BUG_TRAP(sk_unhashed(sk));
+	WARN_ON(!sk_unhashed(sk));
 	sk_add_node(sk, list);
 }
 
@@ -350,9 +350,9 @@ static void unix_sock_destructor(struct sock *sk)
 
 	skb_queue_purge(&sk->sk_receive_queue);
 
-	BUG_TRAP(!atomic_read(&sk->sk_wmem_alloc));
-	BUG_TRAP(sk_unhashed(sk));
-	BUG_TRAP(!sk->sk_socket);
+	WARN_ON(atomic_read(&sk->sk_wmem_alloc));
+	WARN_ON(!sk_unhashed(sk));
+	WARN_ON(sk->sk_socket);
 	if (!sock_flag(sk, SOCK_DEAD)) {
 		printk("Attempt to release alive unix socket: %p\n", sk);
 		return;
@@ -603,7 +603,7 @@ static struct sock * unix_create1(struct net *net, struct socket *sock)
 	u->dentry = NULL;
 	u->mnt	  = NULL;
 	spin_lock_init(&u->lock);
-	atomic_set(&u->inflight, 0);
+	atomic_long_set(&u->inflight, 0);
 	INIT_LIST_HEAD(&u->link);
 	mutex_init(&u->readlock); /* single task reading lock */
 	init_waitqueue_head(&u->peer_wait);
diff --git a/net/unix/garbage.c b/net/unix/garbage.c
index ebdff3d877a1..2a27b84f740b 100644
--- a/net/unix/garbage.c
+++ b/net/unix/garbage.c
@@ -127,7 +127,7 @@ void unix_inflight(struct file *fp)
 	if(s) {
 		struct unix_sock *u = unix_sk(s);
 		spin_lock(&unix_gc_lock);
-		if (atomic_inc_return(&u->inflight) == 1) {
+		if (atomic_long_inc_return(&u->inflight) == 1) {
 			BUG_ON(!list_empty(&u->link));
 			list_add_tail(&u->link, &gc_inflight_list);
 		} else {
@@ -145,7 +145,7 @@ void unix_notinflight(struct file *fp)
 		struct unix_sock *u = unix_sk(s);
 		spin_lock(&unix_gc_lock);
 		BUG_ON(list_empty(&u->link));
-		if (atomic_dec_and_test(&u->inflight))
+		if (atomic_long_dec_and_test(&u->inflight))
 			list_del_init(&u->link);
 		unix_tot_inflight--;
 		spin_unlock(&unix_gc_lock);
@@ -237,17 +237,17 @@ static void scan_children(struct sock *x, void (*func)(struct unix_sock *),
 
 static void dec_inflight(struct unix_sock *usk)
 {
-	atomic_dec(&usk->inflight);
+	atomic_long_dec(&usk->inflight);
 }
 
 static void inc_inflight(struct unix_sock *usk)
 {
-	atomic_inc(&usk->inflight);
+	atomic_long_inc(&usk->inflight);
 }
 
 static void inc_inflight_move_tail(struct unix_sock *u)
 {
-	atomic_inc(&u->inflight);
+	atomic_long_inc(&u->inflight);
 	/*
 	 * If this is still a candidate, move it to the end of the
 	 * list, so that it's checked even if it was already passed
@@ -288,11 +288,11 @@ void unix_gc(void)
 	 * before the detach without atomicity guarantees.
 	 */
 	list_for_each_entry_safe(u, next, &gc_inflight_list, link) {
-		int total_refs;
-		int inflight_refs;
+		long total_refs;
+		long inflight_refs;
 
 		total_refs = file_count(u->sk.sk_socket->file);
-		inflight_refs = atomic_read(&u->inflight);
+		inflight_refs = atomic_long_read(&u->inflight);
 
 		BUG_ON(inflight_refs < 1);
 		BUG_ON(total_refs < inflight_refs);
@@ -324,7 +324,7 @@ void unix_gc(void)
 		/* Move cursor to after the current position. */
 		list_move(&cursor, &u->link);
 
-		if (atomic_read(&u->inflight) > 0) {
+		if (atomic_long_read(&u->inflight) > 0) {
 			list_move_tail(&u->link, &gc_inflight_list);
 			u->gc_candidate = 0;
 			scan_children(&u->sk, inc_inflight_move_tail, NULL);
diff --git a/net/wanrouter/wanmain.c b/net/wanrouter/wanmain.c
index b210a88d0960..7f07152bc109 100644
--- a/net/wanrouter/wanmain.c
+++ b/net/wanrouter/wanmain.c
@@ -57,7 +57,6 @@
 #include <linux/vmalloc.h>	/* vmalloc, vfree */
 #include <asm/uaccess.h>        /* copy_to/from_user */
 #include <linux/init.h>         /* __initfunc et al. */
-#include <net/syncppp.h>
 
 #define KMEM_SAFETYZONE 8
 
@@ -567,9 +566,6 @@ static int wanrouter_device_new_if(struct wan_device *wandev,
 {
 	wanif_conf_t *cnf;
 	struct net_device *dev = NULL;
-#ifdef CONFIG_WANPIPE_MULTPPP
-	struct ppp_device *pppdev=NULL;
-#endif
 	int err;
 
 	if ((wandev->state == WAN_UNCONFIGURED) || (wandev->new_if == NULL))
@@ -588,25 +584,10 @@ static int wanrouter_device_new_if(struct wan_device *wandev,
 		goto out;
 
 	if (cnf->config_id == WANCONFIG_MPPP) {
-#ifdef CONFIG_WANPIPE_MULTPPP
-		pppdev = kzalloc(sizeof(struct ppp_device), GFP_KERNEL);
-		err = -ENOBUFS;
-		if (pppdev == NULL)
-			goto out;
-		pppdev->dev = kzalloc(sizeof(struct net_device), GFP_KERNEL);
-		if (pppdev->dev == NULL) {
-			kfree(pppdev);
-			err = -ENOBUFS;
-			goto out;
-		}
-		err = wandev->new_if(wandev, (struct net_device *)pppdev, cnf);
-		dev = pppdev->dev;
-#else
 		printk(KERN_INFO "%s: Wanpipe Mulit-Port PPP support has not been compiled in!\n",
 				wandev->name);
 		err = -EPROTONOSUPPORT;
 		goto out;
-#endif
 	} else {
 		dev = kzalloc(sizeof(struct net_device), GFP_KERNEL);
 		err = -ENOBUFS;
@@ -661,17 +642,9 @@ static int wanrouter_device_new_if(struct wan_device *wandev,
 	kfree(dev->priv);
 	dev->priv = NULL;
 
-#ifdef CONFIG_WANPIPE_MULTPPP
-	if (cnf->config_id == WANCONFIG_MPPP)
-		kfree(pppdev);
-	else
-		kfree(dev);
-#else
 	/* Sync PPP is disabled */
 	if (cnf->config_id != WANCONFIG_MPPP)
 		kfree(dev);
-#endif
-
 out:
 	kfree(cnf);
 	return err;
diff --git a/net/wireless/Kconfig b/net/wireless/Kconfig
index ab015c62d561..833b024f8f66 100644
--- a/net/wireless/Kconfig
+++ b/net/wireless/Kconfig
@@ -39,4 +39,5 @@ config WIRELESS_EXT_SYSFS
 	  files in /sys/class/net/*/wireless/. The same information
 	  is available via the ioctls as well.
 
-	  Say Y if you have programs using it (we don't know of any).
+	  Say Y if you have programs using it, like old versions of
+	  hal.
diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c
index b7fefffd2d0d..59eb2cf42e5f 100644
--- a/net/wireless/nl80211.c
+++ b/net/wireless/nl80211.c
@@ -29,16 +29,16 @@ static struct genl_family nl80211_fam = {
 };
 
 /* internal helper: get drv and dev */
-static int get_drv_dev_by_info_ifindex(struct genl_info *info,
+static int get_drv_dev_by_info_ifindex(struct nlattr **attrs,
 				       struct cfg80211_registered_device **drv,
 				       struct net_device **dev)
 {
 	int ifindex;
 
-	if (!info->attrs[NL80211_ATTR_IFINDEX])
+	if (!attrs[NL80211_ATTR_IFINDEX])
 		return -EINVAL;
 
-	ifindex = nla_get_u32(info->attrs[NL80211_ATTR_IFINDEX]);
+	ifindex = nla_get_u32(attrs[NL80211_ATTR_IFINDEX]);
 	*dev = dev_get_by_index(&init_net, ifindex);
 	if (!*dev)
 		return -ENODEV;
@@ -291,21 +291,31 @@ static int nl80211_dump_interface(struct sk_buff *skb, struct netlink_callback *
 
 	mutex_lock(&cfg80211_drv_mutex);
 	list_for_each_entry(dev, &cfg80211_drv_list, list) {
-		if (++wp_idx < wp_start)
+		if (wp_idx < wp_start) {
+			wp_idx++;
 			continue;
+		}
 		if_idx = 0;
 
 		mutex_lock(&dev->devlist_mtx);
 		list_for_each_entry(wdev, &dev->netdev_list, list) {
-			if (++if_idx < if_start)
+			if (if_idx < if_start) {
+				if_idx++;
 				continue;
+			}
 			if (nl80211_send_iface(skb, NETLINK_CB(cb->skb).pid,
 					       cb->nlh->nlmsg_seq, NLM_F_MULTI,
-					       wdev->netdev) < 0)
-				break;
+					       wdev->netdev) < 0) {
+				mutex_unlock(&dev->devlist_mtx);
+				goto out;
+			}
+			if_idx++;
 		}
 		mutex_unlock(&dev->devlist_mtx);
+
+		wp_idx++;
 	}
+ out:
 	mutex_unlock(&cfg80211_drv_mutex);
 
 	cb->args[0] = wp_idx;
@@ -321,7 +331,7 @@ static int nl80211_get_interface(struct sk_buff *skb, struct genl_info *info)
 	struct net_device *netdev;
 	int err;
 
-	err = get_drv_dev_by_info_ifindex(info, &dev, &netdev);
+	err = get_drv_dev_by_info_ifindex(info->attrs, &dev, &netdev);
 	if (err)
 		return err;
 
@@ -392,7 +402,7 @@ static int nl80211_set_interface(struct sk_buff *skb, struct genl_info *info)
 	} else
 		return -EINVAL;
 
-	err = get_drv_dev_by_info_ifindex(info, &drv, &dev);
+	err = get_drv_dev_by_info_ifindex(info->attrs, &drv, &dev);
 	if (err)
 		return err;
 	ifindex = dev->ifindex;
@@ -477,7 +487,7 @@ static int nl80211_del_interface(struct sk_buff *skb, struct genl_info *info)
 	int ifindex, err;
 	struct net_device *dev;
 
-	err = get_drv_dev_by_info_ifindex(info, &drv, &dev);
+	err = get_drv_dev_by_info_ifindex(info->attrs, &drv, &dev);
 	if (err)
 		return err;
 	ifindex = dev->ifindex;
@@ -545,7 +555,7 @@ static int nl80211_get_key(struct sk_buff *skb, struct genl_info *info)
 	if (info->attrs[NL80211_ATTR_MAC])
 		mac_addr = nla_data(info->attrs[NL80211_ATTR_MAC]);
 
-	err = get_drv_dev_by_info_ifindex(info, &drv, &dev);
+	err = get_drv_dev_by_info_ifindex(info->attrs, &drv, &dev);
 	if (err)
 		return err;
 
@@ -618,7 +628,7 @@ static int nl80211_set_key(struct sk_buff *skb, struct genl_info *info)
 	if (!info->attrs[NL80211_ATTR_KEY_DEFAULT])
 		return -EINVAL;
 
-	err = get_drv_dev_by_info_ifindex(info, &drv, &dev);
+	err = get_drv_dev_by_info_ifindex(info->attrs, &drv, &dev);
 	if (err)
 		return err;
 
@@ -699,7 +709,7 @@ static int nl80211_new_key(struct sk_buff *skb, struct genl_info *info)
 		return -EINVAL;
 	}
 
-	err = get_drv_dev_by_info_ifindex(info, &drv, &dev);
+	err = get_drv_dev_by_info_ifindex(info->attrs, &drv, &dev);
 	if (err)
 		return err;
 
@@ -735,7 +745,7 @@ static int nl80211_del_key(struct sk_buff *skb, struct genl_info *info)
 	if (info->attrs[NL80211_ATTR_MAC])
 		mac_addr = nla_data(info->attrs[NL80211_ATTR_MAC]);
 
-	err = get_drv_dev_by_info_ifindex(info, &drv, &dev);
+	err = get_drv_dev_by_info_ifindex(info->attrs, &drv, &dev);
 	if (err)
 		return err;
 
@@ -764,7 +774,7 @@ static int nl80211_addset_beacon(struct sk_buff *skb, struct genl_info *info)
 	struct beacon_parameters params;
 	int haveinfo = 0;
 
-	err = get_drv_dev_by_info_ifindex(info, &drv, &dev);
+	err = get_drv_dev_by_info_ifindex(info->attrs, &drv, &dev);
 	if (err)
 		return err;
 
@@ -843,7 +853,7 @@ static int nl80211_del_beacon(struct sk_buff *skb, struct genl_info *info)
 	int err;
 	struct net_device *dev;
 
-	err = get_drv_dev_by_info_ifindex(info, &drv, &dev);
+	err = get_drv_dev_by_info_ifindex(info->attrs, &drv, &dev);
 	if (err)
 		return err;
 
@@ -937,67 +947,78 @@ static int nl80211_send_station(struct sk_buff *msg, u32 pid, u32 seq,
 }
 
 static int nl80211_dump_station(struct sk_buff *skb,
-		struct netlink_callback *cb)
+				struct netlink_callback *cb)
 {
-	int wp_idx = 0;
-	int if_idx = 0;
-	int sta_idx = cb->args[2];
-	int wp_start = cb->args[0];
-	int if_start = cb->args[1];
 	struct station_info sinfo;
 	struct cfg80211_registered_device *dev;
-	struct wireless_dev *wdev;
+	struct net_device *netdev;
 	u8 mac_addr[ETH_ALEN];
+	int ifidx = cb->args[0];
+	int sta_idx = cb->args[1];
 	int err;
-	int exit = 0;
 
-	/* TODO: filter by device */
-	mutex_lock(&cfg80211_drv_mutex);
-	list_for_each_entry(dev, &cfg80211_drv_list, list) {
-		if (exit)
+	if (!ifidx) {
+		err = nlmsg_parse(cb->nlh, GENL_HDRLEN + nl80211_fam.hdrsize,
+				  nl80211_fam.attrbuf, nl80211_fam.maxattr,
+				  nl80211_policy);
+		if (err)
+			return err;
+
+		if (!nl80211_fam.attrbuf[NL80211_ATTR_IFINDEX])
+			return -EINVAL;
+
+		ifidx = nla_get_u32(nl80211_fam.attrbuf[NL80211_ATTR_IFINDEX]);
+		if (!ifidx)
+			return -EINVAL;
+	}
+
+	netdev = dev_get_by_index(&init_net, ifidx);
+	if (!netdev)
+		return -ENODEV;
+
+	dev = cfg80211_get_dev_from_ifindex(ifidx);
+	if (IS_ERR(dev)) {
+		err = PTR_ERR(dev);
+		goto out_put_netdev;
+	}
+
+	if (!dev->ops->dump_station) {
+		err = -ENOSYS;
+		goto out_err;
+	}
+
+	rtnl_lock();
+
+	while (1) {
+		err = dev->ops->dump_station(&dev->wiphy, netdev, sta_idx,
+					     mac_addr, &sinfo);
+		if (err == -ENOENT)
 			break;
-		if (++wp_idx < wp_start)
-			continue;
-		if_idx = 0;
+		if (err)
+			goto out_err_rtnl;
 
-		mutex_lock(&dev->devlist_mtx);
-		list_for_each_entry(wdev, &dev->netdev_list, list) {
-			if (exit)
-				break;
-			if (++if_idx < if_start)
-				continue;
-			if (!dev->ops->dump_station)
-				continue;
+		if (nl80211_send_station(skb,
+				NETLINK_CB(cb->skb).pid,
+				cb->nlh->nlmsg_seq, NLM_F_MULTI,
+				netdev, mac_addr,
+				&sinfo) < 0)
+			goto out;
 
-			for (;; ++sta_idx) {
-				rtnl_lock();
-				err = dev->ops->dump_station(&dev->wiphy,
-						wdev->netdev, sta_idx, mac_addr,
-						&sinfo);
-				rtnl_unlock();
-				if (err) {
-					sta_idx = 0;
-					break;
-				}
-				if (nl80211_send_station(skb,
-						NETLINK_CB(cb->skb).pid,
-						cb->nlh->nlmsg_seq, NLM_F_MULTI,
-						wdev->netdev, mac_addr,
-						&sinfo) < 0) {
-					exit = 1;
-					break;
-				}
-			}
-		}
-		mutex_unlock(&dev->devlist_mtx);
+		sta_idx++;
 	}
-	mutex_unlock(&cfg80211_drv_mutex);
 
-	cb->args[0] = wp_idx;
-	cb->args[1] = if_idx;
-	cb->args[2] = sta_idx;
 
-	return skb->len;
+ out:
+	cb->args[1] = sta_idx;
+	err = skb->len;
+ out_err_rtnl:
+	rtnl_unlock();
+ out_err:
+	cfg80211_put_dev(dev);
+ out_put_netdev:
+	dev_put(netdev);
+
+	return err;
 }
 
 static int nl80211_get_station(struct sk_buff *skb, struct genl_info *info)
@@ -1016,7 +1037,7 @@ static int nl80211_get_station(struct sk_buff *skb, struct genl_info *info)
 
 	mac_addr = nla_data(info->attrs[NL80211_ATTR_MAC]);
 
-	err = get_drv_dev_by_info_ifindex(info, &drv, &dev);
+	err = get_drv_dev_by_info_ifindex(info->attrs, &drv, &dev);
 	if (err)
 		return err;
 
@@ -1112,7 +1133,7 @@ static int nl80211_set_station(struct sk_buff *skb, struct genl_info *info)
 		params.plink_action =
 		    nla_get_u8(info->attrs[NL80211_ATTR_STA_PLINK_ACTION]);
 
-	err = get_drv_dev_by_info_ifindex(info, &drv, &dev);
+	err = get_drv_dev_by_info_ifindex(info->attrs, &drv, &dev);
 	if (err)
 		return err;
 
@@ -1172,7 +1193,7 @@ static int nl80211_new_station(struct sk_buff *skb, struct genl_info *info)
 				&params.station_flags))
 		return -EINVAL;
 
-	err = get_drv_dev_by_info_ifindex(info, &drv, &dev);
+	err = get_drv_dev_by_info_ifindex(info->attrs, &drv, &dev);
 	if (err)
 		return err;
 
@@ -1207,7 +1228,7 @@ static int nl80211_del_station(struct sk_buff *skb, struct genl_info *info)
 	if (info->attrs[NL80211_ATTR_MAC])
 		mac_addr = nla_data(info->attrs[NL80211_ATTR_MAC]);
 
-	err = get_drv_dev_by_info_ifindex(info, &drv, &dev);
+	err = get_drv_dev_by_info_ifindex(info->attrs, &drv, &dev);
 	if (err)
 		return err;
 
@@ -1277,68 +1298,78 @@ static int nl80211_send_mpath(struct sk_buff *msg, u32 pid, u32 seq,
 }
 
 static int nl80211_dump_mpath(struct sk_buff *skb,
-		struct netlink_callback *cb)
+			      struct netlink_callback *cb)
 {
-	int wp_idx = 0;
-	int if_idx = 0;
-	int sta_idx = cb->args[2];
-	int wp_start = cb->args[0];
-	int if_start = cb->args[1];
 	struct mpath_info pinfo;
 	struct cfg80211_registered_device *dev;
-	struct wireless_dev *wdev;
+	struct net_device *netdev;
 	u8 dst[ETH_ALEN];
 	u8 next_hop[ETH_ALEN];
+	int ifidx = cb->args[0];
+	int path_idx = cb->args[1];
 	int err;
-	int exit = 0;
 
-	/* TODO: filter by device */
-	mutex_lock(&cfg80211_drv_mutex);
-	list_for_each_entry(dev, &cfg80211_drv_list, list) {
-		if (exit)
+	if (!ifidx) {
+		err = nlmsg_parse(cb->nlh, GENL_HDRLEN + nl80211_fam.hdrsize,
+				  nl80211_fam.attrbuf, nl80211_fam.maxattr,
+				  nl80211_policy);
+		if (err)
+			return err;
+
+		if (!nl80211_fam.attrbuf[NL80211_ATTR_IFINDEX])
+			return -EINVAL;
+
+		ifidx = nla_get_u32(nl80211_fam.attrbuf[NL80211_ATTR_IFINDEX]);
+		if (!ifidx)
+			return -EINVAL;
+	}
+
+	netdev = dev_get_by_index(&init_net, ifidx);
+	if (!netdev)
+		return -ENODEV;
+
+	dev = cfg80211_get_dev_from_ifindex(ifidx);
+	if (IS_ERR(dev)) {
+		err = PTR_ERR(dev);
+		goto out_put_netdev;
+	}
+
+	if (!dev->ops->dump_mpath) {
+		err = -ENOSYS;
+		goto out_err;
+	}
+
+	rtnl_lock();
+
+	while (1) {
+		err = dev->ops->dump_mpath(&dev->wiphy, netdev, path_idx,
+					   dst, next_hop, &pinfo);
+		if (err == -ENOENT)
 			break;
-		if (++wp_idx < wp_start)
-			continue;
-		if_idx = 0;
+		if (err)
+			goto out_err_rtnl;
 
-		mutex_lock(&dev->devlist_mtx);
-		list_for_each_entry(wdev, &dev->netdev_list, list) {
-			if (exit)
-				break;
-			if (++if_idx < if_start)
-				continue;
-			if (!dev->ops->dump_mpath)
-				continue;
+		if (nl80211_send_mpath(skb, NETLINK_CB(cb->skb).pid,
+				       cb->nlh->nlmsg_seq, NLM_F_MULTI,
+				       netdev, dst, next_hop,
+				       &pinfo) < 0)
+			goto out;
 
-			for (;; ++sta_idx) {
-				rtnl_lock();
-				err = dev->ops->dump_mpath(&dev->wiphy,
-						wdev->netdev, sta_idx, dst,
-						next_hop, &pinfo);
-				rtnl_unlock();
-				if (err) {
-					sta_idx = 0;
-					break;
-				}
-				if (nl80211_send_mpath(skb,
-						NETLINK_CB(cb->skb).pid,
-						cb->nlh->nlmsg_seq, NLM_F_MULTI,
-						wdev->netdev, dst, next_hop,
-						&pinfo) < 0) {
-					exit = 1;
-					break;
-				}
-			}
-		}
-		mutex_unlock(&dev->devlist_mtx);
+		path_idx++;
 	}
-	mutex_unlock(&cfg80211_drv_mutex);
 
-	cb->args[0] = wp_idx;
-	cb->args[1] = if_idx;
-	cb->args[2] = sta_idx;
 
-	return skb->len;
+ out:
+	cb->args[1] = path_idx;
+	err = skb->len;
+ out_err_rtnl:
+	rtnl_unlock();
+ out_err:
+	cfg80211_put_dev(dev);
+ out_put_netdev:
+	dev_put(netdev);
+
+	return err;
 }
 
 static int nl80211_get_mpath(struct sk_buff *skb, struct genl_info *info)
@@ -1358,7 +1389,7 @@ static int nl80211_get_mpath(struct sk_buff *skb, struct genl_info *info)
 
 	dst = nla_data(info->attrs[NL80211_ATTR_MAC]);
 
-	err = get_drv_dev_by_info_ifindex(info, &drv, &dev);
+	err = get_drv_dev_by_info_ifindex(info->attrs, &drv, &dev);
 	if (err)
 		return err;
 
@@ -1411,7 +1442,7 @@ static int nl80211_set_mpath(struct sk_buff *skb, struct genl_info *info)
 	dst = nla_data(info->attrs[NL80211_ATTR_MAC]);
 	next_hop = nla_data(info->attrs[NL80211_ATTR_MPATH_NEXT_HOP]);
 
-	err = get_drv_dev_by_info_ifindex(info, &drv, &dev);
+	err = get_drv_dev_by_info_ifindex(info->attrs, &drv, &dev);
 	if (err)
 		return err;
 
@@ -1446,7 +1477,7 @@ static int nl80211_new_mpath(struct sk_buff *skb, struct genl_info *info)
 	dst = nla_data(info->attrs[NL80211_ATTR_MAC]);
 	next_hop = nla_data(info->attrs[NL80211_ATTR_MPATH_NEXT_HOP]);
 
-	err = get_drv_dev_by_info_ifindex(info, &drv, &dev);
+	err = get_drv_dev_by_info_ifindex(info->attrs, &drv, &dev);
 	if (err)
 		return err;
 
@@ -1475,7 +1506,7 @@ static int nl80211_del_mpath(struct sk_buff *skb, struct genl_info *info)
 	if (info->attrs[NL80211_ATTR_MAC])
 		dst = nla_data(info->attrs[NL80211_ATTR_MAC]);
 
-	err = get_drv_dev_by_info_ifindex(info, &drv, &dev);
+	err = get_drv_dev_by_info_ifindex(info->attrs, &drv, &dev);
 	if (err)
 		return err;
 
diff --git a/net/wireless/wext.c b/net/wireless/wext.c
index df5b3886c36b..d98ffb75119a 100644
--- a/net/wireless/wext.c
+++ b/net/wireless/wext.c
@@ -1277,6 +1277,7 @@ static int rtnetlink_fill_iwinfo(struct sk_buff *skb, struct net_device *dev,
 	r->ifi_flags = dev_get_flags(dev);
 	r->ifi_change = 0;	/* Wireless changes don't affect those flags */
 
+	NLA_PUT_STRING(skb, IFLA_IFNAME, dev->name);
 	/* Add the wireless events in the netlink packet */
 	NLA_PUT(skb, IFLA_WIRELESS, event_len, event);
 
diff --git a/net/xfrm/Kconfig b/net/xfrm/Kconfig
index 9201ef8ad90e..6d081674515f 100644
--- a/net/xfrm/Kconfig
+++ b/net/xfrm/Kconfig
@@ -46,6 +46,12 @@ config XFRM_STATISTICS
 
 	  If unsure, say N.
 
+config XFRM_IPCOMP
+	tristate
+	select XFRM
+	select CRYPTO
+	select CRYPTO_DEFLATE
+
 config NET_KEY
 	tristate "PF_KEY sockets"
 	select XFRM
diff --git a/net/xfrm/Makefile b/net/xfrm/Makefile
index 332cfb0ff566..0f439a72ccab 100644
--- a/net/xfrm/Makefile
+++ b/net/xfrm/Makefile
@@ -6,4 +6,5 @@ obj-$(CONFIG_XFRM) := xfrm_policy.o xfrm_state.o xfrm_hash.o \
 		      xfrm_input.o xfrm_output.o xfrm_algo.o
 obj-$(CONFIG_XFRM_STATISTICS) += xfrm_proc.o
 obj-$(CONFIG_XFRM_USER) += xfrm_user.o
+obj-$(CONFIG_XFRM_IPCOMP) += xfrm_ipcomp.o
 
diff --git a/net/xfrm/xfrm_algo.c b/net/xfrm/xfrm_algo.c
index 23a2cc04b8cd..96036cf2216d 100644
--- a/net/xfrm/xfrm_algo.c
+++ b/net/xfrm/xfrm_algo.c
@@ -718,7 +718,7 @@ int skb_icv_walk(const struct sk_buff *skb, struct hash_desc *desc,
 	for (i = 0; i < skb_shinfo(skb)->nr_frags; i++) {
 		int end;
 
-		BUG_TRAP(start <= offset + len);
+		WARN_ON(start > offset + len);
 
 		end = start + skb_shinfo(skb)->frags[i].size;
 		if ((copy = end - offset) > 0) {
@@ -748,7 +748,7 @@ int skb_icv_walk(const struct sk_buff *skb, struct hash_desc *desc,
 		for (; list; list = list->next) {
 			int end;
 
-			BUG_TRAP(start <= offset + len);
+			WARN_ON(start > offset + len);
 
 			end = start + list->len;
 			if ((copy = end - offset) > 0) {
diff --git a/net/xfrm/xfrm_ipcomp.c b/net/xfrm/xfrm_ipcomp.c
new file mode 100644
index 000000000000..c609a4b98e15
--- /dev/null
+++ b/net/xfrm/xfrm_ipcomp.c
@@ -0,0 +1,384 @@
+/*
+ * IP Payload Compression Protocol (IPComp) - RFC3173.
+ *
+ * Copyright (c) 2003 James Morris <jmorris@intercode.com.au>
+ * Copyright (c) 2003-2008 Herbert Xu <herbert@gondor.apana.org.au>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the Free
+ * Software Foundation; either version 2 of the License, or (at your option)
+ * any later version.
+ *
+ * Todo:
+ *   - Tunable compression parameters.
+ *   - Compression stats.
+ *   - Adaptive compression.
+ */
+
+#include <linux/crypto.h>
+#include <linux/err.h>
+#include <linux/gfp.h>
+#include <linux/list.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/percpu.h>
+#include <linux/smp.h>
+#include <linux/vmalloc.h>
+#include <net/ip.h>
+#include <net/ipcomp.h>
+#include <net/xfrm.h>
+
+struct ipcomp_tfms {
+	struct list_head list;
+	struct crypto_comp **tfms;
+	int users;
+};
+
+static DEFINE_MUTEX(ipcomp_resource_mutex);
+static void **ipcomp_scratches;
+static int ipcomp_scratch_users;
+static LIST_HEAD(ipcomp_tfms_list);
+
+static int ipcomp_decompress(struct xfrm_state *x, struct sk_buff *skb)
+{
+	struct ipcomp_data *ipcd = x->data;
+	const int plen = skb->len;
+	int dlen = IPCOMP_SCRATCH_SIZE;
+	const u8 *start = skb->data;
+	const int cpu = get_cpu();
+	u8 *scratch = *per_cpu_ptr(ipcomp_scratches, cpu);
+	struct crypto_comp *tfm = *per_cpu_ptr(ipcd->tfms, cpu);
+	int err = crypto_comp_decompress(tfm, start, plen, scratch, &dlen);
+	int len;
+
+	if (err)
+		goto out;
+
+	if (dlen < (plen + sizeof(struct ip_comp_hdr))) {
+		err = -EINVAL;
+		goto out;
+	}
+
+	len = dlen - plen;
+	if (len > skb_tailroom(skb))
+		len = skb_tailroom(skb);
+
+	skb->truesize += len;
+	__skb_put(skb, len);
+
+	len += plen;
+	skb_copy_to_linear_data(skb, scratch, len);
+
+	while ((scratch += len, dlen -= len) > 0) {
+		skb_frag_t *frag;
+
+		err = -EMSGSIZE;
+		if (WARN_ON(skb_shinfo(skb)->nr_frags >= MAX_SKB_FRAGS))
+			goto out;
+
+		frag = skb_shinfo(skb)->frags + skb_shinfo(skb)->nr_frags;
+		frag->page = alloc_page(GFP_ATOMIC);
+
+		err = -ENOMEM;
+		if (!frag->page)
+			goto out;
+
+		len = PAGE_SIZE;
+		if (dlen < len)
+			len = dlen;
+
+		memcpy(page_address(frag->page), scratch, len);
+
+		frag->page_offset = 0;
+		frag->size = len;
+		skb->truesize += len;
+		skb->data_len += len;
+		skb->len += len;
+
+		skb_shinfo(skb)->nr_frags++;
+	}
+
+	err = 0;
+
+out:
+	put_cpu();
+	return err;
+}
+
+int ipcomp_input(struct xfrm_state *x, struct sk_buff *skb)
+{
+	int nexthdr;
+	int err = -ENOMEM;
+	struct ip_comp_hdr *ipch;
+
+	if (skb_linearize_cow(skb))
+		goto out;
+
+	skb->ip_summed = CHECKSUM_NONE;
+
+	/* Remove ipcomp header and decompress original payload */
+	ipch = (void *)skb->data;
+	nexthdr = ipch->nexthdr;
+
+	skb->transport_header = skb->network_header + sizeof(*ipch);
+	__skb_pull(skb, sizeof(*ipch));
+	err = ipcomp_decompress(x, skb);
+	if (err)
+		goto out;
+
+	err = nexthdr;
+
+out:
+	return err;
+}
+EXPORT_SYMBOL_GPL(ipcomp_input);
+
+static int ipcomp_compress(struct xfrm_state *x, struct sk_buff *skb)
+{
+	struct ipcomp_data *ipcd = x->data;
+	const int plen = skb->len;
+	int dlen = IPCOMP_SCRATCH_SIZE;
+	u8 *start = skb->data;
+	const int cpu = get_cpu();
+	u8 *scratch = *per_cpu_ptr(ipcomp_scratches, cpu);
+	struct crypto_comp *tfm = *per_cpu_ptr(ipcd->tfms, cpu);
+	int err;
+
+	local_bh_disable();
+	err = crypto_comp_compress(tfm, start, plen, scratch, &dlen);
+	local_bh_enable();
+	if (err)
+		goto out;
+
+	if ((dlen + sizeof(struct ip_comp_hdr)) >= plen) {
+		err = -EMSGSIZE;
+		goto out;
+	}
+
+	memcpy(start + sizeof(struct ip_comp_hdr), scratch, dlen);
+	put_cpu();
+
+	pskb_trim(skb, dlen + sizeof(struct ip_comp_hdr));
+	return 0;
+
+out:
+	put_cpu();
+	return err;
+}
+
+int ipcomp_output(struct xfrm_state *x, struct sk_buff *skb)
+{
+	int err;
+	struct ip_comp_hdr *ipch;
+	struct ipcomp_data *ipcd = x->data;
+
+	if (skb->len < ipcd->threshold) {
+		/* Don't bother compressing */
+		goto out_ok;
+	}
+
+	if (skb_linearize_cow(skb))
+		goto out_ok;
+
+	err = ipcomp_compress(x, skb);
+
+	if (err) {
+		goto out_ok;
+	}
+
+	/* Install ipcomp header, convert into ipcomp datagram. */
+	ipch = ip_comp_hdr(skb);
+	ipch->nexthdr = *skb_mac_header(skb);
+	ipch->flags = 0;
+	ipch->cpi = htons((u16 )ntohl(x->id.spi));
+	*skb_mac_header(skb) = IPPROTO_COMP;
+out_ok:
+	skb_push(skb, -skb_network_offset(skb));
+	return 0;
+}
+EXPORT_SYMBOL_GPL(ipcomp_output);
+
+static void ipcomp_free_scratches(void)
+{
+	int i;
+	void **scratches;
+
+	if (--ipcomp_scratch_users)
+		return;
+
+	scratches = ipcomp_scratches;
+	if (!scratches)
+		return;
+
+	for_each_possible_cpu(i)
+		vfree(*per_cpu_ptr(scratches, i));
+
+	free_percpu(scratches);
+}
+
+static void **ipcomp_alloc_scratches(void)
+{
+	int i;
+	void **scratches;
+
+	if (ipcomp_scratch_users++)
+		return ipcomp_scratches;
+
+	scratches = alloc_percpu(void *);
+	if (!scratches)
+		return NULL;
+
+	ipcomp_scratches = scratches;
+
+	for_each_possible_cpu(i) {
+		void *scratch = vmalloc(IPCOMP_SCRATCH_SIZE);
+		if (!scratch)
+			return NULL;
+		*per_cpu_ptr(scratches, i) = scratch;
+	}
+
+	return scratches;
+}
+
+static void ipcomp_free_tfms(struct crypto_comp **tfms)
+{
+	struct ipcomp_tfms *pos;
+	int cpu;
+
+	list_for_each_entry(pos, &ipcomp_tfms_list, list) {
+		if (pos->tfms == tfms)
+			break;
+	}
+
+	WARN_ON(!pos);
+
+	if (--pos->users)
+		return;
+
+	list_del(&pos->list);
+	kfree(pos);
+
+	if (!tfms)
+		return;
+
+	for_each_possible_cpu(cpu) {
+		struct crypto_comp *tfm = *per_cpu_ptr(tfms, cpu);
+		crypto_free_comp(tfm);
+	}
+	free_percpu(tfms);
+}
+
+static struct crypto_comp **ipcomp_alloc_tfms(const char *alg_name)
+{
+	struct ipcomp_tfms *pos;
+	struct crypto_comp **tfms;
+	int cpu;
+
+	/* This can be any valid CPU ID so we don't need locking. */
+	cpu = raw_smp_processor_id();
+
+	list_for_each_entry(pos, &ipcomp_tfms_list, list) {
+		struct crypto_comp *tfm;
+
+		tfms = pos->tfms;
+		tfm = *per_cpu_ptr(tfms, cpu);
+
+		if (!strcmp(crypto_comp_name(tfm), alg_name)) {
+			pos->users++;
+			return tfms;
+		}
+	}
+
+	pos = kmalloc(sizeof(*pos), GFP_KERNEL);
+	if (!pos)
+		return NULL;
+
+	pos->users = 1;
+	INIT_LIST_HEAD(&pos->list);
+	list_add(&pos->list, &ipcomp_tfms_list);
+
+	pos->tfms = tfms = alloc_percpu(struct crypto_comp *);
+	if (!tfms)
+		goto error;
+
+	for_each_possible_cpu(cpu) {
+		struct crypto_comp *tfm = crypto_alloc_comp(alg_name, 0,
+							    CRYPTO_ALG_ASYNC);
+		if (IS_ERR(tfm))
+			goto error;
+		*per_cpu_ptr(tfms, cpu) = tfm;
+	}
+
+	return tfms;
+
+error:
+	ipcomp_free_tfms(tfms);
+	return NULL;
+}
+
+static void ipcomp_free_data(struct ipcomp_data *ipcd)
+{
+	if (ipcd->tfms)
+		ipcomp_free_tfms(ipcd->tfms);
+	ipcomp_free_scratches();
+}
+
+void ipcomp_destroy(struct xfrm_state *x)
+{
+	struct ipcomp_data *ipcd = x->data;
+	if (!ipcd)
+		return;
+	xfrm_state_delete_tunnel(x);
+	mutex_lock(&ipcomp_resource_mutex);
+	ipcomp_free_data(ipcd);
+	mutex_unlock(&ipcomp_resource_mutex);
+	kfree(ipcd);
+}
+EXPORT_SYMBOL_GPL(ipcomp_destroy);
+
+int ipcomp_init_state(struct xfrm_state *x)
+{
+	int err;
+	struct ipcomp_data *ipcd;
+	struct xfrm_algo_desc *calg_desc;
+
+	err = -EINVAL;
+	if (!x->calg)
+		goto out;
+
+	if (x->encap)
+		goto out;
+
+	err = -ENOMEM;
+	ipcd = kzalloc(sizeof(*ipcd), GFP_KERNEL);
+	if (!ipcd)
+		goto out;
+
+	mutex_lock(&ipcomp_resource_mutex);
+	if (!ipcomp_alloc_scratches())
+		goto error;
+
+	ipcd->tfms = ipcomp_alloc_tfms(x->calg->alg_name);
+	if (!ipcd->tfms)
+		goto error;
+	mutex_unlock(&ipcomp_resource_mutex);
+
+	calg_desc = xfrm_calg_get_byname(x->calg->alg_name, 0);
+	BUG_ON(!calg_desc);
+	ipcd->threshold = calg_desc->uinfo.comp.threshold;
+	x->data = ipcd;
+	err = 0;
+out:
+	return err;
+
+error:
+	ipcomp_free_data(ipcd);
+	mutex_unlock(&ipcomp_resource_mutex);
+	kfree(ipcd);
+	goto out;
+}
+EXPORT_SYMBOL_GPL(ipcomp_init_state);
+
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("IP Payload Compression Protocol (IPComp) - RFC3173");
+MODULE_AUTHOR("James Morris <jmorris@intercode.com.au>");
diff --git a/net/xfrm/xfrm_output.c b/net/xfrm/xfrm_output.c
index 3f964db908a7..ac25b4c0e982 100644
--- a/net/xfrm/xfrm_output.c
+++ b/net/xfrm/xfrm_output.c
@@ -112,16 +112,13 @@ error_nolock:
 int xfrm_output_resume(struct sk_buff *skb, int err)
 {
 	while (likely((err = xfrm_output_one(skb, err)) == 0)) {
-		struct xfrm_state *x;
-
 		nf_reset(skb);
 
 		err = skb->dst->ops->local_out(skb);
 		if (unlikely(err != 1))
 			goto out;
 
-		x = skb->dst->xfrm;
-		if (!x)
+		if (!skb->dst->xfrm)
 			return dst_output(skb);
 
 		err = nf_hook(skb->dst->ops->family,
diff --git a/net/xfrm/xfrm_policy.c b/net/xfrm/xfrm_policy.c
index 841b32a2e680..46914b79d850 100644
--- a/net/xfrm/xfrm_policy.c
+++ b/net/xfrm/xfrm_policy.c
@@ -1731,8 +1731,7 @@ restart:
 			 * We can't enlist stable bundles either.
 			 */
 			write_unlock_bh(&policy->lock);
-			if (dst)
-				dst_free(dst);
+			dst_free(dst);
 
 			if (pol_dead)
 				XFRM_INC_STATS(LINUX_MIB_XFRMOUTPOLDEAD);
@@ -1748,8 +1747,7 @@ restart:
 			err = xfrm_dst_update_origin(dst, fl);
 		if (unlikely(err)) {
 			write_unlock_bh(&policy->lock);
-			if (dst)
-				dst_free(dst);
+			dst_free(dst);
 			XFRM_INC_STATS(LINUX_MIB_XFRMOUTBUNDLECHECKERROR);
 			goto error;
 		}
diff --git a/net/xfrm/xfrm_state.c b/net/xfrm/xfrm_state.c
index 72fddafd891a..7bd62f61593f 100644
--- a/net/xfrm/xfrm_state.c
+++ b/net/xfrm/xfrm_state.c
@@ -538,7 +538,7 @@ EXPORT_SYMBOL(xfrm_state_alloc);
 
 void __xfrm_state_destroy(struct xfrm_state *x)
 {
-	BUG_TRAP(x->km.state == XFRM_STATE_DEAD);
+	WARN_ON(x->km.state != XFRM_STATE_DEAD);
 
 	spin_lock_bh(&xfrm_state_lock);
 	list_del(&x->all);
@@ -780,11 +780,13 @@ xfrm_state_find(xfrm_address_t *daddr, xfrm_address_t *saddr,
 {
 	unsigned int h;
 	struct hlist_node *entry;
-	struct xfrm_state *x, *x0;
+	struct xfrm_state *x, *x0, *to_put;
 	int acquire_in_progress = 0;
 	int error = 0;
 	struct xfrm_state *best = NULL;
 
+	to_put = NULL;
+
 	spin_lock_bh(&xfrm_state_lock);
 	h = xfrm_dst_hash(daddr, saddr, tmpl->reqid, family);
 	hlist_for_each_entry(x, entry, xfrm_state_bydst+h, bydst) {
@@ -833,7 +835,7 @@ xfrm_state_find(xfrm_address_t *daddr, xfrm_address_t *saddr,
 		if (tmpl->id.spi &&
 		    (x0 = __xfrm_state_lookup(daddr, tmpl->id.spi,
 					      tmpl->id.proto, family)) != NULL) {
-			xfrm_state_put(x0);
+			to_put = x0;
 			error = -EEXIST;
 			goto out;
 		}
@@ -849,7 +851,7 @@ xfrm_state_find(xfrm_address_t *daddr, xfrm_address_t *saddr,
 		error = security_xfrm_state_alloc_acquire(x, pol->security, fl->secid);
 		if (error) {
 			x->km.state = XFRM_STATE_DEAD;
-			xfrm_state_put(x);
+			to_put = x;
 			x = NULL;
 			goto out;
 		}
@@ -870,7 +872,7 @@ xfrm_state_find(xfrm_address_t *daddr, xfrm_address_t *saddr,
 			xfrm_hash_grow_check(x->bydst.next != NULL);
 		} else {
 			x->km.state = XFRM_STATE_DEAD;
-			xfrm_state_put(x);
+			to_put = x;
 			x = NULL;
 			error = -ESRCH;
 		}
@@ -881,6 +883,8 @@ out:
 	else
 		*err = acquire_in_progress ? -EAGAIN : error;
 	spin_unlock_bh(&xfrm_state_lock);
+	if (to_put)
+		xfrm_state_put(to_put);
 	return x;
 }
 
@@ -1067,18 +1071,20 @@ static struct xfrm_state *__xfrm_find_acq_byseq(u32 seq);
 
 int xfrm_state_add(struct xfrm_state *x)
 {
-	struct xfrm_state *x1;
+	struct xfrm_state *x1, *to_put;
 	int family;
 	int err;
 	int use_spi = xfrm_id_proto_match(x->id.proto, IPSEC_PROTO_ANY);
 
 	family = x->props.family;
 
+	to_put = NULL;
+
 	spin_lock_bh(&xfrm_state_lock);
 
 	x1 = __xfrm_state_locate(x, use_spi, family);
 	if (x1) {
-		xfrm_state_put(x1);
+		to_put = x1;
 		x1 = NULL;
 		err = -EEXIST;
 		goto out;
@@ -1088,7 +1094,7 @@ int xfrm_state_add(struct xfrm_state *x)
 		x1 = __xfrm_find_acq_byseq(x->km.seq);
 		if (x1 && ((x1->id.proto != x->id.proto) ||
 		    xfrm_addr_cmp(&x1->id.daddr, &x->id.daddr, family))) {
-			xfrm_state_put(x1);
+			to_put = x1;
 			x1 = NULL;
 		}
 	}
@@ -1110,6 +1116,9 @@ out:
 		xfrm_state_put(x1);
 	}
 
+	if (to_put)
+		xfrm_state_put(to_put);
+
 	return err;
 }
 EXPORT_SYMBOL(xfrm_state_add);
@@ -1269,10 +1278,12 @@ EXPORT_SYMBOL(xfrm_state_migrate);
 
 int xfrm_state_update(struct xfrm_state *x)
 {
-	struct xfrm_state *x1;
+	struct xfrm_state *x1, *to_put;
 	int err;
 	int use_spi = xfrm_id_proto_match(x->id.proto, IPSEC_PROTO_ANY);
 
+	to_put = NULL;
+
 	spin_lock_bh(&xfrm_state_lock);
 	x1 = __xfrm_state_locate(x, use_spi, x->props.family);
 
@@ -1281,7 +1292,7 @@ int xfrm_state_update(struct xfrm_state *x)
 		goto out;
 
 	if (xfrm_state_kern(x1)) {
-		xfrm_state_put(x1);
+		to_put = x1;
 		err = -EEXIST;
 		goto out;
 	}
@@ -1295,6 +1306,9 @@ int xfrm_state_update(struct xfrm_state *x)
 out:
 	spin_unlock_bh(&xfrm_state_lock);
 
+	if (to_put)
+		xfrm_state_put(to_put);
+
 	if (err)
 		return err;
 
diff --git a/scripts/Makefile.fwinst b/scripts/Makefile.fwinst
index c972c0f54ce0..6bf8e87f1dcf 100644
--- a/scripts/Makefile.fwinst
+++ b/scripts/Makefile.fwinst
@@ -17,14 +17,15 @@ include $(srctree)/$(obj)/Makefile
 
 include scripts/Makefile.host
 
-mod-fw := $(addprefix $(INSTALL_FW_PATH)/,$(fw-shipped-m))
-
+mod-fw := $(fw-shipped-m)
 # If CONFIG_FIRMWARE_IN_KERNEL isn't set, then install the 
 # firmware for in-kernel drivers too.
 ifndef CONFIG_FIRMWARE_IN_KERNEL
-mod-fw += $(addprefix $(INSTALL_FW_PATH)/,$(fw-shipped-y))
+mod-fw += $(fw-shipped-y)
 endif
 
+installed-mod-fw := $(addprefix $(INSTALL_FW_PATH)/,$(mod-fw))
+
 installed-fw := $(addprefix $(INSTALL_FW_PATH)/,$(fw-shipped-all))
 installed-fw-dirs := $(sort $(dir $(installed-fw))) $(INSTALL_FW_PATH)/.
 
@@ -49,7 +50,12 @@ PHONY +=  __fw_install __fw_modinst FORCE
 .PHONY: $(PHONY)
 
 __fw_install: $(installed-fw)
-__fw_modinst: $(mod-fw)
+
+__fw_modinst: $(installed-mod-fw)
+	@:
+
+__fw_modbuild: $(addprefix $(obj)/,$(mod-fw))
+	@:
 
 FORCE:
 
diff --git a/scripts/Makefile.headersinst b/scripts/Makefile.headersinst
index 53dae3eb3d1f..612dc13ddd85 100644
--- a/scripts/Makefile.headersinst
+++ b/scripts/Makefile.headersinst
@@ -1,194 +1,98 @@
 # ==========================================================================
 # Installing headers
 #
-# header-y files will be installed verbatim
-# unifdef-y are the files where unifdef will be run before installing files
-# objhdr-y are generated files that will be installed verbatim
+# header-y  - list files to be installed. They are preprocessed
+#             to remove __KERNEL__ section of the file
+# unifdef-y - Same as header-y. Obsolete
+# objhdr-y  - Same as header-y but for generated files
 #
 # ==========================================================================
 
-UNIFDEF := scripts/unifdef -U__KERNEL__
-
-# Eliminate the contents of (and inclusions of) compiler.h
-HDRSED  := sed 	-e "s/ inline / __inline__ /g" \
-		-e "s/[[:space:]]__user[[:space:]]\{1,\}/ /g" \
-		-e "s/(__user[[:space:]]\{1,\}/ (/g" \
-		-e "s/[[:space:]]__force[[:space:]]\{1,\}/ /g" \
-		-e "s/(__force[[:space:]]\{1,\}/ (/g" \
-		-e "s/[[:space:]]__iomem[[:space:]]\{1,\}/ /g" \
-		-e "s/(__iomem[[:space:]]\{1,\}/ (/g" \
-		-e "s/[[:space:]]__attribute_const__[[:space:]]\{1,\}/\ /g" \
-		-e "s/[[:space:]]__attribute_const__$$//" \
-		-e "/^\#include <linux\/compiler.h>/d"
-
+# called may set destination dir (when installing to asm/)
 _dst := $(if $(dst),$(dst),$(obj))
 
-ifeq (,$(patsubst include/asm/%,,$(obj)/))
-# For producing the generated stuff in include/asm for biarch builds, include
-# both sets of Kbuild files; we'll generate anything which is mentioned in
-# _either_ arch, and recurse into subdirectories which are mentioned in either
-# arch. Since some directories may exist in one but not the other, we must
-# use $(wildcard...). 
-GENASM := 1
-archasm	   := $(subst include/asm,asm-$(ARCH),$(obj))
-altarchasm := $(subst include/asm,asm-$(ALTARCH),$(obj))
-KBUILDFILES := $(wildcard $(srctree)/include/$(archasm)/Kbuild $(srctree)/include/$(altarchasm)/Kbuild)
-else
-KBUILDFILES := $(srctree)/$(obj)/Kbuild
-endif
+kbuild-file := $(srctree)/$(obj)/Kbuild
+include $(kbuild-file)
 
-include $(KBUILDFILES)
+include scripts/Kbuild.include
 
-include scripts/Kbuild.include 
+install       := $(INSTALL_HDR_PATH)/$(_dst)
 
-# If this is include/asm-$(ARCH) and there's no $(ALTARCH), then
-# override $(_dst) so that we install to include/asm directly.
-# Unless $(BIASMDIR) is set, in which case we're probably doing
-# a 'headers_install_all' build and we should keep the -$(ARCH)
-# in the directory name.
-ifeq ($(obj)$(ALTARCH),include/asm-$(ARCH)$(BIASMDIR))
-     _dst := include/asm
-endif
+header-y      := $(sort $(header-y) $(unifdef-y))
+subdirs       := $(patsubst %/,%,$(filter %/, $(header-y)))
+header-y      := $(filter-out %/, $(header-y))
 
-header-y	:= $(sort $(header-y))
-unifdef-y	:= $(sort $(unifdef-y))
-subdir-y	:= $(patsubst %/,%,$(filter %/, $(header-y)))
-header-y	:= $(filter-out %/, $(header-y))
-header-y	:= $(filter-out $(unifdef-y),$(header-y))
+# files used to track state of install/check
+install-file  := $(install)/.install
+check-file    := $(install)/.check
 
-# stamp files for header checks
-check-y		:= $(patsubst %,.check.%,$(header-y) $(unifdef-y) $(objhdr-y))
+# all headers files for this dir
+all-files     := $(header-y) $(objhdr-y)
+input-files   := $(addprefix $(srctree)/$(obj)/,$(header-y)) \
+                 $(addprefix $(objtree)/$(obj)/,$(objhdr-y))
+output-files  := $(addprefix $(install)/, $(all-files))
 
 # Work out what needs to be removed
-oldheaders	:= $(patsubst $(INSTALL_HDR_PATH)/$(_dst)/%,%,$(wildcard $(INSTALL_HDR_PATH)/$(_dst)/*.h))
-unwanted	:= $(filter-out $(header-y) $(unifdef-y) $(objhdr-y),$(oldheaders))
+oldheaders    := $(patsubst $(install)/%,%,$(wildcard $(install)/*.h))
+unwanted      := $(filter-out $(all-files),$(oldheaders))
 
-oldcheckstamps	:= $(patsubst $(INSTALL_HDR_PATH)/$(_dst)/%,%,$(wildcard $(INSTALL_HDR_PATH)/$(_dst)/.check.*.h))
-unwanted	+= $(filter-out $(check-y),$(oldcheckstamps))
+# Prefix unwanted with full paths to $(INSTALL_HDR_PATH)
+unwanted-file := $(addprefix $(install)/, $(unwanted))
 
-# Prefix them all with full paths to $(INSTALL_HDR_PATH)
-header-y 	:= $(patsubst %,$(INSTALL_HDR_PATH)/$(_dst)/%,$(header-y))
-unifdef-y 	:= $(patsubst %,$(INSTALL_HDR_PATH)/$(_dst)/%,$(unifdef-y))
-objhdr-y 	:= $(patsubst %,$(INSTALL_HDR_PATH)/$(_dst)/%,$(objhdr-y))
-check-y 	:= $(patsubst %,$(INSTALL_HDR_PATH)/$(_dst)/%,$(check-y))
+printdir = $(patsubst $(INSTALL_HDR_PATH)/%/,%,$(dir $@))
 
+quiet_cmd_install = INSTALL $(printdir) ($(words $(all-files))\
+                            file$(if $(word 2, $(all-files)),s))
+      cmd_install = \
+        $(PERL) $< $(srctree)/$(obj) $(install) $(SRCARCH) $(header-y); \
+        $(PERL) $< $(objtree)/$(obj) $(install) $(SRCARCH) $(objhdr-y); \
+        touch $@
 
-ifdef ALTARCH
-ifeq ($(obj),include/asm-$(ARCH))
-altarch-y	:= altarch-dir
-endif
-endif
+quiet_cmd_remove = REMOVE  $(unwanted)
+      cmd_remove = rm -f $(unwanted-file)
 
-# Make the definitions visible for recursive make invocations
-export ALTARCH
-export ARCHDEF
-export ALTARCHDEF
-
-quiet_cmd_o_hdr_install   = INSTALL $(patsubst $(INSTALL_HDR_PATH)/%,%,$@)
-      cmd_o_hdr_install   = cp $(patsubst $(INSTALL_HDR_PATH)/$(_dst)/%,$(objtree)/$(obj)/%,$@) \
-			    $(INSTALL_HDR_PATH)/$(_dst)
-
-quiet_cmd_headers_install = INSTALL $(patsubst $(INSTALL_HDR_PATH)/%,%,$@)
-      cmd_headers_install = $(HDRSED) $(patsubst $(INSTALL_HDR_PATH)/$(_dst)/%,$(srctree)/$(obj)/%,$@)	\
-			    > $@
-
-quiet_cmd_unifdef	  = UNIFDEF $(patsubst $(INSTALL_HDR_PATH)/%,%,$@)
-      cmd_unifdef	  = $(UNIFDEF) $(patsubst $(INSTALL_HDR_PATH)/$(_dst)/%,$(srctree)/$(obj)/%,$@) \
-				   | $(HDRSED) > $@ || :
-
-quiet_cmd_check		  = CHECK   $(patsubst $(INSTALL_HDR_PATH)/$(_dst)/.check.%,$(_dst)/%,$@)
-      cmd_check		  = $(CONFIG_SHELL) $(srctree)/scripts/hdrcheck.sh \
-                              $(INSTALL_HDR_PATH)/include $(subst /.check.,/,$@) $@
-
-quiet_cmd_remove	  = REMOVE  $(_dst)/$@
-      cmd_remove	  = rm -f $(INSTALL_HDR_PATH)/$(_dst)/$@
-
-quiet_cmd_mkdir		  = MKDIR   $(patsubst $(INSTALL_HDR_PATH)/%,%,$@)
-      cmd_mkdir		  = mkdir -p $@
-
-quiet_cmd_gen		  = GEN     $(patsubst $(INSTALL_HDR_PATH)/%,%,$@)
-      cmd_gen		  = \
-FNAME=$(patsubst $(INSTALL_HDR_PATH)/$(_dst)/%,%,$@);			\
-STUBDEF=__ASM_STUB_`echo $$FNAME | tr a-z.- A-Z__`;			\
-(echo "/* File autogenerated by 'make headers_install' */" ;		\
-echo "\#ifndef $$STUBDEF" ;						\
-echo "\#define $$STUBDEF" ;						\
-echo "\# if $(ARCHDEF)" ;						\
-if [ -r $(subst /$(_dst)/,/include/$(archasm)/,$@) ]; then		\
-	echo "\#  include <$(archasm)/$$FNAME>" ;			\
-else									\
-	echo "\#  error $(archasm)/$$FNAME does not exist in"		\
-			"the $(ARCH) architecture" ;			\
-fi ;									\
-echo "\# elif $(ALTARCHDEF)" ;						\
-if [ -r $(subst /$(_dst)/,/include/$(altarchasm)/,$@) ]; then		\
-	echo "\#  include <$(altarchasm)/$$FNAME>" ;			\
-else									\
-	echo "\#  error $(altarchasm)/$$FNAME does not exist in"	\
-			"the $(ALTARCH) architecture" ;			\
-fi ;									\
-echo "\# else" ;							\
-echo "\#  warning This machine appears to be"				\
-		 "neither $(ARCH) nor $(ALTARCH)." ;			\
-echo "\# endif" ;							\
-echo "\#endif /* $$STUBDEF */" ;					\
-) > $@
-
-.PHONY: __headersinst __headerscheck
-
-ifdef HDRCHECK
-__headerscheck: $(subdir-y) $(check-y)
-	@true
-
-$(check-y) : $(INSTALL_HDR_PATH)/$(_dst)/.check.%.h : $(INSTALL_HDR_PATH)/$(_dst)/%.h 
-	$(call cmd,check)
-
-# Other dependencies for $(check-y)
-include /dev/null $(wildcard $(check-y))
-
-# ... but leave $(check-y) as .PHONY for now until those deps are actually correct.
-.PHONY: $(check-y)
+quiet_cmd_check = CHECK   $(printdir) ($(words $(all-files)) files)
+      cmd_check = $(PERL) $< $(INSTALL_HDR_PATH)/include $(SRCARCH) \
+                  $(addprefix $(install)/, $(all-files));           \
+	          touch $@
 
-else
-# Rules for installing headers
-__headersinst: $(subdir-y) $(header-y) $(unifdef-y) $(altarch-y) $(objhdr-y)
-	@true
+PHONY += __headersinst __headerscheck
 
-$(objhdr-y) $(subdir-y) $(header-y) $(unifdef-y): | $(INSTALL_HDR_PATH)/$(_dst) $(unwanted)
-
-$(INSTALL_HDR_PATH)/$(_dst):
-	$(call cmd,mkdir)
-
-.PHONY: $(unwanted)
-$(unwanted):
-	$(call cmd,remove)
+ifndef HDRCHECK
+# Rules for installing headers
+__headersinst: $(subdirs) $(install-file)
+	@:
 
-ifdef GENASM
-$(objhdr-y) $(header-y) $(unifdef-y): $(KBUILDFILES)
-	$(call cmd,gen)
+targets += $(install-file)
+$(install-file): scripts/headers_install.pl $(input-files) FORCE
+	$(if $(unwanted),$(call cmd,remove),)
+	$(if $(wildcard $(dir $@)),,$(shell mkdir -p $(dir $@)))
+	$(call if_changed,install)
 
 else
-$(objhdr-y) :		$(INSTALL_HDR_PATH)/$(_dst)/%.h: $(objtree)/$(obj)/%.h $(KBUILDFILES)
-	$(call cmd,o_hdr_install)
+__headerscheck: $(subdirs) $(check-file)
+	@:
 
-$(header-y) :		$(INSTALL_HDR_PATH)/$(_dst)/%.h: $(srctree)/$(obj)/%.h $(KBUILDFILES)
-	$(call cmd,headers_install)
+targets += $(check-file)
+$(check-file): scripts/headers_check.pl $(output-files) FORCE
+	$(call if_changed,check)
 
-$(unifdef-y) :		$(INSTALL_HDR_PATH)/$(_dst)/%.h: $(srctree)/$(obj)/%.h $(KBUILDFILES)
-	$(call cmd,unifdef)
-endif
 endif
 
-hdrinst := -rR -f $(srctree)/scripts/Makefile.headersinst obj
+# Recursion
+hdr-inst := -rR -f $(srctree)/scripts/Makefile.headersinst obj
+.PHONY: $(subdirs)
+$(subdirs):
+	$(Q)$(MAKE) $(hdr-inst)=$(obj)/$@ dst=$(_dst)/$@
 
-.PHONY: altarch-dir
-# All the files in the normal arch dir must be created first, since we test
-# for their existence.
-altarch-dir: $(subdir-y) $(header-y) $(unifdef-y) $(objhdr-y)
-	$(Q)$(MAKE) $(hdrinst)=include/asm-$(ALTARCH) dst=include/asm-$(ALTARCH)
-	$(Q)$(MAKE) $(hdrinst)=include/asm dst=include/asm$(BIASMDIR)
+targets := $(wildcard $(sort $(targets)))
+cmd_files := $(wildcard \
+             $(foreach f,$(targets),$(dir $(f)).$(notdir $(f)).cmd))
 
-# Recursion
-.PHONY: $(subdir-y)
-$(subdir-y):
-	$(Q)$(MAKE) $(hdrinst)=$(obj)/$@ dst=$(_dst)/$@ rel=../$(rel)
+ifneq ($(cmd_files),)
+	include $(cmd_files)
+endif
+
+.PHONY: $(PHONY)
+PHONY += FORCE
+FORCE: ;
diff --git a/scripts/checkstack.pl b/scripts/checkstack.pl
index 340ad6920511..3eca62566d6b 100755
--- a/scripts/checkstack.pl
+++ b/scripts/checkstack.pl
@@ -26,12 +26,17 @@
 # $& (whole re) matches the complete objdump line with the stack growth
 # $1 (first bracket) matches the size of the stack growth
 #
+# $dre is similar, but for dynamic stack redutions:
+# $& (whole re) matches the complete objdump line with the stack growth
+# $1 (first bracket) matches the dynamic amount of the stack growth
+#
 # use anything else and feel the pain ;)
-my (@stack, $re, $x, $xs);
+my (@stack, $re, $dre, $x, $xs);
 {
 	my $arch = shift;
 	if ($arch eq "") {
 		$arch = `uname -m`;
+		chomp($arch);
 	}
 
 	$x	= "[0-9a-f]";	# hex character
@@ -46,9 +51,11 @@ my (@stack, $re, $x, $xs);
 	} elsif ($arch =~ /^i[3456]86$/) {
 		#c0105234:       81 ec ac 05 00 00       sub    $0x5ac,%esp
 		$re = qr/^.*[as][du][db]    \$(0x$x{1,8}),\%esp$/o;
+		$dre = qr/^.*[as][du][db]    (%.*),\%esp$/o;
 	} elsif ($arch eq 'x86_64') {
 		#    2f60:	48 81 ec e8 05 00 00 	sub    $0x5e8,%rsp
 		$re = qr/^.*[as][du][db]    \$(0x$x{1,8}),\%rsp$/o;
+		$dre = qr/^.*[as][du][db]    (\%.*),\%rsp$/o;
 	} elsif ($arch eq 'ia64') {
 		#e0000000044011fc:       01 0f fc 8c     adds r12=-384,r12
 		$re = qr/.*adds.*r12=-(([0-9]{2}|[3-9])[0-9]{2}),r12/o;
@@ -85,7 +92,7 @@ my (@stack, $re, $x, $xs);
 		#   0:   00 e8 38 01     LINK 0x4e0;
 		$re = qr/.*[[:space:]]LINK[[:space:]]*(0x$x{1,8})/o;
 	} else {
-		print("wrong or unknown architecture\n");
+		print("wrong or unknown architecture \"$arch\"\n");
 		exit
 	}
 }
@@ -141,6 +148,22 @@ while (my $line = <STDIN>) {
 		next if ($size < 100);
 		push @stack, "$intro$size\n";
 	}
+	elsif (defined $dre && $line =~ m/$dre/) {
+		my $size = "Dynamic ($1)";
+
+		next if $line !~ m/^($xs*)/;
+		my $addr = $1;
+		$addr =~ s/ /0/g;
+		$addr = "0x$addr";
+
+		my $intro = "$addr $func [$file]:";
+		my $padlen = 56 - length($intro);
+		while ($padlen > 0) {
+			$intro .= '	';
+			$padlen -= 8;
+		}
+		push @stack, "$intro$size\n";
+	}
 }
 
 print sort bysize @stack;
diff --git a/scripts/diffconfig b/scripts/diffconfig
new file mode 100755
index 000000000000..b91f3e34d44d
--- /dev/null
+++ b/scripts/diffconfig
@@ -0,0 +1,129 @@
+#!/usr/bin/python
+#
+# diffconfig - a tool to compare .config files.
+#
+# originally written in 2006 by Matt Mackall
+#  (at least, this was in his bloatwatch source code)
+# last worked on 2008 by Tim Bird
+#
+
+import sys, os
+
+def usage():
+    print """Usage: diffconfig [-h] [-m] [<config1> <config2>]
+
+Diffconfig is a simple utility for comparing two .config files.
+Using standard diff to compare .config files often includes extraneous and
+distracting information.  This utility produces sorted output with only the
+changes in configuration values between the two files.
+
+Added and removed items are shown with a leading plus or minus, respectively.
+Changed items show the old and new values on a single line.
+
+If -m is specified, then output will be in "merge" style, which has the
+changed and new values in kernel config option format.
+
+If no config files are specified, .config and .config.old are used.
+
+Example usage:
+ $ diffconfig .config config-with-some-changes
+-EXT2_FS_XATTR  n
+-EXT2_FS_XIP  n
+ CRAMFS  n -> y
+ EXT2_FS  y -> n
+ LOG_BUF_SHIFT  14 -> 16
+ PRINTK_TIME  n -> y
+"""
+    sys.exit(0)
+
+# returns a dictionary of name/value pairs for config items in the file
+def readconfig(config_file):
+    d = {}
+    for line in config_file:
+        line = line[:-1]
+        if line[:7] == "CONFIG_":
+            name, val = line[7:].split("=", 1)
+            d[name] = val
+        if line[-11:] == " is not set":
+            d[line[9:-11]] = "n"
+    return d
+
+def print_config(op, config, value, new_value):
+    global merge_style
+
+    if merge_style:
+        if new_value:
+            if new_value=="n":
+                print "# CONFIG_%s is not set" % config
+            else:
+                print "CONFIG_%s=%s" % (config, new_value)
+    else:
+        if op=="-":
+            print "-%s %s" % (config, value)
+        elif op=="+":
+            print "+%s %s" % (config, new_value)
+        else:
+            print " %s %s -> %s" % (config, value, new_value)
+
+def main():
+    global merge_style
+
+    # parse command line args
+    if ("-h" in sys.argv or "--help" in sys.argv):
+	usage()
+
+    merge_style = 0
+    if "-m" in sys.argv:
+        merge_style = 1
+        sys.argv.remove("-m")
+
+    argc = len(sys.argv)
+    if not (argc==1 or argc == 3):
+        print "Error: incorrect number of arguments or unrecognized option"
+        usage()
+
+    if argc == 1:
+        # if no filenames given, assume .config and .config.old
+        build_dir=""
+        if os.environ.has_key("KBUILD_OUTPUT"):
+            build_dir = os.environ["KBUILD_OUTPUT"]+"/"
+
+        configa_filename = build_dir + ".config.old"
+        configb_filename = build_dir + ".config"
+    else:
+        configa_filename = sys.argv[1]
+        configb_filename = sys.argv[2]
+
+    a = readconfig(file(configa_filename))
+    b = readconfig(file(configb_filename))
+
+    # print items in a but not b (accumulate, sort and print)
+    old = []
+    for config in a:
+        if config not in b:
+            old.append(config)
+    old.sort()
+    for config in old:
+        print_config("-", config, a[config], None)
+        del a[config]
+
+    # print items that changed (accumulate, sort, and print)
+    changed = []
+    for config in a:
+        if a[config] != b[config]:
+            changed.append(config)
+        else:
+            del b[config]
+    changed.sort()
+    for config in changed:
+        print_config("->", config, a[config], b[config])
+        del b[config]
+
+    # now print items in b but not in a
+    # (items from b that were in a were removed above)
+    new = b.keys()
+    new.sort()
+    for config in new:
+        print_config("+", config, None, b[config])
+
+main()
diff --git a/scripts/genksyms/genksyms.c b/scripts/genksyms/genksyms.c
index 4f8a3007e457..c249274e005a 100644
--- a/scripts/genksyms/genksyms.c
+++ b/scripts/genksyms/genksyms.c
@@ -545,6 +545,8 @@ int main(int argc, char **argv)
 			}
 			fputs(sym->name, dumpfile);
 			putc(' ', dumpfile);
+			if (sym->is_extern)
+				fputs("extern ", dumpfile);
 			print_list(dumpfile, sym->defn);
 			putc('\n', dumpfile);
 
diff --git a/scripts/genksyms/lex.c_shipped b/scripts/genksyms/lex.c_shipped
index 2a176988d468..2ac23bcca5b5 100644
--- a/scripts/genksyms/lex.c_shipped
+++ b/scripts/genksyms/lex.c_shipped
@@ -6,10 +6,19 @@
 
 /* A lexical scanner generated by flex */
 
+/* %not-for-header */
+
+/* %if-c-only */
+/* %if-not-reentrant */
+
+/* %endif */
+/* %endif */
+/* %ok-for-header */
+
 #define FLEX_SCANNER
 #define YY_FLEX_MAJOR_VERSION 2
 #define YY_FLEX_MINOR_VERSION 5
-#define YY_FLEX_SUBMINOR_VERSION 33
+#define YY_FLEX_SUBMINOR_VERSION 35
 #if YY_FLEX_SUBMINOR_VERSION > 0
 #define FLEX_BETA
 #endif
@@ -47,7 +56,7 @@
 
 /* C99 systems have <inttypes.h>. Non-C99 systems may or may not. */
 
-#if __STDC_VERSION__ >= 199901L
+#if defined (__STDC_VERSION__) && __STDC_VERSION__ >= 199901L
 
 /* C99 says to define __STDC_LIMIT_MACROS before including stdint.h,
  * if you want the limit (max/min) macros for int types. 
@@ -70,7 +79,6 @@ typedef int flex_int32_t;
 typedef unsigned char flex_uint8_t; 
 typedef unsigned short int flex_uint16_t;
 typedef unsigned int flex_uint32_t;
-#endif /* ! C99 */
 
 /* Limits of integral types. */
 #ifndef INT8_MIN
@@ -101,6 +109,8 @@ typedef unsigned int flex_uint32_t;
 #define UINT32_MAX             (4294967295U)
 #endif
 
+#endif /* ! C99 */
+
 #endif /* ! FLEXINT_H */
 
 /* %endif */
@@ -115,11 +125,12 @@ typedef unsigned int flex_uint32_t;
 
 #else	/* ! __cplusplus */
 
-#if __STDC__
+/* C99 requires __STDC__ to be defined as 1. */
+#if defined (__STDC__)
 
 #define YY_USE_CONST
 
-#endif	/* __STDC__ */
+#endif	/* defined (__STDC__) */
 #endif	/* ! __cplusplus */
 
 #ifdef YY_USE_CONST
@@ -218,14 +229,9 @@ extern FILE *yyin, *yyout;
 
 #define unput(c) yyunput( c, (yytext_ptr)  )
 
-/* The following is because we cannot portably get our hands on size_t
- * (without autoconf's help, which isn't available because we want
- * flex-generated scanners to compile on their own).
- */
-
 #ifndef YY_TYPEDEF_YY_SIZE_T
 #define YY_TYPEDEF_YY_SIZE_T
-typedef unsigned int yy_size_t;
+typedef size_t yy_size_t;
 #endif
 
 #ifndef YY_STRUCT_YY_BUFFER_STATE
@@ -401,7 +407,7 @@ void yyfree (void *  );
 /* %% [1.0] yytext/yyin/yyout/yy_state_type/yylineno etc. def's & init go here */
 /* Begin user sect3 */
 
-#define yywrap() 1
+#define yywrap(n) 1
 #define YY_SKIP_YYWRAP
 
 #define FLEX_DEBUG
@@ -613,8 +619,8 @@ int yy_flex_debug = 1;
 
 static yyconst flex_int16_t yy_rule_linenum[13] =
     {   0,
-       69,   70,   71,   74,   77,   78,   79,   85,   86,   87,
-       89,   92
+       71,   72,   73,   76,   79,   80,   81,   87,   88,   89,
+       91,   94
     } ;
 
 /* The intent behind this definition is that it'll catch
@@ -665,7 +671,8 @@ char *yytext;
    quite so pedantic.  */
 
 /* We don't do multiple input files.  */
-#line 669 "scripts/genksyms/lex.c"
+#define YY_NO_INPUT 1
+#line 676 "scripts/genksyms/lex.c"
 
 #define INITIAL 0
 #define V2_TOKENS 1
@@ -695,9 +702,39 @@ static int yy_init_globals (void );
 /* %endif */
 /* %if-reentrant */
 /* %endif */
+/* %endif End reentrant structures and macros. */
+
+/* Accessor methods to globals.
+   These are made visible to non-reentrant scanners for convenience. */
+
+int yylex_destroy (void );
+
+int yyget_debug (void );
+
+void yyset_debug (int debug_flag  );
+
+YY_EXTRA_TYPE yyget_extra (void );
+
+void yyset_extra (YY_EXTRA_TYPE user_defined  );
+
+FILE *yyget_in (void );
+
+void yyset_in  (FILE * in_str  );
+
+FILE *yyget_out (void );
+
+void yyset_out  (FILE * out_str  );
+
+int yyget_leng (void );
+
+char *yyget_text (void );
+
+int yyget_lineno (void );
+
+void yyset_lineno (int line_number  );
+
 /* %if-bison-bridge */
 /* %endif */
-/* %endif End reentrant structures and macros. */
 
 /* Macros after this point can all be overridden by user definitions in
  * section 1.
@@ -756,7 +793,7 @@ static int input (void );
 /* This used to be an fputs(), but since the string might contain NUL's,
  * we now use fwrite().
  */
-#define ECHO (void) fwrite( yytext, yyleng, 1, yyout )
+#define ECHO fwrite( yytext, yyleng, 1, yyout )
 /* %endif */
 /* %if-c++-only C++ definition */
 /* %endif */
@@ -881,12 +918,12 @@ YY_DECL
 	register int yy_act;
     
 /* %% [7.0] user's declarations go here */
-#line 65 "scripts/genksyms/lex.l"
+#line 67 "scripts/genksyms/lex.l"
 
 
 
  /* Keep track of our location in the original source files.  */
-#line 890 "scripts/genksyms/lex.c"
+#line 927 "scripts/genksyms/lex.c"
 
 	if ( !(yy_init) )
 		{
@@ -1004,42 +1041,42 @@ do_action:	/* This label is used only to access EOF actions. */
 case 1:
 /* rule 1 can match eol */
 YY_RULE_SETUP
-#line 69 "scripts/genksyms/lex.l"
+#line 71 "scripts/genksyms/lex.l"
 return FILENAME;
 	YY_BREAK
 case 2:
 /* rule 2 can match eol */
 YY_RULE_SETUP
-#line 70 "scripts/genksyms/lex.l"
+#line 72 "scripts/genksyms/lex.l"
 cur_line++;
 	YY_BREAK
 case 3:
 /* rule 3 can match eol */
 YY_RULE_SETUP
-#line 71 "scripts/genksyms/lex.l"
+#line 73 "scripts/genksyms/lex.l"
 cur_line++;
 	YY_BREAK
 /* Ignore all other whitespace.  */
 case 4:
 YY_RULE_SETUP
-#line 74 "scripts/genksyms/lex.l"
+#line 76 "scripts/genksyms/lex.l"
 ;
 	YY_BREAK
 case 5:
 /* rule 5 can match eol */
 YY_RULE_SETUP
-#line 77 "scripts/genksyms/lex.l"
+#line 79 "scripts/genksyms/lex.l"
 return STRING;
 	YY_BREAK
 case 6:
 /* rule 6 can match eol */
 YY_RULE_SETUP
-#line 78 "scripts/genksyms/lex.l"
+#line 80 "scripts/genksyms/lex.l"
 return CHAR;
 	YY_BREAK
 case 7:
 YY_RULE_SETUP
-#line 79 "scripts/genksyms/lex.l"
+#line 81 "scripts/genksyms/lex.l"
 return IDENT;
 	YY_BREAK
 /* The Pedant requires that the other C multi-character tokens be
@@ -1048,36 +1085,36 @@ return IDENT;
     around them properly.  */
 case 8:
 YY_RULE_SETUP
-#line 85 "scripts/genksyms/lex.l"
+#line 87 "scripts/genksyms/lex.l"
 return OTHER;
 	YY_BREAK
 case 9:
 YY_RULE_SETUP
-#line 86 "scripts/genksyms/lex.l"
+#line 88 "scripts/genksyms/lex.l"
 return INT;
 	YY_BREAK
 case 10:
 YY_RULE_SETUP
-#line 87 "scripts/genksyms/lex.l"
+#line 89 "scripts/genksyms/lex.l"
 return REAL;
 	YY_BREAK
 case 11:
 YY_RULE_SETUP
-#line 89 "scripts/genksyms/lex.l"
+#line 91 "scripts/genksyms/lex.l"
 return DOTS;
 	YY_BREAK
 /* All other tokens are single characters.  */
 case 12:
 YY_RULE_SETUP
-#line 92 "scripts/genksyms/lex.l"
+#line 94 "scripts/genksyms/lex.l"
 return yytext[0];
 	YY_BREAK
 case 13:
 YY_RULE_SETUP
-#line 95 "scripts/genksyms/lex.l"
+#line 97 "scripts/genksyms/lex.l"
 ECHO;
 	YY_BREAK
-#line 1081 "scripts/genksyms/lex.c"
+#line 1118 "scripts/genksyms/lex.c"
 case YY_STATE_EOF(INITIAL):
 case YY_STATE_EOF(V2_TOKENS):
 	yyterminate();
@@ -1346,6 +1383,14 @@ static int yy_get_next_buffer (void)
 	else
 		ret_val = EOB_ACT_CONTINUE_SCAN;
 
+	if ((yy_size_t) ((yy_n_chars) + number_to_move) > YY_CURRENT_BUFFER_LVALUE->yy_buf_size) {
+		/* Extend the array by 50%, plus the number we really need. */
+		yy_size_t new_size = (yy_n_chars) + number_to_move + ((yy_n_chars) >> 1);
+		YY_CURRENT_BUFFER_LVALUE->yy_ch_buf = (char *) yyrealloc((void *) YY_CURRENT_BUFFER_LVALUE->yy_ch_buf,new_size  );
+		if ( ! YY_CURRENT_BUFFER_LVALUE->yy_ch_buf )
+			YY_FATAL_ERROR( "out of dynamic memory in yy_get_next_buffer()" );
+	}
+
 	(yy_n_chars) += number_to_move;
 	YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars)] = YY_END_OF_BUFFER_CHAR;
 	YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars) + 1] = YY_END_OF_BUFFER_CHAR;
@@ -1851,7 +1896,9 @@ static void yyensure_buffer_stack (void)
 		(yy_buffer_stack) = (struct yy_buffer_state**)yyalloc
 								(num_to_alloc * sizeof(struct yy_buffer_state*)
 								);
-		
+		if ( ! (yy_buffer_stack) )
+			YY_FATAL_ERROR( "out of dynamic memory in yyensure_buffer_stack()" );
+								  
 		memset((yy_buffer_stack), 0, num_to_alloc * sizeof(struct yy_buffer_state*));
 				
 		(yy_buffer_stack_max) = num_to_alloc;
@@ -1869,6 +1916,8 @@ static void yyensure_buffer_stack (void)
 								((yy_buffer_stack),
 								num_to_alloc * sizeof(struct yy_buffer_state*)
 								);
+		if ( ! (yy_buffer_stack) )
+			YY_FATAL_ERROR( "out of dynamic memory in yyensure_buffer_stack()" );
 
 		/* zero only the new slots.*/
 		memset((yy_buffer_stack) + (yy_buffer_stack_max), 0, grow_size * sizeof(struct yy_buffer_state*));
@@ -2092,7 +2141,7 @@ void yyset_debug (int  bdebug )
 /* %if-reentrant */
 /* %if-bison-bridge */
 /* %endif */
-/* %endif */
+/* %endif if-c-only */
 
 /* %if-c-only */
 static int yy_init_globals (void)
@@ -2124,13 +2173,9 @@ static int yy_init_globals (void)
 }
 /* %endif */
 
-/* %if-c-or-c++ */
-/* %if-c-only */
+/* %if-c-only SNIP! this currently causes conflicts with the c++ scanner */
 /* yylex_destroy is for both reentrant and non-reentrant scanners. */
 int yylex_destroy  (void)
-/* %endif */
-/* %if-c++-only */
-/* %endif */
 {
     
     /* Pop the buffer stack, destroying each element. */
@@ -2144,11 +2189,6 @@ int yylex_destroy  (void)
 	yyfree((yy_buffer_stack) );
 	(yy_buffer_stack) = NULL;
 
-/* %if-c++-only */
-/* %endif */
-
-/* %if-c-only */
-
     /* Reset the globals. This is important in a non-reentrant scanner so the next time
      * yylex() is called, initialization will occur. */
     yy_init_globals( );
@@ -2156,7 +2196,6 @@ int yylex_destroy  (void)
 /* %if-reentrant */
 /* %endif */
     return 0;
-/* %endif */
 }
 /* %endif */
 
@@ -2213,7 +2252,7 @@ void yyfree (void * ptr )
 
 /* %ok-for-header */
 
-#line 95 "scripts/genksyms/lex.l"
+#line 97 "scripts/genksyms/lex.l"
 
 
 
diff --git a/scripts/genksyms/lex.l b/scripts/genksyms/lex.l
index 5e544a06678b..fe50ff9dacd0 100644
--- a/scripts/genksyms/lex.l
+++ b/scripts/genksyms/lex.l
@@ -62,6 +62,8 @@ MC_TOKEN		([~%^&*+=|<>/-]=)|(&&)|("||")|(->)|(<<)|(>>)
 /* We don't do multiple input files.  */
 %option noyywrap
 
+%option noinput
+
 %%
 
 
diff --git a/scripts/genksyms/parse.c_shipped b/scripts/genksyms/parse.c_shipped
index 3e6079f36b9f..eaee44e66a43 100644
--- a/scripts/genksyms/parse.c_shipped
+++ b/scripts/genksyms/parse.c_shipped
@@ -504,7 +504,7 @@ static const yytype_uint16 yyprhs[] =
      239,   242,   245,   247,   248,   250,   252,   257,   262,   265,
      269,   273,   277,   278,   280,   283,   287,   291,   292,   294,
      296,   299,   303,   306,   307,   309,   311,   315,   318,   321,
-     323,   326,   327,   329,   332,   333,   335
+     323,   326,   327,   330,   333,   334,   336
 };
 
 /* YYRHS -- A `-1'-separated list of the rules' RHS.  */
@@ -542,9 +542,9 @@ static const yytype_int8 yyrhs[] =
       -1,    -1,    89,    -1,    90,    -1,    89,    90,    -1,    64,
       91,    44,    -1,     1,    44,    -1,    -1,    92,    -1,    93,
       -1,    92,    46,    93,    -1,    76,    95,    -1,    37,    94,
-      -1,    94,    -1,    52,    34,    -1,    -1,    31,    -1,    30,
-      44,    -1,    -1,    30,    -1,    29,    47,    37,    49,    44,
-      -1
+      -1,    94,    -1,    52,    34,    -1,    -1,    95,    31,    -1,
+      30,    44,    -1,    -1,    30,    -1,    29,    47,    37,    49,
+      44,    -1
 };
 
 /* YYRLINE[YYN] -- source line where rule number YYN was defined.  */
@@ -647,7 +647,7 @@ static const yytype_uint8 yyr2[] =
        2,     2,     1,     0,     1,     1,     4,     4,     2,     3,
        3,     3,     0,     1,     2,     3,     3,     0,     1,     1,
        2,     3,     2,     0,     1,     1,     3,     2,     2,     1,
-       2,     0,     1,     2,     0,     1,     5
+       2,     0,     2,     2,     0,     1,     5
 };
 
 /* YYDEFACT[STATE-NAME] -- Default rule to reduce with in state
@@ -667,9 +667,9 @@ static const yytype_uint8 yydefact[] =
        0,    66,   125,   101,   121,    71,     0,     7,   112,   106,
       76,    77,     0,     0,     0,   121,    75,     0,   114,   115,
      119,   105,     0,   110,   124,     0,    36,     0,    73,    72,
-      61,    20,   122,   102,     0,    93,     0,    84,    87,    88,
-     118,     0,    76,     0,   120,    74,   117,    80,     0,   111,
-       0,    35,   126,     0,    21,   103,    70,    94,    56,     0,
+      61,    20,   102,     0,    93,     0,    84,    87,    88,   118,
+       0,    76,     0,   120,    74,   117,    80,     0,   111,     0,
+      35,   126,   122,     0,    21,   103,    70,    94,    56,     0,
       93,    90,    92,    69,    83,     0,    82,    81,     0,     0,
      116,   104,     0,    95,     0,    91,    98,     0,    85,    89,
       79,    78,   100,    99,     0,     0,    97,    96
@@ -680,44 +680,44 @@ static const yytype_int16 yydefgoto[] =
 {
       -1,     1,     2,     3,    35,    72,    55,    36,    64,    65,
       66,    75,    38,    39,    40,    41,    42,    67,    86,    87,
-      43,   114,    69,   105,   106,   126,   127,   128,   129,   151,
+      43,   114,    69,   105,   106,   125,   126,   127,   128,   151,
      152,    44,   144,   145,    54,    76,    77,    78,   107,   108,
-     109,   110,   123,    45,    94,    46
+     109,   110,   122,    45,    94,    46
 };
 
 /* YYPACT[STATE-NUM] -- Index in YYTABLE of the portion describing
    STATE-NUM.  */
-#define YYPACT_NINF -135
+#define YYPACT_NINF -134
 static const yytype_int16 yypact[] =
 {
-    -135,    11,  -135,   312,  -135,  -135,    24,  -135,  -135,  -135,
-    -135,  -135,   -23,  -135,    -2,  -135,  -135,  -135,  -135,  -135,
-    -135,  -135,  -135,  -135,   -17,  -135,   -11,  -135,  -135,  -135,
-      -3,    16,    26,  -135,  -135,  -135,  -135,    34,   482,  -135,
-    -135,  -135,  -135,  -135,  -135,  -135,  -135,  -135,  -135,  -135,
-      -8,  -135,    22,    97,  -135,   482,    22,  -135,   482,    56,
-    -135,  -135,    12,    10,    50,    49,  -135,    34,   -13,    15,
-    -135,  -135,   482,  -135,    47,   -25,    51,   145,  -135,  -135,
-      34,  -135,   356,    52,    71,    77,  -135,    10,  -135,  -135,
-      34,  -135,  -135,  -135,    68,  -135,   193,  -135,  -135,  -135,
-      48,  -135,     6,    93,    37,    68,    18,    85,    84,  -135,
-    -135,  -135,    87,  -135,   102,    86,  -135,    89,  -135,  -135,
-    -135,  -135,  -135,    90,    88,   401,    94,   100,   101,  -135,
-    -135,    99,  -135,   108,  -135,  -135,  -135,  -135,   230,  -135,
-     -25,  -135,  -135,   105,  -135,  -135,  -135,  -135,  -135,     9,
-      42,  -135,    28,  -135,  -135,   445,  -135,  -135,   119,   125,
-    -135,  -135,   126,  -135,   128,  -135,  -135,   267,  -135,  -135,
-    -135,  -135,  -135,  -135,   129,   130,  -135,  -135
+    -134,    16,  -134,   312,  -134,  -134,    20,  -134,  -134,  -134,
+    -134,  -134,   -18,  -134,    -3,  -134,  -134,  -134,  -134,  -134,
+    -134,  -134,  -134,  -134,   -26,  -134,   -25,  -134,  -134,  -134,
+      -7,     5,    27,  -134,  -134,  -134,  -134,    46,   482,  -134,
+    -134,  -134,  -134,  -134,  -134,  -134,  -134,  -134,  -134,  -134,
+      -8,  -134,    30,    97,  -134,   482,    30,  -134,   482,     7,
+    -134,  -134,    12,    10,    42,    55,  -134,    46,   -15,    15,
+    -134,  -134,   482,  -134,    25,    26,    47,   145,  -134,  -134,
+      46,  -134,   356,    39,    71,    77,  -134,    10,  -134,  -134,
+      46,  -134,  -134,  -134,  -134,  -134,   193,  -134,  -134,  -134,
+      75,  -134,     6,    95,    43,  -134,    28,    86,    85,  -134,
+    -134,  -134,    88,  -134,   103,    87,  -134,    91,  -134,  -134,
+    -134,  -134,   -23,    90,   401,    94,   101,   102,  -134,  -134,
+      98,  -134,   108,  -134,  -134,   109,  -134,   230,  -134,    26,
+    -134,  -134,  -134,   134,  -134,  -134,  -134,  -134,  -134,     9,
+      48,  -134,    35,  -134,  -134,   445,  -134,  -134,   125,   126,
+    -134,  -134,   128,  -134,   129,  -134,  -134,   267,  -134,  -134,
+    -134,  -134,  -134,  -134,   130,   131,  -134,  -134
 };
 
 /* YYPGOTO[NTERM-NUM].  */
 static const yytype_int16 yypgoto[] =
 {
-    -135,  -135,   179,  -135,  -135,  -135,  -135,   -47,  -135,  -135,
-      91,     0,   -58,   -37,  -135,  -135,  -135,   -73,  -135,  -135,
-     -48,   -32,  -135,   -38,  -135,  -134,  -135,  -135,    29,   -63,
-    -135,  -135,  -135,  -135,   -20,  -135,  -135,   106,  -135,  -135,
-      45,    95,    82,  -135,  -135,  -135
+    -134,  -134,   180,  -134,  -134,  -134,  -134,   -33,  -134,  -134,
+      93,     0,   -58,   -37,  -134,  -134,  -134,   -73,  -134,  -134,
+     -54,   -32,  -134,   -81,  -134,  -133,  -134,  -134,    29,   -50,
+    -134,  -134,  -134,  -134,   -20,  -134,  -134,   110,  -134,  -134,
+      49,    96,    80,  -134,  -134,  -134
 };
 
 /* YYTABLE[YYPACT[STATE-NUM]].  What to do in state STATE-NUM.  If
@@ -727,26 +727,26 @@ static const yytype_int16 yypgoto[] =
 #define YYTABLE_NINF -109
 static const yytype_int16 yytable[] =
 {
-      82,    70,   104,    37,   159,    68,    57,   131,    79,    49,
-     162,     4,   100,    84,    50,    88,   101,    92,    10,    93,
-      52,    51,   102,    63,    71,    97,    56,   103,    20,   104,
-      85,   104,    73,   175,    53,    91,    81,    29,   125,   120,
-      53,    33,   -93,   132,    58,    70,   147,   101,    95,    61,
-     163,   137,   150,   102,    63,    80,   149,    63,   -93,    62,
-      63,   166,    96,    59,   133,   138,   135,   104,    47,    48,
-      60,    61,    80,    53,   132,   167,   150,   150,   101,   147,
-     125,    62,    63,   163,   102,    63,   164,   165,    70,   149,
-      63,    98,    99,    83,    89,    90,   111,   125,    74,   122,
-     103,   117,     7,     8,     9,    10,    11,    12,    13,   125,
+      82,    70,   104,    37,   159,    68,    57,   130,   142,    88,
+     162,    52,    56,    84,    49,    92,     4,    93,    10,    50,
+      51,   132,    79,   134,    71,    53,    53,   143,    20,   104,
+      85,   104,    73,   120,   175,    91,    81,    29,   124,    97,
+      58,    33,   -93,   131,    83,    70,   147,   101,    95,    61,
+     163,   150,    59,   102,    63,    80,   149,    63,   -93,    62,
+      63,   136,    96,   100,    47,    48,   104,   101,   166,    98,
+      99,    60,    80,   102,    63,   137,   150,   150,   103,   124,
+     131,    53,   167,    61,   101,   147,    89,    70,   117,   163,
+     102,    63,   111,    62,    63,   149,    63,   124,    74,   164,
+     165,    90,     7,     8,     9,    10,    11,    12,    13,   124,
       15,    16,    17,    18,    19,    20,    21,    22,    23,    24,
-     118,    26,    27,    28,    29,    30,   119,   134,    33,   139,
-     140,    98,    92,   142,   -22,   141,   154,   146,    34,   161,
-     143,   -22,  -107,   153,   -22,   -22,   112,   155,   156,   -22,
+     118,    26,    27,    28,    29,    30,   119,   103,    33,   133,
+     138,   139,    98,    92,   -22,   141,   140,   154,    34,   146,
+     142,   -22,  -107,   153,   -22,   -22,   112,   156,   155,   -22,
        7,     8,     9,    10,    11,    12,    13,   157,    15,    16,
-      17,    18,    19,    20,    21,    22,    23,    24,   170,    26,
-      27,    28,    29,    30,   171,   172,    33,   173,   176,   177,
-       5,   121,   -22,   113,   169,   160,    34,   136,     0,   -22,
-    -108,     0,   -22,   -22,   124,   130,     0,   -22,     7,     8,
+      17,    18,    19,    20,    21,    22,    23,    24,   161,    26,
+      27,    28,    29,    30,   170,   171,    33,   172,   173,   176,
+     177,     5,   -22,   121,   169,   135,    34,   113,   160,   -22,
+    -108,     0,   -22,   -22,   123,     0,   129,   -22,     7,     8,
        9,    10,    11,    12,    13,     0,    15,    16,    17,    18,
       19,    20,    21,    22,    23,    24,     0,    26,    27,    28,
       29,    30,     0,     0,    33,     0,     0,     0,     0,   -86,
@@ -784,26 +784,26 @@ static const yytype_int16 yytable[] =
 
 static const yytype_int16 yycheck[] =
 {
-      58,    38,    75,     3,   138,    37,    26,     1,    55,    32,
-       1,     0,    37,     1,    37,    63,    41,    30,     8,    32,
-      37,    23,    47,    48,    32,    72,    37,    52,    18,   102,
-      62,   104,    52,   167,    51,    67,    56,    27,    96,    87,
-      51,    31,    33,    37,    47,    82,    37,    41,    33,    37,
-      41,    33,   125,    47,    48,    55,    47,    48,    49,    47,
-      48,    33,    47,    47,   102,    47,   104,   140,    44,    45,
-      44,    37,    72,    51,    37,    47,   149,   150,    41,    37,
-     138,    47,    48,    41,    47,    48,   149,   150,   125,    47,
-      48,    44,    45,    37,    44,    46,    45,   155,     1,    31,
-      52,    49,     5,     6,     7,     8,     9,    10,    11,   167,
+      58,    38,    75,     3,   137,    37,    26,     1,    31,    63,
+       1,    37,    37,     1,    32,    30,     0,    32,     8,    37,
+      23,   102,    55,   104,    32,    51,    51,    50,    18,   102,
+      62,   104,    52,    87,   167,    67,    56,    27,    96,    72,
+      47,    31,    33,    37,    37,    82,    37,    41,    33,    37,
+      41,   124,    47,    47,    48,    55,    47,    48,    49,    47,
+      48,    33,    47,    37,    44,    45,   139,    41,    33,    44,
+      45,    44,    72,    47,    48,    47,   149,   150,    52,   137,
+      37,    51,    47,    37,    41,    37,    44,   124,    49,    41,
+      47,    48,    45,    47,    48,    47,    48,   155,     1,   149,
+     150,    46,     5,     6,     7,     8,     9,    10,    11,   167,
       13,    14,    15,    16,    17,    18,    19,    20,    21,    22,
-      49,    24,    25,    26,    27,    28,    49,    34,    31,    44,
-      46,    44,    30,    44,    37,    49,    36,    49,    41,    34,
-      50,    44,    45,    49,    47,    48,     1,    46,    49,    52,
+      49,    24,    25,    26,    27,    28,    49,    52,    31,    34,
+      44,    46,    44,    30,    37,    44,    49,    36,    41,    49,
+      31,    44,    45,    49,    47,    48,     1,    49,    46,    52,
        5,     6,     7,     8,     9,    10,    11,    49,    13,    14,
-      15,    16,    17,    18,    19,    20,    21,    22,    49,    24,
+      15,    16,    17,    18,    19,    20,    21,    22,    34,    24,
       25,    26,    27,    28,    49,    49,    31,    49,    49,    49,
-       1,    90,    37,    77,   155,   140,    41,   105,    -1,    44,
-      45,    -1,    47,    48,     1,   100,    -1,    52,     5,     6,
+      49,     1,    37,    90,   155,   105,    41,    77,   139,    44,
+      45,    -1,    47,    48,     1,    -1,   100,    52,     5,     6,
        7,     8,     9,    10,    11,    -1,    13,    14,    15,    16,
       17,    18,    19,    20,    21,    22,    -1,    24,    25,    26,
       27,    28,    -1,    -1,    31,    -1,    -1,    -1,    -1,    36,
@@ -855,9 +855,9 @@ static const yytype_uint8 yystos[] =
       46,    74,    30,    32,    97,    33,    47,    60,    44,    45,
       37,    41,    47,    52,    70,    76,    77,    91,    92,    93,
       94,    45,     1,    90,    74,    48,    49,    49,    49,    49,
-      73,    63,    31,    95,     1,    65,    78,    79,    80,    81,
-      94,     1,    37,    76,    34,    76,    95,    33,    47,    44,
-      46,    49,    44,    50,    85,    86,    49,    37,    41,    47,
+      73,    63,    95,     1,    65,    78,    79,    80,    81,    94,
+       1,    37,    76,    34,    76,    95,    33,    47,    44,    46,
+      49,    44,    31,    50,    85,    86,    49,    37,    41,    47,
       70,    82,    83,    49,    36,    46,    49,    49,     1,    78,
       93,    34,     1,    41,    82,    82,    33,    47,    36,    81,
       49,    49,    49,    49,     1,    78,    49,    49
diff --git a/scripts/genksyms/parse.y b/scripts/genksyms/parse.y
index 408cdf82b271..10d7dc724b6d 100644
--- a/scripts/genksyms/parse.y
+++ b/scripts/genksyms/parse.y
@@ -446,7 +446,7 @@ member_bitfield_declarator:
 
 attribute_opt:
 	/* empty */					{ $$ = NULL; }
-	| ATTRIBUTE_PHRASE
+	| attribute_opt ATTRIBUTE_PHRASE
 	;
 
 asm_definition:
diff --git a/scripts/hdrcheck.sh b/scripts/hdrcheck.sh
deleted file mode 100755
index 31598584f871..000000000000
--- a/scripts/hdrcheck.sh
+++ /dev/null
@@ -1,10 +0,0 @@
-#!/bin/sh
-
-for FILE in `grep '^[ \t]*#[ \t]*include[ \t]*<' $2 | cut -f2 -d\< | cut -f1 -d\> | egrep ^linux\|^asm` ; do
-    if [ ! -r $1/$FILE ]; then
-	echo $2 requires $FILE, which does not exist in exported headers
-	exit 1
-    fi
-done
-# FIXME: List dependencies into $3
-touch $3
diff --git a/scripts/headers.sh b/scripts/headers.sh
new file mode 100755
index 000000000000..d33426f866db
--- /dev/null
+++ b/scripts/headers.sh
@@ -0,0 +1,41 @@
+#!/bin/sh
+# Run headers_$1 command for all suitable architectures
+
+# Stop on error
+set -e
+
+do_command()
+{
+	if [ -f ${srctree}/arch/$2/include/asm/Kbuild ]; then
+		make ARCH=$2 KBUILD_HEADERS=$1 headers_$1
+	elif [ -f ${srctree}/include/asm-$2/Kbuild ]; then
+		make ARCH=$2 KBUILD_HEADERS=$1 headers_$1
+	else
+		printf "Ignoring arch: %s\n" ${arch}
+	fi
+}
+
+# Do not try this architecture
+drop="generic um ppc sparc64 cris"
+
+archs=$(ls ${srctree}/arch)
+
+for arch in ${archs}; do
+	case ${arch} in
+	um)        # no userspace export
+		;;
+	ppc)       # headers exported by powerpc
+		;;
+	sparc64)   # headers exported by sparc
+		;;
+	cris)      # headers export are known broken
+		;;
+	*)
+		if [ -d ${srctree}/arch/${arch} ]; then
+			do_command $1 ${arch}
+		fi
+		;;
+	esac
+done
+
+
diff --git a/scripts/headers_check.pl b/scripts/headers_check.pl
new file mode 100644
index 000000000000..15d53a6b1a1f
--- /dev/null
+++ b/scripts/headers_check.pl
@@ -0,0 +1,56 @@
+#!/usr/bin/perl
+#
+# headers_check.pl execute a number of trivial consistency checks
+#
+# Usage: headers_check.pl dir [files...]
+# dir:   dir to look for included files
+# arch:  architecture
+# files: list of files to check
+#
+# The script reads the supplied files line by line and:
+#
+# 1) for each include statement it checks if the
+#    included file actually exists.
+#    Only include files located in asm* and linux* are checked.
+#    The rest are assumed to be system include files.
+#
+# 2) TODO: check for leaked CONFIG_ symbols
+
+use strict;
+use warnings;
+
+my ($dir, $arch, @files) = @ARGV;
+
+my $ret = 0;
+my $line;
+my $lineno = 0;
+my $filename;
+
+foreach my $file (@files) {
+	$filename = $file;
+	open(my $fh, '<', "$filename") or die "$filename: $!\n";
+	$lineno = 0;
+	while ($line = <$fh>) {
+		$lineno++;
+		check_include();
+	}
+	close $fh;
+}
+exit $ret;
+
+sub check_include
+{
+	if ($line =~ m/^\s*#\s*include\s+<((asm|linux).*)>/) {
+		my $inc = $1;
+		my $found;
+		$found = stat($dir . "/" . $inc);
+		if (!$found) {
+			$inc =~ s#asm/#asm-$arch/#;
+			$found = stat($dir . "/" . $inc);
+		}
+		if (!$found) {
+			printf STDERR "$filename:$lineno: included file '$inc' is not exported\n";
+			$ret = 1;
+		}
+	}
+}
diff --git a/scripts/headers_install.pl b/scripts/headers_install.pl
new file mode 100644
index 000000000000..68591cd08731
--- /dev/null
+++ b/scripts/headers_install.pl
@@ -0,0 +1,45 @@
+#!/usr/bin/perl
+#
+# headers_install prepare the listed header files for use in
+# user space and copy the files to their destination.
+#
+# Usage: headers_install.pl readdir installdir arch [files...]
+# readdir:    dir to open files
+# installdir: dir to install the files
+# arch:       current architecture
+#             arch is used to force a reinstallation when the arch
+#             changes because kbuild then detect a command line change.
+# files:      list of files to check
+#
+# Step in preparation for users space:
+# 1) Drop all use of compiler.h definitions
+# 2) Drop include of compiler.h
+# 3) Drop all sections defined out by __KERNEL__ (using unifdef)
+
+use strict;
+use warnings;
+
+my ($readdir, $installdir, $arch, @files) = @ARGV;
+
+my $unifdef = "scripts/unifdef -U__KERNEL__";
+
+foreach my $file (@files) {
+	my $tmpfile = "$installdir/$file.tmp";
+	open(my $infile, '<', "$readdir/$file")
+		or die "$readdir/$file: $!\n";
+	open(my $outfile, '>', "$tmpfile") or die "$tmpfile: $!\n";
+	while (my $line = <$infile>) {
+		$line =~ s/([\s(])__user\s/$1/g;
+		$line =~ s/([\s(])__force\s/$1/g;
+		$line =~ s/([\s(])__iomem\s/$1/g;
+		$line =~ s/\s__attribute_const__\s/ /g;
+		$line =~ s/\s__attribute_const__$//g;
+		$line =~ s/^#include <linux\/compiler.h>//;
+		printf $outfile "%s", $line;
+	}
+	close $outfile;
+	close $infile;
+	system $unifdef . " $tmpfile > $installdir/$file";
+	unlink $tmpfile;
+}
+exit 0;
diff --git a/scripts/kconfig/conf.c b/scripts/kconfig/conf.c
index fda63136ae68..36b5eedcdc75 100644
--- a/scripts/kconfig/conf.c
+++ b/scripts/kconfig/conf.c
@@ -76,7 +76,6 @@ static void check_stdin(void)
 static int conf_askvalue(struct symbol *sym, const char *def)
 {
 	enum symbol_type type = sym_get_type(sym);
-	tristate val;
 
 	if (!sym_has_value(sym))
 		printf(_("(NEW) "));
@@ -92,15 +91,6 @@ static int conf_askvalue(struct symbol *sym, const char *def)
 	}
 
 	switch (input_mode) {
-	case set_no:
-	case set_mod:
-	case set_yes:
-	case set_random:
-		if (sym_has_value(sym)) {
-			printf("%s\n", def);
-			return 0;
-		}
-		break;
 	case ask_new:
 	case ask_silent:
 		if (sym_has_value(sym)) {
@@ -112,9 +102,6 @@ static int conf_askvalue(struct symbol *sym, const char *def)
 		fflush(stdout);
 		fgets(line, 128, stdin);
 		return 1;
-	case set_default:
-		printf("%s\n", def);
-		return 1;
 	default:
 		break;
 	}
@@ -128,52 +115,6 @@ static int conf_askvalue(struct symbol *sym, const char *def)
 	default:
 		;
 	}
-	switch (input_mode) {
-	case set_yes:
-		if (sym_tristate_within_range(sym, yes)) {
-			line[0] = 'y';
-			line[1] = '\n';
-			line[2] = 0;
-			break;
-		}
-	case set_mod:
-		if (type == S_TRISTATE) {
-			if (sym_tristate_within_range(sym, mod)) {
-				line[0] = 'm';
-				line[1] = '\n';
-				line[2] = 0;
-				break;
-			}
-		} else {
-			if (sym_tristate_within_range(sym, yes)) {
-				line[0] = 'y';
-				line[1] = '\n';
-				line[2] = 0;
-				break;
-			}
-		}
-	case set_no:
-		if (sym_tristate_within_range(sym, no)) {
-			line[0] = 'n';
-			line[1] = '\n';
-			line[2] = 0;
-			break;
-		}
-	case set_random:
-		do {
-			val = (tristate)(rand() % 3);
-		} while (!sym_tristate_within_range(sym, val));
-		switch (val) {
-		case no: line[0] = 'n'; break;
-		case mod: line[0] = 'm'; break;
-		case yes: line[0] = 'y'; break;
-		}
-		line[1] = '\n';
-		line[2] = 0;
-		break;
-	default:
-		break;
-	}
 	printf("%s", line);
 	return 1;
 }
@@ -374,15 +315,7 @@ static int conf_choice(struct menu *menu)
 			else
 				continue;
 			break;
-		case set_random:
-			if (is_new)
-				def = (rand() % cnt) + 1;
-		case set_default:
-		case set_yes:
-		case set_mod:
-		case set_no:
-			cnt = def;
-			printf("%d\n", cnt);
+		default:
 			break;
 		}
 
@@ -494,6 +427,43 @@ static void check_conf(struct menu *menu)
 		check_conf(child);
 }
 
+static void conf_do_update(void)
+{
+	/* Update until a loop caused no more changes */
+	do {
+		conf_cnt = 0;
+		check_conf(&rootmenu);
+	} while (conf_cnt);
+}
+
+static int conf_silent_update(void)
+{
+	const char *name;
+
+	if (conf_get_changed()) {
+		name = getenv("KCONFIG_NOSILENTUPDATE");
+		if (name && *name) {
+			fprintf(stderr,
+			_("\n*** Kernel configuration requires explicit update.\n\n"));
+			return 1;
+		}
+		conf_do_update();
+	}
+	return 0;
+}
+
+static int conf_update(void)
+{
+	rootEntry = &rootmenu;
+	conf(&rootmenu);
+	if (input_mode == ask_all) {
+		input_mode = ask_silent;
+		valid_stdin = 1;
+	}
+	conf_do_update();
+	return 0;
+}
+
 int main(int ac, char **av)
 {
 	int opt;
@@ -599,36 +569,43 @@ int main(int ac, char **av)
 	default:
 		break;
 	}
+	switch (input_mode) {
+	case set_no:
+		conf_set_all_new_symbols(def_no);
+		break;
+	case set_yes:
+		conf_set_all_new_symbols(def_yes);
+		break;
+	case set_mod:
+		conf_set_all_new_symbols(def_mod);
+		break;
+	case set_random:
+		conf_set_all_new_symbols(def_random);
+		break;
+	case set_default:
+		conf_set_all_new_symbols(def_default);
+		break;
+	case ask_silent:
+	case ask_new:
+		if (conf_silent_update())
+			exit(1);
+		break;
+	case ask_all:
+		if (conf_update())
+			exit(1);
+		break;
+	}
 
-	if (input_mode != ask_silent) {
-		rootEntry = &rootmenu;
-		conf(&rootmenu);
-		if (input_mode == ask_all) {
-			input_mode = ask_silent;
-			valid_stdin = 1;
-		}
-	} else if (conf_get_changed()) {
-		name = getenv("KCONFIG_NOSILENTUPDATE");
-		if (name && *name) {
-			fprintf(stderr, _("\n*** Kernel configuration requires explicit update.\n\n"));
-			return 1;
-		}
-	} else
-		goto skip_check;
-
-	do {
-		conf_cnt = 0;
-		check_conf(&rootmenu);
-	} while (conf_cnt);
 	if (conf_write(NULL)) {
 		fprintf(stderr, _("\n*** Error during writing of the kernel configuration.\n\n"));
-		return 1;
+		exit(1);
 	}
-skip_check:
+	/* ask_silent is used during the build so we shall update autoconf.
+	 * All other commands are only used to generate a config.
+	 */
 	if (input_mode == ask_silent && conf_write_autoconf()) {
 		fprintf(stderr, _("\n*** Error during writing of the kernel configuration.\n\n"));
 		return 1;
 	}
-
 	return 0;
 }
diff --git a/scripts/kconfig/confdata.c b/scripts/kconfig/confdata.c
index ee5fe943d58d..df6a188b9930 100644
--- a/scripts/kconfig/confdata.c
+++ b/scripts/kconfig/confdata.c
@@ -222,10 +222,8 @@ load:
 				continue;
 			if (def == S_DEF_USER) {
 				sym = sym_find(line + 9);
-				if (!sym) {
-					conf_warning("trying to assign nonexistent symbol %s", line + 9);
+				if (!sym)
 					break;
-				}
 			} else {
 				sym = sym_lookup(line + 9, 0);
 				if (sym->type == S_UNKNOWN)
@@ -261,10 +259,8 @@ load:
 			}
 			if (def == S_DEF_USER) {
 				sym = sym_find(line + 7);
-				if (!sym) {
-					conf_warning("trying to assign nonexistent symbol %s", line + 7);
+				if (!sym)
 					break;
-				}
 			} else {
 				sym = sym_lookup(line + 7, 0);
 				if (sym->type == S_UNKNOWN)
@@ -812,3 +808,73 @@ void conf_set_changed_callback(void (*fn)(void))
 {
 	conf_changed_callback = fn;
 }
+
+
+void conf_set_all_new_symbols(enum conf_def_mode mode)
+{
+	struct symbol *sym, *csym;
+	struct property *prop;
+	struct expr *e;
+	int i, cnt, def;
+
+	for_all_symbols(i, sym) {
+		if (sym_has_value(sym))
+			continue;
+		switch (sym_get_type(sym)) {
+		case S_BOOLEAN:
+		case S_TRISTATE:
+			switch (mode) {
+			case def_yes:
+				sym->def[S_DEF_USER].tri = yes;
+				break;
+			case def_mod:
+				sym->def[S_DEF_USER].tri = mod;
+				break;
+			case def_no:
+				sym->def[S_DEF_USER].tri = no;
+				break;
+			case def_random:
+				sym->def[S_DEF_USER].tri = (tristate)(rand() % 3);
+				break;
+			default:
+				continue;
+			}
+			if (!sym_is_choice(sym) || mode != def_random)
+				sym->flags |= SYMBOL_DEF_USER;
+			break;
+		default:
+			break;
+		}
+
+	}
+
+	if (modules_sym)
+		sym_calc_value(modules_sym);
+
+	if (mode != def_random)
+		return;
+
+	for_all_symbols(i, csym) {
+		if (sym_has_value(csym) || !sym_is_choice(csym))
+			continue;
+
+		sym_calc_value(csym);
+		prop = sym_get_choice_prop(csym);
+		def = -1;
+		while (1) {
+			cnt = 0;
+			expr_list_for_each_sym(prop->expr, e, sym) {
+				if (sym->visible == no)
+					continue;
+				if (def == cnt++) {
+					csym->def[S_DEF_USER].val = sym;
+					break;
+				}
+			}
+			if (def >= 0 || cnt < 2)
+				break;
+			def = (rand() % cnt) + 1;
+		}
+		csym->flags |= SYMBOL_DEF_USER;
+	}
+}
diff --git a/scripts/kconfig/lex.zconf.c_shipped b/scripts/kconfig/lex.zconf.c_shipped
index 6a61cee4a32c..7342ce0a7780 100644
--- a/scripts/kconfig/lex.zconf.c_shipped
+++ b/scripts/kconfig/lex.zconf.c_shipped
@@ -5,10 +5,29 @@
 
 /* A lexical scanner generated by flex */
 
+#define yy_create_buffer zconf_create_buffer
+#define yy_delete_buffer zconf_delete_buffer
+#define yy_flex_debug zconf_flex_debug
+#define yy_init_buffer zconf_init_buffer
+#define yy_flush_buffer zconf_flush_buffer
+#define yy_load_buffer_state zconf_load_buffer_state
+#define yy_switch_to_buffer zconf_switch_to_buffer
+#define yyin zconfin
+#define yyleng zconfleng
+#define yylex zconflex
+#define yylineno zconflineno
+#define yyout zconfout
+#define yyrestart zconfrestart
+#define yytext zconftext
+#define yywrap zconfwrap
+#define yyalloc zconfalloc
+#define yyrealloc zconfrealloc
+#define yyfree zconffree
+
 #define FLEX_SCANNER
 #define YY_FLEX_MAJOR_VERSION 2
 #define YY_FLEX_MINOR_VERSION 5
-#define YY_FLEX_SUBMINOR_VERSION 33
+#define YY_FLEX_SUBMINOR_VERSION 35
 #if YY_FLEX_SUBMINOR_VERSION > 0
 #define FLEX_BETA
 #endif
@@ -30,7 +49,7 @@
 
 /* C99 systems have <inttypes.h>. Non-C99 systems may or may not. */
 
-#if __STDC_VERSION__ >= 199901L
+#if defined (__STDC_VERSION__) && __STDC_VERSION__ >= 199901L
 
 /* C99 says to define __STDC_LIMIT_MACROS before including stdint.h,
  * if you want the limit (max/min) macros for int types. 
@@ -53,7 +72,6 @@ typedef int flex_int32_t;
 typedef unsigned char flex_uint8_t; 
 typedef unsigned short int flex_uint16_t;
 typedef unsigned int flex_uint32_t;
-#endif /* ! C99 */
 
 /* Limits of integral types. */
 #ifndef INT8_MIN
@@ -84,6 +102,8 @@ typedef unsigned int flex_uint32_t;
 #define UINT32_MAX             (4294967295U)
 #endif
 
+#endif /* ! C99 */
+
 #endif /* ! FLEXINT_H */
 
 #ifdef __cplusplus
@@ -93,11 +113,12 @@ typedef unsigned int flex_uint32_t;
 
 #else	/* ! __cplusplus */
 
-#if __STDC__
+/* C99 requires __STDC__ to be defined as 1. */
+#if defined (__STDC__)
 
 #define YY_USE_CONST
 
-#endif	/* __STDC__ */
+#endif	/* defined (__STDC__) */
 #endif	/* ! __cplusplus */
 
 #ifdef YY_USE_CONST
@@ -177,14 +198,9 @@ extern FILE *zconfin, *zconfout;
 
 #define unput(c) yyunput( c, (yytext_ptr)  )
 
-/* The following is because we cannot portably get our hands on size_t
- * (without autoconf's help, which isn't available because we want
- * flex-generated scanners to compile on their own).
- */
-
 #ifndef YY_TYPEDEF_YY_SIZE_T
 #define YY_TYPEDEF_YY_SIZE_T
-typedef unsigned int yy_size_t;
+typedef size_t yy_size_t;
 #endif
 
 #ifndef YY_STRUCT_YY_BUFFER_STATE
@@ -335,7 +351,7 @@ void zconffree (void *  );
 
 /* Begin user sect3 */
 
-#define zconfwrap() 1
+#define zconfwrap(n) 1
 #define YY_SKIP_YYWRAP
 
 typedef unsigned char YY_CHAR;
@@ -748,6 +764,7 @@ int zconf_flex_debug = 0;
 #define YY_MORE_ADJ 0
 #define YY_RESTORE_YY_MORE_OFFSET
 char *zconftext;
+#define YY_NO_INPUT 1
 
 /*
  * Copyright (C) 2002 Roman Zippel <zippel@linux-m68k.org>
@@ -834,6 +851,35 @@ void alloc_string(const char *str, int size)
 
 static int yy_init_globals (void );
 
+/* Accessor methods to globals.
+   These are made visible to non-reentrant scanners for convenience. */
+
+int zconflex_destroy (void );
+
+int zconfget_debug (void );
+
+void zconfset_debug (int debug_flag  );
+
+YY_EXTRA_TYPE zconfget_extra (void );
+
+void zconfset_extra (YY_EXTRA_TYPE user_defined  );
+
+FILE *zconfget_in (void );
+
+void zconfset_in  (FILE * in_str  );
+
+FILE *zconfget_out (void );
+
+void zconfset_out  (FILE * out_str  );
+
+int zconfget_leng (void );
+
+char *zconfget_text (void );
+
+int zconfget_lineno (void );
+
+void zconfset_lineno (int line_number  );
+
 /* Macros after this point can all be overridden by user definitions in
  * section 1.
  */
@@ -876,7 +922,7 @@ static int input (void );
 /* This used to be an fputs(), but since the string might contain NUL's,
  * we now use fwrite().
  */
-#define ECHO (void) fwrite( zconftext, zconfleng, 1, zconfout )
+#define ECHO fwrite( zconftext, zconfleng, 1, zconfout )
 #endif
 
 /* Gets input and stuffs it into "buf".  number of characters read, or YY_NULL,
@@ -1540,6 +1586,14 @@ static int yy_get_next_buffer (void)
 	else
 		ret_val = EOB_ACT_CONTINUE_SCAN;
 
+	if ((yy_size_t) ((yy_n_chars) + number_to_move) > YY_CURRENT_BUFFER_LVALUE->yy_buf_size) {
+		/* Extend the array by 50%, plus the number we really need. */
+		yy_size_t new_size = (yy_n_chars) + number_to_move + ((yy_n_chars) >> 1);
+		YY_CURRENT_BUFFER_LVALUE->yy_ch_buf = (char *) zconfrealloc((void *) YY_CURRENT_BUFFER_LVALUE->yy_ch_buf,new_size  );
+		if ( ! YY_CURRENT_BUFFER_LVALUE->yy_ch_buf )
+			YY_FATAL_ERROR( "out of dynamic memory in yy_get_next_buffer()" );
+	}
+
 	(yy_n_chars) += number_to_move;
 	YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars)] = YY_END_OF_BUFFER_CHAR;
 	YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars) + 1] = YY_END_OF_BUFFER_CHAR;
@@ -1926,7 +1980,9 @@ static void zconfensure_buffer_stack (void)
 		(yy_buffer_stack) = (struct yy_buffer_state**)zconfalloc
 								(num_to_alloc * sizeof(struct yy_buffer_state*)
 								);
-		
+		if ( ! (yy_buffer_stack) )
+			YY_FATAL_ERROR( "out of dynamic memory in zconfensure_buffer_stack()" );
+								  
 		memset((yy_buffer_stack), 0, num_to_alloc * sizeof(struct yy_buffer_state*));
 				
 		(yy_buffer_stack_max) = num_to_alloc;
@@ -1944,6 +2000,8 @@ static void zconfensure_buffer_stack (void)
 								((yy_buffer_stack),
 								num_to_alloc * sizeof(struct yy_buffer_state*)
 								);
+		if ( ! (yy_buffer_stack) )
+			YY_FATAL_ERROR( "out of dynamic memory in zconfensure_buffer_stack()" );
 
 		/* zero only the new slots.*/
 		memset((yy_buffer_stack) + (yy_buffer_stack_max), 0, grow_size * sizeof(struct yy_buffer_state*));
diff --git a/scripts/kconfig/lkc.h b/scripts/kconfig/lkc.h
index 96521cb087ec..4a9af6f7886b 100644
--- a/scripts/kconfig/lkc.h
+++ b/scripts/kconfig/lkc.h
@@ -42,6 +42,14 @@ extern "C" {
 #define TF_PARAM	0x0002
 #define TF_OPTION	0x0004
 
+enum conf_def_mode {
+	def_default,
+	def_yes,
+	def_mod,
+	def_no,
+	def_random
+};
+
 #define T_OPT_MODULES		1
 #define T_OPT_DEFCONFIG_LIST	2
 #define T_OPT_ENV		3
@@ -69,6 +77,7 @@ const char *conf_get_configname(void);
 char *conf_get_default_confname(void);
 void sym_set_change_count(int count);
 void sym_add_change_count(int count);
+void conf_set_all_new_symbols(enum conf_def_mode mode);
 
 /* kconfig_load.c */
 void kconfig_load(void);
diff --git a/scripts/kconfig/zconf.l b/scripts/kconfig/zconf.l
index 4cea5c85cd0a..5164ef7ce499 100644
--- a/scripts/kconfig/zconf.l
+++ b/scripts/kconfig/zconf.l
@@ -1,5 +1,6 @@
 %option backup nostdinit noyywrap never-interactive full ecs
 %option 8bit backup nodefault perf-report perf-report
+%option noinput
 %x COMMAND HELP STRING PARAM
 %{
 /*
diff --git a/scripts/kernel-doc b/scripts/kernel-doc
index 88e3934a8b8c..ff787e6ff8ed 100755
--- a/scripts/kernel-doc
+++ b/scripts/kernel-doc
@@ -1403,7 +1403,7 @@ sub dump_struct($$) {
 	my $members = $3;
 
 	# ignore embedded structs or unions
-	$members =~ s/{.*?}//g;
+	$members =~ s/{.*}//g;
 
 	# ignore members marked private:
 	$members =~ s/\/\*.*?private:.*?public:.*?\*\///gos;
@@ -1643,6 +1643,7 @@ sub dump_function($$) {
     $prototype =~ s/^__always_inline +//;
     $prototype =~ s/^noinline +//;
     $prototype =~ s/__devinit +//;
+    $prototype =~ s/__init +//;
     $prototype =~ s/^#define\s+//; #ak added
     $prototype =~ s/__attribute__\s*\(\([a-z,]*\)\)//;
 
diff --git a/scripts/mod/file2alias.c b/scripts/mod/file2alias.c
index 4fa1f3ad2513..4c9890ec2528 100644
--- a/scripts/mod/file2alias.c
+++ b/scripts/mod/file2alias.c
@@ -344,14 +344,20 @@ static void do_pnp_device_entry(void *symval, unsigned long size,
 				struct module *mod)
 {
 	const unsigned long id_size = sizeof(struct pnp_device_id);
-	const struct pnp_device_id *id = symval;
+	const unsigned int count = (size / id_size)-1;
+	const struct pnp_device_id *devs = symval;
+	unsigned int i;
 
 	device_id_check(mod->name, "pnp", size, id_size, symval);
 
-	buf_printf(&mod->dev_table_buf,
-		   "MODULE_ALIAS(\"pnp:d%s*\");\n", id->id);
-	buf_printf(&mod->dev_table_buf,
-		   "MODULE_ALIAS(\"acpi*:%s:*\");\n", id->id);
+	for (i = 0; i < count; i++) {
+		const char *id = (char *)devs[i].id;
+
+		buf_printf(&mod->dev_table_buf,
+			   "MODULE_ALIAS(\"pnp:d%s*\");\n", id);
+		buf_printf(&mod->dev_table_buf,
+			   "MODULE_ALIAS(\"acpi*:%s:*\");\n", id);
+	}
 }
 
 /* looks like: "pnp:dD" for every device of the card */
diff --git a/scripts/mod/modpost.c b/scripts/mod/modpost.c
index 8f038e6d5f98..418cd7dbbc93 100644
--- a/scripts/mod/modpost.c
+++ b/scripts/mod/modpost.c
@@ -1468,7 +1468,7 @@ static void section_rel(const char *modname, struct elf_info *elf,
  * marked __initdata will be discarded when the module has been intialized.
  * Likewise for modules used built-in the sections marked __exit
  * are discarded because __exit marked function are supposed to be called
- * only when a moduel is unloaded which never happes for built-in modules.
+ * only when a module is unloaded which never happens for built-in modules.
  * The check_sec_ref() function traverses all relocation records
  * to find all references to a section that reference a section that will
  * be discarded and warns about it.
diff --git a/scripts/patch-kernel b/scripts/patch-kernel
index ece46ef0ba54..46a59cae3a0a 100755
--- a/scripts/patch-kernel
+++ b/scripts/patch-kernel
@@ -213,6 +213,7 @@ fi
 if [ $stopvers != "default" ]; then
 	STOPSUBLEVEL=`echo $stopvers | cut -d. -f3`
 	STOPEXTRA=`echo $stopvers | cut -d. -f4`
+	STOPFULLVERSION=${stopvers%%.$STOPEXTRA}
 	#echo "#___STOPSUBLEVEL=/$STOPSUBLEVEL/, STOPEXTRA=/$STOPEXTRA/"
 else
 	STOPSUBLEVEL=9999
@@ -249,7 +250,7 @@ while :				# incrementing SUBLEVEL (s in v.p.s)
 do
     CURRENTFULLVERSION="$VERSION.$PATCHLEVEL.$SUBLEVEL"
     EXTRAVER=
-    if [ $stopvers = $CURRENTFULLVERSION ]; then
+    if [ $STOPFULLVERSION = $CURRENTFULLVERSION ]; then
         echo "Stopping at $CURRENTFULLVERSION base as requested."
         break
     fi
diff --git a/scripts/setlocalversion b/scripts/setlocalversion
index 1c1bdaf7348a..83b75126c9f7 100755
--- a/scripts/setlocalversion
+++ b/scripts/setlocalversion
@@ -12,7 +12,9 @@ cd "${1:-.}" || usage
 if head=`git rev-parse --verify HEAD 2>/dev/null`; then
 	# Do we have an untagged version?
 	if git name-rev --tags HEAD | grep -E '^HEAD[[:space:]]+(.*~[0-9]*|undefined)$' > /dev/null; then
-	        git describe | awk -F- '{printf("-%05d-%s", $(NF-1),$(NF))}'
+		if tag=`git describe 2>/dev/null`; then
+			echo $tag | awk -F- '{printf("-%05d-%s", $(NF-1),$(NF))}'
+		fi
 	fi
 
 	# Are there uncommitted changes?
diff --git a/scripts/ver_linux b/scripts/ver_linux
index 7ac0e309be09..dbb3037f1346 100755
--- a/scripts/ver_linux
+++ b/scripts/ver_linux
@@ -4,7 +4,6 @@
 # /bin /sbin /usr/bin /usr/sbin /usr/local/bin, but it may
 # differ on your system.
 #
-PATH=/sbin:/usr/sbin:/bin:/usr/bin:/usr/local/sbin:$PATH
 echo 'If some fields are empty or look unusual you may have an old version.'
 echo 'Compare to the current minimal requirements in Documentation/Changes.'
 echo ' '
diff --git a/security/capability.c b/security/capability.c
index 5b01c0b02422..245874819036 100644
--- a/security/capability.c
+++ b/security/capability.c
@@ -211,8 +211,7 @@ static int cap_inode_follow_link(struct dentry *dentry,
 	return 0;
 }
 
-static int cap_inode_permission(struct inode *inode, int mask,
-				struct nameidata *nd)
+static int cap_inode_permission(struct inode *inode, int mask)
 {
 	return 0;
 }
@@ -812,7 +811,8 @@ struct security_operations default_security_ops = {
 
 void security_fixup_ops(struct security_operations *ops)
 {
-	set_to_cap_if_null(ops, ptrace);
+	set_to_cap_if_null(ops, ptrace_may_access);
+	set_to_cap_if_null(ops, ptrace_traceme);
 	set_to_cap_if_null(ops, capget);
 	set_to_cap_if_null(ops, capset_check);
 	set_to_cap_if_null(ops, capset_set);
diff --git a/security/commoncap.c b/security/commoncap.c
index 4afbece37a08..e4c4b3fc0c04 100644
--- a/security/commoncap.c
+++ b/security/commoncap.c
@@ -63,14 +63,24 @@ int cap_settime(struct timespec *ts, struct timezone *tz)
 	return 0;
 }
 
-int cap_ptrace (struct task_struct *parent, struct task_struct *child,
-		unsigned int mode)
+int cap_ptrace_may_access(struct task_struct *child, unsigned int mode)
 {
 	/* Derived from arch/i386/kernel/ptrace.c:sys_ptrace. */
-	if (!cap_issubset(child->cap_permitted, parent->cap_permitted) &&
-	    !__capable(parent, CAP_SYS_PTRACE))
-		return -EPERM;
-	return 0;
+	if (cap_issubset(child->cap_permitted, current->cap_permitted))
+		return 0;
+	if (capable(CAP_SYS_PTRACE))
+		return 0;
+	return -EPERM;
+}
+
+int cap_ptrace_traceme(struct task_struct *parent)
+{
+	/* Derived from arch/i386/kernel/ptrace.c:sys_ptrace. */
+	if (cap_issubset(current->cap_permitted, parent->cap_permitted))
+		return 0;
+	if (has_capability(parent, CAP_SYS_PTRACE))
+		return 0;
+	return -EPERM;
 }
 
 int cap_capget (struct task_struct *target, kernel_cap_t *effective,
@@ -534,7 +544,7 @@ int cap_task_post_setuid (uid_t old_ruid, uid_t old_euid, uid_t old_suid,
 static inline int cap_safe_nice(struct task_struct *p)
 {
 	if (!cap_issubset(p->cap_permitted, current->cap_permitted) &&
-	    !__capable(current, CAP_SYS_NICE))
+	    !capable(CAP_SYS_NICE))
 		return -EPERM;
 	return 0;
 }
diff --git a/security/device_cgroup.c b/security/device_cgroup.c
index ddd92cec78ed..46f23971f7e4 100644
--- a/security/device_cgroup.c
+++ b/security/device_cgroup.c
@@ -41,6 +41,7 @@ struct dev_whitelist_item {
 	short type;
 	short access;
 	struct list_head list;
+	struct rcu_head rcu;
 };
 
 struct dev_cgroup {
@@ -59,6 +60,11 @@ static inline struct dev_cgroup *cgroup_to_devcgroup(struct cgroup *cgroup)
 	return css_to_devcgroup(cgroup_subsys_state(cgroup, devices_subsys_id));
 }
 
+static inline struct dev_cgroup *task_devcgroup(struct task_struct *task)
+{
+	return css_to_devcgroup(task_subsys_state(task, devices_subsys_id));
+}
+
 struct cgroup_subsys devices_subsys;
 
 static int devcgroup_can_attach(struct cgroup_subsys *ss,
@@ -128,11 +134,19 @@ static int dev_whitelist_add(struct dev_cgroup *dev_cgroup,
 	}
 
 	if (whcopy != NULL)
-		list_add_tail(&whcopy->list, &dev_cgroup->whitelist);
+		list_add_tail_rcu(&whcopy->list, &dev_cgroup->whitelist);
 	spin_unlock(&dev_cgroup->lock);
 	return 0;
 }
 
+static void whitelist_item_free(struct rcu_head *rcu)
+{
+	struct dev_whitelist_item *item;
+
+	item = container_of(rcu, struct dev_whitelist_item, rcu);
+	kfree(item);
+}
+
 /*
  * called under cgroup_lock()
  * since the list is visible to other tasks, we need the spinlock also
@@ -156,8 +170,8 @@ static void dev_whitelist_rm(struct dev_cgroup *dev_cgroup,
 remove:
 		walk->access &= ~wh->access;
 		if (!walk->access) {
-			list_del(&walk->list);
-			kfree(walk);
+			list_del_rcu(&walk->list);
+			call_rcu(&walk->rcu, whitelist_item_free);
 		}
 	}
 	spin_unlock(&dev_cgroup->lock);
@@ -188,7 +202,7 @@ static struct cgroup_subsys_state *devcgroup_create(struct cgroup_subsys *ss,
 		}
 		wh->minor = wh->major = ~0;
 		wh->type = DEV_ALL;
-		wh->access = ACC_MKNOD | ACC_READ | ACC_WRITE;
+		wh->access = ACC_MASK;
 		list_add(&wh->list, &dev_cgroup->whitelist);
 	} else {
 		parent_dev_cgroup = cgroup_to_devcgroup(parent_cgroup);
@@ -250,11 +264,10 @@ static char type_to_char(short type)
 
 static void set_majmin(char *str, unsigned m)
 {
-	memset(str, 0, MAJMINLEN);
 	if (m == ~0)
-		sprintf(str, "*");
+		strcpy(str, "*");
 	else
-		snprintf(str, MAJMINLEN, "%u", m);
+		sprintf(str, "%u", m);
 }
 
 static int devcgroup_seq_read(struct cgroup *cgroup, struct cftype *cft,
@@ -264,15 +277,15 @@ static int devcgroup_seq_read(struct cgroup *cgroup, struct cftype *cft,
 	struct dev_whitelist_item *wh;
 	char maj[MAJMINLEN], min[MAJMINLEN], acc[ACCLEN];
 
-	spin_lock(&devcgroup->lock);
-	list_for_each_entry(wh, &devcgroup->whitelist, list) {
+	rcu_read_lock();
+	list_for_each_entry_rcu(wh, &devcgroup->whitelist, list) {
 		set_access(acc, wh->access);
 		set_majmin(maj, wh->major);
 		set_majmin(min, wh->minor);
 		seq_printf(m, "%c %s:%s %s\n", type_to_char(wh->type),
 			   maj, min, acc);
 	}
-	spin_unlock(&devcgroup->lock);
+	rcu_read_unlock();
 
 	return 0;
 }
@@ -312,10 +325,10 @@ static int may_access_whitelist(struct dev_cgroup *c,
  * when adding a new allow rule to a device whitelist, the rule
  * must be allowed in the parent device
  */
-static int parent_has_perm(struct cgroup *childcg,
+static int parent_has_perm(struct dev_cgroup *childcg,
 				  struct dev_whitelist_item *wh)
 {
-	struct cgroup *pcg = childcg->parent;
+	struct cgroup *pcg = childcg->css.cgroup->parent;
 	struct dev_cgroup *parent;
 	int ret;
 
@@ -341,39 +354,19 @@ static int parent_has_perm(struct cgroup *childcg,
  * new access is only allowed if you're in the top-level cgroup, or your
  * parent cgroup has the access you're asking for.
  */
-static ssize_t devcgroup_access_write(struct cgroup *cgroup, struct cftype *cft,
-				struct file *file, const char __user *userbuf,
-				size_t nbytes, loff_t *ppos)
+static int devcgroup_update_access(struct dev_cgroup *devcgroup,
+				   int filetype, const char *buffer)
 {
-	struct cgroup *cur_cgroup;
-	struct dev_cgroup *devcgroup, *cur_devcgroup;
-	int filetype = cft->private;
-	char *buffer, *b;
+	struct dev_cgroup *cur_devcgroup;
+	const char *b;
+	char *endp;
 	int retval = 0, count;
 	struct dev_whitelist_item wh;
 
 	if (!capable(CAP_SYS_ADMIN))
 		return -EPERM;
 
-	devcgroup = cgroup_to_devcgroup(cgroup);
-	cur_cgroup = task_cgroup(current, devices_subsys.subsys_id);
-	cur_devcgroup = cgroup_to_devcgroup(cur_cgroup);
-
-	buffer = kmalloc(nbytes+1, GFP_KERNEL);
-	if (!buffer)
-		return -ENOMEM;
-
-	if (copy_from_user(buffer, userbuf, nbytes)) {
-		retval = -EFAULT;
-		goto out1;
-	}
-	buffer[nbytes] = 0;	/* nul-terminate */
-
-	cgroup_lock();
-	if (cgroup_is_removed(cgroup)) {
-		retval = -ENODEV;
-		goto out2;
-	}
+	cur_devcgroup = task_devcgroup(current);
 
 	memset(&wh, 0, sizeof(wh));
 	b = buffer;
@@ -392,32 +385,23 @@ static ssize_t devcgroup_access_write(struct cgroup *cgroup, struct cftype *cft,
 		wh.type = DEV_CHAR;
 		break;
 	default:
-		retval = -EINVAL;
-		goto out2;
+		return -EINVAL;
 	}
 	b++;
-	if (!isspace(*b)) {
-		retval = -EINVAL;
-		goto out2;
-	}
+	if (!isspace(*b))
+		return -EINVAL;
 	b++;
 	if (*b == '*') {
 		wh.major = ~0;
 		b++;
 	} else if (isdigit(*b)) {
-		wh.major = 0;
-		while (isdigit(*b)) {
-			wh.major = wh.major*10+(*b-'0');
-			b++;
-		}
+		wh.major = simple_strtoul(b, &endp, 10);
+		b = endp;
 	} else {
-		retval = -EINVAL;
-		goto out2;
-	}
-	if (*b != ':') {
-		retval = -EINVAL;
-		goto out2;
+		return -EINVAL;
 	}
+	if (*b != ':')
+		return -EINVAL;
 	b++;
 
 	/* read minor */
@@ -425,19 +409,13 @@ static ssize_t devcgroup_access_write(struct cgroup *cgroup, struct cftype *cft,
 		wh.minor = ~0;
 		b++;
 	} else if (isdigit(*b)) {
-		wh.minor = 0;
-		while (isdigit(*b)) {
-			wh.minor = wh.minor*10+(*b-'0');
-			b++;
-		}
+		wh.minor = simple_strtoul(b, &endp, 10);
+		b = endp;
 	} else {
-		retval = -EINVAL;
-		goto out2;
-	}
-	if (!isspace(*b)) {
-		retval = -EINVAL;
-		goto out2;
+		return -EINVAL;
 	}
+	if (!isspace(*b))
+		return -EINVAL;
 	for (b++, count = 0; count < 3; count++, b++) {
 		switch (*b) {
 		case 'r':
@@ -454,8 +432,7 @@ static ssize_t devcgroup_access_write(struct cgroup *cgroup, struct cftype *cft,
 			count = 3;
 			break;
 		default:
-			retval = -EINVAL;
-			goto out2;
+			return -EINVAL;
 		}
 	}
 
@@ -463,38 +440,39 @@ handle:
 	retval = 0;
 	switch (filetype) {
 	case DEVCG_ALLOW:
-		if (!parent_has_perm(cgroup, &wh))
-			retval = -EPERM;
-		else
-			retval = dev_whitelist_add(devcgroup, &wh);
-		break;
+		if (!parent_has_perm(devcgroup, &wh))
+			return -EPERM;
+		return dev_whitelist_add(devcgroup, &wh);
 	case DEVCG_DENY:
 		dev_whitelist_rm(devcgroup, &wh);
 		break;
 	default:
-		retval = -EINVAL;
-		goto out2;
+		return -EINVAL;
 	}
+	return 0;
+}
 
-	if (retval == 0)
-		retval = nbytes;
-
-out2:
+static int devcgroup_access_write(struct cgroup *cgrp, struct cftype *cft,
+				  const char *buffer)
+{
+	int retval;
+	if (!cgroup_lock_live_group(cgrp))
+		return -ENODEV;
+	retval = devcgroup_update_access(cgroup_to_devcgroup(cgrp),
+					 cft->private, buffer);
 	cgroup_unlock();
-out1:
-	kfree(buffer);
 	return retval;
 }
 
 static struct cftype dev_cgroup_files[] = {
 	{
 		.name = "allow",
-		.write  = devcgroup_access_write,
+		.write_string  = devcgroup_access_write,
 		.private = DEVCG_ALLOW,
 	},
 	{
 		.name = "deny",
-		.write = devcgroup_access_write,
+		.write_string = devcgroup_access_write,
 		.private = DEVCG_DENY,
 	},
 	{
@@ -530,13 +508,12 @@ int devcgroup_inode_permission(struct inode *inode, int mask)
 		return 0;
 	if (!S_ISBLK(inode->i_mode) && !S_ISCHR(inode->i_mode))
 		return 0;
-	dev_cgroup = css_to_devcgroup(task_subsys_state(current,
-				devices_subsys_id));
-	if (!dev_cgroup)
-		return 0;
 
-	spin_lock(&dev_cgroup->lock);
-	list_for_each_entry(wh, &dev_cgroup->whitelist, list) {
+	rcu_read_lock();
+
+	dev_cgroup = task_devcgroup(current);
+
+	list_for_each_entry_rcu(wh, &dev_cgroup->whitelist, list) {
 		if (wh->type & DEV_ALL)
 			goto acc_check;
 		if ((wh->type & DEV_BLOCK) && !S_ISBLK(inode->i_mode))
@@ -552,10 +529,11 @@ acc_check:
 			continue;
 		if ((mask & MAY_READ) && !(wh->access & ACC_READ))
 			continue;
-		spin_unlock(&dev_cgroup->lock);
+		rcu_read_unlock();
 		return 0;
 	}
-	spin_unlock(&dev_cgroup->lock);
+
+	rcu_read_unlock();
 
 	return -EPERM;
 }
@@ -565,12 +543,10 @@ int devcgroup_inode_mknod(int mode, dev_t dev)
 	struct dev_cgroup *dev_cgroup;
 	struct dev_whitelist_item *wh;
 
-	dev_cgroup = css_to_devcgroup(task_subsys_state(current,
-				devices_subsys_id));
-	if (!dev_cgroup)
-		return 0;
+	rcu_read_lock();
+
+	dev_cgroup = task_devcgroup(current);
 
-	spin_lock(&dev_cgroup->lock);
 	list_for_each_entry(wh, &dev_cgroup->whitelist, list) {
 		if (wh->type & DEV_ALL)
 			goto acc_check;
@@ -585,9 +561,11 @@ int devcgroup_inode_mknod(int mode, dev_t dev)
 acc_check:
 		if (!(wh->access & ACC_MKNOD))
 			continue;
-		spin_unlock(&dev_cgroup->lock);
+		rcu_read_unlock();
 		return 0;
 	}
-	spin_unlock(&dev_cgroup->lock);
+
+	rcu_read_unlock();
+
 	return -EPERM;
 }
diff --git a/security/root_plug.c b/security/root_plug.c
index be0ebec2580b..c3f68b5b372d 100644
--- a/security/root_plug.c
+++ b/security/root_plug.c
@@ -72,7 +72,8 @@ static int rootplug_bprm_check_security (struct linux_binprm *bprm)
 
 static struct security_operations rootplug_security_ops = {
 	/* Use the capability functions for some of the hooks */
-	.ptrace =			cap_ptrace,
+	.ptrace_may_access =		cap_ptrace_may_access,
+	.ptrace_traceme =		cap_ptrace_traceme,
 	.capget =			cap_capget,
 	.capset_check =			cap_capset_check,
 	.capset_set =			cap_capset_set,
diff --git a/security/security.c b/security/security.c
index 59f23b5918b3..3a4b4f55b33f 100644
--- a/security/security.c
+++ b/security/security.c
@@ -127,10 +127,14 @@ int register_security(struct security_operations *ops)
 
 /* Security operations */
 
-int security_ptrace(struct task_struct *parent, struct task_struct *child,
-		    unsigned int mode)
+int security_ptrace_may_access(struct task_struct *child, unsigned int mode)
 {
-	return security_ops->ptrace(parent, child, mode);
+	return security_ops->ptrace_may_access(child, mode);
+}
+
+int security_ptrace_traceme(struct task_struct *parent)
+{
+	return security_ops->ptrace_traceme(parent);
 }
 
 int security_capget(struct task_struct *target,
@@ -429,11 +433,11 @@ int security_inode_follow_link(struct dentry *dentry, struct nameidata *nd)
 	return security_ops->inode_follow_link(dentry, nd);
 }
 
-int security_inode_permission(struct inode *inode, int mask, struct nameidata *nd)
+int security_inode_permission(struct inode *inode, int mask)
 {
 	if (unlikely(IS_PRIVATE(inode)))
 		return 0;
-	return security_ops->inode_permission(inode, mask, nd);
+	return security_ops->inode_permission(inode, mask);
 }
 
 int security_inode_setattr(struct dentry *dentry, struct iattr *attr)
@@ -442,6 +446,7 @@ int security_inode_setattr(struct dentry *dentry, struct iattr *attr)
 		return 0;
 	return security_ops->inode_setattr(dentry, attr);
 }
+EXPORT_SYMBOL_GPL(security_inode_setattr);
 
 int security_inode_getattr(struct vfsmount *mnt, struct dentry *dentry)
 {
diff --git a/security/selinux/hooks.c b/security/selinux/hooks.c
index 63f131fc42e4..03fc6a81ae32 100644
--- a/security/selinux/hooks.c
+++ b/security/selinux/hooks.c
@@ -25,7 +25,7 @@
 
 #include <linux/init.h>
 #include <linux/kernel.h>
-#include <linux/ptrace.h>
+#include <linux/tracehook.h>
 #include <linux/errno.h>
 #include <linux/sched.h>
 #include <linux/security.h>
@@ -998,8 +998,12 @@ static int selinux_sb_show_options(struct seq_file *m, struct super_block *sb)
 	int rc;
 
 	rc = selinux_get_mnt_opts(sb, &opts);
-	if (rc)
+	if (rc) {
+		/* before policy load we may get EINVAL, don't show anything */
+		if (rc == -EINVAL)
+			rc = 0;
 		return rc;
+	}
 
 	selinux_write_opts(m, &opts);
 
@@ -1734,24 +1738,34 @@ static inline u32 file_to_av(struct file *file)
 
 /* Hook functions begin here. */
 
-static int selinux_ptrace(struct task_struct *parent,
-			  struct task_struct *child,
-			  unsigned int mode)
+static int selinux_ptrace_may_access(struct task_struct *child,
+				     unsigned int mode)
 {
 	int rc;
 
-	rc = secondary_ops->ptrace(parent, child, mode);
+	rc = secondary_ops->ptrace_may_access(child, mode);
 	if (rc)
 		return rc;
 
 	if (mode == PTRACE_MODE_READ) {
-		struct task_security_struct *tsec = parent->security;
+		struct task_security_struct *tsec = current->security;
 		struct task_security_struct *csec = child->security;
 		return avc_has_perm(tsec->sid, csec->sid,
 				    SECCLASS_FILE, FILE__READ, NULL);
 	}
 
-	return task_has_perm(parent, child, PROCESS__PTRACE);
+	return task_has_perm(current, child, PROCESS__PTRACE);
+}
+
+static int selinux_ptrace_traceme(struct task_struct *parent)
+{
+	int rc;
+
+	rc = secondary_ops->ptrace_traceme(parent);
+	if (rc)
+		return rc;
+
+	return task_has_perm(parent, current, PROCESS__PTRACE);
 }
 
 static int selinux_capget(struct task_struct *target, kernel_cap_t *effective,
@@ -1971,22 +1985,6 @@ static int selinux_vm_enough_memory(struct mm_struct *mm, long pages)
 	return __vm_enough_memory(mm, pages, cap_sys_admin);
 }
 
-/**
- * task_tracer_task - return the task that is tracing the given task
- * @task:		task to consider
- *
- * Returns NULL if noone is tracing @task, or the &struct task_struct
- * pointer to its tracer.
- *
- * Must be called under rcu_read_lock().
- */
-static struct task_struct *task_tracer_task(struct task_struct *task)
-{
-	if (task->ptrace & PT_PTRACED)
-		return rcu_dereference(task->parent);
-	return NULL;
-}
-
 /* binprm security operations */
 
 static int selinux_bprm_alloc_security(struct linux_binprm *bprm)
@@ -2238,7 +2236,7 @@ static void selinux_bprm_apply_creds(struct linux_binprm *bprm, int unsafe)
 			u32 ptsid = 0;
 
 			rcu_read_lock();
-			tracer = task_tracer_task(current);
+			tracer = tracehook_tracer_task(current);
 			if (likely(tracer != NULL)) {
 				sec = tracer->security;
 				ptsid = sec->sid;
@@ -2640,12 +2638,11 @@ static int selinux_inode_follow_link(struct dentry *dentry, struct nameidata *na
 	return dentry_has_perm(current, NULL, dentry, FILE__READ);
 }
 
-static int selinux_inode_permission(struct inode *inode, int mask,
-				    struct nameidata *nd)
+static int selinux_inode_permission(struct inode *inode, int mask)
 {
 	int rc;
 
-	rc = secondary_ops->inode_permission(inode, mask, nd);
+	rc = secondary_ops->inode_permission(inode, mask);
 	if (rc)
 		return rc;
 
@@ -5247,7 +5244,7 @@ static int selinux_setprocattr(struct task_struct *p,
 		   Otherwise, leave SID unchanged and fail. */
 		task_lock(p);
 		rcu_read_lock();
-		tracer = task_tracer_task(p);
+		tracer = tracehook_tracer_task(p);
 		if (tracer != NULL) {
 			struct task_security_struct *ptsec = tracer->security;
 			u32 ptsid = ptsec->sid;
@@ -5359,7 +5356,8 @@ static int selinux_key_getsecurity(struct key *key, char **_buffer)
 static struct security_operations selinux_ops = {
 	.name =				"selinux",
 
-	.ptrace =			selinux_ptrace,
+	.ptrace_may_access =		selinux_ptrace_may_access,
+	.ptrace_traceme =		selinux_ptrace_traceme,
 	.capget =			selinux_capget,
 	.capset_check =			selinux_capset_check,
 	.capset_set =			selinux_capset_set,
@@ -5670,27 +5668,20 @@ static struct nf_hook_ops selinux_ipv6_ops[] = {
 static int __init selinux_nf_ip_init(void)
 {
 	int err = 0;
-	u32 iter;
 
 	if (!selinux_enabled)
 		goto out;
 
 	printk(KERN_DEBUG "SELinux:  Registering netfilter hooks\n");
 
-	for (iter = 0; iter < ARRAY_SIZE(selinux_ipv4_ops); iter++) {
-		err = nf_register_hook(&selinux_ipv4_ops[iter]);
-		if (err)
-			panic("SELinux: nf_register_hook for IPv4: error %d\n",
-			      err);
-	}
+	err = nf_register_hooks(selinux_ipv4_ops, ARRAY_SIZE(selinux_ipv4_ops));
+	if (err)
+		panic("SELinux: nf_register_hooks for IPv4: error %d\n", err);
 
 #if defined(CONFIG_IPV6) || defined(CONFIG_IPV6_MODULE)
-	for (iter = 0; iter < ARRAY_SIZE(selinux_ipv6_ops); iter++) {
-		err = nf_register_hook(&selinux_ipv6_ops[iter]);
-		if (err)
-			panic("SELinux: nf_register_hook for IPv6: error %d\n",
-			      err);
-	}
+	err = nf_register_hooks(selinux_ipv6_ops, ARRAY_SIZE(selinux_ipv6_ops));
+	if (err)
+		panic("SELinux: nf_register_hooks for IPv6: error %d\n", err);
 #endif	/* IPV6 */
 
 out:
@@ -5702,15 +5693,11 @@ __initcall(selinux_nf_ip_init);
 #ifdef CONFIG_SECURITY_SELINUX_DISABLE
 static void selinux_nf_ip_exit(void)
 {
-	u32 iter;
-
 	printk(KERN_DEBUG "SELinux:  Unregistering netfilter hooks\n");
 
-	for (iter = 0; iter < ARRAY_SIZE(selinux_ipv4_ops); iter++)
-		nf_unregister_hook(&selinux_ipv4_ops[iter]);
+	nf_unregister_hooks(selinux_ipv4_ops, ARRAY_SIZE(selinux_ipv4_ops));
 #if defined(CONFIG_IPV6) || defined(CONFIG_IPV6_MODULE)
-	for (iter = 0; iter < ARRAY_SIZE(selinux_ipv6_ops); iter++)
-		nf_unregister_hook(&selinux_ipv6_ops[iter]);
+	nf_unregister_hooks(selinux_ipv6_ops, ARRAY_SIZE(selinux_ipv6_ops));
 #endif	/* IPV6 */
 }
 #endif
diff --git a/security/selinux/ss/services.c b/security/selinux/ss/services.c
index b52f923ce680..d11a8154500f 100644
--- a/security/selinux/ss/services.c
+++ b/security/selinux/ss/services.c
@@ -811,11 +811,12 @@ static int string_to_context_struct(struct policydb *pol,
 	/* Check the validity of the new context. */
 	if (!policydb_context_isvalid(pol, ctx)) {
 		rc = -EINVAL;
-		context_destroy(ctx);
 		goto out;
 	}
 	rc = 0;
 out:
+	if (rc)
+		context_destroy(ctx);
 	return rc;
 }
 
@@ -868,8 +869,7 @@ static int security_context_to_sid_core(const char *scontext, u32 scontext_len,
 	} else if (rc)
 		goto out;
 	rc = sidtab_context_to_sid(&sidtab, &context, sid);
-	if (rc)
-		context_destroy(&context);
+	context_destroy(&context);
 out:
 	read_unlock(&policy_rwlock);
 	kfree(scontext2);
diff --git a/security/smack/smack_lsm.c b/security/smack/smack_lsm.c
index ee5a51cbc5eb..87d75417ea93 100644
--- a/security/smack/smack_lsm.c
+++ b/security/smack/smack_lsm.c
@@ -87,27 +87,46 @@ struct inode_smack *new_inode_smack(char *smack)
  */
 
 /**
- * smack_ptrace - Smack approval on ptrace
- * @ptp: parent task pointer
+ * smack_ptrace_may_access - Smack approval on PTRACE_ATTACH
  * @ctp: child task pointer
  *
  * Returns 0 if access is OK, an error code otherwise
  *
  * Do the capability checks, and require read and write.
  */
-static int smack_ptrace(struct task_struct *ptp, struct task_struct *ctp,
-			unsigned int mode)
+static int smack_ptrace_may_access(struct task_struct *ctp, unsigned int mode)
 {
 	int rc;
 
-	rc = cap_ptrace(ptp, ctp, mode);
+	rc = cap_ptrace_may_access(ctp, mode);
 	if (rc != 0)
 		return rc;
 
-	rc = smk_access(ptp->security, ctp->security, MAY_READWRITE);
-	if (rc != 0 && __capable(ptp, CAP_MAC_OVERRIDE))
+	rc = smk_access(current->security, ctp->security, MAY_READWRITE);
+	if (rc != 0 && capable(CAP_MAC_OVERRIDE))
 		return 0;
+	return rc;
+}
+
+/**
+ * smack_ptrace_traceme - Smack approval on PTRACE_TRACEME
+ * @ptp: parent task pointer
+ *
+ * Returns 0 if access is OK, an error code otherwise
+ *
+ * Do the capability checks, and require read and write.
+ */
+static int smack_ptrace_traceme(struct task_struct *ptp)
+{
+	int rc;
+
+	rc = cap_ptrace_traceme(ptp);
+	if (rc != 0)
+		return rc;
 
+	rc = smk_access(ptp->security, current->security, MAY_READWRITE);
+	if (rc != 0 && has_capability(ptp, CAP_MAC_OVERRIDE))
+		return 0;
 	return rc;
 }
 
@@ -522,8 +541,7 @@ static int smack_inode_rename(struct inode *old_inode,
  *
  * Returns 0 if access is permitted, -EACCES otherwise
  */
-static int smack_inode_permission(struct inode *inode, int mask,
-				  struct nameidata *nd)
+static int smack_inode_permission(struct inode *inode, int mask)
 {
 	/*
 	 * No permission to check. Existence test. Yup, it's there.
@@ -924,7 +942,7 @@ static int smack_file_send_sigiotask(struct task_struct *tsk,
 	 */
 	file = container_of(fown, struct file, f_owner);
 	rc = smk_access(file->f_security, tsk->security, MAY_WRITE);
-	if (rc != 0 && __capable(tsk, CAP_MAC_OVERRIDE))
+	if (rc != 0 && has_capability(tsk, CAP_MAC_OVERRIDE))
 		return 0;
 	return rc;
 }
@@ -1165,12 +1183,12 @@ static int smack_task_wait(struct task_struct *p)
 	 * account for the smack labels having gotten to
 	 * be different in the first place.
 	 *
-	 * This breaks the strict subjet/object access
+	 * This breaks the strict subject/object access
 	 * control ideal, taking the object's privilege
 	 * state into account in the decision as well as
 	 * the smack value.
 	 */
-	if (capable(CAP_MAC_OVERRIDE) || __capable(p, CAP_MAC_OVERRIDE))
+	if (capable(CAP_MAC_OVERRIDE) || has_capability(p, CAP_MAC_OVERRIDE))
 		return 0;
 
 	return rc;
@@ -2017,9 +2035,6 @@ static int smack_setprocattr(struct task_struct *p, char *name,
 {
 	char *newsmack;
 
-	if (!__capable(p, CAP_MAC_ADMIN))
-		return -EPERM;
-
 	/*
 	 * Changing another process' Smack value is too dangerous
 	 * and supports no sane use case.
@@ -2027,6 +2042,9 @@ static int smack_setprocattr(struct task_struct *p, char *name,
 	if (p != current)
 		return -EPERM;
 
+	if (!capable(CAP_MAC_ADMIN))
+		return -EPERM;
+
 	if (value == NULL || size == 0 || size >= SMK_LABELLEN)
 		return -EINVAL;
 
@@ -2553,7 +2571,8 @@ static void smack_release_secctx(char *secdata, u32 seclen)
 struct security_operations smack_ops = {
 	.name =				"smack",
 
-	.ptrace = 			smack_ptrace,
+	.ptrace_may_access =		smack_ptrace_may_access,
+	.ptrace_traceme =		smack_ptrace_traceme,
 	.capget = 			cap_capget,
 	.capset_check = 		cap_capset_check,
 	.capset_set = 			cap_capset_set,
@@ -2730,4 +2749,3 @@ static __init int smack_init(void)
  * all processes and objects when they are created.
  */
 security_initcall(smack_init);
-
diff --git a/sound/arm/pxa2xx-ac97.c b/sound/arm/pxa2xx-ac97.c
index 5b3274b465eb..199cca3366df 100644
--- a/sound/arm/pxa2xx-ac97.c
+++ b/sound/arm/pxa2xx-ac97.c
@@ -26,10 +26,10 @@
 
 #include <asm/irq.h>
 #include <linux/mutex.h>
-#include <asm/hardware.h>
-#include <asm/arch/pxa-regs.h>
-#include <asm/arch/pxa2xx-gpio.h>
-#include <asm/arch/audio.h>
+#include <mach/hardware.h>
+#include <mach/pxa-regs.h>
+#include <mach/pxa2xx-gpio.h>
+#include <mach/audio.h>
 
 #include "pxa2xx-pcm.h"
 
diff --git a/sound/arm/pxa2xx-pcm.c b/sound/arm/pxa2xx-pcm.c
index 0ede9e4656a8..381094aab235 100644
--- a/sound/arm/pxa2xx-pcm.c
+++ b/sound/arm/pxa2xx-pcm.c
@@ -21,8 +21,8 @@
 #include <sound/pcm_params.h>
 
 #include <asm/dma.h>
-#include <asm/hardware.h>
-#include <asm/arch/pxa-regs.h>
+#include <mach/hardware.h>
+#include <mach/pxa-regs.h>
 
 #include "pxa2xx-pcm.h"
 
diff --git a/sound/arm/sa11xx-uda1341.c b/sound/arm/sa11xx-uda1341.c
index faeddf3ecedb..b9c51bf8cd71 100644
--- a/sound/arm/sa11xx-uda1341.c
+++ b/sound/arm/sa11xx-uda1341.c
@@ -71,8 +71,8 @@
 #include <linux/pm.h>
 #endif
 
-#include <asm/hardware.h>
-#include <asm/arch/h3600.h>
+#include <mach/hardware.h>
+#include <mach/h3600.h>
 #include <asm/mach-types.h>
 #include <asm/dma.h>
 
diff --git a/sound/core/seq/oss/seq_oss_synth.c b/sound/core/seq/oss/seq_oss_synth.c
index 558dadbf45f1..e024e4588b82 100644
--- a/sound/core/seq/oss/seq_oss_synth.c
+++ b/sound/core/seq/oss/seq_oss_synth.c
@@ -604,6 +604,9 @@ snd_seq_oss_synth_make_info(struct seq_oss_devinfo *dp, int dev, struct synth_in
 {
 	struct seq_oss_synth *rec;
 
+	if (dev < 0 || dev >= dp->max_synthdev)
+		return -ENXIO;
+
 	if (dp->synths[dev].is_midi) {
 		struct midi_info minf;
 		snd_seq_oss_midi_make_info(dp, dp->synths[dev].midi_mapped, &minf);
diff --git a/sound/i2c/other/tea575x-tuner.c b/sound/i2c/other/tea575x-tuner.c
index 87e3aefeddc3..83e90057270e 100644
--- a/sound/i2c/other/tea575x-tuner.c
+++ b/sound/i2c/other/tea575x-tuner.c
@@ -189,9 +189,7 @@ void snd_tea575x_init(struct snd_tea575x *tea)
 	}
 
 	memset(&tea->vd, 0, sizeof(tea->vd));
-	tea->vd.owner = tea->card->module;
 	strcpy(tea->vd.name, tea->tea5759 ? "TEA5759 radio" : "TEA5757 radio");
-	tea->vd.type = VID_TYPE_TUNER;
 	tea->vd.release = snd_tea575x_release;
 	video_set_drvdata(&tea->vd, tea);
 	tea->vd.fops = &tea->fops;
diff --git a/sound/isa/cs423x/cs4236.c b/sound/isa/cs423x/cs4236.c
index dbe63db4bfd6..4d4b8ddc26ba 100644
--- a/sound/isa/cs423x/cs4236.c
+++ b/sound/isa/cs423x/cs4236.c
@@ -325,6 +325,7 @@ static int __devinit snd_cs423x_pnp_init_mpu(int dev, struct pnp_dev *pdev)
 static int __devinit snd_card_cs4232_pnp(int dev, struct snd_card_cs4236 *acard,
 					 struct pnp_dev *pdev)
 {
+	acard->wss = pdev;
 	if (snd_cs423x_pnp_init_wss(dev, acard->wss) < 0)
 		return -EBUSY;
 	cport[dev] = -1;
diff --git a/sound/isa/opti9xx/opti92x-ad1848.c b/sound/isa/opti9xx/opti92x-ad1848.c
index 41c047e665ec..0797ca441a37 100644
--- a/sound/isa/opti9xx/opti92x-ad1848.c
+++ b/sound/isa/opti9xx/opti92x-ad1848.c
@@ -68,7 +68,9 @@ MODULE_SUPPORTED_DEVICE("{{OPTi,82C924 (AD1848)},"
 static int index = SNDRV_DEFAULT_IDX1;	/* Index 0-MAX */
 static char *id = SNDRV_DEFAULT_STR1;		/* ID for this card */
 //static int enable = SNDRV_DEFAULT_ENABLE1;	/* Enable this card */
+#ifdef CONFIG_PNP
 static int isapnp = 1;			/* Enable ISA PnP detection */
+#endif
 static long port = SNDRV_DEFAULT_PORT1; 	/* 0x530,0xe80,0xf40,0x604 */
 static long mpu_port = SNDRV_DEFAULT_PORT1;	/* 0x300,0x310,0x320,0x330 */
 static long fm_port = SNDRV_DEFAULT_PORT1;	/* 0x388 */
@@ -85,8 +87,10 @@ module_param(id, charp, 0444);
 MODULE_PARM_DESC(id, "ID string for opti9xx based soundcard.");
 //module_param(enable, bool, 0444);
 //MODULE_PARM_DESC(enable, "Enable opti9xx soundcard.");
+#ifdef CONFIG_PNP
 module_param(isapnp, bool, 0444);
 MODULE_PARM_DESC(isapnp, "Enable ISA PnP detection for specified soundcard.");
+#endif
 module_param(port, long, 0444);
 MODULE_PARM_DESC(port, "WSS port # for opti9xx driver.");
 module_param(mpu_port, long, 0444);
@@ -688,7 +692,7 @@ static void snd_card_opti9xx_free(struct snd_card *card)
 	if (chip) {
 #ifdef OPTi93X
 		struct snd_cs4231 *codec = chip->codec;
-		if (codec->irq > 0) {
+		if (codec && codec->irq > 0) {
 			disable_irq(codec->irq);
 			free_irq(codec->irq, codec);
 		}
diff --git a/sound/mips/au1x00.c b/sound/mips/au1x00.c
index ee0741f9eb53..fbef38a9604a 100644
--- a/sound/mips/au1x00.c
+++ b/sound/mips/au1x00.c
@@ -38,7 +38,6 @@
 #include <linux/interrupt.h>
 #include <linux/init.h>
 #include <linux/slab.h>
-#include <linux/version.h>
 #include <sound/core.h>
 #include <sound/initval.h>
 #include <sound/pcm.h>
diff --git a/sound/oss/vidc.c b/sound/oss/vidc.c
index bb4a0969f461..725fef0f59a3 100644
--- a/sound/oss/vidc.c
+++ b/sound/oss/vidc.c
@@ -22,7 +22,7 @@
 #include <linux/kernel.h>
 #include <linux/interrupt.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/dma.h>
 #include <asm/io.h>
 #include <asm/hardware/iomd.h>
diff --git a/sound/oss/vidc_fill.S b/sound/oss/vidc_fill.S
index 01ccc074cc11..bed34921d176 100644
--- a/sound/oss/vidc_fill.S
+++ b/sound/oss/vidc_fill.S
@@ -11,7 +11,7 @@
  */
 #include <linux/linkage.h>
 #include <asm/assembler.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/hardware/iomd.h>
 
 		.text
diff --git a/sound/oss/waveartist.c b/sound/oss/waveartist.c
index 88490418f932..c47842fad657 100644
--- a/sound/oss/waveartist.c
+++ b/sound/oss/waveartist.c
@@ -47,7 +47,7 @@
 #include "waveartist.h"
 
 #ifdef CONFIG_ARM
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/mach-types.h>
 #endif
 
diff --git a/sound/pci/Kconfig b/sound/pci/Kconfig
index f7d95b224a98..31f52d3fc21f 100644
--- a/sound/pci/Kconfig
+++ b/sound/pci/Kconfig
@@ -845,7 +845,7 @@ config SND_VIRTUOSO
 	select SND_OXYGEN_LIB
 	help
 	  Say Y here to include support for sound cards based on the
-	  Asus AV100/AV200 chips, i.e., Xonar D2, DX and D2X.
+	  Asus AV100/AV200 chips, i.e., Xonar D1, DX, D2 and D2X.
 
 	  To compile this driver as a module, choose M here: the module
 	  will be called snd-virtuoso.
diff --git a/sound/pci/ac97/ac97_codec.c b/sound/pci/ac97/ac97_codec.c
index 07364c00768a..8c49a00a5e39 100644
--- a/sound/pci/ac97/ac97_codec.c
+++ b/sound/pci/ac97/ac97_codec.c
@@ -161,6 +161,7 @@ static const struct ac97_codec_id snd_ac97_codec_ids[] = {
 { 0x50534304, 0xffffffff, "UCB1400",		patch_ucb1400,	NULL },
 { 0x53494c20, 0xffffffe0, "Si3036,8",		mpatch_si3036,	mpatch_si3036, AC97_MODEM_PATCH },
 { 0x54524102, 0xffffffff, "TR28022",		NULL,		NULL },
+{ 0x54524103, 0xffffffff, "TR28023",		NULL,		NULL },
 { 0x54524106, 0xffffffff, "TR28026",		NULL,		NULL },
 { 0x54524108, 0xffffffff, "TR28028",		patch_tritech_tr28028,	NULL }, // added by xin jin [07/09/99]
 { 0x54524123, 0xffffffff, "TR28602",		NULL,		NULL }, // only guess --jk [TR28023 = eMicro EM28023 (new CT1297)]
@@ -169,7 +170,7 @@ static const struct ac97_codec_id snd_ac97_codec_ids[] = {
 { 0x56494170, 0xffffffff, "VIA1617A",		patch_vt1617a,	NULL }, // modified VT1616 with S/PDIF
 { 0x56494182, 0xffffffff, "VIA1618",		NULL,		NULL },
 { 0x57454301, 0xffffffff, "W83971D",		NULL,		NULL },
-{ 0x574d4c00, 0xffffffff, "WM9701A",		NULL,		NULL },
+{ 0x574d4c00, 0xffffffff, "WM9701,WM9701A",	NULL,		NULL },
 { 0x574d4C03, 0xffffffff, "WM9703,WM9707,WM9708,WM9717", patch_wolfson03, NULL},
 { 0x574d4C04, 0xffffffff, "WM9704M,WM9704Q",	patch_wolfson04, NULL},
 { 0x574d4C05, 0xffffffff, "WM9705,WM9710",	patch_wolfson05, NULL},
diff --git a/sound/pci/ac97/ac97_patch.c b/sound/pci/ac97/ac97_patch.c
index 0746e9ccc20b..f4fbc795ee81 100644
--- a/sound/pci/ac97/ac97_patch.c
+++ b/sound/pci/ac97/ac97_patch.c
@@ -3381,8 +3381,8 @@ static struct snd_kcontrol *snd_ac97_find_mixer_ctl(struct snd_ac97 *ac97,
 }
 
 /* create a virtual master control and add slaves */
-int snd_ac97_add_vmaster(struct snd_ac97 *ac97, char *name,
-			 const unsigned int *tlv, const char **slaves)
+static int snd_ac97_add_vmaster(struct snd_ac97 *ac97, char *name,
+				const unsigned int *tlv, const char **slaves)
 {
 	struct snd_kcontrol *kctl;
 	const char **s;
diff --git a/sound/pci/azt3328.h b/sound/pci/azt3328.h
index 7e3e8942d073..974e05122f00 100644
--- a/sound/pci/azt3328.h
+++ b/sound/pci/azt3328.h
@@ -94,7 +94,7 @@ enum azf_freq_t {
   AZF_FREQ(48000),
   AZF_FREQ(66200),
 #undef AZF_FREQ
-} AZF_FREQUENCIES;
+};
 
 /** recording area (see also: playback bit flag definitions) **/
 #define IDX_IO_REC_FLAGS	0x20 /* ??, PU:0x0000 */
@@ -210,7 +210,7 @@ enum azf_freq_t {
 
 enum {
 	AZF_GAME_LEGACY_IO_PORT = 0x200
-} AZF_GAME_CONFIGS;
+};
 
 #define IDX_GAME_LEGACY_COMPATIBLE	0x00
 	/* in some operation mode, writing anything to this port
diff --git a/sound/pci/ca0106/ca0106_main.c b/sound/pci/ca0106/ca0106_main.c
index 2f8b28add276..6abe8a3bd365 100644
--- a/sound/pci/ca0106/ca0106_main.c
+++ b/sound/pci/ca0106/ca0106_main.c
@@ -249,11 +249,12 @@ static struct snd_ca0106_details ca0106_chip_details[] = {
 	   .name   = "MSI K8N Diamond MB [SB0438]",
 	   .gpio_type = 2,
 	   .i2c_adc = 1 } ,
-	 /* Another MSI K8N Diamond MB, which has apprently a different SSID */
+	 /* MSI K8N Diamond PLUS MB */
 	 { .serial = 0x10091102,
 	   .name   = "MSI K8N Diamond MB",
 	   .gpio_type = 2,
-	   .i2c_adc = 1 } ,
+	   .i2c_adc = 1,
+	   .spi_dac = 2 },
 	 /* Shuttle XPC SD31P which has an onboard Creative Labs
 	  * Sound Blaster Live! 24-bit EAX
 	  * high-definition 7.1 audio processor".
diff --git a/sound/pci/ens1370.c b/sound/pci/ens1370.c
index fbf1124f7c79..9bf95367c882 100644
--- a/sound/pci/ens1370.c
+++ b/sound/pci/ens1370.c
@@ -522,7 +522,7 @@ static unsigned int snd_es1371_wait_src_ready(struct ensoniq * ensoniq)
 			return r;
 		cond_resched();
 	}
-	snd_printk(KERN_ERR "wait source ready timeout 0x%lx [0x%x]\n",
+	snd_printk(KERN_ERR "wait src ready timeout 0x%lx [0x%x]\n",
 		   ES_REG(ensoniq, 1371_SMPRATE), r);
 	return 0;
 }
@@ -1629,6 +1629,7 @@ static int __devinit snd_ensoniq_1371_mixer(struct ensoniq *ensoniq,
 	memset(&ac97, 0, sizeof(ac97));
 	ac97.private_data = ensoniq;
 	ac97.private_free = snd_ensoniq_mixer_free_ac97;
+	ac97.pci = ensoniq->pci;
 	ac97.scaps = AC97_SCAP_AUDIO;
 	if ((err = snd_ac97_mixer(pbus, &ac97, &ensoniq->u.es1371.ac97)) < 0)
 		return err;
diff --git a/sound/pci/hda/hda_intel.c b/sound/pci/hda/hda_intel.c
index 16715a68ba5e..1c53e337ecb2 100644
--- a/sound/pci/hda/hda_intel.c
+++ b/sound/pci/hda/hda_intel.c
@@ -101,6 +101,7 @@ MODULE_SUPPORTED_DEVICE("{{Intel, ICH6},"
 			 "{Intel, ICH8},"
 			 "{Intel, ICH9},"
 			 "{Intel, ICH10},"
+			 "{Intel, PCH},"
 			 "{Intel, SCH},"
 			 "{ATI, SB450},"
 			 "{ATI, SB600},"
@@ -277,6 +278,9 @@ enum {
 /* Defines for Nvidia HDA support */
 #define NVIDIA_HDA_TRANSREG_ADDR      0x4e
 #define NVIDIA_HDA_ENABLE_COHBITS     0x0f
+#define NVIDIA_HDA_ISTRM_COH          0x4d
+#define NVIDIA_HDA_OSTRM_COH          0x4c
+#define NVIDIA_HDA_ENABLE_COHBIT      0x01
 
 /* Defines for Intel SCH HDA snoop control */
 #define INTEL_SCH_HDA_DEVC      0x78
@@ -899,6 +903,12 @@ static void azx_init_pci(struct azx *chip)
 		update_pci_byte(chip->pci,
 				NVIDIA_HDA_TRANSREG_ADDR,
 				0x0f, NVIDIA_HDA_ENABLE_COHBITS);
+		update_pci_byte(chip->pci,
+				NVIDIA_HDA_ISTRM_COH,
+				0x01, NVIDIA_HDA_ENABLE_COHBIT);
+		update_pci_byte(chip->pci,
+				NVIDIA_HDA_OSTRM_COH,
+				0x01, NVIDIA_HDA_ENABLE_COHBIT);
 		break;
 	case AZX_DRIVER_SCH:
 		pci_read_config_word(chip->pci, INTEL_SCH_HDA_DEVC, &snoop);
@@ -1047,9 +1057,13 @@ static int azx_setup_periods(struct azx *chip,
 	pos_adj = bdl_pos_adj[chip->dev_index];
 	if (pos_adj > 0) {
 		struct snd_pcm_runtime *runtime = substream->runtime;
+		int pos_align = pos_adj;
 		pos_adj = (pos_adj * runtime->rate + 47999) / 48000;
 		if (!pos_adj)
-			pos_adj = 1;
+			pos_adj = pos_align;
+		else
+			pos_adj = ((pos_adj + pos_align - 1) / pos_align) *
+				pos_align;
 		pos_adj = frames_to_bytes(runtime, pos_adj);
 		if (pos_adj >= period_bytes) {
 			snd_printk(KERN_WARNING "Too big adjustment %d\n",
@@ -2259,6 +2273,8 @@ static struct pci_device_id azx_ids[] = {
 	{ PCI_DEVICE(0x8086, 0x293f), .driver_data = AZX_DRIVER_ICH },
 	{ PCI_DEVICE(0x8086, 0x3a3e), .driver_data = AZX_DRIVER_ICH },
 	{ PCI_DEVICE(0x8086, 0x3a6e), .driver_data = AZX_DRIVER_ICH },
+	/* PCH */
+	{ PCI_DEVICE(0x8086, 0x3b56), .driver_data = AZX_DRIVER_ICH },
 	/* SCH */
 	{ PCI_DEVICE(0x8086, 0x811b), .driver_data = AZX_DRIVER_SCH },
 	/* ATI SB 450/600 */
@@ -2268,6 +2284,7 @@ static struct pci_device_id azx_ids[] = {
 	{ PCI_DEVICE(0x1002, 0x793b), .driver_data = AZX_DRIVER_ATIHDMI },
 	{ PCI_DEVICE(0x1002, 0x7919), .driver_data = AZX_DRIVER_ATIHDMI },
 	{ PCI_DEVICE(0x1002, 0x960f), .driver_data = AZX_DRIVER_ATIHDMI },
+	{ PCI_DEVICE(0x1002, 0x970f), .driver_data = AZX_DRIVER_ATIHDMI },
 	{ PCI_DEVICE(0x1002, 0xaa00), .driver_data = AZX_DRIVER_ATIHDMI },
 	{ PCI_DEVICE(0x1002, 0xaa08), .driver_data = AZX_DRIVER_ATIHDMI },
 	{ PCI_DEVICE(0x1002, 0xaa10), .driver_data = AZX_DRIVER_ATIHDMI },
diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c
index 2807bc840d26..66025161bd69 100644
--- a/sound/pci/hda/patch_realtek.c
+++ b/sound/pci/hda/patch_realtek.c
@@ -122,6 +122,8 @@ enum {
 /* ALC269 models */
 enum {
 	ALC269_BASIC,
+	ALC269_ASUS_EEEPC_P703,
+	ALC269_ASUS_EEEPC_P901,
 	ALC269_AUTO,
 	ALC269_MODEL_LAST /* last tag */
 };
@@ -950,7 +952,7 @@ do_sku:
 					    tmp | 0x2010);
 			break;
 		case 0x10ec0888:
-			alc888_coef_init(codec);
+			/*alc888_coef_init(codec);*/ /* called in alc_init() */
 			break;
 		case 0x10ec0267:
 		case 0x10ec0268:
@@ -2437,6 +2439,8 @@ static int alc_init(struct hda_codec *codec)
 	unsigned int i;
 
 	alc_fix_pll(codec);
+	if (codec->vendor_id == 0x10ec0888)
+		alc888_coef_init(codec);
 
 	for (i = 0; i < spec->num_init_verbs; i++)
 		snd_hda_sequence_write(codec, spec->init_verbs[i]);
@@ -6193,7 +6197,6 @@ static struct snd_pci_quirk alc882_cfg_tbl[] = {
 	SND_PCI_QUIRK(0x1043, 0x817f, "Asus P5LD2", ALC882_6ST_DIG),
 	SND_PCI_QUIRK(0x1043, 0x81d8, "Asus P5WD", ALC882_6ST_DIG),
 	SND_PCI_QUIRK(0x105b, 0x6668, "Foxconn", ALC882_6ST_DIG),
-	SND_PCI_QUIRK(0x106b, 0x00a0, "Apple iMac 24''", ALC885_IMAC24),
 	SND_PCI_QUIRK(0x1458, 0xa002, "Gigabyte P35 DS3R", ALC882_6ST_DIG),
 	SND_PCI_QUIRK(0x1462, 0x28fb, "Targa T8", ALC882_TARGA), /* MSI-1049 T8  */
 	SND_PCI_QUIRK(0x1462, 0x6668, "MSI", ALC882_6ST_DIG),
@@ -6435,6 +6438,39 @@ static void alc882_auto_init_analog_input(struct hda_codec *codec)
 	}
 }
 
+static void alc882_auto_init_input_src(struct hda_codec *codec)
+{
+	struct alc_spec *spec = codec->spec;
+	const struct hda_input_mux *imux = spec->input_mux;
+	int c;
+
+	for (c = 0; c < spec->num_adc_nids; c++) {
+		hda_nid_t conn_list[HDA_MAX_NUM_INPUTS];
+		hda_nid_t nid = spec->capsrc_nids[c];
+		int conns, mute, idx, item;
+
+		conns = snd_hda_get_connections(codec, nid, conn_list,
+						ARRAY_SIZE(conn_list));
+		if (conns < 0)
+			continue;
+		for (idx = 0; idx < conns; idx++) {
+			/* if the current connection is the selected one,
+			 * unmute it as default - otherwise mute it
+			 */
+			mute = AMP_IN_MUTE(idx);
+			for (item = 0; item < imux->num_items; item++) {
+				if (imux->items[item].index == idx) {
+					if (spec->cur_mux[c] == item)
+						mute = AMP_IN_UNMUTE(idx);
+					break;
+				}
+			}
+			snd_hda_codec_write(codec, nid, 0,
+					    AC_VERB_SET_AMP_GAIN_MUTE, mute);
+		}
+	}
+}
+
 /* add mic boosts if needed */
 static int alc_auto_add_mic_boost(struct hda_codec *codec)
 {
@@ -6489,6 +6525,7 @@ static void alc882_auto_init(struct hda_codec *codec)
 	alc882_auto_init_multi_out(codec);
 	alc882_auto_init_hp_out(codec);
 	alc882_auto_init_analog_input(codec);
+	alc882_auto_init_input_src(codec);
 	if (spec->unsol_event)
 		alc_sku_automute(codec);
 }
@@ -7905,6 +7942,7 @@ static struct snd_pci_quirk alc883_cfg_tbl[] = {
 	SND_PCI_QUIRK(0x1025, 0x006c, "Acer Aspire 9810", ALC883_ACER_ASPIRE),
 	SND_PCI_QUIRK(0x1025, 0x0110, "Acer Aspire", ALC883_ACER_ASPIRE),
 	SND_PCI_QUIRK(0x1025, 0x0112, "Acer Aspire 9303", ALC883_ACER_ASPIRE),
+	SND_PCI_QUIRK(0x1025, 0x0121, "Acer Aspire 5920G", ALC883_ACER_ASPIRE), 
 	SND_PCI_QUIRK(0x1025, 0, "Acer laptop", ALC883_ACER), /* default Acer */
 	SND_PCI_QUIRK(0x1028, 0x020d, "Dell Inspiron 530", ALC888_6ST_DELL),
 	SND_PCI_QUIRK(0x103c, 0x2a3d, "HP Pavillion", ALC883_6ST_DIG),
@@ -8282,6 +8320,8 @@ static void alc883_auto_init_analog_input(struct hda_codec *codec)
 	}
 }
 
+#define alc883_auto_init_input_src	alc882_auto_init_input_src
+
 /* almost identical with ALC880 parser... */
 static int alc883_parse_auto_config(struct hda_codec *codec)
 {
@@ -8312,6 +8352,7 @@ static void alc883_auto_init(struct hda_codec *codec)
 	alc883_auto_init_multi_out(codec);
 	alc883_auto_init_hp_out(codec);
 	alc883_auto_init_analog_input(codec);
+	alc883_auto_init_input_src(codec);
 	if (spec->unsol_event)
 		alc_sku_automute(codec);
 }
@@ -8386,8 +8427,6 @@ static int patch_alc883(struct hda_codec *codec)
 	codec->patch_ops = alc_patch_ops;
 	if (board_config == ALC883_AUTO)
 		spec->init_hook = alc883_auto_init;
-	else if (codec->vendor_id == 0x10ec0888)
-		spec->init_hook = alc888_coef_init;
 
 #ifdef CONFIG_SND_HDA_POWER_SAVE
 	if (!spec->loopback.amplist)
@@ -9660,6 +9699,7 @@ static int alc262_parse_auto_config(struct hda_codec *codec)
 #define alc262_auto_init_multi_out	alc882_auto_init_multi_out
 #define alc262_auto_init_hp_out		alc882_auto_init_hp_out
 #define alc262_auto_init_analog_input	alc882_auto_init_analog_input
+#define alc262_auto_init_input_src	alc882_auto_init_input_src
 
 
 /* init callback for auto-configuration model -- overriding the default init */
@@ -9669,6 +9709,7 @@ static void alc262_auto_init(struct hda_codec *codec)
 	alc262_auto_init_multi_out(codec);
 	alc262_auto_init_hp_out(codec);
 	alc262_auto_init_analog_input(codec);
+	alc262_auto_init_input_src(codec);
 	if (spec->unsol_event)
 		alc_sku_automute(codec);
 }
@@ -10946,7 +10987,23 @@ static int patch_alc268(struct hda_codec *codec)
 
 static hda_nid_t alc269_adc_nids[1] = {
 	/* ADC1 */
-	0x07,
+	0x08,
+};
+
+static struct hda_input_mux alc269_eeepc_dmic_capture_source = {
+	.num_items = 2,
+	.items = {
+		{ "i-Mic", 0x5 },
+		{ "e-Mic", 0x0 },
+	},
+};
+
+static struct hda_input_mux alc269_eeepc_amic_capture_source = {
+	.num_items = 2,
+	.items = {
+		{ "i-Mic", 0x1 },
+		{ "e-Mic", 0x0 },
+	},
 };
 
 #define alc269_modes		alc260_modes
@@ -10968,10 +11025,27 @@ static struct snd_kcontrol_new alc269_base_mixer[] = {
 	{ } /* end */
 };
 
+/* bind volumes of both NID 0x0c and 0x0d */
+static struct hda_bind_ctls alc269_epc_bind_vol = {
+	.ops = &snd_hda_bind_vol,
+	.values = {
+		HDA_COMPOSE_AMP_VAL(0x02, 3, 0, HDA_OUTPUT),
+		HDA_COMPOSE_AMP_VAL(0x03, 3, 0, HDA_OUTPUT),
+		0
+	},
+};
+
+static struct snd_kcontrol_new alc269_eeepc_mixer[] = {
+	HDA_CODEC_MUTE("iSpeaker Playback Switch", 0x14, 0x0, HDA_OUTPUT),
+	HDA_BIND_VOL("LineOut Playback Volume", &alc269_epc_bind_vol),
+	HDA_CODEC_MUTE("LineOut Playback Switch", 0x15, 0x0, HDA_OUTPUT),
+	{ } /* end */
+};
+
 /* capture mixer elements */
 static struct snd_kcontrol_new alc269_capture_mixer[] = {
-	HDA_CODEC_VOLUME("Capture Volume", 0x07, 0x0, HDA_INPUT),
-	HDA_CODEC_MUTE("Capture Switch", 0x07, 0x0, HDA_INPUT),
+	HDA_CODEC_VOLUME("Capture Volume", 0x08, 0x0, HDA_INPUT),
+	HDA_CODEC_MUTE("Capture Switch", 0x08, 0x0, HDA_INPUT),
 	{
 		.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
 		/* The multiple "Capture Source" controls confuse alsamixer
@@ -10987,6 +11061,13 @@ static struct snd_kcontrol_new alc269_capture_mixer[] = {
 	{ } /* end */
 };
 
+/* capture mixer elements */
+static struct snd_kcontrol_new alc269_epc_capture_mixer[] = {
+	HDA_CODEC_VOLUME("Capture Volume", 0x08, 0x0, HDA_INPUT),
+	HDA_CODEC_MUTE("Capture Switch", 0x08, 0x0, HDA_INPUT),
+	{ } /* end */
+};
+
 /*
  * generic initialization of ADC, input mixers and output mixers
  */
@@ -10994,7 +11075,7 @@ static struct hda_verb alc269_init_verbs[] = {
 	/*
 	 * Unmute ADC0 and set the default input to mic-in
 	 */
-	{0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
+	{0x08, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
 
 	/* Mute input amps (PCBeep, Line In, Mic 1 & Mic 2) of the
 	 * analog-loopback mixer widget
@@ -11057,6 +11138,98 @@ static struct hda_verb alc269_init_verbs[] = {
 	{ }
 };
 
+static struct hda_verb alc269_eeepc_dmic_init_verbs[] = {
+	{0x15, AC_VERB_SET_CONNECT_SEL, 0x01},
+	{0x23, AC_VERB_SET_CONNECT_SEL, 0x05},
+	{0x02, AC_VERB_SET_AMP_GAIN_MUTE, 0xb026 },
+	{0x08, AC_VERB_SET_AMP_GAIN_MUTE, (0x7019 | (0x00 << 8))},
+	{0x12, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN},
+	{0x18, AC_VERB_SET_UNSOLICITED_ENABLE, AC_USRSP_EN | ALC880_MIC_EVENT},
+	{0x15, AC_VERB_SET_UNSOLICITED_ENABLE, AC_USRSP_EN | ALC880_HP_EVENT},
+	{}
+};
+
+static struct hda_verb alc269_eeepc_amic_init_verbs[] = {
+	{0x15, AC_VERB_SET_CONNECT_SEL, 0x01},
+	{0x23, AC_VERB_SET_CONNECT_SEL, 0x01},
+	{0x02, AC_VERB_SET_AMP_GAIN_MUTE, 0xb026 },
+	{0x08, AC_VERB_SET_AMP_GAIN_MUTE, (0x701b | (0x00 << 8))},
+	{0x18, AC_VERB_SET_UNSOLICITED_ENABLE, AC_USRSP_EN | ALC880_MIC_EVENT},
+	{0x15, AC_VERB_SET_UNSOLICITED_ENABLE, AC_USRSP_EN | ALC880_HP_EVENT},
+	{}
+};
+
+/* toggle speaker-output according to the hp-jack state */
+static void alc269_speaker_automute(struct hda_codec *codec)
+{
+	unsigned int present;
+	unsigned int bits;
+
+	present = snd_hda_codec_read(codec, 0x15, 0,
+				     AC_VERB_GET_PIN_SENSE, 0) & 0x80000000;
+	bits = present ? AMP_IN_MUTE(0) : 0;
+	snd_hda_codec_amp_stereo(codec, 0x0c, HDA_INPUT, 0,
+				 AMP_IN_MUTE(0), bits);
+	snd_hda_codec_amp_stereo(codec, 0x0c, HDA_INPUT, 1,
+				 AMP_IN_MUTE(0), bits);
+}
+
+static void alc269_eeepc_dmic_automute(struct hda_codec *codec)
+{
+	unsigned int present;
+
+	present = snd_hda_codec_read(codec, 0x18, 0, AC_VERB_GET_PIN_SENSE, 0)
+		& AC_PINSENSE_PRESENCE;
+	snd_hda_codec_write(codec, 0x23, 0, AC_VERB_SET_CONNECT_SEL,
+			    present ? 0 : 5);
+}
+
+static void alc269_eeepc_amic_automute(struct hda_codec *codec)
+{
+	unsigned int present;
+
+	present = snd_hda_codec_read(codec, 0x18, 0, AC_VERB_GET_PIN_SENSE, 0)
+		& AC_PINSENSE_PRESENCE;
+	snd_hda_codec_write(codec, 0x24, 0, AC_VERB_SET_AMP_GAIN_MUTE,
+			    present ? AMP_IN_UNMUTE(0) : AMP_IN_MUTE(0));
+	snd_hda_codec_write(codec, 0x24, 0, AC_VERB_SET_AMP_GAIN_MUTE,
+			    present ? AMP_IN_MUTE(1) : AMP_IN_UNMUTE(1));
+}
+
+/* unsolicited event for HP jack sensing */
+static void alc269_eeepc_dmic_unsol_event(struct hda_codec *codec,
+					  unsigned int res)
+{
+	if ((res >> 26) == ALC880_HP_EVENT)
+		alc269_speaker_automute(codec);
+
+	if ((res >> 26) == ALC880_MIC_EVENT)
+		alc269_eeepc_dmic_automute(codec);
+}
+
+static void alc269_eeepc_dmic_inithook(struct hda_codec *codec)
+{
+	alc269_speaker_automute(codec);
+	alc269_eeepc_dmic_automute(codec);
+}
+
+/* unsolicited event for HP jack sensing */
+static void alc269_eeepc_amic_unsol_event(struct hda_codec *codec,
+					  unsigned int res)
+{
+	if ((res >> 26) == ALC880_HP_EVENT)
+		alc269_speaker_automute(codec);
+
+	if ((res >> 26) == ALC880_MIC_EVENT)
+		alc269_eeepc_amic_automute(codec);
+}
+
+static void alc269_eeepc_amic_inithook(struct hda_codec *codec)
+{
+	alc269_speaker_automute(codec);
+	alc269_eeepc_amic_automute(codec);
+}
+
 /* add playback controls from the parsed DAC table */
 static int alc269_auto_create_multi_out_ctls(struct alc_spec *spec,
 					     const struct auto_pin_cfg *cfg)
@@ -11188,6 +11361,9 @@ static int alc269_parse_auto_config(struct hda_codec *codec)
 	if (err < 0)
 		return err;
 
+	spec->mixers[spec->num_mixers] = alc269_capture_mixer;
+	spec->num_mixers++;
+
 	return 1;
 }
 
@@ -11215,12 +11391,16 @@ static const char *alc269_models[ALC269_MODEL_LAST] = {
 };
 
 static struct snd_pci_quirk alc269_cfg_tbl[] = {
+	SND_PCI_QUIRK(0x1043, 0x8330, "ASUS Eeepc P703 P900A",
+		      ALC269_ASUS_EEEPC_P703),
+	SND_PCI_QUIRK(0x1043, 0x831a, "ASUS Eeepc P901",
+		      ALC269_ASUS_EEEPC_P901),
 	{}
 };
 
 static struct alc_config_preset alc269_presets[] = {
 	[ALC269_BASIC] = {
-		.mixers = { alc269_base_mixer },
+		.mixers = { alc269_base_mixer, alc269_capture_mixer },
 		.init_verbs = { alc269_init_verbs },
 		.num_dacs = ARRAY_SIZE(alc269_dac_nids),
 		.dac_nids = alc269_dac_nids,
@@ -11229,6 +11409,32 @@ static struct alc_config_preset alc269_presets[] = {
 		.channel_mode = alc269_modes,
 		.input_mux = &alc269_capture_source,
 	},
+	[ALC269_ASUS_EEEPC_P703] = {
+		.mixers = { alc269_eeepc_mixer, alc269_epc_capture_mixer },
+		.init_verbs = { alc269_init_verbs,
+				alc269_eeepc_amic_init_verbs },
+		.num_dacs = ARRAY_SIZE(alc269_dac_nids),
+		.dac_nids = alc269_dac_nids,
+		.hp_nid = 0x03,
+		.num_channel_mode = ARRAY_SIZE(alc269_modes),
+		.channel_mode = alc269_modes,
+		.input_mux = &alc269_eeepc_amic_capture_source,
+		.unsol_event = alc269_eeepc_amic_unsol_event,
+		.init_hook = alc269_eeepc_amic_inithook,
+	},
+	[ALC269_ASUS_EEEPC_P901] = {
+		.mixers = { alc269_eeepc_mixer, alc269_epc_capture_mixer},
+		.init_verbs = { alc269_init_verbs,
+				alc269_eeepc_dmic_init_verbs },
+		.num_dacs = ARRAY_SIZE(alc269_dac_nids),
+		.dac_nids = alc269_dac_nids,
+		.hp_nid = 0x03,
+		.num_channel_mode = ARRAY_SIZE(alc269_modes),
+		.channel_mode = alc269_modes,
+		.input_mux = &alc269_eeepc_dmic_capture_source,
+		.unsol_event = alc269_eeepc_dmic_unsol_event,
+		.init_hook = alc269_eeepc_dmic_inithook,
+	},
 };
 
 static int patch_alc269(struct hda_codec *codec)
@@ -11282,8 +11488,6 @@ static int patch_alc269(struct hda_codec *codec)
 
 	spec->adc_nids = alc269_adc_nids;
 	spec->num_adc_nids = ARRAY_SIZE(alc269_adc_nids);
-	spec->mixers[spec->num_mixers] = alc269_capture_mixer;
-	spec->num_mixers++;
 
 	codec->patch_ops = alc_patch_ops;
 	if (board_config == ALC269_AUTO)
@@ -12994,6 +13198,7 @@ static struct snd_pci_quirk alc861vd_cfg_tbl[] = {
 	SND_PCI_QUIRK(0x103c, 0x30bf, "HP TX1000", ALC861VD_HP),
 	SND_PCI_QUIRK(0x1043, 0x12e2, "Asus z35m", ALC660VD_3ST),
 	SND_PCI_QUIRK(0x1043, 0x1339, "Asus G1", ALC660VD_3ST),
+	SND_PCI_QUIRK(0x1043, 0x1633, "Asus V1Sn", ALC861VD_LENOVO),
 	SND_PCI_QUIRK(0x1043, 0x81e7, "ASUS", ALC660VD_3ST_DIG),
 	SND_PCI_QUIRK(0x10de, 0x03f0, "Realtek ALC660 demo", ALC660VD_3ST),
 	SND_PCI_QUIRK(0x1179, 0xff00, "Toshiba A135", ALC861VD_LENOVO),
@@ -13163,6 +13368,8 @@ static void alc861vd_auto_init_analog_input(struct hda_codec *codec)
 	}
 }
 
+#define alc861vd_auto_init_input_src	alc882_auto_init_input_src
+
 #define alc861vd_idx_to_mixer_vol(nid)		((nid) + 0x02)
 #define alc861vd_idx_to_mixer_switch(nid)	((nid) + 0x0c)
 
@@ -13345,6 +13552,7 @@ static void alc861vd_auto_init(struct hda_codec *codec)
 	alc861vd_auto_init_multi_out(codec);
 	alc861vd_auto_init_hp_out(codec);
 	alc861vd_auto_init_analog_input(codec);
+	alc861vd_auto_init_input_src(codec);
 	if (spec->unsol_event)
 		alc_sku_automute(codec);
 }
@@ -13858,6 +14066,13 @@ static struct hda_verb alc662_auto_init_verbs[] = {
 	{ }
 };
 
+/* additional verbs for ALC663 */
+static struct hda_verb alc663_auto_init_verbs[] = {
+	{0x0f, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
+	{0x0f, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
+	{ }
+};
+
 static struct hda_verb alc663_m51va_init_verbs[] = {
 	{0x21, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP},
 	{0x21, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
@@ -14386,6 +14601,14 @@ static int alc662_auto_create_extra_out(struct alc_spec *spec, hda_nid_t pin,
 	if (!pin)
 		return 0;
 
+	if (pin == 0x17) {
+		/* ALC663 has a mono output pin on 0x17 */
+		sprintf(name, "%s Playback Switch", pfx);
+		err = add_control(spec, ALC_CTL_WIDGET_MUTE, name,
+				  HDA_COMPOSE_AMP_VAL(pin, 2, 0, HDA_OUTPUT));
+		return err;
+	}
+
 	if (alc880_is_fixed_pin(pin)) {
 		nid = alc880_idx_to_dac(alc880_fixed_pin_idx(pin));
                 /* printk("DAC nid=%x\n",nid); */
@@ -14510,6 +14733,8 @@ static void alc662_auto_init_analog_input(struct hda_codec *codec)
 	}
 }
 
+#define alc662_auto_init_input_src	alc882_auto_init_input_src
+
 static int alc662_parse_auto_config(struct hda_codec *codec)
 {
 	struct alc_spec *spec = codec->spec;
@@ -14554,6 +14779,14 @@ static int alc662_parse_auto_config(struct hda_codec *codec)
 	spec->input_mux = &spec->private_imux;
 	
 	spec->init_verbs[spec->num_init_verbs++] = alc662_auto_init_verbs;
+	if (codec->vendor_id == 0x10ec0663)
+		spec->init_verbs[spec->num_init_verbs++] =
+			alc663_auto_init_verbs;
+
+	err = alc_auto_add_mic_boost(codec);
+	if (err < 0)
+		return err;
+
 	spec->mixers[spec->num_mixers] = alc662_capture_mixer;
 	spec->num_mixers++;
 	return 1;
@@ -14566,6 +14799,7 @@ static void alc662_auto_init(struct hda_codec *codec)
 	alc662_auto_init_multi_out(codec);
 	alc662_auto_init_hp_out(codec);
 	alc662_auto_init_analog_input(codec);
+	alc662_auto_init_input_src(codec);
 	if (spec->unsol_event)
 		alc_sku_automute(codec);
 }
diff --git a/sound/pci/hda/patch_sigmatel.c b/sound/pci/hda/patch_sigmatel.c
index 08cb77f51880..ad994fcab725 100644
--- a/sound/pci/hda/patch_sigmatel.c
+++ b/sound/pci/hda/patch_sigmatel.c
@@ -94,6 +94,9 @@ enum {
 	STAC_INTEL_MAC_V3,
 	STAC_INTEL_MAC_V4,
 	STAC_INTEL_MAC_V5,
+	STAC_INTEL_MAC_AUTO, /* This model is selected if no module parameter
+			      * is given, one of the above models will be
+			      * chosen according to the subsystem id. */
 	/* for backward compatibility */
 	STAC_MACMINI,
 	STAC_MACBOOK,
@@ -557,8 +560,9 @@ static struct hda_verb dell_eq_core_init[] = {
 };
 
 static struct hda_verb dell_m6_core_init[] = {
-	/* set master volume and direct control */
-	{ 0x1f, AC_VERB_SET_VOLUME_KNOB_CONTROL, 0xff},
+	/* set master volume to max value without distortion
+	 * and direct control */
+	{ 0x1f, AC_VERB_SET_VOLUME_KNOB_CONTROL, 0xec},
 	/* setup audio connections */
 	{ 0x0d, AC_VERB_SET_CONNECT_SEL, 0x00},
 	{ 0x0a, AC_VERB_SET_CONNECT_SEL, 0x01},
@@ -1483,6 +1487,7 @@ static unsigned int *stac922x_brd_tbl[STAC_922X_MODELS] = {
 	[STAC_INTEL_MAC_V3] = intel_mac_v3_pin_configs,
 	[STAC_INTEL_MAC_V4] = intel_mac_v4_pin_configs,
 	[STAC_INTEL_MAC_V5] = intel_mac_v5_pin_configs,
+	[STAC_INTEL_MAC_AUTO] = intel_mac_v3_pin_configs,
 	/* for backward compatibility */
 	[STAC_MACMINI] = intel_mac_v3_pin_configs,
 	[STAC_MACBOOK] = intel_mac_v5_pin_configs,
@@ -1505,6 +1510,7 @@ static const char *stac922x_models[STAC_922X_MODELS] = {
 	[STAC_INTEL_MAC_V3] = "intel-mac-v3",
 	[STAC_INTEL_MAC_V4] = "intel-mac-v4",
 	[STAC_INTEL_MAC_V5] = "intel-mac-v5",
+	[STAC_INTEL_MAC_AUTO] = "intel-mac-auto",
 	/* for backward compatibility */
 	[STAC_MACMINI]	= "macmini",
 	[STAC_MACBOOK]	= "macbook",
@@ -1576,9 +1582,9 @@ static struct snd_pci_quirk stac922x_cfg_tbl[] = {
 	SND_PCI_QUIRK(PCI_VENDOR_ID_INTEL, 0x0707,
 		      "Intel D945P", STAC_D945GTP5),
 	/* other systems  */
-	/* Apple Mac Mini (early 2006) */
+	/* Apple Intel Mac (Mac Mini, MacBook, MacBook Pro...) */
 	SND_PCI_QUIRK(0x8384, 0x7680,
-		      "Mac Mini", STAC_INTEL_MAC_V3),
+		      "Mac", STAC_INTEL_MAC_AUTO),
 	/* Dell systems  */
 	SND_PCI_QUIRK(PCI_VENDOR_ID_DELL, 0x01a7,
 		      "unknown Dell", STAC_922X_DELL_D81),
@@ -3725,7 +3731,7 @@ static int patch_stac922x(struct hda_codec *codec)
 	spec->board_config = snd_hda_check_board_config(codec, STAC_922X_MODELS,
 							stac922x_models,
 							stac922x_cfg_tbl);
-	if (spec->board_config == STAC_INTEL_MAC_V3) {
+	if (spec->board_config == STAC_INTEL_MAC_AUTO) {
 		spec->gpio_mask = spec->gpio_dir = 0x03;
 		spec->gpio_data = 0x03;
 		/* Intel Macs have all same PCI SSID, so we need to check
@@ -3757,6 +3763,9 @@ static int patch_stac922x(struct hda_codec *codec)
 		case 0x106b2200:
 			spec->board_config = STAC_INTEL_MAC_V5;
 			break;
+		default:
+			spec->board_config = STAC_INTEL_MAC_V3;
+			break;
 		}
 	}
 
diff --git a/sound/pci/oxygen/hifier.c b/sound/pci/oxygen/hifier.c
index 7442460583dd..dad393ae040a 100644
--- a/sound/pci/oxygen/hifier.c
+++ b/sound/pci/oxygen/hifier.c
@@ -17,6 +17,7 @@
  *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
  */
 
+#include <linux/delay.h>
 #include <linux/pci.h>
 #include <sound/control.h>
 #include <sound/core.h>
@@ -107,6 +108,9 @@ static void set_ak4396_params(struct oxygen *chip,
 	else
 		value |= AK4396_DFS_QUAD;
 	data->ak4396_ctl2 = value;
+
+	msleep(1); /* wait for the new MCLK to become stable */
+
 	ak4396_write(chip, AK4396_CONTROL_1, AK4396_DIF_24_MSB);
 	ak4396_write(chip, AK4396_CONTROL_2, value);
 	ak4396_write(chip, AK4396_CONTROL_1, AK4396_DIF_24_MSB | AK4396_RSTN);
diff --git a/sound/pci/oxygen/oxygen.c b/sound/pci/oxygen/oxygen.c
index 7c8ae31eb468..c5829d30ef86 100644
--- a/sound/pci/oxygen/oxygen.c
+++ b/sound/pci/oxygen/oxygen.c
@@ -28,6 +28,7 @@
  * GPIO 1 -> DFS1 of AK5385
  */
 
+#include <linux/delay.h>
 #include <linux/mutex.h>
 #include <linux/pci.h>
 #include <sound/ac97_codec.h>
@@ -213,6 +214,9 @@ static void set_ak4396_params(struct oxygen *chip,
 	else
 		value |= AK4396_DFS_QUAD;
 	data->ak4396_ctl2 = value;
+
+	msleep(1); /* wait for the new MCLK to become stable */
+
 	for (i = 0; i < 4; ++i) {
 		ak4396_write(chip, i,
 			     AK4396_CONTROL_1, AK4396_DIF_24_MSB);
diff --git a/sound/pci/oxygen/oxygen_mixer.c b/sound/pci/oxygen/oxygen_mixer.c
index 6facac5aed90..05eb8994c141 100644
--- a/sound/pci/oxygen/oxygen_mixer.c
+++ b/sound/pci/oxygen/oxygen_mixer.c
@@ -512,9 +512,12 @@ static int ac97_switch_get(struct snd_kcontrol *ctl,
 
 static void mute_ac97_ctl(struct oxygen *chip, unsigned int control)
 {
-	unsigned int priv_idx = chip->controls[control]->private_value & 0xff;
+	unsigned int priv_idx;
 	u16 value;
 
+	if (!chip->controls[control])
+		return;
+	priv_idx = chip->controls[control]->private_value & 0xff;
 	value = oxygen_read_ac97(chip, 0, priv_idx);
 	if (!(value & 0x8000)) {
 		oxygen_write_ac97(chip, 0, priv_idx, value | 0x8000);
diff --git a/sound/pci/oxygen/virtuoso.c b/sound/pci/oxygen/virtuoso.c
index 9a2c16bf94e0..01d7b75f9182 100644
--- a/sound/pci/oxygen/virtuoso.c
+++ b/sound/pci/oxygen/virtuoso.c
@@ -36,15 +36,15 @@
  */
 
 /*
- * Xonar DX
- * --------
+ * Xonar D1/DX
+ * -----------
  *
  * CMI8788:
  *
  * I²C <-> CS4398 (front)
  *     <-> CS4362A (surround, center/LFE, back)
  *
- * GPI 0 <- external power present
+ * GPI 0 <- external power present (DX only)
  *
  * GPIO 0 -> enable output to speakers
  * GPIO 1 -> enable front panel I/O
@@ -96,6 +96,7 @@ MODULE_PARM_DESC(enable, "enable card");
 enum {
 	MODEL_D2,
 	MODEL_D2X,
+	MODEL_D1,
 	MODEL_DX,
 };
 
@@ -103,6 +104,7 @@ static struct pci_device_id xonar_ids[] __devinitdata = {
 	{ OXYGEN_PCI_SUBID(0x1043, 0x8269), .driver_data = MODEL_D2 },
 	{ OXYGEN_PCI_SUBID(0x1043, 0x8275), .driver_data = MODEL_DX },
 	{ OXYGEN_PCI_SUBID(0x1043, 0x82b7), .driver_data = MODEL_D2X },
+	{ OXYGEN_PCI_SUBID(0x1043, 0x834f), .driver_data = MODEL_D1 },
 	{ }
 };
 MODULE_DEVICE_TABLE(pci, xonar_ids);
@@ -313,15 +315,12 @@ static void cs43xx_init(struct oxygen *chip)
 	cs4362a_write(chip, 0x01, CS4362A_CPEN);
 }
 
-static void xonar_dx_init(struct oxygen *chip)
+static void xonar_d1_init(struct oxygen *chip)
 {
 	struct xonar_data *data = chip->model_data;
 
 	data->anti_pop_delay = 800;
 	data->output_enable_bit = GPIO_DX_OUTPUT_ENABLE;
-	data->ext_power_reg = OXYGEN_GPI_DATA;
-	data->ext_power_int_reg = OXYGEN_GPI_INTERRUPT_MASK;
-	data->ext_power_bit = GPI_DX_EXT_POWER;
 	data->cs4398_fm = CS4398_FM_SINGLE | CS4398_DEM_NONE | CS4398_DIF_LJUST;
 	data->cs4362a_fm = CS4362A_FM_SINGLE |
 		CS4362A_ATAPI_B_R | CS4362A_ATAPI_A_L;
@@ -345,6 +344,16 @@ static void xonar_dx_init(struct oxygen *chip)
 	snd_component_add(chip->card, "CS5361");
 }
 
+static void xonar_dx_init(struct oxygen *chip)
+{
+	struct xonar_data *data = chip->model_data;
+
+	data->ext_power_reg = OXYGEN_GPI_DATA;
+	data->ext_power_int_reg = OXYGEN_GPI_INTERRUPT_MASK;
+	data->ext_power_bit = GPI_DX_EXT_POWER;
+	xonar_d1_init(chip);
+}
+
 static void xonar_cleanup(struct oxygen *chip)
 {
 	struct xonar_data *data = chip->model_data;
@@ -352,7 +361,7 @@ static void xonar_cleanup(struct oxygen *chip)
 	oxygen_clear_bits16(chip, OXYGEN_GPIO_DATA, data->output_enable_bit);
 }
 
-static void xonar_dx_cleanup(struct oxygen *chip)
+static void xonar_d1_cleanup(struct oxygen *chip)
 {
 	xonar_cleanup(chip);
 	cs4362a_write(chip, 0x01, CS4362A_PDN | CS4362A_CPEN);
@@ -365,7 +374,7 @@ static void xonar_d2_resume(struct oxygen *chip)
 	xonar_enable_output(chip);
 }
 
-static void xonar_dx_resume(struct oxygen *chip)
+static void xonar_d1_resume(struct oxygen *chip)
 {
 	cs43xx_init(chip);
 	xonar_enable_output(chip);
@@ -513,7 +522,7 @@ static const struct snd_kcontrol_new front_panel_switch = {
 	.put = front_panel_put,
 };
 
-static void xonar_dx_ac97_switch(struct oxygen *chip,
+static void xonar_d1_ac97_switch(struct oxygen *chip,
 				 unsigned int reg, unsigned int mute)
 {
 	if (reg == AC97_LINE) {
@@ -536,7 +545,7 @@ static int xonar_d2_control_filter(struct snd_kcontrol_new *template)
 	return 0;
 }
 
-static int xonar_dx_control_filter(struct snd_kcontrol_new *template)
+static int xonar_d1_control_filter(struct snd_kcontrol_new *template)
 {
 	if (!strncmp(template->name, "CD Capture ", 11))
 		return 1; /* no CD input */
@@ -548,7 +557,7 @@ static int xonar_mixer_init(struct oxygen *chip)
 	return snd_ctl_add(chip->card, snd_ctl_new1(&alt_switch, chip));
 }
 
-static int xonar_dx_mixer_init(struct oxygen *chip)
+static int xonar_d1_mixer_init(struct oxygen *chip)
 {
 	return snd_ctl_add(chip->card, snd_ctl_new1(&front_panel_switch, chip));
 }
@@ -615,23 +624,51 @@ static const struct oxygen_model xonar_models[] = {
 		.dac_i2s_format = OXYGEN_I2S_FORMAT_LJUST,
 		.adc_i2s_format = OXYGEN_I2S_FORMAT_LJUST,
 	},
+	[MODEL_D1] = {
+		.shortname = "Xonar D1",
+		.longname = "Asus Virtuoso 100",
+		.chip = "AV200",
+		.owner = THIS_MODULE,
+		.init = xonar_d1_init,
+		.control_filter = xonar_d1_control_filter,
+		.mixer_init = xonar_d1_mixer_init,
+		.cleanup = xonar_d1_cleanup,
+		.suspend = xonar_d1_cleanup,
+		.resume = xonar_d1_resume,
+		.set_dac_params = set_cs43xx_params,
+		.set_adc_params = set_cs53x1_params,
+		.update_dac_volume = update_cs43xx_volume,
+		.update_dac_mute = update_cs43xx_mute,
+		.ac97_switch = xonar_d1_ac97_switch,
+		.dac_tlv = cs4362a_db_scale,
+		.model_data_size = sizeof(struct xonar_data),
+		.pcm_dev_cfg = PLAYBACK_0_TO_I2S |
+			       PLAYBACK_1_TO_SPDIF |
+			       CAPTURE_0_FROM_I2S_2,
+		.dac_channels = 8,
+		.dac_volume_min = 0,
+		.dac_volume_max = 127,
+		.function_flags = OXYGEN_FUNCTION_2WIRE,
+		.dac_i2s_format = OXYGEN_I2S_FORMAT_LJUST,
+		.adc_i2s_format = OXYGEN_I2S_FORMAT_LJUST,
+	},
 	[MODEL_DX] = {
 		.shortname = "Xonar DX",
 		.longname = "Asus Virtuoso 100",
 		.chip = "AV200",
 		.owner = THIS_MODULE,
 		.init = xonar_dx_init,
-		.control_filter = xonar_dx_control_filter,
-		.mixer_init = xonar_dx_mixer_init,
-		.cleanup = xonar_dx_cleanup,
-		.suspend = xonar_dx_cleanup,
-		.resume = xonar_dx_resume,
+		.control_filter = xonar_d1_control_filter,
+		.mixer_init = xonar_d1_mixer_init,
+		.cleanup = xonar_d1_cleanup,
+		.suspend = xonar_d1_cleanup,
+		.resume = xonar_d1_resume,
 		.set_dac_params = set_cs43xx_params,
 		.set_adc_params = set_cs53x1_params,
 		.update_dac_volume = update_cs43xx_volume,
 		.update_dac_mute = update_cs43xx_mute,
 		.gpio_changed = xonar_gpio_changed,
-		.ac97_switch = xonar_dx_ac97_switch,
+		.ac97_switch = xonar_d1_ac97_switch,
 		.dac_tlv = cs4362a_db_scale,
 		.model_data_size = sizeof(struct xonar_data),
 		.pcm_dev_cfg = PLAYBACK_0_TO_I2S |
diff --git a/sound/sh/aica.c b/sound/sh/aica.c
index 9ca113326143..54df8baf916f 100644
--- a/sound/sh/aica.c
+++ b/sound/sh/aica.c
@@ -42,7 +42,7 @@
 #include <sound/info.h>
 #include <asm/io.h>
 #include <asm/dma.h>
-#include <asm/dreamcast/sysasic.h>
+#include <mach/sysasic.h>
 #include "aica.h"
 
 MODULE_AUTHOR("Adrian McMenamin <adrian@mcmen.demon.co.uk>");
diff --git a/sound/soc/at32/playpaq_wm8510.c b/sound/soc/at32/playpaq_wm8510.c
index fee5f8e58957..3f326219f1ec 100644
--- a/sound/soc/at32/playpaq_wm8510.c
+++ b/sound/soc/at32/playpaq_wm8510.c
@@ -36,8 +36,8 @@
 #include <sound/soc.h>
 #include <sound/soc-dapm.h>
 
-#include <asm/arch/at32ap700x.h>
-#include <asm/arch/portmux.h>
+#include <mach/at32ap700x.h>
+#include <mach/portmux.h>
 
 #include "../codecs/wm8510.h"
 #include "at32-pcm.h"
diff --git a/sound/soc/at91/at91-pcm.c b/sound/soc/at91/at91-pcm.c
index d47492b2b6e5..7ab48bd25e4c 100644
--- a/sound/soc/at91/at91-pcm.c
+++ b/sound/soc/at91/at91-pcm.c
@@ -28,8 +28,8 @@
 #include <sound/pcm_params.h>
 #include <sound/soc.h>
 
-#include <asm/arch/hardware.h>
-#include <asm/arch/at91_ssc.h>
+#include <mach/hardware.h>
+#include <mach/at91_ssc.h>
 
 #include "at91-pcm.h"
 
diff --git a/sound/soc/at91/at91-pcm.h b/sound/soc/at91/at91-pcm.h
index 58d0f00a07b2..e5aada2cb102 100644
--- a/sound/soc/at91/at91-pcm.h
+++ b/sound/soc/at91/at91-pcm.h
@@ -19,7 +19,7 @@
 #ifndef _AT91_PCM_H
 #define _AT91_PCM_H
 
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 
 struct at91_ssc_periph {
 	void __iomem	*base;
diff --git a/sound/soc/at91/at91-ssc.c b/sound/soc/at91/at91-ssc.c
index 090e607f8692..5d44515e62e0 100644
--- a/sound/soc/at91/at91-ssc.c
+++ b/sound/soc/at91/at91-ssc.c
@@ -28,9 +28,9 @@
 #include <sound/initval.h>
 #include <sound/soc.h>
 
-#include <asm/arch/hardware.h>
-#include <asm/arch/at91_pmc.h>
-#include <asm/arch/at91_ssc.h>
+#include <mach/hardware.h>
+#include <mach/at91_pmc.h>
+#include <mach/at91_ssc.h>
 
 #include "at91-pcm.h"
 #include "at91-ssc.h"
diff --git a/sound/soc/at91/eti_b1_wm8731.c b/sound/soc/at91/eti_b1_wm8731.c
index d532de954241..b81d6b2cfa1d 100644
--- a/sound/soc/at91/eti_b1_wm8731.c
+++ b/sound/soc/at91/eti_b1_wm8731.c
@@ -22,7 +22,6 @@
 
 #include <linux/module.h>
 #include <linux/moduleparam.h>
-#include <linux/version.h>
 #include <linux/kernel.h>
 #include <linux/clk.h>
 #include <linux/timer.h>
@@ -33,8 +32,8 @@
 #include <sound/soc.h>
 #include <sound/soc-dapm.h>
 
-#include <asm/hardware.h>
-#include <asm/arch/gpio.h>
+#include <mach/hardware.h>
+#include <mach/gpio.h>
 
 #include "../codecs/wm8731.h"
 #include "at91-pcm.h"
diff --git a/sound/soc/au1x/psc-i2s.c b/sound/soc/au1x/psc-i2s.c
index ba4b5c199f21..9384702c7ebd 100644
--- a/sound/soc/au1x/psc-i2s.c
+++ b/sound/soc/au1x/psc-i2s.c
@@ -231,7 +231,7 @@ static int au1xpsc_i2s_stop(struct au1xpsc_audio_data *pscdata, int stype)
 
 	/* if both TX and RX are idle, disable PSC */
 	stat = au_readl(I2S_STAT(pscdata));
-	if (!(stat & (PSC_I2SSTAT_RB | PSC_I2SSTAT_RB))) {
+	if (!(stat & (PSC_I2SSTAT_TB | PSC_I2SSTAT_RB))) {
 		au_writel(0, I2S_CFG(pscdata));
 		au_sync();
 		au_writel(PSC_CTRL_SUSPEND, PSC_CTRL(pscdata));
diff --git a/sound/soc/codecs/ak4535.c b/sound/soc/codecs/ak4535.c
index b26003c4f3e8..7da9f467b7b8 100644
--- a/sound/soc/codecs/ak4535.c
+++ b/sound/soc/codecs/ak4535.c
@@ -562,10 +562,9 @@ static int ak4535_codec_probe(struct i2c_adapter *adap, int addr, int kind)
 	client_template.addr = addr;
 
 	i2c = kmemdup(&client_template, sizeof(client_template), GFP_KERNEL);
-	if (i2c == NULL) {
-		kfree(codec);
+	if (i2c == NULL)
 		return -ENOMEM;
-	}
+
 	i2c_set_clientdata(i2c, codec);
 	codec->control_data = i2c;
 
@@ -583,7 +582,6 @@ static int ak4535_codec_probe(struct i2c_adapter *adap, int addr, int kind)
 	return ret;
 
 err:
-	kfree(codec);
 	kfree(i2c);
 	return ret;
 }
@@ -660,6 +658,11 @@ static int ak4535_probe(struct platform_device *pdev)
 #else
 	/* Add other interfaces here */
 #endif
+
+	if (ret != 0) {
+		kfree(codec->private_data);
+		kfree(codec);
+	}
 	return ret;
 }
 
diff --git a/sound/soc/codecs/tlv320aic3x.c b/sound/soc/codecs/tlv320aic3x.c
index b1dce5f459db..5f9abb199435 100644
--- a/sound/soc/codecs/tlv320aic3x.c
+++ b/sound/soc/codecs/tlv320aic3x.c
@@ -1199,10 +1199,9 @@ static int aic3x_codec_probe(struct i2c_adapter *adap, int addr, int kind)
 	client_template.addr = addr;
 
 	i2c = kmemdup(&client_template, sizeof(client_template), GFP_KERNEL);
-	if (i2c == NULL) {
-		kfree(codec);
+	if (i2c == NULL)
 		return -ENOMEM;
-	}
+
 	i2c_set_clientdata(i2c, codec);
 	codec->control_data = i2c;
 
@@ -1221,7 +1220,6 @@ static int aic3x_codec_probe(struct i2c_adapter *adap, int addr, int kind)
 	return ret;
 
 err:
-	kfree(codec);
 	kfree(i2c);
 	return ret;
 }
@@ -1302,6 +1300,11 @@ static int aic3x_probe(struct platform_device *pdev)
 #else
 	/* Add other interfaces here */
 #endif
+
+	if (ret != 0) {
+		kfree(codec->private_data);
+		kfree(codec);
+	}
 	return ret;
 }
 
diff --git a/sound/soc/codecs/uda1380.c b/sound/soc/codecs/uda1380.c
index a52d6d9e007a..807318fbdc8f 100644
--- a/sound/soc/codecs/uda1380.c
+++ b/sound/soc/codecs/uda1380.c
@@ -729,10 +729,9 @@ static int uda1380_codec_probe(struct i2c_adapter *adap, int addr, int kind)
 	client_template.addr = addr;
 
 	i2c = kmemdup(&client_template, sizeof(client_template), GFP_KERNEL);
-	if (i2c == NULL) {
-		kfree(codec);
+	if (i2c == NULL)
 		return -ENOMEM;
-	}
+
 	i2c_set_clientdata(i2c, codec);
 	codec->control_data = i2c;
 
@@ -750,7 +749,6 @@ static int uda1380_codec_probe(struct i2c_adapter *adap, int addr, int kind)
 	return ret;
 
 err:
-	kfree(codec);
 	kfree(i2c);
 	return ret;
 }
@@ -817,6 +815,9 @@ static int uda1380_probe(struct platform_device *pdev)
 #else
 	/* Add other interfaces here */
 #endif
+
+	if (ret != 0)
+		kfree(codec);
 	return ret;
 }
 
diff --git a/sound/soc/codecs/wm8510.c b/sound/soc/codecs/wm8510.c
index 67325fd95447..3d998e6a997e 100644
--- a/sound/soc/codecs/wm8510.c
+++ b/sound/soc/codecs/wm8510.c
@@ -693,10 +693,9 @@ static int wm8510_codec_probe(struct i2c_adapter *adap, int addr, int kind)
 	client_template.addr = addr;
 
 	i2c = kmemdup(&client_template, sizeof(client_template), GFP_KERNEL);
-	if (i2c == NULL) {
-		kfree(codec);
+	if (i2c == NULL)
 		return -ENOMEM;
-	}
+
 	i2c_set_clientdata(i2c, codec);
 	codec->control_data = i2c;
 
@@ -714,7 +713,6 @@ static int wm8510_codec_probe(struct i2c_adapter *adap, int addr, int kind)
 	return ret;
 
 err:
-	kfree(codec);
 	kfree(i2c);
 	return ret;
 }
@@ -782,6 +780,9 @@ static int wm8510_probe(struct platform_device *pdev)
 #else
 	/* Add other interfaces here */
 #endif
+
+	if (ret != 0)
+		kfree(codec);
 	return ret;
 }
 
diff --git a/sound/soc/codecs/wm8731.c b/sound/soc/codecs/wm8731.c
index 369d39c3f745..9402fcaf04fa 100644
--- a/sound/soc/codecs/wm8731.c
+++ b/sound/soc/codecs/wm8731.c
@@ -596,10 +596,9 @@ static int wm8731_codec_probe(struct i2c_adapter *adap, int addr, int kind)
 	client_template.addr = addr;
 
 	i2c = kmemdup(&client_template, sizeof(client_template), GFP_KERNEL);
-	if (i2c == NULL) {
-		kfree(codec);
+	if (i2c == NULL)
 		return -ENOMEM;
-	}
+
 	i2c_set_clientdata(i2c, codec);
 	codec->control_data = i2c;
 
@@ -617,7 +616,6 @@ static int wm8731_codec_probe(struct i2c_adapter *adap, int addr, int kind)
 	return ret;
 
 err:
-	kfree(codec);
 	kfree(i2c);
 	return ret;
 }
@@ -693,6 +691,11 @@ static int wm8731_probe(struct platform_device *pdev)
 #else
 	/* Add other interfaces here */
 #endif
+
+	if (ret != 0) {
+		kfree(codec->private_data);
+		kfree(codec);
+	}
 	return ret;
 }
 
diff --git a/sound/soc/codecs/wm8750.c b/sound/soc/codecs/wm8750.c
index e23cb09f0d14..dd1f55404b29 100644
--- a/sound/soc/codecs/wm8750.c
+++ b/sound/soc/codecs/wm8750.c
@@ -348,8 +348,9 @@ static const struct snd_soc_dapm_widget wm8750_dapm_widgets[] = {
 	SND_SOC_DAPM_OUTPUT("ROUT1"),
 	SND_SOC_DAPM_OUTPUT("LOUT2"),
 	SND_SOC_DAPM_OUTPUT("ROUT2"),
-	SND_SOC_DAPM_OUTPUT("MONO"),
+	SND_SOC_DAPM_OUTPUT("MONO1"),
 	SND_SOC_DAPM_OUTPUT("OUT3"),
+	SND_SOC_DAPM_OUTPUT("VREF"),
 
 	SND_SOC_DAPM_INPUT("LINPUT1"),
 	SND_SOC_DAPM_INPUT("LINPUT2"),
@@ -868,10 +869,9 @@ static int wm8750_codec_probe(struct i2c_adapter *adap, int addr, int kind)
 	client_template.addr = addr;
 
 	i2c = kmemdup(&client_template, sizeof(client_template), GFP_KERNEL);
-	if (i2c == NULL) {
-		kfree(codec);
+	if (i2c == NULL)
 		return -ENOMEM;
-	}
+
 	i2c_set_clientdata(i2c, codec);
 	codec->control_data = i2c;
 
@@ -889,7 +889,6 @@ static int wm8750_codec_probe(struct i2c_adapter *adap, int addr, int kind)
 	return ret;
 
 err:
-	kfree(codec);
 	kfree(i2c);
 	return ret;
 }
@@ -965,6 +964,10 @@ static int wm8750_probe(struct platform_device *pdev)
 		/* Add other interfaces here */
 #endif
 
+	if (ret != 0) {
+		kfree(codec->private_data);
+		kfree(codec);
+	}
 	return ret;
 }
 
diff --git a/sound/soc/codecs/wm8753.c b/sound/soc/codecs/wm8753.c
index 8604809f0c36..5761164fe16d 100644
--- a/sound/soc/codecs/wm8753.c
+++ b/sound/soc/codecs/wm8753.c
@@ -34,7 +34,6 @@
 
 #include <linux/module.h>
 #include <linux/moduleparam.h>
-#include <linux/version.h>
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/delay.h>
@@ -1661,10 +1660,9 @@ static int wm8753_codec_probe(struct i2c_adapter *adap, int addr, int kind)
 	client_template.addr = addr;
 
 	i2c =  kmemdup(&client_template, sizeof(client_template), GFP_KERNEL);
-	if (!i2c) {
-		kfree(codec);
+	if (!i2c)
 		return -ENOMEM;
-	}
+
 	i2c_set_clientdata(i2c, codec);
 	codec->control_data = i2c;
 
@@ -1683,7 +1681,6 @@ static int wm8753_codec_probe(struct i2c_adapter *adap, int addr, int kind)
 	return ret;
 
 err:
-	kfree(codec);
 	kfree(i2c);
 	return ret;
 }
@@ -1760,6 +1757,11 @@ static int wm8753_probe(struct platform_device *pdev)
 #else
 		/* Add other interfaces here */
 #endif
+
+	if (ret != 0) {
+		kfree(codec->private_data);
+		kfree(codec);
+	}
 	return ret;
 }
 
diff --git a/sound/soc/codecs/wm8990.c b/sound/soc/codecs/wm8990.c
index 3ecce5168e94..dd995ef448b4 100644
--- a/sound/soc/codecs/wm8990.c
+++ b/sound/soc/codecs/wm8990.c
@@ -82,7 +82,7 @@ static const u16 wm8990_reg[] = {
 	0x0003,     /* R35 - ClassD1 */
 	0x0000,     /* R36 */
 	0x0100,     /* R37 - ClassD3 */
-	0x0000,     /* R38 */
+	0x0079,     /* R38 - ClassD4 */
 	0x0000,     /* R39 - Input Mixer1 */
 	0x0000,     /* R40 - Input Mixer2 */
 	0x0000,     /* R41 - Input Mixer3 */
@@ -311,11 +311,15 @@ SOC_SINGLE("Speaker Mode Switch", WM8990_CLASSD1,
 	WM8990_CDMODE_BIT, 1, 0),
 
 SOC_SINGLE("Speaker Output Attenuation Volume", WM8990_SPEAKER_VOLUME,
-	WM8990_SPKVOL_SHIFT, WM8990_SPKVOL_MASK, 0),
+	WM8990_SPKATTN_SHIFT, WM8990_SPKATTN_MASK, 0),
 SOC_SINGLE("Speaker DC Boost Volume", WM8990_CLASSD3,
 	WM8990_DCGAIN_SHIFT, WM8990_DCGAIN_MASK, 0),
 SOC_SINGLE("Speaker AC Boost Volume", WM8990_CLASSD3,
 	WM8990_ACGAIN_SHIFT, WM8990_ACGAIN_MASK, 0),
+SOC_SINGLE_TLV("Speaker Volume", WM8990_CLASSD4,
+	WM8990_SPKVOL_SHIFT, WM8990_SPKVOL_MASK, 0, out_pga_tlv),
+SOC_SINGLE("Speaker ZC Switch", WM8990_CLASSD4,
+	WM8990_SPKZC_SHIFT, WM8990_SPKZC_MASK, 0),
 
 SOC_WM899X_OUTPGA_SINGLE_R_TLV("Left DAC Digital Volume",
 	WM8990_LEFT_DAC_DIGITAL_VOLUME,
@@ -920,7 +924,7 @@ static const struct snd_soc_dapm_route audio_map[] = {
 	{"SPKMIX", "SPKMIX Left Mixer PGA Switch", "LOPGA"},
 	{"SPKMIX", "SPKMIX Right Mixer PGA Switch", "ROPGA"},
 	{"SPKMIX", "SPKMIX Right DAC Switch", "Right DAC"},
-	{"SPKMIX", "SPKMIX Left DAC Switch", "Right DAC"},
+	{"SPKMIX", "SPKMIX Left DAC Switch", "Left DAC"},
 
 	/* LONMIX */
 	{"LONMIX", "LONMIX Left Mixer PGA Switch", "LOPGA"},
@@ -1496,10 +1500,9 @@ static int wm8990_codec_probe(struct i2c_adapter *adap, int addr, int kind)
 	client_template.addr = addr;
 
 	i2c =  kmemdup(&client_template, sizeof(client_template), GFP_KERNEL);
-	if (i2c == NULL) {
-		kfree(codec);
+	if (i2c == NULL)
 		return -ENOMEM;
-	}
+
 	i2c_set_clientdata(i2c, codec);
 	codec->control_data = i2c;
 
@@ -1517,7 +1520,6 @@ static int wm8990_codec_probe(struct i2c_adapter *adap, int addr, int kind)
 	return ret;
 
 err:
-	kfree(codec);
 	kfree(i2c);
 	return ret;
 }
@@ -1591,6 +1593,11 @@ static int wm8990_probe(struct platform_device *pdev)
 #else
 		/* Add other interfaces here */
 #endif
+
+	if (ret != 0) {
+		kfree(codec->private_data);
+		kfree(codec);
+	}
 	return ret;
 }
 
diff --git a/sound/soc/codecs/wm8990.h b/sound/soc/codecs/wm8990.h
index 6bea57485283..0a08325d5443 100644
--- a/sound/soc/codecs/wm8990.h
+++ b/sound/soc/codecs/wm8990.h
@@ -54,6 +54,7 @@
 #define WM8990_SPEAKER_VOLUME                   0x22
 #define WM8990_CLASSD1                          0x23
 #define WM8990_CLASSD3                          0x25
+#define WM8990_CLASSD4                          0x26
 #define WM8990_INPUT_MIXER1                     0x27
 #define WM8990_INPUT_MIXER2                     0x28
 #define WM8990_INPUT_MIXER3                     0x29
@@ -528,8 +529,8 @@
 /*
  * R34 (0x22) - Speaker Volume
  */
-#define WM8990_SPKVOL_MASK                      0x0003  /* SPKVOL - [1:0] */
-#define WM8990_SPKVOL_SHIFT			0
+#define WM8990_SPKATTN_MASK                      0x0003  /* SPKATTN - [1:0] */
+#define WM8990_SPKATTN_SHIFT			 0
 
 /*
  * R35 (0x23) - ClassD1
@@ -544,6 +545,15 @@
 #define WM8990_DCGAIN_SHIFT			3
 #define WM8990_ACGAIN_MASK                      0x0007  /* ACGAIN - [2:0] */
 #define WM8990_ACGAIN_SHIFT			0
+
+/*
+ * R38 (0x26) - ClassD4
+ */
+#define WM8990_SPKZC_MASK                       0x0001  /* SPKZC */
+#define WM8990_SPKZC_SHIFT                           7  /* SPKZC */
+#define WM8990_SPKVOL_MASK                      0x007F  /* SPKVOL - [6:0] */
+#define WM8990_SPKVOL_SHIFT                          0  /* SPKVOL - [6:0] */
+
 /*
  * R39 (0x27) - Input Mixer1
  */
diff --git a/sound/soc/codecs/wm9712.c b/sound/soc/codecs/wm9712.c
index 9fc8edd82225..2f1c91b1d556 100644
--- a/sound/soc/codecs/wm9712.c
+++ b/sound/soc/codecs/wm9712.c
@@ -13,7 +13,6 @@
 
 #include <linux/init.h>
 #include <linux/module.h>
-#include <linux/version.h>
 #include <linux/kernel.h>
 #include <linux/device.h>
 #include <sound/core.h>
@@ -427,20 +426,20 @@ static const struct snd_soc_dapm_route audio_map[] = {
 	{"HPOUTR", NULL, "Headphone PGA"},
 	{"Headphone PGA", NULL, "Right HP Mixer"},
 
-	/* mono hp mixer */
-	{"Mono HP Mixer", NULL, "Left HP Mixer"},
-	{"Mono HP Mixer", NULL, "Right HP Mixer"},
+	/* mono mixer */
+	{"Mono Mixer", NULL, "Left HP Mixer"},
+	{"Mono Mixer", NULL, "Right HP Mixer"},
 
 	/* Out3 Mux */
 	{"Out3 Mux", "Left", "Left HP Mixer"},
 	{"Out3 Mux", "Mono", "Phone Mixer"},
-	{"Out3 Mux", "Left + Right", "Mono HP Mixer"},
+	{"Out3 Mux", "Left + Right", "Mono Mixer"},
 	{"Out 3 PGA", NULL, "Out3 Mux"},
 	{"OUT3", NULL, "Out 3 PGA"},
 
 	/* speaker Mux */
 	{"Speaker Mux", "Speaker Mix", "Speaker Mixer"},
-	{"Speaker Mux", "Headphone Mix", "Mono HP Mixer"},
+	{"Speaker Mux", "Headphone Mix", "Mono Mixer"},
 	{"Speaker PGA", NULL, "Speaker Mux"},
 	{"LOUT2", NULL, "Speaker PGA"},
 	{"ROUT2", NULL, "Speaker PGA"},
diff --git a/sound/soc/davinci/davinci-evm.c b/sound/soc/davinci/davinci-evm.c
index 5e2c306399ed..65fdbd81a379 100644
--- a/sound/soc/davinci/davinci-evm.c
+++ b/sound/soc/davinci/davinci-evm.c
@@ -19,9 +19,8 @@
 #include <sound/soc.h>
 #include <sound/soc-dapm.h>
 
-#include <asm/mach-types.h>
 #include <asm/dma.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 
 #include "../codecs/tlv320aic3x.h"
 #include "davinci-pcm.h"
diff --git a/sound/soc/fsl/fsl_dma.c b/sound/soc/fsl/fsl_dma.c
index da2bc5902864..d2d3da9729f2 100644
--- a/sound/soc/fsl/fsl_dma.c
+++ b/sound/soc/fsl/fsl_dma.c
@@ -132,12 +132,17 @@ struct fsl_dma_private {
  * Since each link descriptor has a 32-bit byte count field, we set
  * period_bytes_max to the largest 32-bit number.  We also have no maximum
  * number of periods.
+ *
+ * Note that we specify SNDRV_PCM_INFO_JOINT_DUPLEX here, but only because a
+ * limitation in the SSI driver requires the sample rates for playback and
+ * capture to be the same.
  */
 static const struct snd_pcm_hardware fsl_dma_hardware = {
 
 	.info   		= SNDRV_PCM_INFO_INTERLEAVED |
 				  SNDRV_PCM_INFO_MMAP |
-				  SNDRV_PCM_INFO_MMAP_VALID,
+				  SNDRV_PCM_INFO_MMAP_VALID |
+				  SNDRV_PCM_INFO_JOINT_DUPLEX,
 	.formats		= FSLDMA_PCM_FORMATS,
 	.rates  		= FSLDMA_PCM_RATES,
 	.rate_min       	= 5512,
@@ -322,14 +327,75 @@ static int fsl_dma_new(struct snd_card *card, struct snd_soc_dai *dai,
  * fsl_dma_open: open a new substream.
  *
  * Each substream has its own DMA buffer.
+ *
+ * ALSA divides the DMA buffer into N periods.  We create NUM_DMA_LINKS link
+ * descriptors that ping-pong from one period to the next.  For example, if
+ * there are six periods and two link descriptors, this is how they look
+ * before playback starts:
+ *
+ *      	   The last link descriptor
+ *   ____________  points back to the first
+ *  |   	 |
+ *  V   	 |
+ *  ___    ___   |
+ * |   |->|   |->|
+ * |___|  |___|
+ *   |      |
+ *   |      |
+ *   V      V
+ *  _________________________________________
+ * |      |      |      |      |      |      |  The DMA buffer is
+ * |      |      |      |      |      |      |    divided into 6 parts
+ * |______|______|______|______|______|______|
+ *
+ * and here's how they look after the first period is finished playing:
+ *
+ *   ____________
+ *  |   	 |
+ *  V   	 |
+ *  ___    ___   |
+ * |   |->|   |->|
+ * |___|  |___|
+ *   |      |
+ *   |______________
+ *          |       |
+ *          V       V
+ *  _________________________________________
+ * |      |      |      |      |      |      |
+ * |      |      |      |      |      |      |
+ * |______|______|______|______|______|______|
+ *
+ * The first link descriptor now points to the third period.  The DMA
+ * controller is currently playing the second period.  When it finishes, it
+ * will jump back to the first descriptor and play the third period.
+ *
+ * There are four reasons we do this:
+ *
+ * 1. The only way to get the DMA controller to automatically restart the
+ *    transfer when it gets to the end of the buffer is to use chaining
+ *    mode.  Basic direct mode doesn't offer that feature.
+ * 2. We need to receive an interrupt at the end of every period.  The DMA
+ *    controller can generate an interrupt at the end of every link transfer
+ *    (aka segment).  Making each period into a DMA segment will give us the
+ *    interrupts we need.
+ * 3. By creating only two link descriptors, regardless of the number of
+ *    periods, we do not need to reallocate the link descriptors if the
+ *    number of periods changes.
+ * 4. All of the audio data is still stored in a single, contiguous DMA
+ *    buffer, which is what ALSA expects.  We're just dividing it into
+ *    contiguous parts, and creating a link descriptor for each one.
  */
 static int fsl_dma_open(struct snd_pcm_substream *substream)
 {
 	struct snd_pcm_runtime *runtime = substream->runtime;
 	struct fsl_dma_private *dma_private;
+	struct ccsr_dma_channel __iomem *dma_channel;
 	dma_addr_t ld_buf_phys;
+	u64 temp_link;  	/* Pointer to next link descriptor */
+	u32 mr;
 	unsigned int channel;
 	int ret = 0;
+	unsigned int i;
 
 	/*
 	 * Reject any DMA buffer whose size is not a multiple of the period
@@ -390,68 +456,74 @@ static int fsl_dma_open(struct snd_pcm_substream *substream)
 	snd_soc_set_runtime_hwparams(substream, &fsl_dma_hardware);
 	runtime->private_data = dma_private;
 
+	/* Program the fixed DMA controller parameters */
+
+	dma_channel = dma_private->dma_channel;
+
+	temp_link = dma_private->ld_buf_phys +
+		sizeof(struct fsl_dma_link_descriptor);
+
+	for (i = 0; i < NUM_DMA_LINKS; i++) {
+		struct fsl_dma_link_descriptor *link = &dma_private->link[i];
+
+		link->source_attr = cpu_to_be32(CCSR_DMA_ATR_SNOOP);
+		link->dest_attr = cpu_to_be32(CCSR_DMA_ATR_SNOOP);
+		link->next = cpu_to_be64(temp_link);
+
+		temp_link += sizeof(struct fsl_dma_link_descriptor);
+	}
+	/* The last link descriptor points to the first */
+	dma_private->link[i - 1].next = cpu_to_be64(dma_private->ld_buf_phys);
+
+	/* Tell the DMA controller where the first link descriptor is */
+	out_be32(&dma_channel->clndar,
+		CCSR_DMA_CLNDAR_ADDR(dma_private->ld_buf_phys));
+	out_be32(&dma_channel->eclndar,
+		CCSR_DMA_ECLNDAR_ADDR(dma_private->ld_buf_phys));
+
+	/* The manual says the BCR must be clear before enabling EMP */
+	out_be32(&dma_channel->bcr, 0);
+
+	/*
+	 * Program the mode register for interrupts, external master control,
+	 * and source/destination hold.  Also clear the Channel Abort bit.
+	 */
+	mr = in_be32(&dma_channel->mr) &
+		~(CCSR_DMA_MR_CA | CCSR_DMA_MR_DAHE | CCSR_DMA_MR_SAHE);
+
+	/*
+	 * We want External Master Start and External Master Pause enabled,
+	 * because the SSI is controlling the DMA controller.  We want the DMA
+	 * controller to be set up in advance, and then we signal only the SSI
+	 * to start transferring.
+	 *
+	 * We want End-Of-Segment Interrupts enabled, because this will generate
+	 * an interrupt at the end of each segment (each link descriptor
+	 * represents one segment).  Each DMA segment is the same thing as an
+	 * ALSA period, so this is how we get an interrupt at the end of every
+	 * period.
+	 *
+	 * We want Error Interrupt enabled, so that we can get an error if
+	 * the DMA controller is mis-programmed somehow.
+	 */
+	mr |= CCSR_DMA_MR_EOSIE | CCSR_DMA_MR_EIE | CCSR_DMA_MR_EMP_EN |
+		CCSR_DMA_MR_EMS_EN;
+
+	/* For playback, we want the destination address to be held.  For
+	   capture, set the source address to be held. */
+	mr |= (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) ?
+		CCSR_DMA_MR_DAHE : CCSR_DMA_MR_SAHE;
+
+	out_be32(&dma_channel->mr, mr);
+
 	return 0;
 }
 
 /**
- * fsl_dma_hw_params: allocate the DMA buffer and the DMA link descriptors.
+ * fsl_dma_hw_params: continue initializing the DMA links
  *
- * ALSA divides the DMA buffer into N periods.  We create NUM_DMA_LINKS link
- * descriptors that ping-pong from one period to the next.  For example, if
- * there are six periods and two link descriptors, this is how they look
- * before playback starts:
- *
- *      	   The last link descriptor
- *   ____________  points back to the first
- *  |   	 |
- *  V   	 |
- *  ___    ___   |
- * |   |->|   |->|
- * |___|  |___|
- *   |      |
- *   |      |
- *   V      V
- *  _________________________________________
- * |      |      |      |      |      |      |  The DMA buffer is
- * |      |      |      |      |      |      |    divided into 6 parts
- * |______|______|______|______|______|______|
- *
- * and here's how they look after the first period is finished playing:
- *
- *   ____________
- *  |   	 |
- *  V   	 |
- *  ___    ___   |
- * |   |->|   |->|
- * |___|  |___|
- *   |      |
- *   |______________
- *          |       |
- *          V       V
- *  _________________________________________
- * |      |      |      |      |      |      |
- * |      |      |      |      |      |      |
- * |______|______|______|______|______|______|
- *
- * The first link descriptor now points to the third period.  The DMA
- * controller is currently playing the second period.  When it finishes, it
- * will jump back to the first descriptor and play the third period.
- *
- * There are four reasons we do this:
- *
- * 1. The only way to get the DMA controller to automatically restart the
- *    transfer when it gets to the end of the buffer is to use chaining
- *    mode.  Basic direct mode doesn't offer that feature.
- * 2. We need to receive an interrupt at the end of every period.  The DMA
- *    controller can generate an interrupt at the end of every link transfer
- *    (aka segment).  Making each period into a DMA segment will give us the
- *    interrupts we need.
- * 3. By creating only two link descriptors, regardless of the number of
- *    periods, we do not need to reallocate the link descriptors if the
- *    number of periods changes.
- * 4. All of the audio data is still stored in a single, contiguous DMA
- *    buffer, which is what ALSA expects.  We're just dividing it into
- *    contiguous parts, and creating a link descriptor for each one.
+ * This function obtains hardware parameters about the opened stream and
+ * programs the DMA controller accordingly.
  *
  * Note that due to a quirk of the SSI's STX register, the target address
  * for the DMA operations depends on the sample size.  So we don't program
@@ -463,11 +535,8 @@ static int fsl_dma_hw_params(struct snd_pcm_substream *substream,
 {
 	struct snd_pcm_runtime *runtime = substream->runtime;
 	struct fsl_dma_private *dma_private = runtime->private_data;
-	struct ccsr_dma_channel __iomem *dma_channel = dma_private->dma_channel;
 
 	dma_addr_t temp_addr;   /* Pointer to next period */
-	u64 temp_link;  	/* Pointer to next link descriptor */
-	u32 mr; 		/* Temporary variable for MR register */
 
 	unsigned int i;
 
@@ -485,8 +554,6 @@ static int fsl_dma_hw_params(struct snd_pcm_substream *substream,
 		dma_private->dma_buf_next = dma_private->dma_buf_phys;
 
 	/*
-	 * Initialize each link descriptor.
-	 *
 	 * The actual address in STX0 (destination for playback, source for
 	 * capture) is based on the sample size, but we don't know the sample
 	 * size in this function, so we'll have to adjust that later.  See
@@ -502,16 +569,11 @@ static int fsl_dma_hw_params(struct snd_pcm_substream *substream,
 	 * buffer itself.
 	 */
 	temp_addr = substream->dma_buffer.addr;
-	temp_link = dma_private->ld_buf_phys +
-		sizeof(struct fsl_dma_link_descriptor);
 
 	for (i = 0; i < NUM_DMA_LINKS; i++) {
 		struct fsl_dma_link_descriptor *link = &dma_private->link[i];
 
 		link->count = cpu_to_be32(period_size);
-		link->source_attr = cpu_to_be32(CCSR_DMA_ATR_SNOOP);
-		link->dest_attr = cpu_to_be32(CCSR_DMA_ATR_SNOOP);
-		link->next = cpu_to_be64(temp_link);
 
 		if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
 			link->source_addr = cpu_to_be32(temp_addr);
@@ -519,51 +581,7 @@ static int fsl_dma_hw_params(struct snd_pcm_substream *substream,
 			link->dest_addr = cpu_to_be32(temp_addr);
 
 		temp_addr += period_size;
-		temp_link += sizeof(struct fsl_dma_link_descriptor);
 	}
-	/* The last link descriptor points to the first */
-	dma_private->link[i - 1].next = cpu_to_be64(dma_private->ld_buf_phys);
-
-	/* Tell the DMA controller where the first link descriptor is */
-	out_be32(&dma_channel->clndar,
-		CCSR_DMA_CLNDAR_ADDR(dma_private->ld_buf_phys));
-	out_be32(&dma_channel->eclndar,
-		CCSR_DMA_ECLNDAR_ADDR(dma_private->ld_buf_phys));
-
-	/* The manual says the BCR must be clear before enabling EMP */
-	out_be32(&dma_channel->bcr, 0);
-
-	/*
-	 * Program the mode register for interrupts, external master control,
-	 * and source/destination hold.  Also clear the Channel Abort bit.
-	 */
-	mr = in_be32(&dma_channel->mr) &
-		~(CCSR_DMA_MR_CA | CCSR_DMA_MR_DAHE | CCSR_DMA_MR_SAHE);
-
-	/*
-	 * We want External Master Start and External Master Pause enabled,
-	 * because the SSI is controlling the DMA controller.  We want the DMA
-	 * controller to be set up in advance, and then we signal only the SSI
-	 * to start transfering.
-	 *
-	 * We want End-Of-Segment Interrupts enabled, because this will generate
-	 * an interrupt at the end of each segment (each link descriptor
-	 * represents one segment).  Each DMA segment is the same thing as an
-	 * ALSA period, so this is how we get an interrupt at the end of every
-	 * period.
-	 *
-	 * We want Error Interrupt enabled, so that we can get an error if
-	 * the DMA controller is mis-programmed somehow.
-	 */
-	mr |= CCSR_DMA_MR_EOSIE | CCSR_DMA_MR_EIE | CCSR_DMA_MR_EMP_EN |
-		CCSR_DMA_MR_EMS_EN;
-
-	/* For playback, we want the destination address to be held.  For
-	   capture, set the source address to be held. */
-	mr |= (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) ?
-		CCSR_DMA_MR_DAHE : CCSR_DMA_MR_SAHE;
-
-	out_be32(&dma_channel->mr, mr);
 
 	return 0;
 }
diff --git a/sound/soc/fsl/fsl_ssi.c b/sound/soc/fsl/fsl_ssi.c
index 71bff33f5528..157a7895ffa1 100644
--- a/sound/soc/fsl/fsl_ssi.c
+++ b/sound/soc/fsl/fsl_ssi.c
@@ -67,6 +67,8 @@
  * @ssi: pointer to the SSI's registers
  * @ssi_phys: physical address of the SSI registers
  * @irq: IRQ of this SSI
+ * @first_stream: pointer to the stream that was opened first
+ * @second_stream: pointer to second stream
  * @dev: struct device pointer
  * @playback: the number of playback streams opened
  * @capture: the number of capture streams opened
@@ -79,6 +81,8 @@ struct fsl_ssi_private {
 	struct ccsr_ssi __iomem *ssi;
 	dma_addr_t ssi_phys;
 	unsigned int irq;
+	struct snd_pcm_substream *first_stream;
+	struct snd_pcm_substream *second_stream;
 	struct device *dev;
 	unsigned int playback;
 	unsigned int capture;
@@ -342,6 +346,49 @@ static int fsl_ssi_startup(struct snd_pcm_substream *substream)
 		 */
 	}
 
+	if (!ssi_private->first_stream)
+		ssi_private->first_stream = substream;
+	else {
+		/* This is the second stream open, so we need to impose sample
+		 * rate and maybe sample size constraints.  Note that this can
+		 * cause a race condition if the second stream is opened before
+		 * the first stream is fully initialized.
+		 *
+		 * We provide some protection by checking to make sure the first
+		 * stream is initialized, but it's not perfect.  ALSA sometimes
+		 * re-initializes the driver with a different sample rate or
+		 * size.  If the second stream is opened before the first stream
+		 * has received its final parameters, then the second stream may
+		 * be constrained to the wrong sample rate or size.
+		 *
+		 * FIXME: This code does not handle opening and closing streams
+		 * repeatedly.  If you open two streams and then close the first
+		 * one, you may not be able to open another stream until you
+		 * close the second one as well.
+		 */
+		struct snd_pcm_runtime *first_runtime =
+			ssi_private->first_stream->runtime;
+
+		if (!first_runtime->rate || !first_runtime->sample_bits) {
+			dev_err(substream->pcm->card->dev,
+				"set sample rate and size in %s stream first\n",
+				substream->stream == SNDRV_PCM_STREAM_PLAYBACK
+				? "capture" : "playback");
+			return -EAGAIN;
+		}
+
+		snd_pcm_hw_constraint_minmax(substream->runtime,
+			SNDRV_PCM_HW_PARAM_RATE,
+			first_runtime->rate, first_runtime->rate);
+
+		snd_pcm_hw_constraint_minmax(substream->runtime,
+			SNDRV_PCM_HW_PARAM_SAMPLE_BITS,
+			first_runtime->sample_bits,
+			first_runtime->sample_bits);
+
+		ssi_private->second_stream = substream;
+	}
+
 	if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
 		ssi_private->playback++;
 
@@ -371,18 +418,16 @@ static int fsl_ssi_prepare(struct snd_pcm_substream *substream)
 	struct fsl_ssi_private *ssi_private = rtd->dai->cpu_dai->private_data;
 
 	struct ccsr_ssi __iomem *ssi = ssi_private->ssi;
-	u32 wl;
 
-	wl = CCSR_SSI_SxCCR_WL(snd_pcm_format_width(runtime->format));
+	if (substream == ssi_private->first_stream) {
+		u32 wl;
 
-	clrbits32(&ssi->scr, CCSR_SSI_SCR_SSIEN);
+		/* The SSI should always be disabled at this points (SSIEN=0) */
+		wl = CCSR_SSI_SxCCR_WL(snd_pcm_format_width(runtime->format));
 
-	if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
+		/* In synchronous mode, the SSI uses STCCR for capture */
 		clrsetbits_be32(&ssi->stccr, CCSR_SSI_SxCCR_WL_MASK, wl);
-	else
-		clrsetbits_be32(&ssi->srccr, CCSR_SSI_SxCCR_WL_MASK, wl);
-
-	setbits32(&ssi->scr, CCSR_SSI_SCR_SSIEN);
+	}
 
 	return 0;
 }
@@ -407,9 +452,13 @@ static int fsl_ssi_trigger(struct snd_pcm_substream *substream, int cmd)
 	case SNDRV_PCM_TRIGGER_RESUME:
 	case SNDRV_PCM_TRIGGER_PAUSE_RELEASE:
 		if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) {
-			setbits32(&ssi->scr, CCSR_SSI_SCR_TE);
+			clrbits32(&ssi->scr, CCSR_SSI_SCR_SSIEN);
+			setbits32(&ssi->scr,
+				CCSR_SSI_SCR_SSIEN | CCSR_SSI_SCR_TE);
 		} else {
-			setbits32(&ssi->scr, CCSR_SSI_SCR_RE);
+			clrbits32(&ssi->scr, CCSR_SSI_SCR_SSIEN);
+			setbits32(&ssi->scr,
+				CCSR_SSI_SCR_SSIEN | CCSR_SSI_SCR_RE);
 
 			/*
 			 * I think we need this delay to allow time for the SSI
@@ -452,6 +501,11 @@ static void fsl_ssi_shutdown(struct snd_pcm_substream *substream)
 	if (substream->stream == SNDRV_PCM_STREAM_CAPTURE)
 		ssi_private->capture--;
 
+	if (ssi_private->first_stream == substream)
+		ssi_private->first_stream = ssi_private->second_stream;
+
+	ssi_private->second_stream = NULL;
+
 	/*
 	 * If this is the last active substream, disable the SSI and release
 	 * the IRQ.
diff --git a/sound/soc/omap/n810.c b/sound/soc/omap/n810.c
index 02cec96859b8..87d0ed01f65a 100644
--- a/sound/soc/omap/n810.c
+++ b/sound/soc/omap/n810.c
@@ -29,9 +29,9 @@
 #include <sound/soc-dapm.h>
 
 #include <asm/mach-types.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <linux/gpio.h>
-#include <asm/arch/mcbsp.h>
+#include <mach/mcbsp.h>
 
 #include "omap-mcbsp.h"
 #include "omap-pcm.h"
@@ -329,12 +329,14 @@ static int __init n810_soc_init(void)
 	sys_clkout2_src = clk_get(dev, "sys_clkout2_src");
 	if (IS_ERR(sys_clkout2_src)) {
 		dev_err(dev, "Could not get sys_clkout2_src clock\n");
-		return -ENODEV;
+		err = PTR_ERR(sys_clkout2_src);
+		goto err2;
 	}
 	sys_clkout2 = clk_get(dev, "sys_clkout2");
 	if (IS_ERR(sys_clkout2)) {
 		dev_err(dev, "Could not get sys_clkout2\n");
-		goto err1;
+		err = PTR_ERR(sys_clkout2);
+		goto err3;
 	}
 	/*
 	 * Configure 12 MHz output on SYS_CLKOUT2. Therefore we must use
@@ -343,7 +345,8 @@ static int __init n810_soc_init(void)
 	func96m_clk = clk_get(dev, "func_96m_ck");
 	if (IS_ERR(func96m_clk)) {
 		dev_err(dev, "Could not get func 96M clock\n");
-		goto err2;
+		err = PTR_ERR(func96m_clk);
+		goto err4;
 	}
 	clk_set_parent(sys_clkout2_src, func96m_clk);
 	clk_set_rate(sys_clkout2, 12000000);
@@ -356,20 +359,25 @@ static int __init n810_soc_init(void)
 	gpio_direction_output(N810_SPEAKER_AMP_GPIO, 0);
 
 	return 0;
-err2:
+err4:
 	clk_put(sys_clkout2);
+err3:
+	clk_put(sys_clkout2_src);
+err2:
 	platform_device_del(n810_snd_device);
 err1:
 	platform_device_put(n810_snd_device);
 
 	return err;
-
 }
 
 static void __exit n810_soc_exit(void)
 {
 	gpio_free(N810_SPEAKER_AMP_GPIO);
 	gpio_free(N810_HEADSET_AMP_GPIO);
+	clk_put(sys_clkout2_src);
+	clk_put(sys_clkout2);
+	clk_put(func96m_clk);
 
 	platform_device_unregister(n810_snd_device);
 }
diff --git a/sound/soc/omap/omap-mcbsp.c b/sound/soc/omap/omap-mcbsp.c
index 00b0c9d73cd4..35310e16d7f3 100644
--- a/sound/soc/omap/omap-mcbsp.c
+++ b/sound/soc/omap/omap-mcbsp.c
@@ -30,9 +30,9 @@
 #include <sound/initval.h>
 #include <sound/soc.h>
 
-#include <asm/arch/control.h>
-#include <asm/arch/dma.h>
-#include <asm/arch/mcbsp.h>
+#include <mach/control.h>
+#include <mach/dma.h>
+#include <mach/mcbsp.h>
 #include "omap-mcbsp.h"
 #include "omap-pcm.h"
 
diff --git a/sound/soc/omap/omap-pcm.c b/sound/soc/omap/omap-pcm.c
index e092f3d836d0..690bfeaec4a0 100644
--- a/sound/soc/omap/omap-pcm.c
+++ b/sound/soc/omap/omap-pcm.c
@@ -27,7 +27,7 @@
 #include <sound/pcm_params.h>
 #include <sound/soc.h>
 
-#include <asm/arch/dma.h>
+#include <mach/dma.h>
 #include "omap-pcm.h"
 
 static const struct snd_pcm_hardware omap_pcm_hardware = {
diff --git a/sound/soc/pxa/corgi.c b/sound/soc/pxa/corgi.c
index c0294464a23a..0a53f72077fd 100644
--- a/sound/soc/pxa/corgi.c
+++ b/sound/soc/pxa/corgi.c
@@ -25,10 +25,10 @@
 
 #include <asm/mach-types.h>
 #include <asm/hardware/scoop.h>
-#include <asm/arch/pxa-regs.h>
-#include <asm/arch/hardware.h>
-#include <asm/arch/corgi.h>
-#include <asm/arch/audio.h>
+#include <mach/pxa-regs.h>
+#include <mach/hardware.h>
+#include <mach/corgi.h>
+#include <mach/audio.h>
 
 #include "../codecs/wm8731.h"
 #include "pxa2xx-pcm.h"
diff --git a/sound/soc/pxa/e800_wm9712.c b/sound/soc/pxa/e800_wm9712.c
index 06e8afb25277..6781c5be242f 100644
--- a/sound/soc/pxa/e800_wm9712.c
+++ b/sound/soc/pxa/e800_wm9712.c
@@ -21,9 +21,9 @@
 #include <sound/soc-dapm.h>
 
 #include <asm/mach-types.h>
-#include <asm/arch/pxa-regs.h>
-#include <asm/arch/hardware.h>
-#include <asm/arch/audio.h>
+#include <mach/pxa-regs.h>
+#include <mach/hardware.h>
+#include <mach/audio.h>
 
 #include "../codecs/wm9712.h"
 #include "pxa2xx-pcm.h"
diff --git a/sound/soc/pxa/em-x270.c b/sound/soc/pxa/em-x270.c
index 02dcac39cdf6..d9c3f7b28be2 100644
--- a/sound/soc/pxa/em-x270.c
+++ b/sound/soc/pxa/em-x270.c
@@ -30,9 +30,9 @@
 #include <sound/soc-dapm.h>
 
 #include <asm/mach-types.h>
-#include <asm/arch/pxa-regs.h>
-#include <asm/arch/hardware.h>
-#include <asm/arch/audio.h>
+#include <mach/pxa-regs.h>
+#include <mach/hardware.h>
+#include <mach/audio.h>
 
 #include "../codecs/wm9712.h"
 #include "pxa2xx-pcm.h"
diff --git a/sound/soc/pxa/poodle.c b/sound/soc/pxa/poodle.c
index 65a4e9a8c39e..a4697f7e2921 100644
--- a/sound/soc/pxa/poodle.c
+++ b/sound/soc/pxa/poodle.c
@@ -26,10 +26,10 @@
 
 #include <asm/mach-types.h>
 #include <asm/hardware/locomo.h>
-#include <asm/arch/pxa-regs.h>
-#include <asm/arch/hardware.h>
-#include <asm/arch/poodle.h>
-#include <asm/arch/audio.h>
+#include <mach/pxa-regs.h>
+#include <mach/hardware.h>
+#include <mach/poodle.h>
+#include <mach/audio.h>
 
 #include "../codecs/wm8731.h"
 #include "pxa2xx-pcm.h"
@@ -85,17 +85,13 @@ static int poodle_startup(struct snd_pcm_substream *substream)
 }
 
 /* we need to unmute the HP at shutdown as the mute burns power on poodle */
-static int poodle_shutdown(struct snd_pcm_substream *substream)
+static void poodle_shutdown(struct snd_pcm_substream *substream)
 {
-	struct snd_soc_pcm_runtime *rtd = substream->private_data;
-	struct snd_soc_codec *codec = rtd->socdev->codec;
-
 	/* set = unmute headphone */
 	locomo_gpio_write(&poodle_locomo_device.dev,
 		POODLE_LOCOMO_GPIO_MUTE_L, 1);
 	locomo_gpio_write(&poodle_locomo_device.dev,
 		POODLE_LOCOMO_GPIO_MUTE_R, 1);
-	return 0;
 }
 
 static int poodle_hw_params(struct snd_pcm_substream *substream,
@@ -232,7 +228,7 @@ static const struct soc_enum poodle_enum[] = {
 	SOC_ENUM_SINGLE_EXT(2, spk_function),
 };
 
-static const snd_kcontrol_new_t wm8731_poodle_controls[] = {
+static const struct snd_kcontrol_new wm8731_poodle_controls[] = {
 	SOC_ENUM_EXT("Jack Function", poodle_enum[0], poodle_get_jack,
 		poodle_set_jack),
 	SOC_ENUM_EXT("Speaker Function", poodle_enum[1], poodle_get_spk,
diff --git a/sound/soc/pxa/pxa2xx-ac97.c b/sound/soc/pxa/pxa2xx-ac97.c
index 059af815ea0c..d94a495bd6bd 100644
--- a/sound/soc/pxa/pxa2xx-ac97.c
+++ b/sound/soc/pxa/pxa2xx-ac97.c
@@ -26,10 +26,10 @@
 
 #include <asm/irq.h>
 #include <linux/mutex.h>
-#include <asm/hardware.h>
-#include <asm/arch/pxa-regs.h>
-#include <asm/arch/pxa2xx-gpio.h>
-#include <asm/arch/audio.h>
+#include <mach/hardware.h>
+#include <mach/pxa-regs.h>
+#include <mach/pxa2xx-gpio.h>
+#include <mach/audio.h>
 
 #include "pxa2xx-pcm.h"
 #include "pxa2xx-ac97.h"
diff --git a/sound/soc/pxa/pxa2xx-i2s.c b/sound/soc/pxa/pxa2xx-i2s.c
index 8f96d87f7b4b..c796b1882776 100644
--- a/sound/soc/pxa/pxa2xx-i2s.c
+++ b/sound/soc/pxa/pxa2xx-i2s.c
@@ -16,15 +16,16 @@
 #include <linux/device.h>
 #include <linux/delay.h>
 #include <linux/clk.h>
+#include <linux/platform_device.h>
 #include <sound/core.h>
 #include <sound/pcm.h>
 #include <sound/initval.h>
 #include <sound/soc.h>
 
-#include <asm/hardware.h>
-#include <asm/arch/pxa-regs.h>
-#include <asm/arch/pxa2xx-gpio.h>
-#include <asm/arch/audio.h>
+#include <mach/hardware.h>
+#include <mach/pxa-regs.h>
+#include <mach/pxa2xx-gpio.h>
+#include <mach/audio.h>
 
 #include "pxa2xx-pcm.h"
 #include "pxa2xx-i2s.h"
@@ -81,7 +82,6 @@ static int pxa2xx_i2s_startup(struct snd_pcm_substream *substream)
 	struct snd_soc_pcm_runtime *rtd = substream->private_data;
 	struct snd_soc_dai *cpu_dai = rtd->dai->cpu_dai;
 
-	clk_i2s = clk_get(NULL, "I2SCLK");
 	if (IS_ERR(clk_i2s))
 		return PTR_ERR(clk_i2s);
 
@@ -152,6 +152,7 @@ static int pxa2xx_i2s_hw_params(struct snd_pcm_substream *substream,
 	pxa_gpio_mode(gpio_bus[pxa_i2s.master].tx);
 	pxa_gpio_mode(gpio_bus[pxa_i2s.master].frm);
 	pxa_gpio_mode(gpio_bus[pxa_i2s.master].clk);
+	BUG_ON(IS_ERR(clk_i2s));
 	clk_enable(clk_i2s);
 	pxa_i2s_wait();
 
@@ -317,6 +318,43 @@ struct snd_soc_dai pxa_i2s_dai = {
 
 EXPORT_SYMBOL_GPL(pxa_i2s_dai);
 
+static int pxa2xx_i2s_probe(struct platform_device *dev)
+{
+	clk_i2s = clk_get(&dev->dev, "I2SCLK");
+	return IS_ERR(clk_i2s) ? PTR_ERR(clk_i2s) : 0;
+}
+
+static int __devexit pxa2xx_i2s_remove(struct platform_device *dev)
+{
+	clk_put(clk_i2s);
+	clk_i2s = ERR_PTR(-ENOENT);
+	return 0;
+}
+
+static struct platform_driver pxa2xx_i2s_driver = {
+	.probe = pxa2xx_i2s_probe,
+	.remove = __devexit_p(pxa2xx_i2s_remove),
+
+	.driver = {
+		.name = "pxa2xx-i2s",
+		.owner = THIS_MODULE,
+	},
+};
+
+static int __init pxa2xx_i2s_init(void)
+{
+	clk_i2s = ERR_PTR(-ENOENT);
+	return platform_driver_register(&pxa2xx_i2s_driver);
+}
+
+static void __exit pxa2xx_i2s_exit(void)
+{
+	platform_driver_unregister(&pxa2xx_i2s_driver);
+}
+
+module_init(pxa2xx_i2s_init);
+module_exit(pxa2xx_i2s_exit);
+
 /* Module information */
 MODULE_AUTHOR("Liam Girdwood, liam.girdwood@wolfsonmicro.com, www.wolfsonmicro.com");
 MODULE_DESCRIPTION("pxa2xx I2S SoC Interface");
diff --git a/sound/soc/pxa/pxa2xx-pcm.c b/sound/soc/pxa/pxa2xx-pcm.c
index 2df03ee5819e..4345f387fe41 100644
--- a/sound/soc/pxa/pxa2xx-pcm.c
+++ b/sound/soc/pxa/pxa2xx-pcm.c
@@ -22,9 +22,9 @@
 #include <sound/soc.h>
 
 #include <asm/dma.h>
-#include <asm/hardware.h>
-#include <asm/arch/pxa-regs.h>
-#include <asm/arch/audio.h>
+#include <mach/hardware.h>
+#include <mach/pxa-regs.h>
+#include <mach/audio.h>
 
 #include "pxa2xx-pcm.h"
 
diff --git a/sound/soc/pxa/spitz.c b/sound/soc/pxa/spitz.c
index 64385797da5d..37cb768fc933 100644
--- a/sound/soc/pxa/spitz.c
+++ b/sound/soc/pxa/spitz.c
@@ -26,10 +26,10 @@
 
 #include <asm/mach-types.h>
 #include <asm/hardware/scoop.h>
-#include <asm/arch/pxa-regs.h>
-#include <asm/arch/hardware.h>
-#include <asm/arch/akita.h>
-#include <asm/arch/spitz.h>
+#include <mach/pxa-regs.h>
+#include <mach/hardware.h>
+#include <mach/akita.h>
+#include <mach/spitz.h>
 #include "../codecs/wm8750.h"
 #include "pxa2xx-pcm.h"
 #include "pxa2xx-i2s.h"
@@ -297,7 +297,7 @@ static int spitz_wm8750_init(struct snd_soc_codec *codec)
 	snd_soc_dapm_disable_pin(codec, "LINPUT3");
 	snd_soc_dapm_disable_pin(codec, "RINPUT3");
 	snd_soc_dapm_disable_pin(codec, "OUT3");
-	snd_soc_dapm_disable_pin(codec, "MONO");
+	snd_soc_dapm_disable_pin(codec, "MONO1");
 
 	/* Add spitz specific controls */
 	for (i = 0; i < ARRAY_SIZE(wm8750_spitz_controls); i++) {
diff --git a/sound/soc/pxa/tosa.c b/sound/soc/pxa/tosa.c
index fe6cca9c9e76..2baaa750f123 100644
--- a/sound/soc/pxa/tosa.c
+++ b/sound/soc/pxa/tosa.c
@@ -29,11 +29,10 @@
 #include <sound/soc-dapm.h>
 
 #include <asm/mach-types.h>
-#include <asm/arch/tosa.h>
-#include <asm/arch/pxa-regs.h>
-#include <asm/arch/hardware.h>
-#include <asm/arch/audio.h>
-#include <asm/arch/tosa.h>
+#include <mach/tosa.h>
+#include <mach/pxa-regs.h>
+#include <mach/hardware.h>
+#include <mach/audio.h>
 
 #include "../codecs/wm9712.h"
 #include "pxa2xx-pcm.h"
diff --git a/sound/soc/s3c24xx/neo1973_wm8753.c b/sound/soc/s3c24xx/neo1973_wm8753.c
index 4d7a9aa15f1a..8089f8ee05c0 100644
--- a/sound/soc/s3c24xx/neo1973_wm8753.c
+++ b/sound/soc/s3c24xx/neo1973_wm8753.c
@@ -24,14 +24,13 @@
 #include <sound/soc-dapm.h>
 #include <sound/tlv.h>
 
-#include <asm/mach-types.h>
 #include <asm/hardware/scoop.h>
-#include <asm/arch/regs-clock.h>
-#include <asm/arch/regs-gpio.h>
-#include <asm/hardware.h>
-#include <asm/arch/audio.h>
+#include <mach/regs-clock.h>
+#include <mach/regs-gpio.h>
+#include <mach/hardware.h>
+#include <mach/audio.h>
 #include <linux/io.h>
-#include <asm/arch/spi-gpio.h>
+#include <mach/spi-gpio.h>
 
 #include <asm/plat-s3c24xx/regs-iis.h>
 
diff --git a/sound/soc/s3c24xx/s3c2412-i2s.c b/sound/soc/s3c24xx/s3c2412-i2s.c
index ee4676ed1283..ded7d995a922 100644
--- a/sound/soc/s3c24xx/s3c2412-i2s.c
+++ b/sound/soc/s3c24xx/s3c2412-i2s.c
@@ -28,16 +28,16 @@
 #include <sound/pcm_params.h>
 #include <sound/initval.h>
 #include <sound/soc.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 
 #include <linux/io.h>
 #include <asm/dma.h>
 
 #include <asm/plat-s3c24xx/regs-s3c2412-iis.h>
 
-#include <asm/arch/regs-gpio.h>
-#include <asm/arch/audio.h>
-#include <asm/arch/dma.h>
+#include <mach/regs-gpio.h>
+#include <mach/audio.h>
+#include <mach/dma.h>
 
 #include "s3c24xx-pcm.h"
 #include "s3c2412-i2s.h"
diff --git a/sound/soc/s3c24xx/s3c2443-ac97.c b/sound/soc/s3c24xx/s3c2443-ac97.c
index 783349b7fede..19c5c3cf5d8c 100644
--- a/sound/soc/s3c24xx/s3c2443-ac97.c
+++ b/sound/soc/s3c24xx/s3c2443-ac97.c
@@ -27,13 +27,13 @@
 #include <sound/initval.h>
 #include <sound/soc.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/plat-s3c/regs-ac97.h>
-#include <asm/arch/regs-gpio.h>
-#include <asm/arch/regs-clock.h>
-#include <asm/arch/audio.h>
+#include <mach/regs-gpio.h>
+#include <mach/regs-clock.h>
+#include <mach/audio.h>
 #include <asm/dma.h>
-#include <asm/arch/dma.h>
+#include <mach/dma.h>
 
 #include "s3c24xx-pcm.h"
 #include "s3c24xx-ac97.h"
diff --git a/sound/soc/s3c24xx/s3c24xx-i2s.c b/sound/soc/s3c24xx/s3c24xx-i2s.c
index 397524282b57..ba4476b55fbc 100644
--- a/sound/soc/s3c24xx/s3c24xx-i2s.c
+++ b/sound/soc/s3c24xx/s3c24xx-i2s.c
@@ -27,12 +27,12 @@
 #include <sound/initval.h>
 #include <sound/soc.h>
 
-#include <asm/hardware.h>
-#include <asm/arch/regs-gpio.h>
-#include <asm/arch/regs-clock.h>
-#include <asm/arch/audio.h>
+#include <mach/hardware.h>
+#include <mach/regs-gpio.h>
+#include <mach/regs-clock.h>
+#include <mach/audio.h>
 #include <asm/dma.h>
-#include <asm/arch/dma.h>
+#include <mach/dma.h>
 
 #include <asm/plat-s3c24xx/regs-iis.h>
 
diff --git a/sound/soc/s3c24xx/s3c24xx-pcm.c b/sound/soc/s3c24xx/s3c24xx-pcm.c
index cef79b34dc6f..e13e614bada9 100644
--- a/sound/soc/s3c24xx/s3c24xx-pcm.c
+++ b/sound/soc/s3c24xx/s3c24xx-pcm.c
@@ -27,9 +27,9 @@
 #include <sound/soc.h>
 
 #include <asm/dma.h>
-#include <asm/hardware.h>
-#include <asm/arch/dma.h>
-#include <asm/arch/audio.h>
+#include <mach/hardware.h>
+#include <mach/dma.h>
+#include <mach/audio.h>
 
 #include "s3c24xx-pcm.h"
 
diff --git a/sound/soc/soc-dapm.c b/sound/soc/soc-dapm.c
index 2c87061c2a6b..f9d100bc8479 100644
--- a/sound/soc/soc-dapm.c
+++ b/sound/soc/soc-dapm.c
@@ -470,6 +470,7 @@ int dapm_reg_event(struct snd_soc_dapm_widget *w,
 
 	return 0;
 }
+EXPORT_SYMBOL_GPL(dapm_reg_event);
 
 /*
  * Scan each dapm widget for complete audio path.
@@ -523,24 +524,6 @@ static int dapm_power_widgets(struct snd_soc_codec *codec, int event)
 				continue;
 			}
 
-			/* programmable gain/attenuation */
-			if (w->id == snd_soc_dapm_pga) {
-				int on;
-				in = is_connected_input_ep(w);
-				dapm_clear_walk(w->codec);
-				out = is_connected_output_ep(w);
-				dapm_clear_walk(w->codec);
-				w->power = on = (out != 0 && in != 0) ? 1 : 0;
-
-				if (!on)
-					dapm_set_pga(w, on); /* lower volume to reduce pops */
-				dapm_update_bits(w);
-				if (on)
-					dapm_set_pga(w, on); /* restore volume from zero */
-
-				continue;
-			}
-
 			/* pre and post event widgets */
 			if (w->id == snd_soc_dapm_pre) {
 				if (!w->event)
@@ -586,45 +569,56 @@ static int dapm_power_widgets(struct snd_soc_codec *codec, int event)
 			power_change = (w->power == power) ? 0: 1;
 			w->power = power;
 
+			if (!power_change)
+				continue;
+
 			/* call any power change event handlers */
-			if (power_change) {
-				if (w->event) {
-					pr_debug("power %s event for %s flags %x\n",
-						 w->power ? "on" : "off", w->name, w->event_flags);
-					if (power) {
-						/* power up event */
-						if (w->event_flags & SND_SOC_DAPM_PRE_PMU) {
-							ret = w->event(w,
-								NULL, SND_SOC_DAPM_PRE_PMU);
-							if (ret < 0)
-								return ret;
-						}
-						dapm_update_bits(w);
-						if (w->event_flags & SND_SOC_DAPM_POST_PMU){
-							ret = w->event(w,
-								NULL, SND_SOC_DAPM_POST_PMU);
-							if (ret < 0)
-								return ret;
-						}
-					} else {
-						/* power down event */
-						if (w->event_flags & SND_SOC_DAPM_PRE_PMD) {
-							ret = w->event(w,
-								NULL, SND_SOC_DAPM_PRE_PMD);
-							if (ret < 0)
-								return ret;
-						}
-						dapm_update_bits(w);
-						if (w->event_flags & SND_SOC_DAPM_POST_PMD) {
-							ret = w->event(w,
-								NULL, SND_SOC_DAPM_POST_PMD);
-							if (ret < 0)
-								return ret;
-						}
-					}
-				} else
-					/* no event handler */
-					dapm_update_bits(w);
+			if (w->event)
+				pr_debug("power %s event for %s flags %x\n",
+					 w->power ? "on" : "off",
+					 w->name, w->event_flags);
+
+			/* power up pre event */
+			if (power && w->event &&
+			    (w->event_flags & SND_SOC_DAPM_PRE_PMU)) {
+				ret = w->event(w, NULL, SND_SOC_DAPM_PRE_PMU);
+				if (ret < 0)
+					return ret;
+			}
+
+			/* power down pre event */
+			if (!power && w->event &&
+			    (w->event_flags & SND_SOC_DAPM_PRE_PMD)) {
+				ret = w->event(w, NULL, SND_SOC_DAPM_PRE_PMD);
+				if (ret < 0)
+					return ret;
+			}
+
+			/* Lower PGA volume to reduce pops */
+			if (w->id == snd_soc_dapm_pga && !power)
+				dapm_set_pga(w, power);
+
+			dapm_update_bits(w);
+
+			/* Raise PGA volume to reduce pops */
+			if (w->id == snd_soc_dapm_pga && power)
+				dapm_set_pga(w, power);
+
+			/* power up post event */
+			if (power && w->event &&
+			    (w->event_flags & SND_SOC_DAPM_POST_PMU)) {
+				ret = w->event(w,
+					       NULL, SND_SOC_DAPM_POST_PMU);
+				if (ret < 0)
+					return ret;
+			}
+
+			/* power down post event */
+			if (!power && w->event &&
+			    (w->event_flags & SND_SOC_DAPM_POST_PMD)) {
+				ret = w->event(w, NULL, SND_SOC_DAPM_POST_PMD);
+				if (ret < 0)
+					return ret;
 			}
 		}
 	}
diff --git a/virt/kvm/kvm_main.c b/virt/kvm/kvm_main.c
index a845890b6800..7dd9b0b85e4e 100644
--- a/virt/kvm/kvm_main.c
+++ b/virt/kvm/kvm_main.c
@@ -192,6 +192,123 @@ void kvm_vcpu_uninit(struct kvm_vcpu *vcpu)
 }
 EXPORT_SYMBOL_GPL(kvm_vcpu_uninit);
 
+#if defined(CONFIG_MMU_NOTIFIER) && defined(KVM_ARCH_WANT_MMU_NOTIFIER)
+static inline struct kvm *mmu_notifier_to_kvm(struct mmu_notifier *mn)
+{
+	return container_of(mn, struct kvm, mmu_notifier);
+}
+
+static void kvm_mmu_notifier_invalidate_page(struct mmu_notifier *mn,
+					     struct mm_struct *mm,
+					     unsigned long address)
+{
+	struct kvm *kvm = mmu_notifier_to_kvm(mn);
+	int need_tlb_flush;
+
+	/*
+	 * When ->invalidate_page runs, the linux pte has been zapped
+	 * already but the page is still allocated until
+	 * ->invalidate_page returns. So if we increase the sequence
+	 * here the kvm page fault will notice if the spte can't be
+	 * established because the page is going to be freed. If
+	 * instead the kvm page fault establishes the spte before
+	 * ->invalidate_page runs, kvm_unmap_hva will release it
+	 * before returning.
+	 *
+	 * The sequence increase only need to be seen at spin_unlock
+	 * time, and not at spin_lock time.
+	 *
+	 * Increasing the sequence after the spin_unlock would be
+	 * unsafe because the kvm page fault could then establish the
+	 * pte after kvm_unmap_hva returned, without noticing the page
+	 * is going to be freed.
+	 */
+	spin_lock(&kvm->mmu_lock);
+	kvm->mmu_notifier_seq++;
+	need_tlb_flush = kvm_unmap_hva(kvm, address);
+	spin_unlock(&kvm->mmu_lock);
+
+	/* we've to flush the tlb before the pages can be freed */
+	if (need_tlb_flush)
+		kvm_flush_remote_tlbs(kvm);
+
+}
+
+static void kvm_mmu_notifier_invalidate_range_start(struct mmu_notifier *mn,
+						    struct mm_struct *mm,
+						    unsigned long start,
+						    unsigned long end)
+{
+	struct kvm *kvm = mmu_notifier_to_kvm(mn);
+	int need_tlb_flush = 0;
+
+	spin_lock(&kvm->mmu_lock);
+	/*
+	 * The count increase must become visible at unlock time as no
+	 * spte can be established without taking the mmu_lock and
+	 * count is also read inside the mmu_lock critical section.
+	 */
+	kvm->mmu_notifier_count++;
+	for (; start < end; start += PAGE_SIZE)
+		need_tlb_flush |= kvm_unmap_hva(kvm, start);
+	spin_unlock(&kvm->mmu_lock);
+
+	/* we've to flush the tlb before the pages can be freed */
+	if (need_tlb_flush)
+		kvm_flush_remote_tlbs(kvm);
+}
+
+static void kvm_mmu_notifier_invalidate_range_end(struct mmu_notifier *mn,
+						  struct mm_struct *mm,
+						  unsigned long start,
+						  unsigned long end)
+{
+	struct kvm *kvm = mmu_notifier_to_kvm(mn);
+
+	spin_lock(&kvm->mmu_lock);
+	/*
+	 * This sequence increase will notify the kvm page fault that
+	 * the page that is going to be mapped in the spte could have
+	 * been freed.
+	 */
+	kvm->mmu_notifier_seq++;
+	/*
+	 * The above sequence increase must be visible before the
+	 * below count decrease but both values are read by the kvm
+	 * page fault under mmu_lock spinlock so we don't need to add
+	 * a smb_wmb() here in between the two.
+	 */
+	kvm->mmu_notifier_count--;
+	spin_unlock(&kvm->mmu_lock);
+
+	BUG_ON(kvm->mmu_notifier_count < 0);
+}
+
+static int kvm_mmu_notifier_clear_flush_young(struct mmu_notifier *mn,
+					      struct mm_struct *mm,
+					      unsigned long address)
+{
+	struct kvm *kvm = mmu_notifier_to_kvm(mn);
+	int young;
+
+	spin_lock(&kvm->mmu_lock);
+	young = kvm_age_hva(kvm, address);
+	spin_unlock(&kvm->mmu_lock);
+
+	if (young)
+		kvm_flush_remote_tlbs(kvm);
+
+	return young;
+}
+
+static const struct mmu_notifier_ops kvm_mmu_notifier_ops = {
+	.invalidate_page	= kvm_mmu_notifier_invalidate_page,
+	.invalidate_range_start	= kvm_mmu_notifier_invalidate_range_start,
+	.invalidate_range_end	= kvm_mmu_notifier_invalidate_range_end,
+	.clear_flush_young	= kvm_mmu_notifier_clear_flush_young,
+};
+#endif /* CONFIG_MMU_NOTIFIER && KVM_ARCH_WANT_MMU_NOTIFIER */
+
 static struct kvm *kvm_create_vm(void)
 {
 	struct kvm *kvm = kvm_arch_create_vm();
@@ -212,6 +329,21 @@ static struct kvm *kvm_create_vm(void)
 			(struct kvm_coalesced_mmio_ring *)page_address(page);
 #endif
 
+#if defined(CONFIG_MMU_NOTIFIER) && defined(KVM_ARCH_WANT_MMU_NOTIFIER)
+	{
+		int err;
+		kvm->mmu_notifier.ops = &kvm_mmu_notifier_ops;
+		err = mmu_notifier_register(&kvm->mmu_notifier, current->mm);
+		if (err) {
+#ifdef KVM_COALESCED_MMIO_PAGE_OFFSET
+			put_page(page);
+#endif
+			kfree(kvm);
+			return ERR_PTR(err);
+		}
+	}
+#endif
+
 	kvm->mm = current->mm;
 	atomic_inc(&kvm->mm->mm_count);
 	spin_lock_init(&kvm->mmu_lock);
@@ -272,6 +404,9 @@ static void kvm_destroy_vm(struct kvm *kvm)
 	if (kvm->coalesced_mmio_ring != NULL)
 		free_page((unsigned long)kvm->coalesced_mmio_ring);
 #endif
+#if defined(CONFIG_MMU_NOTIFIER) && defined(KVM_ARCH_WANT_MMU_NOTIFIER)
+	mmu_notifier_unregister(&kvm->mmu_notifier, kvm->mm);
+#endif
 	kvm_arch_destroy_vm(kvm);
 	mmdrop(mm);
 }
@@ -375,7 +510,15 @@ int __kvm_set_memory_region(struct kvm *kvm,
 		memset(new.rmap, 0, npages * sizeof(*new.rmap));
 
 		new.user_alloc = user_alloc;
-		new.userspace_addr = mem->userspace_addr;
+		/*
+		 * hva_to_rmmap() serialzies with the mmu_lock and to be
+		 * safe it has to ignore memslots with !user_alloc &&
+		 * !userspace_addr.
+		 */
+		if (user_alloc)
+			new.userspace_addr = mem->userspace_addr;
+		else
+			new.userspace_addr = 0;
 	}
 	if (npages && !new.lpage_info) {
 		int largepages = npages / KVM_PAGES_PER_HPAGE;
@@ -408,17 +551,21 @@ int __kvm_set_memory_region(struct kvm *kvm,
 	}
 #endif /* not defined CONFIG_S390 */
 
-	if (mem->slot >= kvm->nmemslots)
-		kvm->nmemslots = mem->slot + 1;
-
 	if (!npages)
 		kvm_arch_flush_shadow(kvm);
 
+	spin_lock(&kvm->mmu_lock);
+	if (mem->slot >= kvm->nmemslots)
+		kvm->nmemslots = mem->slot + 1;
+
 	*memslot = new;
+	spin_unlock(&kvm->mmu_lock);
 
 	r = kvm_arch_set_memory_region(kvm, mem, old, user_alloc);
 	if (r) {
+		spin_lock(&kvm->mmu_lock);
 		*memslot = old;
+		spin_unlock(&kvm->mmu_lock);
 		goto out_free;
 	}